WorldWideScience

Sample records for vetted performance measures

  1. Student performance and satisfaction in continuous learning pathways in Dutch VET

    OpenAIRE

    Biemans, H.J.A.

    2012-01-01

    An important trend in the Vocational Education and Training (VET) system in the Netherlands is the design of continuous learning pathways enclosing more than one school type level. These continuous learning pathways are characterized by different design formats. In this study, the relations between these design formats and student performance and satisfaction were examined. Five coordinators and 161 students of five so-called Green Lycea (GL) in the life sciences domain, in which the elements...

  2. Student performance and satisfaction in continuous learning pathways in Dutch VET

    NARCIS (Netherlands)

    Biemans, H.J.A.

    2012-01-01

    An important trend in the Vocational Education and Training (VET) system in the Netherlands is the design of continuous learning pathways enclosing more than one school type level. These continuous learning pathways are characterized by different design formats. In this study, the relations between

  3. Measuring potential predictors of burnout and engagement among young veterinary professionals; construction of a customised questionnaire (the Vet-DRQ).

    Science.gov (United States)

    Mastenbroek, N J J M; Demerouti, E; van Beukelen, P; Muijtjens, A M M; Scherpbier, A J J A; Jaarsma, A D C

    2014-02-15

    The Job Demands-Resources model (JD-R model) was used as the theoretical basis of a tailormade questionnaire to measure the psychosocial work environment and personal resources of recently graduated veterinary professionals. According to the JD-R model, two broad categories of work characteristics that determine employee wellbeing can be distinguished: job demands and job resources. Recently, the JD-R model has been expanded by integrating personal resource measures into the model. Three semistructured group interviews with veterinarians active in different work domains were conducted to identify relevant job demands, job resources and personal resources. These demands and resources were organised in themes (constructs). For measurement purposes, a set of questions ('a priori scale') was selected from the literature for each theme. The full set of a priori scales was included in a questionnaire that was administered to 1760 veterinary professionals. Exploratory factor analysis and reliability analysis were conducted to arrive at the final set of validated scales (final scales). 860 veterinarians (73 per cent females) participated. The final set of scales consisted of seven job demands scales (32 items), nine job resources scales (41 items), and six personal resources scales (26 items) which were considered to represent the most relevant potential predictors of work-related wellbeing in this occupational group. The procedure resulted in a tailormade questionnaire: the Veterinary Job Demands and Resources Questionnaire (Vet-DRQ). The use of valid theory and validated scales enhances opportunities for comparative national and international research.

  4. Pedagogical practices in VET

    DEFF Research Database (Denmark)

    Louw, Arnt Vestergaard

    2013-01-01

    This article deals with pedagogical practices on the basic carpentry VET programme in Denmark. On the basis of an anthropologically inspired study among carpentry students at two VET schools, the prime objective of analysis is to understand the various pedagogical practices from the students...

  5. Partners Vetting System (PVS)

    Data.gov (United States)

    US Agency for International Development — PVS 2.0 is a database that supports vetting of NGOs and individuals to ensure that USAID-funded assistance does not inadvertently provide support to entities or...

  6. A validation of Hemo_Vet, a portable hemoglobinometer, in dogs

    Directory of Open Access Journals (Sweden)

    Ana Carolina Pereira

    2014-09-01

    Full Text Available Determinations of hemoglobin (Hb levels and packed cell volumes (PCV can be performed by various methods, including rapid testing using a portable hemoglobinometer. As a simple method that requires small blood samples and provides results in seconds, the utilization of portable hemoglobinometers has become increasingly widespread. The aim of this study was to evaluate the performance of the Hemo_ Vet, a portable hemoglobinometer, in Hb measurements and PCV determinations in dogs. A total of 100 blood samples were used to compare the Hb and PCV values provided by the Hemo_Vet with those obtained using an automatic hematology analyzer (BC2800VET and the microhematocrit technique. The Bland-Altman method was used for data analysis. Bland-Altman analysis revealed a high level of agreement between the Hb values obtained from the BC2800VET and those obtained using the Hemo_ Vet. The bias was close to zero (0.17, and although it was statistically significant (p = 0.0003, it unlikely would result in any clinically significant effects. The differences in the PCV values generated using the hemoglobinometer and the BC2800VET technique and those generated using the hemoglobinometer and microhematocrit technique exhibited a bias of 7.80 and 2.80, respectively, indicating a high degree of variability between these methods. In addition, the hemoglobinometer was not able to determine PCV values below 18% and above 59%. The precision, standard deviation and coefficients of variation for the device all showed low variation. These results indicate that the hemoglobinometer exhibits good precision and fulfills its primary purpose, which is to measure Hb levels. However, this device was less effective in determining PCV values, where it exhibited high level of variation in both methods of comparison. These results revealed the need to change the conversion factor for estimations of PCV values from 2.94 to 3.54 for dogs

  7. Differentiated teaching at VET

    DEFF Research Database (Denmark)

    Andreasen, Karen Egedal; Duch, Henriette

    from backgrounds with no tradition for education. Despite historical changes, the education as vocational college teacher also struggles with the interplay between theory and practice in the program and great diversity among vocational college teachers. Based on empirical data from focus group......A new education program, Diploma of Vocational Pedagogy, has recently been implemented in Denmark to upskill vocational college teachers and improve didactics at VET colleges in general. Among many challenges, vocational college teachers have to adapt their pedagogy to a large number of students...... interviews with students from the Diploma of Vocational Pedagogy program and concepts developed by Bernstein and Bourdieu, the article analyzes how these aspects might affect the development of new vocational didactics. We know that it is not easy to change the culture of educational institutions...

  8. Measuring potential predictors of burnout and engagement among young veterinary professionals; construction of a customised questionnaire (the Vet-DRQ)

    NARCIS (Netherlands)

    Mastenbroek, N. J. J. M.; Demerouti, E.; van Beukelen, P.; Muijtjens, A. M. M.; Scherpbier, A. J. J. A.; Jaarsma, A. D. C.; Jaarsma, Debbie

    2014-01-01

    The Job Demands-Resources model (JD-R model) was used as the theoretical basis of a tailormade questionnaire to measure the psychosocial work environment and personal resources of recently graduated veterinary professionals. According to the JD-R model, two broad categories of work characteristics

  9. Measuring potential predictors of burnout and engagement among young veterinary professionals : construction of a customised questionnaire (the Vet-DRQ).

    NARCIS (Netherlands)

    Mastenbroek, N.J.J.M.; Demerouti, E.; Beukelen, van P.; Muijtjens, A.M.M.; Scherpbier, A.J.J.A.; Jaarsma, A.D.C.

    2014-01-01

    The Job Demands-Resources model (JD-R model) was used as the theoretical basis of a tailormade questionnaire to measure the psychosocial work environment and personal resources of recently graduated veterinary professionals. According to the JD-R model, two broad categories of work characteristics

  10. Developing Effective Performance Measures

    Science.gov (United States)

    2014-10-14

    University When Performance Measurement Goes Bad Laziness Vanity Narcissism Too Many Pettiness Inanity 52 Developing Effective...Kasunic, October 14, 2014 © 2014 Carnegie Mellon University Narcissism Measuring performance from the organization’s point of view, rather than from

  11. Performance Measurement und Environmental Performance Measurement

    OpenAIRE

    Sturm, Anke

    2000-01-01

    Die Zielsetzung der vorliegenden Dissertationsschrift besteht in der Entwicklung einer systematisierten Vorgehensweise, eines Controllingmodells, zur unternehmensinternen Umweltleistungsmessung. Das entwickelte Environmental Performance Measurement (EPM)-Modell umfaßt die fünf Stufen Festlegung der Ziele der Umweltleistungsmessung (1. Stufe), Erfassung der Umwelteinflüsse nach der ökologischen Erfolgsspaltung (2. Stufe), Bewertung der Umwelteinflüsse auf der Grundlage des qualitätszielbezogen...

  12. Hidden expectations within the Danish VET system

    DEFF Research Database (Denmark)

    Hjort-Madsen, Peder

    Researching the pressing retention and dropout problems of the Danish VET system (app. 20 pct. of a year group never achieve an upper secondary education) this paper takes its point of departure in the hypothesis that low performing students are kept in a marginal position (at the risk of dropping....../education isn’t a negotiable path for them. The theoretical approach of this paper draws on inspiration from Paul Willis (Learning to labour, 1979) and Donald Broady (Den dolda läroplanen, 1981). The goal is to revitalize and develop the work of Willis and Broady in the context of the current retention and drop...

  13. Hidden expectations within the Danish VET system

    DEFF Research Database (Denmark)

    Hjort-Madsen, Peder

    2015-01-01

    Researching the pressing retention and dropout problems of the Danish VET system (app. 20 pct. of a year group never achieve an upper secondary education) this paper takes its point of departure in the hypothesis that low performing students are kept in a marginal position (at the risk of dropping....../education isn’t a negotiable path for them. The theoretical approach of this paper draws on inspiration from Paul Willis (Learning to labour, 1979) and Donald Broady (Den dolda läroplanen, 1981). The goal is to revitalize and develop the work of Willis and Broady in the context of the current retention and drop...

  14. Humans Need Not Apply: Robotization of Kepler Planet Candidate Vetting

    Science.gov (United States)

    Coughlin, Jeffrey; Mullally, Fergal; Thompson, Susan E.; Kepler Team

    2015-01-01

    Until now, the vast majority of Kepler planet candidate vetting has been performed by a dedicated team of humans. While human expertise has been invaluable in understanding the nuances of Kepler data, human vetting is very time-consuming and can be inconsistent. Over 20,000 threshold crossing events have been produced by the latest pipeline run on all 17 quarters of Kepler mission data, and many more artificial planet transits have been injected to estimate completeness. Given these large numbers, human vetting is no longer feasible on a reasonable time-scale, and would be difficult to characterize. We have created automated vetting programs known as "robovetters" that are specifically designed to mimic the decision-making process employed by the humans. They analyze both the light curve and pixel-level data in order to produce specific reasons for identifying false positives. We present benchmark tests on the Q1-Q16 Kepler planet catalog, which was vetted by humans, and present preliminary robovetter results based on a recent transit-search of the newly reprocessed Q1-Q17 data set.

  15. Performance Measurement at Universities

    DEFF Research Database (Denmark)

    Lueg, Klarissa

    2014-01-01

    This paper proposes empirical approaches to testing the reliability, validity, and organizational effectiveness of student evaluations of teaching (SET) as a performance measurement instrument in knowledge management at the institutional level of universities. Departing from Weber’s concept...

  16. The performance measurement manifesto.

    Science.gov (United States)

    Eccles, R G

    1991-01-01

    The leading indicators of business performance cannot be found in financial data alone. Quality, customer satisfaction, innovation, market share--metrics like these often reflect a company's economic condition and growth prospects better than its reported earnings do. Depending on an accounting department to reveal a company's future will leave it hopelessly mired in the past. More and more managers are changing their company's performance measurement systems to track nonfinancial measures and reinforce new competitive strategies. Five activities are essential: developing an information architecture; putting the technology in place to support this architecture; aligning bonuses and other incentives with the new system; drawing on outside resources; and designing an internal process to ensure the other four activities occur. New technologies and more sophisticated databases have made the change to nonfinancial performance measurement systems possible and economically feasible. Industry and trade associations, consulting firms, and public accounting firms that already have well-developed methods for assessing market share and other performance metrics can add to the revolution's momentum--as well as profit from the business opportunities it presents. Every company will have its own key measures and distinctive process for implementing the change. But making it happen will always require careful preparation, perseverance, and the conviction of the CEO that it must be carried through. When one leading company can demonstrate the long-term advantage of its superior performance on quality or innovation or any other nonfinancial measure, it will change the rules for all its rivals forever.

  17. The VET System and Industrial SMEs: The Role of Employees with VET Qualifications in Innovation Processes

    Science.gov (United States)

    Brunet Icart, Ignasi; Rodríguez-Soler, Joan

    2017-01-01

    Reforms of the vocational education and training (VET) system in Spain are committed to a closer relationship between the VET system and companies' needs. One of these needs is for a greater contribution of the VET system to innovation in companies, especially SMEs, which have limited resources to innovate. This contribution could materialise…

  18. Developing VET Applied Research: Steps towards Enhancing VET's Role in the Innovation System

    Science.gov (United States)

    Beddie, Francesca M.; Simon, Linda

    2017-01-01

    The VET sector is under pressure from the exponential increase in university places. This, on top of cutbacks to government funding over the last decade and a lack of clarity about VET's role now that it is squeezed between universities and schools, has led to a precarious position for the VET sector and the need to consider changes to traditional…

  19. International Education Policy: Its Influence on the Conception of VET and the VET System in Germany

    Science.gov (United States)

    Deissinger, Thomas

    2015-01-01

    Inquiries into vocational education and training (VET) systems are normally characterised by looking at institutions and steering mechanisms. That aside, however, it is culture which underlies both the practice and the theory as well as the policy of VET in various countries. Specific problems arise when it comes to harmonising VET systems through…

  20. Enterprise performance measurement systems

    Directory of Open Access Journals (Sweden)

    Milija Bogavac

    2014-10-01

    Full Text Available Performance measurement systems are an extremely important part of the control and management actions, because in this way a company can determine its business potential, its market power, potential and current level of business efficiency. The significance of measurement consists in influencing the relationship between the results of reproduction (total volume of production, value of production, total revenue and profit and investments to achieve these results (factors of production spending and hiring capital in order to achieve the highest possible quality of the economy. (The relationship between the results of reproduction and investment to achieve them quantitatively determines economic success as the quality of the economy. Measuring performance allows the identification of the economic resources the company has, so looking at the key factors that affect its performance can help to determine the appropriate course of action.

  1. Productivity and Performance Measurement

    DEFF Research Database (Denmark)

    Hald, Kim Sundtoft; Spring, Martin

    This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

  2. Measuring Firm Performance

    DEFF Research Database (Denmark)

    Assaf, A. George; Josiassen, Alexander; Gillen, David

    2014-01-01

    Set in the airport industry, this paper measures firm performance using both desirable and bad outputs (i.e. airport delays). We first estimate a model that does not include the bad outputs and then a model that includes bad outputs. The results show important differences in the efficiency...

  3. Benchmarking and Performance Measurement.

    Science.gov (United States)

    Town, J. Stephen

    This paper defines benchmarking and its relationship to quality management, describes a project which applied the technique in a library context, and explores the relationship between performance measurement and benchmarking. Numerous benchmarking methods contain similar elements: deciding what to benchmark; identifying partners; gathering…

  4. Explaining the VET Applied Research Developmental Framework

    Science.gov (United States)

    Simon, Linda; Beddie, Francesca M.

    2017-01-01

    This document explains the VET Applied Research Developmental Framework, created as part of a project that explored how the vocational education and training (VET) sector could broaden its engagement in Australia's research and development (R&D) and innovation systems. Achieving this engagement will rely significantly on building the…

  5. VET workers’ problem-solving skills in technology-rich environments: European approach

    Directory of Open Access Journals (Sweden)

    Raija Hämäläinen

    2014-08-01

    Full Text Available The European workplace is challenging VET adults’ problem-solving skills in technology-rich environments (TREs. So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults’ skills to date. The present study (N=50 369 focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults’ problem-solving skills in TREs across 11 European countries, two main trends can be observed. First, our results show that only a minority of VET adults perform at a high level. Second, there seems to be substantial variation between countries with respect to the proportion of VET adults that can be identified as “at-risk” or “weak” performers. For the future, our findings indicate the variations that can be used as a starting point to identify beneficial VET approaches.

  6. VET in practice - and in politics

    DEFF Research Database (Denmark)

    Koudahl, Peter

    2016-01-01

    This draft paper addresses the issue of building the bridges between VET politics, practice and research and contributes to the ambition of making evidence based policy making possible. The examples derive from the Danish context but the principle of understanding and analyzing VET politics...... countries functions in practice most attempts political intervention has little or no effect. In other words the basic principles on which VET is founded are more or less resistant to outside interventions (Koudahl 2006). One example is the discussion on how to provide a sufficient number of company based...

  7. Using Technical Performance Measures

    Science.gov (United States)

    Garrett, Christopher J.; Levack, Daniel J. H.; Rhodes, Russel E.

    2011-01-01

    All programs have requirements. For these requirements to be met, there must be a means of measurement. A Technical Performance Measure (TPM) is defined to produce a measured quantity that can be compared to the requirement. In practice, the TPM is often expressed as a maximum or minimum and a goal. Example TPMs for a rocket program are: vacuum or sea level specific impulse (lsp), weight, reliability (often expressed as a failure rate), schedule, operability (turn-around time), design and development cost, production cost, and operating cost. Program status is evaluated by comparing the TPMs against specified values of the requirements. During the program many design decisions are made and most of them affect some or all of the TPMs. Often, the same design decision changes some TPMs favorably while affecting other TPMs unfavorably. The problem then becomes how to compare the effects of a design decision on different TPMs. How much failure rate is one second of specific impulse worth? How many days of schedule is one pound of weight worth? In other words, how to compare dissimilar quantities in order to trade and manage the TPMs to meet all requirements. One method that has been used successfully and has a mathematical basis is Utility Analysis. Utility Analysis enables quantitative comparison among dissimilar attributes. It uses a mathematical model that maps decision maker preferences over the tradeable range of each attribute. It is capable of modeling both independent and dependent attributes. Utility Analysis is well supported in the literature on Decision Theory. It has been used at Pratt & Whitney Rocketdyne for internal programs and for contracted work such as the J-2X rocket engine program. This paper describes the construction of TPMs and describes Utility Analysis. It then discusses the use of TPMs in design trades and to manage margin during a program using Utility Analysis.

  8. Strategic Measures of Teacher Performance

    Science.gov (United States)

    Milanowski, Anthony

    2011-01-01

    Managing the human capital in education requires measuring teacher performance. To measure performance, administrators need to combine measures of practice with measures of outcomes, such as value-added measures, and three measurement systems are needed: classroom observations, performance assessments or work samples, and classroom walkthroughs.…

  9. Monitoring VET Systems of Major EU Competitor Countries - The Cases of China, India, Russia and Korea

    OpenAIRE

    Ruth, Klaus

    2009-01-01

    The study on VET systems of major EU competitor countries is based on the objective of the (revised) Lisbon agenda to become the most competitive region of the world based on a knowledge driven production and social cohesion. Building on experts opinion and literature research this study aims at monitoring VET policies in China, India, Russia and Korea. The study analyses five themes which are assumed to be of outstanding importance for understanding the current performance and the developing...

  10. Partner Vetting System - Gaza & West Bank

    Data.gov (United States)

    US Agency for International Development — The PVS WB system supports the vetting of NGOs, their employees, and individuals who apply for USAID contracts, grants, cooperative agreements, or other funding...

  11. Vetting requests for body computed tomography

    International Nuclear Information System (INIS)

    Harrison, R.L.; Housden, B.; Hay, C.; Dixon, A.K.

    2000-01-01

    The aim of this study was to assess the process and outcome of hospitalised patients (inpatients) for whom whole-body CT was requested but not performed. For 6 months the reasons why CT was not performed were recorded, together with relevant discussions with clinicians. Subsequent referrals for alternative investigations were noted. The eventual outcome of the patients was monitored via the patients' records. Eighty-three (8 %) of 1001 inpatient requests were identified for which body CT was not performed after an electronically generated request. Fifty-five requests were not accepted by the radiology department during the vetting process for a variety of reasons (often more than one): criteria used for rejection often overlapped and included referrals outside national guidelines (n = 20), better alternative investigations (n = 29), time constraints (n = 19), over-zealous requests (n = 17) and clinicians' erroneous interpretation of preceding imaging investigations (n = 9). Sixteen CT exams were cancelled by a clinician. An additional 12 exams were not performed for miscellaneous non-medical reasons. In no case could a patient's death be ascribed to CT not being performed. Most (981 of 1001, 98 %) CT requests comply with current guidelines, disproving a perception that many radiological referrals are inappropriate. In our health care system radiologists have to turn down some appropriate CT referrals due to a lack of CT capacity. Although lack of CT contributed to delay in diagnosis, no patient died as a direct result of not having CT. (orig.)

  12. Solar Training Network and Solar Ready Vets

    Energy Technology Data Exchange (ETDEWEB)

    Dalstrom, Tenley Ann

    2016-09-14

    In 2016, the White House announced the Solar Ready Vets program, funded under DOE's SunShot initiative would be administered by The Solar Foundation to connect transitioning military personnel to solar training and employment as they separate from service. This presentation is geared to informing and recruiting employer partners for the Solar Ready Vets program, and the Solar Training Network. It describes the programs, and the benefits to employers that choose to connect to the programs.

  13. Automatic Vetting for Malice in Android Platforms

    Science.gov (United States)

    2016-05-01

    Android Apps from Play Store Infected with Brain Test Malware. http://www.ibtimes.co.uk/google- removes -13- android -apps-play-store-infected- brain-test...AUTOMATIC VETTING FOR MALICE IN ANDROID PLATFORMS IOWA STATE UNIVERSITY MAY 2016 FINAL TECHNICAL REPORT APPROVED...COVERED (From - To) DEC 2013 - DEC 2015 4. TITLE AND SUBTITLE Automatic Vetting for Malice in Android Platforms 5a. CONTRACT NUMBER FA8750-14-2

  14. Freight performance measures : approach analysis.

    Science.gov (United States)

    2010-05-01

    This report reviews the existing state of the art and also the state of the practice of freight performance measurement. Most performance measures at the state level have aimed at evaluating highway or transit infrastructure performance with an empha...

  15. Winter maintenance performance measure.

    Science.gov (United States)

    2016-01-01

    The Winter Performance Index is a method of quantifying winter storm events and the DOTs response to them. : It is a valuable tool for evaluating the States maintenance practices, performing post-storm analysis, training : maintenance personnel...

  16. VET Applied Research: Driving VET's Role in the Innovation System

    Science.gov (United States)

    Beddie, Francesca M.; Simon, Linda

    2017-01-01

    Innovation has become an increasingly important concept for Australian businesses in enabling them to continue to compete in an international market, but where does vocational education and training (VET) sit in this? To date, VET has been largely overlooked by the National Innovation and Science Agenda as a potential contributor in this field.…

  17. Pedagogical quality of VET teachers and management in Denmark

    DEFF Research Database (Denmark)

    Gottlieb, Susanne

    2016-01-01

    This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article...... is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from...... the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider VET teacher education, research, and This article is written from the viewpoint of a provider...

  18. Performance Measurement Baseline Change Request

    Data.gov (United States)

    Social Security Administration — The Performance Measurement Baseline Change Request template is used to document changes to scope, cost, schedule, or operational performance metrics for SSA's Major...

  19. Transit performance measures in California.

    Science.gov (United States)

    2016-04-01

    This research is the result of a California Department of Transportation (Caltrans) request to assess the most commonly : available transit performance measures in California. Caltrans wanted to understand performance measures and data used by : Metr...

  20. Measuring the Company Performance

    Directory of Open Access Journals (Sweden)

    Ion Stancu

    2006-03-01

    Full Text Available According to the logics of the efficient capital investment, the management of the investment of the saving capital in the company’s assets must conclude, on the end of the financial year, with a plus ofreal value (NPV > 0. From this point of view, in this paper we suggest the usage of an investment valuationmodel for the assessment of the company managerial and technological performance. Supposing the book value is a proxy of the just value (of assets and operational results and supposing the capital cost iscorrectly estimated, we evaluate the company’s performance both by the net present value model, and also by the company’s ability to create a surplus of the invested capital (NPV >0.Our paper also aims to identify the performance of the financial breakeven point (for which NPV is at least equal to zero as the minimum acceptable level for the company’s activity. Under this critical sales point, the company goes through the undervaluation of shareholders fortune even if the company’s sales are greater than accounting breakeven point. The performance’s activity level is one which the managers recover and surpass the cost of capital, cost which stand for the normal activity benchmark.The risks of applying of our suggested model we support go down to the confidence of accounting data and of the cost of capital estimating. In spite all of this, the usage of a sensitivity analysis to search anaverage NPV would leads to the company’s performance valuation within investment logic with a high information power.

  1. Measuring the Company Performance

    Directory of Open Access Journals (Sweden)

    Ion Stancu

    2006-01-01

    Full Text Available According to the logics of the efficient capital investment, the management of the investment of the saving capital in the company’s assets must conclude, on the end of the financial year, with a plus of real value (NPV > 0. From this point of view, in this paper we suggest the usage of an investment valuation model for the assessment of the company managerial and technological performance. Supposing the book value is a proxy of the just value (of assets and operational results and supposing the capital cost is correctly estimated, we evaluate the company’s performance both by the net present value model, and also by the company’s ability to create a surplus of the invested capital (NPV >0. Our paper also aims to identify the performance of the financial breakeven point (for which NPV is at least equal to zero as the minimum acceptable level for the company’s activity. Under this critical sales point, the company goes through the undervaluation of shareholders fortune even if the company’s sales are greater than accounting breakeven point. The performance’s activity level is one which the managers recover and surpass the cost of capital, cost which stand for the normal activity benchmark. The risks of applying of our suggested model we support go down to the confidence of accounting data and of the cost of capital estimating. In spite all of this, the usage of a sensitivity analysis to search an average NPV would leads to the company’s performance valuation within investment logic with a high information power.

  2. Challenges for Nordic VET-systems

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    2015-01-01

    , this challenge is not new. It has been on the agenda since the late 1960s following the crisis for apprenticeship and the growing demand for equal access to all levels of education. What is new, however, is that the challenge has intensified and the solutions developed since the 1970s don’t appear tenable today......The systems of vocational education and training (VET) in the Nordic Countries all face a similar challenge: to offer double qualifications. The Nordic VET-systems are expected to give access not only to skilled employment, but also to higher education. As an increasing share of young people....... This situation calls for new solutions to tackle the challenge of double qualifications. The question, which I will examine in this chapter, is how the Nordic VET-systems have handled this challenge in different ways and what these systems can learn from Switzerland, which is often highlighted as a model...

  3. Economic measures of performance

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Cogeneration systems can reduce the total cost of utility service, and, in some instances where power is sold to an electric utility, can even produce a positive net revenue stream. This is, the total cogeneration revenue is greater than the cogeneration system's operating cost plus the cost of supplemental fuel and power. Whether it is sited at an existing facility or new construction, cogeneration systems do require an incremental investment over and above that which would be required if the end user were to utilize more conventional utility services. While the decision as to whether or not one should invest in cogeneration may consider such intangibles as predictability of future utility costs, reliability of electrical supply and the quality of that supply, the decision ultimately becomes one of basic economics. This chapter briefly reviews several economic measures with regard to ease of use, accuracy and financial objective

  4. THE MEASURABILITY OF CONTROLLING PERFORMANCE

    Directory of Open Access Journals (Sweden)

    V. Laval

    2017-04-01

    Full Text Available The urge to increase the performance of company processes is ongoing. Surveys indicate however, that many companies do not measure the controlling performance with a defined set of key performance indicators. This paper will analyze three categories of controlling key performance indicators based on their degree of measurability and their impact on the financial performance of a company. Potential measures to optimize the performance of the controlling department will be outlined and put in a logical order. The aligning of the controlling activity with the respective management expectation will be discussed as a key success factor of this improvement project.

  5. Competence-based VET as seen by Dutch researchers

    NARCIS (Netherlands)

    Wesselink, R.; Biemans, H.J.A.; Mulder, M.; Elsen, van den E.

    2007-01-01

    The concept of competence is increasingly the basis for (re)designing VET. In competence-based VET academic disciplines are no longer starting points for curriculum development. Competence needed for working in practice, however, is. Competence-based learning is a dominant trend in VET in several

  6. The Social Stratification of the German VET System

    Science.gov (United States)

    Protsch, Paula; Solga, Heike

    2016-01-01

    Germany is widely known for its vocational education and training (VET) system and its dual apprenticeship system in particular. What is often overlooked, however, is the vertical stratification within the German VET system. This is the focus of this study. Our analysis shows that the VET system, like the German school system, is highly…

  7. Measuring and improving infrastructure performance

    National Research Council Canada - National Science Library

    Committee on Measuring and Improving Infrastructure Performance, National Research Council

    .... Developing a framework for guiding attempts at measuring the performance of infrastructure systems and grappling with the concept of defining good performance are the major themes of this book...

  8. 77 FR 14707 - Vet Center Services

    Science.gov (United States)

    2012-03-13

    ... assessment, individual counseling, group counseling, marital and family counseling for military-related... includes but is not limited to: psychosocial assessment, individual counseling, group counseling, marital... counseling currently provided in VA's Vet Centers to certain veterans of the Armed Forces and members of...

  9. The Politics of Performance Measurement

    DEFF Research Database (Denmark)

    Bjørnholt, Bente; Larsen, Flemming

    2014-01-01

    Performance measurements are meant to improve public decision making and organizational performance. But performance measurements are far from always rational tools for problem solving, they are also political instruments. The central question addressed in this article is how performance...... impact on the political decision making process, as the focus on performance goals entails a kind of reductionism (complex problems are simplified), sequential decision making processes (with a division in separate policy issues) and short-sighted decisions (based on the need for making operational goals)....... measurement affects public policy. The aim is to conceptualize the political consequences of performance measurements and of special concern is how performance systems influence how political decisions are made, what kind of political decisions are conceivable, and how they are implemented. The literature...

  10. Renewing VET Provision: Understanding Feedback Mechanisms between Initial VET and the Labour Market. Research Paper No 37

    Science.gov (United States)

    Cedefop - European Centre for the Development of Vocational Training, 2013

    2013-01-01

    A strong VET system is increasingly seen as essential to overcoming the current economic crisis in Europe. VET is seen as a powerful tool to assist in balancing labour market inefficiencies, increasing youth employment possibilities, and reducing skills mismatch. Its inherent flexibility and closeness to the labour market place VET in a good…

  11. Diagnostic colonoscopy: performance measurement study.

    Science.gov (United States)

    Kuznets, Naomi

    2002-07-01

    This is the fifth of a series of best practices studies undertaken by the Performance Measurement Initiative (PMI), the centerpiece of the Institute for Quality Improvement (IQI), a not-for-profit quality improvement subsidiary of the Accreditation Association for Ambulatory Health Care (AAAHC) (Performance Measurement Initiative, 1999a, 1999b, 2000a, 2000b). The IQI was created to offer clinical performance measurement and improvement opportunities to ambulatory health care organizations and others interested in quality patient care. The purpose of the study was to provide opportunities to initiate clinical performance measurement on key processes and outcomes for this procedure and use this information for clinical quality improvement. This article provides performance measurement information on how organizations that have demonstrated and validated differences in clinical practice can have similar outcomes, but at a dramatically lower cost. The intent of the article is to provide organizations with alternatives in practice to provide a better value to their patients.

  12. Facilities projects performance measurement system

    International Nuclear Information System (INIS)

    Erben, J.F.

    1979-01-01

    The two DOE-owned facilities at Hanford, the Fuels and Materials Examination Facility (FMEF), and the Fusion Materials Irradiation Test Facility (FMIT), are described. The performance measurement systems used at these two facilities are next described

  13. Monitoring VET Systems of Major EU Competitor Countries - The Cases of Australia, Canada, U.S.A. and Japan

    OpenAIRE

    Ruth, Klaus

    2009-01-01

    The study on VET systems of major EU competitor countries is based on the objective of the (revised) Lisbon agenda to become the most competitive region of the world based on a knowledge driven production and social cohesion. Building on experts opinion and literature research this study aims at monitoring VET policies in Australia, Canada, the U.S. and Japan. The study analyses five themes which are assumed to be of outstanding importance for understanding the current performance and the dev...

  14. Performance Measures, Benchmarking and Value.

    Science.gov (United States)

    McGregor, Felicity

    This paper discusses performance measurement in university libraries, based on examples from the University of Wollongong (UoW) in Australia. The introduction highlights the integration of information literacy into the curriculum and the outcomes of a 1998 UoW student satisfaction survey. The first section considers performance indicators in…

  15. Vocabulary of Emotions Test (VET: A Cross-cultural Validation in Portuguese and Croatian Contexts

    Directory of Open Access Journals (Sweden)

    Ana Costa

    2011-12-01

    Full Text Available This article discusses the adaptation and cross-cultural validation of the Vocabulary of Emotions Test (VET in the Portuguese and Croatian contexts, an Emotional Intelligence ability measure with 35 items, which assesses individual's ability to understand emotion. Based on Mayer and Salovey's (1997 theoretical framework of emotional intelligence, VET was originally developed in Croatian academic settings by Takšić, Harambašić and Velemir (2003. This study involved 1119 secondary school students, 682 Portuguese and 437 Croatian, attending different grades and courses. Overall, in both Croatian (original version and Portuguese (adapted version contexts, VET evidenced good psychometric properties particularly concerning sensibility, difficulty item analysis and reliability, although slightly better indicators were found in the Croatian original version. Moreover, cultural and gender differences were found, benefiting Portuguese students and girls.

  16. The current state of the challenges for VET in Denmark

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    The aim of this report is to analyse the way the Danish VET system has been coping with four challenges in the last decades. First the report describes key features of the institutional architecture of the current Danish VET-system. In the next two sections priority is given to the challenges....... The report examines how the VET systems connects with the labour market and explores the patterns of transition of the students from VET to the labour market and describes indications of their mobility and employability. In the following section the report focusses on the second challenge for vocational...... the suc-cess of subsequent reforms of VET in improving the connections between VET and higher educa-tion, latest with the reform in 2013. The next challenge to be examined is that of social inclusion. This is mainly a question of raising the retention of students in the vocational programmes, where...

  17. What can be learned from the Nordic VET-systems?

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    school, no common model of upper secondary vocational education (VET) exist. Though these countries share the ideals of social inclusion and equal educational opportunities for all, they include two opposite models of VET. Sweden has realised the unified Gymnasium for all, comprising academic...... and vocational programmes that offer all students eligibility for higher education. Denmark has maintained a selective upper secondary school education and a VET-system based on the apprenticeship model. Finland and Norway represent mixed systems that combine elements from these system. By comparing VET...... and for the training companies. However, the Nordic VET-systems offer examples of reforms and innovations that try to overcome these trade-offs. One type of reforms include initiatives to improve the linkages from VET to the labour market. Of special interest are the new intermediary institutions between education...

  18. Performance of biometric quality measures.

    Science.gov (United States)

    Grother, Patrick; Tabassi, Elham

    2007-04-01

    We document methods for the quantitative evaluation of systems that produce a scalar summary of a biometric sample's quality. We are motivated by a need to test claims that quality measures are predictive of matching performance. We regard a quality measurement algorithm as a black box that converts an input sample to an output scalar. We evaluate it by quantifying the association between those values and observed matching results. We advance detection error trade-off and error versus reject characteristics as metrics for the comparative evaluation of sample quality measurement algorithms. We proceed this with a definition of sample quality, a description of the operational use of quality measures. We emphasize the performance goal by including a procedure for annotating the samples of a reference corpus with quality values derived from empirical recognition scores.

  19. Walk like a vet, think like an owner.

    Science.gov (United States)

    2016-11-26

    Owners consulting the internet before venturing into a veterinary practice is a real issue in today's technological age, but how often do vets step into the owner's shoes and try to understand why they do so? On the farm, what are the motivations of the farmer, and are these being listened to by the vet? These were just some of the questions raised in a session at the BVA Congress during the London Vet Show last week. Georgina Mills reports. British Veterinary Association.

  20. Contrasting Prospects: The Institutionalisation of VET for Retail and Office Work in Norway

    Science.gov (United States)

    Reegård, Kaja

    2017-01-01

    This article calls attention to the difficulty of institutionalising vocational education and training (VET) in the service sector in Norway, despite the growing importance of this sector for national economic performance. Drawing on interviews with apprentices, employers, stakeholders, representatives of trade unions and employer organisations,…

  1. Scalable Performance Measurement and Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Gamblin, Todd [Univ. of North Carolina, Chapel Hill, NC (United States)

    2009-01-01

    Concurrency levels in large-scale, distributed-memory supercomputers are rising exponentially. Modern machines may contain 100,000 or more microprocessor cores, and the largest of these, IBM's Blue Gene/L, contains over 200,000 cores. Future systems are expected to support millions of concurrent tasks. In this dissertation, we focus on efficient techniques for measuring and analyzing the performance of applications running on very large parallel machines. Tuning the performance of large-scale applications can be a subtle and time-consuming task because application developers must measure and interpret data from many independent processes. While the volume of the raw data scales linearly with the number of tasks in the running system, the number of tasks is growing exponentially, and data for even small systems quickly becomes unmanageable. Transporting performance data from so many processes over a network can perturb application performance and make measurements inaccurate, and storing such data would require a prohibitive amount of space. Moreover, even if it were stored, analyzing the data would be extremely time-consuming. In this dissertation, we present novel methods for reducing performance data volume. The first draws on multi-scale wavelet techniques from signal processing to compress systemwide, time-varying load-balance data. The second uses statistical sampling to select a small subset of running processes to generate low-volume traces. A third approach combines sampling and wavelet compression to stratify performance data adaptively at run-time and to reduce further the cost of sampled tracing. We have integrated these approaches into Libra, a toolset for scalable load-balance analysis. We present Libra and show how it can be used to analyze data from large scientific applications scalably.

  2. Measuring performance at trade shows

    DEFF Research Database (Denmark)

    Hansen, Kåre

    2004-01-01

    Trade shows is an increasingly important marketing activity to many companies, but current measures of trade show performance do not adequately capture dimensions important to exhibitors. Based on the marketing literature's outcome and behavior-based control system taxonomy, a model is built...... that captures a outcome-based sales dimension and four behavior-based dimensions (i.e. information-gathering, relationship building, image building, and motivation activities). A 16-item instrument is developed for assessing exhibitors perceptions of their trade show performance. The paper presents evidence...

  3. Performance Measurement of Research Activitities

    DEFF Research Database (Denmark)

    Jakobsen, Morten; Jensen, Tina Blegind; Peyton, Margit Malmmose

    Performance measurements have made their entry into the world of universities. Every research activity is registered in a database and the output measures form the foundation for managerial decisions. The purpose of this chapter is to investigate the registration practices among researchers...... the registrations as a way to be promoted and to legitimise and account for their work; on the other hand, the economic incentives behind ranking lists and bibliographic research indicators threaten the individual researcher's freedom. The findings also show how managers have difficulties in translating back...

  4. From performance measurement to learning

    DEFF Research Database (Denmark)

    Lewis, Jenny; Triantafillou, Peter

    2012-01-01

    Over the last few decades accountability has accommodated an increasing number of different political, legal and administrative goals. This article focuses on the administrative aspect of accountability and explores the potential perils of a shift from performance measurement to learning. While...... overload. We conclude with some comments on limiting the undesirable consequences of such a move. Points for practitioners Public administrators need to identify and weigh the (human, political and economic) benefits and costs of accountability regimes. While output-focused performance measurement regimes...... to comply with accountability requirements, because of the first point. Third, the costs of compliance are likely to increase because learning requires more participation and dialogue. Fourth, accountability as learning may generate a ‘change for the sake of change’ mentality, creating further government...

  5. Information Collection on the Situation of VET Teachers and Trainers in Candidate Countries

    OpenAIRE

    Foundation VET reform in Estonia / Estonian National Observatory

    2002-01-01

    Currently there are two main categories of teachers in VET schools – VET teachers and teachers of general education subjects. The former status of two different kinds of VET teachers – the professional subject teacher, and the training master has been replaced by one VET teacher category by the Regulation No 18 of the Minister of Culture and Education the Statute of a VET Teacher/Trainer of 26 May 1995.VET teachers have to carry out workshop training and teach professional subj...

  6. Online Support for VET Clients: Expectations and Experiences.

    Science.gov (United States)

    Choy, Sarojni; McNickle, Cathy; Clayton, Berwyn

    Since little research existed about services for online learners in Australia, a national study was conducted to explore the expectations and experiences of online learners in the Vocational Education and Training (VET) sector. Online learners enrolled with various Registered Training Organizations (RTOs) from the VET sector were contacted for…

  7. VET Manager Identities: Culture, Philosophy and Professional Practice

    Science.gov (United States)

    Foley, Annette

    2011-01-01

    Using a post-structural approach this article investigates the working lives of frontline managers in VET and how they negotiate change in their day to day practices and decision making. The article is organised around accounts made by managers from different types of Vocational Education and Training (VET) organisations, namely: Technical and…

  8. 76 FR 50715 - Briefing on Partner Vetting System Pilot Program

    Science.gov (United States)

    2011-08-16

    ... Development Briefing on Partner Vetting System Pilot Program AGENCY: U.S. Department of State and U.S. Agency... briefing on the Partner Vetting System (PVS) pilot program. The objective of the briefing is to provide information about the PVS pilot program. Members of the public may attend in person or join via teleconference...

  9. VET Teachers in Europe: Policies, Practices and Challenges

    Science.gov (United States)

    Misra, Pradeep Kumar

    2011-01-01

    The objective of making vocational education and training (VET) globally competitive and attractive by the European Union has put vocational teachers in the spotlight. As a result, the VET teacher profession in Europe is facing many challenges and demands expressed constantly by the general public, representatives from the world of work, public…

  10. Quality Assurance of Vet Delivery to Quality Professionals

    Directory of Open Access Journals (Sweden)

    Liviu Moldovan

    2013-06-01

    Full Text Available The purpose of the paper is to presents some results of the project entitled “Transfer of innovative training solutions for VET of quality professionals” (acronym TIT-us financed by European Commission. It addresses to the need of designing new VET courses for training in quality management qualifications. Our approach for quality design of VET courses is to add the methodological step to the classic PDCA Deming cycle. We have shown that each activity in VET is a quality approach which consists of a number of decisions made within the five steps: plan, do, check, act and a certain methodology. The findings are demonstrated for each step, in actions the VET provider has to follow for an effective methodological process.

  11. Opcode counting for performance measurement

    Energy Technology Data Exchange (ETDEWEB)

    Gara, Alan; Satterfield, David L.; Walkup, Robert E.

    2018-03-20

    Methods, systems and computer program products are disclosed for measuring a performance of a program running on a processing unit of a processing system. In one embodiment, the method comprises informing a logic unit of each instruction in the program that is executed by the processing unit, assigning a weight to each instruction, assigning the instructions to a plurality of groups, and analyzing the plurality of groups to measure one or more metrics. In one embodiment, each instruction includes an operating code portion, and the assigning includes assigning the instructions to the groups based on the operating code portions of the instructions. In an embodiment, each type of instruction is assigned to a respective one of the plurality of groups. These groups may be combined into a plurality of sets of the groups.

  12. Performance measurement and pay for performance

    NARCIS (Netherlands)

    Tuijl, van H.F.J.M.; Kleingeld, P.A.M.; Algera, J.A.; Rutten, M.L.; Sonnentag, S.

    2002-01-01

    This chapter, which takes a (re)design perspective, focuses on the management of employees’ contributions to organisational goal attainment. The control loop for the self-regulation of task performance is used as a frame of reference. Several subsets of design requirements are described and related

  13. What is the future of work based learning in VET?

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    not to pursue an academic career. Countries with strong apprenticeship systems tend to have less youth unemployment and a smoother transition to the labour market than others. Furthermore, from a learning perspective, the outcomes of work-based training and informal learning are enhanced when they are combined...... that question the future role and organisation of work-based training in VET. The purpose of this paper is to examine these challenges based on a review of research on European VET systems and analyses of the Danish dual system of VET. In the end of the paper, some innovative solutions to these challenges...

  14. Performance measurement for information systems: Industry perspectives

    Science.gov (United States)

    Bishop, Peter C.; Yoes, Cissy; Hamilton, Kay

    1992-01-01

    Performance measurement has become a focal topic for information systems (IS) organizations. Historically, IS performance measures have dealt with the efficiency of the data processing function. Today, the function of most IS organizations goes beyond simple data processing. To understand how IS organizations have developed meaningful performance measures that reflect their objectives and activities, industry perspectives on IS performance measurement was studied. The objectives of the study were to understand the state of the practice in IS performance techniques for IS performance measurement; to gather approaches and measures of actual performance measures used in industry; and to report patterns, trends, and lessons learned about performance measurement to NASA/JSC. Examples of how some of the most forward looking companies are shaping their IS processes through measurement is provided. Thoughts on the presence of a life-cycle to performance measures development and a suggested taxonomy for performance measurements are included in the appendices.

  15. 45 CFR 305.2 - Performance measures.

    Science.gov (United States)

    2010-10-01

    ... PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.2 Performance measures. (a) The child support incentive system measures State performance levels in five program areas... 45 Public Welfare 2 2010-10-01 2010-10-01 false Performance measures. 305.2 Section 305.2 Public...

  16. Specialized Binary Analysis for Vetting Android APPS Using GUI Logic

    Science.gov (United States)

    2016-04-01

    user expectation of what the app is doing. These techniques enable security analysts to quickly vet any given Android app even if the source code is...Malware Detection for Android applications, Binary Analysis 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT SAR 18. NUMBER OF PAGES 19a...of what the app is doing. These techniques enable security analysts to quickly vet any given Android app even if the source code is unavailable. These

  17. Brush seal performance measurement system

    OpenAIRE

    Aksoy, Serdar; Akşit, Mahmut Faruk; Aksit, Mahmut Faruk; Duran, Ertuğrul Tolga; Duran, Ertugrul Tolga

    2009-01-01

    Brush seals are rapidly replacing conventional labyrinth seals in turbomachinery applications. Upon pressure application, seal stiffness increases drastically due to frictional bristle interlocking. Operating stiffness is critical to determine seal wear life. Typically, seal stiffness is measured by pressing a curved shoe to brush bore. The static-unpressurized measurement is extrapolated to pressurized and high speed operating conditions. This work presents a seal stiffness measurement syste...

  18. Education - employment partnership for VET in the fashion sector

    Science.gov (United States)

    Ursache, M.; Avădanei, M. L.; Ionesi, D. S.; Loghin, E.

    2017-10-01

    The paper presents the objectives, the innovative aspects, the planned outputs and the current results of the project entitled “Education - Employment Partnership for VET in the fashion sector”. The project is co-financed by the European Commission under the Erasmus+ Programme, Key Action 2 - Strategic Partnerships in the Field of Education, Training, Youth and Sport. The project aims mainly the at developing a European teaching and training Toolkit for supporting the implementation of Work-Based Learning (WBL) in all stages of vocational education and training (VET) in the fashion sector. Moreover, the project will support the implementation of quality assurance mechanisms for WBL in VET in the fashion sector with a specific focus on feedback loops between iVET and cVET systems. The project consortium is composed by nine partners from four countries (Romania, Bulgaria, Italy and Netherlands) representing two iVET providers, a university a Chamber of Commerce, a Federation of SMEs connected with fashion industries, one research institution, one company in clothing and fashion sector, two consulting companies with experience in education and training policies. The actual research results presented in the paper are based on the survey oriented to the training needs and the impact and benefits of WBL implementation. The data were collected from educational organizations. Also, examples of good practices showing the different challenges and benefits of WBL implementation, were identified.

  19. Mobility and reliability performance measurement.

    Science.gov (United States)

    2013-06-01

    This project grew out of the fact that mobility was identified early on as one of the key performance focus areas of NCDOTs : strategic transformation effort. The Transformation Management Team (TMT) established a TMT Mobility Workstream Team : in...

  20. A taxonomy for teaching transfer skills in the Danish VET system

    DEFF Research Database (Denmark)

    Aarkrog, Vibe

    2011-01-01

    The educational system is grounded in the belief that you can teach people in one setting — the school — in order that they will be able to perform in other settings outside school. The vital process of applying knowledge and skills acquired in an educational situation to working life is known......’; in other words, their ability to apply knowledge and skills to a broad range of situations. To adapt to frequent changes in the labour market, students need to develop general competences that will enable them to move to other jobs and other companies. Therefore the pedagogy of VET should provide...... to the transfer process solely within the specialised vocational and education and training (VET) stream in Denmark. The existence of many identical elements in both training and transfer situations is known as ‘near transfer’, and is most readily achieved when training is conducted within company premises...

  1. Traffic Management Systems Performance Measurement: Final Report

    OpenAIRE

    Banks, James H.; Kelly, Gregory

    1997-01-01

    This report documents a study of performance measurement for Transportation Management Centers (TMCs). Performance measurement requirements were analyzed, data collection and management techniques were investigated, and case study traffic data system improvement plans were prepared for two Caltrans districts.

  2. Performance measurement and insurance liabilities

    NARCIS (Netherlands)

    Plantinga, A; Huijgen, C

    2001-01-01

    In this article, the authors develop an attribution framework for evaluating the investment performance of institutional investors such as insurance companies. The model is useful in identifying the investment skills of insurance companies. This is accomplished by developing a dual benchmark for the

  3. Eva versus Other Performance Measures

    OpenAIRE

    Hechmi Soumaya

    2013-01-01

    Create value not only intended to satisfy shareholders. This is also the way to ensure the ability of the company to ensure its sustainability and finance its growth. The company will not attract new capital if it destroys value. "The concept of value creation is none other than the intersection of strategy (create value) and technique (evaluate the company)"(Powilewicz, 2002). The basic idea behind the different measures of value creation by a company is that a company creates value for its ...

  4. Internet Performance and Reliability Measurements

    International Nuclear Information System (INIS)

    Cottrell, Les

    2003-01-01

    Collaborative HEP research is dependent on good Internet connectivity. Although most local- and wide-area networks are carefully watched, there is little monitoring of connections that cross many networks. This paper describes work in progress at several sites to monitor Internet end-to-end performance between hundreds of HEP sites worldwide. At each collection site, ICMP ping packets are automatically sent periodically to sites of interest. The data is recorded and made available to analysis nodes, which collect the data from multiple collection sites and provide analysis and graphing. Future work includes improving the efficiency and accuracy of ping data collection

  5. PRINCIPLES OF THE SUPPLY CHAIN PERFORMANCE MEASUREMENT

    OpenAIRE

    BEATA ŒLUSARCZYK; SEBASTIAN KOT

    2012-01-01

    Measurement of performance in every business management is a crucial activity allowing for effectiveness increase. The lack of suitable performance measurement is especially noticed in complex systems as supply chains. Responsible persons cannot manage effectively without suitable set of measures those are base for comparison to previous data or effects of other supply chain functioning. The analysis shows that it is very hard to find balanced set of supply chain performance measures those sh...

  6. Performance Measurement in Global Product Development

    DEFF Research Database (Denmark)

    Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

    2013-01-01

    there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

  7. Health Plan Performance Measurement within Medicare Subvention.

    Science.gov (United States)

    1998-06-01

    the causes of poor performance (Siren & Laffel, 1996). Although outcomes measures such as nosocomial infection rates, admission rates for select...defined. Traditional outcomes measures include infection rates, morbidity, and mortality. The problem with these traditional measures is... Maternal /Child Care Indicators Nursing Staffing Indicators Outcome Indicators Technical Outcomes Plan Performance Stability of Health Plan

  8. Measuring Distribution Performance? Benchmarking Warrants Your Attention

    Energy Technology Data Exchange (ETDEWEB)

    Ericson, Sean J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Alvarez, Paul [The Wired Group

    2018-04-13

    Identifying, designing, and measuring performance metrics is critical to securing customer value, but can be a difficult task. This article examines the use of benchmarks based on publicly available performance data to set challenging, yet fair, metrics and targets.

  9. Synthesis of work-zone performance measures.

    Science.gov (United States)

    2013-09-01

    The main objective of this synthesis was to identify and summarize how agencies collect, analyze, and report different work-zone : traffic-performance measures, which include exposure, mobility, and safety measures. The researchers also examined comm...

  10. VET and the creative epistemology of the hand

    DEFF Research Database (Denmark)

    Tanggaard, Lene

    , and to collaborate across the value chains in our organisations. This developing situation should attract the attention of those involved in VET. This keynote presentation will link crafts, vocational education and training and creativity which have a lot in common. In this, the pragmatist idea of an epistemology...... with practical action. We should count something as knowledge only if it enables us to make a fruitful difference to human experience. This links with an understanding of creative actions as those actions that make an impact in and on the world. A practical implication of this would be that VET must teach its...

  11. Measuring the performance of business incubators

    OpenAIRE

    VANDERSTRAETEN, Johanna; MATTHYSSENS, Paul; VAN WITTELOOSTUIJN, Arjen

    2012-01-01

    This paper focuses on incubator performance measurement. First, we report the findings of an extensive literature review. Both existing individual measures and more comprehensive measurement systems are discussed. This literature review shows that most incubator researchers and practitioners only use one or a few indicators for performance evaluation, and that existing measurement systems do not recognize the importance of short, medium and long-term results, do not always include an incubato...

  12. The service of public services performance measurement

    DEFF Research Database (Denmark)

    Lystbæk, Christian Tang

    2014-01-01

    that performance measurement serves as “rituals of verification” which promotes the interests of political masters and their mistresses rather than public service. Another area of concern is the cost of performance measurement. Hood & Peters (2004:278) note that performance measurement is likely to “distract...... measurement suggests a range of contested and contradictory propositions. Its alleged benefits include public assurance, better functioning of supply markets for public services, and direct improvements of public services. But the literature also demonstrates the existence of significant concern about...... the actual impact, the costs and unintended consequences associated with performance measurement. This paper identifies the main rationales and rationalities in the scholarly discourse on public services performance measurement. It concludes with some suggestions on how to deal with the many rationales...

  13. VET workers problem-solving skills in technology-rich environments: European approach

    OpenAIRE

    Hämäläinen, Raija

    2014-01-01

    The European workplace is challenging VET adults problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults skills to date. The present study (N=50 369) focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults problem-solving sk...

  14. VET workers’ problem-solving skills in technology-rich environments: European approach

    OpenAIRE

    Hämäläinen, Raija; Cincinnato, Sebastiano; Malin, Antero; De Wever, Bram

    2014-01-01

    The European workplace is challenging VET adults’ problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults’ skills to date. The present study (N=50 369) focuses on gaining insight into the problem-solving skills in TREs of adults with a VET background. When examining the similarities and differences in VET adults’ problem-solving...

  15. COMPANY PERFORMANCE MEASUREMENT AND REPORTING METHODS

    Directory of Open Access Journals (Sweden)

    Nicu Ioana Elena

    2012-12-01

    Full Text Available One of the priorities of economic research has been and remains the re-evaluation of the notion of performance and especially exploring and finding some indicators that would reflect as accurately as possible the subtleties of the economic entity. The main purpose of this paper is to highlight the main company performance measurement and reporting methods. Performance is a concept that raises many question marks concerning the most accurate or the best method of reporting the performance at the company level. The research methodology has aimed at studying the Romanian and foreign specialized literature dealing with the analyzed field, studying magazines specialized on company performance measurement. If the financial performance measurement indicators are considered to offer an accurate image of the situation of the company, the modern approach through non-financial indicators offers a new perspective upon performance measurement, which is based on simplicity. In conclusion, after the theoretical study, I have noticed that the methods of performance measurement, reporting and interpretation are various, the opinions regarding the best performance measurement methods are contradictive and the companies prefer resorting to financial indicators that still play a more important role in the consolidation of the company performance measurement than the non-financial indicators do.

  16. From VET School to the Labour Market in Bosnia and Herzegovina: Expected versus Actual Wages

    Science.gov (United States)

    Brankovic, Nina; Oruc, Nermin

    2016-01-01

    This article analyses the differences between expected and actual wages of VET students and graduates. It uses a survey of VET students enrolled in schools in Bosnia and Herzegovina, and data about employed VET graduates from the Labour Force Survey. The model of determinants of wages, expected or actual, estimated separately on each dataset,…

  17. A Preliminary Analysis of the Outcomes of Students Assisted by VET FEE-HELP: Summary

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2015

    2015-01-01

    This summary highlights the key findings from the report "A preliminary analysis of the outcomes of students assisted by VET FEE-HELP". VET FEE-HELP is an income-contingent loan scheme that assists eligible students undertaking certain vocational education training (VET) courses with an approved provider by paying for all or part of…

  18. Continuing Professional Development for a Diverse VET Practitioner Workforce. Occasional Paper

    Science.gov (United States)

    Tyler, Mark; Dymock, Darryl

    2017-01-01

    This occasional paper provides a stocktake of recent developments in continuing professional development for VET practitioners. It explores issues such as industry currency, the debate around a professional association for VET and the Certificate IV in Training and Assessment as the minimum qualification for VET practitioners. Through synthesising…

  19. A Critique of Health System Performance Measurement.

    Science.gov (United States)

    Lynch, Thomas

    2015-01-01

    Health system performance measurement is a ubiquitous phenomenon. Many authors have identified multiple methodological and substantive problems with performance measurement practices. Despite the validity of these criticisms and their cross-national character, the practice of health system performance measurement persists. Theodore Marmor suggests that performance measurement invokes an "incantatory response" wrapped within "linguistic muddle." In this article, I expand upon Marmor's insights using Pierre Bourdieu's theoretical framework to suggest that, far from an aberration, the "linguistic muddle" identified by Marmor is an indicator of a broad struggle about the representation and classification of public health services as a public good. I present a case study of performance measurement from Alberta, Canada, examining how this representational struggle occurs and what the stakes are. © The Author(s) 2015.

  20. Does hospital financial performance measure up?

    Science.gov (United States)

    Cleverley, W O; Harvey, R K

    1992-05-01

    Comparisons are continuously being made between the financial performance, products and services, of the healthcare industry and those of non-healthcare industries. Several useful measures of financial performance--profitability, liquidity, financial risk, asset management and replacement, and debt capacity, are used by the authors to compare the financial performance of the hospital industry with that of the industrial, transportation and utility sectors. Hospitals exhibit weaknesses in several areas. Goals are suggested for each measure to bring hospitals closer to competitive levels.

  1. On music performance, theories, measurement en diversity

    NARCIS (Netherlands)

    Timmers, R.; Honing, H.J.

    2002-01-01

    Measurement of musical performances is of interest to studies in musicology, music psychology and music performance practice, but in general it has not been considered the main issue: when analyzing Western classical music, these disciplines usually focus on the score rather than the performance.

  2. Quantifying Stakeholder Values of VET Provision in the Netherlands

    Science.gov (United States)

    van der Sluis, Margriet E.; Reezigt, Gerry J.; Borghans, Lex

    2014-01-01

    It is well-known that the quality of vocational education and training (VET) depends on how well a given programme aligns with the values and interests of its stakeholders, but it is less well-known what these values and interests are and to what extent they are shared across different groups of stakeholders. We use vignettes to quantify the…

  3. Regulating and Quality-Assuring VET: International Developments. Research Report

    Science.gov (United States)

    Misko, Josie

    2015-01-01

    The opening-up of the market for education and training, including vocational education and training (VET), has increased the importance of regulation and quality assurance mechanisms in ensuring the integrity of qualifications. This report investigates approaches to the regulation and quality assurance of vocational education and training in a…

  4. Improvement of educational quality in VET: Who is next?

    NARCIS (Netherlands)

    Venne, L. van de; Honingh, M.E.; Genugten, M.L. van; Bruijn, E. de; Billett, S.; Onstenk, J.

    2017-01-01

    Educational quality is a recurrent theme in the Dutch Vocational and Educational Training (VET) sector. Given the major transformations in school governance and the increased autonomy of schools and school boards, it is important to address whether schools and school boards are able to improve

  5. Moral Learning for the Workplace: A Role for VET

    Science.gov (United States)

    James, Ian

    2012-01-01

    The paper explores ways that vocational education and training (VET) might become involved in the development of moral "know-how", ready for workplace practice. The primary concern here is the transformation of earlier-learnt ethical principles to their applied moral behaviour, essential for appropriate practice within workplace…

  6. Home and abroad: vets' role in dealing with rabies.

    Science.gov (United States)

    Herrera, Manuela

    2014-11-29

    Manuela Herrera reports on a session at the BVA Congress which discussed the contributions that vets can make to tackling rabies, and how the profession can be at the forefront of a One Health approach to saving the lives of animals and people. British Veterinary Association.

  7. Development of a Behavioral Performance Measure

    Directory of Open Access Journals (Sweden)

    Marcelo Cabus Klotzle

    2012-09-01

    Full Text Available Since the fifties, several measures have been developed in order to measure the performance of investments or choices involving uncertain outcomes. Much of these measures are based on Expected Utility Theory, but since the nineties a number of measures have been proposed based on Non-Expected Utility Theory. Among the Theories of Non-Expected Utility highlights Prospect Theory, which is the foundation of Behavioral Finance. Based on this theory this study proposes a new performance measure in which are embedded loss aversion along with the likelihood of distortions in the choice of alternatives. A hypothetical example is presented in which various performance measures, including the new measure are compared. The results showed that the ordering of the assets varied depending on the performance measure adopted. According to what was expected, the new performance measure clearly has captured the distortion of probabilities and loss aversion of the decision maker, ie, those assets with the greatest negative deviations from the target were those who had the worst performance.

  8. Performance measures for a dialysis setting.

    Science.gov (United States)

    Gu, Xiuzhu; Itoh, Kenji

    2018-03-01

    This study from Japan extracted performance measures for dialysis unit management and investigated their characteristics from professional views. Two surveys were conducted using self-administered questionnaires, in which dialysis managers/staff were asked to rate the usefulness of 44 performance indicators. A total of 255 managers and 2,097 staff responded. Eight performance measures were elicited from dialysis manager and staff responses: these were safety, operational efficiency, quality of working life, financial effectiveness, employee development, mortality, patient/employee satisfaction and patient-centred health care. These performance measures were almost compatible with those extracted in overall healthcare settings in a previous study. Internal reliability, content and construct validity of the performance measures for the dialysis setting were ensured to some extent. As a general trend, both dialysis managers and staff perceived performance measures as highly useful, especially for safety, mortality, operational efficiency and patient/employee satisfaction, but showed relatively low concerns for patient-centred health care and employee development. However, dialysis managers' usefulness perceptions were significantly higher than staff. Important guidelines for designing a holistic hospital/clinic management system were yielded. Performance measures must be balanced for outcomes and performance shaping factors (PSF); a common set of performance measures could be applied to all the healthcare settings, although performance indicators of each measure should be composed based on the application field and setting; in addition, sound causal relationships between PSF and outcome measures/indicators should be explored for further improvement. © 2017 European Dialysis and Transplant Nurses Association/European Renal Care Association.

  9. MEASUREMENT: ACCOUNTING FOR RELIABILITY IN PERFORMANCE ESTIMATES.

    Science.gov (United States)

    Waterman, Brian; Sutter, Robert; Burroughs, Thomas; Dunagan, W Claiborne

    2014-01-01

    When evaluating physician performance measures, physician leaders are faced with the quandary of determining whether departures from expected physician performance measurements represent a true signal or random error. This uncertainty impedes the physician leader's ability and confidence to take appropriate performance improvement actions based on physician performance measurements. Incorporating reliability adjustment into physician performance measurement is a valuable way of reducing the impact of random error in the measurements, such as those caused by small sample sizes. Consequently, the physician executive has more confidence that the results represent true performance and is positioned to make better physician performance improvement decisions. Applying reliability adjustment to physician-level performance data is relatively new. As others have noted previously, it's important to keep in mind that reliability adjustment adds significant complexity to the production, interpretation and utilization of results. Furthermore, the methods explored in this case study only scratch the surface of the range of available Bayesian methods that can be used for reliability adjustment; further study is needed to test and compare these methods in practice and to examine important extensions for handling specialty-specific concerns (e.g., average case volumes, which have been shown to be important in cardiac surgery outcomes). Moreover, it's important to note that the provider group average as a basis for shrinkage is one of several possible choices that could be employed in practice and deserves further exploration in future research. With these caveats, our results demonstrate that incorporating reliability adjustment into physician performance measurements is feasible and can notably reduce the incidence of "real" signals relative to what one would expect to see using more traditional approaches. A physician leader who is interested in catalyzing performance improvement

  10. Towards integrating environmental performance in divisional performance measurement

    Directory of Open Access Journals (Sweden)

    Collins C Ngwakwe

    2014-08-01

    Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

  11. Introduction to control system performance measurements

    CERN Document Server

    Garner, K C

    1968-01-01

    Introduction to Control System Performance Measurements presents the methods of dynamic measurements, specifically as they apply to control system and component testing. This book provides an introduction to the concepts of statistical measurement methods.Organized into nine chapters, this book begins with an overview of the applications of automatic control systems that pervade almost every area of activity ranging from servomechanisms to electrical power distribution networks. This text then discusses the common measurement transducer functions. Other chapters consider the basic wave

  12. Internal Performance Measurement Systems: Problems and Solutions

    DEFF Research Database (Denmark)

    Jakobsen, Morten; Mitchell, Falconer; Nørreklit, Hanne

    2010-01-01

    This article pursues two aims: to identify problems and dangers related to the operational use of internal performance measurement systems of the Balanced Scorecard (BSC) type and to provide some guidance on how performance measurement systems may be designed to overcome these problems....... The analysis uses and extends N rreklit's (2000) critique of the BSC by applying the concepts developed therein to contemporary research on the BSC and to the development of practice in performance measurement. The analysis is of relevance for many companies in the Asia-Pacific area as an increasing numbers...

  13. Measurement uncertainty analysis techniques applied to PV performance measurements

    International Nuclear Information System (INIS)

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results

  14. Telerobotic system performance measurement - Motivation and methods

    Science.gov (United States)

    Kondraske, George V.; Khoury, George J.

    1992-01-01

    A systems performance-based strategy for modeling and conducting experiments relevant to the design and performance characterization of telerobotic systems is described. A developmental testbed consisting of a distributed telerobotics network and initial efforts to implement the strategy described is presented. Consideration is given to the general systems performance theory (GSPT) to tackle human performance problems as a basis for: measurement of overall telerobotic system (TRS) performance; task decomposition; development of a generic TRS model; and the characterization of performance of subsystems comprising the generic model. GSPT employs a resource construct to model performance and resource economic principles to govern the interface of systems to tasks. It provides a comprehensive modeling/measurement strategy applicable to complex systems including both human and artificial components. Application is presented within the framework of a distributed telerobotics network as a testbed. Insight into the design of test protocols which elicit application-independent data is described.

  15. Performance measurement in transport sector analysis

    Directory of Open Access Journals (Sweden)

    M. Išoraitė

    2004-06-01

    Full Text Available The article analyses the following issues: 1. Performance measurement in literature. The performance measurement has an important role to play in the efficient and effective management of organizations. Kaplan and Johnson highlighted the failure of the financial measures to reflect changes in the competitive circumstances and strategies of modern organizations. Many authors have focused attention on how organizations can design more appropriate measurement systems. Based on literature, consultancy experience and action research, numerous processes have been developed that organizations can follow in order to design and implement systems. Many frameworks have been proposed that support these processes. The objective of such frameworks is to help organizations define a set of measures that reflect their objectives and assess their performance appropriately. 2. Transport sector performance and its impacts measuring. The purpose of transport measurement is to identify opportunities enhancing transport performance. Successful transport sector management requires a system to analyze its efficiency and effectiveness as well as plan interventions if transport sector performance needs improvement. Transport impacts must be measurable and monitorable so that the person responsible for the project intervention can decide when and how to influence them. Performance indicators provide a means to measure and monitor impacts. These indicators essentially reflect quantitative and qualitative aspects of impacts at given time and places. 3. Transport sector output and input. Transport sector inputs are the resources required to deliver transport sector outputs. Transport sector inputs are typically: human resources, particularly skilled resources (including specialists consulting inputs; technology processes such as equipment and work; and finance, both public and private. 4. Transport sector policy and institutional framework; 5. Cause – effect linkages; 6

  16. Road weather management performance measures : 2012 update.

    Science.gov (United States)

    2013-08-01

    In 2007, the Road Weather Management Program (RWMP) conducted a study with stakeholders from the transportation and meteorological communities to define eleven performance measures that would enable the Federal Highway Administration (FHWA) to determ...

  17. Performance measures for metropolitan planning organizations.

    Science.gov (United States)

    2012-04-01

    Performance measurement is a topic of increasing importance to transportation agencies, as issues with : funding shortfalls and concerns about transportation system efficiency lead to a shift in how transportation : decision making is carried out. In...

  18. Smart city performance measurement framework. CITYkeys

    NARCIS (Netherlands)

    Airaksinen, M.; Seppa, I.P.; Huovilla, A.; Neumann, H.M.; Iglar, B.; Bosch, P.R.

    2017-01-01

    This paper presents a holistic performance measurement framework for harmonized and transparent monitoring and comparability of the European cities activities during the implementation of Smart City solutions. The work methodology was based on extensive collaboration and communication with European

  19. Work zone performance measures pilot test.

    Science.gov (United States)

    2011-04-01

    Currently, a well-defined and validated set of metrics to use in monitoring work zone performance do not : exist. This pilot test was conducted to assist state DOTs in identifying what work zone performance : measures can and should be targeted, what...

  20. ASUPT Automated Objective Performance Measurement System.

    Science.gov (United States)

    Waag, Wayne L.; And Others

    To realize its full research potential, a need exists for the development of an automated objective pilot performance evaluation system for use in the Advanced Simulation in Undergraduate Pilot Training (ASUPT) facility. The present report documents the approach taken for the development of performance measures and also presents data collected…

  1. Environmental Measurements Laboratory 2002 Unit Performance Plan

    Energy Technology Data Exchange (ETDEWEB)

    None

    2001-10-01

    This EML Unit Performance Plan provides the key goals and performance measures for FY 2002 and continuing to FY 2003. The purpose of the Plan is to inform EML's stakeholders and customers of the Laboratory's products and services, and its accomplishments and future challenges. Also incorporated in the Unit Performance Plan is EML's Communication Plan for FY 2002.

  2. Measuring performance in virtual reality phacoemulsification surgery

    Science.gov (United States)

    Söderberg, Per; Laurell, Carl-Gustaf; Simawi, Wamidh; Skarman, Eva; Nordh, Leif; Nordqvist, Per

    2008-02-01

    We have developed a virtual reality (VR) simulator for phacoemulsification surgery. The current work aimed at developing a relative performance index that characterizes the performance of an individual trainee. We recorded measurements of 28 response variables during three iterated surgical sessions in 9 experienced cataract surgeons, separately for the sculpting phase and the evacuation phase of phacoemulsification surgery and compared their outcome to that of a reference group of naive trainees. We defined an individual overall performance index, an individual class specific performance index and an individual variable specific performance index. We found that on an average the experienced surgeons performed at a lower level than a reference group of naive trainees but that this was particularly attributed to a few surgeons. When their overall performance index was further analyzed as class specific performance index and variable specific performance index it was found that the low level performance was attributed to a behavior that is acceptable for an experienced surgeon but not for a naive trainee. It was concluded that relative performance indices should use a reference group that corresponds to the measured individual since the definition of optimal surgery may vary among trainee groups depending on their level of experience.

  3. APPROXIMATIONS TO PERFORMANCE MEASURES IN QUEUING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Kambo, N. S.

    2012-11-01

    Full Text Available Approximations to various performance measures in queuing systems have received considerable attention because these measures have wide applicability. In this paper we propose two methods to approximate the queuing characteristics of a GI/M/1 system. The first method is non-parametric in nature, using only the first three moments of the arrival distribution. The second method treads the known path of approximating the arrival distribution by a mixture of two exponential distributions by matching the first three moments. Numerical examples and optimal analysis of performance measures of GI/M/1 queues are provided to illustrate the efficacy of the methods, and are compared with benchmark approximations.

  4. Reconsidering the measurement of ancillary service performance.

    Science.gov (United States)

    Griffin, D T; Rauscher, J A

    1987-08-01

    Prospective payment reimbursement systems have forced hospitals to review their costs more carefully. The result of the increased emphasis on costs is that many hospitals use costs, rather than margin, to judge the performance of ancillary services. However, arbitrary selection of performance measures for ancillary services can result in managerial decisions contrary to hospital objectives. Managerial accounting systems provide models which assist in the development of performance measures for ancillary services. Selection of appropriate performance measures provides managers with the incentive to pursue goals congruent with those of the hospital overall. This article reviews the design and implementation of managerial accounting systems, and considers the impact of prospective payment systems and proposed changes in capital reimbursement on this process.

  5. Measurement Of Shariah Stock Performance Using Risk Adjusted Performance

    Directory of Open Access Journals (Sweden)

    Zuhairan Y Yunan

    2015-03-01

    Full Text Available The aim of this research is to analyze the shariah stock performance using risk adjusted performance method. There are three parameters to measure the stock performance i.e. Sharpe, Treynor, and Jensen. This performance’s measurements calculate the return and risk factor from shariah stocks. The data that used on this research is using the data of stocks at Jakarta Islamic Index. Sampling method that used on this paper is purposive sampling. This research is using ten companies as a sample. The result shows that from three parameters, the stock that have a best performance are AALI, ANTM, ASII, CPIN, INDF, KLBF, LSIP, and UNTR.DOI: 10.15408/aiq.v7i1.1364

  6. Developing Human Performance Measures (PSAM8)

    International Nuclear Information System (INIS)

    Jeffrey C. Joe

    2006-01-01

    Through the reactor oversight process (ROP), the U.S. Nuclear Regulatory Commission (NRC) monitors the performance of utilities licensed to operate nuclear power plants. The process is designed to assure public health and safety by providing reasonable assurance that licensees are meeting the cornerstones of safety and designated crosscutting elements. The reactor inspection program, together with performance indicators (PIs), and enforcement activities form the basis for the NRC's risk-informed, performance based regulatory framework. While human performance is a key component in the safe operation of nuclear power plants and is a designated cross-cutting element of the ROP, there is currently no direct inspection or performance indicator for assessing human performance. Rather, when human performance is identified as a substantive cross cutting element in any 1 of 3 categories (resources, organizational or personnel), it is then evaluated for common themes to determine if follow-up actions are warranted. However, variability in human performance occurs from day to day, across activities that vary in complexity, and workgroups, contributing to the uncertainty in the outcomes of performance. While some variability in human performance may be random, much of the variability may be attributed to factors that are not currently assessed. There is a need to identify and assess aspects of human performance that relate to plant safety and to develop measures that can be used to successfully assure licensee performance and indicate when additional investigation may be required. This paper presents research that establishes a technical basis for developing human performance measures. In particular, we discuss: (1) how historical data already gives some indication of connection between human performance and overall plant performance, (2) how industry led efforts to measure and model human performance and organizational factors could serve as a data source and basis for a

  7. Measurement uncertainty analysis techniques applied to PV performance measurements

    Energy Technology Data Exchange (ETDEWEB)

    Wells, C.

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment's final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  8. Measurement uncertainty analysis techniques applied to PV performance measurements

    Energy Technology Data Exchange (ETDEWEB)

    Wells, C

    1992-10-01

    The purpose of this presentation is to provide a brief introduction to measurement uncertainty analysis, outline how it is done, and illustrate uncertainty analysis with examples drawn from the PV field, with particular emphasis toward its use in PV performance measurements. The uncertainty information we know and state concerning a PV performance measurement or a module test result determines, to a significant extent, the value and quality of that result. What is measurement uncertainty analysis? It is an outgrowth of what has commonly been called error analysis. But uncertainty analysis, a more recent development, gives greater insight into measurement processes and tests, experiments, or calibration results. Uncertainty analysis gives us an estimate of the I interval about a measured value or an experiment`s final result within which we believe the true value of that quantity will lie. Why should we take the time to perform an uncertainty analysis? A rigorous measurement uncertainty analysis: Increases the credibility and value of research results; allows comparisons of results from different labs; helps improve experiment design and identifies where changes are needed to achieve stated objectives (through use of the pre-test analysis); plays a significant role in validating measurements and experimental results, and in demonstrating (through the post-test analysis) that valid data have been acquired; reduces the risk of making erroneous decisions; demonstrates quality assurance and quality control measures have been accomplished; define Valid Data as data having known and documented paths of: Origin, including theory; measurements; traceability to measurement standards; computations; uncertainty analysis of results.

  9. Dropout in VET – institutional selection and social exclusion

    DEFF Research Database (Denmark)

    Jørgensen, Christian Helms

    Dropout – institutional selection and social exclusion For the last ten years dropout of vocational education has increased strongly in Denmark. The questions addressed in this paper are why and how dropout in VET takes place. The objective is to provide more detailed and qualified knowledge...... of the complex processes of dropping out. The present study is part of a large national research project on retention in VET. The paper aims to understand dropout as a result of the interplay of students’ agentic actions and social interactions and the opportunities for participation afforded by the colleges...... area, sub-cultural style, etc. It is shown how the students, through the interplay of institutional selection and social in- and exclusion, pass through different trajectories of participation in the programmes....

  10. The Coherence of Vocational Education and Training in Norway and Spain: National Traditions and the Reshaping of VET Governance in Hybrid VET Systems

    Science.gov (United States)

    Souto-Otero, Manuel; Ure, Odd Bjorn

    2012-01-01

    Coherence of national education and training systems is increasingly tabled in European policy debates. Leaning on literature about the emergence and consolidation of national education systems, this article explores the rationale for VET reforms in Norway and Spain by scrutinising attempts to strengthen the coherence of their VET systems.…

  11. Ambulatory care registered nurse performance measurement.

    Science.gov (United States)

    Swan, Beth Ann; Haas, Sheila A; Chow, Marilyn

    2010-01-01

    On March 1-2, 2010, a state-of-the-science invitational conference titled "Ambulatory Care Registered Nurse Performance Measurement" was held to focus on measuring quality at the RN provider level in ambulatory care. The conference was devoted to ambulatory care RN performance measurement and quality of health care. The specific emphasis was on formulating a research agenda and developing a strategy to study the testable components of the RN role related to care coordination and care transitions, improving patient outcomes, decreasing health care costs, and promoting sustainable system change. The objectives were achieved through presentations and discussion among expert inter-professional participants from nursing, public health, managed care, research, practice, and policy. Conference speakers identified priority areas for a unified practice, policy, and research agenda. Crucial elements of the strategic dialogue focused on issues and implications for nursing and inter-professional practice, quality, and pay-for-performance.

  12. Baseline Establishment Using Virtual Environment Traumatic Brain Injury Screen (VETS)

    Science.gov (United States)

    2015-06-01

    attempting to determine the presence of a mTBI. The use of VETS has potential to be a feasible test in a austere de - ployed environment. This thesis aims...Observe for 5-10 seconds: - Does the service member stumble or shift feet? 8. Balance Tandem Romberg Test NEUROLOGICAL EXAM RESULTS All Normal...individuals participated in two sessions, separated by a week, where they were tested under six conditions for three trials each. Balance data were recorded by

  13. Procedure to Measure Indoor Lighting Energy Performance

    Energy Technology Data Exchange (ETDEWEB)

    Deru, M.; Blair, N.; Torcellini, P.

    2005-10-01

    This document provides standard definitions of performance metrics and methods to determine them for the energy performance of building interior lighting systems. It can be used for existing buildings and for proposed buildings. The primary users for whom these documents are intended are building energy analysts and technicians who design, install, and operate data acquisition systems, and who analyze and report building energy performance data. Typical results from the use of this procedure are the monthly and annual energy used for lighting, energy savings from occupancy or daylighting controls, and the percent of the total building energy use that is used by the lighting system. The document is not specifically intended for retrofit applications. However, it does complement Measurement and Verification protocols that do not provide detailed performance metrics or measurement procedures.

  14. Performance measures for transform data coding.

    Science.gov (United States)

    Pearl, J.; Andrews, H. C.; Pratt, W. K.

    1972-01-01

    This paper develops performance criteria for evaluating transform data coding schemes under computational constraints. Computational constraints that conform with the proposed basis-restricted model give rise to suboptimal coding efficiency characterized by a rate-distortion relation R(D) similar in form to the theoretical rate-distortion function. Numerical examples of this performance measure are presented for Fourier, Walsh, Haar, and Karhunen-Loeve transforms.

  15. Corporate Social Performance: From Output Measurement to Impact Measurement

    NARCIS (Netherlands)

    K.E.H. Maas (Karen)

    2009-01-01

    textabstractAll organisations have social, environmental and economic impacts that effect people, their communities and the natural environment. Impacts include intended as well as unintended effects and negative as well as positive effects. Current practice in performance measurement tends to focus

  16. Application of data mining in performance measures

    Science.gov (United States)

    Chan, Michael F. S.; Chung, Walter W.; Wong, Tai Sun

    2001-10-01

    This paper proposes a structured framework for exploiting data mining application for performance measures. The context is set in an airline company is illustrated for the use of such framework. The framework takes in consideration of how a knowledge worker interacts with performance information at the enterprise level to support them to make informed decision in managing the effectiveness of operations. A case study of applying data mining technology for performance data in an airline company is illustrated. The use of performance measures is specifically applied to assist in the aircraft delay management process. The increasingly dispersed and complex operations of airline operation put much strain on the part of knowledge worker in using search, acquiring and analyzing information to manage performance. One major problem faced with knowledge workers is the identification of root causes of performance deficiency. The large amount of factors involved in the analyze the root causes can be time consuming and the objective of applying data mining technology is to reduce the time and resources needed for such process. The increasing market competition for better performance management in various industries gives rises to need of the intelligent use of data. Because of this, the framework proposed here is very much generalizable to industries such as manufacturing. It could assist knowledge workers who are constantly looking for ways to improve operation effectiveness through new initiatives and the effort is required to be quickly done to gain competitive advantage in the marketplace.

  17. Frequency Control Performance Measurement and Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Illian, Howard F.

    2010-12-20

    Frequency control is an essential requirement of reliable electric power system operations. Determination of frequency control depends on frequency measurement and the practices based on these measurements that dictate acceptable frequency management. This report chronicles the evolution of these measurements and practices. As technology progresses from analog to digital for calculation, communication, and control, the technical basis for frequency control measurement and practices to determine acceptable performance continues to improve. Before the introduction of digital computing, practices were determined largely by prior experience. In anticipation of mandatory reliability rules, practices evolved from a focus primarily on commercial and equity issues to an increased focus on reliability. This evolution is expected to continue and place increased requirements for more precise measurements and a stronger scientific basis for future frequency management practices in support of reliability.

  18. CITYkeys Smart city performance measurement system

    NARCIS (Netherlands)

    Huovila, A.; Airaksinen, M.; Pinto-Seppa, I.; Piira, K.; Bosch, P.R.; Penttinen, T.; Neumann, H.M.; Kontinakis, N.

    2017-01-01

    Cities are tackling their economic, social and environmental challenges through smart city solutions. To demonstrate that these solutions achieve the desired impact, an indicator-based assessment system is needed. This paper presents the process of developing CITYkeys performance measurement system

  19. The Validity of Subjective Performance Measures

    DEFF Research Database (Denmark)

    Meier, Kenneth J.; Winter, Søren C.; O'Toole, Laurence J.

    2015-01-01

    to provide, and are highly policy specific rendering generalization difficult. But are perceptual performance measures valid, and do they generate unbiased findings? We examine these questions in a comparative study of middle managers in schools in Texas and Denmark. The findings are remarkably similar...

  20. Performance Measurement in Helicopter Training and Operations.

    Science.gov (United States)

    Prophet, Wallace W.

    For almost 15 years, HumRRO Division No. 6 has conducted an active research program on techniques for measuring the flight performance of helicopter trainees and pilots. This program addressed both the elemental aspects of flying (i.e., maneuvers) and the mission- or goal-oriented aspects. A variety of approaches has been investigated, with the…

  1. Testing for Distortions in Performance Measures

    DEFF Research Database (Denmark)

    Sloof, Randolph; Van Praag, Mirjam

    2015-01-01

    Distorted performance measures in compensation contracts elicit suboptimal behavioral responses that may even prove to be dysfunctional (gaming). This paper applies the empirical test developed by Courty and Marschke (Review of Economics and Statistics, 90, 428-441) to detect whether the widely...

  2. Testing for Distortions in Performance Measures

    DEFF Research Database (Denmark)

    Sloof, Randolph; Van Praag, Mirjam

    Distorted performance measures in compensation contracts elicit suboptimal behavioral responses that may even prove to be dysfunctional (gaming). This paper applies the empirical test developed by Courty and Marschke (2008) to detect whether the widely used class of Residual Income based performa...

  3. Performance measurement in industrial R&D

    NARCIS (Netherlands)

    Kerssens-van Drongelen, I.C.; Nixon, Bill; Pearson, Alan

    2000-01-01

    Currently, the need for R&D performance measurements that are both practically useful and theoretically sound seems to be generally acknowledged; indeed, the rising cost of R&D, greater emphasis on value management and a trend towards decentralization are escalating the need for ways of evaluating

  4. External Innovation Implementation Determinants and Performance Measurement

    DEFF Research Database (Denmark)

    Coates, Matthew; Bals, Lydia

    2013-01-01

    for innovation implementation based on a case study in the pharmaceutical industry. The results of 25 expert interviews and a survey with 67 respondents led to the resulting framework and a corresponding performance measurement system. The results reveal the importance of supporting systems and show differences...

  5. 20 CFR 638.302 - Performance measurement.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Performance measurement. 638.302 Section 638.302 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM UNDER TITLE IV-B OF THE JOB TRAINING PARTNERSHIP ACT Funding, Site Selection, and Facilities Management...

  6. Tools for Measuring and Improving Performance.

    Science.gov (United States)

    Jurow, Susan

    1993-01-01

    Explains the need for meaningful performance measures in libraries and the Total Quality Management (TQM) approach to data collection. Five tools representing different stages of a TQM inquiry are covered (i.e., the Shewhart Cycle, flowcharts, cause-and-effect diagrams, Pareto charts, and control charts), and benchmarking is addressed. (Contains…

  7. Performance measures for world class maintenance

    International Nuclear Information System (INIS)

    Labib, A.W.

    1998-01-01

    A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a 'real time' environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs

  8. Performance measures for world class maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Labib, A.W. [Department of Mechanical Engineering, University of Manchester, Institute of Science and Technology, Manchester (United Kingdom)

    1998-12-31

    A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a `real time` environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs.

  9. Performance measures for world class maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Labib, A W [Department of Mechanical Engineering, University of Manchester, Institute of Science and Technology, Manchester (United Kingdom)

    1999-12-31

    A main problem in maintenance in general, and in power plants and related equipment in particular, is the lack of a practical, consistent, and adaptive performance measure that provides a focused feedback and integrates preventive and corrective modes of maintenance. The presentation defines concepts of world class and benchmarking. Desirable features in an appropriate performance measure are identified. It then, demonstrates current practices in maintenance and criticises their shortcomings. An alternative model is presented through a case study. The model monitors performance from a general view, and then offers a focused analysis. The main conclusion is that the proposed model offers an adaptive and a dynamic framework, and hence production and maintenance are integrated in a `real time` environment. The system is also flexible in working with any other criteria whether they are of a quantitative or a qualitative nature. (orig.) 16 refs.

  10. Improvement an enterprises marketing performance measurement system

    Directory of Open Access Journals (Sweden)

    Stanković Ljiljana

    2013-01-01

    Full Text Available Business conditions in which modern enterprises do business are more and more complex. The complexity of the business environment is caused by activities of external and internal factors, which imposes the need for the turn in management focus. One of key turns is related to the need of adaptation and development of new business performance evaluation systems. The evaluation of marketing contribution to business performance is very important however a complex task as well. The marketing theory and practice indicates the need for developing adequate standards and systems for evaluating the efficiency of marketing decisions. The better understanding of marketing standards and ways that managers use is a very important factor that affects the efficiency of strategic decision-making. The paper presents the results of researching the way in which managers perceive and apply marketing performance measures. The data that were received through the field research sample enabled the consideration of the managers' attitudes on practical ways of implementing marketing performance measurement and identifying measures that managers imply as used mostly in business practice.

  11. Total performance measurement and management: TPM2

    Energy Technology Data Exchange (ETDEWEB)

    Sheather, G. [University of Technology, Sydney, NSW (Australia)

    1996-10-01

    As the rate of incremental improvement activities and business process re-engineering programs increase, product development times reduce, collaborative endeavours between OEMs and out-sourcing suppliers increase, as agile manufacturing responds to the demands of a global marketplace, the `virtual` organisation is becoming a reality. In this context, customers, partners, suppliers and manufacturers are increasingly separated by field geography, time zone, and availability, but linked by distributed information systems. Measuring and monitoring business performance in this environment requires a entirely different framework and set of key performance indicators (KPIs) usually associated with traditional financial accounting approaches. These approaches are critiqued, then the paper introduces a new concept `Total Performance Measurement Management` (TPM2), to distinguish it from the conventional TPM (Total Productive Management). A model for combining both financial and non-financial KPIs relevant to real-time performance measures stretching across strategic, business unit and operational levels, is presented. The results of the model confirm the hypothesis that it is feasible to develop a TPM2 framework for achieving enterprise wide strategic objectives. (author). 6 tabs., 18 figs., refs.

  12. Performance expectations of measurement control programs

    International Nuclear Information System (INIS)

    Hammond, G.A.

    1985-01-01

    The principal index for designing and assessing the effectiveness of safeguards is the sensitivity and reliability of gauging the true status of material balances involving material flows, transfers, inventories, and process holdup. The measurement system must not only be capable of characterizing the material for gradation or intensity of protection, but also be responsive to needs for detection and localization of losses, provide confirmation that no diversion has occurred, and help meet requirements for process control, health and safety. Consequently, the judicious application of a measurement control and quality assurance program is vital to a complete understanding of the capabilities and limitations of the measurement system including systematic and random components of error for weight, volume, sampling, chemical, isotopic, and nondestructive determinations of material quantities in each material balance area. This paper describes performance expectations or criteria for a measurement control program in terms of ''what'' is desired and ''why'', relative to safeguards and security objectives

  13. The role of VET Colleges in stimulating teachers’ engagement in team learning

    OpenAIRE

    Bouwmans, Machiel

    2018-01-01

    The necessity of VET teachers’ engagement in team learning Secondary vocational education and training, here abbreviated as VET, has a central position in the Dutch education system. It is the second largest education sector and qualifies large numbers of students for many professions. To ensure the smooth transition of students to the labour market, VET colleges have implemented competence-based education (CBE) programmes, which are designed to develop relevant professional competencies. VE...

  14. Coming up short on nonfinancial performance measurement.

    Science.gov (United States)

    Ittner, Christopher D; Larcker, David F

    2003-11-01

    Companies in increasing numbers are measuring customer loyalty, employee satisfaction, and other nonfinancial areas of performance that they believe affect profitability. But they've failed to relate these measures to their strategic goals or establish a connection between activities undertaken and financial outcomes achieved. Failure to make such connections has led many companies to misdirect their investments and reward ineffective managers. Extensive field research now shows that businesses make some common mistakes when choosing, analyzing, and acting on their nonfinancial measures. Among these mistakes: They set the wrong performance targets because they focus too much on short-term financial results, and they use metrics that lack strong statistical validity and reliability. As a result, the companies can't demonstrate that improvements in nonfinancial measures actually affect their financial results. The authors lay out a series of steps that will allow companies to realize the genuine promise of nonfinancial performance measures. First, develop a model that proposes a causal relationship between the chosen nonfinancial drivers of strategic success and specific outcomes. Next, take careful inventory of all the data within your company. Then use established statistical methods for validating the assumed relationships and continue to test the model as market conditions evolve. Finally, base action plans on analysis of your findings, and determine whether those plans and their investments actually produce the desired results. Nonfinancial measures will offer little guidance unless you use a process for choosing and analyzing them that relies on sophisticated quantitative and qualitative inquiries into the factors actually contributing to economic results.

  15. Approaches towards airport economic performance measurement

    Directory of Open Access Journals (Sweden)

    Ivana STRYČEKOVÁ

    2011-01-01

    Full Text Available The paper aims to assess how economic benchmarking is being used by airports as a means of performance measurement and comparison of major international airports in the world. The study focuses on current benchmarking practices and methods by taking into account different factors according to which it is efficient to benchmark airports performance. As methods are considered mainly data envelopment analysis and stochastic frontier analysis. Apart from them other approaches are discussed by airports to provide economic benchmarking. The main objective of this article is to evaluate the efficiency of the airports and answer some undetermined questions involving economic benchmarking of the airports.

  16. MODERN INSTRUMENTS FOR MEASURING ORGANIZATIONAL PERFORMANCE

    Directory of Open Access Journals (Sweden)

    RADU CATALINA

    2010-12-01

    Full Text Available Any significant management action can be assessed both in terms of success of immediate goals and as effect of the organization ability to embrace change. Market competition intensifies with the development of Romanian society and its needs. Companies that offer different products and services need to impose certain advantages and to increase their performances. The paper will present modern tools for measuring and evaluating organizational performance, namely: Balanced Scorecard, Deming model and Baldrige model. We also present an example for Balance Scorecard, of an organizations belonging to the cosmetics industry.

  17. Strategic Performance Measurement of Research and Development

    DEFF Research Database (Denmark)

    Parisi, Cristiana; Rossi, Paola

    2015-01-01

    The paper used an in depth case study to investigate how firms can integrate the strategic performance measurement of R&D with the Balanced Scorecard. Moreover, the paper investigated the crucial role of controller in the decision making process of this integration.The literature review of R......-financial ratio as the R&D measures to introduce in the Balanced Scorecard.In choosing our case study, we have selected the pharmaceutical industry because of its relevant R&D investment. Within the sector we chose the Italian affiliate of a traditional industry leader, Eli Lilly Italia,that was characterized...

  18. Efficacy study of Styplon Vet Bolus as supportive therapy in management of hemorrhagic conditions of ruminants

    Directory of Open Access Journals (Sweden)

    B R Ravikumar

    Full Text Available On-field trial was conducted in dairy animals to evaluate efficacy of Styplon Vet Bolus (M/s Himalaya Drug Company, Banglore, India as supportive therapy in management of hemorrhagic conditions (Hematuria, hemoagalectia, bleeding wounds, uterine bleeding and epistaxis of ruminants. Styplon Vet 1-2 boli twice daily was administered to cows and buffaloes, and ½ bolus twice daily for sheep till they recover clinically. The results indicated that Styplon Vet Bolus is a safe and effective styptic in ruminants. [Vet World 2009; 2(12.000: 470-471

  19. QUALITY ASSURANCE COURSES IN VET (VOCATIONAL EDUCATION AND TRAINING FOR TOURISM ORGANISED BY THE CENTRE FOR TOURISM TRAINING

    Directory of Open Access Journals (Sweden)

    SILVIA IRIMIEA

    2015-10-01

    Full Text Available Quality Assurance Courses in VET (Vocational Education and Training for Tourism Organised by the Centre for Tourism Training. The article seeks to give utterance to the findings of the pilot course on quality assurance designed and organised by the Centre for Tourism Training (CTT as part of the AQUA.TS European Lifelong Learning project. The CTT has become involved in research and exchange of experience in the field of quality assurance driven by the educational policy-related background set out by the European documents and tools, including EQARF, EQAVET, the principles of lifelong learning and adult education. The main theoretic background to the present paper was assured by the European Commission documents regarding quality assurance in VET, while the experience and good practices acquired by the CTT have profoundly marked its quality assurance–oriented policy. Against this background, The Centre for Tourism Training (CTT of the Faculty of Geography, University Babes-Bolyai, Romania, delivered a pilot training course on Quality Assurance in VET during 16 March and 10 April 2015. The training consisted of a theoretical knowledge-building module (16.03. 2015 – 27.03. 2015 and a practical module (30.03.2015 -10.04.2015, the latter focused on the use of the AQUA.TS TOOLKIT, an IT device aimed at the self-evaluation of the quality of performance of trainers and training providers, whose efficiency was tested during the organised training program.

  20. Key indicators for organizational performance measurement

    Directory of Open Access Journals (Sweden)

    Firoozeh Haddadi

    2014-09-01

    Full Text Available Each organization for assessing the amount of utility and desirability of their activities, especially in complex and dynamic environments, requires determining and ranking the vital performance indicators. Indicators provide essential links among strategy, execution and ultimate value creation. The aim of this paper is to develop a framework, which identifies and prioritizes Key Performance Indicators (KPIs that a company should focus on them to define and measure progress towards organizational objectives. For this purpose, an applied research was conducted in 2013 in an Iranian telecommunication company. We first determined the objectives of the company with respect to four perspectives of BSC (Balanced Scorecard framework. Next, performance indicators were listed and paired wise comparisons were accomplished by company's high-ranked employees through standard Analytic Hierarchy Process (AHP questionnaires. This helped us establish the weight of each indicator and to rank them, accordingly.

  1. Measurement-based reliability/performability models

    Science.gov (United States)

    Hsueh, Mei-Chen

    1987-01-01

    Measurement-based models based on real error-data collected on a multiprocessor system are described. Model development from the raw error-data to the estimation of cumulative reward is also described. A workload/reliability model is developed based on low-level error and resource usage data collected on an IBM 3081 system during its normal operation in order to evaluate the resource usage/error/recovery process in a large mainframe system. Thus, both normal and erroneous behavior of the system are modeled. The results provide an understanding of the different types of errors and recovery processes. The measured data show that the holding times in key operational and error states are not simple exponentials and that a semi-Markov process is necessary to model the system behavior. A sensitivity analysis is performed to investigate the significance of using a semi-Markov process, as opposed to a Markov process, to model the measured system.

  2. Team performance measures for abnormal plant operations

    International Nuclear Information System (INIS)

    Montgomery, J.C.; Seaver, D.A.; Holmes, C.W.; Gaddy, C.D.; Toquam, J.L.

    1990-01-01

    In order to work effectively, control room crews need to possess well-developed team skills. Extensive research supports the notion that improved quality and effectiveness are possible when a group works together, rather than as individuals. The Nuclear Regulatory Commission (NRC) has recognized the role of team performance in plant safety and has attempted to evaluate licensee performance as part of audits, inspections, and reviews. However, reliable and valid criteria for team performance have not yet been adequately developed. The purpose of the present research was to develop such reliable and valid measures of team skills. Seven dimensions of team skill performance were developed on the basis of input from NRC operator licensing examiners and from the results of previous research and experience in the area. These dimensions included two-way communications, resource management, inquiry, advocacy, conflict resolution/decision-making, stress management, and team spirit. Several different types of rating formats were developed for use with these dimensions, including a modified Behaviorally Anchored Rating Scale (BARS) format and a Behavioral Frequency format. Following pilot-testing and revision, observer and control room crew ratings of team performance were obtained using 14 control room crews responding to simulator scenarios at a BWR and a PWR reactor. It is concluded, overall, that the Behavioral Frequency ratings appeared quite promising as a measure of team skills but that additional statistical analyses and other follow-up research are needed to refine several of the team skills dimensions and to make the scales fully functional in an applied setting

  3. LBNL report of the vetting review of the GRETINA project

    International Nuclear Information System (INIS)

    Robinson, K.E.; Bercovitz, J.H.; Bieser, F.S.; Jared, R.C.; Karpenko, V.P.; Klein, S.R.; Lesko, K.T.; Rasson, J.E.; Ritter, H.G.; Tull, C.E.; Wells, R.; Wieman, H.H.

    2004-01-01

    GRETINA is a gamma-ray detector array capable of reconstructing the energy and spatial positions of gamma-ray interactions within the germanium crystals. It will be used to study the structure and stability of nuclei under various conditions. The new capabilities provided by gamma-ray tracking will give large gains in sensitivity for a large number of experiments, particularly those aimed at nuclei far from beta stability. A proposal for GRETINA was submitted to DOE in June 2003. It presented the scientific case, the readiness of technical development, the design, the suggested management organizations, and a proposed cost and schedule. The GRETINA proposal received its CD0 approval in August 2003. The CD-1 review will be held on December 3 and 4, 2003, and will be handled by the DOE-N. This report presents the charge to the GRETINA vetting review committee, and the findings, comments and recommendations of this committee. The purpose of this project vetting review was to assure that the GRETINA project is on track to provide DOE and the nuclear physics community with the agreed upon deliverables within the agreed upon budget and schedule. The vetting review committee was asked to cover both technical and management aspects of the GRETINA Project. Reviewers offer expert knowledge in relevant areas and provide recommendations and findings to the project's management team. Upon successful completion, the Laboratory's Integrated Project Management Office (IPMO) will recommend signoff of the project to the Laboratory Directorate. The GRETINA vetting review committee was asked to consider all relevant aspects of the project's management, project execution plan (PEP), technical approach and status, cost estimate, resources, schedule and risk and, in doing so, to advise as to whether the GRETINA Project was likely to successfully provide the agreed upon deliverables within the agreed upon budget and schedule. The review committee was asked to identify any project areas

  4. Performance measurement with fuzzy data envelopment analysis

    CERN Document Server

    Tavana, Madjid

    2014-01-01

    The intensity of global competition and ever-increasing economic uncertainties has led organizations to search for more efficient and effective ways to manage their business operations.  Data envelopment analysis (DEA) has been widely used as a conceptually simple yet powerful tool for evaluating organizational productivity and performance. Fuzzy DEA (FDEA) is a promising extension of the conventional DEA proposed for dealing with imprecise and ambiguous data in performance measurement problems. This book is the first volume in the literature to present the state-of-the-art developments and applications of FDEA. It is designed for students, educators, researchers, consultants and practicing managers in business, industry, and government with a basic understanding of the DEA and fuzzy logic concepts.

  5. IASI instrument: technical description and measured performances

    Science.gov (United States)

    Hébert, Ph.; Blumstein, D.; Buil, C.; Carlier, T.; Chalon, G.; Astruc, P.; Clauss, A.; Siméoni, D.; Tournier, B.

    2017-11-01

    IASI is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The IASI system includes 3 instruments that will be mounted on the Metop satellite series, a data processing software integrated in the EPS (EUMETSAT Polar System) ground segment and a technical expertise centre implemented in CNES Toulouse. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The optical configuration is based on a Michelson interferometer and the interferograms are processed by an on-board digital processing subsystem, which performs the inverse Fourier transforms and the radiometric calibration. The infrared imager co-registers the IASI soundings with AVHRR imager (AVHRR is another instrument on the Metop satellite). The presentation will focus on the architectures of the instrument, the description of the implemented technologies and the measured performance of the first flight model. CNES is leading the IASI program in association with EUMETSAT. The instrument Prime is ALCATEL SPACE.

  6. Measuring the performance of maintenance service outsourcing.

    Science.gov (United States)

    Cruz, Antonio Miguel; Rincon, Adriana Maria Rios; Haugan, Gregory L

    2013-01-01

    The aims of this paper are (1) to identify the characteristics of maintenance service providers that directly impact maintenance service quality, using 18 independent covariables; (2) to quantify the change in risk these covariables present to service quality, measured in terms of equipment turnaround time (TAT). A survey was applied to every maintenance service provider (n = 19) for characterization purposes. The equipment inventory was characterized, and the TAT variable recorded and monitored for every work order of each service provider (N = 1,025). Finally, the research team conducted a statistical analysis to accomplish the research objectives. The results of this study offer strong empirical evidence that the most influential variables affecting the quality of maintenance service performance are the following: type of maintenance, availability of spare parts in the country, user training, technological complexity of the equipment, distance between the company and the hospital, and the number of maintenance visits performed by the company. The strength of the results obtained by the Cox model built are supported by the measure of the Rp,e(2) = 0.57 with a value of Rp,e= 0.75. Thus, the model explained 57% of the variation in equipment TAT, with moderate high positive correlation between the dependent variable (TAT) and independent variables.

  7. A Preliminary Analysis of the Outcomes of Students Assisted by VET FEE-HELP

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2015

    2015-01-01

    VET FEE-HELP is an income-contingent loan scheme that assists eligible students undertaking certain vocational education and training (VET) courses (diploma, advanced diploma, graduate certificate and graduate diploma) with an approved provider by paying for all or part of their tuition costs. The tuition costs are paid directly to the provider.…

  8. Supporting teachers and trainers for successful reforms and quality of VET

    DEFF Research Database (Denmark)

    Kruse, Katrine; Gottlieb, Susanne; Andersen, Ole Dibbern

    This article presents how teachers and trainers in the Danish vocational education and training (VET) system are prepared for their work as professionals in an educational system undergoing rapid changes.......This article presents how teachers and trainers in the Danish vocational education and training (VET) system are prepared for their work as professionals in an educational system undergoing rapid changes....

  9. The role of VET Colleges in stimulating teachers’ engagement in team learning

    NARCIS (Netherlands)

    Bouwmans, Machiel

    2018-01-01

    The necessity of VET teachers’ engagement in team learning

    Secondary vocational education and training, here abbreviated as VET, has a central position in the Dutch education system. It is the second largest education sector and qualifies large numbers of students for

  10. The Contribution of VET Student Placement to Innovation in Host Organisations. NCVER Research Report

    Science.gov (United States)

    Hodge, Steven; Smith, Raymond; Field, Jenny; Flynn, Matthew

    2017-01-01

    With innovation seen as critical to Australia's economy, it is worthwhile to ask about the contribution of the Australian vocational education and training (VET) system to innovation. Previous research has highlighted a number of ways VET can contribute to innovation, including through knowledge diffusion, skills development and networks, and…

  11. Virtual Voices with Real-Life Consequences: Teaching Students about Cyber-Vetting

    Science.gov (United States)

    Hanasono, Lisa Kiyomi

    2013-01-01

    Despite its pervasiveness, many students do not realize how online communication can impact their careers and relationships. Cyber-vetting occurs when people use online search engines, social networking sites, and other Internet tools to uncover information about others. Because cyber-vetting is a relatively new concept, most communication…

  12. VET Workers' Problem-Solving Skills in Technology-Rich Environments: European Approach

    Science.gov (United States)

    Hämäläinen, Raija; Cincinnato, Sebastiano; Malin, Antero; De Wever, Bram

    2014-01-01

    The European workplace is challenging VET adults' problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults' skills to date. The present study (N = 50 369) focuses on gaining insight…

  13. Data Linkage in VET Research: Opportunities, Challenges and Principles. Discussion Paper

    Science.gov (United States)

    Osborne, Kristen; Fowler, Craig; Circelli, Michelle

    2018-01-01

    This discussion paper explores the possibilities and risks that data linkage presents for the vocational education and training (VET) sector. Along with a broad overview of the nature of data linkage, it highlights possible applications for data linkage in the VET sector and examines the key challenges associated with its use. A number of case…

  14. Agenda-Setting for VET Policy in the Western Balkans: Employability versus Social Inclusion

    Science.gov (United States)

    Bartlett, Will; Pagliarello, Marina Cino

    2016-01-01

    For the last decade, the Western Balkan countries have sought to modernise their vocational education and training (VET) systems, adapting them to the needs of their emerging market economies. Within the framework of the EU accession process, the policy agenda for VET policies has been strongly influenced by a range of international and domestic…

  15. Does Scored VET in Schools Help or Hinder Access to Higher Education in Victoria?

    Science.gov (United States)

    Polidano, Cain; Tabasso, Domenico; Zhang, Rong

    2014-01-01

    Despite comprising only a small fraction of all vocational education and training (VET) in Schools enrolments, programs that count towards both national VET qualifications and university entry potentially fill an important role in the upper-secondary school curriculum. The aim of this study is to take a first step in gaining an understanding of…

  16. Governance in English VET: On the Functioning of a Fractured "System"

    Science.gov (United States)

    Keep, Ewart

    2015-01-01

    This article explores the governance structures that cover vocational education and training (VET) in England. The English VET system is highly fragmented, complex and unstable, and has tended to oscillate between centralised command and control, and attempts at marketisation. Its governance arrangements reflect this situation. The various…

  17. The Impact of Disadvantage on VET Completion and Employment Gaps. Research Report

    Science.gov (United States)

    McVicar, Duncan; Tabasso, Domenico

    2016-01-01

    Increasing educational attainment is generally tied to better employment outcomes. The vocational education and training (VET) sector is often used as an entry point into post-compulsory education for individuals who have experienced disadvantage in their lives. But does increasing participation in VET by disadvantaged individuals necessarily lead…

  18. Renaissance or a Backward Step? Disparities and Tensions in Two New Swedish Pathways in VET

    Science.gov (United States)

    Berglund, Ingrid; Loeb, Ingrid Henning

    2013-01-01

    This article builds on results from studies of two new pathways in Swedish upper secondary VET. A major reform was launched in 2011 and the restructuring was presented by the Minister of Education as a "renaissance for VET education". The conclusion of the Upper Secondary Commission is that "students shall be more specialised within…

  19. Human performance assessment: methods and measures

    International Nuclear Information System (INIS)

    Andresen, Gisle; Droeivoldsmo, Asgeir

    2000-10-01

    The Human Error Analysis Project (HEAP) was initiated in 1994. The aim of the project was to acquire insights on how and why cognitive errors occur when operators are engaged in problem solving in advanced integrated control rooms. Since human error had not been studied in the HAlden Man-Machine LABoratory (HAMMLAB) before, it was also necessary to carry out research in methodology. In retrospect, it is clear that much of the methodological work is relevant to human-machine research in general, and not only to research on human error. The purpose of this report is, therefore, to give practitioners and researchers an overview of the methodological parts of HEAP. The scope of the report is limited to methods used throughout the data acquisition process, i.e., data-collection methods, data-refinement methods, and measurement methods. The data-collection methods include various types of verbal protocols, simulator logs, questionnaires, and interviews. Data-refinement methods involve different applications of the Eyecon system, a flexible data-refinement tool, and small computer programs used for rearranging, reformatting, and aggregating raw-data. Measurement methods involve assessment of diagnostic behaviour, erroneous actions, complexity, task/system performance, situation awareness, and workload. The report concludes that the data-collection methods are generally both reliable and efficient. The data-refinement methods, however, should be easier to use in order to facilitate explorative analyses. Although the series of experiments provided an opportunity for measurement validation, there are still uncertainties connected to several measures, due to their reliability still being unknown. (Author). 58 refs.,7 tabs

  20. Performance measurements of hybrid PIN diode arrays

    International Nuclear Information System (INIS)

    Jernigan, J.G.; Arens, J.F.; Collins, T.; Herring, J.; Shapiro, S.L.; Wilburn, C.D.

    1990-05-01

    We report on the successful effort to develop hybrid PIN diode arrays and to demonstrate their potential as components of vertex detectors. Hybrid pixel arrays have been fabricated by the Hughes Aircraft Co. by bump bonding readout chips developed by Hughes to an array of PIN diodes manufactured by Micron Semiconductor Inc. These hybrid pixel arrays were constructed in two configurations. One array format having 10 x 64 pixels, each 120 μm square, and the other format having 256 x 256 pixels, each 30 μm square. In both cases, the thickness of the PIN diode layer is 300 μm. Measurements of detector performance show that excellent position resolution can be achieved by interpolation. By determining the centroid of the charge cloud which spreads charge into a number of neighboring pixels, a spatial resolution of a few microns has been attained. The noise has been measured to be about 300 electrons (rms) at room temperature, as expected from KTC and dark current considerations, yielding a signal-to-noise ratio of about 100 for minimum ionizing particles. 4 refs., 13 figs

  1. VPN (Virtual Private Network) Performance Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Calderon, Calixto; Goncalves, Joao G.M.; Sequeira, Vitor [Joint Research Centre, Ispra (Italy). Inst. for the Protection and Security of the Citizen; Vandaele, Roland; Meylemans, Paul [European Commission, DG-TREN (Luxembourg)

    2003-05-01

    Virtual Private Networks (VPN) is an important technology allowing for secure communications through insecure transmission media (i.e., Internet) by adding authentication and encryption to the existing protocols. This paper describes some VPN performance indicators measured over international communication links. An ISDN based VPN link was established between the Joint Research Centre, Ispra site, Italy, and EURATOM Safeguards in Luxembourg. This link connected two EURATOM Safeguards FAST surveillance stations, and used different vendor solutions hardware (Cisco router 1720 and Nokia CC-500 Gateway). To authenticate and secure this international link, we have used several methods at the different levels of the seven-layered ISO network protocol stack (i.e., Callback feature, CHAP - Challenge Handshake Protocol - authentication protocol). The tests made involved the use of different encryption algorithms and the way session secret keys are periodically renewed, considering these elements influence significantly the transmission throughput. Future tests will include the use of a wide variety of wireless media transmission and terminal equipment technologies, in particular PDAs (Personal Digital Assistants) and Notebook PCs. These tests aim at characterising the functionality of VPNs whenever field inspectors wish to contact headquarters to access information from a central archive database or transmit local measurements or documents. These technologies cover wireless transmission needs at different geographical scales: roombased level Bluetooth, floor or building level Wi-Fi and region or country level GPRS.

  2. Optimization and evaluation of Flexicult® Vet for detection, identification and antimicrobial susceptibility testing of bacterial uropathogens in small animal veterinary practice.

    Science.gov (United States)

    Guardabassi, Luca; Hedberg, Sandra; Jessen, Lisbeth Rem; Damborg, Peter

    2015-10-26

    Urinary tract infection (UTI) is a common reason for antimicrobial prescription in dogs and cats. The objective of this study was to optimize and evaluate a culture-based point-of-care test for detection, identification and antimicrobial susceptibility testing of bacterial uro-pathogens in veterinary practice. Seventy-two urine samples from dogs and cats with suspected UTI presenting to seven veterinary facilities were used by clinical staff and an investigator to estimate sensitivity and specificity of Flexicult Vet A compared to laboratory reference standards for culture and susceptibility testing. Subsequently, the test was modified by inclusion of an oxacillin-containing compartment for detection of methicillin-resistant staphylococci. The performance of the modified product (Flexicult Vet B) for susceptibility testing was evaluated in vitro using a collection of 110 clinical isolates. Bacteriuria was reported by the laboratory in 25 (35 %) samples from the field study. The sensitivity and specificity of Flexicult Vet A for detection of bacteriuria were 83 and 100 %, respectively. Bacterial species were correctly identified in 53 and 100 % of the positive samples by clinical staff and the investigator, respectively. The susceptibility results were interpreted correctly by clinical staff for 70 % of the 94 drug-strain combinations. Higher percentages of correct interpretation were observed when the results were interpreted by the investigator in both the field (76 %) and the in vitro study (94 %). The most frequent errors were false resistance to β-lactams (ampicillin, amoxicillin-clavulanate and cephalotin) in Escherichia coli for Flexicult Vet A, and false amoxicillin-clavulanate resistance in E. coli and false ampicillin susceptibility in Staphylococcus pseudintermedius for Flexicult Vet B. The latter error can be prevented by categorizing staphylococcal strains growing in the oxacillin compartment as resistant to all β-lactams. Despite the

  3. Reforming vocational didactics by implementing a new VET teacher education

    DEFF Research Database (Denmark)

    Duch, Henriette; Andreasen, Karen Egedal

    2015-01-01

    from backgrounds with no tradition for education. Despite historical changes, the education as vocational college teacher also struggles with the interplay between theory and practice in the program and great diversity among vocational college teachers. Based on empirical data from focus group......A new education program, Diploma of Vocational Pedagogy, has recently been implemented in Denmark to upskill vocational college teachers and improve didactics at VET colleges in general. Among many challenges, vocational college teachers have to adapt their pedagogy to a large number of students...... interviews with students from the Diploma of Vocational Pedagogy program and concepts developed by Bernstein and Bourdieu, the article analyzes how these aspects might affect the development of new vocational didactics. We know that it is not easy to change the culture of educational institutions...

  4. 45 CFR 305.40 - Penalty performance measures and levels.

    Science.gov (United States)

    2010-10-01

    ... HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.40 Penalty performance measures and levels. (a) There are three performance measures for which States must... 45 Public Welfare 2 2010-10-01 2010-10-01 false Penalty performance measures and levels. 305.40...

  5. High Job Performance Through Co-Developing Performance Measures With Employees

    NARCIS (Netherlands)

    Groen, Bianca A.C.; Wilderom, Celeste P.M.; Wouters, Marc

    2017-01-01

    According to various studies, employee participation in the development of performance measures can increase job performance. This study focuses on how this job performance elevation occurs. We hypothesize that when employees have participated in the development of performance measures, they

  6. CONSIDERATIONS ON MEASURING PERFORMANCE AND MARKET STRUCTURE

    OpenAIRE

    Spiridon Cosmin Alexandru

    2011-01-01

    According to neoclassical theory, the relationship between the price, respectively of marginal cost and market structures, the methods for determining the performance of a firm or of an industry, deviate from the model of perfect competition. Assessing performance involves performing comparisons, reporting that their reference level can be a standard value, or a statistical value which can be a national-regional average, a homogeneous group, or an average value at a market level. Modern theor...

  7. Measuring individual work performance: Identifying and selecting indicators

    NARCIS (Netherlands)

    Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; de Vet, H.C.W.; van der Beek, A.J.

    2014-01-01

    BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions.

  8. Measuring individual work performance: identifying and selecting indicators

    NARCIS (Netherlands)

    Koopmans, L.; Bernaards, C.M.; Hildebrandt, V.H.; Vet, H.C de; Beek, A.J. van der

    2014-01-01

    BACKGROUND: Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. OBJECTIVE: This

  9. Developing integrated benchmarks for DOE performance measurement

    Energy Technology Data Exchange (ETDEWEB)

    Barancik, J.I.; Kramer, C.F.; Thode, Jr. H.C.

    1992-09-30

    The objectives of this task were to describe and evaluate selected existing sources of information on occupational safety and health with emphasis on hazard and exposure assessment, abatement, training, reporting, and control identifying for exposure and outcome in preparation for developing DOE performance benchmarks. Existing resources and methodologies were assessed for their potential use as practical performance benchmarks. Strengths and limitations of current data resources were identified. Guidelines were outlined for developing new or improved performance factors, which then could become the basis for selecting performance benchmarks. Data bases for non-DOE comparison populations were identified so that DOE performance could be assessed relative to non-DOE occupational and industrial groups. Systems approaches were described which can be used to link hazards and exposure, event occurrence, and adverse outcome factors, as needed to generate valid, reliable, and predictive performance benchmarks. Data bases were identified which contain information relevant to one or more performance assessment categories . A list of 72 potential performance benchmarks was prepared to illustrate the kinds of information that can be produced through a benchmark development program. Current information resources which may be used to develop potential performance benchmarks are limited. There is need to develop an occupational safety and health information and data system in DOE, which is capable of incorporating demonstrated and documented performance benchmarks prior to, or concurrent with the development of hardware and software. A key to the success of this systems approach is rigorous development and demonstration of performance benchmark equivalents to users of such data before system hardware and software commitments are institutionalized.

  10. Measuring Student Performance in General Organic Chemistry

    Science.gov (United States)

    Austin, Ara C.; Ben-Daat, Hagit; Zhu, Mary; Atkinson, Robert; Barrows, Nathan; Gould, Ian R.

    2015-01-01

    Student performance in general organic chemistry courses is determined by a wide range of factors including cognitive ability, motivation and cultural capital. Previous work on cognitive factors has tended to focus on specific areas rather than exploring performance across all problem types and cognitive skills. In this study, we have categorized…

  11. Performance measures for public transit mobility management.

    Science.gov (United States)

    2011-12-01

    "Mobility management is an innovative approach for managing and delivering coordinated public : transportation services that embraces the full family of public transit options. At a national level, there are : currently no industry recognized perform...

  12. Measured performance of the GTA rf systems

    International Nuclear Information System (INIS)

    Denney, P.M.; Jachim, S.P.

    1993-01-01

    This paper describes the performance of the RF systems on the Ground Test Accelerator (GTA). The RF system architecture is briefly described. Among the RF performance results presented are RF field flatness and stability, amplitude and phase control resolution, and control system bandwidth and stability. The rejection by the RF systems of beam-induced disturbances, such as transients and noise, are analyzed. The observed responses are also compared to computer-based simulations of the RF systems for validation

  13. Performance Measurement Systems in Swedish Health Care Services

    OpenAIRE

    Kollberg, Beata

    2007-01-01

    In the quality management literature, measurements are attributed great importance in improving products and processes. Systems for performance measurement assessing financial and non-financial measurements were developed in the late 1980s and early 1990s. The research on performance measurement systems has mainly been focused on the design of different performance measurement systems. Many authors are occupied with the study of the constructs of measures and developing prescriptive models of...

  14. Implementing Human Resources Management (HRM) within Dutch VET schools: Examining the fostering and hindering factors

    NARCIS (Netherlands)

    Runhaar, P.R.; Sanders, K.

    2013-01-01

    Vocational Education and Training (VET) Institutions face serious challenges, like the implementation of competence-based education and upcoming teacher shortages, which urge them to implement Human Resources Management policy and practices (HRM). The implementation of HRM, however, often stagnates.

  15. ESRD - Clinical Performance Measures (CPM) Project

    Data.gov (United States)

    U.S. Department of Health & Human Services — Section 4558 (b) of the Balanced Budget Act (BBA) requires CMS to develop and implement by January 1, 2000, a method to measure and report the quality of renal...

  16. Measuring collections effort improves cash performance.

    Science.gov (United States)

    Shutts, Joe

    2009-09-01

    Having a satisfied work force can lead to an improved collections effort. Hiring the right people and training them ensures employee engagement. Measuring collections effort and offering incentives is key to revenue cycle success.

  17. Reduction in the balanced scorecard performance measurement ...

    African Journals Online (AJOL)

    In this paper, we compare PCA and ordinal logistic regression in ranking the manufacturing systems. In this regard we present an integrated framework for assessment and ranking of manufacturing systems based on management and organizational performance indicators. To achieve the objectives of this study, ...

  18. Measuring Institutional Performance in Higher Education.

    Science.gov (United States)

    Meyerson, Joel W., Ed.; Massy, William F., Ed.

    This collection of seven essays from the Stanford Forum for Higher Education Futures focuses on how downsizing, quality management, and reengineering have are affecting higher education. An introductory paper, "Introduction: Change in Higher Education: Its Effect on Institutional Performance," (Joel W. Meyerson and Sandra L. Johnson)…

  19. 75 FR 38725 - Service Performance Measurement

    Science.gov (United States)

    2010-07-06

    ... proposed rules against the importance of the information that is being gathered. This would have provided... Commission is adopting a final rule on service perfomance measurement and customer satisfaction. The final... is effective on August 5, 2010. FOR FURTHER INFORMATION CONTACT: Stephen L. Sharfman, General Counsel...

  20. CONFOCAL MICROSCOPY SYSTEM PERFORMANCE: LASER POWER MEASUREMENTS

    Science.gov (United States)

    Laser power abstract The reliability of the confocal laser-scanning microscope (CLSM) to obtain intensity measurements and quantify fluorescence data is dependent on using a correctly aligned machine that contains a stable laser power. The laser power test appears to be one ...

  1. Measurements of operator performance - an experimental setup

    International Nuclear Information System (INIS)

    Netland, K.

    1980-01-01

    The human has to be considered as an important element in a process control system, even if the degree of automation is extremely high. Other elements, e.g. computer, displays, etc., can to a large extent be described and quantified. The human (operator), is difficult to describe in a precise way, and it is just as difficult to predict his thinking and acting in a control room environment. Many factors influence his performance, such as: experience, motivation, level of knowledge, training, control environment, job organization, etc. These factors have to a certain degree to be described before guidelines for design of the man-process interfaces and the control room layout can be developed. For decades, the psychological science has obtained knowledge of the human mind and behaviour. This knowledge should have the potential of a positive input on our effort to describe the factors influencing the operator performance. Even if the human is complex, a better understanding of his thinking and acting, and a more precise description of the factors influencing his performance can be obtained. At OECD Halden Reactor Project an experimental set-up for such studies has been developed and implemented in the computer laboratory. The present set-up includes elements as a computer- and display-based control room, a simulator representing a nuclear power plant, training programme for the subjects, and methods for the experiments. Set-up modules allow reconfiguration of experiments. (orig./HP)

  2. Evaluating performance measures to determine training effectiveness

    International Nuclear Information System (INIS)

    Klemm, R.W.; Feiza, A.S.

    1987-01-01

    This research was conceived and dedicated to helping the CECo training organization become a more integrated part of the corporate business. The target population for this study was nuclear and fossil generating station employees who directly impacted the production of electricity. The target sample (n = 150) included: instrument, mechanical, and electrical maintenance personnel; control room operators; engineers, radiation chemists, and other technical specialists; and equipment operators and attendants. A total of four instruments were utilized by this study. Three instruments were administered to the generating station personnel. These included a demographic form, a learning style profile, and a motivational style profile. The focal instrument, a performance skills rating form, was administered to supervisory personnel. Data analysis consisted of three major parts. Part one established internal consistency through Cronbach alpha statistics. Part two provides summary statistics and breakdown tables for important variables. Part three provides inferential statistics responding to the research questions. All six Performance Skills variables discriminated significantly between the trained and non-trained groups (p .001). In all cases, the mean value for the trained group exceeded the mean value for the non-trained group. Implications for further research indicate that training does have a quantifiable effect on job performance

  3. 26 CFR 801.2 - Measuring organizational performance.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 20 2010-04-01 2010-04-01 false Measuring organizational performance. 801.2 Section 801.2 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INTERNAL... REVENUE SERVICE § 801.2 Measuring organizational performance. The performance measures that comprise the...

  4. "Productivity performance measurement - follow-up"

    DEFF Research Database (Denmark)

    Kristensen, Troels

    2008-01-01

    The Danish Ministry of Health has published the third annual report on hospital productivity. This experience has contributed to policy goals becoming more detailed and ambitious. New policy goals are: to include hospital productivity measures at less aggregated levels, to include labour producti...... productivity and hospital psychiatric care, to provide web-based solutions that facilitate access to productivity data, and to develop new classifications of hospital levels related to structural reforms....

  5. Measuring systemic performance of the Lithuanian government

    OpenAIRE

    Nakrošis, Vitalis

    2008-01-01

    This paper seeks assessing the dynamics of Lithuania's governmental perfor­mance and comparing it to other countries. It draws on a simple logical model, linking the inputs of the government to its outputs and outcomes. It was found that performance of the Lithuanian government is average and even poor, if compared with the EU aver­age or such countries as Estonia and Ireland. This is despite the fact the public mode of production is rather expensive in Lithuania and the number of public empl...

  6. Measuring performances of linux hyper visors

    International Nuclear Information System (INIS)

    Chierici, A.; Veraldi, R.; Salomoni, D.

    2009-01-01

    Virtualisation is a now proven software technology that is rapidly transforming the I T landscape and fundamentally changing the way people make computations and implement services. Recently, all major software producers (e.g., Microsoft and Red Hat) developed or acquired virtualisation technologies. Our institute (http://www.CNAF.INFN.it) is a Tier l for experiments carried on at the Large Hadron Collider at CERN (http://lhc.web.CERN.ch/lhc/) and is experiencing several benefits from virtualisation technologies, like improving fault tolerance, providing efficient hardware resource usage and increasing security. Currently, the virtualisation solution we adopted is xen, which is well supported by the Scientific Linux distribution, widely used by the High-Energy Physics (HEP) community. Since Scientific Linux is based on Red Hat E S, we felt the need to investigate performances and usability differences with the new k vm technology, recently acquired by Red Hat. The case study of this work is the Tier2 site for the LHCb experiment hosted at our institute; all major grid elements for this Tier2 run on xen virtual machines smoothly. We will investigate the impact on performance and stability that a migration to k vm would entail on the Tier2 site, as well as the effort required by a system administrator to deploy the migration.

  7. Drivers of Performance Measurement Use: Empirical Evidence from Serbia

    Directory of Open Access Journals (Sweden)

    Miloš Milosavljević

    2016-05-01

    Full Text Available In the last decades, the interest of academics and practitioners for the efficiency of performance measurement system use has grown rapidly. The aim of this paper is to examine, articulate and test the relationship between maturity of performance measurement systems, strategic compliance of performance measurement and managerial orientation, on one side, and the portfolio of performance measurement uses, on the other. Data were collected from 86 Serbian companies. The results indicate that the most influential factor for diversified use of performance measurement is the maturity of the system. The paper also discusses theoretical contributions, implications for managers and scholars, and recommendations for decision-makers.

  8. Rapid detection of serum antibody by dual-path platform VetTB assay in white-tailed deer infected with Mycobacterium bovis.

    Science.gov (United States)

    Lyashchenko, Konstantin P; Greenwald, Rena; Esfandiari, Javan; O'Brien, Daniel J; Schmitt, Stephen M; Palmer, Mitchell V; Waters, W Ray

    2013-06-01

    Bovine tuberculosis (TB) in cervids remains a significant problem affecting farmed herds and wild populations. Traditional skin testing has serious limitations in certain species, whereas emerging serological assays showed promising diagnostic performance. The recently developed immunochromatographic dual-path platform (DPP) VetTB assay has two antigen bands, T1 (MPB83 protein) and T2 (CFP10/ESAT-6 fusion protein), for antibody detection. We evaluated the diagnostic accuracy of this test by using serum samples collected from groups of white-tailed deer experimentally inoculated with Mycobacterium bovis, M. avium subsp. paratuberculosis, or M. bovis BCG Pasteur. In addition, we used serum samples from farmed white-tailed deer in herds with no history of TB, as well as from free-ranging white-tailed deer culled during field surveillance studies performed in Michigan known to have bovine TB in the wild deer population. The DPP VetTB assay detected antibody responses in 58.1% of experimentally infected animals within 8 to 16 weeks postinoculation and in 71.9% of naturally infected deer, resulting in an estimated test sensitivity of 65.1% and a specificity of 97.8%. The higher seroreactivity found in deer with naturally acquired M. bovis infection was associated with an increased frequency of antibody responses to the ESAT-6 and CFP10 proteins, resulting in a greater contribution of these antigens, in addition to MPB83, to the detection of seropositive animals, compared with experimental M. bovis infection. Deer experimentally inoculated with either M. avium subsp. paratuberculosis or M. bovis BCG Pasteur did not produce cross-reactive antibodies that could be detected by the DPP VetTB assay. The present findings demonstrate the relatively high diagnostic accuracy of the DPP VetTB test for white-tailed deer, especially in the detection of naturally infected animals.

  9. Employee participation in developing performance measures and job performance: on the role of measurement properties and incentives

    NARCIS (Netherlands)

    Groen, B.; Wouters, M.; Wilderom, C.

    2013-01-01

    Involving employees in the development of performance measures often results in better employee job performance. Yet not all prior studies find such a direct effect. This study explains these inconsistent findings. It focuses on the measurement properties of performance measures and using them for

  10. A comparative study of performance measurement standards of railway operator

    Directory of Open Access Journals (Sweden)

    Pongjirawut Siripong

    2017-01-01

    Full Text Available The European standard (EN 13816, is one of the widely accepted standards for measuring the quality of public passenger transport (PPT service. EN 13816 indicates 8 measurement criteria, 29 sub-criteria and 193 Key Performance Indicators (KPIs to be used to measure the performance of railway operators. Nowadays, there are other addition criteria beyond EN13816, developed by various organisations. This research firstly aims to explore the service performance measurement of railway operators used by actual railway operators at international level and in Thailand. After an intensive review of performance measurement standards, 9 standards are compiled and compared in terms of criteria, sub-criteria and KPIs using a cluster analysis methodology. The result found additional performance measurement aspects at 2 sub-criteria and 91 KPIs in addition to EN 13816. This research summarized and compared different performance measurement standards to measure service quality of metro rail line.

  11. Performance Measurement of Complex Event Platforms

    Directory of Open Access Journals (Sweden)

    Eva Zámečníková

    2016-12-01

    Full Text Available The aim of this paper is to find and compare existing solutions of complex event processing platforms (CEP. CEP platforms generally serve for processing and/or predicting of high frequency data. We intend to use CEP platform for processing of complex time series and integrate a solution for newly proposed method of decision making. The decision making process will be described by formal grammar. As there are lots of CEP solutions we will take the following characteristics under consideration - the processing in real time, possibility of processing of high volume data from multiple sources, platform independence, platform allowing integration with user solution and open license. At first we will talk about existing CEP tools and their specific way of use in praxis. Then we will mention the design of method for formalization of business rules used for decision making. Afterwards, we focus on two platforms which seem to be the best fit for integration of our solution and we will list the main pros and cons of each approach. Next part is devoted to benchmark platforms for CEP. Final part is devoted to experimental measurements of platform with integrated method for decision support.

  12. Interaction between research and diagnosis and surveillance of avian influenza within the Caribbean animal health network (CaribVET).

    Science.gov (United States)

    Lefrançois, T; Hendrikx, P; Vachiéry, N; Ehrhardt, N; Millien, M; Gomez, L; Gouyet, L; Gerbier, G; Gongora, V; Shaw, J; Trotman, M

    2010-04-01

    The Caribbean region is considered to be at risk for avian influenza (AI) because of predominance of the backyard poultry system, important commercial poultry production, migratory birds and disparities in the surveillance systems. The Caribbean animal health network (CaribVET) has developed tools to implement AI surveillance in the region: (i) a regionally harmonized surveillance protocol, (ii) specific web pages for AI surveillance on http://www.caribvet.net, and (iii) a diagnostic network for the Caribbean including AI virus molecular diagnostic capability in Guadeloupe and technology transfer. Altogether 303 samples from four Caribbean countries were tested between June 2006 and March 2009 by real time PCR either for importation purposes or following clinical suspicion. Following AI H5N2 outbreaks in the Dominican Republic in 2007, a questionnaire was developed to collect data for risk analysis of AI spread in the region through fighting cocks. The infection pathway of Martinique commercial poultry sector by AI through introduction of infected cocks was designed and recommendations were provided to the Caribbean veterinary services to improve fighting cock movement controls and biosecurity measures. Altogether, these CaribVET activities contribute to strengthen surveillance of AI in the Caribbean region and may allow the development of research studies on AI risk analysis.

  13. Performance measurement, expectancy and agency theory: An experimental study

    NARCIS (Netherlands)

    Sloof, R.; van Praag, C.M.

    2008-01-01

    Theoretical analyses of (optimal) performance measures are typically performed within the realm of the linear agency model. This model implies that, for a given compensation scheme, the agent’s optimal effort is unrelated to the amount of noise in the performance measure. In contrast, expectancy

  14. Development of material measures for performance verifying surface topography measuring instruments

    International Nuclear Information System (INIS)

    Leach, Richard; Giusca, Claudiu; Rickens, Kai; Riemer, Oltmann; Rubert, Paul

    2014-01-01

    The development of two irregular-geometry material measures for performance verifying surface topography measuring instruments is described. The material measures are designed to be used to performance verify tactile and optical areal surface topography measuring instruments. The manufacture of the material measures using diamond turning followed by nickel electroforming is described in detail. Measurement results are then obtained using a traceable stylus instrument and a commercial coherence scanning interferometer, and the results are shown to agree to within the measurement uncertainties. The material measures are now commercially available as part of a suite of material measures aimed at the calibration and performance verification of areal surface topography measuring instruments

  15. VetCompass Australia: A National Big Data Collection System for Veterinary Science.

    Science.gov (United States)

    McGreevy, Paul; Thomson, Peter; Dhand, Navneet K; Raubenheimer, David; Masters, Sophie; Mansfield, Caroline S; Baldwin, Timothy; Soares Magalhaes, Ricardo J; Rand, Jacquie; Hill, Peter; Peaston, Anne; Gilkerson, James; Combs, Martin; Raidal, Shane; Irwin, Peter; Irons, Peter; Squires, Richard; Brodbelt, David; Hammond, Jeremy

    2017-09-26

    VetCompass Australia is veterinary medical records-based research coordinated with the global VetCompass endeavor to maximize its quality and effectiveness for Australian companion animals (cats, dogs, and horses). Bringing together all seven Australian veterinary schools, it is the first nationwide surveillance system collating clinical records on companion-animal diseases and treatments. VetCompass data service collects and aggregates real-time, clinical records for researchers to interrogate, delivering sustainable and cost-effective access to data from hundreds of veterinary practitioners nationwide. Analysis of these clinical records will reveal geographical and temporal trends in the prevalence of inherited and acquired diseases, identify frequently prescribed treatments, revolutionize clinical auditing, help the veterinary profession to rank research priorities, and assure evidence-based companion-animal curricula in veterinary schools. VetCompass Australia will progress in three phases: (1) roll-out of the VetCompass platform to harvest Australian veterinary clinical record data; (2) development and enrichment of the coding (data-presentation) platform; and (3) creation of a world-first, real-time surveillance interface with natural language processing (NLP) technology. The first of these three phases is described in the current article. Advances in the collection and sharing of records from numerous practices will enable veterinary professionals to deliver a vastly improved level of care for companion animals that will improve their quality of life.

  16. VetCompass Australia: A National Big Data Collection System for Veterinary Science

    Directory of Open Access Journals (Sweden)

    Paul McGreevy

    2017-09-01

    Full Text Available VetCompass Australia is veterinary medical records-based research coordinated with the global VetCompass endeavor to maximize its quality and effectiveness for Australian companion animals (cats, dogs, and horses. Bringing together all seven Australian veterinary schools, it is the first nationwide surveillance system collating clinical records on companion-animal diseases and treatments. VetCompass data service collects and aggregates real-time, clinical records for researchers to interrogate, delivering sustainable and cost-effective access to data from hundreds of veterinary practitioners nationwide. Analysis of these clinical records will reveal geographical and temporal trends in the prevalence of inherited and acquired diseases, identify frequently prescribed treatments, revolutionize clinical auditing, help the veterinary profession to rank research priorities, and assure evidence-based companion-animal curricula in veterinary schools. VetCompass Australia will progress in three phases: (1 roll-out of the VetCompass platform to harvest Australian veterinary clinical record data; (2 development and enrichment of the coding (data-presentation platform; and (3 creation of a world-first, real-time surveillance interface with natural language processing (NLP technology. The first of these three phases is described in the current article. Advances in the collection and sharing of records from numerous practices will enable veterinary professionals to deliver a vastly improved level of care for companion animals that will improve their quality of life.

  17. PERFORMANCE MEASURES OF STUDENTS IN EXAMINATIONS: A STOCHASTIC APPROACH

    OpenAIRE

    Goutam Saha; GOUTAM SAHA

    2013-01-01

    Data on Secondary and Higher Secondary examination (science stream) results from Tripura (North-East India) schools are analyzed to measure the performance of students based on tests and also the performance measures of schools based on final results and continuous assessment processes are obtained. The result variation in terms of grade points in the Secondary and Higher Secondary examinations are analysed using different sets of performance measures. The transition probabilities from one g...

  18. Procedure for Measuring and Reporting Commercial Building Energy Performance

    Energy Technology Data Exchange (ETDEWEB)

    Barley, D.; Deru, M.; Pless, S.; Torcellini, P.

    2005-10-01

    This procedure is intended to provide a standard method for measuring and characterizing the energy performance of commercial buildings. The procedure determines the energy consumption, electrical energy demand, and on-site energy production in existing commercial buildings of all types. The performance metrics determined here may be compared against benchmarks to evaluate performance and verify that performance targets have been achieved.

  19. The Aviation Performance Measuring System (APMS): An Integrated Suite of Tools for Measuring Performance and Safety

    Science.gov (United States)

    Statler, Irving C.; Connor, Mary M. (Technical Monitor)

    1998-01-01

    This is a report of work in progress. In it, I summarize the status of the research and development of the Aviation Performance Measuring System (APMS) for managing, processing, and analyzing digital flight-recorded data, The objectives of the NASA-FAA APMS research project are to establish a sound scientific and technological basis for flight-data analysis, to define an open and flexible architecture for flight-data analysis systems, and to articulate guidelines for a standardized database structure on which to continue to build future flight-data-analysis extensions. APMS offers to the air transport community an open, voluntary standard for flight-data-analysis software; a standard that will help to ensure suitable functionality and data interchangeability among competing software programs. APMS will develop and document the methodologies, algorithms, and procedures for data management and analyses to enable users to easily interpret the implications regarding safety and efficiency of operations. APMS does not entail the implementation of a nationwide flight-data-collection system. It is intended to provide technical tools to ease the large-scale implementation of flight-data analyses at both the air-carrier and the national-airspace levels in support of their Flight Operations and Quality Assurance (FOQA) Programs and Advanced Qualifications Programs (AQP). APMS cannot meet its objectives unless it develops tools that go substantially beyond the capabilities of the current commercially available software and supporting analytic methods that are mainly designed to count special events. These existing capabilities, while of proven value, were created primarily with the needs-of aircrews in mind. APMS tools must serve the needs of the government and air carriers, as well as aircrews, to fully support the FOQA and AQP programs. They must be able to derive knowledge not only through the analysis of single flights (special-event detection), but also through

  20. Transportation performance measures for outcome based system management and monitoring.

    Science.gov (United States)

    2014-09-01

    The Oregon Department of Transportation (ODOT) is mature in its development and use of : performance measures, however there was not a standard approach for selecting measures nor : evaluating if existing ones were used to inform decision-making. Thi...

  1. Performance Measures for Public Participation Methods : Final Report

    Science.gov (United States)

    2018-01-01

    Public engagement is an important part of transportation project development, but measuring its effectiveness is typically piecemealed. Performance measurementdescribed by the Urban Institute as the measurement on a regular basis of the results (o...

  2. Measuring the marketing performances of state forest enterprises in ...

    African Journals Online (AJOL)

    Measuring the marketing performances of state forest enterprises in Turkey. ... This study covers a limited period of time (1999 - 2003), and 41 variables were developed in order to measure the marketing ... AJOL African Journals Online.

  3. Automatic vetting of planet candidates from ground based surveys: Machine learning with NGTS

    Science.gov (United States)

    Armstrong, David J.; Günther, Maximilian N.; McCormac, James; Smith, Alexis M. S.; Bayliss, Daniel; Bouchy, François; Burleigh, Matthew R.; Casewell, Sarah; Eigmüller, Philipp; Gillen, Edward; Goad, Michael R.; Hodgkin, Simon T.; Jenkins, James S.; Louden, Tom; Metrailler, Lionel; Pollacco, Don; Poppenhaeger, Katja; Queloz, Didier; Raynard, Liam; Rauer, Heike; Udry, Stéphane; Walker, Simon R.; Watson, Christopher A.; West, Richard G.; Wheatley, Peter J.

    2018-05-01

    State of the art exoplanet transit surveys are producing ever increasing quantities of data. To make the best use of this resource, in detecting interesting planetary systems or in determining accurate planetary population statistics, requires new automated methods. Here we describe a machine learning algorithm that forms an integral part of the pipeline for the NGTS transit survey, demonstrating the efficacy of machine learning in selecting planetary candidates from multi-night ground based survey data. Our method uses a combination of random forests and self-organising-maps to rank planetary candidates, achieving an AUC score of 97.6% in ranking 12368 injected planets against 27496 false positives in the NGTS data. We build on past examples by using injected transit signals to form a training set, a necessary development for applying similar methods to upcoming surveys. We also make the autovet code used to implement the algorithm publicly accessible. autovet is designed to perform machine learned vetting of planetary candidates, and can utilise a variety of methods. The apparent robustness of machine learning techniques, whether on space-based or the qualitatively different ground-based data, highlights their importance to future surveys such as TESS and PLATO and the need to better understand their advantages and pitfalls in an exoplanetary context.

  4. Joint Integration Test Facility (JITF) Engineering II Performance Measurement Plans

    National Research Council Canada - National Science Library

    Boucher, Joanne

    2001-01-01

    ..., effectiveness, and accountability in federal programs and spending. The plan establishes six separate performance measurements, which correlate directly to customer satisfaction, Intelligence Mission Application (IMA...

  5. New’ Performance Measures: Determinants of Their Use and Their Impact on Performance

    NARCIS (Netherlands)

    F.H.M. Verbeeten (Frank)

    2005-01-01

    textabstractThis study investigates the extent to which Dutch organizations use ‘new’ performance measures to deal with the perceived inadequacies of traditional accounting performance measures. In addition, the determinants of the use of these ‘new’ performance measures are documented; finally, the

  6. Vocational education and training (VET) as a career path for young people

    DEFF Research Database (Denmark)

    Kersh, Natasha; Juul, Ida

    This paper aims to contribute to a better understanding of the issues of perceptions and motivations of young people towards Vocational Education and Training (VET) in England and Denmark. It specifically focuses on factors that facilitate their either positive or negative attitudes. Complex....... The situation in most European countries is being characterised by a lack of parity of esteem, which relates to the perceptions of VET systems as the second-best choice, compared to academic routes. Enhancing the status and profile of the VET system is therefore a concern that has received much recognition...... in literature and policy papers on both national and European levels. This research paper draws on the findings from the ‘Experiencing Inequalities’ project funded by the Economic and Social Research Council (ESRC) carried out under the auspices of the ESRC Research Centre: Learning and Life Chances...

  7. Environmental Uncertainty, Performance Measure Variety and Perceived Performance in Icelandic Companies

    DEFF Research Database (Denmark)

    Rikhardsson, Pall; Sigurjonsson, Throstur Olaf; Arnardottir, Audur Arna

    and the perceived performance of the company. The sample was the 300 largest companies in Iceland and the response rate was 27%. Compared to other studies the majority of the respondents use a surprisingly high number of different measures – both financial and non-financial. This made testing of the three......The use of performance measures and performance measurement frameworks has increased significantly in recent years. The type and variety of performance measures in use has been researched in various countries and linked to different variables such as the external environment, performance...... measurement frameworks, and management characteristics. This paper reports the results of a study carried out at year end 2013 of the use of performance measures by Icelandic companies and the links to perceived environmental uncertainty, management satisfaction with the performance measurement system...

  8. Predicting Document Retrieval System Performance: An Expected Precision Measure.

    Science.gov (United States)

    Losee, Robert M., Jr.

    1987-01-01

    Describes an expected precision (EP) measure designed to predict document retrieval performance. Highlights include decision theoretic models; precision and recall as measures of system performance; EP graphs; relevance feedback; and computing the retrieval status value of a document for two models, the Binary Independent Model and the Two Poisson…

  9. A customer perspective on performance measurement in humanitarian supply chains

    OpenAIRE

    Schiffling, Sarah

    2013-01-01

    The increasing importance of services in SCM leads to a stronger focus on the customer perspective. Donors and beneficiaries are two distinct customer groups of humanitarian supply chains. This paper will analyse how this impacts performance measurement for example in the commonly used balanced scorecard, which includes a customer perspective. Keywords: Performance measurement, Humanitarian logistics, Customer perspective

  10. Automating Performance Measures and Clinical Practice Guidelines: Differences and Complementarities.

    Science.gov (United States)

    Tu, Samson W; Martins, Susana; Oshiro, Connie; Yuen, Kaeli; Wang, Dan; Robinson, Amy; Ashcraft, Michael; Heidenreich, Paul A; Goldstein, Mary K

    2016-01-01

    Through close analysis of two pairs of systems that implement the automated evaluation of performance measures (PMs) and guideline-based clinical decision support (CDS), we contrast differences in their knowledge encoding and necessary changes to a CDS system that provides management recommendations for patients failing performance measures. We trace the sources of differences to the implementation environments and goals of PMs and CDS.

  11. Supply chain oriented performance measurement for automotive spare parts

    NARCIS (Netherlands)

    de Leeuw, S.L.J.M.; Beekman, L.

    2008-01-01

    Literature provides a number of conceptual frameworks and discussions on performance measurement in supply chains. However, most of these frameworks focus on a single link of a supply chain. Furthermore, there is a lack of empirical analysis and case studies on performance metrics and measurements

  12. Comparison of avian biochemical test results with Abaxis VetScan and Hitachi 911 analyzers.

    Science.gov (United States)

    Greenacre, Cheryl B; Flatland, Bente; Souza, Marcy J; Fry, Michael M

    2008-12-01

    To compare results of clinical biochemical analysis using an Abaxis VetScan bench-top analyzer with reagents specifically marketed for avian use and a Hitachi 911 analyzer, plasma (both methods) and whole blood (VetScan method) samples from 20 clinically healthy Hispaniolan Amazon parrots (Amazona ventralis) were analyzed. Correlation between methods was very high (r = 0.9-1.0) for aspartate aminotransferase (AST), calcium, glucose, and uric acid; high (r = 0.7-0.89) for creatine kinase (CK), phosphorus, potassium, and total protein; moderate (r = 0.5-0.69) for globulin; and low (r = 0.3-0.49) for albumin and sodium. VetScan analyzer results for globulin, sodium, and uric acid had a constant negative bias (values below those from the Hitachi method). Based on difference plot analysis, results for AST, calcium, CK, and glucose are comparable. Because 16 of 20 values fell below the lower detection limit of the VetScan analyzer, bile acid data were excluded from analysis. By using a relatively small sample size (0.1 ml whole blood or plasma), the VetScan analyzer offers rapid in-house results, compact size, and ease of operation. For 4 of the most clinically relevant biochemical analytes used in avian medicine (AST, calcium, CK, glucose), it offers reliable values. For an additional 4 analytes (phosphorous, potassium, total protein, uric acid), establishing analyzer-specific reference intervals is recommended. Neither the VetScan nor the Hitachi method is recommended to assess albumin and globulin concentrations.

  13. Transfer of information from personal health records: a survey of veterans using My HealtheVet.

    Science.gov (United States)

    Turvey, Carolyn L; Zulman, Donna M; Nazi, Kim M; Wakefield, Bonnie J; Woods, Susan S; Hogan, Timothy P; Weaver, Frances M; McInnes, Keith

    2012-03-01

    Personal health records provide patients with ownership of their health information and allow them to share information with multiple healthcare providers. However, the usefulness of these records relies on patients understanding and using their records appropriately. My HealtheVet is a Web-based patient portal containing a personal health record administered by the Veterans Health Administration. The goal of this study was to explore veterans' interest and use of My HealtheVet to transfer and share information as well as to identify opportunities to increase veteran use of the My HealtheVet functions. Two waves of data were collected in 2010 through an American Customer Satisfaction Index Web-based survey. A random sample of veterans using My HealtheVet was invited to participate in the survey conducted on the My HealtheVet portal through a Web-based pop-up browser window. Wave One results (n=25,898) found that 41% of veterans reported printing information, 21% reported saving information electronically, and only 4% ever sent information from My HealtheVet to another person. In Wave Two (n=18,471), 30% reported self-entering medication information, with 18% sharing this information with their Veterans Affairs (VA) provider and 9.6% sharing with their non-VA provider. Although veterans are transferring important medical information from their personal health records, increased education and awareness are needed to increase use. Personal health records have the potential to improve continuity of care. However, more research is needed on both the barriers to adoption as well as the actual impact on patient health outcomes and well-being.

  14. VetCompass Australia: A National Big Data Collection System for Veterinary Science

    Science.gov (United States)

    McGreevy, Paul; Thomson, Peter; Dhand, Navneet K.; Raubenheimer, David; Masters, Sophie; Mansfield, Caroline S.; Baldwin, Timothy; Soares Magalhaes, Ricardo J.; Rand, Jacquie; Hill, Peter; Gilkerson, James; Combs, Martin; Raidal, Shane; Irwin, Peter; Irons, Peter; Squires, Richard; Brodbelt, David; Hammond, Jeremy

    2017-01-01

    Simple Summary The VetCompass Australia program collects real-time clinical records from veterinary practices and aggregates them for researchers to interrogate. It delivers Australian researchers sustainable and cost-effective access to authoritative data from hundreds of veterinary practitioners, across Australia and opens up major international collaborative opportunities with related projects in the United Kingdom and elsewhere. Abstract VetCompass Australia is veterinary medical records-based research coordinated with the global VetCompass endeavor to maximize its quality and effectiveness for Australian companion animals (cats, dogs, and horses). Bringing together all seven Australian veterinary schools, it is the first nationwide surveillance system collating clinical records on companion-animal diseases and treatments. VetCompass data service collects and aggregates real-time, clinical records for researchers to interrogate, delivering sustainable and cost-effective access to data from hundreds of veterinary practitioners nationwide. Analysis of these clinical records will reveal geographical and temporal trends in the prevalence of inherited and acquired diseases, identify frequently prescribed treatments, revolutionize clinical auditing, help the veterinary profession to rank research priorities, and assure evidence-based companion-animal curricula in veterinary schools. VetCompass Australia will progress in three phases: (1) roll-out of the VetCompass platform to harvest Australian veterinary clinical record data; (2) development and enrichment of the coding (data-presentation) platform; and (3) creation of a world-first, real-time surveillance interface with natural language processing (NLP) technology. The first of these three phases is described in the current article. Advances in the collection and sharing of records from numerous practices will enable veterinary professionals to deliver a vastly improved level of care for companion animals that will

  15. A Study on Relationships between Functional Performance and Task Performance Measure through Experiments in NPP MCR

    International Nuclear Information System (INIS)

    Jang, In Seok; Seong, Poong Hyun; Park, Jin Kyun

    2011-01-01

    Further improvements in levels of organization, management, man-machine interfaces, education, training, etc. are required, if high operating reliability of operators in huge and complex plants such as chemical plants and electrical power generating plants is to be maintained. Improvement requires good understanding of operators' behavior, including defining what is good performance for operators, especially in emergency situations. Human performance measures, therefore, are important to enhance performance and to reduce the probability of incidents and accidents in Nuclear Power Plants (NPPs). Operators' performance measures are used for multi-objectives such as control room design, human system interface evaluation, training, procedure and so on. There are two kinds of representative methods to measure operators' performance. These methods are now known as the functional performance measure and task performance measure. Functional performance measures are basically based on the plant process parameters. Functional performance measures indicate how well the operators controlled selected critical parameters. The parameters selected in this paper are derived from the four Critical Safety Functions (CSFs) identified in the emergency operating procedures such as achievement of subcriticality, maintenance of core cooling, maintenance of heat sink and maintenance of containment integrity. Task performance measures are based on the task analysis. Task analysis is to determine the tasks required and how operators are performed. In this paper, task analysis is done with ideal path for an accident completed by experts and Emergency Operation Procedure (EOP). However, most literatures related to operators' performance have been using one of these measures and there is no research to find out the relationships between two measures. In this paper, the relationships between functional performance measure and task performance measure are investigated using experiments. Shortly

  16. The relationships between common measures of glucose meter performance.

    Science.gov (United States)

    Wilmoth, Daniel R

    2012-09-01

    Glucose meter performance is commonly measured in several different ways, including the relative bias and coefficient of variation (CV), the total error, the mean absolute relative deviation (MARD), and the size of the interval around the reference value that would be necessary to contain a meter measurement at a specified probability. This fourth measure is commonly expressed as a proportion of the reference value and will be referred to as the necessary relative deviation. A deeper understanding of the relationships between these measures may aid health care providers, patients, and regulators in comparing meter performances when different measures are used. The relationships between common measures of glucose meter performance were derived mathematically. Equations are presented for calculating the total error, MARD, and necessary relative deviation using the reference value, relative bias, and CV when glucose meter measurements are normally distributed. When measurements are also unbiased, the CV, total error, MARD, and necessary relative deviation are linearly related and are therefore equivalent measures of meter performance. The relative bias and CV provide more information about meter performance than the other measures considered but may be difficult for some audiences to interpret. Reporting meter performance in multiple ways may facilitate the informed selection of blood glucose meters. © 2012 Diabetes Technology Society.

  17. MEASURING PERFORMANCE IN ORGANIZATIONS FROM MULTI-DIMENSIONAL PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    ȘTEFĂNESCU CRISTIAN

    2017-08-01

    Full Text Available In turbulent financial and economic present conditions a major challenge for the general management of organizations and in particular for the strategic human resources management is to establish a clear, coherent and consistent framework in terms of measuring organizational performance and economic efficiency. This paper aims to conduct an exploratory research of literature concerning measuring organizational performance. Based on the results of research the paper proposes a multi-dimensional model for measuring organizational performance providing a mechanism that will allow quantification of performance based on selected criteria. The model will attempt to eliminate inconsistencies and incongruities of organizational effectiveness models developed by specialists from organization theory area, performance measurement models developed by specialists from accounting management area and models of measuring the efficiency and effectiveness developed by specialists from strategic management and entrepreneurship areas.

  18. Measures of Strategic Alliance Performance, Classified and Assessed

    DEFF Research Database (Denmark)

    Christoffersen, Jeppe; Plenborg, Thomas; Robson, Matthew J.

    2014-01-01

    Over the last three decades, strategic alliance performance has been an important research topic within the international business and management fields. Researchers have investigated a number of factors explaining performance but often find diverging results. Scholars have suggested that one...... reason may be that different performance measures are used as the dependent variable. But which differences exist and how can they matter? Against this backdrop, the present study makes three main contributions. First, we identify dimensions that illustrate differences and similarities between...... performance measures and provide a simple yet comprehensive classification of the different performance measures used in 167 empirical studies in the literature. Second, we suggest how differences in performance measures may influence construct validity under different circumstances. Third, we show...

  19. Europeanization in VET Policy as a Process of Reshaping the Educational Space

    Directory of Open Access Journals (Sweden)

    Krista Loogma

    2016-04-01

    Full Text Available The EU represents a transforming educational space, where national and supranational boundaries in educational governance are becoming blurred. The EU has become an  important actor in educational governance and an important arena for policy learning and transfer. This paper explores how the process of reshaping the educational space manifests itself in the process of the Europeanization of VET policy in the case of Estonia. In Estonia, this process was followed by the growth of executive VET institutions and has developed from rather uncritical initial policy transfer to more active learning from the EU, although conformism can still be seen in cases of the introduction of standardizing policy tools.

  20. Performance Measurement without Benchmarks: An Examination of Mutual Fund Returns.

    OpenAIRE

    Grinblatt, Mark; Titman, Sheridan

    1993-01-01

    This article introduces a new measure of portfolio performance and applies it to study the performance of a large sample of mutual funds. In contrast to previous studies of mutual fund performance, the measure used in this study employs portfolio holdings and does not require the use of a benchmark portfolio. It finds that the portfolio choices of mutual fund managers, particularly those that managed aggressive growth funds, earned significantly positive risk-adjusted returns in the 1976-85 p...

  1. An Examination of Organizatinal Performance Measurement System Utilization

    OpenAIRE

    DeBusk, Gerald Kenneth

    2003-01-01

    This dissertation provides results of three studies, which examine the utilization of organizational performance measurement systems. Evidence gathered in the first study provides insight into the number of perspectives or components found in the evaluation of an organization's performance and the relative weight placed on those components. The evidence suggests that the number of performance measurement components and their relative composition is situational. Components depend heavily on th...

  2. A framework to improve performance measurement in engineering projects

    OpenAIRE

    Zheng , Li; Baron , Claude; Esteban , Philippe; Xue , Rui; Zhang , Qiang

    2017-01-01

    International audience; A wide range of methods and good practices have been developed for the measurement of projects performance. They help project managers to effectively monitor the project progress and evaluate results. However, from a literature review, we noticed several remaining critical issues in measuring projects performance, such as an unbalanced development of Key Performance Indicators types between lagging and leading indicators. On the other hand, systems engineering measurem...

  3. Performance Measurement, Expectancy and Agency Theory: An Experimental Study

    OpenAIRE

    Randolph Sloof; Mirjam van Praag

    2007-01-01

    Theoretical analyses of (optimal) performance measures are typically performed within the realm of the linear agency model. An important implication of this model is that, for a given compensation scheme, the agent's optimal effort choice is unrelated to the amount of noise in the performance measure. In contrast, expectancy theory as developed by psychologists predicts that effort levels are increasing in the signal-to-noise ratio. We conduct a real effort laboratory experiment to assess the...

  4. Thermal performance measurements on ATLAS-SCT KB forward modules

    CERN Document Server

    Donegà, M; D'Onofrio, M; Ferrère, D; Hirt, C; Ikegami, Y; Kohriki, T; Kondo, T; Lindsay, S; Mangin-Brinet, M; Niinikoski, T O; Pernegger, H; Perrin, E; Taylor, G; Terada, S; Unno, Y; Wallny, R; Weber, M

    2003-01-01

    The thermal design of the KB module is presented. A Finite Elements Analysis (FEA) has been used to finalize the module design. The thermal performance of an outer irradiated KB module has been measured at different cooling conditions. The thermal runaway of the module has been measured. The FEA model has been compared with the measurements and has been used to predict the thermal performance in a realistic SCT scenario.

  5. Balanced Scorecard Based Performance Measurement & Strategic Management System

    OpenAIRE

    Permatasari, Paulina

    2006-01-01

    Developing strategy and performance measurement are an integral part of management control system. Making strategic decision about planning and controlling require information regarding how different subunits in organization work. To be effective, performance measurement, both financial and non-financial must motivate manager and employees at different levels to force goal accomplishment and organization strategic. An organization's measurement system strongly affects the behavior of people b...

  6. Performance measurement in healthcare: part II--state of the science findings by stage of the performance measurement process.

    Science.gov (United States)

    Adair, Carol E; Simpson, Elizabeth; Casebeer, Ann L; Birdsell, Judith M; Hayden, Katharine A; Lewis, Steven

    2006-07-01

    This paper summarizes findings of a comprehensive, systematic review of the peer-reviewed and grey literature on performance measurement according to each stage of the performance measurement process--conceptualization, selection and development, data collection, and reporting and use. It also outlines implications for practice. Six hundred sixty-four articles about organizational performance measurement from the health and business literature were reviewed after systematic searches of the literature, multi-rater relevancy ratings, citation checks and expert author nominations. Key themes were extracted and summarized from the most highly rated papers for each performance measurement stage. Despite a virtually universal consensus on the potential benefits of performance measurement, little evidence currently exists to guide practice in healthcare. Issues in conceptualizing systems include strategic alignment and scope. There are debates on the criteria for selecting measures and on the types and quality of measures. Implementation of data collection and analysis systems is complex and costly, and challenges persist in reporting results, preventing unintended effects and putting findings for improvement into action. There is a need for further development and refinement of performance measures and measurement systems, with a particular focus on strategies to ensure that performance measurement leads to healthcare improvement.

  7. Performance measurement in the context of CREM and FM

    NARCIS (Netherlands)

    Riratanaphong, C.; van der Voordt, Theo; Sarasoja, AL; Jensen, PA; van der Voordt, DJM; Coenen, C

    2012-01-01

    Purpose: To discuss trends in organisational performance measurement, to identify and discuss widely used performance criteria and key performance indicators (KPIs) in general and in the fields of Facility Management (FM) and Corporate Real Estate Management (CREM), and to identify how a more

  8. Designing a performance measurement system: A case study

    NARCIS (Netherlands)

    Lohman, Clemens; Fortuin, Leonard; Wouters, Marc

    2004-01-01

    Performance measurement (PM) by means of local performance indicators (PIs) is developing into performance management at a company-wide scale. But how should PIs at various levels in the organization be incorporated into one system that can help managers, working at levels that range from

  9. Performance measurement, expectancy and agency theory: An experimental study

    NARCIS (Netherlands)

    Sloof, R.; van Praag, C.M.

    2005-01-01

    Theoretical analyses of (optimal) performance measures are typically performed within the realm of the linear agency model. An important implication of this model is that, for a given compensation scheme, the agent's optimal effort choice is unrelated to the amount of noise in the performance

  10. Designing a performance measurement system : a case study

    NARCIS (Netherlands)

    Lohman, C.T.M.; Fortuin, L.; Wouters, M.J.F.

    2004-01-01

    Performance measurement (PM) by means of local performance indicators (PIs) is developing into performance management at a company-wide scale. But how should PIs at various levels in the organization be incorporated into one system that can help managers, working at levels that range from

  11. Performance-Based Measurement: Action for Organizations and HPT Accountability

    Science.gov (United States)

    Larbi-Apau, Josephine A.; Moseley, James L.

    2010-01-01

    Basic measurements and applications of six selected general but critical operational performance-based indicators--effectiveness, efficiency, productivity, profitability, return on investment, and benefit-cost ratio--are presented. With each measurement, goals and potential impact are explored. Errors, risks, limitations to measurements, and a…

  12. Strategy Archetypes Adopted by Icelandic Companies, Their Fit with Performance Measures and Effects on Financial Performance

    DEFF Research Database (Denmark)

    Rikhardsson, Pall; Sigurjonsson, Olaf; Arnardottir, Audur Arna

    Past research seems to suggest that companies adopting certain strategies favor certain sets of performance measures. That is to say companies using entrepreneurial focused strategies favor non-financial measures or a balanced mix of financial and non-financial measures. Companies adopting reactive...... or operational strategies seem to favor financial measures and are less likely to use non-financial measures. We take this research further by focusing not only on the link between strategy types and performance measures but also on what specific performance measures are used in connection to which strategies....... Furthermore, we examine the link between the strategies adopted, the performance measures favored and the financial performance of the companies. The empirical data collection was carried out in winter 2013 with a population of the 300 largest companies in Iceland. The survey was sent to the CFO...

  13. Performance Measure as Feedback Variable in Image Processing

    Directory of Open Access Journals (Sweden)

    Ristić Danijela

    2006-01-01

    Full Text Available This paper extends the view of image processing performance measure presenting the use of this measure as an actual value in a feedback structure. The idea behind is that the control loop, which is built in that way, drives the actual feedback value to a given set point. Since the performance measure depends explicitly on the application, the inclusion of feedback structures and choice of appropriate feedback variables are presented on example of optical character recognition in industrial application. Metrics for quantification of performance at different image processing levels are discussed. The issues that those metrics should address from both image processing and control point of view are considered. The performance measures of individual processing algorithms that form a character recognition system are determined with respect to the overall system performance.

  14. GRAPH THEORY APPROACH TO QUANTIFY UNCERTAINTY OF PERFORMANCE MEASURES

    Directory of Open Access Journals (Sweden)

    Sérgio D. Sousa

    2015-03-01

    Full Text Available In this work, the performance measurement process is studied to quantify the uncertainty induced in the resulting performance measure (PM. To that end, the causes of uncertainty are identified, analysing the activities undertaken in the three following stages of the performance measurement process: design and implementation, data collection and record, and determination and analysis. A quantitative methodology based on graph theory and on the sources of uncertainty of the performance measurement process is used to calculate an uncertainty index to evaluate the level of uncertainty of a given PM or (key performance indicator. An application example is presented. The quantification of PM uncertainty could contribute to better represent the risk associated with a given decision and also to improve the PM to increase its precision and reliability.

  15. Multi-instance dictionary learning via multivariate performance measure optimization

    KAUST Repository

    Wang, Jim Jing-Yan

    2016-12-29

    The multi-instance dictionary plays a critical role in multi-instance data representation. Meanwhile, different multi-instance learning applications are evaluated by specific multivariate performance measures. For example, multi-instance ranking reports the precision and recall. It is not difficult to see that to obtain different optimal performance measures, different dictionaries are needed. This observation motives us to learn performance-optimal dictionaries for this problem. In this paper, we propose a novel joint framework for learning the multi-instance dictionary and the classifier to optimize a given multivariate performance measure, such as the F1 score and precision at rank k. We propose to represent the bags as bag-level features via the bag-instance similarity, and learn a classifier in the bag-level feature space to optimize the given performance measure. We propose to minimize the upper bound of a multivariate loss corresponding to the performance measure, the complexity of the classifier, and the complexity of the dictionary, simultaneously, with regard to both the dictionary and the classifier parameters. In this way, the dictionary learning is regularized by the performance optimization, and a performance-optimal dictionary is obtained. We develop an iterative algorithm to solve this minimization problem efficiently using a cutting-plane algorithm and a coordinate descent method. Experiments on multi-instance benchmark data sets show its advantage over both traditional multi-instance learning and performance optimization methods.

  16. Multi-instance dictionary learning via multivariate performance measure optimization

    KAUST Repository

    Wang, Jim Jing-Yan; Tsang, Ivor Wai-Hung; Cui, Xuefeng; Lu, Zhiwu; Gao, Xin

    2016-01-01

    The multi-instance dictionary plays a critical role in multi-instance data representation. Meanwhile, different multi-instance learning applications are evaluated by specific multivariate performance measures. For example, multi-instance ranking reports the precision and recall. It is not difficult to see that to obtain different optimal performance measures, different dictionaries are needed. This observation motives us to learn performance-optimal dictionaries for this problem. In this paper, we propose a novel joint framework for learning the multi-instance dictionary and the classifier to optimize a given multivariate performance measure, such as the F1 score and precision at rank k. We propose to represent the bags as bag-level features via the bag-instance similarity, and learn a classifier in the bag-level feature space to optimize the given performance measure. We propose to minimize the upper bound of a multivariate loss corresponding to the performance measure, the complexity of the classifier, and the complexity of the dictionary, simultaneously, with regard to both the dictionary and the classifier parameters. In this way, the dictionary learning is regularized by the performance optimization, and a performance-optimal dictionary is obtained. We develop an iterative algorithm to solve this minimization problem efficiently using a cutting-plane algorithm and a coordinate descent method. Experiments on multi-instance benchmark data sets show its advantage over both traditional multi-instance learning and performance optimization methods.

  17. Governance Dynamics and the Application of the Multilevel Governance Approach in Vocational Education and Training (VET) in the European Neighbourhood Countries: The Case of the ENPI South Region

    Science.gov (United States)

    Galvin Arribas, J. Manuel

    2016-01-01

    This article analyses moves towards good multilevel governance approaches in Vocational Education and Training (VET) as an effective way to improve VET policy making in transition and developing countries, focusing on the Southern Neighbourhood of the EU (ENPI South). The centralised approaches in public administration and to VET governance still…

  18. From mission to measures: performance measure development for a Teen Pregnancy Prevention Program.

    Science.gov (United States)

    Farb, Amy Feldman; Burrus, Barri; Wallace, Ina F; Wilson, Ellen K; Peele, John E

    2014-03-01

    The Office of Adolescent Health (OAH) sought to create a comprehensive set of performance measures to capture the performance of the Teen Pregnancy Prevention (TPP) program. This performance measurement system needed to provide measures that could be used internally (by both OAH and the TPP grantees) for management and program improvement as well as externally to communicate the program's progress to other interested stakeholders and Congress. This article describes the selected measures and outlines the considerations behind the TPP measurement development process. Issues faced, challenges encountered, and lessons learned have broad applicability for other federal agencies and, specifically, for TPP programs interested in assessing their own performance and progress. Published by Elsevier Inc.

  19. Academic writing performance measured for research and instruction

    NARCIS (Netherlands)

    Firssova, Olga

    2012-01-01

    Firssova, O. (2011, January 19). Academic writing performance measured for research and instruction. Presentation at the ICO Course Domain specific research on learning and instruction: theories, methodology and curricular innovations, Utrecht, The Netherlands: Interuniversitair Centrum voor

  20. Academic writing performance measured for research and instruction

    NARCIS (Netherlands)

    Firssova, Olga

    2012-01-01

    Firssova, O. (2012, 19 January). Academic writing performance measured for research and instruction. Presentation given at the ICO Masterclass, Theme Domain-Specific Instruction, January 19-February 10, Utrecht, The Netherlands.

  1. Establishing and integrating performance measures : a TPCB peer exchange

    Science.gov (United States)

    2015-08-31

    This report highlights key recommendations and noteworthy practices identified at Establishing and Integrating Performance Measures Peer Exchange held on April 27-28, 2015 in Dimondale, Michigan and via video teleconference. This event was spon...

  2. Decentralization, Interdependence and Performance Measurement System Design : Sequences and Priorities

    NARCIS (Netherlands)

    Abernethy, M.; Bouwens, J.F.M.G.; van Lent, L.A.G.M.

    2001-01-01

    We investigate the determinants of decentralization and performance measurement choices in multidivisional firms.We extend the research on the economics of organizational design choices by examining the impact of two important determinants of those choices, namely, subunit interdependencies and

  3. Issues with performance measures for dynamic multi-objective optimisation

    CSIR Research Space (South Africa)

    Helbig, M

    2013-06-01

    Full Text Available Symposium on Computational Intelligence in Dynamic and Uncertain Environments (CIDUE), Mexico, 20-23 June 2013 Issues with Performance Measures for Dynamic Multi-objective Optimisation Mard´e Helbig CSIR: Meraka Institute Brummeria, South Africa...

  4. design, construction and measured performance of a single-stage

    African Journals Online (AJOL)

    2012-11-03

    Nov 3, 2012 ... Abstract. The design philosophy, construction and measured performances of a single stage, single entry centrifugal pump .... the tachometer spindle to be held against a recess in the motor shaft. The constructed centrifugal ...

  5. Growth performance and certain body measurements of ostrich ...

    African Journals Online (AJOL)

    Growth performance and certain body measurements of ostrich chicks as affected by dietary protein levels during 2–9 weeks of age. Kh M Mahrose, AI Attia, IE Ismail, DE Abou-Kassem, ME Abd El-Hack ...

  6. Have VET Reforms Resulted in Improvements in Quality? Illustrations from the Alcohol and Other Drugs Sector

    Science.gov (United States)

    Roche, Ann; Kostadinov, Victoria; White, Michael

    2014-01-01

    Australian vocational education and training (VET) has undergone major reforms since the 1990s, including the introduction of competency based training (CBT) and the "streamlining" of qualifications. This paper examines the impact of these reforms, using the alcohol and other drugs sector as a case illustration. A survey of alcohol and…

  7. Gender Policies Meet VET Practices--The Case of Health and Social Care in Norway

    Science.gov (United States)

    Høst, Håkon; Seland, Idunn; Skålholt, Asgeir

    2015-01-01

    Could the labour market gender balance be improved by introducing new types of apprenticeship-trained workers? This article investigates what happened in the wake of the Norwegian VET programme for health and social care, a new approach introduced via the 1994 educational reform. By upgrading this traditionally female-dominated area of education,…

  8. The Role of VET in Workforce Development: A Story of Conflicting Expectations. Research Report

    Science.gov (United States)

    Bretherton, Tanya

    2011-01-01

    This is the final report from a three-year program of research investigating the role of vocational education and training (VET) in workforce development. The research focuses on meat processing and child care, both of which are characterised by low-skill entry points to the labour market. The author pulls together the key themes emerging from the…

  9. The Conceptual Model of Future Teachers Training to Dual Education in VET (Vocational Education & Training)

    Science.gov (United States)

    Zholdasbekova, Saule; Nurzhanbayeva, Zhanat; Karatayev, Galymzhan; Akhmet, Laura Smatullaevna; Anarmetov, Bahitzhan

    2016-01-01

    In the article the author presents the theoretical understanding of research problems of training of the future teachers-organizers of the dual training system in vocational education & training (VET) in the conditions of the credit technology of education. The author's vision of way to solve the problem is discussed in the description of the…

  10. Missing Things and Methodological Swerves: Unsettling the It-Ness of VET

    Science.gov (United States)

    Shore, Sue; Butler, Elaine

    2012-01-01

    This paper argues for approaches to research methodologies that interrupt the machinic metaphors and relationships for living circulating in so much VET research. Using the schematic of "cyborg as a figuration" and Wilson's (2009) four epistemological interventions (witnessing, situating, diffracting, acquiring) the authors practice a form of…

  11. VET Retention in Remote Aboriginal and Torres Strait Islander Communities. Good Practice Guide

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2017

    2017-01-01

    This good practice guide is based on the research project "Enhancing training advantage for remote Aboriginal and Torres Strait Islander learners" by John Guenther et al. on behalf of Ninti One Limited. The project examines five unique and successful vocational education and training (VET) programs in remote areas and identifies how…

  12. Educational Leadership in Australian Private VET Organisations: How Is It Understood and Enacted?

    Science.gov (United States)

    Simons, Michele; Harris, Roger

    2014-01-01

    Ongoing reform in vocational education and training (VET) has placed significant pressure on leaders in private training organisations in terms of striking an 'appropriate' balance between educational and business imperatives. This paper draws on data from 34 interviews with leaders from 16 private registered training organisations in Australia to…

  13. Approaches for Sustaining and Building Management and Leadership Capability in VET Providers

    Science.gov (United States)

    Callan, Victor; Mitchell, John; Clayton, Berwyn; Smith, Larry

    2007-01-01

    This study examines the existing and potential strategies for sustaining and building greater levels of management and leadership capability in training organisations. The research report is one of the products of a nationally based research consortium: Supporting vocational education and training (VET) providers in building capability for the…

  14. AVETMISS: The Standard for VET Financial Data. Release 1.7. Updated

    Science.gov (United States)

    National Centre for Vocational Education Research (NCVER), 2009

    2009-01-01

    The Standard for Vocational Education and Training (VET) financial data offers a nationally consistent standard for the collection, reporting and analysis of the public vocational education and training system information throughout Australia. It forms part of the Australian Vocational Education and Training Management Information Statistical…

  15. Why Returning to VET? Results of a Qualitative Comparative Study about English and German Car Mechatronics

    Science.gov (United States)

    Gericke, Erika

    2017-01-01

    Educational choices, especially the influence of class on these choices have been a subject of lively international debate. However, thus far, there has been little international and comparative research with respect to vocational and education training (VET) decision making from a subject-oriented perspective. This paper considers…

  16. Emerging Partnership Practices in VET Provision in the Senior Years of Schooling in Australia

    Science.gov (United States)

    Klatt, Gosia; Angelico, Teresa; Polesel, John

    2018-01-01

    School partnerships support the effective provision of Vocational Education and Training (VET) in the senior years of secondary schooling, to a varying degree, in most OECD nations. However, the nature and quality of these partnerships vary considerably from school to school and, indeed, from nation to nation (see Murray and Polesel, "Eur J…

  17. 78 FR 31999 - 30-Day Notice of Proposed Information Collection: Iran Democracy Program Grants Vetting

    Science.gov (United States)

    2013-05-28

    ... DEPARTMENT OF STATE [Public Notice 8337] 30-Day Notice of Proposed Information Collection: Iran Democracy Program Grants Vetting ACTION: Notice of request for public comment and submission to OMB of proposed collection of information. SUMMARY: The Department of State has submitted the information...

  18. 78 FR 15798 - 60-Day Notice of Proposed Information Collection: Iran Democracy Program Grants Vetting

    Science.gov (United States)

    2013-03-12

    ... DEPARTMENT OF STATE [Public Notice 8218] 60-Day Notice of Proposed Information Collection: Iran Democracy Program Grants Vetting ACTION: Notice of request for public comment. SUMMARY: The Department of State is seeking Office of Management and Budget (OMB) approval for the information collection described...

  19. VET in Schools: The Adoption of National Training Packages in a Secondary School Setting.

    Science.gov (United States)

    Dixon, Kathryn; Pelliccione, Lina

    2003-01-01

    Vocational education and training (VET) teachers in Australian secondary schools (n=11) identified the following influences on adoption of National Training Packages: ways in which teachers construct meaning for innovations, organizational culture, infrastructure, leadership, and policy. More time, training, and a coordinator helped embed and…

  20. Work, Life and VET Participation amongst Lower-Paid Workers. NCVER Monograph Series 05/2011

    Science.gov (United States)

    Pocock, Barbara; Skinner, Natalie; McMahon, Catherine; Pritchard, Suzanne

    2011-01-01

    This monograph is the culmination of a three-year research program undertaken by the University of South Australia's Centre for Work+Life. It considers the barriers, support and benefit of vocational education and training (VET) for workers in the low-paid occupations (that is, those earning around $17 per hour). The research considered a wide…

  1. Implementing Human Resources Management (HRM) within Dutch VET Institutions: Examining the Fostering and Hindering Factors

    Science.gov (United States)

    Runhaar, Piety; Sanders, Karin

    2013-01-01

    Vocational Education and Training (VET) Institutions face serious challenges, like the implementation of competence-based education and upcoming teacher shortages, which urge them to implement Human Resources Management policy and practices (HRM). The implementation of HRM, however, often stagnates. This paper describes a qualitative study--in…

  2. Beauty Therapy, Vet Teaching and Bio-Power: A Tale of Two Training Packages

    Science.gov (United States)

    McKenzie, Mary; Harreveld, Roberta; Blayney, William

    2018-01-01

    This paper explores the teaching of beauty therapy in the Australian Vocational Education and Training (VET) sector. It uses the theoretical concept of bio-power to examine how the body is compliant with intimate treatments in the name of beauty. Bio-power makes visible the anatomical and biological transformation and re-formation of the human…

  3. The "Duality" of VET in Austria: Institutional Competition between School and Apprenticeship

    Science.gov (United States)

    Lassnigg, Lorenz

    2011-01-01

    This article analyses the structure and development of Austrian apprenticeship in the context of the country's wider vocational education and training (VET) system. In doing so, it draws on official data and survey results as well as the available, related literature on historical institutionalism. It begins with an analysis of the basic structure…

  4. The Role of an Academic Development Unit in Supporting Institutional VET Learning and Teaching Change Management

    Science.gov (United States)

    Fotinatos, Nina

    2016-01-01

    The aim of this paper is to examine the role and impact of a central academic development unit (ADU) within an institutional strategic and operational change management project. The primary goal of this project was to improve vocational education and training (VET) learning and teaching practice in an Australian dual-sector regional university.…

  5. E-Assessment: Challenges to the Legitimacy of VET Practitioners and Auditors

    Science.gov (United States)

    Callan, Victor J.; Johnston, Margaret A.; Clayton, Berwyn; Poulsen, Alison L.

    2016-01-01

    This research examines what practitioners in vocational education and training (VET) organisations and external auditors judge to be the key issues in the current and future use of e-assessment. Applying the framework of legitimacy theory, the study examined the tensions around the use and growth of e-assessment in training organisations, and…

  6. Procurement performance measurement system in the health care industry.

    Science.gov (United States)

    Kumar, Arun; Ozdamar, Linet; Ng, Chai Peng

    2005-01-01

    The rising operating cost of providing healthcare is of concern to health care providers. As such, measurement of procurement performance will enable competitive advantage and provide a framework for continuous improvement. The objective of this paper is to develop a procurement performance measurement system. The paper reviews the existing literature in procurement performance measurement to identify the key areas of purchasing performance. By studying the three components in the supply chain collectively with the resources, procedures and output, a model is been developed. Additionally, a balanced scorecard is proposed by establishing a set of generic measures and six perspectives. A case study conducted at the Singapore Hospital applies the conceptual model to describe the purchasing department and the activities within and outside the department. The results indicate that the material management department has already made a good start in measuring the procurement process through the implementation of the balanced scorecard. There are many data that are collected but not properly collated and utilized. Areas lacking measurement include cycle time of delivery, order processing time, effectiveness, efficiency and reliability. Though a lot of hard work was involved, the advantages of establishing a measurement system outweigh the costs and efforts involved in its implementation. Results of balanced scorecard measurements provide decision-makers with critical information on efficiency and effectiveness of the purchasing department's work. The measurement model developed could be used for any hospital procurement system.

  7. The effectiveness of performance measuring in Slovenian public libraries

    Directory of Open Access Journals (Sweden)

    Silva Novljan

    1997-01-01

    Full Text Available The article describes methods of performance measuring in Slovenian public libraries, and calls attention to the problems attached to it. The argued presumption is that the performance measuring carried out on the state level, is not always a sufficient and adequate foundation for plarming of the developmenl and functioning of an individual library which has to cater for the needs and wishes of the population in a certain area.

  8. Performance measurement of electricity suppliers using PROMETHEE and balance scorecard

    OpenAIRE

    Mona Osati; Manouchehr Omidvari

    2016-01-01

    Performance measurement in energy industry plays an important role on increasing the productivity. Electricity is also among the most essential components of energy in mega cities like Tehran. The lack of a good service in this city may result unpleasant consequences on most civilians who live in this city. This paper presents an empirical investigation to measure the performance of six major electricity contractors in city of Tehran, Iran. The study implements grey numbers to handle any unce...

  9. Holistic Performance Measurement to Achieve Sustainable Competitive Advantage

    OpenAIRE

    Keni Keni

    2013-01-01

    In the past, companies used balanced scorecard to measure its performance. Now, balanced scorecard as a performance measurement tool is no longer sufficient because business has been affected by changes to the natural environment and developing social expectations. In order to achieve sustainable competitive advantage, companies are beginning to address the risks and opportunities associated with these changes in their longer-term business planning. To turn risks into opportunities, companies...

  10. From Performance Measurement to Strategic Management Model: Balanced Scorecard

    Directory of Open Access Journals (Sweden)

    Cihat Savsar

    2015-03-01

    Full Text Available Abstract: In Today’s competitive markets, one of the main conditions of the surviving of enterprises is the necessity to have effective performance management systems. Decisions must be taken by the management according to the performance of assets. In the transition from industrial society to information society, the presence of business structures have changed and the values of non-financial assets have increased in this period. So some systems have emerged based on intangible assets and to measure them instead of tangible assets and their measurements. With economic and technological development multi-dimensional evaluation in the business couldn’t be sufficient.  Performance evaluation methods can be applied in business with an integrated approach by its accordance with business strategy, linking to reward system and cause effects link established between performance measures. Balanced scorecard is one of the commonly used in measurement methods. While it was used for the first time in 1992 as a performance measurement tool today it has been used as a strategic management model besides its conventional uses. BSC contains customer perspective, internal perspective and learning and growth perspective besides financial perspective. Learning and growth perspective is determinant of other perspectives. In order to achieve the objectives set out in the financial perspective in other dimensions that need to be accomplished, is emphasized. Establishing a causal link between performance measures and targets how to achieve specified goals with strategy maps are described.

  11. Naïveté in novel ecological interactions: lessons from theory and experimental evidence.

    Science.gov (United States)

    Carthey, Alexandra J R; Banks, Peter B

    2014-11-01

    The invasion of alien species into areas beyond their native ranges is having profound effects on ecosystems around the world. In particular, novel alien predators are causing rapid extinctions or declines in many native prey species, and these impacts are generally attributed to ecological naïveté or the failure to recognise a novel enemy and respond appropriately due to a lack of experience. Despite a large body of research concerning the recognition of alien predation risk by native prey, the literature lacks an extensive review of naïveté theory that specifically asks how naïveté between novel pairings of alien predators and native prey disrupts our classical understanding of predator-prey ecological theory. Here we critically review both classic and current theory relating to predator-prey interactions between both predators and prey with shared evolutionary histories, and those that are ecologically 'mismatched' through the outcomes of biological invasions. The review is structured around the multiple levels of naïveté framework of Banks & Dickman (2007), and concepts and examples are discussed as they relate to each stage in the process from failure to recognise a novel predator (Level 1 naïveté), through to appropriate (Level 2) and effective (Level 3) antipredator responses. We discuss the relative contributions of recognition, cue types and the implied risk of cues used by novel alien and familiar native predators, to the probability that prey will recognise a novel predator. We then cover the antipredator response types available to prey and the factors that predict whether these responses will be appropriate or effective against novel alien and familiar native predators. In general, the level of naïveté of native prey can be predicted by the degree of novelty (in terms of appearance, behaviour or habitat use) of the alien predator compared to native predators with which prey are experienced. Appearance in this sense includes cue types

  12. Chinese Middle School Teachers' Preferences Regarding Performance Evaluation Measures

    Science.gov (United States)

    Liu, Shujie; Xu, Xianxuan; Stronge, James H.

    2016-01-01

    Teacher performance evaluation currently is receiving unprecedented attention from policy makers, scholars, and practitioners worldwide. This study is one of the few studies of teacher perceptions regarding teacher performance measures that focus on China. We employed a quantitative dominant mixed research design to investigate Chinese teachers'…

  13. Performance measurement of workplace change in two different cultural contexts

    NARCIS (Netherlands)

    Riratanaphong, C.

    2014-01-01

    There is a growing need for performance management and performance measurement that not only covers all aspects of an organisation, but which can be applied to various situations in a changing internal and external environment. The changing organisational and external contexts, such as the

  14. English Value-Added Measures: Examining the Limitations of School Performance Measurement

    Science.gov (United States)

    Perry, Thomas

    2016-01-01

    Value-added "Progress" measures are to be introduced for all English schools in 2016 as "headline" measures of school performance. This move comes despite research highlighting high levels of instability in value-added measures and concerns about the omission of contextual variables in the planned measure. This article studies…

  15. Effectiveness of Human Research Protection Program Performance Measurements.

    Science.gov (United States)

    Tsan, Min-Fu; Nguyen, Yen

    2017-10-01

    We analyzed human research protection program performance metric data of all Department of Veterans Affairs research facilities obtained from 2010 to 2016. Among a total of 25 performance metrics, 21 (84%) showed improvement, four (16%) remained unchanged, and none deteriorated during the study period. The overall improvement from these 21 performance metrics was 81.1% ± 18.7% (mean ± SD), with a range of 30% to 100%. The four performance metrics that did not show improvement all had initial noncompliance/incidence rates of performance metrics that showed improvement ranged from 0.05% to 60%. However, of the 21 performance metrics that showed improvement, 10 had initial noncompliance/incidence rates of performance measurement is an effective tool in improving the performance of human research protection programs.

  16. Theory and Application of an Economic Performance Measure of Risk

    NARCIS (Netherlands)

    C. Niu (Cuizhen); X. Guo (Xu); M.J. McAleer (Michael); W.-K. Wong (Wing-Keung)

    2017-01-01

    textabstractHomm and Pigorsch (2012a) use the Aumann and Serrano index to develop a new economic performance measure (EPM), which is well known to have advantages over other measures. In this paper, we extend the theory by constructing a one-sample confidence interval of EPM, and construct

  17. Readiness to adopt a performance measurement system for ...

    African Journals Online (AJOL)

    Readiness to adopt a performance measurement system for substance abuse treatment: Findings from the Service Quality Measures initiative. ... system, findings show that the likelihood of adoption can be further increased through improved provider awareness and enhanced leadership support for this health innovation.

  18. Adding Shareholder Value through Project Performance Measurement, Monitoring & Control

    NARCIS (Netherlands)

    M.M. Akalu; J.R. Turner (Rodney)

    2002-01-01

    textabstractWe present the various views and methods of measuring and controlling project performance, and factors affecting a project. The review indicates that there is a shift in the type and understanding of factors of project success or failure. However, the presence of various measurement

  19. New methods for mobility performance measurement in wheelchair basketball

    NARCIS (Netherlands)

    van der Slikke, R.M.A.; Berger, MAM; Bregman, DJJ; Veeger, H.E.J.

    2016-01-01

    Increased professionalism in wheelchair sports demand a more precise and quantitative measure of individual wheelchair mobility performance, to allow it to be an evaluation measure of wheelchair setting or training optimization. This research describes the application of an inertial sensor based

  20. A measure for the batting performance of cricket players : research ...

    African Journals Online (AJOL)

    A single measure that can be used to assess the performance of batsmen in cricket is defined. This study shows how it can be used to rank batsmen. The batting ability of a batsman is generally measured by means of his average. His strike rate is, however, also very important and is often looked at as well. It will furthermore ...

  1. Measurement properties of performance-based measures to assess physical function in hip and knee osteoarthritis

    DEFF Research Database (Denmark)

    Dobson, F; Hinman, R S; Hall, M

    2012-01-01

    OBJECTIVES: To systematically review the measurement properties of performance-based measures to assess physical function in people with hip and/or knee osteoarthritis (OA). METHODS: Electronic searches were performed in MEDLINE, CINAHL, Embase, and PsycINFO up to the end of June 2012. Two...... investigating measurement properties of performance measures, including responsiveness and interpretability in people with hip and/or knee OA, is needed. Consensus on which combination of measures will best assess physical function in people with hip/and or knee OA is urgently required....

  2. Vets prevail online intervention reduces PTSD and depression in veterans with mild-to-moderate symptoms.

    Science.gov (United States)

    Hobfoll, Stevan E; Blais, Rebecca K; Stevens, Natalie R; Walt, Lisa; Gengler, Richard

    2016-01-01

    Despite heightened rates of depression and posttraumatic stress disorder (PTSD) among in Iraq/Afghanistan veterans, the majority of distressed veterans will not receive mental health care. Overcoming barriers to mental health services requires innovative approaches to broaden the reach of evidence-based treatment. The current study examined the efficacy and acceptability of an innovative and dynamic online cognitive-behavioral therapy intervention for PTSD and depression called Vets Prevail. A randomized clinical trial conducted between 2011 and 2013 assessed changes in PTSD and depression in veterans with mild-to-moderate distress. Veterans randomized to Vets Prevail (n = 209) were aged 34.2 ± 7.6 years, mostly male (81.3%), and nonminority (73.7%). Veterans randomized to adjustment as usual (n = 94) were aged 34.7 ± 8.9, mostly male (81.9%), and White (67.0%). Veterans completed the PTSD Checklist-Military Version and the Center for Epidemiological Studies Depression scale (10-item version) postintervention and at 12-week follow-up. Veterans in the Vets Prevail condition reported significantly greater reductions in PTSD, t(250) = 3.24, p = .001 (Mreduction = 5.51, SD = 9.63), and depression, t(252) = 4.37, p = .001 (Mreduction = 2.31, SD = 5.34), at 12-week follow-up compared with veterans in the adjustment as usual condition (PTSD Mreduction = 1.00, SD = 7.32; depression Mreduction = 0.48, SD = 4.95), with moderate effect sizes for PTSD (Cohen's d = 0.42) and depression (Cohen's d = 0.56). Exploratory analysis shows that Vets Prevail may be effective regardless of combat trauma exposure, gender, and ethnic minority status. Vets Prevail circumvents many barriers to care and effectively addresses the dire mental health needs of veterans. (c) 2015 APA, all rights reserved).

  3. Mobile Handset Performance Evaluation Using Radiation Pattern Measurements

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ødum; Pedersen, Gert Frølund

    2006-01-01

    The mean effective gain is an attractive performance measure of mobile handsets, since it incorporates both directional and polarization properties of the handset and environment. In this work the mean effective gain is computed from measured spherical radiation patterns of five different mobile...... pattern is reduced. Furthermore, the frequency dependence of the mean effective gain is investigated, and a method is proposed for reducing the required number of measurements on different frequencies....

  4. Emergency medical services key performance measurement in Asian cities.

    Science.gov (United States)

    Rahman, Nik Hisamuddin; Tanaka, Hideharu; Shin, Sang Do; Ng, Yih Yng; Piyasuwankul, Thammapad; Lin, Chih-Hao; Ong, Marcus Eng Hock

    2015-01-01

    One of the key principles in the recommended standards is that emergency medical service (EMS) providers should continuously monitor the quality and safety of their services. This requires service providers to implement performance monitoring using appropriate and relevant measures including key performance indicators. In Asia, EMS systems are at different developmental phases and maturity. This will create difficultly in benchmarking or assessing the quality of EMS performance across the region. An attempt was made to compare the EMS performance index based on the structure, process, and outcome analysis. The data was collected from the Pan-Asian Resuscitation Outcome Study (PAROS) data among few Asian cities, namely, Tokyo, Osaka, Singapore, Bangkok, Kuala Lumpur, Taipei, and Seoul. The parameters of inclusions were broadly divided into structure, process, and outcome measurements. The data was collected by the site investigators from each city and keyed into the electronic web-based data form which is secured strictly by username and passwords. Generally, there seems to be a more uniformity for EMS performance parameters among the more developed EMS systems. The major problem with the EMS agencies in the cities of developing countries like Bangkok and Kuala Lumpur is inadequate or unavailable data pertaining to EMS performance. There is non-uniformity in the EMS performance measurement across the Asian cities. This creates difficulty for EMS performance index comparison and benchmarking. Hopefully, in the future, collaborative efforts such as the PAROS networking group will further enhance the standardization in EMS performance reporting across the region.

  5. The impact of multi-criteria performance measurement on business performance improvement

    Directory of Open Access Journals (Sweden)

    Fentahun Moges Kasie

    2013-06-01

    Full Text Available Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview and observation of records. The methodology is to evaluate business performances of sampled manufacturing companies and the extent of utilization of crucial non-financial (lagging and non-financial (leading performance measures. The positive correlation between financial business performance and practice of MCPM is clearly shown using Pearson’s correlation coefficient analysis. Findings –This research paper indicates that companies which measure their performance using important financial and non-financial measures achieve better business performance. Even though certain companies are currently using non-financial measures, the researchers have learned that these financial measures were not integrated with each other, financial measures and strategic objectives. Research limitations/implications: The limitation of this paper is that the number of surveyed companies is small to make generalization and they are found in a single country. Further researches which incorporate a large number of companies from various developing nations are suggested to minimize the limitation of this research.Practical Implication: The paper shows that multi-dimensional performance measures with the inclusion of key leading indicator are essential to predict the future environment. But cost-accounting based financial measures are inadequate to do so. These are shown practically using Pearson’s correlation coefficient analysis. Originality/value: The significance of multi

  6. Utilization and acceptance of virtual patients in veterinary basic sciences - the vetVIP-project.

    Science.gov (United States)

    Kleinsorgen, Christin; Kankofer, Marta; Gradzki, Zbigniew; Mandoki, Mira; Bartha, Tibor; von Köckritz-Blickwede, Maren; Naim, Hassan Y; Beyerbach, Martin; Tipold, Andrea; Ehlers, Jan P

    2017-01-01

    Context: In medical and veterinary medical education the use of problem-based and cased-based learning has steadily increased over time. At veterinary faculties, this development has mainly been evident in the clinical phase of the veterinary education. Therefore, a consortium of teachers of biochemistry and physiology together with technical and didactical experts launched the EU-funded project "vetVIP", to create and implement veterinary virtual patients and problems for basic science instruction. In this study the implementation and utilization of virtual patients occurred at the veterinary faculties in Budapest, Hannover and Lublin. Methods: This report describes the investigation of the utilization and acceptance of students studying veterinary basic sciences using optional online learning material concurrently to regular biochemistry and physiology didactic instruction. The reaction of students towards this offer of clinical case-based learning in basic sciences was analysed using quantitative and qualitative data. Quantitative data were collected automatically within the chosen software-system CASUS as user-log-files. Responses regarding the quality of the virtual patients were obtained using an online questionnaire. Furthermore, subjective evaluation by authors was performed using a focus group discussion and an online questionnaire. Results: Implementation as well as usage and acceptance varied between the three participating locations. High approval was documented in Hannover and Lublin based upon the high proportion of voluntary students (>70%) using optional virtual patients. However, in Budapest the participation rate was below 1%. Due to utilization, students seem to prefer virtual patients and problems created in their native language and developed at their own university. In addition, the statement that assessment drives learning was supported by the observation that peak utilization was just prior to summative examinations. Conclusion: Veterinary

  7. Utilization and acceptance of virtual patients in veterinary basic sciences – the vetVIP-project

    Directory of Open Access Journals (Sweden)

    Kleinsorgen, Christin

    2017-05-01

    Full Text Available Context: In medical and veterinary medical education the use of problem-based and cased-based learning has steadily increased over time. At veterinary faculties, this development has mainly been evident in the clinical phase of the veterinary education. Therefore, a consortium of teachers of biochemistry and physiology together with technical and didactical experts launched the EU-funded project “vetVIP”, to create and implement veterinary virtual patients and problems for basic science instruction. In this study the implementation and utilization of virtual patients occurred at the veterinary faculties in Budapest, Hannover and Lublin.Methods: This report describes the investigation of the utilization and acceptance of students studying veterinary basic sciences using optional online learning material concurrently to regular biochemistry and physiology didactic instruction. The reaction of students towards this offer of clinical case-based learning in basic sciences was analysed using quantitative and qualitative data. Quantitative data were collected automatically within the chosen software-system CASUS as user-log-files. Responses regarding the quality of the virtual patients were obtained using an online questionnaire. Furthermore, subjective evaluation by authors was performed using a focus group discussion and an online questionnaire.Results: Implementation as well as usage and acceptance varied between the three participating locations. High approval was documented in Hannover and Lublin based upon the high proportion of voluntary students (>70% using optional virtual patients. However, in Budapest the participation rate was below 1%. Due to utilization, students seem to prefer virtual patients and problems created in their native language and developed at their own university. In addition, the statement that assessment drives learning was supported by the observation that peak utilization was just prior to summative examinations

  8. Alternative measure for performance of HLW geologic repository

    International Nuclear Information System (INIS)

    Joonhang, Ahn; Chambre, P.L.

    2001-01-01

    A repository performance model that can show effects of canister multiplicity and repository configuration has been developed. Masses of a radionuclide in the repository and in the far field are proposed as performance measures. Canister multiplicity has significant effects on the release of long-lived radionuclides from the repository. As more canisters are included in the same water stream, the radionuclide concentration in the stream increases, but becomes independent of the number of canisters for sufficiently many canisters. Effects of reduction of radionuclide mass in the repository on the repository performance are clearly observed if the canister multiplicity is taken into account and the mass-based measures are applied. (author)

  9. Determinants of the use of value-based performance measures for managerial performance evaluation

    NARCIS (Netherlands)

    Dekker, H.C.; Groot, T.L.C.M.; Schoute, M.; Wiersma, E.

    2012-01-01

    As value-based (VB) performance measures include firms' cost of capital, they are considered more congruent than earnings measures. Prior studies, however, find that their use for managerial performance evaluation is less extensive than their presumed benefits would suggest. We examine how the

  10. Shielding Performance Measurements of Spent Fuel Transportation Container

    Directory of Open Access Journals (Sweden)

    SUN Hong-chao

    2015-11-01

    Full Text Available The safety supervision of radioactive material transportation package has been further stressed and implemented. The shielding performance measurements of spent fuel transport container is the important content of supervision. However, some of the problems and difficulties reflected in practice need to be solved, such as the neutron dose rate on the surface of package is too difficult to measure exactly, the monitoring results are not always reliable, etc. The monitoring results using different spectrometers were compared and the simulation results of MCNP runs were considered. An improvement was provided to the shielding performance measurements technique and management of spent fuel transport.

  11. The comprehensive care project: measuring physician performance in ambulatory practice.

    Science.gov (United States)

    Holmboe, Eric S; Weng, Weifeng; Arnold, Gerald K; Kaplan, Sherrie H; Normand, Sharon-Lise; Greenfield, Sheldon; Hood, Sarah; Lipner, Rebecca S

    2010-12-01

    To investigate the feasibility, reliability, and validity of comprehensively assessing physician-level performance in ambulatory practice. Ambulatory-based general internists in 13 states participated in the assessment. We assessed physician-level performance, adjusted for patient factors, on 46 individual measures, an overall composite measure, and composite measures for chronic, acute, and preventive care. Between- versus within-physician variation was quantified by intraclass correlation coefficients (ICC). External validity was assessed by correlating performance on a certification exam. Medical records for 236 physicians were audited for seven chronic and four acute care conditions, and six age- and gender-appropriate preventive services. Performance on the individual and composite measures varied substantially within (range 5-86 percent compliance on 46 measures) and between physicians (ICC range 0.12-0.88). Reliabilities for the composite measures were robust: 0.88 for chronic care and 0.87 for preventive services. Higher certification exam scores were associated with better performance on the overall (r = 0.19; pmeasures and by sampling feasible numbers of patients for each condition. © Health Research and Educational Trust.

  12. Performance Measurement of Management System Standards Using the Balanced Scorecard

    Directory of Open Access Journals (Sweden)

    Jan Kopia

    2017-11-01

    Full Text Available Management system standards (MSS, such as ISO standards, TQM, etc. are widely-used standards adopted by millions of organizations worldwide. It is still an unclear question whether these standards are beneficial for an organization, besides the fact that they might be required or expected by law or customers. The question, whether MSS increase the efficiency, the output, or the performance of an organization is still discussed in scientific research. One reason might be that performance measurement itself is not fully understood or in constant development ranging from pure financial evaluations over intellectual capital rating to calculating of levels of environmental, social or economic expectations known as the Trible Bottom Line. The Balanced Scorecard is one possible solution for performance measurement on a strategic and operational level and therefore useful for the measurement of the influence of MSS within organizations. This study summarized current research in the field of performance measurement in the context of MSS and IMS and the use of BSC and quantitatively and qualitatively tests the usefulness of BSC in measuring the effect of MSSs using the Execution Premium. It was found that BSC is often used, that an average number of companies integrate their measurement initiatives of their MSSs into the BSC-process, and that a high integration of MSS into the BSC improves the organizational performance. This research is useful for researchers and practitioners in order to understand the benefits of the usage of the BSC in the context of MSS or Integrated Management Systems.

  13. Business process performance measurement: a structured literature review of indicators, measures and metrics.

    Science.gov (United States)

    Van Looy, Amy; Shafagatova, Aygun

    2016-01-01

    Measuring the performance of business processes has become a central issue in both academia and business, since organizations are challenged to achieve effective and efficient results. Applying performance measurement models to this purpose ensures alignment with a business strategy, which implies that the choice of performance indicators is organization-dependent. Nonetheless, such measurement models generally suffer from a lack of guidance regarding the performance indicators that exist and how they can be concretized in practice. To fill this gap, we conducted a structured literature review to find patterns or trends in the research on business process performance measurement. The study also documents an extended list of 140 process-related performance indicators in a systematic manner by further categorizing them into 11 performance perspectives in order to gain a holistic view. Managers and scholars can consult the provided list to choose the indicators that are of interest to them, considering each perspective. The structured literature review concludes with avenues for further research.

  14. The (mis)Measurement of M&A Performance

    DEFF Research Database (Denmark)

    Meglio, Olimpia; Risberg, Annette

    2011-01-01

    This paper seeks to further the understanding of the variety of meanings M&A scholars attach to the label “M&A performance” by providing an alternative way to interpret the claimed inconsistency of M&A research findings. While many scholars contend that the problem stems from the multiplicity of M......&A performance measures, we believe the problem rests in trying to compare different measures as if they were measuring the same feature of the organization. Through our narrative review of empirical research we analyze factors shaping the M&A – as well as the organizational – performance measurement process....... The conclusion is that it is not possible to talk about M&A performance as if it was a universal construct....

  15. The use of performance measurement systems in the public sector: effects on performance

    NARCIS (Netherlands)

    Speklé, R.; Verbeeten, F.H.M.

    2014-01-01

    We study the use of performance measurement systems in the public sector. We hypothesize that the way in which these systems are being used affects organizational performance, and that these performance effects depend on contractibility. Contractibility encompasses clarity of goals, the ability to

  16. Workshop on system tuning, performance measurement and performance optimization of an RSX11M system

    International Nuclear Information System (INIS)

    Downward, J.G.

    1981-01-01

    Topics discussed include thrashing in an RSX11M system - what to do; using solid state disk emulators as the swapping device - performance improvement, performance measurement techniques; capacity planning; bis buffering; and DECNET-11M optimization - performance that can be expected for real environments

  17. Using Radiation Pattern Measurements for Mobile Handset Performance Evaluation

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ødum; Pedersen, Gert Frølund

    2005-01-01

    The mean effective gain (MEG) is an attractive performance measure of mobile handsets, since it incorporates both directional and polarization properties of the handset and environment. In this work the MEG is computed from measured spherical radiation patterns of five different mobile handsets...... values obtained for different orientations of the handsets in the environments. For practical measurements it is important to minimize the measurement time. The paper includes a study of the variation in MEG when the number of samples in the spherical radiation pattern is reduced. Furthermore...

  18. The Development of NOAA Education Common Outcome Performance Measures (Invited)

    Science.gov (United States)

    Baek, J.

    2013-12-01

    The National Oceanic and Atmospheric Administration (NOAA) Education Council has embarked on an ambitious Monitoring and Evaluation (M&E) project that will allow it to assess education program outcomes and impacts across the agency, line offices, and programs. The purpose of this internal effort is to link outcome measures to program efforts and to evaluate the success of the agency's education programs in meeting the strategic goals. Using an outcome-based evaluation approach, the NOAA Education Council is developing two sets of common outcome performance measures, environmental stewardship and professional development. This presentation will examine the benefits and tradeoffs of common outcome performance measures that collect program results across a portfolio of education programs focused on common outcomes. Common outcome performance measures have a few benefits to our agency and to the climate education field at large. The primary benefit is shared understanding, which comes from our process for writing common outcome performance measures. Without a shared and agreed upon set of definitions for the measure of an outcome, the reported results may not be measuring the same things and would incorrectly indicate levels of performance. Therefore, our writing process relies on a commitment to developing a shared set of definitions based on consensus. We hope that by taking the time to debate and coming to agreement across a diverse set of programs, the strength of our common measures can indicate real progress towards outcomes we care about. An additional benefit is that these common measures can be adopted and adapted by other agencies and organizations that share similar theories of change. The measures are not without their drawbacks, and we do make tradeoffs as part of our process in order to continue making progress. We know that any measure is necessarily a narrow slice of performance. A slice that may not best represent the unique and remarkable contribution

  19. Performance measurement for ambulatory care: moving towards a new agenda.

    Science.gov (United States)

    Roski, J; Gregory, R

    2001-12-01

    Despite a shift in care delivery from inpatient to ambulatory care, performance measurement efforts for the different levels in ambulatory care settings such as individual physicians, individual clinics and physician organizations have not been widely instituted in the United States (U.S.). The Health Plan Employer Data and Information Set (HEDIS), the most widely used performance measurement set in the U.S., includes a number of measures that evaluate preventive and chronic care provided in ambulatory care facilities. While HEDIS has made important contributions to the tracking of ambulatory care quality, it is becoming increasingly apparent that the measurement set could be improved by providing quality of care information at the levels of greatest interest to consumers and purchasers of care, namely for individual physicians, clinics and physician organizations. This article focuses on the improvement opportunities for quality performance measurement systems in ambulatory care. Specific challenges to creating a sustainable performance measurement system at the level of physician organizations, such as defining the purpose of the system, the accountability logic, information and reporting needs and mechanisms for sustainable implementation, are discussed.

  20. Measuring individual work performance: identifying and selecting indicators.

    Science.gov (United States)

    Koopmans, Linda; Bernaards, Claire M; Hildebrandt, Vincent H; de Vet, Henrica C W; van der Beek, Allard J

    2014-01-01

    Theoretically, individual work performance (IWP) can be divided into four dimensions: task performance, contextual performance, adaptive performance, and counterproductive work behavior. However, there is no consensus on the indicators used to measure these dimensions. This study was designed to (1) identify indicators for each dimension, (2) select the most relevant indicators, and (3) determine the relative weight of each dimension in ratings of work performance. IWP indicators were identified from multiple research disciplines, via literature, existing questionnaires, and expert interviews. Subsequently, experts selected the most relevant indicators per dimension and scored the relative weight of each dimension in ratings of IWP. In total, 128 unique indicators were identified. Twenty-three of these indicators were selected by experts as most relevant for measuring IWP. Task performance determined 36% of the work performance rating, while the other three dimensions respectively determined 22%, 20% and 21% of the rating. Notable consensus was found on relevant indicators of IWP, reducing the number from 128 to 23 relevant indicators. This provides an important step towards the development of a standardized, generic and short measurement instrument for assessing IWP.

  1. Performance measurements at the fast flux test facility

    International Nuclear Information System (INIS)

    Baumhardt, R.J.; Newland, D.J.; Praetorius, P.R.

    1987-01-01

    In 1984, Fast Flux Test Facility (FFTF) management recognized the need to develop a measurement system that would quantify the operational performance of the FFTF and the human resources needed to operate it. Driven by declining budgets and the need to safely manage a manpower rampdown at FFTF, an early warning system was developed. Although the initiating event for the early warning system was the need to safely manage a manpower rampdown, many related uses have evolved. The initial desired objective for the FFTF performance measurements was to ensure safety and control of key performance trends. However, the early warning system has provided a more quantitative, supportable basis upon which to make decisions. From this initial narrow focus, efforts in the FFTF plant and supporting organizations are leading to measurement of and, subsequently, improvements in productivity. Pilot projects utilizing statistical process control have started with longer range productivity improvement

  2. In situ performance curves measurements of large pumps

    International Nuclear Information System (INIS)

    Anton, A

    2010-01-01

    The complex energetic system on the river Lotru in Romania comprises of a series of lakes and pumping stations and a major hydroelectric power plant: Lotru-Ciunget. All the efforts have been oriented towards the maintenance of the Pelton turbines and very little attention has been directed to the pumps. In the system, there are three large pumping stations and only in the last 5 years, the pump performances have become a concern. The performances where determined using portable ultrasonic flow meters, a Yates meter, precision manometers and appropriate electrical equipment for power measurement (Power Analiser - NORMA D4000 LEM). The measurements are not supposed to interfere with the normal operation so only a limited number of tests could be performed. Based on those tests, portions of the test curves have been measured and represented in specific diagrams.

  3. In situ performance curves measurements of large pumps

    Science.gov (United States)

    Anton, A.

    2010-08-01

    The complex energetic system on the river Lotru in Romania comprises of a series of lakes and pumping stations and a major hydroelectric power plant: Lotru-Ciunget. All the efforts have been oriented towards the maintenance of the Pelton turbines and very little attention has been directed to the pumps. In the system, there are three large pumping stations and only in the last 5 years, the pump performances have become a concern. The performances where determined using portable ultrasonic flow meters, a Yates meter, precision manometers and appropriate electrical equipment for power measurement (Power Analiser - NORMA D4000 LEM). The measurements are not supposed to interfere with the normal operation so only a limited number of tests could be performed. Based on those tests, portions of the test curves have been measured and represented in specific diagrams.

  4. Business sustainability performance measurement: Eco-ratio analysis

    Directory of Open Access Journals (Sweden)

    Collins C. Ngwakwe

    2016-12-01

    Full Text Available Eco-aware customers and stakeholders are demanding for a measurement that links environmental performance with other business operations. To bridge this seemingly measurement gap, this paper suggests ‘Eco-Ratio Analysis’ and proposes an approach for conducting eco-ratio analysis. It is argued that since accounting ratios function as a tool for evaluating corporate financial viability by management and investors, eco-ratio analysis should be brought to the fore to provide a succinct measurement about the linkage between environmental performance and conventional business performance. It is hoped that this suggestion will usher in a nuance debate and approach in the teaching, research and practice of environmental management and sustainability accounting

  5. Developing a performance measurement system for public research centres

    Directory of Open Access Journals (Sweden)

    Masella, C.

    2012-01-01

    Full Text Available This study aims at developing a performance measurement system (PMS for research and development (R&D activities carried out by public research centres. Public research institutions are characterized by multiple stakeholders with different needs, and the management of R&D activities requires balancing the multiple goals of different stakeholders. This characteristic is a key issue in the process of construction of the PMS. Empirical evidence is provided by an Italian public research centre, where the researchers carried out a project aimed to develop a PMS following action research principles. This project gave the possibility to researchers to interact with different stakeholders and integrate their different information needs in a comprehensive set of key performance indicators (KPIs. As a result, multidimensional framework for measuring R&D performance in a public research centre is proposed and a set of Key Performance Indicators is developed, suggesting implications for academics and practitioners.

  6. Oxide thickness measurement for monitoring fuel performance at high burnup

    International Nuclear Information System (INIS)

    Jaeger, M.A.; Van Swam, L.F.P.; Brueck-Neufeld, K.

    1991-01-01

    For on-site monitoring of the fuel performance at high burnup, Advanced Nuclear Fuels uses the linear scan eddy current method to determine the oxide thickness of irradiated Zircaloy fuel cans. Direct digital data acquisition methods are employed to collect the data on magnetic storage media. This field-proven methodology allows oxide thickness measurements and rapid interpretation of the data during the reactor outages and makes it possible to immediately reinsert the assemblies for the next operating cycle. The accuracy of the poolside measurements and data acquisition/interpretation techniques have been verified through hot cell metallographic measurements of rods previously measured in the fuel pool. The accumulated data provide a valuable database against which oxide growth models have been benchmarked and allow for effective monitoring of fuel performance. (orig.) [de

  7. Measuring business performance using indicators of ecologically sustainable organizations

    Science.gov (United States)

    Snow, Charles G., Jr.; Snow, Charles C.

    2001-02-01

    The purpose of this paper is to explore the use of ecology-based performance measures as a way of augmenting the Balanced Scorecard approach to organizational performance measurement. The Balanced Scorecard, as proposed by Kaplan and Norton, focuses on four primary dimensions; financial, internal-business-process, customer, and learning and growth perspectives. Recently, many 'green' organizational theorists have developed the concept of "Ecologically Sustainable Organizations" or ESOs, a concept rooted in open systems theory. The ESO is called upon to consider resource use and conservation as a strategy for long-term viability. This paper asserts that in order to achieve ESO status, an organization must not only measure but also reward resource conservation measures. Only by adding a fifth perspective for ecological dimensions will the entity be truly motivated toward ESO status.

  8. ROLE AND IMPORTANCE OF KEY PERFORMANCE INDICATORS MEASUREMENT

    Directory of Open Access Journals (Sweden)

    Rade Stanković

    2011-03-01

    Full Text Available Key performance indicators are financial and non financial indicators that organizations use inorder to estimate and fortify how successful they are, aiming previously established long lastinggoals. Appropriate selection of indicators that will be used for measuring is of a greatest importance.Process organization of business is necessary to be constitute in order to realize such effective andefficient system or performance measuring via KPI. Process organization also implies customerorientation and necessary flexibility in nowadays condition of global competition.Explanation of process organization, the way of KPI selection, and practical example of KPImeasuring in Toyota dealerships are presented in this paper.

  9. Performance measurement of electricity suppliers using PROMETHEE and balance scorecard

    Directory of Open Access Journals (Sweden)

    Mona Osati

    2016-06-01

    Full Text Available Performance measurement in energy industry plays an important role on increasing the productivity. Electricity is also among the most essential components of energy in mega cities like Tehran. The lack of a good service in this city may result unpleasant consequences on most civilians who live in this city. This paper presents an empirical investigation to measure the performance of six major electricity contractors in city of Tehran, Iran. The study implements grey numbers to handle any uncertainty associated with numbers. The study has also adopted four main perspectives used in balanced scorecard as part of PROMETHEE method to rank different contractors.

  10. Modelling and measurement of a moving magnet linear compressor performance

    International Nuclear Information System (INIS)

    Liang, Kun; Stone, Richard; Davies, Gareth; Dadd, Mike; Bailey, Paul

    2014-01-01

    A novel moving magnet linear compressor with clearance seals and flexure bearings has been designed and constructed. It is suitable for a refrigeration system with a compact heat exchanger, such as would be needed for CPU cooling. The performance of the compressor has been experimentally evaluated with nitrogen and a mathematical model has been developed to evaluate the performance of the linear compressor. The results from the compressor model and the measurements have been compared in terms of cylinder pressure, the ‘P–V’ loop, stroke, mass flow rate and shaft power. The cylinder pressure was not measured directly but was derived from the compressor dynamics and the motor magnetic force characteristics. The comparisons indicate that the compressor model is well validated and can be used to study the performance of this type of compressor, to help with design optimization and the identification of key parameters affecting the system transients. The electrical and thermodynamic losses were also investigated, particularly for the design point (stroke of 13 mm and pressure ratio of 3.0), since a full understanding of these can lead to an increase in compressor efficiency. - Highlights: • Model predictions of the performance of a novel moving magnet linear compressor. • Prototype linear compressor performance measurements using nitrogen. • Reconstruction of P–V loops using a model of the dynamics and electromagnetics. • Close agreement between the model and measurements for the P–V loops. • The design point motor efficiency was 74%, with potential improvements identified

  11. The Effects of Performance Measurement and Compensation on Motivation

    OpenAIRE

    Marco van Herpen; C. Mirjam van Praag; Kees Cools

    2003-01-01

    This paper analyzes empirically the relationship between pay and performance. Economic and psychological theories predict that the design and implementation of a performance measurement and compensation system affect the motivation of employees. Our survey results demonstrate a positive relationship between the perceived characteristics of the complete compensation system and extrinsic motivation. Intrinsic motivation is not affected by the design of monetary compensation, but by promotion op...

  12. Standardization of test conditions for gamma camera performance measurement

    International Nuclear Information System (INIS)

    Jordan, K.

    1982-02-01

    The way of measuring gamma camera performance is to use point sources or flood sources in air, often in combination with bar phantoms. This method has nothing in common with the use of a camera in clinical practice. Particularly in the case of low energy emitters, like Tc-99m, the influence of scattered radiation over the performance of cameras is very high. The IEC document 'Characteristics and test conditions of radionuclide imaging devices' is discussed

  13. Women in Jordanian banks and performance: Financial accounting measurement

    OpenAIRE

    Muhannad Akram Ahmad; Seif Obeid Alshbiel

    2016-01-01

    This study highlights the gender diversity issues in the banking sector taking into consideration their impact on the performance measured by profitability (ROA). As the banking sector has widely been ignored from the previous studies due to their strict system, this study empirically examined the impact of the CEO gender and board with a female director on the performance of the Jordanian commercial banks in a period from 2004 to 2013. The multiple regression analysis shows that the banks wi...

  14. Towards Effective Educational Politics through Improving the Performance Measurement System

    Directory of Open Access Journals (Sweden)

    Tuuli Reisberg

    2013-01-01

    Full Text Available Educational field is impelled to increase performance and quality, financial discipline, strategic behaviour and its goals in order to enhance “effectiveness”. As a result the incorporation of private sector management practices into the educational field is taking place. But it is important to notice that a proliferation of private managerial practices into the educational field goes along with a conflict-laden and contradictory process. Education provides an important area of implementation for techniques of performance evaluation aimed at improving the performance of public services. One of the most common conceptual frameworks in measuring organisational performance takes the form of a production function where the educational institution is seen as analogous to a company transforming inputs into outputs and outcomes through a production process. But the problems and the vagueness in determining educational system’s inputs, outputs and outcomes cause difficulties in making political decisions and that is why clear policy prescriptions have been difficult to derive. The purpose of this article is to create a discussion whether performance measurement should be a part of decision-making in educational politics. The authors debate about incorporating private sector management practices into the educational field. The debate is based on the example of evaluating the social impact in the educational field and the performance of teachers’ work in the educational system. The article consists of three parts. Firstly, the theoretical background of the performance measurement in educational field is discussed. Secondly, the important criteria for performance measurement design and political issues are argued. Thirdly, the evaluated shortcomings in Estonian educational organisations, which restrict them to be effective, are brought out. Relieving some of these shortcomings could be in authority of Estonian educational politics.

  15. Performance analysis and evaluation of direct phase measuring deflectometry

    Science.gov (United States)

    Zhao, Ping; Gao, Nan; Zhang, Zonghua; Gao, Feng; Jiang, Xiangqian

    2018-04-01

    Three-dimensional (3D) shape measurement of specular objects plays an important role in intelligent manufacturing applications. Phase measuring deflectometry (PMD)-based methods are widely used to obtain the 3D shapes of specular surfaces because they offer the advantages of a large dynamic range, high measurement accuracy, full-field and noncontact operation, and automatic data processing. To enable measurement of specular objects with discontinuous and/or isolated surfaces, a direct PMD (DPMD) method has been developed to build a direct relationship between phase and depth. In this paper, a new virtual measurement system is presented and is used to optimize the system parameters and evaluate the system's performance in DPMD applications. Four system parameters are analyzed to obtain accurate measurement results. Experiments are performed using simulated and actual data and the results confirm the effects of these four parameters on the measurement results. Researchers can therefore select suitable system parameters for actual DPMD (including PMD) measurement systems to obtain the 3D shapes of specular objects with high accuracy.

  16. Measured performance of four PWR liquid radioactive waste treatment systems

    International Nuclear Information System (INIS)

    McIsaac, C.V.; Mandler, J.W.; Stalker, A.C.

    1980-01-01

    This paper presents results of a study of the liquid radwaste treatment and boron recovery systems of four operating PWR power plants. The performance of a given system was determined from measurements of radionuclide inventories in samples drawn from demineralizers, evaporators, filters, and gaseous cleanup systems. The plants at which measurements were made are Fort Calhoun, Zion 1 and 2, Turkey Point 3 and 4, and Rancho Seco

  17. Innovation and organisational performance: A critical review of the instruments used to measure organisational performance

    Directory of Open Access Journals (Sweden)

    Tebogo Sethibe

    2016-10-01

    Full Text Available Background: Innovation is recognised as one of the most important determinant of organisational performance. Yet, the results of studies that investigate the relationship between innovation and organisational performance are inconclusive. The inconsistency has been attributed to a number of factors, which include, among others, the measures used to evaluate organisational performance. Aim: This study was set out to identify, categorise and critically analyse the instruments used to assess organisational performance when investigating the relationship between innovation and organisational performance. Setting: The study focuses on all scientific publications reporting on organisational performance, inclusive of both financial and non-financial indicators of performance, and are not limited to any specific country or industry. Methods: The systematic literature review methodology was used to identify studies which investigated the relationship between innovation and organisational performance. Once identified, articles were analysed on the way organisational performance was measured. Classification was done with reference to financial and non-financial indicators, accounting and market-based, as well as objective and subjective measures. Results: The findings show that profitability, sales growth and return on assets (ROA are the most preferred accounting-based financial measures of organisation performance. In addition, Tobin’s Q was found to be the most favoured market-based financial measure of organisational performance. The study further reveals that market share, customer satisfaction and productivity are the most popular non-financial-based measures of organisational performance. Conclusion: The use of measures of organisational performance is often left to the discussion of the researcher, which is not implicitly wrong, but does little to contribute to the body of knowledge on this important topic. Researchers are firstly urged to

  18. Composite measures for profiling hospitals on bariatric surgery performance

    Science.gov (United States)

    Dimick, Justin B.; Birkmeyer, Nancy J.; Finks, Jonathan F.; Share, David A.; English, Wayne J.; Carlin, Arthur M.; Birkmeyer, John D.

    2014-01-01

    Objective We sought to develop a novel composite measure for profiling hospital performance with bariatric surgery. Design, Setting, and Patients Using clinical registry data from the Michigan Bariatric Surgery Collaborative (MBSC), we studied all patients undergoing bariatric surgery from 2008 to 2010. For gastric bypass surgery, we used empirical Bayes techniques to create a composite measure by combining several measures, including serious complications, reoperations, and readmissions; hospital and surgeon volume; and outcomes with other, related procedures. Hospitals were ranked based on 2008-09 and placed in one of 3 groups: 3-star (top third), 2-star (middle third), and 1-star (bottom third). We assessed how well these ratings predicted outcomes in the next year (2010), compared to other widely used measures. Main Outcome Measures Risk-adjusted serious complications. Results Composite measures explained a larger proportion of hospital-level variation in serious complication rates with gastric bypass than other measures. For example, the composite measure explained 89% of the variation compared to only 28% for risk-adjusted complication rates alone. Composite measures also appeared better at predicting future performance compared to individual measures. When ranked on the composite measure, 1-star hospitals (bottom 20%), had 2-fold higher serious complication rates (4.6% vs. 2.4%; OR 2.0; 95% CI, 1.1 to 3.5) compared to 3-star (top 20%) hospitals. Differences in serious complications rates between 1-star and 3-star hospitals were much smaller when hospitals were ranked using serious complications (4.0% vs. 2.7%; OR 1.6; 95% CI, 0.8-2.9) and hospital volume (3.3% vs. 3.2%; OR 0.85; 95% CI, 0.4 to 1.7) Conclusions Composite measures are much better at explaining hospital-level variation in serious complications and predicting future performance than other approaches. In this preliminary study, it appears that such composite measures may be better than existing

  19. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2012-04-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decisionmaking, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that canlead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issuesassociated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes animproved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  20. A Framework of Performance Measurement System for Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Dermawan Wibisono

    2011-10-01

    Full Text Available In the current dynamic environment, measuring a company’s performance becomes exceedingly complex since Performance Measurements Systems (PMS not only measure a company’s performance but also reflect their organizational culture and philosophy. Designing and implementing PMS is an integral part of management control systems. However, traditional PMS are criticized for being obsolete, irrelevant to managerial decision making, unrelated to strategic objectives and detrimental to organizational improvements. Given the shortcomings of traditional PMS, there is need for a new framework that can lead to the design of a PMS that balances short-term and long-term measures, internal and external measures, and financial and operational measures. This paper presents issues associated with the needs of a dynamic PMS, observe past research achievements in PMS and review past PMS frameworks that have been introduced. The paper then proposes an improved methodology for the design of a realistic PMS and its effective implementation in a manufacturing environment with case for Indonesia’s company.

  1. Multitasking TORT Under UNICOS: Parallel Performance Models and Measurements

    International Nuclear Information System (INIS)

    Azmy, Y.Y.; Barnett, D.A.

    1999-01-01

    The existing parallel algorithms in the TORT discrete ordinates were updated to function in a UNI-COS environment. A performance model for the parallel overhead was derived for the existing algorithms. The largest contributors to the parallel overhead were identified and a new algorithm was developed. A parallel overhead model was also derived for the new algorithm. The results of the comparison of parallel performance models were compared to applications of the code to two TORT standard test problems and a large production problem. The parallel performance models agree well with the measured parallel overhead

  2. Multitasking TORT under UNICOS: Parallel performance models and measurements

    International Nuclear Information System (INIS)

    Barnett, A.; Azmy, Y.Y.

    1999-01-01

    The existing parallel algorithms in the TORT discrete ordinates code were updated to function in a UNICOS environment. A performance model for the parallel overhead was derived for the existing algorithms. The largest contributors to the parallel overhead were identified and a new algorithm was developed. A parallel overhead model was also derived for the new algorithm. The results of the comparison of parallel performance models were compared to applications of the code to two TORT standard test problems and a large production problem. The parallel performance models agree well with the measured parallel overhead

  3. Veterans' voices: use of the American Customer Satisfaction Index (ACSI) Survey to identify My HealtheVet personal health record users' characteristics, needs, and preferences.

    Science.gov (United States)

    Nazi, Kim M

    2010-01-01

    Consumer research reveals considerable interest in the use of Personal Health Records (PHRs), yet adoption remains relatively low. Both adopters and nonadopters represent important perspectives from which to understand this paradox. This study focuses on direct feedback from adopters obtained using the American Customer Satisfaction Index (ACSI) survey on the My HealtheVet PHR portal (http://www.myhealth.va.gov) of the Veterans Health Administration (VHA). The results represent a source of direct feedback with which to better understand veterans' needs and preferences. The ACSI Survey was implemented in October 2007 to measure satisfaction and elicit information about characteristics and preferences of My HealtheVet PHR adopters. The data represent a continuous random sample of site visitors who have navigated at least four pages on the site. A total of 100 617 surveys were completed (17.2%). Satisfaction with My HealtheVet is high (8.3/10.0), and users are highly likely to return to the site (8.6/10.0) and recommend the site to other veterans (9.1/10.0). The majority of system adopters are male (91%), between the ages of 51 and 70 (68%), and served in the Vietnam War (60%). Most veterans currently visit the site to utilize pharmacy-related features. VHA has used the ACSI to monitor satisfaction, and to better understand the characteristics, needs, and preferences of early adopters. The data provide an important source of direct feedback to inform program development. Future research will include monitoring the impact of enhancements and new features on satisfaction, and conducting additional research with nonadopters to identify barriers to adoption and use.

  4. Veterans' voices: use of the American Customer Satisfaction Index (ACSI) Survey to identify My HealtheVet personal health record users' characteristics, needs, and preferences

    Science.gov (United States)

    2010-01-01

    Background Consumer research reveals considerable interest in the use of Personal Health Records (PHRs), yet adoption remains relatively low. Both adopters and nonadopters represent important perspectives from which to understand this paradox. Objective This study focuses on direct feedback from adopters obtained using the American Customer Satisfaction Index (ACSI) survey on the My HealtheVet PHR portal (http://www.myhealth.va.gov) of the Veterans Health Administration (VHA). The results represent a source of direct feedback with which to better understand veterans' needs and preferences. Methods The ACSI Survey was implemented in October 2007 to measure satisfaction and elicit information about characteristics and preferences of My HealtheVet PHR adopters. The data represent a continuous random sample of site visitors who have navigated at least four pages on the site. A total of 100 617 surveys were completed (17.2%). Results Satisfaction with My HealtheVet is high (8.3/10.0), and users are highly likely to return to the site (8.6/10.0) and recommend the site to other veterans (9.1/10.0). The majority of system adopters are male (91%), between the ages of 51 and 70 (68%), and served in the Vietnam War (60%). Most veterans currently visit the site to utilize pharmacy-related features. Conclusion VHA has used the ACSI to monitor satisfaction, and to better understand the characteristics, needs, and preferences of early adopters. The data provide an important source of direct feedback to inform program development. Future research will include monitoring the impact of enhancements and new features on satisfaction, and conducting additional research with nonadopters to identify barriers to adoption and use. PMID:20190065

  5. Performance tests for instruments measuring radon activity concentration

    International Nuclear Information System (INIS)

    Beck, T.R.; Buchroeder, H.; Schmidt, V.

    2009-01-01

    Performance tests of electronic instruments measuring the activity concentration of 222 Rn have been carried out with respect to the standard IEC 61577-2. In total, 9 types of instrument operating with ionization chambers or electrostatic collection have been tested for the influence of different climatic and radiological factors on the measurement characteristics. It is concluded that all types of instrument, which are commercially available, are suitable for indoor radon measurements. Because of the dependence on climatic conditions, the outdoor use is partly limited.

  6. A critical perspective on the measurement of performance in the empirical multinationality and performance literature

    DEFF Research Database (Denmark)

    Richter, Nicole Franziska; Schmidt, Robert; Ladwig, Tina J.

    2017-01-01

    used in empirical studies and the underlying theoretical streams that explain the effects on benefits and costs of multinationality. Our findings indicate that authors still largely rely on overall financial performance measures. Theoretical arguments, in contrast, refer to specific benefit and cost......This paper contributes to the core research in international business (IB), namely the relation between multinationality and performance, and is concerned with the quality of past empirical research designs. On the basis of 49 studies, we critically evaluate the match between performance measures...... positions that are better reflected in operational performance indicators. In our view, the idiosyncratic choice of the performance measures contributes to the varying results in past studies. We offer suggestions for improving future research designs....

  7. Performance of field measuring probes for SSC magnets

    International Nuclear Information System (INIS)

    Thomas, R.; Ganetis, G.; Herrera, J.; Hogue, R.; Jain, A.; Louie, W.; Marone, A.; Wanderer, P.

    1994-01-01

    Several years of experience have been acquired on the operation of probes (open-quotes molesclose quotes) constructed for the measurement of the multipole components of the magnetic fields of SSC magnets. The field is measured by rotating coils contained in a 2.4-m long tube that is pulled through the aperture of the magnet by an external device - the transporter. In addition to the measuring coils, the tube contains motors for rotating the coil and a system for sensing local vertical using gravity sensors to provide an absolute reference for the field measurements. The authors describe the steps that must be taken in order to ensure accurate, repeatable measurements; the design changes that have been motivated by difficulties encountered (noise, vibration, variations in temperature); and other performance issues. The mechanical interface between the probe and the beam tube of the magnet is also described

  8. Performance of field measuring probes for SSC magnets

    International Nuclear Information System (INIS)

    Thomas, R.; Ganetis, G.; Herrera, J.; Hogue, R.; Jain, A.; Louie, W.; Marone, A.; Wanderer, P.

    1993-01-01

    Several years of experience have been acquired on the operation of probes (''moles'') constructed for the measurement of the multipole components of the magnetic fields of SSC magnets. The field is measured by rotating coils contained in a 2.4-m long tube that is pulled through the aperture of the magnet by an external device-the transporter. In addition to the measuring coils, the tube contains motors for rotating the coil and a system for sensing local vertical using gravity sensors to provide an absolute reference for the field measurements. We describe the steps that must be taken in order to ensure accurate, repeatable measurements; the design changes that have been motivated by difficulties encountered (noise, vibration, variations in temperature); and other performance issues. The mechanical interface between the probe and the hewn tube of the magnet is also described

  9. A key performance measures for evaluating cold supply chain performance in farm industry

    Directory of Open Access Journals (Sweden)

    Shashi Shashi

    2015-08-01

    Full Text Available The main objective of this study was to develop a set of measures, evaluate their importance and effect in cold supply chain performance. This investigation reviewed previous research works on all the stages of the farm product supply chain. Based on farm product supply chain, 4 measures with 31 metrics were identified and developed to measure the cold supply chain performance. A survey was organized to establish the importance and the effect of identified measures. The 5 point Likert scale questionnaire was distributed among SC academics and practitioners. The observed finding infers that the measurement instrument was substantiating for evaluating cold supply chain performance in farm industry. The new developed metrics will help firms improve the visibility of supply among partners and in better decision making. The investigation was enfolded up through the plan of direction intended for future study.

  10. Performance measurement of workplace change: in two different cultural contexts

    Directory of Open Access Journals (Sweden)

    Chaiwat Riratanaphong

    2014-01-01

    Full Text Available Nowadays, organisations must cope with the pressure of cost reduction and efficiency in order to succeed in a highly competitive business environment. However, drivers to improve social interaction and employee’s performance and as such to contribute to organisational goals and objectives make it necessary to be concerned with other performance criteria as well, such as effectiveness, flexibility, employee satisfaction, productivity and creativity. There is a growing need for performance management and performance measurement that not only covers all aspects of an organisation, but which can be applied to various situations in a changing internal and external environment. Performance measurement methods which include an integrated perspective of performance have become essential. In addition, it has been realised that corporate real estate can contribute to organisational performance (Nourse and Roulac, 1993, De Vries et al., 2008, Lindholm, 2008, Den Heijer, 2011, Jensen et al., 2012. For this reason, worldwide organisations started to implement new ways of working in a more open and flexible work environment. Although there are various objectives and drivers of workplace change, the common objectives are to reduce costs and to increase efficiency. The changing organisational and external contexts, such as the increasing demand for talented knowledge workers and changing work patterns, have led to the development of new offices that can promote social networks and interaction among employees. The new workplace does not only aim at achieving cost efficiency, but it should also support employee satisfaction and productivity. This PhD research focuses on both themes i.e. performance measurement of workplace change. The aim of this research is to provide a conceptual framework that visualises the impact of workplace change on employees’ responses to the new work environment and to present guidelines on performance measurement of workplace

  11. Relationship between performance measurements and sale price of ...

    African Journals Online (AJOL)

    Unknown

    Abstract. The sale prices of 1 609 Dorper rams sold between 1990 and 1999 were compared with their measured performances. An analysis of variance was carried out in order to determine which variables influenced sale price. The most importance factors were classification (stud vs. commercial), auction weight and coat ...

  12. Managing for Results--Linking Performance Measures and Budgets.

    Science.gov (United States)

    McGee, William L.; Fountain, James R., Jr.

    1995-01-01

    The Government Accounting Standards Board notion of service efforts and accomplishments reporting is one step in a process of managing for results that includes strategic planning, development and use of performance measures of managing ongoing programs, and outputs to budgetary appropriation. Reports a trial application to one school district.…

  13. Key performance indicators for measuring sustainability in health ...

    African Journals Online (AJOL)

    Key performance indicators for measuring sustainability in health care industry in Malaysia. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Journal Home > Vol 10, No 1S (2018) > ... Next, an in-depth meeting was conducted to gain insights and feedbacks with the management of a private hospital.

  14. Investment horizons : A time-dependent measure of asset performance

    OpenAIRE

    Ingve Simonsen; Anders Johansen; Mogens H. Jensen

    2005-01-01

    We review a resent {\\em time-dependent} performance measure for economical time series -- the (optimal) investment horizon approach. For stock indices, the approach shows a pronounced gain-loss asymmetry that is {\\em not} observed for the individual stocks that comprise the index. This difference may hint towards an synchronize of the draw downs of the stocks.

  15. Introducing the Balanced Scorecard: Creating Metrics to Measure Performance

    Science.gov (United States)

    Gumbus, Andra

    2005-01-01

    This experiential exercise presents the concept of the Balanced Scorecard (BSC) and applies it in a university setting. The Balanced Scorecard was developed 12 years ago and has grown in popularity and is used by more than 50% of the Fortune 500 companies as a performance measurement and strategic management tool. The BSC expands the traditional…

  16. Measuring supply chain performance in the agri-food sector

    NARCIS (Netherlands)

    Aramyan, L.H.

    2007-01-01

    Keywords : PMS,agri-food, supply chain, efficiency, flexibility, responsiveness, food quality

    The main objective of this research is to contribute to the development of a Performance Measurement System (PMS) foragri-food supply chains that involves the entire chain (i.e. all

  17. Quantitative measures of CRE and its link with organizational performance

    NARCIS (Netherlands)

    Appel - Meulenbroek, H.A.J.A.

    2007-01-01

    For CREM (Corporate Real Estate Management) to be able to deliver added value to its client organisation, it has to know 1) which CRE aspects influence its employees, processes, machinery, visitors, etc, 2) how these aspects influence performance and 3) how to measure and manage them. Analysis of

  18. PECULIARITIES OF PERFORMANCE MEASUREMENT IN SOVEREIGN WEALTH FUNDS

    Directory of Open Access Journals (Sweden)

    M. Onopko

    2014-01-01

    Full Text Available Sovereign wealth funds as the subjects of economic relations are analyzed and the main approaches to the assessment of their activities are discussed. The dependence of the performance measurement system and the strategic objectives of the funds and economic policy objectives of the government is indicated.

  19. Performance measurement system for training simulators. Interim report

    International Nuclear Information System (INIS)

    Bockhold, G. Jr.; Roth, D.R.

    1978-05-01

    In the first project phase, the project team has designed, installed, and test run on the Browns Ferry nuclear power plant training simulator a performance measurement system capable of automatic recording of statistical information on operator actions and plant response. Key plant variables and operator actions were monitored and analyzed by the simulator computer for a selected set of four operating and casualty drills. The project has the following objectives: (1) To provide an empirical data base for statistical analysis of operator reliability and for allocation of safety and control functions between operators and automated controls; (2) To develop a method for evaluation of the effectiveness of control room designs and operating procedures; and (3) To develop a system for scoring aspects of operator performance to assist in training evaluations and to support operator selection research. The performance measurement system has shown potential for meeting the research objectives. However, the cost of training simulator time is high; to keep research program costs reasonable, the measurement system is being designed to be an integral part of operator training programs. In the pilot implementation, participating instructors judged the measurement system to be a valuable and objective extension of their abilities to monitor trainee performance

  20. Performance Measures of Academic Faculty--A Case Study

    Science.gov (United States)

    Davidovitch, Nitza; Soen, Dan; Sinuani-Stern, Zila

    2011-01-01

    This case study is the first to track the method used by an Israeli institution of higher education to assess and reward faculty members using a set of performance measures ("Excellence criteria"). The study profiles faculty members who received financial rewards for excellence during 2005-2007, based on the previous year's activities,…

  1. Individual match approach to Bowling performance measures in ...

    African Journals Online (AJOL)

    Match conditions can play a significant role in player performances in a cricket match. If the pitch is in a good condition, the batsmen can achieve good scores, making it difficult for the bowlers. In the case of an uneven pitch or adverse weather conditions, the bowlers may have the upper hand. In order to measure bowlers' ...

  2. Two Measures for Enhancing Data Association Performance in SLAM

    Directory of Open Access Journals (Sweden)

    Wu Zhou

    2014-01-01

    Full Text Available Data association is one of the key problems in the SLAM community. Several data association failures may cause the SLAM results to be divergent. Data association performance in SLAM is affected by both data association methods and sensor information. Two measures of handling sensor information are introduced herein to enhance data association performance in SLAM. For the first measure, truncating strategy of limited features, instead of all matched features, is used for observation update. These features are selected according to an information variable. This truncating strategy is used to lower the effect of false matched features. For the other measure, a special rejecting mechanism is designed to reject suspected observations. When the predicted robot pose is obviously different from the updated robot pose, all observed sensor information at this moment is discarded. The rejecting mechanism aims at eliminating accidental sensor information. Experimental results indicate that the introduced measures perform well in improving the stability of data association in SLAM. These measures are of extraordinary value for real SLAM applications.

  3. Sampling Approaches for Multi-Domain Internet Performance Measurement Infrastructures

    Energy Technology Data Exchange (ETDEWEB)

    Calyam, Prasad

    2014-09-15

    The next-generation of high-performance networks being developed in DOE communities are critical for supporting current and emerging data-intensive science applications. The goal of this project is to investigate multi-domain network status sampling techniques and tools to measure/analyze performance, and thereby provide “network awareness” to end-users and network operators in DOE communities. We leverage the infrastructure and datasets available through perfSONAR, which is a multi-domain measurement framework that has been widely deployed in high-performance computing and networking communities; the DOE community is a core developer and the largest adopter of perfSONAR. Our investigations include development of semantic scheduling algorithms, measurement federation policies, and tools to sample multi-domain and multi-layer network status within perfSONAR deployments. We validate our algorithms and policies with end-to-end measurement analysis tools for various monitoring objectives such as network weather forecasting, anomaly detection, and fault-diagnosis. In addition, we develop a multi-domain architecture for an enterprise-specific perfSONAR deployment that can implement monitoring-objective based sampling and that adheres to any domain-specific measurement policies.

  4. Contracts, Performance Measurement and Accountability in the Public Sector

    DEFF Research Database (Denmark)

    Drewry, Gavin; Greve, Carsten; Tanquerel, Thierry

    This book addresses issues to do with public accountability, audit and performance measurement that are both highly topical and of crucial importance to the theory and practice of public administration in an era of contractualized public management. The literature on public sector contracting...... of audit and accountability in a variety of countries and contexts; the third part offers some wider, cross-cutting perspectives. Based on the work of the EGPA permanent study group on the history of contractualization, Contracts, Performance Measurement and Accountability in the Public Sector draws upon...... - covering both 'hard' agreements (ones that are legally enforceable) and 'soft' agreements (enforced by negotiation and mutual trust) - has been growing for some time and the present book adds a primarily European perspective on contracting, performance-based management and accountability. One important...

  5. A performance measurement using balanced scorecard and structural equation modeling

    Directory of Open Access Journals (Sweden)

    Rosha Makvandi

    2014-02-01

    Full Text Available During the past few years, balanced scorecard (BSC has been widely used as a promising method for performance measurement. BSC studies organizations in terms of four perspectives including customer, internal processes, learning and growth and financial figures. This paper presents a hybrid of BSC and structural equation modeling (SEM to measure the performance of an Iranian university in province of Alborz, Iran. The proposed study of this paper uses this conceptual method, designs a questionnaire and distributes it among some university students and professors. Using SEM technique, the survey analyzes the data and the results indicate that the university did poorly in terms of all four perspectives. The survey extracts necessary target improvement by presenting necessary attributes for performance improvement.

  6. Standardization of test conditions for gamma camera performance measurement

    International Nuclear Information System (INIS)

    Jordan, K.

    1980-01-01

    The actual way of measuring gamma camera performance is to use point sources or flood sources in air, often in combination with bar phantoms. This method mostly brings best performance parameters for cameras but it has nothing in common with the use of a camera in clinical practice. Particular in the case of low energy emitters, like Tc-99m, the influence of scattered radiation over the performance of cameras is very high. Therefore it is important to have test conditions of radionuclide imaging devices, that will approach as best as practicable the measuring conditions in clinical applications. It is therefore a good news that the International Electrochemical Commission IEC has prepared a draft 'Characteristics and test conditions of radionuclide imaging devices' which is now submitted to the national committees for formal approval under the Six Months' Rule. Some essential points of this document are discussed in the paper. (orig.) [de

  7. Building and measuring a high performance network architecture

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, William T.C.; Toole, Timothy; Fisher, Chuck; Dugan, Jon; Wheeler, David; Wing, William R; Nickless, William; Goddard, Gregory; Corbato, Steven; Love, E. Paul; Daspit, Paul; Edwards, Hal; Mercer, Linden; Koester, David; Decina, Basil; Dart, Eli; Paul Reisinger, Paul; Kurihara, Riki; Zekauskas, Matthew J; Plesset, Eric; Wulf, Julie; Luce, Douglas; Rogers, James; Duncan, Rex; Mauth, Jeffery

    2001-04-20

    Once a year, the SC conferences present a unique opportunity to create and build one of the most complex and highest performance networks in the world. At SC2000, large-scale and complex local and wide area networking connections were demonstrated, including large-scale distributed applications running on different architectures. This project was designed to use the unique opportunity presented at SC2000 to create a testbed network environment and then use that network to demonstrate and evaluate high performance computational and communication applications. This testbed was designed to incorporate many interoperable systems and services and was designed for measurement from the very beginning. The end results were key insights into how to use novel, high performance networking technologies and to accumulate measurements that will give insights into the networks of the future.

  8. The merit of cogeneration: Measuring and rewarding performance

    International Nuclear Information System (INIS)

    Verbruggen, Aviel

    2008-01-01

    Cogeneration or combined heat and power (CHP) is a thermal power generation cycle with the merit of recovering part or all of the heat that is fatally discarded by such cycles. This merit of higher efficiency is subject of rewarding by public authorities. When the EU enacts CHP promotion in a Directive (1997-2004), crucial measurement and qualification issues remain unsolved. CEN (coordinator of the European Bureaus of Standards) contributes in clarifying the measurement of CHP activities, but shortfalls remain, while CEN bypasses the debate on qualifying CHP performance. This article offers appropriate methods for measuring CHP activities based on design characteristics of the plants. The co-generated electric output is a necessary and sufficient indicator of CHP merit and performance. Regulators can extend this indicator, but should avoid the perverse effects of biased external benchmarking as the EU Directive entails

  9. Proposed system for measuring project performance using process-based key performance indicators

    NARCIS (Netherlands)

    Haponava, T.; Al-Jibouri, Saad H.S.

    2012-01-01

    Despite some evidence of its usefulness, performance measurement by using Key Performance Indicators (KPIs) in the construction industry also has its critics. Among the shortcomings attributed to existing KPIs is the fact that almost all of them are product oriented. This means that the indicators

  10. The Curvilinear Association between Performance Measurement System Design and Strategic Performance

    DEFF Research Database (Denmark)

    Schneider, Melanie L.; Mahlendorf, Matthias D.; Schäffer, Utz

    This paper reconciles prior research regarding beneficial and detrimental effects of performance measurement system (PMS) design on performance by arguing for a curvilinear association. By taking the too-much-of-a-good-thing effect as a starting point, we challenge the assumption of a linear...

  11. Strategic performance management: development of a performance measurement system at the Mayo Clinic.

    Science.gov (United States)

    Curtright, J W; Stolp-Smith, S C; Edell, E S

    2000-01-01

    Managing and measuring performance become exceedingly complex as healthcare institutions evolve into integrated health systems comprised of hospitals, outpatient clinics and surgery centers, nursing homes, and home health services. Leaders of integrated health systems need to develop a methodology and system that align organizational strategies with performance measurement and management. To meet this end, multiple healthcare organizations embrace the performance-indicators reporting system known as a "balanced scorecard" or a "dashboard report." This discrete set of macrolevel indicators gives senior management a fast but comprehensive glimpse of the organization's performance in meeting its quality, operational, and financial goals. The leadership of outpatient operations for Mayo Clinic in Rochester, Minnesota built on this concept by creating a performance management and measurement system that monitors and reports how well the organization achieves its performance goals. Internal stakeholders identified metrics to measure performance in each key category. Through these metrics, the organization links Mayo Clinic's vision, primary value, core principles, and day-to-day operations by monitoring key performance indicators on a weekly, monthly, or quarterly basis.

  12. PERFORMANCE MEASUREMENT OF UCITS INVESTMENT FUNDS IN CROATIA

    Directory of Open Access Journals (Sweden)

    Marko Curkovic

    2017-03-01

    Full Text Available UCITS investment funds represent an important investment opportunity for retail, as well for institutional investors in the European Union. The aim of this paper is to analyse the performance of the UCITS investment funds in Croatia and to detect relatively homogeneous groups among the UCITS funds based on its performance. The analysis includes 55 UCITS, in the period from the beginning of 2011 until the end of 2014, and it is conducted on daily data of share prices, available from Bloomberg terminal. Analysis is performed separately within the groups of different investment fund by investment strategy. The research methodology is based on the calculation of various indicators of absolute and relative risk-adjusted performance and riskiness of the funds. In general, based on analysis of performance measures, it can be concluded that funds with higher values of net assets were more successful compared to the funds with below-average asset values. Also, funds with below-average values of net assets were more volatile. At the same time, funds run by foreign own management companies were more successful by the absolute performance measures, compared to funds run by management companies with domestic ownership. On the other hand, those funds were more volatile, as well.

  13. THE PERFORMANCE OF THE ECONOMIC ENTITY MEASURED THROUGH ACCOUNTING INFORMATION

    Directory of Open Access Journals (Sweden)

    Marius Cristian Milos

    2012-01-01

    Full Text Available The users of financial statements need information regarding the resources of an economic entity and also data regarding the way in which the entity’s management is using resources. This information helps users to quantify efficiency and performance within an entity. There are many stakeholders who do show interest in an entity’s financial reports, including existing and potential investors, employees, lenders, suppliers, customers, regulators and other government agencies and not the least the common citizens. The main purpose of this paper is to highlight the importance of the performance measurement and to discuss possible reporting methods. Performance is a concept that raises many questions regarding the most accurate way or the best method for quantifying and reporting performance at the company level .So if financial performance indicators are considered to offer an accurate image of the situation of a company, the modern approach which focuses also on non-financial indicators offers new perspectives upon performance measurement, which may be really expressive and also based on simplicity.

  14. Joint Macro and Femto Field Performance and Interference Measurements

    DEFF Research Database (Denmark)

    Jørgensen, Niels T.K.; Isotalo, Tero; Pedersen, Klaus

    2012-01-01

    In this paper macro performance in a co-channel macro and femto setup is studied. Measurements are performed in a live Universal Mobile Telecommunication System (UMTS) network. It is concluded that femto interference does not affect macro downlink (DL) performance as long as the macro Received Si...... radius smaller than 5 meter – with realistic power settings. This makes co-channel femto deployment less promising in dense macro environments with good macro RSCP coverage.......In this paper macro performance in a co-channel macro and femto setup is studied. Measurements are performed in a live Universal Mobile Telecommunication System (UMTS) network. It is concluded that femto interference does not affect macro downlink (DL) performance as long as the macro Received...... Signal Code Power (RSCP) is stronger than femto RSCP. We also conclude that a macro escape carrier is a robust DL interference management solution. In uplink (UL) direction it is shown that a single femto UE close to macro cell potentially can cause a noise rise of 6 dB in the surrounding macro cell...

  15. The impact of multi-criteria performance measurement on business performance improvement

    OpenAIRE

    Kasie, Fentahun Moges; Belay, Alemu Moges

    2013-01-01

    Purpose: The purpose of this paper is to investigate the relationship between multi-criteria performance measurement (MCPM) practice and business performance improvement using the raw data collected from 33 selected manufacturing companies. In addition, it proposes modified MCPM model as an effective approach to improve business performance of manufacturing companies. Design/methodology/approach:Research paper. Primary and secondary data were collected using questionnaire survey, interview an...

  16. Performance Measurement using KPKU- BUMN in X School Education Foundation

    Science.gov (United States)

    Arijanto, Sugih; Harsono, Ambar; Taroepratjeka, Harsono

    2016-01-01

    The purpose of this research is to determine X School's Strengths and Opportunity of Improvement through performance measurement using KPKU-BUMN (Kriteria Penilaian Kinerja Unggul - Kementerian Badan Usaha Milik Negara). KPKU-BUMN is developed based on Malcolm Baldrige Criteria for Performance Excellent (MBCfPE). X school is an education foundation at Bandung that has provides education from kindergarten, elementary school, to junior and senior high school. The measurement is implemented by two aspects, Process and Result. The Process is measured by A-D-L-I approaches (Approach- Deployment-Learning- Integration), on the other hand The Result is measured by Le-T-C-I approach (Level-Trend- Comparison-Integration). There are six processes that will be measured: (1) Leadership, (2) Strategic Planning, (3) Customer Focus, (4) Measurement, Analysis and Knowledge Management, (5) Work Force Focus, and (6) Operation Focus. Meanwhile, the result are (a) product & process outcomes, (b) customer-focused outcomes, (c) workforce-focused outcomes, (d) leadership & governance outcomes, and (e) financial & market outcomes. The overall score for X School is 284/1000, which means X School is at “early result” level at “poor” global image.

  17. Measuring the performance of visual to auditory information conversion.

    Directory of Open Access Journals (Sweden)

    Shern Shiou Tan

    Full Text Available BACKGROUND: Visual to auditory conversion systems have been in existence for several decades. Besides being among the front runners in providing visual capabilities to blind users, the auditory cues generated from image sonification systems are still easier to learn and adapt to compared to other similar techniques. Other advantages include low cost, easy customizability, and universality. However, every system developed so far has its own set of strengths and weaknesses. In order to improve these systems further, we propose an automated and quantitative method to measure the performance of such systems. With these quantitative measurements, it is possible to gauge the relative strengths and weaknesses of different systems and rank the systems accordingly. METHODOLOGY: Performance is measured by both the interpretability and also the information preservation of visual to auditory conversions. Interpretability is measured by computing the correlation of inter image distance (IID and inter sound distance (ISD whereas the information preservation is computed by applying Information Theory to measure the entropy of both visual and corresponding auditory signals. These measurements provide a basis and some insights on how the systems work. CONCLUSIONS: With an automated interpretability measure as a standard, more image sonification systems can be developed, compared, and then improved. Even though the measure does not test systems as thoroughly as carefully designed psychological experiments, a quantitative measurement like the one proposed here can compare systems to a certain degree without incurring much cost. Underlying this research is the hope that a major breakthrough in image sonification systems will allow blind users to cost effectively regain enough visual functions to allow them to lead secure and productive lives.

  18. Measurement properties of continuous text reading performance tests.

    Science.gov (United States)

    Brussee, Tamara; van Nispen, Ruth M A; van Rens, Ger H M B

    2014-11-01

    Measurement properties of tests to assess reading acuity or reading performance have not been extensively evaluated. This study aims to provide an overview of the literature on available continuous text reading tests and their measurement properties. A literature search was performed in PubMed, Embase and PsycInfo. Subsequently, information on design and content of reading tests, study design and measurement properties were extracted using consensus-based standards for selection of health measurement instruments. Quality of studies, reading tests and measurement properties were systematically assessed using pre-specified criteria. From 2334 identified articles, 20 relevant articles were found on measurement properties of three reading tests in various languages: IReST, MNread Reading Test and Radner Reading Charts. All three reading tests scored high on content validity. Reproducibility studies (repeated measurements between different testing sessions) of the IReST and MNread of commercially available reading tests in different languages were missing. The IReST scored best on inter-language comparison, the MNread scored well in repeatability studies (repeated measurements under the same conditions) and the Radner showed good reproducibility in studies. Although in daily practice there are other continuous text reading tests available meeting the criteria of this review, measurement properties were described in scientific studies for only three of them. Of the few available studies, the quality and content of study design and methodology used varied. For testing existing reading tests and the development of new ones, for example in other languages, we make several recommendations, including careful description of patient characteristics, use of objective and subjective lighting levels, good control of working distance, documentation of the number of raters and their training, careful documentation of scoring rules and the use of Bland-Altman analyses or similar for

  19. Development of measurement standards for verifying functional performance of surface texture measuring instruments

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, A [Life and Industrial Product Development Department Olympus Corporation, 2951 Ishikawa-machi, Hachiouji-shi, Tokyo (Japan); Suzuki, H [Industrial Marketing and Planning Department Olympus Corporation, Shinjyuku Monolith, 3-1 Nishi-Shinjyuku 2-chome, Tokyo (Japan); Yanagi, K, E-mail: a_fujii@ot.olympus.co.jp [Department of Mechanical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka-machi, Nagaoka-shi, Niigata (Japan)

    2011-08-19

    A new measurement standard is proposed for verifying overall functional performance of surface texture measuring instruments. Its surface is composed of sinusoidal surface waveforms of chirp signals along horizontal cross sections of the material measure. One of the notable features is that the amplitude of each cycle in the chirp signal form is geometrically modulated so that the maximum slope is kept constant. The maximum slope of the chirp-like signal is gradually decreased according to movement in the lateral direction. We fabricated the measurement standard by FIB processing, and it was calibrated by AFM. We tried to evaluate the functional performance of Laser Scanning Microscope by this standard in terms of amplitude response with varying slope angles. As a result, it was concluded that the proposed standard can easily evaluate the performance of surface texture measuring instruments.

  20. Measuring process performance within healthcare logistics - a decision tool for selecting measuring technologies

    DEFF Research Database (Denmark)

    Feibert, Diana Cordes; Jacobsen, Peter

    2015-01-01

    Performance measurement can support the organization in improving the efficiency and effectiveness of logistical healthcare processes. Selecting the most suitable technologies is important to ensure data validity. A case study of the hospital cleaning process at a public Danish hospital...... was conducted. Monitoring tasks and ascertaining quality of work is difficult in such a process. Based on principal-agent theory, a set of decision indicator has been developed, and a decision framework for assessing technologies to enable performance measurement has been proposed....

  1. Formulating a VET roadmap for the waste and recycling sector: A case study from Queensland, Australia

    Energy Technology Data Exchange (ETDEWEB)

    Davis, G., E-mail: gudavis@cytanet.com.cy [Dr Georgina Davis, ABN 12 744 598 837, Banksia Beach, Brisbane, QLD 4507 (Australia)

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Existing qualifications do not meet the needs of the sector in Queensland. Black-Right-Pointing-Pointer Businesses may not be best positioned to identify training needs. Black-Right-Pointing-Pointer Companies are developing training internally to meet their own specific needs. Black-Right-Pointing-Pointer Smaller companies lack the resources to develop internal training are disadvantaged. Black-Right-Pointing-Pointer There is industry support for an entry-level, minimum industry qualification. - Abstract: Vocational Education and Training (VET) is an essential tool for providing waste management and recycling workers with the necessary skills and knowledge needed to beneficially influence their own employment and career development; and to also ensure productivity and safe working conditions within the organisations in which they are employed. Current training opportunities within Queensland for the sector are limited and not widely communicated or marketed; with other States, particularly Victoria and New South Wales, realising higher numbers of VET enrollments for waste management courses. This paper presents current VET opportunities and trends for the Queensland waste management sector. Results from a facilitated workshop to identify workforce requirements and future training needs organised by the Waste Contractors and Recyclers Association of Queensland (WCRAQ) are also presented and discussion follows on the future training needs of the industry within Queensland.

  2. Formulating a VET roadmap for the waste and recycling sector: A case study from Queensland, Australia

    International Nuclear Information System (INIS)

    Davis, G.

    2012-01-01

    Highlights: ► Existing qualifications do not meet the needs of the sector in Queensland. ► Businesses may not be best positioned to identify training needs. ► Companies are developing training internally to meet their own specific needs. ► Smaller companies lack the resources to develop internal training are disadvantaged. ► There is industry support for an entry-level, minimum industry qualification. - Abstract: Vocational Education and Training (VET) is an essential tool for providing waste management and recycling workers with the necessary skills and knowledge needed to beneficially influence their own employment and career development; and to also ensure productivity and safe working conditions within the organisations in which they are employed. Current training opportunities within Queensland for the sector are limited and not widely communicated or marketed; with other States, particularly Victoria and New South Wales, realising higher numbers of VET enrollments for waste management courses. This paper presents current VET opportunities and trends for the Queensland waste management sector. Results from a facilitated workshop to identify workforce requirements and future training needs organised by the Waste Contractors and Recyclers Association of Queensland (WCRAQ) are also presented and discussion follows on the future training needs of the industry within Queensland.

  3. Vocational teachers taking the lead: VET teachers and the career services for teachers reform in Sweden

    Directory of Open Access Journals (Sweden)

    Daniel Alvunger

    2016-02-01

    Full Text Available In 2013 the Swedish government launched a reform on career services for teachers that introduced first-teachers as a new category of teachers. Since this reform still is in the process of being rolled out, we know fairly little of its impact, especially concerning VET teachers that are appointed first-teachers. This paper explores and analyses two cases of VET first-teachers with focus on the implications on educational leadership practices in their work with school improvement where 'distributed leadership' is used as a lens for understanding the characteristic features of leader-ship practices. The results show that the VET first-teachers consider themselves to represent an important educational leadership being process leaders for creating a culture built on mutual trust, turning the focus of school improvement from a 'top-down' perspective to change 'from below'. They become 'brokers' and a link between school management and their colleagues, even if there are some difficulties. Moreover they visualise different practices and foster a new awareness - concerning e.g. assessment and the relationship between school and work-place - that seem to influence collegial discourse.

  4. Development and Evaluation of vetPAL, a Student-Led, Peer-Assisted Learning Program.

    Science.gov (United States)

    Bates, Lucy S W; Warman, Sheena; Pither, Zoe; Baillie, Sarah

    Based on an idea from a final-year student, Bristol Veterinary School introduced vetPAL, a student-led, peer-assisted learning program. The program involved fifth-year (final-year) students acting as tutors and leading sessions for fourth-year students (tutees) in clinical skills and revision (review) topics. The initiative aimed to supplement student learning while also providing tutors with opportunities to further develop a range of skills. All tutors received training and the program was evaluated using questionnaires collected from tutees and tutors after each session. Tutees' self-rated confidence increased significantly in clinical skills and for revision topics. Advantages of being taught by students rather than staff included the informal atmosphere, the tutees' willingness to ask questions, and the relatability of the tutors. The small group size and the style of learning in the revision sessions (i.e., group work, discussions, and interactivity) were additional positive aspects identified by both tutees and tutors. Benefits for tutors included developing their communication and teaching skills. The training sessions were considered key in helping tutors feel prepared to lead sessions, although the most difficult aspects were the lack of teaching experience and time management. Following the successful pilot of vetPAL, plans are in place to make the program permanent and sustainable, while incorporating necessary changes based on the evaluation and the student leader's experiences running the program. A vetPAL handbook has been created to facilitate organization of the program for future years.

  5. Thermal performance measurements on ultimate heat sinks--cooling ponds

    International Nuclear Information System (INIS)

    Hadlock, R.K.; Abbey, O.B.

    1977-12-01

    The primary objective of the studies described is to obtain the requisite data, with respect to modeling requirements, to characterize thermal performance of heat sinks for nuclear facilities existing at elevated water temperatures in result of experiencing a genuinely large heat load and responding to meteorological influence. The data should reflect thermal performance for combinations leading to worst-case meteorological influence. A geothermal water retention basin has been chosen as the site for the first measurement program and data have been obtained in the first of several experiments scheduled to be performed there. These data illustrate the thermal and water budgets during episodes of cooling from an initially high pond water bulk temperature. Monitoring proceeded while the pond experienced only meteorological and seepage influence. The data are discussed and are presented as a data volume which may be used for calculation purposes. Suggestions for future measurement programs are stated with the intent to maintain and improve relevance to nuclear ultimate heat sinks while continuing to examine the performance of the analog geothermal pond. It is further suggested that the geothermal pond, with some modification, may be a suitable site for spray pond measurements

  6. Measuring recent research performance for Chinese universities using bibliometric methods

    KAUST Repository

    Zhu, Jia

    2014-07-29

    This paper focuses on measuring the academic research performance of Chinese universities by using Scopus database from 2007 to 2010. We have provided meaningful indicators to measure the research performance of Chinese universities as compared to world class universities of the US and the European region. Using these indicators, we first measure the quantity and quality of the research outcomes of the universities and then examine the internationalization of research by using international collaborations, international citations and international impact metrics. Using all of this data, we finally present an overall score called research performance point to measure the comprehensive research strength of the universities for the selected subject categories. The comparison identifies the gap between Chinese universities and top-tier universities from selected regions across various subject areas. We find that Chinese universities are doing well in terms of publication volume but receive less citations from their published work. We also find that the Chinese universities have relative low percentage of publications at high impact venues, which may be the reason that they are not receiving more citations. Therefore, a careful selection of publication venues may help the Chinese universities to compete with world class universities and increase their research internationalization. © 2014 Akadémiai Kiadó, Budapest, Hungary.

  7. TRACEABILITY OF PRECISION MEASUREMENTS ON COORDINATE MEASURING MACHINES – PERFORMANCE VERIFICATION OF CMMs

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Sobiecki, René; Tosello, Guido

    This document is used in connection with one exercise of 30 minutes duration as a part of the course VISION ONLINE – One week course on Precision & Nanometrology. The exercise concerns performance verification of the volumetric measuring capability of a small volume coordinate measuring machine...

  8. Measuring cognitive load: performance, mental effort and simulation task complexity.

    Science.gov (United States)

    Haji, Faizal A; Rojas, David; Childs, Ruth; de Ribaupierre, Sandrine; Dubrowski, Adam

    2015-08-01

    Interest in applying cognitive load theory in health care simulation is growing. This line of inquiry requires measures that are sensitive to changes in cognitive load arising from different instructional designs. Recently, mental effort ratings and secondary task performance have shown promise as measures of cognitive load in health care simulation. We investigate the sensitivity of these measures to predicted differences in intrinsic load arising from variations in task complexity and learner expertise during simulation-based surgical skills training. We randomly assigned 28 novice medical students to simulation training on a simple or complex surgical knot-tying task. Participants completed 13 practice trials, interspersed with computer-based video instruction. On trials 1, 5, 9 and 13, knot-tying performance was assessed using time and movement efficiency measures, and cognitive load was assessed using subjective rating of mental effort (SRME) and simple reaction time (SRT) on a vibrotactile stimulus-monitoring secondary task. Significant improvements in knot-tying performance (F(1.04,24.95)  = 41.1, p cognitive load (F(2.3,58.5)  = 57.7, p load among novices engaged in simulation-based learning. These measures can be used to track cognitive load during skills training. Mental effort ratings are also sensitive to small differences in intrinsic load arising from variations in the physical complexity of a simulation task. The complementary nature of these subjective and objective measures suggests their combined use is advantageous in simulation instructional design research. © 2015 John Wiley & Sons Ltd.

  9. A Thermographic Measurement Approach to Assess Supercapacitor Electrical Performances

    Directory of Open Access Journals (Sweden)

    Stanislaw Galla

    2017-12-01

    Full Text Available This paper describes a proposal for the qualitative assessment of condition of supercapacitors based on the conducted thermographic measurements. The presented measurement stand was accompanied by the concept of methodology of performing tests. Necessary conditions, which were needed to minimize the influence of disturbing factors on the performance of thermal imaging measurements, were also indicated. Mentioned factors resulted from both: the hardware limitations and from the necessity to prepare samples. The algorithm that was used to determine the basic parameters for assessment has been presented. The article suggests to use additional factors that may facilitate the analysis of obtained results. Measuring the usefulness of the proposed methodology was tested on commercial samples of supercapacitors. All of the tests were taken in conjunction with the classical methods based on capacitance (C and equivalent series resistance (ESR measurements, which were also presented in the paper. Selected results presenting the observed changes occurring in both: basic parameters of supercapacitors and accompanying fluctuations of thermal fields, along with analysis, were shown. The observed limitations of the proposed assessment method and the suggestions for its development were also described.

  10. Process-oriented performance indicators for measuring ecodesign management practices

    DEFF Research Database (Denmark)

    Rodrigues, Vinicius Picanco; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

    2016-01-01

    In order to support ecodesign performance measurement from a business perspective, this paper performs an exploration of available process-oriented indicators to be applied to ecodesign management practices. With the Ecodesign Maturity Model as a background framework, a systematic literature review...... coupled with a cross-content analysis was carried out to assign proper indicators to the practices. Results show that the currently available indicators do not fully reflect the characteristics of ecodesign and there is significant room for improving the development of tailor-made indicators....

  11. Optimisation of key performance measures in air cargo demand management

    OpenAIRE

    Alexander May; Adrian Anslow; Udechukwu Ojiako; Yue Wu; Alasdair Marshall; Maxwell Chipulu

    2014-01-01

    This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that ...

  12. Quantification of the flow measurement performance due to installation changes

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ana Luisa Auler da Silva [Petrobras Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    The objective is to present a criterion to identify and quantify improvements in the performance of flowmeters due to alterations in the design of a measurement system. The method was developed aiming at improvements in the operational systems, but is also useful in custody transfer systems. Take as base the estimate of uncertainty in the measurement systems, and seek a more intuitive way so as to aggregate the experience and knowledge available in the company. The identification of the measurand is carried out based on available information, the processing of data and the method of calculation. The improvements in the installation of measurement systems are given priority based on the measurement uncertainty of the CTPL (temperature and pressure correction factor) and the MF(meter factor). In the case of the CTPL, the influence of the pressure, temperature and density instruments in the results of the measurement system is evaluated, and in the case of the MF, the influence of the calibration system. The possibilities for calibrating the flowmeter in industry are presented, also detailing the calibration of the operational meter against custody transfer systems. The analysis of networks includes calculating the uncertainty in the closing of the network balance, calculation of the uncertainties and contributions of the measurement systems that form part of the network, and a comparison of improvements and costs, calculation for each alteration in the design of the measurement system, and its cost per improvement of 0.01% in the uncertainty of the closing. (author)

  13. Innovative Performance Measurement: an Integrative Perspective of Stakeholder's View

    Directory of Open Access Journals (Sweden)

    López-Fresno Palmira

    2014-11-01

    Full Text Available Business Process Management (BPM has been increasingly focused as an holistic approach to manage organizations for better organizational effectiveness. BPM involves the use of innovative performance measurement systems to follow up, coordinate, control and improve processes and overall business efficacy and efficiency. In this paper we propose a global holistic perspective of integrated information, combining the view of all stakeholders and both qualitative and quantitative information, as a basic prerequisite for quality of information for better decision making. The paper includes findings from an empirical case study of measuring Parkinson's Disease Neurosurgery process, including stakeholder's view with an integrative perspective.

  14. Influence of Spherical Radiation Pattern Measurement Uncertainty on Handset Performance Measures

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ødum; Pedersen, Gert Frølund

    2005-01-01

    system that may introduce errors in standardized performance measurements. Radiation patterns of six handsets have been measured while they were mounted at various offsets from the reference position defined by the Cellular Telecommunications & Internet Association (CTIA) certification. The change...... in the performance measures are investigated for both the GSM-900 and the GSM-1800 band. Despite the deliberately large deviations from the reference position, the changes in TRP and TIS are generally within ±0.5 dB with a maximum of about 1.4 dB. For the MEG values the results depend on the orientation...

  15. Accuracy of intraocular pressure measurements in dogs using two different tonometers and plano therapeutic soft contact lenses.

    Science.gov (United States)

    Ahn, Jeong-Taek; Jeong, Man-Bok; Park, Young-Woo; Kim, Se-Eun; Ahn, Jae-Sang; Lee, Yes-Ran; Lee, Eui-Ri; Seo, Kangmoon

    2012-03-01

    To compare and evaluate the accuracy of intraocular pressure (IOP) measured through a therapeutic contact lens, using applanation (TonoPen XL(®)) and rebound (TonoVet(®)) tonometers in enucleated dog eyes. A total of 30 enucleated eyes from 15 beagle dogs. To measure accurate IOP, the anterior chamber of each enucleated eye was cannulated with two 26-gauge needles and two polyethylene tubes were connected vertically to an adjustable reservoir bag of normal saline and a pressure transducer. IOP was measured by the TonoPen XL(®) followed by the TonoVet(®) without a contact lens. After a contact lens was applied to the cornea, IOP was re-measured in the same order. Three consecutive IOP measurements were performed using both tonometers. Without the contact lens, the IOP values obtained by both tonometers correlated well according to the regression analysis (TonoVet(®): γ(2) = 0.98, TonoPen XL(®): γ(2) = 0.97, P contact lens was applied to the cornea. Bland-Altman analysis was used to determine the lower and upper limits of agreement (TonoVet(®): -29.7 and +21.1 mmHg, TonoPen XL(®): -3.9 and +3.6 mmHg) between the two devices. This study suggests that the TonoPen XL(®) is a useful tonometer for dogs wearing therapeutic contact lenses, and importantly, contact lenses would not need to be removed prior to IOP measurement. © 2012 American College of Veterinary Ophthalmologists.

  16. A measurement-based performability model for a multiprocessor system

    Science.gov (United States)

    Ilsueh, M. C.; Iyer, Ravi K.; Trivedi, K. S.

    1987-01-01

    A measurement-based performability model based on real error-data collected on a multiprocessor system is described. Model development from the raw errror-data to the estimation of cumulative reward is described. Both normal and failure behavior of the system are characterized. The measured data show that the holding times in key operational and failure states are not simple exponential and that semi-Markov process is necessary to model the system behavior. A reward function, based on the service rate and the error rate in each state, is then defined in order to estimate the performability of the system and to depict the cost of different failure types and recovery procedures.

  17. Relating Standardized Visual Perception Measures to Simulator Visual System Performance

    Science.gov (United States)

    Kaiser, Mary K.; Sweet, Barbara T.

    2013-01-01

    Human vision is quantified through the use of standardized clinical vision measurements. These measurements typically include visual acuity (near and far), contrast sensitivity, color vision, stereopsis (a.k.a. stereo acuity), and visual field periphery. Simulator visual system performance is specified in terms such as brightness, contrast, color depth, color gamut, gamma, resolution, and field-of-view. How do these simulator performance characteristics relate to the perceptual experience of the pilot in the simulator? In this paper, visual acuity and contrast sensitivity will be related to simulator visual system resolution, contrast, and dynamic range; similarly, color vision will be related to color depth/color gamut. Finally, we will consider how some characteristics of human vision not typically included in current clinical assessments could be used to better inform simulator requirements (e.g., relating dynamic characteristics of human vision to update rate and other temporal display characteristics).

  18. Interlaboratory analytical performance studies; a way to estimate measurement uncertainty

    Directory of Open Access Journals (Sweden)

    El¿bieta £ysiak-Pastuszak

    2004-09-01

    Full Text Available Comparability of data collected within collaborative programmes became the key challenge of analytical chemistry in the 1990s, including monitoring of the marine environment. To obtain relevant and reliable data, the analytical process has to proceed under a well-established Quality Assurance (QA system with external analytical proficiency tests as an inherent component. A programme called Quality Assurance in Marine Monitoring in Europe (QUASIMEME was established in 1993 and evolved over the years as the major provider of QA proficiency tests for nutrients, trace metals and chlorinated organic compounds in marine environment studies. The article presents an evaluation of results obtained in QUASIMEME Laboratory Performance Studies by the monitoring laboratory of the Institute of Meteorology and Water Management (Gdynia, Poland in exercises on nutrient determination in seawater. The measurement uncertainty estimated from routine internal quality control measurements and from results of analytical performance exercises is also presented in the paper.

  19. Performance and some carcass measurements in starter broiler ...

    African Journals Online (AJOL)

    A 28 day feeding trial was conducted to investigate the performance and some carcass measurements in starter broiler birds fed sweet potato meal. Three hundred and five (305) Anak broilers of one week old were randomly assigned to five treatment diets. Diets 1, 2, 3, 4, and 5 contain 0, 2.5, 5.0, 7.5 and 10.0% levels of ...

  20. Analyze of the Measuring Performance for Artificially Business Intelligent Systems

    OpenAIRE

    Vatuiu, Teodora

    2007-01-01

    This paper analyzes the measuring performance of artificially business intelligent systems. Thousands of persons-years have been devoted to the research and development in the vari¬ous aspects of artificially intelligent systems. Much progress has been attained. However, there has been no means of evaluating the progress of the field. How can we assess the cur¬rent state of the science? Most of business intelligent systems are beginning to be deployed commercially. How can a commercial buyer ...

  1. Accounting for heterogeneity in the measurement of hospital performance

    OpenAIRE

    Philippe K. Widmer; Peter Zweifel; Mehdi Farsi

    2011-01-01

    With prospective payment of hospitals becoming more common, measuring their performance is gaining in importance. However, the standard cost frontier model yields biased efficiency scores because it ignores technological heterogeneity between hospitals. In this paper, efficiency scores are derived from a random intercept and an extended random parameter frontier model, designed to overcome the problem of unobserved heterogeneity in stochastic frontier analysis. Using a sample of 100 Swiss ...

  2. Aims and Formats of performance measurement at Danish Universities

    DEFF Research Database (Denmark)

    Raffnsøe-Møller, Morten

    2011-01-01

    Abstract This article traces the aims and formats of performance measurement of Danish Universities as they originate from the Ministry of Finance’s plan for governance of the public sector. The article further show that the fierce conflicts between central administration and the universities over...... and intelligent regimes – is used to propose a way out of the current governance impasse at the universities....

  3. Replacement of the in vivo neutralisation test for efficacy demonstration of tetanus vaccines ad us. vet.

    Science.gov (United States)

    Rosskopf, Ute; Noeske, Kerstin; Werner, Esther

    2005-01-01

    The bacterium Clostridium (C.) tetani is an ubiquitous pathogen. This anaerobic, gram-positive bacterium can form spores and can be found in the whole environment. It enters the body via injuries of the skin and wounds where it releases the neurotoxin "tetanospasmin" (= tetanus toxin). The animals most susceptible to tetanus infection are horses and sheep. Only active immunisation by tetanus vaccine provides effective protection against tetanus intoxication. The marketing authorisation requirements stipulate that efficacy of tetanus vaccines ad us. vet. must be demonstrated in all target animal species via determination of neutralising tetanus serum antitoxin concentrations. The standard method used for this purpose is still the toxin neutralisation test (TNT), as it quantifies the tetanus toxin-neutralising effect of tetanus serum antibodies in vivo. In this test, tetanus toxin is added to dilutions of serum from vaccinated horse and sheep. The serum dilutions are then administered to mice or guinea pigs, which are observed for toxic symptoms. Against the background of animal protection, the goal of one project of the Paul-Ehrlich-Institut (Bundesministerium fuer Bildung und Forschung (Federal Ministry for Education and Research), 0312636) was to establish an alternative to the toxin neutralisation test, enabling the testing of efficacy of tetanus vaccines with serological in vitro methods. For this purpose, a so-called double antigen ELISA (DAE) was established which enables the testing of sera of different species in one assay. In addition, the sera were tested in an indirect ELISA for horses and sheep separately. Altogether, ten groups of horses and eight groups of sheep were immunised with ten animals per group each. The tetanus vaccines comprised almost all products authorised for the German market at the start of the project. 564 horse sera and 257 sheep sera were tested using the two ELISA methods. Some sera were also tested in vivo. The kinetics of

  4. Women in Jordanian banks and performance: Financial accounting measurement

    Directory of Open Access Journals (Sweden)

    Muhannad Akram Ahmad

    2016-08-01

    Full Text Available This study highlights the gender diversity issues in the banking sector taking into consideration their impact on the performance measured by profitability (ROA. As the banking sector has widely been ignored from the previous studies due to their strict system, this study empirically examined the impact of the CEO gender and board with a female director on the performance of the Jordanian commercial banks in a period from 2004 to 2013. The multiple regression analysis shows that the banks with female CEOs underperform their counterparts run by male CEOs. The reason could be due to their harmonious relationships orientation; that is, women do not tend to invest in risky investments. However, female director plays insignificant roles on the performance which supports the evidence of tokenism as argued by the psychological social theory

  5. A programmable Gaussian random pulse generator for automated performance measurements

    International Nuclear Information System (INIS)

    Abdel-Aal, R.E.

    1989-01-01

    This paper describes a versatile random signal generator which produces logic pulses with a Gaussian distribution for the pulse spacing. The average rate at the pulse generator output can be software-programmed, which makes it useful in performing automated measurements of dead time and CPU time performance of data acquisition systems and modules over a wide range of data rates. Hardware and software components are described and data on the input-output characteristics and the statistical properties of the pulse generator are given. Typical applications are discussed together with advantages over using radioactive test sources. Results obtained from an automated performance run on a VAX 11/785 data acquisition system are presented. (orig.)

  6. Accreditation and the Development of Process Performance Measures

    DEFF Research Database (Denmark)

    Bie Bogh, Søren

    Accreditation is an external review process used to assess how well an organisation performs relative to established standards. Accreditation provides a framework for continuous quality improvement, and health services worldwide embrace accreditation and use it as a strategy to improve quality...... on quality of care using nationwide quantitative designs aimed at detecting changes over time in hospital performance in relation to both voluntary (Study 1) and mandatory accreditation (Study 2). Further, a qualitative study (Study 3) was conducted to complement the findings in Study 2. To examine...... was used to examine the mandatory accreditation programme. The quantitative study was a multilevel, longitudinal, stepped-wedge, nationwide study of process performance measures based on data from patients admitted for acute stroke, heart failure, ulcer, diabetes, breast cancer and lung cancer...

  7. Measuring the performance of mutual funds: A case study

    Directory of Open Access Journals (Sweden)

    Jakšić Milena

    2015-01-01

    Full Text Available In this paper we evaluate the performance of eight open-end mutual funds in the Republic of Serbia for the period 2009-2012, with the aim of testing the justification of active portfolio management of mutual funds, and determining the selection capability of Serbian portfolio managers. Risk-weighted returns of mutual funds are compared with the risk-weighted return of the leading Belgrade Stock Exchange index, Belex15, whereas the following are used as performance measures: Sharpe ratio (Si, Treynor ratio (Ti, and Jensen's or Alpha index (αi. The results suggest that the portfolio of Serbian mutual funds has inferior performance compared to the market portfolio, which indicates the lack of selection capabilities of domestic portfolio managers.

  8. Auditing emergency management programmes: Measuring leading indicators of programme performance.

    Science.gov (United States)

    Tomsic, Heather

    Emergency Management Programmes benefit from review and measurement against established criteria. By measuring current vs required programme elements for their actual currency, completeness and effectiveness, the resulting timely reports of achievements and documentation of identified gaps can effectively be used to rationally support prioritised improvement. Audits, with their detailed, triangulated and objectively weighted processes, are the ultimate approach in terms of programme content measurement. Although Emergency Management is often presented as a wholly separate operational mechanism, distinct and functionally different from the organisation's usual management structure, this characterisation is only completely accurate while managing an emergency itself. Otherwise, an organisation's Emergency Management Programme is embedded within that organisation and dependent upon it. Therefore, the organisation's culture and structure of management, accountability and measurement must be engaged for the programme to exist, much less improve. A wise and successful Emergency Management Coordinator does not let the separate and distinct nature of managing an emergency obscure their realisation of the need for an organisation to understand and manage all of the other programme components as part of its regular business practices. This includes its measurement. Not all organisations are sufficiently large or capable of supporting the use of an audit. This paper proposes that alternate, less formal, yet effective mechanisms can be explored, as long as they reflect and support organisational management norms, including a process of relatively informal measurement focused on the organisation's own perception of key Emergency Management Programme performance indicators.

  9. Design and experimentally measure a high performance metamaterial filter

    Science.gov (United States)

    Xu, Ya-wen; Xu, Jing-cheng

    2018-03-01

    Metamaterial filter is a kind of expecting optoelectronic device. In this paper, a metal/dielectric/metal (M/D/M) structure metamaterial filter is simulated and measured. Simulated results indicate that the perfect impedance matching condition between the metamaterial filter and the free space leads to the transmission band. Measured results show that the proposed metamaterial filter achieves high performance transmission on TM and TE polarization directions. Moreover, the high transmission rate is also can be obtained when the incident angle reaches to 45°. Further measured results show that the transmission band can be expanded through optimizing structural parameters. The central frequency of the transmission band is also can be adjusted through optimizing structural parameters. The physical mechanism behind the central frequency shifted is solved through establishing an equivalent resonant circuit model.

  10. Zone of Acceptance Under Performance Measurement: Does Performance Information Affect Employee Acceptance of Management Authority?

    DEFF Research Database (Denmark)

    Nielsen, Poul Aaes; Jacobsen, Christian Bøtcher

    2018-01-01

    Public sector employees have traditionally enjoyed substantial influence and bargaining power in organizational decision making, but few studies have investigated the formation of employee acceptance of management authority. Drawing on the “romance of leadership” perspective, the authors argue th...... that performance measurement can alter public sector authority relations and have implications regarding how public managers can use performance information strategically to gain acceptance of management authority and organizational change....

  11. Sources and performance criteria of uncertainty of reference measurement procedures.

    Science.gov (United States)

    Mosca, Andrea; Paleari, Renata

    2018-05-29

    This article wants to focus on the today available Reference Measurement Procedures (RMPs) for the determination of various analytes in Laboratory Medicine and the possible tools to evaluate their performance in the laboratories who are currently using them. A brief review on the RMPs has been performed by investigating the Joint Committee for Traceability in Laboratory Medicine (JCTLM) database. In order to evaluate their performances, we have checked the organization of three international ring trials, i.e. those regularly performed by the IFCC External Quality assessment scheme for Reference Laboratories in Laboratory Medicine (RELA), by the Center for Disease Control and Prevention (CDC) cholesterol network and by the IFCC Network for HbA 1c . Several RMPs are available through the JCTLM database, but the best way to collect information about the RMPs and their uncertainties is to look at the reference measurement service providers (RMS). This part of the database and the background on how to listed in the database is very helpful for the assessment of expanded uncertainty (MU) and performance in general of RMPs. Worldwide, 17 RMS are listed in the database, and for most of the measurands more than one RMS is able to run the relative RMPs, with similar expanded uncertainties. As an example, for a-amylase, 4 SP offer their services with MU between 1.6 and 3.3%. In other cases (such as total cholesterol, the U may span over a broader range, i.e. from 0.02 to 3.6%). With regard to the performance evaluation, the approach is often heterogenous, and it is difficult to compare the performance of laboratories running the same RMP for the same measurand if involved in more than one EQAS. The reference measurement services have been created to help laboratory professionals and manufacturers to implement the correct metrological traceability, and the JCTLM database is the only correct way to retrieve all the necessary important information to this end. Copyright © 2018

  12. Why do employees take more initiatives to improve their performance after co-developing performance measures? A field study

    NARCIS (Netherlands)

    Groen, B.A.C.; Wouters, M.J.F.; Wilderom, C.P.M.

    2012-01-01

    Performance measurements may stimulate employee initiatives to improve operational performance, especially when employees themselves participate in the development of their own departmental performance measures. Using the theory of planned behavior, we examine why this occurs in a beverage

  13. Why do employees take more initiatives to improve their performance after co-developing performance measures? A field study.

    NARCIS (Netherlands)

    Groen, B.A.C.; Wouters, Marc; Wilderom, Celeste P.M.

    2012-01-01

    Performance measurements may stimulate employee initiatives to improve operational performance, especially when employees themselves participate in the development of their own departmental performance measures. Using the theory of planned behavior, we examine why this occurs in a beverage

  14. Performance measurement systems, TQM, and multi-level firm performance: a person-organisation fit perspective

    OpenAIRE

    Wei, Jo-Ting; Chang, Yeun Wen; Zhang, Xiaoxiang; Wu, Hsin-Hung

    2017-01-01

    For firms implementing TQM, there is a need to redesign performance measurement systems (PMS). Innovated PMS ought to have measurement diversity in their structure with considering the spirit of TQM and emphasize the congruence of goals between employees and firms by adding the viewpoint of person-organisation fit (P-O fit). This paper adopts structural equation modeling (SEM) to examine Taiwanese manufacturing firms to study the association between the P-O fit of PMS and the implementation o...

  15. Reducing Uncertainty: Implementation of Heisenberg Principle to Measure Company Performance

    Directory of Open Access Journals (Sweden)

    Anna Svirina

    2015-08-01

    Full Text Available The paper addresses the problem of uncertainty reduction in estimation of future company performance, which is a result of wide range of enterprise's intangible assets probable efficiency. To reduce this problem, the paper suggests to use quantum economy principles, i.e. implementation of Heisenberg principle to measure efficiency and potential of intangible assets of the company. It is proposed that for intangibles it is not possible to estimate both potential and efficiency at a certain time point. To provide a proof for these thesis, the data on resources potential and efficiency from mid-Russian companies was evaluated within deterministic approach, which did not allow to evaluate probability of achieving certain resource efficiency, and quantum approach, which allowed to estimate the central point around which the probable efficiency of resources in concentrated. Visualization of these approaches was performed by means of LabView software. It was proven that for tangible assets performance estimation a deterministic approach should be used; while for intangible assets the quantum approach allows better quality of future performance prediction. On the basis of these findings we proposed the holistic approach towards estimation of company resource efficiency in order to reduce uncertainty in modeling company performance.

  16. Analysis of Illinois Home Performance with ENERGY STAR® Measure Packages

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Yee, S. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Brand, L. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States)

    2013-09-01

    Through the Chicagoland Single Family Housing Characterization and Retrofit Prioritization report, the Partnership for Advanced Residential Retrofit research team characterized 15 housing types in the Chicagoland region based on assessor data, utility billing history, and available data from prior energy efficiency programs. Within these 15 groups, a subset showed the greatest opportunity for energy savings based on BEopt Version 1.1 modeling of potential energy efficiency package options and the percent of the housing stock represented by each group. In this project, collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for the 15 housing types. Housing type, conditions, energy efficiency measures installed, and retrofit cost information were collected from 19 homes that participated in the Illinois Home Performance with ENERGY STAR program in 2012, representing eight of the characterized housing groups. Two were selected for further case study analysis to provide an illustration of the differences between optimal and actually installed measures. Taken together, these homes are representative of 34.8% of the Chicagoland residential building stock. In one instance, actual installed measures closely matched optimal recommended measures.

  17. DESIGNING COMPANY PERFORMANCE MEASUREMENT SYSTEM USING BALANCE SCORECARD APPROACH

    Directory of Open Access Journals (Sweden)

    Cecep Mukti Soleh

    2015-05-01

    Full Text Available This research aimed to design how to measure company performance by using balance scorecard approach in coal transportation services industry. Depth interview was used to obtain qualitative data determination of strategic objectives, key performance indicators, strategic initiatives, and in charge units for each balanced scorecard perspectives while the quantitative data were obtained from weighting through questionnaires and analyzed using paired comparison to get a perspective what mostly affected the performance of the company. To measure the achievement of corporate performance, each KPI used (1 the scoring system with the methods that higher is better, lower is better and precise is better; (2 traffic light system with the help of green, yellow, red for identification of target achievement. This research result shows that in the balance scorecard perspective, the most influences on the overall performance of the company include the customer's perspective (31%, financial perspective (29%, internal business processes (21%, learning, and growth 19%. Keywords: balance scorecard, paired comparison, coal transportation serviceABSTRAKPenelitian ini bertujuan untuk merancang pengukuran kinerja perusahaan dengan menggunakan pendekatan balance scorecard di industri jasa pengangkutan batu bara. Data kualitatif diperoleh melalui indepth interview digunakan untuk menentukan sasaran strategik, indikator kinerja utama, inisiatif strategi dan penanggungjawab setiap divisi setiap perspektif balance scorecard, sedangkan data kuantitatif digunakan untuk pembobotan melalui kuesioner dan dianalisis dengan menggunakan metode paired comparisson untuk mendapatkan perspektif yang paling berpengaruh terhadap kinerja perusahaan. Ukuran pencapaian kinerja perusahaan dari setiap KPI menggunakan; (1 scoring system dengan bantuan metode higher is better, lower is better dan precise is better;(2 traffic light system dengan menggunakan bantuan warna hijau, kuning, merah

  18. Dehydration and performance on clinical concussion measures in collegiate wrestlers.

    Science.gov (United States)

    Weber, Amanda Friedline; Mihalik, Jason P; Register-Mihalik, Johna K; Mays, Sally; Prentice, William E; Guskiewicz, Kevin M

    2013-01-01

    The effects of dehydration induced by wrestling-related weight-cutting tactics on clinical concussion outcomes, such as neurocognitive function, balance performance, and symptoms, have not been adequately studied. To evaluate the effects of dehydration on the outcome of clinical concussion measures in National Collegiate Athletic Association Division I collegiate wrestlers. Repeated-measures design. Clinical research laboratory. Thirty-two Division I healthy collegiate male wrestlers (age = 20.0 ± 1.4 years; height = 175.0 ± 7.5 cm; baseline mass = 79.2 ± 12.6 kg). Participants completed preseason concussion baseline testing in early September. Weight and urine samples were also collected at this time. All participants reported to prewrestling practice and postwrestling practice for the same test battery and protocol in mid-October. They had begun practicing weight-cutting tactics a day before prepractice and postpractice testing. Differences between these measures permitted us to evaluate how dehydration and weight-cutting tactics affected concussion measures. Sport Concussion Assessment Tool 2 (SCAT2), Balance Error Scoring System, Graded Symptom Checklist, and Simple Reaction Time scores. The Simple Reaction Time was measured using the Automated Neuropsychological Assessment Metrics. The SCAT2 measurements were lower at prepractice (P = .002) and postpractice (P < .001) when compared with baseline. The BESS error scores were higher at postpractice when compared with baseline (P = .015). The GSC severity scores were higher at prepractice (P = .011) and postpractice (P < .001) than at baseline and at postpractice when than at prepractice (P = .003). The number of Graded Symptom Checklist symptoms reported was also higher at prepractice (P = .036) and postpractice (P < .001) when compared with baseline, and at postpractice when compared with prepractice (P = .003). Our results suggest that it is important for wrestlers to be evaluated in a euhydrated state to

  19. Measuring the performance of G2G services in Iran

    Science.gov (United States)

    Zarei, Behrouz; Safdari, Maryam

    To highlight the growth of e-government and the importance of its services it is essential to evaluate the performance of the service delivery to customers. Research indicates that traditional performance indexes are not suitable for this evaluation; moreover, it is noticeable that the e-government services are intangible and invisible. Among different e-government services, measurement of quality government to government (G2G) services has been less attractive for researchers while crucial for government policy-makers. This calls for a better understanding of the specific needs of users of these services in order to provide appropriate type and level of services that meets those needs. In this paper, the performance of the G2G services is measured in the Iranian context. For this purpose, SERVQUAL, which is a well-known method for assessing service quality, is employed. This study proposes and tests a five-factor of SERVQUAL instrument to explain user satisfaction and gap analysis, between expectations and perceptions of its customers, consisting thirty ministries and main governmental organizations. Based on a Chi-square test, factor analysis, gap analysis and correlations, it is concluded the gap between expectations and perceptions of G2G customers is significant and customer satisfaction of G2G services is at low level.

  20. Subsurface Biogeochemical Research FY11 Second Quarter Performance Measure

    Energy Technology Data Exchange (ETDEWEB)

    Scheibe, Timothy D.

    2011-03-31

    The Subsurface Biogeochemical Research (SBR) Long Term Measure for 2011 under the Performance Assessment Rating Tool (PART) measure is to "Refine subsurface transport models by developing computational methods to link important processes impacting contaminant transport at smaller scales to the field scale." The second quarter performance measure is to "Provide a report on computational methods linking genome-enabled understanding of microbial metabolism with reactive transport models to describe processes impacting contaminant transport in the subsurface." Microorganisms such as bacteria are by definition small (typically on the order of a micron in size), and their behavior is controlled by their local biogeochemical environment (typically within a single pore or a biofilm on a grain surface, on the order of tens of microns in size). However, their metabolic activity exerts strong influence on the transport and fate of groundwater contaminants of significant concern at DOE sites, in contaminant plumes with spatial extents of meters to kilometers. This report describes progress and key findings from research aimed at integrating models of microbial metabolism based on genomic information (small scale) with models of contaminant fate and transport in aquifers (field scale).

  1. Performance Measurement and Management Promotion through Non-Financial Measures: A Management Accounting Perspective

    OpenAIRE

    Eisenberg, Paul

    2016-01-01

    The purpose of this paper is the discussion of non-financial performance measures that can be adopted in the management accounting function of business organisations. The study is important because it shows how organisational focus on non-financial measures can substantially enhance profitability, albeit being subject to cost constraints. To begin with, the evolution of management accounting research over the last three decades is resented. The development in the academia is then contra...

  2. The Multifactor Measure of Performance: Its Development, Norming, and Validation.

    Science.gov (United States)

    Bar-On, Reuven

    2018-01-01

    This article describes the development as well as the initial norming and validation of the Multifactor Measure of Performance™ (MMP™), which is a psychometric instrument that is designed to study, assess and enhance key predictors of human performance to help individuals perform at a higher level. It was created by the author, for the purpose of going beyond existing conceptual and psychometric models that often focus on relatively few factors that are purported to assess performance at school, in the workplace and elsewhere. The relative sparsity of multifactorial pre-employment assessment instruments exemplifies, for the author, one of the important reasons for developing the MMP™, which attempts to comprehensively evaluate a wider array of factors that are thought to contribute to performance. In that this situation creates a need in the area of test-construction that should be addressed, the author sought to develop a multifactorial assessment and development instrument that could concomitantly evaluate a combination of physical, cognitive, intra-personal, inter-personal, and motivational factors that significantly contribute to performance. The specific aim of this article is to show why, how and if this could be done as well as to present and discuss the potential importance of the results obtained to date. The findings presented here will hopefully add to what is known about human performance and thus contribute to the professional literature, in addition to contribute to the continued development of the MMP™. The impetus for developing the MMP™ is first explained below, followed by a detailed description of the process involved and the findings obtained; and their potential application is then discussed as well as the possible limitations of the present research and the need for future studies to address them.

  3. Performance measures for aging of nuclear power plants

    International Nuclear Information System (INIS)

    Ross, D.F. Jr.

    1993-01-01

    The Nuclear Power Plant licenses are granted by the US Nuclear Regulatory Commission (NRC) for a 40-year term. There is at present consideration being given to extending the authorized service lifetime beyond that, perhaps for a total of 60 or 70 years total. A logical concern for such a length of operation is whether the plant ages in such a way as to be significantly less safe as it gets older. As a corollary to this, there would be the question as to how to measure a diminution in plant safety. Each operating utility has, of course, ways to observe the plant performance. It has maintenance and surveillance programs which are used for this purpose. The NRC maintains a presence at each operating plant in the form of resident inspectors. The NRC also receives utility reports which may then be used to synthesize operating performance. It also reviews plant performance directly through what is known as the Systematic Assessment of Licensee Performance (SALP). In the paper the various data management programs used by the NRC will be described. The results of each program is presented, and observations are made as to the potential effect of age on safety performance. It is also necessary to define the size of the population being examined. There are at present 109 operating reactors. The age distribution is used to normalize the data. Some of the indicators discussed in this paper are concerned more with the indirect effect of aging, such as inadvertent shutdown. The regulated industry maintains a program known as the Nuclear Power Reliability Data System (NPRDS) to which the electric utilities participate in a voluntary manner. Data from NPRDS can be accessed to observe the direct aging effect; this is not covered in this paper. To the degree that plant operating staff learns how to cope with aging equipment and operate in a safe manner nonetheless, the performance indicators would not fully reflect the aging effect

  4. Performance and measurements of the AGS and Booster beams

    International Nuclear Information System (INIS)

    Weng, W.T.

    1995-01-01

    Analyses of Hot Gas Stream Cleanup (HGSC) ashes and descriptions of filter performance were made to address the problems with filter operation that are apparently linked to the collected ash. This task is designed to generate data base of the key properties of ashes collected from operating advanced particle filters and to relate these ash properties to the operation and performance of these filters. Activities including initial formatting of the data base and entry, modification of the permeability model, and initial design of a high-temperature test device for measuring uncompacted bulk porosity of ash aggregates (indicator of relative cohesivity of the ash, filter cake porosity/permeability). Chemical analyses of hopper and filter cake ashes from Tidd showed that the consolidation degree could not be accounted for by condensation/adsorption from the flue gas; the mechanism is likely physical rearrangement of the ash particles

  5. Measuring Human Performance within Computer Security Incident Response Teams

    Energy Technology Data Exchange (ETDEWEB)

    McClain, Jonathan T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva, Austin Ray [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Avina, Glory Emmanuel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Forsythe, James C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    Human performance has become a pertinen t issue within cyber security. However, this research has been stymied by the limited availability of expert cyber security professionals. This is partly attributable to the ongoing workload faced by cyber security professionals, which is compound ed by the limited number of qualified personnel and turnover of p ersonnel across organizations. Additionally, it is difficult to conduct research, and particularly, openly published research, due to the sensitivity inherent to cyber ope rations at most orga nizations. As an alternative, the current research has focused on data collection during cyb er security training exercises. These events draw individuals with a range of knowledge and experience extending from seasoned professionals to recent college gradu ates to college students. The current paper describes research involving data collection at two separate cyber security exercises. This data collection involved multiple measures which included behavioral performance based on human - machine transactions and questionnaire - based assessments of cyber security experience.

  6. Introducing care pathway commissioning to primary dental care: measuring performance.

    Science.gov (United States)

    Harris, R; Bridgman, C; Ahmad, M; Bowes, L; Haley, R; Saleem, S; Singh, R; Taylor, S

    2011-12-09

    Care pathways have been used in a variety of ways: firstly to support quality improvement through standardising clinical processes, but also for secondary purposes, by purchasers of healthcare, to monitor activity and health outcomes and to commission services. This paper focuses on reporting a secondary use of care pathways: to commission and monitor performance of primary dental care services. Findings of a project involving three dental practices implementing a system based on rating patients according to their risk of disease and need for care are outlined. Data from surgery-based clinical databases and interviews from commissioners and providers are reported. The use of both process and outcome key performance indicators in this context is discussed, as well as issues which arise such as attributability of outcome measures and strategic approaches to improving quality of care.

  7. Financial Indicators of Performance Measurement: Reality, Relevance and Distortion

    Directory of Open Access Journals (Sweden)

    Flavius-Andrei Guinea

    2016-01-01

    Full Text Available The main criticism brought to managers and to managerial accounting systems was the lack of emphasis on the return of the use of invested capital and the excessive focus on the efficiency of production processes. This fact forced the transition to a new view on the way of establishing the strategic objectives measured by financial indicators. The aim of this paper is to demonstrate, through case studies, the relevance and possibilities of manipulation of a series of indicators used for assessing performance: return on investment, residual profit, economic added value, commercial profitability. The relativity and the criticized appraisal of performance only through the means of profit were thought to be solved by implementing other indicators that would link several ingredients of profitability. The conclusions highlight that the remedy promoted by the new sets of financial indicators imposes a considerable cost, represented by the temptation of information distortion.

  8. Measurement-Based Performance Evaluation of Advanced MIMO Transceiver Designs

    Directory of Open Access Journals (Sweden)

    Schneider Christian

    2005-01-01

    Full Text Available This paper describes the methodology and the results of performance investigations on a multiple-input multiple-output (MIMO transceiver scheme for frequency-selective radio channels. The method relies on offline simulations and employs real-time MIMO channel sounder measurement data to ensure a realistic channel modeling. Thus it can be classified in between the performance evaluation using some predefined channel models and the evaluation of a prototype hardware in field experiments. New aspects for the simulation setup are discussed, which are frequently ignored when using simpler model-based evaluations. Example simulations are provided for an iterative ("turbo" MIMO equalizer concept. The dependency of the achievable bit error rate performance on the propagation characteristics and on the variation in some system design parameters is shown, whereas the antenna constellation is of particular concern for MIMO systems. Although in many of the considered constellations turbo MIMO equalization appears feasible in real field scenarios, there exist cases with poor performance as well, indicating that in practical applications link adaptation of the transmitter and receiver processing to the environment is necessary.

  9. Optimisation of key performance measures in air cargo demand management

    Directory of Open Access Journals (Sweden)

    Alexander May

    2014-04-01

    Full Text Available This article sought to facilitate the optimisation of key performance measures utilised for demand management in air cargo operations. The focus was on the Revenue Management team at Virgin Atlantic Cargo and a fuzzy group decision-making method was used. Utilising intelligent fuzzy multi-criteria methods, the authors generated a ranking order of ten key outcome-based performance indicators for Virgin Atlantic air cargo Revenue Management. The result of this industry-driven study showed that for Air Cargo Revenue Management, ‘Network Optimisation’ represents a critical outcome-based performance indicator. This collaborative study contributes to existing logistics management literature, especially in the area of Revenue Management, and it seeks to enhance Revenue Management practice. It also provides a platform for Air Cargo operators seeking to improve reliability values for their key performance indicators as a means of enhancing operational monitoring power.

  10. Performance Measurements in a High Throughput Computing Environment

    CERN Document Server

    AUTHOR|(CDS)2145966; Gribaudo, Marco

    The IT infrastructures of companies and research centres are implementing new technologies to satisfy the increasing need of computing resources for big data analysis. In this context, resource profiling plays a crucial role in identifying areas where the improvement of the utilisation efficiency is needed. In order to deal with the profiling and optimisation of computing resources, two complementary approaches can be adopted: the measurement-based approach and the model-based approach. The measurement-based approach gathers and analyses performance metrics executing benchmark applications on computing resources. Instead, the model-based approach implies the design and implementation of a model as an abstraction of the real system, selecting only those aspects relevant to the study. This Thesis originates from a project carried out by the author within the CERN IT department. CERN is an international scientific laboratory that conducts fundamental researches in the domain of elementary particle physics. The p...

  11. Performance measurement integrated information framework in e-Manufacturing

    Science.gov (United States)

    Teran, Hilaida; Hernandez, Juan Carlos; Vizán, Antonio; Ríos, José

    2014-11-01

    The implementation of Internet technologies has led to e-Manufacturing technologies becoming more widely used and to the development of tools for compiling, transforming and synchronising manufacturing data through the Web. In this context, a potential area for development is the extension of virtual manufacturing to performance measurement (PM) processes, a critical area for decision making and implementing improvement actions in manufacturing. This paper proposes a PM information framework to integrate decision support systems in e-Manufacturing. Specifically, the proposed framework offers a homogeneous PM information exchange model that can be applied through decision support in e-Manufacturing environment. Its application improves the necessary interoperability in decision-making data processing tasks. It comprises three sub-systems: a data model, a PM information platform and PM-Web services architecture. A practical example of data exchange for measurement processes in the area of equipment maintenance is shown to demonstrate the utility of the model.

  12. PERFORMANCE EVALUATION OF THERMOGRAPHIC CAMERAS FOR PHOTOGRAMMETRIC MEASUREMENTS

    Directory of Open Access Journals (Sweden)

    N. Yastikli

    2013-05-01

    Full Text Available The aim of this research is the performance evaluation of the termographic cameras for possible use for photogrammetric documentation and deformation analyses caused by moisture and isolation problem of the historical and cultural heritage. To perform geometric calibration of the termographic camera, the 3D test object was designed with 77 control points which were distributed in different depths. For performance evaluation, Flir A320 termographic camera with 320 × 240 pixels and lens with 18 mm focal length was used. The Nikon D3X SLR digital camera with 6048 × 4032 pixels and lens with 20 mm focal length was used as reference for comparison. The size of pixel was 25 μm for the Flir A320 termographic camera and 6 μm for the Nikon D3X SLR digital camera. The digital images of the 3D test object were recorded with the Flir A320 termographic camera and Nikon D3X SLR digital camera and the image coordinate of the control points in the images were measured. The geometric calibration parameters, including the focal length, position of principal points, radial and tangential distortions were determined with introduced additional parameters in bundle block adjustments. The measurement of image coordinates and bundle block adjustments with additional parameters were performed using the PHIDIAS digital photogrammetric system. The bundle block adjustment was repeated with determined calibration parameter for both Flir A320 termographic camera and Nikon D3X SLR digital camera. The obtained standard deviation of measured image coordinates was 9.6 μm and 10.5 μm for Flir A320 termographic camera and 8.3 μm and 7.7 μm for Nikon D3X SLR digital camera. The obtained standard deviation of measured image points in Flir A320 termographic camera images almost same accuracy level with digital camera in comparison with 4 times bigger pixel size. The obtained results from this research, the interior geometry of the termographic cameras and lens distortion was

  13. Performance Evaluation of Thermographic Cameras for Photogrammetric Measurements

    Science.gov (United States)

    Yastikli, N.; Guler, E.

    2013-05-01

    The aim of this research is the performance evaluation of the termographic cameras for possible use for photogrammetric documentation and deformation analyses caused by moisture and isolation problem of the historical and cultural heritage. To perform geometric calibration of the termographic camera, the 3D test object was designed with 77 control points which were distributed in different depths. For performance evaluation, Flir A320 termographic camera with 320 × 240 pixels and lens with 18 mm focal length was used. The Nikon D3X SLR digital camera with 6048 × 4032 pixels and lens with 20 mm focal length was used as reference for comparison. The size of pixel was 25 μm for the Flir A320 termographic camera and 6 μm for the Nikon D3X SLR digital camera. The digital images of the 3D test object were recorded with the Flir A320 termographic camera and Nikon D3X SLR digital camera and the image coordinate of the control points in the images were measured. The geometric calibration parameters, including the focal length, position of principal points, radial and tangential distortions were determined with introduced additional parameters in bundle block adjustments. The measurement of image coordinates and bundle block adjustments with additional parameters were performed using the PHIDIAS digital photogrammetric system. The bundle block adjustment was repeated with determined calibration parameter for both Flir A320 termographic camera and Nikon D3X SLR digital camera. The obtained standard deviation of measured image coordinates was 9.6 μm and 10.5 μm for Flir A320 termographic camera and 8.3 μm and 7.7 μm for Nikon D3X SLR digital camera. The obtained standard deviation of measured image points in Flir A320 termographic camera images almost same accuracy level with digital camera in comparison with 4 times bigger pixel size. The obtained results from this research, the interior geometry of the termographic cameras and lens distortion was modelled efficiently

  14. Methodology for performing measurements to release material from radiological control

    International Nuclear Information System (INIS)

    Durham, J.S.; Gardner, D.L.

    1993-09-01

    This report describes the existing and proposed methodologies for performing measurements of contamination prior to releasing material for uncontrolled use at the Hanford Site. The technical basis for the proposed methodology, a modification to the existing contamination survey protocol, is also described. The modified methodology, which includes a large-area swipe followed by a statistical survey, can be used to survey material that is unlikely to be contaminated for release to controlled and uncontrolled areas. The material evaluation procedure that is used to determine the likelihood of contamination is also described

  15. Improving Supply Chain Risk Management by Introducing Performance Measurement Systems

    OpenAIRE

    Ryding, Anna; Sahlin, Jonatan

    2013-01-01

    Supply chain risk management (SCRM) is a topic that gains more and more interest from both the academic and practitioner’s perspective. The reason for this is the increased complexity in the global supply chain (SC) networks and many managers do not realize the risks they build in their SC by the continuous search to cut cost and decrease tied up capital. One problem with SCRM is that it is hard to measure the performance of it and if it is really beneficial to work with it. The objective for...

  16. Predictive Measures of Locomotor Performance on an Unstable Walking Surface

    Science.gov (United States)

    Bloomberg, J. J.; Peters, B. T.; Mulavara, A. P.; Caldwell, E. E.; Batson, C. D.; De Dios, Y. E.; Gadd, N. E.; Goel, R.; Wood, S. J.; Cohen, H. S.; hide

    2016-01-01

    Locomotion requires integration of visual, vestibular, and somatosensory information to produce the appropriate motor output to control movement. The degree to which these sensory inputs are weighted and reorganized in discordant sensory environments varies by individual and may be predictive of the ability to adapt to novel environments. The goals of this project are to: 1) develop a set of predictive measures capable of identifying individual differences in sensorimotor adaptability, and 2) use this information to inform the design of training countermeasures designed to enhance the ability of astronauts to adapt to gravitational transitions improving balance and locomotor performance after a Mars landing and enhancing egress capability after a landing on Earth.

  17. Performance measures in the earth observations commercialization applications program

    Science.gov (United States)

    Macauley, Molly K.

    1996-03-01

    Performance measures in the Earth Observations Commercialization Application Program (EOCAP) are key to its success and include net profitability; enhancements to industry productivity through generic innovations in industry practices, standards, and protocols; and documented contributions to public policy governing the newly developing remote sensing industry. Because EOCAP requires company co-funding, both parties to the agreement (the government and the corporate partner) have incentives to pursue these goals. Further strengthening progress towards these goals are requirements for business plans in the company's EOCAP proposal, detailed scrutiny given these plans during proposal selection, and regularly documented progress reports during project implementation.

  18. On summary measure analysis of linear trend repeated measures data: performance comparison with two competing methods.

    Science.gov (United States)

    Vossoughi, Mehrdad; Ayatollahi, S M T; Towhidi, Mina; Ketabchi, Farzaneh

    2012-03-22

    The summary measure approach (SMA) is sometimes the only applicable tool for the analysis of repeated measurements in medical research, especially when the number of measurements is relatively large. This study aimed to describe techniques based on summary measures for the analysis of linear trend repeated measures data and then to compare performances of SMA, linear mixed model (LMM), and unstructured multivariate approach (UMA). Practical guidelines based on the least squares regression slope and mean of response over time for each subject were provided to test time, group, and interaction effects. Through Monte Carlo simulation studies, the efficacy of SMA vs. LMM and traditional UMA, under different types of covariance structures, was illustrated. All the methods were also employed to analyze two real data examples. Based on the simulation and example results, it was found that the SMA completely dominated the traditional UMA and performed convincingly close to the best-fitting LMM in testing all the effects. However, the LMM was not often robust and led to non-sensible results when the covariance structure for errors was misspecified. The results emphasized discarding the UMA which often yielded extremely conservative inferences as to such data. It was shown that summary measure is a simple, safe and powerful approach in which the loss of efficiency compared to the best-fitting LMM was generally negligible. The SMA is recommended as the first choice to reliably analyze the linear trend data with a moderate to large number of measurements and/or small to moderate sample sizes.

  19. Classroom Composition and Measured Teacher Performance: What Do Teacher Observation Scores Really Measure?

    Science.gov (United States)

    Steinberg, Matthew P.; Garrett, Rachel

    2016-01-01

    As states and districts implement more rigorous teacher evaluation systems, measures of teacher performance are increasingly being used to support instruction and inform retention decisions. Classroom observations take a central role in these systems, accounting for the majority of teacher ratings upon which accountability decisions are based.…

  20. Model Engine Performance Measurement From Force Balance Instrumentation

    Science.gov (United States)

    Jeracki, Robert J.

    1998-01-01

    A large scale model representative of a low-noise, high bypass ratio turbofan engine was tested for acoustics and performance in the NASA Lewis 9- by 15-Foot Low-Speed Wind Tunnel. This test was part of NASA's continuing Advanced Subsonic Technology Noise Reduction Program. The low tip speed fan, nacelle, and an un-powered core passage (with core inlet guide vanes) were simulated. The fan blades and hub are mounted on a rotating thrust and torque balance. The nacelle, bypass duct stators, and core passage are attached to a six component force balance. The two balance forces, when corrected for internal pressure tares, measure the total thrust-minus-drag of the engine simulator. Corrected for scaling and other effects, it is basically the same force that the engine supports would feel, operating at similar conditions. A control volume is shown and discussed, identifying the various force components of the engine simulator thrust and definitions of net thrust. Several wind tunnel runs with nearly the same hardware installed are compared, to identify the repeatability of the measured thrust-minus-drag. Other wind tunnel runs, with hardware changes that affected fan performance, are compared to the baseline configuration, and the thrust and torque effects are shown. Finally, a thrust comparison between the force balance and nozzle gross thrust methods is shown, and both yield very similar results.

  1. Performance measurement of supply chain flexibility using witness

    Directory of Open Access Journals (Sweden)

    Rituraj Chandrakar

    2012-10-01

    Full Text Available In today’s global scenario of intense competition and environmental uncertainty flexibility in supply chain has an important role to play for the existence of any supply chain business. A need to be responsive to the constantly changing market scenario and cater to the customer needs, a certain degree of flexibility is required, which requires the coordination of many plants to produce and deliver goods to customers located in different places, and suppliers, which provide each plant with the required components. This paper intends to measure the degree of flexibility required for a two stage supply chain and assessing both the supplier flexibility and the assembler flexibility. In this paper, nine configurations of the SC are considered resulting from the combination of the three degrees of supplier and manufacturer flexibility, i.e. no flexibility, limited flexibility and total flexibility, respectively. Simulation model representing the different flexibility configurations are evaluated and the performance of each configuration analyzed to determine the flexibility configuration suitable to a supply chain. In particular the performance analysis of lead time, work-in-process, service level and cost are measured to determine the suitable flexibility.

  2. Centroid vetting of transiting planet candidates from the Next Generation Transit Survey

    Science.gov (United States)

    Günther, Maximilian N.; Queloz, Didier; Gillen, Edward; McCormac, James; Bayliss, Daniel; Bouchy, Francois; Walker, Simon. R.; West, Richard G.; Eigmüller, Philipp; Smith, Alexis M. S.; Armstrong, David J.; Burleigh, Matthew; Casewell, Sarah L.; Chaushev, Alexander P.; Goad, Michael R.; Grange, Andrew; Jackman, James; Jenkins, James S.; Louden, Tom; Moyano, Maximiliano; Pollacco, Don; Poppenhaeger, Katja; Rauer, Heike; Raynard, Liam; Thompson, Andrew P. G.; Udry, Stéphane; Watson, Christopher A.; Wheatley, Peter J.

    2017-11-01

    The Next Generation Transit Survey (NGTS), operating in Paranal since 2016, is a wide-field survey to detect Neptunes and super-Earths transiting bright stars, which are suitable for precise radial velocity follow-up and characterization. Thereby, its sub-mmag photometric precision and ability to identify false positives are crucial. Particularly, variable background objects blended in the photometric aperture frequently mimic Neptune-sized transits and are costly in follow-up time. These objects can best be identified with the centroiding technique: if the photometric flux is lost off-centre during an eclipse, the flux centroid shifts towards the centre of the target star. Although this method has successfully been employed by the Kepler mission, it has previously not been implemented from the ground. We present a fully automated centroid vetting algorithm developed for NGTS, enabled by our high-precision autoguiding. Our method allows detecting centroid shifts with an average precision of 0.75 milli-pixel (mpix), and down to 0.25 mpix for specific targets, for a pixel size of 4.97 arcsec. The algorithm is now part of the NGTS candidate vetting pipeline and automatically employed for all detected signals. Further, we develop a joint Bayesian fitting model for all photometric and centroid data, allowing to disentangle which object (target or background) is causing the signal, and what its astrophysical parameters are. We demonstrate our method on two NGTS objects of interest. These achievements make NGTS the first ground-based wide-field transit survey ever to successfully apply the centroiding technique for automated candidate vetting, enabling the production of a robust candidate list before follow-up.

  3. Description of the TCERT Vetting Reports for Data Release 25

    Science.gov (United States)

    Van Cleve, Jeffrey E.; Caldwell, Douglas A.

    2016-01-01

    This document, the Kepler Instrument Handbook (KIH), is for Kepler and K2 observers, which includes the Kepler Science Team, Guest Observers (GOs), and astronomers doing archival research on Kepler and K2 data in NASAs Astrophysics Data Analysis Program (ADAP). The KIH provides information about the design, performance, and operational constraints of the Kepler flight hardware and software, and an overview of the pixel data sets available. The KIH is meant to be read with these companion documents:1. Kepler Data Processing Handbook (KSCI-19081) or KDPH (Jenkins et al., 2016). The KDPH describes how pixels downlinked from the spacecraft are converted by the Kepler Data Processing Pipeline (henceforth just the pipeline) into the data products delivered to the MAST archive. 2. Kepler Archive Manual (KDMC-10008) or KAM (Thompson et al., 2016). The KAM describes the format and content of the data products, and how to search for them.3. Kepler Data Characteristics Handbook (KSCI-19040) or KDCH (Christiansen et al., 2016). The KDCH describes recurring non-astrophysical features of the Kepler data due to instrument signatures, spacecraft events, or solar activity, and explains how these characteristics are handled by the pipeline.4. Kepler Data Release Notes 25 (KSCI-19065) or DRN 25 (Thompson et al., 2015). DRN 25 describes signatures and events peculiar to individual quarters, and the pipeline software changes between a data release and the one preceding it.Together, these documents supply the information necessary for obtaining and understanding Kepler results, given the real properties of the hardware and the data analysis methods used, and for an independent evaluation of the methods used if so desired.

  4. A Hybrid Fuzzy Model for Lean Product Development Performance Measurement

    Science.gov (United States)

    Osezua Aikhuele, Daniel; Mohd Turan, Faiz

    2016-02-01

    In the effort for manufacturing companies to meet up with the emerging consumer demands for mass customized products, many are turning to the application of lean in their product development process, and this is gradually moving from being a competitive advantage to a necessity. However, due to lack of clear understanding of the lean performance measurements, many of these companies are unable to implement and fully integrated the lean principle into their product development process. Extensive literature shows that only few studies have focus systematically on the lean product development performance (LPDP) evaluation. In order to fill this gap, the study therefore proposed a novel hybrid model based on Fuzzy Reasoning Approach (FRA), and the extension of Fuzzy-AHP and Fuzzy-TOPSIS methods for the assessment of the LPDP. Unlike the existing methods, the model considers the importance weight of each of the decision makers (Experts) since the performance criteria/attributes are required to be rated, and these experts have different level of expertise. The rating is done using a new fuzzy Likert rating scale (membership-scale) which is designed such that it can address problems resulting from information lost/distortion due to closed-form scaling and the ordinal nature of the existing Likert scale.

  5. Measuring the impact of HRM on organizational performance

    Directory of Open Access Journals (Sweden)

    Anastasia A. Katou

    2008-12-01

    Full Text Available Normal 0 21 false false false ES ZH-CN X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman","serif"; mso-ansi-language:ES-TRAD; mso-fareast-language:EN-US;} The purpose of this paper is to measure the impact of HRM on organisational performance in the context of Greece. Data were collected from 178 organisations using a questionnaire survey in the Greek manufacturing sector, and analysed using the ‘structural equation modelling’ methodology. The results indicated that the relationship between HRM policies (resourcing and development, compensation and incentives, involvement and job design and organisational performance is partially mediated through HRM outcomes (skills, attitudes, behaviour, and it is influenced by business strategies (cost, quality, innovation. Thus, the contribution of this study for academics and practitioners is that HRM policies associated with business strategies will affect organisational performance through HRM outcomes.

  6. Analysis of ESG indicators for measuring enterprise performance

    Directory of Open Access Journals (Sweden)

    Zuzana Chvátalová

    2013-01-01

    Full Text Available In this article authors focus on the analysis of the whole set of environmental, social and corporate governance (ESG indicators for the elimination of double or triple effects within the next construction of methods for measuring corporate performance. They build on their previously published results (in Acta univ. agric. et silvic. Mendel. Brun., 2012. The partial actual selected results of a recently undertaken currently project entitled ‘Construction of Methods for Multifactorial Assessment of Company Complex Performance in Selected Sectors’ were used. This project was solved the research teams of the Faculty of Business and Management of Brno University Technology and Faculty of Business and Economics of Mendel University in Brno since 2011. Further theoretical resources in the environmental, social and corporate governance area, known indicator databases (namely Global Reporting Initiative, comparative analysis, resp. syntheses for identifying possible of common indicator properties were identified to classify indicator subsets to preclude double or even triple effect based on mathematical set theory (Venn diagrams. The indicator analysis in constructed multi-factorial methods contributes to precise decision making in management to improve corporate performance.

  7. Measuring performance improvement: total organizational commitment or clinical specialization.

    Science.gov (United States)

    Caron, Aleece; Jones, Paul; Neuhauser, Duncan; Aron, David C

    2004-01-01

    Resources for hospitals are limited when they are faced with multiple publicly reported performance measures as tools to assess quality. The leadership in these organizations may choose to focus on 1 or 2 of these outcomes. An alternative approach is that the leadership may commit resources or create conditions that result in improved quality over a broad range of measures. We used aggregated data on mortality, length of stay, and obstetrical outcomes from Greater Cleveland Health Quality Choice data to test these theories. We used Pearson correlation analysis to determine of outcomes were correlated with one another. We used repeated-measures ANOVA to determine if an association existed between outcome and time and outcome and hospital. All of the outcomes across all hospitals demonstrate a trend of overall improvement. Both the Pearson and ANOVA result support the hypothesis for the organization-wide approach to quality improvement. Hospital that make improvements in one clinical area trend to make improvements in others. Hospitals that produce improvements in limited clinical or administrative areas may not have completely adopted CQI into their culture or may not have yet realized the benefits of their organizational commitments, but use some of the concepts to improve quality outcomes.

  8. Śvetāmbara Jain Canonical Commentators Writing in Sanskrit

    Directory of Open Access Journals (Sweden)

    Royce WILES

    2013-04-01

    Full Text Available Jain commentaries in Sanskrit are vital for an understanding of the old Jain religious texts in Prakrit, the commentaries date from the 8th to 13th century. The major commentators are well-known in name but as yet there has not been any sustained research on their works. This article attempts to provide an initial reference point by listing (for the first time all known published editions of Jain commentaries in Sanskrit on the Śvetāmbara canon by Śīlaṅka (9th century, Abhayadeva (10th century and Malayagiri (10th –11th century.

  9. SOFT POWER: TRAINING OF VET TEACHERS AND TRAINERS (RESULTS OF THE RUSSIAN-GERMAN COOPERATION

    Directory of Open Access Journals (Sweden)

    E. Yu. Esenina

    2017-01-01

    Full Text Available Introduction. Nowadays, in Russia the system of interaction between educational institutions and enterprises-employers in training of specialists is being built again after more than a twenty-year period of dissociation. Sharing experiences with other countries on networking and strengthening of education relations with production is very useful for establishing this process. The aim of the publication is to present the results of the Russian-German cooperation in the field of preparation of the qualified pedagogical staff for the system of vocational education as one of the key conditions for ensuring the proper quality of vocational education. Methodology and research methods. The methods involve the methodology of comparative research; methods of collecting empirical information; conceptual and terminological analysis, interpretation, modeling, and problem method. Results. The approaches to preparation of pedagogical staff of the VET system in Germany and Russia are revealed and compared. Specifics of the German model are shown: existence of several skill levels of teachers of vocational education, distribution of zones of their responsibility, variability of providers of additional education, its market nature and minimum participation in its regulation of the state. Features of the modern Russian theory and training experience of instructors of vocational training are described. Despite the existing distinctions of systems of professional education of two countries, the similarity of the Russian and German methods of vocational education is observed. The conclusion is drawn on a community of requirements imposed in Germany and Russia to category of the workers who are carrying out staff training for manufacturing sectors. It is confirmed by the German experts on the basis of the analysis of the standard «Teacher of Vocational Education, Professional Education and Additional Professional Education». Also, the standard was checked and

  10. Resources on work zone safety and mobility performance monitoring and measurement.

    Science.gov (United States)

    2013-01-01

    Work zone performance measures are metrics that help quantify how work zones impact travelers, residents, businesses, and workers. Some performance measures describe how an individual work zone impacts these audiences; other performance measures desc...

  11. Developing safety performance functions incorporating reliability-based risk measures.

    Science.gov (United States)

    Ibrahim, Shewkar El-Bassiouni; Sayed, Tarek

    2011-11-01

    Current geometric design guides provide deterministic standards where the safety margin of the design output is generally unknown and there is little knowledge of the safety implications of deviating from these standards. Several studies have advocated probabilistic geometric design where reliability analysis can be used to account for the uncertainty in the design parameters and to provide a risk measure of the implication of deviation from design standards. However, there is currently no link between measures of design reliability and the quantification of safety using collision frequency. The analysis presented in this paper attempts to bridge this gap by incorporating a reliability-based quantitative risk measure such as the probability of non-compliance (P(nc)) in safety performance functions (SPFs). Establishing this link will allow admitting reliability-based design into traditional benefit-cost analysis and should lead to a wider application of the reliability technique in road design. The present application is concerned with the design of horizontal curves, where the limit state function is defined in terms of the available (supply) and stopping (demand) sight distances. A comprehensive collision and geometric design database of two-lane rural highways is used to investigate the effect of the probability of non-compliance on safety. The reliability analysis was carried out using the First Order Reliability Method (FORM). Two Negative Binomial (NB) SPFs were developed to compare models with and without the reliability-based risk measures. It was found that models incorporating the P(nc) provided a better fit to the data set than the traditional (without risk) NB SPFs for total, injury and fatality (I+F) and property damage only (PDO) collisions. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Changes in Handset Performance Measures due to Spherical Radiation Pattern Measurement Uncertainty

    DEFF Research Database (Denmark)

    Nielsen, Jesper Ødum; Pedersen, Gert Frølund

    An important characteristic of a mobile handset is its ability to receive and transmit power. One way to characterize the performance of a handset in this respect is to use measurements of the spherical radiation pattern from which the total radiated power (TRP), total isotropic sensitivity (TIS)...... with respect to the environment. Standard deviations up to about 0.5dB and a maximum deviation of about 1.6dB were found....... in the performance measures are investigated for both the GSM-900 and the GSM-1800 band. Despite the deliberately large deviations from the reference position, the changes in TRP and TIS are generally within ±0.5dB with a maximum of about 1.4dB. For the MEG values the results depend on the orientation of the handset...... system that may introduce errors in standardized performance measurements. Radiation patterns of six handsets have been measured while they were mounted at various offsets from the reference position defined by the Cellular Telecommunications & Internet Association (CTIA) certification. The change...

  13. Electron Identification Performance and First Measurement of $W \\to e + \

    CERN Document Server

    Ueno, Rynichi

    2010-01-01

    The identification of electrons is important for the ATLAS experiment because electrons are present in many interactions of interest produced at the Large Hadron Collider. A deep knowledge of the detector, the electron identification algorithms, and the calibration techniques are crucial in order to accomplish this task. This thesis work presents a Monte Carlo study using electrons from the W —> e + v process to evaluate the performance of the ATLAS electromagnetic calorimeter. A significant number of electrons was produced in the early ATLAS collision runs at centre-of-mass energies of 900 GeV and 7 TeV between November 2009 and April 2010, and their properties are presented. Finally, a first measurement of W —> e + v process with the ATLAS experiment was successfully accomplished with the first C = 1.0 nb_ 1 of data at the 7 TeV collision energy, and the properties of the W candidates are also detailed.

  14. Performance Measurement of Mining Equipments by Utilizing OEE

    Directory of Open Access Journals (Sweden)

    Sermin Elevli

    2010-10-01

    Full Text Available Over the past century, open pit mines have steadily increased their production rate by using larger equipments which requireintensive capital investment. Low commodity prices have forced companies to decrease their unit cost by improving productivity. Oneway to improve productivity is to utilize equipment as effectively as possible. Therefore, the accurate estimation of equipmenteffectiveness is very important so that it can be increased. Overall Equipment Effectiveness (OEE is a well-known measurementmethod, which combines availability, performance and quality, for the evaluation of equipment effectiveness in manufacturing industry.However, there isn’t any study in literature about how to use this metric for mining equipments such as shovel, truck, drilling machineetc. This paper will discuss the application of OEE to measure effectiveness of mining equipment. It identifies causes of time losses forshovel and truck operations and introduces procedure to record time losses. The procedure to estimate OEE of shovels and trucks hasalso been presented via numerical example.

  15. Application Of Quality Function Deployment (QFD) To Measure Performance

    International Nuclear Information System (INIS)

    Fazila Said; Mohd Amirul Shafiq Shafiee; Nurul Hasanah Mohd Abd Basir

    2014-01-01

    This study aims to measure service quality performance and identify critical service quality characteristics as perceived by the customers. An integrated results survey that conducted by seven service centers that certified with Quality Management System (QMS) in Nuclear Malaysia are analysed. This is followed by constructing House of Quality (HoQ) and identifying other parameters for the Quality Function Deployment (QFD) matrix. HoQ is a simple and attractive service innovation tool which can be used to directly show comprehensive information which contained the voice of customer (VOC), technical response, technical correlation and matrix relationship. This study revealed that the information's from HoQ with further discussion on planning part which can be used to assist management in knowing the overall detail information of service center achievement and recognizes the solution for unsatisfied customer through priority improvement activity to enhance the customer satisfaction in future. (author)

  16. Integrating patient satisfaction into performance measurement to meet improvement challenges.

    Science.gov (United States)

    Smith, J E; Fisher, D L; Endorf-Olson, J J

    2000-05-01

    A Value Compass has been proposed to guide health care data collection. The "compass corners" represent the four types of data needed to meet health care customer expectations: appropriate clinical outcomes, improved functional status, patient satisfaction, and appropriate costs. Collection of all four types of data is necessary to select processes in need of improvement, guide improvement teams, and monitor the success of improvement efforts. INTEGRATED DATA AT BRYANLGH: BryanLGH Medical Center in Lincoln, Nebraska, has adopted multiple performance measurement systems to collect clinical outcome, financial, and patient satisfaction data into integrated databases. Data integration allows quality professionals at BryanLGH to identify quality issues from multiple perspectives and track the interrelated effects of improvement efforts. A CASE EXAMPLE: Data from the fourth quarter of 1997 indicated the need to improve processes related to cesarean section (C-section) deliveries. An interdisciplinary team was formed, which focused on educating nurses, physicians, and the community about labor support measures. Physicians were given their own rates of C-section deliveries. The C-section rate decreased from 27% to 19%, but per-case cost increased. PickerPLUS+ results indicated that BryanLGH obstetric patients reported fewer problems with receiving information than the Picker norm, but they reported more problems with the involvement of family members and friends. The data collected so far have indicated a decrease in the C-section rate and a need to continue to work on cost and psychosocial issues. A complete analysis of results was facilitated by integrated performance management systems. Successes have been easily tracked over time, and the need for further work on related processes has been clearly identified.

  17. Methodologies for Measuring Judicial Performance: The Problem of Bias

    Directory of Open Access Journals (Sweden)

    Jennifer Elek

    2014-12-01

    Full Text Available Concerns about gender and racial bias in the survey-based evaluations of judicial performance common in the United States have persisted for decades. Consistent with a large body of basic research in the psychological sciences, recent studies confirm that the results from these JPE surveys are systematically biased against women and minority judges. In this paper, we explain the insidious manner in which performance evaluations may be biased, describe some techniques that may help to reduce expressions of bias in judicial performance evaluation surveys, and discuss the potential problem such biases may pose in other common methods of performance evaluation used in the United States and elsewhere. We conclude by highlighting the potential adverse consequences of judicial performance evaluation programs that rely on biased measurements. Durante décadas ha habido una preocupación por la discriminación por género y racial en las evaluaciones del rendimiento judicial basadas en encuestas, comunes en Estados Unidos. De acuerdo con un gran corpus de investigación básica en las ciencias psicológicas, estudios recientes confirman que los resultados de estas encuestas de evaluación del rendimiento judicial están sistemáticamente sesgados contra las mujeres y los jueces de minorías. En este artículo se explica la manera insidiosa en que las evaluaciones de rendimiento pueden estar sesgadas, se describen algunas técnicas que pueden ayudar a reducir las expresiones de sesgo en los estudios de evaluación del rendimiento judicial, y se debate el problema potencial que estos sesgos pueden plantear en otros métodos comunes de evaluación del rendimiento utilizados en Estados Unidos y otros países. Se concluye destacando las posibles consecuencias adversas de los programas de evaluación del rendimiento judicial que se basan en mediciones sesgadas. DOWNLOAD THIS PAPER FROM SSRN: http://ssrn.com/abstract=2533937

  18. Measuring the relative performance of stock market using TOPSIS

    Directory of Open Access Journals (Sweden)

    Abolfazl Danaei

    2013-01-01

    Full Text Available For many years, investors used some basic financial ratios to measure the relative performance of various active industries based on two-digit ISIC classification. However, direct implementation of basic financial figures may not be practical in today's business environment since investors face with different criteria. The proposed model of this paper uses Technique for Order Preference by Similarity to Ideal Solution (TOPSIS to compare 37 various industries based on different financial figures. We gather the necessary data over the period of 2009-2010 from Tehran Stock Exchange and investigate the data in two stages. In the first stage, we perform fundamental analysis to select the most appropriate firms and the in the second stage, we use TOPSIS to rank selected firms based on different criteria. The results of the study confirm that information and communication technology, which is one of the biggest firms in this exchange is considered as the best option (relative ranking 0.88 in two years followed by some Cement industry (with relative ranking of 0.26 in 2009 and 0.19 in 2010 and oil refinery units (with relative ranking of 0.23 in 2009 and 0.19 in 2010. The figure also shows that other firms maintain low ratios varied from 0.23 to 0.01. The lowest industry ranking belongs to marine industry.

  19. Verifax: Biometric instruments measuring neuromuscular disorders/performance impairments

    Science.gov (United States)

    Morgenthaler, George W.; Shrairman, Ruth; Landau, Alexander

    1998-01-01

    VeriFax, founded in 1990 by Dr. Ruth Shrairman and Mr. Alex Landau, began operations with the aim of developing a biometric tool for the verification of signatures from a distance. In the course of developing this VeriFax Autograph technology, two other related applications for the technologies under development at VeriFax became apparent. The first application was in the use of biometric measurements as clinical monitoring tools for physicians investigating neuromuscular diseases (embodied in VeriFax's Neuroskill technology). The second application was to evaluate persons with critical skills (e.g., airline pilots, bus drivers) for physical and mental performance impairments caused by stress, physiological disorders, alcohol, drug abuse, etc. (represented by VeriFax's Impairoscope prototype instrument). This last application raised the possibility of using a space-qualified Impairoscope variant to evaluate astronaut performance with respect to the impacts of stress, fatigue, excessive workload, build-up of toxic chemicals within the space habitat, etc. The three applications of VeriFax's patented technology are accomplished by application-specific modifications of the customized VeriFax software. Strong commercial market potentials exist for all three VeriFax technology applications, and market progress will be presented in more detail below.

  20. Positive associations between physical and cognitive performance measures in fibromyalgia.

    Science.gov (United States)

    Cherry, Barbara J; Zettel-Watson, Laura; Chang, Jennifer C; Shimizu, Renee; Rutledge, Dana N; Jones, C Jessie

    2012-01-01

    To investigate the associations between perceived physical function (self-report) and physical and cognitive performance (objective assessments) in persons with fibromyalgia (FM). Correlational study. Exercise testing laboratory in Southern California. Community-residing ambulatory adults meeting the American College of Rheumatology 1990 criteria for FM (N=68; mean age, 59.5y). Not applicable. Composite Physical Function scale, Senior Fitness Test (3 items), Fullerton Advanced Balance scale, 30-foot walk, Trail Making Test parts A and B, Digit Symbol Substitution Test, a composite score of these 3 cognitive measures, attention/executive function composite, processing speed composite, problem solving, inhibition, and episodic memory composite. Hierarchical regression analyses showed that after controlling for age and FM symptoms, better physical performance (based on assessments, not self-report) was associated with higher cognitive function in attention/executive function, processing speed, problem solving, and inhibition. Researchers should continue to investigate the relationship between physical and cognitive function in both clinical and nonclinical populations, as well as explore changes across time. Because physical activity has been associated with neural improvements, further research may identify whether particular mechanisms, such as neurogenesis, synaptogenesis, or changes in inflammatory marker levels, are involved. Copyright © 2012 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  1. THE DEVELOPMENT OF A PERFORMANCE MEASUREMENT SYSTEM FOR MAINTENANCE

    Directory of Open Access Journals (Sweden)

    J.K. Visser

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Business enterprises are under increasing pressure to become internationally competitive due to globalisation. World-class companies from abroad can now easily compete with local companies, introducing high quality products and services to the local community and industry. The pace of technological change is also forcing companies to increase productivity and to become more cost effective. Performance management is part of the strategic management process in the business enterprise and the maintenance department therefore has to address this as part of the strategy formulation for the maintenance function. This paper outlines the strategic management process that is required in the maintenance department and defines a systematic process to develop a performance measurement system for maintenance.

    AFRIKAANSE OPSOMMING: Besigheidsondernemings is onder toenemende druk om internasionaal kompeterend te word weens globalisering. Wêreldklas maatskappye kan nou maklik met plaaslike maatskappye meeding deur hoë kwaliteit produkte en dienste aan die plaaslike gemeenskap en nywerheid te lewer. Die tempo van tegnologiese verandering dwing maatskappye ook om produktiwiteit te verhoog en meer koste-effektief te word. Prestasiebestuur is deel van strategiese bestuur in 'n onderneming en die instandhoudingsafdeling moet derhalwe prestasiebestuur aanspreek as deel van die ontwikkeling van strategie vir die instandhoudingsfunksie. Hierdie artikel bespreek die strategiese bestuursproses soos benodig in die instandhoudingsafdeling en stel 'n sistematiese proses voor vir die ontwikkeling van 'n prestasiemetingstelsel vir instandhouding.

  2. Perform Thermodynamics Measurements on Fuel Cycle Case Study Systems

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Leigh R. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    This document was prepared to meet FCR&D level 3 milestone M3FT-14IN0304022, “Perform Thermodynamics Measurements on Fuel Cycle Case Study Systems.” This work was carried out under the auspices of the Thermodynamics and Kinetics FCR&D work package. This document reports preliminary work in support of determining the thermodynamic parameters for the ALSEP process. The ALSEP process is a mixed extractant system comprised of a cation exchanger 2-ethylhexyl-phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and a neutral solvating extractant N,N,N’,N’-tetraoctyldiglycolamide (TODGA). The extractant combination produces complex organic phase chemistry that is challenging for traditional measurement techniques. To neutralize the complexity, temperature dependent solvent extraction experiments were conducted with neat TODGA and scaled down concentrations of the ALSEP formulation to determine the enthalpies of extraction for the two conditions. A full set of thermodynamic data for Eu, Am, and Cm extraction by TODGA from 3.0 M HNO3 is reported. These data are compared to previous extraction results from a 1.0 M HNO3 aqueous medium, and a short discussion of the mixed HEH[EHP]/TODGA system results is offered.

  3. Measured Performance of a Low Temperature Air Source Heat Pump

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, R. K. [Johnson Research LLC, Pueblo West, CO (United States)

    2013-09-01

    A 4-ton Low Temperature Heat Pump (LTHP) manufactured by Hallowell International was installed in a residence near New Haven, Connecticut and monitored over two winters of operation. After attending to some significant service issues, the heat pump operated as designed. This report should be considered a review of the dual compressor 'boosted heat pump' technology. The Low Temperature Heat Pumpsystem operates with four increasing levels of capacity (heat output) as the outdoor temperature drops. The system was shown to select capacity correctly, supplying the appropriate amount of heat to the house across the full range of outdoor temperatures. The system's Coefficient of Performance (Seasonal COP, or SCOP) over two entire winters was calculated, based on measured data, to be 3.29over the first winter and 2.68 over the second winter. A second seasonal efficiency calculation by a different method yielded a SCOP of 2.78 for the first winter and 2.83 for the second winter. This second seasonal efficiency calculation was determined by comparing measured heat pump energy use to the in situ energy use with resistance heat alone. This method is the ratio of the slopes of thedaily energy use load lines.

  4. E-Area Performance Assessment Interim Measures Assessment FY2005

    Energy Technology Data Exchange (ETDEWEB)

    Stallings, M

    2006-01-31

    After major changes to the limits for various disposal units of the E-Area Low Level Waste Facility (ELLWF) last year, no major changes have been made during FY2005. A Special Analysis was completed which removes the air pathway {sup 14}C limit from the Intermediate Level Vault (ILV). This analysis will allow the disposal of reactor moderator deionizers which previously had no pathway to disposal. Several studies have also been completed providing groundwater transport input for future special analyses. During the past year, since Slit Trenches No.1 and No.2 were nearing volumetric capacity, they were operationally closed under a preliminary closure analysis. This analysis was performed using as-disposed conditions and data and showed that concrete rubble from the demolition of 232-F was acceptable for disposal in the STs even though the latest special analysis for the STs had reduced the tritium limits so that the inventory in the rubble exceeded limits. A number of special studies are planned during the next years; perhaps the largest of these will be revision of the Performance Assessment (PA) for the ELLWF. The revision will be accomplished by incorporating special analyses performed since the last PA revision as well as revising analyses to include new data. Projected impacts on disposal limits of more recent studies have been estimated. No interim measures will be applied during this year. However, it is being recommended that tritium disposals to the Components-in-Grout (CIG) Trenches be suspended until a limited Special Analysis (SA) currently in progress is completed. This SA will give recommendations for optimum placement of tritiated D-Area tower waste. Further recommendations for tritiated waste placement in the CIG Trenches will be given in the upcoming PA revision.

  5. VET again

    DEFF Research Database (Denmark)

    Duch, Henriette; Andreasen, Karen Egedal

    2017-01-01

    In 2010, a mandatory teacher training course was introduced for new vocational college teachers in Denmark. Since then, all vocational teachers have to complete the same course, regardless of practical work experience and educational background. After completion, they apply the knowledge to a very...

  6. En Route towards European Clinical Breakpoints for Veterinary Antimicrobial Susceptibility Testing: A Position Paper Explaining the VetCAST Approach

    Science.gov (United States)

    Toutain, Pierre-Louis; Bousquet-Mélou, Alain; Damborg, Peter; Ferran, Aude A.; Mevius, Dik; Pelligand, Ludovic; Veldman, Kees T.; Lees, Peter

    2017-01-01

    VetCAST is the EUCAST sub-committee for Veterinary Antimicrobial Susceptibility Testing. Its remit is to define clinical breakpoints (CBPs) for antimicrobial drugs (AMDs) used in veterinary medicine in Europe. This position paper outlines the procedures and reviews scientific options to solve challenges for the determination of specific CBPs for animal species, drug substances and disease conditions. VetCAST will adopt EUCAST approaches: the initial step will be data assessment; then procedures for decisions on the CBP; and finally the release of recommendations for CBP implementation. The principal challenges anticipated by VetCAST are those associated with the differing modalities of AMD administration, including mass medication, specific long-acting product formulations or local administration. Specific challenges comprise mastitis treatment in dairy cattle, the range of species and within species breed considerations and several other variable factors not relevant to human medicine. Each CBP will be based on consideration of: (i) an epidemiological cut-off value (ECOFF) – the highest MIC that defines the upper end of the wild-type MIC distribution; (ii) a PK/PD breakpoint obtained from pre-clinical pharmacokinetic data [this PK/PD break-point is the highest possible MIC for which a given percentage of animals in the target population achieves a critical value for the selected PK/PD index (fAUC/MIC or fT > MIC)] and (iii) when possible, a clinical cut-off, that is the relationship between MIC and clinical cure. For the latter, VetCAST acknowledges the paucity of such data in veterinary medicine. When a CBP cannot be established, VetCAST will recommend use of ECOFF as surrogate. For decision steps, VetCAST will follow EUCAST procedures involving transparency, consensus and independence. VetCAST will ensure freely available dissemination of information, concerning standards, guidelines, ECOFF, PK/PD breakpoints, CBPs and other relevant information for AST

  7. En Route towards European Clinical Breakpoints for Veterinary Antimicrobial Susceptibility Testing: A Position Paper Explaining the VetCAST Approach.

    Science.gov (United States)

    Toutain, Pierre-Louis; Bousquet-Mélou, Alain; Damborg, Peter; Ferran, Aude A; Mevius, Dik; Pelligand, Ludovic; Veldman, Kees T; Lees, Peter

    2017-01-01

    VetCAST is the EUCAST sub-committee for Veterinary Antimicrobial Susceptibility Testing. Its remit is to define clinical breakpoints (CBPs) for antimicrobial drugs (AMDs) used in veterinary medicine in Europe. This position paper outlines the procedures and reviews scientific options to solve challenges for the determination of specific CBPs for animal species, drug substances and disease conditions. VetCAST will adopt EUCAST approaches: the initial step will be data assessment; then procedures for decisions on the CBP; and finally the release of recommendations for CBP implementation. The principal challenges anticipated by VetCAST are those associated with the differing modalities of AMD administration, including mass medication, specific long-acting product formulations or local administration. Specific challenges comprise mastitis treatment in dairy cattle, the range of species and within species breed considerations and several other variable factors not relevant to human medicine. Each CBP will be based on consideration of: (i) an epidemiological cut-off value (ECOFF) - the highest MIC that defines the upper end of the wild-type MIC distribution; (ii) a PK/PD breakpoint obtained from pre-clinical pharmacokinetic data [this PK/PD break-point is the highest possible MIC for which a given percentage of animals in the target population achieves a critical value for the selected PK/PD index ( f AUC/MIC or f T > MIC)] and (iii) when possible, a clinical cut-off, that is the relationship between MIC and clinical cure. For the latter, VetCAST acknowledges the paucity of such data in veterinary medicine. When a CBP cannot be established, VetCAST will recommend use of ECOFF as surrogate. For decision steps, VetCAST will follow EUCAST procedures involving transparency, consensus and independence. VetCAST will ensure freely available dissemination of information, concerning standards, guidelines, ECOFF, PK/PD breakpoints, CBPs and other relevant information for AST

  8. En Route towards European Clinical Breakpoints for Veterinary Antimicrobial Susceptibility Testing: A Position Paper Explaining the VetCAST Approach

    Directory of Open Access Journals (Sweden)

    Pierre-Louis Toutain

    2017-12-01

    Full Text Available VetCAST is the EUCAST sub-committee for Veterinary Antimicrobial Susceptibility Testing. Its remit is to define clinical breakpoints (CBPs for antimicrobial drugs (AMDs used in veterinary medicine in Europe. This position paper outlines the procedures and reviews scientific options to solve challenges for the determination of specific CBPs for animal species, drug substances and disease conditions. VetCAST will adopt EUCAST approaches: the initial step will be data assessment; then procedures for decisions on the CBP; and finally the release of recommendations for CBP implementation. The principal challenges anticipated by VetCAST are those associated with the differing modalities of AMD administration, including mass medication, specific long-acting product formulations or local administration. Specific challenges comprise mastitis treatment in dairy cattle, the range of species and within species breed considerations and several other variable factors not relevant to human medicine. Each CBP will be based on consideration of: (i an epidemiological cut-off value (ECOFF – the highest MIC that defines the upper end of the wild-type MIC distribution; (ii a PK/PD breakpoint obtained from pre-clinical pharmacokinetic data [this PK/PD break-point is the highest possible MIC for which a given percentage of animals in the target population achieves a critical value for the selected PK/PD index (fAUC/MIC or fT > MIC] and (iii when possible, a clinical cut-off, that is the relationship between MIC and clinical cure. For the latter, VetCAST acknowledges the paucity of such data in veterinary medicine. When a CBP cannot be established, VetCAST will recommend use of ECOFF as surrogate. For decision steps, VetCAST will follow EUCAST procedures involving transparency, consensus and independence. VetCAST will ensure freely available dissemination of information, concerning standards, guidelines, ECOFF, PK/PD breakpoints, CBPs and other relevant information

  9. 38 CFR 74.2 - What are the eligibility requirements a concern must meet for VetBiz VIP Verification Program?

    Science.gov (United States)

    2010-07-01

    ... loans or other Federally assisted financing, is eligible for VetBiz VIP Verification. (e) U.S. Small Business Administration (SBA) Protest Decisions. Any firm registered in the VetBiz VIP database that is found to be ineligible due to an SBA protest decision or other negative finding will be immediately...

  10. Evaluation of emergency department performance - a systematic review on recommended performance and quality-in-care measures.

    Science.gov (United States)

    Sørup, Christian Michel; Jacobsen, Peter; Forberg, Jakob Lundager

    2013-08-09

    Evaluation of emergency department (ED) performance remains a difficult task due to the lack of consensus on performance measures that reflects high quality, efficiency, and sustainability. To describe, map, and critically evaluate which performance measures that the published literature regard as being most relevant in assessing overall ED performance. Following the PRISMA guidelines, a systematic literature review of review articles reporting accentuated ED performance measures was conducted in the databases of PubMed, Cochrane Library, and Web of Science. Study eligibility criteria includes: 1) the main purpose was to discuss, analyse, or promote performance measures best reflecting ED performance, 2) the article was a review article, and 3) the article reported macro-level performance measures, thus reflecting an overall departmental performance level. A number of articles addresses this study's objective (n = 14 of 46 unique hits). Time intervals and patient-related measures were dominant in the identified performance measures in review articles from US, UK, Sweden and Canada. Length of stay (LOS), time between patient arrival to initial clinical assessment, and time between patient arrivals to admission were highlighted by the majority of articles. Concurrently, "patients left without being seen" (LWBS), unplanned re-attendance within a maximum of 72 hours, mortality/morbidity, and number of unintended incidents were the most highlighted performance measures that related directly to the patient. Performance measures related to employees were only stated in two of the 14 included articles. A total of 55 ED performance measures were identified. ED time intervals were the most recommended performance measures followed by patient centeredness and safety performance measures. ED employee related performance measures were rarely mentioned in the investigated literature. The study's results allow for advancement towards improved performance measurement and

  11. Diagnostic performance of MRI measurements to assess hindfoot malalignment. An assessment of four measurement techniques

    International Nuclear Information System (INIS)

    Buck, Florian M.; Hoffmann, Adrienne; Mamisch-Saupe, Nadja; Hodler, Juerg; Farshad, Mazda; Espinosa, Norman; Resnick, Donald

    2013-01-01

    To investigate the ability of coronal non-weight-bearing MR images to discriminate between normal and abnormal hindfoot alignment. Three different measurement techniques (calcaneal axis, medial/lateral calcaneal contour) based on weight-bearing hindfoot alignment radiographs were applied in 49 patients (mean, 48 years; range 21-76 years). Three groups of subjects were enrolled: (1) normal hindfoot alignment (0 -10 valgus); (2) abnormal valgus (>10 ); (3) any degree of varus hindfoot alignment. Hindfoot alignment was then measured on coronal MR images using four different measurement techniques (calcaneal axis, medial/lateral calcaneal contour, sustentaculum tangent). ROC analysis was performed to find the MR measurement with the greatest sensitivity and specificity for discrimination between normal and abnormal hindfoot alignment. The most accurate measurement on MR images to detect abnormal hindfoot valgus was the one using the medial calcaneal contour, reaching a sensitivity/specificity of 86 %/75 % using a cutoff value of >11 valgus. The most accurate measurement on MR images to detect abnormal hindfoot varus was the sustentaculum tangent, reaching a sensitivity/specificity of 91 %/71 % using a cutoff value of <12 valgus. It is possible to suspect abnormal hindfoot alignment on coronal non-weight-bearing MR images. (orig.)

  12. Diagnostic performance of MRI measurements to assess hindfoot malalignment. An assessment of four measurement techniques

    Energy Technology Data Exchange (ETDEWEB)

    Buck, Florian M.; Hoffmann, Adrienne; Mamisch-Saupe, Nadja; Hodler, Juerg [University Hospital Balgrist and University of Zurich, Radiology, Zuerich (Switzerland); Farshad, Mazda; Espinosa, Norman [University Hospital Balgrist and University of Zurich, Department of Orthopaedic Surgery, Zuerich (Switzerland); Resnick, Donald [University of California San Diego, Department of Radiology, San Diego, CA (United States)

    2013-09-15

    To investigate the ability of coronal non-weight-bearing MR images to discriminate between normal and abnormal hindfoot alignment. Three different measurement techniques (calcaneal axis, medial/lateral calcaneal contour) based on weight-bearing hindfoot alignment radiographs were applied in 49 patients (mean, 48 years; range 21-76 years). Three groups of subjects were enrolled: (1) normal hindfoot alignment (0 -10 valgus); (2) abnormal valgus (>10 ); (3) any degree of varus hindfoot alignment. Hindfoot alignment was then measured on coronal MR images using four different measurement techniques (calcaneal axis, medial/lateral calcaneal contour, sustentaculum tangent). ROC analysis was performed to find the MR measurement with the greatest sensitivity and specificity for discrimination between normal and abnormal hindfoot alignment. The most accurate measurement on MR images to detect abnormal hindfoot valgus was the one using the medial calcaneal contour, reaching a sensitivity/specificity of 86 %/75 % using a cutoff value of >11 valgus. The most accurate measurement on MR images to detect abnormal hindfoot varus was the sustentaculum tangent, reaching a sensitivity/specificity of 91 %/71 % using a cutoff value of <12 valgus. It is possible to suspect abnormal hindfoot alignment on coronal non-weight-bearing MR images. (orig.)

  13. Front-End Electronics for Verification Measurements: Performance Evaluation and Viability of Advanced Tamper Indicating Measures

    International Nuclear Information System (INIS)

    Smith, E.; Conrad, R.; Morris, S.; Ramuhalli, P.; Sheen, D.; Schanfein, M.; Ianakiev, K.; Browne, M.; Svoboda, J.

    2015-01-01

    The International Atomic Energy Agency (IAEA) continues to expand its use of unattended, remotely monitored measurement systems. An increasing number of systems and an expanding family of instruments create challenges in terms of deployment efficiency and the implementation of data authentication measures. A collaboration between Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), and Los Alamos National Laboratory (LANL) is working to advance the IAEA's capabilities in these areas. The first objective of the project is to perform a comprehensive evaluation of a prototype front-end electronics package, as specified by the IAEA and procured from a commercial vendor. This evaluation begins with an assessment against the IAEA's original technical specifications and expands to consider the strengths and limitations over a broad range of important parameters that include: sensor types, cable types, and the spectrum of industrial electromagnetic noise that can degrade signals from remotely located detectors. A second objective of the collaboration is to explore advanced tamper-indicating (TI) measures that could help to address some of the long-standing data authentication challenges with IAEA's unattended systems. The collaboration has defined high-priority tampering scenarios to consider (e.g., replacement of sensor, intrusion into cable), and drafted preliminary requirements for advanced TI measures. The collaborators are performing independent TI investigations of different candidate approaches: active time-domain reflectometry (PNNL), passive noise analysis (INL), and pulse-by-pulse analysis and correction (LANL). The initial investigations focus on scenarios where new TI measures are retrofitted into existing IAEA UMS deployments; subsequent work will consider the integration of advanced TI methods into new IAEA UMS deployments where the detector is separated from the front-end electronics. In this paper, project progress

  14. Freight corridor performance measurement system: A framework for South Africa

    Directory of Open Access Journals (Sweden)

    Jan H. Havenga

    2016-11-01

    Full Text Available Background: On a national level, South Africa’s freight logistics industry is inefficient. The country ranks 36th out of 40 countries in terms of transport productivity (tonne kilometres as a ratio of gross domestic product, or GDP; the ratio of freight logistics costs to GDP measured 11.1% in 2013, compared to that of developed regions which measures in the order of 9%; and rail tonne-km market share on the two most dense long-distance corridors, namely, GautengDurban and Gauteng-Cape Town, is only 12.8% and 4.4%, respectively, whereas rail is globally acknowledged as a more efficient provider of long-distance freight solutions, given appropriate investments and service commitments. Objectives: A cornerstone of improved national freight logistics performance is the availability of reliable indicators to quantify the efficiency and capacity of the logistics network over the intermediate and long term, thereby enabling an evidence-based policy and investment environment. The objective of this article is to describe the foundation framework (i.e. phase 1 for South Africa’s freight corridor performance measurement system (CPMS. Once populated, the CPMS will be a key generator of indicators to facilitate the systemic management of corridors as a national production factor and thereby contributing to South Africa’s competitiveness. Method: The design of South Africa’s CPMS was informed by desktop research and refined through an extensive stakeholder consultation process. A distinction was made between South Africa’s dedicated bulk corridors and the multi-modal corridors. Results: Facilitating both stakeholder involvement and agreement on key indicators, as well as the eventual development of a system supporting the population, aggregation and dissemination of the CPMS are critical outcomes for the management of corridors as a national production factor. Three overarching corridor indicators were defined, relating to increased throughput

  15. Tumescent liposuction report performance measurement initiative: national survey results.

    Science.gov (United States)

    Hanke, William; Cox, Sue Ellen; Kuznets, Naomi; Coleman, William P

    2004-07-01

    This study was created by the Accreditation Association for Ambulatory Health Care Institute for Quality Improvement to measure clinical performance and improvement opportunities for physicians and ambulatory health-care organizations. Data were collected prospectively between February 2001 and August 2002. Thirty-nine study centers participated, and 688 patients who had tumescent liposuction were surveyed and followed for 6 months. The objective was to determine patient satisfaction with tumescent liposuction and examine current liposuction practice and the safety of tumescent liposuction in a representative cohort of patients. The Accreditation Association for Ambulatory Health Care Institute for Quality Improvement collected prospective data from February 2001 to August 2002 from 68 organizations registered for this study. Ultimately 39 organizations submitted 688 useable cases performed totally with local anesthesia, "tumescent technique." The overall clinical complication rate found in the Accreditation Association for Ambulatory Health Care Institute for Quality Improvement study was 0.7% (5 of 702). There was a minor complication rate of 0.57%. The major complication rate was 0.14% with one patient requiring hospitalization. Seventy-five percent of the patients reported no discomfort during their procedures. Of the 59% of patients who responded to a 6-month postoperative survey, 91% were positive about their decision to have liposuction (rating of 4 or 5 on a scale of 1-5) and 84% had high levels (4 or 5 on a scale of 1-5) of overall satisfaction with the procedure. Our findings are consistent with others in that tumescent liposuction is a safe procedure with a low complication rate and high patient satisfaction.

  16. 45 CFR 270.7 - What data will we use to measure performance on the work support and other measures?

    Science.gov (United States)

    2010-10-01

    ... measure performance on the work support and other measures? (a) We will use Census Bureau data to rank... 45 Public Welfare 2 2010-10-01 2010-10-01 false What data will we use to measure performance on the work support and other measures? 270.7 Section 270.7 Public Welfare Regulations Relating to Public...

  17. Upper Bounds on Performance Measures of Heterogeneous // Queues

    Directory of Open Access Journals (Sweden)

    F. S. Q. Alves

    2011-01-01

    Full Text Available In many real-life queueing systems, the servers are often heterogeneous, namely they work at different rates. This paper provides a simple method to compute tight upper bounds on two important performance measures of single-class heterogeneous multi-server Markovian queueing systems, namely the average number in queue and the average waiting time in queue. This method is based on an expansion of the state space that is followed by an approximate reduction of the state space, only considering the most probable states. In most cases tested, we were able to approximate the actual behavior of the system with smaller errors than those obtained from traditional homogeneous multiserver Markovian queues, as shown by GPSS simulations. In addition, we have correlated the quality of the approximation with the degree of heterogeneity of the system, which was evaluated using its Gini index. Finally, we have shown that the bounds are robust and still useful, even considering quite different allocation strategies. A large number of simulation results show the accuracy of the proposed method that is better than that of classical homogeneous multiserver Markovian formulae in many situations.

  18. Measured and projected performance of plasma direct converters

    International Nuclear Information System (INIS)

    Barr, W.L.; Moir, R.W.

    1981-01-01

    Test results from two plasma direct converters and their predicted cost and performance on tandem mirror fusion reactors are present. The tests were done at high power density (approx. 70 W/cm 2 ) in steady state to simulate the predicted conditions in a reactor. A single stage unit and a two-stage unit of the Venetian blind type were tested at up to 100 kV and 6 kW for a total time of about 80 hours. Measured efficiencies, when projected to a reactor, are typically about 50% for a single stage unit and 60 to 70% for a two-stage unit, depending on the energy distribution of the ions, the degree of subdivision of the collectors, and on the gas pressure. The high ambipolar potential in tandem mirror devices makes this good efficiency possible. When radiatively cooled grids are used, the incident power density is limited to about 100 W/cm 2 by the thermionic emission of electrons

  19. Measuring economic performance, social progress and sustainability using an index

    International Nuclear Information System (INIS)

    de Carvalho, Joaquim Francisco

    2011-01-01

    The energy crisis and a greater awareness among the general public regarding the issue of climate change have, between them, led to a notable increase in the interest shown by governments in relation to the problem of environmental sustainability. An example has been the initiative taken by the President of France to set up a commission, known as the Sarkozy Commission, named after the President, bringing together renowned economists to study and propose forms of economic performance measurement related to social progress. This article aims to propose a methodology to establish a quantitative definition of sustainability structured on the principles of minimum and maximum entropy production, and, based on this, outline a way of organizing the many sources of, and kinds of energy, we have available to us in order of the intensity of their respective environmental impacts. Based on this, we could produce an Environmental Sustainability Index, linked to existing statistical indicators of human development, and thereby arrive at a Sustainable Human Development Index, which would be positively or negatively influenced by parameters linked to environmental sustainability and quality of life. In order to ensure that this index can produce practical results, the WTO (World Trade Organization) would have to establish a scale of increments, to be applied to export tariffs on products originating in countries with different indexes. (author)

  20. Measurement system performance during cold checkout runs at the BNFP

    International Nuclear Information System (INIS)

    Ehinger, M.H.; Crawford, J.M.

    1978-01-01

    The measurement systems in a complex nuclear fuel plant such as the Barnwell Nuclear Fuel Plant rely on capabilities to remotely measure solution quantities and determine the nuclear material content of these solutions. During recent testing activities using natural uranium, a major objective of the NMC group was to demonstrate these solution measurement capabilities. Installed measurement systems at the BNFP use the most recent innovations in measurement equipment and techniques for remote solution measurement. This paper presents the measurement methods and results of the tests and evaluations. 6 figures

  1. A National Initiative to Advance School Mental Health Performance Measurement in the US

    Science.gov (United States)

    Connors, Elizabeth Halsted; Stephan, Sharon Hoover; Lever, Nancy; Ereshefsky, Sabrina; Mosby, Amanda; Bohnenkamp, Jill

    2016-01-01

    Standardized health performance measurement has increasingly become an imperative for assuring quality standards in national health care systems. As compared to somatic health performance measures, behavioral health performance measures are less developed. There currently is no national standardized performance measurement system for monitoring…

  2. The validity of subjective performance measures: school principals in Texas and Denmark

    NARCIS (Netherlands)

    Meier, Kenneth J.; Winter, Soren C.; O'Toole, Laurence J.; Favero, Nathan; Andersen, Simon Calmar

    2015-01-01

    Public management studies are increasingly using survey data on managers' perceptions of performance to measure organizational performance. These perceptual measures are tempting to apply because archival performance data or surveys of target group outcomes and satisfaction are often lacking, costly

  3. Access management performance measures for Virginia : a practical approach for public accountability.

    Science.gov (United States)

    2010-04-01

    In order to develop performance measures to communicate the effect of Virginias access management program, five : tasks were performed: (1) the appropriate literature was reviewed, (2) a catalog of potential performance measures was : developed, (...

  4. Perturbing engine performance measurements to determine optimal engine control settings

    Science.gov (United States)

    Jiang, Li; Lee, Donghoon; Yilmaz, Hakan; Stefanopoulou, Anna

    2014-12-30

    Methods and systems for optimizing a performance of a vehicle engine are provided. The method includes determining an initial value for a first engine control parameter based on one or more detected operating conditions of the vehicle engine, determining a value of an engine performance variable, and artificially perturbing the determined value of the engine performance variable. The initial value for the first engine control parameter is then adjusted based on the perturbed engine performance variable causing the engine performance variable to approach a target engine performance variable. Operation of the vehicle engine is controlled based on the adjusted initial value for the first engine control parameter. These acts are repeated until the engine performance variable approaches the target engine performance variable.

  5. INDICATORS USED FOR THE PERFORMANCE MEASUREMENT OF SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Vladoi Anca Daniela

    2009-05-01

    Full Text Available The development of the environment of a company has a direct influence on its performance and its success. For this reason a company should not only analyze its internal performance, but also the external performance of the business environment and the su

  6. Model for measuring complex performance in an aviation environment

    International Nuclear Information System (INIS)

    Hahn, H.A.

    1988-01-01

    An experiment was conducted to identify models of pilot performance through the attainment and analysis of concurrent verbal protocols. Sixteen models were identified. Novice and expert pilots differed with respect to the models they used. Models were correlated to performance, particularly in the case of expert subjects. Models were not correlated to performance shaping factors (i.e. workload). 3 refs., 1 tab

  7. Measuring US Army medical evacuation: Metrics for performance improvement.

    Science.gov (United States)

    Galvagno, Samuel M; Mabry, Robert L; Maddry, Joseph; Kharod, Chetan U; Walrath, Benjamin D; Powell, Elizabeth; Shackelford, Stacy

    2018-01-01

    The US Army medical evacuation (MEDEVAC) community has maintained a reputation for high levels of success in transporting casualties from the point of injury to definitive care. This work served as a demonstration project to advance a model of quality assurance surveillance and medical direction for prehospital MEDEVAC providers within the Joint Trauma System. A retrospective interrupted time series analysis using prospectively collected data was performed as a process improvement project. Records were reviewed during two distinct periods: 2009 and 2014 to 2015. MEDEVAC records were matched to outcomes data available in the Department of Defense Trauma Registry. Abstracted deidentified data were reviewed for specific outcomes, procedures, and processes of care. Descriptive statistics were applied as appropriate. A total of 1,008 patients were included in this study. Nine quality assurance metrics were assessed. These metrics were: airway management, management of hypoxemia, compliance with a blood transfusion protocol, interventions for hypotensive patients, quality of battlefield analgesia, temperature measurement and interventions, proportion of traumatic brain injury (TBI) patients with hypoxemia and/or hypotension, proportion of traumatic brain injury patients with an appropriate assessment, and proportion of missing data. Overall survival in the subset of patients with outcomes data available in the Department of Defense Trauma Registry was 97.5%. The data analyzed for this study suggest overall high compliance with established tactical combat casualty care guidelines. In the present study, nearly 7% of patients had at least one documented oxygen saturation of less than 90%, and 13% of these patients had no documentation of any intervention for hypoxemia, indicating a need for training focus on airway management for hypoxemia. Advances in battlefield analgesia continued to evolve over the period when data for this study was collected. Given the inherent high

  8. Cooperative VET in Training Networks: Analysing the Free-Rider Problem in a Sociology-of-Conventions Perspective

    Science.gov (United States)

    Leemann, Regula Julia; Imdorf, Christian

    2015-01-01

    In training networks, particularly small and medium-sized enterprises pool their resources to train apprentices within the framework of the dual VET system, while an intermediary organisation is tasked with managing operations. Over the course of their apprenticeship, the apprentices switch from one training company to another on a (half-) yearly…

  9. Performance Evaluation of Proportional Fair Scheduling Algorithm with Measured Channels

    DEFF Research Database (Denmark)

    Sørensen, Troels Bundgaard; Pons, Manuel Rubio

    2005-01-01

    subjected to measured channel traces. Specifically, we applied measured signal fading recorded from GSM cell phone users making calls on an indoor wireless office system. Different from reference channel models, these measured channels have much more irregular fading between users, which as we show...

  10. Performing Neutron Cross-Section Measurements at RIA

    International Nuclear Information System (INIS)

    Ahle, L.E.

    2003-01-01

    The Rare Isotope Accelerator (RIA) is a proposed accelerator for the low energy nuclear physics community. Its goal is to understand the natural abundances of the elements heavier than iron, explore the nuclear force in systems far from stability, and study symmetry violation and fundamental physics in nuclei. To achieve these scientific goals, RIA promises to produce isotopes far from stability in sufficient quantities to allow experiments. It would also produce near stability isotopes at never before seen production rates, as much as 10 12 pps. Included in these isotopes are many that are important to stockpile stewardship, such as 87 Y, 146-50 Eu, and 231 Th. Given the expected production rates at RIA and a reasonably intense neutron source, one can expect to make ∼10 μg targets of nuclei with a half-life of ∼1 day. Thus, it will be possible at RIA to obtain experimental information on the neutron cross section for isotopes that have to date only been determined by theory. There are two methods to perform neutron cross-section measurements, prompt and delayed. The prompt method tries to measure each reaction as it happens. The exact technique employed will depend on the reaction of interest, (n,2n), (n,γ), (n,p), etc. The biggest challenge with this method is designing a detector system that can handle the gamma ray background from the target. The delayed method, which is the traditional radiochemistry method for determining the cross-section, irradiates the targets and then counts the reaction products after the fact. While this allows one to avoid the target background, the allowed fraction of target impurities is extremely low. This is especially true for the desired reaction product with the required impurity fraction on the order of 10 -9 . This is particularly problematic for (n,2n) and (n,γ) reactions, whose reaction production cannot be chemically separated from the target. In either case, the first step at RIA to doing these measurements is

  11. Performance measurement of workplace change: in two different cultural contexts

    OpenAIRE

    Chaiwat Riratanaphong

    2014-01-01

    Nowadays, organisations must cope with the pressure of cost reduction and efficiency in order to succeed in a highly competitive business environment. However, drivers to improve social interaction and employee’s performance and as such to contribute to organisational goals and objectives make it necessary to be concerned with other performance criteria as well, such as effectiveness, flexibility, employee satisfaction, productivity and creativity. There is a growing need for performance mana...

  12. Human Rights and the Environmental Protection: The Naïveté in Environmental Culture

    Directory of Open Access Journals (Sweden)

    Made Adhitya Anggriawan Wisadha

    2018-05-01

    Full Text Available There are growing trends in the human rights to substantially extend the values to protect the environment or moreover to welcome the ideas of the rights to environment, not to mention the rights of environment. The purpose is to inclusively embrace the environmental problems wherein the humanity challenges posited on, but this agenda may leave a room of doubt how far the human rights body can address the environmental destruction as it needs the interplay of culture and environmental ethics to promoting such concepts. Therefore, this paper aims to identify the justification of how human rights in the environmental protection in the contemporary discourse are bringing to light, as many current cases attempt to linkage the environmental approach to the human rights instrument, such as the rights to life, healthy environment, and intergenerational equity. To analyse further, the theoretical framework in this paper will be explicated by environmental culture paradigm which illustrates the egalitarian concept between human and environment to elicit the clear thoughts of how human rights is naïve to protect the environment. This article will firstly depict the human rights and the environmental protection discourse and then, explore the naïveté narratives of environmental culture about the ecological crisis roots that are fundamentally anthropogenic, as to reflect the ground realities how this nexus will play out. Finally, this paper found the moral justification per se relies on the effort of elaborating the human prudence in their relationship with nature, albeit bringing the naïveté.

  13. Relationship between performance measurements and sale price of ...

    African Journals Online (AJOL)

    Unknown

    The main advantage is that the buyer is purchasing a ram that has been selected for traits of economic importance and is adapted to the specific environment in which it is expected to perform. The aim of this study was to determine the extent to which the performance of animals in a veld-ram club influences the price buyers ...

  14. Analysis of Aptitude, Training, and Job Performance Measures

    Science.gov (United States)

    1982-02-01

    provisions have been made for students with unsatisfactory performance to be " recycled ", that is, to retake a module or part of a course (e.g., 2841, Marine...clear, simple language o questions avoided trivia , and were related to task performance o response choices were parallel and realistic. The assessment

  15. Is There a Correlation Between Infection Control Performance and Other Hospital Quality Measures?

    Science.gov (United States)

    O'Hara, Lyndsay M; Morgan, Daniel J; Pineles, Lisa; Li, Shanshan; Sulis, Carol; Bowling, Jason; Drees, Marci; Jacob, Jesse T; Anderson, Deverick J; Warren, David K; Harris, Anthony D

    2017-06-01

    Quality measures are increasingly reported by hospitals to the Centers for Medicare and Medicaid Services (CMS), yet there may be tradeoffs in performance between infection control (IC) and other quality measures. Hospitals that performed best on IC measures did not perform well on most CMS non-IC quality measures. Infect Control Hosp Epidemiol 2017;38:736-739.

  16. 26 CFR 801.3 - Measuring employee performance.

    Science.gov (United States)

    2010-04-01

    ..., will be composed of elements that support the organizational measures of Customer Satisfaction, Employee Satisfaction, and Business Results; however, such organizational measures will not directly...), employee has the meaning as defined in 5 U.S.C. 2105(a). (ii) For purposes of the limitation contained in...

  17. Health Care Quality: Measuring Obesity in Performance Frameworks.

    Science.gov (United States)

    Zvenyach, Tracy; Pickering, Matthew K

    2017-08-01

    Obesity affects over one-third of Americans and leads to several chronic and costly comorbid conditions. The national movement toward value-based care calls for a refocusing of efforts to address the US obesity epidemic. To help set the stage, the current landscape of obesity-specific quality measures was evaluated. Seven quality measure databases and nine professional societies were searched. Inclusion and exclusion criteria were applied. Measures were then classified by domain and by implementation in national public programs. Eleven obesity-specific quality measures in adults were identified (nine process and two outcome). Three measures received National Quality Forum (NQF) endorsement. Two measures were actively used within Centers for Medicare and Medicaid Services (CMS) programs. Only one measure was both NQF-endorsed and used by CMS. Limitations exist with respect to obesity-specific quality metrics. Such gaps provide opportunities for obesity care specialists to engage and offer valuable insights and pragmatic approaches toward quality measurement. © 2017 The Obesity Society.

  18. Developing a GPS-based truck freight performance measure platform.

    Science.gov (United States)

    2010-05-01

    Although trucks move the largest volume and value of goods in urban areas, relatively little is known about their travel : patterns and how the roadway network performs for trucks. Global positioning systems (GPS) used by trucking : companies to mana...

  19. 76 FR 74050 - Measured Building Energy Performance Data Taxonomy

    Science.gov (United States)

    2011-11-30

    ... developed using a ``top-down'' approach, based on a logical understanding of building performance... were developed using a ``bottom-up'' approach, by compiling and editing lists of fields from existing...

  20. Measuring and Predicting Sleep and Performance During Military Operations

    Science.gov (United States)

    2012-08-23

    strengths of this modeling approach is that accurate predictions of fatigue, performance, or alert- ness can be made from observed sleep timing...and, in which fatigue, performance, or alertness predictions are required prior to the task. Limitations of Current Models The strengths and...mean ± SD, 35.9 ± 1.2 hours), crews flew to Auckland , New Zealand, where another short layover was un- dertaken (23.6 ± 0.95 hours). A final flight