WorldWideScience

Sample records for variable retention harvesting

  1. Effects of variable retention harvesting on natural tree regeneration in Pinus resinosa (red pine) forests

    Science.gov (United States)

    Margaret W. Roberts; Anthony W. D' Amato; Christel C. Kern; Brian J. Palik

    2017-01-01

    Concerns over loss of ecosystem function and biodiversity in managed forests have led to the development of silvicultural approaches that meet ecological goals as well as sustain timber production. Variable Retention Harvest (VRH) practices, which maintain mature overstory trees across harvested areas, have been suggested as an approach to balance these objectives;...

  2. The physiological basis for regeneration response to variable retention harvest treatments in three pine species

    Science.gov (United States)

    Matthew D. Powers; Kurt S. Pregitzer; Brian J. Palik; Christopher R. Webster

    2011-01-01

    Variable retention harvesting (VRH) is promoted for enhancing biodiversity and ecosystem processes in managed forests, but regeneration responses to the complex stand structures that result from VRH are poorly understood. We analyzed foliar stable carbon isotope ratios (δ13C), oxygen isotope ratios (δ18O...

  3. Regeneration in bottomland forest canopy gaps 6 years after variable retention harvests to enhance wildlife habitat

    Science.gov (United States)

    Daniel J. Twedt; Scott G. Somershoe

    2013-01-01

    To promote desired forest conditions that enhance wildlife habitat in bottomland forests, managers prescribed and implemented variable-retention harvest, a.k.a. wildlife forestry, in four stands on Tensas River National Wildlife Refuge, LA. These treatments created canopy openings (gaps) within which managers sought to regenerate shade-intolerant trees. Six years after...

  4. Regeneration in bottomland forest canopy gaps six years after variable retention harvests to enhance wildlife habitat

    Science.gov (United States)

    Twedt, Daniel J.; Somershoe, Scott G.; Guldin, James M.

    2013-01-01

    To promote desired forest conditions that enhance wildlife habitat in bottomland forests, managers prescribed and implemented variable-retention harvest, a.k.a. wildlife forestry, in four stands on Tensas River National Wildlife Refuge, LA. These treatments created canopy openings (gaps) within which managers sought to regenerate shade-intolerant trees. Six years after prescribed harvests, we assessed regeneration in 41 canopy gaps and 4 large (>0.5-ha) patch cut openings that resulted from treatments and in 21 natural canopy gaps on 2 unharvested control stands. Mean gap area of anthropogenic gaps (582 m²) was greater than that of natural gaps (262 m²). Sweetgum (Liquidambar styraciflua) and red oaks (Quercus nigra, Q. nuttallii, and Q. phellos) were common in anthropogenic gaps, whereas elms (Ulmus spp.) and sugarberry (Celtis laevigata) were numerous in natural gaps. We recommend harvest prescriptions include gaps with diameter >25 m, because the proportion of shade-intolerant regeneration increased with gap area up to 500 m². The proportion of shade-intolerant definitive gap fillers (individuals likely to occupy the canopy) increased with gap area: 35 percent in natural gaps, 54 percent in anthropogenic gaps, and 84 percent in patch cuts. Sweetgum, green ash (Fraxinus pennsylvanica), and red oaks were common definitive gap fillers.

  5. Long-term impacts of variable retention harvesting on ground-layer plant communities in Pinus resinosa forests

    Science.gov (United States)

    Margaret W. Roberts; Anthony W. D' Amato; Christel C. Kern; Brian J. Palik; Lorenzo Marini

    2016-01-01

    Concerns about loss of biodiversity and structural complexity in managed forests have recently increased and led to the development of new management strategies focused on restoring or maintaining ecosystem functions while also providing wood outputs. Variable retention harvest (VRH) systems, in which mature overstorey trees are retained in various spatial arrangements...

  6. Limited Effects of Variable-Retention Harvesting on Fungal Communities Decomposing Fine Roots in Coastal Temperate Rainforests.

    Science.gov (United States)

    Philpott, Timothy J; Barker, Jason S; Prescott, Cindy E; Grayston, Sue J

    2018-02-01

    Fine root litter is the principal source of carbon stored in forest soils and a dominant source of carbon for fungal decomposers. Differences in decomposer capacity between fungal species may be important determinants of fine-root decomposition rates. Variable-retention harvesting (VRH) provides refuge for ectomycorrhizal fungi, but its influence on fine-root decomposers is unknown, as are the effects of functional shifts in these fungal communities on carbon cycling. We compared fungal communities decomposing fine roots (in litter bags) under VRH, clear-cut, and uncut stands at two sites (6 and 13 years postharvest) and two decay stages (43 days and 1 year after burial) in Douglas fir forests in coastal British Columbia, Canada. Fungal species and guilds were identified from decomposed fine roots using high-throughput sequencing. Variable retention had short-term effects on β-diversity; harvest treatment modified the fungal community composition at the 6-year-postharvest site, but not at the 13-year-postharvest site. Ericoid and ectomycorrhizal guilds were not more abundant under VRH, but stand age significantly structured species composition. Guild composition varied by decay stage, with ruderal species later replaced by saprotrophs and ectomycorrhizae. Ectomycorrhizal abundance on decomposing fine roots may partially explain why fine roots typically decompose more slowly than surface litter. Our results indicate that stand age structures fine-root decomposers but that decay stage is more important in structuring the fungal community than shifts caused by harvesting. The rapid postharvest recovery of fungal communities decomposing fine roots suggests resiliency within this community, at least in these young regenerating stands in coastal British Columbia. IMPORTANCE Globally, fine roots are a dominant source of carbon in forest soils, yet the fungi that decompose this material and that drive the sequestration or respiration of this carbon remain largely

  7. Modeling Coast Redwood Variable Retention Management Regimes

    Science.gov (United States)

    John-Pascal Berrill; Kevin O' Hara

    2007-01-01

    Variable retention is a flexible silvicultural system that provides forest managers with an alternative to clearcutting. While much of the standing volume is removed in one harvesting operation, residual stems are retained to provide structural complexity and wildlife habitat functions, or to accrue volume before removal during subsequent stand entries. The residual...

  8. In-stand scenic beauty of variable retention harvests and mature forests in the U.S. Pacific Northwest: the effects of basal area, density, retention pattern and down wood

    Science.gov (United States)

    R.G. Ribe

    2009-01-01

    Tensions between amenity- and timber-based economies in the U.S. and Canadian Pacific Northwest motivated a study of scenic beauty inside mature forests and timber harvests. A diverse sample of regional forests, measures of forest structure, and large, representative samples of photographs and public judges were employed to measure scenic beauty inside unharvested...

  9. Harvesting Atlantic Cod under Climate Variability

    Science.gov (United States)

    Oremus, K. L.

    2016-12-01

    Previous literature links the growth of a fishery to climate variability. This study uses an age-structured bioeconomic model to compare optimal harvest in the Gulf of Maine Atlantic cod fishery under a variable climate versus a static climate. The optimal harvest path depends on the relationship between fishery growth and the interest rate, with higher interest rates dictating greater harvests now at the cost of long-term stock sustainability. Given the time horizon of a single generation of fishermen under assumptions of a static climate, the model finds that the economically optimal management strategy is to harvest the entire stock in the short term and allow the fishery to collapse. However, if the biological growth of the fishery is assumed to vary with climate conditions, such as the North Atlantic Oscillation, there will always be pulses of high growth in the stock. During some of these high-growth years, the growth of the stock and its economic yield can exceed the growth rate of the economy even under high interest rates. This implies that it is not economically optimal to exhaust the New England cod fishery if NAO is included in the biological growth function. This finding may have theoretical implications for the management of other renewable yet exhaustible resources whose growth rates are subject to climate variability.

  10. Characterization of a variable reluctance harvester

    International Nuclear Information System (INIS)

    Kroener, M; Moll, N; Ravindran, S K T; Mehne, P; Woias, P

    2014-01-01

    In our last year's PowerMEMS contribution we presented a proof-of-concept of a variable reluctance harvester for the application in a railroad surveillance system. It was shown that intermittently closing a magnetic circuit could supply power output in the range of mW's. The test setup used showed unwanted energy pickup from the electro motor used. In this paper we present thorough measurements of the reluctance circuit with a compressed air motor to exclude the effects of the above mentioned magnetic stray fields. The effects of eddy currents and moment of inertia on the output power, the optimal coil position on the stators, and effects of different magnetic field strengths are studied. The gap width is set to a fixed value of 14 mm, representing a realistic scenario

  11. Using an inverse modelling approach to evaluate the water retention in a simple water harvesting technique

    Directory of Open Access Journals (Sweden)

    K. Verbist

    2009-10-01

    Full Text Available In arid and semi-arid zones, runoff harvesting techniques are often applied to increase the water retention and infiltration on steep slopes. Additionally, they act as an erosion control measure to reduce land degradation hazards. Nevertheless, few efforts were observed to quantify the water harvesting processes of these techniques and to evaluate their efficiency. In this study, a combination of detailed field measurements and modelling with the HYDRUS-2D software package was used to visualize the effect of an infiltration trench on the soil water content of a bare slope in northern Chile. Rainfall simulations were combined with high spatial and temporal resolution water content monitoring in order to construct a useful dataset for inverse modelling purposes. Initial estimates of model parameters were provided by detailed infiltration and soil water retention measurements. Four different measurement techniques were used to determine the saturated hydraulic conductivity (Ksat independently. The tension infiltrometer measurements proved a good estimator of the Ksat value and a proxy for those measured under simulated rainfall, whereas the pressure and constant head well infiltrometer measurements showed larger variability. Six different parameter optimization functions were tested as a combination of soil-water content, water retention and cumulative infiltration data. Infiltration data alone proved insufficient to obtain high model accuracy, due to large scatter on the data set, and water content data were needed to obtain optimized effective parameter sets with small confidence intervals. Correlation between the observed soil water content and the simulated values was as high as R2=0.93 for ten selected observation points used in the model calibration phase, with overall correlation for the 22 observation points equal to 0.85. The model results indicate that the infiltration trench has a

  12. Initial soil respiration response to biomass harvesting and green-tree retention in aspen-dominated forests of the Great Lakes region

    Science.gov (United States)

    Kurth, Valerie J.; Bradford, John B.; Slesak, Robert A.; D'Amato, Anthony W.

    2014-01-01

    Contemporary forest management practices are increasingly designed to optimize novel objectives, such as maximizing biomass feedstocks and/or maintaining ecological legacies, but many uncertainties exist regarding how these practices influence forest carbon (C) cycling. We examined the responses of soil respiration (Rs) to biomass harvesting and green-tree retention in an effort to empirically assess their impacts on C cycling. We measured Rs and soil microclimatic variables over four growing seasons following implementation of these management practices using a fully replicated, operational-scale experiment in aspen-dominated forests in northern Minnesota. Treatments included three levels of biomass removal within harvested areas: whole-tree harvest (no slash deliberately retained), 20% slash retained, and stem-only harvest (all slash retained), and two levels of green-tree retention: 0.1 ha aggregate or none. The relative amount of biomass removed had a negligible effect on Rs in harvested areas, but treatment effects were probably obscured by heterogeneous slash configurations and rapid post-harvest regeneration of aspen in all of the treatments. Discrete measurements of Rs and soil temperature within green-tree aggregates were not discernible from surrounding harvested areas or unharvested control stands until the fourth year following harvest, when Rs was higher in unharvested controls than in aggregates and harvested stands. Growing season estimates of Rs showed that unharvested control stands had higher Rs than both harvested stands and aggregates in the first and third years following harvest. Our results suggest that retention of larger forest aggregates may be necessary to maintain ecosystem-level responses similar to those in unharvested stands. Moreover, they highlight the innate complexity of operational-scale research and suggest that the initial impacts of biomass harvest on Rs may be indiscernible from traditional harvest in systems where incidental

  13. Rainwater harvesting and green area retention potential detection using commercial unmanned aerial vehicles

    Science.gov (United States)

    Kamnik, Rok; Grajfoner, Blanka; Butyrin, Andrey; Nekrep Perc, Matjaz

    2017-10-01

    The objective of this work is to use simple photogrammetry to evaluate rainwater harvesting and green area retention potential in Maribor, Slovenia city centre. Several sources of remote sensing data have been described and a field test with semi-professional drone was performed by means of computer evaluation of rainwater harvesting and green area retention potential. Some of the most important design parameters for rainwater harvesting systems as roof area and slope and available green areas were identified and evaluated. The results have shown that even semi-professional low budget drones can be successfully used for mapping areas of interest. The results of six-minute flight over twelve hectares of Maribor city centre were comparable with professional results of plane remote sensing. Image segmentation from orthomosaic together with elevation model has been used to detect roofs and green areas.

  14. Early regeneration response to aggregated overstory and harvest residue retention in Populus tremuloides (Michx.)-dominated forests

    Science.gov (United States)

    Miranda T. Curzon; Anthony W. D' Amato; Brian J. Palik

    2017-01-01

    Recent emphasis on increasing structural complexity and species diversity reflective of natural ecosystems through the use of retention harvesting approaches is coinciding with increased demand for forest-derived bioenergy feedstocks, largely sourced through the removal of harvest residues associated with whole-tree harvest. Uncertainties about the consequences of such...

  15. Retention of seed trees fails to lifeboat ectomycorrhizal fungal diversity in harvested Scots pine forests.

    Science.gov (United States)

    Varenius, Kerstin; Lindahl, Björn D; Dahlberg, Anders

    2017-09-01

    Fennoscandian forestry has in the past decades changed from natural regeneration of forests towards replantation of clear-cuts, which negatively impacts ectomycorrhizal fungal (EMF) diversity. Retention of trees during harvesting enables EMF survival, and we therefore expected EMF communities to be more similar to those in old natural stands after forest regeneration using seed trees compared to full clear-cutting and replanting. We sequenced fungal internal transcribed spacer 2 (ITS2) amplicons to assess EMF communities in 10- to 60-year-old Scots pine stands regenerated either using seed trees or through replanting of clear-cuts with old natural stands as reference. We also investigated local EMF communities around retained old trees. We found that retention of seed trees failed to mitigate the impact of harvesting on EMF community composition and diversity. With increasing stand age, EMF communities became increasingly similar to those in old natural stands and permanently retained trees maintained EMF locally. From our observations, we conclude that EMF communities, at least common species, post-harvest are more influenced by environmental filtering, resulting from environmental changes induced by harvest, than by the continuity of trees. These results suggest that retention of intact forest patches is a more efficient way to conserve EMF diversity than retaining dispersed single trees. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. Initial response to understory plant diversity and overstory tree diameter growth to a green tree retention harvest

    Science.gov (United States)

    Malcolm North; Jiquan Chen; Gordon Smith; Lucy Krakowlak; Jerry Franklin

    1996-01-01

    The increasing use of harvest techniques other than clearcutting in forests west of the Cascade mountains has created an urgent need to understand the effects of these practices on ecosystem species composition and structure. One common alternative, "green tree retention" (GTR), leaves some live trees on a harvest site to more closely mimic a moderate-...

  17. Logging damage to residual trees following commercial harvesting to different overstory retention levels in a mature hardwood stand in Tennessee

    Science.gov (United States)

    Wayne K. Clatterbuck

    2006-01-01

    Partial cutting in mature hardwood stands often causes physical damage to residual stems through felling and skidding resulting in a decline in bole quality and subsequent loss of tree value. This study assessed the logging damage to residual trees following commercial harvesting in a fully stocked, mature oak-hickory stand cut to three overstory basal area retention...

  18. Timber harvesting with variable prices, costs and interest rates

    International Nuclear Information System (INIS)

    Penttinen, M.

    2000-01-01

    This papers solves the optimal harvesting time problem of a non- industrial private forest (NIPF) owner who typically has a forest management plan and merchantable forest stands. The optimal harvesting time is defined in a volatile market situation. The infinite period problem is also formulated to allow for variable stumpage prices and reforestation costs in a two-period framework, the first of which covers the near future with dynamic price and cost functions and the second the rest of the infinite future with trend price and cost functions. The existence and uniqueness of an optimal policy is demonstrated on the basis of the explicit quasi- concavity of the objective functions. First, the solutions are constructed with prices and costs dependent on stand age only. Both cases in which the same prices and costs hold for all periods and cases in which there are dynamic prices and costs in the first period and trend ones in subsequent periods are considered. Second, the age-dependent functions are multiplied separately by the calendar time dependent exponential terms. Solutions are provided both in the case with the same age-dependent functions and the case with dynamic functions for the first period and trend functions for the subsequent periods. The sensitivity and comparative static analyses are studied with respect to the interest rate, price and cost changes, both analytically and numerically. Optimal rotation solutions are presented with alternative competing volume growth functions. Final results are provided by a gross income growth function. Competing optimisation models are discussed, and alternative volume growth models and a value growth model are compared. The key notion of the research is the sensitivity and comparative static analysis of the optimal rotation solutions with respect to roundwood prices, reforestation costs and interest rates. Different local market parameter and alternative growth data estimates are applied in testing the impact of

  19. Impacts of post-harvest slash and live-tree retention on biomass and nutrient stocks in Populus tremuloides Michx.-dominated forests, northern Minnesota, USA

    Science.gov (United States)

    Klockow, Paul A.; D'Amato, Anthony W.; Bradford, John B.

    2013-01-01

    Globally, there is widespread interest in using forest-derived biomass as a source of bioenergy. While conventional timber harvesting generally removes only merchantable tree boles, harvesting biomass feedstock can remove all forms of woody biomass (i.e., live and dead standing woody vegetation, downed woody debris, and stumps) resulting in a greater loss of biomass and nutrients as well as more severe habitat alteration. To investigate the potential impacts of this practice, this study examined the initial impacts (pre- and post-harvest) of various levels of slash and live-tree retention on biomass and nutrient stocks, including carbon (C), nitrogen (N), calcium (Ca), potassium (K), and phosphorus (P), in Populus tremuloides Michx.-dominated forests of northern Minnesota, USA. Treatments examined included three levels of slash retention, whole-tree harvest (WTH), 20% slash retention (20SR), and stem-only harvest (SOH), factored with three levels of green-tree retention, no trees retained (NONE), dispersed retention (DISP), and aggregate retention (AGR). Slash retention was the primary factor affecting post-harvest biomass and nutrient stocks, including woody debris pools. Compared to the unharvested control, stocks of biomass, carbon, and nutrients, including N, Ca, K, and P, in woody debris were higher in all treatments. Stem-only harvests typically contained greater biomass and nutrient stocks than WTH, although biomass and nutrients within 20SR, a level recommended by biomass harvesting guidelines in the US and worldwide, generally did not differ from WTH or SOH. Biomass in smaller-diameter slash material (typically 2.5-22.5 cm in diameter) dominated the woody debris pool following harvest regardless of slash retention level. Trends among treatments in this diameter range were generally similar to those in the total woody debris pool. Specifically, SOH contained significantly greater amounts of biomass than WTH while 20SR was not different from either WTH or

  20. A Tool for Estimating Variability in Wood Preservative Treatment Retention

    Science.gov (United States)

    Patricia K. Lebow; Adam M. Taylor; Timothy M. Young

    2015-01-01

    Composite sampling is standard practice for evaluation of preservative retention levels in preservative-treated wood. Current protocols provide an average retention value but no estimate of uncertainty. Here we describe a statistical method for calculating uncertainty estimates using the standard sampling regime with minimal additional chemical analysis. This tool can...

  1. Variability of Moisture Retention and Hydrophobicity Among Biochars

    Science.gov (United States)

    This research identifies factors and mechanisms that control changes in moisture retention when biochars produced from different feedstocks and under different heat treatment temperatures are mixed with fine sand. While substantial experimental research has been conducted on the ...

  2. Biofilm retention on surfaces with variable roughness and hydrophobicity

    DEFF Research Database (Denmark)

    Tang, Lone; Pillai, Saju; Revsbech, Niels Peter

    2011-01-01

    Biofilms on food processing equipment cause food spoilage and pose a hazard to consumers. The bacterial community on steel surfaces in a butcher’s shop was characterized, and bacteria representative of this community enriched from minced pork were used to study biofilm retention. Stainless steel...

  3. Predicting Teacher Retention Using Stress and Support Variables

    Science.gov (United States)

    Sass, Daniel A.; Seal, Andrea K.; Martin, Nancy K.

    2011-01-01

    Purpose: Teacher attrition is a significant international concern facing administrators. Although a considerable amount of literature exists related to the causes of job dissatisfaction and teachers leaving the profession, relatively few theoretical models test the complex interrelationships between these variables. The goal of this paper is to…

  4. Retention time variability as a mechanism for animal mediated long-distance dispersal.

    Directory of Open Access Journals (Sweden)

    Vishwesha Guttal

    Full Text Available Long-distance dispersal (LDD events, although rare for most plant species, can strongly influence population and community dynamics. Animals function as a key biotic vector of seeds and thus, a mechanistic and quantitative understanding of how individual animal behaviors scale to dispersal patterns at different spatial scales is a question of critical importance from both basic and applied perspectives. Using a diffusion-theory based analytical approach for a wide range of animal movement and seed transportation patterns, we show that the scale (a measure of local dispersal of the seed dispersal kernel increases with the organisms' rate of movement and mean seed retention time. We reveal that variations in seed retention time is a key determinant of various measures of LDD such as kurtosis (or shape of the kernel, thinkness of tails and the absolute number of seeds falling beyond a threshold distance. Using empirical data sets of frugivores, we illustrate the importance of variability in retention times for predicting the key disperser species that influence LDD. Our study makes testable predictions linking animal movement behaviors and gut retention times to dispersal patterns and, more generally, highlights the potential importance of animal behavioral variability for the LDD of seeds.

  5. Variable-retention harvesting as a silvicultural option for lodgepole pine

    Science.gov (United States)

    Christopher R. Keyes; Thomas E. Perry; Elaine K. Sutherland; David K. Wright; Joel M. Egan

    2014-01-01

    Bark beetle-induced mortality in forested landscapes of structurally uniform, even-aged lodgepole pine stands has inspired a growing interest in the potential of silvicultural treatments to enhance resilience by increasing spatial and vertical complexity. Silvicultural treatments can simulate mixed-severity disturbances that create multiaged lodgepole pine stands,...

  6. Field Soil Water Retention of the Prototype Hanford Barrier and Its Variability with Space and Time

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z. F.

    2015-08-14

    Engineered surface barriers are used to isolate underlying contaminants from water, plants, animals, and humans. To understand the flow processes within a barrier and the barrier’s ability to store and release water, the field hydraulic properties of the barrier need to be known. In situ measurement of soil hydraulic properties and their variation over time is challenging because most measurement methods are destructive. A multiyear test of the Prototype Hanford Barrier (PHB) has yielded in situ soil water content and pressure data for a nine-year period. The upper 2 m layer of the PHB is a silt loam. Within this layer, water content and water pressure were monitored at multiple depths at 12 water balance stations using a neutron probe and heat dissipation units. Valid monitoring data from 1995 to 2003 for 4 depths at 12 monitoring stations were used to determine the field water retention of the silt loam layer. The data covered a wide range of wetness, from near saturation to the permanent wilt point, and each retention curve contained 51 to 96 data points. The data were described well with the commonly used van Genuchten water retention model. It was found that the spatial variation of the saturated and residual water content and the pore size distribution parameter were relatively small, while that of the van Genuchten alpha was relatively large. The effects of spatial variability of the retention properties appeared to be larger than the combined effects of added 15% w/w pea gravel and plant roots on the properties. Neither of the primary hydrological processes nor time had a detectible effect on the water retention of the silt loam barrier.

  7. Effects of variable-row-spacing harvesting picker platform scraping plates on cotton fiber quality and quantity

    Directory of Open Access Journals (Sweden)

    Cíntia Michele de Campos Baraviera

    2017-06-01

    Full Text Available There have been increasing demands for high-quality cotton fibers that meet the textile industry quality standards. Concurrently, there have been efforts to reduce contaminants during harvesting to reduce harvesting costs. The goal of this research was to evaluate the efficiency of the picker platform with Variable-Row-Spacing (VRS for harvesting cotton in narrow rows, over two harvest seasons in two regions within the state of Mato Grosso, Brazil. In this study, how the presence vs. absence of scraping plates and variations in travel speed was related to quantifiable levels of impurities the harvested fibers was examined. The research was divided into three experiments (Exp. I, II, and III, using cotton varieties FM 975 WS, IMA 5672 B2 RF, and IMA 5675 B2 RF, with row spacing of 0.45 m. The experimental design was randomized blocks, in a 2 ? 3 factorial design, using the presence/absence of the plate and three speeds (0.61, 1.0, and 1.42 m·s-¹, with seven repetitions, totaling 42 experimental plots. The plot size was 108 m² (3.6 ? 30 m. The data were analyzed using the F test in ANOVA and the post-hoc Tukey test (p < 0.05. The results showed that scraping plates increased the number of stems and cones, and reduced the harvest efficiency of cotton planted in narrow rows in the region of Sorriso-MT during the 2013/2014 harvest. For the 2014/2015 harvest, the highest speed and the presence of the scraping plates increased the number of cones in the cotton samples. In the experiment conducted in Serra da Petrovina, the removal of the scraping plates decreased the amount of cones in the harvested cotton.

  8. Retention and variability of hydrogen (H2) samples stored in plastic syringes

    DEFF Research Database (Denmark)

    Rumessen, J J; Gudmand-Høyer, E

    1987-01-01

    The utility of two brands of 20 ml plastic syringes for storage of hydrogen (H2) samples as obtained in H2 breath tests were studied. Plastipak syringes were found to be significantly better with regard to the stability of the H2 concentration and the variability between the H2 samples. Storage...... of the H2 samples in Plastipak syringes at 5 degrees C significantly improved the H2 retention, whereas refrigeration of H2 samples stored in Once syringes did not reduce H2 loss. Storage of H2 samples in refrigerated plastic syringes is efficient and reliable for several days if syringes with minimal...... sample variation are used....

  9. Post-harvest physiology

    Science.gov (United States)

    Weather and management constraints, as well as the intended use of the harvested forage, all influence the forage harvest system selected by the producer. Generally, maximum retention of dry matter from harvested forage crops is achieved at moistures intermediate between the standing fresh crop and ...

  10. Variability in soil-water retention properties and implications for physics-based simulation of landslide early warning criteria

    Science.gov (United States)

    Thomas, Matthew A.; Mirus, Benjamin B.; Collins, Brian D.; Lu, Ning; Godt, Jonathan W.

    2018-01-01

    Rainfall-induced shallow landsliding is a persistent hazard to human life and property. Despite the observed connection between infiltration through the unsaturated zone and shallow landslide initiation, there is considerable uncertainty in how estimates of unsaturated soil-water retention properties affect slope stability assessment. This source of uncertainty is critical to evaluating the utility of physics-based hydrologic modeling as a tool for landslide early warning. We employ a numerical model of variably saturated groundwater flow parameterized with an ensemble of texture-, laboratory-, and field-based estimates of soil-water retention properties for an extensively monitored landslide-prone site in the San Francisco Bay Area, CA, USA. Simulations of soil-water content, pore-water pressure, and the resultant factor of safety show considerable variability across and within these different parameter estimation techniques. In particular, we demonstrate that with the same permeability structure imposed across all simulations, the variability in soil-water retention properties strongly influences predictions of positive pore-water pressure coincident with widespread shallow landsliding. We also find that the ensemble of soil-water retention properties imposes an order-of-magnitude and nearly two-fold variability in seasonal and event-scale landslide susceptibility, respectively. Despite the reduced factor of safety uncertainty during wet conditions, parameters that control the dry end of the soil-water retention function markedly impact the ability of a hydrologic model to capture soil-water content dynamics observed in the field. These results suggest that variability in soil-water retention properties should be considered for objective physics-based simulation of landslide early warning criteria.

  11. Is Corn Stover Harvest Predictable Using Farm Operation, Technology, and Management Variables?

    Science.gov (United States)

    Crop residue management, provision of animal feed or bedding, and increased income potential are some reasons for harvesting corn (Zea mays L.) stover. Reasons for not doing so are that crop residue is essential for restoring soil organic matter, protecting against wind and water erosion, and cyclin...

  12. Spatial and Temporal Variability of Channel Retention in a Lowland Temperate Forest Stream Settled by European Beaver (Castor fiber

    Directory of Open Access Journals (Sweden)

    Mateusz Grygoruk

    2014-09-01

    Full Text Available Beaver ponds remain a challenge for forest management in those countries where expansion of beaver (Castor fiber is observed. Despite undoubted economic losses generated in forests by beaver, their influence on hydrology of forest streams especially in terms of increasing channel retention (amount of water stored in the river channel, is considered a positive aspect of their activity. In our study, we compared water storage capacities of a lowland forest stream settled by beaver in order to unravel the possible temporal variability of beaver’s influence on channel retention. We compared distribution, total damming height, volumes and areas of beaver ponds in the valley of Krzemianka (Northeast Poland in the years 2006 (when a high construction activity of beaver was observed and in 2013 (when the activity of beaver decreased significantly. The study revealed a significant decrease of channel retention of beaver ponds from over 15,000 m3 in 2006 to 7000 m3 in 2013. The total damming height of the cascade of beaver ponds decreased from 6.6 to 5.6 m. Abandoned beaver ponds that transferred into wetlands, where lost channel retention was replaced by soil and groundwater retention, were more constant over time and less vulnerable to the external disturbance means of water storage than channel retention. We concluded that abandoned beaver ponds played an active role in increasing channel retention of the river analyzed for approximately 5 years. We also concluded that if the construction activity of beaver was used as a tool (ecosystem service in increasing channel retention of the river valley, the permanent presence of beaver in the riparian zone of forest streams should have been assured.

  13. Retention and Curve Number Variability in a Small Agricultural Catchment: The Probabilistic Approach

    Directory of Open Access Journals (Sweden)

    Kazimierz Banasik

    2014-04-01

    Full Text Available The variability of the curve number (CN and the retention parameter (S of the Soil Conservation Service (SCS-CN method in a small agricultural, lowland watershed (23.4 km2 to the gauging station in central Poland has been assessed using the probabilistic approach: distribution fitting and confidence intervals (CIs. Empirical CNs and Ss were computed directly from recorded rainfall depths and direct runoff volumes. Two measures of the goodness of fit were used as selection criteria in the identification of the parent distribution function. The measures specified the generalized extreme value (GEV, normal and general logistic (GLO distributions for 100-CN and GLO, lognormal and GEV distributions for S. The characteristics estimated from theoretical distribution (median, quantiles were compared to the tabulated CN and to the antecedent runoff conditions of Hawkins and Hjelmfelt. The distribution fitting for the whole sample revealed a good agreement between the tabulated CN and the median and between the antecedent runoff conditions (ARCs of Hawkins and Hjelmfelt, which certified a good calibration of the model. However, the division of the CN sample due to heavy and moderate rainfall depths revealed a serious inconsistency between the parameters mentioned. This analysis proves that the application of the SCS-CN method should rely on deep insight into the probabilistic properties of CN and S.

  14. Climate and Long-Term Structures: The Wine-Harvesting Variable

    International Nuclear Information System (INIS)

    Le Roy Ladurie, Emmanuel

    2006-01-01

    Based on the history of wine harvests, it is possible to develop a more general history of climate, particularly in Europe. This history-the alternating cycle of warm and cool seasons-can also be related to the economic, and thus political, history of our countries, from the 14. century to the global warming of the 20. century. The role of the meteorologist in understanding these structures is therefore crucial

  15. Effects of variable attachment shapes and aligner material on aligner retention.

    Science.gov (United States)

    Dasy, Hiltrud; Dasy, Andreas; Asatrian, Greg; Rózsa, Noémi; Lee, Hao-Fu; Kwak, Jin Hee

    2015-11-01

    To evaluate the retention of four types of aligners on a dental arch with various attachments. For this study, three casts were manufactured, two of which contained attachments (ellipsoid and beveled), and one without any attachments to serve as a control. Four types of aligners were thermoformed: Clear-Aligner (CA)-soft, CA-medium, and CA-hard, with various thicknesses, and Essix ACE. Measurements of vertical displacement force during aligner removal were performed with the Gabo Qualimeter Eplexor. Means and standard deviations were next compared between different aligner thicknesses and attachment shapes. CA-soft, CA-medium, and CA-hard did not present a significant increase in retention, except when used in the presence of attachments. Additionally, CA-medium and CA-hard required significantly more force for removal. Essix ACE demonstrated a significant decrease in retention when used with ellipsoid attachments. The force value for Essix ACE removal from the cast with beveled attachments was comparable to that of CA-medium. Forces for aligner removal from the model without attachments showed a linear trend. Essix ACE did not show a continuous increase in retention for each model. Overall, ellipsoid attachments did not present a significant change in retention. In contrast, beveled attachments improved retention. Ellipsoid attachments had no significant influence on the force required for aligner removal and hence on aligner retention. Essix ACE showed significantly less retention than CA-hard on the models with attachments. Furthermore, beveled attachments were observed to increase retention significantly, compared with ellipsoid attachments and when using no attachments.

  16. Soil Cd, Cr, Cu, Ni, Pb and Zn sorption and retention models using SVM: Variable selection and competitive model.

    Science.gov (United States)

    González Costa, J J; Reigosa, M J; Matías, J M; Covelo, E F

    2017-09-01

    The aim of this study was to model the sorption and retention of Cd, Cu, Ni, Pb and Zn in soils. To that extent, the sorption and retention of these metals were studied and the soil characterization was performed separately. Multiple stepwise regression was used to produce multivariate models with linear techniques and with support vector machines, all of which included 15 explanatory variables characterizing soils. When the R-squared values are represented, two different groups are noticed. Cr, Cu and Pb sorption and retention show a higher R-squared; the most explanatory variables being humified organic matter, Al oxides and, in some cases, cation-exchange capacity (CEC). The other group of metals (Cd, Ni and Zn) shows a lower R-squared, and clays are the most explanatory variables, including a percentage of vermiculite and slime. In some cases, quartz, plagioclase or hematite percentages also show some explanatory capacity. Support Vector Machine (SVM) regression shows that the different models are not as regular as in multiple regression in terms of number of variables, the regression for nickel adsorption being the one with the highest number of variables in its optimal model. On the other hand, there are cases where the most explanatory variables are the same for two metals, as it happens with Cd and Cr adsorption. A similar adsorption mechanism is thus postulated. These patterns of the introduction of variables in the model allow us to create explainability sequences. Those which are the most similar to the selectivity sequences obtained by Covelo (2005) are Mn oxides in multiple regression and change capacity in SVM. Among all the variables, the only one that is explanatory for all the metals after applying the maximum parsimony principle is the percentage of sand in the retention process. In the competitive model arising from the aforementioned sequences, the most intense competitiveness for the adsorption and retention of different metals appears between

  17. The influence of salivary variables on fluoride retention in dental plaque exposed to a mineral-enriching solution.

    Science.gov (United States)

    Kato, K; Nakagaki, H; Arai, K; Pearce, E I F

    2002-01-01

    This study was carried out to examine interindividual differences in salivary variables related to plaque accumulation and to estimate their influence on the fluoride retention in plaque in vivo by a mineral-enriching solution. Two saliva samples were taken from 10 subjects, once after brushing and once after 24 h without brushing. Calcium, phosphate and monofluorophosphatase (MFPase) activity in the saliva samples were determined. The salivary flow rate and the debris index were also recorded. After plaque had formed over 3 days within in situ plaque-generating devices, subjects were instructed to rinse with a mineral-enriching mouthrinse three times a day on 4 consecutive days. Plaque exposed to distilled water plus flavoring agents served as a control. Fluoride-free dentifrice was used during the experimental period. Twenty-four hours after the last rinsing, the samples were removed from the mouth, and fluoride and mineral distributions in plaque analyzed using a method previously reported by the authors. Salivary flow, MFPase activity and calcium concentration in saliva were significantly higher after 24 h of plaque accumulation. Rinsing with the mineral-enriching solution produced retention of fluoride and phosphate in the outer and middle layers of plaque. Salivary calcium concentration had a direct effect on fluoride uptake in plaque, but no obvious relationship was found between other salivary variables and the plaque fluoride retention. The salivary calcium effect may be due to enhanced bacterial cell wall binding of fluoride via calcium bridging. Copyright 2002 S. Karger AG, Basel

  18. Of sports and politics: Predicting category-specific retention of news events from demographic variables

    NARCIS (Netherlands)

    Meeter, M.; Ochtman, D.J.C.; Janssen, S.M.J.; Murre, J.M.J.

    2010-01-01

    Many tests of retrograde amnesia consist of questions on news events. It is therefore important to know how such questions are answered by normal adults. We analysed the retention of news events in a sample of 12,913 participants, who provided basic demographic information and subsequently answered

  19. Of sports and politics: Predicting category-specific retention of news events from demographic variables.

    NARCIS (Netherlands)

    Meeter, M.; Ochtman, D.J.C.; Janssen, S.M.J.; Murre, J.M.J.

    2010-01-01

    Many tests of retrograde amnesia consist of questions on news events. It is therefore important to know how such questions are answered by normal adults. We analysed the retention of news events in a sample of 12,913 participants, who provided basic demographic information and subsequently answered

  20. Nitrogen replenishment using variable rate application technique in a small hand-harvested pear orchard

    International Nuclear Information System (INIS)

    Vatsanidou, A.; Nanos, G.D.; Fountas, S.; Baras, J.; Castrignano, A.; Gemtos, T.A.

    2017-01-01

    Precision agriculture is a management approach for sustainable agriculture. It can be applied even in small fields. It aims to optimize inputs, improve profits, and reduce adverse environmental impacts. In this study, a series of measurements were conducted over three growing seasons to assess variability in a 0.55 ha pear orchard located in central Greece. Soil ECa was measured using EM38 sensor, while soil samples were taken from a grid 17 × 8 m and analysed for texture, pH, P, K, Mg, CaCO3, and organic matter content. Data analysis indicated that most of the nutrients were at sufficient levels. Soil and yield maps showed considerable variability while fruit quality presented small variations across the orchard. Yield fluctuations were observed, possibly due to climatic conditions. Prescription maps were developed for nitrogen variable rate application (VRA) for two years based on the replacement of the nutrients removed by the crop. VRA application resulted in 56% and 50% reduction of N fertiliser compared to uniform application.

  1. Nitrogen replenishment using variable rate application technique in a small hand-harvested pear orchard

    Energy Technology Data Exchange (ETDEWEB)

    Vatsanidou, A.; Nanos, G.D.; Fountas, S.; Baras, J.; Castrignano, A.; Gemtos, T.A.

    2017-07-01

    Precision agriculture is a management approach for sustainable agriculture. It can be applied even in small fields. It aims to optimize inputs, improve profits, and reduce adverse environmental impacts. In this study, a series of measurements were conducted over three growing seasons to assess variability in a 0.55 ha pear orchard located in central Greece. Soil ECa was measured using EM38 sensor, while soil samples were taken from a grid 17 × 8 m and analysed for texture, pH, P, K, Mg, CaCO3, and organic matter content. Data analysis indicated that most of the nutrients were at sufficient levels. Soil and yield maps showed considerable variability while fruit quality presented small variations across the orchard. Yield fluctuations were observed, possibly due to climatic conditions. Prescription maps were developed for nitrogen variable rate application (VRA) for two years based on the replacement of the nutrients removed by the crop. VRA application resulted in 56% and 50% reduction of N fertiliser compared to uniform application.

  2. Nitrogen replenishment using variable rate application technique in a small hand-harvested pear orchard

    Directory of Open Access Journals (Sweden)

    Anna Vatsanidou

    2018-02-01

    Full Text Available Precision agriculture is a management approach for sustainable agriculture. It can be applied even in small fields. It aims to optimize inputs, improve profits, and reduce adverse environmental impacts. In this study, a series of measurements were conducted over three growing seasons to assess variability in a 0.55 ha pear orchard located in central Greece. Soil ECa was measured using EM38 sensor, while soil samples were taken from a grid 17 × 8 m and analysed for texture, pH, P, K, Mg, CaCO3, and organic matter content. Data analysis indicated that most of the nutrients were at sufficient levels. Soil and yield maps showed considerable variability while fruit quality presented small variations across the orchard. Yield fluctuations were observed, possibly due to climatic conditions. Prescription maps were developed for nitrogen variable rate application (VRA for two years based on the replacement of the nutrients removed by the crop. VRA application resulted in 56% and 50% reduction of N fertiliser compared to uniform application.

  3. Multiple diseases impact survival of pine species planted in red spine stands harvested in spatially variable retention patterns

    Science.gov (United States)

    M.E. Ostry; M.J. Moore; C.C. Kern; R.C. Venette; B.J. Palik

    2012-01-01

    Increasing the diversity of species and structure of red pine (Pinus resinosa) is often a management goal in stands simplified by practices such as fire suppression and plantation management in many areas of the Great Lakes Region. One approach to diversification is to convert predominantly even-aged, pure red pine stands to multi-cohort, mixed-...

  4. Solar harvesting by a heterostructured cell with built-in variable width quantum wells

    Science.gov (United States)

    Brooks, W.; Wang, H.; Mil'shtein, S.

    2018-02-01

    We propose cascaded heterostructured p-i-n solar cells, where inside of the i-region is a set of Quantum Wells (QWs) with variable thicknesses to enhance absorption of different photonic energies and provide quick relaxation for high energy carriers. Our p-i-n heterostructure carries top p-type and bottom n-type 11.3 Å thick AlAs layers, which are doped by acceptors and donor densities up to 1019/cm3. The intrinsic region is divided into 10 segments where each segment carries ten QWs of the same width and the width of the QWs in each subsequent segment gradually increases. The top segment consists of 10 QWs with widths of 56.5Å, followed by a segment with 10 wider QWs with widths of 84.75Å, followed by increasing QW widths until the last segment has 10 QWs with widths of 565Å, bringing the total number of QWs to 100. The QW wall height is controlled by alternating AlAs and GaAs layers, where the AlAs layers are all 11.3Å thick, throughout the entire intrinsic region. Configuration of variable width QWs prescribes sets of energy levels which are suitable for absorption of a wide range of photon energies and will dissipate high electron-hole energies rapidly, reducing the heat load on the solar cell. We expect that the heating of the solar cell will be reduced by 8-11%, enhancing efficiency. The efficiency of the designed solar cell is 43.71%, the Fill Factor is 0.86, the density of short circuit current (ISC) will not exceed 338 A/m2 and the open circuit voltage (VOC) is 1.51V.

  5. Response of the soil microbial community and soil nutrient bioavailability to biomass harvesting and reserve tree retention in northern Minnesota aspen-dominated forests

    Science.gov (United States)

    Tera E. Lewandowski; Jodi A. Forrester; David J. Mladenoff; Anthony W. D' Amato; Brian J. Palik

    2016-01-01

    Intensive forest biomass harvesting, or the removal of harvesting slash (woody debris from tree branches and tops) for use as biofuel, has the potential to negatively affect the soil microbial community (SMC) due to loss of carbon and nutrient inputs from the slash, alteration of the soil microclimate, and increased nutrient leaching. These effects could result in...

  6. Carpological variability of almond (Prunus dulcis [Mill.] D.A. Webb cv Nonpareil) in a single orchard during seven consecutive harvests

    Science.gov (United States)

    A multi-year study was conducted in California’s San Joaquin Valley to examine variability of carpological characteristics of the popular ‘Nonpareil’ almond cultivar. Samples of ‘Nonpareil’ almond fruit were collected from a single orchard during seven consecutive harvests and evaluated for 19 spec...

  7. Short time-scale wind forced variability in the Río de la Plata Estuary and its role on ichthyoplankton retention

    Science.gov (United States)

    Simionato, C. G.; Berasategui, A.; Meccia, V. L.; Acha, M.; Mianzan, H.

    2008-01-01

    The Río de la Plata Estuary presents a strong bottom salinity front located over a submerged shoal. Apparently favored by retention processes, it is a spawning ground for several coastal fishes. This estuary is very shallow and essentially wind driven and, moreover, in time scales relevant to biota, estuarine circulation is wind dominated and highly variable. Two intriguing questions are, therefore, how this system can favor retention and what the involved mechanisms are. This paper qualitatively explores mechanisms involved in the estuary where retention is favored applying numerical simulations in which neutral particles - simulating fish eggs and early larvae - are released along the bottom frontal zone and tracked for different wind conditions. Results suggest that retentive features can be a consequence of estuarine response to natural wind variability acting over bathymetric features. For winds from most directions, particles either remain trapped near their launching position or move northeastward to southwestward along the shoal. As alternation of winds that favor along-shoal motion is the dominant feature of wind variability in the region, a retentive scenario results from prevailing wind variability. Additionally, winds that tend to export particles with a poor chance of being restored to the front are neither frequent nor persistent. Results show, therefore, that physical forcing alone might generate a retentive scenario at the inner part of this estuary. The physical retention mechanism is more effective for bottom than for surface launched particles. Wind statistics indicate that the proposed mechanism has different implications for retention along the seasons. Spring is the most favorable season, followed by summer, when particles would have a larger propensity to reach the southern area of the estuary (Samborombón Bay). Fall and winter are increasingly less favorable. All these features are consistent with patterns observed in the region in

  8. Physiological age at harvest regulates the variability in postharvest ripening, sensory and nutritional characteristics of mango (Mangifera indica L.) cv. Coghshall due to growing conditions.

    Science.gov (United States)

    Joas, Jacques; Vulcain, Emmanuelle; Desvignes, Claire; Morales, Emeline; Léchaudel, Mathieu

    2012-04-01

    Climacteric fruits are harvested at the green-mature stage and ripen during their marketing cycle. However, growing conditions induce variability into the maturity stage of mangoes at harvest, with an impact on their final quality. Assuming that the physiological age can be correctly evaluated by a criterion based on the variable chlorophyll fluorescence of the skin (F(v)) and that differences in physiological age depend on growing conditions, controlled stress experiments were carried out on mango fruit by manipulating either the leaf/fruit ratio or the light environment. Delays from 9 to 30 days were observed, depending on stress level and harvest stage, to obtain the same F(v) value. For moderate stress, fruit composition after ripening was partially compensated for, with little or no difference in sugar, dry matter, carotenoid and aroma contents. For more pronounced stress, the major metabolites were not particularly affected, but the synthesis capacity of carotenoids and aromas was lower after maturity. The ripening ability of a fruit is acquired on the tree and defines its postharvest changes. Control of the physiological age at harvest can minimise the variability observed under natural conditions and guarantee fruit batches whose postharvest changes will be relatively homogeneous. Copyright © 2011 Society of Chemical Industry.

  9. Level and pattern of overstory retention influence rates and forms of tree mortality in mature, coniferous forests of the Pacific Northwest, USA

    Science.gov (United States)

    Lauren S. Urgenson; Charles B. Halpern; Paul D. Anderson

    2013-01-01

    Mortality of retained trees can compromise the ecological objectives of variable-retention harvest. We used a large-scale experiment replicated at six locations in western Washington and Oregon to examine the influences of retention level (40% vs. 15% of original basal area) and its spatial pattern (aggregated vs.dispersed) on the rate and form of tree mortality for 11...

  10. VARIABILITY IN SOILS AND VEGETATION ASSOCIATED WITH HARVESTER ANT (POGONOMYRMEX RUGOSUS) NESTS ON A CHIHUAHUAN DESERT WATERSHED

    Science.gov (United States)

    The effects of harvester ant (Pogonomyrmex rugosus) nests on the density and cover of spring annual plants and on soil characteristics were measured at three locations characterized by different soils and dominant vegetation on a desert watershed. There were few differences in ve...

  11. Climatic variability and its role in regulating C, N and P retention in the James River Estuary

    Science.gov (United States)

    Bukaveckas, Paul A.; Beck, Michael; Devore, Dana; Lee, William M.

    2018-05-01

    Transformations and retention of C, N and P inputs to estuaries are subject to external factors such as discharge-driven variation in loading rates, and internal processes regulating biogeochemical cycles. We used an 8-year time series of finely resolved (monthly) mass balances for the tidal freshwater segment of the James River Estuary to assess the influence of discharge and temperature on C, N and P retention. Peak export and retention of organic, likely particulate, fractions occurred in months of highest discharge. With increasing discharge we observed higher mass retention, greater proportional retention (in relation to inputs) and more selective retention (with P retained preferentially over N and C). DIN retention was strongly influenced by water temperature with 10-fold high retention occurring at high (>20 °C) vs. low (estuaries is in dissolved inorganic form, and therefore subject to temperature dependent rates of biological assimilation and denitrification. By contrast, the bulk of the P load was in particulate form, which is retained via sediment trapping, and not appreciably affected by water temperature. The tidal freshwater estuary was an important site for nutrient removal where the accumulation of N- and P- rich materials may delay recovery in response to nutrient load reductions.

  12. Design optimization under uncertainty and speed variability for a piezoelectric energy harvester powering a tire pressure monitoring sensor

    Science.gov (United States)

    Toghi Eshghi, Amin; Lee, Soobum; Kazem Sadoughi, Mohammad; Hu, Chao; Kim, Young-Cheol; Seo, Jong-Ho

    2017-10-01

    Energy harvesting (EH) technologies to power small sized electronic devices are attracting great attention. Wasted energy in a vehicle’s rotating tire has a great potential to enable self-powered tire pressure monitoring sensors (TPMS). Piezoelectric type energy harvesters can be used to collect vibrational energy and power such systems. Due to the presence of harsh acceleration in a rotating tire, a design tradeoff needs to be studied to prolong the harvester’s fatigue life as well as to ensure sufficient power generation. However, the design by traditional deterministic design optimization (DDO) does not show reliable performance due to the lack of consideration of various uncertainty factors (e.g., manufacturing tolerances, material properties, and loading conditions). In this study, we address a new EH design formulation that considers the uncertainty in car speed, dimensional tolerances and material properties, and solve this design problem using reliability-based design optimization (RBDO). The RBDO problem is formulated to maximize compactness and minimize weight of a TPMS harvester while satisfying power and durability requirements. A transient analysis has been done to measure the time varying response of EH such as power generation, dynamic strain, and stress. A conservative design formulation is proposed to consider the expected power from varied speed and stress at higher speed. When compared to the DDO, the RBDO results show that the reliability of EH is increased significantly by scarifying the objective function. Finally, experimental test has been conducted to demonstrate the merits of RBDO design over DDO.

  13. Wind energy harvesting with a piezoelectric harvester

    International Nuclear Information System (INIS)

    Wu, Nan; Wang, Quan; Xie, Xiangdong

    2013-01-01

    An energy harvester comprising a cantilever attached to piezoelectric patches and a proof mass is developed for wind energy harvesting, from a cross wind-induced vibration of the cantilever, by the electromechanical coupling effect of piezoelectric materials. The vibration of the cantilever under the cross wind is induced by the air pressure owing to a vortex shedding phenomenon that occurs on the leeward side of the cantilever. To describe the energy harvesting process, a theoretical model considering the cross wind-induced vibration on the piezoelectric coupled cantilever energy harvester is developed, to calculate the charge and the voltage from the harvester. The influences of the length and location of the piezoelectric patches as well as the proof mass on the generated electric power are investigated. Results show that the total generated electric power can be as high as 2 W when the resonant frequency of the cantilever harvester is close to the vortex shedding frequency. Moreover, a value of total generated electric power up to 1.02 W can be practically realized for a cross wind with a variable wind velocity of 9–10 m s −1 by a harvester with a length of 1.2 m. This research facilitates an effective and compact wind energy harvesting device. (paper)

  14. Physiology and growth of redwood and Douglas-fir planted after variable density retention outside redwood’s range

    Science.gov (United States)

    Lucy Kerhoulas; Nicholas Kerhoulas; Wade Polda; John-Pascal Berrill

    2017-01-01

    Reforestation following timber harvests is an important topic throughout the coast redwood (Sequoia sempervirens (D. Don) Endl.) range. Furthermore, as drought-induced mortality spreads across many of California’s forests, it is important to understand how physiology and stand structure influence reforestation success. Finally, as climate...

  15. Size variability of the unit building block of peripheral light-harvesting antennas as a strategy for effective functioning of antennas of variable size that is controlled in vivo by light intensity.

    Science.gov (United States)

    Taisova, A S; Yakovlev, A G; Fetisova, Z G

    2014-03-01

    This work continuous a series of studies devoted to discovering principles of organization of natural antennas in photosynthetic microorganisms that generate in vivo large and highly effective light-harvesting structures. The largest antenna is observed in green photosynthesizing bacteria, which are able to grow over a wide range of light intensities and adapt to low intensities by increasing of size of peripheral BChl c/d/e antenna. However, increasing antenna size must inevitably cause structural changes needed to maintain high efficiency of its functioning. Our model calculations have demonstrated that aggregation of the light-harvesting antenna pigments represents one of the universal structural factors that optimize functioning of any antenna and manage antenna efficiency. If the degree of aggregation of antenna pigments is a variable parameter, then efficiency of the antenna increases with increasing size of a single aggregate of the antenna. This means that change in degree of pigment aggregation controlled by light-harvesting antenna size is biologically expedient. We showed in our previous work on the oligomeric chlorosomal BChl c superantenna of green bacteria of the Chloroflexaceae family that this principle of optimization of variable antenna structure, whose size is controlled by light intensity during growth of bacteria, is actually realized in vivo. Studies of this phenomenon are continued in the present work, expanding the number of studied biological materials and investigating optical linear and nonlinear spectra of chlorosomes having different structures. We show for oligomeric chlorosomal superantennas of green bacteria (from two different families, Chloroflexaceae and Oscillochloridaceae) that a single BChl c aggregate is of small size, and the degree of BChl c aggregation is a variable parameter, which is controlled by the size of the entire BChl c superantenna, and the latter, in turn, is controlled by light intensity in the course of cell

  16. Wettability of poultry litter biochars at variable pyrolysis temperatures and their impact on soil wettability and water retention relationships

    Science.gov (United States)

    Yi, S. C.; Witt, B.; Guo, M.; Chiu, P.; Imhoff, P. T.

    2012-12-01

    To reduce the impact of poultry farming on greenhouse gas emissions, poultry farming waste - poultry litter - can be converted to biofuel and biochar through slow-pyrolysis, with the biochar added to agricultural soil for nutrient enrichment and carbon sequestration. While biochars from source materials other than poultry litter have been shown to sequester carbon and increase soil fertility, there is considerable variability in biochar behavior - even with biochars created from the same source material. This situation is exacerbated by our limited understanding of how biochars alter physical, chemical, and biological processes in agricultural soils. The focus of this work is to develop a mechanistic understanding of how poultry litter (PL) biochars affect the hydrology, microbial communities, N2O emissions, and nitrogen cycling in agricultural soils. The initial focus is on the impact of PL biochar on soil hydrology. PL from Perdue AgriRecycle, LLC (Seaford, Delaware) was used to produce biochars at pyrolysis temperatures from 300°C to 600°C. To explore the impact of these biochars on soil wettability, the PL biochars were mixed with a 30/40 Accusand in mass fractions from 0% to 100%. The water contact angle was then measured using a goniometer on these sand/biochar mixtures using the sessile drop method and a single layer of sample particles. The PL biochars produced at temperatures between 300°C to 400°C were hydrophobic, while those pyrolized at > 400°C were hydrophilic. Water contact angles for samples with 100% biochar varied systematically with pyrolysis temperature, decreasing from 101.12° to 20.57° as the pyrolysis temperature increased from 300 to 600°C. Even for small amounts of hydrophobic biochar added to the hydrophilic sand, the contact angle of the mixture was altered: for sand/biochar mixtures containing only 2% hydrophobic PL biochar by weight, the contact angle of the mixture increased from ~ 8° (0% biochar) to 20° (2% biochar). For

  17. Evaluation of Colloid Retention Site Dominance in Variably Saturated Porous Media: An All Pores Pore-Scale Analysis

    Science.gov (United States)

    Morales, Veronica; Perez-Reche, Francisco; Holzner, Markus; Kinzelbach, Wolfgang

    2016-04-01

    It is well accepted that colloid and nanoparticle transport processes in porous media differ substantially between water saturated and unsaturated conditions. Differences are frequently ascribed to particle immobilization by association with interfaces with the gas, as well as to restrictions of the liquid medium through which colloids are transported. Yet, the current understanding of the importance of particle retention at gas interfaces is based on observations of single pores or two-dimensional pore network representations, leaving open the question of their statistical significance when all pores in the medium are considered. In order to address this question, column experiments were performed using a model porous medium of glass beads through which Silver particles were transported for conditions of varying water content and water chemistry. X-ray microtomography was subsequently employed as a non-destructive imaging technique to obtain pore-scale information of the entire column regarding: i) the presence and distribution of the main locations where colloids can become retained (interfaces with the water-solid, air-water, air-solid, and air-water-solid, grain-grain contacts, and the bulk liquid), ii) deposition profiles of colloids along the column classified by the available retention location, and iii) channel widths of 3-dimensional pore-water network representations. The results presented provide a direct statistical evaluation on the significance of colloid retention by attachment to interfaces or by strainig at contact points where multiple interfaces meet.

  18. Variability after 15 Years of Vegetation Recovery in Natural Secondary Forest with Timber Harvesting at Different Intensities in Southeastern China: Community Diversity and Stability

    Directory of Open Access Journals (Sweden)

    Zhilong Wu

    2018-01-01

    Full Text Available The mixed Cunninghamia lanceolata (Lamb. Hook., Pinus massoniana Lamb., and hardwood forest in southeastern China is a major assemblage in natural secondary forests, and of national and international importance in terms of both timber and ecosystem services. However, over-harvesting has threatened its long-term sustainability, and there is a knowledge gap relating to the effect of harvesting on the ecosystem. After conifer species were selected for harvesting, the mixed Chinese fir, pine, and hardwood forest was changed into mixed evergreen broadleaf forest. In this context, we observed the restoration dynamics of plant communities over a period of 15 years (1996 to 2011 with different levels of harvesting intensity, including selective harvesting at low (13.0% removal of growing stock volume, medium (29.1%, high (45.8%, and extra-high (67.1% intensities, as well as clear-cut harvesting (100.0%, with non-harvesting as the control, based on permanent sample plots established in a randomized block design in these forests in southeastern China. The impact on the richness, diversity, and evenness of plant species derived from descriptive statistical analyses was shown to initially increase, and then decrease, with an increase in harvesting intensity. The most critical impacts were on the richness, diversity, and evenness of shrub and herb species. Richness, diversity, and evenness of plant species recovered and increased under selective harvesting at low and medium intensities, while these parameters had not recovered and significantly decreased under selective harvesting at high and extra-high intensities, as well as with clear-cut harvesting. The impact on the plant community stability was derived from the stability test method of the improved Godron M. The plant community stability was closest to the point of stability (20/80 under selective harvesting at medium intensity, followed by selective harvesting at low intensity. The plant community

  19. Iron Retention in Root Hemicelluloses Causes Genotypic Variability in the Tolerance to Iron Deficiency-Induced Chlorosis in Maize

    Directory of Open Access Journals (Sweden)

    Rongli Shi

    2018-04-01

    Full Text Available Antagonistic interactions of phosphorus (P hamper iron (Fe acquisition by plants and can cause Fe deficiency-induced chlorosis. To determine the physiological processes underlying adverse Fe–P interactions, the maize lines B73 and Mo17, which differ in chlorosis susceptibility, were grown hydroponically at different Fe:P ratios. In the presence of P, Mo17 became more chlorotic than B73. The higher sensitivity of Mo17 to Fe deficiency was not related to Fe–P interactions in leaves but to lower Fe translocation to shoots, which coincided with a larger pool of Fe being fixed in the root apoplast of P-supplied Mo17 plants. Fractionating cell wall components from roots showed that most of the cell wall-contained P accumulated in pectin, whereas most of the Fe was bound to root hemicelluloses, revealing that co-precipitation of Fe and P in the apoplast was not responsible for Fe inactivation in roots. A negative correlation between chlorophyll index and hemicellulose-bound Fe in 85 inbred lines of the intermated maize B73 × Mo17 (IBM population indicated that apoplastic Fe retention contributes to genotypic differences in chlorosis susceptibility of maize grown under low Fe supplies. Our study indicates that Fe retention in the hemicellulose fraction of roots is an important determinant in the tolerance to Fe deficiency-induced chlorosis of graminaceous plant species with low phytosiderophore release, like maize.

  20. Reconfigurable Charge Pump Circuit with Variable Pumping Frequency Scheme for Harvesting Solar Energy under Various Sunlight Intensities

    Directory of Open Access Journals (Sweden)

    Jeong Heon Kim

    2014-01-01

    Full Text Available We propose variable pumping frequency (VPF scheme which is merged with the previous reconfigurable charge pump (RCP circuit that can change its architecture according to a given sunlight condition. Here, merging the VPF scheme with the architecture reconfiguration can improve percentage output currents better by 21.4% and 22.4% than RCP circuit with the fixed pumping frequencies of 7 MHz and 15 MHz, respectively. Comparing the VPF scheme with real maximum power points (MPP, the VPF can deliver 91.9% of the maximum amount of output current to the load on average. In terms of the power and area overheads, the VPF scheme proposed in this paper consumes the power by 0.4% of the total power consumption and occupies the layout area by 1.61% of the total layout area.

  1. Temporal and kinematic variables for real-world falls harvested from lumbar sensors in the elderly population.

    Science.gov (United States)

    Bourke, A K; Klenk, J; Schwickert, L; Aminian, K; Ihlen, E A F; Helbostad, J L; Chiari, L; Becker, C

    2015-01-01

    Automatic fall detection will reduce the consequences of falls in the elderly and promote independent living, ensuring people can confidently live safely at home. Inertial sensor technology can distinguish falls from normal activities. However, fall data recorded from elderly people in real life. The FARSEEING project has compiled a database of real life falls from elderly people, to gain new knowledge about fall events. We have extracted temporal and kinematic parameters to further improve the development of fall detection algorithms. A total of 100 real-world falls were analysed. Subjects with a known fall history were recruited, inertial sensors were attached to L5 and a fall report, following a fall, was used to extract the fall signal. This data-set was examined, and variables were extracted that include upper and lower impact peak values, posture angle change during the fall and time of occurrence. These extracted parameters, can be used to inform the design of fall-detection algorithms for real-world falls detection in the elderly.

  2. Ecological forestry: Much more than retention harvesting

    Science.gov (United States)

    Brian J. Palik; Anthony W. D' Amato

    2017-01-01

    We read with interest the recent Journal of Forestry article on "Conceptual Ambiguities and Practical Challenges of Ecological Forestry: A Critical Review" (Batavia and Nelson 2016). In it, Batavia and Nelson do a good job of bringing attention to the concept of ecological forestry, and we agree that a clear understanding of what it is...

  3. Canopy arthropod response to density and distribution of green trees retained after partial harvest.

    Science.gov (United States)

    Timothy D. Schowalter; Yanli Zhang; Robert A. Progar

    2005-01-01

    We measured canopy arthropod responses to six contrasting green-tree retention treatments at six locations (blocks) in western Oregon and Washington as part of the Demonstration of Ecosystem Management Options (DEMO) study. Treatments were 100% retention (uncut), 75% retention with three 1-ha harvested gaps, 40% dispersed retention, 40% aggregated retention with five 1...

  4. [Survival strategy of photosynthetic organisms. 1. Variability of the extent of light-harvesting pigment aggregation as a structural factor optimizing the function of oligomeric photosynthetic antenna. Model calculations].

    Science.gov (United States)

    Fetisova, Z G

    2004-01-01

    In accordance with our concept of rigorous optimization of photosynthetic machinery by a functional criterion, this series of papers continues purposeful search in natural photosynthetic units (PSU) for the basic principles of their organization that we predicted theoretically for optimal model light-harvesting systems. This approach allowed us to determine the basic principles for the organization of a PSU of any fixed size. This series of papers deals with the problem of structural optimization of light-harvesting antenna of variable size controlled in vivo by the light intensity during the growth of organisms, which accentuates the problem of antenna structure optimization because optimization requirements become more stringent as the PSU increases in size. In this work, using mathematical modeling for the functioning of natural PSUs, we have shown that the aggregation of pigments of model light-harvesting antenna, being one of universal optimizing factors, furthermore allows controlling the antenna efficiency if the extent of pigment aggregation is a variable parameter. In this case, the efficiency of antenna increases with the size of the elementary antenna aggregate, thus ensuring the high efficiency of the PSU irrespective of its size; i.e., variation in the extent of pigment aggregation controlled by the size of light-harvesting antenna is biologically expedient.

  5. A global data set of soil hydraulic properties and sub-grid variability of soil water retention and hydraulic conductivity curves

    Science.gov (United States)

    Montzka, Carsten; Herbst, Michael; Weihermüller, Lutz; Verhoef, Anne; Vereecken, Harry

    2017-07-01

    Agroecosystem models, regional and global climate models, and numerical weather prediction models require adequate parameterization of soil hydraulic properties. These properties are fundamental for describing and predicting water and energy exchange processes at the transition zone between solid earth and atmosphere, and regulate evapotranspiration, infiltration and runoff generation. Hydraulic parameters describing the soil water retention (WRC) and hydraulic conductivity (HCC) curves are typically derived from soil texture via pedotransfer functions (PTFs). Resampling of those parameters for specific model grids is typically performed by different aggregation approaches such a spatial averaging and the use of dominant textural properties or soil classes. These aggregation approaches introduce uncertainty, bias and parameter inconsistencies throughout spatial scales due to nonlinear relationships between hydraulic parameters and soil texture. Therefore, we present a method to scale hydraulic parameters to individual model grids and provide a global data set that overcomes the mentioned problems. The approach is based on Miller-Miller scaling in the relaxed form by Warrick, that fits the parameters of the WRC through all sub-grid WRCs to provide an effective parameterization for the grid cell at model resolution; at the same time it preserves the information of sub-grid variability of the water retention curve by deriving local scaling parameters. Based on the Mualem-van Genuchten approach we also derive the unsaturated hydraulic conductivity from the water retention functions, thereby assuming that the local parameters are also valid for this function. In addition, via the Warrick scaling parameter λ, information on global sub-grid scaling variance is given that enables modellers to improve dynamical downscaling of (regional) climate models or to perturb hydraulic parameters for model ensemble output generation. The present analysis is based on the ROSETTA PTF

  6. Secrets of Retention

    Science.gov (United States)

    Poliniak, Susan

    2012-01-01

    Recruiting students is one thing, but keeping them in a chorus, orchestra, or band is another. Although a music director has no control over some variables, there is much that can be done to help students to stay. Several experts share their advice on retention. One expert said a teacher's own attitude and classroom strategies may be two of the…

  7. Dissolved carbon and nitrogen leaching following variable logging-debris retention and competing-vegetation control in Douglas-fir plantations of western Oregon and Washington

    Science.gov (United States)

    Robert A. Slesak; Stephen H. Schoenholtz; Timothy B. Harrington; Brian D. Strahm

    2009-01-01

    We examined the effect of logging-debris retention and competing-vegetation control (CCC, initial or annual applications) on dissolved organic carbon (DOC), dissolved organic nitrogen, and nitrate-N leaching to determine the relative potential of these practices to contribute to soil C and N loss at two contrasting sites. Annual CVC resulted in higher soil water...

  8. Urinary Retention

    Science.gov (United States)

    ... 2011. [4] Mevcha A, Drake MJ. Etiology and management of urinary retention in women. Indian Journal of Urology. 2010;26(2):230–235. August ... 30 a.m. to 5 p.m. eastern time, M-F Follow Us NIH… Turning Discovery Into ... Disease Urologic Diseases Endocrine Diseases Diet & Nutrition ...

  9. QSRR modeling for the chromatographic retention behavior of some β-lactam antibiotics using forward and firefly variable selection algorithms coupled with multiple linear regression.

    Science.gov (United States)

    Fouad, Marwa A; Tolba, Enas H; El-Shal, Manal A; El Kerdawy, Ahmed M

    2018-05-11

    The justified continuous emerging of new β-lactam antibiotics provokes the need for developing suitable analytical methods that accelerate and facilitate their analysis. A face central composite experimental design was adopted using different levels of phosphate buffer pH, acetonitrile percentage at zero time and after 15 min in a gradient program to obtain the optimum chromatographic conditions for the elution of 31 β-lactam antibiotics. Retention factors were used as the target property to build two QSRR models utilizing the conventional forward selection and the advanced nature-inspired firefly algorithm for descriptor selection, coupled with multiple linear regression. The obtained models showed high performance in both internal and external validation indicating their robustness and predictive ability. Williams-Hotelling test and student's t-test showed that there is no statistical significant difference between the models' results. Y-randomization validation showed that the obtained models are due to significant correlation between the selected molecular descriptors and the analytes' chromatographic retention. These results indicate that the generated FS-MLR and FFA-MLR models are showing comparable quality on both the training and validation levels. They also gave comparable information about the molecular features that influence the retention behavior of β-lactams under the current chromatographic conditions. We can conclude that in some cases simple conventional feature selection algorithm can be used to generate robust and predictive models comparable to that are generated using advanced ones. Copyright © 2018 Elsevier B.V. All rights reserved.

  10. Investigating the biometric and physicochemical characteristics of freshly harvested Pacific white shrimp (Litopenaeus vannamei): a comparative approach.

    Science.gov (United States)

    Okpala, Charles Odilichukwu R; Bono, Gioacchino

    2016-03-15

    The practicality of biometrics of seafood cannot be overemphasized, particularly for competent authorities of the shrimp industry. However, there is a paucity of relevant literature on the relationship between biometric and physicochemical indices of freshly harvested shrimp. This work therefore investigated the relationship between biometric (standard length (SL), total weight (TW) and condition factor (CF)) and physicochemical (moisture content, pH, titratable acidity, water activity, water retention index, colour values and fracturability) characteristics of freshly harvested Pacific white shrimp (Litopenaeus vannamei) obtained from three different farms. The relationships between these parameters were determined using correlation and regression analyses. No significant correlation (P > 0.05) was found between the biometric and physicochemical indices of the sampled L. vannamei specimens. Possibly the lack of post-mortem and physical change(s) at day of harvest together with the absence of temporal variable may have collectively limited the degree of any significant correlation between biometric and physicochemical data points measured in this study. Although the TWs of freshly harvested L. vannamei shrimp resembled (P > 0.05), SL and CF differed significantly (P shrimp. Across the farms studied, however, the biometric data were comparable. To best knowledge, this is the first study to investigate the biometric and physicochemical properties of freshly harvested shrimp using a comparative approach, which is also applicable to other economically important aquaculture species. Overall, this work provides useful information for competent authorities/stakeholders of the fishery industry and serves as a baseline for preservative treatments. © 2015 Society of Chemical Industry.

  11. Manufacturing of Proteins and Antibodies: Chapter Downstream Processing Technologies : Harvest Operations.

    Science.gov (United States)

    Turner, Richard; Joseph, Adrian; Titchener-Hooker, Nigel; Bender, Jean

    2017-08-04

    Cell harvesting is the separation or retention of cells and cellular debris from the supernatant containing the target molecule Selection of harvest method strongly depends on the type of cells, mode of bioreactor operation, process scale, and characteristics of the product and cell culture fluid. Most traditional harvesting methods use some form of filtration, centrifugation, or a combination of both for cell separation and/or retention. Filtration methods include normal flow depth filtration and tangential flow microfiltration. The ability to scale down predictably the selected harvest method helps to ensure successful production and is critical for conducting small-scale characterization studies for confirming parameter targets and ranges. In this chapter we describe centrifugation and depth filtration harvesting methods, share strategies for harvest optimization, present recent developments in centrifugation scale-down models, and review alternative harvesting technologies.

  12. Piezoelectric energy harvesting with parametric uncertainty

    International Nuclear Information System (INIS)

    Ali, S F; Friswell, M I; Adhikari, S

    2010-01-01

    The design and analysis of energy harvesting devices is becoming increasing important in recent years. Most of the literature has focused on the deterministic analysis of these systems and the problem of uncertain parameters has received less attention. Energy harvesting devices exhibit parametric uncertainty due to errors in measurement, errors in modelling and variability in the parameters during manufacture. This paper investigates the effect of parametric uncertainty in the mechanical system on the harvested power, and derives approximate explicit formulae for the optimal electrical parameters that maximize the mean harvested power. The maximum of the mean harvested power decreases with increasing uncertainty, and the optimal frequency at which the maximum mean power occurs shifts. The effect of the parameter variance on the optimal electrical time constant and optimal coupling coefficient are reported. Monte Carlo based simulation results are used to further analyse the system under parametric uncertainty

  13. Soil Water Retention Curve

    Science.gov (United States)

    Johnson, L. E.; Kim, J.; Cifelli, R.; Chandra, C. V.

    2016-12-01

    Potential water retention, S, is one of parameters commonly used in hydrologic modeling for soil moisture accounting. Physically, S indicates total amount of water which can be stored in soil and is expressed in units of depth. S can be represented as a change of soil moisture content and in this context is commonly used to estimate direct runoff, especially in the Soil Conservation Service (SCS) curve number (CN) method. Generally, the lumped and the distributed hydrologic models can easily use the SCS-CN method to estimate direct runoff. Changes in potential water retention have been used in previous SCS-CN studies; however, these studies have focused on long-term hydrologic simulations where S is allowed to vary at the daily time scale. While useful for hydrologic events that span multiple days, the resolution is too coarse for short-term applications such as flash flood events where S may not recover its full potential. In this study, a new method for estimating a time-variable potential water retention at hourly time-scales is presented. The methodology is applied for the Napa River basin, California. The streamflow gage at St Helena, located in the upper reaches of the basin, is used as the control gage site to evaluate the model performance as it is has minimal influences by reservoirs and diversions. Rainfall events from 2011 to 2012 are used for estimating the event-based SCS CN to transfer to S. As a result, we have derived the potential water retention curve and it is classified into three sections depending on the relative change in S. The first is a negative slope section arising from the difference in the rate of moving water through the soil column, the second is a zero change section representing the initial recovery the potential water retention, and the third is a positive change section representing the full recovery of the potential water retention. Also, we found that the soil water moving has traffic jam within 24 hours after finished first

  14. Computer software to estimate timber harvesting system production, cost, and revenue

    Science.gov (United States)

    Dr. John E. Baumgras; Dr. Chris B. LeDoux

    1992-01-01

    Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

  15. Managing retention.

    Science.gov (United States)

    Carter, Tony

    2007-01-01

    To build this process it is necessary to consult customers for preferences, build familiarity and knowledge to build a relationship and conduct business in a customized fashion. The process takes every opportunity to build customer satisfaction with each customer contact. It is an important process to have, since customers today are more demanding, sophisticated, educated and comfortable speaking to the company as an equal (Belk, 2003). Customers have more customized expectations so they want to be reached as individuals (Raymond and Tanner, 1994). Also, a disproportionate search for new business is costly. The cost to cultivate new customers is more than maintaining existing customers (Cathcart, 1990). Other reasons that customer retention is necessary is because many unhappy customers will never buy again from a company that dissatisfied them and they will communicate their displeasure to other people. These dissatisfied customers may not even convey their displeasure but without saying anything just stop doing business with that company, which may keep them unaware for some time that there is any problem (Cathcart, 1990).

  16. Fog Harvesting with Harps.

    Science.gov (United States)

    Shi, Weiwei; Anderson, Mark J; Tulkoff, Joshua B; Kennedy, Brook S; Boreyko, Jonathan B

    2018-04-11

    Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture microscopic fog droplets, whereas fine meshes suffer from clogging issues. Here, we design and fabricate fog harvesters comprising an array of vertical wires, which we call "fog harps". Under controlled laboratory conditions, the fog-harvesting rates for fog harps with three different wire diameters were compared to conventional meshes of equivalent dimensions. As expected for the mesh structures, the mid-sized wires exhibited the largest fog collection rate, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog-harvesting rate continually increased with decreasing wire diameter for the fog harps due to efficient droplet shedding that prevented clogging. This resulted in a 3-fold enhancement in the fog-harvesting rate for the harp design compared to an equivalent mesh.

  17. Do biomass harvesting guidelines influence herpetofauna following harvests of logging residues for renewable energy?.

    Science.gov (United States)

    Fritts, Sarah; Moorman, Christopher; Grodsky, Steven; Hazel, Dennis; Homyack, Jessica; Farrell, Chris; Castleberry, Steven

    2016-04-01

    Forests are a major supplier of renewable energy; however, gleaning logging residues for use as woody biomass feedstock could negatively alter habitat for species dependent on downed wood. Biomass Harvesting Guidelines (BHGs) recommend retaining a portion of woody biomass on the forest floor following harvest. Despite BHGs being developed to help ensure ecological sustainability, their contribution to biodiversity has not been evaluated experimentally at operational scales. We compared herpetofauanal evenness, diversity, and richness and abundance of Anaxyrus terrestris and Gastrophryne carolinensis among six treatments that varied in volume and spatial arrangement of woody biomass retained after clearcutting loblolly pine (Pinus taeda) plantations in North Carolina, USA (n = 4), 2011-2014 and Georgia (n = 4), USA 2011-2013. Treatments were: (1) biomass harvest with no BHGs, (2) 15% retention with biomass clustered, (3) 15% retention with biomass dispersed, (4) 30% retention with biomass clustered, (5) 30% retention with biomass dispersed, and (6) no biomass harvest. We captured individuals with drift fence arrays and compared evenness, diversity, and richness metrics among treatments with repeated-measure, linear mixed-effects models. We determined predictors of A. terrestris and G. carolinensis abundances using a priori candidate N-mixture models with woody biomass volume, vegetation structure, and groundcover composition as covariates. We had 206 captures of 25 reptile species and 8710 captures of 17 amphibian species during 53690 trap nights. Herpetofauna diversity, evenness, and richness were similar among treatments. A. terrestris abundance was negatively related to volume of retained woody biomass in treatment units in North Carolina in 2013. G. carolinensis abundance was positively related with volume of retained woody debris in treatment units in Georgia in 2012. Other relationships between A. terrestris and G. carolinensis abundances and habitat metrics

  18. Optical Sensing of Weed Infestations at Harvest.

    Science.gov (United States)

    Barroso, Judit; McCallum, John; Long, Dan

    2017-10-19

    Kochia ( Kochia scoparia L.), Russian thistle ( Salsola tragus L.), and prickly lettuce ( Lactuca serriola L.) are economically important weeds infesting dryland wheat ( Triticum aestivum L.) production systems in the western United States. Those weeds produce most of their seeds post-harvest. The objectives of this study were to determine the ability of an optical sensor, installed for on-the-go measurement of grain protein concentration, to detect the presence of green plant matter in flowing grain and assess the potential usefulness of this information for mapping weeds at harvest. Spectra of the grain stream were recorded continuously at a rate of 0.33 Hz during harvest of two spring wheat fields of 1.9 and 5.4 ha. All readings were georeferenced using a Global Positioning System (GPS) receiver with 1 m positional accuracy. Chlorophyll of green plant matter was detectable in the red (638-710 nm) waveband. Maps of the chlorophyll signal from both fields showed an overall agreement of 78.1% with reference maps, one constructed prior to harvest and the other at harvest time, both based on visual evaluations of the three green weed species conducted by experts. Information on weed distributions at harvest may be useful for controlling post-harvest using variable rate technology for herbicide applications.

  19. 1970 Oregon timber harvest.

    Science.gov (United States)

    Brian R. Wall

    1971-01-01

    The 1970 Oregon timber harvest of 7.98 billion board feet was the lowest recorded since the recession year of 1961 when 7.41 billion board feet of timber was produced. The 1970 log production figure was 12.8 percent below the 1969 harvest, the second consecutive year of declining production in Oregon.

  20. Maple Sugar Harvesting/Wild Rice Harvesting.

    Science.gov (United States)

    Minneapolis Public Schools, MN.

    Comprised of two separate booklets, this resource unit assists elementary teachers in explaining how the Ojibwe people harvest maple sugar and wild rice. The first booklet explains the procedure of tapping the maple trees for sap, preparation for boiling the sap, and the three forms the sugar is made into (granulated, "molded," and…

  1. Electromagnetic energy harvester for harvesting acoustic energy

    Indian Academy of Sciences (India)

    Farid U Khan

    Acoustics; energy harvesting; electromagnetic; Helmholtz resonator; sound pressure level; suspended coil. ... WSNs, which are supposed to operate for longer period of time. However ... several ambient energies such as wind, thermal, vibration, and solar are ..... textile plants in Northern India with specific reference to noise.

  2. Bundling harvester; Nippukorjausharvesteri

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, K. [Eko-Log Oy, Kuopio (Finland)

    1996-12-31

    The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

  3. Bundling harvester; Nippukorjausharvesteri

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, K [Eko-Log Oy, Kuopio (Finland)

    1997-12-31

    The staring point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automatizing of the harvester, and automatized loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilization of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilized without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilization of wood-energy

  4. Conceptual design of a chickpea harvesting header

    Directory of Open Access Journals (Sweden)

    H. Golpira

    2013-07-01

    Full Text Available Interest in the development of stripper headers is growing owing to the excessive losses of combine harvesters and costs of manually harvesting for chickpeas. The design of a new concept can enhance the mechanized process for chickpea harvesting. A modified stripper platform was designed, in which passive fingers with V-shape slots removes the pods from the anchored plant. The floating platform was accompanied by a reel to complete the harvesting header. Black-box modeling was used to redesign the functional operators of the header followed by an investigation of the system behavior. Physical models of the platform and reel were modified to determine the crucial variables of the header arrangement during field trials. The slot width was fixed at 40 mm, finger length at 40 mm, keyhole diameter at 10 mm and entrance width at 6 mm; the batted reel at peripheral diameter of 700 mm and speed at 50 rpm. A tractor-mounted experimental harvester was built to evaluate the work quality of the stripper header. The performance of the prototype was tested with respect to losses and results confirmed the efficiency of the modified stripper header for chickpea harvesting. Furthermore, the header with a 1.4 m working width produced the spot work rates of 0.42 ha h-1.

  5. Energy harvesting for microsystems

    DEFF Research Database (Denmark)

    Xu, Ruichao

    The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has...... the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate...... power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 µm silicon layer and 10-30 µm screen printed...

  6. African Urban Harvest

    International Development Research Centre (IDRC) Digital Library (Canada)

    Urban Harvest, a system-wide initiative of the Consultative Group on Agricultural ...... and urban old, using criteria of population density, land availability, and the prevalence of crop ...... Contact between milk and containers or the environment;.

  7. Energy harvesting water vehicle

    KAUST Repository

    Singh, Devendra

    2018-01-01

    An efficient energy harvesting (EEH) water vehicle is disclosed. The base of the EEH water vehicle is fabricated with rolling cylindrical drums that can rotate freely in the same direction of the water medium. The drums reduce the drag

  8. The Effect of Urban Sprawls on Timber Harvesting

    Science.gov (United States)

    Stephen A. Barlow; Ian A Munn; David A. Cleaves; David L. Evans

    1998-01-01

    In Mississippi and Alabama, urban population growth is pushing development into rural areas. To study the impact of urbanization on timber harvesting, census and forest inventory data were combined in a geographic information system, and a logistic regression model was used to estimate the relationship between several variables and harvest probabilities....

  9. Economic analysis of water harvesting technologies in Ethiopia

    NARCIS (Netherlands)

    Wakeyo, M.B.

    2012-01-01

    Rainfall shortage and variability constrain crop production of smallholder farmers in Ethiopia and climate change may even aggravate this problem. An attractive method to mitigate this is water harvesting. This thesis examines the economic aspects of water harvesting by exploring optimal water

  10. Factors influencing reporting and harvest probabilities in North American geese

    Science.gov (United States)

    Zimmerman, G.S.; Moser, T.J.; Kendall, W.L.; Doherty, P.F.; White, Gary C.; Caswell, D.F.

    2009-01-01

    We assessed variation in reporting probabilities of standard bands among species, populations, harvest locations, and size classes of North American geese to enable estimation of unbiased harvest probabilities. We included reward (US10,20,30,50, or100) and control (0) banded geese from 16 recognized goose populations of 4 species: Canada (Branta canadensis), cackling (B. hutchinsii), Ross's (Chen rossii), and snow geese (C. caerulescens). We incorporated spatially explicit direct recoveries and live recaptures into a multinomial model to estimate reporting, harvest, and band-retention probabilities. We compared various models for estimating harvest probabilities at country (United States vs. Canada), flyway (5 administrative regions), and harvest area (i.e., flyways divided into northern and southern sections) scales. Mean reporting probability of standard bands was 0.73 (95 CI 0.690.77). Point estimates of reporting probabilities for goose populations or spatial units varied from 0.52 to 0.93, but confidence intervals for individual estimates overlapped and model selection indicated that models with species, population, or spatial effects were less parsimonious than those without these effects. Our estimates were similar to recently reported estimates for mallards (Anas platyrhynchos). We provide current harvest probability estimates for these populations using our direct measures of reporting probability, improving the accuracy of previous estimates obtained from recovery probabilities alone. Goose managers and researchers throughout North America can use our reporting probabilities to correct recovery probabilities estimated from standard banding operations for deriving spatially explicit harvest probabilities.

  11. Development of multi-functional combine harvester with grain harvesting and straw baling

    International Nuclear Information System (INIS)

    Tang, Z.; Li, Y.; Cheng, C.

    2017-01-01

    The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

  12. Development of multi-functional combine harvester with grain harvesting and straw baling

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Z.; Li, Y.; Cheng, C.

    2017-09-01

    The decomposition and burning of straw results in serious environmental pollution, and research is needed to improve strategies for straw collection to reduce pollution. This work presents an integrated design of multi-functional rice combine harvester that allows grain harvesting and straw baling. This multi-functional combine harvester could reduce the energy consumption required for rice harvesting and simplify the process of harvesting and baling. The transmission schematic, matching parameters and the rotation speed of threshing cylinder and square baler were designed and checked. Then the evaluation of grain threshing and straw baling were tested on a transverse threshing cylinders device tes rig and straw square bales compression test rig. The test results indicated that, with a feeding rate of 3.0 kg/s, the remaining straw flow rate at the discharge outlet was only 1.22 kg/s, which indicates a variable mass threshing process by the transverse threshing cylinder. Then the optimal diameter, length and rotating speed of multi-functional combine harvester transverse threshing cylinder were 554 mm, 1590 mm, and 850 r/min, respectively. The straw bale compression rotating speed of crank compression slider and piston was 95 r/min. Field trials by the multi-functional combine harvester formed bales with height×width×length of 40×50×54-63 cm, bale mass of 22.5 to 26.0 kg and bale density 206 to 216 kg/m3. This multi-functional combine harvester could be used for stem crops (such as rice, wheat and soybean) grain harvesting and straw square baling, which could reduce labor cost and power consumption.

  13. Water harvest via dewing.

    Science.gov (United States)

    Lee, Anna; Moon, Myoung-Woon; Lim, Hyuneui; Kim, Wan-Doo; Kim, Ho-Young

    2012-07-10

    Harvesting water from humid air via dewing can provide a viable solution to a water shortage problem where liquid-phase water is not available. Here we experimentally quantify the effects of wettability and geometry of the condensation substrate on the water harvest efficiency. Uniformly hydrophilic surfaces are found to exhibit higher rates of water condensation and collection than surfaces with lower wettability. This is in contrast to a fog basking method where the most efficient surface consists of hydrophilic islands surrounded by hydrophobic background. A thin drainage path in the lower portion of the condensation substrate is revealed to greatly enhance the water collection efficiency. The optimal surface conditions found in this work can be used to design a practical device that harvests water as its biological counterpart, a green tree frog, Litoria caerulea , does during the dry season in tropical northern Australia.

  14. Energy harvesting for microsystems

    Energy Technology Data Exchange (ETDEWEB)

    Ruichao Xu

    2012-05-15

    The purpose of this project is to design and fabricate piezoelectric energy harvesters based on integration of Pb(ZrxTi1-x)O3 (PZT) thick film technology and silicon microtechnology. The fabrication processes are carried out in close collaboration with Meggitt Sensing Systems (MSS) who has the unique expertise to screen print piezoelectric thick film layers, thus all screen printing steps are done by MSS while the silicon micromachining is carried out at Danchip facility at DTU. The presented energy harvesters are all based on using piezoelectric thick film operating in the 31-mode to generate power when strained. Three archetypes of the numerous fabricated energy harvesters will be presented in detail, they represent three major milestones in this project. The first energy harvester archetype has an unimorph cantilever beam, which consists of a 20 {mu}m silicon layer and 10-30 {mu}m screen printed PZT layer, anchored on a silicon frame at one end and attached to a silicon proof mass at the other. Electrodes will cover both side of the PZT layer, so the harvested energy can be collected electrically. The second archetype has a bimorph cantilever beam, which consists of two 15-35 {mu}m PZT layers, anchored on a silicon frame at the one end and attached to a silicon proof mass at the other. Electrodes are deposited below, between and above the two PZT layers. The root mean square (RMS) power output measured on this type of harvesters is as high as 37.1{mu}W at 1 g. The third archetype is similar to the first one, the screen printed PZT layer is replaced by a lead free piezoelectric material, (KxNa1-x)NbO3 (KNN). Some of the major challenges encountered during the development processes are bad adhesion, fragile structures and short circuiting through the PZT layer. All of which have being fully or partially solved in this project. The final energy harvesters are designed to be used in an energy harvester powered wireless sensing system. (Author)

  15. Combine Harvester Simulator

    DEFF Research Database (Denmark)

    Vilmann, Ole; Sørlie, James Arnold

    1999-01-01

    A simulator for training pilots in the operation of a modern high-tech combine harvester is presented. The new simulator application is based on DMI´s well-known DMS maritime simulator architecture. Two major challenges have been encountered in the development of the simulator: 1) interfacing the...

  16. Harvesting soil with potatoes

    DEFF Research Database (Denmark)

    Egelyng, Henrik

    2017-01-01

    Norwegian authorities demand soil leaving potato packing plants to be deposited as waste. Depositing soil from potato processing plants is associated with significant cost for Norwegian producers. Therefore CYCLE investigated potato soil harvesting from an innovation and socio-economic perspective....

  17. Designing A General Deep Web Harvester by Harvestability Factor

    NARCIS (Netherlands)

    Khelghati, Mohammadreza; van Keulen, Maurice; Hiemstra, Djoerd

    2014-01-01

    To make deep web data accessible, harvesters have a crucial role. Targeting different domains and websites enhances the need of a general-purpose harvester which can be applied to different settings and situations. To develop such a harvester, a large number of issues should be addressed. To have

  18. The Effect of Supplemental Instruction on Retention: A Bivariate Probit Model

    Science.gov (United States)

    Bowles, Tyler J.; Jones, Jason

    2004-01-01

    Single equation regression models have been used to test the effect of Supplemental Instruction (SI) on student retention. These models, however, fail to account for the two salient features of SI attendance and retention: (1) both SI attendance and retention are categorical variables, and (2) are jointly determined endogenous variables. Adopting…

  19. Magnetic Nanocomposite Cilia Energy Harvester

    KAUST Repository

    Khan, Mohammed Asadullah; Alfadhel, Ahmed; Kosel, Jü rgen

    2016-01-01

    An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized

  20. Cost, energy use and GHG emissions for forest biomass harvesting operations

    International Nuclear Information System (INIS)

    Zhang, Fengli; Johnson, Dana M.; Wang, Jinjiang; Yu, Chunxia

    2016-01-01

    For forest-based biomass to become a significant contribution to the United States' energy portfolio, harvesting operations must be physically feasible and economically viable. An assessment of cost, energy and greenhouse gas (GHG) emissions of forest biomass harvesting was conducted. The assessment differentiates harvesting systems by cut-to-length and whole tree; harvest types of 30%, 70%, and 100% cut; and forest types of hardwoods, softwoods, mixed hardwood/softwood, and softwood plantations. Harvesting cost models were developed for economic assessment and life cycle energy and emission assessment was applied to calculate energy and emissions for different harvesting scenarios, considering material and energy inputs (machinery, diesel, etc.) and outputs (GHG emissions) for each harvesting process (felling, forwarding/skidding, etc.). The developed harvesting cost models and the life cycle energy and emission assessment method were applied in Michigan, U.S. using information collected from different sources. A sensitivity analysis was performed for selected input variables for the harvesting operations in order to explore their relative importance. The results indicated that productivity had the largest impact on harvesting cost followed by machinery purchase price, yearly scheduled hours, and expected utilization. Productivity and fuel use, as well as fuel factors, are the most influential environmental impacts of harvesting operations. - Highlights: • Life cycle energy and emissions for forest biomass harvesting operations. • Harvesting cost models were developed for economic assessment. • Productivity had the largest impact on harvesting cost. • Fuel use contributes the most emissions while lubricants contribute the least.

  1. Urinary retention in women

    African Journals Online (AJOL)

    Urinary retention in women. Urinary retention in women is often transient and of no known cause. ... stones, constipation, urethral cancer, uterine fibroids ... present with abnormal bladder function secondary to ... (CT), magnetic resonance imaging (MRI) or myelography ... full blood count, urea, electrolytes and creatinine can ...

  2. Harvest Regulations and Implementation Uncertainty in Small Game Harvest Management

    Directory of Open Access Journals (Sweden)

    Pål F. Moa

    2017-09-01

    Full Text Available A main challenge in harvest management is to set policies that maximize the probability that management goals are met. While the management cycle includes multiple sources of uncertainty, only some of these has received considerable attention. Currently, there is a large gap in our knowledge about implemention of harvest regulations, and to which extent indirect control methods such as harvest regulations are actually able to regulate harvest in accordance with intended management objectives. In this perspective article, we first summarize and discuss hunting regulations currently used in management of grouse species (Tetraonidae in Europe and North America. Management models suggested for grouse are most often based on proportional harvest or threshold harvest principles. These models are all built on theoretical principles for sustainable harvesting, and provide in the end an estimate on a total allowable catch. However, implementation uncertainty is rarely examined in empirical or theoretical harvest studies, and few general findings have been reported. Nevertheless, circumstantial evidence suggest that many of the most popular regulations are acting depensatory so that harvest bag sizes is more limited in years (or areas where game density is high, contrary to general recommendations. A better understanding of the implementation uncertainty related to harvest regulations is crucial in order to establish sustainable management systems. We suggest that scenario tools like Management System Evaluation (MSE should be more frequently used to examine robustness of currently applied harvest regulations to such implementation uncertainty until more empirical evidence is available.

  3. An Interactionalist Analysis of Soldier Retention across Career Stages and Time

    National Research Council Canada - National Science Library

    Chen, Gilad; Ployhart, Robert E

    2006-01-01

    ...., work characteristics and social support), job attitudes, motivation, and retention. In general, it is proposed that job attitudes and motivation mediate the impact of ability and situational variables on retention outcomes...

  4. A Novel Ropes-DrivenWideband Piezoelectric Vibration Energy Harvester

    Directory of Open Access Journals (Sweden)

    Jinhui Zhang

    2016-12-01

    Full Text Available This paper presents a novel piezoelectric vibration energy harvester (PVEH in which a high-frequency generating beam (HFGB is driven by an array of low-frequency driving beams (LFDBs using ropes. Two mechanisms based on frequency upconversion and multimodal harvesting work together to broaden the frequency bandwidth of the proposed vibration energy harvester (VEH. The experimental results show that the output power of generating beam (GB remains unchanged with the increasing number of driving beams (DBs, compared with the traditional arrays of beams vibration energy harvester (AB-VEH, and the output power and bandwidth behavior can be adjusted by parameters such as acceleration, rope margin, and stiffness of LFDBs, which shows the potential to achieve unlimited wideband vibration energy-harvesting for a variable environment.

  5. Piezoelectric energy harvesting

    Energy Technology Data Exchange (ETDEWEB)

    Howells, Christopher A [Power Technology Branch, US Army, CERDEC, C2D, Ft. Belvoir, VA 22060-5816 (United States)

    2009-07-15

    Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed. (author)

  6. Piezoelectric energy harvesting

    International Nuclear Information System (INIS)

    Howells, Christopher A

    2009-01-01

    Piezoelectric materials can be used to convert oscillatory mechanical energy into electrical energy. This technology, together with innovative mechanical coupling designs, can form the basis for harvesting energy from mechanical motion. Piezoelectric energy can be harvested to convert walking motion from the human body into electrical power. Recently four proof-of-concept Heel Strike Units were developed where each unit is essentially a small electric generator that utilizes piezoelectric elements to convert mechanical motion into electrical power in the form factor of the heel of a boot. The results of the testing and evaluation and the performance of this small electric generator are presented. The generator's conversion of mechanical motion into electrical power, the processes it goes through to produce useable power and commercial applications of the Heel Strike electric generator are discussed.

  7. Restoration of harvested peatlands

    International Nuclear Information System (INIS)

    Saarmets, Tiit

    1999-01-01

    A short analysis of the main topics of the IPS Symposium Peatland Restoration and Reclamation, Duluth, Minnesota, USA, 1998 is given. It has been single-mindedly recommended in Estonia so far that harvested peatland surfaces should be levelled and outflows shut. But following these recommendations will lead to an unfounded formation of marshy areas with a very low growth of plants. The reclamation of harvested peatlands for agricultural purposes is expensive and there is no commercial need for agricultural land in today's Estonia now. In the author's opinion the foreflows and intermediate ditches should be left open which would favour the growth of the brushwood to grow later into the forest of commercial value. (author)

  8. Piezoelectric Energy Harvesting Solutions

    Science.gov (United States)

    Caliò, Renato; Rongala, Udaya Bhaskar; Camboni, Domenico; Milazzo, Mario; Stefanini, Cesare; de Petris, Gianluca; Oddo, Calogero Maria

    2014-01-01

    This paper reviews the state of the art in piezoelectric energy harvesting. It presents the basics of piezoelectricity and discusses materials choice. The work places emphasis on material operating modes and device configurations, from resonant to non-resonant devices and also to rotational solutions. The reviewed literature is compared based on power density and bandwidth. Lastly, the question of power conversion is addressed by reviewing various circuit solutions. PMID:24618725

  9. Harvesting contaminants from liquid

    Science.gov (United States)

    Simpson, John T.; Hunter, Scott R.

    2016-05-31

    Disclosed are examples of apparatuses for evaporative purification of a contaminated liquid. In each example, there is a vessel for storing the contaminated fluid. The vessel includes a surface coated with a layer of superhydrophobic material and the surface is at least partially in contact with the contaminated liquid. The contaminants do not adhere to the surface as the purified liquid evaporates, thus allowing the contaminants to be harvested.

  10. Terra Harvest software architecture

    Science.gov (United States)

    Humeniuk, Dave; Klawon, Kevin

    2012-06-01

    Under the Terra Harvest Program, the DIA has the objective of developing a universal Controller for the Unattended Ground Sensor (UGS) community. The mission is to define, implement, and thoroughly document an open architecture that universally supports UGS missions, integrating disparate systems, peripherals, etc. The Controller's inherent interoperability with numerous systems enables the integration of both legacy and future UGS System (UGSS) components, while the design's open architecture supports rapid third-party development to ensure operational readiness. The successful accomplishment of these objectives by the program's Phase 3b contractors is demonstrated via integration of the companies' respective plug-'n'-play contributions that include controllers, various peripherals, such as sensors, cameras, etc., and their associated software drivers. In order to independently validate the Terra Harvest architecture, L-3 Nova Engineering, along with its partner, the University of Dayton Research Institute, is developing the Terra Harvest Open Source Environment (THOSE), a Java Virtual Machine (JVM) running on an embedded Linux Operating System. The Use Cases on which the software is developed support the full range of UGS operational scenarios such as remote sensor triggering, image capture, and data exfiltration. The Team is additionally developing an ARM microprocessor-based evaluation platform that is both energy-efficient and operationally flexible. The paper describes the overall THOSE architecture, as well as the design decisions for some of the key software components. Development process for THOSE is discussed as well.

  11. Protocol and Practice in the Adaptive Management of Waterfowl Harvests

    Directory of Open Access Journals (Sweden)

    Fred Johnson

    1999-06-01

    Full Text Available Waterfowl harvest management in North America, for all its success, historically has had several shortcomings, including a lack of well-defined objectives, a failure to account for uncertain management outcomes, and inefficient use of harvest regulations to understand the effects of management. To address these and other concerns, the U.S. Fish and Wildlife Service began implementation of adaptive harvest management in 1995. Harvest policies are now developed using a Markov decision process in which there is an explicit accounting for uncontrolled environmental variation, partial controllability of harvest, and structural uncertainty in waterfowl population dynamics. Current policies are passively adaptive, in the sense that any reduction in structural uncertainty is an unplanned by-product of the regulatory process. A generalization of the Markov decision process permits the calculation of optimal actively adaptive policies, but it is not yet clear how state-specific harvest actions differ between passive and active approaches. The Markov decision process also provides managers the ability to explore optimal levels of aggregation or "management scale" for regulating harvests in a system that exhibits high temporal, spatial, and organizational variability. Progress in institutionalizing adaptive harvest management has been remarkable, but some managers still perceive the process as a panacea, while failing to appreciate the challenges presented by this more explicit and methodical approach to harvest regulation. Technical hurdles include the need to develop better linkages between population processes and the dynamics of landscapes, and to model the dynamics of structural uncertainty in a more comprehensive fashion. From an institutional perspective, agreement on how to value and allocate harvests continues to be elusive, and there is some evidence that waterfowl managers have overestimated the importance of achievement-oriented factors in

  12. Urinary retention in women.

    Science.gov (United States)

    Juma, Saad

    2014-07-01

    This review is a summary of the most pertinent published studies in the literature in the last 18 months that address cause, diagnosis, and management of urinary retention in women. Symptoms, uroflow, and pressure-flow studies have a low predictive value for and do not correlate with elevated postvoid residual urine (PVR). Anterior and posterior colporrhaphy do not cause de-novo bladder outlet obstruction in the majority of patients with elevated PVR, and the cause of elevated PVR may be other factors such as pain or anxiety causing abnormal relaxation of the pelvic floor and contributing to voiding difficulty. The risk of urinary retention in a future pregnancy after mid-urethral sling (MUS) is small. The risk of urinary tract infection and urinary retention after chemodenervation of the bladder with onabotulinumtoxin-A (100 IU) in patients with non-neurogenic urge incontinence is 33 and 5%, respectively. There is a lack of consensus among experts on the timing of sling takedown in the management of acute urinary retention following MUS procedures. There has been a significant progress in the understanding of the causation of urinary retention. Important areas that need further research (basic and clinical) are post-MUS and pelvic organ prolapse repair urinary retention and obstruction, and urinary retention owing to detrusor underactivity.

  13. A vibration energy harvesting device with bidirectional resonance frequency tunability

    International Nuclear Information System (INIS)

    Challa, Vinod R; Prasad, M G; Shi Yong; Fisher, Frank T

    2008-01-01

    Vibration energy harvesting is an attractive technique for potential powering of wireless sensors and low power devices. While the technique can be employed to harvest energy from vibrations and vibrating structures, a general requirement independent of the energy transfer mechanism is that the vibration energy harvesting device operate in resonance at the excitation frequency. Most energy harvesting devices developed to date are single resonance frequency based, and while recent efforts have been made to broaden the frequency range of energy harvesting devices, what is lacking is a robust tunable energy harvesting technique. In this paper, the design and testing of a resonance frequency tunable energy harvesting device using a magnetic force technique is presented. This technique enabled resonance tuning to ± 20% of the untuned resonant frequency. In particular, this magnetic-based approach enables either an increase or decrease in the tuned resonant frequency. A piezoelectric cantilever beam with a natural frequency of 26 Hz is used as the energy harvesting cantilever, which is successfully tuned over a frequency range of 22–32 Hz to enable a continuous power output 240–280 µW over the entire frequency range tested. A theoretical model using variable damping is presented, whose results agree closely with the experimental results. The magnetic force applied for resonance frequency tuning and its effect on damping and load resistance have been experimentally determined

  14. Recent Rates of Forest Harvest and Conversion in North America

    Science.gov (United States)

    Masek, Jeffrey G.; Cohen, Warren B.; Leckie, Donald; Wulder, Michael A.; Vargas, Rodrigo; de Jong, Ben; Healey, Sean; Law, Beverly; Birdsey, Richard; Houghton, R. A.; hide

    2011-01-01

    Incorporating ecological disturbance into biogeochemical models is critical for estimating current and future carbon stocks and fluxes. In particular, anthropogenic disturbances, such as forest conversion and wood harvest, strongly affect forest carbon dynamics within North America. This paper summarizes recent (2000.2008) rates of extraction, including both conversion and harvest, derived from national forest inventories for North America (the United States, Canada, and Mexico). During the 2000s, 6.1 million ha/yr were affected by harvest, another 1.0 million ha/yr were converted to other land uses through gross deforestation, and 0.4 million ha/yr were degraded. Thus about 1.0% of North America fs forests experienced some form of anthropogenic disturbance each year. However, due to harvest recovery, afforestation, and reforestation, the total forest area on the continent has been roughly stable during the decade. On average, about 110 m3 of roundwood volume was extracted per hectare harvested across the continent. Patterns of extraction vary among the three countries, with U.S. and Canadian activity dominated by partial and clear ]cut harvest, respectively, and activity in Mexico dominated by conversion (deforestation) for agriculture. Temporal trends in harvest and clearing may be affected by economic variables, technology, and forest policy decisions. While overall rates of extraction appear fairly stable in all three countries since the 1980s, harvest within the United States has shifted toward the southern United States and away from the Pacific Northwest.

  15. Breeding Bird Community Continues to Colonize Riparian Buffers Ten Years after Harvest.

    Directory of Open Access Journals (Sweden)

    Scott F Pearson

    Full Text Available Riparian ecosystems integrate aquatic and terrestrial communities and often contain unique assemblages of flora and fauna. Retention of forested buffers along riparian habitats is a commonly employed practice to reduce potential negative effects of land use on aquatic systems. However, very few studies have examined long-term population and community responses to buffers, leading to considerable uncertainty about effectiveness of this practice for achieving conservation and management outcomes. We examined short- (1-2 years and long-term (~10 years avian community responses (occupancy and abundance to riparian buffer prescriptions to clearcut logging silvicultural practices in the Pacific Northwest USA. We used a Before-After-Control-Impact experimental approach and temporally replicated point counts analyzed within a Bayesian framework. Our experimental design consisted of forested control sites with no harvest, sites with relatively narrow (~13 m forested buffers on each side of the stream, and sites with wider (~30 m and more variable width unharvested buffer. Buffer treatments exhibited a 31-44% increase in mean species richness in the post-harvest years, a pattern most evident 10 years post-harvest. Post-harvest, species turnover was much higher on both treatments (63-74% relative to the controls (29%. We did not find evidence of local extinction for any species but found strong evidence (no overlap in 95% credible intervals for an increase in site occupancy on both Narrow (short-term: 7%; long-term 29% and Wide buffers (short-term: 21%; long-term 93% relative to controls after harvest. We did not find a treatment effect on total avian abundance. When assessing relationships between buffer width and site level abundance of four riparian specialists, we did not find strong evidence of reduced abundance in Narrow or Wide buffers. Silviculture regulations in this region dictate average buffer widths on small and large permanent streams that

  16. Background or Experience? Using Logistic Regression to Predict College Retention

    Science.gov (United States)

    Synco, Tracee M.

    2012-01-01

    Tinto, Astin and countless others have researched the retention and attrition of students from college for more than thirty years. However, the six year graduation rate for all first-time full-time freshmen for the 2002 cohort was 57%. This study sought to determine the retention variables that predicted continued enrollment of entering freshmen…

  17. Drug Retention Times

    Energy Technology Data Exchange (ETDEWEB)

    Center for Human Reliability Studies

    2007-05-01

    The purpose of this monograph is to provide information on drug retention times in the human body. The information provided is based on plausible illegal drug use activities that might be engaged in by a recreational drug user.

  18. Liquid Effluent Retention Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Liquid Effluent Retention Facility (LERF) is located in the central part of the Hanford Site. LERF is permitted by the State of Washington and has three liquid...

  19. Differential fat harvesting

    Directory of Open Access Journals (Sweden)

    Sebastian Torres Farr

    2014-12-01

    Full Text Available Aim: Volume replacement with fillers is regularly performed with the use of diverse volumetric materials to correct different structures around the face, depending on the volume enhancement required and the thickness of the soft tissue envelope. Differential fat harvesting and posterior grafting is performed to place the correct fat parcel size for each target area, expanding the potential applications of fat. Methods: Sixty patients consecutively recruited on a first come basis undergone a facial fat grafting procedure, in private practice setting between March 2012 and October 2013. Fat grafting quantity and quality was predicted for each case. Differential harvesting was performed, with 2 fat parcels size. Processing was performed through washing. Fat infiltration was carried out through small cannulas or needles depending on the treated area. Outcomes were analysed both by the physicians and the patients at 7 days, 1 month, 3 months and 6 months through a perceived satisfaction questionnaire. Parameters considered were downtime or discomfort, skin benefits, volume restoration, reabsorption rate estimated and overall improvement. Results: Full facial differential fat grafting procedure lasted an average of 1.5-2.5 h. Average downtime was 3-4 days. Follow-up was performed to a minimum of 6 months. Both patient and physician overall satisfaction rates were mostly excellent. Adverse events like lumps or irregularities were not encountered. Conclusion: Differential fat harvesting and posterior grafting is a valid alternative, to expand the repertoire of fat use, allow a more homogeneous effect, reduce the potential complications, speed up the process, improve graft survival, and to enhance overall aesthetic outcome.

  20. Nanostructured piezoelectric energy harvesters

    CERN Document Server

    Briscoe, Joe

    2014-01-01

    This book covers a range of devices that use piezoelectricity to convert mechanical deformation into electrical energy and relates their output capabilities to a range of potential applications. Starting with a description of the fundamental principles and properties of piezo- and ferroelectric materials, where applications of bulk materials are well established, the book shows how nanostructures of these materials are being developed for energy harvesting applications. The authors show how a nanostructured device can be produced, and put in context some of the approaches that are being invest

  1. Micro energy harvesting

    CERN Document Server

    Briand, Danick; Roundy, Shad

    2015-01-01

    With its inclusion of the fundamentals, systems and applications, this reference provides readers with the basics of micro energy conversion along with expert knowledge on system electronics and real-life microdevices. The authors address different aspects of energy harvesting at the micro scale with a focus on miniaturized and microfabricated devices. Along the way they provide an overview of the field by compiling knowledge on the design, materials development, device realization and aspects of system integration, covering emerging technologies, as well as applications in power management, e

  2. Thermoelectrics and its energy harvesting

    National Research Council Canada - National Science Library

    Rowe, David Michael

    2012-01-01

    .... It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material...

  3. Stand, Harvest, and Equipment Interactions in Simulated Harvesting Prescriptions

    Science.gov (United States)

    Jingxin Wang; W. Dale Greene; Bryce J. Stokes

    1998-01-01

    We evaluated potential interactions of stand type, harvesting method, and equipment in an experiment using interactive simulation. We examined three felling methods (chain saw, feller-buncher, harvester) and two extraction methods (grapple skidder and forwarder) performing clearcuts, sheltenvood cuts, and single-tree selection cuts in both an uneven-aged natural stand...

  4. Microalgae harvesting techniques: A review.

    Science.gov (United States)

    Singh, Gulab; Patidar, S K

    2018-07-01

    Microalgae with wide range of commercial applications have attracted a lot of attention of the researchers in the last few decades. However, microalgae utilization is not economically sustainable due to high cost of harvesting. A wide range of solid - liquid separation techniques are available for microalgae harvesting. The techniques include coagulation and flocculation, flotation, centrifugation and filtration or a combination of various techniques. Despite the importance of harvesting to the economics and energy balance, there is no universal harvesting technique for microalgae. Therefore, this review focuses on assessing technical, economical and application potential of various harvesting techniques so as to allow selection of an appropriate technology for cost effectively harvesting of microalgae from their culture medium. Various harvesting and concentrating techniques of microalgae were reviewed to suggest order of suitability of the techniques for four main microalgae applications i.e biofuel, human and animal food, high valued products, and water quality restoration. For deciding the order of suitability, a comparative analysis of various harvesting techniques based on the six common criterions (i.e biomass quality, cost, biomass quantity, processing time, species specific and toxicity) has been done. Based on the order of various techniques vis-a-vis various criteria and preferred order of criteria for various applications, order of suitability of harvesting techniques for various applications has been decided. Among various harvesting techniques, coagulation and flocculation, centrifugation and filtration were found to be most suitable for considered applications. These techniques may be used alone or in combination for increasing the harvesting efficiency. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. Energy harvesting water vehicle

    KAUST Repository

    Singh, Devendra

    2018-01-04

    An efficient energy harvesting (EEH) water vehicle is disclosed. The base of the EEH water vehicle is fabricated with rolling cylindrical drums that can rotate freely in the same direction of the water medium. The drums reduce the drag at the vehicle-water interface. This reduction in drag corresponds to an increase in speed and/or greater fuel efficiency. The mechanical energy of the rolling cylindrical drums is also transformed into electrical energy using an electricity producing device, such as a dynamo or an alternator. Thus, the efficiency of the vehicle is enhanced in two parallel modes: from the reduction in drag at the vehicle-water interface, and from capturing power from the rotational motion of the drums.

  6. An economic assessment of local farm multi-purpose surface water retention systems in a Canadian Prairie setting

    Science.gov (United States)

    Berry, Pamela; Yassin, Fuad; Belcher, Kenneth; Lindenschmidt, Karl-Erich

    2017-12-01

    There is a need to explore more sustainable approaches to water management on the Canadian Prairies. Retention pond installation schemes designed to capture surface water may be a viable option that would reduce water stress during drought periods by providing water for irrigation. The retention systems would serve to capture excess spring runoff and extreme rainfall events, reducing flood potential downstream. Additionally, retention ponds may be used for biomass production and nutrient retention. The purpose of this research was to investigate the economic viability of adopting local farm surface water retention systems as a strategic water management strategy. A retention pond was analyzed using a dynamic simulation model to predict its storage capacity, installation and upkeep cost, and economic advantage to farmers when used for irrigation. While irrigation application increased crop revenue, the cost of irrigation and reservoir infrastructure and installation costs were too high for the farmer to experience a positive net revenue. Farmers who harvest cattails from retention systems for biomass and available carbon offset credits can gain 642.70/hectare of harvestable cattail/year. Cattail harvest also removes phosphorus and nitrogen, providing a monetized impact of 7014/hectare of harvestable cattail/year. The removal of phosphorus, nitrogen, carbon, and avoided flooding damages of the retention basin itself provide an additional 17,730-18,470/hectare of retention system/year. The recommended use of retention systems is for avoided flood damages, nutrient retention, and biomass production. The revenue gained from these functions can support farmers wanting to invest in irrigation while providing economic and environmental benefits to the region.

  7. Injuries from Non-Retention in Gillnet Fisheries Suppress Reproductive Maturation in Escaped Fish

    OpenAIRE

    Baker, Matthew R.; Swanson, Penny; Young, Graham

    2013-01-01

    Exploitation of fisheries resources has unintended consequences, not only in the bycatch and discard of non-target organisms, but also in damage to targeted fish that are injured by gear but not landed (non-retention). Delayed mortality due to non-retention represents lost reproductive potential in exploited stocks, while not contributing to harvest. Our study examined the physiological mechanisms by which delayed mortality occurs and the extent to which injuries related to disentanglement fr...

  8. Power harvesting in helicopter rotorblades

    NARCIS (Netherlands)

    de Jong, Pieter; de Boer, Andries; Loendersloot, Richard; van der Hoogt, Peter

    2010-01-01

    Current power harvesting research has focused on bending beams and determining power output under a given excitation. For the European CleanSky – Green Rotor Craft project a tool is being developed which optimizes the piezoelectric material and placement thereof for power harvesting. It focuses on

  9. Radio Frequency Energy Harvesting Sources

    Directory of Open Access Journals (Sweden)

    Action NECHIBVUTE

    2017-12-01

    Full Text Available This radio frequency (RF energy harvesting is an emerging technology and research area that promises to produce energy to run low-power wireless devices. The great interest that has recently been paid to RF harvesting is predominantly driven by the great progress in both wireless communication systems and broadcasting technologies that have availed a lot of freely propagating ambient RF energy. The principle aim of an RF energy harvesting system is to convert the received ambient RF energy into usable DC power. This paper presents a state of the art concise review of RF energy harvesting sources for low power applications, and also discusses open research questions and future research directions on ambient RF energy harvesting.

  10. Efficiency assessment of runoff harvesting techniques using a 3D coupled surface-subsurface hydrological model

    International Nuclear Information System (INIS)

    Verbist, K.; Cronelis, W. M.; McLaren, R.; Gabriels, D.; Soto, G.

    2009-01-01

    In arid and semi-arid zones runoff harvesting techniques are often applied to increase the water retention and infiltration on steep slopes. Additionally, they act as an erosion control measure to reduce land degradation hazards. Both in literature and in the field, a large variety of runoff collecting systems are found, as well as large variations in design and dimensions. Therefore, detailed measurements were performed on a semi-arid slope in central Chile to allow identification of the effect of a simple water harvesting technique on soil water availability. For this purpose, twenty two TDR-probes were installed and were monitored continuously during and after a simulated rainfall event. These data were used to calibrate the 3D distributed flow model HydroGeoSphere, to assess the runoff components and soil water retention as influenced by the water harvesting technique, both under simulated and natural rainfall conditions. (Author) 6 refs.

  11. Implicit memory. Retention without remembering.

    Science.gov (United States)

    Roediger, H L

    1990-09-01

    Explicit measures of human memory, such as recall or recognition, reflect conscious recollection of the past. Implicit tests of retention measure transfer (or priming) from past experience on tasks that do not require conscious recollection of recent experiences for their performance. The article reviews research on the relation between explicit and implicit memory. The evidence points to substantial differences between standard explicit and implicit tests, because many variables create dissociations between these tests. For example, although pictures are remembered better than words on explicit tests, words produce more priming than do pictures on several implicit tests. These dissociations may implicate different memory systems that subserve distinct memorial functions, but the present argument is that many dissociations can be understood by appealing to general principles that apply to both explicit and implicit tests. Phenomena studied under the rubric of implicit memory may have important implications in many other fields, including social cognition, problem solving, and cognitive development.

  12. Harvesting a short rotation forest

    Energy Technology Data Exchange (ETDEWEB)

    Perttu, K L [ed.

    1984-12-01

    Willow and Sallow, considered of great interest for Swedish conditions, present new problems in harvesting. Traditional logging techniques offer few elements of equipment or methods. Light whips may be comminuted to a bulk product, easy to handle, difficult to store, requiring a hot logging system - and requiring a heavy, powerful harvester. Aggregating the material introduces an intermediate wood-fuel unit, suitable for storing, transport and infeed into any comminuter. If the harvester produced billets it would require less energy for its operation and it may be used for other purposes such as pre-commercial thinning or row thinning during the growing season. A few groups of designers have worked on analyses of requirements and possible solutions. Test rigs for severing and bundling were built and evaluated. Public funding was made available for design work on harvesters. Five groups were selected to produce layout designs of large and small harvesters. An evaluation procedure was performed, leading to selection of two concepts, slightly reworked from their original shapes. One is a large self-propelled front-sutting harvester, the other is a harvesting unit to be mounted on a suitable farm tractor. With 3 refs.

  13. A bountiful spring harvest

    CERN Multimedia

    2013-01-01

    Although we recently put the clocks forward and spring has officially begun, the view from my window looks more autumnal – befitting of the season of mists and mellow fruitfulness, rather than that of sowing seeds for the future. Which, in a way is appropriate. With the LHC paused, we are reaping a kind of harvest in the form of recognition for our efforts.   Two weeks ago, I was in Edinburgh, on behalf of everyone at CERN, to collect the Edinburgh medal, which we shared with Peter Higgs. I particularly like the citation for this honour: “The Edinburgh Medal is awarded each year to men and women of science and technology whose professional achievements are judged to have made a significant contribution to the understanding and well-being of humanity.” I like this, because it underlines a fact that needs to be shouted louder – that fundamental science does more than build the sum of human knowledge, it is also the foundation of human well-being. A few d...

  14. Mechanical harvesting of pumpkin seeds

    OpenAIRE

    Sito, Stjepan; Ivančan, Stjepan; Barković, Edi; Mucalo, Ana

    2009-01-01

    One of the key problems in production technology of pumpkin seed for oil production is mechanized harvesting and losses of seed during mechanical harvesting. The losses of pumpkin seed during mechanical harvesting at peripheral velocity of 1.57 m/s (optimally adjusted machine) were 4.4% for Gleisdorf species, 5.2% for Slovenska species and 7.8% for pumpkin with husk. The higher average losses of pumpkin seed with husk were caused by tight connection of seed and pumpkin fruit.

  15. Retention of Emergency Care Knowledge.

    Science.gov (United States)

    Burckes, Mardie E.; Shao, Kung Ping Pam

    1984-01-01

    Data on the emergency care knowledge of college students were measured by a pretest, posttest, and retention test. A high relationship was found between students' posttest scores and retention test scores. Findings are discussed. (Author/DF)

  16. Ecosystem Responses to Partial Harvesting in Eastern Boreal Mixedwood Stands

    Directory of Open Access Journals (Sweden)

    Brian D. Harvey

    2013-05-01

    Full Text Available Partial harvesting has been proposed as a key aspect to implementing ecosystem management in the Canadian boreal forest. We report on a replicated experiment located in boreal mixedwoods of Northwestern Quebec. In the winter of 2000–2001, two partial harvesting treatments, one using a dispersed pattern, and a second, which created a (400 m2 gap pattern, were applied to a 90-year-old aspen-dominated mixed stand. The design also included a clear cut and a control. Over the course of the following eight years, live tree, coarse woody debris, regeneration and ground beetles were inventoried at variable intervals. Our results indicate that all harvesting treatments created conditions favorable to balsam fir (Abies balsamea sapling growth and trembling aspen (Populus tremuloides sapling recruitment. However, balsam fir and trembling aspen regeneration and ground beetles response to gap cuts were closer to patterns observed in clear cuts than in dispersed harvesting. The underlying reasons for these differing patterns can be linked to factors associated with the contrasting light regimes created by the two partial harvesting treatments. The study confirms that partially harvesting is an ecologically sound approach in boreal mixedwoods and could contribute to maintaining the distribution of stand ages at the landscape level.

  17. Controlling Light Harvesting with Light

    NARCIS (Netherlands)

    Gwizdala, M.S.; Berera, R.; Kirilovsky, D.; van Grondelle, R.; Kruger, T.P.J.

    2016-01-01

    When exposed to intense sunlight, all organisms performing oxygenic photosynthesis implement various photoprotective strategies to prevent potentially lethal photodamage. The rapidly responding photoprotective mechanisms, occurring in the light-harvesting pigment-protein antennae, take effect within

  18. Magnetic Nanocomposite Cilia Energy Harvester

    KAUST Repository

    Khan, Mohammed Asadullah

    2016-02-11

    An energy harvester capable of converting low frequency vibrations into electrical energy is presented. The operating principle, fabrication process and output characteristics at different frequencies are discussed. The harvester is realized by fabricating an array of polydimethylsiloxane (PDMS) - iron nanowire nanocomposite cilia on a planar coil array. Each coil element consists of 14 turns and occupies an area of 600 μm x 600μm. The cilia are arranged in a 12x5 array and each cilium is 250 μm wide and 2 mm long. The magnetic characteristics of the fabricated cilia indicate that the nanowires are well aligned inside of the nanocomposite, increasing the efficiency of energy harvesting. The energy harvester occupies an area of 66.96 mm2 and produces an output r.m.s voltage of 206.47μV, when excited by a 40 Hz vibration of 1 mm amplitude.

  19. Energy harvesting on highway bridges.

    Science.gov (United States)

    2011-01-01

    A concept for harvesting energy from the traffic-induced loadings on a highway bridge using piezoelectric : materials to generate electricity was explored through the prototype stage. A total of sixteen lead-zirconate : titanate (PZT) Type 5A piezoel...

  20. Selection harvests in Amazonian rainforests: long-term impacts on soil properties

    Science.gov (United States)

    K.L. McNabb; M.S. Miller; B.G. Lockaby; B.J. Stokes; R.G. Clawson; John A. Stanturf; J.N.M. Silva

    1997-01-01

    Surface soil properties were compared among disturbance classes associated with a single-tree selection harvest study installed in 1979 in the Brazilian Amazon. Response variables included pH, total N, total organic C, extractable P, exchangeable K, Ca, Mg, and bulk density. In general, concentrations of all elements displayed residual effects 16 years after harvests...

  1. Enhancing retention of partial dentures using elastomeric retention rings

    Directory of Open Access Journals (Sweden)

    Kakkirala Revathi

    2015-01-01

    Full Text Available This report presents an alternative method for the retention of partial dentures that relies on the engagement of tooth undercuts by a lining material. The lab procedures are also presented. A new maxillary and mandibular acrylic partial dentures were fabricated using elastomeric retention technique for a partially dentate patient. A partially dentate man reported difficulty in retaining his upper removable partial denture (RPD. The maxillary RPD was designed utilizing elastomeric retention technique. During follow-up, it was necessary to replace the retention rings due to wear. The replacement of the retention rings, in this case, was done through a chairside reline technique. Elastomeric retention technique provides exceptionally good retention can be indicated to stabilize, cushion, splint periodontally involved teeth, no enough undercut for clasps, eliminate extractions, single or isolated teeth.

  2. Harvester operator learnig efficiency analysis

    OpenAIRE

    Malovrh, Špela; Košir, Boštjan; Krč, Janez

    2004-01-01

    The article considers the possibilities of training future harvester operators. The course of learning with a simulator is described and analysed on the first such example in Slovenia. The times of individual processes are measured in two candidates. The paper describes the operation of a learning simulator for work on the harvester Timberjack 1270 D and the proceedings of aone-week course. A comparison between candidates regarding the consumption oftime and number of damages to the virtual m...

  3. Frequency adjustable MEMS vibration energy harvester

    Science.gov (United States)

    Podder, P.; Constantinou, P.; Amann, A.; Roy, S.

    2016-10-01

    Ambient mechanical vibrations offer an attractive solution for powering the wireless sensor nodes of the emerging “Internet-of-Things”. However, the wide-ranging variability of the ambient vibration frequencies pose a significant challenge to the efficient transduction of vibration into usable electrical energy. This work reports the development of a MEMS electromagnetic vibration energy harvester where the resonance frequency of the oscillator can be adjusted or tuned to adapt to the ambient vibrational frequency. Micro-fabricated silicon spring and double layer planar micro-coils along with sintered NdFeB micro-magnets are used to construct the electromagnetic transduction mechanism. Furthermore, another NdFeB magnet is adjustably assembled to induce variable magnetic interaction with the transducing magnet, leading to significant change in the spring stiffness and resonance frequency. Finite element analysis and numerical simulations exhibit substantial frequency tuning range (25% of natural resonance frequency) by appropriate adjustment of the repulsive magnetic interaction between the tuning and transducing magnet pair. This demonstrated method of frequency adjustment or tuning have potential applications in other MEMS vibration energy harvesters and micromechanical oscillators.

  4. Frequency adjustable MEMS vibration energy harvester

    International Nuclear Information System (INIS)

    Podder, P; Constantinou, P; Roy, S; Amann, A

    2016-01-01

    Ambient mechanical vibrations offer an attractive solution for powering the wireless sensor nodes of the emerging “Internet-of-Things”. However, the wide-ranging variability of the ambient vibration frequencies pose a significant challenge to the efficient transduction of vibration into usable electrical energy. This work reports the development of a MEMS electromagnetic vibration energy harvester where the resonance frequency of the oscillator can be adjusted or tuned to adapt to the ambient vibrational frequency. Micro-fabricated silicon spring and double layer planar micro-coils along with sintered NdFeB micro-magnets are used to construct the electromagnetic transduction mechanism. Furthermore, another NdFeB magnet is adjustably assembled to induce variable magnetic interaction with the transducing magnet, leading to significant change in the spring stiffness and resonance frequency. Finite element analysis and numerical simulations exhibit substantial frequency tuning range (25% of natural resonance frequency) by appropriate adjustment of the repulsive magnetic interaction between the tuning and transducing magnet pair. This demonstrated method of frequency adjustment or tuning have potential applications in other MEMS vibration energy harvesters and micromechanical oscillators. (paper)

  5. Performance evaluation of prototype mechanical cassava harvester ...

    African Journals Online (AJOL)

    Large-scale cassava harvesting, especially during the dry season, is a major constraint to its industrial demand and commercial production. Manual harvesting is slow and ... Results from field trials showed prototype harvesters weighing 268 – 310 kg can achieve optimum performance on ridged landforms. When harvested ...

  6. Retention of gaseous isotopes

    International Nuclear Information System (INIS)

    Yarbro, O.O.; Mailen, J.C.; Stephenson, M.J.

    1977-01-01

    Retention of gaseous fission products during fuel reprocessing has, in the past, been limited to a modest retention of 131 I when processing fuels decayed less than about 180 days. The projected rapid growth of the nuclear power industry along with a desire to minimize environmental effects is leading to the reassessment of requirements for retention of gaseous fission products, including 131 I, 129 I, 85 Kr, 3 H, and 14 C. Starting in the late 1960s, a significant part of the LMFBR reprocessing development program has been devoted to understanding the behavior of gaseous fission products in plant process and effluent streams and the development of advanced systems for their removal. Systems for iodine control include methods for evolving up to 99% of the iodine from dissolver solutions to minimize its introduction and distribution throughout downstream equipment. An aqueous scrubbing system (Iodox) using 20 M HNO 3 as the scrubbing media effectively removes all significant iodine forms from off-gas streams while handling the kilogram quantities of iodine present in head-end and dissolver off-gas streams. Silver zeolite is very effective for removing iodine forms at low concentration from the larger-volume plant off-gas streams. Removal of iodine from plant liquid effluents by solid sorbents either prior to or following final vaporization appears feasible. Krypton is effectively released during dissolution and can be removed from the relatively small volume head-end and dissolver off-gas stream. Two methods appear applicable for removal and concentration of krypton: (1) selective absorption in fluorocarbons, and (2) cryogenic absorption in liquid nitrogen. The fluorocarbon absorption process appears to be rather tolerant of the normal contaminants (H 2 O, CO 2 , NOsub(x), and organics) present in typical reprocessing plant off-gas whereas the cryogenic system requires an extensive feed gas pretreatment system. Retention of tritium in a reprocessing plant is

  7. Nitrogen Saturation in Highly Retentive Watersheds?

    Science.gov (United States)

    Daley, M. L.; McDowell, W. H.

    2009-12-01

    Watershed managers are often concerned with minimizing the amount of N delivered to N-limited estuaries and coastal zones. A major concern is that watersheds might reach N saturation, in which N delivered to coastal zones increases due to declines in the efficiency of N retention despite constant or even reduced N inputs. We have quantified long-term changes in N inputs (atmospheric deposition, imported food and agricultural fertilizers), outputs (N concentration and export) and retention in the urbanizing Lamprey River watershed in coastal NH. Overall, the Lamprey watershed is 70% forested, receives about 13.5 kg N/ha/yr and has a high rate of annual N retention (85%). Atmospheric deposition (8.7 kg/ha/yr) is the largest N input to the watershed. Of the 2.2 kg N/ha/yr exported in the Lamprey River, dissolved organic N (DON) is the dominant form (50% of total) and it varies spatially throughout the watershed with wetland cover. Nitrate accounts for 30% of the N exported, shows a statistically significant increase from 1999 to 2009, and its spatial variability in both concentration and export is related to human population density. In sub-basins throughout the Lamprey, inorganic N retention is high (85-99%), but the efficiency of N retention declines sharply with increased human population density and associated anthropogenic N inputs. N assimilation in the vegetation, denitrification to the atmosphere and storage in the groundwater pool could all be important contributors to the current high rates of N retention. The temporal and spatial patterns that we have observed in nitrate concentration and export are driven by increases in N inputs and impervious surfaces over time, but the declining efficiency of N retention suggests that the watershed may also be reaching N saturation. The downstream receiving estuary, Great Bay, already suffers from low dissolved oxygen levels and eelgrass loss in part due to N loading from the Lamprey watershed. Targeting and reducing

  8. Environmental and socioeconomic benefits and limitations of water harvesting techniques in semiarid regions

    Science.gov (United States)

    Díaz-Pereira, Elvira; Asunción Romero-Díaz, María; de Vente, Joris

    2016-04-01

    Under climate change, sustainable management of soil and water resources is increasingly important, especially in rainfed agroecosystems of semiarid environments. Water harvesting refers to a range of techniques for the collection and management of flood or rainwater for domestic and agricultural use and for water retention in natural ecosystems. Water harvesting represents a good example of sustainable management of water resources that contribute to water and food security. However, there are often environmental and socioeconomic constraints for implementation of water harvesting techniques, so each condition asks for a specific solution. Here we aim to highlight the environmental and socioeconomic benefits, requirements and limitations of different water harvesting techniques and to characterize their implications for provisioning, regulating, supporting, and cultural ecosystem services. We reviewed 62 water harvesting techniques for semiarid regions extracted from the WOCAT (World Overview of Conservation Approaches and Technologies) database. We discuss aspects related to: i) human and environmental characteristics, ii) cost-benefit ratio during implementation and maintenance phases, iii) socioeconomic and environmental impacts at local and regional scales, and, iv) impacts on ecosystem services. Our review reveals that water harvesting represents very diverse methods of collecting and managing floodwaters and surface runoff. We grouped techniques as 'floodwater harvesting', 'macro-catchment water harvesting', 'micro-catchment water harvesting', and 'rooftop and courtyard' water harvesting. Almost half of all technologies originates from traditional knowledge. The implementation of water harvesting is generally positive on the short-term, to very positive on the long-term, while its maintenance is very positive at short and long-term. However, perception depends on the type of water harvesting and local conditions. Most relevant socioeconomic benefits from

  9. Spatial Characteristics of Edible Wild Fern Harvesting in Mountainous Villages in Northeastern Japan Using GPS Tracks

    Directory of Open Access Journals (Sweden)

    Toshiya Matsuura

    2014-02-01

    Full Text Available Wild plants in forests provide valuable living resources for rural communities. The location where local people harvest various species is important to the wise use of forest ecosystem services. Using global positioning system (GPS tracking of harvesters’ activities as well as geographic information system (GIS and a generalized linear model (GLM, this study analyzed the spatial differences among harvesting sites of three popular edible ferns, i.e., ostrich fern (Matteuccia struthiopteris, bracken (Pteridium aquilinum, and royal fern (Osmunda japonica, in mountainous villages of Northeastern Japan. The explanatory variables used were vegetation classes, terrain features, and proximity to roadways. The GLM yielded clear differences in harvesting sites among species that were affected by both the species’ ecological characteristics and human behavior. Ostrich fern was harvested mainly in canopy openings along valley floors, whereas royal fern harvest sites were frequently located in snow avalanche scrublands. Bracken was mainly harvested in deforested areas or young conifer plantations. Whereas ostrich fern and bracken harvest sites were restricted by the accessibility from roadways, this was not the case for royal fern. Potential harvest sites of ferns were estimated with the highest value for bracken. Our results suggest that local harvesters seriously consider various natural and anthropogenic factors to maintain effective and sustainable harvesting.

  10. heteroHarvest: Harvesting Information from Heterogeneous Sources

    DEFF Research Database (Denmark)

    Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

    2011-01-01

    The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversity...... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. Finally we describe the results of experimental evaluation. The results are found promising with an overall error rate equal to 6.5% across heterogeneous formats....

  11. A Hip Implant Energy Harvester

    Science.gov (United States)

    Pancharoen, K.; Zhu, D.; Beeby, S. P.

    2014-11-01

    This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω.

  12. A Hip Implant Energy Harvester

    International Nuclear Information System (INIS)

    Pancharoen, K; Zhu, D; Beeby, S P

    2014-01-01

    This paper presents a kinetic energy harvester designed to be embedded in a hip implant which aims to operate at a low frequency associated with body motion of patients. The prototype is designed based on the constrained volume available in a hip prosthesis and the challenge is to harvest energy from low frequency movements (< 1 Hz) which is an average frequency during free walking of a patient. The concept of magnetic-force-driven energy harvesting is applied to this prototype considering the hip movements during routine activities of patients. The magnetic field within the harvester was simulated using COMSOL. The simulated resonant frequency was around 30 Hz and the voltage induced in a coil was predicted to be 47.8 mV. A prototype of the energy harvester was fabricated and tested. A maximum open circuit voltage of 39.43 mV was obtained and the resonant frequency of 28 Hz was observed. Moreover, the power output of 0.96 μW was achieved with an optimum resistive load of 250Ω

  13. Home healthcare nurse retention and patient outcome model: discussion and model development.

    Science.gov (United States)

    Ellenbecker, Carol Hall; Cushman, Margaret

    2012-08-01

    This paper discusses additions to an empirically tested model of home healthcare nurse retention. An argument is made that the variables of shared decision-making and organizational commitment be added to the model based on the authors' previous research and additional evidence from the literature. Previous research testing the home healthcare nurse retention model established empirical relationships between nurse, agency, and area characteristics to nurse job satisfaction, intent to stay, and retention. Unexplained model variance prompted a new literature search to augment understanding of nurse retention and patient and agency outcomes. Data come from the authors' previous research, and a literature search from 1990 to 2011 on the topics organizational commitment, shared decision-making, nurse retention, patient outcomes and agency performance. The literature provides a rationale for the additional variables of shared decision-making and affective and continuous organizational commitment, linking these variables to nurse job satisfaction, nurse intent to stay, nurse retention and patient outcomes and agency performance. Implications for nursing.  The new variables in the model suggest that all agencies, even those not struggling to retain nurses, should develop interventions to enhance nurse job satisfaction to assure quality patient outcomes. The new nurse retention and patient outcome model increases our understanding of nurse retention. An understanding of the relationship among these variables will guide future research and the development of interventions to create and maintain nursing work environments that contribute to nurse affective agency commitment, nurse retention and quality of patient outcomes. © 2011 Blackwell Publishing Ltd.

  14. Computer Vision for Timber Harvesting

    DEFF Research Database (Denmark)

    Dahl, Anders Lindbjerg

    The goal of this thesis is to investigate computer vision methods for timber harvesting operations. The background for developing computer vision for timber harvesting is to document origin of timber and to collect qualitative and quantitative parameters concerning the timber for efficient harvest...... segments. The purpose of image segmentation is to make the basis for more advanced computer vision methods like object recognition and classification. Our second method concerns image classification and we present a method where we classify small timber samples to tree species based on Active Appearance...... to the development of the logTracker system the described methods have a general applicability making them useful for many other computer vision problems....

  15. Energy Harvesting in Heterogeneous Networks with Hybrid Powered Communication Systems

    KAUST Repository

    Alsharoa, Ahmad

    2018-02-12

    In this paper, we investigate an energy efficient and energy harvesting (EH) system model in heterogeneous networks (HetNets) where all base stations (BSS) are equipped to harvest energy from renewable energy sources. We consider a hybrid power supply of green (renewable) and traditional micro-grid, such that traditional micro-grid is not exploited as long as the BSS can meet their power demands from harvested and stored green energy. Therefore, our goal is to minimize the networkwide energy consumption subject to users\\' certain quality of service and BSS\\' power consumption constraints. As a result of binary BS sleeping status and user-cell association variables, proposed is formulated as a binary linear programming (BLP) problem. A green communication algorithm based on binary particle swarm optimization is implemented to solve the problem with low complexity time.

  16. Recycling retention functions

    International Nuclear Information System (INIS)

    Skrable, K.W.; Chabot, G.E.; Johnson, M.H.

    1981-01-01

    Beginning with the concept of any number of physiologically meaningful compartments that recycle material with a central extracellular fluid compartment and considering various excretion pathways, we solve the differential equations describing the kinetics by the method of Laplace to obtain concise algebraic expressions for the retentions. These expressions contain both fundamental and eigenvalue rate constants; the eigenvalue rate constants are obtained from the solution of a polynomial incorporating the fundamental rate constants. Mathematically exact expressions that predict the biodistribution resulting from continuous uptakes are used to obtain very simple mathematically exact steady state expressions as well as approximate expressions applicable to any time. These steady state and approximate expressions contain only the fundamental rate constants; also, they include a recycling factor that describes the increase in the biodistributions because of recycling. To obtain the values of the fundamental rate constants, short term kinetics studies along with data on the long term distributions are suggested. Retention functions obtained in this way predict both the short term and long term distributions; they therefore are useful in the interpretation of bioassay data and in the estimation of internal doses

  17. Economic valuation of subsistence harvest of wildlife in Madagascar.

    Science.gov (United States)

    Golden, Christopher D; Bonds, Matthew H; Brashares, Justin S; Rasolofoniaina, B J Rodolph; Kremen, Claire

    2014-02-01

    Wildlife consumption can be viewed as an ecosystem provisioning service (the production of a material good through ecological functioning) because of wildlife's ability to persist under sustainable levels of harvest. We used the case of wildlife harvest and consumption in northeastern Madagascar to identify the distribution of these services to local households and communities to further our understanding of local reliance on natural resources. We inferred these benefits from demand curves built with data on wildlife sales transactions. On average, the value of wildlife provisioning represented 57% of annual household cash income in local communities from the Makira Natural Park and Masoala National Park, and harvested areas produced an economic return of U.S.$0.42 ha(-1) · year(-1). Variability in value of harvested wildlife was high among communities and households with an approximate 2 orders of magnitude difference in the proportional value of wildlife to household income. The imputed price of harvested wildlife and its consumption were strongly associated (p< 0.001), and increases in price led to reduced harvest for consumption. Heightened monitoring and enforcement of hunting could increase the costs of harvesting and thus elevate the price and reduce consumption of wildlife. Increased enforcement would therefore be beneficial to biodiversity conservation but could limit local people's food supply. Specifically, our results provide an estimate of the cost of offsetting economic losses to local populations from the enforcement of conservation policies. By explicitly estimating the welfare effects of consumed wildlife, our results may inform targeted interventions by public health and development specialists as they allocate sparse funds to support regions, households, or individuals most vulnerable to changes in access to wildlife. © 2013 Society for Conservation Biology.

  18. Cantilever piezoelectric energy harvester with multiple cavities

    International Nuclear Information System (INIS)

    S Srinivasulu Raju; M Umapathy; G Uma

    2015-01-01

    Energy harvesting employing piezoelectric materials in mechanical structures such as cantilever beams, plates, diaphragms, etc, has been an emerging area of research in recent years. The research in this area is also focused on structural tailoring to improve the harvested power from the energy harvesters. Towards this aim, this paper presents a method for improving the harvested power from a cantilever piezoelectric energy harvester by introducing multiple rectangular cavities. A generalized model for a piezoelectric energy harvester with multiple rectangular cavities at a single section and two sections is developed. A method is suggested to optimize the thickness of the cavities and the number of cavities required to generate a higher output voltage for a given cantilever beam structure. The performance of the optimized energy harvesters is evaluated analytically and through experimentation. The simulation and experimental results show that the performance of the energy harvester can be increased with multiple cavities compared to the harvester with a single cavity. (paper)

  19. Harvest of table olives by mechanical harvesting equipment

    Directory of Open Access Journals (Sweden)

    Filippo Gambella

    2013-09-01

    Full Text Available In this work, we have evaluated the performance, of an electric comb equipped with five undulated fingers used for mechanized the harvesting of table olives. The first aim of the work was to test three different types of coating materials used for covering the fingers: Silicon (S, Vulcanized rubber (VR and Natural rubber (NR. The diameter of the coating materials tested were 7mm (D1, 14 mm (D2, 19 mm (D3 in order to evaluate the damage of different working conditions on the intact olives. During harvesting, silicon at 7mm and 14mm resulted in the largest percentage of undamaged the fruit (67% and 65%, natural rubber 63% and vulcanized rubber at the 54%. The second aim was to evaluate the combination, in terms of the best performance, of the machines used for mechanized harvesting of table olives. Several factors have been examined: undulating fingers variation thickness, different rotational speeds and different coating materials used to reduce the impact damage on olives. From the tests on olive tree we have determined that while plastic materials (S and (NR appear to have a positive role in harvest quality, the vibration transmitted to the operator’s hand is great from 6.48 m/s2 for S to 6.31 m/ s2 for NR and 2.92 m/s2 for VR, respect to the materials used.

  20. Retention capacity of correlated surfaces.

    Science.gov (United States)

    Schrenk, K J; Araújo, N A M; Ziff, R M; Herrmann, H J

    2014-06-01

    We extend the water retention model [C. L. Knecht et al., Phys. Rev. Lett. 108, 045703 (2012)] to correlated random surfaces. We find that the retention capacity of discrete random landscapes is strongly affected by spatial correlations among the heights. This phenomenon is related to the emergence of power-law scaling in the lake volume distribution. We also solve the uncorrelated case exactly for a small lattice and present bounds on the retention of uncorrelated landscapes.

  1. Retention capacity of correlated surfaces

    OpenAIRE

    Schrenk, K. J.; Araújo, N. A. M.; Ziff, R. M.; Herrmann, H. J.

    2014-01-01

    We extend the water retention model [C. L. Knecht et al., Phys. Rev. Lett. 108, 045703 (2012)] to correlated random surfaces. We find that the retention capacity of discrete random landscapes is strongly affected by spatial correlations among the heights. This phenomenon is related to the emergence of power-law scaling in the lake volume distribution. We also solve the uncorrelated case exactly for a small lattice and present bounds on the retention of uncorrelated landscapes.

  2. Evaluating carbon storage, timber harvest, and habitat possibilities for a Western Cascades (USA) forest landscape.

    Science.gov (United States)

    Kline, Jeffrey D; Harmon, Mark E; Spies, Thomas A; Morzillo, Anita T; Pabst, Robert J; McComb, Brenda C; Schnekenburger, Frank; Olsen, Keith A; Csuti, Blair; Vogeler, Jody C

    2016-10-01

    Forest policymakers and managers have long sought ways to evaluate the capability of forest landscapes to jointly produce timber, habitat, and other ecosystem services in response to forest management. Currently, carbon is of particular interest as policies for increasing carbon storage on federal lands are being proposed. However, a challenge in joint production analysis of forest management is adequately representing ecological conditions and processes that influence joint production relationships. We used simulation models of vegetation structure, forest sector carbon, and potential wildlife habitat to characterize landscape-level joint production possibilities for carbon storage, timber harvest, and habitat for seven wildlife species across a range of forest management regimes. We sought to (1) characterize the general relationships of production possibilities for combinations of carbon storage, timber, and habitat, and (2) identify management variables that most influence joint production relationships. Our 160 000-ha study landscape featured environmental conditions typical of forests in the Western Cascade Mountains of Oregon (USA). Our results indicate that managing forests for carbon storage involves trade-offs among timber harvest and habitat for focal wildlife species, depending on the disturbance interval and utilization intensity followed. Joint production possibilities for wildlife species varied in shape, ranging from competitive to complementary to compound, reflecting niche breadth and habitat component needs of species examined. Managing Pacific Northwest forests to store forest sector carbon can be roughly complementary with habitat for Northern Spotted Owl, Olive-sided Flycatcher, and red tree vole. However, managing forests to increase carbon storage potentially can be competitive with timber production and habitat for Pacific marten, Pileated Woodpecker, and Western Bluebird, depending on the disturbance interval and harvest intensity chosen

  3. Uptake and retention of insufflated tantalum by lymph nodes

    International Nuclear Information System (INIS)

    Kilpper, R.W.; Bianco, A.; Gibb, F.R.; Landman, S.; Morrow, P.E.

    1976-01-01

    A nonsacrifice, radiographic technique is presented for evaluating the lymph node uptake of radiographically dense materials from the lungs of beagle dogs into which the material was insufflated. With tantalum as the contrast agent, lymph nodes sometimes become visible within 2 days after exposure when the insufflation resulted in radiographic ''alveolarization'' of some of the tantalum. Localization of the material within the nodes was observed in subsequent radiographs as well as persistent retention after as much as 1 year. Through the use of preinsufflation control films and tantalum foils of varying thickness, densitometric methods for determining the amount of tantalum within the lymph nodes are being investigated. Tantalum-182 is being used to follow the lung retention of the material as well as to verify estimates of burdens in harvested nodes. Preliminary lymphokinetic data are presented from experiments utilizing powders of 1 and 5 μm (mean) particle sizes

  4. Career satisfaction and retention risk among Wisconsin internists.

    Science.gov (United States)

    Giriyappa, Pradeep; Sullivan, Kandis K

    2009-09-01

    Physician career satisfaction has been studied extensively, but career satisfaction as it relates to retention is less well studied. The objective was to assess the relationship between career satisfaction and retention in primary care internal medicine physicians in Wisconsin. In this descriptive quantitative study, survey data was assessed for correlations between career satisfaction, risk to retention, and demographics. The survey included 1231 primary care internal medicine physicians in the Wisconsin Medical Directory (2007). Responses were measured by career satisfaction variables, and demographics and retention variables for the purpose of correlations and regression analysis. Survey responses included 573 physicians. An additional 85 physicians were disqualified. The final survey group included 1146 physicians for a response rate of 50%. A total of 116 physicians (20.2%) reported anticipating leaving their current position, 84 (14.7%) physicians reported anticipating leaving the career of medicine. Identified at risk for retention were 144 (25.1%) physicians. The lowest career satisfaction scores were reported in the areas of compensation (3.19) and practice (3.42) on a scale of 1 (very dissatisfied) to 5 (very satisfied). The highest correlations to retention were associated with practice, followed by compensation satisfaction. The level of significance for this study was identified as 0.05, and the P-value was 0.000. The study findings reveal a significant risk to the stability of continuity of care for patients, and may cost Wisconsin health care organizations more than $35 million in recruitment costs to replace departing physicians.

  5. Triboelectric effect in energy harvesting

    Science.gov (United States)

    Logothetis, I.; Vassiliadis, S.; Siores, E.

    2017-10-01

    With the development of wearable technology, much research has been undertaken in the field of flexible and stretchable electronics for use in interactive attire. The challenging problem wearable technology faces is the ability to provide energy whilst keeping the endproduct comfortable, light, ergonomic and nonintrusive. Energy harvesting, or energy scavenging as it is also known, is the process by which ambient energy is captured and converted into electric energy. The triboelectric effect converts mechanical energy into electrical energy based on the coupling effect of triboelectrification and electrostatic induction and is utilized as the basis for triboelectric generators (TEG). TEG’s are promising for energy harvesting due their high output power and efficiency in conjunction with simple and economical production. Due to the wide availability of materials and ease of integration, in order to produce the triboelectric effect such functional materials are effective for wearable energy harvesting systems. Flexible TEG’s can be built and embedded into attire, although a thorough understanding of the underlying principle of how TEG’s operate needs to be comprehended for the development and in incorporation in smart technical textiles. This paper presents results associated with TEG’S and discusses their suitability for energy harvesting in textiles structures.

  6. Post-harvest loss reduction

    NARCIS (Netherlands)

    Gogh, van Bart; Boerrigter, Henry; Noordam, Maryvon; Ruben, Ruerd; Timmermans, Toine

    2017-01-01

    This paper was written by experts from Wageningen University & Research (WUR), representing their combined expertise on food chains, post-harvest technology, sustainability, food security, economics, and food safety. The paper was drafted at the request of the Dutch Ministry of Economic Affairs

  7. Fluid flow nozzle energy harvesters

    Science.gov (United States)

    Sherrit, Stewart; Lee, Hyeong Jae; Walkemeyer, Phillip; Winn, Tyler; Tosi, Luis Phillipe; Colonius, Tim

    2015-04-01

    Power generation schemes that could be used downhole in an oil well to produce about 1 Watt average power with long-life (decades) are actively being developed. A variety of proposed energy harvesting schemes could be used to extract energy from this environment but each of these has their own limitations that limit their practical use. Since vibrating piezoelectric structures are solid state and can be driven below their fatigue limit, harvesters based on these structures are capable of operating for very long lifetimes (decades); thereby, possibly overcoming a principle limitation of existing technology based on rotating turbo-machinery. An initial survey [1] identified that spline nozzle configurations can be used to excite a vibrating piezoelectric structure in such a way as to convert the abundant flow energy into useful amounts of electrical power. This paper presents current flow energy harvesting designs and experimental results of specific spline nozzle/ bimorph design configurations which have generated suitable power per nozzle at or above well production analogous flow rates. Theoretical models for non-dimensional analysis and constitutive electromechanical model are also presented in this paper to optimize the flow harvesting system.

  8. Drug Retention Times

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-05-01

    The purpose of this monograph is to provide information on drug retention times in the human body. The information provided is based on plausible illegal drug use activities that might be engaged in by a recreational drug user. Based on anecdotal evidence, most people “party” during extended time away from the work environment. Therefore, the following scenarios were envisioned: (1) a person uses an illicit drug at a party on Saturday night (infrequent user); (2) a person uses a drug one time on Friday night and once again on Saturday night (infrequent user); and (3) a person uses a drug on Friday night, uses a drug twice on Saturday night, and once again on Sunday (frequent user).

  9. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  10. Directed formation of micro- and nanoscale patterns of functional light-harvesting LH2 complexes.

    Science.gov (United States)

    Reynolds, Nicholas P; Janusz, Stefan; Escalante-Marun, Maryana; Timney, John; Ducker, Robert E; Olsen, John D; Otto, Cees; Subramaniam, Vinod; Leggett, Graham J; Hunter, C Neil

    2007-11-28

    The precision placement of the desired protein components on a suitable substrate is an essential prelude to any hybrid "biochip" device, but a second and equally important condition must also be met: the retention of full biological activity. Here we demonstrate the selective binding of an optically active membrane protein, the light-harvesting LH2 complex from Rhodobacter sphaeroides, to patterned self-assembled monolayers at the micron scale and the fabrication of nanometer-scale patterns of these molecules using near-field photolithographic methods. In contrast to plasma proteins, which are reversibly adsorbed on many surfaces, the LH2 complex is readily patterned simply by spatial control of surface polarity. Near-field photolithography has yielded rows of light-harvesting complexes only 98 nm wide. Retention of the native optical properties of patterned LH2 molecules was demonstrated using in situ fluorescence emission spectroscopy.

  11. Spring harvest of corn stover

    Energy Technology Data Exchange (ETDEWEB)

    Lizotte, P.L. [Laval Univ., Quebec City, PQ (Canada). Dept. des sols et de genie agroalimentaire; Savoie, P. [Agriculture and Agri-Food Canada, Quebec City, PQ (Canada)

    2010-07-01

    Corn stover is typically left behind in the field after grain harvest. Although part of the stover should remain in the field for soil organic matter renewal and erosion protection, half of the stover could be removed sustainably. This represents about one million t dry matter (DM) of stover per year in the province of Quebec. Stover harvested in the fall is very wet. While there are applications for wet stover, the available markets currently require a dry product. Preliminary measurements have shown that stover left in the field throughout the winter becomes very dry, and a considerable amount would still be harvestable in the spring. In the spring of 2009, corn stover was harvested at 2 sites, each subdivided into 2 parcels. The first parcel was cut and raked in the fall of 2008 (fall parcel), while the second parcel was cut and raked in spring 2009. Fibre from both parcels was baled in the spring 2009. At the first site, a large square baler was used in late April to produce bales measuring 0.8 m x 0.9 m x 1.8 m. On the second site a round baler was used in late May to produce bales of 1.2 m in width by 1.45 m in diameter. On the second site, a small square baler was also used to produce bales of 0.35 m x 0.45 m x 0.60 m (spring cutting only). With the large square baler, an average of 3.9 t DM/ha was harvested equally on the fall parcel and the spring parcel, representing a 48 per cent recovery of biomass based on stover yields.

  12. Promoting Special Educator Teacher Retention

    OpenAIRE

    Jeremy E. Vittek

    2015-01-01

    This article is a critical review of the literature on special education teacher attrition and retention. The research focused on journal articles from 2004 to present. The results of the study helped define special educator attrition and retention. The major themes present in the findings were job satisfaction, administrative support, induction programs, and mentoring. The literature shows a clear need for comprehensi...

  13. Nyala and Bushbuck II: A Harvesting Model.

    Science.gov (United States)

    Fay, Temple H.; Greeff, Johanna C.

    1999-01-01

    Adds a cropping or harvesting term to the animal overpopulation model developed in Part I of this article. Investigates various harvesting strategies that might suggest a solution to the overpopulation problem without actually culling any animals. (ASK)

  14. Electrodynamic energy harvester for electrical transformer's ...

    Indian Academy of Sciences (India)

    Electrical transformer; electrodynamic; energy harvester; self-powered ...... Kennedy S P and Gordner T 2013 Hot spot studies for sheet wound transformer wind- ... and Lambert F 2011 Powering low-cost utility sensors using energy harvesting.

  15. Performance Limits of Communication with Energy Harvesting

    KAUST Repository

    Znaidi, Mohamed Ridha

    2016-01-01

    In energy harvesting communications, the transmitters have to adapt transmission to the availability of energy harvested during communication. The performance of the transmission depends on the channel conditions which vary randomly due to mobility

  16. Electronically droplet energy harvesting using piezoelectric cantilevers

    KAUST Repository

    Al Ahmad, Mahmoud Al; Jabbour, Ghassan E.

    2012-01-01

    A report is presented on free falling droplet energy harvesting using piezoelectric cantilevers. The harvester incorporates a multimorph clamped-free cantilever which is composed of five layers of lead zirconate titanate piezoelectric thick films

  17. Retention of Root Canal Posts

    DEFF Research Database (Denmark)

    Sahafi, A; Benetti, Ana Raquel; Flury, S

    2015-01-01

    The aim of this study was to investigate the effect of the cement film thickness of a zinc phosphate or a resin cement on retention of untreated and pretreated root canal posts. Prefabricated zirconia posts (CosmoPost: 1.4 mm) and two types of luting cements (a zinc phosphate cement [DeTrey Zinc...... received tribochemical silicate coating according to the manufacturer's instructions. Posts were then luted in the prepared root canals (n=30 per group). Following water storage at 37°C for seven days, retention of the posts was determined by the pull-out method. Irrespective of the luting cement......, pretreatment with tribochemical silicate coating significantly increased retention of the posts. Increased cement film thickness resulted in decreased retention of untreated posts and of pretreated posts luted with zinc phosphate cement. Increased cement film thickness had no influence on retention...

  18. Military Retention. A Comparative Outlook

    Directory of Open Access Journals (Sweden)

    Vasile Sminchise

    2016-06-01

    Full Text Available One of the main goals for human resources management structures and for armed forces leaders is to maintain all necessary personnel, both qualitatively and quantitatively for operational needs or for full required capabilities. The retention of military personnel is essential to keep morale and unit readiness and to reduce the costs for recruiting, training, replacement of manpower. Retention rates depend not only on money or other social measures. The goal for retention is to keep in use the most valuable resource that belongs to an organization: the human beings and their knowledge. The aim pf this paper is to provide a comparative analysis of retention measures in various countries based on Research and Technology Organisation report released in 2007 and, thus, provide more examples of retention measures as far as the Romanian military system is concerned.

  19. Energy harvesting devices for harvesting energy from terahertz electromagnetic radiation

    Science.gov (United States)

    Novack, Steven D.; Kotter, Dale K.; Pinhero, Patrick J.

    2012-10-09

    Methods, devices and systems for harvesting energy from electromagnetic radiation are provided including harvesting energy from electromagnetic radiation. In one embodiment, a device includes a substrate and one or more resonance elements disposed in or on the substrate. The resonance elements are configured to have a resonant frequency, for example, in at least one of the infrared, near-infrared and visible light spectra. A layer of conductive material may be disposed over a portion of the substrate to form a ground plane. An optical resonance gap or stand-off layer may be formed between the resonance elements and the ground plane. The optical resonance gap extends a distance between the resonance elements and the layer of conductive material approximately one-quarter wavelength of a wavelength of the at least one resonance element's resonant frequency. At least one energy transfer element may be associated with the at least one resonance element.

  20. Waste energy harvesting mechanical and thermal energies

    CERN Document Server

    Ling Bing, Kong; Hng, Huey Hoon; Boey, Freddy; Zhang, Tianshu

    2014-01-01

    Waste Energy Harvesting overviews the latest progress in waste energy harvesting technologies, with specific focusing on waste thermal mechanical energies. Thermal energy harvesting technologies include thermoelectric effect, storage through phase change materials and pyroelectric effect. Waste mechanical energy harvesting technologies include piezoelectric (ferroelectric) effect with ferroelectric materials and nanogenerators. The book aims to strengthen the syllabus in energy, materials and physics and is well suitable for students and professionals in the fields.

  1. Automated visual fruit detection for harvest estimation and robotic harvesting

    OpenAIRE

    Puttemans, Steven; Vanbrabant, Yasmin; Tits, Laurent; Goedemé, Toon

    2016-01-01

    Fully automated detection and localisation of fruit in orchards is a key component in creating automated robotic harvesting systems, a dream of many farmers around the world to cope with large production and personnel costs. In recent years a lot of research on this topic has been performed, using basic computer vision techniques, like colour based segmentation, as a suggested solution. When not using standard RGB cameras, research tends to resort to other sensors, like hyper spectral or 3D. ...

  2. Harvesting systems for the northern forest hardwoods

    Science.gov (United States)

    Chris B. LeDoux

    2011-01-01

    This monograph is a summary of research results and environmental compliance measures for timber harvesting operations. Data are presented from the Northern Research Station's forest inventory and analysis of 20 states in the northern forest hardwoods. Harvesting systems available in the region today are summarized. Equations for estimating harvesting costs are...

  3. Approaches to automated protein crystal harvesting

    Energy Technology Data Exchange (ETDEWEB)

    Deller, Marc C., E-mail: mdeller@scripps.edu; Rupp, Bernhard, E-mail: mdeller@scripps.edu

    2014-01-28

    Approaches to automated and robot-assisted harvesting of protein crystals are critically reviewed. While no true turn-key solutions for automation of protein crystal harvesting are currently available, systems incorporating advanced robotics and micro-electromechanical systems represent exciting developments with the potential to revolutionize the way in which protein crystals are harvested.

  4. Determinants of feedback retention in soccer players

    Directory of Open Access Journals (Sweden)

    Januário Nuno

    2016-06-01

    Full Text Available This study analyzed soccer players’ retention of coaches’ feedback during training sessions. We intended to determine if the retention of information was influenced by the athletes’ personal characteristic (age, gender and the sports level, the quantity of information included in coach’s feedback (the number of ideas and redundancy, athletes’ perception of the relevance of the feedback information and athletes’ motivation as well as the attention level. The study that was conducted over the course of 18 sessions of soccer practice, involved 12 coaches (8 males, 4 females and 342 athletes (246 males, 96 females, aged between 10 and 18 years old. All coach and athlete interventions were transposed to a written protocol and submitted to content analysis. Descriptive statistics and multiple linear regression were calculated. The results showed that a substantial part of the information was not retained by the athletes; in 65.5% of cases, athletes experienced difficulty in completely reproducing the ideas of the coaches and, on average, the value of feedback retention was 57.0%. Six variables with a statistically significant value were found: gender, the athletes’ sports level, redundancy, the number of transmitted ideas, athletes’ perception of the relevance of the feedback information and the athletes’ motivation level.

  5. RAINWATER RETENTION ON THE HEAVILY INDUSTRIALIZED AREAS

    Directory of Open Access Journals (Sweden)

    Bartosz Kaźmierczak

    2016-06-01

    Full Text Available The paper presents the dimensioning of retention reservoirs indicator method regarding to the German DWA-A 117 guideline, recommended for small rainfall catchments (with an area of 200 ha. A comparative calculation of the retention reservoirs overflow useful volume were conducted for 4 variants of catchment development (degree sealing surface varied from 60% to 90%, under the assumed sewage outflow from the tank at the level of the urban basin natural runoff. At given conditions required unit volume of retention reservoirs, from 145.4 m3 to 206.7 m3 for each 1 ha of catchment area were determined. The obtained results confirmed the fact that useful volume of the tanks were decreased, when Blaszczyk’s pattern reliable rainwater streams were used for calculations. Because the DWA-A 117 guideline method should be applied to a small rainfall catchments, it is recommended to verify the hydraulic capacity of dimensioned channels and objects using hydrodynamic simulations at different load of rainfall catchment scenarios, variable in time and space.

  6. Toward a semi-mechanical harvesting platform system for harvesting blueberries with fresh-market quality

    Science.gov (United States)

    Major concerns related to harvesting blueberries for fresh market with over-the-row (OTR) harvesters are that the quality of the fruit harvested with OTR machines is generally low and ground loss is excessive. Machine-harvested blueberries have more internal bruise and usually soften rapidly in col...

  7. Harvesting NASA's Common Metadata Repository

    Science.gov (United States)

    Shum, D.; Mitchell, A. E.; Durbin, C.; Norton, J.

    2017-12-01

    As part of NASA's Earth Observing System Data and Information System (EOSDIS), the Common Metadata Repository (CMR) stores metadata for over 30,000 datasets from both NASA and international providers along with over 300M granules. This metadata enables sub-second discovery and facilitates data access. While the CMR offers a robust temporal, spatial and keyword search functionality to the general public and international community, it is sometimes more desirable for international partners to harvest the CMR metadata and merge the CMR metadata into a partner's existing metadata repository. This poster will focus on best practices to follow when harvesting CMR metadata to ensure that any changes made to the CMR can also be updated in a partner's own repository. Additionally, since each partner has distinct metadata formats they are able to consume, the best practices will also include guidance on retrieving the metadata in the desired metadata format using CMR's Unified Metadata Model translation software.

  8. Opportunities and challenges for harvest weed seed control in global cropping systems.

    Science.gov (United States)

    Walsh, Michael J; Broster, John C; Schwartz-Lazaro, Lauren M; Norsworthy, Jason K; Davis, Adam S; Tidemann, Breanne D; Beckie, Hugh J; Lyon, Drew J; Soni, Neeta; Neve, Paul; Bagavathiannan, Muthukumar V

    2017-11-28

    The opportunity to target weed seeds during grain harvest was established many decades ago following the introduction of mechanical harvesting and the recognition of high weed-seed retention levels at crop maturity; however, this opportunity remained largely neglected until more recently. The introduction and adoption of harvest weed seed control (HWSC) systems in Australia has been in response to widespread occurrence of herbicide-resistant weed populations. With diminishing herbicide resources and the need to maintain highly productive reduced tillage and stubble-retention practices, growers began to develop systems that targeted weed seeds during crop harvest. Research and development efforts over the past two decades have established the efficacy of HWSC systems in Australian cropping systems, where widespread adoption is now occurring. With similarly dramatic herbicide resistance issues now present across many of the world's cropping regions, it is timely for HWSC systems to be considered for inclusion in weed-management programs in these areas. This review describes HWSC systems and establishing the potential for this approach to weed control in several cropping regions. As observed in Australia, the inclusion of HWSC systems can reduce weed populations substantially reducing the potential for weed adaptation and resistance evolution. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  9. Urinary Retention Associated with Stroke.

    Science.gov (United States)

    Umemura, Takeru; Ohta, Hirotsugu; Yokota, Akira; Yarimizu, Shiroh; Nishizawa, Shigeru

    Patients often exhibit urinary retention following a stroke. Various neuropathological and animal studies have implicated the medulla oblongata, pons, limbic system, frontal lobe as areas responsible for micturition control, although the exact area responsible for urinary retention after stroke is not clear. The purpose of this study was to identify the stroke area responsible for urinary retention by localizing the areas where strokes occur. We assessed 110 patients with cerebral infarction and 27 patients with cerebral hemorrhage (78 men, 59 women; mean age, 73.0 years) who had been admitted to our hospital between October, 2012 and September, 2013. We used computed tomography (CT) and magnetic resonance imaging (MRI) to investigate the stroke location, and evaluated whether post-stroke urinary retention occurred. Twelve (8.8%) of the 137 patients (7 men, 5 women; mean age, 78.8 years) exhibited urinary retention after a stroke. Stroke occurred in the right/left dominant hemisphere in 7 patients; nondominant hemisphere in 1; cerebellum in 3; and brainstem in 1. Strokes in the dominant hemisphere were associated with urinary retention (P = 0.0314), particularly in the area of the insula (P < 0.01). We concluded that stroke affecting the insula of the dominant hemisphere tends to cause urinary retention.

  10. Job embeddedness and nurse retention.

    Science.gov (United States)

    Reitz, O Ed; Anderson, Mary Ann; Hill, Pamela D

    2010-01-01

    Nurse retention is a different way of conceptualizing the employer-employee relationship when compared with turnover. Job embeddedness (JE), a construct based on retention, represents the sum of reasons why employees remain at their jobs. However, JE has not been investigated in relation to locale (urban or rural) or exclusively with a sample of registered nurses (RNs). The purpose of this study was to determine what factors (JE, age, gender, locale, and income) help predict nurse retention. A cross-sectional mailed survey design was used with RNs in different locales (urban or rural). Job embeddedness was measured by the score on the composite, standardized instrument. Nurse retention was measured by self-report items concerning intent to stay. A response rate of 49.3% was obtained. The typical respondent was female (96.1%), white, non-Hispanic (87.4%), and married (74.9%). Age and JE were predictive of nurse retention and accounted for 26% of the explained variance in intent to stay. Although age was a significant predictor of intent to stay, it accounted for only 1.4% of the variance while JE accounted for 24.6% of the variance of nurse retention (as measured by intent to stay). Older, more "embedded" nurses are more likely to remain employed in their current organization. Based on these findings, JE may form the basis for the development of an effective nurse retention program.

  11. Forage Harvest and Transport Costs

    Energy Technology Data Exchange (ETDEWEB)

    Butler, J.; Downing, M.; Turhollow, A.

    1998-12-01

    An engineering-economic approach is used to calculate harvest, in-field transport, and over-the-road transport costs for hay as bales and modules, silage, and crop residues as bales and modules. Costs included are equipment depreciation interest; fuel, lube, and oil; repairs; insurance, housing, and taxes; and labor. Field preparation, pest control, fertilizer, land, and overhead are excluded from the costs calculated Equipment is constrained by power available, throughput or carrying capacity, and field speed.

  12. Influence of the mechanical properties of resilient denture liners on the retention of overdenture attachments.

    Science.gov (United States)

    Kubo, Keitaro; Koike, Takashi; Ueda, Takayuki; Sakurai, Kaoru

    2018-03-15

    Information is lacking about the selection criteria for silicone resilient denture liners applied as a matrix material for attachments on overdentures. The purpose of this in vitro study was to investigate the mechanical properties of silicone resilient denture liners and their influence on the initial retention force of overdenture attachments and the reduction in retention force over time. Nine types of silicone resilient denture liner were injected and fixed to the matrix section of an experimental denture base. They were then fitted to an epoxy resin model that simulated the residual ridge with a patrix ball attachment (n=10). The retention force of the denture was measured with a digital force gauge, and the maximum force of traction (N) was regarded as the initial retention force. The retention force reduction (N) after repeated insertion and removal (n=5) was calculated by subtracting the retention force after 3348 cycles (3-year simulated insertion and removal) from the initial retention force. The intaglio of the matrix was observed with a scanning electron microscope (SEM) before and after the 3348 cycles. Four mechanical properties (hardness, strain-in-compression, tensile strength, and arithmetic mean roughness) of the resilient denture liners were measured. One-way ANOVA of the initial retention force of each lining material was performed, followed by the Scheffe test (α=.05). Pearson correlation analysis was used (α=.05) to analyze correlations of the initial retention force with the retention force reduction after insertion and removal and the mechanical properties of each material. Multiple regression analysis with the stepwise method extracted the initial retention force and the retention force reduction as dependent variables, and the resilient denture liner mechanical properties as explanatory variables (α=.05). The initial retention force of the resilient denture liners was 1.3 to 5.4 N. Multiple comparisons showed significant differences in

  13. Postgraduation retention of medical students from Otago and Auckland medical programmes.

    Science.gov (United States)

    Shelker, William; Poole, Phillippa; Bagg, Warwick; Wood, Ian; Glue, Paul

    2014-01-24

    Auckland and Otago medical programmes have different methods for selecting students. This study compared postgraduate retention in New Zealand (NZ) of medical graduates from the two medical programmes, to assess whether different selection methods influenced retention. Other variables assessed included entrance category and age at graduation. Anonymised databases were created of all graduates from the Otago Faculty of Medicine (1999-2011) and the Auckland medical programme (2000-2012). Demographic and entry category data were recorded. Retention was defined as presence on the NZ Medical Register in December 2012. Risk differences (RD) were calculated to compare retention between the two medical programmes using the Mantel-Haenszel method. The influence of medical programme entrance category on retention was also tested. The influence of covariates on retaining graduates on the register was evaluated using a multiple logistic regression model. The postgraduate retention of graduates of the two medical programmes over 13 years was identical (Auckland 74.9%, Otago 73.6%, P=0.48). Retention of graduate and non-graduate entry students from both medical programmes was similar by 6 years after graduation. Age during medical school did not affect retention. University of attendance had no effect on postgraduation retention of students on the NZ Medical Register, suggesting that retention is not influenced by the different student selection methods at each programme. The data presented shows that New Zealand graduates regardless of programme completed show a similar profile in terms of retention.

  14. Review of magnetostrictive vibration energy harvesters

    Science.gov (United States)

    Deng, Zhangxian; Dapino, Marcelo J.

    2017-10-01

    The field of energy harvesting has grown concurrently with the rapid development of portable and wireless electronics in which reliable and long-lasting power sources are required. Electrochemical batteries have a limited lifespan and require periodic recharging. In contrast, vibration energy harvesters can supply uninterrupted power by scavenging useful electrical energy from ambient structural vibrations. This article reviews the current state of vibration energy harvesters based on magnetostrictive materials, especially Terfenol-D and Galfenol. Existing magnetostrictive harvester designs are compared in terms of various performance metrics. Advanced techniques that can reduce device size and improve performance are presented. Models for magnetostrictive devices are summarized to guide future harvester designs.

  15. Sustainable harvest of waterbirds: a global review

    DEFF Research Database (Denmark)

    Kanstrup, Niels

    ABSTRACT Waterbirds have a long tradition of being harvested in various ways. In many countries, the harvest takes place as a primary food source, but recreational hunting is also very popular. Various methods are used. Subsistence hunting of waterbirds has a history that dates back to the dawn...... and the degree of stability in local communities obtained through nature conservation. In many countries there is a long tradition of detailed wildlife harvest management including programmes for bag surveys and monitoring of harvest levels. In most countries, however, the management of waterbird harvests...

  16. Issues in vibration energy harvesting

    Science.gov (United States)

    Zhang, Hui; Corr, Lawrence R.; Ma, Tianwei

    2018-05-01

    In this study, fundamental issues related to bandwidth and nonlinear resonance in vibrational energy harvesting devices are investigated. The results show that using bandwidth as a criterion to measure device performance can be misleading. For a linear device, an enlarged bandwidth is achieved at the cost of sacrificing device performance near resonance, and thus widening the bandwidth may offer benefits only when the natural frequency of the linear device cannot match the dominant excitation frequency. For a nonlinear device, since the principle of superposition does not apply, the ''broadband" performance improvements achieved for single-frequency excitations may not be achievable for multi-frequency excitations. It is also shown that a large-amplitude response based on the traditional ''nonlinear resonance" does not always result in the optimal performance for a nonlinear device because of the negative work done by the excitation, which indicates energy is returned back to the excitation. Such undesired negative work is eliminated at global resonance, a generalized resonant condition for both linear and nonlinear systems. While the linear resonance is a special case of global resonance for a single-frequency excitation, the maximum potential of nonlinear energy harvesting can be reached for multi-frequency excitations by using global resonance to simultaneously harvest energy distributed over multiple frequencies.

  17. Harvesting Information from Heterogeneous Sources

    DEFF Research Database (Denmark)

    Qureshi, Pir Abdul Rasool; Memon, Nasrullah; Wiil, Uffe Kock

    2011-01-01

    The abundance of information regarding any topic makes the Internet a very good resource. Even though searching the Internet is very easy, what remains difficult is to automate the process of information extraction from the available online information due to the lack of structure and the diversi...... with performance of our tool with respect to each format. Finally, the different potential applications of the proposed tool are discussed with special emphasis on open source intelligence....... in the sharing methods. Most of the times, information is stored in different proprietary formats, complying with different standards and protocols which makes tasks like data mining and information harvesting very difficult. In this paper, an information harvesting tool (heteroHarvest) is presented...... with objectives to address these problems by filtering the useful information and then normalizing the information in a singular non hypertext format. We also discuss state of the art tools along with the shortcomings and present the results of an analysis carried out over different heterogeneous formats along...

  18. The Retention of Female Unrestricted Line Officers

    National Research Council Canada - National Science Library

    Pecenco, Elena G

    2005-01-01

    This thesis analyzes the retention of female Naval officers, focusing on the relationship between officer selection metrics and retention beyond minimum service obligation and the effect of lateral...

  19. Modeling the Effects of Harvest Alternatives on Mitigating Oak Decline in a Central Hardwood Forest Landscape.

    Directory of Open Access Journals (Sweden)

    Wen J Wang

    Full Text Available Oak decline is a process induced by complex interactions of predisposing factors, inciting factors, and contributing factors operating at tree, stand, and landscape scales. It has greatly altered species composition and stand structure in affected areas. Thinning, clearcutting, and group selection are widely adopted harvest alternatives for reducing forest vulnerability to oak decline by removing susceptible species and declining trees. However, the long-term, landscape-scale effects of these different harvest alternatives are not well studied because of the limited availability of experimental data. In this study, we applied a forest landscape model in combination with field studies to evaluate the effects of the three harvest alternatives on mitigating oak decline in a Central Hardwood Forest landscape. Results showed that the potential oak decline in high risk sites decreased strongly in the next five decades irrespective of harvest alternatives. This is because oak decline is a natural process and forest succession (e.g., high tree mortality resulting from intense competition would eventually lead to the decrease in oak decline in this area. However, forest harvesting did play a role in mitigating oak decline and the effectiveness varied among the three harvest alternatives. The group selection and clearcutting alternatives were most effective in mitigating oak decline in the short and medium terms, respectively. The long-term effects of the three harvest alternatives on mitigating oak decline became less discernible as the role of succession increased. The thinning alternative had the highest biomass retention over time, followed by the group selection and clearcutting alternatives. The group selection alternative that balanced treatment effects and retaining biomass was the most viable alternative for managing oak decline. Insights from this study may be useful in developing effective and informed forest harvesting plans for managing oak

  20. Data Retention and Anonymity Services

    Science.gov (United States)

    Berthold, Stefan; Böhme, Rainer; Köpsell, Stefan

    The recently introduced legislation on data retention to aid prosecuting cyber-related crime in Europe also affects the achievable security of systems for anonymous communication on the Internet. We argue that data retention requires a review of existing security evaluations against a new class of realistic adversary models. In particular, we present theoretical results and first empirical evidence for intersection attacks by law enforcement authorities. The reference architecture for our study is the anonymity service AN.ON, from which we also collect empirical data. Our adversary model reflects an interpretation of the current implementation of the EC Directive on Data Retention in Germany.

  1. Autotransplantation donor tooth site harvesting using piezosurgery.

    Science.gov (United States)

    Ylikontiola, Leena P; Sándor, George K

    2016-01-01

    The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. A piezosurgical handpiece and its selection of tips were easily adapted to allow the harvesting and delivery of teeth for autotransplantation purposes. Twenty premolar teeth were harvested using a piezosurgical device. The harvested teeth were subsequently successfully autotransplanted. All twenty teeth healed in a satisfactory manner without excessive mobility or ankyloses. Piezosurgery avoids some of the traumatic aspects of harvesting teeth and removing bone which are associated with thermal damage from the use of conventional rotary instruments or saws. Piezosurgery can be adapted to facilitate the predictable harvesting of teeth for autotransplantation purposes.

  2. The Influence of Workplace Attraction on Recruitment and Retention

    Science.gov (United States)

    Amundson, Norman E.

    2007-01-01

    Economic changes have made the topics of recruitment and retention key issues for career development and human resource professionals. In this article, a model of workplace attraction is presented as 1 way of better understanding the match between workers and workplaces. Many contextual variables such as age, culture, and gender influence the…

  3. Effectiveness Testing of a Piezoelectric Energy Harvester for an Automobile Wheel Using Stochastic Resonance

    Directory of Open Access Journals (Sweden)

    Yunshun Zhang

    2016-10-01

    Full Text Available The collection of clean power from ambient vibrations is considered a promising method for energy harvesting. For the case of wheel rotation, the present study investigates the effectiveness of a piezoelectric energy harvester, with the application of stochastic resonance to optimize the efficiency of energy harvesting. It is hypothesized that when the wheel rotates at variable speeds, the energy harvester is subjected to on-road noise as ambient excitations and a tangentially acting gravity force as a periodic modulation force, which can stimulate stochastic resonance. The energy harvester was miniaturized with a bistable cantilever structure, and the on-road noise was measured for the implementation of a vibrator in an experimental setting. A validation experiment revealed that the harvesting system was optimized to capture power that was approximately 12 times that captured under only on-road noise excitation and 50 times that captured under only the periodic gravity force. Moreover, the investigation of up-sweep excitations with increasing rotational frequency confirmed that stochastic resonance is effective in optimizing the performance of the energy harvester, with a certain bandwidth of vehicle speeds. An actual-vehicle experiment validates that the prototype harvester using stochastic resonance is capable of improving power generation performance for practical tire application.

  4. The Harvest and Management of Migratory Bird Eggs by Inuit in Nunatsiavut, Labrador

    Science.gov (United States)

    Natcher, David; Felt, Larry; Chaulk, Keith; Procter, Andrea

    2012-12-01

    This paper presents the results of collaborative research conducted in 2007 on the harvest of migratory bird eggs by Inuit households of Nunatsiavut, Labrador. Harvest variability between communities and species is examined, as is the social and ecological factors affecting the 2007 Inuit egg harvest. Representing the first comprehensive account of Inuit egg use in Labrador, this information should be valuable to agencies responsible for managing migratory bird populations in North America and will contribute to a more informed understanding of the complexity and temporal variability in subsistence harvesting among Labrador Inuit. It is argued that the recognition of this complexity will be critical as the Nunatsiavut Government and other wildlife management agencies formulate management policies that are supportive rather, than constraining, to Inuit resource use in the future.

  5. Increasing Army Retention Through Incentives

    National Research Council Canada - National Science Library

    Beerman, Kevin

    2006-01-01

    .... If the Army fails to address the enlisted retention issue in the near future departures of experienced NCOs will have a detrimental impact our military's ability to provide for our nation's security...

  6. Is Enlisted Retention too High?

    National Research Council Canada - National Science Library

    Hansen, M

    2003-01-01

    .... The consensus appears to be that higher retention is better for the Navy; more experienced Sailors improve readiness and allow the Navy to devote fewer resources to the recruiting, training, and acculturation of new accessions...

  7. Transit ridership, reliability, and retention.

    Science.gov (United States)

    2008-10-01

    This project explores two major components that affect transit ridership: travel time reliability and rider : retention. It has been recognized that transit travel time reliability may have a significant impact on : attractiveness of transit to many ...

  8. Systems for harvesting and handling cotton plant residue

    Energy Technology Data Exchange (ETDEWEB)

    Coates, W. [Univ. of Arizona, Tucson, AZ (United States)

    1993-12-31

    In the warmer regions of the United States, cotton plant residue must be buried to prevent it from serving as an overwintering site for insect pests such as the pink bollworm. Most of the field operations used to bury the residue are high energy consumers and tend to degrade soil structure, thereby increasing the potential for erosion. The residue is of little value as a soil amendment and consequently is considered a negative value biomass. A commercial system to harvest cotton plant residue would be of both economic and environmental benefit to cotton producers. Research has been underway at the University of Arizona since the spring of 1991 to develop a commercially viable system for harvesting cotton plant residue. Equipment durability, degree of densification, energy required, cleanliness of the harvested material, and ease of product handling and transport are some of the performance variables which have been measured. Two systems have proven superior. In both, the plants are pulled from the ground using an implement developed specifically for the purpose. In one system, the stalks are baled using a large round baler, while in the other the stalks are chopped with a forage harvester, and then made into packages using a cotton module maker. Field capacities, energy requirements, package density and durability, and ease of handling with commercially available equipment have been measured for both systems. Selection of an optimum system for a specific operation depends upon end use of the product, and upon equipment availability.

  9. Emotional intelligence, performance, and retention in clinical staff nurses.

    Science.gov (United States)

    Codier, Estelle; Kamikawa, Cindy; Kooker, Barbara M; Shoultz, Jan

    2009-01-01

    Emotional intelligence has been correlated with performance, retention, and organizational commitment in professions other than nursing. A 2006 pilot study provided the first evidence of a correlation between emotional intelligence and performance in clinical staff nurses. A follow-up study was completed, the purpose of which was to explore emotional intelligence, performance level, organizational commitment, and retention. A convenience sample of 350 nurses in a large medical center in urban Hawaii participated in this study. This article reports the findings pertaining to the subset of 193 clinical staff nurses who responded. The Mayer-Salovey-Caruso Emotional Intelligence Test instrument was used to measure emotional intelligence abilities. Performance was defined as ranking on a clinical ladder. Commitment was scored on a Likert scale. The following variables measured retention: total years in nursing, years in current job, total years anticipated in current job, and total anticipated career length. Emotional intelligence scores in clinical staff nurses correlated positively with both performance level and retention variables. Clinical staff nurses with higher emotional intelligence scores demonstrated higher performance, had longer careers, and greater job retention.

  10. phosphorus retention data and metadata

    Science.gov (United States)

    phosphorus retention in wetlands data and metadataThis dataset is associated with the following publication:Lane , C., and B. Autrey. Phosphorus retention of forested and emergent marsh depressional wetlands in differing land uses in Florida, USA. Wetlands Ecology and Management. Springer Science and Business Media B.V;Formerly Kluwer Academic Publishers B.V., GERMANY, 24(1): 45-60, (2016).

  11. Promoting Special Educator Teacher Retention

    Directory of Open Access Journals (Sweden)

    Jeremy E. Vittek

    2015-06-01

    Full Text Available This article is a critical review of the literature on special education teacher attrition and retention. The research focused on journal articles from 2004 to present. The results of the study helped define special educator attrition and retention. The major themes present in the findings were job satisfaction, administrative support, induction programs, and mentoring. The literature shows a clear need for comprehensive administrative support to improve job satisfaction and the likelihood a special educator will remain in their job.

  12. Ecosystem Nitrogen Retention Following Severe Bark Beetle and Salvage Logging Disturbance in Lodgepole Pine Forests: a 15N Enrichment Study

    Science.gov (United States)

    Avera, B.; Rhoades, C.; Paul, E. A.; Cotrufo, M. F.

    2017-12-01

    In recent decades, bark beetle outbreaks have caused high levels of tree mortality in lodgepole pine (Pinus contorta) dominated forests across western North America. Previous work has found increased soil mineral nitrogen (N) with tree mortality in beetle infested stands, but surprisingly little change in stream N export. These findings suggest an important role of residual live vegetation and altered soil microbial response for retaining surplus N and mitigating N losses from disturbed lodgepole forests. Post outbreak salvage of merchantable timber reduces fuel levels and promotes tree regeneration; however, the implications of the combined bark beetle and harvesting disturbances on ecosystem N retention and productivity are uncertain. To advance understanding of post-disturbance N retention we compare unlogged beetle-infested forests and salvage logged stands with post-harvest woody residue retention or removal. We applied 15N-labeled (2 atom%) and natural abundance ammonium sulfate to eight year old lodgepole pine seedlings in three replicate plots of the three forest management treatments. This approach allows us to quantify the relative contributions of N retention in soil, microbial biomass, and plant tissue. Our study targets gaps in understanding of the processes that regulate N utilization and transfer between soil and vegetation that result in effective N retention in lodgepole pine ecosystems. These findings will also help guide forest harvest and woody residue management practices in order to maintain soil productivity.

  13. Monetary and Non-monetary SWO Retention Bonuses: An Experimental Approach to the Combinatorial Retention Auction Mechanism (CRAM)

    Science.gov (United States)

    2009-12-01

    aircraft carrier would not function properly nor could a guided missile destroyer fulfill its missions. Retention of qualified and motivated ...19 Jason Blake Ellis, “Variability of Valuation of Non-Monetary Incentives: Motivating and...this illustration offer individual values that exceed the Navy’s cost to provide the incentive for most individuals. On the other hand, telecommuting

  14. Three-dimensional hierarchical structures for fog harvesting.

    Science.gov (United States)

    Andrews, H G; Eccles, E A; Schofield, W C E; Badyal, J P S

    2011-04-05

    Conventional fog-harvesting mechanisms are effectively pseudo-2D surface phenomena in terms of water droplet-plant interactions. In the case of the Cotula fallax plant, a unique hierarchical 3D arrangement formed by its leaves and the fine hairs covering them has been found to underpin the collection and retention of water droplets on the foliage for extended periods of time. The mechanisms of water capture and release as a function of the surface 3D structure and chemistry have been identified. Of particular note is that water is retained throughout the entirety of the plant and held within the foliage itself (rather than in localized regions). Individual plant hairs form matlike structures capable of supporting water droplets; these hairs wrap around water droplets in a 3D fashion to secure them via a fine nanoscale groove structure that prevents them from easily falling to the ground.

  15. Dynamic optimization of combined harvesting of a two-species fishery

    International Nuclear Information System (INIS)

    Chaudhuri, K.

    1986-06-01

    In the present paper, the author considers the problem of dynamic optimization of the exploitation policy connected with the combined harvesting of two competing fish species, each of which obeys the logistic growth law. The singular extremal trajectory in the phase plane is derived by taking the harvesting effort as a dynamic variable. Biological or bioeconomic interpretations of the constraints required for this singular extremal are also given. (author)

  16. Sustainability of Mangrove Harvesting: How do Harvesters' Perceptions Differ from Ecological Analysis?

    Directory of Open Access Journals (Sweden)

    Laura López-Hoffman

    2006-12-01

    Full Text Available To harvest biological resources sustainably, it is first necessary to understand what "sustainability" means in an ecological context, and what it means to the people who use the resources. As a case study, we examined the extractive logging of the mangrove Rhizophora mangle in the Río Limón area of Lake Maracaibo, in western Venezuela. The ecological definition of sustainable harvesting is harvesting that allows population numbers to be maintained or to increase over time. In interviews, the harvesters defined sustainable harvesting as levels permitting the maintenance of the mangrove population over two human generations, about 50 yr. In Río Limón, harvesters extract a combination of small adult and juvenile trees. Harvesting rates ranged from 7-35% of small adult trees. These harvesting levels would be sustainable according to the harvester's definition as long as juvenile harvesting was less than 40%. However, some harvesting levels that would be sustainable according to the harvesters were ecologically unsustainable, i.e., eventually causing declines in mangrove population numbers. It was also determined that the structure of mangrove forests was significantly affected by harvesting; even areas harvested at low, ecologically sustainable intensities had significantly fewer adult trees than undisturbed sites. Western Venezuela has no organized timber industry, so mangrove logs are used in many types of construction. A lagging economy and a lack of alternative construction materials make mangrove harvesting inevitable, and for local people, an economic necessity. This creates a trade-off between preserving the ecological characteristics of the mangrove population and responding to human needs. In order to resolve this situation, we recommended a limited and adaptive mangrove harvesting regime. We also suggest that harvesters could participate in community-based management programs as harvesting monitors.

  17. Applying New Technologies to Transform Blueberry Harvesting

    Directory of Open Access Journals (Sweden)

    Fumiomi Takeda

    2017-05-01

    Full Text Available The growth of the blueberry industry in the past three decades has been remarkably robust. However, a labor shortage for hand harvesting, increasingly higher labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study, we evaluated semi-mechanical harvesting systems consisting of a harvest-aid platform with soft fruit catching surfaces that collected the fruit detached by portable, hand-held, pneumatic shakers. The softer fruit catching surfaces were not glued to the hard sub-surfaces of the harvest-aid platform, but suspended over them. Also, the ergonomic aspect of operating powered harvesting equipment was determined. The pneumatic shakers removed 3.5 to 15 times more fruit (g/min than by hand. Soft fruit catching surfaces reduced impact force and bruise damage. Fruit firmness was higher in fruit harvested by hand compared to that by pneumatic shakers in some cultivars. The bruise area was less than 8% in fruit harvested by hand and with semi-mechanical harvesting system. The percentage of blue, packable fruit harvested by pneumatic shakers comprised as much as 90% of the total, but less than that of hand-harvested fruit. The ergonomic analysis by electromyography showed that muscle strain in the back, shoulders, and forearms was low in workers operating the light-weight, pneumatic shakers that were tethered to the platform with a tool balancer. The new harvesting method can reduce the labor requirement to about 100 hour/hectare/year and help to mitigate the rising labor cost and shortage of workers for harvesting fresh-market quality blueberries.

  18. Wideband Piezomagnetoelastic Vibration Energy Harvesting

    DEFF Research Database (Denmark)

    Lei, Anders; Thomsen, Erik Vilain

    2014-01-01

    This work presents a small-scale wideband piezomagnetoelastic vibration energy harvester (VEH) aimed for operation at frequencies of a few hundred Hz. The VEH consists of a tape-casted PZT cantilever with thin sheets of iron foil attached on each side of the free tip. The wideband operation...... is achieved by placing the cantilever in a magnetic field induced by either one or two magnets located oppositely of the cantilever. The attraction force created by the magnetic field and iron foils introduces a mechanical force in opposite direction of the cantilevers restoring force causing a spring...

  19. Integration with Energy Harvesting Technology

    Directory of Open Access Journals (Sweden)

    S. Williams

    2012-11-01

    Full Text Available This paper reports on the design and implementation of a wireless sensor communication system with a low power consumption that allows it to be integrated with the energy harvesting technology. The system design and implementation focus on reducing the power consumption at three levels: hardware, software and data transmission. The reduction in power consumption, at hardware level in particular, is mainly achieved through the introduction of an energy-aware interface (EAI that ensures a smart inter-correlated management of the energy flow. The resulted system satisfies the requirements of a wireless sensor structure that possesses the energy autonomous capability.

  20. Flow Energy Piezoelectric Bimorph Nozzle Harvester

    Science.gov (United States)

    Sherrit, Stewart (Inventor); Walkemeyer, Phillip E. (Inventor); Hall, Jeffrey L. (Inventor); Lee, Hyeong Jae (Inventor); Colonius, Tim (Inventor); Tosi, Phillipe (Inventor); Kim, Namhyo (Inventor); Sun, Kai (Inventor); Corbett, Thomas Gary (Inventor); Arrazola, Alvaro Jose (Inventor)

    2016-01-01

    A flow energy harvesting device having a harvester pipe includes a flow inlet that receives flow from a primary pipe, a flow outlet that returns the flow into the primary pipe, and a flow diverter within the harvester pipe having an inlet section coupled to the flow inlet, a flow constriction section coupled to the inlet section and positioned at a midpoint of the harvester pipe and having a spline shape with a substantially reduced flow opening size at a constriction point along the spline shape, and an outlet section coupled to the constriction section. The harvester pipe may further include a piezoelectric structure extending from the inlet section through the constriction section and point such that the fluid flow past the constriction point results in oscillatory pressure amplitude inducing vibrations in the piezoelectric structure sufficient to cause a direct piezoelectric effect and to generate electrical power for harvesting.

  1. Predictors of retention in a multicomponent treatment for smokers

    Directory of Open Access Journals (Sweden)

    Ana Moreno-Coutiño

    Full Text Available Abstract Background: There is a lack of knowledge about factors that promote or hinder retention of smokers in treatment. Objective: The aim of this study was the identification of variables that predict retention of smokers who received a multicomponent treatment against smoking. Method: Participants (n = 79 simultaneously received pharmacological and psychological treatment, including an intervention phase prior to the date of smoking cessation. They were evaluated periodically in their abstinence, depressive and anxious symptoms, and were randomly assigned to three treatment conditions (nicotine patch, bupropion or nicotine patch + bupropion. Eighteen variables were grouped into four categories (demographic, consumption pattern, mood and treatment. Data were analyzed using student's t test and X2, for inclusion into a multivariate logistic regression model. Results: Results indicate that age of onset of regular tobacco consumption, secondary education and bupropion pharmacological treatment are significant in relation to the retention of smokers to smoking treatment. Discussion: The reported “age of onset” correlates with treatment retention (OR = 1.545, 95 % CI = 1.175-2.032. This variable has not previously been reported in the literature, and taking it into account in the design of prevention and treatment for smoking could increase their success.

  2. Macronutrient and fatty acid profiles of meagre (Argyrosomus regius fillets as influenced by harvesting time and boiling

    Directory of Open Access Journals (Sweden)

    Roberta Martelli

    2013-12-01

    Full Text Available The effect of harvesting time and cooking on water, protein, lipid, ash and fatty acid content of farmed meagre was assessed. Significant differences in nutrient content of raw fillets were detected in relation to harvesting time. Cooking by boiling induced loss of some macronutrients, mainly lipids and some fatty acids. Retention of total lipids, C18:2n-6 and C18:3n-3 decreased significantly with harvesting time, while C20:5n-3 (EPA and C22:6n-3 (DHA were retained in the same quantity. DHA retention was higher than that of the other FAs considered, at all harvesting times. The changes detected did not diminish the nutritional value of the fish. Despite losses induced by cooking and the low fat content, typical of this species, 100 g of fillet ensured an intake of EPA plus DHA more than double the recommended daily intake (250 mg day–1, at all harvesting times. The ability to preserve nutrients is an essential requirement for quality maintenance and suggests the possibility of heat-processing fillets. 

  3. Design, simulation, fabrication, and characterization of MEMS vibration energy harvesters

    Science.gov (United States)

    Oxaal, John

    Energy harvesting from ambient sources has been a longtime goal for microsystem engineers. The energy available from ambient sources is substantial and could be used to power wireless micro devices, making them fully autonomous. Self-powered wireless sensors could have many applications in for autonomous monitoring of residential, commercial, industrial, geological, or biological environments. Ambient vibrations are of particular interest for energy harvesting as they are ubiquitous and have ample kinetic energy. In this work a MEMS device for vibration energy harvesting using a variable capacitor structure is presented. The nonlinear electromechanical dynamics of a gap-closing type structure is experimentally studied. Important experimental considerations such as the importance of reducing off-axis vibration during testing, characterization methods, dust contamination, and the effect of grounding on parasitic capacitance are discussed. A comprehensive physics based model is developed and validated with two different microfabricated devices. To achieve maximal power, devices with high aspect ratio electrodes and a novel two-level stopper system are designed and fabricated. The maximum achieved power from the MEMS device when driven by sinusoidal vibrations was 3.38 muW. Vibrations from HVAC air ducts, which have a primary frequency of 65 Hz and amplitude of 155 mgrms, are targeted as the vibration source and devices are designed for maximal power harvesting potential at those conditions. Harvesting from the air ducts, the devices reached 118 nW of power. When normalized to the operating conditions, the best figure of merit of the devices tested was an order of magnitude above state-of-the-art of the devices (1.24E-6).

  4. Rooftop level rainwater harvesting system

    Science.gov (United States)

    Traboulsi, Hayssam; Traboulsi, Marwa

    2017-05-01

    Unfortunately, in Lebanon and other countries in the Middle East region, water becomes scarcer than ever before, and over the last decades the demand on domestic water has increased due to population and economic growth. Although rainwater harvesting is considered to be a safe and reliable alternative source for domestic water, the inconvenience or impracticalities related to the cost and space needed for the construction of ground or underground storage tanks makes this practice not widely common in rural areas and rarely implemented in urban cities. This paper introduces a new technique to rainwater harvesting which can be easily used in both rural and urban areas: it collects and stores rainwater directly in tanks already installed on building roofs and not necessarily in special ground or underground ones. If widely adopted in Lebanon, this technique could help in: (1) collecting around 23 MCM (70 % of the current deficit in the domestic water supply) of rainwater and thus increasing the available water per m2 of building by 0.4 m3 per year, (2) saving around 7 % of the amount of electric energy usually needed to pump water from an aquifer well and ground or underground tank, and (3) considerably reducing the rate of surface runoff of rainwater at the coastal zones where rainwater is not captured at all and goes directly to the sea.

  5. Characterization of Piezoelectric Energy Harvesting MEMS

    Science.gov (United States)

    2015-12-01

    of previously fabricated MEMS piezoelectric energy harvesters and use the results to optimize an advanced finite element model to be used in...possibilities of using solar power and the piezoelectric effect to harvest energy [12]. The design goal was to develop an energy harvester with a resonant... The piezoelectric properties of AlN are also relatively constant over a wide range of temperatures [7]. AlN was further characterized

  6. College Choice as a Linking Variable between Recruitment and Retention.

    Science.gov (United States)

    Villella, Edward F.; Hu, Michael

    1990-01-01

    A study of 740 first-year university students found a strong positive correlation between students' college choice, subsequent expectations of the institution, and intent to stay at or leave the university. It is suggested that processes occurring before matriculation are as significant as the college social and academic environment or external…

  7. Teacher Attrition Variables That Influence Retention and Job Satisfaction

    Science.gov (United States)

    Butler, Leslie Garmon

    2014-01-01

    Teacher attrition is a major problem. According to researchers at North Carolina State University, more teachers are leaving the profession than staying or entering. Accordingly, school systems in the United States find themselves in the predicament where they must hire teachers who have little teaching experience or who have not been adequately…

  8. Apparatus and method for harvesting woody plantations

    Science.gov (United States)

    Eggen, D.L.

    1988-11-15

    A tree harvester for harvesting felled trees includes a wheel mounted wood chipper which moves toward the butt ends of the tree stems to be processed. The harvester includes a plurality of rotating alignment discs in front of the chipper. These discs align the tree stems to be processed with the mouth of the chipper. A chipper infeed cylinder is rotatably mounted between the discs and the front end of the chipper, and lifts the tree stem butts up from the ground into alignment with the chipper inlet port. The chips discharge from the chipper and go into a chip hopper which moves with the tree harvester. 8 figs.

  9. Energy-Harvesting Wireless Sensor Networks

    DEFF Research Database (Denmark)

    Fafoutis, Xenofon; Vuckovic, Dusan; Di Mauro, Alessio

    2012-01-01

    Energy Harvesting comprises a promising solution to one of the key problems faced by battery-powered Wireless Sensor Networks, namely the limited nature of the energy supply (finite battery capacity). By harvesting energy from the surrounding environment, the sensors can have a continuous lifetime...... Sensor Networks with energy harvesting capability....... without any needs for battery recharge or replacement. However, energy harvesting introduces a change to the fundamental principles based on which WSNs are designed and realized. In this poster we sketch some of the key research challenges as well as our ongoing work in designing and realizing Wireless...

  10. Microelectronic circuit design for energy harvesting systems

    CERN Document Server

    Di Paolo Emilio, Maurizio

    2017-01-01

    This book describes the design of microelectronic circuits for energy harvesting, broadband energy conversion, new methods and technologies for energy conversion. The author also discusses the design of power management circuits and the implementation of voltage regulators. Coverage includes advanced methods in low and high power electronics, as well as principles of micro-scale design based on piezoelectric, electromagnetic and thermoelectric technologies with control and conditioning circuit design. Provides a single-source reference to energy harvesting and its applications; Serves as a practical guide to microelectronics design for energy harvesting, with application to mobile power supplies; Enables readers to develop energy harvesting systems for wearable/mobile electronics.

  11. Mobile Learning and Student Retention

    Directory of Open Access Journals (Sweden)

    Bharat Inder Fozdar

    2007-06-01

    Full Text Available Student retention in open and distance learning (ODL is comparatively poor to traditional education and, in some contexts, embarrassingly low. Literature on the subject of student retention in ODL indicates that even when interventions are designed and undertaken to improve student retention, they tend to fall short. Moreover, this area has not been well researched. The main aim of our research, therefore, is to better understand and measure students’ attitudes and perceptions towards the effectiveness of mobile learning. Our hope is to determine how this technology can be optimally used to improve student retention at Bachelor of Science programmes at Indira Gandhi National Open University (IGNOU in India. For our research, we used a survey. Results of this survey clearly indicate that offering mobile learning could be one method improving retention of BSc students, by enhancing their teaching/ learning and improving the efficacy of IGNOU’s existing student support system. The biggest advantage of this technology is that it can be used anywhere, anytime. Moreover, as mobile phone usage in India explodes, it offers IGNOU easy access to a larger number of learners. This study is intended to help inform those who are seeking to adopt mobile learning systems with the aim of improving communication and enriching students’ learning experiences in their ODL institutions.

  12. Retention of minority participants in clinical research studies.

    Science.gov (United States)

    Keller, Colleen S; Gonzales, Adelita; Fleuriet, K Jill

    2005-04-01

    Recruitment of minority participants for clinical research studies has been the topic of several analytical works. Yet retention of participants, most notably minority and underserved populations, is less reported and understood, even though these populations have elevated health risks. This article describes two related, intervention-based formative research projects in which researchers used treatment theory to address issues of recruitment and retention of minority women participants in an exercise program to reduce obesity. Treatment theory incorporates a model of health promotion that allows investigators to identify and control sources of extraneous variables. The authors' research demonstrates that treatment theory can improve retention of minority women participants by considering critical inputs, mediating processes, and substantive participant characteristics in intervention design.

  13. Rainwater harvesting - An investigation into the potential for rainwater harvesting in Bradford

    OpenAIRE

    Doncaster, S.; Blanksby, J.; Shepherd, W.

    2012-01-01

    This report provides a brief review of rainwater harvesting and rainwater harvesting tools, which are then used in case study examples for domestic, office block and warehouse rain water harvesting scenarios. Rainwater harvesting is placed in an historical context as a source of water supply and in a modern context as being complementary to centralised water distribution networks with benefits for wider water management including flood risk treatment as well as providing environmental and eco...

  14. Flocculation of retention pond water

    International Nuclear Information System (INIS)

    Hart, B.T.; McGregor, R.J.

    1982-05-01

    An integral part of the water management strategy proposed by Ranger Uranium Mining Pty. Ltd. involves the collection of runoff water in a series of retention ponds. This water will subsequently be used in the uranium milling plant or released to Magela Creek. Runoff water collected during the wet season caused a section of Magela Creek to become turbid when it was released. The eroded material causing the turbidity was very highly dispersed and showed little tendency to sediment out in the retention ponds. Results of a preliminary study to determine the feasibility of clarifying retention pond water by flocculation with alum are presented. A concentration of 30 Mg/L alum reduced turbidity from an initial 340 NTU to less than 30 NTU in four hours

  15. Student retention in athletic training education programs.

    Science.gov (United States)

    Dodge, Thomas M; Mitchell, Murray F; Mensch, James M

    2009-01-01

    The success of any academic program, including athletic training, depends upon attracting and keeping quality students. The nature of persistent students versus students who prematurely leave the athletic training major is not known. Understanding the profiles of athletic training students who persist or leave is important. To (1) explore the relationships among the following variables: anticipatory factors, academic integration, clinical integration, social integration, and motivation; (2) determine which of the aforementioned variables discriminate between senior athletic training students and major changers; and (3) identify which variable is the strongest predictor of persistence in athletic training education programs. Descriptive study using a qualitative and quantitative mixed-methods approach. Thirteen athletic training education programs located in District 3 of the National Athletic Trainers' Association. Ninety-four senior-level athletic training students and 31 college students who changed majors from athletic training to another degree option. Data were collected with the Athletic Training Education Program Student Retention Questionnaire (ATEPSRQ). Data from the ATEPSRQ were analyzed via Pearson correlations, multivariate analysis of variance, univariate analysis of variance, and a stepwise discriminant analysis. Open-ended questions were transcribed and analyzed using open, axial, and selective coding procedures. Member checks and peer debriefing techniques ensured trustworthiness of the study. Pearson correlations identified moderate relationships among motivation and clinical integration (r = 0.515, P accounting for 37.2% of the variance between groups. The theoretic model accurately classified 95.7% of the seniors and 53.8% of the major changers. A common theme emerging from the qualitative data was the presence of a strong peer-support group that surrounded many of the senior-level students. Understanding student retention in athletic training is

  16. Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

    NARCIS (Netherlands)

    Matova, S.P.; Elfrink, R.; Vullers, R.J.M.; Schaijk, R. van

    2011-01-01

    In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with

  17. Effect of time of harvest, stage of fruit ripening, and post-harvest ...

    African Journals Online (AJOL)

    Seeds were extracted from half of the fruits harvested from each stage immediately after harvest while the other halves were stored at room temperature to ripen to the soft-red stage before seed extraction. Fruit weight in both cultivars decreased with plant age. Fruits harvested at the yellow-ripe stage produced the highest ...

  18. A new harvest operation cost model to evaluate forest harvest layout alternatives

    Science.gov (United States)

    Mark M. Clark; Russell D. Meller; Timothy P. McDonald; Chao Chi Ting

    1997-01-01

    The authors develop a new model for harvest operation costs that can be used to evaluate stands for potential harvest. The model is based on felling, extraction, and access costs, and is unique in its consideration of the interaction between harvest area shapes and access roads. The scientists illustrate the model and evaluate the impact of stand size, volume, and road...

  19. Short communication. Harvest time in hedgerow Arbequina olive orchards in areas with early frosts

    Energy Technology Data Exchange (ETDEWEB)

    Gracia, P.; Sanchez-Gimeno, A. C.; Benito, M.; Oria, R.; Lasa, J. M.

    2012-11-01

    The shortening of harvest time attained in hedgerow olive (Olea europaea L.) orchards represents an advantage for the adoption of this cropping system in areas that are prone to suffer frost during the harvest period. To establish an optimal harvesting window, we carried out a study of the fruit ripening process on a hedgerow orchard of Arbequina olive trees, located in Zaragoza (Spain). From 2007 to 2009, oil accumulation on the fruit (% of dry weight) and oil yield (grams of oil per 100 fruits) were monitored, from early September to late November. Over the three years both variables peaked around November 15th, indicating that Arbequina reached full ripening earlier than has been reported previously for this variety. In two of the three seasons the orchard suffered several frosts during November. Long term climatic data from this area indicated that the risk of early frosts (< -2 degree centigrade) increases as November progresses with a high risk after November 20{sup t}h. In conclusion, the optimal harvesting period for Arbequina in this area should not extend beyond November 20{sup t}h. A rapid harvesting before this date is advisable to avoid the risk of damage caused by early frost in Zaragoza. Hedgerow planting provides an additional advantage in frost-prone areas, because mechanization of operations permits a short harvest period, easier to fit into the optimal harvesting window. (Author) 20 refs.

  20. Recovery following experimental harvesting of Laminaria longicruris and L. digitata in southwestern Nova Scotia

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B D

    1985-01-01

    Laminaria population variables and understory community composition were monitored just prior to, and for two summers following, a September 1980 experimental total harvest of L. longicruris De la Pylaie and L. digitata (L.) Lamouroux within two plots in Lobster Bay, Nova Scotia. Both plots, distinguished mainly by depth, were characterized by high Laminaria standing crop and no recent history of extensive sea urchin grazing. Within the shallower plot (2-3 m below MSL), recovery could not be assessed thoroughly due to ice damage, but within the deeper plot (3-4 m below MSL), L. longicruris regrew cropped biomass and attained maximum observed abundance within one year. Both Laminaria species required two years to mature to pre-harvest population characteristics. Survivorship of 0-1 year old and mature populations of both species was generally low (0-67% per year); however, the higher maximum life expectancy of L. digitata (>4 years vs 2 years) can result in that species persisting to the disadvantage of L. longicruris. Analysis of understory community composition for both harvested plots and their adjacent controls weakly distinguished the harvested plots one summer after harvesting from all others. It is doubtful the distinction is attributable to harvesting and in neither site was there evidence of a critical change in the understory community. Management implications for the commercial harvest of the brown alga Laminaria are discussed.

  1. Gatherings as a retention strategy.

    Science.gov (United States)

    Stokes, Lillian Gatlin

    2003-01-01

    Retention has long been an issue for minority students enrolled in nursing programs. Indiana University put into place an initiative to enhance retention. The initiative is "Gatherings" which provide a means for maintaining contact and direct communication with minority/international students. Gatherings allow students at varied levels in the program to interact with each other and to share issues and concerns. Over a five-year period, the benefits of this initiative have been voiced by students. These students have strongly encouraged continuation of "gatherings". Plans are underway to start similar sessions for all students.

  2. Psychological determinants of job retention in multiple sclerosis.

    Science.gov (United States)

    Ford, Helen L; Wicks, Charlotte R; Stroud, Amanda; Tennant, Alan

    2018-01-01

    Maintaining paid work is a key issue for people with multiple sclerosis (PwMS). Different factors, including psychological attributes, can influence job retention. Understanding their role should inform potential interventions to help PwMS retain employment. The aim of this study was to identify the key factors which improve job retention in an employed cohort of PwMS. This three-year longitudinal study used validated self-completed measures of physical and psychological factors at four time points over 28 months. Of 208 employed PwMS, just over 1 in 10 was no longer working at the end of the study. Three variables were predictive of continuing employment; low 'work instability' at baseline increased the odds of job retention by a factor of 12.76; high levels of self-efficacy by a factor of 4.66 and being less than 50 years of age increased the odds of job retention by a factor of 3.90. Path analysis demonstrated the mediating role of self-efficacy between the physical impact of MS and the level of work instability at exit. Screening for work instability and self-efficacy in a clinical setting followed by appropriate interventions to increase self-efficacy and reduce work instability could aid job retention in MS.

  3. Retention of Mohs surgeons in academic dermatology.

    Science.gov (United States)

    Zhang, Shali; Mina, Mary Alice; Brown, Marc D; Zwald, Fiona O

    2015-08-01

    Retention of academic Mohs surgeons is important for the growth of this specialty and teaching of residents and students. To examine factors that influence retention of Mohs surgeons in academics and to better understand reasons for their departure. A survey was electronically distributed to academic Mohs surgeons in the American College of Mohs Surgery, asking them to rate the importance of several variables on their decision to remain in academia. Private practice Mohs surgeons who had left academics were also surveyed. Two hundred thirty-six dermatologic surgeons completed the survey. Twenty-nine percent work full time in academics, and approximately 7% work part time. The top reasons for practicing in the academic setting are intellectual stimulation, teaching opportunities, and collaboration with other university physicians and researchers. Seventy-one percent of respondents reported they would stay in academics, 7% indicated they would not, and 22% were unsure. Unfair compensation, inadequate support staff, poor leadership, increased bureaucracy, and decreased autonomy were top reasons that may compel a Mohs surgeon to leave. Opportunities for intellectual stimulation, collaboration, and teaching remain the main draw for academic Mohs surgeons. A supportive environment, strong leadership, and establishing fair compensation are imperative in ensuring their stay.

  4. Profitability of wood harvesting enterprises

    Energy Technology Data Exchange (ETDEWEB)

    Penttinen, M. email: markku.penttinen@metla.fi; Mikkola, J. email: jarmo.mikkola@metla.fi; Rummukainen, A. email: arto.rummukainen@metla.fi

    2009-07-01

    The forest machine business is about 50 years old. The rapid technical development of machinery increased productivity up to the end of last century. In 2007, the total value of round and energy wood harvesting and silvicultural work operated by forest machine enterprises exceeded 570 mill. euro. According to the materials of the Vehicle Administration Finland and Statistics Finland there are about 1 600 active harvesting enterprises in the personal and business taxation system. Beside this, there are according to the Ministry of Agriculture and Forestry about 1 300 farmers who do harvesting as side business. About 1 000 enterprises working in June 2007 were studied with their retrospective economic analyses from 2001. The data includes all enterprises that had supplied closing of the accounts data. One-machine entrepreneurs represent more than a third of the number of enterprises, but only 13 percent of the turnover. Enterprises with seven or more machines represent less than ten percent of the number, but over twenty percent of the turnover. Enterprises are largest in eastern and northern Finland, where the average number of machines per enterprise exceeds three. Small enterprises are mostly singleowner business enterprises with a median turnover of 125 000 euros per annum. Partnerships and limited enterprises have double the median turnover of single-owner businesss. Limited companies turn over a median of 450 000 euro/y, representing 67 percent of total turnover. Median net profit varied between 6 and 10 percent of turnover in 2001-2007, but only between 2 and 4 percent where the wage adjustment is deducted from the profit. The wage adjustment is estimated as if the owners of single-owner businesses earn an operator's salary. Profit was highest in 2002 and lowest 2006. In the smallest enterprise class with a turnover of less than 75 000 euro/y, profit was lowest and negative in 2006 and 2007. The variation in profits between enterprises was also biggest in

  5. Light Harvesting for Organic Photovoltaics

    Science.gov (United States)

    2016-01-01

    The field of organic photovoltaics has developed rapidly over the last 2 decades, and small solar cells with power conversion efficiencies of 13% have been demonstrated. Light absorbed in the organic layers forms tightly bound excitons that are split into free electrons and holes using heterojunctions of electron donor and acceptor materials, which are then extracted at electrodes to give useful electrical power. This review gives a concise description of the fundamental processes in photovoltaic devices, with the main emphasis on the characterization of energy transfer and its role in dictating device architecture, including multilayer planar heterojunctions, and on the factors that impact free carrier generation from dissociated excitons. We briefly discuss harvesting of triplet excitons, which now attracts substantial interest when used in conjunction with singlet fission. Finally, we introduce the techniques used by researchers for characterization and engineering of bulk heterojunctions to realize large photocurrents, and examine the formed morphology in three prototypical blends. PMID:27951633

  6. Biogenesis of light harvesting proteins.

    Science.gov (United States)

    Dall'Osto, Luca; Bressan, Mauro; Bassi, Roberto

    2015-09-01

    The LHC family includes nuclear-encoded, integral thylakoid membrane proteins, most of which coordinate chlorophyll and xanthophyll chromophores. By assembling with the core complexes of both photosystems, LHCs form a flexible peripheral moiety for enhancing light-harvesting cross-section, regulating its efficiency and providing protection against photo-oxidative stress. Upon its first appearance, LHC proteins underwent evolutionary diversification into a large protein family with a complex genetic redundancy. Such differentiation appears as a crucial event in the adaptation of photosynthetic organisms to changing environmental conditions and land colonization. The structure of photosystems, including nuclear- and chloroplast-encoded subunits, presented the cell with a number of challenges for the control of the light harvesting function. Indeed, LHC-encoding messages are translated in the cytosol, and pre-proteins imported into the chloroplast, processed to their mature size and targeted to the thylakoids where are assembled with chromophores. Thus, a tight coordination between nuclear and plastid gene expression, in response to environmental stimuli, is required to adjust LHC composition during photoacclimation. In recent years, remarkable progress has been achieved in elucidating structure, function and regulatory pathways involving LHCs; however, a number of molecular details still await elucidation. In this review, we will provide an overview on the current knowledge on LHC biogenesis, ranging from organization of pigment-protein complexes to the modulation of gene expression, import and targeting to the photosynthetic membranes, and regulation of LHC assembly and turnover. Genes controlling these events are potential candidate for biotechnological applications aimed at optimizing light use efficiency of photosynthetic organisms. This article is part of a Special Issue entitled: Chloroplast biogenesis. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Effects of post-harvest handling techniques on the retention of phytochemicals in wild blueberries

    Science.gov (United States)

    Wild blueberries (WBB) are known to have a unique phytochemical profile that boasts antioxidant and anti-inflammatory potential. Polyphenolic compounds in WBB conclusively demonstrate human health benefits ranging from decreases in cardiovascular risk factors and improving insulin sensitivity to bat...

  8. Water harvesting and soil moisture retention: A study guide for farmer field schools

    OpenAIRE

    Duveskog, D.

    2001-01-01

    Metadata only record Since a majority of individuals in Sub-Saharan Africa depend on rainfed agriculture, it is necessary to provide tools that will better equip these individuals to increase their yields and improve their farming techniques. This study guide is intended to assist farmers in learning and experimenting on improved soil and water management. The target groups for the study guide are Farmer Field Schools, village farmers groups and local agricultural extension staff. Avail...

  9. Towards Complete Coverage in Focused Web Harvesting

    NARCIS (Netherlands)

    Khelghati, Mohammadreza; Hiemstra, Djoerd; van Keulen, Maurice

    2015-01-01

    With the goal of harvesting all information about a given entity, in this paper, we try to harvest all matching documents for a given query submitted on a search engine. The objective is to retrieve all information about for instance "Michael Jackson", "Islamic State", or "FC Barcelona" from indexed

  10. Harvesting of microalgae by bio-flocculation

    NARCIS (Netherlands)

    Salim, S.; Bosma, R.; Vermuë, M.H.; Wijffels, R.H.

    2011-01-01

    The high-energy input for harvesting biomass makes current commercial microalgal biodiesel production economically unfeasible. A novel harvesting method is presented as a cost and energy efficient alternative: the bio-flocculation by using one flocculating microalga to concentrate the

  11. Applying new technologies to transform blueberry harvesting

    Science.gov (United States)

    The growth of the blueberry industry in the past three decades has been remarkable. However, labor shortage for hand harvesting, increasingly high labor costs, and low harvest efficiencies are becoming bottlenecks for sustainable development of the fresh market blueberry production. In this study ...

  12. Ultrasound acoustic wave energy transfer and harvesting

    Science.gov (United States)

    Shahab, Shima; Leadenham, Stephen; Guillot, François; Sabra, Karim; Erturk, Alper

    2014-04-01

    This paper investigates low-power electricity generation from ultrasound acoustic wave energy transfer combined with piezoelectric energy harvesting for wireless applications ranging from medical implants to naval sensor systems. The focus is placed on an underwater system that consists of a pulsating source for spherical wave generation and a harvester connected to an external resistive load for quantifying the electrical power output. An analytical electro-acoustic model is developed to relate the source strength to the electrical power output of the harvester located at a specific distance from the source. The model couples the energy harvester dynamics (piezoelectric device and electrical load) with the source strength through the acoustic-structure interaction at the harvester-fluid interface. Case studies are given for a detailed understanding of the coupled system dynamics under various conditions. Specifically the relationship between the electrical power output and system parameters, such as the distance of the harvester from the source, dimensions of the harvester, level of source strength, and electrical load resistance are explored. Sensitivity of the electrical power output to the excitation frequency in the neighborhood of the harvester's underwater resonance frequency is also reported.

  13. Dielectric loss against piezoelectric power harvesting

    Science.gov (United States)

    Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

    2014-09-01

    Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems.

  14. Setting analyst: A practical harvest planning technique

    Science.gov (United States)

    Olivier R.M. Halleux; W. Dale Greene

    2001-01-01

    Setting Analyst is an ArcView extension that facilitates practical harvest planning for ground-based systems. By modeling the travel patterns of ground-based machines, it compares different harvesting settings based on projected average skidding distance, logging costs, and site disturbance levels. Setting Analyst uses information commonly available to consulting...

  15. Determinants of rainwater harvesting technology (RWHT) adoption ...

    African Journals Online (AJOL)

    2014-11-26

    Nov 26, 2014 ... study evaluated the determinants of farmers' decisions to adopt rainwater harvesting technology ... adoption of RWHT in the study area. ... In South Africa, agriculture involves large numbers of ... Study area and data collection ..... study in rainwater harvesting: A 2011 perspective. ... Kluwer Academic.

  16. West Virginia harvest and utilization study, 2008

    Science.gov (United States)

    Jan Wiedenbeck; Shawn. Grushecky

    2014-01-01

    Thirty active harvesting operations were part of a harvest and utilization study conducted in West Virginia in 2008. Data were collected on roundwood product and residue yields obtained from trees of different sizes, species, and qualities. This study was modeled after studies conducted on a regular and frequent basis by the Forest Inventory and Analysis unit in the...

  17. Suitability of Water Harvesting in the Upper Blue Nile Basin, Ethiopia: A First Step towards a Mesoscale Hydrological Modeling Framework

    Directory of Open Access Journals (Sweden)

    Yihun T. Dile

    2016-01-01

    Full Text Available Extreme rainfall variability has been one of the major factors to famine and environmental degradation in Ethiopia. The potential for water harvesting in the Upper Blue Nile Basin was assessed using two GIS-based Multicriteria Evaluation methods: (1 a Boolean approach to locate suitable areas for in situ and ex situ systems and (2 a weighted overlay analysis to classify suitable areas into different water harvesting suitability levels. The sensitivity of the results was analyzed to the influence given to different constraining factors. A large part of the basin was suitable for water harvesting: the Boolean analysis showed that 36% of the basin was suitable for in situ and ex situ systems, while the weighted overlay analysis showed that 6–24% of the basin was highly suitable. Rainfall has the highest influence on suitability for water harvesting. Implementing water harvesting in nonagricultural land use types may further increase the benefit. Assessing water harvesting suitability at the larger catchment scale lays the foundation for modeling of water harvesting at mesoscale, which enables analysis of the potential and implications of upscaling of water harvesting practices for building resilience against climatic shocks. A complete water harvesting suitability study requires socioeconomic analysis and stakeholder consultation.

  18. Piezoelectric energy harvesting from broadband random vibrations

    International Nuclear Information System (INIS)

    Adhikari, S; Friswell, M I; Inman, D J

    2009-01-01

    Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples

  19. Piezoelectric energy harvesting from broadband random vibrations

    Science.gov (United States)

    Adhikari, S.; Friswell, M. I.; Inman, D. J.

    2009-11-01

    Energy harvesting for the purpose of powering low power electronic sensor systems has received explosive attention in the last few years. Most works using deterministic approaches focusing on using the piezoelectric effect to harvest ambient vibration energy have concentrated on cantilever beams at resonance using harmonic excitation. Here, using a stochastic approach, we focus on using a stack configuration and harvesting broadband vibration energy, a more practically available ambient source. It is assumed that the ambient base excitation is stationary Gaussian white noise, which has a constant power-spectral density across the frequency range considered. The mean power acquired from a piezoelectric vibration-based energy harvester subjected to random base excitation is derived using the theory of random vibrations. Two cases, namely the harvesting circuit with and without an inductor, have been considered. Exact closed-form expressions involving non-dimensional parameters of the electromechanical system have been given and illustrated using numerical examples.

  20. A Miniature Coupled Bistable Vibration Energy Harvester

    International Nuclear Information System (INIS)

    Zhu, D; Arthur, D C; Beeby, S P

    2014-01-01

    This paper reports the design and test of a miniature coupled bistable vibration energy harvester. Operation of a bistable structure largely depends on vibration amplitude rather than frequency, which makes it very promising for wideband vibration energy harvesting applications. A coupled bistable structure consists of a pair of mobile magnets that create two potential wells and thus the bistable phenomenon. It requires lower excitation to trigger bistable operation compared to conventional bistable structures. Based on previous research, this work focused on miniaturisation of the coupled bistable structure for energy harvesting application. The proposed bistable energy harvester is a combination of a Duffing's nonlinear structure and a linear assisting resonator. Experimental results show that the output spectrum of the miniature coupled bistable vibration energy harvester was the superposition of several spectra. It had a higher maximum output power and a much greater bandwidth compared to simply the Duffing's structure without the assisting resonator

  1. Experimental measurement of energy harvesting with backpack

    Science.gov (United States)

    Pavelkova, Radka; Vala, David; Suranek, Pavel; Mahdal, Miroslav

    2017-08-01

    This article deals with the energy harvesting systems, especially the energy harvesting backpack, which appears as a convenient means for energy harvesting for mobile sensors power. Before starting the experiment, it was necessary to verify whether this energy will be sufficient to get acquainted with the human kinematics and analyze problematics itself. For this purpose there was used motion capture technology from Xsens. Measured data on the position of a particle moving man and back when walking, these data were then used for experimental realization of energy harvesting backpack and as input data to the simulation in Simulink, which brought us a comparison between theoretical assumptions and practical implementation. When measuring characteristics of energy harvesting system we have a problem with measurements on backpack solved when redoing of the hydraulic cylinder as a source of a suitable movement corresponding to the amplitude and frequency of human walk.

  2. Retention-Oriented Curricular Design

    Science.gov (United States)

    Milanovic, Ivana; Eppes, Tom A.; Girouard, Janice; Townsend, Lee

    2010-01-01

    This paper presents a retention-oriented approach to the educational value stream within the STEM undergraduate area. Faced with several strategic challenges and opportunities, a Flex Advantage Plan was developed to enhance the undergraduate engineering technology programs and better utilize the curricular flexibilities inherent in the current…

  3. Memory control with selective retention

    NARCIS (Netherlands)

    2012-01-01

    The present invention relates to a memory circuit and a method of controlling data retention in the memory circuit, wherein a supply signal is selectively switched to a respective one of at least two virtual supply lines (24) each shared by a respective one of a plurality of groups (30-1 to 30-n) of

  4. Memory control with selective retention

    NARCIS (Netherlands)

    2010-01-01

    The present invention relates to a memory circuit and a method of controlling data retention in the memory circuit, wherein a supply signal is selectively switched to a respective one of at least two virtual supply lines (24) each shared by a respective one of a plurality of groups (30-1 to 30-n) of

  5. Strategies for improving employee retention.

    Science.gov (United States)

    Verlander, Edward G; Evans, Martin R

    2007-03-28

    This article proposes a solution to the perennial problem of talent retention in the clinical laboratory. It includes the presentation of 12 strategies that may be used to significantly improve institutional identity formation and establishment of the psychological contract that employees form with laboratory management. Identity formation and psychological contracting are deemed as essential in helping reduce employee turnover and increase retention. The 12 conversational strategies may be used as a set of best practices for all employees, but most importantly for new employees, and should be implemented at the critical moment when employees first join the laboratory. This time is referred to as "retention on-boarding"--the period of induction and laboratory orientation. Retention on-boarding involves a dialogue between employees and management that is focused on the psychological, practical, cultural, and political dimensions of the laboratory. It is placed in the context of the modern clinical laboratory, which is faced with employing and managing Generation X knowledge workers. Specific topics and broad content areas of those conversations are outlined.

  6. Maslow's Hierarchy and Student Retention.

    Science.gov (United States)

    Brookman, David M.

    1989-01-01

    Abraham Maslow's hierarchy of needs offers perspective on student motivation and a rationale for college retention programing. Student affairs and faculty interventions addressing student safety needs and engaging students' sense of purpose reinforce persistence. A mentor program is a possible cooperative effort between student personnel and…

  7. [Gastroduodenal intussusception causing gastric retention.

    DEFF Research Database (Denmark)

    Alamili, M.; Berg, J.O.; Lindstrom, C.

    2008-01-01

    A case of gastroduodenal intussusception caused by a duodenal lipoma is presented. The condition was characterized by severe upper gastrointestinal retention, epigastric pain and weight loss. The mass was diagnosed by CT scan. The diagnosis was confirmed by operation. The patient was treated succ...

  8. Teacher Retention: An Appreciative Approach

    Science.gov (United States)

    Pesavento-Conway, Jennifer Jean

    2010-01-01

    Nationally, the problem of teacher retention compounds the unstable nature of the educational situation, especially in urban, high-needs schools. Much of the instability of urban schools is due to teacher movement, the migration of teachers from school to another school within or between school districts, particularly from high-needs schools.…

  9. [Gastroduodenal intussusception causing gastric retention.

    DEFF Research Database (Denmark)

    Alamili, M.; Berg, J.O.; Lindstrom, C.

    2008-01-01

    A case of gastroduodenal intussusception caused by a duodenal lipoma is presented. The condition was characterized by severe upper gastrointestinal retention, epigastric pain and weight loss. The mass was diagnosed by CT scan. The diagnosis was confirmed by operation. The patient was treated...

  10. A national study of the retention of Irish opiate users in methadone substitution treatment

    LENUS (Irish Health Repository)

    Mullen, Louise

    2012-07-02

    Background: Retention in treatment is a key indicator of methadone treatment success. The study aims to identify factors that are associated with retention. Objectives: To determine retention in treatment at 12 months for Irish opiate users in methadone substitution treatment and to indicate factors that increase the likelihood of retention. Methods: National cohort study of randomly selected opiate users commencing methadone treatment in 1999, 2001, and 2003 (n = 1269). Results: Sixty-one percent of patients attending methadone treatment remained in continuous treatment for more than 1 year. Retention in treatment at 12 months was associated with age, gender, facility type, and methadone dose. Age and gender were no longer significant when adjusted for other variables in the model. Those who attended a specialist site were twice as likely to leave methadone treatment within 12 months compared with those who attended a primary care physician. The most important predictor of retention in treatment was methadone dose. Those who received <60 mg of methadone were three times more likely to leave treatment. Conclusion: Retention in methadone treatment is high in Ireland in a variety of settings. The main factors influencing retention in methadone treatment was an adequate methadone dose and access to a range of treatment settings including from primary care physicians. Scientific Significance: Providing an adequate dose of methadone during treatment will increase the likelihood of treatment retention. Methadone treatment by the primary care physician is a successful method of retaining opioid users in treatment.

  11. Harvesting energy from airflow with a michromachined piezoelectric harvester inside a Helmholtz resonator

    International Nuclear Information System (INIS)

    Matova, S P; Elfrink, R; Vullers, R J M; Van Schaijk, R

    2011-01-01

    In this paper we report an airflow energy harvester that combines a piezoelectric energy harvester with a Helmholtz resonator. The resonator converts airflow energy to air oscillations which in turn are converted into electrical energy by a piezoelectric harvester. Two Helmholtz resonators with adjustable resonance frequencies have been designed—one with a solid bottom and one with membrane on the bottom. The resonance frequencies of the resonators were matched to the complementing piezoelectric harvesters during harvesting. The aim of the presented work is a feasibility study on using packaged piezoelectric energy harvesters with Helmholtz resonators for airflow energy harvesting. The maximum energy we were able to obtain was 42.2 µW at 20 m s −1

  12. Harvester : An edge service harvesting heterogeneous resources for ATLAS

    CERN Document Server

    Maeno, Tadashi; The ATLAS collaboration

    2018-01-01

    The Production and Distributed Analysis (PanDA) system has been successfully used in the ATLAS experiment as a data-driven workload management system. The PanDA system has proven to be capable of operating at the Large Hadron Collider data processing scale over the last decade including the Run 1 and Run 2 data taking periods. PanDA was originally designed to be weakly coupled with the WLCG processing resources. Lately the system is revealing the difficulties to optimally integrate and exploit new resource types such as HPC and preemptable cloud resources with instant spin-up, and new workflows such as the event service, because their intrinsic nature and requirements are quite different from that of traditional grid resources. Therefore, a new component, Harvester, has been developed to mediate the control and information flow between PanDA and the resources, in order to enable more intelligent workload management and dynamic resource provisioning based on detailed knowledge of resource capabilities and thei...

  13. Wireless Energy Harvesting Using Signals from Multiple Fading Channels

    KAUST Repository

    Chen, Yunfei; Zhao, Nan; Alouini, Mohamed-Slim

    2017-01-01

    fading or Gamma-shadowed Rician fading. The received signals are then harvested by using either a single harvester for simultaneous transmissions or multiple harvesters for transmissions at different frequencies, antennas or time slots. Both linear

  14. Natural Regeneration in a Multi-Layered Pinus sylvestris-Picea abies Forest after Target Diameter Harvest and Soil Scarification

    Directory of Open Access Journals (Sweden)

    Lars Drössler

    2017-01-01

    Full Text Available Forest management in Sweden can be characterized by even-aged silviculture heavily relying on three established harvest regimes: clearcutting, the seed-tree method, and the shelterwood system. Less intense, small-scale retention harvest systems such as single tree and group selection harvest are rarely used. In addition, natural regeneration dynamics without enrichment planting have barely been studied. Consequently, this study examined natural regeneration establishment in a multi-layered Pinus sylvestris-Picea abies forest stand in southwest Sweden after target diameter harvesting and soil scarification. The creation of forest canopy gaps had a positive effect on total seedling density five years after harvest, mainly due to a significantly higher number of Betula pendula individuals. Seedling density of more desirable tree species suitable for continuous cover forestry such as Fagus sylvatica, Quercus petraea and Picea abies also increased substantially in gaps when compared to pre-harvest conditions or the unharvested plots. In contrast, soil scarification did not increase the number of seedlings of desired tree species due to a significant decrease in Picea abies abundance. Soil moisture and gap size significantly improved Betula pendula seedling establishment while a larger number of Quercus petraea seedlings were observed in Vaccinium myrtillus patches. We conclude that canopy gaps are beneficial under the encountered stand conditions to initiate forest regeneration, and that soil scarification without the timely occurrence of a mast year of desired tree species is not effective in the type of forest studied.

  15. Ethephon As a Potential Abscission Agent for Table Grapes: Effects on Pre-Harvest Abscission, Fruit Quality, and Residue

    Science.gov (United States)

    Ferrara, Giuseppe; Mazzeo, Andrea; Matarrese, Angela M. S.; Pacucci, Carmela; Trani, Antonio; Fidelibus, Matthew W.; Gambacorta, Giuseppe

    2016-01-01

    Some plant growth regulators, including ethephon, can stimulate abscission of mature grape berries. The stimulation of grape berry abscission reduces fruit detachment force (FDF) and promotes the development of a dry stem scar, both of which could facilitate the production of high quality stemless fresh-cut table grapes. The objective of this research was to determine how two potential abscission treatments, 1445 and 2890 mg/L ethephon, affected FDF, pre-harvest abscission, fruit quality, and ethephon residue of Thompson Seedless and Crimson Seedless grapes. Both ethephon treatments strongly induced abscission of Thompson Seedless berries causing >90% pre-harvest abscission. Lower ethephon rates, a shorter post-harvest interval, or berry retention systems such as nets, would be needed to prevent excessive pre-harvest losses. The treatments also slightly affected Thompson Seedless berry skin color, with treated fruit being darker, less uniform in color, and with a more yellow hue than non-treated fruit. Ethephon residues on Thompson Seedless grapes treated with the lower concentration of ethephon were below legal limits at harvest. Ethephon treatments also promoted abscission of Crimson Seedless berries, but pre-harvest abscission was much lower (≅49%) in Crimson Seedless compared to Thompson Seedless. Treated fruits were slightly darker than non-treated fruits, but ethephon did not affect SSC, acidity, or firmness of Crimson Seedless, and ethephon residues were below legal limits. PMID:27303407

  16. The effects of harvest on waterfowl populations

    Science.gov (United States)

    Cooch, Evan G.; Guillemain, Matthieu; Boomer, G Scott; Lebreton, Jean-Dominique; Nichols, James D.

    2014-01-01

    Change in the size of populations over space and time is, arguably, the motivation for much of pure and applied ecological research. The fundamental model for the dynamics of any population is straightforward: the net change in the abundance is the simple difference between the number of individuals entering the population and the number leaving the population, either or both of which may change in response to factors intrinsic and extrinsic to the population. While harvest of individuals from a population constitutes a clear extrinsic source of removal of individuals, the response of populations to harvest is frequently complex, reflecting an interaction of harvest with one or more population processes. Here we consider the role of these interactions, and factors influencing them, on the effective harvest management of waterfowl populations. We review historical ideas concerning harvest and discuss the relationship(s) between waterfowl life histories and the development and application of population models to inform harvest management. The influence of population structure (age, spatial) on derivation of optimal harvest strategies (with and without explicit consideration of various sources of uncertainty) is considered. In addition to population structure, we discuss how the optimal harvest strategy may be influenced by: 1) patterns of density-dependence in one or more vital rates, and 2) heterogeneity in vital rates among individuals within an age-sex-size class. Although derivation of the optimal harvest strategy for simple population models (with or without structure) is generally straightforward, there are several potential difficulties in application. In particular, uncertainty concerning the population structure at the time of harvest, and the ability to regulate the structure of the harvest itself, are significant complications. We therefore review the evidence of effects of harvest on waterfowl populations. Some of this evidence has

  17. Mucous retention cyst of the maxillary sinus.

    Science.gov (United States)

    Ruprecht, A; Batniji, S; el-Neweihi, E

    1986-12-01

    The mucous retention cyst is not a rare phenomenon. The incidence of dental patients was determined. Of 1685 patient radiographs reviewed, 44 (2.6%) had one or more mucous retention cysts in the maxillary sinuses.

  18. Incorporating hydrologic variability into nutrient spiraling

    Science.gov (United States)

    Doyle, Martin W.

    2005-09-01

    Nutrient spiraling describes the path of a nutrient molecule within a stream ecosystem, combining the biochemical cycling processes with the downstream driving force of stream discharge. To date, nutrient spiraling approaches have been hampered by their inability to deal with fluctuating flows, as most studies have characterized nutrient retention within only a small range of discharges near base flow. Here hydrologic variability is incorporated into nutrient spiraling theory by drawing on the fluvial geomorphic concept of effective discharge. The effective discharge for nutrient retention is proposed to be that discharge which, over long periods of time, is responsible for the greatest portion of nutrient retention. A developed analytical model predicts that the effective discharge for nutrient retention will equal the modal discharge for small streams or those with little discharge variability. As modal discharge increases or discharge variability increases, the effective discharge becomes increasingly less than the modal discharge. In addition to the effective discharge, a new metric is proposed, the functionally equivalent discharge, which is the single discharge that will reproduce the magnitude of nutrient retention generated by the full hydrologic frequency distribution when all discharge takes place at that rate. The functionally equivalent discharge was found to be the same as the modal discharge at low hydrologic variability, but increasingly different from the modal discharge at large hydrologic variability. The functionally equivalent discharge provides a simple quantitative means of incorporating hydrologic variability into long-term nutrient budgets.

  19. Bundling harvester; Harvennuspuun automaattisen nippukorjausharvesterin kehittaeminen

    Energy Technology Data Exchange (ETDEWEB)

    Koponen, K [Eko-Log Oy, Kuopio (Finland)

    1997-12-01

    The starting point of the project was to design and construct, by taking the silvicultural point of view into account, a harvesting and processing system especially for energy-wood, containing manually driven bundling harvester, automating of the harvester, and automated loading. The equipment forms an ideal method for entrepreneur`s-line harvesting. The target is to apply the system also for owner`s-line harvesting. The profitability of the system promotes the utilisation of the system in both cases. The objectives of the project were: to construct a test equipment and prototypes for all the project stages, to carry out terrain and strain tests in order to examine the usability and durability, as well as the capacity of the machine, to test the applicability of the Eko-Log system in simultaneous harvesting of energy and pulp woods, and to start the marketing and manufacturing of the products. The basic problems of the construction of the bundling harvester have been solved using terrain-tests. The prototype machine has been shown to be operable. Loading of the bundles to form sufficiently economically transportable loads has been studied, and simultaneously, the branch-biomass has been tried to be utilised without loosing the profitability of transportation. The results have been promising, and will promote the profitable utilisation of wood-energy. (orig.)

  20. An electroactive polymer energy harvester for wireless sensor networks

    International Nuclear Information System (INIS)

    McKay, T G; Rosset, S; Shea, H; Anderson, I A

    2013-01-01

    This paper reports the design, fabrication, and testing of a soft electroactive polymer power generator that has a volume of 1cm 3 . The generator provides an opportunity to harvest energy from environmental sources to power wireless sensor networks because it can harvest from low frequency motions, is compact, and lightweight. Electroactive polymers are highly stretchable variable capacitors. Electrical energy is produced when the deformation of a stretched, charged electroactive polymer is relaxed; like-charges are compressed together and opposite-charges are pushed apart, resulting in an increased voltage. Although electroactive polymers have impressively displayed energy densities as high as 550 mJ/g, they have been based on films with thicknesses of tens to hundreds of micrometers, thus a generator covering a large area would be required to provide useful power. Energy harvesters covering large areas are inconvenient to deploy in a wireless sensor network with a large number of nodes, so a generator that is compact in all three dimensions is required. In this work we fabricated a generator that can fit within a 11×11×9 mm envelope by stacking 42, 11mm diameter generator films on top of each other. When compressed cyclically at a rate of 0.5 Hz our generator produced 300 uW of power which is a sufficient amount of power for a low power wireless sensor node. The combination of our generator's small form factor and ability to harvest useful energy from low frequency motions provides an opportunity to deploy large numbers of wireless sensor nodes without the need for periodic, costly battery replacement

  1. Elemental composition at different points of the rainwater harvesting system

    International Nuclear Information System (INIS)

    Morrow, A.C.; Dunstan, R.H.; Coombes, P.J.

    2010-01-01

    Entry of contaminants, such as metals and non-metals, into rainwater harvesting systems can occur directly from rainfall with contributions from collection surfaces, accumulated debris and leachate from storage systems, pipes and taps. Ten rainwater harvesting systems on the east coast of Australia were selected for sampling of roof runoff, storage systems and tap outlets to investigate the variations in rainwater composition as it moved throughout the system, and to identify potential points of contribution to elemental loads. A total of 26 elements were screened at each site. Iron was the only element which was present in significantly higher concentrations in roof runoff samples compared with tank tap samples (P < 0.05). At one case study site, results suggested that piping and tap material can contribute to contaminant loads of harvested rainwater. Increased loads of copper were observed in hot tap samples supplied by the rainwater harvesting system via copper piping and a storage hot water system (P < 0.05). Similarly, zinc, lead, arsenic, strontium and molybdenum were significantly elevated in samples collected from a polyvinyl chloride pipe sampling point that does not supply household uses, compared with corresponding roof runoff samples (P < 0.05). Elemental composition was also found to vary significantly between the tank tap and an internal cold tap at one of the sites investigated, with several elements fluctuating significantly between the two outlets of interest at this site, including potassium, zinc, manganese, barium, copper, vanadium, chromium and arsenic. These results highlighted the variability in the elemental composition of collected rainwater between different study sites and between different sampling points. Atmospheric deposition was not a major contributor to the rainwater contaminant load at the sites tested. Piping materials, however, were shown to contribute significantly to the total elemental load at some locations.

  2. The start of the harvest

    CERN Multimedia

    2011-01-01

    The first major particle physics summer conference has just started this week in Grenoble. After the Quark-Matter conference, the Europhysics Conference on High-Energy Physics marks the start of a promising harvest for the LHC experiments.   For the first time, the collaborations will be presenting their latest results based on all luminosity taken until end of June, which will provide more precise measurements in many areas. Thanks to the excellent performance of the LHC, the experiments have already accumulated a substantial quantity of data allowing them to push back the known limits and refine measurements in many fields ranging from b physics to the search for the Higgs boson and for dark matter. At the time of writing, the LHC collaborations are about to present these new results in an energy range which has never previously been explored. I have congratulated all the teams involved in getting the LHC into operation in record time with great efficiency. Today I would like to acknowledge the...

  3. Harvesting yeast (Saccharomyces cerevisiae) at different physiological phases significantly affects its functionality in bread dough fermentation.

    Science.gov (United States)

    Rezaei, Mohammad N; Dornez, Emmie; Jacobs, Pieter; Parsi, Anali; Verstrepen, Kevin J; Courtin, Christophe M

    2014-05-01

    Fermentation of sugars into CO2, ethanol and secondary metabolites by baker's yeast (Saccharomyces cerevisiae) during bread making leads to leavening of dough and changes in dough rheology. The aim of this study was to increase our understanding of the impact of yeast on dough related aspects by investigating the effect of harvesting yeast at seven different points of the growth profile on its fermentation performance, metabolite production, and the effect on critical dough fermentation parameters, such as gas retention potential. The yeast cells harvested during the diauxic shift and post-diauxic growth phase showed a higher fermentation rate and, consequently, higher maximum dough height than yeast cells harvested in the exponential or stationary growth phase. The results further demonstrate that the onset of CO2 loss from fermenting dough is correlated with the fermentation rate of yeast, but not with the amount of CO2 that accumulated up to the onset point. Analysis of the yeast metabolites produced in dough yielded a possible explanation for this observation, as they are produced in different levels depending on physiological phase and in concentrations that can influence dough matrix properties. Together, our results demonstrate a strong effect of yeast physiology at the time of harvest on subsequent dough fermentation performance, and hint at an important role of yeast metabolites on the subsequent gas holding capacity. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. 76 FR 24089 - Credit Risk Retention

    Science.gov (United States)

    2011-04-29

    ... 17 CFR Part 246 Department of Housing and Urban Development 24 CFR Part 267 Credit Risk Retention... 2501-AD53 Credit Risk Retention AGENCIES: Office of the Comptroller of the Currency, Treasury (OCC..., Commission, FHFA, and HUD (the Agencies) are proposing rules to implement the credit risk retention...

  5. Energy harvesting from high-rise buildings by a piezoelectric harvester device

    International Nuclear Information System (INIS)

    Xie, X.D.; Wang, Q.; Wang, S.J.

    2015-01-01

    A novel piezoelectric technology of harvesting energy from high-rise buildings is developed. While being used to harness vibration energy of a building, the technology is also helpful to dissipate vibration of the building by the designed piezoelectric harvester as a tuned mass damper. The piezoelectric harvester device is made of two groups of series piezoelectric generators connected by a shared shaft. The shaft is driven by a linking rod hinged on a proof mass on the tip of a cantilever fixed on the roof of the building. The influences of some practical considerations, such as the mass ratio of the proof mass to the main structure, the ratios of the length and flexural rigidity of the cantilever to those of the main structure, on the root mean square (RMS) of the generated electric power and the energy harvesting efficiency of the piezoelectric harvester device are discussed. The research provides a new method for an efficient and practical energy harvesting from high-rise buildings by piezoelectric harvesters. - Highlights: • A new piezoelectric technology in energy harvesting from high-rise buildings is introduced. • A new mathematics model to calculate the energy harvested by the piezoelectric device is developed. • A novel efficient design of the piezoelectric harvester device in provided. • An electric power up to 432 MW under a seismic excitation at a frequency of 30 rad/s is achieved.

  6. Disentangling the effects of climate, density dependence, and harvest on an iconic large herbivore's population dynamics

    DEFF Research Database (Denmark)

    Koons, David; Colchero, Fernando; Hersey, Kent

    2015-01-01

    Understanding the relative effects of climate, harvest, and density dependence on population dynamics is critical for guiding sound population management, especially for ungulates in arid and semi-arid environments experiencing climate change. To address these issues for bison in southern Utah, we...... than precipitation and other temperature-related variables (model weight > 3 times more than that for other climate variables). Although we hypothesized that harvest is the primary driving force of bison population dynamics in southern Utah, our elasticity analysis indicated that changes in early...... spring temperature could have a greater ‘relative effect’ on equilibrium abundance than either harvest or the strength of density dependence. Our findings highlight the utility of incorporating elasticity analyses into state-space population models, and the need to include climatic processes in wildlife...

  7. Urinary retention and post-void residual urine in men: separating truth from tradition.

    Science.gov (United States)

    Kaplan, Steven A; Wein, Alan J; Staskin, David R; Roehrborn, Claus G; Steers, William D

    2008-07-01

    The definitions of acute and chronic urinary retention remain empirical and subject to wide interpretation. Standardized criteria have not been established and many questions remain unanswered. Moreover, the definition of significant post-void residual urine is unclear. We reviewed several aspects of urinary retention that require clarification with the objective of stimulating discussion among urologists to establish an accurate and coherent definition of urinary retention and significant post-void residual urine, and clarify risk factors. A MEDLINE search for articles written in English and published before April 2007 was done using a list of terms related to urinary retention. Articles not directly relevant to urinary retention or post-void residual urine were excluded. The term urinary retention lacks precise clinical or urodynamic meaning. Use of this term to describe a symptom, a sign, and a condition further complicates the issue. Many factors can contribute to the development of retention, including bladder outlet obstruction, detrusor underactivity, and neurogenic bladder conditions. Community based studies and clinical trials in patients with benign prostatic enlargement and/or lower urinary tract symptoms yield different estimates of the incidence of retention and only provide information on the epidemiology of acute urinary retention. However, age, previous retention episodes, lower urinary tract symptoms, chronic inflammation, serum prostate specific antigen level, prostate size, and urodynamic variables appear to be predictors of acute urinary retention. Alpha-receptor antagonists and 5alpha-reductase inhibitors may be useful in preventing urinary retention episodes and progressive benign prostatic enlargement. Clinical trials on the short-term use of antimuscarinics have not provided evidence that these agents increase the risk of retention; data on longer term administration are needed. Clinicians are adopting less invasive approaches (eg

  8. Deuterium retention in liquid lithium

    International Nuclear Information System (INIS)

    Baldwin, M.J.; Doerner, R.P.; Luckhardt, S.C.; Conn, R.W.

    2002-01-01

    Measurements of deuterium retention in samples of lithium exposed in the liquid state to deuterium plasma are reported. Retention was measured as a function of plasma ion dose in the range 6x10 19 -4x10 22 D atoms and exposure temperature between 523 and 673 K using thermal desorption spectrometry. The results are consistent with the full uptake of all deuterium ions incident on the liquid metal surface and are found to be independent of the temperature of the liquid lithium over the range explored. Full uptake, consistent with very low recycling, continues until the sample is volumetrically converted to lithium deuteride. This occurs for exposure temperatures where the gas pressure during exposure was both below and slightly above the corresponding decomposition pressure for LiD in Li. (author)

  9. Krypton retention on solid adsorbents

    International Nuclear Information System (INIS)

    Monson, P.R. Jr.

    1982-01-01

    An experimental laboratory program was conducted to develop economical solid adsorbents for the retention of krypton from a dissolver off-gas stream. The study indicates that a solid adsorbent system is feasible and competitive with other developing systems which utilize fluorocarbon absorption nd cryogenic distillation. This technology may have potential applications not only in nuclear fuel reprocessing plants, but also in nuclear reactors and in environmental monitoring. Of the 13 prospective adsorbents evaluated with respect to adsorption capacity and cost, the commercially available hydrogen mordenite was the most cost-effective material at subambient temperatures (-40 0 to -80 0 C). Silver mordenite has a higher capacity for krypton retention, but is 50 times more expensive than hydrogen mordenite

  10. Factors Affecting Customer Retention in the Airline Industry

    Directory of Open Access Journals (Sweden)

    Raghda Climis

    2017-01-01

    Full Text Available Purpose: This study empirically investigated the factors that affect customer retention in the airline industry in North Cyprus. These factors were service quality attributes, perceived safety, customer satisfaction, loyalty reward program, relationship commitment and customer loyalty. The study also investigated four different groups for purposes of travel (business, education, vacation and family visit in the empirical model. Methodology: A descriptive approach was chosen to conduct this research. A quanhip between customer retention and the related study factors; however, not all of these relations are signifcant. The results also showed that the different purposes of travel had different influences on the variables regarding the positive and signifcant relations between them. Some independent variables had a negative effect on the dependent variables. Conclusions: This research was limited to one group and place: the students of Eastern Mediterranean University in North Cyprus. Originality: This study connected the retention, loyalty, satisfaction and service quality factors as attributes. In addition, this research was the frst to include other independent factors affecting satisfaction and loyalty in a comparison between four different groups regarding the purpose of travel in the airline industry.

  11. Harvest time and post-harvest quality of Fuyu persimmon treated before harvest with gibberellic acid and aminoetoxyvinilglycine

    Directory of Open Access Journals (Sweden)

    Ricardo Antonio Ayub

    2008-12-01

    Full Text Available The aim of this work was to evaluate the effects of gibberellic acid (GA3 and aminoetoxyvinilglycine (AVG applied in preharvest spraying, on the retardation of the harvest and on the quality of persimmon fruits cv. Fuyu. The experiment was carried in randomized complete block design. The treatments were: control, 136mgL-1 of AVG, 272 mgL-1 of AVG, 36mgL-1 of GA3, 72mgL-1 of GA3 and 136mgL-1 of AVG + 36mgL-1 of GA3, spraying 30 days before the first harvest. The fruits were harvested twice and stored at 4ºC. The chemical and physical evaluations of the fruits were carried out the date of the harvest and at intervals of 15 days followed by four days at 20ºC. In conclusion, the application of AVG (136mgL-1 or GA3 (72mgL-1 maintained the firmness of the fruits and delayed harvest by twenty days. However, fruits harvested in the initial state of ripening were more sensitive to chilling injury and were unable to support 15 days of storage at 4ºC. The plant growth regulators were not efficient in prolonged storage due to the fact that the concentration of sugars was lower in the treatments than in the control.

  12. Estimating water retention curves for sandy soils at the Doñana National Park, SW Spain

    Science.gov (United States)

    The determination of soil water retention curves (SWRC) in the laboratory is a slow and tedious task, which is especially challenging for sandy soils due to their low water retention capacity and large water content changes for small pressure head differences. Due to spatial variability within larg...

  13. Harvesting Adaptation to Biodiversity Conservation in Sawmill Industry: Technology Innovation and Monitoring Program

    Directory of Open Access Journals (Sweden)

    Guillermo J. Martínez Pastur

    2007-09-01

    Full Text Available Social demands related to native forest ecosystems are based on an efficient management, with a balance between conservation and timber production. This paper describes the industry adaptation to a biodiversity program with an alternative regeneration method. The proposed method leaves 30% of the timber-quality forest as aggregated retention and 15 m² ha-1 basal area as dispersed retention. While many costs increased considerably, the incomes also may increase by applying new management strategies and technology innovation. A monitoring program was established in the harvested stands to evaluate the ecological functionality of the applied regeneration system (forest structure, climate change, regeneration dynamics, habitat quality and abiotic cycles. The implementation of an innovated technology and monitoring program in the forest and industry determined a balance between economic values and biodiversity conservation.

  14. Plunger with simple retention valve

    International Nuclear Information System (INIS)

    Fekete, A.V.

    1987-01-01

    This patent describes a positive displacement retention valve apparatus in which the actual flow equals the theoretical maximum flow through the retention valve. The apparatus includes, in combination, a confined fluid flow conduit, a piston adapted for reciprocal movement within the fluid flow conduit between upstream and downstream limit positions, piston reciprocating means, and pressure responsive check valve means located upstream with respect to the piston in the fluid flow conduit. The pressure responsive check valve means operable to permit fluid flow therethrough in a downstream direction toward the piston, and to preclude fluid flow therethrough in an opposite direction. The piston is composed of parts which are relatively movable with respect to one another. The piston includes a simple retention valve consisting of a plug means, a cylinder having a minimum and a maximum internal cross section flow area therein and being reciprocal within the confined fluid flow conduit, and a seat on the cylinder for the plug means. The piston reciprocating means are operatively connected to the plug means

  15. Simulated long-term effects of varying tree retention on wood production, dead wood and carbon stock changes.

    Science.gov (United States)

    Santaniello, Francesca; Djupström, Line B; Ranius, Thomas; Weslien, Jan; Rudolphi, Jörgen; Sonesson, Johan

    2017-10-01

    Boreal forests are an important source of timber and pulp wood, but provide also other products and services. Utilizing a simulation program and field data from a tree retention experiment in a Scots pine forest in central Sweden, we simulated the consequences during the following 100 years of various levels of retention on production of merchantable wood, dead wood input (as a proxy for biodiversity), and carbon stock changes. At the stand level, wood production decreased with increased retention levels, while dead wood input and carbon stock increased. We also compared 12 scenarios representing a land sharing/land sparing gradient. In each scenario, a constant volume of wood was harvested with a specific level of retention in a 100-ha landscape. The area not needed to reach the defined volume was set-aside during a 100-year rotation period, leading to decreasing area of set-asides with increasing level of retention across the 12 scenarios. Dead wood input was positively affected by the level of tree retention whereas the average carbon stock decreased slightly with increasing level of tree retention. The scenarios will probably vary in how they favor species preferring different substrates. Therefore, we conclude that a larger variation of landscape-level conservation strategies, also including active creation of dead wood, may be an attractive complement to the existing management. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Injuries from non-retention in gillnet fisheries suppress reproductive maturation in escaped fish.

    Science.gov (United States)

    Baker, Matthew R; Swanson, Penny; Young, Graham

    2013-01-01

    Exploitation of fisheries resources has unintended consequences, not only in the bycatch and discard of non-target organisms, but also in damage to targeted fish that are injured by gear but not landed (non-retention). Delayed mortality due to non-retention represents lost reproductive potential in exploited stocks, while not contributing to harvest. Our study examined the physiological mechanisms by which delayed mortality occurs and the extent to which injuries related to disentanglement from commercial gear compromise reproductive success in spawning stocks of Pacific salmon (Oncorhynchus spp.). We found evidence for elevated stress in fish injured via non-retention in gillnet fisheries. Plasma cortisol levels correlated with the severity of disentanglement injury and were elevated in fish that developed infections related to disentanglement injuries. We also analyzed sex steroid concentrations in females (estradiol-17β and 17,20β-dihydroxy-4-pregnen-3-one) to determine whether non-retention impairs reproductive potential in escaped individuals. We demonstrate evidence for delayed or inhibited maturation in fish with disentanglement injuries. These findings have important implications for effective conservation and management of exploited fish stocks and suggest means to improve spawning success in such stocks if retention in commercial fisheries is improved and incidental mortality reduced.

  17. Injuries from non-retention in gillnet fisheries suppress reproductive maturation in escaped fish.

    Directory of Open Access Journals (Sweden)

    Matthew R Baker

    Full Text Available Exploitation of fisheries resources has unintended consequences, not only in the bycatch and discard of non-target organisms, but also in damage to targeted fish that are injured by gear but not landed (non-retention. Delayed mortality due to non-retention represents lost reproductive potential in exploited stocks, while not contributing to harvest. Our study examined the physiological mechanisms by which delayed mortality occurs and the extent to which injuries related to disentanglement from commercial gear compromise reproductive success in spawning stocks of Pacific salmon (Oncorhynchus spp.. We found evidence for elevated stress in fish injured via non-retention in gillnet fisheries. Plasma cortisol levels correlated with the severity of disentanglement injury and were elevated in fish that developed infections related to disentanglement injuries. We also analyzed sex steroid concentrations in females (estradiol-17β and 17,20β-dihydroxy-4-pregnen-3-one to determine whether non-retention impairs reproductive potential in escaped individuals. We demonstrate evidence for delayed or inhibited maturation in fish with disentanglement injuries. These findings have important implications for effective conservation and management of exploited fish stocks and suggest means to improve spawning success in such stocks if retention in commercial fisheries is improved and incidental mortality reduced.

  18. Analytical coupled modeling of a magneto-based acoustic metamaterial harvester

    Science.gov (United States)

    Nguyen, H.; Zhu, R.; Chen, J. K.; Tracy, S. L.; Huang, G. L.

    2018-05-01

    Membrane-type acoustic metamaterials (MAMs) have demonstrated unusual capacity in controlling low-frequency sound transmission, reflection, and absorption. In this paper, an analytical vibro-acoustic-electromagnetic coupling model is developed to study MAM harvester sound absorption, energy conversion, and energy harvesting behavior under a normal sound incidence. The MAM harvester is composed of a prestressed membrane with an attached rigid mass, a magnet coil, and a permanent magnet coin. To accurately capture finite-dimension rigid mass effects on the membrane deformation under the variable magnet force, a theoretical model based on the deviating acoustic surface Green’s function approach is developed by considering the acoustic near field and distributed effective shear force along the interfacial boundary between the mass and the membrane. The accuracy and capability of the theoretical model is verified through comparison with the finite element method. In particular, sound absorption, acoustic-electric energy conversion, and harvesting coefficient are quantitatively investigated by varying the weight and size of the attached mass, prestress and thickness of the membrane. It is found that the highest achievable conversion and harvesting coefficients can reach up to 48%, and 36%, respectively. The developed model can serve as an efficient tool for designing MAM harvesters.

  19. Adaptive learning algorithms for vibration energy harvesting

    International Nuclear Information System (INIS)

    Ward, John K; Behrens, Sam

    2008-01-01

    By scavenging energy from their local environment, portable electronic devices such as MEMS devices, mobile phones, radios and wireless sensors can achieve greater run times with potentially lower weight. Vibration energy harvesting is one such approach where energy from parasitic vibrations can be converted into electrical energy through the use of piezoelectric and electromagnetic transducers. Parasitic vibrations come from a range of sources such as human movement, wind, seismic forces and traffic. Existing approaches to vibration energy harvesting typically utilize a rectifier circuit, which is tuned to the resonant frequency of the harvesting structure and the dominant frequency of vibration. We have developed a novel approach to vibration energy harvesting, including adaptation to non-periodic vibrations so as to extract the maximum amount of vibration energy available. Experimental results of an experimental apparatus using an off-the-shelf transducer (i.e. speaker coil) show mechanical vibration to electrical energy conversion efficiencies of 27–34%

  20. Allogeneic Peripheral Blood Stem Cell Harvest

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Allogeneic Peripheral Blood Stem Cell Harvest. Mobilization protocol. G-CSF 10 mcg/Kg / day for 5 days. Pheresis. Cobe Spectra; Haemonetics mcs+. Enumeration. CD34 counts; Cfu-GM assays.

  1. Pennsylvania Academic Libraries and Student Retention and Graduation: A Preliminary Investigation with Confusing Results

    Directory of Open Access Journals (Sweden)

    Gregory A. Crawford

    2014-11-01

    Full Text Available This study examined the relationships between specific institutional financial variables and two library-related variables on graduation and retention rates for colleges and universities through correlations and multiple regression analysis. The analyses used data for Pennsylvania colleges and universities that were extracted from the Integrated Postsecondary Educational Data System (IPEDS and the Academic Libraries Survey (ALS.  All analyses were run using IBM SPSS software. The correlations showed that both library expenses per student and library use per student were significantly correlated with both graduation and retention rates. In contrast, the multiple regression results showed that neither library budgets nor library use had significant effects on either graduation rates or retention rates. As would be expected, instructional expenses per student had the highest correlation with both graduation and retention and also yielded the strongest coefficient in the resulting regression equations.

  2. Relations between zero-inflated variables in trials with horticultural crops

    Directory of Open Access Journals (Sweden)

    Alessandro D. Lúcio

    2016-06-01

    Full Text Available Certain characteristics of some vegetable crops allow multiple harvests during the production cycle; however, to our knowledge, no study has described the behavior of fruit production with progression of the production cycle in vegetable crops with multiple harvests that present data overdispersion. We aimed to characterize the data overdispersion of zero-inflated variables and identify the behavior of these variables during the production cycle of several vegetable crops with multiple harvests. Data from 11 uniformity trials were used without applying treatments; these comprise the database from the Experimental Plants Group at the Federal University of Santa Maria, Brazil. The trials were conducted using four horticultural species grown during different cultivation seasons, cultivation environments, and experimental structures. Although at each harvest, a larger number of basic units with harvest fruit was observed than units without harvest fruit, the basic unit percentage without fruit was high, generating an overdispersion within each individual harvest. The variability within each harvest was high and increased with the evolution of the production cycle of Capsicum annuum, Solanum lycopersicum var. cerasiforme, Phaseolus vulgaris, and Cucurbita pepo species. However, the correlation coefficient between the mean weight and number of harvest fruits tended to remain constant during the crop production cycle. These behaviors show that harvest management should be done individually, at each harvest, such that data overdispersion is reduced.

  3. Relations between zero-inflated variables in trials with horticultural crops

    Energy Technology Data Exchange (ETDEWEB)

    Lúcio, A.D.; Nunes, L.F.; Rego, F.; Pasini, M.P.B.

    2016-11-01

    Certain characteristics of some vegetable crops allow multiple harvests during the production cycle; however, to our knowledge, no study has described the behavior of fruit production with progression of the production cycle in vegetable crops with multiple harvests that present data overdispersion. We aimed to characterize the data overdispersion of zero-inflated variables and identify the behavior of these variables during the production cycle of several vegetable crops with multiple harvests. Data from 11 uniformity trials were used without applying treatments; these comprise the database from the Experimental Plants Group at the Federal University of Santa Maria, Brazil. The trials were conducted using four horticultural species grown during different cultivation seasons, cultivation environments, and experimental structures. Although at each harvest, a larger number of basic units with harvest fruit was observed than units without harvest fruit, the basic unit percentage without fruit was high, generating an overdispersion within each individual harvest. The variability within each harvest was high and increased with the evolution of the production cycle of Capsicum annuum, Solanum lycopersicum var. cerasiforme, Phaseolus vulgaris, and Cucurbita pepo species. However, the correlation coefficient between the mean weight and number of harvest fruits tended to remain constant during the crop production cycle. These behaviors show that harvest management should be done individually, at each harvest, such that data overdispersion is reduced. (Author)

  4. Assessment of nutrient retention by Natete wetland Kampala, Uganda

    Science.gov (United States)

    Kanyiginya, V.; Kansiime, F.; Kimwaga, R.; Mashauri, D. A.

    Natete wetland which is located in a suburb of Kampala city in Uganda is dominated by C yperus papyrus and covers an area of approximately 1 km 2. The wetland receives wastewater and runoff from Natete town which do not have a wastewater treatment facility. The main objective of this study was to assess nutrient retention of Natete wetland and specifically to: determine the wastewater flow patterns in the wetland; estimate the nutrient loads into and out of the wetland; determine the nutrient retention by soil, plants and water column in the wetland; and assess the above and belowground biomass density of the dominant vegetation. Soil, water and plant samples were taken at 50 m intervals along two transects cut through the wetland; soil and water samples were taken at 10 cm just below the surface. Physico-chemical parameters namely pH, electrical conductivity and temperature were measured in situ. Water samples were analyzed in the laboratory for ammonium-nitrogen, nitrate-nitrogen, total nitrogen, orthophosphate and total phosphorus. Electrical conductivity ranged between 113 μS/cm and 530 μS/cm and the wastewater flow was concentrated on the eastern side of the wetland. pH varied between 6 and 7, temperature ranged from 19 °C to 24 °C. NH 4-N, NO 3-N, and TN concentrations were retained by 21%, 98%, and 35% respectively. Phosphorus concentration was higher at the outlet of the wetland possibly due to release from sediments and leaching. Nutrient loads were higher at the inlet (12,614 ± 394 kgN/day and 778 ± 159 kgP/day) than the outlet (2368 ± 425 kgN/day and 216 ± 56 kgP/day) indicating retention by the wetland. Plants stored most nutrients compared to soil and water. The belowground biomass of papyrus vegetation in the wetland was higher (1288.4 ± 8.3 gDW/m 2) than the aboveground biomass (1019.7 ± 13.8 gDW/m 2). Plant uptake is one of the important routes of nutrient retention in Natete wetland. It is recommended that harvesting papyrus can be an

  5. Energy harvesting with functional materials and microsystems

    CERN Document Server

    Bhaskaran, Madhu; Iniewski, Krzysztof

    2013-01-01

    For decades, people have searched for ways to harvest energy from natural sources. Lately, a desire to address the issue of global warming and climate change has popularized solar or photovoltaic technology, while piezoelectric technology is being developed to power handheld devices without batteries, and thermoelectric technology is being explored to convert wasted heat, such as in automobile engine combustion, into electricity. Featuring contributions from international researchers in both academics and industry, Energy Harvesting with Functional Materials and Microsystems explains the growi

  6. Dust emissions eliminated in pneumatic harvesting

    International Nuclear Information System (INIS)

    Kallio, M.

    1998-01-01

    Pneumatic harvesting is the most efficient milled peat production method in unsteady weather conditions. In good summers, the best contractors harvest more than 1 000 m 3 /ha milled peat from suitable production fields. The greatest problem of the method is caused by dust emissions, in particular in fields close to settled areas. About 15 % of Finland's present peat production is collected using pneumatic harvesters. A pneumatic harvester with smaller dust emissions has been developed by VTT Energy and Vapo Oy. The wagon is based on two-stage separation of peat. The main part of the coarser milled peat is first separated, e.g. in a settling chamber, and fine dry peat dust in correctly dimensioned side by side cyclones. The first series of pneumatic harvesters based on the new separation technology was employed in summer 1996. Besides decreasing the dust emissions the harvesting capacity of the new equipment was increased. The collection capacity of the pneumatic harvester can be made more effective by enlarging the container size, be decreasing the weight, by increasing the driving speed and by developing the suction capacity. Using lighter and durable construction materials combined with advanced design lighter and stronger pneumatic harvesters have been constructed. Nozzles and their mounting have also been developed. In the improvement of nozzles, the former studies with pneumatic simulator of VTT Energy, have been of great help. Studies with the pneumatic simulator and field conditions have been made in collaboration with Turveruukki Oy, Turvemetalli Oy, Raussin Metalli Oy and Vapo Oy, as well as VNIITP of St. Petersburg, Russia

  7. HYBRID POWER HARVESTER USING ENGINE SOURCE

    OpenAIRE

    Meeran Mydeen, A.Ahmed; Inasu, Kelwin; Venkatesh, M.; Suthesh, C.

    2017-01-01

    In mainly we present a compact, multisource and battery-free energy harvesting from engine source. This battery free generator captures energy from its environment transient thermal gradients as a main source, and vibration as a secondary source allowing early biasing of the generator and stores this energy in ultra-capacitors .In this way, this multi-source architecture benefits from the synergy between energy scavenging and harvesting.

  8. Autotransplantation donor tooth site harvesting using piezosurgery

    OpenAIRE

    Ylikontiola, Leena P.; S?ndor, George K.

    2016-01-01

    Abstract Background: The harvesting of a tooth as a candidate for tooth autotransplantation requires that the delicate dental tissues around the tooth be minimally traumatized. This is especially so for the periradicular tissues of the tooth root and the follicular tissues surrounding the crown. The aim of this report is to describe the use of piezosurgery as an attempt at morbidity reduction in the harvesting of teeth for autotransplantation. Methods: A piezosurgical handpiece and its ...

  9. Dielectric loss against piezoelectric power harvesting

    International Nuclear Information System (INIS)

    Liang, Junrui; Shu-Hung Chung, Henry; Liao, Wei-Hsin

    2014-01-01

    Piezoelectricity is one of the most popular electromechanical transduction mechanisms for constructing kinetic energy harvesting systems. When a standard energy harvesting (SEH) interface circuit, i.e., bridge rectifier plus filter capacitor, is utilized for collecting piezoelectric power, the previous literature showed that the power conversion can be well predicted without much consideration for the effect of dielectric loss. Yet, as the conversion power gets higher by adopting power-boosting interface circuits, such as synchronized switch harvesting on inductor (SSHI), the neglect of dielectric loss might give rise to deviation in harvested power estimation. Given the continuous progress on power-boosting interface circuits, the role of dielectric loss in practical piezoelectric energy harvesting (PEH) systems should receive attention with better evaluation. Based on the integrated equivalent impedance network model, this fast track communication provides a comprehensive study on the susceptibility of harvested power in PEH systems under different conditions. It shows that, dielectric loss always counteracts piezoelectric power harvesting by causing charge leakage across piezoelectric capacitance. In particular, taking corresponding ideal lossless cases as references, the counteractive effect might be aggravated under one of the five conditions: larger dielectric loss tangent, lower vibration frequency, further away from resonance, weaker electromechanical coupling, or using power-boosting interface circuit. These relationships are valuable for the study of PEH systems, as they not only help explain the role of dielectric loss in piezoelectric power harvesting, but also add complementary insights for material, structure, excitation, and circuit considerations towards holistic evaluation and design for practical PEH systems. (fast track communications)

  10. Mechanised harvesting of short-rotation coppices

    OpenAIRE

    Vanbeveren, Stefan P.P.; Spinelli, Raffaele; Eisenbies, Mark; Schweier, Janine; Mola-Yudego, Blas; Magagnotti, Natascia; Acuna, Mauricio; Dimitriou, Ioannis; Ceulemans, Reinhart

    2017-01-01

    Abstract: Short-rotation coppice (SRC) is an important source of woody biomass for bioenergy. Despite the research carried out on several aspects of SRC production, many uncertainties create barriers to farmers establishing SRC plantations. One of the key economic sources of uncertainty is harvesting methods and costs; more specifically, the performance of contemporary machine methods is reviewed. We collected data from 25 literature references, describing 166 field trials. Three harvesting s...

  11. Uncovering client retention antecedents in service organizations

    Directory of Open Access Journals (Sweden)

    Mari Jansen van Rensburg

    2014-01-01

    Full Text Available This paper develops a multi-dimensional model of retention to provide a more complete and integrated view of client retention and its determinants in service contexts. To uncover the antecedents of client retention, social and economic exchanges were reviewed under the fundamental ideas of the Social Exchange Theory. Findings from a survey of senior South African advertising executives suggest that client retention is the result of evaluative as well as relational factors that can influence client responses. Despite contractual obligations, advertisers are willing to pay the costs and make the sacrifices of switching should their expectations be unmet. An important contribution of this study is the use of multi-item scales to measure retention. The model developed provides valuable insight to agencies on client retention management and the optimal allocation of resources for maximum customer equity. This model may also be applied to other service organisations to provide insight to client retention.

  12. Harvest traffic monitoring and soil physical response in a pine plantation

    Science.gov (United States)

    Emily A. Carter; Timothy P. McDonald; John L. Torbert

    2000-01-01

    Mechanized forest harvest operations induce changes in soil physical properties, which have the potential to impact soil sustainability and forest productivity. The assessment of soil compaction and its spatial variability has been determined previously through the identification and tabulation of visual soil disturbance classes and soil physical changes associated...

  13. Design, modeling, fabrication and characterization of an electret-based MEMS electrostatic energy harvester

    NARCIS (Netherlands)

    Altena, G.; Hohlfeld, D.; Elfrink, R.; Goedbloed, M.H.; Schaijk, R. van

    2011-01-01

    This paper reports on the design, modelling, fabrication and characterization of an electret-based MEMS electrostatic energy harvester with an elegant and robust process flow. The fabrication is based on a SOI wafer with self-aligned electrodes of the variable capacitor. The output current of the

  14. IAD value at harvest as a predictor for ‘Anjou’ fruit storage performance

    Science.gov (United States)

    Anjou pears produced in the PNW are single picked and can have considerable fruit maturity variability at harvest. Assessment of chlorophyll in and several mm below the peel using differential absorbance (IAD) is a means to identify populations of fruit of varying maturity within single trees. Thi...

  15. Hybrid energy harvesting using active thermal backplane

    Science.gov (United States)

    Kim, Hyun-Wook; Lee, Dong-Gun

    2016-04-01

    In this study, we demonstrate the concept of a new hybrid energy harvesting system by combing solar cells with magneto-thermoelectric generator (MTG, i.e., thermal energy harvesting). The silicon solar cell can easily reach high temperature under normal operating conditions. Thus the heated solar cell becomes rapidly less efficient as the temperature of solar cell rises. To increase the efficiency of the solar cell, air or water-based cooling system is used. To surpass conventional cooling devices requiring additional power as well as large working space for air/water collectors, we develop a new technology of pairing an active thermal backplane (ATB) to solar cell. The ATB design is based on MTG technology utilizing the physics of the 2nd order phase transition of active ferromagnetic materials. The MTG is cost-effective conversion of thermal energy to electrical energy and is fundamentally different from Seebeck TEG devices. The ATB (MTG) is in addition to being an energy conversion system, a very good conveyor of heat through both conduction and convection. Therefore, the ATB can provide dual-mode for the proposed hybrid energy harvesting. One is active convective and conductive cooling for heated solar cell. Another is active thermal energy harvesting from heat of solar cell. These novel hybrid energy harvesting device have potentially simultaneous energy conversion capability of solar and thermal energy into electricity. The results presented can be used for better understanding of hybrid energy harvesting system that can be integrated into commercial applications.

  16. Improving Vibration Energy Harvesting Using Dynamic Magnifier

    Directory of Open Access Journals (Sweden)

    Almuatasim Alomari

    2016-01-01

    Full Text Available This paper reports on the design and evaluation of vibration-based piezoelectric energy-harvesting devices based on a polyvinylidene fluoride unimorph cantilever beam attached to the front of a dynamic magnifier. Experimental studies of the electromechanical frequency response functions are studied for the first three resonance frequencies. An analytical analysis is undertaken by applying the chain matrix in order to predict output voltage and output power with respect to the vibration frequency. The proposed harvester was modeled using MATLAB software and COMSOL multi- physics to study the mode shapes and electrical output parameters. The voltage and power output of the energy harvester with a dynamic magnifier was 2.62 V and 13.68 mW, respectively at the resonance frequency of the second mode. The modeling approach provides a basis to design energy harvesters exploiting dynamic magnification for improved performance and bandwidth. The potential application of such energy harvesting devices in the transport sector include autonomous structural health monitoring systems that often include embedded sensors, data acquisition, wireless communication, and energy harvesting systems.

  17. Vibration energy harvesting using the Halbach array

    International Nuclear Information System (INIS)

    Zhu, Dibin; Beeby, Steve; Tudor, John; Harris, Nick

    2012-01-01

    This paper studies the feasibility of vibration energy harvesting using a Halbach array. A Halbach array is a specific arrangement of permanent magnets that concentrates the magnetic field on one side of the array while cancelling the field to almost zero on the other side. This arrangement can improve electromagnetic coupling in a limited space. The Halbach array offers an advantage over conventional layouts of magnets in terms of its concentrated magnetic field and low-profile structure, which helps improve the output power of electromagnetic energy harvesters while minimizing their size. Another benefit of the Halbach array is that due to the existence of an almost-zero magnetic field zone, electronic components can be placed close to the energy harvester without any chance of interference, which can potentially reduce the overall size of a self-powered device. The first reported example of a low-profile, planar electromagnetic vibration energy harvester utilizing a Halbach array was built and tested. Results were compared to ones for energy harvesters with conventional magnet layouts. By comparison, it is concluded that although energy harvesters with a Halbach array can have higher magnetic field density, a higher output power requires careful design in order to achieve the maximum magnetic flux gradient. (paper)

  18. The grit effect: predicting retention in the military, the workplace, school and marriage

    OpenAIRE

    Eskreis-Winkler, Lauren; Shulman, Elizabeth P.; Beal, Scott A.; Duckworth, Angela L.

    2014-01-01

    Remaining committed to goals is necessary (albeit not sufficient) to attaining them, but very little is known about domain-general individual differences that contribute to sustained goal commitment. The current investigation examines the association between grit, defined as passion and perseverance for long-term goals, other individual difference variables, and retention in four different contexts: the military, workplace sales, high school, and marriage. Grit predicted retention over and ...

  19. Pengaruh Customer Satisfaction terhadap Customer Retention (Survei Pelanggan J.co Donut & Coffee Malang)

    OpenAIRE

    Tanjung, Andhika; Sanawiri, Brillyanes

    2017-01-01

    This research aims to identify influence of Customer Satisfaction, to Customer Retention. The independent varible in this research are Customer Satsisfaction (X), with the dependent variable Customer Retention (Y). The type of research is explanatory research with quantitative approach. The object of research is the customer J.Co Donut & Coffee with minimum purchase at least 2 times. The sampling after selectes by purposive sampling tehcnique is as many as 116 people of respondents. The d...

  20. Structure–performance relationships for cantilever-type piezoelectric energy harvesters

    International Nuclear Information System (INIS)

    Cho, Kyung-Hoon; Park, Hwi-Yeol; Heo, Jin S.; Priya, Shashank

    2014-01-01

    This study provides comprehensive analysis of the structure–performance relationships in cantilever-type piezoelectric energy harvesters. It provides full understanding of the effect of all the practical global control variables on the harvester performance. The control variables considered for the analysis were material parameters, areal and volumetric dimensions, and configuration of the inactive and active layers. Experimentally, the output power density of the harvester was maximum when the shape of the beam was close to a square for a constant bending stiffness and a fixed beam area. Through analytical modeling of the effective stiffness for the piezoelectric bimorph, the conditions for enhancing the bending stiffness within the same beam volume as that of a conventional bimorph were identified. The harvester configuration with beam aspect ratio of 0.86 utilizing distributed inactive layers exhibited an giant output power of 52.5 mW and power density of 28.5 mW cm −3 at 30 Hz under 6.9 m s −2 excitation. The analysis further indicates that the trend in the output power with varying damping ratio is dissimilar to that of the efficiency. In order to realize best performance, the harvester should be designed with respect to maximizing the magnitude of output power.

  1. Repeatibility of agroindustrial characters in sugarcane in different harvest cycles

    Directory of Open Access Journals (Sweden)

    Hudsonkléio Da Costa Silva

    Full Text Available ABSTRACT In commercial cultivation of sugarcane, knowledge about the repetition of agroindustrial characters is essential to identify long-lived genotypes in production cycles, which when selected, will contribute to the significant increase in productivity. This work evaluated the agroindustrial performance of 16 sugarcane genotypes in the sugarcane microregion Litoral Norte of Pernambuco in four harvest cycles and the regularity in the repetition of characters. The experiment was conducted in the agricultural area of São José sugar mill, Igarassu, state of Pernambuco, Brazil. The experiment was carried out following a randomized block design with four replications. The variables evaluated were: tons of POL per hectare (TPH, tons of cane per hectare (TCH, fiber (FIB, adjusted POL% (PCC, soluble solids content (BRIX, and total recoverable sugar (TRS. The variance analysis detected significant differences among the genotypes along the four harvest seasons, indicating genetic variability and possibility of success in the selection of superior genotypes. Estimates of repeatability coefficient point to regularity in the repetition of agro-industrial characteristics allowing to identify genotypes with the highest longevity. The genotypes SP79-1011, RB863129, RB92579, RB813804, RB982559 e RB982613 presented best agroindustrial performance, and two evaluations based on TPH and TCH characters are enough to select superior genotypes with 90% predictability of their actual values.

  2. Production economics of harvesting young hardwood stands in central Appalachia

    Science.gov (United States)

    Yaoxiang Li; Jingxin Wang; Gary W. Miller; Joe McNeel

    2004-01-01

    Three harvesting systems of chainsaw/cable skidder, fell-buncher/grapple skidder, and harvester/forwarder were simulated in harvesting three hardwood stands of 30 to 50 years old in central Appalachia. Stands were generated by using a stand generator and harvesting prescriptions included clearcut, shelterwood cut, selective cut, diameter limit cut, and crop tree...

  3. Smart multi-application energy harvester using Arduino | Rizman ...

    African Journals Online (AJOL)

    This paper presents a Smart Multi-App Harvester Energy Using Arduino for energy harvesting. The system consists of a few mechanical parts such as solar, thermal plate and dynamo (for kinetic) to harvest the energy. The objectives of the project are to harvest the wasted energy from the mechanical parts and used it as a ...

  4. Incorporating harvest rates into the sex-age-kill model for white-tailed deer

    Science.gov (United States)

    Norton, Andrew S.; Diefenbach, Duane R.; Rosenberry, Christopher S.; Wallingford, Bret D.

    2013-01-01

    Although monitoring population trends is an essential component of game species management, wildlife managers rarely have complete counts of abundance. Often, they rely on population models to monitor population trends. As imperfect representations of real-world populations, models must be rigorously evaluated to be applied appropriately. Previous research has evaluated population models for white-tailed deer (Odocoileus virginianus); however, the precision and reliability of these models when tested against empirical measures of variability and bias largely is untested. We were able to statistically evaluate the Pennsylvania sex-age-kill (PASAK) population model using realistic error measured using data from 1,131 radiocollared white-tailed deer in Pennsylvania from 2002 to 2008. We used these data and harvest data (number killed, age-sex structure, etc.) to estimate precision of abundance estimates, identify the most efficient harvest data collection with respect to precision of parameter estimates, and evaluate PASAK model robustness to violation of assumptions. Median coefficient of variation (CV) estimates by Wildlife Management Unit, 13.2% in the most recent year, were slightly above benchmarks recommended for managing game species populations. Doubling reporting rates by hunters or doubling the number of deer checked by personnel in the field reduced median CVs to recommended levels. The PASAK model was robust to errors in estimates for adult male harvest rates but was sensitive to errors in subadult male harvest rates, especially in populations with lower harvest rates. In particular, an error in subadult (1.5-yr-old) male harvest rates resulted in the opposite error in subadult male, adult female, and juvenile population estimates. Also, evidence of a greater harvest probability for subadult female deer when compared with adult (≥2.5-yr-old) female deer resulted in a 9.5% underestimate of the population using the PASAK model. Because obtaining

  5. Gaseous mercury fluxes from forest soils in response to forest harvesting intensity: A field manipulation experiment

    International Nuclear Information System (INIS)

    Mazur, M.; Mitchell, C.P.J.; Eckley, C.S.; Eggert, S.L.; Kolka, R.K.; Sebestyen, S.D.; Swain, E.B.

    2014-01-01

    Forest harvesting leads to changes in soil moisture, temperature and incident solar radiation, all strong environmental drivers of soil–air mercury (Hg) fluxes. Whether different forest harvesting practices significantly alter Hg fluxes from forest soils is unknown. We conducted a field-scale experiment in a northern Minnesota deciduous forest wherein gaseous Hg emissions from the forest floor were monitored after two forest harvesting prescriptions, a traditional clear-cut and a clearcut followed by biomass harvest, and compared to an un-harvested reference plot. Gaseous Hg emissions were measured in quadruplicate at four different times between March and November 2012 using Teflon dynamic flux chambers. We also applied enriched Hg isotope tracers and separately monitored their emission in triplicate at the same times as ambient measurements. Clearcut followed by biomass harvesting increased ambient Hg emissions the most. While significant intra-site spatial variability was observed, Hg emissions from the biomass harvested plot (180 ± 170 ng m −2 d −1 ) were significantly greater than both the traditional clearcut plot (− 40 ± 60 ng m −2 d −1 ) and the un-harvested reference plot (− 180 ± 115 ng m −2 d −1 ) during July. This difference was likely a result of enhanced Hg 2+ photoreduction due to canopy removal and less shading from downed woody debris in the biomass harvested plot. Gaseous Hg emissions from more recently deposited Hg, as presumably representative of isotope tracer measurements, were not significantly influenced by harvesting. Most of the Hg tracer applied to the forest floor became sequestered within the ground vegetation and debris, leaf litter, and soil. We observed a dramatic lessening of tracer Hg emissions to near detection levels within 6 months. As post-clearcutting residues are increasingly used as a fuel or fiber resource, our observations suggest that gaseous Hg emissions from forest soils will increase, although it

  6. Harvesting wildlife affected by climate change: a modelling and management approach for polar bears

    Science.gov (United States)

    Regehr, Eric V.; Wilson, Ryan R.; Rode, Karyn D.; Runge, Michael C.; Stern, Harry

    2017-01-01

    The conservation of many wildlife species requires understanding the demographic effects of climate change, including interactions between climate change and harvest, which can provide cultural, nutritional or economic value to humans.We present a demographic model that is based on the polar bear Ursus maritimus life cycle and includes density-dependent relationships linking vital rates to environmental carrying capacity (K). Using this model, we develop a state-dependent management framework to calculate a harvest level that (i) maintains a population above its maximum net productivity level (MNPL; the population size that produces the greatest net increment in abundance) relative to a changing K, and (ii) has a limited negative effect on population persistence.Our density-dependent relationships suggest that MNPL for polar bears occurs at approximately 0·69 (95% CI = 0·63–0·74) of K. Population growth rate at MNPL was approximately 0·82 (95% CI = 0·79–0·84) of the maximum intrinsic growth rate, suggesting relatively strong compensation for human-caused mortality.Our findings indicate that it is possible to minimize the demographic risks of harvest under climate change, including the risk that harvest will accelerate population declines driven by loss of the polar bear's sea-ice habitat. This requires that (i) the harvest rate – which could be 0 in some situations – accounts for a population's intrinsic growth rate, (ii) the harvest rate accounts for the quality of population data (e.g. lower harvest when uncertainty is large), and (iii) the harvest level is obtained by multiplying the harvest rate by an updated estimate of population size. Environmental variability, the sex and age of removed animals and risk tolerance can also affect the harvest rate.Synthesis and applications. We present a coupled modelling and management approach for wildlife that accounts for climate change and can be used to balance trade-offs among multiple

  7. Harvesting wildlife affected by climate change: a modelling and management approach for polar bears.

    Science.gov (United States)

    Regehr, Eric V; Wilson, Ryan R; Rode, Karyn D; Runge, Michael C; Stern, Harry L

    2017-10-01

    The conservation of many wildlife species requires understanding the demographic effects of climate change, including interactions between climate change and harvest, which can provide cultural, nutritional or economic value to humans.We present a demographic model that is based on the polar bear Ursus maritimus life cycle and includes density-dependent relationships linking vital rates to environmental carrying capacity ( K ). Using this model, we develop a state-dependent management framework to calculate a harvest level that (i) maintains a population above its maximum net productivity level (MNPL; the population size that produces the greatest net increment in abundance) relative to a changing K , and (ii) has a limited negative effect on population persistence.Our density-dependent relationships suggest that MNPL for polar bears occurs at approximately 0·69 (95% CI = 0·63-0·74) of K . Population growth rate at MNPL was approximately 0·82 (95% CI = 0·79-0·84) of the maximum intrinsic growth rate, suggesting relatively strong compensation for human-caused mortality.Our findings indicate that it is possible to minimize the demographic risks of harvest under climate change, including the risk that harvest will accelerate population declines driven by loss of the polar bear's sea-ice habitat. This requires that (i) the harvest rate - which could be 0 in some situations - accounts for a population's intrinsic growth rate, (ii) the harvest rate accounts for the quality of population data (e.g. lower harvest when uncertainty is large), and (iii) the harvest level is obtained by multiplying the harvest rate by an updated estimate of population size. Environmental variability, the sex and age of removed animals and risk tolerance can also affect the harvest rate. Synthesis and applications . We present a coupled modelling and management approach for wildlife that accounts for climate change and can be used to balance trade-offs among multiple conservation

  8. EU mitigation potential of harvested wood products.

    Science.gov (United States)

    Pilli, Roberto; Fiorese, Giulia; Grassi, Giacomo

    2015-12-01

    The new rules for the Land Use, Land Use Change and Forestry sector under the Kyoto Protocol recognized the importance of Harvested Wood Products (HWP) in climate change mitigation. We used the Tier 2 method proposed in the 2013 IPCC KP Supplement to estimate emissions and removals from HWP from 1990 to 2030 in EU-28 countries with three future harvest scenarios (constant historical average, and +/-20% in 2030). For the historical period (2000-2012) our results are consistent with other studies, indicating a HWP sink equal on average to -44.0 Mt CO 2 yr -1 (about 10% of the sink by forest pools). Assuming a constant historical harvest scenario and future distribution of the total harvest among each commodity, the HWP sink decreases to -22.9 Mt CO 2 yr -1 in 2030. The increasing and decreasing harvest scenarios produced a HWP sink of -43.2 and -9.0 Mt CO 2 yr -1 in 2030, respectively. Other factors may play an important role on HWP sink, including: (i) the relative share of different wood products, and (ii) the combined effect of production, import and export on the domestic production of each commodity. Maintaining a constant historical harvest, the HWP sink will slowly tend to saturate, i.e. to approach zero in the long term. The current HWP sink will be maintained only by further increasing the current harvest; however, this will tend to reduce the current sink in forest biomass, at least in the short term. Overall, our results suggest that: (i) there is limited potential for additional HWP sink in the EU; (ii) the HWP mitigation potential should be analyzed in conjunction with other mitigation components (e.g. sink in forest biomass, energy and material substitution by wood).

  9. Krypton retention on solid adsorbents

    International Nuclear Information System (INIS)

    Monson, P.R. Jr.

    1981-08-01

    Over a dozen prospective adsorbents for krypton were studied and evaluated with respect to adsorption capacity and cost for dissolver off-gas streams from nuclear reprocessing plants. Results show that, at subambient temperature (-40 0 to -80 0 C), the commercially available hydrogen mordenite has sufficient adsorptive capacity to be the most cost-effective material studied. Silver mordenite has a higher capacity for krypton retention, but is 50 times more expensive than hydrogen mordenite. The results indicate that a solid adsorbent system is feasible and competitive with other developing systems whih utilize fluorocarbon absorption and cryogenic distillation

  10. Biogeography and organic matter removal shape long-term effects of timber harvesting on forest soil microbial communities.

    Science.gov (United States)

    Wilhelm, Roland C; Cardenas, Erick; Maas, Kendra R; Leung, Hilary; McNeil, Larisa; Berch, Shannon; Chapman, William; Hope, Graeme; Kranabetter, J M; Dubé, Stephane; Busse, Matt; Fleming, Robert; Hazlett, Paul; Webster, Kara L; Morris, David; Scott, D Andrew; Mohn, William W

    2017-11-01

    The growing demand for renewable, carbon-neutral materials and energy is leading to intensified forest land-use. The long-term ecological challenges associated with maintaining soil fertility in managed forests are not yet known, in part due to the complexity of soil microbial communities and the heterogeneity of forest soils. This study determined the long-term effects of timber harvesting, accompanied by varied organic matter (OM) removal, on bacterial and fungal soil populations in 11- to 17-year-old reforested coniferous plantations at 18 sites across North America. Analysis of highly replicated 16 S rRNA gene and ITS region pyrotag libraries and shotgun metagenomes demonstrated consistent changes in microbial communities in harvested plots that included the expansion of desiccation- and heat-tolerant organisms and decline in diversity of ectomycorrhizal fungi. However, the majority of taxa, including the most abundant and cosmopolitan groups, were unaffected by harvesting. Shifts in microbial populations that corresponded to increased temperature and soil dryness were moderated by OM retention, which also selected for sub-populations of fungal decomposers. Biogeographical differences in the distribution of taxa as well as local edaphic and environmental conditions produced substantial variation in the effects of harvesting. This extensive molecular-based investigation of forest soil advances our understanding of forest disturbance and lays the foundation for monitoring long-term impacts of timber harvesting.

  11. Low power interface IC's for electrostatic energy harvesting applications

    Science.gov (United States)

    Kempitiya, Asantha

    The application of wireless distributed micro-sensor systems ranges from equipment diagnostic and control to real time structural and biomedical monitoring. A major obstacle in developing autonomous micro-sensor networks is the need for local electric power supply, since using a battery is often not a viable solution. This void has sparked significant interest in micro-scale power generators based on electrostatic, piezoelectric and electromagnetic energy conversion that can scavenge ambient energy from the environment. In comparison to existing energy harvesting techniques, electrostatic-based power generation is attractive as it can be integrated using mainstream silicon technologies while providing higher power densities through miniaturization. However the power output of reported electrostatic micro-generators to date does not meet the communication and computation requirements of wireless sensor nodes. The objective of this thesis is to investigate novel CMOS-based energy harvesting circuit (EHC) architectures to increase the level of harvested mechanical energy in electrostatic converters. The electronic circuits that facilitate mechanical to electrical energy conversion employing variable capacitors can either have synchronous or asynchronous architectures. The later does not require synchronization of electrical events with mechanical motion, which eliminates difficulties in gate clocking and the power consumption associated with complex control circuitry. However, the implementation of the EHC with the converter can be detrimental to system performance when done without concurrent optimization of both elements, an aspect mainly overlooked in the literature. System level analysis is performed to show that there is an optimum value for either the storage capacitor or cycle number for maximum scavenging of ambient energy. The analysis also shows that maximum power is extracted when the system approaches synchronous operation. However, there is a region of

  12. Coping with Rainfall Variability in Northern Tanzania

    DEFF Research Database (Denmark)

    Trærup, Sara Lærke Meltofte

    2012-01-01

    This paper explores a potential relationship between rainfall data and household self-reported harvest shocks and local (spatial) variability of harvest shocks and coping strategies based on a survey of 2700 rural households in the Kagera region of northern Tanzania. In addition, correlations...... of household reported harvest shocks differs significantly between districts and correspond to the observed variability in local climate patterns. Coping strategies are focused on spreading risks and include reduced consumption, casual employment, new crops, external support and the selling of assets....... There are no large differences in applied coping strategies across the region, but district-level data demonstrate how local strategies differ between localities within the districts. The results emphasize that in order to target rural policies and make them efficient, it is important to take into account the local...

  13. Design optimization of harvester head and actuation system of forest harvester

    DEFF Research Database (Denmark)

    Andersen, Torben Ole; Hansen, Michael R.; Mouritsen, Ole Ø.

    2005-01-01

    This paper is on the analysis and subsequent efficiency optimization of a forrest harvester. As basis for the optimization the existing machine has undergone substantial experimental testing with a view to determine the loading that the harvester head is subjected to and also the corresponding...

  14. Broadband piezoelectric energy harvesting using nonlinear magnetic forces; Bandbreitensteigerung von piezoelektrischen Energy Harvesting Systemen durch Magnetkraefte

    Energy Technology Data Exchange (ETDEWEB)

    Westermann, Henrik; Neubauer, Marcus; Wallaschek, Joerg [Hannover Univ. (Germany). Inst. fuer Dynamik und Schwingungen

    2012-07-15

    Using ambient energy by piezoelectric energy harvesting systems received much attention over the last years. Most vibration-based generators produce a sufficient power only if the transducer is excited in its resonance frequency. The use of magnetic forces suggests a promising strategy to increase the efficiency. This paper presents different ways for broadband piezoelectric energy harvesting using nonlinear magnetic forces. (orig.)

  15. Tropical forest harvesting and taxation: a dynamic model of harvesting behavior under selective extraction systems

    Science.gov (United States)

    Robert F. Conrad; Malcolm Gillis; D. Evan Mercer

    2005-01-01

    A dynamic model of selective harvesting in multi-species,multi-age tropical forests is developed. Forests are predicted to exhibit different optimal harvesting profiles depending on the nature of their joint cost functions and own or cross-species stock effects. The model is applied to the controversy about incentives produced by various taxes. The impacts of specific...

  16. 75 FR 3888 - Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska...

    Science.gov (United States)

    2010-01-25

    ...-0082; 91200-1231-9BPP-L2] RIN 1018-AW67 Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska During the 2010 Season AGENCY: Fish and Wildlife Service, Interior... Service, are reopening the public comment period on our proposed rule to establish migratory bird...

  17. Harvesting of short rotation coppice. Harvesting trials with a cut and storage system in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Schweier, J.; Becker, G.

    2012-11-01

    Short rotation coppice (SRC) harvesting techniques are available in Germany, but broad experience and knowledge about machine performance and the related effective costs of harvesting operations are still missing. This information is crucial, as harvesting costs strongly influence the economic performance of the overall supply chain. Therefore, it was the aim of this study to collect and analyze productivity data of different harvesting systems for SRC. The combined cut and chip system on the one hand and the cut and storage system on the other hand were studied by literature review. Several studies analyze the combined cut and chip systems and the reported machine productivities showed great variations. The average was 30 green tons per scheduled machine hour (gt smh{sup -1}). Few studies are analysing the cut and storage system. They report that machines still are under development and that further research is needed. Therefore, time studies of harvesting operations using the cut and storage system were carried out. Five trials were performed with the harvesting machine 'Stemster MK III' developed by Nordic Biomass. The share of productive working time was 85% and the average productivity was 21 gt smh{sup -1}. These results were compared with values from the literature. Resulting harvesting costs were calculated per oven dry ton (Euro odt{sup -1}). The advantages and disadvantages of both harvesting systems are highlighted. (orig.)

  18. Supporting nurse practitioner education: Preceptorship recruitment and retention

    Directory of Open Access Journals (Sweden)

    Eric Staples

    2018-04-01

    Full Text Available Objectives: Clinical experience is an essential component of nurse practitioner (NP education that relies heavily on preceptors. Recruitment and retention of preceptors is challenging due to many variables that can affect NP education and practice. We surveyed Canadian NP programs to understand their preceptorship structures, how they support preceptorship, and to identify gaps and challenges to recruitment and retention of preceptors. Methods: An 18-item survey, developed by the NP Education Interest Group, was distributed to 24 universities across 10 Canadian provinces. Construct validity and reliability was assessed by experienced NPs and NP faculty. Data were analyzed using relative frequency statistics and thematic analysis. Participants consisted of administrative staff and/or faculty designated as responsible for recruitment and retention of NP preceptors. Results: Seventeen returned surveys were analyzed and demonstrated more similarities than differences across Canada's NP programs, particularly related to barriers affecting recruitment and retention of preceptors. The findings identified NP programs have too many students for the number of available clinical sites/preceptors, resulting in overutilization, burnout, or refusal to take students. Competition with other health disciplines for clinical placements was identified as a challenge to placements. Respondents commented they lack time to recruit, provide follow-up, offer support, or seek preceptors' feedback due to competing work demands. They identified the need for standardized funding for preceptor remuneration and recognition across the country. Conclusion: The findings suggest the need for exploring a wider intraprofessional collaboration among graduate NP programs/faculty, clinical placement sites, and NPs to facilitate the recruitment and retention of preceptors.

  19. Variance in exposed perturbations impairs retention of visuomotor adaptation.

    Science.gov (United States)

    Canaveral, Cesar Augusto; Danion, Frédéric; Berrigan, Félix; Bernier, Pierre-Michel

    2017-11-01

    Sensorimotor control requires an accurate estimate of the state of the body. The brain optimizes state estimation by combining sensory signals with predictions of the sensory consequences of motor commands using a forward model. Given that both sensory signals and predictions are uncertain (i.e., noisy), the brain optimally weights the relative reliance on each source of information during adaptation. In support, it is known that uncertainty in the sensory predictions influences the rate and generalization of visuomotor adaptation. We investigated whether uncertainty in the sensory predictions affects the retention of a new visuomotor relationship. This was done by exposing three separate groups to a visuomotor rotation whose mean was common at 15° counterclockwise but whose variance around the mean differed (i.e., SD of 0°, 3.2°, or 4.5°). Retention was assessed by measuring the persistence of the adapted behavior in a no-vision phase. Results revealed that mean reach direction late in adaptation was similar across groups, suggesting it depended mainly on the mean of exposed rotations and was robust to differences in variance. However, retention differed across groups, with higher levels of variance being associated with a more rapid reversion toward nonadapted behavior. A control experiment ruled out the possibility that differences in retention were accounted for by differences in success rates. Exposure to variable rotations may have increased the uncertainty in sensory predictions, making the adapted forward model more labile and susceptible to change or decay. NEW & NOTEWORTHY The brain predicts the sensory consequences of motor commands through a forward model. These predictions are subject to uncertainty. We use visuomotor adaptation and modulate uncertainty in the sensory predictions by manipulating the variance in exposed rotations. Results reveal that variance does not influence the final extent of adaptation but selectively impairs the retention of

  20. Practicing more retrieval routes leads to greater memory retention.

    Science.gov (United States)

    Zheng, Jun; Zhang, Wei; Li, Tongtong; Liu, Zhaomin; Luo, Liang

    2016-09-01

    A wealth of research has shown that retrieval practice plays a significant role in improving memory retention. The current study focused on one simple yet rarely examined question: would repeated retrieval using two different retrieval routes or using the same retrieval route twice lead to greater long-term memory retention? Participants elaborately learned 22 Japanese-Chinese translation word pairs using two different mediators. Half an hour after the initial study phase, the participants completed two retrieval sessions using either one mediator (Tm1Tm1) or two different mediators (Tm1Tm2). On the final test, which was performed 1week after the retrieval practice phase, the participants received only the cue with a request to report the mediator (M1 or M2) followed by the target (Experiment 1) or only the mediator (M1 or M2) with a request to report the target (Experiment 2). The results of Experiment 1 indicated that the participants who practiced under the Tm1Tm2 condition exhibited greater target retention than those who practiced under the Tm1Tm1 condition. This difference in performance was due to the significant disadvantage in mediator retrieval and decoding of the unpracticed mediator under the Tm1Tm1 condition. Although mediators were provided to participants on the final test in Experiment 2, decoding of the unpracticed mediators remained less effective than decoding of the practiced mediators. We conclude that practicing multiple retrieval routes leads to greater memory retention than focusing on a single retrieval route. Thus, increasing retrieval variability during repeated retrieval practice indeed significantly improves long-term retention in a delay test. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. March-June temperature reconstruction in the Czech Lands based on cereal harvest dates in the 1501-2008 period

    Science.gov (United States)

    Brázdil, Rudolf; Možný, Martin; Dobrovolný, Petr; Trnka, Mirek

    2010-05-01

    Cereal crop harvests reflect the weather patterns of the period immediately preceding them, and thus the dates at which they begin may be used as a source of proxy data on regional climate. Using systematic phenological observations in the Czech Lands (now known as the Czech Republic) after 1848, together with exploration of further surviving documentary evidence (chronicles, diaries, financial accounts etc.), it has proved possible to create series of winter wheat harvest dates for the period 1501-2008. Employing linear regression, the harvesting dates of the main cereal species (wheat, rye, barley, oats) were first converted to winter wheat harvest days and then normalised to the same altitude above sea level. The next step consisted of using series of winter wheat harvest dates to reconstruct mean March-June temperatures in the Czech Lands, applying standard palaeoclimatological methods. Series reconstructed by linear regression explain 70% of temperature variability. A profound cold period corresponding with late winter wheat harvests was noted between 1659 and 1705. In contrast, warm periods (i.e. early winter wheat harvests) were found for the periods of 1517-1542, 1788-1834 and 1946-2008. The period after 1951 is the warmest of all throughout the entire 1501-2008 period. Comparisons with other European temperature reconstructions derived from documentary sources (including grape harvest dates), tree-ring and instrumental data reveal generally close agreement, with significant correlations. Lower correlations around A.D. 1650 and 1750 may be partly related to deterioration of socio-economic conditions in the Czech Lands resulting from prolonged wars. The results obtained demonstrate that it is possible to use widely-available cereal harvest data for climate analysis and also that such data constitute an independent proxy data series for the region of Central Europe crucial to further studies of the potential impact of climatic variability and climate change

  2. Harvesting budworm-damaged stands for fuel

    Energy Technology Data Exchange (ETDEWEB)

    Henley, S.G. (York, Sunbury, Charlotte Wood Products Marketing Board, (Canada))

    1985-01-01

    This project was initiated to demonstrate the economics and logistics of harvesting budworm-damaged stands for use as fuel. Dead spruce and balsam fir were to be harvested from small private woodlots in southwestern New Brunswick, using an integrated, full-tree harvesting system to produce wood chip fuel and other forest products. The overall objectives of the study are listed. The harvesting equipment and the selection of sites are discussed. The most efficient methods of finding candidate woodlots was found to be by advertising and word of mouth. Contact was made with 85 woodlot owners, and 45 woodlots were visited and evaluated for their suitability. A further 150 management plans were screened and rejected for various reasons. Only 2 woodlots were initially recognized as potential sites; however, after showing some interest, the owners decided not to participate. The reasons for the rejection of the various woodlots are listed. The fact that a number of owners were against clearcutting, and, in some cases, against any cutting, and that others showed no interest in the study, is attributed to the high percentage of white-collar workers owning woodlots. Other strategies for harvesting dead or scrap wood are suggested. 1 ref., 1 tab.

  3. Assessment of rainwater harvesting potential using GIS

    Science.gov (United States)

    Hari, Durgasrilakshmi; Ramamohan Reddy, K.; Vikas, Kola; Srinivas, N.; Vikas, G.

    2018-03-01

    Rainwater harvesting (RWH) is one of the best practices to overcome the scarcity of water. Rainwater harvesting involves collection and storage of rainwater locally through different technologies, for future use. It is also useful for livestock, groundwater recharge and for irrigation practices. Potential of rainwater harvesting refers to the capacity of an individual catchment that harnesses the water falling on the catchment during a particular year considering all rainy days. The present study deals with the identification of the study area boundary and marking it as a Polygon in Google Earth Pro Later, Rooftops of various house entities and roads were digitized using the Polygon command in Google Earth Pro. GIS technique is employed for locating boundaries of the study area and for calculating the areas of various types of rooftops and roads. With the application of GIS, it is possible to assess the total potential of water that can be harvested. The present study will enable us to identify the suitable type of water harvesting structure along with the number of structures required. It is extremely an ideal and effective solution to overcome the water crisis through water conservation in the study area.

  4. Energy harvesting from hydraulic pressure fluctuations

    International Nuclear Information System (INIS)

    Cunefare, K A; Skow, E A; Erturk, A; Savor, J; Verma, N; Cacan, M R

    2013-01-01

    State-of-the-art hydraulic hose and piping systems employ integral sensor nodes for structural health monitoring to avoid catastrophic failures. Energy harvesting in hydraulic systems could enable self-powered wireless sensor nodes for applications such as energy-autonomous structural health monitoring and prognosis. Hydraulic systems inherently have a high energy intensity associated with the mean pressure and flow. Accompanying the mean pressure is the dynamic pressure ripple, which is caused by the action of pumps and actuators. Pressure ripple is a deterministic source with a periodic time-domain behavior conducive to energy harvesting. An energy harvester prototype was designed for generating low-power electricity from pressure ripples. The prototype employed an axially-poled off-the-shelf piezoelectric stack. A housing isolated the stack from the hydraulic fluid while maintaining a mechanical coupling allowing for dynamic-pressure-induced deflection of the stack. The prototype exhibited an off-resonance energy harvesting problem since the fundamental resonance of the piezoelectric stack was much higher than the frequency content of the pressure ripple. The prototype was designed to provide a suitable power output for powering sensors with a maximum output of 1.2 mW. This work also presents electromechanical model simulations and experimental characterization of the piezoelectric power output from the pressure ripple in terms of the force transmitted into the harvester. (paper)

  5. A novel bistable energy harvesting concept

    International Nuclear Information System (INIS)

    Scarselli, G; Nicassio, F; Pinto, F; Ciampa, F; Iervolino, O; Meo, M

    2016-01-01

    Bistable energy harvesting has become a major field of research due to some unique features for converting mechanical energy into electrical power. When properly loaded, bistable structures snap-through from one stable configuration to another, causing large strains and consequently power generation. Moreover, bistable structures can harvest energy across a broad-frequency bandwidth due to their nonlinear characteristics. Despite the fact that snap-through may be triggered regardless of the form or frequency of exciting vibration, the external force must reach a specific snap-through activation threshold value to trigger the transition from one stable state to another. This aspect is a limiting factor for realistic vibration energy harvesting application with bistable devices. This paper presents a novel power harvesting concept for bistable composites based on a ‘lever effect’ aimed at minimising the activation force to cause the snap through by choosing properly the bistable structures’ constraints. The concept was demonstrated with the help of numerical simulation and experimental testing. The results showed that the actuation force is one order of magnitude smaller (3%–6%) than the activation force of conventionally constrained bistable devices. In addition, it was shown that the output voltage was higher than the conventional configuration, leading to a significant increase in power generation. This novel concept could lead to a new generation of more efficient bistable energy harvesters for realistic vibration environments. (paper)

  6. Nanoscale piezoelectric vibration energy harvester design

    Science.gov (United States)

    Foruzande, Hamid Reza; Hajnayeb, Ali; Yaghootian, Amin

    2017-09-01

    Development of new nanoscale devices has increased the demand for new types of small-scale energy resources such as ambient vibrations energy harvesters. Among the vibration energy harvesters, piezoelectric energy harvesters (PEHs) can be easily miniaturized and fabricated in micro and nano scales. This change in the dimensions of a PEH leads to a change in its governing equations of motion, and consequently, the predicted harvested energy comparing to a macroscale PEH. In this research, effects of small scale dimensions on the nonlinear vibration and harvested voltage of a nanoscale PEH is studied. The PEH is modeled as a cantilever piezoelectric bimorph nanobeam with a tip mass, using the Euler-Bernoulli beam theory in conjunction with Hamilton's principle. A harmonic base excitation is applied as a model of the ambient vibrations. The nonlocal elasticity theory is used to consider the size effects in the developed model. The derived equations of motion are discretized using the assumed-modes method and solved using the method of multiple scales. Sensitivity analysis for the effect of different parameters of the system in addition to size effects is conducted. The results show the significance of nonlocal elasticity theory in the prediction of system dynamic nonlinear behavior. It is also observed that neglecting the size effects results in lower estimates of the PEH vibration amplitudes. The results pave the way for designing new nanoscale sensors in addition to PEHs.

  7. A Galloping Energy Harvester with Attached Flow

    Science.gov (United States)

    Denissenko, Petr; Khovanov, Igor; Tucker-Harvey, Sam

    2017-11-01

    Aeroelastic energy harvesters are a promising technology for the operation of wireless sensors and microelectromechanical systems, as well as providing the possibility of harvesting wind energy in applications were conventional wind turbines are ineffective, such as in highly turbulent flows, or unreliable, such as in harsh environmental conditions. The development of aeroelastic energy harvesters to date has focused on the flutter of airfoils, the galloping of prismatic structures, and the vortex induced vibrations. We present a novel type of galloping energy harvester with the flow becoming attached when the oscillation amplitude is high enough. With the flow attached, the harvester blade acts closer to an aerofoil than a bluff body, which results in a higher efficiency. The dynamics of a prototype device has been characterised experimentally with the use of a motion tracking system. The flow structure in the vicinity of the device has been studied using smoke visualisation and PIV measurements. A lumped parameter mathematical model has been developed and related to the experimental results.

  8. NUTRIENT BALANCE IN WATER HARVESTING SOILS

    Directory of Open Access Journals (Sweden)

    Díaz, F

    2005-05-01

    Full Text Available Dryland farming on Fuerteventura and Lanzarote (Canary Islands, Spain, which has an annual rainfall of less than 150 mm/year, has been based traditionally on water harvesting techniques (known locally as “gavias”. Periods of high productivity alternate with those of very low yield. The systems are sustainable in that they reduce erosive processes, contribute to soil and soil-water conservation and are largely responsible for maintaining the soil’s farming potential. In this paper we present the chemical fertility status and nutrient balance of soils in five “gavia” systems. The results are compared with those obtained in adjacent soils where this water harvesting technique is not used. The main crops are wheat, barley, maize, lentils and chick-peas. Since neither organic nor inorganic fertilisers are used, nutrients are derived mainly from sediments carried by runoff water. Nutrients are lost mainly through crop harvesting and harvest residues. The soils where water harvesting is used have lower salt and sodium in the exchange complex, are higher in carbon, nitrogen, copper and zinc and have similar phosphorous and potassium content. It is concluded that the systems improve the soil’s natural fertility and also that natural renovation of nutrients occurs thanks to the surface deposits of sediments, which mix with the arable layer. The system helps ensure adequate fertility levels, habitual in arid regions, thus allowing dryland farming to be carried out.

  9. Refreshing Music: Fog Harvesting with Harps

    Science.gov (United States)

    Shi, Weiwei; Anderson, Mark; Kennedy, Brook; Boreyko, Jonathan

    2017-11-01

    Fog harvesting is a useful technique for obtaining fresh water in arid climates. The wire meshes currently utilized for fog harvesting suffer from dual constraints: coarse meshes cannot efficiently capture fog, while fine meshes suffer from clogging issues. Here, we design a new type of fog harvester comprised of an array of vertical wires, which we call ``fog harps.'' To investigate the water collection efficiency, three fog harps were designed with different diameters (254 μm, 508 μm and 1.30 mm) but the same pitch-to-diameter ratio of 2. For comparison, three different size meshes were purchased with equivalent dimensions. As expected for the mesh structures, the mid-sized wires performed the best, with a drop-off in performance for the fine or coarse meshes. In contrast, the fog harvesting rate continually increased with decreasing wire diameter for the fog harps, due to its low hysteresis that prevented droplet clogging. This resulted in a 3-fold enhancement in the fog harvesting rate for the harp form factor compared to the mesh. The lack of a performance ceiling for the harps suggest that even greater enhancements could be achieved by scaling down to yet smaller sizes.

  10. Radionuclide Retention in Concrete Wasteforms

    Energy Technology Data Exchange (ETDEWEB)

    Wellman, Dawn M.; Jansik, Danielle P.; Golovich, Elizabeth C.; Cordova, Elsa A.

    2012-09-24

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how wasteform performance is affected by the full range of environmental conditions within the disposal facility; the process of wasteform aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of wasteform aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the wasteforms come in contact with groundwater. Data collected throughout the course of this work will be used to quantify the efficacy of concrete wasteforms, similar to those used in the disposal of LLW and MLLW, for the immobilization of key radionuclides (i.e., uranium, technetium, and iodine). Data collected will also be used to quantify the physical and chemical properties of the concrete affecting radionuclide retention.

  11. Engagement and Retention in Outpatient Alcoholism Treatment for Women

    Science.gov (United States)

    Graff, Fiona S.; Morgan, Thomas J.; Epstein, Elizabeth E.; McCrady, Barbara S.; Cook, Sharon M.; Jensen, Noelle K.; Kelly, Shalonda

    2011-01-01

    Reviews of the dropout literature note significant attrition from addiction treatment. However, consistent predictors have not been identified and few studies have examined factors related to retention and engagement for women in gender-specific treatment. The current study consisted of 102 women and their partners randomized to individual or couples outpatient alcoholism treatment. Women attended more treatment sessions if they were assigned to individual treatment, older, had fewer symptoms of alcohol dependence, had more satisfying marital relationships, had spouses who drank, and had matched preference for treatment condition. Women were more engaged in treatment (i.e., completed more assigned homework) if they had fewer children at home, fewer alcohol dependence symptoms, later age of onset of alcohol diagnosis, more satisfying marital relationships, and spouses who accepted or encouraged their drinking. Results highlight important associations of treatment and relationship variables with treatment retention and engagement. PMID:19444731

  12. Factors affecting retention in science-based curriculums at HBCUs

    Energy Technology Data Exchange (ETDEWEB)

    Pelham, J.

    1991-01-01

    A systematic and comprehensive study of the retention of minority students enrolled in college-level engineering was conducted. The majority of prior work in this area focused on institutional retention factors for students in non-specified majors and considered students dropouts'' whenever there was a break in enrollment. This study looked only at students whose beginning major was engineering, enrolled primarily at historically black colleges and universities (HBCUs), including a comparison sample from a predominantly white institution (PWI). Science persisters were defined as those students who continuously enrolled in post-secondary institutions full- and part-time -- whether or not they transferred between institutions. The critical factor was their continued enrollment in engineering. Study participants provided four types of information: (1) a measure of academic motivation, (2) an objective measure of science interest, (3) a measure of nine aspects of normal personality functioning, and (4) an assessment of selected demographic variables. 64 refs.

  13. Factors affecting retention in science-based curriculums at HBCUs

    Energy Technology Data Exchange (ETDEWEB)

    Pelham, J.

    1991-12-31

    A systematic and comprehensive study of the retention of minority students enrolled in college-level engineering was conducted. The majority of prior work in this area focused on institutional retention factors for students in non-specified majors and considered students ``dropouts`` whenever there was a break in enrollment. This study looked only at students whose beginning major was engineering, enrolled primarily at historically black colleges and universities (HBCUs), including a comparison sample from a predominantly white institution (PWI). Science persisters were defined as those students who continuously enrolled in post-secondary institutions full- and part-time -- whether or not they transferred between institutions. The critical factor was their continued enrollment in engineering. Study participants provided four types of information: (1) a measure of academic motivation, (2) an objective measure of science interest, (3) a measure of nine aspects of normal personality functioning, and (4) an assessment of selected demographic variables. 64 refs.

  14. Improving the Multi-Objective Performance of Rainwater Harvesting Systems Using Real-Time Control Technology

    Directory of Open Access Journals (Sweden)

    Wei D. Xu

    2018-02-01

    Full Text Available Many studies have identified the potential of rainwater harvesting (RWH systems to simultaneously augment potable water supply and reduce delivery of uncontrolled stormwater flows to downstream drainage networks. Potentially, such systems could also play a role in the controlled delivery of water to urban streams in ways which mimic baseflows. The performance of RWH systems to achieve these three objectives could be enhanced using Real-Time Control (RTC technology to receive rainfall forecasts and initiate pre-storm release in real time, although few studies have explored such potential. We used continuous simulation to model the ability of a range of allotment-scale RWH systems to simultaneously deliver: (i water supply; (ii stormwater retention; and (iii baseflow restoration. We compared the performance of RWH systems with RTC technology to conventional RWH systems and also systems designed with a passive baseflow release, rather than the active (RTC configuration. We found that RWH systems employing RTC technology were generally superior in simultaneously achieving water supply, stormwater retention and baseflow restoration benefits compared with the other types of system tested. The active operation provided by RTC allows the system to perform optimally across a wider range of climatic conditions, but needs to be carefully designed. We conclude that the active release mechanism employing RTC technology exhibits great promise; its ability to provide centralised control and failure detection also opens the possibility of delivering a more reliable rainwater harvesting system, which can be readily adapted to varying climate over both the short and long term.

  15. Fission-product retention in HTGR fuels

    International Nuclear Information System (INIS)

    Homan, F.J.; Kania, M.J.; Tiegs, T.N.

    1982-01-01

    Retention data for gaseous and metallic fission products are presented for both Triso-coated and Biso-coated HTGR fuel particles. Performance trends are established that relate fission product retention to operating parameters, such as temperature, burnup, and neutron exposure. It is concluded that Biso-coated particles are not adequately retentive of fission gas or metallic cesium, and Triso-coated particles which retain cesium still lose silver. Design implications related to these performance trends are identified and discussed

  16. A Study on Employee Retention Techniques

    OpenAIRE

    Savarimuthu, Dr. A; Hemalatha, N.

    2013-01-01

    The objective of perusing this study is to assess the level of satisfaction of employee retention techniques at GB Engineering Enterprises PVT Limited., Trichy.This study gains significance because of employee retention techniques can be approached from various angles. It is desirable state of existence involving retention strategies generally fall in to one of four categories salary, working conditions, job enrichment and education. These four elements together constitute. The structure of e...

  17. MECHANIZED HARVESTING TESTS PERFORMED BY GRAPE HARVESTERS IN SUPER INTENSIVE OLIVE ORCHARD CULTIVATION IN SPAIN

    Directory of Open Access Journals (Sweden)

    Gennaro Giametta

    2009-06-01

    Full Text Available Today also those countries boasting a century-old olive growing tradition have to look at the latest, most dynamic, non labour-intensive olive growing systems to abate production (notably, harvesting operations costs and remain competitive in a globalized market. This is why over the last few years super intensive olive orchard cultivation has been attracting a lot of interest on the part of olive growers all over the world as it accounts for an innovative model whereby olive groves are tailored to the special needs of grape harvesters. This paper reports the first results of experimental mechanical harvesting tests in a super-intensive olive cultivation. The study is intended to explore both productivity and work capacity of two of the most commonly used grape harvesters, Grégoire G120SW and New Holland Braud VX680, in a view to assessing their harvesting performance by a series of tests conducted in Spain. On the basis of the tests it was possible to verify that the machines are able to detach the almost all the drupes (more than 90%, with one only passage, and this independently of both size and location of drupes on the tree crown and of their maturity stage. Using these machines, two people can often carry out the whole harvest process: an operator driving the harvester and another person transferring the fruit from the harvester in the field to the olive oil mill for processing. With this system, the work speed is usually, in the best working conditions, about 1.7 km/hour and the average harvesting time is about 2.5-3 hours/ha. For the time being it is however impossible to draw definitive conclusions in terms of performance of the above cultivation systems and harvesting machines. Additional key observational studies are needed in the years to come to assess the efficiency of the entire model.

  18. Evaluation of mechanical harvesting in viticulture

    Directory of Open Access Journals (Sweden)

    Pavel Zemánek

    2005-01-01

    Full Text Available Harvesting by mashine was in CZ tested at bygones century (70th. Tests rekord were bad (high share of leaf, detritus of concrete column, losses of berries.Lasting fall of worker in agriculture and vehement growth floricultural surfaces – vineyard (somewhere 19.000 hectare, requires complex rationalization and mechanization of all works stages which needs needlework. Harvisting in viniculture needs perhaps 30% of all working time (200–250 o‘clock on 1 hectare. Incidence thereof begun most of bigger producers in our country with mechanical harvisting. Technical performance of this machines turn up. There are not available data about costs and their work quality.The benefit deal with classification of mechanical harvesting (juice adhering, berries lost, damage of vineyard transaction by the help of semi-trailer and self-propelled harvesters.

  19. Architectures for wrist-worn energy harvesting

    Science.gov (United States)

    Rantz, R.; Halim, M. A.; Xue, T.; Zhang, Q.; Gu, L.; Yang, K.; Roundy, S.

    2018-04-01

    This paper reports the simulation-based analysis of six dynamical structures with respect to their wrist-worn vibration energy harvesting capability. This work approaches the problem of maximizing energy harvesting potential at the wrist by considering multiple mechanical substructures; rotational and linear motion-based architectures are examined. Mathematical models are developed and experimentally corroborated. An optimization routine is applied to the proposed architectures to maximize average power output and allow for comparison. The addition of a linear spring element to the structures has the potential to improve power output; for example, in the case of rotational structures, a 211% improvement in power output was estimated under real walking excitation. The analysis concludes that a sprung rotational harvester architecture outperforms a sprung linear architecture by 66% when real walking data is used as input to the simulations.

  20. Subwavelength resonant antennas enhancing electromagnetic energy harvesting

    Science.gov (United States)

    Oumbe Tekam, Gabin; Ginis, Vincent; Seetharamdoo, Divitha; Danckaert, Jan

    2016-04-01

    In this work, an electromagnetic energy harvester operating at microwave frequencies is designed based on a cut- wire metasurface. This metamaterial is known to contain a quasistatic electric dipole resonator leading to a strong resonant electric response when illuminated by electromagnetic fields.1 Starting from an equivalent electrical circuit, we analytically design the parameters of the system to tune the resonance frequency of the harvester at the desired frequency band. Subsequently, we compare these results with numerical simulations, which have been obtained using finite elements numerical simulations. Finally, we optimize the design by investigating the best arrangement for energy harvesting by coupling in parallel and in series many single layers of cut-wire metasurfaces. We also discuss the implementation of different geometries and sizes of the cut-wire metasurface for achieving different center frequencies and bandwidths.

  1. Forest harvesting systems friendly to the environment

    Energy Technology Data Exchange (ETDEWEB)

    Waesterlund, I [Swedish Univ. of Agricultural Sciences, Garpenberg (Sweden); Hassan, A E [North Carolina State Univ. Col. of Forest Resources, Raleigh, NC (United States)

    1995-09-01

    The trend in forestry practices today in Europe and U.S.A. in general and Scandinavian countries in particular, is towards adapting systems based on landscape planning. Thus common harvesting equipment available on the market will have to be replaced to meet these tough demands. Environmentalists recommend that wood fiber should be harvested either by selection cutting or commercial thinning thus leaving the site undisturbed with no sign of machine traffic. This mandate will preserve ground water quality and assist in soil conservation. However, to meet the pulp and paper as well as saw mill industries demand for wood from this method of cutting (selection or commercial thinning), requires a thorough examination of our harvesting systems and techniques. This paper will discuss present and future machines that are friendly to the environment. Hypothetical designs and improvements of existing machine systems will be addressed and recommendations will be made for future research activities. 75 refs, 8 figs, 1 tab

  2. Forest harvesting systems friendly to the environment

    International Nuclear Information System (INIS)

    Waesterlund, I.; Hassan, A.E.

    1995-01-01

    The trend in forestry practices today in Europe and U.S.A. in general and Scandinavian countries in particular, is towards adapting systems based on landscape planning. Thus common harvesting equipment available on the market will have to be replaced to meet these tough demands. Environmentalists recommend that wood fiber should be harvested either by selection cutting or commercial thinning thus leaving the site undisturbed with no sign of machine traffic. This mandate will preserve ground water quality and assist in soil conservation. However, to meet the pulp and paper as well as saw mill industries demand for wood from this method of cutting (selection or commercial thinning), requires a thorough examination of our harvesting systems and techniques. This paper will discuss present and future machines that are friendly to the environment. Hypothetical designs and improvements of existing machine systems will be addressed and recommendations will be made for future research activities. 75 refs, 8 figs, 1 tab

  3. Variability Bugs:

    DEFF Research Database (Denmark)

    Melo, Jean

    . Although many researchers suggest that preprocessor-based variability amplifies maintenance problems, there is little to no hard evidence on how actually variability affects programs and programmers. Specifically, how does variability affect programmers during maintenance tasks (bug finding in particular......)? How much harder is it to debug a program as variability increases? How do developers debug programs with variability? In what ways does variability affect bugs? In this Ph.D. thesis, I set off to address such issues through different perspectives using empirical research (based on controlled...... experiments) in order to understand quantitatively and qualitatively the impact of variability on programmers at bug finding and on buggy programs. From the program (and bug) perspective, the results show that variability is ubiquitous. There appears to be no specific nature of variability bugs that could...

  4. Stand mid-diameter extraction mid-distances influence in the harvesting costs of Eucalyptus globulus forest system in the Chile central zone

    International Nuclear Information System (INIS)

    Barrios, Alonso; Lopez, Ana M; Nieto, Victor M

    2008-01-01

    A whole tree and in-wood chipping harvesting system was studied by modelling and dynamic simulation. The iThink environment was used to build an application for simulating the operation of the harvesting system, using both deterministic and stochastic models (Isee systems, Inc. 2007). The variables used in this study were the mean diameter at breast height and the mean skidding distance of the stand. In this way, the influence of these variables in the systems cost per cubic meter was determined. This study exhibits a technical approach for establishing more appropriate payment fees, considering that the harvesting costs vary according to the stand characteristics.

  5. Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

    Science.gov (United States)

    Lee, Dasheng

    2008-01-01

    In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV) measurement. The energy harvesting wireless sensor network (WSN) was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR) is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an energy efficient

  6. Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network

    Directory of Open Access Journals (Sweden)

    Dasheng Lee

    2008-12-01

    Full Text Available In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV measurement. The energy harvesting wireless sensor network (WSN was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an

  7. Energy Harvesting Chip and the Chip Based Power Supply Development for a Wireless Sensor Network.

    Science.gov (United States)

    Lee, Dasheng

    2008-12-02

    In this study, an energy harvesting chip was developed to scavenge energy from artificial light to charge a wireless sensor node. The chip core is a miniature transformer with a nano-ferrofluid magnetic core. The chip embedded transformer can convert harvested energy from its solar cell to variable voltage output for driving multiple loads. This chip system yields a simple, small, and more importantly, a battery-less power supply solution. The sensor node is equipped with multiple sensors that can be enabled by the energy harvesting power supply to collect information about the human body comfort degree. Compared with lab instruments, the nodes with temperature, humidity and photosensors driven by harvested energy had variation coefficient measurement precision of less than 6% deviation under low environmental light of 240 lux. The thermal comfort was affected by the air speed. A flow sensor equipped on the sensor node was used to detect airflow speed. Due to its high power consumption, this sensor node provided 15% less accuracy than the instruments, but it still can meet the requirement of analysis for predicted mean votes (PMV) measurement. The energy harvesting wireless sensor network (WSN) was deployed in a 24-hour convenience store to detect thermal comfort degree from the air conditioning control. During one year operation, the sensor network powered by the energy harvesting chip retained normal functions to collect the PMV index of the store. According to the one month statistics of communication status, the packet loss rate (PLR) is 2.3%, which is as good as the presented results of those WSNs powered by battery. Referring to the electric power records, almost 54% energy can be saved by the feedback control of an energy harvesting sensor network. These results illustrate that, scavenging energy not only creates a reliable power source for electronic devices, such as wireless sensor nodes, but can also be an energy source by building an energy efficient

  8. Accumulation and connectivity of coarse woody debris in partial harvest and unmanaged relict forests.

    Directory of Open Access Journals (Sweden)

    Robert C Morrissey

    Full Text Available When a tree dies, it continues to play an important ecological role within forests. Coarse woody debris (CWD, including standing deadwood (SDW and downed deadwood (DDW, is an important functional component of forest ecosystems, particularly for many dispersal-limited saproxylic taxa and for metapopulation dynamics across landscapes. Processes, such as natural disturbance or management, modify forest composition and structure, thereby influencing CWD abundance and distribution. Many studies have compared older forests to forests managed with even-aged silvicultural systems and observed a prolonged period of low CWD occurrence after harvesting. With fine-scale spatial data, our study compares the long-term impacts of light partial harvesting on the CWD structure of eastern deciduous hardwood forests. We mapped and inventoried DDW and SDW using variable radius plots based on a 10 m × 10 m grid throughout an unmanaged, structurally-complex relict forest and two nearby forests that were partially harvested over 46 years ago. The relict stand had significantly larger individual pieces and higher accumulations of DDW and SDW than both of the partially harvested stands. Connectivity of CWD was much higher in the relict stand, which had fewer, larger patches. Larger pieces and higher proportion of decay-resistant species (e.g. Quercus spp. in the relict forest resulted in slower decomposition, greater accumulation and increased connectivity of CWD. Partial harvests, such that occur with selection forestry, are generally considered less disruptive of ecosystem services, but this study highlights the long-term impacts of even light partial harvests on CWD stocks and distribution. When planning harvesting events, forest managers should also consider alternative methods to ensure the sustainability of deadwood resources and function.

  9. Managing harvest and habitat as integrated components

    Science.gov (United States)

    Osnas, Erik; Runge, Michael C.; Mattsson, Brady J.; Austin, Jane E.; Boomer, G. S.; Clark, R. G.; Devers, P.; Eadie, J. M.; Lonsdorf, E. V.; Tavernia, Brian G.

    2014-01-01

    In 2007, several important initiatives in the North American waterfowl management community called for an integrated approach to habitat and harvest management. The essence of the call for integration is that harvest and habitat management affect the same resources, yet exist as separate endeavours with very different regulatory contexts. A common modelling framework could help these management streams to better understand their mutual effects. Particularly, how does successful habitat management increase harvest potential? Also, how do regional habitat programmes and large-scale harvest strategies affect continental population sizes (a metric used to express habitat goals)? In the ensuing five years, several projects took on different aspects of these challenges. While all of these projects are still on-going, and are not yet sufficiently developed to produce guidance for management decisions, they have been influential in expanding the dialogue and producing some important emerging lessons. The first lesson has been that one of the more difficult aspects of integration is not the integration across decision contexts, but the integration across spatial and temporal scales. Habitat management occurs at local and regional scales. Harvest management decisions are made at a continental scale. How do these actions, taken at different scales, combine to influence waterfowl population dynamics at all scales? The second lesson has been that consideration of the interface of habitat and harvest management can generate important insights into the objectives underlying the decision context. Often the objectives are very complex and trade-off against one another. The third lesson follows from the second – if an understanding of the fundamental objectives is paramount, there is no escaping the need for a better understanding of human dimensions, specifically the desires of hunters and nonhunters and the role they play in conservation. In the end, the compelling question is

  10. Energy harvesting with piezoelectric and pyroelectric materials

    CERN Document Server

    Muensit, Nantakan

    2011-01-01

    The purpose of this book is to present the current state of knowledge in the field of energy harvesting using piezoelectric and pyroelectric materials. The book is addressed to students and academics engaged in research in the fields of energy harvesting, material sciences and engineering. Scientists and engineers who are working in the area of energy conservation and renewable energy resources should find it useful as well. Explanations of fundamental physical properties such as piezoelectricity and pyroelectricity are included to aid the understanding of the non-specialist. Specific technolo

  11. Vibration Energy Harvesting Potential for Turbomachinery Applications

    Directory of Open Access Journals (Sweden)

    Adrian STOICESCU

    2018-03-01

    Full Text Available The vibration energy harvesting process represents one of the research directions for increasing power efficiency of electric systems, increasing instrumentation nodes autonomy in hard to reach locations and decreasing total system mass by eliminating cables and higher-power adapters. Research based on the possibility of converting vibration energy into useful electric energy is used to evaluate the potential of its use on turbomachinery applications. Aspects such as the structure and characteristics of piezoelectric generators, harvesting networks, their setup and optimization, are considered. Finally, performance test results are shown using piezoelectric systems on a turbine engine.

  12. Materials in energy conversion, harvesting, and storage

    CERN Document Server

    Lu, Kathy

    2014-01-01

    First authored book to address materials' role in the quest for the next generation of energy materials Energy balance, efficiency, sustainability, and so on, are some of many facets of energy challenges covered in current research. However, there has not been a monograph that directly covers a spectrum of materials issues in the context of energy conversion, harvesting and storage. Addressing one of the most pressing problems of our time, Materials in Energy Conversion, Harvesting, and Storage illuminates the roles and performance requirements of materials in energy an

  13. Electronically droplet energy harvesting using piezoelectric cantilevers

    KAUST Repository

    Al Ahmad, Mahmoud Al

    2012-01-01

    A report is presented on free falling droplet energy harvesting using piezoelectric cantilevers. The harvester incorporates a multimorph clamped-free cantilever which is composed of five layers of lead zirconate titanate piezoelectric thick films. During the impact, the droplet kinetic energy is transferred into the form of mechanical stress forcing the piezoelectric structure to vibrate. Experimental results show energy of 0.3 μJ per droplet. The scenario of moderate falling drop intensity, i.e. 230 drops per second, yields a total energy of 400 μJ. © 2012 The Institution of Engineering and Technology.

  14. Vivaldi Antenna for RF Energy Harvesting

    Directory of Open Access Journals (Sweden)

    J. Schneider

    2016-12-01

    Full Text Available Energy harvesting is a future technology for capturing ambient energy from the environment to be recycled to feed low-power devices. A planar antipodal Vivaldi antenna is presented for gathering energy from GSM, WLAN, UMTS and related applications. The designed antenna has the potential to be used in energy harvesting systems. Moreover, the antenna is suitable for UWB applications, because it operates according to FCC regulations (3.1 – 10.6 GHz. The designed antenna is printed on ARLON 600 substrate and operates in frequency band from 0.810 GHz up to more than 12 GHz. Experimental results show good conformity with simulated performance.

  15. Retention factors in relation to organisational commitment in medical and information technology services

    Directory of Open Access Journals (Sweden)

    Jeannette van Dyk

    2012-07-01

    Research purpose: The objectives of the study were to investigate empirically: (1 the relationship between employees’ satisfaction with organisational retention factors (measured by the Retention Factors Scale and their organisational commitment (measured by the Organisational Commitment Questionnaire and (2 whether gender, age, race and tenure groups differ significantly in terms of these variables. Motivation for the study: Medical and information technology professionals have specialised and hard to replace skills. They also have strong tendencies to leave their organisations and countries. Understanding the retention factors that will increase their organisational commitment may benefit the organisations who want to retain their valuable talent. Research design, approach and method: The researchers used a cross-sectional survey design to collect data from a purposive sample of 206 staff members who had scarce skills in a South African medical and information technology services company. Correlational and inferential statistics were computed to achieve the objectives. Main findings: The results showed that the participants’ satisfaction with retention factors has a significant relationship with their organisational commitment and that the biographical groups differ significantly in terms of the variables. Practical/managerial implications: The measured retention factors were all associated with human resource management practices that influence employees’ intentions to leave. Contribution/value-add: The results are important to managers who are interested in retaining staff who have scarce skills and provide valuable pointers for designing effective retention strategies.

  16. Israeli nurse practice environment characteristics, retention, and job satisfaction.

    Science.gov (United States)

    Dekeyser Ganz, Freda; Toren, Orly

    2014-02-24

    There is an international nursing shortage. Improving the practice environment has been shown to be a successful strategy against this phenomenon, as the practice environment is associated with retention and job satisfaction. The Israeli nurse practice environment has not been measured. The purpose of this study was to measure practice environment characteristics, retention and job satisfaction and to evaluate the association between these variables. A demographic questionnaire, the Practice Environment Scale, and a Job Satisfaction Questionnaire were administered to Israeli acute and intensive care nurses working in 7 hospitals across the country. Retention was measured by intent to leave the organization and work experience. A convenience sample of registered nurses was obtained using a bi-phasic, stratified, cluster design. Data were collected based on the preferences of each unit, either distribution during various shifts or at staff meetings; or via staff mailboxes. Descriptive statistics were used to describe the sample and results of the questionnaires. Pearson Product Moment Correlations were used to determine significant associations among the variables. A multiple regression model was designed where the criterion variable was the practice environment. Analyses of variance determined differences between groups on nurse practice environment characteristics. 610 nurses reported moderate levels of practice environment characteristics, where the lowest scoring characteristic was 'appropriate staffing and resources'. Approximately 9% of the sample reported their intention to leave and the level of job satisfaction was high. A statistically significant, negative, weak correlation was found between intention to leave and practice environment characteristics, with a moderate correlation between job satisfaction and practice environment characteristics. 'Appropriate staffing and resources' was the only characteristic found to be statistically different based on

  17. Helical Piezoelectric Energy Harvester and Its Application to Energy Harvesting Garments

    Directory of Open Access Journals (Sweden)

    Minsung Kim

    2017-04-01

    Full Text Available In this paper, we propose a helical piezoelectric energy harvester, examine its application to clothes in the form of an energy harvesting garment, and analyze its design and characteristics. The helical harvester is composed of an elastic core and a polymer piezoelectric strap twining the core. The fabricated harvester is highly elastic and can be stretched up to 158% of its initial length. Following the experiments using three different designs, the maximum output power is measured as 1.42 mW at a 3 MΩ load resistance and 1 Hz motional frequency. The proposed helical harvesters are applied at four positions of stretchable tight-fitting sportswear, namely shoulder, arm joint, knee, and hip. The maximum output voltage is measured as more than 20 V from the harvester at the knee position during intended body motions. In addition, electric power is also generated from this energy harvesting garment during daily human motions, which is about 3.9 V at the elbow, 3.1 V at the knee, and 4.4 V at the knee during push-up, walking, and squatting motions, respectively.

  18. [A reduction in the invasiveness during surgical revascularization: the harvesting of the great saphenous vein by a video endoscopic technic].

    Science.gov (United States)

    Terrini, A; Graffigna, A; Martinelli, L

    2000-05-01

    The authors report their preliminary experience of endoscopic saphenous vein harvesting as part of a program devoted to reducing the invasivity of surgical myocardial revascularization. This method allows us to minimize the cutaneous incisions in the inferior limbs necessary to harvest the saphenous vein, thus reducing the incidence of complications. The study includes 41 patients who underwent endoscopic saphenous vein harvesting from October 1998 to September 1999 and, as a control group, 20 patients with similar characteristics operated on with the traditional technique during the same period. The variables considered were: the time necessary to harvest the saphenous vein, the incidence of complications, and the postoperative mobilization. All the endoscopically harvested grafts were adequate for the scheduled procedure. The only complication occurred in a patient operated on with the traditional technique. The time of harvesting and the day of mobilization were similar in the two groups. The reduction of surgical trauma allowed a fast deambulation recovery and better esthetic results. When complete arterial revascularization is not feasible, the endoscopic harvesting of the required saphenous vein segment allows for a significant reduction in the invasivity of the procedure.

  19. Water relations in calla lily flower stems harvested at different opening stages(

    Directory of Open Access Journals (Sweden)

    Thais Silva Sales

    2015-12-01

    Full Text Available Cut flowers are a well established product and require conservation techniques that help keep postharvest quality for marketing. In this context, the objective of this study was to evaluate different opening stages of calla lily (Zantedeschia aethiopica cut stems and their influence on posthaverst. Calla lily stems were harvested in the morning, according to the following opening stages: closed spathe, semi-closed spathe (1/3 open, semi-open spathe (2/3 open and fully open spathe. Once selected and standardized, stems were placed in a controlled room at 21 ± 2 °C and relative humidity of 75 ± 5%, for eight days. The evaluations were conducted daily, observing water pH, commercial quality analysis, width and length of the spathe, fresh weight of stem, water absorption and transpiration. The experimental design was completely randomized, with four treatments (opening stages, five replicates and two stems by plot. The model used was split plot in time, with harvest stages as plots, and evaluation days as subplots. Calla lily harvested at closed spathe and semi-closed spathe (1/3 open, showed spathe opening, although it did not achieve fully spathe expansion, had higher water uptake and hydration of flower stems, and increased water retention capacity by floral tissues until saturation, followed by a period of weight reduction caused by transpiration rates greater than absorption.

  20. Forest harvest patterns on private lands in the Cascade Mountains, Washington, USA

    Science.gov (United States)

    Soulard, Christopher E.; Walker, Jessica; Griffith, Glenn E.

    2017-01-01

    Forests in Washington State generate substantial economic revenue from commercial timber harvesting on private lands. To investigate the rates, causes, and spatial and temporal patterns of forest harvest on private tracts throughout the Cascade Mountains, we relied on a new generation of annual land-use/land-cover (LULC) products created from the application of the Continuous Change Detection and Classification (CCDC) algorithm to Landsat satellite imagery collected from 1985 to 2014. We calculated metrics of landscape pattern using patches of intact and harvested forest in each annual layer to identify changes throughout the time series. Patch dynamics revealed four distinct eras of logging trends that align with prevailing regulations and economic conditions. We used multiple logistic regression to determine the biophysical and anthropogenic factors that influence fine-scale selection of harvest stands in each time period. Results show that private lands forest cover became significantly reduced and more fragmented from 1985 to 2014. Variables linked to parameters of site conditions, location, climate, and vegetation greenness consistently distinguished harvest selection for each distinct era. This study demonstrates the utility of annual LULC data for investigating the underlying factors that influence land cover change.

  1. Harvest: an open platform for developing web-based biomedical data discovery and reporting applications.

    Science.gov (United States)

    Pennington, Jeffrey W; Ruth, Byron; Italia, Michael J; Miller, Jeffrey; Wrazien, Stacey; Loutrel, Jennifer G; Crenshaw, E Bryan; White, Peter S

    2014-01-01

    Biomedical researchers share a common challenge of making complex data understandable and accessible as they seek inherent relationships between attributes in disparate data types. Data discovery in this context is limited by a lack of query systems that efficiently show relationships between individual variables, but without the need to navigate underlying data models. We have addressed this need by developing Harvest, an open-source framework of modular components, and using it for the rapid development and deployment of custom data discovery software applications. Harvest incorporates visualizations of highly dimensional data in a web-based interface that promotes rapid exploration and export of any type of biomedical information, without exposing researchers to underlying data models. We evaluated Harvest with two cases: clinical data from pediatric cardiology and demonstration data from the OpenMRS project. Harvest's architecture and public open-source code offer a set of rapid application development tools to build data discovery applications for domain-specific biomedical data repositories. All resources, including the OpenMRS demonstration, can be found at http://harvest.research.chop.edu.

  2. Forest Harvest Patterns on Private Lands in the Cascade Mountains, Washington, USA

    Directory of Open Access Journals (Sweden)

    Christopher E. Soulard

    2017-10-01

    Full Text Available Forests in Washington State generate substantial economic revenue from commercial timber harvesting on private lands. To investigate the rates, causes, and spatial and temporal patterns of forest harvest on private tracts throughout the Cascade Mountains, we relied on a new generation of annual land-use/land-cover (LULC products created from the application of the Continuous Change Detection and Classification (CCDC algorithm to Landsat satellite imagery collected from 1985 to 2014. We calculated metrics of landscape pattern using patches of intact and harvested forest in each annual layer to identify changes throughout the time series. Patch dynamics revealed four distinct eras of logging trends that align with prevailing regulations and economic conditions. We used multiple logistic regression to determine the biophysical and anthropogenic factors that influence fine-scale selection of harvest stands in each time period. Results show that private lands forest cover became significantly reduced and more fragmented from 1985 to 2014. Variables linked to parameters of site conditions, location, climate, and vegetation greenness consistently distinguished harvest selection for each distinct era. This study demonstrates the utility of annual LULC data for investigating the underlying factors that influence land cover change.

  3. Switchgrass, Bermudagrass, Flaccidgrass, and Lovegrass biomass yield response to nitrogen for single and double harvest

    International Nuclear Information System (INIS)

    Aravindhakshan, Sijesh C.; Epplin, Francis M.; Taliaferro, Charles M.

    2011-01-01

    Switchgrass (Panicum virgatum) has been identified as a model dedicated energy crop species. After a perennial grass is established, the major variable costs are for nitrogen (N) fertilizer and harvest. Prior to establishing switchgrass on millions of ha in a particular agro-climatic region, it would be useful to determine switchgrass yield response to N and its response to harvest frequency relative to alternative grass species. The objective of this research is to determine biomass yield response to N for four perennial grass species and to determine the species, N level, and harvest frequency that will maximize expected net returns, given the climate and soils of the U.S.A. Southern Plains. Yield data were produced in an experiment that includes four species (switchgrass, bermudagrass (Cynodon dactylon), weeping lovegrass (Eragrostis curvula), and carostan flaccidgrass (Pennisetum flaccidum)), four N levels, and two harvest levels. Linear response plateau (LRP), linear response stochastic plateau (LRSP), and quadratic response (QR) functions are estimated. For all combinations of biomass and N prices considered, the optimal species is switchgrass. For most price situations, it is economically optimal to fertilize established stands of switchgrass with 69 kg N ha -1 yr -1 and to harvest once yr -1 after senescence.

  4. Switchgrass, Bermudagrass, Flaccidgrass, and Lovegrass biomass yield response to nitrogen for single and double harvest

    Energy Technology Data Exchange (ETDEWEB)

    Aravindhakshan, Sijesh C.; Epplin, Francis M. [Department of Agricultural Economics, Oklahoma State University, Stillwater, OK 74078-6026 (United States); Taliaferro, Charles M. [Department of Plant and Soil Sciences, Oklahoma State University, Stillwater, OK 74078 (United States)

    2011-01-15

    Switchgrass (Panicum virgatum) has been identified as a model dedicated energy crop species. After a perennial grass is established, the major variable costs are for nitrogen (N) fertilizer and harvest. Prior to establishing switchgrass on millions of ha in a particular agro-climatic region, it would be useful to determine switchgrass yield response to N and its response to harvest frequency relative to alternative grass species. The objective of this research is to determine biomass yield response to N for four perennial grass species and to determine the species, N level, and harvest frequency that will maximize expected net returns, given the climate and soils of the U.S.A. Southern Plains. Yield data were produced in an experiment that includes four species (switchgrass, bermudagrass (Cynodon dactylon), weeping lovegrass (Eragrostis curvula), and carostan flaccidgrass (Pennisetum flaccidum)), four N levels, and two harvest levels. Linear response plateau (LRP), linear response stochastic plateau (LRSP), and quadratic response (QR) functions are estimated. For all combinations of biomass and N prices considered, the optimal species is switchgrass. For most price situations, it is economically optimal to fertilize established stands of switchgrass with 69 kg N ha{sup -1} yr{sup -1} and to harvest once yr{sup -1} after senescence. (author)

  5. Radionuclide Retention in Concrete Wasteforms

    Energy Technology Data Exchange (ETDEWEB)

    Bovaird, Chase C.; Jansik, Danielle P.; Wellman, Dawn M.; Wood, Marcus I.

    2011-09-30

    Assessing long-term performance of Category 3 waste cement grouts for radionuclide encasement requires knowledge of the radionuclide-cement interactions and mechanisms of retention (i.e., sorption or precipitation); the mechanism of contaminant release; the significance of contaminant release pathways; how wasteform performance is affected by the full range of environmental conditions within the disposal facility; the process of wasteform aging under conditions that are representative of processes occurring in response to changing environmental conditions within the disposal facility; the effect of wasteform aging on chemical, physical, and radiological properties; and the associated impact on contaminant release. This knowledge will enable accurate prediction of radionuclide fate when the wasteforms come in contact with groundwater. The information present in the report provides data that (1) measures the effect of concrete wasteform properties likely to influence radionuclide migration; and (2) quantifies the rate of carbonation of concrete materials in a simulated vadose zone repository.

  6. Breastfeeding reduces postpartum weight retention

    DEFF Research Database (Denmark)

    Baker, Jennifer Lyn; Gamborg, Michael; Heitmann, Berit L

    2008-01-01

    BACKGROUND: Weight gained during pregnancy and not lost postpartum may contribute to obesity in women of childbearing age. OBJECTIVE: We aimed to determine whether breastfeeding reduces postpartum weight retention (PPWR) in a population among which full breastfeeding is common and breastfeeding...... duration is long. DESIGN: We selected women from the Danish National Birth Cohort who ever breastfed (>98%), and we conducted the interviews at 6 (n = 36 030) and 18 (n = 26 846) mo postpartum. We used regression analyses to investigate whether breastfeeding (scored to account for duration and intensity......) reduced PPWR at 6 and 18 mo after adjustment for maternal prepregnancy body mass index (BMI) and gestational weight gain (GWG). RESULTS: GWG was positively (P postpartum. Breastfeeding was negatively associated with PPWR in all women but those...

  7. NOx retention in scrubbing column

    International Nuclear Information System (INIS)

    Nakazone, A.K.; Costa, R.E.; Lobao, A.S.T.; Matsuda, H.T.; Araujo, B.F.

    1988-07-01

    During the UO 2 dissolution in nitric acid, some different species of NO x are released. The off gas can either be refluxed to the dissolver or be released and retained on special columns. The final composition of the solution is the main parameter to take in account. A process for nitrous gases retention using scubber columns containing H 2 O or diluted HNO 3 is presented. Chemiluminescence measurement was employed to NO x evalution before and after scrubbing. Gas flow, temperature, residence time are the main parameters considered in this paper. For the dissolution of 100g UO 2 in 8M nitric acid, a 6NL/h O 2 flow was the best condition for the NO/NO 2 oxidation with maximum adsorption in the scrubber columns. (author) [pt

  8. Separation and retention of iodine

    International Nuclear Information System (INIS)

    Thomas, T.R.

    1976-01-01

    Caustic and mercuric nitrate scrubbers have been used for iodine recovery from process offgas, but they exhibit low decontamination factors for organic iodide removal and produce liquid wastes that are unsuitable for final storage. The Iodox process gives high decontamination factors for both organic iodides and elemental iodine. The liquid waste can be evaporated to a solid or concentrated and fixed in cement. Efficient separation and retention of gaseous iodine species can be obtained with silver-loaded adsorbents. The waste is a dry solid easily handled and stored. Adsorbents containing cheaper metals appear to have lower iodine-loading capacities and may be unsuitable for bulk iodine removal from process offgas because of the large amounts of solid waste that would be generated. A potential method for regenerationg and recycling silver-loaded adsorbents is being evaluated. In conjunction with the regeneration, lead-exchanged zeolite is used as a secondary adsorbent for the final fixation and storage of the iodine

  9. Predicting health plan member retention from satisfaction surveys: the moderating role of intention and complaint voicing.

    Science.gov (United States)

    Huppertz, John W

    2008-01-01

    Many health plans have tried to increase member retention by improving their scores on customer satisfaction surveys. However, prior research has demonstrated weak relationships between member satisfaction and retention, suggesting that other variables are needed to understand how satisfaction impacts member retention. In a longitudinal study 4,806 health plan members who completed satisfaction surveys were re-assessed three years later; we compared measures of satisfaction, intention, and complaining behavior from voluntary disenrollees and retained members. The relationship between satisfaction and retention was moderated by members' intentions to disenroll. The findings suggest that health plans can enhance the predictive validity of their satisfaction surveys by including measures of both satisfaction and intentions.

  10. A Process-Based Model of TCA Cycle Functioning to Analyze Citrate Accumulation in Pre- and Post-Harvest Fruits.

    Science.gov (United States)

    Etienne, Audrey; Génard, Michel; Bugaud, Christophe

    2015-01-01

    Citrate is one of the most important organic acids in many fruits and its concentration plays a critical role in organoleptic properties. The regulation of citrate accumulation throughout fruit development, and the origins of the phenotypic variability of the citrate concentration within fruit species remain to be clarified. In the present study, we developed a process-based model of citrate accumulation based on a simplified representation of the TCA cycle to predict citrate concentration in fruit pulp during the pre- and post-harvest stages. Banana fruit was taken as a reference because it has the particularity of having post-harvest ripening, during which citrate concentration undergoes substantial changes. The model was calibrated and validated on the two stages, using data sets from three contrasting cultivars in terms of citrate accumulation, and incorporated different fruit load, potassium supply, and harvest dates. The model predicted the pre and post-harvest dynamics of citrate concentration with fairly good accuracy for the three cultivars. The model suggested major differences in TCA cycle functioning among cultivars during post-harvest ripening of banana, and pointed to a potential role for NAD-malic enzyme and mitochondrial malate carriers in the genotypic variability of citrate concentration. The sensitivity of citrate accumulation to growth parameters and temperature differed among cultivars during post-harvest ripening. Finally, the model can be used as a conceptual basis to study citrate accumulation in fleshy fruits and may be a powerful tool to improve our understanding of fruit acidity.

  11. A Process-Based Model of TCA Cycle Functioning to Analyze Citrate Accumulation in Pre- and Post-Harvest Fruits.

    Directory of Open Access Journals (Sweden)

    Audrey Etienne

    Full Text Available Citrate is one of the most important organic acids in many fruits and its concentration plays a critical role in organoleptic properties. The regulation of citrate accumulation throughout fruit development, and the origins of the phenotypic variability of the citrate concentration within fruit species remain to be clarified. In the present study, we developed a process-based model of citrate accumulation based on a simplified representation of the TCA cycle to predict citrate concentration in fruit pulp during the pre- and post-harvest stages. Banana fruit was taken as a reference because it has the particularity of having post-harvest ripening, during which citrate concentration undergoes substantial changes. The model was calibrated and validated on the two stages, using data sets from three contrasting cultivars in terms of citrate accumulation, and incorporated different fruit load, potassium supply, and harvest dates. The model predicted the pre and post-harvest dynamics of citrate concentration with fairly good accuracy for the three cultivars. The model suggested major differences in TCA cycle functioning among cultivars during post-harvest ripening of banana, and pointed to a potential role for NAD-malic enzyme and mitochondrial malate carriers in the genotypic variability of citrate concentration. The sensitivity of citrate accumulation to growth parameters and temperature differed among cultivars during post-harvest ripening. Finally, the model can be used as a conceptual basis to study citrate accumulation in fleshy fruits and may be a powerful tool to improve our understanding of fruit acidity.

  12. Characterization of families of varieties according to the time of harvest at two locations in the central region of Cuba

    Directory of Open Access Journals (Sweden)

    Héctor Jorge

    2014-04-01

    Full Text Available Were evaluated 46 varieties at two locations in the central region of the country in two types of soil, plant cane between 13 and 19 months during the months of November 2010 to May 2011 in the variables t cane / ha,% pol t cane / ha. Three stages were established harvest; cultivars were grouped into families according to their sugar behavior, defining moments of harvest and groups of families of varieties in each harvest period. One Discriminant Factorial Analysis was performed, the qualitative variable used in the first case being the so-called time and the second group of the cultivars. Obtained results allowed the discriminant group the harvest time and the families of varieties for each harvest period with higher percentages of good classification to 75%. The Complete Model confirmed the existence of genotype - environment interaction and quantified a high contribution of the environment, mostly attributed to the towns and the experimental error for cane and pol t / ha, while for the sugar content was the time of harvest. The Reduced Model offered that for t cane / ha Moment in one and three, the variance of genotype - environment interaction was higher than ambient

  13. Assessment of Streamside Management Zones for Conserving Benthic Macroinvertebrate Communities Following Timber Harvest in Eastern Kentucky Headwater Catchments

    Directory of Open Access Journals (Sweden)

    Joshua K. Adkins

    2016-06-01

    Full Text Available Headwater streams generally comprise the majority of stream area in a watershed and can have a strong influence on downstream food webs. Our objective was to determine the effect of altering streamside management zone (SMZ configurations on headwater aquatic insect communities. Timber harvests were implemented within six watersheds in eastern Kentucky. The SMZ configurations varied in width, canopy retention and best management practice (BMP utilization at the watershed scale. Benthic macroinvertebrate samples collected one year before and four years after harvest indicated few differences among treatments, although post-treatment abundance was elevated in some of the treatment streams relative to the unharvested controls. Jaccard index values were similar across SMZ treatments after logging, indicating strong community overlap. These findings suggest that stream invertebrate communities did respond to the timber harvest, though not negatively. Results also suggest that SMZ criteria for aquatic habitats in steeply sloping topography, including at least 50 percent canopy retention and widths of at least 16.8 m, appear to be adequate for protecting benthic macroinvertebrate communities from logging impacts.

  14. Voluntary intake, digestibility and nitrogen utilization by sheep fed ensiled grass clover mixture harvested at three stages of maturity

    Directory of Open Access Journals (Sweden)

    Marina Vranić

    2008-12-01

    Full Text Available The objective of this experiment was to study the effects of grass maturity at harvest on silage ad libitum intake, in vivo digestibility and N retention in wether sheep. The sward was harvested at the stem elongation, tasseling and flowering growth stages of orchardgrass (Dactylis glomerata. Three silages were offered to four Charolais wether sheep in an incomplete change over design with four periods. As the crop matured, there was an increase (P<0.001 in dry matter (DM, organic matter (OM and acid detergent fiber (ADF concentration and a decrease in crude protein (CP concentration (P<0.001. Increasing maturity of grass ensiled showed a linear decrease (P<0.01 in voluntary silage intake of DM, OM, neutral detergent fiber (NDF, a linear decrease (P<0.01 in digestibility of silage DM, OM, NDF, ADF, CP, and a linear decrease in nitrogen balance (P<0.01. No quadratic response was recorded in silage intake, digestibility or N balance. The results suggest that grass maturity at harvest influences the nutritive value of grass silage, in terms of ad libitum intake, in vivo digestibility and N retention in sheep, as a result of changes in chemical composition.

  15. Natural flood retention in mountain areas by forests and forest like short rotation coppices

    Science.gov (United States)

    Reinhardt-Imjela, Christian; Schulte, Achim; Hartwich, Jens

    2017-04-01

    Natural water retention is an important element of flood risk management in flood generating headwater areas in the low mountain ranges of Central Europe. In this context forests are of particular interest because of the high infiltration capacities of the soils and to increase water retention reforestation of agricultural land would be worthwhile. However competing claims for land use in intensely cultivated regions in Central Europe impede reforestation plans so the potential for a significant increase of natural water retention in forests is strongly limited. Nevertheless the development of innovative forms of land use and crop types opens new perspectives for a combination of agricultural land use with the water retention potential of forests. Recently the increasing demand for renewable energy resources leads to the cultivation of fast growing poplar and willow hybrids on agricultural land in short rotation coppices (SRC). Harvested in cycles of three to six years the wood from the plantations can be used as wood chips for heat and electricity production in specialized power plants. With short rotation plantations a crop type is established on arable land which is similar to forests so that an improvement of water retention can be expected. To what extend SRC may contribute to flood attenuation in headwater areas is investigated for the Chemnitzbach watershed (48 km2) in the Eastern Ore Mountains (Free State of Saxony, Germany), a low mountain range which is an important source of flood runoff in the Elbe basin. The study is based on a rainfall-runoff model of flood events using the conceptual modelling system NASIM. First results reveal a significant reduction of the flood peaks after the implementation of short rotation coppices. However the effect strongly depends on two factors. The first factor is the availability of areas for the plantations. For a substantial impact on the watershed scale large areas are required and with decreasing percentages of SRC

  16. Effects of practice variability on unimanual arm rotation.

    Science.gov (United States)

    James, Eric G; Conatser, Phillip

    2014-01-01

    High variability practice has been found to lead to a higher rate of motor learning than low variability practice in sports tasks. The authors compared the effects of low and high levels of practice variability on a simple unimanual arm rotation task. Participants performed rhythmic unimanual internal-external arm rotation as smoothly as possible before and after 2 weeks of low (LV) or high (HV) variability practice and after a 2-week retention interval. Compared to the pretest, the HV group significantly decreased hand, radioulnar, and shoulder rotation jerk on the retention test and shoulder jerk on the posttest. After training the LV group had lower radioulnar and shoulder jerk on the posttest but not the retention test. The results supported the hypothesis that high variability practice would lead to greater learning and reminiscence than low variability practice and the theoretical prediction of a bifurcation in the motor learning dynamics.

  17. 12 CFR 609.945 - Records retention.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Records retention. 609.945 Section 609.945 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM ELECTRONIC COMMERCE Standards for Boards and Management § 609.945 Records retention. Records stored electronically must be accurate, accessible...

  18. Black Student Retention in Higher Education.

    Science.gov (United States)

    Lang, Marvel, Ed.; Ford, Clinita A., Ed.

    This collection focuses on problems in the recruitment, enrollment and retention of Blacks in higher education in America. The following chapters are provided: "The Black Student Retention Problem in Higher Education: Some Introductory Perspectives" (Marvel Lang); "Early Acceptance and Institutional Linkages in a Model Program of Recruitment,…

  19. 76 FR 34010 - Credit Risk Retention

    Science.gov (United States)

    2011-06-10

    ... 2501-AD53 Credit Risk Retention AGENCIES: Office of the Comptroller of the Currency, Treasury (OCC... credit risk retention requirements of section 15G of the Securities Exchange Act of 1934, as added by the Dodd-Frank Wall Street Reform and Consumer Protection Act (``Credit Risk NPR'' or ``proposed rule...

  20. African Retentions in Blues and Jazz.

    Science.gov (United States)

    Meadows, Eddie S.

    1979-01-01

    The perseverance of African musical characteristics among American Blacks is an historic reality. African retentions have been recorded in Black music of the antebellum period. Various African scales and rhythms permeate Black American music today as evidenced in the retentions found in blues and jazz. (RLV)

  1. Emotional Intelligence and Nursing Student Retention

    Science.gov (United States)

    Wilson, Victoria Jane

    2013-01-01

    The study examined the constructs of a Multi-Intelligence Model of Retention with four constructs: cognitive and emotional-social intelligence, student characteristics, and environmental factors. Data were obtained from sophomore students entering two diploma, nine associate, and five baccalaureate nursing programs. One year later, retention and…

  2. A Model for Freshman Engineering Retention

    Science.gov (United States)

    Veenstra, Cindy P.; Dey, Eric L.; Herrin, Gary D.

    2009-01-01

    With the current concern over the growing need for more engineers, there is an immediate need to improve freshman engineering retention. A working model for freshman engineering retention is needed. This paper proposes such a model based on Tinto's Interactionalist Theory. Emphasis in this model is placed on pre-college characteristics as…

  3. Employee Retention Strategies And Organizational Performance ...

    African Journals Online (AJOL)

    Implication of the results for practice is that any organization that fails to put in place adequate employee retention strategies is not likely to retain competent and motivated workforce in its employment and hence experience frequent labour turnover and poor organizational performance. Keywords: Employees, Retention ...

  4. Faculty Personality: A Factor of Student Retention

    Science.gov (United States)

    Shaw, Cassandra S.; Wu, Xiaodong; Irwin, Kathleen C.; Patrizi, L. A. Chad

    2016-01-01

    The purpose of this study was to determine the relationship between student retention and faculty personality as it was hypothesized that faculty personality has an effect on student retention. The methodology adopted for this study was quantitative and in two parts 1) using linear regression models to examine the impact or causality of faculty…

  5. Minority Teacher Recruitment and Retention Strategies

    Science.gov (United States)

    Kearney-Gissendaner, Janet E.

    2010-01-01

    The tools and resources in this book help school leaders seamlessly incorporate minority teacher recruitment and retention programs into current human-resources activities. With details about exemplary minority teacher recruitment and retention programs, this book also showcases strategies for how to replicate such programs in your own school or…

  6. Herpes zoster-induced acute urinary retention.

    Science.gov (United States)

    Addison, Ben; Harvey, Martyn

    2013-06-01

    Urinary retention is a common acute presentation for men in their later decades. Potential contributing pathologies are numerous. We report an unusual case of acute urinary retention requiring catheterisation secondary to sacral herpes zoster reactivation (S2-4) in an 88-year-old man with minimal preceding obstructive symptoms. © 2013 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

  7. Economics of residue harvest: Regional partnership evaluation

    Science.gov (United States)

    Economic analyses on the viability of corn (Zea mays, L.) stover harvest for bioenergy production have largely been based on simulation modeling. While some studies have utilized field research data, most field-based analyses have included a limited number of sites and a narrow geographic distributi...

  8. Piezoelectric energy harvesting through shear mode operation

    International Nuclear Information System (INIS)

    Malakooti, Mohammad H; Sodano, Henry A

    2015-01-01

    Piezoelectric materials are excellent candidates for use in energy harvesting applications due to their high electromechanical coupling properties that enable them to convert input mechanical energy into useful electric power. The electromechanical coupling coefficient of the piezoelectric material is one of the most significant parameters affecting energy conversion and is dependent on the piezoelectric mode of operation. In most piezoceramics, the d 15 piezoelectric shear coefficient is the highest coefficient compared to the commonly used axial and transverse modes that utilize the d 33 and the d 31 piezoelectric strain coefficients. However, complicated electroding methods and challenges in evaluating the performance of energy harvesting devices operating in the shear mode have slowed research in this area. The shear deformation of a piezoelectric layer can be induced in a vibrating sandwich beam with a piezoelectric core. Here, a model based on Timoshenko beam theory is developed to predict the electric power output from a cantilever piezoelectric sandwich beam under base excitations. It is shown that the energy harvester operating in the shear mode is able to generate ∼50% more power compared to the transverse mode for a numerical case study. Reduced models of both shear and transverse energy harvesters are obtained to determine the optimal load resistance in the system and perform an efficiency comparison between two models with fixed and adaptive resistances. (paper)

  9. 50 CFR 640.21 - Harvest limitations.

    Science.gov (United States)

    2010-10-01

    ... § 640.21 Harvest limitations. (a) Berried lobsters. A berried (egg-bearing) spiny lobster or slipper...) Undersized attractants. A live spiny lobster under the minimum size limit specified in paragraph (b)(1) of... future use as an attractant in a trap provided it is held in a live well aboard the vessel. No more than...

  10. Biofortified varieties released under HarvestPlus

    African Journals Online (AJOL)

    Chapter 5: Annex 1 - Biofortified varieties released under HarvestPlus (as of December 2016). Crop. Micronutrient. Country. Variety. Year of Release. Origin. Type. Baseline. (ppm). Target increment. (ppm). Increment. (ppm). % Target. Increment. (ppm). Micronutrient. Content. (ppm). 11940. BRRI dhan64. 2014. BRRI. Boro.

  11. Piezoelectric energy harvester under parquet floor

    Science.gov (United States)

    Bischur, E.; Schwesinger, N.

    2011-03-01

    The design, fabrication and testing of piezoelectric energy harvesting modules for floors is described. These modules are used beneath a parquet floor to harvest the energy of people walking over it. The harvesting modules consist of monoaxial stretched PVDF-foils. Multilayer modules are built up as roller-type capacitors. The fabrication process of the harvesting modules is simple and very suitable for mass production. Due to the use of organic polymers, the modules are characterized by a great flexibility and the possibility to create them in almost any geometrical size. The energy yield was determined depending on the dynamic loading force, the thickness of piezoelectric active material, the size of the piezoelectric modules, their alignment in the walking direction and their position on the floor. An increase of the energy yield at higher loading forces and higher thicknesses of the modules was observed. It was possible to generate up to 2.1mWs of electric energy with dynamic loads of 70kg using a specific module design. Furthermore a test floor was assembled to determine the influence of the size, alignment and position of the modules on the energy yield.

  12. Machine rates for selected forest harvesting machines

    Science.gov (United States)

    R.W. Brinker; J. Kinard; Robert Rummer; B. Lanford

    2002-01-01

    Very little new literature has been published on the subject of machine rates and machine cost analysis since 1989 when the Alabama Agricultural Experiment Station Circular 296, Machine Rates for Selected Forest Harvesting Machines, was originally published. Many machines discussed in the original publication have undergone substantial changes in various aspects, not...

  13. MEMS-Based Waste Vibrational Energy Harvesters

    Science.gov (United States)

    2013-06-01

    MEMS energy- harvesting device. Although PZT is used more prevalently due to its higher piezoelectric coefficient and dielectric constant, AlN has...7 1. Lead Zirconium Titanate ( PZT ) .........................................................7 2. Aluminum...Laboratory PiezoMUMPS Piezoelectric Multi-User MEMS Processes PZT Lead Zirconate Titanate SEM Scanning Electron Microscopy SiO2 Silicon

  14. Natural strategies for photosynthetic light harvesting

    NARCIS (Netherlands)

    Croce, R.; van Amerongen, H.

    2014-01-01

    Photosynthetic organisms are crucial for life on Earth as they provide food and oxygen and are at the basis of most energy resources. They have a large variety of light-harvesting strategies that allow them to live nearly everywhere where sunlight can penetrate. They have adapted their pigmentation

  15. Endovascular vein harvest: systemic carbon dioxide absorption.

    Science.gov (United States)

    Maslow, Andrew M; Schwartz, Carl S; Bert, Arthur; Hurlburt, Peter; Gough, Jeffrey; Stearns, Gary; Singh, Arun K

    2006-06-01

    Endovascular vein harvest (EDVH) requires CO(2) insufflation to expand the subcutaneous space, allowing visualization and dissection of the saphenous vein. The purpose of this study was to assess the extent of CO(2) absorption during EDVH. Prospective observational study. Single tertiary care hospital. Sixty patients (30 EDVH and 30 open-vein harvest) undergoing isolated coronary artery bypass graft surgery. Hemodynamic, procedural, and laboratory data were collected prior to (baseline), during, and at it the conclusion (final) of vein harvesting. Data were also collected during cardiopulmonary bypass (CPB). Data were compared by using t tests, analysis of variance, and correlation statistics when needed. There were significant increases in arterial CO(2) (PaCO(2), 35%) and decreases in pH (1.35%) during EDVH. These were associated with increases in heart rate, mean blood pressure, and cardiac output. Within the EDVH group, greater elevations (>10 mmHg) in PaCO2 were more likely during difficult harvest procedures, and these patients exhibited greater increase in heart rate. Elevated CO(2) persisted during CPB, requiring higher systemic gas flows and greater use of phenylephrine to maintain desired hemodynamics. EDVH was associated with systemic absorption of CO(2). Greater absorption was more likely in difficult procedures and was associated with greater hemodynamic changes requiring medical therapy.

  16. Precautionary harvest policies and the uncertainty paradox

    NARCIS (Netherlands)

    Cadrin, S.X.; Pastoors, M.A.

    2008-01-01

    Elements of the precautionary approach to fishery management are commonly implemented in the form of harvest control rules, with limit, threshold and target reference points for stock size and fishing mortality. However, a review of two large advisory and management systems indicates that many stock

  17. Energy harvesting through piezoelectricity - technology foresight

    DEFF Research Database (Denmark)

    Laumann, Felix; Sørensen, Mette Møller; Hansen, Tina Mølholm

    2017-01-01

    scientific articles. In contrast to this, is found a low level of ability to convert the technology from academia to commercialization. A decision making model is proposed including a requirement for better understanding of niches, niche definitions and configuration of energy harvesting design...

  18. Harvesting urban resources towards more resilient cities

    NARCIS (Netherlands)

    Agudelo Vera, C.M.; Leduc, W.R.W.A.; Mels, A.R.; Rijnaarts, H.H.M.

    2012-01-01

    With accelerating global changes, cities have to cope with growing pressures, especially for resource supply. Cities may be considered as resources reservoirs and producers of secondary resources. This paper introduces the concept of urban harvesting as a management tool to change inefficient linear

  19. A piezoelectric device for impact energy harvesting

    International Nuclear Information System (INIS)

    Jacquelin, E; Adhikari, S; Friswell, M I

    2011-01-01

    This paper studies a piezoelectric impact energy harvesting device consisting of two piezoelectric beams and a seismic mass. The aim of this work is to find the influence of several mechanical design parameters on the output power of such a harvester so as to optimize its performance; the electrical design parameters were not studied. To account for the dynamics of the beams, a model including the mechanical and piezoelectric properties of the system is proposed. The impacts involved in the energy harvesting process are described through a Hertzian contact law that requires a time domain simulation to solve the nonlinear equations. A transient regime and a steady-state regime have been identified and the performance of the device is characterized by the steady-state mean electrical power and the transient electrical power. The time simulations have been used to study the influence of various mechanical design parameters (seismic mass, beam length, gap, gliding length, impact location) on the performance of the system. It has been shown that the impact location is an important parameter and may be optimized only through simulation. The models and the simulation technique used in this work are general and may be used to assess any other impact energy harvesting device

  20. Holistic Sustainability Assessment of Agricultural Rainwater Harvesting

    Science.gov (United States)

    We present a methodology for holistic sustainability assessment of green infrastructure, applied to agricultural rainwater harvesting (RWH) in the Albemarle-Pamlico river basin. It builds upon prior work in the region through the use of detailed, crop-level management information...

  1. Post-harvest Proteomics and Food Security

    NARCIS (Netherlands)

    Pedreschi Plasencia, R.P.; Lurie, S.; Hertog, W.; Nicolai, B.; Mes, J.J.; Woltering, E.J.

    2013-01-01

    To guarantee sufficient food supply for a growing world population, efforts towards improving crop yield and plant resistance should be complemented with efforts to reduce postharvest losses. Post-harvest losses are substantial and occur at different stages of the food chain in developed and

  2. Assessing the Harvest Maturity of Brazilian Mangoes

    NARCIS (Netherlands)

    Pereira, T.; Tijskens, L.M.M.; Vanoli, M.; Rizzolo, A.; Eccher Zerbini, P.C.; Torricelli, A.; Filgueiras, H.; Spinelli, L.

    2010-01-01

    No clear criterion exists to determine the optimum time to harvest mango. Some empirical relations are used to assess maturity, such as shoulder development. Moreover, as a result of the typical growing conditions in tropical climates, a huge variation in maturity and ripeness exists, seriously

  3. Harvesting microalgae with microwave synthesized magnetic microparticles

    Czech Academy of Sciences Publication Activity Database

    Procházková, G.; Šafařík, Ivo; Brányik, T.

    2013-01-01

    Roč. 130, FEB (2013), s. 472-477 ISSN 0960-8524 R&D Projects: GA MŠk LH12190 Institutional support: RVO:67179843 Keywords : harvesting microalgae * iron oxide magnetic microparticles * non-covalent interactions * microwave treatment * cell demagnetization Subject RIV: EI - Biotechnology ; Bionics Impact factor: 5.039, year: 2013

  4. Harvesting sunlight energy: a biophysics approach

    CSIR Research Space (South Africa)

    Smit, Jacoba E

    2011-04-01

    Full Text Available centre chlorophyll molecule where charge separation occurs in less than 100 ps and at about 95% efficiency. It has been shown that organised connective light harvesting complexes are required for long range energy transfer. By extracting these system...

  5. Carbon sequestration in harvested wood products

    Science.gov (United States)

    K. Skog

    2013-01-01

    Carbon is continuously cycled among these storage pools and between forest ecosystems and the atmosphere as a result of biological processes in forests (e.g., photosynthesis, respiration, growth, mortality, decomposition, and disturbances such as fires or pest outbreaks) and anthropogenic activities (e.g., harvesting, thinning, clearing, and replanting). As trees...

  6. Novel word retention in sequential bilingual children.

    Science.gov (United States)

    Kan, Pui Fong

    2014-03-01

    Children's ability to learn and retain new words is fundamental to their vocabulary development. This study examined word retention in children learning a home language (L1) from birth and a second language (L2) in preschool settings. Participants were presented with sixteen novel words in L1 and in L2 and were tested for retention after either a 2-month or a 4-month delay. Results showed that children retained more words in L1 than in L2 for both of the retention interval conditions. In addition, children's word retention was associated with their existing language knowledge and their fast-mapping performance within and across language. The patterns of association, however, were different between L1 and L2. These findings suggest that children's word retention might be related to the interactions of various components that are operating within a dynamic system.

  7. Estimation of sport fish harvest for risk and hazard assessment of environmental contaminants

    International Nuclear Information System (INIS)

    Poston, T.M.; Strenge, D.L.

    1989-01-01

    Consumption of contaminated fish flesh can be a significant route of human exposure to hazardous chemicals. Estimation of exposure resulting from the consumption of fish requires knowledge of fish consumption and contaminant levels in the edible portion of fish. Realistic figures of sport fish harvest are needed to estimate consumption. Estimates of freshwater sport fish harvest were developed from a review of 72 articles and reports. Descriptive statistics based on fishing pressure were derived from harvest data for four distinct groups of freshwater sport fish in three water types: streams, lakes, and reservoirs. Regression equations were developed to relate harvest to surface area fished where data bases were sufficiently large. Other aspects of estimating human exposure to contaminants in fish flesh that are discussed include use of bioaccumulation factors for trace metals and organic compounds. Using the bioaccumulation factor and the concentration of contaminants in water as variables in the exposure equation may also lead to less precise estimates of tissue concentration. For instance, muscle levels of contaminants may not increase proportionately with increases in water concentrations, leading to overestimation of risk. In addition, estimates of water concentration may be variable or expressed in a manner that does not truly represent biological availability of the contaminant. These factors are discussed. 45 refs., 1 fig., 7 tabs

  8. Preliminary design of a coffee harvester

    Directory of Open Access Journals (Sweden)

    Raphael Magalhães Gomes Moreira

    2016-10-01

    Full Text Available Design of an agricultural machine is a highly complex process due to interactions between the operator, machine, and environment. Mountain coffee plantations constitute an economic sector that requires huge investments for the development of agricultural machinery to improve the harvesting and post-harvesting processes and to overcome the scarcity of work forces in the fields. The aim of this study was to develop a preliminary design for a virtual prototype of a coffee fruit harvester. In this study, a project methodology was applied and adapted for the development of the following steps: project planning, informational design, conceptual design, and preliminary design. The construction of a morphological matrix made it possible to obtain a list of different mechanisms with specific functions. The union between these mechanisms resulted in variants, which were weighed to attribute scores for each selected criterion. From each designated proposal, two variants with the best scores were selected and this permitted the preparation of the preliminary design of both variants. The archetype was divided in two parts, namely the hydraulically articulated arms and the harvesting system that consisted of the vibration mechanism and the detachment mechanism. The proposed innovation involves the use of parallel rods, which were fixed in a plane and rectangular metal sheet. In this step, dimensions including a maximum length of 4.7 m, a minimum length of 3.3 m, and a total height of 2.15 m were identified based on the functioning of the harvester in relation to the coupling point of the tractor.

  9. 75 FR 65599 - Migratory Bird Subsistence Harvest in Alaska; Harvest Regulations for Migratory Birds in Alaska...

    Science.gov (United States)

    2010-10-26

    ...: April 2-May 31 and July 1-August 31. (ii) Closure: June 1-30. (k) Cook Inlet (Harvest area: portions of... Steller's eiders to be taken no longer exists. Dated: October 7, 2010. Thomas L. Strickland, Assistant...

  10. Predictors of retention among HIV/hemophilia health care professionals.

    Science.gov (United States)

    Brown, Larry K; Schultz, Janet R; Forsberg, Ann D; King, Gary; Kocik, Susan M; Butler, Regina B

    2002-01-01

    Health care professionals working with individuals with chronic medical illness, especially those infected with the Human Immunodeficiency Virus (HIV), may be at risk for burnout and departure due to various job stresses such as the death of patients and social stigma. Factors that prevent burnout and employee attrition are seldom studied. Two hundred thirteen staff (doctors, nurses and mental health workers) at a representative sample of Hemophilia Treatment Centers (HTC) completed instruments to measure Burnout (Maslach Burnout Inventory), and perceived job stresses and satisfaction (job tasks, interactions with colleagues and patient care). The staff were surveyed again after two years and their job status determined after 4 years. After 4 years, 35% of the staff had left the field of Hemophilia/HIV care. Univariate tests found that retention was significantly associated with initial job satisfaction, being married and low levels of stress with colleagues. Burnout, as measured by the Maslach Burnout Inventory, at baseline, was unrelated to job retention over 4 years. An adjusted multiple logistic regression of all significant variables found that colleague support was most related to retention (OR=2.8, CI=1.49,5.1). We conclude that attrition of highly trained staff is a significant issue for patients and HTCs. These data suggest the important role that a well-functioning team can have in buffering the inevitable stresses associated with HIV care. Mental Health professionals have considerable expertise in addressing these issues.

  11. Endoscopic Radial Artery Harvest for Coronary Artery Bypass Surgery

    Directory of Open Access Journals (Sweden)

    Kuan-Ming Chiu

    2006-01-01

    Conclusion: Endoscopic harvest of the radial artery is technically demanding, but excellent results can be achieved. The endoscopic approach can provide suitable conduits in a less invasive way than the open harvest technique.

  12. Design guidelines of triboelectric nanogenerator for water wave energy harvesters

    KAUST Repository

    Ahmed, Abdelsalam

    2017-04-11

    Ocean waves are one of the cleanest and most abundant energy sources on earth, and wave energy has the potential for future power generation. Triboelectric nanogenerator (TENG) technology has recently been proposed as a promising technology to harvest wave energy. In this paper, a theoretical study is performed on a duck-shaped TENG wave harvester recently introduced in our work. To enhance the design of the duck-shaped TENG wave harvester, the mechanical and electrical characteristics of the harvester\\'s overall structure, as well as its inner configuration, are analyzed, respectively, under different wave conditions, to optimize parameters such as duck radius and mass. Furthermore, a comprehensive hybrid 3D model is introduced to quantify the performance of the TENG wave harvester. Finally, the influence of different TENG parameters is validated by comparing the performance of several existing TENG wave harvesters. This study can be applied as a guideline for enhancing the performance of TENG wave energy harvesters.

  13. Workplane Illuminance Estimation for Robust Daylight Harvesting Lighting Control

    NARCIS (Netherlands)

    Zhang, S.; Birru, D.

    2012-01-01

    Daylight harvesting lighting controls can provide significant energysavings in daylit spaces. However, their performance is affected bythe changing lighting distribution in the space due to window treatments and the sun. Such impacts reduce the field performance of daylight harvesting dimming

  14. Energy Harvesting in Heterogeneous Networks with Hybrid Powered Communication Systems

    KAUST Repository

    Alsharoa, Ahmad; Celik, Abdulkadir; Kamal, Ahmed E.

    2018-01-01

    In this paper, we investigate an energy efficient and energy harvesting (EH) system model in heterogeneous networks (HetNets) where all base stations (BSS) are equipped to harvest energy from renewable energy sources. We consider a hybrid power

  15. Influence of planting and harvesting dates on sweet potato yield ...

    African Journals Online (AJOL)

    home

    Two experiments were conducted to study the influence of harvesting date on three sweet potato ... determining whole top yields above ground level. .... plant storage organ (which in this case is the root) prior to harvesting and processing for.

  16. Comparison of the chemical quality of rainwater harvested from roof ...

    African Journals Online (AJOL)

    2018-04-02

    Apr 2, 2018 ... 4, place Jussieu 75252 Paris Cedex 05, France ... Keywords: rainwater harvesting, roof-harvested rainwater, pollution, human health, food security, ... Received 18 December 2015; accepted in revised form 26 March 2018.

  17. High relative humidity pre-harvest reduces post-harvest proliferation of Salmonella in tomatoes.

    Science.gov (United States)

    Devleesschauwer, Brecht; Marvasi, Massimiliano; Giurcanu, Mihai C; Hochmuth, George J; Speybroeck, Niko; Havelaar, Arie H; Teplitski, Max

    2017-09-01

    Outbreaks of human illness caused by enteric pathogens such as Salmonella are increasingly linked to the consumption of fruits and vegetables. Knowledge on the factors affecting Salmonella proliferation on fresh produce therefore becomes increasingly important to safeguard public health. Previous experiments showed a limited impact of pre-harvest production practices on Salmonella proliferation on tomatoes, but suggested a significant effect of harvest time. We explored the data from two previously published and one unpublished experiment using regression trees, which allowed overcoming the interpretational difficulties of classical statistical models with higher order interactions. We assessed the effect of harvest time by explicitly modeling the climatic conditions at harvest time and by performing confirmatory laboratory experiments. Across all datasets, regression trees confirmed the dominant effect of harvest time on Salmonella proliferation, with humidity-related factors emerging as the most important underlying climatic factors. High relative humidity the week prior to harvest was consistently associated with lower Salmonella proliferation. A controlled lab experiment confirmed that tomatoes containing their native epimicrobiota supported significantly lower Salmonella proliferation when incubated at higher humidity prior to inoculation. The complex interactions between environmental conditions and the native microbiota of the tomato crop remain to be fully understood. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Energy Harvesting From Low Frequency Applications Using Piezoelectric Materials

    Energy Technology Data Exchange (ETDEWEB)

    Li, Huidong; Tian, Chuan; Deng, Zhiqun

    2014-11-06

    This paper reviewed the state of research on piezoelectric energy harvesters. Various types of harvester configurations, piezoelectric materials, and techniques used to improve the mechanical-to-electrical energy conversion efficiency were discussed. Most of the piezoelectric energy harvesters studied today have focused on scavenging mechanical energy from vibration sources due to their abundance in both natural and industrial environments. Cantilever beams have been the most studied structure for piezoelectric energy harvester to date because of the high responsiveness to small vibrations.

  19. Energy harvesting autonomous sensor systems design, analysis, and practical implementation

    CERN Document Server

    Tan, Yen Kheng

    2013-01-01

    This book is the considered the first to describe sensor-oriented energy harvesting issues. Its content is derived from the author's research on the development of a truly self-autonomous and sustainable energy harvesting wireless sensor network (EH-WSN). This network harvests energy from a variety of ambient energy sources and converts it into electrical energy to power batteries. The book discusses various types of energy harvesting (EH) systems and their respective main components.

  20. Effect of photo-selective nettings on post-harvest quality and bioactive compounds in selected tomato cultivars.

    Science.gov (United States)

    Selahle, Maphoko Kamogelo; Sivakumar, Dharini; Soundy, Puffy

    2014-08-01

    Photo-selective coloured netting is referred to as a 'new agro-technological' concept adopted to manipulate light quality changes that can induce favourable responses in plants. Tomato (Solanum lycopersicum L.) cultivars AlvaV, Irit and SCX 248 grown under the black net (commercial net, 25% shading) showed higher weight loss, loss of firmness, ascorbic acid content and decline in the ratio of soluble solids content/titrable acidity during post-harvest storage (low-temperature storage at 10°C and 90% relative humidity for 21 days followed by market shelf conditions at 25°C for 2 days). During post-harvest storage, lycopene, β-carotene, total phenolic content and antioxidant scavenging activity were higher in cvs AlfaV and Irit grown under the black or pearl nets. However, the β-carotene, total phenolic content and antioxidant scavenging activity were higher in SCX 248 grown under the red net during post-harvest storage. Cultivar AlfaV grown under the red and pearl nets had a higher number of odour active aroma compounds during post-harvest storage. Panellists preferred cv. AlfaV grown under the pearl nets after storage based on taste, overall appearance and firm textured fruits. Pearl photo-selective nets retained the overall fruit quality and bioactive components in cvs AlfaV and Irit during post-harvest storage. Red photo-selective nets, however, showed greater influence on retention of overall fruit quality and bioactive compounds in cv. SCX 248 during post-harvest storage. © 2013 Society of Chemical Industry.

  1. Effect of harvest date and stalk section on selected strength ...

    African Journals Online (AJOL)

    Background: The time required to harvest plant crops is important to the plant properties. It is affected by design of the harvest equipment and the desire for high-quality products with low energy usage. Materials and Methods: Strength characteristics of Origanum onites L., an important medicinal aromatic plant, harvested on ...

  2. Simulating cut-to-length harvesting operations in Appalachian hardwoods

    Science.gov (United States)

    Jingxin Wang; Chris B. LeDoux; Yaoxiang Li

    2005-01-01

    Cut-to-length (CTL) harvesting systems involving small and large harvesters and a forwarder were simulated using a modular computer simulation model. The two harvesters simulated were a modified John Deere 988 tracked excavator with a single grip sawhead and a Timbco T425 based excavator with a single grip sawhead. The forwarder used in the simulations was a Valmet 524...

  3. PRESTO: online calculation of carbon in harvested wood products

    Science.gov (United States)

    Coeli M. Hoover; Sarah J. Beukema; Donald C.E. Robinson; Katherine M. Kellock; Diana A. Abraham

    2014-01-01

    Carbon stored in harvested wood products is recognized under international carbon accounting protocols, and some crediting systems may permit the inclusion of harvested wood products when calculating carbon sequestration. For managers and landowners, however, estimating carbon stored in harvested wood products may be difficult. PRESTO (PRoduct EStimation Tool Online)...

  4. Evaluating timber harvesting impacts on wildlife habitat suitability using FOREX

    Science.gov (United States)

    Chris B. LeDoux

    1997-01-01

    Precommercial, commercial, and final harvesting operations can impact wildlife habitat suitability by altering the vegetation composition on a given site. Harvesting operations remove trees and many times provide the necessary perturbation to trigger successional conditions different from those that existed prior to the harvest. Although these new successional changes...

  5. Increasing global crop harvest frequency: recent trends and future directions

    International Nuclear Information System (INIS)

    Ray, Deepak K; Foley, Jonathan A

    2013-01-01

    The world’s agricultural systems face the challenge of meeting the rising demands from population growth, changing dietary preferences, and expanding biofuel use. Previous studies have put forward strategies for meeting this growing demand by increasing global crop production, either expanding the area under cultivation or intensifying the crop yields of our existing agricultural lands. However, another possible means for increasing global crop production has received less attention: increasing the frequency of global cropland harvested each year. Historically, many of the world’s croplands were left fallow, or had failed harvests, each year, foregoing opportunities for delivering crop production. Furthermore, many regions, particularly in the tropics, may be capable of multiple harvests per year, often more than are harvested today. Here we analyze a global compilation of agricultural statistics to show how the world’s harvested cropland has changed. Between 2000 and 2011, harvested land area grew roughly 4 times faster than total standing cropland area. Using a metric of cropland harvest frequency (CHF)—the ratio of land harvested each year to the total standing cropland—and its recent trends, we identify countries that harvest their croplands more frequently, and those that have the potential to increase their cropland harvest frequency. We suggest that a possible ‘harvest gap’ may exist in many countries that represents an opportunity to increase crop production on existing agricultural lands. However, increasing the harvest frequency of existing croplands could have significant environmental and social impacts, which need careful evaluation. (letter)

  6. Relationship Between Site Disturbance and Forest Harvesting Equipment Traffic

    Science.gov (United States)

    Tim McDonald; Emily Carter; Steve Taylor; John Tobert

    1998-01-01

    A study was done to evaluate the use of global positioning systems (GPS) to track the position of forest harvesting equipment and use the information to assess site impacts. GPS units were attached to tree-length harvesting machinery in two clearcuts (1 feller-buncher, 2 skidders). Position of the equipment was recorded at 2-second intervals throughout the harvest of...

  7. An autonomous robot for harvesting cucumbers in greenhouses

    NARCIS (Netherlands)

    Henten, van E.J.; Hemming, J.; Tuijl, van B.A.J.; Kornet, J.G.; Meuleman, J.; Bontsema, J.; Os, van E.A.

    2002-01-01

    This paper describes the concept of an autonomous robot for harvesting cucumbers in greenhouses. A description is given of the working environment of the robot and the logistics of harvesting. It is stated that for a 2 ha Dutch nursery, 4 harvesting robots and one docking station are needed during

  8. Pulsating variables

    International Nuclear Information System (INIS)

    1989-01-01

    The study of stellar pulsations is a major route to the understanding of stellar structure and evolution. At the South African Astronomical Observatory (SAAO) the following stellar pulsation studies were undertaken: rapidly oscillating Ap stars; solar-like oscillations in stars; 8-Scuti type variability in a classical Am star; Beta Cephei variables; a pulsating white dwarf and its companion; RR Lyrae variables and galactic Cepheids. 4 figs

  9. Irradiation as an alternative post harvest treatment

    Energy Technology Data Exchange (ETDEWEB)

    Satin, M. [Agricultural Industries and Post-harvest Management Service, FAO, Rome (Italy); Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

  10. Irradiation as an alternative post harvest treatment

    Energy Technology Data Exchange (ETDEWEB)

    Satin, M [Agricultural Industries and Post-harvest Management Service, FAO, Rome (Italy); Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

  11. Irradiation as an alternative post harvest treatment

    International Nuclear Information System (INIS)

    Satin, M.; Loaharanu, P.

    1997-01-01

    This current world population has significantly added to the pressures placed upon our finite resources and our resulting ability to feed ourselves. In order to cope with current and future demands, the two established lines of action, that is, reduced population growth and expansion of agricultural production, must be supplemented with the parallel activity of reducing food losses during and after harvest. For developing countries in particular, enormous post-harvest losses result from spillage, contamination, pests and physiological deterioration during storage. Studies in these countries indicate that post-harvest losses are enormous and amount to tens of millions of tons per year valued at billions of dollars. Programs to reduce post-harvest losses, if applied properly, can result in realistic yield increases between 10 and 30%, which can be directly converted into increased consumption for humans. Post-harvest losses vary greatly and are a function of the crop variety, pest combinations in the environment, climate, the system of harvesting, storage, handling, marketing, and even the social and cultural environment. Pests are among the most criticals of these factors. Because of the disastrous potential consequences of such pests, quarantine regulations prohibit the entrance of plants or products which might hide the unwanted pest from countries where it is known to exist. Quarantine treatments are can be chemical, physical or ionizing radiation treatment. Numerous investigations on the use of ionizing radiation for the disinfestation of fresh plant materials indicate that rather low dosages will control fruit-fly problems, thus making it well suited for quarantine treatment. The effectiveness of the irradiation as a broad spectrum quarantine treatment of fresh fruits and vegetables was recognized by the several plant protection organizations around the world. Currently, some 40 countries have approved one or more irradiated food items or groups of food

  12. Retention and failure morphology of prefabricated posts

    DEFF Research Database (Denmark)

    Sahafi, Alireza; Peutzfeldt, Anne; Asmussen, Erik

    2004-01-01

    PURPOSE: This study evaluated the effect of cement, post material, surface treatment, and shape (1) on the retention of posts luted in the root canals of extracted human teeth and (2) on the failure morphology. MATERIALS AND METHODS: Posts of titanium alloy (ParaPost XH), glass fiber (Para...... at 37 degrees C for 7 days, retention was determined by extraction of the posts. Failure morphology of extracted posts was analyzed and quantified stereomicroscopically. RESULTS: Type of luting cement, post material, and shape of post influenced the retention and failure morphology of the posts. Because...

  13. A strategic approach to employee retention.

    Science.gov (United States)

    Gering, John; Conner, John

    2002-11-01

    A sound retention strategy should incorporate a business plan, a value proposition, progress measures, and management influences. The business plan will indicate whether a healthcare organization will achieve a return on investment for its effort. A value proposition will showcase an organization's strengths and differentiate it from its competitors. Measuring progress toward meeting retention goals at regular intervals will help keep an organization on track. The best managers require accountability, rewarding employees for their successes and taking corrective action as necessary. Retention rate targets must be at a level that will achieve a competitive advantage in the served market.

  14. Urinary retention associated with herpes zoster infection.

    Science.gov (United States)

    Cohen, L M; Fowler, J F; Owen, L G; Callen, J P

    1993-01-01

    Herpes zoster infection particularly involving the sacral dermatomes has been associated with bladder and bowel dysfunction, most commonly urinary retention. We report two patients who developed acute urinary retention, one of whom also had constipation, within days of herpes zoster skin lesions of the S2-S4 dermatomes. Herpes zoster is a reversible cause of neurogenic bladder and bowel dysfunction and should be considered in a patient that presents with acute urinary retention and/or constipation. Sensory abnormalities and flaccid detrusor paralysis are most likely involved in the pathogenesis.

  15. Accounting for Forest Harvest and Wildfire in a Spatially-distributed Carbon Cycle Process Model

    Science.gov (United States)

    Turner, D. P.; Ritts, W.; Kennedy, R. E.; Yang, Z.; Law, B. E.

    2009-12-01

    Forests are subject to natural disturbances in the form of wildfire, as well as management-related disturbances in the form of timber harvest. These disturbance events have strong impacts on local and regional carbon budgets, but quantifying the associated carbon fluxes remains challenging. The ORCA Project aims to quantify regional net ecosystem production (NEP) and net biome production (NBP) in Oregon, California, and Washington, and we have adopted an integrated approach based on Landsat imagery and ecosystem modeling. To account for stand-level carbon fluxes, the Biome-BGC model has been adapted to simulate multiple severities of fire and harvest. New variables include snags, direct fire emissions, and harvest removals. New parameters include fire-intensity-specific combustion factors for each carbon pool (based on field measurements) and proportional removal rates for harvest events. To quantify regional fluxes, the model is applied in a spatially-distributed mode over the domain of interest, with disturbance history derived from a time series of Landsat images. In stand-level simulations, the post disturbance transition from negative (source) to positive (sink) NEP is delayed approximately a decade in the case of high severity fire compared to harvest. Simulated direct pyrogenic emissions range from 11 to 25 % of total non-soil ecosystem carbon. In spatial mode application over Oregon and California, the sum of annual pyrogenic emissions and harvest removals was generally less that half of total NEP, resulting in significant carbon sequestration on the land base. Spatially and temporally explicit simulation of disturbance-related carbon fluxes will contribute to our ability to evaluate effects of management on regional carbon flux, and in our ability to assess potential biospheric feedbacks to climate change mediated by changing disturbance regimes.

  16. Rainwater harvesting and management in rainfed agricultural systems in sub-Saharan Africa - A review

    Science.gov (United States)

    Biazin, Birhanu; Sterk, Geert; Temesgen, Melesse; Abdulkedir, Abdu; Stroosnijder, Leo

    Agricultural water scarcity in the predominantly rainfed agricultural system of sub-Saharan Africa (SSA) is more related to the variability of rainfall and excessive non-productive losses, than the total annual precipitation in the growing season. Less than 15% of the terrestrial precipitation takes the form of productive ‘green’ transpiration. Hence, rainwater harvesting and management (RWHM) technologies hold a significant potential for improving rainwater-use efficiency and sustaining rainfed agriculture in the region. This paper outlines the various RWHM techniques being practiced in SSA, and reviews recent research results on the performance of selected practices. So far, micro-catchment and in situ rainwater harvesting techniques are more common than rainwater irrigation techniques from macro-catchment systems. Depending on rainfall patterns and local soil characteristics, appropriate application of in situ and micro-catchment techniques could improve the soil water content of the rooting zone by up to 30%. Up to sixfold crop yields have been obtained through combinations of rainwater harvesting and fertiliser use, as compared to traditional practices. Supplemental irrigation of rainfed agriculture through rainwater harvesting not only reduces the risk of total crop failure due to dry spells, but also substantially improves water and crop productivity. Depending on the type of crop and the seasonal rainfall pattern, the application of RWHM techniques makes net profits more possible, compared to the meagre profit or net loss of existing systems. Implementation of rainwater harvesting may allow cereal-based smallholder farmers to shift to diversified crops, hence improving household food security, dietary status, and economic return. The much needed green revolution and adaptations to climate change in SSA should blend rainwater harvesting ideals with agronomic principles. More efforts are needed to improve the indigenous practices, and to disseminate best

  17. The Interfamilial Principle and the Harvest Festival.

    Science.gov (United States)

    Cherkassky, Lisa

    2016-03-01

    It is widely accepted that younger children can act as saviour siblings by donating cord blood or bone marrow to their gravely-ill brothers or sisters. However, it is under dispute whether these procedures are in the best interests of the child. This article suggests that parents may be relying on a thinly-veiled interfamilial approach, where the wider benefit to the whole family is used to justify the procedure to the Human Tissue Authority in the United Kingdom. This article suggests that the merging of familial interests to validate a non-therapeutic bone marrow harvest on a child forces altruism in a patient too young to understand, rendering the harvests unlawful under current law.

  18. Still special? Harvesting procedures for industrial hemp

    Directory of Open Access Journals (Sweden)

    Hans-Jörg Gusovius

    2016-01-01

    Full Text Available A multitude of different harvesting procedures is available after the re-approval of hemp growing in Germany about 20 years ago. Established, but as well recent machine developments enable the supply of raw materials for further processing or as food and feed materials. The necessary specialization level results in high but, compared to other established crops, not exceeding procedural costs. In this study, harvesting procedures and technologies are analyzed that are currently used under Northern European cultivation conditions. However, technological enhancements are still needed in order to improve the competitiveness of fibre hemp in the crop rotation as well as of hemp-based semi-finished and finished products.

  19. Risk Analysis Approach to Rainwater Harvesting Systems

    Directory of Open Access Journals (Sweden)

    Nadia Ursino

    2016-08-01

    Full Text Available Urban rainwater reuse preserves water resources and promotes sustainable development in rapidly growing urban areas. The efficiency of a large number of urban water reuse systems, operating under different climate and demand conditions, is evaluated here on the base of a new risk analysis approach. Results obtained by probability analysis (PA indicate that maximum efficiency in low demanding scenarios is above 0.5 and a threshold, distinguishing low from high demanding scenarios, indicates that in low demanding scenarios no significant improvement in performance may be attained by increasing the storage capacity of rainwater harvesting tanks. Threshold behaviour is displayed when tank storage capacity is designed to match both the average collected volume and the average reuse volume. The low demand limit cannot be achieved under climate and operating conditions characterized by a disproportion between harvesting and demand volume.

  20. Energy harvesting in high voltage measuring techniques

    International Nuclear Information System (INIS)

    Żyłka, Pawel; Doliński, Marcin

    2016-01-01

    The paper discusses selected problems related to application of energy harvesting (that is, generating electricity from surplus energy present in the environment) to supply autonomous ultra-low-power measurement systems applicable in high voltage engineering. As a practical example of such implementation a laboratory model of a remote temperature sensor is presented, which is self-powered by heat generated in a current-carrying busbar in HV- switchgear. Presented system exploits a thermoelectric harvester based on a passively cooled Peltier module supplying micro-power low-voltage dc-dc converter driving energy-efficient temperature sensor, microcontroller and a fibre-optic transmitter. Performance of the model in laboratory simulated conditions are presented and discussed. (paper)

  1. Harvesting space for a greener earth

    CERN Document Server

    Matloff, Greg; Johnson, Les

    2014-01-01

    What was our planet like in years past? How has our civilization affected Earth and its ecology? Harvesting Space for a Greener Planet, the Second Edition of Paradise Regained: The Regreening of the Earth, begins by discussing these questions, and then generates a scenario for the restoration of Earth. It introduces new and innovative ideas on how we could use the Solar System and its resources for terrestrial benefit. The environmental challenges that face us today cannot be resolved by conservation and current technologies alone. Harvesting Space highlights the risk of humankind’s future extinction from environmental degradation. Population growth, global climate change, and maintaining sustainability of habitats for wildlife are all considered, among other issues. Rather than losing heart, we need to realize that the solutions to these problems lie in being good stewards of the planet and in the development of space. Not only will the solutions offered here avert a crisis, they will also provide the basi...

  2. Stay or Leave? Factors Influencing the Retention of Teachers of Emotionally Disturbed in Southwestern Virginia

    OpenAIRE

    Walker, Anthony M.

    2010-01-01

    Walker Abstract The purpose of this study was to examine if certified special education teachers who instruct emotionally disabled students experience the same barriers to retention when compared to other special educators. Also, this study answered the hypothesis whether significant relationships exists between the variables of staff development, stress and burnout, compensation, student discipline, role conflict, workload, and administrative support and teacher reten...

  3. A Retention Assessment Process: Utilizing Total Quality Management Principles and Focus Groups

    Science.gov (United States)

    Codjoe, Henry M.; Helms, Marilyn M.

    2005-01-01

    Retaining students is a critical topic in higher education. Methodologies abound to gather attrition data as well as key variables important to retention. Using the theories of total quality management and focus groups, this case study gathers and reports data from current college students. Key results, suggestions for replication, and areas for…

  4. Prediction of the saturated hydraulic conductivity from Brooks and Corey’s water retention parameters

    NARCIS (Netherlands)

    Nasta, P.; Vrugt, J.A.; Romano, N.

    2013-01-01

    Prediction of flow through variably saturated porous media requires accurate knowledge of the soil hydraulic properties, namely the water retention function (WRF) and the hydraulic conductivity function (HCF). Unfortunately, direct measurement of the HCF is time consuming and expensive. In this

  5. Why Do They Stay? Elementary Teachers' Perceptions of Job Satisfaction and Retention

    Science.gov (United States)

    Perrachione, Beverly A.; Rosser, Vicki J.; Petersen, George J.

    2008-01-01

    The purpose of this study was to identify intrinsic and extrinsic variables that influence teacher job satisfaction and retention. A survey was sent to 300 randomly selected Missouri public elementary school teachers in grades K-5 having 5 or more years of teaching experience. The results from 201 respondents suggest that three intrinsic…

  6. Effects of Computer-Assisted Jigsaw II Cooperative Learning Strategy on Physics Achievement and Retention

    Science.gov (United States)

    Gambari, Isiaka Amosa; Yusuf, Mudasiru Olalere

    2016-01-01

    This study investigated the effects of computer-assisted Jigsaw II cooperative strategy on physics achievement and retention. The study also determined how moderating variables of achievement levels as it affects students' performance in physics when Jigsaw II cooperative learning is used as an instructional strategy. Purposive sampling technique…

  7. Exploring Student Characteristics of Retention That Lead to Graduation in Higher Education Using Data Mining Models

    Science.gov (United States)

    Raju, Dheeraj; Schumacker, Randall

    2015-01-01

    The study used earliest available student data from a flagship university in the southeast United States to build data mining models like logistic regression with different variable selection methods, decision trees, and neural networks to explore important student characteristics associated with retention leading to graduation. The decision tree…

  8. Effects of phytase supplementation on phosphorus retention in broilers and layers: A meta-analysis

    NARCIS (Netherlands)

    Bougouin, A.; Appuhamy, J.A.D.R.N.; Kebreab, E.; Dijkstra, J.; Kwakkel, R.P.; France, J.

    2014-01-01

    Phytase, a widely used feed additive in poultry diets, increases P availability and subsequently reduces inorganic-P supplementation and P-excretion. Phytase supplementation effect on P-retention in poultry has been investigated, but the effect sizes were highly variable. The present study’s

  9. Colour in Learning: Its Effect on the Retention Rate of Graduate Students

    Science.gov (United States)

    Olurinola, Oluwakemi; Tayo, Omoniyi

    2015-01-01

    Cognitive psychologists have discovered different design principles to enhance memory performance. It has been said that retrieving process depends on many variables and one of them is colour. This paper provides an overview of research on colour and learning. It includes the effect of colour on attention, retention and memory performance, and…

  10. Monsoon Harvests: Assessing the Impact of Rainwater Harvesting Ponds on Subsistence-Level Agriculture in the Gundar Basin, Tamil Nadu, India

    Science.gov (United States)

    Steiff, M.; Van Meter, K. J.; Basu, N. B.

    2013-12-01

    Lack of consistent water availability for irrigated agriculture is recognized as one of the primary constraints to meeting the UN Millennium Development Goals to alleviate hunger, and in semi-arid landscapes such as those of southern India, which are characterized by high intra-annual variability in rainfall, provision of capabilities for seasonal storage is recognized to be one of the key strategies towards alleviating water scarcity problems and ensuring food security. Although the issue of increased storage can be addressed by centralized infrastructure projects such as large-scale irrigation systems and dams, an alternative is the "soft path" approach, in which existing large-scale projects are complemented by small-scale, decentralized solutions. Such a decentralized approach has been utilized in southern India for thousands of years in the form of village rainwater harvesting tanks or ponds, providing a local and inherently sustainable approach to providing sufficient water for rice cultivation. Over the last century, however, large-scale canal projects and groundwater pumping have replaced rainwater harvesting as the primary source of irrigation water. But with groundwater withdrawals now exceeding recharge in many areas and water tables continuing to drop, many NGOs and government agencies are advocating for a revival of the older rainwater harvesting systems. Questions remain, however, regarding the limits to which rainwater harvesting can provide a solution to decades of water overexploitation. In the present work, we have utilized secondary data sources to analyze the linkages between the tank irrigation systems and the village communities that depend on them within the Gundar Basin of southern Tamil Nadu. Combining socioeconomic data with information regarding climate, land use, groundwater depletion, and tank density, we have developed indicators of sustainability for these systems. Using these indicators, we have attempted to unravel the close

  11. Cognitive Variability

    Science.gov (United States)

    Siegler, Robert S.

    2007-01-01

    Children's thinking is highly variable at every level of analysis, from neural and associative levels to the level of strategies, theories, and other aspects of high-level cognition. This variability exists within people as well as between them; individual children often rely on different strategies or representations on closely related problems…

  12. Building Store Satisfaction Centred on Customer Retention in Clothing Retailing: Store Design and Ease of Shopping

    Directory of Open Access Journals (Sweden)

    Gulden Turhan

    2016-01-01

    Full Text Available The study’s research model suggests that store design and ease of shopping are associated with customer retention through a mediated pathway in which store design and ease of shopping influence perceived store satisfaction, which in turn, influences customer retention. This survey was administered to two separate clothing stores offered to either females or males (in total, 533 participants. Using structural equation modelling methodology, data was analysed to explain the interrelations among the variables in the model. The results of an empirical study of a sample of store shoppers revealed that store design and ease of shopping influence customer retention in an indirect way through customer perception of satisfaction with the store. In building store satisfaction that is centred on customer retention, store design and shopping ease differ in their relative influences. This difference is high for females, but for men as low as to be considered negligible in males. As a result, improving customers’ perceptions of store design and ease of shopping is a way to ensure store satisfaction support customer retention. The results of the study provide a new insight into the relationships by suggesting indirect effects of shopping ease and store design on consumer retention by their impacts on store satisfaction, rather than direct effects.

  13. Building Store Satisfaction Centred on Customer Retention in Clothing Retailing: Store Design and Ease of Shopping

    Directory of Open Access Journals (Sweden)

    Gulden Turhan

    2014-01-01

    Full Text Available The study’s research model suggests that store design and ease of shopping are associated with customer retention through a mediated pathway in which store design and ease of shopping influence perceived store satisfaction, which in turn, influences customer retention. This survey was administered to two separate clothing stores offered to either females or males (in total, 533 participants. Using structural equation modelling methodology, data was analysed to explain the interrelations among the variables in the model. The results of an empirical study of a sample of store shoppers revealed that store design and ease of shopping influence customer retention in an indirect way through customer perception of satisfaction with the store. In building store satisfaction that is centred on customer retention, store design and shopping ease differ in their relative influences. This difference is high for females, but for men as low as to be considered negligible in males. As a result, improving customers’ perceptions of store design and ease of shopping is a way to ensure store satisfaction support customer retention. The results of the study provide a new insight into the relationships by suggesting indirect effects of shopping ease and store design on consumer retention by their impacts on store satisfaction, rather than direct effects.

  14. Thermal Harvesting Potential of the Human Body

    Science.gov (United States)

    Thielen, Moritz; Kara, Gökhan; Unkovic, Ivana; Majoe, Dennis; Hierold, Christofer

    2018-02-01

    Thermoelectric energy harvesting of human body heat might supplement or even replace conventional energy storage in wearable devices for healthcare and the Internet of Humans. Although a number of thermal harvesters are presented in the literature, no conclusive data can be found on the amount of available thermal energy provided by different individuals and activities. We here present the results of an observational study with 56 test subjects of different ages (children, adults and elderly) and gender, performing predefined activities (sitting, walking) in varying environments (indoor, outdoor). Our study showed a statistical difference of thermal potential and skin properties between age groups, but not between genders. On average, stationary elderly test subjects produced ˜ 32% less heat flux compared to minors (mean: children = 13.9 mW/cm2, adults = 11.4 mW/cm2, elderly = 9.4 mW/cm2). This potentially correlates with an increase in thermal skin resistance with age (children = 494 cm2 K/W, adults = 549 cm2 K/W, elderly = 835 cm2 K/W). The mean harvested power varied from 12.2 μW/cm2 (elderly) to 26.2 μW/cm2 (children) for stationary, and from 20.2 μW/cm2 (elderly) to 69.5 μW/cm2 (children) for active subjects inside of a building. The findings of this study can be used to better anticipate the available energy for different usage scenarios of thermal harvesters and optimize wearable systems accordingly.

  15. Electromechanical Modeling of Piezoelectric Energy Harvesters

    OpenAIRE

    Erturk, Alper

    2009-01-01

    Vibration-based energy harvesting has been investigated by several researchers over the last decade. The ultimate goal in this research field is to power small electronic components (such as wireless sensors) by using the vibration energy available in their environment. Among the basic transduction mechanisms that can be used for vibration-to-electricity conversion, piezoelectric transduction has received the most attention in the literature. Piezoelectric materials are preferred in energy ha...

  16. Thermal Harvesting Potential of the Human Body

    Science.gov (United States)

    Thielen, Moritz; Kara, Gökhan; Unkovic, Ivana; Majoe, Dennis; Hierold, Christofer

    2018-06-01

    Thermoelectric energy harvesting of human body heat might supplement or even replace conventional energy storage in wearable devices for healthcare and the Internet of Humans. Although a number of thermal harvesters are presented in the literature, no conclusive data can be found on the amount of available thermal energy provided by different individuals and activities. We here present the results of an observational study with 56 test subjects of different ages (children, adults and elderly) and gender, performing predefined activities (sitting, walking) in varying environments (indoor, outdoor). Our study showed a statistical difference of thermal potential and skin properties between age groups, but not between genders. On average, stationary elderly test subjects produced ˜ 32% less heat flux compared to minors (mean: children = 13.9 mW/cm2, adults = 11.4 mW/cm2, elderly = 9.4 mW/cm2). This potentially correlates with an increase in thermal skin resistance with age (children = 494 cm2 K/W, adults = 549 cm2 K/W, elderly = 835 cm2 K/W). The mean harvested power varied from 12.2 μW/cm2 (elderly) to 26.2 μW/cm2 (children) for stationary, and from 20.2 μW/cm2 (elderly) to 69.5 μW/cm2 (children) for active subjects inside of a building. The findings of this study can be used to better anticipate the available energy for different usage scenarios of thermal harvesters and optimize wearable systems accordingly.

  17. Harvesting and Organizing Knowledge from the Web

    OpenAIRE

    Weikum, Gerhard

    2007-01-01

    Information organization and search on the {W}eb is gaining structure and context awareness and more semantic flavor, for example, in the forms of faceted search, vertical search, entity search, and {D}eep-{W}eb search. I envision another big leap forward by automatically harvesting and organizing knowledge from the {W}eb, represented in terms of explicit entities and relations as well as ontological concepts. This will be made possible by the confluence of three stron...

  18. Interception and retention of 238Pu deposition by orange trees

    International Nuclear Information System (INIS)

    Pinder, J.E. III; Adriano, D.C.; Ciravolo, T.G.; Doswell, A.C.; Yehling, D.M.

    1987-01-01

    Radioisotope thermoelectric generators (RTG) transform the heat produced during the alpha decay of 238 Pu into electrical energy for use by deep-space probes, such as the Voyager spacecraft, which have returned images and other data from Jupiter, Saturn and Uranus. Future missions involving RTGs may be launched aboard the space shuttle, and there is a remote possibility that an explosion of liquid-hydrogen and liquid-oxygen fuel could rupture the RTGs and disperse 238 Pu into the atmosphere over central Florida. Research was performed to determine the potential transport to man of atmospherically dispersed Pu via contaminated orange fruits. The results indicate that the major contamination of oranges would result from the interception and retention of 238 Pu deposition by fruits. The resulting surface contamination could enter human food chains through transfer to internal tissues during peeling or in the reconstituted juices and flavorings made from orange skins. The interception of 238 Pu deposition by fruits is especially important because the results indicate no measurable loss of Pu from fruit surfaces through time or with washing. Approximately 1% of the 238 Pu deposited onto an orange grove would be harvested in the year following deposition

  19. RF power harvesting: a review on designing methodologies and applications

    Science.gov (United States)

    Tran, Le-Giang; Cha, Hyouk-Kyu; Park, Woo-Tae

    2017-12-01

    Wireless power transmission was conceptualized nearly a century ago. Certain achievements made to date have made power harvesting a reality, capable of providing alternative sources of energy. This review provides a summ ary of radio frequency (RF) power harvesting technologies in order to serve as a guide for the design of RF energy harvesting units. Since energy harvesting circuits are designed to operate with relatively small voltages and currents, they rely on state-of-the-art electrical technology for obtaining high efficiency. Thus, comprehensive analysis and discussions of various designs and their tradeoffs are included. Finally, recent applications of RF power harvesting are outlined.

  20. Remaining questions in the case for balanced harvesting

    DEFF Research Database (Denmark)

    Burgess, Matthew G; Diekert, Florian K; Jacobsen, Nis Sand

    2016-01-01

    are controversial, including its call for extensive harvesting of juveniles and forage fish. Balanced harvesting also calls for targeting species and size-classes that are not currently marketable, possibly at a significant economic cost. Some have argued that this cost is outweighed by the ecological benefits......Balanced harvestingharvesting all species and sizes in an ecosystem in proportion to their productivity – is a fisheries management strategy that has been suggested recently to increase yields, while reducing overall ecosystem impact. However, some aspects of balanced harvesting...

  1. Thermodynamic limits of energy harvesting from outgoing thermal radiation.

    Science.gov (United States)

    Buddhiraju, Siddharth; Santhanam, Parthiban; Fan, Shanhui

    2018-04-17

    We derive the thermodynamic limits of harvesting power from the outgoing thermal radiation from the ambient to the cold outer space. The derivations are based on a duality relation between thermal engines that harvest solar radiation and those that harvest outgoing thermal radiation. In particular, we derive the ultimate limit for harvesting outgoing thermal radiation, which is analogous to the Landsberg limit for solar energy harvesting, and show that the ultimate limit far exceeds what was previously thought to be possible. As an extension of our work, we also derive the ultimate limit of efficiency of thermophotovoltaic systems.

  2. Energy harvesting with Di-Electro Active Polymers

    DEFF Research Database (Denmark)

    Due, Jens; Munk-Nielsen, Stig; Nielsen, Rasmus Ørndrup

    2010-01-01

    This article presents a way of using Di-Electro Active Polymers (D-EAPs) for harvesting mechanical energy sources. The article describes the basics of energy harvesting with D-EAPs, and an electrical model of a D-EAP is suggested. This leads to a converter design which is able to extract...... the electrical energy harvested by the D-EAP. This converter is simulated and realized. Through experimental results both the model of the DEAP and the converter are verified. It is found that it is possible to harvest energy with a D-EAP and build a converter that can extract the harvested energy....

  3. Rainwater in Egypt: quantity, distribution and harvesting

    Directory of Open Access Journals (Sweden)

    H.I. ABDEL-SHAFY

    2010-11-01

    Full Text Available Egypt has limited water resources, and it will be under water stress within the year 2030. Therefore, Egypt should consider the natural and non-conventional water resources to overcome such problem. Rain harvesting is one solution; but not all; particularly on the north coast by the Mediterranean Sea and the Red sea. In this paper, the rainwater issue is reviewed and discussed in terms of the quantities and distribution at different selected areas in Egypt. The amount of rain falls at different location in Egypt was collected for a period of 16 months. The data indicated that rainfall in Egypt is very scarce, with an annual average of 12 mm and ranges from 0 mm/year in the desert to 200 mm/year in the north coastal region. The maximum total amount of rain does not exceed 1.8 billion m3per year. However, the average annual amount of rainfall water that is effectively utilized for agriculture purposes is estimated to be 1 billion m3. Harvesting pilot plant was constructed and implemented in Alexandria directly on the Mediterranean Sea. The harvested rain was used for irrigation and treated for drinking. It was, therefore, recommended to develop sustainable catchments at appropriate locations in the rain-fed areas at the north coast as well as cost effective grafting of the indigenous technologies with the innovative techniques.

  4. Mechanization in firewood harvesting in southern Italy

    Directory of Open Access Journals (Sweden)

    2005-01-01

    Full Text Available The aim of this research was to survey current mechanization level of coppice harvesting in Southern Italy. The cooperation of the General Direction of the National Forest Service (NFS has been a basic tool of survey. A questionnaire compiled on purpose was sent to each Forest Station (hereinafter referred to as CS in the following regions: Basilicata, Campania and Calabria. A high percentage (80% of the CSs did fulfill the questionnaire. The answers highlight that: i the main assortment currently produced is firewood; ii the level of harvesting mechanization is rather low, equipment being quite obsolete: indeed, the most widely used machineries are farm tractors partly adapted to forest harvesting and equipped with cages or back winch; iii the use of animals for hauling (mules and oxen, the latter in Calabria is still quite frequent, while forest tractors, polyethylene chutes and cable cranes are almost absent; iv the use of individual protection (DPI and machinery protection devices (DPM is on average quite low.

  5. Canadian peat harvesting and the environment

    International Nuclear Information System (INIS)

    Keys, D.

    1992-01-01

    In 1990, ca 749,000 tonnes of peat were sold by Canadian producers, a small volume in comparison to the estimated 50 million tonnes or more that accumulate naturally each year in Canada. Most of the harvested peat was used for horticultural purposes. The relationship between peatlands and the peat industry is examined, and issues related to the environment and sustainable resource use are discussed. Case studies are used to examine several specific situations where peatland development proposals have undergone environmental assessments. The present status of peatland conservation in Canada is reviewed. To date, developed peatlands are primarily situated in the boreal wetland regions and consist mainly of the bog wetland class. Environmental issues related to peatland development include the need for conservation of flora, fauna, and other ecological values or functions. The potential for release of carbon gases due to Canadian peat harvesting is considered to be insignificant in relation to other uses of carbon sources such as the combustion of fossil fuel, and is unlikely to influence global warming at the present or projected levels of peatland development in Canada. The influence and mitigation of the effects of drainage of peatlands for peat production on water quality and flow regime are being addressed on a site-specific basis through existing regulatory procedures and research. Reclamation and restoration options are being incorporated during design and operational development of new peat harvesting areas. 39 refs., 15 figs., 3 tabs

  6. Have we to harvest the contaminated wheats?

    International Nuclear Information System (INIS)

    Tannenberg, P. de

    1997-01-01

    The institute of nuclear protection and safety (IPSN) has just developed a calculation method allowing to evaluate the radioactive contamination of harvesting. This tool would allow, in case of nuclear accident, to determine if the contaminated lands under cultivation are eatable or not. Two radionuclides have been chosen: cesium 137 and strontium 90. The experiments are conclusive: the experimental releases of cesium and strontium were comparable to these ones of the Chernobyl forbidden zone (between 10 and 40 millions of becquerels/m 2 ): the foliar contamination is proportional to the plants development. Wheats ready to be harvested capture more than 80% of the radioactivity that contaminates them. Leaves of young plants keep only 20 to 40 %. Second result: cesium is more easily washable than strontium. Third results: more late is the contamination more the plant will be irradiated; then,the wheats contaminated when they are just out of ground are nine times less contaminated than cereals contaminated just before the harvest. (N.C.)

  7. Centralised urban stormwater harvesting for potable reuse.

    Science.gov (United States)

    McArdle, P; Gleeson, J; Hammond, T; Heslop, E; Holden, R; Kuczera, G

    2011-01-01

    Urban impervious areas provide a guaranteed source of runoff, especially in cities with high rainfall - this represents a source of water with low sensitivity to unfavourable climate change. Whilst the potential to reuse stormwater has long been recognised, its quality has largely limited usage to non-potable applications requiring the use of a third-pipe network, a prohibitively expensive option in established urban areas. Given recent advances in membrane filtration, this study investigates the potential of harvesting and treating stormwater to a potable standard to enable use of the potable distribution network. A case study based on the Throsby Creek catchment in Newcastle explores the issue. The high seasonally uniform rainfall provides insight into the maximum potential of such an option. Multicriterion optimisation was used to identify Pareto optimal solutions for harvesting, storing and treating stormwater. It is shown that harvesting and treating stormwater from a 13 km² catchment can produce yields ranging from 8.5 to 14.2 ML/day at costs ranging from AU$2.60/kL to AU$2.89/kL, which may become viable as the cost of traditional supply continues to grow. However, there are significant social impacts to deal with including alienation of public land for storage and community acceptance of treated stormwater.

  8. Optimum harvest maturity for Leymus chinensis seed

    Directory of Open Access Journals (Sweden)

    Jixiang Lin

    2016-06-01

    Full Text Available Timely harvest is critical to achieve maximum seed viability and vigour in agricultural production. However, little information exists concerning how to reap the best quality seeds of Leymus chinensis, which is the dominant and most promising grass species in the Songnen Grassland of Northern China. The objective of this study was to investigate and evaluate possible quality indices of the seeds at different days after peak anthesis. Seed quality at different development stages was assessed by the colours of the seed and lemmas, seed weight, moisture content, electrical conductivity of seed leachate and germination indices. Two consecutive years of experimental results showed that the maximum seed quality was recorded at 39 days after peak anthesis. At this date, the colours of the seed and lemmas reached heavy brown and yellow, respectively. The seed weight was highest and the moisture content and the electrical conductivity of seed leachate were lowest. In addition, the seed also reached its maximum germination percentage and energy at this stage, determined using a standard germination test (SGT and accelerated ageing test (AAT. Thus, Leymus chinensis can be harvested at 39 days after peak anthesis based on the changes in parameters. Colour identification can be used as an additional indicator to provide a more rapid and reliable measure of optimum seed maturity; approximately 10 days after the colour of the lemmas reached yellow and the colour of the seed reached heavy brown, the seed of this species was suitable for harvest.

  9. Web harvesting for nuclear knowledge preservation

    International Nuclear Information System (INIS)

    2008-01-01

    The IAEA has taken on the obligation to organize the continued availability of literature in the field of nuclear science and technology for peaceful applications. In the International Nuclear Information System (INIS), millions of scientific citations and the full texts of hundreds of thousands of pieces of non-conventional literature (NCL) have been collected worldwide and have been assembled into the INIS database of citations and the associated collection of NCL full texts. The next step in the IAEA's endeavour to secure the continued access to scientific and technical literature in the nuclear field which is now available on the Internet to its staff and to Member States. The IAEA is currently conducting pilot projects under the heading NuArch that could eventually become the seed of a comprehensive archive of electronic documents in the nuclear field. A pilot project was started in the IAEA for the period 2004-2005 and continues for the period 2006-2007. This publication provides information and examples based upon experience in a variety of Member States. It provides general information that present technical aspects of web harvesting in the context of knowledge preservation in the nuclear field, contemporary activities in the domain of web harvesting, document archiving and Internet access technology in order to obtain a contemporary technology overview. Several aspects of possible web harvesting methodologies are presented in some detail in this document which can also serve as a basis to establish future co-operation

  10. Winter Dew Harvest in Mexico City

    Directory of Open Access Journals (Sweden)

    Arias-Torres Jorge Ernesto

    2015-12-01

    Full Text Available This study presents experimental and theoretical results of winter dew harvest in México City in terms of condensation rate. A simplified theoretical model based on a steady-state energy balance on a radiator-condenser was fitted, as a function of the ambient temperature, the relative humidity and the wind velocity. A glass sheet and aluminum sheet white-painted were used as samples over the outdoor experiments. A good correlation was obtained between the theoretical and experimental data. The experimental results show that there was condensation in 68% of the winter nights on both condensers. The total winter condensed mass was 2977 g/m2 and 2888 g/m2 on the glass sheet and aluminum sheet white-painted, respectively. Thus, the condensed mass on the glass was only 3% higher than that on the painted surface. The maximum nightly dew harvests occurred during December, which linearly reduced from 50 g/m2 night to 22 g/m2 night as the winter months went by. The condensation occurred from 1:00 a.m. to 9:00 a.m., with maximum condensation rates between 6:00 a.m. and 7:00 a.m. The dew harvest can provide a partial alternative to the winter water shortage in certain locations with similar climates to the winter in Mexico City, as long as pollution is not significant.

  11. Review of Energy Harvesters Utilizing Bridge Vibrations

    Directory of Open Access Journals (Sweden)

    Farid Ullah Khan

    2016-01-01

    Full Text Available For health monitoring of bridges, wireless acceleration sensor nodes (WASNs are normally used. In bridge environment, several forms of energy are available for operating WASNs that include wind, solar, acoustic, and vibration energy. However, only bridge vibration has the tendency to be utilized for embedded WASNs application in bridge structures. This paper reports on the recent advancements in the area of vibration energy harvesters (VEHs utilizing bridge oscillations. The bridge vibration is narrowband (1 to 40 Hz with low acceleration levels (0.01 to 3.8 g. For utilization of bridge vibration, electromagnetic based vibration energy harvesters (EM-VEHs and piezoelectric based vibration energy harvesters (PE-VEHs have been developed. The power generation of the reported EM-VEHs is in the range from 0.7 to 1450000 μW. However, the power production by the developed PE-VEHs ranges from 0.6 to 7700 μW. The overall size of most of the bridge VEHs is quite comparable and is in mesoscale. The resonant frequencies of EM-VEHs are on the lower side (0.13 to 27 Hz in comparison to PE-VEHs (1 to 120 Hz. The power densities reported for these bridge VEHs range from 0.01 to 9539.5 μW/cm3 and are quite enough to operate most of the commercial WASNs.

  12. Performance Limits of Communication with Energy Harvesting

    KAUST Repository

    Znaidi, Mohamed Ridha

    2016-04-01

    In energy harvesting communications, the transmitters have to adapt transmission to the availability of energy harvested during communication. The performance of the transmission depends on the channel conditions which vary randomly due to mobility and environmental changes. During this work, we consider the problem of power allocation taking into account the energy arrivals over time and the quality of channel state information (CSI) available at the transmitter, in order to maximize the throughput. Differently from previous work, the CSI at the transmitter is not perfect and may include estimation errors. We solve this problem with respect to the energy harvesting constraints. Assuming a perfect knowledge of the CSI at the receiver, we determine the optimal power policy for different models of the energy arrival process (offline and online model). Indeed, we obtain the power allocation scheme when the transmitter has either perfect CSI or no CSI. We also investigate of utmost interest the case of fading channels with imperfect CSI. Moreover, a study of the asymptotic behavior of the communication system is proposed. Specifically, we analyze of the average throughput in a system where the average recharge rate goes asymptotically to zero and when it is very high.

  13. THE BEHAVIORAL PROFILE OF HARVESTER OPERATORS

    Directory of Open Access Journals (Sweden)

    Millana Burger Pagnussat

    Full Text Available ABSTRACT This study aims to characterize the behavioral profile of harvester operators, with the goal of assisting forest managers in selecting and training new teams of employees. A forest company located in central-western Brazil was examined from a sample of 20 harvester operators that did not have experience carrying out the functions of their industry. A behavioral profile evaluation tool was used, consisting of a management system that creates a profile based on behavioral competencies; it was initially used to develop a profile of a high-performing harvester operator; or rather, a reference profile. Next, the behavioral profile of the operators were grouped into distinct classes and compared with the reference profile to identify traits that could positively or negatively affect an operators' performance. An optimal profile had the following qualities: attentive to details, meets deadlines and follows rules, technically-oriented, patient with repetitive tasks, the ability to avoid conflicts, and being an introvert. An improper profile included aspects such as aggressiveness, being argumentative, being persuasive, explosive, and tense at work. The behavioral profile evaluation tool can support the process of choosing forest machine operators; however, it is important to also consider skills and work experience.

  14. Retention practices in education human resources management ...

    African Journals Online (AJOL)

    Retention practices in education human resources management. ... education system in South Africa, particularly in public schools, faces serious problems. ... of quality management which aim at continual increase of the accountability in ...

  15. Illustrations in Text: A Retentional Role.

    Science.gov (United States)

    Duchastel, Philippe C.

    1981-01-01

    Describes the results of a study of the retentional role of illustrations in a text and their effect on enhancing long-term memory with 15-year-old secondary school students. Seven references are listed. (CHC)

  16. International perspectives on retention and persistence

    Directory of Open Access Journals (Sweden)

    Gary Burkholder

    2014-06-01

    Full Text Available Access to higher education globally is increasing dramatically; attainment of tertiary degrees is a high priority, as educational attainment is associated with increased personal incomes as well as growth of the middle class in developing countries. The purpose of this essay is to briefly examine retention and persistence issues from a global perspective, review some retention strategies that have been employed at schools outside the United States, and to identify several key factors that related to retention and persistence globally, including access, infrastructure, financial consideration, and readiness for tertiary education.  There exists an opportunity to utilize knowledge gained in the evolution of the higher education system in the United States to help address the problems associated with retention and persistence.   DOI: 10.18870/hlrc.v4i2.208

  17. Linkage between Psychological Contract and Employee Retention

    African Journals Online (AJOL)

    GRACE

    strengthened by clearly stating expectations during recruitment and ... Impact of psychological contract in a work environment vis-à-vis employee retention, ..... psychological contract that will incite a faithful, fruitful and fulfilled work team.

  18. Managing Chemotherapy Side Effects: Swelling (Fluid Retention)

    Science.gov (United States)

    N ational C ancer I nstitute Managing Chemotherapy Side Effects Swelling (Fluid retention) “My hands and feet were swollen and puffy. My nurse helped me understand why I had to stop eating salty ...

  19. Multimodel simulations of forest harvesting effects on long‐term productivity and CN cycling in aspen forests.

    Science.gov (United States)

    Wang, Fugui; Mladenoff, David J; Forrester, Jodi A; Blanco, Juan A; Schelle, Robert M; Peckham, Scott D; Keough, Cindy; Lucash, Melissa S; Gower, Stith T

    The effects of forest management on soil carbon (C) and nitrogen (N) dynamics vary by harvest type and species. We simulated long-term effects of bole-only harvesting of aspen (Populus tremuloides) on stand productivity and interaction of CN cycles with a multiple model approach. Five models, Biome-BGC, CENTURY, FORECAST, LANDIS-II with Century-based soil dynamics, and PnET-CN, were run for 350 yr with seven harvesting events on nutrient-poor, sandy soils representing northwestern Wisconsin, United States. Twenty CN state and flux variables were summarized from the models' outputs and statistically analyzed using ordination and variance analysis methods. The multiple models' averages suggest that bole-only harvest would not significantly affect long-term site productivity of aspen, though declines in soil organic matter and soil N were significant. Along with direct N removal by harvesting, extensive leaching after harvesting before canopy closure was another major cause of N depletion. These five models were notably different in output values of the 20 variables examined, although there were some similarities for certain variables. PnET-CN produced unique results for every variable, and CENTURY showed fewer outliers and similar temporal patterns to the mean of all models. In general, we demonstrated that when there are no site-specific data for fine-scale calibration and evaluation of a single model, the multiple model approach may be a more robust approach for long-term simulations. In addition, multimodeling may also improve the calibration and evaluation of an individual model.

  20. Compensation packages: a strategic tool for employees’ performance and retention

    Directory of Open Access Journals (Sweden)

    Omotayo Adewale OSIBANJO

    2014-02-01

    Full Text Available The rate at which employees in private universities in Nigeria jump from one university to the other is becoming more disturbing and this could be as a result of compensation packages of different universities to attract competent employees. The aim of this study was to examine the effect of compensation packages on employees’ job performance and retention in a selected private University in Ogun State, South-West Nigeria. A model was developed and tested using one hundred and eleven valid questionnaires which were completed by academics and non-academic staff of the university. The collected data were carefully analyzed using simple percentage supported by structural equation modelling to test the hypotheses and relationships that may exist among the variables under consideration. The results showed strong relationship between compensation packages and employees’ performance and retention. The summary of the findings indicates that there is strong correlation between the tested dependent and independent variables (salary, bonus, incentives, allowances, and fringe benefits. However, management and decision makers should endeavour to review compensation packages at various levels in order to earn employees’ satisfaction and prevention of high labour turnover among the members of staff.