Lack of effect of ivermectin on prepatent guinea-worm

DEFF Research Database (Denmark)

Issaka-Tinorgah, A.; Magnussen, P.; Bloch, P.

1994-01-01

The effect of ivermectin on prepatent guinea-worm was tested in a single-blind placebo-controlled trial; 400 adults were randomly allocated to a single dose of ivermectin (150 µg/kg) or placebo. Fifty-four of the 385 participants who were followed for 15 months developed a total of 69 emergent...... guinea-worms. There was no significant differencein the proportion of persons with emergent guinea-worms between the 2 treatment groups; 58% appeared in males. 80% of emergent guinea-worms were located below the knee. Migration of guinea-worms in the tissues was not affected. It is concluded...

Ole Worm-Liv og videnskabTidstavle

DEFF Research Database (Denmark)

2006-01-01

hæftet indeholder syv artikler om Ole Worms liv, videnskab, museum, slægtsportrætter, antikvariske arbejder og om installationen Room One......hæftet indeholder syv artikler om Ole Worms liv, videnskab, museum, slægtsportrætter, antikvariske arbejder og om installationen Room One...

Community assembly of the worm gut microbiome

Science.gov (United States)

Gore, Jeff

It has become increasingly clear that human health is strongly influenced by the bacteria that live within the gut, known collectively as the gut microbiome. This complex community varies tremendously between individuals, but understanding the sources that lead to this heterogeneity is challenging. To address this challenge, we are using a bottom-up approach to develop a predictive understanding of how the microbiome assembles and functions within a simple and experimentally tractable gut, the gut of the worm C. elegans. We have found that stochastic community assembly in the C. elegansintestine is sufficient to produce strong inter-worm heterogeneity in community composition. When worms are fed with two neutrally-competing fluorescently labeled bacterial strains, we observe stochastically-driven bimodality in community composition, where approximately half of the worms are dominated by each bacterial strain. A simple model incorporating stochastic colonization suggests that heterogeneity between worms is driven by the low rate at which bacteria successfully establish new intestinal colonies. We can increase this rate experimentally by feeding worms at high bacterial density; in these conditions the bimodality disappears. We have also characterized all pairwise interspecies competitions among a set of eleven bacterial species, illuminating the rules governing interspecies community assembly. These results demonstrate the potential importance of stochastic processes in bacterial community formation and suggest a role for C. elegans as a model system for ecology of host-associated communities.

Filarial worms reduce Plasmodium infectivity in mosquitoes.

Directory of Open Access Journals (Sweden)

Matthew T Aliota

2011-02-01

Full Text Available Co-occurrence of malaria and filarial worm parasites has been reported, but little is known about the interaction between filarial worm and malaria parasites with the same Anopheles vector. Herein, we present data evaluating the interaction between Wuchereria bancrofti and Anopheles punctulatus in Papua New Guinea (PNG. Our field studies in PNG demonstrated that An. punctulatus utilizes the melanization immune response as a natural mechanism of filarial worm resistance against invading W. bancrofti microfilariae. We then conducted laboratory studies utilizing the mosquitoes Armigeres subalbatus and Aedes aegypti and the parasites Brugia malayi, Brugia pahangi, Dirofilaria immitis, and Plasmodium gallinaceum to evaluate the hypothesis that immune activation and/or development by filarial worms negatively impact Plasmodium development in co-infected mosquitoes. Ar. subalbatus used in this study are natural vectors of P. gallinaceum and B. pahangi and they are naturally refractory to B. malayi (melanization-based refractoriness.Mosquitoes were dissected and Plasmodium development was analyzed six days after blood feeding on either P. gallinaceum alone or after taking a bloodmeal containing both P. gallinaceum and B. malayi or a bloodmeal containing both P. gallinaceum and B. pahangi. There was a significant reduction in the prevalence and mean intensity of Plasmodium infections in two species of mosquito that had dual infections as compared to those mosquitoes that were infected with Plasmodium alone, and was independent of whether the mosquito had a melanization immune response to the filarial worm or not. However, there was no reduction in Plasmodium development when filarial worms were present in the bloodmeal (D. immitis but midgut penetration was absent, suggesting that factors associated with penetration of the midgut by filarial worms likely are responsible for the observed reduction in malaria parasite infections.These results could have an

Design parameters for sludge reduction in an aquatic worm reactor

NARCIS (Netherlands)

Hendrickx, T.L.G.; Temmink, B.G.; Elissen, H.J.H.; Buisman, C.J.N.

2010-01-01

Reduction and compaction of biological waste sludge from waste water treatment plants (WWTPs) can be achieved with the aquatic worm Lumbriculus variegatus. In our reactor concept for a worm reactor, the worms are immobilised in a carrier material. The size of a worm reactor will therefore mainly be

Detecting Internet Worms Using Data Mining Techniques

Directory of Open Access Journals (Sweden)

Muazzam Siddiqui

2008-12-01

Full Text Available Internet worms pose a serious threat to computer security. Traditional approaches using signatures to detect worms pose little danger to the zero day attacks. The focus of malware research is shifting from using signature patterns to identifying the malicious behavior displayed by the malwares. This paper presents a novel idea of extracting variable length instruction sequences that can identify worms from clean programs using data mining techniques. The analysis is facilitated by the program control flow information contained in the instruction sequences. Based upon general statistics gathered from these instruction sequences we formulated the problem as a binary classification problem and built tree based classifiers including decision tree, bagging and random forest. Our approach showed 95.6% detection rate on novel worms whose data was not used in the model building process.

Correlation between discharged worms and fecal egg counts in human clonorchiasis.

Directory of Open Access Journals (Sweden)

Jae-Hwan Kim

2011-10-01

Full Text Available BACKGROUND: Stool examination by counting eggs per gram of feces (EPGs is the best method to estimate worm burden of Clonorchis sinensis in infected humans. The present study investigated a correlation between EPGs and worm burden in human clonorchiasis. METHODS AND FINDINGS: A total of 60 residents, 50 egg-positive and 10 egg-negative, in Sancheong-gun, Korea, participated in this worm collection trial in 2006-2009. They were diagnosed by egg positivity in feces using the Kato-Katz method. After administration of praziquantel, they were purged with cathartics on the next day, and then discharged adult worms were collected from their feces. Their EPGs ranged from 0 to 65,544. Adult worms of C. sinensis were collected from 17 egg-positive cases, and the number of worms ranged from 1 to 114 in each individual. A positive correlation between EPGs and numbers of worms was demonstrated (r = 0.681, P<0.001. Worm recovery rates were 9.7% in cases of EPGs 1-1,000 and 73.7% in those of EPGs over 1,000. No worms were detected from egg-negative subjects. Maximum egg count per worm per day was roughly estimated 3,770 in a subject with EPGs 2,664 and 106 collected worms. CONCLUSIONS: The numbers of the worms are significantly correlated with the egg counts in human clonorchiasis. It is estimated that at least 110 worms are infected in a human body with EPGs around 3,000, and egg productivity of a worm per day is around 4,000.

QuantWorm: a comprehensive software package for Caenorhabditis elegans phenotypic assays.

Directory of Open Access Journals (Sweden)

Sang-Kyu Jung

Full Text Available Phenotypic assays are crucial in genetics; however, traditional methods that rely on human observation are unsuitable for quantitative, large-scale experiments. Furthermore, there is an increasing need for comprehensive analyses of multiple phenotypes to provide multidimensional information. Here we developed an automated, high-throughput computer imaging system for quantifying multiple Caenorhabditis elegans phenotypes. Our imaging system is composed of a microscope equipped with a digital camera and a motorized stage connected to a computer running the QuantWorm software package. Currently, the software package contains one data acquisition module and four image analysis programs: WormLifespan, WormLocomotion, WormLength, and WormEgg. The data acquisition module collects images and videos. The WormLifespan software counts the number of moving worms by using two time-lapse images; the WormLocomotion software computes the velocity of moving worms; the WormLength software measures worm body size; and the WormEgg software counts the number of eggs. To evaluate the performance of our software, we compared the results of our software with manual measurements. We then demonstrated the application of the QuantWorm software in a drug assay and a genetic assay. Overall, the QuantWorm software provided accurate measurements at a high speed. Software source code, executable programs, and sample images are available at www.quantworm.org. Our software package has several advantages over current imaging systems for C. elegans. It is an all-in-one package for quantifying multiple phenotypes. The QuantWorm software is written in Java and its source code is freely available, so it does not require use of commercial software or libraries. It can be run on multiple platforms and easily customized to cope with new methods and requirements.

Screw-worm eradication in the Americas - Overview

International Nuclear Information System (INIS)

Wyss, John H.

2000-01-01

Screw-worms (Cochliomyia hominivorax, Coquerel) are found only in the Americas, and are known, therefore, as the New World Screw-worm (NWS). The larval stages of the fly feed on the living flesh of their host. A screw-worm infestation can kill an adult animal in 7-10 days if not treated. All warm-blooded animals are affected including man. Although screw-worms had long been recognised as a severe pest of animals in the southwestern United States, they had never been detected east of the Mississippi River before 1933. In July 1933, screw-worms were transported on infested cattle to Georgia and became established east of the Mississippi River. Screw-worms spread quickly in the southeastern United States and were able to overwinter in southern Florida. Being new to the region, they were quickly recognised as a severe pest with a tremendous economic impact on livestock production. The livestock owners in the southeastern United States immediately noticed an increase in the number of animal deaths and increased costs of insecticides, veterinary medicines, veterinary services, inspection and handling. At the same time, they observed a decrease in animal weights and in milk production. Due to these observations, the livestock industry in the southeastern United States requested help in controlling screw-worms. Because of these requests, the research community became interested in control and eradication measures for this pest. Early work by Crushing and Patton in 1933 recognised that C. hominivorax was an obligatory animal parasite and different from the secondary blowfly, Cochliomyia macellaria. In 1934, the US Department of Agriculture (USDA), Agricultural Research Service (ARS) opened a research station in Valdosa, Georgia, and E.W. Laake and E.F. Knipling were assigned to work there. In September 1935, R.C. Bushland was hired by ARS to do research related to screw-worms at an ARS Research Laboratory in Dallas, Texas. Melvin and Bushland in 1936 developed artificial

Worm epidemics in wireless ad hoc networks

Energy Technology Data Exchange (ETDEWEB)

Nekovee, Maziar [BT Research, Polaris 134, Adastral Park, Martlesham, Suffolk IP5 3RE (United Kingdom); Centre for Computational Science, University College London, 20 Gordon Street, London WC1H 0AJ (United Kingdom)

2007-06-15

A dramatic increase in the number of computing devices with wireless communication capability has resulted in the emergence of a new class of computer worms which specifically target such devices. The most striking feature of these worms is that they do not require Internet connectivity for their propagation but can spread directly from device to device using a short-range radio communication technology, such as WiFi or Bluetooth. In this paper, we develop a new model for epidemic spreading of these worms and investigate their spreading in wireless ad hoc networks via extensive Monte Carlo simulations. Our studies show that the threshold behaviour and dynamics of worm epidemics in these networks are greatly affected by a combination of spatial and temporal correlations which characterize these networks, and are significantly different from the previously studied epidemics in the Internet.

Worm epidemics in wireless ad hoc networks

Science.gov (United States)

Nekovee, Maziar

2007-06-01

A dramatic increase in the number of computing devices with wireless communication capability has resulted in the emergence of a new class of computer worms which specifically target such devices. The most striking feature of these worms is that they do not require Internet connectivity for their propagation but can spread directly from device to device using a short-range radio communication technology, such as WiFi or Bluetooth. In this paper, we develop a new model for epidemic spreading of these worms and investigate their spreading in wireless ad hoc networks via extensive Monte Carlo simulations. Our studies show that the threshold behaviour and dynamics of worm epidemics in these networks are greatly affected by a combination of spatial and temporal correlations which characterize these networks, and are significantly different from the previously studied epidemics in the Internet.

Worm epidemics in wireless ad hoc networks

International Nuclear Information System (INIS)

Nekovee, Maziar

2007-01-01

A dramatic increase in the number of computing devices with wireless communication capability has resulted in the emergence of a new class of computer worms which specifically target such devices. The most striking feature of these worms is that they do not require Internet connectivity for their propagation but can spread directly from device to device using a short-range radio communication technology, such as WiFi or Bluetooth. In this paper, we develop a new model for epidemic spreading of these worms and investigate their spreading in wireless ad hoc networks via extensive Monte Carlo simulations. Our studies show that the threshold behaviour and dynamics of worm epidemics in these networks are greatly affected by a combination of spatial and temporal correlations which characterize these networks, and are significantly different from the previously studied epidemics in the Internet

Extreme longevity in a deep-sea vestimentiferan tubeworm and its implications for the evolution of life history strategies

Science.gov (United States)

Durkin, Alanna; Fisher, Charles R.; Cordes, Erik E.

2017-08-01

The deep sea is home to many species that have longer life spans than their shallow-water counterparts. This trend is primarily related to the decline in metabolic rates with temperature as depth increases. However, at bathyal depths, the cold-seep vestimentiferan tubeworm species Lamellibrachia luymesi and Seepiophila jonesi reach extremely old ages beyond what is predicted by the simple scaling of life span with body size and temperature. Here, we use individual-based models based on in situ growth rates to show that another species of cold-seep tubeworm found in the Gulf of Mexico, Escarpia laminata, also has an extraordinarily long life span, regularly achieving ages of 100-200 years with some individuals older than 300 years. The distribution of results from individual simulations as well as whole population simulations involving mortality and recruitment rates support these age estimates. The low 0.67% mortality rate measurements from collected populations of E. laminata are similar to mortality rates in L. luymesi and S. jonesi and play a role in evolution of the long life span of cold-seep tubeworms. These results support longevity theory, which states that in the absence of extrinsic mortality threats, natural selection will select for individuals that senesce slower and reproduce continually into their old age.

Worm Disease Profile of Primary School Children

Science.gov (United States)

Hartati; Destriani; Victoria, A. R.

2018-01-01

The result of an elementary study of relations between disease symptoms and signs with the wormy occurrence child at Elementary School in Ilir Barat II Subdistrict of Palembang in concerned in this research amount to 200 people from the population of 4200 people of a child in elementary school. The result indicates that the child roommates infested worm marked with a few symptoms like passion eat to Decrease the puking pain in the home of stomach after eating, diarrhea, defecate with the mucus and bleed the purities at the anus before controlled from some worm type of there no difference having a meaning between child roommates worm infested with the child roommates do not infest worm (P > 0.05). Symptom vomit got more amount by having a meaning a child by infested is Trichuris (RO > 2.669, P < 0/005). The result of infested Tricuris generate the more amount of symptoms lust to eat to Decrease by having a meaning of Compared to the which do not infest Trichuris (RO = 3.772; CI 95% = 1.214 to 11.726; P = 0.016) symptoms lust to eat to Decrease and more amount diarrhea got at Infest oxyuris with the special sign of purities at nighttime anus (RO = 0.557; 85% CI = 0.166 to 2.168). The risk of the happening of unfavorable nutrition According to BB / U and Also TB / U growing niche to more amount (having a meaning) at child roommates worm infested by a child Compared to the which do not infest worm.

Worm gear efficiency model considering misalignment in electric power steering systems

Directory of Open Access Journals (Sweden)

S. H. Kim

2018-05-01

Full Text Available This study proposes a worm gear efficiency model considering misalignment in electric power steering systems. A worm gear is used in Column type Electric Power Steering (C-EPS systems and an Anti-Rattle Spring (ARS is employed in C-EPS systems in order to prevent rattling when the vehicle goes on a bumpy road. This ARS plays a role of preventing rattling by applying preload to one end of the worm shaft but it also generates undesirable friction by causing misalignment of the worm shaft. In order to propose the worm gear efficiency model considering misalignment, geometrical and tribological analyses were performed in this study. For geometrical analysis, normal load on gear teeth was calculated using output torque, pitch diameter of worm wheel, lead angle and normal pressure angle and this normal load was converted to normal pressure at the contact point. Contact points between the tooth flanks of the worm and worm wheel were obtained by mathematically analyzing the geometry, and Hertz's theory was employed in order to calculate contact area at the contact point. Finally, misalignment by an ARS was also considered into the geometry. Friction coefficients between the tooth flanks were also researched in this study. A pin-on-disk type tribometer was set up to measure friction coefficients and friction coefficients at all conditions were measured by the tribometer. In order to validate the worm gear efficiency model, a worm gear was prepared and the efficiency of the worm gear was predicted by the model. As the final procedure of the study, a worm gear efficiency measurement system was set and the efficiency of the worm gear was measured and the results were compared with the predicted results. The efficiency considering misalignment gives more accurate results than the efficiency without misalignment.

Evolution of Scale Worms

DEFF Research Database (Denmark)

Gonzalez, Brett Christopher

) caves, and the interstitium, recovering six monophyletic clades within Aphroditiformia: Acoetidae, Aphroditidae, Eulepethidae, Iphionidae, Polynoidae, and Sigalionidae (inclusive of the former ‘Pisionidae’ and ‘Pholoidae’), respectively. Tracing of morphological character evolution showed a high degree...... of adaptability and convergent evolution between relatively closely related scale worms. While some morphological and behavioral modifications in cave polynoids reflected troglomorphism, other modifications like eye loss were found to stem from a common ancestor inhabiting the deep sea, further corroborating...... the deep sea ancestry of scale worm cave fauna. In conclusion, while morphological characterization across Aphroditiformia appears deceptively easy due to the presence of elytra, convergent evolution during multiple early radiations across wide ranging habitats have confounded our ability to reconstruct...

A calibration mechanism based on worm drive for space telescope

Science.gov (United States)

Chong, Yaqin; Li, Chuang; Xia, Siyu; Zhong, Peifeng; Lei, Wang

2017-08-01

In this paper, a new type of calibration mechanism based on worm drive is presented for a space telescope. This calibration mechanism based on worm drive has the advantages of compact size and self-lock. The mechanism mainly consists of thirty-six LEDs as the light source for flat calibration, a diffuse plate, a step motor, a worm gear reducer and a potentiometer. As the main part of the diffuse plate, a PTFE tablet is mounted in an aluminum alloy frame. The frame is fixed on the shaft of the worm gear, which is driven by the step motor through the worm. The shaft of the potentiometer is connected to that of the worm gear to measure the rotation angle of the diffuse plate through a flexible coupler. Firstly, the calibration mechanism is designed, which includes the LEDs assembly design, the worm gear reducer design and the diffuse plate assembly design. The counterweight blocks and two end stops are also designed for the diffuse plate assembly. Then a modal analysis with finite element method for the diffuse plate assembly is completed.

NEDAC: A worm countermeasure mechanism | Ahmad | Science ...

African Journals Online (AJOL)

This article presents an Internet worm countermeasure mechanism that uses DNS activities as a behavioural technique to detect worm propagation. The mechanism also uses a data-link containment solution to block traffic from an infected host. The concept has been demonstrated using a developed prototype and tested in ...

Transfer of adult Strongylus vulgaris via stomach tube.

Science.gov (United States)

Hofing, G L; Bennett, D G

1983-10-01

Patent infections with Strongylus vulgaris were established in 6 of 8 helminth-free ponies given 41 to 101 adult worms via nasogastric tube. The parasites were removed from the cecum and ventral colon and transferred within 1 to 2 hours of the death of the donor horses. Eggs were found in the feces of the recipients in 2 or 3 days; egg counts reached maximum, 28 eggs per gram of feces, at 4 weeks after ponies were inoculated. In 6 ponies euthanatized 3 to 7 weeks after parasitic transfers were done, 28% of the inoculated worms were found alive at necropsy. A 7th pony was maintained as a donor for establishing infections for chemotherapy trials and, although never passing more than 6 eggs per gram of feces, shed infective larvae over a period of 2 years.

Viability of developmental stages of Schistosoma mansoni quantified with xCELLigence worm real-time motility assay (xWORM

Directory of Open Access Journals (Sweden)

Gabriel Rinaldi

2015-12-01

Full Text Available Infection with helminth parasites causes morbidity and mortality in billions of people and livestock worldwide. Where anthelmintic drugs are available, drug resistance is a major problem in livestock parasites, and a looming threat to public health. Monitoring the efficacy of these medicines and screening for new drugs has been hindered by the lack of objective, high-throughput approaches. Several cell monitoring technologies have been adapted for parasitic worms, including video-, fluorescence-, metabolism enzyme- and impedance-based tools that minimize the screening bottleneck. Using the xCELLigence impedance-based system we previously developed a motility-viability assay that is applicable for a range of helminth parasites. Here we have improved substantially the assay by using diverse frequency settings, and have named it the xCELLigence worm real-time motility assay (xWORM. By utilizing strictly standardized mean difference analysis we compared the xWORM output measured with 10, 25 and 50 kHz frequencies to quantify the motility of schistosome adults (human blood flukes and hatching of schistosome eggs. Furthermore, we have described a novel application of xWORM to monitor movement of schistosome cercariae, the developmental stage that is infectious to humans. For all three stages, 25 kHz was either optimal or near-optimal for monitoring and quantifying schistosome motility. These improvements in methodology sensitivity should enhance the capacity to screen small compound libraries for new drugs both for schistosomes and other helminth pathogens at large.

Dual-worm screw compressors; Compresseurs bi-vis

Energy Technology Data Exchange (ETDEWEB)

Baleydier, J P [Bitzer France, 69 - Lyon (France)

1998-12-31

Low power worm-screw moto-compressors are used in any king of refrigerating machineries and more and more in air conditioning systems. This paper presents the principle of dual-screw moto-compressors: worm-screw technology, role of oil (lubrication, tightness, cooling), compression, internal pressure, power reduction, lubrication, economizer, operation, model selection and accessories. (J.S.)

Dual-worm screw compressors; Compresseurs bi-vis

Energy Technology Data Exchange (ETDEWEB)

Baleydier, J.P. [Bitzer France, 69 - Lyon (France)

1997-12-31

Low power worm-screw moto-compressors are used in any king of refrigerating machineries and more and more in air conditioning systems. This paper presents the principle of dual-screw moto-compressors: worm-screw technology, role of oil (lubrication, tightness, cooling), compression, internal pressure, power reduction, lubrication, economizer, operation, model selection and accessories. (J.S.)

First record of the sipunculan worm Phascolion (Phascolion caupo Hendrix, 1975 in the Mediterranean Sea

Directory of Open Access Journals (Sweden)

L.M. FERRERO-VICENTE

2012-04-01

Full Text Available Specimens of the sipunculan worm Phascolion (Phascolion caupo Hendrix, 1975 have been collected for the first time in the Mediterranean Sea, thus increasing the number of known sipunculan species of up to 36 in this area. They were encountered on soft bottoms from the coast of San Pedro del Pinatar (Western Mediterranean. Thirty specimens were collected at a depth ranging from 32.6 to 37.2 m, mainly in sandy substrata with high load of silt and clays. 80% of the individuals were found inhabiting empty shells of gastropods or empty tubes of serpulid polychaetes.

The theory and practice of worm gear drives

CERN Document Server

Dudás, Ilés

2005-01-01

Worm gears are special gears that resemble screws, and can be used to drive other gears. Worm gears, enable two non-touching shafts in a machine to mesh (join) together. This publication, unique in that it combines both theoretical and practical design aspects, including the latest results of research and development, provides detailed treatment of the theory and production of worm drives, as well as the overarching subject of production geometry of helicoidal surfaces.Included are mathematical models for a number of practical applications; a description of dressing equipment r

Dynamics of cell proliferation and apoptosis reflect different life strategies in hydrothermal vent and cold seep vestimentiferan tubeworms.

Science.gov (United States)

Pflugfelder, Bettina; Cary, S Craig; Bright, Monika

2009-07-01

Deep-sea vestimentiferan tubeworms, which live in symbiosis with bacteria, exhibit different life strategies according to their habitat. At unstable and relatively short-lived hydrothermal vents, they grow extremely fast, whereas their close relatives at stable and long-persisting cold seeps grow slowly and live up to 300 years. Growth and age differences are thought to occur because of ecological and physiological adaptations. However, the underlying mechanisms of cell proliferation and death, which are closely linked to homeostasis, growth, and longevity, are unknown. Here, we show by immunohistochemical and ultrastructural cell cycle analyses that cell proliferation activities of the two species studied are higher than in any other characterized invertebrate, being only comparable with tumor and wound-healing processes. The slow growth in Lamellibrachia luymesi from cold seeps results from balanced activities of proliferation and apoptosis in the epidermis. In contrast, Riftia pachyptila from hydrothermal vents grows fast because apoptosis is down-regulated in this tissue. The symbiont-housing organ, the trophosome, exhibits a complex cell cycle and terminal differentiation pattern in both species, and growth is regulated by proliferation. These mechanisms have similarities to the up- and down-regulation of proliferation or apoptosis in various types of tumor, although they occur in healthy animals in this study, thus providing significant insights into the underlying mechanisms of growth and longevity.

Spread and Control of Mobile Benign Worm Based on Two-Stage Repairing Mechanism

Directory of Open Access Journals (Sweden)

Meng Wang

2014-01-01

Full Text Available Both in traditional social network and in mobile network environment, the worm is a serious threat, and this threat is growing all the time. Mobile smartphones generally promote the development of mobile network. The traditional antivirus technologies have become powerless when facing mobile networks. The development of benign worms, especially active benign worms and passive benign worms, has become a new network security measure. In this paper, we focused on the spread of worm in mobile environment and proposed the benign worm control and repair mechanism. The control process of mobile benign worms is divided into two stages: the first stage is rapid repair control, which uses active benign worm to deal with malicious worm in the mobile network; when the network is relatively stable, it enters the second stage of postrepair and uses passive mode to optimize the environment for the purpose of controlling the mobile network. Considering whether the existence of benign worm, we simplified the model and analyzed the four situations. Finally, we use simulation to verify the model. This control mechanism for benign worm propagation is of guiding significance to control the network security.

Intestinal Worm Infestation and Anaemia in Pregnant Women

Directory of Open Access Journals (Sweden)

Krishna Bahadur Raut

2016-03-01

Conclusions: Aanaemia is prevalent in pregnant women of PHCRC, chapagaun and there was a significant correlation between anaemia and worm infestation. However, the relation among the haemoglobin level, iron, folic acid and albendazole was not significant. Keywords: anaemia; infestation; pregnant women; worm. | PubMed

Towards global Guinea worm eradication in 2015: the experience of South Sudan.

Science.gov (United States)

Awofeso, Niyi

2013-08-01

For centuries, the Guinea worm parasite (Dracunculus medinensis) has caused disabling misery, infecting people who drink stagnant water contaminated with the worm's larvae. In 2012, there were 542 cases of Guinea worm reported globally, of which 521 (96.1%) were reported in South Sudan. Protracted civil wars, an inadequate workforce, neglect of potable water provision programs, suboptimal Guinea worm surveillance and case containment, and fragmented health systems account for many of the structural and operational factors encumbering South Sudan's Guinea worm eradication efforts. This article reviews the impacts of six established Guinea worm control strategies in South Sudan: (1) surveillance to determine actual caseload distribution and trends in response to control measures; (2) educating community members from whom worms are emerging to avoid immersing affected parts in sources of drinking water; (3) filtering potentially contaminated drinking water using cloth filters or filtered drinking straws; (4) treating potentially contaminated surface water with the copepod larvicide temephos (Abate); (5) providing safe drinking water from boreholes or hand-dug wells; and (6) containment of transmission through voluntary isolation of each patient to prevent contamination of drinking water sources, provision of first aid, and manual extraction of the worm. Surveillance, community education, potable water provision, and case containment remain weak facets of the program. Abate pesticide is not a viable option for Guinea worm control in South Sudan. In light of current case detection and containment trends, as well as capacity building efforts for Guinea worm eradication, South Sudan is more likely to eradicate Guinea worm by 2020, rather than by 2015. The author highlights areas in which substantial improvements are required in South Sudan's Guinea worm eradication program, and suggests improvement strategies. Copyright © 2013 International Society for Infectious

Social behaviour and collective motion in plant-animal worms.

Science.gov (United States)

Franks, Nigel R; Worley, Alan; Grant, Katherine A J; Gorman, Alice R; Vizard, Victoria; Plackett, Harriet; Doran, Carolina; Gamble, Margaret L; Stumpe, Martin C; Sendova-Franks, Ana B

2016-02-24

Social behaviour may enable organisms to occupy ecological niches that would otherwise be unavailable to them. Here, we test this major evolutionary principle by demonstrating self-organizing social behaviour in the plant-animal, Symsagittifera roscoffensis. These marine aceol flat worms rely for all of their nutrition on the algae within their bodies: hence their common name. We show that individual worms interact with one another to coordinate their movements so that even at low densities they begin to swim in small polarized groups and at increasing densities such flotillas turn into circular mills. We use computer simulations to: (i) determine if real worms interact socially by comparing them with virtual worms that do not interact and (ii) show that the social phase transitions of the real worms can occur based only on local interactions between and among them. We hypothesize that such social behaviour helps the worms to form the dense biofilms or mats observed on certain sun-exposed sandy beaches in the upper intertidal of the East Atlantic and to become in effect a super-organismic seaweed in a habitat where macro-algal seaweeds cannot anchor themselves. Symsagittifera roscoffensis, a model organism in many other areas in biology (including stem cell regeneration), also seems to be an ideal model for understanding how individual behaviours can lead, through collective movement, to social assemblages. © 2016 The Author(s).

The effect of operating conditions on aquatic worms eating waste sludge

NARCIS (Netherlands)

Hendrickx, T.L.G.; Temmink, H.; Elissen, H.J.H.; Buisman, C.J.N.

2009-01-01

Several techniques are available for dealing with the waste sludge produced in biological waste water treatment. A biological approach uses aquatic worms to consume and partially digest the waste sludge. In our concept for a worm reactor, the worms (Lumbriculus variegatus) are immobilised in a

Age-related worm load and worm fecundity patterns in human populations, as indicated by schistosome circulating antigens

Directory of Open Access Journals (Sweden)

Polman Katja

1998-01-01

Full Text Available Recently, our group determined the relationship between serum CAA levels and fecal egg counts in two foci with very intense Schistosoma mansoni transmission: Maniema (Zaire, an area endemic for S. mansoni since several decades, and Ndombo (Senegal, where transmission has only been established since a few years. The objective was to study and compare age-related worm load and worm fecundity patterns in these two different endemic settings. Here, we will summarize the most important findings and conclusions of this study.

Weird and wonderful worms

NARCIS (Netherlands)

Wassink, J.

2015-01-01

In the WaterLab, biotechnologist Steef de Valk is carrying out experiments with tubifex worms. These threadlike creatures are capable of reducing by half the quantity of sewage sludge from water treatment. No-one really understands how this works.

Hop-by-HopWorm Propagation with Carryover Epidemic Model in Mobile Sensor Networks

Directory of Open Access Journals (Sweden)

Jun-Won Ho

2015-10-01

Full Text Available In the internet, a worm is usually propagated in a random multi-hop contact manner. However, the attacker will not likely select this random multi-hop propagation approach in a mobile sensor network. This is because multi-hop worm route paths to random vulnerable targets can be often breached due to node mobility, leading to failure of fast worm spread under this strategy. Therefore, an appropriate propagation strategy is needed for mobile sensor worms. To meet this need, we discuss a hop-by-hop worm propagation model in mobile sensor networks. In a hop-by-hop worm propagation model, benign nodes are infected by worm in neighbor-to-neighbor spread manner. Since worm infection occurs in hop-by-hop contact, it is not substantially affected by a route breach incurred by node mobility. We also propose the carryover epidemic model to deal with the worm infection quota deficiency that might occur when employing an epidemic model in a mobile sensor network. We analyze worm infection capability under the carryover epidemic model. Moreover, we simulate hop-by-hop worm propagation with carryover epidemic model by using an ns-2 simulator. The simulation results demonstrate that infection quota carryovers are seldom observed where a node’s maximum speed is no less than 20 m/s.

Promoting positive health behaviours--'tooth worm' phenomenon and its implications.

Science.gov (United States)

Gao, X L; Hsu, C Y S; Xu, Y C; Loh, T; Koh, D; Hwarng, H B

2012-03-01

'Tooth worm' is a traditional belief about the pathogen of dental caries (tooth decay). Nevertheless, in our previous study, parental 'tooth worm' belief was linked to a reduced caries risk of their children. This study aimed to further characterize the impact of parental 'tooth worm' belief on their children's caries experience and its psychobehavioural mechanisms. analytic observational study. Thirteen randomly selected kindergartens in Singapore. 1,782 preschoolers aged 3-6 years. Each child received an oral examination and microbiological tests. Parents completed a self-administered questionnaire on their socio-demographic background, oral health knowledge/attitude and child's oral health habits. Multivariate analysis confirmed a reduced chance of 'high caries rate' (number of affected teeth > 2) among children whose parents held the 'tooth worm' belief (Odds Ratio = 0.41; 95% Confidence Interval = 0.19-0.89). With such perception among parents, children brushed their teeth more frequently (p = 0.042). Since no difference in oral hygiene was observed, the health benefit of the "tooth worm" perception may be acquired through the delivery of fluoride (an agent with proven anti-caries effect) during frequent toothbrushing episodes. This study revealed a 'tooth worm' phenomenon, indicating that parental 'tooth worm' belief is associated with early establishment of regular toothbrushing habit and reduction of dental caries in children. This phenomenon and its psychobehavioural mechanisms, enriching our understanding of oral health behaviours, have implications for effective health education.

Global dynamics of a novel multi-group model for computer worms

International Nuclear Information System (INIS)

Gong Yong-Wang; Song Yu-Rong; Jiang Guo-Ping

2013-01-01

In this paper, we study worm dynamics in computer networks composed of many autonomous systems. A novel multi-group SIQR (susceptible-infected-quarantined-removed) model is proposed for computer worms by explicitly considering anti-virus measures and the network infrastructure. Then, the basic reproduction number of worm R 0 is derived and the global dynamics of the model are established. It is shown that if R 0 is less than or equal to 1, the disease-free equilibrium is globally asymptotically stable and the worm dies out eventually, whereas, if R 0 is greater than 1, one unique endemic equilibrium exists and it is globally asymptotically stable, thus the worm persists in the network. Finally, numerical simulations are given to illustrate the theoretical results. (general)

Basic definitions for discrete modeling of computer worms epidemics

Directory of Open Access Journals (Sweden)

Pedro Guevara López

2015-01-01

Full Text Available The information technologies have evolved in such a way that communication between computers or hosts has become common, so much that the worldwide organization (governments and corporations depends on it; what could happen if these computers stop working for a long time is catastrophic. Unfortunately, networks are attacked by malware such as viruses and worms that could collapse the system. This has served as motivation for the formal study of computer worms and epidemics to develop strategies for prevention and protection; this is why in this paper, before analyzing epidemiological models, a set of formal definitions based on set theory and functions is proposed for describing 21 concepts used in the study of worms. These definitions provide a basis for future qualitative research on the behavior of computer worms, and quantitative for the study of their epidemiological models.

Mathematical description of tooth flank surface of globoidal worm gear with straight axial tooth profile

Science.gov (United States)

Połowniak, Piotr; Sobolak, Mariusz

2017-12-01

In this article, a mathematical description of tooth flank surface of the globoidal worm and worm wheel generated by the hourglass worm hob with straight tooth axial profile is presented. The kinematic system of globoidal worm gear is shown. The equation of globoid helix and tooth axial profile of worm is derived to determine worm tooth surface. Based on the equation of meshing the contact lines are obtained. The mathematical description of globoidal worm wheel tooth flank is performed on the basis of contact lines and generating the tooth side by the extreme cutting edge of worm hob. The presented mathematical model of tooth flank of TA worm and worm wheel can be used e.g. to analyse the contact pattern of the gear.

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how the

Worm plot to diagnose fit in quantile regression

NARCIS (Netherlands)

Buuren, S. van

2007-01-01

The worm plot is a series of detrended Q-Q plots, split by covariate levels. The worm plot is a diagnostic tool for visualizing how well a statistical model fits the data, for finding locations at which the fit can be improved, and for comparing the fit of different models. This paper shows how

Mathematical model for spreading dynamics of social network worms

International Nuclear Information System (INIS)

Sun, Xin; Liu, Yan-Heng; Han, Jia-Wei; Liu, Xue-Jie; Li, Bin; Li, Jin

2012-01-01

In this paper, a mathematical model for social network worm spreading is presented from the viewpoint of social engineering. This model consists of two submodels. Firstly, a human behavior model based on game theory is suggested for modeling and predicting the expected behaviors of a network user encountering malicious messages. The game situation models the actions of a user under the condition that the system may be infected at the time of opening a malicious message. Secondly, a social network accessing model is proposed to characterize the dynamics of network users, by which the number of online susceptible users can be determined at each time step. Several simulation experiments are carried out on artificial social networks. The results show that (1) the proposed mathematical model can well describe the spreading dynamics of social network worms; (2) weighted network topology greatly affects the spread of worms; (3) worms spread even faster on hybrid social networks

Metagenomic Analysis of Microbial Symbionts in a Gutless Worm

Energy Technology Data Exchange (ETDEWEB)

Woyke, Tanja; Teeling, Hanno; Ivanova, Natalia N.; Hunteman, Marcel; Richter, Michael; Gloeckner, Frank Oliver; Boeffelli, Dario; Barry, Kerrie W.; Shapiro, Harris J.; Anderson, Iain J.; Szeto, Ernest; Kyrpides, Nikos C.; Mussmann, Marc; Amann, Rudolf; Bergin, Claudia; Ruehland, Caroline; Rubin, Edward M.; Dubilier, Nicole

2006-05-01

Symbioses between bacteria and eukaryotes are ubiquitous, yet our understanding of the interactions driving these associations is hampered by our inability to cultivate most host-associated microbes. Here we use a metagenomic approach to describe four co-occurring symbionts from the marine oligochaete Olavius algarvensis, a worm lacking a mouth, gut and nephridia. Shotgun sequencing and metabolic pathway reconstruction revealed that the symbionts are sulphur-oxidizing and sulphate-reducing bacteria, all of which are capable of carbon fixation, thus providing the host with multiple sources of nutrition. Molecular evidence for the uptake and recycling of worm waste products by the symbionts suggests how the worm could eliminate its excretory system, an adaptation unique among annelid worms. We propose a model that describes how the versatile metabolism within this symbiotic consortium provides the host with an optimal energy supply as it shuttles between the upper oxic and lower anoxic coastal sediments that it inhabits.

WORM: A general-purpose input deck specification language

International Nuclear Information System (INIS)

Jones, T.

1999-01-01

Using computer codes to perform criticality safety calculations has become common practice in the industry. The vast majority of these codes use simple text-based input decks to represent the geometry, materials, and other parameters that describe the problem. However, the data specified in input files are usually processed results themselves. For example, input decks tend to require the geometry specification in linear dimensions and materials in atom or weight fractions, while the parameter of interest might be mass or concentration. The calculations needed to convert from the item of interest to the required parameter in the input deck are usually performed separately and then incorporated into the input deck. This process of calculating, editing, and renaming files to perform a simple parameter study is tedious at best. In addition, most computer codes require dimensions to be specified in centimeters, while drawings or other materials used to create the input decks might be in other units. This also requires additional calculation or conversion prior to composition of the input deck. These additional calculations, while extremely simple, introduce a source for error in both the calculations and transcriptions. To overcome these difficulties, WORM (Write One, Run Many) was created. It is an easy-to-use programming language to describe input decks and can be used with any computer code that uses standard text files for input. WORM is available, via the Internet, at worm.lanl.gov. A user's guide, tutorials, example models, and other WORM-related materials are also available at this Web site. Questions regarding WORM should be directed to wormatlanl.gov

Performance Analysis of Cell-Phone Worm Spreading in Cellular Networks through Opportunistic Communications

Directory of Open Access Journals (Sweden)

YAHUI, W.

2012-05-01

Full Text Available Worms spreading directly between cell-phones over short-range radio (Bluetooth, WiFi, etc. are increasing rapidly. Communication by these technologies is opportunistic and has very close relation with the social characteristics of the phone carriers. In this paper, we try to evaluate the impact of different characteristics on the spreading performance of worms. On the other hand, the behaviors of worms may have certain impact, too. For example, worms may make phones be completely dysfunctional and these phones can be seen as killed. We study the impact of the killing speed. Using the Markov model, we propose some theoretical models to evaluate the spreading performance in different cases. Simulation results show the accuracy of our models. Numerical results show that if users do not believe the data coming from others easily, the worms may bring less damage. Surprisingly, if the users are more willing to install the anti-virus software, the worms may bring bigger damage when the software becomes to be outdated with high probability. Though the worms can bring big damage on the network temporarily by killing phones rapidly, numerical results show that this behavior may decrease the total damage in the long time. Therefore, killing nodes more rapidly may be not optimal for worms.

The opportunistic transmission of wireless worms between mobile devices

Science.gov (United States)

Rhodes, C. J.; Nekovee, M.

2008-12-01

The ubiquity of portable wireless-enabled computing and communications devices has stimulated the emergence of malicious codes (wireless worms) that are capable of spreading between spatially proximal devices. The potential exists for worms to be opportunistically transmitted between devices as they move around, so human mobility patterns will have an impact on epidemic spread. The scenario we address in this paper is proximity attacks from fleetingly in-contact wireless devices with short-range communication range, such as Bluetooth-enabled smart phones. An individual-based model of mobile devices is introduced and the effect of population characteristics and device behaviour on the outbreak dynamics is investigated. The model uses straight-line motion to achieve population, though it is recognised that this is a highly simplified representation of human mobility patterns. We show that the contact rate can be derived from the underlying mobility model and, through extensive simulation, that mass-action epidemic models remain applicable to worm spreading in the low density regime studied here. The model gives useful analytical expressions against which more refined simulations of worm spread can be developed and tested.

Worm-it: converting organic wastes into sustainable fish feed by using aquatic worms

NARCIS (Netherlands)

Elissen, H.J.H.; Hendrickx, T.L.G.; Temmink, H.; Laarhoven, B.; Buisman, C.J.N.

2015-01-01

Due to overfishing and the use of one-third of wild fish catches for feeding farmed fish and livestock, there is a strong need for alternative sources of suitable proteins and lipids in fish feeds. Small freshwater worms of the species Lumbriculus variegatus can be such a source based on their high

Mobile agents affect worm spreading in wireless ad hoc networks

International Nuclear Information System (INIS)

Huang, Zi-Gang; Sun, Jin-Tu; Wang, Ying-Hai; Wang, Sheng-Jun; Xu, Xin-Jian

2009-01-01

Considering the dynamic nature of portable computing devices with wireless communication capability, an extended model is introduced for worm spreading in the wireless ad hoc network, with a population of mobile agents in a planar distribution, starting from an initial infected seed. The effect of agents' mobility on worm spreading is investigated via extensive Monte Carlo simulations. The threshold behavior and the dynamics of worm epidemics in the wireless networks are greatly affected by both agents' mobility and spatial and temporal correlations. The medium access control mechanism for the wireless communication promotes the sensitivity of the spreading dynamics to agents' mobility

Guinea Worm in a Frog

Centers for Disease Control (CDC) Podcasts

2017-03-09

Dr. Mark Eberhard, a retired parasitologist and CDC guest researcher, discusses Guinea worm infection in a wild-caught frog.  Created: 3/9/2017 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 3/9/2017.

Network protection against worms and cascading failures using modularity partitioning

NARCIS (Netherlands)

Omic, J.; Hernandez, J.M.; Van Mieghem, P.

2010-01-01

Communication networks are prone to virus and worms spreading and cascading failures. Recently, a number of social networking worms have spread over public Web sites. Another example is error propagation in routing tables, such as in BGP tables. The immunization and error curing applied to these

Shrimp aquaculture in low salinity water feeded with worm flavor

Directory of Open Access Journals (Sweden)

Wenceslao Valenzuela Quiñónez

2012-09-01

Full Text Available Shrimp aquaculture in Sinaloa is one of the top economic enterprises, generating many jobs and earns significant incomes every year. Shrimp feed is an essential part of maintaining healthy production. In this initial approach of shrimp growth in low salinity water, were tested two formulas of animal protein composed of 40% (APL1 and 20% (APL2 worm protein, a commercial diet, and no supplementary feed. Physicochemical parameters did not have a direct influence in shrimpbehavior. After six weeks of experimentation, shrimp fed with commercial diet had a weight gain 20% higher than those feed with worm protein. There were no significantly differences between sizes with respect to 40% animal protein and 20% animal protein with the commercial diet (P  0.05. However, shrimp fed worm protein had lower mortality. The use of worm protein could be an option to maintain a high quantity of shrimp reared in low salinity waters.

Red worm behavior (Eisenia spp. in vermicomposting systems of organic residues

Directory of Open Access Journals (Sweden)

Mamani-Mamani Gladys

2012-08-01

Full Text Available This work evaluates the behavior of the vermicomposting red worm (Eisenia spp. in two environments (greenhouse and unsheltered and with two solid organic substrates (cow manure=CM and kitchen waste=KW in the zone of Carmen Pampa, Nor Yungas Province, Department of La Paz – Bolivia, using a factorial design with two factors and three repetitions (ANOVA analysis. The largest number of cocoons was found in the greenhouse treatment, with 64 in CM and 41 in KW. Cocoon viability was also greatest in the greenhouse treatment, at 100% for CM and 96% for KW. Similarly, the greatest number of worms hatched from cocoons was in the greenhouse treatment, with 2 immature worms for CM and 3.5 for KW, and the greatest number of immature worms was registered in the greenhouse treatment with 123 individuals in CM and 16 in KW. The lowest mortality rate due to environment was in the greenhouse treatment, with 3.90% mortality with CM and 88.64% with KW. The greatest number of mature worms (with clitella was in the unsheltered treatment, with 15 in CM and 21 in KW. The greatest biomass of immature worms was found in the greenhouse treatment, with 1.41 g of worms for CM and 0.185 g for KW; however, the greatest biomass of mature worms was in the KW treatment, with 7.98 g for the greenhouse treatment and 6.93 g for the unsheltered treatment. The phytotoxicity from CM vermicompost in the two environments was lowest, exhibiting a 66.6% rate of germination, and the opposite was true for KW, which was the most toxic in both environments. Macronutrient content in vermicompost obtained was: nitrogen at 2.45% and 2.31%, phosphorus at 500 mg kg-1 and 220 mg kg-1 and potassium at 27.43 and 2.76 cmol(+ kg-1 of dry substrate in KW and CM respectively.

WormBase: Annotating many nematode genomes.

Science.gov (United States)

Howe, Kevin; Davis, Paul; Paulini, Michael; Tuli, Mary Ann; Williams, Gary; Yook, Karen; Durbin, Richard; Kersey, Paul; Sternberg, Paul W

2012-01-01

WormBase (www.wormbase.org) has been serving the scientific community for over 11 years as the central repository for genomic and genetic information for the soil nematode Caenorhabditis elegans. The resource has evolved from its beginnings as a database housing the genomic sequence and genetic and physical maps of a single species, and now represents the breadth and diversity of nematode research, currently serving genome sequence and annotation for around 20 nematodes. In this article, we focus on WormBase's role of genome sequence annotation, describing how we annotate and integrate data from a growing collection of nematode species and strains. We also review our approaches to sequence curation, and discuss the impact on annotation quality of large functional genomics projects such as modENCODE.

Modeling and Stability Analysis of Worm Propagation in Wireless Sensor Network

Directory of Open Access Journals (Sweden)

Liping Feng

2015-01-01

Full Text Available An improved SIRS model considering communication radius and distributed density of nodes is proposed. The proposed model captures both the spatial and temporal dynamics of worms spread process. Using differential dynamical theories, we investigate dynamics of worm propagation to time in wireless sensor networks (WSNs. Reproductive number which determines global dynamics of worm propagation in WSNs is obtained. Equilibriums and their stabilities are also found. If reproductive number is less than one, the infected fraction of the sensor nodes disappears and if the reproduction number is greater than one, the infected fraction asymptotically stabilizes at the endemic equilibrium. Based on the reproduction number, we discuss the threshold of worm propagation about communication radius and distributed density of nodes in WSNs. Finally, numerical simulations verify the correctness of theoretical analysis.

: acquired resistance in mice by implantation of young irradiated worms into the portal system

Directory of Open Access Journals (Sweden)

Paulo Marcos Z. Coelho

1989-02-01

Full Text Available In two distinct experiments, immature S. mansoni worms (LE strain, Belo Horizonte, Brazil, aged 20 days, obtained from the portal system of white outbred mice, were irradiated with 14 and 4 Krad, respectively. Afterwards, the worms were directly inoculated into the portal vein of normal mice. Inoculation was performed with 20 irradiated worms per animal. Fifty days after inoculation, the mice that received 4 and 14 Krad-irradiated worms and their respective controls were infected with S. mansoni cercariae (LE strain, by transcutaneous route. Twenty days after this challenge infection, the animals were sacrificed and perfused for mature irradiated (90-day-old and immature (20-day-old worm counts. Analysis of the results showed that statistically significant protection against cercariae occurred in both groups with irradiated worms.

Can aquatic worms enhance methane production from waste activated sludge?

NARCIS (Netherlands)

Serrano, Antonio; Hendrickx, Tim L.G.; Elissen, Hellen; Laarhoven, Bob; Buisman, Cees J.N.; Temmink, Hardy

2016-01-01

Although literature suggests that aquatic worms can help to enhance the methane production from excess activated sludge, clear evidence for this is missing. Therefore, anaerobic digestion tests were performed at 20 and at 30 °C with sludge from a high-loaded membrane bioreactor, the aquatic worm

Zoology: War of the Worms.

Science.gov (United States)

Telford, Maximilian J; Copley, Richard R

2016-04-25

The phylogenetic affinities of Xenacoelomorpha - the phylum comprising Xenoturbella bocki and acoelomorph worms - are debated. Two recent studies conclude they represent the earliest branching bilaterally symmetrical animals, but additional tests may be needed to confirm this notion. Copyright © 2016 Elsevier Ltd. All rights reserved.

Curcumin Generates Oxidative Stress and Induces Apoptosis in Adult Schistosoma mansoni Worms.

Directory of Open Access Journals (Sweden)

Daniela de Paula Aguiar

Full Text Available Inducing apoptosis is an interesting therapeutic approach to develop drugs that act against helminthic parasites. Researchers have investigated how curcumin (CUR, a biologically active compound extracted from rhizomes of Curcuma longa, affects Schistosoma mansoni and several cancer cell lines. This study evaluates how CUR influences the induction of apoptosis and oxidative stress in couples of adult S. mansoni worms. CUR decreased the viability of adult worms and killed them. The tegument of the parasite suffered morphological changes, the mitochondria underwent alterations, and chromatin condensed. Different apoptotic parameters were determined in an attempt to understand how CUR affected adult S. mansoni worms. CUR induced DNA damage and fragmentation and increased the expression of SmCASP3/7 transcripts and the activity of Caspase 3 in female and male worms. However, CUR did not intensify the activity of Caspase 8 in female or male worms. Evaluation of the superoxide anion and different antioxidant enzymes helped to explore the mechanism of parasite death further. The level of superoxide anion and the activity of Superoxide Dismutase (SOD increased, whereas the activity of Glutathione-S-Transferase (GST, Glutathione reductase (GR, and Glutathione peroxidase (GPX decreased, which culminated in the oxidation of proteins in adult female and male worms incubated with CUR. In conclusion, CUR generated oxidative stress followed by apoptotic-like-events in both adult female and male S. mansoni worms, ultimately killing them.

The life-cycle of the compost worm Eisenia ietida (Oligochaeta)

African Journals Online (AJOL)

161. The life-cycle of the compost worm Eisenia ietida (Oligochaeta). J.M. Venter* and A.J. Reinecke. Department of Zoology, Potchefstroom University for CHE, Potchefstroom, 2520 Republic of South Africa. Received 29 January, 1987; accepted 29 January 1988. To determine the full potential of the compost worm Eisenia ...

An Analysis Of Guinea Worm Infection On Yam Productivity In ...

African Journals Online (AJOL)

Guinea worm infection has been reported to be one of the external diseconomies factors that limit agricultural productivity of the rural farm households. The study examined the determinants of farmers' vulnerability to guineaworm infection and the effect of guinea worm infection on yam yield in the study area. A stratified ...

Worm Algorithm for CP(N-1) Model

CERN Document Server

Rindlisbacher, Tobias

2017-01-01

The CP(N-1) model in 2D is an interesting toy model for 4D QCD as it possesses confinement, asymptotic freedom and a non-trivial vacuum structure. Due to the lower dimensionality and the absence of fermions, the computational cost for simulating 2D CP(N-1) on the lattice is much lower than that for simulating 4D QCD. However, to our knowledge, no efficient algorithm for simulating the lattice CP(N-1) model has been tested so far, which also works at finite density. To this end we propose a new type of worm algorithm which is appropriate to simulate the lattice CP(N-1) model in a dual, flux-variables based representation, in which the introduction of a chemical potential does not give rise to any complications. In addition to the usual worm moves where a defect is just moved from one lattice site to the next, our algorithm additionally allows for worm-type moves in the internal variable space of single links, which accelerates the Monte Carlo evolution. We use our algorithm to compare the two popular CP(N-1) l...

Durability Characteristics Analysis of Plastic Worm Wheel with Glass Fiber Reinforced Polyamide.

Science.gov (United States)

Kim, Gun-Hee; Lee, Jeong-Won; Seo, Tae-Il

2013-05-10

Plastic worm wheel is widely used in the vehicle manufacturing field because it is favorable for weight lightening, vibration and noise reduction, as well as corrosion resistance. However, it is very difficult for general plastics to secure the mechanical properties that are required for vehicle gears. If the plastic resin is reinforced by glass fiber in the fabrication process of plastic worm wheel, it is possible to achieve the mechanical properties of metallic material levels. In this study, the mechanical characteristic analysis of the glass-reinforced plastic worm wheel, according to the contents of glass fiber, is performed by analytic and experimental methods. In the case of the glass fiber-reinforced resin, the orientation and contents of glass fibers can influence the mechanical properties. For the characteristic prediction of plastic worm wheel, computer-aided engineering (CAE) analysis processes such as structural and injection molding analysis were executed with the polyamide resin reinforcement glass fiber (25 wt %, 50 wt %). The injection mold for fabricating the prototype plastic worm wheel was designed and made to reflect the CAE analysis results. Finally, the durability of prototype plastic worm wheel fabricated by the injection molding process was evaluated by the experimental method and the characteristics according to the glass fiber contents.

Reproductive system abnormalities in Schistosoma mansoni adult worms isolated from Nectomys squamipes (Muridae: Sigmodontinae: brightfield and confocal laser scanning microscopy analysis

Directory of Open Access Journals (Sweden)

Neves Renata Heisler

2003-01-01

Full Text Available Schistosoma mansoni adult worms with genital anomalies isolated from Nectomys squamipes (Muridae: Sigmodontinae were studied by confocal laser scanning microscopy under the reflected mode. One male without testicular lobes (testicular agenesia/anorchism and two females, one with an atrophied ovary and another with 17 uterine eggs, were identified. The absence of testicular lobes occurred in a worm presenting otherwise normal male adult characteristics: tegument, tubercles and a gynaecophoric canal with spines. In both female specimens the digestive tube showed a vacuolated appearance, and the specimen with supernumerary uterine eggs exhibited a developing miracidium and an egg with a formed shell. The area of the ventral sucker was similar in both specimens however the tegument thickness, ovary and vitelline glands of the specimen with the atrophied ovary were smaller than those of the one with supernumerary eggs. These reported anomalies in the reproductive system call attention to the need to improve our understanding of genetic regulation and the possible role of environmental influences upon trematode development.

 Grunting for worms: reactions of Diplocardia to seismic vibrations

Science.gov (United States)

M.A. Callaham

2009-01-01

Harvesting earthworms by a practice called 'worm grunting' is a widespread and profitable business in the southeastern USA. Although a variety of techniques are used, most involve rhythmically scraping a wooden stake driven into the ground, with a fiat metal object. A common assumption is that vibrations cause the worms to surface, but this phenomenon has not...

Valorization of waste streams, "From food by-products to worm biomass"

NARCIS (Netherlands)

Laarhoven, B.; Elissen, H.J.H.; Temmink, B.G.; Buisman, C.J.N.

2013-01-01

A new technology is investigated to produce a high quality animal feed source by converting safe industrial food wastes into worm biomass. The freshwater worm Lumbriculus variegatus (common name: blackworm) has been selected for this purpose. This species can be used to reduce and concentrate

The research of hourglass worm dynamic balancing simulation based on SolidWorks motion

Science.gov (United States)

Wang, Zhuangzhuang; Yang, Jie; Liu, Pingyi; Zhao, Junpeng

2018-02-01

Hourglass worm is extensively used in industry due to its characteristic of heavy-load and a large reduction ratio. Varying sizes of unbalanced mass distribution appeared in the design of a single head worm. With machines developing towards higher speed and precision, the vibration and shock caused by the unbalanced mass distribution of rotating parts must be considered. Therefore, the balance grade of these parts must meet higher requirements. A method based on theoretical analysis and SolidWorks motion software simulation is presented in this paper; the virtual dynamic balance simulation test of the hourglass worm was carried out during the design of the product, so as to ensure that the hourglass worm meet the requirements of dynamic balance in the design process. This can effectively support the structural design of the hourglass worm and provide a way of thinking and designing the same type of products.

Intraocular live male filarial Loa loa worm

Directory of Open Access Journals (Sweden)

André Omgbwa Eballe

2009-02-01

Full Text Available André Omgbwa Eballe1, Emillienne Epée2, Godefroy Koki2, Didier Owono2, Côme Ebana Mvogo2, Assumpta Lucienne Bella21Gynaeco Obstetric and Paediatric Hospital of Yaoundé, Yaoundé, Cameroon; 2Faculty of Medicine and Biomedical Sciences, University of Yaoundé, Yaoundé, CameroonAbstract: We report a case of Loa loa filariasis in an 8-month-old child who presented with a 3-month history of irritated acute red eye and insomnia. Examination revealed a living and active adult Loa loa worm in the anterior chamber of the left eye. The worm was extracted under general anesthetic.Keywords: Loa loa, red eye, Cameroon

SCOPS and COWS--'worming it out of UK farmers'.

Science.gov (United States)

Taylor, M A

2012-05-04

Infections with gastrointestinal roundworms are an important cause of production losses in sheep and cattle. Worm control is a vital part of health and production management in sheep flocks and cattle herds in the UK, and good control is highly dependent on effective anthelmintics. Unfortunately, a direct and unavoidable consequence of using anthelmintics to control worm populations is selection for individuals that are resistant to the chemicals used. If left unchecked, anthelmintic resistance (AR) could prove to be one of the biggest challenges to sheep and cattle production and animal welfare within the UK. As a consequence of increasing reports of AR in sheep, a working group, "SCOPS" (sustainable control of parasites in sheep) was formed in 2003 with representatives from the UK sheep industry to promote practical guidelines for sheep farmers and their advisors. This led to the production of guidelines for 'sustainable worm control strategies for sheep' intended for veterinarians and sheep advisors, plus ongoing promotional literature aimed at farmers. Whilst there is some evidence of emerging resistance in roundworms of cattle, it appears to still be at a very low level in the UK. However the potential presence of such AR in cattle worms has been seen as a timely warning, which if ignored, could lead to a not dissimilar AR situation to that seen in sheep, and in other cattle areas around the world. Reports of AR in UK cattle nematodes have generally been limited to a small number of anecdotal reports of treatment failure with some macrocyclic lactone (ML) products, especially those formulated as pour-on preparations, and invariably involving the dose-limiting species, Cooperia oncophora. As a consequence of these observations, guidelines have been produced similar to those for sheep, for sustainable worm control strategies for cattle "COWS" (control of worms sustainably), and were launched in May 2010. Uptake and effectiveness of SCOPS recommendations are

Hybrid Epidemics - A Case Study on Computer Worm Conficker

OpenAIRE

Zhang, Changwang; Zhou, Shi; Chain, Benjamin M.

2014-01-01

Conficker is a computer worm that erupted on the Internet in 2008. It is unique in combining three different spreading strategies: local probing, neighbourhood probing, and global probing. We propose a mathematical model that combines three modes of spreading: local, neighbourhood, and global, to capture the worm's spreading behaviour. The parameters of the model are inferred directly from network data obtained during the first day of the Conficker epidemic. The model is then used to explore ...

Logistics of Guinea worm disease eradication in South Sudan.

Science.gov (United States)

Jones, Alexander H; Becknell, Steven; Withers, P Craig; Ruiz-Tiben, Ernesto; Hopkins, Donald R; Stobbelaar, David; Makoy, Samuel Yibi

2014-03-01

From 2006 to 2012, the South Sudan Guinea Worm Eradication Program reduced new Guinea worm disease (dracunculiasis) cases by over 90%, despite substantial programmatic challenges. Program logistics have played a key role in program achievements to date. The program uses disease surveillance and program performance data and integrated technical-logistical staffing to maintain flexible and effective logistical support for active community-based surveillance and intervention delivery in thousands of remote communities. Lessons learned from logistical design and management can resonate across similar complex surveillance and public health intervention delivery programs, such as mass drug administration for the control of neglected tropical diseases and other disease eradication programs. Logistical challenges in various public health scenarios and the pivotal contribution of logistics to Guinea worm case reductions in South Sudan underscore the need for additional inquiry into the role of logistics in public health programming in low-income countries.

Chemistry and the worm: Caenorhabditis elegans as a platform for integrating chemical and biological research.

Science.gov (United States)

Hulme, S Elizabeth; Whitesides, George M

2011-05-16

This Review discusses the potential usefulness of the worm Caenorhabditis elegans as a model organism for chemists interested in studying living systems. C. elegans, a 1 mm long roundworm, is a popular model organism in almost all areas of modern biology. The worm has several features that make it attractive for biology: it is small (1000 cells), transparent, and genetically tractable. Despite its simplicity, the worm exhibits complex phenotypes associated with multicellularity: the worm has differentiated cells and organs, it ages and has a well-defined lifespan, and it is capable of learning and remembering. This Review argues that the balance between simplicity and complexity in the worm will make it a useful tool in determining the relationship between molecular-scale phenomena and organism-level phenomena, such as aging, behavior, cognition, and disease. Following an introduction to worm biology, the Review provides examples of current research with C. elegans that is chemically relevant. It also describes tools-biological, chemical, and physical-that are available to researchers studying the worm. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The effect of chloroquine on the male worms of Onchocerca volvulus ...

African Journals Online (AJOL)

Chloroqunie is a well-known anti-malaria drug commonly used in the tropics. Chloroquine was in this study, tested on adult male worms of Onchocerca volvulus to assess its possible effect. Male worms were mechanically isolated from nodules of untreated onchocerciasis patients. After 24hours incubation in a drug-free ...

Hydrolytic Degradation of Poly (ethylene oxide)-block-Polycaprolactone Worm Micelles

OpenAIRE

Geng, Yan; Discher, Dennis E.

2005-01-01

Spherical micelles and nanoparticles made with degradable polymers have been of great interest for therapeutic application, but degradation induced changes in a spherical morphology can be subtle and mechanism/kinetics appears poorly understood. Here, we report the first preparation of giant and flexible worm micelles self-assembled from degradable copolymer poly (ethylene oxide)-block-polycaprolactone. Such worm micelles spontaneously shorten to generate spherical micelles, triggered by poly...

Guinea worm infection in northern Nigeria: reflections on a disease approaching eradication.

Science.gov (United States)

Greenwood, Brian; Greenwood, Alice; Bradley, Andrew

2017-05-01

Global eradication of the guinea worm (Dracunculus medinensis) is near, although perhaps delayed a little by the discovery of a transmission cycle in dogs. It is therefore an appropriate time to reflect on the severe impact of this infection on the life of the communities where it was endemic prior to the start of the global eradication programme in 1981. From 1971 to 1974, we conducted a series of unpublished studies on guinea worm in a group of villages in Katsina State, northern Nigeria, where the infection was highly endemic. These studies demonstrated the high rate of infection in affected communities, the frequent recurrence of the infection in some subjects and the long-standing disability that remained in some infected individuals. Immunological studies showed a high level of immediate hypersensitivity to adult worm and larval antigens but a downregulation of Th1-type T-cell responses to worm antigens. Freeing communities such as those described in this article from the scourge of guinea worm infection for good will be an important public health triumph. © 2017 The Authors. Tropical Medicine & International Health Published by John Wiley & Sons Ltd.

An Epidemic Model of Computer Worms with Time Delay and Variable Infection Rate

Directory of Open Access Journals (Sweden)

Yu Yao

2018-01-01

Full Text Available With rapid development of Internet, network security issues become increasingly serious. Temporary patches have been put on the infectious hosts, which may lose efficacy on occasions. This leads to a time delay when vaccinated hosts change to susceptible hosts. On the other hand, the worm infection is usually a nonlinear process. Considering the actual situation, a variable infection rate is introduced to describe the spread process of worms. According to above aspects, we propose a time-delayed worm propagation model with variable infection rate. Then the existence condition and the stability of the positive equilibrium are derived. Due to the existence of time delay, the worm propagation system may be unstable and out of control. Moreover, the threshold τ0 of Hopf bifurcation is obtained. The worm propagation system is stable if time delay is less than τ0. When time delay is over τ0, the system will be unstable. In addition, numerical experiments have been performed, which can match the conclusions we deduce. The numerical experiments also show that there exists a threshold in the parameter a, which implies that we should choose appropriate infection rate β(t to constrain worm prevalence. Finally, simulation experiments are carried out to prove the validity of our conclusions.

Sulfur contents and sulfur-isotope compositions of thiotrophic symbioses in bivalve molluscs and vestimentiferan worms

Science.gov (United States)

Vetter, R.D.; Fry, B.

1998-01-01

Total sulfur (S(TOT)), elemental sulfur (S??) and sulfur-isotope compositions (??34S) of marine animals were analyzed to determine whether these chemical characteristics could help distinguish animals with a sulfur-based, thiotrophic nutrition from animals whose nutrition is based on methanotrophy or on more normal consumption of phytoplankton-derived organic matter. The presence of S??was almost entirely confined to the symbiont-containing tissues of thiotrophs, but was sometimes undetectable in thiotrophic species where sulfide availability was probably low. When S??contents were subtracted, the remaining tissue-sulfur concentrations were similar for all nutritional groups. ??34S values were typically lower for thiotrophs than for other groups, although there was overlap in methanotroph and thiotroph values at some sites. Field evidence supported the existence of small to moderate (1 to 10???)34S fractionations in the uptake of sulfides and metabolism of thiosulfate. In general, a total sulfur content of >3% dry weight, the presence of elemental sulfur, and ??34S values less than + 5??? can be used to infer a thiotrophic mode of nutrition.

Hybrid epidemics--a case study on computer worm conficker.

Directory of Open Access Journals (Sweden)

Changwang Zhang

Full Text Available Conficker is a computer worm that erupted on the Internet in 2008. It is unique in combining three different spreading strategies: local probing, neighbourhood probing, and global probing. We propose a mathematical model that combines three modes of spreading: local, neighbourhood, and global, to capture the worm's spreading behaviour. The parameters of the model are inferred directly from network data obtained during the first day of the Conficker epidemic. The model is then used to explore the tradeoff between spreading modes in determining the worm's effectiveness. Our results show that the Conficker epidemic is an example of a critically hybrid epidemic, in which the different modes of spreading in isolation do not lead to successful epidemics. Such hybrid spreading strategies may be used beneficially to provide the most effective strategies for promulgating information across a large population. When used maliciously, however, they can present a dangerous challenge to current internet security protocols.

Hybrid epidemics--a case study on computer worm conficker.

Science.gov (United States)

Zhang, Changwang; Zhou, Shi; Chain, Benjamin M

2015-01-01

Conficker is a computer worm that erupted on the Internet in 2008. It is unique in combining three different spreading strategies: local probing, neighbourhood probing, and global probing. We propose a mathematical model that combines three modes of spreading: local, neighbourhood, and global, to capture the worm's spreading behaviour. The parameters of the model are inferred directly from network data obtained during the first day of the Conficker epidemic. The model is then used to explore the tradeoff between spreading modes in determining the worm's effectiveness. Our results show that the Conficker epidemic is an example of a critically hybrid epidemic, in which the different modes of spreading in isolation do not lead to successful epidemics. Such hybrid spreading strategies may be used beneficially to provide the most effective strategies for promulgating information across a large population. When used maliciously, however, they can present a dangerous challenge to current internet security protocols.

Worms in the College Classroom: More than Just a Composting Demonstration

Science.gov (United States)

Kelley, Rebecca L.

2010-01-01

Although worm bins have been used by K-12 and nonformal educators for decades, there is little evidence of their use in postsecondary education. The ease of use, maintenance, affordability, portability, and diversity of scientific concepts that can be demonstrated with a worm bin make it a valuable tool in college science classrooms. The purpose…

WormSizer: high-throughput analysis of nematode size and shape.

Directory of Open Access Journals (Sweden)

Brad T Moore

Full Text Available The fundamental phenotypes of growth rate, size and morphology are the result of complex interactions between genotype and environment. We developed a high-throughput software application, WormSizer, which computes size and shape of nematodes from brightfield images. Existing methods for estimating volume either coarsely model the nematode as a cylinder or assume the worm shape or opacity is invariant. Our estimate is more robust to changes in morphology or optical density as it only assumes radial symmetry. This open source software is written as a plugin for the well-known image-processing framework Fiji/ImageJ. It may therefore be extended easily. We evaluated the technical performance of this framework, and we used it to analyze growth and shape of several canonical Caenorhabditis elegans mutants in a developmental time series. We confirm quantitatively that a Dumpy (Dpy mutant is short and fat and that a Long (Lon mutant is long and thin. We show that daf-2 insulin-like receptor mutants are larger than wild-type upon hatching but grow slow, and WormSizer can distinguish dauer larvae from normal larvae. We also show that a Small (Sma mutant is actually smaller than wild-type at all stages of larval development. WormSizer works with Uncoordinated (Unc and Roller (Rol mutants as well, indicating that it can be used with mutants despite behavioral phenotypes. We used our complete data set to perform a power analysis, giving users a sense of how many images are needed to detect different effect sizes. Our analysis confirms and extends on existing phenotypic characterization of well-characterized mutants, demonstrating the utility and robustness of WormSizer.

Plutonium isotope ratios in polychaete worms

International Nuclear Information System (INIS)

Beasley, T.M.; Fowler, S.W.

1976-01-01

Reference is made to recent reports that suggest that terrestrial and aquatic organisms may preferentially take up 238 Pu compared with sup(239+240)Pu. It is stated that although kinetic isotope effects are known to occur in biological systems for low mass number elements, such as H, C and N, such effects are generally discounted with higher mass numbers, and differences in the biological 'uptake' of isotopes of high mass number elements, such as those of Pu, are normally attributable to differences in the chemical or physical forms of the isotopes or to different quantities of isotopes available to organisms. This has been applied to explain differential Pu isotope behaviour in animals under controlled laboratory conditions, but it is not certain that it can be applied to explain anomalies of Pu isotope behaviour in organisms contaminated by nuclear test debris or by wastes from nuclear fuel reprocessing plants. Geochemical weathering may also have an effect. Described here are experiments in which it was found that deposit feeding marine worms living in sediments contaminated in different ways with Pu isotopes did not show preferential accumulation of 238 Pu. The worms had been exposed to different chemical and physical forms of the isotopes, including exposure to laboratory-labelled sediment, sediment collected from a former weapons test site, and sediment contaminated by wastes from a nuclear fuel reprocessing plant. The worms were allowed to accumulate Pu for times of 5 to 40 days. Isotope ratios were determined by α-spectrometric techniques. It is considered that the results are important for environmental samples where Pu activity levels are low. (U.K.)

Aquatic worm reactor for improved sludge processing and resource recovery

OpenAIRE

Hendrickx, T.L.G.

2009-01-01

Municipal waste water treatment is mainly achieved by biological processes. These processes produce huge volumes of waste sludge (up 1.5 million m3/year in the Netherlands). Further processing of the waste sludge involves transportation, thickening and incineration. A decrease in the amount of waste sludge would be both environmentally and economically attractive. Aquatic worms can be used to reduce the amount of waste sludge. After predation by the worms, the amount of final sludge is lower....

Distribution, abundance and trail characteristics of acorn worms at Australian continental margins

Science.gov (United States)

Anderson, T. J.; Przeslawski, R.; Tran, M.

2011-04-01

Acorn worms (Enteropneusta), which were previously thought to be a missing link in understanding the evolution of chordates, are an unusual and potentially important component of many deep-sea benthic environments, particularly for nutrient cycling. Very little is known about their distribution, abundance, or behaviour in deep-sea environments around the world, and almost nothing is known about their distribution within Australian waters. In this study, we take advantage of two large-scale deep-sea mapping surveys along the eastern (northern Lord Howe Rise) and western continental margins of Australia to quantify the distribution, abundance and trail-forming behaviour of this highly unusual taxon. This is the first study to quantify the abundance and trail behaviour of acorn worms within Australian waters and provides the first evidence of strong depth-related distributions. Acorn worm densities and trail activity were concentrated between transect-averaged depths of 1600 and 3000 m in both eastern and western continental margins. The shallow limit of their depth distribution was 1600 m. The deeper limit was less well-defined, as individuals were found in small numbers below 3000 down to 4225 m. This distributional pattern may reflect a preference for these depths, possibly due to higher availability of nutrients, rather than a physiological constraint to greater depths. Sediment characteristics alone were poor predictors of acorn worm densities and trail activity. High densities of acorn worms and trails were associated with sandy-mud sediments, but similar sediment characteristics in either shallower or deeper areas did not support similar densities of acorn worms or trails. Trail shapes varied between eastern and western margins, with proportionally more meandering trails recorded in the east, while spiral and meandering trails were both common in the west. Trail shape varied by depth, with spiral-shaped trails dominant in areas of high acorn worm densities

Worms Eat My Garbage. How To Set Up and Maintain a Worm Composting System. First Edition.

Science.gov (United States)

Appelhof, Mary

This book is a resource for parents and teachers who want to teach about recycling and composting by setting up and maintaining a worm composting system. It is designed to be a detailed yet simple manual of vermicomposting. The manual covers the basics of vermicomposting and answers such questions as where to store a composting container, what…

WormGender - Open-Source Software for Automatic Caenorhabditis elegans Sex Ratio Measurement.

Directory of Open Access Journals (Sweden)

Marta K Labocha

Full Text Available Fast and quantitative analysis of animal phenotypes is one of the major challenges of current biology. Here we report the WormGender open-source software, which is designed for accurate quantification of sex ratio in Caenorhabditis elegans. The software functions include, i automatic recognition and counting of adult hermaphrodites and males, ii a manual inspection feature that enables manual correction of errors, and iii flexibility to use new training images to optimize the software for different imaging conditions. We evaluated the performance of our software by comparing manual and automated assessment of sex ratio. Our data showed that the WormGender software provided overall accurate sex ratio measurements. We further demonstrated the usage of WormGender by quantifying the high incidence of male (him phenotype in 27 mutant strains. Mutants of nine genes (brc-1, C30G12.6, cep-1, coh-3, him-3, him-5, him-8, skr-1, unc-86 showed significant him phenotype. The WormGender is written in Java and can be installed and run on both Windows and Mac platforms. The source code is freely available together with a user manual and sample data at http://www.QuantWorm.org/. The source code and sample data are also available at http://dx.doi.org/10.6084/m9.figshare.1541248.

Comparison of sup(115m)Cd accumulation from sediments and sea water by polychaete worms

International Nuclear Information System (INIS)

Ueda, Taishi; Nakamura, Ryoichi; Suzuki, Yuzuru

1976-01-01

To know the role played by marine sediments in influencing the fate of discharged metals, (1) the interaction of metals between sediments and deposit-feeder marine worms (Nereis japonica), and (2) uptake and excretion of metals by worms were examined by laboratory experiments using sup(115m)Cd. Worms directly in contact with sup(115m)Cd-sediments accumulated sup(115m)Cd six times more than worms that were not in contact with the sup(115m)Cd sediments during the 8 days of experimentation and 12% of sup(115m)Cd in sediments were noted to be transfered to worms per unit. Comparing the concentration factor of 22 (from sea water) with accumulation from sediments, it was assumed that sup(115m)Cd in sediments would give the effect of 1/200 to the accumulation of sup(115m)Cd by worms in sea water to the accumulation of sup(115m)Cd. Further, to simulate these results close to that occuring in the natural ecosystem, the distribution of sup(115m)Cd in sea water, sediments and alga were also examined by means of a curve analysis of the distribution pattern by a three compartment model. It proved that the activity ratios of sup(115m)Cd were 9 for sediments and 21 for alga, which was similar to 22 for worms. (auth.)

Hydrolytic degradation of poly(ethylene oxide)-block-polycaprolactone worm micelles.

Science.gov (United States)

Geng, Yan; Discher, Dennis E

2005-09-21

Spherical micelles and nanoparticles made with degradable polymers have been of great interest for therapeutic application, but degradation-induced changes in a spherical morphology can be subtle and mechanism/kinetics appears poorly understood. Here, we report the first preparation of giant and flexible worm micelles self-assembled from degradable copolymer poly(ethylene oxide)-block-polycaprolactone. Such worm micelles spontaneously shorten to generate spherical micelles, triggered by polycaprolactone hydrolysis, with distinct mechanism and kinetics from that which occurs in bulk material.

Propagation Modeling and Defending of a Mobile Sensor Worm in Wireless Sensor and Actuator Networks.

Science.gov (United States)

Wang, Tian; Wu, Qun; Wen, Sheng; Cai, Yiqiao; Tian, Hui; Chen, Yonghong; Wang, Baowei

2017-01-13

WSANs (Wireless Sensor and Actuator Networks) are derived from traditional wireless sensor networks by introducing mobile actuator elements. Previous studies indicated that mobile actuators can improve network performance in terms of data collection, energy supplementation, etc. However, according to our experimental simulations, the actuator's mobility also causes the sensor worm to spread faster if an attacker launches worm attacks on an actuator and compromises it successfully. Traditional worm propagation models and defense strategies did not consider the diffusion with a mobile worm carrier. To address this new problem, we first propose a microscopic mathematical model to describe the propagation dynamics of the sensor worm. Then, a two-step local defending strategy (LDS) with a mobile patcher (a mobile element which can distribute patches) is designed to recover the network. In LDS, all recovering operations are only taken in a restricted region to minimize the cost. Extensive experimental results demonstrate that our model estimations are rather accurate and consistent with the actual spreading scenario of the mobile sensor worm. Moreover, on average, the LDS outperforms other algorithms by approximately 50% in terms of the cost.

Cuticular surface damage of Ascaridia galli adult worms treated with Veitchia merrillii betel nuts extract in vitro.

Science.gov (United States)

Balqis, Ummu; Hambal, Muhammad; Rinidar; Athaillah, Farida; Ismail; Azhar; Vanda, Henni; Darmawi

2017-07-01

The objective of this research was to in vitro evaluate the cuticular surface damage of Ascaridia galli adult worms treated with ethanolic extract of betel nuts Veitchia merrillii . Phytochemical screening was done using FeCl 3 , Wagner and Dragendorff reagents, NaOH, MgHCl, and Liebermann-Burchard reaction test. Amount of 16 worms were segregated into four groups with three replicates. Four worms of each group submerged into phosphate buffered saline, 25 mg/ml, and 75 mg/ml crude ethanolic extract of V. merrillii , and 15 mg/ml albendazole. The effect of these extract was observed 40 h after incubation as soon as worms death. The worms were sectioned transversally and were explored for any cuticular histopathological changes in their body surface under microscope. We found that the ethanolic extract of V. merrillii betel nuts contains tannins, alkaloids, flavonoids, triterpenoids, and saponins. The ethanolic extract of betel nuts V. merrillii induces surface alterations caused cuticular damage of A. galli adult worms. We concluded that ethanolic extract of betel nuts V. merrillii possess anthelmintic activity caused cuticular damage of A. galli adult worms.

WormBase 2016: expanding to enable helminth genomic research.

Science.gov (United States)

Howe, Kevin L; Bolt, Bruce J; Cain, Scott; Chan, Juancarlos; Chen, Wen J; Davis, Paul; Done, James; Down, Thomas; Gao, Sibyl; Grove, Christian; Harris, Todd W; Kishore, Ranjana; Lee, Raymond; Lomax, Jane; Li, Yuling; Muller, Hans-Michael; Nakamura, Cecilia; Nuin, Paulo; Paulini, Michael; Raciti, Daniela; Schindelman, Gary; Stanley, Eleanor; Tuli, Mary Ann; Van Auken, Kimberly; Wang, Daniel; Wang, Xiaodong; Williams, Gary; Wright, Adam; Yook, Karen; Berriman, Matthew; Kersey, Paul; Schedl, Tim; Stein, Lincoln; Sternberg, Paul W

2016-01-04

WormBase (www.wormbase.org) is a central repository for research data on the biology, genetics and genomics of Caenorhabditis elegans and other nematodes. The project has evolved from its original remit to collect and integrate all data for a single species, and now extends to numerous nematodes, ranging from evolutionary comparators of C. elegans to parasitic species that threaten plant, animal and human health. Research activity using C. elegans as a model system is as vibrant as ever, and we have created new tools for community curation in response to the ever-increasing volume and complexity of data. To better allow users to navigate their way through these data, we have made a number of improvements to our main website, including new tools for browsing genomic features and ontology annotations. Finally, we have developed a new portal for parasitic worm genomes. WormBase ParaSite (parasite.wormbase.org) contains all publicly available nematode and platyhelminth annotated genome sequences, and is designed specifically to support helminth genomic research. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

Operation of an aquatic worm reactor suitable for sludge reduction at large scale

NARCIS (Netherlands)

Hendrickx, T.L.G.; Elissen, H.J.H.; Temmink, B.G.; Buisman, C.J.N.

2011-01-01

Treatment of domestic waste water results in the production of waste sludge, which requires costly further processing. A biological method to reduce the amount of waste sludge and its volume is treatment in an aquatic worm reactor. The potential of such a worm reactor with the oligochaete

Structure and flexibility of worm-like micelles

DEFF Research Database (Denmark)

Jerke, G.; Pedersen, J.S.; Egelhaaf, S.U.

1997-01-01

Small-angle neutron scattering and static light scattering experiments have been performed on worm-like micelles formed by soybean lecithin and trace amounts of water in deuterated iso-octane. The structure and flexibility of the aggregates have been investigated as a function of solution...

Spatial and temporal differences in giant kidney worm, dictophyma renale, prevalence in Minnesota Mink, Mustela vison

Science.gov (United States)

Mech, L.D.

2008-01-01

Examination of 110 Mink (Mustela vison) carcasses from 1998 through 2007 indicated that the giant kidney worm, Dioctophyma renale, occurred in Pine and Kanabec Counties of eastern Minnesota with annual prevalences of 0-92%. Worm prevalence increased from 20% in 1999 to 92% in 2001 and decreased to 6% in 2005. During 2000 to 2007, no worms were found in Mink from Anoka and Chisago Counties (n = 54), and in 2000, none in 107 Mink from LeSeur, Freeborn, Redwood, Brown and Watonwan Counties. Changes in kidney worm prevalence were positively related to trapping success, considered an index of Mink density.

The provision of potable water in eradication of Guinea worm infection in Ezza North, Southeastern, Nigeria.

Science.gov (United States)

Ede, Alison Okorie; Nwaokoro, Joakin Chidozie; Iwuala, C C; Amadi, A N; Akpelu, Ugochinyere Alvana

2014-10-01

Guinea worm is a parasite found in unprotected drinking water sources, causes considerable morbidity and loss of agricultural production among rural people. The study was to determine the current status of Guinea worm infection in Ezza North and to evaluate the impact of control measures on guinea worm infection. A total of 200 individuals in Ezza North Southeastern, Nigeria were examined for guinea worm infection. A standardized questionnaire was used to determine the effect of potable water on guinea worm eradication/control, the source of drinking water, information on the knowledge, attitude, symptom management practices, availability of health facilities and boreholes installation status. The instrument for data collection was well constructed, validated and reliable tested questionnaire by an expert. Data obtained was analyzed using Epi-Info model 3.4 versions. Results of a study indicated majority of the respondents 195 (97.5 %) have access to safe drinking water supply which indicated no case of Guinea worm infection. The active use of potable water supply was found among the age group of 20-30 years 71 (35.5 %) and higher in male (57.5 %) than females (42.5 %). The drastic reduction of Guinea worm infection to zero (0) level in Ezza North were due to multiple factors as health education, availability of functional boreholes, presence of health centers for immediate treatment if any case discovered.

Worm grunting, fiddling, and charming--humans unknowingly mimic a predator to harvest bait.

Directory of Open Access Journals (Sweden)

Kenneth C Catania

Full Text Available BACKGROUND: For generations many families in and around Florida's Apalachicola National Forest have supported themselves by collecting the large endemic earthworms (Diplocardia mississippiensis. This is accomplished by vibrating a wooden stake driven into the soil, a practice called "worm grunting". In response to the vibrations, worms emerge to the surface where thousands can be gathered in a few hours. Why do these earthworms suddenly exit their burrows in response to vibrations, exposing themselves to predation? PRINCIPAL FINDINGS: Here it is shown that a population of eastern American moles (Scalopus aquaticus inhabits the area where worms are collected and that earthworms have a pronounced escape response from moles consisting of rapidly exiting their burrows to flee across the soil surface. Recordings of vibrations generated by bait collectors and moles suggest that "worm grunters" unknowingly mimic digging moles. An alternative possibility, that worms interpret vibrations as rain and surface to avoid drowning is not supported. CONCLUSIONS: Previous investigations have revealed that both wood turtles and herring gulls vibrate the ground to elicit earthworm escapes, indicating that a range of predators may exploit the predator-prey relationship between earthworms and moles. In addition to revealing a novel escape response that may be widespread among soil fauna, the results show that humans have played the role of "rare predators" in exploiting the consequences of a sensory arms race.

Sago worms as a nutritious traditional and alternative food for rural children in Southeast Sulawesi, Indonesia.

Science.gov (United States)

Nirmala, Intan R; Trees; Suwarni; Pramono, Mochammad S

2017-06-01

The sago worm Rhynchophorus ferrugineus is a nutritious food source found in the remaining parts of a sago palm trunk after the removal of sago starch by farmers. The effort to increase sago worm consumption is investigated in an intervention study among children aged eating a usual diet, but without sago worms (n=13). Snacks were served once per day (100 g) for 45 days and designed to contain similar amounts of vegetables (carrots and long beans) and other ingredients including rice, sticky rice, cassava, sweet potato, banana, or tofu with or without sago worms. Food preference was ascertained by interview. Anthropometric measurements were taken at baseline and the endpoint. After mixing all food stuffs into one product for instance nasi gurih, protein and fat content in the intervention group was higher compared to control group (8.8 g and 7.3 g vs 4.7 g and 0.5 g respectively). In the intervention group receiving complementary feeding with sago worms, children's height changed minimally as did the control group (0.3 vs 0.2 cm); no difference was observed between the groups regarding weight or height. Sago worm consumption can diversify the diet through usage in various dishes, so improving its overall nutritional quality. Worm addition in an intervention program does not compromise, but maintains nutritional value. Local use adds affordability and sustainability to the food and health systems in a sago-consuming culture, so contributing to food security.

Hi shells, supershells, shell-like objects, and ''worms''

International Nuclear Information System (INIS)

Heiles, C.

1984-01-01

We present photographic representations of the combination of two Hi surveys, so as to eliminate the survey boundaries at Vertical BarbVertical Bar = 10 0 . We also present high-contrast photographs for particular velocities to exhibit weak Hi features. All of these photographs were used to prepare a new list of Hi shells, supershells, and shell-like objects. We discuss the structure of three shell-like objects that are associated with high-velocity gas, and with gas at all velocities that is associated with radio continuum loops I, II, and III. We use spatial filtering to find wiggly gas filaments: ''worms'': crawling away from the galactic plane in the inner Galaxy. The ''worms'' are probably parts of shells that are open at the top; such shells should be good sources of hot gas for the galactic halo

In vitro effects of amodiaquine on paired Schistosoma mansoni adult worms at concentrations of less than 5 µg/mL

Directory of Open Access Journals (Sweden)

Kentaro Kato

2013-04-01

Full Text Available In this study, the in vitro effects of amodiaquine (AQ monotherapy on the egg output of paired adult Schistosoma mansoni worms and their survival during in vitro culture were assessed. In addition, the gross morphological alterations of male and female worms caused by AQ were visually observed under a dissecting microscope. AQ significantly reduced the daily egg output of paired adult S. mansoni worms following incubation for 14 days at 1-5 µg/mL, but not at 0.5 µg/mL, compared with the control group. AQ also reduced the survival of male and female worms at concentrations of 2 and 5 µg/mL, respectively. Moreover, exposure to 5 µg/mL AQ caused severe swelling and/or localisation of black content in the body of all male and female worms within one or two days of incubation; subsequently, shrinkage in the male worms and elongation in the female worms were observed. The initial morphological alterations caused by AQ occurred along the intestinal tract of the male and female worms. To our knowledge, this is the first study to report not only the efficacy of AQ at concentrations lower than 5 µg/mL on paired adult S. mansoni worms, but also the effects of AQ on the intestinal tracts of worms in in vitro culture.

Evaluation of existing EPRI and INEL test data to determine the worm to worm gear coefficient of friction in Limitorque actuators

Energy Technology Data Exchange (ETDEWEB)

Garza, I.A.

1996-12-01

About the last sizing parameter for motor operated valves which has not been determined by utility or NRC sponsored testing is actuator efficiency. A by-product of EPRI testing for valve factors is the measurement of the actuator efficiencies. Motor sizing in this testing provides efficiency testing for motors running near synchronous speed. INEL testing, sponsored by the NRC, for stem factors and rate of loading provides complimentary data for motors loaded down to zero speed. This paper analyzes the data from these two test programs to determine the coefficient of friction for the worm to worm gear interface. This allowed the development of an algorithm for determining the efficiency of actuators which have not been tested. This paper compares the results of this algorithm to the test data to provide a measure of the accuracy of this method for calculating actuator efficiency.

Evaluation of existing EPRI and INEL test data to determine the worm to worm gear coefficient of friction in Limitorque actuators

International Nuclear Information System (INIS)

Garza, I.A.

1996-01-01

About the last sizing parameter for motor operated valves which has not been determined by utility or NRC sponsored testing is actuator efficiency. A by-product of EPRI testing for valve factors is the measurement of the actuator efficiencies. Motor sizing in this testing provides efficiency testing for motors running near synchronous speed. INEL testing, sponsored by the NRC, for stem factors and rate of loading provides complimentary data for motors loaded down to zero speed. This paper analyzes the data from these two test programs to determine the coefficient of friction for the worm to worm gear interface. This allowed the development of an algorithm for determining the efficiency of actuators which have not been tested. This paper compares the results of this algorithm to the test data to provide a measure of the accuracy of this method for calculating actuator efficiency

Histamine 1 Receptor Blockade Enhances Eosinophil-Mediated Clearance of Adult Filarial Worms.

Directory of Open Access Journals (Sweden)

Ellen Mueller Fox

Full Text Available Filariae are tissue-invasive nematodes that cause diseases such as elephantiasis and river blindness. The goal of this study was to characterize the role of histamine during Litomosoides sigmodontis infection of BALB/c mice, a murine model of filariasis. Time course studies demonstrated that while expression of histidine decarboxylase mRNA increases throughout 12 weeks of infection, serum levels of histamine exhibit two peaks-one 30 minutes after primary infection and one 8 weeks later. Interestingly, mice treated with fexofenadine, a histamine receptor 1 inhibitor, demonstrated significantly reduced worm burden in infected mice compared to untreated infected controls. Although fexofenadine-treated mice had decreased antigen-specific IgE levels as well as lower splenocyte IL-5 and IFNγ production, they exhibited a greater than fourfold rise in eosinophil numbers at the tissue site where adult L. sigmodontis worms reside. Fexofenadine-mediated clearance of L. sigmodontis worms was dependent on host eosinophils, as fexofenadine did not decrease worm burdens in eosinophil-deficient dblGATA mice. These findings suggest that histamine release induced by tissue invasive helminths may aid parasite survival by diminishing eosinophilic responses. Further, these results raise the possibility that combining H1 receptor inhibitors with current anthelmintics may improve treatment efficacy for filariae and other tissue-invasive helminths.

Ectopic Human Fasciola hepatica Infection by an Adult Worm in the Mesocolon.

Science.gov (United States)

Kim, Ah Jin; Choi, Chang Hwan; Choi, Sun Keun; Shin, Yong Woon; Park, Yun-Kyu; Kim, Lucia; Choi, Suk Jin; Han, Jee Young; Kim, Joon Mee; Chu, Young Chae; Park, In Suh

2015-12-01

We report here an ectopic case of Fasciola hepatica infection confirmed by recovery of an adult worm in the mesocolon. A 56-year-old female was admitted to our hospital with discomfort and pain in the left lower quadrant of the abdomen. Abdominal CT showed 3 abscesses in the left upper quadrant, mesentery, and pelvic cavity. On surgical exploration, abscess pockets were found in the mesocolon of the sigmoid colon and transverse colon. A leaf-like worm found in the abscess pocket of the mesocolon of the left colon was diagnosed as an adult fluke of F. hepatica. Histologically, numerous eggs of F. hepatica were noted with acute and chronic granulomatous inflammations in the subserosa and pericolic adipose tissues. Conclusively, a rare case of ectopic fascioliasis has been confirmed in this study by the adult worm recovery of F. hepatica in the mesocolon.

Evaluation of integrated sludge worm and catfish farming with biofloc system

Directory of Open Access Journals (Sweden)

Dedi Pardiansyah

2015-05-01

Full Text Available ABSTRACTCurrently, supply of sludge worm (Tubifex sp. merely came from wild, so that it could not meet demand for fish hatchery. Additionally, harvest from the wild did not have a quality assurance, due to the possibility of sludge worm becoming an agent of disease. This study was conducted to evaluate the production of sludge worm culture by utilizing catfish culture waste (Clarias sp. in bioflok system. In this system, water from catfish culture media flowed into sludge worm culture media using recirculation systems. This study used a completely randomized design with four treatments and two replications, in which treatment A (addition of catfish culture waste from intensive system, treatment B (addition of catfish culture waste from biofloc system, treatment C (the addition of fermented chicken manure at the beginning of experiment as negative control, and treatment D (addition of fermented chicken manure at the beginning of experiment and then every five days as positive control. The results showed that the highest production was obtained by treatment B at biomass growth of 0.97 kg/m2 and sludge worm density of 388.000 individu/m2. Keywords: sludge worm, biofloc, chicken manure, catfish, catfish culture waste  ABSTRAK Saat ini pasokan cacing sutra (Tubifex sp. hanya berasal dari alam, sehingga belum mencukupi permintaan untuk kegiatan pembenihan ikan. Selain itu, hasil tangkapan dari alam tidak memiliki jaminan kualitas, karena cacing sutra dapat menjadi agen penyakit. Penelitian ini dilakukan untuk mengevaluasi hasil produksi budidaya cacing sutra dengan memanfaatkan limbah budidaya ikan lele (Clarias sp. sistem bioflok. Pada sistem ini, air dari media budidaya ikan lele dialirkan ke media pemeliharaan cacing sutra menggunakan sistem resirkulasi. Penelitian ini menggunakan rancangan acak lengkap dengan empat perlakuan dan dua ulangan, yaitu perlakuan A (pemberian limbah ikan lele sistem intensif, perlakuan B (pemberian limbah ikan lele

Worm gearing for valve automation; Schneckengetriebe fuer die Armaturenautomatisierung

Energy Technology Data Exchange (ETDEWEB)

Herbstritt, Michael [AUMA Riester GmbH und Co. KG, Muellheim (Germany)

2010-11-15

Part-turn gearboxes are indispensable for exertion of the torques necessary for large part-turn valves. Torque demand has increased in the past decade, as a result, for example, of the use of pipelines of ever greater diameters in large conurbations, and of the operation of such pipelines at ever higher pressures. The design principle of a worm gear is useful in this context. Worm gearing systems with initial torques of up to 675,000 Nm are now available. The design of gearing systems capable of handling forces of this magnitude necessitates great know-how and experience. The very maximum of reliability is a basic requirement for actuator systems for applications involving such dimensions, since a failure may have catastrophic consequences. (orig.)

Perceptions of a literate community regarding causation, presentation and treatment practices of intestinal worms among children

International Nuclear Information System (INIS)

Mubeen, S.M.; Subhani, A.; Hassan, S.S.

2007-01-01

To find out the perceived common causes of intestinal worms, their presentations and treatment options taken by the respondents, among children. A total of 2000 families responded to a self-administered questionnaire that was designed to obtain the study objectives. A single adult individual from each family was asked to respond to the questionnaire. Families having health care workers or health professionals were excluded. Medical students were properly trained to ensure competence in collecting a reliable data. The majority of the total respondents were females (66.3%) and were between 15-25 years of age (mean age = 25.4 years) with 100% literacy rate. A noticeable number of respondents (31%) revealed that overeating of sugar causes intestinal worms and that they mainly presented as altered eating habits / appetite (51.8%), abdominal pain (40.8%) and generalized weakness (26.3%). Regarding perceptions of drug treatment, nearly 2/3 of the respondents felt that the de-worming agent should be given to suspected child only (p < 0.001), whereas 65% of the participants expected to observe worms after de-worming treatment (p < 0.001). Contrary to the common use of self-medication in most other illnesses, self-treatment of worms on suspicion was declared by only 21.5% of the respondents (p < 0.0001). This study confirms that misconceptions about intestinal worms in children were prevalent within the community. In addition to the issue of environmental sanitation, removal of the mistaken beliefs is a prerequisite for an effective and long-lasting parasitic control among children. (author)

Repeated inoculations with the lung and heartworm nematode Angiostrongylus vasorum result in increasing larval excretion and worm burden in the red fox (Vulpes vulpes

Directory of Open Access Journals (Sweden)

Ian David Woolsey

2017-12-01

Full Text Available The French heartworm Angiostongylus vasorum is found in European red fox (Vulpes vulpes and dog populations, where it appears to be spreading geographically. Once introduced into new areas, it establishes in local fox populations, typically to over 50% prevalence in a few years. High susceptibility and constant excretion of first stage larvae (L1 by the definitive hosts are prerequisites for sustaining high parasite biomass in a particular habitat. The present study explores the hypothesis that repeated ingestion of gastropods in nature will result in accumulation of adult worms and elevated excretion of L1 in feces. Experimentally infected foxes were subsequently inoculated via stomach tube once (9 weeks post initial inoculation or twice (9 and 13 weeks post inoculation (wpi with 100 third stage A. vasorum larvae (L3 previously isolated from aquatic snails infected with L1 from a naturally infected dog. Despite large variation in fecal larval excretion for the individual animals within the groups, excretion of L1 was significantly higher in foxes twice inoculated as compared to foxes inoculated only once. With an outlier in the once inoculated group removed, excretion became significantly higher in the three times inoculated group. Establishment of adult worms varied and only a trend to higher worm burdens was found in the group of foxes inoculated three times. However, this became significant with the same single outlier removed. Overall, it appears that protective immunity to A. vasorum does not appear to occur in V. vulpes with animals exhibiting high infection intensities without obvious clinical signs. The increasing larval excretion in foxes being repeatedly exposed to A. vasorum L3 support the hypothesis that foxes under natural conditions may repeatedly ingest infected gastropods and remain a source of environmental contamination for several months, potentially contributing to the establishment of endemic foci through increasing L1

Is Host-Based Anomaly Detection + Temporal Correlation = Worm Causality

National Research Council Canada - National Science Library

Sekar, Vyas; Xie, Yinglian; Reiter, Michael K; Zhang, Hui

2007-01-01

Epidemic-spreading attacks (e.g., worm and botnet propagation) have a natural notion of attack causality - a single network flow causes a victim host to get infected and subsequently spread the attack...

Durability Characteristics Analysis of Plastic Worm Wheel with Glass Fiber Reinforced Polyamide

OpenAIRE

Kim, Gun-Hee; Lee, Jeong-Won; Seo, Tae-Il

2013-01-01

Plastic worm wheel is widely used in the vehicle manufacturing field because it is favorable for weight lightening, vibration and noise reduction, as well as corrosion resistance. However, it is very difficult for general plastics to secure the mechanical properties that are required for vehicle gears. If the plastic resin is reinforced by glass fiber in the fabrication process of plastic worm wheel, it is possible to achieve the mechanical properties of metallic material levels. In this stud...

END THE OF HORROR WORM: Dracunculus medinensis.

African Journals Online (AJOL)

Dracunculus medinensis is a nematode that causes dracunculiasis. It is also known as the guinea worm disease and is caused by the large female nematode which is the longest nematode infecting humans. The adult female is longer than the male and can grow up to about 1m in length inside the body of the human host.

Life cycle of the oriental compost worm Perionyx excavatus ...

African Journals Online (AJOL)

1989-03-21

Mar 21, 1989 ... O. Graff of Braunschweig, West Germany, from worms originally obtained .... provides for an alternate life history strategy in Perionyx excavatus. ... illustrated. .... (1984), (eds) Edwards, C.A. & Lofty, J.R. Cambridge,. England.

Influence of the enchytraeid worm Buchholzia appendiculata on aggregate formation and organic matter decomposition.

NARCIS (Netherlands)

Marinissen, J.C.Y.; Didden, W.A.M.

1997-01-01

Enchytraeid worms were kept in <0.3 mm sieved sandy loam subsoil mixed with ground wheat, for 6 weeks at 16°C. Sieved soil with organic matter but without worms was also incubated. The soil was then allowed to air-dry slowly during 6 weeks. Enchytraeid casts were collected from the surface of the

Pyrosequencing of prey DNA in reptile faeces: analysis of earthworm consumption by slow worms.

Science.gov (United States)

Brown, David S; Jarman, Simon N; Symondson, William O C

2012-03-01

Little quantitative ecological information exists on the diets of most invertebrate feeding reptiles, particularly nocturnal or elusive species that are difficult to observe. In the UK and elsewhere, reptiles are legally required to be relocated before land development can proceed, but without knowledge of their dietary requirements, the suitability of receptor sites cannot be known. Here, we tested the ability of non-invasive DNA-based molecular diagnostics (454 pyrosequencing) to analyse reptile diets, with the specific aims of determining which earthworm species are exploited by slow worms (the legless lizard Anguis fragilis) and whether they feed on the deeper-living earthworm species that only come to the surface at night. Slow worm faecal samples from four different habitats were analysed using earthworm-specific PCR primers. We found that 86% of slow worms (N=80) had eaten earthworms. In lowland heath and marshy/acid grassland, Lumbricus rubellus, a surface-dwelling epigeic species, dominated slow worm diet. In two other habitats, riverside pasture and calciferous coarse grassland, diet was dominated by deeper-living anecic and endogeic species. We conclude that all species of earthworm are exploited by these reptiles and lack of specialization allows slow worms to thrive in a wide variety of habitats. Pyrosequencing of prey DNA in faeces showed promise as a practical, rapid and relatively inexpensive means of obtaining detailed and valuable ecological information on the diets of reptiles. © 2011 Blackwell Publishing Ltd.

Environmental and genetic factors affecting faecal worm egg counts ...

African Journals Online (AJOL)

Environmental and genetic factors affecting faecal worm egg counts in Merinos divergently selected for reproduction. ... The fixed effect of birth year x sex interaction was significant, with rams showing higher mean values for FWEC than ewes ...

Treatment of Schistosoma mansoni with miltefosine in vitro enhances serological recognition of defined worm surface antigens.

Directory of Open Access Journals (Sweden)

Marwa H El-Faham

2017-08-01

Full Text Available Miltefosine, an anti-cancer drug that has been successfully repositioned for treatment of Leishmania infections, has recently also shown promising effects against Schistosoma spp targeting all life cycle stages of the parasite. The current study examined the effect of treating Schistosoma mansoni adult worms with miltefosine on exposure of worm surface antigens in vitro.In an indirect immunofluorescence assay, rabbit anti-S.mansoni adult worm homogenate and anti-S. mansoni infection antisera gave strong immunofluorescence of the S. mansoni adult worm surface after treatment with miltefosine, the latter antiserum having previously been shown to synergistically enhance the schistosomicidal activity of praziquantel. Rabbit antibodies that recognised surface antigens exposed on miltefosine-treated worms were recovered by elution off the worm surface in low pH buffer and were used in a western immunoblotting assay to identify antigenic targets in a homogenate extract of adult worms (SmWH. Four proteins reacting with the antibodies in immunoblots were purified and proteomic analysis (MS/MS combined with specific immunoblotting indicated they were the S. mansoni proteins: fructose-1,6 bisphosphate aldolase (SmFBPA, Sm22.6, alkaline phosphatase and malate dehydrogenase. These antibodies were also found to bind to the surface of 3-hour schistosomula and induce immune agglutination of the parasites, suggesting they may have a role in immune protection.This study reveals a novel mode of action of miltefosine as an anti-schistosome agent. The immune-dependent hypothesis we investigated has previously been lent credence with praziquantel (PZQ, whereby treatment unmasks parasite surface antigens not normally exposed to the host during infection. Antigens involved in this molecular mechanism could have potential as intervention targets and antibodies against these antigens may act to increase the drug's anti-parasite efficacy and be involved in the development

Worms Expelled With the Urine From a Bosniak Cyst III of the Left Kidney.

Science.gov (United States)

Yang, Jie; Li, Pu; Su, Chuan; Zhang, Jia-Yi; Gu, Min

2016-07-01

An old fishman presented with left lumbago and finding worms in his urine. Type-B ultrasonic inspection and computed tomography scan found a Bosniak cyst III, containing several wire-like elements, in the middle of the left kidney. Expelled worms were confirmed to be Dioctophyma renale. After two courses of albendazole, the man was cured. Copyright © 2016 Elsevier Inc. All rights reserved.

Prevalence Of Intestinal Worm Infections Among Primary School ...

African Journals Online (AJOL)

Methods: A cross-sectional descriptive study was used to determine the status of intestinal worm infections whose subjects were drawn from eight city administrative divisions. Proportional random sampling method to select forty five (45) schools out of 320 public, private and non-formal schools was used. Using the school ...

Prevalence And Disabilities Caused By Guinea-Worm Disease ...

African Journals Online (AJOL)

A survey was carried out in 2001 to ascertain the status of Guinea worm disease infection among farm households in Ebonyi Local Government Area (LGA) of Ebonyi State. A total of 3,777 respondents were randomly sampled from 15 communities that comprised the LGA. The sample respondents were clinically examined ...

TORQUE MEASUREMENT IN WORM AGLOMERATION MACHINE

Directory of Open Access Journals (Sweden)

Marian DUDZIAK

2014-03-01

Full Text Available The paper presents the operating characteristics of the worm agglomeration machine. The paper indicates the need for continuous monitoring of the value of the torque due to the efficiency of the machine. An original structure of torque meter which is built in the standard drive system of briquetting machine was presented. A number of benefits arising from the application of the proposed solution were presented. Exemplary measurement results obtained by means of this torque meter were presented.

Genetic variation in the Critically Endangered velvet worm ...

African Journals Online (AJOL)

In the present study the genetic variation of the Critically Endangered velvet worm species Opisthopatus roseus is examined. This species is endemic to the Ngele mistbelt forest in the KwaZulu-Natal province of South Africa. In recent years the forest has been severely impacted by anthropogenic activities such as logging of ...

Sediment-worm interaction: transfer of 65Zn from marine silt by the polychaete, Nereis diversicolor

International Nuclear Information System (INIS)

Renfro, W.C.; Benayoun, G.

1976-01-01

Marine polychaete worms (Nereis diversicolor) accumulated 65 Zn sorbed to silty marine sediment for 5 days and were then transferred to nonradioactive sediment in the laboratory and in the sea. The mean biological half-life (T/sub B//2/) for the laboratory worms did not differ greatly from that for worms in the sea. Worms living in small flowing seawater systems containing 16 cm 3 of sediment accumulated 65 Zn added to each system in the form of radioactive organic detritus. Higher percentage uptake of 65 Zn was from radioactive detritus particles 0.2 to 2 mm in diameter resting on the sediment surface or mixed with sediment than from finely-ground ( 65 Zn coprecipitated from fresh water with Fe(OH) 3 was accumulated by N. diversicolor when the precipitate was on the sediment surface than when the precipitate was well mixed with the sediment. These experimental results indicate that benthic organisms may take up limited amounts of heavy metals associated with bottom sediments and recycle them to benthic and pelagic food webs

The relationships between faecal worm egg count and subjectively ...

African Journals Online (AJOL)

Subjectively assessed wool and conformation traits form part of the selection objective in wool sheep enterprises. The present study investigated the genetic, phenotypic and environmental correlations for nematode resistance (using faecal worm egg count (FEC)) with subjectively assessed wool and conformation traits.

Fourier transform infrared microspectroscopy for the analysis of the biochemical composition of C. elegans worms.

Science.gov (United States)

Sheng, Ming; Gorzsás, András; Tuck, Simon

2016-01-01

Changes in intermediary metabolism have profound effects on many aspects of C. elegans biology including growth, development and behavior. However, many traditional biochemical techniques for analyzing chemical composition require relatively large amounts of starting material precluding the analysis of mutants that cannot be grown in large amounts as homozygotes. Here we describe a technique for detecting changes in the chemical compositions of C. elegans worms by Fourier transform infrared microspectroscopy. We demonstrate that the technique can be used to detect changes in the relative levels of carbohydrates, proteins and lipids in one and the same worm. We suggest that Fourier transform infrared microspectroscopy represents a useful addition to the arsenal of techniques for metabolic studies of C. elegans worms.

Short-Term Effects of the Anti-sea Lice Therapeutant Emamectin Benzoate on Clam Worms (Nereis virens).

Science.gov (United States)

McBriarty, G J; Kidd, K A; Burridge, L E

2018-05-01

The polychaete Nereis virens occurs commonly in marine sediments, is widely distributed, and is a popular bait species, as well as a potential replacement for wild-caught fish in commercial fish feed preparations. It is being considered as a potential co-extractive species for culture in integrated multi-trophic aquaculture operations. However, it is not known whether pesticides or drugs used to treat sea lice on farmed salmon, such as emamectin benzoate (EB), would adversely affect cultured or wild worms, because these compounds may persist in the environment. To determine the potential effects of EB to N. virens, bioassays were performed wherein worms were exposed in sand for 30 days to a concentration of 400 µg/kg dw (nominal). While no treatment-related mortality occurred, significant decreases in worm mass and marked behavioral changes (lack of burrowing) were observed in EB-treated sand compared with controls. These lab-based observations suggest a potential hazard to worms at sites where EB treatments have occurred.

Track-a-worm, an open-source system for quantitative assessment of C. elegans locomotory and bending behavior.

Directory of Open Access Journals (Sweden)

Sijie Jason Wang

Full Text Available A major challenge of neuroscience is to understand the circuit and gene bases of behavior. C. elegans is commonly used as a model system to investigate how various gene products function at specific tissue, cellular, and synaptic foci to produce complicated locomotory and bending behavior. The investigation generally requires quantitative behavioral analyses using an automated single-worm tracker, which constantly records and analyzes the position and body shape of a freely moving worm at a high magnification. Many single-worm trackers have been developed to meet lab-specific needs, but none has been widely implemented for various reasons, such as hardware difficult to assemble, and software lacking sufficient functionality, having closed source code, or using a programming language that is not broadly accessible. The lack of a versatile system convenient for wide implementation makes data comparisons difficult and compels other labs to develop new worm trackers. Here we describe Track-A-Worm, a system rich in functionality, open in source code, and easy to use. The system includes plug-and-play hardware (a stereomicroscope, a digital camera and a motorized stage, custom software written to run with Matlab in Windows 7, and a detailed user manual. Grayscale images are automatically converted to binary images followed by head identification and placement of 13 markers along a deduced spline. The software can extract and quantify a variety of parameters, including distance traveled, average speed, distance/time/speed of forward and backward locomotion, frequency and amplitude of dominant bends, overall bending activities measured as root mean square, and sum of all bends. It also plots worm travel path, bend trace, and bend frequency spectrum. All functionality is performed through graphical user interfaces and data is exported to clearly-annotated and documented Excel files. These features make Track-A-Worm a good candidate for implementation in

Aquatic worms eating waste sludge in a continuous system

NARCIS (Netherlands)

Hendrickx, T.L.G.; Temmink, B.G.; Elissen, H.J.H.; Buisman, C.J.N.

2009-01-01

Aquatic worms are a biological approach to decrease the amount of biological waste sludge produced at waste water treatment plants. A new reactor concept was recently introduced in which the aquatic oligochaete Lumbriculus variegatus is immobilised in a carrier material. The current paper describes

Repeated inoculations with the lung and heartworm nematode Angiostrongylus vasorum result in increasing larval excretion and worm burden in the red fox (Vulpes vulpes).

Science.gov (United States)

Woolsey, Ian David; Webster, P; Thamsborg, S; Schnyder, Manuela; Monrad, Jesper; Kapel, C M O

2017-12-01

The French heartworm Angiostongylus vasorum is found in European red fox ( Vulpes vulpes ) and dog populations, where it appears to be spreading geographically. Once introduced into new areas, it establishes in local fox populations, typically to over 50% prevalence in a few years. High susceptibility and constant excretion of first stage larvae (L1) by the definitive hosts are prerequisites for sustaining high parasite biomass in a particular habitat. The present study explores the hypothesis that repeated ingestion of gastropods in nature will result in accumulation of adult worms and elevated excretion of L1 in feces. Experimentally infected foxes were subsequently inoculated via stomach tube once (9 weeks post initial inoculation) or twice (9 and 13 weeks post inoculation (wpi)) with 100 third stage A. vasorum larvae (L3) previously isolated from aquatic snails infected with L1 from a naturally infected dog. Despite large variation in fecal larval excretion for the individual animals within the groups, excretion of L1 was significantly higher in foxes twice inoculated as compared to foxes inoculated only once. With an outlier in the once inoculated group removed, excretion became significantly higher in the three times inoculated group. Establishment of adult worms varied and only a trend to higher worm burdens was found in the group of foxes inoculated three times. However, this became significant with the same single outlier removed. Overall, it appears that protective immunity to A. vasorum does not appear to occur in V. vulpes with animals exhibiting high infection intensities without obvious clinical signs. The increasing larval excretion in foxes being repeatedly exposed to A. vasorum L3 support the hypothesis that foxes under natural conditions may repeatedly ingest infected gastropods and remain a source of environmental contamination for several months, potentially contributing to the establishment of endemic foci through increasing L1 excretion.

Additional file 4: Figure S2. of WorMachine: machine learning-based phenotypic analysis tool for worms

OpenAIRE

Hakim, Adam; Mor, Yael; Toker, Itai; Levine, Amir; Neuhof, Moran; Markovitz, Yishai; Rechavi, Oded

2018-01-01

Features used to establish worm masculinity. Violin plots show the morphological features (A) and fluorescent features (B) used to determine the masculinity of him-5; [tph-1p::GFP] worms. A total of 545 pre-labeled worms of each sex were used for analysis (****p < 10–4, ***p < 10–3, *p < 0.05, two-tailed t test after α = 0.01 trimming to exclude extreme outliers with false discovery rate (FDR) correction for multiple comparisons). Only features that were significantly distinct and had pl...

Worm Infestation And Anaemia Among Pre-school Children Of ...

African Journals Online (AJOL)

Background: Worm infection and anaemia are common childhood conditions in Nigeria. We assessed the status of helminthiasis and associated anaemia among pre school children of peasant farmers aged 1-5 years living in a rubber plantation near Calabar, Nigeria. Design: Cross sectional. Method: Three hundred and ...

The larval nervous system of the penis worm Priapulus caudatus (Ecdysozoa).

Science.gov (United States)

Martín-Durán, José M; Wolff, Gabriella H; Strausfeld, Nicholas J; Hejnol, Andreas

2016-01-05

The origin and extreme diversification of the animal nervous system is a central question in biology. While most of the attention has traditionally been paid to those lineages with highly elaborated nervous systems (e.g. arthropods, vertebrates, annelids), only the study of the vast animal diversity can deliver a comprehensive view of the evolutionary history of this organ system. In this regard, the phylogenetic position and apparently conservative molecular, morphological and embryological features of priapulid worms (Priapulida) place this animal lineage as a key to understanding the evolution of the Ecdysozoa (i.e. arthropods and nematodes). In this study, we characterize the nervous system of the hatching larva and first lorica larva of the priapulid worm Priapulus caudatus by immunolabelling against acetylated and tyrosinated tubulin, pCaMKII, serotonin and FMRFamide. Our results show that a circumoral brain and an unpaired ventral nerve with a caudal ganglion characterize the central nervous system of hatching embryos. After the first moult, the larva attains some adult features: a neck ganglion, an introvert plexus, and conspicuous secondary longitudinal neurites. Our study delivers a neuroanatomical framework for future embryological studies in priapulid worms, and helps illuminate the course of nervous system evolution in the Ecdysozoa. © 2015 The Authors.

Complete mitochondrial genome of yellow meal worm (Tenebrio molitor).

Science.gov (United States)

Liu, Li-Na; Wang, Cheng-Ye

2014-11-18

The yellow meal worm (Tenebrio molitor L.) is an important resource insect typically used as animal feed additive. It is also widely used for biological research. The first complete mitochondrial genome of T. molitor was determined for the first time by long PCR and conserved primer walking approaches. The results showed that the entire mitogenome of T. molitor was 15 785 bp long, with 72.35% A+T content [deposited in GenBank with accession number KF418153]. The gene order and orientation were the same as the most common type suggested as ancestral for insects. Two protein-coding genes used atypical start codons (CTA in ND2 and AAT in COX1), and the remaining 11 protein-coding genes started with a typical insect initiation codon ATN. All tRNAs showed standard clover-leaf structure, except for tRNA(Ser) (AGN), which lacked a dihydrouridine (DHU) arm. The newly added T. molitor mitogenome could provide information for future studies on yellow meal worm.

Polyanhydride Nanoparticle Delivery Platform Dramatically Enhances Killing of Filarial Worms.

Directory of Open Access Journals (Sweden)

Andrea M Binnebose

Full Text Available Filarial diseases represent a significant social and economic burden to over 120 million people worldwide and are caused by endoparasites that require the presence of symbiotic bacteria of the genus Wolbachia for fertility and viability of the host parasite. Targeting Wolbachia for elimination is a therapeutic approach that shows promise in the treatment of onchocerciasis and lymphatic filariasis. Here we demonstrate the use of a biodegradable polyanhydride nanoparticle-based platform for the co-delivery of the antibiotic doxycycline with the antiparasitic drug, ivermectin, to reduce microfilarial burden and rapidly kill adult worms. When doxycycline and ivermectin were co-delivered within polyanhydride nanoparticles, effective killing of adult female Brugia malayi filarial worms was achieved with approximately 4,000-fold reduction in the amount of drug used. Additionally the time to death of the macrofilaria was also significantly reduced (five-fold when the anti-filarial drug cocktail was delivered within polyanhydride nanoparticles. We hypothesize that the mechanism behind this dramatically enhanced killing of the macrofilaria is the ability of the polyanhydride nanoparticles to behave as a Trojan horse and penetrate the cuticle, bypassing excretory pumps of B. malayi, and effectively deliver drug directly to both the worm and Wolbachia at high enough microenvironmental concentrations to cause death. These provocative findings may have significant consequences for the reduction in the amount of drug and the length of treatment required for filarial infections in terms of patient compliance and reduced cost of treatment.

THE WORMS COMPOST - EFFECTIVE FERTILIZER FOR IMPROVING DEGRADED SOILS

Directory of Open Access Journals (Sweden)

Larisa CREMENEAC

2013-01-01

Full Text Available Management of organic waste is a difficult, complex and intractable in Moldova, according to international standards. Acute problem of organic matter from livestock sector waste is generated by storing them in unauthorized areas. Organic waste management strategies require different methods. One of them is organic waste bio conversion technology by worm’s cultivation. As the main natural wealth of the Republic of Moldova, soil requires a special care. Agriculture, in particular, should pay attention to the soil’s humus and nutrient status – and restore losses of humus and the nutrients used by crops. This requires measures to improve soil fertility. Land use provides, first of all return losses of humus and nutrients used by plants. Therefore measures required to improve soil fertility. The essence of the research was to highlight the role of worms compost improve the soil. To this end, in ETS "Maximovca" was organized an experiment that included three groups (two - experimental, to fund worms compost and one - control the natural background. Observations on soil fertility have been conducted over three years. The soil samples were collected by usual methods determined values of organic matter and humus. The results of the investigations, to determine the values of organic matter and humus samples collected from surface and depth 15 cm exceeded that of the sample control group to 29,7%; 11,4% and 34,3%; 37,1% in experimental group I and 9,3%; 11,6% and 45,5%; 45,5% in experimental group II. Therefore, worms compost embedded in a dose of 3-4 tons / ha during three years, has improved the fertility of the soil

Approach to the resistance of exportation tebo worms when irradiated with gamma ray through a quarantine treatment

Energy Technology Data Exchange (ETDEWEB)

Silva R, Samy; Zarate S, Herman; Aguirre H, Paulina [Comision Chilena de Energia Nuclear, Santiago (Chile)], e-mail: hzarate@cchen.cl, e-mail: paguirre@cchen.cl, e-mail: ssilva@cchen.cl; Aburto, Patricio [Expo Agro (Chile)], e-mail: expoag@expoag.cl

2009-07-01

The tebo worms or butterworms (Chilecomadia moorei) are widely used in Chile in fishing, and so are in the international markets although there are some countries, that use these species, to a less extent for preparing food reptiles. Some foreign countries requirements demand, from the exporters, to carry out quarantine treatments related to the sterilization by ionizing energy, however customers need to make sure about their products safety and that is why it is compulsory to establish limits in connection with worms' irradiation resistance. The irradiation effect on a worms sample using doses of 0.3; 0.45; 0.6 and 0.9 kGy was studied macroscopically, after 1 hour, and then 30, 60 and 90 days after the treatment. One of the equipment utilized had a Cobalt 60 source, where as the other one had Cesium 137 irradiators, with a dose rate of 42.7 Gy minute (min){sup -1} and 37.1 Gy min{sup -1}, respectively. The results concluded that tebo worms can resist more than 3 times the doses suggested by the meta countries without reducing the population drastically, nevertheless it is required to increase the number of worms to be analyzed in order to validate the findings. (author)

Approach to the resistance of exportation tebo worms when irradiated with gamma ray through a quarantine treatment

International Nuclear Information System (INIS)

Silva R, Samy; Zarate S, Herman; Aguirre H, Paulina; Aburto, Patricio

2009-01-01

The tebo worms or butterworms (Chilecomadia moorei) are widely used in Chile in fishing, and so are in the international markets although there are some countries, that use these species, to a less extent for preparing food reptiles. Some foreign countries requirements demand, from the exporters, to carry out quarantine treatments related to the sterilization by ionizing energy, however customers need to make sure about their products safety and that is why it is compulsory to establish limits in connection with worms' irradiation resistance. The irradiation effect on a worms sample using doses of 0.3; 0.45; 0.6 and 0.9 kGy was studied macroscopically, after 1 hour, and then 30, 60 and 90 days after the treatment. One of the equipment utilized had a Cobalt 60 source, where as the other one had Cesium 137 irradiators, with a dose rate of 42.7 Gy minute (min) -1 and 37.1 Gy min -1 , respectively. The results concluded that tebo worms can resist more than 3 times the doses suggested by the meta countries without reducing the population drastically, nevertheless it is required to increase the number of worms to be analyzed in order to validate the findings. (author)

The effect of antibiotic- and hydrocortisone-containing ointments in preventing secondary infections in guinea worm disease

DEFF Research Database (Denmark)

Magnussen, P.; Yakubu, A.; Bloch, P.

1994-01-01

A randomized, single-blind, controlled study comparing the efficacy of an ointment containing two antibiotics, one containing one antibiotic plus hydrocortisone, and no treatment in reducing secondary infections in patients with patent Guinea worm was undertaken in the northern region of Ghana. S...... for application at the early stage of patent Guinea worm infection....

Evaluation of community-based surveillance for Guinea worm, South ...

African Journals Online (AJOL)

2012-08-03

Aug 3, 2012 ... deleted at the Data Manager Level in Loki. Conclusion. Community-based surveillance for guinea worm is a good example of a surveillance system on which an integrated disease surveillance system can be based in countries with poor surveillance like South Sudan. This makes its potential value to ...

Petri Net and Probabilistic Model Checking Based Approach for the Modelling, Simulation and Verification of Internet Worm Propagation.

Directory of Open Access Journals (Sweden)

Misbah Razzaq

Full Text Available Internet worms are analogous to biological viruses since they can infect a host and have the ability to propagate through a chosen medium. To prevent the spread of a worm or to grasp how to regulate a prevailing worm, compartmental models are commonly used as a means to examine and understand the patterns and mechanisms of a worm spread. However, one of the greatest challenge is to produce methods to verify and validate the behavioural properties of a compartmental model. This is why in this study we suggest a framework based on Petri Nets and Model Checking through which we can meticulously examine and validate these models. We investigate Susceptible-Exposed-Infectious-Recovered (SEIR model and propose a new model Susceptible-Exposed-Infectious-Recovered-Delayed-Quarantined (Susceptible/Recovered (SEIDQR(S/I along with hybrid quarantine strategy, which is then constructed and analysed using Stochastic Petri Nets and Continuous Time Markov Chain. The analysis shows that the hybrid quarantine strategy is extremely effective in reducing the risk of propagating the worm. Through Model Checking, we gained insight into the functionality of compartmental models. Model Checking results validate simulation ones well, which fully support the proposed framework.

Effect of gamma-rays on some technologic properties of cocoon and filament of the silk worm (Bombyx mori L.)

International Nuclear Information System (INIS)

Binkh, T.T.; Petkov, N.; Malinova, K.

1993-01-01

The effect of irradiation of silk worm eggs with 1.00, 2.00, 3.00, 4.00, 5.00, 6.00 and 7.00 Gy gamma-rays on some major technologic properties of cocoons and filament of the mulbery silk worm was studied. Single irradiation of silk worm during the phase of highest lengthening of nucleus development causes both stimulating and inhibitory effect on the technologic properties of the cocoons and the filament. The degree of stimulation or inhibition is dependent on the irradiation dose, the specificity of technologic processes and biologic characteristics of silk worm species and hybrids. Gamma-irradiation with doses 2.00 and 3.00 Gy stimulates the increase in weight of silk covering by 2.07-8.28%, raw cocoon silkness by 0.38-3.21 points and length of cocoon filament by 40-151 m. Irradiation of silk worm eggs with 2.00-4.00 Gy gamma-rays decreases by 1.4-2.3 kg (12.61-21.91%) the quantity of raw cocoons, required for production of 1 kg grege. 9 refs., 4 tabs. (author)

Dracunculus medinensis (Guinea worm disease): a rare cause of calcification

Energy Technology Data Exchange (ETDEWEB)

Gospos, C.

1980-01-01

Tangled whorly calcifications were seen in the abdominal subcutaneous tissues of a negro patient from Africa. The differential diagnosis of such calcifications - rarely observed in Europe - includes a variety of parasites. In this patient, Dracunculus medinensis (guinea worm disease) was the cause.

Gastrostomy Tube (G-Tube)

Science.gov (United States)

... any of these problems: a dislodged tube a blocked or clogged tube any signs of infection (including redness, swelling, or warmth at the tube site; discharge that's yellow, green, or foul-smelling; fever) excessive bleeding or drainage from the tube site severe abdominal pain lasting ...

Influence of tubificid worms on nutrient fluxes across water-sediment interface in fish farm settling ponds

Directory of Open Access Journals (Sweden)

Puigagut J.

2014-04-01

Full Text Available The influence of tubificid worms on nutrient translocation from water to fish farm sediments accumulating in settling ponds was addressed under laboratory conditions. Small microcosms of 0.5 L were filled up with 35 g of sludge from a fish farm settling pond and 0.15 L of filtered settling pond water. The experimental set up consisted of one control line (no worms added, a second experimental line with 1 mg of tubificid worms·g-1 fresh sediment (550 individuals·m-2 and a third experimental line with 40 mg of tubificid worms·g-1 fresh sediment (22 000 individuals·m-2. Nutrients translocation was determined by monitoring overlaying water concentration of ammonia, nitrate and phosphate for ten days. Results showed that abundances of 550 individuals·m-2 had no significant influence on the fluxes of nutrients here considered. However, the influence of higher abundances of tubificids (22 000 individuals·m-2 was of significant extent on the translocation of nitrate and phosphate. Accordingly, bioturbation of tubificids caused 55% lower nitrate uptake by the sediment when compared to control conditions. Phosphorus released by the sediments of the control condition was ca. 90% higher than that recorded under abundances of tubificids (22 000 individuals·m-2. Results obtained allowed us to estimate that fish farm settling ponds highly colonized by tubificid worms (22 000 individuals·m-2 may contribute to decrease phosphorus discharge (in terms of soluble phosphorus in ca. 5 g of P·ton-1 of fish produced.

Life-cycle of the European compost worm Dendrobaena veneta ...

African Journals Online (AJOL)

The life-cycle of Dendrobaena veneta was studied to assess the potential of this species in vermiculture. The development, growth and reproduction were investigated by rearing worms at 25°C on urine-free cattle manure with a moisture content of 80% over a period of 200 days. It was found that cocoons are produced at a ...

Faeco-histological Method of Studying Worm Endemicity with the ...

African Journals Online (AJOL)

Worms are endemic in various parts of the world, the patterns varying from community to community, even in the same country. A rough index of those common among Nigerians of the Igbo ethnic group has been obtained using a histological study of the ova present in the luminal faeces of the vermiform appendix in 559 ...

A new reactor concept for sludge reduction using aquatic worms

NARCIS (Netherlands)

Elissen, H.J.H.; Hendrickx, T.L.G.; Temmink, B.G.; Buisman, C.J.N.

2006-01-01

Biological waste water treatment results in the production of waste sludge. The final treatment option in The Netherlands for this waste sludge is usually incineration. A biological approach to reduce the amount of waste sludge is through predation by aquatic worms. In this paper we test the

Allozyme variation in two populations of the Mopane worm, Imbrasia ...

African Journals Online (AJOL)

The aims of this study were to determine whether the limited flight ability of moths has an effect on gene flow between two geographically distant I. belina populations, whether there are gene expression differences between moths, worms and pupae and whether staggered generations have different genotypic expressions.

Schistosoma mansoni: effects of anesthetics and antimonial drugs on worm shift in the mouse

Directory of Open Access Journals (Sweden)

José Renan da Cunha-Melo

1986-08-01

Full Text Available Mice experimentally infected with Schistosoma mansoni were injected with sodium thiopental or sodium antimonyl gluconate (Triostib R, or submitted to halothane inhalation, with or without a previous injection of thiopental. Data obtained showed that halothane and thiopental induce worm shift to the liver (99 and 76%, respectively. Sodium gluconate and antimonium (Triostib R shifted 52% of worms towards the liver. These results seem to indicate that the use of antimonium would be unnecessary, when surgical removal of schistosomules is carried out through the extracorporeal filtration technique, in patients with portal hypertension.

Uptake of TiO2 Nanoparticles into C. elegans Neurons Negatively Affects Axonal Growth and Worm Locomotion Behavior.

Science.gov (United States)

Hu, Chun-Chih; Wu, Gong-Her; Hua, Tzu-En; Wagner, Oliver I; Yen, Ta-Jen

2018-03-14

We employ model organism Caenorhabditis elegans to effectively study the toxicology of anatase and rutile phase titanium dioxide (TiO 2 ) nanoparticles (NPs). The experimental results show that nematode C. elegans can take up fluorescein isothiocyanate-labeled TiO 2 NPs and that both anatase and rutile TiO 2 NPs can be detected in the cytoplasm of cultured primary neurons imaged by transmission electron microscopy. After TiO 2 NP exposure, these neurons also grow shorter axons, which may be related to the detected impeded worm locomotion behavior. Furthermore, anatase TiO 2 NPs did not affect the worm's body length; however, we determined that a concentration of 500 μg/mL of anatase TiO 2 NPs reduced the worm population by 50% within 72 h. Notably, rutile TiO 2 NPs negatively affect both the body size and worm population. Worms unable to enter the L4 larval stage explain a severe reduction in the worm population at TiO 2 NPs LC 50 /3d. To obtain a better understanding of the cellular mechanisms involved in TiO 2 NP intoxication, DNA microarray assays were employed to determine changes in gene expression in the presence or absence of TiO 2 NP exposure. Our data reveal that three genes (with significant changes in expression levels) were related to metal binding or metal detoxification (mtl-2, C45B2.2, and nhr-247), six genes were involved in fertility and reproduction (mtl-2, F26F2.3, ZK970.7, clec-70, K08C9.7, and C38C3.7), four genes were involved in worm growth and body morphogenesis (mtl-2, F26F2.3, C38C3.7, and nhr-247), and five genes were involved in neuronal function (C41G6.13, C45B2.2, srr-6, K08C9.7, and C38C3.7).

Guinea worm eradication program in Borno state: The need for ...

African Journals Online (AJOL)

The objective of this study is to update the status of Guinea worm and Eradication Program in Borno State and to demonstrate the effectiveness of adopting appropriate intervention strategies. The assessment of the prevalence of Dracunculus medinensis was carried out by active case search. Three hundred and ten ...

Some parasitic worms in freshwater fishes and fish-predators from ...

African Journals Online (AJOL)

This report concerns a collection of parasitic worms from South Africa, and contains a new species of monogenean, Gyrodactylus transvaalensis, six species of adult trematodes, including a new species of Phyllodistomum.P. van der waali, two metacercariae of the Family Clinostomidae and three of the Order Strigeida, ...

Effects on Packed Cell Volume and Parasitic Worm Load from ...

African Journals Online (AJOL)

Their packed cell volumes were estimated with centrifuge hematocrit and stool examined for parasitic worms with saline wet prep microscopy. A dose of Albendazole was administered to the study group. The data presented in Microsoft Excel spread sheet, were then analysed using SPSS version 17, T-test and Chi Square ...

The life-cycle of the compost worm (Oligochaeta) | Venter | African ...

African Journals Online (AJOL)

To determine the full potential of the compost worm Eisenia fetida as waste processor and as source of protein, the life-cycle of this species had to be studied thoroughly. The development, growth and reproduction of Eisenia fetida were studied on cattle manure under favourable conditions of moisture, temperature and ...

Genetic parameters and relationships of faecal worm egg count with ...

African Journals Online (AJOL)

The costs of internal parasite control and treatment are potentially very high in grazing sheep. Faecal worm egg count (FEC) has been suggested as a suitable criterion for selection for resistance to nematode infestation in livestock. Genetic parameter estimates for FEC and its relationship with wool traits were assessed in ...

Anthelmintic activity in vivo of epiisopiloturine against juvenile and adult worms of Schistosoma mansoni.

Directory of Open Access Journals (Sweden)

Maria A Guimarães

2015-03-01

Full Text Available Schistosomiasis is a serious disease currently estimated to affect more that 207 million people worldwide. Due to the intensive use of praziquantel, there is increasing concern about the development of drug-resistant strains. Therefore, it is necessary to search for and investigate new potential schistosomicidal compounds. This work reports the in vivo effect of the alkaloid epiisopiloturine (EPI against adults and juvenile worms of Schistosoma mansoni. EPI was first purified its thermal behavior and theoretical solubility parameters charaterised. In the experiment, mice were treated with EPI over the 21 days post-infection with the doses of 40 and 200 mg/kg, and 45 days post-infection with single doses of 40, 100 and 300 mg/kg. The treatment with EPI at 40 mg/kg was more effective in adult worms when compared with doses of 100 and 300 mg/kg. The treatment with 40 mg/kg in adult worms reduced parasite burden significantly, lead to reduction in hepatosplenomegaly, reduced the egg burden in faeces, and decreased granuloma diameter. Scanning electron microscopy revealed morphological changes to the parasite tegument after treatment, including the loss of important features. Additionally, the in vivo treatment against juvenile with 40 mg/kg showed a reduction of the total worm burden of 50.2%. Histopathological studies were performed on liver, spleen, lung, kidney and brain and EPI was shown to have a DL50 of 8000 mg/kg. Therefore EPI shows potential to be used in schistosomiasis treatment. This is the first time that schistosomicidal in vivo activity of EPI has been reported.

Kilima-mrota is not a worm: the effect of conservation education and ...

African Journals Online (AJOL)

Kilima-mrota is not a worm: the effect of conservation education and a local naming contest on the perspectives held by the peoples of Sagalla Hill, Kenya toward the Sagalla Caecilian Boulengerula niedeni.

Experimental Ascaris suum infection in the pig: protective memory response after three immunizations and effect of intestinal adult worm population

DEFF Research Database (Denmark)

Jungersen, Gregers; Eriksen, Lis; Roepstorff, Allan

1999-01-01

The protective immune response to larval migration in pigs, with or without adult intestinal worm populations, 10 weeks after 3 weekly Ascaris suum inoculations, was studied in 45 pigs. Controlled adult worm populations were achieved by oral transfer of 10 adult worms to previously immunized pigs...... after anthelmintic drenching. A significant reduction in larval recovery from lungs on day 7, and small intestine on day 14, was observed in immunized pigs compared with previously uninfected control pigs after challenge inoculation. The strong anamnestic response to larval migration was characterized...

Global coordination and standardisation in marine biodiversity through the World Register of Marine Species (WoRMS and related databases.

Directory of Open Access Journals (Sweden)

Mark J Costello

Full Text Available The World Register of Marine Species is an over 90% complete open-access inventory of all marine species names. Here we illustrate the scale of the problems with species names, synonyms, and their classification, and describe how WoRMS publishes online quality assured information on marine species. Within WoRMS, over 100 global, 12 regional and 4 thematic species databases are integrated with a common taxonomy. Over 240 editors from 133 institutions and 31 countries manage the content. To avoid duplication of effort, content is exchanged with 10 external databases. At present WoRMS contains 460,000 taxonomic names (from Kingdom to subspecies, 368,000 species level combinations of which 215,000 are currently accepted marine species names, and 26,000 related but non-marine species. Associated information includes 150,000 literature sources, 20,000 images, and locations of 44,000 specimens. Usage has grown linearly since its launch in 2007, with about 600,000 unique visitors to the website in 2011, and at least 90 organisations from 12 countries using WoRMS for their data management. By providing easy access to expert-validated content, WoRMS improves quality control in the use of species names, with consequent benefits to taxonomy, ecology, conservation and marine biodiversity research and management. The service manages information on species names that would otherwise be overly costly for individuals, and thus minimises errors in the application of nomenclature standards. WoRMS' content is expanding to include host-parasite relationships, additional literature sources, locations of specimens, images, distribution range, ecological, and biological data. Species are being categorised as introduced (alien, invasive, of conservation importance, and on other attributes. These developments have a multiplier effect on its potential as a resource for biodiversity research and management. As a consequence of WoRMS, we are witnessing improved

Global Coordination and Standardisation in Marine Biodiversity through the World Register of Marine Species (WoRMS) and Related Databases

Science.gov (United States)

Bouchet, Philippe; Boxshall, Geoff; Fauchald, Kristian; Gordon, Dennis; Hoeksema, Bert W.; Poore, Gary C. B.; van Soest, Rob W. M.; Stöhr, Sabine; Walter, T. Chad; Vanhoorne, Bart; Decock, Wim

2013-01-01

The World Register of Marine Species is an over 90% complete open-access inventory of all marine species names. Here we illustrate the scale of the problems with species names, synonyms, and their classification, and describe how WoRMS publishes online quality assured information on marine species. Within WoRMS, over 100 global, 12 regional and 4 thematic species databases are integrated with a common taxonomy. Over 240 editors from 133 institutions and 31 countries manage the content. To avoid duplication of effort, content is exchanged with 10 external databases. At present WoRMS contains 460,000 taxonomic names (from Kingdom to subspecies), 368,000 species level combinations of which 215,000 are currently accepted marine species names, and 26,000 related but non-marine species. Associated information includes 150,000 literature sources, 20,000 images, and locations of 44,000 specimens. Usage has grown linearly since its launch in 2007, with about 600,000 unique visitors to the website in 2011, and at least 90 organisations from 12 countries using WoRMS for their data management. By providing easy access to expert-validated content, WoRMS improves quality control in the use of species names, with consequent benefits to taxonomy, ecology, conservation and marine biodiversity research and management. The service manages information on species names that would otherwise be overly costly for individuals, and thus minimises errors in the application of nomenclature standards. WoRMS' content is expanding to include host-parasite relationships, additional literature sources, locations of specimens, images, distribution range, ecological, and biological data. Species are being categorised as introduced (alien, invasive), of conservation importance, and on other attributes. These developments have a multiplier effect on its potential as a resource for biodiversity research and management. As a consequence of WoRMS, we are witnessing improved communication within the

Survey of Optimal Temperature and Moisture for Worms Growth and Operating Vermicompost Production of Food Wastes

OpenAIRE

A Eslami; A Nabaey; R Rostami

2009-01-01

"n "nBackground and Objectives:Nowadays vermicompost production of food wastes is posed as one of appropriate methods to food wastes. disposal, its production used in agriculture and gardening. Moreover this process has some by products beside useful fertilizer that one of them is the worms. we can use them in variety of products specially in production of poultry and fish food. So determination of optimal condition for operating vermicompost production process of food wastes and worms. growt...

PCB concentrations in intertidal sipunculan (Phylum Sipuncula) marine worms from the Pacific coast of Costa Rica

International Nuclear Information System (INIS)

Spongberg, Alison L.

2006-01-01

Specimens of the sipunculans Phascolosoma perlucens, Antillesoma antillarum, and Sipunculus nudus, were collected for PCB analysis in three coastal embayments of the Pacific coast of Costa Rica in October 2005. After collection the worms were kept in cool sea water and transferred to the laboratory for freeze drying. Half of the specimens of S. nudus were purified in filtered sea water for 72 h before freeze drying. The whole worm sample was ground, using a mortar and pestle prior to being extracted with dichloromethane solvent. The extract was cleaned using a florisil column and analyzed using a 6890 Hewlett-Packard gas chromatograph equipped with a mass selective detector. Recovery efficiencies averaged between 72 and 80 %. Data are not corrected for blank or recovery efficiencies. Concentration data were calculated based on comparison with standards for Arochlor 1221, 1242, 1248 and 1254 (Supelco, Inc.). No worm samples were identified with six of more chlorine atoms. However, the higher chlorinated congeners were identified in the standards. Therefore, the lack of chlorination in the worms was not an analytical artifact. The sum of identifiable PCBs ranged from a barely discernible 0.01 ng/g dry wt in an A. antillarum sample from Bahia de Culebra to 67.71 ng/g dry wt in a P. perlucens sample obtained near the Rio Rincon in the inner Golfo Dulce. S. nudus worm samples from the Cocorocas sand flat in the Golfo de Nicoya had relatively high concentrations of PCBs whether they were purified or not. The samples from Costa Rica are low in PCBs, especially compared to the marine sediment samples measured previously in Costa Rica. This was the first attempt to identify and quantify the presence of PCBs in any marine organisms from the Pacific coast of Costa Rica. (author) [es

Potential Test of Irradiated Vaccine for Haemonchus Contortus Worm and Food Supplement on Sheep

International Nuclear Information System (INIS)

Sukardji Partodiharjo; Arifin, M.; Endang Yuliawati; Enuh Rahardjo

2004-01-01

An experiment of vaccines was carried out is one of Nematoda worm present in abomasums or stomach of sheep or goat. The case in the field was high enough, may teach 60% the aim of this study is on observe the effect of gastric worm vaccination irradiated 5000 L 3 post challenge wild strain 5000 L 3 , The parameter of observe were clinic, blood twice description number of adult worms, with 3 treatments as follows; control (K), V 2 = twice vaccinations without challenge V 1 twice vaccinations with challenge. The result of the study the average of gain (gram); V 1 =97, V 2 =91 and K=31.20 (P 6 ), V 1 =6.50, V 2 =5.90 and K=6.10 (P 1 =29.30, V 2 =35.30 and K=27.50 (P 3 ), V 1 =9.30, V 2 =9.00 and K=7.40 (P 1 =8.30, V 2 =9.50 and K=6.20 (P 1 immunity respond of weight gain, erythrocyte and leucocyte to have immunity which is better than the respond of other treatments. (author)

Metabolic rates, enzyme activities and chemical compositions of some deep-sea pelagic worms, particularly Nectonemertes mirabilis (Nemertea; Hoplonemertinea) and Poeobius meseres (Annelida; Polychaeta)

Science.gov (United States)

Thuesen, Erik V.; Childress, James J.

1993-05-01

Investigations of metabolic rate, enzyme activity and chemical composition were undertaken on two abundant deep-sea pelagic worms: Nectonemertes mirabilis (Nemertea; Hoplonemertinea) and Poeobius meseres (Annelida; Polychaeta). Six other species of worms ( Pelagonemertes brinkmanni (Nemertea) and the following polychaetes: Pelagobia species A, Tomopteris nisseni, Tomopteris pacifica, Tomopteris species A, and Traviopsis lobifera) were captured in smaller numbers and used for comparison in the physiological and biochemical measurements. Polychaete worms had the highest oxygen consumption rates and, along with N. mirabilis, displayed significant size effects on metabolic rate. Poeobius meseres had the lowest rates of oxygen consumption and displayed no significant relationship of oxygen consumption rate to wet weight. No significant effect of size on the activities of citrate synthase, lactate dehydrogenase or pyruvate kinase was observed in P. meseres or N. mirabilis. Lipid content was higher than protein content for all the worms in this study. Carbohydrate was of little significance in these worms and was usually metabolic rates. It appears that polychaete worms as a group have higher metabolic rates than bathypelagic shrimps, copepods and fishes, and may be the animals with the highest metabolic rates in the bathypelagic regions of the world's oceans.

Schistosoma mansoni: quantitative aspects of the fertility and survival of worms obtained from irradiated cercariae (3 Krad), in mice

International Nuclear Information System (INIS)

Sa Cardoso, G. de; Coelho, P.M.Z.

1990-01-01

The effect of gamma irradiation on the fertility of female mice, as well as the survival of worms in their portal system, have been observed in four groups of outbred albino mice (Mus musculus), experimentally infected with ca 450 cercariae of Schistosoma mansoni (LE and SJ strains), by transcutaneous route. The cercariae used were a) non-irradiated (control groups), and b) irradiated with 3 Krad of gamma irradiation (Co-60). From the 33 rd day on, some stability in the population of surviving worm could be observed. This population remained constant till the end of the observation period (90 th day), notedly in relation to the LE strain . Thus, it was concluded that gamma irradiation (at the dose of 3 Krad) is able to hinder the worm egg production in 98.1% of the infected mice. Further, it was observed that the few detected eggs were dead. Females were found to be more resistant to irradiation. The irradiation effect on the mortality of male worms was statistically significant scarcely from the 61 st day on. The long period of permanence of the sterile adult irradiated worms in the portal system of mice and their probable involvement in the development of immuno-protection (the so-called concomitant immunity, without the immuno-pathological involvements for the host) are here discussed. (author)

Worm burden and leukocyte response in Angiostrongylus malaysiensis-infected rats: the influence of testosterone.

Science.gov (United States)

Kamis, A B; Ahmad, R A; Badrul-Munir, M Z

1992-01-01

Gonadectomized male albino rats aged 7 weeks were given 1.5 mg/kg testosterone propionate daily and inoculated with 50 third-stage larvae of Angiostrongylus malaysiensis. The treatment significantly increased the number of larvae and adult worms recovered from the brain and pulmonary arteries, respectively, and the rats exhibited smaller thymus glands. The total numbers of leukocytes, monocytes, neutrophils, and especially eosinophils increased significantly post-infection, but the counts were higher in the untreated infected controls. Presumably, immunosuppressive effects of testosterone may at least partly be responsible for the higher loads of A. malaysiensis worms found in male rats as compared with females in the field.

The hatching larva of the priapulid worm Halicryptus spinulosus

OpenAIRE

Janssen, Ralf; Wennberg, Sofia A; Budd, Graham E

2009-01-01

Abstract Despite their increasing evolutionary importance, basic knowledge about the priapulid worms remains limited. In particular, priapulid development has only been partially documented. Following previous description of hatching and the earliest larval stages of Priapulus caudatus, we here describe the hatching larva of Halicryptus spinulosus. Comparison of the P. caudatus and the H. spinulosus hatching larvae allows us to attempt to reconstruct the ground pattern of priapulid developmen...

Hybrid epidemic spreading - from Internet worms to HIV infection

OpenAIRE

Zhang, C.

2015-01-01

Epidemic phenomena are ubiquitous, ranging from infectious diseases, computer viruses, to information dissemination. Epidemics have traditionally been studied as a single spreading process, either in a fully mixed population or on a network. Many epidemics, however, are hybrid, employing more than one spreading mechanism. For example, the Internet worm Conficker spreads locally targeting neighbouring computers in local networks as well as globally by randomly probing any computer on the Inter...

Accumulation of polycyclic aromatic hydrocarbons from creosote-contaminated soil in selected plants and the oligochaete worm Enchytraeus crypticus

Energy Technology Data Exchange (ETDEWEB)

Ann-Sofie Allard; Marianne Malmberg; Alasdair H. Neilson; Mikael Remberger [IVL, Stockholm (Sweden). Swedish Environmental Research Institute

2005-07-01

The accumulation of PAHs from a creosote-contaminated soil was examined in laboratory experiments using English ryegrass (Lolium perenne), white clover (Trifolium repens) and radish (Raphanus sativus), and the oligochaete worm Enchytraeus crypticus. Toxicity to the plants and the worms was assessed, and a soil sample mixed with calcined sand was used for accumulation experiments to avoid interference from toxicity in the soil. Accumulation of potentially carcinogenic PAHs varied among the plants, and there was a linear relation between concentrations of PAHs in the soil and in the plants. Correlations between values of the biota-soil accumulation factors and octanol-water partition coefficients, or water solubility varied among the plants and were rather weak, so that lipophilic character or water solubility of the PAHs alone cannot explain PAH accumulation. Accumulation of carcinogenic PAHs from the soil, in the presence of the other PAHs was greatest for Trifolium repens. PAHs were accumulated in the oligochaete worm (Enchytraeus crypticus), and biota-soil accumulation factors exceeded those for the plants. It is suggested that site-specific evaluation of contaminated sites should include not only chemical analysis and evaluation of toxicity but also accumulation of contaminants into biota such as plants and worms.

Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus

NARCIS (Netherlands)

Laarhoven, Bob; Elissen, H.J.H.; Temmink, H.; Buisman, C.J.N.

2016-01-01

An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv). The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water

From early lessons to new frontiers: The worm as a treasure trove of small RNA biology

Directory of Open Access Journals (Sweden)

Elaine M. Youngman

2014-11-01

Full Text Available In the past twenty years, the tiny soil nematode C. elegans has provided critical insights into our understanding of the breadth of small RNA-mediated gene regulatory activities. The first microRNA was identified in C. elegans in 1993, and the understanding that dsRNA was the driving force behind RNA-mediated gene silencing came from experiments performed in C. elegans in 1998. Likewise, early genetic screens in C. elegans for factors involved in RNAi pointed to conserved mechanisms for small RNA-mediated gene silencing pathways, placing the worm squarely among the founding fathers of a now extensive field of molecular biology. Today, the worm continues to be at the forefront of ground-breaking insight into small RNA-mediated biology. Recent studies have revealed with increasing mechanistic clarity that C. elegans possesses an extensive nuclear small RNA regulatory network that encompasses not only gene silencing but also gene activating roles. Further, a portrait is emerging whereby small RNA pathways play key roles in integrating responses to environmental stimuli and transmitting epigenetic information about such responses from one generation to the next. Here we discuss endogenous small RNA pathways in C. elegans and the insight worm biology has provided into the mechanisms employed by these pathways. We touch on the increasingly spectacular diversity of small RNA biogenesis and function, and discuss the relevance of lessons learned in the worm for human biology.

From early lessons to new frontiers: the worm as a treasure trove of small RNA biology.

Science.gov (United States)

Youngman, Elaine M; Claycomb, Julie M

2014-01-01

In the past 20 years, the tiny soil nematode Caenorhabditis elegans has provided critical insights into our understanding of the breadth of small RNA-mediated gene regulatory activities. The first microRNA was identified in C. elegans in 1993, and the understanding that dsRNA was the driving force behind RNA-mediated gene silencing came from experiments performed in C. elegans in 1998. Likewise, early genetic screens in C. elegans for factors involved in RNA interference pointed to conserved mechanisms for small RNA-mediated gene silencing pathways, placing the worm squarely among the founding fathers of a now extensive field of molecular biology. Today, the worm continues to be at the forefront of ground-breaking insight into small RNA-mediated biology. Recent studies have revealed with increasing mechanistic clarity that C. elegans possesses an extensive nuclear small RNA regulatory network that encompasses not only gene silencing but also gene activating roles. Further, a portrait is emerging whereby small RNA pathways play key roles in integrating responses to environmental stimuli and transmitting epigenetic information about such responses from one generation to the next. Here we discuss endogenous small RNA pathways in C. elegans and the insight worm biology has provided into the mechanisms employed by these pathways. We touch on the increasingly spectacular diversity of small RNA biogenesis and function, and discuss the relevance of lessons learned in the worm for human biology.

Human Schistosoma haematobium antifecundity immunity is dependent on transmission intensity and associated with immunoglobulin G1 to worm-derived antigens

DEFF Research Database (Denmark)

Wilson, Shona; Jones, Frances M.; van Dam, Govert J.

2014-01-01

BACKGROUND: Immunity that reduces worm fecundity and, in turn, reduces morbidity is proposed for Schistosoma haematobium, a parasite of major public health importance. Mathematical models of epidemiological trends suggest that antifecundity immunity is dependent on antibody responses to adult......-worm-derived antigen. METHODS: For a Malian cohort (age, 5-29 years) residing in high-transmission fishing villages or a moderate-transmission village, worm fecundity was assessed using the ratio of urinary egg excretion to levels of circulating anodic antigen, a Schistosoma-specific antigen that is steadily secreted......, host age and transmission were negatively associated with worm fecundity. A significant interaction term between host age and transmission indicates that antifecundity immunity develops earlier in high-transmission areas. SWA immunoglobulin G1 (IgG1) levels explained the effect of transmission...

Expression of five acetylcholine receptor subunit genes in Brugia malayi adult worms

Directory of Open Access Journals (Sweden)

Ben-Wen Li

2015-12-01

Full Text Available Acetylcholine receptors (AChRs are required for body movement in parasitic nematodes and are targets of “classical” anthelmintic drugs such as levamisole and pyrantel and of newer drugs such as tribendimidine and derquantel. While neurotransmission explains the effects of these drugs on nematode movement, their effects on parasite reproduction are unexplained. The levamisole AChR type (L-AChRs in Caenorhabditis elegans is comprised of five subunits: Cel-UNC-29, Cel-UNC-38, Cel-UNC-63, Cel-LEV-1 and Cel-LEV-8. The genome of the filarial parasite Brugia malayi contains nine AChRs subunits including orthologues of Cel-unc-29, Cel-unc-38, and Cel-unc-63. We performed in situ hybridization with RNA probes to localize the expression of five AChR genes (Bm1_35890-Bma-unc-29, Bm1_20330-Bma-unc-38, Bm1_38195-Bma-unc-63, Bm1_48815-Bma-acr-26 and Bm1_40515-Bma-acr-12 in B. malayi adult worms. Four of these genes had similar expression patterns with signals in body muscle, developing embryos, spermatogonia, uterine wall adjacent to stretched microfilariae, wall of Vas deferens, and lateral cord. Three L-AChR subunit genes (Bma-unc-29, Bma-unc-38 and Bma-unc-63 were expressed in body muscle, which is a known target of levamisole. Bma-acr-12 was co-expressed with these levamisole subunit genes in muscle, and this suggests that its protein product may form receptors with other alpha subunits. Bma-acr-26 was expressed in male muscle but not in female muscle. Strong expression signals of these genes in early embryos and gametes in uterus and testis suggest that AChRs may have a role in nervous system development of embryogenesis and spermatogenesis. This would be consistent with embryotoxic effects of drugs that target these receptors in filarial worms. Our data show that the expression of these receptor genes is tightly regulated with regard to localization in adult worms and developmental stage in embryos and gametes. These results may help to explain the

Atlantic Oceanography. Volume 1

Science.gov (United States)

1978-08-01

on the effect of environmental characteristics upon the encrusting calcareous-tube-making polychaete worm Hydroides dianthus has been begun, and it is...B. eb!Lineus. In spring 1978, work uas initiated on rearing the larvae of the calcareous encrusting tube worm Hydroides dianthus . Preliminary...larvae belonging to the coastal species, Balanus amphitrite and Hydroides dianthus and the estuarine barnacle, BaZanus ebur-neus. Some of the difficulties

Tongue worm (Pentastomida) infection in ball pythons (Python regius) – a case report

Science.gov (United States)

Gałęcki, Remigiusz; Sokół, Rajmund; Dudek, Agnieszka

Tongue worms (Pentastomida) are endoparasites causing pentastomiasis, an invasive disease representing a threat to exotic animals and humans. Animals acquire infection via the alimentary tract. In reptiles, the parasite is present in the lungs, resulting in symptoms from the respiratory system. Pentastomiasis may be asymptomatic, but nonspecific symptoms may occur at high parasite concentrations. Due to the harmful effects of many antiparasitic substances, tongue worm invasion in reptiles remains not fully treatable. Although pentasomiasis is rarely diagnosed in Poland, pentastomids were diagnosed in two ball pythons, who were patients of the “Poliklinika Weterynaryjna” veterinary clinic. They demonstrated problems with the respiratory system and a significant deterioration of health. Fenbendazole at a dose of 100 mg/kg b.w., repeated after 7 days was shown to be effective.

Effects of Doxycycline on gene expression in Wolbachia and Brugia malayi adult female worms in vivo

Directory of Open Access Journals (Sweden)

Rao Ramakrishna U

2012-02-01

Full Text Available Abstract Background Most filarial nematodes contain Wolbachia symbionts. The purpose of this study was to examine the effects of doxycycline on gene expression in Wolbachia and adult female Brugia malayi. Methods Brugia malayi infected gerbils were treated with doxycycline for 6-weeks. This treatment largely cleared Wolbachia and arrested worm reproduction. RNA recovered from treated and control female worms was labeled by random priming and hybridized to the Version 2- filarial microarray to obtain expression profiles. Results and discussion Results showed significant changes in expression for 200 Wolbachia (29% of Wolbachia genes with expression signals in untreated worms and 546 B. malayi array elements after treatment. These elements correspond to known genes and also to novel genes with unknown biological functions. Most differentially expressed Wolbachia genes were down-regulated after treatment (98.5%. In contrast, doxycycline had a mixed effect on B. malayi gene expression with many more genes being significantly up-regulated after treatment (85% of differentially expressed genes. Genes and processes involved in reproduction (gender-regulated genes, collagen, amino acid metabolism, ribosomal processes, and cytoskeleton were down-regulated after doxycycline while up-regulated genes and pathways suggest adaptations for survival in response to stress (energy metabolism, electron transport, anti-oxidants, nutrient transport, bacterial signaling pathways, and immune evasion. Conclusions Doxycycline reduced Wolbachia and significantly decreased bacterial gene expression. Wolbachia ribosomes are believed to be the primary biological target for doxycycline in filarial worms. B. malayi genes essential for reproduction, growth and development were also down-regulated; these changes are consistent with doxycycline effects on embryo development and reproduction. On the other hand, many B. malayi genes involved in energy production, electron

Influence of Parasitic Worm Infections on Allergy Diagnosis in Sub-Saharan Africa

NARCIS (Netherlands)

Amoah, Abena S.; Boakye, Daniel A.; Yazdanbakhsh, Maria; van Ree, Ronald

2017-01-01

Epidemiological studies from Sub-Saharan Africa indicate that allergies are on the rise in this region especially in urban compared to rural areas. This increase has been linked to improved hygiene, lifestyle changes, and lower exposure to pathogens in childhood. Reduced exposure to parasitic worm

Unravelling the protein preference of aquatic worms during waste activated sludge degradation

NARCIS (Netherlands)

de Valk, S.L.; Khadem, A.F.; van Lier, J.B.; de Kreuk, M.K.

2017-01-01

Worm predation (WP) by Tubifex tubifex was investigated using waste activated sludge (WAS) as the substrate. In order to better understand the sludge degradation mechanisms during WP, the activity of five common hydrolytic enzymes was determined and compared among the initial feed activated

Glycogen metabolism in Schistosoma mansoni worms after their isolation from the host

NARCIS (Netherlands)

Tiolens, A.G.M.; Bergh, S.G. van den

Adult Schistosoma mansoni worms rapidly degrade their endogenous glycogen stores immediately after isolation from the host. In NCTC 109 or in a diphasic culture medium the glycogen levels slowly recovered again after the initial decrease. The rapid degradation of glycogen could be prevented, even in

Baseline study of effects of ionizing radiation on the chromosomes of the marine worm, 'Neanthes arenaceodentata'. Technical note

International Nuclear Information System (INIS)

Pesch, G.G.; Young, J.S.

1981-09-01

Between 1946 and 1970 the United States disposed of low level radioactive waste at several sites in the Atlantic and Pacific Ocean. In 1972 the Environmental Protection Agency was authorized under the Marine Protection Research and Sanctuaries Act (PL-92-532) to regulate all ocean disposal activities. This Act requires EPA to establish a program for reviewing and evaluating ocean dumping permit applications. Before EPA can approve permits for ocean dumping of radioactive waste, it will be necessary to determine how such wastes may affect marine biota. The purpose of this study was to test the feasibility of using a marine coastal worm, Neanthes arenaceodentata, as a cytogenetic model for assessing radiation damage to ocean organisms. Groups of worms were exposed to cobalt-60, then slide preparations were made and scored for gross chromosome aberrations and damage. All the levels of ionizing radiation tested from 180-680 rads were found to cause significant chromosome damage in N. arenaceodentata. The nature of this damage depended on dose, dose-rate and DNA repair capability of the worm. Worms responded to the same dose range as do mice. Since mice are accepted models for studying radiation effects on humans, this study supports the utility of using this species to study radiation effects on marine organisms

A rabbit eye model for in vivo transformation of progenetic metacercariae of Clinostomum complanatum into ovigerous adult worms.

Science.gov (United States)

Rizvi, A; Zaidi, Z A; Alam, M M; Zafar, A; Shareef, P A A; Saifullah, M K; Saleemuddin, M; Abidi, S M A

2014-03-01

Clinostomum complanatum is a digenetic trematode that causes yellow grub disease in some fish species and also shows zoonotic potential by sporadically infecting humans. In this study, progenetic metacercariae of C. complanatum were obtained from the fish Trichogaster fasciatus, and were aseptically placed in conjunctival incisions made in the superior and inferior fornices of the eye of rabbits, which served as the experimental hosts. Worms were harvested without necropsy of the host on days 4 and 8 post infection, to observe in vivo transformation of the progenetic metacercariae into ovigerous adult worms. The worms appeared to cause minimal damage to the host although they were tenaciously attached. In vivo maturation was evident by the development of the vitellaria, enlargement of gonads, the presence of a large number of shelled eggs in a distended uterus and ramifications of the intestinal caeca. Obtaining mature ovigerous worms without sacrificing the host clearly gives the rabbit eye model an advantage over those described previously. Due to the relative advantage of the short time required for maturation and the prolific egg production by C. complanatum, it is suggested that this host-parasite system could be used as an excellent model for classroom teaching of trematode biology and to investigate the cues involved in in vivo transformation and host-parasite interactions.

Packet Payload Monitoring for Internet Worm Content Detection Using Deterministic Finite Automaton with Delayed Dictionary Compression

Directory of Open Access Journals (Sweden)

Divya Selvaraj

2014-01-01

Full Text Available Packet content scanning is one of the crucial threats to network security and network monitoring applications. In monitoring applications, payload of packets in a network is matched against the set of patterns in order to detect attacks like worms, viruses, and protocol definitions. During network transfer, incoming and outgoing packets are monitored in depth to inspect the packet payload. In this paper, the regular expressions that are basically string patterns are analyzed for packet payloads in detecting worms. Then the grouping scheme for regular expression matching is rewritten using Deterministic Finite Automaton (DFA. DFA achieves better processing speed during regular expression matching. DFA requires more memory space for each state. In order to reduce memory utilization, decompression technique is used. Delayed Dictionary Compression (DDC is applied for achieving better speeds in the communication links. DDC achieves decoding latency during compression of payload packets in the network. Experimental results show that the proposed approach provides better time consumption and memory utilization during detection of Internet worm attacks.

Parasitic worms: how many really?

Science.gov (United States)

Strona, Giovanni; Fattorini, Simone

2014-04-01

Accumulation curves are useful tools to estimate species diversity. Here we argue that they can also be used in the study of global parasite species richness. Although this basic idea is not completely new, our approach differs from the previous ones as it treats each host species as an independent sample. We show that randomly resampling host-parasite records from the existing databases makes it possible to empirically model the relationship between the number of investigated host species, and the corresponding number of parasite species retrieved from those hosts. This method was tested on 21 inclusive lists of parasitic worms occurring on vertebrate hosts. All of the obtained models conform well to a power law curve. These curves were then used to estimate global parasite species richness. Results obtained with the new method suggest that current predictions are likely to severely overestimate parasite diversity. Copyright © 2014 Australian Society for Parasitology Inc. Published by Elsevier Ltd. All rights reserved.

Synthesis of hierarchical worm-like SnO2@C aggregates and their enhanced lithium storage properties

International Nuclear Information System (INIS)

Wu, Zhen-Guo; Li, Jun-Tao; Zhong, Yan-Jun; Liu, Jie; Guo, Xiao-Dong; Huang, Ling; Zhong, Ben-He; Sun, Shi-Gang

2015-01-01

Highlights: • The hierarchical worm-like SnO 2 @C aggregates were synthesized. • The hierarchical worm-like SnO 2 @C unit is assembled by nanowires. • The cycling performances of SnO 2 @C aggregates are improved. • A capacity of 477.0 mA h g −1 at 400 mA g −1 could be obtained after 60 cycles. - Abstract: The present paper reports a synthetic strategy of hierarchical worm-like SnO 2 @C aggregates with enhanced electrochemical performances. Specifically, a glucose-assisted hydrothermal treatment of the intermediate Co–Sn alloy nanoparticles, which were formed by carbothermal reduction of mixed commercial SnO 2 and Co 3 O 4 nanoparticles. The SnO 2 @C sample exhibits enhanced cycling performance in comparison with raw commercial SnO 2 nanoparticles and intermediate Co–Sn alloy nanoparticles when used as anode of lithium ion battery. A stable capacity of 533.6 mA h g −1 at 100 mA g −1 and 477.0 mA h g −1 at 400 mA g −1 remains after 60 cycles. When the current density increases to 1600 mA g −1 , the SnO 2 @C sample still deliver a high capacity of 384.2 mA h g −1 . The superior electrochemical performances could be attributed to the synergistic effect of unique worm-like aggregates structure and carbon surface-layer, which facilitate the electron transportation and buffer the large volume change

Chemical Composition and Nutrient Digestibility of Super Worm Meal in Red Tilapia Juvenile

Directory of Open Access Journals (Sweden)

M. D. Abd Rahman Jabir*, S. A. Razak and S. Vikineswary

2012-10-01

Full Text Available The chemical composition and nutrient digestibility of super worm (Zophobas morio meal were determined for fish feed formulations. Experiments were conducted to compare super worm meal (SWM with fish meal (FM as main protein sources for fish diets. Super worm had lower protein content (42.83% compared to fish meal (52.64%. SWM contained high percentage (40.01% of lipids along with quality protein and this made it a suitable replacement for FM. SWM contained seventeen amino acids including the essential amino acids. All eight essential amino acids present were similar in values except for methionine which showed a large difference with 5.75 (mg/g crude protein and 21.17 (mg/g crude protein for SWM and FM respectively. SWM contained higher percentage of arginine and glutamic acid while the rest of the essential amino acids were lower than those present in FM. The fatty acid profile of SWM also showed a good polyunsaturated to saturated fatty acid ratio (0.87. Apparent digestibility coefficients (ADC of protein in SWM diet was lowest (50.53±6.08% and significantly different (P<0.05 from that of FM diet (77.48±0.53%. Lipid digestibility of SWM based diet was significantly lower (69.76±3.72% than that of FM value (91.51±0.21%. However, SWM-based diets fulfilled the requirements of fish recommended by FAO.

Phytoplankton reduction in near-bottom water caused by filter-feeding Nereis diversicolor - Implications for worm growth and population grazing impact

DEFF Research Database (Denmark)

Larsen, Poul Scheel; Riisgård, H. U.; Poulsen, L.

1996-01-01

reduced specific growth rate of worms at the sea floor (0.2 ± 1.1% d-1), compared to worms elevated just 10 cm above the sediment surface (2.5 ± 0.8% d-1), indicates that extremely meagre food conditions may be prevailing at the bottom. Experimental laboratory data on the development of vertical algal...

Urban pollution of sediments: Impact on the physiology and burrowing activity of tubificid worms and consequences on biogeochemical processes

Energy Technology Data Exchange (ETDEWEB)

Pigneret, M., E-mail: mathilde.pigneret@univ-lyon1.fr [LEHNA, UMR CNRS 5023, Ecologie des Hydrosystèmes Naturels et Anthropisés, Université de Lyon, Université Lyon 1, ENTPE, 6 rue Raphael Dubois, 69622 Villeurbanne (France); Mermillod-Blondin, F.; Volatier, L.; Romestaing, C. [LEHNA, UMR CNRS 5023, Ecologie des Hydrosystèmes Naturels et Anthropisés, Université de Lyon, Université Lyon 1, ENTPE, 6 rue Raphael Dubois, 69622 Villeurbanne (France); Maire, E.; Adrien, J. [MATEIS, UMR CNRS 5510, INSA de Lyon, 25 avenue Jean Capelle, 69621 Villeurbanne (France); Guillard, L.; Roussel, D.; Hervant, F. [LEHNA, UMR CNRS 5023, Ecologie des Hydrosystèmes Naturels et Anthropisés, Université de Lyon, Université Lyon 1, ENTPE, 6 rue Raphael Dubois, 69622 Villeurbanne (France)

2016-10-15

In urban areas, infiltration basins are designed to manage stormwater runoff from impervious surfaces and allow the settling of associated pollutants. The sedimentary layer deposited at the surface of these structures is highly organic and multicontaminated (mainly heavy metals and hydrocarbons). Only few aquatic species are able to maintain permanent populations in such an extreme environment, including the oligochaete Limnodrilus hoffmeisteri. Nevertheless, the impact of urban pollutants on these organisms and the resulting influence on infiltration basin functioning remain poorly studied. Thus, the aim of this study was to determine how polluted sediments could impact the survival, the physiology and the bioturbation activity of L. hoffmeisteri and thereby modify biogeochemical processes occurring at the water-sediment interface. To this end, we conducted laboratory incubations of worms, in polluted sediments from infiltration basins or slightly polluted sediments from a stream. Analyses were performed to evaluate physiological state and burrowing activity (X-ray micro-tomography) of worms and their influences on biogeochemical processes (nutrient fluxes, CO{sub 2} and CH{sub 4} degassing rates) during 30-day long experiments. Our results showed that worms exhibited physiological responses to cope with high pollution levels, including a strong ability to withstand the oxidative stress linked to contamination with heavy metals. We also showed that the presence of urban pollutants significantly increased the burrowing activity of L. hoffmeisteri, demonstrating the sensitivity and the relevance of such a behavioural response as biomarker of sediment toxicity. In addition, we showed that X-ray micro-tomography was an adequate technique for accurate and non-invasive three-dimensional investigations of biogenic structures formed by bioturbators. The presence of worms induced stimulations of nutrient fluxes and organic matter recycling (between + 100% and 200% of CO

Study on the effect of gamma-radiation on the development of silk worm (Bombyx mori L.)

International Nuclear Information System (INIS)

Grekov, D.

1995-01-01

These investigations are of special interest to the breeding practice considering the lack of profound research activity. The main purpose was to find out possibilities of using gamma-rays as a mutagenic factor in sericulture. The results obtained show that the irradiation of silk worm eggs at b 2 stage of embryo development with 5 Gy stimulates the biological development. The irradiation doses of 10-25 Gy inhibit mulberry silk worm development. The different species react in different way. Probably mutation forms are to be sought within 10-25 Gy doses. 10 refs., 3 tabs. (author)

Serial CT Findings of Paragonimus Infested Dogs and the Micro-CT Findings of the Worm Cysts

International Nuclear Information System (INIS)

Lee, Chang Hyun; Im, Jung Gi; Goo, Jin Mo; Lee, Hyun Ju; Hong, Sung Tae; Shen, Cheng Hua; Chung, Doo Hyun; Son, Kyu Ri; Chang, Jung Min; Eo, Hong

2007-01-01

To investigate the serial CT findings of Paragonimus westermani infected dogs and the microscopic structures of the worm cysts using Micro-CT. This study was approved by the committee on animal research at our institution. Fifteen dogs infected with P. westermani underwent serial contrast-enhanced CT scans at pre-infection, after 10 days of infection, and monthly thereafter until six months for determining the radiologic-pathologic correlation. Three dogs (one dog each time) were sacrificed at 1, 3 and 6 months, respectively. After fixation of the lungs, both multi-detector CT and Micro-CT were performed for examining the worm cysts. The initial findings were pleural effusion and/or subpleural groundglass opacities or linear opacities at day 10. At day 30, subpleural and peribronchial nodules appeared with hydropneumothorax and abdominal or chest wall air bubbles. Cavitary change and bronchial dilatation began to be seen on CT scan at day 30 and this was mostly seen together with mediastinal lymphadenopathy at day 60. Thereafter, subpleural ground-glass opacities and nodules with or without cavitary changes were persistently observed until day 180. After cavitary change of the nodules, the migratory features of the subpleural or peribronchial nodules were seen on all the serial CT scans. Micro-CT showed that the cyst wall contained dilated interconnected tubular structures, which had communications with the cavity and the adjacent distal bronchus. The CT findings of paragonimiasis depend on the migratory stage of the worms. The worm cyst can have numerous interconnected tubular channels within its own wall and these channels have connections with the cavity and the adjacent distal bronchus

21 CFR 868.5800 - Tracheostomy tube and tube cuff.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Tracheostomy tube and tube cuff. 868.5800 Section... (CONTINUED) MEDICAL DEVICES ANESTHESIOLOGY DEVICES Therapeutic Devices § 868.5800 Tracheostomy tube and tube cuff. (a) Identification. A tracheostomy tube and tube cuff is a device intended to be placed into a...

[Parasitologic significance of the alteration of the causative Anisakidae worm and of the Pseudoterranova decipiens female immature adult worm, casting off the cuticles, and excreted from human in Kanazawa City].

Science.gov (United States)

Ishikura, H; Kikuchi, K; Akao, N; Doutei, M; Yagi, K; Takahashi, S; Sato, N

1995-09-01

We have been studying Anisakidae larvae, their intermediate hosts and their final hosts in the northern Japan Sea area. These larvae cause anisakidosis. According to the investigation, the recent burst of pseudoterranovosis in this area can be attributed to the increased presence of sea lions, which proliferate in the Arctic region, then migrate to the northern Japan Sea and eat the intermediate host fish. In a stomach of a male sea lion that was captured in February 1995, we found more than 4,500 Pseudoterranova decipiens. Although there is no known circumstance in which a human would consume an adult worm of Anisakis nematode, an astonishing case of this was found in Kanazawa; a female young adult Pseudoterranova decipiens undergoing the final metamorphosis was emitted from a patient. This indicates that the Anisakis larva can mature into the adult worm in humans. It is postulated that the Pseudoterranova decipiens larva is in the process of adapting to use humans as the final host.

Tube plug

International Nuclear Information System (INIS)

Zafred, P. R.

1985-01-01

The tube plug comprises a one piece mechanical plug having one open end and one closed end which is capable of being inserted in a heat exchange tube and internally expanded into contact with the inside surface of the heat exchange tube for preventing flow of a coolant through the heat exchange tube. The tube plug also comprises a groove extending around the outside circumference thereof which has an elastomeric material disposed in the groove for enhancing the seal between the tube plug and the tube

Ultrasonic inspection of tube to tube plate welds

International Nuclear Information System (INIS)

Telford, D.W.; Peat, T.S.

1985-01-01

To monitor the deterioration of a weld between a tube and tube plate which has been repaired by a repair sleeve inside the tube and brazed at one end to the tube, ultrasound from a crystal at the end of a rod is launched, in the form of Lamb-type waves, into the tube through the braze and allowed to travel along the tube to the weld and be reflected back along the tube. The technique may also be used for the type of heat exchanger in which, during construction, the tubes are welded to the tube plate via external sleeves in which case the ultrasound is used in a similar manner to inspect the sleeve/tube plate weld. an electromagnetic transducer may be used to generate the ultrasound. The ultrasonic head comprising the crystal and an acoustic baffle is mounted on a Perspex (RTM) rod which may be rotated by a stepping motor. Echo signals from the region of deterioration may be isolated by use of a time gate in the receiver. The device primarily detects circumferentially orientated cracks, and may be used in heat exchangers in nuclear power plants. (author)

Mass rearing the Old World screw-worm fly, Chrysomya bezziana

International Nuclear Information System (INIS)

Mahon, R.J.; Hamdan bin Ahmad

2000-01-01

Many countries within the tropics are afflicted with one of two species of screw-worm, either the New World screw-worm fly Cochliomyia hominivorax Coquerel (NWSWF), or the Old World screw-worm fly, Chrysomya bezziana Villenuve (OWSWF). In nature, larvae of both species are obligate parasites and feed on the living flesh of mammals and to a lesser extent, birds. Female flies lay eggs at the site of a pre-existing wound or near body orifices of the host. First instar larvae feed superficially on the wound; however, larger larvae use their hooked mouthparts to burrow deep into the flesh of the host. Damaged blood vessels provide a steady stream of blood and plasma that typically oozes from the infested wound. The wound also acquires a characteristic odour. Presumably, some of the volatile components emanating from the wound, also provide strong signals to gravid female flies, as once infested, wounds become far more attractive as a site to lay eggs than uninfested wounds. As the number of larvae increases, the myiasis enlarges and the well-being of the host is threatened. In areas where gravid female SWF are numerous, the wound has little chance to heal, thus death of the host is likely unless the wound is treated and re-infestation prevented. While New and Old World species are distantly related, they are remarkably similar ecologically and in their biological characteristics. Wherever either species occurs, it is considered a serious pest of livestock. Australia is fortunate that neither species of the screw-worm is present despite evidence that extensive areas appear environmentally suitable. The OWSWF is considered the most serious threat to Australia as it is present in the neighbouring countries of Papua New Guinea and Indonesia. It is envisaged that the sterile insect release method (SIRM) will be employed to eradicate the OWSWF if it becomes established in Australia. To facilitate such a programme, and to reduce delays in constructing a suitable mass rearing

The hatching larva of the priapulid worm Halicryptus spinulosus.

Science.gov (United States)

Janssen, Ralf; Wennberg, Sofia A; Budd, Graham E

2009-05-26

Despite their increasing evolutionary importance, basic knowledge about the priapulid worms remains limited. In particular, priapulid development has only been partially documented. Following previous description of hatching and the earliest larval stages of Priapulus caudatus, we here describe the hatching larva of Halicryptus spinulosus. Comparison of the P. caudatus and the H. spinulosus hatching larvae allows us to attempt to reconstruct the ground pattern of priapulid development. These findings may further help unravelling the phylogenetic position of the Priapulida within the Scalidophora and hence contribute to the elucidation of the nature of the ecdysozoan ancestor.

WormScan: a technique for high-throughput phenotypic analysis of Caenorhabditis elegans.

Directory of Open Access Journals (Sweden)

Mark D Mathew

Full Text Available BACKGROUND: There are four main phenotypes that are assessed in whole organism studies of Caenorhabditis elegans; mortality, movement, fecundity and size. Procedures have been developed that focus on the digital analysis of some, but not all of these phenotypes and may be limited by expense and limited throughput. We have developed WormScan, an automated image acquisition system that allows quantitative analysis of each of these four phenotypes on standard NGM plates seeded with E. coli. This system is very easy to implement and has the capacity to be used in high-throughput analysis. METHODOLOGY/PRINCIPAL FINDINGS: Our system employs a readily available consumer grade flatbed scanner. The method uses light stimulus from the scanner rather than physical stimulus to induce movement. With two sequential scans it is possible to quantify the induced phototactic response. To demonstrate the utility of the method, we measured the phenotypic response of C. elegans to phosphine gas exposure. We found that stimulation of movement by the light of the scanner was equivalent to physical stimulation for the determination of mortality. WormScan also provided a quantitative assessment of health for the survivors. Habituation from light stimulation of continuous scans was similar to habituation caused by physical stimulus. CONCLUSIONS/SIGNIFICANCE: There are existing systems for the automated phenotypic data collection of C. elegans. The specific advantages of our method over existing systems are high-throughput assessment of a greater range of phenotypic endpoints including determination of mortality and quantification of the mobility of survivors. Our system is also inexpensive and very easy to implement. Even though we have focused on demonstrating the usefulness of WormScan in toxicology, it can be used in a wide range of additional C. elegans studies including lifespan determination, development, pathology and behavior. Moreover, we have even adapted the

Heat Exchanger Tube to Tube Sheet Joints Corrosion Behavior

Directory of Open Access Journals (Sweden)

M. Iancu

2013-03-01

Full Text Available Paper presents the studies made by the authors above the tube to tube sheet fittings of heat exchanger with fixed covers from hydrofining oil reforming unit. Tube fittings are critical zones for heat exchangers failures. On a device made from material tube and tube sheet at real joints dimensions were establish axial compression force and traction force at which tube is extracted from expanded joint. Were used two shapes joints with two types of fittings surfaces, one with smooth hole of tube sheet and other in which on boring surface we made a groove. From extracted expanded tube zones were made samples for corrosion tests in order to establish the corrosion rate, corrosion potential and corrosion current in working mediums such as hydrofining oil and industrial water at different temperatures. The corrosion rate values and the temperature influence are important to evaluate joints durability and also the results obtained shows that the boring tube sheet shape with a groove on hole tube shape presents a better corrosion behavior then the shape with smooth hole tube sheet.

Microplastic ingestion decreases energy reserves in marine worms.

Science.gov (United States)

Wright, Stephanie L; Rowe, Darren; Thompson, Richard C; Galloway, Tamara S

2013-12-02

The indiscriminate disposal of plastic to the environment is of concern. Microscopic plastic litter (environment, originating from the fragmentation of plastic items and from industry and personal-care products [1]. On highly impacted beaches, microplastic concentrations (impacts remain understudied [1]. Here, we show that deposit-feeding marine worms maintained in sediments spiked with microscopic unplasticised polyvinylchloride (UPVC) at concentrations overlapping those in the environment had significantly depleted energy reserves by up to 50% (Figure 1). Our results suggest that depleted energy reserves arise from a combination of reduced feeding activity, longer gut residence times of ingested material and inflammation. Copyright © 2013 Elsevier Ltd. All rights reserved.

Insurance against an Old World screw-worm fly invasion of Australia

International Nuclear Information System (INIS)

Tweddle, Neil; Mahon, Rod J.

2000-01-01

Australia is fortunate that neither the New World screw-worm fly Cochliomyia hominivorax (Coquerel) (NWSWF) nor the Old World screw-worm fly, Chrysomya bezziana Villeneuve (OWSWF), have become established within our country, although much of the northern areas are environmentally suitable (Suthurst et al. 1989). The OWSWF is a substantial threat as it is prevalent in the neighbouring countries of Papua New Guinea and Indonesia. Perhaps more importantly, it is also present in many of our trading partners in Southeast Asia. The export of live cattle from northern Australian ports to Southeast Asian nations has become an important and rapidly expanding trade. The fly is also present near ports in the Middle East which receive considerable numbers of live sheep exported from various Australian ports. In both situations, there is the ever-present opportunity for the screw-worm fly (SWF) to return to Australia as larvae, pupae or adults on stock carrying vessels. While this means of transport probably represents the most likely route for the pest to gain access to Australia, accidental transport on aircraft and active myiases on humans or companion animals remain possibilities. The introduction of the NWSWF into Australia is considered unlikely, but not impossible. Indeed, in 1992, an Australian tourist returning from South America carried live NWSWF larvae into Australia in a neck wound. Fortunately, the diagnosis was made early and the wound was treated, preventing any larvae evacuating. This was in southern Australia in May, where climatic conditions are unlikely to favour survival at that time of the year, but it demonstrates the potential for inadvertent introduction. Models of the impact of the OWSWF indicate that the cost of an invasion would be high. It has been estimated by Anaman et al. (1993), that the annual cost in an average climate year to beef cattle, sheep and dairy producers of an endemic establishment would be A$281 million. These costs would be

Valorisation of waste streams from by-product to worm biomass

OpenAIRE

Laarhoven, Bob

2017-01-01

There is a global demand for more feed resources to keep up with the increasing production of livestock. The hunger for resources is most urgent in the aquaculture sector, which to a large degree depends on the non-sustainable use of fish oil/ meal from wild fish. Aquatic macro invertebrates such as the freshwater worm Lumbriculus variegatus (Oligochaeta, Lumbriculidae, common name blackworms, further abbreviated as Lv) are rich in proteins, lipids, vitamins and minerals. When cultivated on s...

Giant kidney worms in a patient with renal cell carcinoma

OpenAIRE

Kuehn, Jemima; Lombardo, Lindsay; Janda, William M; Hollowell, Courtney M P

2016-01-01

Dioctophyma renale (D. renale), or giant kidney worms, are the largest nematodes that infect mammals. Approximately 20 cases of human infection have been reported. We present a case of a 71-year-old man with a recent history of unintentional weight loss and painless haematuria, passing elongated erythematous tissue via his urethra. CT revealed a left renal mass with pulmonary nodules and hepatic lesions. On microscopy, the erythematous tissue passed was identified as D. renale. On subsequent ...

Parasiticidal and brine shrimp cytotoxicity potential of crude methanolic extract of rind of Punica granatum Linn against round worms and tape worms.

Science.gov (United States)

Ali, Niaz; Jamil, Ayesha; Shah, Syed Wadood Ali; Shah, Ismail; Ahmed, Ghayour; Junaid, Muhammad; Ahmed, Zahoor

2015-05-01

Rind of Punica granatum is traditionally used for anthelmintic purposes. The current work describes the possible anthelmintic activity of crude methanolic extract of Punica granatum (Pg. Cr) against round worms (Ascaridia galli) and the tape worms (Raillietina spiralis). Brine shrimp cytotoxicity is also performed. Brine shrimp cytotoxic activity was tested using different concentrations (1000 μg/mL, 100 μg/mL and 10 μg/mL) of Pg.Cr. In vitro anthelmintic activity of Pg. Cr was determined against the parasites using albendazole and piperazine citrate as standard anthelmintic drugs in concentration 10 mg/ml. LC50 value for Brine shrimp cytotoxicity was 189.44 ±28 μg/mL. In test concentration of 40mg/ml of the Pg. Cr, Raillietina spiralis was paralyzed in 23 minutes. However, for parasiticidal activity (death of the parasite), it took less time (40 minutes) as compared to standard Albendazole. Time taken for death of the parasite Raillietina spiralis, in concentration 40 mg /ml, is 40 min. While standard drugs took more time to kill the Raillietina spiralis. Pg. Cr took 19 minutes to paralyze the Ascaridia galli at concentration 40 mg/ml whereas; it took 48 minutes for to kill the parasite Ascaridia galli. The current work confirms the traditional use of rind of Punica granatum as anthelmintic against Raillietina spiralis and Ascaridia galli. Results of brine shrimp cytotoxicity assay warrant for the isolation of cytotoxic compounds. List of abbreviation- Pg. Cr = Crude methanolic extract of Punica granatum.

Microbial stability of worm castings and sugarcane filter mud compost blended with biochar

Science.gov (United States)

Organic amendments such as worm castings and filter mud compost can provide nutrient rich substrates for enhanced plant growth. Physico-chemical and microbial stability of these substrates might be enhanced with the addition of biochar. A series of experiments was carried out to determine the stab...

Tube spacer grid for a heat-exchanger tube bundle

International Nuclear Information System (INIS)

Scheidl, H.

1976-01-01

A tube spacer grid for a heat-exchanger tube bundle is formed by an annular grid frame having a groove formed in its inner surface in which the interspaced grid bars have their ends positioned and held in interspaced relationship by short sections of tubes passed through holes axially formed in the grid frame so that the tubes are positioned between the ends of the grid bars in the grooves. The tube sections may be cut from the same tubes used to form the tube bundle. 5 claims, 3 drawing figures

Effects of estradiol on worm burden and peripheral leukocytes in Parastrongylus malaysiensis-infected rats.

Science.gov (United States)

Kamis, A B; Ahmad, R A; Badrul-Munir, M Z

1994-01-01

Gonadectomized male laboratory rats were given 0.06 mg/kg estradiol benzoate daily for 14 days before being inoculated with 50 third-stage larvae of Parastrongylus malaysiensis. Hormone treatment was continued until the rats were killed. The numbers of larvae in the brain and of adult worms in the pulmonary area of the rats were determined every 7 days after the inoculation. It was found that the rats treated daily with estradiol benzoate had significantly and consistently higher numbers of larvae and adult worms as compared with the controls. The number of total leukocytes increased significantly after the rats were infected. The results show that estradiol-treated rats become susceptible to P. malaysiensis infection, which may indicate that the immunosuppressive effects of testosterone observed in earlier studies may partly be caused by estradiol that was peripherally aromatized from testosterone.

Dot-blot immunoassay of Fasciola gigantica infection using 27 kDa and adult worm regurge antigens in Egyptian patients.

Science.gov (United States)

Kamel, Hanan H; Saad, Ghada A; Sarhan, Rania M

2013-04-01

The purpose of the present study was to evaluate the potential role of the 27-Kilodalton (KDa) antigen versus Fasciola gigantica adult worm regurge antigens in a DOT-Blot assay and to assess this assay as a practical tool for diagnosis fascioliasis in Egyptian patients. Fasciola gigantica antigen of an approximate molecular mass 27-(KDa) was obtained from adult worms by a simple elution SDS-PAGE. A Dot-Blot was developed comparatively to adult worm regurge antigens for the detection of specific antibodies from patients infected with F. gigantica in Egypt. Control sera were obtained from patients with other parasitic infections and healthy volunteers to assess the test and compare between the antigens. The sensitivity, specificity, positive and negative predictive values of Dot-Blot using the adult worm regurge were 80%, 90%, 94.1%, and 69.2% respectively, while those using 27-KDa were 100% which confirms the diagnostic potential of this antigen. All patients infected with Fasciola were positive, with cross reactivity reported with Schistosoma mansoni serum samples. This 27-KDa Dot-Blot assay showed to be a promising test which can be used for serodiagnosis of fascioliasis in Egyptian patients especially, those presenting with hepatic disease. It is specific, sensitive and easy to perform method for the rapid diagnosis particularly when more complex laboratory tests are unavailable.

Temporal variation and lack of host specificity among bacterial endosymbionts of Osedax bone worms (Polychaeta: Siboglinidae

Directory of Open Access Journals (Sweden)

Salathé Rahel M

2012-09-01

Full Text Available Abstract Background Osedax worms use a proliferative root system to extract nutrients from the bones of sunken vertebrate carcasses. The roots contain bacterial endosymbionts that contribute to the nutrition of these mouthless and gutless worms. The worms acquire these essential endosymbionts locally from the environment in which their larvae settle. Here we report on the temporal dynamics of endosymbiont diversity hosted by nine Osedax species sampled during a three-year investigation of an experimental whale fall at 1820-m depth in the Monterey Bay, California. The host species were identified by their unique mitochondrial COI haplotypes. The endosymbionts were identified by ribotyping with PCR primers specifically designed to target Oceanospirillales. Results Thirty-two endosymbiont ribotypes associated with these worms clustered into two distinct bacterial ribospecies that together comprise a monophyletic group, mostly restricted to deep waters (>1000 m. Statistical analyses confirmed significant changes in the relative abundances of host species and the two dominant endosymbiont ribospecies during the three-year sampling period. Bone type (whale vs. cow also had a significant effect on host species, but not on the two dominant symbiont ribospecies. No statistically significant association existed between the host species and endosymbiont ribospecies. Conclusions Standard PCR and direct sequencing proved to be an efficient method for ribotyping the numerically dominant endosymbiont strains infecting a large sample of host individuals; however, this method did not adequately represent the frequency of mixed infections, which appears to be the rule rather than an exception for Osedax individuals. Through cloning and the use of experimental dilution series, we determined that minority ribotypes constituting less than 30% of a mixture would not likely be detected, leading to underestimates of the frequency of multiple infections in host

Temporal variation and lack of host specificity among bacterial endosymbionts of Osedax bone worms (Polychaeta: Siboglinidae)

Science.gov (United States)

2012-01-01

Background Osedax worms use a proliferative root system to extract nutrients from the bones of sunken vertebrate carcasses. The roots contain bacterial endosymbionts that contribute to the nutrition of these mouthless and gutless worms. The worms acquire these essential endosymbionts locally from the environment in which their larvae settle. Here we report on the temporal dynamics of endosymbiont diversity hosted by nine Osedax species sampled during a three-year investigation of an experimental whale fall at 1820-m depth in the Monterey Bay, California. The host species were identified by their unique mitochondrial COI haplotypes. The endosymbionts were identified by ribotyping with PCR primers specifically designed to target Oceanospirillales. Results Thirty-two endosymbiont ribotypes associated with these worms clustered into two distinct bacterial ribospecies that together comprise a monophyletic group, mostly restricted to deep waters (>1000 m). Statistical analyses confirmed significant changes in the relative abundances of host species and the two dominant endosymbiont ribospecies during the three-year sampling period. Bone type (whale vs. cow) also had a significant effect on host species, but not on the two dominant symbiont ribospecies. No statistically significant association existed between the host species and endosymbiont ribospecies. Conclusions Standard PCR and direct sequencing proved to be an efficient method for ribotyping the numerically dominant endosymbiont strains infecting a large sample of host individuals; however, this method did not adequately represent the frequency of mixed infections, which appears to be the rule rather than an exception for Osedax individuals. Through cloning and the use of experimental dilution series, we determined that minority ribotypes constituting less than 30% of a mixture would not likely be detected, leading to underestimates of the frequency of multiple infections in host individuals. PMID:23006795

Transcriptomic and proteomic insights into innate immunity and adaptations to a symbiotic lifestyle in the gutless marine worm Olavius algarvensis.

Science.gov (United States)

Wippler, Juliane; Kleiner, Manuel; Lott, Christian; Gruhl, Alexander; Abraham, Paul E; Giannone, Richard J; Young, Jacque C; Hettich, Robert L; Dubilier, Nicole

2016-11-21

The gutless marine worm Olavius algarvensis has a completely reduced digestive and excretory system, and lives in an obligate nutritional symbiosis with bacterial symbionts. While considerable knowledge has been gained of the symbionts, the host has remained largely unstudied. Here, we generated transcriptomes and proteomes of O. algarvensis to better understand how this annelid worm gains nutrition from its symbionts, how it adapted physiologically to a symbiotic lifestyle, and how its innate immune system recognizes and responds to its symbiotic microbiota. Key adaptations to the symbiosis include (i) the expression of gut-specific digestive enzymes despite the absence of a gut, most likely for the digestion of symbionts in the host's epidermal cells; (ii) a modified hemoglobin that may bind hydrogen sulfide produced by two of the worm's symbionts; and (iii) the expression of a very abundant protein for oxygen storage, hemerythrin, that could provide oxygen to the symbionts and the host under anoxic conditions. Additionally, we identified a large repertoire of proteins involved in interactions between the worm's innate immune system and its symbiotic microbiota, such as peptidoglycan recognition proteins, lectins, fibrinogen-related proteins, Toll and scavenger receptors, and antimicrobial proteins. We show how this worm, over the course of evolutionary time, has modified widely-used proteins and changed their expression patterns in adaptation to its symbiotic lifestyle and describe expressed components of the innate immune system in a marine oligochaete. Our results provide further support for the recent realization that animals have evolved within the context of their associations with microbes and that their adaptive responses to symbiotic microbiota have led to biological innovations.

Annual Survey of Horsehair Worm Cysts in Northern Taiwan, with Notes on a Single Seasonal Infection Peak in Chironomid Larvae (Diptera: Chironomidae).

Science.gov (United States)

Chiu, Ming-Chung; Huang, Chin-Gi; Wu, Wen-Jer; Shiao, Shiuh-Feng

2016-06-01

The life cycle of the freshwater horsehair worm typically includes a free-living phase (adult, egg, larva) and a multiple-host parasitic phase (aquatic paratenic host, terrestrial definitive host). Such a life cycle involving water and land can improve energy flow in riparian ecosystems; however, its temporal dynamics in nature have rarely been investigated. This study examined seasonal infection with cysts in larval Chironominae (Diptera: Chironomidae) in northern Taiwan. In the larval chironomids, cysts of 3 horsehair worm species were identified. The cysts of the dominant species were morphologically similar to those of Chordodes formosanus. Infection with these cysts increased suddenly and peaked 2 mo after the reproductive season of the adult horsehair worms. Although adult C. formosanus emerged several times in a year, only 1 distinct infection peak was detected in September in the chironomid larvae. Compared with the subfamily Chironominae, samples from the subfamilies Tanypodinae and Orthocladiinae were less parasitized. This indicates that the feeding behavior of the chironomid host likely affects horsehair worm cyst infections; however, bioconcentration in predatory chironomids was not detected.

Bar-tailed Godwits Limosa l. lapponica eat polychaete worms wherever they winter in Europe

NARCIS (Netherlands)

Duijns, Sjoerd; Hidayati, Nur Annis; Piersma, Theunis

2013-01-01

Capsule: Across the European wintering range Bar-tailed Godwits Limosa lapponica lapponica selected polychaete worms and especially Ragworms Hediste diversicolor, with differences between areas due to variations in prey availability. Aims: To determine the diet of Bar-tailed Godwits across their

Animal-sediment interactions: the effect of ingestion and excretion by worms on mineralogy

Directory of Open Access Journals (Sweden)

S. J. Needham

2004-01-01

Full Text Available By controlled experiments that simulate marine depositional environments, it is shown that accelerated weathering and clay mineral authigenesis occur during the combined process of ingestion, digestion and excretion of fine-grained sediment by two species of annelid worms. Previously characterized synthetic mud was created using finely ground, low-grade metamorphic slate (temperature approximately 300°C containing highly crystalline chlorite and muscovite. This was added to experiment and control tanks along with clean, wind-blown sand. Faecal casts were collected at regular intervals from the experimental tanks and, less frequently, from the control tanks. Over a period of many months the synthetic mud (slate proved to be unchanged in the control tanks, but was significantly different in faecal casts from the experimental tanks that contained the worms Arenicola marina and Lumbricus terrestris. Chlorite was preferentially destroyed during digestion in the gut of A. marina. Both chlorite and muscovite underwent XRD peak broadening with a skew developing towards higher lattice spacing, characteristic of smectite formation. A neoformed Fe-Mg-rich clay mineral (possibly berthierine and as-yet undefined clay minerals with very high d-spacing were detected in both A. marina and L. terrestris cast samples. We postulate that a combination of the low pH and bacteria-rich microenvironment in the guts of annelid worms may radically accelerate mineral dissolution and clay mineral precipitation processes during digestion. These results show that macrobiotic activity significantly accelerates weathering and mineral degradation as well as mineral authigenesis. The combined processes of sediment ingestion and digestion thus lead to early diagenetic growth of clay minerals in clastic sediments.

Heavy metal concentrations in water, sediments and body tissues of red worm (Tubifex spp.) collected from natural habitats in Mumbai, India.

Science.gov (United States)

Singh, Ravendra Kumar; Chavan, Sugandha L; Sapkale, Pravin H

2007-06-01

Live feeds, especially Tubifex spp., which are collected from a wide variety of polluted habitats, are used by aquarium fish keepers in India. These habitats receive domestic sewage and industrial wastes from nearby residential and industrial areas. Reports of morbidity and mortality from aquarium fish culturists in and around Mumbai led to the present investigations on the ecology of these habitats with a view to assess the water quality, presence of heavy metals in the environment and their bioaccumulation in Tubifex worms, and to examine whether these habitats could be exploited to meet the demand of the industry. Six natural red worm (Tubifex spp.) collection centres in Mumbai and Thane districts of Maharashtra state in India constituting a major source of live Tubifex supply to aquarium fish industry were evaluated for pollution, heavy metal concentration in water, sediments and in the body tissues of Tubifex. Data revealed the presence of heavy metals in water and sediments at collection sites and bioaccumulation of cadmium, iron, lead, zinc and copper in body tissues of Tubifex worms. Cadmium ranged from 2.38 to 7.21 mg/kg, iron 671.9 to 5738 mg/kg, lead 14.95 to 33.49 mg/kg, zinc 60.20 to 166.60 mg/kg and copper 29.38 to 108.90 mg/kg of dry Tubifex worms. The study suggests that all the six collection sites are polluted and the red worms contaminated with heavy metals and hence, unfit for use in aquaria or feeding any variety of fish or crustaceans in the hatcheries.

Synthesis of hierarchical worm-like SnO{sub 2}@C aggregates and their enhanced lithium storage properties

Energy Technology Data Exchange (ETDEWEB)

Wu, Zhen-Guo [School of Chemical Engineering, SichuanUniversity, Chengdu 610065 (China); College of Energy, Xiamen University, Xiamen 361005 (China); Li, Jun-Tao, E-mail: jtli@xmu.edu.cn [College of Energy, Xiamen University, Xiamen 361005 (China); Zhong, Yan-Jun [School of Chemical Engineering, SichuanUniversity, Chengdu 610065 (China); College of Energy, Xiamen University, Xiamen 361005 (China); Liu, Jie [State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Guo, Xiao-Dong, E-mail: xiaodong2009@163.com [School of Chemical Engineering, SichuanUniversity, Chengdu 610065 (China); Huang, Ling [State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Zhong, Ben-He [School of Chemical Engineering, SichuanUniversity, Chengdu 610065 (China); Sun, Shi-Gang [College of Energy, Xiamen University, Xiamen 361005 (China); State Key Laboratory of Physical Chemistry of Solid Surfaces, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China)

2015-01-25

Highlights: • The hierarchical worm-like SnO{sub 2}@C aggregates were synthesized. • The hierarchical worm-like SnO{sub 2}@C unit is assembled by nanowires. • The cycling performances of SnO{sub 2}@C aggregates are improved. • A capacity of 477.0 mA h g{sup −1} at 400 mA g{sup −1} could be obtained after 60 cycles. - Abstract: The present paper reports a synthetic strategy of hierarchical worm-like SnO{sub 2}@C aggregates with enhanced electrochemical performances. Specifically, a glucose-assisted hydrothermal treatment of the intermediate Co–Sn alloy nanoparticles, which were formed by carbothermal reduction of mixed commercial SnO{sub 2} and Co{sub 3}O{sub 4} nanoparticles. The SnO{sub 2}@C sample exhibits enhanced cycling performance in comparison with raw commercial SnO{sub 2} nanoparticles and intermediate Co–Sn alloy nanoparticles when used as anode of lithium ion battery. A stable capacity of 533.6 mA h g{sup −1} at 100 mA g{sup −1} and 477.0 mA h g{sup −1} at 400 mA g{sup −1} remains after 60 cycles. When the current density increases to 1600 mA g{sup −1}, the SnO{sub 2}@C sample still deliver a high capacity of 384.2 mA h g{sup −1}. The superior electrochemical performances could be attributed to the synergistic effect of unique worm-like aggregates structure and carbon surface-layer, which facilitate the electron transportation and buffer the large volume change.

Rearing and estimation of life-cycle parameters of the tubicifid worm Branchiura sowerbyi: application to ecotoxicity testing.

Science.gov (United States)

Ducrot, Virginie; Péry, Alexandre R R; Quéau, Hervé; Mons, Raphaël; Lafont, Michel; Garric, Jeanne

2007-10-01

This paper provides original collection, acclimatizing, rearing and toxicity test methods for the freshwater worm Branchiura sowerbyi, an alternative species to Tubifex tubifex for ecotoxicity evaluation of sediments. Influence of the substrate, type of food, and feeding level on individual performances was assessed in short-term tests, in order to set up optimal culture and test conditions. Low-size particles and high organic matter content favoured the growth and reproduction of B. sowerbyi. The relative contribution of sediments and fish food to the individual food intake was assessed using a foraging efficiency model based upon the dynamic energy budget theory. Individual performances were optimal when the substrate plus fish food provided the energy equivalent to 5 mg Tetramin per worm per day, which is the ad libitum food level for adults at 21 degrees C. The life-cycle of the worm was fully characterized using a life-cycle test conducted under the previously defined optimal conditions. Hatching rates were low (32%), whereas newborn and juveniles exhibited high survival (>80%) and growth (2.4 mg/day in juveniles) rates. Age at puberty was low (60 days) when compared to the maximal life span (1100 days) as predicted using a Weibull model. Adults reproduced every other month with a constant fecundity (0.16 cocoon/worm/day). The mean values of the life-cycle parameters and their variability and reproducibility among laboratory studies were discussed in order to identify relevant endpoints to be used in ecotoxicity tests. Survival, juvenile growth, and fecundity may constitute suitable test endpoints, whereas hatching rate and adult growth should not be used as endpoints in B. sowerbyi.

An analysis on the re-emergence of SQL Slammer worm using network telescope data

CSIR Research Space (South Africa)

Chindipha, SD

2017-09-01

Full Text Available The SQL Slammer worm is a self propagated computer virus that caused a denial of service on some Internet hosts and dramatically slowed down general Internet traffic. An observation of network traffic captured in the Rhodes University’s network...

Parasitic Worm in Tiger (Panthera tigris at Serulingmas Zoological Garden Banjarnegara, Bandung Zoological Garden, and Indonesia Safari Park Bogor

Directory of Open Access Journals (Sweden)

Risa Tiuria

2017-04-01

Full Text Available This research was done to infestigate the existence and the type of parasitic worms from feces of tiger (Panthera tigris at Serulingmas Zoological Garden (TRMS at Banjarnegara, Central Java , Bandung Zoological Garden (KBB, and Indonesia Safari Park Bogor (TSI. Total of 35 tigers feces samples were examined. They are taken from 4 Bengal tigers at Serulingmas Zoological Garden, 12 tigers (8 Bengal tigers and 4 Sumatran tigers at Bandung Zoological Garden, and 19 tigers (4 Bengal tigers and 15 Sumatran tigers at Indonesia Safari Park Bogor. All of the feces samples were examined with qualitative (flotation and sedimentation and quantitative (McMaster slide method to know the existence of parasitic worm eggs. Moreover, a tiger feces that contain eggs of strongylid were cultured. Parasitic worms that were found in tigers from the research were ascarid (Toxocara sp, Toxascaris sp, strongylid (Trichostrongylus sp, Ancylostoma sp, Cooperia sp, , oxyurid (Oxyuris sp and Strongyloides sp. The result showed that prevalence index of parasitic worms in tigers at TRMS, KBB, and TSI were 100%, 50%, and 47,4%, respectively. Parasitic worms at TRMS were ascarid (Toxocara sp, strongylid (Ancylostoma sp, Trichostrongylus sp, Cooperia sp and Strongyloides sp. Parasitic worms at KBB were ascarid (Toxocara sp, Toxascaris sp, strongylid (Ancylostoma sp, Trichostrongylus sp, dan oxyurid (Oxyuris sp. Parasitic worms at TSI were ascarid (Toxocara sp, Toxascaris sp, strongylid (Ancylostoma sp, and oxyurid (Oxyuris sp. ABSTRAK Penelitian ini dilakukan untuk mengetahui jenis cacing parasitik pada harimau (Panthera tigris di Taman Rekreasi Margasatwa Serulingmas (TRMS Banjarnegara Jawa Tengah, Kebun Binatang Bandung (KBB, dan Taman Safari Indonesia (TSI Bogor. Sebanyak 35 sampel tinja harimau dari tiga lembaga konservasi eks-situ, yaitu 4 ekor harimau Benggala dari TRMS, 12 ekor (4 ekor harimau Benggala dan 8 ekor harimau Sumatera dari KBB, dan 19 ekor (4 ekor harimau

Biogeography of worm lizards (Amphisbaenia) driven by end-Cretaceous mass extinction.

Science.gov (United States)

Longrich, Nicholas R; Vinther, Jakob; Pyron, R Alexander; Pisani, Davide; Gauthier, Jacques A

2015-05-07

Worm lizards (Amphisbaenia) are burrowing squamates that live as subterranean predators. Their underground existence should limit dispersal, yet they are widespread throughout the Americas, Europe and Africa. This pattern was traditionally explained by continental drift, but molecular clocks suggest a Cenozoic diversification, long after the break-up of Pangaea, implying dispersal. Here, we describe primitive amphisbaenians from the North American Palaeocene, including the oldest known amphisbaenian, and provide new and older molecular divergence estimates for the clade, showing that worm lizards originated in North America, then radiated and dispersed in the Palaeogene following the Cretaceous-Palaeogene (K-Pg) extinction. This scenario implies at least three trans-oceanic dispersals: from North America to Europe, from North America to Africa and from Africa to South America. Amphisbaenians provide a striking case study in biogeography, suggesting that the role of continental drift in biogeography may be overstated. Instead, these patterns support Darwin and Wallace's hypothesis that the geographical ranges of modern clades result from dispersal, including oceanic rafting. Mass extinctions may facilitate dispersal events by eliminating competitors and predators that would otherwise hinder establishment of dispersing populations, removing biotic barriers to dispersal. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

The hatching larva of the priapulid worm Halicryptus spinulosus

Directory of Open Access Journals (Sweden)

Budd Graham E

2009-05-01

Full Text Available Abstract Despite their increasing evolutionary importance, basic knowledge about the priapulid worms remains limited. In particular, priapulid development has only been partially documented. Following previous description of hatching and the earliest larval stages of Priapulus caudatus, we here describe the hatching larva of Halicryptus spinulosus. Comparison of the P. caudatus and the H. spinulosus hatching larvae allows us to attempt to reconstruct the ground pattern of priapulid development. These findings may further help unravelling the phylogenetic position of the Priapulida within the Scalidophora and hence contribute to the elucidation of the nature of the ecdysozoan ancestor.

The effects of chronic radiation on reproductive success of the polychaete worm Neanthes arenaceodentata

International Nuclear Information System (INIS)

Harrison, F.L.; Anderson, S.L.

1988-12-01

The effects of lifetime exposure to chronic irradiation on reproductive success were assessed for laboratory populations of the polychaete worm Neanthes arenaceodentata. Lifetime exposure was initiated upon the spawning of the P 1 female and was terminated upon spawning of the F 1 female. Groups of experimental worms received either no radiation (controls) or 0.19, 2.1, or 17 mGy/h. The total dose received by the worms was either background or approximately 0.55, 6.5, or 54 Gy, respectively. The broods from the F 1 mated pairs were sacrificed before hatching occurred, and information was obtained on brood size, on the number of normal and abnormal embryos, and on the number of embryos that were living, dying, and dead. The mean number of embryos in the broods from the F 1 females exposed to lifetime radiation of 0.19 and 2.1 mGy/h was not significantly different from the mean number of embryos from control females; however, the mean number of embryos was different from those F 1 females exposed to 17 mGy/h. There was a significant reduction in the number of live embryos in the broods from the F 1 mated pairs that were exposed to the lowest dose rate given, 0.19 mGy/h, as well as those exposed to 2.1 and 17 mGy/h. Also, increased percentages of abnormal embryos were determined in the broods of all the radiation-exposed groups. 39 refs., 10 figs., 15 tabs

Tube holding system

International Nuclear Information System (INIS)

Cunningham, R.C.

1978-01-01

A tube holding rig is described for the lateral support of tubes arranged in tight parcels in a heat exchanger. This tube holding rig includes not less than two tube supporting assemblies, with a space between them, located crosswise with respect to the tubes, each supporting assembly comprising a first set of parallel components in contact with the tubes, whilst a second set of components is also in contact with the tubes. These two sets of parts together define apertures through which the tubes pass [fr

Bifurcation Analysis for an SEIRS-V Model with Delays on the Transmission of Worms in a Wireless Sensor Network

Directory of Open Access Journals (Sweden)

Zizhen Zhang

2017-01-01

Full Text Available Hopf bifurcation for an SEIRS-V model with delays on the transmission of worms in a wireless sensor network is investigated. We focus on existence of the Hopf bifurcation by regarding the diverse delay as a bifurcation parameter. The results show that propagation of worms in the wireless sensor network can be controlled when the delay is suitably small under some certain conditions. Then, we study properties of the Hopf bifurcation by using the normal form theory and center manifold theorem. Finally, we give a numerical example to support the theoretical results.

HF electronic tubes. Technologies, grid tubes and klystrons

International Nuclear Information System (INIS)

Lemoine, Th.

2009-01-01

This article gives an overview of the basic technologies of electronic tubes: cathodes, electronic optics, vacuum and high voltage. Then the grid tubes, klystrons and inductive output tubes (IOT) are introduced. Content: 1 - context and classification; 2 - electronic tube technologies: cathodes, electronic optics, magnetic confinement (linear tubes), periodic permanent magnet (PPM) focussing, collectors, depressed collectors; 3 - vacuum technologies: vacuum quality, surface effects and interaction with electrostatic and RF fields, secondary emission, multipactor effect, thermo-electronic emission; 4 - grid tubes: operation of a triode, tetrodes, dynamic operation and classes of use, 'common grid' and 'common cathode' operation, ranges of utilisation and limitations, operation of a tetrode on unadjusted load, lifetime of a tetrode, uses of grid tubes; 5 - klystrons: operation, impact of space charge, multi-cavity klystrons, interaction efficiency, extended interaction klystrons, relation between interaction efficiency, perveance and efficiency, ranges of utilization and power limitations, multi-beam klystrons and sheet beam klystrons, operation on unadjusted load, klystron band pass and lifetime, uses; 6 - IOT: principle of operation, ranges of utilisation and limitations, interaction efficiency and depressed collector IOT, IOT lifetime and uses. (J.S.)

Importance of dose metrics for lethal and sublethal sediment metal toxicity in the oligochaete worm Lumbriculus variegatus

Energy Technology Data Exchange (ETDEWEB)

Penttinen, O.P.; Kilpi-Koski, J.; Toivainen, K. [Helsinki Univ., Lahti (Finland). Dept. of Ecology end Environmental Sciences; Jokela, M. [Mikkeli Univ. of Applied Sciences, Mikkeli (Finland); Vaeisaenen, A. [Jyvaeskylae Univ. (Finland). Dept. of Chemistry

2008-02-15

Background, aims, and scope. There is an increasing demand for controlled toxicity tests to predict biological effects related to sediment metal contamination. In this context, questions of metal-specific factors, sensitivity of toxicity endpoints, and variability in exposure duration arise. In addition, the choice of the dose metrics for responses is equally important and is related to the applicability of the concept of critical body residue (CBR) in exposure assessments, as well as being the main focus of this study. Methods. Experiments were conducted to assess toxicity of Cd, Cr, Cu and Pb to the oligochaete worm Lumbriculus variegatus with the aim of determining CBRs for two response metrics. Mortality and feeding activity of worms exposed to sediment-spiked metals were used as end-points in connection with residue analyses from both the organisms and the surrounding media. Results. LC50 values were 0.3, 1.4, 5.2, and 6.7 mg/L (from 4.7 {mu}mol/L to 128.0 {mu}mol/L), and the order of toxicity, from most toxic to least toxic, was Cu > Cd > Pb>Cr. By relating toxicity to body residue, variability in toxicity among the metals decreased and the order of toxicity was altered. The highest lethal residue value was obtained for Cu (10.8 mmol/kg) and the lowest was obtained for Cd (2.3 mmol/kg). In the 10-d sublethal test, both time and metal exposure were an important source of variation in the feeding activity of worms. The significant treatment effects were observed from worms exposed to Cd or Pb, with the controls yielding the highest feeding rate. However, quantitative changes in the measured end-point did not correlate with the exposure concentrations or body residues, which remained an order of magnitude lower than in the acute exposures. (orig.)

Managing anthelmintic resistance-Variability in the dose of drug reaching the target worms influences selection for resistance?

Science.gov (United States)

Leathwick, Dave M; Luo, Dongwen

2017-08-30

The concentration profile of anthelmintic reaching the target worms in the host can vary between animals even when administered doses are tailored to individual liveweight at the manufacturer's recommended rate. Factors contributing to variation in drug concentration include weather, breed of animal, formulation and the route by which drugs are administered. The implications of this variability for the development of anthelmintic resistance was investigated using Monte-Carlo simulation. A model framework was established where 100 animals each received a single drug treatment. The 'dose' of drug allocated to each animal (i.e. the concentration-time profile of drug reaching the target worms) was sampled at random from a distribution of doses with mean m and standard deviation s. For each animal the dose of drug was used in conjunction with pre-determined dose-response relationships, representing single and poly-genetic inheritance, to calculate efficacy against susceptible and resistant genotypes. These data were then used to calculate the overall change in resistance gene frequency for the worm population as a result of the treatment. Values for m and s were varied to reflect differences in both mean dose and the variability in dose, and for each combination of these 100,000 simulations were run. The resistance gene frequency in the population after treatment increased as m decreased and as s increased. This occurred for both single and poly-gene models and for different levels of dominance (survival under treatment) of the heterozygote genotype(s). The results indicate that factors which result in lower and/or more variable concentrations of active reaching the target worms are more likely to select for resistance. The potential of different routes of anthelmintic administration to play a role in the development of anthelmintic resistance is discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Radiation sensitivity and gene expression in Enchytraeus japonensis, a species of earth worm

International Nuclear Information System (INIS)

Kubota, Yoshihisa

2011-01-01

The importance of radiological protection of the environment based on scientific principles is gaining international recognition as environment issues garner more attention. Earthworm (annelids) is a ubiquitous soil invertebrate known to play an important role in the maintenance of the soil ecosystem and thus selected as one of 12 kinds of reference animals and plants by the ICRP. In the present study, radiation sensitivity and gene expression in a recently described terrestrial oligochaete, Enchytraeus japonensis (E. japonensis) were studied. E. japonensis worms were acutely irradiated at increasing doses of gamma radiation, and the number of worms after 30 days of radiation was examined. The dose effectively inhibiting 50% of proliferation was approximately 22 Gy, which was comparable to the dose required to elicit growth inhibition in other earthworm species. In order to seek other biological endpoints for more sensitive and/or quicker assessment of radiation effects, gene expression profiling in E. japonensis was also performed, and poly (ADP-ribose) polymerase I (PARP I) was identified as a radiation-responsive gene. PARP I transcript level increased dose-dependently. (author)

Early Cambrian sipunculan worms from southwest China.

Science.gov (United States)

Huang, Di-Ying; Chen, Jun-Yuan; Vannier, Jean; Saiz Salinas, J I

2004-08-22

We report the discovery of sipunculan worms from the Lower Cambrian Maotianshan Shale, near Kunming (southwest China). Their sipunculan identity is evidenced by the general morphology of the animals (sausage-shaped body with a slender retractable introvert and a wider trunk) and by other features, both external (e.g. perioral crown of tentacles, and hooks, papillae and wrinkle rings on the body surface) and internal (U-shaped gut, and the anus opening near the introvert-trunk junction). The three fossil forms (Archaeogolfingia caudata gen. et sp. nov., Cambrosipunculus tentaculatus gen. et sp. nov. and Cambrosipunculus sp.) have striking similarities to modern sipunculans, especially the Golfingiidae to which their evolutionary relationships are discussed. This study suggests that most typical features of extant sipunculans have undergone only limited changes since the Early Cambrian, thus indicating a possible evolutionary stasis over the past 520 Myr.

CHRONIC EFFECTS OF THE HERBICIDE DIURON ON FRESHWATER CLADOCERANS,AMPHIPODS,MIDGES,MINNOWS,WORMS, AND SNAILS

Science.gov (United States)

The chronic effects of the herbicide diuron on survival and reproduction of Daphnia pulex, and survival and growth of the amphipod Hyalella azteca, the midge Chironomus tentans, juvenile and embro/larval fathead minnows, Pimephales promelas, annelid worms, Lumbriculus variegatus,...

Taxonomy Icon Data: Ptychodera flava Eschscholtz (Acorn worm) [Taxonomy Icon

Lifescience Database Archive (English)

Full Text Available Ptychodera flava Eschscholtz (Acorn worm) Ptychodera flava Hemichordata Ptychodera_flava_L.png Ptycho...dera_flava_NL.png Ptychodera_flava_S.png Ptychodera_flava_NS.png http://biosciencedbc.jp/t...axonomy_icon/icon.cgi?i=Ptychodera+flava&t=L http://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Ptychodera+fla...va&t=NL http://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Ptychodera+flava&t=S htt...p://biosciencedbc.jp/taxonomy_icon/icon.cgi?i=Ptychodera+flava&t=NS http://togodb.biosciencedbc.jp/togodb/view/taxonomy_icon_comment_en?species_id=161 ...

Tube to tube excursive instability - sensitivities and transients

International Nuclear Information System (INIS)

Brown, M.; Layland, M.W.

1980-01-01

A simple basic analysis of excursive instability in a boiler tube shows how it depends upon operating conditions and physical properties. A detailed mathematical model of an AGR boiler is used to conduct a steady state parameter sensitivity survey. It is possible from this basis to anticipate the effects of changes in operating conditions and changes in design parameters upon tube to tube stability. Dynamic responses of tubes operating near the stability threshold are examined using a mathematical model. Simulated excursions are triggered by imparting small abrupt pressure changes on the boiler inlet pressure. The influences of the magnitude of the pressure change, waterside friction factor and gas side coupling between tubes are examined. (author)

Tube-support response to tube-denting evaluation. Volume 1. Final report

International Nuclear Information System (INIS)

Anderson, P.L.; Hall, J.F.; Shah, P.K.; Wills, R.L.

1983-05-01

The response of the tube supports is one of the important considerations of tube denting in a steam generator. Investigations have indicated that damaged tube supports have the potential to distort and damage tubes. This investigation considers the response to tube denting of the Combustion Engineering type tube supports. Drilled support plates and eggcrate tube supports are tested in a model steam generator in which tube denting is induced. The experimental data is used to verify and refine analytical predictor models developed using finite element techniques. It was found that analytical models underpredicted the deformations of the tube supports and appropriate modifications to enhance the predictive capability are identified. Non-destructive examination methods are evaluated for application to operating steam generators. It was found that the standard eddy current and profilometry techniques are acceptable methods for determining tube deformations, but these techniques are not adequate to assess tube support damage. Radiography is judged to be the best available means of determining the extent and progression of damage in tube supports

Condenser tube buckling within tube-tubesheet joints

International Nuclear Information System (INIS)

Willertz, L.E.; Kalnins, A.; Updike, D.P.

1991-01-01

The problem of the appearance of protrusions, or bumps, in the interior of roller-expanded tubes within a tubesheet is addressed. Such bumps have been observed in condensers of power plants. A brief history of the reported occurrences of the bumps is given. The hypothesis is advanced that the mechanics of the formation of the bumps is similar to a buckling problem that has 'bifurcation at infinity'. Following this hypothesis, a two-dimensional physical model is developed, and the application of this model to study a three-dimensional bump is proposed. It is proposed in this paper that an initial deviation from the circular shape of the tube required to produce a bump. It is shown that without such a deviation the tubes cannot buckle. An experiment with short tube segments has been performed that verifies some of the features of the observed condenser tube bumps. Exactly what force produced the initial deviation for the observed bumps is still unknown. Available evidence implicates the hydro-laser jet that is used in the cleaning of tubes and tubesheets. A scenario of how a bump could have been produced by the hydro-laser jet is proposed. (author)

A New Design of the Universal Test Rig to Measure the Wear Characterizations of Polymer Acetal Gears (Spur, Helical, Bevel, and Worm

Directory of Open Access Journals (Sweden)

Samy Yousef

2015-01-01

Full Text Available This work aims to study the wear characterization of common types of acetal polymer gears (spur, helical, bevel, and worm using a new TS universal test rig, in order to obtain reliable results and as a reference when compared with acetal nanocomposite gears later. The TS universal test rig consists of three different units that are connected by a main driver shaft and a pair of constantly meshing metal spur gears, which transfer power to the bevel and worm test units. The first unit is used to test the bevel gears, the second unit is used to test the spur and helical gears, and the third unit is used to test the worm gears. The loading mechanism is similarly designed to block the brake mechanism. Hobbing and milling machines were used to machine an injection-moulded polymer flanges and produce the tested gears. All gear pairs, except the worm gear, have identical gear ratios. The experiments were performed at speed 1420 rpm and the torque was 4 Nm. The results showed that the wear rates (in the form of weight loss of spur gears were consistent with the previous results and the other gear types had larger wear rates.

Red worm behavior (Eisenia spp.) in vermicomposting systems of organic residues

OpenAIRE

Mamani-Mamani Gladys; Mamani-Pati Francisco; Sainz-Mendoza Humberto; Villca-Huanaco René

2012-01-01

This work evaluates the behavior of the vermicomposting red worm (Eisenia spp.) in two environments (greenhouse and unsheltered) and with two solid organic substrates (cow manure=CM and kitchen waste=KW) in the zone of Carmen Pampa, Nor Yungas Province, Department of La Paz – Bolivia, using a factorial design with two factors and three repetitions (ANOVA analysis). The largest number of cocoons was found in the greenhouse treatment, with 64 in CM and 41 in KW. Cocoon viability was also greate...

Facile Synthesis of Worm-like Micelles by Visible Light Mediated Dispersion Polymerization Using Photoredox Catalyst.

Science.gov (United States)

Yeow, Jonathan; Xu, Jiangtao; Boyer, Cyrille

2016-06-08

Presented herein is a protocol for the facile synthesis of worm-like micelles by visible light mediated dispersion polymerization. This approach begins with the synthesis of a hydrophilic poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) homopolymer using reversible addition-fragmentation chain-transfer (RAFT) polymerization. Under mild visible light irradiation (λ = 460 nm, 0.7 mW/cm(2)), this macro-chain transfer agent (macro-CTA) in the presence of a ruthenium based photoredox catalyst, Ru(bpy)3Cl2 can be chain extended with a second monomer to form a well-defined block copolymer in a process known as Photoinduced Electron Transfer RAFT (PET-RAFT). When PET-RAFT is used to chain extend POEGMA with benzyl methacrylate (BzMA) in ethanol (EtOH), polymeric nanoparticles with different morphologies are formed in situ according to a polymerization-induced self-assembly (PISA) mechanism. Self-assembly into nanoparticles presenting POEGMA chains at the corona and poly(benzyl methacrylate) (PBzMA) chains in the core occurs in situ due to the growing insolubility of the PBzMA block in ethanol. Interestingly, the formation of highly pure worm-like micelles can be readily monitored by observing the onset of a highly viscous gel in situ due to nanoparticle entanglements occurring during the polymerization. This process thereby allows for a more reproducible synthesis of worm-like micelles simply by monitoring the solution viscosity during the course of the polymerization. In addition, the light stimulus can be intermittently applied in an ON/OFF manner demonstrating temporal control over the nanoparticle morphology.

Edible peanut worm ( Sipunculus nudus) in the Beibu Gulf: Resource, aquaculture, ecological impact and counterplan

Science.gov (United States)

Li, Junwei; Xie, Xiaoyong; Zhu, Changbo; Guo, Yongjian; Chen, Suwen

2017-10-01

Sipunculus nudus is an important economic species because of its high nutritional and medicinal values. The exploitation and utilization of S. nudus primarily occur in the coastal regions of the Beibu Gulf. However, wild resource of S. nudus is rapidly decreasing because of the overexploitation, which has led to considerable developments of artificial breeding techniques. The cultivation scale of S. nudus has increased in response to successful artificial breeding; however, methods for culturing S. nudus in tidal flats or ponds require further study. Most studies have focused on the breeding, nutrition, medical value and ecological impact of these worms. Studies on the distribution, sediment requirements, nutrition characteristics, breeding techniques and aquaculture ecology of this species are summarized in this paper to promote the development of the aquaculture industry for S. nudus. The high biomass of S. nudus in the Beibu Gulf is positively correlated with the sediment characteristics and water quality of the region. The production of peanut worm has improved to some extent through culturing; however, the nutrient value and ecological environment problems have been observed, which reflect the over exploitation of trace elements and the sediment. These problems will worsen unless they are resolved, and the release of organic materials, nitrogen and phosphorus during harvesting impacts the coastal environment. Moreover, genetic erosion is a potential risk for larvae in artificial breeding programs in tidal flats. Therefore, culturing and collecting methods should be improved and the wild resource conservation should be implemented to promote the sustainable development of the peanut worm.

Dental worm disease.

Science.gov (United States)

Sabbatani, Sergio; Fiorino, Sirio

2016-12-01

During human evolution, the period in which groups of humans stopped harvesting fruits and seeds growing wild and introduced the cultivation of cereals as well as the domestication of animals represents a very important event. This circumstance had a considerable impact on human pathocenosis, increasing the risk of infectious diseases of animal origin. The aim of this review was to summarise the archaeological and palaeo-pathological evidence in the literature concerning this topic. Starting from early prehistory (about 1.5 million years ago) up to the historical period, several authors have described the changes in human habits and the consequent changes in food supply, leading to the transition from a protein- to a carbohydrate-rich diet across a broad interval of time. This led to additional problems for human health. The increased accumulation of carbohydrate debris in the odonto-stomatological apparatus, without the appropriate use of hygiene in the oral cavity, increased the risk of infectious disease involving the mouth. Therefore, since the Neolithic period there has been a higher risk of tooth caries, abscesses, deep infection of the teeth roots, reaching also the mandibular and maxillary bone. Several hypotheses have been proposed by the distinct civilizations, which have alternated in the different ages, to explain the cause of these human health problems, including the idea that a "dental worm" could be involved in this process, such as in the Sumerian period. We describe and discuss further modifications of this theory, developed in Egypt, Assyria, Babylon, China, Greece, in Etruscan cities and in Rome in ancient times as well as in the Middle Ages, and the evolution of scientific thought on this topic in the past 300 years. In addition, the results of some palaeo-pathological studies, which were performed on human remains, such as the maxillary bone and teeth, mainly in different geographical areas in Italy, are examined and reported.

Chest tube insertion

Science.gov (United States)

Chest drainage tube insertion; Insertion of tube into chest; Tube thoracostomy; Pericardial drain ... Be careful there are no kinks in your tube. The drainage system should always sit upright and be placed ...

Assay of old-world screw-worm fly, Chrysomya bezziana, labelled with 32P

International Nuclear Information System (INIS)

Lamb, K.P.; Sands, D.P.A.; Spradbery, J.P.

1978-01-01

Techniques for 32 P labelling of larvae and adults of the screw-worm fly, Chrysomya bezziana, are described. Egg masses of labelled flies were readily identified. At the doses used for field releases, oviposition activity, fertility and longevity of female flies were not adversely affected. Radioactive egg masses were recovered from sentinel animals following field release of labelled flies. (Auth.)

Vibro-impact responses of a tube with tube--baffle interaction

International Nuclear Information System (INIS)

Shin, Y.S.; Sass, D.E.; Jendrzejczyk, J.A.

1978-01-01

The relatively small, inherent tube-to-baffle hole clearances associated with manufacturing tolerances in heat exchangers affect the vibrational characteristics and the response of the tube. Numerical studies were made to predict the vibro-impact response of a tube with tube-baffle interaction. The finite element method has been employed with a non-linear elastic contact spring-dashpot to model the effect of the relative approach between the tube and the baffle plate. The coupled equations of motion are directly integrated with a proportional system damping represented by a linear combination of mass and stiffness. Lumped mass approach with explicit time integration scheme was found to be a suitable choice for tube-baffle impacting analysis. Fourier analyses indicate that the higher mode contributions to the tube response are significant for strong tube-baffle impacting. The contact damping forces are negligible compared with the contact spring forces. The numerical analysis results are in reasonably good agreement with those of the experiments

A deformable magnetizable worm in a magnetic field-A prototype of a mobile crawling robot

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, Klaus [Faculty of Mechanical Engineering, Technische Universitaet Ilmenau, PF 10 05 65, 98684 (Germany)]. E-mail: klaus.zimmermann@tu-ilmenau.de; Naletova, Vera A. [Department of Mechanics and Mathematics, Lomonosov Moscow State University, Moscow 119992 (Russian Federation); Institute of Mechanics, Lomonosov Moscow State University, 1, Michurinsky Pr., Moscow 119192 (Russian Federation); Zeidis, Igor [Faculty of Mechanical Engineering, Technische Universitaet Ilmenau, PF 10 05 65, 98684 (Germany); Turkov, Vladimir A. [Institute of Mechanics, Lomonosov Moscow State University, 1, Michurinsky Pr., Moscow 119192 (Russian Federation); Kolev, Emil [Faculty of Mechanical Engineering, Technische Universitaet Ilmenau, PF 10 05 65, 98684 (Germany); Lukashevich, Mikhail V. [Institute of Mechanics, Lomonosov Moscow State University, 1, Michurinsky Pr., Moscow 119192 (Russian Federation); Stepanov, Gennadij V. [State Research Institute of Chemistry and Technology of Organoelement Compounds, 38, Shosse Entuziastov, Moscow 111123 (Russian Federation)

2007-04-15

The paper deals with the deformation and worm-like motion of a magnetizable elastic body in an alternate magnetic field from an experimental and a theoretically point of view. Theoretically (analytically and numerically) calculated results of the body velocity are compared with the experimental data.

The Schistosoma mansoni Cytochrome P450 (CYP3050A1 Is Essential for Worm Survival and Egg Development.

Directory of Open Access Journals (Sweden)

Peter D Ziniel

2015-12-01

Full Text Available Schistosomiasis affects millions of people in developing countries and is responsible for more than 200,000 deaths annually. Because of toxicity and limited spectrum of activity of alternatives, there is effectively only one drug, praziquantel, available for its treatment. Recent data suggest that drug resistance could soon be a problem. There is therefore the need to identify new drug targets and develop drugs for the treatment of schistosomiasis. Analysis of the Schistosoma mansoni genome sequence for proteins involved in detoxification processes found that it encodes a single cytochrome P450 (CYP450 gene. Here we report that the 1452 bp open reading frame has a characteristic heme-binding region in its catalytic domain with a conserved heme ligating cysteine, a hydrophobic leader sequence present as the membrane interacting region, and overall structural conservation. The highest sequence identity to human CYP450s is 22%. Double stranded RNA (dsRNA silencing of S. mansoni (SmCYP450 in schistosomula results in worm death. Treating larval or adult worms with antifungal azole CYP450 inhibitors results in worm death at low micromolar concentrations. In addition, combinations of SmCYP450-specific dsRNA and miconazole show additive schistosomicidal effects supporting the hypothesis that SmCYP450 is the target of miconazole. Treatment of developing S. mansoni eggs with miconazole results in a dose dependent arrest in embryonic development. Our results indicate that SmCYP450 is essential for worm survival and egg development and validates it as a novel drug target. Preliminary structure-activity relationship suggests that the 1-(2,4-dichlorophenyl-2-(1H-imidazol-1-ylethan-1-ol moiety of miconazole is necessary for activity and that miconazole activity and selectivity could be improved by rational drug design.

Liesegang rings in tissue. How to distinguish Liesegang rings from the giant kidney worm, Dioctophyma renale.

Science.gov (United States)

Tuur, S M; Nelson, A M; Gibson, D W; Neafie, R C; Johnson, F B; Mostofi, F K; Connor, D H

1987-08-01

Liesegang rings (LRs) are periodic precipitation zones from supersaturated solutions in colloidal systems. They are formed by a process that involves an interplay of diffusion, nucleation, flocculation or precipitation, and supersaturation. Examples include LRs of calcium carbonate in oölitic limestone (in nature), LRs of silver chromate in gelatin (in vitro), and LRs of glycoprotein in pulmonary corpora amylacea (in vivo). Here we describe LRs in lesions from 29 patients--mostly lesions of the kidney, synovium, conjunctiva, and eyelid. The LRs formed in cysts, or in fibrotic, inflamed, or necrotic tissue. The LRs in this study varied greatly in shape and size, measuring 7-800 microns. Special stains and energy-dispersive radiographic analysis or scanning electron microscopy revealed that some LRs contained calcium, iron (hemosiderin), silicon, and sulfur. Some pathologists have mistaken LRs for eggs, larvae, or adults of the giant kidney worm, Dioctophyma renale. D. renale is a large blood-red nematode that infects a variety of fish-eating mammals, especially mink. Fourteen documented infections of humans have been recorded, usually with adult worms expelled from the urethra. The adult worms are probably the largest helminth to parasitize humans. Eggs of D. renale are constant in size (60-80 microns X 39-47 microns), contain an embryo, and have characteristic sculpturing of the shell. Liesegang rings should not be mistaken for eggs, larvae, or adults of D. renale, or for any other helminth.

In vitro anthelmintic activity of Heliotropium indicum, Senna fistula and Spigelia anthelmia used as worm expeller in South West Nigeria

Directory of Open Access Journals (Sweden)

Oluwakemi K. Sobiyi

2015-06-01

Full Text Available The anthelmintic potential of Heliotropium indicum, Senna fistula and Spigelia anthelmia were investigated using nematodes larvae from sheep and adult earthworms in order to justify the folkloric claim of the plants as worm expeller in south west of Nigeria. The acetone, ethanol, hydro-alcohol and distilled water extracts showed dose-dependent anthelmintic activities at the different concentrations (0.25, 0.50, 1.0 mg/ml when tested against nematodes larvae. The order of anthelmintic effect for the plants was H. indicum> S. fistula> S. anthelmia. Acetone and ethanol extracts of the three plants showed the most effective activity (100% mortality against adult earth worm (Pheretima posthuma after 30 min of exposure The reference standard drug (Vermox® showed less effectiveness compared to the medicinal plants used in the study. Overall, the study indicates that Heliotropium indicum, Senna fistula and Spigelia anthelmia are potential anthelmintic herbal drugs, which in turn validates the use of the three species as worm expellers by the Yorubas tribe of South West Nigeria.

Pressure tube reactor

International Nuclear Information System (INIS)

Susuki, Akira; Murata, Shigeto; Minato, Akihiko.

1993-01-01

In a pressure tube reactor, a reactor core is constituted by arranging more than two units of a minimum unit combination of a moderator sealing pipe containing a calandria tube having moderators there between and a calandria tube and moderators. The upper header and a lower header of the calandria tank containing moderators are communicated by way of the moderator sealing tube. Further, a gravitationally dropping mechanism is disposed for injecting neutron absorbing liquid to a calandria gas injection portion. A ratio between a moderator volume and a fuel volume is defined as a function of the inner diameter of the moderator sealing tube, the outer diameter of the calandria tube and the diameter of fuel pellets, and has no influence to intervals of a pressure tube lattice. The interval of the pressure tube lattice is enlarged without increasing the size of the pressure tube, to improve production efficiency of the reactor and set a coolant void coefficient more negative, thereby enabling to improve self controllability and safety. Further, the reactor scram can be conducted by injecting neutron absorbing liquid. (N.H.)

Vertical steam generator with slab-type tube-plate with even tube bundle washing

International Nuclear Information System (INIS)

Manek, O.; Masek, V.; Motejl, V.; Quitta, R.

1980-01-01

A shielding plate supporting the tubes attached to the tube plate of a vertical steam generator is mounted above the tube plate. Tube sleeves are designed with a dimensional tolerance relative to the heat transfer tubes and the sleeve end and the tube plate end. A separate space is thus formed above the tube plate in which circulation or feed water is introduced to flow between the branch and the heat transfer tube. This provides intensive washing of heat transfer tubes at a critical point and prevents deposit formation, thus excluding heat transfer tube failures. (J.B.)

Influencia de la lubricación en la eficiencia de engranajes de tornillo sinfín//Influence of oil lubrication on cylindrical worm gear efficiency

Directory of Open Access Journals (Sweden)

Gonzalo González-Rey

2012-12-01

Full Text Available Fue desarrollado un procedimiento para estimar la eficiencia de engranajes de tornillo sinfín cilíndrico considerando pérdidas de potencia por fricción entre flancos conjugados, tres bases de lubricantes y sistema de lubricación. El procedimiento fue validado por comparación con valores de eficiencia reportados para engranajes fabricados por una compañía especializada en engranajes. Los resultadosestablecen fuerte dependencia entre el coeficiente de fricción y la velocidad de deslizamiento hasta valores inferiores a 0.4 m/s en engranajes con aceites sintéticos y para engranajes con inmersión en aceites minerales el coeficiente de fricción de ensayo fue observado constante hasta velocidades dedeslizamiento inferiores a 0,9 m/s. Fue determinado que en sistemas de lubricación por inmersión, los aceites sintéticos en sustitución de aceites minerales mejoran como promedio en 44 % la eficiencia de engranajes de tornillo sinfín. Finalmente, fue formulado un módulo racional del engranaje orientado amaximizar la eficiencia del engranaje lubricado con aceite sintético.Palabras claves: eficiencia, engranaje, tornillo sinfín, lubricante, aceite sintético, ISO/TR 145281._______________________________________________________________________________AbstractIn this study, a general procedure is proposed for the prediction of cylindrical worm gear efficiency takinginto account friction losses between worm and wheel gear, three base oils and lubrication system. Thevalidation of procedure was achieved by comparing with values of efficiency for worm gear unitsreferenced by a German gear manufacturer company. In the case of worm gears lubricated with syntheticbase oils, results show an strong dependency between basic coefficient of friction and sliding velocity up to0,4 m/s and for dip lubrication with mineral oils the basic coefficient of friction was observed constant forsliding velocity below 0,9 m/s. Other results confirm the increase of

Use of CATHENA to model calandria-tube/moderator heat transfer after pressure-tube/calandria-tube ballooning contact

International Nuclear Information System (INIS)

Fan, H.Z.; Bilanovic, Z.; Nitheanandan, T.

2004-01-01

A study was performed to assess the effect of the calandria-tube/moderator heat transfer after pressure-tube/calandria tube ballooning contact using CATHENA. Results of this study indicated that the analytical tool, CATHENA, can be applied for pool boiling heat transfer on the external surface of a large diameter tube, such as the calandria tube used in CANDU reactors. The methodology in such CANDU-generic study can be used to simulate the tube surface with multiple boiling regimes and to assess the benefits of closely coupling thermalhydraulics modelling and fuel/fuel channel behaviour modelling. CATHENA (Canadian Algorithm for THErmalhydraulic Network Analysis) is a one-dimensional, two-fluid thermalhydraulic simulation code designed by AECL to analyse two-phase flow and heat transfer in piping networks. The detailed heat transfer package in CATHENA allows a connection to be established from the multiple solid surfaces of tubes to the surrounding large amount of moderator water, which acts as a heat sink during a postulated loss of coolant event. The generalized heat transfer package within CATHENA allows the tube walls to be divided into several layers in the radial direction and several sectors in the circumferential direction, to account for heat transfer conditions in these two directions. The CATHENA code with the generalized heat transfer package is capable of capturing key pool-boiling phenomena such as nucleate, transition and film boiling heat transfer as well as an ability to model the rewet phenomenon to some extent. A CATHENA input model was generated and used in simulations of selected contact boiling experiment test cases. The transient wall temperatures have been calculated in different portions of the calandria tube. By using this model an adequate agreement was achieved between CATHENA calculation and experimental measurement The CATHENA code enables one to investigate the transient and local thermal-mechanical behaviour of the calandria tube

Antigens of worms and eggs showed a differentiated detection of specific IgG according to the time of Schistosoma mansoni infection in mice

Directory of Open Access Journals (Sweden)

Rafaella Fortini Queiroz Grenfell

2012-08-01

Full Text Available INTRODUCTION: The correlation between the immunological assay and the antibody titer can offer a tool for the experimental analysis of different phases of the disease. METHODS: Two simple immunological assays for Schistosoma mansoni in mice sera samples based on specific IgG detection for worms soluble antigens and eggs soluble antigens were standardized and evaluated in our laboratory. Fifty mice were used in negative and positive groups and the results obtained by enzyme-linked immunosorbent assays (ELISA assays were compared with the number of worms counted and the IgG titers at different times of infection. RESULTS: Data showed that ELISA using adult worm antigens (ELISA-SWAP presented a satisfactory correlation between the absorbance value of IgG titers and the individual number of worms counted after perfusion technique (R²=0.62. In addition, ELISA-SWAP differentially detected positive samples with 30 and 60 days post infection (p=0.011 and 0.003, respectively, whereas ELISA using egg antigens (ELISA-SEA detected samples after 140 days (p=0.03. CONCLUSIONS: These data show that the use of different antigens in immunological methods can be used as potential tools for the analysis of the chronological evolution of S. mansoni infection in murine schistosomiasis. Correlations with human schistosomiasis are discussed.

Improvement of pump tubes for gas guns and shock tube drivers

Science.gov (United States)

Bogdanoff, D. W.

1990-01-01

In a pump tube, a gas is mechanically compressed, producing very high pressures and sound speeds. The intensely heated gas produced in such a tube can be used to drive light gas guns and shock tubes. Three concepts are presented that have the potential to allow substantial reductions in the size and mass of the pump tube to be achieved. The first concept involves the use of one or more diaphragms in the pump tube, thus replacing a single compression process by multiple, successive compressions. The second concept involves a radical reduction in the length-to-diameter ratio of the pump tube and the pump tube piston. The third concept involves shock heating of the working gas by high explosives in a cyclindrical geometry reusable device. Preliminary design analyses are performed on all three concepts and they appear to be quite feasible. Reductions in the length and mass of the pump tube by factors up to about 11 and about 7, respectively, are predicted, relative to a benchmark conventional pump tube.

Online decision trees to support the control of gastrointestinal worms in ruminants

OpenAIRE

Koopmann, Regine; Dämmrich, Michaela; Ploeger, Harm

2014-01-01

Control of gastrointestinal worms is crucial to any pasture system for ruminants. To support the farmer's foresighted planning of pasturage and to avoid excessive deworm-ing in Germany we created four decision trees and put them online. They are freely accessible at www.weide-parasiten.de. There is one decision tree for young first season cattle in intensive dairy husbandry, one decision tree for young cattle in suckling-cow management and one decision tree for sheep and goats, respectively.

Analysis and testing of model worm type tanks on shaking table

International Nuclear Information System (INIS)

Ma, D.

1996-01-01

This report contains the summary of the lectures, notes and discussions at the IAEA workshop on Benchmark studies for seismic analysis of WWER NPPs, held in 1995 at St. Petersburg. The specific subject of main interest at the meeting was the testing of unanchored worm-type tanks in the emergency cooling systems of WWER-440/213 NPPs such as Paks and Bohunice. Seismic forces were not considered in the original design, therefore this is one of the important tasks in the assessment of seismic vulnerabilities of the WWER NPPs

Diversity and Activity of Insect Natural Enemies of the Bag worm (Lepidoptera: Psychidae) within an Oil Palm Plantation in Perak, Malaysia

International Nuclear Information System (INIS)

Norman Kamarudin; Othman Arshad

2016-01-01

Bag worms (Lepidoptera: Psychidae) are one of the important leaf-eating pests of oil palm in Malaysia and Indonesia. Crop losses, due to the extensive defoliation by a serious bag worm attack are inevitable. The establishment and propagation of the bag worm's parasitoids, depend very much on species of flowering plants as sources of nectar. Cassia cobanensis, was proven suitable due to its attractiveness to most bag worm parasitoids. A study to assess the diversity of bag worm's natural enemies (hymenopterous parasitoids and reduuvid predatory bugs) on the C. cobanensis plant and within the undergrowth of the oil palm planting block was evaluated by sweep net and sticky trap sampling. Environmental parameters such as light intensity, temperature and relative humidity were also recorded during the sampling to determine their possible range of influence towards the activity of the insect natural enemies. The Shannon-Wiener diversity index of insect natural enemies occurring on the C. cobanensis plant was 2.32. Among the dominant parasitoids observed on C. cobanensis plants are chalcids (Brachymeria lugubris and Brachymeria carinata) and braconids (Dolichogenidea metesae and Apanteles aluella), besides the reduuvid predator, Cosmolestes picticeps. In contrast, within the oil palm planting block, the undergrowth within the non-harvesting path only recorded a much lower diversity index of 1.09 and 1.12 each, in a block with C. cobanensis at the roadside and without, respectively. However, C. picticeps was shown to be much more dominant within both oil palm planting blocks, up to two- to three-fold, with much lesser numbers of hymenopterous parasitoids (less than five individuals). This indicates the important contribution of C. cobanensis plant towards enriching the diversity of the parasitoids, which are normally not found within the oil palm block, due to much less intense sunlight. In terms of insect activity, they are significantly more active in the

Vibro-impact responses of a tube with tube--baffle interaction. [LMFBR

Energy Technology Data Exchange (ETDEWEB)

Shin, Y S; Sass, D E; Jendrzejczyk, J A

1978-01-01

The relatively small, inherent tube-to-baffle hole clearances associated with manufacturing tolerances in heat exchangers affect the vibrational characteristics and the response of the tube. Numerical studies were made to predict the vibro-impact response of a tube with tube-baffle interaction. The finite element method has been employed with a non-linear elastic contact spring-dashpot to model the effect of the relative approach between the tube and the baffle plate. The coupled equations of motion are directly integrated with a proportional system damping represented by a linear combination of mass and stiffness. Lumped mass approach with explicit time integration scheme was found to be a suitable choice for tube-baffle impacting analysis. Fourier analyses indicate that the higher mode contributions to the tube response are significant for strong tube-baffle impacting. The contact damping forces are negligible compared with the contact spring forces. The numerical analysis results are in reasonably good agreement with those of the experiments.

Bender/Coiler for Tubing

Science.gov (United States)

Stoltzfus, J. M.

1983-01-01

Easy-to-use tool makes coils of tubing. Tubing to be bend clamped with stop post. Die positioned snugly against tubing. Operator turns handle to slide die along tubing, pushing tubing into spiral groove on mandrel.

Evaluating the sustainability, scalability, and replicability of an STH transmission interruption intervention: The DeWorm3 implementation science protocol

Science.gov (United States)

Ajjampur, Sitara S. R.; Bailey, Robin; Galactionova, Katya; Gwayi-Chore, Marie-Claire; Halliday, Katherine; Ibikounle, Moudachirou; Juvekar, Sanjay; Kalua, Khumbo; Kang, Gagandeep; Lele, Pallavi; Luty, Adrian J. F.; Pullan, Rachel; Sarkar, Rajiv; Schär, Fabian; Tediosi, Fabrizio; Weiner, Bryan J.; Yard, Elodie; Walson, Judd

2018-01-01

Hybrid trials that include both clinical and implementation science outcomes are increasingly relevant for public health researchers that aim to rapidly translate study findings into evidence-based practice. The DeWorm3 Project is a series of hybrid trials testing the feasibility of interrupting the transmission of soil transmitted helminths (STH), while conducting implementation science research that contextualizes clinical research findings and provides guidance on opportunities to optimize delivery of STH interventions. The purpose of DeWorm3 implementation science studies is to ensure rapid and efficient translation of evidence into practice. DeWorm3 will use stakeholder mapping to identify individuals who influence or are influenced by school-based or community-wide mass drug administration (MDA) for STH and to evaluate network dynamics that may affect study outcomes and future policy development. Individual interviews and focus groups will generate the qualitative data needed to identify factors that shape, contextualize, and explain DeWorm3 trial outputs and outcomes. Structural readiness surveys will be used to evaluate the factors that drive health system readiness to implement novel interventions, such as community-wide MDA for STH, in order to target change management activities and identify opportunities for sustaining or scaling the intervention. Process mapping will be used to understand what aspects of the intervention are adaptable across heterogeneous implementation settings and to identify contextually-relevant modifiable bottlenecks that may be addressed to improve the intervention delivery process and to achieve intervention outputs. Lastly, intervention costs and incremental cost-effectiveness will be evaluated to compare the efficiency of community-wide MDA to standard-of-care targeted MDA both over the duration of the trial and over a longer elimination time horizon. PMID:29346376

Steam generator tube extraction

International Nuclear Information System (INIS)

Delorme, H.

1985-05-01

To enable tube examination on steam generators in service, Framatome has now developed a process for removing sections of steam generator tubes. Tube sections can be removed without being damaged for treating the tube section expanded in the tube sheet

Prevalence of giant kidney worm (Dioctophyma renale) in wild mink (Mustela vison) in Minnesota

Science.gov (United States)

Mech, L. David; Tracy, Shawn P.

2001-01-01

Of 138 wild mink (Mustela vison) from eastern Minnesota, 27% contained Dioctophyma renale, primarily in the right kidney. No significant difference between prevalence in adult male and immature male mink was found, nor between the prevalence in males versus female mink. Thirteen worms were found in one male mink, representing the highest documented infection intensity of a single wild mink.

Smart worm-like micelles responsive to CO2/N2 and light dual stimuli.

Science.gov (United States)

Jiang, Jianzhong; Wang, Guozheng; Ma, Yuxuan; Cui, Zhenggang; Binks, Bernard P

2017-04-12

CO 2 /N 2 and light dual stimuli-responsive worm-like micelles (WLMs) were obtained by addition of a relatively small amount of a switchable surfactant, 4-butyl-4'-(4-N,N-dimethylhexyloxy-amine) azobenzene bicarbonate (AZO-B6-CO 2 ), sensitive to the same triggers to a binary aqueous solution of cetyltrimethylammonium bromide (CTAB) and sodium salicylate (NaSal).

Elimination of Guinea Worm Disease in Ethiopia; Current Status of the Disease's, Eradication Strategies and Challenges to the End Game.

Science.gov (United States)

Beyene, Habtamu Bedimo; Bekele, Abyot; Shifara, Amanu; Ebstie, Yehenew A; Desalegn, Zelalem; Kebede, Zeyede; Mulugeta, Abate; Deribe, Kebede; Tadesse, Zerihun; Abebe, Tamrat; Kebede, Biruck; Abrha, Getaneh; Jima, Daddi

2017-01-01

Dracunculiasis, also named Guinea Worm Disease (GWD), is one of the Neglected Tropical Diseases (NTDs) caused by a parasitic nematode known as Dracunculus medinensis and has been known since antiquity as 'fiery serpent' from Israelites. It is transmitted to humans via drinking contaminated water containing infective copepods. Given, its feasibility for eradication, the Guinea Worm Eradication Program (GWEP) was launched in 1980 with the aim of eradicating the disease. Since its inception, GWEP has made an extraordinary progress in interrupting transmission. Globally, the number of reported cases reduced from 3.5 million in 20 countries in 1986 to only 22 cases in 2015 from only four countries namely South Sudan, Mali, Chad and Ethiopia. Since Mali has interrupted transmission of GWD in 2016, currently, the disease remains endemic in only three sub-Saharan African countries namely, South Sudan, Chad and Ethiopia. Each endemic country has its own national Guinea Worm Eradication Program. In Ethiopia, the Ethiopian Dracunculiasis Eradication Program (EDEP) which was established in 1993 has made remarkable move towards interruption of disease transmission and now the endgame is fast approaching. The EDEP with support mainly from The Carter Center, WHO, and UNICEF has reduced GWD by more than 99% from 1994 to 2015. In 2015, only 3 indigenous cases in humans and 14 in animals (13 in dogs and 1 in baboon) were reported. In 2016, 3 human cases, 14 dogs and 2 baboon infections were reported.. Refugee influx from the Republic of South Sudan (RSS), increased animal infections with unknown role in transmission of Dracunculiasis, the presence of hard to reach communities and lack of safe water sources in remote non-village areas remain among important challenges at this final stage of GWD eradication in Ethiopia. This paper reviews progress made towards Guinea Worm Eradication with a focus on the experience of the Ethiopian Dracunculiasis Eradication Program (EDEP), and

Worm Control in Livestock: Bringing Science to the Field.

Science.gov (United States)

Kenyon, Fiona; Hutchings, Fiona; Morgan-Davies, Claire; van Dijk, Jan; Bartley, Dave J

2017-09-01

Parasitic roundworm infections are ubiquitous in grazing livestock. Chemical control through the frequent 'blanket' administration of anthelmintics (wormers) has been, and remains, the cornerstone in controlling these infections, but this practice is unsustainable. Alternative strategies are available but, even with the plethora of best practice advice available, have yet to be integrated into routine farming practice. This is probably due to a range of factors, including contradictory advice from different sources, changes to advice following increased scientific understanding, and top-down knowledge exchange patterns. In this article, we discuss the worm control options available, the translation of new best practice advice from science bench to field, and ideas for future work and directions. Copyright © 2017 Elsevier Ltd. All rights reserved.

Helminthic therapy: using worms to treat immune-mediated disease.

Science.gov (United States)

Elliott, David E; Weinstock, Joel V

2009-01-01

There is an epidemic of immune-mediated disease in highly-developed industrialized countries. Such diseases, like inflammatory bowel disease, multiple sclerosis and asthma increase in prevalence as populations adopt modern hygienic practices. These practices prevent exposure to parasitic worms (helminths). Epidemiologic studies suggest that people who carry helminths have less immune-mediated disease. Mice colonized with helminths are protected from disease in models of colitis, encephalitis, Type 1 diabetes and asthma. Clinical trials show that exposure to helminths reduce disease activity in patients with ulcerative colitis or Crohn's disease. This chapter reviews some of the work showing that colonization with helminths alters immune responses, against dysregulated inflammation. These helminth-host immune interactions have potentially important implications for the treatment of immune-mediated diseases.

Anthelmintic Activity of Crude Extract and Essential Oil of Tanacetum vulgare (Asteraceae against Adult Worms of Schistosoma mansoni

Directory of Open Access Journals (Sweden)

Loyana Silva Godinho

2014-01-01

Full Text Available Schistosomiasis, a parasitic disease caused by trematode flatworms of the genus Schistosoma, affects more than 200 million people worldwide, and its control is dependent on a single drug, praziquantel. Tanacetum vulgare (Asteraceae is used in folk medicine as a vermifuge. This study aimed to investigate the in vitro schistosomicidal activity of the crude extract (TV and the essential oil (TV-EO from the aerial parts of T. vulgare. TV-EO was obtained by hydrodistillation and analyzed by GC/MS, which allowed the identification of β-thujone (84.13% as the major constituent. TV and TV-EO, at 200 μg/mL, decreased motor activity and caused 100% mortality of all adult worms. At 100 and 50 μg/mL, only TV caused death of all adult worms, while TV-EO was inactive. TV (200 μg/mL was also able to reduce viability and decrease production of developed eggs. Confocal laser scanning microscopy showed morphological alterations in the tegument of the S. mansoni surface after incubation with TV (50 and 100 μg/mL. Quantitative analysis on the schistosomes tegument showed that TV caused changes in the numbers of tubercles of S. mansoni male worms in a dose-dependent manner. The findings suggest that T. vulgare is a potential source of schistosomicidal compounds.

Effects of the herbicide isoproturon on metallothioneins, growth, and antioxidative defenses in the aquatic worm Tubifex tubifex (Oligochaeta, Tubificidae).

Science.gov (United States)

Mosleh, Yahia Y; Paris-Palacios, Séverine; Couderchet, Michel; Biagianti-Risbourg, Sylvie; Vernet, Guy

2005-07-01

Metallothioneins (MTs) are low molecular weight proteins, mainly implicated in metal ion detoxification. Increase in MT contents is considered to be a specific biomarker of metal exposure. Recently it has been demonstrated that MTs participate in several cellular functions such as regulation of growth, and antioxidative defenses. Therefore, the induction of MTs as biomarkers of exposure to the pesticide isoproturon has been investigated in the aquatic worms Tubifex tubifex. MT levels in exposed worms increased significantly (p isoproturon (maximum increase compared to unexposed controls: +148.56% for 10 mg l(-1) after 4 days of exposure). In response to isoproturon, the activity of glutathione-S-transferase (max. +52%), glutathione-reductase (max. +100%), and catalase (max. +117%) increased, demonstrating the occurrence of an oxidative stress response to the herbicide. Thus, the increase in MT contents caused by isoproturon was interpreted as a defense response towards increased oxidative stress generated by the herbicide. Residues of isoproturon and its metabolites, 1-(4-isopropylphenyl)-3-methylurea, 1-(4-isopropylphenyl) urea, and 4-isopropylanilin were detected in the worm growth medium. Half-life of the herbicide was shorter at a low (0.1 mg l(-1)) initial concentration. The herbicide accumulated in T. tubifex but no metabolite could be detected.

Infection levels of the eyeworm Oxyspirura petrowi and caecal worm Aulonocephalus pennula in the northern bobwhite and scaled quail from the Rolling Plains of Texas.

Science.gov (United States)

Dunham, N R; Peper, S T; Downing, C; Brake, E; Rollins, D; Kendall, R J

2017-09-01

Northern bobwhite (Colinus virginianus) and scaled quail (Callipepla squamata) have experienced chronic declines within the Rolling Plains ecoregion of Texas. Parasitic infection, which has long been dismissed as a problem in quail, has not been studied thoroughly until recently. A total of 219 northern bobwhite and 101 scaled quail from Mitchell County, Texas were captured and donated from 2014 to 2015, and examined for eyeworm (Oxyspirura petrowi) and caecal worm (Aulonocephalus pennula) infections. In 2014, bobwhites averaged 19.6 ± 1.8 eyeworms and 98.6 ± 8.2 caecal worms, and 23.5 ± 2.1 eyeworms and 129.9 ± 10.7 caecal worms in 2015. Scaled quail averaged 4.8 ± 1.0 eyeworms and 50 ± 6.8 caecal worms in 2014, and 5.7 ± 1.3 eyeworms and 38.1 ± 7.1 caecal worms in 2015. This study expands the knowledge of parasitic infection in quail inhabiting the Rolling Plains of Texas. A significant difference was documented in O. petrowi infection between species but there was no significant difference in A. pennula between quail species. No significant difference was detected in parasite infection between the sexes of both northern bobwhite and scaled quail. This study also documented the highest reported O. petrowi infection in both species of quail. Additional research is needed on the life history and infection dynamics of O. petrowi and A. pennula infections to determine if there are individual- and/or population-level implications due to parasitic infection.

The landscape of human genes involved in the immune response to parasitic worms

Directory of Open Access Journals (Sweden)

Fumagalli Matteo

2010-08-01

Full Text Available Abstract Background More than 2 billion individuals worldwide suffer from helminth infections. The highest parasite burdens occur in children and helminth infection during pregnancy is a risk factor for preterm delivery and reduced birth weight. Therefore, helminth infections can be regarded as a strong selective pressure. Results Here we propose that candidate susceptibility genes for parasitic worm infections can be identified by searching for SNPs that display a strong correlation with the diversity of helminth species/genera transmitted in different geographic areas. By a genome-wide search we identified 3478 variants that correlate with helminth diversity. These SNPs map to 810 distinct human genes including loci involved in regulatory T cell function and in macrophage activation, as well as leukocyte integrins and co-inhibitory molecules. Analysis of functional relationships among these genes identified complex interaction networks centred around Th2 cytokines. Finally, several genes carrying candidate targets for helminth-driven selective pressure also harbour susceptibility alleles for asthma/allergy or are involved in airway hyper-responsiveness, therefore expanding the known parallelism between these conditions and parasitic infections. Conclusions Our data provide a landscape of human genes that modulate susceptibility to helminths and indicate parasitic worms as one of the major selective forces in humans.

Capacidad de carga de las transmisiones por tornillo sinfín y corona. // Load capacity of worm gears transmissions.

Directory of Open Access Journals (Sweden)

G. Rivero Llerena

2003-01-01

Full Text Available El uso de los reductores de velocidad comenzó a principios del siglo xx, su extensa difusión en el mundo actual permiteadquirirlos como unidades ensambladas a un costo relativamente bajo para la calidad del producto ofertado. Losantecedentes de este trabajo están en las investigaciones realizadas desde hace más de tres décadas en el ISPJAE. Lacreación de tecnologías propias sobre la base de estas investigaciones ha permitido la producción de reductores develocidad por tornillo sinfín con índices de calidad comparables con los índices de los reductores foráneos. El método dereconversión de reductores de velocidad que han quedado fuera de servicio, es utilizado en Cuba con resultadossatisfactorios a partir de la utilización de las carcasas originales. El presente trabajo pretende destacar la influencia de loserrores de contacto en la capacidad de carga de la transmisión por tornillo sinfín. Se brinda en esta ocasión, unprocedimiento para el cálculo automatizado de la superficie activa del diente de la rueda y se ofrece una expresión decálculo propia que permite pronosticar la capacidad de carga de la transmisión, a partir de la huella de contacto, encorrespondencia con los requisitos de contacto para un grado de precisión dado.Palabras claves: Capacidad de carga, huella de contacto, tornillo sinfín._____________________________________________________________________________Abstract.The use of worm gears transmissions started at the beginning of the 20th century and its wide spread use allow to purchaseas join units with low cost according to the product quality. Investigations that for more than thirty years took place at theISPJAE are the bases of this study. The Cuban technologies have permitted to produce worm gears with a comparablequality as foreign ones. The reconversion method for worm gears out of service is used in Cuba, and satisfactory results areobtained. In this paper are exposed the contact errors influence

Feeding tube - infants

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/007235.htm Feeding tube - infants To use the sharing features on this page, please enable JavaScript. A feeding tube is a small, soft, plastic tube placed ...

A new species and new record of deep-sea scale-worms (Polynoidae: Polychaeta) from the Okinawa Trough and the South China Sea.

Science.gov (United States)

Sui, Jixing; Li, Xinzheng

2017-03-06

A new species of scale-worm, Lepidonotopodium okinawae sp. nov. from the Okinawa Trough is described. The new species differs from the other species of Lepidonotopodium by having 24 segments and numerous foveolae on the surface of elytra with one globular micropapilla in every foveola. A new record of the mussel commensal Branchipolynoe pettiboneae Miura & Hashimoto, 1991 is reported and described from the northern South China Sea, where for the first time the scale-worm is noted as occurring at a cold-seep. Keys to distinguish the species of Branchipolynoe and Lepidonotopodium are provided.

Eustachian tube patency

Science.gov (United States)

Eustachian tube patency refers to how much the eustachian tube is open. The eustachian tube runs between the middle ear and the throat. It controls the pressure behind the eardrum and middle ear space. This helps keep ...

Effect of tube-support interaction on the dynamic responses of heat exchanger tubes

International Nuclear Information System (INIS)

Shin, Y.S.; Jendrzejczyk, J.A.; Wambsganss, M.W.

1977-01-01

Operating heat exchangers have experienced tube damages due to excessive flow-induced vibration. The relatively small inherent tube-to-baffle hole clearances associated with manufacturing tolerances in heat exchangers affect the tube vibrational characteristics. In attempting a theoretical analysis, questions arise as to the effects of tube-baffle impacting on dynamic responses. Experiments were performed to determine the effects of tube-baffle impacting in vertical/horizontal tube orientation, and in air/water medium on the vibrational characteristics (resonant frequencies, mode shapes, and damping) and displacement response amplitudes of a seven-span tube model. The tube and support conditions were prototypic, and overall length approximately one-third that of a straight tube segment of the steam generator designed for the CRBR. The test results were compared with the analytical results based on the multispan beam with ''knife-edge'' supports

Annular gap measurement between pressure tube and calandria tube by eddy current technique

International Nuclear Information System (INIS)

Bhole, V.M.; Rastogi, P.K.; Kulkarni, P.G.

1992-01-01

In pressurised heavy water reactor (PHWR) major distinguishing feature is that there are number of identical fuel channels in the reactor core. Each channel consists of pressure tube of Zr-2.5 Nb or zircaloy-2 through which high temperature, high pressure primary coolant is passing. The pressure tube contains fuel. Surrounding the pressure tube there is low pressure, cool heavy water (moderator). The moderator is thermally separated from coolant by the tube which is nominally concentric with pressure tube called calandria tube. There are four garter springs in the annular gap between pressure tube and calandria tube. During the life of the reactor there are number of factors by which the pressure tube sags, most important factors are irradiation creep, thermal creep, fuel load etc. Because of the sag of pressure tube it can touch the calandria tube resulting in formation of cold spot. This leads to hydrogen concentration at that spot by which the material at that place becomes brittle and can lead to catastrophic failure of pressure tube. There is no useful access for measurement of annular gap either through the gas annular space or from exterior of calandria tube. So the annular gap was measured from inside surface of pressure tube which is accessible. Eddy current technique was used for finding the gap. The paper describe the details of split coil design of bobbin probe, selection of operating point on normalised impedance diagram by choosing frequency. Experimental results on full scale mock up, and actual gap measurement in reactor channel, are also given. (author). 7 figs

Categorising YouTube

DEFF Research Database (Denmark)

Simonsen, Thomas Mosebo

2011-01-01

This article provides a genre analytical approach to creating a typology of the User Generated Content (UGC) of YouTube. The article investigates the construction of navigation processes on the YouTube website. It suggests a pragmatic genre approach that is expanded through a focus on YouTube......’s technological affordances. Through an analysis of the different pragmatic contexts of YouTube, it is argued that a taxonomic understanding of YouTube must be analysed in regards to the vacillation of a user-driven bottom-up folksonomy and a hierarchical browsing system that emphasises a culture of competition...... and which favours the already popular content of YouTube. With this taxonomic approach, the UGC videos are registered and analysed in terms of empirically based observations. The article identifies various UGC categories and their principal characteristics. Furthermore, general tendencies of the UGC within...

Pressure tube type reactors

International Nuclear Information System (INIS)

Komada, Masaoki.

1981-01-01

Purpose: To increase the safety of pressure tube type reactors by providing an additional ECCS system to an ordinary ECCS system and injecting heavy water in the reactor core tank into pressure tubes upon fractures of the tubes. Constitution: Upon fractures of pressure tubes, reduction of the pressure in the fractured tubes to the atmospheric pressure in confirmed and the electromagnetic valve is operated to completely isolate the pressure tubes from the fractured portion. Then, the heavy water in the reactor core tank flows into and spontaneously recycles through the pressure tubes to cool the fuels in the tube to prevent their meltdown. By additionally providing the separate ECCS system to the ordinary ECCS system, fuels can be cooled upon loss of coolant accidents to improve the safety of the reactors. (Moriyama, K.)

Tube-in-shell heat exchangers

International Nuclear Information System (INIS)

Richardson, J.

1976-01-01

Tube-in-shell heat exchangers normally comprise a bundle of parallel tubes within a shell container, with a fluid arranged to flow through the tubes in heat exchange with a second fluid flowing through the shell. The tubes are usually end supported by the tube plates that separate the two fluids, and in use the tube attachments to the tube plates and the tube plates can be subject to severe stress by thermal shock and frequent inspection and servicing are required. Where the heat exchangers are immersed in a coolant such as liquid Na such inspection is difficult. In the arrangement described a longitudinally extending central tube is provided incorporating axially spaced cylindrical tube plates to which the opposite ends of the tubes are attached. Within this tube there is a tubular baffle that slidably seals against the wall of the tube between the cylindrical tube plates to define two co-axial flow ducts. These ducts are interconnected at the closed end of the tube by the heat exchange tubes and the baffle comprises inner and outer spaced walls with the interspace containing Ar. The baffle is easily removable and can be withdrawn to enable insertion of equipment for inspecting the wall of the tube and tube attachments and to facilitate plugging of defective tubes. Cylindrical tube plates are believed to be superior for carrying pressure loads and resisting the effects of thermal shock. Some protection against thermal shock can be effected by arranging that the secondary heat exchange fluid is on the tube side, and by providing a thermal baffle to prevent direct impingement of hot primary fluid on to the cylindrical tube plates. The inner wall of the tubular baffle may have flexible expansible region. Some nuclear reactor constructions incorporating such an arrangement are described, including liquid metal reactors. (U.K.)

Heat exchanger tube tool

International Nuclear Information System (INIS)

Gugel, G.

1976-01-01

Certain types of heat-exchangers have tubes opening through a tube sheet to a manifold having an access opening offset from alignment with the tube ends. A tool for inserting a device, such as for inspection or repair, is provided for use in such instances. The tool is formed by a flexible guide tube insertable through the access opening and having an inner end provided with a connector for connection with the opening of the tube in which the device is to be inserted, and an outer end which remains outside of the chamber, the guide tube having adequate length for this arrangement. A flexible transport hose for internally transporting the device slides inside of the guide tube. This hose is long enough to slide through the guide tube, into the heat-exchanger tube, and through the latter to the extent required for the use of the device. The guide tube must be bent to reach the end of the heat-exchanger tube and the latter may be constructed with a bend, the hose carrying anit-friction elements at interspaced locations along its length to make it possible for the hose to negotiate such bends while sliding to the location where the use of the device is required

Observation of "YouTube" Language Learning Videos ("YouTube" LLVS)

Science.gov (United States)

Alhamami, Munassir

2013-01-01

This paper navigates into the "YouTube" website as one of the most usable online tools to learn languages these days. The paper focuses on two issues in creating "YouTube" language learning videos: pedagogy and technology. After observing the existing "YouTube" LLVs, the study presents a novel rubric that is directed…

Worm control practice against gastro-intestinal parasites in Norwegian sheep and goat flocks

Science.gov (United States)

2011-01-01

Background Anthelmintic treatment is the most common way of controlling nematode infections in ruminants. However, several countries have reported anthelmintic resistance (AR), representing a limitation for sustainable small ruminant production. The knowledge regarding worm control management represents a baseline to develop a guideline for preventing AR. The aim of the present study was therefore to improve our knowledge about the worm control practices in small ruminant flocks in Norway. Methods A questionnaire survey regarding worm control practices was performed in small ruminant flocks in Norway. Flocks were selected from the three main areas of small ruminant farming, i.e. the coastal, inland and northern areas. A total of 825 questionnaires, comprising 587 sheep flocks (return rate of 51.3%) and 238 goat flocks (52.6%) were included. Results The results indicated that visual appraisal of individual weight was the most common means of estimating the anthelmintic dose used in sheep (78.6%) and goat (85.1%) flocks. The mean yearly drenching rate in lambs and ewes were 2.5 ± 1.7 and 1.9 ± 1.1, respectively, whereas it was 1.0 (once a year) in goats. However, these figures were higher in sheep in the coastal area with a rate of 3.4 and 2.2 in lambs and ewes, respectively. Benzimidazoles were the predominant anthelmintic class used in sheep flocks (64.9% in 2007), whereas benzimidazoles and macrocyclic lactones were both equally used in dairy goat flocks. In the period of 2005-2007, 46.3% of the sheep flocks never changed the anthelmintic class. The dose and move strategy was practiced in 33.2% of the sheep flocks. Conclusions The present study showed that inaccurate weight calculation gives a risk of under-dosing in over 90% of the sheep and goat flocks in Norway. Taken together with a high treatment frequency in lambs, a lack of anthelmintic class rotation and the common use of a dose-and-move strategy, a real danger for development of anthelmintic resistance

Worm control practice against gastro-intestinal parasites in Norwegian sheep and goat flocks

Directory of Open Access Journals (Sweden)

Vatn Synnøve

2011-05-01

Full Text Available Abstract Background Anthelmintic treatment is the most common way of controlling nematode infections in ruminants. However, several countries have reported anthelmintic resistance (AR, representing a limitation for sustainable small ruminant production. The knowledge regarding worm control management represents a baseline to develop a guideline for preventing AR. The aim of the present study was therefore to improve our knowledge about the worm control practices in small ruminant flocks in Norway. Methods A questionnaire survey regarding worm control practices was performed in small ruminant flocks in Norway. Flocks were selected from the three main areas of small ruminant farming, i.e. the coastal, inland and northern areas. A total of 825 questionnaires, comprising 587 sheep flocks (return rate of 51.3% and 238 goat flocks (52.6% were included. Results The results indicated that visual appraisal of individual weight was the most common means of estimating the anthelmintic dose used in sheep (78.6% and goat (85.1% flocks. The mean yearly drenching rate in lambs and ewes were 2.5 ± 1.7 and 1.9 ± 1.1, respectively, whereas it was 1.0 (once a year in goats. However, these figures were higher in sheep in the coastal area with a rate of 3.4 and 2.2 in lambs and ewes, respectively. Benzimidazoles were the predominant anthelmintic class used in sheep flocks (64.9% in 2007, whereas benzimidazoles and macrocyclic lactones were both equally used in dairy goat flocks. In the period of 2005-2007, 46.3% of the sheep flocks never changed the anthelmintic class. The dose and move strategy was practiced in 33.2% of the sheep flocks. Conclusions The present study showed that inaccurate weight calculation gives a risk of under-dosing in over 90% of the sheep and goat flocks in Norway. Taken together with a high treatment frequency in lambs, a lack of anthelmintic class rotation and the common use of a dose-and-move strategy, a real danger for development of

Giant kidney worm (Dioctophyma renale) infection mimicking retroperitoneal neoplasm.

Science.gov (United States)

Sun, T; Turnbull, A; Lieberman, P H; Sternberg, S S

1986-07-01

A 50-year-old Chinese man was found by ultrasound and computed tomography to have a retroperitoneal mass in the right upper quadrant of the abdomen. At operation, a hemorrhagic cyst was detected at the upper pole of the right kidney adjacent to the adrenal gland. Microscopic examination revealed that the cyst wall was composed of granulomatous tissue loaded with eggs and cross-sections of parasites, identified as Dioctophyma renale. The eggs were characterized by a birefringent striated double wall. The presence of cross sections of adult worms of D. renale in human tissue has not been previously described. Another unique feature of this case was that the right kidney was intact, as examined grossly at laparotomy and by intravenous pyelography. Eggs were not detected in the urine.

Seasonal evolution of faecal egg output by gastrointestinal worms in goats on communal farms in eastern Namibia

Directory of Open Access Journals (Sweden)

F.F. Kumba

2003-11-01

Full Text Available As a more detailed continuation of a previous study, faecal samples for worm egg counts were collected per rectum from ten marked adult animals in selected flocks of goats, in each of six villages evenly spread out in the communal farming district of Okakarara in eastern Namibia. The study was conducted on a monthly basis from August 1999 to July 2000. Average faecal worm egg counts (FECs were highest during the warm-wet season, much lower during the cold-dry months and moderate during the hot-dry season. Least square means of FECs were 2 140, 430 and 653 per gram of faeces for the three seasons, respectively. Seasonal variation in egg counts was significant (P < 0.0001. Gastrointestinal strongyles, and to a lesser extent Strongyloides species, were the predominant parasite groups identified in goats. Kidding rates peaked in the cold-dry season and mortality rates in the hot-dry season. Results of this study suggest that gastrointestinal parasitism may be a problem that accentuates the effect of poor nutrition on small ruminants during the season of food shortages in the east of Namibia and that the use of FECs per se to assess the severity of gastrointestinal parasitic infection in goats followed by chemoprophylactic strategic and / or tactical treatment, may not be the best approach to addressing the worm problem under resource-poor conditions. The use of the FAMACHA(c system that identifies severely affected animals for treatment is technically a better option for communal farmers.

One-step solvothermal synthesis, a worm-shaped morphology and luminescence properties of green-emitting Y2O2S:Tb3+ nanophosphors

Science.gov (United States)

Liu, Fan; Lian, Jingbao; Wu, Nianchu; He, Jiao; Zhang, Xue; Liu, Feng

2018-02-01

The worm-shaped Y2O2S:Tb3+ nanophosphors have been successfully prepared via one-step solvothermal synthesis, using ethanediamine as the main solvent and sublimed sulfur powder as the source of sulfur without adding additional structure-directing reagents. XRD, FT-IR, FESEM, PL and CIE chromaticity diagram were used to characterize the obtained products. XRD results demonstrate that all diffraction peaks of the sample can be well indexed to pure hexagonal phase of Y2O2S with optimal condition, i.e. the molar ration of S/Y3+m = 10, solvothermal temperature T = 220 °C and synthetic time t = 24 h. When t varies from 2 h to 24 h, the morphology of Y2O2S transforms from cauliflower-like structure to worm-shaped nanoparticles with the length of ∼80 nm. The formation mechanism depending on t has also been proposed. Upon 250 nm ultraviolet (UV) light excitation, the worm-shaped Y2O2S:Tb3+ nanophosphors exhibit green emissions, corresponding to the 5D4 → 7FJ (J = 6, 5, 4, 3) transitions of Tb3+ions. The quenching concentration is 7% and its corresponding lifetime is 1216 μs. The CIE chromaticity coordinates show the tuneable emission shifting from yellow green to yellowish green with increasing concentration of Tb3+ions from 1% to 7%. Those results suggest that the worm-shaped Y2O2S:Tb3+ nanophosphors may have potential applications in X-ray intensifying screens, fluorescence and biomedical fields.

Helically coiled tube heat exchanger

International Nuclear Information System (INIS)

Harris, A.M.

1981-01-01

In a heat exchanger such as a steam generator for a nuclear reactor, two or more bundles of helically coiled tubes are arranged in series with the tubes in each bundle integrally continuing through the tube bundles arranged in series therewith. Pitch values for the tubing in any pair of tube bundles, taken transverse to the path of the reactor coolant flow about the tubes, are selected as a ratio of two unequal integers to permit efficient operation of each tube bundle while maintaining the various tube bundles of the heat exchanger within a compact envelope. Preferably, the helix angle and tube pitch parallel to the path of coolant flow are constant for all tubes in a single bundle so that the tubes are of approximately the same length within each bundle

Categorising YouTube

OpenAIRE

Simonsen, Thomas Mosebo

2011-01-01

This article provides a genre analytical approach to creating a typology of the User Generated Content (UGC) of YouTube. The article investigates the construction of navigation processes on the YouTube website. It suggests a pragmatic genre approach that is expanded through a focus on YouTube’s technological affordances. Through an analysis of the different pragmatic contexts of YouTube, it is argued that a taxonomic understanding of YouTube must be analysed in regards to the vacillation of a...

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... YouTube Videos » NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration ... Retinopathy of Prematurity Science Spanish Videos Webinars NEI YouTube Videos: Amblyopia Embedded video for NEI YouTube Videos: ...

Effect of Tube Pitch on Pool Boiling Heat Transfer of Vertical Tube Bundle

International Nuclear Information System (INIS)

Kang, Myeong Gie

2016-01-01

Summarizing the previous results it can be stated that heat transfer coefficients are highly dependent on the tube pitch and the heat flux of the relevant tube. The published results are mostly about the horizontal tubes. However, there are many heat exchangers consisting of vertical tubes like AP600. Therefore, the focus of the present study is an identification of the effects of a tube pitch as well as the heat flux of a relevant tube on the heat transfer of a tube bundle installed vertically. When the heat flux is increased many bubbles are generating due to the increase of the nucleation sites. The bubbles become coalescing with the nearby bubbles and generates big bunches of bubbles on the tube surface. This prevents the access of the liquid to the surface and deteriorates heat transfer. The bubble coalescence is competing with the mechanisms enhancing heat transfer. The pitch was varied from 28.5 mm to 95 mm and the heat flux of the nearby tube was changed from 0 to 90kW/m"2. The enhancement of the heat transfer is clearly observed when the heat flux of the nearby tube becomes larger and the heat flux of the upper tube is less than 40kW/m"2. The effect of the tube pitch on heat transfer is negligible as the value of DP/ is increased more than 4.

Optimizing Tube Precurvature to Enhance Elastic Stability of Concentric Tube Robots.

Science.gov (United States)

Ha, Junhyoung; Park, Frank C; Dupont, Pierre E

2017-02-01

Robotic instruments based on concentric tube technology are well suited to minimally invasive surgery since they are slender, can navigate inside small cavities and can reach around sensitive tissues by taking on shapes of varying curvature. Elastic instabilities can arise, however, when rotating one precurved tube inside another. In contrast to prior work that considered only tubes of piecewise constant precurvature, we allow precurvature to vary along the tube's arc length. Stability conditions for a planar tube pair are derived and used to formulate an optimal design problem. An analytic formulation of the optimal precurvature function is derived that achieves a desired tip orientation range while maximizing stability and respecting bending strain limits. This formulation also includes straight transmission segments at the proximal ends of the tubes. The result, confirmed by both numerical and physical experiment, enables designs with enhanced stability in comparison to designs of constant precurvature.

A Method to Establishing Tube Plugging Criterion for Heat Exchangers with Straight Tubes

Energy Technology Data Exchange (ETDEWEB)

Kim, Hyungnam [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

The difference of thermal expansion coefficients between the shell and tube materials causes the stress in axial direction of tube. Because of the axial stress due to thermal load, the straight tubes are used for heat exchangers operated in low temperature such as CCW (Component Cooling Water) heat exchangers and condensers. It is inevitable for the materials of the components to be degraded as the power plants become older. The degradation accompanies increasing maintenance cost as well as creating safety issues. The materials and wall thickness of heat exchanger tubes in nuclear power plants are selected to withstand system temperature, pressure, and corrosion. There are many codes and standards to be referred for calculating the minimum thickness of the heat exchanger tube in the designing stage. However, the codes and standards related to show the tube plugging criteria may not exist currently. In this paper, a method to establish the tube plugging criteria of BOP heat exchangers, which is based on the USNRC Regulatory Guide 1.121, is introduced and the tube plugging criteria for the TPCCW heat exchanger of Yonggwang NPP No. 1 and 2. A method to establish the tube plugging criteria of heat exchangers with straight tubes are introduced based on the USNRC Regulatory Guide 1.121. As an example, the tube plugging criterion for the CCW heat exchanger of a nuclear power plant is provided.

Automation in tube finishing bay

International Nuclear Information System (INIS)

Bhatnagar, Prateek; Satyadev, B.; Raghuraman, S.; Syama Sundara Rao, B.

1997-01-01

Automation concept in tube finishing bay, introduced after the final pass annealing of PHWR tubes resulted in integration of number of sub-systems in synchronisation with each other to produce final cut fuel tubes of specified length, tube finish etc. The tube finishing bay which was physically segregated into four distinct areas: 1. tube spreader and stacking area, 2. I.D. sand blasting area, 3. end conditioning, wad blowing, end capping and O.D. wet grinding area, 4. tube inspection, tube cutting and stacking area has been studied

CRL X-ray tube

International Nuclear Information System (INIS)

Kolchevsky, N.N.; Petrov, P.V.

2015-01-01

A novel types of X-ray tubes with refractive lenses are proposed. CRL-R X-ray tube consists of Compound Refractive Lens- CRL and Reflection X-ray tube. CRL acts as X-ray window. CRL-T X-ray consists of CRL and Transmission X-ray tube. CRL acts as target for electron beam. CRL refractive lens acts as filter, collimator, waveguide and focusing lens. Properties and construction of the CRL X-ray tube are discussed. (authors)

Comparison of various extraction techniques for the determination of polycyclic aromatic hydrocarbons in worms.

Science.gov (United States)

Mooibroek, D; Hoogerbrugge, R; Stoffelsen, B H G; Dijkman, E; Berkhoff, C J; Hogendoorn, E A

2002-10-25

Two less laborious extraction methods, viz. (i) a simplified liquid extraction using light petroleum or (ii) microwave-assisted solvent extraction (MASE), for the analysis of polycyclic aromatic hydrocarbons (PAHs) in samples of the compost worm Eisenia andrei, were compared with a reference method. After extraction and concentration, analytical methodology consisted of a cleanup of (part) of the extract with high-performance gel permeation chromatography (HPGPC) and instrumental analysis of 15 PAHs with reversed-phase liquid chromatography with fluorescence detection (RPLC-FLD). Comparison of the methods was done by analysing samples with incurred residues (n=15, each method) originating from an experiment in which worms were exposed to a soil contaminated with PAHs. Simultaneously, the performance of the total lipid determination of each method was established. Evaluation of the data by means of principal component analysis (PCA) and analysis of variance (ANOVA) revealed that the performance of the light petroleum method for both the extraction of PAHs (concentration range 1-30 ng/g) and lipid content corresponds very well with the reference method. Compared to the reference method, the MASE method yielded somewhat lower concentrations for the less volatile PAHs, e.g., dibenzo[ah]anthracene and benzo[ghi]perylene and provided a significant higher amount of co-extracted material.

Antischistosomal activity of a calcium channel antagonist on schistosomula and adult Schistosoma mansoni worms

Directory of Open Access Journals (Sweden)

Vanessa Silva-Moraes

2013-08-01

Full Text Available Current schistosomiasis control strategies are largely based on chemotherapeutic agents and a limited number of drugs are available today. Praziquantel (PZQ is the only drug currently used in schistosomiasis control programs. Unfortunately, this drug shows poor efficacy in patients during the earliest infection phases. The effects of PZQ appear to operate on the voltage-operated Ca2+channels, which are located on the external Schistosoma mansoni membrane. Because some Ca2+channels have dihydropyridine drug class (a class that includes nifedipine sensitivity, an in vitro analysis using a calcium channel antagonist (clinically used for cardiovascular hypertension was performed to determine the antischistosomal effects of nifedipine on schistosomula and adult worm cultures. Nifedipine demonstrated antischistosomal activity against schistosomula and significantly reduced viability at all of the concentrations used alone or in combination with PZQ. In contrast, PZQ did not show significant efficacy when used alone. Adult worms were also affected by nifedipine after a 24 h incubation and exhibited impaired motility, several lesions on the tegument and intense contractility. These data support the idea of Ca2+channels subunits as drug targets and favour alternative therapeutic schemes when drug resistance has been reported. In this paper, strong arguments encouraging drug research are presented, with a focus on exploring schistosomal Ca2+channels.

Pediatric cuffed endotracheal tubes

Directory of Open Access Journals (Sweden)

Neerja Bhardwaj

2013-01-01

Full Text Available Endotracheal intubation in children is usually performed utilizing uncuffed endotracheal tubes for conduct of anesthesia as well as for prolonged ventilation in critical care units. However, uncuffed tubes may require multiple changes to avoid excessive air leak, with subsequent environmental pollution making the technique uneconomical. In addition, monitoring of ventilatory parameters, exhaled volumes, and end-expiratory gases may be unreliable. All these problems can be avoided by use of cuffed endotracheal tubes. Besides, cuffed endotracheal tubes may be of advantage in special situations like laparoscopic surgery and in surgical conditions at risk of aspiration. Magnetic resonance imaging (MRI scans in children have found the narrowest portion of larynx at rima glottides. Cuffed endotracheal tubes, therefore, will form a complete seal with low cuff pressure of <15 cm H 2 O without any increase in airway complications. Till recently, the use of cuffed endotracheal tubes was limited by variations in the tube design marketed by different manufacturers. The introduction of a new cuffed endotracheal tube in the market with improved tracheal sealing characteristics may encourage increased safe use of these tubes in clinical practice. A literature search using search words "cuffed endotracheal tube" and "children" from 1980 to January 2012 in PUBMED was conducted. Based on the search, the advantages and potential benefits of cuffed ETT are reviewed in this article.

Pressure tube type research reactor

International Nuclear Information System (INIS)

Ueda, Hiroshi.

1976-01-01

Object: To prevent excessive heat generation due to radiation of a pressure tube vessel. Structure: A pressure tube encasing therein a core comprises a dual construction comprising inner and outer tubes coaxially disposed. High speed cooling water is passed through the inner tube for cooling. In addition, in the outer periphery of said outer tube there is provided a forced cooling tube disposed coaxially thereto, into which cooling fluid, for example, such as moderator or reflector is forcibly passed. This forced cooling tube has its outer periphery surrounded by the vessel into which moderator or reflector is fed. By the provision of the dual construction of the pressure tube and the forced cooling tube, the vessel may be prevented from heat generation. (Ikeda, J.)

Giant kidney worms in a patient with renal cell carcinoma.

Science.gov (United States)

Kuehn, Jemima; Lombardo, Lindsay; Janda, William M; Hollowell, Courtney M P

2016-03-07

Dioctophyma renale (D. renale), or giant kidney worms, are the largest nematodes that infect mammals. Approximately 20 cases of human infection have been reported. We present a case of a 71-year-old man with a recent history of unintentional weight loss and painless haematuria, passing elongated erythematous tissue via his urethra. CT revealed a left renal mass with pulmonary nodules and hepatic lesions. On microscopy, the erythematous tissue passed was identified as D. renale. On subsequent renal biopsy, pathology was consistent with renal cell carcinoma. This is the first reported case of concomitant D. renale infection and renal cell carcinoma, and the second reported case of D. renale infection of the left kidney alone. 2016 BMJ Publishing Group Ltd.

Streak tube development

International Nuclear Information System (INIS)

Hinrichs, C.K.; Estrella, R.M.

1979-01-01

A research program for the development of a high-speed, high-resolution streak image tube is described. This is one task in the development of a streak camera system with digital electronic readout, whose primary application is for diagnostics in underground nuclear testing. This program is concerned with the development of a high-resolution streak image tube compatible with x-ray input and electronic digital output. The tube must be capable of time resolution down to 100 psec and spatial resolution to provide greater than 1000 resolution elements across the cathode (much greater than presently available). Another objective is to develop the capability to make design changes in tube configurations to meet different experimental requirements. A demountable prototype streak tube was constructed, mounted on an optical bench, and placed in a vacuum system. Initial measurements of the tube resolution with an undeflected image show a resolution of 32 line pairs per millimeter over a cathode diameter of one inch, which is consistent with the predictions of the computer simulations. With the initial set of unoptmized deflection plates, the resolution pattern appeared to remain unchanged for static deflections of +- 1/2-inch, a total streak length of one inch, also consistent with the computer simulations. A passively mode-locked frequency-doubled dye laser is being developed as an ultraviolet pulsed light source to measure dynamic tube resolution during streaking. A sweep circuit to provide the deflection voltage in the prototype tube has been designed and constructed and provides a relatively linear ramp voltage with ramp durations adjustable between 10 and 1000 nsec

Parasitic worms: knowledge, attitudes, and practices in Western Côte d'Ivoire with implications for integrated control.

Directory of Open Access Journals (Sweden)

Cinthia A Acka

Full Text Available BACKGROUND: In the developing world where parasitic worm infections are pervasive, preventive chemotherapy is the key strategy for morbidity control. However, local knowledge, attitudes, and practices (KAP of parasitic worms are poorly understood, although such information is required for prevention and sustainable control. METHODS: We carried out KAP surveys in two rural communities of Côte d'Ivoire that were subjected to school-based and community-based research and control activities. We used qualitative and quantitative methods. The former included observations, in-depth interviews with key informants, and focus group discussions with school children and adults. Quantitative methods consisted of a structured questionnaire administered to household heads. PRINCIPAL FINDINGS: Access to clean water was lacking in both communities and only a quarter of the households had functioning latrines. There was a better understanding of soil-transmitted helminthiasis than intestinal schistosomiasis, but community-based rather than school-based interventions appeared to improve knowledge of schistosomiasis. In the villages with community-based interventions, three-quarters of household interviewees knew about intestinal schistosomiasis compared to 14% in the village where school-based interventions were implemented (P<0.001. Whereas two-thirds of respondents from the community-based intervention village indicated that the research and control project was the main source of information, only a quarter of the respondents cited the project as the main source. CONCLUSIONS/SIGNIFICANCE: Preventive chemotherapy targeting school-aged children has limitations, as older population segments are neglected, and hence lack knowledge about how to prevent and control parasitic worm infections. Improved access to clean water and sanitation is necessary, along with health education to make a durable impact against helminth infections.

Earthworm effects without earthworms: inoculation of raw organic matter with worm-worked substrates alters microbial community functioning.

Science.gov (United States)

Aira, Manuel; Domínguez, Jorge

2011-01-27

Earthworms are key organisms in organic matter decomposition because of the interactions they establish with soil microorganisms. They enhance decomposition rates through the joint action of direct effects (i.e. effects due to direct earthworm activity such as digestion, burrowing, etc) and indirect effects (i.e. effects derived from earthworm activities such as cast ageing). Here we test whether indirect earthworm effects affect microbial community functioning in the substrate, as when earthworms are present (i. e., direct effects). To address these questions we inoculated fresh organic matter (pig manure) with worm-worked substrates (vermicompost) produced by three different earthworm species. Two doses of each vermicompost were used (2.5 and 10%). We hypothesized that the presence of worm-worked material in the fresh organic matter will result in an inoculum of different microorganisms and nutrients. This inoculum should interact with microbial communities in fresh organic matter, thus promoting modifications similar to those found when earthworms are present. Inoculation of worm-worked substrates provoked significant increases in microbial biomass and enzyme activities (β-glucosidase, cellulase, phosphatase and protease). These indirect effects were similar to, although lower than, those obtained in pig manure with earthworms (direct and indirect earthworm effects). In general, the effects were not dose-dependent, suggesting the existence of a threshold at which they were triggered. Our data reveal that the relationships between earthworms and microorganisms are far from being understood, and suggest the existence of several positive feedbacks during earthworm activity as a result of the interactions between direct and indirect effects, since their combination produces stronger modifications to microbial biomass and enzyme activity.

Earthworm effects without earthworms: inoculation of raw organic matter with worm-worked substrates alters microbial community functioning.

Directory of Open Access Journals (Sweden)

Manuel Aira

Full Text Available BACKGROUND: Earthworms are key organisms in organic matter decomposition because of the interactions they establish with soil microorganisms. They enhance decomposition rates through the joint action of direct effects (i.e. effects due to direct earthworm activity such as digestion, burrowing, etc and indirect effects (i.e. effects derived from earthworm activities such as cast ageing. Here we test whether indirect earthworm effects affect microbial community functioning in the substrate, as when earthworms are present (i. e., direct effects. METHODOLOGY/PRINCIPAL FINDINGS: To address these questions we inoculated fresh organic matter (pig manure with worm-worked substrates (vermicompost produced by three different earthworm species. Two doses of each vermicompost were used (2.5 and 10%. We hypothesized that the presence of worm-worked material in the fresh organic matter will result in an inoculum of different microorganisms and nutrients. This inoculum should interact with microbial communities in fresh organic matter, thus promoting modifications similar to those found when earthworms are present. Inoculation of worm-worked substrates provoked significant increases in microbial biomass and enzyme activities (β-glucosidase, cellulase, phosphatase and protease. These indirect effects were similar to, although lower than, those obtained in pig manure with earthworms (direct and indirect earthworm effects. In general, the effects were not dose-dependent, suggesting the existence of a threshold at which they were triggered. CONCLUSION/SIGNIFICANCE: Our data reveal that the relationships between earthworms and microorganisms are far from being understood, and suggest the existence of several positive feedbacks during earthworm activity as a result of the interactions between direct and indirect effects, since their combination produces stronger modifications to microbial biomass and enzyme activity.

Technique employed to seal a tube leaking in a heat exchanger of the tube type by explosives with supporting means for the adjacent tubes

International Nuclear Information System (INIS)

Larson, G.C.

1978-01-01

This invention concerns the technique employed to seal a tube leaking in a heat exchanger of the tube and tube plate type by detonating metal plugs activated by an explosive and inserted in both ends of the tube. It refers in particular to an apparatus and process in which the deformation or distortion of the adjacent tubes and tube plate ties under the effect of the explosive forces is significantly reduced [fr

Biomonitoring in a clean and a multi-contaminated estuary based on biomarkers and chemical analyses in the endobenthic worm Nereis diversicolor

Energy Technology Data Exchange (ETDEWEB)

Durou, Cyril [CNRS, Universite de Nantes, Pole Mer et Littoral, SMAB, 2 rue de la Houssiniere, BP 92208, F-44322 Nantes Cedex 3 (France) and Institut de Biologie et Ecologie Appliquees, CEREA, Universite Catholique de l' Ouest, 44 rue Rabelais, 49008 Angers Cedex 01 (France)]. E-mail: cyril.durou@uco.fr; Poirier, Laurence [CNRS, Universite de Nantes, Pole Mer et Littoral, SMAB, 2 rue de la Houssiniere, BP 92208, F-44322 Nantes Cedex 3 (France); Amiard, Jean-Claude [CNRS, Universite de Nantes, Pole Mer et Littoral, SMAB, 2 rue de la Houssiniere, BP 92208, F-44322 Nantes Cedex 3 (France); Budzinski, Helene [CNRS UMR 5472, LPTC, Universite de Bordeaux I, 33405 Talence (France); Gnassia-Barelli, Mauricette [UMR INRA UNSA 1112 ROSE, Faculte des Sciences, BP 71, 06108 Nice Cedex 2 (France); Lemenach, Karyn [CNRS UMR 5472, LPTC, Universite de Bordeaux I, 33405 Talence (France); Peluhet, Laurent [CNRS UMR 5472, LPTC, Universite de Bordeaux I, 33405 Talence (France); Mouneyrac, Catherine [CNRS, Universite de Nantes, Pole Mer et Littoral, SMAB, 2 rue de la Houssiniere, BP 92208, F-44322 Nantes Cedex 3 (France); Institut de Biologie et Ecologie Appliquees, CEREA, Universite Catholique de l' Ouest, 44 rue Rabelais, 49008 Angers Cedex 01 (France); Romeo, Michele [UMR INRA UNSA 1112 ROSE, Faculte des Sciences, BP 71, 06108 Nice Cedex 2 (France); Amiard-Triquet, Claude [CNRS, Universite de Nantes, Pole Mer et Littoral, SMAB, 2 rue de la Houssiniere, BP 92208, F-44322 Nantes Cedex 3 (France)

2007-07-15

Relationships between biochemical and physiological biomarkers (acetylcholinesterase [AChE], catalase, and glutathione S-transferase [GST] activities, thiobarbituric acid reactive substances, glycogen, lipids and proteins) and accumulated concentrations of contaminants (polychlorinated biphenyls [PCBs], polycyclic aromatic hydrocarbons and metals) were examined in the keystone species Nereis diversicolor. The chemical analyses of worms and sediments allowed the designation of the Seine estuary and the Authie estuary as a polluted and relatively clean site respectively. Worms from the Seine estuary exhibited higher GST and lower AChE activities. Generally, larger worms had higher concentrations of energy reserves. Principal component analyses clearly highlighted intersite differences: in the first plan, GST activities and chemical concentrations were inversely related to concentrations of energy reserves; in the second one, PCB concentrations and AChE activity were inversely related. Depleted levels of energy reserves could be a consequence of combating toxicants and might predict effects at higher levels of biological organization. The use of GST and AChE activities and energy reserve concentrations as biomarkers is validated in the field in this keystone species. - The use of N. diversicolor as a biomonitor of environmental quality via the measurement of biomarkers and accumulated concentrations of contaminants is validated in the field.

Steam generator tube performance

International Nuclear Information System (INIS)

Tatone, O.S.; Pathania, R.S.

1983-08-01

A review of the performance of steam generator tubes in 110 water-cooled nuclear power reactors showed that tubes were plugged at 46 (42 percent) of the reactors. The number of tubes removed from service increased from 1900 (0.14 percent) in 1980 to 4692 (0.30 percent) in 1981. The leading causes of tube failures were stress corrosion cracking from the primary side, stress corrosion cracking (or intergranular attack) from the secondary side and pitting corrosion. The lowest incidence of corrosion-induced defects from the secondary side occurred in reactors that used all-volatile treatment since start-up. At one reactor a large number of degraded tubes were repaired by sleeving which is expected to become an important method of tube repair in the future

Study on antioxidant experiment on forged steel tube sheet and tube hole for steam generator

International Nuclear Information System (INIS)

Zong Hai; Wang Detai; Ding Yang

2012-01-01

Antioxidant experiment on forged steel tube sheet and tube hole for steam generator was studied and the influence of different simulated heat treatments on the antioxidant performance of tube sheet and tube hole was made. The influence of different antioxidant methods on the size of tube hole was drawn. Furthermore, the change of size and weight of 18MnD5 forged steel tube sheet on the condition of different simulated heat treatments was also studied. The analytical results have proved reference information for the use of 18MnD5 material and for key processes of processing tube hole and wearing and expanding U-style tube. (authors)

WormGUIDES: an interactive single cell developmental atlas and tool for collaborative multidimensional data exploration.

Science.gov (United States)

Santella, Anthony; Catena, Raúl; Kovacevic, Ismar; Shah, Pavak; Yu, Zidong; Marquina-Solis, Javier; Kumar, Abhishek; Wu, Yicong; Schaff, James; Colón-Ramos, Daniel; Shroff, Hari; Mohler, William A; Bao, Zhirong

2015-06-09

Imaging and image analysis advances are yielding increasingly complete and complicated records of cellular events in tissues and whole embryos. The ability to follow hundreds to thousands of cells at the individual level demands a spatio-temporal data infrastructure: tools to assemble and collate knowledge about development spatially in a manner analogous to geographic information systems (GIS). Just as GIS indexes items or events based on their spatio-temporal or 4D location on the Earth these tools would organize knowledge based on location within the tissues or embryos. Developmental processes are highly context-specific, but the complexity of the 4D environment in which they unfold is a barrier to assembling an understanding of any particular process from diverse sources of information. In the same way that GIS aids the understanding and use of geo-located large data sets, software can, with a proper frame of reference, allow large biological data sets to be understood spatially. Intuitive tools are needed to navigate the spatial structure of complex tissue, collate large data sets and existing knowledge with this spatial structure and help users derive hypotheses about developmental mechanisms. Toward this goal we have developed WormGUIDES, a mobile application that presents a 4D developmental atlas for Caenorhabditis elegans. The WormGUIDES mobile app enables users to navigate a 3D model depicting the nuclear positions of all cells in the developing embryo. The identity of each cell can be queried with a tap, and community databases searched for available information about that cell. Information about ancestry, fate and gene expression can be used to label cells and craft customized visualizations that highlight cells as potential players in an event of interest. Scenes are easily saved, shared and published to other WormGUIDES users. The mobile app is available for Android and iOS platforms. WormGUIDES provides an important tool for examining developmental

Characterization of Friction Stir Welded Tubes by Means of Tube Bulge Test

International Nuclear Information System (INIS)

D'Urso, G.; Longo, M.; Giardini, C.

2011-01-01

Mechanical properties of friction stir welded joints are generally evaluated by means of conventional tensile test. This testing method might provide insufficient information because maximum strain obtained in tensile test before necking is small; moreover, the application of tensile test is limited when the joint path is not linear or even when the welds are executed on curved surfaces. Therefore, in some cases, it would be preferable to obtain the joints properties from other testing methods. Tube bulge test can be a valid solution for testing circumferential or longitudinal welds executed on tubular workpieces. The present work investigates the mechanical properties and the formability of friction stir welded tubes by means of tube bulge tests. The experimental campaign was performed on tubular specimens having a thickness of 3 mm and an external diameter of 40 mm, obtained starting from two semi-tubes longitudinally friction stir welded. The first step, regarding the fabrication of tubes, was performed combining a conventional forming process and friction stir welding. Sheets in Al-Mg-Si-Cu alloy AA6060 T6 were adopted for this purpose. Plates having a dimension of 225x60 mm were bent (with a bending axis parallel to the main dimension) in order to obtain semi-tubes. A particular care was devoted to the fabrication of forming devices (punch and die) in order to minimize the springback effects. Semi-tubes were then friction stir welded by means of a CNC machine tool. Some preliminary tests were carried out by varying the welding parameters, namely feed rate and rotational speed. A very simple tool having flat shoulder and cylindrical pin was used. The second step of the research was based on testing the welded tubes by means of tube bulge test. A specific equipment having axial actuators with a conical shape was adopted for this study. Some analyses were carried out on the tubes bulged up to a certain pressure level. In particular, the burst pressure and the

Heat exchanger with layers of helical tubes provided with improved tube supports

International Nuclear Information System (INIS)

Carnoy, M.; Mathieu, B.; Renaux, C.

1986-01-01

The present heat exchanger comprises coaxial layers of helically wound tubes; these tubes are supported by support plates, each comprising a row of perforations through which the tubes of a same layer pass. Truncated sleeves are in compression around the tubes within the perforations and mounted on the support plates. Pins fix the plates of different layers together against transverse movement but allowing radial movement. The present invention finds an application with nuclear reactor steam generators [fr

Pressure tube reactor

International Nuclear Information System (INIS)

Seki, Osamu; Kumasaka, Katsuyuki.

1988-01-01

Purpose: To remove the heat of reactor core using a great amount of moderators at the periphery of the reactor core as coolants. Constitution: Heat of a reactor core is removed by disposing a spontaneous recycling cooling device for cooling moderators in a moderator tank, without using additional power driven equipments. That is, a spontaneous recycling cooling device for cooling the moderators in the moderator tank is disposed. Further, the gap between the inner wall of a pressure tube guide pipe disposed through the vertical direction of a moderator tank and the outer wall of a pressure tube inserted through the guide pipe is made smaller than the rupture distortion caused by the thermal expansion upon overheating of the pressure tube and greater than the minimum gap required for heat shiels between the pressure tube and the pressure tube guide pipe during usual operation. In this way, even if such an accident as can not using a coolant cooling device comprising power driven equipment should occur in the pressure tube type reactor, the rise in the temperature of the reactor core can be retarded to obtain a margin with time. (Kamimura, M.)

An in-tube radar for detecting cracks in metal tubing

International Nuclear Information System (INIS)

Caffey, Thurlow W. H.; Nassersharif, Bahram; Garcia, Gabe V.; Smith, Phillip R.; Jedlicka, Russell P.; Hensel, Edward C.

2000-01-01

A major cause of failures in heat exchangers and steam generators in nuclear power plants is degradation of the tubes within them. The tube failure is often caused by the development of cracks that begin on the outer surface of the tube and propagate both inwards and laterally. A new technique will be described for detection of defects using a continuous-wave radar device within metal tubing. The technique is 100% volumetric, and may find smaller defects, find them more rapidly, and find them less expensively than present methods. Because this project was started only recently, there is no demonstrated performance to report so far. However, the basic engineering concepts will be presented together with a description of the milestone tasks and dates

Expansion lyre-shaped tube

International Nuclear Information System (INIS)

Andro, Jean.

1973-01-01

The invention relates the expansion lyre-shaped tube portions formed in dudgeoned tubular bundles between two bottom plates. An expansion lyre comprises at least two sets of tubes of unequal lengths coplanar and symmetrical with respect to the main tube axis, with connecting portions between the tubes forming said sets. The invention applies to apparatus such as heat exchangers, heaters, superheaters or breeders [fr

Steam generator tube failures

International Nuclear Information System (INIS)

MacDonald, P.E.; Shah, V.N.; Ward, L.W.; Ellison, P.G.

1996-04-01

A review and summary of the available information on steam generator tubing failures and the impact of these failures on plant safety is presented. The following topics are covered: pressurized water reactor (PWR), Canadian deuterium uranium (CANDU) reactor, and Russian water moderated, water cooled energy reactor (VVER) steam generator degradation, PWR steam generator tube ruptures, the thermal-hydraulic response of a PWR plant with a faulted steam generator, the risk significance of steam generator tube rupture accidents, tubing inspection requirements and fitness-for-service criteria in various countries, and defect detection reliability and sizing accuracy. A significant number of steam generator tubes are defective and are removed from service or repaired each year. This wide spread damage has been caused by many diverse degradation mechanisms, some of which are difficult to detect and predict. In addition, spontaneous tube ruptures have occurred at the rate of about one every 2 years over the last 20 years, and incipient tube ruptures (tube failures usually identified with leak detection monitors just before rupture) have been occurring at the rate of about one per year. These ruptures have caused complex plant transients which have not always been easy for the reactor operators to control. Our analysis shows that if more than 15 tubes rupture during a main steam line break, the system response could lead to core melting. Although spontaneous and induced steam generator tube ruptures are small contributors to the total core damage frequency calculated in probabilistic risk assessments, they are risk significant because the radionuclides are likely to bypass the reactor containment building. The frequency of steam generator tube ruptures can be significantly reduced through appropriate and timely inspections and repairs or removal from service

Prospects for stronger calandria tubes

International Nuclear Information System (INIS)

Ells, C.E.; Coleman, C.E.; Hosbons, R.R.; Ibrahim, E.F.; Doubt, G.L.

1990-12-01

The CANDU calandria tubes, made of seam welded and annealed Zircaloy-2, have given exemplary service in-reactor. Although not designed as a system pressure containment, calandria tubes may remain intact even in the face of pressure tube rupture. One such incident at Pickering Unit 2 demonstrated the economic advantage of such an outcome, and a case can be made for increasing the probability that other calandria tubes would perform in a similar fashion. Various methods of obtaining stronger calandria tubes are available, and reviewed here. When the tubes are internally pressurized, the weld is the weak section of the tube. Increasing the oxygen concentration in the starting sheet, and thickening the weld, are promising routes to a stronger tube

Fabrication of seamless calandria tubes

International Nuclear Information System (INIS)

Saibaba, N.; Phanibabu, C.; Bhaskara Rao, C.V.; Kalidas, R.; Ganguly, C.

2002-01-01

Full text: Calandria tube is a large diameter, thin walled zircaloy-4 tube and is an important structural component of PHWR type of reactors. These tubes are lifetime components and remain during the full life of the reactor. Calandria tubes are classified as extremely thin walled tubes with a diameter to wall thickness ratio of around 96. Such thin walled tubes are conventionally produced by seam welded route comprising of extrusion of slabs followed by a series of hot and rolling passes, shaping into O-shape and eventual welding. An alternative and superior method of fabricating the calandria tubes, the seamless route, has been developed, which involves hot extrusion of mother blanks followed by three successive cold pilger reductions. Eccentricity correction of the extruded blanks is carried out on a special purpose grinding equipment to bring the wall thickness variation within permissible limits. Predominant wall thickness reductions are given during cold pilgering to ensure high Q-factor values. The texture in the finished tubes could be closely, controlled with an average f r value of 0.65. Pilgering parameters and tube guiding system have been specially designed to facilities rolling of thin walled tubes. Seamless calandria tubes have distinct advantages over welded tubes. In addition to the absence of weld, they are dimensionally more stable, lighter in weight and possess uniform grains with superior grain size. The cycle time from billet to finished product is substantially reduced and the product is amenable to high level of quality assurance. The most significant feature of the seamless route is its material recovery over welded route. Residual stresses measured in the tubes indicate that these are negligible and uniform along the length of the tube. In view of their superior quality, the first charge of seamless calandria tubes will be rolled into the first 500 MWe Pressurised Heavy Water Reactor at Tarapur

Method for shaping polyethylene tubing

Science.gov (United States)

Kramer, R. C.

1981-01-01

Method forms polyethylene plastic tubing into configurations previously only possible with metal tubing. By using polyethylene in place of copper or stain less steel tubing inlow pressure systems, fabrication costs are significantly reduced. Polyethylene tubing can be used whenever low pressure tubing is needed in oil operations, aircraft and space applications, powerplants, and testing laboratories.

Spring/dimple instrument tube restraint

International Nuclear Information System (INIS)

DeMario, E.E.; Lawson, C.N.

1993-01-01

A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs. 7 figures

A new orthopteran-parasitizing horsehair worm, Acutogordius taiwanensis sp. n., with a redescription of Chordodes formosanus and novel host records from Taiwan (Nematomorpha, Gordiida

Directory of Open Access Journals (Sweden)

Ming-Chung Chiu

2017-07-01

Full Text Available A description of a new species of horsehair worm, Acutogordius taiwanensis sp. n., a redescription of Chordodes formosanus, and novel host records for the latter are provided. Acutogordius taiwanensis sp. n. is morphologically similar to A. protectus with moderately flat areoles on its tail tips, but is distinguishable by small mid-body ornamentations. Despite the distinct differences in the post-cloacal crescents between 14 male samples, their conspecific status, along with that of nine female samples, was upheld by a phylogenetic comparison of partial cytochrome oxidase subunit I (COI sequences. Chordodes formosanus is another common horsehair worm species in Taiwan, which was previously believed to specifically parasitize Hierodula mantids. However, in this study, five C. formosanus were observed emerging from an Acromantis mantid, and two long-horned grasshopper hosts (Leptoteratura sp. and Holochlora japonica. These five worms showed high degrees of similarity in COI sequences and morphology, but one of these individuals bore abnormal crowned areoles, which has never been observed in C. formosanus, and may be attributed to the incomplete development of this particular individual.

Intercostal drainage tube or intracardiac drainage tube?

Science.gov (United States)

Anitha, N; Kamath, S Ganesh; Khymdeit, Edison; Prabhu, Manjunath

2016-01-01

Although insertion of chest drain tubes is a common medical practice, there are risks associated with this procedure, especially when inexperienced physicians perform it. Wrong insertion of the tube has been known to cause morbidity and occasional mortality. We report a case where the left ventricle was accidentally punctured leading to near-exsanguination. This report is to highlight the need for experienced physicians to supervise the procedure and train the younger physician in the safe performance of the procedure.

Pneumatic tube-transported blood samples in lithium heparinate gel separator tubes may be more susceptible to haemolysis than blood samples in serum tubes.

Science.gov (United States)

Böckel-Frohnhöfer, Nicole; Hübner, Ulrich; Hummel, Björn; Geisel, Jürgen

2014-10-01

Pneumatic tube systems are widely used in hospitals. Advantages are high speed and rapid availability of the samples. However, the transportation by pneumatic tube promotes haemolysis. Haemolysis interferes with many spectrophotometric assays and is a common problem in clinical laboratories. The haemolysis index (HI) as a semi-quantitative representation of the level of haemolysis was compared in unpaired tube-transported and hand-delivered routine lithium heparinate plasma samples (n = 1368 and n = 837, respectively). Additionally, the HI distribution was measured in lithium heparinate plasma samples with a HI above the threshold value of 20 and in paired serum samples after transportation by pneumatic tube system. HI values above 20 can interfere with the selected assays: Creatine kinase (CK), creatine kinase-MB (CK-MB) and alanine aminotransferase (ALT) activities. These parameters were determined to demonstrate how haemolysis affects the results. 17.5% of the tube-transported plasma samples and 2.6% of the hand-delivered plasma samples had a HI above 20. The median HI in pneumatic tube-transported lithium heparinate plasma was 85 and 33 in the paired serum samples. The median HI difference between paired plasma and serum was 46. Blood samples in lithium heparinate tubes may be substantially more susceptible to haemolysis by pneumatic tube transportation than serum tube samples. Although our results cannot be universally applied to laboratories with different pneumatic tube systems, it is recommended that each laboratory evaluate carefully the degree of haemolysis after the transportation by the own pneumatic tube system and in terms of the sample type.

Microplastic moves pollutants and additives to worms, reducing functions linked to health and biodiversity.

Science.gov (United States)

Browne, Mark Anthony; Niven, Stewart J; Galloway, Tamara S; Rowland, Steve J; Thompson, Richard C

2013-12-02

Inadequate products, waste management, and policy are struggling to prevent plastic waste from infiltrating ecosystems [1, 2]. Disintegration into smaller pieces means that the abundance of micrometer-sized plastic (microplastic) in habitats has increased [3] and outnumbers larger debris [2, 4]. When ingested by animals, plastic provides a feasible pathway to transfer attached pollutants and additive chemicals into their tissues [5-15]. Despite positive correlations between concentrations of ingested plastic and pollutants in tissues of animals, few, if any, controlled experiments have examined whether ingested plastic transfers pollutants and additives to animals. We exposed lugworms (Arenicola marina) to sand with 5% microplastic that was presorbed with pollutants (nonylphenol and phenanthrene) and additive chemicals (Triclosan and PBDE-47). Microplastic transferred pollutants and additive chemicals into gut tissues of lugworms, causing some biological effects, although clean sand transferred larger concentrations of pollutants into their tissues. Uptake of nonylphenol from PVC or sand reduced the ability of coelomocytes to remove pathogenic bacteria by >60%. Uptake of Triclosan from PVC diminished the ability of worms to engineer sediments and caused mortality, each by >55%, while PVC alone made worms >30% more susceptible to oxidative stress. As global microplastic contamination accelerates, our findings indicate that large concentrations of microplastic and additives can harm ecophysiological functions performed by organisms. Copyright © 2013 Elsevier Ltd. All rights reserved.

A comparison of tape-tying versus a tube-holding device for securing endotracheal tubes in adults.

Science.gov (United States)

Murdoch, E; Holdgate, A

2007-10-01

During the transfer of intubated patients, endotracheal tube security is paramount. This study aims to compare two methods of securing an endotracheal tube in adults: tying with a cloth tape versus the Thomas Endotracheal Tube Holder (Laerdal). A manikin-based study was performed using paramedics and critical care doctors (consultants and senior trainees) as participants. Each participant was asked to secure an endotracheal tube that had been placed within the trachea of a manikin a total of six times, the first three times using tied cloth tape and the last three times using a Thomas Endotracheal Tube Holder. Following each 'fixation' and after the participant had left the room, the security of the tube was tested by applying a fixed force laterally and to the right by dropping a 1.25 kg weight a distance of 50 cm. The amount of movement of the tube with respect to the teeth was measured and recorded in millimetres. Two-hundred-and-seventy tube fixations (135 tied vs. 135 tube holder) were performed by 45 participants. The degree of tube movement was significantly higher when the tube was secured with a tie compared with when the tube holder was used (median movement 22 mm vs. 4 mm, P tube holder device minimised tube movement in a manikin model when compared with conventional tape tying. The use of this device when transporting intubated patients may reduce the risk of tube displacement though further clinical studies are warranted.

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... search for current job openings visit HHS USAJobs Home >> NEI YouTube Videos >> NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract ...

Double wall steam generator tubing

International Nuclear Information System (INIS)

Padden, T.R.; Uber, C.F.

1983-01-01

Double-walled steam generator tubing for the steam generators of a liquid metal cooled fast breeder reactor prevents sliding between the surfaces due to a mechanical interlock. Forces resulting from differential thermal expansion between the outer tube and the inner tube are insufficient in magnitude to cause shearing of base metal. The interlock is formed by jointly drawing the tubing, with the inside wall of the outer tube being already formed with grooves. The drawing causes the outer wall of the inner tube to form corrugations locking with the grooves. (author)

Learning from YouTube [Video Book

Science.gov (United States)

Juhasz, Alexandra

2011-01-01

YouTube is a mess. YouTube is for amateurs. YouTube dissolves the real. YouTube is host to inconceivable combos. YouTube is best for corporate-made community. YouTube is badly baked. These are a few of the things Media Studies professor Alexandra Juhasz (and her class) learned about YouTube when she set out to investigate what actually happens…

Recurrent cholangitis in the tropics: Worm or cast?

Directory of Open Access Journals (Sweden)

Jain P

2010-01-01

Full Text Available The development of biliary casts is very rare, especially in non-liver transplant patients. The etiology of these casts is uncertain but several factors have been proposed which lead to bile stasis and/or gallbladder hypo-contractility and promote cast formation. Here, we report a 54-year-old male, with diabetes and ischemic heart disease, who presented with recurrent attacks of cholangitis. Magnetic resonance cholangiopancreatography revealed linear T1 hyperintense and T2 hypointense filling defects in the right and left hepatic ducts extending into the common hepatic duct, and a calculus in the lower common bile duct, raising a suspicion of worm in the biliary tree. In view of failed attempts at extraction on endoscopy, patient underwent surgery. At exploration, biliary casts and stones were extracted from the proximal and the second order bile ducts, with the help of intraoperative choledochoscopy and a bilio-enteric anastomosis was accomplished. Although endoscopic retrieval of the biliary cast can be employed as first-line management, surgery should be considered in case it fails.

Descifrado geométrico de transmisiones de engranaje por tornillo sinfín cilíndrico // Deciphered geometric of worm gears transmissions

Directory of Open Access Journals (Sweden)

G. Rivero Llerena

2000-01-01

Full Text Available Se aborda el tema de la geometría de transmisiones de engranaje por tornillo sinfín cilíndrico como acción preliminar alproceso de reconversión de reductores de velocidad de mismo tipo. Se utilizan los diagramas bicromáticos como unaherramienta para el tratamiento algorítmico de problemas de descifrado geométrico.Palabras claves: Transmisión mecánica, descifrado, grafos bicromáticos, engranaje de tornillo sinfín.____________________________________________________________________AbstractThe worm gear geometry is treated as a way of recovering of speed reducers. Bicromatic diagram is used as tool foralgorithm treatment and analyzing of geometric problems.Key word: Worm gears, deciphered, bicromatic diagrams, mechanical transmissions.

NEI You Tube Videos: Amblyopia

Medline Plus

Full Text Available ... search for current job openings visit HHS USAJobs Home » NEI YouTube Videos » NEI YouTube Videos: Amblyopia Listen NEI YouTube Videos YouTube Videos Home Age-Related Macular Degeneration Amblyopia Animations Blindness Cataract ...

Heat transfer performance during in-tube condensation in horizontal smooth, micro-fin and herringbone tubes

OpenAIRE

2008-01-01

M.Ing. An experimental investigation was conducted into the heat transfer characteristics of horizontal smooth, micro-fin and herringbone tubes during in-tube condensation. The study focused on the heat transfer coefficients of refrigerants R-22, R-134a and R-407C inside the three tubes. The herringbone tube results were compared to the smooth and micro-fin tube results. The average increase in the heat transfer coefficient when compared to the smooth tube was found to be as high as 322% w...

Plugging criteria for steam generator tubes with axial cracks near tube support plates

International Nuclear Information System (INIS)

Mattar Neto, Miguel

2000-01-01

Stress corrosion cracking with intergranular attack occurs on the secondary side of steam generator (SG) tubes where impurities concentrate due to boiling under restricted flow conditions. In the most of cases, it can be called ODSCC (Outer Diameter Stress Corrosion Cracking). The typical locations are areas near support plates, in sludge piles and at top of tubesheet crevices. Though it can also occur on free spans under the relatively thin deposits that build up on the tube surfaces. ODSCC near tube plate supports have been the cause of plugging of many tubes. Thus, studies on SG tubes plugging criteria related to this degradation mechanism are presented in this paper. Th purpose is to avoid unnecessary tube plugging from either safety or reliability standpoint. Based on these studies some conclusions on the plugging criteria and on the difficulties to apply them are addressed. (author)

Histological changes in the testes of gamma irradiated cotton leaf worm Spodoptera Littoralis (Boisd.). Vol. 4

Energy Technology Data Exchange (ETDEWEB)

Sallam, H A; Ibrahim, S M; El-Naggar, S M [Department of biological applications, Nuclear Research Center, Atomic Energy Authority, Cairo (Egypt); Abel--Gawad, A A; Assar, M M [Plant protection Department, Faculty of Africulture Moshtohor, Zagazig University cairo (Egypt)

1996-03-01

Male adults, less than 24 hours, of cotton leaf worm, S. Littoralis (Boisd.) were gamma irradiated with 100, 150 and 200 Gy and mated with normal females. The resulting males of each generation were used for mating normal females throughout three successive generations. Dissection of adult male parents immediately after irradiation showed no histological effects on testes. The volumes of testes of F{sub 1}, F{sub 2} and F{sub 3} generations of cotton leaf worm male moths were significantly affected by the radiation doses applied to parental males. The effects on internal anatomy and histology of the male reproductive system confirm that Gy had minimal effect on the volume and the structure of the testes among the three successive generations. Most of the sperm bundles appeared normal and the individual sperm was fully formed indicating normal metamorphosis. However, a dose of 150 Gy showed morphological abnormalities and retardation in sperm maturation. At 200 Gy the volume and structure of the testes were severely affected. Damage in the testes was highest among F{sub 1}, and was minimized in the other generations. 10 figs., 1 tab.

Intercostal drainage tube or intracardiac drainage tube?

Directory of Open Access Journals (Sweden)

N Anitha

2016-01-01

Full Text Available Although insertion of chest drain tubes is a common medical practice, there are risks associated with this procedure, especially when inexperienced physicians perform it. Wrong insertion of the tube has been known to cause morbidity and occasional mortality. We report a case where the left ventricle was accidentally punctured leading to near-exsanguination. This report is to highlight the need for experienced physicians to supervise the procedure and train the younger physician in the safe performance of the procedure.

Condensate subcooling near tube exit during horizontal in-tube condensation

International Nuclear Information System (INIS)

Hashizume, K.; Abe, N.; Ozeki, T.

1992-01-01

In-tube condensation is encountered in various applications for heat exchangers, such as domestic air-conditioning equipment, industrial air-cooled condensers, and moisture separator reheaters (MSRs) for nuclear power pants. Numerous research work has been conducted to predict the condensation heat transfer coefficient, and we have now enough information for thermal design of heat exchangers with horizontal in-tube condensation. Most of the research is analytical and/or experimental work in the annular or stratified flow regime, or experimental work on bulk condensation, i.e., from saturated vapor to complete condensation. On the other hand, there exist few data about the heat transfer phenomena in the very lower-quality region near the tube exit. The purpose of this paper is to clarify the condensation heat transfer phenomena near the tube exit experimentally and analytically, and to predict the degree of condensate subcooling

Microdischarges in DC accelerator tubes

International Nuclear Information System (INIS)

Eastham, D.A.; Thorn, R.

1978-07-01

Voltage tests on the Daresbury ceramic/titanium accelerator tube have shown that microdischarges play an important role in the conditioning process. It has been found that the voltage onset for microdischarges in a tube is dependent on the surface contamination of the electrodes and the tube geometry (in particular the tube length). This geometrical effect can be related to the trajectories of secondary ions emitted from the electrode surfaces. Sensitive diagnostic techniques have been developed to study the mass and energy distribution of ions emitted along the axis of the tube during these predischarges. The energy distribution of protons (and H - ions) can be related to the origins of the discharges in the tube. Detailed results are presented for a particular tube geometry. (author)

Expander for Thin-Wall Tubing

Science.gov (United States)

Pessin, R.

1983-01-01

Tool locally expands small-diameter tubes. Tube expander locally expands and deforms tube: Compressive lateral stress induced in elastomeric sleeve by squeezing axially between two metal tool parts. Adaptable to situations in which tube must have small bulge for mechanical support or flow control.

Minyoo Matata - The Vicious Worm - A Taenia solium Computer-Based Health-Education Tool - in Swahili

DEFF Research Database (Denmark)

Trevisan, Chiara; Fèvre, Eric M.; Owiny, Maurice

2017-01-01

Lack of knowledge is one of the main risk factors for the spread of the zoonotic parasite Taenia solium. The computer-based health-education tool 'The Vicious Worm' was developed to create awareness and provide evidence-based health education as a specific measure in control strategies. To increase...... the reach of the tool, a new version in Swahili was developed and can now be downloaded for free from http://theviciousworm.sites.ku.dk....

Pito Seamount revisited: the discovery and mapping of new black smoker vents

Science.gov (United States)

Cheadle, M. J.; John, B. E.; German, C. R.; Gee, J. S.; Coogan, L. A.; Gillis, K. M.; Swapp, S.

2017-12-01

In February 2017, the RV Atlantis PMaG (PaleoMagnetism and Gabbro) cruise re-visited a black smoker site originally discovered 24 years ago on Pito Seamount, by the submersible Nautile during the French Pito expedition (1993). Pito Seamount (111.639oW, 23.333oS) marks the northern tip of the propagating East Pacific Rise, bounding the east side of the Easter Microplate. There the seafloor rises to 2250mbsl and has a 900m wide, 50m deep axial valley, which hosts at least two separate fields of active hydrothermal vents. AUV Sentry mapping of the summit of Pito seamount (0.5-1m resolution) highlights over 50 active and inactive chimneys amid recent basaltic sheet flows, pillow mounds and ponded lava. The vents occur in two fields/sub-fields; the first covers an area of 800 x 200m, and lies parallel to the ridge axis, along incipient faults forming on the northeastern flank of the axial valley. The second field occurs in a 250m diameter area in the centre of the axial valley. Jason II dive 961 visited, sampled, measured vent orifice temperatures, and acquired 4k video of the chimneys, and re-discovered the active (Magnificent Village) vent first found by Nautile, in the now named Nautile vent field, together with five additional active hydrothermal vents (Jason, Medea, Sentry, Abe and Scotty's Castle). The Magnificent Village, the largest active vent, is 25m tall and has multiple active spires in three main groups surrounding a hollow amphitheater. Measured vent orifice temperatures ranged from 338oC (Magnificent Village) to 370oC (Jason). The vents host a fauna of alvinellid worms, bythograidid crabs, alvincardid shrimps, phymorhynchus gastropods, Corallimorphid anenomes and bathymodiolid mussels, but no vestimentiferan worms. Brisingid brittle stars colonize inactive chimneys.

Categorising YouTube

Directory of Open Access Journals (Sweden)

Thomas Mosebo Simonsen

2011-09-01

Full Text Available This article provides a genre analytical approach to creating a typology of the User Generated Content (UGC of YouTube. The article investigates the construction of navigationprocesses on the YouTube website. It suggests a pragmatic genre approach that is expanded through a focus on YouTube’s technological affordances. Through an analysis of the different pragmatic contexts of YouTube, it is argued that a taxonomic understanding of YouTube must be analysed in regards to the vacillation of a user-driven bottom-up folksonomy and a hierarchical browsing system that emphasises a culture of competition and which favours the already popular content of YouTube. With this taxonomic approach, the UGC videos are registered and analysed in terms of empirically based observations. The article identifies various UGC categories and their principal characteristics. Furthermore, general tendencies of the UGC within the interacting relationship of new and old genres are discussed. It is argued that the utility of a conventional categorical system is primarily of analytical and theoretical interest rather than as a practical instrument.

Lunar Lava Tube Sensing

Science.gov (United States)

York, Cheryl Lynn; Walden, Bryce; Billings, Thomas L.; Reeder, P. Douglas

1992-01-01

Large (greater than 300 m diameter) lava tube caverns appear to exist on the Moon and could provide substantial safety and cost benefits for lunar bases. Over 40 m of basalt and regolith constitute the lava tube roof and would protect both construction and operations. Constant temperatures of -20 C reduce thermal stress on structures and machines. Base designs need not incorporate heavy shielding, so lightweight materials can be used and construction can be expedited. Identification and characterization of lava tube caverns can be incorporated into current precursor lunar mission plans. Some searches can even be done from Earth. Specific recommendations for lunar lava tube search and exploration are (1) an Earth-based radar interferometer, (2) an Earth-penetrating radar (EPR) orbiter, (3) kinetic penetrators for lunar lava tube confirmation, (4) a 'Moon Bat' hovering rocket vehicle, and (5) the use of other proposed landers and orbiters to help find lunar lava tubes.

X-ray tube current control

International Nuclear Information System (INIS)

Dupuis, W.A.; Resnick, T.A.

1982-01-01

A closed loop feedback system for controlling the current output of an x-ray tube. The system has circuitry for improving the transient response and stability of the x-ray tube current over a substantial nonlinear portion of the tube current production characteristic. The system includes a reference generator for applying adjustable step function reference signals representing desired tube currents. The system also includes means for instantaneous sensing of actual tube current. An error detector compares the value of actual and reference tube current and produces an error signal as a function of their difference. The system feedback loop includes amplification circuitry for controlling x-ray tube filament dc voltage to regulate tube current as a function of the error signal value. The system also includes compensation circuitry, between the reference generator and the amplification circuitry, to vary the loop gain of the feedback control system as a function of the reference magnitude

Manipulation and functionalization of nano-tubes: application to boron nitride nano-tubes

International Nuclear Information System (INIS)

Maguer, A.

2007-01-01

This PhD work is divided into two parts dealing with boron nitride (BNNT) and carbon nano-tubes. The first part is about synthesis, purification and chemical functionalization of BNNT. Single-walled BNNT are synthesized by LASER ablation of a hBN target. Improving the synthesis parameters first allowed us to limit the byproducts (hBN, boric acid). A specific purification process was then developed in order to enrich the samples in nano-tubes. Purified samples were then used to develop two new chemical functionalization methods. They both involve chemical molecules that present a high affinity towards the BN network. The use of long chain-substituted quinuclidines and borazines actually allowed the solubilization of BNNT in organic media. Purification and functionalization were developed for single-walled BNNT and were successfully applied to multi-walled BNNT. Sensibility of boron to thermic neutrons finally gave birth to a study about covalent functionalization possibilities of the network. The second part of the PhD work deals with separation of carbon nano-tubes depending on their properties. Microwave irradiation of carbon nano-tubes first allowed the enrichment of initially polydisperse samples in large diameter nano-tubes. A second strategy involving selective interaction between one type of tubes and fullerene micelles was finally envisaged to selectively solubilize carbon nano-tubes with specific electronic properties. (author) [fr

[Prehospital airway management of laryngeal tubes. Should the laryngeal tube S with gastric drain tube be preferred in emergency medicine?].

Science.gov (United States)

Dengler, V; Wilde, P; Byhahn, C; Mack, M G; Schalk, R

2011-02-01

Laryngeal tubes (LT) are increasingly being used for emergency airway management. This article reports on two patients in whom out-of-hospital intubation with a single-lumen LT was associated with massive pulmonary aspiration in one patient and gastric overinflation in the other. In both cases peak inspiratory pressures exceeded the LT leak pressure of approximately 35 mbar. This resulted in gastric inflation and decreased pulmonary compliance and increased inspiratory pressure further, thereby creating a vicious circle. It is therefore recommended that laryngeal tube suction (LTS) should be used in all cases of emergency airway management and a gastric drain tube be inserted through the dedicated second lumen. Apart from gastric overinflation, incorrect LT/LTS placement must be detected and immediately corrected, e.g. in cases of difficult or impossible gastric tube placement, permanent drainage of air from the gastric tube, decreasing minute ventilation or an ascending capnography curve.

Hybrid Epidemics—A Case Study on Computer Worm Conficker

Science.gov (United States)

Zhang, Changwang; Zhou, Shi; Chain, Benjamin M.

2015-01-01

Conficker is a computer worm that erupted on the Internet in 2008. It is unique in combining three different spreading strategies: local probing, neighbourhood probing, and global probing. We propose a mathematical model that combines three modes of spreading: local, neighbourhood, and global, to capture the worm’s spreading behaviour. The parameters of the model are inferred directly from network data obtained during the first day of the Conficker epidemic. The model is then used to explore the tradeoff between spreading modes in determining the worm’s effectiveness. Our results show that the Conficker epidemic is an example of a critically hybrid epidemic, in which the different modes of spreading in isolation do not lead to successful epidemics. Such hybrid spreading strategies may be used beneficially to provide the most effective strategies for promulgating information across a large population. When used maliciously, however, they can present a dangerous challenge to current internet security protocols. PMID:25978309

Molybdenum Tube Characterization report

Energy Technology Data Exchange (ETDEWEB)

Beaux II, Miles Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Usov, Igor Olegovich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-02-07

Chemical vapor deposition (CVD) techniques have been utilized to produce free-standing molybdenum tubes with the end goal of nuclear fuel clad applications. In order to produce tubes with properties desirable for this application, deposition rates were lowered requiring long deposition durations on the order of 50 hours. Standard CVD methods as well as fluidized-bed CVD (FBCVD) methods were applied towards these objectives. Characterization of the tubes produced in this manner revealed material suitable for fuel clad applications, but lacking necessary uniformity across the length of the tubes. The production of freestanding Mo tubes that possess the desired properties across their entire length represents an engineering challenge that can be overcome in a next iteration of the deposition system.

Apparatus for forming an explosively expanded tube-tube sheet joint

International Nuclear Information System (INIS)

Schroeder, J.W.

1984-01-01

The invention relates to apparatus for expanding a tube into a bore formed in a tube sheet. According to the invention, a primary explosive containing a relatively high number of grains of explosive per unit length extends within the tube coextensive with that portion of the tube to be expanded. An energy transfer cord extends between a detonator and the primary explosive and includes a relatively low number of grains of explosive per unit length which are insufficient to detonate the primary explosive. The transfer cord is covered by a sheath to contain the debris and gases associated with the explosion of the explosive therein. A booster extends between the energy transfer cord and the primary explosive and contains an explosive which can be detonated by the explosive in the energy transfer cord and can, upon exploding, in turn detonate the primary explosive. (author)

Failure analysis of boiler tube

International Nuclear Information System (INIS)

Mehmood, K.; Siddiqui, A.R.

2007-01-01

Boiler tubes are energy conversion components where heat energy is used to convert water into high pressure superheated steam, which is then delivered to a turbine for electric power generation in thermal power plants or to run plant and machineries in a process or manufacturing industry. It was reported that one of the tubes of a fire-tube boiler used in a local industry had leakage after the formation of pits at the external surface of the tube. The inner side of the fire tube was working with hot flue gasses with a pressure of 10 Kg/cm/sup 2/ and temperature 225 degree C. The outside of the tube was surrounded by feed water. The purpose of this study was to determine the cause of pits developed at the external surface of the failed boiler tube sample. In the present work boiler tube samples of steel grade ASTM AI61/ASTM A192 were analyzed using metallographic analysis, chemical analysis, and mechanical testing. It was concluded that the appearance of defects on the boiler tube sample indicates cavitation type corrosion failure. Cavitation damage superficially resembled pitting, but surface appeared considerably rougher and had many closely spaced pits. (author)

Neural Tube Defects

Science.gov (United States)

Neural tube defects are birth defects of the brain, spine, or spinal cord. They happen in the ... that she is pregnant. The two most common neural tube defects are spina bifida and anencephaly. In ...

Importance of crevices formed between tubes and tube plate for the operational behaviour of heat exchangers

International Nuclear Information System (INIS)

Achten, N.; Herbsleb, G.; Wieling, N.

1986-01-01

It must be guaranteed by construction and manufacture of heat exchangers that primary and secondary medium are completely separated from each other. When this requirement is fullfilled, the operational use of heat exchangers can be impaired by corrosion reactions within the crevice formed between tube and tube plate which may result in corrosion damage. The various techniques which are in use to connect tubes and tube plate and which are described in the present report, must be valued with respect to the tightness of the connection as well as to the formation of crevices between tubes and tube plate. Corrosion resistant copperbase alloys and stainless steels are the most important materials which are in use for the construction of heat exchangers. The mechanisms of crevice corrosion with unalloyed and low alloy carbon steels, stainless steels, and mixed connections between tube and tube plate with these materials are described in detail. Crevice corrosion may be caused also by the formation of galvanic cells between materials of differing electrochemical response. Furthermore, the concentration of aggressive media in crevices between tubes and tube plate can lead to corrosion damage of heat exchanger tubes. For the service operation of heat exchangers without any hazard of corrosion damage in crevices between tubes and tube plate, such crevices must be avoided by proper construction and manufacture. As a model for suitable measures to avoid crevices, the manufacture of steam generators for PWR's is described. (orig.) [de

A Study on the Profile Change Measurement of Steam Generator Tubes with Tube Expansion Methods

International Nuclear Information System (INIS)

Kim, Young Kyu; Song Myung Ho; Choi, Myung Sik

2011-01-01

Steam generator tubes for nuclear power plants contain the local shape transitions on their inner or outer surface such as dent, bulge, over-expansion, eccentricity, deflection, and so on by the application of physical force during the tube manufacturing and steam generator assembling and by the sludge (that is, corrosion products) produced during the plant operation. The structural integrity of tubes will be degraded by generating the corrosive crack at that location. The profilometry using the traditional bobbin probes which are currently applied for measuring the profile change of tubes gives us basic information such as axial locations and average magnitudes of deformations. However, the three-dimensional quantitative evaluation on circumferential locations, distributional angle, and size of deformations will have to be conducted to understand the effects of residual stresses increased by local deformations on corrosive cracking of tubes. Steam generator tubes of Korean standard nuclear power plants expanded within their tube-sheets by the explosive expansion method and suffered from corrosive cracks in the early stage of power operation. Thus, local deformations of steam generator tubes at the top of tube-sheet were measured with an advanced rotating probe and a laser profiling system for the two cases where the tubes expanded by the explosive expansion method and hydraulic expansion. Also, the trends of eccentricity, deflection, and over-expansion of tubes were evaluated. The advanced eddy current profilometry was confirmed to provide accurate information of local deformations compared with laser profilometry

Incidence of Old World screw-worm fly, Chrysomya bezziana in Iraq

International Nuclear Information System (INIS)

Al-Taweel, Ayad A.; Al-Izzi, Mohammed A.J.; Jassim, Fadhil A.

2000-01-01

The Old World screw-worm fly (OWSWF), Chrysomya bezziana Villenuve, is a member of the insect family Calliphoridae and is an obligate parasite of warm-blooded animals in the tropics and sub-tropics (Norris and Murray 1964). Flies lay their eggs on the edge of wounds or body orifices; the resulting larvae invade the host tissues and produce lesions and infertility if the genitals become infested (Humphrey et al. 1980). Recorded hosts include cattle (Bos indicus), sheep (Ovis aries), goats (Caprus hircus), dogs (Canis familiaris), cats (Felis domesticus) and man (Homo sapiens) (Patton 1920, 1922, Stoddar and Peck 1962, Norris and Murray 1964). This investigation describes the incidence of myiasis caused by C. bezziana in Iraq from September 1996 to March 1998

Procedure and device for extracting the end of a tube inserted into a hole in a tube plate

International Nuclear Information System (INIS)

1980-01-01

When constructing heat exchangers and steam generators, particularly in the construction of steam generators for nuclear power stations, many small diameter tubes have to be secured into a very thick tube plate for instance 600 mm thick. This crimping or expanding of the tube is generally performed by rolling the internal surface of the tube inside a hole drilled right through the tube plate and slightly greater in diameter than the external diameter of the tube before the tube is rolled. To check the tubes for defects, it is necessary to extract certain tubes from the tube plate in order to move the tube to a testing and inspection point and examine the part of it that was secured in the plate hole. The invention concerns the uncrimping of these tubes [fr

Radiation-resistant camera tube

International Nuclear Information System (INIS)

Kuwahata, Takao; Manabe, Sohei; Makishima, Yasuhiro

1982-01-01

It was a long time ago that Toshiba launched on manufacturing black-and-white radiation-resistant camera tubes employing nonbrowning face-plate glass for ITV cameras used in nuclear power plants. Now in compliance with the increasing demand in nuclear power field, the Company is at grips with the development of radiation-resistant single color-camera tubes incorporating a color-stripe filter for color ITV cameras used under radiation environment. Herein represented are the results of experiments on characteristics of materials for single color-camera tubes and prospects for commercialization of the tubes. (author)

Jose Cabrera (Zorita) tube examination

International Nuclear Information System (INIS)

Kuchirka, P.J.

1986-01-01

Jose Cabrera (Zorita) tube examination procedures are discussed. This plant continues to use phosphate water chemistry (sodium/phosphate ratio = 2.1). Three hot leg tube segments were pulled from the Jose Cabera (Zorita) plant in 1985. One tube had a field EC indication on the OD at the first tube support plate and the other two had field EC indications on their ID about 3 inches above the bottom of the tube sheet. All three tubes were initially sent to Battelle for preliminary NDE and decontamination. Segments of two tubes were sent to Westinghouse for destructive examination. The results of the laboratory eddy current and radiographic examinations are given. The results of the visual examinations are also given. The tube with OD indications was destructively examined and shallow intergranular pitting and intergranular attack, up to 2 mils deep, were found on the OD in the tube sheet region. Local areas of IGA, up to 5 mils deep, were found on the OD within the tube support plate region. A summary of this information together with supporting micrographs is given. It was hypothesized that a caustic crevice environment was the cause of this mild degradation. Shallow areas of thinning or wastage, up to 3 mils, were found just above the top of the tube sheet in the sludge pile region. Even more shallow wastage was found at the edges of support plate locations. This wastage is believed to be the remnant of early plant chemistry when a higher sodium/phosphate ratio and higher phosphate concentration were allowed

The effect of tube-support interaction on the dynamic response of heat exchanger tubes

International Nuclear Information System (INIS)

Shin, Y.S.; Jendrzejczyk, J.A.; Wambsganss, M.W.

1977-01-01

To avoid detrimental tube vibration in heat exchangers, resonant conditions and instabilitites must be avoided, and/or peak dynamic amplitudes must not exceed allowable limits. In attempting a theoretical analysis, questions arise as to the effects of tube/support interaction on tube vibrational characteristics (i.e. resonant frequencies, modes, damping) and response amplitude. As a part of ANL's Flow-Induced Vibration Program in support of the Clinch River Breeder Reactor Plant (CRBRP) steam generator design activity, tube/support interaction experiments are being performed not only to gain the insight into the dynamic behavior of CRBRP steam generator tubes, but also to provide the basis for developing design guidance. Test results were compared with anaytical results based on multispan tube with 'knife-edge' supports at the support locations. (Auth.)

Twin-tubes: 3D tracking based on the ATLAS muon drift tubes

International Nuclear Information System (INIS)

Woudstra, M.; Bobbink, G.J.; Eldik, N. van; Graaf, H. van der; Kluit, P.; Koutsman, A.; Limper, M.; Linde, F.; Massaro, G.; Snuverink, J.; Vreeswijk, M.; Groenstege, H.; Koopstra, J.; Mos, S.; Rewiersma, P.; Timmermans, C.; Dijkema, J.

2006-01-01

The Monitored Drift Tubes (MDTs) of the ATLAS Muon Spectrometer have been paired to form so-called twin-tubes to measure the coordinate which runs along the wire direction. This modification endows the MDTs with full 3D track reconstruction using specially designed electronic boards. The performance of the twin-tubes has been measured for an equipped MDT chamber at the ATLAS Muon Cosmic Ray Test Stand at NIKHEF. The efficiency of a twin-tube has been determined to be 99.8%, and the measured resolution 17 cm per hit. By equipping one multilayer consisting of three layers and combining the measurements a resolution of 10 cm has been obtained

Free Piston Double Diaphragm Shock Tube

OpenAIRE

OGURA, Eiji; FUNABIKI, Katsushi; SATO, Shunichi; ABE, Takashi; 小倉, 栄二; 船曳, 勝之; 佐藤, 俊逸; 安部, 隆士

1997-01-01

A free piston double diaphragm shock tube was newly developed for generation of high Mach number shock wave. Its characteristics was investigated for various operation parameters; such as a strength of the diaphragm at the end of the comparession tube, an initial pressure of low pressure tube, an initial pressure of medium pressure tube and the volume of compression tube. Under the restriction of fixed pressures for the driver high pressure tube (32×10^5Pa) and the low pressure tube (40Pa) in...

Liquid-Nitrogen Test for Blocked Tubes

Science.gov (United States)

Wagner, W. R.

1984-01-01

Nondestructive test identifies obstructed tube in array of parallel tubes. Trickle of liquid nitrogen allowed to flow through tube array until array accumulates substantial formation of frost from moisture in air. Flow stopped and warm air introduced into inlet manifold to heat tubes in array. Tubes still frosted after others defrosted identified as obstructed tubes. Applications include inspection of flow systems having parallel legs.

Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube

Science.gov (United States)

2017-06-01

suggestions for reducing this burden to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188...the tube to the 110 cm mark. At the 110 cm mark, secure the tube with medical tape and remove the stylet completely allowing enough tube slack ...and it provides slack that allows tube to advance distally by the effect of natural peristalsis on the bolus-sized balloon. Results: Most feeding

Deep Sequencing of Myxilla (Ectyomyxilla) methanophila, an Epibiotic Sponge on Cold-Seep Tubeworms, Reveals Methylotrophic, Thiotrophic, and Putative Hydrocarbon-Degrading Microbial Associations

KAUST Repository

Arellano, Shawn M.; Lee, Onon; Lafi, Feras Fawzi; Yang, Jiangke; Wang, Yong; Young, Craig; Qian, Peiyuan

2012-01-01

The encrusting sponge Myxilla (Ectyomyxilla) methanophila (Poecilosclerida: Myxillidae) is an epibiont on vestimentiferan tubeworms at hydrocarbon seeps on the upper Louisiana slope of the Gulf of Mexico. It has long been suggested that this sponge

X-ray tubes

International Nuclear Information System (INIS)

Young, R.W.

1979-01-01

A form of x-ray tube is described which provides satisfactory focussing of the electron beam when the beam extends for several feet from gun to target. Such a tube can be used for computerised tomographic scanning. (UK)

Viability of microcomputed tomography to study tropical marine worm galleries in humid muddy sediments

Energy Technology Data Exchange (ETDEWEB)

Pennafirme, Simone F., E-mail: sipennafirme@gmail.com [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Biologia. Dept. de Biologia Marinha; Machado, Alessandra S.; Lima, Inaya; Suzuki, Katia N.; Lopes, Ricardo T., E-mail: machado@lin.ufrj.br, E-mail: inaya@lin.ufrj.br, E-mail: norisuzuki6@yahoo.com.br, E-mail: ricardo@lin.ufj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), RJ (Brazil). Lab. de Instrumentacao Nuclear

2013-07-01

Bioturbation is an ecological process driven by organisms, which transports nutrients and gases from air/water to sediment through their galleries, by the time they feed, burrow and/or construct galleries. This exchange is vital to the maintenance of micro and macrobenthic organisms, mainly in muddy flat environments. Species with distinct galleries could create levels of bioturbation, affecting the benthic interactions. In this sense, it is fundamental developing a non-destructive method that permits identifying/quantifying the properties of these galleries. The recent advances in micro-computed tomography are allowing the high resolution 3D images generation. However, once muddy sediments are rich in organic matter and interstitial water, these would lead to motion artifacts which could, in turn, decrease the accuracy of galleries identification/quantification. In this context, the aim of this study was to develop a protocol which combines laboratory experiments and microtomography analysis in order to generate accurate 3D images of the small marine worm's galleries within humid muddy sediments. The sediment was collected at both muddy flats of Surui's and Itaipu lagoon's mangroves (RJ-Brazil), sieved (0.5mm mesh) and introduced with one individual of the marine worm Laeonereis acuta (Nereididae, Polychaeta) in each acrylic corer holders (4.4cm of internal diameter). High energy microtomography scanner was used to obtain 3D images and the setup calibration was 130 kV and 61 mA. Each acquisition image time was among 4h and 6h. Several procedures of drying remained water inside the cores were performed aiming obtaining images without movement artifacts due to circulating water, and this issue was one of the main studied parameter. In order to investigate possible chemical effects, 2ml of formalin (35%) with menthol were added to the surface of the cores. The results show that although the drying time was appropriated, the chemicals created bubbles

Viability of microcomputed tomography to study tropical marine worm galleries in humid muddy sediments

International Nuclear Information System (INIS)

Pennafirme, Simone F.; Machado, Alessandra S.; Lima, Inaya; Suzuki, Katia N.; Lopes, Ricardo T.

2013-01-01

Bioturbation is an ecological process driven by organisms, which transports nutrients and gases from air/water to sediment through their galleries, by the time they feed, burrow and/or construct galleries. This exchange is vital to the maintenance of micro and macrobenthic organisms, mainly in muddy flat environments. Species with distinct galleries could create levels of bioturbation, affecting the benthic interactions. In this sense, it is fundamental developing a non-destructive method that permits identifying/quantifying the properties of these galleries. The recent advances in micro-computed tomography are allowing the high resolution 3D images generation. However, once muddy sediments are rich in organic matter and interstitial water, these would lead to motion artifacts which could, in turn, decrease the accuracy of galleries identification/quantification. In this context, the aim of this study was to develop a protocol which combines laboratory experiments and microtomography analysis in order to generate accurate 3D images of the small marine worm's galleries within humid muddy sediments. The sediment was collected at both muddy flats of Surui's and Itaipu lagoon's mangroves (RJ-Brazil), sieved (0.5mm mesh) and introduced with one individual of the marine worm Laeonereis acuta (Nereididae, Polychaeta) in each acrylic corer holders (4.4cm of internal diameter). High energy microtomography scanner was used to obtain 3D images and the setup calibration was 130 kV and 61 mA. Each acquisition image time was among 4h and 6h. Several procedures of drying remained water inside the cores were performed aiming obtaining images without movement artifacts due to circulating water, and this issue was one of the main studied parameter. In order to investigate possible chemical effects, 2ml of formalin (35%) with menthol were added to the surface of the cores. The results show that although the drying time was appropriated, the chemicals created bubbles within the

X-ray tube

International Nuclear Information System (INIS)

Webley, R.S.

1975-01-01

The object of the invention described is to provide an X-ray tube providing a scanned X-ray output which does not require a scanned electron beam. This is obtained by an X-ray tube including an anode which is rotatable about an axis, and a source of a beam of energy, for example an electron beam, arranged to impinge on a surface of the anode to generate X-radiation substantially at the region of incidence on the anode surface. The anode is rotatable about the axis to move the region of incidence over the surface. The anode is so shaped that the rotation causes the region of incidence to move in a predetermined manner relative to fixed parts of the tube so that the generated X-radiation is scanned in a predetermined manner relative to the tube. (UK)

Pump element for a tube pump

DEFF Research Database (Denmark)

2011-01-01

The invention relates to a tube pump comprising a tube and a pump element inserted in the tube, where the pump element comprises a rod element and a first and a second non-return valve member positioned a distance apart on the rod element. The valve members are oriented in the same direction...... relative to the rod element so as to allow for a fluid flow in the tube through the first valve member, along the rod element, and through the second valve member. The tube comprises an at least partly flexible tube portion between the valve members such that a repeated deformation of the flexible tube...... portion acts to alternately close and open the valve members thereby generating a fluid flow through the tube. The invention further relates to a pump element comprising at least two non-return valve members connected by a rod element, and for insertion in an at least partly flexible tube in such tube...

Short Communication: A Simple Method for Performing Worm-Egg Counts on Sodium Acetate Formaldehyde-Preserved Samples

Directory of Open Access Journals (Sweden)

Wayne Melrose

2012-01-01

Full Text Available The Kato Katz method is the most common way of performing worm-egg counts on human faecal samples, but it must be done in the field using freshly collected samples. This makes it difficult to use in remote, poorly accessible situations. This paper describes a simple method for egg counts on preserved samples collected in the field and sent to a central location for further processing.

Ultrasonic measurement of gap between calandria tube and liquid injection shutdown system tube in PHWR

International Nuclear Information System (INIS)

Kim, Tae Ryong; Sohn, Seok Man; Lee, Jun Shin; Lee, Sun Ki; Lee, Jong Po

2001-01-01

Sag of CT or liquid injection shutdown system tubes in pressurized heavy water reactor is known to occur due to irradiation creep and growth during plant operation. When the sag of CT is big enough, the CT tube possibly comes in contact with liquid injection shutdown system tube (LIN) crossing beneath the CT, which subsequently may prevent the safe operation. It is therefore necessary to check the gap between the two tubes in order to confirm no contacts when using a proper measure periodically during the plant life. An ultrasonic gap measuring probe assembly which can be fed through viewing port installed on the calandria was developed and utilized to measure the sags of both tubes in a pressurized heavy water reactor in Korea. It was found that the centerlines of CT and LIN can be precisely detected by ultrasonic wave. The gaps between two tubes were easily obtained from the relative distance of the measured centerline elevations of the tubes. But the measured gap data observed at the viewing port were actually not the data at the crossing point of CT and LIN. To get the actual gap between two tubes, mathematical modeling for the deflection curves of two tubes was used. The sags of CT and LIN tubes were also obtained by comparison of the present centerlines with the initial elevations at the beginning of plant operation. The gaps between two tubes in the unmeasurable regions were calculated based on the measurement data and the channel power distribution

Tubing misconnections: normalization of deviance.

Science.gov (United States)

Simmons, Debora; Symes, Lene; Guenter, Peggi; Graves, Krisanne

2011-06-01

Accidental connection of an enteral system to an intravenous (IV) system frequently results in the death of the patient. Misconnections are commonly attributed to the presence of universal connectors found in the majority of patient care tubing systems. Universal connectors allow for tubing misconnections between physiologically incompatible systems. The purpose of this review of case studies of tubing misconnections and of current expert recommendations for safe tubing connections was to answer the following questions: In tubing connections that have the potential for misconnections between enteral and IV tubing, what are the threats to safety? What are patient outcomes following misconnections between enteral and IV tubing? What are the current recommendations for preventing misconnections between enteral and IV tubing? Following an extensive literature search and guided by 2 models of threats and errors, the authors analyzed case studies and expert opinions to identify technical, organizational, and human errors; patient-related threats; patient outcomes; and recommendations. A total of 116 case studies were found in 34 publications. Each involved misconnections of tubes carrying feedings, intended for enteral routes, to IV lines. Overwhelmingly, the recommendations were for redesign to eliminate universal connectors and prevent misconnections. Other recommendations were made, but the analysis indicates they would not prevent all misconnections. This review of the published case studies and current expert recommendations supports a redesign of connectors to ensure incompatibility between enteral and IV systems. Despite the cumulative evidence, little progress has been made to safeguard patients from tubing misconnections.

Resolution of lava tubes with ground penetrating radar: preliminary results from the TubeX project

Science.gov (United States)

Esmaeili, S.; Kruse, S.; Garry, W. B.; Whelley, P.; Young, K.; Jazayeri, S.; Bell, E.; Paylor, R.

2017-12-01

As early as the mid 1970's it was postulated that planetary tubes or caves on other planetary bodies (i.e., the Moon or Mars) could provide safe havens for human crews, protect life and shield equipment from harmful radiation, rapidly fluctuating surface temperatures, and even meteorite impacts. What is not clear, however, are the exploration methods necessary to evaluate a potential tube-rich environment to locate suitable tubes suitable for human habitation. We seek to address this knowledge gap using a suite of instruments to detect and document tubes in a terrestrial analog study at Lava Beds National Monument, California, USA. Here we describe the results of ground penetrating radar (GPR) profiles and light detection and ranging (LiDAR) scans. Surveys were conducted from the surface and within four lava tubes (Hercules Leg, Skull, Valentine and, Indian Well Caves) with varying flow composition, shape, and complexity. Results are shown across segments of these tubes where the tubes are 10 m in height and the ceilings are 1 - 10 m below the surface. The GPR profiles over the tubes are, as expected, complex, due to scattering from fractures in roof material and three-dimensional heterogeneities. Point clouds derived from the LiDAR scans of both the interior and exterior of the lava tubes provide precise positioning of the tube geometry and depth of the ceiling and floor with respect to the surface topography. GPR profiles over LiDAR-mapped tube cross-sections are presented and compared against synthetic models of radar response to the measured geometry. This comparison will help to better understand the origins of characteristic features in the radar profiles. We seek to identify the optimal data processing and migration approaches to aid lava tube exploration of planetary surfaces.

The effect of tube rupture location on the consequences of multiple steam generator tube rupture event

International Nuclear Information System (INIS)

Jeong, Ji Hwan; Kweon, Young Chul

2002-01-01

A multiple steam generator tube rupture (MSGTR) event has never occurred in the commercial operation of nuclear reactors while single steam generator tube rupture (SGTR) events are reported to occur every 2 years. As there has been no occurrence of a MSGTR event, the understanding of transients and consequences of this event is very limited. In this study, a postulated MSGTR event in an advanced power reactor 1400 (APR 1400) is analyzed using the thermal-hydraulic system code, MARS1.4. The APR 1400 is a two-loop, 3893 MWt, PWR proposed to be built in 2010. The present study aims to understand the effects of rupture location in heat transfer tubes following a MSGTR event. The effects of five tube rupture locations are compared with each other. The comparison shows that the response of APR1400 allows the shortest time for operator action following a tube rupture in the vicinity of the hot-leg side tube sheet and allows the longest time following a tube rupture at the tube top. The MSSV lift time for rupture at the tube-top is evaluated as 24.5% larger than that for rupture at the hot-leg side tube sheet

Experimental study of tube/support impact forces in multi-span PWR steam generator tubes

International Nuclear Information System (INIS)

Axisa, F.; Desseaux, A.; Gibert, R.J.

1984-12-01

The vibro-impact response of a straight part of a steam generator tube is investigated experimentally and using numerical simulation with the aim to relate tube overall dynamics with excitation and tube-support clearance. Configuration studied here corresponds to the tube being excited in only one direction at its first resonance presenting an antinode of vibration at the impacted support. Tests show namely that midspan displacement of tube is almost proportional to excitation level and clearance. Impact forces averaged over a cycle of vibration are almost proportional to excitation and poorly dependent on clearance. Results of numerical simulation are in fairly good agreement with test results

YouTube and 'psychiatry'.

Science.gov (United States)

Gordon, Robert; Miller, John; Collins, Noel

2015-12-01

YouTube is a video-sharing website that is increasingly used to share and disseminate health-related information, particularly among younger people. There are reports that social media sites, such as YouTube, are being used to communicate an anti-psychiatry message but this has never been confirmed in any published analysis of YouTube clip content. This descriptive study revealed that the representation of 'psychiatry' during summer 2012 was predominantly negative. A subsequent smaller re-analysis suggests that the negative portrayal of 'psychiatry' on YouTube is a stable phenomenon. The significance of this and how it could be addressed are discussed.

YouTube as an information source for pediatric adenotonsillectomy and ear tube surgery.

Science.gov (United States)

Sorensen, Jeffrey A; Pusz, Max D; Brietzke, Scott E

2014-01-01

Assess the overall quality of information on adenotonsillectomy and ear tube surgery presented on YouTube (www.youtube.com) from the perspective of a parent or patient searching for information on surgery. The YouTube website was systematically searched on select dates with a formal search strategy to identify videos pertaining to pediatric adenotonsillectomy and ear tube surgery. Only videos with at least 5 (ear tube surgery) or 10 (adenotonsillectomy) views per day were included. Each video was viewed and scored by two independent scorers. Videos were categorized by goal and scored for video/audio quality, accuracy, comprehensiveness, and procedure-specific content. Cross-sectional study. Public domain website. Fifty-five videos were scored for adenotonsillectomy and forty-seven for ear tube surgery. The most common category was educational (65.3%) followed by testimonial (28.4%), and news program (9.8%). Testimonials were more common for adenotonsillectomy than ear tube surgery (41.8% vs. 12.8%, p=0.001). Testimonials had a significantly lower mean accuracy (2.23 vs. 2.62, p=0.02), comprehensiveness (1.71 vs. 2.22, p=0.007), and TA specific content (0.64 vs. 1.69, p=0.001) score than educational type videos. Only six videos (5.9%) received high scores in both video/audio quality and accuracy/comprehensiveness of content. There was no significant association between the accuracy and comprehensive score and views, posted "likes", posted "dislikes", and likes/dislikes ratio. There was an association between "likes" and mean video quality (Spearman's rho=0.262, p=0.008). Parents/patients searching YouTube for information on pediatric adenotonsillectomy and ear tube surgery will generally encounter low quality information with testimonials being common but of significantly lower quality. Viewer perceived quality ("likes") did not correlate to formally scored content quality. Published by Elsevier Ireland Ltd.

Proteomic analysis of the excretory/secretory products and antigenic proteins of Echinococcus granulosus adult worms from infected dogs.

Science.gov (United States)

Wang, Ying; Xiao, Di; Shen, Yujuan; Han, Xiuming; Zhao, Fei; Li, Xiaohong; Wu, Weiping; Zhou, Hejun; Zhang, Jianzhong; Cao, Jianping

2015-05-21

Cystic echinococcosis, which is caused by Echinococcus granulosus, is one of the most widespread zoonotic helminth diseases that affects humans and livestock. Dogs, which harbor adult worms in their small intestines, are a pivotal source of E. granulosus infection in humans and domestic animals. Therefore, novel molecular approaches for the prevention and diagnosis of this parasite infection in dogs need to be developed. In this study, we performed proteomic analysis to identify excretory/secretory products (ES) and antigenic proteins of E. granulosus adult worms using two-dimensional electrophoresis, tandem matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF/TOF), and Western blotting of sera from infected dogs. This study identified 33 ES product spots corresponding to 9 different proteins and 21 antigenic protein spots corresponding to 13 different proteins. Six antigenic proteins were identified for the first time. The present study extended the existing proteomic data of E. granulosus and provides further information regarding host-parasite interactions and survival mechanisms. The results of this study contribute to vaccination and immunodiagnoses for E. granulosus infections.

Quantitative analysis of ammonia-oxidizing bacteria in a combined system of MBR and worm reactors treating synthetic wastewater.

Science.gov (United States)

Liu, Jia; Tian, Yu; Wang, Dezhen; Lu, Yaobin; Zhang, Jun; Zuo, Wei

2014-12-01

The Static Sequencing Batch Worm Reactor (SSBWR) followed by the MBR (S-MBR) is one of the advanced excess sludge treatments. In this paper, the control MBR (C-MBR) and the SSBWR-MBR were operated in parallel to study the changes of NH3-N removal and ammonia oxidizing bacteria (AOB). The results showed that the capacity of NH3-N removal of the S-MBR was improved by the worm reactors along with the operation. The S-MBR was favorable because it selected for the higher activity of the ammonia oxidization and better cells appearance of the sludge. The five species (Nitrosomonas, Betaproteobacteria, Clostridium, Dechloromonas and Bacteria) were found to be significantly correlate with the ammonia oxidization functions and performance of NH3-N removal in the C-MBR and S-MBR. The Nitrosomonas, Betaproteobacteria and Dechloromonas remained and eventually enriched in the S-MBR played a primary role in the NH3-N removal of the S-MBR. Copyright © 2014 Elsevier Ltd. All rights reserved.

Surface Modification of Exfoliated Graphite Nano-Reinforcements, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Nano forms of graphite and carbon, such as flakes, worms, and tubes, can significantly modify the properties of polymers when used as reinforcements. Challenges...

Development of heat treated Zr-2.5% Nb alloy tubes for pressure tubes

International Nuclear Information System (INIS)

Saibaba, N.; Jha, S.K.; Tonpe, S.

2011-01-01

Zr-2.5% Nb alloy is the candidate material for pressure tubes of Pressurized Heavy Water Reactors (PHWR), and are manufactured in cold working condition while heat treated pressure tubes are used in RBMK and FUGEN type of reactors. The diametral creep of these tubes is the life limiting factor. This paper presents the extensive work carried out for the optimization of process parameters to manufacture heat treated Zr-2.5% Nb pressure tubes. Extensive dilactometry study was carried out to establish the transus temperature for the alloy and the effect of soaking temperature and cooling rate on the microstructure was characterized. On the basis of the study, water quenching (at 883 deg C) in the a b region with 20-25% primary a phase was selected, further cold worked, aged and finally autoclaved. Mechanical properties of the finished tubes were found to be comparable to the cold worked route. Large number of full sized tubes of about 700 - 800 mm long was produced to establish the repeatability. (author)

Comparison of worm development and host immune responses in natural hosts of schistosoma japonicum, yellow cattle and water buffalo

Directory of Open Access Journals (Sweden)

Yang Jianmei

2012-03-01

Full Text Available Abstract Background Yellow cattle and water buffalo are two of the most important natural hosts for Schistosoma japonicum in China. Previous observation has revealed that yellow cattle are more suited to the development of S. japonicum than water buffalo. Understanding more about the molecular mechanisms involved in worm development, as well as the pathological and immunological differences between yellow cattle and water buffalo post infection with S japonicum will provide useful information for the vaccine design and its delivery procedure. Results The worm length (p p p + T cells was higher in yellow cattle, while the percentage of CD8+ T cells was higher in water buffalo from pre-infection to 7 w post infection. The CD4/CD8 ratios were decreased in both species after challenge with schistosomes. Comparing with water buffalo, the IFN-γ level was higher and decreased significantly, while the IL-4 level was lower and increased gradually in yellow cattle from pre-infection to 7 w post infection. Conclusions In this study, we confirmed that yellow cattle were more suited to the development of S. japonicum than water buffalo, and more serious pathological damage was observed in infected yellow cattle. Immunological analysis suggested that CD4+ T cells might be an integral component of the immune response and might associate with worm development in yellow cattle. A shift from Th1 to Th2 type polarized immunity was only shown clearly in schistosome-infected yellow cattle, but no shift in water buffalo. The results provide valuable information for increased understanding of host-schistosome interactions, and for control of schistosomiasis.

An investigation on SA 213-Tube to SA 387-Tube plate using friction welding process

Energy Technology Data Exchange (ETDEWEB)

Rajan, S. Pandia; Kumaraswamidhas, L. A. [Indian Institute of Technology, Jharkhand (India); Kumaran, S. Senthil [RVS School of Engineering and Technology, Tamil Nadu (India); Muthukumaran, S. [National Institute of Technology, Tamil Nadu (India)

2016-01-15

Friction welding of tube to tube plate using an external tool (FWTPET) is a relatively newer solid state welding process used for joining tube to tube plate of either similar or dissimilar materials with enhanced mechanical and metallurgical properties. In the present study, FWTPET has been used to weld SA 213 (Grade T12) tube with SA 387 (Grade 22) tube plate. The welded samples are found to have satisfactory joint strength and the Energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) study showed that inter metallic compound is absent in the weld zone. The different weld joints have been identified and the phase composition is found using EDX and XRD. Microstructures have been analyzed using optical and Scanning electron microscopy (SEM). The mechanical properties such as hardness, compressive shear strength and peel test for different weld conditions are studied and the hardness survey revealed that there is increase in hardness at the weld interface due to grain refinement. The corrosion behavior for different weld conditions have been analyzed and the weld zone is found to have better corrosion resistance due to the influence of the grain refinement after FWTPET welding process. Hence, the present investigation is carried out to study the behavior of friction welded dissimilar joints of SA 213 tube and SA 387 tube plate joints and the results are presented. The present study confirms that a high quality tube to tube plate joint can be achieved using FWTPET process at 1120 rpm.

Abundance and population structure of eastern worm snakes in forest stands with various levels of overstory tree retention

Science.gov (United States)

Zachary I. Felix; Yong Wang; Callie Jo Schweitzer

2010-01-01

In-depth analyses of a species’ response to canopy retention treatments can provide insight into reasons for observed changes in abundance. The eastern worm snake (Carphophis amoenus amoenus Say) is common in many eastern deciduous forests, yet little is known about the ecology of the species in managed forests. We examined the relationship between...

PWR steam generator tubing sample library

International Nuclear Information System (INIS)

Anon.

1987-01-01

In order to compile the tubing sample library, two approaches were employed: (a) tubing sample replication by either chemical or mechanical means, based on field tube data and metallography reports for tubes already destructively examined; and (b) acquisition of field tubes removed from operating or retired steam generators. In addition, a unique mercury modeling concept is in use to guide the selection of replica samples. A compendium was compiled that summarizes field observations and morphologies of steam generator tube degradation types based on available NDE, destructive examinations, and field reports. This compendium was used in selecting candidate degradation types that were manufactured for inclusion in the tube library

Steam generator tube performance

International Nuclear Information System (INIS)

Tatone, O.S.; Pathania, R.S.

1984-10-01

A review of the performance of steam generator tubes in 116 water-cooled nuclear power reactors showed that tubes were plugged at 54 (46 percent) of the reactors. The number of tubes removed from service decreased from 4 692 (0.30 percent) in 1981 to 3 222 (0.20 percent) in 1982. The leading causes of tube failures were stress corrosion cracking from the primary side, stress corrosion cracking (or intergranular attack) from the secondary side and pitting corrosion. The lowest incidence of corrosion-induced defects from the secondary side occurred in reactors that have used only volatile treatment, with or without condensate demineralization

Steam generator tube performance

International Nuclear Information System (INIS)

Tatone, O.S.; Tapping, R.L.; Stipan, L.

1992-03-01

A survey of steam generator operating experience for 1986 has been carried out for 184 pressurized water and pressurized heavy-water reactors, and 1 water-cooled, graphite-moderated reactor. Tubes were plugged at 75 of the reactors (40.5%). In 1986, 3737 tubes were plugged (0.14% of those in service) and 3148 tubes were repaired by sleeving. A small number of reactors accounted for the bulk of the plugged tubes, a phenomenon consistent with previous years. For 1986, the available tubesheet sludge data for 38 reactors has been compiled into tabular form, and sludge/deposit data will be incorporated into all future surveys

Accounting for Film-Forming and Damping Properties of Lubricants in Worm Gear Design

Directory of Open Access Journals (Sweden)

S. A. Polyakov

2014-01-01

Full Text Available The paper offers to use a curve of changing vibration amplitude of the rotating moment on the worm shaft of reducer in the process of growing brake (loading moment as one of criteria of the worm reducer operability. A condition of reducer operability at the nominal moment is lack of vibrations of the rotating moment with a critical value of amplitude.It is shown that vibrations of rotating moment on a shaft of the electric engine, by their nature, are self-vibrations in the system with "negative friction". Values of the brake moment at which there is a sharp increase of vibration amplitude leading to operability loss correspond to the nominal moment for this reducer or to the brake moment, corresponding to the maximum efficiency. It is shown that different lubricants differently influence on the generation of self-vibrations. The most efficient damping occurs when using oil with the additive "Striboil", and the reason of falling efficiency at the excess of the nominal moment is essentially increased energy losses at generation of vibrations with "negative friction", especially when approaching to the resonance area. Thus, taking into account a nature of damping vibrations, with using different lubricants, allows us to increase the permissible tension since the more is a damping value the more is a brake moment corresponding to the maximum efficiency. It is noted that, when using the additives to oils, a growth of the permissible tension is caused by the processes of film formation increasing the real contact area, which increases its share of the nominal contact area determined by the Hertz formula.

Sealed ion accelerator tubes (survey)

International Nuclear Information System (INIS)

Voitsik, L.R.

1985-01-01

The first publications on developing commercial models of small-scale sealed accelerator tubes in which neutrons are generated appeared in the foreign press in 1954 to 1957; they were very brief and were advertising-oriented. The tubes were designed for neutron logging of oil wells instead of ampule neutron sources (Po + Be, Ra + Be). Later, instruments of this type began to be called neutron tubes from the resulting neutron radiation that they gave off. In Soviet Union a neutron tube was developed in 1958 in connection with the development of the pulsed neutron-neutron method of studying the geological profile of oil wells. At that time the tube developed was intended, in the view of its inventors, to replace standard isotope sources with constant neutron yield. A fairly detailed survey of neutron tubes was made in the studies. 8 refs., 8 figs

Steam generator tube integrity program

International Nuclear Information System (INIS)

Dierks, D.R.; Shack, W.J.; Muscara, J.

1996-01-01

A new research program on steam generator tubing degradation is being sponsored by the U.S. Nuclear Regulatory Commission (NRC) at Argonne National Laboratory. This program is intended to support a performance-based steam generator tube integrity rule. Critical areas addressed by the program include evaluation of the processes used for the in-service inspection of steam generator tubes and recommendations for improving the reliability and accuracy of inspections; validation and improvement of correlations for evaluating integrity and leakage of degraded steam generator tubes, and validation and improvement of correlations and models for predicting degradation in steam generator tubes as aging occurs. The studies will focus on mill-annealed Alloy 600 tubing, however, tests will also be performed on replacement materials such as thermally-treated Alloy 600 or 690. An overview of the technical work planned for the program is given

Tube plug removal machine

International Nuclear Information System (INIS)

Hawkins, P.J.

1987-01-01

In a nuclear steam generator wherein some faulty tubes have been isolated by mechanical plugging, to remove a selected plug without damaging the associated tube, a plug removal machine is used. The machine drills into a plug portion with a tap drill bit having a drill portion a tap portion and a threaded portion, engaging that plug portion with the threaded portion after the drilled hole has been threaded by the tap portion thereof, and removing a portion of the plug in the tube with a counterbore drill bit mounted concentrically about the tap drill bit. A trip pin and trip spline disengage the tap drill bit from the motor. The counterbore drill bit is thereafter self-centered with respect to the tube and plug about the now stationary tap drill bit. After a portion of the plug has been removed by the counterbore drill bit, pulling on the top drill bit by grippers on slots will remove the remaining plug portion from the tube. (author)

A novel extracellular gut symbiont in the marine worm Priapulus caudatus (Priapulida) reveals an alphaproteobacterial symbiont clade of the Ecdysozoa

DEFF Research Database (Denmark)

Kroer, Paul; Kjeldsen, Kasper Urup; Nyengaard, Jens Randel

2016-01-01

Priapulus caudatus (phylum Priapulida) is a benthic marine predatory worm with a cosmopolitan distribution. In its digestive tract we detected symbiotic bacteria that were consistently present in specimens collected over eight years from three sites at the Swedish west coast. Based on their 16S r...

Falling film evaporation on a tube bundle with plain and enhanced tubes

International Nuclear Information System (INIS)

Habert, M.

2009-04-01

The complexities of two-phase flow and evaporation on a tube bundle present important problems in the design of heat exchangers and the understanding of the physical phenomena taking place. The development of structured surfaces to enhance boiling heat transfer and thus reduce the size of evaporators adds another level of complexity to the modeling of such heat exchangers. Horizontal falling film evaporators have the potential to be widely used in large refrigeration systems and heat pumps, in the petrochemical industry and for sea water desalination units, but there is a need to improve the understanding of falling film evaporation mechanisms to provide accurate thermal design methods. The characterization of the effect of enhanced surfaces on the boiling phenomena occurring in falling film evaporators is thus expected to increase and optimize the performance of a tube bundle. In this work, the existing LTCM falling film facility was modified and instrumented to perform falling film evaporation measurements on single tube row and a small tube bundle. Four types of tubes were tested including: a plain tube, an enhanced condensing tube (Gewa-C+LW) and two enhanced boiling tubes (Turbo-EDE2 and Gewa-B4) to extend the existing database. The current investigation includes results for two refrigerants, R134a and R236fa, at a saturation temperature of T sat = 5 °C, liquid film Reynolds numbers ranging from 0 to 3000, at heat fluxes between 20 and 60 kW/m² in pool boiling and falling film configurations. Measurements of the local heat transfer coefficient were obtained and utilized to improve the current prediction methods. Finally, the understanding of the physical phenomena governing the falling film evaporation of liquid refrigerants has been improved. Furthermore, a method for predicting the onset of dry patch formation has been developed and a local heat transfer prediction method for falling film evaporation based on a large experimental database has been proposed

Steam generator tube performance

International Nuclear Information System (INIS)

Tatone, O.S.; Pathania, R.S.

1982-04-01

The performance of steam generator tubes in water-cooled nuclear power reactors has been reviewed for 1980. Tube defects occurred at 38% of the 97 reactors surveyed. This is a marginal improvement over 1979 when defects occurred at 41% of the reactors. The number of failed tubes was also lower, 0.14% of the tubes in service in 1980 compared with 0.20% of those in service in 1979. Analysis of the causes of these failures indicates that stress corrosion cracking was the leading failure mechanism. Reactors that used all-volatile treatment of secondary water, with or without full-flow condensate demineralization since start-up showed the lowest incidence of corrosion-related defects

Agar Sediment Test for Assessing the Suitability of Organic Waste Streams for Recovering Nutrients by the Aquatic Worm Lumbriculus variegatus.

Directory of Open Access Journals (Sweden)

Bob Laarhoven

Full Text Available An agar sediment test was developed to evaluate the suitability of organic waste streams from the food industry for recovering nutrients by the aquatic worm Lumbriculus variegatus (Lv. The effects of agar gel, sand, and food quantities in the sediment test on worm growth, reproduction, and water quality were studied. Agar gel addition ameliorated growth conditions by reducing food hydrolysis and altering sediment structure. Best results for combined reproduction and growth were obtained with 0.6% agar-gel (20 ml, 10 g. fine sand, 40 g. coarse sand, and 105 mg fish food (Tetramin. With agar gel, ingestion and growth is more the result of addition of food in its original quality. Final tests with secondary potato starch sludge and wheat bran demonstrated that this test is appropriate for the comparison of solid feedstuffs and suspended organic waste streams. This test method is expected to be suitable for organic waste studies using other sediment dwelling invertebrates.

The dynamic single-tube concept; Le mono-tube dynamique

Energy Technology Data Exchange (ETDEWEB)

Rivet, P. [Ste MC International (France)

1997-12-31

In the framework of greenhouse gas emission reduction and the utilization of cooling intermediate fluids with indirect refrigerating systems, a new concept of dynamical single-tube has been developed, which allows for the simultaneous cold distribution from a centralized plant towards various required temperature systems (as for example in a supermarket refrigerating system) with optimized efficiency, fluid flow and defrosting conditions; moreover, the dynamic single-tube concept is very well adapted to two-phase flows

Fuel assembly and fuel cladding tube

International Nuclear Information System (INIS)

Tsutsumi, Shinro; Ito, Ken-ichi; Inagaki, Masatoshi; Nakajima, Junjiro.

1996-01-01

A fuel cladding tube is a zirconium liner tube formed by lining a pure zirconium layer on the inner side of a zirconium alloy tube. The fuel cladding tube is formed by extrusion molding of a composite billet formed by inserting a pure zirconium billet into a zirconium alloy billet. Accordingly, the pure zirconium layer and the zirconium alloy tube are strongly joined by metal bond. The fuel cladding tube has an external oxide film on the outer surface of the zirconium alloy tube and an internal oxide film on the inner side of the pure zirconium layer. The external oxide film has a thickness preferably of about 1μm. The internal oxide film has a thickness of not more than 10μm, preferably, from 1 to 5μm. With such a constitution, flaws to be formed on both inner and outer surfaces of the cladding tube upon assembling a fuel assembly can be reduced thereby enabling to reduce the amount of hydrogen absorbed to the cladding tube. (I.N.)

Comparison of digoxin concentration in plastic serum tubes with clot activator and heparinized plasma tubes.

Science.gov (United States)

Dukić, Lora; Simundić, Ana-Maria; Malogorski, Davorin

2014-01-01

Sample type recommended by the manufacturer for the digoxin Abbott assay is either serum collected in glass tubes or plasma (sodium heparin, lithium heparin, citrate, EDTA or oxalate as anticoagulant) collected in plastic tubes. In our hospital samples are collected in plastic tubes. Our hypothesis was that the serum sample collected in plastic serum tube can be used interchangeably with plasma sample for measurement of digoxin concentration. Our aim was verification of plastic serum tubes for determination of digoxin concentration. Concentration of digoxin was determined simultaneously in 26 venous blood plasma (plastic Vacuette, LH Lithium heparin) and serum (plastic Vacuette, Z Serum Clot activator; both Greiner Bio-One GmbH, Kremsmünster, Austria) samples, on Abbott AxSYM analyzer using the original Abbott Digoxin III assay (Abbott, Wiesbaden, Germany). Tube comparability was assessed using the Passing Bablok regression and Bland-Altman plot. Serum and plasma digoxin concentrations are comparable. Passing Bablok intercept (0.08 [95% CI = -0.10 to 0.20]) and slope (0.99 [95% CI = 0.92 to 1.11]) showed there is no constant or proportional error. Blood samples drawn in plastic serum tubes and plastic plasma tubes can be interchangeably used for determination of digoxin concentration.

Dermatology on YouTube.

Science.gov (United States)

Boyers, Lindsay N; Quest, Tyler; Karimkhani, Chante; Connett, Jessica; Dellavalle, Robert P

2014-06-15

YouTube, reaches upwards of six billion users on a monthly basis and is a unique source of information distribution and communication. Although the influence of YouTube on personal health decision-making is well established, this study assessed the type of content and viewership on a broad scope of dermatology related content on YouTube. Select terms (i.e. dermatology, sun protection, skin cancer, skin cancer awareness, and skin conditions) were searched on YouTube. Overall, the results included 100 videos with over 47 million viewers. Advocacy was the most prevalent content type at 24% of the total search results. These 100 videos were "shared" a total of 101,173 times and have driven 6,325 subscriptions to distinct YouTube user pages. Of the total videos, 35% were uploaded by or featured an MD/DO/PhD in dermatology or other specialty/field, 2% FNP/PA, 1% RN, and 62% other. As one of the most trafficked global sites on the Internet, YouTube is a valuable resource for dermatologists, physicians in other specialties, and the general public to share their dermatology-related content and gain subscribers. However, challenges of accessing and determining evidence-based data remain an issue.

"Koko et les lunettes magiques": An educational entertainment tool to prevent parasitic worms and diarrheal diseases in Côte d'Ivoire.

Directory of Open Access Journals (Sweden)

Clémence Essé

2017-09-01

Full Text Available Integrated control programs, emphasizing preventive chemotherapy along with health education, can reduce the incidence of soil-transmitted helminthiasis and schistosomiasis. The aim of this study was to develop an educational animated cartoon to improve school children's awareness regarding soil-transmitted helminthiasis, diarrheal diseases, and related hygiene practices in Côte d'Ivoire. The key messages included in the cartoon were identified through prior formative research to specifically address local knowledge gaps.In a first step, preliminary research was conducted to assess the knowledge, attitudes, practices, and beliefs of school-aged children regarding parasitic worm infections and hygiene, to identify key health messages to be included in an animated cartoon. Second, an animated cartoon was produced, which included the drafting of the script and story board, and the production of the cartoon's initial version. Finally, the animated cartoon was pilot tested in eight selected schools and further fine-tuned.According to the questionnaire results, children believed that the consumption of sweet food, eating without washing their hands, sitting on the floor, and eating spoiled food were the main causes of parasitic worm infections. Abdominal pain, diarrhea, lack of appetite, failure to grow, and general fatigue were mentioned as symptoms of parasitic worm infections. Most of the children knew that they should go to the hospital for treatment if they experienced symptoms of parasitic worm diseases. The animated cartoon titled "Koko et les lunettes magiques" was produced by Afrika Toon, in collaboration with a scientific team composed of epidemiologists, civil engineers, and social scientists, and the local school children and teachers. Pilot testing of the animated cartoon revealed that, in the short term, children grasped and kept key messages. Most of the children who were shown the cartoon reported to like it. Acceptance of the

"Koko et les lunettes magiques": An educational entertainment tool to prevent parasitic worms and diarrheal diseases in Côte d'Ivoire.

Science.gov (United States)

Essé, Clémence; Koffi, Véronique A; Kouamé, Abel; Dongo, Kouassi; Yapi, Richard B; Moro, Honorine M; Kouakou, Christiane A; Palmeirim, Marta S; Bonfoh, Bassirou; N'Goran, Eliézer K; Utzinger, Jürg; Raso, Giovanna

2017-09-01

Integrated control programs, emphasizing preventive chemotherapy along with health education, can reduce the incidence of soil-transmitted helminthiasis and schistosomiasis. The aim of this study was to develop an educational animated cartoon to improve school children's awareness regarding soil-transmitted helminthiasis, diarrheal diseases, and related hygiene practices in Côte d'Ivoire. The key messages included in the cartoon were identified through prior formative research to specifically address local knowledge gaps. In a first step, preliminary research was conducted to assess the knowledge, attitudes, practices, and beliefs of school-aged children regarding parasitic worm infections and hygiene, to identify key health messages to be included in an animated cartoon. Second, an animated cartoon was produced, which included the drafting of the script and story board, and the production of the cartoon's initial version. Finally, the animated cartoon was pilot tested in eight selected schools and further fine-tuned. According to the questionnaire results, children believed that the consumption of sweet food, eating without washing their hands, sitting on the floor, and eating spoiled food were the main causes of parasitic worm infections. Abdominal pain, diarrhea, lack of appetite, failure to grow, and general fatigue were mentioned as symptoms of parasitic worm infections. Most of the children knew that they should go to the hospital for treatment if they experienced symptoms of parasitic worm diseases. The animated cartoon titled "Koko et les lunettes magiques" was produced by Afrika Toon, in collaboration with a scientific team composed of epidemiologists, civil engineers, and social scientists, and the local school children and teachers. Pilot testing of the animated cartoon revealed that, in the short term, children grasped and kept key messages. Most of the children who were shown the cartoon reported to like it. Acceptance of the animated cartoon was high

Bacterial Biofilms in Jones Tubes.

Science.gov (United States)

Ahn, Eric S; Hauck, Matthew J; Kirk Harris, Jonathan; Robertson, Charles E; Dailey, Roger A

To investigate the presence and microbiology of bacterial biofilms on Jones tubes (JTs) by direct visualization with scanning electron microscopy and polymerase chain reaction (PCR) of representative JTs, and to correlate these findings with inflammation and/or infection related to the JT. In this study, prospective case series were performed. JTs were recovered from consecutive patients presenting to clinic for routine cleaning or recurrent irritation/infection. Four tubes were processed for scanning electron microscopy alone to visualize evidence of biofilms. Two tubes underwent PCR alone for bacterial quantification. One tube was divided in half and sent for scanning electron microscopy and PCR. Symptoms related to the JTs were recorded at the time of recovery. Seven tubes were obtained. Five underwent SEM, and 3 out of 5 showed evidence of biofilms (60%). Two of the 3 biofilms demonstrated cocci and the third revealed rods. Three tubes underwent PCR. The predominant bacteria identified were Pseudomonadales (39%), Pseudomonas (16%), and Staphylococcus (14%). Three of the 7 patients (43%) reported irritation and discharge at presentation. Two symptomatic patients, whose tubes were imaged only, revealed biofilms. The third symptomatic patient's tube underwent PCR only, showing predominantly Staphylococcus (56%) and Haemophilus (36%) species. Two of the 4 asymptomatic patients also showed biofilms. All symptomatic patients improved rapidly after tube exchange and steroid antibiotic drops. Bacterial biofilms were variably present on JTs, and did not always correlate with patients' symptoms. Nevertheless, routine JT cleaning is recommended to treat and possibly prevent inflammation caused by biofilms.

Rectangular drift tube characteristics

International Nuclear Information System (INIS)

Denisov, D.S.; Musienko, Yu.V.

1985-01-01

Results on the study of the characteristics of a 50 x 100 mm aluminium drift tube are presented. The tube was filled with argon-methane and argon-isobutane mixtures. With 16 per cent methane concentration the largest deviation from a linear relation between the drift time and the drift path over 50 mm is less than 2 mm. The tube filled with argon-isobutane mixture is capable of operating in a limited streamer mode

Chest tube insertion - series (image)

Science.gov (United States)

Chest tubes are inserted to drain blood, fluid, or air and allow full expansion of the lungs. The tube is placed in the pleural space. The area where the tube will be inserted is numbed (local anesthesia). The patient may also be sedated. The chest ...

Bioaccumulation of As, Cd, Cr, Hg(II), and MeHg in killifish (Fundulus heteroclitus) from amphipod and worm prey

Energy Technology Data Exchange (ETDEWEB)

Dutton, Jessica, E-mail: dutton.jess@gmail.com; Fisher, Nicholas S., E-mail: nfisher@notes.cc.sunysb.edu

2011-08-15

Elevated metal levels in fish are a concern for the fish themselves, their predators, and possibly humans who consume contaminated seafood. Metal bioaccumulation models often rely on assimilation efficiencies (AEs) of ingested metals and loss rate constants after dietary exposure (k{sub ef}s). These models can be used to better understand processes regulating metal accumulation and can be used to make site-specific predictions of metal concentrations in animal tissues. Fish often consume a varied diet, and prey choice can influence these two parameters. We investigated the trophic transfer of As, Cd, Cr, Hg(II), and methylmercury (MeHg) from a benthic amphipod (Leptocheirus plumulosus) and an oligochaete (Lumbriculus variegatus) to killifish (Fundulus heteroclitus) using gamma-emitting radioisotopes. Except for MeHg, AEs varied between prey type. AEs were highest for MeHg (92%) and lowest for Cd (2.9-4.5%) and Cr (0.2-4%). Hg(II) showed the largest AE difference between prey type (14% amphipods, 24% worms). For Cd and Hg(II) k{sub ef}s were higher after consuming amphipods than consuming worms. Tissue distribution data shows that Cd and Hg(II) were mainly associated with the intestine, whereas As and MeHg were transported throughout the body. Calculated trophic transfer factors (TTFs) suggest that MeHg is likely to biomagnify at this trophic step at all ingestion rates, whereas As, Cd, Cr, and Hg(II) will not. Data collected in this study and others indicate that using one prey item to calculate AE and k{sub ef} could lead to an over- or underestimation of these parameters. - Highlights: {yields} We investigated the trophic transfer of metals to killifish from amphipod and worm prey. {yields} Prey choice influences metal accumulation from the diet. {yields} Only MeHg is likely to biomagnify at this trophic step.

Boiling and condensation in microfin tubes

Science.gov (United States)

Schlager, Lynn M.

A general overview of microfin tubes and their applications is presented. Manufacturing processes, commercial availability, experimental heat transfer, and pressure drop data for various refrigerants (including alternative refrigerants and refrigerant-oil mixtures), physical mechanisms of enhancement, and the incorporation of microfin tubes in common heat exchanger configurations are discussed. Microfin tubes, also known by various trade names, are characterized by numerous small fins which typically spiral down the inside wall of tubes at angles ranging from 10 to 30 degrees. The number of fins ranges from 48 to 70 with typical fin heights of 0.12 to 0.30 mm (fin height generally less than 3 percent of the inside diameter of the tube). Fin shapes may vary and the inside surface area of microfin tubes is 10 to 70 percent greater than the area of equivalent smooth tubes. Heat transfer can be enhanced by up to a factor of three with microfin tubes.

Flux tubes at finite temperature

Energy Technology Data Exchange (ETDEWEB)

Cea, Paolo [INFN, Sezione di Bari,Via G. Amendola 173, I-70126 Bari (Italy); Dipartimento di Fisica dell’Università di Bari,Via G. Amendola 173, I-70126 Bari (Italy); Cosmai, Leonardo [INFN, Sezione di Bari,Via G. Amendola 173, I-70126 Bari (Italy); Cuteri, Francesca; Papa, Alessandro [Dipartimento di Fisica, Università della Calabria & INFN-Cosenza,Ponte Bucci, cubo 31C, I-87036 Rende (Cosenza) (Italy)

2016-06-07

The chromoelectric field generated by a static quark-antiquark pair, with its peculiar tube-like shape, can be nicely described, at zero temperature, within the dual superconductor scenario for the QCD confining vacuum. In this work we investigate, by lattice Monte Carlo simulations of the SU(3) pure gauge theory, the fate of chromoelectric flux tubes across the deconfinement transition. We find that, if the distance between the static sources is kept fixed at about 0.76 fm ≃1.6/√σ and the temperature is increased towards and above the deconfinement temperature T{sub c}, the amplitude of the field inside the flux tube gets smaller, while the shape of the flux tube does not vary appreciably across deconfinement. This scenario with flux-tube “evaporation” above T{sub c} has no correspondence in ordinary (type-II) superconductivity, where instead the transition to the phase with normal conductivity is characterized by a divergent fattening of flux tubes as the transition temperature is approached from below. We present also some evidence about the existence of flux-tube structures in the magnetic sector of the theory in the deconfined phase.

Managing a chest tube and drainage system.

Science.gov (United States)

Durai, Rajaraman; Hoque, Happy; Davies, Tony W

2010-02-01

Intercostal drainage tubes (ie, chest tubes) are inserted to drain the pleural cavity of air, blood, pus, or lymph. The water-seal container connected to the chest tube allows one-way movement of air and liquid from the pleural cavity. The container should not be changed unless it is full, and the chest tube should not be clamped unnecessarily. After a chest tube is inserted, a nurse trained in chest-tube management is responsible for managing the chest tube and drainage system. This entails monitoring the chest-tube position, controlling fluid evacuation, identifying when to change or empty the containers, and caring for the tube and drainage system during patient transport. This article provides an overview of indications, insertion techniques, and management of chest tubes. Copyright 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Strong, corrosion-resistant aluminum tubing

Science.gov (United States)

Reed, M. W.; Adams, F. F.

1980-01-01

When aluminum tubing having good corrosion resistance and postweld strength is needed, type 5083 alloy should be considered. Chemical composition is carefully controlled and can be drawn into thin-wall tubing with excellent mechanical properties. Uses of tubing are in aircraft, boats, docks, and process equipment.

Bottom nozzle to guide tube connection

International Nuclear Information System (INIS)

Bryan, W.J.

1991-01-01

This patent describes a nuclear fuel assembly which includes an upper end fitting and a lower end fitting spaced therefrom and connected thereto by elongated guide tubes of one alloy having an open upper end and a closed lower end with spaced fuel element retaining grids mounted on the guide tubes therebetween, the closed lower ends of the guide tubes including a threaded central passageway and the attachment of the guide tubes to the lower end fitting of another alloy. It comprises: an externally threaded bolt with a first end threadably received in the threaded central passageway of the lower end of the guide tube and a head at the other end of the side of the lower end fitting opposite the guide tube; an interruption in the external threads of the bolt which forms a groove which communicates the interior of the guide tube with the side of the lower end fitting opposite the guide tube and enhances its frictional engagement with the threaded central passageway, thereby to hold and attach the guide tube and lower end fitting firmly together, even through a series of temperature cycles

Development of the double-wall-tube steam generator. Evaluation of inner tube leak detection system

International Nuclear Information System (INIS)

Teraoku, Takuji; Kisohara, Naoyuki

1995-01-01

A double-wall-tube steam generator (DWT-SG) is considered to have possibility of eliminating a secondary heat transport system to realize a reliable and simplified FBR plant. Thus, basic tests for inner/outer tube leak detection and prototypical leak tests by use of the 1MWt DWT-SG model have been performed to evaluate the feasibility of DWT-SG. Their results demonstrated that the inner leak detection system can definitely detect a steam leak from an inner tube flaw. Analyses of the inner tube leak and detection behavior obtained in the 1MWt DWT-SG test enabled to estimate the performance of the inner tube detection system of the commercial DWT-SG system. (author)

Cross-talk in straw tube chambers

Energy Technology Data Exchange (ETDEWEB)

Marzec, J. E-mail: janusz.marzec@ire.pw.edu.pl

2003-05-11

An analytical model of the signal transmission between neighboring straw tubes with resistive cathodes (cross-talk) is presented. The dependence of the cross-talk level on the cathode resistance, tube length, particle detection point, the distance of the tube from the shielding planes, and termination of the tube ends is analyzed.

Cross-talk in straw tube chambers

International Nuclear Information System (INIS)

Marzec, J.

2003-01-01

An analytical model of the signal transmission between neighboring straw tubes with resistive cathodes (cross-talk) is presented. The dependence of the cross-talk level on the cathode resistance, tube length, particle detection point, the distance of the tube from the shielding planes, and termination of the tube ends is analyzed

Tubing cutter for tight spaces

Science.gov (United States)

Girala, A. S.

1980-01-01

Cutter requires few short swings of handle to rotate its cutting edge full 360 around tube. It will cut tubing installed in confined space that prevents free movement of conventional cutter. Cutter is snapped onto tube and held in place by spring-loaded clamp. Screw ratchet advances cutting wheel.

Evaluation of the Effect of Tube Pitch and Surface Alterations on Temperature Field at Sprinkled Tube Bundle

Directory of Open Access Journals (Sweden)

Kracík Petr

2015-01-01

Full Text Available Water flowing on a sprinkled tube bundle forms three basic modes: It is the Droplet mode (liquid drips from one tube to another, the Jet mode (with an increasing flow rate droplets merge into a column and the Membrane (Sheet mode (with further increasing of falling film liquid flow rate columns merge and create sheets between the tubes. With sufficient flow rate sheets merge at this state and the tube bundle is completely covered by a thin liquid film. There are several factors influencing the individual mode types as well as heat transfer. Beside the above mentioned falling film liquid flow rate they are for instance tube diameters, tube pitches in a tube bundle or a physical condition of a falling film liquid. This paper presents a summary of data measured at atmospheric pressure at a tube bundle consisting of copper tubes of 12 milimeters diameter and of the studied tube length one meter. The tubes are positioned horizontally one above another with the tested pitches of 15, 20, 25 and 30 mm and there is a distribution tube placed above them with water flowing out. The thermal gradient of 15–40 has been tested with all pitches where the falling film liquid’s temperature at the inlet of the distribution tube was 15 °C. The liquid was heated during the flow through the exchanger and the temperature of the sprinkled (heater liquid at the inlet of the exchanger with a constant flow rate about 7.2 litres per minute was 40 °C. The tested flow of the falling film liquid ranged from 1.0 to 13.0 litres per minute. Sequences of 180 exposures have been recorded in partial flow rate stages by thermographic camera with record frequency of 30 Hz which were consequently assessed using the Matlab programme. This paper presents results achieved at the above mentioned pitches and at three types of tube bundle surfaces.

An investigation on mechanical property of commercial copper tube to aluminium 2025 tube plate by FWTPET process

Energy Technology Data Exchange (ETDEWEB)

Kannan, S., E-mail: kannan.dgl201127@gmail.com [Department of Mechanical Engineering and Mining Machinery Engineering, Indian Institute of Technology (ISM), Dhanbad, Jharkhand 826004 (India); Senthil Kumaran, S., E-mail: sskumaran@ymail.com [Research and Development Center, Department of Mechanical Engineering, RVS Educational Trust' s Group of Institutions, RVS School of Engineering and Technology, Dindigul, Tamilnadu 624005 (India); Kumaraswamidhas, L.A., E-mail: lakdhas1978@gmail.com [Department of Mechanical Engineering and Mining Machinery Engineering, Indian Institute of Technology (ISM), Dhanbad, Jharkhand 826004 (India)

2016-07-05

Frictional welding of tube to tube plate by external tool (FWTPET) posses wide spread industrial in mass production process for joint similar and dissimilar materials. Frictional welding process allows welding of some materials that are exceptionally hard to fusion weld. The good quality joint between the tube and tube plate is achieved by selecting the proper process parameter. In this present research, the frictional welding is done between the Aluminium 2025 tube plate and commercial copper tube possessing a clearance fit of 0.1 mm between tube and hole. In this study, two conditions were considered while handing out this experiment. The condiction1 is tube without holes [WOH] and condition 2 is tube with holes [WH] on the tube circumference. In total, twenty seven work pieces have been considered separately for both conditions and the mechanical property such as compression strength and hardness value has been measured for the both set of work piece in two conditions to analysis the joint strength of the welding process. Taguchi L{sub 27} orthogonal array has been used in this process to identify the process parameter which influences the joint strength of the welded samples. ANOVA method is used to calculate the percentage of contribution by each process parameter which influences the better joint strength. Genetic algorithm is used to authenticate the outcome obtained from the both experimental value and optimization value. Scanning Electron Microscope (SEM) and Energy-dispersive X-ray analysis (EDX) has been performed to probe microstructures and chemical compositions for work piece without holes which has higher mechanical property. - Highlights: • FWTPET for dissimilar metals commercial copper tube and Al 2025 tube plate. • The hardness value for tube without holes are 180.988 Hv. • The compression strength for tube without holes are 376.05 MPa. • SEM confirm heat production is done to melt parent metal by diffusion process. • EDX prove no trace

Internal heat exchange tubes for industrial furnaces

Energy Technology Data Exchange (ETDEWEB)

Hoetzl, M.; Lingle, T.M.

1992-05-26

This patent describes a method for cooling the work within an industrial furnace. It comprises providing a longitudinally extending outer tube which extends into the furnace having a closed axial end and an open axial end; providing a preformed inner tube open at both ends within the outer tube; injecting a coolant into the inner tube so that the coolant flows from one axial end of the tube out the opposite end adjacent the closed end of the outer tube, and from the closed end of the outer tube to the open end thereof; circulating a gas within the furnace against the outer tube to effect heat transfer therewith.

Square through tube

International Nuclear Information System (INIS)

Akita, Junji; Honma, Toei.

1975-01-01

Object: To provide a square through tube involving thermal movement in pipelines such as water supply pump driving turbine exhaust pipe (square-shaped), which is wide in freedom with respect to shape and dimension thereof for efficient installation at site. Structure: In a through tube to be airtightly retained for purpose of decontamination in an atomic power plant, comprising a seal rubber plate, a band and a bolt and a nut for securing said plate, the seal rubber plate being worked into the desired shape so that it may be placed in intimate contact with the concrete floor surface by utilization of elasticity of rubber, thereby providing airtightness at a corner portion of the square tube. (Kamimura, M.)

Process and device for locating a defective tube, particularly in the tube bundle of a steam generator

International Nuclear Information System (INIS)

Denis, Jean.

1977-01-01

A process is described for locating a defective tube, particularly in the tube bundle of a steam generator of the reversed U tube kind with the ends connected to a tube plate, marking with the bottom of the generator casing a space separated into two adjacent collectors, respectively for the inlet and outlet of a primary fluid flowing inside the tubes of the bundle, these being externally washed by a secondary vaporizing fluid. In this process a television camera that can be inserted into the casing is used. This process consists in transmitting to a display system outside the generator an image of the tube plate in each collector by means of a directional television camera and then to place over this image a luminous marker to locate the end or the faulty tube [fr

Gastrostomy feeding tube - bolus

Science.gov (United States)

Feeding - gastrostomy tube - bolus; G-tube - bolus; Gastrostomy button - bolus; Bard Button - bolus; MIC-KEY - bolus ... KEY, 3 to 8 weeks after surgery. These feedings will help your child grow strong and healthy. ...

Comparison between female and male of demand of sulfur-containing amino acid of domestic silk worms

International Nuclear Information System (INIS)

Shinbo, Hiroshi; Inokuchi, Tamio

1977-01-01

Comparison of the demand of sulfur-containing amino acid (methionine and cystine) of young domestic silk worms was made between female and male using amino acid diet, and the relation among growth, blood protein and ninhydrin positive substance concentration was discussed. When 3 mg/g of methionine was added to the diet, the growth promotion effect of cystine was hardly recognized for male, while no addition of cystine showed inferior growth for female, however the normal growth was recognized when more than 1 mg/g was added. Accordingly, it is recognized that the female requires more sulfur-containing amino acid than the male. The relationship between the addition of methionine and cystine and the blood protein concentration showed the tendency to conform to the growth approximately. In the effects of blood protein concentration due to diet condition, the difference between female and male were recognized. The relationship between the addition of methionine and cystine in the diet and the ninhydrin positive substance concentration was high in case of the lack of methionine, but the relationship to cystine addition and the difference between female and male were not clear. As a result of measuring 14 CO 2 exhaled from the young worms injected with DL-cystine-1- 14 C, the resolution of cystine in the living body of female was lower than that of male. (Iwakiri, K.)

Salinity and Temperature Tolerance of the Nemertean Worm Carcinonemertes errans, an Egg Predator of the Dungeness Crab.

Science.gov (United States)

Dunn, Paul H; Young, Craig M

2015-04-01

Estuaries can be harsh habitats for the marine animals that enter them, but they may also provide these species with sub-saline refuges from their parasites. The nemertean egg predator Carcinonemertes errans is known to occur less frequently and in smaller numbers on its host, the Dungeness crab Metacarcinus magister, when the hosts are found within estuaries. We examined the temperature and salinity tolerances of C. errans to determine if this observed distribution represents a true salinity refuge. We monitored the survival of juvenile and larval worms exposed to ecologically relevant salinities (5-30) and temperatures (8-20 °C) over the course of several days under laboratory conditions. Juvenile worms were unaffected by the experimental temperature levels and exhibited robustness to salinity treatments 25 and 30. However, significant mortality was seen at salinity treatments 20 and below. Larvae were less tolerant than juveniles to lowered salinity and were also somewhat more susceptible to the higher temperatures tested. Given that the Dungeness crab can tolerate forays into mesohaline (salinity 5-18) waters for several days at a time, our findings suggest that salinity gradients play an important role in creating a parasite refuge for this species within the estuaries of the Pacific Northwest. © 2015 Marine Biological Laboratory.

Feedwater heater tube-to-tubesheet connections

International Nuclear Information System (INIS)

Yokell, S.

1993-01-01

This paper discusses some practical aspects of expanded, welded, and welded-and-expanded feedwater heater tube-to-tubesheet joints. It outlines elastic-plastic tube expanding theory. It examines uniform-pressure-expanded tube joint strength and correlating roller-expanded joint strength with wall reduction and rolling torque. For materials subject to stress-corrosion cracking (SCC), it recommends heat treating tube ends before expanding. For materials subject to fatigue and tube-end cracking, it advocates two-stage expanding: (1) expanding enough to create firm tube-hole contact over the full tubesheet thickness; and (2) re-expanding at full pressure or torque. The paper emphasizes the desirability of segregating heats of tubing, mapping the tube-heat locations and making the heat map a permanent part of the heater maintenance file. It recommends when to provide TEMA/HEI Power Plant Standard annular grooves for roller-expanding and provides an equation for determining optimum groove width for uniform-pressure expanding. The paper also reviews welding requirements for welds of tubes to tubesheets. The review covers front-face welding before and after expanding and the reasons for welding first. It outlines current thinking about definitions of strength- and seal-welds of front-face welded joint in terms of their functions and load-carrying abilities. It presents a proposal for determining the required size of strength welds for use in Section VIII of the ASME Boiler and Pressure Vessel Code (the Code). It shows why welded-and-expanded feedwater heater tube-to-tubesheet joints should be full-strength and full-depth expanded. It makes recommendations for pressure- and leak-testing. This work also proposes the industry consider butt welding the tubes to the steam-side face of the tubesheet as a regular method of tube joining. The results of a survey of manufacturers practices are appended. 30 refs., 14 figs

Pressure loss characteristics of LSTF steam generator heat-transfer tubes. Pressure loss increase due to tube internal instruments

International Nuclear Information System (INIS)

Suzuki, Mitsuhiro

1994-11-01

The steam generator of the Large-Scale Test Facility (LSTF) includes 141 heat-transfer U-tubes with different lengths. Six U-tubes among them are furnished with 15 or 17 probe-type instruments (conduction probe with a thermocouple; CPT) protuberant into the primary side of the U-tubes. Other 135 U-tubes are not instrumented. This results in different hydraulic conditions between the instrumented and non-instrumented U-tubes with the same length. A series of pressure loss characteristics tests was conducted at a test apparatus simulating both types of U-tube. The following pressure loss coefficient (K CPT ) was reduced as a function of Reynolds number (Re) from these tests under single-phase water flow conditions. K CPT =0.16 5600≤Re≤52820, K CPT =60.66xRe -0.688 2420≤Re≤5600, K CPT =2.664x10 6 Re -2.06 1371≤Re≤2420. The maximum uncertainty is 22%. By using these results, the total pressure loss coefficients of full length U-tubes were estimated. It is clarified that the total pressure loss of the shortest instrumented U-tube is equivalent to that of the middle-length non-instrumented U-tube and also that a middle-length instrumented U-tube is equivalent to the longest non-instrumented U-tube. Concludingly. it is important to take account of the CPT pressure loss mentioned above in estimation of fluid behavior at the non-instrumented U-tubes either by using the LSTF experiment data from the CPT-installed U-tubes or by using any analytical codes. (author)

In vitro effects of aqueous extract from Maytenus senegalensis (Lam.) Exell stem bark on egg hatching, larval migration and adult worms of Haemonchus contortus.

Science.gov (United States)

Zangueu, Calvin Bogning; Olounlade, Abiodoun Pascal; Ossokomack, Marlyse; Djouatsa, Yolande Noelle Nangue; Alowanou, Goue Géorcelin; Azebaze, Anatole Guy Blaise; Llorent-Martínez, Eulogio José; de Córdova, Maria Luisa Fernández; Dongmo, Alain Bertrand; Hounzangbe-Adote, Mawulé Sylvie

2018-05-02

Maytenus senegalensis is a common shrub which is scattered in tropical Africa. Different parts of this plant have been reported to be useful in traditional medicine against gastrointestinal disorders and intestinal worms. This study evaluated the anthelmintic activity of the aqueous stem bark extract of M. senegalensis using egg hatch assay (EHA), larval migration inhibition assay (LMIA) and adult worms' motility inhibition assay (AMIA). On EHA, the extract concentrations tested resulted in a significant (p  50%). These in vitro results suggest the presence of some anthelmintic properties in M. senegalensis extract, which is traditionally used by small farmers in west and central Africa. These effects may be due to the flavonoids and proanthocyanidins present in the extract and need to be studied under in vivo conditions.

Isolated Fallopian Tube Torsion in Adolescents

Directory of Open Access Journals (Sweden)

S. Rajaram

2013-01-01

Full Text Available Background. Fallopian tube torsion is a rare cause of acute abdomen, occurring commonly in females of reproductive age. It lacks pathognomonic symptoms, signs, or imaging features, thus causing delay in surgical intervention. Case. We report two cases of isolated fallopian tube torsion in adolescent girls. In the first case a 19-year-old patient presented with acute pain in the left iliac region associated with episodes of vomiting for one day and mild tenderness on examination. Laparoscopy revealed left sided twisted fallopian tube associated with hemorrhagic cyst of ovary. The tube was untwisted and salvaged. In another case an 18-year-old virgin girl presented with similar complaints since one week, associated with mild tenderness in the lower abdomen and tender cystic mass on per rectal examination. On laparoscopy right twisted fallopian tube associated with a paratubal cyst was found. Salpingectomy was done as the tube was gangrenous. Conclusion. Fallopian tube torsion, though rare, should be considered in women of reproductive age with unilateral pelvic pain. Early diagnostic laparoscopy is important for an accurate diagnosis and could salvage the tube.

Sleeving repair of heat exchanger tubes

International Nuclear Information System (INIS)

Street, Michael D.; Schafer, Bruce W.

2000-01-01

Defective heat exchanger tubes can be repaired using techniques that do not involve the cost and schedule penalties of component replacement. FTI's years of experience repairing steam generator tubes have been successfully applied to heat exchangers. Framatome Technologies heat exchanger sleeves can bridge defective areas of the heat exchanger tubes, sleeves have been designed to repair typical heat exchanger tube defects caused by excessive tube vibration, stress corrosion cracking, pitting or erosion. By installing a sleeve, the majority of the tube's heat transfer and flow capacity is maintained and the need to replace the heat exchanger can be delayed or eliminated. Both performance and reliability are improved. FTI typically installs heat exchanger tube sleeves using either a roll expansion or hydraulic expansion process. While roll expansion of a sleeve can be accomplished very quickly, hydraulic expansion allows sleeves to be installed deep within a tube where a roll expander cannot reach. Benefits of FTI's heat exchanger tube sleeving techniques include: - Sleeves can be positioned any where along the tube length, and for precise positioning of the sleeve eddy current techniques can be employed. - Varying sleeve lengths can be used. - Both the roll and hydraulic expansion processes are rapid and both produce joints that do not require stress relief. - Because of low leak rates and speed of installations, sleeves can be used to preventatively repair likely-to-fail tubes. - Sleeves can be used for tube stiffening and to limit leakage through tube defects. - Because of installation speed, there is minimal impact on outage schedules and budgets. FTI's recently installed heat exchanger sleeving at the Kori-3 Nuclear Power Station in conjunction with Korea Plant Service and Engineering Co., Ltd. The sleeves were installed in the 3A and 3B component cooling water heat exchangers. A total of 859 tubesheet and 68 freespan sleeves were installed in the 3A heat

Small size neutron tube UNG-1

International Nuclear Information System (INIS)

Bespalov, D.F.; Mints, A.Z.; Shkol'nikov, A.S.

A tube UNG-1 (universal neutron gas-filled) is designed for the use in the well neutron generators IGN-1 and IGN-1-M (a pulse neutron generator). Their serial production in the USSR has been started in 1963. At the same year, the serial production of the tubes UNG-1 has been started. Thus, this tube is the first serial logging accelerating tube in the USSR. A Penning source, equipped with a hot cathode, was selected as an ion source of the tube

Thru-tubing inflatable workover systems

International Nuclear Information System (INIS)

Coronado, M.P.; Mody, R.K.; Craig, G.C.

1991-01-01

Recent technological advances in inflatable packing element design has allowed non-conventional workover techniques to be accomplished through the production tubing. The improved capabilities of these elements, coupled with new tool designs allowing workovers to be completed with coiled tubing or electric wireline, has seen growing applications. These workovers include, selective and zonal chemical treatments, temporary and permanent plugback operations, intermediate zone blankoff, production and injection flow profile modifications and formation fracturing. They are completed without pulling the production tubing from the well, and thus do not require a rig on the well. Since these tools are snubbed in the well with coiled tubing or electric wireline, thus eliminating the need to kill the well, heavy weight kill fluids, which may cause formation damage, are not required. These tools have been designed to operate with hydraulic pressure and workstring tension within the coiled tubing limitations. This paper outlines the development of these Thru-tubing systems and application techniques that have been developed as a result of their field use. It discusses case histories of applications using this technology and the resulting increase in well performance. This paper also describes auxiliary equipment that has been developed to allow these tool systems to be used safely on coiled tubing and electric wireline

Tubing vs. buckets: a cost comparison

Science.gov (United States)

Neil K. Huyler

1975-01-01

Equipment investment for tubing-vacuum systems was significantly less than that for bucket systems. Tubing-vacuum systems required about 22 percent less labor input, the major labor input being completed before sap-flow periods. Annual cost of operation was less for tubing-vacuum than the bucket system. Small tubing-vacuum operations showed more profit potential than...

The Yoruba farm market as a communication channel in guinea worm disease surveillance.

Science.gov (United States)

Brieger, W R; Kendall, C

1996-01-01

Disease eradication programmes are by definition time bound and require strategies that facilitate timely intervention. Surveillance, which undergirds eradication, also requires timely strategies. Finding such strategies is especially challenging when the target disease is endemic in remote areas, e.g. guinea worm disease, the focus of this study. A strategy of market based surveillance was pilot tested in Ifeloju Local Government Area (LGA) of Oyo State, Nigeria. The project goal was to design a surveillance system that both fit into the natural communication network of rural people, and also enlisted their active involvement. Ethnographic research methods were employed to learn about market location, structure, catchment area and attendance pattern. Four larger farm markets (serving 164 hamlets with 17,000 population) were chosen. Each hamlet was visited and a volunteer 'reporter' was recruited. Reporters were trained on case recognition and detection, first aid and prevention, with a sensitivity to distinguishing indigenous and clinical perceptions of guinea worm. The market cycle was based on the traditional four-day week. Field workers visited every second market 16 times between October 1990 and February 1991. The reporter was expected to identify correctly the first case of the season and thus label the village as endemic for the season. Reporters gave oral reports, and positive indications were followed up within 48 hr by field workers, who verified the case and administered first aid. All hamlets were visited once a month to verify negative reports. Reporter attendance was monitored. Those who had a formal role in the market, e.g. sales agents, had better attendance than ordinary farmers who came only to sell their own produce. Knowledge of market structure and attender roles offers a guide for adapting this surveillance approach to other cultural systems and health issues.

Pathway of oxfendazole from the host into the worm: Trichuris suis in pigs

Directory of Open Access Journals (Sweden)

Tina V.A. Hansen

2017-12-01

Full Text Available It is well known that the efficacy of a single oral dose of benzimidazoles against Trichuris spp. infections in humans and animals is poor, but is currently still used in control programmes against human trichuriasis. However, the route of the benzimidazoles from the treated host to Trichuris remains unknown. As parts of adult Trichuris are situated intracellularly in the caecum, they might be exposed to anthelmintic drugs in the intestinal content as well as the mucosa. In this study, the pathway of oxfendazole and its metabolites was explored using a T. suis-pig infection model, by simultaneously measuring drug concentrations within the worms and the caecal mucosa, caecal tissue, caecal content and plasma of pigs over time after a single oral dose of 5 mg/kg oxfendazole. Additionally, for comparison to the in vivo study, drug uptake and metabolism of oxfendazole by T. suis was examined after in vitro incubation. Oxfendazole and metabolites were quantified by High Performance Liquid Chromatography.Multivariate linear regression analysis showed a strong and highly significant association between OFZ concentrations within T. suis and in plasma, along with a weaker association between OFZ concentrations in caecal tissue/mucosa and T. suis, suggesting that oxfendazole reaches T. suis after absorption from the gastrointestinal tract and enters the worms by the blood-enterocyte pathway. The fenbendazole sulfone level in T. suis was highly affected by the concentrations in plasma. In addition, correlations between drug concentrations in the host compartments, were generally highest for this metabolite. In comparison to oxfendazole, the correlation between plasma and content was particularly high for this metabolite, suggesting a high level of drug movement between these compartments and the possible involvement of the enterohepatic circulation. Keywords: Trichuris, Benzimidazole, Drug efficacy, Drug pathway

Small-bore chest tubes seem to perform better than larger tubes in treatment of spontaneous pneumothorax

DEFF Research Database (Denmark)

Iepsen, Ulrik Winning; Ringbæk, Thomas

2013-01-01

The aim of this study was to compare the efficacy and complications of surgical (large-bore) chest tube drainage with smaller and less invasive chest tubes in the treatment of non-traumatic pneumothorax (PT). ......The aim of this study was to compare the efficacy and complications of surgical (large-bore) chest tube drainage with smaller and less invasive chest tubes in the treatment of non-traumatic pneumothorax (PT). ...

Feeding tube insertion - gastrostomy

Science.gov (United States)

... this page: //medlineplus.gov/ency/article/002937.htm Feeding tube insertion - gastrostomy To use the sharing features on this page, please enable JavaScript. A gastrostomy feeding tube insertion is the placement of a feeding ...

Precision heat forming of tetrafluoroethylene tubing

Science.gov (United States)

Ruiz, W. V.; Thatcher, C. S. (Inventor)

1981-01-01

An invention that provides a method of altering the size of tetrafluoroethylene tubing which is only available in limited combination of wall thicknesses and diameter are discussed. The method includes the steps of sliding the tetrafluoroethylene tubing onto an aluminum mandrel and clamping the ends of the tubing to the mandrel by means of clamps. The tetrafluorethylene tubing and mandrel are then placed in a supporting coil which with the mandrel and tetrafluorethylene tubing are then positioned in a insulated steel pipe which is normally covered with a fiber glass insulator to smooth out temperature distribution therein. The entire structure is then placed in an event which heats the tetrafluorethylene tubing which is then shrunk by the heat to the outer dimension of the aluminum mandrel. After cooling the aluminum mandrel is removed from the newly sized tetrafluorethylene tubing by a conventional chemical milling process.

Improving the calandria tubes for CANDU reactors

International Nuclear Information System (INIS)

Coleman, C.E.; Fong, R.W.L.; Doubt, G.L.

1997-01-01

CANDU calandria tubes are made from annealed Zircaloy-2 sheet formed into a cylinder and welded along its length to make the tube. The current calandria tubes have given exemplary service for many years. With more stringent regulations and the need to accommodate warm cooling water in tropical countries, we started a development program to increase the margins for failure during postulated accidents. These improvements involve increasing the tube strength and optimising the heat-transfer from an excessively hot fuel channel to the cool moderator. If the postulated accident involves a pressure tube break, it would be desirable if the calandria tube withstood the full pressure of the heat-transport system. The weakest link in current calandria tubes is the weld. Thickening the weld can increase the strength by 20% while seamless tubes can be 45% stronger than current tubes. The latter tubes can hold full system pressure for many hours without failure. If during the postulated accident the fuel and pressure tube become excessively hot but do not touch the calandria tube, the radiant heat loss must be maximised. Current calandria tubes have an absorptivity (emissivity) of about 0.2. To protect the fuel and the fuel channel we have devised a finish to the inside surface of the calandria tube that increases the emissivity to 0.7. If during the postulated accident the hot pressure tube touches the cool calandria tube, the contact conductance and the critical heat flux must be optimised to ensure nucleate boiling of the moderator at the outside surface of the calandria tube and therefore efficient exploitation of the moderator as a heat sink. In laboratory tests small ridges on the inside surface and roughening of the outside surface have been shown to increase the margins against failure and increase the possible moderator temperatures thus providing the opportunity to decrease the cost of the moderator heat-exchange system and remove restrictions on reactor operation in

Avoiding leakage flow-induced vibration by a tube-in-tube slip joint

International Nuclear Information System (INIS)

Mulcahy, T.M.

1985-01-01

Parameters and operating conditions (a stability map) were determined for which a specific slip-joint design did not cause self-excited lateral vibration of the two cantilevered, telescoping tubes forming the joint. The joint design featured a localized annular constriction. Flowrate, modal damping, tube engagement length, and eccentric positioning were among the parameters tested. Interestingly, all self-excited vibrations could be avoided by following a simple design rule: place constrictions only at the downstream end of the annular region between the tubes. Also, overall modal damping decreased with increased flowrate, at least initially, for upstream constrictions while the damping increased for downstream constrictions

Pyrotechnic Tubing Connector

Science.gov (United States)

Graves, Thomas J.; Yang, Robert A.

1988-01-01

Tool forms mechanical seal at joint without levers or hydraulic apparatus. Proposed tool intended for use in outer space used on Earth by heavily garbed workers to join tubing in difficult environments. Called Pyrotool, used with Lokring (or equivalent) fittings. Piston slides in cylinder when pushed by gas from detonating pyrotechnic charge. Impulse of piston compresses fittings, sealing around butting ends of tubes.

SG tube identification

International Nuclear Information System (INIS)

Hoogstraten, P. van

1994-01-01

A ''Tracker'' system is described which is designed to identify any tube in a reactor steam generator quickly and safely. Occupational radiation doses to maintenance workers are reduced by using a Tracker and emergency down times are shortened. The system employs a television camera and light source in a stainless steel box with a large window. Both the camera and spotlight can be panned and tilted to reach any point on the tubesheet and are remotely controlled. An operator at a safe working distance can identify any tube visible on a real time video by comparison with the tubesheet pattern stored earlier in the computer memory. The identified tube can then be spotlighted and dealt with quickly by a maintenance worker inside the channel head. (UK)

Numerical simulation of tubes-in-tube heat exchanger in a mixed refrigerant Joule-Thomson cryocooler

Science.gov (United States)

Damle, R. M.; Ardhapurkar, P. M.; Atrey, M. D.

2017-02-01

Mixed refrigerant Joule-Thomson (MRJT) cryocoolers can produce cryogenic temperatures with high efficiency and low operating pressures. As compared to the high system pressures of around 150-200 bar with nitrogen, the operational pressures with non-azeotropic mixtures (e.g., nitrogen-hydrocarbons) come down to 10-25 bar. With mixtures, the heat transfer in the recuperative heat exchanger takes place in the two-phase region. The simultaneous boiling and condensation of the cold and hot gas streams lead to higher heat transfer coefficients as compared to single phase heat exchange. The two-phase heat transfer in the recuperative heat exchanger drastically affects the performance of a MRJT cryocooler. In this work, a previously reported numerical model for a simple tube-in-tube heat exchanger is extended to a multi tubes-in-tube heat exchanger with a transient formulation. Additionally, the J-T expansion process is also considered to simulate the cooling process of the heat exchanger from ambient temperature conditions. A tubes-in-tube heat exchanger offers more heat transfer area per unit volume resulting in a compact design. Also, the division of flow in multiple tubes reduces the pressure drop in the heat exchanger. Simulations with different mixtures of nitrogen-hydrocarbons are carried out and the numerical results are compared with the experimental data.

“Koko et les lunettes magiques”: An educational entertainment tool to prevent parasitic worms and diarrheal diseases in Côte d’Ivoire

Science.gov (United States)

Kouamé, Abel; Dongo, Kouassi; Yapi, Richard B.; Moro, Honorine M.; Kouakou, Christiane A.; Palmeirim, Marta S.; Bonfoh, Bassirou; N’Goran, Eliézer K.; Utzinger, Jürg

2017-01-01

Background Integrated control programs, emphasizing preventive chemotherapy along with health education, can reduce the incidence of soil-transmitted helminthiasis and schistosomiasis. The aim of this study was to develop an educational animated cartoon to improve school children’s awareness regarding soil-transmitted helminthiasis, diarrheal diseases, and related hygiene practices in Côte d’Ivoire. The key messages included in the cartoon were identified through prior formative research to specifically address local knowledge gaps. Methodology In a first step, preliminary research was conducted to assess the knowledge, attitudes, practices, and beliefs of school-aged children regarding parasitic worm infections and hygiene, to identify key health messages to be included in an animated cartoon. Second, an animated cartoon was produced, which included the drafting of the script and story board, and the production of the cartoon’s initial version. Finally, the animated cartoon was pilot tested in eight selected schools and further fine-tuned. Principal findings According to the questionnaire results, children believed that the consumption of sweet food, eating without washing their hands, sitting on the floor, and eating spoiled food were the main causes of parasitic worm infections. Abdominal pain, diarrhea, lack of appetite, failure to grow, and general fatigue were mentioned as symptoms of parasitic worm infections. Most of the children knew that they should go to the hospital for treatment if they experienced symptoms of parasitic worm diseases. The animated cartoon titled “Koko et les lunettes magiques” was produced by Afrika Toon, in collaboration with a scientific team composed of epidemiologists, civil engineers, and social scientists, and the local school children and teachers. Pilot testing of the animated cartoon revealed that, in the short term, children grasped and kept key messages. Most of the children who were shown the cartoon reported to

Improper tube fixation causing a leaky cuff

Directory of Open Access Journals (Sweden)

Gupta Babita

2010-01-01

Full Text Available Leaking endotracheal tube cuffs are common problems in intensive care units. We report a case wherein the inflation tube was damaged by the adhesive plaster used for tube fixation and resulted in leaking endotracheal tube cuff. We also give some suggestions regarding the tube fixation and some remedial measures for damaged inflation system.

The impact of a diet with fructan-rich chicory roots on Oesophagostomum dentatum worm population dynamics and host immune responses in pigs

DEFF Research Database (Denmark)

Thamsborg, Stig Millan; Mejer, Helena; Skovgaard, Kerstin

Oesophagostomum infections in pigs persist for months. We hypothesized that feeding fructans (dried chicory roots) may improve immunity and facilitate worm expulsion. We therefore examined the effects of long-term chicory on O. dentatum population dynamics and host immune responses. Methods: Seve...

The Mashups of YouTube

DEFF Research Database (Denmark)

Simonsen, Thomas Mosebo

2013-01-01

This article focuses on YouTube mashups and how we can understand them as a specific subgenre on YouTube. The Mashups are analysed as audiovisual recontextualizations that are given new meaning, e.g., via collaborative social communities or for individual promotional purposes. This is elaborated......, but rather in its social and communicative abilities within the YouTube community. This leads to the article’s overall argument that the main characteristic of the YouTube Mashup can be explained in terms of connectivity. It is argued that Mashups reveal a double articulation of connectivity; one...... that involves the social mechanisms of the Mashups, and another mode, which concerns the explicit embedding of structural connectivity that accentuates the medium-specific infrastructure of YouTube. This double articulation of connectivity is furthermore elaborated on by including Grusin and Bolter’s concept...

100-ps framing-camera tube

International Nuclear Information System (INIS)

Kalibjian, R.

1978-01-01

The optoelectronic framing-camera tube described is capable of recording two-dimensional image frames with high spatial resolution in the <100-ps range. Framing is performed by streaking a two-dimensional electron image across narrow slits. The resulting dissected electron line images from the slits are restored into framed images by a restorer deflector operating synchronously with the dissector deflector. The number of framed images on the tube's viewing screen equals the number of dissecting slits in the tube. Performance has been demonstrated in a prototype tube by recording 135-ps-duration framed images of 2.5-mm patterns at the cathode. The limitation in the framing speed is in the external drivers for the deflectors and not in the tube design characteristics. Faster frame speeds in the <100-ps range can be obtained by use of faster deflection drivers

Když se řekne YouTube

OpenAIRE

Voců, Ondřej

2011-01-01

This article describes basic characteristics of YouTube portal, explains its importance and provided services. The first part of this article is applied to basic characteristics of YouTube portal, the second part deals with processes related to videos on YouTube. YouTube users, YouTube partners and projects are mainspring of the third part of this article. Special subchapter outlines possibilites of YouTube in relation to information studies and librarianship. At the end of the fourth chapter...

Water-storage-tube systems. Final report

Energy Technology Data Exchange (ETDEWEB)

Hemker, P.

1981-12-24

Passive solar collection/storage/distribution systems were surveyed, designed, fabricated, and mechanically and thermally tested. The types studied were clear and opaque fiberglass tubes, metal tubes with plastic liners, and thermosyphoning tubes. (MHR)

Preparation of metallic uranium tubes; Elaboration des tubes d'uranium metallique

Energy Technology Data Exchange (ETDEWEB)

Lerouge, G; Decours, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

The production furnace is an induction heated vacuum furnace having a capacity at the moment of 250 kg. Previously the crucible was heated by the inductor, the mould being outside the inductor. The tubes thus produced contained cavities, the alloy structure was fine; this was cold-mould casting, At the moment the top of the moulds are pre-heated, this is the so called hot-mould casting. This method has the advantage of eliminating the cavities but leads to a less fine microstructure. The alloy used for the 18 x 40 mm and 23 x 43 mm tubes is U-Mo (1.1 per cent). Since the moulds are now heated at the top, the solidification of the metal is very slow in this zone leading to a pronounced {gamma} grain, whereas towards the base the faster cooling leads to a smaller {gamma} grain. The {gamma} structure depends essentially on the solidification rate and on the time spent in this zone. In order to obtain a fine and homogeneous grain along the whole length of the tube, a controlled cooling treatment is effected. It consists in heating the uranium tubes in the {gamma} place and then in cooling them at a rate of between 20 and 50 deg C/mm down to 400 deg C. The 77 x 95 mm and 54 x 70 mm annular elements are at the moment being produced for research purposes. Their preparation is similar to that of 18 x 40 mm and 23 x 43 mm elements. The 77 x 95 mm tubes are at the moment made from U-Cr alloy (0.1 per cent); because of their size, their preparation is carried out in 600 mm diameter furnaces. (authors) [French] Le four d'elaboration est un four sous vide chaufffe par induction, dont la capacite actuelle est de 250 kg. Anterieurement le creuset seul etait chauffe par l'inducteur, les moules etaient hors de l'inducteur. Les tubes obtenus presentaient des cavites, la structure de l'alliage etait fine, c'etait la coulee en moules froids. Actuellement on prechauffe le haut des moules, c'est la coulee dite en moules chauds. Cette facon de faire a l'avantage de supprimer les cavites

Gastroenteric tube feeding: Techniques, problems and solutions

Science.gov (United States)

Blumenstein, Irina; Shastri, Yogesh M; Stein, Jürgen

2014-01-01

Gastroenteric tube feeding plays a major role in the management of patients with poor voluntary intake, chronic neurological or mechanical dysphagia or gut dysfunction, and patients who are critically ill. However, despite the benefits and widespread use of enteral tube feeding, some patients experience complications. This review aims to discuss and compare current knowledge regarding the clinical application of enteral tube feeding, together with associated complications and special aspects. We conducted an extensive literature search on PubMed, Embase and Medline using index terms relating to enteral access, enteral feeding/nutrition, tube feeding, percutaneous endoscopic gastrostomy/jejunostomy, endoscopic nasoenteric tube, nasogastric tube, and refeeding syndrome. The literature showed common routes of enteral access to include nasoenteral tube, gastrostomy and jejunostomy, while complications fall into four major categories: mechanical, e.g., tube blockage or removal; gastrointestinal, e.g., diarrhea; infectious e.g., aspiration pneumonia, tube site infection; and metabolic, e.g., refeeding syndrome, hyperglycemia. Although the type and frequency of complications arising from tube feeding vary considerably according to the chosen access route, gastrointestinal complications are without doubt the most common. Complications associated with enteral tube feeding can be reduced by careful observance of guidelines, including those related to food composition, administration rate, portion size, food temperature and patient supervision. PMID:25024606

An advanced tube wear and fatigue workstation to predict flow induced vibrations of steam generator tubes

International Nuclear Information System (INIS)

Gay, N.; Baratte, C.; Flesch, B.

1997-01-01

Flow induced tube vibration damage is a major concern for designers and operators of nuclear power plant steam generators (SG). The operating flow-induced vibrational behaviour has to be estimated accurately to allow a precise evaluation of the new safety margins in order to optimize the maintenance policy. For this purpose, an industrial 'Tube Wear and Fatigue Workstation', called 'GEVIBUS Workstation' and based on an advanced methodology for predictive analysis of flow-induced vibration of tube bundles subject to cross-flow has been developed at Electricite de France. The GEVIBUS Workstation is an interactive processor linking modules as: thermalhydraulic computation, parametric finite element builder, interface between finite element model, thermalhydraulic code and vibratory response computations, refining modelling of fluid-elastic and random forces, linear and non-linear dynamic response and the coupled fluid-structure system, evaluation of tube damage due to fatigue and wear, graphical outputs. Two practical applications are also presented in the paper; the first simulation refers to an experimental set-up consisting of a straight tube bundle subject to water cross-flow, while the second one deals with an industrial configuration which has been observed in some operating steam generators i.e., top tube support plate degradation. In the first case the GEVIBUS predictions in terms of tube displacement time histories and phase planes have been found in very good agreement with experiment. In the second application the GEVIBUS computation showed that a tube with localized degradation is much more stable than a tube located in an extended degradation zone. Important conclusions are also drawn concerning maintenance. (author)

Tubing crimping pliers

Science.gov (United States)

Lindholm, G.T.

1981-02-27

The disclosure relates to pliers and more particularly to pliers for crimping two or more pieces of copper tubing together prior to their being permanently joined by brazing, soldering or the like. A die containing spring-loaded pins rotates within a cammed ring in the head of the pliers. As the die rotates, the pins force a crimp on tubing held within the pliers.

Study of the stability of a SEIRS model for computer worm propagation

Science.gov (United States)

Hernández Guillén, J. D.; Martín del Rey, A.; Hernández Encinas, L.

2017-08-01

Nowadays, malware is the most important threat to information security. In this sense, several mathematical models to simulate malware spreading have appeared. They are compartmental models where the population of devices is classified into different compartments: susceptible, exposed, infectious, recovered, etc. The main goal of this work is to propose an improved SEIRS (Susceptible-Exposed-Infectious-Recovered-Susceptible) mathematical model to simulate computer worm propagation. It is a continuous model whose dynamic is ruled by means of a system of ordinary differential equations. It considers more realistic parameters related to the propagation; in fact, a modified incidence rate has been used. Moreover, the equilibrium points are computed and their local and global stability analyses are studied. From the explicit expression of the basic reproductive number, efficient control measures are also obtained.

A Worm Algorithm for the Lattice CP(N-1) Model arXiv

CERN Document Server

Rindlisbacher, Tobias

The CP(N-1) model in 2D is an interesting toy model for 4D QCD as it possesses confinement, asymptotic freedom and a non-trivial vacuum structure. Due to the lower dimensionality and the absence of fermions, the computational cost for simulating 2D CP(N-1) on the lattice is much lower than the one for simulating 4D QCD. However to our knowledge, no efficient algorithm for simulating the lattice CP(N-1) model has been tested so far, which also works at finite density. To this end we propose and test a new type of worm algorithm which is appropriate to simulate the lattice CP(N-1) model in a dual, flux-variables based representation, in which the introduction of a chemical potential does not give rise to any complications.

Tube Length and Water Flow

Directory of Open Access Journals (Sweden)

Ben Ruktantichoke

2011-06-01

Full Text Available In this study water flowed through a straight horizontal plastic tube placed at the bottom of a large tank of water. The effect of changing the length of tubing on the velocity of flow was investigated. It was found that the Hagen-Poiseuille Equation is valid when the effect of water entering the tube is accounted for.

The other prey-capture silk: Fibres made by glow-worms (Diptera: Keroplatidae) comprise cross-β-sheet crystallites in an abundant amorphous fraction.

Science.gov (United States)

Walker, Andrew A; Weisman, Sarah; Trueman, Holly E; Merritt, David J; Sutherland, Tara D

2015-09-01

Glow-worms (larvae of dipteran genus Arachnocampa) are restricted to moist habitats where they capture flying prey using snares composed of highly extensible silk fibres and sticky mucus droplets. Little is known about the composition or structure of glow-worm snares, or the extent of possible convergence between glow-worm and arachnid capture silks. We characterised Arachnocampa richardsae silk and mucus using X-ray scattering, Fourier transform infrared spectroscopy and amino acid analysis. Silk but not mucus contained crystallites of the cross-β-sheet type, which occur in unrelated insect silks but have not been reported previously in fibres used for prey capture. Mucus proteins were rich in Gly (28.5%) and existed in predominantly a random coil structure, typical of many adhesive proteins. In contrast, the silk fibres were unusually rich in charged and polar residues, particularly Lys (18.1%), which we propose is related to their use in a highly hydrated state. Comparison of X-ray scattering, infrared spectroscopy and amino acid analysis data suggests that silk fibres contain a high fraction of disordered protein. We suggest that in the native hydrated state, silk fibres are capable of extension via deformation of both disordered regions and cross-β-sheet crystallites, and that high extensibility is an adaptation promoting successful prey capture. This study illustrates the rich variety of protein motifs that are available for recruitment into biopolymers, and how convergently evolved materials can nevertheless be based on fundamentally different protein structures. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Boiling heat transfer on horizontal tube bundles

International Nuclear Information System (INIS)

Anon.

1987-01-01

Nucleate boiling heat transfer characteristics for a tube in a bundle differ from that for a single tube in a pool and this difference is known as 'tube bundle effect.' There exist two bundle effects, positive and negative. The positive bundle effect enhances heat transfer due to convective flow induced by rising bubbles generated from the lower tubes, while the negative bundle effect deteriorates heat transfer due to vapor blanketing caused by accumulation of bubbles. Staggered tube bundles tested and found that the upper tubes in bundles have higher heat transfer coefficients than the lower tubes. The effects of various parameters such as pressure, tube geometry and oil contamination on heat transfer have been examined. Some workers attempted to clarify the mechanism of occurrence of 'bundle effect' by testing tube arrangements of small scale. All reported only enhancement in heat transfer but results showed the symptom of heat transfer deterioration at higher heat fluxes. As mentioned above, it has not been clarified so far even whether the 'tube bundle effect' should serve as enhancement or deterioration of heat transfer in nucleate boiling. In this study, experiments are performed in detail by using bundles of small scale, and effects of heat flux distribution, pressure and tube location are clarified. Furthermore, some consideration on the mechanisms of occurrence of 'tube bundle effect' is made and a method for prediction of heat transfer rate is proposed

N Reactor pressure tube 1350 postirradiation examination

International Nuclear Information System (INIS)

Cook, D.J.

1977-01-01

The N Reactor pressure tubes were fabricated from Zircaloy-2 primarily due to the excellent corrosion resistance, low neutron absorption, and high strength properties of this alloy. Irradiation damage mechanisms increase the strength and decrease the ductility of the Zircaloy-2. Irradiation data available at the time the tubes were installed indicated that fast neutron irradiation damage mechanisms would not decrease the ductility to unacceptable levels over the estimated plant life of 25 to 30 years. However, because the tubes are a primary coolant system component and only limited data are available on irradiation effects at high fluences, a Postirradiation Examination (PIE) program was developed to assure that service factors do not compromise pressure tube integrity essential to reactor safety. The PIE program requires that a pressure tube be periodically removed from the reactor for destructive testing. The N Reactor Technical Specifications specify that the frequency of pressure tube removal and examination be based upon the previous PIE test results. Four pressure tubes were examined before tube 1350, and the test results were summarized in individual reports. PIE results on tube 1350 were summarized along with the test results on the previous four tubes in a previous report. The purpose of this report is to present in detail the results on PIE of pressure tube 1350, and, in particular, document the technique by which the fracture toughness of the pressure tube was determined

Acute phase proteins in dogs naturally infected with the Giant Kidney Worm (Dioctophyme renale)

DEFF Research Database (Denmark)

Schmidt, Elizabeth M. S.; Kjelgaard-Hansen, Mads; Thomas, Funmilola

2016-01-01

of nephrectomy on circulating concentrations of select acute phase proteins (APP) such as serum amyloid A (SAA), C-reactive protein (CRP), and haptoglobin(HP). Methods: Nephrectomy was performed in infected dogs and the worms were collected for identification. Blood samples were taken 24 hours before surgery...... the 12 dogs evaluated in this study. Dogs showed significantly increased HP concentrations(P SAA concentrations before surgery, and cortisol concentrations were significantly higher at admission when compared to recovery. No significant correlations were found between the number...

Contrastive Analysis and Research on Negative Pressure Beam Tube System and Positive Pressure Beam Tube System for Mine Use

Science.gov (United States)

Wang, Xinyi; Shen, Jialong; Liu, Xinbo

2018-01-01

Against the technical defects of universally applicable beam tube monitoring system at present, such as air suction in the beam tube, line clogging, long sampling time, etc., the paper analyzes the current situation of the spontaneous combustion fire disaster forecast of mine in our country and these defects one by one. On this basis, the paper proposes a research thought that improving the positive pressure beam tube so as to substitute the negative pressure beam tube. Then, the paper introduces the beam tube monitoring system based on positive pressure technology through theoretical analysis and experiment. In the comparison with negative pressure beam tube, the paper concludes the advantage of the new system and draws the conclusion that the positive pressure beam tube is superior to the negative pressure beam tube system both in test result and test time. At last, the paper proposes prospect of the beam tube monitoring system based on positive pressure technology.

Leakproof Swaged Joints in Thin-Wall Tubing

Science.gov (United States)

Stuckenberg, F. H.; Crockett, L. K.; Snyder, W. E.

1986-01-01

Tubular inserts reinforce joints, reducing incidence of leaks. In new swaging technique, tubular inserts placed inside ends of both tubes to be joined. Made from thicker-wall tubing with outside diameter that matches inside diameter of thin tubing swaged, inserts support tube ends at joint. They ensure more uniform contact between swage fitting and tubing. New swaging technique developed for Al/Ti/V-alloy hydraulic supply lines.

Nasogastric tube versus gastrostomy tube for gastric decompression in abdominal surgery: a prospective, randomized trial comparing patients' tube-related inconvenience.

Science.gov (United States)

Hoffmann, S; Koller, M; Plaul, U; Stinner, B; Gerdes, B; Lorenz, W; Rothmund, M

2001-11-01

Perioperative decompression of the stomach is still a common procedure and can be achieved using either nasogastric tubes (NTs) or gastrostomy tubes (GTs). While both procedures appear to be equally effective, some authors believe that NTs are less convenient for patients than GTs. However, to date, no reliable prospective data are available on this issue. We conducted a prospective, randomized trial comparing NTs versus GTs with a total of 110 patients undergoing elective colon surgery. The primary outcome measure was the patient's tube-related inconvenience and pain, assessed in a standardized interview on day 2 after surgery and quantified by means of a visual-analog scale (VAS). A questionnaire including the EORTC QLQ-C30 and additional items regarding retrospective tube-related judgements was administered on the day of discharge and 4 weeks after discharge. Secondary endpoints were the therapy-related morbidity and general complications. When patients were asked which of their drainage tubes (all patients had three or four drainage tubes, such as decompression drains, urinary drains, central venous line) was most inconvenient, 43% (CI 33-53%) in the NT group reported that the NT was most inconvenient, while only 4% (CI 1-10%) of the GT patients judged the GT most inconvenient ( Ptube system (day 2 p.o.: 71%, CI 61-80%; 4 weeks p.o.: 66%, CI 56-75%) than did GT patients (day 2 p.o.: 94%, CI 88-98%; 4 weeks p.o.: 91% CI 84-96%); again, these differences were statistically significant ( Ptube system have to weigh up the possibilities of different averse clinical as well as subjective outcomes. It is then preferable to include patients' preferences in the individual decision making process (shared-decision making).

Numerical investigation of heat transfer in annulus laminar flow of multi tubes-in-tube helical coil

Science.gov (United States)

Nada, S. A.; Elattar, H. F.; Fouda, A.; Refaey, H. A.

2018-03-01

In the present study, a CFD analysis using ANSYS-FLUENT 14.5 CFD package is used to investigate the characteristics of heat transfer of laminar flow in annulus formed by multi tubes in tube helically coiled heat exchanger. The numerical results are validated by comparison with previous experimental data and fair agreements were existed. The influences of the design and operation parameters such as heat flux, Reynolds numbers and annulus geometry on the heat transfer characteristics are investigated. Different annulus of different numbers of inner tubes, specifically 1, 2, 3, 4 and 5 tubes, are tested. The Results showed that for all the studied annulus, the heat flux has no effect on the Nusselt number and compactness parameter. The annulus formed by using five inner tubes showed the best heat transfer performance and compactness parameter. Correlation of predicting Nusselt number in terms of Reynolds number and number of inner tubes are presented.

YouTube and ‘psychiatry’

Science.gov (United States)

Gordon, Robert; Miller, John; Collins, Noel

2015-01-01

YouTube is a video-sharing website that is increasingly used to share and disseminate health-related information, particularly among younger people. There are reports that social media sites, such as YouTube, are being used to communicate an anti-psychiatry message but this has never been confirmed in any published analysis of YouTube clip content. This descriptive study revealed that the representation of ‘psychiatry’ during summer 2012 was predominantly negative. A subsequent smaller re-analysis suggests that the negative portrayal of ‘psychiatry’ on YouTube is a stable phenomenon. The significance of this and how it could be addressed are discussed. PMID:26755987

Grooved tube plug rolls in

International Nuclear Information System (INIS)

Krausser, P.

1991-01-01

The removable plugs used to date by the Power Generation Group (KWU) of Siemens to seal defective steam generator tubes have a good track record. Their sealing principle is based on the elastic tensioning of three seal disks against the inside wall of the tube. Now a further removable plug is available -a roll-in plug with a metal-coated surface. It is particularly suitable for use in the roller-expanded zone of the tubes at the tube sheet. The plugs can be used in both Siemens-KWU steam generators and in steam generators manufactured in compliance with the guidelines of the ASME Code. (author)

Vibration characteristics of tubes in a heat exchanger

International Nuclear Information System (INIS)

Simonis; Steininger, D.

1985-01-01

Circumferential tube cracking has occurred in the once-through steam generators used in nuclear power plants. Analyses of failed tubes indicate that a fatigue process induced by tube vibration could cause the leaks. To investigate the vibration amplitude of tube spans during reactor operation, twenty-three tube spans were instrumented with accelerometers and strain gages at Three Mile Island Unit 2. To aid in the interpretation of the operational vibration measurements, tests were performed, in air, to determine the predominant resonant frequencies and mode shapes of selected tubes. By adapting modal analysis techniques, the two predominant response frequencies were determined for 100 randomly selected tube spans and the 23 instrumented tube spans; plus, the predominant mode shape was determined for five tube spans bounded by the tube sheet and the fifteenth support plate and one tube span bounded by the ninth and tenth support plate. The average value for the first and second predominant response frequency was 65 Hz and 170 Hz, respectively. The predominant frequencies for the individual tube spans are distributed randomly with no spatial orientation. The first predominant mode shape for the six tube spans tested corresponded to a classical beam with elastic supports. The equivalent stiffness of the elastic supports depend upon the tube span tested

Method of repairing pressure tube type reactors

International Nuclear Information System (INIS)

Asada, Takashi.

1983-01-01

Purpose: To enable to re-start the reactor operation in a short time, upon occurrence of failures in a pressure tube, as well as directly examine the cause for the failures in the pressure tube. Method: The pressure tube reactor main body comprises a calandria tank of a briquette form, pressure tubes, fuel assemblies and an iron-water shielding body. If failure is resulted to a pressure tube, the reactor operation is at first shutdown and nuclear fuel assemblies are extracted to withdraw from the pressure tube. Then, to an inlet pipe way and an outlet pipeway connected to the failed pressure tube, are attached plugs by means of welding or the like at the appropriate position where the radiation exposure dose is lower and the repairing work can be performed with ease. The pressure tube is disconnected to withdraw from the inlet pipeway and the outlet pipeway and, instead, radiation shielding plug tube is inserted and shield cooling device is actuated if required, wherein the reactor is actuated to re-start the operation. (Yoshino, Y.)

Practical acoustic thermometry with twin-tube and single-tube sensors

Energy Technology Data Exchange (ETDEWEB)

De Podesta, M.; Sutton, G.; Edwards, G.; Stanger, L.; Preece, H. [National Physical Laboratory, Teddington, (United Kingdom)

2015-07-01

Accurate measurement of high temperatures in a nuclear environment presents unique challenges. All secondary techniques inevitably drift because the thermometric materials in thermocouples and resistance sensors are sensitive not just to temperature, but also their own chemical and physical composition. The solution is to use primary methods that rely on fundamental links between measurable physical properties and temperature. In the nuclear field the best known technique is the measurement of Johnson Noise in a resistor (See Paper 80 at this conference). In this paper we describe the measurement of temperature in terms of the speed of sound in a gas confined in a tube - an acoustic waveguide. Acoustic thermometry is the most accurate technique of primary thermometry ever devised with the best uncertainty of measurement below 0.001 C. In contrast, the acoustic technique described in this work has a much larger uncertainty, approximately 1 deg. C. But the cost and ease of use are improved by several orders of magnitude, making implementation eminently practical. We first describe the basic construction and method of operation of thermometers using twin-tubes and single tubes. We then present results using a twin-tube design showing that showing long term stability (i.e. no detectable drift) at 700 deg. C over periods of several weeks. We then outline how the technique may be developed for different nuclear applications. (authors)

Wear Characterization of Carbon Nanotubes Reinforced Acetal Spur, Helical, Bevel and Worm Gears Using a TS Universal Test Rig

Science.gov (United States)

Yousef, Samy; Osman, T. A.; Abdalla, Abdelrahman H.; Zohdy, Gamal A.

2015-12-01

Although the applications of nanotechnologies are increasing, there remains a significant barrier between nanotechnology and machine element applications. This work aims to remove this barrier by blending carbon nanotubes (CNT) with common types of acetal polymer gears (spur, helical, bevel and worm). This was done by using adhesive oil (paraffin) during injection molding to synthesize a flange and short bars containing 0.02% CNT by weight. The flanges and short bars were machined using hobbing and milling machines to produce nanocomposite polymer gears. Some defects that surfaced in previous work, such as the appearance of bubbles and unmelted pellets during the injection process, were avoided to produce an excellent dispersion of CNT in the acetal. The wear resistances of the gears were measured by using a TS universal test rig using constant parameters for all of the gears that were fabricated. The tests were run at a speed of 1420 rpm and a torque of 4 Nm. The results showed that the wear resistances of the CNT/acetal gears were increased due to the addition of CNT, especially the helical, bevel and worm gears.

Delay Induced Hopf Bifurcation of an Epidemic Model with Graded Infection Rates for Internet Worms

Directory of Open Access Journals (Sweden)

Tao Zhao

2017-01-01

Full Text Available A delayed SEIQRS worm propagation model with different infection rates for the exposed computers and the infectious computers is investigated in this paper. The results are given in terms of the local stability and Hopf bifurcation. Sufficient conditions for the local stability and the existence of Hopf bifurcation are obtained by using eigenvalue method and choosing the delay as the bifurcation parameter. In particular, the direction and the stability of the Hopf bifurcation are investigated by means of the normal form theory and center manifold theorem. Finally, a numerical example is also presented to support the obtained theoretical results.

Ultra-fast framing camera tube

Science.gov (United States)

Kalibjian, Ralph

1981-01-01

An electronic framing camera tube features focal plane image dissection and synchronized restoration of the dissected electron line images to form two-dimensional framed images. Ultra-fast framing is performed by first streaking a two-dimensional electron image across a narrow slit, thereby dissecting the two-dimensional electron image into sequential electron line images. The dissected electron line images are then restored into a framed image by a restorer deflector operated synchronously with the dissector deflector. The number of framed images on the tube's viewing screen is equal to the number of dissecting slits in the tube. The distinguishing features of this ultra-fast framing camera tube are the focal plane dissecting slits, and the synchronously-operated restorer deflector which restores the dissected electron line images into a two-dimensional framed image. The framing camera tube can produce image frames having high spatial resolution of optical events in the sub-100 picosecond range.

High temperature ceramic-tubed reformer

Science.gov (United States)

Williams, Joseph J.; Rosenberg, Robert A.; McDonough, Lane J.

1990-03-01

The overall objective of the HiPHES project is to develop an advanced high-pressure heat exchanger for a convective steam/methane reformer. The HiPHES steam/methane reformer is a convective, shell and tube type, catalytic reactor. The use of ceramic tubes will allow reaction temperature higher than the current state-of-the-art outlet temperatures of about 1600 F using metal tubes. Higher reaction temperatures increase feedstock conversion to synthesis gas and reduce energy requirements compared to currently available radiant-box type reformers using metal tubes. Reforming of natural gas is the principal method used to produce synthesis gas (primarily hydrogen and carbon monoxide, H2 and CO) which is used to produce hydrogen (for refinery upgrading), methanol, as well as several other important materials. The HiPHES reformer development is an extension of Stone and Webster's efforts to develop a metal-tubed convective reformer integrated with a gas turbine cycle.

Physics of magnetic flux tubes

CERN Document Server

Ryutova, Margarita

2015-01-01

This book is the first account of the physics of magnetic flux tubes from their fundamental properties to collective phenomena in an ensembles of flux tubes. The physics of magnetic flux tubes is absolutely vital for understanding fundamental physical processes in the solar atmosphere shaped and governed by magnetic fields. High-resolution and high cadence observations from recent space and  ground-based instruments taken simultaneously at different heights and temperatures not only show the ubiquity of filamentary structure formation but also allow to study how various events are interconnected by system of magnetic flux tubes. The book covers both theory and observations. Theoretical models presented in analytical and phenomenological forms are tailored for practical applications. These are welded with state-of-the-art observations from early decisive ones to the most recent data that open a new phase-space for exploring the Sun and sun-like stars. Concept of magnetic flux tubes is central to various magn...