Storing files in a parallel computing system based on user-specified parser function

Science.gov (United States)

Faibish, Sorin; Bent, John M; Tzelnic, Percy; Grider, Gary; Manzanares, Adam; Torres, Aaron

2014-10-21

Techniques are provided for storing files in a parallel computing system based on a user-specified parser function. A plurality of files generated by a distributed application in a parallel computing system are stored by obtaining a parser from the distributed application for processing the plurality of files prior to storage; and storing one or more of the plurality of files in one or more storage nodes of the parallel computing system based on the processing by the parser. The plurality of files comprise one or more of a plurality of complete files and a plurality of sub-files. The parser can optionally store only those files that satisfy one or more semantic requirements of the parser. The parser can also extract metadata from one or more of the files and the extracted metadata can be stored with one or more of the plurality of files and used for searching for files.

Prevalence of Antibodies Against Hepatitis e Virus in Veterinarians in Estonia

DEFF Research Database (Denmark)

Lassen, Brian; Janson, Marilin; Neare, Kädi

2017-01-01

positive with both tests. Antibody-positive samples were further examined for the presence of HEV RNA. Three (2.6%) of the 115 veterinarians tested positive for immunoglobulin G antibodies against HEV, whereas no immunoglobulin M antibodies against the virus were detected. The antibody......-positive veterinarians were small animal practitioners. Pigs comprised no or small part of their working time or patients. No HEV RNA was detected in the antibody-positive samples. The prevalence of antibodies against HEV in veterinarians in Estonia was lower than what has been observed in veterinarians in other...

9 CFR 161.3 - Standards for accredited veterinarian duties.

Science.gov (United States)

2010-01-01

... legally able to practice veterinary medicine. An accredited veterinarian shall perform the functions of an... examine such an animal showing abnormalities, in order to determine whether or not there is clinical... accredited work, an accredited veterinarian shall take such measures of sanitation as are necessary to...

Arranging and finding folders and files on your Windows 7 computer

CERN Document Server

Steps, Studio Visual

2014-01-01

If you have lots of documents on your desk, it may prove to be impossible to find the document you are looking for. In order to easily find certain documents, they are often stored in a filing cabinet and arranged in a logical order. The folders on your computer serve the same purpose. They do not just contain files; they can also contain other folders. You can create an unlimited number of folders, and each folder can contain any number of subfolders and files. You can use Windows Explorer, also called the folder window, to work with the files and folders on your computer. You can copy, delete, move, find, and sort files, among other things. Or you can transfer files and folders to a USB stick, an external hard drive, a CD, DVD or Blu-Ray disk. In this practical guide we will show you how to use the folder window, and help you arrange your own files.

Veterinarians' attitudes toward antimicrobial use and selective dry cow treatment in the Netherlands.

Science.gov (United States)

Scherpenzeel, C G M; Santman-Berends, I M G A; Lam, T J G M

2018-03-28

In the Netherlands, regulations have been in place since 2008 to reduce the overall use of antimicrobials to mitigate antimicrobial resistance. As part of these regulations, a ban on the preventive use of antimicrobials, such as applying blanket dry cow treatment, was introduced and alternative measures such as selective dry cow treatment (SDCT) were implemented. Both farmers and veterinarians play an important role in implementing these measures and have a shared responsibility with respect to prudent antimicrobial use (AMU). The attitude of Dutch dairy veterinarians toward restricted AMU and toward SDCT is unknown, but a favorable attitude toward this approach seems crucial for successful implementation. In 2015, an online questionnaire was collected from 181 veterinarians that contained questions with regard to their attitude and behavior toward reduction of AMU and toward SDCT. Descriptive statistics were used to describe the data, and multivariable logistic regression models with a logit link function were applied to evaluate potential associations between veterinarians' attitudes toward AMU and SDCT and the rationale behind their mindset, based on positive and negative aspects of reduction in AMU. The veterinarians were divided into 3 groups based on their opinion on 4 statements with regard to AMU and SDCT: veterinarians with an unfavorable, a neutral, and a favorable attitude toward reduction of AMU and toward SDCT. For the multivariable logistic regression analysis, the first 2 groups were combined and compared with the veterinarians with a favorable attitude. The general attitude of Dutch dairy veterinarians toward reduction of AMU was positive, and most expressed the belief that they can still be a good veterinarian when they prescribe less antimicrobials. Veterinarians indicated they progressively promoted SDCT beginning in 2013. Most veterinarians see the advice they provide to farmers on SDCT as the best possible approach and are convinced that their

A digital imaging teaching file by using the internet, HTML and personal computers

International Nuclear Information System (INIS)

Chun, Tong Jin; Jeon, Eun Ju; Baek, Ho Gil; Kang, Eun Joo; Baik, Seung Kug; Choi, Han Yong; Kim, Bong Ki

1996-01-01

A film-based teaching file takes up space and the need to search through such a file places limits on the extent to which it is likely to be used. Furthermore it is not easy for doctors in a medium-sized hospital to experience a variety of cases, and so for these reasons we created an easy-to-use digital imaging teaching file with HTML(Hypertext Markup Language) and downloaded images via World Wide Web(WWW) services on the Internet. This was suitable for use by computer novices. We used WWW internet services as a resource for various images and three different IMB-PC compatible computers(386DX, 486DX-II, and Pentium) in downloading the images and in developing a digitalized teaching file. These computers were connected with the Internet through a high speed dial-up modem(28.8Kbps) and to navigate the Internet. Twinsock and Netscape were used. 3.0, Korean word processing software, was used to create HTML(Hypertext Markup Language) files and the downloaded images were linked to the HTML files. In this way, a digital imaging teaching file program was created. Access to a Web service via the Internet required a high speed computer(at least 486DX II with 8MB RAM) for comfortabel use; this also ensured that the quality of downloaded images was not degraded during downloading and that these were good enough to use as a teaching file. The time needed to retrieve the text and related images depends on the size of the file, the speed of the network, and the network traffic at the time of connection. For computer novices, a digital image teaching file using HTML is easy to use. Our method of creating a digital imaging teaching file by using Internet and HTML would be easy to create and radiologists with little computer experience who want to study various digital radiologic imaging cases would find it easy to use

The need for public-health veterinarians as seen by future employers.

Science.gov (United States)

Maccabe, Andrew T; Matchett, Karin E; Hueston, William D

2008-01-01

Future employers of veterinarians working in public health see a fast-growing demand. Emerging zoonotic diseases, bio-security threats, and food-safety problems all require the expertise of veterinarians with a focus on complex, global problems that span both human and animal health. The Public Health Task Force of the Association of American Veterinary Medical Colleges convened a group of stakeholders representing various branches of the US federal government, state and local governments, and professional societies to discuss their needs for public-health veterinarians. This article discusses those needs, the broader societal needs that require veterinarians with public-health expertise, and the implications of these for educational programs to train DVMs in public-health issues.

The equine veterinarian : past, present and prospects of a profession

NARCIS (Netherlands)

Loomans, J.B.A.

2008-01-01

The equine veterinarian has regained its position in the veterinary profession. Equine veterinarians work in equine practices as well as in mixed practices. In general, it can be said that the backbone of equine work is formed by a relatively small amount of activities for which only a limited

Facebook use among early-career veterinarians in Ontario, Canada (March to May 2010).

Science.gov (United States)

Weijs, Cynthia A; Coe, Jason B; Christofides, Emily; Muise, Amy; Desmarais, Serge

2013-04-15

To explore the nature and content of information publicly posted to Facebook by early-career veterinarians. Cross-sectional descriptive study. Sample-352 early-career veterinarians. Publicly accessible Facebook profiles were searched online from March to May 2010 for profiles of early-career veterinarians (graduates from 2004 through 2009) registered with the College of Veterinarians of Ontario, Canada. The content of veterinarians' Facebook profiles was evaluated and then categorized as low, medium, or high exposure in terms of the information a veterinarian had publicly posted to Facebook. Through the use of content analysis, high-exposure profiles were further analyzed for publicly posted information that may have posed risks to an individual's or the profession's public image. Facebook profiles for 352 of 494 (71%) registered early-career veterinarians were located. One-quarter (25%) of profiles were categorized as low exposure (ie, high privacy), over half (54%) as medium exposure (i.e., medium privacy), and 21% as high exposure (i.e., low privacy). Content analysis of the high-exposure profiles identified publicly posted information that may pose risks to an individual's or the profession's reputation, including breaches of client confidentiality, evidence of substance abuse, and demeaning comments toward others. Almost a quarter of veterinarians' Facebook profiles viewed in the present study contained publicly available content of a questionable nature that could pose a risk to the reputation of the individual, his or her practice, or the veterinary profession. The increased use of Facebook and all types of social media points to the need for raised awareness by veterinarians of all ages of how to manage one's personal and professional identities online to minimize reputation risks for individuals and their practices and to protect the reputation and integrity of the veterinary profession.

NET: an inter-computer file transfer command

International Nuclear Information System (INIS)

Burris, R.D.

1978-05-01

The NET command was defined and supported in order to facilitate file transfer between computers. Among the goals of the implementation were greatest possible ease of use, maximum power (i.e., support of a diversity of equipment and operations), and protection of the operating system

Expected consequences of convenience euthanasia perceived by veterinarians in Quebec.

Science.gov (United States)

Rathwell-Deault, Dominick; Godard, Béatrice; Frank, Diane; Doizé, Béatrice

2017-07-01

In companion animal practice, convenience euthanasia (euthanasia of a physically and psychologically healthy animal) is recognized as one of the most difficult situations. There is little published on veterinary perceptions of the consequences of convenience euthanasia. A qualitative study on the subject based on interviews with 14 veterinarians was undertaken. The animal's interests in the dilemma of convenience euthanasia was taken into consideration, strictly from the point of view of the physical suffering and stress related to the procedure. The veterinarian's goal was to respect the animal's interests by controlling physical pain. Most often, veterinarians made their own interests and those of the owners a priority when considering the consequences of their decision to perform or refuse convenience euthanasia.

[The role of female veterinarians in Africa].

Science.gov (United States)

Balogh, K K

2000-01-01

While the number of female veterinary students has reached figures as over 80% in the Netherlands and other European countries, the number of female veterinary students in Africa is also changing but still at a slower pace. Still nowadays, according to UNICEF, two-thirds of primary school age children, denied their right to basic education, are girls. In addition, especially in rural areas in Africa, there are only few secondary schools, so that children, either have to travel over large distances on a daily basis or have to live away from their families. As girls, already from an early age play an important role in the daily household routine, they are often not allowed to leave for schooling. There used to be less than 10 veterinary faculties in Africa during the first half of the 20th century. These faculties were located in South Africa, Sudan, Egypt and Nigeria. For many years, African veterinarians were also trained in western countries (UK, France, USA) or in former communist countries (Russia, Ukraine, Romania, Hungary Eastern Germany, Cuba) depending on the existence of historic or political links. A long stay abroad made it more difficult for female students, especially for those with children. Still nowadays, female veterinarians in Africa are mostly working for the veterinary departments mainly in the urban areas. Another area where many female veterinarians can be found are governmental diagnostic and research laboratories as well as training institutions such as veterinary faculties or agricultural colleges. Generally the salaries at these institutions are very low and therefore their male colleagues have gradually shifted to work in the private sector with more competitive salaries (private clinics, sector pharmaceutical companies, development projects, (agricultural) banks, etc). As still in most societies, women tend to follow their husbands, most female veterinarians are bound to find employment where their husbands are based. In addition, as most

Conceptualization of convenience euthanasia as an ethical dilemma for veterinarians in Quebec.

Science.gov (United States)

Rathwell-Deault, Dominick; Godard, Béatrice; Frank, Diane; Doizé, Béatrice

2017-03-01

Companion animal welfare in our society has become increasingly important, yet many healthy animals are euthanized in veterinary facilities. How is it possible to explain the simultaneous presence of these opposing views of obligation toward animals? The goal of this study was to describe convenience euthanasia of companion animals as experienced by veterinarians in order to understand their thought processes. A qualitative study was undertaken to analyze the results of interviews of 14 veterinarians. The study showed that veterinarians interviewed assessed convenience euthanasia based mainly on their subjective evaluation of the owner-animal bond. As most owner-animal bonds stem from an anthropocentric point of view, decisions on convenience euthanasia were taken mostly by considering the veterinarian's and the client/owner's interests.

Methods and apparatus for multi-resolution replication of files in a parallel computing system using semantic information

Science.gov (United States)

Faibish, Sorin; Bent, John M.; Tzelnic, Percy; Grider, Gary; Torres, Aaron

2015-10-20

Techniques are provided for storing files in a parallel computing system using different resolutions. A method is provided for storing at least one file generated by a distributed application in a parallel computing system. The file comprises one or more of a complete file and a sub-file. The method comprises the steps of obtaining semantic information related to the file; generating a plurality of replicas of the file with different resolutions based on the semantic information; and storing the file and the plurality of replicas of the file in one or more storage nodes of the parallel computing system. The different resolutions comprise, for example, a variable number of bits and/or a different sub-set of data elements from the file. A plurality of the sub-files can be merged to reproduce the file.

Educating veterinarians for careers in free-ranging wildlife medicine and ecosystem health

Science.gov (United States)

Mazet, J.A.K.; Hamilton, G.E.; Dierauf, L.A.

2006-01-01

In the last 10 years, the field of zoological medicine has seen an expansive broadening into the arenas of free-ranging wildlife, conservation medicine, and ecosystem health. During the spring/summer of 2005, we prepared and disseminated a survey designed to identify training and educational needs for individuals entering the wildlife medicine and ecosystem health fields. Our data revealed that few wildlife veterinarians believe that the training they received in veterinary school adequately prepared them to acquire and succeed in their field. Wildlife veterinarians and their employers ranked mentorship with an experienced wildlife veterinarian, training in leadership and communication, courses and externships in wildlife health, and additional formal training beyond the veterinary degree as important in preparation for success. Employers, wildlife veterinarians, and job seekers alike reported that understanding and maintaining ecosystem health is a key component of the wildlife veterinarian's job description, as it is critical to protecting animal health, including human health. Today's wildlife veterinarians are a new type of transdisciplinary professional; they practice medicine in their communities and hold titles in every level of government and academia. It is time that we integrate ecosystem health into our curricula to nurture and enhance an expansive way of looking at veterinary medicine and to ensure that veterinary graduates are prepared to excel in this new and complex world, in which the health of wildlife, domestic animals, and people are interdependent.

International survey of veterinarians to assess the importance of competencies in professional practice and education

NARCIS (Netherlands)

Bok, H.G.; Teunissen, P.W.; Boerboom, T.B.; Rhind, S.M.; Baillie, S.; Tegzes, J.; Annandale, H.; Matthew, S.; Torgersen, A.; Hecker, K.G.; Hardi-Landerer, C.M.; Gomez-Lucia, E.; Ahmad, B.; Muijtjens, A.M.; Jaarsma, D.A.; Vleuten, C.P.M. van der; Beukelen, P. van

2014-01-01

OBJECTIVE: To determine the perceived importance of specific competencies in professional veterinary practice and education among veterinarians in several countries. DESIGN: Survey-based prospective study. SAMPLE: 1,137 veterinarians in 10 countries. PROCEDURES: Veterinarians were invited via email

International survey of veterinarians to assess the importance of competencies in professional practice and education

NARCIS (Netherlands)

Bok, Harold G. J.; Teunissen, Pim W.; Boerboom, Tobias B. B.; Rhind, Susan M.; Baillie, Sarah; Tegzes, John; Annandale, Henry; Matthew, Susan; Torgersen, Anne; Hecker, Kent G.; Härdi-Landerer, Christina M.; Gomez-Lucia, Esperanza; Ahmad, Bashir; Muijtjens, Arno M. M.; Jaarsma, Debbie A. D. C.; van der Vleuten, Cees P. M.; van Beukelen, Peter

2014-01-01

To determine the perceived importance of specific competencies in professional veterinary practice and education among veterinarians in several countries. Survey-based prospective study. 1,137 veterinarians in 10 countries. Veterinarians were invited via email to participate in the study. A

Documentation of CATHENA input files for the APOLLO computer

International Nuclear Information System (INIS)

1988-06-01

Input files created for the VAX version of the CATHENA two-fluid code have been modified and documented for simulation on the AECB's APOLLO computer system. The input files describe the RD-14 thermalhydraulic loop, the RD-14 steam generator, the RD-12 steam generator blowdown test facility, the Stern Laboratories Cold Water Injection Facility (CWIT), and a CANDU 600 reactor. Sample CATHENA predictions are given and compared with experimental results where applicable. 24 refs

Evaluation of a Communication Skills Training Program for Companion-Animal Veterinarians: A Pilot Study Using RIAS Coding.

Science.gov (United States)

McArthur, Michelle; Fitzgerald, Jennifer

2016-01-01

Effective veterinarian communication skills training and the related key outcomes provided the impetus for this study. We implemented a pre-experimental pre-test/post-test single-group design with a sample of 13 veterinarians and their 71 clients to evaluate the effects of a 6.5-hour communication skills intervention for veterinarians. Consultations were audiotaped and analyzed with the Roter Interaction Analysis System (RIAS). Clients completed the Consultation and Relational Care Measure, a global satisfaction scale, a Parent Medical Interview Satisfaction Scale, and the Adherence Intent measure. Veterinarians completed a communication confidence measure and a workshop satisfaction scale. Contrary to expectation, neither veterinarian communication skills nor their confidence improved post-training. Despite client satisfaction and perceptions of veterinarians' relational communication skills not increasing, clients nevertheless reported an increased intent to adhere to veterinarian recommendations. This result is important because client adherence is critical to managing and enhancing the health and well-being of animals. The results of the study suggest that while the workshop was highly regarded, either the duration of the training or practice opportunities were insufficient or a booster session was required to increase veterinarian confidence and integration of new skills. Future research should utilize a randomized control study design to investigate the appropriate intervention with which to achieve change in veterinarian communication skills. Such change could translate to more effective interactions in veterinarians' daily lives.

Methods and apparatus for capture and storage of semantic information with sub-files in a parallel computing system

Science.gov (United States)

Faibish, Sorin; Bent, John M; Tzelnic, Percy; Grider, Gary; Torres, Aaron

2015-02-03

Techniques are provided for storing files in a parallel computing system using sub-files with semantically meaningful boundaries. A method is provided for storing at least one file generated by a distributed application in a parallel computing system. The file comprises one or more of a complete file and a plurality of sub-files. The method comprises the steps of obtaining a user specification of semantic information related to the file; providing the semantic information as a data structure description to a data formatting library write function; and storing the semantic information related to the file with one or more of the sub-files in one or more storage nodes of the parallel computing system. The semantic information provides a description of data in the file. The sub-files can be replicated based on semantically meaningful boundaries.

The image database management system of teaching file using personal computer

International Nuclear Information System (INIS)

Shin, M. J.; Kim, G. W.; Chun, T. J.; Ahn, W. H.; Baik, S. K.; Choi, H. Y.; Kim, B. G.

1995-01-01

For the systemic management and easy using of teaching file in radiology department, the authors tried to do the setup of a database management system of teaching file using personal computer. We used a personal computer (IBM PC compatible, 486DX2) including a image capture card(Window vision, Dooin Elect, Seoul, Korea) and video camera recorder (8mm, CCD-TR105, Sony, Tokyo, Japan) for the acquisition and storage of images. We developed the database program by using Foxpro for Window 2.6(Microsoft, Seattle, USA) executed in the Window 3.1 (Microsoft, Seattle, USA). Each datum consisted of hospital number, name, sex, age, examination date, keyword, radiologic examination modalities, final diagnosis, radiologic findings, references and representative images. The images were acquired and stored as bitmap format (8 bitmap, 540 X 390 ∼ 545 X 414, 256 gray scale) and displayed on the 17 inch-flat monitor(1024 X 768, Samtron, Seoul, Korea). Without special devices, the images acquisition and storage could be done on the reading viewbox, simply. The image quality on the computer's monitor was less than the one of original film on the viewbox, but generally the characteristics of each lesions could be differentiated. Easy retrieval of data was possible for the purpose of teaching file system. Without high cost appliances, we could consummate the image database system of teaching file using personal computer with relatively inexpensive method

[Armourer and mad cow disease: images of veterinarians in music].

Science.gov (United States)

Schäffer, J

2001-01-01

This contribution is not about animals in music; it rather attempts to describe how veterinary medicine as a discipline and veterinarians as representatives of the profession are perceived of and portrayed in music. Aside from Gioacchino Rossini's "Barber of Seville", in which Count Almaviva impersonates a veterinarian of the day, the most sympathetic veterinarian character ever created by a lyricist or composer in surely Hans Stadinger, the "armourer" and vet in Albert Lortzings opera. In other musical genres such as artsongs and folksongs, the only such figure worthy of musical interpretation seems to have been those masters of the fiery forge who were also wise in the veterinary healing arts. In the past 20 years vets and veterinary medicine have been included in new musical trends: There are musicals and radio plays in which even the youngest members of the audience are exposed to the veterinarian profession. A number of pop groups are also to be mentioned here. For example, animal welfare has been thematized by punk rockers, and a pop group for Hamburg has put a medieval horse blessing to music. Last but not least, a number of vets in Berlin turn their everyday troubles and worries into musical parodies.

Processing of evaluated neutron data files in ENDF format on personal computers

International Nuclear Information System (INIS)

Vertes, P.

1991-11-01

A computer code package - FDMXPC - has been developed for processing evaluated data files in ENDF format. The earlier version of this package is supplemented with modules performing calculations using Reich-Moore and Adler-Adler resonance parameters. The processing of evaluated neutron data files by personal computers requires special programming considerations outlined in this report. The scope of the FDMXPC program system is demonstrated by means of numerical examples. (author). 5 refs, 4 figs, 4 tabs

Workplace stress, mental health, and burnout of veterinarians in Australia.

Science.gov (United States)

Hatch, P H; Winefield, H R; Christie, B A; Lievaart, J J

2011-11-01

To determine the frequency of the states of depression, anxiety, stress and burnout using internationally validated methods and to relate these to the demographic characteristics of veterinarians in Australia. A postal survey of registered veterinarians with at least one year's experience and whose address was available; 1947 returned the questionnaire providing data for analysis. Overall, veterinarians describe higher levels of depression, anxiety, stress and burnout than the general population. The severity of these states was determined by gender, background, type of practice and years after graduation. Modifying the curricula of veterinary schools to include the teaching of personal cognitive and coping skills to undergraduate veterinary students, the provision of the opportunity to enhance these skills throughout their veterinary career and changes in the veterinary workplace could result in improved mental health, increased job engagement and work satisfaction. © 2011 The Authors. Australian Veterinary Journal © 2011 Australian Veterinary Association.

Survey on Security Issues in File Management in Cloud Computing Environment

Science.gov (United States)

Gupta, Udit

2015-06-01

Cloud computing has pervaded through every aspect of Information technology in past decade. It has become easier to process plethora of data, generated by various devices in real time, with the advent of cloud networks. The privacy of users data is maintained by data centers around the world and hence it has become feasible to operate on that data from lightweight portable devices. But with ease of processing comes the security aspect of the data. One such security aspect is secure file transfer either internally within cloud or externally from one cloud network to another. File management is central to cloud computing and it is paramount to address the security concerns which arise out of it. This survey paper aims to elucidate the various protocols which can be used for secure file transfer and analyze the ramifications of using each protocol.

Informatics in Radiology (infoRAD): personal computer security: part 2. Software Configuration and file protection.

Science.gov (United States)

Caruso, Ronald D

2004-01-01

Proper configuration of software security settings and proper file management are necessary and important elements of safe computer use. Unfortunately, the configuration of software security options is often not user friendly. Safe file management requires the use of several utilities, most of which are already installed on the computer or available as freeware. Among these file operations are setting passwords, defragmentation, deletion, wiping, removal of personal information, and encryption. For example, Digital Imaging and Communications in Medicine medical images need to be anonymized, or "scrubbed," to remove patient identifying information in the header section prior to their use in a public educational or research environment. The choices made with respect to computer security may affect the convenience of the computing process. Ultimately, the degree of inconvenience accepted will depend on the sensitivity of the files and communications to be protected and the tolerance of the user. Copyright RSNA, 2004

How can veterinarians be interesting partners for organic dairy farmers? French farmers' point of views.

Science.gov (United States)

Duval, J E; Bareille, N; Fourichon, C; Madouasse, A; Vaarst, M

2017-10-01

Organic dairy farmers must live up to the organic goal of 'good health' in respect the organic principles and regulation. Veterinarians could be the organic dairy farmers' expected sparring partners in reaching this goal but have found difficulties to establish advisory relationships with them. The objectives of this study are -from organic dairy farmers' points of view- (i) to describe farmers' objectives and strategies regarding herd health, (ii) to describe private veterinarians' roles in farmers' animal health promotion strategies and (iii) to identify farmers' reasons for accepting veterinarians in an advisory role. Fourteen organic dairy farmers were interviewed using qualitative research interviews. Data collection and analysis was performed using a modified approach to Grounded Theory. Organic dairy farmers had animal health management strategies focusing on animal health promotion. Veterinarians had most often solely the role of therapist in farmers' animal health management strategies. Reasons explaining that veterinarians were not able to establish advisory roles were found in the differences between veterinarians and farmers regarding their animal health strategies and solutions to disease problems. Furthermore, veterinarians did not always share farmers' (organic) objectives, values and priorities and this could lead to disagreement on the best choice in animal health management practices. This might be further amplified in situations where there exists a lack of dialogue and mutual interest in other. Copyright © 2017. Published by Elsevier B.V.

A technique for integrating remote minicomputers into a general computer's file system

CERN Document Server

Russell, R D

1976-01-01

This paper describes a simple technique for interfacing remote minicomputers used for real-time data acquisition into the file system of a central computer. Developed as part of the ORION system at CERN, this 'File Manager' subsystem enables a program in the minicomputer to access and manipulate files of any type as if they resided on a storage device attached to the minicomputer. Yet, completely transparent to the program, the files are accessed from disks on the central system via high-speed data links, with response times comparable to local storage devices. (6 refs).

A software to report and file by personal computer

International Nuclear Information System (INIS)

Di Giandomenico, E.; Filippone, A.; Esposito, A.; Bonomo, L.

1989-01-01

During the past four years the authors have been gaining experince in reporting radiological examinations by personal computer. Today they describe the project of a new software which allows the reporting and filing of roentgenograms. This program was realized by a radiologist, using a well known data base management system: dBASE III. The program was shaped to fit the radiologist's needs: it helps to report, and allows to file, radiological data, with the diagnosic codes used by the American College of Radiology. In this paper the authors describe the data base structure and indicate the software functions which make its use possible. Thus, this paper is not aimed at advertising a new reporting program, but at demonstrating how the radiologist can himself manage some aspects of his work with the help of a personal computer

Prevalence of self-reported respiratory disease symptoms among veterinarians in the Southern Netherlands.

NARCIS (Netherlands)

Tielen, M.J.M.; Elbers, A.R.W.; Snijdelaar, M.; Gulick, P.J.M.M.; Preller, L.; Blaauw, P.J.

1996-01-01

In June 1991, 831 veterinarians registered in the Southern Netherlands were mailed a questionnaire to obtain details of work practice and health problems. One hundred fifty-two veterinarians were not eligible (retired or not working regularly), 497 practitioners returned a complete questionnaire

Developing of an information system for veterinarians and their clients about traveling with dogs or cats

OpenAIRE

Eggert, Anne-Dörte

2010-01-01

The objective of the information system "Pets on tour" is to give veterinarians and veterinary students the possibility to inform themselves quickly and without continuous and time consuming literature research about the "prevalence", the "clinical signs", the "diagnosis", the "therapy" and possible "prevention" of typical "traveling diseases" and other important illnesses. The computer program describes the complex subject on 981 screen pages with 44 pictures and 51 additional explanations i...

Investigating laparoscopic psychomotor skills in veterinarians and veterinary technicians.

Science.gov (United States)

Kilkenny, Jessica; Santarossa, Amanda; Mrotz, Victoria; Walker, Meagan; Monaghan, Dominique; Singh, Ameet

2017-04-01

To determine the influence of age, year of graduation, and video game experience on baseline laparoscopic psychomotor skills. Cross-sectional. Licensed veterinarians (n = 38) and registered veterinary technicians (VTs) (n = 49). A laparoscopic box trainer was set up at the 2016 Ontario Veterinary Medical Association (OVMA) and the 2016 Ontario Association of Veterinary Technicians (OAVT) conferences held in Toronto, Ontario, Canada. Participants volunteered to perform a single repetition of a peg transfer (PT) exercise. Participants were given a short demonstration of the PT task prior to testing. A Spearman's rank correlation (r s ) was used to identify associations between baseline psychomotor skills and self-reported surgical and non-surgical experiences collected via survey. Mann-Whitney U tests were used to compare PT scores in veterinarians and VTs. A P-value of  .05). Veterinary technicians that frequently used chopsticks scored higher than those without chopstick experience (P = .04). Age and year of graduation correlated inversely, while self-reported VG experience correlated positively with laparoscopic psychomotor skills of veterinarians, when assessed on a simulator. The use of chopsticks may contribute to the acquisition of psychomotor skills in VTs. © 2017 The American College of Veterinary Surgeons.

Attitudes of veterinarians, animal control directors, and county prosecutors in Michigan regarding enforcement of state animal cruelty legislation.

Science.gov (United States)

Stolt, L B; Johnson-Ifearulundu, Y J; Kaneene, J B

1997-12-15

To determine attitudes of veterinarians, animal control directors, and country prosecutors in Michigan toward enforcement of state animal cruelty legislation and to identify factors associated with whether veterinarians would report suspected cases of animal cruelty. Survey. Questionnaires were sent to 1,146 Michigan Veterinary Medical Association member veterinarians, 139 animal control directors, and 83 county prosecutors in Michigan. 740 (65%) veterinarians, 70 (50%) animal control directors, and 43 (52%) prosecutors responded. Six hundred forty six of 735 (88%) veterinarians reported having treated an animal that they believed had been a victim of animal cruelty, but only 192 of 719 (27%) had ever reported a case of animal cruelty, and only 217 of 734 (30%) had ever testified in an animal cruelty case. Logistic regression analysis of responses revealed that the only factor associated with whether veterinarians would report cases of suspected animal cruelty was the potential reactions of the involved clients to the accusation of animal cruelty. Veterinarians who rated reaction of the involved client as important, very important, or essential to their decision whether to report a case of animal cruelty were less likely to report such cases than were veterinarians who rated potential client reaction as somewhat important or unimportant. Concern about potential client reaction was the most important factor in whether veterinarians would report cases of suspected animal cruelty.

When Veterinarians Support Canine Therapy: Bidirectional Benefits for Clinics and Therapy Programs

Directory of Open Access Journals (Sweden)

John-Tyler Binfet

2018-01-01

Full Text Available This paper proposes a mutually beneficial model of collaboration between veterinarians and canine therapy programs. Veterinarians and the clinics for whom they work routinely establish collaborations with multiple and varied stakeholders. This might include a laboratory for processing samples and the corresponding courier company needed to deliver samples to the lab or a partnership with a local dog rescue organization for whom discounted rates are offered. One community partnership that stands to benefit both the clinic and the community agency, is for veterinarians to work in tandem with a local canine-assisted therapy program. The benefits to such an alliance are multifold and address aspects of veterinary medicine including client recruitment, community education, and access to a network of devoted dog enthusiasts.

Comparison of canal transportation and centering ability of hand Protaper files and rotary Protaper files by using micro computed tomography

OpenAIRE

Amit Gandhi; Taru Gandhi

2011-01-01

Introduction and objective: The aim of the present study was to compare root canal preparation with rotary ProTaper files and hand ProTaper files to find a better instrumentation technique for maintaining root canal geometry with the aid of computed tomography. Material and methods: Twenty curved root canals with at least 10 degree of curvature were divided into 2 groups of 10 teeth each. In group I the canals were prepared with hand ProTaper files and in group II the canals were prepared wit...

An analysis of opinions from veterinarians in South Africa regarding business management skills.

Science.gov (United States)

Krecek, R C; Tobin, P

2004-03-01

The changing role of veterinarians in the global market is a current topic of debate and discussion. Few countries including South Africa have formally examined the changing dynamics of this profession. Therefore, the present study addressed 2 objectives. The 1st was to examine basic information about veterinarians in South Africa including their age, gender and distribution across provinces, the percentage whose practice was urban, rural or periurban, the numbers working with specific animal species, and the extent of business management and skills previously gained. The 2nd objective was to obtain opinions and insights from veterinarians in South Africa about the challenges and opportunities facing their business practices to better understand what they considered important dynamics to their businesses today. Several areas of business on which they were questioned and which were included in this study were: marketing, vision, human resources, leadership, financial management, ethics, competition, day-to-day operations, interpersonal skills and information management. This is the 1st known survey to employ a questionnaire to gain insights and opinions from veterinarians about business management skills.

An analysis of opinions from veterinarians in South Africa regarding business management skills

Directory of Open Access Journals (Sweden)

R.C. Krecek

2004-06-01

Full Text Available The changing role of veterinarians in the global market is a current topic of debate and discussion. Few countries including South Africa have formally examined the changing dynamics of this profession. Therefore, the present study addressed 2 objectives. The 1st was to examine basic information about veterinarians in South Africa including their age, gender and distribution across provinces, the percentage whose practice was urban, rural or periurban, the numbers working with specific animal species, and the extent of business management and skills previously gained. The 2nd objective was to obtain opinions and insights from veterinarians in South Africa about the challenges and opportunities facing their business practices to better understand what they considered important dynamics to their businesses today. Several areas of business on which they were questioned and which were included in this study were: marketing, vision,humanresources, leadership, financial management, ethics, competition, day-to-day operations, interpersonal skills and information management. This is the 1st known survey to employ a questionnaire to gain insights and opinions from veterinarians about business management skills.

Short communication: study on veterinarian communication skills preferred and perceived by dairy farmers.

Science.gov (United States)

Cipolla, M; Zecconi, A

2015-04-01

Effective communication in dairy farms improves management and herd health, and it is also pivotal for public health in a "from farm to fork" perspective. This paper reports the results of a descriptive study on dairy farmers' perception of veterinarian and other consultants' communication skills. Perceived communication skills showed to be significantly lower than desired ones for all the professional figures considered. Despite these unsatisfactory results, veterinarian were the most appreciated and skilled consultants. The observed farmers' dissatisfaction increases farmers' difficulties in identifying proper targets and proper consultant. An increase in the skill of veterinarian to deliver effective and tailored messages could help to overcome the problem. Copyright © 2015 Elsevier Ltd. All rights reserved.

Opinions of veterinarians on antimicrobial use in farm animals in Flanders and the Netherlands

NARCIS (Netherlands)

Speksnijder, D. C.; Jaarsma, A. D. C.; Verheij, T. J. M.; Wagenaar, J. A.; Dewulf, J.

2016-01-01

Veterinarians play an important role in the reduction of antimicrobial use in farm animals. This study aims to quantify opinions of veterinarians from the Netherlands and Flanders regarding antimicrobial use and resistance issues in farm animals. An online survey was sent out to 678 and 1100 farm

International Evidence-Based Medicine Survey of the Veterinary Profession: Information Sources Used by Veterinarians.

Directory of Open Access Journals (Sweden)

Selene J Huntley

Full Text Available Veterinarians are encouraged to use evidence to inform their practice, but it is unknown what resources (e.g. journals, electronic sources are accessed by them globally. Understanding the key places veterinarians seek information can inform where new clinically relevant evidence should most effectively be placed. An international survey was conducted to gain understanding of how veterinary information is accessed by veterinarians worldwide. There were 2137 useable responses to the questionnaire from veterinarians in 78 countries. The majority of respondents (n = 1835/2137, 85.9% undertook clinical work and worked in a high income country (n = 1576/1762, 89.4%. Respondents heard about the survey via national veterinary organisations or regulatory bodies (31.5%, online veterinary forums and websites (22.7%, regional, discipline-based or international veterinary organisations (22.7% or by direct invitation from the researchers or via friends, colleagues or social media (7.6%. Clinicians and non-clinicians reportedly used journals most commonly (65.8%, n = 1207/1835; 75.6%, n = 216/286 followed by electronic resources (58.7%, n = 1077/1835; 55.9%, n = 160/286, respectively. Respondents listed a total of 518 journals and 567 electronic sources that they read. Differences in veterinarian preference for resources in developed, and developing countries, were found. The nominated journals most read were the Journal of the American Veterinary Medical Association (12.7% of nominations for clinicians and the Veterinary Record (5.7% for non-clinicians. The most accessed electronic resource reported was the Veterinary Information Network (25.6% for clinicians and PubMed (7.4% for non-clinicians. In conclusion, a wide array of journals and electronic resources appear to be accessed by veterinarians worldwide. Veterinary organisations appear to play an important role in global communication and outreach to veterinarians and consideration should be given to how

Dilemmas experienced by government veterinarians when responding professionally to farm animal welfare incidents in Ireland.

Science.gov (United States)

Devitt, C; Kelly, P; Blake, M; Hanlon, A; More, S J

2014-01-01

This paper identifies the dilemmas experienced by government veterinarians during their investigations of farm animal welfare incidents that involve herd owner social, health, and/or psychological difficulties. The paper builds on exploratory qualitative research into the impact of these difficulties on farm animal welfare. The study used a qualitative research approach. Focus groups were conducted. In Ireland, an Early Warning System (EWS), which brings together relevant agencies, is in place to identify and prevent farm animal welfare problems before they become critical. This study is concerned with the experiences of government veterinarians who respond to farm animal welfare incidents. Specific focus is on incidents that involve herd owner social/psychological/health-related difficulties. In total, n=18 government veterinarians (representing 15 per cent of the population sample), all with a keen interest in farm animal welfare, participated. These were selected on the basis of their interest, experience, and involvement in farm animal welfare. One government veterinarian declined to participate. Four focus groups were conducted with government veterinarians. These took place in the south (S), south-west (SW), midlands (M), and north-west region of Ireland (NW). All 16 District Veterinary Offices (DVOs) were represented in the focus groups. The results reveal three professional dilemmas that exist for government veterinarians: (1) defining professional parameters; (2) determining the appropriate response; (3) involvement versus detachment. Participants reported not wanting any additional training. Instead, it was agreed that a formal bridge to social service providers who have the professional capability to respond appropriately and with confidence, was required. Clearly defined guidelines are required for government veterinarians in their encounters with farm animal welfare incidents where there is a complex human component. A coordinated multiagency approach

Attitudes of farmers and veterinarians towards pain and the use of pain relief in pigs.

Science.gov (United States)

Ison, S H; Rutherford, K M D

2014-12-01

A survey of UK-based pig farmers and veterinarians was conducted, in order to investigate attitudes to pain and the use of pain relief in pigs. Survey respondents were asked to indicate which anti-inflammatory drugs they used or prescribed for pigs, how often these were administered, and the level of pain they associated with particular conditions. The survey found that veterinarians used a range of anti-inflammatory products to treat pigs with lameness. While both farmers and veterinarians gave similar pain scores overall, farmers rated gastrointestinal disease as more painful and conversely veterinarians scored lameness higher. Female and younger respondents gave higher pain scores than males and older respondents. Overall, farmers and veterinarians had a positive attitude towards pain relief in pigs with the majority agreeing that animals recovered more promptly when pain relief was administered. Most farmers agreed that the recognition and management of pain is an important part of pig husbandry, and many expressed an interest in finding out more about identifying pain in this species as well as the treatment options available. The study highlighted potential barriers to the increased application of pain relief in pigs in that almost one-third of veterinarians and two-thirds of farmers did not agree that they discussed pain management with each other, while other respondents indicated that they found it difficult to recognise pain in pigs, and did not know how to treat it appropriately. Copyright © 2014 Elsevier Ltd. All rights reserved.

Survey of rabies vaccination status of Queensland veterinarians and veterinary students.

Science.gov (United States)

Mendez, D; Foyle, L; Cobbold, R; Speare, R

2018-05-01

To determine the rabies vaccination status of Queensland veterinarians and veterinary students and their perception of zoonotic risk from Australian bat lyssavirus (ABLV). Cross-sectional questionnaire surveys. Questionnaires were sent by post in 2011 to veterinary surgeons registered in Queensland, to final-year veterinary students at James Cook University via SurveyMonkey® in 2013 and to final-year veterinary students at James Cook University and University of Queensland via SurveyMonkey® in 2014. The response rate for registered veterinarians was 33.5% and for veterinary students 33.3% and 30% in 2013 and 2014, respectively. Of the 466 registered veterinary surgeons, 147 (31.5%) had been vaccinated, with 72 (15.5%) currently vaccinated. For veterinary students the rabies vaccination rate was 20.0% (4/20) and 13.0% (6/46) in the 2013 and 2014 surveys, respectively. More than 95% of veterinary students had received the mandatory Q fever vaccine. Both veterinarians and students regarded bats and horses as high-risk species for zoonoses. Queensland veterinarians and veterinary students have low levels of protection against ABLV. Although incidents of ABLV spilling over from a bat to a domestic mammal are likely to remain rare, they pose a significant human health and occupational risk given the outcome of infection in humans is high consequence. Principals of veterinary practices and veterinary authorities in Australia should implement a policy of rabies vaccination for clinical staff and veterinary students. © 2018 Australian Veterinary Association.

The historical, present, and future role of veterinarians in One Health.

Science.gov (United States)

Gibbs, Samantha E J; Gibbs, E Paul J

2013-01-01

The renewed interest in the concept of One Health has occurred as a result of the increased emergence of zoonotic infectious diseases over the past decade. The subsequent impacts of these diseases on human, livestock, and wildlife health, as well as the economic effects, have given international health organizations and national governments a greater appreciation of the importance of collaborative efforts in solving health problems. The One Health concept is not new, but under its umbrella, a new generation of veterinarians, physicians, ecologists, biologists, and social scientists is shaping the concept in novel ways. This has led to increased support for One Health initiatives to control disease by international agencies, national governments, and nongovernmental organizations as well as a growing emphasis on One Health concepts in training the veterinary workforce. Veterinary schools are reorganizing veterinary education to better teach students the precepts of One Health. This chapter explores the evolution and application of the One Health concept from the perspective of the veterinarian. The veterinary profession is positioned to be a strong advocate and leader of One Health. Veterinarians have a long history of involvement with One Health activities, and this involvement has adjusted and shifted with the changing needs of society. A new area of work for veterinarians is ecosystem health, which is becoming more relevant as a result of the impact that the ever-increasing human population is having on the environment that supports them.

Role of veterinarians in recognition and prevention of animal abuse

Directory of Open Access Journals (Sweden)

Aleksić Jelena

2011-01-01

Full Text Available Since the Criminal law of the Republic of Serbia in 2005 as well as the Law on veterinary medicine, there has been an increasing number of cases that deal with raising criminal charges due to animal killing or torturing. There is also a significant number of forensic cases that are aimed at discovering criminal acts. Animal abuse is a social issue, which includes a range of behaviors of humans that are harmful to animals, starting from unintentional neglect to intentional cruelty. Types of animal abuse are different and they can include physical, sexual, emotional abuse, or neglect. Abuse and neglect of animals have a variety of forms and manifestations, but the end result is always the same - animal suffering. The connection between animal abuse, domestic violence, and child abuse indicates that there is a significant role of veterinarians in social contexts and in terms of stopping this vicious cycle by preventing, discovering and turning in suspects involved in these crimes. The help that veterinarians provide to public prosecutors is of great importance. This study shows the role of veterinarians in cases of possible animal abuse, as well as their role in processing that type of cases.

Cooperative storage of shared files in a parallel computing system with dynamic block size

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary

2015-11-10

Improved techniques are provided for parallel writing of data to a shared object in a parallel computing system. A method is provided for storing data generated by a plurality of parallel processes to a shared object in a parallel computing system. The method is performed by at least one of the processes and comprises: dynamically determining a block size for storing the data; exchanging a determined amount of the data with at least one additional process to achieve a block of the data having the dynamically determined block size; and writing the block of the data having the dynamically determined block size to a file system. The determined block size comprises, e.g., a total amount of the data to be stored divided by the number of parallel processes. The file system comprises, for example, a log structured virtual parallel file system, such as a Parallel Log-Structured File System (PLFS).

[Empirical study of the market orientation of veterinarians in The Netherlands].

Science.gov (United States)

Schuurmans, A J; Smidts, A

1990-04-01

Linked to the theoretical framework of marketing in the veterinary practice, as explained in Schuurmans and Smidts (1) pp. 1-10 and Schuurmans and Smidts (2), an empirical research project has been undertaken. This research gives insight into the extent to which practices base their services on a marketing orientation. By means of telephone inquiries among a sample of 166 veterinarians, this was investigated. The research shows that veterinarians think more in a product-oriented way than in a market-oriented way, and they do not use all the opportunities a marketing orientation could bring to their services. This expresses itself, among others by not using market segmentation, by the inadequate use of the marketing mix elements communication and distribution, and by the fact that the opportunities of the marketing information system are hardly applied. By means of further research in individual practices it might be possible to give concrete advise fit for that practice. Research among the clients of the veterinarians might, beside many other kinds of research, also give valuable insights.

The role of veterinarian in the monitoring programs of mastitis control

Science.gov (United States)

Maletić, M.; Magaš, V.; Maletić, J.

2017-09-01

Mastitis is the most common and the most expensive disease of dairy cows. It is followed by a large number of direct and indirect costs that burden the farm’s budget and lead to major economic and health losses. The veterinarian at the farm plays a key role in implementing a protocol of biosecurity measures, a protocol of control, therapy, and the suppression of clinical and subclinical mastitis. In order to successfully implement these measures, a good communication between a veterinarian and a farm staff who performs milking procedures is necessary in order to detect and treat all cases of mastitis in time.

Toward the Effective Use of Military Veterinarians in Stability Operations

National Research Council Canada - National Science Library

Moore, Melinda; Fisher, Gail

2008-01-01

.... Within the context of stability operations, military veterinarians can contribute to U.S. strategic goals of economic development and humanitarian assistance, especially related to the agriculture sector...

Expected consequences of convenience euthanasia perceived by veterinarians in Quebec

Science.gov (United States)

Rathwell-Deault, Dominick; Godard, Béatrice; Frank, Diane; Doizé, Béatrice

2017-01-01

In companion animal practice, convenience euthanasia (euthanasia of a physically and psychologically healthy animal) is recognized as one of the most difficult situations. There is little published on veterinary perceptions of the consequences of convenience euthanasia. A qualitative study on the subject based on interviews with 14 veterinarians was undertaken. The animal’s interests in the dilemma of convenience euthanasia was taken into consideration, strictly from the point of view of the physical suffering and stress related to the procedure. The veterinarian’s goal was to respect the animal’s interests by controlling physical pain. Most often, veterinarians made their own interests and those of the owners a priority when considering the consequences of their decision to perform or refuse convenience euthanasia. PMID:28698691

Pattern of skin diseases and occupational dermatoses in veterinarians and veterinary workers of Kashmir

Directory of Open Access Journals (Sweden)

Sumaya Zeerak

2017-01-01

Full Text Available Background: Across the globe, skin disorders represent a frequent occupational concern for many health professionals including veterinarians and there is a serious impact of skin diseases on their lives and careers. But little is known about the prevalence and distribution of skin diseases (especially occupational within this important professional group across Asia, especially India. Materials and Methods: The study was a cross-sectional study carried out over a period of one year in which veterinarians and veterinary workers of Kashmir valley were screened for various skin diseases and occupational dermatoses. Results: The study group comprised 910 veterinarians and associated workers working across the valley with the majority being males; 846 workers (93%. The mean age of the group was 38.53 years. Out of these, 267 veterinarians and associated workers (29.3% were found to have skin lesions. Of the 267 cases, 165 (61.80% had non-infectious lesions, while the rest had 102 (38.20% had infectious skin diseases. The main non-infectious lesions included friction-related disorders, eczemas, pigmentary disorders, papulosquamous disorders, and many others; while the infectious lesions were of fungal, bacterial, viral, and parasitic etiology. Fungal infections, eczemas, and melasma were more common in them, indicating an occupational etiology. Conclusion: A huge group of skin diseases was seen in veterinarians and veterinary workers, with some diseases showing an occupational nature. To reduce the burden of skin diseases in this particular group, proper prevention measures need to be instituted at work places by veterinary governing bodies of the state.

Toward the Effective Use of Military Veterinarians in Stability Operations

National Research Council Canada - National Science Library

Moore, Melinda; Fisher, Gail

2008-01-01

... operations, all core missions and of equal importance. In active theaters such as Afghanistan and Iraq, medical civil-military stability operations figure prominently and include activities carried out by military veterinarians...

Attitude of Brazilian veterinarians in the recognition and treatment of pain in horses and cattle.

Science.gov (United States)

Lorena, Sílvia E R S; Luna, Stélio P L; Lascelles, B Duncan X; Corrente, José E

2013-07-01

The objective of this study was to assess the use of analgesics, describe the attitudes of Brazilian veterinarians towards pain relief in horses and cattle and evaluate the differences due to gender, year of graduation and type of practice. Prospective survey. Questionnaires were sent to 1000 large animal veterinarians by mail, internet and delivered in person during national meetings. The survey investigated the attitudes of Brazilian veterinarians to the recognition and treatment of pain in large animals and consisted of sections asking about demographic data, use of analgesic drugs, attitudes to pain relief and to the assessment of pain. Descriptive statistics were used to analyze frequencies. Simple post hoc comparisons were performed using the chi-square test. Eight hundred questionnaires were collected, but 87 were discarded because they were incomplete or blank. The opioid of choice for use in large animals was butorphanol (43.4%) followed by tramadol (39%). Flunixin (83.2%) and ketoprofen (67.6%) were the most frequently used NSAIDs by Brazilian veterinarians. Respondents indicated that horses received preoperative analgesics for laparotomy more frequently (72.9%) than cattle (58.5%). The most frequently administered preoperative drugs for laparotomy in horses were flunixin (38.4%) and xylazine (23.6%), whereas the preoperative drugs for the same surgical procedure in cattle were xylazine (31.8%) and the local administration of lidocaine (48%). Fracture repair was considered the most painful surgical procedure for both species. Most veterinarians (84.1%) believed that their knowledge in this area was not adequate. Although these Brazilian veterinarians thought that their knowledge on recognition and treatment of pain was not adequate, the use of analgesic in large animals was similar in Brazil to that reported in other countries. © 2013 The Authors. Veterinary Anaesthesia and Analgesia © 2013 Association of Veterinary Anaesthetists and the American

Legally protecting and compelling veterinarians in issues of animal abuse and domestic violence.

Science.gov (United States)

Robertson, I A

2010-06-01

The majority of veterinarians recognise their important role and responsibility to society and animal welfare in the detection and reporting of suspected abuse of animals and humans. In spite of the existing moral, ethical, and legal duties applied to veterinarians, they face substantial barriers that prohibit them from fulfilling their professional role in handling cases of suspected abuse. With increasing public and legal attention on issues of animal welfare, the non-fulfillment of these duties places the profession and its members at considerable risk of public criticism and adverse legal accountability. The issue is raised here that the veterinary profession in New Zealand needs to provide a clear policy statement and take pro-active measures that provide practical enforceable solutions to these existing barriers and legal risks. Such an initiative will assist in ensuring that all registered members consistently fulfil their obligations, and are legally protected while doing so. Veterinary counterparts overseas already provide a legislative immunity for their veterinarians who report suspected abuse as part of a mandated duty to report. Implementation of such a duty has significant benefits for all veterinarians, including the requirement for education and effective support systems. In the absence of such a mandatory duty, intermediary measures can be introduced, demonstrating social responsibility and commitment by the profession to their existing duty of care.

Veterinarian challenges to providing a multi-agency response to farm animal welfare problems in Ireland: responding to the human factor.

Science.gov (United States)

Devitt, C; Kelly, P; Blake, M; Hanlon, A; More, S J

2013-12-01

In 2012, the authors undertook a study of the challenges facing government and private veterinarians in responding to the human element of farm animal welfare incidents (i.e. the personal problems and difficulties of farmers that can result in farm animal neglect). This paper reports their findings and examines the role of veterinarians in responding to the difficulties of farmers. It also looks at their experiences of attempting to build a multi-agency approach involving veterinary and human support services. This paper builds on a study whereby the authors considered how social, health and attitudinal factors, as well as mental health problems, contribute to farm animal welfare incidents in Ireland. An early warning system involving relevant agencies is in place to identify and prevent farm animal welfare problems before they become critical. The literature provides examples of private veterinarians combining with support services where there are indicators of animal and human abuse. Yet there are no research examples of government or private veterinarians linking with support services to resolve farm animal welfare cases where there are social, health, and/or mental health difficulties with the herd owner. Four focus groups were conducted with government veterinarians (n = 18) and three with private veterinarians (n = 12). Government veterinarians made contact with support services to seek advice on how best to respond to the human element of farm animal welfare incidents, and/or to seek support for the herd owner. Contact between government and private veterinarians was driven by the former. Communication between agencies was influenced by individual efforts and personal contacts. Formal structures and guidelines, perceived professional capabilities in determining herd owner needs, and client confidentiality concerns among support services and private veterinarians were less influential. The fear of losing clients and the financial implications of this were

The crucial contribution of veterinarians to conservation biology.

Science.gov (United States)

Reading, Richard P; Kenny, David E; Fitzgerald, Kevin T

2013-11-01

Conservation biology is a relatively new (began in the 1980s), value-based discipline predicated on the belief that biological diversity-from genes to populations to species to communities to ecosystems-is good and extinction is bad. Conservation biology grew from the recognition that the Earth has entered its sixth great extinction event, one that differs from previous great extinctions in that a single species-Homo sapiens-has caused this biodiversity crisis. A diverse, interacting set of variables drive current extinctions. As such, to succeed, conservation efforts usually require broad-based, interdisciplinary approaches. Conservationists increasingly recognize the importance of contributions by veterinary science, among many other disciplines, to collaborative efforts aimed at stemming the loss of biodiversity. We argue that, to improve success rates, many wildlife conservation programs must incorporate veterinarians as part of an interdisciplinary team to assess and address problems. Ideally, veterinarians who participate in conservation would receive specialized training and be willing to work as partners as part of a larger team of experts who effectively integrate their work rather than work independently (i.e., work as interdisciplinary, as opposed to multidisciplinary, teams, respectively). In our opinion, the most successful and productive projects involve interdisciplinary teams involving both biological and nonbiological specialists. Some researchers hold multiple degrees in biology and veterinary medicine or the biological and social sciences. These experts can often offer unique insight. We see at least 3 major areas in which veterinarians can immediately offer great assistance to conservation efforts: (1) participation in wildlife capture and immobilization, (2) leadership or assistance in addressing wildlife health issues, and (3) leadership or assistance in addressing wildlife disease issues, including using wildlife as sentinels to identify new

Zoonotic disease risk perceptions and infection control practices of Australian veterinarians: call for change in work culture.

Science.gov (United States)

Dowd, Karen; Taylor, Melanie; Toribio, Jenny-Ann L M L; Hooker, Claire; Dhand, Navneet K

2013-08-01

This study was conducted to determine the perceptions of zoonotic disease risk among Australian veterinarians, the infection control practices they use to protect themselves from zoonotic diseases, and the factors influencing their use of these protective practices. A questionnaire was designed and piloted prior to its administration to veterinarians at the annual Australian Veterinary Association Conference in May 2011. The questionnaire comprised 21 closed, semi-closed and open questions. Data from the questionnaire were analyzed using ordinal logistic regression analyses to determine significant factors for veterinarians' use of personal protective equipment (PPE). A total of 344 veterinarians completed the questionnaire of which 63.7% were women, 63.2% worked in small/companion animal practice, and 79.9% worked in private veterinary practice. Of the respondents, 44.9% reported contracting a zoonosis during their careers with 19.7% reporting a suspected case and 25.2% reporting a confirmed incidence. Around 40-60% of veterinarians perceived exposure to zoonosis likely or very likely in a variety of situations. With reference to current national industry guidelines, the reported use of PPE was less than "adequate" for most scenarios except for performing postmortems, surgery or dental procedures. No PPE was used by 60-70% of veterinarians for treating respiratory and neurological cases and by 40-50% when treating gastrointestinal and dermatological cases. Workplace conditions need improvement as 34.8% of workplaces did not have isolation units for infected animals, 21.1% did not have separate eating areas for staff, and 57.1% did not have complete PPE kits for use. Veterinarians were more likely to use PPE if they had undertaken postgraduate education, perceived that zoonosis exposure from animals and procedures was likely, consciously considered PPE use for every case they dealt with and believed that liability issues and risks encouraged use of PPE. In contrast

Survey of how different groups of veterinarians manage the use of neuromuscular blocking agents in anesthetized dogs.

Science.gov (United States)

Martin-Flores, Manuel; Sakai, Daniel M; Campoy, Luis; Gleed, Robin D

2018-03-23

To analyze practice habits associated with the use, reversal and monitoring of nondepolarizing neuromuscular blocking agents (NMBAs) in dogs by different groups of veterinarians. Online anonymous survey to veterinarians. Data from 390 answered surveys. A questionnaire was sent to e-mail list servers of the American College of Veterinary Anesthesia and Analgesia (ACVAA-list), Sociedad Española de Anestesia y Analgesia Veterinaria (SEEAV-list), Colégio Brasileiro de Anestesiologia Veterinária (Brazilian College of Veterinary Anesthesiology; CBAV-list) and American College of Veterinary Ophthalmologists (ACVO-list) to elicit information regarding use of NMBAs and reversal agents, monitoring techniques, criteria for redosing, reversing and assessing adequacy of recovery of neuromuscular function. Binomial logistic regression was used to test for association between responses and group of veterinarians in selected questions. Veterinarians of the ACVO-list use NMBAs on a higher fraction of their caseload than other groups (all p < 0.0001). Subjective assessment (observation) of spontaneous movement, including spontaneous breathing, is the most common method for assessing neuromuscular function (43% of pooled responses); 18% of participants always reverse NMBAs, whereas 16% never reverse them. Restoration of neuromuscular function is assessed subjectively by 35% of respondents. Residual neuromuscular block is the most common concern regarding the use of NMBAs for all groups of veterinarians. Side effects of reversal agents (anticholinesterases) were of least concern for all groups. While most veterinarians are concerned about residual neuromuscular block, relatively few steps are implemented to reduce the risks of this complication, such as routine use of quantitative neuromuscular monitoring or routine reversal of NMBAs. These results suggest a limitation in transferring information among groups of veterinarians, or in implementing techniques suggested by scientific

A survey of Tennessee veterinarian and physician attitudes, knowledge, and practices regarding zoonoses prevention among animal owners with HIV infection or AIDS.

Science.gov (United States)

Hill, William Allen; Petty, Gregory C; Erwin, Paul C; Souza, Marcy J

2012-06-15

To examine the attitudes, knowledge, and practices of Tennessee veterinarians and physicians engaged in clinical practice regarding the risk for and prevention of zoonoses in people with HIV infection or AIDS. Cross-sectional survey. Licensed Tennessee veterinarians and physicians engaged in clinical practice. A survey was mailed in January 2010 to 454 licensed veterinarians and 1,737 licensed physicians. 181 of 419 (43.20%) eligible veterinarians and 201 of 1,376 (14.61%) eligible physicians responded to the survey. A majority of both veterinarians (131/179 [73.18%]) and physicians (97/192 [50.52%]) indicated that veterinarians should always or almost always be involved in advising clients with HIV infection or AIDS. The majority of veterinarians (120/173 [69.36%]) indicated they always or almost always discussed with clients the potential risk to immune-compromised persons after diagnosing a zoonosis. A high proportion (88/94 [93.62%]) of physicians indicated they never or rarely initiated discussions about zoonoses with patients with HIV infection or AIDS. All physicians (94/94 [100%]) indicated they never or rarely contacted veterinarians for advice on zoonoses. Similarly, 174 of 180 (96.76%) veterinarians had never or rarely contacted physicians for advice on zoonoses risks. Only 25.97% of veterinarians and 33.33% of physicians were correctly able to identify zoonotic pathogens of greatest concern to people with HIV infection or AIDS. We identified several implications for veterinary medical and medical practice that may reduce zoonoses transmission risks for people with HIV infection or AIDS, including increased communication between veterinarians and physicians, increased communication between people with HIV infection or AIDS and health-care providers, increased availability of client educational materials, and increased participation in zoonoses continuing education opportunities by health-care providers.

Long term file migration. Part I: file reference patterns

International Nuclear Information System (INIS)

Smith, A.J.

1978-08-01

In most large computer installations, files are moved between on-line disk and mass storage (tape, integrated mass storage device) either automatically by the system or specifically at the direction of the user. This is the first of two papers which study the selection of algorithms for the automatic migration of files between mass storage and disk. The use of the text editor data sets at the Stanford Linear Accelerator Center (SLAC) computer installation is examined through the analysis of thirteen months of file reference data. Most files are used very few times. Of those that are used sufficiently frequently that their reference patterns may be examined, about a third show declining rates of reference during their lifetime; of the remainder, very few (about 5%) show correlated interreference intervals, and interreference intervals (in days) appear to be more skewed than would occur with the Bernoulli process. Thus, about two-thirds of all sufficiently active files appear to be referenced as a renewal process with a skewed interreference distribution. A large number of other file reference statistics (file lifetimes, interference distributions, moments, means, number of uses/file, file sizes, file rates of reference, etc.) are computed and presented. The results are applied in the following paper to the development and comparative evaluation of file migration algorithms. 17 figures, 13 tables

Opinions of veterinarians on antimicrobial use in farm animals in Flanders and the Netherlands.

Science.gov (United States)

Postma, M; Speksnijder, D C; Jaarsma, A D C; Verheij, T J M; Wagenaar, J A; Dewulf, J

2016-07-16

Veterinarians play an important role in the reduction of antimicrobial use in farm animals. This study aims to quantify opinions of veterinarians from the Netherlands and Flanders regarding antimicrobial use and resistance issues in farm animals. An online survey was sent out to 678 and 1100 farm animal veterinarians in Flanders and the Netherlands, of which 174 and 437 were returned respectively. Suboptimal climate conditions were regarded as the most important cause for high antimicrobial use in farm animals. Flemish veterinarians also regarded insufficient biosecurity measures and farmers' mentality as important determinants, while the Dutch respondents ranked insufficient immunity of young animals and economic considerations of farmers as major causes. The majority of Dutch respondents (63.8 per cent) supported the existing national policy, which aimed to halve veterinary antimicrobial use, while the Flemish (32.9 per cent) were less supportive of such a policy. Improvements in housing and climate conditions, biosecurity measures and strict control of specific infectious diseases were seen as important and promising measures to reduce antimicrobial use. To reduce antimicrobial use in farm animals, some shared approaches might be applicable in both countries. However, cultural, political and societal differences between Flanders and the Netherlands require differentiated approaches to reduce veterinary antimicrobial use. British Veterinary Association.

Food safety in a nuclear crisis: The role of the veterinarian.

Science.gov (United States)

Waltner-Toews, D

1990-05-01

Veterinarians are integrally involved in the maintenance of a safe and sufficient food supply; this involvement may be put to the test when a crisis - particularly a nuclear crisis - occurs. Few people can be said to be experts in how to ensure a safe food supply in a nuclear crisis. However, a working knowledge of radionuclides and how they behave in the food system, and the ability to identify high-risk foods and high-risk consumers in a crisis situation should be a part of the education of all veterinarians. In this paper I review those features of postdisaster radionuclide contamination of the food chain most relevant to veterinary activities in ensuring a safe food supply.

Canine obesity: is there a difference between veterinarian and owner perception?

Science.gov (United States)

White, G A; Hobson-West, P; Cobb, K; Craigon, J; Hammond, R; Millar, K M

2011-12-01

The overall aim of this study was to examine the nature of the relationship between dog-ownership and canine obesity, explored in two cohorts of overweight/obese or non-overweight dogs (n=125). This paper concentrates on the owners' perception of dog weight. A researcher-mediated questionnaire was used to collect data from dog owners attending a small veterinary practice. Interviewees (n=121) were asked qualitative and quantitative questions, designed to examine the owners' views of their relationship with their dogs. Although a high proportion of owners claimed to have discussed the dog's weight with their veterinarian, some discrepancies were apparent between owner perception of animal weight and the veterinarian's evaluation of body condition score. Owner disagreement was significantly greater for the veterinarian-defined overweight dogs (P=0·005). Owners often provide personal narratives to account for their dog's weight status. This study confirms the important role of the vet in providing information about the issue of dog weight but also suggests that providing verbal information is sometimes insufficient. The study also indicates the potential value of qualitative research methods to further understand client perception of complex animal care issues and highlights the need for further in-depth research. © 2011 British Small Animal Veterinary Association.

Factors influencing antibiotic prescribing habits and use of sensitivity testing amongst veterinarians in Europe

OpenAIRE

De Briyne, N.; Atkinson, J.; Pokludov?, L.; Borriello, S. P.; Price, S.

2013-01-01

The Heads of Medicines Agencies and the Federation of Veterinarians of Europe undertook a survey to gain a better insight into the decision-making process of veterinarians in Europe when deciding which antibiotics to prescribe. The survey was completed by 3004 practitioners from 25 European countries. Analysis was to the level of different types of practitioner (food producing (FP) animals, companion animals, equines) and country for Belgium, Czech Republic, France, Germany, Spain, Sweden and...

7 CFR 3431.5 - Solicitation of veterinarian shortage situations.

Science.gov (United States)

2010-01-01

... Secretary reserves the right to solicit veterinarian shortage situations every year or every three years, as... of nominations that may be submitted by each State animal health official. (e) Nominations... the position is not secured. (f) Nominating Official. The State animal health official in each state...

Attitudes of Austrian veterinarians towards euthanasia in small animal practice: impacts of age and gender on views on euthanasia

OpenAIRE

Hartnack, Sonja; Springer, Svenja; Pittavino, Marta; Grimm, Herwig

2016-01-01

Background Euthanasia of pets has been described by veterinarians as ?the best and the worst? of the profession. The most commonly mentioned ethical dilemmas veterinarians face in small animal practice are: limited treatment options due to financial constraints, euthanizing of healthy animals and owners wishing to continue treatment of terminally ill animals. The aim of the study was to gain insight into the attitudes of Austrian veterinarians towards euthanasia of small animals. This include...

[Mass culling in the context of animal disease outbreaks--veterinarians caught between ethical issues and control policies].

Science.gov (United States)

Hartnack, Sonja; Doherr, Marcus G; Grimm, Herwig; Kunzmann, Peter

2009-04-01

In recent years controversial discussions arose during major animal disease outbreaks in the EU about the ethical soundness of mass culling. In contrast to numerous publications about ethical issues and laboratory animals/animal experiments, literature concerning ethical deliberations in the case of mass culling as a means of outbreak control remain scarce. Veterinarians in charge of decision about and implementation of mass culling actions find themselves in an area of conflict in between the officially required animal disease control policy and a public that is increasingly critical. Those veterinarians are faced with the challenge to defend the relevant decisions against all stakeholders and also themselves. In this context an interdisciplinary workshop was initiated in Switzerland in October 2007 with ethicians and (official) veterinarians from Germany, Switzerland and Austria. With the aim to identify ethical components of animal disease control for official veterinarians, talks and moderated group discussions took place. This article summarizes selected discussion points and conclusions.

Attitudes and perceptions of Dutch veterinarians on their role in the reduction of antimicrobial use in farm animals

NARCIS (Netherlands)

Speksnijder, David C.; Jaarsma, Debbie A C; Verheij, Theo J M; Wagenaar, Jaap A.

2015-01-01

Little is known about attitudes of veterinarians towards antibiotic use and reduction opportunities, and their interaction with farmers herein. Therefore, a questionnaire was developed and sent out to Dutch farm animal veterinarians. The response rate was 40%. Categorical Principal Component

Attitudes and perceptions of Dutch veterinarians on their role in the reduction of antimicrobial use in farm animals

NARCIS (Netherlands)

Speksnijder, David C.; Jaarsma, Debbie A.C.; Verheij, Theo J.M.; Wagenaar, Jaap A.

2015-01-01

Little is known about attitudes of veterinarians towards antibiotic use and reduction opportunities, and their interaction with farmers herein. Therefore, a questionnaire was developed and sent out to Dutch farm animal veterinarians. The response rate was 40%. Categorical Principal Component

Respective influence of veterinarians and local institutional stakeholders on the event-driven surveillance system for bovine brucellosis in France.

Science.gov (United States)

Bronner, Anne; Morignat, Eric; Calavas, Didier

2015-08-01

The event-driven surveillance system for bovine brucellosis implemented in France aims to ensure the early detection of cases of bovine brucellosis, a disease of which the country has been declared free since 2005. It consists of mandatory notification of bovine abortions by farmers and veterinarians. However, as underlined by a previous qualitative study, several factors influence the decision-making process of actors in the field. This process is particularly influenced by the level of cooperation between institutional stakeholders in their département (a French département being an administrative and territorial unit), veterinarians and farmers. In this context, the objectives of this study were 1) to quantify the respective influence of veterinarians and all local institutional stakeholders on the proportion of notifying farmers and identify which actors have most influence on farmers' decisions; 2) to analyse whether the influence of veterinarians is correlated with that of local institutional stakeholders. In addition to factors relating to the farm itself (production type and herd size), the proportion of notifying farmers was influenced by the number of veterinarians per practice and the veterinary practice's membership of a technical association. This proportion was also influenced by unknown factors relating to the veterinary practice and, to a lesser extent, the département in which the farm was located. There was no correlation between variability in the proportion of notifying farmers among veterinary practices per département and the effect of the département itself. To our knowledge, this is the first study to quantify the influence of veterinarians and local institutional stakeholders on the notification process for a mandatory disease. In addition to carrying out regulatory interventions, veterinarians play a major role in encouraging farmers to participate in the surveillance systems. The results of this study, combined with a previous

Sheep farmer opinions on the current and future role of veterinarians in flock health management on sheep farms: A qualitative study

Science.gov (United States)

Kaler, Jasmeet; Green, L.E.

2013-01-01

A 2009 UK Government report on veterinary expertise in food animal production highlighted that there was insufficient herd health expertise among veterinarians and lack of appropriate business models to deliver veterinary services to the livestock sector. Approximately two thirds of sheep farmers only contact their veterinarian for emergencies and one fifth have all year round contact. The aim of the current study was to understand sheep farmers’ perception, the current and future role of veterinarians in flock health management using qualitative methodology. The eligibility criteria were male farmers with a flock size of at least 200 adult sheep. Seven focus groups of farmers (n = 45) stratified by three regions and two age groups (≤50 and >50) were conducted. Thematic analysis of the discussions indicated that most farmers considered and used their veterinarian as a fire-fighter, whilst other advice was gathered free of charge when the veterinarian was on the farm for other reasons (typically seeing cattle) or by telephone. A small group of farmers were using their veterinarian or a sheep consultant proactively with regular contact and found this financially beneficial. Farmers indicated that the key barriers to using a veterinarian proactively were inconsistent service, high turnover of veterinarians, lack of expertise of sheep farming among veterinarians and concern about independence of advice. Although economics was also mentioned as a key barrier to using veterinarians more proactively, most farmers did not know where they gained and lost income from their flock; there was heavy reliance on the single farm payment scheme (SPS) and very few farmers kept records from which they could investigate where there were inefficiencies in production. Overall sheep farmers considered sheep farming complex and that each farm was unique and that they themselves were the experts to manage their flock. We conclude that there is an impasse: veterinarians might need to

File and metadata management for BESIII distributed computing

International Nuclear Information System (INIS)

Nicholson, C; Zheng, Y H; Lin, L; Deng, Z Y; Li, W D; Zhang, X M

2012-01-01

The BESIII experiment at the Institute of High Energy Physics (IHEP), Beijing, uses the high-luminosity BEPCII e + e − collider to study physics in the π-charm energy region around 3.7 GeV; BEPCII has produced the worlds largest samples of J/φ and φ’ events to date. An order of magnitude increase in the data sample size over the 2011-2012 data-taking period demanded a move from a very centralized to a distributed computing environment, as well as the development of an efficient file and metadata management system. While BESIII is on a smaller scale than some other HEP experiments, this poses particular challenges for its distributed computing and data management system. These constraints include limited resources and manpower, and low quality of network connections to IHEP. Drawing on the rich experience of the HEP community, a system has been developed which meets these constraints. The design and development of the BESIII distributed data management system, including its integration with other BESIII distributed computing components, such as job management, are presented here.

Transfer of numeric ASCII data files between Apple and IBM personal computers.

Science.gov (United States)

Allan, R W; Bermejo, R; Houben, D

1986-01-01

Listings for programs designed to transfer numeric ASCII data files between Apple and IBM personal computers are provided with accompanying descriptions of how the software operates. Details of the hardware used are also given. The programs may be easily adapted for transferring data between other microcomputers.

9 CFR 2.33 - Attending veterinarian and adequate veterinary care.

Science.gov (United States)

2010-01-01

... veterinary care. 2.33 Section 2.33 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE... adequate veterinary care. (a) Each research facility shall have an attending veterinarian who shall provide adequate veterinary care to its animals in compliance with this section: (1) Each research facility shall...

[The attitude of German veterinarians towards farm animal welfare: results of a cluster analysis].

Science.gov (United States)

Heise, Heinke; Kemper, Nicole; Theuvsen, Ludwig

2016-01-01

In recent years the issue of animal welfare in intensive livestock production systems has been subjected to increasing criticism from the broad public. Some groups in society ask for higher animal welfare standards and there is an increas- ing number of consumers who prefer meat from more animal friendly husbandry systems. An intense social debate on animal welfare has flared up in the recent past. Veterinarians are considered as experts for the assessment of animal welfare. Nevertheless they are rarely consulted in the current debate. Therefore, only little is known about their attitude towards animal welfare in livestock farming. Even for Germany, there is so far no comprehensive analysis about their atti- tudes towards animal welfare and animal welfare programs. In the present study, 433 veterinarians were questioned via an online survey. The results show that veterinarians have a very differentiated perception of the issue animal welfare. Four groups (clusters) which have different attitudes towards livestock farming, voluntary animal welfare programs, farm size and the effects of national animal welfare standards were identified.

A focused ethnographic study of Alberta cattle veterinarians' decision making about diagnostic laboratory submissions and perceptions of surveillance programs.

Directory of Open Access Journals (Sweden)

Kate Sawford

Full Text Available The animal and public health communities need to address the challenge posed by zoonotic emerging infectious diseases. To minimize the impacts of future events, animal disease surveillance will need to enable prompt event detection and response. Diagnostic laboratory-based surveillance systems targeting domestic animals depend in large part on private veterinarians to submit samples from cases to a laboratory. In contexts where pre-diagnostic laboratory surveillance systems have been implemented, this group of veterinarians is often asked to input data. This scenario holds true in Alberta where private cattle veterinarians have been asked to participate in the Alberta Veterinary Surveillance Network-Veterinary Practice Surveillance, a platform to which pre-diagnostic disease and non-disease case data are submitted. Consequently, understanding the factors that influence these veterinarians to submit cases to a laboratory and the complex of factors that affect their participation in surveillance programs is foundational to interpreting disease patterns reported by laboratories and engaging veterinarians in surveillance. A focused ethnographic study was conducted with ten cattle veterinarians in Alberta. Individual in-depth interviews with participants were recorded and transcribed to enable thematic analysis. Laboratory submissions were biased toward outbreaks of unknown cause, cases with unusual mortality rates, and issues with potential herd-level implications. Decreasing cattle value and government support for laboratory testing have contributed to fewer submissions over time. Participants were willing participants in surveillance, though government support and collaboration were necessary. Changes in the beef industry and veterinary profession, as well as cattle producers themselves, present both challenges and opportunities in surveillance.

Nordic veterinarians' threshold for medical treatment of dairy cows, influence on disease recording and medicine use

DEFF Research Database (Denmark)

Espetvedt, Mari N.; Rintakoski, Simo; Wolff, Cecilia

2013-01-01

these thresholds may increase the understanding of prudent use of antibiotics. The primary objective of this study was to investigate whether Nordic veterinarians, on a between country-level, vary in their intention to start medical treatment of a dairy cow with mild clinical mastitis, on the same day as making......National databases for dairy cows in the four Nordic countries, Denmark, Finland, Norway and Sweden, have been found to capture varying proportions of disease events on farm. A variation in the thresholds of veterinarians to initiate medical treatment may be a reason for this. Studying...... countries the specific attitude belief of highest influence was that starting treatment the same day as diagnosing a case of mild clinical mastitis gives the best result, compared to delaying treatment. The varying intentions of veterinarians to initiate medical treatment are likely to influence centrally...

Risk factors associated with airway allergic diseases from exposure to laboratory animal allergens among veterinarians.

Science.gov (United States)

Krakowiak, Anna; Wiszniewska, Marta; Krawczyk, Patrycja; Szulc, Bogdan; Wittczak, Tomasz; Walusiak, Jolanta; Pałczynski, Cezary

2007-05-01

Investigate the risk factors for the development of occupational airway allergy (OAA) from exposure to laboratory animal allergens (LAA) among Polish veterinarians. Two hundred veterinarians responded to the questionnaire and were subjected to skin prick test (SPT) to common allergens and LAA (rat, mouse, hamster, guinea pig, rabbit). Evaluation of total serum IgE level and specific IgE against occupational allergens was performed. In addition, bronchial hyperreactivity (BHR) and peak expiratory flow rate (PEFR) were measured before and after specific challenge testing (SCT) only in the subjects with work-related symptoms suggestive of occupational asthma (OA). The prevalence of asthmatic and ocular symptoms was statistically more prevalent in the group of veterinarians sensitised to LAA versus non-sensitised subjects. The most frequent occupational allergens of skin and serum reactivity were LAA (44.5 and 31.5%, respectively). In 41 (20.5%) and in 22 (11%) subjects out of 200 veterinarians, serum specific IgE to natural rubber latex (NRL) allergens and disinfectants was also found. Serum sensitisation to cat allergens and daily contact with laboratory animals (LA) increased the risk for developing isolated occupational rhinitis. Furthermore, working time of more than 10 years and daily contact with LA were also significant risk factors for the development of OAA. Measuring PEFR and BHR before and after SCT is a useful method to confirm the presence of OA. Allergy to LAA is an important health problem among veterinary medicine practitioners in Poland.

Development of a taxonomy of practice-related stressors experienced by veterinarians in the United States

Science.gov (United States)

Vande Griek, Olivia H.; Clark, Malissa A.; Witte, Tracy K.; Nett, Randall J.; Moeller, Amanda N.; Stabler, Margaret E.

2018-01-01

OBJECTIVE To develop a comprehensive taxonomy of practice-related stressors experienced by US veterinarians. DESIGN Cross-sectional survey. SAMPLE A subset of 1,422 US veterinarians who provided written (vs selected) responses to a question in a previous survey regarding practice-related stressors. PROCEDURES Using grounded theory analysis, 3 researchers inductively analyzed written survey responses concerning respondents’ main practice-related stressors. In 5 iterations, responses were individually coded and categorized, and a final list of practice-related stressor categories and subcategories was iteratively and collaboratively developed until theoretical and analytic saturation of the data was achieved. RESULTS A taxonomy of 15 categories of broad practice-related stressors and 40 subcategories of more specific practice-related stressors was developed. The most common practice-related stressor categories included financial insecurity (n = 289 [20.3%]), client issues (254 [17.9%]), coworker or interpersonal issues (181 [12.7%]), and work-life balance (166 [11.7%]). The most common subcategories were clients unwilling to pay (118 [8.3%]), low income (98 [6.9%]), cost of maintaining practice (56 [3.9%]), and government or state board policies (48 [3.4%]). CONCLUSIONS AND CLINICAL RELEVANCE This study provided a comprehensive list of the types of practice-related stressors experienced by US veterinarians, building a foundation for future research into relationships between job stress and mental health in this population. Frequency data on the various stressors provided an initial understanding of factors that might be contributing to high stress rates among US veterinarians. PMID:29319445

Development of a taxonomy of practice-related stressors experienced by veterinarians in the United States.

Science.gov (United States)

Vande Griek, Olivia H; Clark, Malissa A; Witte, Tracy K; Nett, Randall J; Moeller, Amanda N; Stabler, Margaret E

2018-01-15

OBJECTIVE To develop a comprehensive taxonomy of practice-related stressors experienced by US veterinarians. DESIGN Cross-sectional survey. SAMPLE A subset of 1,422 US veterinarians who provided written (vs selected) responses to a question in a previous survey regarding practice-related stressors. PROCEDURES Using grounded theory analysis, 3 researchers inductively analyzed written survey responses concerning respondents' main practice-related stressors. In 5 iterations, responses were individually coded and categorized, and a final list of practice-related stressor categories and subcategories was iteratively and collaboratively developed until theoretical and analytic saturation of the data was achieved. RESULTS A taxonomy of 15 categories of broad practice-related stressors and 40 subcategories of more specific practice-related stressors was developed. The most common practice-related stressor categories included financial insecurity (n = 289 [20.3%]), client issues (254 [17.9%]), coworker or interpersonal issues (181 [12.7%]), and work-life balance (166 [11.7%]). The most common subcategories were clients unwilling to pay (118 [8.3%]), low income (98 [6.9%]), cost of maintaining practice (56 [3.9%]), and government or state board policies (48 [3.4%]). CONCLUSIONS AND CLINICAL RELEVANCE This study provided a comprehensive list of the types of practice-related stressors experienced by US veterinarians, building a foundation for future research into relationships between job stress and mental health in this population. Frequency data on the various stressors provided an initial understanding of factors that might be contributing to high stress rates among US veterinarians.

Trust in social computing. The case of peer-to-peer file sharing networks

Directory of Open Access Journals (Sweden)

Heng Xu

2011-09-01

Full Text Available Social computing and online communities are changing the fundamental way people share information and communicate with each other. Social computing focuses on how users may have more autonomy to express their ideas and participate in social exchanges in various ways, one of which may be peer-to-peer (P2P file sharing. Given the greater risk of opportunistic behavior by malicious or criminal communities in P2P networks, it is crucial to understand the factors that affect individual’s use of P2P file sharing software. In this paper, we develop and empirically test a research model that includes trust beliefs and perceived risks as two major antecedent beliefs to the usage intention. Six trust antecedents are assessed including knowledge-based trust, cognitive trust, and both organizational and peer-network factors of institutional trust. Our preliminary results show general support for the model and offer some important implications for software vendors in P2P sharing industry and regulatory bodies.

A focused ethnographic study of Sri Lankan government field veterinarians' decision making about diagnostic laboratory submissions and perceptions of surveillance.

Directory of Open Access Journals (Sweden)

Kate Sawford

Full Text Available The global public health community is facing the challenge of emerging infectious diseases. Historically, the majority of these diseases have arisen from animal populations at lower latitudes where many nations experience marked resource constraints. In order to minimize the impact of future events, surveillance of animal populations will need to enable prompt event detection and response. Many surveillance systems targeting animals rely on veterinarians to submit cases to a diagnostic laboratory or input clinical case data. Therefore understanding veterinarians' decision-making process that guides laboratory case submission and their perceptions of infectious disease surveillance is foundational to interpreting disease patterns reported by laboratories and engaging veterinarians in surveillance initiatives. A focused ethnographic study was conducted with twelve field veterinary surgeons that participated in a mobile phone-based surveillance pilot project in Sri Lanka. Each participant agreed to an individual in-depth interview that was recorded and later transcribed to enable thematic analysis of the interview content. Results found that field veterinarians in Sri Lanka infrequently submit cases to laboratories--so infrequently that common case selection principles could not be described. Field veterinarians in Sri Lanka have a diagnostic process that operates independently of laboratories. Participants indicated a willingness to take part in surveillance initiatives, though they highlighted a need for incentives that satisfy a range of motivations that vary among field veterinarians. This study has implications for the future of animal health surveillance, including interpretation of disease patterns reported, system design and implementation, and engagement of data providers.

Institutional training programs for research personnel conducted by laboratory-animal veterinarians.

Science.gov (United States)

Dyson, Melissa C; Rush, Howard G

2012-01-01

Research institutions are required by federal law and national standards to ensure that individuals involved in animal research are appropriately trained in techniques and procedures used on animals. Meeting these requirements necessitates the support of institutional authorities; policies for the documentation and enforcement of training; resources to support and provide training programs; and high-quality, effective educational material. Because of their expertise, laboratory-animal veterinarians play an essential role in the design, implementation, and provision of educational programs for faculty, staff, and students in biomedical research. At large research institutions, provision of a training program for animal care and use personnel can be challenging because of the animal-research enterprise's size and scope. At the University of Michigan (UM), approximately 3,500 individuals have direct contact with animals used in research. We describe a comprehensive educational program for animal care and use personnel designed and provided by laboratory-animal veterinarians at UM and discuss the challenges associated with its implementation.

Animal Health Technicians: A Survey of Program Graduates and of Veterinarians.

Science.gov (United States)

Barsaleau, Richard B.; Walters, Henry R.

This document compiles the reports of two surveys conducted by Cosumnes River College to determine the status of graduates of its Animal Health Technician program, and to assess the acceptance and use of such paraprofessionals by area veterinarians. Information concerning type of employment, state certification, salaries, types of duties, length…

Management of the slowly emerging zoonosis, Hendra virus, by private veterinarians in Queensland, Australia: a qualitative study.

Science.gov (United States)

Mendez, Diana H; Kelly, Jenny; Buttner, Petra; Nowak, Madeleine; Speare, Rick

2014-09-17

Veterinary infection control for the management of Hendra virus (HeV), an emerging zoonosis in Australia, remained suboptimal until 2010 despite 71.4% (5/7) of humans infected with HeV being veterinary personnel or assisting a veterinarian, three of whom died before 2009. The aim of this study was to identify the perceived barriers to veterinary infection control and HeV management in private veterinary practice in Queensland, where the majority of HeV outbreaks have occurred in Australia. Most participants agreed that a number of key factors had contributed to the slow uptake of adequate infection control measures for the management of HeV amongst private veterinarians: a work culture characterised by suboptimal infection control standards and misconceptions about zoonotic risks; a lack of leadership and support from government authorities; the difficulties of managing biosecurity and public health issues from a private workforce perspective; and the slow pattern of emergence of HeV. By 2010, some infection control and HeV management changes had been implemented. Participants interviewed agreed that further improvements remained necessary; but also cautioned that this was a complex process which would require time. Private veterinarians and government authorities prior to 2009 were unprepared to handle new slowly emerging zoonoses, which may explain their mismanagement of HeV. Slowly emerging zoonoses may be of low public health significance but of high significance for specialised groups such as veterinarians. Private veterinarians, who are expected to fulfil an active biosecurity and public health role in the frontline management of such emerging zoonoses, need government agencies to better recognise their contribution, to consult with the veterinary profession when devising guidelines for the management of zoonoses and to provide them with greater leadership and support. We propose that specific infection control guidelines for the management of slowly emerging

An analysis of file system and installation of the file management system for NOS operating system

International Nuclear Information System (INIS)

Lee, Young Jai; Park, Sun Hee; Hwang, In Ah; Kim, Hee Kyung

1992-06-01

In this technical report, we analyze NOS file structure for Cyber 170-875 and Cyber 960-31 computer system. We also describe functions, procedure and how-to-operate and how-to-use of VDS. VDS is used to manage large files effectively for Cyber computer system. The purpose of the VDS installation is to increase the virtual disk storage by utilizing magnetic tape, to assist the users of the computer system in managing their files, and to enhance the performance of KAERI Cyber computer system. (Author)

The AAHA Computer Program. American Animal Hospital Association.

Science.gov (United States)

Albers, J W

1986-07-01

The American Animal Hospital Association Computer Program should benefit all small animal practitioners. Through the availability of well-researched and well-developed certified software, veterinarians will have increased confidence in their purchase decisions. With the expansion of computer applications to improve practice management efficiency, veterinary computer systems will further justify their initial expense. The development of the Association's veterinary computer network will provide a variety of important services to the profession.

Dimensional quality control of Ti-Ni dental file by optical coordinate metrology and computed tomography

DEFF Research Database (Denmark)

Yagüe-Fabra, J.A.; Tosello, Guido; Ontiveros, S.

2014-01-01

Endodontic dental files usually present complex 3D geometries, which make the complete measurement of the component very challenging with conventional micro metrology tools. Computed Tomography (CT) can represent a suitable alternative solution to micro metrology tools based on optical and tactile...... techniques. However, the establishment of CT systems traceability when measuring 3D complex geometries is still an open issue. In this work, to verify the quality of the CT dimensional measurements, the dental file has been measured both with a μCT system and an optical CMM (OCMM). The uncertainty...

PCF File Format.

Energy Technology Data Exchange (ETDEWEB)

Thoreson, Gregory G [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-08-01

PCF files are binary files designed to contain gamma spectra and neutron count rates from radiation sensors. It is the native format for the GAmma Detector Response and Analysis Software (GADRAS) package [1]. It can contain multiple spectra and information about each spectrum such as energy calibration. This document outlines the format of the file that would allow one to write a computer program to parse and write such files.

Hendra virus in Queensland, Australia, during the winter of 2011: veterinarians on the path to better management strategies.

Science.gov (United States)

Mendez, Diana; Buttner, Petra; Speare, Rick

2014-11-01

Following the emergence of Hendra virus (HeV), private veterinarians have had to adopt additional infection control strategies to manage this zoonosis. Between 1994 and 2010, seven people became infected with HeV, four fatally. All infected people were at a higher risk of exposure from contact with horses as they were either veterinary personnel, assisting veterinarians, or working in the horse industry. The management of emerging zoonoses is best approached from a One Health perspective as it benefits biosecurity as well as a public health, including the health of those most at risk, in this case private veterinarians. In 2011 we conducted a cross-sectional study of private veterinarians registered in Queensland and providing veterinary services to horses. The aim of this study was to gauge if participants had adopted recommendations for improved infection control, including the use of personal protective equipment (PPE), and the development of HeV specific management strategies during the winter of 2011. A majority of participants worked in practices that had a formal HeV management plan, mostly based on the perusal of official guidelines and an HeV field kit. The use of PPE increased as the health status of an equine patient decreased, demonstrating that many participants evaluated the risk of exposure to HeV appropriately; while others remained at risk of HeV infection by not using the appropriate PPE even when attending a sick horse. This study took place after Biosecurity Queensland had sent a comprehensive package about HeV management to all private veterinarians working in Queensland. However, those who had previous HeV experience through the management of suspected cases or had attended a HeV specific professional education programme in the previous 12 months were more likely to use PPE than those who had not. This may indicate that for private veterinarians in Queensland personal experience and face-to-face professional education sessions may be more

File Type Identification of File Fragments using Longest Common Subsequence (LCS)

Science.gov (United States)

Rahmat, R. F.; Nicholas, F.; Purnamawati, S.; Sitompul, O. S.

2017-01-01

Computer forensic analyst is a person in charge of investigation and evidence tracking. In certain cases, the file needed to be presented as digital evidence was deleted. It is difficult to reconstruct the file, because it often lost its header and cannot be identified while being restored. Therefore, a method is required for identifying the file type of file fragments. In this research, we propose Longest Common Subsequences that consists of three steps, namely training, testing and validation, to identify the file type from file fragments. From all testing results we can conlude that our proposed method works well and achieves 92.91% of accuracy to identify the file type of file fragment for three data types.

Comparison of canal transportation and centering ability of twisted files, Pathfile-ProTaper system, and stainless steel hand K-files by using computed tomography.

Science.gov (United States)

Gergi, Richard; Rjeily, Joe Abou; Sader, Joseph; Naaman, Alfred

2010-05-01

The purpose of this study was to compare canal transportation and centering ability of 2 rotary nickel-titanium (NiTi) systems (Twisted Files [TF] and Pathfile-ProTaper [PP]) with conventional stainless steel K-files. Ninety root canals with severe curvature and short radius were selected. Canals were divided randomly into 3 groups of 30 each. After preparation with TF, PP, and stainless steel files, the amount of transportation that occurred was assessed by using computed tomography. Three sections from apical, mid-root, and coronal levels of the canal were recorded. Amount of transportation and centering ability were assessed. The 3 groups were statistically compared with analysis of variance and Tukey honestly significant difference test. Less transportation and better centering ability occurred with TF rotary instruments (P < .0001). K-files showed the highest transportation followed by PP system. PP system showed significant transportation when compared with TF (P < .0001). The TF system was found to be the best for all variables measured in this study. Copyright (c) 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Action cameras and the Roter interaction analysis system to assess veterinarian-producer interactions in a dairy setting.

Science.gov (United States)

Ritter, Caroline; Barkema, Herman W; Adams, Cindy L

2018-02-24

Herd health and production management (HH&PM) are critical aspects of production animal veterinary practice; therefore, dairy veterinarians need to effectively deliver these services. However, limited research that can inform veterinary education has been conducted to characterise these farm visits. The aim of the present study was to assess the applicability of action cameras (eg, GoPro cameras) worn by veterinarians to provide on-farm recordings, and the suitability of these recordings for comprehensive communication analyses. Seven veterinarians each recorded three dairy HH&PM visits. Recordings were analysed using the Roter interaction analysis system (RIAS), which has been used to evaluate medical conversations in human and companion animal contexts, and provided insights regarding the importance of effective clinical communication. However, the RIAS has never been used in a production animal environment. Results of this pilot study indicate that on-farm recordings were suitable for RIAS coding. Dairy practitioners use a substantial amount of talk allocated to relationship-building and farmer education but that communication patterns of the same veterinarian vary considerably between farm visits. Consecutive studies using this method will provide observational data for research purposes and promise to aid in the improvement of veterinary education through identification of communication priorities and gaps in dairy advisory discussions. © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Longitudinal study of veterinarians from entry to the veterinary course to 10 years after graduation: attitudes to work, career and profession.

Science.gov (United States)

Heath, T J

2002-08-01

To describe the attitudes of veterinarians to their work, career and profession during the 10 years after graduation. Longitudinal study of students who started their course at The University of Queensland in 1985 and 1986, and who completed questionnaires in their first and fifth year as students, and after one, five and 10 years as veterinarians. Data from 129 (96%) questionnaires completed after 10 years as a veterinarian were coded numerically then analysed, together with data from previous questionnaires, with SAS System 7 for Windows 95. After 10 years, almost all respondents were either very glad they had done the veterinary course (57%) or generally glad, though with some misgivings (37%). Despite this, only 55% would definitely become a veterinarian if they 'had to do it over again'. The responses for about one-third were different from those given five years earlier. The views of many were related to the level of support and encouragement received in their first job after graduation. There were 42% who were working less than half-time as veterinarians, and their main reasons were, in order, raising children, long hours of work, attitudes of bosses and clients, and poor pay. A majority was concerned about the ethics and competence of some colleagues, and almost all believed that consideration of costs must influence the type of treatment animals receive. Most veterinarians were glad to have done the veterinary course, but for about one-quarter their career had not lived up to expectations and almost half would not do it again in another incarnation. Stress, hours of work, difficulties in balancing personal life with career and low income were important concerns for many. Low income may contribute to the low number of males entering the veterinary profession.

Computer Forensics Method in Analysis of Files Timestamps in Microsoft Windows Operating System and NTFS File System

Directory of Open Access Journals (Sweden)

Vesta Sergeevna Matveeva

2013-02-01

Full Text Available All existing file browsers displays 3 timestamps for every file in file system NTFS. Nowadays there are a lot of utilities that can manipulate temporal attributes to conceal the traces of file using. However every file in NTFS has 8 timestamps that are stored in file record and used in detecting the fact of attributes substitution. The authors suggest a method of revealing original timestamps after replacement and automated variant of it in case of a set of files.

Building Parts Inventory Files Using the AppleWorks Data Base Subprogram and Apple IIe or GS Computers.

Science.gov (United States)

Schlenker, Richard M.

This manual is a "how to" training device for building database files using the AppleWorks program with an Apple IIe or Apple IIGS Computer with Duodisk or two disk drives and an 80-column card. The manual provides step-by-step directions, and includes 25 figures depicting the computer screen at the various stages of the database file…

Ethical dilemmas encountered by small animal veterinarians: characterisation, responses, consequences and beliefs regarding euthanasia.

Science.gov (United States)

Kipperman, Barry; Morris, Patricia; Rollin, Bernard

2018-05-12

Small animal veterinarians' opinions were investigated regarding the frequency and nature of ethical dilemmas encountered, beliefs regarding euthanasia and balancing client and animal interests, prevalence and value of ethics training and proposals to mitigate the stressful effects of ethical dilemmas. The majority (52 per cent) of 484 respondents in the USA indicated via an online survey experiencing an ethical dilemma regarding the interests of clients and those of their patients at least weekly. Scenarios involving client financial concerns were commonly reported causes of ethical conflicts. While only 20 per cent of respondents indicated that other practitioners prioritise patient interests, 50 per cent of respondents characterised their own behaviour as prioritising patients. Most respondents (52 per cent) reported that ethical dilemmas are the leading cause, or are one of many equal causes, of work-related stress. Less experienced practitioners, general practitioners and associate veterinarians were more likely to encounter situations they defined as ethical dilemmas, and female respondents were more likely to find ethical dilemmas stressful. Most small animal veterinarians experience ethical dilemmas regularly, which contribute to moral stress. Results suggested that most small animal practitioners believe that greater awareness of moral stress and providing training in ethical theories and tools for coping with ethical dilemmas can ameliorate moral stress. © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

File management for experiment control parameters within a distributed function computer network

International Nuclear Information System (INIS)

Stubblefield, F.W.

1976-10-01

An attempt to design and implement a computer system for control of and data collection from a set of laboratory experiments reveals that many of the experiments in the set require an extensive collection of parameters for their control. The operation of the experiments can be greatly simplified if a means can be found for storing these parameters between experiments and automatically accessing them as they are required. A subsystem for managing files of such experiment control parameters is discussed. 3 figures

Vector-borne parasitic infections in dogs in the Baltic and Nordic countries: A questionnaire study to veterinarians on canine babesiosis and infections with Dirofilaria immitis and Dirofilaria repens.

Science.gov (United States)

Tiškina, Valentina; Jokelainen, Pikka

2017-09-15

Canine vector-borne diseases have been spreading northwards in Europe, and canine babesiosis and infections with Dirofilaria immitis (heartworm) and Dirofilaria repens have been diagnosed also in the Baltic and the Nordic countries. We used an online questionnaire to survey how large a proportion of veterinarians in the Baltic (Estonia, Latvia, and Lithuania) and the Nordic countries (Denmark, Finland, Iceland, Norway, and Sweden) saw canine babesiosis cases and dogs infected with D. immitis and D. repens in 2016. In addition, questions regarding transmission, zoonotic potential, clinical signs, and treatment of the infections were asked. The questionnaire was completed by 122 veterinarians. In 2016, 23% of them had seen at least one case of canine babesiosis, 15% at least one dog with D. immitis infection, and 9% at least one dog with D. repens infection. A veterinarian working in the Baltic countries had 12.2 times higher odds to have seen a canine babesiosis case and 9.3 times higher odds to have seen a dog with D. repens infection than a veterinarian working in the Nordic countries did. While 48% of the veterinarians knew that canine babesiosis is not considered a zoonosis, 26% knew that D. immitis is zoonotic and 34% knew that D. repens is zoonotic. The results suggested that autochthonous cases of the three vector-borne parasitic infections were seen by veterinarians in the Baltic countries, whereas most cases seen by veterinarians in the Nordic countries appeared to be imported. A substantial proportion of the veterinarians did not know whether the parasites are zoonotic. Copyright © 2017 Elsevier B.V. All rights reserved.

9 CFR 2.40 - Attending veterinarian and adequate veterinary care (dealers and exhibitors).

Science.gov (United States)

2010-01-01

... veterinary care (dealers and exhibitors). 2.40 Section 2.40 Animals and Animal Products ANIMAL AND PLANT... and Adequate Veterinary Care § 2.40 Attending veterinarian and adequate veterinary care (dealers and... veterinary care to its animals in compliance with this section. (1) Each dealer and exhibitor shall employ an...

Modification to the Monte N-Particle (MCNP) Visual Editor (MCNPVised) to read in Computer Aided Design (CAD) files

International Nuclear Information System (INIS)

Schwarz, Randy A.; Carter, Leeland L.

2004-01-01

Monte Carlo N-Particle Transport Code (MCNP) (Reference 1) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle (References 2 to 11) is recognized internationally as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant enhanced the capabilities of the MCNP Visual Editor to allow it to read in a 2D Computer Aided Design (CAD) file, allowing the user to modify and view the 2D CAD file and then electronically generate a valid MCNP input geometry with a user specified axial extent

Shaping ability of the conventional nickel-titanium and reciprocating nickel-titanium file systems: a comparative study using micro-computed tomography.

Science.gov (United States)

Hwang, Young-Hye; Bae, Kwang-Shik; Baek, Seung-Ho; Kum, Kee-Yeon; Lee, WooCheol; Shon, Won-Jun; Chang, Seok Woo

2014-08-01

This study used micro-computed tomographic imaging to compare the shaping ability of Mtwo (VDW, Munich, Germany), a conventional nickel-titanium file system, and Reciproc (VDW), a reciprocating file system morphologically similar to Mtwo. Root canal shaping was performed on the mesiobuccal and distobuccal canals of extracted maxillary molars. In the RR group (n = 15), Reciproc was used in a reciprocating motion (150° counterclockwise/30° clockwise, 300 rpm); in the MR group, Mtwo was used in a reciprocating motion (150° clockwise/30° counterclockwise, 300 rpm); and in the MC group, Mtwo was used in a continuous rotating motion (300 rpm). Micro-computed tomographic images taken before and after canal shaping were used to analyze canal volume change and the degree of transportation at the cervical, middle, and apical levels. The time required for canal shaping was recorded. Afterward, each file was analyzed using scanning electron microscopy. No statistically significant differences were found among the 3 groups in the time for canal shaping or canal volume change (P > .05). Transportation values of the RR and MR groups were not significantly different at any level. However, the transportation value of the MC group was significantly higher than both the RR and MR groups at the cervical and apical levels (P file deformation was observed for 1 file in group RR (1/15), 3 files in group MR (3/15), and 5 files in group MC (5/15). In terms of shaping ability, Mtwo used in a reciprocating motion was not significantly different from the Reciproc system. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Examining the dimensions and correlates of workplace stress among Australian veterinarians.

Science.gov (United States)

Smith, Derek R; Leggat, Peter A; Speare, Richard; Townley-Jones, Maureen

2009-12-08

Although stress is known to be a common occupational health issue in the veterinary profession, few studies have investigated its broad domains or the internal validity of the survey instrument used for assessment. We analysed data from over 500 veterinarians in Queensland, Australia, who were surveyed during 2006-07. The most common causes of stress were reported to be long hours worked per day, not having enough holidays per year, not having enough rest breaks per day, the attitude of customers, lack of recognition from the public and not having enough time per patient. Age, gender and practice type were statistically associated with various aspects of work-related stress. Strong correlations were found between having too many patients per day and not having enough time per patient; between not having enough holidays and long working hours; and also between not enough rest breaks per day and long working hours. Factor analysis revealed four dimensions of stress comprising a mixture of career, professional and practice-related items. The internal validity of our stress questionnaire was shown to be high during statistical analysis. Overall, this study suggests that workplace stress is fairly common among Australian veterinarians and represents an issue that occupies several distinct areas within their professional life.

Examining the dimensions and correlates of workplace stress among Australian veterinarians

Directory of Open Access Journals (Sweden)

Leggat Peter A

2009-12-01

Full Text Available Abstract Background Although stress is known to be a common occupational health issue in the veterinary profession, few studies have investigated its broad domains or the internal validity of the survey instrument used for assessment. Methods We analysed data from over 500 veterinarians in Queensland, Australia, who were surveyed during 2006-07. Results The most common causes of stress were reported to be long hours worked per day, not having enough holidays per year, not having enough rest breaks per day, the attitude of customers, lack of recognition from the public and not having enough time per patient. Age, gender and practice type were statistically associated with various aspects of work-related stress. Strong correlations were found between having too many patients per day and not having enough time per patient; between not having enough holidays and long working hours; and also between not enough rest breaks per day and long working hours. Factor analysis revealed four dimensions of stress comprising a mixture of career, professional and practice-related items. The internal validity of our stress questionnaire was shown to be high during statistical analysis. Conclusion Overall, this study suggests that workplace stress is fairly common among Australian veterinarians and represents an issue that occupies several distinct areas within their professional life.

Is the owner entitled to radiographs taken of his animal?

International Nuclear Information System (INIS)

Hartung, K.

1990-01-01

In the Federal Republic of Germany a veterinarian owns radiographs taken of animals in his practice. They have to be filed like any other results of diagnostic procedures. This is important, because evidence is required in the case of a law suit. On the other hand, it has to be stressed that taking radiographs is the subject of a free contract between owner and veterinarian. So it is possible to take the radiographs solely with the purpose of giving them to the owner, who may have them analysed by any other veterinarian of his choice. This is especially true in hip radiographs, which are evaluated and filed by an adjudicator of the breed association. In any case the radiologist has the obligation to lend the radiographs to another veterinarian on request for inspection. The second veterinarian has to give them back as soon as possible

The role of veterinarians in equestrian sport: a comparative review of ethical issues surrounding human and equine sports medicine.

Science.gov (United States)

Campbell, Madeleine L H

2013-09-01

Veterinarians have a key role in providing medical care for sports horses during and between competitions, but the standard client:veterinarian relationship that exists in companion and production animal medicine is distorted by the involvement of third parties in sports medicine, resulting in distinct ethical dilemmas which warrant focused academic attention. By comparing the existing literature on human sports medicine, this article reviews the ethical dilemmas which face veterinarians treating equine athletes, and the role of regulators in contributing to or resolving those dilemmas. Major ethical dilemmas occur both between and during competitions. These include conflicts of responsibility, conflicts between the need for client confidentiality and the need to share information in order to maximise animal welfare, and the need for an evidence base for treatment. Although many of the ethical problems faced in human and equine sports medicine are similar, the duty conferred upon a veterinarian by the licensing authority to ensure the welfare of animals committed to his or her care requires different obligations to those of a human sports medicine doctor. Suggested improvements to current practice which would help to address ethical dilemmas in equine sports medicine include an enhanced system for recording equine injuries, the use of professional Codes of Conduct and Codes of Ethics to establish acceptable responses to common ethical problems, and insistence that treatment of equine athletes is evidence-based (so far as possible) rather than economics-driven. Copyright © 2013 The Author. Published by Elsevier Ltd.. All rights reserved.

Fast probabilistic file fingerprinting for big data.

Science.gov (United States)

Tretyakov, Konstantin; Laur, Sven; Smant, Geert; Vilo, Jaak; Prins, Pjotr

2013-01-01

Biological data acquisition is raising new challenges, both in data analysis and handling. Not only is it proving hard to analyze the data at the rate it is generated today, but simply reading and transferring data files can be prohibitively slow due to their size. This primarily concerns logistics within and between data centers, but is also important for workstation users in the analysis phase. Common usage patterns, such as comparing and transferring files, are proving computationally expensive and are tying down shared resources. We present an efficient method for calculating file uniqueness for large scientific data files, that takes less computational effort than existing techniques. This method, called Probabilistic Fast File Fingerprinting (PFFF), exploits the variation present in biological data and computes file fingerprints by sampling randomly from the file instead of reading it in full. Consequently, it has a flat performance characteristic, correlated with data variation rather than file size. We demonstrate that probabilistic fingerprinting can be as reliable as existing hashing techniques, with provably negligible risk of collisions. We measure the performance of the algorithm on a number of data storage and access technologies, identifying its strengths as well as limitations. Probabilistic fingerprinting may significantly reduce the use of computational resources when comparing very large files. Utilisation of probabilistic fingerprinting techniques can increase the speed of common file-related workflows, both in the data center and for workbench analysis. The implementation of the algorithm is available as an open-source tool named pfff, as a command-line tool as well as a C library. The tool can be downloaded from http://biit.cs.ut.ee/pfff.

A secure file manager for UNIX

Energy Technology Data Exchange (ETDEWEB)

DeVries, R.G.

1990-12-31

The development of a secure file management system for a UNIX-based computer facility with supercomputers and workstations is described. Specifically, UNIX in its usual form does not address: (1) Operation which would satisfy rigorous security requirements. (2) Online space management in an environment where total data demands would be many times the actual online capacity. (3) Making the file management system part of a computer network in which users of any computer in the local network could retrieve data generated on any other computer in the network. The characteristics of UNIX can be exploited to develop a portable, secure file manager which would operate on computer systems ranging from workstations to supercomputers. Implementation considerations making unusual use of UNIX features, rather than requiring extensive internal system changes, are described, and implementation using the Cray Research Inc. UNICOS operating system is outlined.

Methods of fertility control in cats: Owner, breeder and veterinarian behavior and attitudes.

Science.gov (United States)

Murray, Jane K; Mosteller, Jill R; Loberg, Jenny M; Andersson, Maria; Benka, Valerie A W

2015-09-01

Fertility control is important for population management of owned and unowned cats, provides health benefits at the individual level and can reduce unwanted sexually dimorphic behaviors such as roaming, aggression, spraying and calling. This article reviews the available evidence regarding European and American veterinarian, owner and pedigree cat breeder attitudes toward both surgical sterilization and non-surgical fertility control. It additionally presents new data on veterinarians' and pedigree cat breeders' use of, and attitudes toward, alternative modalities of fertility control. Within the United States and Europe, the proportion of cats reported to be sterilized varies widely. Published estimates range from 27-93% for owned cats and 2-5% for cats trapped as part of a trap-neuter-return (TNR) program. In some regions and populations of cats, non-surgical fertility control is also used. Social context, cultural norms, individual preferences, economic considerations, legislation and professional organizations may all influence fertility control decisions for cats. Particularly in Europe, a limited number of non-surgical temporary contraceptives are available for cats; these include products with regulatory approval for cats as well as some used 'off label'. Non-surgical methods remove the risk of complications related to surgery and offer potential to treat more animals in less time and at lower cost; they may also appeal to pedigree cat breeders seeking temporary contraception. However, concerns over efficacy, delivery methods, target species safety, duration and side effects exist with current non-surgical options. Research is under way to develop new methods to control fertility in cats without surgery. US and European veterinarians place high value on three perceived benefits of surgical sterilization: permanence, behavioral benefits and health benefits. Non-surgical options will likely need to share these benefits to be widely accepted by the veterinary

Parallel file system with metadata distributed across partitioned key-value store c

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary; Torres, Aaron

2017-09-19

Improved techniques are provided for storing metadata associated with a plurality of sub-files associated with a single shared file in a parallel file system. The shared file is generated by a plurality of applications executing on a plurality of compute nodes. A compute node implements a Parallel Log Structured File System (PLFS) library to store at least one portion of the shared file generated by an application executing on the compute node and metadata for the at least one portion of the shared file on one or more object storage servers. The compute node is also configured to implement a partitioned data store for storing a partition of the metadata for the shared file, wherein the partitioned data store communicates with partitioned data stores on other compute nodes using a message passing interface. The partitioned data store can be implemented, for example, using Multidimensional Data Hashing Indexing Middleware (MDHIM).

Longitudinal study of Staphylococcus aureus colonization and infection in a cohort of swine veterinarians in the United States

Directory of Open Access Journals (Sweden)

Jisun Sun

2017-10-01

Full Text Available Abstract Background People working with pigs are at elevated risk of harboring methicillin resistant S. aureus (MRSA in their nose, which is attributable to occupational exposure to animals harboring livestock adapted S. aureus. To obtain insight into the biological nature of occupationally related nasal culture positivity, we conducted a longitudinal study of 66 swine veterinarians in the USA. Methods The study cohort resided in 15 US states and worked predominantly with swine. Monthly for 18 months, participants self-collected nasal swabs and completed a survey to report recent exposure to pigs and other animals; the occurrence of work related injuries; and any relevant health events such as skin and soft tissue infections or confirmed staphylococcal infections. Nasal swabs were cultured using selective methods to determine the presence of MRSA and methicillin susceptible S. aureus (MSSA, and isolates were characterized by spa typing and MLST. Results Prevalences of S. aureus (64%, monthly range from 58 to 82% and MRSA (9.5%; monthly range from 6 to15% were higher than reported for the US population (30% and 1.5% respectively. Predominant spa types were t034 (ST398, 37%, t002 (ST5, 17% and t337 (ST9/ST398 13%, a distribution similar to that found in a concurrent study in pigs in the USA. Veterinarians were classified into three groups: Persistent carriers (PC, 52%, Intermittent carriers (IC, 47% and Non-carriers (NC, 1%. Persistent carriage of a single spa type was observed in 14 (21% of participants, and paired (first and last isolates from PC subjects had minor genetic differences. Swabs from PC veterinarians carried higher numbers of S. aureus. Among IC veterinarians, culture positivity was significantly associated with recent contact with pigs. Conclusions Exposure to pigs did not lead to prolonged colonization in most subjects, and the higher numbers of S. aureus in PC subjects suggests that unknown host factors may determine the

Working raptors and veterinary medicine: preserving the client/veterinarian relationship.

Science.gov (United States)

O'Connor, Rebecca K

2012-09-01

Falconry has a long and rich history of ideas and techniques that have survived into modern times, making them time-tested but also antiquated on occasion. Working with a raptor in rehabilitation, educational, and, especially, falconry situations can be furthered with an understanding of raptor behavior and the mindset and specific needs of a raptor keeper. Through understanding birds of prey and the requirements of the individuals who keep them, veterinarians can both assist in better care for raptors and in preserving relationships with raptor-owning clients. Copyright © 2012 Elsevier Inc. All rights reserved.

Occupational zoonoses in zoo and wildlife veterinarians in India: A review

Directory of Open Access Journals (Sweden)

H. B. Chethan Kumar

2013-06-01

Full Text Available Zoos and biological parks are considered as a hub for public ecreation and education. This is highlighted by the fact that visitors to the zoos are increasing year by year and they generate sizeable revenue. Veterinary professionals play a pivotal role in health management of wild animals in zoos and biological parks. Since veterinarians work in close contact with wild animals, there is a potential risk of transmission of zoonotic diseases from wild animals to humans and vice versa. There are approximately 1415 infectious agents causing diseases in humans, out of which 868 (61% are known to be zoonotic in nature. It is also important to note that more than 70% of the emerging zoonotic diseases have wild animals as reservoir hosts. The major zoonotic diseases that are transmitted from wild animals to humans include rabies, anthrax, leptospirosis, Q-fever, psittacosis, hendra virus, nipah virus, herpes B encephalitis, toxoplasmosis, etc. Hence, it is imperative for veterinarians and zoo staff to be fully aware of the knowledge pertaining to the source, transmission, pathogenicity, treatment and control of zoonotic diseases. In this manuscript, we provide key information regarding zoonotic diseases and also recommend important measures for their control and prevention. The information provided here will be highly beneficial for personnel who work in close association with wild animals

Building a parallel file system simulator

International Nuclear Information System (INIS)

Molina-Estolano, E; Maltzahn, C; Brandt, S A; Bent, J

2009-01-01

Parallel file systems are gaining in popularity in high-end computing centers as well as commercial data centers. High-end computing systems are expected to scale exponentially and to pose new challenges to their storage scalability in terms of cost and power. To address these challenges scientists and file system designers will need a thorough understanding of the design space of parallel file systems. Yet there exist few systematic studies of parallel file system behavior at petabyte- and exabyte scale. An important reason is the significant cost of getting access to large-scale hardware to test parallel file systems. To contribute to this understanding we are building a parallel file system simulator that can simulate parallel file systems at very large scale. Our goal is to simulate petabyte-scale parallel file systems on a small cluster or even a single machine in reasonable time and fidelity. With this simulator, file system experts will be able to tune existing file systems for specific workloads, scientists and file system deployment engineers will be able to better communicate workload requirements, file system designers and researchers will be able to try out design alternatives and innovations at scale, and instructors will be able to study very large-scale parallel file system behavior in the class room. In this paper we describe our approach and provide preliminary results that are encouraging both in terms of fidelity and simulation scalability.

Mental and physical distress of field veterinarians during and soon after the 2010 foot and mouth disease outbreak in Miyazaki, Japan.

Science.gov (United States)

Makita, K; Tsuji, A; Iki, Y; Kurosawa, A; Kadowaki, H; Tsutsumi, A; Nogami, T; Watari, M

2015-12-01

An outbreak of foot and mouth disease occurred in Miyazaki, Japan, in April 2010, and nearly 290,000 animals were culled to control the disease. This study was conducted to demonstrate the causes and intensity of mental distress felt by the field veterinarians participating in the control programme. A focus group discussion was conducted with ten veterinarians to understand their distress during the outbreak, and a questionnaire to quantify the degree of distress experienced each week was administered to 16 veterinarians. A detailed questionnaire was separately administered to 70 veterinarians six months after the outbreak was controlled, to assess mental distress status and to identify the risk factors for serious mental illness (SMI) using the six-item Kessler scale (K6). Overall, mental distress (mean 3.1) was significantly greater than physical distress (mean 1.9, p mental distress were categorised into three groups: culling, communication with farmers, and gender; each category was qualitatively described. Only two respondents (2.9%) had high K6 scores suggesting SMI. In the final generalised linear models with quasi-Poisson errors, the riskfactorsfor SMI that remained were: disinfecting vehicles (p = 0.01), distress (p disease control. In conclusion, human resource management was adequate during the outbreak from a public-health perspective. However, monitoring delayed symptoms of post-traumatic stress disorder is recommended.

Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-file Systems.

Science.gov (United States)

Prabhakar, Attiguppe R; Yavagal, Chandrashekar; Dixit, Kratika; Naik, Saraswathi V

2016-01-01

Primary root canals are considered to be most challenging due to their complex anatomy. "Wave one" and "one shape" are single-file systems with reciprocating and rotary motion respectively. The aim of this study was to evaluate and compare dentin thickness, centering ability, canal transportation, and instrumentation time of wave one and one shape files in primary root canals using a cone beam computed tomographic (CBCT) analysis. This is an experimental, in vitro study comparing the two groups. A total of 24 extracted human primary teeth with minimum 7 mm root length were included in the study. Cone beam computed tomographic images were taken before and after the instrumentation for each group. Dentin thickness, centering ability, canal transportation, and instrumentation times were evaluated for each group. A significant difference was found in instrumentation time and canal transportation measures between the two groups. Wave one showed less canal transportation as compared with one shape, and the mean instrumentation time of wave one was significantly less than one shape. Reciprocating single-file systems was found to be faster with much less procedural errors and can hence be recommended for shaping the root canals of primary teeth. How to cite this article: Prabhakar AR, Yavagal C, Dixit K, Naik SV. Reciprocating vs Rotary Instrumentation in Pediatric Endodontics: Cone Beam Computed Tomographic Analysis of Deciduous Root Canals using Two Single-File Systems. Int J Clin Pediatr Dent 2016;9(1):45-49.

Challenges in Preparing Veterinarians for Global Animal Health: Understanding the Public Sector.

Science.gov (United States)

Hollier, Paul J; Quinn, Kaylee A; Brown, Corrie C

Understanding of global systems is essential for veterinarians seeking to work in realms outside of their national domain. In the global system, emphasis remains on the public sector, and the current curricular emphasis in developed countries is on private clinical practice for the domestic employment market. There is a resulting lack of competency at graduation for effective engagement internationally. The World Organisation for Animal Health (OIE) has created standards for public sector operations in animal health, which must be functional to allow for sustainable development. This public sector, known as the Veterinary Services, or VS, serves to control public good diseases, and once effectively built and fully operational, allows for the evolution of a functional private sector, focused on private good diseases. Until the VS is fully functional, support of private good services is non-sustainable and any efforts delivered are not long lasting. As new graduates opt for careers working in the international development sector, it is essential that they understand the OIE guidelines to help support continuing improvement. Developing global veterinarians by inserting content into the veterinary curriculum on how public systems can operate effectively could markedly increase the potential of our professional contributions globally, and particularly in the areas most in need.

A Study of Handling Cytotoxic Drugs and Risk of Birth Defects in Offspring of Female Veterinarians

Directory of Open Access Journals (Sweden)

Adeleh Shirangi

2014-06-01

Full Text Available We examined the association of occupational exposure to handling cytotoxic drugs at work with risk of birth defects among a cohort of female veterinarians. This study is a follow up survey of 321 female participants (633 pregnancies who participated in the Health Risks of Australian Veterinarian project. Data on pregnancies and exposure during each pregnancy was obtained by self-administered mailed questionnaire. Female veterinarians handling cytotoxic drugs during their pregnancy had a two-fold increased risk of birth defects in their offspring (RR = 2.08, 95% CI (1.05–4.15. Results were consistent in subgroup analysis of those who graduated during the period of 1961 to 1980 (RR = 5.04, 95% CI (1.81, 14.03 and in those working specifically in small and large animal practice. There was no increased risk in the subgroup that graduated after 1980. Women with unplanned pregnancies were more likely to handle cytotoxic drugs on a daily basis (RR = 1.86, 95% CI, 1.00–3.48 and had a higher increased risk of birth defects than those who planned their pregnancies in recent graduates and in those who worked specifically in small animal practice (RR = 2.53, 95% CI, 1.18–5.42. This study suggests that the adverse effects of handling cytotoxic drugs in pregnant women may include an increased risk of birth defects. Pregnancy intention status is an important health behavior and should be considered in prenatal programs.

Antimicrobial prescribing behaviour in dogs and cats by Belgian veterinarians.

Science.gov (United States)

Van Cleven, Alexia; Sarrazin, Steven; de Rooster, Hilde; Paepe, Dominique; Van der Meeren, Sofie; Dewulf, Jeroen

2018-03-17

The objective of this study is to survey general prescribing behaviour by Belgian companion animal veterinarians and to assess agreement of these practices with current treatment guidelines. Therefore an online survey was administered with five realistic and frequently occurring first-line cases to primary-care veterinary practitioners. For each case a predefined pattern of questions were asked about whether or not they would prescribe antimicrobials, if they would prescribe a non-antimicrobial treatment and if they would perform additional diagnostic steps. The responses were compared with recommendations in national guidelines and recent literature. The overall most prescribed antimicrobials were potentiated amoxicillin (43.0 per cent), fluoroquinolones (14.7 per cent), third-generation and fourth-generation cephalosporins (10.9 per cent) and tetracyclines (10.9 per cent). Only 48.3 per cent of the veterinarians complied with the guidelines in nearly all of the clinical scenarios (ie, prescribing antimicrobials when indicated, not prescribing antimicrobials when it is not indicated). Moreover, when prescribing highest priority critically important antimicrobials, susceptibility testing on bacterial cultures was performed in only 12.4 per cent of the prescriptions. The results showed that the prescribing behaviour of antimicrobial compounds by primary-care veterinary practitioners in dogs and cats is often not in agreement with national guidelines. Focus in improvement of this prescribing behaviour should be on performing the appropriate diagnostic steps and decreasing the use of highest priority critically important antimicrobials. © British Veterinary Association (unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The use of diagnostic x-ray among veterinarians. Results from a survey et guidance to regulations for veterinarian's use of diagnostic x-ray

International Nuclear Information System (INIS)

Solberg, M.

2010-12-01

The use of diagnostic X-ray equipment by veterinarians in Norway is regulated by the Radiation Protection Act (Stralevernloven) as well as the Regulation for Radiation Protection and Use of Radiation (Stralevernforskriften). A revised regulation was accepted by the Norwegian government 29/10/2010; revisions relevant to veterinarians will come to force 01/01/2011. Many X-ray machines are used in veterinary clinics in Norway, and the Norwegian Radiation Protection Authority (NRPA) has therefore undertaken a study to assess their use of X-ray equipment. The main objective has been to study occupational exposure to ionizing radiation. This report summarizes data collected during a web-based survey as well as data collected from 13 inspections at veterinary clinics, including in situ measurements of scattered radiation and measurements of compliance between light field and irradiation field at a selection of veterinary clinics. The report also includes guidance to regulations that are specific for the practice of radiology in veterinary medicine. The Norwegian organization for veterinarians (Den Norske Veterinarforening) is gratefully acknowledged for distributing the web-based survey among their members and thereby enabling a large number of responses to be collected. Of 441 completed surveys, 276 (63 %) confirmed that X-ray equipment was used in their clinic. The results from the survey and inspections generally show a good approach and satisfactory daily routines with regard to the use of X-ray machines, especially concerning occupational health aspects. However, nearly 50 % of the respondents were not familiar with the regulations. During the inspection round, certain regulatory requirements were found to be less than satisfactory in most clinics. Such requirements included reporting the use of X-ray machines to the NRPA and the proper use of radiation warning symbols in rooms where X-ray equipment was situated. About 50 % of the veterinary surgeons who used X -ray

Generation of Gaussian 09 Input Files for the Computation of 1H and 13C NMR Chemical Shifts of Structures from a Spartan’14 Conformational Search

OpenAIRE

sprotocols

2014-01-01

Authors: Spencer Reisbick & Patrick Willoughby ### Abstract This protocol describes an approach to preparing a series of Gaussian 09 computational input files for an ensemble of conformers generated in Spartan’14. The resulting input files are necessary for computing optimum geometries, relative conformer energies, and NMR shielding tensors using Gaussian. Using the conformational search feature within Spartan’14, an ensemble of conformational isomers was obtained. To convert the str...

Research of Performance Linux Kernel File Systems

Directory of Open Access Journals (Sweden)

Andrey Vladimirovich Ostroukh

2015-10-01

Full Text Available The article describes the most common Linux Kernel File Systems. The research was carried out on a personal computer, the characteristics of which are written in the article. The study was performed on a typical workstation running GNU/Linux with below characteristics. On a personal computer for measuring the file performance, has been installed the necessary software. Based on the results, conclusions and proposed recommendations for use of file systems. Identified and recommended by the best ways to store data.

Vector-Borne Diseases - constant challenge for practicing veterinarians: recommendations from the CVBD World Forum

Directory of Open Access Journals (Sweden)

Baneth Gad

2012-03-01

Full Text Available Abstract The human-animal bond has been a fundamental feature of mankind's history for millennia. The first, and strongest of these, man's relationship with the dog, is believed to pre-date even agriculture, going back as far as 30,000 years. It remains at least as powerful today. Fed by the changing nature of the interactions between people and their dogs worldwide and the increasing tendency towards close domesticity, the health of dogs has never played a more important role in family life. Thanks to developments in scientific understanding and diagnostic techniques, as well as changing priorities of pet owners, veterinarians are now able, and indeed expected, to play a fundamental role in the prevention and treatment of canine disease, including canine vector-borne diseases (CVBDs. The CVBDs represent a varied and complex group of diseases, including anaplasmosis, babesiosis, bartonellosis, borreliosis, dirofilariosis, ehrlichiosis, leishmaniosis, rickettsiosis and thelaziosis, with new syndromes being uncovered every year. Many of these diseases can cause serious, even life-threatening clinical conditions in dogs, with a number having zoonotic potential, affecting the human population. Today, CVBDs pose a growing global threat as they continue their spread far from their traditional geographical and temporal restraints as a result of changes in both climatic conditions and pet dog travel patterns, exposing new populations to previously unknown infectious agents and posing unprecedented challenges to veterinarians. In response to this growing threat, the CVBD World Forum, a multidisciplinary group of experts in CVBDs from around the world which meets on an annual basis, gathered in Nice (France in 2011 to share the latest research on CVBDs and discuss the best approaches to managing these diseases around the world. As a result of these discussions, we, the members of the CVBD Forum have developed the following recommendations to veterinarians

Factors influencing antibiotic prescribing habits and use of sensitivity testing amongst veterinarians in Europe.

Science.gov (United States)

De Briyne, N; Atkinson, J; Pokludová, L; Borriello, S P; Price, S

2013-11-16

The Heads of Medicines Agencies and the Federation of Veterinarians of Europe undertook a survey to gain a better insight into the decision-making process of veterinarians in Europe when deciding which antibiotics to prescribe. The survey was completed by 3004 practitioners from 25 European countries. Analysis was to the level of different types of practitioner (food producing (FP) animals, companion animals, equines) and country for Belgium, Czech Republic, France, Germany, Spain, Sweden and the UK. Responses indicate no single information source is universally considered critical, though training, published literature and experience were the most important. Factors recorded which most strongly influenced prescribing behaviour were sensitivity tests, own experience, the risk for antibiotic resistance developing and ease of administration. Most practitioners usually take into account responsible use warnings. Antibiotic sensitivity testing is usually performed where a treatment failure has occurred. Significant differences were observed in the frequency of sensitivity testing at the level of types of practitioners and country. The responses indicate a need to improve sensitivity tests and services, with the availability of rapid and cheaper testing being key factors.

Extracting the Data From the LCM vk4 Formatted Output File

Energy Technology Data Exchange (ETDEWEB)

Wendelberger, James G. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-29

These are slides about extracting the data from the LCM vk4 formatted output file. The following is covered: vk4 file produced by Keyence VK Software, custom analysis, no off the shelf way to read the file, reading the binary data in a vk4 file, various offsets in decimal lines, finding the height image data, directly in MATLAB, binary output beginning of height image data, color image information, color image binary data, color image decimal and binary data, MATLAB code to read vk4 file (choose a file, read the file, compute offsets, read optical image, laser optical image, read and compute laser intensity image, read height image, timing, display height image, display laser intensity image, display RGB laser optical images, display RGB optical images, display beginning data and save images to workspace, gamma correction subroutine), reading intensity form the vk4 file, linear in the low range, linear in the high range, gamma correction for vk4 files, computing the gamma intensity correction, observations.

Occupational factors and reproductive outcomes among a cohort of female veterinarians.

Science.gov (United States)

Wilkins, J R; Steele, L L

1998-07-01

To estimate absolute and relative risks of preterm delivery (PTD) and small-for-gestational-age (SGA) births among a cohort of female veterinarians in relation to selected occupational factors, including clinical practice type (CPT). Retrospective cohort survey. 2,997 female graduates from US veterinary colleges between 1970 and 1980. Relevant health and occupational data were collected through a self-administered mail questionnaire with telephone follow-up of nonrespondents. Absolute and relative risks of PTD and SGA births were estimated in relation to maternal CPT at the time of conception and exposure to 13 occupational factors. Attempts were made to control confounding by use of multiple logistic regression analyses. Absolute and relative risks of PTD were highest for veterinarians employed in exclusively equine clinical practice. Although several increased, none of the CPT-specific relative risk estimates were significantly different from the null value of 1. Exposure-specific analyses indicated that occupational involvement with solvents among exclusively small animal practitioners was associated with the highest relative risk of PTD. A small number of SGA births limited information that could be obtained from these analyses. Overall absolute risks of PTD and SGA births among cohort members were much lower in comparison with the general female population. Given the large number of women currently practicing and entering the profession of veterinary medicine, clinical tasks associated with potential reproductive hazards should be approached with heightened awareness and increased caution, especially activities that may involve exposure to solvents.

Design and application of remote file management system

International Nuclear Information System (INIS)

Zhu Haijun; Liu Dekang; Shen liren

2006-01-01

File transfer protocol can help users transfer files between computers on internet. FTP can not fulfill the needs of users in special occasions, so it needs programmer define file transfer protocol himself based on users. The method or realization and application for user-defined file transfer protocol is introduced. (authors)

Comparative evaluation of effect of rotary and reciprocating single-file systems on pericervical dentin: A cone-beam computed tomography study.

Science.gov (United States)

Zinge, Priyanka Ramdas; Patil, Jayaprakash

2017-01-01

The aim of this study is to evaluate and compare the effect of one shape, Neolix rotary single-file systems and WaveOne, Reciproc reciprocating single-file systems on pericervical dentin (PCD) using cone-beam computed tomography (CBCT). A total of 40 freshly extracted mandibular premolars were collected and divided into two groups, namely, Group A - Rotary: A 1 - Neolix and A 2 - OneShape and Group B - Reciprocating: B 1 - WaveOne and B 2 - Reciproc. Preoperative scans of each were taken followed by conventional access cavity preparation and working length determination with 10-k file. Instrumentation of the canal was done according to the respective file system, and postinstrumentation CBCT scans of teeth were obtained. 90 μm thick slices were obtained 4 mm apical and coronal to the cementoenamel junction. The PCD thickness was calculated as the shortest distance from the canal outline to the closest adjacent root surface, which was measured in four surfaces, i.e., facial, lingual, mesial, and distal for all the groups in the two obtained scans. There was no significant difference found between rotary single-file systems and reciprocating single-file systems in their effect on PCD, but in Group B 2 , there was most significant loss of tooth structure in the mesial, lingual, and distal surface ( P file system removes more PCD as compared to other experimental groups, whereas Neolix single file system had the least effect on PCD.

A Centralized Control and Dynamic Dispatch Architecture for File Integrity Analysis

Directory of Open Access Journals (Sweden)

Ronald DeMara

2006-02-01

Full Text Available The ability to monitor computer file systems for unauthorized changes is a powerful administrative tool. Ideally this task could be performed remotely under the direction of the administrator to allow on-demand checking, and use of tailorable reporting and exception policies targeted to adjustable groups of network elements. This paper introduces M-FICA, a Mobile File Integrity and Consistency Analyzer as a prototype to achieve this capability using mobile agents. The M-FICA file tampering detection approach uses MD5 message digests to identify file changes. Two agent types, Initiator and Examiner, are used to perform file integrity tasks. An Initiator travels to client systems, computes a file digest, then stores those digests in a database file located on write-once media. An Examiner agent computes a new digest to compare with the original digests in the database file. Changes in digest values indicate that the file contents have been modified. The design and evaluation results for a prototype developed in the Concordia agent framework are described.

Exposure levels of farmers and veterinarians to particulate matter and gases uring operational tasks in pig-fattening houses

Directory of Open Access Journals (Sweden)

Nele Van Ransbeeck

2014-09-01

Full Text Available The main objective of the study was to assess particulate matter (PM exposure levels for both the farmer and the veterinarian during different operational tasks in pig-fattening houses, and to estimate their exposure levels on a daily working basis (time-weighted average (TWA. The measured PM fractions were: inhalable and respirable PM, PM10, PM2.5 and PM1. The effects of pig age, pen floor type (conventional or low emission surface and cleaning of the pens on the personal PM exposure were also investigated. Indoor concentrations of NH[sub]3[/sub], CH[sub]4[/sub], and CO[sub]2[/sub] were additionally measured during some operational tasks. The results showed that personal exposure levels can become extremely high during some operational tasks performed by the farmer or veterinarian. The highest concentration levels were observed during feed shovelling and blood sampling, the lowest during the weighing of the pigs. For the farmer, the estimated TWA exposure levels of inhalable and respirable PM were 6.0 and 0.29 mg m[sup] -3[/sup] , respectively. These exposure levels for the veterinarian were, respectively, 10.6 and 0.74 mg m[sup] -3[/sup] . The PM concentration levels were mainly determined by the performed operational tasks. There was no significant effect of pig age, pen floor type, nor cleaning of the pens on the personal exposure levels.

CINDA 83 (1977-1983). The index to literature and computer files on microscopic neutron data

International Nuclear Information System (INIS)

1983-01-01

CINDA, the Computer Index of Neutron Data, contains bibliographical references to measurements, calculations, reviews and evaluations of neutron cross-sections and other microscopic neutron data; it includes also index references to computer libraries of numerical neutron data exchanged between four regional neutron data centres. The present issue, CINDA 83, is an index to the literature on neutron data published after 1976. The basic volume, CINDA-A, together with the present issue, contains the full CINDA file as of 1 April 1983. A supplement to CINDA 83 is foreseen for fall 1983. Next year's issue, which is envisaged to be published in June 1984, will again cover all relevant literature that has appeared after 1976

Workplace bullying and relationships with health and performance among a sample of New Zealand veterinarians.

Science.gov (United States)

Gardner, D H; Rasmussen, W

2018-03-01

To examine the relationships between workplace bullying, destructive leadership and team conflict, and physical health, strain, self-reported performance and intentions to quit among veterinarians in New Zealand, and how these relationships could be moderated by psychological capital and perceived organisational support. Data were collected by means of an online survey, distributed to members of the New Zealand Veterinary Association. Participation was voluntary and all responses were anonymous and confidential. Scores for the variables measured were based on responses to questions or statements with responses categorised on a linear scale. A series of regression analyses were used to assess mediation or moderation by intermediate variables on the relationships between predictor variables and dependent variables. Completed surveys were provided by 197 veterinarians, of which 32 (16.2%) had been bullied at work, i.e. they had experienced two or more negative acts at least weekly over the previous 6 months, and nine (4.6%) had experienced cyber-bullying. Mean scores for workplace bullying were higher for female than male respondents, and for non-managers than managers (pbullying were positively associated with scores for destructive leadership and team conflict, physical health, strain, and intentions to quit (pbullying and team conflict mediated the relationship between destructive leadership and strain, physical health and intentions to quit. Perceived organisational support moderated the effects of workplace bullying on strain and self-reported job performance (pbullied. The negative effects of destructive leadership on strain, physical health and intentions to quit were mediated by team conflict and workplace bullying. It should be noted that the findings of this study were based on a survey of self-selected participants and the findings may not represent the wider population of New Zealand veterinarians.

Modification to the Monte Carlo N-Particle (MCNP) Visual Editor (MCNPVised) to Read in Computer Aided Design (CAD) Files

International Nuclear Information System (INIS)

Randolph Schwarz; Leland L. Carter; Alysia Schwarz

2005-01-01

Monte Carlo N-Particle Transport Code (MCNP) is the code of choice for doing complex neutron/photon/electron transport calculations for the nuclear industry and research institutions. The Visual Editor for Monte Carlo N-Particle is internationally recognized as the best code for visually creating and graphically displaying input files for MCNP. The work performed in this grant was used to enhance the capabilities of the MCNP Visual Editor to allow it to read in both 2D and 3D Computer Aided Design (CAD) files, allowing the user to electronically generate a valid MCNP input geometry

Dynamic Non-Hierarchical File Systems for Exascale Storage

Energy Technology Data Exchange (ETDEWEB)

Long, Darrell E. [Univ. of California, Santa Cruz, CA (United States); Miller, Ethan L [Univ. of California, Santa Cruz, CA (United States)

2015-02-24

This constitutes the final report for “Dynamic Non-Hierarchical File Systems for Exascale Storage”. The ultimate goal of this project was to improve data management in scientific computing and high-end computing (HEC) applications, and to achieve this goal we proposed: to develop the first, HEC-targeted, file system featuring rich metadata and provenance collection, extreme scalability, and future storage hardware integration as core design goals, and to evaluate and develop a flexible non-hierarchical file system interface suitable for providing more powerful and intuitive data management interfaces to HEC and scientific computing users. Data management is swiftly becoming a serious problem in the scientific community – while copious amounts of data are good for obtaining results, finding the right data is often daunting and sometimes impossible. Scientists participating in a Department of Energy workshop noted that most of their time was spent “...finding, processing, organizing, and moving data and it’s going to get much worse”. Scientists should not be forced to become data mining experts in order to retrieve the data they want, nor should they be expected to remember the naming convention they used several years ago for a set of experiments they now wish to revisit. Ideally, locating the data you need would be as easy as browsing the web. Unfortunately, existing data management approaches are usually based on hierarchical naming, a 40 year-old technology designed to manage thousands of files, not exabytes of data. Today’s systems do not take advantage of the rich array of metadata that current high-end computing (HEC) file systems can gather, including content-based metadata and provenance1 information. As a result, current metadata search approaches are typically ad hoc and often work by providing a parallel management system to the “main” file system, as is done in Linux (the locate utility), personal computers, and enterprise search

Portable File Format (PFF) specifications

Energy Technology Data Exchange (ETDEWEB)

Dolan, Daniel H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-02-01

Created at Sandia National Laboratories, the Portable File Format (PFF) allows binary data transfer across computer platforms. Although this capability is supported by many other formats, PFF files are still in use at Sandia, particularly in pulsed power research. This report provides detailed PFF specifications for accessing data without relying on legacy code.

F2AC: A Lightweight, Fine-Grained, and Flexible Access Control Scheme for File Storage in Mobile Cloud Computing

Directory of Open Access Journals (Sweden)

Wei Ren

2016-01-01

Full Text Available Current file storage service models for cloud servers assume that users either belong to single layer with different privileges or cannot authorize privileges iteratively. Thus, the access control is not fine-grained and flexible. Besides, most access control methods at cloud servers mainly rely on computationally intensive cryptographic algorithms and, especially, may not be able to support highly dynamic ad hoc groups with addition and removal of group members. In this paper, we propose a scheme called F2AC, which is a lightweight, fine-grained, and flexible access control scheme for file storage in mobile cloud computing. F2AC can not only achieve iterative authorization, authentication with tailored policies, and access control for dynamically changing accessing groups, but also provide access privilege transition and revocation. A new access control model called directed tree with linked leaf model is proposed for further implementations in data structures and algorithms. The extensive analysis is given for justifying the soundness and completeness of F2AC.

Quantifying Preferences of Farmers and Veterinarians for National Animal Health Programs: The Example of Bovine Mastitis and Antimicrobial Usage in Switzerland

Science.gov (United States)

van den Borne, Bart H. P.; van Soest, Felix J. S.; Reist, Martin; Hogeveen, Henk

2017-01-01

Bovine udder health in Switzerland is of a relatively high level. However, antimicrobial usage (AMU) seems high in comparison to other European countries also. A new udder health and AMU improvement program could improve this situation but it is uncertain whether there is support from the field. This study aimed to quantify preferences of dairy farmers and veterinarians for the start and design characteristics of a new national udder health and AMU improvement program in Switzerland. A total of 478 dairy farmers and 98 veterinarians completed an online questionnaire. Questions on their demographics and their mindset toward AMU were complemented with an adaptive choice-based conjoint interview, a novel conjoint analysis technique to quantify preferences of respondents for characteristics of a product for which multiple trade-off decisions must be made (here a bovine udder health and AMU improvement program). The conjoint analysis was followed by a multivariate multiple regression analysis to identify groups of respondents with different program design preferences. Logistic regression models were used to associate covariates with respondents’ preference to start a new udder health and AMU improvement program. Most farmers (55%) and veterinarians (62%) were in favor of starting a new voluntary udder health and AMU improvement program, but the program design preferences agreed moderately between the two stakeholder groups. Farmers preferred an udder health and AMU improvement program that did not contain a penalty system for high AMU, was voluntary for all dairy herds, and aimed to simultaneously improve udder health and reduce AMU. Veterinarians preferred a program that had the veterinary organization and the government taking the lead in program design decision making, did not contain a penalty system for high AMU, and aimed to simultaneously improve udder health and reduce AMU. Differences between groups of farmers and veterinarians concerning their start

Computational system to create an entry file for replicating I-125 seeds simulating brachytherapy case studies using the MCNPX code

Directory of Open Access Journals (Sweden)

Leonardo da Silva Boia

2014-03-01

Full Text Available Purpose: A computational system was developed for this paper in the C++ programming language, to create a 125I radioactive seed entry file, based on the positioning of a virtual grid (template in voxel geometries, with the purpose of performing prostate cancer treatment simulations using the MCNPX code.Methods: The system is fed with information from the planning system with regard to each seed’s location and its depth, and an entry file is automatically created with all the cards (instructions for each seed regarding their cell blocks and surfaces spread out spatially in the 3D environment. The system provides with precision a reproduction of the clinical scenario for the MCNPX code’s simulation environment, thereby allowing the technique’s in-depth study.Results and Conclusion: The preliminary results from this study showed that the lateral penumbra of uniform scanning proton beams was less sensitive In order to validate the computational system, an entry file was created with 88 125I seeds that were inserted in the phantom’s MAX06 prostate region with initial activity determined for the seeds at the 0.27 mCi value. Isodose curves were obtained in all the prostate slices in 5 mm steps in the 7 to 10 cm interval, totaling 7 slices. Variance reduction techniques were applied in order to optimize computational time and the reduction of uncertainties such as photon and electron energy interruptions in 4 keV and forced collisions regarding cells of interest. Through the acquisition of isodose curves, the results obtained show that hot spots have values above 300 Gy, as anticipated in literature, stressing the importance of the sources’ correct positioning, in which the computational system developed provides, in order not to release excessive doses in adjacent risk organs. The 144 Gy prescription curve showed in the validation process that it covers perfectly a large percentage of the volume, at the same time that it demonstrates a large

Adding Data Management Services to Parallel File Systems

Energy Technology Data Exchange (ETDEWEB)

Brandt, Scott [Univ. of California, Santa Cruz, CA (United States)

2015-03-04

The objective of this project, called DAMASC for “Data Management in Scientific Computing”, is to coalesce data management with parallel file system management to present a declarative interface to scientists for managing, querying, and analyzing extremely large data sets efficiently and predictably. Managing extremely large data sets is a key challenge of exascale computing. The overhead, energy, and cost of moving massive volumes of data demand designs where computation is close to storage. In current architectures, compute/analysis clusters access data in a physically separate parallel file system and largely leave it scientist to reduce data movement. Over the past decades the high-end computing community has adopted middleware with multiple layers of abstractions and specialized file formats such as NetCDF-4 and HDF5. These abstractions provide a limited set of high-level data processing functions, but have inherent functionality and performance limitations: middleware that provides access to the highly structured contents of scientific data files stored in the (unstructured) file systems can only optimize to the extent that file system interfaces permit; the highly structured formats of these files often impedes native file system performance optimizations. We are developing Damasc, an enhanced high-performance file system with native rich data management services. Damasc will enable efficient queries and updates over files stored in their native byte-stream format while retaining the inherent performance of file system data storage via declarative queries and updates over views of underlying files. Damasc has four key benefits for the development of data-intensive scientific code: (1) applications can use important data-management services, such as declarative queries, views, and provenance tracking, that are currently available only within database systems; (2) the use of these services becomes easier, as they are provided within a familiar file

Schools (Students) Exchanging CAD/CAM Files over the Internet.

Science.gov (United States)

Mahoney, Gary S.; Smallwood, James E.

This document discusses how students and schools can benefit from exchanging computer-aided design/computer-aided manufacturing (CAD/CAM) files over the Internet, explains how files are exchanged, and examines the problem of selected hardware/software incompatibility. Key terms associated with information search services are defined, and several…

Best broiler husbandry system and perceived importance of production aspects by Dutch citizens, poultry farmers and veterinarians

NARCIS (Netherlands)

Asselt, van M.; Ekkel, E.D.; Kemp, B.; Stassen, E.N.

2015-01-01

The objectives of this study were to explore the views of Dutch citizens, poultry farmers and poultry veterinarians regarding: (1) best broiler husbandry systems; (2) the importance of production aspects of broiler production and (3) the relation between best husbandry system and the importance of

Computerized index for teaching files

International Nuclear Information System (INIS)

Bramble, J.M.

1989-01-01

A computerized index can be used to retrieve cases from a teaching file that have radiographic findings similar to an unknown case. The probability that a user will review cases with a correct diagnosis was estimated with use of radiographic findings of arthritis in hand radiographs of 110 cases from a teaching file. The nearest-neighbor classification algorithm was used as a computer index to 110 cases of arthritis. Each case was treated as an unknown and inputted to the computer index. The accuracy of the computer index in retrieving cases with the same diagnosis (including rheumatoid arthritis, gout, psoriatic arthritis, inflammatory osteoarthritis, and pyrophosphate arthropathy) was measured. A Bayes classifier algorithm was also tested on the same database. Results are presented. The nearest-neighbor algorithm was 83%. By comparison, the estimated accuracy of the Bayes classifier algorithm was 78%. Conclusions: A computerized index to a teaching file based on the nearest-neighbor algorithm should allow the user to review cases with the correct diagnosis of an unknown case, by entering the findings of the unknown case

Securing the AliEn File Catalogue - Enforcing authorization with accountable file operations

International Nuclear Information System (INIS)

Schreiner, Steffen; Banerjee, Subho Sankar; Betev, Latchezar; Carminati, Federico; Vladimirovna Datskova, Olga; Furano, Fabrizio; Grigoras, Alina; Grigoras, Costin; Mendez Lorenzo, Patricia; Peters, Andreas Joachim; Saiz, Pablo; Bagnasco, Stefano; Zhu Jianlin

2011-01-01

The AliEn Grid Services, as operated by the ALICE Collaboration in its global physics analysis grid framework, is based on a central File Catalogue together with a distributed set of storage systems and the possibility to register links to external data resources. This paper describes several identified vulnerabilities in the AliEn File Catalogue access protocol regarding fraud and unauthorized file alteration and presents a more secure and revised design: a new mechanism, called LFN Booking Table, is introduced in order to keep track of access authorization in the transient state of files entering or leaving the File Catalogue. Due to a simplification of the original Access Envelope mechanism for xrootd-protocol-based storage systems, fundamental computational improvements of the mechanism were achieved as well as an up to 50% reduction of the credential's size. By extending the access protocol with signed status messages from the underlying storage system, the File Catalogue receives trusted information about a file's size and checksum and the protocol is no longer dependent on client trust. Altogether, the revised design complies with atomic and consistent transactions and allows for accountable, authentic, and traceable file operations. This paper describes these changes as part and beyond the development of AliEn version 2.19.

Zebra: A striped network file system

Science.gov (United States)

Hartman, John H.; Ousterhout, John K.

1992-01-01

The design of Zebra, a striped network file system, is presented. Zebra applies ideas from log-structured file system (LFS) and RAID research to network file systems, resulting in a network file system that has scalable performance, uses its servers efficiently even when its applications are using small files, and provides high availability. Zebra stripes file data across multiple servers, so that the file transfer rate is not limited by the performance of a single server. High availability is achieved by maintaining parity information for the file system. If a server fails its contents can be reconstructed using the contents of the remaining servers and the parity information. Zebra differs from existing striped file systems in the way it stripes file data: Zebra does not stripe on a per-file basis; instead it stripes the stream of bytes written by each client. Clients write to the servers in units called stripe fragments, which are analogous to segments in an LFS. Stripe fragments contain file blocks that were written recently, without regard to which file they belong. This method of striping has numerous advantages over per-file striping, including increased server efficiency, efficient parity computation, and elimination of parity update.

Cone-beam Computed Tomographic Assessment of Canal Centering Ability and Transportation after Preparation with Twisted File and Bio RaCe Instrumentation.

Directory of Open Access Journals (Sweden)

Kiamars Honardar

2014-08-01

Full Text Available Use of rotary Nickel-Titanium (NiTi instruments for endodontic preparation has introduced a new era in endodontic practice, but this issue has undergone dramatic modifications in order to achieve improved shaping abilities. Cone-beam computed tomography (CBCT has made it possible to accurately evaluate geometrical changes following canal preparation. This study was carried out to compare canal centering ability and transportation of Twisted File and BioRaCe rotary systems by means of cone-beam computed tomography.Thirty root canals from freshly extracted mandibular and maxillary teeth were selected. Teeth were mounted and scanned before and after preparation by CBCT at different apical levels. Specimens were divided into 2 groups of 15. In the first group Twisted File and in the second, BioRaCe was used for canal preparation. Canal transportation and centering ability after preparation were assessed by NNT Viewer and Photoshop CS4 software. Statistical analysis was performed using t-test and two-way ANOVA.All samples showed deviations from the original axes of the canals. No significant differences were detected between the two rotary NiTi instruments for canal centering ability in all sections. Regarding canal transportation however, a significant difference was seen in the BioRaCe group at 7.5mm from the apex.Under the conditions of this in vitro study, Twisted File and BioRaCe rotary NiTi files retained original canal geometry.

Prevalence and Risk Factors Associated with Musculoskeletal Discomfort in Spay and Neuter Veterinarians

Directory of Open Access Journals (Sweden)

Sara C. White

2013-02-01

Full Text Available A cross-sectional study to investigate musculoskeletal discomfort (MSD surveyed 219 veterinarians who currently or previously perform spays and neuters at least 4 hours per week. Participants were asked about the presence and severity of hand and body MSD during the previous month, whether MSD interfered with work or daily activities, whether they attributed their MSD to their spay/neuter work, and whether MSD had ever necessitated absence from work. The period prevalence of MSD was 99.1%, with 76.7% experiencing hand or wrist pain and 98.2% experiencing body pain. Hand discomfort was most commonly reported in the right thumb and/or thumb base (49.8% and the right wrist (37.9%. Body discomfort was most commonly reported in the lower back (76.7%, shoulders (72.6%, and neck (71.7%. Increasing career length, increasing weekly hours in surgery and decreasing job satisfaction were the work-related factors with the greatest relative contribution accounting for variation in hand pain severity and total pain. Although 94.4% of respondents felt that posture during surgery is important, only 30.6% had received any instruction in posture and positioning for surgery. Future interventions should aim to optimize surgical efficiency, surgeon work schedules, and working environment. Analysis and intervention studies are required to determine further causes of MSD in these veterinarians and develop interventions to prevent MSD.

Prevalence and Risk Factors Associated with Musculoskeletal Discomfort in Spay and Neuter Veterinarians.

Science.gov (United States)

White, Sara C

2013-02-04

A cross-sectional study to investigate musculoskeletal discomfort (MSD) surveyed 219 veterinarians who currently or previously perform spays and neuters at least 4 hours per week. Participants were asked about the presence and severity of hand and body MSD during the previous month, whether MSD interfered with work or daily activities, whether they attributed their MSD to their spay/neuter work, and whether MSD had ever necessitated absence from work. The period prevalence of MSD was 99.1%, with 76.7% experiencing hand or wrist pain and 98.2% experiencing body pain. Hand discomfort was most commonly reported in the right thumb and/or thumb base (49.8%) and the right wrist (37.9%). Body discomfort was most commonly reported in the lower back (76.7%), shoulders (72.6%), and neck (71.7%). Increasing career length, increasing weekly hours in surgery and decreasing job satisfaction were the work-related factors with the greatest relative contribution accounting for variation in hand pain severity and total pain. Although 94.4% of respondents felt that posture during surgery is important, only 30.6% had received any instruction in posture and positioning for surgery. Future interventions should aim to optimize surgical efficiency, surgeon work schedules, and working environment. Analysis and intervention studies are required to determine further causes of MSD in these veterinarians and develop interventions to prevent MSD.

Survey of the UK veterinary profession 2: sources of information used by veterinarians

Science.gov (United States)

Nielsen, T. D.; Dean, R. S.; Massey, A.; Brennan, M. L.

2015-01-01

Access to the most up-to-date evidence is an important cornerstone for veterinarians attempting to practice in an evidence-based manner; therefore, an understanding of what and how information is accessed is vital. The aim of this study was to identify what resources the UK veterinary profession access and regard as most useful. Based on questionnaires received from veterinarians, the Veterinary Times was nominated as most often read journal or magazine by respondents (n=3572, 79 per cent). In Practice (n=3224, 82 per cent) and the Veterinary Record (n=165, 34 per cent) were seen as most useful by clinicians, and non-clinicians, respectively. Google was the most often nominated electronic resource by all respondents (n=3076, 71 per cent), with Google (n=459, 23 per cent) and PubMed (n=60, 17 per cent) seen as most useful by clinicians and non-clinicians, respectively. The abstract and conclusion sections were the most read parts of scientific manuscripts nominated by all respondents. When looking for assistance with difficult cases, colleagues were the common information choice for clinicians. Different sections of the veterinary profession access information, and deem resources useful, in different ways. Access to good quality evidence is important for the practice of evidence-based veterinary medicine, and therefore, researchers should think about disseminating their findings in a targeted way for optimal use by the profession. PMID:26246397

Evaluation of clinical data in childhood asthma. Application of a computer file system

International Nuclear Information System (INIS)

Fife, D.; Twarog, F.J.; Geha, R.S.

1983-01-01

A computer file system was used in our pediatric allergy clinic to assess the value of chest roentgenograms and hemoglobin determinations used in the examination of patients and to correlate exposure to pets and forced hot air with the severity of asthma. Among 889 children with asthma, 20.7% had abnormal chest roentgenographic findings, excluding hyperinflation and peribronchial thickening, and 0.7% had abnormal hemoglobin values. Environmental exposure to pets or forced hot air was not associated with increased severity of asthma, as assessed by five measures of outcome: number of medications administered, requirement for corticosteroids, frequency of clinic visits, frequency of emergency room visits, and frequency of hospitalizations

Psychosocial stress, demoralization and the consumption of tobacco, alcohol and medical drugs by veterinarians

OpenAIRE

Harling, Melanie; Strehmel, Petra; Schablon, Anja; Nienhaus, Albert

2009-01-01

Abstract Background In this cross-sectional study the association between psychosocial stress, demoralization and the consumption of psychotropic substances in veterinarians was examined using data from a sample of 1,060 subjects (52.7% response). Methods Multiple logistic regression models were used to determine risk factors for psychosocial stress, demoralization, tobacco consumption (≹ 10 items/day), high-risk alcohol consumption (men > 20 g pure alcohol/day, women > 10 g pure alcohol/day)...

ERX: a software for editing files containing X-ray spectra to be used in exposure computational models

International Nuclear Information System (INIS)

Cabral, Manuela O.M.; Vieira, Jose W.; Silva, Alysson G.; Leal Neto, Viriato; Oliveira, Alex C.H.; Lima, Fernando R.A.

2011-01-01

Exposure Computational Models (ECMs) are utilities that simulate situations in which occurs irradiation in a given environment. An ECM is composed primarily by an anthropomorphic model (phantom), and a Monte Carlo code (MC). This paper presents a tutorial of the software Espectro de Raios-X (ERX). This software performs reading and numerical and graphical analysis of text files containing diagnostic X-ray spectra for use in algorithms of radioactive sources in the ECMs of a Grupo de Dosimetria Numerica. The ERX allows the user to select one among several X-ray spectrums in the energy range Diagnostic radiology X-Ray most commonly used in radiology clinics. In the current version of the ERX there are two types of input files: the contained in mspectra.dat file and the resulting of MC simulations in Geant4. The software allows the construction of charts of the Probability Density Function (PDF) and Cumulative Distribution Function (CDF) of a selected spectrum as well as the table with the values of these functions and the spectrum. In addition, the ERX allows the user to make comparative analysis between the PDF graphics of the two catalogs of spectra available, besides being can perform dosimetric evaluations with the selected spectrum. A software of this kind is an important computational tool for researchers in numerical dosimetry because of the diversity of Diagnostic radiology X-Ray machines, which implies in a mass of input data highly diverse. And because of this, the ERX provides independence to the group related to the data origin that is contained in the catalogs created, not being necessary to resort to others. (author)

Geothermal-energy files in computer storage: sites, cities, and industries

Energy Technology Data Exchange (ETDEWEB)

O' Dea, P.L.

1981-12-01

The site, city, and industrial files are described. The data presented are from the hydrothermal site file containing about three thousand records which describe some of the principal physical features of hydrothermal resources in the United States. Data elements include: latitude, longitude, township, range, section, surface temperature, subsurface temperature, the field potential, and well depth for commercialization. (MHR)

MR-AFS: a global hierarchical file-system

International Nuclear Information System (INIS)

Reuter, H.

2000-01-01

The next generation of fusion experiments will use object-oriented technology creating the need for world wide sharing of an underlying hierarchical file-system. The Andrew file system (AFS) is a well known and widely spread global distributed file-system. Multiple-resident-AFS (MR-AFS) combines the features of AFS with hierarchical storage management systems. Files in MR-AFS therefore may be migrated on secondary storage, such as roboted tape libraries. MR-AFS is in use at IPP for the current experiments and data originating from super-computer applications. Experiences and scalability issues are discussed

Access to DIII-D data located in multiple files and multiple locations

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1993-10-01

The General Atomics DIII-D tokamak fusion experiment is now collecting over 80 MB of data per discharge once every 10 min, and that quantity is expected to double within the next year. The size of the data files, even in compressed format, is becoming increasingly difficult to handle. Data is also being acquired now on a variety of UNIX systems as well as MicroVAX and MODCOMP computer systems. The existing computers collect all the data into a single shot file, and this data collection is taking an ever increasing amount of time as the total quantity of data increases. Data is not available to experimenters until it has been collected into the shot file, which is in conflict with the substantial need for data examination on a timely basis between shots. The experimenters are also spread over many different types of computer systems (possibly located at other sites). To improve data availability and handling, software has been developed to allow individual computer systems to create their own shot files locally. The data interface routine PTDATA that is used to access DIII-D data has been modified so that a user's code on any computer can access data from any computer where that data might be located. This data access is transparent to the user. Breaking up the shot file into separate files in multiple locations also impacts software used for data archiving, data management, and data restoration

Carriage of methicillin-resistant Staphylococcus pseudintermedius in small animal veterinarians

DEFF Research Database (Denmark)

Paul, Narayan Chandra; Moodley, Arshnee; Ghibaudo, G.

2011-01-01

Methicillin-resistant Staphylococcus pseudintermedius (MRSP) is increasingly reported in small animals and cases of human infections have already been described despite its recent emergence in veterinary practice. We investigated the prevalence of MRSP and methicillin-resistant Staphylococcus...... aureus (MRSA) among small animal dermatologists attending a national veterinary conference in Italy. Nasal swabs were obtained from 128 veterinarians, seven of which harboured MRSP (n = 5; 3.9%) or MRSA (n = 2; 1.6%). A follow-up study of two carriers revealed that MRSP persisted for at least 1 month...... by spa typing. Methicillin-resistant isolates were further typed by antimicrobial susceptibility testing, SCCmec and multi-locus sequence typing. Two lineages previously associated with pets were identified among the five MRSP isolates; the European epidemic clone ST71-SCCmec II-III and ST106-SCCmec IV...

Farmer and Veterinarian Attitudes towards the Bovine Tuberculosis Eradication Programme in Spain: What Is Going on in the Field?

Science.gov (United States)

Ciaravino, Giovanna; Ibarra, Patricia; Casal, Ester; Lopez, Sergi; Espluga, Josep; Casal, Jordi; Napp, Sebastian; Allepuz, Alberto

2017-01-01

The effectiveness of health interventions against bovine tuberculosis (bTB) is influenced by several " non-biological " factors that may hamper bTB detection and control. Although the engagement of stakeholders is a key factor for the eradication programme's success, social factors have been often ignored in the control programmes of animal diseases, especially in developed countries. In this study, we used a qualitative approach to investigate perceptions, opinions, attitudes, and beliefs of farmers, and veterinarians who may influence the effectiveness of the Spanish bTB eradication programme. The study was carried out in two phases. First, 13 key representatives of different groups involved in the programme were interviewed through exploratory interviews to identify most relevant themes circulating in the population. Interviews focused on strong and weak points of the programme; reasons for failure to achieve eradication; benefits of being disease free; future perspectives, and proposed changes to the programme. Based on these results, a thematic guide was developed and detailed information was gained through face-to-face in-depth interviews conducted on a purposive sample of 39 farmers and veterinarians. Data were analysed following an ethnographic methodology. Main results suggested that the bTB programme is perceived as a law enforcement duty without an adequate motivation of some stakeholders and a general feeling of distrust arose. The complexity of bTB epidemiology combined with gaps in knowledge and weak communication throughout stakeholders contributed to causing disbeliefs, which in turn generated different kinds of guesses and interpretations. Low reliability in the routine skin test for bTB screening was expressed and the level of confidence on test results interpretation was linked with skills and experience of public and private veterinarians in the field. Lack of training for farmers and pressure faced by veterinarians during field activities also

Farmer and Veterinarian Attitudes towards the Bovine Tuberculosis Eradication Programme in Spain: What Is Going on in the Field?

Directory of Open Access Journals (Sweden)

Giovanna Ciaravino

2017-11-01

Full Text Available The effectiveness of health interventions against bovine tuberculosis (bTB is influenced by several “non-biological” factors that may hamper bTB detection and control. Although the engagement of stakeholders is a key factor for the eradication programme’s success, social factors have been often ignored in the control programmes of animal diseases, especially in developed countries. In this study, we used a qualitative approach to investigate perceptions, opinions, attitudes, and beliefs of farmers, and veterinarians who may influence the effectiveness of the Spanish bTB eradication programme. The study was carried out in two phases. First, 13 key representatives of different groups involved in the programme were interviewed through exploratory interviews to identify most relevant themes circulating in the population. Interviews focused on strong and weak points of the programme; reasons for failure to achieve eradication; benefits of being disease free; future perspectives, and proposed changes to the programme. Based on these results, a thematic guide was developed and detailed information was gained through face-to-face in-depth interviews conducted on a purposive sample of 39 farmers and veterinarians. Data were analysed following an ethnographic methodology. Main results suggested that the bTB programme is perceived as a law enforcement duty without an adequate motivation of some stakeholders and a general feeling of distrust arose. The complexity of bTB epidemiology combined with gaps in knowledge and weak communication throughout stakeholders contributed to causing disbeliefs, which in turn generated different kinds of guesses and interpretations. Low reliability in the routine skin test for bTB screening was expressed and the level of confidence on test results interpretation was linked with skills and experience of public and private veterinarians in the field. Lack of training for farmers and pressure faced by veterinarians during

Suicidality in the veterinary profession: interview study of veterinarians with a history of suicidal ideation or behavior.

Science.gov (United States)

Platt, Belinda; Hawton, Keith; Simkin, Sue; Dean, Rachel; Mellanby, Richard J

2012-01-01

Suicide rates are elevated in the veterinary profession in several countries, yet little is known about possible contributory and preventive factors. To obtain information from veterinarians with a history of suicidal ideation or behavior about the factors associated with suicidality in their profession. We conducted a mixed-methods interview study with 21 UK veterinarians who had attempted suicide or reported recent suicidal ideation. Interview topics included work and nonwork contributory factors, coping mechanisms, and preventive factors. Self-poisoning was the most common method used or considered by participants. Common contributory factors were workplace relationships, career concerns, patient issues, number of hours and volume of work, and responsibility, although two-thirds of participants reported co-occurring difficult life events. Around half had received a psychiatric diagnosis following their suicidal behavior. Several possible preventive measures were suggested by participants. Several work- and non-work-related contributory factors to suicidality in the veterinary profession were identified. Future preventive measures may involve better promotion of support services, formal support for recent graduates, and improving employers' attitudes toward work-life balance.

A survey on parasite management by equine veterinarians highlights the need for a regulation change.

Science.gov (United States)

Sallé, Guillaume; Cabaret, Jacques

2015-01-01

In-depth knowledge of the use of anthelminthics in the field, especially by veterinarians, is required to design more sustainable parasite control strategies. An online survey was sent by e-mail to 940 equine veterinary practitioners to describe their equine practice, their awareness about parasites and the management strategies they apply. Gastrointestinal parasites were generally considered (68%) as an issue of moderate importance. Drug efficacy failure was a minor or moderate issue for 47% and 48% of responders, respectively. Parasite management mostly relied on the use of systematic calendar treatments across a wide variety of horse owners (ie, riding schools, studs or hobby horse owners). Almost half of the practitioners (42%) never performed Faecal Egg Count (FEC) before drenching. Horse owners or their employees in charge of equines were reported to be the only person managing drenching in 59% of the collected answers. This was associated with the report of many off-label uses of anthelmintics and the frequent buying of drugs using the internet. Given the critical situation regarding anthelmintic resistance, it seems necessary for veterinarians to reclaim parasite management and prevention as a specific topic. Implementation of stricter regulations for use of anthelmintics, like the one applied in Denmark, may make parasitic management in equids more sustainable.

JNDC FP decay data file

International Nuclear Information System (INIS)

Yamamoto, Tohru; Akiyama, Masatsugu

1981-02-01

The decay data file for fission product nuclides (FP DECAY DATA FILE) has been prepared for summation calculation of the decay heat of fission products. The average energies released in β- and γ-transitions have been calculated with computer code PROFP. The calculated results and necessary information have been arranged in tabular form together with the estimated results for 470 nuclides of which decay data are not available experimentally. (author)

File-System Workload on a Scientific Multiprocessor

Science.gov (United States)

Kotz, David; Nieuwejaar, Nils

1995-01-01

Many scientific applications have intense computational and I/O requirements. Although multiprocessors have permitted astounding increases in computational performance, the formidable I/O needs of these applications cannot be met by current multiprocessors a their I/O subsystems. To prevent I/O subsystems from forever bottlenecking multiprocessors and limiting the range of feasible applications, new I/O subsystems must be designed. The successful design of computer systems (both hardware and software) depends on a thorough understanding of their intended use. A system designer optimizes the policies and mechanisms for the cases expected to most common in the user's workload. In the case of multiprocessor file systems, however, designers have been forced to build file systems based only on speculation about how they would be used, extrapolating from file-system characterizations of general-purpose workloads on uniprocessor and distributed systems or scientific workloads on vector supercomputers (see sidebar on related work). To help these system designers, in June 1993 we began the Charisma Project, so named because the project sought to characterize 1/0 in scientific multiprocessor applications from a variety of production parallel computing platforms and sites. The Charisma project is unique in recording individual read and write requests-in live, multiprogramming, parallel workloads (rather than from selected or nonparallel applications). In this article, we present the first results from the project: a characterization of the file-system workload an iPSC/860 multiprocessor running production, parallel scientific applications at NASA's Ames Research Center.

Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography -An In Vitro Study.

Science.gov (United States)

Dhingra, Annil; Ruhal, Nidhi; Miglani, Anjali

2015-04-01

Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness.

Distributed Data Management and Distributed File Systems

CERN Document Server

Girone, Maria

2015-01-01

The LHC program has been successful in part due to the globally distributed computing resources used for collecting, serving, processing, and analyzing the large LHC datasets. The introduction of distributed computing early in the LHC program spawned the development of new technologies and techniques to synchronize information and data between physically separated computing centers. Two of the most challenges services are the distributed file systems and the distributed data management systems. In this paper I will discuss how we have evolved from local site services to more globally independent services in the areas of distributed file systems and data management and how these capabilities may continue to evolve into the future. I will address the design choices, the motivations, and the future evolution of the computing systems used for High Energy Physics.

Methods and Algorithms for Detecting Objects in Video Files

Directory of Open Access Journals (Sweden)

Nguyen The Cuong

2018-01-01

Full Text Available Video files are files that store motion pictures and sounds like in real life. In today's world, the need for automated processing of information in video files is increasing. Automated processing of information has a wide range of application including office/home surveillance cameras, traffic control, sports applications, remote object detection, and others. In particular, detection and tracking of object movement in video file plays an important role. This article describes the methods of detecting objects in video files. Today, this problem in the field of computer vision is being studied worldwide.

Recalling ISX shot data files from the off-line archive

International Nuclear Information System (INIS)

Stanton, J.S.

1981-02-01

This document describes a set of computer programs designed to allow access to ISX shot data files stored on off-line disk packs. The programs accept user requests for data files and build a queue of end requests. When an operator is available to mount the necessary disk packs, the system copies the requested files to an on-line disk area. The program runs on the Fusion Energy Division's DECsystem-10 computer. The request queue is implemented under the System 1022 data base management system. The support programs are coded in MACRO-10 and FORTRAN-10

Utilizing HDF4 File Content Maps for the Cloud

Science.gov (United States)

Lee, Hyokyung Joe

2016-01-01

We demonstrate a prototype study that HDF4 file content map can be used for efficiently organizing data in cloud object storage system to facilitate cloud computing. This approach can be extended to any binary data formats and to any existing big data analytics solution powered by cloud computing because HDF4 file content map project started as long term preservation of NASA data that doesn't require HDF4 APIs to access data.

Download this PDF file

African Journals Online (AJOL)

USER

In recent times, veterinarians and animal scientists have ... Fish farming otherwise known as fish culture is a ... farmers identified lack of finance, lack of good ... Vol. 32(3): 2011; 226 - 229. ARTICLE. Fish Production In Nigeria: An Update.

29 CFR 4000.28 - What if I send a computer disk?

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false What if I send a computer disk? 4000.28 Section 4000.28... I send a computer disk? (a) In general. We determine your filing or issuance date for a computer... paragraph (b) of this section. (1) Filings. For computer-disk filings, we may treat your submission as...

Cloud object store for checkpoints of high performance computing applications using decoupling middleware

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary

2016-04-19

Cloud object storage is enabled for checkpoints of high performance computing applications using a middleware process. A plurality of files, such as checkpoint files, generated by a plurality of processes in a parallel computing system are stored by obtaining said plurality of files from said parallel computing system; converting said plurality of files to objects using a log structured file system middleware process; and providing said objects for storage in a cloud object storage system. The plurality of processes may run, for example, on a plurality of compute nodes. The log structured file system middleware process may be embodied, for example, as a Parallel Log-Structured File System (PLFS). The log structured file system middleware process optionally executes on a burst buffer node.

File access prediction using neural networks.

Science.gov (United States)

Patra, Prashanta Kumar; Sahu, Muktikanta; Mohapatra, Subasish; Samantray, Ronak Kumar

2010-06-01

One of the most vexing issues in design of a high-speed computer is the wide gap of access times between the memory and the disk. To solve this problem, static file access predictors have been used. In this paper, we propose dynamic file access predictors using neural networks to significantly improve upon the accuracy, success-per-reference, and effective-success-rate-per-reference by using neural-network-based file access predictor with proper tuning. In particular, we verified that the incorrect prediction has been reduced from 53.11% to 43.63% for the proposed neural network prediction method with a standard configuration than the recent popularity (RP) method. With manual tuning for each trace, we are able to improve upon the misprediction rate and effective-success-rate-per-reference using a standard configuration. Simulations on distributed file system (DFS) traces reveal that exact fit radial basis function (RBF) gives better prediction in high end system whereas multilayer perceptron (MLP) trained with Levenberg-Marquardt (LM) backpropagation outperforms in system having good computational capability. Probabilistic and competitive predictors are the most suitable for work stations having limited resources to deal with and the former predictor is more efficient than the latter for servers having maximum system calls. Finally, we conclude that MLP with LM backpropagation algorithm has better success rate of file prediction than those of simple perceptron, last successor, stable successor, and best k out of m predictors.

pcircle - A Suite of Scalable Parallel File System Tools

Energy Technology Data Exchange (ETDEWEB)

2015-10-01

Most of the software related to file system are written for conventional local file system, they are serialized and can't take advantage of the benefit of a large scale parallel file system. "pcircle" software builds on top of ubiquitous MPI in cluster computing environment and "work-stealing" pattern to provide a scalable, high-performance suite of file system tools. In particular - it implemented parallel data copy and parallel data checksumming, with advanced features such as async progress report, checkpoint and restart, as well as integrity checking.

Micro computed tomography evaluation of the Self-adjusting file and ProTaper Universal system on curved mandibular molars.

Science.gov (United States)

Serefoglu, Burcu; Piskin, Beyser

2017-09-26

The aim of this investigation was to compare the cleaning and shaping efficiency of Self-adjusting file and Protaper, and to assess the correlation between root canal curvature and working time in mandibular molars using micro-computed tomography. Twenty extracted mandibular molars instrumented with Protaper and Self-adjusting file and the total working time was measured in mesial canals. The changes in canal volume, surface area and structure model index, transportation, uninstrumented area and the correlation between working-time and the curvature were analyzed. Although no statistically significant difference was observed between two systems in distal canals (p>0.05), a significantly higher amount of removed dentin volume and lower uninstrumented area were provided by Protaper in mesial canals (p<0.0001). A correlation between working-time and the canal-curvature was also observed in mesial canals for both groups (SAFr 2 =0.792, p<0.0004, PTUr 2 =0.9098, p<0.0001).

Self-reported musculoskeletal disorders of the distal upper extremities and the neck in German veterinarians: a cross-sectional study.

Directory of Open Access Journals (Sweden)

Agnessa Kozak

Full Text Available BACKGROUND: Veterinary work is a physically demanding profession and entails the risk of injuries and diseases of the musculoskeletal system, particularly in the upper body. The prevalence of musculoskeletal disorders (MSD, the consequences and work-related accidents in German veterinarians were investigated. Work-related and individual factors associated with MSD of upper extremities and the neck were analyzed. METHODS: In 2011, a self-reporting Standardized Nordic Questionnaire was mailed to registered veterinarians in seven federal medical associations in Germany. A total of 3174 (38.4% veterinarians responded. Logistic regression analysis was used to determine the association between risk factors and MSD-related impairment of daily activities. RESULTS: MSD in the neck (66.6% and shoulder (60.5% were more prevalent than in the hand (34.5% or elbow (24.5%. Normal activities were affected in 28.7% (neck, 29.5% (shoulder, 19.4% (hand and 14% (elbow of the respondents. MSD in the upper body occurred significantly more often in large animal practitioners. Accidents that resulted in MSD were most frequently reported in the hand/wrist (14.3% or in the shoulder (10.8%. The majority of all accidents in the distal upper extremities were caused by animals than by other factors (19% vs. 9.2%. For each area of the body, a specific set of individual and work-related factors contributed significantly to severe MSD: Older age, gender, previous injuries, BMI, practice type, veterinary procedures such as dentistry, rectal procedures and obstetric procedures as well as high demands and personal burnout. CONCLUSION: From the perspective of occupational health and safety, it seems to be necessary to improve accident prevention and to optimize the ergonomics of specific tasks. Our data suggest the need for target group-specific preventive measures that also focus on the psychological factors at work.

Globus File Transfer Services | High-Performance Computing | NREL

Science.gov (United States)

installed on the systems at both ends of the data transfer. The NREL endpoint is nrel#globus. Click Login on the Globus web site. On the login page select "Globus ID" as the login method and click Login to the Globus website. From the Manage Data drop down menu, select Transfer Files. Then click Get

75 FR 30839 - Privacy Act of 1974; CMS Computer Match No. 2010-03, HHS Computer Match No. 1003, SSA Computer...

Science.gov (United States)

2010-06-02

... 1974; CMS Computer Match No. 2010-03, HHS Computer Match No. 1003, SSA Computer Match No. 1048, IRS... Services (CMS). ACTION: Notice of renewal of an existing computer matching program (CMP) that has an...'' section below for comment period. DATES: Effective Dates: CMS filed a report of the Computer Matching...

Cloud object store for archive storage of high performance computing data using decoupling middleware

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary

2015-06-30

Cloud object storage is enabled for archived data, such as checkpoints and results, of high performance computing applications using a middleware process. A plurality of archived files, such as checkpoint files and results, generated by a plurality of processes in a parallel computing system are stored by obtaining the plurality of archived files from the parallel computing system; converting the plurality of archived files to objects using a log structured file system middleware process; and providing the objects for storage in a cloud object storage system. The plurality of processes may run, for example, on a plurality of compute nodes. The log structured file system middleware process may be embodied, for example, as a Parallel Log-Structured File System (PLFS). The log structured file system middleware process optionally executes on a burst buffer node.

A data compression algorithm for nuclear spectrum files

International Nuclear Information System (INIS)

Mika, J.F.; Martin, L.J.; Johnston, P.N.

1990-01-01

The total space occupied by computer files of spectra generated in nuclear spectroscopy systems can lead to problems of storage, and transmission time. An algorithm is presented which significantly reduces the space required to store nuclear spectra, without loss of any information content. Testing indicates that spectrum files can be routinely compressed by a factor of 5. (orig.)

Antemortem diagnosis of human rabies in a veterinarian infected when handling a herbivore in Minas Gerais, Brazil

Directory of Open Access Journals (Sweden)

Mariana Gontijo de Brito

2011-02-01

Full Text Available The Ministry of Health's National Human Rabies Control Program advocates pre-exposure prophylaxis (PEP for professionals involved with animals that are at risk of contracting rabies. We report an antemortem and postmortem diagnosis of rabies in a veterinarian who became infected when handling herbivores with rabies. The antemortem diagnosis was carried out with a saliva sample and a biopsy of hair follicles using molecular biology techniques, while the postmortem diagnosis used a brain sample and conventional techniques. The veterinarian had collected samples to diagnose rabies in suspect herbivores (bovines and caprines that were subsequently confirmed to be positive in laboratory tests. After onset of classic rabies symptoms, saliva and hair follicles were collected and used for antemortem diagnostic tests and found to be positive by RT-PCR. Genetic sequencing showed that the infection was caused by variant 3 (Desmodus rotundus, a finding confirmed by tests on the brain sample. It is essential that professionals who are at risk of infection by the rabies virus undergo pre-exposure prophylaxis. This study also confirms that molecular biology techniques were used successfully for antemortem diagnosis and therefore not only allow therapeutic methods to be developed, but also enable the source of infection in human rabies cases to be identified accurately and quickly.

South Bellmore Veterinary Group Review: How to choose a good local veterinarian for your pets

OpenAIRE

Debrah

2018-01-01

You need time and patience in looking for the right veterinarian for your pets even if it’s just within your area or city. You also need to consider the current situation of your pets in choosing a good vet. A few types of research have seen many pet owners turn to using a holistic approach. Similar on how South Bellmore Veterinary Group views the process of choosing a vet, you should as well look for a trustworthy vet as if you’re finding the right family doctor for yourself. It would be...

The crystallographic information file (CIF): A new standard archive file for crystallography

International Nuclear Information System (INIS)

Hall, S.R.; Allen, F.H.; Brown, I.D.

1991-01-01

The specification of a new standard Crystallographic Information File (CIF) is described. Its development is based on the Self-Defining Text Archieve and Retrieval (STAR) procedure. The CIF is a general, flexible and easily extensible free-format archive file; it is human and machine readable and can be edited by a simple editor. The CIF is designed for the electronic transmission of crystallographic data between individual laboratories, journals and databases: It has been adopted by the International Union of Crystallography as the recommended medium for this purpose. The file consists of data names and data items, together with a loop facility for repeated items. The data names, constructed hierarchically so as to form data categories, are self-descriptive within a 32-character limit. The sorted list of data names, together with their precise definitions, constitutes the CIF dictionary (core version 1991). The CIF core dictionary is presented in full and covers the fundamental and most commonly used data items relevant to crystal structure analysis. The dictionary is also available as an electronic file suitable for CIF computer applications. Future extensions to the dictionary will include data items used in more specialized areas of crystallography. (orig.)

An information retrieval system for research file data

Science.gov (United States)

Joan E. Lengel; John W. Koning

1978-01-01

Research file data have been successfully retrieved at the Forest Products Laboratory through a high-speed cross-referencing system involving the computer program FAMULUS as modified by the Madison Academic Computing Center at the University of Wisconsin. The method of data input, transfer to computer storage, system utilization, and effectiveness are discussed....

The global unified parallel file system (GUPFS) project: FY 2002 activities and results

Energy Technology Data Exchange (ETDEWEB)

Butler, Gregory F.; Lee, Rei Chi; Welcome, Michael L.

2003-04-07

The Global Unified Parallel File System (GUPFS) project is a multiple-phase, five-year project at the National Energy Research Scientific Computing (NERSC) Center to provide a scalable, high performance, high bandwidth, shared file system for all the NERSC production computing and support systems. The primary purpose of the GUPFS project is to make it easier to conduct advanced scientific research using the NERSC systems. This is to be accomplished through the use of a shared file system providing a unified file namespace, operating on consolidated shared storage that is directly accessed by all the NERSC production computing and support systems. During its first year, FY 2002, the GUPFS project focused on identifying, testing, and evaluating existing and emerging shared/cluster file system, SAN fabric, and storage technologies; identifying NERSC user input/output (I/O) requirements, methods, and mechanisms; and developing appropriate benchmarking methodologies and benchmark codes for a parallel environment. This report presents the activities and progress of the GUPFS project during its first year, the results of the evaluations conducted, and plans for near-term and longer-term investigations.

LASIP-III, a generalized processor for standard interface files

International Nuclear Information System (INIS)

Bosler, G.E.; O'Dell, R.D.; Resnik, W.M.

1976-03-01

The LASIP-III code was developed for processing Version III standard interface data files which have been specified by the Committee on Computer Code Coordination. This processor performs two distinct tasks, namely, transforming free-field format, BCD data into well-defined binary files and providing for printing and punching data in the binary files. While LASIP-III is exported as a complete free-standing code package, techniques are described for easily separating the processor into two modules, viz., one for creating the binary files and one for printing the files. The two modules can be separated into free-standing codes or they can be incorporated into other codes. Also, the LASIP-III code can be easily expanded for processing additional files, and procedures are described for such an expansion. 2 figures, 8 tables

CryptoCache: A Secure Sharable File Cache for Roaming Users

DEFF Research Database (Denmark)

Jensen, Christian D.

2000-01-01

. Conventional distributed file systems cache everything locally or not at all; there is no possibility to cache files on nearby nodes.In this paper we present the design of a secure cache system called CryptoCache that allows roaming users to cache files on untrusted file hosting servers. The system allows...... flexible sharing of cached files among unauthenticated users, i.e. unlike most distributed file systems CryptoCache does not require a global authentication framework.Files are encrypted when they are transferred over the network and while stored on untrusted servers. The system uses public key......Small mobile computers are now sufficiently powerful to run many applications, but storage capacity remains limited so working files cannot be cached or stored locally. Even if files can be stored locally, the mobile device is not powerful enough to act as server in collaborations with other users...

GEODOC: the GRID document file, record structure and data element description

Energy Technology Data Exchange (ETDEWEB)

Trippe, T.; White, V.; Henderson, F.; Phillips, S.

1975-11-06

The purpose of this report is to describe the information structure of the GEODOC file. GEODOC is a computer based file which contains the descriptive cataloging and indexing information for all documents processed by the National Geothermal Information Resource Group. This file (along with other GRID files) is managed by DBMS, the Berkeley Data Base Management System. Input for the system is prepared using the IRATE Text Editing System with its extended (12 bit) character set, or punched cards.

Virus Alert: Ten Steps to Safe Computing.

Science.gov (United States)

Gunter, Glenda A.

1997-01-01

Discusses computer viruses and explains how to detect them; discusses virus protection and the need to update antivirus software; and offers 10 safe computing tips, including scanning floppy disks and commercial software, how to safely download files from the Internet, avoiding pirated software copies, and backing up files. (LRW)

Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study.

Science.gov (United States)

Agarwal, Rolly S; Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

2015-05-01

The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20(o) to 35(o) were divided into three groups of 20 samples each: ProTaper PT (group I) - full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO - single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey's honestly significant difference test. It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant. It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal transportation and centering ability comparable to full sequence

Comparative Analysis of Canal Centering Ability of Different Single File Systems Using Cone Beam Computed Tomography- An In-Vitro Study

Science.gov (United States)

Agarwal, Jatin; Jain, Pradeep; Chandra, Anil

2015-01-01

Background The ability of an endodontic instrument to remain centered in the root canal system is one of the most important characteristic influencing the clinical performance of a particular file system. Thus, it is important to assess the canal centering ability of newly introduced single file systems before they can be considered a viable replacement of full-sequence rotary file systems. Aim The aim of the study was to compare the canal transportation, centering ability, and time taken for preparation of curved root canals after instrumentation with single file systems One Shape and Wave One, using cone-beam computed tomography (CBCT). Materials and Methods Sixty mesiobuccal canals of mandibular molars with an angle of curvature ranging from 20o to 35o were divided into three groups of 20 samples each: ProTaper PT (group I) – full-sequence rotary control group, OneShape OS (group II)- single file continuous rotation, WaveOne WO – single file reciprocal motion (group III). Pre instrumentation and post instrumentation three-dimensional CBCT images were obtained from root cross-sections at 3mm, 6mm and 9mm from the apex. Scanned images were then accessed to determine canal transportation and centering ability. The data collected were evaluated using one-way analysis of variance (ANOVA) with Tukey’s honestly significant difference test. Results It was observed that there were no differences in the magnitude of transportation between the rotary instruments (p >0.05) at both 3mm as well as 6mm from the apex. At 9 mm from the apex, Group I PT showed significantly higher mean canal transportation and lower centering ability (0.19±0.08 and 0.39±0.16), as compared to Group II OS (0.12±0.07 and 0.54±0.24) and Group III WO (0.13±0.06 and 0.55±0.18) while the differences between OS and WO were not statistically significant Conclusion It was concluded that there was minor difference between the tested groups. Single file systems demonstrated average canal

ChemEngine: harvesting 3D chemical structures of supplementary data from PDF files.

Science.gov (United States)

Karthikeyan, Muthukumarasamy; Vyas, Renu

2016-01-01

Digital access to chemical journals resulted in a vast array of molecular information that is now available in the supplementary material files in PDF format. However, extracting this molecular information, generally from a PDF document format is a daunting task. Here we present an approach to harvest 3D molecular data from the supporting information of scientific research articles that are normally available from publisher's resources. In order to demonstrate the feasibility of extracting truly computable molecules from PDF file formats in a fast and efficient manner, we have developed a Java based application, namely ChemEngine. This program recognizes textual patterns from the supplementary data and generates standard molecular structure data (bond matrix, atomic coordinates) that can be subjected to a multitude of computational processes automatically. The methodology has been demonstrated via several case studies on different formats of coordinates data stored in supplementary information files, wherein ChemEngine selectively harvested the atomic coordinates and interpreted them as molecules with high accuracy. The reusability of extracted molecular coordinate data was demonstrated by computing Single Point Energies that were in close agreement with the original computed data provided with the articles. It is envisaged that the methodology will enable large scale conversion of molecular information from supplementary files available in the PDF format into a collection of ready- to- compute molecular data to create an automated workflow for advanced computational processes. Software along with source codes and instructions available at https://sourceforge.net/projects/chemengine/files/?source=navbar.Graphical abstract.

Evaluation of Single File Systems Reciproc, Oneshape, and WaveOne using Cone Beam Computed Tomography –An In Vitro Study

Science.gov (United States)

Dhingra, Annil; Miglani, Anjali

2015-01-01

Background Successful endodontic therapy depends on many factor, one of the most important step in any root canal treatment is root canal preparation. In addition, respecting the original shape of the canal is of the same importance; otherwise, canal aberrations such as transportation will be created. Aim The purpose of this study is to compare and evaluate Reciprocating WaveOne ,Reciproc and Rotary Oneshape Single File Instrumentation System On Cervical Dentin Thickness, Cross Sectional Area and Canal Transportation on First Mandibular Molar Using Cone Beam Computed Tomography. Materials and Methods Sixty Mandibular First Molars extracted due to periodontal reason was collected from the Department of Oral and Maxillofacial. Teeth were prepared using one rotary and two reciprocating single file system. Teeth were divided into 3 groups 20 teeth in each group. Pre instrumentation and Post instrumentation scans was done and evaluated for three parameters Canal Transportation, Cervical Dentinal Thickness, Cross-sectional Area. Results were analysed statistically using ANOVA, Post-Hoc Tukey analysis. Results The change in cross-sectional area after filing showed significant difference at 0mm, 1mm, 2mm and 7mm (pfile system over a distance of 7 mm (starting from 0mm and then evaluation at 1mm, 2mm, 3mm, 5mm and 7mm), the results showed a significant difference among the file systems at various lengths (p= 0.014, 0.046, 0.004, 0.028, 0.005 & 0.029 respectively). Mean value of cervical dentinal removal is maximum at all the levels for oneshape and minimum for waveone showing the better quality of waveone and reciproc over oneshape file system. Significant difference was found at 9mm, 11mm and 12mm between all the three file systems (p<0.001,< 0.001, <0.001). Conclusion It was concluded that reciprocating motion is better than rotary motion in all the three parameters Canal Transportation, Cross-sectional Area, Cervical Dentinal Thickness. PMID:26023639

RRB / SSI Interface Checkwriting Integrated Computer Operation Extract File (CHICO)

Data.gov (United States)

Social Security Administration — This monthly file provides SSA with information about benefit payments made to railroad retirement beneficiaries. SSA uses this data to verify Supplemental Security...

The Improvement and Performance of Mobile Environment Using Both Cloud and Text Computing

OpenAIRE

S.Saravana Kumar; J.Lakshmi Priya; P.Hannah Jennifer; N.Jeff Monica; Fathima

2013-01-01

In this research paper presents an design model for file sharing system for ubiquitos mobile devices using both cloud and text computing. File s haring is one of the rationales for computer networks with increasing demand for file sharing ap plications and technologies in small and large enterprise networks and on the Internet. File transfer is an important process in any form of computing as we need to really share the data ac ross. ...

Dynamic file-access characteristics of a production parallel scientific workload

Science.gov (United States)

Kotz, David; Nieuwejaar, Nils

1994-01-01

Multiprocessors have permitted astounding increases in computational performance, but many cannot meet the intense I/O requirements of some scientific applications. An important component of any solution to this I/O bottleneck is a parallel file system that can provide high-bandwidth access to tremendous amounts of data in parallel to hundreds or thousands of processors. Most successful systems are based on a solid understanding of the expected workload, but thus far there have been no comprehensive workload characterizations of multiprocessor file systems. This paper presents the results of a three week tracing study in which all file-related activity on a massively parallel computer was recorded. Our instrumentation differs from previous efforts in that it collects information about every I/O request and about the mix of jobs running in a production environment. We also present the results of a trace-driven caching simulation and recommendations for designers of multiprocessor file systems.

Tabulation of Fundamental Assembly Heat and Radiation Source Files

International Nuclear Information System (INIS)

T. deBues; J.C. Ryman

2006-01-01

The purpose of this calculation is to tabulate a set of computer files for use as input to the WPLOAD thermal loading software. These files contain details regarding heat and radiation from pressurized water reactor (PWR) assemblies and boiling water reactor (BWR) assemblies. The scope of this calculation is limited to rearranging and reducing the existing file information into a more streamlined set of tables for use as input to WPLOAD. The electronic source term files used as input to this calculation were generated from the output files of the SAS2H/ORIGIN-S sequence of the SCALE Version 4.3 modular code system, as documented in References 2.1.1 and 2.1.2, and are included in Attachment II

COMPUTING

CERN Multimedia

M. Kasemann

CCRC’08 challenges and CSA08 During the February campaign of the Common Computing readiness challenges (CCRC’08), the CMS computing team had achieved very good results. The link between the detector site and the Tier0 was tested by gradually increasing the number of parallel transfer streams well beyond the target. Tests covered the global robustness at the Tier0, processing a massive number of very large files and with a high writing speed to tapes.  Other tests covered the links between the different Tiers of the distributed infrastructure and the pre-staging and reprocessing capacity of the Tier1’s: response time, data transfer rate and success rate for Tape to Buffer staging of files kept exclusively on Tape were measured. In all cases, coordination with the sites was efficient and no serious problem was found. These successful preparations prepared the ground for the second phase of the CCRC’08 campaign, in May. The Computing Software and Analysis challen...

The design and development of GRASS file reservation system

International Nuclear Information System (INIS)

Huang Qiulan; Zhu Suijiang; Cheng Yaodong; Chen Gang

2010-01-01

GFRS (GRASS File Reservation System) is designed to improve the file access performance of GRASS (Grid-enabled Advanced Storage System) which is a Hierarchical Storage Management (HSM) system developed at Computing Center, Institute of High Energy Physics. GRASS can provide massive storage management and data migration, but the data migration policy is simply based factors such as pool water level, the intervals for migration and so on, so it is short of precise control over files. As for that, we design GFRS to implement user-based file reservation which is to reserve and keep the required files on disks for High Energy physicists. CFRS can improve file access speed for users by avoiding migrating frequently accessed files to tapes. In this paper we first give a brief introduction of GRASS system and then detailed architecture and implementation of GFRS. Experiments results from GFRS have shown good performance and a simple analysis is made based on it. (authors)

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

CERN Document Server

Wiley, R A

1977-01-01

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

Equine Vaccines: How, When and Why? Report of the Vaccinology Session, French Equine Veterinarians Association, 2016, Reims

Directory of Open Access Journals (Sweden)

Romain Paillot

2017-12-01

Full Text Available To date, vaccination is one of the most efficient methods of prevention against equine infectious diseases. The vaccinology session, which was organised during the annual meeting of the French Equine Veterinarians Association (AVEF at Reims (France in 2016, aimed to approach three subjects of importance for the equine industry. Vaccination against three major equine diseases were used as examples: equine influenza (equine influenza virus, rhinopneumonitis (equine herpes virus 1/4, and tetanus (Clostridium tetani neuro-toxin. (1 Emergency vaccination: while it has been very successful to reduce the impact of equine influenza epizooties and it is also recommended for tetanus in case of surgery and accident, the benefit of emergency vaccination against equine herpes virus 1/4 remains arguable; (2 Compatibility of equine vaccines from different brands: despite being a frequent concerns for equine veterinarians, little information is available about the compatibility of equine vaccines from different commercial origins. The consequence of mixing different equine vaccines targeting the same disease is believed to be limited but scientific evidences are sparse; and, (3 Laps vaccination and vaccine shortage: they could have serious consequences in terms of protection and their impact should be evaluated on a case by case basis, taking into account the risk of contact with the pathogen and the effect on herd immunity.

New developments in file-based infrastructure for ATLAS event selection

Energy Technology Data Exchange (ETDEWEB)

Gemmeren, P van; Malon, D M [Argonne National Laboratory, Argonne, Illinois 60439 (United States); Nowak, M, E-mail: gemmeren@anl.go [Brookhaven National Laboratory, Upton, NY 11973-5000 (United States)

2010-04-01

In ATLAS software, TAGs are event metadata records that can be stored in various technologies, including ROOT files and relational databases. TAGs are used to identify and extract events that satisfy certain selection predicates, which can be coded as SQL-style queries. TAG collection files support in-file metadata to store information describing all events in the collection. Event Selector functionality has been augmented to provide such collection-level metadata to subsequent algorithms. The ATLAS I/O framework has been extended to allow computational processing of TAG attributes to select or reject events without reading the event data. This capability enables physicists to use more detailed selection criteria than are feasible in an SQL query. For example, the TAGs contain enough information not only to check the number of electrons, but also to calculate their distance to the closest jet-a calculation that would be difficult to express in SQL. Another new development allows ATLAS to write TAGs directly into event data files. This feature can improve performance by supporting advanced event selection capabilities, including computational processing of TAG information, without the need for external TAG file or database access.

Prefetching in file systems for MIMD multiprocessors

Science.gov (United States)

Kotz, David F.; Ellis, Carla Schlatter

1990-01-01

The question of whether prefetching blocks on the file into the block cache can effectively reduce overall execution time of a parallel computation, even under favorable assumptions, is considered. Experiments have been conducted with an interleaved file system testbed on the Butterfly Plus multiprocessor. Results of these experiments suggest that (1) the hit ratio, the accepted measure in traditional caching studies, may not be an adequate measure of performance when the workload consists of parallel computations and parallel file access patterns, (2) caching with prefetching can significantly improve the hit ratio and the average time to perform an I/O (input/output) operation, and (3) an improvement in overall execution time has been observed in most cases. In spite of these gains, prefetching sometimes results in increased execution times (a negative result, given the optimistic nature of the study). The authors explore why it is not trivial to translate savings on individual I/O requests into consistently better overall performance and identify the key problems that need to be addressed in order to improve the potential of prefetching techniques in the environment.

[Comparison of effectiveness and safety between Twisted File technique and ProTaper Universal rotary full sequence based on micro-computed tomography].

Science.gov (United States)

Chen, Xiao-bo; Chen, Chen; Liang, Yu-hong

2016-02-18

To evaluate the efficacy and security of two type of rotary nickel titanium system (Twisted File and ProTaper Universal) for root canal preparation based on micro-computed tomography(micro-CT). Twenty extracted molars (including 62 canals) were divided into two experimental groups and were respectively instrumented using Twisted File rotary nickel titanium system (TF) and ProTaper Universal rotary nickel titanium system (PU) to #25/0.08 following recommended protocol. Time for root canal instrumentation (accumulation of time for every single file) was recorded. The 0-3 mm root surface from apex was observed under an optical stereomicroscope at 25 × magnification. The presence of crack line was noted. The root canals were scanned with micro-CT before and after root canal preparation. Three-dimensional shape images of canals were reconstructed, calculated and evaluated. The amount of canal central transportation of the two groups was calculated and compared. The shorter preparation time [(0.53 ± 0.14) min] was observed in TF group, while the preparation time of PU group was (2.06 ± 0.39) min (Pvs. (0.097 ± 0.084) mm, P<0.05]. No instrument separation was observed in both the groups. Cracks were not found in both the groups either based in micro-CT images or observation under an optical stereomicroscope at 25 × magnification. Compared with ProTaper Universal, Twisted File took less time in root canal preparation and exhibited better shaping ability, and less canal transportation.

The global unified parallel file system (GUPFS) project: FY 2003 activities and results

Energy Technology Data Exchange (ETDEWEB)

Butler, Gregory F.; Baird William P.; Lee, Rei C.; Tull, Craig E.; Welcome, Michael L.; Whitney Cary L.

2004-04-30

The Global Unified Parallel File System (GUPFS) project is a multiple-phase project at the National Energy Research Scientific Computing (NERSC) Center whose goal is to provide a scalable, high-performance, high-bandwidth, shared file system for all of the NERSC production computing and support systems. The primary purpose of the GUPFS project is to make the scientific users more productive as they conduct advanced scientific research at NERSC by simplifying the scientists' data management tasks and maximizing storage and data availability. This is to be accomplished through the use of a shared file system providing a unified file namespace, operating on consolidated shared storage that is accessible by all the NERSC production computing and support systems. In order to successfully deploy a scalable high-performance shared file system with consolidated disk storage, three major emerging technologies must be brought together: (1) shared/cluster file systems software, (2) cost-effective, high-performance storage area network (SAN) fabrics, and (3) high-performance storage devices. Although they are evolving rapidly, these emerging technologies individually are not targeted towards the needs of scientific high-performance computing (HPC). The GUPFS project is in the process of assessing these emerging technologies to determine the best combination of solutions for a center-wide shared file system, to encourage the development of these technologies in directions needed for HPC, particularly at NERSC, and to then put them into service. With the development of an evaluation methodology and benchmark suites, and with the updating of the GUPFS testbed system, the project did a substantial number of investigations and evaluations during FY 2003. The investigations and evaluations involved many vendors and products. From our evaluation of these products, we have found that most vendors and many of the products are more focused on the commercial market. Most vendors

Detection Of Alterations In Audio Files Using Spectrograph Analysis

Directory of Open Access Journals (Sweden)

Anandha Krishnan G

2015-08-01

Full Text Available The corresponding study was carried out to detect changes in audio file using spectrograph. An audio file format is a file format for storing digital audio data on a computer system. A sound spectrograph is a laboratory instrument that displays a graphical representation of the strengths of the various component frequencies of a sound as time passes. The objectives of the study were to find the changes in spectrograph of audio after altering them to compare altering changes with spectrograph of original files and to check for similarity and difference in mp3 and wav. Five different alterations were carried out on each audio file to analyze the differences between the original and the altered file. For altering the audio file MP3 or WAV by cutcopy the file was opened in Audacity. A different audio was then pasted to the audio file. This new file was analyzed to view the differences. By adjusting the necessary parameters the noise was reduced. The differences between the new file and the original file were analyzed. By adjusting the parameters from the dialog box the necessary changes were made. The edited audio file was opened in the software named spek where after analyzing a graph is obtained of that particular file which is saved for further analysis. The original audio graph received was combined with the edited audio file graph to see the alterations.

NASA work unit system file maintenance manual

Science.gov (United States)

1972-01-01

The NASA Work Unit System is a management information system for research tasks (i.e., work units) performed under NASA grants and contracts. It supplies profiles on research efforts and statistics on fund distribution. The file maintenance operator can add, delete and change records at a remote terminal or can submit punched cards to the computer room for batch update. The system is designed for file maintenance by a person with little or no knowledge of data processing techniques.

Standard interface files and procedures for reactor physics codes. Version IV

International Nuclear Information System (INIS)

O'Dell, R.D.

1977-09-01

Standards, procedures, and recommendations of the Committee on Computer Code Coordination for promoting the exchange of reactor physics codes are updated to Version IV status. Standards and procedures covering general programming, program structure, standard interface files, and file management and handling subroutines are included

Remote file inquiry (RFI) system

Science.gov (United States)

1975-01-01

System interrogates and maintains user-definable data files from remote terminals, using English-like, free-form query language easily learned by persons not proficient in computer programming. System operates in asynchronous mode, allowing any number of inquiries within limitation of available core to be active concurrently.

Evaluation of the Self-Adjusting File system (SAF) for the instrumentation of primary molar root canals: a micro-computed tomographic study.

Science.gov (United States)

Kaya, E; Elbay, M; Yiğit, D

2017-06-01

The Self-Adjusting File (SAF) system has been recommended for use in permanent teeth since it offers more conservative and effective root-canal preparation when compared to traditional rotary systems. However, no study had evaluated the usage of SAF in primary teeth. The aim of this study was to evaluate and compare the use of SAF, K file (manual instrumentation) and Profile (traditional rotary instrumentation) systems for primary-tooth root-canal preparation in terms of instrumentation time and amounts of dentin removed using micro-computed tomography (μCT) technology. Study Design: The study was conducted with 60 human primary mandibular second molar teeth divided into 3 groups according to instrumentation technique: Group I: SAF (n=20); Group II: K file (n=20); Group III; Profile (n=20). Teeth were embedded in acrylic blocks and scanned with a μCT scanner prior to instrumentation. All distal root canals were prepared up to size 30 for K file,.04/30 for Profile and 2 mm thickness, size 25 for SAF; instrumentation time was recorded for each tooth, and a second μCT scan was performed after instrumentation was complete. Amounts of dentin removed were measured using the three-dimensional images by calculating the difference in root-canal volume before and after preparation. Data was statistically analysed using the Kolmogorov-Smirnov and Kruskal-Wallis tests. Manual instrumentation (K file) resulted in significantly more dentin removal when compared to rotary instrumentation (Profile and SAF), while the SAF system generated significantly less dentin removal than both manual instrumentation (K file) and traditional rotary instrumentation (Profile) (psystems. Within the experimental conditions of the present study, the SAF seems as a useful system for root-canal instrumentation in primary molars because it removed less dentin than other systems, which is especially important for the relatively thin-walled canals of primary teeth, and because it involves less

Nuclear plant fire incident data file

International Nuclear Information System (INIS)

Sideris, A.G.; Hockenbury, R.W.; Yeater, M.L.; Vesely, W.E.

1979-01-01

A computerized nuclear plant fire incident data file was developed by American Nuclear Insurers and was further analyzed by Rensselaer Polytechnic Institute with technical and monetary support provided by the Nuclear Regulatory Commission. Data on 214 fires that occurred at nuclear facilities have been entered in the file. A computer program has been developed to sort the fire incidents according to various parameters. The parametric sorts that are presented in this article are significant since they are the most comprehensive statistics presently available on fires that have occurred at nuclear facilities

ATLAS, an integrated structural analysis and design system. Volume 4: Random access file catalog

Science.gov (United States)

Gray, F. P., Jr. (Editor)

1979-01-01

A complete catalog is presented for the random access files used by the ATLAS integrated structural analysis and design system. ATLAS consists of several technical computation modules which output data matrices to corresponding random access file. A description of the matrices written on these files is contained herein.

Activity-based computing: computational management of activities reflecting human intention

DEFF Research Database (Denmark)

Bardram, Jakob E; Jeuris, Steven; Houben, Steven

2015-01-01

paradigm that has been applied in personal information management applications as well as in ubiquitous, multidevice, and interactive surface computing. ABC has emerged as a response to the traditional application- and file-centered computing paradigm, which is oblivious to a notion of a user’s activity...

Radiology Teaching Files on the Internet

International Nuclear Information System (INIS)

Lim, Eun Chung; Kim, Eun Kyung

1996-01-01

There is increasing attention about radiology teaching files on the Internet in the field of diagnostic radiology. The purpose of this study was to aid in the creation of new radiology teaching file by analysing the present radiology teaching file sites on the Internet with many aspects and evaluating images on those sites, using Macintosh II ci compute r, 28.8kbps TelePort Fax/Modem, Netscape Navigator 2.0 software. The results were as follow : 1. Analysis of radiology teaching file sites (1) Country distribution was the highest in USA (57.5%). (2) Average number of cases was 186 cases and radiology teaching file sites with search engine were 9 sites (22.5%). (3) At the method of case arrangement, anatomic area type and diagnosis type were found at the 10 sites (25%) each, question and answer type was found at the 9 sites (22.5%). (4) Radiology teaching file sites with oro-maxillofacial disorder were 9 sites (22.5%). (5) At the image format, GIF format was found at the 14 sites (35%), and JPEG format found at the 14 sites (35%). (6) Created year was the highest in 1995 (43.7%). (7) Continuing case upload was found at the 35 sites (87.5%). 2. Evaluation of images on the radiology teaching files (1) Average file size of GIF format (71 Kbyte) was greater than that of JPEG format (24 Kbyte). (P<0.001) (2) Image quality of GIF format was better than that of JPEG format. (P<0.001)

Lessons Learned in Deploying the World s Largest Scale Lustre File System

Energy Technology Data Exchange (ETDEWEB)

Dillow, David A [ORNL; Fuller, Douglas [ORNL; Wang, Feiyi [ORNL; Oral, H Sarp [ORNL; Zhang, Zhe [ORNL; Hill, Jason J [ORNL; Shipman, Galen M [ORNL

2010-01-01

The Spider system at the Oak Ridge National Laboratory's Leadership Computing Facility (OLCF) is the world's largest scale Lustre parallel file system. Envisioned as a shared parallel file system capable of delivering both the bandwidth and capacity requirements of the OLCF's diverse computational environment, the project had a number of ambitious goals. To support the workloads of the OLCF's diverse computational platforms, the aggregate performance and storage capacity of Spider exceed that of our previously deployed systems by a factor of 6x - 240 GB/sec, and 17x - 10 Petabytes, respectively. Furthermore, Spider supports over 26,000 clients concurrently accessing the file system, which exceeds our previously deployed systems by nearly 4x. In addition to these scalability challenges, moving to a center-wide shared file system required dramatically improved resiliency and fault-tolerance mechanisms. This paper details our efforts in designing, deploying, and operating Spider. Through a phased approach of research and development, prototyping, deployment, and transition to operations, this work has resulted in a number of insights into large-scale parallel file system architectures, from both the design and the operational perspectives. We present in this paper our solutions to issues such as network congestion, performance baselining and evaluation, file system journaling overheads, and high availability in a system with tens of thousands of components. We also discuss areas of continued challenges, such as stressed metadata performance and the need for file system quality of service alongside with our efforts to address them. Finally, operational aspects of managing a system of this scale are discussed along with real-world data and observations.

Configuration Management File Manager Developed for Numerical Propulsion System Simulation

Science.gov (United States)

Follen, Gregory J.

1997-01-01

One of the objectives of the High Performance Computing and Communication Project's (HPCCP) Numerical Propulsion System Simulation (NPSS) is to provide a common and consistent way to manage applications, data, and engine simulations. The NPSS Configuration Management (CM) File Manager integrated with the Common Desktop Environment (CDE) window management system provides a common look and feel for the configuration management of data, applications, and engine simulations for U.S. engine companies. In addition, CM File Manager provides tools to manage a simulation. Features include managing input files, output files, textual notes, and any other material normally associated with simulation. The CM File Manager includes a generic configuration management Application Program Interface (API) that can be adapted for the configuration management repositories of any U.S. engine company.

Federating LHCb datasets using the DIRAC File catalog

CERN Document Server

Haen, Christophe; Frank, Markus; Tsaregorodtsev, Andrei

2015-01-01

In the distributed computing model of LHCb the File Catalog (FC) is a central component that keeps track of each file and replica stored on the Grid. It is federating the LHCb data files in a logical namespace used by all LHCb applications. As a replica catalog, it is used for brokering jobs to sites where their input data is meant to be present, but also by jobs for finding alternative replicas if necessary. The LCG File Catalog (LFC) used originally by LHCb and other experiments is now being retired and needs to be replaced. The DIRAC File Catalog (DFC) was developed within the framework of the DIRAC Project and presented during CHEP 2012. From the technical point of view, the code powering the DFC follows an Aspect oriented programming (AOP): each type of entity that is manipulated by the DFC (Users, Files, Replicas, etc) is treated as a separate 'concern' in the AOP terminology. Hence, the database schema can also be adapted to the needs of a Virtual Organization. LHCb opted for a highly tuned MySQL datab...

Agent-Mining of Grid Log-Files: A Case Study

NARCIS (Netherlands)

Stoter, A.; Dalmolen, Simon; Mulder, .W.

2013-01-01

Grid monitoring requires analysis of large amounts of log files across multiple domains. An approach is described for automated extraction of job-flow information from large computer grids, using software agents and genetic computation. A prototype was created as a first step towards communities of

Further computer appreciation

CERN Document Server

Fry, T F

2014-01-01

Further Computer Appreciation is a comprehensive cover of the principles and aspects in computer appreciation. The book starts by describing the development of computers from the first to the third computer generations, to the development of processors and storage systems, up to the present position of computers and future trends. The text tackles the basic elements, concepts and functions of digital computers, computer arithmetic, input media and devices, and computer output. The basic central processor functions, data storage and the organization of data by classification of computer files,

Grammar-Based Specification and Parsing of Binary File Formats

Directory of Open Access Journals (Sweden)

William Underwood

2012-03-01

Full Text Available The capability to validate and view or play binary file formats, as well as to convert binary file formats to standard or current file formats, is critically important to the preservation of digital data and records. This paper describes the extension of context-free grammars from strings to binary files. Binary files are arrays of data types, such as long and short integers, floating-point numbers and pointers, as well as characters. The concept of an attribute grammar is extended to these context-free array grammars. This attribute grammar has been used to define a number of chunk-based and directory-based binary file formats. A parser generator has been used with some of these grammars to generate syntax checkers (recognizers for validating binary file formats. Among the potential benefits of an attribute grammar-based approach to specification and parsing of binary file formats is that attribute grammars not only support format validation, but support generation of error messages during validation of format, validation of semantic constraints, attribute value extraction (characterization, generation of viewers or players for file formats, and conversion to current or standard file formats. The significance of these results is that with these extensions to core computer science concepts, traditional parser/compiler technologies can potentially be used as a part of a general, cost effective curation strategy for binary file formats.

A micro-computed tomographic evaluation of dentinal microcrack alterations during root canal preparation using single-file Ni-Ti systems.

Science.gov (United States)

Li, Mei-Lin; Liao, Wei-Li; Cai, Hua-Xiong

2018-01-01

The aim of the present study was to evaluate the length of dentinal microcracks observed prior to and following root canal preparation with different single-file nickel-titanium (Ni-Ti) systems using micro-computed tomography (micro-CT) analysis. A total of 80 mesial roots of mandibular first molars presenting with type II Vertucci canal configurations were scanned at an isotropic resolution of 7.4 µm. The samples were randomly assigned into four groups (n=20 per group) according to the system used for root canal preparation, including the WaveOne (WO), OneShape (OS), Reciproc (RE) and control groups. A second micro-CT scan was conducted after the root canals were prepared with size 25 instruments. Pre- and postoperative cross-section images of the roots (n=237,760) were then screened to identify the lengths of the microcracks. The results indicated that the microcrack lengths were notably increased following root canal preparation (Pfiles. Among the single-file Ni-Ti systems, WO and RE were not observed to cause notable microcracks, while the OS system resulted in evident microcracks.

Peregrine System | High-Performance Computing | NREL

Science.gov (United States)

classes of nodes that users access: Login Nodes Peregrine has four login nodes, each of which has Intel E5 /scratch file systems, the /mss file system is mounted on all login nodes. Compute Nodes Peregrine has 2592

BIBLIO: A Reprint File Management Algorithm

Science.gov (United States)

Zelnio, Robert N.; And Others

1977-01-01

The development of a simple computer algorithm designed for use by the individual educator or researcher in maintaining and searching reprint files is reported. Called BIBLIO, the system is inexpensive and easy to operate and maintain without sacrificing flexibility and utility. (LBH)

The diet of adult psittacids: veterinarian and ethological approaches.

Science.gov (United States)

Péron, F; Grosset, C

2014-06-01

Parrots species are kept as pets because of their colours, their vocal abilities, their longevity and also their behaviours. Nevertheless, many owners do not know how to feed their bird in a healthy way and sometimes veterinarians and ethologists are confronted to dramatic situations. Diet is a key factor to prevent and reduce health and psychogenic disorders. Imbalance can lead to physical, physiological and behavioural modifications that can weaken the owner-bird relationship, cause bird discomfort and sometimes threaten its survival. Psittacids are known for their complex cognitive and communicative abilities. They are social animals and need many interactions. Kept in captivity, they could suffer from boredom because of lack of stimulations and also because of lack of possibility to explore and to forage, which could represent up to 70% of their day time in the wild. Indeed, humans control every parameter in the environment of pet psittacids. They provide a highly digestible diet. In captivity, foraging is not mandatory, and the bird can get bored. Here, we present a review of the literature regarding the quality of the diet and health disorders on one hand and the interaction between foraging opportunities and psychogenic disorders in adult psittacids on the other hand. Journal of Animal Physiology and Animal Nutrition © 2013 Blackwell Verlag GmbH.

The NEA computer program library: a possible GDMS application

International Nuclear Information System (INIS)

Schuler, W.

1978-01-01

NEA Computer Program library maintains a series of eleven sequential computer files, used for linked applications in managing their stock of computer codes for nuclear reactor calculations, storing index and program abstract information, and administering their service to requesters. The high data redundancy beween the files suggests that a data base approach would be valid and this paper suggests a possible 'schema' for an CODASYL GDMS

Development of a script for converting DICOM files to .TXT

International Nuclear Information System (INIS)

Abrantes, Marcos E.S.; Oliveira, A.H. de

2014-01-01

Background: with the increased use of computer simulation techniques for diagnosis or therapy in patients, the MCNP and SCMS software is being widely used. For use as SCMS data entry interface for the MCNP is necessary to perform transformation of DICOM images to text files. Objective: to produce a semi automatic script conversion DICOM images generated by Computerized Tomography or Magnetic Resonance, for .txt in the IMAGEJ software. Methodology: this study was developed in the IMAGEJ software platform with an Intel Core 2 Duo computer, CPU of 2.00GHz, with 2:00 GB of RAM for 32-bit system. Development of the script was held in a text editor using JAVA language. For script insertion in IMAGEJ the plug in tool of this software was used. After this, a window is open asking for the path of the files that will be read, first and last name of DICOM file to be converted, along with where the new files will be stored. Results: for the manual processing of DICOM conversion to .txt of cerebral computed tomography with 600 images requires a time of about 8 hours. The use of script allows conversion time reduction for 12 minutes. Conclusion: the script used demonstrates DICOM conversion ability to .txt and a significant improvement in time savings in processing

Why do farmers and veterinarians not report all bovine abortions, as requested by the clinical brucellosis surveillance system in France?

Science.gov (United States)

Bronner, Anne; Hénaux, Viviane; Fortané, Nicolas; Hendrikx, Pascal; Calavas, Didier

2014-04-24

Since 2005, France has been officially free of brucellosis, an infectious disease that causes abortion in cattle and can be transmitted from cattle to humans. Recent animal and human cases have drawn attention to the need to prevent infection of humans and animals from any primary outbreaks. In order to detect any new outbreaks as soon as possible, a clinical surveillance system requires farmers and veterinarians to report each abortion and to test the aborting cow for brucellosis. However, under-reporting limits the sensitivity of this system. Our objective was to identify the barriers and motivations influencing field actors in their decision to report or not to report bovine abortions. We used a qualitative approach with semi-structured interviews of 12 cattle farmers and their eight veterinarians. Our analysis showed that four main themes influence the decision-making process of farmers and veterinarians: 1) the perceived risk of brucellosis and other abortive diseases; 2) the definition of a suspected case of brucellosis and other abortive diseases adopted by field actors, which is less sensitive than the mandatory definition; 3) the cost-benefit analysis conducted by actors, taking into account regulatory and health aspects, economic and financial losses, technical and practical factors; 4) the level of cooperation within the socio-technical network. We discussed how early detection may be improved by revising the definition of abortion, extending the time frame for notification and generalising the differential diagnosis of the causes of abortion. In contrast to quantitative approaches, qualitative studies can identify the factors (including unknown factors) influencing the decision-making process of field actors and reveal why they take those factors into consideration. Our qualitative study sheds light on the factors underlying the poor sensitivity of clinical brucellosis surveillance system for cattle in France, and suggests that early detection may be

Antibody profile to Borrelia burgdorferi in veterinarians from Nuevo León, Mexico, a non-endemic area of this zoonosis

Directory of Open Access Journals (Sweden)

Cassandra M. Skinner-Taylor

2016-07-01

Full Text Available Objectives: Lyme disease is a tick-borne disease caused by infections with Borrelia . Persons infected with Borrelia can be asymptomatic or can develop disseminated disease. Diagnosis and recognition of groups at risk of infection with Borrelia burgdorferi is of great interest to contemporary rheumatology. There are a few reports about Borrelia infection in Mexico, including lymphocytoma cases positive to B. burgdorferi sensu stricto by PCR and a patient with acrodermatitis chronica atrophicans. Veterinarians have an occupational risk due to high rates of tick contact. The aim of this work was to investigate antibodies to Borrelia in students at the Faculty of Veterinary Medicine and Zootechnics, at Nuevo León, Mexico, and determine the antibody profile to B. burgdorferi antigens. Material and methods: Sera were screened using a C6 ELISA, IgG and IgM ELISA using recombinant proteins from B. burgdorferi , B. gariniii and B. afzelii . Sera with positive or grey-zone values were tested by IgG Western blot to B. burgdorferi sensu stricto. Results : All volunteers reported tick exposures and 72.5% remembered tick bites. Only nine persons described mild Lyme disease related symptoms, including headaches, paresthesias, myalgias and arthralgias. None of the volunteers reported erythema migrans. Nine samples were confirmed by IgG Western blot. The profile showed 89% reactivity to OspA, 67% to p83, and 45% to BmpA. Conclusions : Positive sera samples shared antibody reactivity to the markers of late immune response p83 and BmpA, even if individuals did not present symptoms of Lyme arthritis or post-Lyme disease. The best criterion to diagnose Lyme disease in our country remains to be established, because it is probable that different strains coexist in Mexico. This is the first report of antibodies to B. burgdorferi in Latin American veterinarians. Veterinarians and high-risk people should be alert to take precautionary measures to prevent tick

Network survivability performance (computer diskette)

Science.gov (United States)

1993-11-01

File characteristics: Data file; 1 file. Physical description: 1 computer diskette; 3 1/2 in.; high density; 2.0MB. System requirements: Mac; Word. This technical report has been developed to address the survivability of telecommunications networks including services. It responds to the need for a common understanding of, and assessment techniques for network survivability, availability, integrity, and reliability. It provides a basis for designing and operating telecommunication networks to user expectations for network survivability.

Development of data file system for cardiovascular nuclear medicine

International Nuclear Information System (INIS)

Hayashida, Kohei; Nishimura, Tsunehiko; Uehara, Toshiisa; Nisawa, Yoshifumi.

1985-01-01

A computer-assisted filing system for storing and processing data from cardiac pool scintigraphy and myocardial scintigraphy has been developed. Individual patient data are stored with his (her) identification number (ID) into floppy discs successively in order of receiving scintigraphy. Data for 900 patients can be stored per floppy disc. Scintigraphic findings can be outputted in a uniform file format, and can be used as a reporting format. Output or retrieval of filed individual patient data is possible according to each examination, disease code or ID. This system seems to be used for prospective study in patients with cardiovascular diseases. (Namekawa, K.)

Vaccinations in pig health care in the Netherlands - analysis of a questionnaire among veterinarians = Vaccinaties in de Nederlandse varkensgezondheidszorganalyse van een enquete onder dierenartsen

NARCIS (Netherlands)

Groot, de J.; Eijck, I.A.J.M.; Boersma, W.J.A.

2004-01-01

Veterinarians specializing in pig health care responded to a questionnaire regarding their experiences with vaccinations. The goal of the questionnaire was to gain insight into a) the reasons for vaccination and b) the factors involved in the effficacy of vaccination. The results indicated that

Study and development of a document file system with selective access

International Nuclear Information System (INIS)

Mathieu, Jean-Claude

1974-01-01

The objective of this research thesis was to design and to develop a set of software aimed at an efficient management of a document file system by using methods of selective access to information. Thus, the three main aspects of file processing (creation, modification, reorganisation) have been addressed. The author first presents the main problems related to the development of a comprehensive automatic documentation system, and their conventional solutions. Some future aspects, notably dealing with the development of peripheral computer technology, are also evoked. He presents the characteristics of INIS bibliographic records provided by the IAEA which have been used to create the files. In the second part, he briefly describes the file system general organisation. This system is based on the use of two main files: an inverse file which contains for each descriptor a list of of numbers of files indexed by this descriptor, and a dictionary of descriptor or input file which gives access to the inverse file. The organisation of these both files is then describes in a detailed way. Other related or associated files are created, and the overall architecture and mechanisms integrated into the file data input software are described, as well as various processing applied to these different files. Performance and possible development are finally discussed

Multi-level, automatic file management system using magnetic disk, mass storage system and magnetic tape

International Nuclear Information System (INIS)

Fujii, Minoru; Asai, Kiyoshi

1979-12-01

A simple, effective file management system using magnetic disk, mass storage system (MSS) and magnetic tape is described. Following are the concepts and techniques introduced in this file management system. (1) File distribution and continuity character of file references are closely approximated by memory retention function. A density function using the memory retention function is thus defined. (2) A method of computing the cost/benefit lines for magnetic disk, MSS and magnetic tape is presented. (3) A decision process of an optimal organization of file facilities incorporating file demands distribution to respective file devices, is presented. (4) A method of simple, practical, effective, automatic file management, incorporating multi-level file management, space management and file migration control, is proposed. (author)

[Opinion of the primary care veterinarians of Andalusia concerning the management of their professional practice].

Science.gov (United States)

Conti Cuesta, F; Baena Parejo, M I; Pinzón Pulido, S A

1999-01-01

This study describes the opinion of the veterinarians in Andalusia regarding the organization and management of their professional practice and pinpoints solutions to the problems found for the purpose of providing planning and management aspects in view of the reforms undertaken in the Andalusian Health Service Strategy Plan. Descriptive opinion poll employing a questionnaire filled out by each individual among all of the Primary Care (PC) veterinarians in Andalusia (including those who have been currently employed who possess at least one year's experience, except substitutes). A description was provided of their personal traits, their opinion of the management-related factors involved in their professional practice. A description was also provided of the suggestions for improving the problems found to exist. Over 70% said they were aware of the objectives, although only the coordinators found them to be clearly motivating the practice. Their opinion was that the indicators of activity neither include any quality-related criteria nor afford the possibility of evaluating the activity they are carrying out. They believed that the contributions from other members of the multidisciplinary team improve their work and are in favor of continuing their involvement therein. They were satisfied with doing their work (the coordinators to a greater degree). They found the productivity pay to be too low and not useful as regards providing them with any incentive. They were not satisfied with the training with which they are provided and thought that what they are offered is far less than their other colleagues in the health care field. Most were of the opinion that they should remain under the authority of the Andalusian Health Service. This group prefers to continue working for the same organization, but improving the following management aspects: training offer, practice incentives and activity indicators.

FEDGROUP - A program system for producing group constants from evaluated nuclear data of files disseminated by IAEA

International Nuclear Information System (INIS)

Vertes, P.

1976-06-01

A program system for calculating group constants from several evaluated nuclear data files has been developed. These files are distributed by the Nuclear Data Section of IAEA. Our program system - FEDGROUP - has certain advantage over the well-known similar codes such as: 1. it requires only a medium sized computer />or approximately equal to 20000 words memory/, 2. it is easily adaptable to any type of computer, 3. it is flexible to the input evaluated nuclear data file and to the output group constant file. Nowadays, FEDGROUP calculates practically all types of group constants needed for reactor physics calculations by using the most frequent representations of evaluated data. (author)

Decay data file based on the ENSDF file

Energy Technology Data Exchange (ETDEWEB)

Katakura, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1997-03-01

A decay data file with the JENDL (Japanese Evaluated Nuclear Data Library) format based on the ENSDF (Evaluated Nuclear Structure Data File) file was produced as a tentative one of special purpose files of JENDL. The problem using the ENSDF file as primary source data of the JENDL decay data file is presented. (author)

KaZaA and similar Peer-to-Peer (P2P) file-sharing applications

CERN Multimedia

2003-01-01

Personal use of Peer-to-Peer (P2P) file sharing applications is NOT permitted at CERN. A non-exhaustive list of such applications, popular for exchanging music, videos, software etc, is: KaZaA, Napster, Gnutella, Edonkey2000, Napigator, Limewire, Bearshare, WinMX, Aimster, Morpheus, BitTorrent, ... You are reminded that use of CERN's Computing Facilities is governed by CERN's Computing Rules (Operational Circular No 5). They require that all users of CERN's Computing Facilities respect copyright, license and confidentiality agreements for data of any form (software, music, videos, etc). Sanctions are applicable in case of non-respect of the Computing Rules. Further details on restrictions for P2P applications are at: http://cern.ch/security/file-sharing CERN's Computing Rules are at: http://cern.ch/ComputingRules Denise Heagerty, CERN Computer Security Officer, Computer.Security@cern.ch

Grid collector an event catalog with automated file management

CERN Document Server

Ke Sheng Wu; Sim, A; Jun Min Gu; Shoshani, A

2004-01-01

High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides "direct" access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select ev...

The version control service for the ATLAS data acquisition configuration files

International Nuclear Information System (INIS)

Soloviev, Igor

2012-01-01

The ATLAS experiment at the LHC in Geneva uses a complex and highly distributed Trigger and Data Acquisition system, involving a very large number of computing nodes and custom modules. The configuration of the system is specified by schema and data in more than 1000 XML files, with various experts responsible for updating the files associated with their components. Maintaining an error free and consistent set of XML files proved a major challenge. Therefore a special service was implemented; to validate any modifications; to check the authorization of anyone trying to modify a file; to record who had made changes, plus when and why; and to provide tools to compare different versions of files and to go back to earlier versions if required. This paper provides details of the implementation and exploitation experience, that may be interesting for other applications using many human-readable files maintained by different people, where consistency of the files and traceability of modifications are key requirements.

Competitive Status Signaling in Peer-to-Peer File-Sharing Networks

Directory of Open Access Journals (Sweden)

Henry F. Lyle

2007-04-01

Full Text Available Internet peer-to-peer file sharing is a contemporary example of asymmetrical sharing in which “altruists” (file uploaders share unconditionally with non-reciprocating “free riders” (file downloaders. Those who upload digital media files over the Internet risk prosecution for copyright infringement, and are more vulnerable to computer hackers and viruses. In an analysis of file-sharing behavior among university undergraduates (N=331, we found that significantly more males than females engaged in risky file uploading. Contrary to expectations, uploaders were not concerned about their reputation online and file sharers were not interested in identifying or chatting with uploaders while online. Among uploaders, males were more likely than females to be identified as uploaders by friends, to discuss uploading and to upload in the presence of peers. We interpret these results using costly-signaling theory, and argue that uploading is a costly signal in which males engage in avoidable risk taking as a means to compete for status among peers in social contexts other than the Internet.

Testing the Forensic Interestingness of Image Files Based on Size and Type

Science.gov (United States)

2017-09-01

down to 0.18% (Rowe, 2015). 7 III. IMAGE FILE FORMATS When scanning a computer hard drive, many kinds of pictures are found. Digital images are not...3  III.  IMAGE FILE FORMATS ...Interchange Format JPEG Joint Photographic Experts Group LSH Locality Sensitive Hashing NSRL National Software Reference Library PDF Portable Document

Conversion of Input Data between KENO and MCNP File Formats for Computer Criticality Assessments

International Nuclear Information System (INIS)

Schwarz, Randolph A.; Carter, Leland L.; Schwarz Alysia L.

2006-01-01

KENO is a Monte Carlo criticality code that is maintained by Oak Ridge National Laboratory (ORNL). KENO is included in the SCALE (Standardized Computer Analysis for Licensing Evaluation) package. KENO is often used because it was specifically designed for criticality calculations. Because KENO has convenient geometry input, including the treatment of lattice arrays of materials, it is frequently used for production calculations. Monte Carlo N-Particle (MCNP) is a Monte Carlo transport code maintained by Los Alamos National Laboratory (LANL). MCNP has a powerful 3D geometry package and an extensive cross section database. It is a general-purpose code and may be used for calculations involving shielding or medical facilities, for example, but can also be used for criticality calculations. MCNP is becoming increasingly more popular for performing production criticality calculations. Both codes have their own specific advantages. After a criticality calculation has been performed with one of the codes, it is often desirable (or may be a safety requirement) to repeat the calculation with the other code to compare the important parameters using a different geometry treatment and cross section database. This manual conversion of input files between the two codes is labor intensive. The industry needs the capability of converting geometry models between MCNP and KENO without a large investment in manpower. The proposed conversion package will aid the user in converting between the codes. It is not intended to be used as a ''black box''. The resulting input file will need to be carefully inspected by criticality safety personnel to verify the intent of the calculation is preserved in the conversion. The purpose of this package is to help the criticality specialist in the conversion process by converting the geometry, materials, and pertinent data cards

Overview and Status of the Ceph File System

CERN Multimedia

CERN. Geneva

2017-01-01

The Ceph file system (CephFS) is the POSIX-compatible distributed file system running on top of Ceph's powerful and stable object store. This presentation will give a general introduction of CephFS and detail the recent work the Ceph team has done to improve its stability and usability. In particular, we will cover directory fragmentation, multiple active metadata servers, and directory subtree pinning to metadata servers, features slated for stability in the imminent Luminous release. This talk will also give an overview of how we are measuring performance of multiple active metadata servers using large on-demand cloud deployments. The results will highlight how CephFS distributes metadata load across metadata servers to achieve scaling. About the speaker Patrick Donnelly is a software engineer at Red Hat, Inc. currently working on the Ceph distributed file system. In 2016 he completed his Ph.D. in computer science at the University of Notre Dame with a dissertation on the topic of file transfer management...

Tuning HDF5 subfiling performance on parallel file systems

Energy Technology Data Exchange (ETDEWEB)

Byna, Suren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Chaarawi, Mohamad [Intel Corp. (United States); Koziol, Quincey [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mainzer, John [The HDF Group (United States); Willmore, Frank [The HDF Group (United States)

2017-05-12

Subfiling is a technique used on parallel file systems to reduce locking and contention issues when multiple compute nodes interact with the same storage target node. Subfiling provides a compromise between the single shared file approach that instigates the lock contention problems on parallel file systems and having one file per process, which results in generating a massive and unmanageable number of files. In this paper, we evaluate and tune the performance of recently implemented subfiling feature in HDF5. In specific, we explain the implementation strategy of subfiling feature in HDF5, provide examples of using the feature, and evaluate and tune parallel I/O performance of this feature with parallel file systems of the Cray XC40 system at NERSC (Cori) that include a burst buffer storage and a Lustre disk-based storage. We also evaluate I/O performance on the Cray XC30 system, Edison, at NERSC. Our results show performance benefits of 1.2X to 6X performance advantage with subfiling compared to writing a single shared HDF5 file. We present our exploration of configurations, such as the number of subfiles and the number of Lustre storage targets to storing files, as optimization parameters to obtain superior I/O performance. Based on this exploration, we discuss recommendations for achieving good I/O performance as well as limitations with using the subfiling feature.

Decryption-decompression of AES protected ZIP files on GPUs

Science.gov (United States)

Duong, Tan Nhat; Pham, Phong Hong; Nguyen, Duc Huu; Nguyen, Thuy Thanh; Le, Hung Duc

2011-10-01

AES is a strong encryption system, so decryption-decompression of AES encrypted ZIP files requires very large computing power and techniques of reducing the password space. This makes implementations of techniques on common computing system not practical. In [1], we reduced the original very large password search space to a much smaller one which surely containing the correct password. Based on reduced set of passwords, in this paper, we parallel decryption, decompression and plain text recognition for encrypted ZIP files by using CUDA computing technology on graphics cards GeForce GTX295 of NVIDIA, to find out the correct password. The experimental results have shown that the speed of decrypting, decompressing, recognizing plain text and finding out the original password increases about from 45 to 180 times (depends on the number of GPUs) compared to sequential execution on the Intel Core 2 Quad Q8400 2.66 GHz. These results have demonstrated the potential applicability of GPUs in this cryptanalysis field.

An asynchronous writing method for restart files in the gysela code in prevision of exascale systems*

Directory of Open Access Journals (Sweden)

Thomine O.

2013-12-01

Full Text Available The present work deals with an optimization procedure developed in the full-f global GYrokinetic SEmi-LAgrangian code (GYSELA. Optimizing the writing of the restart files is necessary to reduce the computing impact of crashes. These files require a very large memory space, and particularly so for very large mesh sizes. The limited bandwidth of the data pipe between the comput- ing nodes and the storage system induces a non-scalable part in the GYSELA code, which increases with the mesh size. Indeed the transfer time of RAM to data depends linearly on the files size. The necessity of non synchronized writing-in-file procedure is therefore crucial. A new GYSELA module has been developed. This asynchronous procedure allows the frequent writ- ing of the restart files, whilst preventing a severe slowing down due to the limited writing bandwidth. This method has been improved to generate a checksum control of the restart files, and automatically rerun the code in case of a crash for any cause.

Why do farmers and veterinarians not report all bovine abortions, as requested by the clinical brucellosis surveillance system in France?

OpenAIRE

Bronner, Anne; Hénaux, Viviane; Fortané, Nicolas; Hendrikx, Pascal; Calavas, Didier

2014-01-01

Background Since 2005, France has been officially free of brucellosis, an infectious disease that causes abortion in cattle and can be transmitted from cattle to humans. Recent animal and human cases have drawn attention to the need to prevent infection of humans and animals from any primary outbreaks. In order to detect any new outbreaks as soon as possible, a clinical surveillance system requires farmers and veterinarians to report each abortion and to test the aborting cow for brucello...

Kepler Data Validation Time Series File: Description of File Format and Content

Science.gov (United States)

Mullally, Susan E.

2016-01-01

The Kepler space mission searches its time series data for periodic, transit-like signatures. The ephemerides of these events, called Threshold Crossing Events (TCEs), are reported in the TCE tables at the NASA Exoplanet Archive (NExScI). Those TCEs are then further evaluated to create planet candidates and populate the Kepler Objects of Interest (KOI) table, also hosted at the Exoplanet Archive. The search, evaluation and export of TCEs is performed by two pipeline modules, TPS (Transit Planet Search) and DV (Data Validation). TPS searches for the strongest, believable signal and then sends that information to DV to fit a transit model, compute various statistics, and remove the transit events so that the light curve can be searched for other TCEs. More on how this search is done and on the creation of the TCE table can be found in Tenenbaum et al. (2012), Seader et al. (2015), Jenkins (2002). For each star with at least one TCE, the pipeline exports a file that contains the light curves used by TPS and DV to find and evaluate the TCE(s). This document describes the content of these DV time series files, and this introduction provides a bit of context for how the data in these files are used by the pipeline.

Grid collector: An event catalog with automated file management

International Nuclear Information System (INIS)

Wu, Kesheng; Zhang, Wei-Ming; Sim, Alexander; Gu, Junmin; Shoshani, Arie

2003-01-01

High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides ''direct'' access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select events based on tags, such as, ''production date between March 10 and 20, and the number of charged tracks > 100.'' The Grid Collector locates the files containing relevant events, transfers the files across the Grid if necessary, and delivers the events to the analysis code through the familiar iterators. There has been some research efforts to address the file management issues, the Grid Collector is unique in that it addresses the event access issue together with the file management issues. This makes it more useful to a large variety of users

Reliable file sharing in distributed operating system using web RTC

Science.gov (United States)

Dukiya, Rajesh

2017-12-01

Since, the evolution of distributed operating system, distributed file system is come out to be important part in operating system. P2P is a reliable way in Distributed Operating System for file sharing. It was introduced in 1999, later it became a high research interest topic. Peer to Peer network is a type of network, where peers share network workload and other load related tasks. A P2P network can be a period of time connection, where a bunch of computers connected by a USB (Universal Serial Bus) port to transfer or enable disk sharing i.e. file sharing. Currently P2P requires special network that should be designed in P2P way. Nowadays, there is a big influence of browsers in our life. In this project we are going to study of file sharing mechanism in distributed operating system in web browsers, where we will try to find performance bottlenecks which our research will going to be an improvement in file sharing by performance and scalability in distributed file systems. Additionally, we will discuss the scope of Web Torrent file sharing and free-riding in peer to peer networks.

Nuclide identifier and grat data reader application for ORIGEN output file

International Nuclear Information System (INIS)

Arif Isnaeni

2011-01-01

ORIGEN is a one-group depletion and radioactive decay computer code developed at the Oak Ridge National Laboratory (ORNL). ORIGEN takes one-group neutronics calculation providing various nuclear material characteristics (the buildup, decay and processing of radioactive materials). ORIGEN output is a text-based file, ORIGEN output file contains only numbers in the form of group data nuclide, nuclide identifier and grat. This application was created to facilitate data collection nuclide identifier and grat, this application also has a function to acquire mass number data and calculate mass (gram) for each nuclide. Output from these applications can be used for computer code data input for neutronic calculations such as MCNP. (author)

The Fermilab central computing facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-01-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front-end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS cluster interactive front-end, an Amdahl VM Computing engine, ACP farms, and (primarily) VMS workstations. This paper will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. (orig.)

The Fermilab Central Computing Facility architectural model

International Nuclear Information System (INIS)

Nicholls, J.

1989-05-01

The goal of the current Central Computing Upgrade at Fermilab is to create a computing environment that maximizes total productivity, particularly for high energy physics analysis. The Computing Department and the Next Computer Acquisition Committee decided upon a model which includes five components: an interactive front end, a Large-Scale Scientific Computer (LSSC, a mainframe computing engine), a microprocessor farm system, a file server, and workstations. With the exception of the file server, all segments of this model are currently in production: a VAX/VMS Cluster interactive front end, an Amdahl VM computing engine, ACP farms, and (primarily) VMS workstations. This presentation will discuss the implementation of the Fermilab Central Computing Facility Architectural Model. Implications for Code Management in such a heterogeneous environment, including issues such as modularity and centrality, will be considered. Special emphasis will be placed on connectivity and communications between the front-end, LSSC, and workstations, as practiced at Fermilab. 2 figs

OK, Computer: File Sharing, the Music Industry, and Why We Need the Pirate Party

Directory of Open Access Journals (Sweden)

Adrian Cosstick

2009-03-01

Full Text Available The Pirate Party believes the state and big business are in the process of protecting stale and inefficient models of business for their own monetary benefit by limiting our right to share information. The Pirate Party suggests that they are achieving this goal through the amendment of intellectual property legislation. In the dawn of the digital era, the Pirate Party advocates that governments and multinational corporations are using intellectual property to: crack down on file sharing which limits the ability to share knowledge and information; increase the terms and length of copyright to raise profits; and build code into music files which limits their ability to be shared (Pirate Party, 2009. There are a number of ‘copyright industries’ that are affected by these issues, none more so than the music industry. Its relationship with file sharing is topical and makes an excellent case study to address the impact big business has had on intellectual property and the need for the Pirate Party’s legislative input. The essay will then examine the central issues raised by illegal file sharing. In particular, the future for record companies in an environment that increasingly demands flexibility, and whether the Pirate Party’s proposal is a viable solution to the music industry’s problems

Accessing files in an Internet: The Jade file system

Science.gov (United States)

Peterson, Larry L.; Rao, Herman C.

1991-01-01

Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

Accessing files in an internet - The Jade file system

Science.gov (United States)

Rao, Herman C.; Peterson, Larry L.

1993-01-01

Jade is a new distribution file system that provides a uniform way to name and access files in an internet environment. It makes two important contributions. First, Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Jade is designed under the restriction that the underlying file system may not be modified. Second, rather than providing a global name space, Jade permits each user to define a private name space. These private name spaces support two novel features: they allow multiple file systems to be mounted under one directory, and they allow one logical name space to mount other logical name spaces. A prototype of the Jade File System was implemented on Sun Workstations running Unix. It consists of interfaces to the Unix file system, the Sun Network File System, the Andrew File System, and FTP. This paper motivates Jade's design, highlights several aspects of its implementation, and illustrates applications that can take advantage of its features.

Enkripsi dan Dekripsi File dengan Algoritma Blowfish pada Perangkat Mobile Berbasis Android

Directory of Open Access Journals (Sweden)

Siswo Wardoyo

2016-03-01

Full Text Available Cryptography is one of the ways used to secure data in the form of a file with encrypt files so that others are not entitled to know the file is private and confidential. One method is the algorithm Blowfish Cryptography which is a symmetric key using the algorithm to perform encryption and decryption. Applications that are built can perform file encryption-shaped images, videos, and documents. These applications can be running on a mobile phone that has a minimal operating system Android version 2.3. The software used to build these applications is Eclipse. The results of this research indicate that applications built capable of performing encryption and decryption. The results file encryption makes files into another unknown meaning. By using the keys numbered 72 bits or 9 character takes 1,49x108 years to break it with the speed it’s computation is 106 key/sec.

Strategies for Sharing Seismic Data Among Multiple Computer Platforms

Science.gov (United States)

Baker, L. M.; Fletcher, J. B.

2001-12-01

Seismic waveform data is readily available from a variety of sources, but it often comes in a distinct, instrument-specific data format. For example, data may be from portable seismographs, such as those made by Refraction Technology or Kinemetrics, from permanent seismograph arrays, such as the USGS Parkfield Dense Array, from public data centers, such as the IRIS Data Center, or from personal communication with other researchers through e-mail or ftp. A computer must be selected to import the data - usually whichever is the most suitable for reading the originating format. However, the computer best suited for a specific analysis may not be the same. When copies of the data are then made for analysis, a proliferation of copies of the same data results, in possibly incompatible, computer-specific formats. In addition, if an error is detected and corrected in one copy, or some other change is made, all the other copies must be updated to preserve their validity. Keeping track of what data is available, where it is located, and which copy is authoritative requires an effort that is easy to neglect. We solve this problem by importing waveform data to a shared network file server that is accessible to all our computers on our campus LAN. We use a Network Appliance file server running Sun's Network File System (NFS) software. Using an NFS client software package on each analysis computer, waveform data can then be read by our MatLab or Fortran applications without first copying the data. Since there is a single copy of the waveform data in a single location, the NFS file system hierarchy provides an implicit complete waveform data catalog and the single copy is inherently authoritative. Another part of our solution is to convert the original data into a blocked-binary format (known historically as USGS DR100 or VFBB format) that is interpreted by MatLab or Fortran library routines available on each computer so that the idiosyncrasies of each machine are not visible to

GIFT: an HEP project for file transfer

International Nuclear Information System (INIS)

Ferrer, M.L.; Mirabelli, G.; Valente, E.

1986-01-01

Started in autumn 1983, GIFT (General Internetwork File Transfer) is a collaboration among several HEP centers, including CERN, Frascati, Oslo, Oxford, RAL and Rome. The collaboration was initially set up with the aim of studying the feasibility of a software system to allow direct file exchange between computers which do not share a common Virtual File Protocol. After the completion of this first phase, an implementation phase started and, since March 1985, an experimental service based on this system has been running at CERN between DECnet, CERNET and the UK Coloured Book protocols. The authors present the motivations that, together with previous gateway experiences, led to the definition of GIFT specifications and to the implementation of the GIFT Kernel system. The position of GIFT in the overall development framework of the networking facilities needed by large international collaborations within the HEP community is explained. (Auth.)

FROM CAD MODEL TO 3D PRINT VIA “STL” FILE FORMAT

Directory of Open Access Journals (Sweden)

Cătălin IANCU

2010-06-01

Full Text Available The paper work presents the STL file format, which is now used for transferring information from CAD software to a 3D printer, for obtaining the solid model in Rapid prototyping and Computer Aided Manufacturing. It’s presented also the STL format structure, its history, limitations and further development, as well as its new version to arrive and other similar file formats. As a conclusion, STL files used to transfer data from CAD package to 3D printers has a series of limitations and therefore new formats will replace it soon.

Transmission of the environmental radiation data files on the internet

International Nuclear Information System (INIS)

Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi; Matsumoto, Atsushi; Kyoh, Bunkei

1999-01-01

Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3''φ x 3'' NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of γ-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

Transmission of the environmental radiation data files on the internet

Energy Technology Data Exchange (ETDEWEB)

Yamaguchi, Yoshiaki; Saito, Tadashi; Yamamoto, Takayoshi [Osaka Univ., Suita (Japan). Radioisotope Research Center; Matsumoto, Atsushi; Kyoh, Bunkei

1999-01-01

Recently, any text or data file has come to be transportable through the Internet with a personal computer. It is, however, restricted by selection of monitoring point to lay the cable because the personal circuit is generally used in case of continuous type environmental monitors. This is the reason why we have developed an environmental monitoring system that can transmit radiation data files on the Internet. Both 3``{phi} x 3`` NaI(Tl) detector and Thermo-Hydrometer are installed in the monitoring post of this system, and the data files of those detectors are transmitted from a personal computer at the monitoring point to Radioisotope Research Center of Osaka University. Environmental monitoring data from remote places have easily been obtained due to the data transmission through the Internet. Moreover, the system brings a higher precision of the environmental monitoring data because it includes the energy information of {gamma}-rays. If it is possible to maintain the monitors at remote places, this system could execute the continuous environmental monitoring over the wide area. (author)

Feasability Study and Protocol Development for Manufacturing of a Veterinarian Drug Using Local Plant Sources as Raw Materials

Energy Technology Data Exchange (ETDEWEB)

Davison, B. H.; Kuritz, T.

2006-08-28

This CRADA was a collaborative effort between the Oak Ridge National Laboratory (ORNL) and Sass & Sass, Inc. It also had involvement with the University of Tennessee Knoxville (UTK) The CRADA focused on the development and commercialization in the U.S. of the substance developed in Russia with potential veterinary applications. The project addressed validation and further characterization of the lead substance necessary for its commercialization in the U.S. market as a veterinarian biologic and at the commercialization of the product for the Russian market, by the Russian group establishing of sustainability of the Russian research groups.

Grid collector: An event catalog with automated file management

Energy Technology Data Exchange (ETDEWEB)

Wu, Kesheng; Zhang, Wei-Ming; Sim, Alexander; Gu, Junmin; Shoshani, Arie

2003-10-17

High Energy Nuclear Physics (HENP) experiments such as STAR at BNL and ATLAS at CERN produce large amounts of data that are stored as files on mass storage systems in computer centers. In these files, the basic unit of data is an event. Analysis is typically performed on a selected set of events. The files containing these events have to be located, copied from mass storage systems to disks before analysis, and removed when no longer needed. These file management tasks are tedious and time consuming. Typically, all events contained in the files are read into memory before a selection is made. Since the time to read the events dominate the overall execution time, reading the unwanted event needlessly increases the analysis time. The Grid Collector is a set of software modules that works together to address these two issues. It automates the file management tasks and provides ''direct'' access to the selected events for analyses. It is currently integrated with the STAR analysis framework. The users can select events based on tags, such as, ''production date between March 10 and 20, and the number of charged tracks > 100.'' The Grid Collector locates the files containing relevant events, transfers the files across the Grid if necessary, and delivers the events to the analysis code through the familiar iterators. There has been some research efforts to address the file management issues, the Grid Collector is unique in that it addresses the event access issue together with the file management issues. This makes it more useful to a large variety of users.

Final Report for File System Support for Burst Buffers on HPC Systems

Energy Technology Data Exchange (ETDEWEB)

Yu, W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mohror, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-27

Distributed burst buffers are a promising storage architecture for handling I/O workloads for exascale computing. As they are being deployed on more supercomputers, a file system that efficiently manages these burst buffers for fast I/O operations carries great consequence. Over the past year, FSU team has undertaken several efforts to design, prototype and evaluate distributed file systems for burst buffers on HPC systems. These include MetaKV: a Key-Value Store for Metadata Management of Distributed Burst Buffers, a user-level file system with multiple backends, and a specialized file system for large datasets of deep neural networks. Our progress for these respective efforts are elaborated further in this report.

Characteristics of file sharing and peer to peer networking | Opara ...

African Journals Online (AJOL)

Characteristics of file sharing and peer to peer networking. ... distributing or providing access to digitally stored information, such as computer programs, ... including in multicast systems, anonymous communications systems, and web caches.

Adobe acrobat: an alternative electronic teaching file construction methodology independent of HTML restrictions.

Science.gov (United States)

Katzman, G L

2001-03-01

The goal of the project was to create a method by which an in-house digital teaching file could be constructed that was simple, inexpensive, independent of hypertext markup language (HTML) restrictions, and appears identical on multiple platforms. To accomplish this, Microsoft PowerPoint and Adobe Acrobat were used in succession to assemble digital teaching files in the Acrobat portable document file format. They were then verified to appear identically on computers running Windows, Macintosh Operating Systems (OS), and the Silicon Graphics Unix-based OS as either a free-standing file using Acrobat Reader software or from within a browser window using the Acrobat browser plug-in. This latter display method yields a file viewed through a browser window, yet remains independent of underlying HTML restrictions, which may confer an advantage over simple HTML teaching file construction. Thus, a hybrid of HTML-distributed Adobe Acrobat generated WWW documents may be a viable alternative for digital teaching file construction and distribution.

Nuclear structure data file. A manual for preparation of data sets

International Nuclear Information System (INIS)

Ewbank, W.B.; Schmorak, M.R.; Bertrand, F.E.; Feliciano, M.; Horen, D.J.

1975-06-01

The Nuclear Data Project at ORNL is building a computer-based file of nuclear structure data, which is intended for use by both basic and applied users. For every nucleus, the Nuclear Structure Data File contains evaluated nuclear structure information. This manual describes a standard input format for nuclear structure data. The format is sufficiently structured that bulk data can be entered efficiently. At the same time, the structure is open-ended and can accommodate most measured or deduced quantities that yield nuclear structure information. Computer programs have been developed at the Data Project to perform consistency checking and routine calculations. Programs are also used for preparing level scheme drawings. (U.S.)

High School and Beyond Transcripts Survey (1982). Data File User's Manual. Contractor Report.

Science.gov (United States)

Jones, Calvin; And Others

This data file user's manual documents the procedures used to collect and process high school transcripts for a large sample of the younger cohort (1980 sophomores) in the High School and Beyond survey. The manual provides the user with the technical assistance needed to use the computer file and also discusses the following: (1) sample design for…

File structure and organization in the automation system for operative account of equipment and materials in JINR

International Nuclear Information System (INIS)

Gulyaeva, N.D.; Markova, N.F.; Nikitina, V.I.; Tentyukova, G.N.

1975-01-01

The structure and organization of files in the information bank for the first variant of a JINR material and technical supply subsystem are described. Automated system of equipment operative stock-taking on the base of the SDS-6200 computer is developed. Information is stored on magnetic discs. The arrangement of each file depends on its purpose and structure of data. Access to the files can be arbitrary or consecutive. The files are divided into groups: primary document files, long-term reference, information on items that may change as a result of administrative decision [ru

Experimental Analysis of File Transfer Rates over Wide-Area Dedicated Connections

Energy Technology Data Exchange (ETDEWEB)

Rao, Nageswara S. [ORNL; Liu, Qiang [ORNL; Sen, Satyabrata [ORNL; Hinkel, Gregory Carl [ORNL; Imam, Neena [ORNL; Foster, Ian [University of Chicago; Kettimuthu, R. [Argonne National Laboratory (ANL); Settlemyer, Bradley [Los Alamos National Laboratory (LANL); Wu, Qishi [University of Memphis; Yun, Daqing [Harrisburg University

2016-12-01

File transfers over dedicated connections, supported by large parallel file systems, have become increasingly important in high-performance computing and big data workflows. It remains a challenge to achieve peak rates for such transfers due to the complexities of file I/O, host, and network transport subsystems, and equally importantly, their interactions. We present extensive measurements of disk-to-disk file transfers using Lustre and XFS file systems mounted on multi-core servers over a suite of 10 Gbps emulated connections with 0-366 ms round trip times. Our results indicate that large buffer sizes and many parallel flows do not always guarantee high transfer rates. Furthermore, large variations in the measured rates necessitate repeated measurements to ensure confidence in inferences based on them. We propose a new method to efficiently identify the optimal joint file I/O and network transport parameters using a small number of measurements. We show that for XFS and Lustre with direct I/O, this method identifies configurations achieving 97% of the peak transfer rate while probing only 12% of the parameter space.

Image Steganography of Multiple File Types with Encryption and Compression Algorithms

Directory of Open Access Journals (Sweden)

Ernest Andreigh C. Centina

2017-05-01

Full Text Available The goals of this study were to develop a system intended for securing files through the technique of image steganography integrated with cryptography by utilizing ZLIB Algorithm for compressing and decompressing secret files, DES Algorithm for encryption and decryption, and Least Significant Bit Algorithm for file embedding and extraction to avoid compromise on highly confidential files from exploits of unauthorized persons. Ensuing to this, the system is in acc ordance with ISO 9126 international quality standards. Every quality criteria of the system was evaluated by 10 Information Technology professionals, and the arithmetic Mean and Standard Deviation of the survey were computed. The result exhibits that m ost of them strongly agreed that the system is excellently effective based on Functionality, Reliability, Usability, Efficiency, Maintainability and Portability conformance to ISO 9126 standards. The system was found to be a useful tool for both governmen t agencies and private institutions for it could keep not only the message secret but also the existence of that particular message or file et maintaining the privacy of highly confidential and sensitive files from unauthorized access.

Database organization for computer-aided characterization of laser diode

International Nuclear Information System (INIS)

Oyedokun, Z.O.

1988-01-01

Computer-aided data logging involves a huge amount of data which must be properly managed for optimized storage space, easy access, retrieval and utilization. An organization method is developed to enhance the advantages of computer-based data logging of the testing of the semiconductor injection laser which optimize storage space, permit authorized user easy access and inhibits penetration. This method is based on unique file identification protocol tree structure and command file-oriented access procedures

Next generation WLCG File Transfer Service (FTS)

CERN Multimedia

CERN. Geneva

2012-01-01

LHC experiments at CERN and worldwide utilize WLCG resources and middleware components to perform distributed computing tasks. One of the most important tasks is reliable file replication. It is a complex problem, suffering from transfer failures, disconnections, transfer duplication, server and network overload, differences in storage systems, etc. To address these problems, EMI and gLite have provided the independent File Transfer Service (FTS) and Grid File Access Library (GFAL) tools. Their development started almost a decade ago, in the meantime, requirements in data management have changed - the old architecture of FTS and GFAL cannot keep support easily these changes. Technology has also been progressing: FTS and GFAL do not fit into the new paradigms (cloud, messaging, for example). To be able to serve the next stage of LHC data collecting (from 2013), we need a new generation of  these tools: FTS 3 and GFAL 2. We envision a service requiring minimal configuration, which can dynamically adapt to the...

Students "Hacking" School Computer Systems

Science.gov (United States)

Stover, Del

2005-01-01

This article deals with students hacking school computer systems. School districts are getting tough with students "hacking" into school computers to change grades, poke through files, or just pit their high-tech skills against district security. Dozens of students have been prosecuted recently under state laws on identity theft and unauthorized…

A History of the Andrew File System

CERN Multimedia

CERN. Geneva; Altman, Jeffrey

2011-01-01

Derrick Brashear and Jeffrey Altman will present a technical history of the evolution of Andrew File System starting with the early days of the Andrew Project at Carnegie Mellon through the commercialization by Transarc Corporation and IBM and a decade of OpenAFS. The talk will be technical with a focus on the various decisions and implementation trade-offs that were made over the course of AFS versions 1 through 4, the development of the Distributed Computing Environment Distributed File System (DCE DFS), and the course of the OpenAFS development community. The speakers will also discuss the various AFS branches developed at the University of Michigan, Massachusetts Institute of Technology and Carnegie Mellon University.

SIDS-toADF File Mapping Manual

Science.gov (United States)

McCarthy, Douglas; Smith, Matthew; Poirier, Diane; Smith, Charles A. (Technical Monitor)

2002-01-01

The "CFD General Notation System" (CGNS) consists of a collection of conventions, and conforming software, for the storage and retrieval of Computational Fluid Dynamics (CFD) data. It facilitates the exchange of data between sites and applications, and helps stabilize the archiving of aerodynamic data. This effort was initiated in order to streamline the procedures in exchanging data and software between NASA and its customers, but the goal is to develop CGNS into a National Standard for the exchange of aerodynamic data. The CGNS development team is comprised of members from Boeing Commercial Airplane Group, NASA-Ames, NASA-Langley, NASA-Lewis, McDonnell-Douglas Corporation (now Boeing-St. Louis), Air Force-Wright Lab., and ICEM-CFD Engineering. The elements of CGNS address all activities associated with the storage of data on external media and its movement to and from application programs. These elements include: 1) The Advanced Data Format (ADF) Database manager, consisting of both a file format specification and its I/O software, which handles the actual reading and writing of data from and to external storage media; 2) The Standard Interface Data Structures (SIDS), which specify the intellectual content of CFD data and the conventions governing naming and terminology; 3) The SIDS-to-ADF File Mapping conventions, which specify the exact location where the CFD data defined by the SIDS is to be stored within the ADF file(s); and 4) The CGNS Mid-level Library, which provides CFD-knowledgeable routines suitable for direct installation into application codes. The SIDS-toADF File Mapping Manual specifies the exact manner in which, under CGNS conventions, CFD data structures (the SIDS) are to be stored in (i.e., mapped onto) the file structure provided by the database manager (ADF). The result is a conforming CGNS database. Adherence to the mapping conventions guarantees uniform meaning and location of CFD data within ADF files, and thereby allows the construction of

Competency Reference for Computer Assisted Drafting.

Science.gov (United States)

Oregon State Dept. of Education, Salem. Div. of Vocational Technical Education.

This guide, developed in Oregon, lists competencies essential for students in computer-assisted drafting (CAD). Competencies are organized in eight categories: computer hardware, file usage and manipulation, basic drafting techniques, mechanical drafting, specialty disciplines, three dimensional drawing/design, plotting/printing, and advanced CAD.…

Distributed computing for FTU data handling

Energy Technology Data Exchange (ETDEWEB)

Bertocchi, A. E-mail: bertocchi@frascati.enea.it; Bracco, G.; Buceti, G.; Centioli, C.; Giovannozzi, E.; Iannone, F.; Panella, M.; Vitale, V

2002-06-01

The growth of data warehouse in tokamak experiment is leading fusion laboratories to provide new IT solutions in data handling. In the last three years, the Frascati Tokamak Upgrade (FTU) experimental database was migrated from IBM-mainframe to Unix distributed computing environment. The migration efforts have taken into account the following items: (1) a new data storage solution based on storage area network over fibre channel; (2) andrew file system (AFS) for wide area network file sharing; (3) 'one measure/one file' philosophy replacing 'one shot/one file' to provide a faster read/write data access; (4) more powerful services, such as AFS, CORBA and MDSplus to allow users to access FTU database from different clients, regardless their O.S.; (5) large availability of data analysis tools, from the locally developed utility SHOW to the multi-platform Matlab, interactive data language and jScope (all these tools are now able to access also the Joint European Torus data, in the framework of the remote data access activity); (6) a batch-computing cluster of Alpha/CompaqTru64 CPU based on CODINE/GRD to optimize utilization of software and hardware resources.

Input data requirements for special processors in the computation system containing the VENTURE neutronics code

International Nuclear Information System (INIS)

Vondy, D.R.; Fowler, T.B.; Cunningham, G.W.

1976-11-01

This report presents user input data requirements for certain special processors in a nuclear reactor computation system. These processors generally read data in formatted form and generate binary interface data files. Some data processing is done to convert from the user-oriented form to the interface file forms. The VENTURE diffusion theory neutronics code and other computation modules in this system use the interface data files which are generated

Input data requirements for special processors in the computation system containing the VENTURE neutronics code

International Nuclear Information System (INIS)

Vondy, D.R.; Fowler, T.B.; Cunningham, G.W.

1979-07-01

User input data requirements are presented for certain special processors in a nuclear reactor computation system. These processors generally read data in formatted form and generate binary interface data files. Some data processing is done to convert from the user oriented form to the interface file forms. The VENTURE diffusion theory neutronics code and other computation modules in this system use the interface data files which are generated

The Fifth Workshop on HPC Best Practices: File Systems and Archives

Energy Technology Data Exchange (ETDEWEB)

Hick, Jason; Hules, John; Uselton, Andrew

2011-11-30

The workshop on High Performance Computing (HPC) Best Practices on File Systems and Archives was the fifth in a series sponsored jointly by the Department Of Energy (DOE) Office of Science and DOE National Nuclear Security Administration. The workshop gathered technical and management experts for operations of HPC file systems and archives from around the world. Attendees identified and discussed best practices in use at their facilities, and documented findings for the DOE and HPC community in this report.

JENDL special purpose file

International Nuclear Information System (INIS)

Nakagawa, Tsuneo

1995-01-01

In JENDL-3,2, the data on all the reactions having significant cross section over the neutron energy from 0.01 meV to 20 MeV are given for 340 nuclides. The object range of application extends widely, such as the neutron engineering, shield and others of fast reactors, thermal neutron reactors and nuclear fusion reactors. This is a general purpose data file. On the contrary to this, the file in which only the data required for a specific application field are collected is called special purpose file. The file for dosimetry is a typical special purpose file. The Nuclear Data Center, Japan Atomic Energy Research Institute, is making ten kinds of JENDL special purpose files. The files, of which the working groups of Sigma Committee are in charge, are listed. As to the format of the files, ENDF format is used similarly to JENDL-3,2. Dosimetry file, activation cross section file, (α, n) reaction data file, fusion file, actinoid file, high energy data file, photonuclear data file, PKA/KERMA file, gas production cross section file and decay data file are described on their contents, the course of development and their verification. Dosimetry file and gas production cross section file have been completed already. As for the others, the expected time of completion is shown. When these files are completed, they are opened to the public. (K.I.)

A lightweight high availability strategy for Atlas LCG File Catalogs

International Nuclear Information System (INIS)

Martelli, Barbara; Salvo, Alessandro de; Anzellotti, Daniela; Rinaldi, Lorenzo; Cavalli, Alessandro; Pra, Stefano dal; Dell'Agnello, Luca; Gregori, Daniele; Prosperini, Andrea; Ricci, Pier Paolo; Sapunenko, Vladimir

2010-01-01

The LCG File Catalog is a key component of the LHC Computing Grid middleware [1], as it contains the mapping between Logical File Names and Physical File Names on the Grid. The Atlas computing model foresees multiple local LFC housed in each Tier-1 and Tier-0, containing all information about files stored in the regional cloud. As the local LFC contents are presently not replicated anywhere, this turns out in a dangerous single point of failure for all of the Atlas regional clouds. In order to solve this problem we propose a novel solution for high availability (HA) of Oracle based Grid services, obtained by composing an Oracle Data Guard deployment and a series of application level scripts. This approach has the advantage of being very easy to deploy and maintain, and represents a good candidate solution for all Tier-2s which are usually little centres with little manpower dedicated to service operations. We also present the results of a wide range of functionality and performance tests run on a test-bed having characteristics similar to the ones required for production. The test-bed consists of a failover deployment between the Italian LHC Tier-1 (INFN - CNAF) and an Atlas Tier-2 located at INFN - Roma1. Moreover, we explain how the proposed strategy can be deployed on the present Grid infrastructure, without requiring any change to the middleware and in a way that is totally transparent to end users and applications.

Teaching, Learning, and Collaborating in the Cloud: Applications of Cloud Computing for Educators in Post-Secondary Institutions

Science.gov (United States)

Aaron, Lynn S.; Roche, Catherine M.

2012-01-01

"Cloud computing" refers to the use of computing resources on the Internet instead of on individual personal computers. The field is expanding and has significant potential value for educators. This is discussed with a focus on four main functions: file storage, file synchronization, document creation, and collaboration--each of which has…

Publication and Retrieval of Computational Chemical-Physical Data Via the Semantic Web. Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Ostlund, Neil [Chemical Semantics, Inc., Gainesville, FL (United States)

2017-07-20

This research showed the feasibility of applying the concepts of the Semantic Web to Computation Chemistry. We have created the first web portal (www.chemsem.com) that allows data created in the calculations of quantum chemistry, and other such chemistry calculations to be placed on the web in a way that makes the data accessible to scientists in a semantic form never before possible. The semantic web nature of the portal allows data to be searched, found, and used as an advance over the usual approach of a relational database. The semantic data on our portal has the nature of a Giant Global Graph (GGG) that can be easily merged with related data and searched globally via a SPARQL Protocol and RDF Query Language (SPARQL) that makes global searches for data easier than with traditional methods. Our Semantic Web Portal requires that the data be understood by a computer and hence defined by an ontology (vocabulary). This ontology is used by the computer in understanding the data. We have created such an ontology for computational chemistry (purl.org/gc) that encapsulates a broad knowledge of the field of computational chemistry. We refer to this ontology as the Gainesville Core. While it is perhaps the first ontology for computational chemistry and is used by our portal, it is only a start of what must be a long multi-partner effort to define computational chemistry. In conjunction with the above efforts we have defined a new potential file standard (Common Standard for eXchange – CSX for computational chemistry data). This CSX file is the precursor of data in the Resource Description Framework (RDF) form that the semantic web requires. Our portal translates CSX files (as well as other computational chemistry data files) into RDF files that are part of the graph database that the semantic web employs. We propose a CSX file as a convenient way to encapsulate computational chemistry data.

11 CFR 100.19 - File, filed or filing (2 U.S.C. 434(a)).

Science.gov (United States)

2010-01-01

... a facsimile machine or by electronic mail if the reporting entity is not required to file..., including electronic reporting entities, may use the Commission's website's on-line program to file 48-hour... the reporting entity is not required to file electronically in accordance with 11 CFR 104.18. [67 FR...

Storage of sparse files using parallel log-structured file system

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary; Torres, Aaron

2017-11-07

A sparse file is stored without holes by storing a data portion of the sparse file using a parallel log-structured file system; and generating an index entry for the data portion, the index entry comprising a logical offset, physical offset and length of the data portion. The holes can be restored to the sparse file upon a reading of the sparse file. The data portion can be stored at a logical end of the sparse file. Additional storage efficiency can optionally be achieved by (i) detecting a write pattern for a plurality of the data portions and generating a single patterned index entry for the plurality of the patterned data portions; and/or (ii) storing the patterned index entries for a plurality of the sparse files in a single directory, wherein each entry in the single directory comprises an identifier of a corresponding sparse file.

49 CFR 564.5 - Information filing; agency processing of filings.

Science.gov (United States)

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Information filing; agency processing of filings... HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION REPLACEABLE LIGHT SOURCE INFORMATION (Eff. until 12-01-12) § 564.5 Information filing; agency processing of filings. (a) Each manufacturer...

Benchmarking and monitoring framework for interconnected file synchronization and sharing services

DEFF Research Database (Denmark)

Mrówczyński, Piotr; Mościcki, Jakub T.; Lamanna, Massimo

2018-01-01

computing and storage infrastructure in the research labs. In this work we present a benchmarking and monitoring framework for file synchronization and sharing services. It allows service providers to monitor the operational status of their services, understand the service behavior under different load...... types and with different network locations of the synchronization clients. The framework is designed as a monitoring and benchmarking tool to provide performance and robustness metrics for interconnected file synchronization and sharing services such as Open Cloud Mesh....

Translator program converts computer printout into braille language

Science.gov (United States)

Powell, R. A.

1967-01-01

Computer program converts print image tape files into six dot Braille cells, enabling a blind computer programmer to monitor and evaluate data generated by his own programs. The Braille output is printed 8 lines per inch.

Optimized distributed systems achieve significant performance improvement on sorted merging of massive VCF files.

Science.gov (United States)

Sun, Xiaobo; Gao, Jingjing; Jin, Peng; Eng, Celeste; Burchard, Esteban G; Beaty, Terri H; Ruczinski, Ingo; Mathias, Rasika A; Barnes, Kathleen; Wang, Fusheng; Qin, Zhaohui S

2018-06-01

Sorted merging of genomic data is a common data operation necessary in many sequencing-based studies. It involves sorting and merging genomic data from different subjects by their genomic locations. In particular, merging a large number of variant call format (VCF) files is frequently required in large-scale whole-genome sequencing or whole-exome sequencing projects. Traditional single-machine based methods become increasingly inefficient when processing large numbers of files due to the excessive computation time and Input/Output bottleneck. Distributed systems and more recent cloud-based systems offer an attractive solution. However, carefully designed and optimized workflow patterns and execution plans (schemas) are required to take full advantage of the increased computing power while overcoming bottlenecks to achieve high performance. In this study, we custom-design optimized schemas for three Apache big data platforms, Hadoop (MapReduce), HBase, and Spark, to perform sorted merging of a large number of VCF files. These schemas all adopt the divide-and-conquer strategy to split the merging job into sequential phases/stages consisting of subtasks that are conquered in an ordered, parallel, and bottleneck-free way. In two illustrating examples, we test the performance of our schemas on merging multiple VCF files into either a single TPED or a single VCF file, which are benchmarked with the traditional single/parallel multiway-merge methods, message passing interface (MPI)-based high-performance computing (HPC) implementation, and the popular VCFTools. Our experiments suggest all three schemas either deliver a significant improvement in efficiency or render much better strong and weak scalabilities over traditional methods. Our findings provide generalized scalable schemas for performing sorted merging on genetics and genomics data using these Apache distributed systems.

Cut-and-Paste file-systems: integrating simulators and file systems

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1995-01-01

We have implemented an integrated and configurable file system called the Pegasus filesystem (PFS) and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-systemalgorithms, PFS is used for on-line file-systemdata storage. Algorithms are first analyzed in

Computer-assisted enzyme immunoassays and simplified immunofluorescence assays: applications for the diagnostic laboratory and the veterinarian's office.

Science.gov (United States)

Jacobson, R H; Downing, D R; Lynch, T J

1982-11-15

A computer-assisted enzyme-linked immunosorbent assay (ELISA) system, based on kinetics of the reaction between substrate and enzyme molecules, was developed for testing large numbers of sera in laboratory applications. Systematic and random errors associated with conventional ELISA technique were identified leading to results formulated on a statistically validated, objective, and standardized basis. In a parallel development, an inexpensive system for field and veterinary office applications contained many of the qualities of the computer-assisted ELISA. This system uses a fluorogenic indicator (rather than the enzyme-substrate interaction) in a rapid test (15 to 20 minutes' duration) which promises broad application in serodiagnosis.

Cluster computing software for GATE simulations

International Nuclear Information System (INIS)

Beenhouwer, Jan de; Staelens, Steven; Kruecker, Dirk; Ferrer, Ludovic; D'Asseler, Yves; Lemahieu, Ignace; Rannou, Fernando R.

2007-01-01

Geometry and tracking (GEANT4) is a Monte Carlo package designed for high energy physics experiments. It is used as the basis layer for Monte Carlo simulations of nuclear medicine acquisition systems in GEANT4 Application for Tomographic Emission (GATE). GATE allows the user to realistically model experiments using accurate physics models and time synchronization for detector movement through a script language contained in a macro file. The downside of this high accuracy is long computation time. This paper describes a platform independent computing approach for running GATE simulations on a cluster of computers in order to reduce the overall simulation time. Our software automatically creates fully resolved, nonparametrized macros accompanied with an on-the-fly generated cluster specific submit file used to launch the simulations. The scalability of GATE simulations on a cluster is investigated for two imaging modalities, positron emission tomography (PET) and single photon emission computed tomography (SPECT). Due to a higher sensitivity, PET simulations are characterized by relatively high data output rates that create rather large output files. SPECT simulations, on the other hand, have lower data output rates but require a long collimator setup time. Both of these characteristics hamper scalability as a function of the number of CPUs. The scalability of PET simulations is improved here by the development of a fast output merger. The scalability of SPECT simulations is improved by greatly reducing the collimator setup time. Accordingly, these two new developments result in higher scalability for both PET and SPECT simulations and reduce the computation time to more practical values

Risk perceptions of public health and food safety hazards in poultry husbandry by citizens, poultry farmers and poultry veterinarians

Science.gov (United States)

Poortvliet, P M; Ekkel, E D; Kemp, B; Stassen, E N

2018-01-01

Abstract Differences in risk perceptions of public health and food safety hazards in various poultry husbandry systems by various stakeholder groups, may affect the acceptability of those husbandry systems. Therefore, the objective was to gain insight into risk perceptions of citizens, poultry farmers, and poultry veterinarians regarding food safety and public health hazards in poultry husbandry systems, and into factors explaining these risk perceptions. We surveyed risk perceptions of Campylobacter contamination of broiler meat, avian influenza introduction in laying hens, and altered dioxin levels in eggs for the most commonly used broiler and laying hen husbandry systems in Dutch citizens (n = 2,259), poultry farmers (n = 100), and poultry veterinarians (n = 41). Citizens perceived the risks of the three hazards in the indoor systems higher and in the outdoor systems lower than did the professionals. Citizens reported higher concerns regarding aspects reflecting underlying psychological factors of risk perception compared to professionals. Professionals indicated a relatively low level of personal control, which might imply risk denial. Of the socio-demographic characteristics, gender and childhood residence were associated with risk perceptions. The influence of other factors of risks perception are discussed. It is suggested that risk perceptions of all stakeholder groups are influenced by affect, stigma, and underlying values. To adapt current or new husbandry systems that can count on societal support, views of key stakeholders and multiple aspects such as animal welfare, public health, food safety, and underlying values should be considered integrally. When trade-offs, such as between animal welfare and public health have to be made, insight into underlying values might help to find consensus among stakeholders. PMID:29161444

Cut-and-Paste file-systems : integrating simulators and file systems

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

We have implemented an integrated and configurable file system called the PFS and a trace-driven file-system simulator called Patsy. Patsy is used for off-line analysis of file-system algorithms, PFS is used for on-line file-system data storage. Algorithms are first analyzed in Patsy and when we are

Computer stress study of bone with computed tomography

International Nuclear Information System (INIS)

Linden, M.J.; Marom, S.A.; Linden, C.N.

1986-01-01

A computer processing tool has been developed which, together with a finite element program, determines the stress-deformation pattern in a long bone, utilizing Computed Tomography (CT) data files for the geometry and radiographic density information. The geometry, together with mechanical properties and boundary conditions: loads and displacements, comprise the input of the Finite element (FE) computer program. The output of the program is the stresses and deformations in the bone. The processor is capable of developing an accurate three-dimensional finite element model from a scanned human long bone due to the CT high pixel resolution and the local mechanical properties determined from the radiographic densities of the scanned bone. The processor, together with the finite element program, serves first as an analysis tool towards improved understanding of bone function and remodelling. In this first stage, actual long bones may be scanned and analyzed under applied loads and displacements, determined from existing gait analyses. The stress-deformation patterns thus obtained may be used for studying the biomechanical behavior of particular long bones such as bones with implants and with osteoporosis. As a second stage, this processor may serve as a diagnostic tool for analyzing the biomechanical response of a specific patient's long long bone under applied loading by utilizing a CT data file of the specific bone as an input to the processor with the FE program

Computed micro-tomographic evaluation of glide path with nickel-titanium rotary PathFile in maxillary first molars curved canals.

Science.gov (United States)

Pasqualini, Damiano; Bianchi, Caterina Chiara; Paolino, Davide Salvatore; Mancini, Lucia; Cemenasco, Andrea; Cantatore, Giuseppe; Castellucci, Arnaldo; Berutti, Elio

2012-03-01

X-ray computed micro-tomography scanning allows high-resolution 3-dimensional imaging of small objects. In this study, micro-CT scanning was used to compare the ability of manual and mechanical glide path to maintain the original root canal anatomy. Eight extracted upper first permanent molars were scanned at the TOMOLAB station at ELETTRA Synchrotron Light Laboratory in Trieste, Italy, with a microfocus cone-beam geometry system. A total of 2,400 projections on 360° have been acquired at 100 kV and 80 μA, with a focal spot size of 8 μm. Buccal root canals of each specimen (n = 16) were randomly assigned to PathFile (P) or stainless-steel K-file (K) to perform glide path at the full working length. Specimens were then microscanned at the apical level (A) and at the point of the maximum curvature level (C) for post-treatment analyses. Curvatures of root canals were classified as moderate (≤35°) or severe (≥40°). The ratio of diameter ratios (RDRs) and the ratio of cross-sectional areas (RAs) were assessed. For each level of analysis (A and C), 2 balanced 2-way factorial analyses of variance (P < .05) were performed to evaluate the significance of the instrument factor and of canal curvature factor as well as the interactions of the factors both with RDRs and RAs. Specimens in the K group had a mean curvature of 35.4° ± 11.5°; those in the P group had a curvature of 38° ± 9.9°. The instrument factor (P and K) was extremely significant (P < .001) for both the RDR and RA parameters, regardless of the point of analysis. Micro-CT scanning confirmed that NiTi rotary PathFile instruments preserve the original canal anatomy and cause less canal aberrations. Copyright © 2012 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Cloud Computing: Architecture and Services

OpenAIRE

Ms. Ravneet Kaur

2018-01-01

Cloud computing is Internet-based computing, whereby shared resources, software, and information are provided to computers and other devices on demand, like the electricity grid. It is a method for delivering information technology (IT) services where resources are retrieved from the Internet through web-based tools and applications, as opposed to a direct connection to a server. Rather than keeping files on a proprietary hard drive or local storage device, cloud-based storage makes it possib...

EVALUATED NUCLEAR STRUCTURE DATA FILE. A MANUAL FOR PREPARATION OF DATA SETS

International Nuclear Information System (INIS)

TULI, J.K.

2001-01-01

This manual describes the organization and structure of the Evaluated Nuclear Structure Data File (ENSDF). This computer-based file is maintained by the National Nuclear Data Center (NNDC) at Brookhaven National Laboratory for the international Nuclear Structure and Decay Data Network. For every mass number (presently, A ≤ 293), the Evaluated Nuclear Structure Data File (ENSDF) contains evaluated structure information. For masses A ≥ 44, this information is published in the Nuclear Data Sheets; for A < 44, ENSDF is based on compilations published in the journal Nuclear Physics. The information in ENSDF is updated by mass chain or by nuclide with a varying cycle time dependent on the availability of new information

File sharing

NARCIS (Netherlands)

van Eijk, N.

2011-01-01

‘File sharing’ has become generally accepted on the Internet. Users share files for downloading music, films, games, software etc. In this note, we have a closer look at the definition of file sharing, the legal and policy-based context as well as enforcement issues. The economic and cultural

A convertor and user interface to import CAD files into worldtoolkit virtual reality systems

Science.gov (United States)

Wang, Peter Hor-Ching

1996-01-01

Virtual Reality (VR) is a rapidly developing human-to-computer interface technology. VR can be considered as a three-dimensional computer-generated Virtual World (VW) which can sense particular aspects of a user's behavior, allow the user to manipulate the objects interactively, and render the VW at real-time accordingly. The user is totally immersed in the virtual world and feel the sense of transforming into that VW. NASA/MSFC Computer Application Virtual Environments (CAVE) has been developing the space-related VR applications since 1990. The VR systems in CAVE lab are based on VPL RB2 system which consists of a VPL RB2 control tower, an LX eyephone, an Isotrak polhemus sensor, two Fastrak polhemus sensors, a folk of Bird sensor, and two VPL DG2 DataGloves. A dynamics animator called Body Electric from VPL is used as the control system to interface with all the input/output devices and to provide the network communications as well as VR programming environment. The RB2 Swivel 3D is used as the modelling program to construct the VW's. A severe limitation of the VPL VR system is the use of RB2 Swivel 3D, which restricts the files to a maximum of 1020 objects and doesn't have the advanced graphics texture mapping. The other limitation is that the VPL VR system is a turn-key system which does not provide the flexibility for user to add new sensors and C language interface. Recently, NASA/MSFC CAVE lab provides VR systems built on Sense8 WorldToolKit (WTK) which is a C library for creating VR development environments. WTK provides device drivers for most of the sensors and eyephones available on the VR market. WTK accepts several CAD file formats, such as Sense8 Neutral File Format, AutoCAD DXF and 3D Studio file format, Wave Front OBJ file format, VideoScape GEO file format, Intergraph EMS stereolithographics and CATIA Stereolithographics STL file formats. WTK functions are object-oriented in their naming convention, are grouped into classes, and provide easy C

Digital Stratigraphy: Contextual Analysis of File System Traces in Forensic Science.

Science.gov (United States)

Casey, Eoghan

2017-12-28

This work introduces novel methods for conducting forensic analysis of file allocation traces, collectively called digital stratigraphy. These in-depth forensic analysis methods can provide insight into the origin, composition, distribution, and time frame of strata within storage media. Using case examples and empirical studies, this paper illuminates the successes, challenges, and limitations of digital stratigraphy. This study also shows how understanding file allocation methods can provide insight into concealment activities and how real-world computer usage can complicate digital stratigraphy. Furthermore, this work explains how forensic analysts have misinterpreted traces of normal file system behavior as indications of concealment activities. This work raises awareness of the value of taking the overall context into account when analyzing file system traces. This work calls for further research in this area and for forensic tools to provide necessary information for such contextual analysis, such as highlighting mass deletion, mass copying, and potential backdating. © 2017 American Academy of Forensic Sciences.

COMBINE archive and OMEX format: one file to share all information to reproduce a modeling project.

Science.gov (United States)

Bergmann, Frank T; Adams, Richard; Moodie, Stuart; Cooper, Jonathan; Glont, Mihai; Golebiewski, Martin; Hucka, Michael; Laibe, Camille; Miller, Andrew K; Nickerson, David P; Olivier, Brett G; Rodriguez, Nicolas; Sauro, Herbert M; Scharm, Martin; Soiland-Reyes, Stian; Waltemath, Dagmar; Yvon, Florent; Le Novère, Nicolas

2014-12-14

With the ever increasing use of computational models in the biosciences, the need to share models and reproduce the results of published studies efficiently and easily is becoming more important. To this end, various standards have been proposed that can be used to describe models, simulations, data or other essential information in a consistent fashion. These constitute various separate components required to reproduce a given published scientific result. We describe the Open Modeling EXchange format (OMEX). Together with the use of other standard formats from the Computational Modeling in Biology Network (COMBINE), OMEX is the basis of the COMBINE Archive, a single file that supports the exchange of all the information necessary for a modeling and simulation experiment in biology. An OMEX file is a ZIP container that includes a manifest file, listing the content of the archive, an optional metadata file adding information about the archive and its content, and the files describing the model. The content of a COMBINE Archive consists of files encoded in COMBINE standards whenever possible, but may include additional files defined by an Internet Media Type. Several tools that support the COMBINE Archive are available, either as independent libraries or embedded in modeling software. The COMBINE Archive facilitates the reproduction of modeling and simulation experiments in biology by embedding all the relevant information in one file. Having all the information stored and exchanged at once also helps in building activity logs and audit trails. We anticipate that the COMBINE Archive will become a significant help for modellers, as the domain moves to larger, more complex experiments such as multi-scale models of organs, digital organisms, and bioengineering.

Temperature increases on the external root surface during endodontic treatment using single file systems.

Science.gov (United States)

Özkocak, I; Taşkan, M M; Gökt Rk, H; Aytac, F; Karaarslan, E Şirin

2015-01-01

The aim of this study is to evaluate increases in temperature on the external root surface during endodontic treatment with different rotary systems. Fifty human mandibular incisors with a single root canal were selected. All root canals were instrumented using a size 20 Hedstrom file, and the canals were irrigated with 5% sodium hypochlorite solution. The samples were randomly divided into the following three groups of 15 teeth: Group 1: The OneShape Endodontic File no.: 25; Group 2: The Reciproc Endodontic File no.: 25; Group 3: The WaveOne Endodontic File no.: 25. During the preparation, the temperature changes were measured in the middle third of the roots using a noncontact infrared thermometer. The temperature data were transferred from the thermometer to the computer and were observed graphically. Statistical analysis was performed using the Kruskal-Wallis analysis of variance at a significance level of 0.05. The increases in temperature caused by the OneShape file system were lower than those of the other files (P file showed the highest temperature increases. However, there were no significant differences between the Reciproc and WaveOne files. The single file rotary systems used in this study may be recommended for clinical use.

Application of personal computer to development of entrance management system for radiating facilities

International Nuclear Information System (INIS)

Suzuki, Shogo; Hirai, Shouji

1989-01-01

The report describes a system for managing the entrance and exit of personnel to radiating facilities. A personal computer is applied to its development. Major features of the system is outlined first. The computer is connected to the gate and two magnetic card readers provided at the gate. The gate, which is installed at the entrance to a room under control, opens only for those who have a valid card. The entrance-exit management program developed is described next. The following three files are used: ID master file (random file of the magnetic card number, name, qualification, etc., of each card carrier), entrance-exit management file (random file of time of entrance/exit, etc., updated everyday), and entrance-exit record file (sequential file of card number, name, date, etc.), which are stored on floppy disks. A display is provided to show various lists including a list of workers currently in the room and a list of workers who left the room at earlier times of the day. This system is useful for entrance management of a relatively small facility. Though small in required cost, it requires only a few operators to perform effective personnel management. (N.K.)

Professional veterinarians in Jerez de los Caballeros (Badajoz, Spain during the 19th century

Directory of Open Access Journals (Sweden)

Francisco Javier Suárez-Guzmán

2015-12-01

Full Text Available Veterinarians had different names throughout the 19th century in Spain: veterinary surgeons, farriers, castrators, marshals, etc., and they were not professionally and socially recognized until the 20th century. In 1850 they were given sanitary and zootechnical responsibilities, although many of them continued practicing horse shodding. With the creation of veterinary schools, the foundations of modern veterinary medicine were established in Spain; this has a special importance for public health issues, especially regarding figures like deputy veterinary and meat inspector, as they tried to understand the impact of animal diseases on the population who consumed animal meat. Studies in the Historical Archives of Jerez de los Caballeros (Badajoz, Spain made it possible to analyze how veterinary professionals lived and worked there during the 19th century, how they settled in or left the city, how they treated epidemics in animals for human consumption, and how they suffered the economic difficulties of the period and the City. The destruction and loss of part of the Archives makes it difficult to obtain more data.

Evaluation of Drug Interactions and Prescription Errors of Poultry Veterinarians in North of Iran

Directory of Open Access Journals (Sweden)

Madadi MS

2014-03-01

Full Text Available Drug prescription errors are a common cause of adverse incidents and may lead to adverse outcomes, sometimes in subtle ways, being compounded by circumstances or further errors. Therefore, it is important that veterinarians issue the correct drug at the correct dose. Using two or more prescribed drugs may lead to drug interactions. Some drug interactions are very harmful and may have potential threats to the patient's health that is called antagonism. In a survey study, medication errors of 750 prescriptions, including dosage errors and drug interactions were studied. The results indicated that 20.8% of prescriptions had at least one drug interaction. The most interactions were related to antibiotics (69.1%, Sulfonamides (46.7%, Methenamine (46.7% and Florfenicol (20.2%. Analysis of dosage errors indicated that total drugs consumed by broilers in the summer are more than winter seasons. Based on these results, avoiding medication errors are important in the balanced prescribing of drugs and regular education of veterinary practitioners in a certain interval is needed.

How users organize electronic files on their workstations in the office environment: a preliminary study of personal information organization behaviour

Directory of Open Access Journals (Sweden)

Christopher S.G. Khoo

2007-01-01

Full Text Available An ongoing study of how people organize their computer files and folders on the hard disk of their office workstations. A questionnaire was used to collect information on the subjects, their work responsibilities and characteristics of their workstations. Data on file and folder names and file structure were extracted from the hard disk using a computer program STG FolderPrint Plus, DOS command and screen capture. A semi-structured interview collected information on subjects' strategies in naming and organizing files and folders, and in locating and retrieving files. The data were analysed mainly through qualitative analysis and content analysis. The subjects organized their folders in a variety of structures, from broad and shallow to narrow and deep hierarchies. One to three levels of folders is common. The labels for first level folders tended to be task-based or project-based. Most subjects located files by browsing the folder structure, with searching used as a last resort. The most common types of folder names were document type, organizational function or structure, and miscellaneous or temporary. The frequency of folders of different types appear related to the type of occupation.

Defining nuclear medical file formal based on DICOM standard

International Nuclear Information System (INIS)

He Bin; Jin Yongjie; Li Yulan

2001-01-01

With the wide application of computer technology in medical area, DICOM is becoming the standard of digital imaging and communication. The author discusses how to define medical imaging file formal based on DICOM standard. It also introduces the format of ANMIS system the authors defined the validity and integrality of this format

PRO/Mapper: a plotting program for the DEC PRO/300 personal computers utilizing the MAPPER graphics language

International Nuclear Information System (INIS)

Wachter, J.W.

1986-05-01

PRO/Mapper is an application for the Digital Equipment Corporation PRO/300 series of personal computers that facilitates the preparation of visuals such as graphs, charts, and maps in color or black and white. The user prepares an input data file containing English-language commands and writes it into a file using standard editor. PRO/Mapper then reads these files and draws graphs, maps, boxes, and complex line segments onto the computer screen. Axes, curves, and error bars may be plotted in graphical presentations. The commands of PRO/Mapper are a subset of the commands of the more sophisticated MAPPER program written for mainframe computers. The PRO/Mapper commands were chosen primarily for the production of linear graphs. Command files written for the PRO/300 are upward compatible with the Martin Marietta Energy Systems version of MAPPER and can be used to produce publication-quality slides, drawings, and maps on the various output devices of the Oak Ridge National Laboratory mainframe computers

Renewal-anomalous-heterogeneous files

International Nuclear Information System (INIS)

Flomenbom, Ophir

2010-01-01

Renewal-anomalous-heterogeneous files are solved. A simple file is made of Brownian hard spheres that diffuse stochastically in an effective 1D channel. Generally, Brownian files are heterogeneous: the spheres' diffusion coefficients are distributed and the initial spheres' density is non-uniform. In renewal-anomalous files, the distribution of waiting times for individual jumps is not exponential as in Brownian files, yet obeys: ψ α (t)∼t -1-α , 0 2 >, obeys, 2 >∼ 2 > nrml α , where 2 > nrml is the MSD in the corresponding Brownian file. This scaling is an outcome of an exact relation (derived here) connecting probability density functions of Brownian files and renewal-anomalous files. It is also shown that non-renewal-anomalous files are slower than the corresponding renewal ones.

NASA ARCH- A FILE ARCHIVAL SYSTEM FOR THE DEC VAX

Science.gov (United States)

Scott, P. J.

1994-01-01

The function of the NASA ARCH system is to provide a permanent storage area for files that are infrequently accessed. The NASA ARCH routines were designed to provide a simple mechanism by which users can easily store and retrieve files. The user treats NASA ARCH as the interface to a black box where files are stored. There are only five NASA ARCH user commands, even though NASA ARCH employs standard VMS directives and the VAX BACKUP utility. Special care is taken to provide the security needed to insure file integrity over a period of years. The archived files may exist in any of three storage areas: a temporary buffer, the main buffer, and a magnetic tape library. When the main buffer fills up, it is transferred to permanent magnetic tape storage and deleted from disk. Files may be restored from any of the three storage areas. A single file, multiple files, or entire directories can be stored and retrieved. archived entities hold the same name, extension, version number, and VMS file protection scheme as they had in the user's account prior to archival. NASA ARCH is capable of handling up to 7 directory levels. Wildcards are supported. User commands include TEMPCOPY, DISKCOPY, DELETE, RESTORE, and DIRECTORY. The DIRECTORY command searches a directory of savesets covering all three archival areas, listing matches according to area, date, filename, or other criteria supplied by the user. The system manager commands include 1) ARCHIVE- to transfer the main buffer to duplicate magnetic tapes, 2) REPORTto determine when the main buffer is full enough to archive, 3) INCREMENT- to back up the partially filled main buffer, and 4) FULLBACKUP- to back up the entire main buffer. On-line help files are provided for all NASA ARCH commands. NASA ARCH is written in DEC VAX DCL for interactive execution and has been implemented on a DEC VAX computer operating under VMS 4.X. This program was developed in 1985.

PC Graphic file programing

International Nuclear Information System (INIS)

Yang, Jin Seok

1993-04-01

This book gives description of basic of graphic knowledge and understanding and realization of graphic file form. The first part deals with graphic with graphic data, store of graphic data and compress of data, programing language such as assembling, stack, compile and link of program and practice and debugging. The next part mentions graphic file form such as Mac paint file, GEM/IMG file, PCX file, GIF file, and TIFF file, consideration of hardware like mono screen driver and color screen driver in high speed, basic conception of dithering and conversion of formality.

Experiences on File Systems: Which is the best file system for you?

CERN Document Server

Blomer, J

2015-01-01

The distributed file system landscape is scattered. Besides a plethora of research file systems, there is also a large number of production grade file systems with various strengths and weaknesses. The file system, as an abstraction of permanent storage, is appealing because it provides application portability and integration with legacy and third-party applications, including UNIX utilities. On the other hand, the general and simple file system interface makes it notoriously difficult for a distributed file system to perform well under a variety of different workloads. This contribution provides a taxonomy of commonly used distributed file systems and points out areas of research and development that are particularly important for high-energy physics.

Tools for remote computing in accelerator control

International Nuclear Information System (INIS)

Anderssen, P.S.; Frammery, V.; Wilcke, R.

1990-01-01

In modern accelerator control systems, the intelligence of the equipment is distributed in the geographical and the logical sense. Control processes for a large variety of tasks reside in both the equipment and the control computers. Hence successful operation hinges on the availability and reliability of the communication infrastructure. The computers are interconnected by a communication system and use remote procedure calls and message passing for information exchange. These communication mechanisms need a well-defined convention, i.e. a protocol. They also require flexibility in both the setup and changes to the protocol specification. The network compiler is a tool which provides the programmer with a means of establishing such a protocol for his application. Input to the network compiler is a single interface description file provided by the programmer. This file is written according to a grammar, and completely specifies the interprocess communication interfaces. Passed through the network compiler, the interface description file automatically produces the additional source code needed for the protocol. Hence the programmer does not have to be concerned about the details of the communication calls. Any further additions and modifications are made easy, because all the information about the interface is kept in a single file. (orig.)

Software For Computer-Security Audits

Science.gov (United States)

Arndt, Kate; Lonsford, Emily

1994-01-01

Information relevant to potential breaches of security gathered efficiently. Automated Auditing Tools for VAX/VMS program includes following automated software tools performing noted tasks: Privileged ID Identification, program identifies users and their privileges to circumvent existing computer security measures; Critical File Protection, critical files not properly protected identified; Inactive ID Identification, identifications of users no longer in use found; Password Lifetime Review, maximum lifetimes of passwords of all identifications determined; and Password Length Review, minimum allowed length of passwords of all identifications determined. Written in DEC VAX DCL language.

Open Computer Forensic Architecture a Way to Process Terabytes of Forensic Disk Images

Science.gov (United States)

Vermaas, Oscar; Simons, Joep; Meijer, Rob

This chapter describes the Open Computer Forensics Architecture (OCFA), an automated system that dissects complex file types, extracts metadata from files and ultimately creates indexes on forensic images of seized computers. It consists of a set of collaborating processes, called modules. Each module is specialized in processing a certain file type. When it receives a so called 'evidence', the information that has been extracted so far about the file together with the actual data, it either adds new information about the file or uses the file to derive a new 'evidence'. All evidence, original and derived, is sent to a router after being processed by a particular module. The router decides which module should process the evidence next, based upon the metadata associated with the evidence. Thus the OCFA system can recursively process images until from every compound file the embedded files, if any, are extracted, all information that the system can derive, has been derived and all extracted text is indexed. Compound files include, but are not limited to, archive- and zip-files, disk images, text documents of various formats and, for example, mailboxes. The output of an OCFA run is a repository full of derived files, a database containing all extracted information about the files and an index which can be used when searching. This is presented in a web interface. Moreover, processed data is easily fed to third party software for further analysis or to be used in data mining or text mining-tools. The main advantages of the OCFA system are Scalability, it is able to process large amounts of data.

Systematic control of large computer programs

International Nuclear Information System (INIS)

Goedbloed, J.P.; Klieb, L.

1986-07-01

A package of CCL, UPDATE, and FORTRAN procedures is described which facilitates the systematic control and development of large scientific computer programs. The package provides a general tool box for this purpose which contains many conveniences for the systematic administration of files, editing, reformating of line printer output files, etc. In addition, a small number of procedures is devoted to the problem of structured development of a large computer program which is used by a group of scientists. The essence of the method is contained in three procedures N, R, and X for the creation of a new UPDATE program library, its revision, and execution, resp., and a procedure REVISE which provides a joint editor - UPDATE session which combines the advantages of the two systems, viz. speed and rigor. (Auth.)

Computer system operation

International Nuclear Information System (INIS)

Lee, Young Jae; Lee, Hae Cho; Lee, Ho Yeun; Kim, Young Taek; Lee, Sung Kyu; Park, Jeong Suk; Nam, Ji Wha; Kim, Soon Kon; Yang, Sung Un; Sohn, Jae Min; Moon, Soon Sung; Park, Bong Sik; Lee, Byung Heon; Park, Sun Hee; Kim, Jin Hee; Hwang, Hyeoi Sun; Lee, Hee Ja; Hwang, In A.

1993-12-01

The report described the operation and the trouble shooting of main computer and KAERINet. The results of the project are as follows; 1. The operation and trouble shooting of the main computer system. (Cyber 170-875, Cyber 960-31, VAX 6320, VAX 11/780). 2. The operation and trouble shooting of the KAERINet. (PC to host connection, host to host connection, file transfer, electronic-mail, X.25, CATV etc.). 3. The development of applications -Electronic Document Approval and Delivery System, Installation the ORACLE Utility Program. 22 tabs., 12 figs. (Author) .new

Computer system operation

Energy Technology Data Exchange (ETDEWEB)

Lee, Young Jae; Lee, Hae Cho; Lee, Ho Yeun; Kim, Young Taek; Lee, Sung Kyu; Park, Jeong Suk; Nam, Ji Wha; Kim, Soon Kon; Yang, Sung Un; Sohn, Jae Min; Moon, Soon Sung; Park, Bong Sik; Lee, Byung Heon; Park, Sun Hee; Kim, Jin Hee; Hwang, Hyeoi Sun; Lee, Hee Ja; Hwang, In A [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1993-12-01

The report described the operation and the trouble shooting of main computer and KAERINet. The results of the project are as follows; 1. The operation and trouble shooting of the main computer system. (Cyber 170-875, Cyber 960-31, VAX 6320, VAX 11/780). 2. The operation and trouble shooting of the KAERINet. (PC to host connection, host to host connection, file transfer, electronic-mail, X.25, CATV etc.). 3. The development of applications -Electronic Document Approval and Delivery System, Installation the ORACLE Utility Program. 22 tabs., 12 figs. (Author) .new.

Computer-communication networks

CERN Document Server

Meditch, James S

1983-01-01

Computer- Communication Networks presents a collection of articles the focus of which is on the field of modeling, analysis, design, and performance optimization. It discusses the problem of modeling the performance of local area networks under file transfer. It addresses the design of multi-hop, mobile-user radio networks. Some of the topics covered in the book are the distributed packet switching queuing network design, some investigations on communication switching techniques in computer networks and the minimum hop flow assignment and routing subject to an average message delay constraint

Catching errors with patient-specific pretreatment machine log file analysis.

Science.gov (United States)

Rangaraj, Dharanipathy; Zhu, Mingyao; Yang, Deshan; Palaniswaamy, Geethpriya; Yaddanapudi, Sridhar; Wooten, Omar H; Brame, Scott; Mutic, Sasa

2013-01-01

A robust, efficient, and reliable quality assurance (QA) process is highly desired for modern external beam radiation therapy treatments. Here, we report the results of a semiautomatic, pretreatment, patient-specific QA process based on dynamic machine log file analysis clinically implemented for intensity modulated radiation therapy (IMRT) treatments delivered by high energy linear accelerators (Varian 2100/2300 EX, Trilogy, iX-D, Varian Medical Systems Inc, Palo Alto, CA). The multileaf collimator machine (MLC) log files are called Dynalog by Varian. Using an in-house developed computer program called "Dynalog QA," we automatically compare the beam delivery parameters in the log files that are generated during pretreatment point dose verification measurements, with the treatment plan to determine any discrepancies in IMRT deliveries. Fluence maps are constructed and compared between the delivered and planned beams. Since clinical introduction in June 2009, 912 machine log file analyses QA were performed by the end of 2010. Among these, 14 errors causing dosimetric deviation were detected and required further investigation and intervention. These errors were the result of human operating mistakes, flawed treatment planning, and data modification during plan file transfer. Minor errors were also reported in 174 other log file analyses, some of which stemmed from false positives and unreliable results; the origins of these are discussed herein. It has been demonstrated that the machine log file analysis is a robust, efficient, and reliable QA process capable of detecting errors originating from human mistakes, flawed planning, and data transfer problems. The possibility of detecting these errors is low using point and planar dosimetric measurements. Copyright © 2013 American Society for Radiation Oncology. Published by Elsevier Inc. All rights reserved.

A survey of castration methods and associated livestock management practices performed by bovine veterinarians in the United States.

Science.gov (United States)

Coetzee, Johann F; Nutsch, Abbey L; Barbur, Laura A; Bradburn, Ryan M

2010-03-03

Castration of male calves destined for beef production is a common management practice performed in the United States amounting to approximately 15 million procedures per year. Societal concern about the moral and ethical treatment of animals is increasing. Therefore, production agriculture is faced with the challenge of formulating animal welfare policies relating to routine management practices such as castration. To enable the livestock industry to effectively respond to these challenges there is a need for more data on management practices that are commonly used in cattle production systems. The objective of this survey was to describe castration methods, adverse events and husbandry procedures performed by U.S. veterinarians at the time of castration. Invitations to participate in the survey were sent to email addresses of 1,669 members of the American Association of Bovine Practitioners and 303 members of the Academy of Veterinary Consultants. After partially completed surveys and missing data were omitted, 189 responses were included in the analysis. Surgical castration with a scalpel followed by testicular removal by twisting (calves 90 kg) was the most common method of castration used. The potential risk of injury to the operator, size of the calf, handling facilities and experience with the technique were the most important considerations used to determine the method of castration used. Swelling, stiffness and increased lying time were the most prevalent adverse events observed following castration. One in five practitioners report using an analgesic or local anesthetic at the time of castration. Approximately 90% of respondents indicated that they vaccinate and dehorn calves at the time of castration. Over half the respondents use disinfectants, prophylactic antimicrobials and tetanus toxoid to reduce complications following castration. The results of this survey describe current methods of castration and associated management practices employed by

A survey of castration methods and associated livestock management practices performed by bovine veterinarians in the United States

Directory of Open Access Journals (Sweden)

Bradburn Ryan M

2010-03-01

Full Text Available Abstract Background Castration of male calves destined for beef production is a common management practice performed in the United States amounting to approximately 15 million procedures per year. Societal concern about the moral and ethical treatment of animals is increasing. Therefore, production agriculture is faced with the challenge of formulating animal welfare policies relating to routine management practices such as castration. To enable the livestock industry to effectively respond to these challenges there is a need for more data on management practices that are commonly used in cattle production systems. The objective of this survey was to describe castration methods, adverse events and husbandry procedures performed by U.S. veterinarians at the time of castration. Invitations to participate in the survey were sent to email addresses of 1,669 members of the American Association of Bovine Practitioners and 303 members of the Academy of Veterinary Consultants. Results After partially completed surveys and missing data were omitted, 189 responses were included in the analysis. Surgical castration with a scalpel followed by testicular removal by twisting (calves 90 kg was the most common method of castration used. The potential risk of injury to the operator, size of the calf, handling facilities and experience with the technique were the most important considerations used to determine the method of castration used. Swelling, stiffness and increased lying time were the most prevalent adverse events observed following castration. One in five practitioners report using an analgesic or local anesthetic at the time of castration. Approximately 90% of respondents indicated that they vaccinate and dehorn calves at the time of castration. Over half the respondents use disinfectants, prophylactic antimicrobials and tetanus toxoid to reduce complications following castration. Conclusions The results of this survey describe current methods of

Provider of Services File

Data.gov (United States)

U.S. Department of Health & Human Services — The POS file consists of two data files, one for CLIA labs and one for 18 other provider types. The file names are CLIA and OTHER. If downloading the file, note it...

Computer programs to make a Chart of the nuclides for WWW

International Nuclear Information System (INIS)

Nakagawa, Tsuneo; Katakura, Jun-ichi; Horiguchi, Takayoshi

1999-06-01

Computer programs to make a chart of the nuclides for World Wide Web (WWW) have been developed. The programs make a data file for WWW chart of the nuclides from a data file containing nuclide information in the format similar to ENSDF, by filling unknown half-lives with calculated ones. Then, the WWW chart of the nuclides in the gif format is created from the data file. The programs to make html files and image map files, to select a chart of selected nuclides, and to show various information of nuclides are included in the system. All the programs are written in C language. This report describes the formats of files, the programs and 1998 issue of Chart of the Nuclides made by means of the present programs. (author)

BALANCER: A Computer Program for Balancing Chemical Equations.

Science.gov (United States)

Jones, R. David; Schwab, A. Paul

1989-01-01

Describes the theory and operation of a computer program which was written to balance chemical equations. Software consists of a compiled file of 46K for use under MS-DOS 2.0 or later on IBM PC or compatible computers. Additional specifications of courseware and availability information are included. (Author/RT)

Text File Comparator

Science.gov (United States)

Kotler, R. S.

1983-01-01

File Comparator program IFCOMP, is text file comparator for IBM OS/VScompatable systems. IFCOMP accepts as input two text files and produces listing of differences in pseudo-update form. IFCOMP is very useful in monitoring changes made to software at the source code level.

Computer automation of a health physics program record

International Nuclear Information System (INIS)

Bird, E.M.; Flook, B.A.; Jarrett, R.D.

1984-01-01

A multi-user computer data base management system (DBMS) has been developed to automate USDA's national radiological safety program. It maintains information on approved users of radioactive material and radiation emanating equipment, as a central file which is accessed whenever information on the user is required. Files of inventory, personnel dosemetry records, laboratory and equipment surveys, leak tests, bioassay reports, and all other information are linked to each approved user by an assigned code that identifies the user by state, agency, and facility. The DBMS is menu-driven with provisions for addition, modification and report generation of information maintained in the system. This DBMS was designed as a single entry system to reduce the redundency of data entry. Prompts guide the user at decision points and data validation routines check for proper data entry. The DBMS generates lists of current inventories, leak test forms, inspection reports, scans for overdue reports from users, and generates follow-up letters. The DBMS system operates on a Wang OIS computer and utilizes its compiled BASIC, List Processing, Word Processing, and indexed (ISAM) file features. This system is a very fast relational database supporting many users simultaneously while providing several methods of data protection. All data files are compatible with List Processing. Information in these files can be examined, sorted, modified, or outputted to word processing documents using software supplied by Wang. This has reduced the need for special one-time programs and provides alternative access to the data

SLIB77, Source Library Data Compression and File Maintenance System

International Nuclear Information System (INIS)

Lunsford, A.

1989-01-01

Description of program or function: SLIB77 is a source librarian program designed to maintain FORTRAN source code in a compressed form on magnetic disk. The program was prepared to meet program maintenance requirements for ongoing program development and continual improvement of very large programs involving many programmers from a number of different organizations. SLIB77 automatically maintains in one file the source of the current program as well as all previous modifications. Although written originally for FORTRAN programs, SLIB77 is suitable for use with data files, text files, operating systems, and other programming languages, such as Ada, C and COBOL. It can handle libraries with records of up to 160-characters. Records are grouped into DECKS and assigned deck names by the user. SLIB77 assigns a number to each record in each DECK. Records can be deleted or restored singly or as a group within each deck. Modification records are grouped and assigned modification identification names by the user. The program assigns numbers to each new record within the deck. The program has two modes of execution, BATCH and EDIT. The BATCH mode is controlled by an input file and is used to make changes permanent and create new library files. The EDIT mode is controlled by interactive terminal input and a built-in line editor is used for modification of single decks. Transferring of a library from one computer system to another is accomplished using a Portable Library File created by SLIB77 in a BATCH run

Updates and solution to the 21st century computer virus sourge ...

African Journals Online (AJOL)

The computer virus scourge continues to be a problem the Information Technology (IT), industries must address. Computer virus is a malicious program codes, which can replicate and spread infections into large number of possible hosts and cause damage to computer programs, files, databases and data, in general.

76 FR 48811 - Computer Matching and Privacy Protection Act of 1988

Science.gov (United States)

2011-08-09

... CORPORATION FOR NATIONAL AND COMMUNITY SERVICE Computer Matching and Privacy Protection Act of... of the Computer Matching and Privacy Protection Act of 1988 (54 FR 25818, June 19, 1989), and OMB... Security Administration (``SSA''). DATES: CNCS will file a report on the computer matching agreement with...

Delivering LHC software to HPC compute elements

CERN Document Server

Blomer, Jakob; Hardi, Nikola; Popescu, Radu

2017-01-01

In recent years, there was a growing interest in improving the utilization of supercomputers by running applications of experiments at the Large Hadron Collider (LHC) at CERN when idle cores cannot be assigned to traditional HPC jobs. At the same time, the upcoming LHC machine and detector upgrades will produce some 60 times higher data rates and challenge LHC experiments to use so far untapped compute resources. LHC experiment applications are tailored to run on high-throughput computing resources and they have a different anatomy than HPC applications. LHC applications comprise a core framework that allows hundreds of researchers to plug in their specific algorithms. The software stacks easily accumulate to many gigabytes for a single release. New releases are often produced on a daily basis. To facilitate the distribution of these software stacks to world-wide distributed computing resources, LHC experiments use a purpose-built, global, POSIX file system, the CernVM File System. CernVM-FS pre-processes dat...

A computer case definition for sudden cardiac death.

Science.gov (United States)

Chung, Cecilia P; Murray, Katherine T; Stein, C Michael; Hall, Kathi; Ray, Wayne A

2010-06-01

To facilitate studies of medications and sudden cardiac death, we developed and validated a computer case definition for these deaths. The study of community dwelling Tennessee Medicaid enrollees 30-74 years of age utilized a linked database with Medicaid inpatient/outpatient files, state death certificate files, and a state 'all-payers' hospital discharge file. The computerized case definition was developed from a retrospective cohort study of sudden cardiac deaths occurring between 1990 and 1993. Medical records for 926 potential cases had been adjudicated for this study to determine if they met the clinical definition for sudden cardiac death occurring in the community and were likely to be due to ventricular tachyarrhythmias. The computerized case definition included deaths with (1) no evidence of a terminal hospital admission/nursing home stay in any of the data sources; (2) an underlying cause of death code consistent with sudden cardiac death; and (3) no terminal procedures inconsistent with unresuscitated cardiac arrest. This definition was validated in an independent sample of 174 adjudicated deaths occurring between 1994 and 2005. The positive predictive value of the computer case definition was 86.0% in the development sample and 86.8% in the validation sample. The positive predictive value did not vary materially for deaths coded according to the ICO-9 (1994-1998, positive predictive value = 85.1%) or ICD-10 (1999-2005, 87.4%) systems. A computerized Medicaid database, linked with death certificate files and a state hospital discharge database, can be used for a computer case definition of sudden cardiac death. Copyright (c) 2009 John Wiley & Sons, Ltd.

Status and evaluation methods of JENDL fusion file and JENDL PKA/KERMA file

International Nuclear Information System (INIS)

Chiba, S.; Fukahori, T.; Shibata, K.; Yu Baosheng; Kosako, K.

1997-01-01

The status of evaluated nuclear data in the JENDL fusion file and PKA/KERMA file is presented. The JENDL fusion file was prepared in order to improve the quality of the JENDL-3.1 data especially on the double-differential cross sections (DDXs) of secondary neutrons and gamma-ray production cross sections, and to provide DDXs of secondary charged particles (p, d, t, 3 He and α-particle) for the calculation of PKA and KERMA factors. The JENDL fusion file contains evaluated data of 26 elements ranging from Li to Bi. The data in JENDL fusion file reproduce the measured data on neutron and charged-particle DDXs and also on gamma-ray production cross sections. Recoil spectra in PKA/KERMA file were calculated from secondary neutron and charged-particle DDXs contained in the fusion file with two-body reaction kinematics. The data in the JENDL fusion file and PKA/KERMA file were compiled in ENDF-6 format with an MF=6 option to store the DDX data. (orig.)

Automated quality control in a file-based broadcasting workflow

Science.gov (United States)

Zhang, Lina

2014-04-01

Benefit from the development of information and internet technologies, television broadcasting is transforming from inefficient tape-based production and distribution to integrated file-based workflows. However, no matter how many changes have took place, successful broadcasting still depends on the ability to deliver a consistent high quality signal to the audiences. After the transition from tape to file, traditional methods of manual quality control (QC) become inadequate, subjective, and inefficient. Based on China Central Television's full file-based workflow in the new site, this paper introduces an automated quality control test system for accurate detection of hidden troubles in media contents. It discusses the system framework and workflow control when the automated QC is added. It puts forward a QC criterion and brings forth a QC software followed this criterion. It also does some experiments on QC speed by adopting parallel processing and distributed computing. The performance of the test system shows that the adoption of automated QC can make the production effective and efficient, and help the station to achieve a competitive advantage in the media market.

Development and validation of gui based input file generation code for relap

International Nuclear Information System (INIS)

Anwar, M.M.; Khan, A.A.; Chughati, I.R.; Chaudri, K.S.; Inyat, M.H.; Hayat, T.

2009-01-01

Reactor Excursion and Leak Analysis Program (RELAP) is a widely acceptable computer code for thermal hydraulics modeling of Nuclear Power Plants. It calculates thermal- hydraulic transients in water-cooled nuclear reactors by solving approximations to the one-dimensional, two-phase equations of hydraulics in an arbitrarily connected system of nodes. However, the preparation of input file and subsequent analysis of results in this code is a tedious task. The development of a Graphical User Interface (GUI) for preparation of the input file for RELAP-5 is done with the validation of GUI generated Input File. The GUI is developed in Microsoft Visual Studio using Visual C Sharp (C) as programming language. The Nodalization diagram is drawn graphically and the program contains various component forms along with the starting data form, which are launched for properties assignment to generate Input File Cards serving as GUI for the user. The GUI is provided with Open / Save function to store and recall the Nodalization diagram along with Components' properties. The GUI generated Input File is validated for several case studies and individual component cards are compared with the originally required format. The generated Input File of RELAP is found consistent with the requirement of RELAP. The GUI provided a useful platform for simulating complex hydrodynamic problems efficiently with RELAP. (author)

Virtual file system on NoSQL for processing high volumes of HL7 messages.

Science.gov (United States)

Kimura, Eizen; Ishihara, Ken

2015-01-01

The Standardized Structured Medical Information Exchange (SS-MIX) is intended to be the standard repository for HL7 messages that depend on a local file system. However, its scalability is limited. We implemented a virtual file system using NoSQL to incorporate modern computing technology into SS-MIX and allow the system to integrate local patient IDs from different healthcare systems into a universal system. We discuss its implementation using the database MongoDB and describe its performance in a case study.

European pet travel: misleading information from veterinarians and government agencies.

Science.gov (United States)

Davidson, R K; Robertson, L J

2012-12-01

Inter-country travel of companion animals provides an opportunity for introduction of zoonotic pathogens, such as rabies virus and Echinococcus spp. Regulations are in place to control this threat, but Schengen Agreements mean that border controls between some European countries are minimal, and animals may enter countries without any checks that they have been appropriately treated. Veterinarians provide an important source of information for people intending to travel with their pets. We conducted a telephone survey to investigate provision of correct advice to someone intending to travel with their dog to Norway. Mainland Norway is considered free of both rabies and E. multilocularis and is a signatory to the Schengen Agreement. Ten randomly selected veterinary clinics were surveyed in Austria, Belgium (Wallonia), Finland, France, Germany, Norway, Sweden, Switzerland and United Kingdom. The information provided was scored as correct, incorrect or incomplete. The information provided by secondary information sources (website or government agency), which the clinic had referred the caller to, was also assessed (correct, incorrect, incomplete). Whilst the majority of clinics provided appropriate information regarding rabies, many clinics did not provide correct information regarding treatment for E. multilocularis. Less than one in 10 clinics provided the correct information regarding both pathogens directly at the time of calling. The correct information was obtained, once taking into account secondary sources, just 62% of the time. Countrywise, most clinics in Finland provided correct advice, either directly or indirectly via referring the caller to another source, whilst the majority in Belgium, Germany and France did not. The apparent paucity of readily accessible, correct advice for owners intending to travel with their dogs is concerning. The compulsory treatment regulations are only as good as the checks that ensure compliance, and this is also lacking in

Implementing Journaling in a Linux Shared Disk File System

Science.gov (United States)

Preslan, Kenneth W.; Barry, Andrew; Brassow, Jonathan; Cattelan, Russell; Manthei, Adam; Nygaard, Erling; VanOort, Seth; Teigland, David; Tilstra, Mike; O'Keefe, Matthew;

The Development of an Interactive Computer-Based Training Program for Timely and Humane On-Farm Pig Euthanasia.

Science.gov (United States)

Mullins, Caitlyn R; Pairis-Garcia, Monique D; Campler, Magnus R; Anthony, Raymond; Johnson, Anna K; Coleman, Grahame J; Rault, Jean-Loup

2018-02-05

With extensive knowledge and training in the prevention, management, and treatment of disease conditions in animals, veterinarians play a critical role in ensuring good welfare on swine farms by training caretakers on the importance of timely euthanasia. To assist veterinarians and other industry professionals in training new and seasoned caretakers, an interactive computer-based training program was created. It consists of three modules, each containing five case studies, which cover three distinct production stages (breeding stock, piglets, and wean to grower-finisher pigs). Case study development was derived from five specific euthanasia criteria defined in the 2015 Common Swine Industry Audit, a nationally recognized auditing program used in the US. Case studies provide information regarding treatment history, clinical signs, and condition severity of the pig and prompt learners to make management decisions regarding pig treatment and care. Once a decision is made, feedback is provided so learners understand the appropriateness of their decision compared to current industry guidelines. In addition to training farm personnel, this program may also be a valuable resource if incorporated into veterinary, graduate, and continuing education curricula. This innovative tool represents the first interactive euthanasia-specific training program in the US swine industry and offers the potential to improve timely and humane on-farm pig euthanasia.

CINDA 99, supplement 2 to CINDA 97 (1988-1999). The index to literature and computer files on microscopic neutron data

International Nuclear Information System (INIS)

1999-01-01

CINDA, the Computer Index of Neutron Data, contains bibliographical references to measurements, calculations, reviews and evaluations of neutron cross-sections and other microscopic neutron data; it includes also index references to computer libraries of numerical neutron data available from four regional neutron data centres. The present issue, CINDA 99, is the second supplement to CINDA 97, the index to the literature on neutron data published after 1987. It supersedes the first supplement, CINDA 98. The complete CINDA file as of 1 June 1999 is contained in: the archival issue CINDA-A (5 volumes, 1990), CINDA 97 and the current issue CINDA 99. The compilation and publication of CINDA are the result of worldwide co-operation involving the following four data centres. Each centre is responsible for compiling the CINDA entries from the literature published in a defined geographical area given in brackets below: the USA National Nuclear Data Center at the Brookhaven National Laboratory, USA (United States of America and Canada); the Russian Nuclear Data Centre at the Fiziko-Energeticheskij Institut, Obninsk, Russian Federation (former USSR countries); the NEA Data Bank in Paris, France (European OECD member countries in Western Europe and Japan); and the IAEA Nuclear Data Section in Vienna, Austria (all other countries in Eastern Europe, Asia, Australia, Africa, Central and South America; also IAEA publications and translation journals). Besides the published CINDA books, up-to-date computer retrievals for specified CINDA information are currently available on request from the responsible CINDA centres, or via direct access to the on-line services as described in this publication

New FORTRAN computer programs to acquire and process isotopic mass-spectrometric data

International Nuclear Information System (INIS)

Smith, D.H.

1982-08-01

The computer programs described in New Computer Programs to Acquire and Process Isotopic Mass Spectrometric Data have been revised. This report describes in some detail the operation of these programs, which acquire and process isotopic mass spectrometric data. Both functional and overall design aspects are addressed. The three basic program units - file manipulation, data acquisition, and data processing - are discussed in turn. Step-by-step instructions are included where appropriate, and each subsection is described in enough detail to give a clear picture of its function. Organization of file structure, which is central to the entire concept, is extensively discussed with the help of numerous tables. Appendices contain flow charts and outline file structure to help a programmer unfamiliar with the programs to alter them with a minimum of lost time

Efficient analysis and extraction of MS/MS result data from Mascot™ result files

Directory of Open Access Journals (Sweden)

Sickmann Albert

2005-12-01

Full Text Available Abstract Background Mascot™ is a commonly used protein identification program for MS as well as for tandem MS data. When analyzing huge shotgun proteomics datasets with Mascot™'s native tools, limits of computing resources are easily reached. Up to now no application has been available as open source that is capable of converting the full content of Mascot™ result files from the original MIME format into a database-compatible tabular format, allowing direct import into database management systems and efficient handling of huge datasets analyzed by Mascot™. Results A program called mres2x is presented, which reads Mascot™ result files, analyzes them and extracts either selected or all information in order to store it in a single file or multiple files in formats which are easier to handle downstream of Mascot™. It generates different output formats. The output of mres2x in tab format is especially designed for direct high-performance import into relational database management systems using native tools of these systems. Having the data available in database management systems allows complex queries and extensive analysis. In addition, the original peak lists can be extracted in DTA format suitable for protein identification using the Sequest™ program, and the Mascot™ files can be split, preserving the original data format. During conversion, several consistency checks are performed. mres2x is designed to provide high throughput processing combined with the possibility to be driven by other computer programs. The source code including supplement material and precompiled binaries is available via http://www.protein-ms.de and http://sourceforge.net/projects/protms/. Conclusion The database upload allows regrouping of the MS/MS results using a database management system and complex analyzing queries using SQL without the need to run new Mascot™ searches when changing grouping parameters.

A Metadata-Rich File System

Energy Technology Data Exchange (ETDEWEB)

Ames, S; Gokhale, M B; Maltzahn, C

2009-01-07

Despite continual improvements in the performance and reliability of large scale file systems, the management of file system metadata has changed little in the past decade. The mismatch between the size and complexity of large scale data stores and their ability to organize and query their metadata has led to a de facto standard in which raw data is stored in traditional file systems, while related, application-specific metadata is stored in relational databases. This separation of data and metadata requires considerable effort to maintain consistency and can result in complex, slow, and inflexible system operation. To address these problems, we have developed the Quasar File System (QFS), a metadata-rich file system in which files, metadata, and file relationships are all first class objects. In contrast to hierarchical file systems and relational databases, QFS defines a graph data model composed of files and their relationships. QFS includes Quasar, an XPATH-extended query language for searching the file system. Results from our QFS prototype show the effectiveness of this approach. Compared to the defacto standard, the QFS prototype shows superior ingest performance and comparable query performance on user metadata-intensive operations and superior performance on normal file metadata operations.

New thermal neutron scattering files for ENDF/B-VI release 2

International Nuclear Information System (INIS)

MacFarlane, R.E.

1994-03-01

At thermal neutron energies, the binding of the scattering nucleus in a solid, liquid, or gas affects the cross section and the distribution of secondary neutrons. These effects are described in the thermal sub-library of Version VI of the Evaluated Nuclear Data Files (ENDF/B-VI) using the File 7 format. In the original release of the ENDF/B-VI library, the data in File 7 were obtained by converting the thermal scattering evaluations of ENDF/B-III to the ENDF-6 format. These original evaluations were prepared at General Atomics (GA) in the late sixties, and they suffer from accuracy limitations imposed by the computers of the day. This report describes new evaluations for six of the thermal moderator materials and six new cold moderator materials. The calculations were made with the LEAPR module of NJOY, which uses methods based on the British code LEAP, together with the original GA physics models, to obtain new ENDF files that are accurate over a wider range of energy and momentum transfer than the existing files. The new materials are H in H 2 O, Be metal, Be in BeO, C in graphite, H in ZrH, Zr in ZrH, liquid ortho-hydrogen, liquid para-hydrogen, liquid ortho-deuterium, liquid para-deuterium liquid methane, and solid methane

ArrayBridge: Interweaving declarative array processing with high-performance computing

Energy Technology Data Exchange (ETDEWEB)

Xing, Haoyuan [The Ohio State Univ., Columbus, OH (United States); Floratos, Sofoklis [The Ohio State Univ., Columbus, OH (United States); Blanas, Spyros [The Ohio State Univ., Columbus, OH (United States); Byna, Suren [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Prabhat, Prabhat [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wu, Kesheng [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Brown, Paul [Paradigm4, Inc., Waltham, MA (United States)

2017-05-04

Scientists are increasingly turning to datacenter-scale computers to produce and analyze massive arrays. Despite decades of database research that extols the virtues of declarative query processing, scientists still write, debug and parallelize imperative HPC kernels even for the most mundane queries. This impedance mismatch has been partly attributed to the cumbersome data loading process; in response, the database community has proposed in situ mechanisms to access data in scientific file formats. Scientists, however, desire more than a passive access method that reads arrays from files. This paper describes ArrayBridge, a bi-directional array view mechanism for scientific file formats, that aims to make declarative array manipulations interoperable with imperative file-centric analyses. Our prototype implementation of ArrayBridge uses HDF5 as the underlying array storage library and seamlessly integrates into the SciDB open-source array database system. In addition to fast querying over external array objects, ArrayBridge produces arrays in the HDF5 file format just as easily as it can read from it. ArrayBridge also supports time travel queries from imperative kernels through the unmodified HDF5 API, and automatically deduplicates between array versions for space efficiency. Our extensive performance evaluation in NERSC, a large-scale scientific computing facility, shows that ArrayBridge exhibits statistically indistinguishable performance and I/O scalability to the native SciDB storage engine.

PHREEQCI; a graphical user interface for the geochemical computer program PHREEQC

Science.gov (United States)

Charlton, Scott R.; Macklin, Clifford L.; Parkhurst, David L.

1997-01-01

PhreeqcI is a Windows-based graphical user interface for the geochemical computer program PHREEQC. PhreeqcI provides the capability to generate and edit input data files, run simulations, and view text files containing simulation results, all within the framework of a single interface. PHREEQC is a multipurpose geochemical program that can perform speciation, inverse, reaction-path, and 1D advective reaction-transport modeling. Interactive access to all of the capabilities of PHREEQC is available with PhreeqcI. The interface is written in Visual Basic and will run on personal computers under the Windows(3.1), Windows95, and WindowsNT operating systems.

Parallel checksumming of data chunks of a shared data object using a log-structured file system

Science.gov (United States)

Bent, John M.; Faibish, Sorin; Grider, Gary

2016-09-06

Checksum values are generated and used to verify the data integrity. A client executing in a parallel computing system stores a data chunk to a shared data object on a storage node in the parallel computing system. The client determines a checksum value for the data chunk; and provides the checksum value with the data chunk to the storage node that stores the shared object. The data chunk can be stored on the storage node with the corresponding checksum value as part of the shared object. The storage node may be part of a Parallel Log-Structured File System (PLFS), and the client may comprise, for example, a Log-Structured File System client on a compute node or burst buffer. The checksum value can be evaluated when the data chunk is read from the storage node to verify the integrity of the data that is read.

HUD GIS Boundary Files

Data.gov (United States)

Department of Housing and Urban Development — The HUD GIS Boundary Files are intended to supplement boundary files available from the U.S. Census Bureau. The files are for community planners interested in...

Code 672 observational science branch computer networks

Science.gov (United States)

Hancock, D. W.; Shirk, H. G.

1988-01-01

In general, networking increases productivity due to the speed of transmission, easy access to remote computers, ability to share files, and increased availability of peripherals. Two different networks within the Observational Science Branch are described in detail.

Cloud Computing Cryptography "State-of-the-Art"

OpenAIRE

Omer K. Jasim; Safia Abbas; El-Sayed M. El-Horbaty; Abdel-Badeeh M. Salem

2013-01-01

Cloud computing technology is very useful in present day to day life, it uses the internet and the central remote servers to provide and maintain data as well as applications. Such applications in turn can be used by the end users via the cloud communications without any installation. Moreover, the end users’ data files can be accessed and manipulated from any other computer using the internet services. Despite the flexibility of data and application accessing and usage that cloud computing e...

Migrating Educational Data and Services to Cloud Computing: Exploring Benefits and Challenges

Science.gov (United States)

Lahiri, Minakshi; Moseley, James L.

2013-01-01

"Cloud computing" is currently the "buzzword" in the Information Technology field. Cloud computing facilitates convenient access to information and software resources as well as easy storage and sharing of files and data, without the end users being aware of the details of the computing technology behind the process. This…

33 CFR 148.246 - When is a document considered filed and where should I file it?

Science.gov (United States)

2010-07-01

... filed and where should I file it? 148.246 Section 148.246 Navigation and Navigable Waters COAST GUARD... Formal Hearings § 148.246 When is a document considered filed and where should I file it? (a) If a document to be filed is submitted by mail, it is considered filed on the date it is postmarked. If a...

Collection Of Software For Computer Graphics

Science.gov (United States)

Hibbard, Eric A.; Makatura, George

1990-01-01

Ames Research Graphics System (ARCGRAPH) collection of software libraries and software utilities assisting researchers in generating, manipulating, and visualizing graphical data. Defines metafile format containing device-independent graphical data. File format used with various computer-graphics-manipulation and -animation software packages at Ames, including SURF (COSMIC Program ARC-12381) and GAS (COSMIC Program ARC-12379). Consists of two-stage "pipeline" used to put out graphical primitives. ARCGRAPH libraries developed on VAX computer running VMS.

Approaches in highly parameterized inversion-PESTCommander, a graphical user interface for file and run management across networks

Science.gov (United States)

Karanovic, Marinko; Muffels, Christopher T.; Tonkin, Matthew J.; Hunt, Randall J.

2012-01-01

Models of environmental systems have become increasingly complex, incorporating increasingly large numbers of parameters in an effort to represent physical processes on a scale approaching that at which they occur in nature. Consequently, the inverse problem of parameter estimation (specifically, model calibration) and subsequent uncertainty analysis have become increasingly computation-intensive endeavors. Fortunately, advances in computing have made computational power equivalent to that of dozens to hundreds of desktop computers accessible through a variety of alternate means: modelers have various possibilities, ranging from traditional Local Area Networks (LANs) to cloud computing. Commonly used parameter estimation software is well suited to take advantage of the availability of such increased computing power. Unfortunately, logistical issues become increasingly important as an increasing number and variety of computers are brought to bear on the inverse problem. To facilitate efficient access to disparate computer resources, the PESTCommander program documented herein has been developed to provide a Graphical User Interface (GUI) that facilitates the management of model files ("file management") and remote launching and termination of "slave" computers across a distributed network of computers ("run management"). In version 1.0 described here, PESTCommander can access and ascertain resources across traditional Windows LANs: however, the architecture of PESTCommander has been developed with the intent that future releases will be able to access computing resources (1) via trusted domains established in Wide Area Networks (WANs) in multiple remote locations and (2) via heterogeneous networks of Windows- and Unix-based operating systems. The design of PESTCommander also makes it suitable for extension to other computational resources, such as those that are available via cloud computing. Version 1.0 of PESTCommander was developed primarily to work with the

Protecting your files on the DFS file system

CERN Multimedia

Computer Security Team

2011-01-01

The Windows Distributed File System (DFS) hosts user directories for all NICE users plus many more data.    Files can be accessed from anywhere, via a dedicated web portal (http://cern.ch/dfs). Due to the ease of access to DFS with in CERN it is of utmost importance to properly protect access to sensitive data. As the use of DFS access control mechanisms is not obvious to all users, passwords, certificates or sensitive files might get exposed. At least this happened in past to the Andrews File System (AFS) - the Linux equivalent to DFS) - and led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed recently to apply more stringent protections to all DFS user folders. The goal of this data protection policy is to assist users in pro...

Protecting your files on the AFS file system

CERN Multimedia

2011-01-01

The Andrew File System is a world-wide distributed file system linking hundreds of universities and organizations, including CERN. Files can be accessed from anywhere, via dedicated AFS client programs or via web interfaces that export the file contents on the web. Due to the ease of access to AFS it is of utmost importance to properly protect access to sensitive data in AFS. As the use of AFS access control mechanisms is not obvious to all users, passwords, private SSH keys or certificates have been exposed in the past. In one specific instance, this also led to bad publicity due to a journalist accessing supposedly "private" AFS folders (SonntagsZeitung 2009/11/08). This problem does not only affect the individual user but also has a bad impact on CERN's reputation when it comes to IT security. Therefore, all departments and LHC experiments agreed in April 2010 to apply more stringent folder protections to all AFS user folders. The goal of this data protection policy is to assist users in...

Instructions for preparation of data entry sheets for Licensee Event Report (LER) file. Revision 1. Instruction manual

International Nuclear Information System (INIS)

1977-07-01

The manual provides instructions for the preparation of data entry sheets for the licensee event report (LER) file. It is a revision to an interim manual published in October 1974 in 00E-SS-001. The LER file is a computer-based data bank of information using the data entry sheets as input. These data entry sheets contain pertinent information in regard to those occurrences required to be reported to the NRC. The computer-based data bank provides a centralized source of data that may be used for qualitative assessment of the nature and extent of off-normal events in the nuclear industry and as an index of source information to which users may refer for more detail

Direct utilization of information from nuclear data files in Monte Carlo simulation of neutron and photon transport

International Nuclear Information System (INIS)

Androsenko, P.; Joloudov, D.; Kompaniyets, A.

2001-01-01

Questions, related to Monte-Carlo method for solution of neutron and photon transport equation, are discussed in the work concerned. Problems dealing with direct utilization of information from evaluated nuclear data files in run-time calculations are considered. ENDF-6 format libraries have been used for calculations. Approaches provided by the rules of ENDF-6 files 2, 3-6, 12-15, 23, 27 and algorithms for reconstruction of resolved and unresolved resonance region cross sections under preset energy are described. The comparison results of calculations made by NJOY and GRUCON programs and computed cross sections data are represented. Test computation data of neutron leakage spectra for spherical benchmark-experiments are also represented. (authors)

The design and analysis of salmonid tagging studies in the Columbia Basin. Volume 10: Instructional guide to using program CaptHist to create SURPH files for survival analysis using PTAGIS data files

International Nuclear Information System (INIS)

Westhagen, P.; Skalski, J.

1997-12-01

The SURPH program is a valuable tool for estimating survivals and capture probabilities of fish outmigrations on the Snake and Columbia Rivers. Using special data files, SURPH computes reach to reach statistics for any release group passing a system of detection sites. Because the data must be recorded for individual fish, PIT tag data is best suited for use as input. However, PIT tag data as available from PTAGIS comes in a form that is not ready for use as SURPH input. SURPH requires a capture history for each fish. A capture history consists of a series of fields, one for each detection site, that has a code for whether the fish was detected and returned to the river, detected and removed, or not detected. For the PTAGIS data to be usable by SURPH it must be pre-processed. The data must be condensed down to one line per fish with the relevant detection information from the PTAGIS file represented compactly on each line. In addition, the PTAGIS data file coil information must be passed through a series of logic algorithms to determine whether or not a fish is returned to the river after detection. Program CaptHist was developed to properly pre-process the PTAGIS data files for input to program SURPH. This utility takes PTAGIS data files as input and creates a SURPH data file as well as other output including travel time records, detection date records, and a data error file. CaptHist allows a user to download PTAGIS files and easily process the data for use with SURPH

A performance analysis of advanced I/O architectures for PC-based network file servers

Science.gov (United States)

Huynh, K. D.; Khoshgoftaar, T. M.

1994-12-01

In the personal computing and workstation environments, more and more I/O adapters are becoming complete functional subsystems that are intelligent enough to handle I/O operations on their own without much intervention from the host processor. The IBM Subsystem Control Block (SCB) architecture has been defined to enhance the potential of these intelligent adapters by defining services and conventions that deliver command information and data to and from the adapters. In recent years, a new storage architecture, the Redundant Array of Independent Disks (RAID), has been quickly gaining acceptance in the world of computing. In this paper, we would like to discuss critical system design issues that are important to the performance of a network file server. We then present a performance analysis of the SCB architecture and disk array technology in typical network file server environments based on personal computers (PCs). One of the key issues investigated in this paper is whether a disk array can outperform a group of disks (of same type, same data capacity, and same cost) operating independently, not in parallel as in a disk array.

Computer-aided preparation of specifications for radial fans at VEB Lufttechnische Anlagen Berlin

Energy Technology Data Exchange (ETDEWEB)

Kubis, R.; Kull, W.

1987-01-01

The specification details the scope of delivery for radial fans on a standard page and also serves the preparation for production. In the place of previous manual preparation, a computer-aided technique for the office computer is presented that provides the technical parameters from data files out of few input data to identify the fan type. The data files and evaluative programs are based on the software tool REDABAS and the SCP operating system. Using this technique it has been possible to cut considerably the preparation time for the incoming orders.

Performance Evaluation of Various STL File Mesh Refining Algorithms Applied for FDM-RP Process

Science.gov (United States)

Ledalla, Siva Rama Krishna; Tirupathi, Balaji; Sriram, Venkatesh

2018-06-01

Layered manufacturing machines use the stereolithography (STL) file to build parts. When a curved surface is converted from a computer aided design (CAD) file to STL, it results in a geometrical distortion and chordal error. Parts manufactured with this file, might not satisfy geometric dimensioning and tolerance requirements due to approximated geometry. Current algorithms built in CAD packages have export options to globally reduce this distortion, which leads to an increase in the file size and pre-processing time. In this work, different mesh subdivision algorithms are applied on STL file of a complex geometric features using MeshLab software. The mesh subdivision algorithms considered in this work are modified butterfly subdivision technique, loops sub division technique and general triangular midpoint sub division technique. A comparative study is made with respect to volume and the build time using the above techniques. It is found that triangular midpoint sub division algorithm is more suitable for the geometry under consideration. Only the wheel cap part is then manufactured on Stratasys MOJO FDM machine. The surface roughness of the part is measured on Talysurf surface roughness tester.

Business and computing : Bridging the gap

International Nuclear Information System (INIS)

Gordon, B.; Coles, F.C.

1999-01-01

Information systems, in the form of paper files or electronic files on computer systems and digital storage devices are employed in the oil industry to handle data from 3 basic infrastructures: accounting, geotechnical, and administration. The accounting function was the main driving force behind the development of the computer. The geotechnical data storage and manipulation infrastructure has its basis in signal recording and processing related to seismic acquisition and well logging. The administrative infrastructure deals with documents and not just data. Management in the oil industry needs two main kinds of useful information: reports about their organization and about the marketplace. Using an example of an oil and gas enterprise whose aim is to pursue low cost shallow gas to increase production levels, the basic business process is shown to relate to land and prospect inventory management, tightly controlled drilling methods, gathering system and production facility standardization, logistics and planning models, and strong transportation and marketing management. The role of the computer in this process is to yield information, that is, to provide coordinated, integrated, useful information that facilitates the processes essential to accomplish the business's objectives

JENDL Dosimetry File

International Nuclear Information System (INIS)

Nakazawa, Masaharu; Iguchi, Tetsuo; Kobayashi, Katsuhei; Iwasaki, Shin; Sakurai, Kiyoshi; Ikeda, Yujiro; Nakagawa, Tsuneo.

1992-03-01

The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d, n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form. (author) 76 refs

JENDL Dosimetry File

Energy Technology Data Exchange (ETDEWEB)

Nakazawa, Masaharu; Iguchi, Tetsuo [Tokyo Univ. (Japan). Faculty of Engineering; Kobayashi, Katsuhei [Kyoto Univ., Kumatori, Osaka (Japan). Research Reactor Inst.; Iwasaki, Shin [Tohoku Univ., Sendai (Japan). Faculty of Engineering; Sakurai, Kiyoshi; Ikeda, Yujior; Nakagawa, Tsuneo [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1992-03-15

The JENDL Dosimetry File based on JENDL-3 was compiled and integral tests of cross section data were performed by the Dosimetry Integral Test Working Group of the Japanese Nuclear Data Committee. Data stored in the JENDL Dosimetry File are the cross sections and their covariance data for 61 reactions. The cross sections were mainly taken from JENDL-3 and the covariances from IRDF-85. For some reactions, data were adopted from other evaluated data files. The data are given in the neutron energy region below 20 MeV in both of point-wise and group-wise files in the ENDF-5 format. In order to confirm reliability of the data, several integral tests were carried out; comparison with the data in IRDF-85 and average cross sections measured in fission neutron fields, fast reactor spectra, DT neutron fields and Li(d,n) neutron fields. As a result, it has been found that the JENDL Dosimetry File gives better results than IRDF-85 but there are some problems to be improved in future. The contents of the JENDL Dosimetry File and the results of the integral tests are described in this report. All of the dosimetry cross sections are shown in a graphical form.

[The role of the practicing veterinarian in the integrated monitoring of the meat production chain].

Science.gov (United States)

Brand, A; Wierda, A; van der Valk, P C; Vandenbooren, J C

1984-04-01

A more extensive knowledge of the state of health of animals intended for slaughter during the period between birth and transportation to the slaughter-house, is essential to public health, particularly as regards the incidence of zoonoses and administration of drugs. In an integrated system of surveillance of the animal and meat production chain, it will be the duty of the veterinary practitioner to supervise the health of the animals by preventive and curative measures. This system should involve an exchange of information between producer, slaughter-house, veterinarians, those who give guidance on agricultural matters, supervising bodies and research institutes. The stock farmer will keep a record of disease or signs of disease and the use of drugs and submit a health report on delivery of animals to be slaughtered. By herd health programmes, carried out by the veterinary practitioner, optimum health, production and well-being should be achieved. A herd health programme includes objectives, material and methods, evaluation, analysis and advice. On the basis of the results of herd health programmes, the producer of animals intended for slaughter will be able to meet the requirements of the system of surveillance of the animal and meat production chain.

Methods for the development of large computer codes under LTSS

International Nuclear Information System (INIS)

Sicilian, J.M.

1977-06-01

TRAC is a large computer code being developed by Group Q-6 for the analysis of the transient thermal hydraulic behavior of light-water nuclear reactors. A system designed to assist the development of TRAC is described. The system consists of a central HYDRA dataset, R6LIB, containing files used in the development of TRAC, and a file maintenance program, HORSE, which facilitates the use of this dataset

Installation and management of the SPS and LEP control system computers

International Nuclear Information System (INIS)

Bland, Alastair

1994-01-01

Control of the CERN SPS and LEP accelerators and service equipment on the two CERN main sites is performed via workstations, file servers, Process Control Assemblies (PCAs) and Device Stub Controllers (DSCs). This paper describes the methods and tools that have been developed to manage the file servers, PCAs and DSCs since the LEP startup in 1989. There are five operational DECstation 5000s used as file servers and boot servers for the PCAs and DSCs. The PCAs consist of 90 SCO Xenix 386 PCs, 40 LynxOS 486 PCs and more than 40 older NORD 100s. The DSCs consist of 90 OS-968030 VME crates and 10 LynxOS 68030 VME crates. In addition there are over 100 development systems. The controls group is responsible for installing the computers, starting all the user processes and ensuring that the computers and the processes run correctly. The operators in the SPS/LEP control room and the Services control room have a Motif-based X window program which gives them, in real time, the state of all the computers and allows them to solve problems or reboot them. ((orig.))

Use of DBMS-10 for storage and retrieval of evaluated nuclear data files

International Nuclear Information System (INIS)

Dunford, C.L.

1977-01-01

The use of a data base management system (DBMS) for storage of, and retrieval from, the many scientific data bases maintained by the National Nuclear Data Center is currently being investigated. It would appear that a commercially available DBMS package would save the Center considerable money and manpower when adding new data files to the library and in the long-term maintenance of current data files. Current DBMS technology and experience with an internal DBMS system suggests an inherent inefficiency in processing large data networks where significant portions are accessed in a sequential manner. Such a file is the Evaluated Nuclear Data File (ENDF/B), which contains many large data tables, each one normally accessed in a sequential manner. After gaining some experience and success in small applications of the commercially available DBMS package, DBMS-10, on the Center's DECsystem-10 computer, it was decided to select a large data base as a test case before making a final decision on the implementation of DBMS-10 for all data bases. The obvious approach is to utilize the DBMS to index a random-access file. In this way one is able to increase the storage and retrieval efficiency at the one-time cost of additional programing effort. 2 figures

Use of DBMS-10 for storage and retrieval of evaluated nuclear data files

International Nuclear Information System (INIS)

Dunford, C.L.

1978-01-01

The use of a data base management system (DBMS) for storage of, and retrieval from, the many scientific data bases maintained by the National Nuclear Data Center is currently being investigated. It would appear that a commercially available DBMS package would save the Center considerable money and manpower when adding new data files to our library and in the long-term maintenance of our current data files. Current DBMS technology and experience with our internal DBMS system suggests an inherent inefficiency in processing large data networks where significant portions are accessed in a sequential manner. Such a file is the Evaluated Nuclear Data File (ENDF/B) which contains many large data tables, each one normally accessed in a sequential manner. After gaining some experience and success in small applications of the commercially available DBMS package, DBMS-10, on the Center's DECsystem-10 computer, it was decided to select one of our large data bases as a test case before making a final decision on the implementation of DBMS-10 for all our data bases. The obvious approach is to utilize the DBMS to index a random access file. In this way one is able to increase the storage and retrieval efficiency at the one-time cost of additional programming effort

DJFS: Providing Highly Reliable and High‐Performance File System with Small‐Sized

Directory of Open Access Journals (Sweden)

Junghoon Kim

2017-11-01

Full Text Available File systems and applications try to implement their own update protocols to guarantee data consistency, which is one of the most crucial aspects of computing systems. However, we found that the storage devices are substantially under‐utilized when preserving data consistency because they generate massive storage write traffic with many disk cache flush operations and force‐unit‐access (FUA commands. In this paper, we present DJFS (Delta‐Journaling File System that provides both a high level of performance and data consistency for different applications. We made three technical contributions to achieve our goal. First, to remove all storage accesses with disk cache flush operations and FUA commands, DJFS uses small‐sized NVRAM for a file system journal. Second, to reduce the access latency and space requirements of NVRAM, DJFS attempts to journal compress the differences in the modified blocks. Finally, to relieve explicit checkpointing overhead, DJFS aggressively reflects the checkpoint transactions to file system area in the unit of the specified region. Our evaluation on TPC‐C SQLite benchmark shows that, using our novel optimization schemes, DJFS outperforms Ext4 by up to 64.2 times with only 128 MB of NVRAM.

Managing Laboratory Data Using Cloud Computing as an Organizational Tool

Science.gov (United States)

Bennett, Jacqueline; Pence, Harry E.

2011-01-01

One of the most significant difficulties encountered when directing undergraduate research and developing new laboratory experiments is how to efficiently manage the data generated by a number of students. Cloud computing, where both software and computer files reside online, offers a solution to this data-management problem and allows researchers…

A File Archival System

Science.gov (United States)

Fanselow, J. L.; Vavrus, J. L.

1984-01-01

ARCH, file archival system for DEC VAX, provides for easy offline storage and retrieval of arbitrary files on DEC VAX system. System designed to eliminate situations that tie up disk space and lead to confusion when different programers develop different versions of same programs and associated files.

PETRI NET MODELING OF COMPUTER VIRUS LIFE CYCLE

African Journals Online (AJOL)

Dr Obe

dynamic system analysis is applied to model the virus life cycle. Simulation of the derived model ... Keywords: Virus lifecycle, Petri nets, modeling. simulation. .... complex process. Figure 2 .... by creating Matlab files for five different computer ...

Comparative evaluation of debris extruded apically by using, Protaper retreatment file, K3 file and H-file with solvent in endodontic retreatment

Directory of Open Access Journals (Sweden)

Chetna Arora

2012-01-01

Full Text Available Aim: The aim of this study was to evaluate the apical extrusion of debris comparing 2 engine driven systems and hand instrumentation technique during root canal retreatment. Materials and Methods: Forty five human permanent mandibular premolars were prepared using the step-back technique, obturated with gutta-percha/zinc oxide eugenol sealer and cold lateral condensation technique. The teeth were divided into three groups: Group A: Protaper retreatment file, Group B: K3, file Group C: H-file with tetrachloroethylene. All the canals were irrigated with 20ml distilled water during instrumentation. Debris extruded along with the irrigating solution during retreatment procedure was carefully collected in preweighed Eppendorf tubes. The tubes were stored in an incubator for 5 days, placed in a desiccator and then re-weighed. Weight of dry debris was calculated by subtracting the weight of the tube before instrumentation and from the weight of the tube after instrumentation. Data was analyzed using Two Way ANOVA and Post Hoc test. Results : There was statistically significant difference in the apical extrusion of debris between hand instrumentation and protaper retreatment file and K3 file. The amount of extruded debris caused by protaper retreatment file and K3 file instrumentation technique was not statistically significant. All the three instrumentation techniques produced apically extruded debris and irrigant. Conclusion: The best way to minimize the extrusion of debris is by adapting crown down technique therefore the use of rotary technique (Protaper retreatment file, K3 file is recommended.

Development of a script for converting DICOM files to .TXT; Desenvolvimento de um script para conversao de arquivos DICOM para .TXT

Energy Technology Data Exchange (ETDEWEB)

Abrantes, Marcos E.S.; Oliveira, A.H. de, E-mail: marcosabrantes2003@yahoo.com.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear; Abrantes, R.C., E-mail: abrantes.rafa1@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Eletrica; Magalhaes, M.J., E-mail: mjuliano100@yahoo.com.br [Ambienttal Protecao Radiologica, Belo Horizonte, MG (Brazil)

2014-07-01

Background: with the increased use of computer simulation techniques for diagnosis or therapy in patients, the MCNP and SCMS software is being widely used. For use as SCMS data entry interface for the MCNP is necessary to perform transformation of DICOM images to text files. Objective: to produce a semi automatic script conversion DICOM images generated by Computerized Tomography or Magnetic Resonance, for .txt in the IMAGEJ software. Methodology: this study was developed in the IMAGEJ software platform with an Intel Core 2 Duo computer, CPU of 2.00GHz, with 2:00 GB of RAM for 32-bit system. Development of the script was held in a text editor using JAVA language. For script insertion in IMAGEJ the plug in tool of this software was used. After this, a window is open asking for the path of the files that will be read, first and last name of DICOM file to be converted, along with where the new files will be stored. Results: for the manual processing of DICOM conversion to .txt of cerebral computed tomography with 600 images requires a time of about 8 hours. The use of script allows conversion time reduction for 12 minutes. Conclusion: the script used demonstrates DICOM conversion ability to .txt and a significant improvement in time savings in processing.

Improving CMS data transfers among its distributed computing facilities

CERN Document Server

Flix, J; Sartirana, A

2001-01-01

CMS computing needs reliable, stable and fast connections among multi-tiered computing infrastructures. For data distribution, the CMS experiment relies on a data placement and transfer system, PhEDEx, managing replication operations at each site in the distribution network. PhEDEx uses the File Transfer Service (FTS), a low level data movement service responsible for moving sets of files from one site to another, while allowing participating sites to control the network resource usage. FTS servers are provided by Tier-0 and Tier-1 centres and are used by all computing sites in CMS, according to the established policy. FTS needs to be set up according to the Grid site's policies, and properly configured to satisfy the requirements of all Virtual Organizations making use of the Grid resources at the site. Managing the service efficiently requires good knowledge of the CMS needs for all kinds of transfer workflows. This contribution deals with a revision of FTS servers used by CMS, collecting statistics on thei...

Improving CMS data transfers among its distributed computing facilities

CERN Document Server

Flix, Jose

2010-01-01

CMS computing needs reliable, stable and fast connections among multi-tiered computing infrastructures. For data distribution, the CMS experiment relies on a data placement and transfer system, PhEDEx, managing replication operations at each site in the distribution network. PhEDEx uses the File Transfer Service (FTS), a low level data movement service responsible for moving sets of files from one site to another, while allowing participating sites to control the network resource usage. FTS servers are provided by Tier-0 and Tier-1 centres and are used by all computing sites in CMS, according to the established policy. FTS needs to be set up according to the Grid site's policies, and properly configured to satisfy the requirements of all Virtual Organizations making use of the Grid resources at the site. Managing the service efficiently requires good knowledge of the CMS needs for all kinds of transfer workflows. This contribution deals with a revision of FTS servers used by CMS, collecting statistics on the...

RECOLA2: REcursive Computation of One-Loop Amplitudes 2

Science.gov (United States)

Denner, Ansgar; Lang, Jean-Nicolas; Uccirati, Sandro

2018-03-01

We present the Fortran95 program RECOLA2 for the perturbative computation of next-to-leading-order transition amplitudes in the Standard Model of particle physics and extended Higgs sectors. New theories are implemented via model files in the 't Hooft-Feynman gauge in the conventional formulation of quantum field theory and in the Background-Field method. The present version includes model files for Two-Higgs-Doublet Model and the Higgs-Singlet Extension of the Standard Model. We support standard renormalization schemes for the Standard Model as well as many commonly used renormalization schemes in extended Higgs sectors. Within these models the computation of next-to-leading-order polarized amplitudes and squared amplitudes, optionally summed over spin and colour, is fully automated for any process. RECOLA2 allows the computation of colour- and spin-correlated leading-order squared amplitudes that are needed in the dipole subtraction formalism. RECOLA2 is publicly available for download at http://recola.hepforge.org.

Computerization of radiology departmental management using the personal computer: application in medium sized hospital

International Nuclear Information System (INIS)

Ahn, Woo Hyun

1992-01-01

The author developed a computer program for use in registration, monthly statistics, printing of reports, data storage and retrieval in the Radiology department. This program has been used in the Department of Radiology, MoonHwa Hospital since November 1990. This program was written in FoxBASE language, consisted of two independent subprograms, one installed in a registration computer without a printer and another in a reporting computer with a printer. The subprograms were designed to link their data by floppy disk. Each computer's hard disk contained permanent files for retrieval and temporary files for data input. All permanent files were indexed on several keywords including the patient's identification data. 1. Registration was performed easily and rapidly. 2. A monthly statistic was obtained simply. 3. Retrieval of the results of previous radiologic studies, printing of report, storage and indexing of data were achieved automatically. This program had merits of simple operation, large storage capacity, rapid retrieval speed, relative low price, easy adjustment for other hospitals. Therefore this program is considered to be an economic substitute for computerization of radiology departmental management in medium sized hospitals

76 FR 43679 - Filing via the Internet; Notice of Additional File Formats for efiling

Science.gov (United States)

2011-07-21

... list of acceptable file formats the four-character file extensions for Microsoft Office 2007/2010... files from Office 2007 or Office 2010 in an Office 2003 format prior to submission. Dated: July 15, 2011...

UPIN Group File

Data.gov (United States)

U.S. Department of Health & Human Services — The Group Unique Physician Identifier Number (UPIN) File is the business entity file that contains the group practice UPIN and descriptive information. It does NOT...

Interoperability format translation and transformation between IFC architectural design file and simulation file formats

Science.gov (United States)

Chao, Tian-Jy; Kim, Younghun

2015-01-06

Automatically translating a building architecture file format (Industry Foundation Class) to a simulation file, in one aspect, may extract data and metadata used by a target simulation tool from a building architecture file. Interoperability data objects may be created and the extracted data is stored in the interoperability data objects. A model translation procedure may be prepared to identify a mapping from a Model View Definition to a translation and transformation function. The extracted data may be transformed using the data stored in the interoperability data objects, an input Model View Definition template, and the translation and transformation function to convert the extracted data to correct geometric values needed for a target simulation file format used by the target simulation tool. The simulation file in the target simulation file format may be generated.

12 CFR 5.4 - Filing required.

Science.gov (United States)

2010-01-01

... CORPORATE ACTIVITIES Rules of General Applicability § 5.4 Filing required. (a) Filing. A depository institution shall file an application or notice with the OCC to engage in corporate activities and... advise an applicant through a pre-filing communication to send the filing or submission directly to the...

Evaluation of Root Canal Preparation Using Rotary System and Hand Instruments Assessed by Micro-Computed Tomography

Science.gov (United States)

Stavileci, Miranda; Hoxha, Veton; Görduysus, Ömer; Tatar, Ilkan; Laperre, Kjell; Hostens, Jeroen; Küçükkaya, Selen; Muhaxheri, Edmond

2015-01-01

Background Complete mechanical preparation of the root canal system is rarely achieved. Therefore, the purpose of this study was to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files using micro-computed tomography. Material/Methods Sixty extracted upper second premolars were selected and divided into 2 groups of 30 teeth each. Before preparation, all samples were scanned by micro-computed tomography. Thirty teeth were prepared with the ProTaper system and the other 30 with stainless steel files. After preparation, the untouched surface and root canal straightening were evaluated with micro-computed tomography. The percentage of untouched root canal surface was calculated in the coronal, middle, and apical parts of the canal. We also calculated straightening of the canal after root canal preparation. Results from the 2 groups were statistically compared using the Minitab statistical package. Results ProTaper rotary files left less untouched root canal surface compared with manual preparation in coronal, middle, and apical sector (protary techniques completely prepared the root canal, and both techniques caused slight straightening of the root canal. PMID:26092929

Huygens file service and storage architecture

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

1993-01-01

The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

Huygens File Service and Storage Architecture

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.; Stabell-Kulo, Tage; Stabell-Kulo, Tage

1993-01-01

The Huygens file server is a high-performance file server which is able to deliver multi-media data in a timely manner while also providing clients with ordinary “Unix” like file I/O. The file server integrates client machines, file servers and tertiary storage servers in the same storage

Analysis On Security Of Cloud Computing

Directory of Open Access Journals (Sweden)

Muhammad Zunnurain Hussain

2017-01-01

Full Text Available In this paper Author will be discussing the security issues and challenges faced by the industry in securing the cloud computing and how these problems can be tackled. Cloud computing is modern technique of sharing resources like data sharing file sharing basically sharing of resources without launching own infrastructure and using some third party resources to avoid huge investment . It is very challenging these days to secure the communication between two users although people use different encryption techniques 1.

Apically extruded dentin debris by reciprocating single-file and multi-file rotary system.

Science.gov (United States)

De-Deus, Gustavo; Neves, Aline; Silva, Emmanuel João; Mendonça, Thais Accorsi; Lourenço, Caroline; Calixto, Camila; Lima, Edson Jorge Moreira

2015-03-01

This study aims to evaluate the apical extrusion of debris by the two reciprocating single-file systems: WaveOne and Reciproc. Conventional multi-file rotary system was used as a reference for comparison. The hypotheses tested were (i) the reciprocating single-file systems extrude more than conventional multi-file rotary system and (ii) the reciprocating single-file systems extrude similar amounts of dentin debris. After solid selection criteria, 80 mesial roots of lower molars were included in the present study. The use of four different instrumentation techniques resulted in four groups (n = 20): G1 (hand-file technique), G2 (ProTaper), G3 (WaveOne), and G4 (Reciproc). The apparatus used to evaluate the collection of apically extruded debris was typical double-chamber collector. Statistical analysis was performed for multiple comparisons. No significant difference was found in the amount of the debris extruded between the two reciprocating systems. In contrast, conventional multi-file rotary system group extruded significantly more debris than both reciprocating groups. Hand instrumentation group extruded significantly more debris than all other groups. The present results yielded favorable input for both reciprocation single-file systems, inasmuch as they showed an improved control of apically extruded debris. Apical extrusion of debris has been studied extensively because of its clinical relevance, particularly since it may cause flare-ups, originated by the introduction of bacteria, pulpal tissue, and irrigating solutions into the periapical tissues.

elPrep: High-Performance Preparation of Sequence Alignment/Map Files for Variant Calling.

Directory of Open Access Journals (Sweden)

Charlotte Herzeel

Full Text Available elPrep is a high-performance tool for preparing sequence alignment/map files for variant calling in sequencing pipelines. It can be used as a replacement for SAMtools and Picard for preparation steps such as filtering, sorting, marking duplicates, reordering contigs, and so on, while producing identical results. What sets elPrep apart is its software architecture that allows executing preparation pipelines by making only a single pass through the data, no matter how many preparation steps are used in the pipeline. elPrep is designed as a multithreaded application that runs entirely in memory, avoids repeated file I/O, and merges the computation of several preparation steps to significantly speed up the execution time. For example, for a preparation pipeline of five steps on a whole-exome BAM file (NA12878, we reduce the execution time from about 1:40 hours, when using a combination of SAMtools and Picard, to about 15 minutes when using elPrep, while utilising the same server resources, here 48 threads and 23GB of RAM. For the same pipeline on whole-genome data (NA12878, elPrep reduces the runtime from 24 hours to less than 5 hours. As a typical clinical study may contain sequencing data for hundreds of patients, elPrep can remove several hundreds of hours of computing time, and thus substantially reduce analysis time and cost.

76 FR 52323 - Combined Notice of Filings; Filings Instituting Proceedings

Science.gov (United States)

2011-08-22

.... Applicants: Young Gas Storage Company, Ltd. Description: Young Gas Storage Company, Ltd. submits tariff..., but intervention is necessary to become a party to the proceeding. The filings are accessible in the.... More detailed information relating to filing requirements, interventions, protests, and service can be...

Hierarchical remote data possession checking method based on massive cloud files

Directory of Open Access Journals (Sweden)

Ma Haifeng

2017-06-01

Full Text Available Cloud storage service enables users to migrate their data and applications to the cloud, which saves the local data maintenance and brings great convenience to the users. But in cloud storage, the storage servers may not be fully trustworthy. How to verify the integrity of cloud data with lower overhead for users has become an increasingly concerned problem. Many remote data integrity protection methods have been proposed, but these methods authenticated cloud files one by one when verifying multiple files. Therefore, the computation and communication overhead are still high. Aiming at this problem, a hierarchical remote data possession checking (hierarchical-remote data possession checking (H-RDPC method is proposed, which can provide efficient and secure remote data integrity protection and can support dynamic data operations. This paper gives the algorithm descriptions, security, and false negative rate analysis of H-RDPC. The security analysis and experimental performance evaluation results show that the proposed H-RDPC is efficient and reliable in verifying massive cloud files, and it has 32–81% improvement in performance compared with RDPC.

Study and development of a document file system with selective access; Etude et realisation d'un systeme de fichiers documentaires a acces selectif

Energy Technology Data Exchange (ETDEWEB)

Mathieu, Jean-Claude

1974-06-21

The objective of this research thesis was to design and to develop a set of software aimed at an efficient management of a document file system by using methods of selective access to information. Thus, the three main aspects of file processing (creation, modification, reorganisation) have been addressed. The author first presents the main problems related to the development of a comprehensive automatic documentation system, and their conventional solutions. Some future aspects, notably dealing with the development of peripheral computer technology, are also evoked. He presents the characteristics of INIS bibliographic records provided by the IAEA which have been used to create the files. In the second part, he briefly describes the file system general organisation. This system is based on the use of two main files: an inverse file which contains for each descriptor a list of of numbers of files indexed by this descriptor, and a dictionary of descriptor or input file which gives access to the inverse file. The organisation of these both files is then describes in a detailed way. Other related or associated files are created, and the overall architecture and mechanisms integrated into the file data input software are described, as well as various processing applied to these different files. Performance and possible development are finally discussed.

Locking Editor A Utility For Protecting Software Exercises In The Computer Laboratory Of AMA University

Directory of Open Access Journals (Sweden)

Paul M. Grafilon

2017-07-01

Full Text Available The student of AMA University persistence in computing which has the keys to providing their talent needed to fill the computer laboratory in the computing professions. A range of factors can affect a students decision to remain in a computing major or change to another major if ever they feel that computing education is difficult. This has to describe the activities in computer laboratory specifically exercises machine problems and computing case studies interacting different application programs as the basis of their skills and knowledge in programming capability. The nature of those activities addresses by using of IDE as open source in all programming applications which may result of specific intervention such as using the editor to create a source file the code blocks comments and program statements are entered and the file saved. In case there are no corrective actions taken as the editor does not know this is supposed to be a source file as opposed to notes for class. If working in a position-dependent language like Java the developer would have to be very careful about indenting. The file has to be saved with the correct file extension and in a directory where the compiler can find it. Each source file has to be compiled separately if the program has a few source files they all have to be named separately in the compiler. When invoking the compiler it has to be directed to look in the correct directory for the source files and where the output files should be stored. If there is an error in the source file the compiler will output messages and fail to complete. For any errors the developer goes back and edits the source file working from line numbers and compiler messages to fix the problems and these steps continue until all the source files compile without errors. When linking each object file is specified as being part of the build. Again the locations for the object files and executable are given. There may be errors at this point

Efficacy of Twisted File Adaptive, Reciproc and ProTaper Universal Retreatment instruments for root-canal-filling removal: A cone-beam computed tomography study.

Science.gov (United States)

Akbulut, Makbule Bilge; Akman, Melek; Terlemez, Arslan; Magat, Guldane; Sener, Sevgi; Shetty, Heeresh

2016-01-01

The aim of this study was to evaluate the efficacy of Twisted File (TF) Adaptive, Reciproc, and ProTaper Universal Retreatment (UR) System instruments for removing root-canal-filling. Sixty single rooted teeth were decoronated, instrumented and obturated. Preoperative CBCT scans were taken and the teeth were retreated with TF Adaptive, Reciproc, ProTaper UR, or hand files (n=15). Then, the teeth were rescanned, and the percentage volume of the residual root-canal-filling material was established. The total time for retreatment was recorded, and the data was statistically analyzed. The statistical ranking of the residual filling material volume was as follows: hand file=TF Adaptive>ProTaper UR=Reciproc. The ProTaper UR and Reciproc systems required shorter periods of time for retreatment. Root canal filling was more efficiently removed by using Reciproc and ProTaper UR instruments than TF Adaptive instruments and hand files. The TF Adaptive system was advantageous over hand files with regard to operating time.

NJOY99, Data Processing System of Evaluated Nuclear Data Files ENDF Format

International Nuclear Information System (INIS)

2000-01-01

1 - Description of program or function: The NJOY nuclear data processing system is a modular computer code used for converting evaluated nuclear data in the ENDF format into libraries useful for applications calculations. Because the Evaluated Nuclear Data File (ENDF) format is used all around the world (e.g., ENDF/B-VI in the US, JEF-2.2 in Europe, JENDL-3.2 in Japan, BROND-2.2 in Russia), NJOY gives its users access to a wide variety of the most up-to-date nuclear data. NJOY provides comprehensive capabilities for processing evaluated data, and it can serve applications ranging from continuous-energy Monte Carlo (MCNP), through deterministic transport codes (DANT, ANISN, DORT), to reactor lattice codes (WIMS, EPRI). NJOY handles a wide variety of nuclear effects, including resonances, Doppler broadening, heating (KERMA), radiation damage, thermal scattering (even cold moderators), gas production, neutrons and charged particles, photo-atomic interactions, self shielding, probability tables, photon production, and high-energy interactions (to 150 MeV). Output can include printed listings, special library files for applications, and Postscript graphics (plus color). More information on NJOY is available from the developer's home page at http://t2.lanl.gov/tour/tourbus.html. Follow the Tourbus section of the Tour area to find notes from the ICTP lectures held at Trieste in March 2000 on the ENDF format and on the NJOY code. NJOY contains the following modules: NJOY directs the flow of data through the other modules and contains a library of common functions and subroutines used by the other modules. RECONR reconstructs pointwise (energy-dependent) cross sections from ENDF resonance parameters and interpolation schemes. BROADR Doppler broadens and thins pointwise cross sections. UNRESR computes effective self-shielded pointwise cross sections in the unresolved energy range. HEATR generates pointwise heat production cross sections (KERMA coefficients) and radiation

Evaluated neutronic file for indium

International Nuclear Information System (INIS)

Smith, A.B.; Chiba, S.; Smith, D.L.; Meadows, J.W.; Guenther, P.T.; Lawson, R.D.; Howerton, R.J.

1990-01-01

A comprehensive evaluated neutronic data file for elemental indium is documented. This file, extending from 10 -5 eV to 20 MeV, is presented in the ENDF/B-VI format, and contains all neutron-induced processes necessary for the vast majority of neutronic applications. In addition, an evaluation of the 115 In(n,n') 116m In dosimetry reaction is presented as a separate file. Attention is given in quantitative values, with corresponding uncertainty information. These files have been submitted for consideration as a part of the ENDF/B-VI national evaluated-file system. 144 refs., 10 figs., 4 tabs

Distributed Computing for the Pierre Auger Observatory

International Nuclear Information System (INIS)

Chudoba, J.

2015-01-01

Pierre Auger Observatory operates the largest system of detectors for ultra-high energy cosmic ray measurements. Comparison of theoretical models of interactions with recorded data requires thousands of computing cores for Monte Carlo simulations. Since 2007 distributed resources connected via EGI grid are successfully used. The first and the second versions of production system based on bash scripts and MySQL database were able to submit jobs to all reliable sites supporting Virtual Organization auger. For many years VO auger belongs to top ten of EGI users based on the total used computing time. Migration of the production system to DIRAC interware started in 2014. Pilot jobs improve efficiency of computing jobs and eliminate problems with small and less reliable sites used for the bulk production. The new system has also possibility to use available resources in clouds. Dirac File Catalog replaced LFC for new files, which are organized in datasets defined via metadata. CVMFS is used for software distribution since 2014. In the presentation we give a comparison of the old and the new production system and report the experience on migrating to the new system. (paper)

Distributed Computing for the Pierre Auger Observatory

Science.gov (United States)

Chudoba, J.

2015-12-01

Pierre Auger Observatory operates the largest system of detectors for ultra-high energy cosmic ray measurements. Comparison of theoretical models of interactions with recorded data requires thousands of computing cores for Monte Carlo simulations. Since 2007 distributed resources connected via EGI grid are successfully used. The first and the second versions of production system based on bash scripts and MySQL database were able to submit jobs to all reliable sites supporting Virtual Organization auger. For many years VO auger belongs to top ten of EGI users based on the total used computing time. Migration of the production system to DIRAC interware started in 2014. Pilot jobs improve efficiency of computing jobs and eliminate problems with small and less reliable sites used for the bulk production. The new system has also possibility to use available resources in clouds. Dirac File Catalog replaced LFC for new files, which are organized in datasets defined via metadata. CVMFS is used for software distribution since 2014. In the presentation we give a comparison of the old and the new production system and report the experience on migrating to the new system.

FHEO Filed Cases

Data.gov (United States)

Department of Housing and Urban Development — The dataset is a list of all the Title VIII fair housing cases filed by FHEO from 1/1/2007 - 12/31/2012 including the case number, case name, filing date, state and...

How Hedstrom files fail during clinical use? A retrieval study based on SEM, optical microscopy and micro-XCT analysis.

Science.gov (United States)

Zinelis, Spiros; Al Jabbari, Youssef S

2018-05-01

This study was conducted to evaluate the failure mechanism of clinically failed Hedstrom (H)-files. Discarded H-files (n=160) from #8 to #40 ISO sizes were collected from different dental clinics. Retrieved files were classified according to their macroscopic appearance and they were investigated under scanning electron microscopy (SEM) and X-ray micro-computed tomography (mXCT). Then the files were embedded in resin along their longitudinal axis and after metallographic grinding and polishing, studied under an incident light microscope. The macroscopic evaluation showed that small ISO sizes (#08-#15) failed by extensive plastic deformation, while larger sizes (≥#20) tended to fracture. Light microscopy and mXCT results coincided showing that unused and plastically deformed files were free of internal defects, while fractured files demonstrate the presence of intense cracking in the flute region. SEM analysis revealed the presence of striations attributed to the fatigue mechanism. Secondary cracks were also identified by optical microscopy and their distribution was correlated to fatigue under bending loading. Experimental results demonstrated that while overloading of cutting instruments is the predominating failure mechanism of small file sizes (#08-#15), fatigue should be considered the fracture mechanism for larger sizes (≥#20).

ITP Adjuster 1.0: A New Utility Program to Adjust Charges in the Topology Files Generated by the PRODRG Server

Directory of Open Access Journals (Sweden)

Diogo de Jesus Medeiros

2013-01-01

Full Text Available The suitable computation of accurate atomic charges for the GROMACS topology *.itp files of small molecules, generated in the PRODRG server, has been a tricky task nowadays because it does not calculate atomic charges using an ab initio method. Usually additional steps of structure optimization and charges calculation, followed by a tedious manual replacement of atomic charges in the *.itp file, are needed. In order to assist this task, we report here the ITP Adjuster 1.0, a utility program developed to perform the replacement of the PRODRG charges in the *.itp files of small molecules by ab initio charges.

Common Sense Planning for a Computer, or, What's It Worth to You?

Science.gov (United States)

Crawford, Walt

1984-01-01

Suggests factors to be considered in planning for the purchase of a microcomputer, including budgets, benefits, costs, and decisions. Major uses of a personal computer are described--word processing, financial analysis, file and database management, programming and computer literacy, education, entertainment, and thrill of high technology. (EJS)

COMPUTING SERVICES DURING THE ANNUAL CERN SHUTDOWN

CERN Multimedia

2001-01-01

As in previous years, computing services run by IT division will be left running unattended during the annual shutdown. The following points should be noted. No interruptions are scheduled for local and wide area networking and the ACB, e-mail and unix interactive services. Unix batch services will be available but without access to manually mounted tapes. Dedicated Engineering services, general purpose database services and the Helpdesk will be closed during this period. An operator service will be maintained and can be reached at extension 75011 or by Email to computer.operations@cern.ch. Users should be aware that, except where there are special arrangements, any major problems that develop during this period will most likely be resolved only after CERN has reopened. In particular, we cannot guarantee backups for Home Directory files (for Unix or Windows) or for email folders. Any changes that you make to your files during this period may be lost in the event of a disk failure. Please note that all t...

Fast processing the film data file

International Nuclear Information System (INIS)

Abramov, B.M.; Avdeev, N.F.; Artemov, A.V.

1978-01-01

The problems of processing images obtained from three-meter magnetic spectrometer on a new PSP-2 automatic device are considered. A detailed description of the filtration program, which controls the correctness of operation connection line, as well as of scanning parameters and technical quality of information. The filtration process can be subdivided into the following main stages: search of fiducial marks binding of track to fiducial marks; plotting from sparks of track fragments in chambers. For filtration purposes the BESM-6 computer has been chosen. The complex of filtration programs is shaped as a RAM-file, the required version of the program is collected by the PATCHY program. The subprograms, performing the greater part of the calculations are written in the autocode MADLEN, the rest of the subprograms - in FORTRAN and ALGOL. The filtration time for one image makes 1,2-2 s of the calculation. The BESM-6 computer processes up to 12 thousand images a day

[Which zoonoses should the general population be more awareness of ? Qualitative research targeted at veterinarians].

Science.gov (United States)

Horiguchi, Itsuko; Ishikawa, Naoko; Feng, Qiaolian; Kigawa, Mika; Marui, Eiji

2011-09-01

The purpose of this study was to determine which zoonoses should the general population be more aware of. We conducted qualitative research (Delphi method) on thirty veterinarians who were selected from the whole country. Twenty-four diseases were selected. The reasons for their selection were classified into three categories: "Amount of knowledge, attitude and behavior", "Clinicoepidemiologic characteristics" and "Social characteristics". More than half of the top ten zoonoses are those that are not transmitted from humans to humans, with rabies in the first place, avian influenza (with its high pathogenicity) in the second place and psittacosis in the third place. From the top ten diseases, it is considered that the prevention of animal-to-human transmission should be emphasized. In addition, from the reasons for the selection, it is suggested that it is necessary to review social characteristics, such as the inadequacy of quarantine and the insufficiencies of legal systems. As for the zoonoses that are transmitted from humans to humans, it will be indispensable in the future to widely spread information on zoonoses and enlighten the general population about them. It is thought that this survey can be a basis for selecting a zoonosis that should be given priority in enlightening the general population.

How do German veterinarians use social networks? A study, using the example of the 'NOVICE' veterinary medicine network.

Science.gov (United States)

Schaper, Elisabeth; Forrest, Neil D; Tipold, Andrea; Ehlers, Jan P

2013-01-01

NOVICE (Network Of Veterinary ICT in Education, http://www.noviceproject.eu/), is a professional online social network for veterinarians, lecturers and students of veterinary medicine as well as for e-Learning advisers and others working in establishments that teach veterinary medicine. This study sets out to investigate to what extent German veterinarians, lecturers, students of veterinary medicine and e-Learning representatives would accept a specialist network, what requirements would have to be met by an online social network, how to use web 2.0 tools [21], [30] and what advantages a specialist network could offer. The investigation was carried out by analysing data from the Elgg platform database as well as using Google Analytics. Annual focus group surveys and individual interviews were carried out in order to perform an analysis of acceptance among network users. 1961 users from 73 different countries registered on the NOVICE site between 1 September 2010 and 21 March 2012. Germany represents the biggest user group, with 565 users (28.81%). During this period, most individual hits on the website came from Germany too. In total, 24.83% of all members are active, while 19.22% of German members participate actively. In terms of gender, there are significantly more female members than male members, both in the NOVICE network as a whole as well as in Germany. The most used web 2.0 tools are chat and email messaging services as well as writing wikis and contributing to forum discussions. The focus group surveys showed that respondents generally make use of other online communities too. Active members generally use more web 2.0 tools than in other networks, while passive members are generally more reluctant in all networks. All participants of the survey welcomed the idea of having a network specifically set up for the profession and believe that it could be very useful for veterinary medicine. The network and its membership figures developed very positively during

76 FR 62092 - Filing Procedures

Science.gov (United States)

2011-10-06

... INTERNATIONAL TRADE COMMISSION Filing Procedures AGENCY: International Trade Commission. ACTION: Notice of issuance of Handbook on Filing Procedures. SUMMARY: The United States International Trade Commission (``Commission'') is issuing a Handbook on Filing Procedures to replace its Handbook on Electronic...

12 CFR 1780.9 - Filing of papers.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Filing of papers. 1780.9 Section 1780.9 Banks... papers. (a) Filing. Any papers required to be filed shall be addressed to the presiding officer and filed... Director or the presiding officer. All papers filed by electronic media shall also concurrently be filed in...

Computer Software for Life Cycle Cost.

Science.gov (United States)

1987-04-01

34 111. 1111I .25 IL4 jj 16 MICROCOPY RESOLUTION TEST CHART hut FILE C AIR CoMMNAMN STFF COLLG STUJDET PORTO i COMpUTER SOFTWARE FOR LIFE CYCLE CO879...obsolete), physical life (utility before physically wearing out), or application life (utility in a given function)." (7:5) The costs are usually

Desk-top computer assisted processing of thermoluminescent dosimeters

International Nuclear Information System (INIS)

Archer, B.R.; Glaze, S.A.; North, L.B.; Bushong, S.C.

1977-01-01

An accurate dosimetric system utilizing a desk-top computer and high sensitivity ribbon type TLDs has been developed. The system incorporates an exposure history file and procedures designed for constant spatial orientation of each dosimeter. Processing of information is performed by two computer programs. The first calculates relative response factors to insure that the corrected response of each TLD is identical following a given dose of radiation. The second program computes a calibration factor and uses it and the relative response factor to determine the actual dose registered by each TLD. (U.K.)

The Jade File System. Ph.D. Thesis

Science.gov (United States)

Rao, Herman Chung-Hwa

1991-01-01

File systems have long been the most important and most widely used form of shared permanent storage. File systems in traditional time-sharing systems, such as Unix, support a coherent sharing model for multiple users. Distributed file systems implement this sharing model in local area networks. However, most distributed file systems fail to scale from local area networks to an internet. Four characteristics of scalability were recognized: size, wide area, autonomy, and heterogeneity. Owing to size and wide area, techniques such as broadcasting, central control, and central resources, which are widely adopted by local area network file systems, are not adequate for an internet file system. An internet file system must also support the notion of autonomy because an internet is made up by a collection of independent organizations. Finally, heterogeneity is the nature of an internet file system, not only because of its size, but also because of the autonomy of the organizations in an internet. The Jade File System, which provides a uniform way to name and access files in the internet environment, is presented. Jade is a logical system that integrates a heterogeneous collection of existing file systems, where heterogeneous means that the underlying file systems support different file access protocols. Because of autonomy, Jade is designed under the restriction that the underlying file systems may not be modified. In order to avoid the complexity of maintaining an internet-wide, global name space, Jade permits each user to define a private name space. In Jade's design, we pay careful attention to avoiding unnecessary network messages between clients and file servers in order to achieve acceptable performance. Jade's name space supports two novel features: (1) it allows multiple file systems to be mounted under one direction; and (2) it permits one logical name space to mount other logical name spaces. A prototype of Jade was implemented to examine and validate its

The Galley Parallel File System

Science.gov (United States)

Nieuwejaar, Nils; Kotz, David

1996-01-01

Most current multiprocessor file systems are designed to use multiple disks in parallel, using the high aggregate bandwidth to meet the growing I/0 requirements of parallel scientific applications. Many multiprocessor file systems provide applications with a conventional Unix-like interface, allowing the application to access multiple disks transparently. This interface conceals the parallelism within the file system, increasing the ease of programmability, but making it difficult or impossible for sophisticated programmers and libraries to use knowledge about their I/O needs to exploit that parallelism. In addition to providing an insufficient interface, most current multiprocessor file systems are optimized for a different workload than they are being asked to support. We introduce Galley, a new parallel file system that is intended to efficiently support realistic scientific multiprocessor workloads. We discuss Galley's file structure and application interface, as well as the performance advantages offered by that interface.

Gas-liquid flow filed in agitated vessels

International Nuclear Information System (INIS)

Hormazi, F.; Alaie, M.; Dabir, B.; Ashjaie, M.

2001-01-01

Agitated vessels in form of sti reed tank reactors and mixed ferment ors are being used in large numbers of industry. It is more important to develop good, and theoretically sound models for scaling up and design of agitated vessels. In this article, two phase flow (gas-liquid) in a agitated vessel has been investigated numerically. A two-dimensional computational fluid dynamics model, is used to predict the gas-liquid flow. The effects of gas phase, varying gas flow rates and variation of bubbles shape on flow filed of liquid phase are investigated. The numerical results are verified against the experimental data

TH-AB-201-12: Using Machine Log-Files for Treatment Planning and Delivery QA

Energy Technology Data Exchange (ETDEWEB)

Stanhope, C [Beaumont Health System, Royal Oak MI and Wayne State University, Detroit, MI (United States); Liang, J; Drake, D; Yan, D [Beaumont Health System, Royal Oak, MI (United States)

2016-06-15

Purpose: To determine the segment reduction and dose resolution necessary for machine log-files to effectively replace current phantom-based patient-specific quality assurance, while minimizing computational cost. Methods: Elekta’s Log File Convertor R3.2 records linac delivery parameters (dose rate, gantry angle, leaf position) every 40ms. Five VMAT plans [4 H&N, 1 Pulsed Brain] comprised of 2 arcs each were delivered on the ArcCHECK phantom. Log-files were reconstructed in Pinnacle on the phantom geometry using 1/2/3/4° control point spacing and 2/3/4mm dose grid resolution. Reconstruction effectiveness was quantified by comparing 2%/2mm gamma passing rates of the original and log-file plans. Modulation complexity scores (MCS) were calculated for each beam to correlate reconstruction accuracy and beam modulation. Percent error in absolute dose for each plan-pair combination (log-file vs. ArcCHECK, original vs. ArcCHECK, log-file vs. original) was calculated for each arc and every diode greater than 10% of the maximum measured dose (per beam). Comparing standard deviations of the three plan-pair distributions, relative noise of the ArcCHECK and log-file systems was elucidated. Results: The original plans exhibit a mean passing rate of 95.1±1.3%. The eight more modulated H&N arcs [MCS=0.088±0.014] and two less modulated brain arcs [MCS=0.291±0.004] yielded log-file pass rates most similar to the original plan when using 1°/2mm [0.05%±1.3% lower] and 2°/3mm [0.35±0.64% higher] log-file reconstructions respectively. Log-file and original plans displayed percent diode dose errors 4.29±6.27% and 3.61±6.57% higher than measurement. Excluding the phantom eliminates diode miscalibration and setup errors; log-file dose errors were 0.72±3.06% higher than the original plans – significantly less noisy. Conclusion: For log-file reconstructed VMAT arcs, 1° control point spacing and 2mm dose resolution is recommended, however, less modulated arcs may allow less

Evaluation of Root Canal Preparation Using Rotary System and Hand Instruments Assessed by Micro-Computed Tomography.

Science.gov (United States)

Stavileci, Miranda; Hoxha, Veton; Görduysus, Ömer; Tatar, Ilkan; Laperre, Kjell; Hostens, Jeroen; Küçükkaya, Selen; Muhaxheri, Edmond

2015-06-20

Complete mechanical preparation of the root canal system is rarely achieved. Therefore, the purpose of this study was to evaluate and compare the root canal shaping efficacy of ProTaper rotary files and standard stainless steel K-files using micro-computed tomography. Sixty extracted upper second premolars were selected and divided into 2 groups of 30 teeth each. Before preparation, all samples were scanned by micro-computed tomography. Thirty teeth were prepared with the ProTaper system and the other 30 with stainless steel files. After preparation, the untouched surface and root canal straightening were evaluated with micro-computed tomography. The percentage of untouched root canal surface was calculated in the coronal, middle, and apical parts of the canal. We also calculated straightening of the canal after root canal preparation. Results from the 2 groups were statistically compared using the Minitab statistical package. ProTaper rotary files left less untouched root canal surface compared with manual preparation in coronal, middle, and apical sector (p<0.001). Similarly, there was a statistically significant difference in root canal straightening after preparation between the techniques (p<0.001). Neither manual nor rotary techniques completely prepared the root canal, and both techniques caused slight straightening of the root canal.

75 FR 32519 - Miracor Diagnostics, Inc., Monaco Finance, Inc., MPEL Holdings Corp. (f/k/a Computer Transceiver...

Science.gov (United States)

2010-06-08

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] Miracor Diagnostics, Inc., Monaco Finance, Inc., MPEL Holdings Corp. (f/k/a Computer Transceiver Systems, Inc.), MR3 Systems, Inc., Mutual Risk... concerning the securities of Monaco Finance, Inc. because it has not filed any periodic reports since the...

Accomplish the Application Area in Cloud Computing

OpenAIRE

Bansal, Nidhi; Awasthi, Amit

2012-01-01

In the cloud computing application area of accomplish, we find the fact that cloud computing covers a lot of areas are its main asset. At a top level, it is an approach to IT where many users, some even from different companies get access to shared IT resources such as servers, routers and various file extensions, instead of each having their own dedicated servers. This offers many advantages like lower costs and higher efficiency. Unfortunately there have been some high profile incidents whe...

Informational-computer system for the neutron spectra analysis

International Nuclear Information System (INIS)

Berzonis, M.A.; Bondars, H.Ya.; Lapenas, A.A.

1979-01-01

In this article basic principles of the build-up of the informational-computer system for the neutron spectra analysis on a basis of measured reaction rates are given. The basic data files of the system, needed software and hardware for the system operation are described

Computer-aided engineering system for design of sequence arrays and lithographic masks

Science.gov (United States)

Hubbell, Earl A.; Morris, MacDonald S.; Winkler, James L.

1996-01-01

An improved set of computer tools for forming arrays. According to one aspect of the invention, a computer system (100) is used to select probes and design the layout of an array of DNA or other polymers with certain beneficial characteristics. According to another aspect of the invention, a computer system uses chip design files (104) to design and/or generate lithographic masks (110).

ExcelAutomat: a tool for systematic processing of files as applied to quantum chemical calculations

Science.gov (United States)

Laloo, Jalal Z. A.; Laloo, Nassirah; Rhyman, Lydia; Ramasami, Ponnadurai

2017-07-01

The processing of the input and output files of quantum chemical calculations often necessitates a spreadsheet as a key component of the workflow. Spreadsheet packages with a built-in programming language editor can automate the steps involved and thus provide a direct link between processing files and the spreadsheet. This helps to reduce user-interventions as well as the need to switch between different programs to carry out each step. The ExcelAutomat tool is the implementation of this method in Microsoft Excel (MS Excel) using the default Visual Basic for Application (VBA) programming language. The code in ExcelAutomat was adapted to work with the platform-independent open-source LibreOffice Calc, which also supports VBA. ExcelAutomat provides an interface through the spreadsheet to automate repetitive tasks such as merging input files, splitting, parsing and compiling data from output files, and generation of unique filenames. Selected extracted parameters can be retrieved as variables which can be included in custom codes for a tailored approach. ExcelAutomat works with Gaussian files and is adapted for use with other computational packages including the non-commercial GAMESS. ExcelAutomat is available as a downloadable MS Excel workbook or as a LibreOffice workbook.

78 FR 21930 - Aquenergy Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application...

Science.gov (United States)

2013-04-12

... Systems, Inc.; Notice of Intent To File License Application, Filing of Pre-Application Document, and Approving Use of the Traditional Licensing Process a. Type of Filing: Notice of Intent to File License...: November 11, 2012. d. Submitted by: Aquenergy Systems, Inc., a fully owned subsidiaries of Enel Green Power...

12 CFR 16.33 - Filing fees.

Science.gov (United States)

2010-01-01

... Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY SECURITIES OFFERING DISCLOSURE RULES § 16.33 Filing fees. (a) Filing fees must accompany certain filings made under the provisions of this part... Comptroller of the Currency Fees published pursuant to § 8.8 of this chapter. (b) Filing fees must be paid by...

75 FR 4689 - Electronic Tariff Filings

Science.gov (United States)

2010-01-29

... elements ``are required to properly identify the nature of the tariff filing, organize the tariff database... (or other pleading) and the Type of Filing code chosen will be resolved in favor of the Type of Filing...'s wish expressed in its transmittal letter or in other pleadings, the Commission may not review a...

The SIMRAND 1 computer program: Simulation of research and development projects

Science.gov (United States)

Miles, R. F., Jr.

1986-01-01

The SIMRAND I Computer Program (Version 5.0 x 0.3) written in Microsoft FORTRAN for the IBM PC microcomputer and its compatibles is described. The SIMRAND I Computer Program comprises eleven modules-a main routine and ten subroutines. Two additional files are used at compile time; one inserts the system or task equations into the source code, while the other inserts the dimension statements and common blocks. The SIMRAND I Computer Program can be run on most microcomputers or mainframe computers with only minor modifications to the computer code.

FragIt: a tool to prepare input files for fragment based quantum chemical calculations.

Directory of Open Access Journals (Sweden)

Casper Steinmann

Full Text Available Near linear scaling fragment based quantum chemical calculations are becoming increasingly popular for treating large systems with high accuracy and is an active field of research. However, it remains difficult to set up these calculations without expert knowledge. To facilitate the use of such methods, software tools need to be available to support these methods and help to set up reasonable input files which will lower the barrier of entry for usage by non-experts. Previous tools relies on specific annotations in structure files for automatic and successful fragmentation such as residues in PDB files. We present a general fragmentation methodology and accompanying tools called FragIt to help setup these calculations. FragIt uses the SMARTS language to locate chemically appropriate fragments in large structures and is applicable to fragmentation of any molecular system given suitable SMARTS patterns. We present SMARTS patterns of fragmentation for proteins, DNA and polysaccharides, specifically for D-galactopyranose for use in cyclodextrins. FragIt is used to prepare input files for the Fragment Molecular Orbital method in the GAMESS program package, but can be extended to other computational methods easily.

Integral transport computation of gamma detector response with the CPM2 code

International Nuclear Information System (INIS)

Jones, D.B.

1989-12-01

CPM-2 Version 3 is an enhanced version of the CPM-2 lattice physics computer code which supports the capabilities to (1) perform a two-dimensional gamma flux calculation and (2) perform Restart/Data file maintenance operations. The Gamma Calculation Module implemented in CPM-2 was first developed for EPRI in the CASMO-1 computer code by Studsvik Energiteknik under EPRI Agreement RP2352-01. The gamma transport calculation uses the CPM-HET code module to calculate the transport of gamma rays in two dimensions in a mixed cylindrical-rectangular geometry, where the basic fuel assembly and component regions are maintained in a rectangular geometry, but the fuel pins are represented as cylinders within a square pin cell mesh. Such a capability is needed to represent gamma transport in an essentially transparent medium containing spatially distributed ''black'' cylindrical pins. Under a subcontract to RP2352-01, RPI developed the gamma production and gamma interaction library used for gamma calculation. The CPM-2 gamma calculation was verified against reference results generated by Studsvik using the CASMO-1 program. The CPM-2 Restart/Data file maintenance capabilities provide the user with options to copy files between Restart/Data tapes and to purge files from the Restart/Data tapes

78 FR 75554 - Combined Notice of Filings

Science.gov (United States)

2013-12-12

...-000. Applicants: Young Gas Storage Company, Ltd. Description: Young Fuel Reimbursement Filing to be.... Protests may be considered, but intervention is necessary to become a party to the proceeding. eFiling is... qualifying facilities filings can be found at: http://www.ferc.gov/docs-filing/efiling/filing-req.pdf . For...

5 CFR 1203.13 - Filing pleadings.

Science.gov (United States)

2010-01-01

... delivery, by facsimile, or by e-filing in accordance with § 1201.14 of this chapter. If the document was... submitted by e-filing, it is considered to have been filed on the date of electronic submission. (e... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Filing pleadings. 1203.13 Section 1203.13...

PFS: a distributed and customizable file system

NARCIS (Netherlands)

Bosch, H.G.P.; Mullender, Sape J.

1996-01-01

In this paper we present our ongoing work on the Pegasus File System (PFS), a distributed and customizable file system that can be used for off-line file system experiments and on-line file system storage. PFS is best described as an object-oriented component library from which either a true file

76 FR 61351 - Combined Notice of Filings #1

Science.gov (United States)

2011-10-04

... MBR Baseline Tariff Filing to be effective 9/22/2011. Filed Date: 09/22/2011. Accession Number... submits tariff filing per 35.1: ECNY MBR Re-File to be effective 9/22/2011. Filed Date: 09/22/2011... Industrial Energy Buyers, LLC submits tariff filing per 35.1: NYIEB MBR Re-File to be effective 9/22/2011...

Deceit: A flexible distributed file system

Science.gov (United States)

Siegel, Alex; Birman, Kenneth; Marzullo, Keith

1989-01-01

Deceit, a distributed file system (DFS) being developed at Cornell, focuses on flexible file semantics in relation to efficiency, scalability, and reliability. Deceit servers are interchangeable and collectively provide the illusion of a single, large server machine to any clients of the Deceit service. Non-volatile replicas of each file are stored on a subset of the file servers. The user is able to set parameters on a file to achieve different levels of availability, performance, and one-copy serializability. Deceit also supports a file version control mechanism. In contrast with many recent DFS efforts, Deceit can behave like a plain Sun Network File System (NFS) server and can be used by any NFS client without modifying any client software. The current Deceit prototype uses the ISIS Distributed Programming Environment for all communication and process group management, an approach that reduces system complexity and increases system robustness.

Silvabase: A flexible data file management system

Science.gov (United States)

Lambing, Steven J.; Reynolds, Sandra J.

1991-01-01

The need for a more flexible and efficient data file management system for mission planning in the Mission Operations Laboratory (EO) at MSFC has spawned the development of Silvabase. Silvabase is a new data file structure based on a B+ tree data structure. This data organization allows for efficient forward and backward sequential reads, random searches, and appends to existing data. It also provides random insertions and deletions with reasonable efficiency, utilization of storage space well but not at the expense of speed, and performance of these functions on a large volume of data. Mission planners required that some data be keyed and manipulated in ways not found in a commercial product. Mission planning software is currently being converted to use Silvabase in the Spacelab and Space Station Mission Planning Systems. Silvabase runs on a Digital Equipment Corporation's popular VAX/VMS computers in VAX Fortran. Silvabase has unique features involving time histories and intervals such as in operations research. Because of its flexibility and unique capabilities, Silvabase could be used in almost any government or commercial application that requires efficient reads, searches, and appends in medium to large amounts of almost any kind of data.

10 CFR 110.89 - Filing and service.

Science.gov (United States)

2010-01-01

...: Rulemakings and Adjudications Staff or via the E-Filing system, following the procedure set forth in 10 CFR 2.302. Filing by mail is complete upon deposit in the mail. Filing via the E-Filing system is completed... residence with some occupant of suitable age and discretion; (2) Following the requirements for E-Filing in...

49 CFR 1104.6 - Timely filing required.

Science.gov (United States)

2010-10-01

... offers next day delivery to Washington, DC. If the e-filing option is chosen (for those pleadings and documents that are appropriate for e-filing, as determined by reference to the information on the Board's Web site), then the e-filed pleading or document is timely filed if the e-filing process is completed...

DICOM supported sofware configuration by XML files

International Nuclear Information System (INIS)

LucenaG, Bioing Fabian M; Valdez D, Andres E; Gomez, Maria E; Nasisi, Oscar H

2007-01-01

A method for the configuration of informatics systems that provide support to DICOM standards using XML files is proposed. The difference with other proposals is base on that this system does not code the information of a DICOM objects file, but codes the standard itself in an XML file. The development itself is the format for the XML files mentioned, in order that they can support what DICOM normalizes for multiple languages. In this way, the same configuration file (or files) can be use in different systems. Jointly the XML configuration file generated, we wrote also a set of CSS and XSL files. So the same file can be visualized in a standard browser, as a query system of DICOM standard, emerging use, that did not was a main objective but brings a great utility and versatility. We exposed also some uses examples of the configuration file mainly in relation with the load of DICOM information objects. Finally, at the conclusions we show the utility that the system has already provided when the edition of DICOM standard changes from 2006 to 2007