WorldWideScience

Sample records for venga survey design

  1. Dissecting the assembly and star formation history of disks and bulges in nearby spirals using the VENGA IFU survey

    Science.gov (United States)

    Carrillo, Andreia Jessica; Jogee, Shardha; Kaplan, Kyle; Weinzirl, Tim; Blanc, Guillermo A.

    2017-06-01

    Integral field spectroscopy of nearby galaxies provides a powerful and unparalleled tool for studying how galaxies assemble the different components -- the bulge, bar, and disk-- that define the Hubble sequence. We explore the assembly and star formation history of these components using galaxies in the VIRUS-P Exploration of Nearby Galaxies (VENGA) survey of 30 nearby spiral galaxies. Compared to other integral field spectroscopy studies of spirals, our study benefits from high spatial sampling and resolution (typically a few 100 pc), large coverage from the bulge to the outer disk, broad wavelength range (3600-6800 A), and medium spectral resolution (120 km/s at 5000 A). In this poster, we present the methodology and data illustrating the exquisite, high-quality, spatially-resolved spectra out to large radii, and the distribution, kinematics, and metallicity of stars and ionized gas. We discuss the next steps in deriving the star formation history (SFH) of bulge, bar, and disk components, and elucidating their assembly pathway by comparing their SFH and structural properties to theoretical models of galaxy evolution. This project is supported by the NSF grants AST-1614798 and AST-1413652.

  2. Designing an Effective Survey

    National Research Council Canada - National Science Library

    Kasunic, Mark

    2005-01-01

    ... of them. However, to protect the validity of conclusions drawn from a survey, certain procedures must be followed throughout the process of designing, developing, and distributing the survey questionnaire...

  3. Issues in environmental survey design

    International Nuclear Information System (INIS)

    Iachan, R.

    1989-01-01

    Several environmental survey design issues are discussed and illustrated with surveys designed by Research Triangle Institute statisticians. Issues related to sampling and nonsampling errors are illustrated for indoor air quality surveys, radon surveys, pesticide surveys, and occupational and personal exposure surveys. Sample design issues include the use of auxiliary information (e.g. for stratification), and sampling in time. We also discuss the reduction and estimation of nonsampling errors, including nonresponse and measurement bias

  4. Watershed-based survey designs

    Science.gov (United States)

    Detenbeck, N.E.; Cincotta, D.; Denver, J.M.; Greenlee, S.K.; Olsen, A.R.; Pitchford, A.M.

    2005-01-01

    Watershed-based sampling design and assessment tools help serve the multiple goals for water quality monitoring required under the Clean Water Act, including assessment of regional conditions to meet Section 305(b), identification of impaired water bodies or watersheds to meet Section 303(d), and development of empirical relationships between causes or sources of impairment and biological responses. Creation of GIS databases for hydrography, hydrologically corrected digital elevation models, and hydrologic derivatives such as watershed boundaries and upstream–downstream topology of subcatchments would provide a consistent seamless nationwide framework for these designs. The elements of a watershed-based sample framework can be represented either as a continuous infinite set defined by points along a linear stream network, or as a discrete set of watershed polygons. Watershed-based designs can be developed with existing probabilistic survey methods, including the use of unequal probability weighting, stratification, and two-stage frames for sampling. Case studies for monitoring of Atlantic Coastal Plain streams, West Virginia wadeable streams, and coastal Oregon streams illustrate three different approaches for selecting sites for watershed-based survey designs.

  5. New tools for evaluating LQAS survey designs

    OpenAIRE

    Hund, Lauren

    2014-01-01

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

  6. Designing Surveys for Language Programs.

    Science.gov (United States)

    Brown, James Dean

    A discussion of survey methodology for investigating second language programs and instruction examines two methods: oral interviews and written questionnaires. Each method is defined, and variations are explored. For interviews, this includes individual, group, and telephone interviews. For questionnaires, this includes self-administered and…

  7. Multiagency radiation survey and site investigation manual (MARSSIM): Survey design

    International Nuclear Information System (INIS)

    Abelquist, E.W.; Berger, J.D.

    1996-01-01

    This paper describes the MultiAgency Radiation Survey and Site Investigation Manual (MARSSIM) strategy for designing a final status survey. The purpose of the final status survey is to demonstrate that release criteria established by the regulatory agency have been met. Survey design begins with identification of the contaminants and determination of whether the radionuclides of concern exist in background. The decommissioned site is segregated into Class 1, Class 2, and Class 3 areas, based on contamination potential, and each area is further divided into survey units. Appropriate reference areas for indoor and outdoor background measurements are selected. Survey instrumentation and techniques are selected in order to assure that the instrumentation is capable of detecting the contamination at the derived concentration guideline level (DCGL). Survey reference systems are established and the number of survey data points is determined-with the required number of data points distributed on a triangular grid Pattern. Two suitistical tests are used to evaluate data from final status surveys. For contaminants that are b, present in background, the Wilcoxon Rank Sum test is used; for contaminants that are not present in background, the Wilcoxon Signed Rank (or Sign) test is used. The number of data points needed to satisfy these nonparametric tests is based on the contaminant DCGL value, the expected Standard deviation of the contaminant in background and in the survey unit, and the acceptable probability of making Type I and Type II decision errors. The MARSSIM also requires a reasonable level of assurance that any small areas of elevated residual radioactivity that could be significant relative to regulatory limits are not missed during the final status survey. Measurements and sampling on a specified grid size are used to obtain an adequate assurance level that small locations of elevated radioactivity will Still satisfy DCGLs-applicable to small areas

  8. New tools for evaluating LQAS survey designs.

    Science.gov (United States)

    Hund, Lauren

    2014-02-15

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

  9. Design of a statewide radiation survey

    International Nuclear Information System (INIS)

    Nagda, N.L.; Koontz, M.D.; Rector, H.E.; Nifong, G.D.

    1989-01-01

    The Florida Institute of Phosphate Research (FIPR) recently sponsored a statewide survey to identify all significant land areas in Florida where the state's environmental radiation rule should be applied. Under this rule, newly constructed buildings must be tested for radiation levels unless approved construction techniques are used. Two parallel surveys - a land-based survey and a population-based survey - were designed and conducted to address the objective. Each survey included measurements in more than 3000 residences throughout the state. Other information sources that existed at the outset of the study, such as geologic profiles mapped by previous investigators and terrestrial uranium levels characterized through aerial gamma radiation surveys, were also examined. Initial data analysis efforts focused on determining the extent of evidence of radon potential for each of 67 counties in the state. Within 18 countries that were determined to have definite evidence of elevated radon potential, more detailed spatial analyses were conducted to identify areas of which the rule should apply. A total of 74 quadrangles delineated by the U.S. Geological Survey, representing about 7% of those constituting the state, were identified as having elevated radon potential and being subject to the rule

  10. Robustness of Adaptive Survey Designs to Inaccuracy of Design Parameters

    Directory of Open Access Journals (Sweden)

    Burger Joep

    2017-09-01

    Full Text Available Adaptive survey designs (ASDs optimize design features, given 1 the interactions between the design features and characteristics of sampling units and 2 a set of constraints, such as a budget and a minimum number of respondents. Estimation of the interactions is subject to both random and systematic error. In this article, we propose and evaluate four viewpoints to assess robustness of ASDs to inaccuracy of design parameter estimates: the effect of both imprecision and bias on both ASD structure and ASD performance. We additionally propose three distance measures to compare the structure of ASDs. The methodology is illustrated using a simple simulation study and a more complex but realistic case study on the Dutch Travel Survey. The proposed methodology can be applied to other ASD optimization problems. In our simulation study and case study, the ASD was fairly robust to imprecision, but not to realistic dynamics in the design parameters. To deal with the sensitivity of ASDs to changing design parameters, we recommend to learn and update the design parameters.

  11. A new design of neutron survey instrument

    International Nuclear Information System (INIS)

    Tanner, R.J.; Eakins, J.S.; Hager, L.G.

    2010-01-01

    A novel design of neutron survey instrument has been developed. The moderator has been modified via the use of 'neutron guides', which help thermal neutrons reach the central proportional counter. This innovation has allowed the variations in the energy dependence of ambient dose equivalent response to be reduced compared to prior single-detector designs, whilst maintaining a relatively light moderator and simple construction. In particular, the design has a relatively small over-response to neutrons with energies around 5 keV, when compared to prior designs. The final optimized design has been verified using MCNP5 calculations to ensure that the response is relatively independent of the energy and direction of the incident neutron. This has required the ends of the guides to be structured so that unidirectional and isotropic neutron fields have closely matched responses, as is necessary in the workplace. The reading of the instrument in workplace fields is calculated via folding and the suitability of the design for use in the workplace discussed.

  12. Design for Restoration: beyond the survey

    Directory of Open Access Journals (Sweden)

    Giovanni Carbonara

    2015-01-01

    Full Text Available  This new issue, that we can define special, marks an important change for DISEGNARECON (its transfer from the University of Bologna to the University of L’Aquila facing the topic of the Design for the Restoration in a way that is special too. Treated in fact - beside the outgoing editor in chief, Roberto Mingucci - by Mario Centofanti, who now assumes the responsibility for the magazine, and Giovanni Carbonara, which is definitely authoritative reference in the field. Sharing a strong interest for communicating the Restoration Project, they intended to indicate the substantial union of methods and objectives between the disciplines of architectural survey and of restoration, which makes the meaning of an aggregation now also institutionally formalized and particularly significant for the project on the existing architecture. 

  13. Southeast Region Headboat Survey-PPS Survey Design Project

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset is a record of trips selected during pilot procedures for the PPS design project designed to track the port agents ability to follow the PPS design and...

  14. Designing web surveys for the multi-device internet

    NARCIS (Netherlands)

    de Bruijne, M.A.

    2015-01-01

    The rise of the mobile internet has rapidly changed the landscape for fielding web surveys. The devices that respondents use to take a web survey vary greatly in size and user interface. This diversity in the interaction between survey and respondent makes it challenging to design a web survey for

  15. Design and Validation of the Quantum Mechanics Conceptual Survey

    Science.gov (United States)

    McKagan, S. B.; Perkins, K. K.; Wieman, C. E.

    2010-01-01

    The Quantum Mechanics Conceptual Survey (QMCS) is a 12-question survey of students' conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included…

  16. Tackling the Survey: A Learning-by-Induction Design

    Science.gov (United States)

    Witte, Anne E.

    2017-01-01

    Free online survey tools provide a practical learning-by-induction platform for business communication instructors interested in trying out an advanced multidisciplinary survey activity coupled with an innovative teaching design. More than just building skills in marketing, survey projects marshal a wider set of thinking and doing activities that…

  17. Sample design considerations of indoor air exposure surveys

    International Nuclear Information System (INIS)

    Cox, B.G.; Mage, D.T.; Immerman, F.W.

    1988-01-01

    Concern about the potential for indoor air pollution has prompted recent surveys of radon and NO 2 concentrations in homes and personal exposure studies of volatile organics, carbon monoxide and pesticides, to name a few. The statistical problems in designing sample surveys that measure the physical environment are diverse and more complicated than those encountered in traditional surveys of human attitudes and attributes. This paper addresses issues encountered when designing indoor air quality (IAQ) studies. General statistical concepts related to target population definition, frame creation, and sample selection for area household surveys and telephone surveys are presented. The implications of different measurement approaches are discussed, and response rate considerations are described

  18. A comprehensive survey of brain interface technology designs.

    Science.gov (United States)

    Mason, S G; Bashashati, A; Fatourechi, M; Navarro, K F; Birch, G E

    2007-02-01

    In this work we present the first comprehensive survey of Brain Interface (BI) technology designs published prior to January 2006. Detailed results from this survey, which was based on the Brain Interface Design Framework proposed by Mason and Birch, are presented and discussed to address the following research questions: (1) which BI technologies are directly comparable, (2) what technology designs exist, (3) which application areas (users, activities and environments) have been targeted in these designs, (4) which design approaches have received little or no research and are possible opportunities for new technology, and (5) how well are designs reported. The results of this work demonstrate that meta-analysis of high-level BI design attributes is possible and informative. The survey also produced a valuable, historical cross-reference where BI technology designers can identify what types of technology have been proposed and by whom.

  19. Design-Build Partnership Attributes Survey Analysis

    National Research Council Canada - National Science Library

    Pyle, Raymond

    1998-01-01

    Two basic hypotheses were investigated: 1. Finding these attributes for success for a design-build partnership may be accomplished by transferring concepts and ideas from business research on partnership formation. 2...

  20. The Dark Energy Survey instrument design

    International Nuclear Information System (INIS)

    Flaugher, B.; Fermilab

    2006-01-01

    We describe a new project, the Dark Energy Survey (DES), aimed at measuring the dark energy equation of state parameter, w, to a statistical precision of ∼5%, with four complementary techniques. The survey will use a new 3 sq. deg. mosaic camera (DECam) mounted at the prime focus of the Blanco 4m telescope at the Cerro-Tololo International Observatory (CTIO). DECam includes a large mosaic camera, a five element optical corrector, four filters (g,r,i,z), and the associated infrastructure for operation in the prime focus cage. The focal plane consists of 62 2K x 4K CCD modules (0.27''/pixel) arranged in a hexagon inscribed within the 2.2 deg. diameter field of view. We plan to use the 250 micron thick fully-depleted CCDs that have been developed at the Lawrence Berkeley National Laboratory (LBNL). At Fermilab, we will establish a packaging factory to produce four-side buttable modules for the LBNL devices, as well as to test and grade the CCDs. R and D is underway and delivery of DECam to CTIO is scheduled for 2009

  1. Ubiquitous Surveys Reveal Shallow Research Designs (Commentary).

    Science.gov (United States)

    McDaniel, Charles-Gene

    1990-01-01

    Criticizes the large amount of often irrelevant, poorly designed, and poorly written quantitative journalism research. Notes that journalism education and mass communication education research published in scholarly journals is largely ignored by professional journalists, who find more value in the qualitative research reported in the journalism…

  2. Methodological design of the National Health and Nutrition Survey 2016

    OpenAIRE

    Martín Romero-Martínez; Teresa Shamah-Levy; Lucia Cuevas-Nasu; Ignacio Méndez Gómez-Humarán; Elsa Berenice Gaona-Pineda; Luz María Gómez-Acosta; Juan Ángel Rivera-Dommarco; Mauricio Hernández-Ávila

    2017-01-01

    Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organizat...

  3. Sample design for the residential energy consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    The purpose of this report is to provide detailed information about the multistage area-probability sample design used for the Residential Energy Consumption Survey (RECS). It is intended as a technical report, for use by statisticians, to better understand the theory and procedures followed in the creation of the RECS sample frame. For a more cursory overview of the RECS sample design, refer to the appendix entitled ``How the Survey was Conducted,`` which is included in the statistical reports produced for each RECS survey year.

  4. Optical Design for a Survey X-Ray Telescope

    Science.gov (United States)

    Saha, Timo T.; Zhang, William W.; McClelland, Ryan S.

    2014-01-01

    Optical design trades are underway at the Goddard Space Flight Center to define a telescope for an x-ray survey mission. Top-level science objectives of the mission include the study of x-ray transients, surveying and long-term monitoring of compact objects in nearby galaxies, as well as both deep and wide-field x-ray surveys. In this paper we consider Wolter, Wolter-Schwarzschild, and modified Wolter-Schwarzschild telescope designs as basic building blocks for the tightly nested survey telescope. Design principles and dominating aberrations of individual telescopes and nested telescopes are discussed and we compare the off-axis optical performance at 1.0 KeV and 4.0 KeV across a 1.0-degree full field-of-view.

  5. Optimising cluster survey design for planning schistosomiasis preventive chemotherapy.

    Directory of Open Access Journals (Sweden)

    Sarah C L Knowles

    2017-05-01

    Full Text Available The cornerstone of current schistosomiasis control programmes is delivery of praziquantel to at-risk populations. Such preventive chemotherapy requires accurate information on the geographic distribution of infection, yet the performance of alternative survey designs for estimating prevalence and converting this into treatment decisions has not been thoroughly evaluated.We used baseline schistosomiasis mapping surveys from three countries (Malawi, Côte d'Ivoire and Liberia to generate spatially realistic gold standard datasets, against which we tested alternative two-stage cluster survey designs. We assessed how sampling different numbers of schools per district (2-20 and children per school (10-50 influences the accuracy of prevalence estimates and treatment class assignment, and we compared survey cost-efficiency using data from Malawi. Due to the focal nature of schistosomiasis, up to 53% simulated surveys involving 2-5 schools per district failed to detect schistosomiasis in low endemicity areas (1-10% prevalence. Increasing the number of schools surveyed per district improved treatment class assignment far more than increasing the number of children sampled per school. For Malawi, surveys of 15 schools per district and 20-30 children per school reliably detected endemic schistosomiasis and maximised cost-efficiency. In sensitivity analyses where treatment costs and the country considered were varied, optimal survey size was remarkably consistent, with cost-efficiency maximised at 15-20 schools per district.Among two-stage cluster surveys for schistosomiasis, our simulations indicated that surveying 15-20 schools per district and 20-30 children per school optimised cost-efficiency and minimised the risk of under-treatment, with surveys involving more schools of greater cost-efficiency as treatment costs rose.

  6. Designing and conducting survey research a comprehensive guide

    CERN Document Server

    Rea, Louis M

    2014-01-01

    The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

  7. Technology, design and dementia: an exploratory survey of developers.

    Science.gov (United States)

    Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

    2017-08-01

    Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

  8. Quality Control in Survey Design: Evaluating a Survey of Educators’ Attitudes Concerning Differentiated Compensation

    OpenAIRE

    Kelly D. Bradley; Michael Peabody; Shannon O. Sampson

    2015-01-01

    This study utilized the Rasch model to assess the quality of a survey instrument designed to measure attitudes of administrators and teachers concerning a differentiated teacher compensation program piloted in Kentucky.  Researchers addressing potentially contentious issues should ensure their methods stand up to rigorous criticism.  The results indicate that the rating scale does not function as expected, with items being too easy to endorse.  Future iterations of this survey should be revis...

  9. Farm survey design in the Sahel : Experiences from Burkina Faso

    NARCIS (Netherlands)

    Graaff, de J.; Mijl, van der J.P.; Nibbering, J.W.

    1999-01-01

    In designing farm household surveys in the Sahel in West Africa much attention should be paid to various specific features of the farming systems. These features relate in particular to the social organisation of the farming communities. Within households, kinship relations have a strong bearing on

  10. Survey, design, development, and installation of micro hydel power generation

    International Nuclear Information System (INIS)

    Ijaz, M.

    2011-01-01

    This paper presents the survey, design, development and installation Of micro hydel power generation using low head Kaplan water turbine. Electricity production from hydro power has been and still is today, the first renewable source used to generate electricity. The development of energy from renewable is very important step in reduction of carbon emissions(CO/sub 2/).

  11. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Ly{alpha} NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    Energy Technology Data Exchange (ETDEWEB)

    Prescott, Moire K. M. [Department of Physics, Broida Hall, Mail Code 9530, University of California, Santa Barbara, CA 93106 (United States); Dey, Arjun; Jannuzi, Buell T., E-mail: mkpresco@physics.ucsb.edu [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States)

    2012-04-01

    Giant Ly{alpha} nebulae (or Ly{alpha} 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Ly{alpha} nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Ly{alpha} nebulae at 2 {approx}< z {approx}< 3 within deep broadband imaging and have carried out a survey of the 9.4 deg{sup 2} NOAO Deep Wide-Field Survey Booetes field. With a total survey comoving volume of Almost-Equal-To 10{sup 8} h{sup -3}{sub 70} Mpc{sup 3}, this is the largest volume survey for Ly{alpha} nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Ly{alpha} nebula.

  12. Metamodels for Computer-Based Engineering Design: Survey and Recommendations

    Science.gov (United States)

    Simpson, Timothy W.; Peplinski, Jesse; Koch, Patrick N.; Allen, Janet K.

    1997-01-01

    The use of statistical techniques to build approximations of expensive computer analysis codes pervades much of todays engineering design. These statistical approximations, or metamodels, are used to replace the actual expensive computer analyses, facilitating multidisciplinary, multiobjective optimization and concept exploration. In this paper we review several of these techniques including design of experiments, response surface methodology, Taguchi methods, neural networks, inductive learning, and kriging. We survey their existing application in engineering design and then address the dangers of applying traditional statistical techniques to approximate deterministic computer analysis codes. We conclude with recommendations for the appropriate use of statistical approximation techniques in given situations and how common pitfalls can be avoided.

  13. [Methodological design of the National Health and Nutrition Survey 2016].

    Science.gov (United States)

    Romero-Martínez, Martín; Shamah-Levy, Teresa; Cuevas-Nasu, Lucía; Gómez-Humarán, Ignacio Méndez; Gaona-Pineda, Elsa Berenice; Gómez-Acosta, Luz María; Rivera-Dommarco, Juan Ángel; Hernández-Ávila, Mauricio

    2017-01-01

    Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC) 2016. The Ensanut-MC is a national probabilistic survey whose objective population are the inhabitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on overweight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  14. Guide to the design and application of online questionnaire surveys.

    Science.gov (United States)

    Regmi, Pramod R; Waithaka, Elizabeth; Paudyal, Anjana; Simkhada, Padam; van Teijlingen, Edwin

    2016-12-01

    Collecting research data through traditional approaches (face-to-face, postal or telephone survey) can be costly and time consuming. The emerging data collection approach based on internet/e-based technologies (e.g. online platforms and email), is a relatively cost effective survey alternative. These novel data collection strategies can collect large amounts of data from participants in a short time frame. Similarly, they also seem to be feasible and effective in collecting data on sensitive issues or with samples they are generally hard to reach, for example, men who have sex with men (MSM) or migrants. As a significant proportion of the population currently in the world are digitally connected, the shift from postal (paper-pencil) or telephone towards online survey use in research is in the interests of researchers in academia as well as in the commercial world. However, compared to designing and executing paper version of the questionnaire, there is limited literature to help a starting researcher with the design and a use of online questionnaires. This short paper highlights issues around: a) methodological aspect of online questionnaire survey; b) online survey planning and management; and c) ethical concerns that may arise while using this option. We believe that this paper will be useful for researchers who want to gain knowledge or apply this approach in their research.

  15. Large Synoptic Survey Telescope: From Science Drivers to Reference Design

    Energy Technology Data Exchange (ETDEWEB)

    Ivezic, Z.; Axelrod, T.; Brandt, W.N.; Burke, D.L.; Claver, C.F.; Connolly, A.; Cook, K.H.; Gee, P.; Gilmore, D.K.; Jacoby, S.H.; Jones, R.L.; Kahn, S.M.; Kantor, J.P.; Krabbendam, V.; Lupton, R.H.; Monet, D.G.; Pinto, P.A.; Saha, A.; Schalk, T.L.; Schneider, D.P.; Strauss, Michael A.; /Washington U., Seattle, Astron. Dept. /LSST Corp. /Penn State U., Astron. Astrophys. /KIPAC, Menlo Park /NOAO, Tucson /LLNL, Livermore /UC, Davis /Princeton U., Astrophys. Sci. Dept. /Naval Observ., Flagstaff /Arizona U., Astron. Dept. - Steward Observ. /UC, Santa Cruz /Harvard U. /Johns Hopkins U. /Illinois U., Urbana

    2011-10-14

    In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST). LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective) primary mirror, a 9.6 deg{sup 2} field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg{sup 2} with {delta} < +34.5{sup o}, and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the

  16. Large Synoptic Survey Telescope: From science drivers to reference design

    Directory of Open Access Journals (Sweden)

    Ivezić Ž.

    2008-01-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next- generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pachon in Northern Chile. The current baseline design, with an 8.4 m (6.5 m effective primary mirror, a 9.6 deg2 field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg2 with δ < +34.5◦ , and will be imaged multiple times in six bands, ugrizy, covering the wavelength range 320-1050 nm. About 90% of the observing time will be devoted to a deep- wide-fast survey mode which will observe a 20,000 deg2 region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We describe how the LSST

  17. Large Synoptic Survey Telescope: From Science Drivers To Reference Design

    Directory of Open Access Journals (Sweden)

    Ivezić, Ž.

    2008-06-01

    Full Text Available In the history of astronomy, major advances in our understanding of the Universe have come from dramatic improvements in our ability to accurately measure astronomical quantities. Aided by rapid progress in information technology, current sky surveys are changing the way we view and study the Universe. Next-generation surveys will maintain this revolutionary progress. We focus here on the most ambitious survey currently planned in the visible band, the Large Synoptic Survey Telescope (LSST. LSST will have unique survey capability in the faint time domain. The LSST design is driven by four main science themes: constraining dark energy and dark matter, taking an inventory of the Solar System, exploring the transient optical sky, and mapping the Milky Way. It will be a large, wide-field ground-based system designed to obtain multiple images covering the sky that is visible from Cerro Pach'{o}n in Northern Chile. The current baseline design, with an 8.4, m (6.5, m effective primary mirror, a 9.6 deg$^2$ field of view, and a 3,200 Megapixel camera, will allow about 10,000 square degrees of sky to be covered using pairs of 15-second exposures in two photometric bands every three nights on average. The system is designed to yield high image quality, as well as superb astrometric and photometric accuracy. The survey area will include 30,000 deg$^2$ with $delta<+34.5^circ$, and will be imaged multiple times in six bands, $ugrizy$, covering the wavelength range 320--1050 nm. About 90\\% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg$^2$ region about 1000 times in the six bands during the anticipated 10 years of operation. These data will result in databases including 10 billion galaxies and a similar number of stars, and will serve the majority of science programs. The remaining 10\\% of the observing time will be allocated to special programs such as Very Deep and Very Fast time domain surveys. We

  18. A SUCCESSFUL BROADBAND SURVEY FOR GIANT Lyα NEBULAE. I. SURVEY DESIGN AND CANDIDATE SELECTION

    International Nuclear Information System (INIS)

    Prescott, Moire K. M.; Dey, Arjun; Jannuzi, Buell T.

    2012-01-01

    Giant Lyα nebulae (or Lyα 'blobs') are likely sites of ongoing massive galaxy formation, but the rarity of these powerful sources has made it difficult to form a coherent picture of their properties, ionization mechanisms, and space density. Systematic narrowband Lyα nebula surveys are ongoing, but the small redshift range covered and the observational expense limit the comoving volume that can be probed by even the largest of these surveys and pose a significant problem when searching for such rare sources. We have developed a systematic search technique designed to find large Lyα nebulae at 2 ∼ 2 NOAO Deep Wide-Field Survey Boötes field. With a total survey comoving volume of ≈10 8 h –3 70 Mpc 3 , this is the largest volume survey for Lyα nebulae ever undertaken. In this first paper in the series, we present the details of the survey design and a systematically selected sample of 79 candidates, which includes one previously discovered Lyα nebula.

  19. The Army Communications Objectives Measurement System (ACOMS): Survey Design

    Science.gov (United States)

    1988-04-01

    tiveness, assessments of advertising strategy efficiencies, management of the advertising program, and planning and development of new marketing strategies... advertising strategy and market segmentation. The ACOMS development effort has focused on specifying the design and analysis plan for the survey...second set of goals involves the use of ACOMS data to assess the Army’s advertising strategy . ACOMS is examining the extent to which the Army’s in

  20. Survey of research on the optimal design of sea harbours

    Directory of Open Access Journals (Sweden)

    Hassan Diab

    2017-07-01

    Full Text Available The design of harbours, as with any other system design, must be an optimization process. In this study, a global examination of the different constraints in coastal engineering was performed and an optimization problem was defined. The problem has multiple objectives, and the criteria to be minimized are the structure cost and wave height disturbance inside a harbour. As concluded in this survey, the constraints are predefined parameters, mandatory constraints or optional constraints. All of these constraints are categorized into four categories: environmental, fluid mechanical, structural and manoeuvring.

  1. Design and validation of the Quantum Mechanics Conceptual Survey

    Directory of Open Access Journals (Sweden)

    S. B. McKagan

    2010-11-01

    Full Text Available The Quantum Mechanics Conceptual Survey (QMCS is a 12-question survey of students’ conceptual understanding of quantum mechanics. It is intended to be used to measure the relative effectiveness of different instructional methods in modern physics courses. In this paper, we describe the design and validation of the survey, a process that included observations of students, a review of previous literature and textbooks and syllabi, faculty and student interviews, and statistical analysis. We also discuss issues in the development of specific questions, which may be useful both for instructors who wish to use the QMCS in their classes and for researchers who wish to conduct further research of student understanding of quantum mechanics. The QMCS has been most thoroughly tested in, and is most appropriate for assessment of (as a posttest only, sophomore-level modern physics courses. We also describe testing with students in junior quantum courses and graduate quantum courses, from which we conclude that the QMCS may be appropriate for assessing junior quantum courses, but is not appropriate for assessing graduate courses. One surprising result of our faculty interviews is a lack of faculty consensus on what topics should be taught in modern physics, which has made designing a test that is valued by a majority of physics faculty more difficult than expected.

  2. Design Considerations: Falcon M Dwarf Habitable Exoplanet Survey

    Science.gov (United States)

    Polsgrove, Daniel; Novotny, Steven; Della-Rose, Devin J.; Chun, Francis; Tippets, Roger; O'Shea, Patrick; Miller, Matthew

    2016-01-01

    The Falcon Telescope Network (FTN) is an assemblage of twelve automated 20-inch telescopes positioned around the globe, controlled from the Cadet Space Operations Center (CSOC) at the US Air Force Academy (USAFA) in Colorado Springs, Colorado. Five of the 12 sites are currently installed, with full operational capability expected by the end of 2016. Though optimized for studying near-earth objects to accomplish its primary mission of Space Situational Awareness (SSA), the Falcon telescopes are in many ways similar to those used by ongoing and planned exoplanet transit surveys targeting individual M dwarf stars (e.g., MEarth, APACHE, SPECULOOS). The network's worldwide geographic distribution provides additional potential advantages. We have performed analytical and empirical studies exploring the viability of employing the FTN for a future survey of nearby late-type M dwarfs tailored to detect transits of 1-2REarth exoplanets in habitable-zone orbits . We present empirical results on photometric precision derived from data collected with multiple Falcon telescopes on a set of nearby (survey design parameters is also described, including an analysis of site-specific weather data, anticipated telescope time allocation and the percentage of nearby M dwarfs with sufficient check stars within the Falcons' 11' x 11' field-of-view required to perform effective differential photometry. The results of this ongoing effort will inform the likelihood of discovering one (or more) habitable-zone exoplanets given current occurrence rate estimates over a nominal five-year campaign, and will dictate specific survey design features in preparation for initiating project execution when the FTN begins full-scale automated operations.

  3. Methodological design of the National Health and Nutrition Survey 2016

    Directory of Open Access Journals (Sweden)

    Martín Romero-Martínez

    2017-05-01

    Full Text Available Objective. Describe the design methodology of the halfway health and nutrition national survey (Ensanut-MC 2016. Materials and methods. The Ensanut-MC is a national probabilistic survey whose objective population are the in­habitants of private households in Mexico. The sample size was determined to make inferences on the urban and rural areas in four regions. Describes main design elements: target population, topics of study, sampling procedure, measurement procedure and logistics organization. Results. A final sample of 9 479 completed household interviews, and a sample of 16 591 individual interviews. The response rate for households was 77.9%, and the response rate for individuals was 91.9%. Conclusions. The Ensanut-MC probabilistic design allows valid statistical inferences about interest parameters for Mexico´s public health and nutrition, specifically on over­weight, obesity and diabetes mellitus. Updated information also supports the monitoring, updating and formulation of new policies and priority programs.

  4. SEDS: THE SPITZER EXTENDED DEEP SURVEY. SURVEY DESIGN, PHOTOMETRY, AND DEEP IRAC SOURCE COUNTS

    International Nuclear Information System (INIS)

    Ashby, M. L. N.; Willner, S. P.; Fazio, G. G.; Huang, J.-S.; Hernquist, L.; Hora, J. L.; Arendt, R.; Barmby, P.; Barro, G.; Faber, S.; Guhathakurta, P.; Bell, E. F.; Bouwens, R.; Cattaneo, A.; Croton, D.; Davé, R.; Dunlop, J. S.; Egami, E.; Finlator, K.; Grogin, N. A.

    2013-01-01

    The Spitzer Extended Deep Survey (SEDS) is a very deep infrared survey within five well-known extragalactic science fields: the UKIDSS Ultra-Deep Survey, the Extended Chandra Deep Field South, COSMOS, the Hubble Deep Field North, and the Extended Groth Strip. SEDS covers a total area of 1.46 deg 2 to a depth of 26 AB mag (3σ) in both of the warm Infrared Array Camera (IRAC) bands at 3.6 and 4.5 μm. Because of its uniform depth of coverage in so many widely-separated fields, SEDS is subject to roughly 25% smaller errors due to cosmic variance than a single-field survey of the same size. SEDS was designed to detect and characterize galaxies from intermediate to high redshifts (z = 2-7) with a built-in means of assessing the impact of cosmic variance on the individual fields. Because the full SEDS depth was accumulated in at least three separate visits to each field, typically with six-month intervals between visits, SEDS also furnishes an opportunity to assess the infrared variability of faint objects. This paper describes the SEDS survey design, processing, and publicly-available data products. Deep IRAC counts for the more than 300,000 galaxies detected by SEDS are consistent with models based on known galaxy populations. Discrete IRAC sources contribute 5.6 ± 1.0 and 4.4 ± 0.8 nW m –2 sr –1 at 3.6 and 4.5 μm to the diffuse cosmic infrared background (CIB). IRAC sources cannot contribute more than half of the total CIB flux estimated from DIRBE data. Barring an unexpected error in the DIRBE flux estimates, half the CIB flux must therefore come from a diffuse component.

  5. Probability sampling design in ethnobotanical surveys of medicinal plants

    Directory of Open Access Journals (Sweden)

    Mariano Martinez Espinosa

    2012-07-01

    Full Text Available Non-probability sampling design can be used in ethnobotanical surveys of medicinal plants. However, this method does not allow statistical inferences to be made from the data generated. The aim of this paper is to present a probability sampling design that is applicable in ethnobotanical studies of medicinal plants. The sampling design employed in the research titled "Ethnobotanical knowledge of medicinal plants used by traditional communities of Nossa Senhora Aparecida do Chumbo district (NSACD, Poconé, Mato Grosso, Brazil" was used as a case study. Probability sampling methods (simple random and stratified sampling were used in this study. In order to determine the sample size, the following data were considered: population size (N of 1179 families; confidence coefficient, 95%; sample error (d, 0.05; and a proportion (p, 0.5. The application of this sampling method resulted in a sample size (n of at least 290 families in the district. The present study concludes that probability sampling methods necessarily have to be employed in ethnobotanical studies of medicinal plants, particularly where statistical inferences have to be made using data obtained. This can be achieved by applying different existing probability sampling methods, or better still, a combination of such methods.

  6. Telemedicine for Developing Countries. A Survey and Some Design Issues.

    Science.gov (United States)

    Combi, Carlo; Pozzani, Gabriele; Pozzi, Giuseppe

    2016-11-02

    Developing countries need telemedicine applications that help in many situations, when physicians are a small number with respect to the population, when specialized physicians are not available, when patients and physicians in rural villages need assistance in the delivery of health care. Moreover, the requirements of telemedicine applications for developing countries are somewhat more demanding than for developed countries. Indeed, further social, organizational, and technical aspects need to be considered for successful telemedicine applications in developing countries. We consider all the major projects in telemedicine, devoted to developing countries, as described by the proper scientific literature. On the basis of such literature, we want to define a specific taxonomy that allows a proper classification and a fast overview of telemedicine projects in developing countries. Moreover, by considering both the literature and some recent direct experiences, we want to complete such overview by discussing some design issues to be taken into consideration when developing telemedicine software systems. We considered and reviewed the major conferences and journals in depth, and looked for reports on the telemedicine projects. We provide the reader with a survey of the main projects and systems, from which we derived a taxonomy of features of telemedicine systems for developing countries. We also propose and discuss some classification criteria for design issues, based on the lessons learned in this research area. We highlight some challenges and recommendations to be considered when designing a telemedicine system for developing countries.

  7. Iranian mental health survey: design and field proced.

    Directory of Open Access Journals (Sweden)

    Afarin Rahimi-Movaghar

    2014-06-01

    Full Text Available Iranian Mental Health Survey (IranMHS was conducted to assess the twelve-month prevalence and severity of psychiatric disorders in the Iranian adult population and to determine the pattern of health care utilization and cost of services. IranMHS is a cross-sectional national household survey with face-to-face interviews as the main data collection method. The study was carried out between January and June 2011. A three-stage probability sampling was applied for the selection of a representative sample from the non-institutionalized population aged 15 to 64. The primary instrument utilized for assessing the prevalence of mental disorders was the Persian version of Composite International Diagnosis Interview, version 2.1. The instruments for assessing the service and cost of mental illness were developed by the research team. The response rate was 86.2%, and a total of 7886 individuals participated in the study. Sampling weights were the joint product of inverse probability of unit selection, non-response weights and post-stratification weights. This paper presents an overview of the study design, fieldwork organization and procedures, weightings and analysis. The strengths and limitations of the study are also discussed.

  8. The 2003 Australian Breast Health Survey: survey design and preliminary results

    Directory of Open Access Journals (Sweden)

    Favelle Simone

    2008-01-01

    Full Text Available Abstract Background The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. Methods The 2003 BHS surveyed English-speaking Australian women aged 30–69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Results Of the 3,144 respondents who consented to being interviewed, 138 (4.4% had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1% reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9% had heard of the BreastScreen Australia (BSA program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. Conclusion The

  9. The 2003 Australian Breast Health Survey: survey design and preliminary results.

    Science.gov (United States)

    Villanueva, Elmer V; Jones, Sandra; Nehill, Caroline; Favelle, Simone; Steel, David; Iverson, Donald; Zorbas, Helen

    2008-01-14

    The Breast Health Surveys, conducted by the National Breast Cancer Centre (NBCC) in 1996 and 2003, are designed to gain insight into the knowledge, attitudes and behaviours of a nationally representative sample of Australian women on issues relevant to breast cancer. In this article, we focus on major aspects of the design and present results on respondents' knowledge about mammographic screening. The 2003 BHS surveyed English-speaking Australian women aged 30-69 without a history of breast cancer using computer-assisted telephone interviewing. Questions covered the following themes: knowledge and perceptions about incidence, mortality and risk; knowledge and behaviour regarding early detection, symptoms and diagnosis; mammographic screening; treatment; and accessibility and availability of information and services. Respondents were selected using a complex sample design involving stratification. Sample weights against Australian population benchmarks were used in all statistical analyses. Means and proportions for the entire population and by age group and area of residence were calculated. Statistical tests were conducted using a level of significance of 0.01. Of the 3,144 respondents who consented to being interviewed, 138 (4.4%) had a previous diagnosis of breast cancer and were excluded leaving 3,006 completed interviews eligible for analysis. A majority of respondents (61.1%) reported ever having had a mammogram and 29.1% identified mammography as being the best way of finding breast cancer. A majority of women (85.9%) had heard of the BreastScreen Australia (BSA) program, the national mammographic screening program providing free biennial screening mammograms, with 94.5% believing that BSA attendance was available regardless of the presence or absence of symptoms. There have been substantial gains in women's knowledge about mammographic screening over the seven years between the two surveys. The NBCC Breast Health Surveys provide a valuable picture of the

  10. Responsive survey design, demographic data collection, and models of demographic behavior.

    Science.gov (United States)

    Axinn, William G; Link, Cynthia F; Groves, Robert M

    2011-08-01

    To address declining response rates and rising data-collection costs, survey methodologists have devised new techniques for using process data ("paradata") to address nonresponse by altering the survey design dynamically during data collection. We investigate the substantive consequences of responsive survey design-tools that use paradata to improve the representative qualities of surveys and control costs. By improving representation of reluctant respondents, responsive design can change our understanding of the topic being studied. Using the National Survey of Family Growth Cycle 6, we illustrate how responsive survey design can shape both demographic estimates and models of demographic behaviors based on survey data. By juxtaposing measures from regular and responsive data collection phases, we document how special efforts to interview reluctant respondents may affect demographic estimates. Results demonstrate the potential of responsive survey design to change the quality of demographic research based on survey data.

  11. Induced Polarization Surveying for Acid Rock Screening in Highway Design

    Science.gov (United States)

    Butler, K. E.; Al, T.; Bishop, T.

    2004-05-01

    Highway and pipeline construction agencies have become increasingly vigilant in their efforts to avoid cutting through sulphide-bearing bedrock that has potential to produce acid rock drainage. Blasting and fragmentation of such rock increases the surface area available for sulphide oxidation and hence increases the risk of acid rock drainage unless the rock contains enough natural buffering capacity to neutralize the pH. In December, 2001, the New Brunswick Department of Transportation (NBOT) sponsored a field trial of geophysical surveying in order to assess its suitability as a screening tool for locating near-surface sulphides along proposed highway alignments. The goal was to develop a protocol that would allow existing programs of drilling and geochemical testing to be targeted more effectively, and provide design engineers with the information needed to reduce rock cuts where necessary and dispose of blasted material in a responsible fashion. Induced polarization (IP) was chosen as the primary geophysical method given its ability to detect low-grade disseminated mineralization. The survey was conducted in dipole-dipole mode using an exploration-style time domain IP system, dipoles 8 to 25 m in length, and six potential dipoles for each current dipole location (i.e. n = 1 - 6). Supplementary information was provided by resistivity and VLF-EM surveys sensitive to lateral changes in electrical conductivity, and by magnetic field surveying chosen for its sensitivity to the magnetic susceptibility of pyrrhotite. Geological and geochemical analyses of samples taken from several IP anomalies located along 4.3 line-km of proposed highway confirmed the effectiveness of the screening technique. IP pseudosections from a region of metamorphosed shales and volcaniclastic rocks identified discrete, well-defined mineralized zones. Stronger, overlapping, and more laterally extensive IP anomalies were observed over a section of graphitic and sulphide-bearing metasedimentary

  12. Current State of Agile User-Centered Design: A Survey

    Science.gov (United States)

    Hussain, Zahid; Slany, Wolfgang; Holzinger, Andreas

    Agile software development methods are quite popular nowadays and are being adopted at an increasing rate in the industry every year. However, these methods are still lacking usability awareness in their development lifecycle, and the integration of usability/User-Centered Design (UCD) into agile methods is not adequately addressed. This paper presents the preliminary results of a recently conducted online survey regarding the current state of the integration of agile methods and usability/UCD. A world wide response of 92 practitioners was received. The results show that the majority of practitioners perceive that the integration of agile methods with usability/UCD has added value to their adopted processes and to their teams; has resulted in the improvement of usability and quality of the product developed; and has increased the satisfaction of the end-users of the product developed. The top most used HCI techniques are low-fidelity prototyping, conceptual designs, observational studies of users, usability expert evaluations, field studies, personas, rapid iterative testing, and laboratory usability testing.

  13. Design and evaluation of representative indoor radon surveys

    International Nuclear Information System (INIS)

    Csige, I.; Csegzi, S.

    2004-01-01

    We have developed a procedure to design and evaluate representative indoor radon surveys. The procedure is based on random sampling of a population of houses and careful statistical analysis of measured indoor radon concentrations. The method is designed to estimate the fraction of houses in which annual average 222 Rn activity concentration may exceed a certain reference level. Measurements of annual average indoor 222 Rn activity concentration were done in sleeping rooms at pillow level using etched track type radon detectors. We applied the above procedure in an old fashioned village and in a fast developing small city in Transylvania, Romania. In the village almost all houses were single floor wooden made houses without cellar built with traditional technology on a geologically uniform area. The distribution of indoor 222 Rn activity concentration in a sample of 115 houses can almost perfectly be fitted with log-normal probability density function. The correlation coefficient of linear fitting on linearized scales was k = -0.9980. The percentages of houses expected to have annual average 222 Rn activity concentration higher than 400 Bq m -3 is less than 1 %, and of those higher than 600 Bq m -3 can be estimated to be around 0.1 %. The small city, on the other hand lies on a geologically inhomogeneous area, and house construction technology has also changed dramatically in past decades. The resulting distribution of measured indoor 222 Rn activity concentration in a sample of 116 houses cannot be fitted with any simple probability density function. Therefore the prediction of the fraction of houses in which the annual average 222 Rn activity concentration may exceed a certain reference level could not be done adequately. With certain assumptions we estimated that the percentages of houses expected to have annual average 222 Rn activity concentration higher than 400 Bq m -3 is between 3 and 7 %, and of those higher than 600 Bq m -3 can be estimated to be between

  14. Trajectory Design for the Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Dichmann, Donald J.; Parker, Joel; Williams, Trevor; Mendelsohn, Chad

    2014-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a National Aeronautics and Space Administration (NASA) mission launching in 2017. TESS will travel in a highly eccentric orbit around Earth, with initial perigee radius near 17 Earth radii (Re) and apogee radius near 59 Re. The orbit period is near 2:1 resonance with the Moon, with apogee nearly 90 degrees out-of-phase with the Moon, in a configuration that has been shown to be operationally stable. TESS will execute phasing loops followed by a lunar flyby, with a final maneuver to achieve 2:1 resonance with the Moon. The goals of a resonant orbit with long-term stability, short eclipses and limited oscillations of perigee present significant challenges to the trajectory design. To rapidly assess launch opportunities, we adapted the SWM76 launch window tool to assess the TESS mission constraints. To understand the long-term dynamics of such a resonant orbit in the Earth-Moon system we employed Dynamical Systems Theory in the Circular Restricted 3-Body Problem (CR3BP). For precise trajectory analysis we use a high-fidelity model and multiple shooting in the General Mission Analysis Tool (GMAT) to optimize the maneuver delta-V and meet mission constraints. Finally we describe how the techniques we have developed can be applied to missions with similar requirements.

  15. Exploring cosmic origins with CORE: Survey requirements and mission design

    Science.gov (United States)

    Delabrouille, J.; de Bernardis, P.; Bouchet, F. R.; Achúcarro, A.; Ade, P. A. R.; Allison, R.; Arroja, F.; Artal, E.; Ashdown, M.; Baccigalupi, C.; Ballardini, M.; Banday, A. J.; Banerji, R.; Barbosa, D.; Bartlett, J.; Bartolo, N.; Basak, S.; Baselmans, J. J. A.; Basu, K.; Battistelli, E. S.; Battye, R.; Baumann, D.; Benoít, A.; Bersanelli, M.; Bideaud, A.; Biesiada, M.; Bilicki, M.; Bonaldi, A.; Bonato, M.; Borrill, J.; Boulanger, F.; Brinckmann, T.; Brown, M. L.; Bucher, M.; Burigana, C.; Buzzelli, A.; Cabass, G.; Cai, Z.-Y.; Calvo, M.; Caputo, A.; Carvalho, C.-S.; Casas, F. J.; Castellano, G.; Catalano, A.; Challinor, A.; Charles, I.; Chluba, J.; Clements, D. L.; Clesse, S.; Colafrancesco, S.; Colantoni, I.; Contreras, D.; Coppolecchia, A.; Crook, M.; D'Alessandro, G.; D'Amico, G.; da Silva, A.; de Avillez, M.; de Gasperis, G.; De Petris, M.; de Zotti, G.; Danese, L.; Désert, F.-X.; Desjacques, V.; Di Valentino, E.; Dickinson, C.; Diego, J. M.; Doyle, S.; Durrer, R.; Dvorkin, C.; Eriksen, H. K.; Errard, J.; Feeney, S.; Fernández-Cobos, R.; Finelli, F.; Forastieri, F.; Franceschet, C.; Fuskeland, U.; Galli, S.; Génova-Santos, R. T.; Gerbino, M.; Giusarma, E.; Gomez, A.; González-Nuevo, J.; Grandis, S.; Greenslade, J.; Goupy, J.; Hagstotz, S.; Hanany, S.; Handley, W.; Henrot-Versillé, S.; Hernández-Monteagudo, C.; Hervias-Caimapo, C.; Hills, M.; Hindmarsh, M.; Hivon, E.; Hoang, D. T.; Hooper, D. C.; Hu, B.; Keihänen, E.; Keskitalo, R.; Kiiveri, K.; Kisner, T.; Kitching, T.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lamagna, L.; Lapi, A.; Lasenby, A.; Lattanzi, M.; Le Brun, A. M. C.; Lesgourgues, J.; Liguori, M.; Lindholm, V.; Lizarraga, J.; Luzzi, G.; Macìas-P{érez, J. F.; Maffei, B.; Mandolesi, N.; Martin, S.; Martinez-Gonzalez, E.; Martins, C. J. A. P.; Masi, S.; Massardi, M.; Matarrese, S.; Mazzotta, P.; McCarthy, D.; Melchiorri, A.; Melin, J.-B.; Mennella, A.; Mohr, J.; Molinari, D.; Monfardini, A.; Montier, L.; Natoli, P.; Negrello, M.; Notari, A.; Noviello, F.; Oppizzi, F.; O'Sullivan, C.; Pagano, L.; Paiella, A.; Pajer, E.; Paoletti, D.; Paradiso, S.; Partridge, R. B.; Patanchon, G.; Patil, S. P.; Perdereau, O.; Piacentini, F.; Piat, M.; Pisano, G.; Polastri, L.; Polenta, G.; Pollo, A.; Ponthieu, N.; Poulin, V.; Prêle, D.; Quartin, M.; Ravenni, A.; Remazeilles, M.; Renzi, A.; Ringeval, C.; Roest, D.; Roman, M.; Roukema, B. F.; Rubiño-Martin, J.-A.; Salvati, L.; Scott, D.; Serjeant, S.; Signorelli, G.; Starobinsky, A. A.; Sunyaev, R.; Tan, C. Y.; Tartari, A.; Tasinato, G.; Toffolatti, L.; Tomasi, M.; Torrado, J.; Tramonte, D.; Trappe, N.; Triqueneaux, S.; Tristram, M.; Trombetti, T.; Tucci, M.; Tucker, C.; Urrestilla, J.; Väliviita, J.; Van de Weygaert, R.; Van Tent, B.; Vennin, V.; Verde, L.; Vermeulen, G.; Vielva, P.; Vittorio, N.; Voisin, F.; Wallis, C.; Wandelt, B.; Wehus, I. K.; Weller, J.; Young, K.; Zannoni, M.

    2018-04-01

    Future observations of cosmic microwave background (CMB) polarisation have the potential to answer some of the most fundamental questions of modern physics and cosmology, including: what physical process gave birth to the Universe we see today? What are the dark matter and dark energy that seem to constitute 95% of the energy density of the Universe? Do we need extensions to the standard model of particle physics and fundamental interactions? Is the ΛCDM cosmological scenario correct, or are we missing an essential piece of the puzzle? In this paper, we list the requirements for a future CMB polarisation survey addressing these scientific objectives, and discuss the design drivers of the COREmfive space mission proposed to ESA in answer to the "M5" call for a medium-sized mission. The rationale and options, and the methodologies used to assess the mission's performance, are of interest to other future CMB mission design studies. COREmfive has 19 frequency channels, distributed over a broad frequency range, spanning the 60–600 GHz interval, to control astrophysical foreground emission. The angular resolution ranges from 2' to 18', and the aggregate CMB sensitivity is about 2 μKṡarcmin. The observations are made with a single integrated focal-plane instrument, consisting of an array of 2100 cryogenically-cooled, linearly-polarised detectors at the focus of a 1.2-m aperture cross-Dragone telescope. The mission is designed to minimise all sources of systematic effects, which must be controlled so that no more than 10‑4 of the intensity leaks into polarisation maps, and no more than about 1% of E-type polarisation leaks into B-type modes. COREmfive observes the sky from a large Lissajous orbit around the Sun-Earth L2 point on an orbit that offers stable observing conditions and avoids contamination from sidelobe pick-up of stray radiation originating from the Sun, Earth, and Moon. The entire sky is observed repeatedly during four years of continuous scanning

  16. Designing and conducting health surveys: a comprehensive guide

    National Research Council Canada - National Science Library

    Aday, Lu Ann; Cornelius, Llewellyn Joseph

    2006-01-01

    ... and Carrying Out the Survey 311 14 Preparing the Data for Analysis 340 15 Planning and Implementing the Analysis of the Data 360 16 Writing the Research Report 391 Resource A: Personal Interview Sur...

  17. Informed Design of Mixed-Mode Surveys : Evaluating mode effects on measurement and selection error

    NARCIS (Netherlands)

    Klausch, Thomas|info:eu-repo/dai/nl/341427306

    2014-01-01

    “Mixed-mode designs” are innovative types of surveys which combine more than one mode of administration in the same project, such as surveys administered partly on the web (online), on paper, by telephone, or face-to-face. Mixed-mode designs have become increasingly popular in international survey

  18. Internet, Phone, Mail, and Mixed-Mode Surveys: The Tailored Design Method, 4th Edition

    Science.gov (United States)

    Dillman, Don A.; Smyth, Jolene D.; Christian, Lean Melani

    2014-01-01

    For over two decades, Dillman's classic text on survey design has aided both students and professionals in effectively planning and conducting mail, telephone, and, more recently, Internet surveys. The new edition is thoroughly updated and revised, and covers all aspects of survey research. It features expanded coverage of mobile phones, tablets,…

  19. A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

    Science.gov (United States)

    Glyer-Culver, Betty

    In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

  20. Ergonomic Based Design and Survey of Elementary School Furniture

    Science.gov (United States)

    Maheshwar; Jawalkar, Chandrashekhar S.

    2014-01-01

    This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

  1. Single-Phase Mail Survey Design for Rare Population Subgroups

    Science.gov (United States)

    Brick, J. Michael; Andrews, William R.; Mathiowetz, Nancy A.

    2016-01-01

    Although using random digit dialing (RDD) telephone samples was the preferred method for conducting surveys of households for many years, declining response and coverage rates have led researchers to explore alternative approaches. The use of address-based sampling (ABS) has been examined for sampling the general population and subgroups, most…

  2. Joint NRC/EPA Sewage Sludge Radiological Survey: Survey Design & Test Site Results

    Science.gov (United States)

    This report contains the results of a radiological survey of nine publicly POTWs around the country, which was commissioned by the Sewage Sludge Subcommittee, to determine whether and to what extent radionuclides concentrate in sewage treatment wastes.

  3. A survey of snake-inspired robot designs

    International Nuclear Information System (INIS)

    Hopkins, James K; Spranklin, Brent W; Gupta, Satyandra K

    2009-01-01

    Body undulation used by snakes and the physical architecture of a snake body may offer significant benefits over typical legged or wheeled locomotion designs in certain types of scenarios. A large number of research groups have developed snake-inspired robots to exploit these benefits. The purpose of this review is to report different types of snake-inspired robot designs and categorize them based on their main characteristics. For each category, we discuss their relative advantages and disadvantages. This review will assist in familiarizing a newcomer to the field with the existing designs and their distinguishing features. We hope that by studying existing robots, future designers will be able to create new designs by adopting features from successful robots. The review also summarizes the design challenges associated with the further advancement of the field and deploying snake-inspired robots in practice. (topical review)

  4. A survey of bio-inspired compliant legged robot designs

    International Nuclear Information System (INIS)

    Zhou Xiaodong; Bi Shusheng

    2012-01-01

    The roles of biological springs in vertebrate animals and their implementations in compliant legged robots offer significant advantages over the rigid legged ones in certain types of scenarios. A large number of robotics institutes have been attempting to work in conjunction with biologists and incorporated these principles into the design of biologically inspired robots. The motivation of this review is to investigate the most published compliant legged robots and categorize them according to the types of compliant elements adopted in their mechanical structures. Based on the typical robots investigated, the trade-off between each category is summarized. In addition, the most significant performances of these robots are compared quantitatively, and multiple available solutions for the future compliant legged robot design are suggested. Finally, the design challenges for compliant legged robots are analysed. This review will provide useful guidance for robotic designers in creating new designs by inheriting the virtues of those successful robots according to the specific tasks. (topical review)

  5. The Hyper Suprime-Cam SSP Survey: Overview and survey design

    Science.gov (United States)

    Aihara, Hiroaki; Arimoto, Nobuo; Armstrong, Robert; Arnouts, Stéphane; Bahcall, Neta A.; Bickerton, Steven; Bosch, James; Bundy, Kevin; Capak, Peter L.; Chan, James H. H.; Chiba, Masashi; Coupon, Jean; Egami, Eiichi; Enoki, Motohiro; Finet, Francois; Fujimori, Hiroki; Fujimoto, Seiji; Furusawa, Hisanori; Furusawa, Junko; Goto, Tomotsugu; Goulding, Andy; Greco, Johnny P.; Greene, Jenny E.; Gunn, James E.; Hamana, Takashi; Harikane, Yuichi; Hashimoto, Yasuhiro; Hattori, Takashi; Hayashi, Masao; Hayashi, Yusuke; Hełminiak, Krzysztof G.; Higuchi, Ryo; Hikage, Chiaki; Ho, Paul T. P.; Hsieh, Bau-Ching; Huang, Kuiyun; Huang, Song; Ikeda, Hiroyuki; Imanishi, Masatoshi; Inoue, Akio K.; Iwasawa, Kazushi; Iwata, Ikuru; Jaelani, Anton T.; Jian, Hung-Yu; Kamata, Yukiko; Karoji, Hiroshi; Kashikawa, Nobunari; Katayama, Nobuhiko; Kawanomoto, Satoshi; Kayo, Issha; Koda, Jin; Koike, Michitaro; Kojima, Takashi; Komiyama, Yutaka; Konno, Akira; Koshida, Shintaro; Koyama, Yusei; Kusakabe, Haruka; Leauthaud, Alexie; Lee, Chien-Hsiu; Lin, Lihwai; Lin, Yen-Ting; Lupton, Robert H.; Mandelbaum, Rachel; Matsuoka, Yoshiki; Medezinski, Elinor; Mineo, Sogo; Miyama, Shoken; Miyatake, Hironao; Miyazaki, Satoshi; Momose, Rieko; More, Anupreeta; More, Surhud; Moritani, Yuki; Moriya, Takashi J.; Morokuma, Tomoki; Mukae, Shiro; Murata, Ryoma; Murayama, Hitoshi; Nagao, Tohru; Nakata, Fumiaki; Niida, Mana; Niikura, Hiroko; Nishizawa, Atsushi J.; Obuchi, Yoshiyuki; Oguri, Masamune; Oishi, Yukie; Okabe, Nobuhiro; Okamoto, Sakurako; Okura, Yuki; Ono, Yoshiaki; Onodera, Masato; Onoue, Masafusa; Osato, Ken; Ouchi, Masami; Price, Paul A.; Pyo, Tae-Soo; Sako, Masao; Sawicki, Marcin; Shibuya, Takatoshi; Shimasaku, Kazuhiro; Shimono, Atsushi; Shirasaki, Masato; Silverman, John D.; Simet, Melanie; Speagle, Joshua; Spergel, David N.; Strauss, Michael A.; Sugahara, Yuma; Sugiyama, Naoshi; Suto, Yasushi; Suyu, Sherry H.; Suzuki, Nao; Tait, Philip J.; Takada, Masahiro; Takata, Tadafumi; Tamura, Naoyuki; Tanaka, Manobu M.; Tanaka, Masaomi; Tanaka, Masayuki; Tanaka, Yoko; Terai, Tsuyoshi; Terashima, Yuichi; Toba, Yoshiki; Tominaga, Nozomu; Toshikawa, Jun; Turner, Edwin L.; Uchida, Tomohisa; Uchiyama, Hisakazu; Umetsu, Keiichi; Uraguchi, Fumihiro; Urata, Yuji; Usuda, Tomonori; Utsumi, Yousuke; Wang, Shiang-Yu; Wang, Wei-Hao; Wong, Kenneth C.; Yabe, Kiyoto; Yamada, Yoshihiko; Yamanoi, Hitomi; Yasuda, Naoki; Yeh, Sherry; Yonehara, Atsunori; Yuma, Suraphong

    2018-01-01

    Hyper Suprime-Cam (HSC) is a wide-field imaging camera on the prime focus of the 8.2-m Subaru telescope on the summit of Mauna Kea in Hawaii. A team of scientists from Japan, Taiwan, and Princeton University is using HSC to carry out a 300-night multi-band imaging survey of the high-latitude sky. The survey includes three layers: the Wide layer will cover 1400 deg2 in five broad bands (grizy), with a 5 σ point-source depth of r ≈ 26. The Deep layer covers a total of 26 deg2 in four fields, going roughly a magnitude fainter, while the UltraDeep layer goes almost a magnitude fainter still in two pointings of HSC (a total of 3.5 deg2). Here we describe the instrument, the science goals of the survey, and the survey strategy and data processing. This paper serves as an introduction to a special issue of the Publications of the Astronomical Society of Japan, which includes a large number of technical and scientific papers describing results from the early phases of this survey.

  6. Blade root design a state of the art survey

    Energy Technology Data Exchange (ETDEWEB)

    Sandberg, O

    1988-06-01

    This report was conceived in the wake of recent blade root failures in several horizontal axis turbines. Ten blade root designs are presented. They are considered to represent the state of the art. The information was obtained partly from literature partly from a few important projects with little or no documentation. Suggestions are made how to proceed in the development of the bonded bolt type of root retention. Presently the conclusion is that this type of arrangement seems the most promising. Developments in this field should be closely monitored, however. For this type of very high cycle fatigue designs there is a need for two redundant design principles. (author).

  7. THE HETDEX PILOT SURVEY. I. SURVEY DESIGN, PERFORMANCE, AND CATALOG OF EMISSION-LINE GALAXIES

    International Nuclear Information System (INIS)

    Adams, Joshua J.; Blanc, Guillermo A.; Gebhardt, Karl; Hao, Lei; Byun, Joyce; Fry, Alex; Jeong, Donghui; Komatsu, Eiichiro; Hill, Gary J.; Cornell, Mark E.; MacQueen, Phillip J.; Drory, Niv; Bender, Ralf; Hopp, Ulrich; Kelzenberg, Ralf; Ciardullo, Robin; Gronwall, Caryl; Finkelstein, Steven L.; Gawiser, Eric; Kelz, Andreas

    2011-01-01

    We present a catalog of emission-line galaxies selected solely by their emission-line fluxes using a wide-field integral field spectrograph. This work is partially motivated as a pilot survey for the upcoming Hobby-Eberly Telescope Dark Energy Experiment. We describe the observations, reductions, detections, redshift classifications, line fluxes, and counterpart information for 397 emission-line galaxies detected over 169 □' with a 3500-5800 A bandpass under 5 A full-width-half-maximum (FWHM) spectral resolution. The survey's best sensitivity for unresolved objects under photometric conditions is between 4 and 20x 10 -17 erg s -1 cm -2 depending on the wavelength, and Lyα luminosities between 3 x 10 42 and 6 x 10 42 erg s -1 are detectable. This survey method complements narrowband and color-selection techniques in the search of high-redshift galaxies with its different selection properties and large volume probed. The four survey fields within the COSMOS, GOODS-N, MUNICS, and XMM-LSS areas are rich with existing, complementary data. We find 105 galaxies via their high-redshift Lyα emission at 1.9 44 □' which appear to be extended Lyα nebulae. We also find three high-z objects with rest-frame Lyα EW above the level believed to be achievable with normal star formation, EW 0 >240 A. Future papers will investigate the physical properties of this sample.

  8. Net Survey: "Top Ten Mistakes" in Academic Web Design.

    Science.gov (United States)

    Petrik, Paula

    2000-01-01

    Highlights the top ten mistakes in academic Web design: (1) bloated graphics; (2) scaling images; (3) dense text; (4) lack of contrast; (5) font size; (6) looping animations; (7) courseware authoring software; (8) scrolling/long pages; (9) excessive download; and (10) the nothing site. Includes resources. (CMK)

  9. Assessing Online Faculty: More than Student Surveys and Design Rubrics

    Science.gov (United States)

    Piña, Anthony A.; Bohn, Larry

    2014-01-01

    As online education continues to grow, so do the number of online courses being taught by those who did not develop the courses. However, the most popular rubrics for evaluating the quality of online courses tend to focus upon the course's design, not upon the actions of the instructor teaching the course. In this study, 140 distance education…

  10. Multivariable control in nuclear power stations -survey of design methods

    International Nuclear Information System (INIS)

    Mcmorran, P.D.

    1979-12-01

    The development of larger nuclear generating stations increases the importance of dynamic interaction between controllers, because each control action may affect several plant outputs. Multivariable control provides the techniques to design controllers which perform well under these conditions. This report is a foundation for further work on the application of multivariable control in AECL. It covers the requirements of control and the fundamental mathematics used, then reviews the most important linear methods, based on both state-space and frequency-response concepts. State-space methods are derived from analysis of the system differential equations, while frequency-response methods use the input-output transfer function. State-space methods covered include linear-quadratic optimal control, pole shifting, and the theory of state observers and estimators. Frequency-response methods include the inverse Nyquist array method, and classical non-interactive techniques. Transfer-function methods are particularly emphasized since they can incorporate ill-defined design criteria. The underlying concepts, and the application strengths and weaknesses of each design method are presented. A review of significant applications is also given. It is concluded that the inverse Nyquist array method, a frequency-response technique based on inverse transfer-function matrices, is preferred for the design of multivariable controllers for nuclear power plants. This method may be supplemented by information obtained from a modal analysis of the plant model. (auth)

  11. A Survey study on design procedure of Seismic Base Isolation ...

    African Journals Online (AJOL)

    Adding shear walls or braced frames can decrease the potential damage caused by earthquakes.We can isolate the structures from the ground using the Seismic Base Isolation Systems that is flexible approach to decrease the potential damage. In this research we present information on the design procedure of seismic ...

  12. The Brightest of Reionizing Galaxies Survey: Design and Preliminary Results

    Science.gov (United States)

    Trenti, M.; Bradley, L. D.; Stiavelli, M.; Oesch, P.; Treu, T.; Bouwens, R. J.; Shull, J. M.; MacKenty, J. W.; Carollo, C. M.; Illingworth, G. D.

    2011-02-01

    We present the first results on the search for very bright (M AB ≈ -21) galaxies at redshift z ~ 8 from the Brightest of Reionizing Galaxies (BoRG) survey. BoRG is a Hubble Space Telescope Wide Field Camera 3 (WFC3) pure-parallel survey that is obtaining images on random lines of sight at high Galactic latitudes in four filters (F606W, F098M, F125W, and F160W), with integration times optimized to identify galaxies at z >~ 7.5 as F098M dropouts. We discuss here results from a search area of approximately 130 arcmin2 over 23 BoRG fields, complemented by six other pure-parallel WFC3 fields with similar filters. This new search area is more than two times wider than previous WFC3 observations at z ~ 8. We identify four F098M-dropout candidates with high statistical confidence (detected at greater than 8σ confidence in F125W). These sources are among the brightest candidates currently known at z ~ 8 and approximately 10 times brighter than the z = 8.56 galaxy UDFy-38135539. They thus represent ideal targets for spectroscopic follow-up observations and could potentially lead to a redshift record, as our color selection includes objects up to z ~ 9. However, the expected contamination rate of our sample is about 30% higher than typical searches for dropout galaxies in legacy fields, such as the GOODS and HUDF, where deeper data and additional optical filters are available to reject contaminants. Based on observations made with the NASA/ESA Hubble Space Telescope, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with Programs 11700, 11702.

  13. THE BRIGHTEST OF REIONIZING GALAXIES SURVEY: DESIGN AND PRELIMINARY RESULTS

    International Nuclear Information System (INIS)

    Trenti, M.; Bradley, L. D.; Stiavelli, M.; MacKenty, J. W.; Oesch, P.; Carollo, C. M.; Treu, T.; Bouwens, R. J.; Illingworth, G. D.; Shull, J. M.

    2011-01-01

    We present the first results on the search for very bright (M AB ∼ -21) galaxies at redshift z ∼ 8 from the Brightest of Reionizing Galaxies (BoRG) survey. BoRG is a Hubble Space Telescope Wide Field Camera 3 (WFC3) pure-parallel survey that is obtaining images on random lines of sight at high Galactic latitudes in four filters (F606W, F098M, F125W, and F160W), with integration times optimized to identify galaxies at z ∼> 7.5 as F098M dropouts. We discuss here results from a search area of approximately 130 arcmin 2 over 23 BoRG fields, complemented by six other pure-parallel WFC3 fields with similar filters. This new search area is more than two times wider than previous WFC3 observations at z ∼ 8. We identify four F098M-dropout candidates with high statistical confidence (detected at greater than 8σ confidence in F125W). These sources are among the brightest candidates currently known at z ∼ 8 and approximately 10 times brighter than the z = 8.56 galaxy UDFy-38135539. They thus represent ideal targets for spectroscopic follow-up observations and could potentially lead to a redshift record, as our color selection includes objects up to z ∼ 9. However, the expected contamination rate of our sample is about 30% higher than typical searches for dropout galaxies in legacy fields, such as the GOODS and HUDF, where deeper data and additional optical filters are available to reject contaminants.

  14. Effects of sample survey design on the accuracy of classification tree models in species distribution models

    Science.gov (United States)

    Thomas C. Edwards; D. Richard Cutler; Niklaus E. Zimmermann; Linda Geiser; Gretchen G. Moisen

    2006-01-01

    We evaluated the effects of probabilistic (hereafter DESIGN) and non-probabilistic (PURPOSIVE) sample surveys on resultant classification tree models for predicting the presence of four lichen species in the Pacific Northwest, USA. Models derived from both survey forms were assessed using an independent data set (EVALUATION). Measures of accuracy as gauged by...

  15. Survey on Chatbot Design Techniques in Speech Conversation Systems

    OpenAIRE

    Sameera A. Abdul-Kader; Dr. John Woods

    2015-01-01

    Human-Computer Speech is gaining momentum as a technique of computer interaction. There has been a recent upsurge in speech based search engines and assistants such as Siri, Google Chrome and Cortana. Natural Language Processing (NLP) techniques such as NLTK for Python can be applied to analyse speech, and intelligent responses can be found by designing an engine to provide appropriate human like responses. This type of programme is called a Chatbot, which is the focus of this study. This pap...

  16. A Survey on the Color of Interior Design for University Students

    OpenAIRE

    Takata, Hiroshi

    2008-01-01

    The purpose of this study is to clarify the actual conditions of the color on interior design for university students. At first, the author carried out the questionnaire survey in order to grasp the characteristics of respondents and their consciousness of interior and color design. Based on the results of the questionnaire survey, the relationship between the characteristics of respondents and their consciousness was studied. Especially, the influence of the respondents' academic grade and t...

  17. Effect of survey design and catch rate estimation on total catch estimates in Chinook salmon fisheries

    Science.gov (United States)

    McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

    2012-01-01

    Roving–roving and roving–access creel surveys are the primary techniques used to obtain information on harvest of Chinook salmon Oncorhynchus tshawytscha in Idaho sport fisheries. Once interviews are conducted using roving–roving or roving–access survey designs, mean catch rate can be estimated with the ratio-of-means (ROM) estimator, the mean-of-ratios (MOR) estimator, or the MOR estimator with exclusion of short-duration (≤0.5 h) trips. Our objective was to examine the relative bias and precision of total catch estimates obtained from use of the two survey designs and three catch rate estimators for Idaho Chinook salmon fisheries. Information on angling populations was obtained by direct visual observation of portions of Chinook salmon fisheries in three Idaho river systems over an 18-d period. Based on data from the angling populations, Monte Carlo simulations were performed to evaluate the properties of the catch rate estimators and survey designs. Among the three estimators, the ROM estimator provided the most accurate and precise estimates of mean catch rate and total catch for both roving–roving and roving–access surveys. On average, the root mean square error of simulated total catch estimates was 1.42 times greater and relative bias was 160.13 times greater for roving–roving surveys than for roving–access surveys. Length-of-stay bias and nonstationary catch rates in roving–roving surveys both appeared to affect catch rate and total catch estimates. Our results suggest that use of the ROM estimator in combination with an estimate of angler effort provided the least biased and most precise estimates of total catch for both survey designs. However, roving–access surveys were more accurate than roving–roving surveys for Chinook salmon fisheries in Idaho.

  18. The renewable portfolio standard: design considerations and an implementation survey

    International Nuclear Information System (INIS)

    Berry, T.; Jaccard, M.

    2001-01-01

    Renewables have social and environmental benefits compared to conventional electricity sources, but are rarely competitive on a strict financial cost basis. This is because conventional sources are sometimes subsidized, their full pollution costs are ignored, and renewables involve newer, higher-cost technologies whose relative costs will fall with commercialization. Governments use several mechanisms to support renewables, including direct financial support (grants, loans), indirect support (R and D, demonstrations), reform of financial costs of conventional sources (subsidy removal, pollution taxes), and the Renewable Portfolio Standard (RPS). The RPS requires a minimum share of electricity from renewable energy sources. Its use is spreading because it maintains an incentive for renewable producers to reduce costs, links the regulated market outcome to an environmental target, and reduces government involvement. Although it is too early to evaluate fully its effectiveness, the survey for this study explored implementation issues in three European countries, nine US states, and Australia, and found the following. The RPS target is usually set to have environmental benefits without causing significant price increases (cost caps are sometimes used). Most jurisdictions limit eligibility to grid-connected, domestic renewables. The RPS is usually applied to producers rather than consumers, and to energy output not capacity. Flexibility mechanisms are desired but a challenge to implement. Administration in the US and Australia is by government with delegation to independent utility regulators, while in Europe it is more the responsibility of government. Everywhere, the RPS is applied alongside other mechanisms of renewables support. (author)

  19. Hit by a Perfect Storm? Art & Design in the National Student Survey

    Science.gov (United States)

    Yorke, Mantz; Orr, Susan; Blair, Bernadette

    2014-01-01

    There has long been the suspicion amongst staff in Art & Design that the ratings given to their subject disciplines in the UK's National Student Survey are adversely affected by a combination of circumstances--a "perfect storm". The "perfect storm" proposition is tested by comparing ratings for Art & Design with those…

  20. Designing questionnaires: healthcare survey to compare two different response scales

    Science.gov (United States)

    2014-01-01

    Background A widely discussed design issue in patient satisfaction questionnaires is the optimal length and labelling of the answering scale. The aim of the present study was to compare intra-individually the answers on two response scales to five general questions evaluating patients’ perception of hospital care. Methods Between November 2011 and January 2012, all in-hospital patients at a Swiss University Hospital received a patient satisfaction questionnaire on an adjectival scale with three to four labelled categories (LS) and five redundant questions displayed on an 11-point end-anchored numeric scale (NS). The scales were compared concerning ceiling effect, internal consistency (Cronbach’s alpha), individual item answers (Spearman’s rank correlation), and concerning overall satisfaction by calculating an overall percentage score (sum of all answers related to the maximum possible sum). Results The response rate was 41% (2957/7158), of which 2400 (81%) completely filled out all questions. Baseline characteristics of the responders and non-responders were similar. Floor and ceiling effect were high on both response scales, but more pronounced on the LS than on the NS. Cronbach’s alpha was higher on the NS than on the LS. There was a strong individual item correlation between both answering scales in questions regarding the intent to return, quality of treatment and the judgement whether the patient was treated with respect and dignity, but a lower correlation concerning satisfactory information transfer by physicians or nurses, where only three categories were available in the LS. The overall percentage score showed a comparable distribution, but with a wider spread of lower satisfaction in the NS. Conclusions Since the longer scale did not substantially reduce the ceiling effect, the type of questions rather than the type of answering scale could be addressed with a focus on specific questions about concrete situations instead of general questions

  1. Wide Field Infrared Survey Telescope [WFIRST]: telescope design and simulated performance

    Science.gov (United States)

    Goullioud, R.; Content, D. A.; Kuan, G. M.; Moore, J. D.; Chang, Z.; Sunada, E. T.; Villalvazo, J.; Hawk, J. P.; Armani, N. V.; Johnson, E. L.; Powell, C. A.

    2012-09-01

    The Wide Field Infrared Survey Telescope (WFIRST) mission concept was ranked first in new space astrophysics missions by the Astro2010 Decadal Survey, incorporating the Joint Dark Energy Mission payload concept and multiple science white papers. This mission is based on a space telescope at L2 studying exoplanets [via gravitational microlensing], probing dark energy, and surveying the near infrared sky. Since the release of the Astro2010 Decadal Survey, the team has been working with the WFIRST Science Definition Team to refine mission and payload concepts. We present the current interim reference mission point design of the payload, based on the use of a 1.3m unobscured aperture three mirror anastigmat form, with focal imaging and slit-less spectroscopy science channels. We also present the first results of Structural/Thermal/Optical performance modeling of the telescope point design.

  2. Visual Design, Order Effects, and Respondent Characteristics in a Self-Administered Survey

    Directory of Open Access Journals (Sweden)

    Michael Stern

    2007-12-01

    Full Text Available Recent survey design research has shown that small changes in the structure and visual layout of questions can affect respondents' answers. While the findings have provided strong evidence of such effects, they are limited by the homogeneity of their samples, in that many of these studies have used random samples of college students. In this paper, we examine the effects of seven experimental alterations in question format and visual design using data from a general population survey that allows us to examine the effects of demographic differences among respondents. Results from a 2005 random sample mail survey of 1,315 households in a small metropolitan region of the United States suggest that the visual layout of survey questions affects different demographic groups in similar ways.

  3. A Survey on Efficient Collaboration of Design and Simulation in Product Development

    OpenAIRE

    Kreimeyer, M.;Deubzer, F.;Herfeld, U..;Lindemann, U.

    2017-01-01

    Efficient collaboration is a popular topic in all kinds of industry with products evolving into evermore complex sytems and with taylorism in product development increasing. With the goal of satisfying the customer’s functional desires for the product, the cooperation of embodiment design, simulation and testing departments in a company plays an essential role. The results of a survey to explore problems and chances of the former two are layed out in the following. For the survey, about 50 qu...

  4. The Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS): survey design, data catalogue and GAMA/WiggleZ spectroscopy

    Science.gov (United States)

    Ching, John H. Y.; Sadler, Elaine M.; Croom, Scott M.; Johnston, Helen M.; Pracy, Michael B.; Couch, Warrick J.; Hopkins, A. M.; Jurek, Russell J.; Pimbblet, K. A.

    2017-01-01

    We present the Large Area Radio Galaxy Evolution Spectroscopic Survey (LARGESS), a spectroscopic catalogue of radio sources designed to include the full range of radio AGN populations out to redshift z ˜ 0.8. The catalogue covers ˜800 deg2 of sky, and provides optical identifications for 19 179 radio sources from the 1.4 GHz Faint Images of the Radio Sky at Twenty-cm (FIRST) survey down to an optical magnitude limit of Imod point-like objects are included, and no colour cuts are applied. In collaboration with the WiggleZ and Galaxy And Mass Assembly (GAMA) spectroscopic survey teams, we have obtained new spectra for over 5000 objects in the LARGESS sample. Combining these new spectra with data from earlier surveys provides spectroscopic data for 12 329 radio sources in the survey area, of which 10 856 have reliable redshifts. 85 per cent of the LARGESS spectroscopic sample are radio AGN (median redshift z = 0.44), and 15 per cent are nearby star-forming galaxies (median z = 0.08). Low-excitation radio galaxies (LERGs) comprise the majority (83 per cent) of LARGESS radio AGN at z < 0.8, with 12 per cent being high-excitation radio galaxies (HERGs) and 5 per cent radio-loud QSOs. Unlike the more homogeneous LERG and QSO sub-populations, HERGs are a heterogeneous class of objects with relatively blue optical colours and a wide dispersion in mid-infrared colours. This is consistent with a picture in which most HERGs are hosted by galaxies with recent or ongoing star formation as well as a classical accretion disc.

  5. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  6. [Design and implementation of data checking system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Qi, Yuan-Hua; Wang, Ling; Zhao, Yu-Ping; Wang, Wei; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    The Chinese material medica resources (CMMR) national survey information management system has collected a large amount of data. To help dealing with data recheck, reduce the work of inside, improve the recheck of survey data from provincial and county level, National Resource Center for Chinese Materia Medical has designed a data checking system for Chinese material medica resources survey based on J2EE technology, Java language, Oracle data base in accordance with the SOA framework. It includes single data check, check score, content manage, check the survey data census data with manual checking and automatic checking about census implementation plan, key research information, general survey information, cultivation of medicinal materials information, germplasm resources information the medicine information, market research information, traditional knowledge information, specimen information of this 9 aspects 20 class 175 indicators in two aspects of the quantity and quality. The established system assists in the completion of the data consistency and accuracy, pushes the county survey team timely to complete the data entry arrangement work, so as to improve the integrity, consistency and accuracy of the survey data, and ensure effective and available data, which lay a foundation for providing accurate data support for national survey of the Chinese material medica resources (CMMR) results summary, and displaying results and sharing. Copyright© by the Chinese Pharmaceutical Association.

  7. Design and operation of the national home health aide survey: 2007-2008.

    Science.gov (United States)

    Bercovitz, Anita; Moss, Abigail J; Sengupta, Manisha; Harris-Kojetin, Lauren D; Squillace, Marie R; Emily, Rosenoff; Branden, Laura

    2010-03-01

    This report provides an overview of the National Home Health Aide Survey (NHHAS), the first national probability survey of home health aides. NHHAS was designed to provide national estimates of home health aides who provided assistance in activities of daily living (ADLs) and were directly employed by agencies that provide home health and/or hospice care. This report discusses the need for and objectives of the survey, the design process, the survey methods, and data availability. METHODS NHHAS, a multistage probability sample survey, was conducted as a supplement to the 2007 National Home and Hospice Care Survey (NHHCS). Agencies providing home health and/or hospice care were sampled, and then aides employed by these agencies were sampled and interviewed by telephone. Survey topics included recruitment, training, job history, family life, client relations, work-related injuries, and demographics. NHHAS was virtually identical to the 2004 National Nursing Assistant Survey of certified nursing assistants employed in sampled nursing homes with minor changes to account for differences in workplace environment and responsibilities. RESULTS From September 2007 to April 2008, interviews were completed with 3,416 aides. A public-use data file that contains the interview responses, sampling weights, and design variables is available. The NHHAS overall response rate weighted by the inverse of the probability of selection was 41 percent. This rate is the product of the weighted first-stage agency response rate of 57 percent (i.e., weighted response rate of 59 percent for agency participation in NHHCS times the weighted response rate of 97 percent for agencies participating in NHHCS that also participated in NHHAS) and the weighted second-stage aide response rate of 72 percent to NHHAS.

  8. Simulating future uncertainty to guide the selection of survey designs for long-term monitoring

    Science.gov (United States)

    Garman, Steven L.; Schweiger, E. William; Manier, Daniel J.; Gitzen, Robert A.; Millspaugh, Joshua J.; Cooper, Andrew B.; Licht, Daniel S.

    2012-01-01

    A goal of environmental monitoring is to provide sound information on the status and trends of natural resources (Messer et al. 1991, Theobald et al. 2007, Fancy et al. 2009). When monitoring observations are acquired by measuring a subset of the population of interest, probability sampling as part of a well-constructed survey design provides the most reliable and legally defensible approach to achieve this goal (Cochran 1977, Olsen et al. 1999, Schreuder et al. 2004; see Chapters 2, 5, 6, 7). Previous works have described the fundamentals of sample surveys (e.g. Hansen et al. 1953, Kish 1965). Interest in survey designs and monitoring over the past 15 years has led to extensive evaluations and new developments of sample selection methods (Stevens and Olsen 2004), of strategies for allocating sample units in space and time (Urquhart et al. 1993, Overton and Stehman 1996, Urquhart and Kincaid 1999), and of estimation (Lesser and Overton 1994, Overton and Stehman 1995) and variance properties (Larsen et al. 1995, Stevens and Olsen 2003) of survey designs. Carefully planned, “scientific” (Chapter 5) survey designs have become a standard in contemporary monitoring of natural resources. Based on our experience with the long-term monitoring program of the US National Park Service (NPS; Fancy et al. 2009; Chapters 16, 22), operational survey designs tend to be selected using the following procedures. For a monitoring indicator (i.e. variable or response), a minimum detectable trend requirement is specified, based on the minimum level of change that would result in meaningful change (e.g. degradation). A probability of detecting this trend (statistical power) and an acceptable level of uncertainty (Type I error; see Chapter 2) within a specified time frame (e.g. 10 years) are specified to ensure timely detection. Explicit statements of the minimum detectable trend, the time frame for detecting the minimum trend, power, and acceptable probability of Type I error (

  9. The Laboratory Course Assessment Survey: A Tool to Measure Three Dimensions of Research-Course Design

    Science.gov (United States)

    Corwin, Lisa A.; Runyon, Christopher; Robinson, Aspen; Dolan, Erin L.

    2015-01-01

    Course-based undergraduate research experiences (CUREs) are increasingly being offered as scalable ways to involve undergraduates in research. Yet few if any design features that make CUREs effective have been identified. We developed a 17-item survey instrument, the Laboratory Course Assessment Survey (LCAS), that measures students’ perceptions of three design features of biology lab courses: 1) collaboration, 2) discovery and relevance, and 3) iteration. We assessed the psychometric properties of the LCAS using established methods for instrument design and validation. We also assessed the ability of the LCAS to differentiate between CUREs and traditional laboratory courses, and found that the discovery and relevance and iteration scales differentiated between these groups. Our results indicate that the LCAS is suited for characterizing and comparing undergraduate biology lab courses and should be useful for determining the relative importance of the three design features for achieving student outcomes. PMID:26466990

  10. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

    OpenAIRE

    Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

  11. Musculoskeletal impairment survey in Rwanda: Design of survey tool, survey methodology, and results of the pilot study (a cross sectional survey

    Directory of Open Access Journals (Sweden)

    Simms Victoria

    2007-03-01

    Full Text Available Abstract Background Musculoskeletal impairment (MSI is an important cause of morbidity and mortality worldwide, especially in developing countries. Prevalence studies for MSI in the developing world have used varying methodologies and are seldom directly comparable. This study aimed to develop a new tool to screen for and diagnose MSI and to pilot test the methodology for a national survey in Rwanda. Methods A 7 question screening tool to identify cases of MSI was developed through literature review and discussions with healthcare professionals. To validate the tool, trained rehabilitation technicians screened 93 previously identified gold standard 'cases' and 86 'non cases'. Sensitivity, specificity and positive predictive value were calculated. A standardised examination protocol was developed to determine the aetiology and diagnosis of MSI for those who fail the screening test. For the national survey in Rwanda, multistage cluster random sampling, with probability proportional to size procedures will be used for selection of a cross-sectional, nationally representative sample of the population. Households to be surveyed will be chosen through compact segment sampling and all individuals within chosen households will be screened. A pilot survey of 680 individuals was conducted using the protocol. Results: The screening tool demonstrated 99% sensitivity and 97% specificity for MSI, and a positive predictive value of 98%. During the pilot study 468 out of 680 eligible subjects (69% were screened. 45 diagnoses were identified in 38 persons who were cases of MSI. The subjects were grouped into categories based on diagnostic subgroups of congenital (1, traumatic (17, infective (2 neurological (6 and other acquired(19. They were also separated into mild (42.1%, moderate (42.1% and severe (15.8% cases, using an operational definition derived from the World Health Organisation's International Classification of Functioning, Disability and Health

  12. Final report on the radiological surveys of designated DX firing sites at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    1996-01-01

    CHEMRAD was contracted by Los Alamos National Laboratory to perform USRADS reg-sign (UltraSonic Ranging And Data System) radiation scanning surveys at designated DX Sites at the Los Alamos National Laboratory. The primary purpose of these scanning surveys was to identify the presence of Depleted Uranium (D-38) resulting from activities at the DX Firing Sites. This effort was conducted to update the most recent surveys of these areas. This current effort was initiated with site orientation on August 12, 1996. Surveys were completed in the field on September 4, 1996. This Executive Summary briefly presents the major findings of this work. The detail survey results are presented in the balance of this report and are organized by Technical Area and Site number in section 2. This organization is not in chronological order. USRADS and the related survey methods are described in section 3. Quality Control issues are addressed in section 4. Surveys were conducted with an array of radiation detectors either mounted on a backpack frame for man-carried use (Manual mode) or on a tricycle cart (RadCart mode). The array included radiation detectors for gamma and beta surface near surface contamination as well as dose rate at 1 meter above grade. The radiation detectors were interfaced directly to an USRADS 2100 Data Pack

  13. Progress in XRCS-Survey plant instrumentation and control design for ITER

    International Nuclear Information System (INIS)

    Varshney, Sanjeev; Jha, Shivakant; Simrock, Stefan; Barnsley, Robin; Martin, Vincent; Mishra, Sapna; Patil, Prabhakant; Patel, Shreyas; Kumar, Vinay

    2016-01-01

    Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

  14. Progress in XRCS-Survey plant instrumentation and control design for ITER

    Energy Technology Data Exchange (ETDEWEB)

    Varshney, Sanjeev, E-mail: sanjeev.varshney@iter-india.org [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Jha, Shivakant [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Simrock, Stefan; Barnsley, Robin; Martin, Vincent [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Mishra, Sapna [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India); Patil, Prabhakant [ITER-Organization, Route de Vinon sur Verdon, CS 90 046, 13067 St. Paul-Lez-Durance, Cedex (France); Patel, Shreyas; Kumar, Vinay [ITER-India, Institute for Plasma Research, Bhat, Gandhinagar, 382 428 (India)

    2016-11-15

    Highlights: • An identification of the major process functions system compliant to Plant Control Design Handbook (PCDH) has been made for XRCS-Survey plant I&C. • I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using Enterprise architect (EA). • I&C architecture, interface with ITER networks and Plants, configuration of cubicles are discussed towards nine design review deliverables. - Abstract: A real time, plasma impurity survey system based on X-ray Crystal Spectroscopy (XRCS) has been designed for ITER and will be made available in the set of first plasma diagnostics for measuring impurity ion concentrations and their in-flux. For the purpose of developing a component level design of XRCS-Survey plant I&C system that is compliant to the rules and guidelines defined in the Plant Control Design Handbook (PCDH), firstly an identification of the major process functions has been made. The preliminary plant I&C Functional Breakdown Structure (FBS) and Operation Procedure (OP) have been drafted using a system engineering tool, Enterprise Architect (EA). Conceptual I&C architecture, interface with the ITER networks and other Plants have been discussed along with the basic configuration of I&C cubicles aiming towards nine I&C deliverables for the design review.

  15. The Danish National Health Survey 2010. Study design and respondent characteristics

    DEFF Research Database (Denmark)

    Christensen, Anne Illemann; Ekholm, Ola; Glümer, Charlotte

    2012-01-01

    In 2010 the five Danish regions and the National Institute of Public Health at the University of Southern Denmark conducted a national representative health survey among the adult population in Denmark. This paper describes the study design and the sample and study population as well as the conte...

  16. "Is This Ethical?" A Survey of Opinion on Principles and Practices of Document Design.

    Science.gov (United States)

    Dragga, Sam

    1996-01-01

    Reprints a corrected version of an article originally published in the volume 43, number 1 issue of this journal. Presents results of a national survey of technical communicators and technical communication teachers assessing the ethics of seven document design cases involving manipulation of typography, illustrations, and photographs. Offers…

  17. A survey of the French creep-fatigue design rules for LMFBR

    International Nuclear Information System (INIS)

    Tribout, J.; Cordier, G.; Moulin, D.

    1987-01-01

    The paper provides a survey of the creep-fatigue design rules for the LMFBR in France. These rules are the ones currently implemented in French component manufacturing. The background of each item is discussed and the trends for improvements currently investigated are described. The creep-fatigue rules apply to elastic analysis only. (orig.)

  18. Report on the Survey of the Design Review of New Reactor Applications. Volume 3: Reactor

    International Nuclear Information System (INIS)

    Downey, Steven; Monninger, John; Nevalainen, Janne; Lorin, Aurelie; ); Webster, Philip; Joyer, Philippe; Kawamura, Tomonori; Lankin, Mikhail; Kubanyi, Jozef; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Kang, Kyungmin; Kim, Walter

    2016-01-01

    At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This document, which is the third report on the results of the Design Phase Survey, focuses on the Reactor. The Reactor category includes the following technical topics: fuel system design, reactor internals and core support, nuclear design and core nuclear performance, thermal and hydraulic design, reactor materials, and functional design of reactivity control system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - Design review strategies most commonly used to confirm that the regulatory requirements have been met include document review and independent verification of calculations, computer codes, or models used to describe the design and performance of the core and the fuel. - It is common to consider operating experience and

  19. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  20. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  1. The Design and Implementation of the 2016 National Survey of Children's Health.

    Science.gov (United States)

    Ghandour, Reem M; Jones, Jessica R; Lebrun-Harris, Lydie A; Minnaert, Jessica; Blumberg, Stephen J; Fields, Jason; Bethell, Christina; Kogan, Michael D

    2018-05-09

    Introduction Since 2001, the Health Resources and Services Administration's Maternal and Child Health Bureau (HRSA MCHB) has funded and directed the National Survey of Children's Health (NSCH) and the National Survey of Children with Special Health Care Needs (NS-CSHCN), unique sources of national and state-level data on child health and health care. Between 2012 and 2015, HRSA MCHB redesigned the surveys, combining content into a single survey, and shifting from a periodic interviewer-assisted telephone survey to an annual self-administered web/paper-based survey utilizing an address-based sampling frame. Methods The U.S. Census Bureau fielded the redesigned NSCH using a random sample of addresses drawn from the Census Master Address File, supplemented with a unique administrative flag to identify households most likely to include children. Data were collected June 2016-February 2017 using a multi-mode design, encouraging web-based responses while allowing for paper mail-in responses. A parent/caregiver knowledgeable about the child's health completed an age-appropriate questionnaire. Experiments on incentives, branding, and contact strategies were conducted. Results Data were released in September 2017. The final sample size was 50,212 children; the overall weighted response rate was 40.7%. Comparison of 2016 estimates to those from previous survey iterations are not appropriate due to sampling and mode changes. Discussion The NSCH remains an invaluable data source for key measures of child health and attendant health care system, family, and community factors. The redesigned survey extended the utility of this resource while seeking a balance between previous strengths and innovations now possible.

  2. Survey of control-room design practices with respect to human factors engineering

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1980-01-01

    Human factors engineering is an interdisciplinary speciality concerned with influencing the design of equipment systems, facilities, and operational environments to promote safe, efficient, and reliable operator performance. This emphasis has been applied to most military and space systems in the past 30 y. A review of five nuclear power-plant control rooms, reported in the November-December 1977 issue of Nuclear Safety, revealed that human factors principles of design have generally not been incorporated in present-generation control rooms. This article summarizes the findings of a survey of 20 control-board designers from a mix of nuclear steam-supply system and architect-engineering firms. The interviews with these designers probed design methods currently used in developing control rooms. From these data it was concluded that there is currently no consistent, formal, uniform concern for the human factors aspects of control-room design on the part of the design organizations, the utilities, or the Nuclear Regulatory Commission. Although all the parties involved are concerned with human factors issues, this responsibility is not focused, and human factors yardsticks, or design standards, specific to power plants have not been evolved and applied in the development and verification of control-room designs from the standpoint of the man-machine interface

  3. Creel survey sampling designs for estimating effort in short-duration Chinook salmon fisheries

    Science.gov (United States)

    McCormick, Joshua L.; Quist, Michael C.; Schill, Daniel J.

    2013-01-01

    Chinook Salmon Oncorhynchus tshawytscha sport fisheries in the Columbia River basin are commonly monitored using roving creel survey designs and require precise, unbiased catch estimates. The objective of this study was to examine the relative bias and precision of total catch estimates using various sampling designs to estimate angling effort under the assumption that mean catch rate was known. We obtained information on angling populations based on direct visual observations of portions of Chinook Salmon fisheries in three Idaho river systems over a 23-d period. Based on the angling population, Monte Carlo simulations were used to evaluate the properties of effort and catch estimates for each sampling design. All sampling designs evaluated were relatively unbiased. Systematic random sampling (SYS) resulted in the most precise estimates. The SYS and simple random sampling designs had mean square error (MSE) estimates that were generally half of those observed with cluster sampling designs. The SYS design was more efficient (i.e., higher accuracy per unit cost) than a two-cluster design. Increasing the number of clusters available for sampling within a day decreased the MSE of estimates of daily angling effort, but the MSE of total catch estimates was variable depending on the fishery. The results of our simulations provide guidelines on the relative influence of sample sizes and sampling designs on parameters of interest in short-duration Chinook Salmon fisheries.

  4. The Design and Validation of the Colorado Learning Attitudes about Science Survey

    Science.gov (United States)

    Adams, W. K.; Perkins, K. K.; Dubson, M.; Finkelstein, N. D.; Wieman, C. E.

    2005-09-01

    The Colorado Learning Attitudes about Science Survey (CLASS) is a new instrument designed to measure various facets of student attitudes and beliefs about learning physics. This instrument extends previous work by probing additional facets of student attitudes and beliefs. It has been written to be suitably worded for students in a variety of different courses. This paper introduces the CLASS and its design and validation studies, which include analyzing results from over 2400 students, interviews and factor analyses. Methodology used to determine categories and how to analyze the robustness of categories for probing various facets of student learning are also described. This paper serves as the foundation for the results and conclusions from the analysis of our survey data.

  5. Deep Extragalactic VIsible Legacy Survey (DEVILS): Motivation, Design and Target Catalogue

    Science.gov (United States)

    Davies, L. J. M.; Robotham, A. S. G.; Driver, S. P.; Lagos, C. P.; Cortese, L.; Mannering, E.; Foster, C.; Lidman, C.; Hashemizadeh, A.; Koushan, S.; O'Toole, S.; Baldry, I. K.; Bilicki, M.; Bland-Hawthorn, J.; Bremer, M. N.; Brown, M. J. I.; Bryant, J. J.; Catinella, B.; Croom, S. M.; Grootes, M. W.; Holwerda, B. W.; Jarvis, M. J.; Maddox, N.; Meyer, M.; Moffett, A. J.; Phillipps, S.; Taylor, E. N.; Windhorst, R. A.; Wolf, C.

    2018-06-01

    The Deep Extragalactic VIsible Legacy Survey (DEVILS) is a large spectroscopic campaign at the Anglo-Australian Telescope (AAT) aimed at bridging the near and distant Universe by producing the highest completeness survey of galaxies and groups at intermediate redshifts (0.3 < z < 1.0). Our sample consists of ˜60,000 galaxies to Y<21.2 mag, over ˜6 deg2 in three well-studied deep extragalactic fields (Cosmic Origins Survey field, COSMOS, Extended Chandra Deep Field South, ECDFS and the X-ray Multi-Mirror Mission Large-Scale Structure region, XMM-LSS - all Large Synoptic Survey Telescope deep-drill fields). This paper presents the broad experimental design of DEVILS. Our target sample has been selected from deep Visible and Infrared Survey Telescope for Astronomy (VISTA) Y-band imaging (VISTA Deep Extragalactic Observations, VIDEO and UltraVISTA), with photometry measured by PROFOUND. Photometric star/galaxy separation is done on the basis of NIR colours, and has been validated by visual inspection. To maximise our observing efficiency for faint targets we employ a redshift feedback strategy, which continually updates our target lists, feeding back the results from the previous night's observations. We also present an overview of the initial spectroscopic observations undertaken in late 2017 and early 2018.

  6. Survey of advanced radiation technologies used at designated cancer care hospitals in Japan

    International Nuclear Information System (INIS)

    Shikama, Naoto; Tsujino, Kayoko; Nakamura, Katsumasa; Ishikura, Satoshi

    2014-01-01

    Our survey assessed the use of advanced radiotherapy technologies at the designated cancer care hospitals in Japan, and we identified several issues to be addressed. We collected the data of 397 designated cancer care hospitals, including information on staffing in the department of radiation oncology (e.g. radiation oncologists, medical physicists and radiation therapists), the number of linear accelerators and the implementation of advanced radiotherapy technologies from the Center for Cancer Control and Information Services of the National Cancer Center, Japan. Only 53% prefectural designated cancer care hospitals and 16% regional designated cancer care hospitals have implemented intensity-modulated radiotherapy for head and neck cancers, and 62% prefectural designated cancer care hospitals and 23% regional designated cancer care hospitals use intensity-modulated radiotherapy for prostate cancer. Seventy-four percent prefectural designated cancer care hospitals and 40% regional designated cancer care hospitals employ stereotactic body radiotherapy for lung cancer. Our multivariate analysis of prefectural designated cancer care hospitals which satisfy the institute's qualifications for advanced technologies revealed the number of radiation oncologists (P=0.01) and that of radiation therapists (P=0.003) were significantly correlated with the implementation of intensity-modulated radiotherapy for prostate cancer, and the number of radiation oncologists (P=0.02) was correlated with the implementation of stereotactic body radiotherapy. There was a trend to correlate the number of medical physicists with the implementation of stereotactic body radiotherapy (P=0.07). Only 175 (51%) regional designated cancer care hospitals satisfy the institute's qualification of stereotactic body radiotherapy and 76 (22%) satisfy that of intensity-modulated radiotherapy. Seventeen percent prefectural designated cancer care hospitals and 13% regional designated cancer care hospitals

  7. Tools for Real-Time Control Systems Co-Design - A Survey

    OpenAIRE

    Henriksson, Dan; El-Khoury, Jad; Årzén, Karl-Erik; Törngren, Martin; Redell, Ola

    2005-01-01

    This report presents a survey of current simulation tools in the area of integrated control and real-time systems design. Each tool is presented with a quick overview followed by a more detailed section describing comparative aspects of the tool. These aspects describe the context and purpose of the tool (scenarios, development stages, activities, and qualities/constraints being addressed) and the actual tool technology (tool architecture, inputs, outputs, modeling content, extensibility and ...

  8. Robotic influence in the conceptual design of mechanical systems in space and vice versa - A survey

    Science.gov (United States)

    Sanger, George F.

    1988-01-01

    A survey of methods using robotic devices to construct structural elements in space is presented. Two approaches to robotic construction are considered: one in which the structural elements are designed using conventional aerospace techniques which tend to constrain the function aspects of robotics and one in which the structural elements are designed from the conceptual stage with built-in robotic features. Examples are presented of structural building concepts using robotics, including the construction of the SP-100 nuclear reactor power system, a multimirror large aperture IR space telescope concept, retrieval and repair in space, and the Flight Telerobotic Servicer.

  9. Trajectory Design to Mitigate Risk on the Transiting Exoplanet Survey Satellite (TESS) Mission

    Science.gov (United States)

    Dichmann, Donald

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will employ a highly eccentric Earth orbit, in 2:1 lunar resonance, reached with a lunar flyby preceded by 3.5 phasing loops. The TESS mission has limited propellant and several orbit constraints. Based on analysis and simulation, we have designed the phasing loops to reduce delta-V and to mitigate risk due to maneuver execution errors. We have automated the trajectory design process and use distributed processing to generate and to optimize nominal trajectories, check constraint satisfaction, and finally model the effects of maneuver errors to identify trajectories that best meet the mission requirements.

  10. Structure analysis of designated hospitals for cancer control in Japan from JASTRO census survey database 2005

    International Nuclear Information System (INIS)

    Ikeda, Hiroshi; Kagami, Yoshikazu; Nishio, Masamichi; Kataoka, Masaaki; Matsumoto, Yasuo; Hatano, Kazuo; Ogino, Takashi

    2008-01-01

    The structures of 288 hospitals designated for cancer control and approved by Ministry of Health, Labour and Welfare in February 2006 were analyzed from radiotherapy aspects according to the Japanese Society for Therapeutic Radiology and Oncology (JASTRO) 2005 census survey data. The data were compiled from 266 hospitals. Overall 78,086 new patients were treated at these designated hospitals, which accounts for just a half the total number of patients in Japan. The structure of radiotherapy (RT) must be essential for cancer management, and our study showed the designated hospitals are insufficient in the RT requirement. No RT equipment is installed in 14 hospitals. Of 266, 109 hospitals treated less than 200 new patients, and 25 hospitals less than 100 in 2005. The data analysis revealed that academic hospitals, JACC hospitals and others are reasonable in terms of structures and capacity of radiotherapy. Moreover, both academic and JACC hospitals play similar roles to designated prefectural hospitals in cancer management by radiotherapy. (author)

  11. On a Modular Approach to the Design of Integrated Social Surveys

    Directory of Open Access Journals (Sweden)

    Ioannidis Evangelos

    2016-06-01

    Full Text Available This article considers a modular approach to the design of integrated social surveys. The approach consists of grouping variables into ‘modules’, each of which is then allocated to one or more ‘instruments’. Each instrument is then administered to a random sample of population units, and each sample unit responds to all modules of the instrument. This approach offers a way of designing a system of integrated social surveys that balances the need to limit the cost and the need to obtain sufficient information. The allocation of the modules to instruments draws on the methodology of split questionnaire designs. The composition of the instruments, that is, how the modules are allocated to instruments, and the corresponding sample sizes are obtained as a solution to an optimisation problem. This optimisation involves minimisation of respondent burden and data collection cost, while respecting certain design constraints usually encountered in practice. These constraints may include, for example, the level of precision required and dependencies between the variables. We propose using a random search algorithm to find approximate optimal solutions to this problem. The algorithm is proved to fulfil conditions that ensure convergence to the global optimum and can also produce an efficient design for a split questionnaire.

  12. Japanese structure survey of radiation oncology in 2007 with special reference to designated cancer care hospitals

    International Nuclear Information System (INIS)

    Numasaki, Hodaka; Shibuya, Hitoshi; Nishio, Masamichi

    2011-01-01

    Background and Purpose: The structure of radiation oncology in designated cancer care hospitals in Japan was investigated in terms of equipment, personnel, patient load, and geographic distribution. The effect of changes in the health care policy in Japan on radiotherapy structure was also examined. Material and Methods: The Japanese Society of Therapeutic Radiology and Oncology surveyed the national structure of radiation oncology in 2007. The structures of 349 designated cancer care hospitals and 372 other radiotherapy facilities were compared. Results: Respective findings for equipment and personnel at designated cancer care hospitals and other facilities included the following: linear accelerators/facility: 1.3 and 1.0; annual patients/linear accelerator: 296.5 and 175.0; and annual patient load/full-time equivalent radiation oncologist was 237.0 and 273.3, respectively. Geographically, the number of designated cancer care hospitals was associated with population size. Conclusion: The structure of radiation oncology in Japan in terms of equipment, especially for designated cancer care hospitals, was as mature as that in European countries and the United States, even though the medical costs in relation to GDP in Japan are lower. There is still a shortage of manpower. The survey data proved to be important to fully understand the radiation oncology medical care system in Japan. (orig.)

  13. Survey on Cooled-Vessel Designs in High Temperature Gas-Cooled Reactors

    International Nuclear Information System (INIS)

    Kim, Min-Hwan; Lee, Won-Jae

    2006-01-01

    The core outlet temperature of the coolant in the high temperature gas-cooled reactors (HTGR) has been increased to improve the overall efficiency of their electricity generation by using the Brayton cycle or their nuclear hydrogen production by using thermo-chemical processes. The increase of the outlet temperature accompanies an increase of the coolant inlet temperature. A high coolant inlet temperature results in an increase of the reactor pressure vessel (RPV) operation temperature. The conventional steels, proven vessel material in light water reactors, cannot be used as materials for the RPV in the elevated temperatures which necessitate its design to account for the creep effects. Some ferritic or martensitic steels like 2 1/4Cr-1Mo and 9Cr-1Mo-V are very well established creep resistant materials for a temperature range of 400 to 550 C. Although these materials have been used in a chemical plant, there is limited experience with using these materials in nuclear reactors. Even though the 2 1/4Cr-1Mo steel was used to manufacture the RPV for HTR-10 of Japan Atomic Energy Agency(JAEA), a large RPV has not been manufactured by using this material or 9Cr-1Mo-V steel. Due to not only its difficulties in manufacturing but also its high cost, the JAEA determined that they would exclude these materials from the GTHTR design. For the above reasons, KAERI has been considering a cooled-vessel design as an option for the RPV design of a NHDD plant (Nuclear Hydrogen Development and Demonstration). In this study, we surveyed several HTGRs, which adopt the cooled-vessel concept for their RPV design, and discussed their design characteristics. The survey results in design considerations for the NHDD cooled-vessel design

  14. Survey of customer expectation and satisfaction: preliminary research of a modular product design approach for sheep cage design

    Directory of Open Access Journals (Sweden)

    Rochman Yuli Agusti

    2018-01-01

    Full Text Available This study aims to produce a modular sheep cage design. Feeding, maintenance and integrated waste management are taking into account in the design. The modular and integrated product design provides advantages such as (1 easy way of making and modifying the product, (2 enabling the utilization of existing facilities such as shade, (3 giving the user a sense of convenience as the waste can be processed and not being a source of pollution. The Modular Quality Function Deployment (QFD method is applied to identify modules associated with the customer needs of the product. A survey about customer expectation and satisfaction was conducted in order to evaluate the gap of both. The highest value of gap between customer expectation and satisfaction of products indicates that the customer needs are the focus of the problems. The most important customer needs are considered in modification and improvement of design. These are (1 the cage is not easy to fall down, (2 the sheep cage can last for long time, (3 it uses a strong frame, (4 the roof section materials is not easy to leak, and (5 It can be used even if one part of the cage is damaged.

  15. Variation in choice of study design: findings from the Epidemiology Design Decision Inventory and Evaluation (EDDIE) survey.

    Science.gov (United States)

    Stang, Paul E; Ryan, Patrick B; Overhage, J Marc; Schuemie, Martijn J; Hartzema, Abraham G; Welebob, Emily

    2013-10-01

    Researchers using observational data to understand drug effects must make a number of analytic design choices that suit the characteristics of the data and the subject of the study. Review of the published literature suggests that there is a lack of consistency even when addressing the same research question in the same database. To characterize the degree of similarity or difference in the method and analysis choices made by observational database research experts when presented with research study scenarios. On-line survey using research scenarios on drug-effect studies to capture method selection and analysis choices that follow a dependency branching based on response to key questions. Voluntary participants experienced in epidemiological study design solicited for participation through registration on the Observational Medical Outcomes Partnership website, membership in particular professional organizations, or links in relevant newsletters. Description (proportion) of respondents selecting particular methods and making specific analysis choices based on individual drug-outcome scenario pairs. The number of questions/decisions differed based on stem questions of study design, time-at-risk, outcome definition, and comparator. There is little consistency across scenarios, by drug or by outcome of interest, in the decisions made for design and analyses in scenarios using large healthcare databases. The most consistent choice was the cohort study design but variability in the other critical decisions was common. There is great variation among epidemiologists in the design and analytical choices that they make when implementing analyses in observational healthcare databases. These findings confirm that it will be important to generate empiric evidence to inform these decisions and to promote a better understanding of the impact of standardization on research implementation.

  16. The Influence of the Design of Web Survey Questionnaires on the Quality of Responses

    Directory of Open Access Journals (Sweden)

    Stéphane Ganassali

    2008-03-01

    Full Text Available he first objective of this article is to propose a conceptual framework of the effects of on-line questionnaire design on the quality of collected responses. Secondly, we present the results of an experiment where different protocols have been tested and compared in a randomised design using the basis of several quality indexes. Starting from some previous categorizations, and from the main factors identified in the literature, we first propose an initial global framework of the questionnaire and question characteristics in a web survey, divided into five groups of factors. Our framework was built to follow the response process successive stages of the contact between the respondent and the questionnaire itself. Then, because it has been studied in the survey methodology literature in a very restricted way, the concept of `response quality' is discussed and extended with some more `qualitative' criteria that could be helpful for researchers and practitioners, in order to obtain a deeper assessment of the survey output. As an experiment, on the basis of the factors chosen as major characteristics of the questionnaire design, eight versions of a questionnaire related to young people's consumption patterns were created. The links to these on-line questionnaires were sent in November 2005 to a target of 10,000 young people. The article finally presents the results of our study and discusses the conclusions. Very interesting results come to light; especially regarding the influence of length, interaction and question wording dimensions on response quality. We discuss the effects of Web-questionnaire design characteristics on the quality of data.

  17. Literature survey, numerical examples, and recommended design studies for main-coolant pumps. Final report

    International Nuclear Information System (INIS)

    Allaire, P.E.; Barrett, L.E.

    1982-06-01

    This report presents an up-to-date literature survey, examples of calculations of seal forces or other pump properties, and recommendations for future work pertaining to primary coolant pumps and primary recirculating pumps in the nuclear power industry. Five main areas are covered: pump impeller forces, fluid annuli, bearings, seals, and rotor calculations. The main conclusion is that forces in pump impellers is perhaps the least well understood area, seals have had some good design work done on them recently, fluid annuli effects are being discussed in the literature, bearing designs are fairly well known, and rotor calculations have been discussed widely in the literature. It should be noted, however, that usually the literature in a given area is not applied to pumps in nuclear power stations. The most immediate need for a combined theoretical and experimental design capability exists in mechanical face seals

  18. Equity in Microscale Urban Design and Walkability: A Photographic Survey of Six Pittsburgh Streetscapes

    Directory of Open Access Journals (Sweden)

    Bradley Bereitschaft

    2017-07-01

    Full Text Available This paper explores inequity in neighborhood walkability at the micro-scale level by qualitatively examining six streetscapes in Pittsburgh, Pennsylvania. A photographic survey is used to highlight differences in the quality and design of the built environment among pairs of streetscapes with high or low social vulnerability but approximately equal quantitative Walk Scores®. The survey revealed discernable differences in the quality and maintenance of the built environment among those in more and less disadvantaged neighborhoods. This was true of several characteristics expected to affect walkability, including enclosure, transparency, complexity, and tidiness. Streetscapes in neighborhoods with high social vulnerability exhibited less contiguous street walls, fewer windows and less transparent storefronts, less well maintained infrastructure, fewer street cafés, and overall less complexity than those in neighborhoods with low social vulnerability. Implications for planning and policy are discussed.

  19. [Design and implementation of mobile terminal data acquisition for Chinese materia medica resources survey].

    Science.gov (United States)

    Qi, Yuan-Hua; Wang, Hui; Zhang, Xiao-Bo; Jin, Yan; Ge, Xiao-Guang; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    In this paper, a data acquisition system based on mobile terminal combining GPS, offset correction, automatic speech recognition and database networking technology was designed implemented with the function of locating the latitude and elevation information fast, taking conveniently various types of Chinese herbal plant photos, photos, samples habitat photos and so on. The mobile system realizes automatic association with Chinese medicine source information, through the voice recognition function it records the information of plant characteristics and environmental characteristics, and record relevant plant specimen information. The data processing platform based on Chinese medicine resources survey data reporting client can effectively assists in indoor data processing, derives the mobile terminal data to computer terminal. The established data acquisition system provides strong technical support for the fourth national survey of the Chinese materia medica resources (CMMR). Copyright© by the Chinese Pharmaceutical Association.

  20. Design of the South East Asian Nutrition Survey (SEANUTS): a four-country multistage cluster design study.

    Science.gov (United States)

    Schaafsma, Anne; Deurenberg, Paul; Calame, Wim; van den Heuvel, Ellen G H M; van Beusekom, Christien; Hautvast, Jo; Sandjaja; Bee Koon, Poh; Rojroongwasinkul, Nipa; Le Nguyen, Bao Khanh; Parikh, Panam; Khouw, Ilse

    2013-09-01

    Nutrition is a well-known factor in the growth, health and development of children. It is also acknowledged that worldwide many people have dietary imbalances resulting in over- or undernutrition. In 2009, the multinational food company FrieslandCampina initiated the South East Asian Nutrition Survey (SEANUTS), a combination of surveys carried out in Indonesia, Malaysia, Thailand and Vietnam, to get a better insight into these imbalances. The present study describes the general study design and methodology, as well as some problems and pitfalls encountered. In each of these countries, participants in the age range of 0·5-12 years were recruited according to a multistage cluster randomised or stratified random sampling methodology. Field teams took care of recruitment and data collection. For the health status of children, growth and body composition, physical activity, bone density, and development and cognition were measured. For nutrition, food intake and food habits were assessed by questionnaires, whereas in subpopulations blood and urine samples were collected to measure the biochemical status parameters of Fe, vitamins A and D, and DHA. In Thailand, the researchers additionally studied the lipid profile in blood, whereas in Indonesia iodine excretion in urine was analysed. Biochemical data were analysed in certified laboratories. Study protocols and methodology were aligned where practically possible. In December 2011, data collection was finalised. In total, 16,744 children participated in the present study. Information that will be very relevant for formulating nutritional health policies, as well as for designing innovative food and nutrition research and development programmes, has become available.

  1. Sampling effects on the identification of roadkill hotspots: Implications for survey design.

    Science.gov (United States)

    Santos, Sara M; Marques, J Tiago; Lourenço, André; Medinas, Denis; Barbosa, A Márcia; Beja, Pedro; Mira, António

    2015-10-01

    Although locating wildlife roadkill hotspots is essential to mitigate road impacts, the influence of study design on hotspot identification remains uncertain. We evaluated how sampling frequency affects the accuracy of hotspot identification, using a dataset of vertebrate roadkills (n = 4427) recorded over a year of daily surveys along 37 km of roads. "True" hotspots were identified using this baseline dataset, as the 500-m segments where the number of road-killed vertebrates exceeded the upper 95% confidence limit of the mean, assuming a Poisson distribution of road-kills per segment. "Estimated" hotspots were identified likewise, using datasets representing progressively lower sampling frequencies, which were produced by extracting data from the baseline dataset at appropriate time intervals (1-30 days). Overall, 24.3% of segments were "true" hotspots, concentrating 40.4% of roadkills. For different groups, "true" hotspots accounted from 6.8% (bats) to 29.7% (small birds) of road segments, concentrating from 60% (lizards, lagomorphs, carnivores) of roadkills. Spatial congruence between "true" and "estimated" hotspots declined rapidly with increasing time interval between surveys, due primarily to increasing false negatives (i.e., missing "true" hotspots). There were also false positives (i.e., wrong "estimated" hotspots), particularly at low sampling frequencies. Spatial accuracy decay with increasing time interval between surveys was higher for smaller-bodied (amphibians, reptiles, small birds, small mammals) than for larger-bodied species (birds of prey, hedgehogs, lagomorphs, carnivores). Results suggest that widely used surveys at weekly or longer intervals may produce poor estimates of roadkill hotspots, particularly for small-bodied species. Surveying daily or at two-day intervals may be required to achieve high accuracy in hotspot identification for multiple species. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Optimal sampling designs for large-scale fishery sample surveys in Greece

    Directory of Open Access Journals (Sweden)

    G. BAZIGOS

    2007-12-01

    The paper deals with the optimization of the following three large scale sample surveys: biological sample survey of commercial landings (BSCL, experimental fishing sample survey (EFSS, and commercial landings and effort sample survey (CLES.

  3. Survey of injury sources for a trampoline with equipment hazards designed out.

    Science.gov (United States)

    Eager, David; Scarrott, Carl; Nixon, Jim; Alexander, Keith

    2012-07-01

    In Australia, trampolines contribute approximately one-quarter of all childhood play-equipment injuries. The purpose of this study was to gather and evaluate injury data from a nontraditional, 'soft-edged', consumer trampoline in which the equipment injury sources have been designed out. A survey was undertaken in Queensland and New South Wales. The manufacturer of the nontraditional trampoline provided the University of Technology, Sydney, with their Australian customer database. Injury data were gathered in a pilot study by phone interview, then in a full study through an email survey. Results from 3817 respondents were compared with earlier Australian and US data from traditional trampolines gathered from emergency departments.   A significantly lower proportion of the injuries caused by falling off or striking the equipment was found for this new design when compared with traditional trampolines both in Australia and in the USA. The age of children being injured on trampolines in Australia was found to be markedly lower than in North America. This research indicates that with appropriate design the more severe injuries on traditional trampolines can be significantly reduced. © 2012 The Authors. Journal of Paediatrics and Child Health © 2012 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

  4. Injury survey of a non-traditional 'soft-edged' trampoline designed to lower equipment hazards.

    Science.gov (United States)

    Eager, David B; Scarrott, Carl; Nixon, Jim; Alexander, Keith

    2013-01-01

    In Australia trampolines contribute one quarter of all childhood play equipment injuries. The objective of this study was to gather and evaluate injury data from a non-traditional, 'soft-edged', consumer trampoline, where the design aimed to minimise injuries from the equipment and from falling off. The manufacturer of the non-traditional trampoline provided the University of Technology Sydney with their Australian customer database. The study involved surveys in Queensland and New South Wales, between May 2007 and March 2010. Initially injury data was gathered by a phone interview pilot study, then in the full study, through an email survey. The 3817 respondents were the carers of child users of the 'soft-edge' trampolines. Responses were compared with Australian and US emergency department data. In both countries the proportion of injuries caused by the equipment and falling off was compared with the proportion caused by the jumpers to themselves or each other. The comparisons showed a significantly lower proportion resulted from falling-off or hitting the equipment for this design when compared to traditional trampolines, both in Australia and the US. This research concludes that equipment-induced and falling-off injuries, the more severe injuries on traditional trampolines, can be significantly reduced with appropriate trampoline design.

  5. Designing, Testing, and Validating an Attitudinal Survey on an Environmental Topic: A Groundwater Pollution Survey Instrument for Secondary School Students

    Science.gov (United States)

    Lacosta-Gabari, Idoya; Fernandez-Manzanal, Rosario; Sanchez-Gonzalez, Dolores

    2009-01-01

    Research in environmental attitudes' assessment has significantly increased in recent years. The development of specific attitude scales for specific environmental problems has often been proposed. This paper describes the Groundwater Pollution Test (GPT), a 19-item survey instrument using a Likert-type scale. The survey has been used with…

  6. Requirements and concept design for large earth survey telescope for SEOS

    Science.gov (United States)

    Mailhot, P.; Bisbee, J.

    1975-01-01

    The efforts of a one year program of Requirements Analysis and Conceptual Design for the Large Earth Survey Telescope for the Synchronous Earth Observatory Satellite is summarized. A 1.4 meter aperture Cassegrain telescope with 0.6 deg field of view is shown to do an excellent job in satisfying the observational requirements for a wide range of earth resources and meteorological applications. The telescope provides imagery or thermal mapping in ten spectral bands at one time in a field sharing grouping of linear detector arrays. Pushbroom scanning is accomplished by spacecraft slew.

  7. Questionnaire survey of customer satisfaction for product categories towards certification of ergonomic quality in design.

    Science.gov (United States)

    Mochimaru, Masaaki; Takahashi, Miwako; Hatakenaka, Nobuko; Horiuchi, Hitoshi

    2012-01-01

    Customer satisfaction was surveyed for 6 product categories (consumer electronics, daily commodities, home equipment, information systems, cars, and health appliances) by questionnaires based on the Analytic Hierarchy Process. Analyzing weight of evaluation factors, the 6 product categories were reorganized into 4 categories, those were related to 4 aspects in daily living that formed by two axes: home living - mobility life and healthy life - active communication. It was found that consumers were attracted by the actual user test by public institutes for all product categories. The certification based on the design process standard established by authorities, such as EQUID was the second best attractor for consumers.

  8. Recommended survey designs for occupancy modelling using motion-activated cameras: insights from empirical wildlife data

    Directory of Open Access Journals (Sweden)

    Graeme Shannon

    2014-08-01

    Full Text Available Motion-activated cameras are a versatile tool that wildlife biologists can use for sampling wild animal populations to estimate species occurrence. Occupancy modelling provides a flexible framework for the analysis of these data; explicitly recognizing that given a species occupies an area the probability of detecting it is often less than one. Despite the number of studies using camera data in an occupancy framework, there is only limited guidance from the scientific literature about survey design trade-offs when using motion-activated cameras. A fuller understanding of these trade-offs will allow researchers to maximise available resources and determine whether the objectives of a monitoring program or research study are achievable. We use an empirical dataset collected from 40 cameras deployed across 160 km2 of the Western Slope of Colorado, USA to explore how survey effort (number of cameras deployed and the length of sampling period affects the accuracy and precision (i.e., error of the occupancy estimate for ten mammal and three virtual species. We do this using a simulation approach where species occupancy and detection parameters were informed by empirical data from motion-activated cameras. A total of 54 survey designs were considered by varying combinations of sites (10–120 cameras and occasions (20–120 survey days. Our findings demonstrate that increasing total sampling effort generally decreases error associated with the occupancy estimate, but changing the number of sites or sampling duration can have very different results, depending on whether a species is spatially common or rare (occupancy = ψ and easy or hard to detect when available (detection probability = p. For rare species with a low probability of detection (i.e., raccoon and spotted skunk the required survey effort includes maximizing the number of sites and the number of survey days, often to a level that may be logistically unrealistic for many studies. For common

  9. A Survey of a System of Methods for Fire Safety Design of Traditional Concrete Constructions

    DEFF Research Database (Denmark)

    Hertz, Kristian

    2000-01-01

    constructions DS411. And the bases for many of the methods have been distributed by CIB W14 reports. But a survey of all the methods in coherence has never been presented, and much of this documentation and the additional documentation produced for the work with the codes needs still to be printed in papers......During the years since 1978 the author has been developing a series of calculation methods and sup-porting test methods for the fire safety design of concrete constructions. The basic methods have been adopted in the fire chapters of the Eurocode ENV1992-1-2 and the Danish code for concrete.......It is the aim of this paper to give a coherent presentation of the design methods, their degree of documentation and the available references in order to facilitate the application of them....

  10. Trajectory Design Enhancements to Mitigate Risk for the Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Dichmann, Donald; Parker, Joel; Nickel, Craig; Lutz, Stephen

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will employ a highly eccentric Earth orbit, in 2:1 lunar resonance, which will be reached with a lunar flyby preceded by 3.5 phasing loops. The TESS mission has limited propellant and several constraints on the science orbit and on the phasing loops. Based on analysis and simulation, we have designed the phasing loops to reduce delta-V (DV) and to mitigate risk due to maneuver execution errors. We have automated the trajectory design process and use distributed processing to generate and optimal nominal trajectories; to check constraint satisfaction; and finally to model the effects of maneuver errors to identify trajectories that best meet the mission requirements.

  11. Workshop Synthesis: Stated Preference Surveys and Experimental Design, an Audit of the Journey so far and Future Research Perspectives

    DEFF Research Database (Denmark)

    Cherchi, Elisabetta; Hensher, David A.

    2015-01-01

    This paper is a synthesis of the discussions and ideas that were generated during the workshop on “Stated preference surveys and experimental design” at the 2014 Travel Survey Methods Conference in Leura (Australia). The workshop addressed the challenges related to the design and implementation o...

  12. THE DEEP2 GALAXY REDSHIFT SURVEY: DESIGN, OBSERVATIONS, DATA REDUCTION, AND REDSHIFTS

    International Nuclear Information System (INIS)

    Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Harker, Justin J.; Lai, Kamson; Coil, Alison L.; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan Renbin; Kassin, Susan A.; Konidaris, N. P.

    2013-01-01

    We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ∼ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M B = –20 at z ∼ 1 via ∼90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg 2 divided into four separate fields observed to a limiting apparent magnitude of R AB = 24.1. Objects with z ∼ 0.7 to be targeted ∼2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z ∼ 1.45, where the [O II] 3727 Å doublet lies in the infrared. The DEIMOS 1200 line mm –1 grating used for the survey delivers high spectral resolution (R ∼ 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift errors and catastrophic failure rates are assessed through more than 2000 objects with duplicate

  13. Factors controlling volume errors through 2D gully erosion assessment: guidelines for optimal survey design

    Science.gov (United States)

    Castillo, Carlos; Pérez, Rafael

    2017-04-01

    The assessment of gully erosion volumes is essential for the quantification of soil losses derived from this relevant degradation process. Traditionally, 2D and 3D approaches has been applied for this purpose (Casalí et al., 2006). Although innovative 3D approaches have recently been proposed for gully volume quantification, a renewed interest can be found in literature regarding the useful information that cross-section analysis still provides in gully erosion research. Moreover, the application of methods based on 2D approaches can be the most cost-effective approach in many situations such as preliminary studies with low accuracy requirements or surveys under time or budget constraints. The main aim of this work is to examine the key factors controlling volume error variability in 2D gully assessment by means of a stochastic experiment involving a Monte Carlo analysis over synthetic gully profiles in order to 1) contribute to a better understanding of the drivers and magnitude of gully erosion 2D-surveys uncertainty and 2) provide guidelines for optimal survey designs. Owing to the stochastic properties of error generation in 2D volume assessment, a statistical approach was followed to generate a large and significant set of gully reach configurations to evaluate quantitatively the influence of the main factors controlling the uncertainty of the volume assessment. For this purpose, a simulation algorithm in Matlab® code was written, involving the following stages: - Generation of synthetic gully area profiles with different degrees of complexity (characterized by the cross-section variability) - Simulation of field measurements characterised by a survey intensity and the precision of the measurement method - Quantification of the volume error uncertainty as a function of the key factors In this communication we will present the relationships between volume error and the studied factors and propose guidelines for 2D field surveys based on the minimal survey

  14. The Foundation Supernova Survey: motivation, design, implementation, and first data release

    Science.gov (United States)

    Foley, Ryan J.; Scolnic, Daniel; Rest, Armin; Jha, S. W.; Pan, Y.-C.; Riess, A. G.; Challis, P.; Chambers, K. C.; Coulter, D. A.; Dettman, K. G.; Foley, M. M.; Fox, O. D.; Huber, M. E.; Jones, D. O.; Kilpatrick, C. D.; Kirshner, R. P.; Schultz, A. S. B.; Siebert, M. R.; Flewelling, H. A.; Gibson, B.; Magnier, E. A.; Miller, J. A.; Primak, N.; Smartt, S. J.; Smith, K. W.; Wainscoat, R. J.; Waters, C.; Willman, M.

    2018-03-01

    The Foundation Supernova Survey aims to provide a large, high-fidelity, homogeneous, and precisely calibrated low-redshift Type Ia supernova (SN Ia) sample for cosmology. The calibration of the current low-redshift SN sample is the largest component of systematic uncertainties for SN cosmology, and new data are necessary to make progress. We present the motivation, survey design, observation strategy, implementation, and first results for the Foundation Supernova Survey. We are using the Pan-STARRS telescope to obtain photometry for up to 800 SNe Ia at z ≲ 0.1. This strategy has several unique advantages: (1) the Pan-STARRS system is a superbly calibrated telescopic system, (2) Pan-STARRS has observed 3/4 of the sky in grizyP1 making future template observations unnecessary, (3) we have a well-tested data-reduction pipeline, and (4) we have observed ˜3000 high-redshift SNe Ia on this system. Here, we present our initial sample of 225 SN Ia grizP1 light curves, of which 180 pass all criteria for inclusion in a cosmological sample. The Foundation Supernova Survey already contains more cosmologically useful SNe Ia than all other published low-redshift SN Ia samples combined. We expect that the systematic uncertainties for the Foundation Supernova Sample will be two to three times smaller than other low-redshift samples. We find that our cosmologically useful sample has an intrinsic scatter of 0.111 mag, smaller than other low-redshift samples. We perform detailed simulations showing that simply replacing the current low-redshift SN Ia sample with an equally sized Foundation sample will improve the precision on the dark energy equation-of-state parameter by 35 per cent, and the dark energy figure of merit by 72 per cent.

  15. Importance of Survey Design for Studying the Epidemiology of Emerging Tobacco Product Use Among Youth.

    Science.gov (United States)

    Delnevo, Cristine D; Gundersen, Daniel A; Manderski, Michelle T B; Giovenco, Daniel P; Giovino, Gary A

    2017-08-15

    Accurate surveillance is critical for monitoring the epidemiology of emerging tobacco products in the United States, and survey science suggests that survey response format can impact prevalence estimates. We utilized data from the 2014 New Jersey Youth Tobacco Survey (n = 3,909) to compare estimates of the prevalence of 4 behaviors (ever hookah use, current hookah use, ever e-cigarette use, and current e-cigarette use) among New Jersey high school students, as assessed using "check-all-that-apply" questions, with estimates measured by means of "forced-choice" questions. Measurement discrepancies were apparent for all 4 outcomes, with the forced-choice questions yielding prevalence estimates approximately twice those of the check-all-that-apply questions, and agreement was fair to moderate. The sensitivity of the check-all-that-apply questions, treating the forced-choice format as the "gold standard," ranged from 38.1% (current hookah use) to 58.3% (ever e-cigarette use), indicating substantial false-negative rates. These findings highlight the impact of question response format on prevalence estimates of emerging tobacco products among youth and suggest that estimates generated by means of check-all-that-apply questions may be biased downward. Alternative survey designs should be considered to avoid check-all-that-apply response formats, and researchers should use caution when interpreting tobacco use data obtained from check-all-that-apply formats. © The Author(s) 2017. Published by Oxford University Press on behalf of the Johns Hopkins Bloomberg School of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. Dealing with trade-offs in destructive sampling designs for occupancy surveys.

    Directory of Open Access Journals (Sweden)

    Stefano Canessa

    Full Text Available Occupancy surveys should be designed to minimise false absences. This is commonly achieved by increasing replication or increasing the efficiency of surveys. In the case of destructive sampling designs, in which searches of individual microhabitats represent the repeat surveys, minimising false absences leads to an inherent trade-off. Surveyors can sample more low quality microhabitats, bearing the resultant financial costs and producing wider-spread impacts, or they can target high quality microhabitats were the focal species is more likely to be found and risk more severe impacts on local habitat quality. We show how this trade-off can be solved with a decision-theoretic approach, using the Millewa Skink Hemiergis millewae from southern Australia as a case study. Hemiergis millewae is an endangered reptile that is best detected using destructive sampling of grass hummocks. Within sites that were known to be occupied by H. millewae, logistic regression modelling revealed that lizards were more frequently detected in large hummocks. If this model is an accurate representation of the detection process, searching large hummocks is more efficient and requires less replication, but this strategy also entails destruction of the best microhabitats for the species. We developed an optimisation tool to calculate the minimum combination of the number and size of hummocks to search to achieve a given cumulative probability of detecting the species at a site, incorporating weights to reflect the sensitivity of the results to a surveyor's priorities. The optimisation showed that placing high weight on minimising volume necessitates impractical replication, whereas placing high weight on minimising replication requires searching very large hummocks which are less common and may be vital for H. millewae. While destructive sampling methods are sometimes necessary, surveyors must be conscious of the ecological impacts of these methods. This study provides a

  17. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design.

  18. A survey on the human reliability analysis methods for the design of Korean next generation reactor

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, J. W.; Park, J. C.; Kwack, H. Y.; Lee, K. Y.; Park, J. K.; Kim, I. S.; Jung, K. W.

    2000-03-01

    Enhanced features through applying recent domestic technologies may characterize the safety and efficiency of KNGR(Korea Next Generation Reactor). Human engineered interface and control room environment are expected to be beneficial to the human aspects of KNGR design. However, since the current method for human reliability analysis is not up to date after THERP/SHARP, it becomes hard to assess the potential of human errors due to both of the positive and negative effect of the design changes in KNGR. This is a state of the art report on the human reliability analysis methods that are potentially available for the application to the KNGR design. We surveyed every technical aspects of existing HRA methods, and compared them in order to obtain the requirements for the assessment of human error potentials within KNGR design. We categorized the more than 10 methods into the first and the second generation according to the suggestion of Dr. Hollnagel. THERP was revisited in detail. ATHEANA proposed by US NRC for an advanced design and CREAM proposed by Dr. Hollnagel were reviewed and compared. We conclude that the key requirements might include the enhancement in the early steps for human error identification and the quantification steps with considerations of more extended error shaping factors over PSFs(performance shaping factors). The utilization of the steps and approaches of ATHEANA and CREAM will be beneficial to the attainment of an appropriate HRA method for KNGR. However, the steps and data from THERP will be still maintained because of the continuity with previous PSA activities in KNGR design

  19. A Novel Simulation Technician Laboratory Design: Results of a Survey-Based Study.

    Science.gov (United States)

    Ahmed, Rami; Hughes, Patrick G; Friedl, Ed; Ortiz Figueroa, Fabiana; Cepeda Brito, Jose R; Frey, Jennifer; Birmingham, Lauren E; Atkinson, Steven Scott

    2016-03-16

    OBJECTIVE : The purpose of this study was to elicit feedback from simulation technicians prior to developing the first simulation technician-specific simulation laboratory in Akron, OH. Simulation technicians serve a vital role in simulation centers within hospitals/health centers around the world. The first simulation technician degree program in the US has been approved in Akron, OH. To satisfy the requirements of this program and to meet the needs of this special audience of learners, a customized simulation lab is essential. A web-based survey was circulated to simulation technicians prior to completion of the lab for the new program. The survey consisted of questions aimed at identifying structural and functional design elements of a novel simulation center for the training of simulation technicians. Quantitative methods were utilized to analyze data. Over 90% of technicians (n=65) think that a lab designed explicitly for the training of technicians is novel and beneficial. Approximately 75% of respondents think that the space provided appropriate audiovisual (AV) infrastructure and space to evaluate the ability of technicians to be independent. The respondents think that the lab needed more storage space, visualization space for a large number of students, and more space in the technical/repair area. CONCLUSIONS : A space designed for the training of simulation technicians was considered to be beneficial. This laboratory requires distinct space for technical repair, adequate bench space for the maintenance and repair of simulators, an appropriate AV infrastructure, and space to evaluate the ability of technicians to be independent.

  20. DESIGN AND PRACTICE ON METADATA SERVICE SYSTEM OF SURVEYING AND MAPPING RESULTS BASED ON GEONETWORK

    Directory of Open Access Journals (Sweden)

    Z. Zha

    2012-08-01

    Full Text Available Based on the analysis and research on the current geographic information sharing and metadata service,we design, develop and deploy a distributed metadata service system based on GeoNetwork covering more than 30 nodes in provincial units of China.. By identifying the advantages of GeoNetwork, we design a distributed metadata service system of national surveying and mapping results. It consists of 31 network nodes, a central node and a portal. Network nodes are the direct system metadata source, and are distributed arround the country. Each network node maintains a metadata service system, responsible for metadata uploading and management. The central node harvests metadata from network nodes using OGC CSW 2.0.2 standard interface. The portal shows all metadata in the central node, provides users with a variety of methods and interface for metadata search or querying. It also provides management capabilities on connecting the central node and the network nodes together. There are defects with GeoNetwork too. Accordingly, we made improvement and optimization on big-amount metadata uploading, synchronization and concurrent access. For metadata uploading and synchronization, by carefully analysis the database and index operation logs, we successfully avoid the performance bottlenecks. And with a batch operation and dynamic memory management solution, data throughput and system performance are significantly improved; For concurrent access, , through a request coding and results cache solution, query performance is greatly improved. To smoothly respond to huge concurrent requests, a web cluster solution is deployed. This paper also gives an experiment analysis and compares the system performance before and after improvement and optimization. Design and practical results have been applied in national metadata service system of surveying and mapping results. It proved that the improved GeoNetwork service architecture can effectively adaptive for

  1. Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Stevenson, J D

    1976-04-01

    Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria.

  2. Survey of extreme load design regulatory agency licensing requirements for nuclear power plants

    International Nuclear Information System (INIS)

    Stevenson, J.D.

    1976-01-01

    Since 1965, when extreme load requirements began to be considered explicitly in nuclear power plant design, there has been a gradual divergence in requirements imposed by national regulatory agencies. However, nuclear plant safety is an international problem because of the potential international effects of any postulated plant failure. For this reason this paper has been prepared in an attempt to highlight the differences in national criteria currently used in the extreme load design of nuclear plant facilities. No attempt has been made to evaluate the relative merit of the criteria established by the various national regulatory agencies. This paper presents the results of a recent survey made of national atomic energy regulatory agencies and major nuclear steam supply design agencies, which requested a summary of current licensing criteria associated with earthquake, extreme wind (tornado), flood, airplane crash and accident (pipe break) loads applicable within the various national jurisdictions. Also presented are a number of comparisons which are meant to illustrate the differences in national regulatory criteria. (Auth.)

  3. The Unique Optical Design of the CTI-II Survey Telescope

    Science.gov (United States)

    Ackermann, Mark R.; McGraw, J. T.; MacFarlane, M.

    2006-12-01

    The CCD/Transit Instrument with Innovative Instrumentation (CTI-II) is being developed for precision ground-based astrometric and photometric astronomical observations. The 1.8m telescope will be stationary, near-zenith pointing and will feature a CCD-mosaic array operated in time-delay and integrate (TDI) mode to image a continuous strip of the sky in five bands. The heart of the telescope is a Nasmyth-like bent-Cassegrain optical system optimized to produce near diffraction-limited images with near zero distortion over a circular1.42 deg field. The optical design includes an f/2.2 parabolic ULE primary with no central hole salvaged from the original CTI telescope and adds the requisite hyperbolic secondary, a folding flat and a highly innovative all-spherical, five lens corrector which includes three plano surfaces. The reflective and refractive portions of the design have been optimized as individual but interdependent systems so that the same reflective system can be used with slightly different refractive correctors. At present, two nearly identical corrector designs are being evaluated, one fabricated from BK-7 glass and the other of fused silica. The five lens corrector consists of an air-spaced triplet separated from follow-on air-spaced doublet. Either design produces 0.25 arcsecond images at 83% encircled energy with a maximum of 0.0005% distortion. The innovative five lens corrector design has been applied to other current and planned Cassegrain, RC and super RC optical systems requiring correctors. The basic five lens approach always results in improved performance compared to the original designs. In some cases, the improvement in image quality is small but includes substantial reductions in distortion. In other cases, the improvement in image quality is substantial. Because the CTI-II corrector is designed for a parabolic primary, it might be especially useful for liquid mirror telescopes. We describe and discuss the CTI-II optical design with respect

  4. Changes in depth occupied by Great Lakes lake whitefish populations and the influence of survey design

    Science.gov (United States)

    Rennie, Michael D.; Weidel, Brian C.; Claramunt, Randall M.; Dunlob, Erin S.

    2015-01-01

    Understanding fish habitat use is important in determining conditions that ultimately affect fish energetics, growth and reproduction. Great Lakes lake whitefish (Coregonus clupeaformis) have demonstrated dramatic changes in growth and life history traits since the appearance of dreissenid mussels in the Great Lakes, but the role of habitat occupancy in driving these changes is poorly understood. To better understand temporal changes in lake whitefish depth of capture (Dw), we compiled a database of fishery-independent surveys representing multiple populations across all five Laurentian Great Lakes. By demonstrating the importance of survey design in estimating Dw, we describe a novel method for detecting survey-based bias in Dw and removing potentially biased data. Using unbiased Dw estimates, we show clear differences in the pattern and timing of changes in lake whitefish Dw between our reference sites (Lake Superior) and those that have experienced significant benthic food web changes (lakes Michigan, Huron, Erie and Ontario). Lake whitefish Dw in Lake Superior tended to gradually shift to shallower waters, but changed rapidly in other locations coincident with dreissenid establishment and declines in Diporeia densities. Almost all lake whitefish populations that were exposed to dreissenids demonstrated deeper Dw following benthic food web change, though a subset of these populations subsequently shifted to more shallow depths. In some cases in lakes Huron and Ontario, shifts towards more shallow Dw are occurring well after documented Diporeia collapse, suggesting the role of other drivers such as habitat availability or reliance on alternative prey sources.

  5. A survey of diagnostic ultrasound within the physiotherapy profession for the design of future training tools

    International Nuclear Information System (INIS)

    McKiernan, Sharmaine; Chiarelli, Pauline; Warren-Forward, Helen

    2011-01-01

    The expansion of diagnostic ultrasound outside of the traditional radiology profession into the physiotherapy profession is occurring. The purpose of this study was to determine if physiotherapists are purchasing diagnostic ultrasound machines, receiving training in the modality and what imaging procedures they are performing. For the design of future training tools, also investigated were the methods of training that physiotherapists might find most beneficial and what content they deem necessary to be covered during such training for the use of diagnostic ultrasound for their profession. An e-mail invitation was sent to physiotherapists throughout Australian who were registered on two databases, asking them to complete a web based survey. The survey was comprised of 18 questions including open and closed items. The data was then categorised into themes in accordance with the purpose of the study. Of the respondents, 39% did not own a diagnostic ultrasound machine, 33% had access to a machine that was owned by their employer and 18% actually owned a machine themselves. Training in diagnostic ultrasound had been received by 61% of the respondents however for 67% of those who had been trained, this training had only lasted for several hours, not days or weeks. For future training in ultrasound the majority of respondents would prefer either a workshop or DVD to cover imaging anatomy, the use of machine controls and scanning the pelvic floor, abdominal muscles and shoulder. From this survey it can be concluded that physiotherapists have an interest in or are using diagnostic ultrasound in their practice. While some form of training is being provided, further training is considered necessary and wanted by the physiotherapists so training tools need to be developed.

  6. A survey of diagnostic ultrasound within the physiotherapy profession for the design of future training tools

    Energy Technology Data Exchange (ETDEWEB)

    McKiernan, Sharmaine, E-mail: sharmaine.mckiernan@newcastle.edu.a [School of Health Sciences, University of Newcastle, Callaghan, NSW (Australia); Chiarelli, Pauline; Warren-Forward, Helen [School of Health Sciences, University of Newcastle, Callaghan, NSW (Australia)

    2011-05-15

    The expansion of diagnostic ultrasound outside of the traditional radiology profession into the physiotherapy profession is occurring. The purpose of this study was to determine if physiotherapists are purchasing diagnostic ultrasound machines, receiving training in the modality and what imaging procedures they are performing. For the design of future training tools, also investigated were the methods of training that physiotherapists might find most beneficial and what content they deem necessary to be covered during such training for the use of diagnostic ultrasound for their profession. An e-mail invitation was sent to physiotherapists throughout Australian who were registered on two databases, asking them to complete a web based survey. The survey was comprised of 18 questions including open and closed items. The data was then categorised into themes in accordance with the purpose of the study. Of the respondents, 39% did not own a diagnostic ultrasound machine, 33% had access to a machine that was owned by their employer and 18% actually owned a machine themselves. Training in diagnostic ultrasound had been received by 61% of the respondents however for 67% of those who had been trained, this training had only lasted for several hours, not days or weeks. For future training in ultrasound the majority of respondents would prefer either a workshop or DVD to cover imaging anatomy, the use of machine controls and scanning the pelvic floor, abdominal muscles and shoulder. From this survey it can be concluded that physiotherapists have an interest in or are using diagnostic ultrasound in their practice. While some form of training is being provided, further training is considered necessary and wanted by the physiotherapists so training tools need to be developed.

  7. Pilates program design and health benefits for pregnant women: A practitioners' survey.

    Science.gov (United States)

    Mazzarino, Melissa; Kerr, Debra; Morris, Meg E

    2018-04-01

    Little is known about recommendations for safe and appropriate instruction of Pilates exercises to women during pregnancy. The aim of this study was to examine Pilates practitioners' perspectives regarding Pilates program design for pregnant women. We also sought to elucidate their views on the potential benefits, restrictions and contraindications on Pilates in pregnancy. A cross-sectional survey was performed. Pilates practitioners were invited to participate via email. Participants were surveyed about their experience and views on: screening processes in alignment with The American College of Obstetricians and Gynecologists (ACOG) (2002) guidelines; (ii) optimal exercise program features and (iii) physical and mental health benefits of Pilates for pregnant women. The survey was completed by 192 Pilates practitioners from a range of settings. Practitioners reported conducting formal screening (84%) for safety in pregnant women prior to commencing Pilates classes. Most did not routinely seek medical approval from the woman's general practitioner. Divergent views emerged regarding the safety and benefits of Pilates exercises in the supine position. Mixed opinions were also generated regarding the effects of spinal flexion exercises, single-leg stance exercises and breathing manoeuvres. There was little agreement on the optimal frequency or dosage of exercises. Views regarding absolute contraindications to exercise differed from The American College of Obstetricians and Gynecologists (ACOG) (2002) guidelines which cautioned about the dangers of persistent bleeding, premature labour, pre-eclampsia, placental praevia and incompetent cervix. The most frequent reported physical and psychological benefit of Pilates was improving pelvic floor strength (12%) and improved social wellbeing (23%). The study highlighted wide variations in practice for Pilates exercises with pregnant woman as well as low adherence to clinical practice guidelines. Further evidence is required to

  8. A survey of pulse shape options for a revised plastic ablator ignition design

    Energy Technology Data Exchange (ETDEWEB)

    Clark, D. S.; Milovich, J. L.; Hinkel, D. E.; Salmonson, J. D.; Peterson, J. L.; Berzak Hopkins, L. F.; Eder, D. C.; Haan, S. W.; Jones, O. S.; Marinak, M. M.; Robey, H. F.; Smalyuk, V. A.; Weber, C. R. [Lawrence Livermore National Laboratory Livermore, California 94550 (United States)

    2014-11-15

    Recent experimental results using the “high foot” pulse shape for inertial confinement fusion ignition experiments on the National Ignition Facility (NIF) [Moses et al., Phys. Plasmas 16, 041006 (2009)] have shown encouraging progress compared to earlier “low foot” experiments. These results strongly suggest that controlling ablation front instability growth can significantly improve implosion performance even in the presence of persistent, large, low-mode distortions. Simultaneously, hydrodynamic growth radiography experiments have confirmed that ablation front instability growth is being modeled fairly well in NIF experiments. It is timely then to combine these two results and ask how current ignition pulse shapes could be modified to improve one-dimensional implosion performance while maintaining the stability properties demonstrated with the high foot. This paper presents such a survey of pulse shapes intermediate between the low and high foot extremes in search of an intermediate foot optimum. Of the design space surveyed, it is found that a higher picket version of the low foot pulse shape shows the most promise for improved compression without loss of stability.

  9. SURVEY DESIGN FOR SPECTRAL ENERGY DISTRIBUTION FITTING: A FISHER MATRIX APPROACH

    International Nuclear Information System (INIS)

    Acquaviva, Viviana; Gawiser, Eric; Bickerton, Steven J.; Grogin, Norman A.; Guo Yicheng; Lee, Seong-Kook

    2012-01-01

    The spectral energy distribution (SED) of a galaxy contains information on the galaxy's physical properties, and multi-wavelength observations are needed in order to measure these properties via SED fitting. In planning these surveys, optimization of the resources is essential. The Fisher Matrix (FM) formalism can be used to quickly determine the best possible experimental setup to achieve the desired constraints on the SED-fitting parameters. However, because it relies on the assumption of a Gaussian likelihood function, it is in general less accurate than other slower techniques that reconstruct the probability distribution function (PDF) from the direct comparison between models and data. We compare the uncertainties on SED-fitting parameters predicted by the FM to the ones obtained using the more thorough PDF-fitting techniques. We use both simulated spectra and real data, and consider a large variety of target galaxies differing in redshift, mass, age, star formation history, dust content, and wavelength coverage. We find that the uncertainties reported by the two methods agree within a factor of two in the vast majority (∼90%) of cases. If the age determination is uncertain, the top-hat prior in age used in PDF fitting to prevent each galaxy from being older than the universe needs to be incorporated in the FM, at least approximately, before the two methods can be properly compared. We conclude that the FM is a useful tool for astronomical survey design.

  10. Hot rocket plume experiment - Survey and conceptual design. [of rhenium-iridium bipropellants

    Science.gov (United States)

    Millard, Jerry M.; Luan, Taylor W.; Dowdy, Mack W.

    1992-01-01

    Attention is given to a space-borne engine plume experiment study to fly an experiment which will both verify and quantify the reduced contamination from advanced rhenium-iridium earth-storable bipropellant rockets (hot rockets) and provide a correlation between high-fidelity, in-space measurements and theoretical plume and surface contamination models. The experiment conceptual design is based on survey results from plume and contamination technologists throughout the U.S. With respect to shuttle use, cursory investigations validate Hitchhiker availability and adaptability, adequate remote manipulator system (RMS) articulation and dynamic capability, acceptable RMS attachment capability, adequate power and telemetry capability, and adequate flight altitude and attitude/orbital capability.

  11. Subsurface Characterization using Geophysical Seismic Refraction Survey for Slope Stabilization Design with Soil Nailing

    Science.gov (United States)

    Ashraf Mohamad Ismail, Mohd; Ng, Soon Min; Hazreek Zainal Abidin, Mohd; Madun, Aziman

    2018-04-01

    The application of geophysical seismic refraction for slope stabilization design using soil nailing method was demonstrated in this study. The potential weak layer of the study area is first identify prior to determining the appropriate length and location of the soil nail. A total of 7 seismic refraction survey lines were conducted at the study area with standard procedures. The refraction data were then analyzed by using the Pickwin and Plotrefa computer software package to obtain the seismic velocity profiles distribution. These results were correlated with the complementary borehole data to interpret the subsurface profile of the study area. It has been identified that layer 1 to 3 is the potential weak zone susceptible to slope failure. Hence, soil nails should be installed to transfer the tensile load from the less stable layer 3 to the more stable layer 4. The soil-nail interaction will provide a reinforcing action to the soil mass thereby increasing the stability of the slope.

  12. Designing HIGH-COST medicine: hospital surveys, health planning, and the paradox of progressive reform.

    Science.gov (United States)

    Perkins, Barbara Bridgman

    2010-02-01

    Inspired by social medicine, some progressive US health reforms have paradoxically reinforced a business model of high-cost medical delivery that does not match social needs. In analyzing the financial status of their areas' hospitals, for example, city-wide hospital surveys of the 1910s through 1930s sought to direct capital investments and, in so doing, control competition and markets. The 2 national health planning programs that ran from the mid-1960s to the mid-1980s continued similar strategies of economic organization and management, as did the so-called market reforms that followed. Consequently, these reforms promoted large, extremely specialized, capital-intensive institutions and systems at the expense of less complex (and less costly) primary and chronic care. The current capital crisis may expose the lack of sustainability of such a model and open up new ideas and new ways to build health care designed to meet people's health needs.

  13. Monte Carlo Analysis as a Trajectory Design Driver for the Transiting Exoplanet Survey Satellite (TESS) Mission

    Science.gov (United States)

    Nickel, Craig; Parker, Joel; Dichmann, Don; Lebois, Ryan; Lutz, Stephen

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) will be injected into a highly eccentric Earth orbit and fly 3.5 phasing loops followed by a lunar flyby to enter a mission orbit with lunar 2:1 resonance. Through the phasing loops and mission orbit, the trajectory is significantly affected by lunar and solar gravity. We have developed a trajectory design to achieve the mission orbit and meet mission constraints, including eclipse avoidance and a 30-year geostationary orbit avoidance requirement. A parallelized Monte Carlo simulation was performed to validate the trajectory after injecting common perturbations, including launch dispersions, orbit determination errors, and maneuver execution errors. The Monte Carlo analysis helped identify mission risks and is used in the trajectory selection process.

  14. Three-dimensional seismic survey planning based on the newest data acquisition design technique; Saishin no data shutoku design ni motozuku sanjigen jishin tansa keikaku

    Energy Technology Data Exchange (ETDEWEB)

    Minehara, M; Nakagami, K; Tanaka, H [Japan National Oil Corp., Tokyo (Japan). Technology Research Center

    1996-10-01

    Theory of parameter setting for data acquisition is arranged, mainly as to the seismic generating and receiving geometry. This paper also introduces an example of survey planning for three-dimensional land seismic exploration in progress. For the design of data acquisition, fundamental parameters are firstly determined on the basis of the characteristics of reflection records at a given district, and then, the layout of survey is determined. In this study, information through modeling based on the existing interpretation of geologic structures is also utilized, to reflect them for survey specifications. Land three-dimensional seismic survey was designed. Ground surface of the surveyed area consists of rice fields and hilly regions. The target was a nose-shaped structure in the depth about 2,500 m underground. A survey area of 4km{times}5km was set. Records in the shallow layers could not obtained when near offset was not ensured. Quality control of this distribution was important for grasping the shallow structure required. In this survey, the seismic generating point could be ensured more certainly than initially expected, which resulted in the sufficient security of near offset. 2 refs., 2 figs.

  15. LH2 Target Design & Position Survey Techniques for the MUSE experiment for Precise Proton Radius Measurement

    Science.gov (United States)

    Le Pottier, Luc; Roy, Pryiashee; Lorenzon, Wolfgang; Raymond, Richard; Steinberg, Noah; Rossi de La Fuente, Erick; MUSE (MUon proton Scattering Experiment) Collaboration

    2017-09-01

    The proton radius puzzle is a currently unresolved problem which has intrigued the scientific community, dealing with a 7 σ discrepancy between the proton radii determined from muonic hydrogen spectroscopy and electron scattering measurements. The MUon Scattering Experiment (MUSE) aims to resolve this puzzle by performing the first simultaneous elastic scattering measurements of both electrons and muons on the proton, which will allow the comparison of the radii from the two interactions with reduced systematic uncertainties. The data from this experiment is expected to provide the best test of lepton universality to date. The experiment will take place at the Paul Scherrer Institute in Switzerland in 2018. An essential component of the experiment is a liquid hydrogen (LH2) cryotarget system. Our group at the University of Michigan is responsible for the design, fabrication and installation of this system. Here we present our LH2 target cell design and fabrication techniques for successful operation at 20 K and 1 atm, and our computer vision-based target position survey system which will determine the position of the target, installed inside a vacuum chamber, with 0.01 mm or better precision at the height of the liquid hydrogen target and along the beam direction during the experiment.

  16. A Polar Rover for Large-Scale Scientific Surveys: Design, Implementation and Field Test Results

    Directory of Open Access Journals (Sweden)

    Yuqing He

    2015-10-01

    Full Text Available Exploration of polar regions is of great importance to scientific research. Unfortunately, due to the harsh environment, most of the regions on the Antarctic continent are still unreachable for humankind. Therefore, in 2011, the Chinese National Antarctic Research Expedition (CHINARE launched a project to design a rover to conduct large-scale scientific surveys on the Antarctic. The main challenges for the rover are twofold: one is the mobility, i.e., how to make a rover that could survive the harsh environment and safely move on the uneven, icy and snowy terrain; the other is the autonomy, in that the robot should be able to move at a relatively high speed with little or no human intervention so that it can explore a large region in a limit time interval under the communication constraints. In this paper, the corresponding techniques, especially the polar rover's design and autonomous navigation algorithms, are introduced in detail. Subsequently, an experimental report of the fields tests on the Antarctic is given to show some preliminary evaluation of the rover. Finally, experiences and existing challenging problems are summarized.

  17. Mechanical Design of NESSI: New Mexico Tech Extrasolar Spectroscopic Survey Instrument

    Science.gov (United States)

    Santoro, Fernando G.; Olivares, Andres M.; Salcido, Christopher D.; Jimenez, Stephen R.; Jurgenson, Colby A.; Hrynevych, Michael A.; Creech-Eakman, Michelle J.; Boston, Penny J.; Schmidt, Luke M.; Bloemhard, Heather; hide

    2011-01-01

    NESSI: the New Mexico Tech Extrasolar Spectroscopic Survey Instrument is a ground-based multi-object spectrograph that operates in the near-infrared. It will be installed on one of the Nasmyth ports of the Magdalena Ridge Observatory (MRO) 2.4-meter Telescope sited in the Magdalena Mountains, about 48 km west of Socorro-NM. NESSI operates stationary to the telescope fork so as not to produce differential flexure between internal opto-mechanical components during or between observations. An appropriate mechanical design allows the instrument alignment to be highly repeatable and stable for both short and long observation timescales, within a wide-range of temperature variation. NESSI is optically composed of a field lens, a field de-rotator, re-imaging optics, an auto-guider and a Dewar spectrograph that operates at LN2 temperature. In this paper we report on NESSI's detailed mechanical and opto-mechanical design, and the planning for mechanical construction, assembly, integration and verification.

  18. Radiation survey of first Hi-Art II Tomotherapy vault design in India

    International Nuclear Information System (INIS)

    Kinhikar, Rajesh A.; Jamema, S.V.; Pai, Rajeshree; Sharma, P.K. Dash; Deshpande, Deepak D.

    2009-01-01

    A vault as per government-regulation compliance with adequate shielding needs was designed and constructed for Hi-Art II Tomotherapy machine being the first in India. Radiation measurements around this Tomotherapy treatment vault were carried out to check the shielding adequacy of the source housing and the vault. It was mandatory to get this un-conventional machine 'Type Approved' by Atomic Energy Regulatory Board (AERB) in India. The aim of this paper was to report on the radiation levels measured during the radiation survey carried out for this machine. The radiation levels in and around the vault were measured for stationary as well as rotational treatment procedures with the largest open field size (5 cm x 40 cm) at the isocenter with and without scattering medium. The survey was performed at three locations near each wall surrounding the vault as well. The leakage radiation from the source housing was measured both in the patient plane outside the treatment field and one meter distance from the source outside the patient plane. The radiation levels both for stationary as well as rotational procedures were within 1 mR/h. No significance difference was observed in the radiation levels measured for rotational procedures with and without scattering medium. The leakage radiation in the patient plane was found to be 0.04% (Tolerance 0.2%), while the head leakage was 0.007% (Tolerance 0.5%) of the dose rate at the isocenter. The treatment delivery with Tomotherapy does play safe radiation levels around the installation layout and also passes the leakage criteria as well.

  19. AHTD cracking protocol application with automated distress survey for design and management.

    Science.gov (United States)

    2011-03-09

    Manual surveys of pavement cracking have problems associated with variability, repeatability, processing : speed, and cost. If conducted in the field, safety and related liability of manual survey present challenges : to highway agencies. Therefore a...

  20. Optimal design of a lagrangian observing system for hydrodynamic surveys in coastal areas

    Science.gov (United States)

    Cucco, Andrea; Quattrocchi, Giovanni; Antognarelli, Fabio; Satta, Andrea; Maicu, Francesco; Ferrarin, Christian; Umgiesser, Georg

    2014-05-01

    The optimization of ocean observing systems is a pressing need for scientific research. In particular, the improvement of ocean short-term observing networks is achievable by reducing the cost-benefit ratio of the field campaigns and by increasing the quality of measurements. Numerical modeling is a powerful tool for determining the appropriateness of a specific observing system and for optimizing the sampling design. This is particularly true when observations are carried out in coastal areas and lagoons where, the use satellites is prohibitive due to the water shallowness. For such areas, numerical models are the most efficient tool both to provide a preliminary assess of the local physical environment and to make short -term predictions above its change. In this context, a test case experiment was carried out within an enclosed shallow water areas, the Cabras Lagoon (Sardinia, Italy). The aim of the experiment was to explore the optimal design for a field survey based on the use of coastal lagrangian buoys. A three-dimensional hydrodynamic model based on the finite element method (SHYFEM3D, Umgiesser et al., 2004) was implemented to simulate the lagoon water circulation. The model domain extent to the whole Cabras lagoon and to the whole Oristano Gulf, including the surrounding coastal area. Lateral open boundary conditions were provided by the operational ocean model system WMED and only wind forcing, provided by SKIRON atmospheric model (Kallos et al., 1997), was considered as surface boundary conditions. The model was applied to provide a number of ad hoc scenarios and to explore the efficiency of the short-term hydrodynamic survey. A first field campaign was carried out to investigate the lagrangian circulation inside the lagoon under the main wind forcing condition (Mistral wind from North-West). The trajectories followed by the lagrangian buoys and the estimated lagrangian velocities were used to calibrate the model parameters and to validate the

  1. Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study

    Science.gov (United States)

    Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

    2018-01-01

    Background The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). Objective This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Methods Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs—a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)—and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad

  2. Utility FGD Survey, January--December 1989. Volume 2, Design performance data for operating FGD systems, Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. [IT Corp., Cincinnati, OH (United States)

    1992-03-01

    The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

  3. A two-phase sampling design for increasing detections of rare species in occupancy surveys

    Science.gov (United States)

    Pacifici, Krishna; Dorazio, Robert M.; Dorazio, Michael J.

    2012-01-01

    1. Occupancy estimation is a commonly used tool in ecological studies owing to the ease at which data can be collected and the large spatial extent that can be covered. One major obstacle to using an occupancy-based approach is the complications associated with designing and implementing an efficient survey. These logistical challenges become magnified when working with rare species when effort can be wasted in areas with none or very few individuals. 2. Here, we develop a two-phase sampling approach that mitigates these problems by using a design that places more effort in areas with higher predicted probability of occurrence. We compare our new sampling design to traditional single-season occupancy estimation under a range of conditions and population characteristics. We develop an intuitive measure of predictive error to compare the two approaches and use simulations to assess the relative accuracy of each approach. 3. Our two-phase approach exhibited lower predictive error rates compared to the traditional single-season approach in highly spatially correlated environments. The difference was greatest when detection probability was high (0·75) regardless of the habitat or sample size. When the true occupancy rate was below 0·4 (0·05-0·4), we found that allocating 25% of the sample to the first phase resulted in the lowest error rates. 4. In the majority of scenarios, the two-phase approach showed lower error rates compared to the traditional single-season approach suggesting our new approach is fairly robust to a broad range of conditions and design factors and merits use under a wide variety of settings. 5. Synthesis and applications. Conservation and management of rare species are a challenging task facing natural resource managers. It is critical for studies involving rare species to efficiently allocate effort and resources as they are usually of a finite nature. We believe our approach provides a framework for optimal allocation of effort while

  4. [Design and implementation of information management system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    By means of the established Information Management System for Chinese materia medica resources survey, the national, provincial and county level organization, personnel and the implementation of the program of Chinese materia medica resources survey, and the survey team of medicinal plant investigation, photos, Chinese herbal medicine market survey, the traditional Chinese materia medica resources knowledge survey, germplasm resources investigation and the data collation and summary specimen have been realised. Throughout the whole working process of the fourth national Chinese materia medica resources survey, it is ensured that all data were no missing, no repeat, and well stored and managed. The Information Management System can improve the standardization degree of Chinese materia medica resources survey, and maintain the continuity. Copyright© by the Chinese Pharmaceutical Association.

  5. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    Directory of Open Access Journals (Sweden)

    Johannes Müntinga

    2018-02-01

    Full Text Available This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Patrick Keiller’s film Robinson in Space, the students were invited to explore the Situationist techniques of Drifting and Psychogeography, and to use them in their visual storytelling. The studio´s title A Survey of Utopia makes reference to the architectural and urbanistic projects that were visited: visionary residential projects from the 1960s to 1980s, built by well-known architects of this period, such as Lucien Kroll, Walter Segal and Leon Krier. The term utopia hints at the projects shared interest in radical change and bold new architectural approaches, even though each pursues its own distinct kind of utopia.

  6. Evaluating the Needs of Patients Living With Solid Tumor Cancer: A Survey Design.

    Science.gov (United States)

    Schmidt, April L; Lorenz, Rebecca A; Buchanan, Paula M; McLaughlin, Laura

    2018-03-01

    To describe the unmet needs of adult patients living with solid tumor cancer. Survey design. Adult patients living with solid tumor cancer from two outpatient clinics were mailed the Sheffield Profile for Assessment and Referral to Care, a holistic screening questionnaire for assessing palliative care needs, and a demographics questionnaire. One hundred fifteen patients returned the instruments, corresponding to a 62% response rate. There were no significant differences by cancer type (breast, non-breast) or gender. However, Caucasians reported significantly more psychological issues, such as anxiety, than non-Caucasians ([ n = 101 (87.8%)] and [ n = 14 (12.2%)], respectively, p = .032). Older patients reported more concerns about loss of independence/activity ( p = .012) compared with younger age groups. Patients living with Stage III/IV cancer reported more distressed about independence/activity ( p = .034), family/social issues ( p = .007), and treatment side effects ( p = .027) than patients living with Stage I/II cancer. Patients living with solid tumor cancer have a myriad of unmet needs regardless of age, gender, cancer type, or cancer stage. There appears to be important differences by cancer stage. The Sheffield Profile for Assessment and Referral to Care questionnaire provides a holistic approach for nurses to identify unmet needs and concerns. Future research should explore the preferred methods of receiving support and information.

  7. Mode Equivalence of Health Indicators Between Data Collection Modes and Mixed-Mode Survey Designs in Population-Based Health Interview Surveys for Children and Adolescents: Methodological Study.

    Science.gov (United States)

    Mauz, Elvira; Hoffmann, Robert; Houben, Robin; Krause, Laura; Kamtsiuris, Panagiotis; Gößwald, Antje

    2018-03-05

    The implementation of an Internet option in an existing public health interview survey using a mixed-mode design is attractive because of lower costs and faster data availability. Additionally, mixed-mode surveys can increase response rates and improve sample composition. However, mixed-mode designs can increase the risk of measurement error (mode effects). This study aimed to determine whether the prevalence rates or mean values of self- and parent-reported health indicators for children and adolescents aged 0-17 years differ between self-administered paper-based questionnaires (SAQ-paper) and self-administered Web-based questionnaires (SAQ-Web), as well as between a single-mode control group and different mixed-mode groups. Data were collected for a methodological pilot of the third wave of the "German Health Interview and Examination Survey for Children and Adolescents". Questionnaires were completed by parents or adolescents. A population-based sample of 11,140 children and adolescents aged 0-17 years was randomly allocated to 4 survey designs-a single-mode control group with paper-and-pencil questionnaires only (n=970 parents, n=343 adolescents)-and 3 mixed-mode designs, all of which offered Web-based questionnaire options. In the concurrent mixed-mode design, both questionnaires were offered at the same time (n=946 parents, n=290 adolescents); in the sequential mixed-mode design, the SAQ-Web was sent first, followed by the paper questionnaire along with a reminder (n=854 parents, n=269 adolescents); and in the preselect mixed-mode design, both options were offered and the respondents were asked to request the desired type of questionnaire (n=698 parents, n=292 adolescents). In total, 3468 questionnaires of parents of children aged 0-17 years (SAQ-Web: n=708; SAQ-paper: n=2760) and 1194 questionnaires of adolescents aged 11-17 years (SAQ-Web: n=299; SAQ-paper: n=895) were analyzed. Sociodemographic characteristics and a broad range of health indicators for

  8. The use of advanced web-based survey design in Delphi research.

    Science.gov (United States)

    Helms, Christopher; Gardner, Anne; McInnes, Elizabeth

    2017-12-01

    A discussion of the application of metadata, paradata and embedded data in web-based survey research, using two completed Delphi surveys as examples. Metadata, paradata and embedded data use in web-based Delphi surveys has not been described in the literature. The rapid evolution and widespread use of online survey methods imply that paper-based Delphi methods will likely become obsolete. Commercially available web-based survey tools offer a convenient and affordable means of conducting Delphi research. Researchers and ethics committees may be unaware of the benefits and risks of using metadata in web-based surveys. Discussion paper. Two web-based, three-round Delphi surveys were conducted sequentially between August 2014 - January 2015 and April - May 2016. Their aims were to validate the Australian nurse practitioner metaspecialties and their respective clinical practice standards. Our discussion paper is supported by researcher experience and data obtained from conducting both web-based Delphi surveys. Researchers and ethics committees should consider the benefits and risks of metadata use in web-based survey methods. Web-based Delphi research using paradata and embedded data may introduce efficiencies that improve individual participant survey experiences and reduce attrition across iterations. Use of embedded data allows the efficient conduct of multiple simultaneous Delphi surveys across a shorter timeframe than traditional survey methods. The use of metadata, paradata and embedded data appears to improve response rates, identify bias and give possible explanation for apparent outlier responses, providing an efficient method of conducting web-based Delphi surveys. © 2017 John Wiley & Sons Ltd.

  9. Statistical properties of mean stand biomass estimators in a LIDAR-based double sampling forest survey design.

    Science.gov (United States)

    H.E. Anderson; J. Breidenbach

    2007-01-01

    Airborne laser scanning (LIDAR) can be a valuable tool in double-sampling forest survey designs. LIDAR-derived forest structure metrics are often highly correlated with important forest inventory variables, such as mean stand biomass, and LIDAR-based synthetic regression estimators have the potential to be highly efficient compared to single-stage estimators, which...

  10. Improving the design of amphibian surveys using soil data: A case study in two wilderness areas

    Science.gov (United States)

    Bowen, K.D.; Beever, E.A.; Gafvert, U.B.

    2009-01-01

    Amphibian populations are known, or thought to be, declining worldwide. Although protected natural areas may act as reservoirs of biological integrity and serve as benchmarks for comparison with unprotected areas, they are not immune from population declines and extinctions and should be monitored. Unfortunately, identifying survey sites and performing long-term fieldwork within such (often remote) areas involves a special set of problems. We used the USDA Natural Resource Conservation Service Soil Survey Geographic (SSURGO) Database to identify, a priori, potential habitat for aquatic-breeding amphibians on North and South Manitou Islands, Sleeping Bear Dunes National Lakeshore, Michigan, and compared the results to those obtained using National Wetland Inventory (NWI) data. The SSURGO approach identified more target sites for surveys than the NWI approach, and it identified more small and ephemeral wetlands. Field surveys used a combination of daytime call surveys, night-time call surveys, and perimeter surveys. We found that sites that would not have been identified with NWI data often contained amphibians and, in one case, contained wetland-breeding species that would not have been found using NWI data. Our technique allows for easy a priori identification of numerous survey sites that might not be identified using other sources of spatial information. We recognize, however, that the most effective site identification and survey techniques will likely use a combination of methods in addition to those described here.

  11. An affordable proxy of representative national survey on radon concentration in dwellings: Design, organisation and preliminary evaluation of representativeness

    International Nuclear Information System (INIS)

    Antignani, Sara; Carelli, Vinicio; Cordedda, Carlo; Zonno, Fedele; Ampollini, Marco; Carpentieri, Carmela; Venoso, Gennaro; Bochicchio, Francesco

    2013-01-01

    comparison showed that, at national level, the Italian dwellings are quite well represented by the sample. - Highlights: ► In Italy a new national survey was designed and organised. ► A new approach for a proxy of a representative national survey was used. ► The aim is to estimate the frequency distribution of indoor radon concentration in all the 110 Italian Provinces. ► The realisation of this survey was feasible and affordable. ► Preliminary evaluation of sample representativeness was performed at national level

  12. User Needs in Green ITS : Results of a Questionnaire Survey and Proposal for Green ITS Design

    NARCIS (Netherlands)

    Man, W.Y.; Bie, J.; Van Arem, B.

    2012-01-01

    An internet survey has been conducted among drivers in the Netherlands and Japan to study their attitude towards Green ITS. The survey focuses on driving behavior and ITS experience, attitude towards environment, and Green ITS preferences. The results show that money-related information gives the

  13. A knowledge - based system to assist in the design of soil survey schemes

    NARCIS (Netherlands)

    Domburg, P.

    1994-01-01

    Soil survey information with quantified accuracy is relevant to decisions on land use and environmental problems. To obtain such information statistical strategies should be used for collecting and analysing data. A survey project based on a statistical sampling strategy requires a soil

  14. User needs in green ITS: results of a questionnaire survey and proposal for green ITS design

    NARCIS (Netherlands)

    Man, Wing Yan; Bie, Jing; van Arem, Bart

    2011-01-01

    An internet survey has been conducted among drivers in the Netherlands and Japan to study their attitude towards Green ITS. The survey focuses on driving behavior and ITS experience, attitude towards environment, and Green ITS preferences. The results show that money-related information gives the

  15. Report on the Survey of the Design Review of New Reactor Applications. Volume 4: Reactor Coolant and Associated Systems

    International Nuclear Information System (INIS)

    Downey, Steven; Monninger, John; Nevalainen, Janne; Joyer, Philippe; Koley, Jaharlal; Kawamura, Tomonori; Chung, Yeon-Ki; Haluska, Ladislav; Persic, Andreja; Reierson, Craig; Monninger, John; Choi, Young-Joon; )

    2017-01-01

    At the tenth meeting of the Committee on Nuclear Regulatory Activities (CNRA) Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the Working Group agreed to present the responses to the Second Phase, or Design Phase, of the licensing process survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This report provides a discussion of the survey responses related to the Reactor Coolant and Associated Systems category. The Reactor Coolant and Associated Systems category includes the following technical topics: overpressure protection, reactor coolant pressure boundary, reactor vessel, and design of the reactor coolant system. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the level of effort needed to perform the review. Based on a comparison of the information provided by the member countries in response to the survey, the following observations were made: - Although the description of the information provided by the applicant differs in scope and level of detail among the member countries that provided responses, there are similarities in the information that is required. - All of the technical topics covered in the survey are reviewed in some manner by all of the regulatory authorities that provided responses. - It is common to consider operating experience and lessons learnt from the current fleet during the review process. - The most commonly and consistently identified technical expertise needed to perform design reviews related to this category are mechanical engineering and materials engineering. The complete survey

  16. Human factors methods for nuclear control room design. Volume 2. Human factors survey of control room design practices

    International Nuclear Information System (INIS)

    Seminara, J.L.; Parsons, S.O.

    1979-11-01

    An earlier review of the control rooms of operating nuclear power plants identified many design problems having potential for degrading operator performance. As a result, the formal application of human factors principles was found to be needed. This report demonstrates the use of human factors in the design of power plant control rooms. The approaches shown in the report can be applied to operating power plants, as well as to those in the design stage. This study documents human factors techniques required to provide a sustained concern for the man-machine interface from control room concept definition to system implementation

  17. Design Evolution of the Wide Field Infrared Survey Telescope Using Astrophysics Focused Telescope Assets (WFIRST-AFTA) and Lessons Learned

    Science.gov (United States)

    Peabody, Hume L.; Peters, Carlton V.; Rodriguez-Ruiz, Juan E.; McDonald, Carson S.; Content, David A.; Jackson, Clifton E.

    2015-01-01

    The design of the Wide Field Infrared Survey Telescope using Astrophysics Focused Telescope Assets (WFIRST-AFTA) continues to evolve as each design cycle is analyzed. In 2012, two Hubble sized (2.4 m diameter) telescopes were donated to NASA from elsewhere in the Federal Government. NASA began investigating potential uses for these telescopes and identified WFIRST as a mission to benefit from these assets. With an updated, deeper, and sharper field of view than previous design iterations with a smaller telescope, the optical designs of the WFIRST instruments were updated and the mechanical and thermal designs evolved around the new optical layout. Beginning with Design Cycle 3, significant analysis efforts yielded a design and model that could be evaluated for Structural-Thermal-Optical-Performance (STOP) purposes for the Wide Field Imager (WFI) and provided the basis for evaluating the high level observatory requirements. Development of the Cycle 3 thermal model provided some valuable analysis lessons learned and established best practices for future design cycles. However, the Cycle 3 design did include some major liens and evolving requirements which were addressed in the Cycle 4 Design. Some of the design changes are driven by requirements changes, while others are optimizations or solutions to liens from previous cycles. Again in Cycle 4, STOP analysis was performed and further insights into the overall design were gained leading to the Cycle 5 design effort currently underway. This paper seeks to capture the thermal design evolution, with focus on major design drivers, key decisions and their rationale, and lessons learned as the design evolved.

  18. A comparison of GPR performance at various frequencies - a guide to improved survey design

    CSIR Research Space (South Africa)

    Kgarume, Thabang E

    2015-09-01

    Full Text Available This paper aims to demonstrate, through practical examples and numerical modelling, the trade-off between range and resolution in ground penetrating radar (GPR) prospecting. GPR surveys can easily fail when the target and host rock properties...

  19. [Design and implementation of data reporting system for Chinese materia medica resources survey].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jing, Zhi-Xian; Wang, Ling; Zhao, Yu-Ping; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    The collection, summary and sharing of all kinds of survey data are one of the main tasks and achievements in the national census of Chinese materia medica resources organized and implemented by the State Administration of Traditional Chinese Medicine. It is a key link in the implementation of the national census of Chinese materia medica resources. Based on the client / server architecture, the data reporting system for Chinese materia medica resources survey has been established for reporting system application model of geospatial data service based on Web implementation, through the SOA framework, to achieve the data collection summary of the seven aspects of the local data configuration, data reporting, data verification, data reporting, PDA data import and export, APP data import, track instrument data import. The system services include the general investigation, the focus of investigation, specimen information, herbs sample information, market research, germplasm survey, traditional knowledge survey of these seven aspects of the 312 indicators of the report, serving the Chinese materia medica resource survey of field survey data collection and internal data collation. The system provides the technical support for the national census of Chinese materia medica resources, improves the efficiency of the census of Chinese materia medica resources, and is conducive to the long-term preservation of the data of Chinese materia medica resources census, the transformation and sharing of the results. Copyright© by the Chinese Pharmaceutical Association.

  20. A nationwide population-based cross-sectional survey of health-related quality of life in patients with myeloproliferative neoplasms in Denmark (MPNhealthSurvey: survey design and characteristics of respondents and nonrespondents

    Directory of Open Access Journals (Sweden)

    Brochmann N

    2017-03-01

    Full Text Available Nana Brochmann,1 Esben Meulengracht Flachs,2 Anne Illemann Christensen,3 Christen Lykkegaard Andersen,1 Knud Juel,3 Hans Carl Hasselbalch,1 Ann-Dorthe Zwisler4 1Department of Hematology, Zealand University Hospital, University of Copenhagen, Roskilde, 2Department of Occupational and Environmental Medicine, Bispebjerg University Hospital, Copenhagen, 3National Institute of Public Health, University of Southern Denmark, Copenhagen, 4Danish Knowledge Centre for Rehabilitation and Palliative Care, University of Southern Denmark and Odense University Hospital, Odense, Denmark Objective: The Department of Hematology, Zealand University Hospital, Denmark, and the National Institute of Public Health, University of Southern Denmark, created the first nationwide, population-based, and the most comprehensive cross-sectional health-related quality of life (HRQoL survey of patients with myeloproliferative neoplasms (MPNs. In Denmark, all MPN patients are treated in public hospitals and treatments received are free of charge for these patients. Therefore, MPN patients receive the best available treatment to the extent of its suitability for them and if they wish to receive the treatment. The aims of this article are to describe the survey design and the characteristics of respondents and nonrespondents. Material and methods: Individuals with MPN diagnoses registered in the Danish National Patient Register (NPR were invited to participate. The registers of the Danish Civil Registration System and Statistics Denmark provided information regarding demographics. The survey contained 120 questions: validated patient-reported outcome (PRO questionnaires and additional questions addressing lifestyle. Results: A total of 4,704 individuals were registered with MPN diagnoses in the NPR of whom 4,236 were eligible for participation and 2,613 (62% responded. Overall, the respondents covered the broad spectrum of MPN patients, but patients 70–79 years old, living with

  1. Design and methodology of a mixed methods follow-up study to the 2014 Ghana Demographic and Health Survey.

    Science.gov (United States)

    Staveteig, Sarah; Aryeetey, Richmond; Anie-Ansah, Michael; Ahiadeke, Clement; Ortiz, Ladys

    2017-01-01

    The intended meaning behind responses to standard questions posed in large-scale health surveys are not always well understood. Systematic follow-up studies, particularly those which pose a few repeated questions followed by open-ended discussions, are well positioned to gauge stability and consistency of data and to shed light on the intended meaning behind survey responses. Such follow-up studies require extensive coordination and face challenges in protecting respondent confidentiality during the process of recontacting and reinterviewing participants. We describe practical field strategies for undertaking a mixed methods follow-up study during a large-scale health survey. The study was designed as a mixed methods follow-up study embedded within the 2014 Ghana Demographic and Health Survey (GDHS). The study was implemented in 13 clusters. Android tablets were used to import reference data from the parent survey and to administer the questionnaire, which asked a mixture of closed- and open-ended questions on reproductive intentions, decision-making, and family planning. Despite a number of obstacles related to recontacting respondents and concern about respondent fatigue, over 92 percent of the selected sub-sample were successfully recontacted and reinterviewed; all consented to audio recording. A confidential linkage between GDHS data, follow-up tablet data, and audio transcripts was successfully created for the purpose of analysis. We summarize the challenges in follow-up study design, including ethical considerations, sample size, auditing, filtering, successful use of tablets, and share lessons learned for future such follow-up surveys.

  2. Utilizing the Total Design Method in medicine: maximizing response rates in long, non-incentivized, personal questionnaire postal surveys.

    Science.gov (United States)

    Kazzazi, Fawz; Haggie, Rebecca; Forouhi, Parto; Kazzazi, Nazar; Malata, Charles M

    2018-01-01

    Maximizing response rates in questionnaires can improve their validity and quality by reducing non-response bias. A comprehensive analysis is essential for producing reasonable conclusions in patient-reported outcome research particularly for topics of a sensitive nature. This often makes long (≥7 pages) questionnaires necessary but these have been shown to reduce response rates in mail surveys. Our work adapted the "Total Design Method," initially produced for commercial markets, to raise response rates in a long (total: 11 pages, 116 questions), non-incentivized, very personal postal survey sent to almost 350 women. A total of 346 women who had undergone mastectomy and immediate breast reconstruction from 2008-2014 (inclusive) at Addenbrooke's University Hospital were sent our study pack (Breast-Q satisfaction questionnaire and support documents) using our modified "Total Design Method." Participants were sent packs and reminders according to our designed schedule. Of the 346 participants, we received 258 responses, an overall response rate of 74.5% with a useable response rate of 72.3%. One hundred and six responses were received before the week 1 reminder (30.6%), 120 before week 3 (34.6%), 225 before the week 7 reminder (64.6%) and the remainder within 3 weeks of the final pack being sent. The median age of patients that the survey was sent to, and the median age of the respondents, was 54 years. In this study, we have demonstrated the successful implementation of a novel approach to postal surveys. Despite the length of the questionnaire (nine pages, 116 questions) and limitations of expenses to mail a survey to ~350 women, we were able to attain a response rate of 74.6%.

  3. A Survey of Structural Design of Diagnostic X-ray Imaging Facilities and Compliance to Shielding Design Goals in a Limited Resource Setting

    Directory of Open Access Journals (Sweden)

    Flavious B. Nkubli

    2017-11-01

    Full Text Available Purpose: To survey structural designs of x-ray rooms and compliance to shielding design goals of three x-ray imaging facilities. Methods and Materials: The survey was conducted in three radiodiagnostic centers in South East Nigeria, labeled X, Y and Z for anonymity. A stretchable non-elastic meter rule was used to measure x-ray room dimensions. A Vernier caliper was used to measure lead thickness while a calibrated digital survey meter Radalert 100x was used for radiation survey of controlled and uncontrolled areas. Simple statistical tools such as mean and standard deviation were used for analysis with the aid of Microsoft Excel version 2007. Results: Center X had a room dimension of 2.4 m × 2.1 m, Center Y had an x-ray room dimension of 3.6 m × 3.3 m, and Center Z had two x-ray rooms with identical dimensions of 6.3 m × 3.6 m. Measured exit radiation doses for controlled areas in all the centers were: 0.00152 mSv/wk; 0.00496 mSv/wk; 0.00168 mSv/wk; 0.00224 mSv/wk respectively. Lead was the common shielding material used. Conclusion: Based on the parameters studied, Center Z had the ideal room size and layout. Relative distances from the x-ray tubes to the nearest walls were not optimized in all the centers except in Center Z. Measured exit doses were within recommended limits except in Center Y. The location of the control consoles and measured doses were appropriate and within recommended design goals.

  4. [New design of the Health Survey of Catalonia (Spain, 2010-2014): a step forward in health planning and evaluation].

    Science.gov (United States)

    Alcañiz-Zanón, Manuela; Mompart-Penina, Anna; Guillén-Estany, Montserrat; Medina-Bustos, Antonia; Aragay-Barbany, Josep M; Brugulat-Guiteras, Pilar; Tresserras-Gaju, Ricard

    2014-01-01

    This article presents the genesis of the Health Survey of Catalonia (Spain, 2010-2014) with its semiannual subsamples and explains the basic characteristics of its multistage sampling design. In comparison with previous surveys, the organizational advantages of this new statistical operation include rapid data availability and the ability to continuously monitor the population. The main benefits are timeliness in the production of indicators and the possibility of introducing new topics through the supplemental questionnaire as a function of needs. Limitations consist of the complexity of the sample design and the lack of longitudinal follow-up of the sample. Suitable sampling weights for each specific subsample are necessary for any statistical analysis of micro-data. Accuracy in the analysis of territorial disaggregation or population subgroups increases if annual samples are accumulated. Copyright © 2013 SESPAS. Published by Elsevier Espana. All rights reserved.

  5. Design of a Mars Airplane Propulsion System for the Aerial Regional-Scale Environmental Survey (ARES) Mission Concept

    Science.gov (United States)

    Kuhl, Christopher A.

    2008-01-01

    The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept that utilizes a rocket propelled airplane to take scientific measurements of atmospheric, surface, and subsurface phenomena. The liquid rocket propulsion system design has matured through several design cycles and trade studies since the inception of the ARES concept in 2002. This paper describes the process of selecting a bipropellant system over other propulsion system options, and provides details on the rocket system design, thrusters, propellant tank and PMD design, propellant isolation, and flow control hardware. The paper also summarizes computer model results of thruster plume interactions and simulated flight performance. The airplane has a 6.25 m wingspan with a total wet mass of 185 kg and has to ability to fly over 600 km through the atmosphere of Mars with 45 kg of MMH / MON3 propellant.

  6. A statistical evaluation of the design and precision of the shrimp trawl survey off West Greenland

    DEFF Research Database (Denmark)

    Folmer, Ole; Pennington, M.

    2000-01-01

    statistical techniques were used to estimate two indices of shrimp abundance and their precision, and to determine the effective sample sizes for estimates of length-frequency distributions. It is concluded that the surveys produce a fairly precise abundance index, and that given the relatively small...... effective sample size, reducing tow duration to 15 min would increase overall survey precision. An unexpected outcome of the analysis is that the density of shrimp appears to have been fairly stable over the last 11 years. (C) 2000 Elsevier Science B.V. All rights reserved....

  7. Designing future dark energy space missions. II. Photometric redshift of space weak lensing optimized surveys

    Science.gov (United States)

    Jouvel, S.; Kneib, J.-P.; Bernstein, G.; Ilbert, O.; Jelinsky, P.; Milliard, B.; Ealet, A.; Schimd, C.; Dahlen, T.; Arnouts, S.

    2011-08-01

    Context. With the discovery of the accelerated expansion of the universe, different observational probes have been proposed to investigate the presence of dark energy, including possible modifications to the gravitation laws by accurately measuring the expansion of the Universe and the growth of structures. We need to optimize the return from future dark energy surveys to obtain the best results from these probes. Aims: A high precision weak-lensing analysis requires not an only accurate measurement of galaxy shapes but also a precise and unbiased measurement of galaxy redshifts. The survey strategy has to be defined following both the photometric redshift and shape measurement accuracy. Methods: We define the key properties of the weak-lensing instrument and compute the effective PSF and the overall throughput and sensitivities. We then investigate the impact of the pixel scale on the sampling of the effective PSF, and place upper limits on the pixel scale. We then define the survey strategy computing the survey area including in particular both the Galactic absorption and Zodiacal light variation accross the sky. Using the Le Phare photometric redshift code and realistic galaxy mock catalog, we investigate the properties of different filter-sets and the importance of the u-band photometry quality to optimize the photometric redshift and the dark energy figure of merit (FoM). Results: Using the predicted photometric redshift quality, simple shape measurement requirements, and a proper sky model, we explore what could be an optimal weak-lensing dark energy mission based on FoM calculation. We find that we can derive the most accurate the photometric redshifts for the bulk of the faint galaxy population when filters have a resolution ℛ ~ 3.2. We show that an optimal mission would survey the sky through eight filters using two cameras (visible and near infrared). Assuming a five-year mission duration, a mirror size of 1.5 m and a 0.5 deg2 FOV with a visible pixel

  8. Report of the Survey on the Design Review of New Reactor Applications. Volume 1 - Instrumentation and Control

    International Nuclear Information System (INIS)

    Downey, Steven

    2014-06-01

    At the tenth meeting of the CNRA Working Group on the Regulation of New Reactors (WGRNR) in March 2013, the members agreed to present the responses to the Second Phase, or Design Phase, of the Licensing Process Survey as a multi-volume text. As such, each report will focus on one of the eleven general technical categories covered in the survey. The general technical categories were selected to conform to the topics covered in the International Atomic Energy Agency (IAEA) Safety Guide GS-G-4.1. This report, which is the first volume, provides a discussion of the survey responses related to Instrumentation and Control (I and C). The Instrumentation and Control category includes the twelve following technical topics: Reactor trip system, actuation systems for Engineered Safety Features (ESF), safe shutdown system, safety-related display instrumentation, information and interlock systems important to safety, controls systems, main control room, supplementary control room, diverse I and C systems, data communication systems, software reliability and cyber-security. For each technical topic, the member countries described the information provided by the applicant, the scope and level of detail of the technical review, the technical basis for granting regulatory authorisation, the skill sets required and the Level of effort needed to perform the review. Based on a comparison of the information provided in response to the survey, the following observations were made: - Among the regulatory organisations that responded to the survey, there are similarities in the design information provided by an applicant. In most countries, the design information provided by an applicant includes, but is not limited to, a description of the I and C system design and functions, a description of the verification and validation programmes, and provisions for analysis, testing, and inspection of various I and C systems. - In addition to the regulations, it is a common practice for countries

  9. Web-based survey design for unravelling semi-compensatory choice in transport and urban planning

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Bekhor, Shlomo; Shiftan, Yoram

    2012-01-01

    The estimation of semi-compensatory models is gaining momentum in transport planning in recent years. However, traditional survey methodologies focus on collecting solely compensatory choice data, which leads to information loss when semi-compensatory models are estimated. The present study...

  10. The Outer Solar System Origins Survey. I. ; Design and First-Quarter Discoveries

    Science.gov (United States)

    Bannister, Michele T.; Kavelaars, J. J.; Petit, Jean-Marc; Gladman, Brett J.; Gwyn, Stephen D. J.; Chen, Ying-Tung; Volk, Kathryn; Alexandersen, Mike; Benecchi, Susan D.; Delsanti, Audrey; hide

    2016-01-01

    We report the discovery, tracking, and detection circumstances for 85 trans-Neptunian objects (TNOs) from the first 42 square degrees of the Outer Solar System Origins Survey. This ongoing r-band solar system survey uses the 0.9 square degree field of view MegaPrime camera on the 3.6 meter Canada-France-Hawaii Telescope. Our orbital elements for these TNOs are precise to a fractional semimajor axis uncertainty of less than 0.1 percent. We achieve this precision in just two oppositions, as compared to the normal three to five oppositions, via a dense observing cadence and innovative astrometric technique. These discoveries are free of ephemeris bias, a first for large trans-Neptunian surveys. We also provide the necessary information to enable models of TNO orbital distributions to be tested against our TNO sample. We confirm the existence of a cold "kernel" of objects within the main cold classical Kuiper Belt and infer the existence of an extension of the "stirred" cold classical Kuiper Belt to at least several au beyond the 2:1 mean motion resonance with Neptune. We find that the population model of Petit et al. remains a plausible representation of the Kuiper Belt. The full survey, to be completed in 2017, will provide an exquisitely characterized sample of important resonant TNO populations, ideal for testing models of giant planet migration during the early history of the solar system.

  11. The Tianjin Mental Health Survey (TJMHS) : study rationale, design and methods

    NARCIS (Netherlands)

    Yin, Huifang; Phillips, Michael R; Wardenaar, Klaas J; Xu, Guangming; Ormel, Johan; Tian, Hongjun; Schoevers, Robert A

    Mental health in China is of growing concern to both policy-makers and researchers. The Tianjin Mental Health Survey (TJMHS) was conducted between July 2011 and March 2012 to assess the prevalence and risk factors of mental disorders in the context of recent economic growth and other

  12. The TRacking Adolescents' Individual Lives Survey (TRAILS) : Design, Current Status, and Selected Findings

    NARCIS (Netherlands)

    Ormel, Johan; Oldehinkel, Albertine J; Sijtsema, Jelle; van Oort, Floor; Raven, Dennis; Veenstra, Rene; Vollebergh, Wilma A M; Verhulst, Frank C

    2012-01-01

    Objectives: The objectives of this study were as follows: to present a concise overview of the sample, outcomes, determinants, non-response and attrition of the ongoing TRacking Adolescents' Individual Lives Survey (TRAILS), which started in 2001; to summarize a selection of recent findings on

  13. A design of strategic alliance based on value chain of surveying and mapping enterprises in China

    Science.gov (United States)

    Duan, Hong; Huang, Xianfeng

    2007-06-01

    In this paper, we use value chain and strategic alliance theories to analyzing the surveying and mapping Industry and enterprises. The value chain of surveying and mapping enterprises is highly-contacted but split by administrative interference, the enterprises are common small scale. According to the above things, we consider that establishing a nonequity- Holding strategic alliance based on value chain is an available way, it can not only let the enterprises share the superior resources in different sectors of the whole value chain each other but avoid offending the interests of related administrative departments, by this way, the surveying and mapping enterprises gain development respectively and totally. Then, we give the method to building up the strategic alliance model through parting the value chain and the using advantage of companies in different value chain sectors. Finally, we analyze the internal rule of strategic alliance and prove it is a suitable way to realize the development of surveying and mapping enterprises through game theory.

  14. Design, implementation, and analysis methods for the National Woodland Owner Survey

    Science.gov (United States)

    Brett J. Butler; Earl C. Leatherberry; Michael S. Williams; Michael S. Williams

    2005-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the USDA Forest Service, Forest Inventory and Analysis program to increase our understanding of private forest-land owners in the United States. The information is intended to help policy makers, resource managers, and others interested in the forest resources of the United States better understand the social...

  15. Coherent Power Analysis in Multi-Level Studies Using Design Parameters from Surveys

    Science.gov (United States)

    Rhoads, Christopher

    2016-01-01

    Current practice for conducting power analyses in hierarchical trials using survey based ICC and effect size estimates may be misestimating power because ICCs are not being adjusted to account for treatment effect heterogeneity. Results presented in Table 1 show that the necessary adjustments can be quite large or quite small. Furthermore, power…

  16. USDA Forest Service National Woodland Owner Survey, 2011-2013: design, implementation, and estimation methods

    Science.gov (United States)

    Brett J. Butler; Brenton J. Dickinson; Jaketon H. Hewes; Sarah M. Butler; Kyle Andrejczyk; Marla. Markowski-Lindsay

    2016-01-01

    The National Woodland Owner Survey (NWOS) is conducted by the U.S. Forest Service, Forest Inventory and Analysis program to increase the understanding of the attitudes, behaviors, and demographics of private forest and woodland ownerships across the United States. The information is intended to help policy makers, resource managers, educators, service providers, and...

  17. The TRacking Adolescents' Individual Lives Survey (TRAILS): Design, Current Status, and Selected Findings

    Science.gov (United States)

    Ormel, Johan; Oldehinkel, Albertine J.; Sijtsema, Jelle; van Oort, Floor; Raven, Dennis; Veenstra, Rene; Vollebergh, Wilma A. M.; Verhulst, Frank C.

    2012-01-01

    Objectives: The objectives of this study were as follows: to present a concise overview of the sample, outcomes, determinants, non-response and attrition of the ongoing TRacking Adolescents' Individual Lives Survey (TRAILS), which started in 2001; to summarize a selection of recent findings on continuity, discontinuity, risk, and protective…

  18. SDSS-IV MaNGA IFS GALAXY SURVEY—SURVEY DESIGN, EXECUTION, AND INITIAL DATA QUALITY

    International Nuclear Information System (INIS)

    Yan, Renbin; Zhang, Kai; Bundy, Kevin; Law, David R.; Bershady, Matthew A.; Diamond-Stanic, Aleksandar M.; Andrews, Brett; Cherinka, Brian; Drory, Niv; MacDonald, Nicholas; Sánchez-Gallego, José R.; Thomas, Daniel; Westfall, Kyle B.; Wake, David A.; Weijmans, Anne-Marie; Aragón-Salamanca, Alfonso; Belfiore, Francesco

    2016-01-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R  ∼ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R e ) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5 R e (Primary sample), and one-third of the sample is covered to 2.5 R e (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r -band signal-to-noise ratio is ∼70 per 1.4 Å pixel for spectra stacked between 1 R e and 1.5 R e . Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  19. SDSS-IV MaNGA IFS GALAXY SURVEY—SURVEY DESIGN, EXECUTION, AND INITIAL DATA QUALITY

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Renbin; Zhang, Kai [Department of Physics and Astronomy, University of Kentucky, 505 Rose Street, Lexington, KY 40506-0057 (United States); Bundy, Kevin [Kavli IPMU (WPI), UTIAS, The University of Tokyo, Kashiwa, Chiba 277-8583 (Japan); Law, David R. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); Bershady, Matthew A.; Diamond-Stanic, Aleksandar M. [Department of Astronomy, University of Winsconsin-Madison, 475 N. Charter Street, Madison, WI 53706-1582 (United States); Andrews, Brett [Department of Physics and Astronomy and Pittsburgh Particle Physics, Astrophysics and Cosmology Center (PITT PACC), University of Pittsburgh, 3941 OHara Street, Pittsburgh, PA 15260 (United States); Cherinka, Brian [Department of Physics and Astronomy, Johns Hopkins University, Bloomberg Center, 3400 N. Charles Street, Baltimore, MD 21218 (United States); Drory, Niv [McDonald Observatory, University of Texas at Austin, 1 University Station, Austin, TX 78712-0259 (United States); MacDonald, Nicholas; Sánchez-Gallego, José R. [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States); Thomas, Daniel; Westfall, Kyle B. [Institute of Cosmology and Gravitation, University of Portsmouth, Portsmouth (United Kingdom); Wake, David A. [Department of Physical Sciences, The Open University, Milton Keynes, MK7 6AA (United Kingdom); Weijmans, Anne-Marie [School of Physics and Astronomy, University of St Andrews, North Haugh, St Andrews KY16 9SS (United Kingdom); Aragón-Salamanca, Alfonso [School of Physics and Astronomy, University of Nottingham, University Park, Nottingham NG7 2RD (United Kingdom); Belfiore, Francesco, E-mail: yanrenbin@uky.edu [Cavendish Laboratory, University of Cambridge, 19 J. J. Thomson Avenue, Cambridge CB3 0HE (United Kingdom); and others

    2016-12-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R  ∼ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R{sub e}) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5 R{sub e} (Primary sample), and one-third of the sample is covered to 2.5 R{sub e} (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r -band signal-to-noise ratio is ∼70 per 1.4 Å pixel for spectra stacked between 1 R{sub e} and 1.5 R{sub e}. Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  20. SDSS-IV MaNGA IFS Galaxy Survey—Survey Design, Execution, and Initial Data Quality

    Science.gov (United States)

    Yan, Renbin; Bundy, Kevin; Law, David R.; Bershady, Matthew A.; Andrews, Brett; Cherinka, Brian; Diamond-Stanic, Aleksandar M.; Drory, Niv; MacDonald, Nicholas; Sánchez-Gallego, José R.; Thomas, Daniel; Wake, David A.; Weijmans, Anne-Marie; Westfall, Kyle B.; Zhang, Kai; Aragón-Salamanca, Alfonso; Belfiore, Francesco; Bizyaev, Dmitry; Blanc, Guillermo A.; Blanton, Michael R.; Brownstein, Joel; Cappellari, Michele; D'Souza, Richard; Emsellem, Eric; Fu, Hai; Gaulme, Patrick; Graham, Mark T.; Goddard, Daniel; Gunn, James E.; Harding, Paul; Jones, Amy; Kinemuchi, Karen; Li, Cheng; Li, Hongyu; Maiolino, Roberto; Mao, Shude; Maraston, Claudia; Masters, Karen; Merrifield, Michael R.; Oravetz, Daniel; Pan, Kaike; Parejko, John K.; Sanchez, Sebastian F.; Schlegel, David; Simmons, Audrey; Thanjavur, Karun; Tinker, Jeremy; Tremonti, Christy; van den Bosch, Remco; Zheng, Zheng

    2016-12-01

    The MaNGA Survey (Mapping Nearby Galaxies at Apache Point Observatory) is one of three core programs in the Sloan Digital Sky Survey IV. It is obtaining integral field spectroscopy for 10,000 nearby galaxies at a spectral resolution of R ˜ 2000 from 3622 to 10354 Å. The design of the survey is driven by a set of science requirements on the precision of estimates of the following properties: star formation rate surface density, gas metallicity, stellar population age, metallicity, and abundance ratio, and their gradients; stellar and gas kinematics; and enclosed gravitational mass as a function of radius. We describe how these science requirements set the depth of the observations and dictate sample selection. The majority of targeted galaxies are selected to ensure uniform spatial coverage in units of effective radius (R e ) while maximizing spatial resolution. About two-thirds of the sample is covered out to 1.5R e (Primary sample), and one-third of the sample is covered to 2.5R e (Secondary sample). We describe the survey execution with details that would be useful in the design of similar future surveys. We also present statistics on the achieved data quality, specifically the point-spread function, sampling uniformity, spectral resolution, sky subtraction, and flux calibration. For our Primary sample, the median r-band signal-to-noise ratio is ˜70 per 1.4 Å pixel for spectra stacked between 1R e and 1.5R e . Measurements of various galaxy properties from the first-year data show that we are meeting or exceeding the defined requirements for the majority of our science goals.

  1. Optical Design of the Camera for Transiting Exoplanet Survey Satellite (TESS)

    Science.gov (United States)

    Chrisp, Michael; Clark, Kristin; Primeau, Brian; Dalpiaz, Michael; Lennon, Joseph

    2015-01-01

    The optical design of the wide field of view refractive camera, 34 degrees diagonal field, for the TESS payload is described. This fast f/1.4 cryogenic camera, operating at -75 C, has no vignetting for maximum light gathering within the size and weight constraints. Four of these cameras capture full frames of star images for photometric searches of planet crossings. The optical design evolution, from the initial Petzval design, took advantage of Forbes aspheres to develop a hybrid design form. This maximized the correction from the two aspherics resulting in a reduction of average spot size by sixty percent in the final design. An external long wavelength pass filter was replaced by an internal filter coating on a lens to save weight, and has been fabricated to meet the specifications. The stray light requirements were met by an extended lens hood baffle design, giving the necessary off-axis attenuation.

  2. Survey of waste package designs for disposal of high-level waste/spent fuel in selected foreign countries

    International Nuclear Information System (INIS)

    Schneider, K.J.; Lakey, L.T.; Silviera, D.J.

    1989-09-01

    This report presents the results of a survey of the waste package strategies for seven western countries with active nuclear power programs that are pursuing disposal of spent nuclear fuel or high-level wastes in deep geologic rock formations. Information, current as of January 1989, is given on the leading waste package concepts for Belgium, Canada, France, Federal Republic of Germany, Sweden, Switzerland, and the United Kingdom. All but two of the countries surveyed (France and the UK) have developed design concepts for their repositories, but none of the countries has developed its final waste repository or package concept. Waste package concepts are under study in all the countries surveyed, except the UK. Most of the countries have not yet developed a reference concept and are considering several concepts. Most of the information presented in this report is for the current reference or leading concepts. All canisters for the wastes are cylindrical, and are made of metal (stainless steel, mild steel, titanium, or copper). The canister concepts have relatively thin walls, except those for spent fuel in Sweden and Germany. Diagrams are presented for the reference or leading concepts for canisters for the countries surveyed. The expected lifetimes of the conceptual canisters in their respective disposal environment are typically 500 to 1,000 years, with Sweden's copper canister expected to last as long as one million years. Overpack containers that would contain the canisters are being considered in some of the countries. All of the countries surveyed, except one (Germany) are currently planning to utilize a buffer material (typically bentonite) surrounding the disposal package in the repository. Most of the countries surveyed plan to limit the maximum temperature in the buffer material to about 100 degree C. 52 refs., 9 figs

  3. Sustainable building design in practice – survey among Danish DGNB consultants

    DEFF Research Database (Denmark)

    Brunsgaard, Camilla; Bejder, Anne Kirkegaard

    2017-01-01

    and support the iterative design process in the initial design phases. Therefore, the objective of this paper is to investigate the design process on a more common level experienced by Danish DGNB consultants when designing sustainable buildings using the Danish DGNB certification scheme and thereby possibly......Sustainability certification schemes experience growing popularity. Denmark got its own sustainability certification scheme based on the German DGNB certification scheme. Previous work based on four case studies – DGNB certified healthcare centres, suggests further research on how to improve...

  4. Survey of perceived influence of the conceptual design model of interactive television advertising towards impulse purchase tendency

    Science.gov (United States)

    Sarif, Siti Mahfuzah; Omar, Azizah Che; Shiratuddin, Norshuhada

    2016-08-01

    With the proliferation of technology assisted shopping, there is growing evidence that impulse buying is an emerging phenomenon, which has been the focus of this study. Literatures indicate that studies related to impulse purchase for interactive television (iTV) advertising are highly scarce. It was found that most of the existing impulse purchase elements are mainly focusing on traditional retail store, website advertising, and traditional TV advertising, but not on iTV advertising. Due to that, through a systematic process, a design model for developing iTV advertising with influence towards impulse purchase tendency was developed and tested in this study. The design model is named as iTVAdIP and comprises of three main components; technology, impulse purchase components, and development process. This paper describes the survey, which measures the influence of iTVAdIP design model towards impulse purchase tendency. 37 potential advertising designers were involved in the survey. The results indicate that the iTVAdIP is practical and workable in developing iTV advertisement that could influence consumer to buy the advertised product.

  5. [Design and Implementation of the Data Collection Tools for National Mental Health Survey of Colombia, 2015].

    Science.gov (United States)

    Rodriguez, Viviana; Moreno, Socorro; Camacho, Jhon; Gómez-Restrepo, Carlos; de Santacruz, Cecilia; Rodriguez, Maria Nelcy; Tamayo Martínez, Nathalie

    2016-12-01

    Population surveys on mental health are performed as part of the inputs required for the creation, implementation and evaluation of policies related to mental health, worldwide, and as an initiative of the World Health Organisation (WHO). was held The fourth National Survey of Mental Health (ENSM 2015) was carried out during the first half of 2015 on a representative sample of 2,727 children between 7 and 11 years of age, 1,754 adolescents, and 10, 870 adults who were selected throughout the country. To describe the selection and definition of the tools used to measure mental health (including social cognition and violence), problems, mental disorders, and the evaluation of health states, as well as to describe the process used to develop the data collection tools finally used. The measurement of mental disorders in children was performed using the Diagnostic Interview Schedule for Children (DISC), and the Composite International Diagnostic Interview (CIDI) was used for adolescents and adults. For the remaining components evaluated in the survey, a search was conducted on the tools used at a national and international level. The selection of the toos used for the evaluation was based on the questions made by each tool, as well as the scientific validity that could be obtained from the results. In some cases the complete tool (as published) was used, in other cases the tools were constructed unifying parts of different ones, or questions were written based on the concepts or characteristics to be measured. Subsequently, a validation of content, concept and semantic of every tool was carried out, including the CIDI and DISC. The resulting tools were used on a group of people with different characteristics. It was noted that further clarification was necessary for some people to fully understand what was being asked. Because the collection of all the information in the survey would be computer assisted, a stream format was generated to guide the implementation in

  6. Design Thinking in Integrated STEAM Learning: Surveying the Landscape and Exploring Exemplars in Elementary Grades

    Science.gov (United States)

    Cook, Kristin L.; Bush, Sarah B.

    2018-01-01

    Complementing the aims of problem-based inquiry, a pedagogical approach called design thinking (DT) has students grapple with issues that require a creative redefinition and reimagining of solutions akin to professional skills of designers, who consider conflicting priorities and complex negotiations to arrive at a solution to an ill-defined…

  7. Safeguarding the User - Developing a Multimodal Design for Surveying and Raising Internet Safety and Security Awareness

    DEFF Research Database (Denmark)

    Gjedde, Lisa; Sharp, Robin; Andersen, Preben

    2009-01-01

    Internet safety and security for the user is an issue of great importance for the successful implementation of ICT, but since it is a complex field, with a specialist vocabulary that cannot immediately be understood by the common user, it is difficult to survey the field. The user may not underst......Internet safety and security for the user is an issue of great importance for the successful implementation of ICT, but since it is a complex field, with a specialist vocabulary that cannot immediately be understood by the common user, it is difficult to survey the field. The user may...... describes an ICT-based research method that combines a verbal mode of inquiry with a visual mode employing illustrations, animations and simulations to provide the user with a multimodal media experience. The rationale for this is that we are working in a complex technical field with a specialist vocabulary...

  8. Site study plan for EDBH [Engineering Design Boreholes] seismic surveys, Deaf Smith County site, Texas: Revision 1

    International Nuclear Information System (INIS)

    Hume, H.

    1987-12-01

    This site study plan describes seismic reflection surveys to run north-south and east-west across the Deaf Smith County site, and intersecting near the Engineering Design Boreholes (EDBH). Both conventional and shallow high-resolution surveys will be run. The field program has been designed to acquire subsurface geologic and stratigraphic data to address information/data needs resulting from Federal and State regulations and Repository program requirements. The data acquired by the conventional surveys will be common-depth- point, seismic reflection data optimized for reflection events that indicate geologic structure near the repository horizon. The data will also resolve the basement structure and shallow reflection events up to about the top of the evaporite sequence. Field acquisition includes a testing phase to check/select parameters and a production phase. The field data will be subjected immediately to conventional data processing and interpretation to determine if there are any anamolous structural for stratigraphic conditions that could affect the choice of the EDBH sites. After the EDBH's have been drilled and logged, including vertical seismic profiling, the data will be reprocessed and reinterpreted for detailed structural and stratigraphic information to guide shaft development. The shallow high-resulition seismic reflection lines will be run along the same alignments, but the lines will be shorter and limited to immediate vicinity of the EDBH sites. These lines are planned to detect faults or thick channel sands that may be present at the EDBH sites. 23 refs. , 7 figs., 5 tabs

  9. The DESI Experiment Part I: Science,Targeting, and Survey Design

    Energy Technology Data Exchange (ETDEWEB)

    Aghamousa, Amir; et al.

    2016-10-31

    DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$\\alpha$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.

  10. Survey of editors and reviewers of high-impact psychology journals: statistical and research design problems in submitted manuscripts.

    Science.gov (United States)

    Harris, Alex; Reeder, Rachelle; Hyun, Jenny

    2011-01-01

    The authors surveyed 21 editors and reviewers from major psychology journals to identify and describe the statistical and design errors they encounter most often and to get their advice regarding prevention of these problems. Content analysis of the text responses revealed themes in 3 major areas: (a) problems with research design and reporting (e.g., lack of an a priori power analysis, lack of congruence between research questions and study design/analysis, failure to adequately describe statistical procedures); (b) inappropriate data analysis (e.g., improper use of analysis of variance, too many statistical tests without adjustments, inadequate strategy for addressing missing data); and (c) misinterpretation of results. If researchers attended to these common methodological and analytic issues, the scientific quality of manuscripts submitted to high-impact psychology journals might be significantly improved.

  11. A Survey of Applications and Research in Integrated Design Systems Technology

    Science.gov (United States)

    1998-01-01

    The initial part of the study was begun with a combination of literature searches, World Wide Web searches, and contacts with individuals and companies who were known to members of our team to have an interest in topics that seemed to be related to our study. There is a long list of such topics, such as concurrent engineering, design for manufacture, life-cycle engineering, systems engineering, systems integration, systems design, design systems, integrated product and process approaches, enterprise integration, integrated product realization, and similar terms. These all capture, at least in part, the flavor of what we describe here as integrated design systems. An inhibiting factor in this inquiry was the absence of agreed terminology for the study of integrated design systems. It is common for the term to be applied to what are essentially augmented Computer-Aided Design (CAD) systems, which are integrated only to the extent that agreements have been reached to attach proprietary extensions to proprietary CAD programs. It is also common for some to use the term integrated design systems to mean a system that applies only, or mainly, to the design phase of a product life cycle. It is likewise common for many of the terms listed earlier to be used as synonyms for integrated design systems. We tried to avoid this ambiguity by adopting the definition of integrated design systems that is implied in the introductory notes that we provided to our contacts, cited earlier. We thus arrived at this definition: Integrated Design Systems refers to the integration of the different tools and processes that comprise the engineering, of complex systems. It takes a broad view of the engineering of systems, to include consideration of the entire product realization process and the product life cycle. An important aspect of integrated design systems is the extent to which they integrate existing, "islands of automation" into a comprehensive design and product realization

  12. Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

    Energy Technology Data Exchange (ETDEWEB)

    Kurnik, Charles W [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baumgartner, Robert [Tetra Tech, Madison, WI (United States)

    2017-10-05

    This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savings from energy efficiency programs.

  13. The APACHE survey hardware and software design: Tools for an automatic search of small-size transiting exoplanets

    Directory of Open Access Journals (Sweden)

    Lattanzi M.G.

    2013-04-01

    Full Text Available Small-size ground-based telescopes can effectively be used to look for transiting rocky planets around nearby low-mass M stars using the photometric transit method, as recently demonstrated for example by the MEarth project. Since 2008 at the Astronomical Observatory of the Autonomous Region of Aosta Valley (OAVdA, we have been preparing for the long-term photometric survey APACHE, aimed at finding transiting small-size planets around thousands of nearby early and mid-M dwarfs. APACHE (A PAthway toward the Characterization of Habitable Earths is designed to use an array of five dedicated and identical 40-cm Ritchey-Chretien telescopes and its observations started at the beginning of summer 2012. The main characteristics of the survey final set up and the preliminary results from the first weeks of observations will be discussed.

  14. Survey on Recent Designs of Compliant Micro-/Nano-Positioning Stages

    Directory of Open Access Journals (Sweden)

    Zeyi Wu

    2018-02-01

    Full Text Available Micromanipulation is a hot topic due to its enabling role in various research fields. In order to perform a high precision operation at a small scale, compliant mechanisms have been proposed and applied for decades. In microscale manipulation, micro-/nano-positioning is the most fundamental operation because a precision positioning is the premise of subsequent operations. This paper is concentrated on reviewing the state-of-the-art research on complaint micro-/nano-positioning stage design in recent years. It involves the major processes and components for designing a compliant positioning stage, e.g., actuator selection, stroke amplifier design, connecting scheme of the multi-DOF stage and structure optimization. The review provides a reference to design a compliant micro-/nano-positioning stage for pertinent applications.

  15. An exploratory survey of design science research amongst South African computing scholars

    CSIR Research Space (South Africa)

    Naidoo, R

    2012-10-01

    Full Text Available The debate ensues as to whether the traditional focus of computing research on theory development and verification and therefore has adequate immediate practical relevance. Despite increasing claims of the potential of design science research (DSR...

  16. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali.

    Science.gov (United States)

    Minetti, Andrea; Riera-Montes, Margarita; Nackers, Fabienne; Roederer, Thomas; Koudika, Marie Hortense; Sekkenes, Johanne; Taconet, Aurore; Fermon, Florence; Touré, Albouhary; Grais, Rebecca F; Checchi, Francesco

    2012-10-12

    Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS) approach has been proposed as an alternative, as smaller sample sizes are required. We explored (i) the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii) the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i) health areas not requiring supplemental activities; ii) health areas requiring additional vaccination; iii) health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3), standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Small sample cluster surveys (10 × 15) are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  17. Performance of small cluster surveys and the clustered LQAS design to estimate local-level vaccination coverage in Mali

    Directory of Open Access Journals (Sweden)

    Minetti Andrea

    2012-10-01

    Full Text Available Abstract Background Estimation of vaccination coverage at the local level is essential to identify communities that may require additional support. Cluster surveys can be used in resource-poor settings, when population figures are inaccurate. To be feasible, cluster samples need to be small, without losing robustness of results. The clustered LQAS (CLQAS approach has been proposed as an alternative, as smaller sample sizes are required. Methods We explored (i the efficiency of cluster surveys of decreasing sample size through bootstrapping analysis and (ii the performance of CLQAS under three alternative sampling plans to classify local VC, using data from a survey carried out in Mali after mass vaccination against meningococcal meningitis group A. Results VC estimates provided by a 10 × 15 cluster survey design were reasonably robust. We used them to classify health areas in three categories and guide mop-up activities: i health areas not requiring supplemental activities; ii health areas requiring additional vaccination; iii health areas requiring further evaluation. As sample size decreased (from 10 × 15 to 10 × 3, standard error of VC and ICC estimates were increasingly unstable. Results of CLQAS simulations were not accurate for most health areas, with an overall risk of misclassification greater than 0.25 in one health area out of three. It was greater than 0.50 in one health area out of two under two of the three sampling plans. Conclusions Small sample cluster surveys (10 × 15 are acceptably robust for classification of VC at local level. We do not recommend the CLQAS method as currently formulated for evaluating vaccination programmes.

  18. THE FMOS-COSMOS SURVEY OF STAR-FORMING GALAXIES AT z ∼ 1.6. III. SURVEY DESIGN, PERFORMANCE, AND SAMPLE CHARACTERISTICS

    Energy Technology Data Exchange (ETDEWEB)

    Silverman, J. D.; Sugiyama, N. [Kavli Institute for the Physics and Mathematics of the Universe (WPI), The University of Tokyo Institutes for Advanced Study, The University of Tokyo, Kashiwa, 277-8583 (Japan); Kashino, D. [Division of Particle and Astrophysical Science, Graduate School of Science, Nagoya University, Nagoya, 464-8602 (Japan); Sanders, D.; Zahid, J.; Kewley, L. J.; Chu, J.; Hasinger, G. [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI, 96822 (United States); Kartaltepe, J. S. [National Optical Astronomy Observatory, 950 N. Cherry Ave., Tucson, AZ, 85719 (United States); Arimoto, N. [Subaru Telescope, 650 North A’ohoku Place, Hilo, Hawaii, 96720 (United States); Renzini, A. [Instituto Nazionale de Astrofisica, Osservatorio Astronomico di Padova, vicolo dell’Osservatorio 5, I-35122, Padova, Italy, EU (Italy); Rodighiero, G.; Baronchelli, I. [Dipartimento di Fisica e Astronomia, Universita di Padova, vicolo Osservatorio, 3, I-35122, Padova (Italy); Daddi, E.; Juneau, S. [Laboratoire AIM, CEA/DSM-CNRS-Universite Paris Diderot, Irfu/Service d’Astrophysique, CEA Saclay (France); Nagao, T. [Graduate School of Science and Engineering, Ehime University, 2-5 Bunkyo-cho, Matsuyama 790-8577 (Japan); Lilly, S. J.; Carollo, C. M. [Institute of Astronomy, ETH Zürich, CH-8093, Zürich (Switzerland); Capak, P. [Spitzer Science Center, California Institute of Technology, Pasadena, CA 91125 (United States); Ilbert, O., E-mail: john.silverman@ipmu.jp [Aix Marseille Université, CNRS, LAM (Laboratoire d’Astrophysique de Marseille) UMR 7326, F-13388, Marseille (France); and others

    2015-09-15

    We present a spectroscopic survey of galaxies in the COSMOS field using the Fiber Multi-object Spectrograph (FMOS), a near-infrared instrument on the Subaru Telescope. Our survey is specifically designed to detect the Hα emission line that falls within the H-band (1.6–1.8 μm) spectroscopic window from star-forming galaxies with 1.4 < z < 1.7 and M{sub stellar} ≳ 10{sup 10} M{sub ⊙}. With the high multiplex capability of FMOS, it is now feasible to construct samples of over 1000 galaxies having spectroscopic redshifts at epochs that were previously challenging. The high-resolution mode (R ∼ 2600) effectively separates Hα and [N ii]λ6585, thus enabling studies of the gas-phase metallicity and photoionization state of the interstellar medium. The primary aim of our program is to establish how star formation depends on stellar mass and environment, both recognized as drivers of galaxy evolution at lower redshifts. In addition to the main galaxy sample, our target selection places priority on those detected in the far-infrared by Herschel/PACS to assess the level of obscured star formation and investigate, in detail, outliers from the star formation rate (SFR)—stellar mass relation. Galaxies with Hα detections are followed up with FMOS observations at shorter wavelengths using the J-long (1.11–1.35 μm) grating to detect Hβ and [O iii]λ5008 which provides an assessment of the extinction required to measure SFRs not hampered by dust, and an indication of embedded active galactic nuclei. With 460 redshifts measured from 1153 spectra, we assess the performance of the instrument with respect to achieving our goals, discuss inherent biases in the sample, and detail the emission-line properties. Our higher-level data products, including catalogs and spectra, are available to the community.

  19. Design, validation, and reliability of survey to measure female athlete triad knowledge among coaches

    Directory of Open Access Journals (Sweden)

    Jillian E. Frideres

    2015-06-01

    Full Text Available The purpose of this study was to design and to test the validity and reliability of an instrument to evaluate coaches' knowledge about the female athlete triad syndrome and their confidence in this knowledge. The instrument collects information regarding: knowledge of the syndrome, components, prevention and intervention; confidence of the coaches in their answers; and coach's characteristics (gender, degree held, years of experience in coaching females, continuing education participation specific to the syndrome and its components, and sport coached. The process of designing the questionnaire and testing the validity and reliability of it was done in four phases: a design and development of the instrument, b content validity, c instrument reliability, and d concurrent validity. The results show that the instrument is suitable for measuring coaches' female athlete triad knowledge. The instrument can contribute to assessing the coaches' knowledge level in relation to this topic.

  20. [Design and implementation of field questionnaire survey system of taeniasis/cysticercosis].

    Science.gov (United States)

    Huan-Zhang, Li; Jing-Bo, Xue; Men-Bao, Qian; Xin-Zhong, Zang; Shang, Xia; Qiang, Wang; Ying-Dan, Chen; Shi-Zhu, Li

    2018-04-17

    A taeniasis/cysticercosis information management system was designed to achieve the dynamic monitoring of the epidemic situation of taeniasis/cysticercosis and improve the intelligence level of disease information management. The system includes three layer structures (application layer, technical core layer, and data storage layer) and designs a datum transmission and remote communication system of traffic information tube in Browser/Server architecture. The system is believed to promote disease datum collection. Additionally, the system may provide the standardized data for convenience of datum analysis.

  1. Survey of Programs Designed to Improve Employee Morale in Seven Major American Shipyards

    National Research Council Canada - National Science Library

    1992-01-01

    ... and therefore his productivity. This study is purposely limited to those employee morale improvement programs which were designed to improve productivity and which in the opinion of management did, in fact, cause an increase in productivity whether or not that increase in productivity is quantifiable.

  2. Optimization in the design and control of robotic manipulators: A survey

    International Nuclear Information System (INIS)

    Rao, S.S.; Bhatti, P.K.

    1989-01-01

    Robotics is a relatively new and evolving technology being applied to manufacturing automation and is fast replacing the special-purpose machines or hard automation as it is often called. Demands for higher productivity, better and uniform quality products, and better working environments are primary reasons for its development. An industrial robot is a multifunctional and computer-controlled mechanical manipulator exhibiting a complex and highly nonlinear behavior. Even though most current robots have anthropomorphic configurations, they have far inferior manipulating abilities compared to humans. A great deal of research effort is presently being directed toward improving their overall performance by using optimal mechanical structures and control strategies. The optimal design of robot manipulators can include kinematic performance characteristics such as workspace, accuracy, repeatability, and redundancy. The static load capacity as well as dynamic criteria such as generalized inertia ellipsoid, dynamic manipulability, and vibratory response have also been considered in the design stages. The optimal control problems typically involve trajectory planning, time-optimal control, energy-optimal control, and mixed-optimal control. The constraints in a robot manipulator design problem usually involve link stresses, actuator torques, elastic deformation of links, and collision avoidance. This paper presents a review of the literature on the issues of optimum design and control of robotic manipulators and also the various optimization techniques currently available for application to robotics

  3. A Survey of Career Guidance Needs of Industrial Design Students in Taiwanese Universities

    Science.gov (United States)

    Yang, Ming-Ying; You, Manlai

    2010-01-01

    School pupils in Taiwan spend most of their time in studying and having examinations, and consequently many of them decide what major to study in universities rather hastily. Industrial design (ID) programs in universities nowadays recruit students from general and vocational senior high schools through a variety of channels. As a consequence, ID…

  4. Diagrams: A Visual Survey of Graphs, Maps, Charts and Diagrams for the Graphic Designer.

    Science.gov (United States)

    Lockwood, Arthur

    Since the ultimate success of any diagram rests in its clarity, it is important that the designer select a method of presentation which will achieve this aim. He should be aware of the various ways in which statistics can be shown diagrammatically, how information can be incorporated in maps, and how events can be plotted in chart or graph form.…

  5. A Survey of Educational Games as Interaction Design Tools for Affective Learning: Thematic Analysis Taxonomy

    Science.gov (United States)

    Yusoff, Zarwina; Kamsin, Amirrudin; Shamshirband, Shahaboddin; Chronopoulos, Anthony T.

    2018-01-01

    A Computer game is the new platform in generating learning experiences for educational purposes. There are many educational games that have been used as an interaction design tool in a learning environment to enhance students learning outcomes. However, research also claims that playing video games can have a negative impact on student behavior,…

  6. Computer Game Theories for Designing Motivating Educational Software: A Survey Study

    Science.gov (United States)

    Ang, Chee Siang; Rao, G. S. V. Radha Krishna

    2008-01-01

    The purpose of this study is to evaluate computer game theories for educational software. We propose a framework for designing engaging educational games based on contemporary game studies which includes ludology and narratology. Ludology focuses on the study of computer games as play and game activities, while narratology revolves around the…

  7. Surveying the Landscape of Professional Development Research: Suggestions for New Perspectives in Design and Research

    Science.gov (United States)

    Manduca, Cathryn A.

    2017-01-01

    Science, technology, engineering, and mathematics (STEM) higher education is in need of improved teaching methods to increase learning for all students. Faculty professional development programs are a widespread strategy for fostering this improvement. Studies of faculty development programs have focused on program design and the impact of…

  8. Literature Survey on Interaction Design and Existing Software Applications for Dyslectic Users

    DEFF Research Database (Denmark)

    Vangeli, Panagiota; Stage, Jan

    2017-01-01

    their reading skills. For the purpose of this research, we initially collected 175 studies, from which we selected, reviewed and made an overview table of 71 studies organized by areas of attention. The literature research on interaction design of systems for dyslectic users resulted in a presentation...

  9. Design and use of concrete pads for the calibration of radiometric survey instrumentation

    International Nuclear Information System (INIS)

    Loevborg, L.

    1984-10-01

    A gamma-ray spectrometer for use in geological exploration possesses four stripping ratios and three window sensitivities which must be determined to make the instrumentation applicable for field assay or airborne measurement of potassium, uranium, and thorium contents in the ground. Survey organizations in many parts of the world perform the instrument calibration using large pads of concrete which simulate a plane ground of known radioelement concentration. Calibration and monitoring trials with twelve facilities in ten countries prove that moisture absorption, radon exhalation, and particle-size effects can offset a radiometric grade assigned to concrete whose aggregate contains an embedded radioactive mineral. These and other calibration problems are discussed from a combined theoretical and practical viewpoint

  10. Methodological issues in the design of online surveys for measuring unethical work behavior: Recommendations on the basis of a split-ballot experiment

    NARCIS (Netherlands)

    Wouters, K.; Maesschalck, J.B.; Peeters, C.F.W.; Rosen, M.

    2014-01-01

    In recent years, there has been an increasing interest in unethical work behavior. Several types of survey instruments to collect information about unethical work behavior are available. Nevertheless, to date little attention has been paid to design issues of those surveys. There are, however,

  11. SABE Colombia: Survey on Health, Well-Being, and Aging in Colombia—Study Design and Protocol

    Science.gov (United States)

    Corchuelo, Jairo; Curcio, Carmen-Lucia; Calzada, Maria-Teresa; Mendez, Fabian

    2016-01-01

    Objective. To describe the design of the SABE Colombia study. The major health study of the old people in Latin America and the Caribbean (LAC) is the Survey on Health, Well-Being, and Aging in LAC, SABE (from initials in Spanish: SAlud, Bienestar & Envejecimiento). Methods. The SABE Colombia is a population-based cross-sectional study on health, aging, and well-being of elderly individuals aged at least 60 years focusing attention on social determinants of health inequities. Methods and design were similar to original LAC SABE. The total sample size of the study at the urban and rural research sites (244 municipalities) was 23.694 elderly Colombians representative of the total population. The study had three components: (1) a questionnaire covering active aging determinants including anthropometry, blood pressure measurement, physical function, and biochemical and hematological measures; (2) a subsample survey among family caregivers; (3) a qualitative study with gender and cultural perspectives of quality of life to understand different dimensions of people meanings. Conclusions. The SABE Colombia is a comprehensive, multidisciplinary study of the elderly with respect to active aging determinants. The results of this study are intended to inform public policies aimed at tackling health inequalities for the aging society in Colombia. PMID:27956896

  12. Advanced power generation systems for the 21st Century: Market survey and recommendations for a design philosophy

    Energy Technology Data Exchange (ETDEWEB)

    Andriulli, J.B.; Gates, A.E.; Haynes, H.D.; Klett, L.B.; Matthews, S.N.; Nawrocki, E.A.; Otaduy, P.J.; Scudiere, M.B.; Theiss, T.J.; Thomas, J.F.; Tolbert, L.M.; Yauss, M.L.; Voltz, C.A.

    1999-11-01

    The purpose of this report is to document the results of a study designed to enhance the performance of future military generator sets (gen-sets) in the medium power range. The study includes a market survey of the state of the art in several key component areas and recommendations comprising a design philosophy for future military gen-sets. The market survey revealed that the commercial market is in a state of flux, but it is currently or will soon be capable of providing the technologies recommended here in a cost-effective manner. The recommendations, if implemented, should result in future power generation systems that are much more functional than today's gen-sets. The number of differing units necessary (both family sizes and frequency modes) to cover the medium power range would be decreased significantly, while the weight and volume of each unit would decrease, improving the transportability of the power source. Improved fuel economy and overall performance would result from more effective utilization of the prime mover in the generator. The units would allow for more flexibility and control, improved reliability, and more effective power management in the field.

  13. Design and operation of the National Survey of Children with Special Health Care Needs, 2009-2010.

    Science.gov (United States)

    Bramlett, Matthew D; Blumberg, Stephen J; Ormson, A Elizabeth; George, Jacquelyn M; Williams, Kim L; Frasier, Alicia M; Skalland, Benjamin J; Santos, Kathleen B; Vsetecka, Danielle M; Morrison, Heather M; Pedlow, Steven; Wang, Fang

    2014-11-01

    This report presents the development, plan, and operation of the 2009-2010 National Survey of Children with Special Health Care Needs, a module of the State and Local Area Integrated Telephone Survey. The survey is conducted by the Centers for Disease Control and Prevention's National Center for Health Statistics. This survey was designed to produce national and state-specific prevalence estimates of children with special health care needs (CSHCN), to describe the types of services that they need and use, and to assess aspects of the system of care for CSHCN. A random-digit-dial sample of households with children under age 18 years was constructed for each of the 50 states and the District of Columbia. The sampling frame consisted of landline phone numbers and cellular(cell) phone numbers of households that reported a cell-phone-only or cell-phone-mainly status. Children in identified households were screened for special health care needs. If CSHCN were identified in the household, a detailed interview was conducted for one randomly selected child with special health care needs. Respondents were parents or guardians who knew about the children's health and health care. A total of 196,159 household screening interviews were completed from July 2009 through March 2011, resulting in 40,242 completed special-needs interviews, including 2,991 from cell-phone interviews. The weighted overall response rate was 43.7% for the landline sample, 15.2% for the cell-phone sample, and 25.5% overall. All material appearing in this report is in the public domain and may be reproduced or copied without permission; citation as to source, however, is appreciated.

  14. A survey on the design of multiprocessing systems for artificial intelligence applications

    Science.gov (United States)

    Wah, Benjamin W.; Li, Guo Jie

    1989-01-01

    Some issues in designing computers for artificial intelligence (AI) processing are discussed. These issues are divided into three levels: the representation level, the control level, and the processor level. The representation level deals with the knowledge and methods used to solve the problem and the means to represent it. The control level is concerned with the detection of dependencies and parallelism in the algorithmic and program representations of the problem, and with the synchronization and sheduling of concurrent tasks. The processor level addresses the hardware and architectural components needed to evaluate the algorithmic and program representations. Solutions for the problems of each level are illustrated by a number of representative systems. Design decisions in existing projects on AI computers are classed into top-down, bottom-up, and middle-out approaches.

  15. Design and Calibration of a Flowfield Survey Rake for Inlet Flight Research

    Science.gov (United States)

    Flynn, Darin C.; Ratnayake, Nalin A.; Frederick, Michael

    2009-01-01

    Flowfield rake was designed to quantify the flowfield for inlet research underneath NASA DFRC s F-15B airplane. Detailed loads and stress analysis performed using CFD and empirical methods to assure structural integrity. Calibration data were generated through wind tunnel testing of the rake. Calibration algorithm was developed to determine the local Mach and flow angularity at each probe. RAGE was flown November, 2008. Data is currently being analyzed.

  16. Enhancing sampling design in mist-net bat surveys by accounting for sample size optimization

    OpenAIRE

    Trevelin, Leonardo Carreira; Novaes, Roberto Leonan Morim; Colas-Rosas, Paul François; Benathar, Thayse Cristhina Melo; Peres, Carlos A.

    2017-01-01

    The advantages of mist-netting, the main technique used in Neotropical bat community studies to date, include logistical implementation, standardization and sampling representativeness. Nonetheless, study designs still have to deal with issues of detectability related to how different species behave and use the environment. Yet there is considerable sampling heterogeneity across available studies in the literature. Here, we approach the problem of sample size optimization. We evaluated the co...

  17. Market Designs : A Survey and Analysis of Methods to Ensure Peak Capacity

    OpenAIRE

    Gullberg, Erik

    2008-01-01

    The production and consumption of electricity must be in balance in order to maintain the frequency in an electrical grid. During peak loads this may be troublesome to achieve due to lack of adequate production capabilities. Competitive electricity markets with price caps have a problem - insufficient revenues for peak production units which lead to mothballing or decommissioning of power plants. Inadequate production capability is solved through design of the electricity markets which render...

  18. Research design and statistical methods in Indian medical journals: a retrospective survey.

    Science.gov (United States)

    Hassan, Shabbeer; Yellur, Rajashree; Subramani, Pooventhan; Adiga, Poornima; Gokhale, Manoj; Iyer, Manasa S; Mayya, Shreemathi S

    2015-01-01

    Good quality medical research generally requires not only an expertise in the chosen medical field of interest but also a sound knowledge of statistical methodology. The number of medical research articles which have been published in Indian medical journals has increased quite substantially in the past decade. The aim of this study was to collate all evidence on study design quality and statistical analyses used in selected leading Indian medical journals. Ten (10) leading Indian medical journals were selected based on impact factors and all original research articles published in 2003 (N = 588) and 2013 (N = 774) were categorized and reviewed. A validated checklist on study design, statistical analyses, results presentation, and interpretation was used for review and evaluation of the articles. Main outcomes considered in the present study were - study design types and their frequencies, error/defects proportion in study design, statistical analyses, and implementation of CONSORT checklist in RCT (randomized clinical trials). From 2003 to 2013: The proportion of erroneous statistical analyses did not decrease (χ2=0.592, Φ=0.027, p=0.4418), 25% (80/320) in 2003 compared to 22.6% (111/490) in 2013. Compared with 2003, significant improvement was seen in 2013; the proportion of papers using statistical tests increased significantly (χ2=26.96, Φ=0.16, pdesign decreased significantly (χ2=16.783, Φ=0.12 pdesigns has remained very low (7.3%, 43/588) with majority showing some errors (41 papers, 95.3%). Majority of the published studies were retrospective in nature both in 2003 [79.1% (465/588)] and in 2013 [78.2% (605/774)]. Major decreases in error proportions were observed in both results presentation (χ2=24.477, Φ=0.17, presearch seems to have made no major progress regarding using correct statistical analyses, but error/defects in study designs have decreased significantly. Randomized clinical trials are quite rarely published and have high proportion of

  19. Self-stigma by people diagnosed with schizophrenia, depression and anxiety: Cross-sectional survey design.

    Science.gov (United States)

    Hasan, Abd Al-Hadi; Musleh, Mahmoud

    2018-04-01

    This study investigated self-attitudes towards schizophrenia, depression and anxiety. A survey was conducted with 564 people with a schizophrenia, depression and anxiety who are currently being treated at a psychiatric clinic in Amman, Jordan. The research found that stigma towards schizophrenia, depression and anxiety was based around three factors: preconceived stereotypes, personal responsibility/blame and the perceived inability of a patient to recover. Schizophrenia, in particular, was linked more strongly to negative stereotypes and an inability to recover and less associated to personal responsibility/blame in comparison to depression and anxiety. Three identical stigma factors emerged for each diagnosis which reflected themes identified in previous literature. People with schizophrenia are seen as more dangerous and less likely to recover than those suffering from other mental illness. Anxiety was seen most favourably by the self; it was associated with less negative stereotypes and seen as more likely to cure. Interestingly, anxiety and depression were seen almost identically. The self-perception of mental health conditions, such as schizophrenia, depression and anxiety, have important implications for the planning of anti-stigma and awareness raising programmes. By gaining a thorough understanding of these perceptions and the rationale behind them, it may be possible to develop effective, tailor-made interventions. © 2017 Wiley Periodicals, Inc.

  20. [Sampling and measurement methods of the protocol design of the China Nine-Province Survey for blindness, visual impairment and cataract surgery].

    Science.gov (United States)

    Zhao, Jia-liang; Wang, Yu; Gao, Xue-cheng; Ellwein, Leon B; Liu, Hu

    2011-09-01

    To design the protocol of the China nine-province survey for blindness, visual impairment and cataract surgery to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery. The protocol design was began after accepting the task for the national survey for blindness, visual impairment and cataract surgery from the Department of Medicine, Ministry of Health, China, in November, 2005. The protocol in Beijing Shunyi Eye Study in 1996 and Guangdong Doumen County Eye Study in 1997, both supported by World Health Organization, was taken as the basis for the protocol design. The relative experts were invited to discuss and prove the draft protocol. An international advisor committee was established to examine and approve the draft protocol. Finally, the survey protocol was checked and approved by the Department of Medicine, Ministry of Health, China and Prevention Program of Blindness and Deafness, WHO. The survey protocol was designed according to the characteristics and the scale of the survey. The contents of the protocol included determination of target population and survey sites, calculation of the sample size, design of the random sampling, composition and organization of the survey teams, determination of the examinee, the flowchart of the field work, survey items and methods, diagnostic criteria of blindness and moderate and sever visual impairment, the measures of the quality control, the methods of the data management. The designed protocol became the standard and practical protocol for the survey to evaluate the prevalence and main causes of blindness and visual impairment, and the prevalence and outcomes of the cataract surgery.

  1. A Survey of Utopia—Creating Filmic Travelogues in Architectural Design Studio Education †

    OpenAIRE

    Johannes Müntinga; Gerlinde Verhaeghe

    2018-01-01

    This paper investigates the potential of the creation of filmic travelogues in architectural design studio education. It looks at student works from a studio conducted at RWTH Aachen University in the summer term of 2017 and explores how the works construct meaning from and reflect on architectural reference in an active creative process. The assignment of the studio was to create a travelogue of a 4-day excursion to Belgium and the South of England in the form of a short film. Inspired by Pa...

  2. State of art survey for design of medium frequency high power transformer

    DEFF Research Database (Denmark)

    Vaisambhayana, Sriram; Dincan, Catalin; Shuyu, Cao

    2016-01-01

    Medium and high frequency, high power transformers play an important role in footprint reduction along with their functions of galvanic isolation, and voltage transformation in all high power converters typically used in traction power systems, offshore wind plant power converters, and solid state...... transformer based distribution system grids. This state of art report analysis the various materials and design tradeoffs that govern the electromagnetic behavior and loss mechanisms of the medium frequency transformer applications. Typical winding and core geometries that have been reported extensively...

  3. A survey of Wien bridge-based chaotic oscillators: Design and experimental issues

    Energy Technology Data Exchange (ETDEWEB)

    Kilic, Recai [Erciyes University, Department of Electrical and Electronic Engineering, 38039 Kayseri (Turkey)], E-mail: kilic@erciyes.edu.tr; Yildirim, Fatma [Erciyes University, Civil Aviation School, 38039 Kayseri (Turkey)

    2008-12-15

    This paper presents a comparative study on design and implementation of Wien type chaotic oscillators. By making a collection of almost all Wien bridge-based chaotic circuits, we have investigated these oscillators in terms of chaotic dynamics, circuit structures, active building blocks, nonlinear element structures and operating frequency by using PSpice simulations and laboratory experiments. In addition to this comparative investigation, we present our two basic experimental contributions to referred implementations. While the first of our experimental contributions consists of the experimentally implementation of CFOA-based Chua's circuit modified for very high chaotic oscillations, the scope of the second is to experimentally implement a Wien type high frequency chaos generator, which has the diode-inductor composite, in the inductorless form by using CFOA-based synthetic inductor.

  4. A survey of Wien bridge-based chaotic oscillators: Design and experimental issues

    International Nuclear Information System (INIS)

    Kilic, Recai; Yildirim, Fatma

    2008-01-01

    This paper presents a comparative study on design and implementation of Wien type chaotic oscillators. By making a collection of almost all Wien bridge-based chaotic circuits, we have investigated these oscillators in terms of chaotic dynamics, circuit structures, active building blocks, nonlinear element structures and operating frequency by using PSpice simulations and laboratory experiments. In addition to this comparative investigation, we present our two basic experimental contributions to referred implementations. While the first of our experimental contributions consists of the experimentally implementation of CFOA-based Chua's circuit modified for very high chaotic oscillations, the scope of the second is to experimentally implement a Wien type high frequency chaos generator, which has the diode-inductor composite, in the inductorless form by using CFOA-based synthetic inductor

  5. Knee complaints and consequences on work status; a 10-year follow-up survey among floor layers and graphic designers.

    Science.gov (United States)

    Rytter, Søren; Jensen, Lilli Kirkeskov; Bonde, Jens Peter

    2007-09-18

    The purpose of the study was to examine if knee complaints among floor layers predict exclusion from the trade. In 1994/95 self-reported data were obtained from a cohort of floor layers and graphic designers with and without knee straining work activities, respectively. At follow-up in 2005 the questionnaire survey was repeated. The study population consisted of 81 floor layers and 173 graphic designers who were presently working in their trades at baseline (1995). All participants were men aged 36-70 years in 2005. We computed the risk of losing gainful employment in the trade according to occurrence of knee complaints at baseline, using Cox proportional hazard regression adjusted for a number of potential confounding variables. Moreover, the crude and adjusted odds risk ratio for knee complaints according to status of employment in the trade were computed, using graphic designers as reference. A positive but non-significant association between knee complaints lasting more than 30 days the past 12 months and exclusion from the trade was found among floor layers (Hazard Ratio = 1.4, 95% CI = 0.6-3.5).The frequency of self-reported knee complaints was lower among floor layers presently at work in the trade in year 2005 (26.3%) compared with baseline in 1995 (41.1%), while the opposite tendency was seen among graphic designers (20.7% vs. 10.7%). The study suggests that knee complaints are a risk factor for premature exclusion from a knee demanding trade. However, low power of the study precludes strong conclusions. The study also indicates a healthy worker effect among floor layers and a survivor effect among graphic designers.

  6. Mixing modes in a population-based interview survey: comparison of a sequential and a concurrent mixed-mode design for public health research.

    Science.gov (United States)

    Mauz, Elvira; von der Lippe, Elena; Allen, Jennifer; Schilling, Ralph; Müters, Stephan; Hoebel, Jens; Schmich, Patrick; Wetzstein, Matthias; Kamtsiuris, Panagiotis; Lange, Cornelia

    2018-01-01

    Population-based surveys currently face the problem of decreasing response rates. Mixed-mode designs are now being implemented more often to account for this, to improve sample composition and to reduce overall costs. This study examines whether a concurrent or sequential mixed-mode design achieves better results on a number of indicators of survey quality. Data were obtained from a population-based health interview survey of adults in Germany that was conducted as a methodological pilot study as part of the German Health Update (GEDA). Participants were randomly allocated to one of two surveys; each of the surveys had a different design. In the concurrent mixed-mode design ( n  = 617) two types of self-administered questionnaires (SAQ-Web and SAQ-Paper) and computer-assisted telephone interviewing were offered simultaneously to the respondents along with the invitation to participate. In the sequential mixed-mode design ( n  = 561), SAQ-Web was initially provided, followed by SAQ-Paper, with an option for a telephone interview being sent out together with the reminders at a later date. Finally, this study compared the response rates, sample composition, health indicators, item non-response, the scope of fieldwork and the costs of both designs. No systematic differences were identified between the two mixed-mode designs in terms of response rates, the socio-demographic characteristics of the achieved samples, or the prevalence rates of the health indicators under study. The sequential design gained a higher rate of online respondents. Very few telephone interviews were conducted for either design. With regard to data quality, the sequential design (which had more online respondents) showed less item non-response. There were minor differences between the designs in terms of their costs. Postage and printing costs were lower in the concurrent design, but labour costs were lower in the sequential design. No differences in health indicators were found between

  7. A survey of nicotine yields in small cigar smoke: influence of cigar design and smoking regimens.

    Science.gov (United States)

    Goel, Reema; Trushin, Neil; Reilly, Samantha M; Bitzer, Zachary; Muscat, Joshua; Foulds, Jonathan; Richie, John P

    2017-09-27

    While the popularity of small cigar brands that resemble cigarettes, including both little cigars (LC) and filtered cigars (FC), has been on the rise, little is known about the delivery of nicotine from these products. Our objective was to determine the nicotine yields of small cigars in comparison to cigarettes. Nicotine yields from LC, FC and 3R4F and 1R6F research cigarettes were determined from mainstream smoke generated on a smoking machine under the International Organization of Standardization (ISO) and Canadian Intense (CI) methods. Market characteristics (price and package label) and physical features (filter ventilation, product weight, and filter weight, product length and diameter) were also determined for 8 brands of small cigars. Nicotine yields in small cigars averaged 1.24 and 3.49 mg/unit on ISO and CI regimens, respectively, compared to 0.73 and 2.35 mg/unit, respectively, for the research cigarettes. Nicotine yields per puff were similar between small cigars and cigarettes. We also found that FC did not differ from LC in nicotine yields. FC and LC differ from each other in many physical design features (unit weight, filter weight, filter length), but are similar in others (unit length, diameter, filter ventilation). Nicotine delivery from small cigars is similar to or greater than that from cigarettes. Thus, for future research and regulatory purposes, standard definitions need to be developed for small cigars, and FC and LC should be evaluated as separate entities. Small cigars are similar to cigarettes in their design and use. While nicotine yields per puff were similar between products, small cigars delivered substantially higher amounts of nicotine per unit than cigarettes. These findings support the growing body of evidence to justify regulating all small cigars, including little and filtered cigars in a similar fashion as cigarettes. © The Author 2017. Published by Oxford University Press on behalf of the Society for Research on Nicotine

  8. Design and methods in a survey of living conditions in the Arctic - the SLiCA study.

    Science.gov (United States)

    Eliassen, Bent-Martin; Melhus, Marita; Kruse, Jack; Poppel, Birger; Broderstad, Ann Ragnhild

    2012-03-19

    The main objective of this study is to describe the methods and design of the survey of living conditions in the Arctic (SLiCA), relevant participation rates and the distribution of participants, as applicable to the survey data in Alaska, Greenland and Norway. This article briefly addresses possible selection bias in the data and also the ways to tackle it in future studies. Population-based cross-sectional survey. Indigenous individuals aged 16 years and older, living in Greenland, Alaska and in traditional settlement areas in Norway, were invited to participate. Random sampling methods were applied in Alaska and Greenland, while non-probability sampling methods were applied in Norway. Data were collected in 3 periods: in Alaska, from January 2002 to February 2003; in Greenland, from December 2003 to August 2006; and in Norway, in 2003 and from June 2006 to June 2008. The principal method in SLiCA was standardised face-to-face interviews using a questionnaire. A total of 663, 1,197 and 445 individuals were interviewed in Alaska, Greenland and Norway, respectively. Very high overall participation rates of 83% were obtained in Greenland and Alaska, while a more conventional rate of 57% was achieved in Norway. A predominance of female respondents was obtained in Alaska. Overall, the Sami cohort is older than the cohorts from Greenland and Alaska. Preliminary assessments suggest that selection bias in the Sami sample is plausible but not a major threat. Few or no threats to validity are detected in the data from Alaska and Greenland. Despite different sampling and recruitment methods, and sociocultural differences, a unique database has been generated, which shall be used to explore relationships between health and other living conditions variables.

  9. Designing and Testing a UAV Mapping System for Agricultural Field Surveying

    Directory of Open Access Journals (Sweden)

    Martin Peter Christiansen

    2017-11-01

    Full Text Available A Light Detection and Ranging (LiDAR sensor mounted on an Unmanned Aerial Vehicle (UAV can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS and Inertial Measurement Unit (IMU sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35–0.58 m are correlated to the applied nitrogen treatments of 0–300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS and the Point Cloud Library (PCL. Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  10. Designing and Testing a UAV Mapping System for Agricultural Field Surveying.

    Science.gov (United States)

    Christiansen, Martin Peter; Laursen, Morten Stigaard; Jørgensen, Rasmus Nyholm; Skovsen, Søren; Gislum, René

    2017-11-23

    A Light Detection and Ranging (LiDAR) sensor mounted on an Unmanned Aerial Vehicle (UAV) can map the overflown environment in point clouds. Mapped canopy heights allow for the estimation of crop biomass in agriculture. The work presented in this paper contributes to sensory UAV setup design for mapping and textual analysis of agricultural fields. LiDAR data are combined with data from Global Navigation Satellite System (GNSS) and Inertial Measurement Unit (IMU) sensors to conduct environment mapping for point clouds. The proposed method facilitates LiDAR recordings in an experimental winter wheat field. Crop height estimates ranging from 0.35-0.58 m are correlated to the applied nitrogen treatments of 0-300 kg N ha . The LiDAR point clouds are recorded, mapped, and analysed using the functionalities of the Robot Operating System (ROS) and the Point Cloud Library (PCL). Crop volume estimation is based on a voxel grid with a spatial resolution of 0.04 × 0.04 × 0.001 m. Two different flight patterns are evaluated at an altitude of 6 m to determine the impacts of the mapped LiDAR measurements on crop volume estimations.

  11. Nationwide survey, assessment, and replacement designs of tank systems at 430 emergency broadcast stations

    International Nuclear Information System (INIS)

    Maraj, R.; Whitaker-Sheppard, L.

    1994-01-01

    The Federal Emergency Management Agency (FEMA), acting on behalf of the Federal Communications Commission (FCC), undertook a program to bring into compliance federally-owned underground storage tanks (USTs) at radio and television stations, which are part of the Broadcast Station Protection Program (BSPP) of the Emergency Broadcast System (EBS). These USTs supply fuel (diesel and gasoline) to emergency generators and are located on private property. Woodward-Clyde Federal Services is under contract with FEMA to provide assistance in all phases of the program. The BSPP is designed to protect selected stations that are participants in the EBS, which support emergency preparedness and response operations. Technical standards for installation, spill and overfill protection, corrosion protection, and leak detection for underground storage tanks (UST) were promulgated by the EPA, as described in 53 Federal Register 37082 (September 23, 1988). December 1998 was established as a compliance data for corrosion protection and spill/overfill protection. A compliance period of December 1989 to December 1993 was established for leak detection devices, depending on the UST installation date. Several states have promulgated underground storage tank regulations that are more stringent than the federal requirements. Local agencies in several states may have additional UST requirements. All federal, state, and local UST requirements must be satisfied under a compliance program. The approach and methodology employed by FEMA are presented

  12. [Design and implementation of Chinese materia medica resources survey results display system].

    Science.gov (United States)

    Wang, Hui; Zhang, Xiao-Bo; Ge, Xiao-Guang; Jin, Yan; Wang, Ling; Zhao, Yan-Ping; Jing, Zhi-Xian; Guo, Lan-Ping; Huang, Lu-Qi

    2017-11-01

    From the beginning of the fourth national census of traditional Chinese medicine resources in 2011, a large amount of data have been collected and compiled, including wild medicinal plant resource data, cultivation of medicinal plant information, traditional knowledge, and specimen information. The traditional paper-based recording method is inconvenient for query and application. The B/S architecture, JavaWeb framework and SOA are used to design and develop the fourth national census results display platform. Through the data integration and sorting, the users are to provide with integrated data services and data query display solutions. The platform realizes the fine data classification, and has the simple data retrieval and the university statistical analysis function. The platform uses Echarts components, Geo Server, Open Layers and other technologies to provide a variety of data display forms such as charts, maps and other visualization forms, intuitive reflects the number, distribution and type of Chinese material medica resources. It meets the data mapping requirements of different levels of users, and provides support for management decision-making. Copyright© by the Chinese Pharmaceutical Association.

  13. The Norwegian Offender Mental Health and Addiction Study – Design and Implementation of a National Survey and Prospective Cohort Study

    Directory of Open Access Journals (Sweden)

    Anne Bukten

    2015-01-01

    Full Text Available The Norwegian prison inmates are burdened by problems before they enter prison. Few studies have managed to assess this burden and relate it to what occurs for the inmates once they leave the prison. The Norwegian Offender Mental Health and Addiction (NorMA study is a large-scale longitudinal cohort study that combines national survey and registry data in order to understand mental health, substance use, and criminal activity before, during, and after custody among prisoners in Norway. The main goal of the study is to describe the criminal and health-related trajectories based on both survey and registry linkage information. Data were collected from 1,499 inmates in Norwegian prison facilities during 2013–2014. Of these, 741 inmates provided a valid personal identification number and constitute a cohort that will be examined retrospectively and prospectively, along with data from nationwide Norwegian registries. This study describes the design, procedures, and implementation of the ongoing NorMA study and provides an outline of the initial data.

  14. Prevalence of coronary artery disease and coronary risk factors in Kerala, South India: A population surveyDesign and methods

    Directory of Open Access Journals (Sweden)

    Geevar Zachariah

    2013-05-01

    Methods: The design of the study was cross-sectional population survey. We estimated the sample size based on an anticipated prevalence of 7.4% of CAD for rural and 11% for urban Kerala. The derived sample sizes for rural and urban areas were 3000 and 2400, respectively. The urban areas for sampling constituted one ward each from three municipal corporations at different parts of the state. The rural sample was drawn from two panchayats each in the same districts as the urban sample. One adult from each household in the age group of 20–59 years was selected using Kish method. All subjects between 60 and 79 years were included from each household. A detailed questionnaire was administered to assess the risk factors, history of CAD, family history, educational status, socioeconomic status, dietary habits, physical activity and treatment for CAD; anthropometric measurements, blood pressure, electrocardiogram and fasting blood levels of glucose and lipids were recorded.

  15. Design of a Mars Airplane Propulsion System for the Aerial Regional-Scale Environmental Survey (ARES) Mission Concept

    Science.gov (United States)

    Kuhl. Christopher A.

    2009-01-01

    The Aerial Regional-Scale Environmental Survey (ARES) is a Mars exploration mission concept with the goal of taking scientific measurements of the atmosphere, surface, and subsurface of Mars by using an airplane as the payload platform. ARES team first conducted a Phase-A study for a 2007 launch opportunity, which was completed in May 2003. Following this study, significant efforts were undertaken to reduce the risk of the atmospheric flight system, under the NASA Langley Planetary Airplane Risk Reduction Project. The concept was then proposed to the Mars Scout program in 2006 for a 2011 launch opportunity. This paper summarizes the design and development of the ARES airplane propulsion subsystem beginning with the inception of the ARES project in 2002 through the submittal of the Mars Scout proposal in July 2006.

  16. Lecture Hall and Learning Design: A Survey of Variables, Parameters, Criteria and Interrelationships for Audio-Visual Presentation Systems and Audience Reception.

    Science.gov (United States)

    Justin, J. Karl

    Variables and parameters affecting architectural planning and audiovisual systems selection for lecture halls and other learning spaces are surveyed. Interrelationships of factors are discussed, including--(1) design requirements for modern educational techniques as differentiated from cinema, theater or auditorium design, (2) general hall…

  17. Design and analysis of questionnaires for survey skills in chemical engineering

    Directory of Open Access Journals (Sweden)

    Susana Lucas

    2011-09-01

    Full Text Available 800x600 Normal 0 21 false false false CA X-NONE X-NONE The new reorganization of university education has involved relevant changes in teaching and learning methodologies in order to help students to learn more effectively and to develop important skills and competences demanded by the professional world. In this sense the new configuration of the degree in Chemical Engineering required the identification of the main general and transferable skills, the implementation of the new teaching and learning strategies necessary to achieve them and, in addition, an evaluation procedure for determining the importance and the degree of development of a student´s skills and competences. In this exercise, two obligatory chemical reactor engineering subjects of the still in effect Chemical Engineering degree were chosen as examples of competence-based learning disciplines. For each one, a significant group of transferable and specific skills were selected to be developed. The identification and selection of skills was made according to the recommendations of the European Federation of Chemical Engineering (EFCE together with the established requirements in the ministerial order for the new Chemical Engineering Degree (Ministerial order CIN/351/2009. In order to check the effectiveness of teaching strategies in helping students to acquire these abilities, specific questionnaires were designed. These tests allowed for the utility of the competences in question to be evaluated in terms of the students´ professional work as future chemical engineering graduates and also facilitated the perception of skill development acquired through the methodology implemented in these subjects. The results of the skill evaluation questionnaires revealed the importance that both university collectives (students and professors give to the development of transferable skills. These skills included the ability to communicate effectively (including in English, to work in

  18. Total Survey Error for Longitudinal Surveys

    NARCIS (Netherlands)

    Lynn, Peter; Lugtig, P.J.

    2016-01-01

    This article describes the application of the total survey error paradigm to longitudinal surveys. Several aspects of survey error, and of the interactions between different types of error, are distinct in the longitudinal survey context. Furthermore, error trade-off decisions in survey design and

  19. Leading survey and research report for fiscal 1999. Survey and research on advanced design technology for electronic system; 1999 nendo electronics kiki sekkeiryoku kyoka gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The efforts center on techniques for optimizing the designing process of the system-on-chip (SoC) which assumes the most important part in the technology involved. An SoC is a system in which most of the system-constituting functions are integrated on a single chip, whose design is growing increasingly difficult to prepare because its circuitry containing complicated functions is growing larger in scale at an annual rate of 58%. Its elements are growing microstructural at a sharp pace, and a very optimum designing technique is required to deal with the development. Under the circumstances, the numbers of engineers and man-hours required to cope with the situation are increasing exponentially. The improvement of design productivity at the present time stays at a low annual rate of 21%. Surveyed are the background, objective, and necessity of the research and development of technologies for the whole designing process consisting of the function designing stage which is of the highest level, the logical circuit designing stage, and the manufacturing process designing stage. Furthermore, the current status, research, and development of related technologies and the status of related patents in Japan and overseas are surveyed. Studies are also conducted about the goals of technologies to be developed and about breakthrough points before achieving the goals, and a development project is assumed and proposed. (NEDO)

  20. SCIENTIFIC SUPPORT OF SURVEY, DESIGN, CONSTRUCTION AND OPERATION OF THE MOTHER OF GOD DITCH OF SERAPHIMO-DIVEEVSKY MONASTERY

    Directory of Open Access Journals (Sweden)

    Darchiya Valentina Ivanovna

    2018-02-01

    Full Text Available Subject: the article describes the structure, technologies of construction, gardening and exploitation of the Holy Trinity Seraphimo-Diveevsky Monastery - the ancient linear fortification consisting of a ditch and an earth embankment that is located directly above the ditch. Research objectives: ensure the stability of slopes, create a technique for gardening of steep slopes in difficult microclimatic conditions, ensure drainage of water. Materials and methods: the computational techniques were used to ensure stability of slopes, and experimental techniques were applied for their phyto-fixation; geosynthetics, rebar grids, varietal herbs, gooseberries and thuja were used. Results: for recreation of the unique structure, a special set of design, survey and construction works was developed, as well as works to maintain the structure during its exploitation. In particular, we have developed the method of detection of the recreated ditch based on the stratification of bulk soils by their age; the methods for fastening the slopes; lawn grass mixture formula for slopes with angles of 45° and 65°; drainage system. Conclusions: owing to the research work, for the first time this construction was completed with the required parameters, while the earlier recreation attempts failed due to erosion and landslide processes. The developed methods can be applied for recreation of other ancient defensive fortifications on the fields of great battles and for landscaping the territories with complex relief.

  1. The Cornella Health Interview Survey Follow-Up (CHIS.FU Study: design, methods, and response rate

    Directory of Open Access Journals (Sweden)

    Perez Gloria

    2003-03-01

    Full Text Available Abstract Background The aim of this report is to describe the main characteristics of the design, including response rates, of the Cornella Health Interview Survey Follow-up Study. Methods The original cohort consisted of 2,500 subjects (1,263 women and 1,237 men interviewed as part of the 1994 Cornella Health Interview Study. A record linkage to update the address and vital status of the cohort members was carried out using, first a deterministic method, and secondly a probabilistic one, based on each subject's first name and surnames. Subsequently, we attempted to locate the cohort members to conduct the phone follow-up interviews. A pilot study was carried out to test the overall feasibility and to modify some procedures before the field work began. Results After record linkage, 2,468 (98.7% subjects were successfully traced. Of these, 91 (3.6% were deceased, 259 (10.3% had moved to other towns, and 50 (2.0% had neither renewed their last municipal census documents nor declared having moved. After using different strategies to track and to retain cohort members, we traced 92% of the CHIS participants. From them, 1,605 subjects answered the follow-up questionnaire. Conclusion The computerized record linkage maximized the success of the follow-up that was carried out 7 years after the baseline interview. The pilot study was useful to increase the efficiency in tracing and interviewing the respondents.

  2. Sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants: A case study in Rwanda.

    Science.gov (United States)

    Lu, Chunling; Liu, Kai; Li, Lingling; Yang, Yuhong

    2017-04-01

    Reliable and comparable information on households with catastrophic health expenditure (HCHE) is crucial for monitoring and evaluating our progress towards achieving universal financial risk protection. This study aims to investigate the sensitivity of measuring the progress in financial risk protection to survey design and its socioeconomic and demographic determinants. Using the Rwanda Integrated Living Conditions Survey in 2005 and 2010/2011, we derived the level and trend of the percentage of the HCHE using out-of-pocket health spending data derived from (1) a health module with a two-week recall period and six (2005)/seven (2010/2011) survey questions (Method 1) and (2) a consumption module with a four-week/ten-/12-month recall period and 11(2005)/24 (2010/2011) questions (Method 2). Using multilevel logistic regression analysis, we investigated the household socioeconomic and demographic characteristics that affected the sensitivity of estimating the HCHE to survey design. We found that Method 1 generated a significantly higher HCHE estimate (9.2%, 95% confidence interval 8.4%-10.0%) than Method2 (7.4%, 6.6%-8.1%) in 2005 and lower estimate (5.6%, 5.2%-6.1%) than Method 2 (8.2%, 7.6%-8.7%) in 2010/2011. The estimated trends of the HCHE using the two methods were not consistent between the two years. A household's size, its income quintile, having no under-five children, and educational level of its head were positively associated with the consistency of its HCHE status when using the two survey methods. Estimates of the progress in financial risk protection, especially among the most vulnerable households, are sensitive to survey design. These results are robust to various thresholds of catastrophic health spending. Future work must focus on mitigating survey effects through the development of statistical tools. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Management and design of hospital pens relative to behavior of the compromised dairy cow: A questionnaire survey of Iowa dairy farms

    DEFF Research Database (Denmark)

    Fogsgaard, Katrine Kop; Herskin, Mette S.; Gorden, Patrick J.

    2016-01-01

    on best prac-tices for housing and management of compromised cows. The purpose of this study was to providedescriptive information about management and husbandry practices of compromised cows on dairyfarms in Iowa. A questionnaire-based survey was designed to examine demographic information, designand...

  4. Design of Gravity Survey Network using Fractal Theory to Delineate Hydrocarbon bearing Jabera Structure, Vindhyan Basin, Central India

    Science.gov (United States)

    Dimri, V. P.; Srivastava, R. P.; Vedanti, N.

    2006-12-01

    A gravity survey network was designed using fractal dimension analysis to delineate a domal structure (Jabera dome) reported in southeastern part of the Vindhyan basin, Central India. This area is also regarded as a `high risk-high reward' frontier area for hydrocarbon exploration in previous studies, hence our aim was to delineate shape and lateral extent of the reported domal structure. Based on the synthetic grid, designed using the concept of fractal dimension, gravity data is collected in Jabera-Damoh area of Vindhyan basin. The collected data is random, but the data density is significant, hence the data points are sorted in a way so that they are close to the synthetic grid points of given grid interval. After sorting the data, again the fractal dimension analysis using box counting method has been carried out to avoid the aliasing in the data due to interpolation and also to know the optimum number of data points sufficient for desired quality of Bouguer anomaly maps. Optimization of number of stations takes care of time and cost involved in the survey and the detectibility limit ensures that the data collected is good enough to resolve the target body under study. The fractal dimension analysis gives clue to select these parameters. It showed that it is always preferable to have well distributed station locations instead of clustering the observation points at some geologically known feature because clustering of data points below required station spacing is not going to add much information where as equally distributed observation points add the information. The study area lies in a difficult terrain of Vindhayn basin, hence according to the accessibility, fractal dimension analysis of the real data sorted approximately at regular grid intervals on 2,3, and 4 km has been done and using the concept of optimum gridding interval Bouguer anomaly maps of the region are prepared. The preliminary depth values of the major interfaces in the area were obtained

  5. Geothermal energy as a source of electricity. A worldwide survey of the design and operation of geothermal power plants

    Energy Technology Data Exchange (ETDEWEB)

    DiPippo, R.

    1980-01-01

    An overview of geothermal power generation is presented. A survey of geothermal power plants is given for the following countries: China, El Salvador, Iceland, Italy, Japan, Mexico, New Zealand, Philippines, Turkey, USSR, and USA. A survey of countries planning geothermal power plants is included. (MHR)

  6. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    This publication is unique in its demystification and operationalization of the complex and elusive nature of the design process. The publication portrays the designer’s daily work and the creative process, which the designer is a part of. Apart from displaying the designer’s work methods...... and design parameters, the publication shows examples from renowned Danish design firms. Through these examples the reader gets an insight into the designer’s reality....

  7. Inclusion of mobile phone numbers into an ongoing population health survey in New South Wales, Australia: design, methods, call outcomes, costs and sample representativeness.

    Science.gov (United States)

    Barr, Margo L; van Ritten, Jason J; Steel, David G; Thackway, Sarah V

    2012-11-22

    In Australia telephone surveys have been the method of choice for ongoing jurisdictional population health surveys. Although it was estimated in 2011 that nearly 20% of the Australian population were mobile-only phone users, the inclusion of mobile phone numbers into these existing landline population health surveys has not occurred. This paper describes the methods used for the inclusion of mobile phone numbers into an existing ongoing landline random digit dialling (RDD) health survey in an Australian state, the New South Wales Population Health Survey (NSWPHS). This paper also compares the call outcomes, costs and the representativeness of the resultant sample to that of the previous landline sample. After examining several mobile phone pilot studies conducted in Australia and possible sample designs (screening dual-frame and overlapping dual-frame), mobile phone numbers were included into the NSWPHS using an overlapping dual-frame design. Data collection was consistent, where possible, with the previous years' landline RDD phone surveys and between frames. Survey operational data for the frames were compared and combined. Demographic information from the interview data for mobile-only phone users, both, and total were compared to the landline frame using χ2 tests. Demographic information for each frame, landline and the mobile-only (equivalent to a screening dual frame design), and the frames combined (with appropriate overlap adjustment) were compared to the NSW demographic profile from the 2011 census using χ2 tests. In the first quarter of 2012, 3395 interviews were completed with 2171 respondents (63.9%) from the landline frame (17.6% landline only) and 1224 (36.1%) from the mobile frame (25.8% mobile only). Overall combined response, contact and cooperation rates were 33.1%, 65.1% and 72.2% respectively. As expected from previous research, the demographic profile of the mobile-only phone respondents differed most (more that were young, males, Aboriginal

  8. Design of the Digital Sky Survey DA and online system: A case history in the use of computer aided tools for data acquisition system design

    Science.gov (United States)

    Petravick, D.; Berman, E.; Nicinski, T.; Rechenmacher, R.; Oleynik, G.; Pordes, R.; Stoughton, C.

    1991-06-01

    As part of its expanding Astrophysics program, Fermilab is participating in the Digital Sky Survey (DSS). Fermilab is part of a collaboration involving University of Chicago, Princeton University, and the Institute of Advanced Studies (at Princeton). The DSS main results will be a photometric imaging survey and a redshift survey of galaxies and color-selected quasars over pi steradians of the Northern Galactic Cap. This paper focuses on our use of Computer Aided Software Engineering (CASE) in specifying the data system for DSS. Extensions to standard methodologies were necessary to compensate for tool shortcomings and to improve communication amongst the collaboration members. One such important extension was the incorporation of CASE information into the specification document.

  9. Design-considerations For A Ground-based Transit Survey To Find Habitable Planets Around L And T Dwarfs

    Science.gov (United States)

    Tata, Ramarao; Martin, E.

    2011-09-01

    Detection of planets in the habitable zone is one of the key drivers of the exoplanet science community. We present a detailed strategy for such detection around L and T dwarfs. We plan to implement the outcome of the analysis as a transit survey to search for planets around known L and T dwarfs. Understanding of the variability of these cool objects will be a worth-while byproduct of such a survey.

  10. The use of operator surveys by the CEGB to evaluate nuclear control room design and initiatives in the design of alarm systems and control room operating procedures

    International Nuclear Information System (INIS)

    Jackson, A.R.G.

    1988-01-01

    This paper reports on the use of operator surveys and trip report analysis methods which the Central Electricity Generating Board has developed to assess the extent and adequacy of operator support systems currently installed on its four twin-reactor, first generation Advanced Gas Cooled Reactor nuclear power plants. The survey consisted of a programme of structured interviews with control room engineers. The scope of the questions addressed; working environment, communications, man-machine interface, procedural information, and the diagnostic and predictive support system. The analysis of trip reports was targetted at identifying aspects of the performance of the operator support systems which might have been contributory to the cause of reactor trip. The results of this work are being used to assist in determining guidelines for the development of operator support systems, computerised controls and the structure of station operating procedures

  11. An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals.

    Science.gov (United States)

    Parsons, Nick R; Price, Charlotte L; Hiskens, Richard; Achten, Juul; Costa, Matthew L

    2012-04-25

    The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10-26%) of the studies investigated the conclusions were not clearly justified by the results, in 39% (30-49%) of studies a different analysis should have been undertaken and in 17% (10-26%) a different analysis could have made a difference to the overall conclusions. It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

  12. An evaluation of the quality of statistical design and analysis of published medical research: results from a systematic survey of general orthopaedic journals

    Directory of Open Access Journals (Sweden)

    Parsons Nick R

    2012-04-01

    Full Text Available Abstract Background The application of statistics in reported research in trauma and orthopaedic surgery has become ever more important and complex. Despite the extensive use of statistical analysis, it is still a subject which is often not conceptually well understood, resulting in clear methodological flaws and inadequate reporting in many papers. Methods A detailed statistical survey sampled 100 representative orthopaedic papers using a validated questionnaire that assessed the quality of the trial design and statistical analysis methods. Results The survey found evidence of failings in study design, statistical methodology and presentation of the results. Overall, in 17% (95% confidence interval; 10–26% of the studies investigated the conclusions were not clearly justified by the results, in 39% (30–49% of studies a different analysis should have been undertaken and in 17% (10–26% a different analysis could have made a difference to the overall conclusions. Conclusion It is only by an improved dialogue between statistician, clinician, reviewer and journal editor that the failings in design methodology and analysis highlighted by this survey can be addressed.

  13. Web-Face-to-Face Mixed-Mode Design in a Longitudinal Survey: Effects on Participation Rates, Sample Composition, and Costs

    Directory of Open Access Journals (Sweden)

    Bianchi Annamaria

    2017-06-01

    Full Text Available Sequential mixed-mode designs are increasingly considered as an alternative to interviewer-administered data collection, allowing researchers to take advantage of the benefits of each mode. We assess the effects of the introduction of a sequential web-face-to-face mixed-mode design over three waves of a longitudinal survey in which members were previously interviewed face-to-face. Findings are reported from a large-scale randomised experiment carried out on the UK Household Longitudinal Study. No differences are found between the mixed-mode design and face-to-face design in terms of cumulative response rates and only minimal differences in terms of sample composition. On the other hand, potential cost savings are evident.

  14. Mapping indoor radon-222 in Denmark: Design and test of the statistical model used in the second nationwide survey

    DEFF Research Database (Denmark)

    Andersen, C.E.; Ulbak, K.; Damkjær, A.

    2001-01-01

    In Denmark, a new survey of indoor radon-222 has been carried out. 1-year alpha track measurements (CR-39) have been made in 3019 single-family houses. There are from 3 to 23 house measurements in each of the 275 municipalities. Within each municipality, houses have been selected randomly. One...... important outcome of the survey is the prediction of the fraction of houses in each municipality with an annual average radon concentration above 200 Bq m(-3). To obtain the most accurate estimate and to assess the associated uncertainties, a statistical model has been developed. The purpose of this paper...

  15. EuropeaN Energy balance Research to prevent excessive weight Gain among Youth (ENERGY project: Design and methodology of the ENERGY cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Moreno Luis

    2011-01-01

    Full Text Available Abstract Background Obesity treatment is by large ineffective long term, and more emphasis on the prevention of excessive weight gain in childhood and adolescence is warranted. To inform energy balance related behaviour (EBRB change interventions, insight in the potential personal, family and school environmental correlates of these behaviours is needed. Studies on such multilevel correlates of EBRB among schoolchildren in Europe are lacking. The ENERGY survey aims to (1 provide up-to-date prevalence rates of measured overweight, obesity, self-reported engagement in EBRBs, and objective accelerometer-based assessment of physical activity and sedentary behaviour and blood-sample biomarkers of metabolic function in countries in different regions of Europe, (2 to identify personal, family and school environmental correlates of these EBRBs. This paper describes the design, methodology and protocol of the survey. Method/Design A school-based cross-sectional survey was carried out in 2010 in seven different European countries; Belgium, Greece, Hungary, the Netherlands, Norway, Slovenia, and Spain. The survey included measurements of anthropometrics, child, parent and school-staff questionnaires, and school observations to measure and assess outcomes (i.e. height, weight, and waist circumference, EBRBs and potential personal, family and school environmental correlates of these behaviours including the social-cultural, physical, political, and economic environmental factors. In addition, a selection of countries conducted accelerometer measurements to objectively assess physical activity and sedentary behaviour, and collected blood samples to assess several biomarkers of metabolic function. Discussion The ENERGY survey is a comprehensive cross-sectional study measuring anthropometrics and biomarkers as well as assessing a range of EBRBs and their potential correlates at the personal, family and school level, among 10-12 year old children in seven

  16. Design

    DEFF Research Database (Denmark)

    Volf, Mette

    Design - proces & metode iBog®  er enestående i sit fokus på afmystificering og operationalisering af designprocessens flygtige og komplekse karakter. Udgivelsen går bag om designerens daglige arbejde og giver et indblik i den kreative skabelsesproces, som designeren er en del af. Udover et bredt...... indblik i designerens arbejdsmetoder og designparametre giver Design - proces & metode en række eksempler fra anerkendte designvirksomheder, der gør det muligt at komme helt tæt på designerens virkelighed....

  17. Using FOSM-Based Data Worth Analyses to Design Geophysical Surveys to Reduce Uncertainty in a Regional Groundwater Model Update

    Science.gov (United States)

    Smith, B. D.; White, J.; Kress, W. H.; Clark, B. R.; Barlow, J.

    2016-12-01

    Hydrogeophysical surveys have become an integral part of understanding hydrogeological frameworks used in groundwater models. Regional models cover a large area where water well data is, at best, scattered and irregular. Since budgets are finite, priorities must be assigned to select optimal areas for geophysical surveys. For airborne electromagnetic (AEM) geophysical surveys, optimization of mapping depth and line spacing needs to take in account the objectives of the groundwater models. The approach discussed here uses a first-order, second-moment (FOSM) uncertainty analyses which assumes an approximate linear relation between model parameters and observations. This assumption allows FOSM analyses to be applied to estimate the value of increased parameter knowledge to reduce forecast uncertainty. FOSM is used to facilitate optimization of yet-to-be-completed geophysical surveying to reduce model forecast uncertainty. The main objective of geophysical surveying is assumed to estimate values and spatial variation in hydrologic parameters (i.e. hydraulic conductivity) as well as map lower permeability layers that influence the spatial distribution of recharge flux. The proposed data worth analysis was applied to Mississippi Embayment Regional Aquifer Study (MERAS) which is being updated. The objective of MERAS is to assess the ground-water availability (status and trends) of the Mississippi embayment aquifer system. The study area covers portions of eight states including Alabama, Arkansas, Illinois, Kentucky, Louisiana, Mississippi, Missouri, and Tennessee. The active model grid covers approximately 70,000 square miles, and incorporates some 6,000 miles of major rivers and over 100,000 water wells. In the FOSM analysis, a dense network of pilot points was used to capture uncertainty in hydraulic conductivity and recharge. To simulate the effect of AEM flight lines, the prior uncertainty for hydraulic conductivity and recharge pilots along potential flight lines was

  18. Design

    Science.gov (United States)

    Buchanan, Richard; Cross, Nigel; Durling, David; Nelson, Harold; Owen, Charles; Valtonen, Anna; Boling, Elizabeth; Gibbons, Andrew; Visscher-Voerman, Irene

    2013-01-01

    Scholars representing the field of design were asked to identify what they considered to be the most exciting and imaginative work currently being done in their field, as well as how that work might change our understanding. The scholars included Richard Buchanan, Nigel Cross, David Durling, Harold Nelson, Charles Owen, and Anna Valtonen. Scholars…

  19. The use of systematic and heuristic methods in the basic design cycle : A comparative survey of students' method usage

    NARCIS (Netherlands)

    Person, F.E.O.K.; Daalhuizen, J.J.; Gattol, V.

    2013-01-01

    In the present paper, we study the reported use of systematic and heuristic methods for 304 students enrolled in a master-level course on design theory and methodology. What to teach design and engineering students about methods is an important topic for discussion. One reason for this is that the

  20. The challenge of comprehensively mapping children's health in a nation-wide health survey: Design of the German KiGGS-Study

    Directory of Open Access Journals (Sweden)

    Schlack Robert

    2008-06-01

    Full Text Available Abstract Background From May 2003 to May 2006, the Robert Koch Institute conducted the German Health Interview and Examination Survey for Children and Adolescents (KiGGS. Aim of this first nationwide interview and examination survey was to collect comprehensive data on the health status of children and adolescents aged 0 to 17 years. Methods/Design Participants were enrolled in two steps: first, 167 study locations (sample points were chosen; second, subjects were randomly selected from the official registers of local residents. The survey involved questionnaires filled in by parents and parallel questionnaires for children aged 11 years and older, physical examinations and tests, and a computer assisted personal interview performed by study physicians. A wide range of blood and urine testing was carried out at central laboratories. A total of 17 641 children and adolescents were surveyed – 8985 boys and 8656 girls. The proportion of sample neutral drop-outs was 5.3%. The response rate was 66.6%. Discussion The response rate showed little variation between age groups and sexes, but marked variation between resident aliens and Germans, between inhabitants of cities with a population of 100 000 or more and sample points with fewer inhabitants, as well as between the old West German states and the former East German states. By analysing the short non-responder questionnaires it was proven that the collected data give comprehensive and nationally representative evidence on the health status of children and adolescents aged 0 to 17 years.

  1. Participant dropout as a function of survey length in internet-mediated university studies: implications for study design and voluntary participation in psychological research.

    Science.gov (United States)

    Hoerger, Michael

    2010-12-01

    Internet-mediated research has offered substantial advantages over traditional laboratory-based research in terms of efficiently and affordably allowing for the recruitment of large samples of participants for psychology studies. Core technical, ethical, and methodological issues have been addressed in recent years, but the important issue of participant dropout has received surprisingly little attention. Specifically, web-based psychology studies often involve undergraduates completing lengthy and time-consuming batteries of online personality questionnaires, but no known published studies to date have closely examined the natural course of participant dropout during attempted completion of these studies. The present investigation examined participant dropout among 1,963 undergraduates completing one of six web-based survey studies relatively representative of those conducted in university settings. Results indicated that 10% of participants could be expected to drop out of these studies nearly instantaneously, with an additional 2% dropping out per 100 survey items included in the study. For individual project investigators, these findings hold ramifications for study design considerations, such as conducting a priori power analyses. The present results also have broader ethical implications for understanding and improving voluntary participation in research involving human subjects. Nonetheless, the generalizability of these conclusions may be limited to studies involving similar design or survey content.

  2. Men's Preferences for Physical Activity Interventions: An Exploratory Study Using a Factorial Survey Design Created With R Software.

    Science.gov (United States)

    Chatfield, Sheryl L; Gamble, Abigail; Hallam, Jeffrey S

    2018-03-01

    Effective exercise interventions are needed to improve quality of life and decrease the impact of chronic disease. Researchers suggest males have been underrepresented in exercise intervention studies, resulting in less understanding of their exercise practices. Findings from preference survey methods suggest reasonable association between preference and behavior. The purpose of the research described in this article was to use factorial survey, a preference method, to identify the characteristics of exercise interventions most likely to appeal to male participants, so preferences might be incorporated into future intervention research. The research was guided by the framework of Bandura's social cognitive theory, such that variations in individual, environmental, and behavioral factors were incorporated into vignettes. Participants included 53 adult male nonadministrative staff and contract employees at a public university in the Southeastern United States, who each scored 8 vignettes resulting in 423 observations. Multilevel models were used to assess the influence of the factors. Participants scored vignettes that included exercising with a single partner, playing basketball, and exercising in the evening higher than vignettes with other options. Qualitative analysis of an open response item identified additional alternatives in group size, participant desire for coaching support, and interest in programs that incorporate a range of activity alternatives. Findings from this research were consistent with elements of social cognitive theory as applied to health promotion. Factorial surveys potentially provide a resource effective means of identifying participants' preferences for use when planning interventions. The addition of a single qualitative item helped clarify and expand findings from statistical analysis.

  3. The use of systematic and heuristic methods in the basic design cycle: A comparative survey of students' method usage

    DEFF Research Database (Denmark)

    Person, O.; Daalhuizen, Jaap; Gattol, V.

    2013-01-01

    ) synthesis, (3) simulation, (4) evaluation, and (5) decision-making. The results of our study suggest that systematic and heuristic methods fulfil different roles for the students when designing. The students reported to use heuristic methods significantly more for synthesis, while they reported to use...... systematic methods significantly more for evaluation and decision-making. In understanding the potential origin of these use practices, we call for more in-depth studies on method usage in design, for instance related to the role of preference and knowledge on systematic and heuristic methods usage.......In the present paper, we study the reported use of systematic and heuristic methods for 304 students enrolled in a master-level course on design theory and methodology. What to teach design and engineering students about methods is an important topic for discussion. One reason...

  4. Evaluation of Nine Consensus Indices in Delphi Foresight Research and Their Dependency on Delphi Survey Characteristics: A Simulation Study and Debate on Delphi Design and Interpretation.

    Science.gov (United States)

    Birko, Stanislav; Dove, Edward S; Özdemir, Vural

    2015-01-01

    The extent of consensus (or the lack thereof) among experts in emerging fields of innovation can serve as antecedents of scientific, societal, investor and stakeholder synergy or conflict. Naturally, how we measure consensus is of great importance to science and technology strategic foresight. The Delphi methodology is a widely used anonymous survey technique to evaluate consensus among a panel of experts. Surprisingly, there is little guidance on how indices of consensus can be influenced by parameters of the Delphi survey itself. We simulated a classic three-round Delphi survey building on the concept of clustered consensus/dissensus. We evaluated three study characteristics that are pertinent for design of Delphi foresight research: (1) the number of survey questions, (2) the sample size, and (3) the extent to which experts conform to group opinion (the Group Conformity Index) in a Delphi study. Their impacts on the following nine Delphi consensus indices were then examined in 1000 simulations: Clustered Mode, Clustered Pairwise Agreement, Conger's Kappa, De Moivre index, Extremities Version of the Clustered Pairwise Agreement, Fleiss' Kappa, Mode, the Interquartile Range and Pairwise Agreement. The dependency of a consensus index on the Delphi survey characteristics was expressed from 0.000 (no dependency) to 1.000 (full dependency). The number of questions (range: 6 to 40) in a survey did not have a notable impact whereby the dependency values remained below 0.030. The variation in sample size (range: 6 to 50) displayed the top three impacts for the Interquartile Range, the Clustered Mode and the Mode (dependency = 0.396, 0.130, 0.116, respectively). The Group Conformity Index, a construct akin to measuring stubbornness/flexibility of experts' opinions, greatly impacted all nine Delphi consensus indices (dependency = 0.200 to 0.504), except the Extremity CPWA and the Interquartile Range that were impacted only beyond the first decimal point (dependency = 0

  5. Survey of basic medical researchers on the awareness of animal experimental designs and reporting standards in China.

    Directory of Open Access Journals (Sweden)

    Bin Ma

    Full Text Available To investigate the awareness and use of the Systematic Review Center for Laboratory Animal Experimentation's (SYRCLE risk-of-bias tool, the Animal Research: Reporting of In Vivo Experiments (ARRIVE reporting guidelines, and Gold Standard Publication Checklist (GSPC in China in basic medical researchers of animal experimental studies.A national questionnaire-based survey targeting basic medical researchers was carried in China to investigate the basic information and awareness of SYRCLE's risk of bias tool, ARRIVE guidelines, GSPC, and animal experimental bias risk control factors. The EpiData3.1 software was used for data entry, and Microsoft Excel 2013 was used for statistical analysis in this study. The number of cases (n and percentage (% of classified information were statistically described, and the comparison between groups (i.e., current students vs. research staff was performed using chi-square test.A total of 298 questionnaires were distributed, and 272 responses were received, which included 266 valid questionnaires (from 118 current students and 148 research staff. Among the 266 survey participants, only 15.8% was aware of the SYRCLE's risk of bias tool, with significant difference between the two groups (P = 0.003, and the awareness rates of ARRIVE guidelines and GSPC were only 9.4% and 9.0%, respectively; 58.6% survey participants believed that the reports of animal experimental studies in Chinese literature were inadequate, with significant difference between the two groups (P = 0.004. In addition, only approximately 1/3 of the survey participants had read systematic reviews and meta-analysis reports of animal experimental studies; only 16/266 (6.0% had carried out/participated in and 11/266 (4.1% had published systematic reviews/meta-analysis of animal experimental studies.The awareness and use rates of SYRCLE's risk-of-bias tool, the ARRIVE guidelines, and the GSPC were low among Chinese basic medical researchers. Therefore

  6. Web-based Surveys: Changing the Survey Process

    OpenAIRE

    Gunn, Holly

    2002-01-01

    Web-based surveys are having a profound influence on the survey process. Unlike other types of surveys, Web page design skills and computer programming expertise play a significant role in the design of Web-based surveys. Survey respondents face new and different challenges in completing a Web-based survey. This paper examines the different types of Web-based surveys, the advantages and challenges of using Web-based surveys, the design of Web-based surveys, and the issues of validity, error, ...

  7. Off-road sampling reveals a different grassland bird community than roadside sampling: implications for survey design and estimates to guide conservation

    Directory of Open Access Journals (Sweden)

    Troy I. Wellicome

    2014-06-01

    concern. Our results highlight the need to develop appropriate corrections for bias in estimates derived from roadside sampling, and the need to design surveys that sample bird communities across a more representative cross-section of the landscape, both near and far from roads.

  8. Design

    DEFF Research Database (Denmark)

    Jensen, Ole B.; Pettiway, Keon

    2017-01-01

    In this chapter, Ole B. Jensen takes a situational approach to mobilities to examine how ordinary life activities are structured by technology and design. Using “staging mobilities” as a theoretical approach, Jensen considers mobilities as overlapping, actions, interactions and decisions by desig...... by providing ideas about future research for investigating mobilities in situ as a kind of “staging,” which he notes is influenced by the “material turn” in social sciences....... with a brief description of how movement is studied within social sciences after the “mobilities turn” versus the idea of physical movement in transport geography and engineering. He then explains how “mobilities design” was derived from connections between traffic and architecture. Jensen concludes...

  9. Web Survey Design in ASP.Net 2.0: A Simple Task with One Line of Code

    Science.gov (United States)

    Liu, Chang

    2007-01-01

    Over the past few years, more and more companies have been investing in electronic commerce (EC) by designing and implementing Web-based applications. In the world of practice, the importance of using Web technology to reach individual customers has been presented by many researchers. This paper presents an easy way of conducting marketing…

  10. Fracture mapping in clays, using gas geochemistry: background, design of a mobile laboratory, and surveys in England and Italy

    International Nuclear Information System (INIS)

    Gregory, R.G.; Duddridge, G.A.

    1991-01-01

    Integrated soil gas analyses for helium, radon, carbon dioxide and oxygen allow the accurate interpretation of soil gas signatures as indicators of underlying structure, due to large variations over faults and fractures. Structures such as these provide channelways for fluid movement in the upper crust. A mobile gas geochemistry laboratory for the analysis of soil gases was constructed and surveys were carried out at sites in England and Italy. At the Down Ampney site, Gloucestershire, gas was injected into a fault plane, and recorded some hours later at the surface. Refinement of this experiment would allow a full characterization of permeable pathways at a site to be made. The soil gas technique has been shown to be viable as an independent site investigation method for the study of fracturing and groundwater movement around potential waste repository sites

  11. Fracture mapping in clays: using gas geochemistry. Background, design of a mobile laboratory and surveys in England and Italy

    International Nuclear Information System (INIS)

    Duddridge, G.A.

    1991-06-01

    Integrated soil gas analyses for helium, radon, carbon dioxide and oxygen allow the accurate interpretation of soil gas signatures as indicators of underlying structure, due to large variations over faults and fractures. Structures such as these provide channelways for fluid movement in the upper crust. A mobile gas geochemistry laboratory for the analysis of soil gases was constructed and surveys were carried out at sites in England and Italy. At the Down Ampney site, Gloucestershire, gas was injected into a fault plane, and recorded some hours later at the surface. Refinement of this experiment would allow a full characterisation of permeable pathways at a site to be made. The soil gas technique has been shown to be viable as an independent site investigation method for the study of fracturing and groundwater movement around potential waste repository sites. (author)

  12. A survey of possible microbiological effects within shallow land disposal sites designed to accept intermediate-level radioactive wastes

    International Nuclear Information System (INIS)

    Rushbrook, P.E.

    1985-01-01

    A literature survey was conducted to assess the current knowledge on microbial activity that may occur within a shallow intermediate-level waste disposal trench. Relatively little published information exists that is directly based on intermediate radioactive wasteforms, but relevant work was identified from other scientific fields. The likely environmental conditions within a disposal trench and their influence on microbial activity are considered. Also discussed are specific microbiological effects on waste packagings, backfill materials and concrete structures. Overall, it is unlikely that there will be extensive activity within the trenches and little evidence exists to suggest microbiologically-enhanced radionuclide migration,. The quantitative effect of microbial action is not possible to ascertain from the literature, but the general impression is that it will be low. Physical or chemical degradation processes are likely to predominate over those of a microbiological nature. Areas where further research would be valuable are also recommended. (author)

  13. Design and Reproducibility of a Mini-Survey to Evaluate the Quality of Food Intake (Mini-ECCA in a Mexican Population

    Directory of Open Access Journals (Sweden)

    María Fernanda Bernal-Orozco

    2018-04-01

    Full Text Available Evaluating food intake quality may contribute to the development of nutrition programs. In Mexico, there are no screening tools that can be administered quickly for the evaluation of this variable. The aim was to determine the reproducibility of a mini-survey designed to evaluate the quality of food intake (Mini-ECCA in a Mexican population. Mini-ECCA consists of 12 questions that are based on Mexican and international recommendations for food and non-alcoholic beverage intake, with the support of photographs for food quantity estimation. Each question scores as 0 (unhealthy or 1 (healthy, and the final score undergoes a classification procedure. Through the framework of a nutritional study, 152 employees of the municipal water company in Guadalajara, Mexico (April–August 2016, were invited to participate. The survey was administered in two rounds (test and retest with a 15-day interval between them. We calculated the Spearman correlation coefficient, the intra-class correlation coefficient (ICC, and weighted kappa for score classification agreement (SPSS versus 14 p < 0.05 was considered statistically significant. The survey obtained a “good” reproducibility (ρ = 0.713, p < 0.001, and an excellent concordance (ICC = 0.841 Confidence Interval 95% 0.779, 0.885. It can thus be said that the Mini-ECCA displayed acceptable reproducibility and is suitable for the purpose of dietary assessment and guidance.

  14. State-of-the-art and dissemination of computational tools for drug-design purposes: a survey among Italian academics and industrial institutions.

    Science.gov (United States)

    Artese, Anna; Alcaro, Stefano; Moraca, Federica; Reina, Rocco; Ventura, Marzia; Costantino, Gabriele; Beccari, Andrea R; Ortuso, Francesco

    2013-05-01

    During the first edition of the Computationally Driven Drug Discovery meeting, held in November 2011 at Dompé Pharma (L'Aquila, Italy), a questionnaire regarding the diffusion and the use of computational tools for drug-design purposes in both academia and industry was distributed among all participants. This is a follow-up of a previously reported investigation carried out among a few companies in 2007. The new questionnaire implemented five sections dedicated to: research group identification and classification; 18 different computational techniques; software information; hardware data; and economical business considerations. In this article, together with a detailed history of the different computational methods, a statistical analysis of the survey results that enabled the identification of the prevalent computational techniques adopted in drug-design projects is reported and a profile of the computational medicinal chemist currently working in academia and pharmaceutical companies in Italy is highlighted.

  15. Infographic Modeling Based on 3d Laser Surveying for Informed Universal Design in Archaeological Areas: the Case of Oppidum of the Ancient City of Tusculum

    Science.gov (United States)

    Cemoli, L.; D'Auria, S.; De Silla, F.; Pucci, S.; Strollo, R. M.

    2017-08-01

    The valorisation of archaeological sites represents a fundamental action for the social and economic development of a country. An archaeological park is often a territory characterized by significant testimonies of antiquity of great landscape value. For this reason, it should be configured as an authentic outdoor museum, enriched by natural, environmental, architectural and urban components. In order to fulfill these requirements, it is fundamental the elaboration of a coherent scientific project of preservation, fruition and valorisation of the area, which merge the different components necessary for the establishment of an archaeological museum-park. One of the most critical aspects related to the fruition of archaeological sites is the accessibility to areas and routes, not always - if ever - designed for people with reduced mobility, also temporary (for example elderly, obese, visually impaired, etc.). In general, an established principle used in the new design is to pay attention to the so-called wide users, in accordance with the international guidelines summarized in the concept of Universal Design. In particular, this paper presents the use of three-dimensional models obtained from laser scanning surveys for the design of walking trails for people with reduced mobility in the Tusculum Archaeological-Cultural Park. The work was based on the fundamental implementation of the three-dimensional survey with terrestrial laser scanning for the construction and the control of the complex morphology of the site, and on the subsequent integration of models of the intervention in the three-dimensional reality "as-built" of the site. The obtained infographic model allowed to study and simulate the impact of the routes for people with reduced mobility, and to verify its efficiency in the historical and landscape context. Moreover, it was possible to verify the construction of other facilities in the real conditions of the site.

  16. INFOGRAPHIC MODELING BASED ON 3D LASER SURVEYING FOR INFORMED UNIVERSAL DESIGN IN ARCHAEOLOGICAL AREAS: THE CASE OF OPPIDUM OF THE ANCIENT CITY OF TUSCULUM

    Directory of Open Access Journals (Sweden)

    L. Cemoli

    2017-08-01

    Full Text Available The valorisation of archaeological sites represents a fundamental action for the social and economic development of a country. An archaeological park is often a territory characterized by significant testimonies of antiquity of great landscape value. For this reason, it should be configured as an authentic outdoor museum, enriched by natural, environmental, architectural and urban components. In order to fulfill these requirements, it is fundamental the elaboration of a coherent scientific project of preservation, fruition and valorisation of the area, which merge the different components necessary for the establishment of an archaeological museum-park. One of the most critical aspects related to the fruition of archaeological sites is the accessibility to areas and routes, not always – if ever – designed for people with reduced mobility, also temporary (for example elderly, obese, visually impaired, etc.. In general, an established principle used in the new design is to pay attention to the so-called wide users, in accordance with the international guidelines summarized in the concept of Universal Design. In particular, this paper presents the use of three-dimensional models obtained from laser scanning surveys for the design of walking trails for people with reduced mobility in the Tusculum Archaeological-Cultural Park. The work was based on the fundamental implementation of the three-dimensional survey with terrestrial laser scanning for the construction and the control of the complex morphology of the site, and on the subsequent integration of models of the intervention in the three-dimensional reality "as-built" of the site. The obtained infographic model allowed to study and simulate the impact of the routes for people with reduced mobility, and to verify its efficiency in the historical and landscape context. Moreover, it was possible to verify the construction of other facilities in the real conditions of the site.

  17. A survey of attitudes and factors associated with successful cardiopulmonary resuscitation (CPR knowledge transfer in an older population most likely to witness cardiac arrest: design and methodology

    Directory of Open Access Journals (Sweden)

    Brehaut Jamie C

    2008-11-01

    Full Text Available Abstract Background Overall survival rates for out-of-hospital cardiac arrest rarely exceed 5%. While bystander cardiopulmonary resuscitation (CPR can increase survival for cardiac arrest victims by up to four times, bystander CPR rates remain low in Canada (15%. Most cardiac arrest victims are men in their sixties, they usually collapse in their own home (85% and the event is witnessed 50% of the time. These statistics would appear to support a strategy of targeted CPR training for an older population that is most likely to witness a cardiac arrest event. However, interest in CPR training appears to decrease with advancing age. Behaviour surrounding CPR training and performance has never been studied using well validated behavioural theories. Methods/Design The overall goal of this study is to conduct a survey to better understand the behavioural factors influencing CPR training and performance in men and women 55 years of age and older. The study will proceed in three phases. In phase one, semi-structured qualitative interviews will be conducted and recorded to identify common categories and themes regarding seeking CPR training and providing CPR to a cardiac arrest victim. The themes identified in the first phase will be used in phase two to develop, pilot-test, and refine a survey instrument based upon the Theory of Planned Behaviour. In the third phase of the project, the final survey will be administered to a sample of the study population over the telephone. Analyses will include measures of sampling bias, reliability of the measures, construct validity, as well as multiple regression analyses to identify constructs and beliefs most salient to seniors' decisions about whether to attend CPR classes or perform CPR on a cardiac arrest victim. Discussion The results of this survey will provide valuable insight into factors influencing the interest in CPR training and performance among a targeted group of individuals most susceptible to

  18. A General-Purpose Spatial Survey Design for Collaborative Science and Monitoring of Global Environmental Change: The Global Grid

    Directory of Open Access Journals (Sweden)

    David M. Theobald

    2016-09-01

    Full Text Available Recent guidance on environmental modeling and global land-cover validation stresses the need for a probability-based design. Additionally, spatial balance has also been recommended as it ensures more efficient sampling, which is particularly relevant for understanding land use change. In this paper I describe a global sample design and database called the Global Grid (GG that has both of these statistical characteristics, as well as being flexible, multi-scale, and globally comprehensive. The GG is intended to facilitate collaborative science and monitoring of land changes among local, regional, and national groups of scientists and citizens, and it is provided in a variety of open source formats to promote collaborative and citizen science. Since the GG sample grid is provided at multiple scales and is globally comprehensive, it provides a universal, readily-available sample. It also supports uneven probability sample designs through filtering sample locations by user-defined strata. The GG is not appropriate for use at locations above ±85° because the shape and topological distortion of quadrants becomes extreme near the poles. Additionally, the file sizes of the GG datasets are very large at fine scale (resolution ~600 m × 600 m and require a 64-bit integer representation.

  19. No hay mal que por bien no venga: el optimismo según Rousseau

    OpenAIRE

    Baranzelli, Dante A.

    2004-01-01

    El deísmo rousseauniano desestima la existencia del caos o del Mal general. Por el contrario, ve en el sistema del mundo un orden perfecto que obedece a la divina Providencia, identificada con la legalidad universal de la naturaleza. Mas con ello su intención no es despreciar el sufrimiento de los individuos. De hecho Rousseau reconoce y admite la presencia, e incluso la abundancia, de diversos males que afectan al hombre. ¿Acaso él mismo no es un claro ejemplo de ello?

  20. Engineering survey planning for the alignment of a particle accelerator: part II. Design of a reference network and measurement strategy

    Science.gov (United States)

    Junqueira Leão, Rodrigo; Raffaelo Baldo, Crhistian; Collucci da Costa Reis, Maria Luisa; Alves Trabanco, Jorge Luiz

    2018-03-01

    The building blocks of particle accelerators are magnets responsible for keeping beams of charged particles at a desired trajectory. Magnets are commonly grouped in support structures named girders, which are mounted on vertical and horizontal stages. The performance of this type of machine is highly dependent on the relative alignment between its main components. The length of particle accelerators ranges from small machines to large-scale national or international facilities, with typical lengths of hundreds of meters to a few kilometers. This relatively large volume together with micrometric positioning tolerances make the alignment activity a classical large-scale dimensional metrology problem. The alignment concept relies on networks of fixed monuments installed on the building structure to which all accelerator components are referred. In this work, the Sirius accelerator is taken as a case study, and an alignment network is optimized via computational methods in terms of geometry, densification, and surveying procedure. Laser trackers are employed to guide the installation and measure the girders’ positions, using the optimized network as a reference and applying the metric developed in part I of this paper. Simulations demonstrate the feasibility of aligning the 220 girders of the Sirius synchrotron to better than 0.080 mm, at a coverage probability of 95%.

  1. Designing and Implementing a Retrospective Earthquake Detection Framework at the U.S. Geological Survey National Earthquake Information Center

    Science.gov (United States)

    Patton, J.; Yeck, W.; Benz, H.

    2017-12-01

    The U.S. Geological Survey National Earthquake Information Center (USGS NEIC) is implementing and integrating new signal detection methods such as subspace correlation, continuous beamforming, multi-band picking and automatic phase identification into near-real-time monitoring operations. Leveraging the additional information from these techniques help the NEIC utilize a large and varied network on local to global scales. The NEIC is developing an ordered, rapid, robust, and decentralized framework for distributing seismic detection data as well as a set of formalized formatting standards. These frameworks and standards enable the NEIC to implement a seismic event detection framework that supports basic tasks, including automatic arrival time picking, social media based event detections, and automatic association of different seismic detection data into seismic earthquake events. In addition, this framework enables retrospective detection processing such as automated S-wave arrival time picking given a detected event, discrimination and classification of detected events by type, back-azimuth and slowness calculations, and ensuring aftershock and induced sequence detection completeness. These processes and infrastructure improve the NEIC's capabilities, accuracy, and speed of response. In addition, this same infrastructure provides an improved and convenient structure to support access to automatic detection data for both research and algorithmic development.

  2. Inclusion of mobile telephone numbers into an ongoing population health survey in New South Wales, Australia, using an overlapping dual-frame design: impact on the time series.

    Science.gov (United States)

    Barr, Margo L; Ferguson, Raymond A; Steel, David G

    2014-08-12

    Since 1997, the NSW Population Health Survey (NSWPHS) had selected the sample using random digit dialing of landline telephone numbers. When the survey began coverage of the population by landline phone frames was high (96%). As landline coverage in Australia has declined and continues to do so, in 2012, a sample of mobile telephone numbers was added to the survey using an overlapping dual-frame design. Details of the methodology are published elsewhere. This paper discusses the impacts of the sampling frame change on the time series, and provides possible approaches to handling these impacts. Prevalence estimates were calculated for type of phone-use, and a range of health indicators. Prevalence ratios (PR) for each of the health indicators were also calculated using Poisson regression analysis with robust variance estimation by type of phone-use. Health estimates for 2012 were compared to 2011. The full time series was examined for selected health indicators. It was estimated from the 2012 NSWPHS that 20.0% of the NSW population were mobile-only phone users. Looking at the full time series for overweight or obese and current smoking if the NSWPHS had continued to be undertaken only using a landline frame, overweight or obese would have been shown to continue to increase and current smoking would have been shown to continue to decrease. However, with the introduction of the overlapping dual-frame design in 2012, overweight or obese increased until 2011 and then decreased in 2012, and current smoking decreased until 2011, and then increased in 2012. Our examination of these time series showed that the changes were a consequence of the sampling frame change and were not real changes. Both the backcasting method and the minimal coverage method could adequately adjust for the design change and allow for the continuation of the time series. The inclusion of the mobile telephone numbers, through an overlapping dual-frame design, did impact on the time series for some of

  3. Characteristics of the ancient tombs and application to cover design of a near-surface disposal facility : literature survey

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Beak; Lee, Ji Hoon; Park, Joo Wan; Kim, Chang Lak [Nuclear Environment Technology Institute, Taejeon (Korea, Republic of); Yang, Si Eun; Lee, Sun Bok [Seoul National University, Seoul (Korea, Republic of)

    2005-06-15

    To support the design concept and performance evaluation of the cover system for low- and intermediate-level radioactive waste(LILW) disposal facility, the pioneering study is conducted with the tomb of historical age. Research status of the art are followed and the characteristics of tomb cover are summarized based on the preservation of historical remains. Visiting the excavation site of historical tomb and communication with Korean archaeological society is required for the further understanding and for the extension of radioactive waste disposal research.

  4. Surveying Future Surveys

    Science.gov (United States)

    Carlstrom, John E.

    2016-06-01

    The now standard model of cosmology has been tested and refined by the analysis of increasingly sensitive, large astronomical surveys, especially with statistically significant millimeter-wave surveys of the cosmic microwave background and optical surveys of the distribution of galaxies. This talk will offer a glimpse of the future, which promises an acceleration of this trend with cosmological information coming from new surveys across the electromagnetic spectrum as well as particles and even gravitational waves.

  5. What Are Probability Surveys used by the National Aquatic Resource Surveys?

    Science.gov (United States)

    The National Aquatic Resource Surveys (NARS) use probability-survey designs to assess the condition of the nation’s waters. In probability surveys (also known as sample-surveys or statistical surveys), sampling sites are selected randomly.

  6. Engineering surveying

    CERN Document Server

    Schofield, W

    2007-01-01

    Engineering surveying involves determining the position of natural and man-made features on or beneath the Earth's surface and utilizing these features in the planning, design and construction of works. It is a critical part of any engineering project. Without an accurate understanding of the size, shape and nature of the site the project risks expensive and time-consuming errors or even catastrophic failure.Engineering Surveying 6th edition covers all the basic principles and practice of this complex subject and the authors bring expertise and clarity. Previous editions of this classic text have given readers a clear understanding of fundamentals such as vertical control, distance, angles and position right through to the most modern technologies, and this fully updated edition continues that tradition.This sixth edition includes:* An introduction to geodesy to facilitate greater understanding of satellite systems* A fully updated chapter on GPS, GLONASS and GALILEO for satellite positioning in surveying* Al...

  7. Measuring health literacy in populations: illuminating the design and development process of the European Health Literacy Survey Questionnaire (HLS-EU-Q).

    Science.gov (United States)

    Sørensen, Kristine; Van den Broucke, Stephan; Pelikan, Jürgen M; Fullam, James; Doyle, Gerardine; Slonska, Zofia; Kondilis, Barbara; Stoffels, Vivian; Osborne, Richard H; Brand, Helmut

    2013-10-10

    Several measurement tools have been developed to measure health literacy. The tools vary in their approach and design, but few have focused on comprehensive health literacy in populations. This paper describes the design and development of the European Health Literacy Survey Questionnaire (HLS-EU-Q), an innovative, comprehensive tool to measure health literacy in populations. Based on a conceptual model and definition, the process involved item development, pre-testing, field-testing, external consultation, plain language check, and translation from English to Bulgarian, Dutch, German, Greek, Polish, and Spanish. The development process resulted in the HLS-EU-Q, which entailed two sections, a core health literacy section and a section on determinants and outcomes associated to health literacy. The health literacy section included 47 items addressing self-reported difficulties in accessing, understanding, appraising and applying information in tasks concerning decisions making in healthcare, disease prevention, and health promotion. The second section included items related to, health behaviour, health status, health service use, community participation, socio-demographic and socio-economic factors. By illuminating the detailed steps in the design and development process of the HLS-EU-Q, it is the aim to provide a deeper understanding of its purpose, its capability and its limitations for others using the tool. By stimulating a wide application it is the vision that HLS-EU-Q will be validated in more countries to enhance the understanding of health literacy in different populations.

  8. Designing Microblog Direct Messages to Engage Social Media Users With Suicide Ideation: Interview and Survey Study on Weibo.

    Science.gov (United States)

    Tan, Ziying; Liu, Xingyun; Liu, Xiaoqian; Cheng, Qijin; Zhu, Tingshao

    2017-12-12

    While Web-based interventions can be efficacious, engaging a target population's attention remains challenging. We argue that strategies to draw such a population's attention should be tailored to meet its needs. Increasing user engagement in online suicide intervention development requires feedback from this group to prevent people who have suicide ideation from seeking treatment. The goal of this study was to solicit feedback on the acceptability of the content of messaging from social media users with suicide ideation. To overcome the common concern of lack of engagement in online interventions and to ensure effective learning from the message, this research employs a customized design of both content and length of the message. In study 1, 17 participants suffering from suicide ideation were recruited. The first (n=8) group conversed with a professional suicide intervention doctor about its attitudes and suggestions for a direct message intervention. To ensure the reliability and consistency of the result, an identical interview was conducted for the second group (n=9). Based on the collected data, questionnaires about this intervention were formed. Study 2 recruited 4222 microblog users with suicide ideation via the Internet. The results of the group interviews in study 1 yielded little difference regarding the interview results; this difference may relate to the 2 groups' varied perceptions of direct message design. However, most participants reported that they would be most drawn to an intervention where they knew that the account was reliable. Out of 4222 microblog users, we received responses from 725 with completed questionnaires; 78.62% (570/725) participants were not opposed to online suicide intervention and they valued the link for extra suicide intervention information as long as the account appeared to be trustworthy. Their attitudes toward the intervention and the account were similar to those from study 1, and 3 important elements were found

  9. A survey of physicians' experience and awareness of institutional provisions designed to foster patient engagement in KSA

    Directory of Open Access Journals (Sweden)

    Bayan S. Shahahmad, MBA

    2018-06-01

    لممارسة وأولئك الذين يشغلون مناصب إدارية عليا هم أكثر من يقدم الدعم، ويقدر أهمية تعزيز مشاركة المريض في ممارستهم. Abstract: Objectives: To survey physicians' perceptions of their experience and awareness of institutional provisions that can potentially foster patient engagement (PE in KSA. Methods: In April 2017, an online survey was distributed to clinicians in KSA using Google Forms. The instrument contained questions about the physicians' awareness and experience of their institutions' provision of resources and support. Results: Three hundred and twenty-five clinicians responded to the survey The results showed that 18.5% claimed that their institutions allowed online scheduling of appointments; 8.9% reported the institutions permitted contact between patients and physicians through email; 24.0% reported they provided patients with online access to health records and test results; 55.7% claimed they provided educational multimedia programming; and 74.8% confirmed they encouraged joint decision-making between physicians and patients. Only 34.5% of respondents claimed their institutions provided home visits for high-risk patients. Six of 10 respondents thought that such provisions would have positive outcomes for them and for their patients. Conclusions: Clinicians are aware of and value provisions that foster PE. However, several institutions in KSA do not support or have provisions in place to foster PE. Male clinicians with longer durations of practice and those with higher administrative positions are more likely to value the importance of PE and support and use it in their practice. الكلمات المفتاحية: إشراك, المؤسسية, المريض, الأحكام, الدعم, Keywords: Foster, Institutional provision, Patient engagement

  10. Present condition of survey research on actualization strategy of fast breeder reactor (FBR) cycling. Design research on fuel production system

    International Nuclear Information System (INIS)

    Tanaka, Kenya

    2001-01-01

    The fuel production system design investigation was performed for construction of fuel production process concept and plant image searching for the targets such as economics, environmental loading reduction, and so on required for practical use of FBR fuel recycling at a premise of safety security. By expectation of economics as a fuel cycling system, enhancement of nuclear proliferation resistance, and so on, it becomes more important to investigate on a fuel cycling system suitable for raw materials with low decontamination and high radiation intensity. In addition, it is also necessary to carry out investigation on fuel production system concept accompanies with MA recycling system for reduction of environmental loading. Therefore, investigation objects on the system were laid their fundamental processes on denitrification conversion/pelletizing process and gelation/vibration filling process for raw material solution from advancing wet reprocessing and on vibration filling process for oxide granules obtained from dry reprocessing system and casting method for metal fuels. As a result, for the pollution removal fuel production system suitable for either of wet/dry reprocessing, a mass-production scale production plant image was elucidated at a premise of production yield, realizability of remote automation system, and so on. On candidate concepts of every fuel production system, no fatal defect was found on results of outline evaluation on features of system such as production facility scale and so on before present stage. (G.K.)

  11. Case study: survey of patient satisfaction with prosthesis quality and design among below-knee prosthetic leg socket users.

    Science.gov (United States)

    Mohd Hawari, Nurhanisah; Jawaid, Mohammad; Md Tahir, Paridah; Azmeer, Raja Ahmad

    2017-11-01

    The aim of this case study was to explore patient satisfaction with the quality of prosthetic leg sockets intended for persons with lower limb amputations. A qualitative study based on in-depth interviews, preceded by a questionnaire session, was carried out with patients from the Rehabilitation Center and Hospital in Malaysia. Twelve out-patient and in-patient amputees with lower limb amputations, specifically below-knee amputations, were chosen randomly. The analysis of patients' narratives aimed to identify the functional and esthetic characteristics of currently used prosthetic leg sockets and any problems related to them. The obtained results indicated that out of the 12 participants, 41.7% and 25% were satisfied and somewhat satisfied with their current prosthetic sockets. Durability and comfort were rated by the participants as the most important characteristics of prosthetic sockets, with 83.3%. As regards the esthetic appearance of the socket, 66.7% of the respondents considered that the most important feature was the material from which the socket was fabricated. Thus, we conclude that current satisfaction levels with the quality of prosthetic sockets among amputees in Malaysia are suitable, prosthesis being preferred by many amputees. The results can be used to direct future research on cosmesis and functionality of prosthetic socket design. Implications for Rehabilitation Case study will help participants to get cost effective prosthetic leg socket. Develop prosthetic leg socket comfortable as comparative to existing one. Help Malaysian government to make policy to develop local prosthetic leg socket at affordable price.

  12. Cross-sector surveys assessing perceptions of key stakeholders towards barriers, concerns and facilitators to the appropriate use of adaptive designs in confirmatory trials.

    Science.gov (United States)

    Dimairo, Munyaradzi; Julious, Steven A; Todd, Susan; Nicholl, Jonathan P; Boote, Jonathan

    2015-12-23

    Appropriately conducted adaptive designs (ADs) offer many potential advantages over conventional trials. They make better use of accruing data, potentially saving time, trial participants, and limited resources compared to conventional, fixed sample size designs. However, one can argue that ADs are not implemented as often as they should be, particularly in publicly funded confirmatory trials. This study explored barriers, concerns, and potential facilitators to the appropriate use of ADs in confirmatory trials among key stakeholders. We conducted three cross-sectional, online parallel surveys between November 2014 and January 2015. The surveys were based upon findings drawn from in-depth interviews of key research stakeholders, predominantly in the UK, and targeted Clinical Trials Units (CTUs), public funders, and private sector organisations. Response rates were as follows: 30(55 %) UK CTUs, 17(68 %) private sector, and 86(41 %) public funders. A Rating Scale Model was used to rank barriers and concerns in order of perceived importance for prioritisation. Top-ranked barriers included the lack of bridge funding accessible to UK CTUs to support the design of ADs, limited practical implementation knowledge, preference for traditional mainstream designs, difficulties in marketing ADs to key stakeholders, time constraints to support ADs relative to competing priorities, lack of applied training, and insufficient access to case studies of undertaken ADs to facilitate practical learning and successful implementation. Associated practical complexities and inadequate data management infrastructure to support ADs were reported as more pronounced in the private sector. For funders of public research, the inadequate description of the rationale, scope, and decision-making criteria to guide the planned AD in grant proposals by researchers were all viewed as major obstacles. There are still persistent and important perceptions of individual and organisational obstacles

  13. Assessment of a multimedia-based prospective method to support public deliberations on health technology design: participant survey findings and qualitative insights.

    Science.gov (United States)

    Lehoux, P; Jimenez-Pernett, J; Miller, F A; Williams-Jones, B

    2016-10-26

    Using a combination of videos and online short stories, we conducted four face-to-face deliberative workshops in Montreal (Quebec, Canada) with members of the public who later joined additional participants in an online forum to discuss the social and ethical implications of prospective technologies. This paper presents the participants' appraisal of our intervention and provides novel qualitative insights into the use of videos and online tools in public deliberations. We applied a mixed-method study design. A self-administered survey contained open- and close-ended items using a 5-level Likert-like scale. Absolute frequencies and proportions for the close-ended items were compiled. Qualitative data included field notes, the transcripts of the workshops and the participants' contributions to the online forum. The qualitative data were used to flesh out the survey data describing the participants' appraisal of: 1) the multimedia components of our intervention; 2) its deliberative face-to-face and online processes; and 3) its perceived effects. Thirty-eight participants contributed to the workshops and 57 to the online forum. A total of 46 participants filled-in the survey, for a response rate of 73 % (46/63). The videos helped 96 % of the participants to understand the fictional technologies and the online scenarios helped 98 % to reflect about the issues raised. Up to 81 % considered the arguments of the other participants to be well thought-out. Nearly all participants felt comfortable sharing their ideas in both the face-to-face (89 %) and online environments (93 %), but 88 % preferred the face-to-face workshop. As a result of the intervention, 85 % reflected more about the pros and cons of technology and 94 % learned more about the way technologies may transform society. This study confirms the methodological feasibility of a deliberative intervention whose originality lies in its use of videos and online scenarios. To increase deliberative depth and foster a

  14. Surveying the citizen science landscape: an exploration of the design, delivery and impact of citizen science through the lens of the Open Air Laboratories (OPAL) programme.

    Science.gov (United States)

    Davies, Linda; Fradera, Roger; Riesch, Hauke; Lakeman-Fraser, Poppy

    2016-07-22

    This paper provides a short introduction to the topic of citizen science (CS) identifying the shift from the knowledge deficit model to more inclusive, participatory science. It acknowledges the benefits of new technology and the opportunities it brings for mass participation and data manipulation. It focuses on the increase in interest in CS in recent years and draws on experience gained from the Open Air Laboratories (OPAL) programme launched in England in 2007. The drivers and objectives for OPAL are presented together with background information on the partnership, methods and scales. The approaches used by researchers ranged from direct public participation in mass data collection through field surveys to research with minimal public engagement. The supporting services focused on education, particularly to support participants new to science, a media strategy and data services. Examples from OPAL are used to illustrate the different approaches to the design and delivery of CS that have emerged over recent years and the breadth of opportunities for public participation the current landscape provides. Qualitative and quantitative data from OPAL are used as evidence of the impact of CS. While OPAL was conceived ahead of the more recent formalisation of approaches to the design, delivery and analysis of CS projects and their impact, it nevertheless provides a range of examples against which to assess the various benefits and challenges emerging in this fast developing field.

  15. Daylighting as the Driving Force of the Design Process: from the Results of a Survey to the Implementation into an Advanced Daylighting Project

    Directory of Open Access Journals (Sweden)

    Valerio R.M. Lo Verso

    2014-12-01

    Full Text Available This paper presents a study for the transformation of an industrial area in Turin, Italy. The area hosts two buildings (one of which appointed as listed to be transformed into dwellings. A synergic approach was adopted which combined expertise from architecture, social-economics, psychology and building physics sciences. Building physics sciences lead the research team. A user-centered design was pursued, using a bottom-up approach. A specifically developed questionnaire was submitted on-line to potential users. The survey showed that ‘amount of daylight’, ‘size of rooms’, ‘tranquility of the area’ and ‘presence of a private garden’ were perceived by users to be the most positive aspects of both their present and future, ideal home. These results were then implemented into the project. The exploitation of daylight became the driving force of the transformation project. Especially for the listed building, skylights and light wells were designed to bring daylight into the cores of the buildings, which host common spaces such as libraries or study rooms. The amount of daylight was assessed through the legislative index of the average daylight factor and through a climate-based modeling approach, calculating dynamic metrics such as the spatial daylight autonomy and the Useful Daylight Illuminance. The paper critically compares and discusses these two approaches. Finally, the energy demand for lighting was also calculated to analyze how the increased exploitation of daylight may imply a reduced need for electricity for lighting.

  16. Developing a weighting strategy to include mobile phone numbers into an ongoing population health survey using an overlapping dual-frame design with limited benchmark information.

    Science.gov (United States)

    Barr, Margo L; Ferguson, Raymond A; Hughes, Phil J; Steel, David G

    2014-09-04

    In 2012 mobile phone numbers were included into the ongoing New South Wales Population Health Survey (NSWPHS) using an overlapping dual-frame design. Previously in the NSWPHS the sample was selected using random digit dialing (RDD) of landline phone numbers. The survey was undertaken using computer assisted telephone interviewing (CATI). The weighting strategy needed to be significantly expanded to manage the differing probabilities of selection by frame, including that of children of mobile-only phone users, and to adjust for the increased chance of selection of dual-phone users. This paper describes the development of the final weighting strategy to properly combine the data from two overlapping sample frames accounting for the fact that population benchmarks for the different sampling frames were not available at the state or regional level. Estimates of the number of phone numbers for the landline and mobile phone frames used to calculate the differing probabilities of selection by frame, for New South Wales (NSW) and by stratum, were obtained by apportioning Australian estimates as none were available for NSW. The weighting strategy was then developed by calculating person selection probabilities, selection weights, applying a constant composite factor to the dual-phone users sample weights, and benchmarking to the latest NSW population by age group, sex and stratum. Data from the NSWPHS for the first quarter of 2012 was used to test the weighting strategy. This consisted of data on 3395 respondents with 2171 (64%) from the landline frame and 1224 (36%) from the mobile frame. However, in order to calculate the weights, data needed to be available for all core weighting variables and so 3378 respondents, 2933 adults and 445 children, had sufficient data to be included. Average person weights were 3.3 times higher for the mobile-only respondents, 1.3 times higher for the landline-only respondents and 1.7 times higher for dual-phone users in the mobile frame

  17. Using New Technologies for Time Diary Data Collection: Instrument Design and Data Quality Findings from a Mixed-Mode Pilot Survey.

    Science.gov (United States)

    Chatzitheochari, Stella; Fisher, Kimberly; Gilbert, Emily; Calderwood, Lisa; Huskinson, Tom; Cleary, Andrew; Gershuny, Jonathan

    2018-01-01

    Recent years have witnessed a steady growth of time-use research, driven by the increased research and policy interest in population activity patterns and their associations with long-term outcomes. There is recent interest in moving beyond traditional paper-administered time diaries to use new technologies for data collection in order to reduce respondent burden and administration costs, and to improve data quality. This paper presents two novel diary instruments that were employed by a large-scale multi-disciplinary cohort study in order to obtain information on the time allocation of adolescents in the United Kingdom. A web-administered diary and a smartphone app were created, and a mixed-mode data collection approach was followed: cohort members were asked to choose between these two modes, and those who were unable or refused to use the web/app modes were offered a paper diary. Using data from a pilot survey of 86 participants, we examine diary data quality indicators across the three modes. Results suggest that the web and app modes yield an overall better time diary data quality than the paper mode, with a higher proportion of diaries with complete activity and contextual information. Results also show that the web and app modes yield a comparable number of activity episodes to the paper mode. These results suggest that the use of new technologies can improve diary data quality. Future research using larger samples should systematically investigate selection and measurement effects in mixed-mode time-use survey designs.

  18. Designing a lifestyle intervention to reduce risk of type 2 diabetes in postpartum mothers following gestational diabetes: An online survey with mothers and health professionals.

    Science.gov (United States)

    Moore, Amanda P; D'Amico, Maria I; Cooper, Natalie A M; Thangaratinam, Shakila

    2018-01-01

    The aim of this study was to identify what components of a postpartum lifestyle intervention would engage postpartum mothers who had a diagnosis of gestational diabetes. Two online surveys were conducted, one involving postnatal mothers with GDM (n=83), and a second for health professionals (n=46). Seventy-eight percent of mothers were aware that healthy eating, exercise and weight management were all important to reduce risk of subsequent type 2 diabetes. However, 80% of women in this survey were not ready to engage in a postpartum lifestyle intervention within the first 6 months of giving birth; in contrast 52% of health professionals recommended they should be engaged in the first six weeks. Group sessions were the most commonly chosen format to deliver an intervention (30%). A community setting was preferred to a medical one. Mothers wanted recipe ideas (95%) in preference to general dietary advice (76%) or cooking skills courses (39%). Walking was the main form of exercise for 79% of mothers in this sample. Women highlighted difficulty in focusing on their own health goals because of competing demands of looking after a baby (41% agreed, Median 3, IQR 2), tiredness (65% agreed, Md 4, IQR 1) and the need for childcare (64% agreed, Md 4, IQR 2). A walking programme, recipe ideas and weight monitoring may be useful components when designing a postpartum lifestyle intervention. Barriers to engagement are evident and the intervention should allow women to engage at a time that is appropriate for them. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Assessing the Impact and Effectiveness of the Advanced Technological Education (ATE) Program. 2004 Survey Results. Volume I: Evaluation of the ATE Program Design

    Science.gov (United States)

    Hanssen, Carl E.; Gullickson, Arlen R.

    2004-01-01

    This report presents results from the fifth annual survey of Advanced Technological Education (ATE) projects, centers, and articulation partnerships. ATE has approximately 220 active awards. Of these, 163 ATE-funded projects, centers, and articulation partnerships were asked to participate in the 2004 survey. During the survey administration…

  20. Summary of Survey and Workshop Results on Areas of Research in Human Factors for the Design and Operation of New Nuclear Plant Technology - Final Report

    International Nuclear Information System (INIS)

    Persensky, Julius J.; Joe, Jeffrey; Richards, Robert E.; Barnes, Valerie; Gonzalez, Michelle

    2012-01-01

    in Advanced Systems. 4. Management of Unplanned, Unanticipated Events. 5. Human System Interface (HSI) Design Principles for Supporting Operator Cognitive Functions. 6. Complexity Issues in Advanced Systems. 7. Organizational Factors - Safety Culture. 8. Human Factors Engineering (HFE) Methods and Tools. The WGHOF undertook two efforts to respond to recommendations in the TOP. The first was the development and implementation of a survey to identify the level of interest in performing research projects related to the eight research topic areas and to assess the level of interest in collaborating in such research. The second effort was implementation of a workshop to discuss how the use of new human-system technology in the operation of NPPs may affect reliable human performance and plant safety. (authors)

  1. Spatial distribution, sampling precision and survey design optimisation with non-normal variables: The case of anchovy (Engraulis encrasicolus) recruitment in Spanish Mediterranean waters

    Science.gov (United States)

    Tugores, M. Pilar; Iglesias, Magdalena; Oñate, Dolores; Miquel, Joan

    2016-02-01

    In the Mediterranean Sea, the European anchovy (Engraulis encrasicolus) displays a key role in ecological and economical terms. Ensuring stock sustainability requires the provision of crucial information, such as species spatial distribution or unbiased abundance and precision estimates, so that management strategies can be defined (e.g. fishing quotas, temporal closure areas or marine protected areas MPA). Furthermore, the estimation of the precision of global abundance at different sampling intensities can be used for survey design optimisation. Geostatistics provide a priori unbiased estimations of the spatial structure, global abundance and precision for autocorrelated data. However, their application to non-Gaussian data introduces difficulties in the analysis in conjunction with low robustness or unbiasedness. The present study applied intrinsic geostatistics in two dimensions in order to (i) analyse the spatial distribution of anchovy in Spanish Western Mediterranean waters during the species' recruitment season, (ii) produce distribution maps, (iii) estimate global abundance and its precision, (iv) analyse the effect of changing the sampling intensity on the precision of global abundance estimates and, (v) evaluate the effects of several methodological options on the robustness of all the analysed parameters. The results suggested that while the spatial structure was usually non-robust to the tested methodological options when working with the original dataset, it became more robust for the transformed datasets (especially for the log-backtransformed dataset). The global abundance was always highly robust and the global precision was highly or moderately robust to most of the methodological options, except for data transformation.

  2. Using Electronic Surveys: Advice from Survey Professionals.

    Directory of Open Access Journals (Sweden)

    David M. Shannon

    2002-01-01

    Full Text Available The study reports the perceptions and recommendations of sixty-two experienced survey..researchers from the American Educational Research Association regarding the use of..electronic surveys. The most positive aspects cited for the use of electronic surveys were..reduction of costs (i.e., postage, phone charges, the use of electronic mail for pre-notification or..follow-up purposes, and the compatibility of data with existing software programs. These..professionals expressed limitations in using electronic surveys pertaining to the limited..sampling frame as well as issues of confidentiality, privacy, and the credibility of the sample...They advised that electronic surveys designed with the varied technological background and..capabilities of the respondent in mind, follow sound principles of survey construction, and be..administered to pre-notified, targeted populations with published email addresses.

  3. Tutorial on technology transfer and survey design and data collection for measuring Internet and Intranet existence, usage, and impact (survey-2000) in acute care hospitals in the United States.

    Science.gov (United States)

    Hatcher, M

    2001-02-01

    This paper provides a tutorial of technology transfer for management information systems in health care. Additionally it describes the process for a national survey of acute care hospitals using a random sample of 813 hospitals. The purpose of the survey was to measure the levels of Internet and Intranet existence and usage in acute care hospitals. The depth of the survey includes e-commerce for both business to business and with customers. The relationships with systems approaches, user involvement, user satisfaction and decision-making will be studied. Changes with results of a prior survey conducted in 1997 can be studied and enabling and inhabiting factors identified. This information will provide benchmarks for hospitals to plan their network technology position and to set goals.

  4. Diseño y metodología de la Encuesta Nacional de Salud 2000 National Health Survey 2000: design and methodology

    Directory of Open Access Journals (Sweden)

    Jaime Sepúlveda

    2007-01-01

    Full Text Available OBJETIVO: Como parte del Sistema de Encuestas Nacionales de Salud, durante los últimos meses de 1999 y los primeros tres del año 2000 se realizó la Encuesta Nacional de Salud de México (ENSA 2000. Se estudió la accesibilidad, calidad, utilización y cobertura de los Servicios de Salud; de modo adicional se actualizaron los marcadores serológicos de enfermedades infecciosas prevenibles por vacunación, infecciones de transmisión sexual y hepatitis. MATERIAL Y MÉTODOS: Para la ENSA 2000 se seleccionaron tres grupos etarios y a los utilizadores de los servicios de salud. Se captó la información mediante entrevista directa y se tomaron muestras biológicas para análisis clínicos y medidas de parámetros biológicos y somatométricos. El diseño muestral de la ENSA 2000 fue probabilístico, polietápico, estratificado y de conglomerados. El tamaño de la muestra fue de 1 470 viviendas por estado, para un total de 47 040 viviendas a nivel nacional; los factores de expansión se modificaron por la falta de respuesta y la posestratificación. El personal operativo se capacitó y estandarizó para mantener una alta respuesta, en especial para las muestras de sangre. RESULTADOS: En total se obtuvieron 83 157 muestras de sangre de las 94 000 esperadas (respuesta de 88% que se mantuvieron refrigeradas en tanto se ubicaron en el laboratorio del Instituto Nacional de Salud Pública donde se prepararon cuatro alícuotas y se congelaron a -150° C hasta el análisis.OBJECTIVE: The 2000 Mexican National Health Survey (NHS was created as part of the System for National Health Surveys conducted during the last months of 1999 and the first three of 2000. The 2000 NHS is a probabilistic survey of households from which users of health services were selected according to three age groups. Information was gathered through direct interviews with appropriate informants. Biological samples were taken for clinical tests as well as for measuring biological and

  5. Design, Data Collection, Monitoring, Interview Administration Time, and Data Editing in the 1993 National Household Education Survey (NHES:93). Working Paper Series.

    Science.gov (United States)

    Brick, J. Michael; Collins, Mary A.; Nolin, Mary Jo; Davies, Elizabeth; Feibus, Mary L.

    The National Household Education Survey (NHES) is a data collection system of the National Center for Education Statistics that collects and publishes data on the condition of education in the United States. It is a telephone survey of the noninstitutionalized population of the country, and it focuses on issues that are best studied through…

  6. Sport Management Survey. Employment Perspectives.

    Science.gov (United States)

    Quain, Richard J.; Parks, Janet B.

    1986-01-01

    A survey of sport management positions was designed to determine projected vacancy rates in six sport management career areas. Respondents to the survey were also questioned regarding their awareness of college professional preparation programs. Results are presented. (MT)

  7. Towards global benchmarking of food environments and policies to reduce obesity and diet-related non-communicable diseases: design and methods for nation-wide surveys.

    Science.gov (United States)

    Vandevijvere, Stefanie; Swinburn, Boyd

    2014-05-15

    Unhealthy diets are heavily driven by unhealthy food environments. The International Network for Food and Obesity/non-communicable diseases (NCDs) Research, Monitoring and Action Support (INFORMAS) has been established to reduce obesity, NCDs and their related inequalities globally. This paper describes the design and methods of the first-ever, comprehensive national survey on the healthiness of food environments and the public and private sector policies influencing them, as a first step towards global monitoring of food environments and policies. A package of 11 substudies has been identified: (1) food composition, labelling and promotion on food packages; (2) food prices, shelf space and placement of foods in different outlets (mainly supermarkets); (3) food provision in schools/early childhood education (ECE) services and outdoor food promotion around schools/ECE services; (4) density of and proximity to food outlets in communities; food promotion to children via (5) television, (6) magazines, (7) sport club sponsorships, and (8) internet and social media; (9) analysis of the impact of trade and investment agreements on food environments; (10) government policies and actions; and (11) private sector actions and practices. For the substudies on food prices, provision, promotion and retail, 'environmental equity' indicators have been developed to check progress towards reducing diet-related health inequalities. Indicators for these modules will be assessed by tertiles of area deprivation index or school deciles. International 'best practice benchmarks' will be identified, against which to compare progress of countries on improving the healthiness of their food environments and policies. This research is highly original due to the very 'upstream' approach being taken and its direct policy relevance. The detailed protocols will be offered to and adapted for countries of varying size and income in order to establish INFORMAS globally as a new monitoring initiative

  8. Stakeholder Engagement in Trial Design: Survey of Visitors to Critically Ill Patients Regarding Preferences for Outcomes and Treatment Options during Weaning from Mechanical Ventilation.

    Science.gov (United States)

    Burns, Karen E A; Jacob, Sonu Karottaiyamvelil; Aguirre, Valeria; Gomes, Janice; Mehta, Sangeeta; Rizvi, Leena

    2016-11-01

    Stakeholder engagement in research is expected to provide unique insights, make research investments more accountable and transparent, and ensure that future research is applicable to patients and family members. To inform the design of a trial of strategies for weaning from mechanical ventilation, we sought to identify preferences of patient visitors regarding outcome and treatment measures. We conducted an interviewer-administered questionnaire of visitors of critically ill patients in two family waiting rooms serving three intensive care units (ICUs) in Toronto, Canada. Respondents rated the importance of general and ventilation-related outcomes in two hypothetical scenarios (before a first spontaneous breathing trial, and after a failed spontaneous breathing trial) and selected a preferred technique for the breathing trials. With regard to the patient they were visiting, respondents identified the most important outcome to them at ICU admission, during the ICU stay, and at ICU discharge. We analyzed 322 questionnaires (95.5% response rate). All outcomes were highly rated (average range: 7.82-9.74). Across scenarios, outcomes rated as most important were ICU and hospital survival (9.72, 9.70), avoiding complications (9.45), quality of life (9.394), patient comfort (9.393), and returning to previous living arrangements (9.31). Overall, the most important ventilation-related outcomes were being ventilator-free (8.95), avoiding reintubation (8.905), and passing a spontaneous breathing trial (8.903). Passing a spontaneous breathing trial assumed greater importance after an initial failed attempt. "Time to event" outcomes were less important to visitors. We did not identify a preferred spontaneous breathing trial technique. Although ICU survival was the most important outcome at ICU admission and during the ICU stay, visitors rated quality of life higher than hospital survival at ICU discharge. Visitors to critically ill patients prioritized two general outcomes (ICU

  9. EVALUATION OF SUBSOIL RESOURCES, LAND RESOURCES AND SOILS IN THE COURSE OF ENGINEERING AND ECOLOGICAL SURVEYS AT THE DESIGN STAGE OF CONSTRUCTION PROJECTS

    Directory of Open Access Journals (Sweden)

    Platov Nikolaj Aleksandrovich

    2012-10-01

    Full Text Available Effective environmental legislative acts, industrial regulations and Construction Standards and Norms do not comprise a consistent system governing rational use of natural resources. Inconsistency of regulatory acts, unavailability of a single approach or a methodological background backing the development of new and the update of effective regulatory documents causes inconsistency of engineering and ecological information. The inconsistency prevents any competent application and correlation of the information about the condition and properties of the ground and soils. The main objective of an engineering survey is the supply of trustworthy information to teams of designers. The quality of the engineering and ecological information stands behind the safety of buildings and structures. The quality of any environment-related information and data concerning any environmental protection measures is consequent to the quality of regulatory documents. In addition to their role in the built environment, resources of the lithosphere serve as the basis for the development of almost all branches of industry and other types of human activities. Effective legal and regulatory documents ignore the fact that subsoil resources serve as the material and physical basis of the living environment on Earth. Foundations of the Legislation of the USSR and the Union Republics on Subsoil Resources served as the basis for their protection. The successor legislation includes in excess of 40 regulatory documents that govern the extraction of natural resources and losses that accompany the exploitation of their deposits. The principal acts include the Unified Rules Governing Protection of Subsoil Resources in the course of Development of Deposits of Solid Mineral Resources (1985 and other acts approved by the Principal State Technical Supervision Committee; the above Unified Rules have not undergone any substantial changes since the days of the USSR. The exception is the

  10. Web survey methodology

    CERN Document Server

    Callegaro, Mario; Vehovar, Asja

    2015-01-01

    Web Survey Methodology guides the reader through the past fifteen years of research in web survey methodology. It both provides practical guidance on the latest techniques for collecting valid and reliable data and offers a comprehensive overview of research issues. Core topics from preparation to questionnaire design, recruitment testing to analysis and survey software are all covered in a systematic and insightful way. The reader will be exposed to key concepts and key findings in the literature, covering measurement, non-response, adjustments, paradata, and cost issues. The book also discusses the hottest research topics in survey research today, such as internet panels, virtual interviewing, mobile surveys and the integration with passive measurements, e-social sciences, mixed modes and business intelligence. The book is intended for students, practitioners, and researchers in fields such as survey and market research, psychological research, official statistics and customer satisfaction research.

  11. Report on comprehensive surveys of nationwide geothermal resources in fiscal 1979. Conceptual design of a database system; 1979 nendo zenkoku chinetsu shigen sogo chosa hokokusho. Database system gainen sekkei

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-03-31

    Conceptual design was made on a database system as part of the comprehensive surveys of nationwide geothermal resources. Underground hot water in depths of several kilometers close to the ground surface is a utilizable geothermal energy. Exploration using the ground surface survey is much less expensive than the test drilling survey, but has greater error in estimation because of being an indirect method. However, integrating data by freely using a number of exploration methods can improve the accuracy of estimation on the whole. In performing the conceptual design of a geothermal resource information system, the functions of this large scale database were used as the framework. Further data collection, distribution and interactive type man-machine communication, modeling, and environment surveillance functions were incorporated. Considerations were also given on further diversified utilization patterns and on support to users in remote areas and end users. What is important in designing the system is that constituting elements of hardware and software should function while being combined organically as one system, rather than the elements work independently. In addition, sufficient expandability and flexibility are indispensable. (NEDO)

  12. The VANDELS ESO spectroscopic survey

    Science.gov (United States)

    McLure, R. J.; Pentericci, L.; Cimatti, A.; Dunlop, J. S.; Elbaz, D.; Fontana, A.; Nandra, K.; Amorin, R.; Bolzonella, M.; Bongiorno, A.; Carnall, A. C.; Castellano, M.; Cirasuolo, M.; Cucciati, O.; Cullen, F.; De Barros, S.; Finkelstein, S. L.; Fontanot, F.; Franzetti, P.; Fumana, M.; Gargiulo, A.; Garilli, B.; Guaita, L.; Hartley, W. G.; Iovino, A.; Jarvis, M. J.; Juneau, S.; Karman, W.; Maccagni, D.; Marchi, F.; Mármol-Queraltó, E.; Pompei, E.; Pozzetti, L.; Scodeggio, M.; Sommariva, V.; Talia, M.; Almaini, O.; Balestra, I.; Bardelli, S.; Bell, E. F.; Bourne, N.; Bowler, R. A. A.; Brusa, M.; Buitrago, F.; Caputi, K. I.; Cassata, P.; Charlot, S.; Citro, A.; Cresci, G.; Cristiani, S.; Curtis-Lake, E.; Dickinson, M.; Fazio, G. G.; Ferguson, H. C.; Fiore, F.; Franco, M.; Fynbo, J. P. U.; Galametz, A.; Georgakakis, A.; Giavalisco, M.; Grazian, A.; Hathi, N. P.; Jung, I.; Kim, S.; Koekemoer, A. M.; Khusanova, Y.; Le Fèvre, O.; Lotz, J. M.; Mannucci, F.; Maltby, D. T.; Matsuoka, K.; McLeod, D. J.; Mendez-Hernandez, H.; Mendez-Abreu, J.; Mignoli, M.; Moresco, M.; Mortlock, A.; Nonino, M.; Pannella, M.; Papovich, C.; Popesso, P.; Rosario, D. P.; Salvato, M.; Santini, P.; Schaerer, D.; Schreiber, C.; Stark, D. P.; Tasca, L. A. M.; Thomas, R.; Treu, T.; Vanzella, E.; Wild, V.; Williams, C. C.; Zamorani, G.; Zucca, E.

    2018-05-01

    VANDELS is a uniquely-deep spectroscopic survey of high-redshift galaxies with the VIMOS spectrograph on ESO's Very Large Telescope (VLT). The survey has obtained ultra-deep optical (0.48 studies. Using integration times calculated to produce an approximately constant signal-to-noise ratio (20 motivation, survey design and target selection.

  13. Developing the Librarians' Role in Supporting Grant Applications and Reducing Waste in Research: Outcomes from a Literature Review and Survey in the NIHR Research Design Service

    Science.gov (United States)

    Edmunds Otter, Mary L.; Wright, Judy M.; King, Natalie V.

    2017-01-01

    Librarians and information specialists' involvement during the development of grant applications for external funding can save researchers' time, provide specialist support, and contribute to reducing avoidable waste in research. This article presents a survey of information specialists working for the National Institute for Health Research's…

  14. Focusing on What Counts: Using Exploratory Focus Groups to Enhance the Development of an Electronic Survey in a Mixed-Methods Research Design

    Science.gov (United States)

    Galliott, Natal'ya; Graham, Linda J.

    2016-01-01

    This paper illustrates the use of exploratory focus groups to inform the development of a survey instrument in a sequential phase mixed-methods study investigating differences in secondary students' career choice capability. Five focus groups were conducted with 23 Year 10 students in the state of New South Wales, Australia. Analysis of the focus…

  15. THE KMOS3D SURVEY: DESIGN, FIRST RESULTS, AND THE EVOLUTION OF GALAXY KINEMATICS FROM 0.7 ≤ z ≤ 2.7

    International Nuclear Information System (INIS)

    Wisnioski, E.; Förster Schreiber, N. M.; Wuyts, S.; Wuyts, E.; Bandara, K.; Genzel, R.; Bender, R.; Davies, R.; Lang, P.; Mendel, J. T.; Beifiori, A.; Chan, J.; Fabricius, M.; Fudamoto, Y.; Kulkarni, S.; Kurk, J.; Lutz, D.; Wilman, D.; Fossati, M.; Brammer, G.

    2015-01-01

    We present the KMOS 3D survey, a new integral field survey of over 600 galaxies at 0.7 < z < 2.7 using KMOS at the Very Large Telescope. The KMOS 3D survey utilizes synergies with multi-wavelength ground- and space-based surveys to trace the evolution of spatially resolved kinematics and star formation from a homogeneous sample over 5 Gyr of cosmic history. Targets, drawn from a mass-selected parent sample from the 3D-HST survey, cover the star formation-stellar mass (M * ) and rest-frame (U – V) – M * planes uniformly. We describe the selection of targets, the observations, and the data reduction. In the first-year of data we detect Hα emission in 191 M * = 3 × 10 9 -7 × 10 11 M ☉  galaxies at z = 0.7-1.1 and z = 1.9-2.7. In the current sample 83% of the resolved galaxies are rotation dominated, determined from a continuous velocity gradient and v rot /σ 0 > 1, implying that the star-forming ''main sequence'' is primarily composed of rotating galaxies at both redshift regimes. When considering additional stricter criteria, the Hα kinematic maps indicate that at least ∼70% of the resolved galaxies are disk-like systems. Our high-quality KMOS data confirm the elevated velocity dispersions reported in previous integral field spectroscopy studies at z ≳ 0.7. For rotation-dominated disks, the average intrinsic velocity dispersion decreases by a factor of two from 50 km s –1 at z ∼ 2.3 to 25 km s –1 at z ∼ 0.9. Combined with existing results spanning z ∼ 0-3, we show that disk velocity dispersions follow an evolution that is consistent with the dependence of velocity dispersion on gas fractions predicted by marginally stable disk theory

  16. Reader survey

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1993-10-15

    Many, thanks to the hundreds of people who took the time to reply to the CERN Courier readership survey questionnaire published in our May issue. Bringing out a monthly journal is a lonely business. Issue after issue goes out, and the only response is when there's an occasional factual error. Send out a readership survey and a faint echo comes back. Most striking was the sheer enthusiasm of the replies. Despite the current erosion of support in the US (see page 2), subatomic physics has significant world-wide box-office appeal. Most important was to find out who our readers are. 61% of the replies came from Europe, 21% from the USA, 14% from elsewhere, (including the former Soviet Union), and 4% from inside CERN. Not surprisingly, the main audience (37%) is in the high energy physics sector. Then comes teaching (31%), followed closely by accelerators operations and design (12%) and industry (11%). Apart from detailed breakdowns of readership and feedback on the journal's content and style, the replies revealed several major features. Firstly, the CERN Courier is widely read and appreciated. There are a lot of people outside the immediate research field who want to keep broadly up to date with the latest developments in high energy physics and related fields, without getting too involved in details. It was gratifying to receive replies from far-flung places (Nepal, Indonesia,....), and learn how much distant readers appreciate getting such regular information. 'It helps us feel part of the world scene,' was a typical such reply, from Australia. Despite jet airplanes, fax and electronic mail, our planet is still big.

  17. Reader survey

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Many, thanks to the hundreds of people who took the time to reply to the CERN Courier readership survey questionnaire published in our May issue. Bringing out a monthly journal is a lonely business. Issue after issue goes out, and the only response is when there's an occasional factual error. Send out a readership survey and a faint echo comes back. Most striking was the sheer enthusiasm of the replies. Despite the current erosion of support in the US (see page 2), subatomic physics has significant world-wide box-office appeal. Most important was to find out who our readers are. 61% of the replies came from Europe, 21% from the USA, 14% from elsewhere, (including the former Soviet Union), and 4% from inside CERN. Not surprisingly, the main audience (37%) is in the high energy physics sector. Then comes teaching (31%), followed closely by accelerators operations and design (12%) and industry (11%). Apart from detailed breakdowns of readership and feedback on the journal's content and style, the replies revealed several major features. Firstly, the CERN Courier is widely read and appreciated. There are a lot of people outside the immediate research field who want to keep broadly up to date with the latest developments in high energy physics and related fields, without getting too involved in details. It was gratifying to receive replies from far-flung places (Nepal, Indonesia,....), and learn how much distant readers appreciate getting such regular information. 'It helps us feel part of the world scene,' was a typical such reply, from Australia. Despite jet airplanes, fax and electronic mail, our planet is still big

  18. "Suntelligence" Survey

    Science.gov (United States)

    ... to the American Academy of Dermatology's "Suntelligence" sun-smart survey. Please answer the following questions to measure ... be able to view a ranking of major cities suntelligence based on residents' responses to this survey. ...

  19. Professional identity, career choices, and working conditions of future and young dentists in Germany - study design and methods of a nationwide comprehensive survey.

    Science.gov (United States)

    Kettler, Nele; Frenzel Baudisch, Nicolas; Micheelis, Wolfgang; Klingenberger, David; Jordan, A Rainer

    2017-10-18

    Little is known regarding young and future dentists' career choices, professional identity, and working conditions in Germany. While the dental healthcare environment and demands in treatment are changing, it remains unclear what job perceptions young dentists have developed at the beginning of their work life and if and how these perceptions change during the subsequent years. The aim of this study was to survey future and young dentists regarding their professional identity, planned career paths, and working conditions and strains to understand career decisions and choices and enable policy makers to include future dentists' views and expectations in their decisions. This study is a longitudinal nationwide survey over a time span of 4 years of dental students and young dentists in Germany and is comprised of three waves. The first wave focuses on dental students in their final year before the state examination and is composed of a qualitative pre-study in the form of focus groups and a quantitative main survey in the form of a questionnaire. The end points were established to analyse (1) the professional identity of the young future dentists; (2) their career paths, preparation for a career, and basic career conditions; and (3) perceived conditions and strains. The aim of the overall survey was to depict the development of these three aspects during the first years of work life. All of the questions were evaluated with a descriptive univariate analysis. The analysed subgroups were grouped according to gender, target working condition (employed/self-employed), and primary socialisation (parents dentists/parents not dentists). To our knowledge, this is the only study which focuses on career choices, professional identity, and working conditions of future and young dentists in Germany. The longitudinal observation provides information that is essential for professional and purposive dental health care planning, and to meet the oral health demands and needs of the

  20. The development of an upper limb stroke rehabilitation robot: identification of clinical practices and design requirements through a survey of therapists.

    Science.gov (United States)

    Lu, Elaine C; Wang, Rosalie H; Hebert, Debbie; Boger, Jennifer; Galea, Mary P; Mihailidis, Alex

    2011-01-01

    PURPOSE. Timely and adequate rehabilitation after a stroke is crucial to maximising recovery. A way of increasing treatment access could be through robots, which would aid therapists in providing post-stroke rehabilitation. This research sought to discover the needs and preferences of therapists with respect to a robot that focuses on upper limb rehabilitation. Understanding requirements for devices could help to increase integration into clinical practice. METHODS. An international online survey was distributed through professional organisations and e-mail list services to therapists. The survey contained 85 items covering topics such as therapist background and treatment approach, rehabilitation aims and robotic rehabilitation device attributes. RESULTS. Data were analysed for 233 respondents, most of whom were physiotherapists and occupational therapists from Australia, Canada and USA. Top attributes included: facilitating a variety of arm movements, being usable while seated, giving biofeedback to clients, having virtual activities specific to daily living, being useful in-home and having resistance adjustable to client needs. In addition, the device should cost under 6000 USD. CONCLUSIONS. Findings from this survey provide guidance for technology developers regarding therapists' specifications for a robotic device for upper limb rehabilitation. In addition, findings offer a better understanding of how acceptance of such devices may be facilitated.

  1. 3D seismic acquisition design and the processing : a strike survey at the Zafar and Mashal prospective structures, south Caspian basin

    International Nuclear Information System (INIS)

    Christine, Krohn; Tom, Steinhilber; Judy, Amery-Ryland; Emin, Jafarov

    2002-01-01

    Full text : The Zafar-Mashal block is a large exploration contract area in the deep-water sector of the south Caspian Sea, offshore Azerbaijan. This is the second ExxonMobil-affiliate-operated 3D seismic program in Azerbaijan. Pre-survey data quality evaluation of the existing 3D data set at Nakhchivan and 2D seismic lines over Zafar-Mashal raised concerns about imaging problems. Technical solutions were proposed and tested with ray-trace modeling and acquistion of a 2D seismic test program, which included lines oriented in the dip and strike directions relative to the subsurface structure. Processing results demonstrate that with strike orientation, multiples appear more hyperbolic and have a better velocity discrimination compared to the primary reflectors. Removal of multiples by radon filtering is more effective for the strike survey, especially for attenuating the water-bottom multiples and reducing the peg-leg multiples off shallow reflectors. Radon filtering helped to tighten the semblance velocities down to 6 seconds and in some places below. In areas where the primary velocity trend is slow due to presence of shallow gas, multiples remain difficult to differentiate and remove. Problems also remain where mud volcanoes and high impedance, shallow reflectors reduce or eliminate primary seismic signature. Higher signal-to-noise ratios are gained for a survey acquired in the strike direction because of improved multiple mitigation and an increased amount of data included in the 3D migration

  2. Evaluating effectiveness of small group information literacy instruction for Undergraduate Medical Education students using a pre- and post-survey study design.

    Science.gov (United States)

    McClurg, Caitlin; Powelson, Susan; Lang, Eddy; Aghajafari, Fariba; Edworthy, Steven

    2015-06-01

    The Undergraduate Medical Education (UME) programme at the University of Calgary is a three-year programme with a strong emphasis on small group learning. The purpose of our study was to determine whether librarian led small group information literacy instruction, closely integrated with course content and faculty participation, but without a hands on component, was an effective means to convey EBM literacy skills. Five 15-minute EBM information literacy sessions were delivered by three librarians to 12 practicing physician led small groups of 15 students. Students were asked to complete an online survey before and after the sessions. Data analysis was performed through simple descriptive statistics. A total of 144 of 160 students responded to the pre-survey, and 112 students answered the post-survey. Instruction in a small group environment without a mandatory hands on component had a positive impact on student's evidence-based information literacy skills. Students were more likely to consult a librarian and had increased confidence in their abilities to search and find relevant information. Our study demonstrates that student engagement and faculty involvement are effective tools for delivering information literacy skills when working with students in a small group setting outside of a computer classroom. © 2015 Health Libraries Group.

  3. THE KMOS{sup 3D} SURVEY: DESIGN, FIRST RESULTS, AND THE EVOLUTION OF GALAXY KINEMATICS FROM 0.7 ≤ z ≤ 2.7

    Energy Technology Data Exchange (ETDEWEB)

    Wisnioski, E.; Förster Schreiber, N. M.; Wuyts, S.; Wuyts, E.; Bandara, K.; Genzel, R.; Bender, R.; Davies, R.; Lang, P.; Mendel, J. T.; Beifiori, A.; Chan, J.; Fabricius, M.; Fudamoto, Y.; Kulkarni, S.; Kurk, J.; Lutz, D. [Max-Planck-Institut für extraterrestrische Physik (MPE), Giessenbachstr. 1, D-85748 Garching (Germany); Wilman, D.; Fossati, M. [Universitäts-Sternwarte, Ludwig-Maximilians-Universität, Scheinerstrasse 1, D-81679 München (Germany); Brammer, G., E-mail: emily@mpe.mpg.de [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21218 (United States); and others

    2015-02-01

    We present the KMOS{sup 3D} survey, a new integral field survey of over 600 galaxies at 0.7 < z < 2.7 using KMOS at the Very Large Telescope. The KMOS{sup 3D} survey utilizes synergies with multi-wavelength ground- and space-based surveys to trace the evolution of spatially resolved kinematics and star formation from a homogeneous sample over 5 Gyr of cosmic history. Targets, drawn from a mass-selected parent sample from the 3D-HST survey, cover the star formation-stellar mass (M {sub *}) and rest-frame (U – V) – M {sub *} planes uniformly. We describe the selection of targets, the observations, and the data reduction. In the first-year of data we detect Hα emission in 191 M {sub *} = 3 × 10{sup 9}-7 × 10{sup 11} M {sub ☉} galaxies at z = 0.7-1.1 and z = 1.9-2.7. In the current sample 83% of the resolved galaxies are rotation dominated, determined from a continuous velocity gradient and v {sub rot}/σ{sub 0} > 1, implying that the star-forming ''main sequence'' is primarily composed of rotating galaxies at both redshift regimes. When considering additional stricter criteria, the Hα kinematic maps indicate that at least ∼70% of the resolved galaxies are disk-like systems. Our high-quality KMOS data confirm the elevated velocity dispersions reported in previous integral field spectroscopy studies at z ≳ 0.7. For rotation-dominated disks, the average intrinsic velocity dispersion decreases by a factor of two from 50 km s{sup –1}at z ∼ 2.3 to 25 km s{sup –1}at z ∼ 0.9. Combined with existing results spanning z ∼ 0-3, we show that disk velocity dispersions follow an evolution that is consistent with the dependence of velocity dispersion on gas fractions predicted by marginally stable disk theory.

  4. Report for fiscal 1981 on comprehensive survey for nationwide geothermal resources. Survey on radar imaging method - geothermal analysis conception design (Appendix); 1981 nendo zenkoku chinetsu shigen sogo chosa hokokusho. Radar eizoho chosa (chinetsu kaiseki gainen sekkei furoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-10-01

    This paper explains different theoretical calculation methods used in gravity and magnetic force data analysis in geothermal resources survey. Analyzing the gravity data and the magnetic force data is capable of being applied with the potential theory. The increased speed and capacity of recent computers make easier the conversion of data into wave number zone. In relation with heavy magnetic force analysis, the paper explains such items as basic handling, IGRF remainder calculation, methods for topographic correction, conversion of primary and secondary polar magnetism and conversion of pseudo-gravity, coherent analysis, spectral ratio method, estimation of spectra by using MEM, spectrum moment method, heavy magnetic force simultaneously analyzing type modeling, constraint inversion method, and other methods. The paper further explains the sequential approximation method in magnetization calculation, methods for calculating equivalent magnetization distribution (methods by Bhattacharyya and Chan, and Nakatsuka), method for calculating equivalent magnetization distribution (method by O'Brien), primary and secondary polar magnetism conversion relation formulas, and theoretical calculation of spectral ratio. (NEDO)

  5. Survey research.

    Science.gov (United States)

    Alderman, Amy K; Salem, Barbara

    2010-10-01

    Survey research is a unique methodology that can provide insight into individuals' perspectives and experiences and can be collected on a large population-based sample. Specifically, in plastic surgery, survey research can provide patients and providers with accurate and reproducible information to assist with medical decision-making. When using survey methods in research, researchers should develop a conceptual model that explains the relationships of the independent and dependent variables. The items of the survey are of primary importance. Collected data are only useful if they accurately measure the concepts of interest. In addition, administration of the survey must follow basic principles to ensure an adequate response rate and representation of the intended target sample. In this article, the authors review some general concepts important for successful survey research and discuss the many advantages this methodology has for obtaining limitless amounts of valuable information.

  6. The French national survey on food consumption of children under 3 years of age - Nutri-Bébé 2013: design, methodology, population sampling and feeding practices.

    Science.gov (United States)

    Chouraqui, Jean-Pierre; Tavoularis, Gabriel; Emery, Yves; Francou, Aurée; Hébel, Pascale; Bocquet, Magali; Hankard, Régis; Turck, Dominique

    2018-02-01

    To update the data on food consumption and practices in children under 3 years of age in metropolitan France. The Nutri-Bébé 2013 cross-sectional study selected a random sample, according to the quota sampling method. After giving their informed consent, parents had to record the food consumption during three non-consecutive days framed by two face-to-face interviews, using for quantitative information different portion size measurement aids. One thousand one hundred and eighty-four children were enrolled. Mothers' mean age was 30·8 (sd 5·4) years; 38 % were primiparous; 89 % lived with a partner; 60 % had an occupation. Of the infants younger than 4 months, 31 % were breast-fed. One thousand and thirty-five children consumed infant formula followed by growing-up milk in 63 % of them; solid foods were introduced at a mean age of 5·4 (sd 2·13) months. From 8 months onwards, 25 % of children consumed the same foods as their parents on a more or less regular basis; 29 % ate in front of a screen, with a daily average screen time of 43·0 (sd 40·4) min. This robust survey highlights the low prevalence and duration of breast-feeding in France and shows a modest improvement since the previous survey of 2005 in the observance of recommendations concerning other feeding practices. The frequent consumption of adult foods and the screen time are of concern.

  7. Development of a numerical simulation method for melting/solidification and dissolution/precipitation phenomena. 1. Literature survey for computer program design

    International Nuclear Information System (INIS)

    Uchibori, Akihiro; Ohshima, Hiroyuki

    2004-04-01

    Survey research of numerical methods for melting/solidification and dissolution/precipitation phenomena was performed to determine the policy for a simulation program development. Melting/solidification and dissolution/ precipitation have been key issues for feasibility evaluation of several techniques applied in the nuclear fuel cycle processes. Physical models for single-component melting/solidification, two-component solution solidification or precipitation by cooling and precipitation by electrolysis, which are moving boundary problems, were made clear from the literature survey. The transport equations are used for thermal hydraulic analysis in the solid and the liquid regions. Behavior of the solid-liquid interface is described by the heat and mass transfer model. These physical models need to be introduced into the simulation program. The numerical methods for the moving boundary problems are categorized into two types: interface tracking method and interface capturing method. Based on the classification, performance of each numerical method was evaluated. The interface tracking method using the Lagrangian moving mesh requires relatively complicated algorithm. The algorithm has high accuracy for predicting the moving interface. On the other hand, the interface capturing method uses the Eulerian fixing mesh, leading to simple algorithm. Prediction accuracy of the method is relatively low. The extended finite element method classified as the interface capturing method can predict the interface behavior accurately even though the Eulerian fixing mesh is used. We decided to apply the extended finite element method to the simulation program. (author)

  8. Design and operation of ventilation in low energy residences – A survey on code requirements and building reality from six European countries and China

    DEFF Research Database (Denmark)

    del Carmen Bocanegra-Yanez, Maria; Rojas, Gabriel; Zukowska-Tejsen, Daria

    involved in the Annex. There were two main objectives, firstly, to describe and analyse a transition between actual requirements (national building codes and standards) and current practice. Secondly, to investigate current barriers and challenges regarding installation of mechanical ventilation......One of the key objectives of the IEA Annex 68 research programme entitled “Indoor Air Quality Design and Control in Low Energy Residential Buildings” is to provide a generic guideline for the design and operation of ventilation in residential buildings. Modern and refurnished domestic buildings...

  9. The Power Dynamics and Politics of Survey Design: Measuring Workload Associated with Teaching, Administering and Supporting Work-Integrated Learning Courses

    Science.gov (United States)

    Clark, Lindie; Rowe, Anna; Cantori, Alex; Bilgin, Ayse; Mukuria, Valentine

    2016-01-01

    Work-integrated learning (WIL) courses can be more time consuming and resource intensive to design, teach, administer and support than classroom-based courses, as they generally require different curricula and pedagogical approaches as well as additional administrative and pastoral responsibilities. Workload and resourcing issues are reported as…

  10. The Solomon Islands tsunami of 6 February 2013 field survey in the Santa Cruz Islands

    Science.gov (United States)

    Fritz, H. M.; Papantoniou, A.; Biukoto, L.; Albert, G.

    2013-12-01

    On February 6, 2013 at 01:12:27 UTC (local time: UTC+11), a magnitude Mw 8.0 earthquake occurred 70 km to the west of Ndendo Island (Santa Cruz Island) in the Solomon Islands. The under-thrusting earthquake near a 90° bend, where the Australian plate subducts beneath the Pacific plate generated a locally focused tsunami in the Coral Sea and the South Pacific Ocean. The tsunami claimed the lives of 10 people and injured 15, destroyed 588 houses and partially damaged 478 houses, affecting 4,509 people in 1,066 households corresponding to an estimated 37% of the population of Santa Cruz Island. A multi-disciplinary international tsunami survey team (ITST) was deployed within days of the event to document flow depths, runup heights, inundation distances, sediment and coral boulder depositions, land level changes, damage patterns at various scales, performance of the man-made infrastructure and impact on the natural environment. The 19 to 23 February 2013 ITST covered 30 locations on 4 Islands: Ndendo (Santa Cruz), Tomotu Noi (Lord Howe), Nea Tomotu (Trevanion, Malo) and Tinakula. The reconnaissance completely circling Ndendo and Tinakula logged 240 km by small boat and additionally covered 20 km of Ndendo's hard hit western coastline by vehicle. The collected survey data includes more than 80 tsunami runup and flow depth measurements. The tsunami impact peaked at Manoputi on Ndendo's densely populated west coast with maximum tsunami height exceeding 11 m and local flow depths above ground exceeding 7 m. A fast tide-like positive amplitude of 1 m was recorded at Lata wharf inside Graciosa Bay on Ndendo Island and misleadingly reported in the media as representative tsunami height. The stark contrast between the field observations on exposed coastlines and the Lata tide gauge recording highlights the importance of rapid tsunami reconnaissance surveys. Inundation distance and damage more than 500 m inland were recorded at Lata airport on Ndendo Island. Landslides were

  11. Surveys & Programs

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My residential construction. Business Dynamics Statistics (BDS) Provides measures of openings and closings, job

  12. Engineering surveying

    CERN Document Server

    Schofield, W

    2001-01-01

    The aim of Engineering Surveying has always been to impart and develop a clear understanding of the basic topics of the subject. The author has fully revised the book to make it the most up-to-date and relevant textbook available on the subject.The book also contains the latest information on trigonometric levelling, total stations and one-person measuring systems. A new chapter on satellites ensures a firm grasp of this vitally important topic.The text covers engineering surveying modules for civil engineering students on degree courses and forms a reference for the engineering surveying module in land surveying courses. It will also prove to be a valuable reference for practitioners.* Simple clear introduction to surveying for engineers* Explains key techniques and methods* Details reading systems and satellite position fixing

  13. Principal provisions of engineering and geological survey methodology in designing and construction of underground laboratory as a part of facility of RW underground isolation

    International Nuclear Information System (INIS)

    Prokopova, O.A.

    2006-01-01

    The most critical moment is the choice of a site for radioactive waste geological repository. Here the role of engineering and geological prospecting as a basis for the construction of a facility for underground isolation appears especially important; it is followed by finding a suitable area and subsequent allocation of the site and facility construction sites. The decision on the selection of construction site for the underground repository is taken by the principle 'descent from the general to the particular', which is a continuous process with the observance of stages in research for the design and exploration work. Each stage of research is typified by specific scale and methods of geological and geophysical studies and scientific research to be fulfilled in scopes sufficient for solution of basic problems for the designing. (author)

  14. What should be prioritised in the development of an online intervention designed to support midwives in work-related psychological distress? An exploratory Delphi Survey.

    Directory of Open Access Journals (Sweden)

    Sally Pezaro

    2015-09-01

    This study outlines how consensus in the development of an online intervention designed to support midwives in work-related psychological distress may be achieved. Study outcomes will steer the design and development of an intervention, and highlight the most salient themes and elements to be included within an online intervention to support midwives. Midwives are entitled to psychological support, yet this is an area in which a paucity of knowledge in relation to their needs resides. This early research is the first of its kind to highlight the needs of midwives. Its’ vision is to develop an evidence based solution to improve the health and well-being of midwives, as they, in turn, care for our mothers and babies.

  15. Measuring sport experiences in children and youth to better understand the impact of sport on health and positive youth development: designing a brief measure for population health surveys.

    Science.gov (United States)

    Cairney, John; Clark, Heather J; Kwan, Matthew Y W; Bruner, Mark; Tamminen, Katherine

    2018-04-03

    Despite the proliferation of studies examining youth sport participation, there are significant gaps in knowledge regarding the impact of youth sport participation on health and development. These gaps are not new, but have persisted due to limitations with how sport participation is measured. Much of the research to date has measured sport participation as binary (yes/no) or count measures. This has been especially true in survey-based research. Yet, at the same time, research has investigated youths' experiences in sport such as the influence of coaches, teammates, and parents. The ability to measure these experiences is constrained by the need to use a number of measures along with gaps in the content covered in existing measures. We propose to develop and test the Sport Experiences Measure: Children and Youth (SEM:CY) as a population survey-based measure that captures the salient aspects of youths' experience in sport. The SEM:CY will be developed and tested across three phases. Phase I includes qualitative research with members of the sport community and engagement with an expert group to generate and obtain feedback on the initial item pool. In Phase II will recruit two consecutive samples of students from schools to complete the draft measure. Analysis will focus on assessing the items and factor structure of the measure. Factor structure will be assessed first with exploratory factor analysis and then confirmatory factor analysis. In phase III we will test the association between the SEM:CY with a measure of perceived competence, sport anxiety, and positive youth development to assess construct validity. We will also examine whether the structure of the measure varies by age or gender. The SEM:CY measure will provide a meaningful contribution to the measurement and understanding of youth sport participation. The SEM:CY can be used as a stand-alone measure to understand youth experiences in sport programs, or in combination with other health and development

  16. Conducting a Withdrawal Survey.

    Science.gov (United States)

    Aldridge, Sue; Rowley, Jennifer

    2001-01-01

    A survey at Edge Hill College of Higher Education in Canada, designed to be part of the mechanism for monitoring and evaluating the quality of the student experience, revealed that key factors influencing withdrawal were: course not as expected, traveling difficulties, institution not as expected, domestic difficulties, and financial difficulties.…

  17. A Nationwide Survey of Quality of End-of-Life Cancer Care in Designated Cancer Centers, Inpatient Palliative Care Units, and Home Hospices in Japan: The J-HOPE Study.

    Science.gov (United States)

    Miyashita, Mitsunori; Morita, Tatsuya; Sato, Kazuki; Tsuneto, Satoru; Shima, Yasuo

    2015-07-01

    End-of-life (EOL) cancer care in general hospitals and home care has not previously been evaluated in Japan. This study aimed to evaluate EOL cancer care from the perspective of bereaved family members in nationwide designated cancer centers, inpatient palliative care units (PCUs), and home hospices in Japan. We conducted a cross-sectional, anonymous, self-report questionnaire survey for bereaved family members of cancer patients in March 2008 for 56 designated cancer centers and in June 2007 for 100 PCUs and 14 home hospices. Outcomes were overall care satisfaction, structure and process of care (Care Evaluation Scale), and achievement of a good death (Good Death Inventory). In designated cancer centers, PCUs, and home hospices, 2794 (response rate 59%), 5312 (response rate 69%), and 292 (response rate 67%) bereaved family members participated, respectively. Mean scores for overall care satisfaction were high for all places of death, at 4.3 ± 1.2 for designated cancer centers, 5.0 ± 1.2 for PCUs, and 5.0 ± 1.0 for home hospices. Designated cancer centers showed significantly lower ratings than PCUs and home hospices for structure and process of care and achievement of a good death (P = 0.0001 each). Home hospices were rated significantly higher than PCUs for achievement of a good death (P = 0.0001). The main findings of this study were: (1) overall, bereaved family members were satisfied with end-of-life care in all three places of death; (2) designated cancer centers were inferior to PCUs and home hospices and had more room for improvement; and 3) home hospices were rated higher than PCUs for achieving a good death, although home hospices remain uncommon in Japan. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  18. The PdBI arcsecond whirlpool survey (PAWS). I. A cloud-scale/multi-wavelength view of the interstellar medium in a grand-design spiral galaxy

    International Nuclear Information System (INIS)

    Schinnerer, Eva; Meidt, Sharon E.; Hughes, Annie; Colombo, Dario; Pety, Jérôme; Schuster, Karl F.; Dumas, Gaëlle; García-Burillo, Santiago; Dobbs, Clare L.; Leroy, Adam K.; Kramer, Carsten; Thompson, Todd A.; Regan, Michael W.

    2013-01-01

    The Plateau de Bure Interferometer Arcsecond Whirlpool Survey has mapped the molecular gas in the central ∼9 kpc of M51 in its 12 CO(1-0) line emission at a cloud-scale resolution of ∼40 pc using both IRAM telescopes. We utilize this data set to quantitatively characterize the relation of molecular gas (or CO emission) to other tracers of the interstellar medium, star formation, and stellar populations of varying ages. Using two-dimensional maps, a polar cross-correlation technique and pixel-by-pixel diagrams, we find: (1) that (as expected) the distribution of the molecular gas can be linked to different components of the gravitational potential; (2) evidence for a physical link between CO line emission and radio continuum that seems not to be caused by massive stars, but rather depends on the gas density; (3) a close spatial relation between polycyclic aromatic hydrocarbon (PAH) and molecular gas emission, but no predictive power of PAH emission for the molecular gas mass; (4) that the I – H color map is an excellent predictor of the distribution (and to a lesser degree, the brightness) of CO emission; and (5) that the impact of massive (UV-intense) young star-forming regions on the bulk of the molecular gas in central ∼9 kpc cannot be significant due to a complex spatial relation between molecular gas and star-forming regions that ranges from cospatial to spatially offset to absent. The last point, in particular, highlights the importance of galactic environment—and thus the underlying gravitational potential—for the distribution of molecular gas and star formation.

  19. Amostras complexas em inquéritos populacionais: planejamento e implicações na análise estatística dos dados Complex Sampling Design in Population Surveys: Planning and effects on statistical data analysis

    Directory of Open Access Journals (Sweden)

    Célia Landmann Szwarcwald

    2008-05-01

    health status of the population and satisfaction with healthcare from the user's point of view. Most national health surveys do not use simple random sampling, either due to budget restrictions or because time constraints associated with data collection. In general, a combination of several probabilistic sampling methods is used to select a representative sample of the population, which is called complex sampling design. Among the several sampling techniques, the most frequently used are simple random sampling, stratified sampling and cluster sampling. As a result of this process, the next concern is the statistical analysis of the data from complex samples. This paper deals with issues related to data analysis obtained from surveys using complex sampling designs. It discusses the problems that arise when the statistical analysis does not incorporate the sampling design. When the design is neglected, traditional statistical analysis, based on the assumption of simple random sampling, might produce improper results not only for the mean estimates but also for standard errors, thus compromising results, hypothesis testing, and survey conclusions. The World Health Survey (WHS carried out in Brazil, in 2003, is used to exemplify complex sampling methods.

  20. Survey Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Cleaned and QCd data for the Fishing Effort Survey. Questions on fishing and other out are asked on weather and outdoor activity, including fishing trips. Used for...

  1. Surveying Humaness

    DEFF Research Database (Denmark)

    Markussen, Randi; Gad, Christopher

    carried out in a Danish county in order to improve treatment of people who have suffered from long-term illnesses. The surveys concern not only feed back on how people experience their present and past interaction with the social services and health care system; they also ask people to indicate the state......Christopher Gad. Ph.d. Dept. of Information and Media Studies Randi Markussen. Associate Professor, Dept. of Information and Media Studies. rmark@imv.au.dk   Abstract:   Surveying humanness -politics of care improvement   For various reasons we both were subjected to a specific survey procedure...... and development of a large collection of biological and psychological symptoms and psycho-social problems. However, the surveys say nothing about how the information will be of use to the people who answer the procedure or how this scientific intervention will be put to use more specifically within the public...

  2. National Ambulatory Medical Care Survey (NAMCS)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Ambulatory Medical Care Survey (NAMCS) is a national survey designed to meet the need for objective, reliable information about the provision and use of...

  3. FY2001 Customer Satisfaction Survey Report

    National Research Council Canada - National Science Library

    2001-01-01

    ...? To ensure that we gain this requisite knowledge, the 2001 Customer Satisfaction Survey, Part 1 of the two part survey process, was specifically designed to meet the following knowledge objectives...

  4. Quantification of physical activity using the QAPACE Questionnaire: a two stage cluster sample design survey of children and adolescents attending urban school.

    Science.gov (United States)

    Barbosa, Nicolas; Sanchez, Carlos E; Patino, Efrain; Lozano, Benigno; Thalabard, Jean C; LE Bozec, Serge; Rieu, Michel

    2016-05-01

    Quantification of physical activity as energy expenditure is important since youth for the prevention of chronic non communicable diseases in adulthood. It is necessary to quantify physical activity expressed in daily energy expenditure (DEE) in school children and adolescents between 8-16 years, by age, gender and socioeconomic level (SEL) in Bogotá. This is a Two Stage Cluster Survey Sample. From a universe of 4700 schools and 760000 students from three existing socioeconomic levels in Bogotá (low, medium and high). The random sample was 20 schools and 1840 students (904 boys and 936 girls). Foreshadowing desertion of participants and inconsistency in the questionnaire responses, the sample size was increased. Thus, 6 individuals of each gender for each of the nine age groups were selected, resulting in a total sample of 2160 individuals. Selected students filled the QAPACE questionnaire under supervision. The data was analyzed comparing means with multivariate general linear model. Fixed factors used were: gender (boys and girls), age (8 to 16 years old) and tri-strata SEL (low, medium and high); as independent variables were assessed: height, weight, leisure time, expressed in hours/day and dependent variable: daily energy expenditure DEE (kJ.kg-1.day-1): during leisure time (DEE-LT), during school time (DEE-ST), during vacation time (DEE-VT), and total mean DEE per year (DEEm-TY) RESULTS: Differences in DEE by gender, in boys, LT and all DEE, with the SEL all variables were significant; but age-SEL was only significant in DEE-VT. In girls, with the SEL all variables were significant. The post hoc multiple comparisons tests were significant with age using Fisher's Least Significant Difference (LSD) test in all variables. For both genders and for all SELs the values in girls had the higher value except SEL high (5-6) The boys have higher values in DEE-LT, DEE-ST, DEE-VT; except in DEEm-TY in SEL (5-6) In SEL (5-6) all DEEs for both genders are highest. For SEL

  5. Predictors of parents' adherence to home exercise programs for children with developmental disabilities, regarding both exercise frequency and duration: a survey design.

    Science.gov (United States)

    Medina-Mirapeix, Francesc; Lillo-Navarro, Carmen; Montilla-Herrador, Joaquina; Gacto-Sánchez, Mariano; Franco-Sierra, María Á; Escolar-Reina, Pilar

    2017-08-01

    Many families have problems adhering to home exercise programs (HEP) for children with developmental disabilities. However, parental participation in HEP is known to have a positive effect on child-related outcome variables, as well as on parental functioning. This study examined whether the different behaviours of health professionals, and the behaviour and social characteristics of parents determine rates of parental adherence to both the frequency per week, and duration per session, of HEP for children with developmental disabilities attending paediatric services in early intervention centres. In this study, developmental disabilities include those caused by developmental delay or specific health conditions such as cerebral palsy, congenital illness, or others. Survey. Eighteen early intervention centers. Parents of children with developmental disabilities receiving HEP. A self-reported questionnaire was used to examine: whether frequency and duration of weekly exercise sessions was prescribed by physiotherapists; whether the child had received the HEP according to what was prescribed; and items related to the individual, social support, illnesses and the involvement of the health professional. Multiple logistic regression analyses examined their relative relevance. In this study 219 parents participated. The rate of adherence to the prescribed frequency and duration of the HEP was similar (61.4-57.2%). The probability of adherence to both components increased for parents who had a low perception of the existence of barriers for integrating the exercises into their daily routine (OR=2.62 and 4.83). Furthermore, other cognitive factors of parents had a variable influence. The involvement of the professional had a significant impact regarding the frequency of the HEP. Professional involvement increased the probability of exercises being followed accurately by adopting strategies such as: providing information about the progress and evolution of the exercises (OR=3

  6. On Survey Data Analysis in Corporate Finance

    OpenAIRE

    Serita, Toshio

    2008-01-01

    Recently, survey data analysis has emerged as a new method for testing hypotheses andfor clarifying the relative importance of different factors in corporate finance decisions. This paper investigates the advantages and drawbacks of survey data analysis, methodology of survey data analysis such as questionnaire design, and analytical methods for survey data, incomparison with traditional large sample analysis. We show that survey data analysis does not replace traditional large sample analysi...

  7. Precision surveying the principles and geomatics practice

    CERN Document Server

    Ogundare, John Olusegun

    2016-01-01

    A comprehensive overview of high precision surveying, including recent developments in geomatics and their applications This book covers advanced precision surveying techniques, their proper use in engineering and geoscience projects, and their importance in the detailed analysis and evaluation of surveying projects. The early chapters review the fundamentals of precision surveying: the types of surveys; survey observations; standards and specifications; and accuracy assessments for angle, distance and position difference measurement systems. The book also covers network design and 3-D coordinating systems before discussing specialized topics such as structural and ground deformation monitoring techniques and analysis, mining surveys, tunneling surveys, and alignment surveys. Precision Surveying: The Principles and Geomatics Practice: * Covers structural and ground deformation monitoring analysis, advanced techniques in mining and tunneling surveys, and high precision alignment of engineering structures *...

  8. Surveying Education

    DEFF Research Database (Denmark)

    Enemark, Stig

    2009-01-01

    In relation to surveying education there is one big question to be asked: Is the role of the surveyors changing? In a global perspective the answer will be "Yes". There is a big swing that could be entitled "From Measurement to Management". This does not imply that measurement is no longer....... In surveying education there are a range of other challenges to be faced. These relate to the focus on learning to learn; the need for flexible curriculum to deal with constant change; the move towards introducing virtual academy; the demand for creating a quality culture; and the perspective of lifelong...... on an efficient interaction between education, research, and professional practice....

  9. Environmental surveys

    International Nuclear Information System (INIS)

    Costa-Ribeiro, C.

    1977-01-01

    An environmental survey conducted in high natural radioactivity areas and methods used to evaluated radiation doses received by the population are presented. It is shown doses absorved due to ingestion of radioactively contaminated food and water. Exposure to external gamma radiation fields or inhalation of abnormal quantities of natural airborne radioactivity are discussed [pt

  10. Survey < > Creation

    DEFF Research Database (Denmark)

    2017-01-01

    The project, Survey Creation suggests that point cloud models from 3D scans of an existing space can be the source for explorative drawings. By probing into the procedure of 3D laser scanning, it became possible to make use of the available point clouds to both access geometric representation......) and the creation drawing (of the anticipated)....

  11. PEP surveying procedures and equipment

    International Nuclear Information System (INIS)

    Linker, F.

    1982-06-01

    The PEP Survey and Alignment System, which employs both laser-based and optical survey methods, is described. The laser is operated in conjunction with the Tektronix 4051 computer and surveying instruments such as ARM and SAM, system which is designed to automate data input, reduction, and production of alignment instructions. The laser system is used when surveying ring quadrupoles, main bend magnets, sextupoles, and is optional when surveying RF cavities and insertion quadrupoles. Optical methods usually require that data be manually entered into the computer for alignment, but in some cases, an element can be aligned using nominal values of fiducial locations without use of the computer. Optical surveying is used in the alignment of NIT and SIT, low field bend magnets, wigglers, RF cavities, and insertion quadrupoles

  12. ESR teleradiology survey: results.

    Science.gov (United States)

    2016-08-01

    With recent developments of teleradiology technology and services, it has become necessary to better evaluate its extent and use among different countries in Europe. With this goal in mind, the ESR launched two specific surveys intended to gather the current state of adoption and implementation of teleradiology in clinical practice. A special focus on differentiating between insourcing teleradiology services among partners of the same organisation and outsourcing to external services was an essential part of the design of these surveys. The first survey was addressed to 44 national societies of different countries in Europe, while the second survey was intended for all practicing radiologist ESR members. While the results of these surveys reported here may provide a wealth of information to better understand the trends in adoption of teleradiology in Europe, they only represent a snapshot at a certain point in time. The rapid development of telecommunication tools as well as a fundamental change in practice and healthcare economics will certainly influence these observations in the upcoming years. These data, however, will provide objective and relevant parameters for supporting the efforts of experts and policy makers in promoting appropriate criteria and guidelines for adequate use of teleradiology in clinical practice. Main Messages • Understand concepts and challenges of teleradiology • Provide insight into current trends and solutions for teleradiology • Compare differences in teleradiolgy strategies between countries in Europe • Establish a reference on statistical data of usage of teleradiology in Europe.

  13. 2012 Mask Industry Survey

    Science.gov (United States)

    Malloy, Matt; Litt, Lloyd C.

    2012-11-01

    A survey supported by SEMATECH and administered by David Powell Consulting was sent to semiconductor industry leaders to gather information about the mask industry as an objective assessment of its overall condition. The survey was designed with the input of semiconductor company mask technologists and merchant mask suppliers. 2012 marks the 11th consecutive year for the mask industry survey. This year's survey and reporting structure are similar to those of the previous years with minor modifications based on feedback from past years and the need to collect additional data on key topics. Categories include general mask information, mask processing, data and write time, yield and yield loss, delivery times, and maintenance and returns. Within each category are multiple questions that result in a detailed profile of both the business and technical status of the mask industry. Results, initial observations, and key comparisons between the 2011 and 2012 survey responses are shown here, including multiple indications of a shift towards the manufacturing of higher end photomasks.

  14. Readership survey

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    The article reviews the last readership survey, which helped to check readers' reactions and the level and style of the journal. The majority of readers (32 per cent), not surprisingly, work in high energy physics. In fact, if the estimate of the world high energy physics population as some 5000 people is correct, CERN Courier reaches every one of them. The next large category of readers is the teaching profession (21 percent), with industrialists (12 per cent) in third place

  15. The VANDELS ESO public spectroscopic survey

    Science.gov (United States)

    McLure, R. J.; Pentericci, L.; Cimatti, A.; Dunlop, J. S.; Elbaz, D.; Fontana, A.; Nandra, K.; Amorin, R.; Bolzonella, M.; Bongiorno, A.; Carnall, A. C.; Castellano, M.; Cirasuolo, M.; Cucciati, O.; Cullen, F.; De Barros, S.; Finkelstein, S. L.; Fontanot, F.; Franzetti, P.; Fumana, M.; Gargiulo, A.; Garilli, B.; Guaita, L.; Hartley, W. G.; Iovino, A.; Jarvis, M. J.; Juneau, S.; Karman, W.; Maccagni, D.; Marchi, F.; Mármol-Queraltó, E.; Pompei, E.; Pozzetti, L.; Scodeggio, M.; Sommariva, V.; Talia, M.; Almaini, O.; Balestra, I.; Bardelli, S.; Bell, E. F.; Bourne, N.; Bowler, R. A. A.; Brusa, M.; Buitrago, F.; Caputi, K. I.; Cassata, P.; Charlot, S.; Citro, A.; Cresci, G.; Cristiani, S.; Curtis-Lake, E.; Dickinson, M.; Fazio, G. G.; Ferguson, H. C.; Fiore, F.; Franco, M.; Fynbo, J. P. U.; Galametz, A.; Georgakakis, A.; Giavalisco, M.; Grazian, A.; Hathi, N. P.; Jung, I.; Kim, S.; Koekemoer, A. M.; Khusanova, Y.; Fèvre, O. Le; Lotz, J. M.; Mannucci, F.; Maltby, D. T.; Matsuoka, K.; McLeod, D. J.; Mendez-Hernandez, H.; Mendez-Abreu, J.; Mignoli, M.; Moresco, M.; Mortlock, A.; Nonino, M.; Pannella, M.; Papovich, C.; Popesso, P.; Rosario, D. P.; Salvato, M.; Santini, P.; Schaerer, D.; Schreiber, C.; Stark, D. P.; Tasca, L. A. M.; Thomas, R.; Treu, T.; Vanzella, E.; Wild, V.; Williams, C. C.; Zamorani, G.; Zucca, E.

    2018-05-01

    VANDELS is a uniquely-deep spectroscopic survey of high-redshift galaxies with the VIMOS spectrograph on ESO's Very Large Telescope (VLT). The survey has obtained ultra-deep optical (0.48 studies. Using integration times calculated to produce an approximately constant signal-to-noise ratio (20 motivation, survey design and target selection.

  16. 78 FR 20119 - Broad Stakeholder Survey

    Science.gov (United States)

    2013-04-03

    ... DEPARTMENT OF HOMELAND SECURITY [Docket No. DHS-2012-0042] Broad Stakeholder Survey AGENCY... concerning the Broad Stakeholder Survey. DHS previously published this ICR in the Federal Register on August... across the Nation. The Broad Stakeholder Survey is designed to gather stakeholder feedback on the...

  17. A Life in the Universe Survey

    Science.gov (United States)

    LoPresto, Michael C.; Hubble-Zdanowski, Jennifer

    2012-01-01

    The "Life in the Universe Survey" is a twelve-question assessment instrument. Largely based on the factors of the Drake equation, it is designed to survey students' initial estimates of its factors and to gauge how estimates change with instruction. The survey was used in sections of a seminar course focusing specifically on life in the universe…

  18. Terminating Sequential Delphi Survey Data Collection

    Science.gov (United States)

    Kalaian, Sema A.; Kasim, Rafa M.

    2012-01-01

    The Delphi survey technique is an iterative mail or electronic (e-mail or web-based) survey method used to obtain agreement or consensus among a group of experts in a specific field on a particular issue through a well-designed and systematic multiple sequential rounds of survey administrations. Each of the multiple rounds of the Delphi survey…

  19. Multiple Surveys of Students and Survey Fatigue

    Science.gov (United States)

    Porter, Stephen R.; Whitcomb, Michael E.; Weitzer, William H.

    2004-01-01

    This chapter reviews the literature on survey fatigue and summarizes a research project that indicates that administering multiple surveys in one academic year can significantly suppress response rates in later surveys. (Contains 4 tables.)

  20. Windscale pile core surveys

    International Nuclear Information System (INIS)

    Curtis, R.F.; Mathews, R.F.

    1996-01-01

    The two Windscale Piles were closed down, defueled as far as possible and mothballed for thirty years following a fire in the core of Pile 1 in 1957 resulting from the spontaneous release of stored Wigner energy in the graphite moderator. Decommissioning of the reactors commenced in 1987 and has reached the stage where the condition of both cores needs to be determined. To this end, non-intrusive and intrusive surveys and sampling of the cores have been planned and partly implemented. The objectives for each Pile differ slightly. The location and quantity of fuel remaining in the damaged core of Pile 1 needed to be established, whereas the removal of all fuel from Pile 2 needed to be confirmed. In Pile 1, the possible existence of a void in the core is to be explored and in Pile 2, the level of Wigner energy remaining required to be quantified. Levels of radioactivity in both cores needed to be measured. The planning of the surveys is described including strategy, design, safety case preparation and the remote handling and viewing equipment required to carry out the inspection, sampling and monitoring work. The results from the completed non-intrusive survey of Pile 2 are summarised. They confirm that the core is empty and the graphite is in good condition. The survey of Pile 1 has just started. (UK)

  1. Semi-customizing patient surveys

    DEFF Research Database (Denmark)

    Riiskjær, Erik; Ammentorp, Jette; Nielsen, Jørn Flohr

    2011-01-01

    Objective. The study investigated the needs and consequences of semi-customizing patient satisfaction surveys to low organizational levels and explored whether patient satisfaction was correlated with local organizational conditions. Design. From 1999 to 2006, the County of Aarhus carried out 398....... Establishing a link between patient satisfaction and organizational variables broadens the quality development focus to include more than simply analysis of specific questions. Semi-customizing patient surveys are recommended....... surveys during four rounds in eight hospitals. To explain differences between the wards, data on the 40 wards with the best and the 40 wards with the worst evaluations (identified by patient surveys) were compared with the data from job satisfaction surveys and management information systems. Setting...

  2. Marketing Research Using Online Surveys

    Directory of Open Access Journals (Sweden)

    Landoy A.

    2009-12-01

    Full Text Available In this article, quality criteria for electronic survey design and use based on an investigation of recent electronic survey literature are presented. The results show that a hard-to-reach audience can be reached using the quality criteria that are most important for reaching these types of audiences. It is presented one online questionnaire for the academic staff community at Transilvania university of Brasov, Romania. The Limerik one was tested.

  3. Designs 2002 further computational and constructive design theory

    CERN Document Server

    2003-01-01

    This volume is a sequel to the 1996 compilation, Computational and Constructive Design Theory. It contains research papers and surveys of recent research work on two closely related aspects of the study of combinatorial designs: design construction and computer-aided study of designs. Audience: This volume is suitable for researchers in the theory of combinatorial designs

  4. Geophex airborne unmanned survey system

    International Nuclear Information System (INIS)

    Won, I.J.; Taylor, D.W.A.

    1995-01-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This nonintrusive system will provide open-quotes stand-offclose quotes capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits two operators to rapidly conduct geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance, of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak anomalies can be detected

  5. Geophex airborne unmanned survey system

    Energy Technology Data Exchange (ETDEWEB)

    Won, I.J.; Taylor, D.W.A.

    1995-03-01

    The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This nonintrusive system will provide {open_quotes}stand-off{close_quotes} capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. This system permits two operators to rapidly conduct geophysical characterization of hazardous environmental sites. During a survey, the operators remain remote from, but within visual distance, of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak anomalies can be detected.

  6. Design Methodology - Design Synthesis

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup

    2003-01-01

    Design Methodology is part of our practice and our knowledge about designing, and it has been strongly supported by the establishing and work of a design research community. The aim of this article is to broaden the reader¿s view of designing and Design Methodology. This is done by sketching...... the development of Design Methodology through time and sketching some important approaches and methods. The development is mainly forced by changing industrial condition, by the growth of IT support for designing, but also by the growth of insight into designing created by design researchers.......ABSTRACT Design Methodology shall be seen as our understanding of how to design; it is an early (emerging late 60ies) and original articulation of teachable and learnable methodics. The insight is based upon two sources: the nature of the designed artefacts and the nature of human designing. Today...

  7. Strategic survey framework for the Northwest Forest Plan survey and manage program.

    Science.gov (United States)

    Randy Molina; Dan McKenzie; Robin Lesher; Jan Ford; Jim Alegria; Richard Cutler

    2003-01-01

    This document outlines an iterative process for assessing the information needs for all Northwest Forest Plan (NWFP) survey and manage species, designing and implementing strategic surveys (including field surveys and other information-gathering processes), and analyzing that information for use in the NWFP annual species review and adaptive-management processes. The...

  8. Designing Material Materialising Design

    DEFF Research Database (Denmark)

    Nicholas, Paul

    2013-01-01

    Designing Material Materialising Design documents five projects developed at the Centre for Information Technology and Architecture (CITA) at the Royal Danish Academy of Fine Arts, School of Architecture. These projects explore the idea that new designed materials might require new design methods....... Focusing on fibre reinforced composites, this book sustains an exploration into the design and making of elastically tailored architectural structures that rely on the use of computational design to predict sensitive interdependencies between geometry and behaviour. Developing novel concepts...

  9. Spectroscopic surveys of LAMOST

    International Nuclear Information System (INIS)

    Zhao Yongheng

    2015-01-01

    The Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST), a new type of reflecting Schmidt telescope, has been designed and produced in China. It marks a breakthrough for large scale spectroscopic survey observation in that both large aperture and wide field of view have been achieved. LAMOST has the highest spectrum acquisition rate, and from October 2011 to June 2014 it has obtained 4.13 million spectra of celestial objects, of which 3.78 million are spectra of stars, with the stellar parameters of 2.20 million stars included. (author)

  10. Achievement report on the incoming projects related to ITS. Research and survey involving 'Research and development of universal design vehicle based on ITS technology'; ITS renkei kokei project an. 'ITS gijutsu wo tenkaishita universal design vehicle no kenkyu kaihatsu' ni kakawaru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    For the promotion of 'Report on Strategy of Automobile Industrial Technologies - Strategy 2 - Promotion of Development of Vehicle Environment Recognition Technology and Driver's State Detection Technology,' investigations and studies including overseas surveys are conducted over six selected subjects which are (1) ITS (Intelligent Transportation System) and VCSS (Voice Communications Switching System), (2) old people, handicapped people, and universal design, (3) intelligent interface, (4) techniques of assessing bionic data and load of driving, (5) driving simulator and virtual reality, and (6) data communication, mobile data communication in particular. It is then found that, on the assumption that there exists a mobile communications environment such as ITS or Internet aboard the automobile, it is important to develop a universal design automobile which adapts itself to the driver thereby respecting driver's viewpoint and that such is to be accomplished by grasping driver's characteristics especially under extraordinary conditions in the way of Kansei engineering and by redesigning the driver's operating system making use of the active interface technology. A conclusion is reached that development should continue in compliance with the separately specified 6 items which are indispensable for the research and development of an ITS based man-adaptive automobile. (NEDO)

  11. Achievement report on the incoming projects related to ITS. Research and survey involving 'Research and development of universal design vehicle based on ITS technology'; ITS renkei kokei project an. 'ITS gijutsu wo tenkaishita universal design vehicle no kenkyu kaihatsu' ni kakawaru kenkyu chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-02-01

    For the promotion of 'Report on Strategy of Automobile Industrial Technologies - Strategy 2 - Promotion of Development of Vehicle Environment Recognition Technology and Driver's State Detection Technology,' investigations and studies including overseas surveys are conducted over six selected subjects which are (1) ITS (Intelligent Transportation System) and VCSS (Voice Communications Switching System), (2) old people, handicapped people, and universal design, (3) intelligent interface, (4) techniques of assessing bionic data and load of driving, (5) driving simulator and virtual reality, and (6) data communication, mobile data communication in particular. It is then found that, on the assumption that there exists a mobile communications environment such as ITS or Internet aboard the automobile, it is important to develop a universal design automobile which adapts itself to the driver thereby respecting driver's viewpoint and that such is to be accomplished by grasping driver's characteristics especially under extraordinary conditions in the way of Kansei engineering and by redesigning the driver's operating system making use of the active interface technology. A conclusion is reached that development should continue in compliance with the separately specified 6 items which are indispensable for the research and development of an ITS based man-adaptive automobile. (NEDO)

  12. UX Design Innovation

    DEFF Research Database (Denmark)

    Dove, Graham; Halskov, Kim; Forlizzi, Jodi

    2017-01-01

    be because it is a new and difficult design material. To better understand why we have witnessed little design innovation, we conducted a survey of current UX practitioners with regards to how new ML services are envisioned and developed in UX practice. Our survey probed on how ML may or may not have been...... a part of their UX design education, on how they work to create new things with developers, and on the challenges they have faced working with this material. We use the findings from this survey and our review of related literature to present a series of challenges for UX and interaction design research...... and education. Finally, we discuss areas where new research and new curriculum might help our community unlock the power of design thinking to re-imagine what ML might be and might do....

  13. Literature survey

    International Nuclear Information System (INIS)

    Drury, J.S.; Michelson, D.; Ensminger, J.T.

    1982-01-01

    Literature was searched for methods of removing uranium from drinking water. No relevant papers were found, but approximately 1000 publications were identified in a less specific search for methods of removing uranium from water. Most of the latter publications dealt with the recovery of uranium from ores, industrial and analytical chemistry solutions, or seawater. The conditions under which these studies were performed were usually quite different from those normally occurring in municipal water treatment practice, but some potentially interesting systems of recovery were identified. A few papers addressed the problem of removing uranium from natural fresh waters and established the effectiveness of using adsorbents or coprecipitants, such as aluminum hydroxide, ferric hydroxide, activated carbon, and ion exchangers, under certain conditions. Also, many US manufacturers and users of water treatment equipment and products were contacted regarding recommended methods of removing uranium from potable water. Based on the results of these surveys, it is recommended that untreated, partially treated, and finished water samples from municipal water treatment facilities be analyzed to determine their extent of removal of uranium by presently used procedures. In addition, laboratory studies are suggested to determine what changes, if any, are needed to maximize the effectiveness of treatments that are already in use in existing water treatment plants

  14. Assessing usual dietary intake in complex sample design surveys: the National Dietary Survey Evaluación del consumo alimentario usual en investigaciones con muestras complejas: pesquisa nacional de alimentación Avaliação do consumo alimentar usual em pesquisas com amostras complexas: Inquérito Nacional de Alimentação

    Directory of Open Access Journals (Sweden)

    Washington Leite Junger

    2013-02-01

    Full Text Available The National Cancer Institute (NCI method allows the distributions of usual intake of nutrients and foods to be estimated. This method can be used in complex surveys. However, the user must perform additional calculations, such as balanced repeated replication (BRR, in order to obtain standard errors and confidence intervals for the percentiles and mean from the distribution of usual intake. The objective is to highlight adaptations of the NCI method using data from the National Dietary Survey. The application of the NCI method was exemplified analyzing the total energy (kcal and fruit (g intake, comparing estimations of mean and standard deviation that were based on the complex design of the Brazilian survey with those assuming simple random sample. Although means point estimates were similar, estimates of standard error using the complex design increased by up to 60% compared to simple random sample. Thus, for valid estimates of food and energy intake for the population, all of the sampling characteristics of the surveys should be taken into account because when these characteristics are neglected, statistical analysis may produce underestimated standard errors that would compromise the results and the conclusions of the survey.El objetivo del estudio fue indicar una adaptación del método del Instituto Nacional del Cáncer (NCI, utilizándose datos de la pesquisa nacional de alimentación. Ese método estima la distribución del consumo usual de nutrientes y alimentos y puede ser aplicado en estudios con muestra compleja. Mientras, son necesarios cálculos adicionales, tales como la replicación repetida balanceada, a fin de obtener los errores estándar e intervalos de confianza para los percentiles y el promedio de la distribución de consumo usual. La aplicación de este método fue ejemplificado analizando el total de energía (Kcal y frutas (gr, comparando las estimaciones de los promedios y sus respectivos errores estándar obtenidos

  15. Geophex Airborne Unmanned Survey System

    International Nuclear Information System (INIS)

    Won, I.L.; Keiswetter, D.

    1995-01-01

    Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results

  16. Geophex Airborne Unmanned Survey System

    Energy Technology Data Exchange (ETDEWEB)

    Won, I.L.; Keiswetter, D.

    1995-12-31

    Ground-based surveys place personnel at risk due to the proximity of buried unexploded ordnance (UXO) items or by exposure to radioactive materials and hazardous chemicals. The purpose of this effort is to design, construct, and evaluate a portable, remotely-piloted, airborne, geophysical survey system. This non-intrusive system will provide stand-off capability to conduct surveys and detect buried objects, structures, and conditions of interest at hazardous locations. During a survey, the operators remain remote from, but within visual distance of, the site. The sensor system never contacts the Earth, but can be positioned near the ground so that weak geophysical anomalies can be detected. The Geophex Airborne Unmanned Survey System (GAUSS) is designed to detect and locate small-scale anomalies at hazardous sites using magnetic and electromagnetic survey techniques. The system consists of a remotely-piloted, radio-controlled, model helicopter (RCH) with flight computer, light-weight geophysical sensors, an electronic positioning system, a data telemetry system, and a computer base-station. The report describes GAUSS and its test results.

  17. Development and Validation of a Novice Teacher and Supervisor Survey

    Science.gov (United States)

    Finster, Matthew

    2017-01-01

    This brief presents initial evidence about the reliability and validity of a novice teacher survey and a novice teacher supervisor survey. The novice teacher and novice teacher supervisor surveys assess how well prepared novice teachers are to meet the job requirements of teaching. The surveys are designed to provide educator preparation programs…

  18. Robotic and Survey Telescopes

    Science.gov (United States)

    Woźniak, Przemysław

    Robotic telescopes are revolutionizing the way astronomers collect their dataand conduct sky surveys. This chapter begins with a discussion of principles thatguide the process of designing, constructing, and operating telescopes andobservatories that offer a varying degree of automation, from instruments remotelycontrolled by observers to fully autonomous systems requiring no humansupervision during their normal operations. Emphasis is placed on designtrade-offs involved in building end-to-end systems intended for a wide range ofscience applications. The second part of the chapter contains descriptions ofseveral projects and instruments, both existing and currently under development.It is an attempt to provide a representative selection of actual systems thatillustrates state of the art in technology, as well as important ideas and milestonesin the development of the field. The list of presented instruments spans the fullrange in size starting from small all-sky monitors, through midrange robotic andsurvey telescopes, and finishing with large robotic instruments and surveys.Explosive growth of telescope networking is enabling entirely new modesof interaction between the survey and follow-up observing. Increasingimportance of standardized communication protocols and software is stressed.These developments are driven by the fusion of robotic telescope hardware,massive storage and databases, real-time knowledge extraction, and datacross-correlation on a global scale. The chapter concludes with examplesof major science results enabled by these new technologies and futureprospects.

  19. Western states uranium resource survey

    International Nuclear Information System (INIS)

    Tinney, J.F.

    1977-01-01

    ERDA's National Uranium Resource Evaluation (NURE) program was established to provide a comprehensive description of uranium resources in the United States. To carry out this task, ERDA has contracted with various facilities, including universities, private companies, and state agencies, to undertake projects such as airborne radiometric surveys, geological and geochemical studies, and the development of advanced geophysical technology. LLL is one of four ERDA laboratories systematically studying uranium distribution in surface water, groundwater, and lake and stream sediments. We are specifically responsible for surveying seven western states. This past year we have designed and installed facilities for delayed-neutron counting and neutron-activation analysis, completed seven orientation surveys, and analyzed several thousand field samples. Full-scale reconnaissance surveys began last fall

  20. Evaluation in participatory design

    DEFF Research Database (Denmark)

    Bossen, Claus; Dindler, Christian; Iversen, Ole Sejer

    2016-01-01

    his paper focuses on evaluation in Participatory Design (PD), and especially upon how the central aims of mutual learning, empowerment, democracy and workplace quality have been assessed. We surveyed all Participatory Design Conference papers (1990-2014) and papers from special journal issues on PD...

  1. Coral reef surveys in India

    Digital Repository Service at National Institute of Oceanography (India)

    Wafar, M.V.M.

    and in persuading the Government agencies to take protective and conservational measures. The current approach is towards establishing a monitoring design to detect changes in reef ecology in the long-term, and to standardize the survey techniques to be compatible...

  2. Euro Heart Survey 2009 Snapshot

    DEFF Research Database (Denmark)

    Puymirat, Etienne; Battler, Alex; Birkhead, John

    2013-01-01

    Detailed data on patients admitted for acute myocardial infarction (AMI) on a European-wide basis are lacking. The Euro Heart Survey 2009 Snapshot was designed to assess characteristics, management, and hospital outcomes of AMI patients throughout European Society of Cardiology (ESC) member...

  3. Water Quality attainment Information from Clean Water Act Statewide Statistical Surveys

    Data.gov (United States)

    U.S. Environmental Protection Agency — Designated uses assessed by statewide statistical surveys and their state and national attainment categories. Statewide statistical surveys are water quality...

  4. Designing Communication Design

    DEFF Research Database (Denmark)

    Løvlie, Anders Sundnes

    2016-01-01

    Innovating in the field of new media genres requires methods for producing designs that can succeed in being disseminated and used outside of design research labs. This article uses the author's experiences with the development of university courses in communication design to address the research...... question: How can we design courses to give students the competencies they need to work as designers of new media? Based on existing approaches from UX design and other fields, I present a model that has demonstrated its usefulness in the development of commercial products and services. The model...

  5. A practical guide to surveys and questionnaires.

    Science.gov (United States)

    Slattery, Eric L; Voelker, Courtney C J; Nussenbaum, Brian; Rich, Jason T; Paniello, Randal C; Neely, J Gail

    2011-06-01

    Surveys with questionnaires play a vital role in decision and policy making in society. Within medicine, including otolaryngology, surveys with questionnaires may be the only method for gathering data on rare or unusual events. In addition, questionnaires can be developed and validated to be used as outcome measures in clinical trials and other clinical research architecture. Consequently, it is fundamentally important that such tools be properly developed and validated. Just asking questions that have not gone through rigorous design and development may be misleading and unfair at best; at worst, they can result in under- or overtreatment and unnecessary expense. Furthermore, it is important that consumers of the data produced by these instruments understand the principles of questionnaire design to interpret results in an optimal and meaningful way. This article presents a practical guide for understanding the methodologies of survey and questionnaire design, including the concepts of validity and reliability, how surveys are administered and implemented, and, finally, biases and pitfalls of surveys.

  6. National Household Survey on Drug Abuse (NHSDA-1999)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Household Survey on Drug Abuse (NHSDA) series measures the prevalence and correlates of drug use in the United States. The surveys are designed to...

  7. National Household Survey on Drug Abuse (NHSDA-1998)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Household Survey on Drug Abuse (NHSDA) series measures the prevalence and correlates of drug use in the United States. The surveys are designed to...

  8. National Mental Health Services Survey (N-MHSS-2010)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Mental Health Services Survey (N-MHSS) is an annual survey designed to collect statistical information on the numbers and characteristics of all known...

  9. A survey of hospital outpatient services for chronic diseases in ...

    African Journals Online (AJOL)

    A survey of hospital outpatient services for chronic diseases in Gauteng. ... aspects of the organisation of services, and indirect indicators of patient care. Design. A postal survey of services for asthma, epilepsy, diabetes and hypertension at ...

  10. National Household Survey on Drug Abuse (NHSDA-2001)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Household Survey on Drug Abuse (NHSDA) series measures the prevalence and correlates of drug use in the United States. The surveys are designed to...

  11. National Household Survey on Drug Abuse (NHSDA-2000)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Household Survey on Drug Abuse (NHSDA) series measures the prevalence and correlates of drug use in the United States. The surveys are designed to...

  12. Alumni Perspectives Survey, 2010. Survey Report

    Science.gov (United States)

    Sheikh, Sabeen

    2010-01-01

    During the months of April and September of 2009, the Graduate Management Admission Council[R] (GMAC[R]) conducted the Alumni Perspectives Survey, a longitudinal study of prior respondents to the Global Management Education Graduate Survey of management students nearing graduation. A total of 3,708 alumni responded to the April 2009 survey,…

  13. Surveys and questionnaires in nursing research.

    Science.gov (United States)

    Timmins, Fiona

    2015-06-17

    Surveys and questionnaires are often used in nursing research to elicit the views of large groups of people to develop the nursing knowledge base. This article provides an overview of survey and questionnaire use in nursing research, clarifies the place of the questionnaire as a data collection tool in quantitative research design and provides information and advice about best practice in the development of quantitative surveys and questionnaires.

  14. Traffic Dynamics on Complex Networks: A Survey

    Directory of Open Access Journals (Sweden)

    Shengyong Chen

    2012-01-01

    Full Text Available Traffic dynamics on complex networks are intriguing in recent years due to their practical implications in real communication networks. In this survey, we give a brief review of studies on traffic routing dynamics on complex networks. Strategies for improving transport efficiency, including designing efficient routing strategies and making appropriate adjustments to the underlying network structure, are introduced in this survey. Finally, a few open problems are discussed in this survey.

  15. Lesotho - Enterprise Survey

    Data.gov (United States)

    Millennium Challenge Corporation — The 2011 MCA-Lesotho baseline enterprise survey is a national survey of enterprises. The main objective of the survey was to assess the current status of businesses...

  16. 2015 Community Survey Data

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — These are the answers to the 2015 Community Survey.A comprehensive summary of the survey results can be found here.The survey asked town members to address their...

  17. Multidisciplinary eHealth Survey Evaluation Methods

    Science.gov (United States)

    Karras, Bryant T.; Tufano, James T.

    2006-01-01

    This paper describes the development process of an evaluation framework for describing and comparing web survey tools. We believe that this approach will help shape the design, development, deployment, and evaluation of population-based health interventions. A conceptual framework for describing and evaluating web survey systems will enable the…

  18. Appalachian National Scenic Trail pilot survey

    Science.gov (United States)

    Stan Zarnoch; Michael Bowker; Ken Cordell; Matt Owens; Gary T. Green; Allison Ginn

    2011-01-01

    Visitation statistics on the Appalachian National Scenic Trail (AT) are important for management and Federal Government reporting purposes. However, no survey methodology has been developed to obtain accurate trailwide estimates over linear trails that traverse many hundreds of back-country miles. This research develops a stratified random survey design which utilizes...

  19. Survey Research: Methods, Issues and the Future

    Science.gov (United States)

    Brewer, Ernest W.; Torrisi-Steele, Geraldine; Wang, Victor C. X.

    2015-01-01

    Survey research is prevalent among many professional fields. Both cost effective and time efficient, this method of research is commonly used for the purposes of gaining insight into the attitudes, thoughts, and opinions of populations. Additionally, because there are several types of survey research designs and data collection instruments, the…

  20. Using Electronic Mail to Conduct Survey Research.

    Science.gov (United States)

    Thach, Liz

    1995-01-01

    Describes public and private online networks and the characteristics of electronic mail. Reviews the literature on survey research conducted via electronic mail, and examines the issues of design, implementation, and response. A table displays advantages and disadvantages of electronic mail surveys. (AEF)

  1. 1979 Reserve Force Studies Surveys: Survey Design, Sample Design and Administrative Procedures,

    Science.gov (United States)

    1981-08-01

    Webster NY 14580 35 29 R064 Q43AA R 11 SC Des Moines IA 50315 109 60 R125 Q7ZAA R 11 AG Tifton GA 31794 9 70 R027 Q9XAA R 11 QM Helena MT 59601 21 23...NY 12208 8 46 GIB PCNBO AR 1 AR Palmdale CA 33550 2 68 GO PCQBO AR I AR San Diego CA 2111 78 6 G106 PC2CO AR 1 AR Dalton GA 30720 88 82 G08 PDZBO AR 1...NY 12401 51 47 G016 PCEAO R 4 FA Culver City CA 90230 94 52 G184 a PCKAO R 4 IN Visalia CA 93277 G197 a PDACO R 4 IN Eastman GA 31810 G130 PDGCO R 4 FA

  2. Guam Boat-based Creel Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Similar to other boat-based survey in basic design, this system is run by the Div. of Aquatic and Wildlife Resources (DAWR) and has been in operation since about...

  3. National Health and Nutrition Examination Survey (NHANES)

    Data.gov (United States)

    U.S. Department of Health & Human Services — 1999-2000 forward. The National Health and Nutrition Examination Survey (NHANES) is a program of studies designed to assess the health and nutritional status of...

  4. SWFSC/MMTD: Vaquita Abundance Survey 1997

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — In 1997, the Southwest Fisheries Science Center (SWFSC) conducted a survey designed to estimate the abundance of vaquita, the Gulf of California harbor porpoise...

  5. National Hospital Ambulatory Medical Care Survey

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Hospital Ambulatory Medical Care Survey (NHAMCS) is designed to collect data on the utilization and provision of ambulatory care services in hospital...

  6. A Survey of Collectives

    Science.gov (United States)

    Tumer, Kagan; Wolpert, David

    2004-01-01

    Due to the increasing sophistication and miniaturization of computational components, complex, distributed systems of interacting agents are becoming ubiquitous. Such systems, where each agent aims to optimize its own performance, but where there is a well-defined set of system-level performance criteria, are called collectives. The fundamental problem in analyzing/designing such systems is in determining how the combined actions of self-interested agents leads to 'coordinated' behavior on a iarge scale. Examples of artificial systems which exhibit such behavior include packet routing across a data network, control of an array of communication satellites, coordination of multiple deployables, and dynamic job scheduling across a distributed computer grid. Examples of natural systems include ecosystems, economies, and the organelles within a living cell. No current scientific discipline provides a thorough understanding of the relation between the structure of collectives and how well they meet their overall performance criteria. Although still very young, research on collectives has resulted in successes both in understanding and designing such systems. It is eqected that as it matures and draws upon other disciplines related to collectives, this field will greatly expand the range of computationally addressable tasks. Moreover, in addition to drawing on them, such a fully developed field of collective intelligence may provide insight into already established scientific fields, such as mechanism design, economics, game theory, and population biology. This chapter provides a survey to the emerging science of collectives.

  7. Soldier Survey Data Book

    Science.gov (United States)

    1991-07-01

    programs and policies and to increase the knowledge base needed for informed decisionmaking. Data for the soldier survey were collected in on-site...Subsequent analyses will be prepared in the form of reports and other materials designed to meet the needs of Army program and policy staff and other...743 * -C Mm C mm l W G gi’ 4.18L. 1 mmI 2In m -P 6- C-4 , 4. C14 u Cc 3 4.1 41 4.1 - C I-D 6. 1 +5 4.1 4-- C-4 RO C4 r ’ C-4, CD 0 f33 Es *i C5 W CNCD

  8. The BUFFALO HST Survey

    Science.gov (United States)

    Steinhardt, Charles; Jauzac, Mathilde; Capak, Peter; Koekemoer, Anton; Oesch, Pascal; Richard, Johan; Sharon, Keren q.; BUFFALO

    2018-01-01

    Beyond Ultra-deep Frontier Fields And Legacy Observations (BUFFALO) is an astronomical survey built around the six Hubble Space Telescope (HST) Frontier Fields clusters designed to learn about early galactic assembly and clustering and prepare targets for observations with the James Webb Space Telescope. BUFFALO will place significant new constraints on how and when the most massive and luminous galaxies in the universe formed and how early galaxy formation is linked to dark matter assembly. The same data will also probe the temperature and cross section of dark matter in the massive Frontier Fields galaxy clusters, and tell us how the dark matter, cluster gas, and dynamics of the clusters influence the galaxies in and around them. These studies are possible because the Spitzer Space Telescope, Chandra X-ray Observatory, XMM-Newton, and ground based telescopes have already invested heavily in deep observations around the Frontier Fields, so that the addition of HST observations can yield significant new results.

  9. Remote vehicle survey tool

    International Nuclear Information System (INIS)

    Armstrong, G.A.; Burks, B.L.; Kress, R.L.; Wagner, D.G.; Ward, C.R.

    1993-01-01

    The Remote Vehicle Survey Tool (RVS7) is a color graphical display tool for viewing remotely acquired scientific data. The RVST displays the data in the form of a color two-dimensional world model map. The world model map allows movement of the remote vehicle to be tracked by the operator and the data from sensors to be graphically depicted in the interface. Linear and logarithmic meters, dual channel oscilloscopes, and directional compasses are used to display sensor information. The RVST is user-configurable by the use of ASCII text files. The operator can configure the RVST to work with any remote data acquisition system and teleoperated or autonomous vehicle. The modular design of the RVST and its ability to be quickly configured for varying system requirements make the RVST ideal for remote scientific data display in all environmental restoration and waste management programs

  10. The Cesarean Decision Survey

    Science.gov (United States)

    Puia, Denise M.

    2013-01-01

    A descriptive study design was used to describe the decision of women having a cesarean surgery. The Cesarean Birth Decision Survey was used to collect data from 101 postpartum women who underwent a cesarean. Most of the surgeries were to primipara women who reported doctor recommendation and increased safety for the baby as the main reasons for the cesarean. Those women who had repeat cesarean surgery all cited their previous cesarean as the main reason for the current surgery. Women’s knowledge of cesarean surgery needs to be assessed early in pregnancy so that appropriate education may be provided. Accurate and ongoing information may decrease the number of women choosing a cesarean surgery. PMID:24868134

  11. Using focal mechanism solutions to correlate earthquakes with faults in the Lake Tahoe-Truckee area, California and Nevada, and to help design LiDAR surveys for active-fault reconnaissance

    Science.gov (United States)

    Cronin, V. S.; Lindsay, R. D.

    2011-12-01

    trace of both the Polaris fault and the Dog Valley fault system are within composite swaths defined by overlapping seismo-lineaments. Composite seismo-lineaments indicate that multiple historic earthquakes might be associated with a fault. This apparently successful correlation of earthquakes with faults in an area where geologic mapping is good suggests another use for SLAM in areas where fault mapping is incomplete, inadequate or made particularly difficult because of vegetative cover. If no previously mapped fault exists along a composite swath generated using well constrained focal mechanism solutions, the swath might be used to guide the design of a LiDAR survey in support of reconnaissance for the causative fault. The acquisition and geomorphic analysis of LiDAR data along a compound seismo-lineament swath might reveal geomorphic evidence of a previously unrecognized fault trace that is worthy of additional field study.

  12. Prompting Designers to Design

    DEFF Research Database (Denmark)

    Ahmed, Saeema

    2006-01-01

    Recent research suggest that engineering designers need assistance to understand what information is relevant for their particular design problem. They require guidance in formulating their queries and also to understand what information is relevant for them. This paper presents an approach to pr...

  13. Principles of survey development for telemedicine applications.

    Science.gov (United States)

    Demiris, George

    2006-01-01

    Surveys can be used in the evaluation of telemedicine applications but they must be properly designed, consistent and accurate. The purpose of the survey and the resources available will determine the extent of testing that a survey instrument should undergo prior to its use. The validity of an instrument is the correspondence between what is being measured and what was intended to be measured. The reliability of an instrument describes the 'consistency' or 'repeatability' of the measurements made with it. Survey instruments should be designed and tested following basic principles of survey development. The actual survey administration also requires consideration, for example data collection and processing, as well as the interpretation of the findings. Surveys are of two different types. Either they are self-administered, or they are administered by interview. In the latter case, they may be administered by telephone or in a face-to-face meeting. It is important to design a survey instrument based on a detailed definition of what it intends to measure and to test it before administering it to the larger sample.

  14. The Danish Youth Survey 2002

    DEFF Research Database (Denmark)

    Helweg-Larsen, Karin; Sundaram, Vanita; Curtis, Tine

    2004-01-01

    OBJECTIVES: To explore ethical, legal and practical issues related to conducting a youth survey in Denmark on sexual experiences before the age of 15 and thereby achieve reliable data on child sexual abuse. STUDY DESIGN AND METHODS: The relevant authorities were consulted on possible legal...... of the accompanying offer of counselling. CONCLUSION: An anonymous youth survey based on computer-assisted self-interview (CASI) would increase the validity of youth surveys on child sexual abuse to which no ethical or legal objections were found....... obtaining parental consent. The Central Scientific Ethical Committee had no objections. In a number of fields, Danish legislation accords 15-to-18-year-olds the competence to make independent decisions regarding their personal circumstances, and the UN Convention of Children's Rights states that a child...

  15. Arduino based radiation survey meter

    International Nuclear Information System (INIS)

    Rahman, Nur Aira Abd; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee; Muzakkir, Amir

    2016-01-01

    This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr −1 ). Conversion factor (CF) value for conversion of CPM to μSvhr −1 determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr

  16. Arduino based radiation survey meter

    Energy Technology Data Exchange (ETDEWEB)

    Rahman, Nur Aira Abd, E-mail: nur-aira@nm.gov.my; Lombigit, Lojius; Abdullah, Nor Arymaswati; Azman, Azraf; Dolah, Taufik; Jaafar, Zainudin; Mohamad, Glam Hadzir Patai; Ramli, Abd Aziz Mhd; Zain, Rasif Mohd; Said, Fazila; Khalid, Mohd Ashhar; Taat, Muhamad Zahidee [Malaysian Nuclear Agency, 43000, Bangi, Selangor (Malaysia); Muzakkir, Amir [Sinaran Utama Teknologi Sdn Bhd, 43650, Bandar Baru Bangi, Selangor (Malaysia)

    2016-01-22

    This paper presents the design of new digital radiation survey meter with LND7121 Geiger Muller tube detector and Atmega328P microcontroller. Development of the survey meter prototype is carried out on Arduino Uno platform. 16-bit Timer1 on the microcontroller is utilized as external pulse counter to produce count per second or CPS measurement. Conversion from CPS to dose rate technique is also performed by Arduino to display results in micro Sievert per hour (μSvhr{sup −1}). Conversion factor (CF) value for conversion of CPM to μSvhr{sup −1} determined from manufacturer data sheet is compared with CF obtained from calibration procedure. The survey meter measurement results are found to be linear for dose rates below 3500 µSv/hr.

  17. Participatory Design with Dyslectics

    DEFF Research Database (Denmark)

    Vangeli, Panagiota; Stage, Jan

    2017-01-01

    Participatory Design has been used successfully in many projects but the question is how participatory design works with people with a cognitive disorder like dyslexia. In this study, we analyzed observations of participatory design sessions with dyslectic participants for developing designs...... of a reading software application by applying two participatory design methods: the IDEAS and CI methods. Furthermore, we conducted online surveys to gather information on dyslectics participants’ and their special-education teachers’ opinion regarding the participatory design process, methods and final...... designs. The results indicate that participatory design works effectively with dyslectic people provided the participation of Proxy Users to represent dyslectics, when it is necessary, the participation of an experienced on dyslexia facilitator who has the knowledge to address incidents caused due...

  18. Using electronic surveys in nursing research.

    Science.gov (United States)

    Cope, Diane G

    2014-11-01

    Computer and Internet use in businesses and homes in the United States has dramatically increased since the early 1980s. In 2011, 76% of households reported having a computer, compared with only 8% in 1984 (File, 2013). A similar increase in Internet use has also been seen, with 72% of households reporting access of the Internet in 2011 compared with 18% in 1997 (File, 2013). This emerging trend in technology has prompted use of electronic surveys in the research community as an alternative to previous telephone and postal surveys. Electronic surveys can offer an efficient, cost-effective method for data collection; however, challenges exist. An awareness of the issues and strategies to optimize data collection using web-based surveys is critical when designing research studies. This column will discuss the different types and advantages and disadvantages of using electronic surveys in nursing research, as well as methods to optimize the quality and quantity of survey responses.

  19. Big Surveys, Big Data Centres

    Science.gov (United States)

    Schade, D.

    2016-06-01

    Well-designed astronomical surveys are powerful and have consistently been keystones of scientific progress. The Byurakan Surveys using a Schmidt telescope with an objective prism produced a list of about 3000 UV-excess Markarian galaxies but these objects have stimulated an enormous amount of further study and appear in over 16,000 publications. The CFHT Legacy Surveys used a wide-field imager to cover thousands of square degrees and those surveys are mentioned in over 1100 publications since 2002. Both ground and space-based astronomy have been increasing their investments in survey work. Survey instrumentation strives toward fair samples and large sky coverage and therefore strives to produce massive datasets. Thus we are faced with the "big data" problem in astronomy. Survey datasets require specialized approaches to data management. Big data places additional challenging requirements for data management. If the term "big data" is defined as data collections that are too large to move then there are profound implications for the infrastructure that supports big data science. The current model of data centres is obsolete. In the era of big data the central problem is how to create architectures that effectively manage the relationship between data collections, networks, processing capabilities, and software, given the science requirements of the projects that need to be executed. A stand alone data silo cannot support big data science. I'll describe the current efforts of the Canadian community to deal with this situation and our successes and failures. I'll talk about how we are planning in the next decade to try to create a workable and adaptable solution to support big data science.

  20. K West Basin canister survey

    International Nuclear Information System (INIS)

    Pitner, A.L.

    1998-01-01

    A survey was conducted of the K West Basin to determine the distribution of canister types that contain the irradiated N Reactor fuel. An underwater camera was used to conduct the survey during June 1998, and the results were recorded on videotape. A full row-by-row survey of the entire basin was performed, with the distinction between aluminum and stainless steel Mark 1 canisters made by the presence or absence of steel rings on the canister trunions (aluminum canisters have the steel rings). The results of the survey are presented in tables and figures. Grid maps of the three bays show the canister lid ID number and the canister type in each location that contained fuel. The following abbreviations are used in the grid maps for canister type designation: IA = Mark 1 aluminum, IS = Mark 1 stainless steel, and 2 = Mark 2 stainless steel. An overall summary of the canister distribution survey is presented in Table 1. The total number of canisters found to contain fuel was 3842, with 20% being Mark 1 Al, 25% being Mark 1 SS, and 55% being Mark 2 SS. The aluminum canisters were predominantly located in the East and West bays of the basin

  1. Survey of thermal insulation systems

    International Nuclear Information System (INIS)

    Kinoshita, Izumi

    1983-01-01

    Better thermal insulations have been developed to meet the growing demands of industry, and studies on thermal insulation at both high temperature and low temperature have been widely performed. The purpose of this survey is to summarize data on the performances and characteristics of thermal insulation materials and thermal insulation structures (for instance, gas cooled reactors, space vehicles and LNG storage tanks), and to discuss ravious problems regarding the design of thermal insulation structures of pool-type LMFBRs. (author)

  2. Winged design; Befluegeltes Design

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Tilman

    2013-10-15

    Today the wind rotor blades are about 80 meter long. To keep them light and transportable designers and material scientists come up with a number of ideas. Will the carbon fiber prevail against the glass fiber? [German] Ueber 80 Meter messen die laengsten Rotorblaetter heute. Um sie leicht und transportfaehig zu halten, lassen sich Designer und Materialforscher einiges einfallen. Wird sich die Kohlefaser gegen die Glasfaser durchsetzen?.

  3. The environmental survey manual

    International Nuclear Information System (INIS)

    1987-08-01

    The purpose of this manual is to provide guidance to the Survey and Sampling and Analysis teams that conduct the one-time Environmental Survey of the major US Department of Energy (DOE) operating facilities. This manual includes a discussion of DOE's policy on environmental issues, a review of statutory guidance as it applies to the Survey, the procedures and protocols to be used by the Survey teams, criteria for the use of the Survey teams in evaluating existing environmental data for the Survey effort, generic technical checklists used in every Survey, health and safety guidelines for the personnel conducting the Survey, including the identification of potential hazards, prescribed protective equipment, and emergency procedures, the required formats for the Survey reports, guidance on identifying environmental problems that need immediate attention by the Operations Office responsible for the particular facility, and procedures and protocols for the conduct of sampling and analysis

  4. Dansk Design

    DEFF Research Database (Denmark)

    Dickson, Thomas

    Indhold: Hvad er design?; Hvor kommer dansk design fra?; Produktdesign; Tekstil- og tøjdesign; Design af møbler og boligindretning; Bygningen og design; Arbejdets design; Transportdesign; Offentligt design; Grafisk design; Nye tider og en ny slags design...

  5. Aerial radiation surveys

    International Nuclear Information System (INIS)

    Jobst, J.

    1980-01-01

    A recent aerial radiation survey of the surroundings of the Vitro mill in Salt Lake City shows that uranium mill tailings have been removed to many locations outside their original boundary. To date, 52 remote sites have been discovered within a 100 square kilometer aerial survey perimeter surrounding the mill; 9 of these were discovered with the recent aerial survey map. Five additional sites, also discovered by aerial survey, contained uranium ore, milling equipment, or radioactive slag. Because of the success of this survey, plans are being made to extend the aerial survey program to other parts of the Salt Lake valley where diversions of Vitro tailings are also known to exist

  6. Practical guidelines for developing a smartphone-based survey instrument

    DEFF Research Database (Denmark)

    Ohme, Jakob; de Vreese, Claes Holger; Albæk, Erik

    The increasing relevance of mobile surveys makes it important to gather empirical evidence on designs of such surveys. This research note presents the results of a test study conducted to identify the best set-up for a smartphone-based survey. We base our analysis on a random sample of Danish...

  7. Motivation in Business Survey Response Behavior : Influencing motivation to improve survey outcome

    NARCIS (Netherlands)

    Torres van Grinsven, V.|info:eu-repo/dai/nl/355608510

    2015-01-01

    In this dissertation we show theoretical and empirical insights into the concept of motivation in the context of the business and organizational survey task. The research has led to a number of recommendations on how to improve organizational survey and communication design to enhance motivation and

  8. Rapid surveys for program evaluation: design and implementation of an experiment in Ecuador Encuestas rápidas para la evaluación de programas: diseño y aplicación de un experimento en el Ecuador

    Directory of Open Access Journals (Sweden)

    Kate Macintyre

    1999-09-01

    Full Text Available This paper presents details from the field test of two rapid surveys in Ecuador in 1995. It focuses on how the surveys were designed and implemented, including descriptions of the sampling procedures, the preparation and use of preprogrammed palmtop computers for data entry, the selection criteria for the interviewing team, and how the training was designed. Lessons are drawn that will assist health professionals plan and carry out better rapid data collection in the future. The objective of the study was to evaluate the reliability and validity of data gathered during the rapid surveys as compared with a recent "gold standard" national survey. A two-way factorial design was used to control for differences in sampling (probability versus quasi-probability and methods of data collection (paper versus palmtop computer. Few differences were detected between the surveys done on palmtops as compared to paper ones, but urban and rural differentials in contraceptive use were less pronounced in the rapid surveys than in the earlier, national survey. This suggests that caution should be exercised in interpreting the disaggregated data in these rapid surveys. In-depth interviews revealed two features of the rapid surveys that were especially popular: the palmtops for their speed of data entry, and the short questionnaire for its "low impact" on a respondent's time. The common belief that computers would disturb respondents was not found to be the case. Even with no computer experience, the interviewers rapidly mastered the new technology.Este trabajo detalla algunos aspectos de la prueba en el terreno de dos encuestas rápidas efectuadas en el Ecuador en 1995. Examina el diseño y la aplicación de las encuestas; la preparación y el uso de computadoras de bolsillo preprogramadas para la inclusión de los datos; los criterios de selección del equipo de entrevistadores, y el diseño del adiestramiento. Se extraen lecciones que ayudarán a los

  9. SURVEY, BUFFALO COUNTY, NE

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  10. Patient survey (HCAHPS) - National

    Data.gov (United States)

    U.S. Department of Health & Human Services — The national average for the HCAHPS survey categories. HCAHPS is a national, standardized survey of hospital patients about their experiences during a recent...

  11. Survey, OCONEE COUNTY, SC

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  12. SURVEY, DOUGLAS COUNTY, MN

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  13. GDOT employee survey.

    Science.gov (United States)

    2017-07-04

    The research team worked in collaboration with GDOT to conduct the 2016 GDOT Employee Survey. This research study aimed to increase the response rate and the usefulness of the feedback from the GDOT employee survey to support organizational decisions...

  14. SURVEY, KENAI PENINSULSA, AK

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  15. SURVEY, BROADWATER COUNTY, MT

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  16. SURVEY, OSCEOLA COUNTY, FLORIDA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  17. SURVEY, POTTAWATTAMIE COUNTY, IA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  18. Large Pelagics Intercept Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Large Pelagics Intercept Survey (LPIS) is a dockside survey of private and charterboat captains who have just completed fishing trips directed at large pelagic...

  19. MAX and Survey Linkages

    Data.gov (United States)

    U.S. Department of Health & Human Services — CMS is interested in linking MAX files with survey data, including four surveys conducted by the National Center for Health Statistics (NCHS) - the National Health...

  20. SURVEY, LAKE COUNTY, MT

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  1. NGS Survey Control Map

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The NGS Survey Control Map provides a map of the US which allows you to find and display geodetic survey control points stored in the database of the National...

  2. SURVEY, Lowndes County, MS

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  3. SURVEY, REFUGIO COUNTY, TEXAS

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  4. SURVEY, FAIRFIELD COUNTY, CT

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  5. Sea Scallop Survey

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The standardized NEFSC Sea Scallop Survey began in 1980 and has covered an area from Cape Hatteras to Georges Bank. The survey aims to determine the distribution and...

  6. SURVEY, MISSOULA COUNTY, MT

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  7. SURVEY, Northumberland County, VA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — The field survey data for this coastal study includes a field report that exhibits photos and transect information collected in the field survey phase of the study....

  8. SURVEY, BARNSTABLE COUNTY, MA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  9. SURVEY, CASCADE COUNTY, MT

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  10. SURVEY, NATCHITOCHES PARISH, USA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  11. SURVEY, HOLMES COUNTY, MS

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  12. Iowa Intensive Archaeological Survey

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This shape file contains intensive level archaeological survey areas for the state of Iowa. All intensive Phase I surveys that are submitted to the State Historic...

  13. SURVEY, MONO COUNTY, CALIFORNIA

    Data.gov (United States)

    Federal Emergency Management Agency, Department of Homeland Security — Survey data includes spatial datasets and data tables necessary to digitally represent data collected in the survey phase of the study. (Source: FEMA Guidelines and...

  14. Primer on Health Surveys

    OpenAIRE

    David L Nordstrom; David L Nordstrom

    2012-01-01

    The aim of this paper is to introduce novice researchers to surveys as a method of data collection. It starts with the definition of a survey, its major purposes and types as well as changes in the goals surveys have helped to achieve over time. Advantages and disadvantages of surveys over population censuses and medical examinations are discussed. Approaches to questionnaire construction are introduced along with properties that questionnaires are evaluated for. Modes of administration, sam...

  15. Surveying ethnic minorities

    NARCIS (Netherlands)

    Joost Kappelhof

    2015-01-01

    Obtaining accurate survey data on ethnic minorities is not easy. Ethnic minorities are usually underrepresented in surveys, and it is moreover not certain that those who do take part in surveys are representative of the group the researcher is interested in. For example, is it only people with

  16. GIS Readiness Survey 2014

    DEFF Research Database (Denmark)

    Schrøder, Lise; Hvingel, Line Træholt; Hansen, Henning Sten

    2014-01-01

    The GIS Readiness Survey 2014 is a follow-up to the corresponding survey that was carried out among public institutions in Denmark in 2009. The present survey thus provides an updated image of status and challenges in relation to the use of spatial information, the construction of the com- mon...

  17. Conducting online surveys

    NARCIS (Netherlands)

    Selm, M. van; Jankowski, N.W.

    2006-01-01

    The World Wide Web (WWW) is increasingly being used as a tool and platform for survey research. Two types of electronic or online surveys available for data collection are the email and Web based survey, and they constitute the focus of this paper. We address a multitude of issues researchers should

  18. A Subaru galaxy redshift survey: WFMOS survey

    International Nuclear Information System (INIS)

    Takada, M

    2008-01-01

    A planned galaxy redshift survey with the Subaru 8.2m telescope, the WFMOS survey, offers a unique opportunity for probing detailed properties of large-scale structure formation in the expanding universe by measuring clustering strength of galaxy distribution as a function of distance scale and redshift. In particular, the precise measurement of the galaxy power spectrum, combined with the cosmic microwave background experiments, allows us to obtain stringent constraints on or even determine absolute mass scales of the Big-Bang relic neutrinos as the neutrinos imprint characteristic scale- and redshift-dependent modifications onto the galaxy power spectrum shape. Here we describe the basic concept of how the galaxy clustering measurement can be used to explore the neutrino masses, with particular emphasis on advantages of the WFMOS survey over the existing low-redshift surveys such as SDSS

  19. Environmental Survey preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  20. Primer on Health Surveys

    Directory of Open Access Journals (Sweden)

    David L Nordstrom

    2012-06-01

    Full Text Available The aim of this paper is to introduce novice researchers to surveys as a method of data collection. It starts with the definition of a survey, its major purposes and types as well as changes in the goals surveys have helped to achieve over time. Advantages and disadvantages of surveys over population censuses and medical examinations are discussed. Approaches to questionnaire construction are introduced along with properties that questionnaires are evaluated for. Modes of administration, sample size issues, and data analysis approaches are also introduced. The primer is illustrated with examples of surveys conducted in different countries with various public health purposes.

  1. Research Methods in Healthcare Epidemiology: Survey and Qualitative Research.

    Science.gov (United States)

    Safdar, Nasia; Abbo, Lilian M; Knobloch, Mary Jo; Seo, Susan K

    2016-11-01

    Surveys are one of the most frequently employed study designs in healthcare epidemiology research. Generally easier to undertake and less costly than many other study designs, surveys can be invaluable to gain insights into opinions and practices in large samples and may be descriptive and/or be used to test associations. In this context, qualitative research methods may complement this study design either at the survey development phase and/or at the interpretation/extension of results stage. This methods article focuses on key considerations for designing and deploying surveys in healthcare epidemiology and antibiotic stewardship, including identification of whether or not de novo survey development is necessary, ways to optimally lay out and display a survey, denominator measurement, discussion of biases to keep in mind particularly in research using surveys, and the role of qualitative research methods to complement surveys. We review examples of surveys in healthcare epidemiology and antimicrobial stewardship and review the pros and cons of methods used. A checklist is provided to help aid design and deployment of surveys in healthcare epidemiology and antimicrobial stewardship. Infect Control Hosp Epidemiol 2016;1-6.

  2. Developing the online survey.

    Science.gov (United States)

    Gordon, Jeffry S; McNew, Ryan

    2008-12-01

    Institutions of higher education are now using Internet-based technology tools to conduct surveys for data collection. Research shows that the type and quality of responses one receives with online surveys are comparable with what one receives in paper-based surveys. Data collection can take place on Web-based surveys, e-mail-based surveys, and personal digital assistants/Smartphone devices. Web surveys can be subscription templates, software packages installed on one's own server, or created from scratch using Web programming development tools. All of these approaches have their advantages and disadvantages. The survey owner must make informed decisions as to the right technology to implement. The correct choice can save hours of work in sorting, organizing, and analyzing data.

  3. The Policy Design Effect

    DEFF Research Database (Denmark)

    Hedegaard, Troels Fage

    2014-01-01

    attitudes have argued that this ‘policy design effect’ can be explained by a combination of self-interest patterns, public perceptions of the recipient group and whether eligibility under the policy is perceived as fair or arbitrary.The explanations, however, lack micro-level theory and testing as to why...... the design of a policy affects individual and public support. This article seeks to explain this policy design effect by theoretically outlining and testing how being proximate to recipients of a social benefit affects attitudes towards the benefit. A survey of attitudes towards spending on five social...

  4. Quantum control theory and applications: A survey

    OpenAIRE

    Dong, Daoyi; Petersen, Ian R

    2009-01-01

    This paper presents a survey on quantum control theory and applications from a control systems perspective. Some of the basic concepts and main developments (including open-loop control and closed-loop control) in quantum control theory are reviewed. In the area of open-loop quantum control, the paper surveys the notion of controllability for quantum systems and presents several control design strategies including optimal control, Lyapunov-based methodologies, variable structure control and q...

  5. Complex surveys analysis of categorical data

    CERN Document Server

    Mukhopadhyay, Parimal

    2016-01-01

    The primary objective of this book is to study some of the research topics in the area of analysis of complex surveys which have not been covered in any book yet. It discusses the analysis of categorical data using three models: a full model, a log-linear model and a logistic regression model. It is a valuable resource for survey statisticians and practitioners in the field of sociology, biology, economics, psychology and other areas who have to use these procedures in their day-to-day work. It is also useful for courses on sampling and complex surveys at the upper-undergraduate and graduate levels. The importance of sample surveys today cannot be overstated. From voters’ behaviour to fields such as industry, agriculture, economics, sociology, psychology, investigators generally resort to survey sampling to obtain an assessment of the behaviour of the population they are interested in. Many large-scale sample surveys collect data using complex survey designs like multistage stratified cluster designs. The o...

  6. The Solomon Islands Tsunami of 6 February 2013 in the Santa Cruz Islands: Field Survey and Modeling

    Science.gov (United States)

    Fritz, Hermann M.; Papantoniou, Antonios; Biukoto, Litea; Albert, Gilly; Wei, Yong

    2014-05-01

    On February 6, 2013 at 01:12:27 UTC (local time: UTC+11), a magnitude Mw 8.0 earthquake occurred 70 km to the west of Ndendo Island (Santa Cruz Island) in the Solomon Islands. The under-thrusting earthquake near a 90° bend, where the Australian plate subducts beneath the Pacific plate generated a locally focused tsunami in the Coral Sea and the South Pacific Ocean. The tsunami claimed the lives of 10 people and injured 15, destroyed 588 houses and partially damaged 478 houses, affecting 4,509 people in 1,066 households corresponding to an estimated 37% of the population of Santa Cruz Island. A multi-disciplinary international tsunami survey team (ITST) was deployed within days of the event to document flow depths, runup heights, inundation distances, sediment and coral boulder depositions, land level changes, damage patterns at various scales, performance of the man-made infrastructure and impact on the natural environment. The 19 to 23 February 2013 ITST covered 30 locations on 4 Islands: Ndendo (Santa Cruz), Tomotu Noi (Lord Howe), Nea Tomotu (Trevanion, Malo) and Tinakula. The reconnaissance completely circling Ndendo and Tinakula logged 240 km by small boat and additionally covered 20 km of Ndendo's hard hit western coastline by vehicle. The collected survey data includes more than 80 tsunami runup and flow depth measurements. The tsunami impact peaked at Manoputi on Ndendo's densely populated west coast with maximum tsunami height exceeding 11 m and local flow depths above ground exceeding 7 m. A fast tide-like positive amplitude of 1 m was recorded at Lata wharf inside Graciosa Bay on Ndendo Island and misleadingly reported in the media as representative tsunami height. The stark contrast between the field observations on exposed coastlines and the Lata tide gauge recording highlights the importance of rapid tsunami reconnaissance surveys. Inundation distance and damage more than 500 m inland were recorded at Lata airport on Ndendo Island. Landslides were

  7. VLSI design

    CERN Document Server

    Chandrasetty, Vikram Arkalgud

    2011-01-01

    This book provides insight into the practical design of VLSI circuits. It is aimed at novice VLSI designers and other enthusiasts who would like to understand VLSI design flows. Coverage includes key concepts in CMOS digital design, design of DSP and communication blocks on FPGAs, ASIC front end and physical design, and analog and mixed signal design. The approach is designed to focus on practical implementation of key elements of the VLSI design process, in order to make the topic accessible to novices. The design concepts are demonstrated using software from Mathworks, Xilinx, Mentor Graphic

  8. Utility FGD Survey, January--December 1989

    Energy Technology Data Exchange (ETDEWEB)

    Hance, S.L.; McKibben, R.S.; Jones, F.M. (IT Corp., Cincinnati, OH (United States))

    1992-03-01

    The Utility flue gas desulfurization (FGD) Survey report, which is generated by a computerized data base management system, represents a survey of operational and planned domestic utility flue gas desulfurization (FGD) systems. It summarizes information contributed by the utility industry, system and equipment suppliers, system designers, research organizations, and regulatory agencies. The data cover system design, fuel characteristics, operating history, and actual system performance. Also included is a unit-by-unit discussion of problems and solutions associated with the boilers, scrubbers, and FGD systems. The development status (operational, under construction, or in the planning stages), system supplier, process, waste disposal practice, and regulatory class are tabulated alphabetically by utility company.

  9. Energy Consumption Management in Design

    NARCIS (Netherlands)

    Smit, Jaap

    1997-01-01

    A survey of the basic issues in low power design is presented, including techniques for the analysis of energy consumption in the early design phase of analog and digital circuits. The concept of energy complexity will be introduced in conjunction with techniques for parameterized energy management.

  10. Aerial radiation survey

    International Nuclear Information System (INIS)

    Pradeep Kumar, K.S.

    1998-01-01

    Aerial gamma spectrometry surveys are the most effective, comprehensive and preferred tool to delimit the large area surface contamination in a radiological emergency either due to a nuclear accident or following a nuclear strike. The airborne survey apart from providing rapid and economical evaluation of ground contamination over large areas due to larger ground clearance and higher speed, is the only technique to overcome difficulties posed by ground surveys of inaccessible region. The aerial survey technique can also be used for searching of lost radioactive sources, tracking of radioactive plume and generation of background data on the Emergency Planning Zone (EPZ) of nuclear installations

  11. Survey of photovoltaic systems

    Energy Technology Data Exchange (ETDEWEB)

    1979-08-01

    In developing this survey of photovoltaic systems, the University of Alabama in Huntsville assembled a task team to perform an extensive telephone survey of all known photovoltaic manufacturers. Three US companies accounted for 77% of the total domestic sales in 1978. They are Solarex Corporation, Solar Power Croporation, and ARCO Solar, Inc. This survey of solar photovoltaic (P/V) manufacturers and suppliers consists of three parts: a catalog of suppliers arranged alphabetically, data sheets on specific products, and typical operating, installation, or maintenance instructions and procedures. This report does not recommend or endorse any company product or information presented within as the results of this survey.

  12. Management Satisfaction Survey

    Data.gov (United States)

    Office of Personnel Management — The Chief Human Capital Officers' Managers' Satisfaction Survey asks managers to rate their perception of workforce planning, interaction with and levels of support...

  13. Listening to firms : how to use firm-level surveys to assess constraints on private sector development

    OpenAIRE

    Stone, Andrew H.W.

    1992-01-01

    Firm-level surveys elicit information important to formulating sound policy advice and designing projects to promote private sector development. Drawing on recent World Bank experience in eight countries, the author advises why and how to implement targeted field surveys by answering the following questions: Why use targeted field surveys? How should surveys be focused and designed? What types of questions work best in surveys? How can surveys be oriented toward their target population? How s...

  14. A Survey of the Innovation Surveys

    NARCIS (Netherlands)

    Hong, Shangqin; Oxley, Les; McCann, Philip

    Both theoretical and conceptual understanding of innovation has developed significantly since the early 1980s. More noticeable, however, are the major changes that have been experienced in empirically-oriented innovation research as a result of the introduction of firm level innovation surveys.

  15. Design of parametric software tools

    DEFF Research Database (Denmark)

    Sabra, Jakob Borrits; Mullins, Michael

    2011-01-01

    The studies investigate the field of evidence-based design used in architectural design practice and propose a method using 2D/3D CAD applications to: 1) enhance integration of evidence-based design knowledge in architectural design phases with a focus on lighting and interior design and 2) assess...... fulfilment of evidence-based design criterion regarding light distribution and location in relation to patient safety in architectural health care design proposals. The study uses 2D/3D CAD modelling software Rhinoceros 3D with plug-in Grasshopper to create parametric tool prototypes to exemplify...... the operations and functions of the design method. To evaluate the prototype potentials, surveys with architectural and healthcare design companies are conducted. Evaluation is done by the administration of questionnaires being part of the development of the tools. The results show that architects, designers...

  16. Design Anthropology in Participatory Design

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Kjærsgaard, Mette Gislev

    2015-01-01

    This focus section explores the opportunities of design anthropology in participatory design as an approach to research and design in an increasingly global and digital world. Traditionally, ethnography has been used in Participatory design to research real-life contexts and challenges, and as ways...... opportunities of using design anthropology as a holistic and critical approach to addressing societal challenges and change, and a way for anthropologists and designers to engage in participatory research and design that extend beyond the empirical....

  17. Is it possible to estimate the minimal clinically important treatment effect needed to change practice in preterm birth prevention? Results of an obstetrician survey used to support the design of a trial

    Directory of Open Access Journals (Sweden)

    Ross Sue

    2012-03-01

    Full Text Available Abstract Background Sample sizes for obstetrical trials are often based on the opinion of investigators about clinically important effect size. We surveyed Canadian obstetricians to investigate clinically important effect sizes required before introducing new treatments into practice to prevent preterm birth. Methods Questionnaires were mailed to practicing obstetricians, asking the magnitude of pregnancy prolongation required to introduce treatments into practice. The three prophylactic treatments were of increasing invasiveness: vaginal progesterone, intramuscular progesterone, and cervical cerclage. We also asked about the perceived most relevant outcome measures for obstetrical trials and current obstetrical practice in preterm birth prevention. Results 544/1293(42.1% completed questionnaires were received. The majority of respondents required one or two weeks' increase in length of gestation before introducing vaginal (372,77.1%, and intramuscular progesterone(354,67.9%. At least three weeks increase was required before introducing prophylactic cervical cerclage(326,62.8%. Clinicians who already used a treatment required a smaller difference before introducing it into practice. Decreasing neonatal morbidity was cited as the most important outcome for obstetrical trials (349,72.2%. Conclusion Obstetricians would require a larger increase in treatment effect before introducing more invasive treatments into practice. Although infant morbidity was perceived as a more important outcome, clinicians appeared willing to change practice on the basis of prolongation of pregnancy, a surrogate outcome. We found that there is not a single minimum clinically important treatment effect that will influence all practising clinicians: rather the effect size that will influence physicians is affected by the nature of the treatment, the reported outcome measure and the clinician's own current clinical practice.

  18. American Housing Survey (AHS)

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  19. Our Surveys & Programs

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  20. Marine gamma spectrometric survey

    International Nuclear Information System (INIS)

    Kostoglodov, V.V.

    1979-01-01

    Presented are theoretical problems physical and geochemical prerequisites and possibilities of practical application of the method of continuous submarine gamma-spectrometric survey and radiometric survey destined for rapid study of the surface layer of marine sediments. Shown is high efficiency and advantages of this method in comparison with traditional and widely spread in marine geology methods of bottom sediments investigation