WorldWideScience

Sample records for vegetatively propagated staple

  1. Vegetative propagation of Bambusa vulgaris

    Directory of Open Access Journals (Sweden)

    Rafael Malfitano Braga

    2017-06-01

    Full Text Available Bamboo is an important source of raw material of multiple uses. The development of simple techniques for its propagation is a practical way to enable its implementation in ownership of low technology. The present work had the objective of evaluating artisanal propagation methods for Bambusa vulgaris. Two types of propagules were tested, with buds budded or not, and three relative positions to the removal of vegetative material on the culm. The best propagule was with only one node, extracted from the lower thirds of the stem, presenting 72% of rooting. This result demonstrates its potential for seedling production of this species under low tech.

  2. VEGETATIVE PROPAGATION OF Adansonia digitata (L.) USING ...

    African Journals Online (AJOL)

    Ridwan

    Cuttings dipped in Indole-3-butylic Acid (with a concentration of 150mg/L) planted in sawdust media (SD/IBA/150mg/L) had the best result of all the variables assessed and therefore recommended for vegetative propagation of A. digitata. Key word: Vegetative propagation, Growth hormone, Rooting media. INTRODUCTION.

  3. Mechanisms of vegetative propagation in bulbs

    NARCIS (Netherlands)

    Moreno-Pachón, Natalia

    2017-01-01

    Vegetative propagation is very important for the survival of species with long juvenile and adult vegetative phases, as it is the case for bulbous plants. Bulbous plants are ornamental geophytes with a bulb as an underground storage organ. Among flower bulbs, tulip and lily are the two commercially

  4. Cryopreservation techniques and their application in vegetatively propagated crop plants in Finland

    OpenAIRE

    A. NUKARI; M. UOSUKAINEN; V-M. ROKKA

    2008-01-01

    Cryopreservation protocols have been introduced as techniques for germplasm preservation of vegetatively propagated horticultural and staple food crops. In Finland, cryopreservation has been studied since 1990s, beginning with cryopreservation of forest tree breeding material and since 2004 on cryopreservation of genetic resources of horticultural plants and potato. Priority was given to cryopreservation of raspberry (Rubus ideaus L.), strawberry (Fragaria x ananassa Duch.) and potato (Solanu...

  5. The vegetative method of propagating Adenia cissampeloides ...

    African Journals Online (AJOL)

    Vegetative method of propagation was used for the experiments: cuttings from vines in an active growth phase and those from aged vines were made from the mother plant. The former cuttings were classified according to the thickness of the vines as 1 cm and 2 cm thick vines and the latter cuttings were 3 cm thick.

  6. Microwave Propagation Through Cultural Vegetation Canopies

    Science.gov (United States)

    Tavakoli, Ahad

    The need to understand the interaction of microwaves with vegetation canopies has markedly increased in recent years. This is due to advances made in remote sensing science, microwave technology, and signal processing circuits. One class of the earth's vegetation cover is man-made canopies, such as agricultural fields, orchards, and artificial forests. Contrary to natural vegetation terrain, location, spacing, and density of plants in a man-made vegetation canopy are deterministic quantities. As a result, the semi-deterministic nature of cultural vegetation canopies violate the random assumption of the radiative transfer theory and leads to experimented results that are in variance with model calculations. Hence, an alternative approach is needed to model the interaction of microwaves with such canopies. This thesis examines the propagation behavior through a canopy of corn plants. The corn canopy was selected as a representative of cultural vegetation canopies that are planted in parallel rows with an approximately fixed spacing between adjacent plants. Several experimental measurements were conducted to determine the transmission properties of a corn canopy in the 1-10 GHz range. The measurements which included horizontal propagation through the canopy as well as propagation at oblique incidence, were performed for defoliated canopies and for canopies with leaves. Through experimental observations and model development, the propagation behavior was found to be strongly dependent on the wavelength and the path length. At a wavelength in the neighborhood of 20 cm, for example, it was found that scattering by the stalks was coherent in nature for waves propagating horizontally through the canopy, which necessitated the development of a coherent-field model that uses Bragg scattering to account for the observed interference pattern in the transmitted beam. As the wavelength is made shorter, the semi-random spacing between plants becomes significant relative to the

  7. Vegetative propagation of Adansonia digitata (L.) using juvenile ...

    African Journals Online (AJOL)

    ... for the variables assessed. Cuttings dipped in Indole-3-butylic Acid (with a concentration of 150mg/L) planted in sawdust media (SD/IBA/150mg/L) had the best result of all the variables assessed and therefore recommended for vegetative propagation of A. digitata. Key word: Vegetative propagation, Growth hormone, ...

  8. Vegetative propagation of Chrysophyllum albidum G. Don by leafy ...

    African Journals Online (AJOL)

    Since the provision of clonally propagated superior genotypes of this species would be beneficial to farmers, investigations were conducted to optimize its vegetative propagation. In the study, the first experiment examining the effect of leaf area on propagation success involved cuttings with leaf areas of 0 (leafless), 20, 40, ...

  9. 24 GHz cmWave Radio Propagation Through Vegetation

    DEFF Research Database (Denmark)

    Rodriguez, Ignacio; Abreu, Renato Barbosa; Portela Lopes de Almeida, Erika

    2016-01-01

    This paper presents a measurement-based analysis of cm-wave radio propagation through vegetation at 24 GHz. A set of dedicated directional measurements were performed with horn antennas located close to street level inside a densely-vegetated area illuminated from above. The full azimuth...... along the paper are useful for simulation and radio network planning of future wireless systems operating at 24 GHz in presence of vegetation....

  10. Cryopreservation techniques and their application in vegetatively propagated crop plants in Finland

    Directory of Open Access Journals (Sweden)

    A. NUKARI

    2008-12-01

    Full Text Available Cryopreservation protocols have been introduced as techniques for germplasm preservation of vegetatively propagated horticultural and staple food crops. In Finland, cryopreservation has been studied since 1990’s, beginning with cryopreservation of forest tree breeding material and since 2004 on cryopreservation of genetic resources of horticultural plants and potato. Priority was given to cryopreservation of raspberry (Rubus ideaus L., strawberry (Fragaria x ananassa Duch. and potato (Solanum tuberosum L. and the possibility to use cryotherapy in eradication of raspberry bushy dwarf virus (RBDV from in vitro cultures were studied on raspberry. Modified droplet vitrification cryopreservation protocols were designed for raspberry and strawberry and cryotherapy combined with thermotherapy was proven to be a successful application to eliminate RBDV from infected raspberries. Cryotherapy method can be applied for a large scale elimination of viruses from plant germplasm and from candidate nuclear stock in a certified plant production scheme. Routine use of cryotechniques in germplasm preservation of vegetatively propagated horticultural plants was started. Besides for long term germplasm preservation, cryopreservation techniques can be applied also for maintenance of mother stocks in certified plant production schemes and in commercial plant production. Cryopreservation of potato shoot tips needs additional detailed research to obtain sufficient recovery and regrowth rates.;

  11. Radio wave propagation through vegetation: Factors influencing signal attenuation

    Science.gov (United States)

    Savage, Nick; Ndzi, David; Seville, Andrew; Vilar, Enric; Austin, John

    2003-10-01

    The paper describes an extensive wideband channel sounding measurement campaign to investigate signal propagation through vegetation. The measurements have been conducted at three frequencies (1.3, 2 and 11.6 GHz) at sites with different measurement geometries and tree species. The data have been used to evaluate current narrowband empirical vegetation attenuation models and study the prevailing propagation mechanisms. Evaluation of the modified exponential decay (MED), maximum attenuation (MA) and nonzero gradient (NZG) models show that on a site by site basis, the NZG model gives the best prediction of excess attenuation due to vegetation. The MA model has been found to be the worst of the three models. The studies have shown that the measurement site used to obtain the NZG model parameter values given in () [2001] is influenced by metal lampposts and passing traffic, and thus was based on corrupted data. The results show that the leaf state, measurement geometry and vegetation density are more important factors influencing signal attenuation than tree species or leaf shape. Generally, the 11.6 GHz signal was attenuated much more than the 1.3 and 2 GHz signals by vegetation in-leaf, but the differences in attenuation were not significant in the out-of-leaf state. A successful excess attenuation model due to vegetation must consider the measurement geometry and vegetation descriptive parameters as well as any contributions from ground reflection and/or diffraction over the top or round edges of the trees.

  12. Pathogen Propagation Model with Superinfection in Vegetatively Propagated Plants on Lattice Space.

    Directory of Open Access Journals (Sweden)

    Yuma Sakai

    Full Text Available Many clonal plants have two reproductive patterns, seed propagation and vegetative propagation. By vegetative propagation, plants reproduce the genetically identical offspring with a low mortality, because resources are supplied from the other individuals through interconnected ramets at vegetative-propagated offspring. However, the ramets transport not only resources but also systemic pathogen. Pathogens evolve to establish and spread widely within the plant population. The superinfection, which is defined as the ability that an established pathogen spreads widely by infecting to already-infected individuals with other strains of a pathogen, is important to the evolution of pathogens. We examine the dynamics of plant reproduction and pathogen propagation considering spatial structure and the effect of superinfection on genetic diversity of pathogen by analysis of several models, 1-strain and multiple-strain models, on two-dimensional square lattice. In the analysis of 1-strain model, we derive equilibrium value by mean-field approximation and pair approximation, and its local stability by Routh-Hurwitz stability criterion. In the multiple-strain models, we analyze the dynamics by numerical simulation of mean-field approximation, pair approximation and Monte Carlo simulation. Through the analyses, we show the effect of parameter values to dynamics of models, such as transition of dominant strain of pathogen, competition between plants and pathogens and density of individuals. As a result, (i The strain with intermediate cost becomes dominant when both superinfection rate and growth rate are low. (ii The competition between plants and pathogens occurs in the phase of coexistence of various strains by pair approximation and Monte Carlo simulation. (iii Too high growth rate leads to the decrease of plant population in all models. (iv Pathogens are easy to maintain their genetic diversity with low superinfection rate. However, if they do not

  13. Pathogen Propagation Model with Superinfection in Vegetatively Propagated Plants on Lattice Space.

    Science.gov (United States)

    Sakai, Yuma; Takada, Takenori

    2016-01-01

    Many clonal plants have two reproductive patterns, seed propagation and vegetative propagation. By vegetative propagation, plants reproduce the genetically identical offspring with a low mortality, because resources are supplied from the other individuals through interconnected ramets at vegetative-propagated offspring. However, the ramets transport not only resources but also systemic pathogen. Pathogens evolve to establish and spread widely within the plant population. The superinfection, which is defined as the ability that an established pathogen spreads widely by infecting to already-infected individuals with other strains of a pathogen, is important to the evolution of pathogens. We examine the dynamics of plant reproduction and pathogen propagation considering spatial structure and the effect of superinfection on genetic diversity of pathogen by analysis of several models, 1-strain and multiple-strain models, on two-dimensional square lattice. In the analysis of 1-strain model, we derive equilibrium value by mean-field approximation and pair approximation, and its local stability by Routh-Hurwitz stability criterion. In the multiple-strain models, we analyze the dynamics by numerical simulation of mean-field approximation, pair approximation and Monte Carlo simulation. Through the analyses, we show the effect of parameter values to dynamics of models, such as transition of dominant strain of pathogen, competition between plants and pathogens and density of individuals. As a result, (i) The strain with intermediate cost becomes dominant when both superinfection rate and growth rate are low. (ii) The competition between plants and pathogens occurs in the phase of coexistence of various strains by pair approximation and Monte Carlo simulation. (iii) Too high growth rate leads to the decrease of plant population in all models. (iv) Pathogens are easy to maintain their genetic diversity with low superinfection rate. However, if they do not superinfect, the

  14. VEGETATIVE RESCUE AND CUTTINGS PROPAGATION OF Araucaria angustifolia (Bertol. Kuntze

    Directory of Open Access Journals (Sweden)

    Ivar Wendling

    2015-02-01

    Full Text Available Brazilian pine or araucaria (Araucaria angustifolia is a coniferous tree with great economic, social and environmental importance in southern Brazil, being exploited for both wood production and for its edible pine nuts. However, no efficient cloning techniques are available and, therefore, the purpose of this study was to evaluate the effectiveness of vegetative rescue methods for cuttings propagation of the species. Shoots/cuttings were generated in two ways: 26 years old trees underwent coppicing and 20 years old trees had the primary branches on the upper third of crown pruned at 2, 20 and 50 cm from the main trunk. Orthotropic shoots were rooted after application of indole-3-butyric acid (IBA at 0, 2, 4 and 6 g.L-1. Coppicing produced 47 cuttings per plant with 90% orthotropic shoots, while pruning resulted in 182 cuttings per plant with 44% orthotropic shoots. Rooting success indexes were low with no influence of IBA, although they are slightly superior to the ones available in the literature for the species, ranging from 12 to 30% for the coppice shoots and from 0 to 28% for the branches shoots. We conclude that both vegetative rescue techniques are viable and have potentially important applications. Coppicing is recommended for the propagation aiming the production of wood, while shoots derived from the side branches of the crown are more appropriate for seeds orchards formation.

  15. Vegetative propagation of the Azorean endemic shrub Viburnum treleasei Gand

    Directory of Open Access Journals (Sweden)

    MÓNICA MOURA

    2009-01-01

    Full Text Available Viburnum treleasei Gand. is a threatened hermaphroditic shrub or small tree endemic to the Azores islands. In this study we aimed at defining a fast, simple and cost-efficient propagation methodology that could be used by non-skilled workers in conservation actionplans. Our objective was also to produce cleaner material for initiation of in vitro cultures and to determine the effects of season, placement of cuttings in the branch, placement of vegetative buds in cuttings and forcing solutions in shoot development. It was possible to produce clean shoots from cuttings using a forcing solution with 8-hydroxyquinoline sulphate (8-HQS, 2% sucrose and no growth regulators addition. Shoot development results obtained with apical and sub-apical cuttings indicate that V. treleasei possessesapical dominance and deep endodormancy. Apical semihardwood cuttings in autumn or airlayered branches in autumn and winter with 2 or 5% (w/w of IBA produced excellent rooting results which will allow reinforcing depleted populations of V. treleasei efficientlyand at reduced costs.

  16. Early Season Softwood Cuttings Effective for Vegetative Propagation of Juglans cinerea

    Science.gov (United States)

    Paula M. Pijut; Melanie Moore

    2002-01-01

    Juglans cinerea L. (butternut) is a hardwood species valued for its wood and edible nuts. Information on the vegetative propagation of this species is currently unavailable. Our objective was to determine the conditions necessary for successful stem-cutting propagation of butternut. In 1999 and 2000, 10 trees (each year) were randomly selected from a...

  17. OBS ervations on the vegetative propagation of the marine alga, Gelidiella acerosa (Forssk) Feldmann and Hamel

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, P.P.S.; Tarwadi, S.J.; Chauhan, V.D.

    of this the present work on the vegetative propagation of the alga was planned. The cultures of the vegetative cut pieces of a frond of the species were grown in different culture media. The culture media were of sea water enriched with inorganic nutrient...

  18. Sexual and vegetative propagation of the medicinal Mexican species Phyllonoma laticuspis (Phyllonomaceae)

    OpenAIRE

    Alcántara-Flores, Ela; Brechú-Franco, Alicia Enriqueta; Villegas-Monter,Angel; Laguna-Hernández, Guillermo; Gómez-Campos, Armando

    2016-01-01

    Phyllonoma laticuspis leaves are used in Carrizal de Bravo, Guerrero, Mexico, to heal skin lesions such as injuries and smallpox sequelae and to treat diabetes mellitus type 2, and organic extracts of these leaves have been reported to exert antibacterial effects. High demand of P. laticuspis as a medicinal plant has decreased its natural populations, and propagation of the species has not yet been reported. Therefore, the purpose of this study was to assess the vegetative propagation of the ...

  19. Mucocele complicating stapled hemorrhoidopexy

    Directory of Open Access Journals (Sweden)

    Asia Grapsi

    2017-01-01

    Conclusion: Mucocele is a rare complication of stapled hemorrhoidopexy that may remain asymptomatic for a long period. In case of perineal discomfort after stapled procedure the physical examination combined with 3D 360° transanal ultrasound is necessary to reach the diagnosis. The knowledge of the possible rare complications is at the base of a correct treatment.

  20. Methanol production from Eucalyptus wood chips. Working Document 2. Vegetative propagation of Eucalypts

    Energy Technology Data Exchange (ETDEWEB)

    Fishkind, H.H.

    1982-04-01

    The feasibility of large-scale plantation establishment by various methods was examined, and the following conclusions were reached: seedling plantations are limited in potential yield due to genetic variation among the planting stock and often inadequate supplies of appropriate seed; vegetative propagation by rooted cuttings can provide good genetic uniformity of select hybrid planting stock; however, large-scale production requires establishment and maintenance of extensive cutting orchards. The collection of shoots and preparation of cuttings, although successfully implemented in the Congo and Brazil, would not be economically feasible in Florida for large-scale plantations; tissue culture propagation of select hybrid eucalypts offers the only opportunity to produce the very large number of trees required to establish the energy plantation. The cost of tissue culture propagation, although higher than seedling production, is more than off-set by the increased productivity of vegetative plantations established from select hybrid Eucalyptus.

  1. No male identity information loss during call propagation through dense vegetation: the case of the corncrake.

    Science.gov (United States)

    Ręk, Paweł; Osiejuk, Tomasz S

    2011-03-01

    Individually specific acoustic signals in birds are used in territorial defence. These signals enable a reduction of energy expenditure due to individual recognition between rivals and the associated threat levels. Mechanisms and acoustic cues used for individual recognition seem to be versatile among birds. However, most studies so far have been conducted on oscine species. Few studies have focused on exactly how the potential for individual recognition changes with distance between the signaller and receiver. We studied a nocturnally active rail species, the corncrake, which utters a seemingly simple disyllabic call. The inner call structure, however, is quite complex and expressed as intervals between maximal amplitude peaks, called pulse-to-pulse durations (PPD). The inner call is characterized by very low within-individual variation and high between-individuals difference. These variations and differences enable recognition of individuals. We conducted our propagation experiments in a natural corncrake habitat. We found that PPD was not affected by transmission. Correct individual identification was possible regardless of the distance and position of the microphone which was above the ground. The results for sounds from the extreme distance propagated through the vegetation compared to those transmitted above the vegetation were even better. These results support the idea that PPD structure has evolved under selection favouring individual recognition in a species signalling at night, in a dense environment and close to the ground. 2011 Elsevier B.V. All rights reserved.

  2. Diversity-oriented peptide stapling

    DEFF Research Database (Denmark)

    Tran, Thu Phuong; Larsen, Christian Ørnbøl; Røndbjerg, Tobias

    2017-01-01

    The introduction of macrocyclic constraints in peptides (peptide stapling) is an important tool within peptide medicinal chemistry for stabilising and pre-organising peptides in a desired conformation. In recent years, the copper-catalysed azide-alkyne cycloaddition (CuAAC) has emerged...... as a powerful method for peptide stapling. However, to date CuAAC stapling has not provided a simple method for obtaining peptides that are easily diversified further. In the present study, we report a new diversity-oriented peptide stapling (DOPS) methodology based on CuAAC chemistry. Stapling of peptides...... incorporating two azide-modified amino acids with 1,3,5-triethynylbenzene efficiently provides (i, i+7)- and (i, i+9)-stapled peptides with a single free alkyne positioned on the staple, that can be further conjugated or dimerised. A unique feature of the present method is that it provides easy access...

  3. Giant kelp vegetative propagation: Adventitious holdfast elements rejuvenate senescent individuals of the Macrocystis pyrifera "integrifolia" ecomorph.

    Science.gov (United States)

    Murúa, Pedro; Müller, Dieter G; Patiño, David J; Westermeier, Renato

    2017-02-01

    Recent findings on holdfast development in the giant kelp highlighted its key importance for Macrocystis vegetative propagation. We report here for the first time the development of adventitious holdfasts from Macrocystis stipes. Swellings emerge spontaneously from different areas of the stipes, especially in senescent or creeping individuals. After being manually fastened to solid substrata, these swellings elongated into haptera, which became strongly attached after 1 month. Within 4 months, new thalli increased in size and vitality, and developed reproductive fronds. Our results suggest the usage of these structures for auxiliary attachment techniques. These could act as a backup, when primary holdfasts are weak, and thus improve the survival rate of the giant kelp in natural beds. © 2016 Phycological Society of America.

  4. Transfer of knowledge about flowering and vegetative propagation from model species to bulbous plants.

    Science.gov (United States)

    Leeggangers, Hendrika A C F; Moreno-Pachon, Natalia; Gude, Henk; Immink, Richard G H

    2013-01-01

    The extensive characterization of plant genes and genome sequences summed to the continuous development of biotechnology tools, has played a major role in understanding biological processes in plant model species. The challenge for the near future is to generate methods and pipelines for an efficient transfer of this knowledge to economically important crops and other plant species. In the case of flower bulbs, which are economically very important for the ornamental industry, flowering time control and vegetative propagation constitute the most relevant processes for agronomical improvements. Those processes have been reasonably studied in reference species, making them excellent candidates for translational investigations in bulbous plant species. The approaches that can be taken for the transfer of biological knowledge from model to non-model species can be roughly categorized as "bottom-up" or "top-down". The former approach usually goes from individual genes to systems, also known as a "gene-by-gene" approach. It assumes conservation of molecular pathways and therefore makes use of sequence homology searches to identify candidate genes. "Top-down" methodologies go from systems to genes, and are e.g. based on large scale transcriptome profiling via heterologous microarrays or RNA sequencing, followed by the identification of associations between phenotypes, genes, and gene expression patterns and levels. In this review, examples of the various knowledge-transfer approaches are provided and pros and cons are discussed. Due to the latest developments in transgenic research and next generation sequencing and the emerging of systems biology as a matured research field, transfer of knowledge concerning flowering time and vegetative propagation capacity in bulbous species are now within sight.

  5. Vegetative propagation of insulin (Cissus verticillata (L. Nicolson & C.E. Jarvis by cutting

    Directory of Open Access Journals (Sweden)

    C.T.A. CRUZ-SILVA

    2015-03-01

    Full Text Available Propagation techniques may support handling, this way providing an alternative for producers of medicinal plants, thus avoiding indiscriminate collection. We aimed to evaluate the size of cuttings with and without leaves on the seedling production of insulin (Cissus verticillata (L. Nicolson & C.E. Jarvis. The herbaceous apical cuttings were prepared with diagonal cut at the bottom and straight cut at the apex, with 5, 10 or 15 cm in length, kept with two whole leaves, two leaves cut in half or without leaves, being sterilized with sodium hypochlorite at 0.5% for 15 minutes. The cuttings were planted in plastic containers with 180 mL capacity with vermiculite as substrate and placed in greenhouse at the temperature of 22 ± 2° C. The experimental design was completely randomized and means were compared by Tukey's test at 5% probability. After 60 days, we found that the cutting of 5 cm with whole leaves and with leaves cut in half and the cutting of 10 cm with whole leaves had rates above 70% of rooting with the best means for number and length of roots. There was a high mortality rate for cuttings made without leaves. The callus and the percentage of live cuttings were not significant for the treatments. Therefore, 5 cm long cuttings with whole or half leaves and 10 cm long cuttings with whole leaves are the most suitable for the vegetative propagation of insulin.

  6. The effect of propagation methods on some growth and physiological characteristics of seed- and vegetatively propagated Eucalyptus varieties

    CSIR Research Space (South Africa)

    Mokotedi, O

    2011-11-01

    Full Text Available - and macro- propagated GN; however, roots of the latter were 32% more efficient in conducting water to the leaves (Table 1). OSCAR MOKOTEDI1,2, PAULA WATT2 , NORMAN PAMMENTER2 Presented at the IURO 2011 Eucalyptus conference in Porto Seguro, Brazil Table...

  7. The stapl Skeleton Framework

    KAUST Repository

    Zandifar, Mani

    2015-01-01

    © Springer International Publishing Switzerland 2015. This paper describes the stapl Skeleton Framework, a highlevel skeletal approach for parallel programming. This framework abstracts the underlying details of data distribution and parallelism from programmers and enables them to express parallel programs as a composition of existing elementary skeletons such as map, map-reduce, scan, zip, butterfly, allreduce, alltoall and user-defined custom skeletons. Skeletons in this framework are defined as parametric data flow graphs, and their compositions are defined in terms of data flow graph compositions. Defining the composition in this manner allows dependencies between skeletons to be defined in terms of point-to-point dependencies, avoiding unnecessary global synchronizations. To show the ease of composability and expressivity, we implemented the NAS Integer Sort (IS) and Embarrassingly Parallel (EP) benchmarks using skeletons and demonstrate comparable performance to the hand-optimized reference implementations. To demonstrate scalable performance, we show a transformation which enables applications written in terms of skeletons to run on more than 100,000 cores.

  8. Juvenility and serial vegetative propagation of Norway spruce clones (Picea abies Karst.).

    Science.gov (United States)

    J.B. St. Clair; J. Kleinschmit; J. Svolba

    1985-01-01

    Effects associated with progressive maturation of clones are of greatest concern in clonal tree improvement programs. Serial propagation has been in use at the Lower Saxony Forest Research Institute since 1968 to arrest maturation in Norway spruce clones. By 1980 cuttings were established in the nursery that had been serially propagated from one to five cycles. This...

  9. The STAPL pList

    KAUST Repository

    Tanase, Gabriel

    2010-01-01

    We present the design and implementation of the stapl pList, a parallel container that has the properties of a sequential list, but allows for scalable concurrent access when used in a parallel program. The Standard Template Adaptive Parallel Library (stapl) is a parallel programming library that extends C++ with support for parallelism. stapl provides a collection of distributed data structures (pContainers) and parallel algorithms (pAlgorithms) and a generic methodology for extending them to provide customized functionality. stapl pContainers are thread-safe, concurrent objects, providing appropriate interfaces (e.g., views) that can be used by generic pAlgorithms. The pList provides stl equivalent methods, such as insert, erase, and splice, additional methods such as split, and efficient asynchronous (non-blocking) variants of some methods for improved parallel performance. We evaluate the performance of the stapl pList on an IBM Power 5 cluster and on a CRAY XT4 massively parallel processing system. Although lists are generally not considered good data structures for parallel processing, we show that pList methods and pAlgorithms (p-generate and p-partial-sum) operating on pLists provide good scalability on more than 103 processors and that pList compares favorably with other dynamic data structures such as the pVector. © 2010 Springer-Verlag.

  10. Vegetative propagation of Plukenetia polyadenia by cuttings: effects of leaf area and indole-3-butyric acid concentration

    Directory of Open Access Journals (Sweden)

    R. Solis

    Full Text Available Abstract The seeds of Plukenetia polyadenia have high levels of unsaturated fatty acids and are used as medicine and food for native people in the Peruvian and Brazilian Amazon. The objective of this study was to develop a method for vegetative propagation of Plukenetia polyadenia by rooting of cuttings. The experiment was laid out in a randomized complete block design with 12 treatments and 3 replications of 8 cuttings, in a 3 × 4 factorial arrangement. The factors were: 3 levels of leaf area (25, 50 and 75% and 3 indole-3-butyric acid - IBA concentrations (9.84, 19.68 and 29.52mM and a control without IBA. Data were submitted to analysis of variance and means were compared by Tukey test at 5% probability. Our results show that the use of cuttings with 50% of leaf area and treatment with 29.52mM of IBA induced high percentages of rooting (93% and the best root formation. Vegetative propagation of Plukenetia polyadenia by cuttings will be used as a tool to conserve and propagate germplasm in breeding programs.

  11. Vegetative propagation of Plukenetia polyadenia by cuttings: effects of leaf area and indole-3-butyric acid concentration.

    Science.gov (United States)

    Solis, R; Pezo, M; Diaz, G; Arévalo, L; Cachique, D

    2017-01-01

    The seeds of Plukenetia polyadenia have high levels of unsaturated fatty acids and are used as medicine and food for native people in the Peruvian and Brazilian Amazon. The objective of this study was to develop a method for vegetative propagation of Plukenetia polyadenia by rooting of cuttings. The experiment was laid out in a randomized complete block design with 12 treatments and 3 replications of 8 cuttings, in a 3 × 4 factorial arrangement. The factors were: 3 levels of leaf area (25, 50 and 75%) and 3 indole-3-butyric acid - IBA concentrations (9.84, 19.68 and 29.52mM) and a control without IBA. Data were submitted to analysis of variance and means were compared by Tukey test at 5% probability. Our results show that the use of cuttings with 50% of leaf area and treatment with 29.52mM of IBA induced high percentages of rooting (93%) and the best root formation. Vegetative propagation of Plukenetia polyadenia by cuttings will be used as a tool to conserve and propagate germplasm in breeding programs.

  12. Modeling of Beam Wave Pulse Propagation in Vegetation Using Transport Theory

    National Research Council Canada - National Science Library

    Whitman, Gerald M; Schwering, Felix K; Yu-Chi Wu, Michael

    2005-01-01

    The scalar time-dependent equation of radiative transfer in cylindrical coordinates was used to develop several new theories- both rigorous and approximate- for propagation and scattering of beam wave...

  13. Argan tree (Argania spinosa L. skeels vegetative propagation by cutting and grafting

    Directory of Open Access Journals (Sweden)

    M.L. Metougui

    2018-01-01

    Full Text Available The argan tree (Argania spinosa L. skeels is an endemic species of Morocco that plays an important socioeconomic role through the value of its oil. Despite the importance of the species, the main propagation method is still by seeds, which presents several disadvantages, including a long juvenile phase and high genetic variability between plants. The aim of this work is to study from one side the genotype and source of calcium (CaCl2 and Ca(NO32 effects on the cutting yield, and from the other side the effect of the rootstock and the graft genotype on the grafting method’s success and finally compare between the both methods for argan massive propagation. The results exhibited an important genotype effect on the cutting; in fact, each of the four propagated genotypes reacted differently to this propagation method. The calcium treatment did not improve the cutting rooting, whereas its disinfectant effect depended on the genotype. From the other side, the grafting success depended mainly on the graft/rootstock compatibility, but little on the graft genotype and not at all on the rootstock genotype. The comparison between the two propagation methods showed that grafting is more suitable for argan tree propagation. The highest success rate reached through the cutting was 66.7 % with the best genotype, whereas by grafting the best rate was off 95.8% attended by two of twelve graft/rootstock combinations tested.

  14. Vegetative propagation of Plukenetia polyadenia by cuttings: effects of leaf area and indole-3-butyric acid concentration

    OpenAIRE

    Solis, R.; Pezo, M.; Diaz, G.; Arévalo, L.; Cachique, D.

    2016-01-01

    Abstract The seeds of Plukenetia polyadenia have high levels of unsaturated fatty acids and are used as medicine and food for native people in the Peruvian and Brazilian Amazon. The objective of this study was to develop a method for vegetative propagation of Plukenetia polyadenia by rooting of cuttings. The experiment was laid out in a randomized complete block design with 12 treatments and 3 replications of 8 cuttings, in a 3 × 4 factorial arrangement. The factors were: 3 levels of leaf are...

  15. Analysis of Radio Wave Propagation for ISM 2.4 GHz Wireless Sensor Networks in Inhomogeneous Vegetation Environments

    Science.gov (United States)

    Azpilicueta, Leire; López-Iturri, Peio; Aguirre, Erik; Mateo, Ignacio; Astrain, José Javier; Villadangos, Jesús; Falcone, Francisco

    2014-01-01

    The use of wireless networks has experienced exponential growth due to the improvements in terms of battery life and low consumption of the devices. However, it is compulsory to conduct previous radio propagation analysis when deploying a wireless sensor network. These studies are necessary to perform an estimation of the range coverage, in order to optimize the distance between devices in an actual network deployment. In this work, the radio channel characterization for ISM 2.4 GHz Wireless Sensor Networks (WSNs) in an inhomogeneous vegetation environment has been analyzed. This analysis allows designing environment monitoring tools based on ZigBee and WiFi where WSN and smartphones cooperate, providing rich and customized monitoring information to users in a friendly manner. The impact of topology as well as morphology of the environment is assessed by means of an in-house developed 3D Ray Launching code, to emulate the realistic operation in the framework of the scenario. Experimental results gathered from a measurement campaign conducted by deploying a ZigBee Wireless Sensor Network, are analyzed and compared with simulations in this paper. The scenario where this network is intended to operate is a combination of buildings and diverse vegetation species. To gain insight in the effects of radio propagation, a simplified vegetation model has been developed, considering the material parameters and simplified geometry embedded in the simulation scenario. An initial location-based application has been implemented in a real scenario, to test the functionality within a context aware scenario. The use of deterministic tools can aid to know the impact of the topological influence in the deployment of the optimal Wireless Sensor Network in terms of capacity, coverage and energy consumption, making the use of these systems attractive for multiple applications in inhomogeneous vegetation environments. PMID:25513820

  16. Analysis of radio wave propagation for ISM 2.4 GHz Wireless Sensor Networks in inhomogeneous vegetation environments.

    Science.gov (United States)

    Azpilicueta, Leire; López-Iturri, Peio; Aguirre, Erik; Mateo, Ignacio; Astrain, José Javier; Villadangos, Jesús; Falcone, Francisco

    2014-12-10

    The use of wireless networks has experienced exponential growth due to the improvements in terms of battery life and low consumption of the devices. However, it is compulsory to conduct previous radio propagation analysis when deploying a wireless sensor network. These studies are necessary to perform an estimation of the range coverage, in order to optimize the distance between devices in an actual network deployment. In this work, the radio channel characterization for ISM 2.4 GHz Wireless Sensor Networks (WSNs) in an inhomogeneous vegetation environment has been analyzed. This analysis allows designing environment monitoring tools based on ZigBee and WiFi where WSN and smartphones cooperate, providing rich and customized monitoring information to users in a friendly manner. The impact of topology as well as morphology of the environment is assessed by means of an in-house developed 3D Ray Launching code, to emulate the realistic operation in the framework of the scenario. Experimental results gathered from a measurement campaign conducted by deploying a ZigBee Wireless Sensor Network, are analyzed and compared with simulations in this paper. The scenario where this network is intended to operate is a combination of buildings and diverse vegetation species. To gain insight in the effects of radio propagation, a simplified vegetation model has been developed, considering the material parameters and simplified geometry embedded in the simulation scenario. An initial location-based application has been implemented in a real scenario, to test the functionality within a context aware scenario. The use of deterministic tools can aid to know the impact of the topological influence in the deployment of the optimal Wireless Sensor Network in terms of capacity, coverage and energy consumption, making the use of these systems attractive for multiple applications in inhomogeneous vegetation environments.

  17. Analysis of Radio Wave Propagation for ISM 2.4 GHz Wireless Sensor Networks in Inhomogeneous Vegetation Environments

    Directory of Open Access Journals (Sweden)

    Leire Azpilicueta

    2014-12-01

    Full Text Available The use of wireless networks has experienced exponential growth due to the improvements in terms of battery life and low consumption of the devices. However, it is compulsory to conduct previous radio propagation analysis when deploying a wireless sensor network. These studies are necessary to perform an estimation of the range coverage, in order to optimize the distance between devices in an actual network deployment. In this work, the radio channel characterization for ISM 2.4 GHz Wireless Sensor Networks (WSNs in an inhomogeneous vegetation environment has been analyzed. This analysis allows designing environment monitoring tools based on ZigBee and WiFi where WSN and smartphones cooperate, providing rich and customized monitoring information to users in a friendly manner. The impact of topology as well as morphology of the environment is assessed by means of an in-house developed 3D Ray Launching code, to emulate the realistic operation in the framework of the scenario. Experimental results gathered from a measurement campaign conducted by deploying a ZigBee Wireless Sensor Network, are analyzed and compared with simulations in this paper. The scenario where this network is intended to operate is a combination of buildings and diverse vegetation species. To gain insight in the effects of radio propagation, a simplified vegetation model has been developed, considering the material parameters and simplified geometry embedded in the simulation scenario. An initial location-based application has been implemented in a real scenario, to test the functionality within a context aware scenario. The use of deterministic tools can aid to know the impact of the topological influence in the deployment of the optimal Wireless Sensor Network in terms of capacity, coverage and energy consumption, making the use of these systems attractive for multiple applications in inhomogeneous vegetation environments.

  18. The STAPL pView

    KAUST Repository

    Buss, Antal

    2011-01-01

    The Standard Template Adaptive Parallel Library (STAPL) is a C++ parallel programming library that provides a collection of distributed data structures (pContainers) and parallel algorithms (pAlgorithms) and a generic methodology for extending them to provide customized functionality. STAPL algorithms are written in terms of pViews, which provide a generic access interface to pContainer data by abstracting common data structure concepts. Briefly, pViews allow the same pContainer to present multiple interfaces, e.g., enabling the same pMatrix to be \\'viewed\\' (or used) as a row-major or column-major matrix, or even as a vector. In this paper, we describe the stapl pView concept and its properties. pViews generalize the iterator concept and enable parallelism by providing random access to, and an ADT for, collections of elements. We illustrate how pViews provide support for managing the tradeoff between expressivity and performance and examine the performance overhead incurred when using pViews. © 2011 Springer-Verlag Berlin Heidelberg.

  19. A combustion model of vegetation burning in "Tiger" fire propagation tool

    Science.gov (United States)

    Giannino, F.; Ascoli, D.; Sirignano, M.; Mazzoleni, S.; Russo, L.; Rego, F.

    2017-11-01

    In this paper, we propose a semi-physical model for the burning of vegetation in a wildland fire. The main physical-chemical processes involved in fire spreading are modelled through a set of ordinary differential equations, which describe the combustion process as linearly related to the consumption of fuel. The water evaporation process from leaves and wood is also considered. Mass and energy balance equations are written for fuel (leaves and wood) assuming that combustion process is homogeneous in space. The model is developed with the final aim of simulating large-scale wildland fires which spread on heterogeneous landscape while keeping the computation cost very low.

  20. Vegetative propagation capacity of invasive alligator weed through small stolon fragments under different treatments.

    Science.gov (United States)

    Peng, Xuemei; Li, Haiyan; Yang, Yunfei; Zhi, Heng; Li, Chengcheng; Guo, Jian

    2017-03-06

    The ability to propagate via small diaspores is crucial for the invasion of a clone plant that does not reproduce sexually in its introduced range. We investigated the effects of node and internode adjacent mode, fragment type, burial orientation and position of the node in relation to the soil surface on the sprouting and growth of alligator weed (Alternanthera philoxeroides (Martius) Griseb.). All the factors had effects and interaction effects on the sprouting rate and growth. As a whole fragment in all treatments, the fragments with basal node buried upward on the soil surface, exhibited the best above-ground growth and root growth. The one-node fragment with basal node buried downward above the soil surface and upward under the soil surface significantly decreased the above-ground growth and root growth compared to that of the two-node fragment. Therefore, the one-node fragments were more affected by environmental conditions than the two-node fragments. The results indicated that reducing the number of nodes of a fragment and burying the node under the soil or orienting it downward above the soil surface could be applied to control the invasion of alligator weed.

  1. In vitro culture used for woody fern Cyathea australis (R. Br. domin vegetative propagation

    Directory of Open Access Journals (Sweden)

    Katarzyna Goller

    2014-01-01

    Full Text Available Experiments have been carried out on vegetative multiplication of Cyathea australis. Cultures were initiated from spores collected from sporangium of mature fronds. Spores were sterilized in 3% chloramine with Tween and sown on Anderson (1984 medium supplemented with 80.0 mg/l of Ads and solidified by 8.0 g/l of agar. After three months of spore germination overgrowth of prothallia was observed. Multiplication of prothallia was stimulated by MS (1962 medium supplemented with 0.25 mg/l BAP, 0.50 mg/l IBA, 0.50 mg/l IAA, 1.00 mg/l GA3, 40.00 mg/l Ads and sucrose 30.0 g/l. Small drops of water were placed on the basal part of gametophyte in order to help ovary fertilization. After the next few weeks the first very fragile, small and green crosier emerged from the base of gametophyte. Perlite culture stimulated root formation and plant hardening to soil conditions.

  2. Propagação vegetativa de Lippia alba Vegetative propagation of Lippia alba

    Directory of Open Access Journals (Sweden)

    Luiz Antônio Biasi

    2003-06-01

    Full Text Available A Lippia alba é uma planta medicinal nativa da América do Sul muito utilizada pela sua propriedade calmante. No presente trabalho estudou-se a propagação vegetativa dessa espécie, visando a obtenção de uma forma eficiente de formação de mudas. Foram testados diferentes tipos de estaca (medianas com 4 folhas, medianas com 2 folhas, medianas sem folhas e apicais, tamanhos de estacas lenhosas (5, 10, 15 e 20cm e substratos (casca de arroz carbonizada, vermiculita, solo e Plantmax®. Todos os tipos de estaca apresentaram altas taxas de enraizamento, comprovando que a L. alba é uma espécie de fácil enraizamento. As estacas medianas com quatro folhas foram as que apresentaram o maior desenvolvimento radicial, ao contrário das estacas sem folhas. As estacas com duas folhas também apresentaram bom crescimento radicial, facilidade de manuseio e o dobro do rendimento no preparo das estacas em relação as com quatro folhas. Os substratos não afetaram a porcentagem de enraizamento, mas a maior massa de raízes foi obtida com casca de arroz carbonizada. O aumento do tamanho da estaca lenhosa proporcionou um aumento linear em todas as variáveis analisadas. Conclui-se que a produção de mudas de L. alba pode ser realizada com estacas semilenhosas com um par de folhas ou com estacas lenhosas com 20cm de comprimento em substratos porosos e sem necessidade de irrigação por nebulização.Lippia alba is a medicinal plant native of the South America it is used because of its sedative property. In this work the cutting propagation of this species was studied aiming at obtain an efficient protocol of plant production. Different types of cuttings were tested (middle with 4 leaves, middle with two leaves, middle without leaves and apical, length of hardwood cuttings (5, 10, 15 and 20cm and substrates (carbonized rice hulls, vermiculite, soil and Plantmax®. All types of cuttings showed high rates of rooting, confirming that L. alba is an easy to root

  3. Vegetation

    DEFF Research Database (Denmark)

    Epstein, H.E.; Walker, D.A.; Bhatt, U.S.

    2012-01-01

    • Over the past 30 years (1982-2011), the Normalized Difference Vegetation Index (NDVI), an index of green vegetation, has increased 15.5% in the North American Arctic and 8.2% in the Eurasian Arctic. In the more southern regions of Arctic tundra, the estimated aboveground plant biomass has...... in vegetation (including shrub tundra expansion) and thunderstorm activity, each a result of Arctic warming, have created conditions that favor a more active Arctic fire regime....

  4. Unmanaged sexual reproduction and the dynamics of genetic diversity of a vegetatively propagated crop plant, cassava (Manihot esculenta Crantz), in a traditional farming system.

    Science.gov (United States)

    Elias, M; Penet, L; Vindry, P; McKey, D; Panaud, O; Robert, T

    2001-08-01

    Occurrence of intervarietal or interspecific natural crosses has been reported for many crop plants in traditional farming systems, underlining the potential importance of this source of genetic exchange for the dynamics of genetic diversity of crop plants. In this study, we use microsatellite loci to investigate the role of volunteer seedlings (plants originating from unmanaged sexual reproduction) in the dynamics of genetic diversity of cassava (Manihot esculenta Crantz), a vegetatively propagated crop, in a traditional farming system in Guyana. A previous field study showed that farmers incorporate such plants into the germplasm for vegetative propagation, and that many of them are likely to be assigned by farmers to recognized varieties. Under strict vegetative propagation clonality of varieties is expected. The high proportion of polyclonal varieties observed suggests that incorporation of seedlings into the germplasm for propagation is a frequent event. The molecular variability assessed with microsatellite markers shows that there is high differentiation among heterozygous varieties, whereas populations of seedlings do not depart from the proportions expected under Hardy-Weinberg assumptions. Assignment of seedlings to a recognized variety on the basis of morphological similarity greatly increases genetic diversity within the variety. We argue that recombination and gene flow play a major role in the dynamics of genetic diversity of cassava in traditional farming systems. Documenting unmanaged sexual reproduction and its genetic consequences is a prerequisite for defining strategies of in situ conservation of crop plant genetic resources.

  5. Biofortification of staple food crops.

    Science.gov (United States)

    Nestel, Penelope; Bouis, Howarth E; Meenakshi, J V; Pfeiffer, Wolfgang

    2006-04-01

    Deficiencies of vitamin A, iron, and zinc affect over one-half of the world's population. Progress has been made to control micronutrient deficiencies through supplementation and food fortification, but new approaches are needed, especially to reach the rural poor. Biofortification (enriching the nutrition contribution of staple crops through plant breeding) is one option. Scientific evidence shows this is technically feasible without compromising agronomic productivity. Predictive cost-benefit analyses also support biofortification as being important in the armamentarium for controlling micronutrient deficiencies. The challenge is to get producers and consumers to accept biofortified crops and increase their intake of the target nutrients. With the advent of good seed systems, the development of markets and products, and demand creation, this can be achieved.

  6. The STAPL Parallel Graph Library

    KAUST Repository

    Harshvardhan,

    2013-01-01

    This paper describes the stapl Parallel Graph Library, a high-level framework that abstracts the user from data-distribution and parallelism details and allows them to concentrate on parallel graph algorithm development. It includes a customizable distributed graph container and a collection of commonly used parallel graph algorithms. The library introduces pGraph pViews that separate algorithm design from the container implementation. It supports three graph processing algorithmic paradigms, level-synchronous, asynchronous and coarse-grained, and provides common graph algorithms based on them. Experimental results demonstrate improved scalability in performance and data size over existing graph libraries on more than 16,000 cores and on internet-scale graphs containing over 16 billion vertices and 250 billion edges. © Springer-Verlag Berlin Heidelberg 2013.

  7. Endoscopic stapling of pharyngeal pouch: a 10-year review of single versus multiple staple rows.

    Science.gov (United States)

    Roth, Jason A; Sigston, Elizabeth; Vallance, Neil

    2009-02-01

    To compare the outcomes obtained in patients undergoing endoscopic stapling of pharyngeal pouches with single versus multiple rows of staples. A retrospective, 10-year review. Review of medical records in 38 patients who underwent endoscopic pharyngeal pouch repair. Patients who underwent stapling with multiple rows had a higher postoperative leak rate than patients who were stapled with a single row (36% vs 0%, P multiple rows also had a more prolonged length of stay and a slower return to both clear fluids and solid diet (P row of staples may be necessary to divide the common wall. However, in our series this is associated with a significantly increased risk of esophageal or pouch perforation. Care should be taken during the placement of multiple rows of staples.

  8. 7 CFR 28.307 - Bale of different staple lengths.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Bale of different staple lengths. 28.307 Section 28... for Length of Staple § 28.307 Bale of different staple lengths. Whenever the length of staple of cotton taken from one part of a bale is different from that taken from another part of the same bale, the...

  9. Staple line oversewing during laparoscopic sleeve gastrectomy.

    Science.gov (United States)

    Wang, H; Lu, J; Feng, J; Wang, Z

    2017-09-01

    Introduction This meta-analysis was performed to assess the possible benefits of staple line oversewing during laparoscopic sleeve gastrectomy. Methods A comprehensive search up to February 2017 was conducted on PubMed, the Web of Science™ and Embase™. All eligible studies were included, and the outcomes of staple line bleeding and leak, overall complications and operative time were pooled. Results A total of 7 randomised controlled trials involving 845 patients (428 cases and 417 controls) were analysed. There was no significant difference in staple line bleeding (relative risk [RR]: 0.858, 95% confidence interval [CI]: 0.343-2.143, p=0.742), leak (RR: 0.650, 95% CI: 0.257-1.644, p=0.363) or overall complications (RR: 0.913, 95% CI: 0.621-1.342, p=0.644) between the oversewing group and the patients who did not have oversewing. Oversewing of the staple line was associated with a longer operative time (weighted mean difference: 14.400, 95% CI: 7.198-21.602, p=0.000). Conclusions Oversewing the staple line during laparoscopic sleeve gastrectomy does not decrease the risk of staple line bleeding, leakage or overall complications but it does prolong the operative time.

  10. A New Methodology for Incorporating Chiral Linkers into Stapled Peptides.

    Science.gov (United States)

    Serrano, Juan C; Sipthorp, James; Xu, Wenshu; Itzhaki, Laura S; Ley, Steven V

    2017-06-19

    Stapled peptides have arisen as a new class of chemical probe and potential therapeutic agents for modulating protein-protein interactions. Here, we report the first two-component i,i+7 stapling methodology that makes use of two orthogonal, on-resin stapling reactions to incorporate linkers bearing a chiral centre into a p53-derived stapled peptide. Post-stapling modifications to the chain were performed on-resin and enabled rapid access to various peptide derivatives from a single staple. The stapled peptides have increased helicity, protease stability and in vitro binding affinities to MDM2 compared to the equivalent unstapled peptide. This approach can be used to generate a library of diverse stapled peptides with different properties starting from a single stapled peptide, with scope for much greater functional diversity than that provided by existing stapling methodologies. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  11. Propagação vegetativa de abacateiro por estaquia Vegetative propagation of avocado, by stem cuttings

    Directory of Open Access Journals (Sweden)

    Samar Velho da Silveira

    2004-04-01

    Full Text Available Visando a propagar vegetativamente o abacateiro (Persea sp. por meio de estacas, estiolaram-se ramos em mudas das cultivares Ouro Verde e Baronesa. Após a obtenção destas mudas por garfagem de fenda cheia, podou-se a parte aérea das mesmas 10 cm acima do ponto de enxertia. Metade das mudas foi colocada em câmara escura, coberta com polietileno preto, visando a forçar brotação estiolada, enquanto a outra metade foi posta a brotar em casa de vegetação, anelando-se a base de todos os ramos estiolados e não estiolados. Um mês após a poda das mudas, confeccionaram-se estacas, tanto de ramos estiolados quanto de não estiolados, com 20cm de comprimento e quatro folhas maduras, que foram tratadas com solução de 2000 mg L-1 de ácido indolbutírico (AIB, durante 10 segundos e colocadas, individualmente, em vasos plásticos pretos de 500 ml, contendo casca de arroz carbonizada como substrato. Após dois meses, estas foram repicadas para sacos de polietileno com capacidade para cinco litros. No momento do transplante, a taxa de enraizamento das estacas estioladas e não estioladas foi de 62,5% e 12,5%, respectivamente, para a cultivar Ouro Verde. A cultivar Baronesa não enraizou em nenhum caso. Após o transplante, as percentagens de enraizamento mantiveram-se as mesmas para a cultivar Ouro Verde, aumentando, contudo, o número de raízes por estaca. Já, para a cultivar Baronesa, as estacas não estioladas passaram a apresentar 12,5% de enraizamento, enquanto as estioladas continuaram com 0%.With the objetive to propagate avocados vegetatively by means of stem cuttings, branches of cultivars Ouro Verde and Baronesa were forced to etiolate. Grafted avocado plants were prunned 10 cm above of the grafting point. Half of those plants were covered with black polyethylene and placed in a darkroom. The other half of those plants were transfered to a greenhouse. The branches formed were girdled at the base. One month after the plants had been

  12. A study on ionization potential and electron trap of vegetable insulating oil related to streamer inception and propagation

    Science.gov (United States)

    Li, Jian; Wang, Yachao; Wang, Feipeng; Liang, Suning; Lin, Xiang; Chen, Xiuping; Zhou, Jinghan

    2017-11-01

    Vegetable oils, mainly composed of triacylglycerol molecules, have been widely studied as new insulation materials in the recent years. In this work, we study the electronic properties of various triacylglycerol molecules with different degree of unsaturation by density functional theory (DFT). The ionization potential (IP), electron affinity (EA), and electron trap are estimated by theoretical analysis and experiments. The results show that the C atoms of cis Cdbnd C double bond make the primary contribution to the highest occupied molecular orbital (HOMO) of unsaturated triacylglycerol molecule; the IPs of fully unsaturated triacylglycerol molecules are almost confined to the narrow ranges from 7.30 to 7.45 eV in gas-phase and from 6.77 to 6.84 eV in liquid-phase correspond to LnLnLn and OOO molecules, respectively; the atoms of ester group and neighboring atoms make the primary contribution to the lowest unoccupied molecular orbital (LUMO) of both saturated and unsaturated triacylglycerol molecules; the EAs of triacylglycerol molecules are confined to the narrow ranges from -0.34 to -0.18 eV and the chemical trap is estimated to be 0-0.16 eV; the total trap is 0.32-0.36 eV. The IP distribution character and shallow trap feature maybe the main causes that vegetable oils demonstrate a low resistance against the fast streamers. The work can provide theoretical basis to molecular modification for performance improvement of vegetable insulating oils.

  13. Advantages of handsewn over stapled bowel anastomosis.

    Science.gov (United States)

    Dziki, A J; Duncan, M D; Harmon, J W; Saini, N; Malthaner, R A; Trad, K S; Fernicola, M T; Hakki, F; Ugarte, R M

    1991-06-01

    Bowel anastomoses are conventionally performed using a handsewn technique or a stapling device. Each has potential benefits and disadvantages. The most clinically significant complications of the bowel anastomosis are anastomotic leakage and stricture formation. The indices of healing and tissue cohesion were compared dynamically over time in 24 dogs randomized to undergo either a standard two-layer handsewn anastomosis or a stapled anastomosis with the Premium CEEA (United States Surgical Corporation, Norwalk, CT). Animals were sacrificed at 1, 4, 7, and 28 days postoperatively. Each anastomosis was evaluated for anastomotic index, burst pressure, collagen content, and histologic appearance. The anastomotic index was similar on postoperative day (POD) 1, 4, and 7; but on day 28 all handsewn anastomoses had larger diameters than the widest CEEA anastomosis. Burst pressure was higher in handsewn anastomoses at all intervals. Collagen content tended to be higher on POD 7 in the CEEA anastomoses. Histological evaluation showed more complete epithelialization and less inflammation in handsewn anastomoses on POD 28. The higher level of collagen in the CEEA anastomoses on POD 7 may be implicated in the tendency toward stricture formation found with this type of anastomosis. This study demonstrates that the greater speed and ease of the stapled anastomosis is offset by the greater strength, reduced tendency to stricture, and more complete healing of the handsewn anastomosis.

  14. Impacts of tourism hotspots on vegetation communities show a higher potential for self-propagation along roads than hiking trails.

    Science.gov (United States)

    Wolf, Isabelle D; Croft, David B

    2014-10-01

    Vegetation communities along recreational tracks may suffer from substantial edge-effects through the impacts of trampling, modified environmental conditions and competition with species that benefit from disturbance. We assessed impacts on trackside vegetation by comparing high and low usage tourism sites at a 1-10 m distance from recreational tracks in a popular arid-lands tourism destination in South Australia. The central aim was quantification of the strengths and spatial extent of tourism impacts along recreational tracks with a qualitative comparison of roads and trails. Track-distance gradients were most prevalent at high usage sites. There, species community composition was altered, total plant cover decreased, non-native species cover increased, plant diversity increased or decreased (depending on the distance) and soil compaction increased towards recreational tracks. Roadside effects were greater and more pervasive than trailside effects. Further, plant diversity did not continuously increase towards the road verge as it did along trails but dropped sharply in the immediate road shoulder which indicated high disturbance conditions that few species were able to tolerate. To our knowledge, we are the first to demonstrate that the access mode to a recreation site influences the potential of certain impacts, such as the increase of non-native species, to self-perpetuate from their points of introduction to disjointed sites with a predisposition to disturbance. Due to this propulsion of impacts, the overall spatial extent of roadside impacts was far greater than initially apparent from assessments at the road verge. We discuss possible means of mitigating these impacts. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Comprimento da estaca e tipo de substrato na propagação vegetativa de atroveran Shoot cutting length and substrate types on vegetative propagation of atroveran

    Directory of Open Access Journals (Sweden)

    Larissa Corrêa do Bomfim Costa

    2007-08-01

    Full Text Available A propagação vegetativa de espécies medicinais vem despertando interesse das pesquisas agronômicas, uma vez que se constitui no ponto de partida e em ferramenta básica para qualquer cultivo em escala comercial. Este trabalho objetivou determinar o comprimento de estaca e o tipo de substrato mais adequados para a propagação vegetativa de atroveran. Em condições de casa de vegetação sob nebulização intermitente, foram testados dois comprimentos de estacas (10 e 20cm e três substratos (areia lavada, casca de arroz carbonizada e substrato comercial Plantmax®, em delineamento experimental em blocos casualizados, com quatro repetições e cinco estacas por parcela. Aos trinta e cinco dias, foram avaliados a porcentagem de enraizamento, o comprimento da maior raiz (cm e a biomassa seca das folhas e das raízes (mg. Os resultados indicaram que a propagação vegetativa de atroveran por meio de estaquia é viável, uma vez que o seu enraizamento médio ficou acima de 70%. As mudas de atroveran obtidas de estacas com 20cm apresentaram maior biomassa seca das folhas e das raízes, apesar de o comprimento da estaca não ter afetado a porcentagem de enraizamento e o comprimento da raiz. Os tipos de substrato não proporcionaram efeito sobre o desenvolvimento das estacas de atroveran. Recomenda-se a produção de mudas de atroveran com estacas de 20cm de comprimento, utilizando-se qualquer um dos três substratos testados.The vegetative propagation of medicinal species is in increasing agronomic interest because it is the starting point and a basic tool for any cultivation in commercial scale. The objective of this work was to determine the best shoot cutting length and the best substrate for vegetative propagation of Ocimum selloi. Cuttings were placed in greenhouse conditions under intermittent mist. Two cutting sizes (10 and 20cm and three substrate types (washed sand, carbonized rice hulls and commercial substrate Plantmax® were tested

  16. 26 CFR 1.269B-1 - Stapled foreign corporations.

    Science.gov (United States)

    2010-04-01

    ... foreign corporation within the meaning of paragraph (b)(1) of this section, such foreign corporation will... and a domestic corporation are stapled entities (as provided in paragraph (b) of this section) and... paragraph (c) of this section. (b) Definition of a stapled foreign corporation—(1) General rule. A foreign...

  17. Nutritional survey, staple foods composition and the uses of savoury ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-05-02

    May 2, 2008 ... were greater in the group of women. The most frequently used staple foods are shown in. Table 2, alongside with the content of total proteins, lipids, crude fibres and carbohydrates. All staples foods were based on cereal proteins, predominantly cassava, yam, wheat rice and banana, and thus were charac-.

  18. Food design strategies to increase vegetable intake

    NARCIS (Netherlands)

    Oliviero, Teresa; Fogliano, Vincenzo

    2016-01-01

    Background: Public campaigns promoting consumption of fruits and vegetables had limited results as consumers habits are difficult to modify. The incorporation of fruits and vegetables into regularly eaten products is a food design strategy that leads to several advantages. Pasta is a staple food

  19. Propagação vegetativa de Cordia trichotoma (Vell. Arrab. ex Steudel por estaquia radicular Vegetative propagation of Cordia trichotoma (Vell. Arrab. Ex Steudel from root cuttings

    Directory of Open Access Journals (Sweden)

    Paula Kielse

    2013-02-01

    Full Text Available Louro-pardo (Cordia trichotoma (Vell. Arrab. ex Steudel é espécie arbórea que possui raízes gemíferas, nas quais, após a ocorrência de distúrbios de origem natural ou antrópica, ocorre a formação de brotos. Nessa espécie, ao considerar a habilidade natural de regeneração pelo sistema radicular, presume-se que esses propágulos constituem material com elevado potencial morfogenético. O objetivo deste trabalho foi avaliar a propagação vegetativa de louro-pardo por estaquia radicular. No primeiro experimento, raízes de mudas de louro-pardo foram seccionadas em estacas com 5,0 cm de comprimento, classificadas quanto ao diâmetro em grossas (1,6 - 2,5 cm e finas (1,0 - 1,5 cm e tratadas em solução de 0, 10, 20 e 30 mM de AIB, por 10 seg. No segundo experimento, os propágulos foram classificados quanto à posição de coleta na raiz das mudas em basais, medianas e apicais, seccionadas em estacas de 1,0; 3,0 e 5,0 cm de comprimento e tratadas em solução de 30 mM de AIB. O uso de AIB favoreceu o enraizamento das estacas radiculares, com maiores respostas nos tratamentos com a dose de 30 mM. Estacas radiculares com maior diâmetro mostraram-se mais aptas à brotação quando comparadas com as estacas radiculares menos espessas. As melhores respostas de brotação e enraizamento ocorreram em estacas radiculares basais e medianas com 3,0 e 5,0 cm de comprimento. Portanto, é possível realizar a propagação vegetativa de louro-pardo pela técnica de estaquia radicular.Cordia trichotoma (Vell. Arrab. ex Steudel is a tree species that has roots with buds and, after the occurrence of natural or anthropic disturbances, sprouts develop from these buds. Considering the natural ability of regeneration by root system, it is assumed that these propagules contain tissues with high morphogenetic potential. The objective of this study was to evaluate the vegetative propagation of C. trichotoma root cuttings. In the first experiment, seedling

  20. Trichobezoar obstruction after stapled jejunal anastomosis in a dog.

    Science.gov (United States)

    Carobbi, Barbara; Foale, Robert D; White, Richard A S

    2009-04-01

    To describe an unusual long-term complication of circular end-to-end anastomosis (CEEA) stapling in a dog. Clinical case report. An 11-year-old, female neutered, Labrador Retriever. The dog was referred for clinical signs of bowel obstruction. An enterectomy was performed 2 years before presentation using a CEEA stapling device. Palpation, plain radiographs, and ultrasound of the abdomen confirmed the presence of a mass in the bowel, causing obstruction, and requiring surgical approach. An exploratory celiotomy revealed a 5 cm mass in the jejunum, involving the site of the previous surgery. The mass was removed by enterectomy. Dissection of the mass revealed the presence of many staples at the previous enterectomy site, and a trichobezoar entangled in the exposed parts of the staples. An enterectomy was required to treat an intestinal obstruction caused by a trichobezoar entangled in a CEEA-stapled anastomosis. Development of trichobezoar and subsequent bowel obstruction should be considered an unusual but potential long-term complication of CEEA-stapled anastomosis.

  1. Propagação vegetativa de cedo-australiano (Toona ciliata M. Roemer por miniestaquia Vegetative propagation of Toona ciliata M. Roemer by the minicutting technique

    Directory of Open Access Journals (Sweden)

    Jonicélia Cristina Araújo Vieira de Souza

    2009-04-01

    Full Text Available O método de propagação usual do cedro-australiano (Toona ciliata é via seminal, entretanto a oferta sazonal das sementes e sua curta viabilidade ao longo do tempo representam um problema para a produção contínua de mudas destinadas à implantação de povoamentos. Este trabalho foi conduzido com o objetivo de avaliar a viabilidade da propagação vegetativa da espécie por miniestaquia e a necessidade da aplicação de acido indolbutírico (AIB para o enraizamento das miniestacas. A partir de um banco de estacas de origem seminal, foram obtidas brotações para produção de mudas clonais, em três diferentes épocas de coleta (2,5; 4,5; e 5,5 meses após a recepa das mudas. Antes do estaqueamento, as miniestacas tiveram suas bases imersas em quatro concentrações de AIB (0; 1.500; 3.000; e 4.500 mg L-1. Durante o experimento, obtiveram-se 100% de sobrevivência das minicepas e das miniestacas. Houve 100% de enraizamento das miniestacas nas três coletas, não ocorrendo diferença no comprimento de raízes em função das doses de auxina aplicadas. Quanto maior o intervalo entre as coletas e quanto maiores as brotações que originaram as miniestacas, maior a velocidade de crescimento das mudas. Miniestacas de cedro-australiano possuem capacidade de enraizamento, e mudas recepadas apresentam brotação, possibilitando a clonagem da espécie pelo processo de miniestaquia.Sexual propagation is the method commonly used for the Australian Red Cedar Toona ciliata. However, seasonal seed availability and short viability are a concern for the continuous offer of seeds for implantation. The objectives of this study were to evaluate the viability of vegetative propagation of this species through minicutting and to test indolbutiric acid (IBA application for rooting of minicuttings. Sprouts for clonal minicutting production were obtained from a miniclonal garden established from seeds, in three different harvest times (2.5; 4.5 and 5.5 months

  2. Effect of Low pH and Aluminum Toxicity on the Photosynthetic Characteristics of Different Fast-Growing Eucalyptus Vegetatively Propagated Clones

    Science.gov (United States)

    Yang, Mei; Tan, Ling; Xu, Yuanyuan; Zhao, Yihui; Cheng, Fei; Ye, Shaoming; Jiang, Weixin

    2015-01-01

    Knowing how acid soils and aluminum in soils may limit the growth of Eucalyptus trees in plantations is important because these plantations grow in many tropical and subtropical regions. Seedlings of four vegetatively propagated Eucalyptus clones, E. grandis × E. urophylla ‘GLGU9’(G9), E. grandis × E. urophylla ‘GLGU12’ (G12), E. urophylla × E. camaldulensis ‘GLUC3’ (G3) and E. urophylla ‘GLU4’(G4), were subjected to liquid culture with Hoagland nutrient solution for 40 days, then treated with four different treatments of acid and aluminum for 1 day. The four treatments used either pH 3.0 or 4.0 with or without added aluminum (4.4 mM) in all possible combinations; a control used no added aluminum at pH 4.8. Subsequently, the photosynthetic parameters and morphology of leaves from eucalypt seedlings were determined and observed. The results showed that the tested chlorophyll content, net photosynthetic rate, transpiration rate and water use efficiency were apparently inhibited by aluminum. Under uniform Al concentration (4.4 mM), the Al-induced limitation to photosynthetic parameters increased with pH, indicating acid stimulation to Al toxicity. Among all treatments, the most significant reduction was found in the combination of pH 3.0 and 4.4 mM Al. The photosynthetic and transpiration rates showed similar trends with G9 > G12 > G3 > G4, suggesting that G9 and G12 had higher Al-tolerance than other two clones. Microscopic observation revealed changes in leaf morphology when exposed to Al stress; for example, a reduced thickness of leaf epidermis and palisade tissue, the descendant palisade tissue/spongy tissue ratio and leaf tissue looseness. Overall, the acid and aluminum stress exerted negative effects on the photosynthetic activity of eucalypt seedlings, but the differences in tolerance to Al toxicity between the clones were favorable, offering potential to improve Eucalyptus plantation productivity by selecting Al tolerant clones. PMID

  3. Evolution of staples and clips for vascular anastomoses.

    Science.gov (United States)

    Zeebregts, Clark J; Kirsch, Wolff M; van den Dungen, Jan J; van Schilfgaarde, Reinout; Zhu, Yong H

    2004-01-01

    Because of the development of less invasive surgical techniques, there is an increasing demand for vascular anastomosing techniques that require less exposure of the operating field. This paper reviews the most important representatives of staples, clips, and other mechanical devices for vascular anastomosing described over the last five decades. This report is organized in three parts: (1) the history of clipping and stapling devices, (2) development of the Vessel Closure System (VCS) clips, and (3) current and potential status of mechanical vascular anastomotic devices. A Medline literature search was conducted and publications on the use of staples and/or clips for the creation of vascular anastomoses identified with extensive cross-referencing. The first literature description of a mechanical vascular stapling device was by Gudov in 1950. This and other reports from the Soviet Union stimulated brisk, competitive development of vascular anastomotic devices in Europe, North America, and Japan. Fasteners included staples, penetrating pin-rings, or toothed stainless steel clips, none of which gained acceptance because of their complexity and inability to facilitate end-to-side anastomoses. A more convenient and less traumatic anastomotic system (VCS Clip applier system) was introduced into clinical practice in 1995. This system differs from staples in that it is non-penetrating. A wide variety of reports have described the advantages, both technical and biological, that clips provide over conventional needle-and-suture, particularly for the construction of vascular access for hemodialysis. A steady evolution of mechanical vascular anastomotic devices has sought to eliminate the technical and biological disadvantages of conventional suturing. Although the conventional hand-sewn, overcast non-absorbable suture remains the "gold" standard, newer techniques such as the non-penetrating arcuate-legged VCS clips are gaining acceptance as a useful addition to the vascular

  4. Buttressing staples with cholecyst-derived extracellular matrix (CEM) reinforces staple lines in an ex vivo peristaltic inflation model.

    LENUS (Irish Health Repository)

    Burugapalli, Krishna

    2008-11-01

    Staple line leakage and bleeding are the most common problems associated with the use of surgical staplers for gastrointestinal resection and anastomotic procedures. These complications can be reduced by reinforcing the staple lines with buttressing materials. The current study reports the potential use of cholecyst-derived extracellular matrix (CEM) in non-crosslinked (NCEM) and crosslinked (XCEM) forms, and compares their mechanical performance with clinically available buttress materials [small intestinal submucosa (SIS) and bovine pericardium (BP)] in an ex vivo small intestine model.

  5. Output response of staple food crops in Nigerian agriculture (1990 ...

    African Journals Online (AJOL)

    In the regression results, labour, fertilizer and land area cultivated were significant at various levels. However, land had a negative coefficient. The study recommended that the subsidy on fertilizer should be sustained in other to obtain the needed output from these staple crops. Educating farmers on the right use of fertilizer ...

  6. Pricing of Staple Foods at Supermarkets versus Small Food Stores.

    Science.gov (United States)

    Caspi, Caitlin E; Pelletier, Jennifer E; Harnack, Lisa J; Erickson, Darin J; Lenk, Kathleen; Laska, Melissa N

    2017-08-15

    Prices affect food purchase decisions, particularly in lower-income communities, where access to a range of food retailers (including supermarkets) is limited. The aim of this study was to examine differences in staple food pricing between small urban food stores and the closest supermarkets, as well as whether pricing differentials varied based on proximity between small stores and larger retailers. In 2014, prices were measured for 15 staple foods during store visits in 140 smaller stores (corner stores, gas-marts, dollar stores, and pharmacies) in Minneapolis/St. Paul, MN and their closest supermarket. Mixed models controlling for store type were used to estimate the average price differential between: (a) smaller stores and supermarkets; (b) isolated smaller stores (>1 mile to closest supermarket) and non-isolated smaller stores; and (c) isolated smaller stores inside versus outside USDA-identified food deserts. On average, all items except white bread were 10-54% more expensive in smaller stores than in supermarkets (p stores compared with non-isolated stores for most items. Among isolated stores, there were no price differences inside versus outside food deserts. We conclude that smaller food stores have higher prices for most staple foods compared to their closest supermarket, regardless of proximity. More research is needed to examine staple food prices in different retail spaces.

  7. Mineral Elements Content of some Coarse Grains used as staple ...

    African Journals Online (AJOL)

    In comparison with Recommended Dietary Allowances of essential and trace metals set by international standard organizations, the coarse grains analyzed in this work contribute little to the provision of essential and trace elements requirements. Keywords: Mineral Elements, Coarse Grains, Staple Food, Kano, Nigeria.

  8. Effect of regular consumption of provitamin a biofortified staple crops ...

    African Journals Online (AJOL)

    Biofortification of staple crops with provitamin A (PVA) carotenoids is an innovative strategy for controlling vitamin A (VA) deficiency in low-income countries (LIC). Plant breeding programs have been successful in developing biofortified varieties of cassava, maize, and orange-fleshed sweet potatoes that contain amounts of ...

  9. Nutritional survey, staple foods composition and the uses of savoury ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-05-02

    May 2, 2008 ... Nutritional survey, staple foods composition and the uses of savoury condiments in Douala, Cameroon ... Composition Tables of Cameroon. The secondary aims were to, (A) document the use and .... Potato, tomato, green herbs, ail, carrot, pepper, salt Soft pieces. <18,5 (underw eight). [18,5-24,9[ (Healthy).

  10. Factors Affecting Adoption of Long Staple Cotton Variety among ...

    African Journals Online (AJOL)

    The changing requirements of the international cotton market have created the need for continual investment in new technological innovations in developing countries. The main objective of this research was to identify factors that affect the adoption of Long Staple (LS9219) variety among smallholder cotton farmers in ...

  11. Reverse Transrectal Stapling Technique Using the EEA Stapler: An ...

    African Journals Online (AJOL)

    The usual technique involves securing the anvil at distal end of the proximal colon within a purse string suture [Figure 1]. A sizer is used to predetermine the size of the EEA stapler to be used. The instrument is introduced transanally until it reaches the tip of the rectal stump, previously closed with a linearly stapled line, and ...

  12. Trace Metal Levels in Raw and Heat Processed Nigerian Staple ...

    African Journals Online (AJOL)

    The levels of some trace metals (Fe, Zn, Cu, Ni, Cd) were quantitatively determined in raw and heat processed staple food cultivars (yam, cassava, cocoyam and maize) from oil producing areas of part of the Niger Delta and compared with a non-oil producing area of Ebonyi State as control. The survey was conducted to ...

  13. Outcome of hemiepiphyseal stapling for late-onset tibia vara.

    Science.gov (United States)

    Park, Soo-Sung; Gordon, J Eric; Luhmann, Scott J; Dobbs, Matthew B; Schoenecker, Perry L

    2005-10-01

    The results of hemiepiphysiodesis for the treatment of late-onset tibia vara have been reported to be favorable, but the technique requires careful timing and an accurate estimation of skeletal age. Hemiepiphyseal stapling does not require a careful estimation of skeletal age, and it has been reported to yield good results with low morbidity. However, we are not aware of any study evaluating the intermediate-term radiographic results or complications of this procedure. Twenty-six patients with thirty-three extremities with late-onset tibia vara were treated with proximal tibial hemiepiphyseal stapling. Fourteen extremities had substantial concomitant distal femoral varus and also had hemiepiphyseal stapling of the distal part of the femur. Eighteen patients (twenty-three involved extremities) had juvenileonset tibia vara and eight patients (ten involved extremities) had adolescent-onset tibia vara. The mean age at the time of stapling was 11.8 years. The mean duration of follow-up was 3.8 years. We reviewed standardized standing radiographs to determine the mechanical axis deviation, the medial proximal tibial angle, the lateral distal femoral angle, and the zone of the knee through which the mechanical axis passed. The mean mechanical axis deviation improved from 58 mm (range, 27 to 157 mm) preoperatively to 22 mm (range, -33 to 117 mm) at the time of the last follow-up, and the mean medial proximal tibial angle improved from 77 degrees (range, 50 degrees to 85 degrees ) to 85 degrees (range, 48 degrees to 95 degrees ). In the fourteen lower extremities in which distal femoral hemiepiphyseal stapling was performed, the mean lateral distal femoral angle improved from 96 degrees (range, 92 degrees to 100 degrees ) to 86 degrees (range, 79 degrees to 97 degrees ). At the time of the final follow-up, seven extremities were considered to be in moderate varus; four, in mild varus; twenty, in normal alignment; and two, in valgus. No differences in radiographic outcome

  14. Comparison between grafting and cutting as vegetative propagation methods for conilon coffee plants - doi: 10.4025/actasciagron.v35i4.16917

    Directory of Open Access Journals (Sweden)

    Saul de Andrade Júnior

    2013-05-01

    Full Text Available The purpose of this study was to assess the growth of conilon coffee tree plantlets that were propagated by grafting and cutting. The experiment was conducted at the plantlet production site of Incaper’s Experimental Farm in the city of Marilândia, Espírito Santo State. For grafting, plantlets derived from the seed propagation of Coffea canephora cv. Robusta Tropical (ENCAPER 8151 were used as rootstocks, and six clones of cv. Conilon Vitória (INCAPER 8142 were used as the grafts. The cutting was performed with six clones that were used for grafting. The experimental design consisted of randomized blocks of twelve treatments with five repetitions composed of twelve plantlets. On the hundred and fifth day, the averages of the variables were assessed and compared by the Scheffé test at a probability of 5%. The grafted plantlets were superior for almost all of the characteristics assessed, which suggests that it is possible to propagate conilon coffee trees.

  15. The growing importance of staple foods and condiments used as ingredients in the food industry and implications for large-scale food fortification programs in Southeast Asia.

    Science.gov (United States)

    Spohrer, Rebecca; Larson, Melanie; Maurin, Clémence; Laillou, Arnaud; Capanzana, Mario; Garrett, Greg S

    2013-06-01

    Food fortification is a viable strategy to improve the nutritional status of populations. In Southeast Asia, recent growth and consolidation of the food industry provides an opportunity to explore whether certain widely consumed processed foods could contribute to micronutrient status if they are made with adequately fortified staples and condiments. To estimate the potential contribution certain processed foods can make to micronutrient intake in Southeast Asia if they are made with fortified staples and condiments; e.g., via the inclusion of iodized salt in various processed foods in the Philippines, fortified wheat flour in instant noodles in Indonesia, and fortified vegetable oil in biscuits in Vietnam. For Indonesia, the Philippines, and Vietnam, a review of consumption trends, relevant policies, and industry practices was conducted using publicly available sources,food industry market data and research reports, and oral communication. These informed the estimates of the proportion of the Recommended Nutrient Intake (RNI) that could be delivered via select processed foods. In the Philippines, Indonesia, and Vietnam, the processed food industry is not always required to use fortified staples and condiments. In the Philippines, dried salted fish with iodized salt would provide 64% to 85% of the iodine RNI for women of reproductive age and 107% to 141% of the iodine RNI for children 1 to 6 years of age. In Indonesia, a 75-g pack of instant noodles (a highly consumed product) with fortified wheat flour would provide 45% to 51% of the iron RNI for children 4 to 6 years of age and 10% to 11% of the iron RNI for women of reproductive age. In Vietnam, biscuits containing vegetable oil are increasingly popular. One 35-g biscuit serving with fortified vegetable oil would provide 13% to 18% of the vitamin A RNI for children 4 to 6 years of age and 12% to 17% of the vitamin A RNI for women of reproductive age. Ensuring that fortified staples and condiments such as flour

  16. A Technique to Propagate Clitoria fragrans from Xylopodia

    Science.gov (United States)

    2015-03-01

    determine whether C. fragrans can be propagated vegetatively from xylopodia and whether growth hormones can enhance propagation suc- cess. This... vegetatively from xylopodia and whether growth hormones can enhance propagation success. This information could be used to maintain population viability in the...4 Tables 1 By hormone treatment, the number of lateral

  17. How I do it: the stapled ileal J pouch at restorative proctocolectomy.

    LENUS (Irish Health Repository)

    Martin, S T

    2011-12-01

    Ileal pouch-anal anastomosis (IPAA) following proctocolectomy is the preferred option for patients with medically refractory ulcerative colitis, indeterminate colitis, and familial adenomatous polyposis. However, it remains a procedure associated with morbidity and mortality. Pelvic sepsis, pouch fistulae, and anastomotic dehiscence predispose to pouch failure. We report our experience with an adaptation for the formation of the stapled ileal J pouch using the GIA™ 100 stapling device (Covidien, Mansfield, Massachusetts, USA). When creating the J pouch, we remove the bevelled plastic protector from the thin fork of the stapling device, allowing the staple line to be completed to the tip of the stapled efferent limb of the pouch, thereby minimizing potential blind ending in the efferent limb and injury to the transverse staple line.

  18. Ex vivo pneumostasis evaluation of a variable-height staple design.

    Science.gov (United States)

    Contini, Elizabeth; Godek, Marisha L; Whiffen, Jennifer M; Bronson, Dwight G

    2013-01-01

    This study examined the effect of using a variable-height staple construct containing three rows of staples with heights of 3.0, 3.5, and 4.0 mm (staple leg length, medial to lateral) versus standard three-row single-height staplers (with staple heights of either 3.5 or 4.8 mm) for pneumostasis in healthy porcine and canine lung parenchyma to determine whether a single stapler that uses variable staple heights could perform as well as, or better than, existing single-height stapling devices. The work presented here used healthy animal tissues, in lieu of diseased tissue, which is extremely difficult to obtain and quantify. Briefly, fresh explanted porcine and canine trachea-lung blocs were used for all testing. Tissue thicknesses were measured with a custom-design spring-loaded caliper before stapling with control and test articles to ensure that the tissue was of "appropriate" thickness for the stapler size (staple height) selected (per manufacturer's instructions for use). All tissue measurements were comparable across each area of lung tested, and both test and control devices were fired into the same tissue thicknesses. After stapling, the lungs were submerged in water, insufflated, checked for air leaks at four discrete (increasing) pressures, and scored using a predetermined scale. Statistical analysis was performed for n = 26 (3.5-mm staples), n = 29 (4.8-mm staples), and n = 26 or 29 (paired to the standard group) for the variable-height stapler (3.0-, 3.5-, and 4.0-mm staples). The results demonstrated that the test article comprising three rows of variable-height staples provided comparable pneumostasis with the standard three-row single-height staplers (with staple heights of either 3.5 or 4.8 mm) under the test conditions described. A novel test article containing three rows of staples with heights of 3.0, 3.5, and 4.0 mm (variable-height stapler) showed promising results when compared with standard commercially available single-height staplers

  19. Improving the side-to-side stapled anastomosis: comparison of staplers for robust crotch formation.

    Science.gov (United States)

    Kimura, Masahiro; Kuwabara, Yoshiyuki; Taniwaki, Satoshi; Mitsui, Akira; Shibata, Yasuyuki; Ueno, Shuhei

    2018-01-01

    Few studies have investigated the burst pressure of side-to-side anastomoses comparing different stapling devices that are commercially available. We conducted side-to-side anastomoses with a variety of staplers and compared burst pressure in the crotch of the anastomoses. Nagoya City East Medical Center. We conducted side-to-side anastomoses with 9 staplers with different shapes and forms. Fresh pig small intestines were used. A side-to-side anastomosis was performed between 2 intestine specimens using a linear stapler. The burst pressure of the anastomosis was recorded. In total, 45 staplers were used for this experiment. The site of leakage in all cases was the crotch. Regarding the influence of the number of staple rows, the burst pressure in 3-row staplers was significantly higher than in 2-row staplers. With regard to the relationship between staple height and burst pressure, staples with a height slightly shorter than the intestinal thickness showed the highest burst pressure. In a comparison of staplers with uniform staple heights and stamplers with staples of 3 different heights, the latter had significantly lower burst pressures. Neoveil significantly increased the burst pressure in the crotch and contributed to the highest burst pressure of all the staplers used in this experiment. In this experiment, we defined the important factors that influence burst pressure at the crotch of a stapled, side-to-side anastomosis. These factors include the number of staple rows, the height of the staple compared with the thickness of the tissue, uniformity of staple height, and reinforcement of the staple line. In any surgical case requiring intestinal anastomosis, selection of a stapler is a critical step. Copyright © 2017 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

  20. Availability and consumption of fruits and vegetables in nine regions ...

    African Journals Online (AJOL)

    Bernt Lindtjorn

    Analysis of beta carotene contents indicated that kale and carrots contain high amounts (>4000µg/100gm), spinach, mango and papaya contain moderate amounts (500-800µg/100gm), while staple foods contain no or negligible amounts. Conclusions: Cultivation and consumption of vegetables and fruits is extremely ...

  1. Propagação vegetativa de jambeiro vermelho [Syzygium malaccense (L. Merr. & L.M. Perry] Vegetative propagation of malay apple [Syzygium malaccense (L. Merr. & L.M. Perry

    Directory of Open Access Journals (Sweden)

    Eduardo José de Almeida

    2010-12-01

    Full Text Available O jambeiro vermelho [Syzygium malaccense (L. Merr. & L.M. Perry] se apresenta como opção ao fruticultor por apresentar frutos atrativos e bem aceitos pelo consumidor. A dificuldade de cultivo dessa espécie reside no fato de que a planta possui um porte demasiadamente alto e longo período juvenil quando propagada por semente, com isso, é desejável sua multiplicação vegetativa visando a antecipar o período produtivo e diminuir seu porte. Foi estudada a possibilidade de clonagem dessa espécie pelas técnicas de estaquia, alporquia e enxertia. No experimento por estaquia, testaram-se três doses de ácido indolbutírico (AIB (0, 1.000 3.000 e 5.000 mg L-1 em dois comprimentos de estacas herbáceas (15 e 25 cm. No experimento de alporquia, avaliaram-se duas épocas de realização do alporque (verão e outono e quatro doses de AIB (0, 1.000, 4.000, 7.000 e 10.000 mg kg-1. Na enxertia, analisou-se a compatibilidade do jambeiro vermelho (S. malaccense sobre o jambeiro rosa [Syzygium jambos (L. Alston] com dois diâmetros de porta-enxertos (0,5 e 0,8 cm em duas épocas (inverno e verão, pelo método de enxertia de topo em fenda cheia. A estaquia obteve até 20% de enraizamento, independentemente da dose de AIB, exceto na dose de 5.000 mg L-1, que apresentou efeito negativo ao enraizamento entre estacas de 15 cm; não houve sucesso para alporquia e enxertia, nas condições estudadas.The Malay Apple [Syzygium malaccense (L. Merr. & L.M. Perry] is an option for the producer as its fruits are attractive and well accepted by the consumer. The difficulty of culture of this species is that the plant is very tall and has a long juvenile period when propagated by seed, making its vegetative propagation necessary to anticipate the productive period and decrease its size. The possibility of vegetative propagation of this species was studied by cutting, layering, and grafting. In the cutting experiment, three doses of indolbutyric acid (IBA (0, 1,000, 3

  2. Estimating A Reference Standard Segmentation With Spatially Varying Performance Parameters: Local MAP STAPLE

    Science.gov (United States)

    Commowick, Olivier; Akhondi-Asl, Alireza; Warfield, Simon K.

    2012-01-01

    We present a new algorithm, called local MAP STAPLE, to estimate from a set of multi-label segmentations both a reference standard segmentation and spatially varying performance parameters. It is based on a sliding window technique to estimate the segmentation and the segmentation performance parameters for each input segmentation. In order to allow for optimal fusion from the small amount of data in each local region, and to account for the possibility of labels not being observed in a local region of some (or all) input segmentations, we introduce prior probabilities for the local performance parameters through a new Maximum A Posteriori formulation of STAPLE. Further, we propose an expression to compute confidence intervals in the estimated local performance parameters. We carried out several experiments with local MAP STAPLE to characterize its performance and value for local segmentation evaluation. First, with simulated segmentations with known reference standard segmentation and spatially varying performance, we show that local MAP STAPLE performs better than both STAPLE and majority voting. Then we present evaluations with data sets from clinical applications. These experiments demonstrate that spatial adaptivity in segmentation performance is an important property to capture. We compared the local MAP STAPLE segmentations to STAPLE, and to previously published fusion techniques and demonstrate the superiority of local MAP STAPLE over other state-of-the- art algorithms. PMID:22562727

  3. A Cautionary Analysis of STAPLE Using Direct Inference of Segmentation Truth

    DEFF Research Database (Denmark)

    Van Leemput, Koen; Sabuncu, Mert R.

    2014-01-01

    regions are included in the model, STAPLE devolves into thresholding the average of the input segmentations. We further show that when the number of raters is small, the STAPLE result may not be the optimal segmentation truth estimate, and its model parameter estimates might not reflect the individual...

  4. Reflux of a staple after kock pouch urinary diversion: a nidus for renal stone formation.

    Science.gov (United States)

    Gronau, Eckart; Pannek, Juergen

    2004-06-01

    A patient with cystectomy and urinary diversion after spinal cord injury had multiple pouch concretements and a kidney stone formed around a staple that apparently had refluxed from the nipple of the pouch. In such cases, the stone and staple should be removed at the same time, either percutaneously or by ureterorenoscopy.

  5. 7 CFR 28.303 - Standards for length of staple for American upland cotton.

    Science.gov (United States)

    2010-01-01

    ... cotton. 28.303 Section 28.303 Agriculture Regulations of the Department of Agriculture AGRICULTURAL... STANDARDS AND STANDARD CONTAINER REGULATIONS COTTON CLASSING, TESTING, AND STANDARDS Standards Official Cotton Standards of the United States for Length of Staple § 28.303 Standards for length of staple for...

  6. Glued versus stapled anastomosis of the colon: An experimental study to determine comparative resistance to intraluminal pressure

    Directory of Open Access Journals (Sweden)

    Jiri Paral

    2014-07-01

    Conclusion: Healing with absorbable synthetic glue was as good as with staples. Glued anastomoses resisted pressures that were statistically significantly higher than physiological intraluminal colon pressures but lower than stapled ones.

  7. Complications of staple line and anastomoses following laparoscopic bariatric surgery

    Science.gov (United States)

    Silecchia, Gianfranco; Iossa, Angelo

    2018-01-01

    With over 600 million people being obese, and given the scientific demonstration of the advantages of surgical treatment, bariatric surgery is on the rise. The promising long-term results in terms of weight loss, and particularly in relation to comorbidities and the control/cure rate, mean that the number of procedures performed in all countries remains high. However, the risk of potentially complex or fatal complications, though small, is present and is related to the procedures per se. This review is a guide for bariatric and/or general surgeons, offering a complete overview of the pathogenesis of anastomosis and staple line following the most common laparoscopic bariatric procedures: sleeve gastrectomy, gastric bypass, and mini-gastric bypass. The review is divided according to the procedure and the complications (leak, bleeding and stenosis), and evaluates all the factors that can potentially improve or worsen the complication rate, representing a “unicum” in the present literature on bariatric surgery. PMID:29333067

  8. Glycemic index of some local staples in Ghana.

    Science.gov (United States)

    Eli-Cophie, Divine; Agbenorhevi, Jacob K; Annan, Reginald A

    2017-01-01

    Glycemic index (GI), a measure of blood glucose level as influenced by foods has become a concern due to the increasing cases of diabetes in Ghana. In spite of this, little is known of the GI of commonly consumed carbohydrate-rich foods of the Ghanaian diet. The GI of five Ghanaian staples: fufu (locally pounded), kenkey (Ga), banku, Tuo Zaafi (TZ), and fufu (Processed powder) were determined in a crossover trial among 10 healthy nondiabetics. Participants were given 50 g portions of pure glucose on two different occasions and subsequently the test foods containing 50 g available carbohydrates. Capillary blood glucose levels of the subjects at fasting and after ingestion of the glucose and test foods were measured within a 2-hour period. The GI of the test foods were calculated by dividing the incremental area under the glucose response curve (IAUC) of the test food by the IAUC for the reference food and multiplying the result by 100. Processed-powdered fufu had the least glycemic response (31), followed by Ga kenkey (41) and locally pounded fufu (55), all recording low GI. Tuo Zaafi (68) had a medium GI and banku (73), moderately high GI. Comparison of GI between the foods using ANOVA revealed a significant difference between GIs of locally pounded fufu versus I-fufu (industrially processed fufu flour) (p = 0.026). This study showed that the five major Ghanaian staples showed low to moderately high GI. These should be considered in recommendations for diabetics.

  9. [Stapled hemorrhoidopexy in the treatment of hemorroidal prolapse].

    Science.gov (United States)

    Conzo, G; Buffardi, R; Brancaccio, U; Astarita, G; Palazzo, A; Esposito, M G; Celsi, S

    2004-01-01

    In the treatment of hemorroidal prolapse, stapled hemorrhoidopexy, according to the Longo's technique, represents an innovative and interesting procedure. The Authors consider own experience in the years 2001-2002, estimating preliminary results in the treatment of 50 patients affected by hemorrhoidal disease classified as III-IV grade, associated with mucosal prolapse, rectocystocele in 5 cases, anal fissures in 6 and hyperplastic polyp in 1. The patients were submitted to mucosal prolapsectomy with mechanical stapler (PPH 01-33 Ethicon), applying haemostatic stitch on suture line, apart from intraoperative bleeding, associated to closed anal sphincterotomy in 6 cases, and resection of anal hyperplasic polyp in 1. In 5 cases of rectocystocele a Burch's culposuspension was associated to a stapled transanal rectal resection (STARR). After 3 and 12 months the Authors performed ano-rectoscopy, anal manometry and defecography. Mean operative time was 45 minutes (range 20'-130') and mean hospital stay was 3 days (range 2-6 days). In the early postoperative course urinary ritention in 4 cases, treated with temporary catheterization in 3 and permanent for 72 hours in 1, was observed. Only 1 patient, was reoperated in day-surgery and with loco-regional anesthesia for residual fibrous hemorroid. Bleeding, severe pain, anal stenosis, impairment of continence were not observed. According to the Literature data, our experience confirm that mucoprolapsectomy represents an innovative, safe, simple and definitive operation in the treatment of hemorrhoids disease. In case of rectal prolapse associated to external fibrous hemorroids, a combined surgical treatment is requested in order to achieve better results.

  10. Carotenoids in staple cereals: Metabolism, regulation, and genetic manipulation

    Directory of Open Access Journals (Sweden)

    shengnan zhai

    2016-08-01

    Full Text Available Carotenoids play a critical role in animal and human health. Animals and humans are unable to synthesize carotenoids de novo, and therefore rely upon diet as sources of these compounds. However, major staple cereals often contain only small amounts of carotenoids in their grain. Consequently, there is considerable interest in genetic manipulation of carotenoid content in cereal grain. In this review, we focus on carotenoid metabolism and regulation in non-green plant tissues, as well as genetic manipulation in staple cereals such as rice, maize, and wheat. Significant progress has been made in three aspects: (1 seven carotenogenes play vital roles in carotenoid regulation in non-green plant tissues, including DXS (1-deoxyxylulose-5-phosphate synthase influencing isoprenoid precursor supply, PSY (phytoene synthase, LCYB (β-cyclase and LCYE (ε-cyclase controlling biosynthesis, HYDB (1-hydroxy-2-methyl-2-(E-butenyl 4-diphosphate reductase and CCDs (carotenoid cleavage dioxygenases responsible for degradation, and OR (orange conditioning sequestration sink; (2 pro-vitamin A-biofortified crops, such as rice and maize, were developed by either metabolic engineering or marker-assisted breeding; (3 QTLs for carotenoid content on chromosomes 3B, 7A, and 7B were consistently identified, eight carotenogenes including 23 loci were detected, and ten gene-specific markers for carotenoid accumulation were developed and applied in wheat improvement. A comprehensive and deeper understanding of the regulatory mechanisms of carotenoid metabolism in crops will be benefitical in improving our precision in improving carotenoid contents. Genomic selection and gene editing are emerging as transformative technologies for vitamin A biofortification.

  11. Stapled versus handsewn methods for colorectal anastomosis surgery.

    Science.gov (United States)

    Neutzling, Cristiane B; Lustosa, Suzana A S; Proenca, Igor M; da Silva, Edina M K; Matos, Delcio

    2012-02-15

    Previous systematic reviews comparing stapled and handsewn colorectal anastomosis that are available in the medical literature have not shown either technique to be superior. An update of this systematic review was performed to find out if there are any data that properly answer this question. To compare the safety and effectiveness of stapled and handsewn colorectal anastomosis surgery. The following primary hypothesis was tested: the stapled technique is more effective because it decreases the level of complications. A computerized search was performed in the Cochrane Central Register of Controlled Trials (CENTRAL), MEDLINE, EMBASE according to the strategies of the Colorectal Cancer Group of The Cochrane Collaboration. There were no limits upon language, date or other criteria. A revised search strategy was performed for this updated version of the review May 2011. All randomised controlled trials (RCTs) in which stapled and handsewn colorectal anastomosis techniques were compared. Participants were adult patients undergoing elective colorectal anastomosis surgery. The interventions were endoluminal circular stapler and handsewn colorectal anastomosis surgery. Outcomes considered were a) mortality; b) overall anastomotic dehiscence; c) clinical anastomotic dehiscence; d) radiological anastomotic dehiscence; e) stricture; f) anastomotic haemorrhage; g) reoperation; h) wound infection; i) anastomosis duration; and j) hospital stay. Data were independently analysed by the two review authors (CBN, SASL) and cross-checked. The methodological quality of each trial was assessed by the same two authors. After searching the literature for this update, no study was added to those in the previous version of this review. Details of randomizations (generation and concealment), blinding, whether an intention-to-treat analysis was done or not, and the number of patients lost to follow-up were recorded. The analysis of the risk of bias was updated according to the software

  12. A Prospective Randomized Study Comparing Skin Staples and Polypropylene Sutures for Securing the Mesh in Lichtenstein's Repair

    Directory of Open Access Journals (Sweden)

    Pankaj Shivhare

    2014-06-01

    Results: Mesh fixation with skin staples is as effective as conventional sutures with the added advantage of significant reduction in the operating time and complications. Conclusions: The staples can be applied much more quickly than sutures for fixing the mesh, thus saving the operating time. The infection rate is significantly decreased with staples. The staples are not associated with any significant complications or recurrence. [Arch Clin Exp Surg 2014; 3(3.000: 147-152

  13. Vegetative propagation of Alstroemeria hybrids in vitro.

    NARCIS (Netherlands)

    Pierik, R.L.M.; Voorst, van A.; Booy, G.; Acker, van C.A.M.; Lelivelt, C.L.C.; Wit, de J.C.

    1988-01-01

    Terminal and lateral tips from fleshy rhizomes of Alstroemeria hybrids were isolated in vitro and induced to form a new rhizome. The cultivar Toledo was used in most experiments, but later other cultivars were also tested. The basic culture medium for rhizome isolation and for rhizome multiplication

  14. Vegetative propagation of African walnut ( Plukenetia conophora ...

    African Journals Online (AJOL)

    Factorial combinations of age of stem cutting and pre-planting treatment were arranged in completely randomized design (CRD) and replicated three times. Results of analysis of variance (ANOVA) indicated a non-significant main effect of age of stem cutting and pre-planting treatment on number of days to breaking of ...

  15. Propagação vegetativa de genótipos de pitangueira (Eugenia uniflora L. do Sul do Brasil por enxertia de garfagem Vegetative propagation of surinam cherry (Eugenia uniflora L. genotypes from Southern Brazil, through cleft graft

    Directory of Open Access Journals (Sweden)

    Rodrigo Cezar Franzon

    2010-03-01

    . Percentages of grafts with leaf break were between 45.0% and 95% whereas percentages of grafting success in actually obtained the desirable clones were between 40.0% to 87.5%. Percentages above 65.0% for evaluated parameters, leafing and grafting success were obtained in selections "Pit 75", "Pit 61" and "Pit 137". There were differences among genotypes for percentage of cleft grafting success in Surinam cherry propagation. This type of grafting is recommended for Surinam cherry vegetative propagation.

  16. Wave Propagation

    CERN Document Server

    Ferrarese, Giorgio

    2011-01-01

    Lectures: A. Jeffrey: Lectures on nonlinear wave propagation.- Y. Choquet-Bruhat: Ondes asymptotiques.- G. Boillat: Urti.- Seminars: D. Graffi: Sulla teoria dell'ottica non-lineare.- G. Grioli: Sulla propagazione del calore nei mezzi continui.- T. Manacorda: Onde nei solidi con vincoli interni.- T. Ruggeri: "Entropy principle" and main field for a non linear covariant system.- B. Straughan: Singular surfaces in dipolar materials and possible consequences for continuum mechanics

  17. Local Staple Food Price Indices in the Age of Biofuels

    Science.gov (United States)

    Brown, Molly E.

    2012-01-01

    In many poor, food insecure regions, agriculture is a primary source of income and farmers are reliant both on their own production and on purchasing food in the market to feed their families. Large local food price increases over a short time period can be indicative of a deteriorating food security situation and may be the consequence of weather-related food production declines, Dr can simply be the result of price transmission from the international commodity market. Food price indices developed by the United Nations Food and Agriculture Organization (FAO) are used to monitor food price trends at a global level, but largely reflect supply and demand conditions in export markets far from the places where the chronically food insecure live. A much better understanding of how local staple food prices in isolated regions such as West Africa that grow most of the food they eat to better understand the impact of global commodity market transformations on sensitive communities at the margin. This information will also enable improved strategies for these farmers who are extraordinarily sensitive to climate change impacts on agricultural growing conditions.

  18. Quality of Life after Stapled Hemorrhoidopexy: A Prospective Observational Study

    Directory of Open Access Journals (Sweden)

    Pankaj Kumar Garg

    2013-01-01

    Full Text Available Objective. The objective of the study was to assess the change in quality of life (QOL of patients undergoing stapled hemorrhoidopexy (SH using WHO Quality of Life-BREF (WHOQOL-BREF questionnaire. Methods. The study sample comprised patients with symptomatic II, III, and IV degree hemorrhoids, undergoing SH. The patients were asked to complete WHOQOL-BREF questionnaire before and one month following the surgery. Result. There were 20 patients in the study group. The postoperative pain score measured by visual analogue scale at six hours postoperatively was at 24 hours. The items in the WHOQOL-BREF had high-internal consistency or reliability as shown by high Cronbach's alpha coefficient which was 0.82 and 0.90 for pre- and postoperative questionnaires. There was significant improvement in the overall perception of QOL and health, and in physical and psychological domains. There was modest improvement in environmental domain, while no change was noted in social domain. Conclusion. SH improved the quality of life of patients treated for hemorrhoids.

  19. 76 FR 52935 - Certain Polyester Staple Fiber From Korea: Rescission of Antidumping Duty Administrative Review

    Science.gov (United States)

    2011-08-24

    ... not coated. Polyester staple fiber is generally used as stuffing in sleeping bags, mattresses, ski... CFR 351.305(a)(3). Timely written notification of the return/destruction of APO materials or...

  20. Gastric Wall Thickness and the Choice of Linear Staples in Laparoscopic Sleeve Gastrectomy: Challenging Conventional Concepts.

    Science.gov (United States)

    Abu-Ghanem, Yasmin; Meydan, Chanan; Segev, Lior; Rubin, Moshe; Blumenfeld, Orit; Spivak, Hadar

    2017-03-01

    Little evidence is available on the choice of linear staple reloads in laparoscopic sleeve gastrectomy (LSG). Previous literature recommends matching closed staple height (CSH) to tissue-thickness (TT) to avoid ischemia. Our objective was to examine feasibility and safety of "tight" hemostatic (CSH/TT sleeve ischemia. Stepwise regression analysis revealed that body mass index (P < 0.001), hypertension (P < 0.01), and male gender (P < 0.001) were associated with increased gastric TT. Our study suggests that reloads with CSH/TT <1 in LSG including staples with CSH of 1 mm on body and fundus are safe. The results challenge the concept that tight stapling cause's ischemia. Since tight reloads are designed to improve hemostasis, their application could have clinical benefit.

  1. Stapled Haemorrhoidopexy for Prolapsed Haemorrhoids: Short- and Long-term Experience

    Directory of Open Access Journals (Sweden)

    Davide Lomanto

    2007-01-01

    Conclusion: Our short- and long-term results show that stapled haemorrhoidopexy for haemorrhoids is a safe procedure with less pain and lower complication rate compared to conventional haemorrhoidectomy.

  2. A Route to Scale Up DNA Origami Using DNA Tiles as Folding Staples

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zhao; Yan, Hao; Liu, Yan

    2010-01-26

    A new strategy is presented to scale up DNA origami using multi-helical DNA tiles as folding staples. Atomic force microscopy images demonstrate the two-dimensional structures formed by using this strategy.

  3. Evaluation of Nitinol staples for the Lapidus arthrodesis in a reproducible biomechanical model

    Directory of Open Access Journals (Sweden)

    Nicholas Alexander Russell

    2015-12-01

    Full Text Available While the Lapidus procedure is a widely accepted technique for treatment of hallux valgus, the optimal fixation method to maintain joint stability remains controversial. The purpose of this study was to evaluate the biomechanical properties of new Shape Memory Alloy staples arranged in different configurations in a repeatable 1st Tarsometatarsal arthrodesis model. Ten sawbones models of the whole foot (n=5 per group were reconstructed using a single dorsal staple or two staples in a delta configuration. Each construct was mechanically tested in dorsal four-point bending, medial four-point bending, dorsal three-point bending and plantar cantilever bending with the staples activated at 37°C. The peak load, stiffness and plantar gapping were determined for each test. Pressure sensors were used to measure the contact force and area of the joint footprint in each group. There was a significant (p < 0.05 increase in peak load in the two staple constructs compared to the single staple constructs for all testing modalities. Stiffness also increased significantly in all tests except dorsal four-point bending. Pressure sensor readings showed a significantly higher contact force at time zero and contact area following loading in the two staple constructs (p < 0.05. Both groups completely recovered any plantar gapping following unloading and restored their initial contact footprint. The biomechanical integrity and repeatability of the models was demonstrated with no construct failures due to hardware or model breakdown. Shape memory alloy staples provide fixation with the ability to dynamically apply and maintain compression across a simulated arthrodesis following a range of loading conditions.

  4. Staple Line Reinforcement Methods in Laparoscopic Sleeve Gastrectomy: Comparison of Burst Pressures and Leaks.

    Science.gov (United States)

    Timucin Aydin, M; Aras, Orhan; Karip, Bora; Memisoglu, Kemal

    2015-01-01

    Laparoscopic sleeve gastrectomy is a technically simple and popular bariatric operation with acceptable results. However, leaks can occur in long staple lines, for which various reinforcement methods are used. We compared nonreinforced stapling in laparoscopic sleeve gastrectomy with 3 staple line reinforcement methods: suturing, absorbable buttressing material, and fibrin glue. From March 1 until September 30, 2014, 118 patients with body mass index >40 kg/m(2) underwent sleeve gastrectomy and were enrolled in 4 groups, depending on the type of reinforcement used. The resected stomach specimens were treated with the same methods of reinforcement as used in the surgeries in the corresponding patients and then insufflated until a burst occurred. The burst pressures of the resected stomach specimens and adverse postoperative events were recorded. Five postoperative leaks occurred in the reinforcement groups (fibrin glue, 2; absorbable buttresses, 2; sutures, 1); no leaks were evident in the no-reinforcement group. Suturing afforded the highest burst pressure and took the longest to perform of the methods. There was no correlation between the leaks and burst pressures. All of the leaks occurred in the proximal fundus in the resected stomach specimens and in the affected patients. Although most surgeons use additional reinforcement on long staple lines in sleeve gastrectomy, there is no consensus about its necessity. We did not show any benefit of such reinforcement methods over proper stapling technique alone. Laparoscopic sleeve gastrectomy without staple line reinforcement is safe and avoids additional costs for reinforcement materials.

  5. Surgical staples compared with subcuticular suture for skin closure after cesarean delivery: a randomized controlled trial.

    Science.gov (United States)

    Figueroa, Dana; Jauk, Victoria Chapman; Szychowski, Jeff M; Garner, Rachel; Biggio, Joseph R; Andrews, William W; Hauth, John; Tita, Alan T N

    2013-01-01

    To compare the risk of cesarean wound disruption or infection after closure with surgical staples compared with subcuticular suture. Women with viable pregnancies at 24 weeks of gestation or greater undergoing scheduled or unscheduled cesarean delivery were randomized to wound closure with surgical staples or absorbable suture. Staples were removed at postoperative days 3-4 for low transverse incisions and days 7-10 for vertical incisions. Standardized wound evaluations were performed at discharge (days 3-4) and 4-6 weeks postoperatively. The primary outcome was a composite of wound disruption or infection within 4-6 weeks. Secondary outcomes included operative time, highest pain score on analog scale, cosmesis score, and patient scar satisfaction score. Analyses were by intent to treat. Of 398 patients, 198 were randomized to staples and 200 to suture (but four received staples). Baseline characteristics including body mass index, prior cesarean delivery, labor, and type of skin incision were similar by group. The primary outcome incidence at hospital discharge was 7.1% for staples and 0.5% for suture (Psuture (P=.008, relative risk 2.5, 95% CI 1.2-5.0). Operative time was longer with suture closure (median time of 58 versus 48 minutes; Psuture is associated with significantly increased composite wound morbidity after cesarean delivery. : ClinicalTrials.gov, www.clinicaltrials.gov, NCT01008449. : I.

  6. Polypropylene suture versus skin staples for securing mesh in lichtenstein inguinal hernioplasty.

    Science.gov (United States)

    Khan, Awais Ali; Majeed, Shahid; Shahzadi, Maria; Hussain, Syed Mukarram; Ali, Mujahid Zulfiqar; Siddique, Khalid

    2014-02-01

    To compare polypropylene suture and skin staples for securing mesh in Lichtenstein inguinal hernioplasty in terms of mean operating time and postoperative pain. Randomized clinical trial. Surgical Ward, Combined Military Hospital, Kharian, from August 2011 to February 2012. All individuals fulfilling inclusion criteria underwent elective Lichtenstein inguinal hernioplasty as admitted patients, under spinal anaesthesia and with aseptic measures. In group 1, during the operation, mesh fixation was done with 2/0 polypropylene suture and skin was closed with subcuticular 2/0 polypropylene suture whereas in group 2, the anchorage of mesh was done with skin staples and skin was closed with staples from the same stapler. Mean operative time and postoperative pain, assessed on a visual analog score, were compared between the groups. The overall postoperative pain was lower (p = 0.026) when staples were used to anchor mesh. Moreover, operative time was also lower (37.42 ± 2.69 minutes) in staple group versus (42.44 ± 2.55 minutes in polypropylene group). Mean operating time and postoperative pain is less in securing mesh with skin staples as compared to polypropylene suture in Lichtenstein inguinal hernioplasty.

  7. Vegetative propagation of native species potentially useful in the restoration of México City's vegetation Propagación vegetativa de especies nativas potencialmente útiles en la restauración de la vegetación de la ciudad de México

    Directory of Open Access Journals (Sweden)

    Renato Ramos-Palacios

    2012-09-01

    Full Text Available Hardwood and softwood cuttings of Buddleja cordata HBK, Dodonaea viscosa Jacq and Senecio praecox D.C. were tested to know their ability to form adventitious roots. Cuttings were prepared in 2 different seasons (wet and dry and treated with different microclimatic conditions and auxin concentrations (IBA and NAA. Hardwood and softwood cuttings of B. cordata rooted during the dry and wet season, whilst hardwood and softwood cuttings of D. viscosa rooted only in the wet season, cuttings of S. praecox rooted only in wet season with a higher rooting for hardwood than softwood cuttings. Low hormone concentrations (10 - 100 ppm favored the rooting percentage more than high concentrations (1000 - 10 000 ppm. However, high hormone concentrations favored number, length of roots and number of developed shoots. Natural regeneration of these species is limited and the species are difficult to propagate from seeds. Vegetative propagation of these species could be an alternative to get clonal planting stock for reforestation programs in some Mexico City areas.Se probó la habilidad de estacas lignificadas y suaves de Buddleja cordata HBK, Dodonaea viscosa Jacq y Senecio praecox D.C. para formar raíces adventicias. Las estacas se prepararon en las estaciones húmeda y seca; se trataron con diferentes concentraciones de auxinas (IBA y NAA y en diferentes condiciones microclimáticas. Las estacas de madera lignificadas y madera suave de B. cordata enraizaron durante la estación seca y húmeda, mientras que las de D. viscosa lo hicieron sólo en la época húmeda, las estacas de S. praecox sólo en la estación seca teniendo las estacas lignificadas un mayor enraizamiento que las de madera suave. Las concentraciones bajas de hormonas (10 - 100 ppm favorecieron más el porcentaje de enraizamiento que las altas concentraciones (1000 - 10 000 ppm. . Sin embargo, las concentraciones altas de hormonas favorecieron el número y la longitud de las raíces, además del

  8. Effect of the thickness and nonlinear elasticity of tissue on the success of surgical stapling for laparoscopic liver resection.

    Science.gov (United States)

    Tsukune, Mariko; Kobayashi, Yo; Otsuka, Yuichiro; Maeda, Testuya; Yamazaki, Nozomu; Watanabe, Hiroki; Ando, Takeshi; Kaneko, Hironori; Fujie, Masakatsu G

    2014-01-01

    Recently, the range of applications of surgical staplers has been extended to include laparoscopic liver resection because manipulation of a surgical stapler is very simple. Revealing the causes of stapling failure and suggesting a method to solve stapling failure are important for safe laparoscopic liver resection. Surgeons say that tissues make stapling more likely to fail if they are thick and brittle. However, the combinatorial effect of the thickness and stiffness of tissues on the success of surgical stapling for laparoscopic liver resection has not been investigated. Therefore, the objective of the present study was to investigate the effect of tissue thickness and tissue stiffness on the success rate (SR) of surgical stapling. From ex vivo stapling experimental results using pig livers, it is suggested that the effect of tissue thickness is greater than the effect of tissue stiffness on the SR of stapling. If tissue thickness is 5 mm, the SR of stapling is high regardless of the magnitude of the tissue-stiffness parameter. However, if tissue thickness is >10 mm, the SR of stapling has a relationship with nonlinear viscoelastic parameters. Therefore, the SR of stapling could be predicted from tissue thickness and nonlinear elastic parameters.

  9. Household Coverage of Fortified Staple Food Commodities in Rajasthan, India.

    Directory of Open Access Journals (Sweden)

    Grant J Aaron

    Full Text Available A spatially representative statewide survey was conducted in Rajasthan, India to assess household coverage of atta wheat flour, edible oil, and salt. An even distribution of primary sampling units were selected based on their proximity to centroids on a hexagonal grid laid over the survey area. A sample of n = 18 households from each of m = 252 primary sampling units PSUs was taken. Demographic data on all members of these households were collected, and a broader dataset was collected about a single caregiver and a child in the first 2 years of life. Data were collected on demographic and socioeconomic status; education; housing conditions; recent infant and child mortality; water, sanitation, and hygiene practices; food security; child health; infant and young child feeding practices; maternal dietary diversity; coverage of fortified staples; and maternal and child anthropometry. Data were collected from 4,627 households and the same number of caregiver/child pairs. Atta wheat flour was widely consumed across the state (83%; however, only about 7% of the atta wheat flour was classified as fortifiable, and only about 6% was actually fortified (mostly inadequately. For oil, almost 90% of edible oil consumed by households in the survey was classified as fortifiable, but only about 24% was fortified. For salt, coverage was high, with almost 85% of households using fortified salt and 66% of households using adequately fortified salt. Iodized salt coverage was also high; however, rural and poor population groups were less likely to be reached by the intervention. Voluntary fortification of atta wheat flour and edible oil lacked sufficient industry consolidation to cover significant portions of the population. It is crucial that appropriate delivery channels are utilized to effectively deliver essential micronutrients to at-risk population groups. Government distribution systems are likely the best means to accomplish this goal.

  10. Marker-based estimates reveal significant non-additive effects in clonally propagated cassava (Manihot esculenta): implications for the prediction of total genetic value and the selection of varieties

    Science.gov (United States)

    In clonally propagated crops, non-additive genetic effects can be effectively exploited by the identification of superior genetic individuals as varieties. Cassava (Manihot esculenta Crantz) is a clonally propagated staple food crop that feeds hundreds of millions. We quantified the amount and natur...

  11. Model development for wireless propagation in forested environments

    OpenAIRE

    Zegarra, Jesus

    2015-01-01

    Approved for public release; distribution is unlimited Wireless propagation modeling is a necessary task in the design of countless applications. Wireless signals attenuate at different rates according to the propagation environment. Given that vegetation is an unavoidable feature for most outdoor wireless channels, propagation models in forested environments are in high demand. The characterization of radio waves propagating through foliage is particularly complex due to the random charac...

  12. Propagação vegetativa de Hyptis leucocephala Mart. ex Benth. e Hyptis platanifolia Mart. ex Benth. (Lamiaceae Vegetative propagation of Hyptis leucocephala Mart. ex Benth. and Hyptis platanifolia Mart. ex Benth

    Directory of Open Access Journals (Sweden)

    L.M Oliveira

    2011-01-01

    . The aim of this study was to evaluate the effect of different types of cuttings and different concentrations of indolebutyric acid (IBA on the survival, growth and rooting rates of cuttings from Hyptis leucocephala Mart. ex Benth. and Hyptis platanifolia Mart. ex Benth., species endemic to the semi-arid region of Northeastern Brazil and with largely proven medicinal value. The experiment lasted four months. Apical, middle-apical, middle-basal and basal cuttings were treated with 0, 1000, 2000 and 4000 mg L-1 IBA solutions for 5 min. The use of apical, middle-apical and middle-basal cuttings induced by 2000 and 4000 mg L-1 IBA led to the best results for vegetative propagation of H. leucocephala. For H. platanifolia, the best results were obtained using middle-basal and basal cuttings treated with IBA at 2000 and 4000 mg L-1.

  13. Indolbutyric acid in the vegetative propagation of cajarana plants (Spondias sp.Ácido indolbutírico na propagação vegetativa de cajaraneira (Spondias sp.

    Directory of Open Access Journals (Sweden)

    Mauro da Silva Tosta

    2012-12-01

    Full Text Available The objective of this study was to evaluate the vegetative propagation of cuttings semi-herbaceous of “cajaraneira” (Spondias sp. treated with indolbutyric acid at different concentrations. Cuttings of 20 cm, submitted to the application of six concentrations of indolbutyric acid – IBA (0, 500, 1000, 3000, 6000 and 9000 ppm. The experimental design was randomized blocks, being used with four replications and 12 cuttings per experimental unit, being evaluated 60 days after planting. We evaluated the number of buds, length of bud, leaf number, the number of leaflets, the length of the root system, the percentage of rooting, root number per cutting, leaf dry weight, dry weight sprouting, the dry mass of root system and the relationship between the dry mass of shoot and root dry mass. The increase in IBA concentration promoted a quadratic polynomial for the variables analyzed; except for the relationship between the dry mass of shoots and dry weight of roots, which was observed a decreasing effect with increased doses. For the production of vigorous seedlings cajaraneira by cuttings can be used, on average, a concentration of 5232 ppm IBA, mixed in pharmaceutical talc powder. O objetivo do presente trabalho foi avaliar a propagação vegetativa de estacas semi-herbáceas de cajarana (Spondias sp. tratadas com ácido indolbutírico em diferentes concentrações. Foram utilizadas estacas de 20 cm, submetidas à aplicação de seis concentrações de ácido indolbutírico – AIB (0, 500, 1000, 3000, 6000 e 9000 ppm. O delineamento experimental foi em blocos casualizados, com quatro repetições e 12 estacas por unidade experimental, sendo avaliado aos 60 dias após o plantio. Foi avaliado o número de brotos, o comprimento do broto, o número de folhas, o número de folíolos, o comprimento do sistema radicular, a porcentagem de estacas enraizadas, o número de raízes por estaca, a massa seca da folha, a massa seca da brotação, a massa seca

  14. Vegetative propagation by cuttings of azaléia tree (Rhododendron thomsonii HOOK. f./ Propagação vegetativa de estaquia de azaléia arbórea (Rhododendron Thomsonii HOOK. f.

    Directory of Open Access Journals (Sweden)

    Henrique Soares Koehler

    2006-06-01

    Full Text Available Rhododendron thomsonii (Ericaceae is a chinese ornamental hardwood species. The seeds are used just for hybrids production, therefore, vegetative propagation is an appropriate way for large scale plant production. The rooting potential was evaluated in cuttings collected in spring/2004 from stock plants localized in Curitiba, Paraná. The stem cuttings were produced with 12 cm long, right cut upper and bevel bellow, with two half leaves and treated with sodium hypochlorite for ten minutes and current water for five minutes. The cuttings basis were dipped in IBA treatments (0, 1000, 2000, 4000mgL-1 in alcoholic solutions and talc (0, 1000, 2000, 4000 mgKg-1, totalling eight treatments with four replications of nine cuttings. Mean separation were made using a pair wise design (4X2 in a association between dosage and application ways. The cuttings were planted in vermiculite medium and maintained in greenhouse for 70 days. The evaluation included percentage of rooting, callus cuttings (without root with callus, alive and dead cuttings. No rooting was verified in cuttings collected in this season. The variance analysis showed no interactions between dosage and application ways.Rhododendron thomsonii (Ericaceae é uma espécie lenhosa, ornamental originária da China cujas sementes são utilizadas exclusivamente para produção de híbridos, sendo a propagação vegetativa uma ferramenta viável para a produção de mudas em larga escala. Com a finalidade de avaliar o enraizamento desta espécie para estacas colhidas na primavera (setembro/2004, foram selecionadas plantas-matrizes adultas situadas no Município de Curitiba – PR. As estacas semilenhosas foram obtidas com comprimento aproximado de 12cm, cortadas em bisel na parte inferior e em corte reto na parte superior, com duas folhas reduzidas à metade. O tratamento fitossanitário foi realizado utilizando-se imersão das estacas em hipoclorito de sódio 0,5% (10 minutos seguida de lavagem em

  15. Propagação vegetativa da alfavaca-cravo utilizando diferentes tipos de estacas e substratos Vegetative propagation of the wild basil using different types of cuttings and substrata

    Directory of Open Access Journals (Sweden)

    Polyana Aparecida D. Ehlert

    2004-03-01

    Full Text Available A propagação vegetativa é considerada importante ferramenta para o melhoramento de espécies lenhosas e herbáceas e vem sendo amplamente utilizada, visando melhorar e manter variedades de importância econômica e medicinal. Neste contexto utilizou-se estacas de alfavaca-cravo de 15 cm para apicais e 25 cm para as medianas, sendo estas com e sem folhas. As estacas foram plantadas em bandejas de isopor de 72 células, utilizando-se 10 substratos. Após 35 dias, as estacas foram retiradas com cuidado, sendo as partes aéreas e radiculares separadas e acondicionadas em saco de papel e mantidas em estufa a 70ºC por 48 h para posterior avaliação da matéria seca. Analisou-se a percentagem de enraizamento, número de folhas na estaca, peso de matéria seca de folha e de raiz. Não houve interação significativa entre os diferentes tipos de substrato e estaca para percentagem de enraizamento, sendo que os substratos de modo geral diferiram pouco entre si. Entre os tipos de estaca destacaram-se para esta variável a mediana sem folha e a apical com folha. Para as demais variáveis houve interação significativa entre o tipo de estaca e o substrato. A melhor estaca foi a mediana sem folhas plantadas em substrato arisco + esterco + húmus e vermiculita nas seguintes proporções: 20%:40%:40%; 40%:20%:40% e 40%:40%.The vegetative propagation is an important tool for the improvement of woody and herbaceous species and could be an important tool to improve and to maintain varieties of economic and medicinal importance. In this experiment cuttings 15 cm long of the apical portion and also 25 cm long cuttings of the medial portion of the stems, were used both with and without leaves. The cuttings were planted on styrofoam trays with 72 cells, using 10 different substrata. After 35 days, cuttings were carefully removed, the aerial portion being separated from the roots and conditioned in paper bags and maintained in a stove at 70ºC for 48 h, for the

  16. Ácido indolbutírico em diferentes diâmetros na estaquia de Luehea divaricata Indolbutyric acid in different diameters on the vegetative propagation of Luehea divaricata

    Directory of Open Access Journals (Sweden)

    Jardel Pizzatto Pacheco

    2008-09-01

    bifactorial combinations with 12 units per repetition and five repetitions per treatment. 90 days after the implantation of the experiment the following variables were evaluated: survival, rooting, number and length of the roots. Thick and medium stem cuttings immersed in 5000mg L-1 of hidroalcolic solution of IBA are indicated in the vegetative propagation of Luehea divaricata.

  17. Biomechanical comparison of a new staple technique with tension band wiring for transverse patella fractures.

    Science.gov (United States)

    Schnabel, Bernd; Scharf, Martin; Schwieger, Karsten; Windolf, Markus; Pol, Bas van der; Braunstein, Volker; Appelt, Andreas

    2009-12-01

    The tension band wiring technique is the most common method of transverse patella fracture fixation. Since post-operative instabilities have been reported for this technique, alternative osteosynthesis solutions are of interest. We investigated the biomechanical behaviour of a new staple technique for treatment of transverse patella fractures in a cadaveric model. Eight human cadaveric knees with femur and tibia including soft tissue were used. A transverse osteotomy of the patella was created. Each specimen was fixed consecutively with tension band wiring and two Nitinol compression staples. Testing was performed by pull on the quadriceps tendon between a 90 degrees flexed position and full knee extension for up to 5,000 cycles. At 1,000 cycles, fracture site displacements in flexion and extension were significantly smaller for the staple group at the ventral aspect of the patella as compared to the tension band wiring group. With a failure criterion of 2mm fracture site displacement, cycles until failure were significantly smaller for the staple group. This study provides evidence based on a cadaveric model that compression staples have a promising potential to treat transverse patella fractures.

  18. Determination of withdrawal resistance of staple joints constructed with various members of upholstered furniture

    Directory of Open Access Journals (Sweden)

    saeid Kazemi Najafi

    2017-05-01

    Full Text Available The goal of this study was to investigate the effects of joints members type (oriented strand lumber, plywood and poplar wood (Populusdeltoides, penetration deeps of staple (12 and 17mm and adhesives (with and without adhesive on face and edge withdrawal resistance of joints fabricated with staple. Experimental specimens under withdrawal load test of face and edge consisted of two principal structural members, main member and a secondary member which were joined together by one staple. The results showed that joint member, penetration deeps and adhesive significantly influence on the withdrawal resistance. Staple withdrawal resistance in the face was higher than that in the edge. Staple holding resistance increased with the increase of penetration deep and the withdrawal resistance of joints fabricated by adhesive was higher than those without adhesive. The joints made by oriented strand lumber exhibited better performance than other two members and joints made with poplar wood had higher resistance than plywood joints. The highest face (2326N and edge (1265N withdrawal resistances were obtained from joints prepared from oriented strand lumber with adhesive and17mm penetration deeps.

  19. Staple line reinforcement during laparoscopic sleeve gastrectomy: does it affect clinical outcomes?

    Science.gov (United States)

    Glaysher, Michael; Khan, Omar A; Mabvuure, Nigel Tapiwa; Wan, Andrew; Reddy, Marcus; Vasilikostas, Georgios

    2013-01-01

    Although laparoscopic sleeve gastrectomy (LSG) is safe and efficacious treatment for morbid obesity, this procedure is associated with major staple line complications including leakage and bleeding. Staple-line reinforcement (SLR) either through suturing or buttressing with biological or synthetic material has been suggested as a method to prevent these complications. A Best Evidence Topic was constructed to address the question of whether SLR reduced these and other complications. MEDLINE, EMBASE and CINAHL searches up to October 2012 returned 97 unique results, of which nine (one meta-analysis, two randomised controlled trials (RCTs), six prospective cohort studies) provided the best evidence to answer this clinical question. We conclude that current evidence suggests that staple-line reinforcement reduces the incidence of leakage and postoperative complications than non-reinforcement but does not significantly reduce bleeding complications. However, we cannot as yet recommend staple-line reinforcement as the strength of the presented evidence is limited by the variable quality of the published studies. The full-length publication of several abstracts of randomised, controlled trials presented at various recent conferences is awaited. This may provide more data on the effect of staple-line reinforcement on other outcomes largely neglected by currently available studies. Copyright © 2013 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  20. Long-term Evaluation of a Modified Double Staple Technique for Low Anterior Resection.

    Science.gov (United States)

    Illuminati, G; Carboni, F; Ceccanei, G; Pacilè, M A; Pizzardi, G; Palumbo, P; Vietri, F

    2014-01-01

    When performing low anterior resection for rectal cancer with the double staple technique, -closing the rectum with a linear stapler in the abdomen can be challenging, especially when dealing with a narrow pelvis. For such instances we proposed to modify this technique by pulling the rectal stump through the anus, doing an extra-anal resection of the tumor and linear suture of the rectal stump, before performing a standard, stapled colorectal anastomosis. The purpose of this study was to assess the adequacy of this modification of the double staple technique. Retrospective review of 108 patients undergoing a stapled, low colorectal or coloanal anastomosis, after -eversion, extra-anal resection of the tumor and linear closure of the rectal stump for colorectal cancer, from January 1990 to December 2012. Operative mortality was 0.9%. Fourteen patients (13%) presented early, surgery-related complications -consisting of 7 anastomotic leaks, 5 wound infections, 1 ureteral lesion, and 1 peristomal abscess. Late complications related to surgery included 5 incisional hernias (4.6%), 4 anastomotic strictures (3.7%), 4 neurogenic bladders (3.7%) and 2 fecal incontinences (1.8%). The incidence of local disease recurrence was 10%. Surgical and oncological results validate the proposed modification of the double staple technique, when facing difficulties in suturing the rectum from the abdomen. Copyright© Acta Chirurgica Belgica.

  1. Is STAPLE algorithm confident to assess segmentation methods in PET imaging?

    Science.gov (United States)

    Dewalle-Vignion, Anne-Sophie; Betrouni, Nacim; Baillet, Clio; Vermandel, Maximilien

    2015-12-01

    Accurate tumor segmentation in [18F]-fluorodeoxyglucose positron emission tomography is crucial for tumor response assessment and target volume definition in radiation therapy. Evaluation of segmentation methods from clinical data without ground truth is usually based on physicians’ manual delineations. In this context, the simultaneous truth and performance level estimation (STAPLE) algorithm could be useful to manage the multi-observers variability. In this paper, we evaluated how this algorithm could accurately estimate the ground truth in PET imaging. Complete evaluation study using different criteria was performed on simulated data. The STAPLE algorithm was applied to manual and automatic segmentation results. A specific configuration of the implementation provided by the Computational Radiology Laboratory was used. Consensus obtained by the STAPLE algorithm from manual delineations appeared to be more accurate than manual delineations themselves (80% of overlap). An improvement of the accuracy was also observed when applying the STAPLE algorithm to automatic segmentations results. The STAPLE algorithm, with the configuration used in this paper, is more appropriate than manual delineations alone or automatic segmentations results alone to estimate the ground truth in PET imaging. Therefore, it might be preferred to assess the accuracy of tumor segmentation methods in PET imaging.

  2. An Assessment of the Impact of Fortification of Staples and Condiments on Micronutrient Intake in Young Vietnamese Children

    Directory of Open Access Journals (Sweden)

    Jacques Berger

    2012-08-01

    Full Text Available Targeted fortification programs for infants and young children are an effective strategy to prevent micronutrient deficiencies in developing countries, but the role of large-scale fortification of staple foods and condiments is less clear. Dietary modeling in children aged 6–60 months was undertaken, based on food consumption patterns described in the 2009 national food consumption survey, using a 24-h recall method. Consumption data showed that the median intake of a child for iron, vitamin A and zinc, as a proportion of the Vietnamese Recommended Dietary Allowance (VRDA, is respectively 16%–48%, 14%–49% and 36%–46%, (depending on the age group. Potential fortification vehicles, such as rice, fish/soy sauces and vegetable oil are consumed daily in significant amounts (median: 170 g/capita/day, 4 g/capita/day and 6 g/capita/day, respectively by over 40% of the children. Vegetable oil fortification could contribute to an additional vitamin A intake of 21%–24% of VRDA recommended nutrient intake, while fortified rice could support the intakes of all the other micronutrients (14%–61% for iron, 4%–11% for zinc and 33%–49% of folate requirements. Other food vehicles, such as wheat flour, which is consumed by 16% of children, could also contribute to efforts to increase micronutrient intakes, although little impact on the prevalence of micronutrient deficiencies can be expected if used alone. The modeling suggests that fortification of vegetable oil, rice and sauces would be an effective strategy to address micronutrient gaps and deficiencies in young children.

  3. An assessment of the impact of fortification of staples and condiments on micronutrient intake in young Vietnamese children.

    Science.gov (United States)

    Laillou, Arnaud; Mai, Le Bach; Hop, Le Thi; Khan, Nguyen Cong; Panagides, Dora; Wieringa, Frank; Berger, Jacques; Moench-Pfanner, Regina

    2012-09-01

    Targeted fortification programs for infants and young children are an effective strategy to prevent micronutrient deficiencies in developing countries, but the role of large-scale fortification of staple foods and condiments is less clear. Dietary modeling in children aged 6-60 months was undertaken, based on food consumption patterns described in the 2009 national food consumption survey, using a 24-h recall method. Consumption data showed that the median intake of a child for iron, vitamin A and zinc, as a proportion of the Vietnamese Recommended Dietary Allowance (VRDA), is respectively 16%-48%, 14%-49% and 36%-46%, (depending on the age group). Potential fortification vehicles, such as rice, fish/soy sauces and vegetable oil are consumed daily in significant amounts (median: 170 g/capita/day, 4 g/capita/day and 6 g/capita/day, respectively) by over 40% of the children. Vegetable oil fortification could contribute to an additional vitamin A intake of 21%-24% of VRDA recommended nutrient intake, while fortified rice could support the intakes of all the other micronutrients (14%-61% for iron, 4%-11% for zinc and 33%-49% of folate requirements). Other food vehicles, such as wheat flour, which is consumed by 16% of children, could also contribute to efforts to increase micronutrient intakes, although little impact on the prevalence of micronutrient deficiencies can be expected if used alone. The modeling suggests that fortification of vegetable oil, rice and sauces would be an effective strategy to address micronutrient gaps and deficiencies in young children.

  4. Design of antiviral stapled peptides containing a biphenyl cross-linker.

    Science.gov (United States)

    Muppidi, Avinash; Zhang, Hongtao; Curreli, Francesca; Li, Nan; Debnath, Asim K; Lin, Qing

    2014-04-01

    Here we report the design and synthesis of a panel of stapled peptides containing a distance-matching biphenyl cross-linker based upon a peptide capsid assembly inhibitor reported previously. Compared with the linear peptide, the biphenyl-stapled peptides exhibited significantly enhanced cell penetration and potent antiviral activity in the cell-based infection assays. Isothermal titration calorimetry and surface plasmon resonance experiments revealed that the most active stapled CAI peptide binds to the C-terminal domain of HIV capsid protein as well as envelop glycoprotein gp120 with low micromolar binding affinities, and as a result, inhibits both the HIV-1 virus entry and the virus assembly. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Primary and repeated stapled hemorrhoidopexy for prolapsing hemorrhoids: Follow-up to five years

    DEFF Research Database (Denmark)

    Raahave, D.; Pedersen, I.K.; Jepsen, Lars Vedel

    2008-01-01

    , immediately after the procedure, at three months, and at one to five years postoperatively. The anatomy score ranged from 1 (normal anus) to 7 (worst prolapse). We also evaluated operation time, analgesia, staple line position, postoperative pain score, technical failures, postoperative complications, need...... of 258 patients (7 percent). The median anatomy score decreased from 6 (range, 3-7) preoperatively to 1 (range, 1-6) at last follow-up, irrespective of one or a repeated stapled hemorrhoidopexy, surgical excision, or technical failure. The risk of reintervention was greatest during the first year after...... a stapled hemorrhoidopexy. Overall, patient satisfaction was high and correlated significantly with the anatomy score (r = 0.46, P

  6. Comparison of Reinforcement Techniques Using Suture on Staple-Line in Sleeve Gastrectomy.

    Science.gov (United States)

    Rogula, Tomasz; Khorgami, Zhamak; Bazan, Martin; Mamolea, Cristina; Acquafresca, Pablo; El-Shazly, Omar; Aminian, Ali; Schauer, Philip

    2015-11-01

    Sleeve gastrectomy is a common procedure in recent years for treatment of morbid obesity however leak from staple-line is its main challenging complication. Despite numerous studies regarding leak after sleeve gastrectomy, there is still no conclusion on reinforcement of staple-line in this procedure. The purpose of this study was to compare two methods of oversewing staple-line versus no reinforcement. Resected stomachs of 30 patients undergoing laparoscopic sleeve gastrectomy were evaluated for bursting pressure immediately after extraction from the abdomen. Reinforcement technique was applied in random order to 3 segments of the staple-line on each specimen: continuous Lembert's sutures, continuous through-and-through sutures, and no reinforcement. Bursting pressure was determined by injection of methylene blue solution into lumen of resected stomach and recording pressure at which leakage occurs. Location of leak, intragastric pressure, and volume at first leak were recorded. Baseline characteristics of patients were similar in randomized groups for order of reinforcement technique. Mean ischemia time of specimens was 17.4 ± 10.4 min. No leaks were observed in segments reinforced with Lembert's oversewing technique. The through-and-through reinforcement segments were first to leak in 21 out of 30 cases (70 %) with mean leak pressure of 570 mmHg and mean leak volume of 399 ml. Leakage occurred in 9 segments (30 %) with no reinforcement with a leak pressure of 329 mmHg and volume of 380 ml. In vitro, Lembert's suture reinforcement technique on stapled human stomach is associated with less leakage rate in comparison to through-and-through reinforcement and non-reinforced staple-line.

  7. Clinical outcomes of nitinol staples for preventing curve progression in idiopathic scoliosis.

    Science.gov (United States)

    Lavelle, William F; Samdani, Amer F; Cahill, Patrick J; Betz, Randal R

    2011-01-01

    Although bracing for idiopathic scoliosis is moderately successful, its efficacy has been called into question and it carries associated psychosocial ramifications. In this study we report the background, rationale, indications, surgical techniques, and early results of vertebral body stapling (VBS) in patients with idiopathic scoliosis. We reviewed the literature on growth modulation of the growing spine and the concepts behind the use of VBS as a fusionless strategy. The indications are derived from retrospectively reviewed patients with idiopathic scoliosis treated with VBS followed for a minimum of 2 years. Indications for staple use included: (a) age VBS as an alternative to bracing. Level III.

  8. Rectovaginal Fistula after Low Anterior Resection for Rectal Cancer Using a Double Stapling Technique

    Directory of Open Access Journals (Sweden)

    Satoshi Yodonawa

    2010-07-01

    Full Text Available A 55-year-old female underwent low anterior resection for rectal cancer using a double stapling technique. She developed a rectovaginal fistula on the 9th postoperative day. She was discharged from hospital after undergoing transverse colostomy, and 5 months later she underwent transvaginal repair of the rectovaginal fistula. She subsequently had an uneventful recovery. The leading cause of this complication is involvement of the posterior wall of the vagina in the staple line when firing the circular stapler. Transvaginal repair with a diverting stoma for rectovaginal fistula is a safe, minimally invasive and effective method.

  9. Energy and Protein Consumption of Manggadong Rice as Local Wisdom and Effort of Staple Food Diversification

    OpenAIRE

    Aritonang, Evawany; Naria, evi; Rohana, Ainun

    2015-01-01

    Carbohydrates as one of the macro nutrients have significant role in the food pattern in which 60-70% of the recommended energy requirement comes from carbohydrates, and generally being a staple food. It is unfortunate that almost all people in Indonesia have made rice as the main source of carbohydrates and became a staple food. This situation affects the high dependence on rice. This study aims to modify manggadong as local wisdom into manggadong rice that is rice mixed with 4 types of cass...

  10. Regional Trade in Food Staples : Prospects for Stimulating Agricultural Growth and Moderation Food Security Crises in Eastern and Southern Africa

    OpenAIRE

    World Bank

    2008-01-01

    This report focuses on growing trade in food staples in the Southern and Eastern African region of Africa as one of the largest growth opportunities available to African farmers. This paper examines the impact of regional trade in food staples, both for maintaining farmer incentives in surplus food production zones and for moderating price spikes in deficit areas. The paper begins by ident...

  11. Cultivation of Hylocerus sp. focusing on vegetative propagation, shading and mineral fertiliser=Cultivo de Hylocereus sp. com enfoque na propagação vegetativa, sombreamento e adubação mineral

    Directory of Open Access Journals (Sweden)

    Edmilson Igor Bernardo Almeida

    2016-06-01

    Full Text Available The red pitahaya is a semi-epiphytic cactaceous plant, whose cultivation has attracted great interest in recent years as a result of the growing demand for the fruit, characterised by an exotic appearance and the significant price acquired in the market. However, studies and information on this crop are still rare, especially for the conditions of soil and climate found in Brazil. Currently there are areas in Brazil for the commercial cultivation of red pitahaya, which are based on information adapted from such countries as Colombia, Israel, Mexico and Vietnam, pioneers with greater experience in the cultivation of this fruit. Information generated in the state of São Paulo is also used for other producing regions of Brazil; however it is basic and insufficient for achieving maximum potential productivity. Basic information regarding vegetative propagation, shading and mineral nutrition has not been scientifically defined, and acts as a limitation to crop development and production in the country, particularly in the Northeast. The aim therefore, was to make a brief presentation of the red pitahaya crop and gather relevant scientific results, so that they can contribute to improve exploitation of the crop in Brazil. Studies of Hylocereus sp. in the state of Ceará and other producing regions of Brazil point to the excellent adaptation of this species to environmental conditions in Brazil, and indicate its high productive potential. Some characteristics, such as the easy rooting of cuttings, acclimatisation to cultivation in full sunlight, positive response to mineral fertilizer, and precocity, make Hylocereus sp. a potential option for the diversification of irrigated fruit production in Brazil. = A pitaia vermelha é uma cactácea semi-epífita, cujo cultivo vem despertando grande interesse nos últimos anos em função da crescente demanda pelos seus frutos, caracterizados pela aparência exótica e pelos preços expressivos que adquirem no

  12. Development of Flame Resistant Combat Uniform Fabrics Made from Long Staple Wool and Aramid Blend Yarn

    Science.gov (United States)

    2013-04-15

    UNIFORMS ARAMID FIBERS FIRE RESISTANT TEXTILES FABRICS CAMOUFLAGE KNITTED FABRICS PERFORMANCE...3 2. Analyses of aramid fibers (via Uster Test...20.5 micron wool and an aramid blend consisting of Nomex Type N325 (natural, low crystallinity), Kevlar, and P140 antistatic fiber in 100 mm staple

  13. Will fortification of staple foods make a difference to the dietary ...

    African Journals Online (AJOL)

    Prior to 2003 there was no mandatory fortification of staple foods, with the exception of iodine added to salt. Mandatory fortification of maize and wheat flour was introduced in October 2003. Micronutrient values of fortified wheat and maize food sources were determined by chemical analyses of these foods. These values ...

  14. Will fortification of staple foods make a difference to the dietary ...

    African Journals Online (AJOL)

    making decisions regarding the improvement of the dietary intake of children at a national level. In the short term, such decisions have included supplementation with either oral supplements such as iron and vitamin A12 or the provision of enriched complementary foods or beverages such as milk powder, and staple foods ...

  15. Analysis Of Staple Food Price Behaviour In Ogoja And Yala Local ...

    African Journals Online (AJOL)

    Analysis Of Staple Food Price Behaviour In Ogoja And Yala Local Govt. Areas in Cross River ... Journal of Agriculture, Forestry and the Social Sciences ... The study examined price behaviour of four selected agricultural products – rice, beans, garri and yam in Ogojo and Yala Local Government Areas in cross River state.

  16. Vertebral Body Stapling for Moderate Juvenile and Early Adolescent Idiopathic Scoliosis: Cautions and Patient Selection Criteria.

    Science.gov (United States)

    Bumpass, David B; Fuhrhop, Sara K; Schootman, Mario; Smith, June C; Luhmann, Scott J

    2015-12-01

    Single-surgeon retrospective case series. To validate and further describe clinical and radiographic outcomes of patients undergoing vertebral body stapling (VBS), with the goal of learning if VBS is a safe and effective alternative to bracing for treating moderate idiopathic scoliosis (IS) in the growing pediatric patient. VBS is a growth-modulation technique to control moderate idiopathic scoliosis (IS) while avoiding fusion. Existing studies state successful curve control rates equivalent to bracing, but the majority of reports have come from a single institution. All IS patients who underwent VBS by 1 surgeon were included. Indications were brace intolerance and a structural coronal curve of 25° to 40°. Proportional nitinol staples were used in all cases. Pre- and postoperative radiographs, pulmonary function testing, and physical exam measurements were serially recorded. VBS was performed on 35 patients (28 females, 7 males) with mean age 10.5 years (range 7.0-14.6 years). Total of 31 patients (33 stapled curves) completed follow-up. Preoperative Risser grade was 0 in 31 patients, 1 in 1 patient, and 2 in 3 patients. Stapled curves were controlled with 30% was predictive of ultimate curve control. No neurologic complications were encountered; 5 patients (14%) developed small pneumothoraces. This series contains the most patients and longest followup reported for VBS. Successful curve control was achieved less frequently than in previous reports, particularly in patients <10 years. 4.

  17. A Short Double-Stapled Peptide Inhibits Respiratory Syncytial Virus Entry and Spreading.

    Science.gov (United States)

    Gaillard, Vanessa; Galloux, Marie; Garcin, Dominique; Eléouët, Jean-François; Le Goffic, Ronan; Larcher, Thibaut; Rameix-Welti, Marie-Anne; Boukadiri, Abdelhak; Héritier, Julien; Segura, Jean-Manuel; Baechler, Elodie; Arrell, Miriam; Mottet-Osman, Geneviève; Nyanguile, Origène

    2017-04-01

    Synthetic peptides derived from the heptad repeat (HR) of fusion (F) proteins can be used as dominant negative inhibitors to inhibit the fusion mechanism of class I viral F proteins. Here, we have performed a stapled-peptide scan across the HR2 domain of the respiratory syncytial virus (RSV) F protein with the aim to identify a minimal domain capable of disrupting the formation of the postfusion six-helix bundle required for viral cell entry. Constraining the peptides with a single staple was not sufficient to inhibit RSV infection. However, the insertion of double staples led to the identification of novel short stapled peptides that display nanomolar potency in HEp-2 cells and are exceptionally robust to proteolytic degradation. By replacing each amino acid of the peptides by an alanine, we found that the substitution of residues 506 to 509, located in a patch of polar contacts between HR2 and HR1, severely affected inhibition. Finally, we show that intranasal delivery of the most potent peptide to BALB/c mice significantly decreased RSV infection in upper and lower respiratory tracts. The discovery of this minimal HR2 sequence as a means for inhibition of RSV infection provides the basis for further medicinal chemistry efforts toward developing RSV fusion antivirals. Copyright © 2017 Gaillard et al.

  18. Preparation and Characterization of Nitinol Bone Staples for Cranio-Maxillofacial Surgery

    Science.gov (United States)

    Lekston, Z.; Stróż, D.; Jędrusik-Pawłowska, M.

    2012-12-01

    The aim of this work was to form NiTi and TiNiCo body temperature activated and superelastic staples for clinical joining of mandible and face bone fractures. The alloys were obtained by VIM technique. Hot and cold processing was applied to obtain wires of required diameters. The martensitic transformation was studied by DSC, XRD, and TEM. The shape memory effects were measured by a bend and free recovery ASTM F2082-06 test. The superelasticity was recorded in the tension stress-strain and by the three-point bending cycles in an instrument equipped with a Hottinger force transducer and LVDT. Excellent superelastic behavior of TiNiCo wires was obtained after cold working and annealing at 400-500 °C. The body temperature activated shape memory staples were applied for fixation of mandibular condyle fractures. In experiments on the skull models, fixation of the facial fractures by using shape memory and superelastic staples were compared. The superelastic staples were used in osteosynthesis of zygomatico-maxillo-orbital fractures.

  19. A review of the processing of wool and wool blends on the short staple (Cotton) system

    CSIR Research Space (South Africa)

    Erdursun, HH

    1981-11-01

    Full Text Available The past decade witnesses a growing interest in the processing of wool on the short staple ( cotton ) system and a great deal of research effort has been directed worldwide towards the solution of the various problems which present themselves when...

  20. A test of market integration: the case of Nigerian staple foodstuffs ...

    African Journals Online (AJOL)

    A test of market integration: the case of Nigerian staple foodstuffs. Rosemary N Okoh, PC Egbon. Abstract. This study attempts to obtain conclusions about the integration of the Nigerian foodstuff market system. The major pre-occupation of this study is to determine the presence and level of integration in Nigeria's foodstuff ...

  1. A Review of Stapled Peptides and Small Molecules to Inhibit Protein-Protein Interactions in Cancer.

    Science.gov (United States)

    Iyer, Vidhya V

    2016-01-01

    Disruption of binding of two or more molecules to a protein surface is a common basis of inhibition of many biological activities. Smallmolecule inhibitors, antibodies, proteins, and peptidomimetics have been examined as ways to antagonize receptor activity. The peptide α-helix plays a crucial role in the function of many proteins. Hence, much effort has been invested in mimicking α-helices at the binding interface of two proteins to competitively inhibit their interactions. Peptide stapling involves choosing two amino acids on the same face of a native peptide sequence for substitution with non-native amino acids whose side chains can be "stapled" together. The focus of this review is to survey the prevalence in literature of stapled peptides and small-molecule antagonists of interactions of selected mammalian cancer targets, such as β-catenin, BH3-only members of the Bcl-2 family of proteins, eIF4E/G, estrogen receptor complexes, EZH2, Mdm2, Notch, p110α, and survivin. The increasing interest in protein targets currently considered to be "undruggable" with greater selectivity for existing targets, with the goal of overcoming the omnipresent problem of resistance, could be served well by utilizing information about protein-protein interactions to develop both small-molecule and stapled peptide inhibitors.

  2. Effect of different cereal blends on the quality of Injera a staple food ...

    African Journals Online (AJOL)

    Majority of the Ethiopian population are dependent on tef (Eragrostis tef (Zucc) trotter) flour to make injera, a staple food in Ethiopia, although injera could be made from different cereals. The price of tef, however, is high and the yield potential of the crop is low. Thus, searching for alternative cheaper grains and developing a ...

  3. Heavy and Toxic Metals in Staple Foodstuffs and Agriproduct from Contaminated Soils

    CERN Document Server

    Gorbunov, A V; Kistanov, A A; Lyapunov, S M; Okina, O I; Ramadan, A B

    2002-01-01

    This article presents basic data on the content of Cr, Fe, Ni, Cu, Zn, As, Cd, Sb, Hg, and Pb in staple foodstuffs and agriproduct grown in Russia (Astrakhan region and the town of Belovo) and Egypt (Helwan region). The dependence of the concentration of metals in agriproducts on the content and chemical form of existence in irrigation water and soils is indicated.

  4. Inflation Pressures for Ex Vivo Lung Biopsies After Application of Graduated Compression Staples.

    Science.gov (United States)

    Imhoff, Darren J; Monnet, Eric

    2016-01-01

    To compare 2 graduated compression staples (Tri-Staple™, Covidien, Norwalk, CT) and standard staples (Endo GIA™, Covidien) for lung biopsy in dogs. Ex vivo experimental study, randomized, unblocked. Lung lobes (n = 18) from 4 canine cadavers. Eighteen lung lobes were harvested from 4 dogs immediately after euthanasia and randomized to 1 of 3 staples (n = 6 per stapler type). Each lung lobe was intubated and maintained inflated at 10 cmH2O. A biopsy of the periphery of each lung lobe was taken approximately 3 cm from the edge with a stapling device; the Tri-Staple™ medium/thick (TST), Tri-Staple™ vascular/medium (TSV), and Endo GIA™ 45-2.5 (EG). Each lobe was inflated to a maximum of 45 cmH2O of water to determine the pressure at which air leakage occurred (leak pressure). The mean (95% confidence interval) leak pressure was 38.0 cmH2O (33.1-42.9) for EG, 29.2 (24.3-34.0) for TSV, and 26.0 (21.1-30.9) for TST. The mean leak pressure was significantly higher for EG than TSV (P = .016) and for EG than TST (P = .002), but was not different between TSV and TST (P = .344). One TSV leaked at 20 cmH2O and 1 TST leaked at 17 cmH2O. The surface area of the biopsy samples was not significantly different for staple types (P = .183). Both TST and TSV leaked at significantly lower airway pressures than EG and may not be suitable for canine lung biopsy as some specimens leaked at pressures of 20 cmH2O or less. © Copyright 2015 by The American College of Veterinary Surgeons.

  5. Enrichment of food staples through plant breeding: a new strategy for fighting micronutrient malnutrition.

    Science.gov (United States)

    Bouis, H

    1995-01-01

    The 4 strategies for reducing micronutrient malnutrition are supplementation, fortification, dietary diversification, and disease reduction. Arguments are adduced for investing in a 5th strategy, plant breeding. This long-term strategy has already been taken by the Consultative Group on International Agricultural Research (CGIAR), a group of 17 agricultural research centers seeking to raise farm productivity in developing countries. A coordinated plan has been developed involving collaborative research on 5 major staple food crops (rice, wheat, maize, beans, and cassava) between 5 core research institutes. The feasibility of a plant breeding strategy hinges on 5 core questions: 1) the scientific feasibility and the time needed to breed staple food varieties whose seeds are micronutrient-dense, 2) the effect of breeding micronutrient-dense seeds on plant yields, 3) whether breeding for micronutrient-dense seeds will change processing or consumer characteristics of staple foods, 4) whether micronutrient bioavailability will be increased to a significant degree in staples, and 5) the existence of other inexpensive, sustainable strategies for reducing micronutrient malnutrition. Zinc-dense wheat varieties, developed at the Waite Agricultural Research Institute of the University of Adelaide, are already being grown in Australia. 10 years may be required before nutritionally-improved varieties could be available for commercial production by farmers in developing countries. Such small amounts will not alter the appearance, taste, texture, or cooking quality of foods. If the presently low iron content of food staples could be increased by a factor of 3.5 this would double bioavailable iron. This strategy does hold promise for significantly reducing recurrent expenditures required for these higher-cost, short-run programs by significantly reducing the numbers of people requiring treatment. It would seem prudent to invest now in a plant breeding strategy to maintain momentum

  6. Influence of leaf retention on cutting propagation of Lavandula dentata L.

    OpenAIRE

    Bona, Claudine Maria de; Biasi, Luiz Antonio

    2010-01-01

    Vegetative propagation of lavender offers several advantages over sexual propagation, among them crop homogeneity and yield of higher quality essential oil. However, Lavandula species have been propagated mostly by seeds and are said to be recalcitrant to rooting when propagated by cuttings. During cutting propagation, one of the important variables that influence the rooting capacity of cuttings is the leaf retention. The objective of this work was to evaluate the influence of leaf retention...

  7. Presettlement Vegetation

    Data.gov (United States)

    Minnesota Department of Natural Resources — Presettlement vegetation of Minnesota based on Marschner's original analysis of Public Land Survey notes and landscape patterns. Marschner compiled his results in...

  8. ADVANCES IN PEACH, NECTARINE AND PLUM PROPAGATION

    Directory of Open Access Journals (Sweden)

    NEWTON ALEX MAYER

    2017-12-01

    Full Text Available ABSTRACT Nursery trees of stone fruits (Prunus spp. are traditionally produced by union of two distinct genotypes - the rootstock and the scion - which, by grafting, form a composite plant that will be maintained throughout of all plant life. In Brazil, the rootstocks are predominantly seed propagated and therefore usually results in heterogeneous trees for vigor and edaphic adaptation. However, with advances in rootstock breeding programs that released cultivars and certification in several countries (notably in Europe, the system will come gradually evolving for vegetative propagation (cuttings and tissue culture and use of seeds of selected rootstocks with specific characteristics and potted nursery trees production. For scion cultivar propagation, the budding system (with its many variations has predominantly been adopted in major producing countries. This review had as objective to comment main propagation methods adopted for rootstocks and scion in peach, nectarine and plum, and recent technical progress obtained as well as the needs of improvement for nursery tree production.

  9. ADVANCES IN THE PROPAGATION OF RAMBUTAN TREE

    Directory of Open Access Journals (Sweden)

    RENATA APARECIDA DE ANDRADE

    2017-12-01

    Full Text Available ABSTRACT The reality of Brazilian fruit farming is demonstrating increasing demand for sustainable information about native and exotic fruit, which can diversify and elevate the efficiency of fruit exploitation. Research on propagation of fruits tree is very important so that it can provide a protocol for suitable multiplication of this fruitful. Due to the great genetic diversity of rambutan plants, it is recommended the use of vegetative propagated plants. This research aimed to evaluate the propagation of rambutan by cuttings, layering and grafting, as well as seed germination and viability without storage. The results of this research indicate that this species can be successfully propagated by layering, grafting and seeds. We also observed that the germination percentage of seeds kept inside the fruits for six days were not influenced by the different substrates used in this experiment.

  10. Comparison of single-stapling and hemi-double-stapling methods for intracorporeal esophagojejunostomy using a circular stapler after totally laparoscopic total gastrectomy.

    Science.gov (United States)

    Amisaki, Masataka; Kihara, Kyoichi; Endo, Kanenori; Suzuki, Kazunori; Nakamura, Seiichi; Sawata, Takashi; Shimizu, Tetsu

    2016-07-01

    Laparoscopic total gastrectomy is not widely performed because of the difficulty of esophagojejunal reconstruction. This study analyzed complication rates of two different methods for reconstruction by a circular stapler after totally laparoscopic total gastrectomy (TLTG). Between 2010 and 2014, clinical data of 19 patients who underwent TLTG for gastric adenocarcinoma were collected retrospectively. There were two methods to fix the anvil of a circular stapler into the distal esophagus: In the single-stapling technique (SST) group, Endo-PSI(II) was used for purse-suturing on the distal esophagus for reconstruction, and in the hemi-double-stapling technique (hemi-DST) group, the esophagus was cut by linear stapler with the entry hole of the anvil shaft opened after inserting the anvil tail. In both groups, surgical procedures were the same, except for the reconstruction. All TLTGs were performed securely without mortality. Intracorporeal laparoscopic esophagojejunal anastomosis was performed successfully for all the patients. In the hemi-DST group, four patients experienced anastomotic stenosis, three of whom required endoscopic balloon dilation. In contrast, no stenosis was seen in the SST group (p = 0.033). Anastomosis with SST is preferred to that with hemi-DST to minimize postoperative complications.

  11. Application of a Penrose drain guide for vascular stapling during hepatic surgery: how I do it.

    Science.gov (United States)

    Hicks, Caitlin W; Choti, Michael A

    2014-02-01

    The use of stapling devices to manage vascular pedicles during hepatic surgery has been a significant advance in the field. However, insertion and application of the stapler in vascular dissection planes can be associated with injury to adjacent structures. We describe a five-step technique using a silicone Penrose drain to aid in the positioning of an endovascular stapling device to obtain vascular control during hepatectomy. The use is described here for hepatic vein management during right hepatectomy. The technique can be also used for other applications when transecting major vessels during major liver surgery. The use of this silicone Penrose-guided endovascular stapler technique is a simple, cost-effective maneuver that can be used to improve control and prevent vascular injury during the division of major vascular structures when performing hepatic surgery.

  12. Genetically encoding an electrophilic amino acid for protein stapling and covalent binding to native receptors.

    Science.gov (United States)

    Chen, Xiao-Hua; Xiang, Zheng; Hu, Ying S; Lacey, Vanessa K; Cang, Hu; Wang, Lei

    2014-09-19

    Covalent bonds can be generated within and between proteins by an unnatural amino acid (Uaa) reacting with a natural residue through proximity-enabled bioreactivity. Until now, Uaas have been developed to react mainly with cysteine in proteins. Here we genetically encoded an electrophilic Uaa capable of reacting with histidine and lysine, thereby expanding the diversity of target proteins and the scope of the proximity-enabled protein cross-linking technology. In addition to efficient cross-linking of proteins inter- and intramolecularly, this Uaa permits direct stapling of a protein α-helix in a recombinant manner and covalent binding of native membrane receptors in live cells. The target diversity, recombinant stapling, and covalent targeting of endogenous proteins enabled by this versatile Uaa should prove valuable in developing novel research tools, biological diagnostics, and therapeutics by exploiting covalent protein linkages for specificity, irreversibility, and stability.

  13. Endoscopic stapled marsupialisation of chronic presacral sinus following low anterior resection

    DEFF Research Database (Denmark)

    Abild, Nina; Bulut, O; Nielsen, C B

    2012-01-01

    Background and Aims: Chronic presacral sinus (CPS) following anastomose leakage is one of the most serious complications after restorative colorectal surgery. CPS is associated with long course of treatments and can prevent stoma closure. We present our experience with endoscopic stapled marsupia......Background and Aims: Chronic presacral sinus (CPS) following anastomose leakage is one of the most serious complications after restorative colorectal surgery. CPS is associated with long course of treatments and can prevent stoma closure. We present our experience with endoscopic stapled......-VAC). Results and Conclusion: ESM procedure was successful for six patients, resulted in good healing in four patients and no sinus recurrence of the CPS. In two patients the stoma was re-versed. Two patients were treated with neo-adjuvant chemoradiotherapy, who also developed small bowel fistulae. ESM...... is a simple treatment for CPS and can accelerate healing of chronic presacral cavity, reduce complications and enable to reverse the stoma in selected cases....

  14. Totally stapled gastrojejunal anastomosis using hybrid NOTES: single 12-mm trocar approach in a porcine model.

    Science.gov (United States)

    Polese, Lino; Merigliano, Stefano; Mungo, Benedetto; Rizzato, Roberto; Luisetto, Roberto; Ancona, Ermanno; Norberto, Lorenzo

    2012-09-01

    The aim of this study was to evaluate the feasibility of a totally stapled gastrojejunal anastomosis performed using one transabdominal 12-mm trocar and a gastroscope in a porcine model. The procedure was carried out on six domestic pigs weighing 45 kg using a hybrid technique with a gastroscope and a 12-mm Hasson trocar, positioned in the left hypochondrium. At the end of the procedure a mechanical circular 21-mm gastrojejunal anastomosis was performed by inserting the stapler through a small gastrotomy after enlarging the trocar incision. In all six cases the procedure was completed through a single 3 cm abdominal incision and without complications. The mean operating time was 2 h, and endoscopic investigation showed that the anastomoses were intact, patent, and airtight. Totally stapled gastrojejunal anastomosis using a hybrid NOTES-single 12-mm trocar approach is a feasible procedure in the porcine model. Further survival studies are warranted, particularly to evaluate the functional results of this procedure.

  15. Subcutaneous hemangiosarcoma induced by a foreign body (steel staple) in a cat.

    Science.gov (United States)

    Tan, Rommel Max; Singh, Kuldeep; Sandman, Kristi

    2013-04-01

    An 8-year-old, female domestic shorthair cat was presented with a ventral abdominal subcutaneous mass. A radiograph showed that the center of the mass contained what appeared to be steel sutures, presumed to be from an ovariohysterectomy performed 7 years earlier. The excised mass was irregular and contained numerous pockets filled with friable necrotic material and hemorrhages that were dissected by fibrous connective tissue bands. Multiple tangled and fragmented pieces of steel staples were deeply embedded within the mass. Histologically, the mass was non-encapsulated, densely cellular, and infiltrative. Neoplastic cells lined caverns and channels and were factor VIII-positive by immunohistochemistry. The neoplastic cells were oval to round with granular cytoplasm and vesicular nucleus and exhibited moderate cellular and nuclear pleomorphism. A diagnosis of subcutaneous hemangiosarcoma was made. To our knowledge, this is the first report of foreign body associated hemangiosarcoma and the first case of steel staple associated neoplasm in domestic animals.

  16. Epileptiform discharge propagation

    DEFF Research Database (Denmark)

    Mălîia, Mihai Dragos; Meritam, Pirgit; Scherg, Michael

    2016-01-01

    propagation was analyzed using sequential voltage-maps of the averaged spikes, and principal components analysis. When propagation was detected, sources were modeled both at onset and peak. RESULTS: Propagation occurred in half of the patients. The median time of propagation between onset and peak was 17 ms......OBJECTIVE: To investigate how often discharge propagation occurs within the spikes recorded in patients evaluated for epilepsy surgery, and to assess its impact on the accuracy of source imaging. METHODS: Data were analyzed from 50 consecutive patients who had presurgical workup. Discharge....... In 60% of the cases with propagation (15/25 patients) this remained in the same sub-lobar area where onset occurred. The accuracy of source imaging in cases of propagating spikes was 67% when only analyzing onset or peak. This was lower as compared to cases without propagation (79%). Combining source...

  17. Viscothermal wave propagation

    NARCIS (Netherlands)

    Nijhof, M.J.J.

    2010-01-01

    In this work, the accuracy, efficiency and range of applicability of various (approximate) models for viscothermal wave propagation are investigated. Models for viscothermal wave propagation describe thewave behavior of fluids including viscous and thermal effects. Cases where viscothermal effects

  18. The Stapled AKAP Disruptor Peptide STAD-2 Displays Antimalarial Activity through a PKA-Independent Mechanism.

    Directory of Open Access Journals (Sweden)

    Briana R Flaherty

    Full Text Available Drug resistance poses a significant threat to ongoing malaria control efforts. Coupled with lack of a malaria vaccine, there is an urgent need for the development of new antimalarials with novel mechanisms of action and low susceptibility to parasite drug resistance. Protein Kinase A (PKA has been implicated as a critical regulator of pathogenesis in malaria. Therefore, we sought to investigate the effects of disrupted PKA signaling as a possible strategy for inhibition of parasite replication. Host PKA activity is partly regulated by a class of proteins called A Kinase Anchoring Proteins (AKAPs, and interaction between HsPKA and AKAP can be inhibited by the stapled peptide Stapled AKAP Disruptor 2 (STAD-2. STAD-2 was tested for permeability to and activity against Plasmodium falciparum blood stage parasites in vitro. The compound was selectively permeable only to infected red blood cells (iRBC and demonstrated rapid antiplasmodial activity, possibly via iRBC lysis (IC50 ≈ 1 μM. STAD-2 localized within the parasite almost immediately post-treatment but showed no evidence of direct association with PKA, indicating that STAD-2 acts via a PKA-independent mechanism. Furosemide-insensitive parasite permeability pathways in the iRBC were largely responsible for uptake of STAD-2. Further, peptide import was highly specific to STAD-2 as evidenced by low permeability of control stapled peptides. Selective uptake and antiplasmodial activity of STAD-2 provides important groundwork for the development of stapled peptides as potential antimalarials. Such peptides may also offer an alternative strategy for studying protein-protein interactions critical to parasite development and pathogenesis.

  19. Anastomotic leak rate and outcome for laparoscopic intra-corporeal stapled anastomosis

    Directory of Open Access Journals (Sweden)

    Goriainov Vitali

    2010-01-01

    Full Text Available Aims :A prospective clinical audit of all patients undergoing laparoscopic surgery with the intention of primary colonic left-sided intracorporeal stapled anastomosis to identify the rate of anastomotic leaks on an intention to treat basis with or without defunctioning stoma. Materials and Methods : All patients undergoing laparoscopic colorectal surgery resulting in left-sided stapled anastomosis were included with no selection criteria applied. All operations were conducted by the same surgical team and the same preparation and intraoperative methods were used. The factors analyzed for this audit were patient demographics (age and sex, indication for operation, procedure performed, height of anastomosis, leak rate and the outcome, inpatient stay, mortality, rate of defunctioning stomas, and rate of conversion to open procedure. Results for anastomotic leakage were compared with known results from the Wessex Colorectal Audit for open colorectal surgery. Results : A total of 69 patients (43 females, 26 males; median age 69 years, range 19 - 86 years underwent colonic procedures with left-sided intracorporeal stapled anastomoses. Of these, 14 patients underwent reversal of Hartmann′s, 42 - Anterior Resection, 11 - Sigmoid Colectomy, 2 - Left Hemicolectomy. Excluding reversals of Hartmann′s, 29 operations were performed for malignant and 26 for benign disease. Five patients were defunctioned, and 3 were subsequently reversed. The median height of anastomosis was 12 cm, range 4 - 18 cm from anal verge as measured either intra-operatively, or by rigid sigmoidoscopy post-operatively. Four cases were converted to open surgery. There was 1 post-operative death within 30 days. There was 1 anastomotic leak (the patient that died, and 1 patient developed a colo-vesical fistula. Median post-operative stay was 7 days, range 2-19. Conclusion : This clinical audit confirms that the anastomotic leak rate for left-sided colorectal stapled anastomosis is no

  20. 77 FR 54898 - Certain Polyester Staple Fiber From the People's Republic of China: Final Results of Expedited...

    Science.gov (United States)

    2012-09-06

    ... not coated. Polyester staple fiber is generally used as stuffing in sleeping bags, mattresses, ski... with 19 CFR 351.305. Timely notification of the return of destruction of APO materials or conversion to...

  1. Breeding for wheat quality to assure food security of a staple crop: the case study of Tajikistan

    National Research Council Canada - National Science Library

    Husenov, Bahromiddin; Makhkamov, Marufkul; Gustavsson, Larisa; Muminjanov, Hafiz; Johansson, Eva

    2015-01-01

    Background: This study evaluated options and obstacles to strengthening food security through breeding a staple crop in a developing country, using the case of quality of bread wheat in Tajikistan as an example. Methods...

  2. Laparoscopic sleeve gastrectomy using a synthetic bioabsorbable staple line reinforcement material: Post-operative complications and 6 year outcomes

    Directory of Open Access Journals (Sweden)

    Mahdi Saleh

    2016-09-01

    Conclusion: The synthetic bioabsorbable reinforcement material shows no staple line leaks making it safe to use. LSG as a procedure had a high resolution of obesity-related comorbidities as well as sustainable long-term weight loss.

  3. Lattice photon propagator

    Energy Technology Data Exchange (ETDEWEB)

    Coddington, P.; Hey, A.; Mandula, J.; Ogilvie, M.

    1987-10-22

    The fermion propagator in the Landau gauge is calculated for a U(1) lattice gauge theory. In the confined, strong coupling phase, the propagator resembles that of a massive particle. In the weak coupling phase, the propagator is that of a massless particle. An abrupt change occurs at the transition point. The results are compared to simulations of the gluon propagator in SU(3) lattice gauge theory.

  4. The lattice photon propagator

    Science.gov (United States)

    Coddington, P.; Hey, A.; Mandula, J.; Ogilvie, M.

    1987-10-01

    The photon propagator in the Landau gauge is calculated for a U(1) lattice gauge theory. In the confined, strong coupling phase, the propagator resembles that of a massive particle. In the weak coupling phase, the propagator is that of a massless particle. An abrupt change occurs at the transition point. The results are compared to simulations of the gluon propagator in SU(3) lattice gauge theory.

  5. Staple Food Self-Sufficiency of Farmers Household Level in The Great Solo

    Science.gov (United States)

    Darsono

    2017-04-01

    Analysis of food security level of household is a novelty of measurement standards which usually includes regional and national levels. With household approach is expected to provide the basis of sharp food policy formulation. The purpose of this study are to identify the condition of self-sufficiency in staple foods, and to find the main factors affecting the dynamics of self-sufficiency in staple foods on farm household level in Great Solo. Using primary data from 50 farmers in the sample and secondary data in Great Solo (Surakarta city, Boyolali, Sukoharjo, Karanganyar, Wonogiri, Sragen and Klaten). Compiled panel data were analyzed with linear probability regression models to produce a good model. The results showed that farm households in Great Solo has a surplus of staple food (rice) with an average consumption rate of 96.8 kg/capita/year. This number is lower than the national rate of 136.7 kg/capita/year. The main factors affecting the level of food self-sufficiency in the farmer household level are: rice production, rice consumption, land tenure, and number of family members. Key recommendations from this study are; improvement scale of the land cultivation for rice farming and non-rice diversification consumption.

  6. Is hand sewing comparable with stapling for anastomotic leakage after esophagectomy? A meta-analysis.

    Science.gov (United States)

    Liu, Quan-Xing; Min, Jia-Xin; Deng, Xu-Feng; Dai, Ji-Gang

    2014-12-07

    To compare the outcome of hand sewing and stapling for anastomotic leakage after esophagectomy. A rigorous study protocol was established according to the recommendations of the Cochrane Collaboration. An electronic database search, hand search, and reference search were used to retrieve all randomized controlled trials that compared hand-sewn and mechanical esophagogastric anastomoses. This study included 15 randomized controlled trials with a total of 2337 patients. The results revealed that there was no significant difference in the incidence of anastomotic leakage between the methods [relative risk (RR) = 0.77, 95% confidence interval (CI): 0.57-1.04; P = 0.09], but a subgroup analysis yielded a significant difference for the sutured layer and year of publication (Ps compared with the hand-sewn group (RR = 1.45, 95%CI: 1.11-1.91; P compared with hand sewing. End-to-side stapling increases the risk of anastomotic strictures, but side-to-side stapling decreases the risk.

  7. Staple crops biofortified with increased vitamins and minerals: considerations for a public health strategy.

    Science.gov (United States)

    Garcia-Casal, Maria Nieves; Peña-Rosas, Juan Pablo; Giyose, Boitshepo

    2017-02-01

    Biofortification of staple crops has been proposed as a strategy to address micronutrient malnutrition, particularly with respect to insufficient intake of vitamin A, iron, zinc, and folate. The World Health Organization, in collaboration with the Food and Agriculture Organization of the United Nations and the Sackler Institute for Nutrition Science at the New York Academy of Sciences, convened a technical consultation entitled "Staple Crops Biofortified with Vitamins and Minerals: Considerations for a Public Health Strategy" in April 2016. Participants of the consultation reviewed the definition of biofortification of staple crops, patterns of crops production, processing, consumption, seed varieties, and micronutrient stability and bioavailability, as well as farmers' adoption and acceptability of the modified crops. Also discussed were economic, environmental, safety, and equity aspects of biofortified crops, as well as legal, policy, regulatory, and ethical issues for the implementation of biofortification strategies in agriculture and nutrition. Consultation working groups identified important and emerging technical issues, lessons learned, and research priorities to better support the evidence of improved nutrition and unintended adverse effects of biofortification. This paper provides the background and rationale of the technical consultation, synopsizes the presentations, and provides a summary of the main considerations proposed by the working groups. © 2016 The Authors. Annals of the New York Academy of Sciences published by Wiley Periodicals, Inc. on behalf of New York Academy of Sciences.

  8. LONG TERM RESULTS AFTER STAPLED HEMORRHOIDOPEXY ALONE AND COMPLEMENTED BY EXCISIONAL HEMORRHOIDECTOMY: A RETROSPECTIVE COHORT STUDY.

    Science.gov (United States)

    Araujo, Sergio Eduardo Alonso; Horcel, Lucas de Araujo; Seid, Victor Edmond; Bertoncini, Alexandre Bruno; Klajner, Sidney

    2016-01-01

    Stapled hemorrhoidopexy is associated with less postoperative pain and faster recovery. However, it may be associated with a greater risk of symptomatic recurrence. We hypothesized that undertaking a limited surgical excision of hemorrhoid disease after stapling may be a valid approach for selected patients. To compare long-term results after stapled hemorrhoidopexy with and without complementation with closed excisional technique. In a retrospective uni-institutional cohort study, sixty-five (29 men) patients underwent stapled hemorrhoidopexy and 21 (13 men) underwent stapled hemorrhoidopexy with excision. The same surgeons operated on all cases. Patients underwent stapled hemorrhoidectomy associated with excisional surgery if symptoms attributable to external hemorrhoid piles were observed preoperatively, or if residual prolapse or bulky external disease was observed after the firing of the stapler. A closed excisional diathermy hemorrhoidectomy without vascular ligation was utilized in all complemented cases. All clinical variables were obtained from a questionnaire evaluation obtained through e-mail, telephone interview, or office follow-up. The median duration of postoperative follow-up was 48.5 (6-40) months. Patients with grades 3 and 4 hemorrhoid disease were operated on more frequently using stapled hemorrhoidopexy complemented with excisional technique (95.2% vs. 55.4%, p=0.001). Regarding respectively stapled hemorrhoidopexy and stapled hemorrhoidopexy complemented with excision, there was no difference between the techniques in relation to symptom recurrence (43% and 33%, p=0.45) and median interval between surgery and symptom recurrence (30 (8-84) and 38.8 (8-65) months, p=0.80). Eight (12.3%) patients were re-operated after stapled hemorrhoidopexy and 2 (9.6%), after hemorrhoidopexy with excision (p=0.78). Patient distribution in both groups according to the degree of postoperative satisfaction was similar (p=0.97). Stapled hemorrhoidopexy combined

  9. Expected increase in staple crop imports in water-scarce countries in 2050

    Science.gov (United States)

    Chouchane, Hatem; Krol, Maarten; Hoekstra, Arjen

    2017-04-01

    Water scarcity is a major challenge in the coming decades. The increasing population and the changing pattern of water availability that results from global warming reduce the potential of sufficient food production in many countries over the world. Today, two thirds of the global population are already living under conditions of severe water scarcity at least one month of the year. This rises the importance of addressing the present and future relationship between water availability and food import in water-scarce countries. The net import of staple crops (barley, cassava, maize, millet and products, oats, potatoes, rice, rye, sorghum, soybeans, sweet potatoes, wheat and yams) is analysed in relation to water availability per capita for the period 1961-2010, considering five decadal averages. The relation found is used together with the low, medium and high population growth scenarios from the United Nations to project the staple crops import in water-scarce countries for the year 2050. Additionally, we investigate the uncertainties related to the three population scenarios. Results will help countries to better understand the impact of population growth and limited water resources on their future food trade. This study will provide a valuable supporting tool for policy makers towards more sustainable and water-efficient food production as targeted with the Sustainable Development Goals. Keywords: Water Availability, Food Import, Staple Crops, Water Scarcity, Water-Use Efficiency, Sustainable Development Goals.

  10. Bioavailability of iron, zinc, and provitamin A carotenoids in biofortified staple crops.

    Science.gov (United States)

    La Frano, Michael R; de Moura, Fabiana F; Boy, Erick; Lönnerdal, Bo; Burri, Betty J

    2014-05-01

    International research efforts, including those funded by HarvestPlus, a Challenge Program of the Consultative Group on International Agricultural Research (CGIAR), are focusing on conventional plant breeding to biofortify staple crops such as maize, rice, cassava, beans, wheat, sweet potatoes, and pearl millet to increase the concentrations of micronutrients that are commonly deficient in specific population groups of developing countries. The bioavailability of micronutrients in unfortified staple crops in developing regions is typically low, which raises questions about the efficacy of these crops to improve population micronutrient status. This review of recent studies of biofortified crops aims to assess the micronutrient bioavailability of biofortified staple crops in order to derive lessons that may help direct plant breeding and to infer the potential efficacy of food-based nutrition interventions. Although reducing the amounts of antinutrients and the conduction of food processing generally increases the bioavailability of micronutrients, antinutrients still possess important benefits, and food processing results in micronutrient loss. In general, biofortified foods with relatively higher micronutrient density have higher total absorption rates than nonbiofortified varieties. Thus, evidence supports the focus on efforts to breed plants with increased micronutrient concentrations in order to decrease the influence of inhibitors and to offset losses from processing. © 2014 International Life Sciences Institute.

  11. An enhanced functional interrogation/manipulation of intracellular signaling pathways with the peptide 'stapling' technology.

    Science.gov (United States)

    He, Y; Chen, D; Zheng, W

    2015-11-12

    Specific protein-protein interactions (PPIs) constitute a key underlying mechanism for the presence of a multitude of intracellular signaling pathways, which are essential for the survival of normal and cancer cells. Specific molecular blockers for a crucial PPI would therefore be invaluable tools for an enhanced functional interrogation of the signaling pathway harboring this particular PPI. On the other hand, if a particular PPI is essential for the survival of cancer cells but is absent in or dispensable for the survival of normal cells, its specific molecular blockers could potentially be developed into effective anticancer therapeutics. Due to the flat and extended PPI interface, it would be conceivably difficult for small molecules to achieve an effective blockade, a problem which could be potentially circumvented with peptides or proteins. However, the well-documented proteolytic instability and cellular impermeability of peptides and proteins in general would make their developing into effective intracellular PPI blockers quite a challenge. With the advent of the peptide 'stapling' technology which was demonstrated to be able to stabilize the α-helical conformation of a peptide via bridging two neighboring amino-acid side chains with a 'molecular staple', a linear parent peptide could be transformed into a stronger PPI blocker with enhanced proteolytic stability and cellular permeability. This review will furnish an account on the peptide 'stapling' technology and its exploitation in efforts to achieve an enhanced functional interrogation or manipulation of intracellular signaling pathways especially those that are cancer relevant.

  12. Single-incision laparoscopic partial gastrectomy for gastric submucosal tumors without compromising transumbilical stapling.

    Science.gov (United States)

    Takata, Akihiro; Nakajima, Kiyokazu; Kurokawa, Yukinori; Takahashi, Tsuyoshi; Yamasaki, Makoto; Miyata, Hiroshi; Takiguchi, Shuji; Mori, Masaki; Doki, Yuichiro

    2014-01-01

    Although SILS has become an increasingly popular type of surgery, its application for gastric submucosal tumors (SMT) has been only sporadically reported. We herein describe 12 recent cases with gastric SMT located in the greater curvature or anterior wall. The aim is to validate technical feasibility and safety of single-incision laparoscopic partial gastrectomy. Thus far, this is one of the largest series of patients with gastric SMT who underwent SILS. From July 2009 to April 2013, single-incision laparoscopic partial gastrectomy was attempted in 12 consecutive patients with gastric SMT. Three trocars were assembled in the umbilical incision, and the lesion was mobilized and staple-resected with endoscopic stapling devices. SILS surgery was successfully completed without any additional trocars. The median operating time was 96.5 min, and median blood loss was 7.5 mL. The median tumor size was 30 mm, with histopathologic diagnosis of gastrointestinal stromal tumor (10) and schwannoma (2). There was no immediate postoperative morbidity. During a median follow-up of 12 months, all patients were on full regular diet without any gastrointestinal symptoms. SILS with transumbilical gastric stapling is a safe and practical alternative to conventional multiport laparoscopy in patients with gastric SMT, except for cases originating in the lesser curvature and close to the cardia/ pylorus. © 2013 Japan Society for Endoscopic Surgery, Asia Endosurgery Task Force and Wiley Publishing Asia Pty Ltd.

  13. Staple fixation for akin proximal phalangeal osteotomy in the treatment of hallux valgus interphalangeus.

    Science.gov (United States)

    Neumann, Julie A; Reay, Kathleen D; Bradley, Kendall E; Parekh, Selene G

    2015-04-01

    The Akin proximal phalangeal osteotomy is commonly used in conjunction with metatarsal osteotomies to treat hallux valgus. Multiple fixation methods including suture, wire, screw, and staple fixation have been described. The aims of this study were to assess the intraoperative and postoperative complications and to evaluate short-term postoperative outcomes in patients who underwent Akin osteotomy with staple fixation. Forty-four patients (51 feet) with painful hallux valgus were retrospectively reviewed at an average of 40.4 ± 15.8 (range, 25.9 to 79.9) weeks following an Akin osteotomy with staple fixation. Patient reported preoperative and postoperative Visual Analog Score (VAS) (0 to 10, 0 = no pain) was recorded. Level of activity was reported postoperatively. Hallux valgus angles (HVAs), intermetatarsal angles (IMAs), and hallux valgus interphalangeus angles (IPAs) were evaluated on preoperative as well as final postoperative radiographs. Postoperative clinical and radiographic examinations were used to evaluate for complications. Mean VAS improved from 4.4 ± 2.6 to 1.0 ± 1.2 (P hallux valgus correction with improvement in pain and hallux valgus deformity with a low risk for complications. Level IV, case series. © The Author(s) 2014.

  14. Sound Propagation in the Atmosphere

    Science.gov (United States)

    Attenborough, Keith

    Propagation of sound close to the ground outdoors involves geometric spreading, air absorption, interaction with the ground, barriers, vegetation and refraction associated with wind and temperature gradients. After a brief survey of historical aspects of the study of outdoor sound and its applications, this chapter details the physical principles associated with various propagation effects, reviews data that demonstrate them and methods for predicting them. The discussion is concerned primarily with the relatively short ranges and spectra of interest when predicting and assessing community noise rather than the frequencies and long ranges of concern, for example, in infrasonic global monitoring or used for remote sensing of the atmosphere. Specific phenomena that are discussed include spreading losses, atmospheric absorption, diffraction by barriers and buildings, interaction of sound with the ground (ground waves, surface waves, ground impedance associated with porosity and roughness, and elasticity effects), propagation through crops, shrubs and trees, wind and temperature gradient effects, shadow zones and incoherence due to atmospheric turbulence. The chapter concludes by suggesting a few areas that require further research.

  15. Investigations on the Manufacturing and Mechanical Properties of Spun Yarns Made from Staple CF for Thermoset Composites

    Directory of Open Access Journals (Sweden)

    Hasan Mir Mohammad Badrul

    2017-12-01

    Full Text Available This article reports the results of investigations carried out to produce yarns consisting of staple carbon fiber (CF obtained from process waste for the manufacturing of composites suitable especially for thermoset applications. For this purpose, a comparative analysis is done on processability between 100% staple CF and 60 weight% staple CF mixed with 40 weight% PVA fibers in carding, drawing and spinning process. The hybrid yarns are produced by varying twist level. The PVA fibers of the hybrid yarn are then dissolved using hot water treatment. The mechanical properties of yarns consisting of 100% staple CF and hybrid yarns consisting of staple CF and PVA before and after hot water treatment are investigated. Furthermore, test specimen is also prepared by impregnating 100% staple CF yarn and the hybrid yarns (after the dissolving of PVA with epoxy resin. The results of the tensile test of the yarns in consolidated state reveals that the hybrid yarn produced with 80 T/m after hot water treatment exhibits approximately 75% of the tensile strength of virgin filament tow, and it is expected that the hybrid yarns can be applied for the manufacturing of thermoset based composites for load bearing structures.

  16. Staple foods consumption and irritable bowel syndrome in Japanese adults: a cross-sectional study.

    Directory of Open Access Journals (Sweden)

    Zhaoqiu Zheng

    Full Text Available Carbohydrates can cause gastrointestinal symptoms due to incomplete absorption in the small bowel. Thus, high-carbohydrate diets may induce symptoms of irritable bowel syndrome (IBS.This observational and cross-sectional study assessed the association between consumption of several carbohydrate-enriched staple foods, such as rice, Japanese wheat noodles, Chinese noodles, bread, pasta, and buckwheat noodles, and the prevalence of IBS in Japanese adults.One thousand and eighty-two (837 men Japanese adult employees aged 19-85 were included in this cross-sectional study conducted in 2011. IBS diagnosis was based on the Rome III criteria. Consumption of staple foods was assessed using a brief self-administered diet history questionnaire, and divided into three categories (low, middle, high depending on their distribution.In the multivariate analysis, daily consumption of rice (odds ratios [ORs] and [95% confidence interval (CI]: middle, 1.36 [0.93-1.99]; high, 1.67 [1.12-2.49]; P for trend = 0.01, bread (middle, 1.88 [1.28-2.75]; high, 1.63 [1.10-2.41]; P for trend = 0.01, pasta (middle, 1.47 [1.01-2.15]; high, 1.68 [1.12-2.52]; P for trend = 0.01, and buckwheat noodles (middle, 1.76 [1.18-2.61]; high, 1.98 [1.31-3.00]; P for trend = 0.001 were associated with higher prevalence of IBS after adjustment for socio-demographic, anthropometric, and lifestyle-related factors. Buckwheat noodles, but not other staple foods, retained an association with the prevalence of IBS even after adjustment for daily intake of carbohydrates or plant proteins.This cross-sectional study demonstrated that the consumption of staple foods, such as rice, bread, pasta, and buckwheat noodles is associated with the prevalence of IBS. Of these, the consumption of buckwheat noodles, but not other staple foods, is associated with IBS independent of carbohydrate or plant protein contents.

  17. Sutures versus staples for wound closure in orthopaedic surgery: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Shantz Jesse A

    2012-06-01

    Full Text Available Abstract Background A recently published meta-analysis comparing metallic staples to sutures in orthopaedic procedures revealed three fold increase in risk for infection in stapled wounds. The studies included in the meta-analysis are at risk of bias due to experimental design limitations. A large randomized controlled trial is proposed to direct orthopaedic surgeons in their choice of wound closure material. Methods/Design A parallel group randomized controlled trial with institutional review board approval will be conducted. Patients will be randomized intraoperatively to have skin wounds closed with sutures or staples. Dressings will be used to maintain blinding outcome assessors. The primary outcome measure will be a composite all-cause wound complication outcome measure composed of: infection, wound drainage, wound necrosis, blistering, dehiscence, suture abscess and material sensitivity reaction. An independent review board blinded to treatment assignment will adjudicate suspected complications based on clinical data. All deceased patients will also be reviewed. An interim analysis of complications will take place after half of the patients have been recruited. All data will be analyzed by a blinded statistician. Dichotomous primary and secondary outcome measures will be analyzed using the Chi-squared statistic. Continuous outcome measures will be analyzed using Student's t-test. Subgroup analysis will compare infection rates using sutures versus staples in each anatomic area (upper extremity, pelvis/acetabulum, hip/femur, knee, ankle. A further subgroup analysis will be conducted comparing trauma patients to elective surgery patients. Non-infected revision surgery will also be compared to primary surgery. Discussion Wound closure material is an afterthought for many orthopaedic surgeons. The combined results of several comparative trials suggests that the choice of wound closure materials may have an impact on the rate of surgical site

  18. Sutures versus staples for wound closure in orthopaedic surgery: a randomized controlled trial.

    Science.gov (United States)

    Shantz, Jesse A; Vernon, James; Leiter, Jeff; Morshed, Saam; Stranges, Gregory

    2012-06-06

    A recently published meta-analysis comparing metallic staples to sutures in orthopaedic procedures revealed three fold increase in risk for infection in stapled wounds. The studies included in the meta-analysis are at risk of bias due to experimental design limitations. A large randomized controlled trial is proposed to direct orthopaedic surgeons in their choice of wound closure material. A parallel group randomized controlled trial with institutional review board approval will be conducted. Patients will be randomized intraoperatively to have skin wounds closed with sutures or staples. Dressings will be used to maintain blinding outcome assessors. The primary outcome measure will be a composite all-cause wound complication outcome measure composed of: infection, wound drainage, wound necrosis, blistering, dehiscence, suture abscess and material sensitivity reaction. An independent review board blinded to treatment assignment will adjudicate suspected complications based on clinical data. All deceased patients will also be reviewed. An interim analysis of complications will take place after half of the patients have been recruited. All data will be analyzed by a blinded statistician. Dichotomous primary and secondary outcome measures will be analyzed using the Chi-squared statistic. Continuous outcome measures will be analyzed using Student's t-test. Subgroup analysis will compare infection rates using sutures versus staples in each anatomic area (upper extremity, pelvis/acetabulum, hip/femur, knee, ankle). A further subgroup analysis will be conducted comparing trauma patients to elective surgery patients. Non-infected revision surgery will also be compared to primary surgery. Wound closure material is an afterthought for many orthopaedic surgeons. The combined results of several comparative trials suggests that the choice of wound closure materials may have an impact on the rate of surgical site infections. However, the strength of the evidence is poor given

  19. Kuchler Vegetation

    Data.gov (United States)

    California Department of Resources — Digital version of potential natural plant communites as compiled and published on 'Map of the Natural Vegetation of California' by A. W. Kuchler, 1976. Source map...

  20. Wieslander Vegetation

    Data.gov (United States)

    California Department of Resources — Digital version of the 1945 California Vegetation Type Maps by A. E. Wieslander of the U.S. Forest Service. Source scale of maps are 1:100,000. These compiled maps...

  1. The phase I multicenter trial (STAPLE-1) of the Aptus endovascular repair system: results at 6 months and 1 year.

    Science.gov (United States)

    Deaton, David H; Mehta, Manish; Kasirajan, Karthik; Chaikof, Elliot; Farber, Mark; Glickman, Marc H; Neville, Richard F; Fairman, Ronald M

    2009-04-01

    This phase I IDE study (STAPLE-1) evaluated the primary endpoints of safety (major device-related adverse events at 30 days) and feasibility (successful deployment of all endograft components) of the Aptus Endovascular abdominal aortic aneurysm (AAA) Repair System (Aptus Endosystems, Inc, Sunnyvale, Calif) to treat AAAs. A prospective, single arm Federal Drug Administration (FDA) Phase I IDE study was performed. The Aptus endograft is a three-piece modular device with a flexible unsupported main body and two fully supported limbs in a 5.3 mm outer diameter (OD) (16F) delivery system for all iliac limbs and two of three main body sizes. The largest main body (29 mm diameter) is in a 6 mm (18 F OD) delivery system. EndoStaples measuring 4 mm (length) by 3 mm (diameter) designed to provide transmural graft fixation to the adventitia are applied independent of the endograft delivery system. Inclusion criteria included a proximal aortic neck length of 12 mm and iliac landing zone of 10 mm. Secondary endpoints included freedom from endoleaks, rupture, migration, and device integrity. Twenty-one (21) patients were enrolled at five centers. All patients received the Aptus Endograft and EndoStaples. Ninety-six EndoStaples (range, 2-10; median, 4) were implanted. All patients (n = 21) completed 1-month and 6-month follow-up evaluation and 14 completed 1-year follow-up. Two proximal cuffs and one limb extension were used as adjunctive endograft components at implantation. Three secondary interventions were performed in 2 patients for limb thrombosis. There were no EndoStaple-related adverse events, device integrity failures, migrations, or conversions. These results of the STAPLE-1 trial document the acute safety and feasibility of the Aptus Endograft and EndoStaples. Early follow-up demonstrates excellent 6-month and 1-year results. A pivotal phase II trial is underway at 25 US centers.

  2. Modified Longo's stapled hemorrhoidopexy with additional traction sutures for the treatment of residual prolapsed piles.

    Science.gov (United States)

    Chen, Chuang-Wei; Kang, Jung-Cheng; Wu, Chang-Chieh; Hsiao, Cheng-Wen; Jao, Shu-Wen

    2008-03-01

    Residual prolapsed piles is a problem after the stapled hemorrhoidopexy, especially in large third- or fourth-degree hemorrhoids. We have developed a method using additional traction sutures along with modified Longo's procedure to manage this problem. From January 2005 to October 2005, 30 consecutive patients with symptomatic third- or fourth-degree hemorrhoids who underwent the modified Longo's stapled hemorrhoidopexy with additional traction sutures in a single institution were collected. The demographics, postoperative pain score, surgical features, outcomes, and early and late complications were recorded. All patients were followed for a mean duration of 8.8 (range, 4-15) months. Thirty patients (17 males) with a mean age of 45 (range, 27-63) years were identified. The mean postoperative pain score on the morning of the first postoperative day was 2.8 (range, 1-4). The mean duration of operation was 30.7 (range, 25-37) min. The mean duration of hospital stay was 2 (range, 1-3) days. The mean days for patients to resume normal work was 6.7 (range, 4-9) days. No other procedure-related complications occurred in all patients. There was no early complication except for fecal urgency found in one patient during the first postoperative days. Regarding the late complications, no residual prolapsed piles, persistent anal pain, incontinence, anal stenosis, or recurrent symptoms were found. Our preliminary experiences indicated that this modified procedures truly contributed to reduce the residual internal hemorrhoids and maintained the benefits of stapled hemorrhoidopexy. Randomized trial and long-term follow-up warrant to determine possible surgical and functional outcome.

  3. Breakfast staple types affect brain gray matter volume and cognitive function in healthy children.

    Science.gov (United States)

    Taki, Yasuyuki; Hashizume, Hiroshi; Sassa, Yuko; Takeuchi, Hikaru; Asano, Michiko; Asano, Kohei; Kawashima, Ryuta

    2010-12-08

    Childhood diet is important for brain development. Furthermore, the quality of breakfast is thought to affect the cognitive functioning of well-nourished children. To analyze the relationship among breakfast staple type, gray matter volume, and intelligence quotient (IQ) in 290 healthy children, we used magnetic resonance images and applied voxel-based morphometry. We divided subjects into rice, bread, and both groups according to their breakfast staple. We showed that the rice group had a significantly larger gray matter ratio (gray matter volume percentage divided by intracranial volume) and significantly larger regional gray matter volumes of several regions, including the left superior temporal gyrus. The bread group had significantly larger regional gray and white matter volumes of several regions, including the right frontoparietal region. The perceptual organization index (POI; IQ subcomponent) of the rice group was significantly higher than that of the bread group. All analyses were adjusted for age, gender, intracranial volume, socioeconomic status, average weekly frequency of having breakfast, and number of side dishes eaten for breakfast. Although several factors may have affected the results, one possible mechanism underlying the difference between the bread and the rice groups may be the difference in the glycemic index (GI) of these two substances; foods with a low GI are associated with less blood-glucose fluctuation than are those with a high GI. Our study suggests that breakfast staple type affects brain gray and white matter volumes and cognitive function in healthy children; therefore, a diet of optimal nutrition is important for brain maturation during childhood and adolescence.

  4. Breakfast staple types affect brain gray matter volume and cognitive function in healthy children.

    Directory of Open Access Journals (Sweden)

    Yasuyuki Taki

    Full Text Available Childhood diet is important for brain development. Furthermore, the quality of breakfast is thought to affect the cognitive functioning of well-nourished children. To analyze the relationship among breakfast staple type, gray matter volume, and intelligence quotient (IQ in 290 healthy children, we used magnetic resonance images and applied voxel-based morphometry. We divided subjects into rice, bread, and both groups according to their breakfast staple. We showed that the rice group had a significantly larger gray matter ratio (gray matter volume percentage divided by intracranial volume and significantly larger regional gray matter volumes of several regions, including the left superior temporal gyrus. The bread group had significantly larger regional gray and white matter volumes of several regions, including the right frontoparietal region. The perceptual organization index (POI; IQ subcomponent of the rice group was significantly higher than that of the bread group. All analyses were adjusted for age, gender, intracranial volume, socioeconomic status, average weekly frequency of having breakfast, and number of side dishes eaten for breakfast. Although several factors may have affected the results, one possible mechanism underlying the difference between the bread and the rice groups may be the difference in the glycemic index (GI of these two substances; foods with a low GI are associated with less blood-glucose fluctuation than are those with a high GI. Our study suggests that breakfast staple type affects brain gray and white matter volumes and cognitive function in healthy children; therefore, a diet of optimal nutrition is important for brain maturation during childhood and adolescence.

  5. Vertebral body stapling: a fusionless treatment option for a growing child with moderate idiopathic scoliosis.

    Science.gov (United States)

    Betz, Randal R; Ranade, Ashish; Samdani, Amer F; Chafetz, Ross; D'Andrea, Linda P; Gaughan, John P; Asghar, Jahangir; Grewal, Harsh; Mulcahey, Mary Jane

    2010-01-15

    Retrospective review. To report the results of vertebral body stapling (VBS) with minimum 2-year follow-up in patients with idiopathic scoliosis. While bracing for idiopathic scoliosis is moderately successful, its efficacy has been called into question, and it carries associated psychosocial ramifications. VBS has been shown to be a safe, feasible alternative to bracing for idiopathic scoliosis. We retrospectively reviewed 28 of 29 patients (96%) with idiopathic scoliosis treated with VBS followed for a minimum of 2 years. Risser sign of 0 or 1 and coronal curve measuring between 20 degrees and 45 degrees . There were 26 thoracic and 15 lumbar curves. Average follow-up was 3.2 years. The procedure was considered a success if curves corrected to within 10 degrees of preoperative measurement or decreased >10 degrees . Thoracic curves measuring 50% correction on bend film had a success rate of 71.4%. Of the 26 curves, 4 (15%) showed correction >10 degrees. Kyphosis improved in 7 patients with preoperative hypokyphosis (10 degrees. Major complications include rupture of a unrecognized congenital diaphragmatic hernia and curve overcorrection in 1 patient. Two minor complications included superior mesenteric artery syndrome and atelectasis due to a mucous plug. There were no instances of staple dislodgement or neurovascular injury. Analysis of patients with idiopathic scoliosis (IS) with high-risk progression treated with vertebral body stapling (VBS) and minimum 2-year follow-up shows a success rate of 87% in all lumbar curves and in 79% of thoracic curves 35 degrees were not successful and require alternative treatments.

  6. Tackling agriculturally relevant diseases in the staple crop cassava (Manihot esculenta).

    Science.gov (United States)

    McCallum, Emily J; Anjanappa, Ravi B; Gruissem, Wilhelm

    2017-08-01

    Cassava is an important staple food crop for millions of people in tropical regions across Africa, South America and Asia. Viral, bacterial and fungal diseases impact cassava yield in all three regions. The viruses causing cassava mosaic disease and cassava brown streak disease have been particularly devastating to cassava production in Africa. Improved farming practices and disease monitoring can reduce the impact of cassava diseases in the field. The availability of disease resistant cassava varieties developed through breeding or genetic engineering is key to tackling disease incidence and severity. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Calculation of Differential Propagation Constant Determined by Plant Morphology Using Polarimetric Measurement

    Directory of Open Access Journals (Sweden)

    Chufeng Hu

    2014-01-01

    Full Text Available The morphology of vegetation greatly impacts propagation of polarized electromagnetic wave. In order to validate this phenomenon, the mathematical relation between the differential propagation constant of forest vegetation and of its polarized echo is quantitatively derived by using backscattering power profile. The fluctuation of differential propagation constant with frequency is analyzed by combining the morphological characteristics of vegetation. The accurate copolarized data of 3–10 GHz frequency-domain of small trees are obtained by indoor wideband polarimetric measurement system. The results show that morphological characteristics of vegetation at different frequencies can be obtained by the differential propagation constant of polarized electromagnetic wave. At low frequencies, the plants with structural features presented oriented distribution. However, the plants show random distribution of the echoes at higher frequencies, which is mainly from the canopy. The research provides important information to choose the coherence models employed in the parameters retrieval of vegetations.

  8. A Systematic Review of Systematic Reviews and Panoramic Meta-Analysis: Staples versus Sutures for Surgical Procedures

    Science.gov (United States)

    Hemming, Karla; Pinkney, Thomas; Futaba, Kay; Pennant, Mary; Morton, Dion G.; Lilford, Richard J.

    2013-01-01

    Objective To systematically evaluate the evidence across surgical specialties as to whether staples or sutures better improve patient and provider level outcomes. Design A systematic review of systematic reviews and panoramic meta-analysis of pooled estimates. Results Eleven systematic reviews, including 13,661 observations, met the inclusion criteria. In orthopaedic surgery sutures were found to be preferable, and for appendicial stump sutures were protective against both surgical site infection and post surgical complications. However, staples were protective against leak in ilecolic anastomosis. For all other surgery types the evidence was inconclusive with wider confidence intervals including the possibly of preferential outcomes for surgical site infection or post surgical complication for either staples or sutures. Whilst reviews showed substantial variation in mean differences in operating time (I2 94%) there was clear evidence of a reduction in average operating time across all surgery types. Few reviews reported on length of stay, but the three reviews that did (I2 0%, including 950 observations) showed a non significant reduction in length of stay, but showed evidence of publication bias (P-value for Egger test 0.05). Conclusions Evidence across surgical specialties indicates that wound closure with staples reduces the mean operating time. Despite including several thousand observations, no clear evidence of superiority emerged for either staples or sutures with respect to surgical site infection, post surgical complications, or length of stay. PMID:24116028

  9. Sound propagation in cities

    NARCIS (Netherlands)

    Salomons, E.; Polinder, H.; Lohman, W.; Zhou, H.; Borst, H.

    2009-01-01

    A new engineering model for sound propagation in cities is presented. The model is based on numerical and experimental studies of sound propagation between street canyons. Multiple reflections in the source canyon and the receiver canyon are taken into account in an efficient way, while weak

  10. Spread spectrum propagation prediction

    Science.gov (United States)

    Luebbers, Raymond

    1989-02-01

    In order to efficiently model effects of terrain on wideband radio signals, several basic improvements to the Geometrical Theory of Diffraction (GTD) propagation model were made. As a result of this effort a terrain sensitive propagation model capable of predicting the wideband channel transfer function, including the important channel characterization parameters, has been developed and validated against measurements.

  11. Propagation of Significant Figures.

    Science.gov (United States)

    Schwartz, Lowell M.

    1985-01-01

    Shows that the rules of thumb for propagating significant figures through arithmetic calculations frequently yield misleading results. Also describes two procedures for performing this propagation more reliably than the rules of thumb. However, both require considerably more calculational effort than do the rules. (JN)

  12. A question of balance: achieving appropriate nutrient levels in biofortified staple crops.

    Science.gov (United States)

    Sanahuja, Georgina; Farré, Gemma; Berman, Judit; Zorrilla-López, Uxue; Twyman, Richard M; Capell, Teresa; Christou, Paul; Zhu, Changfu

    2013-12-01

    The biofortification of staple crops with vitamins is an attractive strategy to increase the nutritional quality of human food, particularly in areas where the population subsists on a cereal-based diet. Unlike other approaches, biofortification is sustainable and does not require anything more than a standard food-distribution infrastructure. The health-promoting effects of vitamins depend on overall intake and bioavailability, the latter influenced by food processing, absorption efficiency and the utilisation or retention of the vitamin in the body. The bioavailability of vitamins in nutritionally enriched foods should ideally be adjusted to achieve the dietary reference intake in a reasonable portion. Current vitamin biofortification programmes focus on the fat-soluble vitamins A and E, and the water-soluble vitamins C and B9 (folate), but the control of dosage and bioavailability has been largely overlooked. In the present review, we discuss the vitamin content of nutritionally enhanced foods developed by conventional breeding and genetic engineering, focusing on dosage and bioavailability. Although the biofortification of staple crops could potentially address micronutrient deficiency on a global scale, further research is required to develop effective strategies that match the bioavailability of vitamins to the requirements of the human diet.

  13. A Simple and Safe Procedure to Repair Rectal Prolapse Perineally Using Stapling Devices

    Directory of Open Access Journals (Sweden)

    Fumitake Hata

    2014-01-01

    Full Text Available Rectal prolapses are not life-threatening, however the bleeding and fecal incontinence associated with them significantly erode quality of life and can cause concern among patients' caregivers in nursing homes. Many procedures have been reported that repair rectal prolapses, and the procedure used depends on the severity of the prolapse; however, the treatments are yet to be established. Here we report a simple and safe procedure to repair rectal prolapse perineally using stapling devices. We performed this procedure on 5 patients within a short time. All patients were followed up for over 24 months and none had any recurrences of their rectal prolapses. No complications occurred during the operations and postoperative periods. Most patients who have prolapses are elderly and fragile, so the treatment must be easy, safe, and rapid. While rectal prolapse is not life-threatening, the goal of treatment is to alleviate its symptoms. The procedure we describe is consistent with this concept. We suggest that this procedure, which uses surgical stapling devices, might be a better option for the treatment of complete rectal prolapse. We will continue to surgically correct complete rectal prolapses and investigate the long-term outcomes of the procedure.

  14. Temporary hemiepiphysiodesis for idiopathic genua valga in adolescents: percutaneous transphyseal screws (PETS) versus stapling.

    Science.gov (United States)

    De Brauwer, Veerle; Moens, Pierre

    2008-01-01

    Genua valga are not merely a cosmetic problem but also predispose to gonarthrosis in adult life. In our retrospective study of 25 patients, we reviewed our present technique of medial hemiepiphysiodesis using percutaneous screws and compared it with our own results of stapling. Clinical evaluation was performed by estimation of the intermalleolar distance, radiological assessment by measuring the hip-knee-ankle angle until skeletal maturity. Average chronological age at the time of surgery was 14.5 years for boys and 12.7 years for girls. Average bone age (main indicator for timing of surgery) was 14.3 years for boys and 12.8 years for girls. There is an average rebound phenomenon after removal of the screws of 2 degrees in one third of our patients. In another third of our patients' population, however, we observed a progression of correction of an average of 2 degrees. More than 90% of the patients were satisfied. None received revision surgery. There was only one person with an uncosmetic scar. Percutaneous screws as treatment of idiopathic genua valga in children seem to be as safe and reliable as stapling but are a less invasive and a more cosmetic treatment.

  15. Transgenic Biofortification of the Starchy Staple Cassava (Manihot esculenta) Generates a Novel Sink for Protein

    Science.gov (United States)

    Abhary, Mohammad; Siritunga, Dimuth; Stevens, Gene; Taylor, Nigel J.; Fauquet, Claude M.

    2011-01-01

    Although calorie dense, the starchy, tuberous roots of cassava provide the lowest sources of dietary protein within the major staple food crops (Manihot esculenta Crantz). (Montagnac JA, Davis CR, Tanumihardjo SA. (2009) Compr Rev Food Sci Food Saf 8:181–194). Cassava was genetically modified to express zeolin, a nutritionally balanced storage protein under control of the patatin promoter. Transgenic plants accumulated zeolin within de novo protein bodies localized within the root storage tissues, resulting in total protein levels of 12.5% dry weight within this tissue, a fourfold increase compared to non-transgenic controls. No significant differences were seen for morphological or agronomic characteristics of transgenic and wild type plants in the greenhouse and field trials, but relative to controls, levels of cyanogenic compounds were reduced by up to 55% in both leaf and root tissues of transgenic plants. Data described here represent a proof of concept towards the potential transformation of cassava from a starchy staple, devoid of storage protein, to one capable of supplying inexpensive, plant-based proteins for food, feed and industrial applications. PMID:21283593

  16. Transgenic biofortification of the starchy staple cassava (Manihot esculenta) generates a novel sink for protein.

    Science.gov (United States)

    Abhary, Mohammad; Siritunga, Dimuth; Stevens, Gene; Taylor, Nigel J; Fauquet, Claude M

    2011-01-25

    Although calorie dense, the starchy, tuberous roots of cassava provide the lowest sources of dietary protein within the major staple food crops (Manihot esculenta Crantz). (Montagnac JA, Davis CR, Tanumihardjo SA. (2009) Compr Rev Food Sci Food Saf 8:181-194). Cassava was genetically modified to express zeolin, a nutritionally balanced storage protein under control of the patatin promoter. Transgenic plants accumulated zeolin within de novo protein bodies localized within the root storage tissues, resulting in total protein levels of 12.5% dry weight within this tissue, a fourfold increase compared to non-transgenic controls. No significant differences were seen for morphological or agronomic characteristics of transgenic and wild type plants in the greenhouse and field trials, but relative to controls, levels of cyanogenic compounds were reduced by up to 55% in both leaf and root tissues of transgenic plants. Data described here represent a proof of concept towards the potential transformation of cassava from a starchy staple, devoid of storage protein, to one capable of supplying inexpensive, plant-based proteins for food, feed and industrial applications.

  17. The new oil order : the post staples paradigm and the Canadian upstream oil and gas industry

    Energy Technology Data Exchange (ETDEWEB)

    Brownsey, K. [Mount Royal College, Calgary, AB (Canada)

    2007-01-15

    Domestic exploration and investment in oil and gas production has reached unprecedented levels in Canada. This paper described the Canadian oil and gas sector's shift from a staples industry to a capital-intensive mature, post-staples industry with secure and expanding markets. The paper evaluated the shift from conventional to unconventional sources of energy, and described the evolution of the Canadian oil and gas industry from its colonial beginnings to the nationalization of oil and gas. Issues related to the Kyoto Protocol and energy efficiency were also reviewed. The paper argued that the integration of North American energy markets in the oil and gas sector is an important aspect in the future development of Alberta's oil sands region. However, offshore boundary and tax disputes continue to impede the development of Canada's Atlantic oil and gas resources. Aboriginal and provincial support for a gas pipeline in the Northwest Territories has meant that natural gas from the Arctic may soon be available to North American markets. It was concluded that while oil and gas producing provinces are enjoying the benefits of high prices, they remain hostile to increased federal intervention. 30 refs.

  18. Vector wave propagation method.

    Science.gov (United States)

    Fertig, M; Brenner, K-H

    2010-04-01

    In this paper, we extend the scalar wave propagation method (WPM) to vector fields. The WPM [Appl. Opt.32, 4984 (1993)] was introduced in order to overcome the major limitations of the beam propagation method (BPM). With the WPM, the range of application can be extended from the simulation of waveguides to simulation of other optical elements like lenses, prisms and gratings. In that reference it was demonstrated that the wave propagation scheme provides valid results for propagation angles up to 85 degrees and that it is not limited to small index variations in the axis of propagation. Here, we extend the WPM to three-dimensional vectorial fields (VWPMs) by considering the polarization dependent Fresnel coefficients for transmission in each propagation step. The continuity of the electric field is maintained in all three dimensions by an enhanced propagation vector and the transfer matrix. We verify the validity of the method by transmission through a prism and by comparison with the focal distribution from vectorial Debye theory. Furthermore, a two-dimensional grating is simulated and compared with the results from three-dimensional RCWA. Especially for 3D problems, the runtime of the VWPM exhibits special advantage over the RCWA.

  19. The gluon propagator

    Science.gov (United States)

    Mandula, Jeffrey E.

    1999-07-01

    We discuss the current state of what is known non-perturbatively about the gluon propagator in QCD, with emphasis on the information coming from lattice simulations. We review specification of the lattice Landau gauge and the procedure for calculating the gluon propagator on the lattice. We also discuss some of the difficulties in non-perturbative calculations - especially Gribov copy issues. We trace the evolution of lattice simulations over the past dozen years, emphasizing how the improvement in computations has led not only to more precise determinations of the propagator, but has allowed more detailed information about it to be extracted.

  20. Shore Stabilization with Salt Marsh Vegetation.

    Science.gov (United States)

    1983-01-01

    result from the action of tidal currents. Marsh plantings as veil as estab- lished marshes are particularly vulnerable to undermining by strong tidal...Annual Confewence on the Reetoiation of CoaetaZ Vegetation in Flor -ida, R.R. Lewis, ed., 1975, pp. 132-161. TERNYIK, W.E., "Pilot Propagation of

  1. Thoracoscopic vertebral body stapling for treatment of scoliosis in young children.

    Science.gov (United States)

    Laituri, Carrie A; Schwend, Richard M; Holcomb, George W

    2012-10-01

    The management of juvenile idiopathic scoliosis (JIS) in young children can be challenging. Vertebral body stapling (VBS) is a new alternate to bracing and is intended to reduce or eliminate the need for subsequent spinal fusion. In concept, VBS of the anterior spine inhibits curve progression, thus stabilizing the spine as the child grows. There is a paucity of data in the pediatric population on its effectiveness. Therefore, we reviewed our experience with thoracoscopic VBS in children with juvenile scoliosis. After Institutional Review Board approval was obtained, a retrospective study was conducted on all patients who underwent thoracoscopic VBS for scoliosis from January 2007 to December 2010. Only patients with a follow-up of at least 2 years were included in this study group. Data obtained were demographics, indications for VBS, degree of curvature, treatment, complications, and follow-up. Cobb angle was used to measure the initial degree of curvature on a standing posterior-anterior spine radiograph. During the study period, 11 patients underwent thoracoscopic VBS for JIS using single lung ventilation in a lateral position. Of those, 7 patients ages 8-11 years (mean, 9 years) with a mean body mass index of 17 kg/m(2) (±2.9 kg/m(2)) had at least a 2-year follow-up and make up the study group for this review. Indications for stapling in these 7 patients were progression of scoliosis (n=3), noncompliance with brace (n=3), and double curve with progression (n=1). The mean preoperative Cobb angle was 34.1±5° (range, 25°-41°), and the mean immediate postoperative Cobb angle was 23±5° (range, 16°-30°). The staples encompassed a mean number of 6.4 vertebral bodies. The mean duration of chest drainage was 2.7 days (range, 2-6 days), and the mean length of hospitalization was 3.9 days (range, 3-7 days). The mean operative time was 156.2±39.5 minutes (range, 101-214 minutes). There were no intraoperative complications or mortality. Postoperatively, 1

  2. Evaluating the synchronicity in yield variations of staple crops at global scale

    Science.gov (United States)

    Yokozawa, M.

    2014-12-01

    Reflecting the recent globalization trend in world commodity market, several major production countries are producing large amount of staple crops, especially, maize and soybean. Thus, simultaneous crop failure (abrupt reduction in crop yield, lean year) due to extreme weather and/or climate change could lead to unstable food supply. This study try to examine the synchronicity in yield variations of staple crops at global scale. We use a gridded crop yields database, which includes the historical year-to-year changes in staple crop yields with a spatial resolution of 1.125 degree in latitude/longitude during a period of 1982-2006 (Iizumi et al. 2013). It has been constructed based on the agriculture statistics issued by local administrative bureaus in each country. For the regions being lack of data, an interpolation was conducted to obtain the values referring to the NPP estimates from satellite data as well as FAO country yield. For each time series of the target crop yield, we firstly applied a local kernel regression to represent the long-term trend component. Next, the deviations of yearly yield from the long-term trend component were defined as ΔY(i, y) in year y at grid i. Then, the correlation of deviation between grids i and j in year y is defined as Cij(y) = ΔY(i, y) ΔY(j, y). In addition, Pij = represents the time-averaged correlation of deviation between grids i and j. Bracket means the time average operation over 25 years (1982-2006). As the results, figures show the time changes in the number of grid pairs, in which both the deviation are negative. It represent the time changes in ratio of the grid pairs where both crop yields synchronically decreased to the total grid pairs. The years denoted by arrows in the figures indicate the case that all the ratios of three country pairs (i.e. China-USA, USA-Brazil and Brazil-China) are relatively larger (>0.6 for soybean and >0.5 for maize). This suggests that the reductions in crop yield occurred

  3. Bamboo in vitro propagation

    National Research Council Canada - National Science Library

    Yudith García- Ramírez; Marisol Freire-Seijo; Ortelio Hurtado

    2011-01-01

    ... the social problems of the countryside in Cuba. Traditional bamboo propagation is affected by long intervals of flowering, the limited stock of plant material, the low percentages of rooting and the limited existence of propagules...

  4. The nutritional significance of root and tuber crop development as staples in the Caribbean community.

    Science.gov (United States)

    Omawale

    1979-09-01

    The competition between cereals and root crops as CARICOM staples is described. The move to substitute locally grown food for imported wheat is shown to favor root crop development in the region. Against this background, traditional nutrition-prompted objections to wheat substitution by root crops are examined. Evidence is cited to show the essential adequacy of protein in root crops, except plantain and cassava and for all humans except perhaps some infants. The low protein in cassava and plantain, it is proposed, can be easily overcome in the process of local root crop development. Finally, it is argued that there exists the potential to obtain cheap calories from root crops. This and the generation of economic activity among small farmers, concomitant with root crop development, are seen as possible indicators of good nutrition for the region in the future.

  5. Suppression of Breast Cancer Metastasis Using Stapled Peptides Targeting the WASF Regulatory Complex

    Directory of Open Access Journals (Sweden)

    John K Cowell

    2017-06-01

    Full Text Available The WASF3 gene facilitates the metastatic phenotype, and its inactivation leads to suppression of invasion and metastasis regardless of the genetic background of the cancer cell. This reliance on WASF3 to facilitate metastasis suggests that targeting its function could serve as an effective strategy to suppress metastasis. WASF3 stability and function are regulated by the WASF Regulatory Complex (WRC of proteins, particularly CYFIP1 and NCKAP1. Knockdown of these proteins in vitro leads to disruption of the WRC and suppression of invasion. We have used mouse xenograft models of breast cancer metastasis to assess whether targeting the WRC complex suppresses metastasis in vivo. Stapled peptides targeting the WASF3-CYFIP1 interface (WAHM1 and the CYFIP1-NCKAP1 interface (WANT3 suppress the development of lung and liver metastases. Targeting these critical protein-protein interactions, therefore, could potentially be developed into a therapeutic strategy to control cancer cell invasion and metastasis.

  6. Mycotoxins and cyanogenic glycosides in staple foods of three indigenous people of the Colombian Amazon.

    Science.gov (United States)

    Diaz, Gonzalo J; Krska, Rudolf; Sulyok, Michael

    2015-01-01

    A study was conducted to determine the incidence and levels of mycotoxins in the main staple foods of three indigenous people of the Colombian Amazon. A total of 20 corn, 24 rice and 59 cassava samples were analysed by a multi-analyte liquid chromatography-tandem mass spectrometry method covering the major classes of mycotoxins. In addition, cassava samples were also analysed for cyanogenic glycosides. The indigenous Amazon communities tested are exposed to potentially carcinogenic mycotoxins (particularly aflatoxins), as well as other mycotoxins, mainly through the intake of locally grown corn. Citrinin content in this corn was unusually high and has not been reported elsewhere. Two cassava samples contained high levels of cyanogenic glycosides. It is strongly recommended not to grow corn in the Amazon but instead purchase it from vendors capable of guaranteeing mycotoxin levels below the maximum allowable concentration in Colombia.

  7. Thirty-seven patients treated with the C-seal : protection of stapled colorectal anastomoses with a biodegradable sheath

    NARCIS (Netherlands)

    Morks, Annelien N.; Havenga, Klaas; Hoedemaker, Henk O. ten Cate; Leijtens, Jeroen W. A.; Ploeg, Rutger J.

    2013-01-01

    The present study was performed to get a better insight in the incidence of anastomotic leakage leading to reintervention when using the C-seal: a biodegradable sheath that protects the stapled colorectal anastomosis from leakage. The C-seal is a thin walled tube-like sheath that forms a protective

  8. Canada's resource economy in transition : the past, present, and future of Canadian staples industries

    Energy Technology Data Exchange (ETDEWEB)

    Howlett, M. [Simon Fraser Univ., Burnaby, BC (Canada). Dept. of Political Science; Brownsey, K. [Mount Royal College, Calgary, AB (Canada). Dept. of Policy Studies] (eds.)

    2008-07-01

    This book examined changes in contemporary Canadian primary resource staples-driven political economies. It referred to the period of transition in which sectors moved from older models of staples development to post-staples modes of production. Specialists provided overviews of past and present developments of principal primary stables economies and discussed issues that are now changing modes of production. Subjects included genetically modified foods; aquaculture; forest certification; the participation of First Nations and other communities in mining project developments; and the growth of the offshore oil and gas industry. The book demonstrated that all sectors followed a similar pattern of rapid growth followed by resource depletion. Sectors now face additional challenges due to more complex regulatory and production environments. Challenges include determining appropriate levels of environmental protection, integrating high technology inputs, and successfully navigating free trade treaties and open competition. The book was divided into the following 5 main sections: (1) an introduction; (2) the post-staples state in theory and practice; (3) consumption industries : agriculture and the fisheries; (4) extraction industries : minerals and forests; and (5) transmission industries : oil and gas and water. refs., tabs., figs.

  9. Factors Predictive of Outcomes in Vertebral Body Stapling for Idiopathic Scoliosis.

    Science.gov (United States)

    Cahill, Patrick J; Auriemma, Michael; Dakwar, Elias; Gaughan, John P; Samdani, Amer F; Pahys, Joshua M; Betz, Randal R

    2018-01-01

    Retrospective review. To identify factors associated with successful outcomes in patients treated with vertebral body stapling (VBS) for idiopathic scoliosis. The standard of care for moderate scoliosis (20°-45°) consists of observation and bracing with the goal of halting curve progression. Although several recent studies have confirmed the efficacy of bracing in altering the natural history of scoliosis, bracing is not universally effective. Recent studies have demonstrated that VBS is a safe and viable treatment for some young patients with scoliosis at risk for progression. The identification of factors associated with successful outcomes in VBS for idiopathic scoliosis would better define the population likely to benefit from VBS. We retrospectively reviewed all patients from a single institution treated with VBS who met previously defined inclusion criteria. Successful treatment was defined as avoidance of a fusion and a final Cobb angle no more than 10° greater than the pretreatment Cobb angle. We identified 63 patients who met inclusion criteria. The patients underwent VBS at a mean age of 10.78 years and had a mean follow-up of 3.62 years (minimum 2 years). The mean pre-op Cobb angle for stapled thoracic curves was 29.5°. Seventy-four percent of the patients who had VBS of the thoracic curve have avoided progression and/or fusion, and the mean Cobb angle at most recent follow-up was 21.8°. The mean preoperative Cobb angle for lumbar curves was 31.1°. Eighty-two percent of the patients who had VBS of the lumbar curve have avoided progression and/or fusion, and their mean Cobb angle at follow-up was 21.6°. VBS is effective at preventing progression and fusion for moderate idiopathic scoliosis in immature patients. The complication rates are low. Copyright © 2017 Scoliosis Research Society. Published by Elsevier Inc. All rights reserved.

  10. A modified stapling technique for the repair of an aneurysmal autogenous arteriovenous fistula.

    Science.gov (United States)

    Tozzi, Matteo; Franchin, Marco; Ietto, Giuseppe; Soldini, Gabriele; Chiappa, Corrado; Carcano, Giulio; Castelli, Patrizio; Piffaretti, Gabriele

    2014-10-01

    An alternative surgical technique for the repair an aneurysmatic arteriovenous fistula (AVF) using a staple remodeling operation has been developed and the results are reported. All patients presenting with an aneurysmatic autogenous AVF of the upper extremities between January 2012 and December 2013 were included in the analysis. The AVF was approached laterally along the entire aneurysm and then remodeled using a stapler on the lateral side of the vein wall. All stenotic segments were excised. Follow-up included a clinical visit and echo color Doppler of the fistula and was performed 7, 15, and 30 days after the intervention and every 6 months thereafter. We treated 14 patients (nine men [64.3%]) with a median age of 65 years (interquartile range [IQR], 62.5-69 years). Elective interventions were performed in 12 patients (85.7%), and two underwent emergency treatment because of postcannulation bleeding. Technical success was achieved in all cases. The mean duration of the intervention was 75 minutes (IQR, 61.15-83.45 minutes). No in-hospital deaths or major morbidities were observed. Median hospitalization time was 24 hours (IQR, 25-38 hours). Postoperative puncture was performed after a median delay of 12.5 hours (IQR, 12-17 hours). No patient was lost during the follow-up, which was a median of 16.5 months (IQR, 14-23 months). Primary functional patency was 12 of 14 (85.7%). Pseudoaneurysm, bleeding, hematoma, or infection was not observed. In our experience, the stapling technique proved to be easy, fast, and safe. Early follow-up outcomes showed excellent primary patency and confirmed the effectiveness of the technique because local complications were never observed. Copyright © 2014 Society for Vascular Surgery. Published by Elsevier Inc. All rights reserved.

  11. Impact of stapling devices on radical cystectomy: comparative study between low- and high-volume surgeons.

    Science.gov (United States)

    Tzortzis, Vassilios; Gravas, Stavros; Mitsogiannis, Iraklis C; Moutzouris, Georgios; Karatzas, Anastasios; Leventis, Angelos; Mpouzalas, Ioannis; Melekos, Michael D

    2008-02-01

    To compare effectiveness in terms of blood loss and operative time of stapling devices among surgeons with different levels of surgical volume. We evaluated a group of 29 male patients with invasive bladder cancer who underwent radical cystectomy by two groups of surgeons. The first group included two high-volume surgeons, and the second group two low-volume surgeons. All cystectomies were performed using the multifire autosuture articulated vascular Endo-GIA. We compared patients with a series of 28 patients who had undergone radical cystectomy during the same period using standard technique by the same surgeons. Blood loss was defined as the difference between the hemoglobin at the beginning and at the end of cystectomy. In the group of high-volume surgeons, the mean operative time was 81.4 +/- 17 minutes and 79.3 +/- 20 minutes for the classical and stapler arm, respectively (P = 0.551). In the low-volume surgeons group, the mean operative time was 114.3 +/- 22 minutes and 92.4 +/- 12 minutes for the two methods (P = 0.003). The mean intraoperative blood loss in the experienced surgeons was 2.3 +/- 0.82 g/dL and 1.49 +/- 0.66 g/dL for the classical and stapler arm, respectively (P = 0.008). In the group of low-volume surgeons, the difference in hemoglobin was 3.02 +/- 0.84 g/dL and 1.91 +/- 0.6 g/dL for the two methods (P = 0.02). Stapling devices seem to make cystectomy safer and faster in surgeons with different surgical volumes. The group of low-volume surgeons benefited more.

  12. Sexuality and fertility outcomes after hand sewn versus stapled ileal pouch anal anastomosis for ulcerative colitis.

    Science.gov (United States)

    Harnoy, Yann; Desfourneaux, Véronique; Bouguen, Guillaume; Rayar, Michel; Meunier, Bernard; Siproudhis, Laurent; Boudjema, Karim; Sulpice, Laurent

    2016-01-01

    Ileal pouch anal anastomosis (IPAA) may alter sexuality and fertility in women. The laparoscopic approach seems to reduce infertility rates in women after IPAA. However, the impact of hand sewn versus stapled IPAA on sexuality and fertility has never been assessed in patients with ulcerative colitis (UC). The objective of this study was to analyze the impact of the IPAA technique on sexuality and fertility in UC. All UC patients who underwent an IPAA between May 1996 and April 2011 were included. The patients answered mailed questionnaires including sexuality validated questionnaires and fertility questionnaires. The risk factors of sexual dysfunction were explored. A total of 135 patients were included. Eighty-eight patients (65%) answered the questionnaires. Their mean age and follow-up were 37.2 ± 13.4 y and 109.7 ± 57.5 mo. The rates of female and male sexual dysfunction were 50% and 29%, respectively. Intestinal transit disorders were identified as risk factors in both men and women and anastomotic stricture in women sexual dysfunction, in univariate analyses. The IPAA technique did not impact sexual function in women but there was a trend for less erectile dysfunction after hand sewn IPAA (16.7% versus 44.4%). The fertility rate was 47% in women and 75% in men, with a trend for a better fertility in women after hand sewn IPAA (P = 0.07). In this preliminary study, the hand sewn or stapled IPAA technique did not impact the sexuality or fertility outcomes of UC patients, but there was a trend for better female fertility and male erectile function after hand sewn IPAA. Intestinal transit disorders contributed to male and female sexual dysfunction after IPAA. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. A Systematic Review of Perennial Staple Crops Literature Using Topic Modeling and Bibliometric Analysis.

    Directory of Open Access Journals (Sweden)

    Daniel A Kane

    Full Text Available Research on perennial staple crops has increased in the past ten years due to their potential to improve ecosystem services in agricultural systems. However, multiple past breeding efforts as well as research on traditional ratoon systems mean there is already a broad body of literature on perennial crops. In this review, we compare the development of research on perennial staple crops, including wheat, rice, rye, sorghum, and pigeon pea. We utilized the advanced search capabilities of Web of Science, Scopus, ScienceDirect, and Agricola to gather a library of 914 articles published from 1930 to the present. We analyzed the metadata in the entire library and in collections of literature on each crop to understand trends in research and publishing. In addition, we applied topic modeling to the article abstracts, a type of text analysis that identifies frequently co-occurring terms and latent topics. We found: 1. Research on perennials is increasing overall, but individual crops have each seen periods of heightened interest and research activity; 2. Specialist journals play an important role in supporting early research efforts. Research often begins within communities of specialists or breeders for the individual crop before transitioning to a more general scientific audience; 3. Existing perennial agricultural systems and their domesticated crop material, such as ratoon rice systems, can provide a useful foundation for breeding efforts, accelerating the development of truly perennial crops and farming systems; 4. Primary research is lacking for crops that are produced on a smaller scale globally, such as pigeon pea and sorghum, and on the ecosystem service benefits of perennial agricultural systems.

  14. Breeding for micronutrients in staple food crops from a human nutrition perspective.

    Science.gov (United States)

    Welch, Ross M; Graham, Robin D

    2004-02-01

    Over three billion people are currently micronutrient (i.e. micronutrient elements and vitamins) malnourished, resulting in egregious societal costs including learning disabilities among children, increased morbidity and mortality rates, lower worker productivity, and high healthcare costs, all factors diminishing human potential, felicity, and national economic development. Nutritional deficiencies (e.g. iron, zinc, vitamin A) account for almost two-thirds of the childhood death worldwide. Most of those afflicted are dependent on staple crops for their sustenance. Importantly, these crops can be enriched (i.e. 'biofortified') with micronutrients using plant breeding and/or transgenic strategies, because micronutrient enrichment traits exist within their genomes that can to used for substantially increasing micronutrient levels in these foods without negatively impacting crop productivity. Furthermore, 'proof of concept' studies have been published using transgenic approaches to biofortify staple crops (e.g. high beta-carotene 'golden rice' grain, high ferritin-Fe rice grain, etc). In addition, micronutrient element enrichment of seeds can increase crop yields when sowed to micronutrient-poor soils, assuring their adoption by farmers. Bioavailability issues must be addressed when employing plant breeding and/or transgenic approaches to reduce micronutrient malnutrition. Enhancing substances (e.g. ascorbic acid, S-containing amino acids, etc) that promote micronutrient bioavailability or decreasing antinutrient substances (e.g. phytate, polyphenolics, etc) that inhibit micronutrient bioavailability, are both options that could be pursued, but the latter approach should be used with caution. The world's agricultural community should adopt plant breeding and other genetic technologies to improve human health, and the world's nutrition and health communities should support these efforts. Sustainable solutions to this enormous global problem of 'hidden hunger' will not

  15. Vegetative propagation of twelve fodder tree species indigenous to ...

    African Journals Online (AJOL)

    ... Commiphora africana, Faidherbia albida, Ficus gnaphalocarpa, Guiera senegalensis, Kigelia africana, Pterocarpus erinaceus, Pterocarpus lucens, Pterocarpus santalinoides and Terminalia avicennioides. The series also evaluated the impacts of the size (a. africanantalinoides was revealed to be an easy-to-root species, ...

  16. Vegetative propagation of Cinnamomum camphora L. Presl by shoot ...

    African Journals Online (AJOL)

    The study was carried out to determine shoot physiological age of the camphor tree that would promote root initiation and cuttings performance. Hundred shoot cuttings of similar diameter (0.9 cm) were selected for each shoot physiological age. The first 10 cm from the apex of the shoot was considered softwood, 10 cm from ...

  17. Review of vegetative propagation of cacao ( Theobroma cacao L ...

    African Journals Online (AJOL)

    Important among the external factors affecting rooting of cacao cuttings are light, temperature, humidity, and the air-moisture relations of the rooting media. The most ... The need is for an effective manipulation of the external environment and a wider exploitation of some technical factors to improve on rooting in cacao.

  18. Vegetative propagation of Syringa vulgaris L. in vitro.

    NARCIS (Netherlands)

    Pierik, R.L.M.; Steegmans, H.H.M.; Elias, A.A.; Stiekema, O.T.J.; Velde, van der A.J.

    1988-01-01

    Excised shoot tips from adult Syringa vulgaris L. plants were rejuvenated by repeated subculturing in vitro. The number of subcultures required to rejuvenate the shoots was strongly dependent on the age and genotype of the plant material. Three rootstocks (K8, A2 and A3) and 5 cultivars

  19. Review of vegetative propagation of cacao ( Theobroma cacao L ...

    African Journals Online (AJOL)

    However, a clear relationship is noted between the position of cutting on the stock plant and rooting performance; rooting potential increases from the apex to the base of the shoot. Single-node cuttings take longer time to root than multinode cuttings. The physiological condition of cacao cuttings changes with changing ...

  20. Research Note Early survival and growth of vegetatively propagated ...

    African Journals Online (AJOL)

    Tuft area differed between species. The often-invasive species E. curvula had the highest average survival rate and the largest tuft area. The often-dominant, unpalatable Aristida junciformis demonstrated surprisingly low survival and growth rates. Themeda triandra and Tristachya leucothrix, species often dominating ...

  1. Tacks, staples, or suture: method of peritoneal closure in laparoscopic transabdominal preperitoneal inguinal hernia repair effects early quality of life.

    Science.gov (United States)

    Ross, Samuel W; Oommen, Bindhu; Kim, Mimi; Walters, Amanda L; Augenstein, Vedra A; Heniford, B Todd; Todd Heniford, B

    2015-07-01

    TAPP inguinal hernia repair (IHR) entails the development of a peritoneal flap (PF) in order to reduce the hernia sac and create a preperitoneal space in which to place mesh. Many methods for closure of the PF exist including sutures, tacks, and staples. We hypothesized that patients who had PF closure with suture would have better short-term QOL outcomes. A prospective institutional hernia-specific database was queried for all adult, TAPP IHRs from July 2012 to August 2013. Unilateral and bilateral patients were included and each hernia was analyzed separately. The main outcome of interest was quality of life (QOL) at two- and four-week follow-up, as measured by the Carolinas Comfort Scale. There were 227 patients who underwent TAPP, with 99 bilateral and 128 unilateral IHR, for a total of 326 IHR. PF closure was performed using tacks in 45.1%, suture in 19.0%, and staples in 35.9%. Patient characteristics were statistically similar between the tack, suture, and staple group. There were 32.9% direct, 46.5% indirect, and 20.6% pantaloon hernias, which were not significantly different when compared by PF closure method. Post-operative complications and length of stay were same for the three groups. There were no hernia recurrences. Post-operative activity limitation at two weeks was significantly better in the suture group when compared to the stapled group (p = 0.005). Additionally, sutured PF closure had less early post-operative pain when compared to the tack group (p = 0.038). Following TAPP IHR, suture closure of the PF significantly improves 2-week post-operative movement limitation compared to stapled and tacked PF closure. Continued randomized studies are needed to determine the best surgical hernia repair methods for ideal post-op QOL.

  2. Antiviral Activity of Dual-acting Hydrocarbon-stapled Peptides against HIV-1 Predominantly Circulating in China.

    Science.gov (United States)

    Wang, Yan; Curreli, Francesca; Xu, Wei Si; Li, Zhen Peng; Kong, De Sheng; Ren, Li; Hong, Kun Xue; Jiang, Shi Bo; Shao, Yi Ming; Debnath, Asim K; Ma, Li Ying

    2017-06-01

    New rationally designed i,i+7-hydrocarbon-stapled peptides that target both HIV-1 assembly and entry have been shown to have antiviral activity against HIV-1 subtypes circulating in Europe and North America. Here, we aimed to evaluate the antiviral activity of these peptides against HIV-1 subtypes predominantly circulating in China. The antiviral activity of three i,i+7-hydrocarbon-stapled peptides, NYAD-36, NYAD-67, and NYAD-66, against primary HIV-1 CRF07_BC and CRF01_AE isolates was evaluated in peripheral blood mononuclear cells (PBMCs). The activity against the CRF07_BC and CRF01_AE Env-pseudotyped viruses was analyzed in TZM-bl cells. We found that all the stapled peptides were effective in inhibiting infection by all the primary HIV-1 isolates tested, with 50% inhibitory concentration toward viral replication (IC50) in the low micromolar range. NYAD-36 and NYAD-67 showed better antiviral activity than NYAD-66 did. We further evaluated the sensitivity of CRF01_AE and CRF07_BC Env-pseudotyped viruses to these stapled peptides in a single-cycle virus infectivity assay. As observed with the primary isolates, the IC50s were in the low micromolar range, and NYAD-66 was less effective than NYAD-36 and NYAD-67. Hydrocarbon-stapled peptides appear to have broad antiviral activity against the predominant HIV-1 viruses in China. This finding may provide the impetus to the rational design of peptides for future antiviral therapy. Copyright © 2017 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  3. Flowering, post-pollination development and propagation of Ebolo ...

    African Journals Online (AJOL)

    A study of Crassocephalum crepidioides, a green leafy vegetable mainly collected from the wild in Nigeria and other parts of Africa, was conducted in order to elucidate flowering, postpollination developments, seed production and germination potential of the plant and investigate the eligibility of other propagation methods.

  4. Procedure of brewing alcohol as a staple food: case study of the fermented cereal liquor ?Parshot? as a staple food in Dirashe special woreda, southern Ethiopia

    OpenAIRE

    Sunano, Yui

    2015-01-01

    Abstract For most brews, alcohol fermentation and lactic fermentation take place simultaneously during the brewing process, and alcohol fermentation can progress smoothly because the propagation of various microorganisms is prevented by lactic fermentation. It is not necessary to cause lactic fermentation with a thing generated naturally and intentionally. The people living in the Dirashe area in southern Ethiopia drink three types of alcoholic beverages that are prepared from cereals. From t...

  5. Turbofan Duct Propagation Model

    Science.gov (United States)

    Lan, Justin H.; Posey, Joe W. (Technical Monitor)

    2001-01-01

    The CDUCT code utilizes a parabolic approximation to the convected Helmholtz equation in order to efficiently model acoustic propagation in acoustically treated, complex shaped ducts. The parabolic approximation solves one-way wave propagation with a marching method which neglects backwards reflected waves. The derivation of the parabolic approximation is presented. Several code validation cases are given. An acoustic lining design process for an example aft fan duct is discussed. It is noted that the method can efficiently model realistic three-dimension effects, acoustic lining, and flow within the computational capabilities of a typical computer workstation.

  6. Propagation of waves

    CERN Document Server

    David, P

    2013-01-01

    Propagation of Waves focuses on the wave propagation around the earth, which is influenced by its curvature, surface irregularities, and by passage through atmospheric layers that may be refracting, absorbing, or ionized. This book begins by outlining the behavior of waves in the various media and at their interfaces, which simplifies the basic phenomena, such as absorption, refraction, reflection, and interference. Applications to the case of the terrestrial sphere are also discussed as a natural generalization. Following the deliberation on the diffraction of the "ground? wave around the ear

  7. In vitro propagation of jojoba.

    Science.gov (United States)

    Llorente, Berta E; Apóstolo, Nancy M

    2013-01-01

    Jojoba (Simmondsia chinensis (Link) Schn.) is a nontraditional crop in arid and semi-arid areas. Vegetative propagation can be achieved by layering, grafting, or rooting semi-hardwood cuttings, but the highest number of possible propagules is limited by the size of the plants and time of the year. Micropropagation is highly recommended strategy for obtaining jojoba elite clones. For culture initiation, single-node explants are cultivated on Murashige and Skoog medium (MS) supplemented with Gamborg's vitamins (B5), 11.1 μM BA (N(6)-benzyl-adenine), 0.5 μM IBA (indole-3-butyric acid), and 1.4 μM GA(3) (gibberellic acid). Internodal and apical cuttings proliferate on MS medium containing B5 vitamins and 4.4 μM BA. Rooting is achieved on MS medium (half strength mineral salt) amended with B5 vitamins and 14.7 μM IBA during 7 days and transferred to develop in auxin-free rooting medium. Plantlets are acclimatized using a graduated humidity regime on soil: peat: perlite (5:1:1) substrate. This micropagation protocol produces large numbers of uniform plants from selected genotypes of jojoba.

  8. Flood Wave Propagation

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 5. Flood Wave Propagation-The Saint Venant Equations. P P Mujumdar. General Article Volume 6 Issue 5 May 2001 pp 66-73. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/006/05/0066-0073 ...

  9. Uncertainty Propagation in OMFIT

    Science.gov (United States)

    Smith, Sterling; Meneghini, Orso; Sung, Choongki

    2017-10-01

    A rigorous comparison of power balance fluxes and turbulent model fluxes requires the propagation of uncertainties in the kinetic profiles and their derivatives. Making extensive use of the python uncertainties package, the OMFIT framework has been used to propagate covariant uncertainties to provide an uncertainty in the power balance calculation from the ONETWO code, as well as through the turbulent fluxes calculated by the TGLF code. The covariant uncertainties arise from fitting 1D (constant on flux surface) density and temperature profiles and associated random errors with parameterized functions such as a modified tanh. The power balance and model fluxes can then be compared with quantification of the uncertainties. No effort is made at propagating systematic errors. A case study will be shown for the effects of resonant magnetic perturbations on the kinetic profiles and fluxes at the top of the pedestal. A separate attempt at modeling the random errors with Monte Carlo sampling will be compared to the method of propagating the fitting function parameter covariant uncertainties. Work supported by US DOE under DE-FC02-04ER54698, DE-FG2-95ER-54309, DE-SC 0012656.

  10. Outcomes of resection for rectal cancer in India: The impact of the double stapling technique

    Directory of Open Access Journals (Sweden)

    Ahire Sanjay B

    2007-03-01

    Full Text Available Abstract Background The introduction of circular staplers into colorectal surgery has revolutionized anastomotic techniques stretching the limits of sphincter preservation. Data on the double-stapling technique (DST has been widely published in the West where the incidence of colorectal cancer is high. However studies using this technique and their results, in the Indian scenario, as well as the rest of Asia, have been few and far between. Aim To evaluate the feasibility of the DST in Indian patients with low rectal cancers and assess its impact on anastomotic leak rates, covering colostomy rates, level of resection and morbidity in patients undergoing low anterior resection (LAR. Methods A comparative analysis was performed between retrospectively acquired data on 78 patients (mean age 53.2 ± 13.5 years undergoing LAR with the single-stapling technique (SST (between January 1999 and December 2001 and prospective data acquired on 138 LARs (mean age 50.3 ± 13.9 years performed using the DST (between January 2003 – December 2005. Results A total of 77 out of 78 patients in the SST group had Astler Coller B and C disease while the number was 132/138 in the DST group. The mean distance of the tumor from anal verge was 7.6 cm (2.5–15 cm and 8.0 cm (4–15 cm in the DST and SST groups, respectively. In the DST group, there were 5 (3.6% anastomotic failures and 62 (45% covering stomas compared to 7 (8.9% anastomotic failures and 51 (65.4% covering stomas in the SST group. The anastomotic leak rate, though objectively lower in the DST group, did not attain statistical significance (p = 0.12. Covering stoma rates were significantly lower in DST group (p = 0.006. There was 1 death in the DST group due to cardiac causes (unrelated to the anastomosis and no mortality in the SST group. The LAR and abdominoperineal resection (APR rates were 40% and 60%, respectively, during 1999–2001. In 2005, these rates were 55% and 45%, respectively. Conclusion

  11. A Database for Propagation Models

    Science.gov (United States)

    Kantak, Anil V.; Rucker, James

    1997-01-01

    The Propagation Models Database is designed to allow the scientists and experimenters in the propagation field to process their data through many known and accepted propagation models. The database is an Excel 5.0 based software that houses user-callable propagation models of propagation phenomena. It does not contain a database of propagation data generated out of the experiments. The database not only provides a powerful software tool to process the data generated by the experiments, but is also a time- and energy-saving tool for plotting results, generating tables and producing impressive and crisp hard copy for presentation and filing.

  12. Development of microsatellite markers for Fargesia denudata (Poaceae), the staple-food bamboo of the giant panda.

    Science.gov (United States)

    Lv, Yan; Yu, Tao; Lu, Sihai; Tian, Cheng; Li, Junqing; Du, Fang K

    2016-06-01

    There is a need for microsatellite primers to analyze genetic parameters of Fargesia denudata (Poaceae), the staple-food bamboo of the giant panda (Ailuropoda melanoleuca). Using next-generation sequencing technology, we obtained a 75-Mb assembled sequence of F. denudata and identified 182 microsatellites. Primer pairs for 70 candidate microsatellite markers were selected and validated in four individuals, and 42 primer pairs generated reliable amplicons. Fourteen of 16 tested markers were found to be polymorphic in 72 individuals from four F. denudata populations. The number of alleles ranged from two to 19 per locus; the observed and expected heterozygosities ranged from 0 to 1 and from 0 to 0.87, respectively. The transferability of these 16 novel microsatellite markers was validated in five related species. These markers will be useful for examining the genetic diversity, genetic structure, and cloning of F. denudata, the staple-food bamboo of the giant panda, and related bamboo species.

  13. Outcomes of laparoscopic proximal gastrectomy with esophagojejunal reconstruction for chronic staple line disruption after laparoscopic sleeve gastrectomy.

    Science.gov (United States)

    Thompson, Charles E; Ahmad, Hira; Lo Menzo, Emanuele; Szomstein, Samuel; Rosenthal, Raul J

    2014-01-01

    Sleeve gastrectomy is now a frequently performed bariatric procedure for severely obese patients and may have the lowest frequency of short-term or long-term complications. The aim of this study is to describe our experience in managing chronic proximal leaks with a proximal gastrectomy and Roux-en-Y esophagojejunostomy (PGEJ). A retrospective review was performed of all patients having proximal chronic staple-line disruptions (CSLD) after undergoing laparoscopic sleeve gastrectomy. Fifteen patients had proximal CSLD and were treated with PGEJ. There was 1 (6.6%) releak in this group, which resolved with nonoperative treatment. Other postoperative morbidities in this series included partial small bowel obstruction (n = 1) and subhepatic bile collection (n = 1), both of which resolved without operative intervention. PGEJ appears to be a safe and effective procedure for chronic staple-line disruptions after sleeve gastrectomy. © 2014 American Society for Bariatric Surgery Published by American Society for Metabolic and Bariatric Surgery All rights reserved.

  14. Influência da fonte material e do tempo de cura na propagação vegetativa da pitaya vermelha (Hylocereus undatus Haw Influence of the material source and the cicatrize time in vegetative propagation of red dragon fruit (Hylocereus undatus Haw

    Directory of Open Access Journals (Sweden)

    Renata Aparecida de Andrade

    2007-04-01

    Full Text Available A pitaya vermelha é uma cactácea cujos frutos são de interesse comercial crescente por produtores e consumidores. No entanto, ainda há diversos aspectos sobre seu cultivo que precisam ser elucidados, proporcionando rentabilidade ao produtor. Diante disso, realizou-se o presente trabalho, que teve como objetivo obter informações quanto à propagação vegetativa desta fruteira, utilizando-se de diferentes fontes de material em função do tempo de cura. O experimento foi realizado no Ripado de Fruticultura, pertencente ao Departamento de Produção Vegetal da Faculdade de Ciências Agrárias e Veterinárias - Unesp - Câmpus de Jaboticabal-SP, utilizando estacas de plantas de pitaya de diferentes origens (planta adulta, estacas de brotações de plantas adultas recém-enraizadas e planta em início de desenvolvimento, originária de semente, submetidas a 3 períodos de cura: 0; 7 e 14 dias. As avaliações foram quanto a: enraizamento; volume de raiz; comprimento da maior raiz (cm; massas fresca e seca das raízes (gramas; número e tamanho das brotações nas estacas (cm. Foram realizadas 5 repetições, com 10 estacas cada, totalizando 150 estacas de cada material. Nas condições em que o experimento foi realizado, pode-se concluir que a estaquia deve ser realizada tão logo feita a segmentação dos cladódios e que as estacas obtidas de brotações de plantas recém-enraizadas apresentam melhores resultados.The red dragon fruit has been a great incresing commercial interest for the producers and the consumers. However, there are still several aspects on its cultivation that need to be elucidated, providing profitability to the producer. The present work was done with the objective of getting information about the vegetative propagation of this fruitful, using different sources of material in function of the cicatrize time. The research was carried out in the lath house of Unesp - São Paulo State University - Campus of Jaboticabal

  15. Diâmetro de estacas e substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg Diameter of cuttings and substrates in the vegetative propagation of maniçoba Manihot glaziovii Muell. Arg

    Directory of Open Access Journals (Sweden)

    Leonardo Elias Ferreira

    2010-09-01

    Full Text Available Objetivou-se com este trabalho estudar a influência do diâmetro das estacas e dos substratos na propagação vegetativa de maniçoba, Manihot glaziovii Muell. Arg. Utilizou-se o delineamento em blocos casualizados em esquema fatorial 10 x 3, sendo 10 substratos e 3 diâmetros de estacas, totalizando 30 tratamentos, oriundos das combinações entre substratos e diâmetros de estacas, com 4 repetições e 8 estacas por parcela. Os diâmetros das estacas corresponderam a: 0,5 a 1,0 cm (D1; 1,1 a 2,0 cm (D2 e 2,1 a 3,0 cm (D3. Foram utilizados 10 substratos: terra (S1; areia (S2; terra+areia: 1:1 (S3; terra+areia: 2:1 (S4; terra+areia: 1:2 (S5; terra+esterco: 1:1 (S6; areia+esterco: 1:1 (S7; terra+esterco: 2:1 (S8; areia+esterco: 2:1 (S9 e terra+areia+esterco: 1:1:1 (S10. As estacas lenhosas foram retiradas de plantas matrizes em repouso vegetativo, com comprimento de 25 cm e base cortada em bisel. Avaliou-se: percentual de estacas enraizadas; número de raízes; número de brotações; diâmetro e comprimento das brotações; número de folhas; massa seca das brotações e massa seca das raízes, obtidos aos 70 dias após instalação do experimento. Os melhores resultados para todas as variáveis estudadas foram obtidos com estacas de diâmetros entre 1,1 a 2,0 cm e entre 2,1 a 3,0 cm, com substratos que incluíram areia + esterco na sua composição. Tais tratamentos proporcionaram percentagens de enraizamento da ordem de 70 a 80%.This study aims to evaluate substrates and cuttings diameter influence in the vegetative propagation of Manihot glaziovii Muell.Arg. A design in randomized blocks using a 10 x 3 factorial scheme was used, being 10 substrates and 3 cuttings diameter, totaling 30 treatments, from the combinations between substrates and cuttings diameter, with 4 replications and 8 cuttings per plot. Diameters corresponded: 0.5 to 1.0 cm (D1; 1.1 to 2.0 cm (D2 and 2.1 to 3.0 cm (D3. Substrates used were: soil (S1; sand (S2; soil + sand: 1

  16. Lake Bathymetric Aquatic Vegetation

    Data.gov (United States)

    Minnesota Department of Natural Resources — Aquatic vegetation represented as polygon features, coded with vegetation type (emergent, submergent, etc.) and field survey date. Polygons were digitized from...

  17. Propagating Instabilities in Solids

    Science.gov (United States)

    Kyriakides, Stelios

    1998-03-01

    Instability is one of the factors which limit the extent to which solids can be loaded or deformed and plays a pivotal role in the design of many structures. Such instabilities often result in localized deformation which precipitates catastrophic failure. Some materials have the capacity to recover their stiffness following a certain amount of localized deformation. This local recovery in stiffness arrests further local deformation and spreading of the instability to neighboring material becomes preferred. Under displacement controlled loading the propagation of the transition fronts can be achieved in a steady-state manner at a constant stress level known as the propagation stress. The stresses in the transition fronts joining the highly deformed zone to the intact material overcome the instability nucleation stresses and, as a result, the propagation stress is usually much lower than the stress required to nucleate the instability. The classical example of this class of material instabilities is L/"uders bands which tend to affect mild steels and other metals. Recent work has demonstrated that propagating instabilities occur in several other materials. Experimental and analytical results from four examples will be used to illustrate this point: First the evolution of L=FCders bands in mild steel strips will be revisited. The second example involves the evolution of stress induced phase transformations (austenite to martensite phases and the reverse) in a shape memory alloy under displacement controlled stretching. The third example is the crushing behavior of cellular materials such as honeycombs and foams made from metals and polymers. The fourth example involves the axial broadening/propagation of kink bands in aligned fiber/matrix composites under compression. The microstructure and, as a result, the micromechanisms governing the onset, localization, local arrest and propagation of instabilities in each of the four materials are vastly different. Despite this

  18. Parameter Data on the Radiocesium Transfer to Korean Staple Food Crops Following a Nuclear Accident

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Yong-Ho; Lim, Kwang-Muk; Jun, In; Kim, Byung-Ho; Keum, Dong-Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In order to decide an optimum countermeasure against farmland contaminations following a severe NPP accident, it is necessary to have a reliable tool for predicting the concentrations of radiocesium in crop plants. For the estimation of radionuclide concentrations in crop plants, various transfer parameters, which quantify the radionuclide transfer from one compartment to the next, are used in general. Some amount of transfer parameter data has been produced at the Korea Atomic Energy Research Institute (KAERI) over the last 30 years. The present work was conducted to collate the KAERI data on radiocesium in staple food crops and to suggest effective ways of using them for assessing the environmental impact of a nuclear accident. The transfer parameter values of radiocesium for rice, Chinese cabbage and radish varied considerably with soils and times of its deposition. The proposed representative values were mostly based on a limited amount of data so they cannot be considered to have a high representativeness. Accordingly, they are intended for provisional use and a continuous improvement should be made. It is necessary to produce a sufficient amount of additional domestic data on the indirect pathway by conducting root-uptake experiments with as many types of soil as possible.

  19. Vertebral Body Stapling versus Bracing for Patients with High-Risk Moderate Idiopathic Scoliosis.

    Science.gov (United States)

    Cuddihy, Laury; Danielsson, Aina J; Cahill, Patrick J; Samdani, Amer F; Grewal, Harsh; Richmond, John M; Mulcahey, M J; Gaughan, John P; Antonacci, M Darryl; Betz, Randal R

    2015-01-01

    We report a comparison study of vertebral body stapling (VBS) versus a matched bracing cohort for immature patients with moderate (25 to 44°) idiopathic scoliosis (IS). 42 of 49 consecutive patients (86%) with IS were treated with VBS and followed for a minimum of 2 years. They were compared to 121 braced patients meeting identical inclusion criteria. 52 patients (66 curves) were matched according to age at start of treatment (10.6 years versus 11.1 years, resp. [P = 0.07]) and gender. For thoracic curves 25-34°, VBS had a success rate (defined as curve progression VBS and bracing both had a poor success rate. For lumbar curves, success rates were similar in both groups for curves measuring 25-34°. In this comparison of two cohorts of patients with high-risk (Risser 0-1) moderate IS (25-44°), in smaller thoracic curves (25-34°) VBS provided better results as a clinical trend as compared to bracing. VBS was found not to be effective for thoracic curves ≥35°. For lumbar curves measuring 25-34°, results appear to be similar for both VBS and bracing, at 80% success.

  20. Extracorporeal staple technique: an alternative approach to the treatment of critical colostomy stenosis

    Science.gov (United States)

    Skokowski, Jarosław; Kalinowska, Aleksandra

    2015-01-01

    We describe an extracorporeal staple technique used to treat severe colostomy stenosis under analgo-sedation, thus avoiding relaparotomy. The surgery is performed under short-term sedation. The orifice of the stoma is widened and overgrowing skin is excised. The volume and diameter of the stoma are assessed. The anvil of a circular stapler device is inserted into the lumen of the colostomy. First bowel layers and then skin are closed with purse-string sutures. One firing of the stapler is used to reshape the stoma. The procedure takes around 20–30 min. One circular stapler is used. The patient can be discharged the same day or a day after surgery. No complications were noted in operated patients. At 6- and 12-month follow-ups, a slight narrowing of the colostomy was visible, but no recurrence of the stricture was noted. The described technique is an interesting, easy and safe alternative to previous methods of treatment for stenosed end-colostomy. Importantly, it is an extra-abdominal procedure and may be offered to patients with a history of multiple abdominal operations or with serious coexisting medical conditions in the one-day surgery setting. PMID:26240635

  1. Stapled transanal rectal resection for obstructed defecation syndrome associated with rectocele and rectal intussusception

    Science.gov (United States)

    Zhang, Bin; Ding, Jian-Hua; Yin, Shu-Hui; Zhang, Meng; Zhao, Ke

    2010-01-01

    AIM: To evaluate the safety and efficacy of stapled transanal rectal resection (STARR), and to analyze the outcome of the patients 12-mo after the operation. METHODS: From May 2007 to October 2008, 50 female patients with rectocele and/or rectal intussusception underwent STARR. The preoperative status, perioperative and postoperative complications at baseline, 3, 6 and 12-mo were assessed. Data were collected prospectively from standardized questionnaires for the assessment of constipation [constipation scoring system, Longo’s obstructed defecation syndrome (ODS) score system, symptom severity score], patient satisfaction (visual analogue scale), and quality of life (Patient Assessment of Constipation-Quality of Life Questionnaire). RESULTS: At a 12-mo follow-up, significant improvement in the constipation scoring system, ODS score system, symptom severity score, visual analog scale and quality of life (P < 0.0001) was observed. The symptoms of constipation improved in 90% of patients at 12 mo after surgery. The self-reported definitive outcome was excellent in 15 (30%) patients, fairly good in 8 (16%), good in 22 (44%), and poor in 5 (10%). CONCLUSION: STARR can be performed safely without major morbidity. Moreover, the procedure seems to be effective for patients with obstructed defecation associated with symptomatic rectocele and rectal intussusception. PMID:20503455

  2. Is hand-sewn anastomosis superior to stapled anastomosis following oesophagectomy?

    Science.gov (United States)

    Kayani, Babar; Garas, George; Arshad, Mubarik; Athanasiou, Thanos; Darzi, Ara; Zacharakis, Emmanouil

    2014-01-01

    A best evidence topic was written according to a structured protocol. The question addressed was: In patients undergoing oesophagectomy is stapled anastomosis (STA) superior to hand-sewn anastomosis (HSA) with respect to post-operative outcomes. In total, 82 papers were found suitable using the reported search and 14 of these represented the best evidence to answer the clinical question. The authors, date, journal, study type, population, main outcome measures and results are tabulated. Existing evidence shows that STA is associated with reduced time to anastomotic construction and decreased intra-operative blood loss but increased risk of benign stricture formation compared to HSA. There is no difference between HSA and STA with respect to cardiac or respiratory complications, anastomotic leakage, duration of hospital admission or 30-day mortality. In HSA, increasing surgical experience and intra-operative air leakage testing after anastomotic creation are associated with reduced risk of anastomotic leakage. Further adequately powered studies will enable identification of other local and systemic factors influencing anastomotic healing, which will lead to improved patient and anastomotic technique selection for optimal surgical outcomes. Copyright © 2013. Published by Elsevier Ltd.

  3. Integrated Approaches for the Management of Staple Line Leaks following Sleeve Gastrectomy

    Directory of Open Access Journals (Sweden)

    Mauro Montuori

    2017-01-01

    Full Text Available Introduction. Aim of the study was trying to draw a final flow chart for the management of gastric leaks after laparoscopic sleeve gastrectomy, based on the review of our cases over 10 years’ experience. Material and Methods. We retrospectively reviewed all patients who underwent LSG as a primary operation at the Bariatric Unit of Tor Vergata University Hospital in Rome from 2007 to 2015. Results. Patients included in the study were 418. There were 6 staple line leaks (1.44%. All patients with diagnosis of a leak were initially discharged home in good clinical conditions and then returned to A&E because of the complication. The mean interval between surgery and readmission for leak was 13,4 days (range 6–34 days, SD ± 11.85. We recorded one death (16.67% due to sepsis. The remaining five cases were successfully treated with a mean healing time of the gastric leak of 55,5 days (range 26–83 days; SD ± 25.44. Conclusion. Choosing the proper treatment depends on clinical stability and on the presence or not of collected abscess. Our treatment protocol showed being associated with low complication rate and minor discomfort to the patients, reducing the need for more invasive procedures.

  4. Stapled peptide inhibitors of RAB25 target context-specific phenotypes in cancer | Office of Cancer Genomics

    Science.gov (United States)

    Recent evidence has established a role for the small GTPase RAB25, as well as related effector proteins, in enacting both pro-oncogenic and anti-oncogenic phenotypes in specific cellular contexts. Here we report the development of all-hydrocarbon stabilized peptides derived from the RAB-binding FIP-family of proteins to target RAB25. Relative to unmodified peptides, optimized stapled peptides exhibit increased structural stability, binding affinity, cell permeability, and inhibition of RAB25:FIP complex formation.

  5. Vacuum suction fixation versus staple fixation in TAPP laparoscopic hernia repair: introduction of a new technique for mesh fixation.

    Science.gov (United States)

    Zhang, Guangyong; Zhang, Xiang; Zhan, Hanxiang; Hu, Sanyuan

    2016-01-01

    Proper mesh fixation is critical for successful TAPP laparoscopic hernia repair. Conventional mesh fixation may cause chronic neuralgia, groin paresthesia or other complications. This study aimed at introducing a new vacuum suction technique for mesh fixation and evaluating its efficacy and safety compared with traditional staple fixation way. Clinical data of 242 patients undergoing TAPP from July 2011 to March 2014 were retrospectively analyzed. Patients were divided into vacuum suction fixation group and staple fixation group. The operation time, hospital stay, complications, recurrence, visual analogue scale pain score and cost were evaluated. All surgeries were successful. The operation time of staple group was (42.34 ± 10.15) min for unilateral hernia and (64.08 ± 16.01) min for bilateral hernias. The postoperative hospital stay was (2.76 ± 0.84) days. One recurrence was observed (0.90%). For vacuum group, the operation time was (42.66 ± 7.76) min and (63.92 ± 10.49) min, and hospital stay was (2.60 ± 0.74) days. No recurrence was observed. There was no significant difference in recurrence, operation time, postoperative pain and hospital stay between two groups (P > 0.05). Average cost were (11,714 ± 726) RMB for vacuum group which was lower than staple group (14,837 ± 1568) RMB (P 0.05). Both techniques for mesh fixation are safe and effective. There is no significant difference in recurrence, operation time, postoperative pain or hospital stay. The vacuum suction fixation technique is more economical with lower incidence of scrotal emphysema.

  6. Comparison between stainless steel staples and silk sutures for primary closure of skin in patients undergoing neck dissection: A comparative clinical study

    National Research Council Canada - National Science Library

    Nagaraj, Vaibhav; Rajkumar, GC; Ghosh, Abhishek; Nanjappa, Madan

    2015-01-01

    ..., economy and aesthetics of the resultant scar. Aim: (1) To compare surgical stainless steel staples and silk sutures for primary wound closure, with respect to presence/absence of wound infection and dehiscence (2...

  7. Comparison between stainless steel staples and silk sutures for primary closure of skin in patients undergoing neck dissection: A comparative clinical study

    National Research Council Canada - National Science Library

    Ghosh, Abhishek; Nanjappa, Madan; Nagaraj, Vaibhav; Rajkumar, G C

    2015-01-01

    ..., economy and aesthetics of the resultant scar. (1) To compare surgical stainless steel staples and silk sutures for primary wound closure, with respect to presence/absence of wound infection and dehiscence (2...

  8. Perioperative outcome of laparoscopic left lateral liver resection is improved by using a bioabsorbable staple line reinforcement material in a porcine model

    NARCIS (Netherlands)

    Consten, Esther C. J.; Dakin, Gregory F.; Robertus, Jan-Lukas; Bardaro, Sergio; Milone, Luca; Gagner, Michel

    Hypothesis Laparoscopic liver surgery is significantly limited by the technical difficulty encountered during transection of substantial liver parenchyma, with intraoperative bleeding and bile leaks. This study tested whether the use of a bioabsorble staple line reinforcement material would improve

  9. A Buffer Stock Model to Ensure Price Stabilization and Availability of Seasonal Staple Food under Free Trade Considerations

    Directory of Open Access Journals (Sweden)

    Wahyudi Sutopo

    2012-07-01

    Full Text Available The price volatility and scarcity have been became a great problem in the distribution system of seasonal staple food produced by agro industry. It has salient supply disparity during the harvest and planting season. This condition could cause disadvantages to the stakeholders such as producer, wholesaler, consumer, and government. This paper proposes a buffer stock model under free trade considerations to substitute quantitative restrictions and tariffs by indirect market intervention instrument. The instrument was developed through buffer stock scheme in accordance with warehouse receipt system (WRS and collateral management system. The public service institution for staple food buffer stock (BLUPP is proposed as wholesaler’s competitor with main responsibility to ensure price stabilization and availability of staple food. Multi criteria decision making is formulated as single objective a mixed integer non linear programming (MINLP. The result shows that the proposed model can be applied to solve the distribution problem and can give more promising outcome than its counterpart, the direct market intervention instrument.

  10. [Optimum hepatic parenchymal dissection to prevent bile leak: a comparative study using electrosurgical and stapling devices in swine].

    Science.gov (United States)

    Ikeda, Tetsuo; Akahoshi, Tomohiko; Kawanaka, Hirofumi; Uchiyama, Hideaki; Yamashita, Yo-ichi; Morita, Masaru; Oki, Eiji; Saeki, Hiroshi; Sugimachi, Keishi; Ikegami, Toru; Yoshizumi, Tomoharu; Soejima, Yuji; Shirabe, Ken; Mimori, Koshi; Watanabe, Masayuki; Hashizume, Makoto; Maehara, Yoshihiko

    2013-12-01

    Bile leakage is a serious complication of liver resection, and its treatment is very time-consuming. In open liver resection, Glisson's sheaths are usually disconnected by ligation to the extent possible during the parenchyma dissection. However, in laparoscopic surgery, the ligation, suture, and hemostasis are more difficult than in open surgery. For this reason, in laparoscopic liver resection, liver parenchyma dissection is generally accomplished using electrosurgical or stapling devices. The purpose of this study was to verify the authenticity of electrosurgical devices attached an automatic irrigation function (AI) and stapling devices for laparoscopic liver parenchymal dissection. Four devices were used for liver parenchymal dissection in laparoscopic hepatic wedge resection, in pigs: monopolar high-frequency electric cautery attached AI (MCI) (n = 6), bipolar high-frequency electric cautery attached AI (BCI) (n = 6), bipolar tissue sealing system (LigaSure) attached AI (BSI) and an endoscopic stapling device (ECHELON FLEX ENDOPATH) (ES). In each group, burst pressures were tested using an electronic manometer, paying special attention to the location (s) of the first disruption (s). The dissected tissues were examined histologically. Pressures used in electrosurgical devices attach AI were significantly higher compared to pressures used in a ES (P automatic irrigation function are useful devices to dissect the liver parenchyma.

  11. Preventing Unofficial Information Propagation

    Science.gov (United States)

    Le, Zhengyi; Ouyang, Yi; Xu, Yurong; Ford, James; Makedon, Fillia

    Digital copies are susceptible to theft and vulnerable to leakage, copying, or manipulation. When someone (or some group), who has stolen, leaked, copied, or manipulated digital documents propagates the documents over the Internet and/or distributes those through physical distribution channels many challenges arise which document holders must overcome in order to mitigate the impact to their privacy or business. This paper focuses on the propagation problem of digital credentials, which may contain sensitive information about a credential holder. Existing work such as access control policies and the Platform for Privacy Preferences (P3P) assumes that qualified or certified credential viewers are honest and reliable. The proposed approach in this paper uses short-lived credentials based on reverse forward secure signatures to remove this assumption and mitigate the damage caused by a dishonest or honest but compromised viewer.

  12. Comparison of stapled haemorrhoidopexy with traditional excisional surgery for haemorrhoidal disease (eTHoS): a pragmatic, multicentre, randomised controlled trial.

    Science.gov (United States)

    Watson, Angus J M; Hudson, Jemma; Wood, Jessica; Kilonzo, Mary; Brown, Steven R; McDonald, Alison; Norrie, John; Bruhn, Hanne; Cook, Jonathan A

    2016-11-12

    Two commonly performed surgical interventions are available for severe (grade II-IV) haemorrhoids; traditional excisional surgery and stapled haemorrhoidopexy. Uncertainty exists as to which is most effective. The eTHoS trial was designed to establish the clinical effectiveness and cost-effectiveness of stapled haemorrhoidopexy compared with traditional excisional surgery. The eTHoS trial was a large, open-label, multicentre, parallel-group, pragmatic randomised controlled trial done in adult participants (aged 18 years or older) referred to hospital for surgical treatment for grade II-IV haemorrhoids. Participants were randomly assigned (1:1) to receive either traditional excisional surgery or stapled haemorrhoidopexy. Randomisation was minimised according to baseline EuroQol 5 dimensions 3 level score (EQ-5D-3L), haemorrhoid grade, sex, and centre with an automated system to stapled haemorrhoidopexy or traditional excisional surgery. The primary outcome was area under the quality of life curve (AUC) measured with the EQ-5D-3L descriptive system over 24 months, assessed according to the randomised groups. The primary outcome measure was analysed using linear regression with adjustment for the minimisation variables. This trial is registered with the ISRCTN registry, number ISRCTN80061723. Between Jan 13, 2011, and Aug 1, 2014, 777 patients were randomised (389 to receive stapled haemorrhoidopexy and 388 to receive traditional excisional surgery). Stapled haemorrhoidopexy was less painful than traditional excisional surgery in the short term and surgical complication rates were similar between groups. The EQ-5D-3L AUC score was higher in the traditional excisional surgery group than the stapled haemorrhoidopexy group over 24 months; mean difference -0·073 (95% CI -0·140 to -0·006; p=0·0342). EQ-5D-3L was higher for stapled haemorrhoidopexy in the first 6 weeks after surgery, the traditional excisional surgery group had significantly better quality of life

  13. Transionospheric Propagation Code (TIPC)

    Science.gov (United States)

    Roussel-Dupre, Robert; Kelley, Thomas A.

    1990-10-01

    The Transionospheric Propagation Code is a computer program developed at Los Alamos National Lab to perform certain tasks related to the detection of VHF signals following propagation through the ionosphere. The code is written in FORTRAN 77, runs interactively and was designed to be as machine independent as possible. A menu format in which the user is prompted to supply appropriate parameters for a given task has been adopted for the input while the output is primarily in the form of graphics. The user has the option of selecting from five basic tasks, namely transionospheric propagation, signal filtering, signal processing, delta times of arrival (DTOA) study, and DTOA uncertainty study. For the first task a specified signal is convolved against the impulse response function of the ionosphere to obtain the transionospheric signal. The user is given a choice of four analytic forms for the input pulse or of supplying a tabular form. The option of adding Gaussian-distributed white noise of spectral noise to the input signal is also provided. The deterministic ionosphere is characterized to first order in terms of a total electron content (TEC) along the propagation path. In addition, a scattering model parameterized in terms of a frequency coherence bandwidth is also available. In the second task, detection is simulated by convolving a given filter response against the transionospheric signal. The user is given a choice of a wideband filter or a narrowband Gaussian filter. It is also possible to input a filter response. The third task provides for quadrature detection, envelope detection, and three different techniques for time-tagging the arrival of the transionospheric signal at specified receivers. The latter algorithms can be used to determine a TEC and thus take out the effects of the ionosphere to first order. Task four allows the user to construct a table of DTOAs vs TECs for a specified pair of receivers.

  14. Superluminal graviton propagation

    Science.gov (United States)

    Benakli, Karim; Chapman, Shira; Darmé, Luc; Oz, Yaron

    2016-10-01

    We use the method of characteristics to study superluminal graviton (which we call the swift graviton) propagation in theories of higher-curvature gravity of the form (Riemann)2 , (Riemann)3 , ∇2(Riemann)2 and (Riemann)4 . We consider a p p -wave background. When probed by gravitons with an appropriate polarization, several of the gravitational theories under consideration exhibit characteristic hypersurfaces outside the flat spacetime light cone.

  15. Beam Propagation Experimental Study.

    Science.gov (United States)

    1983-04-01

    Kiuttu C. A. Ekdahl N. F. Roderick F49620-81-C-0016 B. A. Sabol L. A. Wright D. J. Sullivan______________ 3 P;ERFORMING ORGANIZATION NAME AND ADDRESS...pulse * transmission through the atmosphere remain unresolved. The complexity of beam propagation physics and air chemistry makes the prediction of beam...higher front velocities than predicted by Eq. (27). Fessenden et al. 1 6 measured vf - 0.77 v in a detailed series of experiments utilizing the FX-25

  16. Efficient Rasterization for Outdoor Radio Wave Propagation.

    Science.gov (United States)

    Schmitz, A; Rick, T; Karolski, T; Kuhlen, T; Kobbelt, L

    2011-02-01

    Conventional beam tracing can be used for solving global illumination problems. It is an efficient algorithm and performs very well when implemented on the GPU. This allows us to apply the algorithm in a novel way to the problem of radio wave propagation. The simulation of radio waves is conceptually analogous to the problem of light transport. We use a custom, parallel rasterization pipeline for creation and evaluation of the beams. We implement a subset of a standard 3D rasterization pipeline entirely on the GPU, supporting 2D and 3D frame buffers for output. Our algorithm can provide a detailed description of complex radio channel characteristics like propagation losses and the spread of arriving signals over time (delay spread). Those are essential for the planning of communication systems required by mobile network operators. For validation, we compare our simulation results with measurements from a real-world network. Furthermore, we account for characteristics of different propagation environments and estimate the influence of unknown components like traffic or vegetation by adapting model parameters to measurements.

  17. Fluoride exposure and its health risk assessment in drinking water and staple food in the population of Dayyer, Iran, in 2013.

    Science.gov (United States)

    Keshavarz, Somayye; Ebrahimi, Afshin; Nikaeen, Mahnaz

    2015-01-01

    The aims of this study were to determine fluoride concentration in drinking water and staple foods consumed by residents of Dayyer port (Bushehr province, south of Iran) and to assess its health risk via human intake in 2013. Health risk assessment due to fluoride exposure via consumption of drinking water, date, vegetables and fish was conducted in spring and summer of 2013 using the US-EPA (United States-Environmental Protection Agency) method, which considers hazard quotient (HQ) as a ratio of the estimated dose of a contaminant to the reference dose. A fluoride ion-selective electrode (ISE) measured the fluoride contents of food samples. The sodium-2-(parasulfophenyl largo)-1,8-dihydroxy-3,6-naphtnalene disulfonate colorimetric method (SPADNS) was used to determine fluoride concentration in water samples. The total estimated oral intake of fluoride for children in summer and spring were 120.6 and 145.6 µg/kg/day, respectively. These values for adults were 99.2 and 112 µg/kg/day. This survey demonstrated that drinking water was the most important contributor of dietary fluoride intake in the study area. HQ values for adults and children were >1 which approves that a potential health risk of fluorosis can exist. The recommendations for the study area are supplying drinking water from alternative sources and defluoridation of drinking water by an adsorption technique and membrane filtration, respectively. Furthermore, people are suggested to have a good nutrition (especially rich of vitamin C) to reduce the risk of fluorosis.

  18. Using the Uganda National Panel Survey to analyze the effect of staple food consumption on undernourishment in Ugandan children

    Directory of Open Access Journals (Sweden)

    Michelle M. Amaral

    2017-07-01

    Full Text Available Abstract Background The United Nations’ Millennium Development Goals Report, 2015, documents that, since 1990, the number of stunted children in sub-Saharan Africa has increased by 33% even though it has fallen in all other world regions. Recognizing this, in 2011 the Government of Uganda implemented a 5-year Nutrition Action Plan. One important tenet of the Plan is to lessen malnutrition in young children by discouraging over-consumption of nutritionally deficient, but plentiful, staple foods, which it defines as a type of food insecurity. Methods We use a sample of 6101 observations on 3427 children age five or less compiled from three annual waves of the Uganda National Panel Survey to measure undernourishment. We also use the World Health Organization’s Child Growth Standards to create a binary variable indicating stunting and another indicating wasting for each child in each year. We then use random effects to estimate binary logistic regressions that show that greater staple food concentrations affect the probability of stunting and wasting. Results The estimated coefficients are used to compute adjusted odds ratios (OR that estimate the effect of greater staple food concentration on the likelihood of stunting and the likelihood of wasting. Controlling for other relevant covariates, these odds ratios show that a greater proportion of staple foods in a child’s diet increases the likelihood of stunting (OR = 1.007, p = 0.005 as well as wasting (OR = 1.011, p = 0.034. Stunting is confirmed with subsamples of males only (OR = 1.006, p = 0.05 and females only (OR = 1.008, p = 0.027, suggesting that the finding is not gender specific. Another subsample of children aged 12 months or less, most of whom do not yet consume solid food, shows no statistically significant relationship, thus supporting the validity of the other findings. Conclusion Diets containing larger proportions of staple foods are associated with greater

  19. In vitro propagation of three commercial passionfruit varieties in ...

    African Journals Online (AJOL)

    Ceci est aggravé par l'inexistence en quantité suffisante des semences de qualité. La propagation In vitro au moyen des sections nodales, est un procédé qui a connu du succès dans la production rapide des semences de bonne qualité chez les plantes à propagation vegetative. La présente étude a été réalisée afin de ...

  20. Wave propagation in elastic solids

    CERN Document Server

    Achenbach, Jan

    1984-01-01

    The propagation of mechanical disturbances in solids is of interest in many branches of the physical scienses and engineering. This book aims to present an account of the theory of wave propagation in elastic solids. The material is arranged to present an exposition of the basic concepts of mechanical wave propagation within a one-dimensional setting and a discussion of formal aspects of elastodynamic theory in three dimensions, followed by chapters expounding on typical wave propagation phenomena, such as radiation, reflection, refraction, propagation in waveguides, and diffraction. The treat

  1. Stochastic model in microwave propagation

    Energy Technology Data Exchange (ETDEWEB)

    Ranfagni, A. [“Nello Carrara” Institute of Applied Physics, CNR Florence Research Area, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy); Mugnai, D., E-mail: d.mugnai@ifac.cnr.it [“Nello Carrara” Institute of Applied Physics, CNR Florence Research Area, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy)

    2011-11-28

    Further experimental results of delay time in microwave propagation are reported in the presence of a lossy medium (wood). The measurements show that the presence of a lossy medium makes the propagation slightly superluminal. The results are interpreted on the basis of a stochastic (or path integral) model, showing how this model is able to describe each kind of physical system in which multi-path trajectories are present. -- Highlights: ► We present new experimental results on electromagnetic “anomalous” propagation. ► We apply a path integral theoretical model to wave propagation. ► Stochastic processes and multi-path trajectories in propagation are considered.

  2. Validation of the laparoscopically stapled approach as a standard technique for left lateral segment liver resection.

    Science.gov (United States)

    Wang, Xuedong; Li, Jianwei; Wang, Hongguang; Luo, Ying; Ji, Wenbin; Duan, Weidong; Zhang, Xuan; Guo, Sen; Xu, Kesen; Dong, Jiahong; Zheng, Shuguo

    2013-04-01

    Left lateral sectionectomy (LLS) is the most common type of anatomic laparoscopic liver resection performed, accounting for 20 % of all laparoscopic hepatectomies. Because there has been no standardized surgical technique for laparoscopic left lateral sectionectomy (LLLS), we offer an established operation: laparoscopically stapled left lateral sectionectomy (LSLLS). Our aim was to perform a case-controlled study of LSLLS with traditional (without vascular staplers) laparoscopic left lateral sectionectomy (TLLLS), validating the standardization and reproducibility of LSLLS. From February 2009 to December 2011, a total of 49 LSLLSs were performed. The results were compared with 33 cohort-matched TLLLSs from an earlier time period. Ordered sample cluster analysis was used to determine the learning curve of LSLLS based on the operating time and blood loss. All LSLLS were performed successfully. There were no conversions to laparotomy or hand-assisted laparoscopic resection. Two endoscopic linear staplers were used in each case. Despite a higher hospital cost ($10,892 ± $944 vs. $8,962 ± $943, p < 0.05), LSLLS compared favorably with TLLLS regarding operating time (103 ± 21 vs. 151 ± 32 min, p < 0.05) and blood loss (70.8 ± 41.6 vs. 173.3 ± 131.1 ml, p < 0.05). No specific complications related to laparoscopy were observed. Ordered sample cluster analysis demonstrated a learning curve of 18 cases for LSLLS. This study demonstrates the standardization and reproducibility of LSLLS. We therefore propose LSLLS as the standard technique for lesions located in the left lateral section of the liver.

  3. Projective analysis of staple food crop productivity in adaptation to future climate change in China

    Science.gov (United States)

    Zhang, Qing; Zhang, Wen; Li, Tingting; Sun, Wenjuan; Yu, Yongqiang; Wang, Guocheng

    2017-08-01

    Climate change continually affects our capabilities to feed the increasing population. Rising temperatures have the potential to shorten the crop growth duration and therefore reduce crop yields. In the past decades, China has successfully improved crop cultivars to stabilize, and even lengthen, the crop growth duration to make use of increasing heat resources. However, because of the complex cropping systems in the different regions of China, the possibility and the effectiveness of regulating crop growth duration to reduce the negative impacts of future climate change remain questionable. Here, we performed a projective analysis of the staple food crop productivity in double-rice, wheat-rice, wheat-maize, single-rice, and single-maize cropping systems in China using modeling approaches. The results indicated that from the present to the 2040s, the warming climate would shorten the growth duration of the current rice, wheat, and maize cultivars by 2-24, 11-13, and 9-29 days, respectively. The most significant shortening of the crop growth duration would be in Northeast China, where single-rice and single-maize cropping dominates the croplands. The shortened crop growth duration would consequently reduce crop productivity. The most significant decreases would be 27-31, 6-20, and 7-22% for the late crop in the double-rice rotation, wheat in the winter wheat-rice rotation, and single maize, respectively. However, our projection analysis also showed that the negative effects of the warming climate could be compensated for by stabilizing the growth duration of the crops via improvement in crop cultivars. In this case, the productivity of rice, wheat, and maize in the 2040s would increase by 4-16, 31-38, and 11-12%, respectively. Our modeling results implied that the possibility of securing future food production exists by adopting proper adaptation options in China.

  4. Influence of stapling the intersegmental planes on lung volume and function after segmentectomy.

    Science.gov (United States)

    Tao, Hiroyuki; Tanaka, Toshiki; Hayashi, Tatsuro; Yoshida, Kumiko; Furukawa, Masashi; Yoshiyama, Koichi; Okabe, Kazunori

    2016-10-01

    Dividing the intersegmental planes with a stapler during pulmonary segmentectomy leads to volume loss in the remnant segment. The aim of this study was to assess the influence of segment division methods on preserved lung volume and pulmonary function after segmentectomy. Using image analysis software on computed tomography (CT) images of 41 patients, the ratio of remnant segment and ipsilateral lung volume to their preoperative values (R-seg and R-ips) was calculated. The ratio of postoperative actual forced expiratory volume in 1 s (FEV1) and forced vital capacity (FVC) per those predicted values based on three-dimensional volumetry (R-FEV1 and R-FVC) was also calculated. Differences in actual/predicted ratios of lung volume and pulmonary function for each of the division methods were analysed. We also investigated the correlations of the actual/predicted ratio of remnant lung volume with that of postoperative pulmonary function. The intersegmental planes were divided by either electrocautery or with a stapler in 22 patients and with a stapler alone in 19 patients. Mean values of R-seg and R-ips were 82.7 (37.9-140.2) and 104.9 (77.5-129.2)%, respectively. The mean values of R-FEV1 and R-FVC were 103.9 (83.7-135.1) and 103.4 (82.2-125.1)%, respectively. There were no correlations between the actual/predicted ratio of remnant lung volume and pulmonary function based on the division method. Both R-FEV1 and R-FVC were correlated not with R-seg, but with R-ips. Stapling does not lead to less preserved volume or function than electrocautery in the division of the intersegmental planes. © The Author 2016. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

  5. Antiviral activity of α-helical stapled peptides designed from the HIV-1 capsid dimerization domain

    Directory of Open Access Journals (Sweden)

    Cowburn David

    2011-05-01

    Full Text Available Abstract Background The C-terminal domain (CTD of HIV-1 capsid (CA, like full-length CA, forms dimers in solution and CTD dimerization is a major driving force in Gag assembly and maturation. Mutations of the residues at the CTD dimer interface impair virus assembly and render the virus non-infectious. Therefore, the CTD represents a potential target for designing anti-HIV-1 drugs. Results Due to the pivotal role of the dimer interface, we reasoned that peptides from the α-helical region of the dimer interface might be effective as decoys to prevent CTD dimer formation. However, these small peptides do not have any structure in solution and they do not penetrate cells. Therefore, we used the hydrocarbon stapling technique to stabilize the α-helical structure and confirmed by confocal microscopy that this modification also made these peptides cell-penetrating. We also confirmed by using isothermal titration calorimetry (ITC, sedimentation equilibrium and NMR that these peptides indeed disrupt dimer formation. In in vitro assembly assays, the peptides inhibited mature-like virus particle formation and specifically inhibited HIV-1 production in cell-based assays. These peptides also showed potent antiviral activity against a large panel of laboratory-adapted and primary isolates, including viral strains resistant to inhibitors of reverse transcriptase and protease. Conclusions These preliminary data serve as the foundation for designing small, stable, α-helical peptides and small-molecule inhibitors targeted against the CTD dimer interface. The observation that relatively weak CA binders, such as NYAD-201 and NYAD-202, showed specificity and are able to disrupt the CTD dimer is encouraging for further exploration of a much broader class of antiviral compounds targeting CA. We cannot exclude the possibility that the CA-based peptides described here could elicit additional effects on virus replication not directly linked to their ability to bind

  6. Temporal scaling in information propagation.

    Science.gov (United States)

    Huang, Junming; Li, Chao; Wang, Wen-Qiang; Shen, Hua-Wei; Li, Guojie; Cheng, Xue-Qi

    2014-06-18

    For the study of information propagation, one fundamental problem is uncovering universal laws governing the dynamics of information propagation. This problem, from the microscopic perspective, is formulated as estimating the propagation probability that a piece of information propagates from one individual to another. Such a propagation probability generally depends on two major classes of factors: the intrinsic attractiveness of information and the interactions between individuals. Despite the fact that the temporal effect of attractiveness is widely studied, temporal laws underlying individual interactions remain unclear, causing inaccurate prediction of information propagation on evolving social networks. In this report, we empirically study the dynamics of information propagation, using the dataset from a population-scale social media website. We discover a temporal scaling in information propagation: the probability a message propagates between two individuals decays with the length of time latency since their latest interaction, obeying a power-law rule. Leveraging the scaling law, we further propose a temporal model to estimate future propagation probabilities between individuals, reducing the error rate of information propagation prediction from 6.7% to 2.6% and improving viral marketing with 9.7% incremental customers.

  7. Temporal scaling in information propagation

    Science.gov (United States)

    Huang, Junming; Li, Chao; Wang, Wen-Qiang; Shen, Hua-Wei; Li, Guojie; Cheng, Xue-Qi

    2014-06-01

    For the study of information propagation, one fundamental problem is uncovering universal laws governing the dynamics of information propagation. This problem, from the microscopic perspective, is formulated as estimating the propagation probability that a piece of information propagates from one individual to another. Such a propagation probability generally depends on two major classes of factors: the intrinsic attractiveness of information and the interactions between individuals. Despite the fact that the temporal effect of attractiveness is widely studied, temporal laws underlying individual interactions remain unclear, causing inaccurate prediction of information propagation on evolving social networks. In this report, we empirically study the dynamics of information propagation, using the dataset from a population-scale social media website. We discover a temporal scaling in information propagation: the probability a message propagates between two individuals decays with the length of time latency since their latest interaction, obeying a power-law rule. Leveraging the scaling law, we further propose a temporal model to estimate future propagation probabilities between individuals, reducing the error rate of information propagation prediction from 6.7% to 2.6% and improving viral marketing with 9.7% incremental customers.

  8. Wave propagation scattering theory

    CERN Document Server

    Birman, M Sh

    1993-01-01

    The papers in this collection were written primarily by members of the St. Petersburg seminar in mathematical physics. The seminar, now run by O. A. Ladyzhenskaya, was initiated in 1947 by V. I. Smirnov, to whose memory this volume is dedicated. The papers in the collection are devoted mainly to wave propagation processes, scattering theory, integrability of nonlinear equations, and related problems of spectral theory of differential and integral operators. The book is of interest to mathematicians working in mathematical physics and differential equations, as well as to physicists studying va

  9. Integrating field sampling, spatial statistics and remote sensing to map wetland vegetation in the Pantanal, Brazil

    NARCIS (Netherlands)

    Arieira, J.; Karssenberg, D.J.; Jong, S.M. de; Addink, E.A.; Couto, E.G.; Nunes Da Cunha, C.; Skøien, J.

    2011-01-01

    Development of efficient methodologies for mapping wetland vegetation is of key importance to wetland conservation. Here we propose the integration of a number of statistical techniques, in particular cluster analysis, universal kriging and error propagation modelling, to integrate

  10. Cosmic Ray Propagation Models

    Science.gov (United States)

    Moskalenko, I. V.

    2004-01-01

    Astrophysics of cosmic rays and gamma rays depends very much on the quality of the data, which become increasingly accurate each year and therefore more constraining. While direct measurements of cosmic rays are possible in only one location on the outskirts of the Milky Way, the Galactic diffuse gamma-ray emission provides insights into the spectra of cosmic rays in distant locations, therefore complementing the local cosmic-ray studies. This connection, however, requires extensive modeling and is yet to be explored in detail. The GUST mission, which is scheduled for launch in 2007 and is capable of measuring gamma-rays in the range 20 MeV - 300 GeV, will change the status quo dramatically. Galactic diffuse gamma-ray emission gathered by GUST will require adequate theoretical models. The efforts will be rewarded by the wealth of information on cosmic ray spectra and fluxes in remote locations. In its turn, a detailed cosmic ray propagation model will provide a reliable basis for other studies such as search for dark matter signals in cosmic rays and diffuse gamma rays, spectrum and origin of the extragalactic gamma-ray emission, theories of nucleosynthesis and evolution of elements etc. In this talk, I will discuss what we can learn studying the cosmic ray propagation and diffuse gamma-ray emission.

  11. Efeitos de reguladores vegetais na propagação vegetativa do porta-enxerto de videira '43-43' (Vitis vinifera x V. rotundifolia Effects of plant regulators on the vegetative propagation of vine rootstock '43-43' (Vitis vinifera x V. rotundifolia

    Directory of Open Access Journals (Sweden)

    Renato Vasconcelos Botelho

    2005-04-01

    Full Text Available Este trabalho teve como objetivo desenvolver uma metodologia para a propagação vegetativa do porta-enxerto de videira '43-43'. Estacas lenhosas retiradas em agosto, herbáceas retiradas em janeiro e semilenhosas retiradas em março foram imersas, por 10 segundos, em soluções contendo diferentes doses dos fitorreguladores paclobutrazol (0; 100 e 200 mg.L-1 e ácido indolilbutírico (0; 500 e 1.000 mg.L-1, combinados ou não, totalizando nove tratamentos para cada tipo de estaca. Após 60 dias do plantio das estacas, foram avaliadas as variáveis porcentagem de estacas enraizadas, número de raízes, massa fresca de raízes e porcentagem de estacas com brotações. Estacas lenhosas apresentaram 100% de brotação das gemas, mas não foi constatado enraizamento, independentemente da utilização de reguladores vegetais. Estacas herbáceas que não foram tratadas com reguladores vegetais apresentaram 92,0% de enraizamento e 84,0% de brotação. Para este tipo de estaca, o AIB a 1.000 mg.L-1 aumentou o número de raízes. Estacas semilenhosas apresentaram a maior porcentagem de enraizamento (23,5% quando se utilizou AIB a 1.000 mg.L-1. Este tratamento também propiciou maior massa e número de raízes; no entanto, estes valores foram inferiores àqueles verificados para estacas herbáceas.This work aimed to develop a methodology of vegetative propagation for the vine rootstock '43-43'. Hardwood cuttings collected in August, softwood cuttings collected in January and semi-hardwood cuttings collected in March were immersed in solutions, by 10 minutes, containing different doses of the plant regulators paclobutrazol (0, 100 and 200 mg.L-1 and indole butyric acid (0, 500 and 1,000 mg.L-1, combined or not, totalizing nine treatments for each kind of cutting. Sixty days after planting the cuttings, the following variables were evaluated: percentage of rooted cuttings, number of roots, fresh weight of roots and percentage of sprouted cuttings. The

  12. Robotic versus laparoscopic stapling during robotic Roux-en-Y gastric bypass surgery: a case-matched analysis of costs and clinical outcomes.

    Science.gov (United States)

    Hagen, Monika E; Jung, Minoa K; Fakhro, Jassim; Buchs, Nicolas C; Buehler, Leo; Mendoza, Jona M; Morel, Philippe

    2018-01-01

    The purpose of this analysis is to compare the robotic EndoWrist Stapling System (EWSS) 45 mm (Intuitive Surgical Inc. Sunnyvale, CA, USA) and the ECHELON FLEX™ ENDOPATH® Staplers (EFES) 60 mm (Ethicon, Cincinnati, OH, USA) for gastric pouch formation during robotic gastric bypass surgery. Patients who underwent robotic gastric bypass surgery with stapling using EWSS were matched with patients who underwent the same procedure with the EFES. Demographic, intra- and postoperative, and cost data were collected and analyzed. A total of 49 patients were identified who had undergone robotic gastric bypass surgery using EWSS. They were matched with 49 patients who underwent the equivalent procedure using EFES. With similar demographic parameters, corrected operating room time without cholecystectomy took longer for the patients that underwent surgery with EWSS (+22 min, p = 0.1042). Stapler clamping was unsuccessful in 19.0% of all recorded attempts with EWSS. Two intra-operative complications unrelated to stapling and one complication due to stapling were observed in the EWSS cohort, while none was observed for the EFES group. Significantly, more recharges were needed with EWSS to complete the gastric pouch (4.9 vs. 4.1, p = 0.0048) and overall stapling costs for the procedure were significantly higher (2212.2 vs. 1787.4 USD, p = 0.0001). Gastric pouch formation using EWSS during robotic gastric bypass surgery is feasible. Due to the shorter length of EWSS compared to EFES, more stapling recharges are required to complete gastric pouch formation and the stapling costs for gastric bypass surgery are higher. Further systematic research should be conducted to precisely determine the value of the robotic EWSS for gastric bypass surgery.

  13. Laparoscopic Sleeve Gastrectomy With or Without Staple Line Inversion and Distal Fixation to the Transverse Mesocolon: Impact on Early Postoperative Outcomes.

    Science.gov (United States)

    Abdallah, Emad; Emile, Sameh Hany; Elfeki, Hossam

    2017-02-01

    Staple line complications and axial rotation of the gastric tube after sleeve gastrectomy are well-recognized complications of the procedure. The present study aims to investigate the role of staple line inversion and distal fixation to the transverse mesocolon in reducing these complications. This is a retrospective analysis of prospectively collected data of 252 patients with morbid obesity who underwent laparoscopic sleeve gastrectomy (LSG). Patients were subdivided into two groups: group I comprising 124 patients did not have distal sleeve fixation and group II comprising 128 patients underwent staple line inversion and distal fixation. Patients were 171 females and 81 males with a mean age of 33.2 ± 8.7 years and a mean preoperative body mass index (BMI) of 50.9 ± 8.6 Kg/m2. The mean operating time was 103.9 ± 26.9 min and the median hospital stay was 1 day. Major complications were detected in 15 (5.9 %) patients, who were all in group I. Group I had significantly shorter operative time and significantly higher rates of staple line bleeding (4 % in group I versus 0 in group II) and gastric axial rotation (5.6 % in group I versus 0 in group II). There were no significant differences between the two groups regarding early postoperative vomiting (21.7 % versus 26.5 %) and staple line leak (2.4 % versus 0). Staple line inversion and distal fixation to the transverse mesocolon can be a simple, effective strategy to prevent staple line bleeding, and gastric axial rotation, though it prolonged the operative time of LSG.

  14. Maternal consumption of non-staple food in the first trimester and risk of neural tube defects in offspring.

    Science.gov (United States)

    Wang, Meng; Wang, Zhi-Ping; Gao, Li-Jie; Yang, Hui; Zhao, Zhong-Tang

    2015-04-24

    To study the associations between maternal consumption of non-staple food in the first trimester and risk of neural tube defects (NTDs) in offspring. Data collected from a hospital-based case-control study conducted between 2006 and 2008 in Shandong/Shanxi provinces including 459 mothers with NTDs-affected births and 459 mothers without NTDs-affected births. Logistic regression models were used to examine the associations between maternal consumption of non-staple food in the first trimester and risk of NTDs in offspring. The effects were evaluated by odds ratio (OR) and 95% confidence intervals (95% CIs) with SAS9.1.3.software. Maternal consumption of milk, fresh fruits and nuts in the first trimester were protective factors for total NTDs. Compared with consumption frequency of ˂1 meal/week, the ORs for milk consumption frequency of 1-2, 3-6, ≥7 meals/week were 0.50 (95% CI: 0.28-0.88), 0.56 (0.32-0.99), and 0.59 (0.38-0.90), respectively; the ORs for fresh fruits consumption frequency of 1-2, 3-6, ≥7 meals/week were 0.29 (95% CI: 0.12-0.72), 0.22 (0.09-0.53), and 0.32 (0.14-0.71), respectively; the ORs for nuts consumption frequency of 1-2, 3-6, ≥7 meals/week were 0.60 (95% CI: 0.38-0.94), 0.49 (0.31-0.79), and 0.63 (0.36-1.08), respectively. Different effects of above factors on NTDs were found for subtypes of anencephaly and spina bifida. Maternal non-staple food consumption of milk, fresh fruits and nuts in the first trimester was associated with reducing NTDs risk in offspring.

  15. Miniplatten versus Staples - biomechanische Untersuchung zur Stabilität von Frakturversorgungen im Angulus- und Korpusbereich der Mandibula

    OpenAIRE

    Wetzel, Thomas

    2007-01-01

    Ziel der Arbeit ist ein Vergleich der biomechanischen Stabilität von Frakturversorgungen mit Staples(ST) aus einem Shape-Memory-Alloy und herkömmlichen Miniplatten(MP) in 2 typischen Frakturlokalisationen am Unterkiefer(UK). Hierzu wurden 36 UK-Modelle aus Polyurethan-Schaum am Korpus,regio molares 6-7, und im Bereich des Kieferwinkels frakturiert. Die biomechanische Untersuchung erfolgte in vitro an einem spez. Prüfstand. Es konnte nachgewiesen werden, dass bei der Frakturversorgung im Korpu...

  16. Minimally invasive atrial fibrillation ablation combined with a new technique for thoracoscopic stapling of the left atrial appendage: case report.

    Science.gov (United States)

    Balkhy, Husam H; Chapman, Peter D; Arnsdorf, Susan E

    2004-01-01

    Surgical therapy for atrial fibrillation (AF) is becoming increasingly popular in the concomitant setting. Minimally invasive techniques are being developed for management of the patient with stand-alone AF. We report on our first case of a patient undergoing thoracoscopic microwave epicardial AF ablation combined with the incorporation of a new device for left atrial appendage (LAA) exclusion. The patient is a 62-year-old man with a 10-year history of drug-resistant paroxysmal AF. He had failed multiple electrical cardioversions, as well as a percutaneous attempt at left and right superior pulmonary vein (PV) isolation. On October 8, 2003, he was admitted to undergo an off-pump thoracoscopic epicardial microwave ablation. While the patient was under general anesthesia, 3 thoracoscopic access ports were created in the right chest. The pericardium was widely opened. Red rubber catheters were positioned in the transverse and oblique sinuses. The 2 catheters were retrieved on the left side and tied together, forming a guide to the Flex 10 microwave ablation probe (Guidant Corporation, Fremont, CA, USA). The Flex 10 sheath was positioned to encircle all 4 pulmonary veins. The position of the ablation catheter was confirmed visually to be behind the LAA. Sequential ablation was then performed in the segments of the Flex 10 to create a continuous ablation line around the PVs. A connecting lesion to the base of the LAA was then performed. The LAA was then stapled using the SurgASSIST computer-mediated thoracoscopic stapling system (Power Medical Intervention, New Hope, PA, USA). The procedure was uneventful and lasted for a total of 2.5 hours. The patient was discharged home on postoperative day 2 in rate-controlled AF. He was successfully electrically cardioverted to normal sinus rhythm (NSR). At latest follow-up he remained in NSR and continued to take dofetilide (Tikosyn). Thoracoscopic epicardial microwave ablation of AF is a technically feasible procedure with

  17. Broadband unidirectional ultrasound propagation

    Energy Technology Data Exchange (ETDEWEB)

    Sinha, Dipen N.; Pantea, Cristian

    2017-12-12

    A passive, linear arrangement of a sonic crystal-based apparatus and method including a 1D sonic crystal, a nonlinear medium, and an acoustic low-pass filter, for permitting unidirectional broadband ultrasound propagation as a collimated beam for underwater, air or other fluid communication, are described. The signal to be transmitted is first used to modulate a high-frequency ultrasonic carrier wave which is directed into the sonic crystal side of the apparatus. The apparatus processes the modulated signal, whereby the original low-frequency signal exits the apparatus as a collimated beam on the side of the apparatus opposite the sonic crystal. The sonic crystal provides a bandpass acoustic filter through which the modulated high-frequency ultrasonic signal passes, and the nonlinear medium demodulates the modulated signal and recovers the low-frequency sound beam. The low-pass filter removes remaining high-frequency components, and contributes to the unidirectional property of the apparatus.

  18. Neutrino Propagation in Matter

    Directory of Open Access Journals (Sweden)

    Mattias Blennow

    2013-01-01

    Full Text Available We describe the effects of neutrino propagation in the matter of the Earth relevant to experiments with atmospheric and accelerator neutrinos and aimed at the determination of the neutrino mass hierarchy and CP violation. These include (i the resonance enhancement of neutrino oscillations in matter with constant or nearly constant density, (ii adiabatic conversion in matter with slowly changing density, (iii parametric enhancement of oscillations in a multilayer medium, and (iv oscillations in thin layers of matter. We present the results of semianalytic descriptions of flavor transitions for the cases of small density perturbations, in the limit of large densities and for small density widths. Neutrino oscillograms of the Earth and their structure after determination of the 1–3 mixing are described. A possibility to identify the neutrino mass hierarchy with the atmospheric neutrinos and multimegaton scale detectors having low energy thresholds is explored. The potential of future accelerator experiments to establish the hierarchy is outlined.

  19. Fruits and vegetables (image)

    Science.gov (United States)

    A healthy diet includes adding vegetables and fruit every day. Vegetables like broccoli, green beans, leafy greens, zucchini, cauliflower, cabbage, carrots, and tomatoes are low in calories and high in fiber, vitamins, and minerals. ...

  20. Total Vegetation 2002

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — These are polygons that contain vegetated pixels in the May, 2002 imagery from aerial overflight of the Grand Canyon. Vegetation was mapped between stage elevations...

  1. One stage functional end-to-end stapled intestinal anastomosis and resection performed by nonexpert surgeons for the treatment of small intestinal obstruction in 30 dogs.

    Science.gov (United States)

    Jardel, Nicolas; Hidalgo, Antoine; Leperlier, Dimitri; Manassero, Mathieu; Gomes, Aymeric; Bedu, Anne Sophie; Moissonnier, Pierre; Fayolle, Pascal; Begon, Dominique; Riquois, Elisabeth; Viateau, Véronique

    2011-02-01

    To describe stapled 1-stage functional end-to-end intestinal anastomosis for treatment of small intestinal obstruction in dogs and evaluate outcome when the technique is performed by nonexpert surgeons after limited training in the technique. Case series. Dogs (n=30) with intestinal lesions requiring an enterectomy. Stapled 1-stage functional end-to-end anastomosis and resection using a GIA-60 and a TA-55 stapling devices were performed under supervision of senior residents and faculty surgeons by junior surgeons previously trained in the technique on pigs. Procedure duration and technical problems were recorded. Short-term results were collected during hospitalization and at suture removal. Long-term outcome was established by clinical and ultrasonographic examinations at least 2 months after surgery and from written questionnaires, completed by owners. Mean±SD procedure duration was 15±12 minutes. Postoperative recovery was uneventful in 25 dogs. One dog had anastomotic leakage, 1 had a localized abscess at the transverse staple line, and 3 dogs developed an incisional abdominal wall abscess. No long-term complications occurred (follow-up, 2-32 months). Stapled 1-stage functional end-to-end anastomosis and resection is a fast and safe procedure in the hand of nonexpert but trained surgeons. © Copyright 2011 by The American College of Veterinary Surgeons.

  2. Evaluation of a transection method for distal pancreatectomy: A comparative study on the use of electrosurgical and stapling devices in swine.

    Science.gov (United States)

    Ikeda, Tetsuo; Akahoshi, Tomohiko; Kawanaka, Hirofumi; Uchiyama, Hideaki; Yamashita, Yo-ichi; Morita, Masaru; Oki, Eiji; Saeki, Hiroshi; Sugimachi, Keishi; Ikegami, Toru; Yoshizumi, Tomoharu; Soejima, Yuji; Shirabe, Ken; Mimori, Koshi; Watanabe, Masayuki; Hashizume, Makoto; Maehara, Yoshihiko

    2013-12-01

    Despite marked improvements in pancreatic surgery, the high incidence of pancreatic fistula and high morbidity after resection persists. The objective of this study was to evaluate the role of electrosurgical and stapling devices as an alternative to traditional methods of stump closure in an animal model of distal pancreatectomy. Four devices were used for transection of the pancreatic body : a bi-polar thermofusion system attached to an automatic irrigation function (BI, n = 3), a bi-polar tissue sealer (BS, n = 3), an ultrasonic scissor (US, n = 3), and an endoscopic stapling device (ES, n = 3). For each group, burst pressure was tested using an electronic manometer, with a focus on the location (s) of the first disruption (s). Histological examination was performed for the dissected surfaces. The transection line, including staples, was embedded in a polyester resin, and histological examination was performed for these polished sections of the resin. Pressure was significantly higher for BI (P < 0.01) than that for the other devices. In contrast, thermal denaturation of the pancreas parenchyma was observed at a depth of approximately 1 mm from the dissected portion for BS, while it extended beyond 15 mm for BI. The staple line was the first disruption point for all of ES cases. The pellicle of the pancreas is likely to be deficient after a surgical operation. If the pellicle is preserved, the strength of the pellicle may be insufficient for complete closure with high stapling mechanical pressure or the protein coagulation of usually used electrosurgical devices.

  3. Influence of vegetation on SMOS mission retrievals

    Directory of Open Access Journals (Sweden)

    K. Lee

    2002-01-01

    Full Text Available Using the proposed Soil Moisture and Ocean Salinity (SMOS mission as a case study, this paper investigates how the presence and nature of vegetation influence the values of geophysical variables retrieved from multi-angle microwave radiometer observations. Synthetic microwave brightness temperatures were generated using a model for the coherent propagation of electromagnetic radiation through a stratified medium applied to account simultaneously for the emission from both the soil and any vegetation canopy present. The synthetic data were calculated at the look-angles proposed for the SMOS mission for three different soil-moisture states (wet, medium wet and dry and four different vegetation covers (nominally grass, crop, shrub and forest. A retrieval mimicking that proposed for SMOS was then used to retrieve soil moisture, vegetation water content and effective temperature for each set of synthetic observations. For the case of a bare soil with a uniform profile, the simpler Fresnel model proposed for use with SMOS gave identical estimates of brightness temperatures to the coherent model. However, to retrieve accurate geophysical parameters in the presence of vegetation, the opacity coefficient (one of two parameters used to describe the effect of vegetation on emission from the soil surface used within the SMOS retrieval algorithm needed to be a function of look-angle, soil-moisture status, and vegetation cover. The effect of errors in the initial specification of the vegetation parameters within the coherent model was explored by imposing random errors in the values of these parameters before generating synthetic data and evaluating the errors in the geophysical parameters retrieved. Random errors of 10% result in systematic errors (up to 0.5°K, 3%, and ~0.2 kg m-2 for temperature, soil moisture, and vegetation content, respectively and random errors (up to ~2°K, ~8%, and ~2 kg m-2 for temperature, soil moisture and vegetation content

  4. Propagation of Ion Acoustic Perturbations

    DEFF Research Database (Denmark)

    Pécseli, Hans

    1975-01-01

    Equations describing the propagation of ion acoustic perturbations are considered, using the assumption that the electrons are Boltzman distributed and isothermal at all times. Quasi-neutrality is also considered.......Equations describing the propagation of ion acoustic perturbations are considered, using the assumption that the electrons are Boltzman distributed and isothermal at all times. Quasi-neutrality is also considered....

  5. Flowering does not decrease vegetative competitiveness of Lolium perenne

    DEFF Research Database (Denmark)

    Thiele, Jan; Bagger Jørgensen, Rikke; Hauser, Thure Pavlo

    2009-01-01

    as reduced flowering could free resources and increase productivity. But if so, less-flowering cultivars might be more competitive and invade natural swards. We tested for costs of sexual reproduction on vegetative propagation and competitiveness of the perennial grass Lolium perenne, one of the most...

  6. Risk Factors for Dehiscence of Stapled Functional End-to-End Intestinal Anastomoses in Dogs: 53 Cases (2001-2012).

    Science.gov (United States)

    Snowdon, Kyle A; Smeak, Daniel D; Chiang, Sharon

    2016-01-01

    To identify risk factors for dehiscence in stapled functional end-to-end anastomoses (SFEEA) in dogs. Retrospective case series. Dogs (n = 53) requiring an enterectomy. Medical records from a single institution for all dogs undergoing an enterectomy (2001-2012) were reviewed. Surgeries were included when gastrointestinal (GIA) and thoracoabdominal (TA) stapling equipment was used to create a functional end-to-end anastomosis between segments of small intestine or small and large intestine in dogs. Information regarding preoperative, surgical, and postoperative factors was recorded. Anastomotic dehiscence was noted in 6 of 53 cases (11%), with a mortality rate of 83%. The only preoperative factor significantly associated with dehiscence was the presence of inflammatory bowel disease (IBD). Surgical factors significantly associated with dehiscence included the presence, duration, and number of intraoperative hypotensive periods, and location of anastomosis, with greater odds of dehiscence in anastomoses involving the large intestine. IBD, location of anastomosis, and intraoperative hypotension are risk factors for intestinal anastomotic dehiscence after SFEEA in dogs. Previously suggested risk factors (low serum albumin concentration, preoperative septic peritonitis, and intestinal foreign body) were not confirmed in this study. © Copyright 2015 by The American College of Veterinary Surgeons.

  7. Relationship between postoperative bulla neogenesis at the staple line and the resected lung volume in primary spontaneous pneumothorax.

    Science.gov (United States)

    Tsuboshima, Kenji; Nagata, Machiko; Wakahara, Teppei; Matoba, Yasumi; Matsumoto, Shoichi; Maniwa, Yoshimasa

    2015-10-01

    In patients with primary spontaneous pneumothorax (PSP), bullae are generally resected using autosutures under video-assisted thoracoscopic surgery (VATS). However, postoperative bulla neogenesis (POBN) along the staple line is not rare and is a factor promoting PSP recurrence. POBN is attributed to tension along the staple line, and we surmise that the resected lung volume affects this tension. Therefore, in this study, we retrospectively examined the relationship between POBN and the resected lung volume in patients who underwent surgical treatment of PSP. Between February 2011 and May 2015, 70 lung resection sites in 56 PSP patients who underwent primary VATS at our hospital were evaluated. POBN was diagnosed on high-resolution computed tomography 1 year postoperatively in principle. POBN was detected at 26 of 70 (37.1 %) sites. On univariate analysis, lung weight ≥1.5 g, lung length ≥4.0 cm, resected site: apical, age lung weight ≥1.5 g or lung length ≥4.0 cm were 47.9 % (P = 0.004) and 44.1 % (P lung weight ≥1.5 g was only significant factor for POBN (P = 0.043). A resected lung weight ≥1.5 g was only significant risk factor of POBN in patients with PSP.

  8. Laparoscopic Linear Stapled Running Enterotomy Closure in Roux-en-Y Gastric Bypass Using Absorbable Unidirectional Barbed Suture (Stratafix® 2/0).

    Science.gov (United States)

    Gys, Ben; Gys, Tobie; Ruyssers, Michael; Lafullarde, Thierry

    2017-10-01

    Laparoscopic running enterotomy closure for linear stapled Roux-en-Y gastric bypass (RYGB) may be enhanced by using unidirectional barbed sutures (Stratafix™ 2/0, Ethicon) as it eliminates the need for knot tying and assistance from a third hand. The objective of this paper is to present our technique using unidirectional barbed sutures (Stratafix™ 2/0, Ethicon). After stapling the gastrojejunostomy, we start the closure of the residual enterotomy unidirectional from left to right (single, full-thickness layer) which is cut without a knot. For the jejunojejunostomy, the residual enterotomy is closed perpendicular from top to bottom in order to avoid iatrogenic stricture formation (single, full-thickness layer). No backstitches are performed. We feel strongly that this technique might enhance running enterotomy closure for linear stapled RYGB.

  9. Propagation Engineering in Wireless Communications

    CERN Document Server

    Ghasemi, Abdollah; Ghasemi, Farshid

    2012-01-01

    Wireless communications has seen explosive growth in recent decades, in a realm that is both broad and rapidly expanding to include satellite services, navigational aids, remote sensing, telemetering, audio and video broadcasting, high-speed data communications, mobile radio systems and much more. Propagation Engineering in Wireless Communications deals with the basic principles of radiowaves propagation for frequency bands used in radio-communications, offering descriptions of new achievements and newly developed propagation models. The book bridges the gap between theoretical calculations and approaches, and applied procedures needed for advanced radio links design. The primary objective of this two-volume set is to demonstrate the fundamentals, and to introduce propagation phenomena and mechanisms that engineers are likely to encounter in the design and evaluation of radio links of a given type and operating frequency. Volume one covers basic principles, along with tropospheric and ionospheric propagation,...

  10. A database for propagation models

    Science.gov (United States)

    Kantak, Anil V.; Suwitra, Krisjani; Le, Choung

    1993-01-01

    The NASA Propagation Program supports academic research that models various propagation phenomena in the space research frequency bands. NASA supports such research via school and institutions prominent in the field. The products of such efforts are particularly useful for researchers in the field of propagation phenomena and telecommunications systems engineers. The systems engineer usually needs a few propagation parameter values for a system design. Published literature on the subject, such as the Cunsultative Committee for International Radio (CCIR) publications, may help somewhat, but often times, the parameter values given in such publications use a particular set of conditions which may not quite include the requirements of the system design. The systems engineer must resort to programming the propagation phenomena model of interest and to obtain the parameter values to be used in the project. Furthermore, the researcher in the propagation field must then program the propagation models either to substantiate the model or to generate a new model. The researcher or the systems engineer must either be a skillful computer programmer or hire a programmer, which of course increases the cost of the effort. An increase in cost due to the inevitable programming effort may seem particularly inappropriate if the data generated by the experiment is to be used to substantiate the already well-established models, or a slight variation thereof. To help researchers and the systems engineers, it was recommended by the participants of NASA Propagation Experimenters (NAPEX) 15 held in London, Ontario, Canada on 28-29 June 1991, that propagation software should be constructed which will contain models and prediction methods of most propagation phenomenon. Moreover, the software should be flexible enough for the user to make slight changes to the models without expending a substantial effort in programming.

  11. Clinical report on a computer-controlled hand-actuated stapling system for general lung surgery: the first application in Japan.

    Science.gov (United States)

    Satoh, Yukitoshi; Matsui, Yoshio; Ogawa, Fumihiro; Amano, Hideki; Hara, Hidenori; Nezu, Kenji; Iyoda, Akira

    2009-08-01

    Computer-controlled stapling systems can improve lung tissue approximation during thoracic surgery. We report our experience with a handy system with computer-controlled placement of staples for lung resection in Japan. The iDrive system is the improved second version of the SurgAssist stapling system. It comprises a self-contained computer microprocessor and hand-held control unit combined with a digital loading unit (a power linear cutter with a blue or green cartridge) for use in open and minimally invasive thoracic surgery. The mounted control unit has two uses: (1) controlling accurate placement of the cartridge by orientating the tip of the rigid and curved shaft and (2) controlling the closure of the stapler and the firing. Each cartridge contains a programmed electronic device that triggers activation of the appropriate program in the self-contained microprocessor. The compression level on lung tissue is determined by the computer. From March to October 2008, the iDrive system was used 53 times in a consecutive series of 39 patients during open thoracic lung surgery. There were 12 women and 27 men. The following procedures were performed: lobectomy, segmentectomy, and wedge resection. The power linear cutters were used for stapling lung parenchyma for wedge resection in 6 patients, bullectomy in 1, segmentectomy in 2, and fissure division in 33. There were no stapling failures and no complications related to the staplers. The new computer-controlled stapling system may be safe and efficient for lung parenchymal tissue resection during open thoracic surgery.

  12. Simulations of moving effect of coastal vegetation on tsunami damping

    Science.gov (United States)

    Tsai, Ching-Piao; Chen, Ying-Chi; Octaviani Sihombing, Tri; Lin, Chang

    2017-05-01

    A coupled wave-vegetation simulation is presented for the moving effect of the coastal vegetation on tsunami wave height damping. The problem is idealized by solitary wave propagation on a group of emergent cylinders. The numerical model is based on general Reynolds-averaged Navier-Stokes equations with renormalization group turbulent closure model by using volume of fluid technique. The general moving object (GMO) model developed in computational fluid dynamics (CFD) code Flow-3D is applied to simulate the coupled motion of vegetation with wave dynamically. The damping of wave height and the turbulent kinetic energy along moving and stationary cylinders are discussed. The simulated results show that the damping of wave height and the turbulent kinetic energy by the moving cylinders are clearly less than by the stationary cylinders. The result implies that the wave decay by the coastal vegetation may be overestimated if the vegetation was represented as stationary state.

  13. Clonal propagation of Cyclamen persicum via somatic embryogenesis.

    Science.gov (United States)

    Winkelmann, Traud

    2010-01-01

    Cyclamen (Cyclamen persicum) is an economically important ornamental pot plant with local use as cut flower as well. Traditionally, it is propagated via seeds, but interest is given in vegetative propagation of parental lines as well as superior single plants. Somatic embryogenesis is an efficient in vitro propagation method for many cyclamen cultivars. Starting from ovules of unpollinated flowers, callus is induced and propagated in a medium containing 2,4-dichlorophenoxyacetic acid (2,4-D) and 6-(gamma,gamma-dimethylallylamino)purine (2iP). Transfer to hormone-free medium results in the differentiation of somatic embryos, which afterwards germinate on the same medium. These first culture stages take about 6-7 months and are carried out in complete darkness. Two to four months after the transfer to light, plantlets develop which can be acclimatized in the greenhouse. The regenerated plants are characterized by low percentages of somaclonal variation. This protocol has proven useful not only for clonal propagation, but also for artificial seed preparation, cryopreservation, genetic transformation and protoplast regeneration.

  14. The elemental analysis of staple foods for children in Tanzania as a step to the improvement of their nutrition and health

    Energy Technology Data Exchange (ETDEWEB)

    Mohammed, Najat K. [Department of Physics, School of Electronics and Physical Sciences, University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom)], E-mail: njkassim@yahoo.com; Spyrou, Nicholas M. [Department of Physics, School of Electronics and Physical Sciences, University of Surrey, Guildford, Surrey GU2 7XH (United Kingdom)

    2009-03-15

    The objective of this study was to evaluate the contents of essential elements in the two staple foods (rice and maize flour) consumed by children in Tanzania as a possible selection measure for high nutrient foods in order to combat malnutrition. Samples were analysed using proton-induced X-ray emission (PIXE) at the University of Surrey Ion Beam Centre. The mean concentrations of elements determined in the two staple foods are presented and compared with the mean concentrations published in the literature.

  15. Assessment of Human Organism's Intake of Trace Elements from Staple Foodstuffs in Central Region of Russia

    CERN Document Server

    Gorbunov, A V; Okina, O I; Frontasyeva, M A; Gundorina, S F

    2004-01-01

    The trace element content of raw materials and foodstuffs produced from them, typical for basket of goods of residents of Central Russia, was examined. An excess of permissible levels of some trace elements was observed. This phenomenon is explained in terms of different factors such as pollution of the environment, industrial technologies, biological peculiarities of raw materials of animal and vegetable origin. An assessment of human organism's trace element intake of different food allowances is given. This study was undertaken in the framework of IAEA CRP (Contract No. 11927/R2).

  16. Dike Propagation Near Drifts

    Energy Technology Data Exchange (ETDEWEB)

    NA

    2002-03-04

    The purpose of this Analysis and Model Report (AMR) supporting the Site Recommendation/License Application (SR/LA) for the Yucca Mountain Project is the development of elementary analyses of the interactions of a hypothetical dike with a repository drift (i.e., tunnel) and with the drift contents at the potential Yucca Mountain repository. This effort is intended to support the analysis of disruptive events for Total System Performance Assessment (TSPA). This AMR supports the Process Model Report (PMR) on disruptive events (CRWMS M&O 2000a). This purpose is documented in the development plan (DP) ''Coordinate Modeling of Dike Propagation Near Drifts Consequences for TSPA-SR/LA'' (CRWMS M&O 2000b). Evaluation of that Development Plan and the work to be conducted to prepare Interim Change Notice (ICN) 1 of this report, which now includes the design option of ''Open'' drifts, indicated that no revision to that DP was needed. These analyses are intended to provide reasonable bounds for a number of expected effects: (1) Temperature changes to the waste package from exposure to magma; (2) The gas flow available to degrade waste containers during the intrusion; (3) Movement of the waste package as it is displaced by the gas, pyroclasts and magma from the intruding dike (the number of packages damaged); (4) Movement of the backfill (Backfill is treated here as a design option); (5) The nature of the mechanics of the dike/drift interaction. These analyses serve two objectives: to provide preliminary analyses needed to support evaluation of the consequences of an intrusive event and to provide a basis for addressing some of the concerns of the Nuclear Regulatory Commission (NRC) expressed in the Igneous Activity Issue Resolution Status Report.

  17. Laser beam propagation generation and propagation of customized light

    CERN Document Server

    Forbes, Andrew

    2014-01-01

    ""The text is easy to read and is accompanied by beautiful illustrations. It is an excellent book for anyone working in laser beam propagation and an asset for any library.""-Optics & Photonics News, July 2014

  18. Particle propagation in cosmological backgrounds

    CERN Document Server

    Arteaga, Daniel

    2007-01-01

    We study the quantum propagation of particles in cosmological backgrounds, by considering a doublet of massive scalar fields propagating in an expanding universe, possibly filled with radiation. We focus on the dissipative effects related to the expansion rate. At first order, we recover the expected result that the decay rate is determined by the local temperature. Beyond linear order, the decay rate has an additional contribution governed by the expansion parameter. This latter contribution is present even for stable particles in the vacuum. Finally, we analyze the long time behaviour of the propagator and briefly discuss applications to the trans-Planckian question.

  19. Maternal Consumption of Non-Staple Food in the First Trimester and Risk of Neural Tube Defects in Offspring

    Directory of Open Access Journals (Sweden)

    Meng Wang

    2015-04-01

    Full Text Available To study the associations between maternal consumption of non-staple food in the first trimester and risk of neural tube defects (NTDs in offspring. Data collected from a hospital-based case-control study conducted between 2006 and 2008 in Shandong/Shanxi provinces including 459 mothers with NTDs-affected births and 459 mothers without NTDs-affected births. Logistic regression models were used to examine the associations between maternal consumption of non-staple food in the first trimester and risk of NTDs in offspring. The effects were evaluated by odds ratio (OR and 95% confidence intervals (95% CIs with SAS9.1.3.software. Maternal consumption of milk, fresh fruits and nuts in the first trimester were protective factors for total NTDs. Compared with consumption frequency of ˂1 meal/week, the ORs for milk consumption frequency of 1–2, 3–6, ≥7 meals/week were 0.50 (95% CI: 0.28–0.88, 0.56 (0.32–0.99, and 0.59 (0.38–0.90, respectively; the ORs for fresh fruits consumption frequency of 1–2, 3–6, ≥7 meals/week were 0.29 (95% CI: 0.12–0.72, 0.22 (0.09–0.53, and 0.32 (0.14–0.71, respectively; the ORs for nuts consumption frequency of 1–2, 3–6, ≥7 meals/week were 0.60 (95% CI: 0.38–0.94, 0.49 (0.31–0.79, and 0.63 (0.36–1.08, respectively. Different effects of above factors on NTDs were found for subtypes of anencephaly and spina bifida. Maternal non-staple food consumption of milk, fresh fruits and nuts in the first trimester was associated with reducing NTDs risk in offspring.

  20. The NASA radiowave propagation program

    Science.gov (United States)

    Davarian, Faramaz

    The objectives of the NASA radiowave Propagation Program are to enable new satellite communication applications and to enhance existing satellite communication networks. These objectives are achieved by supporting radio wave propagation studies and disseminating the study results in a timely fashion. Studies initiated by this program in the 1980s enabled the infant concept of conducting mobile communications via satellite to reach a state of relative maturity in 1990. The program also supported the satellite communications community by publishing and revising two handbooks dealing with radio wave propagation effects for frequencies below and above 10 GHz, respectively. The program has served the international community through its support of the International Telecommunications Union. It supports state of the art work at universities. Currently, the program is focusing on the Advanced Communications Technology Satellite (ACTS) and its propagation needs. An overview of the program's involvement in the ACTS project is given.

  1. Radio Wave Propagation in Tunnels

    National Research Council Canada - National Science Library

    Lee, Jeho

    2000-01-01

    This report examines the radio propagation model for narrow and long tunnels. Modal analysis is used to model the path gain in 2-D and 3-D rectangular tunnels and the coupling loss of L, T and cross tunnels...

  2. Propagation engineering in wireless communications

    CERN Document Server

    Ghasemi, Abdollah; Ghasemi, Farshid

    2016-01-01

    This book covers the basic principles for understanding radio wave propagation for common frequency bands used in radio-communications. This includes achievements and developments in propagation models for wireless communication. This book is intended to bridge the gap between the theoretical calculations and approaches to the applied procedures needed for radio links design in a proper manner. The authors emphasize propagation engineering by giving fundamental information and explain the use of basic principles together with technical achievements. This new edition includes additional information on radio wave propagation in guided media and technical issues for fiber optics cable networks with several examples and problems. This book also includes a solution manual - with 90 solved examples distributed throughout the chapters - and 158 problems including practical values and assumptions.

  3. Wave propagation in electromagnetic media

    CERN Document Server

    Davis, Julian L

    1990-01-01

    This is the second work of a set of two volumes on the phenomena of wave propagation in nonreacting and reacting media. The first, entitled Wave Propagation in Solids and Fluids (published by Springer-Verlag in 1988), deals with wave phenomena in nonreacting media (solids and fluids). This book is concerned with wave propagation in reacting media-specifically, in electro­ magnetic materials. Since these volumes were designed to be relatively self­ contained, we have taken the liberty of adapting some of the pertinent material, especially in the theory of hyperbolic partial differential equations (concerned with electromagnetic wave propagation), variational methods, and Hamilton-Jacobi theory, to the phenomena of electromagnetic waves. The purpose of this volume is similar to that of the first, except that here we are dealing with electromagnetic waves. We attempt to present a clear and systematic account of the mathematical methods of wave phenomena in electromagnetic materials that will be readily accessi...

  4. Propagation in Diagonal Anisotropic Chirowaveguides

    Directory of Open Access Journals (Sweden)

    S. Aib

    2017-01-01

    Full Text Available A theoretical study of electromagnetic wave propagation in parallel plate chirowaveguide is presented. The waveguide is filled with a chiral material having diagonal anisotropic constitutive parameters. The propagation characterization in this medium is based on algebraic formulation of Maxwell’s equations combined with the constitutive relations. Three propagation regions are identified: the fast-fast-wave region, the fast-slow-wave region, and the slow-slow-wave region. This paper focuses completely on the propagation in the first region, where the dispersion modal equations are obtained and solved. The cut-off frequencies calculation leads to three cases of the plane wave propagation in anisotropic chiral medium. The particularity of these results is the possibility of controlling the appropriate cut-off frequencies by choosing the adequate physical parameters values. The specificity of this study lies in the bifurcation modes confirmation and the possible contribution to the design of optical devices such as high-pass filters, as well as positive and negative propagation constants. This negative constant is an important feature of metamaterials which shows the phenomena of backward waves. Original results of the biaxial anisotropic chiral metamaterial are obtained and discussed.

  5. Adenocarcinoma in the anal canal after ileal pouch-anal anastomosis for familial adenomatous polyposis using a double-stapled technique: report of two cases

    NARCIS (Netherlands)

    Vrouenraets, Bart C.; van Duijvendijk, Peter; Bemelman, Willem A.; Offerhaus, G. Johan A.; Slors, J. Frederik M.

    2004-01-01

    Restorative proctocolectomy with an ileal pouch-anal anastomosis is thought to abolish the risk of colorectal adenoma development in patients suffering from familial adenomatous polyposis. Both after mucosectomy with a handsewn anastomosis and after a double-stapled anastomosis, rectal mucosa is

  6. Laparoscopic sleeve gastrectomy without over-sewing the staple line: A case series demonstrating efficacy and minimization of both intra- and post-operative complications

    Directory of Open Access Journals (Sweden)

    Dr. S. Moradian, DO

    2017-01-01

    Conclusion: Our technique, to our knowledge, is the first to describe laparoscopic sleeve gastrectomy without over-sewing the staple line, no post-operative anticoagulation, no UGI series on POD#1, and discharge home on POD#1 with no major complications.

  7. Retention of Provitamin A Carotenoids in Staple Crops Targeted for Biofortification in Africa: Cassava, Maize and Sweet Potato

    Science.gov (United States)

    De Moura, Fabiana F.; Miloff, Alexander; Boy, Erick

    2015-01-01

    HarvestPlus, part of the Consultative Group on Internation Agriculture research (CGIAR) Program on Agriculture for Nutrition and Health (A4NH) uses conventional plant breeding techniques to develop staple food crops that are rich in micronutrients, a food-based approach to reduce micronutrient malnutrition known as biofortification. The nutritional breeding targets are established based on the food intake of target populations, nutrient losses during storage and processing and bioavailability. This review collates the evidence on the retention of provitamin A carotenoid (pVAC) after processing, cooking, and storing of the staple crops targeted for pVAC biofortification: cassava, maize, and sweet potato. Sun drying was more detrimental to the pVAC levels (27–56% retention) in cassava than shade (59%) or oven (55–91%) drying, while the pVAC retention levels (66–96%) in sweet potato were not significantly different among the various drying methods. Overall, boiling and steaming had higher pVAC retention (80–98%) compared to baking (30–70%) and frying (18–54%). Gari, the most frequently consumed form of cassava in West Africa had the lowest pVAC retention (10–30%). The pVAC retention of maize grain and cassava and sweet potato flour reached levels as low as 20% after 1–4 months of storage and was highly dependent on genotype. Therefore, we recommend that an evaluation of the pVAC degradation rate among different genotypes be performed before a high pVAC crop is promoted. PMID:24915386

  8. Midterm outcome of stapled transanal rectal resection for obstructed defecation syndrome: a single-institution experience in China.

    Science.gov (United States)

    Zhang, Bin; Ding, Jian-Hua; Zhao, Yu-Juan; Zhang, Meng; Yin, Shu-Hui; Feng, Ying-Ying; Zhao, Ke

    2013-10-14

    To assess midterm results of stapled transanal rectal resection (STARR) for obstructed defecation syndrome (ODS) and predictive factors for outcome. From May 2007 to May 2009, 75 female patients underwent STARR and were included in the present study. Preoperative and postoperative workup consisted of standardized interview and physical examination including proctoscopy, colonoscopy, anorectal manometry, and defecography. Clinical and functional results were assessed by standardized questionnaires for the assessment of constipation constipation scoring system (CSS), Longo's ODS score, and symptom severity score (SSS), incontinence Wexner incontinence score (WS), quality of life Patient Assessment of Constipation-Quality of Life Questionnaire (PAC-QOL), and patient satisfaction visual analog scale (VAS). Data were collected prospectively at baseline, 12 and 30 mo. The median follow-up was 30 mo (range, 30-46 mo). Late postoperative complications occurred in 11 (14.7%) patients. Three of these patients required procedure-related reintervention (one diverticulectomy and two excision of staple granuloma). Although the recurrence rate was 10.7%, constipation scores (CSS, ODS score and SSS) significantly improved after STARR (P < 0.0001). Significant reduction in ODS symptoms was matched by an improvement in the PAC-QOL and VAS (P < 0.0001), and the satisfaction index was excellent in 25 (33.3%) patients, good in 23 (30.7%), fairly good in 14 (18.7%), and poor in 13 (17.3%). Nevertheless, the WS increased after STARR (P = 0.0169). Incontinence was present or deteriorated in 8 (10.7%) patients; 6 (8%) of whom were new onsets. Univariate analysis revealed that the occurrence of fecal incontinence (preoperative, postoperative or new-onset incontinence; P = 0.028, 0.000, and 0.007, respectively) was associated with the success of the operation. STARR is an acceptable procedure for the surgical correction of ODS. However, its impact on symptomatic recurrence and postoperative

  9. Association between the frequency of meals combining "Shushoku, Shusai, and Hukusai" (Staple food, main dish, and side dish) and intake of nutrients and food groups among Japanese young adults aged 18-24 years: a cross-sectional study.

    Science.gov (United States)

    Kakutani, Yuya; Kamiya, Saori; Omi, Naomi

    2015-01-01

    "Shushoku," "Shusai," and "Hukusai" are staple food, main dish, and side dish, respectively. The recommended meal in Japan is a combination of "Shushoku," "Shusai," and "Hukusai"; however, it remains unclear whether there is an association between the frequency of these meals and intake of nutrients and food groups. This cross-sectional study examined the association between the frequency of meals combining "Shushoku, Shusai, and Hukusai" and intake of nutrients and food groups among 664 Japanese young adults aged 18-24 y. The dietary habits of the subjects during the preceding month were assessed using a validated brief-type self-administered diet history questionnaire. The frequency of meals combining "Shushoku, Shusai, and Hukusai" was self-reported according to four categories: "less than 1 d or 1 d/wk," "2 or 3 d/wk," "4 or 5 d/wk," and "every day." In both women and men, there was an association between the higher frequency of these meals and higher intake of the following food groups: pulses, green and yellow vegetables, other vegetables, mushrooms, seaweeds, fish and shellfish, and eggs. Moreover, there was an association with higher intake of protein, polyunsaturated fat, n-6 and n-3 polyunsaturated fat, total dietary fiber, soluble and insoluble dietary fiber, β-carotene, α-tocopherol, vitamin K, thiamin, riboflavin, folate, pantothenic acid, vitamin C, potassium, calcium, magnesium, iron, and copper, and lower intake of carbohydrate in both women and men. Our findings support the hypothesis that the meals combining "Shushoku, Shusai, and Hukusai" may be associated with intake of many food groups and nutrients among Japanese young adults.

  10. The physical theory and propagation model of THz atmospheric propagation

    Science.gov (United States)

    Wang, R.; Yao, J. Q.; Xu, D. G.; Wang, J. L.; Wang, P.

    2011-02-01

    Terahertz (THz) radiation is extensively applied in diverse fields, such as space communication, Earth environment observation, atmosphere science, remote sensing and so on. And the research on propagation features of THz wave in the atmosphere becomes more and more important. This paper firstly illuminates the advantages and outlook of THz in space technology. Then it introduces the theoretical framework of THz atmospheric propagation, including some fundamental physical concepts and processes. The attenuation effect (especially the absorption of water vapor), the scattering of aerosol particles and the effect of turbulent flow mainly influence THz atmosphere propagation. Fundamental physical laws are illuminated as well, such as Lamber-beer law, Mie scattering theory and radiative transfer equation. The last part comprises the demonstration and comparison of THz atmosphere propagation models like Moliere(V5), SARTre and AMATERASU. The essential problems are the deep analysis of physical mechanism of this process, the construction of atmospheric propagation model and databases of every kind of material in the atmosphere, and the standardization of measurement procedures.

  11. Soil and vegetation surveillance

    Energy Technology Data Exchange (ETDEWEB)

    Antonio, E.J.

    1995-06-01

    Soil sampling and analysis evaluates long-term contamination trends and monitors environmental radionuclide inventories. This section of the 1994 Hanford Site Environmental Report summarizes the soil and vegetation surveillance programs which were conducted during 1994. Vegetation surveillance is conducted offsite to monitor atmospheric deposition of radioactive materials in areas not under cultivation and onsite at locations adjacent to potential sources of radioactivity.

  12. The Impact of Nitinol Staples on the Compressive Forces, Contact Area, and Mechanical Properties in Comparison to a Claw Plate and Crossed Screws for the First Tarsometatarsal Arthrodesis.

    Science.gov (United States)

    Aiyer, Amiethab; Russell, Nicholas A; Pelletier, Matthew H; Myerson, Mark; Walsh, William R

    2016-06-01

    Background The optimal fixation method for the first tarsometatarsal arthrodesis remains controversial. This study aimed to develop a reproducible first tarsometatarsal testing model to evaluate the biomechanical performance of different reconstruction techniques. Methods Crossed screws or a claw plate were compared with a single or double shape memory alloy staple configuration in 20 Sawbones models. Constructs were mechanically tested in 4-point bending to 1, 2, and 3 mm of plantar displacement. The joint contact force and area were measured at time zero, and following 1 and 2 mm of bending. Peak load, stiffness, and plantar gapping were determined. Results Both staple configurations induced a significantly greater contact force and area across the arthrodesis than the crossed screw and claw plate constructs at all measurements. The staple constructs completely recovered their plantar gapping following each test. The claw plate generated the least contact force and area at the joint interface and had significantly greater plantar gapping than all other constructs. The crossed screw constructs were significantly stiffer and had significantly less plantar gapping than the other constructs, but this gapping was not recoverable. Conclusions Crossed screw fixation provides a rigid arthrodesis with limited compression and contact footprint across the joint. Shape memory alloy staples afford dynamic fixation with sustained compression across the arthrodesis. A rigid polyurethane foam model provides an anatomically relevant comparison for evaluating the interface between different fixation techniques. Clinical Relevance The dynamic nature of shape memory alloy staples offers the potential to permit early weight bearing and could be a useful adjunctive device to impart compression across an arthrodesis of the first tarsometatarsal joint. Therapeutic, Level V: Bench testing. © 2015 The Author(s).

  13. Health-related quality of life in children with objectively diagnosed staple food allergy assessed with a disease-specific questionnaire.

    Science.gov (United States)

    Protudjer, J L P; Jansson, S-A; Östblom, E; Arnlind, M Heibert; Bengtsson, U; Dahlén, S-E; Kallström-Bengtsson, I; Marklund, B; Middelveld, R J M; Rentzos, G; Sundqvist, A C; Åkerström, J; Ahlstedt, S

    2015-10-01

    Among Swedish children of 0-12 years old, we investigated various food allergy-related exposures associated with health-related quality of life using a food allergy-specific questionnaire among children allergic to the staple foods cow's milk, hen's egg and/or wheat, and contextualised worse food allergy-associated health-related quality of life using a generic questionnaire versus controls. In total, 85 children with objectively diagnosed allergy to the staple foods were included as cases, and 94 children matched for age and sex were included as controls. We administered a food allergy-specific parent-completed questionnaire originally developed by EuroPrevall to cases only, and a generic health-related quality of life questionnaire (EuroQol Health Questionnaire, 5 Dimensions; EQ 5-D); to both cases and controls. Hen's egg was the most common offending staple food, affecting 76% of cases. Approximately 7% of cases were allergic to all three staple foods. Parent-reported respiratory and cardiovascular symptoms were associated with worse health-related quality of life. Elements of disease severity [previous anaphylaxis (p quality of life. Cases had worse health-related quality of life measured by the EQ-5D compared to controls (p children with objectively diagnosed allergy to the staple foods cow's milk, hen's egg and/or wheat is associated with worse health-related quality of life. The use of a generic questionnaire confirmed that cases have worse health-related quality of life than controls. ©2015 Foundation Acta Paediatrica. Published by John Wiley & Sons Ltd.

  14. Comparison between stainless steel staples and silk sutures for primary closure of skin in patients undergoing neck dissection: A comparative clinical study

    Directory of Open Access Journals (Sweden)

    Abhishek Ghosh

    2015-01-01

    Full Text Available Introduction: Comparison between stainless steel staples and silk sutures for primary closure of skin in patients undergoing neck dissection, in context of rapid application, approximation of the skin edges, economy and aesthetics of the resultant scar. Aim: (1 To compare surgical stainless steel staples and silk sutures for primary wound closure, with respect to presence/absence of wound infection and dehiscence (2 To compare the resultant scar following the two different methods of the closure at 3 rd month postoperatively with the help of visual analog scale and analyze the result statistically Design: This study was designed to compare skin closure using staples and silk sutures in patients undergoing neck dissection, using both methods in one-half of the same wound; thus each wound affording its own control. Materials and Methods: The study was conducted on patients requiring collar line incision (high submandibular incision with or without a cephalad extension of midline lower lip split incision for surgical access, who presented to the Department of Oral and Maxillo-Facial Surgery. (1 Sample size: 10 (2 Study design: Prospective Comparative study (3 Study duration: One and half years (4 Surgical stainless steel staples: Proximate Plus MD 35 W, Ethicon Endo Surgery (5 Sutures: 3-0 Ethiprime NW 5003, Non-Absorbable Surgical Suture, Mersilk-90 cm, Ethicon, (16 mm 3/8 circle cutting needle. Conclusion: It wass concluded that there is no significant difference between the scars observed in the regions of incision which underwent primary closure by two different methods, that is surgical stainless steel staples and 3-0 Mersilk Sutures.

  15. In vitro propagation and organogenesis of Lilium 'Prato' | El-Naggar ...

    African Journals Online (AJOL)

    Lilium consists of more than 80 species native to the Northern Hemisphere. It is widely used as cut flowers, flowering potted and garden plants. Since Lilium in vitro production, as an alternative to the conventional vegetative propagation methods is becoming an important way to increase shoot proliferation rates; therefore, ...

  16. Vegetation survey: a new focus for Applied Vegetation Science

    NARCIS (Netherlands)

    Chytry, M.; Schaminee, J.H.J.; Schwabe, A.

    2011-01-01

    Vegetation survey is an important research agenda in vegetation science. It defines vegetation types and helps understand differences among them, which is essential for both basic ecological research and applications in biodiversity conservation and environmental monitoring. In this editorial, we

  17. Propagating Class and Method Combination

    DEFF Research Database (Denmark)

    Ernst, Erik

    1999-01-01

    This paper presents a mixin based class and method combination mechanism with block structure propagation. Traditionally, mixins can be composed to form new classes, possibly merging the implementations of methods (as in CLOS). In our approach, a class or method combination operation may cause any...... number of implicit combinations. For example, it is possible to specify separate aspects of a family of classes, and then combine several aspects into a full-fledged class family. The combination expressions would explicitly combine whole-family aspects, and by propagation implicitly combine the aspects...... for each member of the class family, and again by propagation implicitly compose each method from its aspects. As opposed to CLOS, this is type-checked statically; and as opposed to other systems for advanced class combination/ merging/weaving, it is integrated directly in the language, ensuring a clear...

  18. Wave propagation in ballistic gelatine.

    Science.gov (United States)

    Naarayan, Srinivasan S; Subhash, Ghatu

    2017-04-01

    Wave propagation characteristics in long cylindrical specimens of ballistic gelatine have been investigated using a high speed digital camera and hyper elastic constitutive models. The induced transient deformation is modelled with strain rate dependent Mooney-Rivlin parameters which are determined by modelling the stress-strain response of gelatine at a range of strain rates. The varying velocity of wave propagation through the gelatine cylinder is derived as a function of prestress or stretch in the gelatine specimen. A finite element analysis is conducted using the above constitutive model by suitably defining the impulse imparted by the polymer bar into the gelatine specimen. The model results are found to capture the experimentally observed wave propagation characteristics in gelatine effectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Signal propagation in nerve fiber

    Science.gov (United States)

    Zayko, Yuriy N.

    2007-05-01

    In this paper the problem of signal propagation in nerve fiber is considered. Ohm losses and heat processes were taken into account. These permit to combine the two stages (metabolic and non-metabolic) of propagation and Na + and K + ions transmission through cell membrane due propagation. Electrodynamics of nerve fiber with losses is described by telegraph equations. Heat processes in fiber are described by an equation of entropy transfer. Ion motion at metabolic stage against the electro-chemical potential is described by negative conductance, responsible for the escape flow. The running- wave-type solutions of these equations are studied. An integral and an explicit solution of the given system are obtained. The solution represented by a series of quasi-harmonic pulses is investigated numerically. This proves the applicability of telegraph equation to the problem considered. Different types of solitary waves corresponding to various types of conductivity are also investigated.

  20. Propagation of Cigarette Static Burn

    Directory of Open Access Journals (Sweden)

    Miura K

    2014-12-01

    Full Text Available A propagation model of cigarette static burn at the cigarette periphery is proposed. Propagation of cigarette static burn is characterized by intermittent burn of the cigarette paper. The burning rate depends on the period of flash burn of the paper and is independent of the burning width. By measuring the local temperature near the front line of the burning propagation, the rate-determining step was identified as the time required to ignite the paper. A mathematical analysis was performed by calculating the heat transfer at the periphery during the paper heating period, and it was revealed that the thermal properties of the cigarette are the dominant factors of cigarette static burn. Modeling results showed good agreement with measured data.

  1. Wind Turbine Noise and Natural Sounds: Masking, Propagation and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Bolin, Karl

    2009-05-15

    Wind turbines are an environmentally friendly and sustainable power source. Unfortunately, the noise impact can cause deteriorated living conditions for nearby residents. The audibility of wind turbine sound is influenced by ambient sound. This thesis deals with some aspects of noise from wind turbines. Ambient sounds influence the audibility of wind turbine noise. Models for assessing two commonly occurring natural ambient sounds namely vegetation sound and sound from breaking waves are presented in paper A and B. A sound propagation algorithm has been compared to long range measurements of sound propagation in paper C. Psycho-acoustic tests evaluating the threshold and partial loudness of wind turbine noise when mixed with natural ambient sounds have been performed. These are accounted for in paper D. The main scientific contributions are the following.Paper A: A semi-empiric prediction model for vegetation sound is proposed. This model uses up-to-date simulations of wind profiles and turbulent wind fields to estimate sound from vegetation. The fluctuations due to turbulence are satisfactory estimated by the model. Predictions of vegetation sound also show good agreement to measured spectra. Paper B: A set of measurements of air-borne sound from breaking waves are reported. From these measurements a prediction method of sound from breaking waves is proposed. Third octave spectra from breaking waves are shown to depend on breaker type. Satisfactory agreement between predictions and measurements has been achieved. Paper C: Long range sound propagation over a sea surface was investigated. Measurements of sound transmission were coordinated with local meteorological measurements. A sound propagation algorithm has been compared to the measured sound transmission. Satisfactory agreement between measurements and predictions were achieved when turbulence were taken into consideration in the computations. Paper D: The paper investigates the interaction between wind

  2. Wave equations for pulse propagation

    Energy Technology Data Exchange (ETDEWEB)

    Shore, B.W.

    1987-06-24

    Theoretical discussions of the propagation of pulses of laser radiation through atomic or molecular vapor rely on a number of traditional approximations for idealizing the radiation and the molecules, and for quantifying their mutual interaction by various equations of propagation (for the radiation) and excitation (for the molecules). In treating short-pulse phenomena it is essential to consider coherent excitation phenomena of the sort that is manifest in Rabi oscillations of atomic or molecular populations. Such processes are not adequately treated by rate equations for excitation nor by rate equations for radiation. As part of a more comprehensive treatment of the coupled equations that describe propagation of short pulses, this memo presents background discussion of the equations that describe the field. This memo discusses the origin, in Maxwell's equations, of the wave equation used in the description of pulse propagation. It notes the separation into lamellar and solenoidal (or longitudinal and transverse) and positive and negative frequency parts. It mentions the possibility of separating the polarization field into linear and nonlinear parts, in order to define a susceptibility or index of refraction and, from these, a phase and group velocity. The memo discusses various ways of characterizing the polarization characteristics of plane waves, that is, of parameterizing a transverse unit vector, such as the Jones vector, the Stokes vector, and the Poincare sphere. It discusses the connection between macroscopically defined quantities, such as the intensity or, more generally, the Stokes parameters, and microscopic field amplitudes. The material presented here is a portion of a more extensive treatment of propagation to be presented separately. The equations presented here have been described in various books and articles. They are collected here as a summary and review of theory needed when treating pulse propagation.

  3. Vegetable Production System (Veggie)

    Science.gov (United States)

    Levine, Howard G.; Smith, Trent M.

    2016-01-01

    The Vegetable Production System (Veggie) was developed by Orbital Technologies Corp. to be a simple, easily stowed, and high growth volume yet low resource facility capable of producing fresh vegetables on the International Space Station (ISS). In addition to growing vegetables in space, Veggie can support a variety of experiments designed to determine how plants respond to microgravity, provide real-time psychological benefits for the crew, and conduct outreach activities. Currently, Veggie provides the largest volume available for plant growth on the ISS.

  4. Trust Propagation in Small Worlds

    DEFF Research Database (Denmark)

    Gray, Elizabeth; Seigneur, Jean-Marc; Chen, Yong

    2003-01-01

    do not scale well. We aim to develop trust-based security mechanisms using small world concepts to optimise formation and propagation of trust amongst entities in these vast networks. In this regard, we surmise that in a very large mobile ad hoc network, trust, risk, and recommendations can...... be propagated through relatively short paths connecting entities. Our work describes the design of trust-formation and risk-assessment systems, as well as that of an entity recognition scheme, within the context of the small world network topology....

  5. Vegetation survey of Sengwa

    Directory of Open Access Journals (Sweden)

    G. C. Craig

    1983-12-01

    Full Text Available The approach and initial results of a vegetation survey of the Sengwa Wildlife Area are outlined. The objectives were to produce a vegetation classification and map sufficiently detailed to serve as a base for the management of the natural vegetation. The methods adopted consist of (a stratification of the area into homogeneous units using 1:10 000 colour aerial photographs; (b plotless random sampling of each stratum by recording cover abundance on the Braun-Blaunquet scale for all woody species; and (c analysis of the data by indicator species analysis using the computer programme 'Twinspan’. The classification produced is successful in achieving recognizable vegetation types which tie in well with known environmental features.

  6. Total Vegetation 1992

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The coverage contains 1992 vegetation polygons representing GCES monitoring sites. These data were developed by Dr. G. Waring Northern AZ. University for use in the...

  7. Total Vegetation 1984

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The coverage contains 1984 vegetation polygons representing GCES monitoring sites. These data were developed as study by Dr. G. Waring Northern AZ. University of...

  8. Total Vegetation 1965

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The coverage contains 1965 vegetation polygons representing GCES monitoring sites. These data were developed as study by Dr. G. Waring Northern AZ. University of...

  9. Total Vegetation 1973

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The coverage contains 1973 vegetation polygons representing GCES monitoring sites. These data were developed as study by Dr. G. Waring Northern AZ. University of...

  10. Description of vegetation types

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document provides descriptions of five vegetation types found in Iowa- oak savannah, mature hardwoods, floodplain woods, scrub woods, and riparian woods. Oak...

  11. Vegetable Oil-Biorefinery.

    Science.gov (United States)

    Pudel, Frank; Wiesen, Sebastian

    2017-03-07

    Conventional vegetable oil mills are complex plants, processing oil, fruits, or seeds to vegetable fats and oils of high quality and predefined properties. Nearly all by-products are used. However, most of the high valuable plant substances occurring in oil fruits or seeds besides the oil are used only in low price applications (proteins as animal feeding material) or not at all (e.g., phenolics). This chapter describes the state-of-the-art of extraction and use of oilseed/oil fruit proteins and phyto-nutrients in order to move from a conventional vegetable oil processing plant to a proper vegetable oil-biorefinery producing a wide range of different high value bio-based products.

  12. Gluon propagator at finite temperature

    Energy Technology Data Exchange (ETDEWEB)

    Mandula, J.E.; Ogilvie, M.

    1988-01-28

    The Landau gauge gluon propagator at finite temperature above and below the deconfinement transition is measured using lattice Monte Carlo simulation. The color electric and magnetic masses are determined. The most striking result of the calculation is that the time component of the gluon field appears to acquire a vacuum expected value in the deconfined region.

  13. Near earth propagation: physics revealed

    Science.gov (United States)

    Wert, R.; Goroch, A.; Worthington, E.; Wong, V.

    2007-04-01

    Both the military and consumer sectors are pursuing distributed networked systems and sensors. A major stumbling block to deployment of these sensors will be the radio frequency (RF) propagation environment within a few wavelengths of the earth. Increasing transmit power (battery consumption) is not a practical solution to the problem. This paper will discuss some of the physical phenomena related to the near earth propagation (NEP) problem. When radiating near the earth the communications link is subjected to a list of physical impairments. On the list are the expected Fresnel region encroachment and multipath reflections. Additionally, radiation pattern changes and near earth boundary layer perturbations exist. A significant amount of data has been collected on NEP. Disturbances in the NEP atmosphere can have a time varying attenuation related to the time of day and these discoveries will be discussed. Solutions, or workarounds, to the near earth propagation problem hinge on dynamic adaptive RF elements. Adaptive RF elements will allow the distributed sensor to direct energy, beam form, impedance correct, increase communication efficiency, and decrease battery consumption. Small electrically controllable elements are under development to enable antenna impedance matching in a dynamic environment. Additionally, small dynamic beam forming arrays are under development to focus RF energy in the direction of need. With an increased understanding of the near earth propagation problem, distributed autonomous networked sensors can become a reality within a few centimeters of the earth.

  14. Invisibility cloaking without superluminal propagation

    Energy Technology Data Exchange (ETDEWEB)

    Perczel, Janos; Leonhardt, Ulf [School of Physics and Astronomy, University of St Andrews, North Haugh, St Andrews KY16 9SS (United Kingdom); Tyc, Tomas, E-mail: jp394@st-andrews.ac.uk, E-mail: tomtyc@physics.muni.cz, E-mail: ulf@st-andrews.ac.uk [Faculty of Science, Kotlarska 2 and Faculty of Informatics, Botanicka 68a, Masaryk University, 61137 Brno (Czech Republic)

    2011-08-15

    Conventional cloaking based on Euclidean transformation optics requires that the speed of light should tend to infinity on the inner surface of the cloak. Non-Euclidean cloaking still needs media with superluminal propagation. Here we show by giving an example that this is no longer necessary.

  15. Wave equations for pulse propagation

    Science.gov (United States)

    Shore, B. W.

    1987-06-01

    Theoretical discussions of the propagation of pulses of laser radiation through atomic or molecular vapor rely on a number of traditional approximations for idealizing the radiation and the molecules, and for quantifying their mutual interaction by various equations of propagation (for the radiation) and excitation (for the molecules). In treating short-pulse phenomena it is essential to consider coherent excitation phenomena of the sort that is manifest in Rabi oscillations of atomic or molecular populations. Such processes are not adequately treated by rate equations for excitation nor by rate equations for radiation. As part of a more comprehensive treatment of the coupled equations that describe propagation of short pulses, this memo presents background discussion of the equations that describe the field. This memo discusses the origin, in Maxwell's equations, of the wave equation used in the description of pulse propagation. It notes the separation into lamellar and solenoidal (or longitudinal and transverse) and positive and negative frequency parts. It mentions the possibility of separating the polarization field into linear and nonlinear parts, in order to define a susceptibility or index of refraction and, from these, a phase and group velocity.

  16. Ultraviolet asymptotics of glueball propagators

    Science.gov (United States)

    Bochicchio, Marco; Muscinelli, Samuele P.

    2013-08-01

    We point out that perturbation theory in conjunction with the renormalization group ( RG) puts a severe constraint on the structure of the large- N non-perturbative glueball propagators in SU( N) pure Y M, in QCD and in = 1 SU SY QCD with massless quarks, or in any confining asymptotically-free gauge theory massless in perturbation theory. For the scalar and pseudoscalar glueball propagators in pure Y M and QCD with massless quarks we check in detail the RG-improved estimate to the order of the leading and next-to-leading logarithms by means of a remarkable three-loop computation by Chetyrkin et al. We investigate as to whether the aforementioned constraint is satisfied by any of the scalar or pseudoscalar glueball propagators computed in the framework of the AdS String/ large- N Gauge Theory correspondence and of a recent proposal based on a Topological Field Theory underlying the large- N limit of Y M . We find that none of the proposals for the scalar or the pseudoscalar glueball propagators based on the AdS String/large- N Gauge Theory correspondence satisfies the constraint, actually as expected, since the gravity side of the correspondence is in fact strongly coupled in the ultraviolet. On the contrary, the Topological Field Theory satisfies the constraint that follows by the asymptotic freedom.

  17. Radio frequency propagation made easy

    CERN Document Server

    Faruque, Saleh

    2015-01-01

    This book introduces Radio Frequency Propagation to a broad audience.  The author blends theory and practice to bring readers up-to-date in key concepts, underlying principles and practical applications of wireless communications.  The presentation is designed to be easily accessible, minimizing mathematics and maximizing visuals.

  18. Assessment of the hybrid propagation model, Volume 1: Analysis of noise propagation effects

    Science.gov (United States)

    2012-08-31

    This is the first of two volumes of a report on the Hybrid Propagation Model (HPM), an advanced prediction model for aviation noise propagation. This volume presents the noise level predictions for eleven different sets of propagation conditions, run...

  19. Vegetation Use for Resolving Electromagnetic Compatibility and Ecology Issues

    Science.gov (United States)

    Zvezdina, M. Yu; Shokova, Yu A.; Cherckesova, L. V.; Golovko, T. M.; Cherskaya, A. A.

    2017-05-01

    The wide spread of Information and Communication Technologies and the development of Internet-enabled mobile applications have aggravated electromagnetic compatibility and ecology problems. Inability to excite electromagnetic field of a desired structure and strength with traditional approaches actualizes additional actions, including providing diffraction on propagation path, to resolve these issues. Diffraction on a stand-alone obstacle along the propagation path and the one on set of obstacles near receive antenna location can be considered as the additional actions in ultrashort band. The accomplished studies have shown that one the most effective means to lower electromagnetic field strength is to shield the receive antenna with vegetation from jamming radio equipment. Moreover, vegetation resolves electromagnetic ecology issues, for the energy flux density can be lowered by about two orders of magnitude.

  20. The Integration of Technology and Management in the Competitiveness of the United States Short Staple Yarn Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Suvalee T. Tangboonritruthai

    2014-01-01

    Full Text Available The purpose of this research was to investigate whether a balance of technology and management could be used in order to sustain a viable United States (US short staple yarn production industry. The methodology used in this study consisted of primary research comprising two phases. The first phase consisted of interviews with industry executives in order to find out what US yarn manufacturers think are the important factors in maintaining a competitive yarn industry. The second phase was an online survey with industry customers in order to find out why weavers and knitters buy from US manufacturers. Results reveal that US manufacturers have competitive advantages over other countries because of skill level of workforce, variety of products offered, customer relationships, innovation and technology, and product quality. In order to keep these competitive advantages, “technology” and “management” strategies should be implemented. Results also reveal the areas in which the US yarn manufacturers should focus their resources in order to stay competitive or indeed survive.

  1. Predisposition to insulin resistance and obesity due to staple consumption of rice: Amylose content versus germination status.

    Science.gov (United States)

    Abubakar, Bilyaminu; Zawawi, Norhasnida; Omar, Abdul Rahman; Ismail, Maznah

    2017-01-01

    Type 2 diabetes is a metabolic disorder with established, well-defined precursors. Obesity and insulin resistance are amongst most important factors in predisposition to diabetes. Rice is a staple for about half the global population and its consumption has been strongly linked with diabetogenesis. We assert that tackling the prevalence of predisposing factors by modifying certain rice cultivars could reduce the global burden of obesity and insulin resistance, and by extension type 2 diabetes. Several rice cultivars with various properties were fed to nulliparous rats (five weeks old at the start of the experiment) for 90 days. They were then returned to a diet of standard pellets and mated with males raised on a standard diet. The resulting pups and dams were investigated for obesity and insulin resistance markers. We found that germination did more to reduce predisposition to obesity and insulin resistance than high amylose content. The combined reducing effect of germination and high amylose content on predisposition to obesity and insulin resistance was greater than the sum of their independent effects. Polished (white) rice with a low amylose content predisposed dams on a high-fat diet to markers of insulin resistance and obesity and this predisposition was inherited (in biochemical terms) by their F1 offspring. Overall, the results suggest that harnessing the beneficial properties of germination and amylose in rice would reduce the burden of obesity and insulin resistance, which are known to be key risk factors for development of type 2 diabetes.

  2. Factors Predicting Difficulty of Laparoscopic Low Anterior Resection for Rectal Cancer with Total Mesorectal Excision and Double Stapling Technique.

    Directory of Open Access Journals (Sweden)

    Weiping Chen

    Full Text Available Laparoscopic sphincter-preserving low anterior resection for rectal cancer is a surgery demanding great skill. Immense efforts have been devoted to identifying factors that can predict operative difficulty, but the results are inconsistent.Our study was conducted to screen patients' factors to build models for predicting the operative difficulty using well controlled data.We retrospectively reviewed records of 199 consecutive patients who had rectal cancers 5-8 cm from the anal verge. All underwent laparoscopic sphincter-preserving low anterior resections with total mesorectal excision (TME and double stapling technique (DST. Data of 155 patients from one surgeon were utilized to build models to predict standardized endpoints (operative time, blood loss and postoperative morbidity. Data of 44 patients from other surgeons were used to test the predictability of the built models.Our results showed prior abdominal surgery, preoperative chemoradiotherapy, tumor distance to anal verge, interspinous distance, and BMI were predictors for the standardized operative times. Gender and tumor maximum diameter were related to the standardized blood loss. Temporary diversion and tumor diameter were predictors for postoperative morbidity. The model constructed for the operative time demonstrated excellent predictability for patients from different surgeons.With a well-controlled patient population, we have built a predictable model to estimate operative difficulty. The standardized operative time will make it possible to significantly increase sample size and build more reliable models to predict operative difficulty for clinical use.

  3. Perioperative topical nitrate and sphincter function in patients undergoing transanal stapled anastomosis: a randomized, placebo-controlled, double-blinded trial.

    LENUS (Irish Health Repository)

    Winter, D C

    2012-02-03

    PURPOSE: The use of transanal stapling devices may impair continence because of digital dilatation and\\/or instrumentation. This study assessed the effect of pharmacological dilatation of the sphincter prior to stapler insertion. METHODS: A randomized, placebo-controlled, double-blinded study of 60 patients undergoing transanal stapled anastomosis was undertaken. Consenting patients were randomly assigned to receive a single intraoperative dose of topical 0.2 percent nitroglycerin (glyceryl trinitrate) ointment or nitroglycerin-free placebo. All patients were assessed preoperatively and postoperatively by clinical methods (Wexner incontinence scores and examination), anorectal manometry by a station pull-through technique, and endoanal ultrasonography. RESULTS: Intraoperative mean (+\\/-SEM) resting pressures (mmHg) were significantly reduced by nitroglycerin compared with prenitroglycerin levels (9.9 +\\/- 0.9 vs. 50.5 +\\/- 2.7; P = 0.002) or controls (56.0 +\\/- 3.2; P = 0.001). Twenty-one of the 28 controls (75 percent) but only 4 of the 32 patients in the nitroglycerin group (12.5 percent) required digital dilatation to insert the stapling instrument ( P = 0.003). Squeeze pressures were unaltered by the intervention but mean resting pressures were higher in the nitroglycerin group postoperatively (52.9 +\\/- 3.2 - 31.6 +\\/- 1.3 = 21.3 mmHg; 95 percent confidence interval, 14-27). Incontinence scores were lower in the nitroglycerin group at the 3-month (1.1 +\\/- 0.2 vs. 4.6 +\\/- 0.3; P = 0.003) and 12-month (0.9 +\\/- 0.1 vs. 4.4 +\\/- 0.3; P = 0.002) clinic visits. CONCLUSION: Preoperative nitroglycerin dilatation protects sphincter function in patients undergoing transanal stapled anastomoses.

  4. Stapled Voltage-Gated Calcium Channel (CaV) α-Interaction Domain (AID) Peptides Act As Selective Protein-Protein Interaction Inhibitors of CaV Function.

    Science.gov (United States)

    Findeisen, Felix; Campiglio, Marta; Jo, Hyunil; Abderemane-Ali, Fayal; Rumpf, Christine H; Pope, Lianne; Rossen, Nathan D; Flucher, Bernhard E; DeGrado, William F; Minor, Daniel L

    2017-06-21

    For many voltage-gated ion channels (VGICs), creation of a properly functioning ion channel requires the formation of specific protein-protein interactions between the transmembrane pore-forming subunits and cystoplasmic accessory subunits. Despite the importance of such protein-protein interactions in VGIC function and assembly, their potential as sites for VGIC modulator development has been largely overlooked. Here, we develop meta-xylyl (m-xylyl) stapled peptides that target a prototypic VGIC high affinity protein-protein interaction, the interaction between the voltage-gated calcium channel (CaV) pore-forming subunit α-interaction domain (AID) and cytoplasmic β-subunit (CaVβ). We show using circular dichroism spectroscopy, X-ray crystallography, and isothermal titration calorimetry that the m-xylyl staples enhance AID helix formation are structurally compatible with native-like AID:CaVβ interactions and reduce the entropic penalty associated with AID binding to CaVβ. Importantly, electrophysiological studies reveal that stapled AID peptides act as effective inhibitors of the CaVα1:CaVβ interaction that modulate CaV function in an CaVβ isoform-selective manner. Together, our studies provide a proof-of-concept demonstration of the use of protein-protein interaction inhibitors to control VGIC function and point to strategies for improved AID-based CaV modulator design.

  5. Fish sauce, soy sauce, and vegetable oil fortification in Cambodia: where do we stand to date?

    Science.gov (United States)

    Theary, Chan; Panagides, Dora; Laillou, Arnaud; Vonthanak, Saphoon; Kanarath, Chheng; Chhorvann, Chhea; Sambath, Pol; Sowath, Sol; Moench-Pfanner, Regina

    2013-06-01

    The prevalence of micronutrient deficiencies in Cambodia is among the highest in Southeast Asia. Fortification of staple foods and condiments is considered to be one of the most cost-effective strategies for addressing micronutrient deficiencies at the population level. The Government of Cambodia has recognized the importance of food fortification as one strategy for improving the nutrition security of its population. This paper describes efforts under way in Cambodia for the fortification of fish sauce, soy sauce, and vegetable oil. Data were compiled from a stability test of Cambodian fish sauces fortified with sodium iron ethylenediaminetetraacetate (NaFeEDTA); analysis of fortified vegetable oils in the Cambodian market; a Knowledge, Attitudes, and Practices (KAP) study of fortified products; and food fortification program monitoring documents. At different levels of fortification of fish sauce with NaFeEDTA, sedimentation and precipitation were observed. This was taken into consideration in the government-issued standards for the fortification of fish sauce. All major brands of vegetable oil found in markets at the village and provincial levels are imported, and most are nonfortified. Fish sauce, soy sauce, and vegetable oil are widely consumed throughout Cambodia and are readily available in provincial and village markets. Together with an effective regulatory monitoring system, the government can guarantee that these commodities, whether locally produced or imported, are adequately fortified. A communications campaign would be worthwhile, once fortified commodities are available, as the KAP study found that Cambodians had a positive perception of fortified sauces.

  6. [Effects of a long-term intervention in a work cafeteria on employee vegetable intake].

    Science.gov (United States)

    Misawa, Akemi; Yoshita, Katsushi; Fukumura, Tomoe; Tanaka, Taichiro; Tamaki, Junko; Takebayashi, Toru; Kusaka, Yukinori; Nakagawa, Hideaki; Yamato, Hiroshi; Okayama, Akira; Miura, Katsuyuki; Okamura, Tomonori; Ueshima, Hirotsugu

    2015-01-01

    We examined the effects on employee vegetable intake of a long-term intervention in an employee work cafeteria. The subjects were approximately 1,200 employees (aged 19-61 years) of an industrial company in Fukui prefecture. We promoted the intake of typical Japanese style meals that combined three elements (staple foods, main dishes and vegetable dishes) to increase vegetables intake. We displayed all items on the menus of the employee cafeteria using three colors (yellow, red and green to denote three elements) to indicate healthy food choices for the maintenance of a healthy food environment. We advised employees to choose meals containing the three elements at the time of payment, for nutritional education (appropriate portion choice: APC). We evaluated the ratio of APC at the same time. To calculate the mean daily intake per person, we carried out a questionnaire survey similar to the "semi-quantitative food frequency questionnaire" and asked about the frequency and approximate intake of vegetables. The APC was 63.5% after one year of intervention, significantly increased to 82.1% after two years (p cafeteria.

  7. Atmospheric propagation of THz radiation.

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, Michael Clement; Mangan, Michael A.; Foltynowicz, Robert J.

    2005-11-01

    In this investigation, we conduct a literature study of the best experimental and theoretical data available for thin and thick atmospheres on THz radiation propagation from 0.1 to 10 THz. We determined that for thick atmospheres no data exists beyond 450 GHz. For thin atmospheres data exists from 0.35 to 1.2 THz. We were successful in using FASE code with the HITRAN database to simulate the THz transmission spectrum for Mauna Kea from 0.1 to 2 THz. Lastly, we successfully measured the THz transmission spectra of laboratory atmospheres at relative humidities of 18 and 27%. In general, we found that an increase in the water content of the atmosphere led to a decrease in the THz transmission. We identified two potential windows in an Albuquerque atmosphere for THz propagation which were the regions from 1.2 to 1.4 THz and 1.4 to 1.6 THz.

  8. Quantum noise and superluminal propagation

    Energy Technology Data Exchange (ETDEWEB)

    Segev, Bilha [Department of Chemistry, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva 84105, (Israel); Milonni, Peter W. [Theoretical Division (T-4), Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Babb, James F. [Institute for Theoretical Atomic and Molecular Physics, Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, Massachusetts 02138 (United States); Chiao, Raymond Y. [Department of Physics, University of California, Berkeley, Berkeley, California 94720 (United States)

    2000-08-01

    Causal ''superluminal'' effects have recently been observed and discussed in various contexts. The question arises whether such effects could be observed with extremely weak pulses, and what would prevent the observation of an ''optical tachyon.'' Aharonov, Reznik, and Stern (ARS) [Phys. Rev. Lett. 81, 2190 (1998)] have argued that quantum noise will preclude the observation of a superluminal group velocity when the pulse consists of one or a few photons. In this paper we reconsider this question both in a general framework and in the specific example, suggested by Chiao, Kozhekin, and Kurizki (CKK) [Phys. Rev. 77, 1254 (1996)], of off-resonant, short-pulse propagation in an optical amplifier. We derive in the case of the amplifier a signal-to-noise ratio that is consistent with the general ARS conclusions when we impose their criteria for distinguishing between superluminal propagation and propagation at the speed c. However, results consistent with the semiclassical arguments of CKK are obtained if weaker criteria are imposed, in which case the signal can exceed the noise without being ''exponentially large.'' We show that the quantum fluctuations of the field considered by ARS are closely related to superfluorescence noise. More generally, we consider the implications of unitarity for superluminal propagation and quantum noise and study, in addition to the complete and truncated wave packets considered by ARS, the residual wave packet formed by their difference. This leads to the conclusion that the noise is mostly luminal and delayed with respect to the superluminal signal. In the limit of a very weak incident signal pulse, the superluminal signal will be dominated by the noise part, and the signal-to-noise ratio will therefore be very small. (c) 2000 The American Physical Society.

  9. Interprocedural Analysis with Lazy Propagation

    DEFF Research Database (Denmark)

    Jensen, Simon Holm; Møller, Anders; Thiemann, Peter

    2010-01-01

    We propose lazy propagation as a technique for flow- and context-sensitive interprocedural analysis of programs with objects and first-class functions where transfer functions may not be distributive. The technique is described formally as a systematic modification of a variant of the monotone fr...... framework and its theoretical properties are shown. It is implemented in a type analysis tool for JavaScript where it results in a significant improvement in performance....

  10. Calculations of precursor propagation in dispersive dielectrics.

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, Larry Donald

    2003-08-01

    The present study is a numerical investigation of the propagation of electromagnetic transients in dispersive media. It considers propagation in water using Debye and composite Rocard-Powles-Lorentz models for the complex permittivity. The study addresses this question: For practical transmitted spectra, does precursor propagation provide any features that can be used to advantage over conventional signal propagation in models of dispersive media of interest? A companion experimental study is currently in progress that will attempt to measure the effects studied here.

  11. Propagating separable equalities in an MDD store

    DEFF Research Database (Denmark)

    Hadzic, Tarik; Hooker, John N.; Tiedemann, Peter

    2008-01-01

    We present a propagator that achieves MDD consistency for a separable equality over an MDD (multivalued decision diagram) store in pseudo-polynomial time. We integrate the propagator into a constraint solver based on an MDD store introduced in [1]. Our experiments show that the new propagator pro...... provides substantial computational advantage over propagation of two inequality constraints, and that the advantage increases when the maximum width of the MDD store increases....

  12. Fast Heat Pulse Propagation by Turbulence Spreading

    DEFF Research Database (Denmark)

    Naulin, Volker; Juul Rasmussen, Jens; Mantica, Paola

    2009-01-01

    The propagation of a cold pulse initiated by edge cooling in JET is compared to propagation of the heat wave originating from a modulation of the heating source roughly at mid radius. It is found that the propagation of the cold pulse is by far faster than what could be predicted on the basis of ...

  13. Propagation models for computing biochemical reaction networks

    OpenAIRE

    Henzinger, Thomas A; Mateescu, Maria

    2011-01-01

    We introduce propagation models, a formalism designed to support general and efficient data structures for the transient analysis of biochemical reaction networks. We give two use cases for propagation abstract data types: the uniformization method and numerical integration. We also sketch an implementation of a propagation abstract data type, which uses abstraction to approximate states.

  14. Wave propagation in thermoelastic saturated porous medium

    Indian Academy of Sciences (India)

    Biot 's theory for wave propagation in saturated porous solid is modified to study the propagation of thermoelastic waves in poroelastic medium. Propagation of plane harmonic waves is considered in isotropic poroelastic medium. Relations are derived among the wave-induced temperature in the medium and the ...

  15. Helicon propagation in n-type germanium

    DEFF Research Database (Denmark)

    Særmark, Knud; Pederson, N. Falsig; Lebech, Jens

    1966-01-01

    A report on preliminary experimental results on propagation of helicon waves in n-type Ge is given. Propagation in the (1, 1, 1)- and (1, 0, 0) - directions is considered. The experimental results show that helicon propagation in these directions in n-type Ge may take place under circumstances wh...

  16. 49 CFR 195.111 - Fracture propagation.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Fracture propagation. 195.111 Section 195.111... PIPELINE Design Requirements § 195.111 Fracture propagation. A carbon dioxide pipeline system must be designed to mitigate the effects of fracture propagation. [Amdt. 195-45, 56 FR 26926, June 12, 1991] ...

  17. Evaluation of a Method for Measuring Lateral Obscuration of Coastal Marsh Vegetation in Louisiana

    Science.gov (United States)

    2010-05-01

    important area for wave and surge propagation/attenuation during Hurricane Katrina in 2005. Wave and surge data were also collected in Biloxi Marsh...front of the board. Wind blowing from the side has the effect of swaying a portion of the vegetation so that the backboard is no longer behind it...Laboratory and numerical studies of wave damping by emergent and near-emergent wetland vegetation. In preparation, Coastal Engineering. Cooper, N. J

  18. THE VEGETABLES MARKET IN ROMANIA

    Directory of Open Access Journals (Sweden)

    Livia DAVID

    2012-01-01

    Full Text Available Romania, due to its favourable climatic conditions, is a country with a long tradition in growing vegetables. The importance of growing vegetables is demonstrated both by area cultivated with vegetables and by the large number of individual producers. In this context, the current study comprises, on the one hand, the evolution of vegetable crops specific indicators, and, on the other hand, the evolution of foreign trade. As for the actual production of vegetables in Romania, it cannot provide the requisites for domestic consumption and for this reason we resort to imports. The imports of vegetables and unprocessed products have a negative influence on the trade balance. The producers, processors and distributors of vegetables and vegetable products are faced with a series of problems that have a negative influence on their economic and financial results. Among these problems, the most important ones are generated by: the use of nonperforming traditional technologies that contributed to lower productions, as compared to the productions obtained by EU vegetable farmers; the difficulty in marketing the vegetables within an optimum time interval because vegetable farmers are not members of associations that have a viable marketing programme, which would ensure an adequate and efficient vegetables distribution; the use of nonperforming seeds in order to obtain vegetables. In conclusion, it is imperative to support vegetable farming in order to provide the requisites for consumption and in order to increase the producers’ revenues in the rural space. This can be achieved by accessing structural funds.

  19. Sustainable use and conservation of Vitex doniana Sweet: unlocking the propagation ability using stem cuttings

    Directory of Open Access Journals (Sweden)

    Enoch Gbenato Achigan Dako

    2014-06-01

    Full Text Available One of the major constraints for domesticating widely used wild tree resources by local communities is the lack of adequate propagation techniques. In the case of Vitex doniana, seed propagation has usually been reported difficult and vegetative regeneration is rarely explored. To understand how stem cutting size or hormone application affect the regeneration and early growth ability in that species we used two categories of cutting diameter (1cmVitex doniana to reduce the pressure on wild tree population in Benin.

  20. Mass-spectrometry data for Rhizoctonia solani proteins produced during infection of wheat and vegetative growth

    Directory of Open Access Journals (Sweden)

    Jonathan P. Anderson

    2016-09-01

    Full Text Available Rhizoctonia solani is an important root infecting pathogen of a range of food staples worldwide including wheat, rice, maize, soybean, potato, legumes and others. Conventional resistance breeding strategies are hindered by the absence of tractable genetic resistance in any crop host. Understanding the biology and pathogenicity mechanisms of this fungus is important for addressing these disease issues, however, little is known about how R. solani causes disease. The data described in this article is derived from applying mass spectrometry based proteomics to identify soluble, membrane-bound and culture filtrate proteins produced under wheat infection and vegetative growth conditions. Comparisons of the data for sample types in this set will be useful to identify metabolic pathway changes as the fungus switches from saprophytic to a pathogenic lifestyle or pathogenicity related proteins contributing to the ability to cause disease on wheat. The data set is deposited in the PRIDE archive under identifier PRIDE: PXD002806.

  1. Stapled Mesh stomA Reinforcement Technique (SMART) in the prevention of parastomal hernia: a single-centre experience.

    Science.gov (United States)

    Ng, Z Q; Tan, P; Theophilus, M

    2017-06-01

    Parastomal hernia remains a frequent complication following creation of an abdominal stoma. Previous interests have centred around the exploration of methods to repair; however, prophylactic mesh placement has demonstrated its efficacy in reduction of parastomal hernia. The aim of this retrospective analysis was to evaluate the outcomes of Stapled Mesh stomA Reinforcement Technique (SMART) in terms of parastomal hernia occurrence rate and mesh-related complications. All patients operated with an abdominal perineal resection or Hartmann's procedure with SMART from November 2013 to March 2016 were included. Patient demographics, operative details and stoma-related symptoms were collected. Patients were examined clinically by the medical team and also reviewed independently by a specialist stoma care nurse for signs of stoma-related complications. As part of oncological follow-up, CT scans were available for review for evidence of parastomal herniation. 14 patients (mean age 76 years) were included in the analysis. All the SMART cases were successfully completed with no intraoperative or immediate post-operative complications. No cases of mesh-related complications such as infection, immediate stomal prolapse, stenosis, retraction, stomal obstruction, mesh erosion or fistulation were observed. No mesh removal was required. There were two cases of parastomal hernia detected on CT scan. Both cases have remained asymptomatic no intervention was required at this stage. Median follow-up was 24 months. Our medium-term experience has demonstrated the efficacy of SMART in the reduction of parastomal hernia occurrence. With appropriate learning curve, parastomal hernia can be prevented.

  2. Fabrication of biopolymer-based staple electrospun fibres for nanocomposite applications by particle-assisted low temperature ultrasonication.

    Science.gov (United States)

    Mulky, Elias; Yazgan, Gökçe; Maniura-Weber, Katharina; Luginbuehl, Reto; Fortunato, Giuseppino; Bühlmann-Popa, Ana-Maria

    2014-12-01

    We demonstrate the fabrication of staple polymer-based fibres by the ultrasound-assisted processing of electrospun meshes. Bioabsorbable Poly-L-Lactic Acid (PLLA) was electrospun from organic solvent mixtures, yielding continuous fibres with diameters in the range of 244±78 nm. Subsequently, the obtained fibres were sonicated at low temperatures in the presence of nanoparticles in order to obtain fibres with small aspect ratios. The influence of the dispersion medium, the sonication process parameters (temperature and time) and the dimensions of the particles used on the respective length distribution of the obtained nanofibres was investigated. Hexane was identified as an optimal dispersion medium for the system studied in this work. When a cooling bath temperature of 0°C was used, a slight increase in the obtained fibres' average length and distribution was observed as compared to cooling at -80°C (54±43 μm vs 44±31 μm). Moreover, in the presence of hydroxyapatite and hydrophilic and hydrophobic TiO2 nanoparticles in the dispersion medium longer fibres were obtained (44±31 μm, 63±47 μm, and 51±52 μm). Finally, the application of the obtained PLLA-fibre-hydroxyapatite (HA) nanoparticle precursors for the fabrication of a fibre-reinforced Brushite-based cement with high compressive strength is shown. This method of obtaining nanoscaled fibre-reinforced materials opens up a wide range of perspectives for the fabrication of composites for tissue engineering applications. Copyright © 2014 Elsevier B.V. All rights reserved.

  3. The Vegetables Turned:

    DEFF Research Database (Denmark)

    Carter, Dale

    2009-01-01

    lyricist Van Dyke Parks, the incongruous, semantically complex figure of the vegetable came to illuminate aspects of psychedelic consciousness and - part by design, part by accident - the link between LSD and Anglo-American popular music. It threw light, too, on the scope and limits of changes...

  4. Dioxins in Dutch vegetables

    NARCIS (Netherlands)

    Hoogerbrugge R; Bakker MI; Hijman WC; Boer AC den; Hartog RS den; Baumann RA; LAC; LVM; SIR

    2004-01-01

    The exposure to dioxins (including polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls) occurs predominantly via the intake of food. The main contribution to the total intake originates from the consumption of animal fat. Nevertheless, vegetables were estimated

  5. Light propagation in linear optical media

    CERN Document Server

    Gillen, Glen D; Guha, Shekhar

    2013-01-01

    Light Propagation in Linear Optical Media describes light propagation in linear media by expanding on diffraction theories beyond what is available in classic optics books. In one volume, this book combines the treatment of light propagation through various media, interfaces, and apertures using scalar and vector diffraction theories. After covering the fundamentals of light and physical optics, the authors discuss light traveling within an anisotropic crystal and present mathematical models for light propagation across planar boundaries between different media. They describe the propagation o

  6. Tropospheric radiowave propagation beyond the horizon

    CERN Document Server

    Du Castel, François

    1966-01-01

    Tropospheric Radiowave Propagation Beyond the Horizon deals with developments concerning the tropospheric propagation of ultra-short radio waves beyond the horizon, with emphasis on the relationship between the theoretical and the experimental. Topics covered include the general conditions of propagation in the troposphere; general characteristics of propagation beyond the horizon; and attenuation in propagation. This volume is comprised of six chapters and begins with a brief historical look at the various stages that have brought the technique of transhorizon links to its state of developmen

  7. Spatial Vegetation Data for Acadia National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — The U.S. Geological Survey (USGS) Upper Midwest Environmental Sciences Center (UMESC) has produced the Vegetation Spatial Database Coverage (vegetation map) for the...

  8. Propagation phenomena in real world networks

    CERN Document Server

    Fay, Damien; Gabryś, Bogdan

    2015-01-01

    Propagation, which looks at spreading in complex networks, can be seen from many viewpoints; it is undesirable, or desirable, controllable, the mechanisms generating that propagation can be the topic of interest, but in the end all depends on the setting. This book covers leading research on a wide spectrum of propagation phenomenon and the techniques currently used in its modelling, prediction, analysis and control. Fourteen papers range over topics including epidemic models, models for trust inference, coverage strategies for networks, vehicle flow propagation, bio-inspired routing algorithms, P2P botnet attacks and defences, fault propagation in gene-cellular networks, malware propagation for mobile networks, information propagation in crisis situations, financial contagion in interbank networks, and finally how to maximize the spread of influence in social networks. The compendium will be of interest to researchers, those working in social networking, communications and finance and is aimed at providin...

  9. Radio wave propagation and parabolic equation modeling

    CERN Document Server

    Apaydin, Gokhan

    2018-01-01

    A thorough understanding of electromagnetic wave propagation is fundamental to the development of sophisticated communication and detection technologies. The powerful numerical methods described in this book represent a major step forward in our ability to accurately model electromagnetic wave propagation in order to establish and maintain reliable communication links, to detect targets in radar systems, and to maintain robust mobile phone and broadcasting networks. The first new book on guided wave propagation modeling and simulation to appear in nearly two decades, Radio Wave Propagation and Parabolic Equation Modeling addresses the fundamentals of electromagnetic wave propagation generally, with a specific focus on radio wave propagation through various media. The authors explore an array of new applications, and detail various v rtual electromagnetic tools for solving several frequent electromagnetic propagation problems. All of the methods described are presented within the context of real-world scenari...

  10. Wave Propagation in Bimodular Geomaterials

    Science.gov (United States)

    Kuznetsova, Maria; Pasternak, Elena; Dyskin, Arcady; Pelinovsky, Efim

    2016-04-01

    Observations and laboratory experiments show that fragmented or layered geomaterials have the mechanical response dependent on the sign of the load. The most adequate model accounting for this effect is the theory of bimodular (bilinear) elasticity - a hyperelastic model with different elastic moduli for tension and compression. For most of geo- and structural materials (cohesionless soils, rocks, concrete, etc.) the difference between elastic moduli is such that their modulus in compression is considerably higher than that in tension. This feature has a profound effect on oscillations [1]; however, its effect on wave propagation has not been comprehensively investigated. It is believed that incorporation of bilinear elastic constitutive equations within theory of wave dynamics will bring a deeper insight to the study of mechanical behaviour of many geomaterials. The aim of this paper is to construct a mathematical model and develop analytical methods and numerical algorithms for analysing wave propagation in bimodular materials. Geophysical and exploration applications and applications in structural engineering are envisaged. The FEM modelling of wave propagation in a 1D semi-infinite bimodular material has been performed with the use of Marlow potential [2]. In the case of the initial load expressed by a harmonic pulse loading strong dependence on the pulse sign is observed: when tension is applied before compression, the phenomenon of disappearance of negative (compressive) strains takes place. References 1. Dyskin, A., Pasternak, E., & Pelinovsky, E. (2012). Periodic motions and resonances of impact oscillators. Journal of Sound and Vibration, 331(12), 2856-2873. 2. Marlow, R. S. (2008). A Second-Invariant Extension of the Marlow Model: Representing Tension and Compression Data Exactly. In ABAQUS Users' Conference.

  11. Wave propagation and group velocity

    CERN Document Server

    Brillouin, Léon

    1960-01-01

    Wave Propagation and Group Velocity contains papers on group velocity which were published during the First World War and are missing in many libraries. It introduces three different definitions of velocities: the group velocity of Lord Rayleigh, the signal velocity of Sommerfeld, and the velocity of energy transfer, which yields the rate of energy flow through a continuous wave and is strongly related to the characteristic impedance. These three velocities are identical for nonabsorbing media, but they differ considerably in an absorption band. Some examples are discussed in the last chapter

  12. Ultrasound propagation measurements and applications

    Science.gov (United States)

    Lynnworth, L. C.; Papadakis, E. P.; Fowler, K. A.

    1977-01-01

    This paper reviews three systems designed for accurately measuring the propagation of ultrasonic pulses. The three systems are presented in order of velocity-measuring precision: + or - 100 ns, + or - 1 ns, + or - 0.2 ns. Also included is a brief discussion of phase and group velocities, with reference to dispersive, highly attenuating materials. Measurement of attenuation by pulse-echo buffer rod techniques is described briefly. These techniques and instruments have been used to measure sound velocity and attenuation in a variety of materials and shapes, over a wide temperature range.

  13. Information propagation on modular networks

    Science.gov (United States)

    Huang, Liang; Park, Kwangho; Lai, Ying-Cheng

    2006-03-01

    Networks with a community (or modular) structure underlie many social and biological phenomena. In such a network individuals tend to form sparsely linked local communities, each having dense internal connections. We investigate the dynamics of information propagation on modular networks by using a three-state epidemic model with a unit spreading rate (i.e., the probability for a susceptible individual to be “infected” with the information is one). We find a surprising, resonancelike phenomenon: the information lifetime on the network can be maximized by the number of modules. The result can be useful for optimizing or controlling information spread on social or biological networks.

  14. Continuous propagation of microalgae. III.

    Science.gov (United States)

    Hanson, D. T.; Fredrickson, A. G.; Tsuchiya, H. M.

    1971-01-01

    Data are presented which give the specific photosynthetic rate and the specific utilization rates of urea and carbon dioxide as functions of specific growth rate for Chlorella. A mathematical model expresses a set of mass balance relations between biotic and environmental materials. Criteria of validity are used to test this model. Predictive procedures are complemented by a particular model of microbial growth. Methods are demonstrated for predicting substrate utilization rates, production rates of extracellular metabolites, growth limiting conditions, and photosynthetic quotients from propagator variables.

  15. Self-Averaging Expectation Propagation

    DEFF Research Database (Denmark)

    Cakmak, Burak; Opper, Manfred; Fleury, Bernard Henri

    We investigate the problem of approximate inference using Expectation Propagation (EP) for large systems under some statistical assumptions. Our approach tries to overcome the numerical bottleneck of EP caused by the inversion of large matrices. Assuming that the measurement matrices...... are realizations of specific types of random matrix ensembles – called invariant ensembles – the EP cavity variances have an asymptotic self-averaging property. They can be pre-computed using specific generating functions which do not require matrix inversions. We demonstrate the performance of our approach...

  16. Rg propagation: Scatter versus Attenuation

    Science.gov (United States)

    Cleveland, M.; Phillips, W. S.; MacCarthy, J.

    2016-12-01

    At near local distances, the Rg seismic phase is often the largest seismic arrival for shallow sources. While Rg is classically defined for the period range of 8-12 s, we use the term generically to refer to short-period observations of Rayleigh waves from shallow sources [e.g. Langston, 1987; Bonner and Russell, 2013]. There is significant interest in using Rg as a basis for seismic discrimination and magnitude (e.g. Bonner and Russell, 2013). However, the propagation of this phase is poorly understood. At Nevada National Security Site, while Rg is well observed near the source, it quickly disappears at greater distances. This observation raises the fundamental question of how much of the Rg energy is simply attenuating versus scattering into other seismic phases. Understanding this is critical to interpreting not only the observed Rg seismic energy, but also the possible enrichment of other seismic phases resulting from Rg scattering. In this study, we use waveform data from the Bighorn Arch Seismic Experiment (BASE) and Source Physics Experiment (SPE) to investigate Rg propagation, looking to identify how much energy from the phase attenuates with distance and how much scatters into other seismic phases.

  17. Quantum propagation across cosmological singularities

    Science.gov (United States)

    Gielen, Steffen; Turok, Neil

    2017-05-01

    The initial singularity is the most troubling feature of the standard cosmology, which quantum effects are hoped to resolve. In this paper, we study quantum cosmology with conformal (Weyl) invariant matter. We show that it is natural to extend the scale factor to negative values, allowing a large, collapsing universe to evolve across a quantum "bounce" into an expanding universe like ours. We compute the Feynman propagator for Friedmann-Robertson-Walker backgrounds exactly, identifying curious pathologies in the case of curved (open or closed) universes. We then include anisotropies, fixing the operator ordering of the quantum Hamiltonian by imposing covariance under field redefinitions and again finding exact solutions. We show how complex classical solutions allow one to circumvent the singularity while maintaining the validity of the semiclassical approximation. The simplest isotropic universes sit on a critical boundary, beyond which there is qualitatively different behavior, with potential for instability. Additional scalars improve the theory's stability. Finally, we study the semiclassical propagation of inhomogeneous perturbations about the flat, isotropic case, at linear and nonlinear order, showing that, at least at this level, there is no particle production across the bounce. These results form the basis for a promising new approach to quantum cosmology and the resolution of the big bang singularity.

  18. Propagation of Chusquea tessellata (Munro culms at different naphthaleneacetic acid concentrations and in different substrates

    Directory of Open Access Journals (Sweden)

    Jennyfer Insuasty-Torres

    2011-12-01

    Full Text Available Chusquea tessellata is native specie of Colombian wet páramos. Despite the ecological importance of this ecosystem, production activities have altered the structure of the C. tessellata patches. The aim of this study was to evaluate vegetative propagation from sections of culm stimulating their rooting, to have a lot of material for transplantation and with high survival. We tested 56 treatments with three combined factors: phytohormone NAA concentration, type of substrate and type of culm section. After three months we assessed the frequency and number of roots and vegetative shoots. The results suggest that the frequency and quantity of roots and shoots are affected mainly by the type of culm section, the best results is the basal sections, because these sections of culm have the morphological characteristics that allow successful propagation. Shoot production is also affected by interactions between other factors, substrate and NAA concentration

  19. Asexual propagation in the coral reef macroalga Halimeda (Chlorophyta, Bryopsidales) : production, dispersal and attachment of small fragments

    NARCIS (Netherlands)

    Walters, LJ; Coyer, JA; Hunter, CL; Beach, KS; Vroom, PS

    2002-01-01

    Siphonous, green macroalgae of the genus Halimeda are ubiquitous and ecologically important in tropical and subtropical marine environments. It has been hypothesized that the abundance of Halimeda on coral reefs is in part due to the ability of this genus to propagate asexually via vegetative

  20. Propagation Of Dense Plasma Jets

    Science.gov (United States)

    Turchi, Peter J.; Davis, John F.

    1988-05-01

    A variety of schemes have been proposed over the last two decades for delivering lethal amounts of energy and/or momentum to targets such as missiles and high speed aircraft. Techniques have ranged from high energy lasers and high voltage charged-particle accelerators to less exotic but still challenging devices such as electromagnetic railguns. One class of technology involves the use of high speed plasmas. The primary attraction of such technology is the possibility of utilizing relatively compact accelerators and electrical power systems that could allow highly mobile and agile operation from rocket or aircraft platforms, or in special ordnance. Three years ago, R & D Associates examined the possibility of plasma propagation for military applications and concluded that the only viable approach consisted of long dense plasma jets, contained in radial equilibrium by the atmosphere, while propagating at speeds of about 10 km/s. Without atmospheric confinement the plasma density would diminish too rapidly for adequate range and lethality. Propagation of atmospherically-confined jets at speeds much greater than 10 km/s required significant increases in power levels and/or operating altitudes to achieve useful ranges. The present research effort has been developing the experimental conditions necessary to achieve reasonable comparison with theoretical predictions for plasma jet propagation in the atmosphere. Time-resolved measurements have been made of high speed argon plasma jets penetrating a helium background (simulating xenon jets propagating into air). Basic radial confinement of the jet has been observed by photography and spectroscopy and structures in the flow field resemble those predicted by numerical calculations. Results from our successful initial experiments have been used to design improved diagnostic procedures and arcjet source characteristics for further experiments. In experiments with a modified arcjet source, radial confinement of the jet is again

  1. Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips

    Science.gov (United States)

    2012-01-01

    Purpose Metallic skin closure staples and vessel ligation clips should be tested at 3-Tesla to characterize MRI issues in order to ensure patient safety. Therefore, metallic surgical implants were assessed at 3-Tesla for magnetic field interactions, MRI-related heating, and artifacts. Methods A skin closure staple (Visistat Skin Stapler, staple, Polytetrafluoroethylene, PTFE, coated 316L/316LVM stainless steel; Teleflex Medical, Durham, NC) and a vessel ligation clip (Hemoclip Traditional, stainless steel; Teleflex Medical, Durham, NC) that represented the largest metallic sizes made from materials with the highest magnetic susceptibilities (i.e., based on material information) among 61 other surgical implants (52 metallic implants, 9 nonmetallic implants) underwent evaluation for magnetic field interactions, MRI-related heating, and artifacts using standardized techniques. MRI-related heating was assessed by placing each implant in a gelled-saline-filled phantom with MRI performed using a transmit/receive RF body coil at an MR system reported, whole body averaged SAR of 2.9-W/kg for 15-min. Artifacts were characterized using T1-weighted, SE and GRE pulse sequences. Results Each surgical implant showed minor magnetic field interactions (20- and 27-degrees, which is acceptable from a safety consideration). Heating was not substantial (highest temperature change, ≤ 1.6°C). Artifacts may create issues if the area of interest is in the same area or close to the respective surgical implant. Conclusions The results demonstrated that it would be acceptable for patients with these metallic surgical implants to undergo MRI at 3-Tesla or less. Because of the materials and dimensions of the surgical implants that underwent testing, these findings pertain to 61 additional similar implants. PMID:22230200

  2. Assessment of MRI issues at 3-Tesla for metallic surgical implants: findings applied to 61 additional skin closure staples and vessel ligation clips

    Directory of Open Access Journals (Sweden)

    Gill Amreeta

    2012-01-01

    Full Text Available Abstract Purpose Metallic skin closure staples and vessel ligation clips should be tested at 3-Tesla to characterize MRI issues in order to ensure patient safety. Therefore, metallic surgical implants were assessed at 3-Tesla for magnetic field interactions, MRI-related heating, and artifacts. Methods A skin closure staple (Visistat Skin Stapler, staple, Polytetrafluoroethylene, PTFE, coated 316L/316LVM stainless steel; Teleflex Medical, Durham, NC and a vessel ligation clip (Hemoclip Traditional, stainless steel; Teleflex Medical, Durham, NC that represented the largest metallic sizes made from materials with the highest magnetic susceptibilities (i.e., based on material information among 61 other surgical implants (52 metallic implants, 9 nonmetallic implants underwent evaluation for magnetic field interactions, MRI-related heating, and artifacts using standardized techniques. MRI-related heating was assessed by placing each implant in a gelled-saline-filled phantom with MRI performed using a transmit/receive RF body coil at an MR system reported, whole body averaged SAR of 2.9-W/kg for 15-min. Artifacts were characterized using T1-weighted, SE and GRE pulse sequences. Results Each surgical implant showed minor magnetic field interactions (20- and 27-degrees, which is acceptable from a safety consideration. Heating was not substantial (highest temperature change, ≤ 1.6°C. Artifacts may create issues if the area of interest is in the same area or close to the respective surgical implant. Conclusions The results demonstrated that it would be acceptable for patients with these metallic surgical implants to undergo MRI at 3-Tesla or less. Because of the materials and dimensions of the surgical implants that underwent testing, these findings pertain to 61 additional similar implants.

  3. Response of cassava genotypes to different micropropagation media

    Science.gov (United States)

    Cassava is one of the most important staple foods in the human diet in the tropics, where it ranks fourth as a source of energy, after rice, sugar cane and maize. Since it is a vegetative propagated crop, the use of in vitro propagation is very important to preserve the germplasm free of pest and di...

  4. Treatment of Zenker's Diverticulum With Endoscopic Stapled Esophago-divertisculostomy (ESD): Analysis of Long-term Outcome.

    Science.gov (United States)

    Mazza, Michele; Bergamini, Alberto N; Parise, Paolo; Cossu, Andrea; Adamenko, Olga; Elmore, Ugo; Rosati, Riccardo

    2017-09-14

    Endoscopic Zenker diverticulum (ZD) treatment has become quite common because of the low complication rates, reduced procedure time, and shorter hospital stay. Many endoscopic treatments are available including the endoscopic stapled esophago-diverticulostomy (ESD). Many data regarding ESD are available on the short-term outcomes, but few on the long-term ones. From March 1998 to July 2016, 126 patients with ZD were candidate for ESD. Since 2009, 2 stay sutures were routinely positioned at the lateral edges of the septum using Medtronic Endostitch 10 mm suturing device. Demographic and perioperative data, symptoms, and surgical outcomes were recorded. Long-term ESD results were analyzed. An extra-analysis on the surgical outcome was performed comparing patients treated with or without stay sutures. In total, 117 patients successfully underwent ESD. The mean age was 69.9 years with a male predominance. Intraoperative complications occurred in 6.8% of cases. Only 2.6% of the patients reported postoperative complications. For the long-term analysis, we were able to contact 92 patients for a mean period follow-up of 65.3 months. At 6-month outpatient visit 77.68% of patients were completely asymptomatic. In total, 22.3% of the patients needed an extratreatment due to incomplete section of the septum, reaching a success rate of 95.5%. The long-term resolution rate remained high (91.3%). The use of stay sutures did not statistically influence the operative time (22.8 vs. 26.7 min, P=0.070), nor intraoperative and postoperative complication rate, but a statistically significant higher complete resolution rate of symptoms with a single session of ESD was observed respect those treated without (87.3% vs. 65.3%, respectively). ESD is a safe and effective treatment of ZD and it can control symptoms even in a long-term follow-up. In our experience, the use of stay sutures placed with Endostitch increases short and long-term results reducing the need for further treatments.

  5. Reconstruction of the esophagojejunostomy by double stapling method using EEA™ OrVil™ in laparoscopic total gastrectomy and proximal gastrectomy

    Directory of Open Access Journals (Sweden)

    Yano Seiji

    2011-05-01

    Full Text Available Abstract Here we report the method of anastomosis based on double stapling technique (hereinafter, DST using a trans-oral anvil delivery system (EEATM OrVilTM for reconstructing the esophagus and lifted jejunum following laparoscopic total gastrectomy or proximal gastric resection. As a basic technique, laparoscopic total gastrectomy employed Roux-en-Y reconstruction, laparoscopic proximal gastrectomy employed double tract reconstruction, and end-to-side anastomosis was used for the cut-off stump of the esophagus and lifted jejunum. We used EEATM OrVilTM as a device that permitted mechanical purse-string suture similarly to conventional EEA, and endo-Surgitie. After the gastric lymph node dissection, the esophagus was cut off using an automated stapler. EEATM OrVilTM was orally and slowly inserted from the valve tip, and a small hole was created at the tip of the obliquely cut-off stump with scissors to let the valve tip pass through. Yarn was cut to disconnect the anvil from a tube and the anvil head was retained in the esophagus. The end-Surgitie was inserted at the right subcostal margin, and after the looped-shaped thread was wrapped around the esophageal stump opening, assisting Maryland forceps inserted at the left subcostal and left abdomen were used to grasp the left and right esophageal stump. The surgeon inserted anvil grasping forceps into the right abdomen, and after grasping the esophagus with the forceps, tightened the end Surgitie, thereby completing the purse-string suture on the esophageal stump. The main unit of the automated stapler was inserted from the cut-off stump of the lifted jejunum, and a trocar was made to pass through. To prevent dropout of the small intestines from the automated stapler, the automated stapler and the lifted jejunum were fastened with silk thread, the abdomen was again inflated, and the lifted jejunum was led into the abdominal cavity. When it was confirmed that the automated stapler and center rod

  6. Greenhouse gas emissions and reactive nitrogen releases during the life-cycles of staple food production in China and their mitigation potential

    Energy Technology Data Exchange (ETDEWEB)

    Xia, Longlong [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Ti, Chaopu [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Li, Bolun [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xia, Yongqiu [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China); Yan, Xiaoyuan, E-mail: yanxy@issas.ac.cn [State Key Laboratory of Soil and Sustainable Agriculture, Institute of Soil Science, Chinese Academy of Sciences, Nanjing 210008 (China)

    2016-06-15

    Life-cycle analysis of staple food (rice, flour and corn-based fodder) production and assessments of the associated greenhouse gas (GHG) and reactive nitrogen (Nr) releases, from environmental and economic perspectives, help to develop effective mitigation options. However, such evaluations have rarely been executed in China. We evaluated the GHG and Nr releases per kilogram of staple food production (carbon and Nr footprints) and per unit of net economic benefit (CO{sub 2-NEB} and Nr{sub -NEB}), and explored their mitigation potential. Carbon footprints of food production in China were obviously higher than those in some developed countries. There was a high spatial variation in the footprints, primarily attributable to differences in synthetic N use (or CH{sub 4} emissions) per unit of food production. Provincial carbon footprints had a significant linear relationship with Nr footprints, attributed to large contribution of N fertilizer use to both GHG and Nr releases. Synthetic N fertilizer applications and CH{sub 4} emissions dominated the carbon footprints, while NH{sub 3} volatilization and N leaching were the main contributors to the Nr footprints. About 564 (95% uncertainty range: 404–701) Tg CO{sub 2} eq GHG and 10 (7.4–12.4) Tg Nr-N were released every year during 2001–2010 from staple food production. This caused the total damage costs of 325 (70–555) billion ¥, equivalent to nearly 1.44% of the Gross Domestic Product of China. Moreover, the combined damage costs and economic input costs, accounted for 66%-80% of the gross economic benefit generated from food production. A reduction of 92.7 Tg CO{sub 2} eq yr{sup −1} and 2.2 Tg Nr-N yr{sup −1} could be achieved by reducing synthetic N inputs by 20%, increasing grain yields by 5% and implementing off-season application of straw and mid-season drainage practices for rice cultivation. In order to realize these scenarios, an ecological compensation scheme should be established to incentivize

  7. Analysis of vegetation effect on waves using a vertical 2-D RANS model

    Science.gov (United States)

    A vertical two-dimensional (2-D) model has been applied in the simulation of wave propagation through vegetated water bodies. The model is based on an existing model SOLA-VOF which solves the Reynolds-Averaged Navier-Stokes (RANS) equations with the finite difference method on a staggered rectangula...

  8. Propagation engineering in radio links design

    CERN Document Server

    Ghasemi, Abdollah; Ghasemi, Farshid

    2013-01-01

    Propagation Engineering in Radio Link Design covers the basic principles of radiowaves propagation in a practical manner.  This fundamental understanding enables the readers to design radio links efficiently. This book elaborates on new achievements as well as recently developed propagation models.  This is in addition to a comprehensive overview of fundamentals of propagation in various scenarios. It examines theoretical calculations, approaches and applied procedures needed for radio links design. The authors study and analysis of the main propagation phenomena and its mechanisms based on the recommendations of International Telecommunications Union, (ITU). The book has been organized in 9 chapters and examines the role of antennas and passive reflectors in radio services, propagation mechanisms related to radar, satellite, short distance, broadcasting and trans-horizon radio links, with two chapters devoted to radio noise and main  parameters of radio link design. The book presents some 278 illustration...

  9. Radio Channel Modelling Using Stochastic Propagation Graphs

    OpenAIRE

    Pedersen, Troels; Fleury, Bernard Henri

    2007-01-01

    In this contribution the radio channel model proposedin [1] is extended to include multiple transmitters and receivers.The propagation environment is modelled using randomgraphs where vertices of a graph represent scatterers and edgesmodel the wave propagation between scatterers. Furthermore,we develop a closed form analytical expression for the transfermatrix of the propagation graph. It is shown by simulation thatimpulse response and the delay-power spectrum of the graphexhibit exponentiall...

  10. Learning Affinity via Spatial Propagation Networks

    OpenAIRE

    Liu, Sifei; De Mello, Shalini; Gu, Jinwei; Zhong, Guangyu; Yang, Ming-Hsuan; Kautz, Jan

    2017-01-01

    In this paper, we propose spatial propagation networks for learning the affinity matrix for vision tasks. We show that by constructing a row/column linear propagation model, the spatially varying transformation matrix exactly constitutes an affinity matrix that models dense, global pairwise relationships of an image. Specifically, we develop a three-way connection for the linear propagation model, which (a) formulates a sparse transformation matrix, where all elements can be the output from a...

  11. Radio Propagation into Modern Buildings

    DEFF Research Database (Denmark)

    Rodriguez Larrad, Ignacio; Nguyen, Huan Cong; Jørgensen, Niels T.K.

    2014-01-01

    constructions. These materials are used in favor of achieving a proper level of thermal isolation, but it has been noticed that they can impact heavily on radio signal propagation. This paper presents a measurement-based analysis of the outdoor-to-indoor attenuation experienced in several modern constructions...... compared to an old building. The measurements are performed for frequencies from 800 MHz to 18 GHz with the aim of identifying the frequency dependence and the impact of the new materials on not only the cellular frequency bands used today (mainly below 3 GHz), but also the potential future bands (above 3...... GHz). The results show a material dependent and a frequency dependent attenuation, with an average increase of 20-25 dB in modern constructions compared to the old construction, which presents a low and almost constant attenuation below 10 dB. The different measurement results and observations...

  12. Acoustic energy propagation around railways

    Science.gov (United States)

    Cizkova, Petra

    2017-09-01

    The article deals with the issues of acoustic energy propagation around railways. The research subject was noise emission spreading into the surroundings during the passage of trains over a directly travelled steel bridge construction. Noise emissions were measured using direct measurements in the field. The measurements were performed in two measurement profiles. The noise exposures A LAE measured near the steel bridge construction were compared against the noise exposures A LAE captured on an open track. From the difference of these data, the noise level of the steel bridge structure was determined. Part of the research was to evaluate the effect of the reconstruction of the railway track superstructure on the acoustic situation in the given section of the railway track. The article describes the methodology of measurements, including the processing and evaluation of measured data. The article points out the noise levels of the steel bridge construction and assesses changes in the acoustic situation after the reconstruction.

  13. Pulse Propagation on close conductors

    CERN Document Server

    Dieckmann, A

    2001-01-01

    The propagation and reflection of arbitrarily shaped pulses on non-dispersive parallel conductors of finite length with user defined cross section is simulated employing the discretized telegraph equation. The geometry of the system of conductors and the presence of dielectric material determine the capacities and inductances that enter the calculation. The values of these parameters are found using an iterative Laplace equation solving procedure and confirmed for certain calculable geometries including the line charge inside a box. The evolving pulses and the resulting crosstalk can be plotted at any instant and - in the Mathematica notebook version of this report - be looked at in an animation. As an example a differential pair of microstrips as used in the ATLAS vertex detector is analysed.

  14. Propagation handbook for wireless communication system design

    CERN Document Server

    Crane, Robert K

    2003-01-01

    PROPAGATION PHENOMENA AFFECTING WIRELESS SYSTEMS Types of SystemsDesign Criteria Antenna Considerations Propagation Effects Propagation Models Model Verification Statistics and RiskList of Symbols ReferencesPROPAGATION FUNDAMENTALSMaxwell's EquationsPlane Waves Spherical Waves Reflection and Refraction Geometrical OpticsRay TracingScalar Diffraction Theory Geometrical Theory of Diffraction List of Symbols ReferencesABSORPTION Molecular Absorption Absorption on a Slant Path ACTS Statistics List of Symbols ReferencesREFRACTION Ray BendingPath Delay ScintillationList of Symbols ReferencesATTENUAT

  15. Terrestrial propagation of long electromagnetic waves

    CERN Document Server

    Galejs, Janis; Fock, V A

    2013-01-01

    Terrestrial Propagation of Long Electromagnetic Waves deals with the propagation of long electromagnetic waves confined principally to the shell between the earth and the ionosphere, known as the terrestrial waveguide. The discussion is limited to steady-state solutions in a waveguide that is uniform in the direction of propagation. Wave propagation is characterized almost exclusively by mode theory. The mathematics are developed only for sources at the ground surface or within the waveguide, including artificial sources as well as lightning discharges. This volume is comprised of nine chapte

  16. Stochastic and epistemic uncertainty propagation in LCA

    DEFF Research Database (Denmark)

    Clavreul, Julie; Guyonnet, Dominique; Tonini, Davide

    2013-01-01

    When performing uncertainty propagation, most LCA practitioners choose to represent uncertainties by single probability distributions and to propagate them using stochastic methods. However, the selection of single probability distributions appears often arbitrary when faced with scarce information...... manner and apply it to LCA. A case study is used to show the uncertainty propagation performed with the proposed method and compare it to propagation performed using probability and possibility theories alone.Basic knowledge on the probability theory is first recalled, followed by a detailed description...

  17. Aspects of HF radio propagation

    Directory of Open Access Journals (Sweden)

    Stephane Saillant

    2009-06-01

    Full Text Available

    radio systems. From the point of view Working Group 2 of the COST 296 Action, interest lies with effects associated

    with propagation via the ionosphere of signals within the HF band. Several aspects are covered in this paper:

    a The directions of arrival and times of flight of signals received over a path oriented along the trough have

    been examined and several types of propagation effects identified. Of particular note, combining the HF observations

    with satellite measurements has identified the presence of irregularities within the floor of the trough that

    result in propagation displaced from the great circle direction. An understanding of the propagation effects that

    result in deviations of the signal path from the great circle direction are of particular relevance to the operation

    of HF radiolocation systems.

    b Inclusion of the results from the above mentioned measurements into a propagation model of the northerly

    ionosphere (i.e. those regions of the ionosphere located poleward of, and including, the mid-latitude trough

    and the use of this model to predict the coverage expected from transmitters where the signals impinge on the

    northerly ionosphere

  18. In vitro methods for mutation induction in potato ( Solanum ...

    African Journals Online (AJOL)

    Potato (Solanum tuberosum L.) is an important vegetable and staple crop worldwide and mainly propagated vegetatively. Breeding of potato is problematic and therefore induced mutation is an attractive means of improving the crop. In vitro culture systems, and especially the production of microtubers, are ideal for such ...

  19. Phenolation of vegetable oils

    Directory of Open Access Journals (Sweden)

    ZORAN S. PETROVIĆ

    2011-04-01

    Full Text Available Novel bio-based compounds containing phenols suitable for the syn­thesis of polyurethanes were prepared. The direct alkylation of phenols with different vegetable oils in the presence of superacids (HBF4, triflic acid as ca­talysts was studied. The reaction kinetics was followed by monitoring the de­crease of the double bond content (iodine value with time. In order to under­stand the mechanism of the reaction, phenol was alkylated with model com­pounds. The model compounds containing one internal double bond were 9-oc­tadecene and methyl oleate and those with three double bonds were triolein and high oleic safflower oil (82 % oleic acid. It was shown that the best structures for phenol alkylation are fatty acids with only one double bond (oleic acid. Fatty acids with two double bonds (linoleic acid and three double bonds (lino­lenic acid lead to polymerized oils by a Diels–Alder reaction, and to a lesser extent to phenol alkylated products. The reaction product of direct alkylation of phenol with vegetable oils is a complex mixture of phenol alkylated with poly­merized oil (30–60 %, phenyl esters formed by transesterification of phenol with triglyceride ester bonds (<10 % and unreacted oil (30 %. The phenolated vegetable oils are new aromatic–aliphatic bio-based raw materials suitable for the preparation of polyols (by propoxylation, ethoxylation, Mannich reactions for the preparation of polyurethanes, as intermediates for phenolic resins or as bio-based antioxidants.

  20. Noise Propagation and Uncertainty Quantification in Hybrid Multiphysics Models: Initiation and Reaction Propagation in Energetic Materials

    Science.gov (United States)

    2016-05-23

    AFRL-AFOSR-VA-TR-2016-0200 Noise Propagation and Uncertainty Quantification in Hybrid Multiphysics Models Daniel Tartakovsky UNIVERSITY OF CALIFORNIA...2016 Title: Noise Propagation and Uncertainty Quantification in Hybrid Multi-Physics Models Subtitle: Initiation and Reaction Propagation in...and Uncertainty Quantification in Hybrid Multi-Physics Models Task: Initiation and Reaction Propagation in Energetic Materials AFOSR award: FA9550-12-1

  1. Surface plasmon propagation near an index step

    NARCIS (Netherlands)

    Berger, C.E.H.; Berger, Charles E.H.; Kooyman, R.P.H.; Greve, Jan

    1999-01-01

    Propagation effects of surface plasmons on the surface plasmon microscopy (SPM) image of an area around the edge of a cover layer were studied as a function of the wavelength. A phenomenological model that describes these effects of surface plasmon propagation on the observed reflectance is

  2. Content Propagation in Online Social Networks

    NARCIS (Netherlands)

    Blenn, N.

    2014-01-01

    This thesis presents methods and techniques to analyze content propagation within online social networks (OSNs) using a graph theoretical approach. Important factors and different techniques to analyze and describe content propagation, starting from the smallest entity in a network, representing a

  3. Topology optimization of wave-propagation problems

    DEFF Research Database (Denmark)

    Jensen, Jakob Søndergaard; Sigmund, Ole

    2006-01-01

    Topology optimization is demonstrated as a useful tool for systematic design of wave-propagation problems. We illustrate the applicability of the method for optical, acoustic and elastic devices and structures.......Topology optimization is demonstrated as a useful tool for systematic design of wave-propagation problems. We illustrate the applicability of the method for optical, acoustic and elastic devices and structures....

  4. Propagation testing multi-cell batteries.

    Energy Technology Data Exchange (ETDEWEB)

    Orendorff, Christopher J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Lamb, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Steele, Leigh Anna Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Spangler, Scott Wilmer [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-10-01

    Propagation of single point or single cell failures in multi-cell batteries is a significant concern as batteries increase in scale for a variety of civilian and military applications. This report describes the procedure for testing failure propagation along with some representative test results to highlight the potential outcomes for different battery types and designs.

  5. Wave Beam Propagation Through Density Fluctuations

    NARCIS (Netherlands)

    Balakin, A. A.; Bertelli, N.; Westerhof, E.

    2011-01-01

    Perturbations induced by edge density fluctuations on electron cyclotron wave beams propagating in fusion plasmas are studied by means of a quasi-optical code. The effects of such fluctuations are illustrated here by showing the beam propagation in the case of single harmonic perturbations to the

  6. Wave propagation in thermoelastic saturated porous medium

    Indian Academy of Sciences (India)

    playing a crucial role in non-destructive evaluation. (NDE) of composite materials and structures. The studies of ... diffusion type heat equation used in this study predicted infinite speed for propagation of ther- mal signals. ..... the NDE problems involving wave propagation in thermoelastic porous solids. When supported with.

  7. Managing Data From Signal-Propagation Experiments

    Science.gov (United States)

    Kantak, Anil V.

    1992-01-01

    Report dicusses system for management of data from Pilot Field Experiment (PiFEx) program, which consists of series of experiments on propagation of signals from transmitter at one fixed location to transponder on tower at another fixed location and from transponder to mobile receiver in van. Purpose of experiments to simulate signal-propagation conditions of land-mobile/satellite communication system.

  8. Bolus propagation in pig ureter in vitro

    NARCIS (Netherlands)

    R. van Mastrigt (Ron); E.A. Tauecchio

    1984-01-01

    textabstractPig ureters were made to propagate injected fluid boluses by electrical stimulation in vitro. The propagation velocity was determined from EMG measurements made at several points along the ureter. It was found that this velocity varied both along the ureter and as a function of time, and

  9. Telegrapher's equation with variable propagation speeds

    OpenAIRE

    Masoliver, Jaume, 1951-; Weiss, George H. (George Herbert), 1930-

    1994-01-01

    All derivations of the one-dimensional telegraphers equation, based on the persistent random walk model, assume a constant speed of signal propagation. We generalize here the model to allow for a variable propagation speed and study several limiting cases in detail. We also show the connections of this model with anomalous diffusion behavior and with inertial dichotomous processes.

  10. A vector model for error propagation

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L.; Geraldo, L.P.

    1989-03-01

    A simple vector model for error propagation, which is entirely equivalent to the conventional statistical approach, is discussed. It offers considerable insight into the nature of error propagation while, at the same time, readily demonstrating the significance of uncertainty correlations. This model is well suited to the analysis of error for sets of neutron-induced reaction cross sections. 7 refs., 1 fig.

  11. Radio Channel Modelling Using Stochastic Propagation Graphs

    DEFF Research Database (Denmark)

    Pedersen, Troels; Fleury, Bernard Henri

    2007-01-01

    In this contribution the radio channel model proposed in [1] is extended to include multiple transmitters and receivers. The propagation environment is modelled using random graphs where vertices of a graph represent scatterers and edges model the wave propagation between scatterers. Furthermore...

  12. Diagnostics for the ATA beam propagation experiments

    Energy Technology Data Exchange (ETDEWEB)

    Fessenden, T.J.; Atchison, W.L.; Barletta, W.A.

    1981-11-01

    This report contains a discussion of the diagnostics required for the beam propagation experiment to be done with the ATA accelerator. Included are a list of the diagnostics needed; a description of the ATA experimental environment; the status of beam diagnostics available at Livermore including recent developments, and a prioritized list of accelerator and propagation diagnostics under consideration or in various stages of development.

  13. Lightninig Induced Sferics Correlated with Whistler Propagation

    Science.gov (United States)

    Compston, A. J.; Said, R.; Linscott, I.; Inan, U. S.; Parrot, M.

    2011-12-01

    Lightning discharges generate broadband electromagnetic pulses, known as sferics, that efficiently propagate through the Earth-ionosphere waveguide. Some sferic energy can escape the Earth-ionosphere waveguide and propagate in a whistler mode, enabled by Earth's magnetic field, through the ionosphere. In this presentation, we correlate lightning discharge location and time data from the National Lightning Detection Network (NLDN) in the United States with burst mode electric field measurements from the DEMETER spacecraft to quantify and model whistler propagation through the ionosphere. Using the International Reference Ionosphere (IRI) model for electron density and the International Geomagnetic Reference Field (IGRF) model for magnetic field, we compare measured propagation with the Full Wave Method (FWM) finite element numerical code developed by N. G. Lehtinen and U. S. Inan. While a few studies have analyzed whistler propagation through the ionosphere using spacecraft measurements, spacecraft data have yet to be compared with the FWM as we have done here.

  14. Random matrix theory for underwater sound propagation

    Science.gov (United States)

    Hegewisch, K. C.; Tomsovic, S.

    2012-02-01

    Ocean acoustic propagation can be formulated as a wave guide with a weakly random medium generating multiple scattering. Twenty years ago, this was recognized as a quantum chaos problem, and yet random matrix theory, one pillar of quantum or wave chaos studies, has never been introduced into the subject. The modes of the wave guide provide a representation for the propagation, which in the parabolic approximation is unitary. Scattering induced by the ocean's internal waves leads to a power-law random banded unitary matrix ensemble for long-range deep-ocean acoustic propagation. The ensemble has similarities, but differs, from those introduced for studying the Anderson metal-insulator transition. The resulting long-range propagation ensemble statistics agree well with those of full wave propagation using the parabolic equation.

  15. Propagation of SLF/ELF electromagnetic waves

    CERN Document Server

    Pan, Weiyan

    2014-01-01

    This book deals with the SLF/ELF wave propagation, an important branch of electromagnetic theory. The SLF/ELF wave propagation theory is well applied in earthquake electromagnetic radiation, submarine communication, thunderstorm detection, and geophysical prospecting and diagnostics. The propagation of SLF/ELF electromagnetic waves is introduced in various media like the earth-ionospheric waveguide, ionospheric plasma, sea water, earth, and the boundary between two different media or the stratified media. Applications in the earthquake electromagnetic radiation and the submarine communications are also addressed. This book is intended for scientists and engineers in the fields of radio propagation and EM theory and applications. Prof. Pan is a professor at China Research Institute of Radiowave Propagation in Qingdao (China). Dr. Li is a professor at Zhejiang University in Hangzhou (China).

  16. Premixed flame propagation in vertical tubes

    CERN Document Server

    Kazakov, Kirill A

    2015-01-01

    Analytical treatment of premixed flame propagation in vertical tubes with smooth walls is given. Using the on-shell flame description, equations describing quasi-steady flame with a small but finite front thickness are obtained and solved numerically. It is found that near the limits of inflammability, solutions describing upward flame propagation come in pairs having close propagation speeds, and that the effect of gravity is to reverse the burnt gas velocity profile generated by the flame. On the basis of these results, a theory of partial flame propagation driven by the gravitational field is developed. A complete explanation is given of the intricate observed behavior of limit flames, including dependence of the inflammability range on the size of the combustion domain, the large distances of partial flame propagation, and the progression of flame extinction. The role of the finite front-thickness effects is discussed in detail. Also, various mechanisms governing flame acceleration in smooth tubes are ide...

  17. Pupils relationship of consuming vegetables

    OpenAIRE

    Meglič, Maja

    2017-01-01

    In a time of adolescence, consuming vitamins and minerals (elements), water, and roughage is very important. Vegetables should be on the menu every day in a week. In a time of adolescence, consumption of vegetables is below recommendations. It is recommended to consume 400 to 650 g of vegetables. It depends on numerous factors whether youth and children eat healthy food or not. Such factors are culture, social environment (family, friends, classmates, school), exposure (accessibility, inacces...

  18. Topographic effects on infrasound propagation.

    Science.gov (United States)

    McKenna, Mihan H; Gibson, Robert G; Walker, Bob E; McKenna, Jason; Winslow, Nathan W; Kofford, Aaron S

    2012-01-01

    Infrasound data were collected using portable arrays in a region of variable terrain elevation to quantify the effects of topography on observed signal amplitude and waveform features at distances less than 25 km from partially contained explosive sources during the Frozen Rock Experiment (FRE) in 2006. Observed infrasound signals varied in amplitude and waveform complexity, indicating propagation effects that are due in part to repeated local maxima and minima in the topography on the scale of the dominant wavelengths of the observed data. Numerical simulations using an empirically derived pressure source function combining published FRE accelerometer data and historical data from Project ESSEX, a time-domain parabolic equation model that accounted for local terrain elevation through terrain-masking, and local meteorological atmospheric profiles were able to explain some but not all of the observed signal features. Specifically, the simulations matched the timing of the observed infrasound signals but underestimated the waveform amplitude observed behind terrain features, suggesting complex scattering and absorption of energy associated with variable topography influences infrasonic energy more than previously observed. © 2012 Acoustical Society of America.

  19. Relishes: The new pickled vegetables

    Directory of Open Access Journals (Sweden)

    Tepić Aleksandra N.

    2006-01-01

    Full Text Available There have been an increasing interest of consumers for a ide variety of pickled vegetable products worldwide. Regarding the regional vegetable supplies and relatively poor assortment of ready-to-use products, the need to broaden the offer of domestic pickled vegetables at the market came out. In this work recipes for different vegetables, spices and condiments were developed. The best graded samples were analyzed for their main chemical composition (dry matter, proteins, oils and fats, total acidity, total sugars, sucrose, starch, cellulose, pH and energy- values.

  20. Crestridge Vegetation Map [ds211

    Data.gov (United States)

    California Department of Resources — This layer represents vegetation communities in the Department of Fish and Game's Crestridge Ecological Reserve. The County of San Diego, the Conservation Biology...

  1. Influence of leaf retention on cutting propagation of Lavandula dentata L.

    Directory of Open Access Journals (Sweden)

    Claudine Maria de Bona

    2010-08-01

    Full Text Available Vegetative propagation of lavender offers several advantages over sexual propagation, among them crop homogeneity and yield of higher quality essential oil. However, Lavandula species have been propagated mostly by seeds and are said to be recalcitrant to rooting when propagated by cuttings. During cutting propagation, one of the important variables that influence the rooting capacity of cuttings is the leaf retention. The objective of this work was to evaluate the influence of leaf retention on rooting of L. dentata cuttings. Apical cuttings of L. dentata of 10 cm in length, keeping approximately 1/3, 1/2 or 2/3 of their leaves were planted in commercial substrate Plantmax HT® under intermittent mist. After two months, averages of root number, length of the longest root, root fresh and dry weights, and the survival percentage were evaluated. Root length and fresh weight were statistically greater with 2/3 of leaf retention and when fewer leaves were kept on the cuttings, lower means of root dry weight was observed. Under the conditions applied in this study, greater leaf retention was better for rooting of L. dentata cuttings.

  2. THE BIOLOGY OF THE PROPAGATION OF SPECIES SCHISANDRA CHINENSIS (TURCZ. BAILL.

    Directory of Open Access Journals (Sweden)

    CIORCHINĂ NINA

    2011-12-01

    Full Text Available The paper presents aspects regarding the possibilities for the propagation of species Schisandra chinensis (Turz. Baill, as well as its reaction in the pedo-climatic conditions of the Republic of Moldova. Situated in the Lianarium of the Botanical Garden (Institute AŞM since 1975, Schisandra chinensis (Turcz. Baill. grows, develops and fructifies abundantly every year. It is propagated vegetatively and generatively with some difficulty. In the case of generative propagation, in order to obtain a high germination percentage, the seeds are stratified in three phases, at different temperatures and are sown in spring. Germination percentages of 80-90% were obtained. Schisandra chinensis is also propagated by greenwood cuttings, semi-hardwood or hardwood cuttings, by layering or by division. The best results were obtained by using semi-hardwood and hardwood cuttings taken in summer, in June-July, from younger plants. The potential for in vitro propagation of this species was also tested. The explants consisting of apical meristems inoculated on MS medium + 0.5 mg/l BAP evolved the best.

  3. Heavy metals in green vegetables and soils from vegetable gardens ...

    African Journals Online (AJOL)

    Edible portions of five varieties of green vegetables, namely amaranth, chinese cabbage, cowpea leaves, leafy cabbage and pumpkin leaves, collected from several areas in Dar es Salaam, were analyzed for lead, cadmium, chromium, zinc, nickel and copper. Except for zinc, the levels of heavy metals in the vegetables ...

  4. Fruits and vegetables dehydration

    Science.gov (United States)

    de Ita, A.; Flores, G.; Franco, F.

    2015-01-01

    Dehydration diagrams were determined by means of Differential Thermal Analysis, DTA, and Thermo Gravimetric Analysis, TGA, curves of several simultaneous fruits and vegetables, all under the same conditions. The greater mass loss is associated with water containing in the structure of the investigated materials at low temperature. In poblano chile water is lost in a single step. The banana shows a very sharply two stages, while jicama can be observed although with a little difficulty three stages. The major mass loss occurs in the poblano chile and the lower in banana. The velocity and temperature of dehydration vary within a small range for most materials investigated, except for banana and cactus how are very different.

  5. Pole solutions for flame front propagation

    CERN Document Server

    Kupervasser, Oleg

    2015-01-01

    This book deals with solving mathematically the unsteady flame propagation equations. New original mathematical methods for solving complex non-linear equations and investigating their properties are presented. Pole solutions for flame front propagation are developed. Premixed flames and filtration combustion have remarkable properties: the complex nonlinear integro-differential equations for these problems have exact analytical solutions described by the motion of poles in a complex plane. Instead of complex equations, a finite set of ordinary differential equations is applied. These solutions help to investigate analytically and numerically properties of the flame front propagation equations.

  6. Self-Replication of Localized Vegetation Patches in Scarce Environments

    Science.gov (United States)

    Bordeu, Ignacio; Clerc, Marcel G.; Couteron, Piere; Lefever, René; Tlidi, Mustapha

    2016-09-01

    Desertification due to climate change and increasing drought periods is a worldwide problem for both ecology and economy. Our ability to understand how vegetation manages to survive and propagate through arid and semiarid ecosystems may be useful in the development of future strategies to prevent desertification, preserve flora—and fauna within—or even make use of scarce resources soils. In this paper, we study a robust phenomena observed in semi-arid ecosystems, by which localized vegetation patches split in a process called self-replication. Localized patches of vegetation are visible in nature at various spatial scales. Even though they have been described in literature, their growth mechanisms remain largely unexplored. Here, we develop an innovative statistical analysis based on real field observations to show that patches may exhibit deformation and splitting. This growth mechanism is opposite to the desertification since it allows to repopulate territories devoid of vegetation. We investigate these aspects by characterizing quantitatively, with a simple mathematical model, a new class of instabilities that lead to the self-replication phenomenon observed.

  7. Toxicología Vegetal

    OpenAIRE

    García Fernández, Antonio Juan

    2010-01-01

    Presentaciones de clase de los temas de Toxicología Vegetal de la licenciatura de Veterinaria de la Universidad de Murcia del curso 2011/12. Presentaciones de Toxicología Vegetal de la asignatura de Toxicología de la Licenciatura de Veterinaria del curso 2011/12

  8. Genomic stability of Palmer amaranth plants derived by macro-vegetative propagation

    Science.gov (United States)

    Q-PCR (quantitative polymerase chain reaction) and random amplified polymorphic DNA (RAPD) were utilized to investigate genetic stability of Palmer amaranth cloned plants over 10 generations. Q-PCR analysis of DNA from parent Palmer amaranth plants was repeated and confidence levels for determining ...

  9. Transfer of knowledge about flowering and vegetative propagation from model species to bulbous plants

    NARCIS (Netherlands)

    Leeggangers, H.A.C.F.; Moreno Pachón, N.M.; Gude, H.; Immink, G.H.

    2013-01-01

    The extensive characterization of plant genes and genome sequences summed to the continuous development of biotechnology tools, has played a major role in understanding biological processes in plant model species. The challenge for the near future is to generate methods and pipelines for an

  10. Vegetative propagation of malay apple [Syzygium malaccense (L.) Merr. & LM Perry

    OpenAIRE

    de Almeida, Eduardo Jose [UNESP; Torrecillas Scaloppi, Eliana Mayra [UNESP; de Jesus, Natanael; Benassi, Antonio Carlos; Devos Ganga, Rita Maria; Geraldo Martins, Antonio Baldo [UNESP

    2010-01-01

    O jambeiro vermelho [Syzygium malaccense (L.) Merr. & L.M. Perry] se apresenta como opção ao fruticultor por apresentar frutos atrativos e bem aceitos pelo consumidor. A dificuldade de cultivo dessa espécie reside no fato de que a planta possui um porte demasiadamente alto e longo período juvenil quando propagada por semente, com isso, é desejável sua multiplicação vegetativa visando a antecipar o período produtivo e diminuir seu porte. Foi estudada a possibilidade de clonagem dessa espécie p...

  11. Vegetative Propagation of Five Local Cultivars of Malay Apple (Syzygium malaccense spp.) in Ternate Island

    OpenAIRE

    A.R. Ryadin; S.L. Ranamukaarachchi; P. Soni; R. P. Shrestha

    2014-01-01

    The characteristics of cuttings of five cultivars of local malay apple (Syzygium malaccense L.) was studied in Ternate Island, Indonesia. Hardwood cuttings of malay apple were planted in two combinations of media and hormone treatments. During 5 months experiment, can be found that hardwood cutting of malay apple with top soil+ sand and NAA 1000 ppm had the best performance in producing shoots and roots for cuttings of malay apple in a short period. Although, each of these cultivars has diffe...

  12. Propagation and Establishment of Native Plants for Vegetative Restoration of Aquatic Ecosystems

    Science.gov (United States)

    2013-06-01

    ideal for most species. Overly sandy substrates are unsuitable as a culture medium because they are generally infertile and because added nutrients...Substrates require heat sterilization if nuisance species occur or have occurred in the past in the water body from which substrates are collected... sterilize sediments to avoid or reduce this problem. If weeds do begin to establish, removing unwanted plants requires hand weeding; and while this

  13. Flowering and vegetative propagation of pyrethrum (Chrysanthemum cinerariaefolium Vis.) in vivo and in vitro

    NARCIS (Netherlands)

    Roest, S.

    1976-01-01

    The influence of climatic conditions was investigated on flowering behaviour of pyrethrum ( Chrysanthemum cinerariaefolium Vis.). At low temperatures high numbers of plants initiated high numbers of flower heads. Both the development of the initiated flower heads and the

  14. Regeneration and vegetative propagation of Sphagnum palustre as factor of population stability

    Directory of Open Access Journals (Sweden)

    Dygna Sobotka

    2015-01-01

    Full Text Available The stability of the Sphagnum palustre populations on the meadows of the Kampinos National Park situated north-west of Warsaw was investigated in the period 1971-1974. Laboratory cultures were also started to establish the regenerative ability of various gametophyte parts of Sphagnum: the main stem, branches, leaves and spore germination. The green stems and apical branches of the plants showed the highest regeneration ability. Brown stems and white branches developed less intensively. Leaves showed no tendency to develop into new plants. Gametophores were found to form quicker and more effectively by way of regeneration than from spores. In natural conditions more intensive growth of branchings (new shoots from the apical and green parts of Sphagnum was also observed, whereas the brown parts did not exhibit this ability.

  15. Towards industrial production of tree varieties through somatic embryogenesis and other vegetative propagation technologies

    DEFF Research Database (Denmark)

    Find, Jens Iver

    2016-01-01

    The main focus of the research on somatic embryogenesis in nordmanns fir has until recently been on improving the basic protocols in each step of the process. However, with recent developments, one single set of methods has shown to be effective for production of plants from more than 500 differe...

  16. Vegetative propagation of Hyptis leucocephala Mart. ex Benth. and Hyptis platanifolia Mart. ex Benth

    OpenAIRE

    DE OLIVEIRA, L M; Nepomuceno, C.F; Freitas,N.P; Pereira,D.M.S; Silva, G.C; Lucchese, A.M

    2011-01-01

    O gênero Hyptis (Lamiaceae) apresenta metabolismo especial de notável variabilidade, possuindo predominância de óleos essenciais, que têm muito valor junto a diversas comunidades que utilizam essas plantas pelas propriedades terapêuticas. Diversos estudos com esse gênero têm demonstrado que os óleos essenciais apresentam propriedades antimicrobiana, antifúngica, citotóxica, antiinflamatória, anti-HIV e inseticida, entretanto, poucos são os estudos voltados para a exploração sustentável dessas...

  17. Benchmark cases for outdoor sound propagation models

    NARCIS (Netherlands)

    Attenborough, K.; Taherzadeh, S.; Bass, H.E.; Di, X.; Raspet, R.; Becker, G.R.; Gdesen, A.; Chrestman, A.; Daigle, G.A.; Esp‚rance, A. L; Gabillet, Y.; Gilbert, K.E.; Li, Y.L.; White, J.; Naz, P.; Noble, J.M.; Hoof, H.A.J.M. van

    1995-01-01

    The computational tools available for prediction of sound propagation through the atmosphere have increased dramatically during the past decade. The numerical techniques include analytical solutions for selected index of refraction profiles, ray trace techniques which include interaction with a

  18. Superluminal propagation: Light cone and Minkowski spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Mugnai, D. [' Nello Carrara' Institute of Applied Physics, CNR Florence Research Area, Via Madonna del Piano 10, 50019 Sesto Fiorentino (Italy)]. E-mail: d.mugnai@ifac.cnr.it

    2007-05-14

    Superluminal behavior has been extensively studied in recent years, especially with regard to the topic of superluminality in the propagation of a signal. Particular interest has been devoted to Bessel-X waves propagation, since some experimental results showed that these waves have both phase and group velocities greater that light velocity c. However, because of the lack of an exact definition of signal velocity, no definite answer about the signal propagation (or velocity of information) has been found. The present Letter is a short note that deals in a general way with this vexed question. By analyzing the field of existence of the Bessel X-pulse in pseudo-Euclidean spacetime, it is possible to give a general description of the propagation, and to overcome the specific question related to a definition of signal velocity.

  19. Coupled seismic and electromagnetic wave propagation

    NARCIS (Netherlands)

    Schakel, M.D.

    2011-01-01

    Coupled seismic and electromagnetic wave propagation is studied theoretically and experimentally. This coupling arises because of the electrochemical double layer, which exists along the solid-grain/fluid-electrolyte boundaries of porous media. Within the double layer, charge is redistributed,

  20. Probabilistic infrasound propagation using realistic atmospheric perturbations

    NARCIS (Netherlands)

    Smets, P.S.M.; Evers, L.G.; Näsholm, S.P.; Gibbons, S.J.

    2015-01-01

    This study demonstrates probabilistic infrasound propagation modeling using realistic perturbations. The ensembles of perturbed analyses, provided by the European Centre for Medium-Range Weather Forecasts (ECMWF), include error variances of both model and assimilated observations. Ensemble spread

  1. A solid state lightning propagation speed sensor

    Science.gov (United States)

    Mach, Douglas M.; Rust, W. David

    1989-01-01

    A device to measure the propagation speeds of cloud-to-ground lightning has been developed. The lightning propagation speed (LPS) device consists of eight solid state silicon photodetectors mounted behind precision horizontal slits in the focal plane of a 50-mm lens on a 35-mm camera. Although the LPS device produces results similar to those obtained from a streaking camera, the LPS device has the advantages of smaller size, lower cost, mobile use, and easier data collection and analysis. The maximum accuracy for the LPS is 0.2 microsec, compared with about 0.8 microsecs for the streaking camera. It is found that the return stroke propagation speed for triggered lightning is different than that for natural lightning if measurements are taken over channel segments less than 500 m. It is suggested that there are no significant differences between the propagation speeds of positive and negative flashes. Also, differences between natural and triggered dart leaders are discussed.

  2. Pulse Wave Propagation in the Arterial Tree

    Science.gov (United States)

    van de Vosse, Frans N.; Stergiopulos, Nikos

    2011-01-01

    The beating heart creates blood pressure and flow pulsations that propagate as waves through the arterial tree that are reflected at transitions in arterial geometry and elasticity. Waves carry information about the matter in which they propagate. Therefore, modeling of arterial wave propagation extends our knowledge about the functioning of the cardiovascular system and provides a means to diagnose disorders and predict the outcome of medical interventions. In this review we focus on the physical and mathematical modeling of pulse wave propagation, based on general fluid dynamical principles. In addition we present potential applications in cardiovascular research and clinical practice. Models of short- and long-term adaptation of the arterial system and methods that deal with uncertainties in personalized model parameters and boundary conditions are briefly discussed, as they are believed to be major topics for further study and will boost the significance of arterial pulse wave modeling even more.

  3. Entropy Generation Analysis of Wildfire Propagation

    Directory of Open Access Journals (Sweden)

    Elisa Guelpa

    2017-08-01

    Full Text Available Entropy generation is commonly applied to describe the evolution of irreversible processes, such as heat transfer and turbulence. These are both dominating phenomena in fire propagation. In this paper, entropy generation analysis is applied to a grassland fire event, with the aim of finding possible links between entropy generation and propagation directions. The ultimate goal of such analysis consists in helping one to overcome possible limitations of the models usually applied to the prediction of wildfire propagation. These models are based on the application of the superimposition of the effects due to wind and slope, which has proven to fail in various cases. The analysis presented here shows that entropy generation allows a detailed analysis of the landscape propagation of a fire and can be thus applied to its quantitative description.

  4. PROPAGATION OF CYLINDRICAL WAVES IN POROELASTIC MEDIA

    Directory of Open Access Journals (Sweden)

    Vorona Yu.V.

    2014-12-01

    Full Text Available The paper investigates the harmonic axisymmetric wave propagation in poroelastic media. The computational formulas for the study of displacements and stresses that occur during vibrations in a wide frequency range are proposed.

  5. Propagation of inflationary shocks in Costa Rica

    Directory of Open Access Journals (Sweden)

    Adolfo Rodríguez Vargas

    2013-06-01

    Full Text Available Abstract We present an estimation of propagation effects of inflationary shocks to groups and specific products of the CPI using a SVAR framework.  We found significant propagation effects for 6 out of the 12 groups of the CPI, which together account for 72% of the basket.  These groups include those related to food, home apparel and housekeeping services and transportation. The estimations suggest that shocks to Food and Non-Alcoholic Beverages and to fuels are passed through entirely to the rest of the CPI basket. The majority of the most important propagation effects occur between 6 and 10 months after the shocks.  This includes propagation effects stemming from shocks to fuels, products with regulated price, tradables and the IPPI index.

  6. Propagating semantic information in biochemical network models

    Directory of Open Access Journals (Sweden)

    Schulz Marvin

    2012-01-01

    Full Text Available Abstract Background To enable automatic searches, alignments, and model combination, the elements of systems biology models need to be compared and matched across models. Elements can be identified by machine-readable biological annotations, but assigning such annotations and matching non-annotated elements is tedious work and calls for automation. Results A new method called "semantic propagation" allows the comparison of model elements based not only on their own annotations, but also on annotations of surrounding elements in the network. One may either propagate feature vectors, describing the annotations of individual elements, or quantitative similarities between elements from different models. Based on semantic propagation, we align partially annotated models and find annotations for non-annotated model elements. Conclusions Semantic propagation and model alignment are included in the open-source library semanticSBML, available on sourceforge. Online services for model alignment and for annotation prediction can be used at http://www.semanticsbml.org.

  7. Modeling Propagation of Gas Path Damage

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper describes how damage propagation can be tracked and modeled for a range of fault modes in some modules of commercial high bypass aircraft engines. To that...

  8. In vitro propagation of Paphiopedilum orchids.

    Science.gov (United States)

    Zeng, Songjun; Huang, Weichang; Wu, Kunlin; Zhang, Jianxia; da Silva, Jaime A Teixeira; Duan, Jun

    2016-01-01

    Paphiopedilum is one of the most popular and rare orchid genera. Members of the genus are sold and exhibited as pot plants and cut flowers. Wild populations of Paphiopedilum are under the threat of extinction due to over-collection and loss of suitable habitats. A reduction in their commercial value through large-scale propagation in vitro is an option to reduce pressure from illegal collection, to attempt to meet commercial needs and to re-establish threatened species back into the wild. Although they are commercially propagated via asymbiotic seed germination, Paphiopedilum are considered to be difficult to propagate in vitro, especially by plant regeneration from tissue culture. This review aims to cover the most important aspects and to provide an up-to-date research progress on in vitro propagation of Paphiopedilum and to emphasize the importance of further improving tissue culture protocols for ex vitro-derived explants.

  9. Spatial Vegetation Data for Effigy Mounds National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — The vegetation spatial database coverage (vegetation map) is a product of the Effigy Mounds National Monument Vegetation Mapping Project, USGS-NPS Vegetation Mapping...

  10. Use of bioabsorbable staple reinforcement material in side-to-side anastomoses: Suture line reinforcement of the weak point of the anastomosis.

    Science.gov (United States)

    Kimura, Masahiro; Terashita, Yukio

    2016-03-01

    Few studies have been designed regarding optimal reinforcement of the crotch of a side-to-side anastomosis. The purpose of this study was to clarify the weak point of the side-to-side anastomosis and to evaluate the effect of bioabsorbable reinforcement material. Fresh pig small bowel was used for all experiments. A side-to-side anastomosis was performed using a linear stapler, and the burst pressure of the anastomosis was measured. Three separate experiments were done. In experiment 1, the weak point and the burst pressure of that point were defined. In experiment 2, the burst pressure of the side of the anastomosis was measured. In experiment 3, we evaluated the effect of Neoveil(®) to strengthen the weak point of the anastomosis. The weak point of the side-to side anastomosis was the crotch and the burst pressure was 39.8 ± 5.7 mmHg. The burst pressure of the side of the anastomosis was 109.9 ± 7.9 mmHg. This was significantly higher than the burst pressure of the crotch (P = 0.008). The burst pressure of the crotch in the group with Neoveil(®) was 83.3 ± 14.9 mmHg. This pressure was significantly higher than the group with no Neoveil(®) reinforcement (P = 0.001). These findings suggest that the use of Neoveil(®) as a buttressing material is associated with reinforced staple lines and increased crotch burst pressures compared to non-buttressed staple lines. Neoveil(®) was found to perform comparably to clinically available buttress materials in this ex vivo model. Reinforcement of the weak point of the side-to-side anastomosis with Neoveil(®)may lead to fewer anastomotic leaks.

  11. Four-dimensional measurement of the displacement of metal clips or postoperative surgical staples during 320-multislice computed tomography scanning of gastric cancer

    Directory of Open Access Journals (Sweden)

    Yamashita Hideomi

    2012-08-01

    Full Text Available Abstract Purpose To investigate the respiratory motion of metal clips or surgical staples placed in the gastric wall for planning of radiation therapy in gastric cancer patients. Methods This study examined 15 metal markers in the gastric walls of 12 patients with gastric cancer treated with external-beam photon RT. Motion assessment was analyzed in 41 respiratory phases covering 20 s acquired with computed tomography (CT in the RT position using 320-multislice CT. The intra-fraction displacement was assessed in the cranio-caudal (CC, antero-posterior (AP, and right-left (RL directions. Results Motion in the CC direction showed a very strong correlation (R2 > 0.7 with the respiratory curve in all 15 markers. The mean (+/− SD intra-fractional gastric motion (maximum range of displacement was 12.5 (+/− 3.4 mm in the CC, 8.3 (+/− 2.2 mm in the AP, and 5.5 (+/− 3.0 mm in the RL direction. No significant differences in magnitude of motion were detected in the following: a among the upper (n = 6, middle (n = 4, and lower (n = 5 stomach regions; b between metal clips (n = 5 and surgical staples (n = 10; and c between full (n = 9 and empty (n = 6 stomachs. Conclusions Motion in primary gastric tumor was evaluated with 320-multislice CT. According to this study, the 95th percentile values from the cumulative distributions of the RL, AP, and CC direction were 6.3 mm, 9.0 mm, and 13.6 mm, respectively.

  12. Canada Basin Acoustic Propagation Experiment (CANAPE)

    Science.gov (United States)

    2015-09-30

    fundamental limits to the use of acoustic methods and signal processing imposed by ice and ocean processes in the new Arctic. The hope is that these...1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Canada Basin Acoustic Propagation Experiment (CANAPE...ocean structure. Changes in sea ice and the water column affect both acoustic propagation and ambient noise. This implies that what was learned

  13. Optical Propagation in Anisotropic Metamaterials (Postprint)

    Science.gov (United States)

    2017-02-22

    OPTICAL PROPAGATION ANALYSIS USING BERREMAN MATRIX METHOD Figure 2 shows a TM polarized plane wave propagating in the − plane from free space...respectively, inside the anisotropic metamaterial. TM represents the component of the wave vector in the metamaterial for TM polarization and...or alternatively, refractive index and characteristic impedance. These properties depend not only on the wavelength and polarization but also the

  14. Nonlinear effects in infrasound propagation simulations

    OpenAIRE

    GAINVILLE, Olaf; Marsden, Olivier

    2012-01-01

    International audience; In the framework of the Comprehensive Nuclear-Test-Ban Treaty, long range propagation of infrasound through the atmosphere is investigated using numerical models. The study problem is a cylindrical blast in an inhomogeneous atmosphere. Vertical profiles of temperature, wind and density obtained during the Misty Picture High explosive experiment conducted in May 1987 are used. The propagation is modeled using two codes. First, the full 2-D Navier-Stokes equations are so...

  15. Radio propagation measurement and channel modelling

    CERN Document Server

    Salous, Sana

    2013-01-01

    While there are numerous books describing modern wireless communication systems that contain overviews of radio propagation and radio channel modelling, there are none that contain detailed information on the design, implementation and calibration of radio channel measurement equipment, the planning of experiments and the in depth analysis of measured data. The book would begin with an explanation of the fundamentals of radio wave propagation and progress through a series of topics, including the measurement of radio channel characteristics, radio channel sounders, measurement strategies

  16. Error Propagation in a System Model

    Science.gov (United States)

    Schloegel, Kirk (Inventor); Bhatt, Devesh (Inventor); Oglesby, David V. (Inventor); Madl, Gabor (Inventor)

    2015-01-01

    Embodiments of the present subject matter can enable the analysis of signal value errors for system models. In an example, signal value errors can be propagated through the functional blocks of a system model to analyze possible effects as the signal value errors impact incident functional blocks. This propagation of the errors can be applicable to many models of computation including avionics models, synchronous data flow, and Kahn process networks.

  17. Modeling of nonlinear propagation in fiber tapers

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper

    2012-01-01

    A full-vectorial nonlinear propagation equation for short pulses in tapered optical fibers is developed. Specific emphasis is placed on the importance of the field normalization convention for the structure of the equations, and the interpretation of the resulting field amplitudes. Different...... numerical schemes for interpolation of fiber parameters along the taper are discussed and tested in numerical simulations on soliton propagation and generation of continuum radiation in short photonic-crystal fiber tapers....

  18. Propagation of sound waves in ducts

    DEFF Research Database (Denmark)

    Jacobsen, Finn

    2000-01-01

    Plane wave propagation in ducts with rigid walls, radiation from ducts, classical four-pole theory for composite duct systems, and three-dimentional waves in wave guides of various cross-sectional shape are described.......Plane wave propagation in ducts with rigid walls, radiation from ducts, classical four-pole theory for composite duct systems, and three-dimentional waves in wave guides of various cross-sectional shape are described....

  19. Rumor Propagation Model: An Equilibrium Study

    OpenAIRE

    Piqueira, José Roberto C.

    2010-01-01

    Compartmental epidemiological models have been developed since the 1920s and successfully applied to study the propagation of infectious diseases. Besides, due to their structure, in the 1960s an interesting version of these models was developed to clarify some aspects of rumor propagation, considering that spreading an infectious disease or disseminating information is analogous phenomena. Here, in an analogy with the SIR (Susceptible-Infected-Removed) epidemiological model, the ISS (Ignoran...

  20. The Gluon Propagator without lattice Gribov copies

    CERN Document Server

    Alexandrou, C; Follana, E; Forcrand, Ph. de

    2001-01-01

    We study the gluon propagator on the lattice using the Laplacian gauge which is free of lattice Gribov copies. We compare our results with those obtained in the Landau gauge on the lattice, as well as with various approximate solutions of the Dyson Schwinger equations. We find a finite value $\\sim (250 \\rm{MeV})^{-2}$ for the zero-momentum propagator, and a pole mass $\\sim 640 \\pm 110$ MeV.

  1. Spark channel propagation in a microbubble liquid

    Energy Technology Data Exchange (ETDEWEB)

    Panov, V. A.; Vasilyak, L. M., E-mail: vasilyak@ihed.ras.ru; Vetchinin, S. P.; Pecherkin, V. Ya.; Son, E. E. [Russian Academy of Sciences, Joint Institute for High Temperatures (Russian Federation)

    2016-11-15

    Experimental study on the development of the spark channel from the anode needle under pulsed electrical breakdown of isopropyl alcohol solution in water with air microbubbles has been performed. The presence of the microbubbles increases the velocity of the spark channel propagation and increases the current in the discharge gap circuit. The observed rate of spark channel propagation in microbubble liquid ranges from 4 to 12 m/s, indicating the thermal mechanism of the spark channel development in a microbubble liquid.

  2. Affinity Propagation Clustering Using Path Based Similarity

    OpenAIRE

    Yuan Jiang; Yuliang Liao; Guoxian Yu

    2016-01-01

    Clustering is a fundamental task in data mining. Affinity propagation clustering (APC) is an effective and efficient clustering technique that has been applied in various domains. APC iteratively propagates information between affinity samples, updates the responsibility matrix and availability matrix, and employs these matrices to choose cluster centers (or exemplars) of respective clusters. However, since it mainly uses negative Euclidean distance between exemplars and samples as the simila...

  3. Observations of Obliquely Propagating Electron Bernstein Waves

    DEFF Research Database (Denmark)

    Armstrong, R. J.; Juul Rasmussen, Jens; Stenzel, R. L.

    1981-01-01

    Plane electron Bernstein waves propagating obliquely to the magnetic field are investigated. The waves are excited by a plane grid antenna in a large volume magnetoplasma. The observations compare favorably with the predictions of the linear dispersion relation.......Plane electron Bernstein waves propagating obliquely to the magnetic field are investigated. The waves are excited by a plane grid antenna in a large volume magnetoplasma. The observations compare favorably with the predictions of the linear dispersion relation....

  4. Molecular dynamics simulation of propagating cracks

    Science.gov (United States)

    Mullins, M.

    1982-01-01

    Steady state crack propagation is investigated numerically using a model consisting of 236 free atoms in two (010) planes of bcc alpha iron. The continuum region is modeled using the finite element method with 175 nodes and 288 elements. The model shows clear (010) plane fracture to the edge of the discrete region at moderate loads. Analysis of the results obtained indicates that models of this type can provide realistic simulation of steady state crack propagation.

  5. Single Tree Vegetation Depth Estimation Tool for Satellite Services Link Design

    Directory of Open Access Journals (Sweden)

    Z. Hasirci

    2016-04-01

    Full Text Available Attenuation caused by tree shadowing is an important factor for describing the propagation channel of satellite services. Thus, vegetation effects should be determined by experimental studies or empirical formulations. In this study, tree types in the Black Sea Region of Turkey are classified based on their geometrical shapes into four groups such as conic, ellipsoid, spherical and hemispherical. The variations of the vegetation depth according to different tree shapes are calculated with ray tracing method. It is showed that different geometrical shapes have different vegetation depths even if they have same foliage volume for different elevation angles. The proposed method is validated with the related literature in terms of average single tree attenuation. On the other hand, due to decrease system requirements (speed, memory usage etc. of ray tracing method, an artificial neural network is proposed as an alternative. A graphical user interface is created for the above processes in MATLAB environment named vegetation depth estimation tool (VdET.

  6. Rumor propagation on networks with community structure

    Science.gov (United States)

    Zhang, Ruixia; Li, Deyu

    2017-10-01

    In this paper, based on growth and preferential attachment mechanism, we give a network generation model aiming at generating networks with community structure. There are three characteristics for the networks generated by the generation model. The first is that the community sizes can be nonuniform. The second is that there are bridge hubs in each community. The third is that the strength of community structure is adjustable. Next, we investigate rumor propagation behavior on the generated networks by performing Monte Carlo simulations to reveal the influence of bridge hubs, nonuniformity of community sizes and the strength of community structure on the dynamic behavior of the rumor propagation. We find that bridge hubs have outstanding performance in propagation speed and propagation size, and larger modularity can reduce rumor propagation. Furthermore, when the decay rate of rumor spreading β is large, the final density of the stiflers is larger if the rumor originates in larger community. Additionally, when on networks with different strengths of community structure, rumor propagation exhibits greater difference in the density of stiflers and in the peak prevalence if the decay rate β is larger.

  7. Soluble Aβ aggregates can inhibit prion propagation.

    Science.gov (United States)

    Sarell, Claire J; Quarterman, Emma; Yip, Daniel C-M; Terry, Cassandra; Nicoll, Andrew J; Wadsworth, Jonathan D F; Farrow, Mark A; Walsh, Dominic M; Collinge, John

    2017-11-01

    Mammalian prions cause lethal neurodegenerative diseases such as Creutzfeldt-Jakob disease (CJD) and consist of multi-chain assemblies of misfolded cellular prion protein (PrPC). Ligands that bind to PrPC can inhibit prion propagation and neurotoxicity. Extensive prior work established that certain soluble assemblies of the Alzheimer's disease (AD)-associated amyloid β-protein (Aβ) can tightly bind to PrPC, and that this interaction may be relevant to their toxicity in AD. Here, we investigated whether such soluble Aβ assemblies might, conversely, have an inhibitory effect on prion propagation. Using cellular models of prion infection and propagation and distinct Aβ preparations, we found that the form of Aβ assemblies which most avidly bound to PrP in vitro also inhibited prion infection and propagation. By contrast, forms of Aβ which exhibit little or no binding to PrP were unable to attenuate prion propagation. These data suggest that soluble aggregates of Aβ can compete with prions for binding to PrPC and emphasize the bidirectional nature of the interplay between Aβ and PrPC in Alzheimer's and prion diseases. Such inhibitory effects of Aβ on prion propagation may contribute to the apparent fall-off in the incidence of sporadic CJD at advanced age where cerebral Aβ deposition is common. © 2017 The Authors.

  8. Indicators: Lakeshore Habitat/Riparian Vegetative Cover

    Science.gov (United States)

    Riparian and lakeshore vegetative cover consist of the vegetation corridor alongside streams, rivers, and lakes. Vegetative cover refers to overhanging or submerged tree limbs, shrubs, and other plants growing along the shore of the waterbody.

  9. Vegetation composition and structure influences bird species ...

    African Journals Online (AJOL)

    Vegetation composition and structure influences bird species community assemblages in the highland agricultural landscape of Nyandarua, Kenya. ... Bird species diversity increased with increasing density of woody plant species and vegetation structural heterogeneity. Two gradients of increasing vegetation structural ...

  10. Recovery times of riparian vegetation

    Science.gov (United States)

    Vesipa, Riccardo; Camporeale, Carlo; Ridolfi, Luca

    2016-04-01

    Riparian vegetation is a key element in a number of processes that determine the eco-geomorphological features of the river landscape. Depending on the river water stage fluctuations, vegetation biomass randomly switches between growth and decay phases, and its biomass exhibits relevant temporal variations. A full understanding of vegetation dynamics is therefore only possible if the hydrological stochastic forcing is considered. In this vein, we focus on the recovery time of vegetation, namely the typical time taken by vegetation to recover a health state starting from a low biomass value (induced, for instance, by an intense flood). The minimalistic stochastic modeling approach is used for describing vegetation dynamics (i.e., the noise-driven alternation of growth and decay phases). The recovery time of biomass is then evaluated according to the theory of the mean first passage time in systems driven by dichotomous noise. The effect of the main hydrological and biological parameters on the vegetation recovery was studied, and the dynamics along the riparian transect was described in details. The effect of climate change and human interventions (e.g., river damming) was also investigated. We found that: (i) the oscillations of the river stage delay the recovery process (up to one order of magnitude, with respect to undisturbed conditions); (ii) hydrological/biological alterations (due to climate change, damming, exotic species invasion) modify the timescales of the recovery. The result provided can be a useful tool for the management of the river. They open the way to the estimation of: (i) the recovery time of vegetation after devastating floods, clear cutting or fires and; (ii) the timescale of the vegetation response to hydrological and biological alterations.

  11. Spatial Vegetation Data for Voyageurs National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — The vegetation spatial database coverage is of Voyageurs National Park and extended environs, covering 156,886 hectares (387,674 acres). Voyageurs National Park...

  12. Spatial Vegetation Data for Zion National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This metadata is for the vegetation and land-use geo-spatial database for Zion National Park and surrounding areas. The project is authorized as part of the USGS/NPS...

  13. Spatial Vegetation Data for Badlands National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This metadata is for all coverages associated with the vegetation land cover and land use geospatial database for Badlands National Park and surrounding areas. The...

  14. Spatial Vegetation Data for Colorado National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — The vegetation units on this map were determined through a series of image processing steps including unsupervised classification, ecological modeling and...

  15. Spatial Vegetation Data for Wupatki National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This metadata is for the vegetation and land-use geo-spatial database for Wupatki National Monument and surrounding areas. The project is authorized as part of the...

  16. Spatial Vegetation Data for Dinosaur National Monument Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — This polygon feature class represents vegetation communities mapped at Dinosaur National Monument. The polygons were delineated following guidelines set by the...

  17. Spatial Vegetation Data for Glacier National Park Vegetation Mapping Project

    Data.gov (United States)

    National Park Service, Department of the Interior — The geographic information system (GIS) format spatial data set of vegetation for Glacier National Park (GNP) was created by the U.S. Geological Survey...

  18. Wave Propagation inside Random Media

    Science.gov (United States)

    Cheng, Xiaojun

    =-x/l where l is the transport mean free path. The result does not depend on the sample length, which is counterintuitive yet remarkably simple. More supprisingly, the linear fall-off of energy profile holds for totally disordered random 1D layered samples in simulations where the LDOS is uniform as well as for single mode random waveguide experiments and 1D nearly periodic samples where the LDOS is suppressed in the middle of the sample. The generalization of the transmission matrix to the interior of quasi-1D random samples, which is defined as the field matrix, and its eigenvalues statistics are also discussed. The maximum energy deposition at a location is not the intensity of the first transmission eigenchannel but the eigenvalue of the first energy density eigenchannels at that cross section, which can be much greater than the average value. The contrast, which is the ratio of the intensity at the focused point to the background intensity, in optimal focusing is determined by the participation number of the energy density eigenvalues and its inverse gives the variance of the energy density at that cross section in a single configuration. We have also studied topological states in photonic structures. We have demonstrated robust propagation of electromagnetic waves along reconfigurable pathways within a topological photonic metacrystal. Since the wave is confined within the domain wall, which is the boundary between two distinct topological insulating systems, we can freely steer the wave by reconstructing the photonic structure. Other topics, such as speckle pattern evolutions and the effects of boundary conditions on the statistics of transmission eigenvalues and energy profiles are also discussed.

  19. Vegetation - McKenzie Preserve [ds703

    Data.gov (United States)

    California Department of Resources — The California Native Plant Society (CNPS) Vegetation Program produced a vegetation map and classification for approximately 11,600 acres primarily within Millerton...

  20. Locally propagated activation immediately after internal defibrillation.

    Science.gov (United States)

    Chattipakorn, N; KenKnight, B H; Rogers, J M; Walker, R G; Walcott, G P; Rollins, D L; Smith, W M; Ideker, R E

    1998-04-14

    Electrical mapping studies indicate an interval of 40 to 100 ms between a defibrillation shock and the earliest activation that propagates globally over the ventricles (globally propagated activation, GPA). This study determined whether activation occurs during this interval but propagates only locally before being blocked (locally propagated activation, LPA). In five anesthetized pigs, the heart was exposed and a 504-electrode sock with 4-mm interelectrode spacing was pulled over the ventricles. Ten biphasic shocks of a strength near the defibrillation threshold (DFT) were delivered via intracardiac catheter electrodes, and epicardial activation sequences were mapped before and after attempted defibrillation. Local activation was defined as dV/dt < or =-0.5 V/s. Postshock activation times and wave-front interaction patterns were determined with an animated display of dV/dt at each electrode in a computer representation of the ventricular epicardium. LPAs were observed after 40 of the 50 shocks. A total of 173 LPA regions were observed, each of which involved 2+/-2 (mean+/-SD) electrodes. LPAs were observed after both successful and failed shocks but occurred earlier (P<.0001) after failed (35+/-8 ms) than successful (41+/-16 ms) shocks, although the times at which the GPA appeared were not significantly different. On reaching the LPA region, the GPA front either propagated through it (n=135) or was blocked (n=38). The time from the onset of the LPA until the GPA front propagated to reach the LPA region was shorter (P<.01) when the GPA front was blocked (32+/-12 ms) than when it propagated through the LPA region (63+/-20 ms). LPAs exist after successful and failed shocks near the DFT. Thus, the time from the shock to the GPA is not totally electrically silent.

  1. Canadian National Vegetation Classification (CNVC)

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The mandate of the CNVC is to comprehensively classify and describe natural and semi-natural Canadian vegetation in an ecologically meaningful manner. The...

  2. Cruciferous Vegetables and Cancer Prevention

    Science.gov (United States)

    ... MO, Eggleston IM. The cancer chemopreventive actions of phytochemicals derived from glucosinolates. European Journal of Nutrition 2008; ... vegetables and risk of breast cancer: a pooled analysis of cohort studies. JAMA 2001;285(6):769- ...

  3. Vegetation - Lassen Foothills [ds564

    Data.gov (United States)

    California Department of Resources — In 2007 Aerial Information Systems, Inc. (AIS) was contracted by the California Native Plant Society (CNPS) to produce a vegetation map for approximately 100,000...

  4. Buffers and vegetative filter strips

    Science.gov (United States)

    Matthew J. Helmers; Thomas M. Isenhart; Michael G. Dosskey; Seth M. Dabney

    2008-01-01

    This chapter describes the use of buffers and vegetative filter strips relative to water quality. In particular, we primarily discuss the herbaceous components of the following NRCS Conservation Practice Standards.

  5. Sanitation Can Be A Foundation Disease Management Tool: Potential Of Spreading Binucleate Rhizoctonia from Nursery Propagation Floors To Trays Containing Azalea Stem Cuttings

    Science.gov (United States)

    Binucelate Rhizoctonia spp. (BNR), the cause of web blight, are present all year on container-grown azaleas in the southern U.S. BNR can be eliminated during vegetative propagation by submerging stem cuttings in 50°C water for 21 minutes. The objective was to evaluate risk of rooting trays being con...

  6. The Circumpolar Arctic vegetation map

    Science.gov (United States)

    Walker, Donald A.; Raynolds, Martha K.; Daniels, F.J.A.; Einarsson, E.; Elvebakk, A.; Gould, W.A.; Katenin, A.E.; Kholod, S.S.; Markon, C.J.; Melnikov, E.S.; Moskalenko, N.G.; Talbot, S. S.; Yurtsev, B.A.; Bliss, L.C.; Edlund, S.A.; Zoltai, S.C.; Wilhelm, M.; Bay, C.; Gudjonsson, G.; Ananjeva, G.V.; Drozdov, D.S.; Konchenko, L.A.; Korostelev, Y.V.; Ponomareva, O.E.; Matveyeva, N.V.; Safranova, I.N.; Shelkunova, R.; Polezhaev, A.N.; Johansen, B.E.; Maier, H.A.; Murray, D.F.; Fleming, Michael D.; Trahan, N.G.; Charron, T.M.; Lauritzen, S.M.; Vairin, B.A.

    2005-01-01

    Question: What are the major vegetation units in the Arctic, what is their composition, and how are they distributed among major bioclimate subzones and countries? Location: The Arctic tundra region, north of the tree line. Methods: A photo-interpretive approach was used to delineate the vegetation onto an Advanced Very High Resolution Radiometer (AVHRR) base image. Mapping experts within nine Arctic regions prepared draft maps using geographic information technology (ArcInfo) of their portion of the Arctic, and these were later synthesized to make the final map. Area analysis of the map was done according to bioclimate subzones, and country. The integrated mapping procedures resulted in other maps of vegetation, topography, soils, landscapes, lake cover, substrate pH, and above-ground biomass. Results: The final map was published at 1:7 500 000 scale map. Within the Arctic (total area = 7.11 x 106 km 2), about 5.05 ?? 106 km2 is vegetated. The remainder is ice covered. The map legend generally portrays the zonal vegetation within each map polygon. About 26% of the vegetated area is erect shrublands, 18% peaty graminoid tundras, 13% mountain complexes, 12% barrens, 11% mineral graminoid tundras, 11% prostrate-shrub tundras, and 7% wetlands. Canada has by far the most terrain in the High Arctic mostly associated with abundant barren types and prostrate dwarf-shrub tundra, whereas Russia has the largest area in the Low Arctic, predominantly low-shrub tundra. Conclusions: The CAVM is the first vegetation map of an entire global biome at a comparable resolution. The consistent treatment of the vegetation across the circumpolar Arctic, abundant ancillary material, and digital database should promote the application to numerous land-use, and climate-change applications and will make updating the map relatively easy. ?? IAVS; Opulus Press.

  7. Characterization of viruses associated with garlic plants propagated from different reproductive tissues from Italy and other geographic regions

    Directory of Open Access Journals (Sweden)

    Leonardo PARRANO

    2013-01-01

    Full Text Available Garlic is an important crop cultivated worldwide and several different viruses have been associated with propagative material. Garlic is propagated from bulbs and/or from vegetative topsets of the inflorescences known as bulbils. The effects of the geographic origin and the type of the propagative material on the phylogenetic relationships and genetic variability of the coat protein genes of four allium viruses are presented here. Onion yellow dwarf virus (OYDV, Leek yellow stripe virus (LYSV, Garlic virus X (GVX, and Garlic common latent virus (GCLV were detected in single and mixed infections in plants grown either from bulbils and/or bulbs originating from Italy, China, Argentina, and the U.S.A. OYDV and LYSV fell into five and three well supported clades respectively whereas isolates of GVX and GCLV all clustered into one well-supported clade each. Some of the OYDV and LYSV clades presented evidence of host tissue selection while some phylogenetic structuring based on the geographic origin or host was also observed for some virus clades. Unique haplotypes and novel coat protein amino acid sequence patterns were identified for all viruses. An OYDV coat protein amino acid signature unique to Chenopodium quinoa, an uncommon host of the virus, was of particular interest. The type of propagative material affected the population dynamics of all of the viruses. The virus populations in plants propagated from bulbs were more diverse than in plants propagated from bulbils.

  8. In vitro propagation of ginger (Zingiber officinale Rosc.) through direct organogenesis: a review.

    Science.gov (United States)

    Seran, Thayamini H

    2013-12-15

    Ginger (Zingiber officinale Rosc.) is a perennial herb. It belongs to the family Zingiberaceae and commercially cultivated in most tropical regions of the world. The underground rhizomes are the planting materials in a conventional propagation of ginger however it has a low multiplication rate. It is known that there are possible methods are available for rapid vegetative propagation of ginger through direct organogenesis or somatic embryogenesis under in vitro conditions but it is necessary to find the best protocol for in vitro multiplication of ginger. Limited studies on the tissue culture technology of ginger are available in Sri Lanka. However, significant efforts have been made in the procedure for in vitro micropropagation in the other ginger growing countries. The available literature with respect to in vitro plant regeneration has been perused and this review mainly focused on the in vitro propagation via direct organogenesis from rhizome buds or shoot tips of ginger often used as explants. This review article may be an appropriate and effective guidance for establishing in vitro cultures and subsequent production of in vitro plantlets in clonal propagation of ginger.

  9. Controls on flood and sediment wave propagation

    Science.gov (United States)

    Bakker, Maarten; Lane, Stuart N.; Costa, Anna; Molnar, Peter

    2015-04-01

    The understanding of flood wave propagation - celerity and transformation - through a fluvial system is of generic importance for flood forecasting/mitigation. In association with flood wave propagation, sediment wave propagation may induce local erosion and sedimentation, which will affect infrastructure and riparian natural habitats. Through analysing flood and sediment wave propagation, we gain insight in temporal changes in transport capacity (the flood wave) and sediment availability and transport (the sediment wave) along the river channel. Heidel (1956) was amongst the first to discuss the progressive lag of sediment concentration behind the corresponding flood wave based on field measurements. Since then this type of hysteresis has been characterized in a number of studies, but these were often based on limited amount of floods and measurement sites, giving insufficient insight into associated forcing mechanisms. Here, as part of a project concerned with the hydrological and geomorphic forcing of sediment transfer processes in alpine environments, we model the downstream propagation of short duration, high frequency releases of water and sediment (purges) from a flow intake in the Borgne d'Arolla River in south-west Switzerland. A total of >50 events were measured at 1 minute time intervals using pressure transducers and turbidity probes at a number of sites along the river. We show that flood and sediment wave propagation can be well represented through simple convection diffusion models. The models are calibrated/validated to describe the set of measured waves and used to explain the observed variation in wave celerity and diffusion. In addition we explore the effects of controlling factors including initial flow depth, flood height, flood duration, bed roughness, bed slope and initial sediment concentration, on the wave propagation processes. We show that the effects of forcing mechanisms on flood and sediment wave propagation will lead to different

  10. Markov transitions and the propagation of chaos

    Energy Technology Data Exchange (ETDEWEB)

    Gottlieb, Alexander David [Univ. of California, Berkeley, CA (United States)

    1998-12-01

    The propagation of chaos is a central concept of kinetic theory that serves to relate the equations of Boltzmann and Vlasov to the dynamics of many-particle systems. Propagation of chaos means that molecular chaos, i.e., the stochastic independence of two random particles in a many-particle system, persists in time, as the number of particles tends to infinity. We establish a necessary and sufficient condition for a family of general n-particle Markov processes to propagate chaos. This condition is expressed in terms of the Markov transition functions associated to the n-particle processes, and it amounts to saying that chaos of random initial states propagates if it propagates for pure initial states. Our proof of this result relies on the weak convergence approach to the study of chaos due to Sztitman and Tanaka. We assume that the space in which the particles live is homomorphic to a complete and separable metric space so that we may invoke Prohorov's theorem in our proof. We also s how that, if the particles can be in only finitely many states, then molecular chaos implies that the specific entropies in the n-particle distributions converge to the entropy of the limiting single-particle distribution.

  11. Classification of neocortical interneurons using affinity propagation

    Science.gov (United States)

    Santana, Roberto; McGarry, Laura M.; Bielza, Concha; Larrañaga, Pedro; Yuste, Rafael

    2013-01-01

    In spite of over a century of research on cortical circuits, it is still unknown how many classes of cortical neurons exist. In fact, neuronal classification is a difficult problem because it is unclear how to designate a neuronal cell class and what are the best characteristics to define them. Recently, unsupervised classifications using cluster analysis based on morphological, physiological, or molecular characteristics, have provided quantitative and unbiased identification of distinct neuronal subtypes, when applied to selected datasets. However, better and more robust classification methods are needed for increasingly complex and larger datasets. Here, we explored the use of affinity propagation, a recently developed unsupervised classification algorithm imported from machine learning, which gives a representative example or exemplar for each cluster. As a case study, we applied affinity propagation to a test dataset of 337 interneurons belonging to four subtypes, previously identified based on morphological and physiological characteristics. We found that affinity propagation correctly classified most of the neurons in a blind, non-supervised manner. Affinity propagation outperformed Ward's method, a current standard clustering approach, in classifying the neurons into 4 subtypes. Affinity propagation could therefore be used in future studies to validly classify neurons, as a first step to help reverse engineer neural circuits. PMID:24348339

  12. Propagation of waves in a gravitating and rotating anisotropic heat ...

    African Journals Online (AJOL)

    Bheema

    propagations become anti-symmetric. It is illustrated that the phase speed of the forward propagating mode increases with increasing drift and the backward propagating mode decreases with increasing drift. In this particular direction of propagation and axis of rotation, this wave mode is also independent of rotation ...

  13. Coherent structures for front propagation in fluids

    Science.gov (United States)

    Mitchell, Kevin; Mahoney, John

    2014-03-01

    Our goal is to characterize the nature of reacting flows by identifying important ``coherent'' structures. We follow the recent work by Haller, Beron-Vera, and Farazmand which formalized the notion of lagrangian coherent structures (LCSs) in fluid flows. In this theory, LCSs were derived from the Cauchy-Green strain tensor. We adapt this perspective to analogously define coherent structures in reacting flows. By this we mean a fluid flow with a reaction front propagating through it such that the propagation does not affect the underlying flow. A reaction front might be chemical (Belousov-Zhabotinsky, flame front, etc.) or some other type of front (electromagnetic, acoustic, etc.). While the recently developed theory of burning invariant manifolds (BIMs) describes barriers to front propagation in time-periodic flows, this current work provides an important complement by extending to the aperiodic setting. Funded by NSF Grant CMMI-1201236.

  14. Displacement of squeezed propagating microwave states

    Science.gov (United States)

    Fedorov, Kirill G.; Zhong, Ling; Pogorzalek, Stefan; Eder, Peter; Fischer, Michael; Goetz, Jan; Wulschner, Friedrich; Xie, Edwar; Menzel, Edwin; Deppe, Frank; Marx, Achim; Gross, Rudolf

    Displacement of propagating squeezed states is a fundamental operation for quantum communications. It can be applied to fundamental studies of macroscopic quantum coherence and has an important role in quantum teleportation protocols with propagating microwaves. We generate propagating squeezed states using a Josephson parametric amplifier and implement displacement using a cryogenic directional coupler. We study single- and two-mode displacement regimes. For the single-mode displacement we find that the squeezing level of the displaced squeezed state does not depend on the displacement amplitude. Also, we observe that quantum entanglement between two spatially separated channels stays constant across 4 orders of displacement power. We acknowledge support by the German Research Foundation through SFB 631 and FE 1564/1-1, the EU project PROMISCE, and Elite Network of Bavaria through the program ExQM.

  15. Propagating Characteristics of Pulsed Laser in Rain

    Directory of Open Access Journals (Sweden)

    Jing Guo

    2015-01-01

    Full Text Available To understand the performance of laser ranging system under the rain weather condition, we need to know the propagating characteristics of laser pulse in rain. In this paper, the absorption and attenuation coefficients were calculated based on the scattering theories in discrete stochastic media, and the propagating characteristics of laser pulse in rain were simulated and analyzed using Monte-Carlo method. Some simulation results were verified by experiments, and the simulation results are well matched with the experimental data, with the maximal deviation not less than 7.5%. The results indicated that the propagating laser beam would be attenuated and distorted due to the scattering and absorption of raindrops, and the energy attenuation and pulse shape distortion strongly depended on the laser pulse widths.

  16. Polarization Shaping for Control of Nonlinear Propagation

    Science.gov (United States)

    Bouchard, Frédéric; Larocque, Hugo; Yao, Alison M.; Travis, Christopher; De Leon, Israel; Rubano, Andrea; Karimi, Ebrahim; Oppo, Gian-Luca; Boyd, Robert W.

    2016-12-01

    We study the nonlinear optical propagation of two different classes of light beams with space-varying polarization—radially symmetric vector beams and Poincaré beams with lemon and star topologies—in a rubidium vapor cell. Unlike Laguerre-Gauss and other types of beams that quickly experience instabilities, we observe that their propagation is not marked by beam breakup while still exhibiting traits such as nonlinear confinement and self-focusing. Our results suggest that, by tailoring the spatial structure of the polarization, the effects of nonlinear propagation can be effectively controlled. These findings provide a novel approach to transport high-power light beams in nonlinear media with controllable distortions to their spatial structure and polarization properties.

  17. SDEM modelling of fault-propagation folding

    DEFF Research Database (Denmark)

    Clausen, O.R.; Egholm, D.L.; Poulsen, Jane Bang

    2009-01-01

    and variations in Mohr-Coulomb parameters including internal friction. Using SDEM modelling, we have mapped the propagation of the tip-line of the fault, as well as the evolution of the fold geometry across sedimentary layers of contrasting rheological parameters, as a function of the increased offset......Understanding the dynamics and kinematics of fault-propagation-folding is important for evaluating the associated hydrocarbon play, for accomplishing reliable section balancing (structural reconstruction), and for assessing seismic hazards. Accordingly, the deformation style of fault......-propagation-folding has already been the topic of a large number of empirical studies as well as physical and computational model experiments. However, with the newly developed Stress-based Discrete Element Method (SDEM), we have, for the first time, explored computationally the link between self-emerging fault patterns...

  18. RGB picture vegetation indexes for High-Throughput Phenotyping Platforms (HTPPs)

    Science.gov (United States)

    Kefauver, Shawn C.; El-Haddad, George; Vergara-Diaz, Omar; Araus, José Luis

    2015-10-01

    Extreme and abnormal weather events, as well as the more gradual meteorological changes associated with climate change, often coincide with not only increased abiotic risks (such as increases in temperature and decreases in precipitation), but also increased biotic risks due to environmental conditions that favor the rapid spread of crop pests and diseases. Durum wheat is by extension the most cultivated cereal in the south and east margins of the Mediterranean Basin. It is of strategic importance for Mediterranean agriculture to develop new varieties of durum wheat with greater production potential, better adaptation to increasingly adverse environmental conditions (drought) and better grain quality. Similarly, maize is the top staple crop for low-income populations in Sub-Saharan Africa and is currently suffering from the appearance of new diseases, which, together with increased abiotic stresses from climate change, are challenging the very sustainability of African societies. Current constraints in field phenotyping remain a major bottleneck for future breeding advances, but RGB-based High-Throughput Phenotyping Platforms (HTPPs) have shown promise for rapidly developing both disease-resistant and weather-resilient crops. RGB cameras have proven costeffective in studies assessing the effect of abiotic stresses, but have yet to be fully exploited to phenotype disease resistance. Recent analyses of durum wheat in Spain have shown RGB vegetation indexes to outperform multispectral indexes such as NDVI consistently in disease and yield prediction. Towards HTTP development for breeding maize disease resistance, some of the same RGB picture vegetation indexes outperformed NDVI (Normalized Difference Vegetation Index), with R2 values up to 0.65, compared to 0.56 for NDVI. . Specifically, hue, a*, u*, and Green Area (GA), as produced by FIJI and BreedPix open source software, performed similar to or better than NDVI in predicting yield and disease severity conditions

  19. Wave propagation, scattering and emission in complex media

    Science.gov (United States)

    Jin, Ya-Qiu

    . Gitterman. Transformation of the spectrum of scattered radiation in randomly inhomogeneous absorptive plasma layer / G. V. Jandieri, G. D. Aburjunia, V. G. Jandieri. Numerical analysis of microwave heating on saponification reaction / K. Huang, K. Jia -- IV. Scattering from complex targets. Analysis of electromagnetic scattering from layered crossed-gratings of circular cylinders using lattice sums technique / K. Yasumoto, H. T. Jia. Scattering by a body in a random medium / M. Tateiba, Z. Q. Meng, H. El-Ocla. A rigorous analysis of electromagnetic scattering from multilayered crossed-arrays of metallic cylinders / H. T. Jia, K. Yasumoto. Vector models of non-stable and spatially-distributed radar objects / A. Surkov ... [et al.]. Simulation of algorithm of orthogonal signals forming and processing used to estimate back scattering matrix of non-stable radar objects / D. Nosov ... [et al.]. New features of scattering from a dielectric film on a reflecting metal substrate / Z. H. Gu, I. M. Fuks, M. Ciftan. A higher order FDTD method for EM wave propagation in collision plasmas / S. B. Liu, J. J. Mo, N. C. Yuan -- V. Radiative transfer and remote sensing. Simulating microwave emission from Antarctica ice sheet with a coherent model / M. Tedesco, P. Pampaloni. Scattering and emission from inhomogeneous vegetation canopy and alien target by using three-dimensional Vector Radiative Transfer (3D-VRT) equation / Y. Q. Jin, Z. C. Liang. Analysis of land types using high-resolution satellite images and fractal approach / H. G. Zhang ... [et al.]. Data fusion of RADARSAT SAR and DMSP SSM/I for monitoring sea ice of China's Bohai Sea / Y. Q. Jin. Retrieving atmospheric temperature profiles from simulated microwave radiometer data with artificial neural networks / Z. G. Yao, H. B. Chen -- VI. Wave propagation and wireless communication. Wireless propagation in urban environments: modeling and experimental verification / D. Erricolo ... [et al.]. An overview of physics-based wave

  20. Enhanced effects of subluminal and superluminal propagation

    Energy Technology Data Exchange (ETDEWEB)

    Xiao Feng; Guo Hong; Li Luming; Liu Cheng; Chen Xuzong

    2004-06-21

    We have experimentally investigated the enhanced effects of subluminal and superluminal propagation, based on electromagnetically induced transparency (EIT) and electromagnetically induced absorption (EIA), respectively. By adding only an incoherently pumping laser to each case, the slower subluminal group velocity, and the faster superluminal pulse propagation are, respectively, observed. By only changing the intensity of the incoherent pumping beam, we are able to control, respectively, the subluminal group velocity continuously from v{sub g}=c/20000 to v{sub g}=c/8300, and superluminal group velocity from v{sub g}=-c/1667 to v{sub g}=-c/3030. Qualitative explanations for the two cases are given.