WorldWideScience

Sample records for viable prototype model

  1. A viable dark fluid model

    Science.gov (United States)

    Elkhateeb, Esraa

    2018-01-01

    We consider a cosmological model based on a generalization of the equation of state proposed by Nojiri and Odintsov (2004) and Štefančić (2005, 2006). We argue that this model works as a dark fluid model which can interpolate between dust equation of state and the dark energy equation of state. We show how the asymptotic behavior of the equation of state constrained the parameters of the model. The causality condition for the model is also studied to constrain the parameters and the fixed points are tested to determine different solution classes. Observations of Hubble diagram of SNe Ia supernovae are used to further constrain the model. We present an exact solution of the model and calculate the luminosity distance and the energy density evolution. We also calculate the deceleration parameter to test the state of the universe expansion.

  2. Role model and prototype matching

    DEFF Research Database (Denmark)

    Lykkegaard, Eva; Ulriksen, Lars

    2016-01-01

    Previous research has found that young people’s prototypes of science students and scientists affect their inclination to choose tertiary STEM programs (Science, Technology, Engineering and Mathematics). Consequently, many recruitment initiatives include role models to challenge these prototypes......’ meetings with the role models affected their thoughts concerning STEM students and attending university. The regular self-to-prototype matching process was shown in real-life role-models meetings to be extended to a more complex three-way matching process between students’ self-perceptions, prototype...... images and situation-specific conceptions of role models. Furthermore, the study underlined the positive effect of prolonged role-model contact, the importance of using several role models and that traditional school subjects catered more resistant prototype images than unfamiliar ones did...

  3. From Prototype to Product: Making Participatory Design of mHealth Commercially Viable.

    Science.gov (United States)

    Andersen, Tariq O; Bansler, Jørgen P; Kensing, Finn; Moll, Jonas

    2017-01-01

    This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product. In particular, we draw attention to four major challenges of (a) aligning the different concerns of patients and clinicians, (b) designing according to clinical accountability, (c) ensuring commercial interest, and (d) dealing with regulatory constraints when prototyping safety critical health Information Technology. Using four illustrative cases, we discuss what these challenges entail and the implications they pose to Participatory Design. We conclude the paper by presenting lessons learned.

  4. Designing Viable Business Models for Living Labs

    Directory of Open Access Journals (Sweden)

    Bernhard R. Katzy

    2012-09-01

    Full Text Available Over 300 regions have integrated the concept of living labs into their economic development strategy since 2006, when the former Finnish Prime Minister Esko Aho launched the living lab innovation policy initiative during his term of European presidency. Despite motivating initial results, however, success cases of turning research into usable new products and services remain few and uncertainty remains on what living labs actually do and contribute. This practitioner-oriented article presents a business excellence model that shows processes of idea creation and team mobilization, new product development, user involvement, and entrepreneurship through which living labs deliver high-potential investment opportunities. Customers of living labs are identified as investors such as venture capitalists or industrial firms because living labs can generate revenue from them to create their own sustainable business model. The article concludes that living labs provide extensive support “lab” infrastructure and that it remains a formidable challenge to finance it, which calls for a more intensive debate.

  5. A viable logarithmic f(R) model for inflation

    Energy Technology Data Exchange (ETDEWEB)

    Amin, M.; Khalil, S. [Center for Fundamental Physics, Zewail City of Science and Technology,6 October City, Giza (Egypt); Salah, M. [Center for Fundamental Physics, Zewail City of Science and Technology,6 October City, Giza (Egypt); Department of Mathematics, Faculty of Science, Cairo University,Giza (Egypt)

    2016-08-18

    Inflation in the framework of f(R) modified gravity is revisited. We study the conditions that f(R) should satisfy in order to lead to a viable inflationary model in the original form and in the Einstein frame. Based on these criteria we propose a new logarithmic model as a potential candidate for f(R) theories aiming to describe inflation consistent with observations from Planck satellite (2015). The model predicts scalar spectral index 0.9615models, a natural coupling between inflation and a scalar boson is generated through the minimal coupling between gravity and matter fields and a reheating temperature less that 10{sup 9} GeV is obtained.

  6. Towards viable cosmological models of disformal theories of gravity

    Science.gov (United States)

    Sakstein, Jeremy

    2015-01-01

    The late-time cosmological dynamics of disformal gravity are investigated using dynamical systems methods. It is shown that in the general case there are no stable attractors that screen fifth forces locally and simultaneously describe a dark energy dominated universe. Viable scenarios have late-time properties that are independent of the disformal parameters and are identical to the equivalent conformal quintessence model. Our analysis reveals that configurations where the Jordan frame metric becomes singular are only reached in the infinite future, thus explaining the natural pathology resistance observed numerically by several previous works. The viability of models where this can happen is discussed in terms of both the cosmological dynamics and local phenomena. We identify a special parameter tuning such that there is a new fixed point that can match the presently observed dark energy density and equation of state. This model is unviable when the scalar couples to the visible sector but may provide a good candidate model for theories where only dark matter is disformally coupled.

  7. Modelling and Control of the Wavestar Prototype

    DEFF Research Database (Denmark)

    Hansen, Rico Hjerm; Kramer, Morten M.

    2011-01-01

    Algorithm (WPEA), applied to the full-scale Wavestar Prototype for maximizing energy extraction. The WPEA is optimized based on simulations of the point absorbers in different sea states. Hence, a presentation of a hydrodynamic model of the Wavestar is included in the paper. A simplified Power Take-Off (PTO......) is also added to the model, enabling the optimization of the WPEA to take into account the PTO constraints of PTO bandwidth and force limitations. The predicted results of the optimized WPEA are compared to real measurements from theWavestar Prototype, showing good compliance....

  8. Prototype-based models in machine learning

    NARCIS (Netherlands)

    Biehl, Michael; Hammer, Barbara; Villmann, Thomas

    2016-01-01

    An overview is given of prototype-based models in machine learning. In this framework, observations, i.e., data, are stored in terms of typical representatives. Together with a suitable measure of similarity, the systems can be employed in the context of unsupervised and supervised analysis of

  9. The Conceptual Mechanism for Viable Organizational Learning Based on Complex System Theory and the Viable System Model

    Science.gov (United States)

    Sung, Dia; You, Yeongmahn; Song, Ji Hoon

    2008-01-01

    The purpose of this research is to explore the possibility of viable learning organizations based on identifying viable organizational learning mechanisms. Two theoretical foundations, complex system theory and viable system theory, have been integrated to provide the rationale for building the sustainable organizational learning mechanism. The…

  10. Modelling perceptual characteristics of prototype headphones

    DEFF Research Database (Denmark)

    Volk, Christer Peter; Pedersen, Torben Holm; Bech, Søren

    2016-01-01

    This study tested a framework for modelling of sensory descriptors (words) differentiating headphones. Six descriptors were included in a listening test with recordings of the sound reproductions of seven prototype headphones. A comprehensive data quality analysis investigated both the performance...... of the listeners and the suitability of the descriptors for modelling. Additionally, two strategies were utilised for modelling metrics describing these descriptors, both relying on specific loudness stimations of the listening test stimuli. The stability of the initially found metrics was tested to quantify...... the potential of the metrics for future predictions within the perceptual space spanned by the headphones....

  11. Cybernetically sound organizational structures II: Relating de Sitter's design theory to Beer's viable system model

    NARCIS (Netherlands)

    Achterbergh, J.M.I.M.; Vriens, D.J.

    2011-01-01

    - Purpose – The purpose of this paper is to show how the viable system model (VSM) and de Sitter's design theory can complement each other in the context of the diagnosis and design of viable organizations. - Design/methodology/approach – Key concepts from Beer's model and de Sitter's design

  12. Prototyping of cerebral vasculature physical models.

    Science.gov (United States)

    Khan, Imad S; Kelly, Patrick D; Singer, Robert J

    2014-01-01

    Prototyping of cerebral vasculature models through stereolithographic methods have the ability to accurately depict the 3D structures of complicated aneurysms with high accuracy. We describe the method to manufacture such a model and review some of its uses in the context of treatment planning, research, and surgical training. We prospectively used the data from the rotational angiography of a 40-year-old female who presented with an unruptured right paraclinoid aneurysm. The 3D virtual model was then converted to a physical life-sized model. The model constructed was shown to be a very accurate depiction of the aneurysm and its associated vasculature. It was found to be useful, among other things, for surgical training and as a patient education tool. With improving and more widespread printing options, these models have the potential to become an important part of research and training modalities.

  13. Investigating the role of implicit prototypes in the prototype willingness model.

    Science.gov (United States)

    Howell, Jennifer L; Ratliff, Kate A

    2017-06-01

    One useful theory to predict health behavior is the prototype-willingness model (PWM), which posits that people are more willing to engage in behavior to the extent that they have a positive view of the prototypical person who performs that behavior. The goal of the present research is to test whether adding an implicit measure of prototype favorability might improve explanatory power in the PWM. Two studies examined whether implicit prototype favorability uniquely predicted White women's intentions to engage in healthy sun behavior over the next 3-6 months, and their willingness to engage in risky sun behavior, should the opportunity arise. The results suggested that implicit prototype favorability, particularly implicit prototypes of those who engage in risky UV-related behaviors, uniquely predicted intentions to engage in healthy sun behavior and willingness to engage in risky sun behavior in the PWM.

  14. Prototype models for the MOIRA computerised system

    Energy Technology Data Exchange (ETDEWEB)

    Monte, Luigi [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente; Hakanson, Lars [Uppsala, Univ. (Sweden). Institute of Earth Sciences; Brittain, John [Oslo, Univ. (Norway). Zoological Museum

    1997-06-01

    The main aim of the present report is to describe selected models and the principles of the Decision Analysis theory that will be applied to develop the model-based computerised system `MOIRA`. A dose model and a model for predicting radiocaesium migration in lakes and the effects of countermeasures to reduce the contamination levels in the components of lacustrine system are described in detail. The principles for developing prototype models for predicting the migration of {sup 90}Sr in lake abiotic and biotic components are discussed. The environmental models described in the report are based on the use of `collective parameters` which due to mutual compensation effects of different phenomena occurring in complex systems, show low variability when the environmental conditions change. Use of such `collective parameters` not only increases the predictive power of the models, but also increases the practical applicability of the model. Among the main results described in the report, the development of an objective hierarchy table for evaluating the effectiveness of a countermeasure when the economic, social and ecological impacts are accounted for, deserves special attention.

  15. Prototyping

    OpenAIRE

    Corsín Jiménez, Alberto

    2017-01-01

    The prototyping of method calls for, at a minimum, three operations of design: rethinking the proprietary and legal economy of research; rethinking the frontiers that separate those who use methods from those to whom methods are applied to; designing infrastructures of apprenticeships for every problem.

  16. Rapid prototype modeling in a multimodality world

    Science.gov (United States)

    Bidaut, Luc; Madewell, John; Yasko, Alan

    2006-03-01

    Introduction: Rapid prototype modeling (RPM) has been used in medicine principally for bones - that are easily extracted from CT data sets - for planning orthopaedic, plastic or maxillo-facial interventions, and/or for designing custom prostheses and implants. Based on newly available technology, highly valuable multimodality approaches can now be applied to RPM, particularly for complex musculo-skeletal (MSK) tumors where multimodality often transcends CT alone. Methods: CT data sets are acquired for primary evaluation of MSK tumors in parallel with other modalities (e.g., MR, PET, SPECT). In our approach, CT is first segmented to provide bony anatomy for RPM and all other data sets are then registered to the CT reference. Parametric information relevant to the tumor's characterization is then extracted from the multimodality space and merged with the CT anatomy to produce a hybrid RPM-ready model. This model - that also accommodates digital multimodality visualization - is then produced on the latest generation of 3D printers, which permits both shapes and colors. Results: Multimodality models of complex MSK tumors have been physically produced on modern RPM equipment. This new approach has been found to be a clear improvement over the previously disconnected physical RPM and digital multimodality visualization. Conclusions: New technical developments keep opening doors to sophisticated medical applications that can directly impact the quality of patient care. Although this early work still deals with bones as base models for RPM, its use to encompass soft tissues is already envisioned for future approaches.

  17. Viable business models for public utilities; Zukunftsfaehige Geschaeftsmodelle fuer Stadtwerke

    Energy Technology Data Exchange (ETDEWEB)

    Gebhardt, Andreas; Weiss, Claudia [Buelow und Consorten GmbH, Hamburg (Germany)

    2013-04-15

    Small suppliers are faced with mounting pressures from an increasingly complex regulatory regime and a market that rewards size. Many have been able to adapt to the new framework conditions by successively optimizing existing activities. However, when change takes hold of all stages of the value chain it is no longer enough to merely modify one's previous strategies. It rather becomes necessary to review one's business model for its sustainability, take stock of the company's competencies and set priorities along the value chain. This is where a network-oriented focussing strategy can assist in ensuring efficient delivery of services in core areas while enabling the company to present itself on the market with a full range of services.

  18. Affective Robotics: Modelling and Testing Cultural Prototypes.

    Science.gov (United States)

    A Wilson, Paul; Lewandowska-Tomaszczyk, Barbara

    2014-01-01

    If robots are to successfully interact with humans, they need to measure, quantify and respond to the emotions we produce. Similar to humans, the perceptual cue inputs to any modelling that allows this will be based on behavioural expression and body activity features that are prototypical of each emotion. However, the likely employment of such robots in different cultures necessitates the tuning of the emotion feature recognition system to the specific feature profiles present in these cultures. The amount of tuning depends on the relative convergence of the cross-cultural mappings between the emotion feature profiles of the cultures where the robots will be used. The GRID instrument and the cognitive corpus linguistics methodology were used in a contrastive study analysing a selection of behavioural expression and body activity features to compare the feature profiles of joy, sadness, fear and anger within and between Polish and British English. The intra-linguistic differences that were found in the profile of emotion features suggest that weightings based on this profile can be used in robotic modelling to create emotion-sensitive socially interacting robots. Our cross-cultural results further indicate that this profile of features needs to be tuned in robots to make them emotionally competent in different cultures.

  19. [Viable myocardium detecting by CARTO voltage mapping in swine model of acute myocardial infarction].

    Science.gov (United States)

    Lin, Tao; Ma, Yi-Tong; Yang, Yi-Ning; Mu, Hu-Yati; He, Peng-Yi; Yang, Yu-Chun; Chou, Ping; Liu, Fen; Zhang, Yan-Yi

    2010-08-01

    To evaluate the accuracy and practicability of detecting viable myocardium by CARTO voltage mapping in swine model of acute myocardial infarction (MI). MI was induced in 13 anesthetized swines via occluding the distal of left anterior descending coronary arteries by angioplasty balloon for 60-90 minutes. The viable myocardium detection by CARTO voltage mapping was made after reconstruction of the left ventricle using CARTO and the results were compared with TTC staining. The standard of CARTO voltage to detect viable myocardium was 0.5 - 1.5 mV while viable myocardium showed pink color by TTC staining. Eleven out of 13 swines survived the operation and 2 swines died of ventricular fibrillation at 45 and 65 minutes post ischemia. Left ventricle was divided into 16 segments and 176 segments from 11 swines were analyzed. Viable myocardium detected by CARTO voltage mapping was identical as identified by TTC staining (Kappa = 0.816, P < 0.001). Taken the TTC result as standard, the sensitivity, specificity and accuracy rate of CARTO voltage mapping are 71.8%, 96.5% and 90.9% respectively. CARTO voltage mapping could be used as a reliable tool to detect viable myocardium in this model.

  20. Enhancements to ASHRAE Standard 90.1 Prototype Building Models

    Energy Technology Data Exchange (ETDEWEB)

    Goel, Supriya; Athalye, Rahul A.; Wang, Weimin; Zhang, Jian; Rosenberg, Michael I.; Xie, YuLong; Hart, Philip R.; Mendon, Vrushali V.

    2014-04-16

    This report focuses on enhancements to prototype building models used to determine the energy impact of various versions of ANSI/ASHRAE/IES Standard 90.1. Since the last publication of the prototype building models, PNNL has made numerous enhancements to the original prototype models compliant with the 2004, 2007, and 2010 editions of Standard 90.1. Those enhancements are described here and were made for several reasons: (1) to change or improve prototype design assumptions; (2) to improve the simulation accuracy; (3) to improve the simulation infrastructure; and (4) to add additional detail to the models needed to capture certain energy impacts from Standard 90.1 improvements. These enhancements impact simulated prototype energy use, and consequently impact the savings estimated from edition to edition of Standard 90.1.

  1. Issues of organizational cybernetics and viability beyond Beer's viable systems model

    Science.gov (United States)

    Nechansky, Helmut

    2013-11-01

    The paper starts summarizing the claims of Beer's viable systems model to identify five issues any viable organizations has to deal with in an unequivocal hierarchical structure of five interrelated systems. Then the evidence is introduced for additional issues and related viable structures of organizations, which deviate from Beer's model. These issues are: (1) the establishment and (2) evolution of an organization; (3) systems for independent top-down control (like "Six Sigma"); (4) systems for independent bottom-up correction of performance problems (like "Kaizen"), both working outside a hierarchical structure; (5) pull production systems ("Just in Time") and (6) systems for checks and balances of top-level power (like boards and shareholder meetings). Based on that an evolutionary approach to organizational cybernetics is outlined, addressing the establishment of organizations and possible courses of developments, including recent developments in quality and production engineering, as well as problems of setting and changing goal values determining organizational policies.

  2. Viable Techniques, Leontief’s Closed Model, and Sraffa’s Subsistence Economies

    Directory of Open Access Journals (Sweden)

    Alberto Benítez

    2014-11-01

    Full Text Available This paper studies the production techniques employed in economies that reproduce themselves. Special attention is paid to the distinction usually made between those that do not produce a surplus and those that do, which are referred to as first and second class economies, respectively. Based on this, we present a new definition of viable economies and show that every viable economy of the second class can be represented as a viable economy of the first class under two different forms, Leontief‘s closed model and Sraffa’s subsistence economies. This allows us to present some remarks concerning the economic interpretation of the two models. On the one hand, we argue that the participation of each good in the production of every good can be considered as a normal characteristic of the first model and, on the other hand, we provide a justification for the same condition to be considered a characteristic of the second model. Furthermore, we discuss three definitions of viable techniques advanced by other authors and show that they differ from ours because they admit economies that do not reproduce themselves completely.

  3. Modelling the number of viable vegetative cells of Bacillus cereus passing through the stomach

    NARCIS (Netherlands)

    Wijnands, L.M.; Pielaat, A.; Dufrenne, J.B.; Zwietering, M.H.; Leusden, van F.M.

    2009-01-01

    Aims: Model the number of viable vegetative cells of B. cereus surviving the gastric passage after experiments in simulated gastric conditions. Materials and Methods: The inactivation of stationary and exponential phase vegetative cells of twelve different strains of Bacillus cereus, both mesophilic

  4. Prototype of a Coupled Mesoscale-Microscale Modeling System

    National Research Council Canada - National Science Library

    Luces, Saba A; Cionco, Ronald M

    2006-01-01

    .... A step-wise approach was employed to develop a modular prototype that would first show improved winds using high-resolution diagnostic models, but then be capable of interchanging various components...

  5. Prototype Willingness Model Drinking Cognitions Mediate Personalized Normative Feedback Efficacy.

    Science.gov (United States)

    Lewis, Melissa A; Litt, Dana M; Tomkins, Mary; Neighbors, Clayton

    2017-05-01

    Personalized normative feedback (PNF) interventions have been shown to be efficacious at reducing college student drinking. Because descriptive norms have been shown to mediate PNF efficacy, the current study focused on examining additional prototype willingness model social reaction cognitions, namely, prototypes and willingness, as mediators of intervention efficacy. We expected the PNF interventions to be associated with increased prototype favorability of students who do not drink, which would in turn be associated with decreased willingness to drink and subsequently, less drinking. The current study included 622 college students (53.2% women; 62% Caucasian) who reported one or more heavy drinking episodes in the past month and completed baseline and three-month follow-up assessments. As posited by the framework of the prototype willingness model, sequential mediation analyses were conducted to evaluate increases in abstainer prototype favorability on willingness on drinking, and subsequently willingness to drink on drinking behavior. Mediation results revealed significant indirect effects of PNF on three-month drinking through three-month prototypes and willingness, indicating that the social reaction pathway of the prototype willingness model was supported. Findings have important implications for PNF interventions aiming to reduce high-risk drinking among college students. Study findings suggest that we should consider looking at additional socially-based mediators of PNF efficacy in addition to perceived descriptive norms.

  6. Solid modeling and applications rapid prototyping, CAD and CAE theory

    CERN Document Server

    Um, Dugan

    2016-01-01

    The lessons in this fundamental text equip students with the theory of Computer Assisted Design (CAD), Computer Assisted Engineering (CAE), the essentials of Rapid Prototyping, as well as practical skills needed to apply this understanding in real world design and manufacturing settings. The book includes three main areas: CAD, CAE, and Rapid Prototyping, each enriched with numerous examples and exercises. In the CAD section, Professor Um outlines the basic concept of geometric modeling, Hermite and Bezier Spline curves theory, and 3-dimensional surface theories as well as rendering theory. The CAE section explores mesh generation theory, matrix notion for FEM, the stiffness method, and truss Equations. And in Rapid Prototyping, the author illustrates stereo lithographic theory and introduces popular modern RP technologies. Solid Modeling and Applications: Rapid Prototyping, CAD and CAE Theory is ideal for university students in various engineering disciplines as well as design engineers involved in product...

  7. Molecular approaches for viable bacterial population and transcriptional analyses in a rodent model of dental caries.

    Science.gov (United States)

    Klein, M I; Scott-Anne, K M; Gregoire, S; Rosalen, P L; Koo, H

    2012-10-01

    Culturing methods are the primary approach for microbiological analysis of plaque biofilms in rodent models of dental caries. In this study, we developed strategies for the isolation of DNA and RNA from plaque biofilms formed in vivo to analyse the viable bacterial population and gene expression. Plaque biofilm samples from rats were treated with propidium monoazide to isolate DNA from viable cells, and the purified DNA was used to quantify total bacteria and the Streptococcus mutans population via quantitative polymerase chain reaction (qPCR) and specific primers; the same samples were also analysed by counting colony-forming units (CFU). In parallel, RNA was isolated from plaque-biofilm samples (from the same animals) and used for transcriptional analyses via reverse transcription-qPCR. The viable populations of both S. mutans and total bacteria assessed by qPCR were positively correlated with the CFU data (P  0.8). However, the qPCR data showed higher bacterial cell counts, particularly for total bacteria (vs. CFU). Moreover, S. mutans proportion in the plaque biofilm determined by qPCR analysis showed strong correlation with incidence of smooth-surface caries (P = 0.0022, r = 0.71). The purified RNAs presented high RNA integrity numbers (> 7), which allowed measurement of the expression of genes that are critical for S. mutans virulence (e.g. gtfB and gtfC). Our data show that the viable microbial population and the gene expression can be analysed simultaneously, providing a global assessment of the infectious aspect of dental caries. Our approach could enhance the value of the current rodent model in further understanding the pathophysiology of this disease and facilitating the exploration of novel anti-caries therapies. © 2012 John Wiley & Sons A/S.

  8. Rapid Prototyping of wax foundry models in an incremental process

    Directory of Open Access Journals (Sweden)

    B. Kozik

    2011-04-01

    Full Text Available The paper presents an analysis incremental methods of creating wax founding models. There are two methods of Rapid Prototypingof wax models in an incremental process which are more and more often used in industrial practice and in scientific research.Applying Rapid Prototyping methods in the process of making casts allows for acceleration of work on preparing prototypes. It isespecially important in case of element having complicated shapes. The time of making a wax model depending on the size and the appliedRP method may vary from several to a few dozen hours.

  9. Modeling and prototyping of biometric systems using dataflow programming

    Science.gov (United States)

    Minakova, N.; Petrov, I.

    2018-01-01

    The development of biometric systems is one of the labor-intensive processes. Therefore, the creation and analysis of approaches and techniques is an urgent task at present. This article presents a technique of modeling and prototyping biometric systems based on dataflow programming. The technique includes three main stages: the development of functional blocks, the creation of a dataflow graph and the generation of a prototype. A specially developed software modeling environment that implements this technique is described. As an example of the use of this technique, an example of the implementation of the iris localization subsystem is demonstrated. A variant of modification of dataflow programming is suggested to solve the problem related to the undefined order of block activation. The main advantage of the presented technique is the ability to visually display and design the model of the biometric system, the rapid creation of a working prototype and the reuse of the previously developed functional blocks.

  10. SAMM: a prototype southeast Alaska multiresource model.

    Science.gov (United States)

    Roger D. Fight; Lawrence D. Garrett; Dale L. Weyermann

    1990-01-01

    The adaptive environmental assessment method was used by an interdisciplinary team of forest specialists to gain an understanding of resource interactions and tradeoffs resulting from forest management activities in southeast Alaska. A forest multiresource projection model was developed in the process. The multiresource model, “SAMM,” is capable of characterizing and...

  11. Information Warfare: using the viable system model as a framework to attack organisations

    Directory of Open Access Journals (Sweden)

    Bill Hutchinson

    2002-05-01

    Full Text Available Information is the glue in any organization. It is needed for policy, decision-making, control, and co-ordination. If an organisation's information systems are disrupted or destroyed, then damage to the whole inevitably follows. This paper uses a proven systemic, analytic framework the Viable System Model (VSM - in a functionalist mode, to analyse the vulnerabilities of an organisation's information resources to this form of aggression. It examines the tactics available, and where they can be used to effectively attack an organisation.

  12. Prototyping smart assistance with Bayesian autonomous driver models

    OpenAIRE

    Möbus, Claus; Eilers, Mark

    2011-01-01

    The Human or Cognitive Centered Design (HCD) of intelligent transport systems requires digital Models of Human Behavior and Cognition (MHBC) enabling Ambient Intelligence e.g. in a smart car. Currently MBHC are developed and used as driver models in traffic scenario simulations, in proving safety assertions and in supporting risk-based design. Furthermore, it is tempting to prototype assistance systems (AS) on the basis of a human driver model cloning an expert driver. To that end we propose ...

  13. CONCEIVING AND GENERATING A VIABLE COMPLEXITY MODEL FOR PERSONAL AND/OR ENTREPRENEURIAL CHANGE AND DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    George Niculescu

    2012-03-01

    Full Text Available This article proposes on the one hand to do research and study – with a genuine approach, inspiredand deep-rooted in the method of the sociological school in Bucharest and creatively renewed and integrating thenewest acquisitions of complexity science – the representative intricate entity “man as an economic actor (resourceand potential within the industrial organization and corporation in mono-industrial area (region in the period inwhich the phenomenon of transition from an industrial society to knowledge society takes place; and on the otherhand our project proposes to conceive a viable model of change and career of the human resources in the ElectricPlant of Rovinari as well as to conceive and accomplish a pilot-model of a platform in order to support the efficientimplement through a research-action approach of the model of personal and/or entrepreneurship change and careerof the human resources in the Electric Plant of Rovinari.

  14. Modeling and prototyping of a flux concentrator for positron capture.

    Energy Technology Data Exchange (ETDEWEB)

    Liu, W.; Gai, W.; Wang, H.; Wong, T.; High Energy Physics; IIT

    2008-10-01

    An adiabatic matching device (AMD) generates a tapered high-strength magnetic field to capture positrons emitted from a positron target to a downstream accelerating structure. The AMD is a key component of a positron source and represents a technical challenge. The International Linear Collider collaboration is proposing to employ a pulsed, normal-conducting, flux-concentrator to generate a 5 Tesla initial magnetic field. The flux-concentrator structure itself and the interactions between the flux-concentrator and the external power supply circuits give rise to a nontrivial system. In this paper, we present a recently developed equivalent circuit model for a flux concentrator, along with the characteristics of a prototype fabricated for validating the model. Using the model, we can obtain the transient response of the pulsed magnetic field and the field profile. Calculations based on the model and the results of measurements made on the prototype are in good agreement.

  15. Mathematical modelling of the viable epidermis: impact of cell shape and vertical arrangement

    KAUST Repository

    Wittum, Rebecca

    2017-12-07

    In-silico methods are valuable tools for understanding the barrier function of the skin. The key benefit is that mathematical modelling allows the interplay between cell shape and function to be elucidated. This study focuses on the viable (living) epidermis. For this region, previous works suggested a diffusion model and an approximation of the cells by hexagonal prisms. The work at hand extends this in three ways. First, the extracellular space is treated with full spatial resolution. This induces a decrease of permeability by about 10%. Second, cells of tetrakaidecahedral shape are considered, in addition to the original hexagonal prisms. For both cell types, the resulting membrane permeabilities are compared. Third, for the first time, the influence of cell stacking in the vertical direction is considered. This is particularly important for the stratum granulosum, where tight junctions are present.

  16. Validation of thermal models for a prototypical MEMS thermal actuator.

    Energy Technology Data Exchange (ETDEWEB)

    Gallis, Michail A.; Torczynski, John Robert; Piekos, Edward Stanley; Serrano, Justin Raymond; Gorby, Allen D.; Phinney, Leslie Mary

    2008-09-01

    This report documents technical work performed to complete the ASC Level 2 Milestone 2841: validation of thermal models for a prototypical MEMS thermal actuator. This effort requires completion of the following task: the comparison between calculated and measured temperature profiles of a heated stationary microbeam in air. Such heated microbeams are prototypical structures in virtually all electrically driven microscale thermal actuators. This task is divided into four major subtasks. (1) Perform validation experiments on prototypical heated stationary microbeams in which material properties such as thermal conductivity and electrical resistivity are measured if not known and temperature profiles along the beams are measured as a function of electrical power and gas pressure. (2) Develop a noncontinuum gas-phase heat-transfer model for typical MEMS situations including effects such as temperature discontinuities at gas-solid interfaces across which heat is flowing, and incorporate this model into the ASC FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (3) Develop a noncontinuum solid-phase heat transfer model for typical MEMS situations including an effective thermal conductivity that depends on device geometry and grain size, and incorporate this model into the FEM heat-conduction code Calore to enable it to simulate these effects with good accuracy. (4) Perform combined gas-solid heat-transfer simulations using Calore with these models for the experimentally investigated devices, and compare simulation and experimental temperature profiles to assess model accuracy. These subtasks have been completed successfully, thereby completing the milestone task. Model and experimental temperature profiles are found to be in reasonable agreement for all cases examined. Modest systematic differences appear to be related to uncertainties in the geometric dimensions of the test structures and in the thermal conductivity of the

  17. Femur Model Reconstruction Based on Reverse Engineering and Rapid Prototyping

    Science.gov (United States)

    Tang, Tongming; Zhang, Zheng; Ni, Hongjun; Deng, Jiawen; Huang, Mingyu

    Precise reconstruction of 3D models is fundamental and crucial to the researches of human femur. In this paper we present our approach towards tackling this problem. The surface of a human femur was scanned using a hand-held 3D laser scanner. The data obtained, in the form of point cloud, was then processed using the reverse engineering software Geomagic and the CAD/CAM software CimatronE to reconstruct a digital 3D model. The digital model was then used by the rapid prototyping machine to build a physical model of human femur using 3D printing. The geometric characteristics of the obtained physical model matched that of the original femur. The process of "physical object - 3D data - digital 3D model - physical model" presented in this paper provides a foundation of precise modeling for the digital manufacturing, virtual assembly, stress analysis, and simulated surgery of artificial bionic femurs.

  18. Wine Traceability: A Data Model and Prototype in Albanian Context.

    Science.gov (United States)

    Vukatana, Kreshnik; Sevrani, Kozeta; Hoxha, Elira

    2016-02-17

    Vine traceability is a critical issue that has gained interest internationally. Quality control programs and schemes are mandatory in many countries including EU members and the USA. Albania has transformed most of the EU regulations on food into laws. Regarding the vine sector, the obligation of wine producers to keep traceability data is part of the legislation. The analysis on the interviews conducted with Albanian winemakers show that these data are actually recorded only in hard copy. Another fact that emerges from the interviews is that only two producers have implemented the ISO (International Organization for Standardization) standards on food. The purpose of this paper is to develop an agile and automated traceability system based on these standards. We propose a data model and system prototype that are described in the second and third section of this work. The data model is an adaption along the lines of the GS1 (Global Standards One) specifications for a wine supply chain. The proposed prototype has a key component that is mobile access to the information about wine through barcode technology. By using this mechanism the consumer obtains transparency on his expectations concerning the quality criteria. Another important component of the proposed system in this paper is a real-time notification module that works as an alert system when a risk is identified. This can help producers and authorities to have a rapid identification of a contaminated product. It is important in cases when recalling the product from the market or preventing it from reaching the consumer.

  19. Beer's viable system model and Luhmann's communication theory: ‘organizations’ from the perspective of meta-games

    NARCIS (Netherlands)

    Johnson, M.W.; Leydesdorff, L.

    2015-01-01

    Beyond the descriptions of ‘viability’ provided by Beer's Viable System Model, Maturana's autopoietic theory or Luhmann's communication theory, questions remain as to what ‘viability’ means across different contexts. How is ‘viability’ affected by the Internet and the changing information

  20. Preliminary stochastic model for managing Vibrio parahaemolyticus and total viable bacterial counts in a Pacific oyster (Crassostrea gigas) supply chain.

    Science.gov (United States)

    Fernandez-Piquer, Judith; Bowman, John P; Ross, Tom; Estrada-Flores, Silvia; Tamplin, Mark L

    2013-07-01

    Vibrio parahaemolyticus can accumulate and grow in oysters stored without refrigeration, representing a potential food safety risk. High temperatures during oyster storage can lead to an increase in total viable bacteria counts, decreasing product shelf life. Therefore, a predictive tool that allows the estimation of both V. parahaemolyticus populations and total viable bacteria counts in parallel is needed. A stochastic model was developed to quantitatively assess the populations of V. parahaemolyticus and total viable bacteria in Pacific oysters for six different supply chain scenarios. The stochastic model encompassed operations from oyster farms through consumers and was built using risk analysis software. Probabilistic distributions and predictions for the percentage of Pacific oysters containing V. parahaemolyticus and high levels of viable bacteria at the point of consumption were generated for each simulated scenario. This tool can provide valuable information about V. parahaemolyticus exposure and potential control measures and can help oyster companies and regulatory agencies evaluate the impact of product quality and safety during cold chain management. If coupled with suitable monitoring systems, such models could enable preemptive action to be taken to counteract unfavorable supply chain conditions.

  1. Multiscale modelling methodology for virtual prototyping of effervescent tablets.

    Science.gov (United States)

    Stepanek, Frantisek; Loo, Adeline; Lim, Tiong Shing

    2006-07-01

    Computational methodology for virtual tablet prototyping has been developed. The methodology consists of two steps: construction of virtual particle compacts of varying composition using the discrete element method (DEM), and the simulation of their dissolution by eroding individual components from the tablet microstructure according to their intrinsic dissolution rates, using the volume-of-fluid (VOF) method. The effective erosion rate obtained from simulations at the particle assembly length-scale is used for the calculation of dissolution time at the tablet length-scale. The methodology is demonstrated on the case of a simple effervescent formulation consisting of sodium bicarbonate-acetic acid effervescent system, sodium chloride as a model active substance, and lactose filler. The experimentally measured dependence of tablet dissolution time on composition and compaction force was found to be in very good agreement with outputs from computer simulations.

  2. Prototype of Automated PLC Model Checking Using Continuous Integration Tools

    CERN Document Server

    Lettrich, Michael

    2015-01-01

    To deal with the complexity of operating and supervising large scale industrial installations at CERN, often Programmable Logic Controllers (PLCs) are used. A failure in these control systems can cause a disaster in terms of economic loses, environmental damages or human losses. Therefore the requirements to software quality are very high. To provide PLC developers with a way to verify proper functionality against requirements, a Java tool named PLCverif has been developed which encapsulates and thus simplifies the use of third party model checkers. One of our goals in this project is to integrate PLCverif in development process of PLC programs. When the developer changes the program, all the requirements should be verified again, as a change on the code can produce collateral effects and violate one or more requirements. For that reason, PLCverif has been extended to work with Jenkins CI in order to trigger automatically the verication cases when the developer changes the PLC program. This prototype has been...

  3. Wine Traceability: A Data Model and Prototype in Albanian Context

    Directory of Open Access Journals (Sweden)

    Kreshnik Vukatana

    2016-02-01

    Full Text Available Vine traceability is a critical issue that has gained interest internationally. Quality control programs and schemes are mandatory in many countries including EU members and the USA. Albania has transformed most of the EU regulations on food into laws. Regarding the vine sector, the obligation of wine producers to keep traceability data is part of the legislation. The analysis on the interviews conducted with Albanian winemakers show that these data are actually recorded only in hard copy. Another fact that emerges from the interviews is that only two producers have implemented the ISO (International Organization for Standardization standards on food. The purpose of this paper is to develop an agile and automated traceability system based on these standards. We propose a data model and system prototype that are described in the second and third section of this work. The data model is an adaption along the lines of the GS1 (Global Standards One specifications for a wine supply chain. The proposed prototype has a key component that is mobile access to the information about wine through barcode technology. By using this mechanism the consumer obtains transparency on his expectations concerning the quality criteria. Another important component of the proposed system in this paper is a real-time notification module that works as an alert system when a risk is identified. This can help producers and authorities to have a rapid identification of a contaminated product. It is important in cases when recalling the product from the market or preventing it from reaching the consumer.

  4. Wine Traceability: A Data Model and Prototype in Albanian Context

    Science.gov (United States)

    Vukatana, Kreshnik; Sevrani, Kozeta; Hoxha, Elira

    2016-01-01

    Vine traceability is a critical issue that has gained interest internationally. Quality control programs and schemes are mandatory in many countries including EU members and the USA. Albania has transformed most of the EU regulations on food into laws. Regarding the vine sector, the obligation of wine producers to keep traceability data is part of the legislation. The analysis on the interviews conducted with Albanian winemakers show that these data are actually recorded only in hard copy. Another fact that emerges from the interviews is that only two producers have implemented the ISO (International Organization for Standardization) standards on food. The purpose of this paper is to develop an agile and automated traceability system based on these standards. We propose a data model and system prototype that are described in the second and third section of this work. The data model is an adaption along the lines of the GS1 (Global Standards One) specifications for a wine supply chain. The proposed prototype has a key component that is mobile access to the information about wine through barcode technology. By using this mechanism the consumer obtains transparency on his expectations concerning the quality criteria. Another important component of the proposed system in this paper is a real-time notification module that works as an alert system when a risk is identified. This can help producers and authorities to have a rapid identification of a contaminated product. It is important in cases when recalling the product from the market or preventing it from reaching the consumer. PMID:28231105

  5. Procedural Modeling for Rapid-Prototyping of Multiple Building Phases

    Science.gov (United States)

    Saldana, M.; Johanson, C.

    2013-02-01

    RomeLab is a multidisciplinary working group at UCLA that uses the city of Rome as a laboratory for the exploration of research approaches and dissemination practices centered on the intersection of space and time in antiquity. In this paper we present a multiplatform workflow for the rapid-prototyping of historical cityscapes through the use of geographic information systems, procedural modeling, and interactive game development. Our workflow begins by aggregating archaeological data in a GIS database. Next, 3D building models are generated from the ArcMap shapefiles in Esri CityEngine using procedural modeling techniques. A GIS-based terrain model is also adjusted in CityEngine to fit the building elevations. Finally, the terrain and city models are combined in Unity, a game engine which we used to produce web-based interactive environments which are linked to the GIS data using keyhole markup language (KML). The goal of our workflow is to demonstrate that knowledge generated within a first-person virtual world experience can inform the evaluation of data derived from textual and archaeological sources, and vice versa.

  6. Bianchi I model as a prototype for a cyclical Universe

    Science.gov (United States)

    Montani, Giovanni; Marchi, Andrea; Moriconi, Riccardo

    2018-02-01

    We analyze the dynamics of the Bianchi I model in the presence of stiff matter, an ultrarelativistic component and a small negative cosmological constant. We quantize this model in the framework of the polymer quantum mechanics, in order to introduce cut-off features in the minisuperspace dynamics. We then apply to the polymer Wheeler-DeWitt equation, emerging from the Dirac constraint, an adiabatic approximation a la Vilenkin, which treats the Universe volume as a quasi-classical variable, becoming de facto the dynamical clock for the pure quantum degrees of freedom, here identified in the Universe anisotropies. The main issue of the present analysis consists of determining a cyclical evolution for the Bianchi I model, oscillating between the Big-Bounce induced by the cut-off physics and the turning point due to the small cosmological constant. Furthermore, the mean value of the Universe anisotropy variables remains finite during the whole evolution, including the phase across the Big-Bounce. Such a feature, according to a suitable choice of the initial conditions makes the present cosmological paradigm, a viable scenario for the description of a possible primordial and late phases of the actual Universe.

  7. Managing Viable Knowledge

    NARCIS (Netherlands)

    Achterbergh, J.M.I.M.; Vriens, D.J.

    2002-01-01

    In this paper, Beer's Viable System Model (VSM) is applied to knowledge management. Based on the VSM, domains of knowledge are identified that an organization should possess to maintain its viability. The logic of the VSM is also used to support the diagnosis, design and implementation of the

  8. Teacher training in South Africa: The integrated model as viable option

    African Journals Online (AJOL)

    This article contributes to the debate regarding the preferred model for teacher education to provide for teacher shortages. The models commonly referred to are the consecutive model, the integrated model and the concurrent model for teacher training. The aim of this article is to determine if the integrated model for teacher ...

  9. Proliferation Risk Characterization Model Prototype Model - User and Programmer Guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Dukelow, J.S.; Whitford, D.

    1998-12-01

    A model for the estimation of the risk of diversion of weapons-capable materials was developed. It represents both the threat of diversion and site vulnerability as a product of a small number of variables (two to eight), each of which can take on a small number (two to four) of qualitatively defined (but quantitatively implemented) values. The values of the overall threat and vulnerability variables are then converted to threat and vulnerability categories. The threat and vulnerability categories are used to define the likelihood of diversion, also defined categorically. The evaluator supplies an estimate of the consequences of a diversion, defined categorically, but with the categories based on the IAEA Attractiveness levels. Likelihood and Consequences categories are used to define the Risk, also defined categorically. The threat, vulnerability, and consequences input provided by the evaluator contains a representation of his/her uncertainty in each variable assignment which is propagated all the way through to the calculation of the Risk categories. [Appendix G available on diskette only.

  10. Intimacy expectations in same-sex friendships: a prototype interaction-pattern model.

    Science.gov (United States)

    Fehr, Beverley

    2004-02-01

    A prototype interaction-pattern model of intimacy expectations was proposed. The central tenet of this model was that people develop knowledge of the patterns of relating that are likely to produce intimacy in a same-sex friendship. Further, it was posited that these interaction patterns are structured as prototypes, such that some patterns of relating are regarded as more likely to create a sense of intimacy than others. Support for this model was found in 6 studies. Interaction patterns depicting self-disclosure, emotional support, and the like were considered more prototypical of intimacy expectations than patterns depicting shared activities and practical support. Regarding gender, women rated intimacy interaction patterns higher than did men, particularly prototypical patterns. However, women and men agreed that prototypical interaction patterns were more indicative of intimacy in a friendship than nonprototypical patterns. Implications for the controversy over whether women's friendships are more intimate than men's are discussed.

  11. Experimental human-like model to assess the part of viable Legionella reaching the thoracic region after nebulization.

    Directory of Open Access Journals (Sweden)

    Jérémie Pourchez

    Full Text Available The incidence of Legionnaires' disease (LD in European countries and the USA has been constantly increasing since 1998. Infection of humans occurs through aerosol inhalation. To bridge the existing gap between the concentration of Legionella in a water network and the deposition of bacteria within the thoracic region (assessment of the number of viable Legionella, we validated a model mimicking realistic exposure through the use of (i recent technology for aerosol generation and (ii a 3D replicate of the human upper respiratory tract. The model's sensitivity was determined by monitoring the deposition of (i aerosolized water and Tc99m radio-aerosol as controls, and (ii bioaerosols generated from both Escherichia coli and Legionella pneumophila sg 1 suspensions. The numbers of viable Legionella prior to and after nebulization were provided by culture, flow cytometry and qPCR. This study was designed to obtain more realistic data on aerosol inhalation (vs. animal experimentation and deposition at the thoracic region in the context of LD. Upon nebulization, 40% and 48% of the initial Legionella inoculum was made of cultivable and non-cultivable cells, respectively; 0.7% of both populations reached the filter holder mimicking the thoracic region in this setup. These results are in agreement with experimental data based on quantitative microbial risk assessment methods and bring new methods that may be useful for preventing LD.

  12. Rapid Prototyping — A Tool for Presenting 3-Dimensional Digital Models Produced by Terrestrial Laser Scanning

    Directory of Open Access Journals (Sweden)

    Juho-Pekka Virtanen

    2014-07-01

    Full Text Available Rapid prototyping has received considerable interest with the introduction of affordable rapid prototyping machines. These machines can be used to manufacture physical models from three-dimensional digital mesh models. In this paper, we compare the results obtained with a new, affordable, rapid prototyping machine, and a traditional professional machine. Two separate data sets are used for this, both of which were acquired using terrestrial laser scanning. Both of the machines were able to produce complex and highly detailed geometries in plastic material from models based on terrestrial laser scanning. The dimensional accuracies and detail levels of the machines were comparable, and the physical artifacts caused by the fused deposition modeling (FDM technique used in the rapid prototyping machines could be found in both models. The accuracy of terrestrial laser scanning exceeded the requirements for manufacturing physical models of large statues and building segments at a 1:40 scale.

  13. Polarization modes of gravitational wave for viable f(R) models

    Science.gov (United States)

    Sharif, M.; Siddiqa, Aisha

    2017-12-01

    In this paper, we study the gravitational wave polarization modes for some particular f(R) models using Newman-Penrose formalism. We find two extra scalar modes of gravitational wave (longitudinal and transversal modes) in addition to two tensor modes of general relativity. We conclude that gravitational waves correspond to class II6 under the Lorentz-invariant E(2) classification of plane null waves for these f(R) models.

  14. MODELING, DYNAMIC AND THERMAL ANALYSIS OF THE PROTOTYPE MAGNETORHEOLOGICAL CLUTCH

    OpenAIRE

    Jerzy BAJKOWSKI

    2014-01-01

    This paper presents the complex results concerning the prototype clutch with magnetorheological (MR) fluid. The obtained characteristics depicts the dependencies between the clutch’s torque and: the intensity of the magnetic field induced by the coil current, as well as the rotational speed of the rotor, and the temperature of the fluid during exploitation. The research was conducted on the dedicated laboratory stand. The detailed analysis of the results is provided in the article.

  15. MODELING, DYNAMIC AND THERMAL ANALYSIS OF THE PROTOTYPE MAGNETORHEOLOGICAL CLUTCH

    Directory of Open Access Journals (Sweden)

    Jerzy BAJKOWSKI

    2014-06-01

    Full Text Available This paper presents the complex results concerning the prototype clutch with magnetorheological (MR fluid. The obtained characteristics depicts the dependencies between the clutch’s torque and: the intensity of the magnetic field induced by the coil current, as well as the rotational speed of the rotor, and the temperature of the fluid during exploitation. The research was conducted on the dedicated laboratory stand. The detailed analysis of the results is provided in the article.

  16. Role model and prototype matching: Upper-secondary school students’ meetings with tertiary STEM students

    DEFF Research Database (Denmark)

    Lykkegaard, Eva; Ulriksen, Lars

    2016-01-01

    Previous research has found that young people’s prototypes of science students and scientists affect their inclination to choose tertiary STEM programs. Consequently, many recruitment initiatives include role models to challenge these prototypes. The present study followed 15 STEM-oriented upper......-secondary school students from university-distant backgrounds during and after their participation in an 18-months long university-based recruitment and outreach project involving tertiary STEM students as role models. The analysis focusses on how the students’ meetings with the role models affected their thoughts...... concerning STEM students and attending university. The regular self-to-prototype matching process was shown in real-life role-models meetings to be extended to a more complex three-way matching process between students’ self-perceptions, prototype images and situation-specific conceptions of role models...

  17. Tribimaximal mixing in a viable family symmetry unified model with an extended seesaw mechanism

    NARCIS (Netherlands)

    Bazzocchi, F.; Varzielas, I.D.

    2009-01-01

    We present a grand unified model based on SO(10) with a Δ(27) family symmetry. Fermion masses and mixings are fitted and agree well with experimental values. An extended seesaw mechanism plays a key role in the generation of the leptonic mixing, which is approximately tribimaximal. © 2009 The

  18. A Prototypicality Validation of the Comprehensive Assessment of Psychopathic Personality (CAPP) Model Spanish Version.

    Science.gov (United States)

    Flórez, Gerardo; Casas, Alfonso; Kreis, Mette K F; Forti, Leonello; Martínez, Joaquín; Fernández, Juan; Conde, Manuel; Vázquez-Noguerol, Raúl; Blanco, Tania; Hoff, Helge A; Cooke, David J

    2015-10-01

    The Comprehensive Assessment of Psychopathic Personality (CAPP) is a newly developed, lexically based, conceptual model of psychopathy. The content validity of the Spanish language CAPP model was evaluated using prototypicality analysis. Prototypicality ratings were collected from 187 mental health experts and from samples of 143 health professionals and 282 community residents. Across the samples the majority of CAPP items were rated as highly prototypical of psychopathy. The Self, Dominance, and Attachment domains were evaluated as being more prototypical than the Behavioral and Cognitive domains. These findings are consistent with findings from similar studies in other languages and provide further support for the content validation of the CAPP model across languages and the lexical approach.

  19. Concierge Medicine: A Viable Business Model for (Some) Physicians of the Future?

    Science.gov (United States)

    Paul, David P; Skiba, Michaeline

    Concierge medicine is a medical management structure that has been in existence since the 1990s. Essentially, a typical concierge medical practice limits its number of patients and provides highly personalized attention that includes comprehensive annual physicals, same-day appointments, preventive and wellness care, and fast, 24/7 response time. Concierge medicine has become popular among both physicians and patients/consumers who are frustrated by the limitations imposed by managed care organizations. From many physicians' perspectives, concierge medicine offers greater autonomy, the opportunity to return to a more manageable patient load, and the chance to improve their incomes that have declined because of increasingly lowered reimbursements for their services. From many patients'/consumers' perspectives, concierge medicine provides more immediate, convenient, and caring access to their primary care physicians and, regardless of their physician's annual retainer fee, the elimination of third-party insurance coverage costs and hassles. The major criticisms of the concierge medicine model come from some health care policy makers and experts, who believe that concierge medicine is elitist and its widespread implementation will increase the shortage of primary care physicians, which is already projected to become worse because of the Affordable Care Act's individual mandate, which requires everyone to have health insurance.Utilizing these topics as its framework, this article explains why concierge medicine's form of medical management is gaining ground, cites its advantages and disadvantages for stakeholders, and examines some of the issues that will affect its growth.

  20. Cosmological implications of a viable non-analytical f(R) model

    Science.gov (United States)

    Capozziello, S.; Carlevaro, N.; De Laurentis, M.; Lattanzi, M.; Montani, G.

    2013-12-01

    Power-law corrections (having the exponent strictly between 2 and 3) to the Einstein-Hilbert action yield an extended theory of gravity which is consistent with Solar-System tests and properly reproduces the main phases of the Universe thermal history. We find two distinct constraints for the characteristic length scale of the model: a lower bound from the Solar-System test and an upper bound by requiring the existence of the matter-dominated era. We also show how the extended framework can accommodate the existence of an early de Sitter phase. Within the allowed range of characteristic length scales, the relation between the expansion rate and the energy scale of inflation is modified, yielding a value of the rate several orders of magnitude smaller than in the standard picture. The observational implication of this fact is that a tiny value of the tensor-to-scalar ratio is expected in the extended framework. The suppression of primordial tensor modes also implies that the inflationary scale can be made arbitrarily close to the Planck one according to the current limits. Finally, an analysis of the propagation of gravitational waves on a Robertson-Walker background is addressed.

  1. Progression of Behavioral and CNS Deficits in a Viable Murine Model of Chronic Neuronopathic Gaucher Disease.

    Science.gov (United States)

    Dai, Mei; Liou, Benjamin; Swope, Brittany; Wang, Xiaohong; Zhang, Wujuan; Inskeep, Venette; Grabowski, Gregory A; Sun, Ying; Pan, Dao

    2016-01-01

    To study the neuronal deficits in neuronopathic Gaucher Disease (nGD), the chronological behavioral profiles and the age of onset of brain abnormalities were characterized in a chronic nGD mouse model (9V/null). Progressive accumulation of glucosylceramide (GC) and glucosylsphingosine (GS) in the brain of 9V/null mice were observed at as early as 6 and 3 months of age for GC and GS, respectively. Abnormal accumulation of α-synuclein was present in the 9V/null brain as detected by immunofluorescence and Western blot analysis. In a repeated open-field test, the 9V/null mice (9 months and older) displayed significantly less environmental habituation and spent more time exploring the open-field than age-matched WT group, indicating the onset of short-term spatial memory deficits. In the marble burying test, the 9V/null group had a shorter latency to initiate burying activity at 3 months of age, whereas the latency increased significantly at ≥12 months of age; 9V/null females buried significantly more marbles to completion than the WT group, suggesting an abnormal response to the instinctive behavior and an abnormal activity in non-associative anxiety-like behavior. In the conditional fear test, only the 9V/null males exhibited a significant decrease in response to contextual fear, but both genders showed less response to auditory-cued fear compared to age- and gender-matched WT at 12 months of age. These results indicate hippocampus-related emotional memory defects. Abnormal gait emerged in 9V/null mice with wider front-paw and hind-paw widths, as well as longer stride in a gender-dependent manner with different ages of onset. Significantly higher liver- and spleen-to-body weight ratios were detected in 9V/null mice with different ages of onsets. These data provide temporal evaluation of neurobehavioral dysfunctions and brain pathology in 9V/null mice that can be used for experimental designs to evaluate novel therapies for nGD.

  2. Progression of Behavioral and CNS Deficits in a Viable Murine Model of Chronic Neuronopathic Gaucher Disease.

    Directory of Open Access Journals (Sweden)

    Mei Dai

    Full Text Available To study the neuronal deficits in neuronopathic Gaucher Disease (nGD, the chronological behavioral profiles and the age of onset of brain abnormalities were characterized in a chronic nGD mouse model (9V/null. Progressive accumulation of glucosylceramide (GC and glucosylsphingosine (GS in the brain of 9V/null mice were observed at as early as 6 and 3 months of age for GC and GS, respectively. Abnormal accumulation of α-synuclein was present in the 9V/null brain as detected by immunofluorescence and Western blot analysis. In a repeated open-field test, the 9V/null mice (9 months and older displayed significantly less environmental habituation and spent more time exploring the open-field than age-matched WT group, indicating the onset of short-term spatial memory deficits. In the marble burying test, the 9V/null group had a shorter latency to initiate burying activity at 3 months of age, whereas the latency increased significantly at ≥12 months of age; 9V/null females buried significantly more marbles to completion than the WT group, suggesting an abnormal response to the instinctive behavior and an abnormal activity in non-associative anxiety-like behavior. In the conditional fear test, only the 9V/null males exhibited a significant decrease in response to contextual fear, but both genders showed less response to auditory-cued fear compared to age- and gender-matched WT at 12 months of age. These results indicate hippocampus-related emotional memory defects. Abnormal gait emerged in 9V/null mice with wider front-paw and hind-paw widths, as well as longer stride in a gender-dependent manner with different ages of onset. Significantly higher liver- and spleen-to-body weight ratios were detected in 9V/null mice with different ages of onsets. These data provide temporal evaluation of neurobehavioral dysfunctions and brain pathology in 9V/null mice that can be used for experimental designs to evaluate novel therapies for nGD.

  3. Holistic approach to production systems from the perspective of lean manufacturing and viable systems model; Aproximacion holistica a los sistemas de produccion desde la perspectiva Lean Manufacturing y Modelos de Sistemas Viables

    Energy Technology Data Exchange (ETDEWEB)

    Puche Regaliza, J. C.; Costas Gual, J.

    2012-07-01

    The reductionism approach usually adopted by many organizations provokes too often a problem of sustain ability in the market over time in these organizations. To increase this sustain ability, we propose a structural and a behavioral change, in a way that the reductionism is replaced by an holistic approach appropriate to address the dynamic complexity inherent in any organization. With regard to structural change, we propose the use of Organizational Cybernetics and particularly the Viable System Model. With respect to behavior change, we propose the use of Lean Manufacturing paradigm. (Author)

  4. Macromolecular query language (MMQL): prototype data model and implementation.

    Science.gov (United States)

    Shindyalov, I N; Chang, W; Pu, C; Bourne, P E

    1994-11-01

    Macromolecular query language (MMQL) is an extensible interpretive language in which to pose questions concerning the experimental or derived features of the 3-D structure of biological macromolecules. MMQL portends to be intuitive with a simple syntax, so that from a user's perspective complex queries are easily written. A number of basic queries and a more complex query--determination of structures containing a five-strand Greek key motif--are presented to illustrate the strengths and weaknesses of the language. The predominant features of MMQL are a filter and pattern grammar which are combined to express a wide range of interesting biological queries. Filters permit the selection of object attributes, for example, compound name and resolution, whereas the patterns currently implemented query primary sequence, close contacts, hydrogen bonding, secondary structure, conformation and amino acid properties (volume, polarity, isoelectric point, hydrophobicity and different forms of exposure). MMQL queries are processed by MMQLlib; a C++ class library, to which new query methods and pattern types are easily added. The prototype implementation described uses PDBlib, another C(++)-based class library from representing the features of biological macromolecules at the level of detail parsable from a PDB file. Since PDBlib can represent data stored in relational and object-oriented databases, as well as PDB files, once these data are loaded they too can be queried by MMQL. Performance metrics are given for queries of PDB files for which all derived data are calculated at run time and compared to a preliminary version of OOPDB, a prototype object-oriented database with a schema based on a persistent version of PDBlib which offers more efficient data access and the potential to maintain derived information. MMQLlib, PDBlib and associated software are available via anonymous ftp from cuhhca.hhmi.columbia.edu.

  5. Interactive Effects within the Prototype Willingness Model: Predicting the Drinking Behavior of Indigenous Early Adolescents

    OpenAIRE

    Armenta, Brian E.; Whitbeck, Les B.; Gentzler, Kari C.

    2016-01-01

    Drawing on the Prototype/Willingness Model of Adolescent Risk Behavior we used longitudinal data collected from North American Indigenous early adolescents (ages 10–12 years) to examine the interactive effects of favorable drinker prototypes, perceived drinking norms, and past year drinking behavior on subsequent drinking behavior (i.e., drinking behavior 1 year later and growth in drinking behavior from 1–5 years later). We found that the positive association between favorable drinker protot...

  6. The influence of prototype testing in three-dimensional aortic models on fenestrated endograft design.

    Science.gov (United States)

    Taher, Fadi; Falkensammer, Juergen; McCarte, Jamie; Strassegger, Johann; Uhlmann, Miriam; Schuch, Philipp; Assadian, Afshin

    2017-06-01

    The fenestrated Anaconda endograft (Vascutek/Terumo, Inchinnan, UK) is intended for the treatment of abdominal aortic aneurysms with an insufficient infrarenal landing zone. The endografts are custom-made with use of high-resolution, 1-mm-slice computed tomography angiography images. For every case, a nonsterile prototype and a three-dimensional (3D) model of the patient's aorta are constructed to allow the engineers as well as the physician to test-implant the device and to review the fit of the graft. The aim of this investigation was to assess the impact of 3D model construction and prototype testing on the design of the final sterile endograft. A prospectively held database on fenestrated endovascular aortic repair patients treated at a single institution was completed with data from the Vascutek engineers' prototype test results as well as the product request forms. Changes to endograft design based on prototype testing were assessed and are reported for all procedures. Between April 1, 2013, and August 18, 2015, 60 fenestrated Anaconda devices were implanted. Through prototype testing, engineers were able to identify and report potential risks to technical success related to use of the custom device for the respective patient. Theoretical concerns about endograft fit in the rigid model were expressed in 51 cases (85.0%), and the engineers suggested potential changes to the design of 21 grafts (35.0%). Thirteen cases (21.7%) were eventually modified after the surgeon's testing of the prototype. A second prototype was ordered in three cases (5.0%) because of extensive changes to endograft design, such as inclusion of an additional fenestration. Technical success rates were comparable for grafts that showed a perfect fit from the beginning and cases in which prototype testing resulted in a modification of graft design. Planning and construction of fenestrated endografts for complex aortic anatomies where exact fit and positioning of the graft are paramount to

  7. Role model and prototype matching: Upper-secondary school students’ meetings with tertiary STEM students

    Directory of Open Access Journals (Sweden)

    Eva Lykkegaard

    2016-04-01

    Full Text Available Previous research has found that young people’s prototypes of science students and scientists affect their inclination to choose tertiary STEM programs (Science, Technology, Engineering and Mathematics. Consequently, many recruitment initiatives include role models to challenge these prototypes. The present study followed 15 STEM-oriented upper-secondary school students from university-distant backgrounds during and after their participation in an 18-months long university-based recruitment and outreach project involving tertiary STEM students as role models. The analysis focusses on how the students’ meetings with the role models affected their thoughts concerning STEM students and attending university. The regular self-to-prototype matching process was shown in real-life role-models meetings to be extended to a more complex three-way matching process between students’ self-perceptions, prototype images and situation-specific conceptions of role models. Furthermore, the study underlined the positive effect of prolonged role-model contact, the importance of using several role models and that traditional school subjects catered more resistant prototype images than unfamiliar ones did.

  8. Rodent model for long-term maintenance and development of the viable cysticerci of Taenia saginata asiatica

    Science.gov (United States)

    Wang, I.C.; Chung, W.C.; Lu, S.C.

    2000-01-01

    Although oncospheres of Taenia saginata asiatica can develop into cysticerci in immunodeficiency, immunosuppressed, and normal mice, no detailed information on the development features of these cysticerci from SCID mice is available. In the present study, the tumor-like cyst was found in the subcutaneous tissues of each of 10 SCID mice after 38-244 days inoculation with 39,000 oncospheres of T. s. asiatica. These cysts weighed 2.0-9.6 gm and were 1.5-4.3 cm in diameter. The number of cysticerci were collected from these cysts ranged from 125 to 1,794 and the cysticercus recovery rate from 0.3% to 4.6%. All cysticerci were viable with a diameter of 1-6 mm and 9 abnormal ones each with 2 evaginated protoscoleces were also found. The mean length and width of scolex, protoscolex, and bladder were 477 × 558, 756 × 727, and 1,586 × 1,615 µm, respectively. The diameters of suckers and rostellum were 220 µm and 70 µm, respectively. All cysticerci had two rows of rostellar hooks. These findings suggest that the SCID mouse model can be employed as a tool for long-term maintenance of the biological materials for advanced studies of immunodiagnosis, vaccine development, and evaluation of cestocidal drugs which would be most benefit for the good health of the livestocks. PMID:11138316

  9. Bacteriophage treatment significantly reduces viable Clostridium difficile and prevents toxin production in an in vitro model system.

    Science.gov (United States)

    Meader, Emma; Mayer, Melinda J; Gasson, Michael J; Steverding, Dietmar; Carding, Simon R; Narbad, Arjan

    2010-12-01

    Clostridium difficile is primarily a nosocomial pathogen, causing thousands of cases of antibiotic-associated diarrhoea in the UK each year. In this study, we used a batch fermentation model of a C. difficile colonised system to evaluate the potential of a prophylactic and a remedial bacteriophage treatment regime to control the pathogen. It is shown that the prophylaxis regime was effective at preventing the growth of C. difficile (p = <0.001) and precluded the production of detectable levels of toxins A and B. The remedial treatment regime caused a less profound and somewhat transient decrease in the number of viable C. difficile cells (p = <0.0001), but still resulted in a lower level of toxin production relative to the control. The numbers of commensal bacteria including total aerobes and anaerobes, Bifidobacterium sp., Bacteroides sp., Lactobacillus sp., total Clostridium sp., and Enterobacteriaceae were not significantly decreased by this therapy, whereas significant detrimental effects were observed with metronidazole treatment. Our study indicates that phage therapy has potential to be used for the control of C. difficile; it highlights the main benefits of this approach, and some future challenges. Copyright © 2010 Elsevier Ltd. All rights reserved.

  10. A Prototypical Model for Estimating High Tech Navy Recruiting Markets

    Science.gov (United States)

    1991-12-01

    Probability, Logit, and Probit Models, New York, New York 1990, p. 73. 37 Gujarati , D., ibid, p. 500. 31 V. MODELS ESTIMATION A. MODEL I ESTIMATION OF...Company, New York, N.Y., 1990. Gujarati , Damodar N., Basic Econometrics, Second Edition, McGraw-Hill Book Company, New York, N.Y., 1988. Jehn, Christopher

  11. Design of the 3D cadastre model and development of the prototype in the Russian Federation

    NARCIS (Netherlands)

    Vandysheva, N.; Ivanov, A.; Pakhomov, S.; Spiering, B.; Stoter, J.E.; Zlatanova, S.; Van Oosterom, P.J.M.

    2011-01-01

    This paper presents the on-going project on 3D cadastre modelling in the Russian Federation. The aim of this project is to provide guidance in the development of a prototype and to create favourable legal and institutional conditions for the introduction of 3D cadastre modelling in the Russian

  12. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques

    NARCIS (Netherlands)

    Hazeveld, Aletta; Huddleston Slater, James J. R.; Ren, Yijin

    INTRODUCTION: Rapid prototyping is a fast-developing technique that might play a significant role in the eventual replacement of plaster dental models. The aim of this study was to investigate the accuracy and reproducibility of physical dental models reconstructed from digital data by several rapid

  13. Prototyping and farm system modelling - Partners on the road towards more sustainable farm systems?

    NARCIS (Netherlands)

    Sterk, B.; Ittersum, van M.K.; Leeuwis, C.; Wijnands, F.G.

    2007-01-01

    Farm system modelling and prototyping are two research methods proposed to enhance the process of developing sustainable farm systems. Farm system models provide means to formalize, expand and refine expert knowledge and to integrate this with scientific agro-ecological knowledge at the farm level.

  14. Application prototype of a model-based expert system to the maintenance of a MAN

    Science.gov (United States)

    Hopfmueller, Heinrich; Kehl, Walter; Schapeler, Gottfried

    1993-10-01

    This paper describes the work done and results achieved in implementing a fault management prototype for a Metropolitan Area Network (MAN) switching system, the GMAN (GMS Fault Management Prototype for a MAN). The GMAN is implemented using the Generic Maintenance System (GMS) which has been developed by the RACE project AIM (R1006). The GMS is a model based expert system toolset (`2nd generation XPS') comprising components for knowledge acquisition, knowledge representation, model based reasoning, human machine interface, and dialogue design. The GMS supports automatic fault management from receiving and treating fault events to guiding an operator through a repair procedure.

  15. Prototype Development of an ICT System to Support Construction Management Based on Virtual Models and RFID

    DEFF Research Database (Denmark)

    Sørensen, Kristian Birch; Christiansson, Per; Svidt, Kjeld

    2009-01-01

    early example) of an ICT system was carried out to identify and formalise user needs in relation to construction management based on virtual models and radio frequency identification (RFID). The prototype was developed to support working processes in real-time project progress management, quality...... assurance and inventory management. In this paper a number of user needs for future ICT systems are presented. The needs are captured during the prototype development process and include that future ICT systems must be more user-friendly, enable object-oriented quality assurance procedures, capture data......There is a need to develop new information and communication technology (ICT) systems with better support of the contractor's working practice in order to gain more advantages from the virtual models created during the design of buildings. For this reason, a Contextual Design of a prototype (an...

  16. GEM System: automatic prototyping of cell-wide metabolic pathway models from genomes

    Directory of Open Access Journals (Sweden)

    Nakayama Yoichi

    2006-03-01

    Full Text Available Abstract Background Successful realization of a "systems biology" approach to analyzing cells is a grand challenge for our understanding of life. However, current modeling approaches to cell simulation are labor-intensive, manual affairs, and therefore constitute a major bottleneck in the evolution of computational cell biology. Results We developed the Genome-based Modeling (GEM System for the purpose of automatically prototyping simulation models of cell-wide metabolic pathways from genome sequences and other public biological information. Models generated by the GEM System include an entire Escherichia coli metabolism model comprising 968 reactions of 1195 metabolites, achieving 100% coverage when compared with the KEGG database, 92.38% with the EcoCyc database, and 95.06% with iJR904 genome-scale model. Conclusion The GEM System prototypes qualitative models to reduce the labor-intensive tasks required for systems biology research. Models of over 90 bacterial genomes are available at our web site.

  17. Development of a Prototype Model-Form Uncertainty Knowledge Base

    Science.gov (United States)

    Green, Lawrence L.

    2016-01-01

    Uncertainties are generally classified as either aleatory or epistemic. Aleatory uncertainties are those attributed to random variation, either naturally or through manufacturing processes. Epistemic uncertainties are generally attributed to a lack of knowledge. One type of epistemic uncertainty is called model-form uncertainty. The term model-form means that among the choices to be made during a design process within an analysis, there are different forms of the analysis process, which each give different results for the same configuration at the same flight conditions. Examples of model-form uncertainties include the grid density, grid type, and solver type used within a computational fluid dynamics code, or the choice of the number and type of model elements within a structures analysis. The objectives of this work are to identify and quantify a representative set of model-form uncertainties and to make this information available to designers through an interactive knowledge base (KB). The KB can then be used during probabilistic design sessions, so as to enable the possible reduction of uncertainties in the design process through resource investment. An extensive literature search has been conducted to identify and quantify typical model-form uncertainties present within aerospace design. An initial attempt has been made to assemble the results of this literature search into a searchable KB, usable in real time during probabilistic design sessions. A concept of operations and the basic structure of a model-form uncertainty KB are described. Key operations within the KB are illustrated. Current limitations in the KB, and possible workarounds are explained.

  18. Development of Prototype Driver Models for Highway Design: Research Update

    Science.gov (United States)

    1999-06-01

    One of the high-priority research areas of the Federal Highway Administration (FHWA) is the development of the Interactive Highway Safety Design Model (IHSDM). The goal of the IHSDM research program is to develop a systematic approach that will allow...

  19. A review method for UML requirements analysis model employing system-side prototyping.

    Science.gov (United States)

    Ogata, Shinpei; Matsuura, Saeko

    2013-12-01

    User interface prototyping is an effective method for users to validate the requirements defined by analysts at an early stage of a software development. However, a user interface prototype system offers weak support for the analysts to verify the consistency of the specifications about internal aspects of a system such as business logic. As the result, the inconsistency causes a lot of rework costs because the inconsistency often makes the developers impossible to actualize the system based on the specifications. For verifying such consistency, functional prototyping is an effective method for the analysts, but it needs a lot of costs and more detailed specifications. In this paper, we propose a review method so that analysts can verify the consistency among several different kinds of diagrams in UML efficiently by employing system-side prototyping without the detailed model. The system-side prototype system does not have any functions to achieve business logic, but visualizes the results of the integration among the diagrams in UML as Web pages. The usefulness of our proposal was evaluated by applying our proposal into a development of Library Management System (LMS) for a laboratory. This development was conducted by a group. As the result, our proposal was useful for discovering the serious inconsistency caused by the misunderstanding among the members of the group.

  20. Development of an Adolescent Alcohol Misuse Intervention Based on the Prototype Willingness Model: A Delphi Study

    Science.gov (United States)

    Davies, Emma; Martin, Jilly; Foxcroft, David

    2016-01-01

    Purpose: The purpose of this paper is to report on the use of the Delphi method to gain expert feedback on the identification of behaviour change techniques (BCTs) and development of a novel intervention to reduce adolescent alcohol misuse, based on the Prototype Willingness Model (PWM) of health risk behaviour. Design/methodology/approach: Four…

  1. Teaching Tip: Using Rapid Game Prototyping for Exploring Requirements Discovery and Modeling

    Science.gov (United States)

    Dalal, Nikunj

    2012-01-01

    We describe the use of rapid game prototyping as a pedagogic technique to experientially explore and learn requirements discovery, modeling, and specification in systems analysis and design courses. Students have a natural interest in gaming that transcends age, gender, and background. Rapid digital game creation is used to build computer games…

  2. Rapid Prototyping 3D Model in Treatment of Pediatric Hip Dysplasia: A Case Report.

    Science.gov (United States)

    Holt, Andrew M; Starosolski, Zbigniew; Kan, J Herman; Rosenfeld, Scott B

    2017-01-01

    Rapid prototyping is an emerging technology that integrates common medical imaging with specialized production mechanisms to create detailed anatomic replicas. 3D-printed models of musculoskeletal anatomy have already proven useful in orthopedics and their applications continue to expand. We present the case of a 10 year-old female with Down syndrome and left acetabular dysplasia and chronic hip instability who underwent periacetabular osteotomy. A rapid prototyping 3D model was created to better understand the anatomy, counsel the family about the problem and the surgical procedure, as well as guide surgical technique. The intricate detail and size match of the model with the patient's anatomy offered unparalleled, hands-on experience with the patient's anatomy pre-operatively and improved surgical precision. Our experience with rapid prototyping confirmed its ability to enhance orthopedic care by improving the surgeon's ability to understand complex anatomy. Additionally, we report a new application utilizing intraoperative fluoroscopic comparison of the model and patient to ensure surgical precision and minimize the risk of complications. This technique could be used in other challenging cases. The increasing availability of rapid prototyping welcomes further use in all areas of orthopedics.

  3. NE Ohio Urban Growth Monitoring and Modeling Prototype. Revised

    Science.gov (United States)

    Siebert, Loren; Klosterman, Richard E.

    2001-01-01

    At the University of Akron, Dr. Loren Siebert, Dr. Richard Klosterman, and their graduate research assistants (Jung-Wook Kim, Mohammed Hoque, Aziza Parveen, and Ben Stabler) worked on the integration of remote sensing and GIs-based planning support systems. The primary goal of the project was to develop methods that use remote sensing land cover mapping and GIs-based modeling to monitor and project urban growth and farmland loss in northeast Ohio. Another research goal has been to use only GIS data that are accessible via the World Wide Web, to determine whether Ohio's small counties and townships that do not currently have parcel-level GIS systems can apply these techniques. The project was jointly funded by NASA and USGS OhioView grants during the 2000-2001 academic year; the work is now being continued under a USGS grant.

  4. Boron-10 ABUNCL Prototype Models And Initial Active Testing

    Energy Technology Data Exchange (ETDEWEB)

    Kouzes, Richard T.; Ely, James H.; Lintereur, Azaree T.; Siciliano, Edward R.

    2013-04-23

    The Department of Energy Office of Nuclear Safeguards and Security (NA-241) is supporting the project Coincidence Counting With Boron-Based Alternative Neutron Detection Technology at Pacific Northwest National Laboratory (PNNL) for the development of a 3He proportional counter alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a system based upon 10B-lined proportional tubes in a configuration typical for 3He-based coincidence counter applications. This report provides results from MCNPX model simulations and initial testing of the active mode variation of the Alternative Boron-Based Uranium Neutron Coincidence Collar (ABUNCL) design built by General Electric Reuter-Stokes. Initial experimental testing of the as-delivered passive ABUNCL was previously reported.

  5. Prototypical model for tensional wrinkling in thin sheets

    KAUST Repository

    Davidovitch, B.

    2011-10-31

    The buckling and wrinkling of thin films has recently seen a surge of interest among physicists, biologists, mathematicians, and engineers. This activity has been triggered by the growing interest in developing technologies at ever-decreasing scales and the resulting necessity to control the mechanics of tiny structures, as well as by the realization that morphogenetic processes, such as the tissue-shaping instabilities occurring in animal epithelia or plant leaves, often emerge from mechanical instabilities of cell sheets. Although the most basic buckling instability of uniaxially compressed plates was understood by Euler more than two centuries ago, recent experiments on nanometrically thin (ultrathin) films have shown significant deviations from predictions of standard buckling theory. Motivated by this puzzle, we introduce here a theoretical model that allows for a systematic analysis of wrinkling in sheets far from their instability threshold. We focus on the simplest extension of Euler buckling that exhibits wrinkles of finite length--a sheet under axisymmetric tensile loads. The first study of this geometry, which is attributed to Lamé, allows us to construct a phase diagram that demonstrates the dramatic variation of wrinkling patterns from near-threshold to far-from-threshold conditions. Theoretical arguments and comparison to experiments show that the thinner the sheet is, the smaller is the compressive load above which the far-from-threshold regime emerges. This observation emphasizes the relevance of our analysis for nanomechanics applications.

  6. Are organ donation communication decisions reasoned or reactive? A test of the utility of an augmented theory of planned behaviour with the prototype/willingness model.

    Science.gov (United States)

    Hyde, Melissa K; White, Katherine M

    2010-05-01

    To explore whether people's organ donation consent decisions occur via a reasoned and/or social reaction pathway. We examined prospectively students' and community members' decisions to register consent on a donor register and discuss organ donation wishes with family. Participants completed items assessing theory of planned behaviour (TPB; attitude, subjective norm, perceived behavioural control (PBC)), prototype/willingness model (PWM; donor prototype favourability/similarity, past behaviour), and proposed additional influences (moral norm, self-identity, recipient prototypes) for registering (N=339) and discussing (N=315) intentions/willingness. Participants self-reported their registering (N=177) and discussing (N=166) behaviour 1 month later. The utility of the (1) TPB, (2) PWM, (3) augmented TPB with PWM, and (4) augmented TPB with PWM and extensions was tested using structural equation modelling for registering and discussing intentions/willingness, and logistic regression for behaviour. While the TPB proved a more parsimonious model, fit indices suggested that the other proposed models offered viable options, explaining greater variance in communication intentions/willingness. The TPB, augmented TPB with PWM, and extended augmented TPB with PWM best explained registering and discussing decisions. The proposed and revised PWM also proved an adequate fit for discussing decisions. Respondents with stronger intentions (and PBC for registering) had a higher likelihood of registering and discussing. People's decisions to communicate donation wishes may be better explained via a reasoned pathway (especially for registering); however, discussing involves more reactive elements. The role of moral norm, self-identity, and prototypes as influences predicting communication decisions were highlighted also.

  7. Validation of a FAST Model of the SWAY Prototype Floating Wind Turbine

    Energy Technology Data Exchange (ETDEWEB)

    Koh, J. H. [Nanyang Technological Univ. (Singapore); Ng, E. Y. K. [Nanyang Technological Univ. (Singapore); Robertson, Amy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jonkman, Jason [National Renewable Energy Lab. (NREL), Golden, CO (United States); Driscoll, Frederick [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-06-01

    As part of a collaboration of the National Renewable Energy Laboratory (NREL) and SWAY AS, NREL installed scientific wind, wave, and motion measurement equipment on the spar-type 1/6.5th-scale prototype SWAY floating offshore wind system. The equipment enhanced SWAY's data collection and allowed SWAY to verify the concept and NREL to validate a FAST model of the SWAY design in an open-water condition. Nanyang Technological University (NTU), in collaboration with NREL, assisted with the validation. This final report gives an overview of the SWAY prototype and NREL and NTU's efforts to validate a model of the system. The report provides a summary of the different software tools used in the study, the modeling strategies, and the development of a FAST model of the SWAY prototype wind turbine, including justification of the modeling assumptions. Because of uncertainty in system parameters and modeling assumptions due to the complexity of the design, several system properties were tuned to better represent the system and improve the accuracy of the simulations. Calibration was performed using data from a static equilibrium test and free-decay tests.

  8. Rapid prototyping and 3D-virtual models for operative dentistry education in Brazil.

    Science.gov (United States)

    Soares, Paulo Vinícius; de Almeida Milito, Giovana; Pereira, Fabrícia Araújo; Reis, Bruno Rodrigues; Soares, Carlos José; de Sousa Menezes, Murilo; de Freitas Santos-Filho, Paulo César

    2013-03-01

    Many dental students struggle for visual recognition when first exposed to the study of tooth cavity preparation in the operative dentistry laboratory. Rapid prototypes and virtual models of different cavity preparations were developed for the incoming first-year class of 2010 at the Dental School of Federal University of Uberlândia, Brazil, to help them to visualize the subtle differences in cavity preparations and are described in this article. Rapid prototyping techniques have been used in dental therapy, mainly for the fabrication of models to ease surgical planning in implantology, orthodontics, and maxillofacial prostheses. On the other hand, the application of these technologies associated with 3D-virtual models in dental education is waiting to be exploited, once they have significant potential to complement conventional training methods in dentistry.

  9. Greenbrier Prototype

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-06-18

    This case study describes a prototype home that is the model home for the Homes at Greenbrier in Oakdale, Connecticut, and demonstrates the builder's concept of “attainable sustainable” of offering high performance homes at mid-market prices.

  10. Infrared properties of a prototype model for beyond-Standard Model physics

    CERN Document Server

    Hasenfratz, Anna; Witzel, Oliver

    2016-01-01

    We construct a prototype BSM model based on the SU(3) color gauge group and a combination of 4 light (massless) and 8 heavy flavors. In the infrared, the SU(4) flavor chiral symmetry is spontaneously broken, while in the ultraviolet this model exhibits the properties of the $N_f=12$ conformal fixed point. Renormalization group considerations predict the spectrum of such a system to show hyperscaling, i.e. dimensionless ratios of hadron masses or decay constants are independent of the heavy mass. Hyperscaling is present for bound states of light, heavy, or a combination of heavy and light flavors and leads to a strongly predictive model. Despite chiral symmetry breaking, this system features a spectrum exhibiting a very non-QCD like behavior. Furthermore, the gauge coupling becomes an irrelevant parameter. We support these expectations by presenting numerical results based on four different values of the heavy quark mass $am_h$, up to six different values of the light quark mass $am_\\ell$, and include, for the...

  11. Delimitation of the user in the creation stages, modeling and prototyping of the clothing product

    Directory of Open Access Journals (Sweden)

    Elen Makara

    2016-12-01

    Full Text Available Because of complaints of clothes that do not fit well and bother, or even the difficulty of acquiring a suitable outfit for an occasion, to the clothing industry may be failing to consider the user in developing their products. The aim of this paper was to determine whether the steps for creating, modeling and prototyping of garment products the user is being considered, as for a design project is right to consider it at all stages of development. For this a literature review and interviews with professionals was held. With the results we can see the difficulty that professionals have to define the public to create the pieces. We also found that most professionals understand the importance of measures table however end up adjusting the empirically, and the realization of prototype testing many choose models that does not match the reality of the public company

  12. The Utility of the Prototype/Willingness Model in Predicting Alcohol Use among North American Indigenous Adolescents

    Science.gov (United States)

    Armenta, Brian E.; Hautala, Dane S.; Whitbeck, Les B.

    2015-01-01

    In the present study, we considered the utility of the prototype/willingness model in predicting alcohol use among North-American Indigenous adolescents. Specifically, using longitudinal data, we examined the associations among subjective drinking norms, positive drinker prototypes, drinking expectations (as a proxy of drinking willingness), and…

  13. Wind Tunnel Model Design and Test Using Rapid Prototype Materials and Processes

    Science.gov (United States)

    2001-07-23

    UNCLASSIFIED WIND TUNNEL MODEL DESIGN AND TEST USING RAPID PROTOTYPE MATERIALS AND PROCESSES Richard R. Heisler and Clifford L. Ratliff The Johns Hopkins...deflection, and attach directly to the strongback with screws. A and tolerance deviations when the material was grown. schematic diagram of the RPM...constructed around the clay to contain the I. R. R. Heisler , "Final Test Report for the Wind pouring of silicon resin. Tunnel Test of the JHU/APL WTM-01 at

  14. A multimodality imaging model to track viable breast cancer cells from single arrest to metastasis in the mouse brain

    Science.gov (United States)

    Parkins, Katie M.; Hamilton, Amanda M.; Makela, Ashley V.; Chen, Yuanxin; Foster, Paula J.; Ronald, John A.

    2016-10-01

    Cellular MRI involves sensitive visualization of iron-labeled cells in vivo but cannot differentiate between dead and viable cells. Bioluminescence imaging (BLI) measures cellular viability, and thus we explored combining these tools to provide a more holistic view of metastatic cancer cell fate in mice. Human breast carcinoma cells stably expressing Firefly luciferase were loaded with iron particles, injected into the left ventricle, and BLI and MRI were performed on days 0, 8, 21 and 28. The number of brain MR signal voids (i.e., iron-loaded cells) on day 0 significantly correlated with BLI signal. Both BLI and MRI signals decreased from day 0 to day 8, indicating a loss of viable cells rather than a loss of iron label. Total brain MR tumour volume on day 28 also correlated with BLI signal. Overall, BLI complemented our sensitive cellular MRI technologies well, allowing us for the first time to screen animals for successful injections, and, in addition to MR measures of cell arrest and tumor burden, provided longitudinal measures of cancer cell viability in individual animals. We predict this novel multimodality molecular imaging framework will be useful for evaluating the efficacy of emerging anti-cancer drugs at different stages of the metastatic cascade.

  15. Adolescents' eating behaviour in general and in the peer context: testing the prototype-willingness model.

    Science.gov (United States)

    Dohnke, Birte; Steinhilber, Amina; Fuchs, Tanja

    2015-01-01

    To investigate the prototype-willingness model (PWM) for eating behaviour in general and in the peer context in order to gain further evidence on the PWM and social-reactive processes in adolescents' eating behaviour. A longitudinal study was conducted. PWM variables for unhealthy and healthy eating were assessed at baseline in 356 adolescents (mean age 12.61 years). Eating behaviour was measured four weeks after baseline by two indicators: general eating pattern index (self-report) and consumption of unhealthy and healthy snacks in the peer context (behavioural observation). For both, structural equation models were conducted introducing PWM variables for either unhealthy or healthy eating. The PWM was mainly confirmed for the eating pattern index; intention, willingness and prototype perception had direct effects. Differences between unhealthy and healthy eating were found. Moreover, the PWM contributed to the prediction of healthy, but not unhealthy, snack consumption over and above current hunger; willingness had a direct effect. The PWM can be applied to predict and understand adolescents' eating behaviour. Social-reactive processes, namely willingness and prototype perception, are behavioural determinants that should be considered in theory and as novel targets in health promotion interventions.

  16. Personality prototypes in individuals with compulsive buying based on the Big Five Model.

    Science.gov (United States)

    Mueller, Astrid; Claes, Laurence; Mitchell, James E; Wonderlich, Steve A; Crosby, Ross D; de Zwaan, Martina

    2010-09-01

    Personality prototypes based on the Big Five factor model were investigated in a treatment-seeking sample of 68 individuals with compulsive buying (CB). Cluster analysis of the NEO Five-Factor Inventory (NEO-FFI) scales yielded two distinct personality clusters. Participants in cluster II scored significantly higher than those in cluster I on neuroticism and lower on the other four personality traits. Subjects in cluster II showed higher severity of CB, lower degree of control over CB symptoms, and were more anxious, interpersonally sensitive and impulsive. Furthermore, cluster II was characterized by higher rates of comorbid anxiety disorders, and cluster B personality disorders. The two personality prototypes did not differ with respect to obsessive-compulsive features. Finally and of considerable clinical significance, participants in cluster II reported lower remission rates after undergoing cognitive-behavioral therapy. Implications of the results for treatment are discussed. 2010 Elsevier Ltd. All rights reserved.

  17. Replication of human tracheobronchial hollow airway models using a selective laser sintering rapid prototyping technique.

    Science.gov (United States)

    Clinkenbeard, Rodney E; Johnson, David L; Parthasarathy, Ramkumar; Altan, M Cengiz; Tan, Kah-Hoe; Park, Seok-Min; Crawford, Richard H

    2002-01-01

    Exposures to toxic or pathogenic aerosols are known to produce adverse health effects. The nature and severity of these effects often are governed in large part by the location and amount of aerosol deposition within the respiratory tract. Morphologically detailed replica hollow lung airway casts are widely used in aerosol deposition research; however, techniques are not currently available that allow replicate deposition studies in identical morphologically detailed casts produced from a common reference anatomy. This project developed a technique for the precision manufacture of morphologically detailed human tracheobronchial airway models based on high-resolution anatomical imaging data. Detailed physical models were produced using the selective laser sintering (SLS) rapid prototyping process. Input to the SLS process was a three-dimensional computer model developed by boundary-based two-dimension to three-dimension conversion of anatomical images from the original National Institutes of Health/National Library of Medicine Visible Human male data set. The SLS process produced identical replicate models that corresponded exactly to the anatomical section images, within the limits of the measurement. At least five airway generations were achievable, corresponding to airways less than 2 mm in diameter. It is anticipated that rapid prototyping manufacture of respiratory tract structures based on reference anatomies such as the Visible Male and Visible Female may provide "gold standard" models for inhaled aerosol deposition studies. Adaptations of the models to represent various disease states may be readily achieved, thereby promoting exploration of pharmaceutical research on targeted drug delivery via inhaled aerosols.

  18. Modelling of Helium-mediated Quench Propagation in the LHC Prototype Test String-1

    CERN Document Server

    Chorowski, M; Serio, L; Van Weelderen, R

    2000-01-01

    The Large Hadron Collider (LHC) prototype test string-1, hereafter referred to as the string, is composed of three ten-meter long prototype dipole magnets and one six-meter long prototype quadrupole magnet. The magnets are immersed in a pressurized static bath of superfluid helium that is maintained at a pressure of about 1 bar and at a temperature of about 1.9 K. This helium bath constitutes one single hydraulic unit, extending along the 42.5 m of the string length. We have measured the triggering of quenches of the string magnets due to the quenching of a single dipole magnet located at the string's extremity; i.e. "quench propagation". Previously reported measurements enabled to establish that in this configuration the quench propagation is mediated by the helium and not by the inter-magnet busbar connections [1], [2]. We present a model of helium mediated quench propagation based on the qualitative conclusions of these two previous papers, and on additional information gained from a dedicated series of qu...

  19. Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic

    Directory of Open Access Journals (Sweden)

    D. P. C. Velazco

    2014-12-01

    Full Text Available Computer assisted designing (CAD is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical. From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes

  20. An EIS based study of a Ni-MH battery prototype. Modeling and identification analysis

    Energy Technology Data Exchange (ETDEWEB)

    Castro, E.B. [Instituto de Investigaciones Fisicoquimicas Teoricas y Aplicadas (INIFTA). Universidad Nacional de La Plata., CCT La Plata-CONICET, Suc 4, CC16 (1900), La Plata (Argentina); Cuscueta, D.J.; Ghilarducci, A.A.; Salva, H.R. [Centro Atomico Bariloche - Comision Nacional de Energia Atomica (CAB-CNEA), Instituto Balseiro - Universidad Nacional de Cuyo (IB-UNCu), CONICET, Av. Bustillo 9500 - CAB (8400) San Carlos de Bariloche (Argentina); Milocco, R.H. [Grupo de Control Automatico y Sistemas (GCAyS), Depto. Electrotecnia, Facultad de Ingenieria, Universidad Nacional del Comahue, Buenos Aires 1400 (8300) Neuquen (Argentina)

    2010-06-15

    Modeling and simulation of the dynamics of batteries is a useful method to improve design and predict their performance. This paper outlines the development of a simple physicochemical model to simulate the impedance response of the Ni-MH battery system. The model describes the individual electrodes as porous flooded structures where the electrochemical processes take place at the active material/electrolyte interface. The physicochemical system parameters are grouped in such a way that the derived simple model can be experimentally identifiable. Experimental electrochemical impedance spectroscopy (EIS) data, recorded with a laboratory built prototype, are used to identify the model parameters by fitting the theoretical impedance function derived from the model. An analysis of the predicted dependence of the impedance function with the battery SOC and the identifiability of different system parameters are presented. (author)

  1. Creating pathology models from MRI data: a comparison of virtual 3D modelling and rapid prototyping techniques.

    Science.gov (United States)

    Challoner, Alexandra; Erolin, Caroline

    2013-06-01

    This paper discusses a pilot study in collaboration between the Centre for Anatomy and Human Identification and the Pathology Department at Ninewells Hospital, Dundee. Anonymised patient MRI data depicting renal cancer was used to create a virtual 3D model and two rapid prototype models of the kidneys and surrounding anatomy. A questionnaire was conducted to collect feedback from tutors and students in order to evaluate the models and determine user preference. It was found that the majority preferred the physical models to the virtual model.

  2. Building and Calibration of a FAST Model of the SWAY Prototype Floating Wind Turbine: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Koh, J. H.; Robertson, A.; Jonkman, J.; Driscoll, F.; Ng, E. Y. K.

    2013-09-01

    Present efforts to verify and validate aero-hydro-servo-elastic numerical simulation tools that predict the dynamic response of a floating offshore wind turbine are primarily limited to code-to-code comparisons or code-to-data comparisons using data from wind-wave basin tests. In partnership with SWAY AS, the National Renewable Energy Laboratory (NREL) installed scientific wind, wave, and motion measurement equipment on the 1/6.5th-scale prototype SWAY floating wind system to collect data to validate a FAST model of the SWAY design in an open-water condition. Nanyang Technological University (NTU), through a collaboration with NREL, assisted in this validation.

  3. Dynamic Characteristics of a Model and Prototype for 3D-RC Structure

    Science.gov (United States)

    Moniuddin, Md. Khaja; Vasanthalakshmi, G.; Chethan, K.; Babu, R. Ramesh

    2016-06-01

    Infill walls provide durable and economical partitions that have relatively excellent thermal and sound insulation with high fire resistance. Monolithic infilled walls are provided within RC structures without being analyzed as a combination of concrete and brick elements, although in reality they act as a single unit during earthquakes. The performance of such structures during earthquakes has proved to be superior in comparison to bare frames in terms of stiffness, strength and energy dissipation. To know the dynamic characteristics of monolithic infill wall panels and masonry infill, modal, response spectrum and time history analyses have been carried out on a model and prototype of a 3D RC structure for a comparative study.

  4. Business intelligence tools for radiology: creating a prototype model using open-source tools.

    Science.gov (United States)

    Prevedello, Luciano M; Andriole, Katherine P; Hanson, Richard; Kelly, Pauline; Khorasani, Ramin

    2010-04-01

    Digital radiology departments could benefit from the ability to integrate and visualize data (e.g. information reflecting complex workflow states) from all of their imaging and information management systems in one composite presentation view. Leveraging data warehousing tools developed in the business world may be one way to achieve this capability. In total, the concept of managing the information available in this data repository is known as Business Intelligence or BI. This paper describes the concepts used in Business Intelligence, their importance to modern Radiology, and the steps used in the creation of a prototype model of a data warehouse for BI using open-source tools.

  5. Prediction of Francis Turbine Prototype Part Load Pressure and Output Power Fluctuations with Hydroelectric Model

    Science.gov (United States)

    Alligné, S.; Nicolet, C.; Béguin, A.; Landry, C.; Gomes, J.; Avellan, F.

    2017-04-01

    The prediction of pressure and output power fluctuations amplitudes on Francis turbine prototype is a challenge for hydro-equipment industry since it is subjected to guarantees to ensure smooth and reliable operation of the hydro units. The European FP7 research project Hyperbole aims to setup a methodology to transpose the pressure fluctuations induced by the cavitation vortex rope from the reduced scale model to the prototype generating units. A Francis turbine unit of 444MW with a specific speed value of ν = 0.29, is considered as case study. A SIMSEN model of the power station including electrical system, controllers, rotating train and hydraulic system with transposed draft tube excitation sources is setup. Based on this model, a frequency analysis of the hydroelectric system is performed for all technologies to analyse potential interactions between hydraulic excitation sources and electrical components. Three technologies have been compared: the classical fixed speed configuration with Synchronous Machine (SM) and the two variable speed technologies which are Doubly Fed Induction Machine (DFIM) and Full Size Frequency Converter (FSFC).

  6. Development of a prototype Typhoon Risk Model over the Korean Peninsula

    Science.gov (United States)

    Kim, K. Y.; Cocke, S.; Shin, D. W.; CHOI, M.; Kwon, J.

    2016-12-01

    Risk can be defined as probability of a given hazard of a given level causing a particular level of loss of damage (Alexander, 2000). Risk management is important for mitigation and developing plans for emergencies. More effective risk management strategies can help reduce potential losses from natural disasters like typhoon, floods, earthquakes, and so on. We are developing a prototype typhoon risk model to assess the current and potentially future hazard due to typhoons in the Western Pacific. To develop the typhoon risk model, a variety of sources of data over Korea are used such as population, damage to buildings, agriculture, ships, etc. The model is based on proven concepts used in catastrophe models that have been used in the U.S. and other regions of the world. Recently, the sea surface temperatures where typhoons have occurred have tended to increase. According to recent studies of global warming, the intensity of typhoons could increase, and the frequency of typhoons may decrease in the future climate. The prototype risk model can help us determine the change in risk as a consequence of the change in typhoon activity. We focus on Korea and other regions of interest to Korean insurers, re-insurers, and related industries. The model can potentially be coupled to various damage models or emergency management systems for planning and mitigation. In addition, the assessment would be useful for emergency planners, coastal community planners, and private and governmental insurance programs. This work was funded by the Korea Meteorological Administration Research and Development Program under Grant KMIPA2016-8030.

  7. A Rasch model prototype for assessing vocabulary learning resulting from different instructional methods: a preschool example.

    Science.gov (United States)

    Leung, Cynthia B; Lang, William Steve

    2009-01-01

    This study explored the effects of using Rasch modeling to analyze data on vocabulary knowledge of preschoolers who participated in repeated read-aloud events and hands-on science activities with their classroom teachers. A Rasch prototype for literacy research was developed and applied to the preschool data. Thirty-one target words were selected for analysis from three children's informational picture books on light and color. After different instructional activities, each child received scores on individual target words measured with a total of six assessments, including free response vocabulary tests and expressive and receptive picture vocabulary tests. Rasch modeling was used to assess the learning difficulty of target words in different instructional settings. Suggestions are made for applying Rasch modeling to classroom studies of instructional interventions.

  8. 3D imaging acquisition, modeling, and prototyping for facial defects reconstruction

    Science.gov (United States)

    Sansoni, Giovanna; Trebeschi, Marco; Cavagnini, Gianluca; Gastaldi, Giorgio

    2009-01-01

    A novel approach that combines optical three-dimensional imaging, reverse engineering (RE) and rapid prototyping (RP) for mold production in the prosthetic reconstruction of facial prostheses is presented. A commercial laser-stripe digitizer is used to perform the multiview acquisition of the patient's face; the point clouds are aligned and merged in order to obtain a polygonal model, which is then edited to sculpture the virtual prothesis. Two physical models of both the deformed face and the 'repaired' face are obtained: they differ only in the defect zone. Depending on the material used for the actual prosthesis, the two prototypes can be used either to directly cast the final prosthesis or to fabricate the positive wax pattern. Two case studies are presented, referring to prostetic reconstructions of an eye and of a nose. The results demonstrate the advantages over conventional techniques as well as the improvements with respect to known automated manufacturing techniques in the mold construction. The proposed method results into decreased patient's disconfort, reduced dependence on the anaplasthologist skill, increased repeatability and efficiency of the whole process.

  9. Prototyping the Semantics of a DSL using ASF+SDF: Link to Formal Verification of DSL Models

    Directory of Open Access Journals (Sweden)

    Suzana Andova

    2011-06-01

    Full Text Available A formal definition of the semantics of a domain-specific language (DSL is a key prerequisite for the verification of the correctness of models specified using such a DSL and of transformations applied to these models. For this reason, we implemented a prototype of the semantics of a DSL for the specification of systems consisting of concurrent, communicating objects. Using this prototype, models specified in the DSL can be transformed to labeled transition systems (LTS. This approach of transforming models to LTSs allows us to apply existing tools for visualization and verification to models with little or no further effort. The prototype is implemented using the ASF+SDF Meta-Environment, an IDE for the algebraic specification language ASF+SDF, which offers efficient execution of the transformation as well as the ability to read models and produce LTSs without any additional pre or post processing.

  10. Mutual coupling of hydrologic and hydrodynamic models - a viable approach for improved large-scale inundation estimates?

    Science.gov (United States)

    Hoch, Jannis; Winsemius, Hessel; van Beek, Ludovicus; Haag, Arjen; Bierkens, Marc

    2016-04-01

    Due to their increasing occurrence rate and associated economic costs, fluvial floods are large-scale and cross-border phenomena that need to be well understood. Sound information about temporal and spatial variations of flood hazard is essential for adequate flood risk management and climate change adaption measures. While progress has been made in assessments of flood hazard and risk on the global scale, studies to date have made compromises between spatial resolution on the one hand and local detail that influences their temporal characteristics (rate of rise, duration) on the other. Moreover, global models cannot realistically model flood wave propagation due to a lack of detail in channel and floodplain geometry, and the representation of hydrologic processes influencing the surface water balance such as open water evaporation from inundated water and re-infiltration of water in river banks. To overcome these restrictions and to obtain a better understanding of flood propagation including its spatio-temporal variations at the large scale, yet at a sufficiently high resolution, the present study aims to develop a large-scale modeling tool by coupling the global hydrologic model PCR-GLOBWB and the recently developed hydrodynamic model DELFT3D-FM. The first computes surface water volumes which are routed by the latter, solving the full Saint-Venant equations. With DELFT3D FM being capable of representing the model domain as a flexible mesh, model accuracy is only improved at relevant locations (river and adjacent floodplain) and the computation time is not unnecessarily increased. This efficiency is very advantageous for large-scale modelling approaches. The model domain is thereby schematized by 2D floodplains, being derived from global data sets (HydroSHEDS and G3WBM, respectively). Since a previous study with 1way-coupling showed good model performance (J.M. Hoch et al., in prep.), this approach was extended to 2way-coupling to fully represent evaporation

  11. A multi-layered approach to product architecture modeling: Applied to technology prototypes

    DEFF Research Database (Denmark)

    Ravn, Poul Martin; Guðlaugsson, Tómas Vignir; Mortensen, Niels Henrik

    2016-01-01

    Companies that wish to include novel technology in the product portfolio may need to test and evaluate the technology with the use of prototypes to learn its benefits. Without clear knowledge of the benefits of the technology to the products in the portfolio, in the form of increased performance......, added functions, or material savings, the prototype development can be hard to manage. In this article, two contributions are made. The first adds to the vocabulary of prototyping, defining technology prototype, a prototype used for testing a novel technology in the context of an existing product...

  12. What's in a likelihood? Simple models of protein evolution and the contribution of structurally viable reconstructions to the likelihood.

    Science.gov (United States)

    Lakner, Clemens; Holder, Mark T; Goldman, Nick; Naylor, Gavin J P

    2011-03-01

    Most phylogenetic models of protein evolution assume that sites are independent and identically distributed. Interactions between sites are ignored, and the likelihood can be conveniently calculated as the product of the individual site likelihoods. The calculation considers all possible transition paths (also called substitution histories or mappings) that are consistent with the observed states at the terminals, and the probability density of any particular reconstruction depends on the substitution model. The likelihood is the integral of the probability density of each substitution history taken over all possible histories that are consistent with the observed data. We investigated the extent to which transition paths that are incompatible with a protein's three-dimensional structure contribute to the likelihood. Several empirical amino acid models were tested for sequence pairs of different degrees of divergence. When simulating substitutional histories starting from a real sequence, the structural integrity of the simulated sequences quickly disintegrated. This result indicates that simple models are clearly unable to capture the constraints on sequence evolution. However, when we sampled transition paths between real sequences from the posterior probability distribution according to these same models, we found that the sampled histories were largely consistent with the tertiary structure. This suggests that simple empirical substitution models may be adequate for interpolating changes between observed sequences during phylogenetic inference despite the fact that the models cannot predict the effects of structural constraints from first principles. This study is significant because it provides a quantitative assessment of the biological realism of substitution models from the perspective of protein structure, and it provides insight on the prospects for improving models of protein sequence evolution.

  13. Prototype of Intrusion Detection Model using UML 5.0 and Forward Engineering

    Directory of Open Access Journals (Sweden)

    Muthaiyan MADIAJAGAN,

    2011-01-01

    Full Text Available In this paper we are using UML (Unified Modeling Language which is the blueprint language between the programmers, analysts, and designer’s for easy representation of pictures or diagrammatic notation with some textual data. Here we are using UML 5.0 to show “prototype of the Intrusion Detection Model” and by explaining it by combining various parts by drawing various UML diagrams such as Use cases and Activity diagrams and Class Diagram using which we show forward engineering using the class diagram of the IDM( Intrusion Detection Model. IDM is a device or software that works on detecting malicious activities by unauthorized users that can cause breach to the security policy within a network.

  14. Collaborative Prototyping

    DEFF Research Database (Denmark)

    Bogers, Marcel; Horst, Willem

    2014-01-01

    This paper presents an inductive study that shows how collaborative prototyping across functional, hierarchical, and organizational boundaries can improve the overall prototyping process. Our combined action research and case study approach provides new insights into how collaborative prototyping...... can provide a platform for prototype-driven problem solving in early new product development (NPD). Our findings have important implications for how to facilitate multistakeholder collaboration in prototyping and problem solving, and more generally for how to organize collaborative and open innovation...... processes. Our analysis reveals two levels of prototyping. Besides the more formal managerial level, we identify the informal designer level, where the actual practice of prototyping takes place. On this level, collaborative prototyping transforms the act of prototyping from an activity belonging...

  15. State-and-transition prototype model of riparian vegetation downstream of Glen Canyon Dam, Arizona

    Science.gov (United States)

    Ralston, Barbara E.; Starfield, Anthony M.; Black, Ronald S.; Van Lonkhuyzen, Robert A.

    2014-01-01

    Facing an altered riparian plant community dominated by nonnative species, resource managers are increasingly interested in understanding how to manage and promote healthy riparian habitats in which native species dominate. For regulated rivers, managing flows is one tool resource managers consider to achieve these goals. Among many factors that can influence riparian community composition, hydrology is a primary forcing variable. Frame-based models, used successfully in grassland systems, provide an opportunity for stakeholders concerned with riparian systems to evaluate potential riparian vegetation responses to alternative flows. Frame-based, state-and-transition models of riparian vegetation for reattachment bars, separation bars, and the channel margin found on the Colorado River downstream of Glen Canyon Dam were constructed using information from the literature. Frame-based models can be simple spreadsheet models (created in Microsoft® Excel) or developed further with programming languages (for example, C-sharp). The models described here include seven community states and five dam operations that cause transitions between states. Each model divides operations into growing (April–September) and non-growing seasons (October–March) and incorporates upper and lower bar models, using stage elevation as a division. The inputs (operations) can be used by stakeholders to evaluate flows that may promote dynamic riparian vegetation states, or identify those flow options that may promote less desirable states (for example, Tamarisk [Tamarix sp.] temporarily flooded shrubland). This prototype model, although simple, can still elicit discussion about operational options and vegetation response.

  16. Distributed ecohydrological modelling to evaluate irrigation system performance in Sirsa district, India II: Impact of viable water management scenarios

    NARCIS (Netherlands)

    Singh, R.; Jhorar, R.K.; Dam, van J.C.; Feddes, R.A.

    2006-01-01

    This study focuses on the identification of appropriate strategies to improve water management and productivity in an irrigated area of 4270 km2 in India (Sirsa district). The field scale ecohydrological model SWAP in combination with field experiments, remote sensing and GIS has been applied in a

  17. The "Surgeon on Service" Model for Timely, Economically Viable Inpatient Care of Tracheostomy Patients in Academic Pediatric Otolaryngology.

    Science.gov (United States)

    Lavin, Jennifer M; Schroeder, James W; Thompson, Dana M

    2017-10-01

    The traditional practice model for pediatric otolaryngologists at high-volume academic centers is to simultaneously balance outpatient care responsibilities with those of the inpatient service, emergency department, and ambulatory care clinics. This model leads to challenges with care coordination, timeliness of nonemergency operative care, and consistent participation in care and consultation at the attending surgeon level. The "surgeon on service" (SOS) model-where faculty members rotate to manage the inpatient service in lieu of outpatient responsibilities-has been described as one method to address this conundrum. The operational and economic feasibility of the SOS model has been demonstrated; however, its impact on care coordination, time from consultation to surgical care, and length of stay (LOS) have not been evaluated. To determine the impact of the SOS model on the quality principles of timeliness and efficiency of tracheostomy tube placement and to determine if the SOS model is fiscally feasible in an academic pediatric otolaryngology practice. Medical record review of patients undergoing tracheostomy in a pediatric academic medical center and survey of their treating physician trainees, comparing the 6-month SOS pilot phase (postimplementation, January-June 2016) with the 6-month preimplementation period (January-June 2015). Implementation of the SOS model. Time to tracheostomy, frequency of successful coordination of tracheostomy with gastrostomy tube placement, total LOS, productivity measured in work relative value units, and responses to trainee surveys. Of the 41 patients included in the study (24 boys and 17 girls; mean age, 3 years; range, 3 months to 17 years), 15 were treated before SOS implementation, and 26 after. Also included were 21 trainees. Before SOS implementation, median time to tracheostomy was 7 days (range, 2-20 days); after SOS implementation, it was 4 days (range, 1-10 days) (difference between the medians, before to after, -3

  18. SXI prototype mirror mount

    Science.gov (United States)

    1995-04-01

    The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule. A number of development hardware parts have been designed and fabricated jointly by MSFC and UAH for the engineering model of SXI. The major parts include a nickel electroformed mirror and a mirror mount, plating and coating of the ceramic spacers, and gold plating of the contact rings and fingers for the camera assembly. An aluminum model of the high accuracy sun sensor (HASS) was also designed and fabricated. A number of fiber optic tapers for the camera assembly were also coated with indium tin oxide and phosphor for testing and evaluation by MSFC. A large number of the SXI optical bench parts were also redesigned and simplified for a prototype telescope. These parts include the forward and rear support flanges, front aperture plate, the graphite epoxy optical bench and a test fixture for the prototype telescope. More than fifty (50) drawings were generated for various components of the prototype telescope. Some of these parts were subsequently fabricated at UAH machine shop or at MSFC or by the outside contractors. UAH also provide technical support to MSFC staff for a number of preliminary and critical design reviews. These design reviews included PDR and CDR for the mirror assembly by United Technologies Optical Systems (UTOS), and the program quarterly reviews, and SXI PDR and CDR. UAH staff also regularly attended the monthly status reviews, and made a significant number of suggestions to improve

  19. SXI prototype mirror mount

    Science.gov (United States)

    1995-01-01

    The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule. A number of development hardware parts have been designed and fabricated jointly by MSFC and UAH for the engineering model of SXI. The major parts include a nickel electroformed mirror and a mirror mount, plating and coating of the ceramic spacers, and gold plating of the contact rings and fingers for the camera assembly. An aluminum model of the high accuracy sun sensor (HASS) was also designed and fabricated. A number of fiber optic tapers for the camera assembly were also coated with indium tin oxide and phosphor for testing and evaluation by MSFC. A large number of the SXI optical bench parts were also redesigned and simplified for a prototype telescope. These parts include the forward and rear support flanges, front aperture plate, the graphite epoxy optical bench and a test fixture for the prototype telescope. More than fifty (50) drawings were generated for various components of the prototype telescope. Some of these parts were subsequently fabricated at UAH machine shop or at MSFC or by the outside contractors. UAH also provide technical support to MSFC staff for a number of preliminary and critical design reviews. These design reviews included PDR and CDR for the mirror assembly by United Technologies Optical Systems (UTOS), and the program quarterly reviews, and SXI PDR and CDR. UAH staff also regularly attended the monthly status reviews, and made a significant number of suggestions to improve

  20. Prototype to product—developing a commercially viable neural prosthesis

    Science.gov (United States)

    Seligman, Peter

    2009-12-01

    The Cochlear implant or 'Bionic ear' is a device that enables people who do not get sufficient benefit from a hearing aid to communicate with the hearing world. The Cochlear implant is not an amplifier, but a device that electrically stimulates the auditory nerve in a way that crudely mimics normal hearing, thus providing a hearing percept. Many recipients are able to understand running speech without the help of lipreading. Cochlear implants have reached a stage of maturity where there are now 170 000 recipients implanted worldwide. The commercial development of these devices has occurred over the last 30 years. This development has been multidisciplinary, including audiologists, engineers, both mechanical and electrical, histologists, materials scientists, physiologists, surgeons and speech pathologists. This paper will trace the development of the device we have today, from the engineering perspective. The special challenges of designing an active device that will work in the human body for a lifetime will be outlined. These challenges include biocompatibility, extreme reliability, safety, patient fitting and surgical issues. It is emphasized that the successful development of a neural prosthesis requires the partnership of academia and industry.

  1. Prototype to product-developing a commercially viable neural prosthesis.

    Science.gov (United States)

    Seligman, Peter

    2009-12-01

    The Cochlear implant or 'Bionic ear' is a device that enables people who do not get sufficient benefit from a hearing aid to communicate with the hearing world. The Cochlear implant is not an amplifier, but a device that electrically stimulates the auditory nerve in a way that crudely mimics normal hearing, thus providing a hearing percept. Many recipients are able to understand running speech without the help of lipreading. Cochlear implants have reached a stage of maturity where there are now 170 000 recipients implanted worldwide. The commercial development of these devices has occurred over the last 30 years. This development has been multidisciplinary, including audiologists, engineers, both mechanical and electrical, histologists, materials scientists, physiologists, surgeons and speech pathologists. This paper will trace the development of the device we have today, from the engineering perspective. The special challenges of designing an active device that will work in the human body for a lifetime will be outlined. These challenges include biocompatibility, extreme reliability, safety, patient fitting and surgical issues. It is emphasized that the successful development of a neural prosthesis requires the partnership of academia and industry.

  2. Applying an empathic design model to gain an understanding of consumers’ cognitive orientations and develop a product prototype

    Directory of Open Access Journals (Sweden)

    Ding-Bang Luh

    2012-06-01

    Full Text Available Purpose: Consideration of consumer opinion is a key success factor when it comes to developing a new product. However, businesses may lack suitable methods for this, and designers may lack practical training, with both situations meaning that firms are unable to precisely adopt consumer opinions. Moreover, consumer cognitions for a product are widely regarded as changeable and abstract. It is worth studying how to determine consumers’ opinions and transform them into references for prototype development. The purpose of this study is thus to create an Empathic Design Model which would be able to determine consumer cognitive orientation.Design/methodology/approach: This model includes observing related phenomena, laddering the cognition, connecting the elements of the Associations Matrix, producing the hierarchy of the following four items, attributes, functional consequences, psychosocial consequences and values, and then producing a prototype to help designers and consumers reach a consensus on the cognitive structure of products.Findings: As demonstrated in a case study of the design of an “electronic tour guide”, the authors developed a prototype that can help a guide to perform their job on a group package tour. Consequently, the Empathic Design Model can be operated and put into practice. By Mind Mapping, the prototype can be then imitated and reinvented by designers as needed.Originality/value: This model focuses on the early phase of the design process, providing the designing industry with a technique to forecast consumers’ potential needs and develop a prototype effectively.

  3. Architectural prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  4. Architectural Prototyping

    DEFF Research Database (Denmark)

    Bardram, Jakob; Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2004-01-01

    A major part of software architecture design is learning how specific architectural designs balance the concerns of stakeholders. We explore the notion of "architectural prototypes", correspondingly architectural prototyping, as a means of using executable prototypes to investigate stakeholders......' concerns with respect to a system under development. An architectural prototype is primarily a learning and communication vehicle used to explore and experiment with alternative architectural styles, features, and patterns in order to balance different architectural qualities. The use of architectural...... prototypes in the development process is discussed, and we argue that such prototypes can play a role throughout the entire process. The use of architectural prototypes is illustrated by three distinct cases of creating software systems. We argue that architectural prototyping can provide key insights...

  5. The effects of solution chemistry on the sticking efficiencies of viable Enterococcus faecalis: An atomic force microscopy and modeling study

    Science.gov (United States)

    Cail, Tracy L.; Hochella, Michael F.

    2005-06-01

    Atomic force microscopy (AFM) and Derjaguin-Landau-Verwey-Overbeek (DLVO) theory in combination with the interaction force boundary layer (IFBL) model have been used to empirically and theoretically calculate sticking efficiencies (α) of Enterococcus faecalis cells against a silica glass surface. Sticking efficiencies were calculated in solutions of varying pH and ionic strength and related to maximum distances of transport through a hypothetical soil block using colloid filtration theory. AFM measurements show that the repulsive and attractive forces between E. faecalis cells and a glass surface are a function of ionic strength but are less sensitive to changes in solution pH. Zeta (ζ)-potential measurements of the cells and glass surfaces correlate with these trends. Calculated DLVO energy profiles predict much greater sensitivity to changing solution chemistry. Sticking efficiencies derived from AFM measurements range from 9.6 × 10 -17 to 1 in solutions of low ionic strength (IS) and from 2.6 × 10 -33 to 1 at higher IS. Corresponding α values determined from DLVO theory are essentially zero in all tested solutions. Sticking efficiencies calculated in this study are smaller than values determined from column and field studies in similar systems; however, α derived from AFM data and the IFBL model more closely represent field data than do values calculated from DLVO energy values. A comparison with different methods of calculating α suggests that reversible adhesion may be significant in column-scale transport studies.

  6. The comparative analysis of model and prototype test results of Bulb turbine

    Science.gov (United States)

    Benišek, M.; Božić, I.; Ignjatović, B.

    2010-08-01

    This paper presents the problem of the hydropower plant oblique water inflow and its influence on the turbines operation. Oblique water inflow on the low head hydropower plant with bulb turbines influences turbine characteristics. The characteristics change occurs due to swirl incidence in the turbine inlet which spreads to the guide vanes inlet. Downstream, the flow conditions change is caused in the turbine runner in relation to the flow conditions without swirl inflow. Special attention is paid to the phenomenon of swirl flow incidence in the turbine conduit. With the aim of presenting and analyzing the oblique water inflow consequences on the hydropower plant operation, the existing turbine model tests results, performed in the laboratories, and the in situ prototype testing results have been used.

  7. Dynamic Characteristics of a Model and Prototype for 3D-RC Structure

    Directory of Open Access Journals (Sweden)

    Moniuddin Md. Khaja

    2016-06-01

    Full Text Available Infill walls provide durable and economical partitions that have relatively excellent thermal and sound insulation with high fire resistance. Monolithic infilled walls are provided within RC structures without being analyzed as a combination of concrete and brick elements, although in reality they act as a single unit during earthquakes. The performance of such structures during earthquakes has proved to be superior in comparison to bare frames in terms of stiffness, strength and energy dissipation. To know the dynamic characteristics of monolithic infill wall panels and masonry infill, modal, response spectrum and time history analyses have been carried out on a model and prototype of a 3D RC structure for a comparative study.

  8. Prototype Data Models and Data Dictionaries for Hanford Sediment Physical and Hydraulic Properties

    Energy Technology Data Exchange (ETDEWEB)

    Rockhold, Mark L.; Last, George V.; Middleton, Lisa A.

    2010-09-30

    The Remediation Decision Support (RDS) project, managed by the Pacific Northwest National Laboratory (PNNL) for the U.S. Department of Energy (DOE) and the CH2M HILL Plateau Remediation Company (CHPRC), has been compiling physical and hydraulic property data and parameters to support risk analyses and waste management decisions at Hanford. In FY09 the RDS project developed a strategic plan for a physical and hydraulic property database. This report documents prototype data models and dictionaries for these properties and associated parameters. Physical properties and hydraulic parameters and their distributions are required for any type of quantitative assessment of risk and uncertainty associated with predictions of contaminant transport and fate in the subsurface. The central plateau of the Hanford Site in southeastern Washington State contains most of the contamination at the Site and has up to {approx}100 m of unsaturated and unconsolidated or semi-consolidated sediments overlying the unconfined aquifer. These sediments contain a wide variety of contaminants ranging from organic compounds, such as carbon tetrachloride, to numerous radionuclides including technetium, plutonium, and uranium. Knowledge of the physical and hydraulic properties of the sediments and their distributions is critical for quantitative assessment of the transport of these contaminants in the subsurface, for evaluation of long-term risks and uncertainty associated with model predictions of contaminant transport and fate, and for evaluating, designing, and operating remediation alternatives. One of the goals of PNNL's RDS project is to work with the Hanford Environmental Data Manager (currently with CHPRC) to develop a protocol and schedule for incorporation of physical property and hydraulic parameter datasets currently maintained by PNNL into HEIS. This requires that the data first be reviewed to ensure quality and consistency. New data models must then be developed for HEIS that are

  9. Modeling and Analysis of Truck Mounted Concrete Pump Boom by Virtual Prototyping

    Directory of Open Access Journals (Sweden)

    Wu Ren

    2017-01-01

    Full Text Available By far there is lack of research on different working conditions between rigid and flexible dynamics of truck mounted concrete pump booms. First a 3D model has been established by using virtual prototyping technology of a 37 m long boom in Pro/Engineering software. Then the rigid body simulation model has been built. Next modal superimposition method is adopted to change the 4 rigid body booms into flexible ones. Kinematics law and dynamic characteristics of 4 common working conditions had been studied then. Next tip displacement and the first boom hydraulic cylinder force of the 4 working conditions between rigid and flexible models have been researched. Furthermore the first natural frequencies of the structure have been calculated. The results show that the frequency of the horizontal condition has the lowest of all and the roof condition has the largest of all. Besides the cylinder forces of the flexible model are larger than the corresponding rigid ones because of the flexible boom vibration. Finally an experiment has been done on a boom test rig which proved that the established simulation model is reasonable and the frequency results are correct. All of these provide design reference to mechanical manipulator as well as reducing product development cost of such mechanism.

  10. Instrumentation of the model in scaled 1:10 to prototype of the AquaBuOY wave energy converter

    DEFF Research Database (Denmark)

    Margheritini, Lucia; Frigaard, Peter

    The objective of this report is to provide guidelines for the instrumentation of a model in scale 1:10 to prototype of the AquaBuOY wave energy converter. The model will be located in Nissum Bredning area: this is an important waterway already used by Aalborg University for real sea tests of wave...... energy converters....

  11. Distributed ecohydrological modelling to evaluate irrigation system performance in Sirsa district, India II: Impact of viable water management scenarios

    Science.gov (United States)

    Singh, R.; Jhorar, R. K.; van Dam, J. C.; Feddes, R. A.

    2006-10-01

    SummaryThis study focuses on the identification of appropriate strategies to improve water management and productivity in an irrigated area of 4270 km 2 in India (Sirsa district). The field scale ecohydrological model SWAP in combination with field experiments, remote sensing and GIS has been applied in a distributed manner generating the required hydrological and biophysical variables to evaluate alternative water management scenarios at different spatial and temporal scales. Simulation results for the period 1991-2001 show that the water and salt limited crop production is 1.2-2.0 times higher than the actual recorded crop production. Improved crop husbandry in terms of improved crop varieties, timely sowing, better nutrient supply and more effective weed, pest and disease control, will increase crop yields and water productivity in Sirsa district. The scenario results further showed that reduction of seepage losses to 25-30% of the total canal inflow and reallocation of 15% canal water inflow from the northern to the central canal commands will improve significantly the long term water productivity, halt the rising and declining groundwater levels, and decrease the salinization in Sirsa district.

  12. Viable dark matter via radiative symmetry breaking in a scalar singlet Higgs portal extension of the standard model.

    Science.gov (United States)

    Steele, T G; Wang, Zhi-Wei; Contreras, D; Mann, R B

    2014-05-02

    We consider the generation of dark matter mass via radiative electroweak symmetry breaking in an extension of the conformal standard model containing a singlet scalar field with a Higgs portal interaction. Generating the mass from a sequential process of radiative electroweak symmetry breaking followed by a conventional Higgs mechanism can account for less than 35% of the cosmological dark matter abundance for dark matter mass M(s)>80 GeV. However, in a dynamical approach where both Higgs and scalar singlet masses are generated via radiative electroweak symmetry breaking, we obtain much higher levels of dark matter abundance. At one-loop level we find abundances of 10%-100% with 106 GeVdark matter mass. The dynamical approach also predicts a small scalar-singlet self-coupling, providing a natural explanation for the astrophysical observations that place upper bounds on dark matter self-interaction. The predictions in all three approaches are within the M(s)>80 GeV detection region of the next generation XENON experiment.

  13. Prototyping Practice

    DEFF Research Database (Denmark)

    Ramsgaard Thomsen, Mette; Tamke, Martin

    2015-01-01

    This paper examines the role of the prototyping in digital architecture. During the past decade, a new research field has emerged exploring the digital technology’s impact on the way we think, design and build our environment. In this practice the prototype, the pavilion, installation...... or demonstrator, has become a shared research tool. This paper asks how this practice has formed by tracing the different roles of the prototype from ideation and design, to analysis and evaluation. Taking point of departure in CITA’s own prototyping practice, we explore the relationships between physical...... and digital prototyping as a particular means of validation and verification. Here, a breadth of physical prototypes take on varying roles, in turn informing, testing and proving the research enquiry. The paper addresses how we can differentiate between these modes of prototyping and how....

  14. Assimilation of satellite altimetry data in hydrological models for improved inland surface water information: Case studies from the "Sentinel-3 Hydrologic Altimetry Processor prototypE" project (SHAPE)

    Science.gov (United States)

    Gustafsson, David; Pimentel, Rafael; Fabry, Pierre; Bercher, Nicolas; Roca, Mónica; Garcia-Mondejar, Albert; Fernandes, Joana; Lázaro, Clara; Ambrózio, Américo; Restano, Marco; Benveniste, Jérôme

    2017-04-01

    This communication is about the Sentinel-3 Hydrologic Altimetry Processor prototypE (SHAPE) project, with a focus on the components dealing with assimilation of satellite altimetry data into hydrological models. The SHAPE research and development project started in September 2015, within the Scientific Exploitation of Operational Missions (SEOM) programme of the European Space Agency. The objectives of the project are to further develop and assess recent improvement in altimetry data, processing algorithms and methods for assimilation in hydrological models, with the overarching goal to support improved scientific use of altimetry data and improved inland water information. The objective is also to take scientific steps towards a future Inland Water dedicated processor on the Sentinel-3 ground segment. The study focuses on three main variables of interest in hydrology: river stage, river discharge and lake level. The improved altimetry data from the project is used to estimate river stage, river discharge and lake level information in a data assimilation framework using the hydrological dynamic and semi-distributed model HYPE (Hydrological Predictions for the Environment). This model has been developed by SMHI and includes data assimilation module based on the Ensemble Kalman filter method. The method will be developed and assessed for a number of case studies with available in situ reference data and satellite altimetry data based on mainly the CryoSat-2 mission on which the new processor will be run; Results will be presented from case studies on the Amazon and Danube rivers and Lake Vänern (Sweden). The production of alti-hydro products (water level time series) are improved thanks to the use of water masks. This eases the geo-selection of the CryoSat-2 altimetric measurements since there are acquired from a geodetic orbit and are thus spread along the river course in space and and time. The specific processing of data from this geodetic orbit space

  15. The performance evaluation test for prototype model of Longwave Infrared Imager (LIR) onboard PLANET-C

    Science.gov (United States)

    Fukuhara, Tetsuya; Taguchi, Makoto; Imamura, Takeshi

    The PLANET-C mission, which is one of the future planetary missions of Japan, aims at understanding the atmospheric circulation of Venus. Meteorological information will be obtained by globally mapping clouds and minor constituents successively with four imagers at ultraviolet and infrared wavelengths, and radio occultation experiments will provide vertical profiles of the atmospheric temperature. These systematic, continuous remote observations will provide us with an unprecedented large data set of the Venusian atmospheric dynamics. The Longwave Infrared Imager (LIR), which mounts a commercial uncooled micro-bolometer array (UMBA), is one of four imagers onboard the spacecraft and detects thermal emission from the top of the sulfur dioxide cloud in a rather wide wavelength region of 8-12 µm to map the cloud-top temperature which is typically as low as 230 K. Unlike other imagers, LIR is able to take images of both dayside and nightside with equal quality and accuracy. The cloud-top temperature map will reflect the cloud height distribution in which a few hundred meters of difference in cloud height corresponds to temperature difference of 0.3 K. In order to detect the cloud height difference of a few hundred meters, LIR requires a noise equivalent temperature difference (NETD) of 0.3 K. The commercial UMBA camera is typically used for observing room-temperature targets, and thus the electronics and the driving parameters have been optimized for low temperature-targets. Images of blackbody targets in room temperature (˜300 K) and low temperature (˜230 K) have been acquired in a vacuum environment using a prototype model of LIR, showing that the NETD of 0.2 K and 0.8 K are achieved in room temperature and low temperature, respectively. Although the NETD at the low temperature is 4 times worse than the case for the room temperature, we expect that the requirement of N ET D < 0.3 K for a low-temperature target will be achieved by averaging several tens of images

  16. Blood quantum and perceptions of black-white biracial targets: the black ancestry prototype model of affirmative action.

    Science.gov (United States)

    Sanchez, Diana T; Good, Jessica J; Chavez, George

    2011-01-01

    The present study examined the causal role of amount of Black ancestry in targets' perceived fit with Black prototypes and perceivers' categorization of biracial targets. Greater Black ancestry increased the likelihood that perceivers categorized biracial targets as Black and perceived targets as fitting Black prototypes (e.g., experiencing racial discrimination, possessing stereotypic traits). These results persisted, controlling for perceptions of phenotype that stem from ancestry information. Perceivers' beliefs about how society would categorize the biracial targets predicted perceptions of discrimination, whereas perceivers' beliefs about the targets' self-categorization predicted trait perceptions. The results of this study support the Black ancestry prototype model of affirmative action, which reveals the downstream consequences of Black ancestry for the distribution of minority resources (e.g., affirmative action) to biracial targets.

  17. Differentiation and Exploration of Model MACP for HE VER 1.0 on Prototype Performance Measurement Application for Higher Education

    Directory of Open Access Journals (Sweden)

    Akbar R. Reza El

    2018-01-01

    Full Text Available Model MACP for HE ver.1. Is a model that describes how to perform measurement and monitoring performance for Higher Education. Based on a review of the research related to the model, there are several parts of the model component to develop in further research, so this research has four main objectives. The first objective is to differentiate the CSF (critical success factor components in the previous model, the two key KPI (key performance indicators exploration in the previous model, the three based on the previous objective, the new and more detailed model design. The final goal is the fourth designed prototype application for performance measurement in higher education, based on a new model created. The method used is explorative research method and application design using prototype method. The results of this study are first, forming a more detailed new model for measurement and monitoring of performance in higher education, differentiation and exploration of the Model MACP for HE Ver.1. The second result compiles a dictionary of college performance measurement by re-evaluating the existing indicators. The third result is the design of prototype application of performance measurement in higher education.

  18. Solution Prototype

    DEFF Research Database (Denmark)

    Efeoglu, Arkin; Møller, Charles; Serie, Michel

    2013-01-01

    This paper outlines an artifact building and evaluation proposal. Design Science Research (DSR) studies usually consider encapsulated artifact that have relationships with other artifacts. The solution prototype as a composed artifact demands for a more comprehensive consideration in its systematic...... environment. The solution prototype that is composed from blending product and service prototype has particular impacts on the dualism of DSR’s “Build” and “Evaluate”. Since the mix between product and service prototyping can be varied, there is a demand for a more agile and iterative framework. Van de Ven...

  19. Prototyping Revisited

    DEFF Research Database (Denmark)

    Hansen, Poul H. Kyvsgård; Hansen, Svend Aage; Hansen, Erik

    2006-01-01

    Until now, prototyping has been developing as a technological discipline. In so it has proven to be a strong means to test specific solutions or physical designs before the launch of a product. The results have been reduced development time and improvement of quality in a broad sense. There are......, however, indications that we should review our perception of prototypes to be broader and to view our application of prototypes in a broader organizational view. This paper presents an initial and explorative review of the changing role of prototypes in product development....

  20. Biomimetic Multispiked Connecting Ti-Alloy Scaffold Prototype for Entirely-Cementless Resurfacing Arthroplasty Endoprostheses—Exemplary Results of Implantation of the Ca-P Surface-Modified Scaffold Prototypes in Animal Model and Osteoblast Culture Evaluation

    Directory of Open Access Journals (Sweden)

    Ryszard Uklejewski

    2016-06-01

    Full Text Available We present here—designed, manufactured, and tested by our research team—the Ti-alloy prototype of the multispiked connecting scaffold (MSC-Scaffold interfacing the components of resurfacing arthroplasty (RA endoprostheses with bone. The spikes of the MSC-Scaffold prototype mimic the interdigitations of the articular subchondral bone, which is the natural biostructure interfacing the articular cartilage with the periarticular trabecular bone. To enhance the osteoinduction/osteointegration potential of the MSC-Scaffold, the attempts to modify its bone contacting surfaces by the process of electrochemical cathodic deposition of Ca-P was performed with further immersion of the MSC-Scaffold prototypes in SBF in order to transform the amorphous calcium-phosphate coating in hydroxyapatite-like (HA-like coating. The pilot experimental study of biointegration of unmodified and Ca-P surface-modified MSC-Scaffold prototypes was conducted in an animal model (swine and in osteoblast cell culture. On the basis of a microscope-histological method the biointegration was proven by the presence of trabeculae in the interspike spaces of the MSC-Scaffold prototype on longitudinal and cross-sections of bone-implant specimens. The percentage of trabeculae in the area between the spikes of specimen containing Ca-P surface modified scaffold prototype observed in microCT reconstructions of the explanted joints was visibly higher than in the case of unmodified MSC-Scaffold prototypes. Significantly higher Alkaline Phosphatase (ALP activity and the cellular proliferation in the case of Ca-P-modified MSC-Scaffold pre-prototypes, in comparison with unmodified pre-prototypes, was found in osteoblast cell cultures. The obtained results of experimental implantation in an animal model and osteoblast cell culture evaluations of Ca-P surface-modified and non-modified biomimetic MSC-Scaffold prototypes for biomimetic entirely-cementless RA endoprostheses indicate the

  1. Biomimetic Multispiked Connecting Ti-Alloy Scaffold Prototype for Entirely-Cementless Resurfacing Arthroplasty Endoprostheses-Exemplary Results of Implantation of the Ca-P Surface-Modified Scaffold Prototypes in Animal Model and Osteoblast Culture Evaluation.

    Science.gov (United States)

    Uklejewski, Ryszard; Rogala, Piotr; Winiecki, Mariusz; Tokłowicz, Renata; Ruszkowski, Piotr; Wołuń-Cholewa, Maria

    2016-06-29

    We present here-designed, manufactured, and tested by our research team-the Ti-alloy prototype of the multispiked connecting scaffold (MSC-Scaffold) interfacing the components of resurfacing arthroplasty (RA) endoprostheses with bone. The spikes of the MSC-Scaffold prototype mimic the interdigitations of the articular subchondral bone, which is the natural biostructure interfacing the articular cartilage with the periarticular trabecular bone. To enhance the osteoinduction/osteointegration potential of the MSC-Scaffold, the attempts to modify its bone contacting surfaces by the process of electrochemical cathodic deposition of Ca-P was performed with further immersion of the MSC-Scaffold prototypes in SBF in order to transform the amorphous calcium-phosphate coating in hydroxyapatite-like (HA-like) coating. The pilot experimental study of biointegration of unmodified and Ca-P surface-modified MSC-Scaffold prototypes was conducted in an animal model (swine) and in osteoblast cell culture. On the basis of a microscope-histological method the biointegration was proven by the presence of trabeculae in the interspike spaces of the MSC-Scaffold prototype on longitudinal and cross-sections of bone-implant specimens. The percentage of trabeculae in the area between the spikes of specimen containing Ca-P surface modified scaffold prototype observed in microCT reconstructions of the explanted joints was visibly higher than in the case of unmodified MSC-Scaffold prototypes. Significantly higher Alkaline Phosphatase (ALP) activity and the cellular proliferation in the case of Ca-P-modified MSC-Scaffold pre-prototypes, in comparison with unmodified pre-prototypes, was found in osteoblast cell cultures. The obtained results of experimental implantation in an animal model and osteoblast cell culture evaluations of Ca-P surface-modified and non-modified biomimetic MSC-Scaffold prototypes for biomimetic entirely-cementless RA endoprostheses indicate the enhancement of the

  2. Biomimetic Multispiked Connecting Ti-Alloy Scaffold Prototype for Entirely-Cementless Resurfacing Arthroplasty Endoprostheses—Exemplary Results of Implantation of the Ca-P Surface-Modified Scaffold Prototypes in Animal Model and Osteoblast Culture Evaluation

    Science.gov (United States)

    Uklejewski, Ryszard; Rogala, Piotr; Winiecki, Mariusz; Tokłowicz, Renata; Ruszkowski, Piotr; Wołuń-Cholewa, Maria

    2016-01-01

    We present here—designed, manufactured, and tested by our research team—the Ti-alloy prototype of the multispiked connecting scaffold (MSC-Scaffold) interfacing the components of resurfacing arthroplasty (RA) endoprostheses with bone. The spikes of the MSC-Scaffold prototype mimic the interdigitations of the articular subchondral bone, which is the natural biostructure interfacing the articular cartilage with the periarticular trabecular bone. To enhance the osteoinduction/osteointegration potential of the MSC-Scaffold, the attempts to modify its bone contacting surfaces by the process of electrochemical cathodic deposition of Ca-P was performed with further immersion of the MSC-Scaffold prototypes in SBF in order to transform the amorphous calcium-phosphate coating in hydroxyapatite-like (HA-like) coating. The pilot experimental study of biointegration of unmodified and Ca-P surface-modified MSC-Scaffold prototypes was conducted in an animal model (swine) and in osteoblast cell culture. On the basis of a microscope-histological method the biointegration was proven by the presence of trabeculae in the interspike spaces of the MSC-Scaffold prototype on longitudinal and cross-sections of bone-implant specimens. The percentage of trabeculae in the area between the spikes of specimen containing Ca-P surface modified scaffold prototype observed in microCT reconstructions of the explanted joints was visibly higher than in the case of unmodified MSC-Scaffold prototypes. Significantly higher Alkaline Phosphatase (ALP) activity and the cellular proliferation in the case of Ca-P-modified MSC-Scaffold pre-prototypes, in comparison with unmodified pre-prototypes, was found in osteoblast cell cultures. The obtained results of experimental implantation in an animal model and osteoblast cell culture evaluations of Ca-P surface-modified and non-modified biomimetic MSC-Scaffold prototypes for biomimetic entirely-cementless RA endoprostheses indicate the enhancement of the

  3. Model-Based Fault Detection and Diagnosis System for NASA Mars Subsurface Drill Prototype

    Data.gov (United States)

    National Aeronautics and Space Administration — The Drilling Automation for Mars Environment (DAME) project, led by NASA Ames Research Center, is aimed at developing a lightweight, low-power drill prototype that...

  4. Accuracy of printed dental models made with 2 prototype technologies and different designs of model bases.

    Science.gov (United States)

    Camardella, Leonardo Tavares; de Vasconcellos Vilella, Oswaldo; Breuning, Hero

    2017-06-01

    The aim of this study was to compare the accuracy of printed models from intraoral scans with different designs of model bases, using 2 types of 3-dimensional printing techniques. Three types of model base design were created: regular base, horseshoe-shaped base, and horseshoe-shaped base with a bar connecting the posterior region. The digital models were printed with the 3-dimensional printers using different techniques: stereolithography and triple jetting technology (polyjet). The printed models were then scanned with a computed tomography scanner and a desktop laser scanner to create the respective digital models. Evaluation of the accuracy was done by measuring the dentitions with Ortho Analyzer software (3Shape, Copenhagen, Denmark) and by model superimposition with Geomagic Qualify software (3D Systems, Rock Hill, SC). An observer measured the distances twice, with an interval of 2 weeks. The accuracy of the printed models was statistically evaluated by the mixed-effects regression model approach. The results showed that printed models made by the polyjet printer were accurate, regardless of the design of the model base. Printed models made with the stereolithography technique with the regular model base and the horseshoe-shaped base with a bar were accurate, but the transversal distances measured on the printed models with a horseshoe-shaped base were statistically significantly smaller. Printed models with a regular base or a horseshoe-shaped base with a bar were accurate regardless of the printing technique used. Printed models with a horseshoe-shaped base made with the stereolithography printer had a statistically significant reduction in the transversal dimension that was not found in the models printed with the polyjet technique. Copyright © 2017 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

  5. Heuristic model of education and a prototype of a system for remote siren activation in emergency

    Directory of Open Access Journals (Sweden)

    Paun Josif Bereš

    2013-02-01

    Full Text Available A heuristic models of methodical innovation with special emphasis on training of team members to work in emergency situations, where each team member must be aware of the importance of their work, must know and apply a methodology for finding the best solutions and feel satisfaction with the results as an individual and as a part of that team, are proposed in this paper. Heuristic approach to the problems of teaching in emergency situations should allow team members to come up with the creative process of acquiring knowledge, to learn to think and develop skills for education. It is, therefore, such an approach that is not based on passive observation of phenomena and impersonation performed by a teacher, but establishes an active relationship to phenomena of thought and introduces the team members in their own research of the heuristic concept problems with the range of solutions - in this case, " Digital Communications - a program of operational functions of mobile phones ", the function of emergency situations, the example of a prototype system for automatic activation of the alert - sirens.

  6. Assessment of Mechanical Performance of Bone Architecture Using Rapid Prototyping Models

    Science.gov (United States)

    Saparin, Peter; Woesz, Alexander; Thomsen, Jasper S.; Fratzl, Peter

    2008-06-01

    The aim of this on-going research project is to assess the influence of bone microarchitecture on the mechanical performance of trabecular bone. A testing chain consist-ing of three steps was established: 1) micro computed tomography (μCT) imaging of human trabecular bone; 2) building of models of the bone from a light-sensitive polymer using Rapid Prototyping (RP); 3) mechanical testing of the models in a material testing machine. A direct resampling procedure was developed to convert μCT data into the format of the RP machine. Standardized parameters for production and testing of the plastic models were established by use of regular cellular structures. Next, normal, osteoporotic, and extreme osteoporotic vertebral trabecular bone architectures were re-produced by RP and compression tested. We found that normal architecture of vertebral trabecular bone exhibit behaviour characteristic of a cellular structure. In normal bone the fracture occurs at much higher strain values that in osteoporotic bone. After the fracture a normal trabecular architecture is able to carry much higher loads than an osteoporotic architecture. However, no statistically significant differences were found in maximal stress during uniaxial compression of the central part of normal, osteoporotic, and extreme osteoporotic vertebral trabecular bone. This supports the hypothesis that osteoporotic trabecular bone can compensate for a loss of trabeculae by thickening the remaining trabeculae in the loading direction (compensatory hypertrophy). The developed approach could be used for mechanical evaluation of structural data acquired non-invasively and assessment of changes in performance of bone architecture.

  7. A validation study of reconstructed rapid prototyping models produced by two technologies.

    Science.gov (United States)

    Dietrich, Christian Andreas; Ender, Andreas; Baumgartner, Stefan; Mehl, Albert

    2017-09-01

    To determine the accuracy (trueness and precision) of two different rapid prototyping (RP) techniques for the physical reproduction of three-dimensional (3D) digital orthodontic study casts, a comparative assessment using two 3D STL files of two different maxillary dentitions (two cases) as a reference was accomplished. Five RP replicas per case were fabricated using both stereolithography (SLA) and the PolyJet system. The 20 reproduced casts were digitized with a highly accurate reference scanner, and surface superimpositions were performed. Precision was measured by superimposing the digitized replicas within each case with themselves. Superimposing the digitized replicas with the corresponding STL reference files assessed trueness. Statistical significance between the two tested RP procedures was evaluated with independent-sample t-tests (P < .05). The SLA and PolyJet replicas showed statistically significant differences for trueness and precision. The precision of both tested RP systems was high, with mean deviations in stereolithographic models of 23 (±6) μm and in PolyJet replicas of 46 (±13) μm. The mean deviation for trueness in stereolithographic replicas was 109 (±4) μm, while in PolyJet replicas, it was 66 (±14) μm. Comparing the STL reference files, the PolyJet replicas showed higher trueness than the SLA models. But the precision measurements favored the SLA technique. The dimensional errors observed in this study were a maximum of 127 μm. In the present study, both types of reproduced digital orthodontic models are suitable for diagnostics and treatment planning.

  8. Unspoken Playground Rules Discourage Adolescent Physical Activity in School: A Focus Group Study of Constructs in the Prototype Willingness Model.

    Science.gov (United States)

    Wheatley, Catherine M; Davies, Emma L; Dawes, Helen

    2018-03-01

    The health benefits of exercise in school are recognized, yet physical activity continues to decline during early adolescence despite numerous interventions. In this study, we investigated whether the prototype willingness model, an account of adolescent decision making that includes both reasoned behavioral choices and unplanned responses to social environments, might improve understanding of physical activity in school. We conducted focus groups with British pupils aged 12 to 13 years and used deductive thematic analysis to search for themes relating to the model. Participants described reasoned decisions about physical activity outside school and unplanned choices to be inactive during break, in response to social contexts described as more "judgmental" than in primary school. Social contexts appeared characterized by anxiety about competence, negative peer evaluation, and inactive playground norms. The prototype willingness model might more fully explain physical activity in school than reasoned behavioral models alone, indicating potential for interventions targeting anxieties about playground social environments.

  9. Rapid Prototyping of Mobile Learning Games

    Science.gov (United States)

    Federley, Maija; Sorsa, Timo; Paavilainen, Janne; Boissonnier, Kimo; Seisto, Anu

    2014-01-01

    This position paper presents the first results of an on-going project, in which we explore rapid prototyping method to efficiently produce digital learning solutions that are commercially viable. In this first phase, rapid game prototyping and an iterative approach was tested as a quick and efficient way to create learning games and to evaluate…

  10. Clinical Informatics Fellowship Programs: In Search of a Viable Financial Model: An open letter to the Centers for Medicare and Medicaid Services.

    Science.gov (United States)

    Lehmann, C U; Longhurst, C A; Hersh, W; Mohan, V; Levy, B P; Embi, P J; Finnell, J T; Turner, A M; Martin, R; Williamson, J; Munger, B

    2015-01-01

    In the US, the new subspecialty of Clinical Informatics focuses on systems-level improvements in care delivery through the use of health information technology (HIT), data analytics, clinical decision support, data visualization and related tools. Clinical informatics is one of the first subspecialties in medicine open to physicians trained in any primary specialty. Clinical Informatics benefits patients and payers such as Medicare and Medicaid through its potential to reduce errors, increase safety, reduce costs, and improve care coordination and efficiency. Even though Clinical Informatics benefits patients and payers, because GME funding from the Centers for Medicare and Medicaid Services (CMS) has not grown at the same rate as training programs, the majority of the cost of training new Clinical Informaticians is currently paid by academic health science centers, which is unsustainable. To maintain the value of HIT investments by the government and health care organizations, we must train sufficient leaders in Clinical Informatics. In the best interest of patients, payers, and the US society, it is therefore critical to find viable financial models for Clinical Informatics fellowship programs. To support the development of adequate training programs in Clinical Informatics, we request that the Centers for Medicare and Medicaid Services (CMS) issue clarifying guidance that would allow accredited ACGME institutions to bill for clinical services delivered by fellows at the fellowship program site within their primary specialty.

  11. A review of the issues surrounding three-dimensional computed tomography for medical modelling using rapid prototyping techniques

    Energy Technology Data Exchange (ETDEWEB)

    Bibb, Richard [Department of Design and Technology, Loughborough University, Ashby Road, Loughborough, Leicestershire LE11 3TU (United Kingdom)], E-mail: r.j.bibb@lboro.ac.uk; Winder, John [Health and Rehabilitation Sciences Research Institute, University of Ulster, Shore Road, Newtownabbey, BT37 0QB (United Kingdom)], E-mail: rj.winder@ulster.ac.uk

    2010-02-15

    This technical note aims to raise awareness amongst radiographers of the application of Computed Tomography data in the production of models using Rapid Prototyping technologies. It also aims to provide radiographers with recommendations that will assist them in providing three-dimensional Computed Tomography data that can fulfil the requirements of medical modelling. Potential problem areas in data acquisition and transfer are discussed and suggestions are given for methods that aim to avoid these.

  12. Prototyping an online wetland ecosystem services model using open model sharing standards

    Science.gov (United States)

    Feng, M.; Liu, S.; Euliss, N.H.; Young, Caitlin; Mushet, D.M.

    2011-01-01

    Great interest currently exists for developing ecosystem models to forecast how ecosystem services may change under alternative land use and climate futures. Ecosystem services are diverse and include supporting services or functions (e.g., primary production, nutrient cycling), provisioning services (e.g., wildlife, groundwater), regulating services (e.g., water purification, floodwater retention), and even cultural services (e.g., ecotourism, cultural heritage). Hence, the knowledge base necessary to quantify ecosystem services is broad and derived from many diverse scientific disciplines. Building the required interdisciplinary models is especially challenging as modelers from different locations and times may develop the disciplinary models needed for ecosystem simulations, and these models must be identified and made accessible to the interdisciplinary simulation. Additional difficulties include inconsistent data structures, formats, and metadata required by geospatial models as well as limitations on computing, storage, and connectivity. Traditional standalone and closed network systems cannot fully support sharing and integrating interdisciplinary geospatial models from variant sources. To address this need, we developed an approach to openly share and access geospatial computational models using distributed Geographic Information System (GIS) techniques and open geospatial standards. We included a means to share computational models compliant with Open Geospatial Consortium (OGC) Web Processing Services (WPS) standard to ensure modelers have an efficient and simplified means to publish new models. To demonstrate our approach, we developed five disciplinary models that can be integrated and shared to simulate a few of the ecosystem services (e.g., water storage, waterfowl breeding) that are provided by wetlands in the Prairie Pothole Region (PPR) of North America.

  13. Predictive models for the effect of storage temperature on Vibrio parahaemolyticus viability and counts of total viable bacteria in Pacific oysters (Crassostrea gigas).

    Science.gov (United States)

    Fernandez-Piquer, Judith; Bowman, John P; Ross, Tom; Tamplin, Mark L

    2011-12-01

    Vibrio parahaemolyticus is an indigenous bacterium of marine environments. It accumulates in oysters and may reach levels that cause human illness when postharvest temperatures are not properly controlled and oysters are consumed raw or undercooked. Predictive models were produced by injecting Pacific oysters (Crassostrea gigas) with a cocktail of V. parahaemolyticus strains, measuring viability rates at storage temperatures from 3.6 to 30.4°C, and fitting the data to a model to obtain parameter estimates. The models were evaluated with Pacific and Sydney Rock oysters (Saccostrea glomerata) containing natural populations of V. parahaemolyticus. V. parahaemolyticus viability was measured by direct plating samples on thiosulfate-citrate-bile salts-sucrose (TCBS) agar for injected oysters and by most probable number (MPN)-PCR for oysters containing natural populations. In parallel, total viable bacterial counts (TVC) were measured by direct plating on marine agar. Growth/inactivation rates for V. parahaemolyticus were -0.006, -0.004, -0.005, -0.003, 0.030, 0.075, 0.095, and 0.282 log₁₀ CFU/h at 3.6, 6.2, 9.6, 12.6, 18.4, 20.0, 25.7, and 30.4°C, respectively. The growth rates for TVC were 0.015, 0.023, 0.016, 0.048, 0.055, 0.071, 0.133, and 0.135 log₁₀ CFU/h at 3.6, 6.2, 9.3, 14.9, 18.4, 20.0, 25.7, and 30.4°C, respectively. Square root and Arrhenius-type secondary models were generated for V. parahaemolyticus growth and inactivation kinetic data, respectively. A square root model was produced for TVC growth. Evaluation studies showed that predictive growth for V. parahaemolyticus and TVC were "fail safe." The models can assist oyster companies and regulators in implementing management strategies to minimize V. parahaemolyticus risk and enhancing product quality in supply chains.

  14. Kaiser Permanente/Sandia National health care model. Phase I prototype final report. Part 1 - model overview

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, D.; Yoshimura, A.; Butler, D.; Judson, R. [and others

    1996-11-01

    This report describes the results of a Cooperative Research and Development Agreement between Sandia National Laboratories and Kaiser Permanente Southern California to develop a prototype computer model of Kaiser Permanente`s health care delivery system. As a discrete event simulation, SimHCO models for each of 100,000 patients the progression of disease, individual resource usage, and patient choices in a competitive environment. SimHCO is implemented in the object-oriented programming language C++, stressing reusable knowledge and reusable software components. The versioned implementation of SimHCO showed that the object-oriented framework allows the program to grow in complexity in an incremental way. Furthermore, timing calculations showed that SimHCO runs in a reasonable time on typical workstations, and that a second phase model will scale proportionally and run within the system constraints of contemporary computer technology. This report is published as two documents: Model Overview and Domain Analysis. A separate Kaiser-proprietary report contains the Disease and Health Care Organization Selection Models.

  15. Unikabeton Prototype

    DEFF Research Database (Denmark)

    Søndergaard, Asbjørn; Dombernowsky, Per

    2011-01-01

    The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project was elabor......The Unikabeton prototype structure was developed as the finalization of the cross-disciplinary research project Unikabeton, exploring the architectural potential in linking the computational process of topology optimisation with robot fabrication of concrete casting moulds. The project...... of Architecture was to develop a series of optimisation experiments, concluding in the design and optimisation of a full scale prototype concrete structure....

  16. Theoretical Modeling and Experimental Investigation of the Thermal Performance of the LHC Prototype Lattice Cryostats

    CERN Document Server

    Riddone, G

    1997-01-01

    This thesis presents the thermal performance of the LHC (Large Hadron Collider) prototype cryostats both in steady-state and in transient conditions. LHC will be built in the 27 km LEP tunnel and will provide proton-proton collisions. It will make use of superconducting magnets operating in static bath of superfluid helium at 1.9 K. The thesis is mainly divided in three parts. The first part cont ains three chapters which present a brief overview of the LHC project. Part 1-Chapter 1 gives a short introduction to the LHC design layout and performance. Part 1-Chapter 2 refers to LHC cryogenic s ystem and describes the general architecture of the cryogenic plants, the temperature levels and the heat loads. The 50 m long LHC prototype half-cell contains one twin-bore quadrupole and four twin-a perture dipoles. In Part 1-Chapter 3 the design and construction of the prototype dipole and quadrupole cryostats are presented. The LHC prototype cryostats have integrated cryogenic lines, while the final LHC cryostats hav...

  17. A novel integrated renewable energy system modelling approach, allowing fast FPGA controller prototyping

    DEFF Research Database (Denmark)

    Teodorescu, Remus; Ruiz, Alberto Parera; Cirstea, Marcian

    2008-01-01

    of a photovoltaic energy system and a wind power system, which would allow an optimized holistic digital control system design, followed by rapid prototyping of the controller into a single Field Programmable Gate Array (FPGA). Initially, the system was simulated using Matlab / Simulink, to create a reference...... containing a Xilinx Spartan II FPGA and was successfully experimentally tested. This approach enables the design and fast hardware implementation of efficient controllers for Distributed Energy Resource (DER) hybrid systems....

  18. A Prototype Educational Model for Hepatobiliary Interventions: Unveiling the Role of Graphic Designers in Medical 3D Printing.

    Science.gov (United States)

    Javan, Ramin; Zeman, Merissa N

    2018-02-01

    In the context of medical three-dimensional (3D) printing, in addition to 3D reconstruction from cross-sectional imaging, graphic design plays a role in developing and/or enhancing 3D-printed models. A custom prototype modular 3D model of the liver was graphically designed depicting segmental anatomy of the parenchyma containing color-coded hepatic vasculature and biliary tree. Subsequently, 3D printing was performed using transparent resin for the surface of the liver and polyamide material to develop hollow internal structures that allow for passage of catheters and wires. A number of concepts were incorporated into the model. A representative mass with surrounding feeding arterial supply was embedded to demonstrate tumor embolization. A straight narrow hollow tract connecting the mass to the surface of the liver, displaying the path of a biopsy device's needle, and the concept of needle "throw" length was designed. A connection between the middle hepatic and right portal veins was created to demonstrate transjugular intrahepatic portosystemic shunt (TIPS) placement. A hollow amorphous structure representing an abscess was created to allow the demonstration of drainage catheter placement with the formation of pigtail tip. Percutaneous biliary drain and cholecystostomy tube placement were also represented. The skills of graphic designers may be utilized in creating highly customized 3D-printed models. A model was developed for the demonstration and simulation of multiple hepatobiliary interventions, for training purposes, patient counseling and consenting, and as a prototype for future development of a functioning interventional phantom.

  19. Further characterization of the prototypical nociceptin/orphanin FQ peptide receptor agonist Ro 64-6198 in rodent models of conflict anxiety and despair.

    Science.gov (United States)

    Goeldner, Celia; Spooren, Will; Wichmann, Jürgen; Prinssen, Eric P

    2012-07-01

    Ro 64-6198, the prototypical non-peptide nociceptin/orphanin FQ peptide (NOP) receptor agonist, has potent anxiolytic-like effects in several preclinical models and species. However the effects of Ro 64-6198 on distinctive anxiety-provoking conditions related to unconditioned conflict behavior as well as its role in despair-like behavior remain to be addressed. Here we examined the effects of Ro 64-6198 on unconditioned conflict anxiety using stimuli with different salience and on regulation of autonomic reactivity and compared these to the effects of benzodiazepine receptor agonists. We also addressed the potential effects of Ro 64-6198 on despair-like behavior. Ro 64-6198 (0.1 to 10 mg/kg i.p.) and either diazepam or chlordiazepoxide were tested in the Vogel conflict punished drinking test (VCT) in Sprague Dawley rats, in the social approach-avoidance (SAA) test in Lewis rats, in the novelty-induced hypophagia (NIH) in C57BL/6J mice, and in stress-induced hyperthermia in NMRI mice, as well as in the forced swim test (FST) in Sprague Dawley rats and the tail suspension test (TST) in C57BL/6J mice. Ro 64-6198 (0.3 to 3 mg/kg) dose-dependently produced anxiolytic-like effects in the VCT, SAA, NIH, and SIH, similar to benzodiazepine receptor agonists. Ro 64-6198 did not alter immobility time in the FST and TST. Ro 64-6198 produced marked anxiolytic-like effects in response to a variety of mild to strong anxiogenic stimuli, whereas it did not facilitate depression-related behaviors. This data extend previous literature suggesting that NOP receptors are a viable target for the treatment of anxiety disorders.

  20. Universal Quantum Computing:. Third Gen Prototyping Utilizing Relativistic `Trivector' R-Qubit Modeling Surmounting Uncertainty

    Science.gov (United States)

    Amoroso, Richard L.; Kauffman, Louis H.; Giandinoto, Salvatore

    2013-09-01

    We postulate bulk universal quantum computing (QC) cannot be achieved without surmounting the quantum uncertainty principle, an inherent barrier by empirical definition in the regime described by the Copenhagen interpretation of quantum theory - the last remaining hurdle to bulk QC. To surmount uncertainty with probability 1, we redefine the basis for the qubit utilizing a unique form of M-Theoretic Calabi-Yau mirror symmetry cast in an LSXD Dirac covariant polarized vacuum with an inherent `Feynman synchronization backbone'. This also incorporates a relativistic qubit (r-qubit) providing additional degrees of freedom beyond the traditional Block 2-sphere qubit bringing the r-qubit into correspondence with our version of Relativistic Topological Quantum Field Theory (RTQFT). We present a 3rd generation prototype design for simplifying bulk QC implementation.

  1. Application of expert system technology to nondestructive waste assay - initial prototype model

    Energy Technology Data Exchange (ETDEWEB)

    Becker, G.K.; Determan, J.C. [Idaho National Engineering and Environmental Lab., Idaho Falls, ID (United States)

    1997-11-01

    Expert system technology has been identified as a technique useful for filling certain types of technology/capability gaps in existing waste nondestructive assay (NDA) applications. In particular, expert system techniques are being investigated with the intent of providing on-line evaluation of acquired data and/or directed acquisition of data in a manner that mimics the logic and decision making process a waste NDA expert would employ. The space from which information and data sources utilized in this process is much expanded with respect to the algorithmic approach typically utilized in waste NDA. Expert system technology provides a mechanism to manage and reason with this expanded information/data set. The material presented in this paper concerns initial studies and a resultant prototype expert system that incorporates pertinent information, and evaluation logic and decision processes, for the purpose of validating acquired waste NDA measurement assays. 6 refs., 6 figs.

  2. Model measurement based identification of Francis turbine vortex rope parameters for prototype part load pressure and power pulsation prediction

    Science.gov (United States)

    Manderla, M.; Weber, W.; Koutnik, J.

    2016-11-01

    Pressure and power fluctuations of hydro-electric power plants in part-load operation are an important measure for the quality of the power which is delivered to the electrical grid. It is well known that the unsteadiness is driven by the flow patterns in the draft tube where a vortex rope is present. However, until today the equivalent vortex rope parameters for common numerical 1D-models are a major source of uncertainty. In this work, a new optimization-based grey box method for experimental vortex rope modelling and parameter identification is presented. The combination of analytical vortex rope and test rig modelling and the usage of dynamic measurements allow the identification of the unknown vortex rope parameters. Upscaling from model to prototype size is achieved via existing nondimensional parameters. In this work, a new experimental setup and system identification method is proposed which are suitable for the determination of the full set of part load vortex rope parameters in the lab. For the vortex rope, a symmetric model with cavity compliance, bulk viscosity and two pressure excitation sources is developed and implemented which shows the best correspondence with available measurement data. Due to the non-dimensional parameter definition, scaling is possible. This finally provides a complete method for the prediction of prototype part-load pressure and power oscillations. Since the proposed method is based on a simple limited control domain, limited modelling effort and also small modelling uncertainties are some major advantages. Due to the generality of the approach, a future application to other operating conditions such as full load will be straightforward.

  3. Kaiser Permanente-Sandia National Health Care Model: Phase 1 prototype final report. Part 2 -- Domain analysis

    Energy Technology Data Exchange (ETDEWEB)

    Edwards, D.; Yoshimura, A.; Butler, D.; Judson, R.; Mason, W.; Napolitano, L.; Mariano, R. [Sandia National Labs., Livermore, CA (United States); Eddy, D.; Schlessinger, L. [Kaiser Permanente, Pasadena, CA (United States)

    1996-11-01

    This report describes the results of a Cooperative Research and Development Agreement between Sandia National Laboratories and Kaiser Permanente Southern California to develop a prototype computer model of Kaiser Permanente`s health care delivery system. As a discrete event simulation, SimHCO models for each of 100,000 patients the progression of disease, individual resource usage, and patient choices in a competitive environment. SimHCO is implemented in the object-oriented programming language C{sup 2}, stressing reusable knowledge and reusable software components. The versioned implementation of SimHCO showed that the object-oriented framework allows the program to grow in complexity in an incremental way. Furthermore, timing calculations showed that SimHCO runs in a reasonable time on typical workstations, and that a second phase model will scale proportionally and run within the system constraints of contemporary computer technology.

  4. Prototyping the Future

    Science.gov (United States)

    1998-01-01

    Advanced Ceramics Research (ACR) of Tucson, Arizona, researches transforming scientific concepts into technological achievement. Through the SBIR (Small Business Innovative Research) program, ACR developed a high pressure and temperature fused deposition system, a prototyping system that is known as extrusion freeform fabrication. This system is useful in manufacturing prosthetics. ACR also developed a three-dimensional rapid prototyping process in which physical models are quickly created directly from computer generated models. Marshall Space Flight Center also contracted ACR to fabricate a set of ceramic engines to be appraised for a solar thermal rocket engine test program.

  5. High-temperature structural modeling on the PHE prototype for KAERI's helium gas loop

    Energy Technology Data Exchange (ETDEWEB)

    Song, Kee Nam; Kim, Y. W.; Hong, S. D.; Park, H. Y. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2010-10-15

    Recently, a nuclear hydrogen production is gathering worldwide attention since it can produce hydrogen, a promising energy carrier, without an environment burden. The nuclear hydrogen program in Republic of Korea (ROK) is strongly considered to produce hydrogen by Sulfur-Iodine (SI) water-split hydrogen production processes. An intermediate loop that transports the nuclear heat to the hydrogen production process is necessitated for the nuclear hydrogen program. In the intermediate loop, whereas the HGD (Hot Gas Duct) provide a route of a high temperature gas from the nuclear reactor to the IHX (Intermediate Heat Exchanger), the PHE (Process Heat Exchanger) is a component that utilizes the nuclear heat from the nuclear reactor to provide hydrogen. PHE is used in the various processes such as nuclear steam reforming, nuclear methanol, nuclear steel, nuclear oil refinery, and nuclear steam. PHE of the SO3 decomposer which generates process gas, such as H{sub 2}O, O{sub 2}, SO{sub 2}, and SO{sub 3} at very high temperature is a key component in the nuclear hydrogen program in ROK. Recently, KAERI (Korea Atomic Energy Research Institute) established the helium gas loop for the performance test of VHTR components and a PHE prototype by diffusion bonding process was manufactured in order to be tested in the helium gas loop. In this study, in order to investigate the macroscopic structural characteristics and behavior of the PHE prototype under the fixed test condition of the helium gas loop, FE (finite element) modeling, thermal analysis, and structural analysis on the PHE prototype are carried out

  6. Operative simulation of anterior clinoidectomy using a rapid prototyping model molded by a three-dimensional printer.

    Science.gov (United States)

    Okonogi, Shinichi; Kondo, Kosuke; Harada, Naoyuki; Masuda, Hiroyuki; Nemoto, Masaaki; Sugo, Nobuo

    2017-05-15

    As the anatomical three-dimensional (3D) positional relationship around the anterior clinoid process (ACP) is complex, experience of many surgeries is necessary to understand anterior clinoidectomy (AC). We prepared a 3D synthetic image from computed tomographic angiography (CTA) and magnetic resonance imaging (MRI) data and a rapid prototyping (RP) model from the imaging data using a 3D printer. The objective of this study was to evaluate anatomical reproduction of the 3D synthetic image and intraosseous region after AC in the RP model. In addition, the usefulness of the RP model for operative simulation was investigated. The subjects were 51 patients who were examined by CTA and MRI before surgery. The size of the ACP, thickness and length of the optic nerve and artery, and intraosseous length after AC were measured in the 3D synthetic image and RP model, and reproducibility in the RP model was evaluated. In addition, 10 neurosurgeons performed AC in the completed RP models to investigate their usefulness for operative simulation. The RP model reproduced the region in the vicinity of the ACP in the 3D synthetic image, including the intraosseous region, at a high accuracy. In addition, drilling of the RP model was a useful operative simulation method of AC. The RP model of the vicinity of ACP, prepared using a 3D printer, showed favorable anatomical reproducibility, including reproduction of the intraosseous region. In addition, it was concluded that this RP model is useful as a surgical education tool for drilling.

  7. Monotone viable trajectories for functional differential inclusions

    Science.gov (United States)

    Haddad, Georges

    This paper is a study on functional differential inclusions with memory which represent the multivalued version of retarded functional differential equations. The main result gives a necessary and sufficient equations. The main result gives a necessary and sufficient condition ensuring the existence of viable trajectories; that means trajectories remaining in a given nonempty closed convex set defined by given constraints the system must satisfy to be viable. Some motivations for this paper can be found in control theory where F( t, φ) = { f( t, φ, u)} uɛU is the set of possible velocities of the system at time t, depending on the past history represented by the function φ and on a control u ranging over a set U of controls. Other motivations can be found in planning procedures in microeconomics and in biological evolutions where problems with memory do effectively appear in a multivalued version. All these models require viability constraints represented by a closed convex set.

  8. Prototyping user displays using CLIPS

    Science.gov (United States)

    Kosta, Charles P.; Miller, Ross; Krolak, Patrick; Vesty, Matt

    1990-01-01

    CLIPS is being used as an integral module of a rapid prototyping system. The prototyping system consists of a display manager for object browsing, a graph program for displaying line and bar charts, and a communications server for routing messages between modules. A CLIPS simulation of a physical model provides dynamic control of the user's display. Currently, a project is well underway to prototype the Advanced Automation System (AAS) for the Federal Aviation Administration.

  9. Rapid Prototyping

    Science.gov (United States)

    1999-01-01

    Javelin, a Lone Peak Engineering Inc. Company has introduced the SteamRoller(TM) System as a commercial product. The system was designed by Javelin during a Phase II NASA funded small commercial product. The purpose of the invention was to allow automated-feed of flexible ceramic tapes to the Laminated Object Manufacturing rapid prototyping equipment. The ceramic material that Javelin was working with during the Phase II project is silicon nitride. This engineered ceramic material is of interest for space-based component.

  10. Comparison of the Accuracy of 3D Printed Prototypes Using the Stereolithography (SLA Method with the Digital CAD Models

    Directory of Open Access Journals (Sweden)

    Yankov Emil

    2017-01-01

    Full Text Available Each printing method and the materials used for prototype construction have distinct advantages and drawbacks. A large part of the 3D printer producers indicates high printing accuracy (positioning accuracies from 100 μm up to 1 μm and layer thickness from 100 μm tо 5 μm. In the process of layers deposition, the material is softened, melted or irradiated with a certain light source to polymerize. Thus, during the printing process, the volume of the materials is changing causing shrinking or expansion which often leads to the occurrence of precision errors in the prototype as opposed to the digital model. This phenomenon leads to distortions of the printed object known as a curling effect. Certain chemical compounds are added by the producers to multiple materials in order to enhance their mechanical and technological properties. However, this often results in changes of some printing parameters influencing the precision and quality of the manufactured object. The aim of the particular study is to establish the allowances with regard to the accuracy during manufacturing precise objects used in micro technologies as well as the necessary adjustments in dimensions because of the shrinkage and the positioning of the SLA 3D printed parts from photopolymer material.

  11. An application framework and data model prototype for the BaBar experiment

    CERN Document Server

    Quarrie, D

    2003-01-01

    The BaBar experiment is a high energy physics experiment to do physics with e sup + e sup - colliding beams in the 10 GeV center-of-mass energy at the PEP-II accelerator at the Stanford Linear Accelerator Center. The principal objectives are to study CP violation and rare processes in decays of B mesons. The experiment is under construction, with first data anticipated in 1999. The BaBar experiment is expected to accumulate of order 10 sup 9 events per calendar year, with over 10 sup 8 interesting hadronic events. The data must be stored efficiently, but must be easily accessible in order for multiple and frequent physics analyses to be carried out. The analysis framework must be flexible enough to accommodate a variety of analysis modules and multiple input/output streams. The BaBar collaboration has developed a prototype for the analysis framework and data access, written in C++ using an object-oriented design philosophy. The data access is based on the Farfalla package. The base class is a ''node''. Variou...

  12. Prototyping Design and Business

    DEFF Research Database (Denmark)

    Rasmussen, Jørgen; Kramp, Gunnar; Schiønning Mortensen, Bo

    2011-01-01

    to ‘look into the future,’ to find unidentified opportunities through an open process and to validate their decisions through repeated prototyping. Management, on the other hand, is traditionally trained to ‘look into to the past’ and make decisions based on thoroughly analyzing existing information...... for collaboration and interdisciplinary development. Based on the thinking behind a prototype presentation the paper describes a specific case where the model is used in collaboration between a team of designers and the management of a medium-sized company....

  13. Lumped Parameter Modeling for Rapid Vibration Response Prototyping and Test Correlation for Electronic Units

    Science.gov (United States)

    Van Dyke, Michael B.

    2013-01-01

    Present preliminary work using lumped parameter models to approximate dynamic response of electronic units to random vibration; Derive a general N-DOF model for application to electronic units; Illustrate parametric influence of model parameters; Implication of coupled dynamics for unit/board design; Demonstrate use of model to infer printed wiring board (PWB) dynamics from external chassis test measurement.

  14. Design and experiment of data-driven modeling and flutter control of a prototype wing

    Science.gov (United States)

    Lum, Kai-Yew; Xu, Cai-Lin; Lu, Zhenbo; Lai, Kwok-Leung; Cui, Yongdong

    2017-06-01

    This paper presents an approach for data-driven modeling of aeroelasticity and its application to flutter control design of a wind-tunnel wing model. Modeling is centered on system identification of unsteady aerodynamic loads using computational fluid dynamics data, and adopts a nonlinear multivariable extension of the Hammerstein-Wiener system. The formulation is in modal coordinates of the elastic structure, and yields a reduced-order model of the aeroelastic feedback loop that is parametrized by airspeed. Flutter suppression is thus cast as a robust stabilization problem over uncertain airspeed, for which a low-order H∞ controller is computed. The paper discusses in detail parameter sensitivity and observability of the model, the former to justify the chosen model structure, and the latter to provide a criterion for physical sensor placement. Wind tunnel experiments confirm the validity of the modeling approach and the effectiveness of the control design.

  15. A Prototype of Description Language for the Two-Hemisphere Model

    Directory of Open Access Journals (Sweden)

    Gusarovs Konstantins

    2015-12-01

    Full Text Available Nowadays, it is a modern trend to develop a CASE tool for system modelling with an ability to transform models defined in different notations and also to generate a program code. However development of such a tool often involves experimentation with transformation algorithms that may require changes to the source model structure. Since CASE tools are basically used to represent a model in diagram’s form, implementing experimental changes in a modelling tool can require additional effort. In order to solve this problem, authors propose a way of describing the two-hemisphere model using Domain Specific Language. This paper covers the language’s syntax as well as provides an example of the two-hemisphere model defined with its help.

  16. Prototype of the Mexican spatial data infrastructure for climate raster models and satellite imagery (“VISTA-C”)

    Science.gov (United States)

    Couturier, S.; Osorno Covarrubias, J.; Magaña Rueda, V.; Martínez Zazueta, I.; Vázquez Cruz, G.

    2017-01-01

    In the face of climatic uncertainty and its impacts on agriculture yields, there is a growing need for public institutions of subtropical countries to access as reliable as possible meteorological models and transmit a representation of their results in an effective way to stakeholders in agriculture. In many of these countries however, broad climatic regions and point-based statistics remain the core of these representations. The use of satellite imagery is largely limited to visual assessment, although it could serve as complementary data to meteorological raster models and the basis for spatially consistent quantitative impact assessments of meteorological events. In view of this situation in Mexico, a project developed by the Institute of Geography at UNAM university, and promoted by the National Institute of Geography and Statistics, consisted in the development of a climate monitoring system, which includes three main features: 1) a modular array storage system containing NOAA and GOES satellite imagery acquired though a receiving station (ERISA), 2) a climate modeling squeme based on successive error corrections of climate raster maps and associated models using the above mentioned imagery, and 3) an online, dynamic geovisualization of the results of the models. We discuss the implemented technologies and illustrate the VISTA-C prototype which has been released.

  17. On the Modelling and Control of a Laboratory Prototype of a Hydraulic Canal Based on a TITO Fractional-Order Model

    Directory of Open Access Journals (Sweden)

    Andres San-Millan

    2017-08-01

    Full Text Available In this paper a two-input, two-output (TITO fractional order mathematical model of a laboratory prototype of a hydraulic canal is proposed. This canal is made up of two pools that have a strong interaction between them. The inputs of the TITO model are the pump flow and the opening of an intermediate gate, and the two outputs are the water levels in the two pools. Based on the experiments developed in a laboratory prototype the parameters of the mathematical models have been identified. Then, considering the TITO model, a first control loop of the pump is closed to reproduce real-world conditions in which the water level of the first pool is not dependent on the opening of the upstream gate, thus leading to an equivalent single input, single output (SISO system. The comparison of the resulting system with the classical first order systems typically utilized to model hydraulic canals shows that the proposed model has significantly lower error: about 50%, and, therefore, higher accuracy in capturing the canal dynamics. This model has also been utilized to optimize the design of the controller of the pump of the canal, thus achieving a faster response to step commands and thus minimizing the interaction between the two pools of the experimental platform.

  18. Developing a Computational Environment for Coupling MOR Data, Maps, and Models: The Virtual Research Vessel (VRV) Prototype

    Science.gov (United States)

    Wright, D. J.; O'Dea, E.; Cushing, J. B.; Cuny, J. E.; Toomey, D. R.; Hackett, K.; Tikekar, R.

    2001-12-01

    The East Pacific Rise (EPR) from 9-10deg. N is currently our best-studied section of fast-spreading mid-ocean ridge. During several decades of investigation it has been explored by the full spectrum of ridge investigators, including chemists, biologists, geologists and geophysicists. These studies, and those that are ongoing, provide a wealth of observational data, results and data-driven theoretical (often numerical) studies that have not yet been fully utilized either by research scientists or by professional educators. While the situation is improving, a large amount of data, results, and related theoretical models still exist either in an inert, non-interactive form (e.g., journal publications) or as unlinked and currently incompatible computer data or algorithms. Infrastructure is needed not just for ready access to data, but linkage of disparate data sets (data to data) as well as data to models in order quantitatively evaluate hypotheses, refine numerical simulations, and explore new relations between observables. The prototype of a computational environment and toolset, called the Virtual Research Vessel (VRV), is being developed to provide scientists and educators with ready access to data, results and numerical models. While this effort is focused on the EPR 9N region, the resulting software tools and infrastructure should be helpful in establishing similar systems for other sections of the global mid-ocean ridge. Work in progress includes efforts to develop: (1) virtual database to incorporate diverse data types with domain-specific metadata into a global schema that allows web-query across different marine geology data sets, and an analogous declarative (database available) description of tools and models; (2) the ability to move data between GIS and the above DBMS, and tools to encourage data submission to archivesl (3) tools for finding and viewing archives, and translating between formats; (4) support for "computational steering" (tool composition

  19. Separation of viable and non-viable tomato (Solanum lycopersicum L.) seeds using single seed near-infrared spectroscopy

    DEFF Research Database (Denmark)

    Shrestha, Santosh; Deleuran, Lise Christina; Gislum, René

    2017-01-01

    -viable tomato seeds of two cultivars using chemometrics. The data exploration were performed by principal component analysis (PCA). Subsequently, viable and non-viable seeds were classified by partial least squares-discriminant analysis (PLS-DA) and interval PLS-DA (iPLS-DA). The indication of clustering...... of viable and non-viable seeds were observed in the PCA of each cultivar and the pooled samples. However, the PCA did not exhibit a pattern of separation among the early, normal and late germinated tomato seeds. The NIR spectral regions of 1160–1170, 1383–1397, 1647–1666, 1860–1884 and 1915–1940 nm were...... identified as important for classification of viable and non-viable tomato seeds by iPLS-DA. The sensitivity i.e. ability to correctly identify the positive samples and specificity i.e. ability to reject the negative samples of the (iPLS-DA) model on identified spectral regions for prediction of viable...

  20. Ride comfort optimization of a multi-axle heavy motorized wheel dump truck based on virtual and real prototype experiment integrated Kriging model

    Directory of Open Access Journals (Sweden)

    Bian Gong

    2015-06-01

    Full Text Available The optimization of hydro-pneumatic suspension parameters of a multi-axle heavy motorized wheel dump truck is carried out based on virtual and real prototype experiment integrated Kriging model in this article. The root mean square of vertical vibration acceleration, in the center of sprung mass, is assigned as the optimization objective. The constraints are the natural frequency, the working stroke, and the dynamic load of wheels. The suspension structure for the truck is the adjustable hydro-pneumatic suspension with ideal vehicle nonlinear characteristics, integrated with elastic and damping elements. Also, the hydraulic systems of two adjacent hydro-pneumatic suspension are interconnected. Considering the high complexity of the engineering model, a novel kind of meta-model called virtual and real prototype experiment integrated Kriging is proposed in this article. The interpolation principle and the construction of virtual and real prototype experiment integrated Kriging model were elucidated. Being different from traditional Kriging, virtual and real prototype experiment integrated Kriging combines the respective advantages of actual test and Computer Aided Engineering simulation. Based on the virtual and real prototype experiment integrated Kriging model, the optimization results, obtained by experimental verification, showed significant improvement in the ride comfort by 12.48% for front suspension and 11.79% for rear suspension. Compared with traditional Kriging, the optimization effect was improved by 3.05% and 3.38% respectively. Virtual and real prototype experiment integrated Kriging provides an effective way to approach the optimal solution for the optimization of high-complexity engineering problems.

  1. Simultaneous assessment of vessel size index, relative blood volume, and vessel permeability in a mouse brain tumor model using a combined spin echo gradient echo echo-planar imaging sequence and viable tumor analysis.

    Science.gov (United States)

    Kording, Fabian; Weidensteiner, Claudia; Zwick, Stefan; Osterberg, Nadja; Weyerbrock, Astrid; Staszewski, Ori; von Elverfeldt, Dominik; Reichardt, Wilfried

    2014-12-01

    Combining multiple imaging biomarkers in one magnetic resonance imaging (MRI) session would be beneficial to gain more data pertaining to tumor vasculature under therapy. Therefore, simultaneous measurement of perfusion, permeability, and vessel size imaging (VSI) using a gradient echo spin echo (GE-SE) sequence with injection of a clinically approved gadolinium (Gd)-based contrast agent was assessed in an orthotopic glioma model. A combined spin echo gradient echo echo-planar imaging sequence was implemented using a single contrast agent Gd diethylenetriaminepentaacetic acid (Gd-DTPA). This sequence was tested in a mouse brain tumor model (U87_MG), also under treatment with an antiangiogenic agent (bevacizumab). T2 maps and the apparent diffusion coefficient (ADC) were used to differentiate regions of cell death and viable tumor tissue. In viable tumor tissue regional blood volume was 5.7 ± 0.6% in controls and 5.2 ± 0.3% in treated mice. Vessel size was 18.1 ± 2.4 μm in controls and 12.8 ± 2.0 μm in treated mice, which correlated with results from immunohistochemistry. Permeability (K(trans) ) was close to zero in treated viable tumor tissue and 0.062 ± 0.024 min(-1) in controls. Our MRI method allows simultaneous assessment of several physiological and morphological parameters and extraction of MRI biomarkers for vasculature. These could be used for treatment monitoring of novel therapeutic agents such as antiangiogenic drugs. © 2014 Wiley Periodicals, Inc.

  2. Development of a prototype land use model for statewide transportation planning activities.

    Science.gov (United States)

    2011-11-30

    Future land use forecasting is an important input to transportation planning modeling. Traditionally, land use is allocated to individual : traffic analysis zones (TAZ) based on variables such as the amount of vacant land, zoning restriction, land us...

  3. Development of a prototype land use model for statewide transportation planning activities : summary.

    Science.gov (United States)

    2011-01-01

    Developing computer models of land use and : integrated transportation-land use are high : priorities for Florida transportation planners. : Land use information is fundamental to siting : roadways, signaling, setting maintenance : priorities, routin...

  4. System Modeling of Metabolic Heat Regenerated Temperature Swing Adsorption (MTSA) Subassembly for Prototype Design

    Science.gov (United States)

    Bower, Chad; Padilla, Sebastian; Iacomini, Christie; Paul, Heather L.

    2009-01-01

    This paper describes modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly: the sorbent bed, a sublimation (cooling) heat exchanger (SHX), and a condensing icing (warming) heat exchanger (CIHX). The primary function of the MTSA, removing carbon dioxide from a ventilation loop, is performed via the sorbent bed. The CIHX is used to heat the sorbent bed for desorption and to remove moisture from the ventilation loop while the SHX is alternately employed to cool the sorbent bed via sublimation of a spray of water at low pressure to prepare the reconditioned bed for the next cycle. This paper describes a system level model of the MTSA as developed in Thermal Desktop and SINDA/FLUINT including assumptions on geometry and physical phenomena, modeling methodology and relevant pa ra mete rizatio ns. Several areas of particular modeling interest are discussed. In the sorbent bed, capture of the translating CO2 saturation front and associated local energy and mass balance in both adsorbing and desorbing modes is covered. The CIHX poses particular challenges for modeling in SINDA/FLUINT as accounting for solids states in fluid submodels are not a native capability. Methods for capturing phase change and latent heat of ice as well as the transport properties across a layer of low density accreted frost are developed. This extended modeling capacity is applicable to temperatures greater than 258 K. To extend applicability to the minimum device temperature of 235 K, a method for a mapped transformation of temperatures from below the limit temperatures to some value above is given along with descriptions for associated material property transformations and the resulting impacts to total heat and mass transfer. Similar considerations are shown for the SHX along with assumptions for flow mechanics and resulting model methods for sublimation in a flow.

  5. Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint.

    Science.gov (United States)

    Olszewski, R; Tranduy, K; Reychler, H

    2010-07-01

    The authors present a new procedure of computer-assisted genioplasty. They determined the anterior, posterior and inferior limits of the chin in relation to the skull and face with the newly developed and validated three-dimensional cephalometric planar analysis (ACRO 3D). Virtual planning of the osteotomy lines was carried out with Mimics (Materialize) software. The authors built a three-dimensional rapid-prototyping multi-position model of the chin area from a medical low-dose CT scan. The transfer of virtual information to the operating room consisted of two elements. First, the titanium plates on the 3D RP model were pre-bent. Second, a surgical guide for the transfer of the osteotomy lines and the positions of the screws to the operating room was manufactured. The authors present the first case of the use of this model on a patient. The postoperative results are promising, and the technique is fast and easy-to-use. More patients are needed for a definitive clinical validation of this procedure. Copyright 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

  6. Multiple adjustable vascular clamp prototype: feasibility study on an experimental model of end-to-side microsurgical vascular anastomosis.

    Science.gov (United States)

    Pereira, A; Ichihara, S; Collon, S; Bodin, F; Gay, A; Facca, S; Liverneaux, P

    2014-12-01

    The aim of this study was to establish the feasibility of microsurgical end-to-side vascular anastomosis with a multiclamp adjustable vascular clamp prototype in an inert experimental model. Our method consisted of performing an end-to-side microsurgical anastomosis with 10/0 suture on a 2-mm diameter segment. In group 1, the end-to-side segment was held in place by a double clamp and a single end clamp. In group 2, the segment was held in place with a single multiclamp adjustable clamp. The average time for performing the anastomosis was shorter in group 2. The average number of sutures was the same in both groups. No leak was found and permeability was always positive in both groups. Our results show that performing end-to-side anastomosis with a multiclamp adjustable vascular clamp is feasible in an inert experimental model. Feasibility in a live animal model has to be demonstrated before clinical use. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  7. Experiments with a First Prototype of a Spatial Model of Cultural Meaning through Natural-Language Human-Robot Interaction

    Directory of Open Access Journals (Sweden)

    Oliver Schürer

    2018-01-01

    Full Text Available When using assistive systems, the consideration of individual and cultural meaning is crucial for the utility and acceptance of technology. Orientation, communication and interaction are rooted in perception and therefore always happen in material space. We understand that a major problem lies in the difference between human and technical perception of space. Cultural policies are based on meanings including their spatial situation and their rich relationships. Therefore, we have developed an approach where the different perception systems share a hybrid spatial model that is generated by artificial intelligence—a joint effort by humans and assistive systems. The aim of our project is to create a spatial model of cultural meaning based on interaction between humans and robots. We define the role of humanoid robots as becoming our companions. This calls for technical systems to include still inconceivable human and cultural agendas for the perception of space. In two experiments, we tested a first prototype of the communication module that allows a humanoid to learn cultural meanings through a machine learning system. Interaction is achieved by non-verbal and natural-language communication between humanoids and test persons. This helps us to better understand how a spatial model of cultural meaning can be developed.

  8. The "Research Audit" Model: A Prototype for Data-Driven Discovery of Interdisciplinary Biomedical Research

    Science.gov (United States)

    Burnette, Margaret H.

    2015-01-01

    The increasing interdisciplinarity of scientific research creates both challenges and opportunities for librarians. The liaison model may be inadequate for supporting campus research that represents multiple disciplines and geographically dispersed departments. The identification of units, researchers, and projects is a first step in planning and…

  9. A Prototype Educational Delivery System Using Water Quality Monitoring as a Model.

    Science.gov (United States)

    Glazer, Richard B.

    This report describes the model educational delivery system used by Ulster County Community College in its water quality monitoring program. The educational delivery system described in the report encompasses the use of behavioral objectives as its foundation and builds upon this foundation to form a complete system whose outcomes can be measured,…

  10. Prototyping the Use of Dispersion Models to Predict Ground Concentrations During Burning of Deployed Military Waste

    Science.gov (United States)

    2012-03-22

    and that approximately 40% of the pollutant was deposited in the 10 by 10 grid ( Schaum et al., 2010). In the late 90’s EPA and American...Sawyer, P. (2007). Atmospheric dispersion model validation in low wind conditions. National Security Technologies, LLC. Schaum , J., Cohen, M., Perry, S

  11. 20170313 - Rapid Prototyping of Physiologically-Based Toxicokinetic (PBTK) Models (SOT annual meeting)

    Science.gov (United States)

    Determining the tissue concentrations resulting from chemical exposure (i.e., toxicokinetics (TK)) is essential in emergency or other situations where time and data are lacking. Generic TK models can be created rapidly using in vitro assays and computational approaches to generat...

  12. A users guide for SAMM: a prototype southeast Alaska multiresource model.

    Science.gov (United States)

    D.L. Weyermann; R.D. Fight; L.D. Garrett

    1991-01-01

    This paper instructs resource analysts on using the southeast Alaska multiresource model (SAMM). SAMM is an interactive microcomputer program that allows users to explore relations among several resources in southeast Alaska (timber, anadromous fish. deer, and hydrology) and the effects of timber management activities (logging, thinning, and road building) on those...

  13. Modeling Of Metabolic Heat Regenerated Temperature Swing Adsorption (MTSA) Subassembly For Prototype Design

    Science.gov (United States)

    Bower, Chad E.; Padilla, Sebastian A.; Iacomini, Christie S.; Paul, Heather L.

    2010-01-01

    This paper describes modeling methods for the three core components of a Metabolic heat regenerated Temperature Swing Adsorption (MTSA) subassembly: a sorbent bed, a sublimation (cooling) heat exchanger (SHX), and a condensing icing (warming) heat exchanger (CIHX). The primary function of the MTSA, removing carbon dioxide from a space suit Portable Life Support System (PLSS) ventilation loop, is performed via the sorbent bed. The CIHX is used to heat the sorbent bed for desorption and to remove moisture from the ventilation loop while the SHX is alternately employed to cool the sorbent bed via sublimation of a spray of water at low pressure to prepare the reconditioned bed for the next cycle. This paper describes subsystem heat a mass transfer modeling methodologies relevant to the description of the MTSA subassembly in Thermal Desktop and SINDA/FLUINT. Several areas of particular modeling interest are discussed. In the sorbent bed, capture of the translating carbon dioxide (CO2) front and associated local energy and mass balance in both adsorbing and desorbing modes is covered. The CIHX poses particular challenges for modeling in SINDA/FLUINT as accounting for solids states in fluid submodels are not a native capability. Methods for capturing phase change and latent heat of ice as well as the transport properties across a layer of low density accreted frost are developed. This extended modeling capacity is applicable to temperatures greater than 258 K. To extend applicability to the minimum device temperature of 235 K, a method for a mapped transformation of temperatures from below the limit temperatures to some value above is given along with descriptions for associated material property transformations and the resulting impacts to total heat and mass transfer. Similar considerations are given for the SHX along with functional relationships for areal sublimation rates as limited by flow mechanics in t1he outlet duct.

  14. A satellite-driven, client-server hydro-economic model prototype for agricultural water management

    Science.gov (United States)

    Maneta, Marco; Kimball, John; He, Mingzhu; Payton Gardner, W.

    2017-04-01

    Anticipating agricultural water demand, land reallocation, and impact on farm revenues associated with different policy or climate constraints is a challenge for water managers and for policy makers. While current integrated decision support systems based on programming methods provide estimates of farmer reaction to external constraints, they have important shortcomings such as the high cost of data collection surveys necessary to calibrate the model, biases associated with inadequate farm sampling, infrequent model updates and recalibration, model overfitting, or their deterministic nature, among other problems. In addition, the administration of water supplies and the generation of policies that promote sustainable agricultural regions depend on more than one bureau or office. Unfortunately, managers from local and regional agencies often use different datasets of variable quality, which complicates coordinated action. To overcome these limitations, we present a client-server, integrated hydro-economic modeling and observation framework driven by satellite remote sensing and other ancillary information from regional monitoring networks. The core of the framework is a stochastic data assimilation system that sequentially ingests remote sensing observations and corrects the parameters of the hydro-economic model at unprecedented spatial and temporal resolutions. An economic model of agricultural production, based on mathematical programming, requires information on crop type and extent, crop yield, crop transpiration and irrigation technology. A regional hydro-climatologic model provides biophysical constraints to an economic model of agricultural production with a level of detail that permits the study of the spatial impact of large- and small-scale water use decisions. Crop type and extent is obtained from the Cropland Data Layer (CDL), which is multi-sensor operational classification of crops maintained by the United States Department of Agriculture. Because

  15. Using design tools in strategy workshops to co-create viable and value creating business model ideas with relational business-to-business partners

    DEFF Research Database (Denmark)

    Evers, Winie; Sørensen, Kirsten Bonde

    & Snehota (1995), and effective relational participation therefore involves understanding of one’s own and relational partners’ business models, including the value they seek from their network (George and Bock, 2010). But little research focus on how design can reveal dominant mental models and support...

  16. CAD, 3D modeling, engineering analysis, and prototype experimentation industrial and research applications

    CERN Document Server

    Zheng Li, Jeremy

    2015-01-01

    This succinct book focuses on computer aided design (CAD), 3-D modeling, and engineering analysis and the ways they can be applied effectively in research and industrial sectors including aerospace, defense, automotive, and consumer products. These efficient tools, deployed for R&D in the laboratory and the field, perform efficiently three-dimensional modeling of finished products, render complex geometrical product designs, facilitate structural analysis and optimal product design, produce graphic and engineering drawings, and generate production documentation. Written with an eye toward green energy installations and novel manufacturing facilities, this concise volume enables scientific researchers and engineering professionals to learn design techniques, control existing and complex issues, proficiently use CAD tools, visualize technical fundamentals, and gain analytic and technical skills. This book also: ·       Equips practitioners and researchers to handle powerful tools for engineering desi...

  17. Computational Modeling of a Mechanized Benchtop Apparatus for Leading-Edge Slat Noise Treatment Device Prototypes

    Science.gov (United States)

    Turner, Travis L.; Moore, James B.; Long, David L.

    2017-01-01

    Airframe noise is a growing concern in the vicinity of airports because of population growth and gains in engine noise reduction that have rendered the airframe an equal contributor during the approach and landing phases of flight for many transport aircraft. The leading-edge-slat device of a typical high-lift system for transport aircraft is a prominent source of airframe noise. Two technologies have significant potential for slat noise reduction; the slat-cove filler (SCF) and the slat-gap filler (SGF). Previous work was done on a 2D section of a transport-aircraft wing to demonstrate the implementation feasibility of these concepts. Benchtop hardware was developed in that work for qualitative parametric study. The benchtop models were mechanized for quantitative measurements of performance. Computational models of the mechanized benchtop apparatus for the SCF were developed and the performance of the system for five different SCF assemblies is demonstrated.

  18. NOGAPS-ALPHA: A Prototype High-Altitude Global NWP Model

    Science.gov (United States)

    2004-06-01

    issued by both the NASA Global Modeling and Analysis Office ( GMAO ) (Stajner et al. 2001) and the ECMWF (Dethof 2003). When activated, NOGAPS-ALPHA...the GMAO . At this time, the second NASA SAGE III Ozone Loss and Validation Experiment (SOLVE II) was underway, with NASA’s instrumented DC-8...units) over the South Pole derived from NOGAPS-ALPHA T79L54 forecasts initialized on 20 September 2003 (12:00 Z) using 3D ozone initialized from GMAO

  19. Product Development and Cost Analysis of Fabricating the Prototype of Roller Clamp in Intravenous (I.V) Tubing Medical Devices using Fused Deposition Modeling (FDM) Technology

    Science.gov (United States)

    Way, Yusoff

    2018-01-01

    The main aim of this research is to develop a new prototype and to conduct cost analysis of the existing roller clamp which is one of parts attached to Intravenous (I.V) Tubing used in Intravenous therapy medical device. Before proceed with the process to manufacture the final product using Fused Deposition Modeling (FDM) Technology, the data collected from survey were analyzed using Product Design Specifications approach. Selected concept has been proven to have better quality, functions and criteria compared to the existing roller clamp and the cost analysis of fabricating the roller clamp prototype was calculated.

  20. A prototype operational earthquake loss model for California based on UCERF3-ETAS – A first look at valuation

    Science.gov (United States)

    Field, Edward; Porter, Keith; Milner, Kevn

    2017-01-01

    We present a prototype operational loss model based on UCERF3-ETAS, which is the third Uniform California Earthquake Rupture Forecast with an Epidemic Type Aftershock Sequence (ETAS) component. As such, UCERF3-ETAS represents the first earthquake forecast to relax fault segmentation assumptions and to include multi-fault ruptures, elastic-rebound, and spatiotemporal clustering, all of which seem important for generating realistic and useful aftershock statistics. UCERF3-ETAS is nevertheless an approximation of the system, however, so usefulness will vary and potential value needs to be ascertained in the context of each application. We examine this question with respect to statewide loss estimates, exemplifying how risk can be elevated by orders of magnitude due to triggered events following various scenario earthquakes. Two important considerations are the probability gains, relative to loss likelihoods in the absence of main shocks, and the rapid decay of gains with time. Significant uncertainties and model limitations remain, so we hope this paper will inspire similar analyses with respect to other risk metrics to help ascertain whether operationalization of UCERF3-ETAS would be worth the considerable resources required.

  1. Regarding on the prototype solutions for the nonlinear fractional-order biological population model

    Energy Technology Data Exchange (ETDEWEB)

    Baskonus, Haci Mehmet, E-mail: hmbaskonus@gmail.com [Department of Computer Engineering, Tunceli University, Tunceli (Turkey); Bulut, Hasan [Department of Mathematics, Fzrat University, Elazig, Turkey, email: hbulut@firat.edu.tr (Turkey)

    2016-06-08

    In this study, we have submitted to literature a method newly extended which is called as Improved Bernoulli sub-equation function method based on the Bernoulli Sub-ODE method. The proposed analytical scheme has been expressed with steps. We have obtained some new analytical solutions to the nonlinear fractional-order biological population model by using this technique. Two and three dimensional surfaces of analytical solutions have been drawn by wolfram Mathematica 9. Finally, a conclusion has been submitted by mentioning important acquisitions founded in this study.

  2. Viable Syntax: Rethinking Minimalist Architecture

    Directory of Open Access Journals (Sweden)

    Ken Safir

    2010-03-01

    Full Text Available Hauser et al. (2002 suggest that the human language faculty emerged as a genetic innovation in the form of what is called here a ‘keystone factor’—a single, simple, formal mental capability that, interacting with the pre-existing faculties of hominid ancestors, caused a cascade of effects resulting in the language faculty in modern humans. They take Merge to be the keystone factor, but instead it is posited here that Merge is the pre-existing mechanism of thought made viable by a principle that permits relations interpretable at the interfaces to be mapped onto c-command. The simplified minimalist architecture proposed here respects the keystone factor as closely as possible, but is justified on the basis of linguistic analyses it makes available, including a relativized intervention theory applicable across Case, scope, agreement, selection and linearization, a derivation of the A/A’-distinction from Case theory, and predictions such as why in situ wh-interpretation is island-insensitive, but susceptible to intervention effects.

  3. Atrial Model Development and Prototype Simulations: CRADA Final Report on Tasks 3 and 4

    Energy Technology Data Exchange (ETDEWEB)

    O' Hara, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Villongco, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lightstone, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Richards, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-28

    The goal of this CRADA was to develop essential tools needed to simulate human atrial electrophysiology in 3-dimensions using an anatomical image-based anatomy and physiologically detailed human cellular model. The atria were modeled as anisotropic, representing the preferentially longitudinal electrical coupling between myocytes. Across the entire anatomy, cellular electrophysiology was heterogeneous, with left and right atrial myocytes defined differently. Left and right cell types for the “control” case of sinus rhythm (SR) was compared with remodeled electrophysiology and calcium cycling characteristics of chronic atrial fibrillation (cAF). The effects of Isoproterenol (ISO), a beta-adrenergic agonist that represents the functional consequences of PKA phosphorylation of various ion channels and transporters, was also simulated in SR and cAF to represent atrial activity under physical or emotional stress. Results and findings from Tasks 3 & 4 are described. Tasks 3 and 4 are, respectively: Input parameters prepared for a Cardioid simulation; Report including recommendations for additional scenario development and post-processing analytic strategy.

  4. Software evolution in prototyping

    OpenAIRE

    Berzins, V.; Qi, Lu

    1996-01-01

    This paper proposes a model of software changes for supporting the evolution of software prototypes. The software evolution steps are decomposed into primitive substeps that correspond to monotonic specification changes. This structure is used to rearrange chronological derivation sequences into structures containing only meaning-preserving changes. The authors indicate how this structure can be used to automatically combine different changes to a specification. A set of examples illustrates ...

  5. Standardized data collection to build prediction models in oncology: a prototype for rectal cancer.

    Science.gov (United States)

    Meldolesi, Elisa; van Soest, Johan; Damiani, Andrea; Dekker, Andre; Alitto, Anna Rita; Campitelli, Maura; Dinapoli, Nicola; Gatta, Roberto; Gambacorta, Maria Antonietta; Lanzotti, Vito; Lambin, Philippe; Valentini, Vincenzo

    2016-01-01

    The advances in diagnostic and treatment technology are responsible for a remarkable transformation in the internal medicine concept with the establishment of a new idea of personalized medicine. Inter- and intra-patient tumor heterogeneity and the clinical outcome and/or treatment's toxicity's complexity, justify the effort to develop predictive models from decision support systems. However, the number of evaluated variables coming from multiple disciplines: oncology, computer science, bioinformatics, statistics, genomics, imaging, among others could be very large thus making traditional statistical analysis difficult to exploit. Automated data-mining processes and machine learning approaches can be a solution to organize the massive amount of data, trying to unravel important interaction. The purpose of this paper is to describe the strategy to collect and analyze data properly for decision support and introduce the concept of an 'umbrella protocol' within the framework of 'rapid learning healthcare'.

  6. Cytokine gene expression in a mouse model: The first instillations with viable bacillus Calmette-Guerin determine the succeeding Th1 response

    NARCIS (Netherlands)

    de Boer, Elizabeth C.; Rooijakkers, Sietske J.; Schamhart, Denis H.; Kurth, Karl-Heinz

    2003-01-01

    Purpose: Bacillus Calmette-Guerin (BCG) therapy for superficial bladder cancer is immune dependent and activation of a Th1 immune response is probably required for clinical efficacy. Given the empirical approach to improving BCG therapy we investigated in a mouse model the consequences of

  7. Designing prototype model to support language development of autistic learners in early childhood

    Directory of Open Access Journals (Sweden)

    Dilek Karahoca

    2017-01-01

    Full Text Available Los niños con autismo generalmente muestran dificultad tanto en la comunicación como en el aprendizaje de idiomas. En este estudio, las interfaces interactivas diseñadas para ayudar a los niños con autismo a satisfacerlos con la educación digital. Interfac es son utilizables y coloridos, hace una enorme contribución en las aplicaciones educativas desde el período de la primera infancia en. Función de explicación lingüística se integró a las interfaces en la plataforma móvil con la ayuda de un cuento para per mitir a los niños a aprender objetos y sus funciones. Jugará un rol activo con el desarrollo del lenguaje para los estudiantes de la primera infancia. En la transmisión audible del cuento, al poner en primer plano la presentación objetiva, el equivalente d e las imágenes del objeto se emparejaron con las voces. Mediante el uso de la correspondencia entre voz y objeto que se conoce como el método natural en la enseñanza de lenguas, la actualización del comportamiento esperado se apoya proporcionando libertad de iteración individual. La disponibilidad de la plataforma se prueba con un grupo de usuarios expertizado y el nivel de usabilidad de la plataforma se detectó con la escala de usabilidad del sistema (SUS. Muestra que la usabilidad y practicidad del model o prototipo tiene una buena eficacia, eficiencia y satisfacción basada en la evaluación de expertos.

  8. The prototype/willingness model, academic versus health-risk information, and risk cognitions associated with nonmedical prescription stimulant use among college students.

    Science.gov (United States)

    Stock, Michelle L; Litt, Dana M; Arlt, Virginia; Peterson, Laurel M; Sommerville, Jessica

    2013-09-01

    Nonmedical prescription stimulant (NPS) use is an important problem among university students. The present studies applied the prototype-willingness model (Gibbons, Gerrard & Lane, 2003) to academic-based NPS use and examined the impact of academic versus health information on university students' NPS use cognitions. Study 1 used the prototype-willingness model to examine cognitions associated with academic-based willingness to use NPS. In Study 2, participants were randomly assigned to a control condition or to read information on the negative academic or negative health effects of NPS use. Beliefs, willingness, and expectation of engaging in future NPS use, prototypes of users, and perceived vulnerability were assessed. Students without a prescription for stimulants or a diagnosis of attention deficit hyperactivity disorder (ADHD) participated in each study (Ns = 555; 166). Twenty to thirty per cent reported NPS use, primarily for academic reasons. Controlling for past NPS, alcohol, and marijuana use: friends' NPS use, prototypes, perceived vulnerability, and negative health and positive academic beliefs were associated with willingness to use NPS in Study 1. Study 2 demonstrated that participants in the academic-information condition reported the lowest willingness and expectations as well as the least favourable prototypes of NPS users. Participants in the health-information condition reported the highest perceived vulnerability. These studies highlight: the utility of using a health model framework to examine NPS cognitions, the importance of examining beliefs about the behaviour, and the potential for academic and health information to reduce risky NPS use cognitions. © 2012 The British Psychological Society.

  9. Roots of success: cultivating viable community forestry

    Energy Technology Data Exchange (ETDEWEB)

    MacQueen, Duncan

    2009-05-15

    Is community forestry emerging from the shadows? The evidence shows that locally controlled enterprises can be economically viable, and often build on stronger social and environmental foundations than the big private-sector players. Certainly this is an industry in need of a shakeup. Many forests have become flashpoints where agro-industry, large-scale logging concerns and conservation interests clash, while forest-dependent communities are left out in the cold. Meanwhile, governments – driven by concerns over the climate impacts of deforestation – are having to gear up for legal, sustainable forestry production. Community forestry could be crucial to solving many of these challenges. By building on local core capabilities and developing strategic partnerships, they are forging key new business models that could transform the sector.

  10. Five-factor model personality disorder prototypes in a community sample: self- and informant-reports predicting interview-based DSM diagnoses.

    Science.gov (United States)

    Lawton, Erin M; Shields, Andrew J; Oltmanns, Thomas F

    2011-10-01

    The need for an empirically validated, dimensional system of personality disorders is becoming increasingly apparent. While a number of systems have been investigated in this regard, the five-factor model of personality has demonstrated the ability to adequately capture personality pathology. In particular, the personality disorder prototypes developed by Lynam and Widiger (2001) have been tested in a number of samples. The goal of the present study is to extend this literature by validating the prototypes in a large, representative community sample of later middle-aged adults using both self and informant reports. We found that the prototypes largely work well in this age group. Schizoid, Borderline, Histrionic, Narcissistic, and Avoidant personality disorders demonstrate good convergent validity, with a particularly strong pattern of discriminant validity for the latter four. Informant-reported prototypes show similar patterns to self reports for all analyses. This demonstrates that informants are not succumbing to halo representations of the participants, but are rather describing participants in nuanced ways. It is important that informant reports add significant predictive validity for Schizoid, Antisocial, Borderline, Histrionic, and Narcissistic personality disorders. Implications of our results and directions for future research are discussed.

  11. Design and fabrication of a long-life Stirling cycle cooler for space application. Phase 3: Prototype model

    Science.gov (United States)

    Keung, C.; Patt, P. J.; Starr, M.; Sweet, R. C.; Bourdillon, L. A.; Figueroa, R.; Hartmann, M.; Mcfarlane, R.

    1990-01-01

    A second-generation, Stirling-cycle cryocooler (cryogenic refrigerator) for space applications, with a cooling capacity of 5 watts at 65 K, was recently completed. The refrigerator, called the Prototype Model, was designed with a goal of 5 year life with no degradation in cooling performance. The free displacer and free piston of the refrigerator are driven directly by moving-magnet linear motors with the moving elements supported by active magnetic bearings. The use of clearance seals and the absence of outgassing material in the working volume of the refrigerator enable long-life operation with no deterioration in performance. Fiber-optic sensors detect the radial position of the shafts and provide a control signal for the magnetic bearings. The frequency, phase, stroke, and offset of the compressor and expander are controlled by signals from precision linear position sensors (LVDTs). The vibration generated by the compressor and expander is cancelled by an active counter balance which also uses a moving-magnet linear motor and magnetic bearings. The driving signal for the counter balance is derived from the compressor and expander position sensors which have wide bandwidth for suppression of harmonic vibrations. The efficiency of the three active members, which operate in a resonant mode, is enhanced by a magnetic spring in the expander and by gas springs in the compressor and counterbalance. The cooling was achieved with a total motor input power of 139 watts. The magnetic-bearing stiffness was significantly increased from the first-generation cooler to accommodate shuttle launch vibrations.

  12. Local staging of rectal carcinoma using the first prototype model of MR endoscope; Comparison with endoscopic ultrasonography

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Tsuneya; Suzuki, Takashi; Shirai, Masato; Kashiwagi, Akihito; Kobayashi, Seibi; Murano, Akihiko; Sasaki, Fumio (Aichi Cancer Center, Nagoya (Japan). Hospital)

    1994-02-01

    Twenty one patients undergoing surgical treatment for rectal carcinoma were examined by means of the first prototype model of MR endoscope (designed and provided by Yokokawa Medical Co. and Olympus Opt. Co., Tokyo, Japan) for the staging before surgery. The same patients also underwent the staging with endoscopic ultrasonography (EUS) before surgery. As a surface coil at the tip of antenna probe was accurately positioned on the cancerous lesion using non-magnetic fiberscope, all lesions were detected by MR endoscopy. The whole rectal wall was apparent as 3 or 5 layers on images obtained with 3D fast SPGR method of MR endoscopy. The diagnostic accuracies in detection of rectal wall infiltration by MR endoscopy were 100% (2/2) in the cases in which cancerous invasion was detected in the submucosa by MR endoscopy, 50% (3/6) in those of the muscularis propria, 83% (10/2) in those of perirectal fat, 100% (1/1) in those of the adjacent organs and 76% (16/21) in all cases. The diagnostic accuracies in detection of rectal wall infiltration by EUS were 100% (3/3) in the cases in which the cancerous invasion was detected in the submucosa by EUS, 57% (4/7) in those of the muscularis propria, 90% (9/10) in those of perirectal fat, 100% (1/1) in those of the adjacent organs and 81% (17/21) in all cases. The sensitivity of MR endoscopy in detection of lymph node infiltration was 85.7%; specificity, 61.5%; and accuracy, 70%. EUS showed the same sensitivity, specificity and accuracy. These findings suggest that MR endoscopy may be as accurate as EUS in the preoperative staging of rectal carcinoma. In comparison with EUS, MR endoscopy has multiplanar capabilities and wide scanning area. But, MR endoscopy needs MRI apparatus and MR imaging cannot be acquired in real time. The improvement of MR endoscope is desired. (author).

  13. Implicit face prototype learning from geometric information.

    Science.gov (United States)

    Or, Charles C-F; Wilson, Hugh R

    2013-04-19

    There is evidence that humans implicitly learn an average or prototype of previously studied faces, as the unseen face prototype is falsely recognized as having been learned (Solso & McCarthy, 1981). Here we investigated the extent and nature of face prototype formation where observers' memory was tested after they studied synthetic faces defined purely in geometric terms in a multidimensional face space. We found a strong prototype effect: The basic results showed that the unseen prototype averaged from the studied faces was falsely identified as learned at a rate of 86.3%, whereas individual studied faces were identified correctly 66.3% of the time and the distractors were incorrectly identified as having been learned only 32.4% of the time. This prototype learning lasted at least 1 week. Face prototype learning occurred even when the studied faces were further from the unseen prototype than the median variation in the population. Prototype memory formation was evident in addition to memory formation of studied face exemplars as demonstrated in our models. Additional studies showed that the prototype effect can be generalized across viewpoints, and head shape and internal features separately contribute to prototype formation. Thus, implicit face prototype extraction in a multidimensional space is a very general aspect of geometric face learning. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. A Computational Model of Public Support for Insurgency and Terrorism: A Prototype for More-General Social-Science Modeling

    Science.gov (United States)

    2013-01-01

    necessary to “roll the dice” each time the model was applied to a different snap - shot in time. Thus, care must be taken in using probabilistic...Gabriel (2012), “The Abbottabad Documents: Bin Laden’s Cautious Strategy in Yemen,” CTC Sentinel , May. Kulick, Jonathan, and Paul K. Davis (2003), Modeling

  15. Thermal Modeling and Simulation of Electron Beam Melting for Rapid Prototyping on Ti6Al4V Alloys

    Science.gov (United States)

    Neira Arce, Alderson

    To be a viable solution for contemporary engineering challenges, the use of titanium alloys in a wider range of applications requires the development of new techniques and processes that are able to decrease production cost and delivery times. As a result, the use of material consolidation in a near-net-shape fashion, using dynamic techniques like additive manufacturing by electron beam selective melting EBSM represents a promising method for part manufacturing. However, a new product material development can be cost prohibitive, requiring the use of computer modeling and simulation as a way to decrease turnaround time. To ensure a proper representation of the EBSM process, a thermophysical material characterization and comparison was first performed on two Ti6Al4V powder feedstock materials prepared by plasma (PREP) and gas atomized (GA) processes. This evaluation comprises an evaluation on particle size distribution, density and powder surface area, collectively with the temperature dependence on properties such as heat capacity, thermal diffusivity, thermal conductivity and surface emissivity. Multiple techniques were employed in this evaluation, including high temperature differential scanning calorimetry (HT-DSC), laser flash analysis (LFA), infrared remote temperature analysis (IR-Thermography), laser diffraction, liquid and gas pycnometry using mercury and krypton adsorption respectively. This study was followed by the review of complementary strategies to simulate the temperature evolution during the EBSM process, using a finite element analysis package called COMSOL Multiphysics. Two alternatives dedicated to representing a moving heat source (electron beam) and the powder bed were developed using a step-by-step approximation initiative. The first method consisted of the depiction of a powder bed discretized on an array of domains, each one representing a static melt pool, where the moving heat source was illustrated by a series of time dependant selective

  16. Can MODIS data calibrate and validate coastal sediment transport models? Rapid prototyping using 250 m data and the ECOMSED model for Lake Pontchartrain, LA USA.

    Science.gov (United States)

    Miller, R. L.; Glorioso, M. V.; Georgiou, I.; McCorquodale, J. A.; Crower, K.

    2006-12-01

    Field measurements from small boats and sparse arrays of instrumented buoys often do not provide sufficient data to capture the dynamic nature of bio-geophysical parameters in many coastal aquatic environments. Several investigators have shown that MODIS 250 m images can provide daily synoptic views of suspended sediment concentration in coastal waters to determine sediment transport and fate. However, the use of MODIS for coastal environments can be limited due to a lack of cloud-free images. Sediment transport models are not constrained by sky conditions but often suffer from a lack of in situ observations for model calibration or validation. We will demonstrate the utility of MODIS 250 m to calibrate (set model parameters), validate output, and set or re-set initial conditions of a hydrodynamic and sediment transport model (ECOMSED) developed for Lake Pontchartrain, LA USA. We will present our approach to quickly assess or `prototype' the application of NASA data to support environmental managers and decision makers. The combination of daily MODIS imagery and model simulations offer a more robust monitoring and prediction system of suspended sediments than available from either system alone. We will also present a brief introduction of how this approach will be implemented to assess the future use of NPOES-VIIRS images for monitoring coastal sediment processes.

  17. Climate-Weather Modeling Studies Using a Prototype Global Cloud-System Resolving Model: ALCF-2 Early Science Program

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, Christopher J. [National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States); Lin, Shian-Jiann [National Oceanic and Atmospheric Administration (NOAA), Boulder, CO (United States)

    2013-07-18

    Clouds remain the largest source of uncertainty in our understanding of global climate change. Different aspects of the planetary cloud field can provide positive and negative feedback to the Earth’s energy balance, and clouds of course are directly implicated in changes to the planetary distribution of precipitation. A fundamental problem in our current understanding of the role of clouds in the dynamics of climate are that current resolutions do not resolve the fundamental length scales associated with clouds. We expect our understanding of the role of clouds in climate to undergo a qualitative change as the resolutions of global models begin to encompass clouds. At these resolutions (which roughly scale with the tropopause height of 10km) non-hydrostatic dynamics become significant and deep convective processes are resolved. We are poised at the threshold of being able to run global scale simulations that include direct, nonparameterized, simulations of deep convective clouds. The goal of this research is to use the Argonne Leadership Computing Facility to explore the frontier of weather prediction and climate modeling with the newly developed Geophysical Fluid Dynamics (GFDL) global cloud-resolving model. A single unified atmospheric modeling system with a cubed-sphere dynamical core and bulk cloud micro-physics running at 3.5km resolutions was run with the goal of capturing the climatology of clouds and severe storms in a warming world. The ability to reproduce historical tropical storm statistics will be used as a test of this ground-breaking model.

  18. Rapid prototype and test

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, D.L.; Hansche, B.D.

    1996-06-01

    In order to support advanced manufacturing, Sandia has acquired the capability to produce plastic prototypes using stereolithography. Currently, these prototypes are used mainly to verify part geometry and ``fit and form`` checks. This project investigates methods for rapidly testing these plastic prototypes, and inferring from prototype test data actual metal part performance and behavior. Performances examined include static load/stress response, and structural dynamic (modal) and vibration behavior. The integration of advanced non-contacting measurement techniques including scanning laser velocimetry, laser holography, and thermoelasticity into testing of these prototypes is described. Photoelastic properties of the epoxy prototypes to reveal full field stress/strain fields are also explored.

  19. Architectures of prototypes and architectural prototyping

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Michael; Sandvad, Elmer

    1998-01-01

    This paper reports from experience obtained through development of a prototype of a global customer service system in a project involving a large shipping company and a university research group. The research group had no previous knowledge of the complex business of shipping and had never worked...... together as a team, but developed a prototype that more than fulfilled the expectations of the shipping company. The prototype should: - complete the first major phase within 10 weeks, - be highly vertical illustrating future work practice, - continuously live up to new requirements from prototyping...... sessions with users, - evolve over a long period of time to contain more functionality - allow for 6-7 developers working intensively in parallel. Explicit focus on the software architecture and letting the architecture evolve with the prototype played a major role in resolving these conflicting...

  20. Rethink! prototyping transdisciplinary concepts of prototyping

    CERN Document Server

    Nagy, Emilia; Stark, Rainer

    2016-01-01

    In this book, the authors describe the findings derived from interaction and cooperation between scientific actors employing diverse practices. They reflect on distinct prototyping concepts and examine the transformation of development culture in their fusion to hybrid approaches and solutions. The products of tomorrow are going to be multifunctional, interactive systems – and already are to some degree today. Collaboration across multiple disciplines is the only way to grasp their complexity in design concepts. This underscores the importance of reconsidering the prototyping process for the development of these systems, particularly in transdisciplinary research teams. “Rethinking Prototyping – new hybrid concepts for prototyping” was a transdisciplinary project that took up this challenge. The aim of this programmatic rethinking was to come up with a general concept of prototyping by combining innovative prototyping concepts, which had been researched and developed in three sub-projects: “Hybrid P...

  1. SU-C-209-05: Monte Carlo Model of a Prototype Backscatter X-Ray (BSX) Imager for Projective and Selective Object-Plane Imaging

    Energy Technology Data Exchange (ETDEWEB)

    Rolison, L; Samant, S; Baciak, J; Jordan, K [University of Florida, Gainesville, FL (United States)

    2016-06-15

    Purpose: To develop a Monte Carlo N-Particle (MCNP) model for the validation of a prototype backscatter x-ray (BSX) imager, and optimization of BSX technology for medical applications, including selective object-plane imaging. Methods: BSX is an emerging technology that represents an alternative to conventional computed tomography (CT) and projective digital radiography (DR). It employs detectors located on the same side as the incident x-ray source, making use of backscatter and avoiding ring geometry to enclose the imaging object. Current BSX imagers suffer from low spatial resolution. A MCNP model was designed to replicate a BSX prototype used for flaw detection in industrial materials. This prototype consisted of a 1.5mm diameter 60kVp pencil beam surrounded by a ring of four 5.0cm diameter NaI scintillation detectors. The imaging phantom consisted of a 2.9cm thick aluminum plate with five 0.6cm diameter holes drilled halfway. The experimental image was created using a raster scanning motion (in 1.5mm increments). Results: A qualitative comparison between the physical and simulated images showed very good agreement with 1.5mm spatial resolution in plane perpendicular to incident x-ray beam. The MCNP model developed the concept of radiography by selective plane detection (RSPD) for BSX, whereby specific object planes can be imaged by varying kVp. 10keV increments in mean x-ray energy yielded 4mm thick slice resolution in the phantom. Image resolution in the MCNP model can be further increased by increasing the number of detectors, and decreasing raster step size. Conclusion: MCNP modelling was used to validate a prototype BSX imager and introduce the RSPD concept, allowing for selective object-plane imaging. There was very good visual agreement between the experimental and MCNP imaging. Beyond optimizing system parameters for the existing prototype, new geometries can be investigated for volumetric image acquisition in medical applications. This material is

  2. Beyond LCDM: a viable alternative?

    CERN Document Server

    Gough, Michael Paul

    2016-01-01

    We are encouraged to look beyond LCDM as there are still no satisfactory explanations for either dark energy or dark matter. A data centred phenomenological approach supports an alternative explanation in which dark energy is not a universe-wide constant energy density, but the Holographic Dark Information Energy, HDIE, naturally centred around galaxies. HDIE can explain many of the effects attributed separately to Lambda and CDM. HDIE mimics Lambda with sufficient overall total energy and an equation of state parameter, w = -1.03+-0.05 for z 1.35, HDIE was phantom, w = -1.82+-0.08, providing a clear prediction that will enable the model to be verified or falsified. HDIE is shown to fit Planck dark energy wo-wa plots at least as well as Lambda, and to be consistent with other results that suggest dark energy was phantom at earlier times. A new w parameterisation is proposed here, as the usual CPL parameterisation is found to be biased and unsuitable for distinguishing between the HDIE/baryon and LCDM models.

  3. Implicit alcohol attitudes predict drinking behaviour over and above intentions and willingness in young adults but willingness is more important in adolescents: Implications for the Prototype Willingness Model.

    Science.gov (United States)

    Davies, Emma L; Paltoglou, Aspasia E; Foxcroft, David R

    2017-05-01

    Dual process models, such as the Prototype Willingness Model (PWM), propose to account for both intentional and reactive drinking behaviour. Current methods of measuring constructs in the PWM rely on self-report, thus require a level of conscious deliberation. Implicit measures of attitudes may overcome this limitation and contribute to our understanding of how prototypes and willingness influence alcohol consumption in young people. This study aimed to explore whether implicit alcohol attitudes were related to PWM constructs and whether they would add to the prediction of risky drinking. The study involved a cross-sectional design. The sample included 501 participants from the United Kingdom (M age 18.92; range 11-51; 63% female); 230 school pupils and 271 university students. Participants completed explicit measures of alcohol prototype perceptions, willingness, drunkenness, harms, and intentions. They also completed an implicit measure of alcohol attitudes, using the Implicit Association Test. Implicit alcohol attitudes were only weakly related to the explicit measures. When looking at the whole sample, implicit alcohol attitudes did not add to the prediction of willingness over and above prototype perceptions. However, for university students implicit attitudes added to the prediction of behaviour, over and above intentions and willingness. For school pupils, willingness was a stronger predictor of behaviour than intentions or implicit attitudes. Adding implicit measures to the PWM may contribute to our understanding of the development of alcohol behaviours in young people. Further research could explore how implicit attitudes develop alongside the shift from reactive to planned behaviour. Statement of contribution What is already known on this subject? Young people's drinking tends to occur in social situations and is driven in part by social reactions within these contexts. The Prototype Willingness Model (PWM) attempts to explain such reactive behaviour as

  4. Pure Quantum Interpretations Are not Viable

    Science.gov (United States)

    Schmelzer, I.

    2011-02-01

    Pure interpretations of quantum theory, which throw away the classical part of the Copenhagen interpretation without adding new structure to its quantum part, are not viable. This is a consequence of a non-uniqueness result for the canonical operators.

  5. Experimental design for the optimization of propidium monoazide treatment to quantify viable and non-viable bacteria in piggery effluents.

    Science.gov (United States)

    Desneux, Jérémy; Chemaly, Marianne; Pourcher, Anne-Marie

    2015-08-16

    Distinguishing between viable and dead bacteria in animal and urban effluents is a major challenge. Among existing methods, propidium monoazide (PMA)-qPCR is a promising way to quantify viable cells. However, its efficiency depends on the composition of the effluent, particularly on total suspended solids (TSS)) and on methodological parameters. The aim of this study was evaluate the influence of three methodological factors (concentration of PMA, incubation time and photoactivation time) on the efficiency of PMA-qPCR to quantify viable and dead cells of Listeria monocytogenes used as a microorganism model, in two piggery effluents (manure and lagoon effluent containing 20 and 0.4 TSS g.kg(-1), respectively). An experimental design strategy (Doehlert design and desirability function) was used to identify the experimental conditions to achieve optimal PMA-qPCR results. The quantification of viable cells of L. monocytogenes was mainly influenced by the concentration of PMA in the manure and by the duration of photoactivation in the lagoon effluent. Optimal values differed with the matrix: 55 μM PMA, 5 min incubation and 56 min photoactivation for manure and 20 μM PMA, 20 min incubation and 30 min photoactivation for lagoon effluent. Applied to five manure and four lagoon samples, these conditions resulted in satisfactory quantification of viable and dead cells. PMA-qPCR can be used on undiluted turbid effluent with high levels of TSS, provided preliminary tests are performed to identify the optimal conditions.

  6. Reconstruction of large cranial defects with poly-methyl-methacrylate (PMMA) using a rapid prototyping model and a new technique for intraoperative implant modeling.

    Science.gov (United States)

    Unterhofer, Claudia; Wipplinger, Christoph; Verius, Michael; Recheis, Wolfgang; Thomé, Claudius; Ortler, Martin

    Reconstruction of large cranial defects after craniectomy can be accomplished by free-hand poly-methyl-methacrylate (PMMA) or industrially manufactured implants. The free-hand technique often does not achieve satisfactory cosmetic results but is inexpensive. In an attempt to combine the accuracy of specifically manufactured implants with low cost of PMMA. Forty-six consecutive patients with large skull defects after trauma or infection were retrospectively analyzed. The defects were reconstructed using computer-aided design/computer-aided manufacturing (CAD/CAM) techniques. The computer file was imported into a rapid prototyping (RP) machine to produce an acrylonitrile-butadiene-styrene model (ABS) of the patient's bony head. The gas-sterilized model was used as a template for the intraoperative modeling of the PMMA cranioplasty. Thus, not the PMMA implant was generated by CAD/CAM technique but the model of the patients head to easily form a well-fitting implant. Cosmetic outcome was rated on a six-tiered scale by the patients after a minimum follow-up of three months. The mean size of the defect was 74.36cm2. The implants fitted well in all patients. Seven patients had a postoperative complication and underwent reoperation. Mean follow-up period was 41 months (range 2-91 months). Results were excellent in 42, good in three and not satisfactory in one patient. Costs per implant were approximately 550 Euros. PMMA implants fabricated in-house by direct molding using a bio-model of the patients bony head are easily produced, fit properly and are inexpensive compared to cranial implants fabricated with other RP or milling techniques. Copyright © 2017 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  7. A Classification and Bibliography of Software Prototyping.

    Science.gov (United States)

    1992-10-01

    Integrating the Role of Rapid Prototyping and Requirements Specification Using the Object-oriented Paradigm Author: Heisler , K.G.; Tsai, W.T. Source...specification, structured analysis Abstract: A methodology for rapid prototyping is described. Modified data flow diagrams are used as a graphical tool and...problem. The graphical editor under development for the computer aided prototyping system (CAPS) proposes a dataflow- diagram -based model with multiple

  8. The Application Trends of Rapid Prototyping Manufacturing

    Directory of Open Access Journals (Sweden)

    Qiu Xiao Lin

    2016-01-01

    characteristics of laser stero lithography (LSL selective laser sintering (SLS, three-dimensional printing (DP, fused deposition modeling (FDM, computer numerical control (CNC and other rapid prototyping technologies. After discussed these five rapid prototyping technology materials, we presented the hotspot and direction of rapid prototyping technology and look forward to the development of its technique, the expansion of its field and the progress of its academic ideology.

  9. Modeling and development of INS-aided PLLs in a GNSS/INS deeply-coupled hardware prototype for dynamic applications.

    Science.gov (United States)

    Zhang, Tisheng; Niu, Xiaoji; Ban, Yalong; Zhang, Hongping; Shi, Chuang; Liu, Jingnan

    2015-01-05

    A GNSS/INS deeply-coupled system can improve the satellite signals tracking performance by INS aiding tracking loops under dynamics. However, there was no literature available on the complete modeling of the INS branch in the INS-aided tracking loop, which caused the lack of a theoretical tool to guide the selections of inertial sensors, parameter optimization and quantitative analysis of INS-aided PLLs. This paper makes an effort on the INS branch in modeling and parameter optimization of phase-locked loops (PLLs) based on the scalar-based GNSS/INS deeply-coupled system. It establishes the transfer function between all known error sources and the PLL tracking error, which can be used to quantitatively evaluate the candidate inertial measurement unit (IMU) affecting the carrier phase tracking error. Based on that, a steady-state error model is proposed to design INS-aided PLLs and to analyze their tracking performance. Based on the modeling and error analysis, an integrated deeply-coupled hardware prototype is developed, with the optimization of the aiding information. Finally, the performance of the INS-aided PLLs designed based on the proposed steady-state error model is evaluated through the simulation and road tests of the hardware prototype.

  10. Performance of cold-preserved rat liver Microorgans as the biological component of a simplified prototype model of bioartificial liver.

    Science.gov (United States)

    Pizarro, María Dolores; Mediavilla, María Gabriela; Quintana, Alejandra Beatriz; Scandizzi, Ángel Luis; Rodriguez, Joaquín Valentín; Mamprin, María Eugenia

    2016-11-28

    To develop a simplified bioartificial liver (BAL) device prototype, suitable to use freshly and preserved liver Microorgans (LMOs) as biological component. The system consists of 140 capillary fibers through which goat blood is pumped. The evolution of hematocrit, plasma and extra-fiber fluid osmolality was evaluated without any biological component, to characterize the prototype. LMOs were cut and cold stored 48 h in BG35 and ViaSpan(®) solutions. Fresh LMOs were used as controls. After preservation, LMOs were loaded into the BAL and an ammonia overload was added. To assess LMOs viability and functionality, samples were taken to determine lactate dehydrogenase (LDH) release and ammonia detoxification capacity. The concentrations of ammonia and glucose, and the fluids osmolalities were matched after the first hour of perfusion, showing a proper exchange between blood and the biological compartment in the minibioreactor. After 120 min of perfusion, LMOs cold preserved in BG35 and ViaSpan(®) were able to detoxify 52.9% ± 6.5% and 53.6% ± 6.0%, respectively, of the initial ammonia overload. No significant differences were found with Controls (49.3% ± 8.8%, P < 0.05). LDH release was 6.0% ± 2.3% for control LMOs, and 6.2% ± 1.7% and 14.3% ± 1.1% for BG35 and ViaSpan(®) cold preserved LMOs, respectively (n = 6, P < 0.05). This prototype relied on a simple design and excellent performance. It's a practical tool to evaluate the detoxification ability of LMOs subjected to different preservation protocols.

  11. Development of a Prototype Model to Establish an Economic Earthwork Plan that Includes the Selection of a Dump Site/Borrow Pit

    Directory of Open Access Journals (Sweden)

    Seung Hak Lee

    2017-01-01

    Full Text Available Earthwork in road construction projects is the major activity that accounts for about 20%–30% of the total construction cost, and the internal/external hauling plan is the key factor for determining the successful completion of the project. However, the hauling plan at the site, which includes the selection of the dump site and borrow pit, is usually determined by the site manager’s subjective and empirical discretion alone. Therefore, this study has developed a prototype model that provides the optimal internal/external hauling plan. It includes the determination of the most economical dump sites and borrow pits (location and number among other candidate sites as well. The transshipment problem theory is incorporated into the optimized algorithm with the consideration of various factors affecting earthwork cost. Direct costs from an optimized transport based on an existing model against another from this model were compared to prove its feasibility. As a result, the reduction of earthwork cost including the dump site/borrow pits reached 4%–8%. This result implies that this prototype model would also be useful in reducing both the earthwork cost and the occurrence of exhaust gas from earthwork equipment by providing optimized transportation paths.

  12. Development of a prototype kinestatic platform for application to space and ground servicing tasks. Phase 1: Concept Modeling

    Science.gov (United States)

    Duffy, J.; Crane, C.

    1993-01-01

    The Center for Intelligent Machines and Robotics (CIMAR) of the University of Florida, in conjunction with Rockwell International is developing an electro-mechanical device called a Kinestatic Platform (KP) for aerospace applications. The goal of the current project is to develop a prototype KP which is capable of manipulating a 50 lb. payload. This prototype will demonstrate the feasibility of implementing a scaled up version to perform high precision manipulation of distributed systems and to control contact forces and allowable motions (rotations and translations), which is defined here as Kinestatic Control, in a six dimensional, partially constrained environment, simultaneously and independently. The objectives of the Phase 1 effort were as follows: (1) Identify specific NASA applications where the KP technology can be applied. (2) Select one application for development. (3) Develop a conceptual design of the KP specifically for the selected application. This includes the steps of developing a set of detailed performance criteria, establishing and making selection of the mechanism design parameters, and evaluating the expected system response. (4) Develop a computer graphics animation of the KP as it performs the selected application. This report will proceed by providing a technical description of the KP followed by how each of these objectives was addressed.

  13. Digital Prototyping of Milk Products

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Nielsen, Otto Højager Attermann; Skytte, Jacob Lercke

    2012-01-01

    an acidification process over time. The challenge is to investigate whether we can use the resulting diffuse reflectance images to measure the static structure factor or similar optical properties of gels. We can see some correlation between measured diffuse reflectance and the rheology of the gel. This indicates...... the extension. This work was (in part) financed by the Centre for Imaging Food Quality project which is funded by the Danish Council for Strategic Research (contract no 09-067039) within the Programme Commission on Health, Food and Welfare. This work was also in part financed by the Digital Prototypes project......Digital prototyping has revolutionised the automotive industry by providing designers and engineers with digital models of their products that enable virtual product design, visualisation, and simulation [1]. However, digital prototyping does not exist in the food industry as the colloidal nature...

  14. Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method

    Science.gov (United States)

    Li, Zhixiong; Yan, Xinping; Yuan, Chengqing; Peng, Zhongxiao; Li, Li

    2011-10-01

    Gear systems are an essential element widely used in a variety of industrial applications. Since approximately 80% of the breakdowns in transmission machinery are caused by gear failure, the efficiency of early fault detection and accurate fault diagnosis are therefore critical to normal machinery operations. Reviewed literature indicates that only limited research has considered the gear multi-fault diagnosis, especially for single, coupled distributed and localized faults. Through virtual prototype simulation analysis and experimental study, a novel method for gear multi-fault diagnosis has been presented in this paper. This new method was developed based on the integration of Wavelet transform (WT) technique, Autoregressive (AR) model and Principal Component Analysis (PCA) for fault detection. The WT method was used in the study as the de-noising technique for processing raw vibration signals. Compared with the noise removing method based on the time synchronous average (TSA), the WT technique can be performed directly on the raw vibration signals without the need to calculate any ensemble average of the tested gear vibration signals. More importantly, the WT can deal with coupled faults of a gear pair in one operation while the TSA must be carried out several times for multiple fault detection. The analysis results of the virtual prototype simulation prove that the proposed method is a more time efficient and effective way to detect coupled fault than TSA, and the fault classification rate is superior to the TSA based approaches. In the experimental tests, the proposed method was compared with the Mahalanobis distance approach. However, the latter turns out to be inefficient for the gear multi-fault diagnosis. Its defect detection rate is below 60%, which is much less than that of the proposed method. Furthermore, the ability of the AR model to cope with localized as well as distributed gear faults is verified by both the virtual prototype simulation and

  15. Software Prototyping: Designing Systems for Users.

    Science.gov (United States)

    Spies, Phyllis Bova

    1983-01-01

    Reports on major change in computer software development process--the prototype model, i.e., implementation of skeletal system that is enhanced during interaction with users. Expensive and unreliable software, software design errors, traditional development approach, resources required for prototyping, success stories, and systems designer's role…

  16. Accuracy and precision of polyurethane dental arch models fabricated using a three-dimensional subtractive rapid prototyping method with an intraoral scanning technique.

    Science.gov (United States)

    Kim, Jae-Hong; Kim, Ki-Baek; Kim, Woong-Chul; Kim, Ji-Hwan; Kim, Hae-Young

    2014-03-01

    This study aimed to evaluate the accuracy and precision of polyurethane (PUT) dental arch models fabricated using a three-dimensional (3D) subtractive rapid prototyping (RP) method with an intraoral scanning technique by comparing linear measurements obtained from PUT models and conventional plaster models. Ten plaster models were duplicated using a selected standard master model and conventional impression, and 10 PUT models were duplicated using the 3D subtractive RP technique with an oral scanner. Six linear measurements were evaluated in terms of x, y, and z-axes using a non-contact white light scanner. Accuracy was assessed using mean differences between two measurements, and precision was examined using four quantitative methods and the Bland-Altman graphical method. Repeatability was evaluated in terms of intra-examiner variability, and reproducibility was assessed in terms of inter-examiner and inter-method variability. The mean difference between plaster models and PUT models ranged from 0.07 mm to 0.33 mm. Relative measurement errors ranged from 2.2% to 7.6% and intraclass correlation coefficients ranged from 0.93 to 0.96, when comparing plaster models and PUT models. The Bland-Altman plot showed good agreement. The accuracy and precision of PUT dental models for evaluating the performance of oral scanner and subtractive RP technology was acceptable. Because of the recent improvements in block material and computerized numeric control milling machines, the subtractive RP method may be a good choice for dental arch models.

  17. A Climate Service Prototype for the Hydropower Industry: Using a Multi-Model Approach to Improve Seasonal Forecasts of the Spring Flood Period in Sweden.

    Science.gov (United States)

    Foster, K. L.; Uvo, C. B.; Olsson, J.; Bosshard, T.; Berg, P.; Södling, J.

    2015-12-01

    The Ångerman River is Sweden's third largest river with over 50 regulation reservoirs, 42 hydropower stations and accounts for nearly 20% of the country's hydropower production. In seasonally snow covered regions, such as the Ångerman river system, the winter precipitation is often temporarily stored in the snow pack during the colder months and released over a relatively short period of intense flows during in the warmer months. These spring flood events dominate the hydrology in these regions and as such reliable hydrological forecasts of these events are in great demand. However, it has been shown that the spread in the forecast error of operational hydrological forecasts in Sweden have not changed significantly over the last 25 years (Arheimer et al., 2012). Building on previous work by Foster et al. (2011) and Olsson et al. (2015), a multi-model hydrological seasonal forecast prototype has been developed for the Ångerman river system and applied to the spring flood season. The prototype employs different model-chain approaches: (1) a climatological forecast, where historical observations for the same period are selected to run the hydrological model, (2) a reduced historical ensemble, where analogue years from the historical observations dataset are selected to run the hydrological model, (3) using bias corrected meteorological seasonal forecasts from the ECMWF to force the hydrological model, and (4) statistical downscaling large-scale circulation variables from ECMWF seasonal forecasts directly to accumulated discharge. These different chains are combined into a multi-model ensemble forecast. The different approaches and the multi-model prototype are evaluated against the state-of-the-art operational system for the spring flood season for the period 1981-2014 in the Ångerman river system. References Arheimer, B., Lindström, G., and Olsson, J.: A systematic review of sensitivities in the Swedish flood-forecasting system, Atmos. Res., 100, 275-284, 2011

  18. Fabrication and Prototyping Lab

    Data.gov (United States)

    Federal Laboratory Consortium — Purpose: The Fabrication and Prototyping Lab for composite structures provides a wide variety of fabrication capabilities critical to enabling hands-on research and...

  19. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  20. Using Generic Examples to Make Viable Arguments

    Science.gov (United States)

    Adams, Anne E.; Ely, Rob; Yopp, David

    2017-01-01

    The twenty-first century has seen an increased call to train students to craft mathematical arguments. The third of the Common Core's (CCSS) Standards for Mathematical Practice (SMP 3) (CCSSI 2010) calls for all mathematically proficient students to "construct viable arguments" to support the truth of their ideas and to "critique…

  1. Viable Short-Term Directed Energy Weapon Naval Solutions: A Systems Analysis of Current Prototypes

    Science.gov (United States)

    2013-06-01

    him with constructing the first primitive “death ray” in 212 BC during the siege of Syracuse (MIT 2.009ers 2005). More recently, Nikola Tesla spent...directed energy in 1934 ( Tesla Invents Peace Ray 2011). Years later, during the height of the Cold War, the Soviet Union conducted experiments on the...Testing Developmental Laser Against Small Surface Vessels.” Inside the Navy, June 7, 2010. Tesla Invents Peace Ray. 2011. http://www.tfcbooks.com

  2. Viable short-term directed energy weapon naval solutions: a systems analysis of current prototypes

    OpenAIRE

    Ciullo, Dan; deLongpre, Jeff; Mcarthur, Sim; Nowakowski, Jake; Shene, Rich; Taylor, Earvin; White, Roosevelt; Cheng, Po-Yu; Heng, Yinghui; Wong, Chia Sern; Wong, Wai Keat; Phua, Yee Ling; Zlatsin, Philip; Choon, Junwei; Neo, Yong Shern

    2013-01-01

    Approved for public release; distribution is unlimited With conventional weapons nearing their peak capability, the need to identify alternative war fighting solutions suggests a look at Directed Energy Weapons (DEWs). The goal is to change the means by which warfare is conducted to improve operational efficiencies and overall effectiveness. The Naval Postgraduate School Systems Engineering and Analysis (SEA-19B) Capstone project team examined how existing directed energy technologies can ...

  3. EPCiR prototype

    DEFF Research Database (Denmark)

    2003-01-01

    A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage.......A prototype of a residential pervasive computing platform based on OSGi involving among other a mock-up of an health care bandage....

  4. Innovation og prototyper

    DEFF Research Database (Denmark)

    Hansen, Svend Aage; Hansen, Erik; Kyvsgård, Poul H.

    2006-01-01

    Denne artikel advokerer for at danske virksomheder skal (gen)indføre prototyper som middel til at hurtigere at komme fra ide til salg og samtidig skabe et bedre produkt. LEGO og B&O gennemgår deres erfaringer med anvendelse af simple prototyper tidligt i det forløb, der nyudvikler et produkt. De...

  5. Cooperative Prototyping Experiments

    DEFF Research Database (Denmark)

    Bødker, Susanne; Grønbæk, Kaj

    1989-01-01

    This paper describes experiments with a design technique that we denote cooperative prototyping. The experiments consider design of a patient case record system for municipal dental clinics in which we used HyperCard, an off the shelf programming environment for the Macintosh. In the ecperiments we...... tried to achieve a fluent work-like evaluation of prototypes where users envisioned future work with a computer tool, at the same time as we made on-line modifications of prototypes in cooperation with the users when breakdown occur in their work-like evaluation. The experiments showed...... that it was possible to make a number of direct manipulation changes of prototypes in cooperation with the users, in interplay with their fluent work-like evaluation of these. However, breakdown occurred in the prototyping process when we reached the limits of the direct manipulation support for modification. From...

  6. Academic Pediatric Dentistry is a Rewarding, Financially Viable Career Path.

    Science.gov (United States)

    Townsend, Janice A; Chi, Donald L

    2017-09-15

    Newly graduated pediatric dentists have unprecedented levels of debt. High levels of student debt may be perceived as an obstacle to pursue an academic career. However, opportunities exist through faculty compensation models and loan repayment programs that make an academic career financially viable. The purpose of this paper is to outline the benefits of a career in academic dentistry and provide examples of young pediatric dentistry faculty members who have been able to manage student debt while pursuing meaningful and rewarding careers.

  7. Prototyping Design and Business

    DEFF Research Database (Denmark)

    Rasmussen, Jørgen; Kramp, Gunnar; Schiønning Mortensen, Bo

    2011-01-01

    It is increasingly common that design firms go from working with their client’s development department on specific products, to discussing strategic issues directly with the company’s management. In this new territory designers face a number of challenges. Designers are traditionally trained to ‘...... for collaboration and interdisciplinary development. Based on the thinking behind a prototype presentation the paper describes a specific case where the model is used in collaboration between a team of designers and the management of a medium-sized company........ This paper suggests a model, ‘The Strategic Design Matrix,’ to bridge the gap between the design approach and the management approach to strategic development processes. Through common references, a common language and a common basis understanding, the model aims to create a communicative platform......It is increasingly common that design firms go from working with their client’s development department on specific products, to discussing strategic issues directly with the company’s management. In this new territory designers face a number of challenges. Designers are traditionally trained...

  8. Rapid prototyping and stereolithography in dentistry.

    Science.gov (United States)

    Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

    2015-04-01

    The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

  9. Rapid prototyping and stereolithography in dentistry

    Directory of Open Access Journals (Sweden)

    Sanjna Nayar

    2015-01-01

    Full Text Available The word rapid prototyping (RP was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD. To materialize virtual objects using CAD, a computer aided manufacture (CAM process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

  10. Predicting tobacco smoking among male adolescents in Hamadan City, west of Iran in 2014: an application of the prototype willingness model.

    Science.gov (United States)

    Barati, Majid; Allahverdipour, Hamid; Hidarnia, Alireza; Niknami, Shasodin

    2015-01-01

    As adolescent tobacco smoking has become a widespread problem in developing countries, it is time to understand the cognitive determinants of adolescents' decisions to engage in tobacco smoking. This study aimed to investigate the predicting factors associated with tobacco smoking among male adolescents based on Prototype Willingness Model (PWM) as a theoretical framework. This descriptive-analytical study was carried out on 810 male adolescents of Hamadan City western Iran, recruited with a multistage sampling method. The data-gathering tool consisted of a questionnaire based on the PWM constructs. Data analysis was performed using SPSS-19 software, by bivariate correlations, liner and logistic regression tests. The prevalence of current tobacco smoking was 17.2%. Behavioral willingness and subjective norms were the most important predictors of behavioral intentions, whereas subjective norms, attitude and prototype were the most important predictors for behavioral willingness. The result obtained from logistic regression analysis revealed that both pathways of PWM constructs [behavioral intention (OR=1.207; 95% CI: 1.13, 1.28) and behavioral willingness (OR=1.334; 95% CI: 1.25, 1.41) were significant predicting factors for tobacco smoking among male adolescents. The framework of the PWM is applicable and useful in understanding tobacco smoking among male adolescents. In addition, the results revealed the importance of social reaction path when examining adolescents' smoking status.

  11. 3D Rapid Prototyping for Otolaryngology—Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling

    Science.gov (United States)

    Chan, Harley H. L.; Siewerdsen, Jeffrey H.; Vescan, Allan; Daly, Michael J.; Prisman, Eitan; Irish, Jonathan C.

    2015-01-01

    The aim of this study was to demonstrate the role of advanced fabrication technology across a broad spectrum of head and neck surgical procedures, including applications in endoscopic sinus surgery, skull base surgery, and maxillofacial reconstruction. The initial case studies demonstrated three applications of rapid prototyping technology are in head and neck surgery: i) a mono-material paranasal sinus phantom for endoscopy training ii) a multi-material skull base simulator and iii) 3D patient-specific mandible templates. Digital processing of these phantoms is based on real patient or cadaveric 3D images such as CT or MRI data. Three endoscopic sinus surgeons examined the realism of the endoscopist training phantom. One experienced endoscopic skull base surgeon conducted advanced sinus procedures on the high-fidelity multi-material skull base simulator. Ten patients participated in a prospective clinical study examining patient-specific modeling for mandibular reconstructive surgery. Qualitative feedback to assess the realism of the endoscopy training phantom and high-fidelity multi-material phantom was acquired. Conformance comparisons using assessments from the blinded reconstructive surgeons measured the geometric performance between intra-operative and pre-operative reconstruction mandible plates. Both the endoscopy training phantom and the high-fidelity multi-material phantom received positive feedback on the realistic structure of the phantom models. Results suggested further improvement on the soft tissue structure of the phantom models is necessary. In the patient-specific mandible template study, the pre-operative plates were judged by two blinded surgeons as providing optimal conformance in 7 out of 10 cases. No statistical differences were found in plate fabrication time and conformance, with pre-operative plating providing the advantage of reducing time spent in the operation room. The applicability of common model design and fabrication techniques

  12. 3D Rapid Prototyping for Otolaryngology-Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling.

    Directory of Open Access Journals (Sweden)

    Harley H L Chan

    Full Text Available The aim of this study was to demonstrate the role of advanced fabrication technology across a broad spectrum of head and neck surgical procedures, including applications in endoscopic sinus surgery, skull base surgery, and maxillofacial reconstruction. The initial case studies demonstrated three applications of rapid prototyping technology are in head and neck surgery: i a mono-material paranasal sinus phantom for endoscopy training ii a multi-material skull base simulator and iii 3D patient-specific mandible templates. Digital processing of these phantoms is based on real patient or cadaveric 3D images such as CT or MRI data. Three endoscopic sinus surgeons examined the realism of the endoscopist training phantom. One experienced endoscopic skull base surgeon conducted advanced sinus procedures on the high-fidelity multi-material skull base simulator. Ten patients participated in a prospective clinical study examining patient-specific modeling for mandibular reconstructive surgery. Qualitative feedback to assess the realism of the endoscopy training phantom and high-fidelity multi-material phantom was acquired. Conformance comparisons using assessments from the blinded reconstructive surgeons measured the geometric performance between intra-operative and pre-operative reconstruction mandible plates. Both the endoscopy training phantom and the high-fidelity multi-material phantom received positive feedback on the realistic structure of the phantom models. Results suggested further improvement on the soft tissue structure of the phantom models is necessary. In the patient-specific mandible template study, the pre-operative plates were judged by two blinded surgeons as providing optimal conformance in 7 out of 10 cases. No statistical differences were found in plate fabrication time and conformance, with pre-operative plating providing the advantage of reducing time spent in the operation room. The applicability of common model design and

  13. 3D Rapid Prototyping for Otolaryngology-Head and Neck Surgery: Applications in Image-Guidance, Surgical Simulation and Patient-Specific Modeling.

    Science.gov (United States)

    Chan, Harley H L; Siewerdsen, Jeffrey H; Vescan, Allan; Daly, Michael J; Prisman, Eitan; Irish, Jonathan C

    2015-01-01

    The aim of this study was to demonstrate the role of advanced fabrication technology across a broad spectrum of head and neck surgical procedures, including applications in endoscopic sinus surgery, skull base surgery, and maxillofacial reconstruction. The initial case studies demonstrated three applications of rapid prototyping technology are in head and neck surgery: i) a mono-material paranasal sinus phantom for endoscopy training ii) a multi-material skull base simulator and iii) 3D patient-specific mandible templates. Digital processing of these phantoms is based on real patient or cadaveric 3D images such as CT or MRI data. Three endoscopic sinus surgeons examined the realism of the endoscopist training phantom. One experienced endoscopic skull base surgeon conducted advanced sinus procedures on the high-fidelity multi-material skull base simulator. Ten patients participated in a prospective clinical study examining patient-specific modeling for mandibular reconstructive surgery. Qualitative feedback to assess the realism of the endoscopy training phantom and high-fidelity multi-material phantom was acquired. Conformance comparisons using assessments from the blinded reconstructive surgeons measured the geometric performance between intra-operative and pre-operative reconstruction mandible plates. Both the endoscopy training phantom and the high-fidelity multi-material phantom received positive feedback on the realistic structure of the phantom models. Results suggested further improvement on the soft tissue structure of the phantom models is necessary. In the patient-specific mandible template study, the pre-operative plates were judged by two blinded surgeons as providing optimal conformance in 7 out of 10 cases. No statistical differences were found in plate fabrication time and conformance, with pre-operative plating providing the advantage of reducing time spent in the operation room. The applicability of common model design and fabrication techniques

  14. Prototype-Incorporated Emotional Neural Network.

    Science.gov (United States)

    Oyedotun, Oyebade K; Khashman, Adnan

    2017-08-15

    Artificial neural networks (ANNs) aim to simulate the biological neural activities. Interestingly, many ''engineering'' prospects in ANN have relied on motivations from cognition and psychology studies. So far, two important learning theories that have been subject of active research are the prototype and adaptive learning theories. The learning rules employed for ANNs can be related to adaptive learning theory, where several examples of the different classes in a task are supplied to the network for adjusting internal parameters. Conversely, the prototype-learning theory uses prototypes (representative examples); usually, one prototype per class of the different classes contained in the task. These prototypes are supplied for systematic matching with new examples so that class association can be achieved. In this paper, we propose and implement a novel neural network algorithm based on modifying the emotional neural network (EmNN) model to unify the prototype- and adaptive-learning theories. We refer to our new model as ``prototype-incorporated EmNN''. Furthermore, we apply the proposed model to two real-life challenging tasks, namely, static hand-gesture recognition and face recognition, and compare the result to those obtained using the popular back-propagation neural network (BPNN), emotional BPNN (EmNN), deep networks, an exemplar classification model, and k-nearest neighbor.

  15. PRMS Data Warehousing Prototype

    Science.gov (United States)

    Guruvadoo, Eranna K.

    2002-01-01

    Project and Resource Management System (PRMS) is a web-based, mid-level management tool developed at KSC to provide a unified enterprise framework for Project and Mission management. The addition of a data warehouse as a strategic component to the PRMS is investigated through the analysis, design and implementation processes of a data warehouse prototype. As a proof of concept, a demonstration of the prototype with its OLAP's technology for multidimensional data analysis is made. The results of the data analysis and the design constraints are discussed. The prototype can be used to motivate interest and support for an operational data warehouse.

  16. LHC prototype magnet

    CERN Multimedia

    1991-01-01

    1.5 metre superconducting magnet. This prototype magnet for the LHC was cooled to a few degrees above absolute zero, which allowed it to obtain the world record for the highest magnetic field for an accelerator magnet in 1991.

  17. ICI Showcase House Prototype

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-02-16

    Building Science Corporation collaborated with ICI Homes in Daytona Beach, FL on a 2008 prototype Showcase House that demonstrates the energy efficiency and durability upgrades that ICI currently promotes through its in-house efficiency program called EFactor.

  18. Air-spore in Cartagena, Spain: viable and non-viable sampling methods.

    Science.gov (United States)

    Elvira-Rendueles, Belen; Moreno, Jose; Garcia-Sanchez, Antonio; Vergara, Nuria; Martinez-Garcia, Maria Jose; Moreno-Grau, Stella

    2013-01-01

    In the presented study the airborne fungal spores of the semiarid city of Cartagena, Spain, are identified and quantified by means of viable or non-viable sampling methods. Airborne fungal samples were collected simultaneously using a filtration method and a pollen and particle sampler based on the Hirst methodology. This information is very useful for elucidating geographical patterns of hay fever and asthma. The qualitative results showed that when the non-viable methodology was employed, Cladosporium, Ustilago, and Alternaria were the most abundant spores identified in the atmosphere of Cartagena, while the viable methodology showed that the most abundant taxa were: Cladosporium, Penicillium, Aspergillus and Alternaria. The quantitative results of airborne fungal spores identified by the Hirst-type air sampler (non-viable method), showed that Deuteromycetes represented 74% of total annual spore counts, Cladosporium being the major component of the fungal spectrum (62.2%), followed by Alternaria (5.3%), and Stemphylium (1.3%). The Basidiomycetes group represented 18.9% of total annual spore counts, Ustilago (7.1%) being the most representative taxon of this group and the second most abundant spore type. Ascomycetes accounted for 6.9%, Nectria (2.3%) being the principal taxon. Oomycetes (0.2%) and Zygomycestes and Myxomycestes (0.06%) were scarce. The prevailing species define our bioaerosol as typical of dry air. The viable methodology was better at identifying small hyaline spores and allowed for the discrimination of the genus of some spore types. However, non-viable methods revealed the richness of fungal types present in the bioaerosol. Thus, the use of both methodologies provides a more comprehensive characterization of the spore profile.

  19. Design Science Research toward Designing/Prototyping a Repeatable Model for Testing Location Management (LM) Algorithms for Wireless Networking

    Science.gov (United States)

    Peacock, Christopher

    2012-01-01

    The purpose of this research effort was to develop a model that provides repeatable Location Management (LM) testing using a network simulation tool, QualNet version 5.1 (2011). The model will provide current and future protocol developers a framework to simulate stable protocol environments for development. This study used the Design Science…

  20. Parejas viables que perduran en el tiempo

    OpenAIRE

    Juan José Cuervo Rodríguez

    2013-01-01

    El presente artículo científico presenta resultados del proceso llevado a cabo en el proyecto de investigación docente "Mecanismos de autorregulación en parejas viables que perduran en el tiempo". Se soporta en una mirada compleja de la psicología basada en una epistemología de la construcción. En el ámbito metodológico, se inscribe en los estudios de terapia familiar desde una perspectiva de la comunicación humana como un todo integrado. Participaron nueve parejas. Los criterios de inclusión...

  1. Enzymatic isolation of viable human odontoblasts.

    Science.gov (United States)

    Cuffaro, H M; Pääkkönen, V; Tjäderhane, L

    2016-05-01

    To improve an enzymatic method previously used for isolation of rat odontoblasts to isolate viable mature human odontoblasts. Collagenase I, collagenase I/hyaluronidase mixture and hyaluronidase were used to extract mature human odontoblasts from the pulp chamber. Detachment of odontoblasts from dentine was determined with field emission scanning electron microscopy (FESEM) and to analyse the significance of differences in tubular diameter, and the t-test was used. MTT-reaction was used to analyse cell viability, and nonparametric Kruskal-Wallis and Mann-Whitney post hoc tests were used to analyse the data. Immunofluorescent staining of dentine sialoprotein (DSP), aquaporin-4 (AQP4) and matrix metalloproteinase-20 (MMP-20) and quantitative PCR (qPCR) of dentine sialophosphoprotein (DSPP) were used to confirm the odontoblastic nature of the cells. MTT-reaction and FESEM demonstrated collagenase I/hyaluronidase resulted in more effective detachment and higher viability than collagenase I alone. Hyaluronidase alone was not able to detach odontoblasts. Immunofluorescence revealed the typical odontoblastic-morphology with one process, and DSP, AQP4 and MMP-20 were detected. Quantitative PCR of DSPP confirmed that the isolated cells expressed this odontoblast-specific gene. The isolation of viable human odontoblasts was successful. The cells demonstrated morphology typical for odontoblasts and expressed characteristic odontoblast-type genes and proteins. This method will enable new approaches, such as apoptosis analysis, for studies using fully differentiated odontoblasts. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

  2. Minimizing the extra-oral time in autogeneous tooth transplantation: use of computer-aided rapid prototyping (CARP as a duplicate model tooth

    Directory of Open Access Journals (Sweden)

    Seung-Jong Lee

    2012-08-01

    Full Text Available Objectives The maintenance of the healthy periodontal ligament cells of the root surface of donor tooth and intimate surface contact between the donor tooth and the recipient bone are the key factors for successful tooth transplantation. In order to achieve these purposes, a duplicated donor tooth model can be utilized to reduce the extra-oral time using the computer-aided rapid prototyping (CARP technique. Materials and Methods Briefly, a three-dimensional digital imaging and communication in medicine (DICOM image with the real dimensions of the donor tooth was obtained from a computed tomography (CT, and a life-sized resin tooth model was fabricated. Dimensional errors between real tooth, 3D CT image model and CARP model were calculated. And extra-oral time was recorded during the autotransplantation of the teeth. Results The average extra-oral time was 7 min 25 sec with the range of immediate to 25 min in cases which extra-oral root canal treatments were not performed while it was 9 min 15 sec when extra-oral root canal treatments were performed. The average radiographic distance between the root surface and the alveolar bone was 1.17 mm and 1.35 mm at mesial cervix and apex; they were 0.98 mm and 1.26 mm at the distal cervix and apex. When the dimensional errors between real tooth, 3D CT image model and CARP model were measured in cadavers, the average of absolute error was 0.291 mm between real teeth and CARP model. Conclusions These data indicate that CARP may be of value in minimizing the extra-oral time and the gap between the donor tooth and the recipient alveolar bone in tooth transplantation.

  3. Power API Prototype

    Energy Technology Data Exchange (ETDEWEB)

    2014-12-04

    The software serves two purposes. The first purpose of the software is to prototype the Sandia High Performance Computing Power Application Programming Interface Specification effort. The specification can be found at http://powerapi.sandia.gov . Prototypes of the specification were developed in parallel with the development of the specification. Release of the prototype will be instructive to anyone who intends to implement the specification. More specifically, our vendor collaborators will benefit from the availability of the prototype. The second is in direct support of the PowerInsight power measurement device, which was co-developed with Penguin Computing. The software provides a cluster wide measurement capability enabled by the PowerInsight device. The software can be used by anyone who purchases a PowerInsight device. The software will allow the user to easily collect power and energy information of a node that is instrumented with PowerInsight. The software can also be used as an example prototype implementation of the High Performance Computing Power Application Programming Interface Specification.

  4. Immediate facial rehabilitation in cancer patients using CAD-CAM and rapid prototyping technology: a pilot study.

    Science.gov (United States)

    Ciocca, Leonardo; Fantini, Massimiliano; Marchetti, Claudio; Scotti, Roberto; Monaco, Carlo

    2010-06-01

    This study describes the workflow in a procedure to create a provisional facial prosthesis for cancer patients using digital and rapid prototyping technologies without the need for supporting craniofacial implants. An integrated workflow procedure aimed at the construction of provisional silicone prosthesis was used to rehabilitate a facial disfigurement in a patient who had undergone ablative surgery of the midface. A laser scan of the defect was obtained, and a digital model of the patient's face was constructed using virtual mirroring of the healthy side and referencing the "Nose Digital Library." The missing volume of the face was reconstructed, and a rapid-prototyped mold was devised to process the silicone prosthesis. A provisional eyeglasses-supported prosthesis designed with a CAD/CAM-projected titanium substructure was connected using the micro-components of implant prosthetic devices. The workflow described herein offers a viable procedure for quickly restoring facial defects by means of provisional prosthetic rehabilitation.

  5. From prototype to product

    DEFF Research Database (Denmark)

    Andersen, Tariq Osman; Bansler, Jørgen P.; Kensing, Finn

    2017-01-01

    This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product. In particu......This paper delves into the challenges of engaging patients, clinicians and industry stakeholders in the participatory design of an mHealth platform for patient-clinician collaboration. It follows the process from the development of a research prototype to a commercial software product....... In particular, we draw attention to four major challenges of (a) aligning the different concerns of patients and clinicians, (b) designing according to clinical accountability, (c) ensuring commercial interest, and (d) dealing with regulatory constraints when prototyping safety critical health Information...

  6. Prototyping a Smart City

    DEFF Research Database (Denmark)

    Korsgaard, Henrik; Brynskov, Martin

    In this paper, we argue that by approaching the so-called Smart City as a design challenge, and an interaction design perspective, it is possible to both uncover existing challenges in the interplay between people, technology and society, as well as prototype possible futures. We present a case...... in which we exposed data about the online communication between the citizens and the municipality on a highly visible media facade, while at the same time prototyped a tool that enabled citizens to report ‘bugs’ within the city....

  7. Application of computer-aided three-dimensional skull model with rapid prototyping technique in repair of zygomatico-orbito-maxillary complex fracture.

    Science.gov (United States)

    Li, Wei Zhong; Zhang, Mei Chao; Li, Shao Ping; Zhang, Lei Tao; Huang, Yu

    2009-06-01

    With the advent of CAD/CAM and rapid prototyping (RP), a technical revolution in oral and maxillofacial trauma was promoted to benefit treatment, repair of maxillofacial fractures and reconstruction of maxillofacial defects. For a patient with zygomatico-facial collapse deformity resulting from a zygomatico-orbito-maxillary complex (ZOMC) fracture, CT scan data were processed by using Mimics 10.0 for three-dimensional (3D) reconstruction. The reduction design was aided by 3D virtual imaging and the 3D skull model was reproduced using the RP technique. In line with the design by Mimics, presurgery was performed on the 3D skull model and the semi-coronal incision was taken for reduction of ZOMC fracture, based on the outcome from the presurgery. Postoperative CT and images revealed significantly modified zygomatic collapse and zygomatic arch rise and well-modified facial symmetry. The CAD/CAM and RP technique is a relatively useful tool that can assist surgeons with reconstruction of the maxillofacial skeleton, especially in repairs of ZOMC fracture.

  8. Evaluation and Verification of Decadal Predictions using the MiKlip Central Evaluation System - a Case Study using the MiKlip Prototype Model Data

    Science.gov (United States)

    Illing, Sebastian; Schuster, Mareike; Kadow, Christopher; Kröner, Igor; Richling, Andy; Grieger, Jens; Kruschke, Tim; Lang, Benjamin; Redl, Robert; Schartner, Thomas; Cubasch, Ulrich

    2016-04-01

    MiKlip is project for medium-term climate prediction funded by the Federal Ministry of Education and Research in Germany (BMBF) and aims to create a model system that is able provide reliable decadal climate forecasts. During the first project phase of MiKlip the sub-project INTEGRATION located at Freie Universität Berlin developed a framework for scientific infrastructures (FREVA). More information about FREVA can be found in EGU2016-13060. An instance of this framework is used as Central Evaluation System (CES) during the MiKlip project. Throughout the first project phase various sub-projects developed over 25 analysis tools - so called plugins - for the CES. The main focus of these plugins is on the evaluation and verification of decadal climate prediction data, but most plugins are not limited to this scope. They target a wide range of scientific questions. Starting from preprocessing tools like the "LeadtimeSelector", which creates lead-time dependent time-series from decadal hindcast sets, over tracking tools like the "Zykpak" plugin, which can objectively locate and track mid-latitude cyclones, to plugins like "MurCSS" or "SPECS", which calculate deterministic and probabilistic skill metrics. We also integrated some analyses from Model Evaluation Tools (MET), which was developed at NCAR. We will show the theoretical background, technical implementation strategies, and some interesting results of the evaluation of the MiKlip Prototype decadal prediction system for a selected set of these tools.

  9. Validity of prototype diagnosis for mood and anxiety disorders.

    Science.gov (United States)

    DeFife, Jared A; Peart, Joanne; Bradley, Bekh; Ressler, Kerry; Drill, Rebecca; Westen, Drew

    2013-02-01

    CONTEXT With growing recognition that most forms of psychopathology are best represented as dimensions or spectra, a central question becomes how to implement dimensional diagnosis in a way that is empirically sound and clinically useful. Prototype matching, which involves comparing a patient's clinical presentation with a prototypical description of the disorder, is an approach to diagnosis that has gained increasing attention with forthcoming revisions to both the DSM and the International Classification of Diseases. OBJECTIVE To examine prototype diagnosis for mood and anxiety disorders. DESIGN, SETTING, AND PATIENTS In the first study, we examined clinicians' DSM-IV and prototype diagnoses with their ratings of the patients' adaptive functioning and patients' self-reported symptoms. In the second study, independent interviewers made prototype diagnoses following either a systematic clinical interview or a structured diagnostic interview. A third interviewer provided independent ratings of global adaptive functioning. Patients were recruited as outpatients (study 1; N = 84) and from primary care clinics (study 2; N = 143). MAIN OUTCOME MEASURES Patients' self-reported mood, anxiety, and externalizing symptoms along with independent clinical ratings of adaptive functioning. RESULTS Clinicians' prototype diagnoses showed small to moderate correlations with patient-reported psychopathology and performed as well as or better than DSM-IV diagnoses. Prototype diagnoses from independent interviewers correlated on average r = .50 and showed substantial incremental validity over DSM-IV diagnoses in predicting adaptive functioning. CONCLUSIONS Prototype matching is a viable alternative for psychiatric diagnosis. As in research on personality disorders, mood and anxiety disorder prototypes outperformed DSM-IV decision rules in predicting psychopathology and global functioning. Prototype matching has multiple advantages, including ease of use in clinical practice, reduced

  10. "The Life of Crime Does Not Pay; Stop and Think!": The Process of Co-Constructing a Prototype Pedagogical Model of Sport for Working with Youth from Socially Vulnerable Backgrounds

    Science.gov (United States)

    Luguetti, Carla; Oliver, Kimberly L.; Dantas, Luiz E. P. B. T.; Kirk, David

    2017-01-01

    Purpose: This study discusses the process of co-constructing a prototype pedagogical model for working with youth from socially vulnerable backgrounds. Participants and settings: This six-month activist research project was conducted in a soccer program in a socially vulnerable area of Brazil in 2013. The study included 17 youths, 4 coaches, a…

  11. Improving Climate Literacy Using The Ice Sheet System Model (ISSM): A Prototype Virtual Ice Sheet Laboratory For Use In K-12 Classrooms

    Science.gov (United States)

    Halkides, D. J.; Larour, E. Y.; Perez, G.; Petrie, K.; Nguyen, L.

    2013-12-01

    Statistics indicate that most Americans learn what they will know about science within the confines of our public K-12 education system and the media. Next Generation Science Standards (NGSS) aim to remedy science illiteracy and provide guidelines to exceed the Common Core State Standards that most U.S. state governments have adopted, by integrating disciplinary cores with crosscutting ideas and real life practices. In this vein, we present a prototype ';Virtual Ice Sheet Laboratory' (I-Lab), geared to K-12 students, educators and interested members of the general public. I-Lab will allow users to perform experiments using a state-of-the-art dynamical ice sheet model and provide detailed downloadable lesson plans, which incorporate this model and are consistent with NGSS Physical Science criteria for different grade bands (K-2, 3-5, 6-8, and 9-12). The ultimate goal of this website is to improve public climate science literacy, especially in regards to the crucial role of the polar ice sheets in Earth's climate and sea level. The model used will be the Ice Sheet System Model (ISSM), an ice flow model developed at NASA's Jet Propulsion Laboratory and UC Irvine, that simulates the near-term evolution of polar ice sheets (Greenland and Antarctica) and includes high spatial resolution capabilities and data assimilation to produce realistic simulations of ice sheet dynamics at the continental scale. Open sourced since 2011, ISSM is used in cutting edge cryosphere research around the globe. Thru I-Lab, students will be able to access ISSM using a simple, online graphical interface that can be launched from a web browser on a computer, tablet or smart phone. The interface will allow users to select different climate conditions and watch how the polar ice sheets evolve in time under those conditions. Lesson contents will include links to background material and activities that teach observation recording, concept articulation, hypothesis formulation and testing, and

  12. A prototype framework for models of socio-hydrology: identification of key feedback loops and parameterisation approach

    Science.gov (United States)

    Elshafei, Y.; Sivapalan, M.; Tonts, M.; Hipsey, M. R.

    2014-06-01

    It is increasingly acknowledged that, in order to sustainably manage global freshwater resources, it is critical that we better understand the nature of human-hydrology interactions at the broader catchment system scale. Yet to date, a generic conceptual framework for building models of catchment systems that include adequate representation of socioeconomic systems - and the dynamic feedbacks between human and natural systems - has remained elusive. In an attempt to work towards such a model, this paper outlines a generic framework for models of socio-hydrology applicable to agricultural catchments, made up of six key components that combine to form the coupled system dynamics: namely, catchment hydrology, population, economics, environment, socioeconomic sensitivity and collective response. The conceptual framework posits two novel constructs: (i) a composite socioeconomic driving variable, termed the Community Sensitivity state variable, which seeks to capture the perceived level of threat to a community's quality of life, and acts as a key link tying together one of the fundamental feedback loops of the coupled system, and (ii) a Behavioural Response variable as the observable feedback mechanism, which reflects land and water management decisions relevant to the hydrological context. The framework makes a further contribution through the introduction of three macro-scale parameters that enable it to normalise for differences in climate, socioeconomic and political gradients across study sites. In this way, the framework provides for both macro-scale contextual parameters, which allow for comparative studies to be undertaken, and catchment-specific conditions, by way of tailored "closure relationships", in order to ensure that site-specific and application-specific contexts of socio-hydrologic problems can be accommodated. To demonstrate how such a framework would be applied, two socio-hydrological case studies, taken from the Australian experience, are presented

  13. Additive N-step Markov chains as prototype model of symbolic stochastic dynamical systems with long-range correlations

    Energy Technology Data Exchange (ETDEWEB)

    Mayzelis, Z.A. [Department of Physics, Kharkov National University, 4 Svoboda Sq., Kharkov 61077 (Ukraine); Apostolov, S.S. [Department of Physics, Kharkov National University, 4 Svoboda Sq., Kharkov 61077 (Ukraine); Melnyk, S.S. [A. Ya. Usikov Institute for Radiophysics and Electronics, Ukrainian Academy of Science, 12 Proskura Street, 61085 Kharkov (Ukraine); Usatenko, O.V. [A. Ya. Usikov Institute for Radiophysics and Electronics, Ukrainian Academy of Science, 12 Proskura Street, 61085 Kharkov (Ukraine)]. E-mail: usatenko@ire.kharkov.ua; Yampol' skii, V.A. [A. Ya. Usikov Institute for Radiophysics and Electronics, Ukrainian Academy of Science, 12 Proskura Street, 61085 Kharkov (Ukraine)

    2007-10-15

    A theory of symbolic dynamic systems with long-range correlations based on the consideration of the binary N-step Markov chains developed earlier in Phys Rev Lett 2003;90:110601 is generalized to the biased case (non-equal numbers of zeros and unities in the chain). In the model, the conditional probability that the ith symbol in the chain equals zero (or unity) is a linear function of the number of unities (zeros) among the preceding N symbols. The correlation and distribution functions as well as the variance of number of symbols in the words of arbitrary length L are obtained analytically and verified by numerical simulations. A self-similarity of the studied stochastic process is revealed and the similarity group transformation of the chain parameters is presented. The diffusion Fokker-Planck equation governing the distribution function of the L-words is explored. If the persistent correlations are not extremely strong, the distribution function is shown to be the Gaussian with the variance being nonlinearly dependent on L. An equation connecting the memory and correlation function of the additive Markov chain is presented. This equation allows reconstructing a memory function using a correlation function of the system. Effectiveness and robustness of the proposed method is demonstrated by simple model examples. Memory functions of concrete coarse-grained literary texts are found and their universal power-law behavior at long distances is revealed.

  14. Virtual Prototyping, Advanced Electric Systems, and Controls for Ships

    National Research Council Canada - National Science Library

    Dougal, Roger A

    2004-01-01

    .... 1) New capabilities for virtual prototyping of advanced electric systems were developed, with emphasis on simulation of uncertain systems, tools for rapid model development, realtime and distributed...

  15. Enumeration of viable and non-viable larvated Ascaris eggs with quantitative PCR.

    Science.gov (United States)

    Raynal, Maria; Villegas, Eric N; Nelson, Kara L

    2012-12-01

    The goal of this study was to further develop an incubation-quantitative polymerase chain reaction (qPCR) method for quantifying viable Ascaris eggs by characterizing the detection limit and number of template copies per egg, determining the specificity of the method, and testing the method with viable and inactivated larvated eggs. The number of template copies per cell was determined by amplifying DNA from known numbers of eggs at different development stages; the value was estimated to be 32 copies. The specificity of the method was tested against a panel of bacteria, fungi, protozoa and helminths, and no amplification was found with non-target DNA. Finally, fully larvated eggs were inactivated by four different treatments: 254 nm ultraviolet light, 2,000 ppm NH(3)-N at pH 9, moderate heat (48 °C) and high heat (70 °C). Concentrations of treated eggs were measured by direct microscopy and incubation-qPCR. The qPCR signal decreased following all four treatments, and was in general agreement with the decrease in viable eggs determined by microscopy. The incubation-qPCR method for enumerating viable Ascaris eggs is a promising approach that can produce results faster than direct microscopy, and may have benefits for applications such as assessing biosolids.

  16. Polymerase chain reaction-based discrimination of viable from non-viable Mycoplasma gallisepticum

    Directory of Open Access Journals (Sweden)

    Ching Giap Tan

    2014-02-01

    Full Text Available The present study was based on the reverse transcription polymerase chain reaction (RT-PCR of the 16S ribosomal nucleic acid (rRNA of Mycoplasma for detection of viable Mycoplasma gallisepticum. To determine the stability of M. gallisepticum 16S rRNA in vitro, three inactivation methods were used and the suspensions were stored at different temperatures. The 16S rRNA of M. gallisepticum was detected up to approximately 20–25 h at 37 °C, 22–25 h at 16 °C, and 23–27 h at 4 °C. The test, therefore, could detect viable or recently dead M. gallisepticum (< 20 h. The RT-PCR method was applied during an in vivo study of drug efficacy under experimental conditions, where commercial broiler-breeder eggs were inoculated with M. gallisepticum into the yolk. Hatched chicks that had been inoculated in ovo were treated with Macrolide 1. The method was then applied in a flock of day 0 chicks with naturally acquired vertical transmission of M. gallisepticum, treated with Macrolide 2. Swabs of the respiratory tract were obtained for PCR and RT-PCR evaluations to determine the viability of M. gallisepticum. This study proved that the combination of both PCR and RT-PCR enables detection and differentiation of viable from non-viable M. gallisepticum.

  17. Prototype ATLAS straw tracker

    CERN Multimedia

    Laurent Guiraud

    1998-01-01

    This is an early prototype of the straw tracking device for the ATLAS detector at CERN. This detector will be part of the LHC project, scheduled to start operation in 2008. The straw tracker will consist of thousands of gas-filled straws, each containing a wire, allowing the tracks of particles to be followed.

  18. Surrogates-based prototyping

    NARCIS (Netherlands)

    Du Bois, E.; Horvath, I.

    2014-01-01

    The research is situated in the system development phase of interactive software products. In this detailed design phase, we found a need for fast testable prototyping to achieve qualitative change proposals on the system design. In this paper, we discuss a literature study on current software

  19. LEP vacuum chamber, prototype

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    Final prototype for the LEP vacuum chamber, see 8305170 for more details. Here we see the strips of the NEG pump, providing "distributed pumping". The strips are made from a Zr-Ti-Fe alloy. By passing an electrical current, they were heated to 700 deg C.

  20. Rapid Prototyping in PVS

    Science.gov (United States)

    Munoz, Cesar A.; Butler, Ricky (Technical Monitor)

    2003-01-01

    PVSio is a conservative extension to the PVS prelude library that provides basic input/output capabilities to the PVS ground evaluator. It supports rapid prototyping in PVS by enhancing the specification language with built-in constructs for string manipulation, floating point arithmetic, and input/output operations.

  1. Rapid Prototyping Reconsidered

    Science.gov (United States)

    Desrosier, James

    2011-01-01

    Continuing educators need additional strategies for developing new programming that can both reduce the time to market and lower the cost of development. Rapid prototyping, a time-compression technique adapted from the high technology industry, represents one such strategy that merits renewed evaluation. Although in higher education rapid…

  2. Cost Effective Prototyping

    Science.gov (United States)

    Wickman, Jerry L.; Kundu, Nikhil K.

    1996-01-01

    This laboratory exercise seeks to develop a cost effective prototype development. The exercise has the potential of linking part design, CAD, mold development, quality control, metrology, mold flow, materials testing, fixture design, automation, limited parts production and other issues as related to plastics manufacturing.

  3. MPACT Fast Neutron Multiplicity System Prototype Development

    Energy Technology Data Exchange (ETDEWEB)

    D.L. Chichester; S.A. Pozzi; J.L. Dolan; M.T. Kinlaw; S.J. Thompson; A.C. Kaplan; M. Flaska; A. Enqvist; J.T. Johnson; S.M. Watson

    2013-09-01

    This document serves as both an FY2103 End-of-Year and End-of-Project report on efforts that resulted in the design of a prototype fast neutron multiplicity counter leveraged upon the findings of previous project efforts. The prototype design includes 32 liquid scintillator detectors with cubic volumes 7.62 cm in dimension configured into 4 stacked rings of 8 detectors. Detector signal collection for the system is handled with a pair of Struck Innovative Systeme 16-channel digitizers controlled by in-house developed software with built-in multiplicity analysis algorithms. Initial testing and familiarization of the currently obtained prototype components is underway, however full prototype construction is required for further optimization. Monte Carlo models of the prototype system were performed to estimate die-away and efficiency values. Analysis of these models resulted in the development of a software package capable of determining the effects of nearest-neighbor rejection methods for elimination of detector cross talk. A parameter study was performed using previously developed analytical methods for the estimation of assay mass variance for use as a figure-of-merit for system performance. A software package was developed to automate these calculations and ensure accuracy. The results of the parameter study show that the prototype fast neutron multiplicity counter design is very nearly optimized under the restraints of the parameter space.

  4. Towards Cloud-Resolving European-Scale Climate Simulations using a fully GPU-enabled Prototype of the COSMO Regional Model

    Science.gov (United States)

    Leutwyler, David; Fuhrer, Oliver; Cumming, Benjamin; Lapillonne, Xavier; Gysi, Tobias; Lüthi, Daniel; Osuna, Carlos; Schär, Christoph

    2014-05-01

    . We present our redesign and porting approach as well as our experience and lessons learned. Furthermore, we discuss relevant performance benchmarks obtained on the new hybrid Cray XC30 system "Piz Daint" installed at the Swiss National Supercomputing Centre (CSCS), both in terms of time-to-solution as well as energy consumption. We will demonstrate a first set of short cloud-resolving climate simulations at the European-scale using the GPU-enabled COSMO prototype and elaborate our future plans on how to exploit this new model capability.

  5. Comparison of human responses to prototype and standard uniforms using three different human simulation models: HSDA, Scenario_J and Simulink2NM

    National Research Council Canada - National Science Library

    Berglund, L. G; Yokota, M

    2005-01-01

    The human thermal physiological responses of Soldiers in three new prototype clothing systems under development were compared to responses in the current standard duty uniform (STDU) with body armor (BA...

  6. Design of the front end electronics for the infrared camera of JEM-EUSO, and manufacturing and verification of the prototype model

    Science.gov (United States)

    Maroto, Oscar; Diez-Merino, Laura; Carbonell, Jordi; Tomàs, Albert; Reyes, Marcos; Joven-Alvarez, Enrique; Martín, Yolanda; Morales de los Ríos, J. A.; del Peral, Luis; Rodríguez-Frías, M. D.

    2014-07-01

    The Japanese Experiment Module (JEM) Extreme Universe Space Observatory (EUSO) will be launched and attached to the Japanese module of the International Space Station (ISS). Its aim is to observe UV photon tracks produced by ultra-high energy cosmic rays developing in the atmosphere and producing extensive air showers. The key element of the instrument is a very wide-field, very fast, large-lense telescope that can detect extreme energy particles with energy above 1019 eV. The Atmospheric Monitoring System (AMS), comprising, among others, the Infrared Camera (IRCAM), which is the Spanish contribution, plays a fundamental role in the understanding of the atmospheric conditions in the Field of View (FoV) of the telescope. It is used to detect the temperature of clouds and to obtain the cloud coverage and cloud top altitude during the observation period of the JEM-EUSO main instrument. SENER is responsible for the preliminary design of the Front End Electronics (FEE) of the Infrared Camera, based on an uncooled microbolometer, and the manufacturing and verification of the prototype model. This paper describes the flight design drivers and key factors to achieve the target features, namely, detector biasing with electrical noise better than 100μV from 1Hz to 10MHz, temperature control of the microbolometer, from 10°C to 40°C with stability better than 10mK over 4.8hours, low noise high bandwidth amplifier adaptation of the microbolometer output to differential input before analog to digital conversion, housekeeping generation, microbolometer control, and image accumulation for noise reduction. It also shows the modifications implemented in the FEE prototype design to perform a trade-off of different technologies, such as the convenience of using linear or switched regulation for the temperature control, the possibility to check the camera performances when both microbolometer and analog electronics are moved further away from the power and digital electronics, and

  7. Prototype land-cover mapping of the Huascarán Biosphere Reserve (Peru) using a digital elevation model, and the NDSI and NDVI indices

    Science.gov (United States)

    Silverio, Walter; Jaquet, Jean-Michel

    2009-03-01

    On the basis of Landsat 7 ETM+ imagery, a prototype land-cover map was prepared for the Huascarán Biosphere Reserve (Peru). This document should contribute to the sustainable management of the Huascarán Biosphere Reserve, while making it possible to establish a regional planning policy and to prepare a natural risks map, which is still lacking in the region. The influence of the topography on radiometry was attenuated by using the normalized difference snow index (NDSI) and normalized difference vegetation index (NDVI), which were segmented using their histogram. A digital elevation model (DEM) was introduced to define the "highlands" and "lowlands". In the latter, the slope derived from the DEM was combined with the NDVI to map the agricultural surfaces. Twenty-one spectral classes were defined and their correspondence with land-cover themes was checked by field observations. The land-cover map provides original information on the extent of the glacial cover, debris-covered glaciers, 881 lakes, vegetation density, agricultural surfaces, urban zones and mines.

  8. The Application of Rapid Prototyping Technology and Quality Functional Deployment (QFD approach in enhancing the Endotracheal Tube Holder Model in Medical Application

    Directory of Open Access Journals (Sweden)

    Way Yusoff

    2015-01-01

    Full Text Available This paper presents a development of a current design the Endotracheal tube holding device. At present, the medical teams have faced a lot of problems when doing the endotracheal intubation. Misplacement of endotracheal tube into the esophagus and extubation due to patient’s movement are among the problems by surgeons during medical treatment. This is important as the successful management of the potential risk can reduce the number of patients who suffer a serious consequence of endtracheal tube therapy such as a potential risk to patient safety, with associated risks varying from minor complications to death. This paper presents a product design specification for endotracheal tube-holding device is translated from user’s requirements by employing Quality Functional Deployment (QFD. Several design concepts are generated by using CATIA software to be evaluated by endotracheal tube-holding device users for concept selection. Selection of design concept was done in two phases which are concept screening and concept scoring. For selecting the design concept for further development, a prototype of endotracheal tube was fabricated by using Fused Deposition Modelling (FDM.

  9. Extending a prototype knowledge and object based image analysis model to coarser spatial resolution imagery: an example from the Missouri River

    Science.gov (United States)

    Strong, Laurence L.

    2012-01-01

    A prototype knowledge- and object-based image analysis model was developed to inventory and map least tern and piping plover habitat on the Missouri River, USA. The model has been used to inventory the state of sandbars annually for 4 segments of the Missouri River since 2006 using QuickBird imagery. Interpretation of the state of sandbars is difficult when images for the segment are acquired at different river stages and different states of vegetation phenology and canopy cover. Concurrent QuickBird and RapidEye images were classified using the model and the spatial correspondence of classes in the land cover and sandbar maps were analysed for the spatial extent of the images and at nest locations for both bird species. Omission and commission errors were low for unvegetated land cover classes used for nesting by both bird species and for land cover types with continuous vegetation cover and water. Errors were larger for land cover classes characterized by a mixture of sand and vegetation. Sandbar classification decisions are made using information on land cover class proportions and disagreement between sandbar classes was resolved using fuzzy membership possibilities. Regression analysis of area for a paired sample of 47 sandbars indicated an average positive bias, 1.15 ha, for RapidEye that did not vary with sandbar size. RapidEye has potential to reduce temporal uncertainty about least tern and piping plover habitat but would not be suitable for mapping sandbar erosion, and characterization of sandbar shapes or vegetation patches at fine spatial resolution.

  10. Extending a prototype knowledge- and object-based image analysis model to coarser spatial resolution imagery: an example from the Missouri River

    Science.gov (United States)

    Strong, Laurence L.

    2012-01-01

    A prototype knowledge- and object-based image analysis model was developed to inventory and map least tern and piping plover habitat on the Missouri River, USA. The model has been used to inventory the state of sandbars annually for 4 segments of the Missouri River since 2006 using QuickBird imagery. Interpretation of the state of sandbars is difficult when images for the segment are acquired at different river stages and different states of vegetation phenology and canopy cover. Concurrent QuickBird and RapidEye images were classified using the model and the spatial correspondence of classes in the land cover and sandbar maps were analysed for the spatial extent of the images and at nest locations for both bird species. Omission and commission errors were low for unvegetated land cover classes used for nesting by both bird species and for land cover types with continuous vegetation cover and water. Errors were larger for land cover classes characterized by a mixture of sand and vegetation. Sandbar classification decisions are made using information on land cover class proportions and disagreement between sandbar classes was resolved using fuzzy membership possibilities. Regression analysis of area for a paired sample of 47 sandbars indicated an average positive bias, 1.15 ha, for RapidEye that did not vary with sandbar size. RapidEye has potential to reduce temporal uncertainty about least tern and piping plover habitat but would not be suitable for mapping sandbar erosion, and characterization of sandbar shapes or vegetation patches at fine spatial resolution.

  11. Deletion of ultraconserved elements yields viable mice

    Energy Technology Data Exchange (ETDEWEB)

    Ahituv, Nadav; Zhu, Yiwen; Visel, Axel; Holt, Amy; Afzal, Veena; Pennacchio, Len A.; Rubin, Edward M.

    2007-07-15

    Ultraconserved elements have been suggested to retainextended perfect sequence identity between the human, mouse, and ratgenomes due to essential functional properties. To investigate thenecessities of these elements in vivo, we removed four non-codingultraconserved elements (ranging in length from 222 to 731 base pairs)from the mouse genome. To maximize the likelihood of observing aphenotype, we chose to delete elements that function as enhancers in amouse transgenic assay and that are near genes that exhibit markedphenotypes both when completely inactivated in the mouse as well as whentheir expression is altered due to other genomic modifications.Remarkably, all four resulting lines of mice lacking these ultraconservedelements were viable and fertile, and failed to reveal any criticalabnormalities when assayed for a variety of phenotypes including growth,longevity, pathology and metabolism. In addition more targeted screens,informed by the abnormalities observed in mice where genes in proximityto the investigated elements had been altered, also failed to revealnotable abnormalities. These results, while not inclusive of all thepossible phenotypic impact of the deleted sequences, indicate thatextreme sequence constraint does not necessarily reflect crucialfunctions required for viability.

  12. Is Greenberg's "Macro-Carib" viable?

    Directory of Open Access Journals (Sweden)

    Spike Gildea

    Full Text Available In his landmark work Language in the Americas, Greenberg (1987 proposed that Macro-Carib was one of the major low-level stocks of South America, which together with Macro-Panoan and Macro-Ge-Bororo were claimed to comprise the putative Ge-Pano-Carib Phylum. His Macro-Carib includes the isolates Andoke and Kukura, and the Witotoan, Peba-Yaguan, and Cariban families. Greenberg's primary evidence came from person-marking paradigms in individual languages, plus scattered words from individual languages collected into 79 Macro-Carib 'etymologies' and another 64 Amerind 'etymologies'. The goal of this paper is to re-evaluate Greenberg's Macro-Carib claim in the light of the much more extensive and reliable language data that has become available largely since 1987. Based on full person-marking paradigms for Proto-Cariban, Yagua, Bora and Andoke, we conclude that Greenberg's morphological claims are unfounded. For our lexical comparison, we created lexical lists for Proto-Cariban, Proto-Witotoan, Yagua and Andoke, for both Greenberg's 143 putative etymologies and for the Swadesh 100 list. From both lists, a total of 23 potential cognates were found, but no consonantal correspondences were repeated even once. We conclude that our greatly expanded and improved database does not provide sufficient evidence to convince the skeptic that the Macro-Carib hypothesis is viable

  13. Economically viable large-scale hydrogen liquefaction

    Science.gov (United States)

    Cardella, U.; Decker, L.; Klein, H.

    2017-02-01

    The liquid hydrogen demand, particularly driven by clean energy applications, will rise in the near future. As industrial large scale liquefiers will play a major role within the hydrogen supply chain, production capacity will have to increase by a multiple of today’s typical sizes. The main goal is to reduce the total cost of ownership for these plants by increasing energy efficiency with innovative and simple process designs, optimized in capital expenditure. New concepts must ensure a manageable plant complexity and flexible operability. In the phase of process development and selection, a dimensioning of key equipment for large scale liquefiers, such as turbines and compressors as well as heat exchangers, must be performed iteratively to ensure technological feasibility and maturity. Further critical aspects related to hydrogen liquefaction, e.g. fluid properties, ortho-para hydrogen conversion, and coldbox configuration, must be analysed in detail. This paper provides an overview on the approach, challenges and preliminary results in the development of efficient as well as economically viable concepts for large-scale hydrogen liquefaction.

  14. Ceramic microfabrication by rapid prototyping process chains

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    fast and inexpensive supply for polymer master models and a ceramic shaping method that enables the replication of the RP model into multiple ceramic materials within a short time. (Knitter et al 1999). 2. Rapid prototyping process chains. The manufacturing of ceramic microparts presented here set out with the 3D-CAD ...

  15. Ceramic microfabrication by rapid prototyping process chains

    Indian Academy of Sciences (India)

    To avoid high tooling costs in product development, a rapid prototyping process chain has been established that enables rapid manufacturing of ceramic microcomponents from functional models to small lot series within a short time. This process chain combines the fast and inexpensive supply of master models by rapid ...

  16. Parejas viables que perduran en el tiempo

    Directory of Open Access Journals (Sweden)

    Juan José Cuervo Rodríguez

    2013-01-01

    Full Text Available El presente artículo científico presenta resultados del proceso llevado a cabo en el proyecto de investigación docente "Mecanismos de autorregulación en parejas viables que perduran en el tiempo". Se soporta en una mirada compleja de la psicología basada en una epistemología de la construcción. En el ámbito metodológico, se inscribe en los estudios de terapia familiar desde una perspectiva de la comunicación humana como un todo integrado. Participaron nueve parejas. Los criterios de inclusión fueron: cinco o más años de convivencia, participación voluntaria, no presentar (ni haber presentado problemáticas especiales que ameriten intervención psicoterapéutica y la obtención de un porcentaje significativo en el uso de estrategias de comunicación asertiva en la resolución de conflictos. El método general utilizado fue el análisis de la comunicación en tarea de conversación. Los principales hallazgos señalan una estrecha relación entre el contexto de desarrollo de las parejas, la emergencia de códigos comunicacionales propios y la posibilidad de perdurar en el tiempo; también, se resalta el tipo de comunicación asertiva o constructiva, la construcción de valores como el respeto y la aceptación de las diferencias, y el deseo por vivir y construir bienestar común, como elementos constitutivos de su identidad como pareja.

  17. A prototype analysis of vengeance

    NARCIS (Netherlands)

    Elshout, Maartje; Nelissen, Rob; van Beest, Ilja

    2015-01-01

    The authors examined the concept of vengeance from a prototype perspective. In 6 studies, the prototype structure of vengeance was mapped. Sixty-nine features of vengeance were identified (Study 1), and rated on centrality (Study 2). Further studies confirmed the prototype structure. Compared to

  18. Prototype repository - Microbes in the retrieved outer section

    Energy Technology Data Exchange (ETDEWEB)

    Arlinger, Johanna; Bengtsson, Andreas; Edlund, Johanna; Eriksson, Lena; Johansson, Jessica; Lydmark, Sara; Rabe, Lisa; Pedersen, Karsten [Microbial Analytics Sweden, Moelnlycke (Sweden)

    2013-10-15

    The Prototype repository is an international project to build and study a full-scale model of the planned Swedish final repository for spent nuclear fuel. The Prototype consists of two sections with four and two full-scale copper canisters, respectively. In 2011, the outer section with two canisters (nos. 5 and 6) was excavated. Groundwater surrounding the Prototype has been demonstrated to include microorganisms such as iron-reducing bacteria (IRB) and sulphate-reducing bacteria (SRB) with the ability to affect the repository through reduction of structural Fe(III) in the buffer or by the production of sulphide, respectively. During excavation, samples were taken for microbiological and molecular biological analysis from backfill, buffer, and canister surfaces and analysed with an emphasis on microbial presence and number. The underground environment is anaerobic, but the construction of a repository will raise the oxygen levels. Oxygen is not favourable for the longevity of the copper canister, but oxygen levels will decrease over time, partly due to microbial activity that consumes oxygen. Therefore, evaluating the presence and numbers of the heterotrophic aerobic bacteria that consume oxygen as well as monitoring the oxygen levels are important. The oxygen content of the bentonite itself is also a primary concern, and a method for measuring how the oxygen diffuses through the clay has long been needed. In the work reported here, we performed two pilot studies to address this need. One of these studies tested a method for differentiating between oxygen saturation in aerobic versus anaerobic bentonite; this method has potential for further development. The tunnel above the Prototype canisters was backfilled with a mixture of bentonite and crushed rock. Sixty-three randomly chosen samples from a cross-section through the backfill were analysed for culturable heterotrophic aerobic bacteria. All but one exhibited growth, with four samples exhibiting numbers over 106

  19. MITRE sensor layer prototype

    Science.gov (United States)

    Duff, Francis; McGarry, Donald; Zasada, David; Foote, Scott

    2009-05-01

    The MITRE Sensor Layer Prototype is an initial design effort to enable every sensor to help create new capabilities through collaborative data sharing. By making both upstream (raw) and downstream (processed) sensor data visible, users can access the specific level, type, and quantities of data needed to create new data products that were never anticipated by the original designers of the individual sensors. The major characteristic that sets sensor data services apart from typical enterprise services is the volume (on the order of multiple terabytes) of raw data that can be generated by most sensors. Traditional tightly coupled processing approaches extract pre-determined information from the incoming raw sensor data, format it, and send it to predetermined users. The community is rapidly reaching the conclusion that tightly coupled sensor processing loses too much potentially critical information.1 Hence upstream (raw and partially processed) data must be extracted, rapidly archived, and advertised to the enterprise for unanticipated uses. The authors believe layered sensing net-centric integration can be achieved through a standardize-encapsulate-syndicateaggregate- manipulate-process paradigm. The Sensor Layer Prototype's technical approach focuses on implementing this proof of concept framework to make sensor data visible, accessible and useful to the enterprise. To achieve this, a "raw" data tap between physical transducers associated with sensor arrays and the embedded sensor signal processing hardware and software has been exploited. Second, we encapsulate and expose both raw and partially processed data to the enterprise within the context of a service-oriented architecture. Third, we advertise the presence of multiple types, and multiple layers of data through geographic-enabled Really Simple Syndication (GeoRSS) services. These GeoRSS feeds are aggregated, manipulated, and filtered by a feed aggregator. After filtering these feeds to bring just the type

  20. Rapid Prototyping: Technologies, Materials and Advances

    Directory of Open Access Journals (Sweden)

    Dudek P.

    2016-06-01

    Full Text Available In the context of product development, the term rapid prototyping (RP is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

  1. Design and prototyping of micro centrifugal compressor

    Science.gov (United States)

    Mizuki, Shimpei; Minorikawa, Gaku; Hirano, Toshiyuki; Asaga, Yuichiro; Yamaguchi, Naoki; Ohta, Yutaka; Outa, Eisuke

    2003-02-01

    In order to establish the design methodology of ultra micro centrifugal compressor, which is the most important component of ultra micro gas turbine unit, a 10 times of the final target size model was designed, prototyped and tested. The problems to be solved for downsizing were examined and 2-dimensional impeller was chosen as the first model due to its productivity. The conventional 1D prediction method, CFD and the inverse design were attempted. The prototyped compressor was driven by using a turbocharger and the performance characteristics were measured.

  2. SXI Prototype mirror mount

    Science.gov (United States)

    1995-01-01

    This final report describes the work performed from June 1993 to January 1995. The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule.

  3. Generalizing Prototype Theory: A Formal Quantum Framework

    Science.gov (United States)

    Aerts, Diederik; Broekaert, Jan; Gabora, Liane; Sozzo, Sandro

    2016-01-01

    Theories of natural language and concepts have been unable to model the flexibility, creativity, context-dependence, and emergence, exhibited by words, concepts and their combinations. The mathematical formalism of quantum theory has instead been successful in capturing these phenomena such as graded membership, situational meaning, composition of categories, and also more complex decision making situations, which cannot be modeled in traditional probabilistic approaches. We show how a formal quantum approach to concepts and their combinations can provide a powerful extension of prototype theory. We explain how prototypes can interfere in conceptual combinations as a consequence of their contextual interactions, and provide an illustration of this using an intuitive wave-like diagram. This quantum-conceptual approach gives new life to original prototype theory, without however making it a privileged concept theory, as we explain at the end of our paper. PMID:27065436

  4. Generalizing Prototype Theory: A Formal Quantum Framework

    Directory of Open Access Journals (Sweden)

    Diederik eAerts

    2016-03-01

    Full Text Available Theories of natural language and concepts have been unable to model the flexibility, creativity, context-dependence, and emergence, exhibited by words, concepts and their combinations. The mathematical formalism of quantum theory has instead been successful in capturing these phenomena such as graded membership, situational meaning, composition of categories, and also more complex decision making situations, which cannot be modeled in traditional probabilistic approaches. We show how a formal quantum approach to concepts and their combinations can provide a powerful extension of prototype theory. We explain how prototypes can interfere in conceptual combinations as a consequence of their contextual interactions, and provide an illustration of this using an intuitive wave-like diagram. This quantum-conceptual approach gives new life to original prototype theory, without however making it a privileged concept theory, as we explain at the end of our paper.

  5. Generalizing Prototype Theory: A Formal Quantum Framework.

    Science.gov (United States)

    Aerts, Diederik; Broekaert, Jan; Gabora, Liane; Sozzo, Sandro

    2016-01-01

    Theories of natural language and concepts have been unable to model the flexibility, creativity, context-dependence, and emergence, exhibited by words, concepts and their combinations. The mathematical formalism of quantum theory has instead been successful in capturing these phenomena such as graded membership, situational meaning, composition of categories, and also more complex decision making situations, which cannot be modeled in traditional probabilistic approaches. We show how a formal quantum approach to concepts and their combinations can provide a powerful extension of prototype theory. We explain how prototypes can interfere in conceptual combinations as a consequence of their contextual interactions, and provide an illustration of this using an intuitive wave-like diagram. This quantum-conceptual approach gives new life to original prototype theory, without however making it a privileged concept theory, as we explain at the end of our paper.

  6. Mechanical Prototyping and Manufacturing Internship

    Science.gov (United States)

    Grenfell, Peter

    2016-01-01

    The internship was located at the Johnson Space Center (JSC) Innovation Design Center (IDC), which is a facility where the JSC workforce can meet and conduct hands-on innovative design, fabrication, evaluation, and testing of ideas and concepts relevant to NASA's mission. The tasks of the internship included mechanical prototyping design and manufacturing projects in service of research and development as well as assisting the users of the IDC in completing their manufacturing projects. The first project was to manufacture hatch mechanisms for a team in the Systems Engineering and Project Advancement Program (SETMAP) hexacopter competition. These mechanisms were intended to improve the performance of the servomotors and offer an access point that would also seal to prevent cross-contamination. I also assisted other teams as they were constructing and modifying their hexacopters. The success of this competition demonstrated a proof of concept for aerial reconnaissance and sample return to be potentially used in future NASA missions. I also worked with Dr. Kumar Krishen to prototype an improved thermos and a novel, portable solar array. Computer-aided design (CAD) software was used to model the parts for both of these projects. Then, 3D printing as well as conventional techniques were used to produce the parts. These prototypes were then subjected to trials to determine the success of the designs. The solar array is intended to work in a cluster that is easy to set up and take down and doesn't require powered servomechanisms. It could be used terrestrially in areas not serviced by power grids. Both projects improve planetary exploration capabilities to future astronauts. Other projects included manufacturing custom rail brackets for EG-2, assisting engineers working on underwater instrument and tool cases for the NEEMO project, and helping to create mock-up parts for Space Center Houston. The use of the IDC enabled efficient completion of these projects at

  7. Prototypes as Platforms for Participation

    DEFF Research Database (Denmark)

    Horst, Willem

    The development of interactive products in industry is an activity involving different disciplines – such as different kinds of designers, engineers, marketers and managers – in which prototypes play an important role. On the one hand, prototypes can be powerful boundary objects and an effective.......g. interaction designers, are in a position to design it in a way that enables and encourages different stakeholders to take ownership over it. This dissertation consists of a collection of five papers in which I introduce a collaborative approach to prototyping, and describe how designers can design prototypes...... of prototyping, and develop a sense of ownership over the prototype. This has several benefits for the interaction designer. Since participants learn about the design space and limitations of the prototype, they are able to give specific feedback and input, which the interaction designer can implement. Moreover...

  8. Prototyping Augmented Reality

    CERN Document Server

    Mullen, Tony

    2011-01-01

    Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

  9. AMS Prototyping Activities

    Science.gov (United States)

    Burleigh, Scott

    2008-01-01

    This slide presentation reviews the activity around the Asynchronous Message Service (AMS) prototype. An AMS reference implementation has been available since late 2005. It is aimed at supporting message exchange both in on-board environments and over space links. The implementation incoroporates all mandatory elements of the draft recommendation from July 2007: (1) MAMS, AMS, and RAMS protocols. (2) Failover, heartbeats, resync. (3) "Hooks" for security, but no cipher suites included in the distribution. The performance is reviewed, and a Benchmark latency test over VxWorks Message Queues is shown as histograms of a count vs microseconds per 1000-byte message

  10. Nightshade Prototype Experiments (Silverleaf)

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, Jeremy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bauer, Amy L. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-23

    The Red Sage campaign is a series of subcritical dynamic plutonium experiments designed to measure ejecta. Nightshade, the first experiments in Red Sage scheduled for fiscal year 2019, will measure the amount of ejecta emission into vacuum from a double-­shocked plutonium surface. To address the major technical risks in Nightshade, a Level 2 milestone was developed for fiscal year 2016. Silverleaf, a series of four experiments, was executed at the Los Alamos National Laboratory in July and August 2016 to demonstrate a prototype of the Nightshade package and to satisfy this Level 2 milestone. This report is documentation that Red Sage Level 2 milestone requirements were successfully met.

  11. DataCollection Prototyping

    CERN Multimedia

    Beck, H.P.

    DataCollection is a subsystem of the Trigger, DAQ & DCS project responsible for the movement of event data from the ROS to the High Level Triggers. This includes data from Regions of Interest (RoIs) for Level 2, building complete events for the Event Filter and finally transferring accepted events to Mass Storage. It also handles passing the LVL1 RoI pointers and the allocation of Level 2 processors and load balancing of Event Building. During the last 18 months DataCollection has developed a common architecture for the hardware and software required. This involved a radical redesign integrating ideas from separate parts of earlier TDAQ work. An important milestone for this work, now achieved, has been to demonstrate this subsystem in the so-called Phase 2A Integrated Prototype. This prototype comprises the various TDAQ hardware and software components (ROSs, LVL2, etc.) under the control of the TDAQ Online software. The basic functionality has been demonstrated on small testbeds (~8-10 processing nodes)...

  12. Live Piloting and Prototyping

    Directory of Open Access Journals (Sweden)

    Francesca Rizzo

    2013-07-01

    Full Text Available This paper presents current trends in service design research concerning large scale projects aimed at generating changes at a local scale. The strategy adopted to achieve this, is to co-design solutions including future users in the development process, prototyping and testing system of products and services before their actual implementation. On the basis of experience achieved in the European Project Life 2.0, this paper discusses which methods and competencies are applied in the development of these projects, eliciting the lessons learnt especially from the piloting phase in which the participatory design (PD approach plays a major role. In the first part, the topic is introduced jointly with the theoretical background where the user center design and participatory design methods are presented; then the Life 2.0 project development is described; finally the experience is discussed from a service design perspective, eliciting guidelines for piloting and prototyping services in a real context of use. The paper concludes reflecting on the designers’ role and competencies needed in this process.

  13. MODEL SIMULATION OF GEOMETRY AND STRESS-STRAIN VARIATION OF BATAN FUEL PIN PROTOTYPE DURING IRRADIATION TEST IN RSG-GAS REACTOR

    Directory of Open Access Journals (Sweden)

    Suwardi Suwardi

    2015-03-01

    Full Text Available MODEL SIMULATION OF GEOMETRY AND STRESS-STRAIN VARIATION OF BATAN FUEL PIN PROTOTYPE DURING IRRADIATION TEST IN RSG-GAS REACTOR*. The first short fuel pin containing natural UO2 pellet in Zry4 cladding has been prepared at the CNFT (Center for Nuclear Fuel Technology then a ramp test will be performed. The present work is part of designing first irradiation experiments in the PRTF (Power Ramp Test Facility of RSG-GAS 30 MW reactor. The thermal mechanic of the pin during irradiation has simulated. The geometry variation of pellet and cladding is modeled by taking into account different phenomena such as thermal expansion, densification, swelling by fission product, thermal creep and radiation growth. The cladding variation is modeled by thermal expansion, thermal and irradiation creeps. The material properties are modeled by MATPRO and standard numerical parameter of TRANSURANUS code. Results of irradiation simulation with 9 kW/m LHR indicates that pellet-clad contacts onset from 0.090 mm initial gaps after 806 d, when pellet radius expansion attain 0.015 mm while inner cladding creep-down 0.075 mm. A newer computation data show that the maximum measured LHR of n-UO2 pin in the PRTF 12.4 kW/m. The next simulation will be done with a higher LHR, up to ~ 25 kW/m. MODEL SIMULASI VARIASI GEOMETRI DAN STRESS-STRAIN DARI PROTOTIP BAHAN BAKAR PIN BATAN SELAMA UJI IRADIASI DI REAKTOR RSG-GAS. Pusat Teknologi Bahan Bakar Nuklir (PTBBN telah menyiapkan tangkai (pin bahan bakar pendek perdana yang berisi pelet UO2 alam dalam kelongsong paduan zircaloy untuk dilakukan uji iradiasi daya naik. Penelitian ini merupakan bagian dari perancangan percobaan iradiasi pertama di PRTF (Power Ramp Test Fasility yang terpasang di reaktor serbaguna RSG-GAS berdaya 30 MW. Telah dilakukan pemodelan dan simulasi kinerja termal mekanikal pin selama iradiasi. Variasi geometri pelet dan kelongsong selama pengujian dimodelkan dengan memperhatikan fenomena ekspansi termal

  14. Asouzu's Complementary Ontology as a Foundation for a Viable ...

    African Journals Online (AJOL)

    This paper on “Asouzu's Complementary Ontology as a foundation for a viable Ethic of the Environment”, posits that an ethic of the environment can be seen as viable if it considers the whole of reality as ontologically relevant. This point of view would free environmental ethics of anthropocentric bias and its attendant ...

  15. Architectural Prototyping in Industrial Practice

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2008-01-01

    , in addressing issues regarding quality attributes, in addressing architectural risks, and in addressing the problem of knowledge transfer and conformance. Little work has been reported so far on the actual industrial use of architectural prototyping. In this paper, we report from an ethnographical study...... prototypes include end-user or business related functionality rather than purely architectural functionality. Based on these observations we provide recommendations for effective industrial architectural prototyping....

  16. Virtual Prototyping through Co-simulation of a Cartesian Plotter

    NARCIS (Netherlands)

    Groothuis, M.A.; Damstra, A.S.; Broenink, Johannes F.

    This paper shows a model-based design trajectory for the development of real-time embedded control software using virtual prototyping. As a test case, a Cartesian plotter is designed. Functional correctness of the plotter software has been ensured by means of co-simulation using a virtual prototype

  17. Context-descriptive Prototypes and Their Application to Medicine Administration

    DEFF Research Database (Denmark)

    Bossen, Claus; Jørgensen, Jens Bæk

    2004-01-01

    A context-descriptive prototype is an interactive graphical animation, driven by a formal, executable engine, implemented in some programming or modelling language. The two main properties of a context-descriptive prototype are: (1) it is an integrated description that describes system, work...

  18. Performance of Wind Pump Prototype | Bayray | Momona Ethiopian ...

    African Journals Online (AJOL)

    A wind pump prototype with 3.6 m rotor diameter, 19 m hub height above ground and 0.22 mm reciprocating pump stroke has been developed at the Department of Mechanical Engineering, Mekelle University. The prototype was designed and manufactured locally. Theoretical model based on combined efficiency of the ...

  19. Prototype Stilbene Neutron Collar

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, M. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shumaker, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Snyderman, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Verbeke, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wong, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-10-26

    A neutron collar using stilbene organic scintillator cells for fast neutron counting is described for the assay of fresh low enriched uranium (LEU) fuel assemblies. The prototype stilbene collar has a form factor similar to standard He-3 based collars and uses an AmLi interrogation neutron source. This report describes the simulation of list mode neutron correlation data on various fuel assemblies including some with neutron absorbers (burnable Gd poisons). Calibration curves (doubles vs 235U linear mass density) are presented for both thermal and fast (with Cd lining) modes of operation. It is shown that the stilbene collar meets or exceeds the current capabilities of He-3 based neutron collars. A self-consistent assay methodology, uniquely suited to the stilbene collar, using triples is described which complements traditional assay based on doubles calibration curves.

  20. The MONOLITH prototype

    CERN Document Server

    Ambrosio, M; Bencivenni, G; Candela, A M; Chiarini, A; Chignoli, F; De Deo, M; D'Incecco, M; Gerli, S; Giusti, P; Gómez, F; Gustavino, C; Lindozzi, M; Mannocchi, G; Menghetti, H; Morello, C; Murtas, F; Paoluzzi, G; Pilastrini, R; Redaelli, N G; Santoni, M; Sartorelli, G; Terranova, F; Trinchero, G C

    2000-01-01

    MONOLITH (Massive Observatory for Neutrino Oscillation or LImits on THeir existence) is the project of an experiment to study atmospheric neutrino oscillations with a massive magnetized iron detector. The baseline option is a 34 kt iron detector based on the use of about 50000 m/sup 2/ of the glass Resistive Plate Chambers (glass RPCs) developed at the Laboratori Nazionali del Gran Sasso (LNGS). An 8 ton prototype equipped with 23 m/sup 2/ of glass RPC has been realized and tested at the T7-PS beam at CERN. The energy resolution for pions follows a 68%/ square root (E(GeV))+2% law for orthogonally incident particles, in the energy range between 2 and 10 GeV. The time resolution and the tracking capability of the glass RPC are suitable for the MONOLITH experiment. (7 refs).

  1. Naval Prototype Optical Interferometer (NPOI)

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Used for astrometry and astronomical imaging, the Naval Prototype Optical Interferometer (NPOI) is a distributed aperture optical telescope. It is operated...

  2. Mobile prototyping with Axure 7

    CERN Document Server

    Hacker, Will

    2013-01-01

    This book is a step-by-step tutorial which includes hands-on examples and downloadable Axure files to get you started with mobile prototyping immediately. You will learn how to develop an application from scratch, and will be guided through each and every step.If you are a mobile-centric developer/designer, or someone who would like to take their Axure prototyping skills to the next level and start designing and testing mobile prototypes, this book is ideal for you. You should be familiar with prototyping and Axure specifically, before you read this book.

  3. Gendering models of leading academic performance (LAP): The role of social identity, prototypicality and social identity performance in female academic careers.

    OpenAIRE

    Serghini Idrissi, Aïcha; Garcia-Prieto Sol, Patricia

    2009-01-01

    In this paper we argue that Leading Academic Performance (LAP) expectations in universities are gendered, hindering female academic leadership. Integrating concepts from social identity theory of leadership, prototypicality, and social identity performance we describe how evaluations of female academic performance are shaped by gender social identity negatively affecting the career advancement of female faculty. We then illustrate how female academics can perform their academic and/or female ...

  4. The elusive minimum viable population size for white sturgeon

    Energy Technology Data Exchange (ETDEWEB)

    Jager, Yetta [ORNL; Lepla, Ken B. [Idaho Power Company; Van Winkle, Webb [Van Windle Environmental Consulting; James, Mr Brad [Washington Department of Fish and Wildlife; McAdam, Dr Steve [University of British Columbia, Vancouver

    2010-01-01

    Biological conservation of sturgeon populations is a concern for many species. Those responsible for managing the white sturgeon (Acipenser transmontanus) and similar species are interested in identifying extinction thresholds to avoid. Two thresholds that exist in theory are the minimum viable population size (MVP) and minimum amount of suitable habitat. In this paper, we present both model and empirical estimates of these thresholds. We modified a population viability analysis (PVA) model for white sturgeon to include two new Allee mechanisms. Despite this, PVA-based MVP estimates were unrealistically low compared with empirical estimates unless opportunities for spawning were assumed to be less frequent. PVA results revealed a trade-off between MVP and habitat thresholds; smaller populations persisted in longer river segments and vice versa. Our empirical analyses suggested (1) a MVP range based on population trends from 1,194 to 27,700 individuals, and (2) a MVP estimate of 4,000 individuals based on recruitment. Long-term historical population surveys are needed for more populations to pinpoint an MVP based on trends, whereas the available data were sufficient to estimate MVP based on recruitment. Beyond the MVP, we developed a hierarchical model for population status based on empirical data. Metapopulation support was the most important predictor of population health, followed by the length of free-flowing habitat, with habitat thresholds at 26 and 150 km. Together, these results suggest that habitat and connectivity are important determinants of population status that likely influence the site-specific MVP thresholds.

  5. The effects of sleep deprivation on dissociable prototype learning systems.

    Science.gov (United States)

    Maddox, W Todd; Glass, Brian D; Zeithamova, Dagmar; Savarie, Zachary R; Bowen, Christopher; Matthews, Michael D; Schnyer, David M

    2011-03-01

    The cognitive neural underpinnings of prototype learning are becoming clear. Evidence points to 2 different neural systems, depending on the learning parameters. A/not-A (AN) prototype learning is mediated by posterior brain regions that are involved in early perceptual learning, whereas A/B (AB) is mediated by frontal and medial temporal lobe regions. To investigate the effects of sleep deprivation on AN and AB prototype learning and to use established prototype models to provide insights into the cognitive-processing locus of sleep-deprivation deficits. Participants performed an AN and an AB prototype learning task twice, separated by a 24-hour period, with or without sleep between testing sessions. Eighteen West Point cadets participated in the sleep-deprivation group, and 17 West Point cadets participated in a control group. Sleep deprivation led to an AN, but not an AB, performance deficit. Prototype model analyses indicated that the AN deficit was due to changes in attentional focus and a decrease in confidence that is reflected in an increased bias to respond non-A. The findings suggest that AN, but not AB, prototype learning is affected by sleep deprivation. Prototype model analyses support the notion that the effect of sleep deprivation on AN is consistent with lapses in attentional focus that are more detrimental to AN than to AB. This finding adds to a growing body of work that suggests that different performance changes associated with sleep deprivation can be attributed to a common mechanism of changes in simple attention and vigilance.

  6. Model for the evaluation of the development urban in new zones of growth, University and Viable City; Modelo para la evaluacion del desarrollo urabno en nuevas zonas de crecimiento, Universidad y Ciudad Sustentable

    Energy Technology Data Exchange (ETDEWEB)

    Pena, B. L.

    2008-07-01

    A method for evaluating urban development is exposed departing from the complex systems theory and applying different indicators that measure the existing urban impact and the prospective entailment towards the new developing zone for the city and the university. Four subsystems are considered: the natural, the urban, socioeconomic and the university one, offering a prospective or alternative vision. this model allows to measure and evaluate the impact of the future growth by means of alternative systems of mobility, conservation of natural resources and the bio climatic urban design when reducing the energy consumption and assuring measures for maintained growth in the locality. (Author)

  7. Window prototypes during the project

    DEFF Research Database (Denmark)

    Schultz, Jørgen Munthe

    1996-01-01

    The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described.......The conditions for the PASSYS test and the results of the measurements on one of the aerogel window prototypes are described....

  8. Rapid prototyping in medical sciences

    Directory of Open Access Journals (Sweden)

    Ákos Márk Horváth

    2015-09-01

    Full Text Available Even if it sound a bit incredible rapid prototyping (RPT as production method has been used for decades in other professions. Nevertheless medical science just started discover the possibilities of this technology and use the offered benefits of 3D printing. In this paper authors have investigated the pharmaceutical usage of rapid prototyping.

  9. LISA phasemeter development: Advanced prototyping

    Energy Technology Data Exchange (ETDEWEB)

    Bykov, Iouri; Delgado, Juan Jose Esteban; Garcia Marin, Antonio Francisco; Heinzel, Gerhard; Danzmann, Karsten, E-mail: Iouri.bykov@aei.mpg.d [Institute for Gravitational Physics of the Leibniz University Hannover and Max Planck Institute for Gravitational Physics (Albert Einstein Institute) (Germany)

    2009-03-01

    We present the status of our investigations on the LISA Phasemeter. The new prototype is based on a custom-designed breadboard with four high-speed ADC and two DAC channels, extended readout capabilities and a large FPGA (field programmable gate array). The required main functionalities and performance of the prototype have been demonstrated in laboratory conditions.

  10. COGNITIVE PROTOTYPE AS A DATA STRUCTURE FOR COGNITIVE STRUCTURES STORING

    Directory of Open Access Journals (Sweden)

    O. A. Ryzhov

    2016-06-01

    Full Text Available The analysis of formal models of knowledge representaion in human minds allowed us to forge a definition of two new concepts: cognitive prototype (CP as a processable and flexible data structure for representing models of cognitive structures (CS in computer environment and knowledge base (KB of IES based on CPs as a UML-model to storage and further process the content of educational courses based on cognitive prototypes.

  11. UA1 prototype detector

    CERN Document Server

    1980-01-01

    Prototype of UA1 central detector inside a plexi tube. The UA1 experiment ran at CERN's Super Proton Synchrotron and made the Nobel Prize winning discovery of W and Z particles in 1983. The UA1 central detector was crucial to understanding the complex topology of proton-antiproton events. It played a most important role in identifying a handful of Ws and Zs among billions of collisions. The detector was essentially a wire chamber - a 6-chamber cylindrical assembly 5.8 m long and 2.3 m in diameter, the largest imaging drift chamber of its day. It recorded the tracks of charged particles curving in a 0.7 Tesla magnetic field, measuring their momentum, the sign of their electric charge and their rate of energy loss (dE/dx). Atoms in the argon-ethane gas mixture filling the chambers were ionised by the passage of charged particles. The electrons which were released drifted along an electric field shaped by field wires and were collected on sense wires. The geometrical arrangement of the 17000 field wires and 6...

  12. Space Warfighting Construct: Prototyping

    Science.gov (United States)

    Teehan, R. F.; Anttonen, J. S.; Stein, J. M.; Stearns, J. A.

    Space is undergoing a period of great change, as the barriers to entry are lowering in every arena. Launch to any orbit is becoming more routine and feasible thanks to industry innovation, the rise of small- and cubesats, and the use of ESPA rings enabling “freight trains to GEO.” With more regular rides to space, there is a concomitant rise in the capability for space qualification, technology validation and verification, and all types of experimentation in both the space and ground segments. The types of architectures that commercial and government agencies develop is being influenced because space is becoming more accessible. Whereas current architectures are designed to have four to six satellites perform a mission, in the future that same mission may be distributed among dozens, hundreds, or even thousands of satellites. This changing landscape is something of a double-edged sword for Space Situational Awareness (SSA): safety of flight becomes a heightened concern, but the opportunities for the entire community to innovate, prototype, and ultimately provide novel, robust solutions have never been greater.

  13. Surface Charge Visualization at Viable Living Cells.

    Science.gov (United States)

    Perry, David; Paulose Nadappuram, Binoy; Momotenko, Dmitry; Voyias, Philip D; Page, Ashley; Tripathi, Gyanendra; Frenguelli, Bruno G; Unwin, Patrick R

    2016-03-09

    Scanning ion conductance microscopy (SICM) is demonstrated to be a powerful technique for quantitative nanoscale surface charge mapping of living cells. Utilizing a bias modulated (BM) scheme, in which the potential between a quasi-reference counter electrode (QRCE) in an electrolyte-filled nanopipette and a QRCE in bulk solution is modulated, it is shown that both the cell topography and the surface charge present at cellular interfaces can be measured simultaneously at high spatial resolution with dynamic potential measurements. Surface charge is elucidated by probing the properties of the diffuse double layer (DDL) at the cellular interface, and the technique is sensitive at both low-ionic strength and under typical physiological (high-ionic strength) conditions. The combination of experiments that incorporate pixel-level self-referencing (calibration) with a robust theoretical model allows for the analysis of local surface charge variations across cellular interfaces, as demonstrated on two important living systems. First, charge mapping at Zea mays root hairs shows that there is a high negative surface charge at the tip of the cell. Second, it is shown that there are distinct surface charge distributions across the surface of human adipocyte cells, whose role is the storage and regulation of lipids in mammalian systems. These are new features, not previously recognized, and their implications for the functioning of these cells are highlighted.

  14. Viable Cell Culture Banking for Biodiversity Characterization and Conservation.

    Science.gov (United States)

    Ryder, Oliver A; Onuma, Manabu

    2018-02-15

    Because living cells can be saved for indefinite periods, unprecedented opportunities for characterizing, cataloging, and conserving biological diversity have emerged as advanced cellular and genetic technologies portend new options for preventing species extinction. Crucial to realizing the potential impacts of stem cells and assisted reproductive technologies on biodiversity conservation is the cryobanking of viable cell cultures from diverse species, especially those identified as vulnerable to extinction in the near future. The advent of in vitro cell culture and cryobanking is reviewed here in the context of biodiversity collections of viable cell cultures that represent the progress and limitations of current efforts. The prospects for incorporating collections of frozen viable cell cultures into efforts to characterize the genetic changes that have produced the diversity of species on Earth and contribute to new initiatives in conservation argue strongly for a global network of facilities for establishing and cryobanking collections of viable cells.

  15. Ares I-X Ground Diagnostic Prototype

    Science.gov (United States)

    Schwabacher, Mark A.; Martin, Rodney Alexander; Waterman, Robert D.; Oostdyk, Rebecca Lynn; Ossenfort, John P.; Matthews, Bryan

    2010-01-01

    The automation of pre-launch diagnostics for launch vehicles offers three potential benefits: improving safety, reducing cost, and reducing launch delays. The Ares I-X Ground Diagnostic Prototype demonstrated anomaly detection, fault detection, fault isolation, and diagnostics for the Ares I-X first-stage Thrust Vector Control and for the associated ground hydraulics while the vehicle was in the Vehicle Assembly Building at Kennedy Space Center (KSC) and while it was on the launch pad. The prototype combines three existing tools. The first tool, TEAMS (Testability Engineering and Maintenance System), is a model-based tool from Qualtech Systems Inc. for fault isolation and diagnostics. The second tool, SHINE (Spacecraft Health Inference Engine), is a rule-based expert system that was developed at the NASA Jet Propulsion Laboratory. We developed SHINE rules for fault detection and mode identification, and used the outputs of SHINE as inputs to TEAMS. The third tool, IMS (Inductive Monitoring System), is an anomaly detection tool that was developed at NASA Ames Research Center. The three tools were integrated and deployed to KSC, where they were interfaced with live data. This paper describes how the prototype performed during the period of time before the launch, including accuracy and computer resource usage. The paper concludes with some of the lessons that we learned from the experience of developing and deploying the prototype.

  16. Web tools for rapid experimental visualization prototyping

    Science.gov (United States)

    Decker, Jonathan W.; Livingstion, Mark A.

    2013-01-01

    Quite often a researcher finds themselves looking at spreadsheets of high-dimensional data generated by experimental models and user studies. We can use analysis to challenge or confirm hypothesis, but unexpected results can easily be lost in the shuffle. For this reason, it would be useful to visualize the results so we can explore our data and make new discoveries. Web browsers have become increasingly capable for creating complex, multi-view applications. Javascript is quickly becoming a de facto standard for scripting, online and offline. This work demonstrates the use of web technologies as a powerful tool for rapid visualization prototyping. We have developed two prototypes: One for high-dimensional results of the abELICIT - multi-agent version of the ELICIT platform tasked with collaborating to identify the parameters of a pending attack. Another prototype displays responses to a user study on the effectiveness of multi-layer visualization techniques. We created coordinated multiple views prototypes in the Google Chrome web browser written in Javascript, CSS and HTML. We will discuss the benefits and shortcomings of this approach.

  17. Prototype HL-LHC magnet undergoes testing

    CERN Multimedia

    Corinne Pralavorio

    2016-01-01

    A preliminary short prototype of the quadrupole magnets for the High-Luminosity LHC has passed its first tests.   The first short prototype of the quadrupole magnet for the High Luminosity LHC. (Photo: G. Ambrosio (US-LARP and Fermilab), P. Ferracin and E. Todesco (CERN TE-MSC)) Momentum is gathering behind the High-Luminosity LHC (HL-LHC) project. In laboratories on either side of the Atlantic, a host of tests are being carried out on the various magnet models. In mid-March, a short prototype of the quadrupole magnet underwent its first testing phase at the Fermilab laboratory in the United States. This magnet is a pre-prototype of the quadrupole magnets that will be installed near to the ATLAS and CMS detectors to squeeze the beams before collisions. Six quadrupole magnets will be installed on each side of each experiment, giving a total of 24 magnets, and will replace the LHC's triplet magnets. Made of superconducting niobium-tin, the magnets will be more powerful than their p...

  18. Keeping checkpoint/restart viable for exascale systems.

    Energy Technology Data Exchange (ETDEWEB)

    Riesen, Rolf E.; Bridges, Patrick G. (IBM Research, Ireland, Mulhuddart, Dublin); Stearley, Jon R.; Laros, James H., III; Oldfield, Ron A.; Arnold, Dorian (University of New Mexico, Albuquerque, NM); Pedretti, Kevin Thomas Tauke; Ferreira, Kurt Brian; Brightwell, Ronald Brian

    2011-09-01

    Next-generation exascale systems, those capable of performing a quintillion (10{sup 18}) operations per second, are expected to be delivered in the next 8-10 years. These systems, which will be 1,000 times faster than current systems, will be of unprecedented scale. As these systems continue to grow in size, faults will become increasingly common, even over the course of small calculations. Therefore, issues such as fault tolerance and reliability will limit application scalability. Current techniques to ensure progress across faults like checkpoint/restart, the dominant fault tolerance mechanism for the last 25 years, are increasingly problematic at the scales of future systems due to their excessive overheads. In this work, we evaluate a number of techniques to decrease the overhead of checkpoint/restart and keep this method viable for future exascale systems. More specifically, this work evaluates state-machine replication to dramatically increase the checkpoint interval (the time between successive checkpoint) and hash-based, probabilistic incremental checkpointing using graphics processing units to decrease the checkpoint commit time (the time to save one checkpoint). Using a combination of empirical analysis, modeling, and simulation, we study the costs and benefits of these approaches on a wide range of parameters. These results, which cover of number of high-performance computing capability workloads, different failure distributions, hardware mean time to failures, and I/O bandwidths, show the potential benefits of these techniques for meeting the reliability demands of future exascale platforms.

  19. Texture analysis of cardiac cine magnetic resonance imaging to detect non-viable segments in patients with chronic myocardial infarction.

    Science.gov (United States)

    Larroza, Andrés; López-Lereu, María P; Monmeneu, José V; Gavara, Jose; Chorro, Francisco J; Bodí, Vicente; Moratal, David

    2018-02-01

    To investigate the ability of texture analysis to differentiate between infarcted non-viable, viable, and remote segments on cardiac cine magnetic resonance imaging (MRI). This retrospective study included 50 patients suffering chronic myocardial infarction. The data was randomly split into training (30 patients) and testing (20 patients) sets. The left ventricular myocardium was segmented according to the 17-segment model in both cine and late gadolinium enhancement (LGE) MRI. Infarcted myocardium regions were identified on LGE in short-axis views. Non-viable segments were identified as those showing LGE ≥ 50%, and viable segments those showing 0 cine images. A support vector machine (SVM) classifier was trained with different combination of texture features to obtain a model that provided optimal classification performance. The best classification on testing set was achieved with local binary patterns features using a 2D + t approach, in which the features are computed by including information of the time dimension available in cine sequences. The best overall area under the receiver operating characteristic curve (AUC) were: 0.849, sensitivity of 92% to detect non-viable segments, 72% to detect viable segments, and 85% to detect remote segments. Non-viable segments can be detected on cine MRI using texture analysis and this may be used as hypothesis for future research aiming to detect the infarcted myocardium by means of a gadolinium-free approach. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  20. A Language Translator for a Computer Aided Rapid Prototyping System.

    Science.gov (United States)

    1988-03-01

    53 Table 2. TYPICAL FUNCTIONS FOR NAVMACS AND PROPOSED NAVM ACSM ODEL II...development. Second, the use of prototyping in an automated en- vironment to provide guideline models for the entire life cycle. Use of automated tools. Al

  1. Novel combination of reverse engineering and vapid prototyping in medicine

    CSIR Research Space (South Africa)

    Schenker, R

    1999-08-01

    Full Text Available The technologies of reverse engineering and rapid prototyping are emerging as useful new tools in medicine. One application is of particular interest in orthopaedic, dental and reconstructive surgery. It involves the imaging, modelling...

  2. CONCEPTUAL PRODUCT DESIGN IN VIRTUAL PROTOTYPING

    Directory of Open Access Journals (Sweden)

    Debeleac Carmen

    2009-07-01

    Full Text Available A conceptual model of the industrial design process for isolation against vibrations is proposed and described. This model can be used to design products subject to functional, manufacturing, ergonomic, aesthetic constraints. In this paper, the main stages of the model, such as component organization, conception shape, product detailing and graphical design are discussed. The work has confirmed the validity of proposed model for rapid generation of aesthetic preliminary product designs using the virtual prototyping technique, by one of its main component that is conceptual product design.

  3. Rapid prototyping: An innovative technique in dentistry

    Directory of Open Access Journals (Sweden)

    Shakeba Quadri

    2017-01-01

    Full Text Available Emergence of advanced digital technology has opened up new perspectives for design and production in the field of dentistry. Rapid prototyping (RP is a technique to quickly and automatically construct a three-dimensional (3D model of a part or product using 3D printers or stereolithography machines. RP has various dental applications, such as fabrication of implant surgical guides, zirconia prosthesis and molds for metal castings, maxillofacial prosthesis and frameworks for fixed and removable partial dentures, wax patterns for the dental prosthesis and complete denture. Rapid prototyping presents fascinating opportunities, but the process is difficult as it demands a high level of artistic skill, which means that the dental technicians should be able to work with the models obtained after impression to form a mirror image and achieve good esthetics. This review aims to focus on various RP methods and its application in dentistry.

  4. Cuba-guatemala cooperation: building viable models for health.

    Science.gov (United States)

    Gorry, Conner

    2009-07-01

    The intertwined history of Cuba and Guatemala goes back almost five centuries. In 1536, Friar Bartolom� de las Casas sailed from Cuba to Guatemala with material for his book, A Brief Account of the Destruction of the Indies, seared upon his conscience. Documenting atrocities against Cuba's indigenous populations, the book persuaded Guatemala's colonial powers to rewrite abusive labor laws that were killing the Maya; the book also earned De las Casas the nickname 'apostle of the Indians.' Over 300 years later, the apostle of Cuban independence, Jos� Mart�, cut his journalistic teeth in Guatemala, while Cuban poet Jos� Joaqu�n Palma authored Guatemala's national anthem. More recently, in the 1950s, Dr Ernesto ('Che') Guevara's time in the country solidified his belief in the need for radical social change a few years before he would join Fidel Castro's Rebel Army. And in 1998, Guatemala, like Cuba so many times before and since, was struck by a fierce, fatal hurricane, opening in its wake a new chapter in the countries' shared history. Hurricane Mitch took over 30,000 lives in Central America and is widely considered the deadliest hurricane to hit the Western Hemisphere in 200 years. The storm made landfall in Guatemala on October 26, 1998 killing 268 people and displacing 106,000. Losses were estimated at US$750 million, with 6,000 homes completely destroyed and another 20,000 damaged. Seven health centers and 48 rural health stations serving 50,000 people were affected.[1] Within days, a team of 19 Cuban doctors landed in Puerto San Jos� in the southern department of Escuintla to provide medical assistance. Working alongside Spanish, US, and Guatemalan relief workers, the Cuban contingent set broken bones, treated some 900 cases of cholera[2] and 14,000 of malaria,[3] evacuated pregnant women, and delivered babies. Implementing vector control, safeguarding food supplies, and providing potable water were other measures taken by the Cuban volunteers, who drew on their own experiences in hurricane recovery.

  5. A Model of Human Variability in Viable Ship Design

    Science.gov (United States)

    2014-02-21

    unforeseen change or a novel situation can be incubated in the degrees of freedom afforded to an operator. These degrees of freedom allow for...team has been formed and how long they have interacted with relevant equipment; intactness may be conceptualized as binary or fuzzy (degrees or

  6. Development and Analysis of Desiccant Enhanced Evaporative Air Conditioner Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Kozubal, E.; Woods, J.; Judkoff, R.

    2012-04-01

    This report documents the design of a desiccant enhanced evaporative air conditioner (DEVAP AC) prototype and the testing to prove its performance. Previous numerical modeling and building energy simulations indicate a DEVAP AC can save significant energy compared to a conventional vapor compression AC (Kozubal et al. 2011). The purposes of this research were to build DEVAP prototypes, test them to validate the numerical model, and identify potential commercialization barriers.

  7. Prototyping of Human Spare Parts with 3D Printing

    OpenAIRE

    Sabuj, MD. Shakil Islam

    2014-01-01

    3D printing technology is a leading technology for producing 3D virtual shape product. It is getting more popular by its accuracy and three dimensional objects. The objective of thesis work is to present a technology review on additive manufacturing processes and to produce prototypes of human spare parts such as organs by using 3D printer. Fused deposition modeling additive manufacturing process is used for prototyping of human organs. Human organs are designed by solid modeling software. Th...

  8. Learning Axure RP interactive prototypes

    CERN Document Server

    Krahenbuhl, John Henry

    2015-01-01

    If you are a user experience professional, designer, information architect, or business analyst who wants to gain interactive prototyping skills with Axure, then this book is ideal for you. Some familiarity with Axure is preferred but not essential.

  9. A brief review of dispensing-based rapid prototyping techniques in tissue scaffold fabrication: role of modeling on scaffold properties prediction.

    Science.gov (United States)

    Li, M G; Tian, X Y; Chen, X B

    2009-09-01

    Artificial scaffolds play vital roles in tissue engineering as they provide a supportive environment for cell attachment, proliferation and differentiation during tissue formation. Fabrication of tissue scaffolds is thus of fundamental importance for tissue engineering. Of the variety of scaffold fabrication techniques available, rapid prototyping (RP) methods have attracted a great deal of attention in recent years. This method can improve conventional scaffold fabrication by controlling scaffold microstructure, incorporating cells into scaffolds and regulating cell distribution. All of these contribute towards the ultimate goal of tissue engineering: functional tissues or organs. Dispensing is typically used in different RP techniques to implement the layer-by-layer fabrication process. This article reviews RP methods in tissue scaffold fabrication, with emphasis on dispensing-based techniques, and analyzes the effects of different process factors on fabrication performance, including flow rate, pore size and porosity, and mechanical cell damage that can occur in the bio-manufacturing process.

  10. A brief review of dispensing-based rapid prototyping techniques in tissue scaffold fabrication: role of modeling on scaffold properties prediction

    Energy Technology Data Exchange (ETDEWEB)

    Li, M G; Chen, X B [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5A9 (Canada); Tian, X Y, E-mail: mil715@mail.usask.c [Division of Biomedical Engineering, University of Saskatchewan, Saskatoon, Saskatchewan S7N 5A9 (Canada)

    2009-09-15

    Artificial scaffolds play vital roles in tissue engineering as they provide a supportive environment for cell attachment, proliferation and differentiation during tissue formation. Fabrication of tissue scaffolds is thus of fundamental importance for tissue engineering. Of the variety of scaffold fabrication techniques available, rapid prototyping (RP) methods have attracted a great deal of attention in recent years. This method can improve conventional scaffold fabrication by controlling scaffold microstructure, incorporating cells into scaffolds and regulating cell distribution. All of these contribute towards the ultimate goal of tissue engineering: functional tissues or organs. Dispensing is typically used in different RP techniques to implement the layer-by-layer fabrication process. This article reviews RP methods in tissue scaffold fabrication, with emphasis on dispensing-based techniques, and analyzes the effects of different process factors on fabrication performance, including flow rate, pore size and porosity, and mechanical cell damage that can occur in the bio-manufacturing process. (topical review)

  11. Separable Bilayer Microfiltration Device for Viable Label-free Enrichment of Circulating Tumour Cells

    Science.gov (United States)

    Zhou, Ming-Da; Hao, Sijie; Williams, Anthony J.; Harouaka, Ramdane A.; Schrand, Brett; Rawal, Siddarth; Ao, Zheng; Brennaman, Randall; Gilboa, Eli; Lu, Bo; Wang, Shuwen; Zhu, Jiyue; Datar, Ram; Cote, Richard; Tai, Yu-Chong; Zheng, Si-Yang

    2014-12-01

    The analysis of circulating tumour cells (CTCs) in cancer patients could provide important information for therapeutic management. Enrichment of viable CTCs could permit performance of functional analyses on CTCs to broaden understanding of metastatic disease. However, this has not been widely accomplished. Addressing this challenge, we present a separable bilayer (SB) microfilter for viable size-based CTC capture. Unlike other single-layer CTC microfilters, the precise gap between the two layers and the architecture of pore alignment result in drastic reduction in mechanical stress on CTCs, capturing them viably. Using multiple cancer cell lines spiked in healthy donor blood, the SB microfilter demonstrated high capture efficiency (78-83%), high retention of cell viability (71-74%), high tumour cell enrichment against leukocytes (1.7-2 × 103), and widespread ability to establish cultures post-capture (100% of cell lines tested). In a metastatic mouse model, SB microfilters successfully enriched viable mouse CTCs from 0.4-0.6 mL whole mouse blood samples and established in vitro cultures for further genetic and functional analysis. Our preliminary studies reflect the efficacy of the SB microfilter device to efficiently and reliably enrich viable CTCs in animal model studies, constituting an exciting technology for new insights in cancer research.

  12. ALICE electromagnetic calorimeter prototype test

    Energy Technology Data Exchange (ETDEWEB)

    Awes, Terry; /Oak Ridge

    2005-09-01

    into 2 x 2 individually read out towers. The fibers from an individual tower are grouped together to form readout tower bundles. These are each optically coupled to an avalanche photodiode (APO) via a short light guide to provide some spatial optical mixing and to match the fiber bundle to the APO. The module assembly is indicated in Figure l. The supermodules weigh about 9.6 tons and are the basic units handled during installation. Each supermodule is roughly I45cm wide at the front surface by 350cm long with an active depth of 24.5cm (at {eta} = 0) plus an additional 6.6 cm of depth in structural plates. The physical characteristics of the ALICE EMCal are summarized in Table 1. The EMCal test beam measurements at FNAL will utilize a stacked 4 x 4 array of prototype EMCal modules (8 x 8 towers). All towers will be instrumented with the same model APO and preamplifier as will be used in the ALICE experiment and all channels will be readout with existing prototype front end electronics intended for use in ALICE. The goals of the test beam measurements are: To investigate the energy resolution, linearity, uniformity, and position resolution, using electron beams; To study the energy dependence of the response to electrons and hadrons to determine the particle identification capabilities of the EMCal by shower shape; And to investigate the timing characteristics of the energy signal for crude time-of-flight measurement ({approx} 1ns) for use for anti-neutron rejection. Measurements will be made for comparison with different signal shaping times in the front end electronics.

  13. A Fully Automated Environment for Verification of Virtual Prototypes

    Directory of Open Access Journals (Sweden)

    Belanović P

    2006-01-01

    Full Text Available The extremely dynamic and competitive nature of the wireless communication systems market demands ever shorter times to market for new products. Virtual prototyping has emerged as one of the most promising techniques to offer the required time savings and resulting increases in design efficiency. A fully automated environment for development of virtual prototypes is presented here, offering maximal efficiency gains, and supporting both design and verification flows, from the algorithmic model to the virtual prototype. The environment employs automated verification pattern refinement to achieve increased reuse in the design process, as well as increased quality by reducing human coding errors.

  14. Supporting Active User Involvment in Prototyping

    DEFF Research Database (Denmark)

    Grønbæk, Kaj

    1990-01-01

    development of prototypes to early evaluation of prototypes in envisioned use situations. Having users involved in such activities creates new requirements for tool support. Tools that support direct manipulation of prototypes and simulation of behaviour have shown promise for cooperative prototyping...

  15. Designing Innovation: Prototypes and Team Performance in Design Thinking

    OpenAIRE

    Vetterli, Christophe; Hoffmann, Friederike; Brenner, Walter; Eppler, Martin J.; Uebernickel, Falk

    2012-01-01

    This study investigates design thinking innovation teams working on three different innovation tasks: business model innovation, service innovation, and product innovation. Each task involves the generation of many prototypes, one of which needs to be selected as the final prototype. Further, one of the teams collaborated through virtual collaboration. By measuring both subjective and objective performances of the teams, we compared the different innovation tasks and their impact on design th...

  16. The search for viable local government system in Nigeria: an ...

    African Journals Online (AJOL)

    The history of the Nigerian local government system has been one long episode of trails and errors aimed at achieving viable local government institution without much success. Local government in the country began its long series of reforms from the colonial period when the colonial government attempted to ...

  17. Detection of viable toxigenic Vibrio cholerae and virulent Shigella ...

    African Journals Online (AJOL)

    A rapid and sensitive assay was developed for the detection of low numbers of viable Vibrio cholerae and Shigella spp. cells in environmental and drinking water samples. Water samples were filtered, and the filters were enriched in a non-selective medium. The enrichment cultures were prepared for polymerase chain ...

  18. Comment: Towards a Viable Local Government Structure in Nigeria ...

    African Journals Online (AJOL)

    Local governments are principally established for development at the grassroots and they must be structured in a manner that makes them viable and capable of achieving this purpose. The objective of this comment is to appraise the current local government structure under the Nigerian constitutional framework with a view ...

  19. Cultivation and multiplication of viable axenic Trypanosoma vivax in ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-09-01

    Sep 1, 2009 ... Cultivation and multiplication of viable axenic. Trypanosoma vivax in vitro and in vivo. O. A. Idowu, A. B. Idowu, C. F. Mafiana and S. O. Sam-Wobo*. Parasitology Laboratory, Department of Biological Sciences, University of Agriculture, Abeokuta, Nigeria. Accepted 13 April, 2006. Trypanosoma vivax was ...

  20. Detection of viable toxigenic Vibrio cholerae and virulent Shigella ...

    African Journals Online (AJOL)

    DRINIE

    2003-04-02

    Apr 2, 2003 ... A rapid and sensitive assay was developed for the detection of low numbers of viable Vibrio cholerae and Shigella spp. cells in environmental and drinking water samples. Water samples were filtered, and the filters were enriched in a non-selective medium. The enrichment cultures were prepared for ...

  1. High speed flow cytometric separation of viable cells

    Science.gov (United States)

    Sasaki, Dennis T.; Van den Engh, Gerrit J.; Buckie, Anne-Marie

    1995-01-01

    Hematopoietic cell populations are separated to provide cell sets and subsets as viable cells with high purity and high yields, based on the number of original cells present in the mixture. High-speed flow cytometry is employed using light characteristics of the cells to separate the cells, where high flow speeds are used to reduce the sorting time.

  2. Experimental study of asymmetric heart valve prototype

    Science.gov (United States)

    Vukicevic, M.; Fortini, S.; Querzoli, G.; Cenedese, A.; Pedrizzetti, G.

    2011-11-01

    The mechanical heart valves (MHVs) are extremely important medical devices, commonly used for diseased heart valves replacement. Despite the long term of use and constant design refinement, the MHVs are very far from ideal and their performance is very diverse from that of the native ones. It has been approved that small variations in geometry of valvular leaflets influence the significant change in the intraventricular vortical flow, known as one of the most important factors for the overall functionality of the heart. We have experimentally examined the home-made heart valve prototypes, exclusively modeled for the mitral valve replacement. The performance and energetic properties of the prototypes have been compared with those in the presence of standard MHVs. The analysis was based on the testing of intraventricular fluid dynamics, usually missing criteria for the quality of the valve performance. It has been shown that the asymmetric prototype, with unequal leaflets and D-shaped orifice produces flow patterns and energetic properties close to those found in the healthy subjects. Thus, the break of symmetry in the standard bi-leaflet MHV prosthesis, at least from the fluid dynamics point of view, is worthwhile to be considered for the design of MHVs for the mitral valve replacement.

  3. Composites by rapid prototyping technology

    CSIR Research Space (South Africa)

    Kumar, S

    2010-02-01

    Full Text Available powder is a fiber, problems of manufacturing occur. The method has also been used to make Metal Matrix Composite (MMC), e.g Fe and graphite [17], WC-Co [18,19], WC-Co and Cu [20,21], Fe, Ni and TiC [22] etc and Ceramic Matrix Composite (CMC) e.g. Si... of various materials used. Key words: : Rapid Prototyping (RP), Laser, Composites 1 Introduction Rapid Prototyping (RP) initially focussed on polymers. These were later re- placed/supplemented by ceramics, metals and composites. Composites are used in RP...

  4. Axure RP 6 Prototyping Essentials

    CERN Document Server

    Schwartz, Ezra

    2012-01-01

    Axure RP 6 Prototyping Essentials is a detailed, practical primer on the leading rapid prototyping tool. Short on jargon and high on concepts, real-life scenarios and step-by-step guidance through hands-on examples, this book will show you how to integrate Axure into your UX workflow. This book is written for UX practitioners, business analysts, product managers, and anyone else who is involved in UX projects. The book assumes that you have no or very little familiarity with Axure. It will help you if you are evaluating the tool for an upcoming project or are required to quickly get up to spee

  5. Biomechanical comparison of pin and tension-band wire fixation with a prototype locking plate fixation in a transverse canine patellar fracture model.

    Science.gov (United States)

    Gibert, Sophie; Kowaleski, Michael P; Matthys, Romano; Nützi, Reto; Serck, Boris; Boudrieau, Randy J

    2016-01-01

    To compare a locking plate (LP) with pin and tension-band wire (pin/TBW) for fixation of mid-patellar transverse fractures. Cadaveric canine stifle joints from 10 adult mixed breed dogs (23-36 kg) were used. Mid-patellar transverse osteotomies were randomly stabilized (in pairs) with either pin/TBW or a prototype LP. Cyclic loads (1 Hz, 500 cycles) at 100% body weight (90°-135° stifle joint extension), were applied. Survival or failure of constructs was defined as <2 mm fracture gap distraction at 500 cycles, or ≥2 mm fracture gap distraction at the number of cycles sustained, respectively. Number of cycles at failure and distraction gap were compared with a paired Student's t-test, and a survival analysis performed with a Mantel-Cox test. All constructs that survived cyclic testing were tested in single cycle load to failure (1.0 mm/sec; 110° stifle joint extension); yield strength was compared with a Wilcoxon rank sum test. Significance was set at p <0.05. All 10/10 LP and three out of 10 pin/TBW fixations survived cyclic testing. Survival analysis, number of cycles at failure, and distraction gap all were significantly different between the two groups (p = 0.0011, p = 0.0013, and p <0.0001, respectively). Construct yield strength was not significantly different (p = 0.1273). The failure mode with pin/TBW was consistently similar to failures observed clinically. The LP demonstrated consistent, reliable and stable fixation.

  6. The Software Engineering Prototype.

    Science.gov (United States)

    1983-06-01

    sequential problem solving in which the cycles form networks. An essential part of this model is the continuous feedback between tke designer and the...34Systems, Reitv and the SystEms Pracgioner", Journal of Systems Man_ emen&, January 1981, p. 26-28. --.... Jnuar 34. Gilt , Tom "High-Level Systems...Development", Software Sngineri.& Note.s, vol. 6, no. 2, April 1981, T.- 7" 45. Stavely, Allan I. ,"Design Feedback and ims Use in Software resign

  7. Cosmic constraint on massive neutrinos in viable f( R) gravity with producing Λ CDM background expansion

    Science.gov (United States)

    Lu, Jianbo; Liu, Molin; Wu, Yabo; Wang, Yan; Yang, Weiqiang

    2016-12-01

    Tensions between several cosmic observations were found recently, such as the inconsistent values of H0 (or σ 8) were indicated by the different cosmic observations. Introducing the massive neutrinos in Λ CDM could potentially solve the tensions. Viable f( R) gravity producing Λ CDM background expansion with massive neutrinos is investigated in this paper. We fit the current observational data: Planck-2015 CMB, RSD, BAO, and SNIa to constrain the mass of neutrinos in viable f( R) theory. The constraint results at 95% confidence level are: Σ m_ν case, m_{ν , sterile}^effcase. For the effects due to the mass of the neutrinos, the constraint results on model parameter at 95% confidence level become f_{R0}× 10^{-6}> -1.89 and f_{R0}× 10^{-6}> -2.02 for two cases, respectively. It is also shown that the fitting values of several parameters much depend on the neutrino properties, such as the cold dark matter density, the cosmological quantities at matter-radiation equality, the neutrino density and the fraction of baryonic mass in helium. Finally, the constraint result shows that the tension between direct and CMB measurements of H_0 gets slightly weaker in the viable f( R) model than that in the base Λ CDM model.

  8. The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

    Science.gov (United States)

    Lee, Chia-Jung; Kim, ChanMin

    2014-01-01

    This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

  9. Encapsulation of polymer photovoltaic prototypes

    DEFF Research Database (Denmark)

    Krebs, Frederik C

    2006-01-01

    A simple and efficient method for the encapsulation of polymer and organic photovoltaic prototypes is presented. The method employs device preparation on glass substrates with subsequent sealing using glass fiber reinforced thermosetting epoxy (prepreg) against a back plate. The method allows...

  10. Prototyping of user interfaces for mobile applications

    CERN Document Server

    Bähr, Benjamin

    2017-01-01

    This book investigates processes for the prototyping of user interfaces for mobile apps, and describes the development of new concepts and tools that can improve the prototype driven app development in the early stages. It presents the development and evaluation of a new requirements catalogue for prototyping mobile app tools that identifies the most important criteria such tools should meet at different prototype-development stages. This catalogue is not just a good point of orientation for designing new prototyping approaches, but also provides a set of metrics for a comparing the performance of alternative prototyping tools. In addition, the book discusses the development of Blended Prototyping, a new approach for prototyping user interfaces for mobile applications in the early and middle development stages, and presents the results of an evaluation of its performance, showing that it provides a tool for teamwork-oriented, creative prototyping of mobile apps in the early design stages.

  11. Prototype Effect and the Persuasiveness of Generalizations.

    Science.gov (United States)

    Dahlman, Christian; Sarwar, Farhan; Bååth, Rasmus; Wahlberg, Lena; Sikström, Sverker

    An argument that makes use of a generalization activates the prototype for the category used in the generalization. We conducted two experiments that investigated how the activation of the prototype affects the persuasiveness of the argument. The results of the experiments suggest that the features of the prototype overshadow and partly overwrite the actual facts of the case. The case is, to some extent, judged as if it had the features of the prototype instead of the features it actually has. This prototype effect increases the persuasiveness of the argument in situations where the audience finds the judgment more warranted for the prototype than for the actual case (positive prototype effect), but decreases persuasiveness in situations where the audience finds the judgment less warranted for the prototype than for the actual case (negative prototype effect).

  12. Prototype diagnosis of psychiatric syndromes

    Science.gov (United States)

    WESTEN, DREW

    2012-01-01

    The method of diagnosing patients used since the early 1980s in psychiatry, which involves evaluating each of several hundred symptoms for their presence or absence and then applying idiosyncratic rules for combining them for each of several hundred disorders, has led to great advances in research over the last 30 years. However, its problems have become increasingly apparent, particularly for clinical practice. An alternative approach, designed to maximize clinical utility, is prototype matching. Instead of counting symptoms of a disorder and determining whether they cross an arbitrary cutoff, the task of the diagnostician is to gauge the extent to which a patient’s clinical presentation matches a paragraph-length description of the disorder using a simple 5-point scale, from 1 (“little or no match”) to 5 (“very good match”). The result is both a dimensional diagnosis that captures the extent to which the patient “has” the disorder and a categorical diagnosis, with ratings of 4 and 5 corresponding to presence of the disorder and a rating of 3 indicating “subthreshold” or “clinically significant features”. The disorders and criteria woven into the prototypes can be identified empirically, so that the prototypes are both scientifically grounded and clinically useful. Prototype diagnosis has a number of advantages: it better captures the way humans naturally classify novel and complex stimuli; is clinically helpful, reliable, and easy to use in everyday practice; facilitates both dimensional and categorical diagnosis and dramatically reduces the number of categories required for classification; allows for clinically richer, empirically derived, and culturally relevant classification; reduces the gap between research criteria and clinical knowledge, by allowing clinicians in training to learn a small set of standardized prototypes and to develop richer mental representations of the disorders over time through clinical experience; and can help

  13. Removal of viable bacteria and endotoxins by Electro Deionization (EDI).

    Science.gov (United States)

    Harada, Norimitsu; Otomo, Teruo; Watabe, Tomoichi; Ase, Tomonobu; Takemura, Takuto; Sato, Toshio

    2011-09-01

    Viable bacteria and endotoxins in water sometimes cause problems for human health. Endotoxins are major components of the outer cell wall of gram-negative bacteria (lipopolysaccharides). In medical procedures, especially haemodialysis (HD) and related therapies (haemodiafiltration (HDF), haemofiltration (HF)), endotoxins in the water for haemodialysis can permeate through the haemodialysis membrane and cause microinflammation or various haemodialysis-related illnesses. To decrease such a biological risk, RO and UF membranes are generally used. Also, hot water disinfection or the chemical disinfection is regularly executed to kill bacteria which produce endotoxins. However, simple treatment methods and equipment may be able to decrease the biological risk more efficiently. In our experiments, we confirmed that viable bacteria and endotoxins were removed by Electro Deionization (EDI) technology and also clarified the desorption mechanisms.

  14. Development and Evaluation of the Virtual Prototype of the First Saudi Arabian-Designed Car

    Directory of Open Access Journals (Sweden)

    Mustufa H. Abidi

    2016-10-01

    Full Text Available Prototyping and evaluation are imperative phases of the present product design and development process. Although digital modeling and analysis methods are widely employed at various product development stages, still, building a physical prototype makes the present typical process expensive and time consuming. Therefore, it is necessary to implement new technologies, such as virtual prototyping, which can enable industry to have a rapid and more controlled decision making process. Virtual prototyping has come a long way in recent years, where current environments enable stereoscopic visuals, surround sound and ample interaction with the generated models. It is also important to evaluate how representative the developed virtual prototype is when compared to the real-world counterpart and the sense of presence reported by users of the virtual prototype. This paper describes the systematic procedure to develop a virtual prototype of Gazal-1 (i.e., the first car prototype designed by Saudi engineers in a semi-immersive virtual environment. The steps to develop a virtual prototype from CAD (computer-aided design models are explained in detail. Various issues involved in the different phases for the development of the virtual prototype are also discussed comprehensively. The paper further describes the results of the subjective assessment of a developed virtual prototype of a Saudi Arabian-designed automobile. User’s feedback is recorded using a presence questionnaire. Based on the user-based study, it is revealed that the virtual prototype is representative of the real Saudi Arabian car and offers a flexible environment to analyze design features when compared against its physical prototype. The capabilities of the virtual environment are validated with the application of the car prototype. Finally, vital requirements and directions for future research are also presented.

  15. Results of the 2015 testbeam of a 180 nm AMS High-Voltage CMOS sensor prototype

    CERN Document Server

    Benoit, M.

    2016-07-21

    Active pixel sensors based on the High-Voltage CMOS technology are being investigated as a viable option for the future pixel tracker of the ATLAS experiment at the High-Luminosity LHC. This paper reports on the testbeam measurements performed at the H8 beamline of the CERN Super Proton Synchrotron on a High-Voltage CMOS sensor prototype produced in 180 nm AMS technology. Results in terms of tracking efficiency and timing performance, for different threshold and bias conditions, are shown.

  16. Acupuntura un tratamiento viable para las adicciones en Colombia

    Directory of Open Access Journals (Sweden)

    Hernán López Seuscún

    2013-07-01

    Los tratamientos con auriculoterapia, como el protocolo NADA (National Acupuncture Detoxification Association, son los métodos más usados para las adicciones en el mundo, y aunque no se ha logrado evidenciar su efectividad, por su costo, facilidad y el poco riesgo de efectos adversos se hace viable en un país con pocos recursos económicos como Colombia.

  17. How Can We Prevent Violence Becoming a Viable Political Strategy?

    OpenAIRE

    Patricia Justino

    2009-01-01

    A basic issue that conflict analysis investigates is how non-peaceful ways of living and governing become viable political strategies. Macro-level studies provide some important insights but micro-level analysis is vital to understand the mechanisms that make violence possible. This briefing outlines some preliminary findings in this respect from MICROCON, a major research programme analysing violent conflict at the micro level. It also discusses their implications for policies aimed at preve...

  18. Augmented reality usage for prototyping speed up

    Directory of Open Access Journals (Sweden)

    Jiří Šťastný

    2011-01-01

    Full Text Available The integral part of production process in many companies is prototyping. Although, these companies commonly have high quality visualization tools (large screen projections, virtual reality, prototyping was never abandoned. There is a number of reasons. The most important is the possibility of model observation from any angle without any physical constraints and its haptic feedback. The interactivity of model adjustments is important as well. The direct work with the model allows the designers to focus on the creative process more than work with a computer. There is still a problem with a difficult adjustability of the model. More significant changes demand completely new prototype or at least longer time for its realization.The first part of the article describes our approach for solution of this problem by means of Augmented Reality. The merging of the real world model and digital objects allows streamline the work with the model and speed up the whole production phase significantly. The main advantage of augmented reality is the possibility of direct manipulation with the scene using a portable digital camera. Also adding digital objects into the scene could be done using identification markers placed on the surface of the model. Therefore it is not necessary to work with special input devices and lose the contact with the real world model. Adjustments are done directly on the model. The key problem of outlined solution is the ability of identification of an object within the camera picture and its replacement with the digital object. The second part of the article is focused especially on the identification of exact position and orientation of the marker within the picture. The identification marker is generalized into the triple of points which represents a general plane in space. There is discussed the space identification of these points and the description of representation of their position and orientation be means of transformation

  19. Rapid Prototyping and its Application in Dentistry

    Directory of Open Access Journals (Sweden)

    V. N. V. Madhav

    2013-01-01

    Full Text Available Medical implants and biological models have three main characteristics: low volume, complex shape, and can be customized. These characteristics suit very well with Rapid Prototyping (RP and Rapid Manufacturing (RM processes. RP/RM processes are fabricated part layer- by-layer until complete shape finished from 3D model. Biocompatible materials, such as Titanium and Titanium alloy, Zirconium, Cobalt Chromium, PEEK, etc, are used for fabrication process. Reverse Engineering (RE technology greatly affects RP/RM processes. RE is used to capture or scan image of the limb, cranium, tooth, and other biological objects. Three common methods to get the image are 3D laser scanning, Computer Tomography (CT, and Magnetic Resonance Imaging (MRI. Main RP/RM techniques used in Dentistry are Stereotype Lithography Apparatus (SLA, Fused Deposition Modeling (FDM, Selective Laser Sintering (SLS, and ink jet printing. This article reviews the changing scenario of technology in dentistry with special emphasis on Rapid Prototyping and its various applications in Dentistry.

  20. VO for Education: Archive Prototype

    Science.gov (United States)

    Ramella, M.; Iafrate, G.; De Marco, M.; Molinaro, M.; Knapic, C.; Smareglia, R.; Cepparo, F.

    2014-05-01

    The number of remote control telescopes dedicated to education is increasing in many countries, leading to correspondingly larger and larger amount of stored educational data that are usually available only to local observers. Here we present the project for a new infrastructure that will allow teachers using educational telescopes to archive their data and easily publish them within the Virtual Observatory (VO) avoiding the complexity of professional tools. Students and teachers anywhere will be able to access these data with obvious benefits for the realization of grander scale collaborative projects. Educational VO data will also be an important resource for teachers not having direct access to any educational telescopes. We will use the educational telescope at our observatory in Trieste as a prototype for the future VO educational data archive resource. The publishing infrastructure will include: user authentication, content and curation validation, data validation and ingestion, VO compliant resource generation. All of these parts will be performed by means of server side applications accessible through a web graphical user interface (web GUI). Apart from user registration, that will be validated by a natural person responsible for the archive (after having verified the reliability of the user and inspected one or more test files), all the subsequent steps will be automated. This means that at the very first data submission through the webGUI, a complete resource including archive and published VO service will be generated, ready to be registered to the VO. The efforts required to the registered user will consist only in describing herself/himself at registration step and submitting the data she/he selects for publishing after each observation sessions. The infrastructure will be file format independent and the underlying data model will use a minimal set of standard VO keywords, some of which will be specific for outreach and education, possibly including VO

  1. A rapid biosensor for viable B. anthracis spores.

    Science.gov (United States)

    Baeumner, Antje J; Leonard, Barbara; McElwee, John; Montagna, Richard A

    2004-09-01

    A simple membrane-strip-based biosensor assay has been combined with a nucleic acid sequence-based amplification (NASBA) reaction for rapid (4 h) detection of a small number (ten) of viable B. anthracis spores. The biosensor is based on identification of a unique mRNA sequence from one of the anthrax toxin genes, the protective antigen ( pag), encoded on the toxin plasmid, pXO1, and thus provides high specificity toward B. anthracis. Previously, the anthrax toxins activator ( atxA) mRNA had been used in our laboratory for the development of a biosensor for the detection of a single B. anthracis spore within 12 h. Changing the target sequence to the pag mRNA provided the ability to shorten the overall assay time significantly. The vaccine strain of B. anthracis (Sterne strain) was used in all experiments. A 500-microL sample containing as few as ten spores was mixed with 500 microL growth medium and incubated for 30 min for spore germination and mRNA production. Thus, only spores that are viable were detected. Subsequently, RNA was extracted from lysed cells, selectively amplified using NASBA, and rapidly identified by the biosensor. While the biosensor assay requires only 15 min assay time, the overall process takes 4 h for detection of ten viable B. anthracis spores, and is shortened significantly if more spores are present. The biosensor is based on an oligonucleotide sandwich-hybridization assay format. It uses a membrane flow-through system with an immobilized DNA probe that hybridizes with the target sequence. Signal amplification is provided when the target sequence hybridizes to a second DNA probe that has been coupled to liposomes encapsulating the dye sulforhodamine B. The amount of liposomes captured in the detection zone can be read visually or quantified with a hand-held reflectometer. The biosensor can detect as little as 1 fmol target mRNA (1 nmol L(-1)). Specificity analysis revealed no cross-reactivity with 11 organisms tested, among them closely

  2. [Draft] Developing a model (prototypical process) for integrating landscape-scale issues into comprehensive planning of national wildlife refuges and other conservation lands

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — It is the goal of this project to help improve the quality of planning of refuges and other conservation areas by developing a model that includes practical tools...

  3. Carbon-Temperature-Water Change Analysis for Peanut Production Under Climate Change: A Prototype for the AgMIP Coordinated Climate-Crop Modeling Project (C3MP)

    Science.gov (United States)

    Ruane, Alex C.; McDermid, Sonali; Rosenzweig, Cynthia; Baigorria, Guillermo A.; Jones, James W.; Romero, Consuelo C.; Cecil, L. DeWayne

    2014-01-01

    Climate change is projected to push the limits of cropping systems and has the potential to disrupt the agricultural sector from local to global scales. This article introduces the Coordinated Climate-Crop Modeling Project (C3MP), an initiative of the Agricultural Model Intercomparison and Improvement Project (AgMIP) to engage a global network of crop modelers to explore the impacts of climate change via an investigation of crop responses to changes in carbon dioxide concentration ([CO2]), temperature, and water. As a demonstration of the C3MP protocols and enabled analyses, we apply the Decision Support System for Agrotechnology Transfer (DSSAT) CROPGRO-Peanut crop model for Henry County, Alabama, to evaluate responses to the range of plausible [CO2], temperature changes, and precipitation changes projected by climate models out to the end of the 21st century. These sensitivity tests are used to derive crop model emulators that estimate changes in mean yield and the coefficient of variation for seasonal yields across a broad range of climate conditions, reproducing mean yields from sensitivity test simulations with deviations of ca. 2% for rain-fed conditions. We apply these statistical emulators to investigate how peanuts respond to projections from various global climate models, time periods, and emissions scenarios, finding a robust projection of modest (20%) losses and larger uncertainty at the end of the century under the more severe representative concentration pathway (RCP8.5). This projection is not substantially altered by the selection of the AgMERRA global gridded climate dataset rather than the local historical observations, differences between the Third and Fifth Coupled Model Intercomparison Project (CMIP3 and CMIP5), or the use of the delta method of climate impacts analysis rather than the C3MP impacts response surface and emulator approach.

  4. Prototyping the PANDA Barrel DIRC

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, C., E-mail: C.Schwarz@gsi.de [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (Germany); Kalicy, G.; Dzhygadlo, R.; Gerhardt, A.; Götzen, K.; Hohler, R.; Kumawat, H.; Lehmann, D.; Lewandowski, B.; Patsyuk, M.; Peters, K.; Schepers, G.; Schmitt, L.; Schwiening, J.; Traxler, M.; Zühlsdorf, M. [GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (Germany); Dodokhov, V.Kh. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Britting, A.; Eyrich, W.; Lehmann, A. [Friedrich Alexander-University of Erlangen-Nuremberg, Erlangen (Germany); and others

    2014-12-01

    The design of the Barrel DIRC detector for the future PANDA experiment at FAIR contains several important improvements compared to the successful BABAR DIRC, such as focusing and fast timing. To test those improvements as well as other design options a prototype was build and successfully tested in 2012 with particle beams at CERN. The prototype comprises a radiator bar, focusing lens, mirror, and a prism shaped expansion volume made of synthetic fused silica. An array of micro-channel plate photomultiplier tubes measures the location and arrival time of the Cherenkov photons with sub-nanosecond resolution. The development of a fast reconstruction algorithm allowed to tune construction details of the detector setup with test beam data and Monte-Carlo simulations.

  5. JUNO PMT system and prototyping

    Science.gov (United States)

    Wang, Zhimin; JUNO Collaboration

    2017-09-01

    The Jiangmen Underground Neutrino Observatory (JUNO) is a multi-purpose underground experiment and the largest liquid scintillator (LS) detector going for neutrino mass hierarchy, precise neutrino oscillation parameter measurement and studies of other rare processes, including but not limited to, solar neutrino, geo-neutrino, supernova neutrinos and the diffuse supernova neutrinos background. The 20” PMT system with ∼17000 high quantum efficiency tubes, including Hamamatsu 20” and newly developed MCP 20” tubes, is one of the keys of JUNO experiment for better energy resolution, good detector response etc. We are doing prototypes for PMTs, detectors to study/understand more detailed characteristics of the future detector. Here plans to give you a full view about the JUNO PMT system and its prototyping, including the PMT system layout, PMT testing system design, PMT water proof potting with electronics, installation ideas and the basics PMT performance.

  6. Glatz Prototype Seat Impact Testing

    Science.gov (United States)

    2013-07-03

    My) 1372 2744 3673 Extension (in-lbs) (-My) 593 1195 1584 Nij combines tension, compression, flexion , and extension of the upper neck to...the added Glatz prototype retest data. Neck tension- flexion is exceeded with a value of 0.9922. Neck injury probably in tension- flexion appears to...14 summarizes the neck injury probability data for Cell U. All seats surpassed the established injury criteria for tension- flexion . The modified

  7. The Application of the prototype theory in lexicographic practice: A ...

    African Journals Online (AJOL)

    ... for a highly polysemous verb formed according to the proposed model. A solid theoretical foundation of the model is expected to ensure its practi-cal efficiency primarily concerning quick and easy detection and understanding of senses. Keywords: Lexicology, lexicography, cognitive linguistics, prototype theory, polysemy, ...

  8. Developing an Interactive Augmented Prototyping Methodology to Support Design Reviews

    NARCIS (Netherlands)

    Verlinden, J.C.

    2014-01-01

    Physical prototypes and scale models play an important role in engineering design processes, especially in the field of industrial design. Such models are typically used to explore and discuss design concepts in various stages, from initial idea generation to manufacturing. Over the last decade,

  9. Modulation of the endocannabinoid system in viable and non-viable first trimester pregnancies by pregnancy-related hormones

    Directory of Open Access Journals (Sweden)

    Taylor Anthony H

    2011-11-01

    Full Text Available Abstract Background In early pregnancy, increased plasma levels of the endocannabinoid anandamide (AEA are associated with miscarriage through mechanisms that might affect the developing placenta or maternal decidua. Methods In this study, we compare AEA levels in failed and viable pregnancies with the levels of the trophoblastic hormones (beta-human chorionic gonadotrophin (beta-hCG, progesterone (P4 and (pregnancy-associated placental protein-A (PAPP-A essential for early pregnancy success and relate that to the expression of the cannabinoid receptors and enzymes that modulate AEA levels. Results The median plasma AEA level in non-viable pregnancies (1.48 nM; n = 20 was higher than in viable pregnancies (1.21 nM; n = 25; P = 0.013, as were progesterone and beta-hCG levels (41.0 vs 51.5 ng/mL; P = 0.052 for P4 and 28,650 vs 6,560 mIU/L; P = 0.144 for beta-hCG, respectively, but were not statistically significant. Serum PAPP-A levels in the viable group were approximately 6.8 times lower than those in the non-viable group (1.82 vs 12.25 mg/L; P = 0.071, but again these differences were statistically insignificant. In the spontaneous miscarriage group, significant correlations between P4 and beta-hCG, P4 and PAPP-A and AEA and PAPP-A levels were observed. Simultaneously, immunohistochemical distributions of the two main cannabinoid receptors and the AEA-modifying enzymes, fatty acid amide hydrolase (FAAH and N-acylphosphatidylethanolamine-phospholipase D (NAPE-PLD, changed within both the decidua and trophoblast. Conclusions The association of higher AEA levels with early pregnancy failure and with beta-hCG and PAPP-A, but not with progesterone concentrations suggest that plasma AEA levels and pregnancy failure are linked via a mechanism that may involve trophoblastic beta-hCG, and PAPP-A, but not, progesterone production. Although the trophoblast, decidua and embryo contain receptors for AEA, the main AEA target in early pregnancy failure

  10. Desiccation induces viable but Non-Culturable cells in Sinorhizobium meliloti 1021.

    Science.gov (United States)

    Vriezen, Jan Ac; de Bruijn, Frans J; Nüsslein, Klaus R

    2012-01-20

    Sinorhizobium meliloti is a microorganism commercially used in the production of e.g. Medicago sativa seed inocula. Many inocula are powder-based and production includes a drying step. Although S. meliloti survives drying well, the quality of the inocula is reduced during this process. In this study we determined survival during desiccation of the commercial strains 102F84 and 102F85 as well as the model strain USDA1021.The survival of S. meliloti 1021 was estimated during nine weeks at 22% relative humidity. We found that after an initial rapid decline of colony forming units, the decline slowed to a steady 10-fold reduction in colony forming units every 22 days. In spite of the reduction in colony forming units, the fraction of the population identified as viable (42-54%) based on the Baclight live/dead stain did not change significantly over time. This change in the ability of viable cells to form colonies shows (i) an underestimation of the survival of rhizobial cells using plating methods, and that (ii) in a part of the population desiccation induces a Viable But Non Culturable (VBNC)-like state, which has not been reported before. Resuscitation attempts did not lead to a higher recovery of colony forming units indicating the VBNC state is stable under the conditions tested. This observation has important consequences for the use of rhizobia. Finding methods to resuscitate this fraction may increase the quality of powder-based seed inocula.

  11. Prototypes in engineering design: Definitions and strategies

    DEFF Research Database (Denmark)

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mortensen, Niels Henrik

    2016-01-01

    strategies. Due to rapid changes and progressions in the use of prototypes, we conclude conclude that there is a need for more holistic and overview generating research about prototyping. This for product developers to properly manage, select and apply the optimal prototyping process....

  12. Field Data Logger Prototype for Power Converters

    DEFF Research Database (Denmark)

    Chaudhary, Sanjay; Ghimire, Pramod; Thøgersen, Paul Bach

    2014-01-01

    and subsequent analysis of the data. This paper presents the development of a low cost prototype field data logger prototype using Raspberry PI and industrial sensors. The functionalities of the data logger prototype are described. An online rainflow count algorithm has been implemented as well....

  13. Total viable bacterial count using a real time all-fibre spectroscopic system.

    Science.gov (United States)

    Bogomolny, E; Swift, S; Vanholsbeeck, F

    2013-07-21

    Rapid, accurate and sensitive enumeration of bacterial populations in the natural environment is an essential task for many research fields. Widely used standard methods for counting bacteria such as heterotrophic plate count require 1 to 8 days of incubation time for limited accuracy, while more accurate and rapid techniques are often expensive and may require bulky equipment. In the present study, we have developed a computerized optical prototype for bacterial detection. The goal of this research was to estimate the potential of this optical system for Total Viable Bacterial Count in water. For this purpose, we tested water batches with different microbiological content. Bacterial detection was based on fluorescence enhanced by nucleic acid staining. High sensitivity was achieved by a stable diode pumped solid state laser, sensitive CCD spectrometer and in situ excitation and signal collection. The results have shown that the bacterial count from different water origins using our optical setup along with multivariate analysis presents a higher accuracy and a shorter detection time compared to standard methods. For example, in a case where the fluorescence signal is calibrated to the water batch regression line, the relative standard deviation of the optical system enumeration varies between 21 and 36%, while that of the heterotropic plate count counterpart varies between 41 and 59%. In summary, we conclude that the all-fibre optical system may offer the following advantages over conventional methods: near real time examinations, portability, sensitivity, accuracy and ability to detect 10(2) to 10(8) CFU per ml bacterial concentrations.

  14. A Model To Marry Recruitment and Retention: A Case Study of Prototype Development in the New Administration of Justice Program @ Blue Ridge Community College.

    Science.gov (United States)

    Stewart, Donna L.; Levin, Bernard H.

    This paper presents findings on predictive models used to identify student characteristics associated with persistence and success in the Administration of Justice (ADJ) program at Blue Ridge Community College (Virginia). Data mining was used to discover patterns and relationships in the data, and analysis was performed using the SPSS program,…

  15. Challenge pools of hepatitis C virus genotypes 1-6 prototype strains: replication fitness and pathogenicity in chimpanzees and human liver-chimeric mouse models

    DEFF Research Database (Denmark)

    Bukh, Jens; Meuleman, Philip; Tellier, Raymond

    2010-01-01

    Chimpanzees represent the only animal model for studies of the natural history of hepatitis C virus (HCV). To generate virus stocks of important HCV variants, we infected chimpanzees with HCV strains of genotypes 1-6 and determined the infectivity titer of acute-phase plasma pools in additional a...

  16. Inkjet printing of viable human dental follicle stem cells

    Directory of Open Access Journals (Sweden)

    Mau Robert

    2015-09-01

    Full Text Available Inkjet printing technology has the potential to be used for seeding of viable cells for tissue engineering approaches. For this reason, a piezoelectrically actuated, drop-on-demand inkjet printing system was applied to deliver viable human dental follicle stem cells (hDFSC of sizes of about 15 μm up to 20 μm in diameter. The purpose of these investigations was to verify the stability of the printing process and to evaluate cell viability post printing. Using a Nanoplotter 2.1 (Gesim, Germany equipped with the piezoelectric printhead NanoTip HV (Gesim, Germany, a concentration of 6.6 ×106 cells ml−1 in DMEM with 10% fetal calf serum (FCS could be dispensed. The piezoelectric printhead has a nominal droplet volume of ~ 400 pl and was set to a voltage of 75 V and a pulse of 50 μs while dosing 50 000 droplets over a time of 100 seconds. The volume and trajectory of the droplet were checked by a stroboscope test right before and after the printing process. It was found that the droplet volume decreases significantly by 35% during printing process, while the trajectory of the droplets remains stable with only an insignificant number of degrees deviation from the vertical line. It is highly probable that some cell sedimentations or agglomerations affect the printing performance. The cell viability post printing was assessed by using the Trypan Blue dye exclusion test. The printing process was found to have no significant influence on cell survival. In conclusion, drop-on-demand inkjet printing can be a potent tool for the seeding of viable cells.

  17. A technique for determining viable military logistics support alternatives

    Science.gov (United States)

    Hester, Jesse Stuart

    A look at today's US military will see them operating much beyond the scope of protecting and defending the United States. These operations now consist of, but are not limited to humanitarian aid, disaster relief, peace keeping, and conflict resolution. This broad spectrum of operational environments has necessitated a transformation of the individual military services to a hybrid force that is attempting to leverage the inherent and emerging capabilities and strengths of all those under the umbrella of the Department of Defense (DOD), this concept has been coined Joint Operations. Supporting Joint Operations requires a new approach to determining a viable military logistics support system. The logistics architecture for these operations has to accommodate scale, time, varied mission objectives, and imperfect information. Compounding the problem is the human in the loop (HITL) decision maker (DM) who is a necessary component for quickly assessing and planning logistics support activities. Past outcomes are not necessarily good indicators of future results, but they can provide a reasonable starting point for planning and prediction of specific needs for future requirements. Adequately forecasting the necessary logistical support structure and commodities needed for any resource intensive environment has progressed well beyond stable demand assumptions to one in which dynamic and nonlinear environments can be captured with some degree of fidelity and accuracy. While these advances are important, a holistic approach that allows exploration of the operational environment or design space does not exist to guide the military logistician in a methodical way to support military forecasting activities. To bridge this capability gap, a method called Adaptive Technique for Logistics Architecture Solutions (ATLAS) has been developed. This method provides a process that facilitates the use of techniques and tools that filter and provide relevant information to the DM. By doing

  18. Review, Selection and Installation of a Rapid Prototype Machine

    Science.gov (United States)

    McEndree, Caryl

    2008-01-01

    The objective of this paper is to impress upon the reader the benefits and advantages of investing in rapid prototyping (additive manufacturing) technology thru the procurement of one or two new rapid prototyping machines and the creation of a new Prototype and Model Lab at the Kennedy Space Center (KSC). This new resource will be available to all of United Space Alliance, LLC (USA), enabling engineers from around the company to pursue a more effective means of communication and design with our co-workers, and our customer, the National Aeronautics and Space Administration (NASA). The Rapid Protoyping/3D printing industry mirrors the transition the CAD industry made several years ago, when companies were trying to justify the expenditure of converting to a 3D based system from a 2D based system. The advantages of using a 3D system seemed to be outweighed by the cost it would take to convert not only legacy 2D drawings into 3D models but the training of personnel to use the 3D CAD software. But the reality was that when a 3D CAD system is employed, it gives engineers a much greater ability to conceive new designs and the ability to engineer new tools and products much more effectively. Rapid Prototyping (RP) is the name given to a host of related technologies that are used to fabricate physical objects directly from Computer Aided Design (CAD) data sources. These methods are generally similar to each other in that they add and bond materials in a layer wise-fashion to form objects, instead of machining away material. The machines used in Rapid Prototyping are also sometimes referred to as Rapid Manufacturing machines due to the fact that some of the parts fabricated in a RP machine can be used as the finished product. The name "Rapid Prototyping" is really a misnomer. It is much more than prototypes and it is not always rapid.

  19. Molar Pregnancy with a Co-Existing Viable Fetus

    Directory of Open Access Journals (Sweden)

    Ruya Deveer

    2014-03-01

    Full Text Available     The aim of this study was to report the clinical features, management, and outcome of a case of molar pregnancy with a coexisting viable fetus and to review the literature. In this article, we report a case of pregnancy with diffuse placental molar change and a normal fetus which presented with hyperemesis gravidarum and hyperthyroidism. Genetic amniocentesis showed normal fetal karyotype. A healthy full-term live male infant was delivered by cesarean section. In molar pregnancies with a normal karyotype fetus, with intensive maternal follow-up, continuation of pregnancy can be suggested.

  20. Rapid Prototyping Integrated With Nondestructive Evaluation and Finite Element Analysis

    Science.gov (United States)

    Abdul-Aziz, Ali; Baaklini, George Y.

    2001-01-01

    Most reverse engineering approaches involve imaging or digitizing an object then creating a computerized reconstruction that can be integrated, in three dimensions, into a particular design environment. Rapid prototyping (RP) refers to the practical ability to build high-quality physical prototypes directly from computer aided design (CAD) files. Using rapid prototyping, full-scale models or patterns can be built using a variety of materials in a fraction of the time required by more traditional prototyping techniques (refs. 1 and 2). Many software packages have been developed and are being designed to tackle the reverse engineering and rapid prototyping issues just mentioned. For example, image processing and three-dimensional reconstruction visualization software such as Velocity2 (ref. 3) are being used to carry out the construction process of three-dimensional volume models and the subsequent generation of a stereolithography file that is suitable for CAD applications. Producing three-dimensional models of objects from computed tomography (CT) scans is becoming a valuable nondestructive evaluation methodology (ref. 4). Real components can be rendered and subjected to temperature and stress tests using structural engineering software codes. For this to be achieved, accurate high-resolution images have to be obtained via CT scans and then processed, converted into a traditional file format, and translated into finite element models. Prototyping a three-dimensional volume of a composite structure by reading in a series of two-dimensional images generated via CT and by using and integrating commercial software (e.g. Velocity2, MSC/PATRAN (ref. 5), and Hypermesh (ref. 6)) is being applied successfully at the NASA Glenn Research Center. The building process from structural modeling to the analysis level is outlined in reference 7. Subsequently, a stress analysis of a composite cooling panel under combined thermomechanical loading conditions was performed to validate

  1. Development and Test of a Prototype 100MVA Superconducting Generator

    Energy Technology Data Exchange (ETDEWEB)

    Fogarty, James M.; Bray, James W.

    2007-05-25

    In 2002, General Electric and the US Department of Energy (DOE) entered into a cooperative agreement for the development of a commercialized 100 MVA generator using high temperature superconductors (HTS) in the field winding. The intent of the program was to: • Identify and develop technologies that would be needed for such a generator. • Develop conceptual designs for generators with ratings of 100 MVA and higher using HTS technology. • Perform proof of concept tests at the 1.5 MW level for GE’s proprietary warm iron rotor HTS generator concept. • Design, build, and test a prototype of a commercially viable 100 MVA generator that could be placed on the power grid. This report summarizes work performed during the program and is provided as one of the final program deliverables.

  2. NASA's Evolutionary Xenon Thruster (NEXT) Prototype Model 1R (PM1R) Ion Thruster and Propellant Management System Wear Test Results

    Science.gov (United States)

    VanNoord, Jonathan L.; Soulas, George C.; Sovey, James S.

    2010-01-01

    The results of the NEXT wear test are presented. This test was conducted with a 36-cm ion engine (designated PM1R) and an engineering model propellant management system. The thruster operated with beam extraction for a total of 1680 hr and processed 30.5 kg of xenon during the wear test, which included performance testing and some operation with an engineering model power processing unit. A total of 1312 hr was accumulated at full power, 277 hr at low power, and the remainder was at intermediate throttle levels. Overall ion engine performance, which includes thrust, thruster input power, specific impulse, and thrust efficiency, was steady with no indications of performance degradation. The propellant management system performed without incident during the wear test. The ion engine and propellant management system were also inspected following the test with no indication of anomalous hardware degradation from operation.

  3. The 1887 earthquake and tsunami in the Ligurian Sea: analysis of coastal effects studied by numerical modeling and prototype for real-time computing

    Science.gov (United States)

    Monnier, Angélique; Gailler, Audrey; Loevenbruck, Anne; Heinrich, Philippe; Hébert, Hélène

    2017-04-01

    The February 1887 earthquake in Italy (Imperia) triggered a tsunami well observed on the French and Italian coastlines. Tsunami waves were recorded on a tide gauge in the Genoa harbour with a small, recently reappraised maximum amplitude of about 10-12 cm (crest-to-trough). The magnitude of the earthquake is still debated in the recent literature, and discussed according to available macroseismic, tectonic and tsunami data. While the tsunami waveform observed in the Genoa harbour may be well explained with a magnitude smaller than 6.5 (Hébert et al., EGU 2015), we investigate in this study whether such source models are consistent with the tsunami effects reported elsewhere along the coastline. The idea is to take the opportunity of the fine bathymetric data recently synthetized for the French Tsunami Warning Center (CENALT) to test the 1887 source parameters using refined, nested grid tsunami numerical modeling down to the harbour scale. Several source parameters are investigated to provide a series of models accounting for various magnitudes and mechanisms. This allows us to compute the tsunami effects for several coastal sites in France (Nice, Villefranche, Antibes, Mandelieu, Cannes) and to compare with observations. Meanwhile we also check the computing time of the chosen scenarios to study whether running nested grids simulation in real time can be suitable in operational context in term of computational cost for these Ligurian scenarios. This work is supported by the FP7 ASTARTE project (Assessment Strategy and Risk Reduction for Tsunamis in Europe, grant 603839 FP7) and by the French PIA TANDEM (Tsunamis in the Atlantic and English ChaNnel: Definition of the Effects through Modeling) project (grant ANR-11-RSNR-00023).

  4. Project management strategies for prototyping breakdowns

    DEFF Research Database (Denmark)

    Granlien, Maren Sander; Pries-Heje, Jan; Baskerville, Richard

    2009-01-01

    , managing the explorative and iterative aspects of prototyping projects is not a trivial task. We examine the managerial challenges in a small scale prototyping project in the Danish healthcare sector where a prototype breakdown and project escalation occurs. From this study we derive a framework...... of strategies for coping with escalation in troubled prototyping projects; the framework is based on project management triangle theory and is useful when considering how to manage prototype breakdown and escalation. All strategies were applied in the project case at different points in time. The strategies led......Prototyping is often presented as a universal solution to many intractable information systems project problems. Prototyping is known to offer at least three advantages (1) provide users with a concrete understanding, (2) eliminate the confusion, (3) cope with uncertainty. On the other hand...

  5. Z-2 Prototype Space Suit Development

    Science.gov (United States)

    Ross, Amy; Rhodes, Richard; Graziosi, David; Jones, Bobby; Lee, Ryan; Haque, Bazle Z.; Gillespie, John W., Jr.

    2014-01-01

    NASA's Z-2 prototype space suit is the highest fidelity pressure garment from both hardware and systems design perspectives since the Space Shuttle Extravehicular Mobility Unit (EMU) was developed in the late 1970's. Upon completion the Z-2 will be tested in the 11 foot human-rated vacuum chamber and the Neutral Buoyancy Laboratory (NBL) at the NASA Johnson Space Center to assess the design and to determine applicability of the configuration to micro-, low- (asteroid), and planetary- (surface) gravity missions. This paper discusses the 'firsts' that the Z-2 represents. For example, the Z-2 sizes to the smallest suit scye bearing plane distance for at least the last 25 years and is being designed with the most intensive use of human models with the suit model.

  6. Prototype detection unit for the CHIPS experiment

    Science.gov (United States)

    Pfützner, Maciej M.

    2017-09-01

    CHIPS (CHerenkov detectors In mine PitS) is an R&D project aiming to develop novel cost-effective neutrino detectors, focused on measuring the CP-violating neutrino mixing phase (δ CP). A single detector module, containing an enclosed volume of purified water, would be submerged in an existing lake, located in a neutrino beam. A staged approach is proposed with first detectors deployed in a flooded mine pit in Northern Minnesota, 7 mrad off-axis from the existing NuMI beam. A small proof-of-principle model (CHIPS-M) has already been tested and the first stage of a fully functional 10 kt module (CHIPS-10) is planned for 2018. One of the instruments submerged on board of CHIPS-M in autumn 2015 was a prototype detection unit, constructed at Nikhef. The unit contains hardware borrowed from the KM3NeT experiment, including 16 3 inch photomultiplier tubes and readout electronics. In addition to testing the mechanical design and data acquisition, the detector was used to record a large sample of cosmic ray muon events. The collected data is valuable for characterising the cosmic muon background and validating a Monte Carlo simulation used to optimise future designs. This paper introduces the CHIPS project, describes the design of the prototype unit, and presents the results of a preliminary data analysis.

  7. The ATLAS IBL BOC Prototype

    CERN Document Server

    Schroer, N; Bruschi, M; Dantone, I; Dopke, J; Falchieri, D; Flick, T; Gabrielli, A; Grosse-Knetter, J; Heim, T; Joseph, J; Krieger, N; Kugel, A; Morettini, P; Neumann, M; Polini, A; Rizzi, M; Travaglini, R; Zannoli, S; Zoccoli, A

    2011-01-01

    The pixel detector of the ATLAS experiment at CERN will be upgraded with an additional layer (IBL) in 2013. To handle the data readout the currently used VME card pairs consisting of a back of crate card (BOC) and a read out driver (ROD) are being redesigned. This paper presents details of the hardware design of the new BOC prototype, which takes advantage from modern FPGA technology and commercial optical modules and abandons the need for a variety of custom components used on the old card. Also the throughput is four times higher and additional features are implemented.

  8. Rapid prototyping of robotic platforms

    CSIR Research Space (South Africa)

    De Ronde, Willis

    2016-11-01

    Full Text Available of thickness up to 200mm can be cut to create prototype chassis/ bodies or even the final product. One of the few limitations is the cutting of certain laminated materials, as this tends to produce delaminated cutting edges or even fractures in the case... mine inspection robot (Shongololo). Shongololo’s frame is made from engineering plastics while the chassis of Dassie was made from aluminium and cut using abrasive waterjet machining. The advantage of using abrasive waterjet machining is the speed...

  9. Recognizing human actions by learning and matching shape-motion prototype trees.

    Science.gov (United States)

    Jiang, Zhuolin; Lin, Zhe; Davis, Larry S

    2012-03-01

    A shape-motion prototype-based approach is introduced for action recognition. The approach represents an action as a sequence of prototypes for efficient and flexible action matching in long video sequences. During training, an action prototype tree is learned in a joint shape and motion space via hierarchical K-means clustering and each training sequence is represented as a labeled prototype sequence; then a look-up table of prototype-to-prototype distances is generated. During testing, based on a joint probability model of the actor location and action prototype, the actor is tracked while a frame-to-prototype correspondence is established by maximizing the joint probability, which is efficiently performed by searching the learned prototype tree; then actions are recognized using dynamic prototype sequence matching. Distance measures used for sequence matching are rapidly obtained by look-up table indexing, which is an order of magnitude faster than brute-force computation of frame-to-frame distances. Our approach enables robust action matching in challenging situations (such as moving cameras, dynamic backgrounds) and allows automatic alignment of action sequences. Experimental results demonstrate that our approach achieves recognition rates of 92.86 percent on a large gesture data set (with dynamic backgrounds), 100 percent on the Weizmann action data set, 95.77 percent on the KTH action data set, 88 percent on the UCF sports data set, and 87.27 percent on the CMU action data set.

  10. A Parallel 3d Model for The Multi-Species Low Energy BeamTransport System of the RIA Prototype ECR Ion Source Venus

    Energy Technology Data Exchange (ETDEWEB)

    Qiang, J.; Leitner, D.; Todd, D.

    2005-05-16

    The driver linac of the proposed Rare Isotope Accelerator (RIA) requires a great variety of high intensity, high charge state ion beams. In order to design and to optimize the low energy beamline optics of the RIA front end,we have developed a new parallel three-dimensional model to simulate the low energy, multi-species ion beam formation and transport from the ECR ion source extraction region to the focal plane of the analyzing magnet. A multisection overlapped computational domain has been used to break the original transport system into a number of each subsystem, macro-particle tracking is used to obtain the charge density distribution in this subdomain. The three-dimensional Poisson equation is solved within the subdomain and particle tracking is repeated until the solution converges. Two new Poisson solvers based on a combination of the spectral method and the multigrid method have been developed to solve the Poisson equation in cylindrical coordinates for the beam extraction region and in the Frenet-Serret coordinates for the bending magnet region. Some test examples and initial applications will also be presented.

  11. A Parallel 3D Model for the Multi-Species Low Energy Beam Transport System of the RIA Prototype ECR Ion Source VENUS

    CERN Document Server

    Qiang, Ji; Todd, Damon

    2005-01-01

    The driver linac of the proposed Rare Isotope Accelerator (RIA) requires a great variety of high intensity, high charge state ion beams. In order to design and optimize the low energy beam line optics of the RIA front end, we have developed a new parallel three-dimensional model to simulate the low energy, multi-species beam transport from the ECR ion source extraction region to the focal plane of the analyzing magnet. A multi-section overlapped computational domain has been used to break the original transport system into a number of independent subsystems. Within each subsystem, macro-particle tracking is used to obtain the charge density distribution in this subdomain. The three-dimensional Poisson equation is solved within the subdomain and particle tracking is repeated until the solution converges. Two new Poisson solvers based on a combination of the spectral method and the multigrid method have been developed to solve the Poisson equation in cylindrical coordinates for the beam extraction region and in...

  12. An Extension of the Hawkins and Simon Condition Characterizing Viable Techniques

    Directory of Open Access Journals (Sweden)

    Alberto Benítez Sánchez

    2015-01-01

    Full Text Available This paper discusses an extended version of the Hawkins and Simon condition which constitutes a synthetic formulation of the mathematical properties that viable economies must satisfy in single production models. The new version is implicit in the economic interpretations offered by them of the Hawkins and Simon condition, once a correction is introduced in one of those interpretations. Moreover, the paper details the meaning of the extended version following the interpretation of the original version proposed by Dorfman, Samuelson, and Solow. It also introduces a characteristic property of indecomposable matrices that has not previously been published.

  13. Development of a static bioactive stent prototype and dynamic aneurysm-on-a-chip(TM) model for the treatment of aneurysms

    Science.gov (United States)

    Reece, Lisa M.

    Aneurysms are pockets of blood that collect outside blood vessel walls forming dilatations and leaving arterial walls very prone to rupture. Current treatments include: (1) clipping, and (2) coil embolization, including stent-assisted coiling. While these procedures can be effective, it would be advantageous to design a biologically active stent, modified with magnetic stent coatings, allowing cells to be manipulated to heal the arterial lining. Further, velocity, pressure, and wall shear stresses aid in the disease development of aneurysmal growth, but the shear force mechanisms effecting wound closure is elusive. Due to these factors, there is a definite need to cultivate a new stent device that will aid in healing an aneurysm in situ. To this end, a static bioactive stent device was synthesized. Additionally, to study aneurysm pathogenesis, a lab-on-a-chip device (a dynamic stent device) is the key to discovering the underlying mechanisms of these lesions. A first step to the reality of a true bioactive stent involves the study of cells that can be tested against the biomaterials that constitute the stent itself. The second step is to test particles/cells in a microfluidic environment. Therefore, biocompatability data was collected against PDMS, bacterial nanocellulose (BNC), and magnetic bacterial nanocellulose (MBNC). Preliminary static bioactive stents were synthesized whereby BNC was grown to cover standard nitinol stents. In an offshoot of the original research, a two-dimensional microfluidic model, the Aneurysm-on-a-ChipTM (AOC), was the logical answer to study particle flow within an aneurysm "sac" - this was the dynamic bioactive stent device. The AOC apparatus can track particles/cells when it is coupled to a particle image velocimetry software (PIV) package. The AOC fluid flow was visualized using standard microscopy techniques with commercial microparticles/cells. Movies were taken during fluid flow experiments and PIV was utilized to monitor.

  14. Vitamin A deficiency impairs adaptive B and T cell responses to a prototype monovalent attenuated human rotavirus vaccine and virulent human rotavirus challenge in a gnotobiotic piglet model.

    Directory of Open Access Journals (Sweden)

    Kuldeep S Chattha

    Full Text Available Rotaviruses (RV are a major cause of gastroenteritis in children. Widespread vitamin A deficiency is associated with reduced efficacy of vaccines and higher incidence of diarrheal infections in children in developing countries. We established a vitamin A deficient (VAD gnotobiotic piglet model that mimics subclinical vitamin A deficiency in children to study its effects on an oral human rotavirus (HRV vaccine and virulent HRV challenge. Piglets derived from VAD and vitamin A sufficient (VAS sows were orally vaccinated with attenuated HRV or mock, with/without supplemental vitamin A and challenged with virulent HRV. Unvaccinated VAD control piglets had significantly lower hepatic vitamin A, higher severity and duration of diarrhea and HRV fecal shedding post-challenge as compared to VAS control pigs. Reduced protection coincided with significantly higher innate (IFNα cytokine and CD8 T cell frequencies in the blood and intestinal tissues, higher pro-inflammatory (IL12 and 2-3 fold lower anti-inflammatory (IL10 cytokines, in VAD compared to VAS control pigs. Vaccinated VAD pigs had higher diarrhea severity scores compared to vaccinated VAS pigs, which coincided with lower serum IgA HRV antibody titers and significantly lower intestinal IgA antibody secreting cells post-challenge in the former groups suggesting lower anamnestic responses. A trend for higher serum HRV IgG antibodies was observed in VAD vs VAS vaccinated groups post-challenge. The vaccinated VAD (non-vitamin A supplemented pigs had significantly higher serum IL12 (PID2 and IFNγ (PID6 compared to vaccinated VAS groups suggesting higher Th1 responses in VAD conditions. Furthermore, regulatory T-cell responses were compromised in VAD pigs. Supplemental vitamin A in VAD pigs did not fully restore the dysregulated immune responses to AttHRV vaccine or moderate virulent HRV diarrhea. Our findings suggest that that VAD in children in developing countries may partially contribute to more

  15. Toward high-resolution global topography of Mercury from MESSENGER orbital stereo imaging: A prototype model for the H6 (Kuiper) quadrangle

    Science.gov (United States)

    Preusker, Frank; Stark, Alexander; Oberst, Jürgen; Matz, Klaus-Dieter; Gwinner, Klaus; Roatsch, Thomas; Watters, Thomas R.

    2017-08-01

    We selected approximately 10,500 narrow-angle camera (NAC) and wide-angle camera (WAC) images of Mercury acquired from orbit by MESSENGER's Mercury Dual Imaging System (MDIS) with an average resolution of 150 m/pixel to compute a digital terrain model (DTM) for the H6 (Kuiper) quadrangle, which extends from 22.5°S to 22.5°N and from 288.0°E to 360.0°E. From the images, we identified about 21,100 stereo image combinations consisting of at least three images each. We applied sparse multi-image matching to derive approximately 250,000 tie-points representing 50,000 ground points. We used the tie-points to carry out a photogrammetric block adjustment, which improves the image pointing and the accuracy of the ground point positions in three dimensions from about 850 m to approximately 55 m. We then applied high-density (pixel-by-pixel) multi-image matching to derive about 45 billion tie-points. Benefitting from improved image pointing data achieved through photogrammetric block adjustment, we computed about 6.3 billion surface points. By interpolation, we generated a DTM with a lateral spacing of 221.7 m/pixel (192 pixels per degree) and a vertical accuracy of about 30 m. The comparison of the DTM with Mercury Laser Altimeter (MLA) profiles obtained over four years of MESSENGER orbital operations reveals that the DTM is geometrically very rigid. It may be used as a reference to identify MLA outliers (e.g., when MLA operated at its ranging limit) or to map offsets of laser altimeter tracks, presumably caused by residual spacecraft orbit and attitude errors. After the relevant outlier removals and corrections, MLA profiles show excellent agreement with topographic profiles from H6, with a root mean square height difference of only 88 m.

  16. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-08-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  17. A Computuerized Operator Support System Prototype

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boring, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lew, Roger [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ulrich, Tom [Idaho National Lab. (INL), Idaho Falls, ID (United States); Villim, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-11-01

    A report was published by the Idaho National Laboratory in September of 2012, entitled Design to Achieve Fault Tolerance and Resilience, which described the benefits of automating operator actions for transients. The report identified situations in which providing additional automation in lieu of operator actions would be advantageous. It recognized that managing certain plant upsets is sometimes limited by the operator’s ability to quickly diagnose the fault and to take the needed actions in the time available. Undoubtedly, technology is underutilized in the nuclear power industry for operator assistance during plant faults and operating transients. In contrast, other industry sectors have amply demonstrated that various forms of operator advisory systems can enhance operator performance while maintaining the role and responsibility of the operator as the independent and ultimate decision-maker. A computerized operator support system (COSS) is proposed for use in nuclear power plants to assist control room operators in addressing time-critical plant upsets. A COSS is a collection of technologies to assist operators in monitoring overall plant performance and making timely, informed decisions on appropriate control actions for the projected plant condition. The COSS does not supplant the role of the operator, but rather provides rapid assessments, computations, and recommendations to reduce workload and augment operator judgment and decision-making during fast-moving, complex events. This project proposes a general model for a control room COSS that addresses a sequence of general tasks required to manage any plant upset: detection, validation, diagnosis, recommendation, monitoring, and recovery. The model serves as a framework for assembling a set of technologies that can be interrelated to assist with each of these tasks. A prototype COSS has been developed in order to demonstrate the concept and provide a test bed for further research. The prototype is based

  18. Extending a User Interface Prototyping Tool with Automatic MISRA C Code Generation

    Directory of Open Access Journals (Sweden)

    Gioacchino Mauro

    2017-01-01

    Full Text Available We are concerned with systems, particularly safety-critical systems, that involve interaction between users and devices, such as the user interface of medical devices. We therefore developed a MISRA C code generator for formal models expressed in the PVSio-web prototyping toolkit. PVSio-web allows developers to rapidly generate realistic interactive prototypes for verifying usability and safety requirements in human-machine interfaces. The visual appearance of the prototypes is based on a picture of a physical device, and the behaviour of the prototype is defined by an executable formal model. Our approach transforms the PVSio-web prototyping tool into a model-based engineering toolkit that, starting from a formally verified user interface design model, will produce MISRA C code that can be compiled and linked into a final product. An initial validation of our tool is presented for the data entry system of an actual medical device.

  19. Suitability of virtual prototypes to support human factors/ergonomics evaluation during the design.

    Science.gov (United States)

    Aromaa, Susanna; Väänänen, Kaisa

    2016-09-01

    In recent years, the use of virtual prototyping has increased in product development processes, especially in the assessment of complex systems targeted at end-users. The purpose of this study was to evaluate the suitability of virtual prototyping to support human factors/ergonomics evaluation (HFE) during the design phase. Two different virtual prototypes were used: augmented reality (AR) and virtual environment (VE) prototypes of a maintenance platform of a rock crushing machine. Nineteen designers and other stakeholders were asked to assess the suitability of the prototype for HFE evaluation. Results indicate that the system model characteristics and user interface affect the experienced suitability. The VE system was valued as being more suitable to support the assessment of visibility, reach, and the use of tools than the AR system. The findings of this study can be used as a guidance for the implementing virtual prototypes in the product development process. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. Social Networking and Smart Technology: Viable Environmental Communication Tools…?

    Science.gov (United States)

    Montain, J.; Byrne, J. M.

    2010-12-01

    To what extent do popular social networking channels represent a viable means for disseminating information regarding environmental change to the general public? Are new forms of communication such as YouTube™, Facebook™, MySpace™ and Twitter™ and smart devices such as iPhone™ and BlackBerry™ useful and effective in terms motivating people into social action and behavioural modification; or do they simply pay ‘lip service’ to these pressing environmental issues? This project will explore the background connections between social networking and environmental communication and education; and outline why such tools might be an appropriate way to connect to a broad audience in an efficient and unconventional manner. Further, research will survey the current prevalence of reliable environmental change information on social networking Internet-based media; and finally, suggestions for improved strategies and new directions will be provided.

  1. Dissolvable tattoo sensors: from science fiction to a viable technology

    Science.gov (United States)

    Cheng, Huanyu; Yi, Ning

    2017-01-01

    Early surrealistic painting and science fiction movies have envisioned dissolvable tattoo electronic devices. In this paper, we will review the recent advances that transform that vision into a viable technology, with extended capabilities even beyond the early vision. Specifically, we focus on the discussion of a stretchable design for tattoo sensors and degradable materials for dissolvable sensors, in the form of inorganic devices with a performance comparable to modern electronics. Integration of these two technologies as well as the future developments of bio-integrated devices is also discussed. Many of the appealing ideas behind developments of these devices are drawn from nature and especially biological systems. Thus, bio-inspiration is believed to continue playing a key role in future devices for bio-integration and beyond.

  2. Simultaneous pyometra and viable puppies’ gestation in a bitch

    Directory of Open Access Journals (Sweden)

    A. Risso

    2014-08-01

    Full Text Available Here we describe a case of pyometra coexisting with gestation in a 4.5 year-old miniature short-haired Dachshund. The dog exhibited depression, vaginal discharge, polydipsia and dehydration. Ultrasound examination revealed the presence of low to moderate anechoic fluid collection in the left uterine horn. Blood analysis revealed mild neutrophilia with a left shift. Based on these findings a presumptive diagnosis of pyometra was made and the bitch was treated using amoxicillin-clavulanate with dopaminergic agonist (cabergoline. A second ultrasound scan revealed the presence of two gestational vesicles in the right uterine horn that were successfully carried to term. Unusually, while pyometra persisted in the left uterine horn, two viable puppies were delivered by caesarean section from the right uterine horn.

  3. Profiling Total Viable Bacteria in a Hemodialysis Water Treatment System.

    Science.gov (United States)

    Chen, Lihua; Zhu, Xuan; Zhang, Menglu; Wang, Yuxin; Lv, Tianyu; Zhang, Shenghua; Yu, Xin

    2017-05-28

    Culture-dependent methods, such as heterotrophic plate counting (HPC), are usually applied to evaluate the bacteriological quality of hemodialysis water. However, these methods cannot detect the uncultured or viable but non-culturable (VBNC) bacteria, both of which may be quantitatively predominant throughout the hemodialysis water treatment system. Therefore, propidium monoazide (PMA)-qPCR associated with HPC was used together to profile the distribution of the total viable bacteria in such a system. Moreover, high-throughput sequencing of 16S rRNA gene amplicons was utilized to analyze the microbial community structure and diversity. The HPC results indicated that the total bacterial counts conformed to the standards, yet the bacteria amounts were abruptly enhanced after carbon filter treatment. Nevertheless, the bacterial counts detected by PMA-qPCR, with the highest levels of 2.14 × 10 7 copies/100 ml in softener water, were much higher than the corresponding HPC results, which demonstrated the occurrence of numerous uncultured or VBNC bacteria among the entire system before reverse osmosis (RO). In addition, the microbial community structure was very different and the diversity was enhanced after the carbon filter. Although the diversity was minimized after RO treatment, pathogens such as Escherichia could still be detected in the RO effluent. In general, both the amounts of bacteria and the complexity of microbial community in the hemodialysis water treatment system revealed by molecular approaches were much higher than by traditional method. These results suggested the higher health risk potential for hemodialysis patients from the up-to-standard water. The treatment process could also be optimized, based on the results of this study.

  4. Developing an aerial manipulator prototype: physical interaction with the environment

    NARCIS (Netherlands)

    Fumagalli, Matteo; Naldi, Roberto; Macchelli, A.; Macchelli, Alessandro; Forte, Francesco; Keemink, Arvid Quintijn Leon; Stramigioli, Stefano; Carloni, Raffaella; Marconi, Lorenzo

    2014-01-01

    This article focuses on the design, modeling, and control of an aerial manipulator prototype, i.e., an innovative configuration consisting of a miniature quadrotor helicopter endowed with a robotic manipulator. The overall system is designed to accomplish operations that require physical interaction

  5. MOTION STUDY OF A WHEELCHAIR PROTOTYPE FOR DISABLED PEOPLE

    Directory of Open Access Journals (Sweden)

    Ionut GEONEA

    2015-05-01

    Full Text Available In this paper is presented the design and experimental prototype of a wheelchair for disabled people. Design solution proposed to be implemented uses two reduction gears motors and a mechanical transmission with chains. The motion controller developed uses PWM technology (pulse wave modulation. The wheelchair has the ability of forward – backward motion and steering. The design solution is developed in Solid Works, and it’s implemented to a wheelchair prototype model. Wheelchair design and motion makes him suitable especially for indoor use. It is made a study of the wheelchair kinematics, first using a kinematic simulation in Adams. Are presented the wheelchair motion trajectory and kinematics parameters. The experimental prototype is tested with a motion analysis system based on ultra high speed video recording. The obtained results from simulation and experimentally tests, demonstrate the efficiency of wheelchair proposed solution.

  6. Cell-free synthetic biology for in vitro prototype engineering.

    Science.gov (United States)

    Moore, Simon J; MacDonald, James T; Freemont, Paul S

    2017-06-15

    Cell-free transcription-translation is an expanding field in synthetic biology as a rapid prototyping platform for blueprinting the design of synthetic biological devices. Exemplar efforts include translation of prototype designs into medical test kits for on-site identification of viruses (Zika and Ebola), while gene circuit cascades can be tested, debugged and re-designed within rapid turnover times. Coupled with mathematical modelling, this discipline lends itself towards the precision engineering of new synthetic life. The next stages of cell-free look set to unlock new microbial hosts that remain slow to engineer and unsuited to rapid iterative design cycles. It is hoped that the development of such systems will provide new tools to aid the transition from cell-free prototype designs to functioning synthetic genetic circuits and engineered natural product pathways in living cells. © 2017 The Author(s).

  7. CALIFA Barrel prototype detector characterisation

    Energy Technology Data Exchange (ETDEWEB)

    Pietras, B., E-mail: benjamin.pietras@usc.es [Universidade de Santiago de Compostela, E-15782 (Spain); Gascón, M. [Universidade de Santiago de Compostela, E-15782 (Spain); Lawrence Berkeley National Laboratory, 1 Cyclotron Rd. Berkeley, CA 94701 (United States); Álvarez-Pol, H. [Universidade de Santiago de Compostela, E-15782 (Spain); Bendel, M. [Technische Universität München, 80333 (Germany); Bloch, T. [Technische Universität Darmstadt, D-64289 Darmstadt (Germany); Casarejos, E. [Universidade de Vigo, E-36310 (Spain); Cortina-Gil, D.; Durán, I. [Universidade de Santiago de Compostela, E-15782 (Spain); Fiori, E. [Gesellschaft für Schwerionenforschung (GSI), D-64291 Darmstadt (Germany); Gernhäuser, R. [Technische Universität München, 80333 (Germany); González, D. [Universidade de Santiago de Compostela, E-15782 (Spain); Kröll, T. [Technische Universität Darmstadt, D-64289 Darmstadt (Germany); Le Bleis, T. [Technische Universität München, 80333 (Germany); Montes, N. [Universidade de Santiago de Compostela, E-15782 (Spain); Nácher, E. [Instituto de Estructura de la Materia, CSIC, E-28006 Madrid (Spain); Robles, M. [Universidade de Santiago de Compostela, E-15782 (Spain); Perea, A. [Instituto de Estructura de la Materia, CSIC, E-28006 Madrid (Spain); Vilán, J.A. [Universidade de Vigo, E-36310 (Spain); Winkel, M. [Technische Universität München, 80333 (Germany)

    2013-11-21

    Well established in the field of scintillator detection, Caesium Iodide remains at the forefront of scintillators for use in modern calorimeters. Recent developments in photosensor technology have lead to the production of Large Area Avalanche Photo Diodes (LAAPDs), a huge advancement on traditional photosensors in terms of high internal gain, dynamic range, magnetic field insensitivity, high quantum efficiency and fast recovery time. The R{sup 3}B physics programme has a number of requirements for its calorimeter, one of the most challenging being the dual functionality as both a calorimeter and a spectrometer. This involves the simultaneous detection of ∼300MeV protons and gamma rays ranging from 0.1 to 20 MeV. This scintillator – photosensor coupling provides an excellent solution in this capacity, in part due to the near perfect match of the LAAPD quantum efficiency peak to the light output wavelength of CsI(Tl). Modern detector development is guided by use of Monte Carlo simulations to predict detector performance, nonetheless it is essential to benchmark these simulations against real data taken with prototype detector arrays. Here follows an account of the performance of two such prototypes representing different polar regions of the Barrel section of the forthcoming CALIFA calorimeter. Measurements were taken for gamma–ray energies up to 15.1 MeV (Maier-Leibnitz Laboratory, Garching, Germany) and for direct irradiation with a 180 MeV proton beam (The Svedberg Laboratoriet, Uppsala, Sweden). Results are discussed in light of complementary GEANT4 simulations. -- Highlights: •Prototypes corresponding to different sections of the forthcoming CALIFA Barrel calorimeter were tested. •The response to both high energy gamma rays and high energy protons was observed. •This response was reproduced by use of R3BROOT simulations, the geometry extrapolated to predict performance of the complete calorimeter. •Effects such as energy straggling of wrapping

  8. Study of neutrino production in the Cannonball model of Gamma ray bursts: possibility of observation of these neutrinos with the Antares neutrinos telescope, and study of the optical background recorded with the prototype sector line; Etude de la production de neutrinos associes aux Sursauts Gamma dans le modele du Boulet de canon: possibilite d'observation de ces neutrinos par le detecteur ANTARES, et etude du bruit de fond optique enregistre par le prototype d'un secteur de ligne

    Energy Technology Data Exchange (ETDEWEB)

    Ferry, S

    2004-09-15

    ANTARES is a future neutrino telescope which will be build at 40 km off the french coast (Toulon), at a 2500 m depth. The interaction of a neutrino with matter produces a muon which emits Cerenkov light while propagating in water. This light is detected with 900 photomultipliers distributed over 12 lines. Gamma ray bursts (GRB) are violent cosmological phenomenon observed once per day. In the Cannonball Model, bursts are produced by the interaction of a jet made of cannonballs (CB) with a supernova remnant (SNR). Forward shocks propagate in the SNR, reverse ones in the CB and neutrinos are produced at the shock fronts. An estimation of the neutrino production is given and is studied over a large parameter range. For a typical GRB, 0.002 to 0.3 v{sub {mu}}, cm{sup -2} can be produced. Depending on the viewing angle, ANTARES could detect 1 to 10 v{sub {mu}} per year in correlation with GRBs. The ambient optical background has been recorded by the ANTARES prototype sector line. The analysis is about the background influence on the detector performance and about the organisms activity which produces it. For example, it appears a 17.6 to 20.4 h periodicity which is compatible with the liquid masses movement imposed by the Coriolis force at the ANTARES latitude. (author)

  9. ¡VAMOS! (Viable Alternative Mine Operating System) - a 'Horizon 2020' project

    Science.gov (United States)

    Sword, Cameron; Bodo, Balazs; Kapusniak, Stef; Bosman, Frank; Rainbird, Jenny; Silva, Eduardo

    2017-04-01

    The 42-month ¡VAMOS! project (Viable Alternative Mine Operating System, Grant Agreement 642477, www.vamos-project.eu), funded by the EC H2020 Programme, will enable access to high-grade EU reserves of mineral ore-bodies by developing an innovative clean and low visibility mining technique. The project will demonstrate the technological and economic viability of the underwater extraction of metallic mineral deposits which are currently technologically, economically, and environmentally unobtainable. In doing so, ¡VAMOS! hopes to encourage investment in abandoned open-pit mines and prospective mines, helping to put the EU back on a level playing field with the rest of the world in terms of access to strategically important minerals. The ¡VAMOS! concept is defined by a remotely-operated underwater mining vehicle, adapted and improved from existing subsea mining technology. Operating in tandem with an HROV, the mining vehicle will connect to a flexible riser through which slurried mined material will be pumped from the mudline to onshore dewatering facilities via a floating mobile deployment-module, on which will be fitted a bypass system linked to an LIBS, allowing real-time grade-control. Analysis of European and national regulation and stakeholder assessments found there is significant support for developing the technology among local communities and governments. An initial environmental assessment of the potential impact of the innovative mining operation concluded the project has a smaller environmental footprint than conventional mining operations: this is due to factors including the quieter operation and absence of blasting, zero water-table flux, and the higher stripping ratio enabled by higher fluid pressure acting on the sidewalls of the mine. The prototypes are currently in their construction phase following a final design freeze in October 2016. Work is now underway on the foresight visioning, economic evaluation and policy guidelines for the

  10. Prediction of subsequent miscarriage risk in women who present with a viable pregnancy at the first early pregnancy scan.

    Science.gov (United States)

    Stamatopoulos, Nicole; Lu, Chuan; Casikar, Ishwari; Reid, Shannon; Mongelli, Max; Hardy, Nigel; Condous, George

    2015-10-01

    To generate and evaluate a new prediction model for miscarriage in women who present with a viable intrauterine pregnancy (IUP) at the primary early pregnancy scan and to compare this new model to a previously published model. Data were collected prospectively from women presenting to the early pregnancy unit with a viable IUP between November 2006 and January 2013. More than 30 historical, clinical and ultrasonographic variables were recorded on a standardised datasheet at the first visit. Women were followed until the final outcome was known at the end of the first trimester: viable IUP or miscarriage. A new multinomial logistic regression model was developed retrospectively on training cases and tested prospectively on test cases. The performance of the new prediction model was evaluated using receiver operating characteristic (ROC) curves and compared to a previously published model. After removing cases with missing values for the model of Oates, the area under the ROC curve (AUC) was also calculated for the new model and the Oates model. A total of 1115 consecutive first-trimester women presented to the early pregnancy unit. Eight hundred and sixty-two women with a viable IUP at the first scan whose outcome was known at the end of the first trimester were included in the final analysis. Five hundred and sixty-six women were included in the training set and 296 in the test set. 92.1% were viable and 7.9% had miscarried at the end of the first trimester. The most significant independent prognostic variables for the logistic regression model were as follows: maternal age, embryonic heart rate (EHR), logarithm [gestational sac (GS) volume/crown-rump length (CRL)], CRL and the presence or absence of clots per vagina (PV) at presentation. The performance of the new model compared with the Oates model gave an AUC of 0.870 vs 0.847 for the training set and 0.783 vs 0.744 for the test set. After removing cases with missing values for the model of Oates 2013, the

  11. Usage of Microsoft Kinect for augmented prototyping speed-up

    Directory of Open Access Journals (Sweden)

    Jaromír Landa

    2012-01-01

    Full Text Available Physical model is a common tool for testing of the product features during the design process. This model is usually made of clay or plastic because of the modifiability of these materials. Therefore, the designer could easily adjust the model shape to enhance the look or ergonomics of the product. Nowadays, some companies use augmented reality to enhance their design process. This concept is called augmented prototyping. Common approach uses artificial markers to augment the product prototype by digital 3D models. These 3D models that are shown on the markers positions can represent e.g. car spare parts such as different lights, wheels, spoiler etc. This allows the designer interactively change the look of the physical model. Further, it is also necessary to transfer physical adjustments made on the model surface back to the computer digital model. Well-known tool for this purpose a professional 3D scanner. Nevertheless, the cost of such scanner is substantial. Therefore, we focused on different solution – a motion capture device Microsoft Kinect that is used for computer games. This article outlines a new augmented prototyping approach that directly updates the digital model during the design process using Kinect depth camera. This solution is a cost effective alternative to the professional 3D scanners. Our article describes especially how depth data can be obtained by the Kinect and also provides an evaluation of depth measurement precision.

  12. Monophonic Instrument Playing Practice System Prototype

    OpenAIRE

    Haarahiltunen, Mika

    2013-01-01

    The goal of the project was to develop a prototype of a system that could be used for practicing the playing of breath instruments, such as flutes or saxophones. However, during the development process, the emphasis shifted from a breath instrument specific design towards a more generic design that could be used with any monophonic instrument. The development of the prototype included studying existing solutions, specifying the functional requirements and finally implementing the prototype. T...

  13. Prototype calorimeters for the NA3 experiment

    CERN Multimedia

    1975-01-01

    The NA3 Experiment was set-up on the North Area of the SPS by the CERN/ Ecole Polytechnique/College de France/ Orsay/Saclay Collaboration, to study high transverse momentum leptons and hadrons from hadron collisions. The calorimeters measured the energy of hadrons (prototype on the right) and leptons (prototype on the left). They used a new type of plastic scintillator (plexipop). (see CERN Courier of November 1975) energy (prototype on the right)

  14. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    Science.gov (United States)

    Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

    2016-01-01

    An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing. PMID:26981110

  15. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    Directory of Open Access Journals (Sweden)

    Na Li

    2016-01-01

    Full Text Available An integrate fabrication framework is presented to build heterogeneous objects (HEO using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combine the structure, material, and visualization in one process and give the digital model for manufacture. From the given model, it is concluded that the method is effective for HEO. Using microdroplet rapid prototyping and the model given in the paper HEO could be gotten basically. The model could be used in 3D biomanufacturing.

  16. Development of Wave Dragon from Scale 1:50 to Prototype

    DEFF Research Database (Denmark)

    Soerensen, H. C.; Friis-Madsen, E.; Panhauser, W.

    2003-01-01

    . In the period from 1998 to 2001 extensive testing on a scale 1:50 model was carried out. During the last month, testing has started on a prototype of the Wave Dragon in Nissum Bredning, Denmark (wave climate in scale 1:4.5 of the North Sea). The prototype has been grid connected in June 2003 as the world...

  17. OBTAINING POLYMERIC LUMINESCENT AND ULTRATHIN Eu3+ FILMS FROM LOW COST SPIN COATER PROTOTYPE

    OpenAIRE

    GALVÃO, R.; MENEZES, J. F; OLIVEIRA, V.

    2016-01-01

    In this article, we describe the development of an Arduino based low cost spin coater. The prototype was tested in the production of luminescent polymeric films with potential for the formation of waveguides. The films’ profilometry showed consistent results with mathematical models known for professional spin coaters, confirming the potential of the prototype.

  18. Hadron therapy information sharing prototype

    CERN Document Server

    Roman, Faustin Laurentiu; Kanellopoulos, Vassiliki; Amoros, Gabriel; Davies, Jim; Dosanjh, Manjit; Jena, Raj; Kirkby, Norman; Peach, Ken; Salt, Jose

    2013-01-01

    The European PARTNER project developed a prototypical system for sharing hadron therapy data. This system allows doctors and patients to record and report treatment-related events during and after hadron therapy. It presents doctors and statisticians with an integrated view of adverse events across institutions, using open-source components for data federation, semantics, and analysis. There is a particular emphasis upon semantic consistency, achieved through intelligent, annotated form designs. The system as presented is ready for use in a clinical setting, and amenable to further customization. The essential contribution of the work reported here lies in the novel data integration and reporting methods, as well as the approach to software sustainability achieved through the use of community-supported open-source components.

  19. LEP vacuum chamber, early prototype

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    The structure of LEP, with long bending magnets and little access to the vacuum chamber between them, required distributed pumping. This is an early prototype for the LEP vacuum chamber, made from extruded aluminium. The main opening is for the beam. The small channel to the right is for cooling water, to carry away the heat deposited by the synchroton radiation from the beam. The 4 slots in the channel to the left house the strip-shaped ion-getter pumps (see 7810255). The ion-getter pumps depended on the magnetic field of the bending magnets, too low at injection energy for the pumps to function well. Also, a different design was required outside the bending magnets. This design was therefore abandoned, in favour of a thermal getter pump (see 8301153 and 8305170).

  20. Hadron therapy information sharing prototype.

    Science.gov (United States)

    Roman, Faustin Laurentiu; Abler, Daniel; Kanellopoulos, Vassiliki; Amoros, Gabriel; Davies, Jim; Dosanjh, Manjit; Jena, Raj; Kirkby, Norman; Peach, Ken; Salt, Jose

    2013-07-01

    The European PARTNER project developed a prototypical system for sharing hadron therapy data. This system allows doctors and patients to record and report treatment-related events during and after hadron therapy. It presents doctors and statisticians with an integrated view of adverse events across institutions, using open-source components for data federation, semantics, and analysis. There is a particular emphasis upon semantic consistency, achieved through intelligent, annotated form designs. The system as presented is ready for use in a clinical setting, and amenable to further customization. The essential contribution of the work reported here lies in the novel data integration and reporting methods, as well as the approach to software sustainability achieved through the use of community-supported open-source components.

  1. Understanding immunology via engineering design: the role of mathematical prototyping.

    Science.gov (United States)

    Klinke, David J; Wang, Qing

    2012-01-01

    A major challenge in immunology is how to translate data into knowledge given the inherent complexity and dynamics of human physiology. Both the physiology and engineering communities have rich histories in applying computational approaches to translate data obtained from complex systems into knowledge of system behavior. However, there are some differences in how disciplines approach problems. By referring to mathematical models as mathematical prototypes, we aim to highlight aspects related to the process (i.e., prototyping) rather than the product (i.e., the model). The objective of this paper is to review how two related engineering concepts, specifically prototyping and "fitness for use," can be applied to overcome the pressing challenge in translating data into improved knowledge of basic immunology that can be used to improve therapies for disease. These concepts are illustrated using two immunology-related examples. The prototypes presented focus on the beta cell mass at the onset of type 1 diabetes and the dynamics of dendritic cells in the lung. This paper is intended to illustrate some of the nuances associated with applying mathematical modeling to improve understanding of the dynamics of disease progression in humans.

  2. APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY

    Directory of Open Access Journals (Sweden)

    Wiesław Kuczko

    2015-05-01

    Full Text Available The paper presents a method, developed by the authors, for manufacturing polymer composites with the matrix manufactured in a layered manner (via 3D printing – Fused Deposition Modeling out of a thermoplastic material. As an example of practical application of this method, functional prototypes are presented, which were used as elements of foundry tooling – patterns for sand molding. In case of manufacturing prototype castings or short series of products, foundries usually cooperate with modeling studios, which produce patterns by conventional, subtractive manufacturing technologies. If patterns have complex shapes, this results in high manufacturing costs and significantly longer time of tooling preparation. The method proposed by the authors allows manufacturing functional prototypes in a short time thanks to utilizing capabilities of additive manufacturing (3D printing technology. Thanks to using two types of materials simultaneously (ABS combined with chemically hardened resins, the produced prototypes are capable of carrying increased loads. Moreover, the method developed by the authors is characterized by manufacturing costs lower than in the basic technology of Fused Deposition Modeling. During the presented studies, the pattern was produced as a polymer composite and it was used to prepare a mold and a set of metal castings.

  3. Virtual design prototyping applied to medical facilities.

    Science.gov (United States)

    Breen, P T; Grinstein, G G; Leger, J R; Southard, D A; Wingfield, M A

    1996-01-01

    Over the past five years, MITRE has developed rapid 3D modeling and immersive environment capabilities that supports the application of virtual environment technology to many traditional and non-traditional domains [1]. This paper provides background information on these capabilities and describes the application of this technology to the experimental design prototyping of operating rooms of the future and to the design and retrofit of existing or proposed medical facilities. These capabilities employ contemporary commercial hardware and software and exploit stereoscopic projection displays and headsets. A unique user interface facilitates object manipulation within these immersive environments and addresses two key areas: 1) Visualization of the contents on the model server or library in a catalog form; and 2) Natural interaction and immersion of the user with the visualized catalog and selected visualized objects in a 3D synthetic environment. A brief discussion of two developing applications of this technology will be presented. In one application example, the modeling environment can be used to synthesize physical replicas (potentially full stereo scale) of actual surgical rooms used for training of medical personnel. Alternatively, it can be employed as the infrastructure for a new form of collaborative interactive visualization, namely, telesurgery. In another example, the rapid modeling capability provides designers, architects and medical personnel with a means of rapidly developing synthetic renderings of (potentially interactive and remotely operative) proposed medical facilities prior to construction. We also discuss key issues needing to be resolved for successful model interchange.

  4. Virtual Video Prototyping for Healthcare Systems

    DEFF Research Database (Denmark)

    Bardram, Jakob Eyvind; Bossen, Claus; Lykke-Olesen, Andreas

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...

  5. Virtual video prototyping of pervasive healthcare systems

    DEFF Research Database (Denmark)

    Bardram, Jakob; Bossen, Claus; Lykke-Olesen, Andreas

    2002-01-01

    Virtual studio technology enables the mixing of physical and digital 3D objects and thus expands the way of representing design ideas in terms of virtual video prototypes, which offers new possibilities for designers by combining elements of prototypes, mock-ups, scenarios, and conventional video....... In this article we report our initial experience in the domain of pervasive healthcare with producing virtual video prototypes and using them in a design workshop. Our experience has been predominantly favourable. The production of a virtual video prototype forces the designers to decide very concrete design...

  6. Modelling perceptual characteristics of prototype headphones

    DEFF Research Database (Denmark)

    Volk, Christer Peter; Bech, Søren; Pedersen, Torben Holm

    2016-01-01

    In this study the characteristics of compact loudspeakers in a stereo setup were investigated. Perceptual evaluations of eleven loudspeakers were conducted on the basis of six selected sensory descriptors, chosen by experienced listeners during consensus meetings. Based on an analysis of the perc...

  7. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate the w...

  8. Towards a viable and just global nursing ethics.

    Science.gov (United States)

    Crigger, Nancy J

    2008-01-01

    Globalization, an outgrowth of technology, while informing us about people throughout the world, also raises our awareness of the extreme economic and social disparities that exist among nations. As part of a global discipline, nurses are vitally interested in reducing and eliminating disparities so that better health is achieved for all people. Recent literature in nursing encourages our discipline to engage more actively with social justice issues. Justice in health care is a major commitment of nursing; thus questions in the larger sphere of globalization, justice and ethics, are our discipline's questions also. Global justice, or fairness, is not an issue for some groups or institutions, but a deeper human rights issue that is a responsibility for everyone. What can we do to help reduce or eliminate the social and economic disparities that are so evident? What kind of ethical milieu is needed to address the threat that globalization imposes on justice and fairness? This article enriches the conceptualization of globalization by investigating recent work by Schweiker and Twiss. In addition, I discuss five qualities or characteristics that will facilitate the development of a viable and just global ethic. A global ethic guides all people in their response to human rights and poverty. Technology and business, two major forces in globalization that are generally considered beneficial, are critiqued as barriers to social justice and the common good.

  9. Is Greenberg’s “Macro-Carib” viable?

    Directory of Open Access Journals (Sweden)

    Spike Gildea

    2007-08-01

    Full Text Available In his landmark work Language in the Americas, Greenberg (1987 proposed that Macro-Carib was one of the major low-level stocks of South America, which together with Macro-Panoan and Macro-Ge-Bororo were claimed to comprise the putative Ge-Pano-Carib Phylum. His Macro-Carib includes the isolates Andoke and Kukura, and the Witotoan, Peba-Yaguan, and Cariban families. Greenberg’s primary evidence came from person-marking paradigms in individual languages, plus scattered words from individual languages collected into 79 Macro-Carib ‘etymologies’ and another 64 Amerind ‘etymologies’. The goal of this paper is to re-evaluate Greenberg’s Macro-Carib claim in the light of the much more extensive and reliable language data that has become available largely since 1987. Based on full person-marking paradigms for Proto-Cariban, Yagua, Bora and Andoke, we conclude that Greenberg’s morphological claims are unfounded. For our lexical comparison, we created lexical lists for Proto-Cariban, Proto-Witotoan, Yagua and Andoke, for both Greenberg’s 143 putative etymologies and for the Swadesh 100 list. From both lists, a total of 23 potential cognates were found, but no consonantal correspondences were repeated even once. We conclude that our greatly expanded and improved database does not provide sufficient evidence to convince the skeptic that the Macro-Carib hypothesis is viable.

  10. Case-based anatomy teaching: a viable alternative?

    Science.gov (United States)

    Eseonu, Onyedikachi; Carachi, Robert; Brindley, Nicola

    2013-08-01

    Over the last two decades, there has been a decline in the amount of time available for anatomy teaching in the medical undergraduate curriculum, and new methods of anatomy teaching have been adopted for pragmatic reasons, with little evidence base to support their proposed educational benefits. This study seeks to establish the effect of a case-based teaching method on students' confidence in anatomy. Forty-three student volunteers in the clinical phase of the Glasgow medical course were given weekly anatomy teaching sessions based on clinical case presentations over 4 weeks. The students were given an anatomy test, and were asked to rate their confidence in their anatomy knowledge before and after the teaching sessions. There was a two-point increase in students' self-rated confidence, and a 10.9 per cent increase in average test score after the case-based anatomy teaching sessions. Both of these increases were statistically significant (p teaching was also highly rated by students, which may make it a viable option for the teaching of anatomy in the modern medical curriculum. © 2013 John Wiley & Sons Ltd.

  11. Protein design algorithms predict viable resistance to an experimental antifolate.

    Science.gov (United States)

    Reeve, Stephanie M; Gainza, Pablo; Frey, Kathleen M; Georgiev, Ivelin; Donald, Bruce R; Anderson, Amy C

    2015-01-20

    Methods to accurately predict potential drug target mutations in response to early-stage leads could drive the design of more resilient first generation drug candidates. In this study, a structure-based protein design algorithm (K* in the OSPREY suite) was used to prospectively identify single-nucleotide polymorphisms that confer resistance to an experimental inhibitor effective against dihydrofolate reductase (DHFR) from Staphylococcus aureus. Four of the top-ranked mutations in DHFR were found to be catalytically competent and resistant to the inhibitor. Selection of resistant bacteria in vitro reveals that two of the predicted mutations arise in the background of a compensatory mutation. Using enzyme kinetics, microbiology, and crystal structures of the complexes, we determined the fitness of the mutant enzymes and strains, the structural basis of resistance, and the compensatory relationship of the mutations. To our knowledge, this work illustrates the first application of protein design algorithms to prospectively predict viable resistance mutations that arise in bacteria under antibiotic pressure.

  12. SMA actuators: a viable practical technology (Presentation Video)

    Science.gov (United States)

    Browne, Alan L.; Brown, Jeffrey; Hodgson, Darel E.

    2015-04-01

    Diverse products either based solely on or incorporating Shape Memory Alloys (SMA) have and are being made in a wide range of industries, and IP is being captured. Why then compared to SE (superelastic) Nitinol, and especially conventional technology, do so few ideas reach production? This presentation delves deeply into this topic in reaching the final assessment that SMA actuators are indeed now a viable practical technology. The presentation begins with an introduction to and description of the fundamental basis of SMA actuator technology. Examples of multiple commercially available geometric forms of SMA actuators are given and the functionalities that they provide are described. This is followed by examples of multiple commercial products incorporating such SMA actuators. Given that there are literally millions of commercial products incorporating conventional actuator technologies, indications are given as to why there are their less than 1000 that utilize SMA. Experience based challenges to the commercial use of SMA actuators are described. Besides having to compete with existing non-SMA technology which is quite mature additional challenges that are unique to SM actuators are indicated these including a wider than expected set of technical engineering problems and challenges and that a broader scope of dynamics is required.

  13. Prototype Software for Automated Structural Analysis of Systems

    DEFF Research Database (Denmark)

    Jørgensen, A.; Izadi-Zamanabadi, Roozbeh; Kristensen, M.

    2004-01-01

    In this paper we present a prototype software tool that is developed to analyse the structural model of automated systems in order to identify redundant information that is hence utilized for Fault detection and Isolation (FDI) purposes. The dedicated algorithms in this software tool use a tri......-partite graph that represents the structural model of the system. A component-based approach has been used to address issues such as system complexity and recon¯gurability possibilities....

  14. Prototype Software for Automated Structural Analysis of Systems

    DEFF Research Database (Denmark)

    Jørgensen, A.; Izadi-Zamanabadi, Roozbeh; Kristensen, M.

    2004-01-01

    In this paper we present a prototype software tool that is developed to analyse the structural model of automated systems in order to identify redundant information that is hence utilized for Fault detection and Isolation (FDI) purposes. The dedicated algorithms in this software tool use a tri......-partite graph that represents the structural model of the system. A component-based approach has been used to address issues such as system complexity and reconfigurability possibilities....

  15. Simulation Support: Prototyping the Automation-Based Paradigm

    OpenAIRE

    Balci, Osman; Nance, Richard E.

    1987-01-01

    This paper describes our research efforts in prototyping the automation-based software paradigm to provide automated support for discrete-event simulation model development. The automation-based paradigm has been suggested as the software technology in the 1990's. The technology needed to support this paradigm does not yet exist. However, the benefits to be gained are so significant that, if achieved, it could profoundly change the way that simulation models are developed. We have been workin...

  16. Muon g-2 Calorimeter Prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Polly, Chris; /Fermilab

    2010-05-03

    The proposed design is a tungsten-scintillating fiber calorimeter with 35 segments, each read out by a separate PMT. Tungsten, which is significantly denser than lead, produces compact showers. This is necessary, in order to improve shower separation in analysis and to fully contain the showers within a calorimeter that satisfies the strict space constraints of the experiment. A single calorimeter segment (4 x 6 x 15 cm{sup 3}) has been constructed in order establish the feasibility of the new design and study its properties. Initial tests of the detector segment at the Paul Scherrer Institute were conducted with a low energy < 400 MeV/c electron beam. A higher-energy test with electrons up to a few GeV/c was performed at the Test Beam Facility under the experimental number T-967. All data from that test have been analyzed and published, and the tungsten-scintillating fiber calorimeter still appears to be a viable candidate. For this test beam run, a larger calorimeter (15 x 15 x 11 cm{sup 3}) has been constructed and an emphasis will be placed on understanding shower leakage and the ability to separate pileup events with a more granular readout. The experimenters will measure the energy resolution, linearity, and shower size of the calorimeter segment. This will provide important information for finalizing decisions on the angle of the fibers relative to the incoming electrons and the optimal granularity of the readout.

  17. Gamification in a Prototype Household Energy Game

    NARCIS (Netherlands)

    Fijnheer, J.D.L.; van Oostendorp, H.; Veltkamp, R.C.

    2016-01-01

    Research where gamification is used to influence household energy consumption is an emerging field. This paper reviews design features of the prototype Powersaver Game. The aim of this game is to influence household energy consumption in the long-term. The evaluation of the design of the prototype,

  18. Rapid Prototyping in Instructional Design: Creating Competencies

    Science.gov (United States)

    Fulton, Carolyn D.

    2010-01-01

    Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…

  19. All-printed smart structures: a viable option?

    Science.gov (United States)

    O'Donnell, John; Ahmadkhanlou, Farzad; Yoon, Hwan-Sik; Washington, Gregory

    2014-03-01

    The last two decades have seen evolution of smart materials and structures technologies from theoretical concepts to physical realization in many engineering fields. These include smart sensors and actuators, active damping and vibration control, biomimetics, and structural health monitoring. Recently, additive manufacturing technologies such as 3D printing and printed electronics have received attention as methods to produce 3D objects or electronic components for prototyping or distributed manufacturing purposes. In this paper, the viability of manufacturing all-printed smart structures, with embedded sensors and actuators, will be investigated. To this end, the current 3D printing and printed electronics technologies will be reviewed first. Then, the plausibility of combining these two different additive manufacturing technologies to create all-printed smart structures will be discussed. Potential applications for this type of all-printed smart structures include most of the traditional smart structures where sensors and actuators are embedded or bonded to the structures to measure structural response and cause desired static and dynamic changes in the structure.

  20. Viable Reserve Networks Arise From Individual Landholder Responses To Conservation Incentives

    Directory of Open Access Journals (Sweden)

    Kenneth M. Chomitz

    2006-12-01

    Full Text Available Conservation in densely settled biodiversity hotspots often requires setting up reserve networks that maintain sufficient contiguous habitat to support viable species populations. Because it is difficult to secure landholder compliance with a tightly constrained reserve network design, attention has shifted to voluntary incentive mechanisms, such as purchase of conservation easements by reverse auction or through a fixed-price offer. These mechanisms carry potential advantages of transparency, simplicity, and low cost. However, uncoordinated individual response to these incentives has been assumed incompatible with the conservation goal of viability, which depends on contiguous habitat and biodiversity representation. We model such incentives for southern Bahia in the Brazilian Atlantic Forest, one of the biologically richest and most threatened global biodiversity hotspots. Here, forest cover is spatially autocorrelated and associated with depressed land values, a situation that may be characteristic of long-settled areas with forests fragmented by agriculture. We find that in this situation, a voluntary incentive system can yield a reserve network characterized by large, viable patches of contiguous forest, and representation of subregions with distinct vegetation types and biotic assemblages, without explicit planning for those outcomes.

  1. In vitro and in vivo bioluminescent quantification of viable stem cells in engineered constructs.

    Science.gov (United States)

    Logeart-Avramoglou, Delphine; Oudina, Karim; Bourguignon, Marianne; Delpierre, Laetitia; Nicola, Marie-Anne; Bensidhoum, Morad; Arnaud, Eric; Petite, Herve

    2010-06-01

    Bioluminescent quantification of viable cells inside three-dimensional porous scaffolds was performed in vitro and in vivo. The assay quantified the bioluminescence of murine stem (C3H10T1/2) cells tagged with the luciferase gene reporter and distributed inside scaffolds of either soft, translucent, AN69 polymeric hydrogel or hard, opaque, coral ceramic materials. Quantitative evaluation of bioluminescence emitted from tagged cells adhering to these scaffolds was performed in situ using either cell lysates and a luminometer or intact cells and a bioluminescence imaging system. Despite attenuation of the signal when compared to cells alone, the bioluminescence correlated with the number of cells (up to 1.5 x 10(5)) present on each material scaffold tested, both in vitro and noninvasively in vivo (subcutaneous implants in the mouse model). The noninvasive bioluminescence measurement technique proved to be comparable to the cell-destructive bioluminescence measurement technique. Monitoring the kinetics of luciferase expression via bioluminescence enabled real-time assessment of cell survival and proliferation on the scaffolds tested over prolonged (up to 59 days) periods of time. This novel, sensitive, easy, fast-to-implement, quantitative bioluminescence assay has great, though untapped, potential for screening and determining noninvasively the presence of viable cells on biomaterial constructs in the tissue engineering and tissue regeneration fields.

  2. Feature to prototype transition in neural networks

    Science.gov (United States)

    Krotov, Dmitry; Hopfield, John

    Models of associative memory with higher order (higher than quadratic) interactions, and their relationship to neural networks used in deep learning are discussed. Associative memory is conventionally described by recurrent neural networks with dynamical convergence to stable points. Deep learning typically uses feedforward neural nets without dynamics. However, a simple duality relates these two different views when applied to problems of pattern classification. From the perspective of associative memory such models deserve attention because they make it possible to store a much larger number of memories, compared to the quadratic case. In the dual description, these models correspond to feedforward neural networks with one hidden layer and unusual activation functions transmitting the activities of the visible neurons to the hidden layer. These activation functions are rectified polynomials of a higher degree rather than the rectified linear functions used in deep learning. The network learns representations of the data in terms of features for rectified linear functions, but as the power in the activation function is increased there is a gradual shift to a prototype-based representation, the two extreme regimes of pattern recognition known in cognitive psychology. Simons Center for Systems Biology.

  3. Dissipative Prototyping Methods: A Manifesto

    Science.gov (United States)

    Beesley, P.

    Taking a designer's unique perspective using examples of practice in experimental installation and digital protoyping, this manifesto acts as provocation for change and unlocking new potential by encouraging changes of perspective about the material realm. Diffusive form-language is proposed as a paradigm for architectural design. This method of design is applied through 3D printing and related digital fabrication methods, offering new qualities that can be implemented in design of realms including present earth and future interplanetary environments. A paradigm shift is encouraged by questioning conventional notions of geometry that minimize interfaces and by proposing the alternatives of maximized interfaces formed by effusive kinds of formal composition. A series of projects from the Canadian research studio of the Hylozoic Architecture group are described, providing examples of component design methods employing diffusive forms within combinations of tension-integrity structural systems integrated with hybrid metabolisms employing synthetic biology. Cultural implications are also discussed, drawing from architectural theory and natural philosophy. The conclusion of this paper suggests that the practice of diffusive prototyping can offer formative strategies contributing to design of future living systems.

  4. Prototype Device For Multiwavelength Pyrometry

    Science.gov (United States)

    Hunter, Gordon B.; Allemand, Charly D.; Eagar, Thomas W.

    1986-11-01

    The Multichannel Infrared-Red Temperature Micro-Analyzer (MIRTMA) system is used to experimentally demonstrate the feasibility of a method of multiwavelength pyrometry using least-squares fitting analyses. The MIRTMA is a prototype instrument capable of monitoring temperatures above 1100 K with a spatial resolution of 100 um using spectral radiance measurements at approximately 200 wavelengths in a range of 0.6 to 0.8 um. Demonstrations of this equipment on a heated platinum strip source are described and discussed. The temperature measurements of these sources are generally within 5% of the actual temperature but can be within 1% using certain techniques. Capabilities and limitations of the method and the MIRTMA equipment are presented. The various calibrations used with the technique are also described, particularly with respect to corrections for the nonlinear response of the silicon intensified target (SIT) detector employed. Potential improvements to the instrument based on this work are presented, and it is concluded that the SIT detector should be replaced with a more suitable detector.

  5. Prototype device for multiwavelength pyrometry

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, G.B.; Allemand, C.D.; Eagar, T.W.

    1986-11-01

    The Multichannel Infrared-Red Temperature Micro-Analyzer (MIRTMA) system is used to experimentally demonstrate the feasibility of a method of multiwavelength pyrometry using least-squares fitting analyses. The MIRTMA is a prototype instrument capable of monitoring temperatures above 1100 K with a spatial resolution of 100 ..mu..m using spectral radiance measurements at approximately 200 wavelengths in a range of 0.6 t 0.8 ..mu..m. Demonstrations of this equipment on a heated platinum strip source are described and discussed. The temperature measurements of these sources are generally within 5% of the actual temperature but can be within 1% using certain techniques. Capabilities and limitations of the method and the MIRTMA equipment are presented. The various calibrations used with the technique are also described, particularly with respect to corrections for the nonlinear response of the silicon intensified target (SIT) detector employed. Potential improvements to the instrument based on this work are presented, and it is concluded that the SIT detector should be replaced with a more suitable detector.

  6. Acupuntura un tratamiento viable para las adicciones en Colombia

    Directory of Open Access Journals (Sweden)

    Hernán López-Suescún

    2013-09-01

    Full Text Available Resumen La acupuntura es una antigua técnica terapéutica desarrollada en China, que ha evidenciado ser efectiva en síntomas como las náuseas, vómito y dolor dentario. A pesar del sustento fisiológico que posibilitaría un uso efectivo en otras patologías, incluyendo el campo de las adicciones, los estudios son contradictorios, posiblemente por la diferencias de visión entre la medicina oriental y la occidental. El consumo de psicoactivos es un problema de salud pública en Colombia y en el mundo que genera grandes costos tangibles e intangibles, los cuales, en países desarrollados, puede llegar hasta el 1,6 % del PIB. En contraste, el beneficio económico del tratamiento de las adicciones, según las Naciones Unidas Contra la Droga y el Delito (UNODC, está entre 1:3 a 1:13; por lo tanto, cualquier esfuerzo que se realice en favor de los consumidores es una ganancia. Con base en estos datos, los organismos internacionales han generado políticas que ayudan a aminorar estos efectos. Colombia, como integrante de estos organismos, ha realizado varios compromisos para llevar a cabo dichas metas. Los tratamientos con auriculoterapia, como el protocolo NADA (National Acupuncture Detoxification Association, son los métodos más usados para las adicciones en el mundo, y aunque no se ha logrado evidenciar su efectividad, por su costo, facilidad y el poco riesgo de efectos adversos se hace viable en un país con pocos recursos económicos como Colombia.

  7. Optimizing classroom instruction through self-paced learning prototype

    Directory of Open Access Journals (Sweden)

    Romiro Gordo Bautista

    2015-09-01

    Full Text Available This study investigated the learning impact of self-paced learning prototype in optimizing classroom instruction towards students’ learning in Chemistry. Two sections of 64 Laboratory High School students in Chemistry were used as subjects of the study. The Quasi-Experimental and Correlation Research Design was used in the study: a pre-test was conducted, scored and analyzed which served as the basis in determining the initial learning schema of the respondents. A questionnaire was adopted to find the learning motivation of the students in science. Using Pearson-r correlation, it was found out that there is a highly significant relationship between their internal drive and their academic performance. Moreover, a post-test was conducted after self-paced learning prototype was used in the development of select topics in their curricular plot. It was found out that the students who experienced the self-paced learning prototype performed better in their academic performance as evidenced by the difference of their mean post-test results. ANCOVA results on the post-test mean scores of the respondents were utilized in establishing the causal-effect of the learning prototype to the academic performance of the students in Chemistry. A highly significant effect on their academic performance (R-square value of 70.7% and significant interaction of the models to the experimental grouping and mental abilities of the respondents are concluded in the study.

  8. Rapid prototyping--when virtual meets reality.

    Science.gov (United States)

    Beguma, Zubeda; Chhedat, Pratik

    2014-01-01

    Rapid prototyping (RP) describes the customized production of solid models using 3D computer data. Over the past decade, advances in RP have continued to evolve, resulting in the development of new techniques that have been applied to the fabrication of various prostheses. RP fabrication technologies include stereolithography (SLA), fused deposition modeling (FDM), computer numerical controlled (CNC) milling, and, more recently, selective laser sintering (SLS). The applications of RP techniques for dentistry include wax pattern fabrication for dental prostheses, dental (facial) prostheses mold (shell) fabrication, and removable dental prostheses framework fabrication. In the past, a physical plastic shape of the removable partial denture (RPD) framework was produced using an RP machine, and then used as a sacrificial pattern. Yet with the advent of the selective laser melting (SLM) technique, RPD metal frameworks can be directly fabricated, thereby omitting the casting stage. This new approach can also generate the wax pattern for facial prostheses directly, thereby reducing labor-intensive laboratory procedures. Many people stand to benefit from these new RP techniques for producing various forms of dental prostheses, which in the near future could transform traditional prosthodontic practices.

  9. Coscheduling in Clusters: Is It a Viable Alternative?

    Energy Technology Data Exchange (ETDEWEB)

    Choi, G S; Kim, J H; Ersoz, D; Yoo, A B; Das, C R

    2003-11-10

    than spin-based techniques like PB on a Linux platform. Third, the proposed HYBRID scheduling provides the best performance-energy behavior and can be implemented on any cluster with little effort. All these results suggest that blocking-based coscheduling techniques are viable candidates to be used instead of batching scheme for significant performance-energy benefits.

  10. Prototype testing for the Yucca Mountain Project

    Energy Technology Data Exchange (ETDEWEB)

    Kalia, H.N.; Oliver, R.D. [Los Alamos National Lab., NM (USA); Girdley, W.A. [USDOE Nevada Operations Office, Las Vegas, NV (USA). Yucca Mountain Project Office

    1990-02-01

    The US Department of Energy, through its Yucca Mountain Project Office, has been conducting prototype activities in welded and non-welded tuff. These activities are in preparation for characterization of the Yucca Mountain area, which is under consideration as a site for a geologic repository in which high-level nuclear waste could be safely stored. Investigators from organizations that will conduct the site investigation have been afforded opportunity, through the prototype program, to test, evaluate, and develop instruments, equipment, and methods. The Exploratory Shaft Facility will be used to collect significant amounts of underground site characterization data. The prototype tests are conducted under similar conditions. 3 refs., 4 figs.

  11. PROTOTYPICAL CATEGORIZATION - LINGUOCOGNITIVE FORM OF FLEXIBLE RATIONALITY

    Directory of Open Access Journals (Sweden)

    Svetlana Masalova

    2014-06-01

    Full Text Available The article discusses the prototypical categorization as linguocognitive form of the flexible rationality. Flexible rationality reveals the correlation of the rational and irrational in cognition. The embodiment form of the flexible linguistic consciousness is a concept as a category protoform. The process of formation of the conception from the concept is a prototypical categorization. Serving as the cognitive "tool", prototypical categorization as a linguistic structure demonstrates the perception integrity and meaning system of the cognizing subject as the ontic holistic bearer of the flexible rationality in unity of the anthropological and socio-cultural specifics.

  12. Unique Stealth Unmanned Aerial Vehicle (UAV) Houck Aircraft Design Program. Volume 2: Prototype Report

    National Research Council Canada - National Science Library

    Fry, Timothy

    2008-01-01

    ...; design of Preferred System Concept; and fabrication of flying prototype aircraft. Overall, this configuration, as modeled, was found not to have aerodynamic characteristics markedly better than existing small unmanned aircraft...

  13. Wormholes in viable f(R) modified theories of gravity and weak energy condition

    Energy Technology Data Exchange (ETDEWEB)

    Pavlovic, Petar [Universitaet Hamburg, II. Institut fuer Theoretische Physik, Hamburg (Germany); Sossich, Marko [University of Zagreb, Department of Physics, Faculty of Electrical Engineering and Computing, Zagreb (Croatia)

    2015-03-01

    In this work wormholes in viable f(R) gravity models are analyzed. We are interested in exact solutions for stress-energy tensor components depending on different shape and redshift functions. Several solutions of gravitational equations for different f(R) models are examined. The solutions found imply no need for exotic material, while this need is implied in the standard general theory of relativity. A simple expression for weak energy condition (WEC) violation near the throat is derived and analyzed. High curvature regime is also discussed, as well as the question of the highest possible values of the Ricci scalar for which the WEC is not violated near the throat, and corresponding functions are calculated for several models. The approach here differs from the one that has been common since no additional assumptions to simplify the equations have been made, and the functions in f(R) models are not considered to be arbitrary functions, but rather a feature of the theory that has to be evaluated on the basis of consistency with observations for the Solar System and cosmological evolution. Therefore in this work we show that the existence of wormholes without exotic matter is not only possible in simple arbitrary f(R) models, but also in models that are in accordance with empirical data. (orig.)

  14. Minimum Viable Product and the Importance of Experimentation in Technology Startups

    Directory of Open Access Journals (Sweden)

    Dobrila Rancic Moogk

    2012-03-01

    Full Text Available Entrepreneurs are often faced with limited resources in their quest to commercialize new technology. This article presents the model of a lean startup, which can be applied to an organization regardless of its size or environment. It also emphasizes the conditions of extreme uncertainty under which the commercialization of new technology is carried out. The lean startup philosophy advocates efficient use of resources by introducing a minimum viable product to the market as soon as possible in order to test its value and the entrepreneur’s growth projections. This testing is done by running experiments that examine the metrics relevant to three distinct types of the growth. These experiments bring about accelerated learning to help reduce the uncertainty that accompanies commercialization projects, thereby bringing the resulting new technology to market faster.

  15. Effect of myocardial revascularisation on left ventricular systolic function in patients with and without viable myocardium: should non-viable segments be revascularised?

    Science.gov (United States)

    Stipac, Alja Vlahovic; Stankovic, Ivan; Vidakovic, Radosav; Putnikovic, Biljana; Ilic, Ivan; Milicic, Biljana; Neskovic, Aleksandar N

    2013-12-01

    To assess the effect of surgical revascularisation on left ventricular (LV) systolic function in patients with viable and non-viable dysfunctional LV segments determined by low dose dobutamine stress echocardiography (DSE). Prospective observational cohort study. Single tertiary care centre. Consecutive patients referred to surgical revascularisation (n=115). DSE and surgical revascularisation. Functional recovery defined as increase in ejection fraction ≥ 5% 1 year after revascularisation in patients with and without viable myocardium (viability defined as improvement of contractility in ≥ 4 LV segments on DSE). The mean age, ejection fraction and wall motion score index (WMSi) of patients were 59 ± 9 years, 44 ± 9% and 1.82 ± 0.31, respectively. There was no difference between DSE positive and DSE negative patients for any of those parameters at baseline study (p>0.05 for all). After 12 months, the ejection fraction increased 11 ± 1% in patients with viable myocardium vs 7 ± 1% in patients without viable myocardium (p=0.002). Moreover, in patients with viable myocardium, the greatest increase of ejection fraction occurred 1 month after surgery (9 ± 1%), whereas in those patients with negative DSE the ejection fraction increased more gradually (2±1% after 1 month, p=0.002 between groups for 1 month vs preoperative value), but still improved after 12 months follow-up (pmyocardial revascularisation. Functional recovery continuously occurs throughout the first year after surgical treatment.

  16. Design Structuring and Allocation Optimization (Destination) Prototype Level I User’s Manual

    Science.gov (United States)

    1993-10-19

    34Index/Commands" box by pressing its button [CLOSE). R~ Inde-x I Commands Ell borne Deadutimef.. Adminisuration Mapa Clem COMAU Help 2 Cmatel...operated by this prototype. This pulldown menu consists of the following commands: Conceptual , Logical, Resource, and Implementation. Conceptual Model...Command This command instructs the DESTINATION prototype in performing only the operation that relates to the Conceptual Model. It is activated by

  17. Virtual Prototyping for Carbon Nanotubes and Their Compositions

    Science.gov (United States)

    Yakobson, Boris I.

    1999-01-01

    Carbon nanotubes (CNT) are of interest as constituents-reinforcements for composites, probes for scanning microscopy, quantum wires for electronics, and building blocks for nanomachinery. Their small size makes direct experimental measurements difficult. Therefore, the critical answers about their properties should be obtained based on adequate modeling, virtual prototyping, using the methods of classical molecular dynamic (MD), in combination with the analytical methods and continuum mechanics.

  18. The Starlite Project - Prototyping Real-Time Software.

    Science.gov (United States)

    1992-11-01

    by ONR under contract ledge of transactions and a temporal data model. A N00014-91-J-l 102, by DOE, and by NOSC. multiversion data object is one...environment. Section 4 presents experimentations of priority-based synchronization algorithms and multiversion data objects using the prototyping environment...priority-based .yn- chronization algorithms and between a multiversion database and its corresponding single- version database, through the sensitivity

  19. A hydrophone prototype for ultra high energy neutrino acoustic detection

    Science.gov (United States)

    Cotrufo, A.; Plotnikov, A.; Yershova, O.; Anghinolfi, M.; Piombo, D.

    2009-06-01

    The design of an air-backed fiber-optic hydrophone is presented. With respect to the previous models this prototype is optimized to provide a bandwidth sufficiently large to detect acoustic signals produced by high energy hadronic showers in water. In addiction to the geometrical configuration and to the choice of the materials, the preliminary results of the measured performances in air are presented.

  20. A prototype Malayalam to Sign Language Automatic Translator

    OpenAIRE

    Joy, Jestin; Balakrishnan, Kannan

    2014-01-01

    Sign language, which is a medium of communication for deaf people, uses manual communication and body language to convey meaning, as opposed to using sound. This paper presents a prototype Malayalam text to sign language translation system. The proposed system takes Malayalam text as input and generates corresponding Sign Language. Output animation is rendered using a computer generated model. This system will help to disseminate information to the deaf people in public utility places like ra...

  1. Design and development of a 3D cadastral prototype based on the LADM and 3D topology

    NARCIS (Netherlands)

    Ying, S.; Guo, R.; Li, L.; Van Oosterom, P.J.M.; Ledoux, H.; Stoter, J.E.

    2011-01-01

    In this paper the design and development of a prototype 3D Cadastral system will be presented. The key aspects of this system are that the model is based on Land Administration Domain Model (LADM) and that the spatial profile is based on a full 3D topological structure. The prototype development

  2. Homogeneity of Prototypical Attributes in Soccer Teams

    Directory of Open Access Journals (Sweden)

    Christian Zepp

    2015-09-01

    Full Text Available Research indicates that the homogeneous perception of prototypical attributes influences several intragroup processes. The aim of the present study was to describe the homogeneous perception of the prototype and to identify specific prototypical subcategories, which are perceived as homogeneous within sport teams. The sample consists of N = 20 soccer teams with a total of N = 278 athletes (age M = 23.5 years, SD = 5.0 years. The results reveal that subcategories describing the cohesiveness of the team and motivational attributes are mentioned homogeneously within sport teams. In addition, gender, identification, team size, and the championship ranking significantly correlate with the homogeneous perception of prototypical attributes. The results are discussed on the basis of theoretical and practical implications.

  3. System design document for the INFLO prototype.

    Science.gov (United States)

    2014-03-01

    This report documents the high level System Design Document (SDD) for the prototype development and : demonstration of the Intelligent Network Flow Optimization (INFLO) application bundle, with a focus on the Speed : Harmonization (SPD-HARM) and Queu...

  4. An Empirical Investigation of Architectural Prototyping

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius

    2010-01-01

    Architectural prototyping is the process of using executable code to investigate stakeholders’ software architecture concerns with respect to a system under development. Previous work has established this as a useful and cost-effective way of exploration and learning of the design space of a system...... and in addressing issues regarding quality attributes, architectural risks, and the problem of knowledge transfer and conformance. However, the actual industrial use of architectural prototyping has not been thoroughly researched so far. In this article, we report from three studies of architectural prototyping...... in practice. First, we report findings from an ethnographic study of practicing software architects. Secondly, we report from a focus group on architectural prototyping involving architects from four companies. And, thirdly, we report from a survey study of 20 practicing software architects and software...

  5. Presentation Trainer Prototype 1.0

    NARCIS (Netherlands)

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketch comprises the first prototype of the presentation trainer. The application uses the Microsoft Kinect sensor and was built using the Processing 1.5.1 development environment. Available under the GNU LGPL licence version 3 or higher.

  6. Power test for first prototype LIBO module

    CERN Multimedia

    Laurent Guiraud

    2000-01-01

    The Linac Booster (LIBO) is a prototype machine for producing particle beams for cancer therapy. Hadron therapy techniques are able to reach deep tumours with less damage to surrounding tissue than with conventional radiotherapy.

  7. GreenCraft Greenspoint House Prototype

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-02-16

    This case study describes a prototype house demonstrating energy efficiency and durability upgrades including an unvented roof with low density spray foam insulation and supplemental dehumidification, along with high performance windows and HVAC system.

  8. Norcal Prototype LNG Truck Fleet: Final Results

    Energy Technology Data Exchange (ETDEWEB)

    2004-07-01

    U.S. DOE and National Renewable Energy Laboratory evaluated Norcal Waste Systems liquefied natural gas (LNG) waste transfer trucks. Trucks had prototype Cummins Westport ISXG engines. Report gives final evaluation results.

  9. Prototyping a Rangeland Decision Support System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is submitted under the Innovative Tools and Techniques Supporting the Practical Uses of Earth Science Observations topic. We seek to create a prototype...

  10. User prototypes as partly unconscious communication

    DEFF Research Database (Denmark)

    Glasemann, Marie; Kanstrup, Anne Marie

    2010-01-01

    In this paper, we introduce user prototypes as a technique that supports users’ articulation of emotions relevant for design: dreams, fears, motivations – their feelings and aspirations. Following Bateson’s writings about communication through art, we consider user prototypes as “partly unconscious...... communication” and propose to analyze them by focusing on the emotional articulations integrated in the users’ design language. We illustrate this with an example from a design research project on designing learning technology for young diabetics. The example shows how young people with diabetes can express...... emotional themes related to youth identity, the burden of being young with a chronic illness, and the need to be connected and feel safe through design of prototypes. The new conceptual space that arises from user prototypes shows potential for addressing emotions when designing for health and for further...

  11. Prototype-based active learning for lemmatization

    CSIR Research Space (South Africa)

    Daelemans, W

    2009-09-01

    Full Text Available with the prototype-based active classification (PBAC) approach of Cebron & Berthold (2009), researchers investigate whether the basic PBAC assumption rings true for linguistic data. The NLP task, it addresses lemmatization, the reduction of inflected word forms...

  12. Implementation of a blockchain workflow management prototype

    OpenAIRE

    Fridgen, Gilbert; Sablowsky, Bernd; Urbach, Nils

    2017-01-01

    Blockchain technology offers huge potential to various industries and application areas. In a joint applied research project, Fraunhofer Institute for Applied Information Technology (FIT) together with Norddeutsche Landesbank (NORD/LB) identified (inter-company) workflow management as a promising application area and developed a Blockchain prototype for a documentary letter of credit in the international shipping business. In addition to the projects explicit outcome a Blockchain prototype an...

  13. Development and tendency of rapid prototyping technology

    Science.gov (United States)

    Yan, Yongnian; Hong, Guodong

    1998-08-01

    The definition of the rapid prototyping is given in this paper. Various RP processes, which build the prototypes with 2.5 or 3 dimensional layers, are introduced. The relative techniques of RP and the differences between RP technique and CNC manufacturing are analyzed. The paper discusses the RP's applied fields and methods and presents the RP development in the world. According to the idea that requirements determine the developing, the RP's tendency is discussed.

  14. Magnetic field map for a large TPC prototype

    Energy Technology Data Exchange (ETDEWEB)

    Grefe, Christian

    2008-12-15

    A new e{sup +}e{sup -} linear collider with an energy of up to 1000 GeV is currently being planned: the International Linear Collider (ILC). It will allow high precision measurements of the Higgs boson and physics beyond the Standard Model. In the Large Detector Concept (LDC) -which is one of the proposed detector concepts for the ILC- a Time Projection Chamber (TPC) is intended as the main tracking device. Within the EUDET project a large TPC prototype is currently being built as an infrastructure to test different gas amplification and readout technologies. The prototype will be operated in a 1T superconducting solenoid magnet -the PCMAG- at the DESY testbeam area. In order to reach the best possible track reconstruction the magnetic field has to be known very precisely throughout the TPC volume. The magnetic field of PCMAG has been measured in July 2007. In this work the creation of a high precision field map from the measurements is presented. The magnet and modelling techniques for its magnetic field are described. A model of the magnet has been created as a best fit from the measurements and its limitations are investigated. The field map will be included in the reconstruction software for the TPC prototype. (orig.)

  15. Experimental İnvestigation on a Prototype Solar-Wind Hybrid System with a Pico Hydro Turbine

    Science.gov (United States)

    Anilkumar, T. T.; P, Srinivasa Rao Nayak; Simon, Sishaj P.

    2017-09-01

    Rural electrification is often considered to be the backbone of the rural economy. In spite of launching of ambitious schemes to achieve 100% rural electrification, millions of people, particularly in rural areas are away from grid electricity and its benefits. Renewable energy sources (RES) coupled with pumped storage provides a technically viable solution for continuous power supply in remote areas. Therefore, this paper presents a solar-wind hybrid system with pumped storage generation unit to meet the basic load demands of domestic consumers, using Pico hydro turbine (PHT). A prototype of this system is developed in the laboratory and investigates its operational aspects. This scheme utilizes a PHT (300 W), usually employed in run-off river schemes, in domestic level application. The developed model is evaluated on sunny and cloudy day. It operates on a daily basis, storing the surplus energy from renewable sources by pumping water to an upper reservoir, and retrieve this energy through its PHT. Therefore, this system satisfies the basic load demands of domestic consumers who are away from access to the grid. The control and energy management of the proposed system is carried out using labVIEW.

  16. Grazing of particle-associated bacteria-an elimination of the non-viable fraction.

    Science.gov (United States)

    Gonsalves, Maria-Judith; Fernandes, Sheryl Oliveira; Priya, Madasamy Lakshmi; LokaBharathi, Ponnapakkam Adikesavan

    Quantification of bacteria being grazed by microzooplankton is gaining importance since they serve as energy subsidies for higher trophic levels which consequently influence fish production. Hence, grazing pressure on viable and non-viable fraction of free and particle-associated bacteria in a tropical estuary controlled mainly by protist grazers was estimated using the seawater dilution technique. In vitro incubations over a period of 42h showed that at the end of 24h, growth coefficient (k) of particle-associated bacteria was 9 times higher at 0.546 than that of free forms. Further, 'k' value of viable cells on particles was double that of free forms at 0.016 and 0.007, respectively. While bacteria associated with particles were grazed (coefficient of removal (g)=0.564), the free forms were relatively less grazed indicating that particle-associated bacteria were exposed to grazers in these waters. Among the viable and non-viable forms, 'g' of non-viable fraction (particle-associated bacteria=0.615, Free=0.0086) was much greater than the viable fraction (particle-associated bacteria=0.056, Free=0.068). Thus, grazing on viable cells was relatively low in both the free and attached states. These observations suggest that non-viable forms of particle-associated bacteria were more prone to grazing and were weeded out leaving the viable cells to replenish the bacterial standing stock. Particle colonization could thus be a temporary refuge for the "persistent variants" where the viable fraction multiply and release their progeny. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  17. Quantitative assessment of viable cells of Lactobacillus plantarum strains in single, dual and multi-strain biofilms.

    Science.gov (United States)

    Fernández Ramírez, Mónica D; Kostopoulos, Ioannis; Smid, Eddy J; Nierop Groot, Masja N; Abee, Tjakko

    2017-03-06

    Biofilms of Lactobacillus plantarum are a potential source for contamination and recontamination of food products. Although biofilms have been mostly studied using single species or even single strains, it is conceivable that in a range of environmental settings including food processing areas, biofilms are composed of multiple species with each species represented by multiple strains. In this study six spoilage related L. plantarum strains FBR1-FBR6 and the model strain L. plantarum WCFS1 were characterised in single, dual and multiple strain competition models. A quantitative PCR approach was used with added propidium monoazide (PMA) enabling quantification of intact cells in the biofilm, representing the viable cell fraction that determines the food spoilage risk. Our results show that the performance of individual strains in multi-strain cultures generally correlates with their performance in pure culture, and relative strain abundance in multi-strain biofilms positively correlated with the relative strain abundance in suspended (planktonic) cultures. Performance of individual strains in dual-strain biofilms was highly influenced by the presence of the secondary strain, and in most cases no correlation between the relative contributions of viable planktonic cells and viable cells in the biofilm was noted. The total biofilm quantified by CV staining of the dual and multi-strain biofilms formed was mainly correlated to CV values of the dominant strain obtained in single strain studies. However, the combination of strain FBR5 and strain WCFS1 showed significantly higher CV values compared to the individual performances of both strains indicating that total biofilm formation was higher in this specific condition. Notably, L. plantarum FBR5 was able to outgrow all other strains and showed the highest relative abundance in dual and multi-strain biofilms. All the dual and multi-strain biofilms contained a considerable number of viable cells, representing a potential

  18. Rapid Tooling via Investment Casting and Rapid Prototype Patterns

    Energy Technology Data Exchange (ETDEWEB)

    Baldwin, Michael D.

    1999-06-01

    The objective of this work to develop the materials processing and design technologies required to reduce the die development time for metal mold processes from 12 months to 3 months, using die casting of Al and Mg as the example process. Sandia demonstrated that investment casting, using rapid prototype patterns produced from Stereo lithography or Selective laser Sintering, was a viable alternative/supplement to the current technology of machining form wrought stock. A demonstration die insert (ejector halt) was investment cast and subsequently tested in the die casting environment. The stationary half of the die insert was machined from wrought material to benchmark the cast half. The two inserts were run in a die casting machine for 3,100 shots of aluminum and at the end of the run no visible difference could be detected between the cast and machined inserts. Inspection concluded that the cast insert performed identically to the machined insert. Both inserts had no indications of heat checking or degradation.

  19. A translational platform for prototyping closed-loop neuromodulation systems

    Directory of Open Access Journals (Sweden)

    Pedram eAfshar

    2013-01-01

    Full Text Available While modulating neural activity through stimulation is an effective treatment for neurological diseases such as Parkinson’s disease and essential tremor, an opportunity for improving neuromodulation therapy remains in automatically adjusting therapy to continuously optimize patient outcomes. Practical issues associated with achieving this include the paucity of human data related to disease states, poorly validated estimators of patient state, and unknown dynamic mappings of optimal stimulation parameters based on estimated states. To overcome these challenges, we present an investigational platform including: an implanted sensing and stimulation device to collect data and run automated closed-loop algorithms; an external tool to prototype classifier and control-policy algorithms; and real-time telemetry to update the implanted device firmware and monitor its state. The prototyping system was demonstrated in a chronic large animal model studying hippocampal dynamics. We used the platform to find biomarkers of the observed states and transfer functions of different stimulation amplitudes. Data showed that moderate levels of stimulation suppress hippocampal beta activity, while high levels of stimulation produce seizure-like after-discharge activity. The biomarker and transfer function observations were mapped into classifier and control-policy algorithms, which were downloaded to the implanted device to continuously titrate stimulation amplitude for the desired network effect. The platform is designed to be a flexible prototyping tool and could be used to develop improved mechanistic models and automated closed-loop systems for a variety of neurological disorders.

  20. Prototype Engineered Barrier System Field Tests; Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, A.L.; Beatty, J.; Buscheck, T.A.; Carlson, R.; Daily, W.; LaTorre, V.R.; Lee, K.; Lin, Wunan; Mao, Nai-hsien; Nitao, J.J.; Towse, D.; Ueng, Tzou-Shin; Watwood, D.; Wilder, D.

    1989-07-26

    This paper presents selected preliminary results obtained during the first 54 days of the Prototype Engineered Barrier System Field Tests (PEBSFT) that are being performed in G-Tunnel within the Nevada Test Site. The test described is a precursor to the Engineered Barrier Systems Field Tests (EBSFT). The EBSFT will consist of in situ tests of the geohydrologic and geochemical environment in the near field (within a few meters) of heaters emplaced in welded tuff to simulate the thermal effects of waste packages. The PEBSFTs are being conducted to evaluate the applicability of measurement techniques, numerical models, and procedures for future investigations that will be conducted in the Exploratory Shaft Facilities of the Yucca Mountain Project (YMP). The paper discusses the evolution of hydrothermal behavior during the prototype test, including rock temperatures, changes in rock moisture content, air permeability of fractures, gas pressures, and rock mass gas-phase humidity. 10 refs., 12 figs.