Multiple soliton production and the Korteweg-de Vries equation.

Science.gov (United States)

Hershkowitz, N.; Romesser, T.; Montgomery, D.

1972-01-01

Compressive square-wave pulses are launched in a double-plasma device. Their evolution is interpreted according to the Korteweg-de Vries description of Washimi and Taniuti. Square-wave pulses are an excitation for which an explicit solution of the Schrodinger equation permits an analytical prediction of the number and amplitude of emergent solitons. Bursts of energetic particles (pseudowaves) appear above excitation voltages greater than an electron thermal energy, and may be mistaken for solitons.

Long-Time Asymptotics for the Korteweg-de Vries Equation via Nonlinear Steepest Descent

International Nuclear Information System (INIS)

Grunert, Katrin; Teschl, Gerald

2009-01-01

We apply the method of nonlinear steepest descent to compute the long-time asymptotics of the Korteweg-de Vries equation for decaying initial data in the soliton and similarity region. This paper can be viewed as an expository introduction to this method

Modified Korteweg-deVries soliton evolution at critical density of negative ions in an inhomogeneous magnetized cold plasma

International Nuclear Information System (INIS)

Singh, Dhananjay K.; Malik, Hitendra K.

2007-01-01

Soliton propagation at critical density of negative ions is studied for weakly inhomogeneous magnetized cold plasma having positive ions, negative ions, and electrons. A general phase velocity relation is obtained and possible modes are studied for different cases involving different constituents of the plasma. Two types of modes (fast and slow) are found to propagate for the equal mass of the positive and negative ions. However, a limit on the obliqueness of magnetic field is obtained for the propagation of slow mode. For both types of modes, a variable coefficient modified Korteweg-deVries equation with an additional term arisen due to the density gradient is realized, which admits solutions for compressive solitons and rarefactive solitons of the same amplitudes at critical negative ion density. The propagation characteristics of these solitons are studied under the effect of densities of ions, magnetic field, and its obliqueness. The amplitudes of fast and slow wave solitons show their opposite behavior with the negative ion concentration, which is consistent with the variation of phase velocities with the negative ion density

Simple connection between conservation laws in the Korteweg--de Vriesand sine-Gordon systems

International Nuclear Information System (INIS)

Chodos, A.

1980-01-01

An infinite sequence of conserved quantities follows from the Lax representation in both the Korteweg--de Vries and sine-Gordon systems. We show that these two sequences are related by a simple substitution. In an appendix, two different methods of deriving conservation laws from the Lax representation are presented

Small-amplitude limit of the spectral transform for the periodic Korteweg-de Vries equation

Energy Technology Data Exchange (ETDEWEB)

Osborne, A R; Bergamasco, L

1985-02-01

The inverse spectral transform for the periodic Korteweg-de Vries equation is investigated in the limit for small-amplitude waves and the inverse Fourier transform is recovered. In the limiting process we find that the widths of the forbidden bands approach the amplitudes of the Fourier spectrum. The number of spectral bands is estimated from Fourier theory and depends explicitly on the assumed spatial discretization in the wave amplitude function (potential). This allows one to estimate the number of degrees of freedom in a discrete (and, therefore, finite-banded) potential. An essential feature of the calculations is that all results for the periodic problem are cast in terms of the infinite-line reflection and transmission coefficients b(k), a(k). Thus the connection between the whole-line and periodic problems is clear at every stage of the computations.

Numerical studies of the stochastic Korteweg-de Vries equation

International Nuclear Information System (INIS)

Lin Guang; Grinberg, Leopold; Karniadakis, George Em

2006-01-01

We present numerical solutions of the stochastic Korteweg-de Vries equation for three cases corresponding to additive time-dependent noise, multiplicative space-dependent noise and a combination of the two. We employ polynomial chaos for discretization in random space, and discontinuous Galerkin and finite difference for discretization in physical space. The accuracy of the stochastic solutions is investigated by comparing the first two moments against analytical and Monte Carlo simulation results. Of particular interest is the interplay of spatial discretization error with the stochastic approximation error, which is examined for different orders of spatial and stochastic approximation

Differential-algebraic integrability analysis of the generalized Riemann type and Korteweg-de Vries hydrodynamical equations

Energy Technology Data Exchange (ETDEWEB)

Prykarpatsky, Anatoliy K [Department of Mining Geodesy, AGH University of Science and Technology, Cracow 30059 (Poland); Artemovych, Orest D [Department of Algebra and Topology, Faculty of Mathematics and Informatics of the Vasyl Stefanyk Pre-Carpathian National University, Ivano-Frankivsk (Ukraine); Popowicz, Ziemowit [Institute of Theoretical Physics, University of Wroclaw (Poland); Pavlov, Maxim V, E-mail: pryk.anat@ua.f, E-mail: artemo@usk.pk.edu.p, E-mail: ziemek@ift.uni.wroc.p, E-mail: M.V.Pavlov@lboro.ac.u [Department of Mathematical Physics, P.N. Lebedev Physical Institute, 53 Leninskij Prospekt, Moscow 119991 (Russian Federation)

2010-07-23

A differential-algebraic approach to studying the Lax-type integrability of the generalized Riemann-type hydrodynamic equations at N = 3, 4 is devised. The approach is also applied to studying the Lax-type integrability of the well-known Korteweg-de Vries dynamical system.

Differential-algebraic integrability analysis of the generalized Riemann type and Korteweg-de Vries hydrodynamical equations

International Nuclear Information System (INIS)

Prykarpatsky, Anatoliy K; Artemovych, Orest D; Popowicz, Ziemowit; Pavlov, Maxim V

2010-01-01

A differential-algebraic approach to studying the Lax-type integrability of the generalized Riemann-type hydrodynamic equations at N = 3, 4 is devised. The approach is also applied to studying the Lax-type integrability of the well-known Korteweg-de Vries dynamical system.

Korteweg de Vries Description of One-Dimensional Superfluid Fermi Gases

International Nuclear Information System (INIS)

Xu Yan-Xia; Duan Wen-Shan

2011-01-01

We study one-dimensional matter-wave pulses in cigar-shaped superfluid Fermi gases, including the linear and nonlinear waves of the system. A Korteweg de Vries (KdV) solitary wave is obtained for the superfluid Fermi gases in the limited case of a BEC regime, a BCS regime and unitarity. The dependences of the propagation velocity, amplitude and the width of the solitary wave on the dimensionless interaction parameter y = 1/(k F a sc ) are given for the limited cases of BEC and unitarity. (physics of gases, plasmas, and electric discharges)

Wronskians, generalized Wronskians and solutions to the Korteweg-de Vries equation

International Nuclear Information System (INIS)

Ma Wenxiu

2004-01-01

A bridge going from Wronskian solutions to generalized Wronskian solutions of the Korteweg-de Vries (KdV) equation is built. It is then shown that generalized Wronskian solutions can be viewed as Wronskian solutions. The idea is used to generate positons, negatons and their interaction solutions to the KdV equation. Moreover, general positons and negatons are constructed through the Wronskian formulation. A few new exact solutions to the KdV equation are explicitly presented as examples of Wronskian solutions

Multiple solutions for the Schwarzian Korteweg-de Vries equation in (2 + 1) dimensions

International Nuclear Information System (INIS)

Ramirez, J.; Romero, J.L.; Bruzon, M.S.; Gandarias, M.L.

2007-01-01

In this paper we find new families of solutions for the (2 + 1)-dimensional integrable Schwarzian Korteweg-de Vries equation, that depend up to two arbitrary functions and a solution of a Riemann wave equation. Some of these solutions exhibit a rich dynamic, with a wide variety of qualitative behavior and structures that are exponentially localized. We have also found several families of overturning and intertwining solutions for the equation, that correspond to the nonconstant solutions of Riemann equations

Soliton solutions of the mixed discrete modified Korteweg-de Vries hierarchy via the inverse scattering transform

International Nuclear Information System (INIS)

Li Qi; Duan Qiuyuan; Zhang Jianbing

2012-01-01

The mixed discrete modified Korteweg-de Vries (mKdV) hierarchy and the Lax pair are derived. The hierarchy related to the Ablowitz-Ladik spectral problem is reduced to the isospectral discrete mKdV hierarchy and to the non-isospectral discrete mKdV hierarchy. N-soliton solutions of the hierarchies are obtained through inverse scattering transform.

On an integrable discretization of the modified Korteweg-de Vries equation

Science.gov (United States)

Suris, Yuri B.

1997-02-01

We find time discretizations for the two “second flows” of the Ablowitz-Ladik hierachy. These discretizations are described by local equations of motion, as opposed to the previously known ones, due to Taha and Ablowitz. Certain superpositions of our maps allow a one-field reduction and serve therefore as valid space-time discretizations of the modified Korteweg-de Vries equation. We expect the performance of these discretizations to be much better then that of the Taha-Ablowitz scheme. The way of finding interpolating Hamiltonians for our maps is also indicated, as well as the solution of an initial value problem in terms of matrix factorizations.

Variability of a "force signature" during windmill softball pitching and relationship between discrete force variables and pitch velocity.

Science.gov (United States)

Nimphius, Sophia; McGuigan, Michael R; Suchomel, Timothy J; Newton, Robert U

2016-06-01

This study assessed reliability of discrete ground reaction force (GRF) variables over multiple pitching trials, investigated the relationships between discrete GRF variables and pitch velocity (PV) and assessed the variability of the "force signature" or continuous force-time curve during the pitching motion of windmill softball pitchers. Intraclass correlation coefficient (ICC) for all discrete variables was high (0.86-0.99) while the coefficient of variance (CV) was low (1.4-5.2%). Two discrete variables were significantly correlated to PV; second vertical peak force (r(5)=0.81, p=0.03) and time between peak forces (r(5)=-0.79; p=0.03). High ICCs and low CVs support the reliability of discrete GRF and PV variables over multiple trials and significant correlations indicate there is a relationship between the ability to produce force and the timing of this force production with PV. The mean of all pitchers' curve-average standard deviation of their continuous force-time curves demonstrated low variability (CV=4.4%) indicating a repeatable and identifiable "force signature" pattern during this motion. As such, the continuous force-time curve in addition to discrete GRF variables should be examined in future research as a potential method to monitor or explain changes in pitching performance. Copyright © 2016 Elsevier B.V. All rights reserved.

Korteweg-de Vries description of Helmholtz-Kerr dark solitons

Energy Technology Data Exchange (ETDEWEB)

Christian, J M [Joule Physics Laboratory, School of Computing, Science and Engineering, Institute for Materials Research, University of Salford, Salford M5 4WT (United Kingdom) ; McDonald, G S [Joule Physics Laboratory, School of Computing, Science and Engineering, Institute for Materials Research, University of Salford, Salford M5 4WT (United Kingdom) ; Chamorro-Posada, P [Departmento de TeorIa de la Senal y Comunicaciones e IngenierIa Telematica, Universidad de Valladolid, ETSI Telecomunicacion, Campus Miguel Delibes s/n, 47011 Valladolid (Spain)

2006-12-15

A wide variety of different physical systems can be described by a relatively small set of universal equations. For example, small-amplitude nonlinear Schroedinger dark solitons can be described by a Korteweg-de Vries (KdV) equation. Reductive perturbation theory, based on linear boosts and Gallilean transformations, is often employed to establish connections to and between such universal equations. Here, a novel analytical approach reveals that the evolution of small-amplitude Helmholtz-Kerr dark solitons is also governed by a KdV equation. This broadens the class of nonlinear systems that are known to possess KdV soliton solutions, and provides a framework for perturbative analyses when propagation angles are not negligibly small. The derivation of this KdV equation involves an element that appears new to weakly nonlinear analyses, since transformations are required to preserve the rotational symmetry inherent to Helmholtz-type equations.

Korteweg-de Vries description of Helmholtz-Kerr dark solitons

International Nuclear Information System (INIS)

Christian, J M; McDonald, G S; Chamorro-Posada, P

2006-01-01

A wide variety of different physical systems can be described by a relatively small set of universal equations. For example, small-amplitude nonlinear Schroedinger dark solitons can be described by a Korteweg-de Vries (KdV) equation. Reductive perturbation theory, based on linear boosts and Gallilean transformations, is often employed to establish connections to and between such universal equations. Here, a novel analytical approach reveals that the evolution of small-amplitude Helmholtz-Kerr dark solitons is also governed by a KdV equation. This broadens the class of nonlinear systems that are known to possess KdV soliton solutions, and provides a framework for perturbative analyses when propagation angles are not negligibly small. The derivation of this KdV equation involves an element that appears new to weakly nonlinear analyses, since transformations are required to preserve the rotational symmetry inherent to Helmholtz-type equations

Revisit to self-organization of solitons for dissipative Korteweg-de Vries equation

International Nuclear Information System (INIS)

Kondoh, Y.; Van Dam, J.W.

1995-03-01

The process by which self-organization occurs for solitons described by the Korteweg-de Vries (KdV) equation with a viscous dissipation term is reinvestigated theoretically, with the use of numerical simulations in a periodic system. It is shown that, during nonlinear interactions, two basic processes for the self-organization of solitons are energy transfer and selective dissipation among the eigenmodes of the dissipative operator. It is also clarified that an important process during nonlinear self-organization is an interchange between the dominant operators, which has hitherto been overlooked in conventional self-organization theories and which leads to a final self-similar coherent structure determined uniquely by the dissipative operator

Conservation of energy for the Euler-Korteweg equations

KAUST Repository

Dębiec, Tomasz

2017-12-30

In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

Conservation of energy for the Euler-Korteweg equations

KAUST Repository

Dębiec, Tomasz; Gwiazda, Piotr; Świerczewska-Gwiazda, Agnieszka; Tzavaras, Athanasios

2017-01-01

In this article we study the principle of energy conservation for the Euler-Korteweg system. We formulate an Onsager-type sufficient regularity condition for weak solutions of the Euler-Korteweg system to conserve the total energy. The result applies to the system of Quantum Hydrodynamics.

Physical uniqueness of higher-order Korteweg-de Vries theory for continuously stratified fluids without background shear

Science.gov (United States)

Shimizu, Kenji

2017-10-01

The 2nd-order Korteweg-de Vries (KdV) equation and the Gardner (or extended KdV) equation are often used to investigate internal solitary waves, commonly observed in oceans and lakes. However, application of these KdV-type equations for continuously stratified fluids to geophysical problems is hindered by nonuniqueness of the higher-order coefficients and the associated correction functions to the wave fields. This study proposes to reduce arbitrariness of the higher-order KdV theory by considering its uniqueness in the following three physical senses: (i) consistency of the nonlinear higher-order coefficients and correction functions with the corresponding phase speeds, (ii) wavenumber-independence of the vertically integrated available potential energy, and (iii) its positive definiteness. The spectral (or generalized Fourier) approach based on vertical modes in the isopycnal coordinate is shown to enable an alternative derivation of the 2nd-order KdV equation, without encountering nonuniqueness. Comparison with previous theories shows that Parseval's theorem naturally yields a unique set of special conditions for (ii) and (iii). Hydrostatic fully nonlinear solutions, derived by combining the spectral approach and simple-wave analysis, reveal that both proposed and previous 2nd-order theories satisfy (i), provided that consistent definitions are used for the wave amplitude and the nonlinear correction. This condition reduces the arbitrariness when higher-order KdV-type theories are compared with observations or numerical simulations. The coefficients and correction functions that satisfy (i)-(iii) are given by explicit formulae to 2nd order and by algebraic recurrence relationships to arbitrary order for hydrostatic fully nonlinear and linear fully nonhydrostatic effects.

On the well-posedness of the Schrödinger-Korteweg-de Vries system

Science.gov (United States)

Guo, Zihua; Wang, Yuzhao

We prove that the Cauchy problem for the Schrödinger-Korteweg-de Vries system is locally well-posed for the initial data belonging to the Sobolev spaces L(R)×H(R), and H(R)×H(R) ( s>-1/16) for the resonant case. The new ingredient is that we use the F-type space, introduced by the first author in Guo (2009) [10], to deal with the KdV part of the system and the coupling terms. In order to overcome the difficulty caused by the lack of scaling invariance, we prove uniform estimates for the multiplier. This result improves the previous one by Corcho and Linares (2007) [6].

Negatons, positons, rational-like solutions and conservation laws of the Korteweg-de Vries equation with loss and non-uniformity terms

International Nuclear Information System (INIS)

Zhang Dajun; Chen Dengyuan

2004-01-01

Solitons, negatons, positons, rational-like solutions and mixed solutions of a non-isospectral equation, the Korteweg-de Vries equation with loss and non-uniformity terms, are obtained through the Wronskian technique. The non-isospectral characteristics of the motion behaviours of some solutions are described with some figures made by using Mathematica. We also derive an infinite number of conservation laws of the equation

Force and Directional Force Modulation Effects on Accuracy and Variability in Low-Level Pinch Force Tracking.

Science.gov (United States)

Park, Sangsoo; Spirduso, Waneen; Eakin, Tim; Abraham, Lawrence

2018-01-01

The authors investigated how varying the required low-level forces and the direction of force change affect accuracy and variability of force production in a cyclic isometric pinch force tracking task. Eighteen healthy right-handed adult volunteers performed the tracking task over 3 different force ranges. Root mean square error and coefficient of variation were higher at lower force levels and during minimum reversals compared with maximum reversals. Overall, the thumb showed greater root mean square error and coefficient of variation scores than did the index finger during maximum reversals, but not during minimum reversals. The observed impaired performance during minimum reversals might originate from history-dependent mechanisms of force production and highly coupled 2-digit performance.

Soliton evolution and radiation loss for the Korteweg--de Vries equation

International Nuclear Information System (INIS)

Kath, W.L.; Smyth, N.F.

1995-01-01

The time-dependent behavior of solutions of the Korteweg--de Vries (KdV) equation for nonsoliton initial conditions is considered. While the exact solution of the KdV equation can in principle be obtained using the inverse scattering transform, in practice it can be extremely difficult to obtain information about a solution's transient evolution by this method. As an alternative, we present here an approximate method for investigating this transient evolution which is based upon the conservation laws associated with the KdV equation. Initial conditions which form one or two solitons are considered, and the resulting approximate evolution is found to be in good agreement with the numerical solution of the KdV equation. Justification for the approximations employed is also given by way of the linearized inverse scattering solution of the KdV equation. In addition, the final soliton state determined from the approximate equations agrees very well with the final state determined from the exact inverse scattering transform solution

Travelling wave solutions and proper solutions to the two-dimensional Burgers-Korteweg-de Vries equation

International Nuclear Information System (INIS)

Feng Zhaosheng

2003-01-01

In this paper, we study the two-dimensional Burgers-Korteweg-de Vries (2D-BKdV) equation by analysing an equivalent two-dimensional autonomous system, which indicates that under some particular conditions, the 2D-BKdV equation has a unique bounded travelling wave solution. Then by using a direct method, a travelling solitary wave solution to the 2D-BKdV equation is expressed explicitly, which appears to be more efficient than the existing methods proposed in the literature. At the end of the paper, the asymptotic behaviour of the proper solutions of the 2D-BKdV equation is established by applying the qualitative theory of differential equations

Application of the heat-balance and refined integral methods to the Korteweg-de Vries equation

Directory of Open Access Journals (Sweden)

Myers Timothy G.

2009-01-01

Full Text Available In this paper we consider approximate travelling wave solutions to the Korteweg-de Vries equation. The heat-balance integral method is first applied to the problem, using two different quartic approximating functions, and then the refined integral method is investigated. We examine two types of solution, chosen by matching the wave speed to that of the exact solution and by imposing the same area. The first set of solutions is generally better with an error that is fixed in time. The second set of solutions has an error that grows with time. This is shown to be due to slight discrepancies in the wave speed.

On the motion of incompressible inhomogeneous Euler-Korteweg fluids

Czech Academy of Sciences Publication Activity Database

Bulíček, M.; Feireisl, Eduard; Málek, J.; Shvydkoy, R.

2010-01-01

Roč. 3, č. 3 (2010), s. 497-515 ISSN 1937-1632 R&D Projects: GA MŠk LC06052; GA ČR GA201/09/0917 Institutional research plan: CEZ:AV0Z10190503 Keywords : Korteweg fluid * inhomogeneous Euler fluid * Korteweg stress * local-in-time well-posedness * smooth solution Subject RIV: BA - General Mathematics http://www.aimsciences.org/journals/displayArticles.jsp?paperID=5226

Energy invariant for shallow-water waves and the Korteweg-de Vries equation: Doubts about the invariance of energy

Science.gov (United States)

Karczewska, Anna; Rozmej, Piotr; Infeld, Eryk

2015-11-01

It is well known that the Korteweg-de Vries (KdV) equation has an infinite set of conserved quantities. The first three are often considered to represent mass, momentum, and energy. Here we try to answer the question of how this comes about and also how these KdV quantities relate to those of the Euler shallow-water equations. Here Luke's Lagrangian is helpful. We also consider higher-order extensions of KdV. Though in general not integrable, in some sense they are almost so within the accuracy of the expansion.

Well-posedness of one-dimensional Korteweg models

Directory of Open Access Journals (Sweden)

Sylvie Benzoni-Gavage

2006-05-01

Full Text Available We investigate the initial-value problem for one-dimensional compressible fluids endowed with internal capillarity. We focus on the isothermal inviscid case with variable capillarity. The resulting equations for the density and the velocity, consisting of the mass conservation law and the momentum conservation with Korteweg stress, are a system of third order nonlinear dispersive partial differential equations. Additionally, this system is Hamiltonian and admits travelling solutions, representing propagating phase boundaries with internal structure. By change of unknown, it roughly reduces to a quasilinear Schrodinger equation. This new formulation enables us to prove local well-posedness for smooth perturbations of travelling profiles and almost-global existence for small enough perturbations. A blow-up criterion is also derived.

Nonlinear Korteweg-de Vries-Burger equation for ion-acoustic shock waves in the presence of kappa distributed electrons and positrons

International Nuclear Information System (INIS)

Shah, Asif; Saeed, R

2011-01-01

The ion-acoustic shock waves are studied in electron-positron-ion plasma. The plasma system is composed of three components, specifically relativistic adiabatic ions, kappa distributed electrons and positrons. The Korteweg-de Vries-Burger equation is derived, solved analytically. The effects of plasma parameters on the shock strength and steepness are investigated. The numerical results are presented graphically for illustration. The results may have importance in non-thermal and relativistic plasmas of pulsar magnetosphere (Arons 2009 Astrophys. Space Sci. Library 357 373; Blasi and Amato arXiv:1007.4745V1 [astro-Ph.HE]).

Stability properties of the Euler-Korteweg system with nonmonotone pressures

KAUST Repository

Giesselmann, Jan

2016-12-21

We establish a relative energy framework for the Euler-Korteweg system with non-convex energy. This allows us to prove weak-strong uniqueness and to show convergence to a Cahn-Hilliard system in the large friction limit. We also use relative energy to show that solutions of Euler-Korteweg with convex energy converge to solutions of the Euler system in the vanishing capillarity limit, as long as the latter admits sufficiently regular strong solutions.

Functional entropy variables: A new methodology for deriving thermodynamically consistent algorithms for complex fluids, with particular reference to the isothermal Navier–Stokes–Korteweg equations

Energy Technology Data Exchange (ETDEWEB)

Liu, Ju, E-mail: jliu@ices.utexas.edu [Institute for Computational Engineering and Sciences, The University of Texas at Austin, 201 East 24th Street, 1 University Station C0200, Austin, TX 78712 (United States); Gomez, Hector [Department of Mathematical Methods, University of A Coruña, Campus de Elviña, s/n, 15192 A Coruña (Spain); Evans, John A.; Hughes, Thomas J.R. [Institute for Computational Engineering and Sciences, The University of Texas at Austin, 201 East 24th Street, 1 University Station C0200, Austin, TX 78712 (United States); Landis, Chad M. [Aerospace Engineering and Engineering Mechanics, The University of Texas at Austin, 210 East 24th Street, 1 University Station C0600, Austin, TX 78712 (United States)

2013-09-01

We propose a new methodology for the numerical solution of the isothermal Navier–Stokes–Korteweg equations. Our methodology is based on a semi-discrete Galerkin method invoking functional entropy variables, a generalization of classical entropy variables, and a new time integration scheme. We show that the resulting fully discrete scheme is unconditionally stable-in-energy, second-order time-accurate, and mass-conservative. We utilize isogeometric analysis for spatial discretization and verify the aforementioned properties by adopting the method of manufactured solutions and comparing coarse mesh solutions with overkill solutions. Various problems are simulated to show the capability of the method. Our methodology provides a means of constructing unconditionally stable numerical schemes for nonlinear non-convex hyperbolic systems of conservation laws.

Solution of the pulse width modulation problem using orthogonal polynomials and Korteweg-de Vries equations.

Science.gov (United States)

Chudnovsky, D V; Chudnovsky, G V

1999-10-26

The mathematical underpinning of the pulse width modulation (PWM) technique lies in the attempt to represent "accurately" harmonic waveforms using only square forms of a fixed height. The accuracy can be measured using many norms, but the quality of the approximation of the analog signal (a harmonic form) by a digital one (simple pulses of a fixed high voltage level) requires the elimination of high order harmonics in the error term. The most important practical problem is in "accurate" reproduction of sine-wave using the same number of pulses as the number of high harmonics eliminated. We describe in this paper a complete solution of the PWM problem using Pade approximations, orthogonal polynomials, and solitons. The main result of the paper is the characterization of discrete pulses answering the general PWM problem in terms of the manifold of all rational solutions to Korteweg-de Vries equations.

Relative energy for the Korteweg theory and related Hamiltonian flows in gas dynamics

KAUST Repository

Giesselmann, Jan

2016-10-26

For an Euler system, with dynamics generated by a potential energy functional, we propose a functional format for the relative energy and derive a relative energy identity. The latter, when applied to specific energies, yields relative energy identities for the Euler-Korteweg, the Euler-Poisson, the Quantum Hydrodynamics system, and low order approximations of the Euler-Korteweg system. For the Euler-Korteweg system we prove a stability theorem between a weak and a strong solution and an associated weak-strong uniqueness theorem. In the second part we focus on the Navier-Stokes-Korteweg system (NSK) with non-monotone pressure laws: we prove stability for the NSK system via a modified relative energy approach. We prove continuous dependence of solutions on initial data and convergence of solutions of a low order model to solutions of the NSK system. The last two results provide physically meaningful examples of how higher order regularization terms enable the use of the relative energy framework for models with energies which are not poly- or quasi-convex, but compensating via higher-order gradients.

Temporal and Spatial Variabilities of Japan Sea Surface Temperature and Atmospheric Forcings

National Research Council Canada - National Science Library

Chu, Peter C; Chen, Yuchun; Lu, Shihua

1998-01-01

... and their relations to atmospheric forcing. First, we found an asymmetry in the correlation coefficients between SST and wind stress curl, which implies that the SST variability at the scales of the order of one month is largely due to atmospheric forcing...

Effect of externally applied periodic force on ion acoustic waves in superthermal plasmas

Science.gov (United States)

Chowdhury, Snigdha; Mandi, Laxmikanta; Chatterjee, Prasanta

2018-04-01

Ion acoustic solitary waves in superthermal plasmas are investigated in the presence of trapped electrons. The reductive perturbation technique is employed to obtain a forced Korteweg-de Vries-like Schamel equation. An analytical solution is obtained in the presence of externally applied force. The effect of the external applied periodic force is also observed. The effect of the spectral index (κ), the strength ( f 0 ) , and the frequency ( ω ) on the amplitude and width of the solitary wave is obtained. The result may be useful in laboratory plasma as well as space environments.

Portfolio theory of optimal isometric force production: Variability predictions and nonequilibrium fluctuation dissipation theorem

Science.gov (United States)

Frank, T. D.; Patanarapeelert, K.; Beek, P. J.

2008-05-01

We derive a fundamental relationship between the mean and the variability of isometric force. The relationship arises from an optimal collection of active motor units such that the force variability assumes a minimum (optimal isometric force). The relationship is shown to be independent of the explicit motor unit properties and of the dynamical features of isometric force production. A constant coefficient of variation in the asymptotic regime and a nonequilibrium fluctuation-dissipation theorem for optimal isometric force are predicted.

Portfolio theory of optimal isometric force production: Variability predictions and nonequilibrium fluctuation-dissipation theorem

International Nuclear Information System (INIS)

Frank, T.D.; Patanarapeelert, K.; Beek, P.J.

2008-01-01

We derive a fundamental relationship between the mean and the variability of isometric force. The relationship arises from an optimal collection of active motor units such that the force variability assumes a minimum (optimal isometric force). The relationship is shown to be independent of the explicit motor unit properties and of the dynamical features of isometric force production. A constant coefficient of variation in the asymptotic regime and a nonequilibrium fluctuation-dissipation theorem for optimal isometric force are predicted

The influence of lower leg configurations on muscle force variability.

Science.gov (United States)

Ofori, Edward; Shim, Jaeho; Sosnoff, Jacob J

2018-04-11

The maintenance of steady contractions is required in many daily tasks. However, there is little understanding of how various lower limb configurations influence the ability to maintain force. The purpose of the current investigation was to examine the influence of joint angle on various lower-limb constant force contractions. Nineteen adults performed knee extension, knee flexion, and ankle plantarflexion isometric force contractions to 11 target forces, ranging from 2 to 95% maximal voluntary contraction (MVC) at 2 angles. Force variability was quantified with mean force, standard deviation, and the coefficient of variation of force output. Non-linearities in force output were quantified with approximate entropy. Curve fitting analyses were performed on each set of data from each individual across contractions to further examine whether joint angle interacts with global functions of lower-limb force variability. Joint angle had significant effects on the model parameters used to describe the force-variability function for each muscle contraction (p force output were more explained by force level in smaller angle conditions relative to the larger angle conditions (p force production. Biomechanical factors, such as joint angle, along with neurophysiological factors should be considered together in the discussion of the dynamics of constant force production. Copyright © 2018 Elsevier Ltd. All rights reserved.

Solution of the Korteweg--de Vries equation in a half-space bounded by a wall

International Nuclear Information System (INIS)

Moses, H.E.

1976-01-01

A solution of the Korteweg--de Vries equation in the half-space 0 less than r less than infinity with the boundary condition V(0) = 0 is given. The boundary condition may be interpreted as the requirement that the plane which bounds the half-space be a rigid wall. Aside from possible physical interest, this solution, which is obtained from one of the potentials for the radial Schroedinger equation which do not scatter, appears to indicate that the radial Schroedinger equation and the corresponding Gel'fand--Levitan equation play a role in the case of the half-space bounded by a wall similar to that of the one-dimensional Schroedinger equation (-- infinity less than x less than infinity) and its corresponding Gel'fand--Levitan equation in the more usual full space treatment of the KdV equation. A possible interpretation of the solution presented is that it corresponds to the reflection of a wave by a wall, in which the incident wave is singular and the reflected wave is nonsingular but highly dispersive

Solving Variable Coefficient Fourth-Order Parabolic Equation by ...

African Journals Online (AJOL)

Solving Variable Coefficient Fourth-Order Parabolic Equation by Modified initial guess Variational ... variable coefficient fourth order parabolic partial differential equations. The new method shows rapid convergence to the exact solution.

Variable-coefficient higher-order nonlinear Schroedinger model in optical fibers: Variable-coefficient bilinear form, Baecklund transformation, brightons and symbolic computation

International Nuclear Information System (INIS)

Tian Bo; Gao Yitian; Zhu Hongwu

2007-01-01

Symbolically investigated in this Letter is a variable-coefficient higher-order nonlinear Schroedinger (vcHNLS) model for ultrafast signal-routing, fiber laser systems and optical communication systems with distributed dispersion and nonlinearity management. Of physical and optical interests, with bilinear method extend, the vcHNLS model is transformed into a variable-coefficient bilinear form, and then an auto-Baecklund transformation is constructed. Constraints on coefficient functions are analyzed. Potentially observable with future optical-fiber experiments, variable-coefficient brightons are illustrated. Relevant properties and features are discussed as well. Baecklund transformation and other results of this Letter will be of certain value to the studies on inhomogeneous fiber media, core of dispersion-managed brightons, fiber amplifiers, laser systems and optical communication links with distributed dispersion and nonlinearity management

CRE Solvability, Nonlocal Symmetry and Exact Interaction Solutions of the Fifth-Order Modified Korteweg-de Vries Equation

Science.gov (United States)

Cheng, Wen-Guang; Qiu, De-Qin; Yu, Bo

2017-06-01

This paper is concerned with the fifth-order modified Korteweg-de Vries (fmKdV) equation. It is proved that the fmKdV equation is consistent Riccati expansion (CRE) solvable. Three special form of soliton-cnoidal wave interaction solutions are discussed analytically and shown graphically. Furthermore, based on the consistent tanh expansion (CTE) method, the nonlocal symmetry related to the consistent tanh expansion (CTE) is investigated, we also give the relationship between this kind of nonlocal symmetry and the residual symmetry which can be obtained with the truncated Painlevé method. We further study the spectral function symmetry and derive the Lax pair of the fmKdV equation. The residual symmetry can be localized to the Lie point symmetry of an enlarged system and the corresponding finite transformation group is computed. Supported by National Natural Science Foundation of China under Grant No. 11505090, and Research Award Foundation for Outstanding Young Scientists of Shandong Province under Grant No. BS2015SF009

Variable-coefficient nonisospectral Toda lattice hierarchy and its ...

Indian Academy of Sciences (India)

In this paper, a hierarchy of nonisospectral equations with variable coefficients is derived from the ..... from the definitions of Lax integrability and Lax pairs [26] that the variable-coefficient ..... studying which will be the topic for our future study.

Extending the Constant Coefficient Solution Technique to Variable Coefficient Ordinary Differential Equations

Science.gov (United States)

Mohammed, Ahmed; Zeleke, Aklilu

2015-01-01

We introduce a class of second-order ordinary differential equations (ODEs) with variable coefficients whose closed-form solutions can be obtained by the same method used to solve ODEs with constant coefficients. General solutions for the homogeneous case are discussed.

Stability properties of the Euler-Korteweg system with nonmonotone pressures

KAUST Repository

Giesselmann, Jan; Tzavaras, Athanasios

2016-01-01

We establish a relative energy framework for the Euler-Korteweg system with non-convex energy. This allows us to prove weak-strong uniqueness and to show convergence to a Cahn-Hilliard system in the large friction limit. We also use relative energy

Effect of trapped electron on the dust ion acoustic waves in dusty plasma using time fractional modified Korteweg-de Vries equation

International Nuclear Information System (INIS)

Nazari-Golshan, A.; Nourazar, S. S.

2013-01-01

The time fractional modified Korteweg-de Vries (TFMKdV) equation is solved to study the nonlinear propagation of small but finite amplitude dust ion-acoustic (DIA) solitary waves in un-magnetized dusty plasma with trapped electrons. The plasma is composed of a cold ion fluid, stationary dust grains, and hot electrons obeying a trapped electron distribution. The TFMKdV equation is derived by using the semi-inverse and Agrawal's methods and then solved by the Laplace Adomian decomposition method. Our results show that the amplitude of the DIA solitary waves increases with the increase of time fractional order β, the wave velocity v 0 , and the population of the background free electrons λ. However, it is vice-versa for the deviation from isothermality parameter b, which is in agreement with the result obtained previously

Variable Eddington factors and flux-limiting diffusion coefficients

International Nuclear Information System (INIS)

Whalen, P.P.

1982-01-01

Variable Eddington factors and flux limiting diffusion coefficients arise in two common techniques of closing the moment equations of transport. The first two moment equations of the full transport equation are still frequently used to solve many problems of radiative or particle transport. An approximate analysis, developed by Levermore, exhibits the relation between the coefficients of the two different techniques. This analysis is described and then used to test the validity of several commonly used flux limiters and Eddington factors. All of the ad-hoc flux limiters have limited validity. All of the variable Eddington factors derived from some underlying description of the angular distribution function are generally valid. The use of coefficients from Minerbo's elegant maximum entropy Eddington factor analysis is suggested for use in either flux limited diffusion or variable Eddington factor equations

Soliton solutions to the fifth-order Korteweg-de Vries equation and their applications to surface and internal water waves

Science.gov (United States)

Khusnutdinova, K. R.; Stepanyants, Y. A.; Tranter, M. R.

2018-02-01

We study solitary wave solutions of the fifth-order Korteweg-de Vries equation which contains, besides the traditional quadratic nonlinearity and third-order dispersion, additional terms including cubic nonlinearity and fifth order linear dispersion, as well as two nonlinear dispersive terms. An exact solitary wave solution to this equation is derived, and the dependence of its amplitude, width, and speed on the parameters of the governing equation is studied. It is shown that the derived solution can represent either an embedded or regular soliton depending on the equation parameters. The nonlinear dispersive terms can drastically influence the existence of solitary waves, their nature (regular or embedded), profile, polarity, and stability with respect to small perturbations. We show, in particular, that in some cases embedded solitons can be stable even with respect to interactions with regular solitons. The results obtained are applicable to surface and internal waves in fluids, as well as to waves in other media (plasma, solid waveguides, elastic media with microstructure, etc.).

Confiabilidad entre instrumentos (T-Force® y Myotest® en la valoración de la fuerza. (Inter-machine Reliability (T-Force® y Myotest® in strength assessment.

Directory of Open Access Journals (Sweden)

Pedro Tomas Gómez-Piriz

2012-01-01

Full Text Available The purpose of this study was to determine the inter-machine reliability of two devices routinely used to measure variables in sports performance: the linear position measuring device (LPM, isoinertial dynamometer T-Force and the (AC 3-D accelerometer (Myotest Sport, S4P model. 40 bench press exercises (25 kg were analysed at concentric contraction phase and at maximum velocity, carried out by three different subjects (age: 26.74 ± 1.2 years, height: 175.74 ± 4.04 cm, weight: 78.7 ± 3.35 kg. Variables analysed comprised maximum velocity, maximum estimated force and estimated peak power. The data from both devices was collected simultaneously. Three simple lineal regression models were developed, supplied by the linear position measuring device (LPM on the basis of the accelerometer’s (AC data. The assumption of independence of errors was compared by means of the Durbin-Watson test. Partial autocorrelation coefficients were calculated for a p ResumenEl estudio pretende caracterizar la confiabilidad entre dos instrumentos, medidor de posicionamiento lineal (MPL, dinamómetro inercial T-Force y el acelerómetro (AC 3-D (Myotest Sport, modelo S4P, habituales en la medición de variables de rendimiento. Fueron analizados 40 ensayos en la realización del ejercicio press banca (25 kg en fase concéntrica a la máxima velocidad por tres sujetos (26.74 ± 1.2 años, 175.74 ± 4.04 cm, 78.7 ± 3.35 kg. Las variables analizadas fueron velocidad máxima, fuerza máxima estimada y pico de potencia estimado. Ambos aparatos obtuvieron los datos simultáneamente. Se desarrollaron tres modelos de regresión lineal simple proporcionados por el medidor de posicionamiento lineal (MPL a partir de los datos del acelerómetro (AC. Se contrastó el supuesto de independencia de los errores mediante la prueba de Durbin-Watson. Se calcularon autocorrelaciones parciales para un nivel de significación p

Painleve analysis for a forced Korteveg-de Vries equation arisen in fluid dynamics of internal solitary waves

Directory of Open Access Journals (Sweden)

Zhang Sheng

2015-01-01

Full Text Available In this paper, Painleve analysis is used to test the Painleve integrability of a forced variable-coefficient extended Korteveg-de Vries equation which can describe the weakly-non-linear long internal solitary waves in the fluid with continuous stratification on density. The obtained results show that the equation is integrable under certain conditions. By virtue of the truncated Painleve expansion, a pair of new exact solutions to the equation is obtained.

VODE, Variable Coefficient Ordinary Differential Equations (ODE) Solver

International Nuclear Information System (INIS)

Brown, P.N.; Hindmarsh, A.C.; Byrne, G.D.

2002-01-01

1 - Description of program or function: VODE is a package of subroutines for the numerical solution of the initial-value problem for systems of first-order ordinary differential equations. The package can be used for either stiff or non-stiff systems. In the stiff case, the Jacobian matrix is treated as full or banded. An algorithm is included for saving and reusing the Jacobian matrix under certain conditions. If storage is limited, this option may be suppressed. 2 - Method of solution - VODE uses the variable-order, variable- coefficient Adams-Moulton method for non-stiff systems and the variable-order, fixed-leading-coefficient Backward Differentiation Formula (BDF) method for stiff systems

Cylindrical solitons in shallow water of variable depth

International Nuclear Information System (INIS)

Carbonaro, P.; Floris, R.; Pantano, P.

1983-01-01

The propagation and the interaction of cylindrical solitons in shallow water of variable depth are studied. Starting from the cylindrically symmetric version of the equations describing long waves in a beach, a Korteweg-de Vries equation is derived. Since no exact analytical solution has been found to date for this equation, some remarkable cases in which the equation takes up a tractable form are analyzed. Finally the intercation between cylindrical imploding and expanding waves is considered and the phase shifts caused by the head-on collision are given

Hybrid (Vlasov-Fluid) simulation of ion-acoustic soliton chain formation and validity of Korteweg de-Vries model

Energy Technology Data Exchange (ETDEWEB)

Aminmansoor, F.; Abbasi, H., E-mail: abbasi@aut.ac.ir [Faculty of Energy Engineering and Physics, Amirkabir University of Technology, P.O. Box 15875-4413, Tehran (Iran, Islamic Republic of)

2015-08-15

The present paper is devoted to simulation of nonlinear disintegration of a localized perturbation into ion-acoustic solitons train in a plasma with hot electrons and cold ions. A Gaussian initial perturbation is used to model the localized perturbation. For this purpose, first, we reduce fluid system of equations to a Korteweg de-Vries equation by the following well-known assumptions. (i) On the ion-acoustic evolution time-scale, the electron velocity distribution function (EVDF) is assumed to be stationary. (ii) The calculation is restricted to small amplitude cases. Next, in order to generalize the model to finite amplitudes cases, the evolution of EVDF is included. To this end, a hybrid code is designed to simulate the case, in which electrons dynamics is governed by Vlasov equation, while cold ions dynamics is, like before, studied by the fluid equations. A comparison between the two models shows that although the fluid model is capable of demonstrating the general features of the process, to have a better insight into the relevant physics resulting from the evolution of EVDF, the use of kinetic treatment is of great importance.

Tracking variable sedimentation rates in orbitally forced paleoclimate proxy series

Science.gov (United States)

Li, M.; Kump, L. R.; Hinnov, L.

2017-12-01

This study addresses two fundamental issues in cyclostratigraphy: quantitative testing of orbital forcing in cyclic sedimentary sequences and tracking variable sedimentation rates. The methodology proposed here addresses these issues as an inverse problem, and estimates the product-moment correlation coefficient between the frequency spectra of orbital solutions and paleoclimate proxy series over a range of "test" sedimentation rates. It is inspired by the ASM method (1). The number of orbital parameters involved in the estimation is also considered. The method relies on the hypothesis that orbital forcing had a significant impact on the paleoclimate proxy variations, and thus is also tested. The null hypothesis of no astronomical forcing is evaluated using the Beta distribution, for which the shape parameters are estimated using a Monte Carlo simulation approach. We introduce a metric to estimate the most likely sedimentation rate using the product-moment correlation coefficient, H0 significance level, and the number of contributing orbital parameters, i.e., the CHO value. The CHO metric is applied with a sliding window to track variable sedimentation rates along the paleoclimate proxy series. Two forward models with uniform and variable sedimentation rates are evaluated to demonstrate the robustness of the method. The CHO method is applied to the classical Late Triassic Newark depth rank series; the estimated sedimentation rates match closely with previously published sedimentation rates and provide a more highly time-resolved estimate (2,3). References: (1) Meyers, S.R., Sageman, B.B., Amer. J. Sci., 307, 773-792, 2007; (2) Kent, D.V., Olsen, P.E., Muttoni, G., Earth-Sci. Rev.166, 153-180, 2017; (3) Li, M., Zhang, Y., Huang, C., Ogg, J., Hinnov, L., Wang, Y., Zou, Z., Li, L., 2017. Earth Plant. Sc. Lett. doi:10.1016/j.epsl.2017.07.015

Variability of peak shoulder force during wheelchair propulsion in manual wheelchair users with and without shoulder pain.

Science.gov (United States)

Moon, Y; Jayaraman, C; Hsu, I M K; Rice, I M; Hsiao-Wecksler, E T; Sosnoff, J J

2013-01-01

Manual wheelchair users report a high prevalence of shoulder pain. Growing evidence shows that variability in forces applied to biological tissue is related to musculoskeletal pain. The purpose of this study was to examine the variability of forces acting on the shoulder during wheelchair propulsion as a function of shoulder pain. Twenty-four manual wheelchair users (13 with pain, 11 without pain) participated in the investigation. Kinetic and kinematic data of wheelchair propulsion were recorded for 3 min maintaining a constant speed at three distinct propulsion speeds (fast speed of 1.1 m/s, a self-selected speed, and a slow speed of 0.7 m/s). Peak resultant shoulder forces in the push phase were calculated using inverse dynamics. Within individual variability was quantified as the coefficient of variation of cycle to cycle peak resultant forces. There was no difference in mean peak shoulder resultant force between groups. The pain group had significantly smaller variability of peak resultant force than the no pain group (Ppropulsion variability could be a novel marker of upper limb pain in manual wheelchair users. © 2013.

Aerodynamic force coefficients of plain bridge cables in wet conditions

DEFF Research Database (Denmark)

Matteoni, Giulia; Georgakis, Christos T.

In this paper, the aerodynamic forces and force coefficients from preliminary static wind tunnel tests on a plain cable in wet conditions are presented. The presented results are for several different relative cable wind-angles. A comparison is made with tests in dry conditions. In dry conditions...

Cryotherapy, Sensation, and Isometric-Force Variability

Science.gov (United States)

Denegar, Craig R.; Buckley, William E.; Newell, Karl M.

2003-01-01

Objective: To determine the changes in sensation of pressure, 2-point discrimination, and submaximal isometric-force production variability due to cryotherapy. Design and Setting: Sensation was assessed using a 2 × 2 × 2 × 3 repeated-measures factorial design, with treatment (ice immersion or control), limb (right or left), digit (finger or thumb), and sensation test time (baseline, posttreatment, or postisometric-force trials) as independent variables. Dependent variables were changes in sensation of pressure and 2-point discrimination. Isometric-force variability was tested with a 2 × 2 × 3 repeated-measures factorial design. Treatment condition (ice immersion or control), limb (right or left), and percentage (10, 25, or 40) of maximal voluntary isometric contraction (MVIC) were the independent variables. The dependent variables were the precision or variability (the standard deviation of mean isometric force) and the accuracy or targeting error (the root mean square error) of the isometric force for each percentage of MVIC. Subjects: Fifteen volunteer college students (8 men, 7 women; age = 22 ± 3 years; mass = 72 ± 21.9 kg; height = 183.4 ± 11.6 cm). Measurements: We measured sensation in the distal palmar aspect of the index finger and thumb. Sensation of pressure and 2-point discrimination were measured before treatment (baseline), after treatment (15 minutes of ice immersion or control), and at the completion of isometric testing (final). Variability (standard deviation of mean isometric force) of the submaximal isometric finger forces was measured by having the subjects exert a pinching force with the thumb and index finger for 30 seconds. Subjects performed the pinching task at the 3 submaximal levels of MVIC (10%, 25%, and 40%), with the order of trials assigned randomly. The subjects were given a target representing the submaximal percentage of MVIC and visual feedback of the force produced as they pinched the testing device. The force exerted

Globally exponential stability and periodic solutions of CNNS with variable coefficients and variable delays

International Nuclear Information System (INIS)

Liu Haifei; Wang Li

2006-01-01

In this Letter, by using the inequality method and the Lyapunov functional method, we analyze the globally exponential stability and the existence of periodic solutions of a class of cellular neutral networks with delays and variable coefficients. Some simple and new sufficient conditions ensuring the existence and uniqueness of globally exponential stability of periodic solutions for cellular neutral networks with variable coefficients and delays are obtained. In addition, one example is also worked out to illustrate our theory

Globally exponential stability and periodic solutions of CNNS with variable coefficients and variable delays

Energy Technology Data Exchange (ETDEWEB)

Liu Haifei [School of Management and Engineering, Nanjing University, Nanjing 210093 (China)]. E-mail: hfliu80@126.com; Wang Li [School of Management and Engineering, Nanjing University, Nanjing 210093 (China)

2006-09-15

In this Letter, by using the inequality method and the Lyapunov functional method, we analyze the globally exponential stability and the existence of periodic solutions of a class of cellular neutral networks with delays and variable coefficients. Some simple and new sufficient conditions ensuring the existence and uniqueness of globally exponential stability of periodic solutions for cellular neutral networks with variable coefficients and delays are obtained. In addition, one example is also worked out to illustrate our theory.

Explicit solutions of two nonlinear dispersive equations with variable coefficients

International Nuclear Information System (INIS)

Lai Shaoyong; Lv Xiumei; Wu Yonghong

2008-01-01

A mathematical technique based on an auxiliary equation and the symbolic computation system Matlab is developed to construct the exact solutions for a generalized Camassa-Holm equation and a nonlinear dispersive equation with variable coefficients. It is shown that the variable coefficients of the derivative terms in the equations cause the qualitative change in the physical structures of the solutions

Exact solutions to a nonlinear dispersive model with variable coefficients

International Nuclear Information System (INIS)

Yin Jun; Lai Shaoyong; Qing Yin

2009-01-01

A mathematical technique based on an auxiliary differential equation and the symbolic computation system Maple is employed to investigate a prototypical and nonlinear K(n, n) equation with variable coefficients. The exact solutions to the equation are constructed analytically under various circumstances. It is shown that the variable coefficients and the exponent appearing in the equation determine the quantitative change in the physical structures of the solutions.

Well/ill posedness for the Euler-Korteweg-Poisson system and related problems

Czech Academy of Sciences Publication Activity Database

Donatelli, D.; Feireisl, Eduard; Marcati, P.

2015-01-01

Roč. 40, č. 7 (2015), s. 1314-1335 ISSN 0360-5302 EU Projects: European Commission(XE) 320078 - MATHEF Institutional support: RVO:67985840 Keywords : convex integration * Euler-Korteweg system * quantum hydrodynamics Subject RIV: BA - General Mathematics Impact factor: 1.444, year: 2015 http://www.tandfonline.com/doi/abs/10.1080/03605302.2014.972517

Solution of heat equation with variable coefficient using derive

CSIR Research Space (South Africa)

Lebelo, RS

2008-09-01

Full Text Available In this paper, the method of approximating solutions of partial differential equations with variable coefficients is studied. This is done by considering heat flow through a one-dimensional model with variable cross-sections. Two cases...

Effect of Variable Manning Coefficients on Tsunami Inundation

Science.gov (United States)

Barberopoulou, A.; Rees, D.

2017-12-01

Numerical simulations are commonly used to help estimate tsunami hazard, improve evacuation plans, issue or cancel tsunami warnings, inform forecasting and hazard assessments and have therefore become an integral part of hazard mitigation among the tsunami community. Many numerical codes exist for simulating tsunamis, most of which have undergone extensive benchmarking and testing. Tsunami hazard or risk assessments employ these codes following a deterministic or probabilistic approach. Depending on the scope these studies may or may not consider uncertainty in the numerical simulations, the effects of tides, variable friction or estimate financial losses, none of which are necessarily trivial. Distributed manning coefficients, the roughness coefficients used in hydraulic modeling, are commonly used in simulating both riverine and pluvial flood events however, their use in tsunami hazard assessments is primarily part of limited scope studies and for the most part, not a standard practice. For this work, we investigate variations in manning coefficients and their effects on tsunami inundation extent, pattern and financial loss. To assign manning coefficients we use land use maps that come from the New Zealand Land Cover Database (LCDB) and more recent data from the Ministry of the Environment. More than 40 classes covering different types of land use are combined into major classes such as cropland, grassland and wetland representing common types of land use in New Zealand, each of which is assigned a unique manning coefficient. By utilizing different data sources for variable manning coefficients, we examine the impact of data sources and classification methodology on the accuracy of model outputs.

Isogeometric analysis of the isothermal Navier-Stokes-Korteweg equations

KAUST Repository

Gomez, Hector

2010-05-01

This paper is devoted to the numerical simulation of the Navier-Stokes-Korteweg equations, a phase-field model for water/water-vapor two-phase flows. We develop a numerical formulation based on isogeometric analysis that permits straightforward treatment of the higher-order partial-differential operator that represents capillarity. We introduce a new refinement methodology that desensitizes the numerical solution to the computational mesh and achieves mesh invariant solutions. Finally, we present several numerical examples in two and three dimensions that illustrate the effectiveness and robustness of our approach. © 2010 Elsevier B.V.

DETERMINATION EXPERIMENTALE DU COEFFICIENT DE DISPERSION D’UNE MATRICE DE SOL

Directory of Open Access Journals (Sweden)

R MAOUI

2005-06-01

Full Text Available La caractérisation des interactions entre une espèce chimique et une matrice de sol est généralement considérée dans les études des phénomènes de transport. Ce type de réaction est assujetti à l’estimation du coefficient de dispersion D. Ce coefficient représente le gradient de concentration de l’élément et le flux de transport ; il dépend de la distribution de la vitesse, de la porosité du milieu et des courants du liquide. Le présent travail décrit le procédé expérimental et la technique associée utilisés en vue de quantifier le coefficient D de deux traceurs radioactifs. Les résultats obtenus à l’échelle du laboratoire sont très satisfaisants et restent en conformité avec les résultats publiés

Efficiency analysis of straight fin with variable heat transfer coefficient and thermal conductivity

International Nuclear Information System (INIS)

Sadri, Somayyeh; Raveshi, Mohammad Reza; Amiri, Shayan

2012-01-01

In this study, one type of applicable analytical method, differential transformation method (DTM), is used to evaluate the efficiency and behavior of a straight fin with variable thermal conductivity and heat transfer coefficient. Fins are widely used to enhance heat transfer between primary surface and the environment in many industrial applications. The performance of such a surface is significantly affected by variable thermal conductivity and heat transfer coefficient, particularly for large temperature differences. General heat transfer equation related to the fin is derived and dimensionalized. The concept of differential transformation is briefly introduced, and then this method is employed to derive solutions of nonlinear equations. Results are evaluated for several cases such as: laminar film boiling or condensation, forced convection, laminar natural convection, turbulent natural convection, nucleate boiling, and radiation. The obtained results from DTM are compared with the numerical solution to verify the accuracy of the proposed method. The effects of design parameters on temperature and efficiency are evaluated by some figures. The major aim of the present study, which is exclusive for this article, is to find the effect of the modes of heat transfer on fin efficiency. It has been shown that for radiation heat transfer, thermal efficiency reaches its maximum value

Identification of cutting force coefficients in machining process considering cutter vibration

Science.gov (United States)

Yao, Qi; Luo, Ming; Zhang, Dinghua; Wu, Baohai

2018-03-01

Among current cutting force models, cutting force coefficients still are the foundation of predicting calculation combined with consideration of geometry engagement variation, equipment characteristics, material properties and so on. Attached with unimpeachable significance, the traditional and some novel identification methods of cutting force coefficient are still faced with trouble, including repeated onerous work, over ideal measuring condition, variation of value due to material divergence, interference from measuring units. To utilize the large amount of data from real manufacturing section, enlarge data sources and enrich cutting data base for former prediction task, a novel identification method is proposed by considering stiffness properties of the cutter-holder-spindle system in this paper. According to previously proposed studies, the direct result of cutter vibration is the form of dynamic undeformed chip thickness. This fluctuation is considered in two stages of this investigation. Firstly, a cutting force model combined with cutter vibration is established in detailed way. Then, on the foundation of modeling, a novel identification method is developed, in which the dynamic undeformed chip thickness could be obtained by using collected data. In a carefully designed experiment procedure, the reliability of model is validated by comparing predicted and measured results. Under different cutting condition and cutter stiffness, data is collected for the justification of identification method. The results showed divergence in calculated coefficients is acceptable confirming the possibility of accomplishing targets by applying this new method. In discussion, the potential directions of improvement are proposed.

Obliquely propagating cnoidal waves in a magnetized dusty plasma with variable dust charge

International Nuclear Information System (INIS)

Yadav, L. L.; Sayal, V. K.

2009-01-01

We have studied obliquely propagating dust-acoustic nonlinear periodic waves, namely, dust-acoustic cnoidal waves, in a magnetized dusty plasma consisting of electrons, ions, and dust grains with variable dust charge. Using reductive perturbation method and appropriate boundary conditions for nonlinear periodic waves, we have derived Korteweg-de Vries (KdV) equation for the plasma. It is found that the contribution to the dispersion due to the deviation from plasma approximation is dominant for small angles of obliqueness, while for large angles of obliqueness, the dispersion due to magnetic force becomes important. The cnoidal wave solution of the KdV equation is obtained. It is found that the frequency of the cnoidal wave depends on its amplitude. The effects of the magnetic field, the angle of obliqueness, the density of electrons, the dust-charge variation and the ion-temperature on the characteristics of the dust-acoustic cnoidal wave are also discussed. It is found that in the limiting case the cnoidal wave solution reduces to dust-acoustic soliton solution.

Drag coefficient Variability and Thermospheric models

Science.gov (United States)

Moe, Kenneth

Satellite drag coefficients depend upon a variety of factors: The shape of the satellite, its altitude, the eccentricity of its orbit, the temperature and mean molecular mass of the ambient atmosphere, and the time in the sunspot cycle. At altitudes where the mean free path of the atmospheric molecules is large compared to the dimensions of the satellite, the drag coefficients can be determined from the theory of free-molecule flow. The dependence on altitude is caused by the concentration of atomic oxygen which plays an important role by its ability to adsorb on the satellite surface and thereby affect the energy loss of molecules striking the surface. The eccentricity of the orbit determines the satellite velocity at perigee, and therefore the energy of the incident molecules relative to the energy of adsorption of atomic oxygen atoms on the surface. The temperature of the ambient atmosphere determines the extent to which the random thermal motion of the molecules influences the momentum transfer to the satellite. The time in the sunspot cycle affects the ambient temperature as well as the concentration of atomic oxygen at a particular altitude. Tables and graphs will be used to illustrate the variability of drag coefficients. Before there were any measurements of gas-surface interactions in orbit, Izakov and Cook independently made an excellent estimate that the drag coefficient of satellites of compact shape would be 2.2. That numerical value, independent of altitude, was used by Jacchia to construct his model from the early measurements of satellite drag. Consequently, there is an altitude dependent bias in the model. From the sparce orbital experiments that have been done, we know that the molecules which strike satellite surfaces rebound in a diffuse angular distribution with an energy loss given by the energy accommodation coefficient. As more evidence accumulates on the energy loss, more realistic drag coefficients are being calculated. These improved drag

Observation and Numerical Experiments for Drag Coefficient Under Typhoon Wind Forcing

Institute of Scientific and Technical Information of China (English)

CAO Huiqiu; ZHOU Liangming; LI Shuiqing; WANG Zhifeng

2017-01-01

This paper presents a study on drag coefficients under typhoon wind forcing based on observations and numerical experiments.The friction velocity and wind speed are measured at a marine observation platform in the South China Sea.Three typhoons:SOULIK (2013),TRAMI (2013) and FITOW (2013) are observed at a buoy station in the northeast sea area of Pingtan Island.A new parameterization is formulated for the wind drag coefficient as a function of wind speed.It is found that the drag coefficient (Ca) increases linearly with the slope of 0.083× 10-3 for wind speed less than 24 m s-1.To investigate the drag coefficient under higher wind conditions,three numerical experiments are implemented for these three typhoons using SWAN wave model.The wind input data are objective reanalysis datasets,which are assimilated with many sources and provided every six hours with the resolution of 0.125° ×0.125°.The numerical simulation results show a good agreement with wave observation data under typhoon wind forcing.The results indicate that the drag coefficient levels off with the linear slope of 0.012× 10-3 for higher wind speeds (less than 34 m s-1) and the new parameterization improvese the simulation accuracy compared with the Wu (1982) default used in SWAN.

A generalized fractional sub-equation method for fractional differential equations with variable coefficients

International Nuclear Information System (INIS)

Tang, Bo; He, Yinnian; Wei, Leilei; Zhang, Xindong

2012-01-01

In this Letter, a generalized fractional sub-equation method is proposed for solving fractional differential equations with variable coefficients. Being concise and straightforward, this method is applied to the space–time fractional Gardner equation with variable coefficients. As a result, many exact solutions are obtained including hyperbolic function solutions, trigonometric function solutions and rational solutions. It is shown that the considered method provides a very effective, convenient and powerful mathematical tool for solving many other fractional differential equations in mathematical physics. -- Highlights: ► Study of fractional differential equations with variable coefficients plays a role in applied physical sciences. ► It is shown that the proposed algorithm is effective for solving fractional differential equations with variable coefficients. ► The obtained solutions may give insight into many considerable physical processes.

Critical mass, rod values and reactivity coefficients for Rapsodie; Masse critique, valeur des barres et coefficients de reactivite de rapsodie

Energy Technology Data Exchange (ETDEWEB)

Stevens, L; Gourdon, J [Commissariat a l' Energie Atomique, Cadarache (France). Centre d' Etudes Nucleaires

1967-07-01

Besides a brief general description, the report contains a description and discussion of the aims, the methods used and the results of critical mass, rod worth and static reactivity coefficient measurements on the Rapsodie reactor. (authors) [French] Apres une breve description generale, le rapport decrit et discute le but, les methodes employees et les resultats des mesures de masse critique, de reactivite des barres et des coefficients de reactivite statiques du reacteur RAPSODIE. (auteurs)

Experimental measurement of fluid force coefficients for helical tube arrays in air cross flow

International Nuclear Information System (INIS)

Shen Shifang; Liu Reilan

1993-01-01

A helical coil steam generator is extensively used in the High Temperature Gas Cooled Reactor (HTGCR) and Sodium Cooled Reactor (SCR) nuclear power stations because of its compact structure, good heat-exchange, and small volume. The experimental model is established by the structure parameter of 200MW HTGCR. The fluid elastic instability of helical tube arrays in air cross flow is studied in this experiment, and the fluid force coefficients of helical tube arrays having the same notational direction of two adjacent layers in air cross flow are obtained. As compared to the fluid force coefficients of cylinder tube arrays, the fluid force coefficients of helical tube arrays are smaller in the low velocity area, and greater in the high velocity area. The experimental results help the study of the dynamic characteristics of helical tube arrays in air cross flow

Dynamics with infinitely many derivatives: variable coefficient equations

International Nuclear Information System (INIS)

Barnaby, Neil; Kamran, Niky

2008-01-01

Infinite order differential equations have come to play an increasingly significant role in theoretical physics. Field theories with infinitely many derivatives are ubiquitous in string field theory and have attracted interest recently also from cosmologists. Crucial to any application is a firm understanding of the mathematical structure of infinite order partial differential equations. In our previous work we developed a formalism to study the initial value problem for linear infinite order equations with constant coefficients. Our approach relied on the use of a contour integral representation for the functions under consideration. In many applications, including the study of cosmological perturbations in nonlocal inflation, one must solve linearized partial differential equations about some time-dependent background. This typically leads to variable coefficient equations, in which case the contour integral methods employed previously become inappropriate. In this paper we develop the theory of a particular class of linear infinite order partial differential equations with variable coefficients. Our formalism is particularly well suited to the types of equations that arise in nonlocal cosmological perturbation theory. As an example to illustrate our formalism we compute the leading corrections to the scalar field perturbations in p-adic inflation and show explicitly that these are small on large scales.

[Correlation coefficient-based classification method of hydrological dependence variability: With auto-regression model as example].

Science.gov (United States)

Zhao, Yu Xi; Xie, Ping; Sang, Yan Fang; Wu, Zi Yi

2018-04-01

Hydrological process evaluation is temporal dependent. Hydrological time series including dependence components do not meet the data consistency assumption for hydrological computation. Both of those factors cause great difficulty for water researches. Given the existence of hydrological dependence variability, we proposed a correlationcoefficient-based method for significance evaluation of hydrological dependence based on auto-regression model. By calculating the correlation coefficient between the original series and its dependence component and selecting reasonable thresholds of correlation coefficient, this method divided significance degree of dependence into no variability, weak variability, mid variability, strong variability, and drastic variability. By deducing the relationship between correlation coefficient and auto-correlation coefficient in each order of series, we found that the correlation coefficient was mainly determined by the magnitude of auto-correlation coefficient from the 1 order to p order, which clarified the theoretical basis of this method. With the first-order and second-order auto-regression models as examples, the reasonability of the deduced formula was verified through Monte-Carlo experiments to classify the relationship between correlation coefficient and auto-correlation coefficient. This method was used to analyze three observed hydrological time series. The results indicated the coexistence of stochastic and dependence characteristics in hydrological process.

Fast computation of the Maslov index for hyperbolic linear systems with periodic coefficients

International Nuclear Information System (INIS)

Chardard, F; Dias, F; Bridges, T J

2006-01-01

The Maslov index is a topological property of periodic orbits of finite-dimensional Hamiltonian systems that is widely used in semiclassical quantization, quantum chaology, stability of waves and classical mechanics. The Maslov index is determined from the analysis of a linear Hamiltonian system with periodic coefficients. In this paper, a numerical scheme is devised to compute the Maslov index for hyperbolic linear systems when the phase space has a low dimension. The idea is to compute on the exterior algebra of the ambient vector space, where the Lagrangian subspace representing the unstable subspace is reduced to a line. When the exterior algebra is projectified the Lagrangian subspace always forms a closed loop. The idea is illustrated by application to Hamiltonian systems on a phase space of dimension 4. The theory is used to compute the Maslov index for the spectral problem associated with periodic solutions of the fifth-order Korteweg de Vries equation

A low-dimensional tool for predicting force decomposition coefficients for varying inflow conditions

KAUST Repository

Ghommem, Mehdi

2013-01-01

We develop a low-dimensional tool to predict the effects of unsteadiness in the inflow on force coefficients acting on a circular cylinder using proper orthogonal decomposition (POD) modes from steady flow simulations. The approach is based on combining POD and linear stochastic estimator (LSE) techniques. We use POD to derive a reduced-order model (ROM) to reconstruct the velocity field. To overcome the difficulty of developing a ROM using Poisson\\'s equation, we relate the pressure field to the velocity field through a mapping function based on LSE. The use of this approach to derive force decomposition coefficients (FDCs) under unsteady mean flow from basis functions of the steady flow is illustrated. For both steady and unsteady cases, the final outcome is a representation of the lift and drag coefficients in terms of velocity and pressure temporal coefficients. Such a representation could serve as the basis for implementing control strategies or conducting uncertainty quantification. Copyright © 2013 Inderscience Enterprises Ltd.

A low-dimensional tool for predicting force decomposition coefficients for varying inflow conditions

KAUST Repository

Ghommem, Mehdi; Akhtar, Imran; Hajj, M. R.

2013-01-01

We develop a low-dimensional tool to predict the effects of unsteadiness in the inflow on force coefficients acting on a circular cylinder using proper orthogonal decomposition (POD) modes from steady flow simulations. The approach is based on combining POD and linear stochastic estimator (LSE) techniques. We use POD to derive a reduced-order model (ROM) to reconstruct the velocity field. To overcome the difficulty of developing a ROM using Poisson's equation, we relate the pressure field to the velocity field through a mapping function based on LSE. The use of this approach to derive force decomposition coefficients (FDCs) under unsteady mean flow from basis functions of the steady flow is illustrated. For both steady and unsteady cases, the final outcome is a representation of the lift and drag coefficients in terms of velocity and pressure temporal coefficients. Such a representation could serve as the basis for implementing control strategies or conducting uncertainty quantification. Copyright © 2013 Inderscience Enterprises Ltd.

A Coefficient of Association Between Categorical Variables With Partial or Tentative Ordering of Categories

DEFF Research Database (Denmark)

Siersma, Volkert; Kreiner, Svend

2009-01-01

Goodman and Kruskal's gamma coefficient measuring monotone association and its partial variants are useful for the analysis of multiway contingency tables containing ordinal variables. When the categories of a variable are only partly ordered and the variable is treated as a nominal variable......, information in the ordering of the categories and statistical power is lost. The authors suggest a (P)gamma measure that is the maximum of the ordinary gamma coefficients obtained by permuting the categories of nominal or partially ordered variables, while leaving the partial ordering intact. When...... of the (P)gamma coefficient are investigated in a simulation study and its use illustrated in two data sets....

[Hydrologic variability and sensitivity based on Hurst coefficient and Bartels statistic].

Science.gov (United States)

Lei, Xu; Xie, Ping; Wu, Zi Yi; Sang, Yan Fang; Zhao, Jiang Yan; Li, Bin Bin

2018-04-01

Due to the global climate change and frequent human activities in recent years, the pure stochastic components of hydrological sequence is mixed with one or several of the variation ingredients, including jump, trend, period and dependency. It is urgently needed to clarify which indices should be used to quantify the degree of their variability. In this study, we defined the hydrological variability based on Hurst coefficient and Bartels statistic, and used Monte Carlo statistical tests to test and analyze their sensitivity to different variants. When the hydrological sequence had jump or trend variation, both Hurst coefficient and Bartels statistic could reflect the variation, with the Hurst coefficient being more sensitive to weak jump or trend variation. When the sequence had period, only the Bartels statistic could detect the mutation of the sequence. When the sequence had a dependency, both the Hurst coefficient and the Bartels statistics could reflect the variation, with the latter could detect weaker dependent variations. For the four variations, both the Hurst variability and Bartels variability increased with the increases of variation range. Thus, they could be used to measure the variation intensity of the hydrological sequence. We analyzed the temperature series of different weather stations in the Lancang River basin. Results showed that the temperature of all stations showed the upward trend or jump, indicating that the entire basin had experienced warming in recent years and the temperature variability in the upper and lower reaches was much higher. This case study showed the practicability of the proposed method.

Measurement and calculation of dynamic coefficients in hydrodynamic bearings of gas films; Medicion y calculo de coeficientes dinamicos en cojinetes hidrodinamicos de peliculas de gas

Energy Technology Data Exchange (ETDEWEB)

Ruiz, Rafael O.; Di Liscia, Marcelo H.; Diaz, Sergio E. [Universidad Simon Bolivar, Sartendejas, Baruta (Venezuela)

2007-11-15

The identification of the dynamic coefficients in air bearings is fundamental for a suitable roto-dynamic analysis. The present paper shows the development of an algorithm that allows the direct obtaining of the dynamic coefficients in hydrodynamic air bearings as much of numerical form as experimental. The testing bench used consists of two magnetic bearings, which support the rotor in their ends and work as well as actuators allowing inducing controlled orbits in the rotor. The test bearing is located between the magnetic bearings. The dynamic forces generated in the air bearing are registered from three load cells. The algorithm was developed in a commercial code of graphical programming, through which the signals can be collected, controlled and processed. The nonlinear behavior of this type of bearings makes difficult the calculation of the dynamic coefficients, therefore the processing of the signals in frequencial space facilitates, in a certain way, its handling. On the other hand, the numerical model was compared with the experimental results obtaining acceptable approaches in magnitude as well as in behavior. The numerical dynamic coefficients calculation was realized solving the Reynolds differential equation for a compressible fluid in the thickness of the gas film, taking into consideration the fluid mass flow that is introduced, as well as the pressure loss suffered by the same in passing through the feeding orifices. The numerical methods utilized include the solution of the differential equation of Reynolds for finite differences, the calculation of the profile realizing successive iterations and the calculation of the hydrodynamics forces through the Simpson numerical integration. The numerical dynamic coefficients were found applying a minimum squared technique to the hydrodynamic stresses generated in simulating an orbit of the rotor at a determined frequency and velocity, allowing in this way the calculation of the synchronous and asynchronous

Variable-coefficient nonisospectral Toda lattice hierarchy and its

Indian Academy of Sciences (India)

In this paper, a hierarchy of nonisospectral equations with variable coefficients is derived from the compatibility condition of Toda spectral problem and its time evolution. In order to solve the derived Toda lattice hierarchy, the inverse scattering transformation is utilized. As a result, new and more general exact solutions are ...

A new population growth map with variable coefficients

International Nuclear Information System (INIS)

Jannussis, A.

1986-01-01

In the present paper it is investigated a simple population growth map with variable coefficients. Moreover, it is studied the new population map of the form xsub(j+1) = axsub(j) (1/(1 + bxsub(j)) -1/(1 + cxsub(j))), c not= b, j = 0, 1,..., which is transformed in an equivalent logistic map

Predição da força de reação do solo durante a corrida na água Prediction of ground reaction force during water immersion running

Directory of Open Access Journals (Sweden)

Alessandro Haupenthal

2010-09-01

Full Text Available Este estudo visou desenvolver um modelo para a predição da força de reação do solo na corrida subaquática. Participaram 20 sujeitos (9 homens e 11 mulheres, que realizaram corrida subaquática em dois níveis de imersão e três velocidades. Para cada sujeito foram coletadas seis passagens válidas em cada condição, com a utilização de uma plataforma subaquática de força. O modelo para predição da força foi construído por regressão linear múltipla. Foram consideradas variáveis dependentes a componente vertical e a componente ântero-posterior da força de reação do solo. As variáveis imersão, sexo, velocidade, massa corporal, densidade corporal e percentual de gordura foram consideradas independentes. Permaneceu no modelo final de regressão para a componente vertical a velocidade (pThis study aimed at developing a model to predict ground reaction force during deep-water running. A total of 20 subjects ((9 men, 11 women ran in water at two immersion levels and three different speeds. Each subject performed six valid trials in each condition, data being captured by an underwater force plate. The force prediction model was build by multiple linear regression. Dependent variables were the vertical and anteroposterior components of the ground reaction force; independent variables were runners' immersion, sex, speed, body mass, body density, and percentage of fat. At the final regression model for the vertical component, only speed remained (p<0.001, while for the anteroposterior component, speed, immersion, and body mass were maintained (all at p<0.001. The obtained model for the anteroposterior component of ground reaction force may be found satisfactory, as adjusted determination coefficient was 0.79. However, the prediction model for the vertical component cannot be recommended for prediction during deep-water running, since that coefficient was 0.18. It must be noted that the proposed prediction model applies to subjects

Classificação de coeficientes de variação na experimentação com nutrição de eqüinos Classification of the coefficient of variation in experimentation with equine nutrition

Directory of Open Access Journals (Sweden)

A.M.Q. Lana

2006-10-01

Full Text Available Foi realizada a classificação de coeficientes de variação dos coeficientes de digestibilidade da matéria seca, matéria orgânica, proteína bruta, fibras em detergente neutro e ácido, energia bruta, fibra bruta, celulose, hemicelulose, lignina, extrato etéreo e ganho de peso diário, com base em artigos científicos e teses em eqüinocultura. Os coeficientes de variação foram classificados em: baixo [(m+2DP]. Todas as respostas medidas apresentaram distribuição normal pelo teste Lilliefors. Quanto aos coeficientes de digestibilidade da fibra em detergente neutro e celulose, houve concordância entre a classificação proposta e a sugerida na literatura, sendo os mais discrepantes os coeficientes de digestibilidade da energia bruta e lignina. Desse modo, para cada variável analisada existe distribuição diferenciada dos coeficientes de variação, o que sugere a necessidade de classificação específica para as respostas medidas em nutrição de eqüinos.Coefficients of variation (CV distribution for several variables in equine nutrition were obtained. The data are from theses and published scientific papers in equine nutrition. The CV were classified as low [CV£(m-1sd]; medium [(m-1sd(m+2sd]. The Lilliefors test for all variables showed no discrepancy from normal distribution. The distributions obtained for coefficients of digestibility for cellulose and fibre in neutral and acid detergent, were close enough to the classification suggested in the literature. However, the distributions for coefficient of digestibility for gross energy and lignin, showed high discrepancies from this classification suggesting that trial precision should be evaluated according to the variable considered. There is a different distribution for coefficients of variation for each variable suggesting the need of specific classification for each characteristic in equine studies.

Study of performance of high speed turning using the volumetric dimension coefficient of resultant cutting force; Estudio del rendimiento del torneado de alta velocidad utilizando el coeficiente de dimension volumetrica de la fuerza de corte resultante

Energy Technology Data Exchange (ETDEWEB)

Hernandez-Gonzalez, L. W.; Perez-Rodriguez, R.; Zambrano-Robledo, P. C.; Siller-Carrillo, H. R.; Toscano-Reyes, H.

2013-07-01

This work deals with the experimental study of the resultant cutting force evolution of two coating carbide and a cermet inserts, during the dry turning of AISI 1045 steel with 400, 500 and 600 m/min cutting speeds. A new criterion for machinability study, the coefficient of volumetric dimension of cutting force, it is introduced. The investigation showed a better performance of cermet for moderate and intermediate cutting speeds, while at high cutting speed and final machining time, the three layers coated carbide achieved the best result. The factorial analysis of variance demonstrated a significant effect of machining time on the coefficient of volumetric dimension of resultant cutting force, while the material insert factor and their interaction, for intermediate cutting speed was just significant. (Author)

Energy decay of a variable-coefficient wave equation with nonlinear time-dependent localized damping

Directory of Open Access Journals (Sweden)

Jieqiong Wu

2015-09-01

Full Text Available We study the energy decay for the Cauchy problem of the wave equation with nonlinear time-dependent and space-dependent damping. The damping is localized in a bounded domain and near infinity, and the principal part of the wave equation has a variable-coefficient. We apply the multiplier method for variable-coefficient equations, and obtain an energy decay that depends on the property of the coefficient of the damping term.

Stationarity-conservation laws for fractional differential equations with variable coefficients

International Nuclear Information System (INIS)

Klimek, Malgorzata

2002-01-01

In this paper, we study linear fractional differential equations with variable coefficients. It is shown that, by assuming some conditions for the coefficients, the stationarity-conservation laws can be derived. The area where these are valid is restricted by the asymptotic properties of solutions of the respective equation. Applications of the proposed procedure include the fractional Fokker-Planck equation in (1+1)- and (d+1)-dimensional space and the fractional Klein-Kramers equation. (author)

Stationarity-conservation laws for fractional differential equations with variable coefficients

Energy Technology Data Exchange (ETDEWEB)

Klimek, Malgorzata [Institute of Mathematics and Computer Science, Technical University of Czestochowa, Czestochowa (Poland)

2002-08-09

In this paper, we study linear fractional differential equations with variable coefficients. It is shown that, by assuming some conditions for the coefficients, the stationarity-conservation laws can be derived. The area where these are valid is restricted by the asymptotic properties of solutions of the respective equation. Applications of the proposed procedure include the fractional Fokker-Planck equation in (1+1)- and (d+1)-dimensional space and the fractional Klein-Kramers equation. (author)

Improvements in force variability and structure from vision- to memory-guided submaximal isometric knee extension in subacute stroke.

Science.gov (United States)

Chow, John W; Stokic, Dobrivoje S

2018-03-01

We examined changes in variability, accuracy, frequency composition, and temporal regularity of force signal from vision-guided to memory-guided force-matching tasks in 17 subacute stroke and 17 age-matched healthy subjects. Subjects performed a unilateral isometric knee extension at 10, 30, and 50% of peak torque [maximum voluntary contraction (MVC)] for 10 s (3 trials each). Visual feedback was removed at the 5-s mark in the first two trials (feedback withdrawal), and 30 s after the second trial the subjects were asked to produce the target force without visual feedback (force recall). The coefficient of variation and constant error were used to quantify force variability and accuracy. Force structure was assessed by the median frequency, relative spectral power in the 0-3-Hz band, and sample entropy of the force signal. At 10% MVC, the force signal in subacute stroke subjects became steadier, more broadband, and temporally more irregular after the withdrawal of visual feedback, with progressively larger error at higher contraction levels. Also, the lack of modulation in the spectral frequency at higher force levels with visual feedback persisted in both the withdrawal and recall conditions. In terms of changes from the visual feedback condition, the feedback withdrawal produced a greater difference between the paretic, nonparetic, and control legs than the force recall. The overall results suggest improvements in force variability and structure from vision- to memory-guided force control in subacute stroke despite decreased accuracy. Different sensory-motor memory retrieval mechanisms seem to be involved in the feedback withdrawal and force recall conditions, which deserves further study. NEW & NOTEWORTHY We demonstrate that in the subacute phase of stroke, force signals during a low-level isometric knee extension become steadier, more broadband in spectral power, and more complex after removal of visual feedback. Larger force errors are produced when recalling

Optimized probabilistic calibration of safety coefficients in defect severity assessments; Dimensionnement probabiliste optimise des coefficients de securite dans les etudes de nocivite de defauts

Energy Technology Data Exchange (ETDEWEB)

Ardillon, E.; Pitner, P.; Barthelet, B. [Electricite de France, Direction des Etudes at Recherches, 92 - Clamart (France)

1997-12-31

The construction codes currently used in nuclear engineering recommend analysis methods and criteria consistent with a deterministic approach. Since 1993, in the framework of work related to the RSEM codes, the EFMT Branch has launched a probabilistic approach to establish a link between the current `deterministic` rules and failure risk assessments for the structures considered. There is an explicit link between the two approaches in the elementary strength/load case where the variables are Gaussian. This case provides the basis for the proposed methodology. In the complex case discussed in this paper, involving cracked piping with numerous non-Gaussian inputs, for a given failure mode, there is an implicit relationship between the target reliability level and the partial safety coefficients attached to each variable. The mean flaw size is the intermediate parameter used to make this link and allows flexibility in the choice of coefficients, thereby raising the question of optimized calibration. The approach is illustrated by the choice of coefficients based on the coordinates of the most probable failure point, resulting in a single set of coefficients adapted to the immediate vicinity of a given situation. In cases where the criterion must guarantee a given reliability level for a number of different operating situations, no set of coefficients can entirely guarantee the target reliability level. So, an optimized set of coefficients has to be selected, ensuring a reliability level as uniform as possible over the scope considered. This paper compares an initial coefficient proposal with a choice based on the design point method. The intermediate variable in assessing the reliability level is the mean flaw size, which would seem compatible with problems encountered under operating conditions. In addition, realistic risk assessment requires validation of the main variable distribution assumptions. We give an example of adjustment of distribution assumptions to

Weak nonlinear matter waves in a trapped two-component Bose-Einstein condensates

International Nuclear Information System (INIS)

Yong Wenmei; Xue Jukui

2008-01-01

The dynamics of the weak nonlinear matter solitary waves in two-component Bose-Einstein condensates (BEC) with cigar-shaped external potential are investigated analytically by a perturbation method. In the small amplitude limit, the two-components can be decoupled and the dynamics of solitary waves are governed by a variable-coefficient Korteweg-de Vries (KdV) equation. The reduction to the KdV equation may be useful to understand the dynamics of nonlinear matter waves in two-component BEC. The analytical expressions for the evolution of soliton, emitted radiation profiles and soliton oscillation frequency are also obtained

Improvement of the variable storage coefficient method with water surface gradient as a variable

Science.gov (United States)

The variable storage coefficient (VSC) method has been used for streamflow routing in continuous hydrological simulation models such as the Agricultural Policy/Environmental eXtender (APEX) and the Soil and Water Assessment Tool (SWAT) for more than 30 years. APEX operates on a daily time step and ...

Voluntary reduction of force variability via modulation of low-frequency oscillations.

Science.gov (United States)

Park, Seoung Hoon; Casamento-Moran, Agostina; Yacoubi, Basma; Christou, Evangelos A

2017-09-01

Visual feedback can influence the force output by changing the power in frequencies below 1 Hz. However, it remains unknown whether visual guidance can help an individual reduce force variability voluntarily. The purpose of this study, therefore, was to determine whether an individual can voluntarily reduce force variability during constant contractions with visual guidance, and whether this reduction is associated with a decrease in the power of low-frequency oscillations (0-1 Hz) in force and muscle activity. Twenty young adults (27.6 ± 3.4 years) matched a force target of 15% MVC (maximal voluntary contraction) with ankle dorsiflexion. Participants performed six visually unrestricted contractions, from which we selected the trial with the least variability. Following, participants performed six visually guided contractions and were encouraged to reduce their force variability within two guidelines (±1 SD of the least variable unrestricted trial). Participants decreased the SD of force by 45% (P  0.2). The decrease in force variability was associated with decreased low-frequency oscillations (0-1 Hz) in force (R 2  = 0.59), which was associated with decreased low-frequency oscillations in EMG bursts (R 2  = 0.35). The reduction in low-frequency oscillations in EMG burst was positively associated with power in the interference EMG from 35 to 60 Hz (R 2  = 0.47). In conclusion, voluntary reduction of force variability is associated with decreased low-frequency oscillations in EMG bursts and consequently force output. We provide novel evidence that visual guidance allows healthy young adults to reduce force variability voluntarily likely by adjusting the low-frequency oscillations in the neural drive.

Variability, correlation and path coefficient analysis of seedling traits ...

African Journals Online (AJOL)

Indirect selection is a useful means for improving yield in cotton crop. The objective of the present study was to determine the genetic variability, broad sense heritability, genetic advance and correlation among the six seedling traits and their direct and indirect effects on cotton yield by using path coefficient analysis.

An effective method for finding special solutions of nonlinear differential equations with variable coefficients

International Nuclear Information System (INIS)

Qin Maochang; Fan Guihong

2008-01-01

There are many interesting methods can be utilized to construct special solutions of nonlinear differential equations with constant coefficients. However, most of these methods are not applicable to nonlinear differential equations with variable coefficients. A new method is presented in this Letter, which can be used to find special solutions of nonlinear differential equations with variable coefficients. This method is based on seeking appropriate Bernoulli equation corresponding to the equation studied. Many well-known equations are chosen to illustrate the application of this method

Variability, correlation and path coefficient analysis of seedling traits ...

African Journals Online (AJOL)

use

2011-12-12

Dec 12, 2011 ... Indirect selection is a useful means for improving yield in cotton crop. The objective of the present study was to determine the genetic variability, broad sense heritability, genetic advance and correlation among the six seedling traits and their direct and indirect effects on cotton yield by using path coefficient ...

Theory of the diffusion coefficient of neutrons in a lattice containing cavities; Theorie du coefficient de diffusion des neutrons dans un reseau comportant des cavites

Energy Technology Data Exchange (ETDEWEB)

Benoist, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-01-15

In an previous publication, a simple and general formulation of the diffusion coefficient, which defines the mode of weighting of the mean free paths of the various media, in introducing the collision probabilities in each medium, was established. This expression is demonstrated again here through a more direct method, and the velocity is introduced; new terms are emphasised, the existence of which implies that the representation of the diffusion area as the mean square of the straight line distance from source to absorption is not correct in a lattice. However these terms are of small enough an order of magnitude to he treated as a correction. The general expression also shows the existence, for the radial coefficient, of the series of angular correlation terms, which is seen to converge very slowly for large channels. The term by term computation which was initiated in the first work was then interrupted and a global formulation, which emphasize a resemblance with the problem of the thermal utilisation factor, was adopted. An integral method, analogous to that use for the computation of this factor, gives the possibility to establish new and simple practical formulae, which require the use of a few basic functions only. These formulae are very accurate, as seen from the results of a variational method which was studied as a reference. Various correction effects are reviewed. Expressions which allow the exact treatment of fuel rod clusters are presented. The theory is confronted with various experimental results, and a new method of measuring the radial coefficient is proposed. (author) [French] Dans une publication anterieure, on a etablie une formulation simple et generale du coefficient de diffusion, qui definit le mode de ponderation des libres parcours des differents milieux constituants en faisant apparaitre les probabilites de collision dans chaque milieu. On redemontre ici cette expression d'une maniere plus directe, tout en introduisant la variable

Determination of blade-to-coolant heat-transfer coefficients on a forced-convection, water-cooled, single-stage turbine

Science.gov (United States)

Freche, John C; Schum, Eugene F

1951-01-01

Blade-to-coolant convective heat-transfer coefficients were obtained on a forced-convection water-cooled single-stage turbine over a large laminar flow range and over a portion of the transition range between laminar and turbulent flow. The convective coefficients were correlated by the general relation for forced-convection heat transfer with laminar flow. Natural-convection heat transfer was negligible for this turbine over the Grashof number range investigated. Comparison of turbine data with stationary tube data for the laminar flow of heated liquids showed good agreement. Calculated average midspan blade temperatures using theoretical gas-to-blade coefficients and blade-to-coolant coefficients from stationary-tube data resulted in close agreement with experimental data.

Determination of the friction coefficient via the force autocorrelation function. A molecular dynamics investigation for a dense Lennard-Jones fluid

International Nuclear Information System (INIS)

Vogelsang, R.; Hoheisel, C.

1987-01-01

For a large region of dense fluid states of a Lennard-Jones system, they have calculated the friction coefficient by the force autocorrelation function of a Brownian-type particle by molecular dynamics (MD). The time integral over the force autocorrelation function showed an interesting behavior and the expected plateau value when the mass of the Brownian particle was chosen to be about a factor of 100 larger than the mass of the fluid particle. Sufficient agreement was found for the friction coefficient calculated by this way and that obtained by calculations of the self-diffusion coefficient using the common relation between these coefficients. Furthermore, a modified friction coefficient was determined by integration of the force autocorrelation function up to the first maximum. This coefficient can successfully be used to derive a reasonable soft part of the friction coefficient necessary for the Rice-Allnatt approximation for the shear velocity and simple liquids

A novel drag force coefficient model for gas–water two-phase flows under different flow patterns

Energy Technology Data Exchange (ETDEWEB)

Shang, Zhi, E-mail: shangzhi@tsinghua.org.cn

2015-07-15

Graphical abstract: - Highlights: • A novel drag force coefficient model was established. • This model realized to cover different flow patterns for CFD. • Numerical simulations were performed under wide range flow regimes. • Validations were carried out through comparisons to experiments. - Abstract: A novel drag force coefficient model has been developed to study gas–water two-phase flows. In this drag force coefficient model, the terminal velocities were calculated through the revised drift flux model. The revised drift flux is different from the traditional drift flux model because the natural curve movement of the bubble was revised through considering the centrifugal force. Owing to the revisions, the revised drift flux model was to extend to 3D. Therefore it is suitable for CFD applications. In the revised drift flux model, the different flow patterns of the gas–water two-phase flows were able to be considered. This model innovatively realizes the drag force being able to cover different flow patterns of gas–water two-phase flows on bubbly flow, slug flow, churn flow, annular flow and mist flow. Through the comparisons of the numerical simulations to the experiments in vertical upward and downward pipe flows, this model was validated.

A fast collocation method for a variable-coefficient nonlocal diffusion model

Science.gov (United States)

Wang, Che; Wang, Hong

2017-02-01

We develop a fast collocation scheme for a variable-coefficient nonlocal diffusion model, for which a numerical discretization would yield a dense stiffness matrix. The development of the fast method is achieved by carefully handling the variable coefficients appearing inside the singular integral operator and exploiting the structure of the dense stiffness matrix. The resulting fast method reduces the computational work from O (N3) required by a commonly used direct solver to O (Nlog ⁡ N) per iteration and the memory requirement from O (N2) to O (N). Furthermore, the fast method reduces the computational work of assembling the stiffness matrix from O (N2) to O (N). Numerical results are presented to show the utility of the fast method.

Reactivity coefficients by perturbation theory; Calcul des coefficients de re activite par la theorie des perturbations; Koehffitsienty reaktivnosti, opredelennye pri pomoshchi teorii vozmushchenij; Determinacion, de coeficientes de reactividad con ayuda de la teoria de las perturbaciones

Energy Technology Data Exchange (ETDEWEB)

Webster, J W [International Atomic Energy Agency, Vienna (Austria)

1962-03-15

The development of the formulae of perturbation theory provides a good opportunity to use one of the principal devices of mathematical heuristics, i.e. proceeding by analogy from something that is simple to something that is more complicated. This paper: (a) Reviews the formulation of perturbation theory as a method of calculating reactivity coefficients; this consists mainly of developing the differential equation for the adjoint flux, as a continuous function of position and lethargy, by proceeding by analogy from the one-group differential equation for adjoint flux. (b) Presents an application of the two-group form of perturbation theory to a boiling-mercury-cooled fast-breeder reactor (MCBR). It is seen that the net Hg density coefficient of reactivity for the first-design-try for the MCBR is negative for some regions and positive for others. However, it is negative for regions of highest statistical weight and where the density change for a power change would be the greatest. The overall Hg density coefficient is thus negative, i.e. the void coefficient is positive-an unsafe condition. It can be easily seen from the two-group formulation what design changes had to be made to obtain a design which would have a negative void coefficient. It developed in subsequent investigations that there were such design changes that could be made and a design of the MCBR with a negative void coefficient was eventually achieved. (author) [French] La mise au points des formules de la theorie des perturbations fournit une bonne occasion d'employer en mathematiques une des principales regles de la methode heuristique, celle qui consiste a proceder par analogie du simple au complexe. L'auteur du memoire: a) Expose une methode permettant de calculer les coefficients de reactivite en utilisant les formules de la theorie des perturbations; en substance, cette methode consiste a developper l'equation differentielle relative au flux adjoint en fonction continue de la position et de la

Determination of aerodynamic damping and force coefficients of filleted twin cables in dry conditions through passive-dynamic wind tunnel tests

DEFF Research Database (Denmark)

Mattiello, E.; Eriksen, M. B.; Georgakis, Christos T.

/FORCE Technology Climatic Wind Tunnel facility. The measured aerodynamic damping of the twin-cable arrangement in dry conditions was compared to the values obtained from full-scale monitoring and from an analytical model using static force coefficients. The comparison revealed broad agreement in the investigated...... Re range, as did the force coefficients obtained from dynamic and static tests....

Theory of the diffusion coefficient of neutrons in a lattice containing cavities; Theorie du coefficient de diffusion des neutrons dans un reseau comportant des cavites

Energy Technology Data Exchange (ETDEWEB)

Benoist, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-01-15

In an previous publication, a simple and general formulation of the diffusion coefficient, which defines the mode of weighting of the mean free paths of the various media, in introducing the collision probabilities in each medium, was established. This expression is demonstrated again here through a more direct method, and the velocity is introduced; new terms are emphasised, the existence of which implies that the representation of the diffusion area as the mean square of the straight line distance from source to absorption is not correct in a lattice. However these terms are of small enough an order of magnitude to he treated as a correction. The general expression also shows the existence, for the radial coefficient, of the series of angular correlation terms, which is seen to converge very slowly for large channels. The term by term computation which was initiated in the first work was then interrupted and a global formulation, which emphasize a resemblance with the problem of the thermal utilisation factor, was adopted. An integral method, analogous to that use for the computation of this factor, gives the possibility to establish new and simple practical formulae, which require the use of a few basic functions only. These formulae are very accurate, as seen from the results of a variational method which was studied as a reference. Various correction effects are reviewed. Expressions which allow the exact treatment of fuel rod clusters are presented. The theory is confronted with various experimental results, and a new method of measuring the radial coefficient is proposed. (author) [French] Dans une publication anterieure, on a etablie une formulation simple et generale du coefficient de diffusion, qui definit le mode de ponderation des libres parcours des differents milieux constituants en faisant apparaitre les probabilites de collision dans chaque milieu. On redemontre ici cette expression d'une maniere plus directe, tout en introduisant la variable

A combination method of the theory and experiment in determination of cutting force coefficients in ball-end mill processes

Directory of Open Access Journals (Sweden)

Yung-Chou Kao

2015-10-01

Full Text Available In this paper, the cutting force calculation of ball-end mill processing was modeled mathematically. All derivations of cutting forces were directly based on the tangential, radial, and axial cutting force components. In the developed mathematical model of cutting forces, the relationship of average cutting force and the feed per flute was characterized as a linear function. The cutting force coefficient model was formulated by a function of average cutting force and other parameters such as cutter geometry, cutting conditions, and so on. An experimental method was proposed based on the stable milling condition to estimate the cutting force coefficients for ball-end mill. This method could be applied for each pair of tool and workpiece. The developed cutting force model has been successfully verified experimentally with very promising results.

Derivation of energy-based base shear force coefficient considering hysteretic behavior and P-delta effects

Science.gov (United States)

Ucar, Taner; Merter, Onur

2018-01-01

A modified energy-balance equation accounting for P-delta effects and hysteretic behavior of reinforced concrete members is derived. Reduced hysteretic properties of structural components due to combined stiffness and strength degradation and pinching effects, and hysteretic damping are taken into account in a simple manner by utilizing plastic energy and seismic input energy modification factors. Having a pre-selected yield mechanism, energy balance of structure in inelastic range is considered. P-delta effects are included in derived equation by adding the external work of gravity loads to the work of equivalent inertia forces and equating the total external work to the modified plastic energy. Earthquake energy input to multi degree of freedom (MDOF) system is approximated by using the modal energy-decomposition. Energy-based base shear coefficients are verified by means of both pushover analysis and nonlinear time history (NLTH) analysis of several RC frames having different number of stories. NLTH analyses of frames are performed by using the time histories of ten scaled ground motions compatible with elastic design acceleration spectrum and fulfilling duration/amplitude related requirements of Turkish Seismic Design Code. The observed correlation between energy-based base shear force coefficients and the average base shear force coefficients of NLTH analyses provides a reasonable confidence in estimation of nonlinear base shear force capacity of frames by using the derived equation.

The functional variable method for solving the fractional Korteweg ...

Indian Academy of Sciences (India)

The physical and engineering processes have been modelled by means of fractional ... very important role in various fields such as economics, chemistry, notably control the- .... In §3, the functional variable method is applied for finding exact.

The Effect of a Variable Disc Pad Friction Coefficient for the Mechanical Brake System of a Railway Vehicle

Science.gov (United States)

Lee, Nam-Jin; Kang, Chul-Goo

2015-01-01

A brake hardware-in-the-loop simulation (HILS) system for a railway vehicle is widely applied to estimate and validate braking performance in research studies and field tests. When we develop a simulation model for a full vehicle system, the characteristics of all components are generally properly simplified based on the understanding of each component’s purpose and interaction with other components. The friction coefficient between the brake disc and the pad used in simulations has been conventionally considered constant, and the effect of a variable friction coefficient is ignored with the assumption that the variability affects the performance of the vehicle braking very little. However, the friction coefficient of a disc pad changes significantly within a range due to environmental conditions, and thus, the friction coefficient can affect the performance of the brakes considerably, especially on the wheel slide. In this paper, we apply a variable friction coefficient and analyzed the effects of the variable friction coefficient on a mechanical brake system of a railway vehicle. We introduce a mathematical formula for the variable friction coefficient in which the variable friction is represented by two variables and five parameters. The proposed formula is applied to real-time simulations using a brake HILS system, and the effectiveness of the formula is verified experimentally by testing the mechanical braking performance of the brake HILS system. PMID:26267883

The Effect of a Variable Disc Pad Friction Coefficient for the Mechanical Brake System of a Railway Vehicle.

Science.gov (United States)

Lee, Nam-Jin; Kang, Chul-Goo

2015-01-01

A brake hardware-in-the-loop simulation (HILS) system for a railway vehicle is widely applied to estimate and validate braking performance in research studies and field tests. When we develop a simulation model for a full vehicle system, the characteristics of all components are generally properly simplified based on the understanding of each component's purpose and interaction with other components. The friction coefficient between the brake disc and the pad used in simulations has been conventionally considered constant, and the effect of a variable friction coefficient is ignored with the assumption that the variability affects the performance of the vehicle braking very little. However, the friction coefficient of a disc pad changes significantly within a range due to environmental conditions, and thus, the friction coefficient can affect the performance of the brakes considerably, especially on the wheel slide. In this paper, we apply a variable friction coefficient and analyzed the effects of the variable friction coefficient on a mechanical brake system of a railway vehicle. We introduce a mathematical formula for the variable friction coefficient in which the variable friction is represented by two variables and five parameters. The proposed formula is applied to real-time simulations using a brake HILS system, and the effectiveness of the formula is verified experimentally by testing the mechanical braking performance of the brake HILS system.

Forced convection of ammonia. 2. part.: gaseous ammonia - very high wall temperatures (1000 to 3000 K); Convection forcee de l'ammoniac. 2. partie: ammoniac gazeux - cas de tres hautes temperatures de paroi (1000 a 3000{sup 0} K)

Energy Technology Data Exchange (ETDEWEB)

Perroud, P; Rebiere, J; Strittmatter, R [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

Heat transfer coefficients and pressure drop of gaseous ammonia in forced convection are experimentally determined. The fluid flows (mass flow rate 0.6 to 2.4 g/s) in a long tungsten tube (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm) electrically heated. The temperature of the wall reaches 3000 deg. K and the fluid 2500 deg. K; maximum heat flux 530 w/cm{sup 2}. Ammonia is completely dissociated and the power necessary for dissociation reaches 30 per cent of the total power exchanged. Inlet pressure varies between 6 and 16 bars and the maximum pressure drop in the tube reaches 15 bars. Two regimes of dissociation have been shown: catalytic and homogeneous and the variation of dissociation along the length of the tube is studied. The measured heat transfer coefficients may be about 10 times these calculated by the means of classical formulae. A correlation of experimental results using enthalpy as a driving force for heat transmission is presented. Pressure drops may be calculated by the means of a classical friction factor. (authors) [French] On determine experimentalement les coefficients d'echange thermique et les pertes de charge de l'ammoniac gazeux en convection forcee. Le fluide circule avec un debit en masse compris entre 0.6 et 2.4 g/s (G = 10 a 40 g/cm{sup 2}.s) dans un tube long en tungstene (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm), chauffe electriquement. La temperature de paroi atteint 3000 deg. K, celle du fluide 2500 deg. K et le flux de chaleur maximal est de 530 W/cm{sup 2}. L'ammoniac se dissocie completement, la puissance correspondant a la dissociation atteint 30 pour cent de la puissance totale echangee. La pression d'entree varie entre 6 et 16 bars et la chute de pression maximale dans le canal est de 15 bars. On distingue deux regimes de dissociation, catalytique et homogene, et on etudie la variation du taux de dissociation en fonction de la longueur du tube. Les coefficients d'echange thermique mesures peuvent etre environ 10

Estudio del rendimiento del torneado de alta velocidad utilizando el coeficiente de dimensión volumétrica de la fuerza de corte resultante

Directory of Open Access Journals (Sweden)

Hernández-González, L. W.

2013-08-01

Full Text Available This work deals with the experimental study of the resultant cutting force evolution of two coating carbide and a cermet inserts, during the dry turning of AISI 1045 steel with 400, 500 and 600 m/min cutting speeds. A new criterion for machinability study, the coefficient of volumetric dimension of cutting force, it is introduced. The investigation showed a better performance of cermet for moderate and intermediate cutting speeds, while at high cutting speed and final machining time, the three layers coated carbide achieved the best result. The factorial analysis of variance demonstrated a significant effect of machining time on the coefficient of volumetric dimension of resultant cutting force, while the material insert factor and their interaction, for intermediate cutting speed was just significant.En este trabajo se aborda el estudio experimental de la evolución de la fuerza de corte resultante de dos insertos de carburo recubierto y un cermet, durante el torneado en seco del acero AISI 1045 con velocidades de corte de 400, 500 y 600 m/min . Se introduce, además, un nuevo criterio para el estudio del rendimiento de las operaciones de mecanizado: el coeficiente de dimensión volumétrica de la fuerza de corte. La investigación mostró un mejor rendimiento del cermet para la velocidad de corte moderada e intermedia, mientras que para la alta velocidad de corte y tiempo final de mecanizado, el mejor resultado fue para el carburo recubierto con tres capas. El análisis de varianza factorial demostró un efecto significativo del tiempo de mecanizado en el coeficiente de dimensión volumétrica de la fuerza de corte resultante, mientras que la variable material del inserto y su interacción, fue solo significativa para la velocidad de corte intermedia.

Transverse stability of Kawahara solitons

DEFF Research Database (Denmark)

Karpman, V.I.

1993-01-01

The transverse stability of the planar solitons described by the fifth-order Korteweg-de Vries equation (Kawahara solitons) is studied. It is shown that the planar solitons are unstable with respect to bending if the coefficient at the fifth-derivative term is positive and stable if it is negative...

A higher-order nonlinear Schrödinger equation with variable coefficients

OpenAIRE

Carvajal, X.; Linares, F.

2003-01-01

We study the initial value problem (IVP) associated to a higher-order nonlinear Schrödinger equation with variable coefficients. Under some regularity on its coefficients we establish local well-posedness for the IVP for data in $H^s(\\mathbb R)$, $s\\ge1/4$, improving previous results [22]. The main ingredient in our proof is an estimate of the maximal function associated to the linear solution similar to the sharp one obtained for linear solutions of the Schrödinger and K...

Binary Bell polynomial application in generalized (2+1)-dimensional KdV equation with variable coefficients

International Nuclear Information System (INIS)

Zhang Yi; Wei Wei-Wei; Cheng Teng-Fei; Song Yang

2011-01-01

In this paper, we apply the binary Bell polynomial approach to high-dimensional variable-coefficient nonlinear evolution equations. Taking the generalized (2+1)-dimensional KdV equation with variable coefficients as an illustrative example, the bilinear formulism, the bilinear Bäcklund transformation and the Lax pair are obtained in a quick and natural manner. Moreover, the infinite conservation laws are also derived. (general)

A comparison of two methods of measuring static coefficient of friction at low normal forces: a pilot study.

Science.gov (United States)

Seo, Na Jin; Armstrong, Thomas J; Drinkaus, Philip

2009-01-01

This study compares two methods for estimating static friction coefficients for skin. In the first method, referred to as the 'tilt method', a hand supporting a flat object is tilted until the object slides. The friction coefficient is estimated as the tangent of the angle of the object at the slip. The second method estimates the friction coefficient as the pull force required to begin moving a flat object over the surface of the hand, divided by object weight. Both methods were used to estimate friction coefficients for 12 subjects and three materials (cardboard, aluminium, rubber) against a flat hand and against fingertips. No differences in static friction coefficients were found between the two methods, except for that of rubber, where friction coefficient was 11% greater for the tilt method. As with previous studies, the friction coefficients varied with contact force and contact area. Static friction coefficient data are needed for analysis and design of objects that are grasped or manipulated with the hand. The tilt method described in this study can easily be used by ergonomic practitioners to estimate static friction coefficients in the field in a timely manner.

Design and implementation of a versatile and variable-frequency piezoelectric coefficient measurement system.

Science.gov (United States)

Wu, J S; Huang, Y K; Wu, F L; Lin, D Y

2012-08-01

We present a simple but versatile piezoelectric coefficient measurement system, which can measure the longitudinal and transverse piezoelectric coefficients in the pressing and bending modes, respectively, at different applied forces and a wide range of frequencies. The functionality of this measurement system has been demonstrated on three samples, including a PbZr(0.52)Ti(0.48)O(3) (PZT) piezoelectric ceramic bulk, a ZnO thin film, and a laminated piezoelectric film sensor. The static longitudinal piezoelectric coefficients of the PZT bulk and the ZnO film are estimated to be around 210 and 8.1 pC/N, respectively. The static transverse piezoelectric coefficients of the ZnO film and the piezoelectric film sensor are determined to be, respectively, -0.284 and -0.031 C/m(2).

The diffusion coefficient as a function of energy for usual moderators; Le coefficient de diffusion en fonction de l'energie des thermaliseurs usuels

Energy Technology Data Exchange (ETDEWEB)

Cadilhac, M; Livolant, M; Pillard, D; Soule, J -L [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

1966-07-01

After a review of the definition of the energy function to be taken for the diffusion coefficient used in calculations of reactor cells, in the elementary theory of diffusion, various possible approximations of this function are given. These approximations are shown to be accurate enough for practical uses. Methods for the direct calculations of these approximations for the currently used 'normal' models (methods avoiding the calculation of differential cross sections) are described; these methods are applied to several usual moderators at various temperatures according to different models. (authors) [French] On rappelle la definition de la fonction de l'energie que l'on doit prendre pour le coefficient de diffusion dans les calculs de cellule de reacteur en theorie elementaire de la diffusion. Puis on indique diverses approximations possibles de cette fonction. On montre que ces approximations ont en pratique une precision suffisante. Enfin on decrit des methodes de calcul direct de ces approximations pour les modeles 'normaux' couramment employes (methodes qui evitent d'avoir a calculer les sections efficaces differentielles), et on les applique a plusieurs thermaliseurs usuels a differentes temperatures (selon differents modeles). (auteurs)

ESTIMACIÓN DE VARIABLES DE OPERACIÓN DE UN BIORREACTOR CON CÉLULAS DE Azadirachta indica A. Juss ESTIMATION OF OPERATION VARIABLES OF A BIOREACTOR WITH Azadirachta indica A. Juss. CELLS

Directory of Open Access Journals (Sweden)

Walter Muñoz Cruz

2006-12-01

Full Text Available Se estudiaron las variables de operación de un biorreactor de tanque agitado para el cultivo de células en suspensión de Azadirachta indica A. Juss. Se utilizó carboximetilcelulosa, CMC 0,7 % p/v, para estimar el coeficiente de transferencia de oxígeno, kLa, entre 120 - 400 rpm y entre 0,05 - 0,6 vvm, obteniéndose valores de 0,5 - 8,0 h-1. El kLa para suspensiones de A. indica en erlenmeyers fue de 0,6 - 1,2 h-1. Con los resultados anteriores se definieron las condiciones de operación del biorreactor y se evaluó el crecimiento de células de A. indica a 200 rpm y 0,2 vvm de aire, alcanzando 9,2 g cel secas/l. El crecimiento celular no fue limitado por el suministro de oxígeno. Los tamaños de aglomerados celulares cultivados en erlenmeyers con bafles agitados magnéticamente y en biorreactor fueron similares, pero menores que los obtenidos en erlemeyers con agitación orbital. El presente estudio establece parámetros para la operación de biorreactores con A. indica y confirma que los medios con CMC pueden utilizarse para estimar variables operacionales en biorreactores.Operation variables of a stirred tank bioreactor were studied in order to culture cell suspension of Azadirachta indica A. Juss Carboximethylcelulose, CMC 0,7 % w/v, was used to estimate the coefficient of oxygen transfer, kLa, between 120 - 400 rpm and 0,05 - 0,6 vvm, obtaining values of 0,5 - 8,0 h-1. The kLa for suspension cultures of A. indica in erlenmeyers was 0,6 - 1,2 h-1. Based upon the previous results, the operation conditions of the bioreactor were defined and cell growth of A. indica was evaluated at 200 rpm and 0,2 vvm of air, reaching 9,2 g dry cell/l. Celular growth was not limited by dissolved oxygen. The sizes of cell agglomerates magnetically stirred in erlemeyers with bafles and in the bioreactor were similar, but smaller that those obtained in erlenmeyers with orbital agitation. The present study establishes parameters for operation of bioreactors

Forced convection of ammonia. 2. part.: gaseous ammonia - very high wall temperatures (1000 to 3000 K); Convection forcee de l'ammoniac. 2. partie: ammoniac gazeux - cas de tres hautes temperatures de paroi (1000 a 3000{sup 0} K)

Energy Technology Data Exchange (ETDEWEB)

Perroud, P.; Rebiere, J.; Strittmatter, R. [Commissariat a l' Energie Atomique, Grenoble (France). Centre d' Etudes Nucleaires

1969-07-01

Heat transfer coefficients and pressure drop of gaseous ammonia in forced convection are experimentally determined. The fluid flows (mass flow rate 0.6 to 2.4 g/s) in a long tungsten tube (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm) electrically heated. The temperature of the wall reaches 3000 deg. K and the fluid 2500 deg. K; maximum heat flux 530 w/cm{sup 2}. Ammonia is completely dissociated and the power necessary for dissociation reaches 30 per cent of the total power exchanged. Inlet pressure varies between 6 and 16 bars and the maximum pressure drop in the tube reaches 15 bars. Two regimes of dissociation have been shown: catalytic and homogeneous and the variation of dissociation along the length of the tube is studied. The measured heat transfer coefficients may be about 10 times these calculated by the means of classical formulae. A correlation of experimental results using enthalpy as a driving force for heat transmission is presented. Pressure drops may be calculated by the means of a classical friction factor. (authors) [French] On determine experimentalement les coefficients d'echange thermique et les pertes de charge de l'ammoniac gazeux en convection forcee. Le fluide circule avec un debit en masse compris entre 0.6 et 2.4 g/s (G = 10 a 40 g/cm{sup 2}.s) dans un tube long en tungstene (d{sub i} = 2.8 mm, d{sub e} = 5.1 mm, L = 700 mm), chauffe electriquement. La temperature de paroi atteint 3000 deg. K, celle du fluide 2500 deg. K et le flux de chaleur maximal est de 530 W/cm{sup 2}. L'ammoniac se dissocie completement, la puissance correspondant a la dissociation atteint 30 pour cent de la puissance totale echangee. La pression d'entree varie entre 6 et 16 bars et la chute de pression maximale dans le canal est de 15 bars. On distingue deux regimes de dissociation, catalytique et homogene, et on etudie la variation du taux de dissociation en fonction de la longueur du tube. Les coefficients d'echange thermique mesures

Statistical Analysis for Multisite Trials Using Instrumental Variables with Random Coefficients

Science.gov (United States)

Raudenbush, Stephen W.; Reardon, Sean F.; Nomi, Takako

2012-01-01

Multisite trials can clarify the average impact of a new program and the heterogeneity of impacts across sites. Unfortunately, in many applications, compliance with treatment assignment is imperfect. For these applications, we propose an instrumental variable (IV) model with person-specific and site-specific random coefficients. Site-specific IV…

Intraclass Correlation Coefficients in Hierarchical Designs: Evaluation Using Latent Variable Modeling

Science.gov (United States)

Raykov, Tenko

2011-01-01

Interval estimation of intraclass correlation coefficients in hierarchical designs is discussed within a latent variable modeling framework. A method accomplishing this aim is outlined, which is applicable in two-level studies where participants (or generally lower-order units) are clustered within higher-order units. The procedure can also be…

Postural steadiness and ankle force variability in peripheral neuropathy

Science.gov (United States)

Paxton, Roger J.; Feldman-Kothe, Caitlin; Trabert, Megan K.; Hitchcock, Leah N.; Reiser, Raoul F.; Tracy, Brian L.

2015-01-01

Introduction The purpose was to determine the effect of peripheral neuropathy (PN) on motor output variability for ankle muscles of older adults, and the relation between ankle motor variability and postural stability in PN patients. Methods Older adults with (O-PN) and without PN (O), and young adults (Y) underwent assessment of standing postural stability and ankle muscle force steadiness. Results O-PN displayed impaired ankle muscle force control and postural stability compared with O and Y groups. For O-PN, the amplitude of plantarflexor force fluctuations was moderately correlated with postural stability under no-vision conditions (r = 0.54, P = 0.01). Discussion The correlation of variations in ankle force with postural stability in PN suggests a contribution of ankle muscle dyscontrol to the postural instability that impacts physical function for older adults with PN. PMID:26284897

Dark solitons for a variable-coefficient higher-order nonlinear Schrödinger equation in the inhomogeneous optical fiber

Science.gov (United States)

Sun, Yan; Tian, Bo; Wu, Xiao-Yu; Liu, Lei; Yuan, Yu-Qiang

2017-04-01

Under investigation in this paper is a variable-coefficient higher-order nonlinear Schrödinger equation, which has certain applications in the inhomogeneous optical fiber communication. Through the Hirota method, bilinear forms, dark one- and two-soliton solutions for such an equation are obtained. We graphically study the solitons with d1(z), d2(z) and d3(z), which represent the variable coefficients of the group-velocity dispersion, third-order dispersion and fourth-order dispersion, respectively. With the different choices of the variable coefficients, we obtain the parabolic, periodic and V-shaped dark solitons. Head-on and overtaking collisions are depicted via the dark two soliton solutions. Velocities of the dark solitons are linearly related to d1(z), d2(z) and d3(z), respectively, while the amplitudes of the dark solitons are not related to such variable coefficients.

INFLUENCE DE L’EPAISSEUR SUR LE COEFFICIENT DE DILATATION THERMIQUE DE LA TOLE ALMGSI

Directory of Open Access Journals (Sweden)

S SAADALLAH

2014-12-01

Full Text Available L’objectif de cet article est l’étude de l’influence de l’épaisseur sur le coefficient de dilatation thermique de la tôle AlMgSi. Les résultats obtenus dépendent fortement de l’épaisseur. Les courbes dilatométriques varient d’une direction à une autre. Il y a présence d’une anisotropie dont l’intensité dépend de l’épaisseur et de la direction de mesure. L’échantillon prélevé selon la direction Y et dont l’épaisseur est de 1.15mm présente une dilatation faible devant les autres. Ce comportement le rend intéressant dans le domaine industriel.

The role of remote wind forcing in the subinertial current variability in the central and northern parts of the South Brazil Bight

Science.gov (United States)

Dottori, Marcelo; Castro, Belmiro Mendes

2018-05-01

Data analysis of continental shelf currents and coastal sea level, together with the application of a semi-analytical model, are used to estimate the importance of remote wind forcing on the subinertial variability of the current in the central and northern areas of the South Brazil Bight. Results from both the data analysis and from the semi-analytical model are robust in showing subinertial variability that propagates along-shelf leaving the coast to the left in accordance with theoretical studies of Continental Shelf Waves (CSW). Both the subinertial variability observed in along-shelf currents and sea level oscillations present different propagation speeds for the narrow northern part of the SBB ( 6-7 m/s) and the wide central SBB region ( 11 m/s), those estimates being in agreement with the modeled CSW propagation speed. On the inner and middle shelf, observed along-shelf subinertial currents show higher correlation coefficients with the winds located southward and earlier in time than with the local wind at the current meter mooring position and at the time of measurement. The inclusion of the remote (located southwestward) wind forcing improves the prediction of the subinertial currents when compared to the currents forced only by the local wind, since the along-shelf-modeled currents present correlation coefficients with observed along-shelf currents up to 20% higher on the inner and middle shelf when the remote wind is included. For most of the outer shelf, on the other hand, this is not observed since usually, the correlation between the currents and the synoptic winds is not statistically significant.

A Coupled Korteweg-de Vries System and Mass Exchanges among Solitons

DEFF Research Database (Denmark)

Miller, P. D.; Christiansen, Peter Leth

2000-01-01

V and the solution of a linear equation with nonconstant coefficients. The coupled KdV system may be viewed as a phenomenological model for the sharing of mass among interacting solitons of the (one-component) KdV equation. Results for the scattering theory of solutions of the nonconstant coefficient linear equation...

Multi-symplectic variational integrators for nonlinear Schrödinger equations with variable coefficients

International Nuclear Information System (INIS)

Liao Cui-Cui; Cui Jin-Chao; Liang Jiu-Zhen; Ding Xiao-Hua

2016-01-01

In this paper, we propose a variational integrator for nonlinear Schrödinger equations with variable coefficients. It is shown that our variational integrator is naturally multi-symplectic. The discrete multi-symplectic structure of the integrator is presented by a multi-symplectic form formula that can be derived from the discrete Lagrangian boundary function. As two examples of nonlinear Schrödinger equations with variable coefficients, cubic nonlinear Schrödinger equations and Gross–Pitaevskii equations are extensively studied by the proposed integrator. Our numerical simulations demonstrate that the integrator is capable of preserving the mass, momentum, and energy conservation during time evolutions. Convergence tests are presented to verify that our integrator has second-order accuracy both in time and space. (paper)

Visualización de funciones de dos variables

Directory of Open Access Journals (Sweden)

Busto Caballero, Ana Isabel

2004-01-01

Full Text Available Los alumnos de la licenciatura en Administración y Dirección de Empresas tienen dentro de los contenidos del programa de la asignatura “Matemáticas Empresariales I”, el estudio de las funciones de varias variables: continuidad, derivabilidad, diferenciabilidad y optimización. Este tema es complicado de visualizar con tiza y pizarra, a diferencia del mismo estudio realizado para funciones reales de variable real. El objetivo de este trabajo es presentar una metodología para llevar el ordenador a clase y visualizar las gráficas de las funciones de dos variables y sus características específicas, que faciliten la comprensión del tema por parte del alumno, y conseguir que los resultados obtenidos analíticamente tengan un aspecto gráfico e intuitivo.

The possibility of determining the activity coefficients of individual ions from acid-base titration data

Science.gov (United States)

Jano, I.; Hardcastle, J. E.

1998-07-01

A method is described for obtaining the activity coefficients of individual ions from experimental titration data. For this purpose, a general polyprotic acid-base-titration-curve equation is derived. The equation allows obtaining the dissociation equilibrium constants of the acid and the ratio of the activity coefficient of each ion to the activity coefficient of the undissociated acid directly from the titration data. Results obtained are compared with coefficients calculated using Debye-Hückel equation. A general equation relating the ionic strength to the pH of the titration medium is also established. Une méthode pour l'obtention des coefficients d'activité des ions individuels à partir des données expérimentales de titrage est établie. À ce but, une équation générale est dérivée pour représenter la courbe de titrage d'un acide avec une base. Cette équation permet d'obtenir les constants d'équilibre de dissociation de l'acide et le rapport de coefficient d'activité de chaque ion au coefficient d'activité de l'acide non-dissocié à partir des données de titrage. Les résultats ainsi obtenus sont comparés avec les coefficients calculés à l'aide de l'équation de Debye-Hückel. Une équation liant la force ionique au pH du milieu est établie aussi.

Oscillation Criteria of First Order Neutral Delay Differential Equations with Variable Coefficients

Directory of Open Access Journals (Sweden)

Fatima N. Ahmed

2013-01-01

Full Text Available Some new oscillation criteria are given for first order neutral delay differential equations with variable coefficients. Our results generalize and extend some of the well-known results in the literature. Some examples are considered to illustrate the main results.

Stochastically-forced Decadal Variability in Australian Rainfall

Science.gov (United States)

Taschetto, A.

2015-12-01

Iconic Australian dry and wet periods were driven by anomalous conditions in the tropical oceans, such as the worst short-term drought in the southeast in 1982 associated with the strong El Niño and the widespread "Big Wet" in 1974 linked with a La Niña event. The association with oceanic conditions makes droughts predictable to some extent. However, prediction can be difficult when there is no clear external forcing such as El Niños. Can dry spells be triggered and maintained with no ocean memory? In this study, we investigate the potential role of internal multi-century atmospheric variability in controlling the frequency, duration and intensity of long-term dry and wet spells over Australia. Two multi-century-scale simulations were performed with the NCAR CESM: (1) a fully-coupled simulation (CPLD) and (2) an atmospheric simulation forced by a seasonal SST climatology derived from the coupled experiment (ACGM). Results reveal that droughts and wet spells can indeed be generated by internal variability of the atmosphere. Those internally generated events are less severe than those forced by oceanic variability, however the duration of dry and wet spells longer than 3 years is comparable with and without the ocean memory. Large-scale ocean modes of variability seem to play an important role in producing continental-scale rainfall impacts over Australia. While the Pacific Decadal Oscillation plays an important role in generating droughts in the fully coupled model, perturbations of monsoonal winds seem to be the main trigger of dry spells in the AGCM case. Droughts in the mid-latitude regions such as Tasmania can be driven by perturbations in the Southern Annular Mode, not necessarily linked to oceanic conditions even in the fully-coupled model. The mechanisms behind internally-driven mega-droughts and mega-wets will be discussed.

Direct calculation of 1-octanol-water partition coefficients from adaptive biasing force molecular dynamics simulations.

Science.gov (United States)

Bhatnagar, Navendu; Kamath, Ganesh; Chelst, Issac; Potoff, Jeffrey J

2012-07-07

The 1-octanol-water partition coefficient log K(ow) of a solute is a key parameter used in the prediction of a wide variety of complex phenomena such as drug availability and bioaccumulation potential of trace contaminants. In this work, adaptive biasing force molecular dynamics simulations are used to determine absolute free energies of hydration, solvation, and 1-octanol-water partition coefficients for n-alkanes from methane to octane. Two approaches are evaluated; the direct transfer of the solute from 1-octanol to water phase, and separate transfers of the solute from the water or 1-octanol phase to vacuum, with both methods yielding statistically indistinguishable results. Calculations performed with the TIP4P and SPC∕E water models and the TraPPE united-atom force field for n-alkanes show that the choice of water model has a negligible effect on predicted free energies of transfer and partition coefficients for n-alkanes. A comparison of calculations using wet and dry octanol phases shows that the predictions for log K(ow) using wet octanol are 0.2-0.4 log units lower than for dry octanol, although this is within the statistical uncertainty of the calculation.

Visuomotor correction is a robust contributor to force variability during index finger abduction by older adults

Directory of Open Access Journals (Sweden)

Brian L Tracy

2015-12-01

Full Text Available We examined aging-related differences in the contribution of visuomotor correction to force fluctuations during index finger abduction via the analysis of two datasets from similar subjects. Study 1 Young (N= 27, 23+/-8 yrs and older adults (N=14, 72+/- 9 yrs underwent assessment of maximum voluntary contraction force (MVC and force steadiness during constant-force (CF index finger abduction (2.5, 30, 65% MVC. For each trial, visual feedback of the force (VIS was provided for 8-10 s and removed for 8-10s (NOVIS. Visual gain of the force feedback at 2.5% MVC was high; 12- and 26-fold greater than the 30% and 65% MVC targets. Mean force, standard deviation (SD of force, and coefficient of variation (CV of force was calculated for detrended (<0.5Hz drift removed VIS and NOVIS data segments. Study 2 A similar group of 14 older adults performed discrete, randomly-ordered VIS or NOVIS trials at low target forces (1-3% MVC and high visual gain. Study 1 For young adults the CV of force was similar between VIS and NOVIS for the 2.5% (4.8 vs. 4.3%, 30% (3.2 vs. 3.2% and 65% (3.5 vs. 4.2% target forces. In contrast, for older adults the CV of force was greater for VIS than NOVIS for 2.5% MVC (6.6 vs. 4.2%, P<0.001, but not for the 30% (2.4 vs. 2.4% and 65% (3.1 vs. 3.3% target forces. At 2.5% MVC, the increase in CV of force for VIS compared with NOVIS was significantly greater (age x visual condition P=0.008 for older than young adults. Study 2 Similarly, for older adults performing discrete, randomly ordered trials the CV of force was greater for VIS than NOVIS (6.04 vs. 3.81%, P=0.01. When visual force feedback was a dominant source of information at low forces, normalized force variability was ~58% greater for older adults, but only 11% greater for young adults. The significant effect of visual feedback for older adults was not dependent on the order of presentation of visual conditions. The results indicate that impaired processing of visuomotor

Influence of variable heat transfer coefficient of fireworks and crackers on thermal explosion critical ambient temperature and time to ignition

Directory of Open Access Journals (Sweden)

Guo Zerong

2016-01-01

Full Text Available To study the effect of variable heat transfer coefficient of fireworks and crackers on thermal explosion critical ambient temperature and time to ignition, considering the heat transfer coefficient as the power function of temperature, mathematical thermal explosion steady state and unsteady-state model of finite cylindrical fireworks and crackers with complex shell structures are established based on two-dimensional steady state thermal explosion theory. The influence of variable heat transfer coefficient on thermal explosion critical ambient temperature and time to ignition are analyzed. When heat transfer coefficient is changing with temperature and in the condition of natural convection heat transfer, critical ambient temperature lessen, thermal explosion time to ignition shorten. If ambient temperature is close to critical ambient temperature, the influence of variable heat transfer coefficient on time to ignition become large. For firework with inner barrel in example analysis, the critical ambient temperature of propellant is 463.88 K and the time to ignition is 4054.9s at 466 K, 0.26 K and 450.8s less than without considering the change of heat transfer coefficient respectively. The calculation results show that the influence of variable heat transfer coefficient on thermal explosion time to ignition is greater in this example. Therefore, the effect of variable heat transfer coefficient should be considered into thermal safety evaluation of fireworks to reduce potential safety hazard.

Forcing, feedback and internal variability in global temperature trends.

Science.gov (United States)

Marotzke, Jochem; Forster, Piers M

2015-01-29

Most present-generation climate models simulate an increase in global-mean surface temperature (GMST) since 1998, whereas observations suggest a warming hiatus. It is unclear to what extent this mismatch is caused by incorrect model forcing, by incorrect model response to forcing or by random factors. Here we analyse simulations and observations of GMST from 1900 to 2012, and show that the distribution of simulated 15-year trends shows no systematic bias against the observations. Using a multiple regression approach that is physically motivated by surface energy balance, we isolate the impact of radiative forcing, climate feedback and ocean heat uptake on GMST--with the regression residual interpreted as internal variability--and assess all possible 15- and 62-year trends. The differences between simulated and observed trends are dominated by random internal variability over the shorter timescale and by variations in the radiative forcings used to drive models over the longer timescale. For either trend length, spread in simulated climate feedback leaves no traceable imprint on GMST trends or, consequently, on the difference between simulations and observations. The claim that climate models systematically overestimate the response to radiative forcing from increasing greenhouse gas concentrations therefore seems to be unfounded.

New Explicit Solutions of (1 + 1)-Dimensional Variable-Coefficient Broer-Kaup System

International Nuclear Information System (INIS)

Yan Zhilian; Zhou Jianping

2010-01-01

By using the compatibility method, many explicit solutions of the (1 + 1)-dimensional variable-coefficient Broer-Kaup system are constructed, which include new solutions expressed by error function, Bessel function, exponential function, and Airy function. Some figures of the solutions are given by the symbolic computation system Maple. (general)

Effect of Non-Equilibrium Condensation on Force Coefficients in Transonic Airfoil Flow

Energy Technology Data Exchange (ETDEWEB)

Choi, Seung Min; Kang, Hui Bo; Kwon, Young Doo; Kwon, Soon Bum [Kyungpook National Univeristy, Daegu (Korea, Republic of); Jeon, Heung Kyun [Daegu Health College, Daegu (Korea, Republic of)

2014-12-15

The present study investigated the effects of non-equilibrium condensation with the angle of attack on the coefficients of pressure, lift, and drag in the transonic 2-D flow of NACA0012 by numerical analysis of the total variation diminishing (TVD) scheme. At T{sub 0}=298 K and α=3°, the lift coefficients for M{sub ∞}=0.78 and 0.81 decreased monotonically with increasing Φ{sub 0}. In contrast, for M{sub ∞} corresponding to the Mach number of the force break, CL increased with Φ{sub 0}. For α=3° and Φ{sub 0}=0%, CD increased markedly as M{sub ∞} increased. However, at Φ{sub 0}=60% and α=3°, which corresponded to the case of the condensation having a large influence, CD increased slightly as M{sub ∞} increased. The decrease in profile drag by non-equilibrium condensation grew as the angle of attack and stagnation relative humidity increased for the same free stream transonic Mach number. At Φ{sub 0}=0%, the coefficient of the wave drag increased with the attack angle and free stream Mach number. When Φ{sub 0}>50%, the coefficient of the wave drag decreased as α and M{sub ∞} increased. Lowering Φ{sub 0} and increasing M{sub ∞} increased the maximum Mach number.

Mechanisms driving variability in the ocean forcing of Pine Island Glacier.

Science.gov (United States)

Webber, Benjamin G M; Heywood, Karen J; Stevens, David P; Dutrieux, Pierre; Abrahamsen, E Povl; Jenkins, Adrian; Jacobs, Stanley S; Ha, Ho Kyung; Lee, Sang Hoon; Kim, Tae Wan

2017-02-17

Pine Island Glacier (PIG) terminates in a rapidly melting ice shelf, and ocean circulation and temperature are implicated in the retreat and growing contribution to sea level rise of PIG and nearby glaciers. However, the variability of the ocean forcing of PIG has been poorly constrained due to a lack of multi-year observations. Here we show, using a unique record close to the Pine Island Ice Shelf (PIIS), that there is considerable oceanic variability at seasonal and interannual timescales, including a pronounced cold period from October 2011 to May 2013. This variability can be largely explained by two processes: cumulative ocean surface heat fluxes and sea ice formation close to PIIS; and interannual reversals in ocean currents and associated heat transport within Pine Island Bay, driven by a combination of local and remote forcing. Local atmospheric forcing therefore plays an important role in driving oceanic variability close to PIIS.

The relations between de-alerting nuclear force and nuclear strategy

International Nuclear Information System (INIS)

Li Zhimin

2001-01-01

De-alerting nuclear force is a hot-point issue in recent years. The relations between de-alerting and strategy (including nuclear force, target doctrine and use principle et al.), stability, advanced conventional force and NMD of the United States are analyzed, the impact of de-alerting on Chinese nuclear force were discussed and the proposal of de-alerting by stages is presented

Effects of variable sticking coefficients on the stability of reactive sputtering process

International Nuclear Information System (INIS)

Li Chuan; Hsieh Janghsing

2004-01-01

In reactive sputtering, the introduction of a reactive gas can lead to a hysteresis transition from metal to compounds in both the target and substrate. The hysteresis transition is characterized by a sudden change in partial pressure, sputtering rate, fraction of compound formation, etc. Therefore, stability is an important issue in the process control. In this paper, a mathematical model with variable sticking coefficients based on surface kinetics is used to study the stability of the process. The variable sticking coefficient represents different mechanisms for surface reactions from the Langmuir to precursor type. In order to facilitate the analysis, several nondimensional parameters are identified and used for formulation. Results show that an unsteady system converges to a steady state relatively fast at low inflow rates. With an eigenvalue analysis, the range of positive eigenvalues is consistent with the presence of a hysteresis loop. It is also found that when the chemical reaction on the substrate is moderate, a higher sputter yield of the compound leads to a more stable steady state at lower inflow rates. Regarding the sticking mechanism, for the type of precursors with the parameter k < 1, the compound is easier to form and saturate on the surface due to the higher default sticking coefficient and the lower operating conditions for the hysteresis transition

Influence of a variable Rayleigh scattering-loss coefficient on the light backscattering in multimode optical fibers.

Science.gov (United States)

Bisyarin, M A; Kotov, O I; Hartog, A H; Liokumovich, L B; Ushakov, N A

2017-06-01

The recently developed diffraction technique of analytical investigation of the Rayleigh backscattering produced by an incident fundamental mode in a multimode optical fiber with an arbitrary refractive index profile is supplemented by taking into account the Rayleigh scattering-loss coefficient, which could be variable within the fiber cross section. The relative changes in various radial and azimuthal modes' excitation levels, due to some typical radial dependences of this coefficient, are computed for the quadratic- and step-index fibers. It is stated that the excitation efficiency could either rise or decay for different modes. The effect of the variable Rayleigh scattering-loss coefficient is shown to be more noticeable in the fibers with a quadratic refractive index profile, whereas it is negligible in actual multimode step-index fibers.

The Impact of Variable Wind Shear Coefficients on Risk Reduction of Wind Energy Projects.

Science.gov (United States)

Corscadden, Kenneth W; Thomson, Allan; Yoonesi, Behrang; McNutt, Josiah

2016-01-01

Estimation of wind speed at proposed hub heights is typically achieved using a wind shear exponent or wind shear coefficient (WSC), variation in wind speed as a function of height. The WSC is subject to temporal variation at low and high frequencies, ranging from diurnal and seasonal variations to disturbance caused by weather patterns; however, in many cases, it is assumed that the WSC remains constant. This assumption creates significant error in resource assessment, increasing uncertainty in projects and potentially significantly impacting the ability to control gird connected wind generators. This paper contributes to the body of knowledge relating to the evaluation and assessment of wind speed, with particular emphasis on the development of techniques to improve the accuracy of estimated wind speed above measurement height. It presents an evaluation of the use of a variable wind shear coefficient methodology based on a distribution of wind shear coefficients which have been implemented in real time. The results indicate that a VWSC provides a more accurate estimate of wind at hub height, ranging from 41% to 4% reduction in root mean squared error (RMSE) between predicted and actual wind speeds when using a variable wind shear coefficient at heights ranging from 33% to 100% above the highest actual wind measurement.

CD Review: Tour de Force

Directory of Open Access Journals (Sweden)

Diana Golden

2016-10-01

Full Text Available Review of Tour de Force, the third album from C Force, an ensemble comprised of flutist Christine Gangelhoff, euphoniumist Christian Justilien, and pianist Christy Lee. With repertoire spanning over two centuries, the trio embarks on a musical tour to Guadaloupe, Jamaica, and Haiti on Disc One, and then Trinidad and Tobago, Curaçao, the U.S. Virgin Islands and the Bahamas on Disc Two. Just as the eclectic album artwork by John Cox might suggest, Tour de Force provides listeners with a sense of the rich tapestry of musical connections shared in art music across the Caribbean. This two-disc set (released March 2016 was recorded at the Performing Arts Center of The College of The Bahamas and produced by Terry Manning of Lucky Seven Records.

Variation in aerodynamic coefficients with altitude

Science.gov (United States)

Shahid, Faiza; Hussain, Mukkarum; Baig, Mirza Mehmood; Haq, Ihtram ul

Precise aerodynamics performance prediction plays key role for a flying vehicle to get its mission completed within desired accuracy. Aerodynamic coefficients for same Mach number can be different at different altitude due to difference in Reynolds number. Prediction of these aerodynamics coefficients can be made through experiments, analytical solution or Computational Fluid Dynamics (CFD). Advancements in computational power have generated the concept of using CFD as a virtual Wind Tunnel (WT), hence aerodynamic performance prediction in present study is based upon CFD (numerical test rig). Simulations at different altitudes for a range of Mach numbers with zero angle of attack are performed to predict axial force coefficient behavior with altitude (Reynolds number). Similar simulations for a fixed Mach number '3' and a range of angle of attacks are also carried out to envisage the variation in normal force and pitching moment coefficients with altitude (Reynolds number). Results clearly depict that the axial force coefficient is a function of altitude (Reynolds number) and increase as altitude increases, especially for subsonic region. Variation in axial force coefficient with altitude (Reynolds number) slightly increases for larger values of angle of attacks. Normal force and pitching moment coefficients do not depend on altitude (Reynolds number) at smaller values of angle of attacks but show slight decrease as altitude increases. Present study suggests that variation of normal force and pitching moment coefficients with altitude can be neglected but the variation of axial force coefficient with altitude should be considered for vehicle fly in dense atmosphere. It is recommended to continue this study to more complex configurations for various Mach numbers with side slip and real gas effects.

Sea level variability at Adriatic coast and its relationship to atmospheric forcing

Energy Technology Data Exchange (ETDEWEB)

Bergant, K. [Centre for Atmospheric Research, Nova Gorica Polytechnic, Nova Gorica (Slovenia); Susnik, M.; Strojan, I. [Dept. of Hydrology, Environmental Agency of the Republic of Slovenia, Ljubljana (Slovenia); Shaw, A.G.P. [James Rennel Div., National Oceanography Centre, Empress Dock, Southampton (United Kingdom)

2005-07-01

Sea level (SLH) variability at the Adriatic coast was investigated for the period 1872-2001 using monthly average values of observations at 13 tide gauge stations. Linear trends and seasonal cycles were investigated first and removed afterwards from the data. Empirical orthogonal functions (EOF) analysis was used further on remaining anomalies (SLA) to extract the regional intermonthly variability of SLH. It was found that the leading EOF and its principal component (PC) explain a major part of SLA variability (92%). The correlation between the reconstructed SLA, based on leading EOF and its PC, and overlapping observed SLA values for selected tide gauge stations is between 0.93 and 0.99. Actual SLH values at tide gauge stations can be reconstructed and some gaps in the data can be filled in on the basis of estimated SLA values if reasonable estimates of long-term trends and seasonal cycles are also available. A strong, seasonally dependent relationship between SLA at the Adriatic coast and atmospheric forcing, represented by sea level pressure (SLP) fields, was also found. Comparing the time series of leading PC and gridded SLP data for the period 1948-2001, the highest correlation coefficients (r) of -0.92 in winter, -0.84 in spring, -0.66 in summer, and -0.91 in autumn were estimated for a SLP grid point located in northern Italy. The SLP variability on this grid point contains information about the isostatic response of the sea level at the Adriatic coast, but can also be treated as a sort of teleconnection index representing the large-scale SLP variability across central and southern Europe. To some extent the large-scale SLP variability that affects the SLA at the Adriatic coast can be related to the North Atlantic Oscillation (NAO), because significant correlations were found between the NAO index and the first PC of SLA (r{sub winter}=-0.56, r{sub spring}=-0.45, r{sub summer}=-0.48, and r{sub autumn}=-0.43) for the period 1872-2001. The use of partial least

Intraclass Correlation Coefficients in Hierarchical Design Studies with Discrete Response Variables: A Note on a Direct Interval Estimation Procedure

Science.gov (United States)

Raykov, Tenko; Marcoulides, George A.

2015-01-01

A latent variable modeling procedure that can be used to evaluate intraclass correlation coefficients in two-level settings with discrete response variables is discussed. The approach is readily applied when the purpose is to furnish confidence intervals at prespecified confidence levels for these coefficients in setups with binary or ordinal…

Coeficientes de transferencia de calor experimental para el enfriamiento de licor en intercambiadores de placas//Experimental heat transfer coefficients for the liquor cooling in plate heat exchanger

Directory of Open Access Journals (Sweden)

Enrique Torres‐Tamayo

2014-01-01

Full Text Available La pérdida de eficiencia del proceso de enfriamiento del licor amoniacal, mediante el uso de intercambiadores de calor de placas, está asociada a imprecisiones en la estimación de los coeficientes de transferencia de calor y la acumulación de incrustaciones en la superficie de intercambio. El objetivo de la investigación es determinar los coeficientes de transferencia de calor y la influencia de lasincrustaciones en la pérdida de eficiencia de la instalación. Mediante un procedimiento iterativo se estableció la ecuación del número de Nusselt y su relación con el número de Reynolds y Prandtl. Se utilizó un diseño experimental multifactorial. Los resultados predicen el conocimiento de los coeficientespara el cálculo del número de Nusselt en ambos fluidos. Los valores de los coeficientes del licor amoniacal son inferiores, ello se debe a la presencia de componentes gaseosos. La ecuación obtenida muestra correspondencia con el modelo de Buonapane, el error comparativo es del 3,55 %.Palabras claves: intercambiador de calor de placas, coeficientes de transferencia de calor, eficiencia térmica.______________________________________________________________________________AbstractThe loss of efficiency of the ammonia liquor cooling process, by means of the plate heat exchanger, is associated to the incorrect estimate of the heat transfer coefficients and the accumulation of inlays in the exchange surface. The objective of the investigation is to determine the transfer coefficients and the influence of the inlays in the efficiency loss of the installation. By means of an iterative procedure was obtained the Nusselt number equation and the relationship with the Reynolds and Prandtl number, for it was used it a design experimental multifactorial. The results predict the knowledge of the coefficients forthe calculation of the Nusselt number for both fluids. The ammonia liquor coefficients values are inferior, due to the presence of gassy

Analyses of Lattice Traffic Flow Model on a Gradient Highway

International Nuclear Information System (INIS)

Gupta Arvind Kumar; Redhu Poonam; Sharma Sapna

2014-01-01

The optimal current difference lattice hydrodynamic model is extended to investigate the traffic flow dynamics on a unidirectional single lane gradient highway. The effect of slope on uphill/downhill highway is examined through linear stability analysis and shown that the slope significantly affects the stability region on the phase diagram. Using nonlinear stability analysis, the Burgers, Korteweg-deVries (KdV) and modified Korteweg-deVries (mKdV) equations are derived in stable, metastable and unstable region, respectively. The effect of reaction coefficient is examined and concluded that it plays an important role in suppressing the traffic jams on a gradient highway. The theoretical findings have been verified through numerical simulation which confirm that the slope on a gradient highway significantly influence the traffic dynamics and traffic jam can be suppressed efficiently by considering the optimal current difference effect in the new lattice model. (nuclear physics)

Portfolio theory of optimal isometric force production: Variability predictions and nonequilibrium fluctuation-dissipation theorem

NARCIS (Netherlands)

Frank, T.D.; Patanarapeelert, K.; Beek, P.J.

2008-01-01

We derive a fundamental relationship between the mean and the variability of isometric force. The relationship arises from an optimal collection of active motor units such that the force variability assumes a minimum (optimal isometric force). The relationship is shown to be independent of the

Auto-Baecklund transformation and similarity reductions to the variable coefficients variant Boussinesq system

Energy Technology Data Exchange (ETDEWEB)

Moussa, M.H.M. [Department of Mathematic, Faculty of Education, Ain Shams University, Roxy, Hiliopolis, Cairo (Egypt)], E-mail: m_h_m_moussa@yahoo.com; El Shikh, Rehab M. [Department of Mathematic, Faculty of Education, Ain Shams University, Roxy, Hiliopolis, Cairo (Egypt)

2008-02-25

Based on the closed connections among the homogeneous balance (HB) method, Weiss-Tabor-Carneval (WTC) method and Clarkson-Kruskal (CK) method, we study Baecklund transformation and similarity reductions of the variable coefficients variant Boussinesq system. In the meantime, new exact solutions also are found.

Variation in aerodynamic coefficients with altitude

Directory of Open Access Journals (Sweden)

Faiza Shahid

Full Text Available Precise aerodynamics performance prediction plays key role for a flying vehicle to get its mission completed within desired accuracy. Aerodynamic coefficients for same Mach number can be different at different altitude due to difference in Reynolds number. Prediction of these aerodynamics coefficients can be made through experiments, analytical solution or Computational Fluid Dynamics (CFD. Advancements in computational power have generated the concept of using CFD as a virtual Wind Tunnel (WT, hence aerodynamic performance prediction in present study is based upon CFD (numerical test rig. Simulations at different altitudes for a range of Mach numbers with zero angle of attack are performed to predict axial force coefficient behavior with altitude (Reynolds number. Similar simulations for a fixed Mach number ‘3’ and a range of angle of attacks are also carried out to envisage the variation in normal force and pitching moment coefficients with altitude (Reynolds number. Results clearly depict that the axial force coefficient is a function of altitude (Reynolds number and increase as altitude increases, especially for subsonic region. Variation in axial force coefficient with altitude (Reynolds number slightly increases for larger values of angle of attacks. Normal force and pitching moment coefficients do not depend on altitude (Reynolds number at smaller values of angle of attacks but show slight decrease as altitude increases. Present study suggests that variation of normal force and pitching moment coefficients with altitude can be neglected but the variation of axial force coefficient with altitude should be considered for vehicle fly in dense atmosphere. It is recommended to continue this study to more complex configurations for various Mach numbers with side slip and real gas effects. Keywords: Mach number, Reynolds number, Blunt body, Altitude effect, Angle of attacks

Variability of sea ice deformation rates in the Arctic and their relationship with basin-scale wind forcing

Directory of Open Access Journals (Sweden)

A. Herman

2012-12-01

Full Text Available The temporal variability of the moments of probability distribution functions (pdfs of total sea ice deformation rates in the Arctic is analyzed in the context of the basin-scale wind forcing acting on the ice. The pdfs are estimated for 594 satellite-derived sea ice deformation maps from 11 winter seasons between 1996/1997 and 2007/2008, provided by the RADARSAT Geophysical Processor System. The temporal scale analyzed equals 3 days. The moments of the pdfs, calculated for a range of spatial scales (12.5–900 km, have two dominating components of variability: a seasonal cycle, with deformation rates decreasing throughout winter towards a minimum in March; and a short-term, synoptic variability, strongly correlated with the area-averaged magnitude of the wind stress over the Arctic, estimated based on the NCEP-DOE Reanalysis-2 data (correlation coefficient of 0.71 for the mean deformation rate. Due to scaling properties of the moments, logarithms of higher moments are strongly correlated with the wind stress as well. Exceptions are observed only at small spatial scales, as a result of extreme deformation events, not directly associated with large-scale wind forcing. By repeating the analysis within regions of different sizes and locations, we show that the wind–ice deformation correlation is largest at the basin scale and decreases with decreasing size of the area of study. Finally, we suggest that a positive trend in seasonally averaged correlation between sea ice deformation rates and the wind forcing, present in the analyzed data, may be related to an observed decrease in the multi-year ice area in the Arctic, indicating possibly even stronger correlations in the future.

A program for calculating load coefficient matrices utilizing the force summation method, L218 (LOADS). Volume 1: Engineering and usage

Science.gov (United States)

Miller, R. D.; Anderson, L. R.

1979-01-01

The LOADS program L218, a digital computer program that calculates dynamic load coefficient matrices utilizing the force summation method, is described. The load equations are derived for a flight vehicle in straight and level flight and excited by gusts and/or control motions. In addition, sensor equations are calculated for use with an active control system. The load coefficient matrices are calculated for the following types of loads: translational and rotational accelerations, velocities, and displacements; panel aerodynamic forces; net panel forces; shears and moments. Program usage and a brief description of the analysis used are presented. A description of the design and structure of the program to aid those who will maintain and/or modify the program in the future is included.

Variation du coefficient de collage de l'argent et de l'or durant leur condensation sur film de MgO

Science.gov (United States)

Desrousseaux, G.; Carlan, A.; Jiang, Z.

1993-10-01

The incidence rate dependence of the sticking coefficient during the growth of gold (or silver) condensate on MgO film is experimentally investigated for a substrate kept at room temperature. This MgO substrate is deposited on quartz monitor by evaporation under UHV from a Knudsen cell. Then, from another cell, the flux of metal atoms impinges on the MgO film which covers the quartz. Under this flux of incident metal atoms, the changes (respectively θ and f) of the temperature and of the frequency of the quartz oscillator are then simultaneously recorded. Both continuous measurements enable us to calculate, at different times t, the sticking coefficient η (t) defined as the ration between the condensed metal rate q and the incident rate R. We use the results to plot η versus t and examine the slope of η-rise until the time t at which η (t) reaches unity. The progression of η (t) reaches unity. The progression of η (t) from zero to unity during the metal deposition is explained by assuming that the nucleation on preferred sites with capture of adatoms at the edge of stable germs is the prevailing condensation mechanism at the initial stage of the condensation. Our experimental results could be fitted better by assuming an exponential growth of the site occupation than an increase of the number density n_s(t) with (Rt)^{1/3}. On étudie expérimentalement la dépendance que peut présenter, par rapport au flux métallique incident, la progression vers l'unité du coefficient de collage. Pour cela, on suit cette progression pour l'or et l'argent condensés sur film de MgO à température proche de l'ambiante. Le substrat de MgO est déposé sur un quartz de pesée par évaporation sous ultra-vide à partir d'une cellule de Knudsen. Une autre cellule est utilsée pour déposer l'un de ces métaux sur le film de MgO couvrant le quartz. Les variations θ et f de la température et de la fréquence d'oscillations du quartz de pesée sous le flux d'atomes incidents

Obtención de columnas de ZnO. Variables a controlar (I

Directory of Open Access Journals (Sweden)

Cembrero, J.

2003-12-01

Full Text Available In the present paper, the electroplating process to obtain columns of zinc oxide (ZnO on a glass substrate covered with a conductive oxide layer of tin and fluorine (FTO or SnO2; F, has been described. The electrolyte used is a solution of ZnCl2 (5 x 10-3 M and 0,1 M of KCl in desminerized water. The following parameters have been controlled: current density, time of substrate exposure to the electrolyte and the process temperature. The measured parameter was the average height of the columns evaluated by Atomic Force Microscopy (AFM. In order to investigate the influence of the principal factors and its interactions that have taken place in the electroplating process, a factorial design at two levels (high + and low - has been used.The results show that the current density and time exposure help the formation of column growth, but the elevate temperature (80 – 90ºC has a negative influence.

En el presente trabajo se describe el proceso de electrodeposición utilizado por los autores para la obtención de columnas de óxido de zinc (ZnO sobre un sustrato de vidrio recubierto de una capa conductora de óxido de estaño y flúor (FTO. Como electrolito se empleó una solución de concentración 5⋅10-3 M de ZnCl2 y 0,1 M de KCl en agua desmineralizada y las variables o factores a controlar fueron la densidad de corriente, el tiempo de exposición del sustrato al electrolito y la temperatura del proceso. La variable respuesta fue la altura promedio de las columnas de ZnO medidas con el microscopio de fuerza atómica (AFM. Para investigar la influencia de los principales factores e interacciones que intervienen en el proceso de crecimiento, se ha utilizado un diseño factorial combinando tres parámetros de crecimiento con dos niveles diferentes (alto + y bajo - . Esto supone realizar un total de 8 experiencias de parámetros de crecimiento diferentes. Los resultados muestran que la densidad de corriente y el tiempo de exposici

Higher-order Peregrine combs and Peregrine walls for the variable-coefficient Lenells-Fokas equation

Science.gov (United States)

Wang, Zi-Qi; Wang, Xin; Wang, Lei; Sun, Wen-Rong; Qi, Feng-Hua

2017-02-01

In this paper, we study the variable-coefficient Lenells-Fokas (LF) model. Under large periodic modulations in the variable coefficients of the LF model, the generalized Akhmediev breathers develop into the breather multiple births (BMBs) from which we obtain the Peregrine combs (PCs). The PCs can be considered as the limiting case of the BMBs and be transformed into the Peregrine walls (PWs) with a specific amplitude of periodic modulation. We further investigate the spatiotemporal characteristics of the PCs and PWs analytically. Based on the second-order breather and rogue-wave solutions, we derive the corresponding higher-order structures (higher-order PCs and PWs) under proper periodic modulations. What is particularly noteworthy is that the second-order PC can be converted into the Peregrine pyramid which exhibits the higher amplitude and thickness. Our results could be helpful for the design of experiments in the optical fiber communications.

Painleve analysis and transformations for a generalized two-dimensional variable-coefficient Burgers model from fluid mechanics, acoustics and cosmic-ray astrophysics

International Nuclear Information System (INIS)

Wei, Guang-Mei

2006-01-01

Generalized two-dimensional variable-coefficient Burgers model is of current value in fluid mechanics, acoustics and cosmic-ray astrophysics. In this paper, Painleve analysis leads to the constraints on the variable coefficients for such a model to pass the Painleve test and to an auto-Baecklund transformation. Moreover, four transformations from this model are constructed, to the standard two-dimensional and one-dimensional Burgers models with the relevant constraints on the variable coefficients via symbolic computation. By virtue of the given transformations the properties and solutions of this model can be obtained from those of the standard two-dimensional and one-dimensional ones

The effect of diffusion in a new viscous continuum traffic model

International Nuclear Information System (INIS)

Yu Lei; Li Tong; Shi Zhongke

2010-01-01

In this Letter, we propose a new continuum traffic model with a viscous term. The linear stability condition for viscous shock waves is derived. We derive the Korteweg-de Vries (KdV) equation near the neutral stability line. Then we investigate the effect of the viscous term by numerical simulations. The results show that viscosity may induce oscillations and the amplitude of the oscillation increases as the viscosity coefficient increases. This agrees with the linear stability condition. The local clusters are compressed by increasing the viscosity coefficient in the cluster study.

The effect of diffusion in a new viscous continuum traffic model

Energy Technology Data Exchange (ETDEWEB)

Yu Lei, E-mail: yuleijk@126.co [College of Automation, Northwestern Polytechnical University, Xi' an, ShaanXi (China); Li Tong [Department of Mathematics, University of Iowa, Iowa City, IA (United States); Shi Zhongke [College of Automation, Northwestern Polytechnical University, Xi' an, ShaanXi (China)

2010-05-10

In this Letter, we propose a new continuum traffic model with a viscous term. The linear stability condition for viscous shock waves is derived. We derive the Korteweg-de Vries (KdV) equation near the neutral stability line. Then we investigate the effect of the viscous term by numerical simulations. The results show that viscosity may induce oscillations and the amplitude of the oscillation increases as the viscosity coefficient increases. This agrees with the linear stability condition. The local clusters are compressed by increasing the viscosity coefficient in the cluster study.

Uranium self-diffusion in uranium monocarbide; Determination du coefficient d'autodiffusion de l'uranium dans son monocarbure

Energy Technology Data Exchange (ETDEWEB)

Villaine, P [Commissariat a l' Energie Atomique, 38 - Grenoble (France). Centre d' Etudes Nucleaires

1967-10-01

Uranium self diffusion in near-stoichiometric stabilized uranium monocarbide has been investigated in the temperature range 1450-2000 deg. C. A thin layer of {sup 235}UC was deposited onto the samples and the diffusion profiles were analyzed by both sectioning and alpha-spectrometry techniques. The variation with temperature of the self-diffusion coefficient can be expressed by the equation: D = 7.5 x 10{sup -5} exp [-(81 {+-} 10) kcal/mole / RT] Cm{sup 2} s{sup -1} The coefficient D decreases with increasing carbon content. Autoradiographs and profile analysis have evidenced a preferential grain-boundary diffusion at all temperatures and compositions investigated. This phenomenon was used for a study of grain-boundary migration and for the evaluation of grain-boundary diffusion coefficients. The activation energy thus derived is close to the volume diffusion activation energy. (author) [French] L'autodiffusion de l'uranium dans le monocarbure d'uranium de composition voisine de la stoechiometrie et stabilise par recuit prealable, a ete etudiee entre 1450 et 2000 deg. C par la methode du depot mince de traceur, suivie des techniques d'abrasion comptage et de spectrometrie alpha. La variation avec la temperature du coefficient d'autodiffusion peut s'ecrire: D = 7.5 x 10{sup -5} exp [-(81 {+-} 10) kcal/mole / RT] Cm{sup 2} s{sup -1} Le coefficient D decroit avec une augmentation de la teneur en carbone. L'observation d'autoradiographies et l'analyse de profils de diffusion ont mis en evidence l'importance d'une diffusion intergranulaire preferentielle pour toutes les compositions etudiees et a toutes les temperatures. Cette diffusion a egalement ete utilisee pour l'etude de la migration des joints de grains et pour le calcul approche du coefficient de diffusion mtergranulaire. L'energie d'activation ainsi determinee est voisine de celle correspondant a la diffusion volumique. (auteur)

revue bibliographique des représentations analytiques de coefficients d'activité ioniques moyens dans les solutions binaires électrolytiques Bibliographic Review of Analytic Equations of Mean Lonic Activity Coefficients in Electrolytic Binary Solutions

Directory of Open Access Journals (Sweden)

Cruz J. -L.

2006-11-01

Full Text Available Le calcul de certaines propriétés à l'équilibre, de systèmes électrolytiques, nécessite la connaissance des coefficients d'activité en phase liquide des constituants de ces systèmes. L'estimation du coefficient d'activité ionique moyen de l'électrolyte permet, pour des systèmes binaires, de calculer ces coefficients d'activité. Dans cette revue bibliographique sont présentées les principales expressions analytiques, de coefficients d'activité ioniques moyens, fournies par la littérature. II est possible de classer ces expressions en plusieurs grandes catégories en fonction des modèles dont elles dérivent. Des critères de choix, de l'une ou l'autre de ces équations, sont proposés suivant le type de système électrolytique et le domaine de concentration étudiés. Liquid-phase activity coefficients must be known in order to calculate various equilibrium properties of electrolytic systems. For binary systems, these coefficients can be calculated by estimating the mean ionic activity coefficient of the electrolyte. This bibliographic review describes the principal analytic equations for mean ionic activity coefficients found in the literature. These equations can be classified in several major categories according to the theoretical model from which they are derived. Some criteria are proposed for choosing one or another of these equations on the basis of the type of electrolytic system and the concentration range studied.

Experimental study on the control interaction force coefficient; Soju ryutairyoku kansho keisu ni kansuru jikkenteki kenkyu

Energy Technology Data Exchange (ETDEWEB)

Nakatake, K; Oda, K; Yoshitake, A; Fujita, K; Nakajima, A [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-04-10

The interaction force induced to hull by steering is important for prediction of control performance of ships. The control interaction force coefficient dependent on the steering has been investigated through the rudder angle tests using three small model ships with a length of 2.5 m, i.e., mathematical type of ship, cargo type of ship, and tanker type of ship. The interaction forces acting on the hull, propeller, and rudder were determined by measuring the lateral force as well as the forward force of the hydrodynamic forces acting on the rudder. These forces were compared with the theoretically calculated values. Prior to the rudder angle tests, the self propulsion factor and the number of revolution of propeller were determined from the results of the open water tests, resistance tests, and self propulsion tests by the changing load method. The rudder angle tests were conducted under this number of revolution of propeller as a standard condition, and under those increasing and decreasing by 15%. Consequently, the interaction forces determined from the rudder angle tests agreed well with those determined from the other tests. When comparing the control hydrodynamic forces determined from the tests with those theoretically calculated, a similar trend was observed. Effectiveness of the theoretical model was confirmed. 4 refs., 14 figs., 3 tabs.

Wronskian and Grammian Determinant Solutions for a Variable-Coefficient Kadomtsev-Petviashvili Equation

International Nuclear Information System (INIS)

Yao Zhenzhi; Zhu Hongwu; Meng Xianghua; Lue Xing; Shan Wenrui; Tian Bo; Zhang Chunyi

2008-01-01

In this paper, we derive the bilinear form for a variable-coefficient Kadomtsev-Petviashvili-typed equation. Based on the bilinear form, we obtain the Wronskian determinant solution, which is proved to be indeed an exact solution of this equation through the Wronskian technique. In addition, we testify that this equation can be reduced to a Jacobi identity by considering its solution as a Grammian determinant by means of Pfaffian derivative formulae

The forcing of monthly precipitation variability over Southwest Asia during the Boreal cold season

Science.gov (United States)

Hoell, Andrew; Shukla, Shraddhanand; Barlow, Mathew; Cannon, Forest; Kelley, Colin; Funk, Christopher C.

2015-01-01

Southwest Asia, deemed as the region containing the countries of Afghanistan, Iran, Iraq and Pakistan, is water scarce and receives nearly 75% of its annual rainfall during8 the boreal cold season of November-April. The forcing of Southwest Asia precipitation has been previously examined for the entire boreal cold season from the perspective of climate variability originating over the Atlantic and tropical Indo-Pacific Oceans. Here, we examine the inter-monthly differences in precipitation variability over Southwest Asia and the atmospheric conditions directly responsible in forcing monthly November-April precipitation. Seasonally averaged November-April precipitation over Southwest Asia is significantly correlated with sea surface temperature (SST) patterns consistent with Pacific Decadal Variability (PDV), the El Nino-Southern Oscillation (ENSO) and the warming trend of SST (Trend). On the contrary, the precipitation variability during individual months of November-April are unrelated and are correlated with SST signatures that include PDV, ENSO and Trend in different combinations. Despite strong inter-monthly differences in precipitation variability during November- April over Southwest Asia, similar atmospheric circulations, highlighted by a stationary equivalent barotropic Rossby wave centered over Iraq, force the monthly spatial distributions of precipitation. Tropospheric waves on the eastern side of the equivalent barotropic Rossby wave modifies the flux of moisture and advects the mean temperature gradient, resulting in temperature advection that is balanced by vertical motions over Southwest Asia. The forcing of monthly Southwest Asia precipitation by equivalent barotropic Rossby waves is different than the forcing by baroclinic Rossby waves associated with tropically-forced-only modes of climate variability.

Ground reaction force analysed with correlation coefficient matrix in group of stroke patients.

Science.gov (United States)

Szczerbik, Ewa; Krawczyk, Maciej; Syczewska, Małgorzata

2014-01-01

Stroke is the third cause of death in contemporary society and causes many disorders. Clinical scales, ground reaction force (GRF) and objective gait analysis are used for assessment of patient's rehabilitation progress during treatment. The goal of this paper is to assess whether signal correlation coefficient matrix applied to GRF can be used for evaluation of the status of post-stroke patients. A group of patients underwent clinical assessment and instrumented gait analysis simultaneously three times. The difference between components of patient's GRF (vertical, fore/aft, med/lat) and normal ones (reference GRF of healthy subjects) was calculated as correlation coefficient. Patients were divided into two groups ("worse" and "better") based on the clinical functional scale tests done at the beginning of rehabilitation process. The results obtained by these two groups were compared using statistical analysis. An increase of median value of correlation coefficient is observed in all components of GRF, but only in non-paretic leg. Analysis of GRF signal can be helpful in assessment of post-stroke patients during rehabilitation. Improvement in stroke patients was observed in non-paretic leg of the "worse" group. GRF analysis should not be the only tool for objective validation of patient's improvement, but could be used as additional source of information.

Cardinal features of involuntary force variability can arise from the closed-loop control of viscoelastic afferented muscles

Science.gov (United States)

Laine, Christopher M.; Valero-Cuevas, Francisco J.

2018-01-01

Involuntary force variability below 15 Hz arises from, and is influenced by, many factors including descending neural drive, proprioceptive feedback, and mechanical properties of muscles and tendons. However, their potential interactions that give rise to the well-structured spectrum of involuntary force variability are not well understood due to a lack of experimental techniques. Here, we investigated the generation, modulation, and interactions among different sources of force variability using a physiologically-grounded closed-loop simulation of an afferented muscle model. The closed-loop simulation included a musculotendon model, muscle spindle, Golgi tendon organ (GTO), and a tracking controller which enabled target-guided force tracking. We demonstrate that closed-loop control of an afferented musculotendon suffices to replicate and explain surprisingly many cardinal features of involuntary force variability. Specifically, we present 1) a potential origin of low-frequency force variability associated with co-modulation of motor unit firing rates (i.e.,‘common drive’), 2) an in-depth characterization of how proprioceptive feedback pathways suffice to generate 5-12 Hz physiological tremor, and 3) evidence that modulation of those feedback pathways (i.e., presynaptic inhibition of Ia and Ib afferents, and spindle sensitivity via fusimotor drive) influence the full spectrum of force variability. These results highlight the previously underestimated importance of closed-loop neuromechanical interactions in explaining involuntary force variability during voluntary ‘isometric’ force control. Furthermore, these results provide the basis for a unifying theory that relates spinal circuitry to various manifestations of altered involuntary force variability in fatigue, aging and neurological disease. PMID:29309405

Cardinal features of involuntary force variability can arise from the closed-loop control of viscoelastic afferented muscles.

Science.gov (United States)

Nagamori, Akira; Laine, Christopher M; Valero-Cuevas, Francisco J

2018-01-01

Involuntary force variability below 15 Hz arises from, and is influenced by, many factors including descending neural drive, proprioceptive feedback, and mechanical properties of muscles and tendons. However, their potential interactions that give rise to the well-structured spectrum of involuntary force variability are not well understood due to a lack of experimental techniques. Here, we investigated the generation, modulation, and interactions among different sources of force variability using a physiologically-grounded closed-loop simulation of an afferented muscle model. The closed-loop simulation included a musculotendon model, muscle spindle, Golgi tendon organ (GTO), and a tracking controller which enabled target-guided force tracking. We demonstrate that closed-loop control of an afferented musculotendon suffices to replicate and explain surprisingly many cardinal features of involuntary force variability. Specifically, we present 1) a potential origin of low-frequency force variability associated with co-modulation of motor unit firing rates (i.e.,'common drive'), 2) an in-depth characterization of how proprioceptive feedback pathways suffice to generate 5-12 Hz physiological tremor, and 3) evidence that modulation of those feedback pathways (i.e., presynaptic inhibition of Ia and Ib afferents, and spindle sensitivity via fusimotor drive) influence the full spectrum of force variability. These results highlight the previously underestimated importance of closed-loop neuromechanical interactions in explaining involuntary force variability during voluntary 'isometric' force control. Furthermore, these results provide the basis for a unifying theory that relates spinal circuitry to various manifestations of altered involuntary force variability in fatigue, aging and neurological disease.

Short time-scale wind forced variability in the Río de la Plata Estuary and its role on ichthyoplankton retention

Science.gov (United States)

Simionato, C. G.; Berasategui, A.; Meccia, V. L.; Acha, M.; Mianzan, H.

2008-01-01

The Río de la Plata Estuary presents a strong bottom salinity front located over a submerged shoal. Apparently favored by retention processes, it is a spawning ground for several coastal fishes. This estuary is very shallow and essentially wind driven and, moreover, in time scales relevant to biota, estuarine circulation is wind dominated and highly variable. Two intriguing questions are, therefore, how this system can favor retention and what the involved mechanisms are. This paper qualitatively explores mechanisms involved in the estuary where retention is favored applying numerical simulations in which neutral particles - simulating fish eggs and early larvae - are released along the bottom frontal zone and tracked for different wind conditions. Results suggest that retentive features can be a consequence of estuarine response to natural wind variability acting over bathymetric features. For winds from most directions, particles either remain trapped near their launching position or move northeastward to southwestward along the shoal. As alternation of winds that favor along-shoal motion is the dominant feature of wind variability in the region, a retentive scenario results from prevailing wind variability. Additionally, winds that tend to export particles with a poor chance of being restored to the front are neither frequent nor persistent. Results show, therefore, that physical forcing alone might generate a retentive scenario at the inner part of this estuary. The physical retention mechanism is more effective for bottom than for surface launched particles. Wind statistics indicate that the proposed mechanism has different implications for retention along the seasons. Spring is the most favorable season, followed by summer, when particles would have a larger propensity to reach the southern area of the estuary (Samborombón Bay). Fall and winter are increasingly less favorable. All these features are consistent with patterns observed in the region in

Pancreatic enzyme replacement therapy in cystic fibrosis: dose, variability and coefficient of fat absorption

Directory of Open Access Journals (Sweden)

Joaquim Calvo-Lerma

Full Text Available Objectives: Pancreatic enzyme replacement therapy (PERT remains a backbone in the nutritional treatment of cystic fibrosis. Currently, there is a lack of an evidence-based tool that allows dose adjustment. To date, no studies have found an association between PERT dose and fat absorption. Therefore, the aim of the study was to assess the influence of both the PERT dose and the variability in this dose on the coefficient of fat absorption (CFA. Methods: This is a retrospective longitudinal study of 16 pediatric patients (192 food records with three consecutive visits to the hospital over a twelve-month period. Dietary fat intake and PERT were assessed via a four-day food record and fat content in stools was determined by means of a three-day stool sample collection. A beta regression model was built to explain the association between the CFA and the interaction between the PERT dose (lipase units [LU]/g dietary fat and the variability in the PERT dose (standard deviation [SD]. Results: The coefficient of fat absorption increased with the PERT dose when the variability in the dose was low. In contrast, even at the highest PERT dose values, the CFA decreased when the variability was high. The confidence interval suggested an association, although the analysis was not statistically significant. Conclusion: The variability in the PERT dose adjustment should be taken into consideration when performing studies on PERT efficiency. A clinical goal should be the maintenance of a constant PERT dose rather than trying to obtain an optimal value.

Pancreatic enzyme replacement therapy in cystic fibrosis: dose, variability and coefficient of fat absorption.

Science.gov (United States)

Calvo-Lerma, Joaquim; Martínez-Barona, Sandra; Masip, Etna; Fornés, Victoria; Ribes-Koninckx, Carmen

2017-10-01

Pancreatic enzyme replacement therapy (PERT) remains a backbone in the nutritional treatment of cystic fibrosis. Currently, there is a lack of an evidence-based tool that allows dose adjustment. To date, no studies have found an association between PERT dose and fat absorption. Therefore, the aim of the study was to assess the influence of both the PERT dose and the variability in this dose on the coefficient of fat absorption (CFA). This is a retrospective longitudinal study of 16 pediatric patients (192 food records) with three consecutive visits to the hospital over a twelve-month period. Dietary fat intake and PERT were assessed via a four-day food record and fat content in stools was determined by means of a three-day stool sample collection. A beta regression model was built to explain the association between the CFA and the interaction between the PERT dose (lipase units [LU]/g dietary fat) and the variability in the PERT dose (standard deviation [SD]). The coefficient of fat absorption increased with the PERT dose when the variability in the dose was low. In contrast, even at the highest PERT dose values, the CFA decreased when the variability was high. The confidence interval suggested an association, although the analysis was not statistically significant. The variability in the PERT dose adjustment should be taken into consideration when performing studies on PERT efficiency. A clinical goal should be the maintenance of a constant PERT dose rather than trying to obtain an optimal value.

Meridional Modes and Increasing Pacific Decadal Variability Under Anthropogenic Forcing

Science.gov (United States)

Liguori, Giovanni; Di Lorenzo, Emanuele

2018-01-01

Pacific decadal variability has strong impacts on the statistics of weather, atmosphere extremes, droughts, hurricanes, marine heatwaves, and marine ecosystems. Sea surface temperature (SST) observations show that the variance of the El Niño-like decadal variability has increased by 30% (1920-2015) with a stronger coupling between the major Pacific climate modes. Although we cannot attribute these trends to global climate change, the examination of 30 members of the Community Earth System Model Large Ensemble (LENS) forced with the RCP8.5 radiative forcing scenario (1920-2100) suggests that significant anthropogenic trends in Pacific decadal variance will emerge by 2020 in response to a more energetic North Pacific Meridional Mode (PMM)—a well-known El Niño precursor. The PMM is a key mechanism for energizing and coupling tropical and extratropical decadal variability. In the LENS, the increase in PMM variance is consistent with an intensification of the winds-evaporation-SST thermodynamic feedback that results from a warmer mean climate.

Approximate Solutions of Delay Differential Equations with Constant and Variable Coefficients by the Enhanced Multistage Homotopy Perturbation Method

Directory of Open Access Journals (Sweden)

D. Olvera

2015-01-01

Full Text Available We expand the application of the enhanced multistage homotopy perturbation method (EMHPM to solve delay differential equations (DDEs with constant and variable coefficients. This EMHPM is based on a sequence of subintervals that provide approximate solutions that require less CPU time than those computed from the dde23 MATLAB numerical integration algorithm solutions. To address the accuracy of our proposed approach, we examine the solutions of several DDEs having constant and variable coefficients, finding predictions with a good match relative to the corresponding numerical integration solutions.

Estudio de las variables psicosociales em trabajadores de la industria de muebles

Directory of Open Access Journals (Sweden)

José Dionisio de Paula Júnior

2014-12-01

Full Text Available Objetivo: Evaluar la asociación de las variables psicosociales en el trabajo con aspectos sociodemográficos y profesionales de trabajadores de la industria de muebles y la intervención multidisciplinaria. Métodos: La muestra del estudio fue de 146 trabajadores del sector de producción de dos industrias de muebles dividida en dos grupos: Grupo 1 (estudio, Grupo 2 (control. El Grupo 1 fue constituido de 80 trabajadores y el Grupo 2 de 66 trabajadores. El instrumento utilizado para evaluar los trastornos mentales comunes fue el Self Reporting Questionnaire (SRQ-20 y para evaluar los factores psicosociales en el entorno de trabajo se utilizó el Job Content Questionnaire (JCQ. Resultados: Los resultados mostraron diferencia significativa en las dimensiones “autoridad de decisión” (p=0,05, “control sobre El trabajo” (p=0,03 y “esfuerzo físico” (p=0,02 al comparar los grupos de trabajadores. No se encontraron diferencias significativas para las otras variables. Conclusión: La comparación entre los grupos presentó relación para las variables “autoridad de decisión”, “control sobre el trabajo” y “esfuerzo físico” con la intervención multidisciplinaria.

A linear stepping endovascular intervention robot with variable stiffness and force sensing.

Science.gov (United States)

He, Chengbin; Wang, Shuxin; Zuo, Siyang

2018-03-08

Robotic-assisted endovascular intervention surgery has attracted significant attention and interest in recent years. However, limited designs have focused on the variable stiffness mechanism of the catheter shaft. Flexible catheter needs to be partially switched to a rigid state that can hold its shape against external force to achieve a stable and effective insertion procedure. Furthermore, driving catheter in a similar way with manual procedures has the potential to make full use of the extensive experience from conventional catheter navigation. Besides driving method, force sensing is another significant factor for endovascular intervention. This paper presents a variable stiffness catheterization system that can provide stable and accurate endovascular intervention procedure with a linear stepping mechanism that has a similar operation mode to the conventional catheter navigation. A specially designed shape-memory polymer tube with water cooling structure is used to achieve variable stiffness of the catheter. Hence, four FBG sensors are attached to the catheter tip in order to monitor the tip contact force situation with temperature compensation. Experimental results show that the actuation unit is able to deliver linear and rotational motions. We have shown the feasibility of FBG force sensing to reduce the effect of temperature and detect the tip contact force. The designed catheter can change its stiffness partially, and the stiffness of the catheter can be remarkably increased in rigid state. Hence, in the rigid state, the catheter can hold its shape against a [Formula: see text] load. The prototype has also been validated with a vascular phantom, demonstrating the potential clinical value of the system. The proposed system provides important insights into the design of compact robotic-assisted catheter incorporating effective variable stiffness mechanism and real-time force sensing for intraoperative endovascular intervention.

New type side weir discharge coefficient simulation using three novel hybrid adaptive neuro-fuzzy inference systems

Science.gov (United States)

Bonakdari, Hossein; Zaji, Amir Hossein

2018-03-01

In many hydraulic structures, side weirs have a critical role. Accurately predicting the discharge coefficient is one of the most important stages in the side weir design process. In the present paper, a new high efficient side weir is investigated. To simulate the discharge coefficient of these side weirs, three novel soft computing methods are used. The process includes modeling the discharge coefficient with the hybrid Adaptive Neuro-Fuzzy Interface System (ANFIS) and three optimization algorithms, namely Differential Evaluation (ANFIS-DE), Genetic Algorithm (ANFIS-GA) and Particle Swarm Optimization (ANFIS-PSO). In addition, sensitivity analysis is done to find the most efficient input variables for modeling the discharge coefficient of these types of side weirs. According to the results, the ANFIS method has higher performance when using simpler input variables. In addition, the ANFIS-DE with RMSE of 0.077 has higher performance than the ANFIS-GA and ANFIS-PSO methods with RMSE of 0.079 and 0.096, respectively.

Consistency of motor-unit identification during force-varying static contractions

DEFF Research Database (Denmark)

Pilegaard, M; Jensen, B R; Sjøgaard, G

2000-01-01

active either before or after the 1 s at 0% MVC, and 18 as being de-recruited during force decreases and recruited during force increases. Both operators agreed that 16 of these 18 MUs were de-recruited at a higher force level than that at which they were recruited, which may be due...... to the electromechanical delay. The coefficient of variation for double determination of the results obtained by operators A and B was 8.5% for the number of MU firings, 4.5% for the MU mean firing rate, and 8.4% for the MU action potential (MUAP) amplitude. Therefore, the operator interactive decomposition method...... was considered to be valid for studying recruitment and de-recruitment as well as firing rate and MUAP amplitude during static, force-varying ramp contractions....

The effect of surface roughness on the heat exchange and pressure-drop coefficients; Influence des rugosites de paroi sur les coefficients d'echange thermique et de perte de charge

Energy Technology Data Exchange (ETDEWEB)

Malherbe, J M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1963-02-15

The effect of various types of roughness on the wall of an axial tube in an annular space of 15-25 mm cooled by an air-flow has been studied in the case of steady turbulence. Roughness of the type 'disrupter of the boundary layer' was set up using triangular threads of 0.2 to 0.4 mm thickness machined in the tube itself, or brass or glass wire wound on a smooth tube. Tests were also carried out using the roughness provided by regularly spaced pyramids 0.4 mm high. The results obtained showed that the heat exchange increased because of the presence of this roughness. A maximum in the heat exchange and pressure-drop coefficients was observed when the pitch equals about eight times the height of the thread. An analytical method has been developed and experiments have been carried out in which the two walls of the annular space were heated in such a way as to transmit unequal heat flows. The region considered is limited to Reynolds's numbers of between 5 X 10{sup 3} and 5 x 10{sup 4} and wall temperatures of under 250 deg C. (author) [French] L'effet de diverses rugosites sur la paroi du tube central d'un espace annulaire de diametre 15-25 mm refroidi par un ecoulement d'air a ete etudie en regime turbulent etabli. Des rugosites du type 'interrupteur de couche limite' etaient realisees au moyen de filets triangulaires, de 0,2 a 0,4 mm de hauteur usines dans l'epaisseur du tube ou de fils de laiton, ou de verre, enroules sur un tube lisse. Les essais ont porte egalement sur des rugosites constituees par des pyramides de 0,4 mm de hauteur et regulierement espacees. Les resultats obtenus ont mis en evidence une augmentation de transfert de chaleur due a la presence des elements rugueux. L'existence d'un maximum pour les coefficients d'echange thermique et de perte de charge a ete constate lorsque le pas atteint huit fois la hauteur des rugosites. Une methode analytique a ete etablie et des experiences ont ete realisees au cours desquelles les deux parois de l

Genetic Variability, Correlation Studies and Path Coefficient Analysis in Gladiolus Alatus Cultivars

International Nuclear Information System (INIS)

Ramzan, A.; Nawab, N. N.; Tariq, M. S.; Ikram, S.; Ahad, A.

2016-01-01

A study was undertaken to find out the estimates of genetic variability, genetic parameters and character association among different flower traits between three gladiolus cultivars viz: Sancerre, Fado and Advanced Red. The experiment was repeated three times by using RCBD (Randomized complete block design) at Department of Horticulture, PMAS-UAAR, Rawalpindi. The highest genotypic coefficient variation (GCV) and phenotypic coefficient variation (PCV) magnitude was observed for spike length (16.00) and number of florets per spike (14.84) followed by number of leaves (10.00). Among the traits studied the highest heritability estimates was recorded in spike length (99.5 percent) followed by number of florets/spike (99.6 percent) and lowest in plant height (98.2 percent). The genetic advance as percent of mean was ranged from 2.8 percent to 24.75 percent. Genetic advance was highest for floret breadth (24.75 percent) and lowest for plant height (2.8 percent). High heritability combined with high genetic advance was noticed for number of florets per spike, spike length and floret breadth indicating additive gene action which suggested that improvement of these traits would be effective for further selection of superior genotypes. Plant height and number of florets per spike showed highly positive and significant association with spike length, number of leaves, leaf area, floret length and floret breadth while, spike length registered positive and significant correlation with number of leaves and floret breadth. The path coefficient analysis based on spike length, as responsible variable exposed that all of the traits exerted direct positive effect except leaf area and floret length. Spike length imparted maximum positive direct effect on the number of florets per spike. Hence, spike length and number of florets per spike may be considered for further improvement. However, Floret length and floret breadth may also be considered as a criterion for selection. (author)

Efecto del beneficiado de mezclas de variedades de arroz sobre variables de rendimiento molinero

Directory of Open Access Journals (Sweden)

Manuel Zeled\\u00F3n-Grau

2007-01-01

Full Text Available Efecto del beneficiado de mezclas de variedades de arroz sobre variables de rendimiento molinero. Con el fin de determinar si las variables de rendimiento molinero del arroz (rendimiento de molino, rendimiento de arroz co mer cial e ín di ce de pi la da se afec tan cuan do una va rie dad se be ne fi cia en mez cla con otras, en el Cen tro de In vestigacio nes en Gra nos y Se mi llas (CIGRAS se eva lua ron cua tro mez clas de las tres va rie da des más uti li za das en Cos ta Ri ca en la co se cha 1999-2000 (CR-1113, CR-5272 y Se te sa-9. Otras variables analizadas fueron los por centajes de: grano quebrado, grano quebrado grueso, puntilla, semolina (salvado de arroz, se mo li na pu ra y cas carilla en la semolina. Para cada variable se calculó un índice (Im que ex presa qué tanto el va lor ob te ni do se des vió del va lor esperado para cada una de las mez clas (es pe ra do = pro me dio de los re sultados individua les para cada variedad cuando se la pro cesó sin mezclar. No se encontraron diferencias significativas entre los índices de los tra ta mien tos eva lua dos. Sin em bar go, se ob ser vó un efecto detrimental en las variables de rendimiento molinero de las mez clas en que par ti ci pó CR 5272. Con tra rio a es to, la mezcla CR-1113-Setesa-9 mostró un efecto beneficioso. Los efectos detrimentales observados con el beneficiado de las mez clas fue ron atri bui dos a una ma yor pro duc ción que la esperada de puntilla y de pedazos muy pequeños de arroz en la se mo li na. Por su par te, en la mez cla en la que se re gis tró un efecto beneficioso hubo una menor producción que la esperada de se molina pura y de quebrado grueso. La pérdida económica que causaría la mezcla más perjudicial fue estimada en $ 1 por to ne la da mé tri ca.

Influence of the anisotropy of expansion coefficients on the elastic properties of uranium of zirconium and of zinc; Influence de l'anisotropie des coefficients de dilatation sur les proprietes elastiques de l'uranium du zirconium et du zinc

Energy Technology Data Exchange (ETDEWEB)

Calais, Daniel; Saada, Georges; Simenel, Nicole [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

1959-07-01

The anisotropy of the expansion coefficients of uranium, zirconium and zinc provoke internal tensions in the course of cooling these metals. These tensions are eliminated in the case of zinc by restoration to room temperature, but persist in uranium and zirconium and are responsible for the absence of an elastic limit in these two metals. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 1225-1227, sitting of 5 October 1959 [French] L'anisotropie des coefficients de dilatation de l'uranium, du zirconium et du zinc provoque au cours du refroidissement de ces metaux des tensions internes. Eliminees par restauration a la temperature ambiante dans le cas du zinc, ces tensions persistent pour l'uranium et le zirconium et sont responsable de l'absence de limite elastique dans ces deux metaux. Reproduction d'un article publie dans les Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 1225-1227, seance du 5 octobre 1959.

Determination of forces induced by steam flow in turbines; Determinacion de fuerzas inducidas por flujo de vapor en turbinas

Energy Technology Data Exchange (ETDEWEB)

Garcia Castrejon, Juan Carlos

2008-09-15

blades, has a harmonic pattern. The pressure field variation as time function is uniform: the peaks and valleys across the axial clearance are always in phase. However the instant picture of the pressure field it's different: the peaks and valleys are not in phase and the number of peaks and valley changed across the clearance. In the case of the forces acting on blades, a Fourier on the forces calculated was used to determine the coefficients and frequency of a Fourier equation which can be used to calculate the alternating stresses on the blade in order to predict the useful life blades. [Spanish] Las vibraciones inducidas por flujo de vapor en turbinas representan uno de los problemas que enfrenta la operacion de turbinas de vapor cuya capacidad rebasa los 300 MW. Ademas estas constituyen uno de los limites tecnologicos para el desarrollo de turbinas de vapor de mas de 1 GW. Este tipo de fenomeno tiene su origen en la interaccion del rotor con el fluido que se encuentra en sus proximidades. El flujo de vapor dentro de la turbina es complejo, ya que es turbulento e inestable. A medida que el flujo pasa una etapa de estator o de rotor, se generan secundarios, vortices en los filos de salida, estelas con caracteristicas de flujo diferentes al flujo principal en los pasajes. Estas variaciones en el flujo son las que inducen vibraciones forzadas en los alabes. Ademas existen varios factores que contribuyen a la aplicacion de vibraciones en alabes inducidas por flujo como son: inestabilidad del flujo de vapor en los claros de los sellos, secuencia de apertura de las valvulas, estelas de las toberas, obstrucciones en algunas de las toberas y diferente espaciamiento en las toberas. Las vibraciones por flujo pueden ser peligrosas si su frecuencia coincide con la frecuencia natural del sistema, provocando efectos mas nocivos que las vibraciones por desbalance o por desalineamiento, pues tienen amplitudes mas grandes y provocan esfuerzos alternantes en los componentes del

Changes of interannual NAO variability in response to greenhouse gases forcing

Energy Technology Data Exchange (ETDEWEB)

Dong, Buwen; Sutton, Rowan T.; Woollings, Tim [University of Reading, National Centre for Atmospheric Science, Department of Meteorology, Reading (United Kingdom)

2011-10-15

Observations show that there was change in interannual North Atlantic Oscillation (NAO) variability in the mid-1970s. This change was characterized by an eastward shift of the NAO action centres, a poleward shift of zonal wind anomalies and a downstream extension of climate anomalies associated with the NAO. The NAO interannual variability for the period after the mid-1970s has an annular mode structure that penetrates deeply into the stratosphere, indicating a strengthened relationship between the NAO and the Arctic Oscillation (AO) and strengthened stratosphere-troposphere coupling. In this study we have investigated possible causes of these changes in the NAO by carrying out experiments with an atmospheric GCM. The model is forced either by doubling CO{sub 2}, or increasing sea surface temperatures (SST), or both. In the case of SST forcing the SST anomaly is derived from a coupled model simulation forced by increasing CO{sub 2}. Results indicate that SST and CO{sub 2} change both force a poleward and eastward shift in the pattern of interannual NAO variability and the associated poleward shift of zonal wind anomalies, similar to the observations. The effect of SST change can be understood in terms of mean changes in the troposphere. The direct effect of CO{sub 2} change, in contrast, can not be understood in terms of mean changes in the troposphere. However, there is a significant response in the stratosphere, characterized by a strengthened climatological polar vortex with strongly enhanced interannual variability. In this case, the NAO interannual variability has a strong link with the variability over the North Pacific, as in the annular AO pattern, and is also strongly related to the stratospheric vortex, indicating strengthened stratosphere-troposphere coupling. The similarity of changes in many characteristics of NAO interannual variability between the model response to doubling CO{sub 2} and those in observations in the mid-1970s implies that the

On Solutions for Linear and Nonlinear Schrödinger Equations with Variable Coefficients: A Computational Approach

Directory of Open Access Journals (Sweden)

Gabriel Amador

2016-05-01

Full Text Available In this work, after reviewing two different ways to solve Riccati systems, we are able to present an extensive list of families of integrable nonlinear Schrödinger (NLS equations with variable coefficients. Using Riccati equations and similarity transformations, we are able to reduce them to the standard NLS models. Consequently, we can construct bright-, dark- and Peregrine-type soliton solutions for NLS with variable coefficients. As an important application of solutions for the Riccati equation with parameters, by means of computer algebra systems, it is shown that the parameters change the dynamics of the solutions. Finally, we test numerical approximations for the inhomogeneous paraxial wave equation by the Crank-Nicolson scheme with analytical solutions found using Riccati systems. These solutions include oscillating laser beams and Laguerre and Gaussian beams.

Cutting forces during turning with variable depth of cut

Directory of Open Access Journals (Sweden)

M. Sadílek

2016-03-01

The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

Behaviour of the extended Toda lattice

Science.gov (United States)

Wattis, Jonathan A. D.; Gordoa, Pilar R.; Pickering, Andrew

2015-11-01

We consider the first member of an extended Toda lattice hierarchy. This system of equations is differential with respect to one independent variable and differential-delay with respect to a second independent variable. We use asymptotic analysis to consider the long wavelength limits of the system. By considering various magnitudes for the parameters involved, we derive reduced equations related to the Korteweg-de Vries and potential Boussinesq equations.

Stabilization of wave equations with variable coefficient and delay in the dynamical boundary feedback

Directory of Open Access Journals (Sweden)

Dandan Guo

2017-08-01

Full Text Available In this article we consider the boundary stabilization of a wave equation with variable coefficients. This equation has an acceleration term and a delayed velocity term on the boundary. Under suitable geometric conditions, we obtain the exponential decay for the solutions. Our proof relies on the geometric multiplier method and the Lyapunov approach.

The general formulation and practical calculation of the diffusion coefficient in a lattice containing cavities; Formulation generale et calcul pratique du coefficient de diffusion dans un reseau comportant des cavites

Energy Technology Data Exchange (ETDEWEB)

Benoist, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

The calculation of diffusion coefficients in a lattice necessitates the knowledge of a correct method of weighting the free paths of the different constituents. An unambiguous definition of this weighting method is given here, based on the calculation of leakages from a zone of a reactor. The formulation obtained, which is both simple and general, reduces the calculation of diffusion coefficients to that of collision probabilities in the different media; it reveals in the expression for the radial coefficient the series of the terms of angular correlation (cross terms) recently shown by several authors. This formulation is then used to calculate the practical case of a classical type of lattice composed of a moderator and a fuel element surrounded by an empty space. Analytical and numerical comparison of the expressions obtained with those inferred from the theory of BEHRENS shows up the importance of several new terms some of which are linked with the transparency of the fuel element. Cross terms up to the second order are evaluated. A practical formulary is given at the end of the paper. (author) [French] Le calcul des coefficients de diffusion dans un reseau suppose la connaissance d'un mode de ponderation correct des libres parcours des differents constituants. On definit ici sans ambiguite ce mode de ponderation a partir du calcul des fuites hors d'une zone de reacteur. La formulation obtenue, simple et generale, ramene le calcul des coefficients de diffusion a celui des probabilites de collision dans les differents milieux; elle fait apparaitre dans l'expression du coefficient radial la serie des termes de correlation angulaire (termes rectangles), mis en evidence recemment par plusieurs auteurs. Cette formulation est ensuite appliquee au calcul pratique d'un reseau classique, compose d'un moderateur et d'un element combustible entoure d'une cavite; la comparaison analytique et numerique des expressions obtenues avec celles deduites de la theorie de BEHRENS

Measurements and Application of Partition Coefficients of Compounds Suitable for Tracing Gas Injected Into Oil Reservoirs Mesures et applications des coefficients de partage de composants utilisables comme gaz traceurs injectés dans des réservoirs de pétrole

Directory of Open Access Journals (Sweden)

Dugstad O.

2006-11-01

Full Text Available Tracing of injection gas in oil reservoirs is a technique used to improve the description of permeability distributions in situ. Results from dynamic laboratory experiments of gas tracers are reported. Gas tracers are delayed when flooding through a reservoir by the partitioning into the oil phase. A knowledge of this effect is important to optimize the interpretation of field tracer tests. The partition is quantified by the partition coefficient K. Two chemical tracers perfluoromethylcyclopentane (PMCP and perfluoromethylcyclohexane (PMCH and the radioactive 14C labelled ethane have been studied here. The two chemical compounds are new as reservoir tracers and no field results with these tracers are reported in the open literature. Our group has, however, recently applied these compound successfully as tracers in a North Sea reservoir. Les traceurs représentent un outil précieux pour améliorer la description des gisements. On les a utilisés pour obtenir des renseignements sur la configuration de l'écoulement des fluides injectés et sur leur vitesse, sur l'instant de percé des venues d'eau et sur leur origine précise, sur les traitements d'amélioration du balayage, sur les hétérogénéités importantes telles que fractures, barrières d'écoulement et stratifications de la perméabilité. Dans les gisements importants comportant plusieurs puits de production et plusieurs puits d'injection, il est donc souhaitable de disposer de plusieurs traceurs afin de pouvoir injecter différents traceurs ou mélanges de traceurs dans les différents puits. L'article présenté ici est une contribution a l'effort fait pour étendre le nombre de gaz traceurs fiables applicables aux gisements. L'article présente les résultats d'essais dynamiques en laboratoires dans lesquels on injecte des traceurs à travers un milieu poreux. Lorsqu'ils traversent un réservoir, les gaz traceurs sont retardés du fait de leur ségrégation dans la phase huile. La

Genetic variability in common wheat germplasm based on coefficients of parentage

Directory of Open Access Journals (Sweden)

Fernanda Bered

2002-01-01

Full Text Available The characterization of genetic variability and an estimate of the genetic relationship among varieties are essential to any breeding program, because artificial crosses among less similar parents allow a larger segregation and the combination of different favorable alleles. Genetic variability can be evaluated in different ways, including the Coefficient of Parentage (COP, which estimates the probability of two alleles in two different individuals being identical by descent. In this study, we evaluated the degree of genetic relationship among 53 wheat genotypes, and identified the ancestor genotypes which contributed the most to the current wheat germplasm, as a prediction of the width of the genetic base of this cereal. The results revealed a mean COP of 0.07 and the formation of 22 similarity groups. The ancestor genotypes Ciano 67 and Mentana were those which contributed the most to the current wheat germplasm. According to the COP analyses, the genetic base of wheat rests on a small number of ancestral genotypes.

Niveles y efectos de la consanguinidad en variables de comportamiento durante la tienta y la lidia en dos ganaderías de reses bravas de Colombia Levels and effects of inbreeding on performance traits during tempt and fight from two fighting bull farms in Colombia

Directory of Open Access Journals (Sweden)

David Calero Quintero

2010-04-01

Full Text Available En el estudio se estimaron los niveles y las tendencias de la consanguinidad en variables de comportamiento durante la tienta y la lidia en dos ganaderías colombianas de reses bravas: Ernesto González Caicedo (EGC - Popayán, Cauca, encaste Santacoloma; y Guachicono (GUA - Bolívar, Cauca, Colombia, encaste Parladé. Se analizaron los pedigríes de 2.094 animales EGC nacidos entre 1918 y 2007 y 963 GUA, nacidos entre 1928 y 2005. Los coeficientes de consanguinidad de los bovinos se obtuvieron usando el Proc Inbreed del programa SAS v. 9.1.3. Se estudiaron además de las notas del ganadero, las variables propias y comunes a las faenas de tienta y de lidia. Los promedios y las desviaciones estándar de la consanguinidad en EGC y GUA fueron 4.9±6.6 y 4.2±4.2% para todos los animales, 4.5±5.8 y 6.0±3.4% para la última época estudiada, y 10.6±5.8 y 6.5±3.5% considerando sólo los consanguíneos. Se encontraron efectos positivos en las variables responsables de ‘toreabilidad’ y estilo, y depresivos en la fuerza de los animales. La consanguinidad actual en ambas ganaderías es mediana, sin embargo debe diseñarse un plan de apareamiento.This study was carried out to estimate levels and trends of the inbreeding on behavior variables during the tempt and fight from two fighting farms: Ernesto González Caicedo (EGC and Guachicono (GUA with strains Santacoloma, and Parladé respectively, located on Popayán and Bolívar, municipalities of the Cauca Department, Colombia. The pedigrees of 2094 EGC animals born between 1918 and 2007, and 963 GUA animals born between 1928 and 2005 were analyzed. Inbreeding coefficients of the cattle were obtained using PROC INBREED from the software SAS v. 9.1.3. In addition to the breeder’s notes the own variables, dealing and common to the tempt and fight task were studied. The average and standard deviations of the blood relationship during the total and the last time studied for the cattle raising EGC and

Uni-directional waves over slowly varying bottom, part II: Deformation of travelling waves

NARCIS (Netherlands)

Pudjaprasetya, S.R.; Pudjaprasetya, S.R.; van Groesen, Embrecht W.C.

1996-01-01

A new Korteweg-de Vries type of equation for uni-directional waves over slowly varying bottom has been derived in Part I. The equation retains the Hamiltonian structure of the underlying complete set of equations for surface waves. For flat bottom it reduces to the standard Korteweg-de Vries

On "new travelling wave solutions" of the KdV and the KdV-Burgers equations

NARCIS (Netherlands)

Kudryashov, Nikolai A.

The Korteweg-de Vries and the Korteweg-de Vries-Burgers equations are considered. Using the travelling wave the general solutions of these equations are presented. "New travelling wave solutions" of the KdV and the KdV-Burgers equations by Wazzan [Wazzan L Commun Nonlinear Sci Numer Simulat

Theoretical study to determine the heat transfer by forced convection coefficient in an empirical correlation in single phase, for annular channels

International Nuclear Information System (INIS)

Herrera A, E.

1994-01-01

In the heat transfer studies by forced convection, we have few data about behavior of the fluids in an annular channel heated by a concentric pipe, such date is necessary to know the heat transfer coefficient that establish the interchange of energy and the thermic properties of the fluid with the geometry of the flow. In this work the objective, was to compare some empirical correlations that we needed for determinate the heat transfer coefficient for annular channels, where we obtained similar at the theoretical results of an experiment made by Miller and Benforado. It is important to know such coefficients because we can determinate the heat quantity transmitted to a probe zone, in which we simulate a nuclear fuel element that developed huge heat quantity that must be dispersed in short time. We give theoretical data of the heat forced transfer convection and we analyzed the phenomena in annular channels given some empirical correlations employed by some investigators and we analyzed each one. (Author)

RADIAL FORCE IMPACT ON THE FRICTION COEFFICIENT AND TEMPERATURE OF A SELF-LUBRICATING PLAIN BEARING

Directory of Open Access Journals (Sweden)

Nada Bojić

2017-12-01

Full Text Available Self-lubricating bearings are available in spherical, plain, flanged journal, and rod end bearing configurations. They were originally developed to eliminate the need for re-lubrication, to provide lower torque and to solve application problems where the conventional metal-to-metal bearings would not perform satisfactorily, for instance, in the presence of high frequency vibrations. Among the dominant tribological parameters of the self-lubricating bearing, two could be singled out: the coefficient of friction and temperature. To determine these parameters, an experimental method was applied in this paper. By using this method, the coefficient of friction and temperature were identified and their correlation was established. The aim of this research was to determine the effect of radial force on tribological parameters in order to predict the behavior of sliding bearings with graphite in real operating conditions.

Modelo competitivo de variables jerárquicas de empresas exportadoras

Directory of Open Access Journals (Sweden)

Joel Bonales Valencia

2016-03-01

Full Text Available el objetivo de esta ponencia es describir la competitividad de empresas exportadoras del sector aguacatero, mostrando sus problemáticas, organización, objetivos, producción, y la capacidad de exportar de manera eficiente a Estados Unidos. Se considera el estudio de la competitividad de 25 empresas exportadoras de aguacate, con información de su organización, sus objetivos, su producción y la capacidad de exportar de manera eficiente. La investigación documental se enfocó en el conocimiento de las principales teorías sobre la competitividad empresarial y obtener como resultado su conceptualización y la medición de las variables que lo afectan. la técnica de jerarquización analítica se utiliza para evaluar la importancia de los problemas planteados y las causas del mismo. el método consiste en realizar comparaciones por pares entre cada una de las alternativas, que en este caso son variables, y por medio de una escala previamente específica se evalúan las magnitudes de preferencia.

Variability in Cadence During Forced Cycling Predicts Motor Improvement in Individuals With Parkinson’s Disease

Science.gov (United States)

Ridgel, Angela L.; Abdar, Hassan Mohammadi; Alberts, Jay L.; Discenzo, Fred M.; Loparo, Kenneth A.

2014-01-01

Variability in severity and progression of Parkinson’s disease symptoms makes it challenging to design therapy interventions that provide maximal benefit. Previous studies showed that forced cycling, at greater pedaling rates, results in greater improvements in motor function than voluntary cycling. The precise mechanism for differences in function following exercise is unknown. We examined the complexity of biomechanical and physiological features of forced and voluntary cycling and correlated these features to improvements in motor function as measured by the Unified Parkinson’s Disease Rating Scale (UPDRS). Heart rate, cadence, and power were analyzed using entropy signal processing techniques. Pattern variability in heart rate and power were greater in the voluntary group when compared to forced group. In contrast, variability in cadence was higher during forced cycling. UPDRS Motor III scores predicted from the pattern variability data were highly correlated to measured scores in the forced group. This study shows how time series analysis methods of biomechanical and physiological parameters of exercise can be used to predict improvements in motor function. This knowledge will be important in the development of optimal exercise-based rehabilitation programs for Parkinson’s disease. PMID:23144045

Multi-soliton solutions to the modified nonlinear Schrödinger equation with variable coefficients in inhomogeneous fibers

International Nuclear Information System (INIS)

Dai, Chao-Qing; Qin, Zhen-Yun; Zheng, Chun-Long

2012-01-01

Multi-soliton solutions to the modified nonlinear Schrödinger equation (MNLSE) with variable coefficients (VCs) in inhomogeneous fibers are obtained with the help of mapping transformation, which reduces the VC MNLSE into a constant-coefficient MNLSE. Based on the analytical solutions, one- and two-soliton transmissions in the proper dispersion management systems are discussed. The sustainment of solitons and the disappearance of breathers for the VC MNLSE are first reported here. (paper)

Measurement of condensation heat transfer coefficients in a steam chamber using a variable conductance heat pipe

International Nuclear Information System (INIS)

Robinson, J.A.; Windebank, S.R.

1988-01-01

Condensation heat transfer coefficients have been measured in a pressurised chamber containing a mixture of saturated steam and air. They were determined as a function of the air-steam ratio in nominally stagnant conditions. The effect of pressure is assessed and preliminary measurements with a forced convective component of velocity are presented. A novel measurement technique was adopted, namely to use a vertical heat pipe whose conductance could easily be varied. It transported heat from an evaporator located inside the chamber to a condenser section outside, at which the heat flow was measured. Heat flux at the evaporator could then be determined and a condensation heat transfer coefficient derived. The range of coefficients covered was from 150 W/m 2 0 K at high air-steam ratios to 20,000 W/m 2 0 K in pure steam. Results show that increasing either total pressure or velocity enhances condensation heat transfer over the range of air/steam ratios considered. (author)

Linear Coefficient of Thermal Expansion of Porous Anodic Alumina Thin Films from Atomic Force Microscopy

OpenAIRE

Zhang, Richard X; Fisher, Timothy; Raman, Arvind; Sands, Timothy D

2009-01-01

In this article, a precise and convenient technique based on the atomic force microscope (AFM) is developed to measure the linear coefficient of thermal expansion of a porous anodic alumina thin film. A stage was used to heat the sample from room temperature up to 450 K. Thermal effects on AFM probes and different operation modes at elevated temperatures were also studied, and a silicon AFM probe in the tapping mode was chosen for the subsequent measurements due to its temperature insensitivi...

Las variables emocionales como factores de riesgo de los trastornos de la conducta alimentaria

Directory of Open Access Journals (Sweden)

Aitziber Pascual

2011-01-01

Full Text Available Este estudio ex post facto analizó si determinadas variables emocionales pueden considerarse factores de riesgo de los trastornos de la conducta alimentaria (TCA. Se analizaron las siguientes variables: ansiedad-rasgo, dificultad para identificar y expresar las emociones (alexitimia, autoestima, actitud negativa hacia la expresión emocional, percepción negativa de las emociones, influuencia de la alimentación, el peso y la figura corporal en el estado de ánimo, necesidad de control y estrategias de afrontamiento. Participaron 368 mujeres: 78 con TCA, 145 en riesgo de TCA y 145 de un grupo de control normativo. La variable que mostró mayor capacidad discriminante de todos los tipos de riesgo frente al grupo de control fue la relativa a la influencia en el estado de ánimo. Asimismo, la baja autoestima mostró buena capacidad para discriminar el riesgo de purga/atracón, y el riesgo de anorexia y purga/atracón frente al grupo control; a su vez, las formas de afrontamiento acción impulsiva y expresión emocional mostraron buena capacidad para discriminar el riesgo de anorexia del grupo control. Estos resultados tienen implicaciones importantes tanto en el área de la evaluación como en el de la prevención de estos trastornos.

Visuomotor contribution to force variability in the plantarflexor and dorsiflexor muscles

OpenAIRE

Tracy, Brian L.

2007-01-01

The visual correction employed during isometric contractions of large proximal muscles contributes variability to the descending command and alters fluctuations in muscle force. This study explored the contribution of visuomotor correction to isometric force fluctuations for the more distal dorsiflexor (DF) and plantarflexor (PF) muscles of the ankle. Twenty-one healthy adults performed steady isometric contractions with the DF and PF muscles both with (VIS) and without (NOVIS) visual feedbac...

Study and development of an optical method for the measurement of convection coefficients; Etude et developpement d'une methode optique pour la mesure du coefficient de convection

Energy Technology Data Exchange (ETDEWEB)

Crowther, David J.

1990-03-06

This research thesis addresses the field of fluid-wall thermal exchanges in which the notion of exchange coefficient is notably useful to design, size and optimise devices. A first part reports a bibliographical study which gives an overview of solutions envisaged to determine the convection coefficient in permanent regime with the use of flow sensors, as well as in transient regime. Then, the author reports the development of an unsteady method which is based on the analysis of the cooling kinetics of the front face of a convecting wall, after a unique energetic perturbation (an infinitely brief pulse, or a finite duration energy step). This method is applied to the general case (wall with finite thickness) and to the case of a semi-infinite wall which is typical of materials which are weak thermal conductors. This is extended to the case of good thermal conductors by considering a thermally thin wall. After a detailed description of the experimental bench, above-mentioned solutions are applied to insulating and good thermal conducting materials. In order to validate results of an analysis in transient regime, they are compared with measurements performed in permanent regime with a flow-metering technique. The study of the principle of the dissipation-based flow sensor, and its operation are reported. Experimental results are presented for both methods (pulse and flow sensor), and compared in order to highlight the interest of the unsteady method [French] Difficile a mesurer, le coefficient de convection reste cependant une grandeur necessaire au calcul et a l'optimisation de tout systeme thermique. L'amelioration des capteurs thermiques permet aujourd'hui de concevoir une methode optique, utilisable a distance, et non destructive. Nous proposons dans ce but, un procede de mesure en regime transitoire base sur la radiometrie photothermique impulsionnelle. L'analyse du regime de relaxation d'une paroi, apres une brusque elevation de temperature, permet de remonter

Orbital Forcing driving climate variability on Tropical South Atlantic

Science.gov (United States)

Oliveira, A. S.; Baker, P. A.; Silva, C. G.; Dwyer, G. S.; Chiessi, C. M.; Rigsby, C. A.; Ferreira, F.

2017-12-01

Past research on climate response to orbital forcing in tropical South America has emphasized on high precession cycles influencing low latitude hydrologic cycles, and driving the meridional migration of Intertropical Convergence Zone (ITCZ).However, marine proxy records from the tropical Pacific Ocean showed a strong 41-ka periodicities in Pleistocene seawater temperature and productivity related to fluctuations in Earth's obliquity. It Indicates that the western Pacific ITCZ migration was influenced by combined precession and obliquity changes. To reconstruct different climate regimes over the continent and understand the orbital cycle forcing over Tropical South America climate, hydrological reconstruction have been undertaken on sediment cores located on the Brazilian continental slope, representing the past 1.6 million years. Core CDH 79 site is located on a 2345 m deep seamount on the northern Brazilian continental slope (00° 39.6853' N, 44° 20.7723' W), 320 km from modern coastline of the Maranhão Gulf. High-resolution XRF analyses of Fe, Ti, K and Ca are used to define the changes in precipitation and sedimentary input history of Tropical South America. The response of the hydrology cycle to orbital forcing was studied using spectral analysis.The 1600 ka records of dry/wet conditions presented here indicates that orbital time-scale climate change has been a dominant feature of tropical climate. We conclude that the observed oscillation reflects variability in the ITCZ activity associated with the Earth's tilt. The prevalence of the eccentricity and obliquity signals in continental hydrology proxies (Ti/Ca and Fe/K) as implicated in our precipitation records, highlights that these orbital forcings play an important role in tropics hydrologic cycles. Throughout the Quaternary abrupt shifts of tropical variability are temporally correlated with abrupt climate changes and atmospheric reorganization during Mid-Pleistocene Transition and Mid-Brunhes Events

Spatial variability of aggregate stability in latosols under sugarcane Variabilidade espacial da estabilidade de agregados em latossolos sob cultivo de cana-de-açúcar

Directory of Open Access Journals (Sweden)

Zigomar Menezes de Souza

2009-04-01

Full Text Available The spatial variability of soils under a same management system is differentiated, as expressed in the properties. The spatial variability of aggregate stability of a eutrophic Red Latosol (ERL and a dystrophic Red Latosol (DRL under sugarcane was characterized. Samples were collected in a regular 10 m grid, in the layers 0.0-0.2 and 0.2-0.4 m, with 100 points per area, and the following properties were determined: geometric mean diameter (GMD of aggregates, mean weight diameter (MWD of aggregates, percent of aggregates in the > 2.0 mm class and organic matter (OM content. The eutrophic Red Latosol (ERL had a higher aggregate stability thn the dystrophic Red Latosol (DRL, which may be attributed to the higher clay and OM content and the gibbsitic mineralogy of this soil class. The differentiated evolution of the studied Oxisols explains the wider range and lower variation coefficient and variability, for all properties studied in the eutrophic Red Latosol.Solos submetidos ao mesmo sistema de manejo manifestam variabilidade espacial diferenciada de seus atributos. A variabilidade espacial da estabilidade de agregados foi caracterizada em um Latossolo Vermelho distrófico e Latossolo Vermelho eutroférrico, sob cultivo de cana-de-açúcar. Foram realizadas amostragens de terra nos pontos de interseção de uma malha de 10 x 10 linhas, espaçadas de 10 m, totalizando 100 pontos de amostragem por área, coletadas nas camadas de 0,0-0,2 e 0,2-0,4 m de profundidade, para determinação de diâmetro médio geométrico (DMG, diâmetro médio ponderado (DMP, agregados na classe >2,0 mm e teor de matéria orgânica do solo. O Latossolo Vermelho eutroférrico apresenta maior estabilidade de agregados quando comparado com o Latossolo Vermelho distrófico, condizente com o maior teor de argila, matéria orgânica e mineralogia gibbsítica. A evolução diferenciada dos Latossolos estudados explica os maiores alcances, o menor coeficiente de variação (CV e

Regression Models for Predicting Force Coefficients of Aerofoils

Directory of Open Access Journals (Sweden)

Mohammed ABDUL AKBAR

2015-09-01

Full Text Available Renewable sources of energy are attractive and advantageous in a lot of different ways. Among the renewable energy sources, wind energy is the fastest growing type. Among wind energy converters, Vertical axis wind turbines (VAWTs have received renewed interest in the past decade due to some of the advantages they possess over their horizontal axis counterparts. VAWTs have evolved into complex 3-D shapes. A key component in predicting the output of VAWTs through analytical studies is obtaining the values of lift and drag coefficients which is a function of shape of the aerofoil, ‘angle of attack’ of wind and Reynolds’s number of flow. Sandia National Laboratories have carried out extensive experiments on aerofoils for the Reynolds number in the range of those experienced by VAWTs. The volume of experimental data thus obtained is huge. The current paper discusses three Regression analysis models developed wherein lift and drag coefficients can be found out using simple formula without having to deal with the bulk of the data. Drag coefficients and Lift coefficients were being successfully estimated by regression models with R2 values as high as 0.98.

An experiment for Shuttle aerodynamic force coefficient determination from inflight dynamical and atmospheric measurements

Science.gov (United States)

Compton, H. R.; Blanchard, R. C.; Walberg, G. D.

1978-01-01

A two-phase experiment is proposed which utilizes the Shuttle Orbiter and its unique series of repeated entries into the earth's atmosphere as an airborne in situ aerodynamic testing laboratory. The objective of the experiment is to determine static aerodynamic force coefficients, first of the orbiter, and later of various entry configurations throughout the high speed flight regime, including the transition from free molecule to continuum fluid flow. The objective will be accomplished through analysis of inflight measurements from both shuttle-borne and shuttle-launched instrumented packages. Results are presented to demonstrate the feasibility of such an experiment.

Countermovement jump height: gender and sport-specific differences in the force-time variables.

Science.gov (United States)

Laffaye, Guillaume; Wagner, Phillip P; Tombleson, Tom I L

2014-04-01

The goal of this study was to assess (a) the eccentric rate of force development, the concentric force, and selected time variables on vertical performance during countermovement jump, (b) the existence of gender differences in these variables, and (c) the sport-specific differences. The sample was composed of 189 males and 84 females, all elite athletes involved in college and professional sports (primarily football, basketball, baseball, and volleyball). The subjects performed a series of 6 countermovement jumps on a force plate (500 Hz). Average eccentric rate of force development (ECC-RFD), total time (TIME), eccentric time (ECC-T), Ratio between eccentric and total time (ECC-T:T) and average force (CON-F) were extracted from force-time curves and the vertical jumping performance, measured by impulse momentum. Results show that CON-F (r = 0.57; p differ between both sexes (p differ, showing a similar temporal structure. The best way to jump high is to increase CON-F and ECC-RFD thus minimizing the ECC-T. Principal component analysis (PCA) accounted for 76.8% of the JH variance and revealed that JH is predicted by a temporal and a force component. Furthermore, the PCA comparison made among athletes revealed sport-specific signatures: volleyball players revealed a temporal-prevailing profile, a weak-force with large ECC-T:T for basketball players and explosive and powerful profiles for football and baseball players.

Global stability of almost periodic solution of shunting inhibitory cellular neural networks with variable coefficients

International Nuclear Information System (INIS)

Chen Ling; Zhao Hongyong

2008-01-01

The paper investigates the almost periodicity of shunting inhibitory cellular neural networks with delays and variable coefficients. Several sufficient conditions are established for the existence and globally exponential stability of almost periodic solutions by employing fixed point theorem and differential inequality technique. The results of this paper are new and they complement previously known results

Plantas desaladoras: problemas de régimen variable

OpenAIRE

Laguna Peñuelas, Francisco; Sánchez Calvo, Raúl; Juana Sirgado, Luis; Rodríguez Sinobas, Leonor; Castañon Lion, Guillermo; Gil Rodríguez, María; Losada Villasante, Alberto

2009-01-01

Las plantas desaladoras cuentan con un circuito hidráulico con varios bombeos y en el que las maniobras de apertura y cierre de llaves para limpieza de filtros son frecuentes. En ocasiones, el régimen variable producido por maniobras de llaves o por parada de bombas ha causado daños estructurales en los filtros. Mediante modelación matemática se ha analizado el régimen variable para diferentes hipótesis. Se concluye que los propios filtros atenúan los efectos de golpe de ariete y que, a...

Breather management in the derivative nonlinear Schrödinger equation with variable coefficients

Energy Technology Data Exchange (ETDEWEB)

Zhong, Wei-Ping, E-mail: zhongwp6@126.com [Department of Electronic and Information Engineering, Shunde Polytechnic, Guangdong Province, Shunde 528300 (China); Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar); Belić, Milivoj [Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar); Malomed, Boris A. [Department of Physical Electronics, School of Electrical Engineering, Faculty of Engineering, Tel Aviv University, Tel Aviv 69978 (Israel); Huang, Tingwen [Texas A& M University at Qatar, P.O. Box 23874 Doha (Qatar)

2015-04-15

We investigate breather solutions of the generalized derivative nonlinear Schrödinger (DNLS) equation with variable coefficients, which is used in the description of femtosecond optical pulses in inhomogeneous media. The solutions are constructed by means of the similarity transformation, which reduces a particular form of the generalized DNLS equation into the standard one, with constant coefficients. Examples of bright and dark breathers of different orders, that ride on finite backgrounds and may be related to rogue waves, are presented. - Highlights: • Exact solutions of a generalized derivative NLS equation are obtained. • The solutions are produced by means of a transformation to the usual integrable equation. • The validity of the solutions is verified by comparing them to numerical counterparts. • Stability of the solutions is checked by means of direct simulations. • The model applies to the propagation of ultrashort pulses in optical media.

Characteristic study of head-on collision of dust-ion acoustic solitons of opposite polarity with kappa distributed electrons

Science.gov (United States)

Parveen, Shahida; Mahmood, Shahzad; Adnan, Muhammad; Qamar, Anisa

2016-09-01

The head on collision between two dust ion acoustic (DIA) solitary waves, propagating in opposite directions, is studied in an unmagnetized plasma constituting adiabatic ions, static dust charged (positively/negatively) grains, and non-inertial kappa distributed electrons. In the linear limit, the dispersion relation of the dust ion acoustic (DIA) solitary wave is obtained using the Fourier analysis. For studying characteristic head-on collision of DIA solitons, the extended Poincaré-Lighthill-Kuo method is employed to obtain Korteweg-de Vries (KdV) equations with quadratic nonlinearities and investigated the phase shifts in their trajectories after the interaction. It is revealed that only compressive solitary waves can exist for the positive dust charged concentrations while for negative dust charge concentrations both the compressive and rarefactive solitons can propagate in such dusty plasma. It is found that for specific sets of plasma parameters, the coefficient of nonlinearity disappears in the KdV equation for the negative dust charged grains. Therefore, the modified Korteweg-de Vries (mKdV) equations with cubic nonlinearity coefficient, and their corresponding phase shift and trajectories, are also derived for negative dust charged grains plasma at critical composition. The effects of different plasma parameters such as superthermality, concentration of positively/negatively static dust charged grains, and ion to electron temperature ratio on the colliding soliton profiles and their corresponding phase shifts are parametrically examined.

New Soliton-like Solutions and Multi-soliton Structures for Broer-Kaup System with Variable Coefficients

International Nuclear Information System (INIS)

Ji Mingjun; Lue Zhuosheng

2005-01-01

By using the further extended tanh method [Phys. Lett. A 307 (2003) 269; Chaos, Solitons and Fractals 17 (2003) 669] to the Broer-Kaup system with variable coefficients, abundant new soliton-like solutions and multi-soliton-like solutions are derived. Based on the derived multi-soliton-like solutions which contain arbitrary functions, some interesting multi-soliton structures are revealed.

Determinación experimental de los coeficientes locales de transporte de humedad en almacenes soterrados. // Experimental determination of local humidity transport coefficients in underground warehouses.

Directory of Open Access Journals (Sweden)

Ma. D. Andrade Gregori

2006-05-01

Full Text Available En el trabajo se fundamentan los mecanismos de transporte de humedad que tienen lugar en almacenes soterrados dadas lascaracterísticas climáticas y geohidrològicas de Cuba. Se establece una analogía con la ley de Fick y se propone un modeloteórico que describe este mecanismo de transporte hacia las cavidades. Se determinó experimentalmente los coeficienteslocales de transporte de humedad para diferentes tipos de recubrimiento en paredes y diferentes formas geométricas de losalmacenes.Palabras claves: Almacenes, soterrado, humedad, conservación, coeficientes._______________________________________________________________________________Abstract.In this paper the mechanisms of humidity transport are explained. These mechanisms have place in underground warehousesaccording to the climatic and geohydrological characteristics of Cuba. An analogy with the Fick´s law is stated and it intends atheoretical model that describes this mechanism of transport toward the cavities. It was determined the local coefficients oftransport of humidity experimentally for different recover types in walls and different geometric forms of the warehouses.Key words: Store, buried, humidity, conservation, and coefficients.

Relationship between variability of practice and variability of execution in flat tennis service Relación entre variabilidad de la práctica y variabilidad en la ejecución del servicio plano en tenis

Directory of Open Access Journals (Sweden)

R. Menayo

2010-12-01

Full Text Available This study analyzes the relationship between the variability in the performance of the flat tennis service and its practice under variable conditions, taking as a starting point a predictive analysis of the instantaneous kinematic variables of the hand that holds the racket. Seventeen tennis players performed services under 8 practice conditions (rackets and balls were modified, and pre-test and post-test were carried out. The players performed 120 services with the instruction to hit the ball powerfully and maintaining maximum efficiency. Data showed that two variables related to the speed and the acceleration of the hand will predict efficacy at 57.7%: both the time variation coefficients until we reach the speed peak and the final acceleration of the hand in the Y axis. Significant differences were also obtained between some instantaneous kinematic variables measured in the pre-test and the practice series, and also negative and significant correlations between these variables and the efficacy of the services.
Key Words: variability, tennis, service

Este estudio investiga acerca de la relación existente entre la variabilidad en la ejecución del servicio plano en tenis y la práctica variable del mismo, partiendo de un análisis predictivo de las variables cinemáticas instantáneas que definen el movimiento de la mano que sujeta la raqueta. 17 tenistas pasaron por 8 condiciones de práctica precedidas de un test inicial y finalizadas con un test final. En dichas series se variaron el implemento utilizado y la pelota. Cada jugador realizó 120 golpeos, con la instrucción de golpear a la máxima potencia manteniendo la eficacia. Los datos obtenidos identifican como variables predictoras de la eficacia en un 57.7 % a dos parámetros relacionados con la velocidad y con la aceleración de la mano: los coeficientes de variación del tiempo hasta el pico de velocidad lineal de la mano en el eje Y y la aceleraci

Ion-acoustic solitons in a plasma with electron beam

International Nuclear Information System (INIS)

Esfandyari, A. R.; Khorram, S.

2001-01-01

Ion-acoustic solitons in a collisionless plasma consisting of warm ions, hot isothermal electrons and a electron beam are studied by using the reductive perturbation method. The basic set of fluid equations is reduced to Korteweg-de Vries and modified Korteweg-de Vries temperature and electron beam on ion acoustic equations. The effect of ion solitons are investigated

Ion-acoustic solitons in a plasma with electron beam; Amvaj-e solitoni-ye yon-e soti-e dar hozur-e barik-e-ye kelasiki dar plasma

Energy Technology Data Exchange (ETDEWEB)

Esfandyari, A R; Khorram, S

2001-07-01

Ion-acoustic solitons in a collisionless plasma consisting of warm ions, hot isothermal electrons and a electron beam are studied by using the reductive perturbation method. The basic set of fluid equations is reduced to Korteweg-de Vries and modified Korteweg-de Vries temperature and electron beam on ion acoustic equations. The effect of ion solitons are investigated.

Internal and forced eddy variability in the Labrador Sea

Science.gov (United States)

Bracco, A.; Luo, H.; Zhong, Y.; Lilly, J.

2009-04-01

Water mass transformation in the Labrador Sea, widely believed to be one of the key regions in the Atlantic Meridional Overturning Circulation (AMOC), now appears to be strongly impacted by vortex dynamics of the unstable boundary current. Large interannual variations in both eddy shedding and buoyancy transport from the boundary current have been observed but not explained, and are apparently sensitive to the state of the inflowing current. Heat and salinity fluxes associated with the eddies drive ventilation changes not accounted for by changes in local surface forcing, particularly during occasional years of extreme eddy activity, and constitute a predominant source of "internal" oceanic variability. The nature of this variable eddy-driven restratification is one of the outstanding questions along the northern transformation pathway. Here we investigate the eddy generation mechanism and the associated buoyancy fluxes by combining realistic and idealized numerical modeling, data analysis, and theory. Theory, supported by idealized experiments, provides criteria to test hypotheses as to the vortex formation process (by baroclinic instability linked to the bottom topography). Ensembles of numerical experiments with a high-resolution regional model (ROMS) allow for quantifying the sensitivity of eddy generation and property transport to variations in local and external forcing parameters. For the first time, we reproduce with a numerical simulation the observed interannual variability in the eddy kinetic energy in the convective region of the Labrador Basin and along the West Greenland Current.

Coeficientes de digestibilidade aparente de ingredientes para juvenis de jundiá Apparent digestibility coefficients of feed ingredients for jundia juveniles

Directory of Open Access Journals (Sweden)

Paulo Roberto Campagnoli de Oliveira Filho

2006-08-01

Full Text Available Foram determinados os coeficientes de digestibilidade aparente da MS, proteína e energia de cinco ingredientes (farelo de soja, glúten de milho, farinha de resíduo de peixe, quirera de arroz e milho para juvenis de jundiá, Rhamdia quelen (78,5 ± 9 g. A digestibilidade foi estimada pelo método indireto, utilizando-se óxido de crômio na concentração de 0,5% da dieta como indicador, efetuando-se a coleta de fezes a cada 4 horas por sedimentação. Entre os ingredientes testados, os maiores coeficientes de digestibilidade foram obtidos para o glúten de milho (95,0% para proteína, 88,0% para energia e 82,2% para MS e os menores para o milho (73,0% para proteína, 59,1% para energia e 57,2% para MS. Os demais ingredientes apresentaram valores intermediários de digestibilidade. Obtiveram-se, para o ingrediente energético quirera de arroz, valores de 80,7% para proteína, 64,8% para energia e 60,5% para a MS, enquanto, para os ingredientes protéicos farelo de soja e farinha de resíduo de peixe, os coeficientes de digestibilidade foram, respectivamente, de 88,6 e 77,7% para a proteína, 76,5 e 74,8% para a energia e 73,3 e 58,6% para a MS. Os resultados deste estudo demonstram que juvenis de jundiá, apesar do hábito alimentar onívoro, têm grande capacidade de digerir ingredientes protéicos e relativa dificuldade de digerir ingredientes energéticos, sugerindo que este peixe é onívoro com tendência à carnivoria.The apparent digestibility coefficients of DM, protein and energy of five ingredients (soybean meal, corn gluten meal, fish meal, broken rice and ground corn were determined for jundia juveniles (78.5 ± 9 g. The indirect method was adopted for nutrient digestibility estimate. Chromium oxide (0.5% was added to the diet as marker, and feces were collected by sedimentation every four hours. Among all tested ingredients, corn gluten meal showed the highest apparent digestibility coefficients (95.0% of protein, 88.0% of energy

Modified Regression Correlation Coefficient for Poisson Regression Model

Science.gov (United States)

Kaengthong, Nattacha; Domthong, Uthumporn

2017-09-01

This study gives attention to indicators in predictive power of the Generalized Linear Model (GLM) which are widely used; however, often having some restrictions. We are interested in regression correlation coefficient for a Poisson regression model. This is a measure of predictive power, and defined by the relationship between the dependent variable (Y) and the expected value of the dependent variable given the independent variables [E(Y|X)] for the Poisson regression model. The dependent variable is distributed as Poisson. The purpose of this research was modifying regression correlation coefficient for Poisson regression model. We also compare the proposed modified regression correlation coefficient with the traditional regression correlation coefficient in the case of two or more independent variables, and having multicollinearity in independent variables. The result shows that the proposed regression correlation coefficient is better than the traditional regression correlation coefficient based on Bias and the Root Mean Square Error (RMSE).

Mass attenuation and mass energy absorption coefficients for 10 keV to 10 MeV photons; Coefficients d'attenuation massique et d'absorption massique en energie pour les photons de 10 keV a 10 MeV

Energy Technology Data Exchange (ETDEWEB)

Joffre, H; Pages, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

In this report are given the elements allowing the definition of the values of mass attenuation coefficients and mass energy absorption coefficients for some elements and mixtures, necessary for the study of tissue equivalent materials, for photons in the energy range 10 keV to 10 MeV. After a short reminding of the definitions of the two coefficients, follows, in table form, a compilation of these coefficients, as a function of energy, for simple elements, for certain mineral compounds, organic compounds, gases and particularly of soft tissues. (author) [French] Dans ce rapport, sont donnes les elements permettant de determiner les valeurs des coefficients d'attenuation massique et d'absorption massique en energie pour certains elements et melanges necessaires a l'etude des materiaux equivalents aux tissus pour les photons dans le domaine d'energie allant de 10 keV a 10 MeV. Apres un bref rappel des definitions des deux coefficients, suit, sous forme de tableaux, un recueil de ces coefficients, en fonction de l'energie, pour les elements simples, certains composes mineraux, composes organiques, gaz, et, particulierement, pour les tissus mous. (auteur)

Methodes de calcul des forces aerodynamiques pour les etudes des interactions aeroservoelastiques

Science.gov (United States)

Biskri, Djallel Eddine

L'aeroservoelasticite est un domaine ou interagissent la structure flexible d'un avion, l'aerodynamique et la commande de vol. De son cote, la commande du vol considere l'avion comme une structure rigide et etudie l'influence du systeme de commande sur la dynamique de vol. Dans cette these, nous avons code trois nouvelles methodes d'approximation de forces aerodynamiques: Moindres carres corriges, Etat minimal corrige et Etats combines. Dans les deux premieres methodes, les erreurs d'approximation entre les forces aerodynamiques approximees par les methodes classiques et celles obtenues par les nouvelles methodes ont les memes formes analytiques que celles des forces aerodynamiques calculees par LS ou MS. Quant a la troisieme methode, celle-ci combine les formulations des forces approximees avec les methodes standards LS et MS. Les vitesses et frequences de battement et les temps d'executions calcules par les nouvelles methodes versus ceux calcules par les methodes classiques ont ete analyses.

Bifurcation analysis for ion acoustic waves in a strongly coupled plasma including trapped electrons

Science.gov (United States)

El-Labany, S. K.; El-Taibany, W. F.; Atteya, A.

2018-02-01

The nonlinear ion acoustic wave propagation in a strongly coupled plasma composed of ions and trapped electrons has been investigated. The reductive perturbation method is employed to derive a modified Korteweg-de Vries-Burgers (mKdV-Burgers) equation. To solve this equation in case of dissipative system, the tangent hyperbolic method is used, and a shock wave solution is obtained. Numerical investigations show that, the ion acoustic waves are significantly modified by the effect of polarization force, the trapped electrons and the viscosity coefficients. Applying the bifurcation theory to the dynamical system of the derived mKdV-Burgers equation, the phase portraits of the traveling wave solutions of both of dissipative and non-dissipative systems are analyzed. The present results could be helpful for a better understanding of the waves nonlinear propagation in a strongly coupled plasma, which can be produced by photoionizing laser-cooled and trapped electrons [1], and also in neutron stars or white dwarfs interior.

Precise calculation of the transmission coefficient of a potential barrier. Study of the error in the B K W approximation; Calcul exact du coefficient de transmission d'une barriere de potentiel. Etude de l'erreur de l'approximation B K W

Energy Technology Data Exchange (ETDEWEB)

Jamet, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

Following on to work started in a previous report, the author carries out in the case of few examples, the calculation of the transmission coefficient T using accurate methods. He then deduces from this the error in the B K W method. The calculations are carried out for values of T ranging down to 10{sup -200}. The use of modern computers makes it possible to obtain values of T to eight decimal places in a few seconds and the practical advantage of the B K W approximation appears therefore considerably reduced. The author gives also a method which may be used for an exact calculation of the energy levels of a potential well. (author) [French] Poursuivant une etude commencee dans une note anterieure, l'auteur effectue, sur quelques exemples, le calcul du coefficient de transmission T par des methodes exactes. Il en deduit ensuite l'erreur de la methode B K W. Les calculs sont faits pour des valeurs de T allant jusqu'a 10{sup -200}. L'utilisation des machines a calculer modernes permettant d'obtenir en quelques secondes, la valeur de T avec 8 decimales exactes, l'interet pratique de l'approximation B K W semble considerablement diminue. L'auteur indique egalement une methode qui peut servir a calculer exactement les niveaux d'energie d'un puits de potentiel. (auteur)

Variabilidade espacial e temporal da vegetação em pastos de capim braquiária diferidos Spatial and temporal variability of vegetation on deferred signalgrass pastures

Directory of Open Access Journals (Sweden)

Manoel Eduardo Rozalino Santos

2010-04-01

Full Text Available Avaliou-se a variabilidade espacial e temporal de características descritoras da condição de pastos diferidos de Brachiaria decumbens cv. Basilisk (capim-braquiária. Os tratamentos consistiram de combinações dos períodos de diferimento da pastagem (73, 103, 131 e 163 dias com os períodos de pastejo (29, 57 e 85 dias. Utilizou-se esquema de parcelas subdivididas e delineamento em blocos casualizados com duas repetições. Foi determinada a dispersão dos valores de altura do pasto, altura da planta estendida e do índice de tombamento do pasto. A variabilidade espacial da altura do pasto aumentou de forma linear com o período de diferimento, porém não foi influenciada pelo período de pastejo. O coeficiente de variação da altura da planta estendida diminuiu linearmente em pastos submetidos aos maiores períodos de diferimento e não foi afetado pelo período de pastejo. A variabilidade do índice de tombamento, no entanto, apresentou resposta quadrática ao período de diferimento, com ponto de máximo correspondente ao coeficiente de variação de 38,25% aos 130 dias. Em pastagens diferidas por curto período (73 dias, ocorreu variação negativa do coeficiente de variação durante o período de pastejo. Pastos de capimbraquiária sob diferimento por longos períodos possuem maior variabilidade da altura do pasto e menor heterogeneidade da altura da planta estendida. Além do efeito temporal, ocorre grande variabilidade espacial nas pastagens de capim-braquiária diferidas.It was evaluated spatial and temporal variability of status descriptive characters of Brachiaria decumbens (signalgrass cv. Basilisk deferred pastures. Treatments consisted of combinations of pasture deferring periods (73, 103, 131 and 163 days with grazing periods (29, 57 and 85 days. Randomized block design with two repetitions and subdivided plots was used. It was determined the dispersion of pasture height (PH, stretched plant height (SPH and falling index

Variables e Índices de Competitividad de las Empresas Exportadoras, utilizando el PLS

Directory of Open Access Journals (Sweden)

Joel Bonales Valencia

2015-12-01

Full Text Available El ambiente competitivo entre las empresas exportadoras ha generado la necesidad de crear estrategias competitivas para seguir teniendo presencia en los mercados internacionales. De esto se desglosa, que las compañías requieren mejor entendimiento sobre la competitividad, los factores que la determinan, y los índices que la miden. Sin embargo, los factores e índices de competitividad por sí solos no proveen suficiente información útil para los directivos, por lo que es necesario validar un modelo que interrelacione los factores e índicesde la competitividad de las empresas exportadoras. En este artículo se muestra una revisión de las variables importantes para comprender la competitividad y se extraen del marco teórico los factores que determinan la misma para el caso de las empresas exportadoras y los índices que la miden. A partir de las variables (calidad, precio, capacitación, tecnologíay canales de distribución se desarrolló una clasificación estructurada de factores e índices y se aplicó una encuesta a los directivos de veinticinco empresas exportadoras del estado de Michoacán. A partir de los factores e índices relevantes encontrados, se propone un modelo que describe cómo esas variables están interrelacionadas, basándose en la técnica estadística de modelación de Mínimos Cuadrados Parciales (Partial Least Squares, en inglés conocido también como PLS. Los resultados finales mostraron que la variable tecnología tiene el mayor impacto sobre los índices de competitividad, lo que implica que las empresas exportadoras deben poner especial atención en esta variable.

Principle of the determination of neutron multiplication coefficients by the Monte Carlo method. Application. Description of a code for ibm 360-75; Principe de la determination des coefficients de multiplication neutronique par methode de Monte-Carlo. Application. Description d'un code pour IBM 360-75

Energy Technology Data Exchange (ETDEWEB)

Moreau, J; Parisot, B [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

The determination of neutron multiplication coefficients by the Monte Carlo method can be carried out in different ways; the are first examined particularly complex geometries; it makes use of multi-group isotropic cross sections. The performances of this code are illustrated by some examples. (author) [French] La determination des coefficients de multiplication neutronique par methode de Monte Carlo peut se faire par differentes voies, elles sont successivement examinees et comparees. On en deduit un code rapide pour des geometries particulierement complexes, il utilise des sections efficaces multigroupes isotropes. Les performances de ce code sont demontrees par quelques exemples. (auteur)

External forcing as a metronome for Atlantic multidecadal variability

Science.gov (United States)

Otterå, Odd Helge; Bentsen, Mats; Drange, Helge; Suo, Lingling

2010-10-01

Instrumental records, proxy data and climate modelling show that multidecadal variability is a dominant feature of North Atlantic sea-surface temperature variations, with potential impacts on regional climate. To understand the observed variability and to gauge any potential for climate predictions it is essential to identify the physical mechanisms that lead to this variability, and to explore the spatial and temporal characteristics of multidecadal variability modes. Here we use a coupled ocean-atmosphere general circulation model to show that the phasing of the multidecadal fluctuations in the North Atlantic during the past 600 years is, to a large degree, governed by changes in the external solar and volcanic forcings. We find that volcanoes play a particularly important part in the phasing of the multidecadal variability through their direct influence on tropical sea-surface temperatures, on the leading mode of northern-hemisphere atmosphere circulation and on the Atlantic thermohaline circulation. We suggest that the implications of our findings for decadal climate prediction are twofold: because volcanic eruptions cannot be predicted a decade in advance, longer-term climate predictability may prove challenging, whereas the systematic post-eruption changes in ocean and atmosphere may hold promise for shorter-term climate prediction.

Desempeño en aula de instructores, el punto de vista de los participantes

Directory of Open Access Journals (Sweden)

Oscar Alejandro Martínez Jaime

2012-05-01

Full Text Available The differences between the variables and items were evaluated in the Civic Education andDemocratic Education Course through a survey, as well as the reliability of it using theKruskal-Wallis test, correlation coefficient and the Cronbach alpha coefficient. Significant differenceson the performance in classroom between instructors and variables were found. The“learning development” variable was different, as “planning and unit evaluation” along with“didactic implementation” were statistically the same. The items with greater problems were“creativity and innovation”, “team-work”, “problem solving”, “essay writing” and “respect forthe ideas of others”. The survey exhibited high reliability levels. Therefore, it is required toupdate the instructors and to reduce the number of items.Se evaluaron las diferencias entre las variables e ítems en el aula de instructores del Di­plomado en Educación Cívica y Educación Democrática mediante una encuesta, así como la confiabilidad de la misma empleando la prueba de Kruskal-Wallis, el coeficiente de Co­rrelación, la prueba de la Diferencia Mínima Significativa y el Coeficiente alfa de Cronbach. Se presentaron diferencias significativas en el desempeño en el aula entre instructores y entre variables. La variable “desarrollo de los aprendizajes” fue diferente, mientras que “planeación” y “evaluación de la unidad” junto con “implementación didáctica” fueron iguales estadísti­camente. Los ítems con mayores problemas fueron “creatividad e innovación”, “trabajo en equipo”, “resolución de problemas”, “elaboración de ensayos” y “respeto a las ideas ajenas”. La encuesta presentó altos niveles de confiabilidad, por lo que se requiere actualizar los instructores y reducir el número de ítems.

Bilinear forms and soliton solutions for a fourth-order variable-coefficient nonlinear Schrödinger equation in an inhomogeneous Heisenberg ferromagnetic spin chain or an alpha helical protein

Energy Technology Data Exchange (ETDEWEB)

Yang, Jin-Wei; Gao, Yi-Tian, E-mail: gaoyt163@163.com; Wang, Qi-Min; Su, Chuan-Qi; Feng, Yu-Jie; Yu, Xin

2016-01-15

In this paper, a fourth-order variable-coefficient nonlinear Schrödinger equation is studied, which might describe a one-dimensional continuum anisotropic Heisenberg ferromagnetic spin chain with the octuple–dipole interaction or an alpha helical protein with higher-order excitations and interactions under continuum approximation. With the aid of auxiliary function, we derive the bilinear forms and corresponding constraints on the variable coefficients. Via the symbolic computation, we obtain the Lax pair, infinitely many conservation laws, one-, two- and three-soliton solutions. We discuss the influence of the variable coefficients on the solitons. With different choices of the variable coefficients, we obtain the parabolic, cubic, and periodic solitons, respectively. We analyse the head-on and overtaking interactions between/among the two and three solitons. Interactions between a bound state and a single soliton are displayed with different choices of variable coefficients. We also derive the quasi-periodic formulae for the three cases of the bound states.

The long and short run forcing variables of purchasing power parity of ASEAN-5

OpenAIRE

Abdalrahman AbuDalu; Elsadig Musa Ahmed

2013-01-01

This study examines the long-run and short-run forcing variables of purchasing power parity (PPP) for ASEAN-5 currencies vis-a-vis the U.S. dollar, i.e., their real effective exchange rate (REER). This study uses the autoregressive distributed lag (ARDL) approach to co-integration over the period 1991:Q1 – 2006:Q2. Our empirical results suggest that the domestic money supply (M1) is a significant long run forcing variable for the REERs of Malaysia, Indonesia, the Philippines, and Singapore. H...

Local energy decay for linear wave equations with variable coefficients

Science.gov (United States)

Ikehata, Ryo

2005-06-01

A uniform local energy decay result is derived to the linear wave equation with spatial variable coefficients. We deal with this equation in an exterior domain with a star-shaped complement. Our advantage is that we do not assume any compactness of the support on the initial data, and its proof is quite simple. This generalizes a previous famous result due to Morawetz [The decay of solutions of the exterior initial-boundary value problem for the wave equation, Comm. Pure Appl. Math. 14 (1961) 561-568]. In order to prove local energy decay, we mainly apply two types of ideas due to Ikehata-Matsuyama [L2-behaviour of solutions to the linear heat and wave equations in exterior domains, Sci. Math. Japon. 55 (2002) 33-42] and Todorova-Yordanov [Critical exponent for a nonlinear wave equation with damping, J. Differential Equations 174 (2001) 464-489].

A new generalized expansion method and its application in finding explicit exact solutions for a generalized variable coefficients KdV equation

International Nuclear Information System (INIS)

Sabry, R.; Zahran, M.A.; Fan Engui

2004-01-01

A generalized expansion method is proposed to uniformly construct a series of exact solutions for general variable coefficients non-linear evolution equations. The new approach admits the following types of solutions (a) polynomial solutions, (b) exponential solutions, (c) rational solutions, (d) triangular periodic wave solutions, (e) hyperbolic and solitary wave solutions and (f) Jacobi and Weierstrass doubly periodic wave solutions. The efficiency of the method has been demonstrated by applying it to a generalized variable coefficients KdV equation. Then, new and rich variety of exact explicit solutions have been found

Muscle Force-Velocity Relationships Observed in Four Different Functional Tests.

Science.gov (United States)

Zivkovic, Milena Z; Djuric, Sasa; Cuk, Ivan; Suzovic, Dejan; Jaric, Slobodan

2017-02-01

The aims of the present study were to investigate the shape and strength of the force-velocity relationships observed in different functional movement tests and explore the parameters depicting force, velocity and power producing capacities of the tested muscles. Twelve subjects were tested on maximum performance in vertical jumps, cycling, bench press throws, and bench pulls performed against different loads. Thereafter, both the averaged and maximum force and velocity variables recorded from individual trials were used for force-velocity relationship modeling. The observed individual force-velocity relationships were exceptionally strong (median correlation coefficients ranged from r = 0.930 to r = 0.995) and approximately linear independently of the test and variable type. Most of the relationship parameters observed from the averaged and maximum force and velocity variable types were strongly related in all tests (r = 0.789-0.991), except for those in vertical jumps (r = 0.485-0.930). However, the generalizability of the force-velocity relationship parameters depicting maximum force, velocity and power of the tested muscles across different tests was inconsistent and on average moderate. We concluded that the linear force-velocity relationship model based on either maximum or averaged force-velocity data could provide the outcomes depicting force, velocity and power generating capacity of the tested muscles, although such outcomes can only be partially generalized across different muscles.

Modified quasi-boundary value method for Cauchy problems of elliptic equations with variable coefficients

Directory of Open Access Journals (Sweden)

Hongwu Zhang

2011-08-01

Full Text Available In this article, we study a Cauchy problem for an elliptic equation with variable coefficients. It is well-known that such a problem is severely ill-posed; i.e., the solution does not depend continuously on the Cauchy data. We propose a modified quasi-boundary value regularization method to solve it. Convergence estimates are established under two a priori assumptions on the exact solution. A numerical example is given to illustrate our proposed method.

Determinación de las variables significativas en la obtención de 2 derivados de quitina

Directory of Open Access Journals (Sweden)

Sol Amalia Fernández Monagas

2002-08-01

Full Text Available Al aplicar un diseño factorial fraccionario 27-4 se determinó que las variables más significativas para la introducción de grupos carboxilo en la molécula de quitina son: el tiempo de reacción con ácido monocloroacético, la concentración de ácido monocloroacético, la temperatura de pretratamiento de la quitina con el hidróxido de sodio y la concentración de hidróxido de sodio. Las variables más significativas en la formación de grupo amino resultaron ser la concentración de ácido monocloroacético, la temperatura de reacción con ácido monocloroacético, la temperatura de pretratamiento de la quitina y la concentración de hidróxido de sodio.After applying a fraction factor design 27-4, it was determined that the most significant variables for the introduction of carboxyl groups in the chitin molecule were time of reaction with monochloroacetic acid, the concentration of this acid, the pre-treatment temperature of chitin with sodium hydroxide, and the concentration of sodium hydroxide. The most significant variables in the formation of the amino group were the concentration of monochloroacetic acid, the reaction temperature with monochloroacetic acid, the pre-treatment temperature of chitin and the concentration of sodium hydroxide.

Off-diagonal coefficients of the DeWitt-Schwinger and Hadamard representations of the Feynman propagator

International Nuclear Information System (INIS)

Decanini, Yves; Folacci, Antoine

2006-01-01

Having in mind applications to gravitational wave theory (in connection with the radiation reaction problem), stochastic semiclassical gravity (in connection with the regularization of the noise kernel) and quantum field theory in higher-dimensional curved spacetime (in connection with the Hadamard regularization of the stress-energy tensor), we improve the DeWitt-Schwinger and Hadamard representations of the Feynman propagator of a massive scalar field theory defined on an arbitrary gravitational background by deriving higher-order terms for the covariant Taylor series expansions of the geometrical coefficients--i.e., the DeWitt and Hadamard coefficients--that define them

Avaliação de cultivares de alfafa e estimativas de repetibilidade de caracteres forrageiros Evaluation of alfalfa cultivars and estimates of repeatability coefficient of forage traits

Directory of Open Access Journals (Sweden)

Reinaldo de Paula Ferreira

1999-06-01

Full Text Available O objetivo deste trabalho foi avaliar o desempenho de 42 cultivares de alfafa (Medicago sativa L. e estimar o coeficiente de repetibilidade das características produção de matéria seca, teor de proteína bruta na folha e no caule e tolerância a doenças, avaliadas no período das águas (outubro a março e da seca (abril a setembro, em seis cortes. Observou-se variabilidade significativa entre as cultivares quanto à produção de matéria seca e ao teor de proteína bruta na folha, em ambas as estações. No tocante a teor de proteína bruta no caule e tolerância a doenças, a variabilidade foi manifestada apenas no período da seca. As cultivares de melhor desempenho, para a maioria das características avaliadas, foram Crioula e Cibola. Em geral, o coeficiente de repetibilidade apresentou estimativas de baixa magnitude (inferior a 0,4. Quanto à produção de matéria seca, constatou-se a existência de comportamento similar das cultivares avaliadas nos dois períodos estudados, coeficiente de repetibilidade variando de 0,3195 a 0,4270, determinação genotípica em torno de 65%, e possibilidade de se atingir a predição do valor real por meio de sete a nove cortes.The objective of this study was to evaluate the performance of 42 cultivars of alfalfa (Medicago sativa L. and to estimate the repeatability coefficient for dry matter production, leaf and stem protein content and disease tolerance features during the dry (April to September and rainy (October to March seasons with six cuts. Dry matter yield and leaf protein content presented significant variation in both seasons, although stem protein content and tolerance to diseases were different only during the dry season. Cultivars Crioula and Cibola had the best performance in most features. In general, the repeatability coefficient showed a low magnitude estimate (below 0,40. Regarding dry matter production, the cultivars showed similar behavior in both seasons, with repeatability

Load cell adoption in an electronic drag force flowmeter Medidor de vazão eletrônico com célula de carga

Directory of Open Access Journals (Sweden)

Antonio Pires de Camargo

2011-06-01

Full Text Available This research introduces the development of an electronic flowmeter based on the drag force that a body experiences when immersed in a fluid stream. Its main goal was the development of an Electronic Drag Force Flowmeter (EDFF using a load cell, as well as the evaluation of its performance parameters. The developed flowmeter should not require specialized labor, equipments, computers or any sophisticated and complex method, providing an easy and accurate way of flow estimation. This research was carried out in the following stages: (i EDFF mechanical structure development; (ii data acquisition system and embedded software design; and (iii evaluation of EDFF performance parameters. EDFF has routines for instantaneous flow rate measurement, interactive calibration, and also several flow meter parameter adjustments, allowing data transmission via a RS232 protocol. The real-time flow measurement task updates values of instantaneous flow rate each seven seconds, enabling unit selection. The interactive calibration routine guides users during all calibration process showing instructions on EDFF's display. A data digital filtering procedure was implemented in an embedded software using the Grubbs' Test in order to identify and to remove outliers from the acquired data. The Method of Least Squares was also implemented in the embedded software in order to calculate the fitting model coefficients on the calibration procedure. This flowmeter is able to work from 1.94 to 7.78 dm³ s-1 with an uncertainty of ± 5.7%. The coefficient of local head loss (K was close to 0.55 for Reynolds number values higher than 10(5. The developed EDFF is a low-cost and stand-alone system with potential for agricultural applications.Este estudo apresenta o desenvolvimento de um medidor de vazão baseado na força de arraste que atua em um corpo imerso em uma corrente líquida. O principal objetivo foi o desenvolvimento de um Medidor de Vazão Eletrônico tipo Força (MVEF

VARIABLES BIOFÍSICAS DE DOCE SISTEMAS AGROSILVOPASTORILES EN LA MESETA DE POPAYÁN - CAUCA

Directory of Open Access Journals (Sweden)

SANDRA MORALES-VELASCO

Full Text Available En doce sistemas agrosilvopastoriles en etapa de establecimiento, se midieron las variables biofísicas (Temperatura, humedad, Radiación, flora asociada y suelo, con el fin de determinar las variables condicionantes para la producción silvopastoril en la meseta de Popayán. Para tal fin se realizaron correlaciones de Pearson, análisis de componentes principales y dendrograma de agrupamiento. Se halló que las variables microclimáticas son acordes a la adaptación de los forrajes cultivados, se identificaron 48 especies de flora asociada importantes en la alimentación animal y la protección de los recursos naturales. Al realizar el análisis de componentes principales se encontró que las variables más influyentes fueron la materia orgánica seguida de la radiación solar y la infiltración. El análisis de agrupamiento encontró tres grupos, el grupo A. conformado por los sistemas caracterizados por tener una radiación solar alta y un contenido de materia orgánica medio. El grupo B. tienen una radiación solar media y un contenido de materia orgánica bajo y el grupo C. muestra una baja radiación y alto contenido de materia orgánica.

Variable delay generator, type GRV 1; Generateur de retards variables, type GRV 1

Energy Technology Data Exchange (ETDEWEB)

Caillet, C.; Chaigne, M.; Janot, P. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

This apparatus has been designed mainly for simulating the passage of a fluid circulating inside a pipe. It is assumed that no heat exchange occurs during the passage so that the temperature of the fluid is the same at the entry and at the exit. A consequence of this is that the apparatus memorizes the value of the temperature on entry and reproduces it again at the end of the passage. The memorizing is effected by means of condensers which are charged at a given moment and whose voltage across the terminals is read after a time which is proportional to the variable flow of the fluid. The object is therefore to delay a given value, whence the name of variable delay generator. In its present form the apparatus can produce delays of from 1,4 seconds to 3000 seconds and more. (authors) [French] Cet appareil a ete concu principalement pour simuler la duree de trajet d'un fluide circulant a l'interieur d'une tuyauterie. On admet qu'il n'y a aucun echange de chaleur durant le trajet de sorte que la temperature du fluide a la sortie est egale a celle qu'il avait a l'entree. Il en resulte que l'appareil met en memoire la valeur de la temperature a l'entree et la restitue a la fin de la duree du trajet. La memoire est realisee par des condensateurs qui sont charges a un instant donne et dont la tension aux bornes est lue apres un temps proportionnel au debit variable du fluide. Tout revient donc a retarder une grandeur, d'ou le nom de generateur de retards variables. Dans sa forme actuelle l'appareil permet d'obtenir des retards allant de 1,4 secondes a 3000 secondes et davantage. (auteurs)

Variable delay generator, type GRV 1; Generateur de retards variables, type GRV 1

Energy Technology Data Exchange (ETDEWEB)

Caillet, C; Chaigne, M; Janot, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

This apparatus has been designed mainly for simulating the passage of a fluid circulating inside a pipe. It is assumed that no heat exchange occurs during the passage so that the temperature of the fluid is the same at the entry and at the exit. A consequence of this is that the apparatus memorizes the value of the temperature on entry and reproduces it again at the end of the passage. The memorizing is effected by means of condensers which are charged at a given moment and whose voltage across the terminals is read after a time which is proportional to the variable flow of the fluid. The object is therefore to delay a given value, whence the name of variable delay generator. In its present form the apparatus can produce delays of from 1,4 seconds to 3000 seconds and more. (authors) [French] Cet appareil a ete concu principalement pour simuler la duree de trajet d'un fluide circulant a l'interieur d'une tuyauterie. On admet qu'il n'y a aucun echange de chaleur durant le trajet de sorte que la temperature du fluide a la sortie est egale a celle qu'il avait a l'entree. Il en resulte que l'appareil met en memoire la valeur de la temperature a l'entree et la restitue a la fin de la duree du trajet. La memoire est realisee par des condensateurs qui sont charges a un instant donne et dont la tension aux bornes est lue apres un temps proportionnel au debit variable du fluide. Tout revient donc a retarder une grandeur, d'ou le nom de generateur de retards variables. Dans sa forme actuelle l'appareil permet d'obtenir des retards allant de 1,4 secondes a 3000 secondes et davantage. (auteurs)

Estimation of exhaust gas aerodynamic force on the variable geometry turbocharger actuator: 1D flow model approach

International Nuclear Information System (INIS)

Ahmed, Fayez Shakil; Laghrouche, Salah; Mehmood, Adeel; El Bagdouri, Mohammed

2014-01-01

Highlights: • Estimation of aerodynamic force on variable turbine geometry vanes and actuator. • Method based on exhaust gas flow modeling. • Simulation tool for integration of aerodynamic force in automotive simulation software. - Abstract: This paper provides a reliable tool for simulating the effects of exhaust gas flow through the variable turbine geometry section of a variable geometry turbocharger (VGT), on flow control mechanism. The main objective is to estimate the resistive aerodynamic force exerted by the flow upon the variable geometry vanes and the controlling actuator, in order to improve the control of vane angles. To achieve this, a 1D model of the exhaust flow is developed using Navier–Stokes equations. As the flow characteristics depend upon the volute geometry, impeller blade force and the existing viscous friction, the related source terms (losses) are also included in the model. In order to guarantee stability, an implicit numerical solver has been developed for the resolution of the Navier–Stokes problem. The resulting simulation tool has been validated through comparison with experimentally obtained values of turbine inlet pressure and the aerodynamic force as measured at the actuator shaft. The simulator shows good compliance with experimental results

Epoxidación de aceite de soja refinado mediante oxígeno molecular. Influencia de las variables. Estudio cinético

Directory of Open Access Journals (Sweden)

Martínez de la Cuesta, P. J.

1991-02-01

Full Text Available The influences of temperature, concentration of catalyst and initial concentration of unsaturation on epoxide formation and esters from oleic and linoleic acids disappearance in liquid phase epoxidation reaction by molecular oxygen of soy-bean oil using molibdenyl-acetylacetonate as catalyst, has been studied. From experimental data obtained by a complex factorial design, an equation for epoxide formation reaction rate as a function of temperature, catalyst concentration and unsaturation initial concentration were deduced. A kinetic model is proposed too and using a calculation program based on 4^th Order Runge-Kutta numerical procedure to simulate the reactions that took place, the kinetic coefficients and activation energies that best fitted the calculated data to the experimental data were determined.

Se ha estudiado la influencia de la temperatura, concentración de catalizador y concentración inicial de insaturación sobre la formación de epóxido y desaparición de los esteres de los ácidos oleico y linoleico, en la reacción de epoxidación en fase líquida de aceite de soja con oxígeno molecular usando acetilacetonato de molibdenilo (AAMo como catalizador. A partir de los datos, obtenidos según un diseño factorial complejo, se ha deducido una ecuación para la velocidad de formación de epóxido en función de las tres variables estudiadas. Se propone también un modelo cinético a partir del cual, y siguiendo el método numérico de Runge-Kutta que simula la reacción que tiene lugar, se determinan los valores de las constantes cinéticas y respectivas energías de activación.

Compendio de los Sistemas de Distribución Variable (SDV)

OpenAIRE

Cabrera Rodríguez, Luis Carlos; Sigüenza Reinoso, Adrián Xavier

2007-01-01

El "Compendio de los Sistemas de Distribución Variable (SDV)"; es un libro en donde se describe a los profesionales del sector automotriz acerca de las particularidades de esta innovación tecnológica que día a día sigue mejorando y que es necesario que todos nos pongamos al tanto; que los ingenieros crearon en los motores de combustión con el fin de incrementar su rendimiento así como también disminuir las emisiones contaminantes de estos. Cada uno de los capítulos de los cuales consta est...

Diffusion simulation of ferric ions in dosemeter Fricke-gel with variable diffusion coefficient

International Nuclear Information System (INIS)

Milani, Caio Jacob; Bevilacqua, Joyce da Silva; Rodrigues Junior, Orlando

2014-01-01

Dosimetry using dosimeters Fricke-xylenol-Gel (FXG) allows confirmation and better understanding of radiotherapy treatments. The technique involves the evaluation of volumes irradiated by magnetic resonance imaging (MRI) or CT-optical. In both cases, the time spent between the irradiation and measurement is an important factor that directly influences the results. The quality of the images can be compromised by the mobility of ferric ions (Fe 3+), formed during the interaction of radiation with matter, increasing the uncertainty in determining the isodose. In this work, we simulated the dynamic involving ferric ions formed in one irradiated region irradiated in a two-dimensional domain with a variable diffusion coefficient. This phenomenon is modeled by a differential equation and solved numerically by an efficient algorithm that generalizes the Crank-Nicolson method. The stability and consistency of the method guarantee the convergence of the numerical solution for a predefined tolerance based in the choice of discretization steps of time and space. Different continuous functions were chosen to represent the diffusion coefficient and graphical views of the phenomenon are presented for a better understanding of the process

Challenges in constraining anthropogenic aerosol effects on cloud radiative forcing using present-day spatiotemporal variability.

Science.gov (United States)

Ghan, Steven; Wang, Minghuai; Zhang, Shipeng; Ferrachat, Sylvaine; Gettelman, Andrew; Griesfeller, Jan; Kipling, Zak; Lohmann, Ulrike; Morrison, Hugh; Neubauer, David; Partridge, Daniel G; Stier, Philip; Takemura, Toshihiko; Wang, Hailong; Zhang, Kai

2016-05-24

A large number of processes are involved in the chain from emissions of aerosol precursor gases and primary particles to impacts on cloud radiative forcing. Those processes are manifest in a number of relationships that can be expressed as factors dlnX/dlnY driving aerosol effects on cloud radiative forcing. These factors include the relationships between cloud condensation nuclei (CCN) concentration and emissions, droplet number and CCN concentration, cloud fraction and droplet number, cloud optical depth and droplet number, and cloud radiative forcing and cloud optical depth. The relationship between cloud optical depth and droplet number can be further decomposed into the sum of two terms involving the relationship of droplet effective radius and cloud liquid water path with droplet number. These relationships can be constrained using observations of recent spatial and temporal variability of these quantities. However, we are most interested in the radiative forcing since the preindustrial era. Because few relevant measurements are available from that era, relationships from recent variability have been assumed to be applicable to the preindustrial to present-day change. Our analysis of Aerosol Comparisons between Observations and Models (AeroCom) model simulations suggests that estimates of relationships from recent variability are poor constraints on relationships from anthropogenic change for some terms, with even the sign of some relationships differing in many regions. Proxies connecting recent spatial/temporal variability to anthropogenic change, or sustained measurements in regions where emissions have changed, are needed to constrain estimates of anthropogenic aerosol impacts on cloud radiative forcing.

Lax-pair operators for squared eigenfunctions in the inverse scattering transformations

International Nuclear Information System (INIS)

Iino, Kazuhiro; Ichikawa, Yoshihiko.

1982-05-01

Modification of the algorithm of Chen, Lee and Liu enables us to construct alternative Lax-pair operators for the Korteweg-de Vries equation and the modified Korteweg-de Vries equation. These Lax-pair operators stand as the Lax-pair operators for the squared eigenfunction and the sum of squared eigenfunctions of the Ablowitz-Kaup-Newell-Segur inverse scattering transformation for these celebrated nonlinear evolution equations. (author)

Control desacoplado de un actuador de rigidez variable para robots asistenciales

Directory of Open Access Journals (Sweden)

J. Medina

2016-01-01

Full Text Available Resumen: Los actuadores de rigidez variable son dispositivos que permiten cambiar la posición y rigidez articular de un robot en forma simultánea. En los últimos años se han diseñado y desarrollado muchos dispositivos de este tipo, con la esperanza de favorecer la seguridad en la interacción humano-robot y mejorar el rendimiento dinámico de los robots. En este artículo se presenta el desarrollo de un controlador para un actuador de rigidez variable de configuración serie. La estrategia de control se basa en la linealización por realimentación y el ajuste de dos controladores lineales. Esta estrategia permite el seguimiento de referencias de posición y rigidez articular de forma simultánea y desacoplada. Además, se realizan simulaciones en las que se incorpora este dispositivo dentro del robot asistencial ASIBOT, a fin de evaluar el desempeño del controlador, los cambios en la dinámica del robot y las posibles ventajas que tendrá la inclusión del mismo a nivel de seguridad en la interacción física humano-robot. Abstract: The variable stiffness actuators are devices that change the position and stiffness of a robot simultaneously. In recent years have been designed and developed many devices of this type, hoping to ensure safety in human-robot interaction and improve the dynamic performance of robots. In this article, we present the control of a variable stiffness actuator with serial configuration. The control strategy is based on feedback linearization and adjustment of two linear controllers. This allows the control, independently, of the stiffness and the equilibrium position of the joint. Finally, the behavior of this device within the assistive robot ASIBOT, is simulated in order to assess: the controller performance, changes in the dynamics of the robot and possible advantages of a level of safety during physical interaction human-robot. Palabras clave: control de robot

Análisis de la capacidad de las variables conductuales para pronosticar el rendimiento

OpenAIRE

Álvaro Alcalde, Jordi; Gómez López, María Teresa; Barriopedro Moro, Maribel

2005-01-01

El objetivo de este estudio fue conocer la capacidad de las variables conductuales propias del fútbol para pronosticar el rendimiento de los equipos en competición. Se analizaron los 380 partidos de la Liga Española de Fútbol de la temporada 2003 – 2004. Se identificaron 31 variables correspondientes a 19 conductas de competición, estableciéndose un total de 80 categorías y se analizaron las relaciones con el rendimiento (goles), en la doble perspectiva según que los equipos actuasen como loc...

Divergence and genetic variability among superior rubber tree genotypes Divergência e variabilidade genética de genótipos superiores de seringueira

Directory of Open Access Journals (Sweden)

Lígia Regina Lima Gouvêa

2010-02-01

Full Text Available The objective of this work was to estimate the genetic variability and divergence among 22 superior rubber tree (Hevea sp. genotypes of the IAC 400 series. Univariate and multivariate analyses were performed using eight quantitative traits (descriptors, including yield. In the univariate analyses, the estimated parameters were: genetic and environmental variances; genetic and environmental coefficients of variation; and the variation index. The Mahalanobis generalized distance, the Tocher agglomerative method and canonical variables were used for the multivariate analyses. In the univariate analyses, variability was verified among the genotypes for all the variables evaluated. The Tocher method grouped the genotypes into 11 clusters of dissimilarity. The first four canonical variables explained 87.93% of the cumulative variation. The highest genetic variability was found in rubber yield-related traits, which contributed the most to the genetic divergence. The most divergent pairs of genotypes are suggested for crossbreeding. The genotypes evaluated are suitable for breeding and may be used to continue the IAC rubber tree breeding program.O objetivo deste trabalho foi estimar a divergência e a variabilidade genética entre 22 genótipos superiores de seringueira (Hevea sp. da série IAC 400. Análises univariadas e multivariadas foram realizadas com oito caracteres quantitativos (descritores, incluindo produtividade. Na análise univariada, os parâmetros estimados foram: variâncias genética e ambiental, coeficientes de variação genética e ambiental, e índice de variação. A distância generalizada de Mahalanobis, o método aglomerativo de Tocher e variáveis canônicas foram utilizados nas análises multivariadas. Nas análises univariadas, verificou-se variabilidade entre os genótipos para todas as variáveis avaliadas. O método de Tocher agrupou os genótipos em 11 grupos de dissimilaridade. As quatro primeiras variáveis can

IDENTIFICACIÓN DE VARIABLES EN EL PROCESO DE DECISIÓN DE COMPRA DE MATERIALES AUTOADHESIVOS

Directory of Open Access Journals (Sweden)

David Gómez Gómez

2001-01-01

Full Text Available El objetivo de la mayoría de las compañías se centra en obtener el liderazgo de su respectivo mercado, desarrollando diferentes estrategias, las cuales buscan ganar la preferencia del cliente en el momento de seleccionar una marca. Como variable crítica para lograrlo se encuentra la generación de una ventaja competitiva que lo diferencie de sus competidores. Sin embargo, la construcción de una ventaja competitiva es un proceso complejo que parte de la identificación de las necesidades del mercado. Es decir, sólo se obtendrá una ventaja competitiva si la empresa conoce realmente cuáles son los aspectos a los que el mercado les asigna valor, logrando satisfacerlos mejor que la competencia y de manera sostenible. El presente artículo se centra en la metodología para identificar esas variables críticas en la decisión de compra en los mercados industriales, las cuales permitirán a la organización ajustar su estrategia para lograr la preferencia de compra. Aunque se centra en la industria de materiales autoadhesivos, la aplicación de esta metodología y su marco de referencia se ajustan a cualquier mercado de tipo industrial, donde las decisiones son tomadas por grupos de compras multidisciplinarios y tienen una mayor complejidad técnica que las decisiones en los segmentos de productos de consumo masivo.

Módulo para la medición de variables en motores de combustión interna

Directory of Open Access Journals (Sweden)

Flavio Humberto Fernández-Morales

2013-01-01

Full Text Available Los motores de combustión interna son ampliamente utilizados como fuentes de alimentación en lugares de difícil acceso. Usualmente estos motores, de baja y media potencia, no cuentan con la instrumentación adecuada para que el usuario pueda establecer su correcto funcionamiento en variables como: temperatura, presión de aceite y velocidad de giro. En este trabajo se describe el diseño y puesta a punto de un módulo para la medición de las anteriores variables, que puede ser empleado en motores de combustión interna de funcionamiento estacionario. Se fabricó una tarjeta de adquisición de datos basada en el PIC 16F873, al cual se adaptaron los sensores de estado sólido requeridos para la medición de las variables. Este módulo permite la visualización de las variables a medir y puede ser programado para establecer rangos de operación según el motor con el que se quiera trabajar.

Novo método de classificação de coeficientes de variação para a cultura do arroz de terras altas A new method of variation coefficient classification for upland rice crop

Directory of Open Access Journals (Sweden)

Nilce Helena de Araújo Diniz Costa

2002-03-01

Full Text Available A avaliação de coeficientes de variação (CV como medida de precisão em experimentos tem sido realizada em diversas culturas, com alguns trabalhos propondo métodos para obtenção de faixas de classificação de CV, e outros trabalhos definindo as faixas de classificação, sempre com base na média e no desvio-padrão dos CVs, e pressupondo que os mesmos têm distribuição normal, o que nem sempre é verdadeiro. Este trabalho teve por objetivo propor um método para definir faixas de classificação de CV, independentemente da distribuição que possam apresentar; o método é baseado no uso da mediana (Md e do pseudo-sigma (PS. Utilizaramse, para este estudo, dados de 110 experimentos com arroz de terras altas, delineados em blocos completos casualizados, blocos incompletos generalizados, e reticulados quadrados, selecionandose os caracteres relacionados às doenças, ao acamamento, ao rendimento de grãos e a alguns componentes da produção. Foram construídas faixas de classificação de CV de cada caráter estudado, de forma geral e considerando o delineamento experimental empregado em experimentos com 30 a 100 tratamentos. O método proposto é eficiente para a definição de faixas dos CVs, independentemente de sua distribuição, e a variação nos valores do CV evidencia a importância de se considerar não só a variável em estudo, mas também o delineamento experimental utilizado. Experimentos que apresentaram menores CVs foram aqueles em que se empregaram os Delineamentos de Blocos Incompletos. As variáveis relacionadas às doenças e ao acamamento apresentam maiores coeficientes de variação.The assessment of coefficients of variation (CV as a measure of precision in experiments has been done for various crops, and some researchers have proposed a methodology to get classification bands of CV, and others defining the classification bands itself; based on the mean and on the standard deviation of the CV, assuming that they

Vertical random variability of the distribution coefficient in the soil and its effect on the migration of fallout radionuclides

International Nuclear Information System (INIS)

Bunzl, K.

2002-01-01

In the field, the distribution coefficient, K d , for the sorption of a radionuclide by the soil cannot be expected to be constant. Even in a well defined soil horizon, K d will vary stochastically in horizontal as well as in vertical direction around a mean value. The horizontal random variability of K d produce a pronounced tailing effect in the concentration depth profile of a fallout radionuclide, much less is known on the corresponding effect of the vertical random variability. To analyze this effect theoretically, the classical convection-dispersion model in combination with the random-walk particle method was applied. The concentration depth profile of a radionuclide was calculated one year after deposition assuming constant values of the pore water velocity, the diffusion/dispersion coefficient, and the distribution coefficient (K d = 100 cm 3 x g -1 ) and exhibiting a vertical variability for K d according to a log-normal distribution with a geometric mean of 100 cm 3 x g -1 and a coefficient of variation of CV 0.53. The results show that these two concentration depth profiles are only slightly different, the location of the peak is shifted somewhat upwards, and the dispersion of the concentration depth profile is slightly larger. A substantial tailing effect of the concentration depth profile is not perceivable. Especially with respect to the location of the peak, a very good approximation of the concentration depth profile is obtained if the arithmetic mean of the K d -values (K d = 113 cm 3 x g -1 ) and a slightly increased dispersion coefficient are used in the analytical solution of the classical convection-dispersion equation with constant K d . The evaluation of the observed concentration depth profile with the analytical solution of the classical convection-dispersion equation with constant parameters will, within the usual experimental limits, hardly reveal the presence of a log-normal random distribution of K d in the vertical direction in

Theorical and experimental study of the induced forces by the mixed, divergent, convergent and straight labyrinth of seal systems on the steam turbines, gas turbines and compressor rotors; Estudio teorico-experimental de las fuerzas inducidas por los sistemas de sellos de laberinto rectos, convergentes, divergentes y mixtos sobre los rotores de turbinas de vapor, turbinas de gas y compresores

Energy Technology Data Exchange (ETDEWEB)

Salazar San Andres, Octavio Ramon

1991-12-31

A theoretical and experimental research is conducted in order to determine the labyrinth seal forces, as well as the stiffness and damping coefficients for straight, convergent, divergent, and combined shapes on turbine and compressor rotors. The mathematical model is deduced on the basis of the single volume method and its solution is obtained by the perturbation procedure. The validation is achieved with published results. Experimental work carried out on a test bench is described in the text. This involved labyrinth seals with straight, convergent, and divergent profiles, as the published information relating to mixed type is sufficient to perform the evaluation. The conclusions demonstrate that the model is able to predict and determine the performance of labyrinth seals based on forces and rotordynamic coefficients for static and dynamic motions. Finally, tests on real steam turbines of 300 MW are recommended. In this case the high pressures and use of wheels with strips on the periphery and supported by the upper part of blades, increase the susceptibility of self excited subsynchronous vibrations. [Espanol] Se presenta una investigacion teorica-experimental relacionada con la obtencion y validacion de un modelo matematico capaz de predecir las fuerzas y los coeficientes de rigidez y amortiguamiento de los sellos de laberinto de tipo recto, convergente, divergente y mixto que se emplean en turbinas y compresores tanto terrestres como aereos. El modelo matematico propuesto se deduce a partir del metodo de un solo volumen y su solucion se obtiene a traves de metodos perturbatorios. La validacion del mismo se consigue al comparar con resultados experimentales publicados en revistas especializadas y con los datos medidos en un banco de pruebas cuya descripcion se incluye en el trabajo, cualculado para sellos rectos, convergentes y divergentes, ya que la informacion publicada respecto al tipo mixto o combinado es suficiente. Las conclusiones de la investigacion

Influencia de las Variables de Género em la Distribución de lãs Tareas Domésticas y de Cuidado

Directory of Open Access Journals (Sweden)

Consuelo Paterna

2009-01-01

Full Text Available Este estudio tiene como objeto identificar las variables implicadas en la participación parental. Los participantes fueron 130 parejas de doble ingreso y con niños menores de 12 años. Los resultados muestran que las diferentes formas de distribución de las tareas domésticas en la pareja se relacionan con los roles de género y la percepción de injusticia, mientras que la variable más eficaz en las tareas de cuidado es la conciencia de género. Por otra parte, se aprecia que las variables predictoras de la participación en las tareas domésticas son diferentes a las del cuidado de los hijos. Mientras para los hombres son las variable psicosociales (normas de estatus, conciencia de género y trabajo emocional los mejores predictores de su participación, en las mujeres son las variables sociolaborales (horario e ingresos las más significativas. Estos resultados sugieren que la participación de los hombres en la esfera familiar está mucho más influenciada por su ideología de género que en el caso de las mujeres.

Analysis and implementation issues for the numerical approximation of parabolic equations with random coefficients

KAUST Repository

Nobile, Fabio; Tempone, Raul

2009-01-01

We consider the problem of numerically approximating statistical moments of the solution of a time- dependent linear parabolic partial differential equation (PDE), whose coefficients and/or forcing terms are spatially correlated random fields. The stochastic coefficients of the PDE are approximated by truncated Karhunen-Loève expansions driven by a finite number of uncorrelated random variables. After approxi- mating the stochastic coefficients, the original stochastic PDE turns into a new deterministic parametric PDE of the same type, the dimension of the parameter set being equal to the number of random variables introduced. After proving that the solution of the parametric PDE problem is analytic with respect to the parameters, we consider global polynomial approximations based on tensor product, total degree or sparse polynomial spaces and constructed by either a Stochastic Galerkin or a Stochastic Collocation approach. We derive convergence rates for the different cases and present numerical results that show how these approaches are a valid alternative to the more traditional Monte Carlo Method for this class of problems. © 2009 John Wiley & Sons, Ltd.

Analysis and implementation issues for the numerical approximation of parabolic equations with random coefficients

KAUST Repository

Nobile, Fabio

2009-11-05

We consider the problem of numerically approximating statistical moments of the solution of a time- dependent linear parabolic partial differential equation (PDE), whose coefficients and/or forcing terms are spatially correlated random fields. The stochastic coefficients of the PDE are approximated by truncated Karhunen-Loève expansions driven by a finite number of uncorrelated random variables. After approxi- mating the stochastic coefficients, the original stochastic PDE turns into a new deterministic parametric PDE of the same type, the dimension of the parameter set being equal to the number of random variables introduced. After proving that the solution of the parametric PDE problem is analytic with respect to the parameters, we consider global polynomial approximations based on tensor product, total degree or sparse polynomial spaces and constructed by either a Stochastic Galerkin or a Stochastic Collocation approach. We derive convergence rates for the different cases and present numerical results that show how these approaches are a valid alternative to the more traditional Monte Carlo Method for this class of problems. © 2009 John Wiley & Sons, Ltd.

Avaliação do coeficiente de atrito de braquetes metálicos e estéticos com fios de aço inoxidável e beta-titânio Evaluation of the friction coefficient of metal and esthetic brackets with stainless steel and beta-titanium wires

Directory of Open Access Journals (Sweden)

Cristine Pritsch Braga

2004-12-01

Full Text Available Um fator importante que define a eficácia dos aparelhos ortodônticos fixos é o atrito existente entre as superfícies de fios e braquetes. Assim, este estudo teve como objetivo investigar o coeficiente de atrito estático entre fios de aço inoxidável e beta-titânio (TP Orthodontics e braquetes de aço inoxidável (Dynalock® - Unitek, braquetes estéticos com slot de aço inoxidável (Clarity® - Unitek e estéticos convencionais (Allure® - GAC. Para tanto, construiu-se um equipamento no Departamento de Engenharia Mecânica e Mecatrônica da PUCRS. Antes de serem iniciados os testes, foi quantificado o erro de método e constatou-se que não houve interferência significante (p>0,05 do fator operador nas medições. Então, pôde-se calcular o valor do coeficiente de atrito, obtido pela divisão da força de atrito pela carga normal. O método estatístico utilizado neste estudo foi Análise de Variância (ANOVA e teste de Comparações Múltiplas (Tukey. Constatou-se que: 1 a combinação com menor coeficiente de atrito foi composta pelo fio de aço inoxidável e braquete Dynalock® e a que apresentou maior coeficiente foi a do braquete Allure® com o fio de beta-titânio; 2 o fio de beta-titânio apresentou coeficiente de atrito significativamente maior do que o fio de aço inoxidável; 3 o braquete Dynalock® não apresentou diferenças significativas em relação ao coeficiente de atrito do braquete Clarity® quando o fio utilizado foi de beta-titânio. No entanto, quando o fio testado foi de aço inoxidável, apresentou coeficiente de atrito significativamente menor. O braquete Clarity® apresentou coeficiente de atrito significativamente menor do que o braquete Allure®.An important factor that defines the effectiveness of the appliances is the friction between the surfaces of wires and brackets. Thus, that study was developed in order to investigate the static friction coefficient between stainless steel and beta-titanium wires (TP

On nonlinear changes of the reflection coefficient of the fast wave at LH frequencies due to ponderomotive forces

International Nuclear Information System (INIS)

Petrzilka, V.

1991-09-01

The nonlinear changes of the reflection coefficient R of fast waves launched by waveguide arrays may be significant even for power densities S in the range of 3 or 4 kW/cm 2 . For the input parameters chosen in the computations, the effects of ponderomotive forces lead to an increase in plasma density in front of the grill , whereas for the slow wave the plasma density always decreases with growing S. For small plasma density in front of the grill, ponderomotive forces thus lead to the decrease of R, whereas for high plasma densities R grows with growing power density S. The heating of the edge plasma by the wave tends to weaken these changes. (Z.S.) 6 figs., 17 refs

EFECTOS SIMULTANEOS DE LAS VARIABLES DE PROCESO SOBRE LAS PROPIEDADES DE FLUJO DEL SUERO COSTEÑO

Directory of Open Access Journals (Sweden)

DIOFANOR ACEVEDO C.

Full Text Available El Suero costeño es un producto lácteo fermentado elaborado tradicionalmente en la Costa Caribe Colombiana. La sinéresis es un proceso de separación del Lactosuero de la cuajada simultáneamente con su encogimiento, es el mayor defecto de calidad de productos lácteos. El efecto simultáneo de temperatura de fermentación (TF, 27,7-39,4 ºC, nivel de sólidos totales (ST, 10,6-17,3%, w/v y concentración del inoculó (CI, 0,97-6,00 %v/v sobre el índice de flujo, umbral de fluencia y coeficiente de consistencia del Suero Costeño, fue estudiado por medio de la metodología de superficie de respuesta con tres variables y cinco niveles. El tratamiento estadístico dio lugar a la generación de modelos matemáticos, estos explican que el nivel de sólidos totales es la única variable que afecta significativamente el coeficiente de consistencia, índice de flujo y umbral de fluencia. El nivel de sólidos totales es la única variable que afectó significativamente las propiedades reológicas del Suero Costeño, y la adición de lactosuero parcialmente desmineralizado aumentó el esfuerzo de fluencia y el coeficiente de flujo, disminuyendo el índice de flujo. El aumento de sólidos totales por adición de proteínas del lactosuero es una manera adecuada para mejorar la consistencia, sabor y untabilidad del Suero Costeño.

Quality of phytopathometric variables generated from a ranking scale for the CABMV-passionfruit pathosystem = Qualidade de variáveis fitopatométricas geradas a partir de escala de notas para o patossistema CABMV – maracujazeiro ‘amarelo’

Directory of Open Access Journals (Sweden)

Antonio Carlos Mota Porto

2018-03-01

Full Text Available The Cowpea aphid-borne mosaic virus (CABMV is one of the most important pathogenic agents in passionfruit culture, causing extensive loss throughout the national territory. Efficient quantification of disease symptoms is highly dependent on the methodology used, and is directly related to the quality of data generated for later manipulation and analysis. Thus, our objective was to evaluate different methods of using the data collected using a scale based on quality of the generated variables, using statistical parameters. Assumptions of additivity, homoscedasticity and normality of the errors in parametric analysis were tested. Experimental quality, for each phytopatometric variable (PV was tested for calculated F (Fc, coefficient of determination (R² and coefficient of variation (CV%. Four different PVs were generated through a ranking scale: AUDPC-III, AUDPC-GS, III and GS. All variables met the assumptions for analysis of variance, with AUDPC-III and III PVs having slightly higher values in terms of adherence to normality, and AUDPC-GS and GS PVs having slightly higher values in terms of significance for additivity and homoscedasticity. AUDPC-III and III had the highest calculated R² and F values, and the highest coefficients of variation. We recorded the inverse for AUDPC-GS and GS, with lower coefficients of variation and higher R² and F values. A lower correlation, though still significant, was observed between AUDPC-GS and AUDPC-III, while a higher correlation was recorded between III and GS. Overall the PVs III and AUDPC-III systems were the best for use in the analyzes of the studied pathosystem. = O Cowpea aphid-borne mosaic virus (CABMV, responsável pelo endurecimento dos frutos do maracujazeiro, é um dos mais importantes agentes patogênicos na passicultura, pois causa grandes perdas em todo território nacional. A eficiência na quantificação dos sintomas foliares da doença é altamente dependente da metodologia empregada

A utilização de diferentes configurações de molas "T" para a obtenção de sistemas de forças otimizados Using different T-loops configurations to obtain optimized force systems

Directory of Open Access Journals (Sweden)

Guilherme Thiesen

2006-10-01

Full Text Available OBJETIVO: determinar as características mecânicas de molas "T" e "T" com helicóides, quando da incorporação de variações na liga metálica (aço inoxidável e beta-titânio, na intensidade de dobras de pré-ativação (0º e 40º/180º e na secção transversal do fio utilizado para a construção destas molas (0,017" x 0,025" e 0,019" x 0,025". METODOLOGIA: foram submetidas ao ensaio mecânico 80 molas para fechamento de espaços, sendo estas centralizadas em um espaço de 21mm. As magnitudes de força horizontal, proporção momento/força e relação carga/deflexão produzidas pelos corpos de prova foram quantificadas utilizando-se um transdutor de momentos acoplado ao módulo indicador digital para extensiometria e adaptado a uma máquina universal de ensaios Instron. As molas foram submetidas a uma ativação total de 5mm, sendo registrados os valores a cada 1mm de ativação. No tratamento estatístico dos dados obtidos, foi realizada a análise de variância, sendo esta complementada pelo teste de comparações múltiplas de Tukey, considerando o nível de significância de 5%. RESULTADOS E CONCLUSÕES: os resultados demonstraram que, de maneira geral, as molas "T" com helicóides produziram menores magnitudes de força horizontal e relação carga/deflexão do que as molas "T". Na presença de pré-ativação, as molas produziram altas proporções momento/força, enquanto, na ausência de dobras de pré-ativação, as mesmas geraram baixas proporções momento/força. Dentre todas as variáveis analisadas, aquela que apresentou uma maior influência na força horizontal e na relação carga/deflexão produzidas pelas molas foi a liga metálica. Já a proporção momento/força mostrou ser influenciada em maior grau pela pré-ativação das molas de fechamento.ABSTRACT AIM: the present study determined the force systems produced by T-loop and T-loop with helices, with employment of different alloys (stainless steel and beta

Control Multivariante Estadístico de Variables Discretas tipo Poisson

OpenAIRE

GARCIA BUSTOS, SANDRA LORENA

2016-01-01

En algunos casos, cuando el número de defectos de un proceso de producción tiene que ser controlada, la distribución de Poisson se emplea para modelar la frecuencia de estos defectos y para desarrollar un gráfico de control. En este trabajo se analiza el control de características de calidad p> 1 de Poisson . Cuando este control se necesita, hay dos enfoques principales: 1 - Un gráfico para cada variable de Poisson, el esquema múltiple.. 2 -. Sólo una gráfico para todas las variables, el sist...

Boundedness and stability for recurrent neural networks with variable coefficients and time-varying delays

International Nuclear Information System (INIS)

Liang Jinling; Cao Jinde

2003-01-01

In this Letter, the problems of boundedness and stability for a general class of non-autonomous recurrent neural networks with variable coefficients and time-varying delays are analyzed via employing Young inequality technique and Lyapunov method. Some simple sufficient conditions are given for boundedness and stability of the solutions for the recurrent neural networks. These results generalize and improve the previous works, and they are easy to check and apply in practice. Two illustrative examples and their numerical simulations are also given to demonstrate the effectiveness of the proposed results

Dissociating variability and effort as determinants of coordination.

Directory of Open Access Journals (Sweden)

Ian O'Sullivan

2009-04-01

Full Text Available When coordinating movements, the nervous system often has to decide how to distribute work across a number of redundant effectors. Here, we show that humans solve this problem by trying to minimize both the variability of motor output and the effort involved. In previous studies that investigated the temporal shape of movements, these two selective pressures, despite having very different theoretical implications, could not be distinguished; because noise in the motor system increases with the motor commands, minimization of effort or variability leads to very similar predictions. When multiple effectors with different noise and effort characteristics have to be combined, however, these two cost terms can be dissociated. Here, we measure the importance of variability and effort in coordination by studying how humans share force production between two fingers. To capture variability, we identified the coefficient of variation of the index and little fingers. For effort, we used the sum of squared forces and the sum of squared forces normalized by the maximum strength of each effector. These terms were then used to predict the optimal force distribution for a task in which participants had to produce a target total force of 4-16 N, by pressing onto two isometric transducers using different combinations of fingers. By comparing the predicted distribution across fingers to the actual distribution chosen by participants, we were able to estimate the relative importance of variability and effort of 1:7, with the unnormalized effort being most important. Our results indicate that the nervous system uses multi-effector redundancy to minimize both the variability of the produced output and effort, although effort costs clearly outweighed variability costs.

New traveling wave solutions to AKNS and SKdV equations

International Nuclear Information System (INIS)

Ozer, Teoman

2009-01-01

We analyze the traveling wave solutions of Ablowitz-Kaup-Newell-Segur (AKNS) and Schwarz-Korteweg-de Vries (SKdV) equations. As the solution method for differential equations we consider the improved tanh approach. This approach provides to transform the partial differential equation into the ordinary differential equation and then obtain the new families of exact solutions based on the solutions of the Riccati equation. The different values of the coefficients of the Riccati equation allow us to obtain new type of traveling wave solutions to AKNS and SKdV equations.

Variabilidade espacial de atributos químicos do solo sob diferentes usos e manejos Spatial variability of chemical attributes of a soil under different uses and managements

Directory of Open Access Journals (Sweden)

Eloiza Gomes Silva Cavalcante

2007-12-01

Full Text Available O uso e manejo do solo e da cultura são importantes condicionadores da variabilidade de atributos do solo. O trabalho foi desenvolvido em Selvíria (MS, com o objetivo de avaliar a variabilidade espacial do pH, potássio (K, cálcio (Ca, magnésio (Mg e saturação por bases (V em Latossolo Vermelho sob diferentes usos e manejos. Os solos foram amostrados em malha, com intervalos regulares de 2 m, perfazendo o total de 64 pontos, nas profundidades de 0,0-0,1 e 0,1-0,2 m, nas seguintes áreas: vegetação natural (Cerrado, plantio direto, plantio convencional e pastagem. As maiores variabilidades, medidas por meio do coeficiente de variação, foram observadas para K, Mg e Ca; o pH apresentou o menor coeficiente de variação nos diferentes usos e manejo do solo, e o atributo V, coeficiente de variação médio. Os sistemas preparo convencional e pastagem apresentaram os menores alcances quando comparado aos sistemas Cerrado e plantio direto.The use and management of soil and crop condition the variability of soil attributes directly. This study was conducted in Selvíria-MS, Brazil with the objective of evaluating the spatial variability of pH, potassium (K, calcium (Ca, magnesium (Mg and base saturation (% BS in an Oxisol under different use and management conditions. Soil samples were collected in a grid, in regular 2 m intervals, at 64 grid points, at depths of 0.0-0.1 m and 0.1-0.2 m, from areas of: native cerrado vegetation (savannah, annual crops under no-tillage, annual crops under conventional tillage, and pasture. The highest variabilities, as determined by the coefficient of variation, were observed for K, Mg and Ca, while the lowest coefficient of variation was found for pH in the different uses and management conditions. A medium coefficient of variation was observed for the %BS. The ranges of soils under conventional tillage and pasture systems were smaller than those under native vegetation and no-tillage.

Simplified model for a ventilated glass window under forced air flow conditions

International Nuclear Information System (INIS)

Ismail, K.A.R.; Henriquez, J.R.

2006-01-01

This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance

Simplified model for a ventilated glass window under forced air flow conditions

Energy Technology Data Exchange (ETDEWEB)

Ismail, K.A.R. [Depto. de Engenharia Termica e de Fluidos-FEM-UNICAMP CP: 6122 CEP 13083-970 Campinas, SP (Brazil); Henriquez, J.R. [Depto. de Eng. Mecanica-DEMEC, UFPE Av. Academico Helio Ramos, S/N CEP 50740-530, Recife, PE (Brazil)

2006-02-01

This paper presents a study on a ventilated window composed of two glass sheets separated by a spacing through which air is forced to flow. The proposed model is one dimensional and unsteady based upon global energy balance over the glass sheets and the flowing fluid. The external glass sheet of the cavity is subjected to variable heat flow due to the solar radiation as well as variable external ambient temperature. The exchange of radiation energy (infrared radiation) between the glass sheets is also included in the formulation. Effects of the spacing between the glass sheets, variation of the forced mass flow rate on the total heat gain and the shading coefficients are investigated. The results show that the effect of the increase of the mass flow rate is found to reduce the mean solar heat gain and the shading coefficients while the increase of the fluid entry temperature is found to deteriorate the window thermal performance. (author)

Forced heat convection in annular spaces; Convection forcee de la chaleur dans les espaces annulaires

Energy Technology Data Exchange (ETDEWEB)

Pelce, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1960-02-15

This report deals with the experimental study of forced heat convection in annular spaces through which flow of air is passing when a uniform heat flux is dissipated across the inner wall. These observations took place chiefly in the region where thermal equilibrium are not yet established. Amongst other things it became apparent that, both in the region where thermal equilibrium conditions are on the way to establishment and where they are already established, the following relationship held good: the longitudinal temperature gradient, either on the wall or in the fluid stream, is proportional to the heat flux dissipated q, and inversely proportional to the average flow rate V: dT/dx = B (q/V). From this result the next step is to express the variations of the local convection coefficient {alpha} (or of the Margoulis number M) in a relationship of the form: 1/M = {psi}(V) + F(x). If this relationship is compared with the classical empirical relationship {alpha} = KV{sup n} (where n is close to 0.8), the relationship: 1/M = {xi}V{sup 1-n} + F(x) is obtained ({xi} is a constant for a given annular space); from this it was possible to coordinate the whole set of experimental results. (author) [French] Il s'agit precisement de l'etude experimentale de la convection forcee de la chaleur dans des espaces annulaires parcourus par de l'air en ecoulement turbulent, lorsqu'on dissipe a travers la paroi interieure un flux de chaleur uniforme. Ces observations ont eu lieu principalement dans la region ou le regime thermique n'est pas encore etabli. Il est apparu, entre autre, qu'il existait, tant dans la region ou le regime thermique est en voie d'etablissement qu'en regime etabli, la relation suivante: le gradient longitudinal des temperatures, que ce soit sur la paroi ou dans l'ecoulement fluide, est proportionnel au flux de la chaleur dissipee q, et inversement proportionnel a la vitesse moyenne V de l'ecoulement: dT/dx = B (q/V). Ce resultat a pour consequence de traduire

Idées nouvelles concernant la variable critique de Leloup. Utilisation de cette variable dans le cas des graisses et dans le cas de l'eau New Ldeas About the Leloup Critical Variable. Use of This Variable for Lubricants and Water

Directory of Open Access Journals (Sweden)

Bozet J.

2006-11-01

Full Text Available Cet article est essentiellement consacré au fonctionnement. d'un palier lisse en conditions limites, les films édifiés à l'interface étant trop minces pour éviter les interactions de surface. L'auteur montre tout d'abord la relation qui existe entre la variable de Leloup, utilisée par un grand nombre de praticiens, et les caractéristiques du film élasto-hydrodynamique qui se développe aux environs du point critique. Il étudie ensuite le comportement de coussinets graphités lubrifiés à l'eau ; il introduit enfin la lubrification à la graisse de paliers lisses classiques. L'analyse des résultats obtenus au laboratoire permet de conclure à la validité de la variable L pour les deux fluides utilisés. A l'issue de son travail, l'auteur indique que la localisation du point critique relevé expérimentalement dans le cas d'une lubrification à la graisse dépend essentiellement des caractéristiques de l'huile de base, le savon ne jouant qu'un rôle très secondaire. This article mainly deals with the boundary lubrication of journal bearings in which the films at the interfaces are too thin to prevent surface friction. The article first describes the relation existing between the Leloup variable used by a great many technicians and the properties of the elastohydrodynamic film created in the area around the critical point. It then examines the behavior of water-lubricated graphite bearings before going on to the lubrication of conventional journal bearings with grease. An analysis of laboratory results leads to the conclusion that the L variable is valid for both types of fluids. The article concludes by situating the critical point determined experimentally on bearings lubricated with grease. The location of this critical point depends mainly on the properfies of the base oil, in which soap plays only a very secondary role.

Increased Force Variability Is Associated with Altered Modulation of the Motorneuron Pool Activity in Autism Spectrum Disorder (ASD).

Science.gov (United States)

Wang, Zheng; Kwon, Minhyuk; Mohanty, Suman; Schmitt, Lauren M; White, Stormi P; Christou, Evangelos A; Mosconi, Matthew W

2017-03-25

Force control deficits have been repeatedly documented in autism spectrum disorder (ASD). They are associated with worse social and daily living skill impairments in patients suggesting that developing a more mechanistic understanding of the central and peripheral processes that cause them may help guide the development of treatments that improve multiple outcomes in ASD. The neuromuscular mechanisms underlying force control deficits are not yet understood. Seventeen individuals with ASD and 14 matched healthy controls completed an isometric index finger abduction test at 60% of their maximum voluntary contraction (MVC) during recording of the first dorsal interosseous (FDI) muscle to determine the neuromuscular processes associated with sustained force variability. Central modulation of the motorneuron pool activation of the FDI muscle was evaluated at delta (0-4 Hz), alpha (4-10 Hz), beta (10-35 Hz) and gamma (35-60 Hz) frequency bands. ASD patients showed greater force variability than controls when attempting to maintain a constant force. Relative to controls, patients also showed increased central modulation of the motorneuron pool at beta and gamma bands. For controls, reduced force variability was associated with reduced delta frequency modulation of the motorneuron pool activity of the FDI muscle and increased modulation at beta and gamma bands. In contrast, delta, beta, and gamma frequency oscillations were not associated with force variability in ASD. These findings suggest that alterations of central mechanisms that control motorneuron pool firing may underlie the common and often impairing symptoms of ASD.

Variables que inciden en la violencia en barrios de Bogotá

Directory of Open Access Journals (Sweden)

Olga Marcela Cubides Salazar

2014-12-01

Full Text Available El artículo analiza los factores que más inciden en la violencia homicida en barrios de Bogotá (Colombia, tomando como casos de estudio 51 de ellos, entre los que se encuentran barrios con alto y bajo nivel de violencia. Se aborda la pregunta: ¿Por qué unos barrios tienen mayor manifestación de violencia que otros? Para responder se analizan variables explicativas que la literatura ha expuesto como posibles generadoras de violencia y, utilizando el método comparado y la herramienta del Comparative Qualitive Analysis (QCA, se identifican variables necesarias y suficientes que explicarían la presencia de violencia en los barrios de la ciudad. El trabajo concluye que la variable “expendio de droga” es la condición necesaria para la generación de violencia, pero no es suficiente. A su vez, el estudio muestra que variables comúnmente asociadas a la generación de violencia, como por ejemplo el expendio de licor, no explican altos niveles de violencia, si estos son analizados desde una visión “barrial”. El estudio utiliza información de campo proveniente de los numerosos trabajos de investigación de la Fundación Ideas para la Paz.

Alternatives to Pearson's and Spearman's Correlation Coefficients

OpenAIRE

Smarandache, Florentin

2008-01-01

This article presents several alternatives to Pearson's correlation coefficient and many examples. In the samples where the rank in a discrete variable counts more than the variable values, the mixtures that we propose of Pearson's and Spearman's correlation coefficients give better results.

Wind Forced Variability in Eddy Formation, Eddy Shedding, and the Separation of the East Australian Current

Science.gov (United States)

Bull, Christopher Y. S.; Kiss, Andrew E.; Jourdain, Nicolas C.; England, Matthew H.; van Sebille, Erik

2017-12-01

The East Australian Current (EAC), like many other subtropical western boundary currents, is believed to be penetrating further poleward in recent decades. Previous observational and model studies have used steady state dynamics to relate changes in the westerly winds to changes in the separation behavior of the EAC. As yet, little work has been undertaken on the impact of forcing variability on the EAC and Tasman Sea circulation. Here using an eddy-permitting regional ocean model, we present a suite of simulations forced by the same time-mean fields, but with different atmospheric and remote ocean variability. These eddy-permitting results demonstrate the nonlinear response of the EAC to variable, nonstationary inhomogeneous forcing. These simulations show an EAC with high intrinsic variability and stochastic eddy shedding. We show that wind stress variability on time scales shorter than 56 days leads to increases in eddy shedding rates and southward eddy propagation, producing an increased transport and southward reach of the mean EAC extension. We adopt an energetics framework that shows the EAC extension changes to be coincident with an increase in offshore, upstream eddy variance (via increased barotropic instability) and increase in subsurface mean kinetic energy along the length of the EAC. The response of EAC separation to regional variable wind stress has important implications for both past and future climate change studies.

Ergodicity for the Randomly Forced 2D Navier-Stokes Equations

International Nuclear Information System (INIS)

Kuksin, Sergei; Shirikyan, Armen

2001-01-01

We study space-periodic 2D Navier-Stokes equations perturbed by an unbounded random kick-force. It is assumed that Fourier coefficients of the kicks are independent random variables all of whose moments are bounded and that the distributions of the first N 0 coefficients (where N 0 is a sufficiently large integer) have positive densities against the Lebesgue measure. We treat the equation as a random dynamical system in the space of square integrable divergence-free vector fields. We prove that this dynamical system has a unique stationary measure and study its ergodic properties

Relationship between different push-off variables and start performance in experienced swimmers.

Science.gov (United States)

García-Ramos, Amador; Feriche, Belén; de la Fuente, Blanca; Argüelles-Cienfuegos, Javier; Strojnik, Vojko; Strumbelj, Boro; Štirn, Igor

2015-01-01

The objective of this study was to determine the relationship between different variables measured with a force plate during the swimming start push-off phase and start performance presented by times to 5, 10 and 15 m. Twenty-one women from the Slovenian national swimming team performed two different swim starts (freestyle and undulatory) on a portable force plate to a distance further than 15 m. Correlations between push-off variables and times to 5, 10 and 15 m were quantified through Pearson's product-moment correlation coefficient (r). The variables that significantly correlated (p  .05). Based on the results of this study, we can conclude that horizontal take-off velocity and average horizontal acceleration (calculated as the average horizontal force divided by swimmer's body mass) are the variables most related to swimming start performance in experienced swimmers, and therefore could be the preferred measures to monitor swimmers' efficiency during the push-off phase.

Step-to-step spatiotemporal variables and ground reaction forces of intra-individual fastest sprinting in a single session.

Science.gov (United States)

Nagahara, Ryu; Mizutani, Mirai; Matsuo, Akifumi; Kanehisa, Hiroaki; Fukunaga, Tetsuo

2018-06-01

We aimed to investigate the step-to-step spatiotemporal variables and ground reaction forces during the acceleration phase for characterising intra-individual fastest sprinting within a single session. Step-to-step spatiotemporal variables and ground reaction forces produced by 15 male athletes were measured over a 50-m distance during repeated (three to five) 60-m sprints using a long force platform system. Differences in measured variables between the fastest and slowest trials were examined at each step until the 22nd step using a magnitude-based inferences approach. There were possibly-most likely higher running speed and step frequency (2nd to 22nd steps) and shorter support time (all steps) in the fastest trial than in the slowest trial. Moreover, for the fastest trial there were likely-very likely greater mean propulsive force during the initial four steps and possibly-very likely larger mean net anterior-posterior force until the 17th step. The current results demonstrate that better sprinting performance within a single session is probably achieved by 1) a high step frequency (except the initial step) with short support time at all steps, 2) exerting a greater mean propulsive force during initial acceleration, and 3) producing a greater mean net anterior-posterior force during initial and middle acceleration.

Control Multivariable Centralizado con Desacoplo para Aerogeneradores de Velocidad Variable

Directory of Open Access Journals (Sweden)

Miguel E. González

2010-10-01

Full Text Available Resumen: El diseño de sistemas de control para aerogeneradores de velocidad variable representa un reto importante ya que se trata de procesos multivariables no lineales, con fuertes perturbaciones, diversas restricciones y gran interacción entre sus variables. Bajo este escenario se debe generar eficientemente la potencia eléctrica y al mismo tiempo regular la velocidad de giro de la turbina. En este trabajo se proponen varios esquemas de control multivariable, con el objetivo de mejorar el rendimiento de los aerogeneradores atenuando los efectos de la interacción entre sus variables. La solución propuesta se basa en controladores PID con diseños del tipo descentralizado, centralizado con diversas redes de desacoplo y un esquema con cuatro PI. El comportamiento del aerogenerador se describe mediante un modelo matemático no lineal, que se linealiza para obtener una matriz de funciones de transferencia, a partir de la cual se diseñan los controladores. Finalmente se realiza un análisis comparativo para determinar qué controlador presenta mejores resultados, aplicando perturbaciones con un modelo de la velocidad del viento y cambios aleatorios de la carga eléctrica. Palabras Clave: Aerogenerador, Control Multivariable, Modelado e Interacción

Global existence of periodic solutions of BAM neural networks with variable coefficients

International Nuclear Information System (INIS)

Guo Shangjiang; Huang Lihong; Dai Binxiang; Zhang Zhongzhi

2003-01-01

In this Letter, we study BAM (bidirectional associative memory) networks with variable coefficients. By some spectral theorems and a continuation theorem based on coincidence degree, we not only obtain some new sufficient conditions ensuring the existence, uniqueness, and global exponential stability of the periodic solution but also estimate the exponentially convergent rate. Our results are less restrictive than previously known criteria and can be applied to neural networks with a broad range of activation functions assuming neither differentiability nor strict monotonicity. Moreover, these conclusions are presented in terms of system parameters and can be easily verified for the globally Lipschitz and the spectral radius being less than 1. Therefore, our results should be useful in the design and applications of periodic oscillatory neural circuits for neural networks with delays

Bilateral movements increase sustained extensor force in the paretic arm.

Science.gov (United States)

Kang, Nyeonju; Cauraugh, James H

2018-04-01

Muscle weakness in the extensors poststroke is a common motor impairment. Unfortunately, research is unclear on whether bilateral movements increase extensor force production in the paretic arm. This study investigated sustained force production while stroke individuals maximally extended their wrist and fingers on their paretic arm. Specifically, we determined isometric force production in three conditions: (a) unilateral paretic arm, (b) unilateral nonparetic arm, and (c) bilateral (both arms executing the same movement simultaneously). Seventeen chronic stroke patients produced isometric sustained force by executing wrist and fingers extension in unilateral and bilateral contraction conditions. Mean force, force variability (coefficient of variation), and signal-to-noise ratio were calculated for each contraction condition. Analysis of two-way (Arm × Type of Condition: 2 × 2; Paretic or Nonparetic Arm × Unilateral or Bilateral Conditions) within-subjects ANOVAs revealed that the bilateral condition increased sustained force in the paretic arm, but reduced sustained force in the nonparetic arm. Further, although the paretic arm exhibited more force variability and less signal-to-noise ratio than the nonparetic arm during a unilateral condition, there were no differences when participants simultaneously executed isometric contractions with both arms. Our unique findings indicate that bilateral contractions transiently increased extensor force in the paretic arm. Implications for Rehabilitation Bilateral movements increased isometric wrsit extensor force in paretic arms and redcued force in nonparetic arms versus unilateral movements. Both paretic and nonparetic arms produced similar force variability and signal-to-noise ratio during bilateral movements. Increased sustained force in the paretic arm during the bilateral condition indicates that rehabilitation protocols based on bilateral movements may be beneficial for functional recovery.

Heat transfer coefficients obtainment by means of naphthalene sublimation in air; Obtencion de coeficientes de transferencia de calor por medio de la tecnica de sublimacion de naftalina en aire

Energy Technology Data Exchange (ETDEWEB)

Perez Galindo, Jose Arturo; Garcia Gutierrez, Alonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1986-12-31

This work describes the experimental technique for the sublimation of naphthalene in air which measures heat transfer coefficients through the use of the analogy between the transference phenomena of heat and mass. The technique used to substitute the experimental measurements of heat transfer, in which it is difficult to control the border thermal conditions, when they are dimmed by the omnipresent problem of heat conduction through the walls of the transference surfaces. Two examples are included of the application technique and its potential is outlined. [Espanol] En este trabajo se describe la tecnica experimental de la sublimacion de naftalina en aire mediante la que se miden coeficientes de transferencia de masa. Los datos asi obtenidos pueden convertirse en coeficientes de transferencia de calor a traves del uso de la analogia entre los fenomenos de transferencia de calor y masa. La tecnica se utiliza para substituir las mediciones experimentales de transferencia de calor, en las que es dificil controlar las condiciones termicas de frontera, cuando las empana el problema omnipresente de la conduccion de calor a traves de las paredes de las superficies de transferencia. Se incluyen dos ejemplos de la aplicacion de la tecnica y se destaca su potencial.

Heat transfer coefficients obtainment by means of naphthalene sublimation in air; Obtencion de coeficientes de transferencia de calor por medio de la tecnica de sublimacion de naftalina en aire

Energy Technology Data Exchange (ETDEWEB)

Perez Galindo, Jose Arturo; Garcia Gutierrez, Alonso [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1985-12-31

This work describes the experimental technique for the sublimation of naphthalene in air which measures heat transfer coefficients through the use of the analogy between the transference phenomena of heat and mass. The technique used to substitute the experimental measurements of heat transfer, in which it is difficult to control the border thermal conditions, when they are dimmed by the omnipresent problem of heat conduction through the walls of the transference surfaces. Two examples are included of the application technique and its potential is outlined. [Espanol] En este trabajo se describe la tecnica experimental de la sublimacion de naftalina en aire mediante la que se miden coeficientes de transferencia de masa. Los datos asi obtenidos pueden convertirse en coeficientes de transferencia de calor a traves del uso de la analogia entre los fenomenos de transferencia de calor y masa. La tecnica se utiliza para substituir las mediciones experimentales de transferencia de calor, en las que es dificil controlar las condiciones termicas de frontera, cuando las empana el problema omnipresente de la conduccion de calor a traves de las paredes de las superficies de transferencia. Se incluyen dos ejemplos de la aplicacion de la tecnica y se destaca su potencial.

Polarization extinction ratio of the polarization crosstalk caused by point pressure force in the polarization-maintaining fiber

Science.gov (United States)

Mukhtubayev, Azamat B.; Aksarin, Stanislav M.; Strigalev, Vladimir E.

2017-11-01

A study of the orthogonal polarization modes crosstalk changes in the point of different mechanical actions (pressure force) in the polarization-maintaining fiber with straining elliptical cladding is presented. It was found that by increasing of the pressure force the polarization extinction ratio increases nonlinearly. Also revealed the dependence of the extinction coefficient and the angle between vector of the mechanical action and polarization axes of the test fiber, which leads to change the extinction coefficient variable from -57 dB to -25 dB under the pressure force of 0.7 N. Also it was found that the cross angle of the fiber axes doesn't influence on the extinction ratio value of the mechanical induced polarization crosstalk.

Karl Polanyi, la Nouvelle sociologie économique et les forces du marché

Directory of Open Access Journals (Sweden)

Ronan Le Velly

2008-12-01

Full Text Available Cet article montre en quoi plusieurs auteurs de la Nouvelle sociologie économique tendent à adopter un regard incomplet sur les forces du marché. Pour cela, l’auteur distingue deux notions d’encastrement renvoyant pour la première à un cadre méthodologique institutionnaliste et pour la seconde à l’observation du poids variable des forces du marché. Il établit qu’autant des sociologues classiques comme Weber ou Polanyi ont su coupler ces deux approches, autant plusieurs travaux majeurs de la Nouvelle sociologie économique, notamment ceux de Zelizer, de Fligstein et de Biggart, adoptent la première perspective mais ne traitent que de façon partielle de la seconde. L’auteur met particulièrement en cause les objets de recherche retenus par ces derniers auteurs, dès lors que sont systématiquement privilégiées des situations où les forces du marché sont tenues à l’écart.This article shows how many authors of the New Economic Sociology tend to adopt an incomplete view of market forces. The author distinguishes two notions of embeddedness, one related to the institutionalist theories and the second to the observation of the variable weight of market forces. It is established that classical sociologists such as Weber or Polanyi have joined these two approaches, while manyu works of the New sociological economy, for examle those of Zelizer, Fligstein or Biggart adopt the first perspective, but only treat the second partially. The author particularly questions the research objects chosen by these authors, since he considers that they generally refer to situations where market forces are held at bay.

Influence of surface modification on friction coefficient of the titanium-elastomer couple.

Science.gov (United States)

Chladek, Wiesław; Hadasik, Eugeniusz; Chladek, Grzegorz

2007-01-01

This paper presents the results of a study of the friction coefficient of titanium-elastomer couple. The study was carried out with a view to potential future utilization of its results for constructing retentive elements of implanted prostheses. Changes in the friction force were recorded while removing titanium specimens placed between two silicone counter specimens made of Ufi Gel. The influence of the titanium specimen movement speed in relation that of to the counter specimens and the influence of clamping force on the friction force were assessed. Additionally, the surface roughness of titanium specimens differed; in one case, titanium was coated with polyethylene. The effect of introducing artificial saliva between the cooperating surfaces on the friction force and friction coefficient was analyzed as well. Based on the characteristics recorded, the possibilities of shaping the friction coefficient have been assessed, since it is the friction coefficient that determines effective operation of a friction couple through increasing the titanium specimen roughness. The artificial saliva being introduced between the specimens reduces considerably the friction coefficient through a change of the phenomenon model. An increase in the pressure force for the specimens of high roughness entails a reduction of the friction coefficient. The study carried out allows us to identify the roughness parameters, which in turn will enable obtaining the prescribed retention force for friction/membrane couplings.

Una metodología para la predicción espacial de una variable escalar georeferenciada basada en su información y la de una variable funcional / A methodology for the spatial prediction of a scalar variable geographically referenced based on its information and a functional variable

OpenAIRE

Herrera Pérez, Luis Antonio

2012-01-01

En geoestadística se resuelve el problema de predicción espacial de una variable aleatoria, vector aleatorio o variable aleatoria funcional cuando se tiene la información de un proceso estocástico (o campo aleatorio) univariado, multivariado o funcional, respectivamente. En este trabajo se combinan algunas técnicas geoestadísticas multivariadas y funcionales con el objetivo de proponer un predictor espacial de una variable aleatoria escalar cuando se dispone simultáneamente de realizaciones d...

Variabilidade espacial de atributos físicos de um Latossolo Vermelho sob cultivo de cana-de-açúcar Spatial variability of physical attributes of Oxisol under sugarcane crop

Directory of Open Access Journals (Sweden)

Zigomar M. Souza

2004-04-01

Full Text Available O uso intensivo dos Latossolos no nordeste do Estado de São Paulo com a cana-de-açúcar, com preparo superficial excessivo e queima dos resíduos, modifica significativamente as propriedades físicas do solo. Este trabalho teve como objetivo avaliar a variabilidade espacial de atributos físicos de um Latossolo Vermelho eutroférrico sob cultivo de cana-de-açúcar, através da geoestatística. Os solos foram amostrados nos pontos de cruzamento de uma malha, com intervalos regulares de 10 m, nas profundidades de 0 - 0,2; 0,2 - 0,4 e 0,4 - 0,6 m, totalizando 100 pontos; em cada amostra foram determinadas porosidade total, macroporosidade, microporosidade e densidade do solo. O coeficiente de variação indicou variabilidade baixa para porosidade total nas profundidades 0,2 - 0,4 e 0,4 - 0,6 m, microporosidade na profundidade de 0,2 - 0,4 m e densidade do solo em todas as profundidades estudadas, e média para microporosidade nas profundidades de 0 - 0,2 e 0,4 - 0,6 m e porosidade total na profundidade de 0 - 0,2 m, enquanto a macroporosidade apresentou variação alta. Os maiores alcances foram observados nas profundidades de 0,2 - 0,4 m e 0,4 - 0,6 m para todos os atributos estudados. Os altos valores para a densidade do solo, sobretudo na profundidade de 0,2 - 0,4 m, promoveram redução da porosidade total, microporosidade em particular, na macroporosidade, indicando uma compactação nesta camada. Pequenas variações nas formas do relevo condicionam variabilidade diferenciada para os atribultos físicos do solo.The intensive use of the Oxisols in the northeast of São Paulo State with the sugarcane using extreme superficial preparation and burning of the residues significantly modifies the physical properties of the soil. This work had the objective to evaluate the spatial variability of physical attributes of an Oxisol under sugarcane crop, by applying the technique of geostatistics. The soils were collected at the grid points, with

El dominio de la variable: variable didáctica en el álgebra escolar

OpenAIRE

Torres, Ligia; Calderón, Luis

2000-01-01

En el análisis del discurso matemático manifiesto en un texto de álgebra escolar, hemos encontrado que el dominio de la variable es un concepto presente desde la aparición de las expresiones generalizadoras de operaciones, relaciones y propiedades de los números reales, que tan sólo se explicita en el estudio del álgebra de las expresiones algebraicas. Este concepto, junto con el de conjunto de referencia de una expresión y con el de conjunto solución, juega un papel protagónico en diferentes...

Research on partial coefficients for design of quarter-circular caisson breakwater

Science.gov (United States)

Qie, Luwen; Zhang, Xiang; Jiang, Xuelian; Qin, Yinan

2013-03-01

The quarter-circular caisson breakwater (QCB) is a new type of breakwater, and it can be applied in deepwater. The stability of QCB under wave force action can be enhanced, and the rubble mound engineering can be less than that of semi-circular breakwaters in deepwater. In order to study the wave force distribution acting on the QCB, to find wave force formula for this type of breakwater, firstly in this paper, the distribution characteristics of the horizontal force, the downward vertical force and the uplift force on the breakwater were gotten based on physical model wave flume experiments and on the analysis of the wave pressure experimental data. Based on a series of physical model tests acted by irregular waves, a kind of calculation method, which was modified by Goda formula, was proposed to carry out the wave force on the QCB. Secondly, the reliability method with correlated variables was adopted to analyze the QCB, considering the high correlation between wave forces or moments. Utilizing the observed wave data in engineering field, the reliability index and failure probability of QCB were obtained. Finally, a factor Q=0.9 is given to modify the zero pressure height above SWL of QCB, and wave force partial coefficient 1.34 to the design expressions of QCB for anti-sliding, as well as 1.67 for anti-overturning, were presented.

Updating the ranking of the coefficients of variation from maize experiments=Atualização da proposta de classificação dos coeficientes de variação para a cultura do milho

Directory of Open Access Journals (Sweden)

Luciano Moreira Rezende

2012-01-01

Full Text Available The objective of this study was to update the ranking of the coefficients of variation (CVs from maize experiments and evaluate the accuracy of the data from the latest Brazilian publications. We rank-ordered the CVs for grain yield, plant and ear heights, number of ears per plant, and weight of commercial ears, except for the weight of 100 grains. The data were obtained from 143 scientific papers published from 2005 to 2010. The classification was based on the average (m and standard deviation (SD and the CVs were ranked as low, intermediate, high and very high. All of the random variables had the CVs normally distributed. For most of the traits, we observed a large difference between the ranks from Scapim and Pimentel Gomes. In summary, the coefficients of variation have to be classified for each variable, significant improvement occurred in the accuracy of the national maize experiments in the last 15 years, and they still require periodic updating.O objetivo desse trabalho foi fazer a atualização na proposta de classificação dos coeficientes de variação (CV para a cultura do milho e avaliar a qualidade dos dados dos artigos mais recentes publicados no Brasil. Os CV das diferentes variáveis aleatórias foram obtidos a partir da consulta de 143 artigos científicos publicados de 2005 e 2010. As faixas de classificação dos (CV foram baseadas na média (m e no desvio-padrão (DP da seguinte forma: baixo; médio; alto; muito alto. Todos os cv das variáveis aleatórias apresentaram distribuição normal. Foi possível observar que para a maioria dos caracteres avaliados houve uma grande diferença entre a classificação proposta e a de Pimentel-Gomes. Houve melhoria significativa na qualidade experimental na cultura do milho para os principais caracteres produtividade de grãos, alturas de planta e espiga, número de espigas por planta e peso de espigas comerciais, sendo a única exceção o peso de 100 grãos. Conclui-se que as faixas

Apparent Coefficient of Friction of Wheat on Denim.

Science.gov (United States)

Schwab, Charles V

2017-07-31

Calculation of the extraction force for a grain entrapment victim requires a coefficient of friction between the grain and the surface of the victim. Because denim is a common fabric for the work clothes that cover entrapment victims, the coefficient of friction between grain and denim becomes necessary. The purpose of this research was to calculate the apparent coefficient of friction of wheat on denim fabric using a proven procedure. The expectation is to improve the current understanding of conditions that influence extraction forces for victims buried in wheat. The apparent coefficient of friction of wheat on denim fabric was calculated to be 0.167 with a standard deviation of ±0.013. The wheat had a moisture content of 10.7% (w.b.) and bulk density of 778.5 kg m-3. The apparent coefficient of friction of wheat on denim was not significantly affected by pull speeds of 0.004, 0.008, and 0.021 mm s-1 nor normal grain pressures of 3.2, 4.8, 6.3, 7.9, and 11.1 kPa. This is a beginning of understanding the conditions that influence the extraction forces for grain entrapment victims. Copyright© by the American Society of Agricultural Engineers.

Inter-annual and spatial variability of Hamon potential evapotranspiration model coefficients

Science.gov (United States)

McCabe, Gregory J.; Hay, Lauren E.; Bock, Andy; Markstrom, Steven L.; Atkinson, R. Dwight

2015-01-01

Monthly calibrated values of the Hamon PET coefficient (C) are determined for 109,951 hydrologic response units (HRUs) across the conterminous United States (U.S.). The calibrated coefficient values are determined by matching calculated mean monthly Hamon PET to mean monthly free-water surface evaporation. For most locations and months the calibrated coefficients are larger than the standard value reported by Hamon. The largest changes in the coefficients were for the late winter/early spring and fall months, whereas the smallest changes were for the summer months. Comparisons of PET computed using the standard value of C and computed using calibrated values of C indicate that for most of the conterminous U.S. PET is underestimated using the standard Hamon PET coefficient, except for the southeastern U.S.

Soliton solution for nonlinear partial differential equations by cosine-function method

International Nuclear Information System (INIS)

Ali, A.H.A.; Soliman, A.A.; Raslan, K.R.

2007-01-01

In this Letter, we established a traveling wave solution by using Cosine-function algorithm for nonlinear partial differential equations. The method is used to obtain the exact solutions for five different types of nonlinear partial differential equations such as, general equal width wave equation (GEWE), general regularized long wave equation (GRLW), general Korteweg-de Vries equation (GKdV), general improved Korteweg-de Vries equation (GIKdV), and Coupled equal width wave equations (CEWE), which are the important soliton equations

Anthropogenic radiative forcing of southern African and Southern Hemisphere climate variability and change

CSIR Research Space (South Africa)

Engelbrecht, FA

2014-10-01

Full Text Available of stratospheric ozone, greenhouse gasses, aerosols and sulphur dioxide, can improve the model's skill to simulate inter-annual variability over southern Africa. The paper secondly explores the role of different radiative forcings of future climate change over...

The solar forcing on the 7Be-air concentration variability at ground level

International Nuclear Information System (INIS)

Talpos, Simona

2004-01-01

This paper analyses the correlation between the temporal and spatial variability of 7 Be-air concentration at ground level and the amount of precipitation. There were used the measured data from 26 stations distributed on North America, South America, Australia and Antarctica. The variability study was made using EOF and principal components analysis. The presented results show that the variability of 7 Be air concentration at ground level is simultaneously influenced by the solar cycle and some atmospheric processes like precipitation, turbulent transport, advection, etc. The solar forcing on the 7 Be variability at ground level was outlined for time-scales longer than 1 year and can be considered a global phenomenon. The atmospheric processes influence the 7 Be variability for scale shorter than one year and can be considered a local phenomenon. (author)

Nonlinear dynamics; Proceedings of the International Conference, New York, NY, December 17-21, 1979

Science.gov (United States)

Helleman, R. H. G.

1980-01-01

Papers were presented on turbulence, ergodic and integrable behavior, chaotic maps and flows, chemical and fully developed turbulence, and strange attractors. Specific attention was given to measures describing a turbulent flow, stochastization and collapse of vortex systems, a subharmonic route to turbulent convection, and weakly nonlinear turbulence in a rotating convection layer. The Korteweg-de Vries and Hill equations, plasma transport in three dimensions, a horseshoe in the dynamics of a forced beam, and the explosion of strange attractors exhibited by Duffing's equation were also considered.

The effect of electrohydrodynamic force on the lift coefficient of a NACA 0015 airfoil

Science.gov (United States)

Yusof, Y.; Hossain, A.; Abdullah, A. H.; Nasir, Rizal M. E.; Hamid, A.; Muthmainnah, N.; N, M.

2017-11-01

Lift, the force component that is perpendicular to the line of flight, is generated when a small aircraft moves through the air. With the help of the sets of flaps and slats on its wing, the pilot controls his aircraft manoeuvring in the air. In this study, we preferred to cut the drawbacks of the flaps system by introducing the electrohydrodynamic actuator. Widely known as plasma actuator, it is able to improve the induced lift force as well as the efficiency of a small aircraft system. A dielectric-barrier-discharge actuator using a 6 kV AC power supply was developed and tested on a NACA 0015 airfoil using copper as the electrodes and kapton as its dielectric component. The experimental results showed that it was successful in presenting a positive effect of the plasma actuator on the lift coefficient of the airfoil at smaller angle of attack, where enhancements ranged between 0.7% and 1.8%. However, at a higher angle, the results were not as swayed as it was desired since the energy exerted by the plasma actuator on the lift performance of the airfoil was inadequate. Further tests are needed using higher rated voltage supply and other equipment to improve the capability of the actuator in refining the aerodynamic performance of the airfoil.

Psychophysical evaluation of a variable friction tactile interface

Science.gov (United States)

Samur, Evren; Colgate, J. Edward; Peshkin, Michael A.

2009-02-01

This study explores the haptic rendering capabilities of a variable friction tactile interface through psychophysical experiments. In order to obtain a deeper understanding of the sensory resolution associated with the Tactile Pattern Display (TPaD), friction discrimination experiments are conducted. During the experiments, subjects are asked to explore the glass surface of the TPaD using their bare index fingers, to feel the friction on the surface, and to compare the slipperiness of two stimuli, displayed in sequential order. The fingertip position data is collected by an infrared frame and normal and translational forces applied by the finger are measured by force sensors attached to the TPaD. The recorded data is used to calculate the coefficient of friction between the fingertip and the TPaD. The experiments determine the just noticeable difference (JND) of friction coefficient for humans interacting with the TPaD.

Collisionless damping of dust-acoustic waves in a charge varying dusty plasma with nonextensive ions

Energy Technology Data Exchange (ETDEWEB)

Amour, Rabia; Tribeche, Mouloud [Faculty of Physics, Theoretical Physics Laboratory (TPL), Plasma Physics Group (PPG), University of Bab-Ezzouar, USTHB, B.P. 32, El Alia, Algiers 16111 (Algeria)

2014-12-15

The charge variation induced nonlinear dust-acoustic wave damping in a charge varying dusty plasma with nonextensive ions is considered. It is shown that the collisionless damping due to dust charge fluctuation causes the nonlinear dust acoustic wave propagation to be described by a damped Korteweg-de Vries (dK-dV) equation the coefficients of which depend sensitively on the nonextensive parameter q. The damping term, solely due to the dust charge variation, is affected by the ion nonextensivity. For the sake of completeness, the possible effects of nonextensivity and collisionless damping on weakly nonlinear wave packets described by the dK-dV equation are succinctly outlined by deriving a nonlinear Schrödinger-like equation with a complex nonlinear coefficient.

Collisionless damping of dust-acoustic waves in a charge varying dusty plasma with nonextensive ions

International Nuclear Information System (INIS)

Amour, Rabia; Tribeche, Mouloud

2014-01-01

The charge variation induced nonlinear dust-acoustic wave damping in a charge varying dusty plasma with nonextensive ions is considered. It is shown that the collisionless damping due to dust charge fluctuation causes the nonlinear dust acoustic wave propagation to be described by a damped Korteweg-de Vries (dK-dV) equation the coefficients of which depend sensitively on the nonextensive parameter q. The damping term, solely due to the dust charge variation, is affected by the ion nonextensivity. For the sake of completeness, the possible effects of nonextensivity and collisionless damping on weakly nonlinear wave packets described by the dK-dV equation are succinctly outlined by deriving a nonlinear Schrödinger-like equation with a complex nonlinear coefficient

Influência de variáveis do treinamento contra-resistência sobre a força muscular de idosos: uma revisão sistemática com ênfase nas relações dose-resposta Influencia de las variables de entrenamiento contra-resistencia sobre la fuerza muscular de ancianos: una revisión sistemática con énfasis en las relaciones dosis-respuesta Influence of counter-resistance training variables on elderly muscular strength: a systematic review with emphasis on dose/response relationships

Directory of Open Access Journals (Sweden)

Nádia Lima da Silva

2007-02-01

tiene aún muy claro cuál es la mejor combinación de esas variables para una óptima relación dosis-respuesta en personas ancianas. El objetivo de este estudio ha sido analizar las investigaciones sobre entrenamiento de fuerza para ancianos, mediante una revisión sistemática, con el propósito de identificar tendencias comunes en términos de efectos del entrenamiento provocados por la manipulación de estas variables. Una vez definidos los criterios de inclusión, fueron seleccionados 22 estudios, agrupados por semejanza de tratamiento (nº de series, frecuencia semanal, intensidad, intervalos y orden de los ejercicios. Técnicas de estadística descriptiva auxiliaron en la determinación de posibles tendencias en las relaciones dosis-respuesta. Al identificarse, esas tendencias fueron analizadas cualitativamente. De todas las variables revisadas, solamente para la intensidad de sobrecarga fueron encontradas evidencias, lo que permite afirmar que cargas mayores serían más eficaces para inducir un aumento de fuerza a esa edad. En relación a las demás variables, los resultados disponibles en la literatura no dan respaldo para realizar inferencias seguras respecto al mejor delineamiento de programas de entrenamiento que alíen, al mismo tiempo, efectividad y seguridad. Por tanto, se recomienda que estudios posteriores sean realizados para comparar experimentalmente los efectos de la manipulación de esas variables sobre la fuerza muscular de ancianos.Muscular force is considered an important component of physical exercise programs. The results of this type of training depend on the combination of the number of repetitions, series, overload, sequence and intervals between series and exercises. However, it is still not very clear yet what the best combination of these variables for a good stimulus/response relationship in elderly people is. The objective of this study was to analyze the research on power-training for elderly people by means of systematic revision

Principle and Basic Characteristics of Variable-Magnetic-Force Memory Motors

Science.gov (United States)

Sakai, Kazuto; Yuki, Kazuaki; Hashiba, Yutaka; Takahashi, Norio; Yasui, Kazuya; Kovudhikulrungsri, Lilit

A reduction in the power consumed by motors is required for energy saving in the case of electrical appliances and electric vehicles (EV). The motors used for operating these apparatus operate at variable speeds. Further, the motors operate with small load in stationary mode and with large load in start-up mode. A permanent magnet motor can operate at the rated power with a high efficiency. However, the efficiency is lower at small load or high speed because the large constant magnetic force results in substantial core loss. Furthermore, the flux-weakening current that depresses voltage at high speed leads to significant copper loss. Therefore, we have developed a new technique for controlling the magnetic force of permanent magnet on the basis of the load or speed of the motor. In this paper, we propose the novel motor that can vary magnetic flux and we clarify the principle.

Oblique Interaction of Dust-ion Acoustic Solitons with Superthermal Electrons in a Magnetized Plasma

Science.gov (United States)

Parveen, Shahida; Mahmood, Shahzad; Adnan, Muhammad; Qamar, Anisa

2018-01-01

The oblique interaction between two dust-ion acoustic (DIA) solitons travelling in the opposite direction, in a collisionless magnetized plasma composed of dynamic ions, static dust (positive/negative) charged particles and interialess kappa distributed electrons is investigated. By employing extended Poincaré-Lighthill-Kuo (PLK) method, Korteweg-de Vries (KdV) equations are derived for the right and left moving low amplitude DIA solitons. Their trajectories and corresponding phase shifts before and after their interaction are also obtained. It is found that in negatively charged dusty plasma above the critical dust charged to ion density ratio the positive polarity pulse is formed, while below the critical dust charged density ratio the negative polarity pulse of DIA soliton exist. However it is found that only positive polarity pulse of DIA solitons exist for the positively charged dust particles case in a magnetized nonthermal plasma. The nonlinearity coefficient in the KdV equation vanishes for the negatively charged dusty plasma case for a particular set of parameters. Therefore, at critical plasma density composition for negatively charged dust particles case, the modified Korteweg-de Vries (mKdV) equations having cubic nonlinearity coefficient of the DIA solitons, and their corresponding phase shifts are derived for the left and right moving solitons. The effects of the system parameters including the obliqueness of solitons propagation with respect to magnetic field direction, superthermality of electrons and concentration of positively/negatively static dust charged particles on the phase shifts of the colliding solitons are also discussed and presented numerically. The results are applicable to space magnetized dusty plasma regimes.

Probability based calibration of pressure coefficients

DEFF Research Database (Denmark)

Hansen, Svend Ole; Pedersen, Marie Louise; Sørensen, John Dalsgaard

2015-01-01

Normally, a consistent basis for calculating partial factors focuses on a homogeneous reliability index neither depending on which material the structure is constructed of nor the ratio between the permanent and variable actions acting on the structure. Furthermore, the reliability index should n...... the characteristic shape coefficients are based on mean values as specified in background documents to the Eurocodes. Importance of hidden safeties judging the reliability is discussed for wind actions on low-rise structures....... not depend on the type of variable action. A probability based calibration of pressure coefficients have been carried out using pressure measurements on the standard CAARC building modelled on scale of 1:383. The extreme pressures measured on the CAARC building model in the wind tunnel have been fitted.......3, the Eurocode partial factor of 1.5 for variable actions agrees well with the inherent uncertainties of wind actions when the pressure coefficients are determined using wind tunnel test results. The increased bias and uncertainty when pressure coefficients mainly are based on structural codes lead to a larger...

Requerimento hídrico e coeficiente de cultura da cana-de-açúcar irrigada no semiárido brasileiro Water requirement and crop coefficient of irrigated sugarcane in a semi-arid region

Directory of Open Access Journals (Sweden)

Thieres G. F. da Silva

2012-01-01

Full Text Available O objetivo deste trabalho foi determinar o requerimento hídrico e o coeficiente de cultura (Kc da cana-de-açúcar irrigada durante o ciclo de soca, variedade RB 92-579, na região semiárida do Submédio do Vale do São Francisco. O experimento foi conduzido em área de cultivo comercial de cana-de-açúcar situada no município de Juazeiro, BA. Obteve-se o requerimento hídrico da cultura por meio do método do Balanço de Energia Razão de Bowen. Foram monitoradas também a biomassa acumulada e a fração da radiação fotossinteticamente ativa interceptada pela cultura (fRFA. Com os resultados constatou-se que a evapotranspiração da cana-de-açúcar atingiu uma taxa média diária de 4,7 mm, em resposta ao acúmulo de biomassa e, mas a fRFA apresentou, entretanto, influência do tombamento da cultura durante a fase de crescimento máximo. O requerimento hídrico total da cana-de-açúcar foi de 1710 mm, e o Kc atingiu o valor médio de 1,10 na fase de crescimento máximo. As equações de estimativa do Kc mensal, tendo graus dias acumulados e dias após o corte como variáveis independentes apresentaram ótimos ajustes (R2 ~ 0,95 e 0,98 e consideram a redução nos valores de Kc devida ao tombamento da cultura.The objective of this study was to determine the water requirement and crop coefficient of the irrigated sugarcane, variety RB 92-579, in the semi-arid region of the lower middle of São Francisco Valley. The experiment was carried out in a commercial area of sugarcane located in the municipality of Juazeiro in the State of Bahia. The crop water requirement was estimated with the Bowen Ratio Energy Balance method. The accumulated biomass and the photosynthetic active radiation intercepted (fPAR by the crop were monitored. The sugarcane evapotranspiration reached a mean value of 4.7 mm d-1 in response to fPAR and accumulated biomass; however presented influence of the crop lodging during the maximum growth phase. The total water

A variable-coefficient unstable nonlinear Schroedinger model for the electron beam plasmas and Rayleigh-Taylor instability in nonuniform plasmas: Solutions and observable effects

International Nuclear Information System (INIS)

Gao Yitian; Tian Bo

2003-01-01

A variable-coefficient unstable nonlinear Schroedinger model is hereby investigated, which arises in such applications as the electron-beam plasma waves and Rayleigh-Taylor instability in nonuniform plasmas. With computerized symbolic computation, families of exact analytic dark- and bright-soliton-like solutions are found, of which some previously published solutions turn out to be the special cases. Similarity solutions also come out, which are expressible in terms of the elliptic functions and the second Painleve transcendent. Some observable effects caused by the variable coefficient are predicted, which may be detected in the future with the relevant space or laboratory plasma experiments with nonuniform background existing

The effective lifetime and temperature coefficient in a coupled fast-thermal reactor; Temps de vie effectif et coefficient de temperature dans un reacteur a couplage neutrons rapides-neutrons thermiques; Ehffektivnyj srok zhizni i temperaturnyj koehffitsient nejtronov v dvoyakom reaktore na bystrykh i teplovykh nejtronakh; Vida efectiva y coeficiente de temperatura en un reactor con acoplamiento rapido-termico

Energy Technology Data Exchange (ETDEWEB)

Haefele, W. [Kernforschungszentrum, Karlsruhe (Germany)

1962-03-15

The theory of coupled systems was extensively developed by Avery and co-workers at the Argonne National Laboratory. One of the main points of interest in a coupled system is the larger effective lifetime of neutrons. The effect of the thermal component acts as a sort of neutron-delayer. As in the theory of delayed neutrons the delaying effect disappears if the reactivity worth is high enough to make the fast component critical by itself. In the study a coupled reactor is considered where the fast component suffers a sudden reactivity step {alpha}{sub 0}. Because of the increasing power-level the temperature rises and two temperature coefficients start to work: the temperature coefficient of the fast component and the temperature coefficient of the thermal component. The problem is considered with one group of delayed neutrons (in the ordinary meaning). A formalism is given to express the effective lifetime and temperature coefficient during the different stages of the excursion. Excursions for different {alpha}{sub 0} are given so that the limit of fast-reactor kinetics is reached. (author) [French] La theorie des systemes a couplage a ete mise au point par Avery et ses collaborateurs au Laboratoire national d'Argonne. L'une des caracteristique les plus interessantes d'un systeme a couplage est que le temps de vie effectif des neutrons est plus long. L'effet de la partie thermique contribue en quelque sorte a retarder les neutrons. Comme dans la theorie des neutrons retardes, l'effet de retardement disparait lorsque la reactivite a une valeur suffisamment elevee pour rendre la partie rapide critique par elle-meme. L'auteur du memoire considere un reacteur a couplage dont la partie rapide subit un saut instantane de reactivite, {alpha}{sub 0}. La temperature s'eleve a cause de l'augmentation de puissance et deux coefficients de temperature commencent a s'appliquer: le coefficient de temperature de la partie rapide et le coefficient de temperature de la partie

Influencia de variables psicológicas en el rendimiento de jugadores amateurs de golf

Directory of Open Access Journals (Sweden)

Susana Irazusta

2006-01-01

Full Text Available El propósito de la presente investigación es analizar las variaciones del estado de ánimo intracompetición en los jugadores amateurs de golf, así como analizar la influencia que tiene el grado de confianza y otras variables motivacionales en el resultado de la competición. Se realizó la investigación con un total de 296 jugadores y se pasaron los cuestionarios a cada jugador en tres momentos, antes, durante y después de la competición.Una vez analizados los datos se constató que existen grandes fluctuaciones en el estado de ánimo de los jugadores y que el resultado esperado sufre modificaciones a lo largo de la competición.

A novel centrifuge for animal physiological researches in hypergravity and variable gravity forces

Science.gov (United States)

Kumei, Yasuhiro; Hasegawa, Katsuya; Inoue, Katarzyna; Zeredo, . Jorge; Kimiya Narikiyo, .; Maezawa, Yukio; Yuuki Watanabe, .; Aou, Shuji

2012-07-01

Understanding the physiological responses to altered gravitational environments is essential for space exploration and long-term human life in space. Currently available centrifuges restrict experimentation due to limited space for laboratory equipments. We developed a medium-sized disc-type centrifuge to conduct ground-based studies on animal physiological response to hypergravity and variable gravity forces, which features the following advantages: 1) It enables simultaneous examination into the effects of various gravity levels including rotation control. 2) Beside the constant G force, variable G forces (delta-G) can be loaded to generate gravitational acceleration and deceleration. 3) Multiple imaging techniques can be used, such as high-speed video (16 channels wireless) and photography, X-ray, and infra-red imaging. 4) Telemetry is available on the disc table of the centrifuge through 128-channel analog and 32-channel digital signals, with sampling rate of 100 kHz for 2 hours. Our dynamic-balanced centrifuge can hold payloads of 600 kg that enable experimentation on various models of living organisms, from cells to animals and plants. We use this novel centrifuge for neurochemical and neurophysiological approaches such as microdialysis and telemetrical recording of neuronal activity in the rat brain. Financial supports from JSPS to K. Hasegawa (2011) and from JAXA to Y. Kumei (2011).

Aplicación del Aprendizaje Basado en Problemas para el estudio de Funciones Reales de Variables Reales

OpenAIRE

Varela Lezeta, María Concepción

2011-01-01

Duración (en horas): De 21 a 30 horas. Nivel educativo: Grado Se presenta una aplicación de la metodología ABP para el estudio de las funciones reales de dos o mas variables reales. A través de una serie de actividades se guía al alumnado a la comprensión del indicador de aprendizaje que quiera trabajar. Es necesario tener claros los conceptos que se trabajan (continuidad, derivabilidad) para función real de una variables real.

CALIDAD DE RED COMO VARIABLE MODULADORA DE DEPRESIÓN EN ADOLESCENTES ESTUDIANTES DE NIVEL MEDIO/ QUALITY NETWORK AS MODERATOR VARIABLE OF DEPRESSION IN TEENAGERS HIGH SCHOOL STUDENTS

Directory of Open Access Journals (Sweden)

Rocío Soria Trujano

2010-04-01

Full Text Available RESUMENEn un estudio previo (Nava & Vega, 2008 quisimos probar si alguna alteración emocional (depresión podía seratribuida a la lejanía de la red familiar, los análisis mostraron que sí era posible encontrar diferencias entre jóvenes recluidosy estudiantes universitarios. Sin embargo, los resultados del estudio anterior dejaban una duda, ¿sería posible encontrardepresión aun cuando no hay ausencia de familia de origen? Y, ¿qué variables explicarían tal fenómeno, en caso de encontrardiferencias? Por lo anterior, decidimos realizar un estudio en el cual los participantes fueran adolescentes sin ningunacarencia de familia o alteración psicológica aparente. Evaluamos diferentes variables: apoyo social, estrés, calidad de redy depresión. Los resultados mostraron que sí fue posible replicar los resultados del primer estudio, a pesar de que noexistieron alteraciones emocionales o de red graves. Las conclusiones son discutidas a la luz de los hallazgos empíricos yteóricos correspondientes.ABSTRACTIn a previous study (Nava & Vega, 2008 we wanted to prove if some emotional alterations (depression could beattributed to the remoteness of the family network, the analyses showed that it was possible to find differences betweenyoung adults to imprison and university students. Nevertheless, the results of the previous study left a doubt, would it bepossible to find depression even though there is no absence of origin of family? And what variable would explain suchphenomenon, in case of finding differences? By the previous thing, we decided to make a study where the participants wereadolescents without deficiency of family or apparent psychological alteration. We evaluated different variables, socialsupport, stress, quality of network and depression. The results showed that it was possible to talk back the results of the firststudy, although emotional alterations or of network did not exist seriously. The conclusions are discussed to the

Estimation of the friction coefficient between wheel and rail surface using traction motor behaviour

International Nuclear Information System (INIS)

Zhao, Y; Liang, B; Iwnicki, S

2012-01-01

The friction coefficient between a railway wheel and rail surface is a crucial factor in maintaining high acceleration and braking performance of railway vehicles thus monitoring this friction coefficient is important. Restricted by the difficulty in directly measuring the friction coefficient, the creep force or creepage, indirect methods using state observers are used more frequently. This paper presents an approach using a Kalman filter to estimate the creep force and creepage between the wheel and rail and then to identify the friction coefficient using the estimated creep force-creepage relationship. A mathematic model including an AC motor, wheel and roller is built to simulate the driving system. The parameters are based on a test rig at Manchester Metropolitan University. The Kalman filter is designed to estimate the friction coefficient based on the measurements of the simulation model. Series of residuals are calculated through the comparison between the estimated creep force and theoretical values of different friction coefficient. Root mean square values of the residuals are used in the friction coefficient identification.

Motor Unit Interpulse Intervals During High Force Contractions.

Science.gov (United States)

Stock, Matt S; Thompson, Brennan J

2016-01-01

We examined the means, medians, and variability for motor-unit interpulse intervals (IPIs) during voluntary, high force contractions. Eight men (mean age = 22 years) attempted to perform isometric contractions at 90% of their maximal voluntary contraction force while bipolar surface electromyographic (EMG) signals were detected from the vastus lateralis and vastus medialis muscles. Surface EMG signal decomposition was used to determine the recruitment thresholds and IPIs of motor units that demonstrated accuracy levels ≥ 96.0%. Motor units with high recruitment thresholds demonstrated longer mean IPIs, but the coefficients of variation were similar across all recruitment thresholds. Polynomial regression analyses indicated that for both muscles, the relationship between the means and standard deviations of the IPIs was linear. The majority of IPI histograms were positively skewed. Although low-threshold motor units were associated with shorter IPIs, the variability among motor units with differing recruitment thresholds was comparable.

Operation of the matrix converter as energy sources link of variable voltage; Operacion del convertidor matricial como enlace de fuentes de energia de voltaje variable

Energy Technology Data Exchange (ETDEWEB)

Lozano-Garcia, J. M; Hernandez-Figueroa, M. A; Estrada Garcia, H. J; Martinez-Patino, J [Universidad de Guanajuato, Campus Irapuato-Salamanca, Salamanca, Guanajuato (Mexico)]. E-mails: jm.lozano@ugto.mx; mahf@ugto.mx; hestrada@ugto.mx; jesusmp23@ugto.mx

2013-03-15

Renewable energy technologies, as wind turbines, have had a remarkable penetration in power systems worldwide, causing that actual power grids became dependent and vulnerable to the variability of the energy generated by this type of resource. In that sense, power converters provide a crucial function in the performance of the overall electrical system when they are used as links between this type of generators and the power system. In this paper, a matrix converter is proposed as link device, to cope with distorted and variable voltages as the ones found in wind turbines operation where generated voltages are directly dependent on wind's speed. An analysis of its main functional characteristics when it operates subject to distorted input-voltage condition, in order to synthesize a set of output voltages with constant magnitude and frequency and without harmonic distortion, is presented. Numerical simulations and experimental results from a laboratory-scale prototype are presented to validate the converter performance. [Spanish] La gran penetracion que ha tenido la generacion de energia mediante recursos renovables, como los generadores eolicos, en el mercado energetico, han ocasionado que las redes electricas sean mas dependientes y vulnerables a la variabilidad de la energia que se genera con este tipo de recursos. En ese sentido, los convertidores de potencia utilizados como enlace entre este tipo de generadores y el sistema electrico son determinantes en el comportamiento final que se tendra en el sistema electrico. En el presente trabajo se propone la utilizacion del convertidor matricial como dispositivo de enlace y se analizan sus caracteristicas operativas en casos donde se requiere la generacion de senales de voltaje sinusoidales y con valores constantes tanto en magnitud como en frecuencia a partir de senales variables, situacion que se presenta comunmente en los aerogeneradores donde el voltaje generado depende directamente de la velocidad del

Rentabilidad de la variable activo corriente o circulante

OpenAIRE

Altuve, José Germán

2014-01-01

El activo corriente, tiene su antítesis en el pasivo corriente, mientas el segundo tiene un costo de capital u oportunidad, el primero denominado activo corriente, debe responder a la variable rentabilidad. El investigador demuestra a través del siguiente contenido, que el activo corriente, genera rentabilidad y que la misma, debe guardar proporciones por encima de la obtención del costo de oportunidad del pasivo corriente. Si afirmamos que el costo de capital de la estructu...

Effect of rolling motion on the expansion and contraction loss coefficients

International Nuclear Information System (INIS)

Yan, B.H.; Gu, H.Y.

2013-01-01

Highlights: ► The expansion and contraction loss coefficients in rolling motion are analyzed. ► Effects of rolling motion on the expansion and contraction loss coefficients are different. ► The spanwise and transverse additional forces contribute slightly to the local loss. ► The oscillations of loss coefficients increase as the strengthening of rolling motion. - Abstract: The sudden expansion and sudden contraction loss coefficients in rolling motion are investigated with CFD code FLUENT. The calculation results are validated with experimental and theoretical results in steady state. The effects of rolling motion on the expansion and contraction loss coefficients are different. The effects of spanwise and transverse additional forces on the expansion and contraction loss coefficients are weak. The effect of velocity oscillation on the contraction loss coefficient is more significant than that on the expansion loss coefficient. The oscillation of local loss coefficient also becomes more and more irregular as the strengthening of rolling motion

Variables cognoscitivo-motivacionales relacionadas con el rendimiento escolar de estudiantes de bachillerato

OpenAIRE

Becerra González, Cruz Edgardo

2016-01-01

La eficiencia terminal del bachillerato mexicano es de 60% (SEP, 2012), el más bajo de todo el sistema. Una causa de deserción es que los jóvenes se rezagan en sus estudios. El rezago se mide empleando indicadores como el rendimiento escolar, y se estudia caracterizando a los estudiantes y a las variables relacionadas. Los objetivos de esta investigación fueron: 1) explicar si existían diferencias en motivación de logro, autoeficacia, estilo atribucional y rendimiento escolar de bachilleres, ...

Momentum, sensible heat and CO2 correlation coefficient variability: what can we learn from 20 years of continuous eddy covariance measurements?

Science.gov (United States)

Hurdebise, Quentin; Heinesch, Bernard; De Ligne, Anne; Vincke, Caroline; Aubinet, Marc

2017-04-01

Long-term data series of carbon dioxide and other gas exchanges between terrestrial ecosystems and atmosphere become more and more numerous. Long-term analyses of such exchanges require a good understanding of measurement conditions during the investigated period. Independently of climate drivers, measurements may indeed be influenced by measurement conditions themselves subjected to long-term variability due to vegetation growth or set-up changes. The present research refers to the Vielsalm Terrestrial Observatory (VTO) an ICOS candidate site located in a mixed forest (beech, silver fir, Douglas fir, Norway spruce) in the Belgian Ardenne. Fluxes of momentum, carbon dioxide and sensible heat have been continuously measured there by eddy covariance for more than 20 years. During this period, changes in canopy height and measurement height occurred. The correlation coefficients (for momemtum, sensible heat and CO2) and the normalized standard deviations measured for the past 20 years at the Vielsalm Terrestrial Observatory (VTO) were analysed in order to define how the fluxes, independently of climate conditions, were affected by the surrounding environment evolution, including tree growth, forest thinning and tower height change. A relationship between canopy aerodynamic distance and the momentum correlation coefficient was found which is characteristic of the roughness sublayer, and suggests that momentum transport processes were affected by z-d. In contrast, no relationship was found for sensible heat and CO2 correlation coefficients, suggesting that the z-d variability observed did not affect their turbulent transport. There were strong differences in these coefficients, however, between two wind sectors, characterized by contrasted stands (height differences, homogeneity) and different hypotheses were raised to explain it. This study highlighted the importance of taking the surrounding environment variability into account in order to ensure the spatio

Solutrean Chronology & Lithic Variability in Vasco-Cantabrian Spain

Directory of Open Access Journals (Sweden)

Lawrence Guy STRAUS

2009-10-01

Full Text Available RESUMEN: Recientes excavaciones en la zona cantábrica suministran datos que apuntan a una variabilidad en las industrias del Solutrense. Basado en pruebas de radiocarbono parece evidenciarse una contemporaneidad entre el fenómeno solutrense de la España Cantábrica y el Rhone Valley. La industria de puntas diagnostican un resultado de un proceso tecnológico convergente.ABSTRACT: Recent excavations in Cantabrian cave deposits provide evidence of Solutrean industrial variability and provocative chronological information. On the basis of radiocarbon there is strong evidence for contemporeanity between the Solutrean phenomena of Cantabrian Spain and in the Rhone Valley. The stone-points diagnostic would probably be the result of convergent technology. There is considerable evidence for variability among artifacts assemblages (shown in their respective coefficients of variation. It is therefore difficult to characterize Cantabrian collections from the time range in question in a general way. It seems more fruitful to try and demonstrate the existence of functional parameters for observed artifact variability.

Efectos a Corto Plazo en Variables Cardiorrespiratorias de 2 Programas de Entrenamiento de Fuerza Prescribiendo Intensidad de Ejercicio con la RPE

Directory of Open Access Journals (Sweden)

José Luis Maté Muñoz

2015-01-01

Full Text Available El objetivo del estudio fue calcular las variables cardiorrespiratorias comparando un programa de entrenamiento de fuerza tradicional en condiciones estables con otro programa de fuerza en condiciones inestables, prescribiendo la carga de entrenamiento a partir de la escala de percepción subjetiva del esfuerzo. Se llevó a cabo un diseño aleatorio con grupo control asignando 36 hombres sanos a dos grupos experimentales (n = 24 y a un grupo control (n = 12, realizando dos entrenamientos de fuerza en circuito (ejercicios de fuerza con pesos libres y máquinas de musculación y ejercicios en BOSU® y TRX®. Los programas de fuerza duraron 7 semanas (3 sesiones por semana, midiendo las variables cardiorrespiratorias en un test de esfuerzo incremental pre y post entrenamiento. Para los valores de umbral ventilatorio 1, los resultados indicaron una reducción significativa de la frecuencia cardíaca después del período de entrenamiento tanto en el factor Tiempo (F = 12,777; p < 0,01 como en la Interacción (F = 4,718; p = 0,016, sin encontrar significación estadística entre los tres grupos (F = 1,279; p = 0,293. También se redujo significativamente el consumo de oxígeno a primer umbral, siendo esta disminución más acentuada en el grupo tradicional (F = 5,401; p = 0,027. Por tanto, se concluye que los valores de las variables cardiorrespiratorias después de 7 semanas de entrenamiento de fuerza en diferentes condiciones (estabilidad e inestabilidad y, prescribiendo las cargas de entrenamiento a través de la RPE, son similares.

Variable Acceleration Force Calibration System (VACS)

Science.gov (United States)

Rhew, Ray D.; Parker, Peter A.; Johnson, Thomas H.; Landman, Drew

2014-01-01

Conventionally, force balances have been calibrated manually, using a complex system of free hanging precision weights, bell cranks, and/or other mechanical components. Conventional methods may provide sufficient accuracy in some instances, but are often quite complex and labor-intensive, requiring three to four man-weeks to complete each full calibration. To ensure accuracy, gravity-based loading is typically utilized. However, this often causes difficulty when applying loads in three simultaneous, orthogonal axes. A complex system of levers, cranks, and cables must be used, introducing increased sources of systematic error, and significantly increasing the time and labor intensity required to complete the calibration. One aspect of the VACS is a method wherein the mass utilized for calibration is held constant, and the acceleration is changed to thereby generate relatively large forces with relatively small test masses. Multiple forces can be applied to a force balance without changing the test mass, and dynamic forces can be applied by rotation or oscillating acceleration. If rotational motion is utilized, a mass is rigidly attached to a force balance, and the mass is exposed to a rotational field. A large force can be applied by utilizing a large rotational velocity. A centrifuge or rotating table can be used to create the rotational field, and fixtures can be utilized to position the force balance. The acceleration may also be linear. For example, a table that moves linearly and accelerates in a sinusoidal manner may also be utilized. The test mass does not have to move in a path that is parallel to the ground, and no re-leveling is therefore required. Balance deflection corrections may be applied passively by monitoring the orientation of the force balance with a three-axis accelerometer package. Deflections are measured during each test run, and adjustments with respect to the true applied load can be made during the post-processing stage. This paper will

The Influence of Flexibility Coefficient on the Size of Internal Forces and Deformations in Circular Plates on Elastic Medium

Directory of Open Access Journals (Sweden)

Şandru Mirela

2016-09-01

Full Text Available This paper presents an analytical study which deals with the behavior of the circular plates in bending theory, considering the soil-structure interaction under Winkler's hypothesis. It was intended to illustrate the variation of internal forces and deformations according to the flexibility coefficient of plates considering three models: a fixed solid circular plate subjected to a uniformly distributed load, a fixed solid circular plate acted by a displacement applied on the exterior contour and a solid plate subjected to a temperature gradient. For this study the computation relations were written as a product between a dimensional and a non-dimensional factor, the last one indicating the variation of internal forces and deformations. For each type of action there are presented results obtained using the finite element method to illustrate the differences between this method and the analytical computation.

Variables ambientales y abundancia de los huevos de Anchoa mitchilli (Pisces: Engraulidae en la laguna de Tamiahua, México

Directory of Open Access Journals (Sweden)

Carlos Díaz-Avalos

2003-06-01

Full Text Available Se estudió la abundancia de huevos de Anchoa mitchilli (Cuvier y Valenciennes 1848 en la laguna de Tamiahua, Ver. durante tres ciclos anuales (84-85, 85-86 y 86-87, para determinar zonas y épocas de alta concentración de huevos y su posible asociación con variables como temperatura, salinidad, transparencia y profundidad, así como con factores espacio-temporales como posición geográfica, época climática y el ciclo anual de recolecta. Para probar estadísticamente la asociación de la abundancia de huevos con dichos factores y variables se ajusto un Modelo Lineal Generalizado (MLG con error tipo Gamma. Los resultados del modelo ajustado sugieren que no todas las variables tienen un efecto significativo sobre la abundancia de huevos (t de Student, p >0.05. Las variables que resultaron estadísticamente significativas indican la presencia de un componente estacional y que la salinidad tiene un efecto condicional a la localidad. Las mayores abundancias promedio durante los tres ciclos de recolecta ocurrieron siempre durante el verano. Asimismo, debido a la presencia de interacciones significativas (t de Student, pEgg abundance of Anchoa mitchilli was studied in Laguna de Tamiahua, Veracruz during three annual cycles (84-85, 85-86 and 86-87. Our goal was to detect areas and seasons with high egg abundance and the possible association of such areas and seasons with covariates such as temperature, salinity, transparency, depth, location, season and year. The association was tested statistically using a Generalized Linear Model (GLM with Gamma type error. The results suggest that not all the covariates considered have a significant effect on egg abundance (Student’s T, p>0.005. The significant effects show the presence of a seasonal component and that the effect of salinity on egg abundance is conditional to location. High average egg abundances for the three annual cycles were observed during summer. The presence of significant interactions

Relaciones entre los hongos filamentosos y solubilizadores de fosfatos con algunas variables edáficas y el manejo de cafetales

Directory of Open Access Journals (Sweden)

Raúl Hernando Posada

2012-09-01

Full Text Available El suelo y sus propiedades tienen múltiples relaciones con las comunidades fúngicas. El efecto conjunto de la intensidad de manejo y las variables edáficas, incluida la estabilidad de agregados sobre las comunidades de hongos microscópicos filamentosos (HMF, solubilizadores de fosfato de hierro (HSP-Fe y solubilizadores tanto de fosfato de hierro como de calcio (HSP-(Fe+Ca no han sido evaluadas en campo. A partir de 40 muestras edáficas de ocho plantaciones de café de Colombia y México, con diferentes intensidades de manejo (IMPC y con diferencias en sus variables edáficas, se aislaron y evaluaron las comunidades de HMF, HSP-Fe y HSP-(Fe+Ca durante 2008-2009. Empleando modelos basados en ecuaciones estructurales se encontró que el carbono orgánico se relacionó positivamente con la riqueza y abundancia de HMF (λ>0.58 y fue variable en su relación con HSP-Fe y HSP-(Fe+Ca. Las relaciones del fósforo disponible, pH y las fracciones de macro-agregados fueron altamente variables. El IMPC se relacionó negativamente con HSP-Fe (λ≤-0.21 en cafetales colombianos. Se discuten las interacciones para cada conjunto de variables (químicas, estabilidad de macro-agregados y de manejo de plantación y se explican las relaciones resultantes. Las relaciones de cada variable son inseparables del contexto edáfico y geográfico, los cuales imprimen marcadas diferencias.

A 6-year study of mammographic compression force: Practitioner variability within and between screening sites

International Nuclear Information System (INIS)

Mercer, Claire E.; Szczepura, Katy; Kelly, Judith; Millington, Sara R.; Denton, Erika R.E.; Borgen, Rita; Hilton, Beverley; Hogg, Peter

2015-01-01

Background: The application of compression force in mammography is more heavily influenced by the practitioner rather than the client. This can affect client experience, radiation dose and image quality. This research investigates practitioner compression force variation over a six year screening cycle in three different screening units. Methods: Data were collected from three consecutive screening events in three breast screening sites. Recorded data included: practitioner code, applied compression force (N), breast thickness (mm), BI-RADS ® density category. Exclusion criteria included: previous breast surgery, previous/ongoing assessment and breast implants. 975 clients (2925 client visits, 11,700 mammogram images) met inclusion criteria across three sites. Data analysis assessed practitioner and site variation of compression force and breast thickness. Results: Practitioners across three breast screening sites behave differently in the application of compression force. Two of the three sites demonstrate variability within themselves though they demonstrated no significant difference in mean, first and third quartile compression force and breast thickness values CC (p > 0.5), MLO (p > 0.1) between themselves. However, in the third site, where mandate dictates a minimum compression force is applied, greater consistency was demonstrated between practitioners and clients; a significant difference in mean, first and third quartile compression force and breast thickness values (p < 0.001) was demonstrated between this site and the other two sites. Conclusion: Variability within these two sites and between the three sites could result in variations. Stabilisation of these variations may have a positive impact on image quality, radiation dose reduction, re-attendance levels and potentially cancer detection. The large variation in compression forces could negatively impact on client experience between the units and within a unit. Further research is required to

DESARROLLO DE UN SIMULADOR DE EDIFICIO CON PARÁMETROS VARIABLES

Directory of Open Access Journals (Sweden)

Andrés Enrique Rosso Mateus

2009-01-01

Full Text Available Este artículo expone la metodología de implementación de un simulador de edifi cio teniendo en cuenta factores de desarrollo como la escalabilidad del software, su ciclo de desarrollo y los detalles matemáticos usados para el modelamiento del sistema.Muestra además una metodología sencilla y efi caz para la simulación de cualquier tipo de sistema, en la cual se exponen las librerías de programación que se encontraron más útiles para este tipo de desarrollo. Este simulador representa un edifi cio real con todas las características y variables que interesan para el caso y se pretende usar para probar algoritmos de control para grupos de elevadores [10]. La arquitectura del simulador permite acoplar cualquier algoritmo de control que siga el estándar propio del simulador, se muestran como ejemplo dos algoritmos de control los cuales son ingresados en el simulador para probar su desempeño [10]. El simulador permite generar reportes estadísticos del desempeño de los controladores usados, estos reportes son útiles a la hora de comprobar la efi ciencia de estos y de comparar cuantitativamente el funcionamiento entre ellos.

Estimating Runoff Coefficients Using Weather Radars

DEFF Research Database (Denmark)

Ahm, Malte; Thorndahl, Søren Liedtke; Rasmussen, Michael R.

2012-01-01

This paper presents a method for estimating runoff coefficients of urban drainage catchments based on a combination of high resolution weather radar data and insewer flow measurements. By utilising the spatial variability of the precipitation it is possible to estimate the runoff coefficients...... of separate subcatchments. The method is demonstrated through a case study of an urban drainage catchment (678ha) located in the municipality of Aarhus, Denmark. The study has proven it is possible to use corresponding measurements of the relative rainfall distribution over the catchment and runoff...... measurements to identify the runoff coefficients at subcatchment level. The number of potential subcatchments is limited by the number of available rainfall events with a sufficient spatial variability....

Correlation Coefficients: Appropriate Use and Interpretation.

Science.gov (United States)

Schober, Patrick; Boer, Christa; Schwarte, Lothar A

2018-05-01

Correlation in the broadest sense is a measure of an association between variables. In correlated data, the change in the magnitude of 1 variable is associated with a change in the magnitude of another variable, either in the same (positive correlation) or in the opposite (negative correlation) direction. Most often, the term correlation is used in the context of a linear relationship between 2 continuous variables and expressed as Pearson product-moment correlation. The Pearson correlation coefficient is typically used for jointly normally distributed data (data that follow a bivariate normal distribution). For nonnormally distributed continuous data, for ordinal data, or for data with relevant outliers, a Spearman rank correlation can be used as a measure of a monotonic association. Both correlation coefficients are scaled such that they range from -1 to +1, where 0 indicates that there is no linear or monotonic association, and the relationship gets stronger and ultimately approaches a straight line (Pearson correlation) or a constantly increasing or decreasing curve (Spearman correlation) as the coefficient approaches an absolute value of 1. Hypothesis tests and confidence intervals can be used to address the statistical significance of the results and to estimate the strength of the relationship in the population from which the data were sampled. The aim of this tutorial is to guide researchers and clinicians in the appropriate use and interpretation of correlation coefficients.

Comparação entre testes de equilíbrio de campo e plataforma de força Comparison between field balance tests and force platform

Directory of Open Access Journals (Sweden)

Renata Alyne Czajka Sabchuk

2012-12-01

Full Text Available Vários testes de equilíbrio têm sido utilizados para identificar o controle postural e o risco de quedas em idosos. Entretanto, não se sabe quais testes refletem mais efetivamente a capacidade em manter o equilíbrio. O objetivo deste estudo foi comparar um conjunto de testes de campo de equilíbrio (TC com os testes de posturografia em plataforma de força (PF e verificar se esses testes são capazes de discriminar diferenças no equilíbrio entre jovens e idosos. Participaram do estudo 21 jovens (21,7 ± 2,0 anos e 18 idosos (69,3 ± 7,0 anos de ambos os gêneros. Os TC foram: escala de equilíbrio de Berg (BBS, escala de equilíbrio orientado pelo desempenho, (POMA, alcance funcional (AF e levantar e caminhar cronometrado (TUGT. As variáveis analisadas na PF foram: amplitude de deslocamento nas direções anteroposterior (AMP-AP e médio-lateral (AMP-ML e trajetória do centro de pressão (TRAJ-CP. Os sujeitos foram avaliados em cinco condições durante 60s cada. Uma ANOVA one-way foi aplicada para determinar diferenças nos testes de equilíbrio entre grupos (jovens x idosos. Além disso, o teste de correlação de Spearman foi aplicado para identificar a associação entre os TC e PF. Os TC foram capazes de diferenciar jovens de idosos (p Several balance tests have been used to identify postural control and the risk of falls in the elderly. However, it is not known which tests better reflect effectively the ability to maintain balance. The objective of this study was to compare a number of field tests (FT designed to determine balance with stabilometric tests using force platforms (FP to determine whether these tests are able to discriminate differences in balance between young and older adults. Twenty-one young (21.7±2.0 years and 18 older adults (69.3±7.0 years of both genders volunteered to participate in the study. The field tests were: Berg Balance Scale (BBS, Performance Oriented Mobility Assessment (POMA, Functional Reach (FR

Contester le mariage forcé : mettre en place la ligne de défense et le ...

International Development Research Centre (IDRC) Digital Library (Canada)

Le mariage forcé viole les principes de liberté personnelle et d'autonomie individuelle. Il est considéré comme une violation des droits de la personne aux termes du droit international en matière de droits de la personne. Ce projet produira des données probantes qui aideront à combattre le mariage forcé en Inde ...

Cambios diurnos de variables físicas y químicas en la zona de ritral del río Medellín, Colombia

Directory of Open Access Journals (Sweden)

Urrego Adriana P.

2000-07-01

Full Text Available Se estudiaron las variaciones nictemerales de temperatura del aire y del agua, conductividad eléctrica, pH, oxígeno disuelto y porcentaje de saturación de oxígeno en tres períodos de la época húmeda, en una estación de muestreo del tramo alto del río Medellín. Para ello se realizaron  muestreos a intervalos de tres horas, iniciando a las 12:00 horas. Se estimó la media nictemeral de la temperatura por el método del punto medio diario. La magnitud de los cambios entre horas y períodos para cada variable se describió mediante el coeficiente de variación relativa de Pearson. La pluviosidad mostró ser 24 veces más variable que la  temperatura del aire. La variación diaria de la temperatura del aire fue seis a ocho veces mayor que la anual. Entre períodos la temperatura del agua presentó diferencias altamente significativas, y entre horas la variación fue pequeña, pero significativa. La conductividad fue similar entre horas, pero diferente entre períodos. El oxígeno mostró diferencias significativas entre horas y períodos. No se detectaron diferencias significativas de pH ni entre horas ni entre períodos. La pluviosidad influenció negativamente las variaciones de la temperatura del agua y las de la conductividad. El porcentaje de saturación mostró un sistema de carácter autotrófico, condición oligotrófica y predominio de aportes alóctonos de material orgánico.We studied the nictemeral variations of air and water temperatures, electric conductivity, pH, dissolved oxygen and percentages of oxygen saturation during three periods of the wet season at one sampling point in the ritral zone of the Medellín river, Colombia. Sampling was performed every three hours beginning at 12:00 h. Mean water temperature was estimated by the mean daily point method. The magnitude of changes among sampling hours and periods for each variable was described by means of Pearson's coefficient of relative variation. Pluviosity was 24

Eficacia de la hipnosis en la modificación de variables psicológicas y fisiológicas en deportistas / Efficiency of Hypnosis in Psychological and Physiological Variables in Sportsman

Directory of Open Access Journals (Sweden)

Rubén Fernández García

2013-06-01

Full Text Available En este estudio se evaluó la eficacia de la hipnosis en la modificación de un conjunto de variables psicológicas y fisiológicas durante la realización de pruebas de esfuerzo. Se utilizaron un total de 24 participantes ciclistas. El procedimiento consistió en enviar al azar a los participantes a un grupo experimental con hipnosis o al grupo control. En ambos grupos se midieron variables psicológicas y fisiológicas relacionadas con el deporte. Los resultados no mostraron diferencias estadísticamente significativas entregrupos en las variables evaluadas. Sí se observó una tendencia en el grupo experimental a puntuar más positivamente en varias variables psicológicas analizadas. Se concluye que sería de interés desarrollar futuras investigaciones ampliando el tamaño de la muestra y aplicar el procedimiento en diferentes modalidades deportivas.

Long-term trends in geomagnetic and climatic variability

Czech Academy of Sciences Publication Activity Database

Bucha, Václav

2002-01-01

Roč. 27, 6/7 (2002), s. 427-731 ISSN 1474-7065 R&D Projects: GA AV ČR IAA3012806 Institutional research plan: CEZ:AV0Z3012916 Keywords : geomagnetic forcing * climatic variability * global warming Subject RIV: DE - Earth Magnetism, Geodesy, Geography

Comparison of environmental forcings affecting suspended sediments variability in two macrotidal, highly-turbid estuaries

Science.gov (United States)

Jalón-Rojas, Isabel; Schmidt, Sabine; Sottolichio, Aldo

2017-11-01

The relative contribution of environmental forcing frequencies on turbidity variability is, for the first time, quantified at seasonal and multiannual time scales in tidal estuarine systems. With a decade of high-frequency, multi-site turbidity monitoring, the two nearby, macrotidal and highly-turbid Gironde and Loire estuaries (west France) are excellent natural laboratories for this purpose. Singular Spectrum Analyses, combined with Lomb-Scargle periodograms and Wavelet Transforms, were applied to the continuous multiannual turbidity time series. Frequencies of the main environmental factors affecting turbidity were identified: hydrological regime (high versus low river discharges), river flow variability, tidal range, tidal cycles, and turbulence. Their relative influences show similar patterns in both estuaries and depend on the estuarine region (lower or upper estuary) and the time scale (multiannual or seasonal). On the multiannual time scale, the relative contribution of tidal frequencies (tidal cycles and range) to turbidity variability decreases up-estuary from 68% to 47%, while the influence of river flow frequencies increases from 3% to 42%. On the seasonal time scale, the relative influence of forcings frequencies remains almost constant in the lower estuary, dominated by tidal frequencies (60% and 30% for tidal cycles and tidal range, respectively); in the upper reaches, it is variable depending on hydrological regime, even if tidal frequencies are responsible for up 50% of turbidity variance. These quantifications show the potential of combined spectral analyses to compare the behavior of suspended sediment in tidal estuaries throughout the world and to evaluate long-term changes in environmental forcings, especially in a context of global change. The relevance of this approach to compare nearby and overseas systems and to support management strategies is discussed (e.g., selection of effective operation frequencies/regions, prediction of the most

Educación Física Emocional en Adolescentes. Identificación de Variables Predictivas de la Vivencia

Directory of Open Access Journals (Sweden)

Conxita Duran

2015-01-01

Full Text Available Los juegos deportivos son recursos pedagógicos de primer orden cuando se trata de educar competencias emocionales orientadas a la mejora del bienestar socioemocional del alumnado. Esta investigación examinó la capacidad predictiva de seis variables dominio acción motriz (familia de juegos, competición (presencia o ausencia, género (masculino y femenino, tipo de emoción (trece emociones organizadas en positivas, negativas y ambiguas e historial deportivo (con o sin historial para explicar la intensidad emocional suscitada en la práctica de juegos deportivos. Participaron 220 estudiantes de ESO y Bachillerato de 5 centros educativos de las regiones de Cataluña y Valencia. Se realizaron 2 sesiones con juegos con o sin competición de los cuatro dominios de acción motriz. Tras finalizar cada juego los alumnos respondieron la escala validada Games and emotions Scale (GES para identificar la intensidad de trece emociones básicas. El análisis de los datos se realizó mediante la técnica estadística de árboles de clasificación. Entre los hallazgos obtenidos destacamos: los juegos deportivos generan intensidades elevadas de emociones positivas. El tipo de juego (dominio y la competición son las principales variables predictivas de la alegría, el humor y la felicidad. Las emociones negativas registraron los valores menos intensos. La competición (derrota y el historial deportivo (disponer de antecedentes deportivos fueron las principales variables predictivas de la ira y la ansiedad. El género (chicos y el historial deportivo (con historial fueron las principales variables predictivas del rechazo. Este estudio aporta criterios sobre la utilización del juego deportivo en programas de educación física emocional en adolescentes.

Force Field Benchmark of the TraPPE_UA for Polar Liquids: Density, Heat of Vaporization, Dielectric Constant, Surface Tension, Volumetric Expansion Coefficient, and Isothermal Compressibility.

Science.gov (United States)

Núñez-Rojas, Edgar; Aguilar-Pineda, Jorge Alberto; Pérez de la Luz, Alexander; de Jesús González, Edith Nadir; Alejandre, José

2018-02-08

The transferable potential for a phase equilibria force field in its united-atom version, TraPPE_UA, is evaluated for 41 polar liquids that include alcohols, thiols, ethers, sulfides, aldehydes, ketones, and esters to determine its ability to reproduce experimental properties that were not included in the parametrization procedure. The intermolecular force field parameters for pure components were fit to reproduce experimental boiling temperature, vapor-liquid coexisting densities, and critical point (temperature, density, and pressure) using Monte Carlo simulations in different ensembles. The properties calculated in this work are liquid density, heat of vaporization, dielectric constant, surface tension, volumetric expansion coefficient, and isothermal compressibility. Molecular dynamics simulations were performed in the gas and liquid phases, and also at the liquid-vapor interface. We found that relative error between calculated and experimental data is 1.2% for density, 6% for heat of vaporization, and 6.2% for surface tension, in good agreement with the experimental data. The dielectric constant is systematically underestimated, and the relative error is 37%. Evaluating the performance of the force field to reproduce the volumetric expansion coefficient and isothermal compressibility requires more experimental data.

Influence of forced respiration on nonlinear dynamics in heart rate variability

DEFF Research Database (Denmark)

Kanters, J K; Højgaard, M V; Agner, E

1997-01-01

Although it is doubtful whether the normal sinus rhythm can be described as low-dimensional chaos, there is evidence for inherent nonlinear dynamics and determinism in time series of consecutive R-R intervals. However, the physiological origin for these nonlinearities is unknown. The aim...... with a metronome set to 12 min(-1). Nonlinear dynamics were measured as the correlation dimension and the nonlinear prediction error. Complexity expressed as correlation dimension was unchanged from normal respiration, 9.1 +/- 0.5, compared with forced respiration, 9.3 +/- 0.6. Also, nonlinear determinism...... expressed as the nonlinear prediction error did not differ between spontaneous respiration, 32.3 +/- 3.4 ms, and forced respiration, 31.9 +/- 5.7. It is concluded that the origin of the nonlinear dynamics in heart rate variability is not a nonlinear input from the respiration into the cardiovascular...

Genetic variability, correlation and path coefficients of yield and its components analysis in pumpkin (Cucurbita moschata Duch Ex Poir

Directory of Open Access Journals (Sweden)

GM Mohsin

2017-06-01

Full Text Available Genetic variability, correlation and path coefficient were studied for yield and yield component traits in twenty one diverse genotypes of pumpkin. Highest genotypic coefficient of variation was recorded for fruit length (cm, single fruit weight (kg, Brix (% and yield per plant (kg. Heritability estimates in broad sense were higher for almost all the characters. The characters namely, fruit length, single fruit weight, yield per plant and brix% had high genotypic coefficient of variation coupled with heritability gave high genetic advance expressed as percentage of mean ranged from 76.84 to 96.06 which indicated that these characters were less influenced by environment confirming additive gene action, and therefore, selection of these characters would be more effective for yield improvement of pumpkins. Total six traits likely fruit length, fruit diameter, flesh thickness, single fruit weight and number of fruits per plant were positively and significantly associated with yield per plant. Path coefficient analysis also revealed maximum contribution of single fruit weight (0.869 to yield and this was followed by the contribution of number of fruit per plant (0.527 at genotypic level.

Micro- and macroscale coefficients of friction of cementitious materials

International Nuclear Information System (INIS)

Lomboy, Gilson; Sundararajan, Sriram; Wang, Kejin

2013-01-01

Millions of metric tons of cementitious materials are produced, transported and used in construction each year. The ease or difficulty of handling cementitious materials is greatly influenced by the material friction properties. In the present study, the coefficients of friction of cementitious materials were measured at the microscale and macroscale. The materials tested were commercially-available Portland cement, Class C fly ash, and ground granulated blast furnace slag. At the microscale, the coefficient of friction was determined from the interaction forces between cementitious particles using an Atomic Force Microscope. At the macroscale, the coefficient of friction was determined from stresses on bulk cementitious materials under direct shear. The study indicated that the microscale coefficient of friction ranged from 0.020 to 0.059, and the macroscale coefficient of friction ranged from 0.56 to 0.75. The fly ash studied had the highest microscale coefficient of friction and the lowest macroscale coefficient of friction. -- Highlights: •Microscale (interparticle) coefficient of friction (COF) was determined with AFM. •Macroscale (bulk) COF was measured under direct shear. •Fly ash had the highest microscale COF and the lowest macroscale COF. •Portland cement against GGBFS had the lowest microscale COF. •Portland cement against Portland cement had the highest macroscale COF

Neutral forces acting on intragenomic variability shape the Escherichia coli regulatory network topology.

Science.gov (United States)

Ruths, Troy; Nakhleh, Luay

2013-05-07

Cis-regulatory networks (CRNs) play a central role in cellular decision making. Like every other biological system, CRNs undergo evolution, which shapes their properties by a combination of adaptive and nonadaptive evolutionary forces. Teasing apart these forces is an important step toward functional analyses of the different components of CRNs, designing regulatory perturbation experiments, and constructing synthetic networks. Although tests of neutrality and selection based on molecular sequence data exist, no such tests are currently available based on CRNs. In this work, we present a unique genotype model of CRNs that is grounded in a genomic context and demonstrate its use in identifying portions of the CRN with properties explainable by neutral evolutionary forces at the system, subsystem, and operon levels. We leverage our model against experimentally derived data from Escherichia coli. The results of this analysis show statistically significant and substantial neutral trends in properties previously identified as adaptive in origin--degree distribution, clustering coefficient, and motifs--within the E. coli CRN. Our model captures the tightly coupled genome-interactome of an organism and enables analyses of how evolutionary events acting at the genome level, such as mutation, and at the population level, such as genetic drift, give rise to neutral patterns that we can quantify in CRNs.

Forces on stationary particles in near-bed turbulent flows

Science.gov (United States)

Schmeeckle, Mark W.; Nelson, Jonathan M.; Shreve, Ronald L.

2007-06-01

In natural flows, bed sediment particles are entrained and moved by the fluctuating forces, such as lift and drag, exerted by the overlying flow on the particles. To develop a better understanding of these forces and the relation of the forces to the local flow, the downstream and vertical components of force on near-bed fixed particles and of fluid velocity above or in front of them were measured synchronously at turbulence-resolving frequencies (200 or 500 Hz) in a laboratory flume. Measurements were made for a spherical test particle fixed at various heights above a smooth bed, above a smooth bed downstream of a downstream-facing step, and in a gravel bed of similarly sized particles as well as for a cubical test particle and 7 natural particles above a smooth bed. Horizontal force was well correlated with downstream velocity and not correlated with vertical velocity or vertical momentum flux. The standard drag formula worked well to predict the horizontal force, but the required value of the drag coefficient was significantly higher than generally used to model bed load motion. For the spheres, cubes, and natural particles, average drag coefficients were found to be 0.76, 1.36, and 0.91, respectively. For comparison, the drag coefficient for a sphere settling in still water at similar particle Reynolds numbers is only about 0.4. The variability of the horizontal force relative to its mean was strongly increased by the presence of the step and the gravel bed. Peak deviations were about 30% of the mean force for the sphere over the smooth bed, about twice the mean with the step, and 4 times it for the sphere protruding roughly half its diameter above the gravel bed. Vertical force correlated poorly with downstream velocity, vertical velocity, and vertical momentum flux whether measured over or ahead of the test particle. Typical formulas for shear-induced lift based on Bernoulli's principle poorly predict the vertical forces on near-bed particles. The

Nota sobre el cambio de variable en las integrales definidas

OpenAIRE

Soriano, Luis Ignacio

2012-01-01

En los textos más frecuentemente empleados por nuestras alumnos de las Facultades técnicas no se hacen indicaciones de ninguna clase sobre las precauciones que es necesaria tomar en el caso de cambio de variable en las integrales definidas; El siguiente ejemplo hará ver la necesidad de ser cuidadosos

Desarrollo de productos turísticos rurales sustentables. Propuesta y validación de expertos respecto a tres variables.

Directory of Open Access Journals (Sweden)

Luis Fernando Figueroa González

2015-01-01

Full Text Available El turismo rural sustentable representa una alternativa para el desarrollo económico, social y ecológico de las comunidades rurales, para lo cual es necesario desarrollar productos y servicios turísticos apropiados. El objetivo de esta investigación consistió en identificar desde la validación de expertos, variables clave para el desarrollo de productos turísticos rurales sustentables. Se desarrolló una investigación exploratoria y descriptiva dividida en tres fases. La primera de ellas se apoyó en la identificación de variables a partir de la revisión de literatura identificándose tres categorías: motivación para viajes a destinos turísticos rurales, recursos e imagen del destino rural sustentable. En la segunda fase de la investigación ocho expertos agregaron nuevas variables, integrándose éstas a las obtenidas en la etapa previa. Finalmente, en la tercera fase se aplicó el método Fuzzy Delphi evaluándose y validándose las variables obtenidas a través de seis expertos. Los resultados validaron la mayor parte de las variables identificadas teórica y empíricamente, considerándose en primer lugar en motivación el contacto con la naturaleza, en la categoría de recursos predominaron los naturales y en imagen rural, la necesidad de comunicar la relevancia de la comunidad y sus recursos.

Influence of the biomechanical variables of the gait cycle in running economy. [Influencia de variables biomecánicas del ciclo de paso en la economía de carrera].

Directory of Open Access Journals (Sweden)

Jordan Santos-Concejero

2014-04-01

Full Text Available The aim of this study was to investigate the relationships between biomechanical variables and running economy (RE. Eleven recreational (RR and 14 well-trained runners (WT completed 4 min stages on a treadmill at different speeds. During the test, biomechanical variables such as ground contact time (tc, swing time (tsw, stride length, frequency and angle and the length of the different subphases of ground contact were calculated using an optical measurement system. VO2 was measured in order to calculate RE. The WT runners were more economical than the RR at all speeds and presented lower tc, higher tsw, longer strides, lower stride frequencies and higher stride angles (P Resumen El objetivo de este estudio fue el investigar las relaciones entre diferentes variables biomecánicas y la economía de carrera (RE. Once atletas populares (RR y 14 atletas altamente entrenados (WT completaron estadios de 4 min en tapiz rodante a diferentes velocidades. Durante el test, el tiempo de contacto (tc y de vuelo (tsw, la longitud, frecuencia y ángulo de zancada y la duración de las diferentes sub-fases del tiempo de contacto se calcularon usando un sistema óptico. Se midió el VO2 para calcular la RE. Los atletas WT fueron más económicos que los RR y presentaron menores tc, mayores tsw, zancadas más largas, frecuencias más bajas y ángulos mayores (P

Crossflow force transducer

International Nuclear Information System (INIS)

Mulcahy, T.M.

1982-05-01

A force transducer for measuring lift and drag coefficients for a circular cylinder in turbulent water flow is presented. In addition to describing the actual design and construction of the strain-gauged force- ring based transducer, requirements for obtained valid fluid force test data are discussed, and pertinent flow test experience is related

Painleve Analysis and Darboux Transformation for a Variable-Coefficient Boussinesq System in Fluid Dynamics with Symbolic Computation

International Nuclear Information System (INIS)

Li Hongzhe; Tian Bo; Li Lili; Zhang Haiqiang

2010-01-01

The new soliton solutions for the variable-coefficient Boussinesq system, whose applications are seen in fluid dynamics, are studied in this paper with symbolic computation. First, the Painleve analysis is used to investigate its integrability properties. For the identified case we give, the Lax pair of the system is found, and then the Darboux transformation is constructed. At last, some new soliton solutions are presented via the Darboux method. Those solutions might be of some value in fluid dynamics. (general)

Sliding mode-based lateral vehicle dynamics control using tyre force measurements

Science.gov (United States)

Kunnappillil Madhusudhanan, Anil; Corno, Matteo; Holweg, Edward

2015-11-01

In this work, a lateral vehicle dynamics control based on tyre force measurements is proposed. Most of the lateral vehicle dynamics control schemes are based on yaw rate whereas tyre forces are the most important variables in vehicle dynamics as tyres are the only contact points between the vehicle and road. In the proposed method, active front steering is employed to uniformly distribute the required lateral force among the front left and right tyres. The force distribution is quantified through the tyre utilisation coefficients. In order to address the nonlinearities and uncertainties of the vehicle model, a gain scheduling sliding-mode control technique is used. In addition to stabilising the lateral dynamics, the proposed controller is able to maintain maximum lateral acceleration. The proposed method is tested and validated on a multi-body vehicle simulator.

Estimating crop coefficients for corn during an evapotranspiration experiment on an oxisol in Brazil Determinação de coeficientes de cultura para o milho durante um experimento de evapotranspiração em um oxisol do Brasil

Directory of Open Access Journals (Sweden)

M.M. Villagra

1994-08-01

Full Text Available Soil water balance components were measured during two periods (from 1989 to 1991 on a Dark Red Latosol (oxisol in Piracicaba,SP, Brazil. The change in soil water storage and the soil water fluxes at the lower limit of the rooting zone were calculated for a transect of 25 observation plots. Hydraulic head gradients were determined by tensiometer measurements. Soil water flux densities were estimated through Darcy's equation. The actual evapotranspiration of the crops and weeds and the actual evaporation of bare soil were obtained from the water balance equation and this for two periods under different crop rotations. For the first period the sequence was bare soil-corn-weeds and for the second period it was stubble mulch-weeds-corn. For assessing the crop coefficients the potential evapotranspiration was calculated according to two different methods. The first method was based on the modified Penman equation with grass as a reference crop, to obtain this way reference coefficients, and the second method was based on the pan "A" evaporation data in order to obtain pan coefficients. These coefficients were compared with the tabulated crop coefficients. In general when there was no shortage of water during the corn growth, the crop coefficients k c"A" and k c ref were very close to the k c values.Os componentes do balanço hídrico foram medidos durante dois períodos (de 1989 a 1991 em terra roxa estruturada, em Piracicaba,SP, Brasil. As variações de armazenamento de água e os fluxos de água no solo no limite inferior da zona radicular foram calculados para uma transeção de 25 parcelas experimentais. Gradientes hidráulicos foram determinados por meio de medidas tensiométricas. Densidades de fluxo de água foram estimadas através da equação de Darcy. A evapotranspiração atual das culturas e das ervas daninhas e a evaporação atual do solo nú foram obtidas da equação do balanço hídrico, para dois períodos, sob diferentes rota

Procesos de conversión de acero y efecto de variables en convertidores tipo L.B.E.

Directory of Open Access Journals (Sweden)

Blanco, C.

1995-10-01

Full Text Available In order to determine control equations based on qualitative and quantitative changes of the raw materials, an analysis of the efficiency of the steel production process was carried out in converters under specified operation conditions. Empirical equations to obtain the final composition of the steel as a function of the additives, the initial concentrations of the hot metal and the blowing oxygen patterns are established. The resulting relationships depend on the considered variables and therefore could be used to determine operational strategies in order to obtain steels of a certain quality.

Se analiza la eficacia de los procesos de transformación en convertidores en condiciones de trabajo determinadas, para deducir relaciones aplicables al control basadas en la modificación de cantidades y composiciones de las materias primas. Se plantean ecuaciones empíricas para determinar la composición final del acero como función de los aditivos y de las concentraciones iniciales del arrabio tratado, así como el patrón de soplado de oxígeno. Las relaciones obtenidas establecen las dependencias entre cada una de las variables consideradas y, por tanto, permiten determinar estrategias de operación para obtener aceros con unas calidades finales dadas.

Form coefficient of helical toroidal solenoids

International Nuclear Information System (INIS)

Amelin, V.Z.; Kunchenko, V.B.

1982-01-01

For toroidal solenoids with continuous spiral coil, winded according to the laws of equiinclined and simple cylindrical spirals with homogeneous, linearly increasing to the coil periphery and ''Bitter'' distribution of current density, the analytical expressions for the dependence between capacity consumed and generated magnetic field, expressions for coefficients of form similar to Fabry coefficient for cylindrical solenoids are obtained and dependence of the form coefficient and relative volume of solenoid conductor on the number of revolutions of screw line per one circumvention over the large torus radius is also investigated. Analytical expressions of form coefficients and graphical material permit to select the optimum geometry as to capacity consumed both for spiral (including ''force-free'') and conventional toroidal solenoids of magnetic systems in thermonulear installations

Determination of correction coefficients for quantitative analysis by mass spectrometry. Application to uranium impurities analysis; Recherche des coefficients de correction permettant l'analyse quantitative par spectrometrie de masse. Application a l'analyse d'impuretes dans l'uranium