WorldWideScience

Sample records for vanadium dioxide films

  1. Electron-beam deposition of vanadium dioxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Marvel, R.E.; Appavoo, K. [Vanderbilt University, Interdisciplinary Materials Science Program, Nashville, TN (United States); Choi, B.K. [Vanderbilt University, Department of Electrical Engineering and Computer Science, Nashville, TN (United States); Nag, J. [Vanderbilt University, Department of Physics and Astronomy, Nashville, TN (United States); Haglund, R.F. [Vanderbilt University, Interdisciplinary Materials Science Program, Nashville, TN (United States); Vanderbilt University, Institute for Nanoscale Science and Engineering, Nashville, TN (United States); Vanderbilt University, Department of Physics and Astronomy, Nashville, TN (United States)

    2013-06-15

    Developing a reliable and efficient fabrication method for phase-transition thin-film technology is critical for electronic and photonic applications. We demonstrate a novel method for fabricating polycrystalline, switchable vanadium dioxide thin films on glass and silicon substrates and show that the optical switching contrast is not strongly affected by post-processing annealing times. The method relies on electron-beam evaporation of a nominally stoichiometric powder, followed by fast annealing. As a result of the short annealing procedure we demonstrate that films deposited on silicon substrates appear to be smoother, in comparison to pulsed laser deposition and sputtering. However, optical performance of e-beam evaporated film on silicon is affected by annealing time, in contrast to glass. (orig.)

  2. Tc anisotropy and phase separation in strained Vanadium Dioxide films

    Science.gov (United States)

    Liu, Mengkun; Wagner, Martin; Abreu, Elsa; Kittiwatanakul, Salinporn; McLeod, Alexander; Goldflam, Michael; Fei, Zhe; Dai, Siyuan; Fogler, Michael; Lu, Jiwei; Wolf, Stuart; Averitt, Richard; Basov, D. N.

    2013-03-01

    We report Infrared near field study on strain induced transition temperature (Tc) anisotropy in vanadium dioxide (VO2) films via direct visualization of a spontaneous structural and electronic phase separation. The films are epitaxially grown on [110]R or [100]R TiO2 substrates and exhibit large uniaxial strain. By mapping the film topography with AFM and electronic percolation with Infrared scattering scanning near-field optical microscopy, a temperature dependent electron-lattice correlation can be clearly observed. Our work sheds a new light onto the nature of the Tc anomaly in metal-insulator transition and leads to the possibility of controlling the material's properties through strain induced phase separation.

  3. The influence of deposition temperature on vanadium dioxide thin films microstructure and physical properties

    Directory of Open Access Journals (Sweden)

    Velaphi Msomi

    2010-10-01

    Full Text Available Vanadium dioxide thin films were successfully prepared on soda lime glass substrates using the optimised conditions for r.f-inverted cylindrical magnetron sputtering. The optimised deposition parameters were fixed and then a systematic study of the effect of deposition temperature, ranging from 450 °C to 550 °C, on the microstructure of thermochromic thin films was carried out. The deposited films were found to be well crystallised, showing strong texture corresponding to the (011 plane, indicating the presence of vanadium dioxide.

  4. Phase-selective vanadium dioxide (VO{sub 2}) nanostructured thin films by pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Masina, B. N., E-mail: BMasina@csir.co.za, E-mail: slafane@cdta.dz [CSIR-National Laser Centre, PO BOX 395, Pretoria 0001 (South Africa); School of Physics, University of KwaZulu-Natal, Private Bag X54001, Durban 4000 (South Africa); Lafane, S., E-mail: BMasina@csir.co.za, E-mail: slafane@cdta.dz; Abdelli-Messaci, S.; Kerdja, T. [Division des Milieux Ionisés et Laser, Centre de Développement des Technologies Avancées, Cité du 20 Août 1956, BP 17, Baba Hassen (Algeria); Wu, L. [CSIR-National Laser Centre, PO BOX 395, Pretoria 0001 (South Africa); Akande, A. A.; Mwakikunga, B. [DST/CSIR National Centre for Nano-Structured Materials, PO BOX 395, Pretoria 0001 (South Africa); Forbes, A. [School of Physics, University of the Witwatersrand, Private Bag 3, Wits 2050, Johannesburg (South Africa)

    2015-10-28

    Thin films of monoclinic nanostructured vanadium dioxide are notoriously difficult to produce in a selective manner. To date, post-annealing, after pulsed laser deposition (PLD), has been used to revert the crystal phase or to remove impurities, and non-glass substrates have been employed, thus reducing the efficacy of the transparency switching. Here, we overcome these limitations in PLD by optimizing a laser-ablation and deposition process through optical imaging of the laser-induced plasma. We report high quality monoclinic rutile-type vanadium dioxide (VO{sub 2}) (M1) nanoparticles without post-annealing, and on a glass substrate. Our samples demonstrate a reversible metal-to-insulator transition at ∼43 °C, without any doping, paving the way to switchable transparency in optical materials at room temperature.

  5. Vanadium dioxide thin film with low phase transition temperature deposited on borosilicate glass substrate

    Energy Technology Data Exchange (ETDEWEB)

    Huang Zhangli; Chen Sihai, E-mail: cshai99@mail.hust.edu.cn; Wang Boqing; Huang Ying; Liu Nengfu; Xu Jin; Lai Jianjun

    2011-04-29

    A nanostructured vanadium dioxide (VO{sub 2}) thin film showing a low metal-insulator transition temperature of 30 {sup o}C has been fabricated through reactive ion beam sputtering followed by thermal annealing. The thin film was grown on borosilicate glass substrate at the temperature of 280 {sup o}C with a Si{sub 3}N{sub 4} buffer layer. Both scanning electron microscopy and atomic force microscopy images have been taken to investigate the configuration of VO{sub 2} thin film. The average height of the crystallite is 20 nm and the grain size ranges from 40 nm to 100 nm. The transmittance measured from low to high temperatures also reveals that the film possesses excellent switching property in infrared light at critical transition temperature, with switching efficiency of 52% at 2600 nm. This experiment paves the way of VO{sub 2} thin film's application in smart windows.

  6. Transparent optically vanadium dioxide thermochromic smart film fabricated via electrospinning technique

    Science.gov (United States)

    Lu, Yuan; Xiao, Xiudi; Cao, Ziyi; Zhan, Yongjun; Cheng, Haoliang; Xu, Gang

    2017-12-01

    The monoclinic phase vanadium dioxide VO2 (M) based transparent thermochromic smart films were firstly fabricated through heat treatment of opaque VO2-based composite nanofibrous mats, which were deposited on the glass substrate via electrospinning technique. Noteworthily, the anti-oxidation property of VO2 smart film was improved due to inner distribution of VO2 in the polymethylmethacrylate (PMMA) nanofibers, and the composite mats having water contact angle of 165° determined itself good superhydrophobic property. Besides, PMMA nanofibrous mats with different polymer concentrations demonstrated changeable morphology and fiber diameter. The VO2 nanoparticles having diameter of 30-50 nm gathered and exhibited ellipse-like or belt-like structure. Additionally, the solar modulation ability of PMMA-VO2 composite smart film was 6.88% according to UV-Vis-NIR spectra. The research offered a new notion for fabricating transparent VO2 thermochromic material.

  7. Effects of gamma irradiations on reactive pulsed laser deposited vanadium dioxide thin films

    Science.gov (United States)

    Madiba, I. G.; Émond, N.; Chaker, M.; Thema, F. T.; Tadadjeu, S. I.; Muller, U.; Zolliker, P.; Braun, A.; Kotsedi, L.; Maaza, M.

    2017-07-01

    Vanadium oxide films are considered suitable coatings for various applications such as thermal protective coating of small spacecrafts because of their thermochromic properties. While in outer space, such coating will be exposed to cosmic radiations which include γ-rays. To study the effect of these γ-rays on the coating properties, we have deposited vanadium dioxide (VO2) films on silicon substrates and subjected them to extensive γ-irradiations with typical doses encountered in space missions. The prevalent crystallographic phase after irradiation remains the monoclinic VO2 phase but the films preferential orientation shifts to lower angles due to the presence of disordered regions caused by radiations. Raman spectroscopy measurements also evidences that the VO2 structure is slightly affected by gamma irradiation. Indeed, increasing the gamma rays dose locally alters the crystalline and electronic structures of the films by modifying the V-V inter-dimer distance, which in turns favours the presence of the VO2 metallic phase. From the XPS measurements of V2p and O1s core level spectra, an oxidation of vanadium from V4+ towards V5+ is revealed. The data also reveal a hydroxylation upon irradiation which is corroborated by the vanishing of a low oxidation state peak near the Fermi energy in the valence band. Our observations suggest that gamma radiations induce the formation of Frenkel pairs. Moreover, THz transmission measurements show that the long range structure of VO2 remains intact after irradiation whilst the electrical measurements evidence that the coating resistivity decreases with gamma irradiation and that their transition temperature is slightly reduced for high gamma ray doses. Even though gamma rays are only one of the sources of radiations that are encountered in space environment, these results are very promising with regards to the potential of integration of such VO2 films as a protective coating for spacecrafts.

  8. Tuning the conductivity of vanadium dioxide films on silicon by swift heavy ion irradiation

    Directory of Open Access Journals (Sweden)

    H. Hofsäss

    2011-09-01

    Full Text Available We demonstrate the generation of a persistent conductivity increase in vanadium dioxide thin films grown on single crystal silicon by irradiation with 1 GeV 238U swift heavy ions at room temperature. VO2 undergoes a temperature driven metal-insulator-transition (MIT at 67 °C. After room temperature ion irradiation with high electronic energy loss of 50 keV/nm the conductivity of the films below the transition temperature is strongly increased proportional to the ion fluence of 5·109 U/cm2 and 1·1010 U/cm2. At high temperatures the conductivity decreases slightly. The ion irradiation slightly reduces the MIT temperature. This observed conductivity change is persistent and remains after heating the samples above the transition temperature and subsequent cooling. Low temperature measurements down to 15 K show no further MIT below room temperature. Although the conductivity increase after irradiation at such low fluences is due to single ion track effects, atomic force microscopy (AFM measurements do not show surface hillocks, which are characteristic for ion tracks in other materials. Conductive AFM gives no evidence for conducting ion tracks but rather suggests the existence of conducting regions around poorly conducting ion tracks, possible due to stress generation. Another explanation of the persistent conductivity change could be the ion-induced modification of a high resistivity interface layer formed during film growth between the vanadium dioxide film and the n-Silicon substrate. The swift heavy ions may generate conducting filaments through this layer, thus increasing the effective contact area. Swift heavy ion irradiation can thus be used to tune the conductivity of VO2 films on silicon substrates.

  9. Tuning the conductivity of vanadium dioxide films by swift heavy ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Ehrhardt, Paul; Hofsaess, Hans; Gehrke, Hans-Gregor [II. Physikalisches Institut, Fakultaet fuer Physik, Universitaet Goettingen, Friedrich-Hund-Platz 1, 37077 Goettingen (Germany); Krauser, Johann [Hochschule Harz, University of Applied Sciences, Friedrichstrasse 57-59, 38855 Wernigerode (Germany); Trautmann, Christina [Gesellschaft fuer Schwerionenforschung, Planckstrasse 1, 64291 Darmstadt (Germany); Ramanathan, Shriram [Harvard School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138 (United States)

    2012-07-01

    We demonstrate the generation of a persistent conductivity increase in vanadium dioxide thin films by irradiation with swift heavy ions at room temperature. VO{sub 2} undergoes a temperature driven metal-insulator-transition (MIT) at 67 C. After the ion irradiation the conductivity of the films we observe a strong increase in conductivity below the transition temperature proportional to the ion fluence. This change in conductivity is persistent and remains after several cycles of heating. Low temperature measurements down to 15 K show no further MIT below room temperature. Although the conductivity increase after irradiation at such low fluences is due to single ion track effects, atomic force microscopy (AFM) measurements do not show surface hillocks, which are characteristic for ion tracks in other materials. AFM measurements with conducting tip give no evidence for conducting ion tracks but indicate the existence of conducting regions around poorly conducting ion tracks, possible due to stress generation.

  10. Effects of gamma irradiations on reactive pulsed laser deposited vanadium dioxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Madiba, I.G., E-mail: madibagiven@gmail.com [UNESCO-UNISA Africa Chair in Nanosciences/Nanotechnology, College of Graduate Studies, University of South Africa (UNISA), Muckleneuk Ridge, P O Box 392, Pretoria (South Africa); Empa, Swiss Federal Laboratories Materials Science and Technology, CH-8600 Dübendorf (Switzerland); Émond, N.; Chaker, M. [Institut National de la Recherche Scientifique (INRS),1650 Blvd. Lionel-Boulet, Varennes, Québec J3X1S2 (Canada); Thema, F.T. [UNESCO-UNISA Africa Chair in Nanosciences/Nanotechnology, College of Graduate Studies, University of South Africa (UNISA), Muckleneuk Ridge, P O Box 392, Pretoria (South Africa); iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, PO Box 722, Somerset West, Western Cape Province (South Africa); Tadadjeu, S.I. [iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, PO Box 722, Somerset West, Western Cape Province (South Africa); Department of Electrical, Electronics and Computer Engineering, French South African Institute of Technology/Cape Peninsula University of Technology, Bellville campus, PO Box 1906, Bellville, 7530 (South Africa); Muller, U.; Zolliker, P. [Empa, Swiss Federal Laboratories Materials Science and Technology, CH-8600 Dübendorf (Switzerland); Braun, A. [ETH Zurich, Swiss Federal Institute of Technology, CH-8057, Zurich (Switzerland); Empa, Swiss Federal Laboratories Materials Science and Technology, CH-8600 Dübendorf (Switzerland); Kotsedi, L. [iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West 7129, PO Box 722, Somerset West, Western Cape Province (South Africa); and others

    2017-07-31

    Highlights: • Synthesis of VO{sub 2} thin films by Reactive pulsed laser deposition has been achieved. • Properties VO{sub 2} remain mainly unaffected when subjected to gamma ray doses similar to those encountered during space missions. • The long range crystal structure of VO{sub 2} remains intact upon irradiation on different doses up to 100 kGy. • XPS reveals a shift from V{sup 4+} to V{sup 5+} oxidation state upon irradiation, due to the frenkel pair formation on the surface. • Irradiated films show the characteristic SMT of VO{sub 2}, although the electrical and optical properties are slightly affected. - Abstract: Vanadium oxide films are considered suitable coatings for various applications such as thermal protective coating of small spacecrafts because of their thermochromic properties. While in outer space, such coating will be exposed to cosmic radiations which include γ-rays. To study the effect of these γ-rays on the coating properties, we have deposited vanadium dioxide (VO{sub 2}) films on silicon substrates and subjected them to extensive γ-irradiations with typical doses encountered in space missions. The prevalent crystallographic phase after irradiation remains the monoclinic VO{sub 2} phase but the films preferential orientation shifts to lower angles due to the presence of disordered regions caused by radiations. Raman spectroscopy measurements also evidences that the VO{sub 2} structure is slightly affected by gamma irradiation. Indeed, increasing the gamma rays dose locally alters the crystalline and electronic structures of the films by modifying the V–V inter-dimer distance, which in turns favours the presence of the VO{sub 2} metallic phase. From the XPS measurements of V2p and O1s core level spectra, an oxidation of vanadium from V{sup 4+} towards V{sup 5+} is revealed. The data also reveal a hydroxylation upon irradiation which is corroborated by the vanishing of a low oxidation state peak near the Fermi energy in the

  11. Current-modulated optical properties of vanadium dioxide thin films in the phase transition region

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Shuyan; Kats, Mikhail A.; Cui, Yanjie; Zhou, You; Yao, Yu; Ramanathan, Shriram; Capasso, Federico, E-mail: capasso@seas.harvard.edu [School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138 (United States)

    2014-11-24

    Vanadium dioxide (VO{sub 2}) is a correlated electron material which undergoes an insulator-metal transition proximal to room temperature. The large change of optical properties across this phase transition is promising for tunable optical and optoelectronic devices especially at infrared frequencies. We demonstrate the ability to locally tune the optical properties on the micron scale through a simple design consisting of two electrodes patterned on a VO{sub 2} thin film. By current injection between the electrodes, a localized conducting path (metallic phase) can be formed within the insulating background. The width of the conducting path can be controlled by varying the applied current. Fourier transform infrared imaging shows that this current-modulated reflectance changes significantly over a distance on the order of the wavelength in the mid-infrared spectral range.

  12. Vanadium oxide thin films deposited on silicon dioxide buffer layers by magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Chen Sihai [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China) and Wuhan National laboratory for Optoelectronics, Wuhan 430074 (China)]. E-mail: cshai99@yahoo.com; Ma Hong [Department of Electronics and Information Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Wang Shuangbao [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Shen Nan [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Xiao Jing [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhou Hao [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Zhao Xiaomei [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); Wuhan National laboratory for Optoelectronics, Wuhan 430074 (China); Li Yi [Department of Optoelectronic Engineering, Huazhong University of Science and Technology, Wuhan 430074 (China); State Key Laboratory for Imaging Recognization and Intelligence Control, Huazhong University of Science and Technology, Wuhan 430074 (China); Yi Xinjian [State Key Laboratory for Imaging Recognization and Intelligence Control, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2006-02-21

    Thin films made by vanadium oxide have been obtained by direct current magnetron sputtering method on SiO{sub 2} buffer layers. A detailed electrical and structural characterization has been performed on the deposited films by four-point probe method and scanning electron microscopy (SEM). At room temperature, the four-point probe measurement result presents the resistance of the film to be 25 kU/sheet. The temperature coefficient of resistance is - 2.0%/K. SEM image indicates that the vanadium oxide exhibits a submicrostructure with lamella size ranging from 60 nm to 300 nm. A 32 x 32-element test microbolometer was fabricated based on the deposited thin film. The infrared response testing showed that the response was 200 mV. The obtained results allow us to conclude that the vanadium oxide thin films on SiO{sub 2} buffer layers is suitable for uncooled focal plane arrays applications.

  13. Optical switching and photoluminescence in erbium-implanted vanadium dioxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Herianto, E-mail: mail@heriantolim.com; Stavrias, Nikolas; Johnson, Brett C.; McCallum, Jeffrey C. [School of Physics, University of Melbourne, Parkville, Victoria 3010 (Australia); Marvel, Robert E.; Haglund, Richard F. [Department of Physics and Astronomy, Vanderbilt University, Nashville, Tennessee 37240 (United States)

    2014-03-07

    Vanadium dioxide (VO{sub 2}) is under intensive consideration for optical switching due to its reversible phase transition, which features a drastic and rapid shift in infrared reflectivity. Classified as an insulator–to–metal transition, the phase transition in VO{sub 2} can be induced thermally, electrically, and optically. When induced optically, the transition can occur on sub-picosecond time scales. It is interesting to dope VO{sub 2} with erbium ions (Er{sup 3+}) and observe their combined properties. The first excited-state luminescence of Er{sup 3+} lies within the wavelength window of minimal transmission-loss in silicon and has been widely utilized for signal amplification and generation in silicon photonics. The incorporation of Er{sup 3+} into VO{sub 2} could therefore result in a novel photonic material capable of simultaneous optical switching and amplification. In this work, we investigate the optical switching and photoluminescence in Er-implanted VO{sub 2} thin films. Thermally driven optical switching is demonstrated in the Er-implanted VO{sub 2} by infrared reflectometry. Photoluminescence is observed in the thin films annealed at ∼800 °C or above. In addition, Raman spectroscopy and a statistical analysis of switching hysteresis are carried out to assess the effects of the ion implantation on the VO{sub 2} thin films. We conclude that Er-implanted VO{sub 2} can function as an optical switch and amplifier, but with reduced switching quality compared to pure VO{sub 2}.

  14. Fundamentals of vanadium dioxide thin films as possible components of intelligent windows

    Directory of Open Access Journals (Sweden)

    Wu, Z. P.

    1999-03-01

    Full Text Available In this paper, the research on the vanadium dioxide thin film, which can be used as intelligent windows, is reviewed, including the basic properties of V2, energy band structure, model of electronic energy and the origin of metal-to-insulator transition (MIT. Finally, the problems existing in the research and the possibility of application for VO2, as an intelligent thermochromic window are briefly discussed.

    En este artículo se revisan las investigaciones realizadas en películas delgadas de dióxido de vanadio que pueden ser usadas en componentes de ventanas inteligentes, incluyendo las propiedades básicas del VO2, tales como su estructura de bandas, modelo energético de tipo electrónico y el origen del fenómeno de la transición: metal-aislador (MIT en la literatura inglesa que constituye la base de las aplicaciones de estas películas. Finalmente, los problemas que hay en la investigación actual de este tipo de películas, así como sus posibles aplicaciones en ventanas inteligentes de tipo termocrómico, se discuten brevemente.

  15. Effect of ZnO buffer layer on phase transition properties of vanadium dioxide thin films

    Science.gov (United States)

    Zhu, Huiqun; Li, Lekang; Li, Chunbo

    2016-03-01

    VO2 thin films were prepared on ZnO buffer layers by DC magnetron sputtering at room temperature using vanadium target and post annealing at 400 °C. The ZnO buffer layers with different thickness deposited on glass substrates by magnetron sputtering have a high visible and near infrared optical transmittance. The electrical resistivity and the phase transition properties of the VO2/ZnO composite thin films in terms of temperature were investigated. The results showed that the resistivity variation of VO2 thin film with ZnO buffer layer deposited for 35 min was 16 KΩ-cm. The VO2/ZnO composite thin films exhibit a reversible semiconductor-metal phase transition at 48 °C.

  16. Metal-insulator transition properties of sputtered silicon-doped and un-doped vanadium dioxide films at terahertz range

    Science.gov (United States)

    Zhang, Huafu; Wu, Zhiming; Niu, Ruihua; Wu, Xuefei; he, Qiong; Jiang, Yadong

    2015-03-01

    Silicon-doped and un-doped vanadium dioxide (VO2) films were synthesized on high-purity single-crystal silicon substrates by means of reactive direct current magnetron sputtering followed by thermal annealing. The structure, morphology and metal-insulator transition properties of silicon-doped VO2 films at terahertz range were measured and compared to those of un-doped VO2 films. X-ray diffraction and scanning electron microscopy indicated that doping the films with silicon significantly affects the preferred crystallographic orientation and surface morphologies (grain size, pores and characteristics of grain boundaries). The temperature dependence of terahertz transmission shows that the transition temperature, hysteresis width and transition sharpness greatly depend on the silicon contents while the transition amplitude was relatively insensitive to the silicon contents. Interestingly, the VO2 film doped with a silicon content of 4.6 at.% shows excellent terahertz switching characteristics, namely a small hysteresis width of 4.5 °C, a giant transmission modulation ratio of about 82% and a relatively low transition temperature of 56.1 °C upon heating. This work experimentally indicates that silicon doping can effectively control not only the surface morphology but also the metal-insulator transition characteristics of VO2 films at terahertz range.

  17. Vanadium dioxide thin films prepared on silicon by low temperature MBE growth and ex-situ annealing

    Science.gov (United States)

    Homm, Pia; van Bilzen, Bart; Menghini, Mariela; Locquet, Jean-Pierre; Ivanova, Todora; Sanchez, Luis; Sanchis, Pablo

    Vanadium dioxide (VO2) is a material that shows an insulator to metal transition (IMT) near room temperature. This property can be exploited for applications in field effect devices, electro-optical switches and nonlinear circuit components. We have prepared VO2 thin films on silicon wafers by combining a low temperature MBE growth with an ex-situ annealing at high temperature. We investigated the structural, electrical and optical characteristics of films with thicknesses ranging from 10 to 100 nm. We have also studied the influence of the substrate cleaning. The films grown with our method are polycrystalline with a preferred orientation in the (011) direction of the monoclinic phase. For the films produced on silicon with a native oxide, an IMT at around 75 °C is observed. The magnitude of the resistance change across the IMT decreases with thickness while the refractive index at room temperature corresponds with values reported in the literature for thin films. The successful growth of VO2 films on silicon with good electrical and optical properties is an important step towards the integration of VO2 in novel devices. The authors acknowledge financial support from the FWO project G052010N10 and EU-FP7 SITOGA project. PH acknowledges support from Becas Chile - CONICYT.

  18. Tungsten-doped vanadium dioxide thin films on borosilicate glass for smart window application

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhangli, E-mail: zligthuang@foxmail.com [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan 430074 (China); Chen, Changhong, E-mail: ch_chen@hust.edu.cn [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Lv, Chaohong; Chen, Sihai [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2013-07-05

    Highlights: ► Tungsten-doped VO{sub 2} (W–VO{sub 2}) films with different annealing conditions were fabricated. ► W-VO{sub 2} films were found to exhibit a semiconductor-metal transition at 34 °C. ► The W atoms have been successfully doped into VO{sub 2} film and exist as W{sup 6+} in the films. ► W-VO{sub 2} films possess excellent infrared switching efficiency, i.e. 33%. -- Abstract: Tungsten-doped VO{sub 2} (W–VO{sub 2}) thin films with low metal–semiconductor transition temperature (T{sub t}) of 34 °C were grown on borosilicate glass substrates by reactive ion beam sputtering at room-temperature (RT) followed by a post annealing process. In order to investigate the thermal process effect, four samples S1–S4 were annealed at different temperatures of 490, 530, 570 and 610 °C, respectively. X-ray photoelectron spectroscope and Raman measurements demonstrate that the tungsten atoms have been successfully doped into VO{sub 2} films. Unlike VO{sub 2} thin films which should be annealed at critical temperature, well crystallized W–VO{sub 2} films can be annealed in a wide temperature range, i.e. 530–570 °C, as revealed by both electrical and optical property investigations. Besides, the infrared (IR) transmittance measured below/above T{sub t} illustrates that W–VO{sub 2} films possess excellent switching efficiency, i.e. 33% at 2500 nm for S3. Above all, the near RT phase transition, RT deposition, easy control of annealing process and high IR switching efficiency make the W–VO{sub 2} thin film a promising material for application of smart windows.

  19. Controlling phase separation in vanadium dioxide thin films via substrate engineering

    Science.gov (United States)

    Gilbert Corder, Stephanie N.; Jiang, Jianjuan; Chen, Xinzhong; Kittiwatanakul, Salinporn; Tung, I.-Cheng; Zhu, Yi; Zhang, Jiawei; Bechtel, Hans A.; Martin, Michael C.; Carr, G. Lawrence; Lu, Jiwei; Wolf, Stuart A.; Wen, Haidan; Tao, Tiger H.; Liu, Mengkun

    2017-10-01

    The strong electron-lattice interactions in correlated electron systems provide unique opportunities for altering the material properties with relative ease and flexibility. In this Rapid Communication, we use localized strain control via a focused-ion-beam patterning of Ti O2 substrates to demonstrate that one can selectively engineer the insulator-to-metal transition temperature, the fractional component of the insulating and metallic phases, and the degree of optical anisotropy down to the length scales of the intrinsic phase separation in V O2 thin films without altering the quality of the films. The effects of localized strain control on the strongly correlated electron system are directly visualized by state-of-the-art IR near-field imaging and spectroscopy techniques and x-ray microdiffraction measurements.

  20. Electro-thermal control of aluminum-doped zinc oxide/vanadium dioxide multilayered thin films for smart-device applications.

    Science.gov (United States)

    Skuza, J R; Scott, D W; Mundle, R M; Pradhan, A K

    2016-02-17

    We demonstrate the electro-thermal control of aluminum-doped zinc oxide (Al:ZnO) /vanadium dioxide (VO2) multilayered thin films, where the application of a small electric field enables precise control of the applied heat to the VO2 thin film to induce its semiconductor-metal transition (SMT). The transparent conducting oxide nature of the top Al:ZnO film can be tuned to facilitate the fine control of the SMT of the VO2 thin film and its associated properties. In addition, the Al:ZnO film provides a capping layer to the VO2 thin film, which inhibits oxidation to a more energetically favorable and stable V2O5 phase. It also decreases the SMT of the VO2 thin film by approximately 5-10 °C because of an additional stress induced on the VO2 thin film and/or an alteration of the oxygen vacancy concentration in the VO2 thin film. These results have significant impacts on technological applications for both passive and active devices by exploiting this near-room-temperature SMT.

  1. Chromium–niobium co-doped vanadium dioxide films: Large temperature coefficient of resistance and practically no thermal hysteresis of the metal–insulator transition

    Directory of Open Access Journals (Sweden)

    Kenichi Miyazaki

    2016-05-01

    Full Text Available We investigated the effects of chromium (Cr and niobium (Nb co-doping on the temperature coefficient of resistance (TCR and the thermal hysteresis of the metal–insulator transition of vanadium dioxide (VO2 films. We determined the TCR and thermal-hysteresis-width diagram of the V1−x−yCrxNbyO2 films by electrical-transport measurements and we found that the doping conditions x ≳ y and x + y ≥ 0.1 are appropriate for simultaneously realizing a large TCR value and an absence of thermal hysteresis in the films. By using these findings, we developed a V0.90Cr0.06Nb0.04O2 film grown on a TiO2-buffered SiO2/Si substrate that showed practically no thermal hysteresis while retaining a large TCR of 11.9%/K. This study has potential applications in the development of VO2-based uncooled bolometers.

  2. Chromium–niobium co-doped vanadium dioxide films: Large temperature coefficient of resistance and practically no thermal hysteresis of the metal–insulator transition

    Energy Technology Data Exchange (ETDEWEB)

    Miyazaki, Kenichi, E-mail: kenichi-miyazaki@denso.co.jp, E-mail: k.shibuya@aist.go.jp [Denso Corporation, Aichi 470-0111 (Japan); University of Tsukuba, Tsukuba 305-8571 (Japan); Shibuya, Keisuke, E-mail: kenichi-miyazaki@denso.co.jp, E-mail: k.shibuya@aist.go.jp; Sawa, Akihito [National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba 305-8565 (Japan); Suzuki, Megumi; Sakai, Kenichi [Denso Corporation, Aichi 470-0111 (Japan); Fujita, Jun-ichi [University of Tsukuba, Tsukuba 305-8571 (Japan)

    2016-05-15

    We investigated the effects of chromium (Cr) and niobium (Nb) co-doping on the temperature coefficient of resistance (TCR) and the thermal hysteresis of the metal–insulator transition of vanadium dioxide (VO{sub 2}) films. We determined the TCR and thermal-hysteresis-width diagram of the V{sub 1−x−y}Cr{sub x}Nb{sub y}O{sub 2} films by electrical-transport measurements and we found that the doping conditions x ≳ y and x + y ≥ 0.1 are appropriate for simultaneously realizing a large TCR value and an absence of thermal hysteresis in the films. By using these findings, we developed a V{sub 0.90}Cr{sub 0.06}Nb{sub 0.04}O{sub 2} film grown on a TiO{sub 2}-buffered SiO{sub 2}/Si substrate that showed practically no thermal hysteresis while retaining a large TCR of 11.9%/K. This study has potential applications in the development of VO{sub 2}-based uncooled bolometers.

  3. The metal-insulator transition in vanadium dioxide: A view at bulk and surface contributions for thin films and the effect of annealing

    Science.gov (United States)

    Yin, W.; West, K. G.; Lu, J. W.; Pei, Y.; Wolf, S. A.; Reinke, P.; Sun, Y.

    2009-06-01

    Vanadium dioxide is investigated as potential oxide barrier in spin switches, and in order to incorporate VO2 layers in complex multilayer devices, it is necessary to understand the relation between bulk and surface/interface properties. Highly oriented VO2 thin films were grown on (0001) sapphire single crystal substrates with reactive bias target ion beam deposition. In the analysis of the VO2 films, bulk-sensitive methods [x-ray diffraction (XRD) and transport measurements] and surface sensitive techniques [photoelectron spectroscopy (PES) and scanning tunneling microscopy and spectroscopy] were employed. The samples were subjected to heating cycles with annealing temperatures of up to 425 and 525K. Prior to annealing the VO2 films exhibit the transition from the monoclinic to the tetragonal phase with the concurrent change in conductivity by more than a factor of 103 and their phase purity is confirmed by XRD. Annealing to 425K and thus cycling across the metal-insulator transition (MIT) temperature has no impact on the bulk properties of the VO2 film but the surface undergoes irreversible electronic changes. The observation of the valence band with PES during the annealing illustrates that the surface adopts a partially metallic character, which is retained after cooling. Annealing to a higher temperature (525K ) triggers a modification of the bulk, which is evidenced by a considerable reduction in the MIT characteristics, and a degradation in crystallite morphology. The local measurement of the conductivity with scanning tunneling spectroscopy shows the transition of the surface from predominantly semiconducting surface prior to annealing to a surface with an overwhelming contribution from metallic sections afterward. The spatial distribution of metallic regions cannot be linked in a unique manner to the crystallite size or location within the crystallites. The onset of oxygen depletion at the surface is held responsible for this behavior. The onset of bulk

  4. Lithium insertion in sputtered vanadium oxide film

    DEFF Research Database (Denmark)

    West, K.; Zachau-Christiansen, B.; Skaarup, S.V.

    1992-01-01

    were oxygen deficient compared to V2O5. Films prepared in pure argon were reduced to V(4) or lower. The vanadium oxide films were tested in solid-state lithium cells. Films sputtered in oxygen showed electrochemical properties similar to crystalline V2O5. The main differences are a decreased capacity...

  5. Complex research of vanadium dioxide in the homoginuity field

    Science.gov (United States)

    Surikov, Vad I.; Semenyuk, N. A.; Surikov, Val I.; Kuznetsova, Y. V.; Pavlovskaya, O. Y.

    2018-01-01

    The complex research results of vanadium dioxide VÜ2±x obtained with X-ray analysis method, a method of vacuum adiabatic calorimeter and Faraday method are discussed. The samples temperature dependences of electrical resistivity, heat capacity, and also magnetic susceptibility are presented and they prove that these characteristics jump abruptly in the phase transition area. Thermophysical, electrical, magnetic properties of vanadium dioxide are established to vary with the oxygen content in the samples. Values of Debye characteristic temperatures θD for samples VO2±x determined at temperature 150 K are presented. Values of entropy change as an amount of electronic and phonon components at phase transition were calculated. The results obtained allow to consider the phase transition of a metal semiconductor as a Mott-Peierls transition, and also to use vanadium dioxide in temperature sensors manufacture.

  6. The fabrication and visible-near-infrared optical modulation of vanadium dioxide/silicon dioxide composite photonic crystal structure

    Science.gov (United States)

    Liang, Jiran; Li, Peng; Song, Xiaolong; Zhou, Liwei

    2017-12-01

    We demonstrated a visible and near-infrared light tunable photonic nanostructure, which is composed of vanadium dioxide (VO2) thin film and silicon dioxide (SiO2) ordered nanosphere arrays. The vanadium films were sputtered on two-dimensional (2D) SiO2 sphere arrays. VO2 thin films were prepared by rapid thermal annealing (RTA) method with different oxygen flow rates. The close-packed VO2 shell formed a continuous surface, the composition of VO2 films in the structure changed when the oxygen flow rates increased. The 2D VO2/SiO2 composite photonic crystal structure exhibited transmittance trough tunability and near-infrared (NIR) transmittance modulation. When the oxygen flow rate increased from 3 slpm to 4 slpm, the largest transmittance trough can be regulated from 904 to 929 nm at low temperature, the transmittance troughs also appear blue shift when the VO2 phase changes from insulator to metal. The composite nanostructure based on VO2 films showed visible transmittance tunability, which would provide insights into the glass color changing in smart windows.

  7. A Vanadium Dioxide Metamaterial Disengaged from Insulator-to-Metal Transition.

    Science.gov (United States)

    Jeong, Young-Gyun; Han, Sanghoon; Rhie, Jiyeah; Kyoung, Ji-Soo; Choi, Jae-Wook; Park, Namkyoo; Hong, Seunghun; Kim, Bong-Jun; Kim, Hyun-Tak; Kim, Dai-Sik

    2015-10-14

    We report that vanadium dioxide films patterned with λ/100000 nanogaps exhibit an anomalous transition behavior at millimeter wavelengths. Most of the hybrid structure's switching actions occur well below the insulator to metal transition temperature, starting from 25 °C, so that the hysteresis curves completely separate themselves from their bare film counterparts. It is found that thermally excited intrinsic carriers are responsible for this behavior by introducing enough loss in the context of the radically modified electromagnetic environment in the vicinity of the nanogaps. This phenomenon newly extends the versatility of insulator to metal transition devices to encompass their semiconductor properties.

  8. Large Spin Hall Angle in Vanadium Film

    Science.gov (United States)

    Wang, Tao; Fan, Xin; Wang, Wenrui; Xie, Yunsong; Warsi, Muhammad A.; Wu, Jun; Chen, Yunpeng; Lorenz, Virginia O.; Xiao, John Q.

    We report the large spin Hall angle observed in Vanadium film with small grain size and distorted lattice parameter. The spin Hall angle is quantified by measuring current-induced spin-orbit torque in V/CoFeB bilayer using optical spin torque magnetometer based on polar magneto-optical Kerr effect (MOKE). The spin Hall angle as large as θSH = -0.071 has been observed in V/CoFeB bilayer Structural analysis, using X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED), confirms films grown at room temperature have very small grain size and enlarged lattice parameter. The Vanadium films with distorted crystal structure also have high resistivity (>200 μΩ cm) and long spin diffusion length (~16.3 nm) measured via spin pumping experiment. This finding of spin Hall effect enhancement in more disordered structure will provide insights for understanding and exploiting materials with strong spin orbit interaction, especially in light 3d transition metals which promise long spin diffusion length.

  9. Ultrafast electron crystallography of the cooperative reaction path in vanadium dioxide

    Directory of Open Access Journals (Sweden)

    Ding-Shyue Yang

    2016-05-01

    Full Text Available Time-resolved electron diffraction with atomic-scale spatial and temporal resolution was used to unravel the transformation pathway in the photoinduced structural phase transition of vanadium dioxide. Results from bulk crystals and single-crystalline thin-films reveal a common, stepwise mechanism: First, there is a femtosecond V−V bond dilation within 300 fs, second, an intracell adjustment in picoseconds and, third, a nanoscale shear motion within tens of picoseconds. Experiments at different ambient temperatures and pump laser fluences reveal a temperature-dependent excitation threshold required to trigger the transitional reaction path of the atomic motions.

  10. Tunable optical antennas enabled by the phase transition in vanadium dioxide.

    Science.gov (United States)

    Earl, Stuart K; James, Timothy D; Davis, Timothy J; McCallum, Jeffrey C; Marvel, Robert E; Haglund, Richard F; Roberts, Ann

    2013-11-04

    Optical antennas, subwavelength metallic structures resonating at visible frequencies, are a relatively new branch of antenna technology being applied in science, technology and medicine. Dynamically tuning the resonances of these antennas would increase their range of application and offer potential increases in plasmonic device efficiencies. Silver nanoantenna arrays were fabricated on a thin film of the phase change material vanadium dioxide (VO(2)) and the resonant wavelength of these arrays was modulated by increasing the temperature of the substrate above the critical temperature (approximately 68 °C). Depending on the array, wavelength modulation of up to 110 nm was observed.

  11. Multilevel radiative thermal memory realized by the hysteretic metal-insulator transition of vanadium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Ito, Kota, E-mail: kotaito@mosk.tytlabs.co.jp; Nishikawa, Kazutaka; Iizuka, Hideo [Toyota Central Research and Development Labs, Nagakute, Aichi 480-1192 (Japan)

    2016-02-01

    Thermal information processing is attracting much interest as an analog of electronic computing. We experimentally demonstrated a radiative thermal memory utilizing a phase change material. The hysteretic metal-insulator transition of vanadium dioxide (VO{sub 2}) allows us to obtain a multilevel memory. We developed a Preisach model to explain the hysteretic radiative heat transfer between a VO{sub 2} film and a fused quartz substrate. The transient response of our memory predicted by the Preisach model agrees well with the measured response. Our multilevel thermal memory paves the way for thermal information processing as well as contactless thermal management.

  12. Lattice-Symmetry-Driven Phase Competition in Vanadium Dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Tselev, Alexander [ORNL; Luk' yanchuk, Prof. Igor A. [University of Picardie Jules Verne, Amiens, France; Ivanov, Ilia N [ORNL; Budai, John D [ORNL; Tischler, Jonathan Zachary [ORNL; Strelcov, Evgheni [Southern Illinois University; Kolmakov, Andrei [Southern Illinois University; Kalinin, Sergei V [ORNL

    2011-01-01

    We performed group-theoretical analysis of the symmetry relationships between lattice structures of R, M1, M2, and T phases of vanadium dioxide in the frameworks of the general Ginzburg-Landau phase transition theory. The analysis leads to a conclusion that the competition between the lower-symmetry phases M1, M2, and T in the metal-insulator transition is pure symmetry driven, since all the three phases correspond to different directions of the same multi-component structural order parameter. Therefore, the lower-symmetry phases can be stabilized in respect to each other by small perturbations such as doping or stress.

  13. X-ray-induced persistent photoconductivity in vanadium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Dietze, S. H.; Marsh, M. J.; Wang, Siming; Ramírez, J. -G.; Cai, Z. -H.; Mohanty, J. R.; Schuller, Ivan K.; Shpyrko, O. G.

    2014-10-08

    The resistivity of vanadium dioxide (VO2) decreased by over one order of magnitude upon localized illumination with x rays at room temperature. Despite this reduction, the structure remained in the monoclinic phase and had no signature of the high-temperature tetragonal phase that is usually associated with the lower resistance. Once illumination ceased, relaxation to the insulating state took tens of hours near room temperature. However, a full recovery of the insulating state was achieved within minutes by thermal cycling. We show that this behavior is consistent with random local-potential fluctuations and random distribution of discrete recombination sites used to model residual photoconductivity.

  14. Vanadium Dioxide: a reconfigurable disordered metamaterial

    Science.gov (United States)

    Capasso, Federico

    2014-03-01

    In VO2 thin films, the Insulator-to-Metal transition occurs gradually with increasing temperature: Nanoscale inclusions of the metallic phase emerge in the surrounding insulating-phase VO2, which grow and these metallic inclusions are much smaller than the scale of the wavelength at infrared frequencies, and thus VO2 can be viewed as a natural, reconfigurable,disordered metamaterial with variable effective optical properties across the phase transition. connect in a percolation process, eventually leading to a fully metallic state at the end of the transition. In Ref., this unique temperature-dependent dispersion of the effective medium was used to demonstrate that a film of VO2, with thickness (≅ 150 nm) much smaller than the wavelength, deposited on sapphire can operate as a temperature tunable absorber; in particular, nearly perfect absorption was achieved at a particular temperature for a narrow range of infrared wavelengths. The reflectivity of such a device varies dramatically and non-monotonically across the phase transition, with the strong absorption feature appearing during an intermediate state of VO2 as a result of coupling to an ``ultra-thin-film resonance''. Since the emissivity of an object is equal to its frequency-dependent absorptivity (Kirchoff's law) such a thin-film VO2-sapphire structure is expected to have an emissivity that also depends strongly and non-monotonically on temperature. This structure displays ``perfect'' blackbody-like thermal emissivity over a narrow wavelength range (approximately 40 cm-1) , surpassing the emissivity of our black-soot reference. We observed large broadband negative differential thermal emittance over a >10 C range: Upon heating, the VO2-sapphire structure emits less thermal radiation and appears colder on an infrared camera. Our experimental approach allows for a direct measurement and extraction of the wavelength- and temperature-dependent thermal emittance. Collaborations with M. A. Kats, S. Ramanathan, D

  15. Vanadium and vanadium nitride thin films grown by high power impulse magnetron sputtering

    Science.gov (United States)

    Hajihoseini, H.; Gudmundsson, J. T.

    2017-12-01

    Thin vanadium and vanadium nitride films were grown on SiO2 by non-reactive and reactive high power impulse magnetron sputtering (HiPIMS), respectively. The film properties were compared to films grown by conventional dc magnetron sputtering (dcMS) at similar conditions. We explored the influence of the stationary magnetic confinement field strength on the film properties and the process parameters. The deposition rate is much lower for non-reactive sputtering by HiPIMS than for dcMS. Furthermore, for both dcMS and HiPIMS the deposition rate is lower for strong magnetic confinement. Structural characterization was carried out using x-ray diffraction and reflection methods as well as atomic force microscopy and scanning electron microscope. Both dcMS and HiPIMS grown vanadium films are polycrystalline with similar grain size regardless of magnetic field strength. For dcMS grown vanadium films the surface roughness is higher when a strong magnetic field is used. For both non-reactive growth of vanadium and reactive growth of vanadium nitride the HiPIMS process produces denser films with lower surface roughness than dcMS does. Lowering the magnetic field strength increases the deposition rate significantly for reactive HiPIMS while it increases only slightly in the reactive dcMS case. The films grown by HiPIMS with strong magnetic confinement exhibit higher density and lower roughness. We find that the operating pressure, growth temperature, discharge voltage and film thickness has influence on the properties of HiPIMS grown vanadium nitride films. The films are denser when grown at high temperature, high discharge voltage and low pressure. The density of those films is lower for thicker films and thicker films consist of larger grain size. For all the films explored, higher density coincides with lower surface roughness. Thus, the deposition method, magnetic field strength, growth temperature, discharge voltage, film thickness and growth pressure have a significant

  16. Raman and XPS characterization of vanadium oxide thin films with temperature

    Energy Technology Data Exchange (ETDEWEB)

    Ureña-Begara, Ferran, E-mail: ferran.urena@uclouvain.be [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium); Crunteanu, Aurelian [XLIM Research Institute, UMR 7252, CNRS/Université de Limoges, Limoges (France); Raskin, Jean-Pierre [Université catholique de Louvain, Institute of Information and Communication Technologies, Electronics and Applied Mathematics (ICTEAM), Louvain-la-Neuve (Belgium)

    2017-05-01

    Highlights: • Comprehensive study of the oxidation of VO{sub 2} thin films from R.T. up to 550 °C. • Phase changes and mixed-valence vanadium oxides formed during the oxidation process. • Reported Raman and XPS signatures for each vanadium oxide. • Monitoring of the current and resistance evolution at the surface of the films. • Oxidation model describing the evolution of the vanadium oxides and phase changes. - Abstract: The oxidation mechanisms and the numerous phase transitions undergone by VO{sub 2} thin films deposited on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates when heated from room temperature (R.T.) up to 550 °C in air are investigated by Raman and X-ray photoelectron spectroscopy. The results show that the films undergo several intermediate phase transitions between the initial VO{sub 2} monoclinic phase at R.T. and the final V{sub 2}O{sub 5} phase at 550 °C. The information about these intermediate phase transitions is scarce and their identification is important since they are often found during the synthesis of vanadium dioxide films. Significant changes in the film conductivity have also been observed to occur associated to the phase transitions. In this work, current and resistance measurements performed on the surface of the films are implemented in parallel with the Raman measurements to correlate the different phases with the conductivity of the films. A model to explain the oxidation mechanisms and phenomena occurring during the oxidation of the films is proposed. Peak frequencies, full-width half-maxima, binding energies and oxidation states from the Raman and X-ray photoelectron spectroscopy experiments are reported and analyzed for all the phases encountered in VO{sub 2} films prepared on SiO{sub 2}/Si and Al{sub 2}O{sub 3} substrates.

  17. Geometric constraints on phase coexistence in vanadium dioxide single crystals.

    Science.gov (United States)

    McGahan, Christina; Gamage, Sampath; Liang, Jiran; Cross, Brendan; Marvel, Robert E; Haglund, Richard F; Abate, Yohannes

    2017-02-24

    The appearance of stripe phases is a characteristic signature of strongly correlated quantum materials, and its origin in phase-changing materials has only recently been recognized as the result of the delicate balance between atomic and mesoscopic materials properties. A vanadium dioxide (VO2) single crystal is one such strongly correlated material with stripe phases. Infrared nano-imaging on low-aspect-ratio, single-crystal VO2 microbeams decorated with resonant plasmonic nanoantennas reveals a novel herringbone pattern of coexisting metallic and insulating domains intercepted and altered by ferroelastic domains, unlike previous reports on high-aspect-ratio VO2 crystals where the coexisting metal/insulator domains appear as alternating stripe phases perpendicular to the growth axis. The metallic domains nucleate below the crystal surface and grow towards the surface with increasing temperature as suggested by the near-field plasmonic response of the gold nanorod antennas.

  18. Optical modulation in silicon-vanadium dioxide photonic structures

    Science.gov (United States)

    Miller, Kevin J.; Hallman, Kent A.; Haglund, Richard F.; Weiss, Sharon M.

    2017-08-01

    All-optical modulators are likely to play an important role in future chip-scale information processing systems. In this work, through simulations, we investigate the potential of a recently reported vanadium dioxide (VO2) embedded silicon waveguide structure for ultrafast all-optical signal modulation. With a VO2 length of only 200 nm, finite-differencetime- domain simulations suggest broadband (200 nm) operation with a modulation greater than 12 dB and an insertion loss of less than 3 dB. Predicted performance metrics, including modulation speed, modulation depth, optical bandwidth, insertion loss, device footprint, and energy consumption of the proposed Si-VO2 all-optical modulator are benchmarked against those of current state-of-the-art all-optical modulators with in-plane optical excitation.

  19. Excimer laser reactive deposition of vanadium nitride thin films

    Science.gov (United States)

    D'Anna, E.; Di Cristoforo, A.; Fernández, M.; Leggieri, G.; Luches, A.; Majni, G.; Mengucci, P.; Nanai, L.

    2002-01-01

    We report on the deposition of thin vanadium nitride films by ablating vanadium targets in low-pressure N 2 atmosphere, and on their characterization. The targets were vanadium foils (purity 99.8%). 3 in. Si(1 1 1) wafers were used as substrates. Film characteristics (composition and crystalline structure) were studied as a function of N 2 pressure (0.5-200 Pa), KrF laser fluence (4.5-19 J/cm 2), substrate temperature (20-750 °C) and target-to-substrate distance (30-70 mm). Vanadium nitride is already formed at low N 2 ambient pressures (1 Pa) and laser fluences (6 J/cm 2) on substrates at room temperature. At the N 2 pressures of 1-10 Pa, the prevalent phase is VN. At higher pressures (100 Pa) and at relatively high laser fluences (16-19 J/cm 2), the dominant phase is V 2N. The crystallinity of the films improves by increasing the substrate temperature. Well-crystallized films are obtained on substrates heated at 500 °C.

  20. Bipolar resistive switching in room temperature grown disordered vanadium oxide thin-film devices

    Science.gov (United States)

    Wong, Franklin J.; Sriram, Tirunelveli S.; Smith, Brian R.; Ramanathan, Shriram

    2013-09-01

    We demonstrate bipolar switching with high OFF/ON resistance ratios (>104) in Pt/vanadium oxide/Cu structures deposited entirely at room temperature. The SET (RESET) process occurs when negative (positive) bias is applied to the top Cu electrode. The vanadium oxide (VOx) films are amorphous and close to the vanadium pentoxide stoichiometry. We also investigated Cu/VOx/W structures, reversing the position of the Cu electrode, and found the same polarity dependence with respect to the top and bottom electrodes, which suggests that the bipolar nature is linked to the VOx layer itself. Bipolar switching can be observed at 100 °C, indicating that it not due to a temperature-induced metal-insulator transition of a vanadium dioxide second phase. We discuss how ionic drift can lead to the bipolar electrical behavior of our junctions, similar to those observed in devices based on several other defective oxides. Such low-temperature processed oxide switches could be of relevance to back-end or package integration processing schemes.

  1. Investigation of electron beam lithography effects on metal–insulator transition behavior of vanadium dioxide

    Science.gov (United States)

    Yuce, H.; Alaboz, H.; Demirhan, Y.; Ozdemir, M.; Ozyuzer, L.; Aygun, G.

    2017-11-01

    Vanadium dioxide (VO2) shows metal–insulator phase transition at nearly 68 °C. This metal–insulator transition (MIT) in VO2 leads to a significant change in near-infrared transmittance and an abrupt change in the resistivity of VO2. Due to these characteristics, VO2 plays an important role on optic and electronic devices, such as thermochromic windows, meta-materials with tunable frequency, uncooled bolometers and switching devices. In this work, VO2 thin films were fabricated by reactive direct current magnetron sputtering in O2/Ar atmosphere on sapphire substrates without any further post annealing processes. The effect of sputtering parameters on optical characteristics and structural properties of grown thin films was investigated by SEM, XRD, Raman and UV/VIS spectrophotometer measurements. Patterning process of VO2 thin films was realized by e-beam lithography technique to monitor the temperature dependent electrical characterization. Electrical properties of VO2 samples were characterized using microprobe station in a vacuum system. MIT with hysteresis behavior was observed for the unpatterned square samples at around 68 °C. By four orders of magnitude of resistivity change was measured for the deposited VO2 thin films at transition temperature. After e-beam lithography process, substantial results in patterned VO2 thin films were observed. In this stage, for patterned VO2 thin films as stripes, the change in resistivity of VO2 was reduced by a factor of 10. As a consequence of electrical resistivity measurements, MIT temperature was shifted from 68 °C to 50 °C. The influence of e-beam process on the properties of VO2 thin films and the mechanism of the effects are discussed. The presented results contribute to the achievement of VO2 based thermochromic windows and bolometer applications.

  2. In situ electrical resistivity measurements of vanadium thin films performed in vacuum during different annealing cycles

    Science.gov (United States)

    Pedrosa, Paulo; Cote, Jean-Marc; Martin, Nicolas; Arab Pour Yazdi, Mohammad; Billard, Alain

    2017-02-01

    The present study describes a sputtering and in situ vacuum electrical resistivity setup that allows a more efficient sputtering-oxidation coupling process for the fabrication of oxide compounds like vanadium dioxide, VO2. After the sputtering deposition of pure V thin films, the proposed setup enables the sample holder to be transferred from the sputtering to the in situ annealing + resistivity chamber without venting the whole system. The thermal oxidation of the V films was studied by implementing two different temperature cycles up to 550 °C, both in air (using a different resistivity setup) and vacuum conditions. Main results show that the proposed system is able to accurately follow the different temperature setpoints, presenting clean and low-noise resistivity curves. Furthermore, it is possible to identify the formation of different vanadium oxide phases in air, taking into account the distinct temperature cycles used. The metallic-like electrical properties of the annealed coatings are maintained in vacuum whereas those heated in air produce a vanadium oxide phase mixture.

  3. Vanadium

    OpenAIRE

    Pourret, Olivier; Dia, Aline

    2017-01-01

    International audience; Vanadium (chemical symbol, V) is a d-block transition metal,silver in color, appearing in the first long period of the peri-odic table between titanium and chromium. Vanadium hastwo stable isotopes: 50V and 51V, with atomic abundance of0.25 % and 99.75 %, respectively. Vanadium has several oxidation forms (between 2+ and 5+). In the lithosphere, Voccurs as reducing V(III) form, whereas in oxidizing con- ditions V prevails under V(IV) form. Vanadium(II) is partic- ularl...

  4. Electrochemical lithium intercalation into vanadium pentoxide xerogel film electrode

    Energy Technology Data Exchange (ETDEWEB)

    Pyun, Su Il; Bae, Joon Sung [Korea Advanced Inst. of Science and Technology, Daejon (Korea, Republic of). Dept. of Materials Science and Engineering

    1997-10-01

    The lithium-ion transport in vanadium pentoxide xerogel film electrodes has been investigated by using cyclic voltammetry and electrochemical impedance spectroscopy. The oxide xerogel film electrodes were prepared by spin-coating a viscous gel on an indium tin oxide (ITO) substrate. The spin-coated xerogel films were dried under vacuum at 130 and 270 C, respectively. The lithium intercalation into the xerogel film electrode dried at 270 C is limited by the interfacial reaction at the electrolyte/electrode interface rather than the lithium-ion transport in the oxide electrode. On the other hand, lithium intercalation into the film electrode dried at 130 C is largely limited by the lithium transport in the oxide film, and the chemical diffusivity of the lithium ion in the oxide film was determined to decrease from 10{sup -10} to 10{sup -12} cm{sup 2} s{sup -1} as the electrode potential of the oxide film fell from 3.0 to 2.2 V{sub Li/Li{sup +}}. The tranition of the diffusion-controlled intercalation to the interfacial reaction-controlled intercalation into the oxide xerogel film with decreasing drying temperature was explained in terms of the modification of the oxide lattice to a more open-structured lattice by structural modification of the oxide film by water molecules incorporated into the film. (orig.)

  5. Hydrogen stabilization of metallic vanadium dioxide in single-crystal nanobeams

    Science.gov (United States)

    Wei, Jiang; Ji, Heng; Guo, Wenhua; Nevidomskyy, Andriy H.; Natelson, Douglas

    2012-06-01

    Vanadium dioxide is a strongly correlated material that undergoes a metal-insulator transition from a high-temperature, rutile metal to a monoclinic insulating state at 67 °C. In recent years, experiments on single-crystal vanadium-dioxide nanowires grown by physical vapour deposition have shed light on the crucial role of strain in the structural and electronic phase diagram of this material, including evidence for a new M2 phase, but the detailed physics of this material is still not fully understood. The transition temperature can be reduced by doping with tungsten, but this process is not reversible. Here, we show that the metal-insulator transition in nanoscale beams of vanadium dioxide can be strongly modified by doping with atomic hydrogen using the catalytic spillover method. We also show that this process is completely reversible, and that the metal-insulator transition eventually vanishes when the doping exceeds a threshold value. Raman and conventional optical microscopy, electron diffraction and transmission electron microscopy provide evidence that the structure of the metallic post-hydrogenation state is similar to that of the rutile state. First-principles electronic structure calculations confirm that a distorted rutile structure is energetically favoured following hydrogenation, and also that such doping favours metallicity from both the Mott and Peierls perspectives. We anticipate that hydrogen doping will be a powerful tool for examining the metal-insulator transition and for engineering the properties of vanadium dioxide.

  6. Mechanical and electrochemical characterization of vanadium nitride (VN) thin films

    Energy Technology Data Exchange (ETDEWEB)

    Caicedo, J.C., E-mail: Jcesarca@calima.univalle.edu.co [Grupo de Peliculas Delgadas, Departamento de Fisica, Universidad del Valle, Cali (Colombia); Zambrano, G. [Grupo de Peliculas Delgadas, Departamento de Fisica, Universidad del Valle, Cali (Colombia); Aperador, W. [Ingenieria Mecatronica, Universidad Militar Nueva Granada, Bogota (Colombia); Escobar-Alarcon, L.; Camps, E. [Departamento de Fisica, Instituto Nacional de Investigaciones Nucleares, Apdo. Postal 18-1027, Mexico, DF 11801 (Mexico)

    2011-10-15

    Vanadium nitride (V-N) thin films were grown using a reactive d.c. magnetron sputtering process, from a vanadium target (99.999%) in an Ar/N{sub 2} gas mixture at different deposition bias voltage. Films were deposited onto silicon (1 0 0) and RUS-3 steel substrates at 400 deg. C. Structural, compositional, mechanical and electrochemical characterizations were performed by X-ray diffraction (XRD), elastic forward analysis (EFA), nanoindentation, electrochemical impedance spectroscopy (EIS), and Tafel polarization curves, respectively. X-ray diffraction patterns show the presence of (1 1 1) and (2 0 0) crystallographic orientations associated to the V-N cubic phase. Nanoindentation measurements revealed that when the bias voltage increases from 0 V to -150 V the hardness and elastic modulus are increased from 11 GPa to 20 GPa and from 187 GPa to 221 GPa, respectively. EIS and Tafel curves showed that the corrosion rate of steel, coated with V-N single layer films deposited without bias voltage, diminishes 90% compared to the steel without this coating. On the other hand, when the V-N coating was deposited at the highest d.c. bias voltage (-150 V), the corrosion rate was greater than in the steel coated with zero-voltage (0 V) V-N films. This last result could be attributed to the formation of porosities produced by the ion bombardment during the deposition process.

  7. Mechanical and electrochemical characterization of vanadium nitride (VN) thin films

    Science.gov (United States)

    Caicedo, J. C.; Zambrano, G.; Aperador, W.; Escobar-Alarcon, L.; Camps, E.

    2011-10-01

    Vanadium nitride (V-N) thin films were grown using a reactive d.c. magnetron sputtering process, from a vanadium target (99.999%) in an Ar/N 2 gas mixture at different deposition bias voltage. Films were deposited onto silicon (1 0 0) and RUS-3 steel substrates at 400 °C. Structural, compositional, mechanical and electrochemical characterizations were performed by X-ray diffraction (XRD), elastic forward analysis (EFA), nanoindentation, electrochemical impedance spectroscopy (EIS), and Tafel polarization curves, respectively. X-ray diffraction patterns show the presence of (1 1 1) and (2 0 0) crystallographic orientations associated to the V-N cubic phase. Nanoindentation measurements revealed that when the bias voltage increases from 0 V to -150 V the hardness and elastic modulus are increased from 11 GPa to 20 GPa and from 187 GPa to 221 GPa, respectively. EIS and Tafel curves showed that the corrosion rate of steel, coated with V-N single layer films deposited without bias voltage, diminishes 90% compared to the steel without this coating. On the other hand, when the V-N coating was deposited at the highest d.c. bias voltage (-150 V), the corrosion rate was greater than in the steel coated with zero-voltage (0 V) V-N films. This last result could be attributed to the formation of porosities produced by the ion bombardment during the deposition process.

  8. Vanadium

    Science.gov (United States)

    Kelley, Karen D.; Scott, Clinton T.; Polyak, Désirée E.; Kimball, Bryn E.; Schulz, Klaus J.; DeYoung, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    Vanadium is used primarily in the production of steel alloys; as a catalyst for the chemical industry; in the making of ceramics, glasses, and pigments; and in vanadium redox-flow batteries (VRBs) for large-scale storage of electricity. World vanadium resources in 2012 were estimated to be 63 million metric tons, which include about 14 million metric tons of reserves. The majority of the vanadium produced in 2012 was from China, Russia, and South Africa.Vanadium is extracted from several different types of mineral deposits and from fossil fuels. These deposits include vanadiferous titanomagnetite (VTM) deposits, sandstone-hosted vanadium (with or without uranium) deposits (SSV deposits), and vanadium-rich black shales. VTM deposits are the principal source of vanadium and consist of magmatic accumulations of ilmenite and magnetite containing 0.2 to 1 weight percent vanadium pentoxide (V2O5). SSV deposits are another important source; these deposits have average ore grades that range from 0.1 to greater than 1 weight percent V2O5. The United States has been and is currently the main producer of vanadium from SSV deposits, particularly those on the Colorado Plateau. Vanadium-rich black shales occur in marine successions that were deposited in epeiric (inland) seas and on continental margins. Concentrations in these shales regularly exceed 0.18 weight percent V2O5 and can be as high as 1.7 weight percent V2O5. Small amounts of vanadium have been produced from the Alum Shale in Sweden and from ferrophosphorus slag generated during the reduction of phosphate to elemental phosphorus in ore from shales of the Phosphoria Formation in Idaho and Wyoming. Because vanadium enrichment occurs in beds that are typically only a few meters thick, most of the vanadiferous black shales are not currently economic, although they may become an important resource in the future. Significant amounts of vanadium are recovered as byproducts of petroleum refining, and processing of coal, tar

  9. High Pressure Crystalline Structure and Resistance of Vanadium Dioxide to 13.5 GPa

    Science.gov (United States)

    Brady, Nathaniel; Appavoo, Kannatassen; Montgomery, Jeffery; Vohra, Yogesh; Haglund, Richard; Hilton, David

    2013-03-01

    We have investigated the insulator-to-metal transition in thin film vanadium dioxide as a function of pressure at ambient temperature using a designer diamond anvil cell (DAC). Four-point probe resistance measurements show a monotonic decrease over the entire pressure range studied with no significant discontinuity. High-pressure X-ray diffraction measurements observe an M1 (P21 / c) phase at 0 GPa, an M2 (C2/m) phase from 0.8 GPa to 1.1 GPa, and a reentrant M1 phase from 1.1 GPa to 13.5 GPa. Crystal refinement above 1.1 GPa shows a monotonically decreasing a, b and c lattice constants and a minimum in the monoclinic angle, β, near 8.5 +/-0.5 GPa. The atomic positions show that the first V-V nearest neighbor distance (d) decreases over the entire pressure range, the second nearest neighbor distance (s) increases until 5 GPa after which it is constant with s ~ f ~3.2 Å. The next most closely spaced V-V distance (f), which corresponds to V atoms in different unit cells, is approximately constant across the entire pressure range measured. NB and JM acknowledge support from the US Dept. Education GAANN Fellowship (P200A090143). KA and RH acknowledge support from the Office of Science, US Department of Energy (DE- FG02-01ER45916).

  10. Vanadium dioxide based Fabry-Perot emitter for dynamic radiative cooling applications

    Science.gov (United States)

    Taylor, Sydney; Yang, Yue; Wang, Liping

    2017-08-01

    An asymmetric Fabry-Perot emitter is proposed with a lossless dielectric spacer inserted between a vanadium dioxide (VO2) thin film and an opaque aluminum substrate. Switchable mid-infrared emittance has been achieved due to the insulator-to-metal transition of VO2. When VO2 is dielectric below 341 K, the structure is highly reflective, thereby minimizing thermal radiation loss. Above 345 K, the VO2 becomes metallic and forms a Fabry-Perot resonance cavity with high broadband emissivity around 10 μm wavelength, providing a radiative cooling effect due to enhanced thermal emission. The radiative properties are calculated via a uniaxial transfer matrix method and Bruggeman effective medium theory. The physical mechanisms that provide the observed absorption enhancements are elucidated by examining the total phase shift in the multilayer structure and the phonon modes of VO2. When experiencing the VO2 phase transition, the radiative power of the proposed coating achieves a 6.5 fold enhancement for extraterrestrial spacecraft systems, and 7.3 fold enhancement for terrestrial systems such as buildings, making it a promising choice for dynamic radiative cooling applications in a variable environment. The findings here will facilitate research and development of novel coating materials for radiative cooling applications.

  11. Analyzing optical properties of thin vanadium oxide films through semiconductor-to-metal phase transition using spectroscopic ellipsometry

    Science.gov (United States)

    Sun, Jianing; Pribil, Greg K.

    2017-11-01

    We investigated the optical behaviors of vanadium dioxide (VO2) films through the semiconductor-to-metal (STM) phase transition using spectroscopic ellipsometry. Correlations between film thickness and refractive index were observed resulting from the absorbing nature of these films. Simultaneously analyzing data at multiple temperatures using Kramers-Kronig consistent oscillator models help identify film thickness. Nontrivial variations in resulting optical constants were observed through STM transition. As temperature increases, a clear increase is observed in near infrared absorption due to Drude losses that accompany the transition from semiconducting to metallic phases. Thin films grown on silicon and sapphire substrate present different optical properties and thermal hysteresis due to lattice stress and compositional differences.

  12. Atomic layer deposition of VO{sub 2} films with Tetrakis-dimethyl-amino vanadium (IV) as vanadium precursor

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Xinrui [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Cao, Yunzhen, E-mail: yzhcao@mail.sic.ac.cn [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China); Yan, Lu; Li, Ying; Song, Lixin [Key Laboratory of Inorganic Coating Materials CAS, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2017-02-28

    Highlights: • VO{sub 2} film was easily deposited by ALD using novel vanadium precursor V(NMe{sub 2}){sub 4}. • Deposition and annealing condition were systematically investigated. • Comparable transition properties of VO{sub 2} film on resistance and spectral transmittance were studied. - Abstract: VO{sub 2} thin films have been grown on Si(100) (VO{sub 2}/Si) and fused silica substrates (VO{sub 2}/SiO{sub 2}) by atomic layer deposition (ALD) using tetrakis-dimethyl-amino vanadium (IV) (TDMAV) as a novel vanadium precursor and water as reactant gas. The quartz crystal microbalance (QCM) measurement was performed to study the ALD process of VO{sub 2} thin film deposition, and a constant growth rate of about 0.95 Å/cycle was obtained at the temperature range of 150–200 °C. XRD measurement was performed to study the influence of deposition temperature and post-annealing condition on the crystallization of VO{sub 2} films, which indicated that the films deposited between 150 and 200 °C showed well crystallinity after annealing at 475 °C for 100 min in Ar atmosphere. XPS measurement verified that the vanadium oxidation state was 4+ for both as-deposited film and post-annealed VO{sub 2}/Si film. AFM was applied to study the surface morphology of VO{sub 2}/Si films, which showed a dense polycrystalline film with roughness of about 1 nm. The resistance of VO{sub 2}/Si films deposited between 150 °C and 200 °C as a function of temperature showed similar semiconductor-to-metal transition (SMT) characters with the transition temperature for heating branch (T{sub c,h}) of about 72 °C, a hysteresis width of about 10 °C and the resistance change of two orders of magnitude. The increase of T{sub c,h} compared with the bulk VO{sub 2} (68 °C) may be attributed to the tensile stress along the c-axis in the film. Transmittance measurement of VO{sub 2}/SiO{sub 2} films showed typical thermochromic property with a NIR switching efficiency of above 50% at 2 μm across

  13. Vanadium Dioxide as a Natural Disordered Metamaterial: Perfect Thermal Emission and Large Broadband Negative Differential Thermal Emittance

    Science.gov (United States)

    Kats, Mikhail A.; Blanchard, Romain; Zhang, Shuyan; Genevet, Patrice; Ko, Changhyun; Ramanathan, Shriram; Capasso, Federico

    2013-10-01

    We experimentally demonstrate that a thin (approximately 150-nm) film of vanadium dioxide (VO2) deposited on sapphire has an anomalous thermal emittance profile when heated, which arises because of the optical interaction between the film and the substrate when the VO2 is at an intermediate state of its insulator-metal transition (IMT). Within the IMT region, the VO2 film comprises nanoscale islands of the metal and dielectric phases and can thus be viewed as a natural, disordered metamaterial. This structure displays “perfect” blackbodylike thermal emissivity over a narrow wavelength range (approximately 40cm-1), surpassing the emissivity of our black-soot reference. We observe large broadband negative differential thermal emittance over a >10°C range: Upon heating, the VO2-sapphire structure emits less thermal radiation and appears colder on an infrared camera. Our experimental approach allows for a direct measurement and extraction of wavelength- and temperature-dependent thermal emittance. We anticipate that emissivity engineering with thin-film geometries comprising VO2 and other thermochromic materials will find applications in infrared camouflage, thermal regulation, and infrared tagging and labeling.

  14. Vanadium Dioxide as a Natural Disordered Metamaterial: Perfect Thermal Emission and Large Broadband Negative Differential Thermal Emittance

    Directory of Open Access Journals (Sweden)

    Mikhail A. Kats

    2013-10-01

    Full Text Available We experimentally demonstrate that a thin (approximately 150-nm film of vanadium dioxide (VO_{2} deposited on sapphire has an anomalous thermal emittance profile when heated, which arises because of the optical interaction between the film and the substrate when the VO_{2} is at an intermediate state of its insulator-metal transition (IMT. Within the IMT region, the VO_{2} film comprises nanoscale islands of the metal and dielectric phases and can thus be viewed as a natural, disordered metamaterial. This structure displays “perfect” blackbodylike thermal emissivity over a narrow wavelength range (approximately 40  cm^{-1}, surpassing the emissivity of our black-soot reference. We observe large broadband negative differential thermal emittance over a >10 °C range: Upon heating, the VO_{2}-sapphire structure emits less thermal radiation and appears colder on an infrared camera. Our experimental approach allows for a direct measurement and extraction of wavelength- and temperature-dependent thermal emittance. We anticipate that emissivity engineering with thin-film geometries comprising VO_{2} and other thermochromic materials will find applications in infrared camouflage, thermal regulation, and infrared tagging and labeling.

  15. IMPEDANCE SPECTROSCOPY OF POLYCRYSTALLINE TIN DIOXIDE FILMS

    Directory of Open Access Journals (Sweden)

    D. V. Adamchuck

    2016-01-01

    Full Text Available The aim of this work is the analysis of the influence of annealing in an inert atmosphere on the electrical properties and structure of non-stoichiometric tin dioxide films by means of impedance spectroscopy method. Non-stoichiometric tin dioxide films were fabricated by two-step oxidation of metallic tin deposited on the polycrystalline Al2O3 substrates by DC magnetron sputtering. In order to modify the structure and stoichiometric composition, the films were subjected to the high temperature annealing in argon atmosphere in temperature range 300–800 °С. AC-conductivity measurements of the films in the frequency range 20 Hz – 2 MHz were carried out. Variation in the frequency dependencies of the real and imaginary parts of the impedance of tin dioxide films was found to occur as a result of high-temperature annealing. Equivalent circuits for describing the properties of films with various structure and stoichiometric composition were proposed. Possibility of conductivity variation of the polycrystalline tin dioxide films as a result of аnnealing in an inert atmosphere was demonstrated by utilizing impedance spectroscopy. Annealing induces the recrystallization of the films, changing in their stoichiometry as well as increase of the sizes of SnO2 crystallites. Variation of electrical conductivity and structure of tin dioxide films as a result of annealing in inert atmosphere was confirmed by X-ray diffraction analysis. Analysis of the impedance diagrams of tin dioxide films was found to be a powerful tool to study their electrical properties. 

  16. System Assessment of Carbon Dioxide Used as Gas Oxidant and Coolant in Vanadium-Extraction Converter

    Science.gov (United States)

    Du, Wei Tong; Wang, Yu; Liang, Xiao Ping

    2017-10-01

    With the aim of reducing carbon dioxide (CO2) emissions and of using waste resources in steel plants, the use of CO2 as a gas oxidant and coolant in the converter to increase productivity and energy efficiency was investigated in this study. Experiments were performed in combination with thermodynamic theory on vanadium-extraction with CO2 and oxygen (O2) mixed injections. The results indicate that the temperature of the hot metal bath decreased as the amount of CO2 introduced into O2 increased. At an injection of 85 vol.% O2 and 15 vol.% CO2, approximately 12% of additional carbon was retained in the hot metal. Moreover, the content of vanadium trioxide in the slag was higher. In addition, the O2 consumption per ton of hot metal was reduced by 8.5% and additional chemical energy was recovered by the controlled injection of CO2 into the converter. Therefore, using CO2 as a gas coolant was conducive to vanadium extraction, and O2 consumption was reduced.

  17. Three-terminal field effect devices utilizing thin film vanadium oxide as the channel layer

    Science.gov (United States)

    Ruzmetov, Dmitry; Gopalakrishnan, Gokul; Ko, Changhyun; Narayanamurti, Venkatesh; Ramanathan, Shriram

    2010-06-01

    Electrostatic control of the metal-insulator transition (MIT) in an oxide semiconductor could potentially impact the emerging field of oxide electronics. Vanadium dioxide (VO2) is of particular interest due to the fact that the MIT happens in the vicinity of room temperature and it is considered to exhibit the Mott transition. We present a detailed account of our experimental investigation into three-terminal field effect transistor-like devices using thin film VO2 as the channel layer. The gate is separated from the channel through an insulating gate oxide layer, enabling true probing of the field effect with minimal or no interference from large leakage currents flowing directly from the electrode. The influence of the fabrication of multiple components of the device, including the gate oxide deposition, on the VO2 film characteristics is discussed. Further, we discuss the effect of the gate voltage on the device response, point out some of the unusual characteristics including temporal dependence. A reversible unipolar modulation of the channel resistance upon the gate voltage is demonstrated for the first time in optimally engineered devices. The results presented in this work are of relevance toward interpreting gate voltage response in such oxides as well as addressing challenges in advancing gate stack processing for oxide semiconductors.

  18. Sulfur-vanadium oxide gel composites as thin film cathodes for rechargeable lithium batteries

    Energy Technology Data Exchange (ETDEWEB)

    Mukherjee, S.P.; Gavrilov, A.B.; Skotheim, T.A.

    1998-07-01

    A class of novel electroactive cathode materials based on composites produced from elemental sulfur and vanadium oxide xerogels or aerogels has been developed as models for lithium battery applications. The use of elemental sulfur in rechargeable lithium batteries has been hindered due to certain limitations such as, very low electronic conductivity and the out-diffusion of polysulfides during the cycling process which reduces the cycling efficiency. Vanadium oxide xerogels and aerogels have certain desirable characteristic physico-chemical properties, such as, high surface areas with nono-scale interconnecting porosity, high electronic conductivity, non- or nanocrystallinity, and oxidation reduction catalytic activity. Since these properties may improve the performance of sulfur based rechargeable batteries, a family of composite cathodes containing elemental sulfur and vanadium oxide gels were produced. The performance of the composites cathodes, in thin film form, were evaluated in coin cells and AA cells with metallic lithium anodes and liquid electrolytes. The multifunctional role of vanadium oxide gels on the cell performance of the cells having composite cathodes has been qualitatively explored. Results indicate that the cathodes having xerogel composites based on vanadium oxide sol from vanadium oxide isopropoxide can be made with high sulfur content (80 wt %) and with low carbon content (5 wt %) and without any polymer binder. This shows the contribution of adhesive properties and electronic conductivity of vanadium oxide xerogels. A significant suppression of polysulfide out-diffusion is observed with appropriate processing of the composite cathodes. It is anticipated that the nanoscale interconnecting porosity of gels plays an important role in this behavior. An excellent rate capability is observed with the vanadium-oxide sulfur composite cathodes indicating the contribution of intrinsic electrochemical properties of the vanadium oxide.

  19. Thermally driven analog of the Barkhausen effect at the metal-insulator transition in vanadium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Huber-Rodriguez, Benjamin; Ji, Heng; Chen, Chih-Wei [Department of Physics and Astronomy, Rice University, Houston, Texas 77005 (United States); Kwang, Siu Yi [Department of Physics, National University of Singapore, Singapore 117551 (Singapore); Hardy, Will J. [Applied Physics Program, Rice Quantum Institute, Rice University, Houston, Texas 77005 (United States); Morosan, Emilia [Department of Physics and Astronomy, Rice University, Houston, Texas 77005 (United States); Department of Chemistry, Rice University, Houston, Texas 77005 (United States); Department of Materials Science and Nanoengineering, Rice University, Houston, Texas 77005 (United States); Natelson, Douglas [Department of Physics and Astronomy, Rice University, Houston, Texas 77005 (United States); Department of Materials Science and Nanoengineering, Rice University, Houston, Texas 77005 (United States); Department of Electrical and Computer Engineering, Rice University, Houston, Texas 77005 (United States)

    2014-09-29

    The physics of the metal-insulator transition (MIT) in vanadium dioxide remains a subject of intense interest. Because of the complicating effects of elastic strain on the phase transition, there is interest in comparatively strain-free means of examining VO{sub 2} material properties. We report contact-free, low-strain studies of the MIT through an inductive bridge approach sensitive to the magnetic response of VO{sub 2} powder. Rather than observing the expected step-like change in susceptibility at the transition, we argue that the measured response is dominated by an analog of the Barkhausen effect, due to the extremely sharp jump in the magnetic response of each grain as a function of time as the material is cycled across the phase boundary. This effect suggests that future measurements could access the dynamics of this and similar phase transitions.

  20. Effect of quantum confinement on thermoelectric properties of vanadium dioxide nanofilms

    Science.gov (United States)

    Khan, G. R.; Ahmad, Bilal

    2017-12-01

    The quantum confinement effect on thermoelectric properties of pristine vanadium dioxide (VO2) nanofilms across semiconductor to metal phase transition (SMT) has been demonstrated by studying VO2 nanofilms of 15 nm thickness in comparison to microfilms of 290 nm thickness synthesized via inorganic sol-gel method casted on glass substrates by spin coating technique. The ebbing of phase transition temperature in nanofilms across SMT was consistent with the results obtained from resistance-temperature hysteresis contour during SMT dynamics of the nanofilms. The temperature dependent Hall and Seebeck measurements revealed that electrons were the charge carriers in the nanofilms and that the value of charge carrier concentration increased as much as 4 orders of magnitude while going across SMT which stood responsible almost entirely for resistance variations. The decline in carrier mobility and escalation in Seebeck coefficient in the low temperature semiconducting region were splendidly witnessed across SMT.

  1. Electrical and Infrared Optical Properties of Vanadium Oxide Semiconducting Thin-Film Thermometers

    Science.gov (United States)

    Zia, Muhammad Fakhar; Abdel-Rahman, Mohamed; Alduraibi, Mohammad; Ilahi, Bouraoui; Awad, Ehab; Majzoub, Sohaib

    2017-10-01

    A synthesis method has been developed for preparation of vanadium oxide thermometer thin film for microbolometer application. The structure presented is a 95-nm thin film prepared by sputter-depositing nine alternating multilayer thin films of vanadium pentoxide (V2O5) with thickness of 15 nm and vanadium with thickness of 5 nm followed by postdeposition annealing at 300°C in nitrogen (N2) and oxygen (O2) atmospheres. The resulting vanadium oxide (V x O y ) thermometer thin films exhibited temperature coefficient of resistance (TCR) of -3.55%/°C with room-temperature resistivity of 2.68 Ω cm for structures annealed in N2 atmosphere, and TCR of -3.06%/°C with room-temperature resistivity of 0.84 Ω cm for structures annealed in O2 atmosphere. Furthermore, optical measurements of N2- and O2-annealed samples were performed by Fourier-transform infrared ellipsometry to determine their dispersion curves, refractive index ( n), and extinction coefficient ( k) at wavelength from 7000 nm to 14,000 nm. The results indicate the possibility of applying the developed materials in thermometers for microbolometers.

  2. Structural, optical and electrochemical properties of F-doped vanadium oxide transparent semiconducting thin films

    Science.gov (United States)

    Mousavi, M.; Khorrami, Gh. H.; Kompany, A.; Yazdi, Sh. Tabatabai

    2017-12-01

    In this study, F-doped vanadium oxide thin films with doping levels up to 60 at % were prepared by spray pyrolysis method on glass substrates. To measure the electrochemical properties, some films were deposited on fluorine-tin oxide coated glass substrates. The effect of F-doping on the structural, electrical, optical and electrochemical properties of vanadium oxide samples was investigated. The X-ray diffractographs analysis has shown that all the samples grow in tetragonal β-V2O5 phase structure with the preferred orientation of [200]. The intensity of (200) peak belonging to β-V2O5 phase was strongest in the undoped vanadium oxide film. The scanning electron microscopy images show that the samples have nanorod- and nanobelt-shaped structure. The size of the nanobelts in the F-doped vanadium oxide films is smaller than that in the pure sample and the width of the nanobelts increases from 30 to 70 nm with F concentration. With increasing F-doping level from 10 to 60 at %, the resistivity, the transparency and the optical band gap decrease from 111 to 20 Ω cm, 70 to 50% and 2.4 to 2.36 eV, respectively. The cyclic voltammogram (CV) results show that the undoped sample has the most extensive CV and by increasing F-doping level from 20 to 60 at %, the area of the CV is expanded. The anodic and cathodic peaks in F-doped samples are stronger.

  3. Sputter-deposited low reflectance vanadium oxide-molybdenum oxide thin films on silicon

    Science.gov (United States)

    Nayak, Manish Kumar; Esther, A. Carmel Mary; Bera, Parthasarathi; Dey, Arjun

    2017-09-01

    A single layer antireflective, smart, crystalline and nanocolumnar pulsed RF magnetron sputtered vanadium oxide-molybdenum oxide thin film on silicon is proposed for the alternate antireflective material for silicon based futuristic solar cell application. The VO-MO film with 130 nm thickness grown at 200 W shows significant low reflectance (1% within the 500-600 nm region). The VO-MO film with lowest reflectance shows a phase transition at around 55 °C which is beneficial due to film inherent variable IR emittance behaviour which may be helpful for eliminating excess heat load generated during in-service of silicon solar cell.

  4. Ferromagnetism in vanadium-doped Bi2Se3 topological insulator films

    Directory of Open Access Journals (Sweden)

    Liguo Zhang

    2017-07-01

    Full Text Available With molecular beam epitaxy, we grew uniformly vanadium-doped Bi2Se3 films which exhibit ferromagnetism with perpendicular magnetic anisotropy. A systematic study on the magneto-transport properties of the films revealed the crucial role of topological surface states in ferromagnetic coupling. The enhanced ferromagnetism with reduced carrier density can support quantum anomalous Hall phase in the films, though the anomalous Hall resistance is far from quantization due to high carrier density. The topological surface states of films exhibit a gap of ∼180 meV which is unlikely to be magnetically induced but may significantly influence the quantum anomalous Hall effect in the system.

  5. Properties of electrochromic nickel-vanadium oxide films sputter-deposited from nonmagnetic alloy target

    Science.gov (United States)

    Avendano, Esteban; Azens, Andris; Niklasson, Gunnar A.

    2001-11-01

    In this study we investigate the structure, composition, diffusion coefficient, and electrochromic properties of nickel-vanadium oxide films as a function of deposition conditions. Polycrystalline films have been deposited by DC magnetron sputtering from a nonmagnetic target of Ni0.93V0.07 in an atmosphere of O2/Ar and Ar/O2/H2, with the gas flow ratios varied systematically to cover the range from nearly-metallic to overoxidized films. The results contradict the usual view that films deposited in O2/Ar are dark brown in their as-deposited state. While such films can easily be deposited, the optimum electrochromic properties have been observed at O2/Ar ratios giving nearly transparent films. Addition of hydrogen to the sputtering atmosphere improved cycling stability of the films. The diffusion coefficient has been determined by the Galvanostatic Intermittent Titration Technique (GITT).

  6. Large phonon entropy drives the metallization of vanadium dioxide (VO2)

    Science.gov (United States)

    Hong, Jiawang

    2015-03-01

    Vanadium dioxide (VO2) exhibits a first-order metal-insulator transition (MIT) near room temperature, where conductivity is suppressed and the lattice changes from tetragonal to monoclinic on cooling. This MIT in VO2 has attracted intense interest from both fundamental and technological perspectives. However, most studies performed in the past 50 years have focused on the electronic structure and energetics of the transition, ignoring the role of phonons and their entropic contribution to the phase stability. Much of the reason is that the standard tool of neutron scattering does not yield coherent scattering from V nuclei, and first-principles methods with harmonic approximation cannot capture the stable phonons for the rutile phase. We close this gap by using a combination of ab initio molecular dynamics calculations and neutron/x-ray scattering to establish that the entropy driving the MIT is dominated by soft, anharmonic phonons of the metallic phase. The MIT results from the competition between lower electronic energy in insulating M1 phase due to the Peierls instability, and the higher entropy of the metallic rutile phase resulting from soft anharmonic phonons. This understanding of the role of lattice dynamics and their relationship to electronic structure provides a critical component for developing more complete physical models of phase competition in functional transition metal oxides. Theoretical calculations were performed using the NERSC at LBNL. Modeling of neutron data was performed in CAMM, measurements were funded by the US DOE, BES, Materials Science and Engineering Division.

  7. Stress compensation for arbitrary curvature control in vanadium dioxide phase transition actuators

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Kaichen, E-mail: dkc12@mails.tsinghua.edu.cn, E-mail: wuj@berkeley.edu [Department of Materials Science and Engineering, University of California, Berkeley, California 94720 (United States); Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Beijing 100084 (China); Lou, Shuai; Choe, Hwan Sung; Yao, Jie; Wu, Junqiao, E-mail: dkc12@mails.tsinghua.edu.cn, E-mail: wuj@berkeley.edu [Department of Materials Science and Engineering, University of California, Berkeley, California 94720 (United States); Materials Sciences Division, Lawrence Berkeley National Laboratory, Berkeley, California 94720 (United States); Liu, Kai [School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); You, Zheng [State Key Laboratory of Precision Measurement Technology and Instruments, Department of Precision Instrument, Tsinghua University, Beijing 100084 (China)

    2016-07-11

    Due to its thermally driven structural phase transition, vanadium dioxide (VO{sub 2}) has emerged as a promising material for micro/nano-actuators with superior volumetric work density, actuation amplitude, and repetition frequency. However, the high initial curvature of VO{sub 2} actuators severely obstructs the actuation performance and application. Here, we introduce a “seesaw” method of fabricating tri-layer cantilevers to compensate for the residual stress and realize nearly arbitrary curvature control of VO{sub 2} actuators. By simply adjusting the thicknesses of the individual layers, cantilevers with positive, zero, or negative curvatures can be engineered. The actuation amplitude can be decoupled from the curvature and controlled independently as well. Based on the experimentally measured residual stresses, we demonstrate sub-micron thick VO{sub 2} actuators with nearly zero final curvature and a high actuation amplitude simultaneously. This “seesaw” method can be further extended to the curvature engineering of other microelectromechanical system multi-layer structures where large stress-mismatch between layers are inevitable.

  8. Structure and dielectric properties in the radio frequency range of polymer composites based on vanadium dioxide

    Directory of Open Access Journals (Sweden)

    Kolbunov V.R.

    2015-06-01

    Full Text Available Polymer composites with active fillers are recently considered to be promising materials for the design of new functional devices with controllable properties and are intensively investigated. Dielectric studies are one of the most effective methods for studying structural features and mechanisms of conductivity formation for this type of two-component systems. The paper presents research results of the dielectric characteristics in the range of radio frequency of 50 kHz — 10 MHz and temperature range of 30—60°C of polyethylene composites of vanadium dioxide with different volume fractions of filler. Two dispersion areas were found: a high-frequency area caused by the Maxwell charge separation on the boundaries of the polyethylene matrix — conductive filler of VI2 crystallites, and a low frequency area associated with the presence of the transition layer at this boundary. The relative permittivity of the composite has a tendency to a decrease in absolute value with increasing temperature. The analysis of the low-frequency dependence of the dielectric constant of the value of the filler’s volume fraction revealed that the investigated composite belongs to two-component statistical mixtures with a transition layer between the components.

  9. Cerium Dioxide Thin Films Using Spin Coating

    Directory of Open Access Journals (Sweden)

    D. Channei

    2013-01-01

    Full Text Available Cerium dioxide (CeO2 thin films with varying Ce concentrations (0.1 to 0.9 M, metal basis were deposited on soda-lime-silica glass substrates using spin coating. It was found that all films exhibited the cubic fluorite structure after annealing at 500°C for 5 h. The laser Raman microspectroscopy and GAXRD analyses revealed that increasing concentrations of Ce resulted in an increase in the degree of crystallinity. FIB and FESEM images confirmed the laser Raman and GAXRD analyses results owing to the predicted increase in film thickness with increasing Ce concentration. However, porosity and shrinkage (drying cracking of the films also increased significantly with increasing Ce concentrations. UV-VIS spectrophotometry data showed that the transmission of the films decreased with increasing Ce concentrations due to the increasing crack formation. Furthermore, a red shift was observed with increasing Ce concentrations, which resulted in a decrease in the optical indirect band gap.

  10. Influence of titanium and vanadium on the hydrogen transport through amorphous alumina films

    Energy Technology Data Exchange (ETDEWEB)

    Palsson, G.K. [Department of Physics, Uppsala University, Box 530, S-751 21 Uppsala (Sweden); Wang, Y.T. [Department of Physics, Uppsala University, Box 530, S-751 21 Uppsala (Sweden); Azofeifa, D. [Centro de Investigacion en Ciencia e Ingenieria de Materiales and Escuela de Fisica, Universidad de Costa Rica, San Jose (Costa Rica); Raanaei, H. [Department of Physics, Uppsala University, Box 530, S-751 21 Uppsala (Sweden); Department of Physics, Persian Gulf University, Bushehr 75168 (Iran, Islamic Republic of); Sahlberg, M. [Department of Materials Chemistry, Uppsala University, Box 538, S-751 21 Uppsala (Sweden); Hjoervarsson, B. [Department of Physics, Uppsala University, Box 530, S-751 21 Uppsala (Sweden)

    2010-04-02

    The influence of titanium and vanadium on the hydrogen transport rate through thin amorphous alumina films is addressed. Only small changes in the transport rate are observed when the Al{sub 2}O{sub 3} are covered with titanium or vanadium. This is in stark contrast to results with a Pd overlayer, which enhances the transport by an order of magnitude. Similarly, when titanium is embedded into the alumina the transport rate is faster than for the covered case but still slower than the undoped reference. Embedding vanadium in the alumina does not yield an increase in uptake rate compared to the vanadium covered oxide layers. These results add to the understanding of the hydrogen uptake of oxidized metals, especially the alanates, where the addition of titanium has been found to significantly enhance the rate of hydrogen uptake. The current findings eliminate two possible routes for the catalysis of alanates by Ti, namely dissociation and effective diffusion short-cuts formed by Ti. Finally, no photocatalytic enhancement was noticed on the titanium covered samples.

  11. Stage-by-stage modeling of the mechanism of semiconductor–metal phase transition in vanadium dioxide

    Directory of Open Access Journals (Sweden)

    Aleksander V. Il'inskiy

    2017-10-01

    Full Text Available The algorithm of stage-by-stage qualitative modeling of the mechanism of a semiconductor–metal phase transition in vanadium dioxide has been proposed. The basis for the model is a statement that the transition is complex in character and consists of the anhysteretic, purely electronic Моtt transition occurring over a wide temperature range, and the temperature-abrupt structural Peierls transition having a thermal hysteresis. The initial stage of the model is based on the solution of a quantum-mechanical problem of an electronic spectrum of a linear vanadium-ion's chain. The model is completed by consideration of correlation effects and a martensitic character of the structural transition through taking consecutively account of results obtained by X-ray, spectroscopic, impedansmetric and magnetic resonance methods.

  12. One-Dimensional Vanadium Dioxide Nanostructures for Room Temperature Hydrogen Sensors

    Directory of Open Access Journals (Sweden)

    Aline Simo

    2015-06-01

    Full Text Available In relation to hydrogen (H2 economy in general and gas sensing in particular, an extensive set of one dimensional (1-D nano-scaled oxide materials are being investigated as ideal candidates for potential gas sensing applications. This is correlated to their set of singular surface characteristics, shape anisotropy and readiness for integrated devices. Nanostructures of well- established gas sensing materials such as Tin Oxide (SnO2, Zinc Oxide (ZnO, Indium (III Oxide (In2O3, and Tungsten Trioxide (WO3 have shown higher sensitivity and gas selectivity, quicker response, faster time recovery, as well as an enhanced capability to detect gases at low concentrations. While the overall sensing characteristics of these so called 1-D nanomaterials are superior, they are efficient at high temperature; generally above 200 0C. This operational impediment results in device complexities in integration that limit their technological applications, specifically in their miniaturized arrangements. Unfortunately, for room temperature applications, there is a necessity to dope the above mentioned nano-scaled oxides with noble metals such as Platinum (Pt, Palladium (Pd, Gold (Au, Ruthenium (Ru. This comes at a cost. This communication reports, for the first time, on the room temperature enhanced H2 sensing properties of a specific phase of pure Vanadium Dioxide (VO2 phase A in their nanobelt form. The relatively observed large H2 room temperature sensing in this Mott type specific oxide seems to reach values as low as 14 ppm H2 which makes it an ideal gas sensing in H2 fuelled systems.

  13. Giant extrinsic negative thermal expansion in vanadium pentoxide nanocrystalline films

    Energy Technology Data Exchange (ETDEWEB)

    Bahgat, A.A. [Department of Physics, Faculty of Science, King Khaled University, P.O. Box 9004, Abha (Saudi Arabia); Department of Physics, Faculty of Science, Al-Azhar University, Nasr City 11884, Cairo (Egypt); Al-Hajry, A. [Department of Physics, Faculty of Science, King Khaled University, P.O. Box 9004, Abha (Saudi Arabia); El-Desoky, M.M. [Department of Physics, Faculty of Science, King Khaled University, P.O. Box 9004, Abha (Saudi Arabia); Department of Physics, Faculty of Education, Suez Canal University, Al-Arish (Egypt)

    2006-06-15

    Vanadium pentoxide gels, V{sub 2}O{sub 5}.1.6H{sub 2}O, give rise to xerogel layers that exhibit a preferred orientation. X-ray diffraction of this xerogel displays the 00l peaks typical of a turbostratic stacking of the V{sub 2}O{sub 5} ribbons along a direction parallel to the substrate. The distance along the c-axis is observed from the interlayer spacing to decrease continuously with increasing temperature up to 180 C, as observed by high-temperature X-ray diffraction. This contraction may be described by an extrinsic mechanism of negative thermal expansion (NTE). The coefficient of NTE as large as -1.5 x 10{sup -3} K{sup -1} was observed. Full recovery of the interlayer spacing is obtained after cooling the sample to room temperature in open air, where water molecules are reabsorbed, indicating that the process is reversible and the heating process can be repeated without losing NTE. The structure of the xerogel was explored further using differential scanning calorimetry as well as infrared spectroscopy. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. Reversible wetting of titanium dioxide films

    Science.gov (United States)

    Toh, A. G. G.; Nolan, M. G.; Cai, R.; Butler, D. L.

    2007-12-01

    Titanium dioxide (TiO II) films were rendered hydrophilic through ultraviolet (UV) light irradiation (254nm) and returned to their previous hydrophobic condition when exposed to a sealed pressurized nitrogen atmosphere. UV light irradiation on TiO II films resulted in super-hydrophilic surfaces with water contact angles of 40°. The switching of TiO II surface wettability could be repeated on the same surface with little hysteresis in water contact angle values. The mechanism behind the hydrophilic and hydrophobic reversal in TiO II surfaces is proposed to be due to UV light mediated photocatalysis and physio- adsorption of N II molecules respectively. The non-intrusive control of TiO II surface wettability could be an attractive alternative to other wettability-based microfluidic valving strategies like electrowetting and photochromic wetting variation. The above results are discussed in terms of the potential use of the films in wettability based valving and repeated wettability patterning of TiO II surfaces for open and sealed microfluidic systems.

  15. A tunable hybrid metamaterial absorber based on vanadium oxide films

    Science.gov (United States)

    Wen, Qi-Ye; Zhang, Huai-Wu; Yang, Qing-Hui; Chen, Zhi; Long, Yang; Jing, Yu-Lan; Lin, Yuan; Zhang, Pei-Xin

    2012-06-01

    A tunable hybrid metamaterial absorber (MA) in the microwave band was designed, fabricated and characterized. The hybrid MA was realized by incorporating a VO2 film into the conventional resonant MA. By thermally triggering the insulator-metal phase transition of the VO2 film, the impedance match condition was broken and a deep amplitude modulation of about 63.3% to the electromagnetic wave absorption was achieved. A moderate blue-shift of the resonance frequency was observed which is promising for practical applications. This VO2-based MA exhibits many advantages such as strong tunability, frequency agility, simple fabrication and ease of scaling to the terahertz band.

  16. Optical and electrical properties of vanadium pentoxide xerogel films: modification in electric field and the role of ion transport

    Energy Technology Data Exchange (ETDEWEB)

    Pergament, A.L.; Kazakova, E.L.; Stefanovich, G.B. [Petrozavodsk State University, Petrozavodsk (Russian Federation)

    2002-09-07

    Reversible modification of the optical and electrical properties of V{sub 2}O{sub 5}xnH{sub 2}O gel films under the action of an electric field is studied. It is shown that under cathodic polarization (I=10{sup -6}-10{sup -5} A, t{approx}10min, film thickness {approx}10 {mu}m), the films turn from brownish-yellow to red. This internal electrochromic (EC) effect is caused by the redistribution of hydrogen ions inside the film, instead of insertion from the outside (from an electrolyte). A local increase in the hydrogen concentration occurs near the cathode, and this in turn results in modification of the optical properties. The rise of transmittance in the long-wavelength region of the spectrum, as well as the shift of the absorption edge near h{nu}{approx}2.5eV towards longer wavelengths, is observed. In addition, according to the infrared data, some increase in water content also contributes to the process of colouration. The change in the optical properties is accompanied by a change in the electrical properties, namely, an increase in ionic conductivity from {approx}4x10{sup -5} to 10{sup -4}{omega}{sup -1} cm{sup -1}. At higher currents, electroforming resulting from the transport of oxygen ions occurs. This process leads to the formation of a channel consisting of vanadium dioxide due to reduction of V{sub 2}O{sub 5} to VO{sub 2}. Electrical switching with the S-type negative resistance, associated with an electrothermally driven metal-insulator transition in the channel, is observed in the sandwich M/V{sub 2}O{sub 5}xnH{sub 2}O/M devices (unlike the planar devices described in the literature). Finally, applied potentialities of these phenomena for micro- and opto-electronics (EC devices, sensors) are discussed. (author)

  17. Experiments on a strongly correlated material: photoresponse, phase diagram and hydrogen doping of vanadium dioxide

    Science.gov (United States)

    Kasirga, T. Serkan

    The metal-insulator transition (MIT) in vanadium dioxide (VO2) has attracted waves of attention after its rst observation by Morin in 1959. There are several reasons for the interest in this material. First, its metal-insulator transition is at an easily accessible temperature which allows investigators to study the eect of strong electronic correlations with little eort. Second reason is VO2 oers many applications, although most of them are mundane, a few may have signicant eects on dierent areas of technology. However, even after over half a century there is still a debate about the nature of the MIT and non of the applications proposed have been realized. The main culprit for this is the diculties in studying the bulk crystals of VO 2. In bulk crystals, defects in the crystal, impurities and domain structure causes irreproducible results. This combined with the theoretical challenges made studying VO2 and realization of applications impractical. However, recent discovery of the growth technique for growing the nano-scale crystals, revitalized the interest in VO2. In this dissertation I present the experimental studies that we performed on VO2. I discussed the ndings from three major studies we performed; photoresponse, finding the strain-temperature phase diagram and hydrogen doping of VO2. We used scanning photocurrent microscopy technique to reveal the light-matter interaction in VO2. Suspended nanobeam devices are used in the experiments and results revealed that photoresponse of VO2 is dominated by the thermal eects and there is no photovoltaic contribution. Results are published in Nature Nanotechnology in 2012 . In the second study, we determined the strain-temperature phase stability diagram of VO2. This is the first ever determination of the phase diagram of a solid state phase transition. Also our studies revealed that the triple point coincides with the critical point, which has important implications for both theoretical studies of the MIT in VO 2 and

  18. Monitoring the thin film formation during sputter deposition of vanadium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Kaufholz, Marthe, E-mail: marthe.kaufholz@kit.edu; Krause, Bärbel; Kotapati, Sunil; Köhl, Martin [ANKA/Institut für Photonenforschung und Synchrotronstrahlung, Karlsruher Institut für Technologie, Karlsruhe (Germany); Mantilla, Miguel F. [Max-Planck-Institut für Intelligente Systeme, Stuttgart (Germany); Stüber, Michael; Ulrich, Sven [Institut für Angewandte Materialien - Angewandte Werkstoffphysik, Karlsruher Institut für Technologie, Karlsruhe (Germany); Schneider, Reinhard; Gerthsen, Dagmar [Laboratorium für Elektronenmikroskopie, Karlsruher Institut für Technologie, Karlsruhe (Germany); Baumbach, Tilo [ANKA/Institut für Photonenforschung und Synchrotronstrahlung, Karlsruher Institut für Technologie, Karlsruhe (Germany)

    2015-01-01

    The theoretical description and the experimental realisation of in situ X-ray reflectivity measurements during thin film deposition of polycrystalline vanadium carbide coatings are presented. The thin film formation of magnetron sputtered polycrystalline coatings was monitored by in situ X-ray reflectivity measurements. The measured intensity was analyzed using the Parratt algorithm for time-dependent thin film systems. Guidelines for the on-line interpretation of the data were developed. For thick coatings, the experimental resolution needs to be included in the data evaluation in order to avoid misinterpretations. Based on a simple layer model, the time-dependent mean electron density, roughness and growth velocity were extracted from the data. As an example, the method was applied to the hard coating material vanadium carbide. Both instantaneous and slowly varying changes of the coating could be detected. It was shown that the growth velocity is proportional to the DC power. Significant changes of the microstructure induced by the working gas pressure are mainly driven by the chemical composition.

  19. Influence of doping on the properties of vanadium oxide gel films

    Energy Technology Data Exchange (ETDEWEB)

    Pergament, A L; Velichko, A A; Berezina, O Ya; Kazakova, E L; Kuldin, N A; Artyukhin, D V [Physics and Technology Department, Petrozavodsk State University, Petrozavodsk 185910 (Russian Federation)], E-mail: aperg@psu.karelia.ru

    2008-10-22

    The effect of doping with H and W on the properties of V{sub 2}O{sub 5} and VO{sub 2} derived from V{sub 2}O{sub 5} gel has been studied. It is shown that the treatment of V{sub 2}O{sub 5} in low-temperature RF hydrogen plasma for 1-10 min leads to either hydration of vanadium pentoxide or its reduction (depending on the treatment conditions) to lower vanadium oxides. For some samples, which are subject to plasma treatment in the discharge active zone, a non-ordinary temperature dependence of resistance, with a maximum at T{approx}100 K, is observed. For W-doped VO{sub 2} films, it is shown that substitution of V{sup 4+} with W{sup 6+} results in a decrease of the temperature of the metal-insulator transition. Also, it has been shown that the doping of initial films with {approx}3 at.% of W reduces the statistical scatter in the threshold parameters of the switching devices with S-shaped I-V characteristics on the basis of V{sub 2}O{sub 5} gel films. (fast track communication)

  20. Preparation of Sm doped cerium dioxide film by anodization

    Science.gov (United States)

    LIU, Xiaozhen; Yang, Junhua; Liu, Xiaozhou; Xia, Letian; Chen, Jie; Zhu, Ying

    2017-04-01

    The Sm doped cerium dioxide films were prepared with cerium foils as raw materials by anodization in Sm(NO3)3-Na2C2O4-NH3·H2O-H2O-(CH2OH)2 electrolyte. The anodic Sm doped cerium oxide film was heat treated at 550°C. The Sm doped cerium dioxide films were characterized with X-ray diffraction (XRD), energy-dispersive analyses of X-ray (EDAX), Fourier transform infrared (FTIR) techniques and scanning electron microcopy (SEM), respectively. The anodic Sm doped cerium oxide film is semi crystalline film. The heat treated anodic Sm doped cerium oxide film at 550°C has a structure of cubic fluorite. The doping of Sm is replacement doping or caulking doping. The Sm doped cerium dioxide film is porous film. The water, ethylene glycol and CO2 are adsorbed in the anodic Sm doped cerium oxide film. The adsorbing water, ethylene glycol and CO2 in the anodic Sm doped cerium oxide film are removed at 550°C. The Sm doped cerium dioxide film has strong absorption in the range of 1200 ~ 4000cm-1.

  1. The microstructures and electrical properties of Y-doped amorphous vanadium oxide thin films

    Science.gov (United States)

    Gu, Deen; Zhou, Xin; Guo, Rui; Wang, Zhihui; Jiang, Yadong

    2017-03-01

    One of promising approaches for further improving the sensitivity of microbolometer arrays with greatly-reduced pixel size is using the thermal-sensitive materials with higher performance. In this paper, Y-doped vanadium oxide (VOx) thin films prepared by a reactively sputtering process exhibit enhanced performance for the microbolometer application compared with frequently-applied VOx thin films. Both undoped and Y-doped VOx thin films are amorphous due to the relatively low deposition temperature. Y-doped VOx thin films exhibit smoother surface morphology than VOx due to the restrained expansion of particles during depositions. Y-doping increases the temperature coefficient of resistivity by over 20% for the doping level of 1.30 at%. The change rate of resistivity, after aging for 72 h, of thin films was reduced from about 15% for undoped VOx to 2% due to the introduction of Y. Moreover, Y-doped VOx thin films have a low 1/f noise level as VOx ones. Y-doping provides an attractive approach for preparing VOx thermal-sensitive materials with enhanced performance for microbolometers.

  2. dc leakage behavior in vanadium-doped bismuth titanate thin films

    Science.gov (United States)

    Chaudhuri, Ayan Roy; Krupanidhi, S. B.

    2005-11-01

    The dc leakage current behavior and its thickness dependence in vanadium-doped bismuth titanate thin films have been investigated over a wide range of temperatures. The leakage current behavior was explained on the basis of space-charge-limited conduction theory. The current density, calculated from the I-V characteristics, was found to be 2.01×10-9 A/cm2 at an applied field of 2.9 KV/cm at room temperature. Three distinct regions were observed in the I-V plot which were attributed to the Ohmic region, trap-filled limit, and Child's law. The influence of the film thickness on the dc leakage current conduction was found to be matching with that predicted by Lampert's theory [Phys. Rev. 103, 1648 (1956)] of space-charge-limited conduction.

  3. Fast imaging of laser induced plasma emission of vanadium dioxide (VO2) target

    CSIR Research Space (South Africa)

    Masina, BN

    2013-10-01

    Full Text Available The main objective of this study is to fully optimise the synthesis of vanadium oxide nanostructures using pulsed laser deposition. We will attempt to realise this by studying the mechanism of the plasma formation and expansion during the pulsed...

  4. Effects of twin boundaries in vanadium nitride films subjected to tensile/compressive deformations

    Science.gov (United States)

    Fu, Tao; Peng, Xianghe; Huang, Cheng; Zhao, Yinbo; Weng, Shayuan; Chen, Xiang; Hu, Ning

    2017-12-01

    Two kinds of atoms can serve as the twin boundary (TB) atoms in a transition metal nitride (TMN). In this work, we performed molecular dynamics (MD) simulations for the responses of vanadium nitride (VN) films with different kinds of TB atoms (V or N) subjected to uniaxial tensile/compressive deformations, to investigate their effects and the tensile-compressive asymmetry. In compressive deformation, the migration of TBs with V atoms to that with N atoms contributes to softening, while the pile-up of dislocations at TBs contributes to strengthening. During tension, fractures occur at the TBs without distinct nucleation of dislocations, the nature of the brittle fracture, which does not result in any improvement of fracture toughness and critical stress. Different frictional effects, cutoff radii, asymmetrical tensile and compressive nature of the interatomic potential and different deformation mechanisms are responsible for the tension-compression asymmetry in VN.

  5. Influence of Na diffusion on thermochromism of vanadium oxide films and suppression through mixed-alkali effect

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Mark J.; Wang, Junlan, E-mail: junlan@u.washington.edu

    2015-10-15

    Highlights: • Vanadium oxide films were reactively sputtered on three types of glass substrates. • Na diffusion from soda-lime glass undesirably inhibited thermochromism. • Na diffusion was suppressed by replacing half of sodium in glass with potassium. • Mixed-alkali effect promotes thermochromic VO{sub 2} films on glass substrates. - Abstract: Vanadium(IV) oxide possesses a reversible first-order phase transformation near 68 °C. Potential applications of the material include advanced optical devices and thermochromic smart windows. In this study, vanadium oxide films were grown on three types of glass substrates using reactive DC magnetron sputtering and were then annealed in air. The substrates were characterized with energy-dispersive X-ray spectroscopy, and the films were characterized with X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy, transmission electron microscopy, and UV-Vis-NIR spectrophotometry. The results show that the composition of the substrate has a major impact on the microstructure and optical properties of the deposited films. Sodium (Na) in the glass can undesirably inhibit thermochromism; however, replacing half of the Na with potassium (K) suppresses the Na diffusion and promotes the nucleation of pure VO{sub 2} with superior thermochromic functionality. The improved performance is attributed to the mixed-alkali effect between Na and K. These findings are both scientifically and technologically important since soda (Na{sub 2}O) is an essential flux material in glass products such as windows.

  6. Coupling Reactions of Carbon Dioxide with Epoxides Catalyzed by Vanadium Aminophenolate Complexes.

    Science.gov (United States)

    Elkurtehi, Ali I; Kerton, Francesca M

    2017-03-22

    A series of vanadium compounds supported by tetradentate aminobis(phenolate) ligands were screened for catalytic reactivity in the reaction of propylene oxide (PO) with CO2 : [VO(OMe)(O2 NOBuMeMeth )], [VO(OMe)(ON2 OBuMe )], [VO(OMe)(O2 NNBuBuPy )], and [VO(OMe)(O2 NOBuBuFurf )]. They showed similar reactivities, but reaction rates were higher for [VO(OMe)(ON2 OBuMe )], which was studied in more detail. Turnover frequencies for conversion of PO over 500 h-1 were observed. Activation energies were determined experimentally through in situ IR spectroscopy for propylene carbonate (48.2 kJ mol-1 ), styrene carbonate (45.6 kJ mol-1 ), and cyclohexene carbonate (54.7 kJ mol-1 ) formation. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Dehydrogenation of Isobutane with Carbon Dioxide over SBA-15-Supported Vanadium Oxide Catalysts

    Directory of Open Access Journals (Sweden)

    Chunling Wei

    2016-10-01

    Full Text Available A series of vanadia catalysts supported on SBA-15 (V/SBA with a vanadia (V content ranging from 1% to 11% were prepared by an incipient wetness method. Their catalytic behavior in the dehydrogenation of isobutane to isobutene with CO2 was examined. The catalysts were characterized by N2 adsorption, X-ray diffraction (XRD, scanning electron microscopy (SEM, Raman spectroscopy, and temperature-programmed reduction (TPR. It was found that these catalysts were effective for the dehydrogenation reaction, and the catalytic activity is correlated with the amount of dispersed vanadium species on the SBA-15 support. The 7% V/SBA catalyst shows the highest activity, which gives 40.8% isobutane conversion and 84.8% isobutene selectivity. The SBA-15-supported vanadia exhibits higher isobutane conversion and isobutene selectivity than the MCM-41-supported one.

  8. In situ X-Ray reflectivity measurements during DC sputtering of vanadium carbide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Kaufholz, Marthe; Krause, Baerbel; Kotapati, Sunil; Baumbach, Tilo [ISS, Karlsruher Institute for Technology (Germany); Ulrich, Sven; Stueber, Michael [IAM-AWP, Karlsruher Institute for Technology (Germany)

    2012-07-01

    Vanadium Carbide (VC) is a promising candidate for new hard coatings used e.g. in medical applications. For optimising the coating properties, the relation between the microstructure formation, deposition conditions and mechanical properties has to be understood. In situ X-Ray Reflectivity (XRR) is a powerful tool to investigate the changes in thickness, electron density and roughness during deposition. In situ XRR measurements during sputtering were performed at ANKA (MPI-Beamline). Several VC films were deposited on Si with different growth conditions. Before and after deposition a full specular XRR curve was taken. During sputtering, the intensity changes e.g. due to the thickness increase were measured at fixed angular position of the detector. For the analysis of the angle - and time-dependent XRR a simulation tool is used based on the Parratt Algorithm. This tool can be adapted to other materials and deposition techniques. First measurements show that the electron density of the thin films depends strongly on the plasma properties during the deposition. This might give the possibility of a controlled growth of layers with different electron density by tuning the plasma conditions.

  9. Amorphous and Crystalline Vanadium Oxides as High-Energy and High-Power Cathodes for Three-Dimensional Thin-Film Lithium Ion Batteries.

    Science.gov (United States)

    Mattelaer, Felix; Geryl, Kobe; Rampelberg, Geert; Dendooven, Jolien; Detavernier, Christophe

    2017-04-19

    Flexible wearable electronics and on-chip energy storage for wireless sensors drive rechargeable batteries toward thin-film lithium ion batteries. To enable more charge storage on a given surface, higher energy density materials are required, while faster energy storage and release can be obtained by going to thinner films. Vanadium oxides have been examined as cathodes in classical and thin-film lithium ion batteries for decades, but amorphous vanadium oxide thin films have been mostly discarded. Here, we investigate the use of atomic layer deposition, which enables electrode deposition on complex three-dimensional (3D) battery architectures, to obtain both amorphous and crystalline VO2 and V2O5, and we evaluate their thin-film cathode performance. Very high volumetric capacities are found, alongside excellent kinetics and good cycling stability. Better kinetics and higher volumetric capacities were observed for the amorphous vanadium oxides compared to their crystalline counterparts. The conformal deposition of these vanadium oxides on silicon micropillar structures is demonstrated. This study shows the promising potential of these atomic layer deposited vanadium oxides as cathodes for 3D all-solid-state thin-film lithium ion batteries.

  10. Thermo-electrical properties of composite semiconductor thin films composed of nanocrystalline graphene-vanadium oxides.

    Science.gov (United States)

    Jung, Hye-Mi; Um, Sukkee

    2014-12-01

    This paper presents an experimental comparative study involving the characterization of the thermo-electrical and structural properties of graphene-based vanadium oxide (graphene-VOx) composite thin films on insulating and conducting surfaces (i.e., fused quartz and acrylic resin-impregnated graphite) produced by a sol-gel process via dipping-pyrolysis. A combination of FE-SEM and XPS analyses revealed that the graphene-VOx composite thin films (coated onto fused quartz) exhibiting the microstructure of 2-graded nanowire arrays with a diameter of 40-80 nm were composed of graphene, a few residual oxygen-containing functional groups (i.e., C-O and C=O), and the VO2 Magnéli phase. The temperature-dependent electrical resistance measured on the as-deposited thin films clearly demonstrated that the graphene-VOx composite nanowire arrays thermally grown on fused quartz act as a semiconductor switch, with a transition temperature of 64.7 degrees C in the temperature range of -20 degrees C to 140 degrees C, resulting from the contributions of graphene and graphene oxides. In contrast, the graphene-VOx composite thin films deposited onto acrylic resin-impregnated graphite exhibit a superlinear semiconducting property of extremely low electrical resistance with negative temperature coefficients (i.e., approximately four orders of magnitude lower than that of the fused quartz), despite the similar microstructural and morphological characteristics. This difference is attributed to the synergistic effects of the paramagnetic metal feature of the tightly stacked nanowire arrays consisting of hexagonal V2O3 on the intrinsic electrical properties of the acrylic resin-impregnated graphite substrate, as revealed by FE-SEM, EDX, AFM, and XRD measurements. Although the thermo-sensitive electrical properties of the graphene-VOx composite thin films are very substrate specific, the applicability of graphene sheets can be considerably effective in the formation of highly planar arrays

  11. Structural and electrical properties of different vanadium oxide phases in thin film form synthesized using pulsed laser deposition

    Science.gov (United States)

    Majid, S. S.; Shukla, D. K.; Rahman, F.; Choudhary, R. J.; Phase, D. M.

    2015-06-01

    We present here the structural and electrical properties of the thin films of V2O3 (Vanadium sesquioxide) and V5O9. Both these oxide phases, V2O3 and V5O9, have beenachieved on (001) orientedSi substrate using the V2O5 target by optimizing the deposition parameters using pulsed laser deposition technique (PLD).Deposited films were characterized by X-ray diffraction(XRD)and four probe temperature dependent resistivity measurements. XRD studies reveal the V2O3 and V5O9 phases and the amount of strain present in both these films. The temperature dependency of electrical resistivity confirmed the characteristic metal-insulator transitions (MIT) for both the films, V2O3 and V5O9.

  12. Titanium dioxide thin films by atomic layer deposition: a review

    Science.gov (United States)

    Niemelä, Janne-Petteri; Marin, Giovanni; Karppinen, Maarit

    2017-09-01

    Within its rich phase diagram titanium dioxide is a truly multifunctional material with a property palette that has been shown to span from dielectric to transparent-conducting characteristics, in addition to the well-known catalytic properties. At the same time down-scaling of microelectronic devices has led to an explosive growth in research on atomic layer deposition (ALD) of a wide variety of frontier thin-film materials, among which TiO2 is one of the most popular ones. In this topical review we summarize the advances in research of ALD of titanium dioxide starting from the chemistries of the over 50 different deposition routes developed for TiO2 and the resultant structural characteristics of the films. We then continue with the doped ALD-TiO2 thin films from the perspective of dielectric, transparent-conductor and photocatalytic applications. Moreover, in order to cover the latest trends in the research field, both the variously constructed TiO2 nanostructures enabled by ALD and the Ti-based hybrid inorganic-organic films grown by the emerging ALD/MLD (combined atomic/molecular layer deposition) technique are discussed.

  13. Rf-sputtered vanadium oxide thin films: effect of oxygen partial pressure on structural and electrochemical properties

    CERN Document Server

    Park, Y J; Ryu, K S; Chang, S H; Park, S C; Yoon, S M; Kim, D K

    2001-01-01

    Vanadium oxide thin films with thickness of about 2000 A have been prepared by radio frequency sputter deposition using a V sub 2 O sub 5 target in a mixed argon and oxygen atmosphere with different Ar/O sub 2 ratio ranging from 99/1 to 90/10. X-ray diffraction and X-ray absorption near edge structure spectroscopic studies show that the oxygen content higher than 5% crystallizes a stoichiometric V sub O sub 5 phase, while oxygen deficient phase is formed in the lower oxygen content. The oxygen content in the mixed Ar + O sub 2 has a significant influence on electrochemical lithium insertion/deinsertion property. The discharge-charge capacity of vanadium oxide film increases with increasing the reactive oxygen content. The V sub O sub 5 film deposited at the Ar/O sub 2 ratio of 90/10 exhibits high discharge capacity of 100 mu Ah/cm sup 2 -mu m along with good cycle performance.

  14. Mesoscopic quantum effects in a bad metal, hydrogen-doped vanadium dioxide

    Science.gov (United States)

    Hardy, Will J.; Ji, Heng; Paik, Hanjong; Schlom, Darrell G.; Natelson, Douglas

    2017-05-01

    The standard treatment of quantum corrections to semiclassical electronic conduction assumes that charge carriers propagate many wavelengths between scattering events, and succeeds in explaining multiple phenomena (weak localization magnetoresistance (WLMR), universal conductance fluctuations, Aharonov-Bohm oscillations) observed in polycrystalline metals and doped semiconductors in various dimensionalities. We report apparent WLMR and conductance fluctuations in H x VO2, a poor metal (in violation of the Mott-Ioffe-Regel limit) stabilized by the suppression of the VO2 metal-insulator transition through atomic hydrogen doping. Epitaxial thin films, single-crystal nanobeams, and nanosheets show similar phenomenology, though the details of the apparent WLMR seem to depend on the combined effects of the strain environment and presumed doping level. Self-consistent quantitative analysis of the WLMR is challenging given this and the high resistivity of the material, since the quantitative expressions for WLMR are derived assuming good metallicity. These observations raise the issue of how to assess and analyze mesoscopic quantum effects in poor metals.

  15. Preparation and characterization of graphene-based vanadium oxide composite semiconducting films with horizontally aligned nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Hye-Mi; Um, Sukkee, E-mail: sukkeeum@hanyang.ac.kr

    2016-05-01

    Highly oriented crystalline hybrid thin films primarily consisting of Magnéli-phase VO{sub 2} and conductive graphene nanoplatelets are fabricated by a sol–gel process via dipping pyrolysis. A combination of chemical, microstructural, and electrical analyses reveals that graphene oxide (GO)-templated vanadium oxide (VO{sub x}) nanocomposite films exhibit a vertically stacked multi-lamellar nanostructure consisting of horizontally aligned vanadium oxide nanowire (VNW) arrays along the (hk0) set of planes on a GO template, with an average crystallite size of 41.4 Å and a crystallographic tensile strain of 0.83%. In addition, GO-derived VO{sub x} composite semiconducting films, which have an sp{sup 3}/sp{sup 2} bonding ratio of 0.862, display thermally induced electrical switching properties in the temperature range of − 20 °C to 140 °C, with a transition temperature of approximately 65 °C. We ascribe these results to the use of GO sheets, which serve as a morphological growth template as well as an electrochemically tunable platform for enhancing the charge-carrier mobility. Moreover, the experimental studies demonstrate that graphene-based Magnéli-phase VO{sub x} composite semiconducting films can be used in advanced thermo-sensitive smart sensing/switching applications because of their outstanding thermo-electrodynamic properties and high surface charge density induced by the planar-type VNWs. - Highlights: • VO{sub x}-graphene oxide composite (G/VO{sub x}) films were fabricated by sol–gel process. • The G/VO{sub x} films mainly consisted of Magnéli-phase VO{sub 2} and reduced graphene sheets. • The G/VO{sub x} films exhibited multi-lamellar textures with planar VO{sub x} nanowire arrays. • The G/VO{sub x} films showed the thermo-sensitive electrical switching properties. • Effects of GOs on the electrical characteristics of the G/VO{sub x} films were discussed.

  16. Vanadyl precursors used to modify the properties of vanadium oxide thin films obtained by chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Barreca, D.; Franzato, E.; Rizzi, G.A.; Tondello, E.; Vettori, U. [Univ. di Padova (Italy); Depero, L.E.; Sangaletti, L. [Univ. di Brescia (Italy). Dipt. di Chimica e Fisica per i Materiali

    1999-02-01

    Vanadium oxide thin films were prepared by chemical vapor deposition using as precursors a series of vanadyl complexes of general formula VO(L){sub 2}(H), where L is a {beta}-diketonate ligand. The depositions were carried out on {alpha}-Al{sub 2}O{sub 3} substrates in O{sub 2}, N{sub 2}, and N{sub 2} + H{sub 2}O atmospheres. In order to elucidate the role played by different ligands and synthesis conditions on the properties of the obtained films, the chemical composition of the samples was investigated by X-ray photoelectron spectroscopy, while their microstructure and surface morphology were analyzed by X-ray diffraction, Raman and atomic force microscopy. The thermal decomposition of the precursors, with particular attention to their reactivity in the presence of water vapor, was studied by mass spectrometry and Fourier transform infrared spectroscopy.

  17. Effects of the d-donor level of vanadium on the properties of Zn{sub 1−x}V{sub x}O films

    Energy Technology Data Exchange (ETDEWEB)

    García-Hemme, E., E-mail: eric.garcia@ucm.es [Dpto. de Física Aplicada III (Electricidad y Electrónica), Univ. Complutense de Madrid, Madrid 28040 (Spain); CEI Campus Moncloa, UCM-UPM, Madrid 28040 (Spain); Materials Sciences Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720 (United States); Yu, K. M. [Materials Sciences Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720 (United States); Department of Physics and Materials Science, City University of Hong Kong, Kowloon (Hong Kong); Wahnon, P. [CEI Campus Moncloa, UCM-UPM, Madrid 28040 (Spain); Instituto de Energía Solar and Depto TFB, E.T.S.I. Telecomunicación, Univ. Politécnica de Madrid, Ciudad Universitaria, Madrid 28040 (Spain); González-Díaz, G. [Dpto. de Física Aplicada III (Electricidad y Electrónica), Univ. Complutense de Madrid, Madrid 28040 (Spain); CEI Campus Moncloa, UCM-UPM, Madrid 28040 (Spain); Walukiewicz, W. [Materials Sciences Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720 (United States)

    2015-05-04

    We report the effect of d-levels of vanadium atoms on the electronic band structure of ZnO. Polycrystalline layers of Zn{sub 1−x}V{sub x}O with 0 ≤ x ≤ 0.08 were synthesized using magnetron sputtering technique. Electrical measurements show that electron concentration increases with vanadium up to x = 0.04 and then decreases and films become insulating for x > 0.06. Optical characterization reveals that the absorption edge shifts to higher energy, while the photoluminescence (PL) peak shows a shift to lower energy with increasing vanadium content. This unusual optical behavior can be explained by an anticrossing interaction between the vanadium d-levels and the conduction band (CB) of ZnO. The interaction results in an upward shift of unoccupied CB (E{sub +}) and the downward shift of the fully occupied E{sub −} band derived from the vanadium d-levels. The composition dependence of optical absorption edge (E{sub +}) and PL peak (E{sub −}) can be fitted using the Band Anticrossing model with the vanadium d-level located at 0.13 eV below CB of ZnO and a coupling constant of 0.65 eV.

  18. Influence of oxygen flow rate on metal-insulator transition of vanadium oxide thin films grown by RF magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Xu; Liu, Xinkun; Li, Haizhu; Huang, Mingju [Henan University, Key Lab of Informational Opto-Electronical Materials and Apparatus, School of Physics and Electronics, Kaifeng (China); Zhang, Angran [South China Normal University, Institute of Electronic Paper Displays, South China Academy of Advanced Optoelectronics, Guangzhou (China)

    2017-03-15

    High-quality vanadium oxide (VO{sub 2}) films have been fabricated on Si (111) substrates by radio frequency (RF) magnetron sputtering deposition method. The sheet resistance of VO{sub 2} has a significant change (close to 5 orders of magnitude) in the process of the metal-insulator phase transition (MIT). The field emission-scanning electron microscope (FE-SEM) results show the grain size of VO{sub 2} thin films is larger with the increase of oxygen flow. The X-ray diffraction (XRD) results indicate the thin films fabricated at different oxygen flow rates grow along the (011) crystalline orientation. As the oxygen flow rate increases from 3 sccm to 6 sccm, the phase transition temperature of the films reduces from 341 to 320 K, the width of the thermal hysteresis loop decreases from 32 to 9 K. The thin films fabricated in the condition of 5 sccm have a high temperature coefficient of resistance (TCR) -3.455%/K with a small resistivity of 2.795 ρ/Ω cm. (orig.)

  19. Sol-gel synthesis and XPS study of vanadium-hydroquinone oxide bronze films

    Energy Technology Data Exchange (ETDEWEB)

    Bondarenka, V. [Semiconductor Physics Institute, A. Gostauto 11, 01108 Vilnius (Lithuania); Vilnius Pedagogical University, Studentu 39, 08106 Vilnius (Lithuania); Tvardauskas, H.; Grebinskij, S.; Senulis, M.; Pasiskevicius, A. [Semiconductor Physics Institute, A. Gostauto 11, 01108 Vilnius (Lithuania); Volkov, V.; Zakharova, G. [Institute of Solid State Chemistry, Pervomaiskaia 91, 620219 Yekaterinburg (Russian Federation)

    2009-12-15

    A vanadium - hydroquinone oxide bronze has been synthesized by using a sol gel technology. The V{sub 2}O{sub 5} powder, hydrogen peroxide, and hydroquinone C{sub 6}H{sub 4}(OH){sub 2} were used as the starting materials to produce the bronze. At first the vanadium gel was made by the dissolving of vanadium pentoxide powder in hydrogen peroxide at 273 K. Then the solution was heated up to 350 K for the dissociation of peroxide complexes. An aqueous solution of hydroquinone was mixed with the formed gel in molar ratio 0.33:1. In this way the V{sub 2}O{sub 5{+-}}{sub {delta}}.nH{sub 2}O/HQ (HQ-hydroquinone) gel was synthesized. These gels are applied on the Ni pad and dried in an air (wet gel synthesis) or heated up to 580 K in air for 1 h for the water removal from gel (bronze production). The wet gel, as well as a bronze, was investigated by means of XPS method. Analysis of V-O region of XPS spectra shows that vanadium in both cases (wet gel and bronze) is in stable V{sup 5+} state. Oxygen in wet gel can be associated with V ions, hydroxide group and water. In bronze oxygen is connected with V and hydrogen (hydroxide). (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. Annealing effects on the structural and optical properties of vanadium oxide film obtained by the hot-filament metal oxide deposition technique (HFMOD)

    Energy Technology Data Exchange (ETDEWEB)

    Scarminio, Jair; Silva, Paulo Rogerio Catarini da, E-mail: scarmini@uel.br, E-mail: prcsilva@uel.br [Universidade Estadual de Londrina (UEL), PR (Brazil). Departamento de Fisica; Gelamo, Rogerio Valentim, E-mail: rogelamo@gmail.com [Universidade Federal do Triangulo Mineiro (UFTM), Uberaba, MG (Brazil); Moraes, Mario Antonio Bica de, E-mail: bmoraes@mailhost.ifi.unicamp.br [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2017-01-15

    Vanadium oxide films amorphous, nonstoichiometric and highly absorbing in the optical region were deposited on ITO-coated glass and on silicon substrates, by the hot-filament metal oxide deposition technique (HFMOD) and oxidized by ex-situ annealing in a furnace at 200, 300, 400 and 500 deg C, under an atmosphere of argon and rarefied oxygen. X-ray diffraction, Raman and Rutherford backscattering spectroscopy as well as optical transmission were employed to characterize the amorphous and annealed films. When annealed at 200 and 300 deg C the as-deposited opaque films become transparent but still amorphous. Under treatments at 400 and 500 deg C a crystalline nonstoichiometric V{sub 2}O{sub 5} structure is formed. All the annealed films became semiconducting, with their optical absorption coefficients changing with the annealing temperature. An optical gap of 2.25 eV was measured for the films annealed at 400 and 500 deg C. The annealing in rarefied oxygen atmosphere proved to be a useful and simple ex-situ method to modulate the structural and optical properties of vanadium oxide films deposited by HFMOD technique. This technique could be applied to other amorphous and non-absorbing oxide films, replacing the conventional and sometimes expensive method of modulate desirable film properties by controlling the film deposition parameters. Even more, the HFMOD technique can be an inexpensive alternative to deposit metal oxide films. (author)

  1. Linking Precursor Alterations to Nanoscale Structure and Optical Transparency in Polymer Assisted Fast-Rate Dip-Coating of Vanadium Oxide Thin Films

    Science.gov (United States)

    Glynn, Colm; Creedon, Donal; Geaney, Hugh; Armstrong, Eileen; Collins, Timothy; Morris, Michael A.; Dwyer, Colm O.'

    2015-06-01

    Solution processed metal oxide thin films are important for modern optoelectronic devices ranging from thin film transistors to photovoltaics and for functional optical coatings. Solution processed techniques such as dip-coating, allow thin films to be rapidly deposited over a large range of surfaces including curved, flexible or plastic substrates without extensive processing of comparative vapour or physical deposition methods. To increase the effectiveness and versatility of dip-coated thin films, alterations to commonly used precursors can be made that facilitate controlled thin film deposition. The effects of polymer assisted deposition and changes in solvent-alkoxide dilution on the morphology, structure, optoelectronic properties and crystallinity of vanadium pentoxide thin films was studied using a dip-coating method using a substrate withdrawal speed within the fast-rate draining regime. The formation of sub-100 nm thin films could be achieved rapidly from dilute alkoxide based precursor solutions with high optical transmission in the visible, linked to the phase and film structure. The effects of the polymer addition was shown to change the crystallized vanadium pentoxide thin films from a granular surface structure to a polycrystalline structure composed of a high density of smaller in-plane grains, resulting in a uniform surface morphology with lower thickness and roughness.

  2. Linking Precursor Alterations to Nanoscale Structure and Optical Transparency in Polymer Assisted Fast-Rate Dip-Coating of Vanadium Oxide Thin Films

    Science.gov (United States)

    Glynn, Colm; Creedon, Donal; Geaney, Hugh; Armstrong, Eileen; Collins, Timothy; Morris, Michael A.; Dwyer, Colm O’

    2015-01-01

    Solution processed metal oxide thin films are important for modern optoelectronic devices ranging from thin film transistors to photovoltaics and for functional optical coatings. Solution processed techniques such as dip-coating, allow thin films to be rapidly deposited over a large range of surfaces including curved, flexible or plastic substrates without extensive processing of comparative vapour or physical deposition methods. To increase the effectiveness and versatility of dip-coated thin films, alterations to commonly used precursors can be made that facilitate controlled thin film deposition. The effects of polymer assisted deposition and changes in solvent-alkoxide dilution on the morphology, structure, optoelectronic properties and crystallinity of vanadium pentoxide thin films was studied using a dip-coating method using a substrate withdrawal speed within the fast-rate draining regime. The formation of sub-100 nm thin films could be achieved rapidly from dilute alkoxide based precursor solutions with high optical transmission in the visible, linked to the phase and film structure. The effects of the polymer addition was shown to change the crystallized vanadium pentoxide thin films from a granular surface structure to a polycrystalline structure composed of a high density of smaller in-plane grains, resulting in a uniform surface morphology with lower thickness and roughness. PMID:26123117

  3. Electro-optical evaluation of tungsten oxide and vanadium pentoxide thin films for modeling an electrochromic device

    Directory of Open Access Journals (Sweden)

    H Najafi Ashtiani

    2015-01-01

    Full Text Available In this study, tungsten oxide and vanadium oxide electrochromic thin films were placed in vacuum and in a thickness of 200 nm on a transparent conductive substrate of SnO2:F using the physical method of thermal evaporation. Then they were studied for the optical characteristics in the wavelength range from 400 to 700 nm and for their electrical potentials in the range form +1.5 to -1.5 volts. The films were post heated in order to assess changes in energy gap with temperature, at temperatures120 , 300 and 500°C. Refractive and extinction coefficients and the transition type of films in the visible light range and in the thickness of 200 nm were determined and measured. X-ray diffraction pattern and SEM images and cyclic Voltammetry of layers were also studied. The results of this study due to the deposition of layers, the layer thickness selected, the type of substrate, the range of annealing temperatures and selected electrolyte were in full compliance with the works of other researchers [1,2,3]. Therefore, these layers with features such as crystal structure, refractive and even extinction coefficients in the range of visible light, the appropriate response of chromic switch in the replication potential, good adhesion to the substrate, and the high amount of optical transmition and so on, prove useful to be used in an electrochromic device

  4. Integration and High-Temperature Characterization of Ferroelectric Vanadium-Doped Bismuth Titanate Thin Films on Silicon Carbide

    Science.gov (United States)

    Ekström, Mattias; Khartsev, Sergiy; Östling, Mikael; Zetterling, Carl-Mikael

    2017-07-01

    4H-SiC electronics can operate at high temperature (HT), e.g., 300°C to 500°C, for extended times. Systems using sensors and amplifiers that operate at HT would benefit from microcontrollers which can also operate at HT. Microcontrollers require nonvolatile memory (NVM) for computer programs. In this work, we demonstrate the possibility of integrating ferroelectric vanadium-doped bismuth titanate (BiTV) thin films on 4H-SiC for HT memory applications, with BiTV ferroelectric capacitors providing memory functionality. Film deposition was achieved by laser ablation on Pt (111)/TiO2/4H-SiC substrates, with magnetron-sputtered Pt used as bottom electrode and thermally evaporated Au as upper contacts. Film characterization by x-ray diffraction analysis revealed predominately (117) orientation. P- E hysteresis loops measured at room temperature showed maximum 2 P r of 48 μC/cm2, large enough for wide read margins. P- E loops were measurable up to 450°C, with losses limiting measurements above 450°C. The phase-transition temperature was determined to be about 660°C from the discontinuity in dielectric permittivity, close to what is achieved for ceramics. These BiTV ferroelectric capacitors demonstrate potential for use in HT NVM applications for SiC digital electronics.

  5. VUV photoabsorption spectroscopy of amorphous and crystalline sulphur dioxide films

    Science.gov (United States)

    Holtom, P. D.; Dawes, A.; Davis, M. P.; Webb, S. M.; Hoffmann, S. V.; Mukerji, R. J.; Mason, N. J.

    Sulphur dioxide, SO2 is one of the simplest sulphur compounds and has been observed widely in the interstellar medium and in the solar system. It has also been observed in the atmospheres of Venus and Io and on the surface of Europa. Gaseous sulphur dioxide has recently been observed for the first time in the extragalactic medium. (Martin et al 1979). Five SO2 transitions detected towards NGC 253 with a total column density of 7 x 1013 cm-1 have been reported. SO2 is also present on Io, in solid, liquid and gaseous form. For example solid phase SO2 was suggested as the source for the 4.05-4.08 μm feature of SO2 seen in the spectrum of Io (Smythe, Nelson & Nash 1979),(Fanale et al 1979). To date most studies of SO2 spectroscopy have been in the gaseous phase with only a few experiments reported on solid SO2. We have used the UV1 beam line on the ASTRID synchrotron based at the University of Aarhus in Denmark to measure the VUV spectrum of condensed phase SO2 over the range of 120 - 350 nm and in the temperature range of 25 - 80 K. (For a full description of our equipment see Dawes, Holtom & Mason 2003). In this poster we report the results of a detailed study of the spectroscopy of solid SO2 in the VUV and UV. At 25 K the VUV spectrum for a fast deposited film (2.8 μm/hr) suggests an amorphous ice layer is formed, in contrast a slow deposition (0.21 μ m/hr) suggests that a more crystalline ice is formed. Annealing (heating of the 25 K fast deposited ice) to 80 K revealed a phase change producing crystalline SO2 ice from the originally amorphous sample. Such spectroscopic features might be used to determine thermal histories of planetary ice. Further details will be presented at the conference.

  6. Titanium dioxide thin films, their structure and its effect on their photoactivity and photocatalytic properties

    Energy Technology Data Exchange (ETDEWEB)

    Kaeaeriaeinen, M.-L., E-mail: marja-leena.kaariainen@lut.f [ASTRaL, Lappeenranta University of Technology, Prikaatinkatu 3E, FI-50100 Mikkeli (Finland); Kaeaeriaeinen, T.O.; Cameron, D.C. [ASTRaL, Lappeenranta University of Technology, Prikaatinkatu 3E, FI-50100 Mikkeli (Finland)

    2009-10-30

    Atomic Layer Deposition has been used to deposit titanium dioxide thin films on soda-lime glass substrates. A series of films with thicknesses from 2.6 to 260 nm has been created and the film structure has been studied with X-ray diffraction. It has been observed that at a reaction temperature of 350 {sup o}C, titanium dioxide thin films initially grow as anatase but after a certain thickness, growth continues as rutile. The photoactivity and photocatalytic activity of the films have been found to reach their maximum at a film thickness of 15 nm. At this thickness, the film structure shows a small fraction of rutile crystallites in a largely anatase matrix indicating that both crystal phases are necessary for the maximum activity.

  7. Development of chlorine dioxide releasing film and its application in decontaminating fresh produce

    Science.gov (United States)

    A feasibility study was conducted to develop chlorine dioxide releasing packaging films for decontaminating fresh produce. Sodium chlorite and citric acid powder were incorporated into polylactic acid (PLA) polymer. Films made with different amount of PLA (100 & 300 mg), percentage of reactant (5-60...

  8. Fast response of sprayed vanadium pentoxide (V2O5) nanorods towards nitrogen dioxide (NO2) gas detection

    Science.gov (United States)

    Mane, A. A.; Suryawanshi, M. P.; Kim, J. H.; Moholkar, A. V.

    2017-05-01

    The V2O5 nanorods have been successfully spray deposited at optimized substrate temperature of 400 °C onto the glass substrates using vanadium trichloride (VCl3) solution of different concentrations. The effect of solution concentration on the physicochemical and NO2 gas sensing properties of sprayed V2O5 nanorods is studied at different operating temperatures and gas concentrations. The XRD study reveals the formation of V2O5 having an orthorhombic symmetry. The FE-SEM micrographs show the nanorods-like morphology of V2O5. The AFM micrographs exhibit a well covered granular surface topography. For direct allowed transition, the band gap energy values are found to be decreased from 2.45 eV to 2.42 eV. The nanorods deposited with 30 mM solution concentration shows the maximum response of 24.2% for 100 ppm NO2 gas concentration at an operating temperature of 200 °C with response and recovery times of 13 s and 140 s, respectively. Finally, the chemisorption mechanism of NO2 gas on the V2O5 nanorods is discussed.

  9. Titanium–vanadium oxide nanocomposite thin films: Synthesis, characterization and antibacterial activity

    Energy Technology Data Exchange (ETDEWEB)

    Wren, A.W.; Adams, B.M.; Pradhan, D.; Towler, M.R.; Mellott, N.P., E-mail: mellott@alfred.edu

    2014-04-01

    A sol–gel based deposition method was successfully developed to produce a series of crack-free, spatially homogeneous undoped/silver doped titania–vanadia oxide nanocomposite thin films. Thin films were characterized using Glancing Incidence X-ray Diffraction (GIXRD), X-ray Photoelectron Spectroscopy (XPS), and Ultraviolet Visible Spectroscopy (UV–Vis). It was determined via both XRD and XPS that when calcined at 450 °C the nanocomposite crystallinity was a function of sol composition. Additionally, it was determined via GIXRD that upon silver doping, silver was incorporated into the vanadia structure or present in silver oxide form in crystalline films. A red shift within the UV–Vis spectra was observed with an increase of vanadia concentration from 0 to 100% respectively. Antibacterial analysis conducted on Escherichia coli and Staphylococcus epidermidis demonstrated that films exposed to light showed greater antibacterial properties. - Highlights: • Nanocomposite crystallinity was a function of sol composition. • Silver was incorporated into the vanadia structure. • A red shift was observed with an increase of vanadia concentration. • Antibacterial analysis conducted on Escherichia coli and Staphylococcus epidermidis.

  10. Vanadium and molybdenum oxide thin films on Au(111). Growth and surface characterization

    Energy Technology Data Exchange (ETDEWEB)

    Guimond, Sebastien

    2009-06-04

    The growth and the surface structure of well-ordered V{sub 2}O{sub 3}, V{sub 2}O{sub 5} and MoO{sub 3} thin films have been investigated in this work. These films are seen as model systems for the study of elementary reaction steps occurring on vanadia and molybdena-based selective oxidation catalysts. It is shown that well-ordered V{sub 2}O{sub 3}(0001) thin films can be prepared on Au(111). The films are terminated by vanadyl groups which are not part of the V{sub 2}O{sub 3} bulk structure. Electron irradiation specifically removes the oxygen atoms of the vanadyl groups, resulting in a V-terminated surface. The fraction of removed vanadyl groups is controlled by the electron dose. Such surfaces constitute interesting models to probe the relative role of both the vanadyl groups and the undercoordinated V ions at the surface of vanadia catalysts. The growth of well-ordered V{sub 2}O{sub 5}(001) and MoO{sub 3}(010) thin films containing few point defects is reported here for the first time. These films were grown on Au(111) by oxidation under 50 mbar O{sub 2} in a dedicated high pressure cell. Contrary to some of the results found in the literature, the films are not easily reduced by annealing in UHV. This evidences the contribution of radiation and surface contamination in some of the reported thermal reduction experiments. The growth of ultrathin V{sub 2}O{sub 5} and MoO{sub 3} layers on Au(111) results in formation of interface-specific monolayer structures. These layers are coincidence lattices and they do not correspond to any known oxide bulk structure. They are assumed to be stabilized by electronic interaction with Au(111). Their formation illustrates the polymorphic character and the ease of coordination units rearrangement which are characteristic of both oxides. The formation of a second layer apparently precedes the growth of bulk-like crystallites for both oxides. This observation is at odds with a common assumption that crystals nucleate as soon as a

  11. Effect of carbon dioxide and temperature on passive film parametersof superduplex stainless steel

    Directory of Open Access Journals (Sweden)

    Emandro Vieira da Costa

    2013-01-01

    Full Text Available Superduplex stainless steel has been frequently employed in new sites of Brazilian Pre-Salt. In these environments, chloride concentration, temperature and carbon dioxide are normally present in higher levels than those at sea water at room temperature. In these conditions, it is expected that the passive films of stainless steel also show modifications. To better understand such modifications, samples of superduplex stainless steel UNS S32750 were submitted to electrochemical impedance measurements in brine media, at two temperatures and under presence/absence of carbon dioxide. The electrochemical impedance results were initially tested using the Kramers-Kronig transform and subsequently fitted by equivalent circuit employing constant phase elements - CPE. Moreover, to quantify the effect of each factor (temperature, chloride, carbon dioxide and microstructure on the equivalent circuit, their parameters were tested applying statistical analysis. Significant effect of carbon dioxide and temperature was found on related parameters of passive film for heat-treated samples.

  12. Chemical vapor deposition of high quality graphene films from carbon dioxide atmospheres.

    Science.gov (United States)

    Strudwick, Andrew James; Weber, Nils Eike; Schwab, Matthias Georg; Kettner, Michel; Weitz, R Thomas; Wünsch, Josef R; Müllen, Klaus; Sachdev, Hermann

    2015-01-27

    The realization of graphene-based, next-generation electronic applications essentially depends on a reproducible, large-scale production of graphene films via chemical vapor deposition (CVD). We demonstrate how key challenges such as uniformity and homogeneity of the copper metal substrate as well as the growth chemistry can be improved by the use of carbon dioxide and carbon dioxide enriched gas atmospheres. Our approach enables graphene film production protocols free of elemental hydrogen and provides graphene layers of superior quality compared to samples produced by conventional hydrogen/methane based CVD processes. The substrates and resulting graphene films were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Raman microscopy, sheet resistance and transport measurements. The superior quality of the as-grown graphene films on copper is indicated by Raman maps revealing average G band widths as low as 18 ± 8 cm(-1) at 514.5 nm excitation. In addition, high charge carrier mobilities of up to 1975 cm(2)/(V s) were observed for electrons in transferred films obtained from a carbon dioxide based growth protocol. The enhanced graphene film quality can be explained by the mild oxidation properties of carbon dioxide, which at high temperatures enables an uniform conditioning of the substrates by an efficient removal of pre-existing and emerging carbon impurities and a continuous suppression and in situ etching of carbon of lesser quality being co-deposited during the CVD growth.

  13. New SERS-active junction based on cerium dioxide facet dielectric films for biosensing

    Directory of Open Access Journals (Sweden)

    I. Kurochkin

    2014-10-01

    In this paper we investigated the possibility of the facet structures, based on cerium dioxide to further enhance the SERS signal. During the studies a new metamaterial was developed. The metamaterial is based on the facet cerium dioxide films and plasmonic nanoparticles that are immobilized on its surface. The new metamaterial provides additional SERS signal amplification factor of 211. Thus developed material offers the prospect of increasing the sensitivity and selectivity of biochemical and immunological analysis.

  14. Preparation and Characterization of Self-Assembled Manganese Dioxide Thin Films

    Directory of Open Access Journals (Sweden)

    Suh Cem Pang

    2011-01-01

    Full Text Available Thin films of manganese dioxide (MnO2 were prepared by self-assembly of MnO2 nanoparticles directly unto nickel-coated poly(ethylene terephthalate flexible films using the newly developed horizontal submersion process. The thickness of deposited thin films was controllable by the deposition duration. This horizontal submersion deposition process for thin-film deposition is relatively easy, simple, and cost effective. Effects of deposition duration and calcination temperatures on the microstructure and electrochemical properties of self-assembled MnO2 thin films were investigated. Optimized MnO2 thin films exhibited high charge capacity, good cycling reversibility, and stability in a mild aqueous electrolyte and are thus promising electrode materials for the fabrication of thin-film electrochemical capacitors.

  15. Structural and Redox Properties of Vanadium Complexes in Molten Salts of Interest for the Catalytic Oxidation of Sulfur Dioxide

    DEFF Research Database (Denmark)

    Boghosian, S.; Chrissanthopoulos, A.; Fehrmann, Rasmus

    2000-01-01

    Electronic absorption (UV/VIS) spectra have been obtained at 450 degrees C from V2O5-K2S2O7 molten mixtures in SO2 ( P-SO2 = 0 - 1.2 atm) gas atmospheres. The data are in agreement with the V-V reversible arrow V-IV equilibrium: (VO)(2)O(SO4)(4)(4-)(l) + SO2(g) - 2VO(SO4)(2)(2-)(l) + SO3(g). Sulfur...... dioxide does not coordinate to the V-V complex but starts significantly to coordinate to V-IV for P-SO2 > 0 4 atm in accordance with the equilibrium: VO(SO4)(2)(2-)(l) + SO2(g) reversible arrow VO(SO4)(2)SO22-(l). Furthermore, high temperature Raman spectroscopy has been used to establish the structural...

  16. Reusable photocatalytic titanium dioxide-cellulose nanofiber films

    Science.gov (United States)

    Alexandra Snyder; Zhenyu Bo; Robert Moon; Jean-Christophe Rochet; Lia. Stanciu

    2013-01-01

    Titanium dioxide (TiO2) is a well-studied photocatalyst that is known to break down organic molecules upon ultraviolet (UV) irradiation. Cellulose nanofibers (CNFs) act as an attractive matrix material for the suspension of photocatalytic particles due to their desirable mechanical and optical properties. In this work, TiO2...

  17. Chemical vapor deposition and characterization of titanium dioxide thin films

    Science.gov (United States)

    Gilmer, David Christopher

    1998-12-01

    The continued drive to decrease the size and increase the speed of micro-electronic Metal-Oxide-Semiconductor (MOS) devices is hampered by some of the properties of the SiOsb2 gate dielectric. This research has focused on the CVD of TiOsb2 thin films to replace SiOsb2 as the gate dielectric in MOS capacitors and transistors. The relationship of CVD parameters and post-deposition anneal treatments to the physical and electrical properties of thin films of TiOsb2 has been studied. Structural and electrical characterization of TiOsb2 films grown from the CVD precursors tetraisopropoxotitanium (IV) (TTIP) and TTIP plus Hsb2O is described in Chapter 3. Both types of deposition produced stoichiometric TiOsb2 films comprised of polycrystalline anatase, but the interface properties were dramatically degraded when water vapor was added. Films grown with TTIP in the presence of Hsb2O contained greater than 50% more hydrogen than films grown using only TTIP and the hydrogen content of films deposited in both wet and dry TTIP environments decreased sharply with a post deposition Osb2 anneal. A significant thickness variation of the dielectric constant was observed which could be explained by an interfacial oxide and the finite accumulation thickness. Fabricated TiOsb2 capacitors exhibited electrically equivalent SiOsb2 gate dielectric thicknesses and leakage current densities as low as 38, and 1×10sp{-8} Amp/cmsp2 respectively. Chapter 4 discusses the low temperature CVD of crystalline TiOsb2 thin films deposited using the precursor tetranitratotitanium (IV), TNT, which produces crystalline TiOsb2 films of the anatase phase in UHV-CVD at temperatures as low as 184sp°C. Fabricated TiOsb2 capacitors exhibited electrically equivalent SiOsb2 gate dielectric thicknesses and leakage current densities as low as 17, and 1×10sp{-8} Amp/cmsp2 respectively. Chapter 5 describes the results of a comparison of physical and electrical properties between TiOsb2 films grown via LPCVD using

  18. VANADIUM ALLOYS

    Science.gov (United States)

    Smith, K.F.; Van Thyne, R.J.

    1959-05-12

    This patent deals with vanadium based ternary alloys useful as fuel element jackets. According to the invention the ternary vanadium alloys, prepared in an arc furnace, contain from 2.5 to 15% by weight titanium and from 0.5 to 10% by weight niobium. Characteristics of these alloys are good thermal conductivity, low neutron capture cross section, good corrosion resistance, good welding and fabricating properties, low expansion coefficient, and high strength.

  19. Silicon Dioxide Thin Film Mediated Single Cell Nucleic Acid Isolation

    Science.gov (United States)

    Bogdanov, Evgeny; Dominova, Irina; Shusharina, Natalia; Botman, Stepan; Kasymov, Vitaliy; Patrushev, Maksim

    2013-01-01

    A limited amount of DNA extracted from single cells, and the development of single cell diagnostics make it necessary to create a new highly effective method for the single cells nucleic acids isolation. In this paper, we propose the DNA isolation method from biomaterials with limited DNA quantity in sample, and from samples with degradable DNA based on the use of solid-phase adsorbent silicon dioxide nanofilm deposited on the inner surface of PCR tube. PMID:23874571

  20. Substrate Effect on Optical Properties of Insulator-Metal Transition in VO2 Thin Films

    OpenAIRE

    Radue, E.; Crisman, E.; L. Wang; Kittiwatanakul, S.; Lu, J.; Wolf, S. A.; Wincheski, R.; Lukaszew, R. A.; Novikova, I.

    2012-01-01

    In this paper we used Raman spectroscopy to investigate the optical properties of vanadium dioxide (VO2) thin films during the thermally induced insulating to metallic phase transition. We observed a significant difference in transition temperature in similar VO2 films grown on quartz and sapphire substrates: the film grown on quartz displayed the phase transition at a lower temperature (Tc=50C) compared a film grown on sapphire (Tc=68C). We also investigated differences in the detected Raman...

  1. Development and characterization of multilayer films of polyaniline, titanium dioxide and CTAB for potential antimicrobial applications

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Emanuel Airton O.; Dionisio, Natália A.; Quelemes, Patrick V. [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Leal, Sergio Henrique [CCNH, UFABC, Santo André, SP 09210-170 (Brazil); Matos, José Milton E.; Filho, Edson C. Silva [Laboratório Interdisciplinar de Materiais Avançados, LIMAv, CCN, UFPI, Teresina, PI 64049-550 (Brazil); Bechtold, Ivan H. [Departamento de Física — UFSC, Florianópolis, SC 88040-900 (Brazil); Leite, José Roberto S.A. [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Eiras, Carla, E-mail: carla.eiras.ufpi@gmail.com [Núcleo de Pesquisa em Biodiversidade e Biotecnologia, BIOTEC, CMRV, UFPI, Parnaíba, PI 64202-020 (Brazil); Laboratório Interdisciplinar de Materiais Avançados, LIMAv, CCN, UFPI, Teresina, PI 64049-550 (Brazil)

    2014-02-01

    Composites prepared from polyaniline (PANI) and the ceramic technology of titanium dioxide (TiO{sub 2}) have been proposed, however, the interaction of these materials with greater control of molecular arrangement becomes attractive in order to achieve properties not previously described or yet the optimization of those already reported. Therefore, in this study, thin hybrid films made of polyaniline (PANI), a conductive polymer, and the technological ceramic, titanium dioxide (TiO{sub 2}), were prepared by the layer-by-layer (LbL) self-assembly technique. The films were characterized by cyclic voltammetry (CV), UV–VIS spectroscopy and atomic force microscopy (AFM). Aiming to improve the dispersion of the ceramic in the polymer matrix, the commercial surfactant, cetyl trimethylammonium bromide (CTAB), was used in the formation of the films. The best condition of deposition was found showing synergic interactions between the conjugated materials. The antibacterial activity of the PANI(TiO{sub 2})/CTAB films was studied and the obtained results suggest their use as antimicrobial coatings. - Highlights: • Nanocomposite films of PANI and TiO2 prepared by the LbL technique • Ceramic dispersion in PANI improved with CTAB for antimicrobial applications. • Optimized film deposition for synergic interactions of the conjugated materials • Antibacterial activity of the films suggests their use as antimicrobial coatings.

  2. Bactericidal activity of titanium dioxide ultraviolet-induced films

    Energy Technology Data Exchange (ETDEWEB)

    Pleskova, S.N., E-mail: pleskova@mail.ru [Laboratory of Biochemistry and Molecular Biology, Tomsk State University, ave. Lenina 36, Tomsk 634050 (Russian Federation); Golubeva, I.S., E-mail: golubmay@mail.ru [Institute of applied biotechnology of Nizhny Novgorod, Yablonevaya Street 22, Nizhny Novgorod 603093 (Russian Federation); Verevkin, Y.K., E-mail: verevkin@appl.sci-nnov.ru [Institute of applied physics of the Russian Academy of Science, Ul' yanov Street, 46, Nizhny Novgorod 603950 (Russian Federation)

    2016-02-01

    TiO{sub 2} films are used as a self-sterilization surface due to their property to form reactive oxygen species (ROS) when irradiated with ultraviolet light. These ROS attack bacteria and kill them. We present a new way to enhance the bactericidal activity of TiO{sub 2}-films: formation of nanopores on the surface by four-beam high-power laser irradiation. Such surfaces have significantly higher antibacterial activity as compared to conventional TiO{sub 2} surfaces after 15 and 60 min of UV irradiation. Study of the bacterial cell morphology by atomic force microscopy after 60 min irradiation showed that Staphylococcus aureus 956 and Escherichia coli 321–5 undergo significant morphological changes. S. aureus assume atypical elongated shapes after UV treatment alone and swollen forms with protrusions after UV treatment on TiO{sub 2} surface. E. coli exhibit oval or round forms after UV treatment alone, and round forms with small protrusions, and destroyed cells after incubation under UV on the TiO{sub 2} film. - Highlights: • Nanopores on the TiO{sub 2} surface enhance the bactericidal activity of films. • The bactericidal effect of TiO{sub 2} is strain-specific. • The bacterial morphology significantly changes after UV/TiO{sub 2} treatment.

  3. Influence of vanadium incorporation on the microstructure, mechanical and tribological properties of Nb–V–Si–N films deposited by reactive magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Ju, Hongbo; Xu, Junhua, E-mail: jhxu@just.edu.cn

    2015-09-15

    Composite Nb–V–Si–N films with various V contents (3.7–13.2 at.%) were deposited by reactive magnetron sputtering and the effects of V content on the microstructure, mechanical and tribological properties of Nb–V–Si–N films were investigated. The results revealed that a three-phase structure, consisting of face-centered cubic (fcc) Nb–V–Si–N, hexagonal close-packed (hcp) Nb–V–Si–N and amorphous Si{sub 3}N{sub 4}, co-exists in the Nb–V–Si–N films and the cubic phase is dominant. The hardness and critical load (L{sub c}) of Nb–V–Si–N films initially increased gradually and reached a summit, then decreased with the increasing V content in the films and the maximum values were 35 GPa and 9.8 N, respectively, at 6.4 at.% V. The combination of V into Nb–Si–N film led to the fracture toughness linearly increasing from 1.11 MPa·m{sup 1/2} at 3.7 at.% V to 1.67 MPa·m{sup 1/2} at 13.2 at.% V. At room temperature (RT), the average friction coefficient decreased from 0.80 at 3.7 at.% V to 0.55 at 13.2 at.% V for the Nb–V–Si–N films. The wear rate of Nb–V–Si–N films initially decreased and then increased after reaching a minimum value of about 6.35 × 10{sup −} {sup 7} mm{sup 3}/N·mm at 6.4 at.% V. As the rise of testing temperature from 200 °C to 600 °C, the average friction coefficient of Nb–V–Si–N films decreased with the increase of the testing temperature regardless of V content. However, the wear rate gradually increased for all films. The average friction coefficient and wear rate at RT and elevated temperatures were mainly influenced by the vanadium oxides with weakly bonded lattice planes. - Highlight: • Fcc-Nb–V–Si–N, hcp-Nb–V–Si–N and amorphous Si{sub 3}N{sub 4} co-existed in the films. • The amount of Si{sub 3}N{sub 4} decreased with increasing V content in the films. • Hardness of Nb–V–Si–N film (6.4 at.%) reached a maximum value of 35 GPa. • Addition of V led to the

  4. Optical properties of DC sputtered titanium dioxide/gold thin films

    Science.gov (United States)

    Sittishoktram, M.; Ketsombun, E.; Jutarosaga, T.

    2017-09-01

    Titanium dioxide (TiO2) thin films have been generally accepted as an important material in the fields of photocatalysis, photovoltaic and photochromic. The efficiency of TiO2 films as an active layer in various applications strongly depends on their optical properties. In this present study, the optical properties of sputtered TiO2 thin films were modified using nanoparticles gold (Au) underlayer. TiO2 thin films with 100 nm thicknesses were prepared by DC magnetron sputtering on gold coated glass substrates with the estimated thickness approximately 2, 6 and 10 nm. The deposited TiO2/Au films were characterized using UV-Vis spectroscopy and photoluminescence (PL) spectroscopy. The transmittance of TiO2/Au film in visible region decreased from 87% to 50% when thickness of gold underlayer increased from 0 to about 10 nm. In addition, energy gap of TiO2/Au film from Tauc’s plot decreased with the increase of the thickness of gold underlayer while the wavelength of peak emission spectra obtained from PL were found to be increased. The modified optical properties indicated the probability of light absorption which may lead to the increase in electron-hole pair generation in this composite film.

  5. Nitrogen doping in atomic layer deposition grown titanium dioxide films by using ammonium hydroxide

    Energy Technology Data Exchange (ETDEWEB)

    Kaeaeriaeinen, M.-L., E-mail: marja-leena.kaariainen@lut.fi; Cameron, D.C.

    2012-12-30

    Titanium dioxide films have been created by atomic layer deposition using titanium chloride as the metal source and a solution of ammonium hydroxide in water as oxidant. Ammonium hydroxide has been used as a source of nitrogen for doping and three thickness series have been deposited at 350 Degree-Sign C. A 15 nm anatase dominated film was found to possess the highest photocatalytic activity in all film series. Furthermore almost three times better photocatalytic activity was discovered in the doped series compared to undoped films. The doped films also had lower resistivity. The results from X-ray photoemission spectroscopy showed evidence for interstitial nitrogen in the titanium dioxide structure. Besides, there was a minor red shift observable in the thickest samples. In addition the film conductivity was discovered to increase with the feeding pressure of ammonium hydroxide in the oxidant precursor. This may indicate that nitrogen doping has caused the decrease in the resistivity and therefore has an impact as an enhanced photocatalytic activity. The hot probe test showed that all the anatase or anatase dominant films were p-type and all the rutile dominant films were n-type. The best photocatalytic activity was shown by anatase-dominant films containing a small amount of rutile. It may be that p-n-junctions are formed between p-type anatase and n-type rutile which cause carrier separation and slow down the recombination rate. The combination of nitrogen doping and p-n junction formation results in superior photocatalytic performance. - Highlights: Black-Right-Pointing-Pointer We found all N-doped and undoped anatase dominating films p-type. Black-Right-Pointing-Pointer We found all N-doped and undoped rutile dominating films n-type. Black-Right-Pointing-Pointer We propose that p-n junctions are formed in anatase-rutile mixture films. Black-Right-Pointing-Pointer We found that low level N-doping has increased TiO{sub 2} conductivity. Black

  6. Effect of heat treatment on the crystal structure and FTIR spectra of Sm doped cerium dioxide film

    Science.gov (United States)

    Liu, Xiaozhou; Liu, Xiaozhou; Xia, Letian; Chen, Jie; Wang, Xiaoyu

    2017-04-01

    The Sm doped cerium dioxide films were prepared with cerium foils as raw materials by anodization in Sm(NO3)3-Na2C2O4-NH3·H2O-H2O-(CH2OH)2 electrolyte. The anodic Sm doped cerium oxide films were heat treated in 100°C ~ 400°C. The heat treated anodic Sm doped cerium oxide films were characterized with X-ray diffraction (XRD) and Fourier transform infrared (FTIR) techniques respectively. The heat treated anodic Sm doped cerium oxide film at 100°C is the semi crystalline film. As heat treatment temperatures being in 200°C ~ 400°C, the heat treated anodic Sm doped cerium oxide films have a structure of cubic fluorite respectively. The doping of Sm can be achieved well by anodization method and be recognized as replacement doping or caulking doping. The crystal structure of Sm doped cerium dioxide films become more complete with the increase of heat treatment temperature in 200 ~ 400 °C. The doping of Sm can improve the crystallinity of the cerium dioxide film. The presence of adsorbing water, ethylene glycol and CO2 in the heat treated anodic Sm doped cerium oxide film at 100°C. The adsorbing ethylene glycols and water, CO2 in the anodic Sm doped cerium oxide film are removed at 200°C and 300°C respectively.

  7. Development of chlorine dioxide releasing film and its application in decontaminating fresh produce.

    Science.gov (United States)

    Ray, Soumi; Jin, Tony; Fan, Xuetong; Liu, Linshu; Yam, Kit L

    2013-02-01

    A feasibility study was conducted to develop chlorine dioxide (ClO(2) )-releasing packaging films for decontaminating fresh produce. Sodium chlorite and citric acid powder were incorporated into polylactic acid (PLA) polymer. Films made with different amounts of PLA (100 and 300 mg), percentages of reactant (5% to 60%), and ratios of sodium chlorite to citric acid (1:2 or 2:1) were prepared using a solvent casting method. The release of ClO(2) from the resultant films was activated by moisture. Increase of reactants in the films produced more ClO(2) while higher PLA content in the films resulted in less release of ClO(2) . The ratio of sodium chlorite to citric acid and activation temperature (22 °C compared with 10 °C) did not affect the ClO(2) release from the films. Antimicrobial efficacy of ClO(2) released from the films was evaluated using grape tomato as a model food. The results indicate that the films were activated by moisture from tomatoes in the package and the released ClO(2) reduced Salmonella spp. and Escherichia coli O157:H7 inoculated on the tomatoes to undetectable levels (units (CFU)/tomato), achieving more than 3 log reduction. The film-treated tomatoes did not show significant changes in color and texture as compared to controls during storage at 10 °C for 21 d. This study demonstrated the technical feasibility for development of gaseous ClO(2) -releasing packaging system to enhance microbial safety and extend shelf life of fresh produce. © 2013 Institute of Food Technologists®

  8. Electrical characteristics and hydrogen concentration of chemical vapor deposited silicon dioxide films: Effect of water treatment

    Science.gov (United States)

    Li, S. C.; Murarka, S. P.

    1992-11-01

    The effect of exposing chemical vapor deposited silicon dioxide directly to water has been investigated. Unlike the effect of the water-related traps in thermally grown silicon dioxide, the capacitance-voltage (C-V) shift due to diffused-in water molecules is directly observed without using the method of avalanche injection. The resonate nuclear reaction technique with 15N ion beam has been used to measure the hydrogen concentration of water-boiled, as-deposited, and rapid thermal-annealed silicon dioxide films. These depth profiles show that the hydrogen-containing species, that are most likely water molecules, diffuse in and out and redistribute in the as-deposited and rapid thermal-annealed films. These hydrogen depth profiles also indicate that the amount of diffused-in water molecules in the oxide is limited by the solubility of the water in the oxide. The solubility of water in the oxide annealed at high temperatures is found to be significantly lower than that in the as-deposited oxide. It is found that diffused-in water molecules, in order to satisfy the water solubility of the oxide, play a compensating role in controlling the oxide charges. Water molecules would continue to diffuse in, and interact with oxide charges and produce charges with reverse polarity that compensate the existing oxide charges until water solubility is satisfied.

  9. Trace vanadium analysis by catalytic adsorptive stripping voltammetry using mercury-coated micro-wire and polystyrene-coated bismuth film electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Dansby-Sparks, Royce; Chambers, James Q. [Department of Chemistry, University of Tennessee, Knoxville, TN 37996-1600 (United States); Xue Ziling, E-mail: xue@ion.chem.utk.edu [Department of Chemistry, University of Tennessee, Knoxville, TN 37996-1600 (United States)

    2009-06-08

    An electrochemical technique has been developed for ultra-trace (ng L{sup -1}) vanadium (V) measurement. Catalytic adsorptive stripping voltammetry for V analysis was developed at mercury-coated gold micro-wire electrodes (MWEs, 100 {mu}m) in the presence of gallic acid (GA) and bromate ion. A potential of -0.275 V (vs Ag/AgCl) was used to accumulate the complex in acetate buffer (pH 5.0) at the electrode surface followed by a differential pulse voltammetric scan. Parameters affecting the electrochemical response, including pH, concentration of GA and bromate, deposition potential and time have been optimized. Linear response was obtained in the 0-1000 ng L{sup -1} range (2 min deposition), with a detection limit of 0.88 ng L{sup -1}. The method was validated by comparison of results for an unknown solution of V by atomic absorption measurement. The protocol was evaluated in a real sample by measuring the amount of V in river water samples. Thick bismuth film electrodes with protective polystyrene films have also been made and evaluated as a mercury free alternative. However, ng L{sup -1} level detection was only attainable with extended (10 min) deposition times. The proposed use of MWEs for the detection of V is sensitive enough for future use to test V concentration in biological fluids treated by the advanced oxidation process (AOP).

  10. Investigation of polypyrrole/polyvinyl alcohol–titanium dioxide composite films for photo-catalytic applications

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Shaoqiang; Zhang, Hongyang; Song, Yuanqing; Zhang, Jianling; Yang, Haigang; Jiang, Long, E-mail: jianglong@scu.edu.cn; Dan, Yi, E-mail: danyichenweiwei@163.com

    2015-07-01

    Graphical abstract: - Highlights: • The study provides an easy and convenient method to fabricate films, which will give guidance for the preparation of three-dimensional materials. • The PPy/PVA–TiO{sub 2} films can keep better photo-catalytic activities both under UV and visible light irradiation when compared with TiO{sub 2} film. • There exist electron transfers between PPy/PVA and TiO{sub 2}. - Abstract: Polypyrrole/polyvinyl alcohol–titanium dioxide (PPy/PVA–TiO{sub 2}) composite films used as photo-catalysts were fabricated by combining TiO{sub 2} sol with PPy/PVA solution in which PPy was synthesized by in situ polymerization of pyrrole (Py) in polyvinyl alcohol (PVA) matrix and loaded on glass. The prepared photo-catalysts were investigated by X-ray diffraction (XRD), ultraviolet–visible diffuse reflection spectroscopy (UV–vis DRS), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectra and photoluminescence (PL). The results indicate that the composites have same crystal structure as the TiO{sub 2} and extend the optic absorption from UV region to visible light region. By detecting the variation ratio, detected by ultraviolet–vis spectroscopy, of model pollutant rhodamine B (RhB) solution in the presence of the composite films under both UV and visible light irradiation, the photo-catalytic performance of the composite films was investigated. The results show that the PPy/PVA–TiO{sub 2} composite films show better photo-catalytic properties than TiO{sub 2} film both under UV and visible light irradiation, and the photo-catalytic degradation of RhB follows the first-order kinetics. The effects of the composition of composite films and the concentration of RhB on the photo-catalytic performance, as well as the possible photo-catalytic mechanism, were also discussed. By photo-catalytic recycle experiments, the structure stability of the PPy/PVA–TiO{sub 2} composite film was investigated and the results show that

  11. Tunable removal rates of silicon dioxide, silicon nitride and polysilicon films during chemical mechanical polishing

    Science.gov (United States)

    Dandu, Veera P. R.

    Achieving a high Si3N4 removal rate and a relatively low SiO2 removal rate, which is challenging but promising for emerging applications for sub-32 nm node devices, was investigated. This was thought to be impossible as the removal of Si3N4 usually follows a two-step mechanism in which silicon nitride is hydrolyzed first and then removed during CMP. Therefore, additives normally used to suppress the SiO 2 removal rate would tend to suppress the S3N4 removal rate as well. However, it was shown that by using a specific type of a cationic polymer in ceria-based dispersions, a low SiO2 removal rate (FinFET fabrication, where a polysilicon layer has to be selectively polished/protected with respect to silicon dioxide and/or silicon nitride layers. Several dispersions were identified which yield tunable removal rates of polysilicon (from <2 nm/min to ˜1 microm/min), silicon dioxide (<2 nm/min to ˜500 nm/min) and silicon nitride (<2 nm/min to ˜120 nm/min) films. This has been made possible by using several additives in ceria and silica based dispersions with and without surface functionalization at different pH values. A fundamental investigation of the interaction of the additive(s) with the abrasives, SiO2 Si3N4, and polysilicon films was also carried out in order to elucidate the removal mechanisms. Zeta potential measurements, UV-Vis Spectroscopy, adsorption isotherms and thermo gravimetric analysis were performed to understand the adsorption behavior of these additives on abrasives and polishing films at different pH values. It was observed that the Ce3+ on the surface of the ceria abrasives is reacting with the silicon dioxide and suboxide on the silicon nitride surfaces during polishing. Also, it appears that electrostatic interactions in conjunction with the reactivity of the active sites on the surface of abrasives play a vital role in determining the removal rates of silicon dioxide, silicon nitride and polysilicon films.

  12. Fabrication and optimization of the thermally treated titanium dioxide thin film-based ultraviolet photodetectors

    Science.gov (United States)

    Kim, Sang Hun; Lee, Soo Hyun; Yu, Jae Su

    2018-01-01

    We reported the titanium dioxide (TiO2) thin film-based metal-semiconductor-metal (MSM) ultraviolet (UV) photodetectors (PDs), fabricated by conventional photolithography and electron-beam evaporation processes, with additional annealing. The crystallinity and morphology of the thermally treated TiO2 layers were investigated. In order to optimize the performance of MSM UV PDs, the annealing temperature (T a ) and electrode spacing were adjusted. The qualified anatase TiO2 thin films without structural deformation were obtained at the T a of 600 °C. At the bias of 5 V, the high on/off ratio of 6.0 × 105 was achieved from the device with the electrode spacing of 30 μm. By switching the light on/off, the device operation was also observed. The average rise and reset times were estimated to be 34.2 and 5.5 s, respectively.

  13. LPG ammonia and nitrogen dioxide gas sensing properties of nanostructured polypyrrole thin film

    Energy Technology Data Exchange (ETDEWEB)

    Bagul, Sagar B., E-mail: nano.sbbagul@gmail.com; Upadhye, Deepak S.; Sharma, Ramphal, E-mail: rps.phy@gmail.com [Thin Film and Nanotechnology Laboratory, Department of Nanotechnology, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad (India)

    2016-05-06

    Nanostructured Polypyrrole thin film was synthesized by easy and economic chemical oxidative polymerization technique on glass at room temperature. The prepared thin film of Polypyrrole was characterized by optical absorbance study by UV-visible spectroscopy and electrical study by I-V measurement system. The optical absorbance spectrum of Polypyrrole shows two fundamental peaks in region of 420 and 890 nm, which confirms the formation of Polypyrrole on glass substrate. The I-V graph of nanostructured Polypyrrole represents the Ohmic nature. Furthermore, the thin film of Polypyrrole was investigated by Scanning electron microscopy for surface morphology study. The SEM micrograph represents spherical nanostructured morphology of Polypyrrole on glass substrate. In order to investigate gas sensing properties, 100 ppm of LPG, Ammonia and Nitrogen Dioxide were injected in the gas chamber and magnitude of resistance has been recorded as a function of time in second. It was observed that nanostructured Polypyrrole thin film shows good sensing behavior at room temperature.

  14. A study of tin dioxide and antimony tetroxide supported vanadium oxide catalysts by solid-state 51V and 1H NMR techniques.

    Science.gov (United States)

    Reddy, B M; Mastikhin, V M

    1992-12-01

    A series of vanadia catalysts with various V2O5 loadings supported on SnO2 and alpha-Sb2O4 are investigated by the application of X-ray diffraction and solid-state 51V and 1H NMR techniques. XRD results show no evidence for the formation of a crystalline vanadia phase on both supports. However, the 51V NMR spectra of the catalysts reveal the existence of two types of vanadia species on the surface of the support: one due to a dispersed vanadia phase at lower vanadia loadings and the other due to a crystalline vanadia phase at higher vanadium content. The quantity of the dispersed vanadia phase, however, depends on the nature of the support material. The 1H NMR results provide evidence for the existence or non-existence of a metal oxide support interaction through the support surface hydroxyl groups.

  15. The Effect of Type and Concentration of Modifier in Supercritical Carbon Dioxide on Crystallization of Nanocrystalline Titania Thin Films.

    Czech Academy of Sciences Publication Activity Database

    Sajfrtová, Marie; Cerhová, Marie; Jandová, Věra; Dřínek, Vladislav; Daniš, E.; Matějová, L.

    2018-01-01

    Roč. 133 (2018), s. 211-217 ISSN 0896-8446 R&D Projects: GA ČR GA14-23274S Institutional support: RVO:67985858 Keywords : titania thin film * supercritical carbon dioxide * crystallization Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 2.991, year: 2016

  16. Tunable Electrical Properties of Vanadium Oxide by Hydrogen-Plasma-Treated Atomic Layer Deposition

    Directory of Open Access Journals (Sweden)

    Helen Hejin Park

    2017-04-01

    Full Text Available In this study, a plasma-modified process was developed to control the electrical properties of atomic layer deposition (ALD-grown vanadium dioxide (VO2, which is potentially useful for applications such as resistive switching devices, bolometers, and plasmonic metamaterials. By inserting a plasma pulse with varying H2 gas flow into each ALD cycle, the insulator-to-metal transition (IMT temperature of postdeposition-annealed crystalline VO2 films was adjusted from 63 to 78 °C. Film analyses indicate that the tunability may arise from changes in grain boundaries, morphology, and compositional variation despite hydrogen not remaining in the annealed VO2 films. This growth method, which enables a systematic variation of the electronic behavior of VO2, provides capabilities beyond those of the conventional thermal ALD and plasma-enhanced ALD.

  17. Carbon dioxide and water adsorption on highly epitaxial Delafossite CuFeO2 thin film

    Science.gov (United States)

    Rojas, S.; Joshi, T.; Borisov, P.; Sarabia, M.; Lederman, D.; Cabrera, A. L.

    2015-03-01

    Thermal programmed desorption (TPD) of CO2 and H2O from a 200 nm thick CuFeO2 Delafossite surface was performed in a standard UHV chamber, The CuFeO2 thin film grown using Pulsed Laser Deposition (PLD) over an Al2O3 (0001) substrate with controlled O2 atmosphere resulted with highly epitaxial crystal structure. The adsorption/desorption of CO2 and H2O process was also monitored with X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES). Our results revealed that carbon dioxide interacts with CuFeO2 forming Fe carbonates compounds on its surface. Hydroxides were also formed on the surface due to water presence. Using TPD data, Arrhenius plots for CO2 and water desorption were done and activation energy for desorption was obtained. Funds FONDECyT 1130372; Thanks to P. Ferrari.

  18. Effect of aging heat time and annealing temperature on the properties of nanocrystalline tin dioxide thin films

    Science.gov (United States)

    Kadhim, Imad H.; Abu Hassan, H.

    2017-04-01

    Nanocrystalline tin dioxide (SnO2) thin films have been successfully prepared by sol-gel spin-coating technique on p-type Si (100) substrates. A stable solution was prepared by mixing tin(II) chloride dihydrate, pure ethanol, and glycerin. Temperature affects the properties of SnO2 thin films, particularly the crystallite size where the crystallization of SnO2 with tetragonal rutile structure is achieved when thin films that prepared under different aging heat times are annealed at 400∘C. By increasing aging heat time in the presence of annealing temperatures the FESEM images indicated that the thickness of the fabricated film was directly proportional to solution viscosity, increasing from approximately 380 nm to 744 nm, as well as the crystallization of the thin films improved and reduced defects.

  19. Fast response of sprayed vanadium pentoxide (V{sub 2}O{sub 5}) nanorods towards nitrogen dioxide (NO{sub 2}) gas detection

    Energy Technology Data Exchange (ETDEWEB)

    Mane, A.A. [Thin Film Nanomaterials Laboratory, Department of Physics, Shivaji University, Kolhapur 416 004 (India); General Science and Humanities Department, Sant Gajanan Maharaj College of Engineering, Mahagaon, 416 503 (India); Suryawanshi, M.P. [Optoelectronics Convergence Research Center, Department of Materials Science and Engineering, Chonnam National University, 300, Yongbong-Dong, Buk-Gu, Gwangju 500-757 (Korea, Republic of); Kim, J.H., E-mail: jinhyeok@chonnam.ac.kr [Optoelectronics Convergence Research Center, Department of Materials Science and Engineering, Chonnam National University, 300, Yongbong-Dong, Buk-Gu, Gwangju 500-757 (Korea, Republic of); Moholkar, A.V., E-mail: avmoholkar@gmail.com [Thin Film Nanomaterials Laboratory, Department of Physics, Shivaji University, Kolhapur 416 004 (India)

    2017-05-01

    Highlights: • Effect of solution concentration on physicochemical properties of sprayed V{sub 2}O{sub 5} nanorods is studied. • Good response and short response-recovery times of V{sub 2}O{sub 5} nanorods towards NO{sub 2} gas show it is potential material for fabrication of NO{sub 2} sensor. • The chemisorption mechanism of NO{sub 2} gas on the V{sub 2}O{sub 5} nanorods is discussed. - Abstract: The V{sub 2}O{sub 5} nanorods have been successfully spray deposited at optimized substrate temperature of 400 °C onto the glass substrates using vanadium trichloride (VCl{sub 3}) solution of different concentrations. The effect of solution concentration on the physicochemical and NO{sub 2} gas sensing properties of sprayed V{sub 2}O{sub 5} nanorods is studied at different operating temperatures and gas concentrations. The XRD study reveals the formation of V{sub 2}O{sub 5} having an orthorhombic symmetry. The FE-SEM micrographs show the nanorods-like morphology of V{sub 2}O{sub 5}. The AFM micrographs exhibit a well covered granular surface topography. For direct allowed transition, the band gap energy values are found to be decreased from 2.45 eV to 2.42 eV. The nanorods deposited with 30 mM solution concentration shows the maximum response of 24.2% for 100 ppm NO{sub 2} gas concentration at an operating temperature of 200 °C with response and recovery times of 13 s and 140 s, respectively. Finally, the chemisorption mechanism of NO{sub 2} gas on the V{sub 2}O{sub 5} nanorods is discussed.

  20. Tin-dioxide nanocrystals as Er3+ luminescence sensitizers: Formation of glass-ceramic thin films and their characterization

    Science.gov (United States)

    Zur, Lidia; Tran, Lam Thi Ngoc; Meneghetti, Marcello; Tran, Van Thi Thanh; Lukowiak, Anna; Chiasera, Alessandro; Zonta, Daniele; Ferrari, Maurizio; Righini, Giancarlo C.

    2017-01-01

    Silica-tin dioxide thin films doped with Er3+ ions were fabricated and investigated. Different parameters such as heat-treatment temperatures, molar concentrations of SnO2 as well as Er3+ ions concentration were changed in order to obtain the best properties of presented thin films. Using several techniques, thin films were characterized and proved to be crack-free, water-free and smooth after a heat-treatment at 1200 °C. Aiming to application in optics, the transparency of thin films was also evidenced by transmission spectra. Based on the photoluminescence measurements, the mechanism of energy transfer from SnO2 nanocrystals to Er3+ ions was examined and discussed.

  1. Characterization and Electrochemical Performance at High Discharge Rates of Tin Dioxide Thin Films Synthesized by Atomic Layer Deposition

    Science.gov (United States)

    Maximov, M. Yu.; Novikov, P. A.; Nazarov, D. V.; Rymyantsev, A. M.; Silin, A. O.; Zhang, Y.; Popovich, A. A.

    2017-11-01

    In this study, thin films of tin dioxide have been synthesized on substrates of silicon and stainless steel by atomic layer deposition (ALD) with tetraethyl tin and by inductively coupled remote oxygen plasma as precursors. Studies of the surface morphology by scanning electron microscopy show a strong dependence on synthesis temperature. According to the x-ray photoelectron spectroscopy measurements, the samples contain tin in the oxidation state +4. The thickness of the thin films for electrochemical performance was approximately 80 nm. Electrochemical cycling in the voltage range of 0.01-0.8 V have shown that tin oxide has a stable discharge capacity of approximately 650 mAh/g during 400 charge/discharge cycles with an efficiency of approximately 99.5%. The decrease in capacity after 400 charge/discharge cycles was around 5-7%. Synthesized SnO2 thin films have fast kinetics of lithium ions intercalation and excellent discharge efficiency at high C-rates, up to 40C, with a small decrease in capacity of less than 20%. Specific capacity and cyclic stability of thin films of SnO2 synthesized by ALD exceed the values mentioned in the literature for pure tin dioxide thin films.

  2. UV to NIR photon conversion in Nd-doped rutile and anatase titanium dioxide films for silicon solar cell application

    Science.gov (United States)

    Le Boulbar, E.; Millon, E.; Ntsoenzok, E.; Hakim, B.; Seiler, W.; Boulmer-Leborgne, C.; Perrière, J.

    2012-06-01

    Undoped and Nd-doped titanium dioxide anatase and rutile films have been grown by pulsed-laser deposition at 700 °C under 0.1 mbar O2. By selecting adequate substrates, TiO2 films doped with 1, 2 or 5 at.% Nd were grown and constituted with polycrystalline rutile, highly oriented (2 0 0) rutile film, or oriented (0 0 4) anatase. An UV to NIR photon conversion is evidenced in the films. Indeed, intense and well-resolved emission lines from Nd3+ have been observed upon excitation above the TiO2 bandgap at room temperature. The sensitised emission of Nd3+ is found to be much efficient in rutile than in anatase structure. Low temperature photoluminescence measurements lead to fine resolved peaks corresponding to the Nd3+ 4f transitions with different spectral characteristic according to the host matrix used. Photoluminescence dependence temperature evidences that the light emission from Nd3+ in anatase-based films is probably influenced by the presence of self-trapped excitons or by orbital interaction. Mechanisms of sensitisation host to Nd3+ are proposed for both matrixes. Finally, the Nd dopant concentration and the microstructure of TiO2 rutile films are found to affect the photoluminescence emission intensity. Rutile film (2 0 0) oriented is the most adapted host matrix to sensitise 1 at.% Nd3+ ions for an emission around 1064 nm making such Nd-doped layers interesting for photon conversion by down shifting process.

  3. Nanostructured Multilayer Composite Films of Manganese Dioxide/Nickel/Copper Sulfide Deposited on Polyethylene Terephthalate Supporting Substrate

    Directory of Open Access Journals (Sweden)

    Awangku Nabil Syafiq Bin Awangku Metosen

    2015-01-01

    Full Text Available Nanostructured multilayer manganese dioxide/nickel/copper sulfide (MnO2/Ni/CuS composite films were successfully deposited onto supporting polyethylene terephthalate (PET substrate through the sequential deposition of CuS, Ni, and MnO2 thin films by chemical bath deposition, electrodeposition, and horizontal submersion deposition techniques, respectively. Deposition of each thin-film layer was optimized by varying deposition parameters and conditions associated with specific deposition technique. Both CuS and Ni thin films were optimized for their electrical conductivity whereas MnO2 thin film was optimized for its microstructure and charge capacity. The electrochemical properties of nanostructured multilayer MnO2/Ni/CuS composite films were evaluated by cyclic voltammetry as electrode materials of an electrochemical capacitor prototype in a dual-planar device configuration. Cyclic voltammogram in mild Na2SO4 aqueous electrolyte exhibited a featureless and almost rectangular shape which was indicative of the ideal capacitive behavior and high cycling reversibility of the electrochemical capacitor prototype. Nanostructured multilayer MnO2/Ni/CuS composite films on supporting polyethylene terephthalate (PET substrate could potentially be utilized as electrode materials for the fabrication of high performance electrochemical capacitors.

  4. Enhanced luminous transmittance of thermochromic VO2 thin film patterned by SiO2 nanospheres

    Science.gov (United States)

    Zhou, Liwei; Liang, Jiran; Hu, Ming; Li, Peng; Song, Xiaolong; Zhao, Yirui; Qiang, Xiaoyong

    2017-05-01

    In this study, an ordered SiO2 nanosphere array coated with vanadium dioxide (VO2) has been fabricated to enhance transmittance with the potential application as an energy-efficient coating in the field of smart windows. SiO2 arrays were formed using the methods of self-assembly, and VO2 thin films were prepared by rapid thermal annealing (RTA) of sputtered vanadium films. VO2@SiO2 arrays were characterized by scanning electron microscopy, X-ray diffraction, a four-point probe, and UV-vis-NIR spectrophotometry. Compared with the planar films, the films deposited on 300 nm diameter SiO2 nanospheres can offer approximately 18% enhancement of luminous transmission (Tlum) because the diameter is smaller than the given wavelength and the protuberance of the surface array behaves as a gradation of refractive index producing antireflection. The solar regulation efficiency was not much deteriorated.

  5. Dependence of Vanadium Recovery

    African Journals Online (AJOL)

    a large-scale vanadium processing or separation processes where vanadium is a contaminant. However, the ... in a separating funnel, swirled manually and later on a mechanical shaker operated at 120 rpm for 2 minutes ..... (40% v/v) TBP and the relevant scheme for extraction would be according to Equation 7. VOCl + n ...

  6. Growth behaviors and biocidal properties of titanium dioxide films depending on nucleation duration in liquid phase deposition

    Science.gov (United States)

    Park, Sohyeon; Park, Joohee; Heo, Jiwoong; Hong, Bo Young; Hong, Jinkee

    2017-12-01

    Liquid phase deposition (LPD), which is a method to directly form a titanium dioxide (TiO2) film on a substrate, is the most practical method for applying TiO2 films to medical devices because it is performed at lower temperatures than other methods. The TiO2 films to be applied to medical devices should offer excellent antibacterial effect, but should be stable to normal cells and have appropriate strength. In this research, we observed that the size, shape, and density of TiO2 particles varied with the nucleation duration in LPD and confirmed that these results caused changes in several properties including the mechanical properties, cytotoxicity and antibacterial effect of TiO2 films. From the analysis of these results, we established the conditions for the preparation of TiO2 films that are suitable for medical devices and suggest a new approach to the study of TiO2 films prepared by LPD.

  7. Studies on the mechanism of printing film-coated tablets containing titanium dioxide in the film by using UV laser irradiation.

    Science.gov (United States)

    Kato, Yoshiteru; Nakashima, Yasuhiko; Shino, Naoki; Sasaki, Koichi; Hosokawa, Akihiro; Ishihara, Hiroshi

    2010-04-01

    The purpose of this article is to study a detailed mechanism of printing when film-coated tablets were irradiated by UV laser at a wavelength of 355 nm. Hydroxypropylmethylcellulose (HPMC) film containing titanium dioxide (TiO(2)) and the film not containing TiO(2) and TiO(2) powder were lirradiated by the UV laser and estimated by the morphological observation by zoom stereo microscope, thermogravimetric analysis (TGA), total color difference (dE), X-ray powder diffraction (XRD), and dispersive Raman microscopy. In the case of the film containing TiO(2), the film showed a visible change in its color from white to gray by the UV laser irradiation. By zoom stereo microscope, it was found that the entire UV laser-irradiated area was not grayed uniformly, but many black particles, whose diameter was about 2 microm, were observed on the film. When TiO(2) powder was irradiated by the UV laser, a visible change in its color from white to gray was observed similar to the case of the film containing TiO(2). There were many black particles locally in the UV laser-treated TiO(2) powder by the morphological observation, and these black particles, agglomerates of the grayed oxygen-defected TiO(2), were associated with the visible change of the TiO(2). It was found that the film-coated tablets were printed utilizing the formation of the black particles by the agglomeration of the grayed oxygen-defected TiO(2) by the UV laser irradiation.

  8. VO2 thin films and nanoparticles for energy-saving applications in architectural elements

    OpenAIRE

    Garcia, Ivan Aristides Ferreira

    2015-01-01

    Vanadium dioxide (VO2) is a promising material with large interest in construction industry and architecture, due to its thermochromic properties. This material may be used to create "smart" coatings that result in improvements in the buildings energy efficiency, by reducing heat exchanges and, consequently, the need for acclimatization. In this work, VO2 thin films and coatings were produced and tested in laboratory, to apply in architectural elements, such as glass, rooftop tiles and exteri...

  9. Bench Scale Thin Film Composite Hollow Fiber Membranes for Post-Combustion Carbon Dioxide Capture

    Energy Technology Data Exchange (ETDEWEB)

    Glaser, Paul [General Electric Global Research, Niskayuna, NY (United States); Bhandari, Dhaval [General Electric Global Research, Niskayuna, NY (United States); Narang, Kristi [General Electric Global Research, Niskayuna, NY (United States); McCloskey, Pat [General Electric Global Research, Niskayuna, NY (United States); Singh, Surinder [General Electric Global Research, Niskayuna, NY (United States); Ananthasayanam, Balajee [General Electric Global Research, Niskayuna, NY (United States); Howson, Paul [General Electric Global Research, Niskayuna, NY (United States); Lee, Julia [General Electric Global Research, Niskayuna, NY (United States); Wroczynski, Ron [General Electric Global Research, Niskayuna, NY (United States); Stewart, Frederick [Idaho National Lab. (INL), Idaho Falls, ID (United States); Orme, Christopher [Idaho National Lab. (INL), Idaho Falls, ID (United States); Klaehn, John [Idaho National Lab. (INL), Idaho Falls, ID (United States); McNally, Joshua [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rownaghi, Ali [Georgia Inst. of Technology, Atlanta, GA (United States); Lu, Liu [Georgia Inst. of Technology, Atlanta, GA (United States); Koros, William [Georgia Inst. of Technology, Atlanta, GA (United States); Goizueta, Roberto [Georgia Inst. of Technology, Atlanta, GA (United States); Sethi, Vijay [Western Research Inst., Laramie, WY (United States)

    2015-04-01

    GE Global Research, Idaho National Laboratory (INL), Georgia Institute of Technology (Georgia Tech), and Western Research Institute (WRI) proposed to develop high performance thin film polymer composite hollow fiber membranes and advanced processes for economical post-combustion carbon dioxide (CO2) capture from pulverized coal flue gas at temperatures typical of existing flue gas cleanup processes. The project sought to develop and then optimize new gas separations membrane systems at the bench scale, including tuning the properties of a novel polyphosphazene polymer in a coating solution and fabricating highly engineered porous hollow fiber supports. The project also sought to define the processes needed to coat the fiber support to manufacture composite hollow fiber membranes with high performance, ultra-thin separation layers. Physical, chemical, and mechanical stability of the materials (individual and composite) towards coal flue gas components was considered via exposure and performance tests. Preliminary design, technoeconomic, and economic feasibility analyses were conducted to evaluate the overall performance and impact of the process on the cost of electricity (COE) for a coal-fired plant including capture technologies. At the onset of the project, Membranes based on coupling a novel selective material polyphosphazene with an engineered hollow fiber support was found to have the potential to capture greater than 90% of the CO2 in flue gas with less than 35% increase in COE, which would achieve the DOE-targeted performance criteria. While lab-scale results for the polyphosphazene materials were very promising, and the material was incorporated into hollow-fiber modules, difficulties were encountered relating to the performance of these membrane systems over time. Performance, as measured by both flux of and selectivity for CO2 over other flue gas constituents was found to deteriorate over time, suggesting a system that was

  10. Photoactive Metal-Organic Framework and Its Film for Light-Driven Hydrogen Production and Carbon Dioxide Reduction.

    Science.gov (United States)

    Wu, Pengyan; Guo, Xiangyang; Cheng, Linjuan; He, Cheng; Wang, Jian; Duan, Chunying

    2016-08-15

    The design of a new photocatalytic system and integrating the essential components in a structurally controlled manner to create artificially photosynthetic systems is high desirable. By incorporating a photoactive triphenylamine moiety to assemble a Gd-based metal-organic framework as a heterogeneous photosensitizer, new artificial systems were constructed for the proton and carbon dioxide reduction under irradiation. The assembled MOFs exhibited a one-dimensional metal-oxygen pillar that was connected together by the depronated TCA(3-) ligands to form a three-dimensional noninterpenetrating porous framework. The combining of proton reduction and/or the carbon dioxide reduction catalysts, i.e., the Fe-Fe hydrogenase active site models and the Ni(Cyclam) complexes, initiated a photoinduced single electron transfer from its excited state to the substrate. The system exhibited an initial TOF of 320 h(-1) of hydrogen per catalyst and an overall quantum yield of about 0.21% and is able to reduce carbon dioxide under irradiation. The deposit of the photoactive Gd-TCA into the film of an α-Al2O3 plate provided a platform for the practical applications through prolonging the lifetime of the artifical system and allowed the easily operated devices being recyclable as a promising photocatalytic system.

  11. The Development of Non-Enzymatic Glucose Biosensors Based on Electrochemically Prepared Polypyrrole–Chitosan–Titanium Dioxide Nanocomposite Films

    Directory of Open Access Journals (Sweden)

    Ali M. A. Abdul Amir AL-Mokaram

    2017-05-01

    Full Text Available The performance of a modified electrode of nanocomposite films consisting of polypyrrole–chitosan–titanium dioxide (Ppy-CS-TiO2 has been explored for the developing a non-enzymatic glucose biosensors. The synergy effect of TiO2 nanoparticles (NPs and conducting polymer on the current responses of the electrode resulted in greater sensitivity. The incorporation of TiO2 NPs in the nanocomposite films was confirmed by X-ray photoelectron spectroscopy (XPS spectra. FE-SEM and HR-TEM provided more evidence for the presence of TiO2 in the Ppy-CS structure. Glucose biosensing properties were determined by amperommetry and cyclic voltammetry (CV. The interfacial properties of nanocomposite electrodes were studied by electrochemical impedance spectroscopy (EIS. The developed biosensors showed good sensitivity over a linear range of 1–14 mM with a detection limit of 614 μM for glucose. The modified electrode with Ppy-CS nanocomposite also exhibited good selectivity and long-term stability with no interference effect. The Ppy-CS-TiO2 nanocomposites films presented high electron transfer kinetics. This work shows the role of nanomaterials in electrochemical biosensors and describes the process of their homogeneous distribution in composite films by a one-step electrochemical process, where all components are taken in a single solution in the electrochemical cell.

  12. Phase transformation of nanostructured titanium dioxide thin films grown by sol-gel method

    Energy Technology Data Exchange (ETDEWEB)

    Soenmezoglu, Savas [Karamanoglu Mehmetbey University, Faculty of Kamil Ozdag Science, Department of Physics, Karaman (Turkey); Cankaya, Gueven [Yildirim Beyazit University, Faculty of Engineering and Natural Sciences, Materials Engineering, Ankara (Turkey); Serin, Necmi [Ankara University, Faculty of Engineering, Department of Physics Engineering, Ankara (Turkey)

    2012-04-15

    Nanostructured TiO{sub 2} thin films were deposited on quartz glass at room temperature by sol-gel dip coating method. The effects of annealing temperature between 200 C to 1100 C were investigated on the structural, morphological, and optical properties of these films. The X-ray diffraction results showed that nanostructured TiO{sub 2} thin film annealed at between 200 C to 600 C was amorphous transformed into the anatase phase at 700 {sup circle} C, and further into rutile phase at 1000 C. The crystallite size of TiO{sub 2} thin films was increased with increasing annealing temperature. From atomic force microscopy images it was confirmed that the microstructure of annealed thin films changed from column to nubbly. Besides, surface roughness of the thin films increases from 1.82 to 5.20 nm, and at the same time, average grain size as well grows up from about 39 to 313 nm with increase of the annealing temperature. The transmittance of the thin films annealed at 1000 and 1100 C was reduced significantly in the wavelength range of about 300-700 nm due to the change of crystallite phase. Refractive index and optical high dielectric constant of the n-TiO{sub 2} thin films were increased with increasing annealing temperature, and the film thickness and the optical band gap of nanostructured TiO{sub 2} thin films were decreased. (orig.)

  13. Electron beam modification of vanadium dioxide oscillators

    Energy Technology Data Exchange (ETDEWEB)

    Belyaev, Maksim; Velichko, Andrey; Putrolaynen, Vadim; Perminov, Valentin; Pergament, Alexander [Petrozavodsk State University, Petrozavodsk (Russian Federation)

    2017-03-15

    The paper presents the results of a study of electron-beam modification (EBM) of VO{sub 2}-switch I-V curve threshold parameters and the self-oscillation frequency of a circuit containing such a switching device. EBM in vacuum is reversible and the parameters are restored when exposed to air at pressure of 150 Pa. At EBM with a dose of 3 C cm{sup -2}, the voltages of switching-on (V{sub th}) and off (V{sub h}), as well as the OFF-state resistance R{sub off}, decrease down to 50% of the initial values, and the oscillation frequency increases by 30% at a dose of 0.7 C cm{sup -2}. Features of physics of EBM of an oscillator are outlined considering the contribution of the metal and semiconductor phases of the switching channel. Controlled modification allows EBM forming of switches with preset parameters. Also, it might be used in artificial oscillatory neural networks for pattern recognition based on frequency shift keying. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  14. Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

    Science.gov (United States)

    Ozeki, K.; Hirakuri, K. K.; Masuzawa, T.

    2011-04-01

    Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO2) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers. For the flavour removal test, two types of multilayer films were prepared, DLC/TiO2 films and DLC/TiO2/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO2-coated and the DLC/TiO2/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO2 coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO2/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO2/DLC film had a photocatalytic effect even though the TiO2 film was covered with the DLC film.

  15. Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

    Energy Technology Data Exchange (ETDEWEB)

    Ozeki, K., E-mail: ozeki@mx.ibaraki.ac.jp [Department of Mechanical Engineering, Ibaraki University, 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511 (Japan); Frontier Research Center for Applied Atomic Sciences, 162-1 Shirakata, Toukai, Ibaraki 319-1106 (Japan); Hirakuri, K.K. [Applied Systems Engineering, Graduate School of Science and Engineering, Tokyo Denki University, Ishizaka, Hatoyama, Hiki, Saitama 350-0394 (Japan); Masuzawa, T. [Department of Mechanical Engineering, Ibaraki University, 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511 (Japan)

    2011-04-15

    Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO{sub 2}) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers. For the flavour removal test, two types of multilayer films were prepared, DLC/TiO{sub 2} films and DLC/TiO{sub 2}/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO{sub 2}-coated and the DLC/TiO{sub 2}/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO{sub 2} coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO{sub 2}/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO{sub 2}/DLC film had a photocatalytic effect even though the TiO{sub 2} film was covered with the DLC film.

  16. Two-Functional Direct Current Sputtered Silver-Containing Titanium Dioxide Thin Films

    Directory of Open Access Journals (Sweden)

    Ditta IB

    2009-01-01

    Full Text Available Abstract The article reports on structure, mechanical, optical, photocatalytic and biocidal properties of Ti–Ag–O films. The Ti–Ag–O films were reactively sputter-deposited from a composed Ti/Ag target at different partial pressures of oxygen on unheated glass substrate held on floating potentialU fl. It was found that addition of ~2 at.% of Ag into TiO2film has no negative influence on UV-induced hydrophilicity of TiO2film. Thick (~1,500 nm TiO2/Ag films containing (200 anatase phase exhibit the best hydrophilicity with water droplet contact angle (WDCA lower than 10° after UV irradiation for 20 min. Thick (~1,500 nm TiO2/Ag films exhibited a better UV-induced hydrophilicity compared to that of thinner (~700 nm TiO2/Ag films. Further it was found that hydrophilic TiO2/Ag films exhibit a strong biocidal effect under both the visible light and the UV irradiation with 100% killing efficiency ofEscherichia coliATCC 10536 after UV irradiation for 20 min. Reported results show that single layer of TiO2with Ag distributed in its whole volume exhibits, after UV irradiation, simultaneously two functions: (1 excellent hydrophilicity with WDCA < 10° and (2 strong power to killE. colieven under visible light due to direct toxicity of Ag.

  17. Nanostructured Mesoporous Titanium Dioxide Thin Film Prepared by Sol-Gel Method for Dye-Sensitized Solar Cell

    Directory of Open Access Journals (Sweden)

    Yu-Chang Liu

    2011-01-01

    Full Text Available Titanium dioxide (TiO2 paste was prepared by sol-gel and hydrothermal method with various precursors. Nanostructured mesoporous TiO2 thin-film back electrode was fabricated from the nanoparticle colloidal paste, and its performance was compared with that made of commercial P25 TiO2. The best performance was demonstrated by the DSSC having a 16 μm-thick TTIP-TiO2 back electrode, which gave a solar energy conversion efficiency of 6.03%. The ability of stong adhesion on ITO conducting glass substrate and the high surface area are considered important characteristics of TiO2 thin film. The results show that a thin film with good adhesion can be made from the prepared colloidal paste as a result of alleviating the possibility of electron transfer loss. One can control the colloidal particle size from sol-gel method. Therefore, by optimizing the preparation conditions, TiO2 paste with nanoparticle and narrow diameter distribution was obtained.

  18. The Effect of Annealing on the Structural and Optical Properties of Titanium Dioxide Films Deposited by Electron Beam Assisted PVD

    Directory of Open Access Journals (Sweden)

    Yaser M. Abdulraheem

    2013-01-01

    Full Text Available Titanium dioxide thin films were deposited on crystalline silicon substrates by electron beam physical vapor deposition. The deposition was performed under vacuum ranging from 10−5 to 10−6 Torr without process gases, resulting in homogeneous TiO2-x layers with a thickness of around 100 nm. Samples were then annealed at high temperatures ranging from 500°C to 800°C for 4 hours under nitrogen, and their structural and optical properties along with their chemical structure were characterized before and after annealing. The chemical and structural characterization revealed a substoichiometric TiO2-x film with oxygen vacancies, voids, and an interface oxide layer. It was found from X-ray diffraction that the deposited films were amorphous and crystallization to anatase phase occurred for annealed samples and was more pronounced for annealing temperatures above 700°C. The refractive index obtained through spectroscopic ellipsometry ranged between 2.09 and 2.37 in the wavelength range, 900 nm to 400 nm for the as-deposited sample, and jumped to the range between 2.23 and 2.65 for samples annealed at 800°C. The minimum surface reflectance changed from around 0.6% for the as-deposited samples to 2.5% for the samples annealed at 800°C.

  19. Electrochemical Properties of Transparent Conducting Films of Tantalum-Doped Titanium Dioxide

    Czech Academy of Sciences Publication Activity Database

    Krýsová, Hana; Mazzolini, P.; Casari, C. S.; Russo, V.; Li Bassi, A.; Kavan, Ladislav

    2017-01-01

    Roč. 232, APR 2017 (2017), s. 44-53 ISSN 0013-4686 R&D Projects: GA ČR GA13-07724S Institutional support: RVO:61388955 Keywords : titanium dioxide * tantalum doping * electrochemistry Subject RIV: CG - Electrochemistry OBOR OECD: Electrochemistry (dry cells, batteries, fuel cells, corrosion metals, electrolysis) Impact factor: 4.798, year: 2016

  20. Preparation and characterization of conductive and transparent ruthenium dioxide sol-gel films.

    Science.gov (United States)

    Allhusen, John S; Conboy, John C

    2013-11-27

    RuO2 conductive thin films were synthesized using the sol-gel method and deposited onto transparent insulating substrates. The optical transmission, film thickness, surface morphology and composition, resistivity, and spectroelectrochemical performance have been characterized. The optical transmission values of these films ranged from 70 to 89% in the visible region and from 56 to 88% in the infrared region. Resistivity values of the RuO2 sol-gel films varied from 1.02 × 10(-3) to 1.13 Ω cm and are highly dependent on the initial solution concentration of RuO2 in the sol-gel. The RuO2 sol-gel films were used as electrodes for the electrochemical oxidation and reduction of ferrocenemethanol. The electrochemical behavior of our novel RuO2 sol-gel films was compared to that of a standard platinum disk electrode and showed no appreciable differences in the half-wave potential (E1/2). The mechanical and chemical stability of the coatings was tested by physical abrasion and exposure to highly acidic, oxidizing Piranha solution. Repeated exposure to these extreme conditions did not result in any appreciable decline in electrochemical performance. Finally, the use of the novel RuO2 sol-gel conductive and transparent films was demonstrated in a spectroelectrochemistry experiment in which the oxidation and reduction of ferrocenemethanol was monitored via UV-vis spectroscopy as the applied potential was cycled.

  1. Spacer Thickness-Dependent Electron Transport Performance of Titanium Dioxide Thick Film for Dye-Sensitized Solar Cells

    Directory of Open Access Journals (Sweden)

    Reda E. El-Shater

    2015-01-01

    Full Text Available A titanium dioxide (P25 film was deposited by cast coating as conductive photoelectrode and subsequently immersed in dye solution (N719 to fabricate the photoanode of dye-sensitized solar cells (DSSCs. A plastic spacer was used as a separation and sealant layer between the photoanode and the counter electrode. The effect of the thickness of this spacer on the transfer of electrons in the liquid electrolyte of the DSSCs was studied by means of both IV curves and electrochemical impedance. Using a spacer thickness range of 20 μm to 50 μm, efficiency ranges from 3.73% to 7.22%. The highest efficiency of 7.22% was obtained with an optimal spacer thickness of 40 μm.

  2. Properties of Silicon Dioxide Film Deposited By PECVD at Low Temperature/Pressure

    Directory of Open Access Journals (Sweden)

    Meysam Zarchi

    2014-07-01

    Full Text Available conventional plasma enhanced chemical vapor deposition (PECVD at low temperature/pressure with silane (SiH4 and nitrous oxide (N2O as precursor gases. The ellipsometer and stress measurement system were used to test the thickness and refractive index uniformity of the SiO2 film fabricated. The effects of radio frequency (RF power chamber pressure and N2O/SiH4 flow ratio on the properties of SiO2 film were studied. The results show that the refractive index of SiO2 film is mainly determined by N2O/SiH4 flow ratio .Moreover, the formation of SiO2 thin films is confirmed by Fourier transform infrared (FTIR spectroscopy. The thickness and refractive indices of the films measured by ellipsometry C-V measurement show that the electrical properties are directly related to process parameters and Si/SiO2 interface. The MIS structures were also fabricated from optimized SiO2 layer to study C-V measurement and to estimate interface, oxide and effective border traps density. The deposited SiO2 films have good uniformity, compact structure, high deposition rate, low deposition temperature and controllable stress, which can be widely, used in semiconductor devices.

  3. Fabrication of titanium dioxide and tungstophosphate nanocomposite films and their photocatalytic degradation for methyl orange.

    Science.gov (United States)

    Niu, Ping; Hao, Jingcheng

    2011-11-15

    Photocatalytic multilayer films with different numbers of bilayers were prepared via an electrostatic layer-by-layer (LbL) self-assembly method. These LbL films were characterized by UV-vis spectroscopy, atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Our results indicate that TiO(2) and tungstophosphate (H(3)PW(12)O(40), abbreviated as PW(12)) are successfully incorporated into the thin films. The as-prepared (TiO(2)/PW(12))(n) films show good photocatalytic performance toward methyl orange (MO) solution at pH 2.0, which is attributed to the synergistic effect between TiO(2) and PW(12). The effect of experimental parameters including number of bilayers, initial concentration, and pH value of dye solution were also studied. The multilayer films can be easily recovered and reused several times with little change of degradation, indicating that they are stable under the ultraviolet (UV) irradiation. The detection of active species displays that active holes (h(+)) play a dominant role for MO photodegradation in the TiO(2)/PW(12) system. Taking advantage of immobilization of catalysts on glass slides, the problem of recovery is solved. It is expected that photocatalytic multilayer films have substantial applications in industry.

  4. Structural, optical and Raman scattering studies on DC magnetron sputtered titanium dioxide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Karunagaran, B.; Kim, Kyunghae; Mangalaraj, D.; Yi, Junsin [School of Information and Communication Engineering, Sungkyunkwan University, Chunchun-dong, Jangan-gu, Suwon 440-476 (Korea, Republic of); Velumani, S. [Coordinacion de Investigacion y Desarrollo de Ductos, IMP, Eje Central Lazaro Cardenas 152, D.F., C.P.07720 (Mexico)

    2005-07-15

    Thin films of TiO{sub 2} were deposited by DC magnetron sputtering. The thicknesses of the films were measured using alpha step profilometer technique. Auger electron spectroscopy (AES) is used to determine the composition of the films. The influence of post-deposition annealing at 673 and 773K on the structural, optical and Raman scattering was studied. The thicknesses of the films were found to be more or less the same irrespective of the annealing temperature and time. XRD results reveal the amorphous nature of the as-deposited film while the annealed samples were found to be crystalline with a tetragonal symmetry. Using the optical transmittance method, the optical constants such as band gap, refractive index and absorption coefficient were calculated and the influence of thermal annealing on these properties was reported. Raman study was employed to study the existence of different frequency modes and improvement of crystallinity of the TiO{sub 2} films and the effect of annealing temperature on the Raman shift is studied and reported.

  5. Functional doped metal oxide films. Zinc oxide (ZnO) as transparent conducting oxide (TCO) titanium dioxide (TiO{sub 2}) as thermographic phosphor and protective coating

    Energy Technology Data Exchange (ETDEWEB)

    Nebatti Ech-Chergui, Abdelkader

    2011-07-29

    Metalorganic chemical vapor deposition (MOCVD) was used in the present work. Un-doped and Al-doped ZnO films were developed using two reactors: Halogen Lamp Reactor (HLR) (a type of Cold Wall Reactor) and Hot Wall Reactor (HWR), and a comparison was made between them in terms of the film properties. Zinc acetylacetonate was used as precursor for ZnO films while aluminum acetylacetonate was used for doping. The amount of Al doping can be controlled by varying the gas flow rate. Well ordered films with aluminum content between 0 and 8 % were grown on borosilicate glass and silicon. The films obtained are 0.3 to 0.5 {mu}m thick, highly transparent and reproducible. The growth rate of ZnO films deposited using HLR is less than HWR. In HLR, the ZnO films are well oriented along c-axis ((002) plane). ZnO films are commonly oriented along the c-axis due to its low surface free energy. On the other hand, the HWR films are polycrystalline and with Al doping these films aligned along the a-axis ((100) plane) which is less commonly observed. The best films were obtained with the HLR method showing a minimum electrical resistivity of 2.4 m{omega}cm and transmittance of about 80 % in the visible range. The results obtained for Al-doped films using HLR are promising to be used as TCOs. The second material investigated in this work was un-doped and doped titanium dioxide (TiO{sub 2}) films- its preparation and characterization. It is well known that thermographic phosphors can be used as an optical method for the surface temperature measurement. For this application, the temperature-dependent luminescence properties of europium (III)-doped TiO{sub 2} thin films were studied. It was observed that only europium doped anatase films show the phosphorescence. Rutile phase do not show phosphorescence. The films were prepared by the sol-gel method using the dip coating technique. The structures of the films were determined by X-ray diffraction (XRD). The excitation and the emission

  6. Air purification by heterogeneous photocatalytic oxidation with multi-doped thin film titanium dioxide

    Energy Technology Data Exchange (ETDEWEB)

    O' Keeffe, Cormac, E-mail: cormac.okeeffe@theta.ie [Theta Chemicals Ltd., Station Road, Ballindine, Claremorris, Mayo (Ireland); Gannon, Paul; Gilson, Paul [Theta Chemicals Ltd., Station Road, Ballindine, Claremorris, Mayo (Ireland); Kafizas, Andreas; Parkin, Ivan P. [Department of Chemistry, University College London, Christopher Ingold Laboratories, 20 Gordon Street, London WC1H 0AJ (United Kingdom); Binions, Russell [School of Engineering and Materials Sciences, Queen Mary University of London, Mile End Road, London E1 4NS (United Kingdom)

    2013-06-30

    Multi element-doped titania films (F, S-TiO{sub 2}) were produced via sol–gel techniques and deposited on glass and ceramic substrates with an annealing temperature of 500 °C. The films were characterised by X-ray diffraction, Raman Spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy. The X-ray diffraction and Raman spectrum showed the films to have an anatase TiO{sub 2} structure with X-ray photoelectron spectroscopy confirming the presence of sulphur, fluorine and carbon doping. The titania coated glass and ceramic substrates were compared against two commercially available TiO{sub 2} coated products for the photo-destruction of NO{sub 2(g)}. The study included both equivalent indoor and outdoor test conditions. The multi-doped titania films were shown to provide a genuine method of air purification under both visible (room lighting) and UVA lighting with photo-destruction rates as high as 72%. - Highlights: • Synthesis of multi-doped titania films • Excellent NO{sub 2} conversion rates for coated ceramic tiles • Excellent NO{sub 2} conversion rates for coated glass substrates • Significantly better conversion rates for existing commercial products.

  7. Stress in ion-beam assisted silicon dioxide and tantalum pentoxide thin films

    CERN Document Server

    Sirotkina, N

    2003-01-01

    Ta sub 2 O sub 5 and SiO sub 2 thin films, deposited at room temperature by ion-beam sputtering (IBS) and dual ion-beam sputtering (DIBS), and SiO sub 2 films, deposited by reactive e-beam evaporation and ion-assisted deposition, were studied. The energy (150-600 eV) and ion-to-atom arrival ratio (0.27-2.0) of assisting argon and oxygen ions were varied. Influence of deposition conditions (deposition system geometry, nature and amount of gas in the chamber, substrate cleaning and ion-assistance parameters) on films properties (stress, composition, refractive index n sub 5 sub 0 sub 0 sub n sub m and extinction coefficient k sub 5 sub 0 sub 0 sub n sub m) was investigated. A scanning method, based on substrate curvature measurements by laser reflection and stress calculation using the Stoney equation, was employed. RBS showed that stoichiometric Ta sub 2 O sub 5 films contain impurities of Ar, Fe and Mo. Stoichiometric SiO sub 2 films also contain Ta impurity. Argon content increases with ion bombardment and, ...

  8. The Effects of Two Thick Film Deposition Methods on Tin Dioxide Gas Sensor Performance

    Directory of Open Access Journals (Sweden)

    Smitesh D. Bakrania

    2009-08-01

    Full Text Available This work demonstrates the variability in performance between SnO2 thick film gas sensors prepared using two types of film deposition methods. SnO2 powders were deposited on sensor platforms with and without the use of binders. Three commonly utilized binder recipes were investigated, and a new binder-less deposition procedure was developed and characterized. The binder recipes yielded sensors with poor film uniformity and poor structural integrity, compared to the binder-less deposition method. Sensor performance at a fixed operating temperature of 330 ºC for the different film deposition methods was evaluated by exposure to 500 ppm of the target gas carbon monoxide. A consequence of the poor film structure, large variability and poor signal properties were observed with the sensors fabricated using binders. Specifically, the sensors created using the binder recipes yielded sensor responses that varied widely (e.g., S = 5 – 20, often with hysteresis in the sensor signal. Repeatable and high quality performance was observed for the sensors prepared using the binder-less dispersion-drop method with good sensor response upon exposure to 500 ppm CO (S = 4.0 at an operating temperature of 330 ºC, low standard deviation to the sensor response (±0.35 and no signal hysteresis.

  9. The effects of two thick film deposition methods on tin dioxide gas sensor performance.

    Science.gov (United States)

    Bakrania, Smitesh D; Wooldridge, Margaret S

    2009-01-01

    This work demonstrates the variability in performance between SnO(2) thick film gas sensors prepared using two types of film deposition methods. SnO(2) powders were deposited on sensor platforms with and without the use of binders. Three commonly utilized binder recipes were investigated, and a new binder-less deposition procedure was developed and characterized. The binder recipes yielded sensors with poor film uniformity and poor structural integrity, compared to the binder-less deposition method. Sensor performance at a fixed operating temperature of 330 °C for the different film deposition methods was evaluated by exposure to 500 ppm of the target gas carbon monoxide. A consequence of the poor film structure, large variability and poor signal properties were observed with the sensors fabricated using binders. Specifically, the sensors created using the binder recipes yielded sensor responses that varied widely (e.g., S = 5 - 20), often with hysteresis in the sensor signal. Repeatable and high quality performance was observed for the sensors prepared using the binder-less dispersion-drop method with good sensor response upon exposure to 500 ppm CO (S = 4.0) at an operating temperature of 330 °C, low standard deviation to the sensor response (±0.35) and no signal hysteresis.

  10. Synthesis, fractionation, and thin film processing of nanoparticles using the tunable solvent properties of carbon dioxide gas expanded liquids

    Science.gov (United States)

    Anand, Madhu

    nanoparticle populations. This study details the influence of various factors on the size separation process, such as the types of nanoparticles, ligand type and solvent type as well as the use of recursive fractionation and the time allowed for settling during each fractionation step. This size selective precipitation technique was also applied to fractionate and separate polydisperse dispersions of CdSe/ZnS semiconductor nanocrystals into very distinct size and color fractions based solely on the pressure tunable solvent properties of CO2 expanded liquids. This size selective precipitation of nanoparticles is achieved by finely tuning the solvent strength of the CO2/organic solvent medium by simply adjusting the applied CO2 pressure. These subtle changes affect the balance between osmotic repulsive and van der Waals attractive forces thereby allowing fractionation of the nanocrystals into multiple narrow size populations. Thermodynamic analysis of nanoparticle size selective fractionation was performed to develop a theoretical model based on the thermodynamic properties of gas expanded liquids. We have used the general phenomenon of nanoparticle precipitation with CO2 expanded liquids to create dodecanethiol stabilized gold nanoparticle thin films. This method utilizes CO2 as an anti-solvent for low defect, wide area gold nanoparticle film formation employing monodisperse gold nanoparticles. Dodecanethiol stabilized gold particles are precipitated from hexane by controllably expanding the solution with carbon dioxide. Subsequent addition of carbon dioxide as a dense supercritical fluid then provides for removal of the organic solvent while avoiding the dewetting effects common to evaporating solvents. Unfortunately, the use of carbon dioxide as a neat solvent in nanoparticles synthesis and processing is limited by the very poor solvent strength of dense phase CO2. As a result, most current techniques employed to synthesize and disperse nanoparticles in neat carbon dioxide

  11. Vacuum arc plasma deposition of thin titanium dioxide films on silicone elastomer as a functional coating for medical applications.

    Science.gov (United States)

    Boudot, Cécile; Kühn, Marvin; Kühn-Kauffeldt, Marina; Schein, Jochen

    2017-05-01

    Silicone elastomer is a promising material for medical applications and is widely used for implants with blood and tissue contact. However, its strong hydrophobicity limits adhesion of tissue cells to silicone surfaces, which can impair the healing process. To improve the biological properties of silicone, a triggerless pulsed vacuum cathodic arc plasma deposition technique was applied to deposit titanium dioxide (TiO2) films onto the surface. Scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and contact angle measurements were used for coating characterization. Deposited films were about 150nm thick and exhibited good adhesion to the underlying silicone substrate. Surface wettability and roughness both increased after deposition of the TiO2 layer. In addition, cell-biological investigations demonstrated that the in-vitro cytocompatibility of TiO2-coated samples was greatly improved without impacting silicone's nontoxicity. For validation of use in medical devices, further investigations were conducted and demonstrated stability of surface properties in an aqueous environment for a period of 68days and the coating's resistance to several sterilization methods. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Study of a QCM Dimethyl Methylphosphonate Sensor Based on a ZnO-Modified Nanowire-Structured Manganese Dioxide Film

    Directory of Open Access Journals (Sweden)

    Guang Li

    2010-09-01

    Full Text Available Sensitive, selective and fast detection of chemical warfare agents is necessary for anti-terrorism purposes. In our search for functional materials sensitive to dimethyl methylphosphonate (DMMP, a simulant of sarin and other toxic organophosphorus compounds, we found that zinc oxide (ZnO modification potentially enhances the absorption of DMMP on a manganese dioxide (MnO2 surface. The adsorption behavior of DMMP was evaluated through the detection of tiny organophosphonate compounds with quartz crystal microbalance (QCM sensors coated with ZnO-modified MnO2 nanofibers and pure MnO2 nanofibers. Experimental results indicated that the QCM sensor coated with ZnO-modified nanostructured MnO2 film exhibited much higher sensitivity and better selectivity in comparison with the one coated with pure MnO2 nanofiber film. Therefore, the DMMP sensor developed with this composite nanostructured material should possess excellent selectivity and reasonable sensitivity towards the tiny gaseous DMMP species.

  13. Electrochemical properties of dip-coated vanadium pentaoxide thin ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 6. Electrochemical properties of dip-coated vanadium pentaoxide thin films. R S INGOLE B J LOKHANDE. Volume 39 Issue 6 ... Author Affiliations. R S INGOLE1 B J LOKHANDE1. School of Physical Sciences, Solapur University, Solapur 413 255, India ...

  14. Planar Hall effect and magnetic anisotropy in epitaxially strained chromium dioxide thin films

    NARCIS (Netherlands)

    Goennenwein, S.T.B.; Keizer, R.S.; Schink, S.W.; Van Dijk, I.; Klapwijk, T.M.; Miao, G.X.; Xiao, G.; Gupta, A.

    2007-01-01

    We have measured the in-plane anisotropic magnetoresistance of 100?nm thick CrO2 thin films at liquid He temperatures. In low magnetic fields H, both the longitudinal and the transverse (planar Hall) resistance show abrupt switches, which characteristically depend on the orientation of H. All the

  15. Tin dioxide sol-gel derived thin films deposited on porous silicon

    NARCIS (Netherlands)

    Cobianu, C.; Savaniu, Cristian; Buiu, Octavian; Dascalu, Dan; Zaharescu, Maria; Parlog, Constanta; van den Berg, Albert; Pecz, Bela

    1997-01-01

    Undoped and Sb-doped SnO2 sol¿gel derived thin films have been prepared for the first time from tin (IV) ethoxide precursor and SbCl3 in order to be utilised for gas sensing applications where porous silicon is used as a substrate. Transparent, crack-free and adherent layers were obtained on

  16. Tin dioxide sol-gel derived thin films deposited on porous silicon

    NARCIS (Netherlands)

    Cobianu, C.; Savaniu, Cristian; Buiu, Octavian; Zaharescu, Maria; Parlog, Constanta; van den Berg, Albert; Pecz, Bela; Dascula, Dan

    1996-01-01

    Undoped and Sb-doped SnO2 sol–gel derived thin films have been prepared for the first time from tin (IV) ethoxide precursor and SbCl3 in order to be utilised for gas sensing applications where porous silicon is used as a substrate. Transparent, crack-free and adherent layers were obtained on

  17. Tin dioxide sol-gel derived films doped with platinum and antimony deposited on porous silicon

    NARCIS (Netherlands)

    Savaniu, C.; Arnautu, A.; Cobianu, C.; Craciun, G.; Flueraru, C.; Zaharescu, M.; Parlog, C.; Paszti, F.; van den Berg, Albert

    1999-01-01

    SnO2 sol-gel derived thin films doped simultaneously with Pt and Sb are obtained and reported for the first time. The Sn sources were tin(IV) ethoxide or tin(II) ethylhexanoate, while hexachloroplatinic acid (H2PtCl6) and antimony chloride (SbCl3) were used as platinum and antimony sources,

  18. Photoactive layer-by-layer films of cellulose phosphate and titanium dioxide containing phosphotungstic acid

    Energy Technology Data Exchange (ETDEWEB)

    Ullah, Sajjad [Instituto de Química de São Carlos, Universidade de São Paulo, PO Box 780, São Carlos, São Paulo 13564-970 (Brazil); Acuña, José Javier Sáez [Centro de Ciências Naturais e Humanas, Universidade Federal do ABC, Santo Andre, Sao Paulo, 09210-170 (Brazil); Pasa, André Avelino [Surface and Thin Film Laboratory, Physics Department, Federal University of Santa Catarina, PO Box 476, Florianópolis, SC 88040-900 (Brazil); Bilmes, Sara A. [Universidad de Buenos Aires, Facultad Ciencias Exactas y Naturales, Instituto de Química Física de los Materiales, Medio Ambiente y Energía – INQUIMAE, Ciudad Universitaria, Pab. 2, Buenos Aires C1428EHA (Argentina); Vela, Maria Elena; Benitez, Guillermo [Laboratorio de Nanoscopías y Fisicoquímica de Superficies, Instituto de Investigaciones Fisicoquímicas Teóricas y Aplicadas (INIFTA), Universidad Nacional de La Plata – CONICET, diagonal 113 esquina 64. C.C.16.Suc.4, 1900 La Plata (Argentina); Rodrigues-Filho, Ubirajara Pereira, E-mail: uprf@iqsc.usp.br [Instituto de Química de São Carlos, Universidade de São Paulo, PO Box 780, São Carlos, São Paulo 13564-970 (Brazil)

    2013-07-15

    A versatile layer-by-layer (LbL) procedure for the preparation of highly dispersed, adherent and porous multilayer films of TiO{sub 2} nanoparticles (NPs) and phosphotungstic acid (HPW) on a variety of substrates at room temperature was developed based on the use of cellulose phosphate (CP) as an efficient and non-conventional polyelectrolyte. UV/vis absorption spectroscopy confirmed the linear and regular growth of the films with the number of immersion cycles and a strong adsorption ability of CP towards TiO{sub 2} NPs. FTIR spectroscopy showed that HPW binds to the surface of TiO{sub 2} through the oxygen atom at the corner of the Keggin structure. XPS results showed that the interaction between TiO{sub 2} and CP is through Ti–O–P linkage. A model is proposed for the TiO{sub 2}–HPW interaction based on XPS and FTIR results. FEG/SEM study of the surface morphology revealed a porous film structure with a homogenous distribution of the TiO{sub 2} NPs induced by CP. HRTEM studies showed that the resulting composite films consist of crystalline anatase and rutile phases and poly-nano-crystalline HPW with a semi-crystalline TiO{sub 2}–HPW interface. These CP/TiO{sub 2} and CP/TiO{sub 2}/HPW LbL films showed good photoactivity against both saturated and unsaturated species, for instance, stearic acid (SA), crystal violet (CV) and methylene blue (MB) under UV irradiation. The CP/HPW films formed on bacterial cellulose (BC) showed good photochromic response which is enhanced in presence of TiO{sub 2} due to an interfacial electron transfer from TiO{sub 2} to HPW. This simple and environmentally safe method can be used to form coatings on a variety of surfaces with photoactive TiO{sub 2} and TiO{sub 2}/HPW films.

  19. Fabrication of nanostructured metal oxide films with supercritical carbon dioxide: Processing and applications

    Science.gov (United States)

    You, Eunyoung

    Nanostructured metal oxide films have many applications in catalysis, microelectronics, microfluidics, photovoltaics and other fields. Since the performance of a device depends greatly on the structure of the material, the development of methodologies that enable prescriptive control of morphology are of great interest. The focus of this work is to control the structure and properties of the nanostructured metal oxide films using novel synthetic schemes in supercritical fluids and to use those films as key building components in alternative energy applications. A supercritical fluid is a substance at a temperature and pressure above its critical point. It typically exhibits gas-like transport properties and liquid-like densities. Supercritical fluid deposition (SFD) utilizes these properties of supercritical CO2 (scCO2) to deposit chemically pure metal, oxides and alloys of metal films. SFD is a chemical vapor deposition (CVD)-like process in the sense that it uses similar metal organic precursors and deposits films at elevated temperatures. Instead of vaporizing or subliming the precursors, they are dissolved in supercritical fluids. SFD has typically shown to exhibit higher precursor concentrations, lower deposition temperatures, conformal deposition of films on high aspect ratio features as compared to CVD. In2 O3, ZnO and SnO2 are attractive materials because they are used in transparent conductors. SFD of these materials were studied and In2 O3 deposition kinetics using tris(2,2,6,6-tetramethyl-3,5-heptanedionato) In (III) as precursor were determined. Growth rate dependence on the deposition temperature and the precursor concentrations were studied and the physicochemical and optical properties of In2 O3 films were characterized. Metal oxide nanochannels that can potentially be used for microfluidics have been fabricated by sequentially performing nanoimprint lithography (NIL) and SFD. NIL was used to pattern photoresist grating on substrates and SFD of TiO2

  20. Elevated transition temperature in Ge doped VO2 thin films

    Science.gov (United States)

    Krammer, Anna; Magrez, Arnaud; Vitale, Wolfgang A.; Mocny, Piotr; Jeanneret, Patrick; Guibert, Edouard; Whitlow, Harry J.; Ionescu, Adrian M.; Schüler, Andreas

    2017-07-01

    Thermochromic GexV1-xO2+y thin films have been deposited on Si (100) substrates by means of reactive magnetron sputtering. The films were then characterized by Rutherford backscattering spectrometry (RBS), four-point probe electrical resistivity measurements, X-ray diffraction, and atomic force microscopy. From the temperature dependent resistivity measurements, the effect of Ge doping on the semiconductor-to-metal phase transition in vanadium oxide thin films was investigated. The transition temperature was shown to increase significantly upon Ge doping (˜95 °C), while the hysteresis width and resistivity contrast gradually decreased. The precise Ge concentration and the film thickness have been determined by RBS. The crystallinity of phase-pure VO2 monoclinic films was confirmed by XRD. These findings make the use of vanadium dioxide thin films in solar and electronic device applications—where higher critical temperatures than 68 °C of pristine VO2 are needed—a viable and promising solution.

  1. Nanoscale Phase Separation and Lattice Complexity in VO2: The Metal–Insulator Transition Investigated by XANES via Auger Electron Yield at the Vanadium L23-Edge and Resonant Photoemission

    Directory of Open Access Journals (Sweden)

    Augusto Marcelli

    2017-12-01

    Full Text Available Among transition metal oxides, VO2 is a particularly interesting and challenging correlated electron material where an insulator to metal transition (MIT occurs near room temperature. Here we investigate a 16 nm thick strained vanadium dioxide film, trying to clarify the dynamic behavior of the insulator/metal transition. We measured (resonant photoemission below and above the MIT transition temperature, focusing on heating and cooling effects at the vanadium L23-edge using X-ray Absorption Near-Edge Structure (XANES. The vanadium L23-edges probe the transitions from the 2p core level to final unoccupied states with 3d orbital symmetry above the Fermi level. The dynamics of the 3d unoccupied states both at the L3- and at the L2-edge are in agreement with the hysteretic behavior of this thin film. In the first stage of the cooling, the 3d unoccupied states do not change while the transition in the insulating phase appears below 60 °C. Finally, Resonant Photoemission Spectra (ResPES point out a shift of the Fermi level of ~0.75 eV, which can be correlated to the dynamics of the 3d// orbitals, the electron–electron correlation, and the stability of the metallic state.

  2. Optical and electrical properties of sol-gel spin coated titanium dioxide thin films

    Science.gov (United States)

    Sahoo, Anusuya; Jayakrishnan, A. R.; Kamakshi, K.; Silva, J. P. B.; Sekhar, K. C.; Gomes, M. J. M.

    2017-08-01

    In this work; TiO2 thin films were deposited on glass and stainless steel substrates by sol-gel spin coating method. The films deposited on glass were annealed at different temperatures (Ta) in the range of 200 to 500 0C and that are deposited on steel substrate were annealed at 800 0C. The optical properties of TiO2 thin films were studied by using UV-VIS spectroscopy and photoluminescence (PL) spectroscopy. The transmittance on the average was found to ≥ 80 % and is found to sensitive to Ta. The PL spectra exhibited the strong emission band associated with band- to- band transition around 390 nm and the two weak bands at 480 and 510 nm associated to the oxygen defects and surface defects respectively. The current-voltage (I-V) characteristics of the Al/TiO2/steel capacitors were studied and analysed with application of various current mechanisms. Analysis reveals that the conduction in Al/TiO2/steel capacitors is governed by Poole-Frenkel mechanism.

  3. X-ray reflectivity analysis of titanium dioxide thin films grown by cathodic arc deposition.

    Science.gov (United States)

    Kleiman, A; Lamas, D G; Craievich, A F; Márquez, A

    2014-05-01

    TiO2 thin films deposited by a vacuum arc on a glass substrate were characterized by X-ray reflectivity (XRR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). Several thin films with different amounts of deposited TiO2 mass and different deposition and annealing temperatures were studied. A qualitative analysis of the XRD patterns indicated the presence of the anatase and/or rutile crystalline phases in most of the studied samples. From the analysis of the experimental XRR curves--which exhibited a wide angular range of oscillatory behavior--the thickness, mass density and interface roughness were determined. All XRR patterns were well fitted by modeled curves that assume the presence of a single and homogeneous TiO2 layer over which a very thin H2O layer is adsorbed. The thickest H2O adsorption layers were developed in films with the highest anatase content. Our overall results of the XRR analyses are consistent with those derived from the imaging techniques (SEM and AFM).

  4. Interdigitated electrode (IDE) for porcine detection based on titanium dioxide (TiO2) thin films

    Science.gov (United States)

    Nordin, N.; Hashim, U.; Azizah, N.

    2016-07-01

    Interdigited Electrode (IDE) porcine detection can be accomplished to authenticate the halal issue that has been a concern to Muslim not only in Malaysia but all around the world. The method used is photolithography that used the p-type photoresist on the spin coater with 2500 rpm. Bare IDEs device is deposited with Titanium Dioxide (TiO2) to improve the performance of the device. The result indicates that current-voltage (I-V) measurement of porcine probe line slightly above porcine target due to negative charges repelled each other. The IDE device can detect the porcine presence in food as lowest as 1.0 µM. Better performance of the device can be achieved with the replacement of gold deposited to trigger more sensitivity of the device.

  5. Magnetism variations and susceptibility hysteresis at the metal-insulator phase transition temperature of VO2 in a composite film containing vanadium and tungsten oxides

    CSIR Research Space (South Africa)

    Akande, AA

    2015-02-01

    Full Text Available We report on the magnetic property of 0.67–WO3+0.33–VOx mixture film deposit on the corning glass substrate using the chemical sol–gel and atmospheric pressure chemical vapour deposition (APCVD) methods. The XRD and Raman spectroscopy confirm...

  6. Effects of a vanadium post-metallocene catalyst-induced polymer backbone inhomogeneity on UV oxidative degradation of the resulting polyethylene film

    KAUST Repository

    Atiqullah, M.

    2012-07-01

    A Group 5 post-metallocene precatalyst, (ONO)VCl(THF) 2 (ONO = a bis(phenolate)pyridine LX 2 pincer ligand), activated with modified methylaluminoxane (MMAO-3A) produced a linear ethylene homopolymer (nm-HomoPE)and an unusual inhomogeneous copolymer (nm-CopolyPE) with 1-hexene having very low backbone unsaturation. The nm-CopolyPE inhomogeneity was reflected in the distributions of short chain branches, 1-hexene composition, and methylene sequence length. The 1-hexene incorporation into the polyethylene backbone strongly depended on the molecular weight of the growing polymer chain. (ONO)VCl(THF) 2, because of site diversity and easier removal of a tertiary (vs. a secondary) hydrogen, produced a skewed short chain branching (SCB) profile, incorporating 1-hexene more efficiently in the low molecular weight region than in the high molecular weight region. The significant decrease in molecular weight by 1-hexene showed that the (ONO)VCl(THF) 2 catalytic sites were also highly responsive to chain-transfer directly to 1-hexene itself, producing vinyl and trans-vinylene termini. Subsequently, the effect of backbone inhomogeneity on the UV oxidative degradation of films made from both polyethylenes was investigated. The major functional group accumulated in the branched nm-CopolyPE film was carbonyl followed by carboxyl, then vinyl/ester, whereas that in the linear nm-HomoPE film was carboxyl. However, (carbonyl, carboxyl, vinyl, and ester) nm-CopolyPE film >> (carboxyl) nm-HomoPE film). The distributions of the tertiary C-H sites and methylene sequence length in the branched nm-CopolyPE film enhanced abstraction of H, decomposition of hydroperoxide group ROOH, and generation of carbonyl compounds as compared with those in the linear nm-HomoPE film. This clearly establishes the role played by the backbone inhomogeneity. The effect of short chain branches and sequence length distributions on peak melting temperature T pm, and most probably lamellar thickness L o, was

  7. Comparisons of the film peeling from the composite oxides of quartz sand filters using ozone, hydrogen peroxide and chlorine dioxide.

    Science.gov (United States)

    Guo, Yingming; Huang, Tinglin; Wen, Gang; Cao, Xin

    2015-08-01

    To solve the problem of shortened backwashing intervals in groundwater plants, several disinfectants including ozone (O3), hydrogen peroxide (H2O2) and chlorine dioxide (ClO2) were examined to peel off the film from the quartz sand surface in four pilot-scale columns. An optimized oxidant dosage and oxidation time were determined by batch tests. Subsequently, the optimized conditions were tested in the four pilot-scale columns. The results demonstrated that the backwashing intervals increased from 35.17 to 54.33 (H2O2) and to 53.67 hr (ClO2) after the oxidation treatments, and the increase of backwashing interval after treatment by O3 was much less than for the other two treatments. Interestingly, the treatment efficiency of filters was not affected by O3 or H2O2 oxidation; but after oxidation by ClO2, the treatment efficiency was deteriorated, especially the ammonia removal (from 96.96% to 24.95%). The filter sands before and after the oxidation were characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. Compared with the oxidation by O3 and H2O2, the structures on the surface of filter sands were seriously damaged after oxidation by ClO2. The chemical states of manganese on the surfaces of those treated sands were only changed by ClO2. The damage of the structures and the change of the chemical states of manganese might have a negative effect on the ammonia removal. In summary, H2O2 is a suitable agent for film peeling. Copyright © 2015. Published by Elsevier B.V.

  8. Assessment of morphology, topography and chemical composition of water-repellent films based on polystyrene/titanium dioxide nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Bolvardi, Beleta [Chemical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Seyfi, Javad, E-mail: Jseyfi@gmail.com [Department of Chemical Engineering, Shahrood Branch, Islamic Azad University, P.O. Box 36155-163, Shahrood (Iran, Islamic Republic of); Hejazi, Iman, E-mail: Imanhe64@gmail.com [Applied Science Nano Research Group, ASNARKA, P.C. 1619948753, Tehran (Iran, Islamic Republic of); Otadi, Maryam [Chemical Engineering Department, Central Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Khonakdar, Hossein Ali [Department of Polymer Engineering, Faculty of Engineering, South Tehran Branch, Islamic Azad University, Tehran (Iran, Islamic Republic of); Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Strasse 6, D-01069 Dresden (Germany); Drechsler, Astrid; Holzschuh, Matthias [Leibniz-Institut für Polymerforschung Dresden e.V., Hohe Strasse 6, D-01069 Dresden (Germany)

    2017-02-28

    Highlights: • Self-cleaning behavior was attained for PS/TiO{sub 2} nanocomposite films. • A modified phase separation process resulted in a hierarchical morphology. • A proper level of uniformity in surface roughness is mandatory for superhydrophobicity. • The required amount of nanoparticles was highly reduced via the presented method. - Abstract: In this study, polystyrene (PS)/titanium dioxide (TiO{sub 2}) films were fabricated through simple solution casting technique via a modified phase separation process. The presented approach resulted in a remarkable reduction in the required amount of nanoparticles for achieving superhydrophobicity. Scanning electron microscopy (SEM) and 3D confocal microscopy were utilized to characterize surface morphology and topography of samples, respectively. An attempt was made to give an in-depth analysis on the surface rough structure using 3D roughness profiles. It was found that high inclusions of non-solvent and nanoparticles resulted in a stable self-cleaning behavior due to the strong presence of hydrophobic TiO{sub 2} nanoparticles on the surface. Quite unexpectedly, low inclusions of nanoparticles and non-solvent also resulted in superhydrophobic property mainly due to the proper level of induced surface roughness. XPS analysis was also utilized to determine the chemical composition of the films’ surfaces. The results of falling drop experiments showed that the sample containing a higher level of nanoparticles had a much lower mechanical resistance against the induced harsh conditions. All in all, the presented method has shown promising potential in fabrication of superhydrophobic surfaces with self-cleaning behavior using the lowest content of nanoparticles.

  9. Leakage current conduction and reliability assessment of passivating thin silicon dioxide films on n-4H-SiC

    Science.gov (United States)

    Samanta, Piyas; Mandal, Krishna C.

    2016-09-01

    We have analyzed the mechanisms of leakage current conduction in passivating silicon dioxide (SiO2) films grown on (0 0 0 1) silicon (Si) face of n-type 4H-SiC (silicon carbide). It was observed that the experimentally measured gate current density in metal-oxide-silicon carbide (MOSiC) structures under positive gate bias at an oxide field Eox above 5 MV/cm is comprised of Fowler-Nordheim (FN) tunneling of electrons from the accumulated n-4H-SiC and Poole-Frenkel (PF) emission of trapped electrons from the localized neutral traps in the SiO2 gap, IFN and IPF, respectively at temperatures between 27 and 200 °C. In MOSiC structures, PF mechanism dominates FN tunneling of electrons from the accumulation layer of n-4H-SiC due to high density (up to 1013 cm-2) of carbon-related acceptor-like traps located at about 2.5 eV below the SiO2 conduction band (CB). These current conduction mechanisms were taken into account in studying hole injection/trapping into 10 nm-thick tunnel oxide on the Si face of 4H-SiC during electron injection from n-4H-SiC under high-field electrical stress with positive bias on the heavily doped n-type polysilicon (n+-polySi) gate at a wide range of temperatures between 27 and 200 °C. Holes were generated in the n+-polySi anode material by the hot-electrons during their transport through thin oxide films at oxide electric fields Eox from 5.6 to 8.0 MV/cm (prior to the intrinsic oxide breakdown field). Time-to-breakdown tBD of the gate dielectric was found to follow reciprocal field (1/E) model irrespective of stress temperatures. Despite the significant amount of process-induced interfacial electron traps contributing to a large amount of leakage current via PF emission in thermally grown SiO2 on the Si-face of n-4H-SiC, MOSiC devices having a 10 nm-thick SiO2 film can be safely used in 5 V TTL logic circuits over a period of 10 years.

  10. Surface modification of polyamide thin film composite membrane by coating of titanium dioxide nanoparticles

    Directory of Open Access Journals (Sweden)

    Thu Hong Anh Ngo

    2016-12-01

    Full Text Available In this paper, the coating of TiO2 nanoparticles onto the surface of a polyamide thin film composite nanofiltration membrane has been studied. Changes in the properties and separation performance of the modified membranes were systematically characterized. The experimental results indicated that the membrane surface hydrophilicity was significantly improved by the presence of the coated TiO2 nanoparticles with subsequent UV irradiation. The separation performance of the UV-irradiated TiO2-coated membranes was improved with a great enhancement of flux and a very high retention for removal of residual dye in an aqueous feed solution. The antifouling property of the UV-irradiated TiO2-coated membranes was enhanced with higher maintained flux ratios and lower irreversible fouling factors compared with an uncoated membrane.

  11. Transformation of porous structure under vacuum ultraviolet irradiation of the films based on silicon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Dultsev, F.N., E-mail: fdultsev@isp.nsc.ru [Institute of Semiconductor Physics SB RAS, Novosibirsk 630090, Lavrentiev ave., 13 (Russian Federation); Novosibirsk State University, 630090, Novosibirsk (Russian Federation); Nekrasov, D.V. [Novosibirsk State University, 630090, Novosibirsk (Russian Federation)

    2016-03-31

    Transformation of the films with the pores of different radii under the action of vacuum ultraviolet radiation was studied experimentally and theoretically. Simulation results showed that Si–O–Si angle depends on pore size. Fourier Transform infrared spectra provide indirect confirmation of this statement. The experimental data and calculation results suggest that methyl group decreases π bonding, which causes a decrease in Si–O–Si angle. The action of ultraviolet radiation is to be considered as a photochemical reaction; the fragments formed in this reaction (CH{sub 3}{sup ⁎}, CH{sub 2}{sup ⁎}) can participate in polymerization, which leads to pore sealing. - Highlights: • Irradiation with the energy of 10–20 eV causes pore sealing. • FTIR studies and simulation results show that Si–O–Si angle depends on pore size. • Fragments formed in photochemical reaction (CH{sub 2}{sup ⁎}) can participate in polymerization. • Polymerization probability is high because the process takes place in closed space.

  12. Titanium Dioxide (TiO2) film as a new saturable absorber for generating mode-locked Thulium-Holmium doped all-fiber laser

    Science.gov (United States)

    Mohd Rusdi, Muhammad Farid; Latiff, Anas Abdul; Paul, Mukul Chandra; Das, Shyamal; Dhar, Anirban; Ahmad, Harith; Harun, Sulaiman Wadi

    2017-03-01

    We report the generation of mode-locked thulium-holmium doped fiber laser (THDFL) at 1979 nm. This is a first demonstration of mode-locked by using Titanium Dioxide (TiO2) film as a saturable absorber (SA). A piece of 1 mm×1 mm TiO2 film was sandwiched in between two fiber ferrule in the cavity. Fabrication process of TiO2 film incorporated a TiO2 and a polyvinyl alcohol (PVA). The stable 9 MHz repetition rate of mode-locked mode operation with 58 dB SNR was generated under pump power of 902-1062 mW. At maximum pump power, the mode-locked THDFL has output power and pulse energy of 15 mW and 1.66 nJ, respectively. Our results demonstrate the TiO2 can be used promisingly in ultrafast photonics applications.

  13. Optimization of fixed titanium dioxide film on PET bottles and visual indicator for water disinfection

    Science.gov (United States)

    Heredia-Munoz, Manuel Antonio

    Water is perhaps the most important resource that sustains human life. According to the World Health Organization (WHO), almost two billion people do not have access to the required water that is needed to satisfy their daily needs and one billion do not have access to clean sources of water for consumption, most of them living in isolated and poor areas around the globe. Poor quality water increases the risk of cholera, typhoid fever and dysentery, and other water-borne illness making this problem a real crisis that humankind is facing. Several water disinfection technologies have been proposed as solutions for this problem. Solar water disinfection using TiO2 coated PET bottles was the alternative that is studied in this work. This technology does not only inactivate bacteria but also disintegrates organic chemicals that can be present in water. The objectives of this work address the optimization of the TiO 2 coated PET bottles technologies. The improvement on the bottle coating process, using two coats of 10% W/V of TiO2 in a solution of vinegar and sodium bicarbonate to form the TiO2 film, the use of a different indigo carmine (1.25 X 10-1mg/pill) concentration in the pill indicator of contamination, the increase of the disinfection rate through shaking the bottles, degradation under intermittent UV radiation and the effect of bottle size on photocatalytic water disinfection were among the most important findings. A new mathematical model that describes better photocatalytic water disinfection in TiO2 coated bottles and simulates water disinfection under different working conditions was another important achievement. These results can now be used to design a strategy for disseminating this technology in areas where it is required and, in that way, generate the greatest positive impact on the people needing safe drinking water.

  14. Titanium dioxide thin films deposited by the sol-gel technique starting from titanium oxy-acetyl acetonate: gas sensing and photocatalyst applications

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado, A.; Mayen-Hernandez, S.A.; L. Olvera, M. de la [Departamento de Ingenieria Electrica-SEES, Centro de Investigacion y de Estudios Avanzados del IPN, CINVESTAV-IPN, Mexico (Mexico); Tirado-Guerra, S. [Escuela Superior de Fisica y Matematicas, Instituto Politecnico Nacional, Mexico (Mexico)

    2010-09-15

    Titanium dioxide (TiO{sub 2}) thin films were deposited onto sodocalcic glass plates by the sol-gel technique, starting from a non-alkoxide route, namely, titanium oxy-acetyl acetonate as Ti precursor. Film thickness effect on both the gas sensing and photocatalytic degradation performance was studied. The as-deposited films were annealed in air at 400 C. All the X-ray spectra of the films show a very broad-peak centered in a 2{theta} angle around 30 . In the case of the thinnest films the surface morphology is uniform and very smooth, whereas for the thickest films the corresponding surface is covered by grains with a rod-like shape with a length on the order of 140 nm. The films were tested both for two straightforward applications: ultraviolet assisted-degradation of methylene blue dissolved in water, at different times, as well as gas sensor in a controlled propane (C{sub 3}H{sub 8}) atmosphere. As the film thickness increases, the degradation of methylene blue (MB) also increases. The thickest TiO{sub 2} thin films after being exposed by 5 hours to the catalytic degradation, promoted by ultraviolet illumination, showed a final MB solution degradation in the order of 48%. This result can be associated with the increase in the effective exposed area of the TiO{sub 2} thin films. On the other hand, the exposition of the films to a controlled propane atmosphere produced a significant change in the surface electrical resistance of the films at operating temperatures of 200 C and above. In fact, in the case of the thickest TiO{sub 2} films, a dramatic electrical resistance change of non-exposed and propane exposed - 560 to 0.7 M{omega} -, was registered. The results show that TiO{sub 2} films deposited by an economical deposition technique, as is the case of the sol-gel technique, could have an important potential in industrial applications. (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  15. Test of vanadium pentoxide as anode for the electrooxidation of toluene

    Energy Technology Data Exchange (ETDEWEB)

    D' Elia, Luis F. [Petroleos de Venezuela (PDVSA)-Intevep, Departamento de Tecnologias Emergentes, Apartado 76343, Caracas 1070-A (Venezuela)]. E-mail: delialf@pdvsa.com; Rincon, L. [Universidad de los Andes, Facultad de Ciencias, Departamento de Quimica, Grupo de Quimica Teorica, Merida 5101 (Venezuela); Ortiz, R. [Universidad de los Andes, Facultad de Ciencias, Departamento de Quimica, Laboratorio de Electroquimica, Merida 5101 (Venezuela)

    2004-11-15

    Vanadium pentoxide (V{sub 2}O{sub 5}) films were prepared by electrochemical and thermal decomposition of vanadyl sulphate on titanium dioxide covered titanium plates and glassy carbon discs. The prepared material by thermal decomposition showed high surface area and good physical stability; while the electrodeposited films, although being homogeneous, showed poor adhesion. The V{sub 2}O{sub 5} electrodes were chemically and electrochemically stable in aqueous (1 M H{sub 2}SO{sub 4} + 1 M NaOH, pH 3) and organic (0.1 M But{sub 4}NPF{sub 6} + CH{sub 3}CN) solutions. In both cases, a well defined electrochemical response was observed. At the experimental conditions, the prepared materials were not active for the electrooxidation of toluene. The theoretical modeling suggests that the lack of activity is due to the weak interaction between toluene and the V{sub 2}O{sub 5} surface.

  16. Vehicle exhaust gas clearance by low temperature plasma-driven nano-titanium dioxide film prepared by radiofrequency magnetron sputtering.

    Directory of Open Access Journals (Sweden)

    Shuang Yu

    Full Text Available A novel plasma-driven catalysis (PDC reactor with special structure was proposed to remove vehicle exhaust gas. The PDC reactor which consisted of three quartz tubes and two copper electrodes was a coaxial dielectric barrier discharge (DBD reactor. The inner and outer electrodes firmly surrounded the outer surface of the corresponding dielectric barrier layer in a spiral way, respectively. Nano-titanium dioxide (TiO2 film prepared by radiofrequency (RF magnetron sputtering was coated on the outer wall of the middle quartz tube, separating the catalyst from the high voltage electrode. The spiral electrodes were designed to avoid overheating of microdischarges inside the PDC reactor. Continuous operation tests indicated that stable performance without deterioration of catalytic activity could last for more than 25 h. To verify the effectiveness of the PDC reactor, a non-thermal plasma(NTP reactor was employed, which has the same structure as the PDC reactor but without the catalyst. The real vehicle exhaust gas was introduced into the PDC reactor and NTP reactor, respectively. After the treatment, compared with the result from NTP, the concentration of HC in the vehicle exhaust gas treated by PDC reactor reduced far more obviously while that of NO decreased only a little. Moreover, this result was explained through optical emission spectrum. The O emission lines can be observed between 870 nm and 960 nm for wavelength in PDC reactor. Together with previous studies, it could be hypothesized that O derived from catalytically O3 destruction by catalyst might make a significant contribution to the much higher HC removal efficiency by PDC reactor. A series of complex chemical reactions caused by the multi-components mixture in real vehicle exhaust reduced NO removal efficiency. A controllable system with a real-time feedback module for the PDC reactor was proposed to further improve the ability of removing real vehicle exhaust gas.

  17. Vehicle Exhaust Gas Clearance by Low Temperature Plasma-Driven Nano-Titanium Dioxide Film Prepared by Radiofrequency Magnetron Sputtering

    Science.gov (United States)

    Yu, Shuang; Liang, Yongdong; Sun, Shujun; Zhang, Kai; Zhang, Jue; Fang, Jing

    2013-01-01

    A novel plasma-driven catalysis (PDC) reactor with special structure was proposed to remove vehicle exhaust gas. The PDC reactor which consisted of three quartz tubes and two copper electrodes was a coaxial dielectric barrier discharge (DBD) reactor. The inner and outer electrodes firmly surrounded the outer surface of the corresponding dielectric barrier layer in a spiral way, respectively. Nano-titanium dioxide (TiO2) film prepared by radiofrequency (RF) magnetron sputtering was coated on the outer wall of the middle quartz tube, separating the catalyst from the high voltage electrode. The spiral electrodes were designed to avoid overheating of microdischarges inside the PDC reactor. Continuous operation tests indicated that stable performance without deterioration of catalytic activity could last for more than 25 h. To verify the effectiveness of the PDC reactor, a non-thermal plasma(NTP) reactor was employed, which has the same structure as the PDC reactor but without the catalyst. The real vehicle exhaust gas was introduced into the PDC reactor and NTP reactor, respectively. After the treatment, compared with the result from NTP, the concentration of HC in the vehicle exhaust gas treated by PDC reactor reduced far more obviously while that of NO decreased only a little. Moreover, this result was explained through optical emission spectrum. The O emission lines can be observed between 870 nm and 960 nm for wavelength in PDC reactor. Together with previous studies, it could be hypothesized that O derived from catalytically O3 destruction by catalyst might make a significant contribution to the much higher HC removal efficiency by PDC reactor. A series of complex chemical reactions caused by the multi-components mixture in real vehicle exhaust reduced NO removal efficiency. A controllable system with a real-time feedback module for the PDC reactor was proposed to further improve the ability of removing real vehicle exhaust gas. PMID:23560062

  18. Acetylene Gas-Sensing Properties of Layer-by-Layer Self-Assembled Ag-Decorated Tin Dioxide/Graphene Nanocomposite Film

    OpenAIRE

    Chuanxing Jiang; Dongzhi Zhang; Nailiang Yin; Yao Yao; Talgar Shaymurat; Xiaoyan Zhou

    2017-01-01

    This paper demonstrates an acetylene gas sensor based on an Ag-decorated tin dioxide/reduced graphene oxide (Ag–SnO2/rGO) nanocomposite film, prepared by layer-by-layer (LbL) self-assembly technology. The as-prepared Ag–SnO2/rGO nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectrum. The acetylene sensing properties were investigated using different working temperatures and gas concentrations. A...

  19. Anomalous behavior of B1g mode in highly transparent anatase nano-crystalline Nb-doped Titanium Dioxide (NTO thin films

    Directory of Open Access Journals (Sweden)

    Subodh K. Gautam

    2015-12-01

    Full Text Available The effect of Niobium doping and size of crystallites on highly transparent nano-crystalline Niobium doped Titanium Dioxide (NTO thin films with stable anatase phase are reported. The Nb doping concentration is varied within the solubility limit in TiO2 lattice. Films were annealed in controlled environment for improving the crystallinity and size of crystallites. Elemental and thickness analysis were carried out using Rutherford backscattering spectrometry and cross sectional field emission scanning electron microscopy. Structural characteristics reveal a substitutional incorporation of Nb+5 in the TiO2 lattice which inhibits the anatase crystallites growth with increasing the doping percentage. The micro-Raman (MR spectra of films with small size crystallites shows stiffening of about 4 cm−1 for the Eg(1 mode and is ascribed to phonon confinement and non-stoichiometry. In contrast, B1g mode exhibits a large anomalous softening of 20 cm−1 with asymmetrical broadening; which was not reported for the case of pure TiO2 crystallites. This anomalous behaviour is explained by contraction of the apical Ti-O bonds at the surface upon substitutional Nb5+ doping induced reduction of Ti4+ ions also known as hetero-coordination effect. The proposed hypotheses is manifested through studying the electronic structure and phonon dynamics by performing the near edge x-ray absorption fine structure (NEXAFS and temperature dependent MR down to liquid nitrogen temperature on pure and 2.5 at.% doped NTO films, respectively.

  20. Photo-catalytic studies of transition metal doped titanium dioxide thin films processed by metalorganic decomposition (MOD) method

    Science.gov (United States)

    Talagala, P.; Marko, X.; Padmanabhan, K. R.; Naik, R.; Rodak, D.; Cheng, Y. T.

    2006-03-01

    We have synthesized pure and transition element (Fe, Co and V) doped Titanium oxide thin films of thickness ˜ 350 nm on sapphire, Si, and stainless steel substrates by Metalorganic Decomposition (MOD) method. The films were subsequently annealed at appropriate temperatures ( 500-750C) to obtain either anatase or the rutile phase of TiO2. Analysis of the composition of the films were performed by energy dispersive X-ray(EDAX) and Rutherford backscattering spectrometry(RBS). Ion channeling was used to identify possible epitaxial growth of the films on sapphire. Both XRD and Raman spectra of the films exhibit that the films annealed at 550C are of anatase phase, while those annealed at 700C seem to prefer a rutile structure. The water contact angle measurements of the films before and after photoactivation, demonstrate a significant reduction in the contact angle for the anatase phase. However, the variation in contact angle was observed for films exposed to UV (<10^o-30^o) and dark (25^o-50^o). Films doped with Fe show a trend towards lower contact angle than those doped with Co. Results with films doped with V will also be included.

  1. Transmission of reactive pulsed laser deposited VO{sub 2} films in the THz domain

    Energy Technology Data Exchange (ETDEWEB)

    Émond, Nicolas; Hendaoui, Ali; Ibrahim, Akram; Al-Naib, Ibraheem; Ozaki, Tsuneyuki; Chaker, Mohamed, E-mail: chaker@emt.inrs.ca

    2016-08-30

    Highlights: • Synthesis of vanadium dioxide (VO{sub 2}) thin films as a function of oxygen pressure (2–25 mTorr) using Reactive Pulsed Laser Deposition (RPLD). • Characterization of RPLD-grown VO{sub 2} thin films in the THz frequency range. • THz switches and/or sensors require VO{sub 2} films deposited at low oxygen pressure (i.e. low transition temperature, large amplitude contrast of THz transmission, narrow hysteresis width). • THz optical memory applications require VO{sub 2} films deposited at high oxygen pressure (broad hysteresis width). - Abstract: This work reports on the characteristics of the insulator-to-metal transition (IMT) of reactive pulsed laser deposited vanadium dioxide (VO{sub 2}) films in the terahertz (THz) frequency range, namely the transition temperature T{sub IMT}, the amplitude contrast of the THz transmission over the IMT ΔA, the transition sharpness ΔT and the hysteresis width ΔH. XRD analysis shows the sole formation of VO{sub 2} monoclinic structure with an enhancement of (011) preferential orientation when varying the O{sub 2} pressure (P{sub O2}) during the deposition process from 2 to 25 mTorr. THz transmission measurements as a function of temperature reveal that VO{sub 2} films obtained at low P{sub O2} exhibit low T{sub IMT}, large ΔA, and narrow ΔH. Increasing P{sub O2} results in VO{sub 2} films with higher T{sub IMT}, smaller ΔA, broader ΔH and asymmetric hysteresis loop. The good control of the VO{sub 2} IMT features in the THz domain could be further exploited for the development of advanced smart devices, such as ultrafast switches, modulators, memories and sensors.

  2. Enhanced optical response of hybridized VO₂/graphene films.

    Science.gov (United States)

    Kim, Hyeongkeun; Kim, Yena; Kim, TaeYoung; Jang, A-Rang; Jeong, Hu Young; Han, Seung Ho; Yoon, Dae Ho; Shin, Hyeon Suk; Bae, Dong Jae; Kim, Keun Soo; Yang, Woo Seok

    2013-04-07

    Application of graphene as transparent electrodes is an active research area due to its excellent electrical and optical properties. Vanadium dioxide (VO2) is an attractive material since it is a thermochromic material that undergoes a structural phase transition when heat is applied. The phase transition results in the change of electrical and optical characteristics. We report optical characteristics of hybrid materials of graphene and VO2. We observed a 12% improvement in infrared transmittance with VO2 films deposited on graphene sapphire substrates compared to that of bare sapphire substrates. We also found that the phase transition temperature decreases as the number of graphene layers on the substrates increases. In the case of VO2 films on the substrate that was coated with four layers of graphene, the mean phase transition temperature was lowered to ∼56 °C.

  3. Nano-phase titanium dioxide thin film deposited by repetitive plasma focus: Ion irradiation and annealing based phase transformation and agglomeration

    Energy Technology Data Exchange (ETDEWEB)

    Rawat, R.S. [Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, NIE BLK7, 1 Nanyang Walk, Singapore 637616 (Singapore)], E-mail: rajdeep.rawat@nie.edu.sg; Aggarwal, V. [Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, NIE BLK7, 1 Nanyang Walk, Singapore 637616 (Singapore); Hassan, M. [Department of Physics, GC University, 54000 Lahore (Pakistan); Lee, P.; Springham, S.V.; Tan, T.L.; Lee, S. [Natural Sciences and Science Education, National Institute of Education, Nanyang Technological University, NIE BLK7, 1 Nanyang Walk, Singapore 637616 (Singapore)

    2008-12-30

    We report the successful deposition of nano-phase crystalline titanium dioxide (TiO{sub 2}) thin films using a repetitive plasma focus device on silicon (Si) substrates at room temperature. The plasma focus device, fitted with solid titanium anode was operated with argon-oxygen admixture as the filling gas. X-ray diffraction (XRD) patterns of as-deposited films confirm the deposition of crystalline TiO{sub 2} thin films having polymorphism nature; anatase and rutile, and their relative phase transition and crystallinity improvement by increasing the number of ion irradiation shots and/or annealing temperature. The crystallite sizes of the TiO{sub 2} particulates estimated from the typical diffraction peaks are found to be approximately 8 nm and 13 nm. The weight ratios of anatase and rutile in the TiO{sub 2} were estimated and it was revealed that anatase weight fraction was reduced by increasing the total ion irradiation and/or annealing temperature, owing to phase the transformation from anatase to rutile. Raman studies have also established the dominant presence of E{sub g} and A{sub 1g} Raman active modes of the rultile phase. Scanning electron micrographs (SEM) of the as-deposited films reveal uniformly distributed nano-phase morphology over the film surface. Agglomeration of smaller TiO{sub 2} nano-sized grains, to form bigger sized particulates, is seen to occur owing to the clustering of charged nucleates in the gas phase. The agglomeration is enhanced by increasing the number of ion irradiation shots and/or annealing temperature.

  4. Light scattering by epitaxial VO{sub 2} films near the metal-insulator transition point

    Energy Technology Data Exchange (ETDEWEB)

    Lysenko, Sergiy, E-mail: sergiy.lysenko@upr.edu; Fernández, Felix; Rúa, Armando; Figueroa, Jose; Vargas, Kevin; Cordero, Joseph [Department of Physics, University of Puerto Rico, Mayaguez, Puerto Rico 00681 (United States); Aparicio, Joaquin [Department of Physics, University of Puerto Rico-Ponce, Ponce, Puerto Rico 00732 (United States); Sepúlveda, Nelson [Department of Electrical and Computer Engineering, Michigan State University, East Lansing, Michigan 48824 (United States)

    2015-05-14

    Experimental observation of metal-insulator transition in epitaxial films of vanadium dioxide is reported. Hemispherical angle-resolved light scattering technique is applied for statistical analysis of the phase transition processes on mesoscale. It is shown that the thermal hysteresis strongly depends on spatial frequency of surface irregularities. The transformation of scattering indicatrix depends on sample morphology and is principally different for the thin films with higher internal elastic strain and for the thicker films where this strain is suppressed by introduction of misfit dislocations. The evolution of scattering indicatrix, fractal dimension, surface power spectral density, and surface autocorrelation function demonstrates distinctive behavior which elucidates the influence of structural defects and strain on thermal hysteresis, twinning of microcrystallites, and domain formation during the phase transition.

  5. Infrared characteristics of VO{sub 2} thin films for smart window and laser protection applications

    Energy Technology Data Exchange (ETDEWEB)

    Huang Zhangli; Chen Sihai; Lv Chaohong; Huang Ying; Lai Jianjun [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2012-11-05

    Vanadium dioxide (VO{sub 2}) films with a low semiconductor-to-metal transition temperature of 45 Degree-Sign C were fabricated through direct current magnetron sputtering followed by a post-annealing. Atomic force microscopy measurements show that the VO{sub 2} grain size is about one hundred of nanometers. Infrared (IR) characteristic is well investigated by applying a He-Ne laser power intensity measurement, and the result reveals that the VO{sub 2} film exhibits excellent IR switching property. Furthermore, solar smart window and laser protection experiments demonstrate that the obtained VO{sub 2} thin film is a promising material for the application in related fields.

  6. Optical nonlinearities of nanostructured VO{sub 2} thin films with low phase transition temperature

    Energy Technology Data Exchange (ETDEWEB)

    Wang Boqing [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Chen Sihai, E-mail: cshai99@163.com [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Huang Zhangli; Fu Ming [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2012-05-01

    Vanadium dioxides (VO{sub 2}) thin films which change from a monoclinic semiconductor phase to a tetragonal metallic structure at the temperature of 29 Degree-Sign C have been fabricated by reactive ion beam sputtering. Micrograph of scanning electron microscope (SEM) shows that the grain size of VO{sub 2} crystallite ranges from 20 nm to 50 nm. Regeneratively amplified Ti:sapphire laser pulses were applied to induce the phase transition, which was accompanying with the third-order optical nonlinearities in VO{sub 2} thin films. Open-aperture and closed-aperture measurements of Z-scan were used to study the optical absorptive and refractive nonlinearities. Nanostructured VO{sub 2} thin films exhibit two-photon absorption and a negative nonlinear index of refraction when phase transition is induced. The optical nonlinearities are due to excitation of electronic subsystem only and without involving of the structural semiconductor-to-metal phase transition.

  7. The Cooling Ability Study on CO2 and O2 Mixed Injection in Vanadium Extraction Process

    Science.gov (United States)

    Li, Pengcheng; Wang, Yu; Du, Wei-Tong; Wen, Gang

    Carbon dioxide could be utilized as a weak oxidant and a kind of coolant to oxidize elements, meanwhile, helping control the temperature during the converter vanadium extraction process. However, the optimum content of CO2 and the cooling effect of CO2 at low content have not been reported. In this study, experimental research based on the influence of different CO2 contents from 0% to 25% injected to the vanadium-containing hot metal was carried out, as well as contrast experiments of O2-N2 mixed blowing. The results indicated that the optimum content of CO2 was 15%. Under the optimum condition, the oxidation of [C] was the lowest and the oxidation rate of [V] was 96.9%, while the temperature was also lower than the O2-N2 mixed blowing. This paper provide a potential property for utilizing CO2 during the converter vanadium extraction process.

  8. Catalytic oxidations by vanadium complexes

    NARCIS (Netherlands)

    Ligtenbarg, A.G J; Hage, R.; Feringa, B.L.

    Vanadium haloperoxidases catalyse the oxidation of halides leading to halogenation of substrates or, in the absence of suitable substrates, to oxidation of hydrogen peroxide into singlet oxygen and water. Furthermore, V-haloperoxidases are capable to give enantioselective sulfoxidation under the

  9. Vanadium Compounds as PTP Inhibitors

    Directory of Open Access Journals (Sweden)

    Elsa Irving

    2017-12-01

    Full Text Available Phosphotyrosine signaling is regulated by the opposing actions of protein tyrosine kinases (PTKs and protein tyrosine phosphatases (PTPs. Here we discuss the potential of vanadium derivatives as PTP enzyme inhibitors and metallotherapeutics. We describe how vanadate in the V oxidized state is thought to inhibit PTPs, thus acting as a pan-inhibitor of this enzyme superfamily. We discuss recent developments in the biological and biochemical actions of more complex vanadium derivatives, including decavanadate and in particular the growing number of oxidovanadium compounds with organic ligands. Pre-clinical studies involving these compounds are discussed in the anti-diabetic and anti-cancer contexts. Although in many cases PTP inhibition has been implicated, it is also clear that many such compounds have further biochemical effects in cells. There also remain concerns surrounding off-target toxicities and long-term use of vanadium compounds in vivo in humans, hindering their progress through clinical trials. Despite these current misgivings, interest in these chemicals continues and many believe they could still have therapeutic potential. If so, we argue that this field would benefit from greater focus on improving the delivery and tissue targeting of vanadium compounds in order to minimize off-target toxicities. This may then harness their full therapeutic potential.

  10. Characterization of vanadium flow battery

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, H.; Ekman, C.; Gehrke, O.; Isleifsson, F.

    2010-10-15

    This report summarizes the work done at Risoe DTU testing a vanadium flow battery as part of the project 'Characterisation of Vanadium Batteries' (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risoe DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses are power conversion in cell stacks/electrolyte, power converter, and auxiliary power consumption from pumps and controller. The response time for the battery is limited at 20kW/s by the ramp rate of the power converter. The battery can thus provide power and frequency support for the power system. Vanadium battery is a potential technology for storage based services to the power system provided investment and O and M cost are low enough and long term operation is documented. (Author)

  11. [An in vitro study on toxic effect of vanadium-titanium-magnetite dust on alveolar macrophage in rabbits].

    Science.gov (United States)

    Song, Y; Chen, Q; Guan, Y

    1998-11-01

    To study the toxic effect of vanadium-titanium-magnetite (VTM) dust on alveolar macrophage (AM) and its hazardous extent. Survival rates, morphology and function of AM were compared in rabbits exposed to dust of VTM, vanadium oxide, titanium dioxide and silica in various doses and length of time with in vitro cell culture and putamen membrane cover glass transmission electron microscopy, and changes in activities of lactic dehydrogenase (LDH) and acid phosphatase (ACP) in cell culture were measured. Exposure to all the four kinds of dust could lead to decrease in survival rate of AM, increase in activities of LDH and ACP in the cell culture, and changes in their morphology and function to the extent dependent on the nature of dust. Toxic effect of exposure to VTM dust was lower than that to vanadium oxide and silica, but higher than that to titanium dioxide, which had slight toxic effect.

  12. Theoretical analysis of surface acoustic wave propagating properties of Y-cut nano lithium niobate film on silicon dioxide

    Science.gov (United States)

    Chen, Jing; Zhang, Qiaozhen; Han, Tao; Zhou, Liu; Tang, Gongbin; Liu, Boquan; Ji, Xiaojun

    2015-08-01

    The surface acoustic wave (SAW) propagating characteristics of Y-cut nano LiNbO3 (LN) film on SiO2/LN substrate have been theoretically calculated. The simulated results showed a shear horizontal (SH) SAW with enhanced electromechanical coupling factor K2 owing to a dimensional effect of the nanoscale LN film. However, a Rayleigh SAW and two other resonances related to thickness vibrations caused spurious responses for wideband SAW devices. These spurious waves could be fully suppressed by properly controlling structural parameters including the electrode layer height, thickness, and the Euler angle (θ) of the LN thin film. Finally, a pure SH SAW was obtained with a wide θ range, from 0° to 5° and 165° to 180°. The largest K2 achieved for the pure SH SAW was about 35.1%. The calculated results demonstrate the promising application of nano LN film to the realization of ultra-wideband SAW devices.

  13. A new sensor for ammonia based on cyanidin-sensitized titanium dioxide film operating at room temperature

    Energy Technology Data Exchange (ETDEWEB)

    Xiao-wei, Huang [School of Food and Biological Engineering, Jiangsu University, 301 Xuefu Road, 212013 Zhenjiang, Jiangsu (China); Xiao-bo, Zou, E-mail: zou_xiaobo@ujs.edu.cn [School of Food and Biological Engineering, Jiangsu University, 301 Xuefu Road, 212013 Zhenjiang, Jiangsu (China); Key Laboratory of Modern Agricultural Equipment and Technology, 301 Xuefu Road, 212013 Zhenjiang, Jiangsu (China); Ji-yong, Shi; Jie-wen, Zhao; Yanxiao, Li [School of Food and Biological Engineering, Jiangsu University, 301 Xuefu Road, 212013 Zhenjiang, Jiangsu (China); Limin, Hao; Jianchun, Zhang [The Research Center of China Hemp Materials, Beijing (China)

    2013-07-17

    Graphical abstract: -- Highlights: •TiO{sub 2} was prepared by sol–gel method film and then functionalized with the cyanidin dye. •The morphology and the absorption spectra of films were examined. •The hybrid organic–inorganic formed film here can detect ammonia reversibly at room temperature. •The low humidity could promote the sensitivity of the sensors. -- Abstract: Design and fabrication of an ammonia sensor operating at room temperature based on pigment-sensitized TiO{sub 2} films was described. TiO{sub 2} was prepared by sol–gel method and deposited on glass slides containing gold electrodes. Then, the film immersed in a 2.5 × 10{sup −4} M ethanol solution of cyanidin to absorb the pigment. The hybrid organic–inorganic formed film here can detect ammonia reversibly at room temperature. The relative change resistance of the films at a potential difference of 1.5 V is determined when the films are exposed to atmospheres containing ammonia vapors with concentrations over the range 10–50 ppm. The relative change resistance, S, of the films increased almost linearly with increasing concentrations of ammonia (r = 0.92). The response time to increasing concentrations of the ammonia is about 180–220 s, and the corresponding values for decreasing concentrations 240–270 s. At low humidity, ammonia could be ionized by the cyanidin on the TiO{sub 2} film and thereby decrease in the proton concentration at the surface. Consequently, more positively charged holes at the surface of the TiO{sub 2} have to be extracted to neutralize the adsorbed cyanidin and water film. The resistance response to ammonia of the sensors was nearly independent on temperature from 10 to 50 °C. These results are not actually as good as those reported in the literature, but this preliminary work proposes simpler and cheaper processes to realize NH{sub 3} sensor for room temperature applications.

  14. Swift heavy ion irradiation induced phase transformation in undoped and niobium doped titanium dioxide composite thin films

    Energy Technology Data Exchange (ETDEWEB)

    Gautam, Subodh K., E-mail: subodhkgtm@gmail.com [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110 067 (India); Chettah, Abdelhak [LGMM Laboratory, Université 20 Août 1955-Skikda, BP 26, 21000 Skikda (Algeria); Singh, R.G. [Department of Physics, Bhagini Nivedita College, Delhi University, Delhi 110043 (India); Ojha, Sunil; Singh, Fouran [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110 067 (India)

    2016-07-15

    Study reports the effect of swift heavy ion (SHI) irradiation induced phase transformation in undoped and Niobium doped anatase TiO{sub 2} composite thin films. Investigations were carried out at different densities of electronic excitations (EEs) using 120 MeV Ag and 130 MeV Ni ions irradiations. Films were initially annealed at 900 °C and results revealed that undoped films were highly stable in anatase phase, while the Nb doped films showed the composite nature with the weak presence of Niobium penta-oxide (Nb{sub 2}O{sub 5}) phase. The effect at low density of EEs in undoped film show partial anatase to rutile phase transformation; however doped film shows only further growth of Nb{sub 2}O{sub 5} phase beside the anatase to rutile phase transformation. At higher density of EEs induced by Ag ions, registered continuous ion track of ∼3 nm in lattice which leads to nano-crystallization followed by decomposition/amorphization of rutile TiO{sub 2} and Nb{sub 2}O{sub 5} phases in undoped and doped films, respectively. However, Ni ions are only induced discontinuous sequence of ion tracks with creation of damage and disorder and do not show amorphization in the lattice. The in-elastic thermal spike calculations were carried out for anatase TiO{sub 2} phase to understand the effect of EEs on anatase to rutile phase transformation followed by amorphization in NTO films in terms of continuous and discontinuous track formation by SHI irradiation.

  15. A new sensor for ammonia based on cyanidin-sensitized titanium dioxide film operating at room temperature.

    Science.gov (United States)

    Huang, Xiao-wei; Zou, Xiao-bo; Shi, Ji-yong; Zhao, Jie-wen; Li, Yanxiao; Hao, Limin; Zhang, Jianchun

    2013-07-17

    Design and fabrication of an ammonia sensor operating at room temperature based on pigment-sensitized TiO2 films was described. TiO2 was prepared by sol-gel method and deposited on glass slides containing gold electrodes. Then, the film immersed in a 2.5×10(-4)M ethanol solution of cyanidin to absorb the pigment. The hybrid organic-inorganic formed film here can detect ammonia reversibly at room temperature. The relative change resistance of the films at a potential difference of 1.5V is determined when the films are exposed to atmospheres containing ammonia vapors with concentrations over the range 10-50 ppm. The relative change resistance, S, of the films increased almost linearly with increasing concentrations of ammonia (r=0.92). The response time to increasing concentrations of the ammonia is about 180-220 s, and the corresponding values for decreasing concentrations 240-270 s. At low humidity, ammonia could be ionized by the cyanidin on the TiO2 film and thereby decrease in the proton concentration at the surface. Consequently, more positively charged holes at the surface of the TiO2 have to be extracted to neutralize the adsorbed cyanidin and water film. The resistance response to ammonia of the sensors was nearly independent on temperature from 10 to 50°C. These results are not actually as good as those reported in the literature, but this preliminary work proposes simpler and cheaper processes to realize NH3 sensor for room temperature applications. Copyright © 2013 Elsevier B.V. All rights reserved.

  16. Study on photocatalytic performance of cerium-graphene oxide-titanium dioxide composite film for formaldehyde removal

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jia; Zhang, Quan [The Civil Engineering College of Hunan University, Changsha (China); Lai, Alvin C.K. [Department of Civil and Architectural Engineering, City University of Hong Kong, Kowloon (China); Zeng, Liping [Department of Building Engineering of Hunan Institute of Engineering, Xiangtan (China)

    2016-12-15

    In order to degrade in-car formaldehyde gas, graphene oxide (GO), cerium (Ce), and TiO{sub 2} were organically combined by one-step sol-gel method. Then the mixed collosol was coated onto the surface of inorganic glass substrates to form Ce-GO-TiO{sub 2} composite film by way of immersion, coating, and calcinations. The morphology and crystal structure of as-prepared Ce-GO-TiO{sub 2} film were studied by a series of detection techniques. The photocatalytic performance of this film was analyzed by the degradation effect of formaldehyde under simulated sunlight. The results showed that the Ce-GO-TiO{sub 2} film had the inbuilt mesoporous structure in the lamellar stacking with particles. When the doping amount of Ce and GO were 0.4 and 0.2% (mass ratio), the composite film can improve effectively the response to the visible light and its degradation rate for low concentration of formaldehyde was up to 83.8% in simulated sunlight for 7 h, which could be attributed to the co-function of Ce and GO. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. Improved electrochemical immunosensor for myeloperoxidase in human serum based on nanogold/cerium dioxide-BMIMPF6/L-Cysteine composite film.

    Science.gov (United States)

    Lu, Lingsong; Liu, Bei; Li, Shenfeng; Zhang, Wei; Xie, Guoming

    2011-09-01

    An electrochemical immunosensing assay for myeloperoxidase (MPO) determination in human serum has been developed. Firstly, L-Cysteine was initially electropolymerized on an Au electrode to form L-Cysteine film. After that cerium dioxide (CeO2) dispersed in 1-butyl-3-methylimidazolium hexafluorophosphate (BMIMPF6) were immobilized on the L-Cysteine film. Then the negatively charged nanogold particles were adsorbed onto the membrane via the positive charge of CeO2, which aimed at assembling more antibody of MPO (anti-MPO). The resulting immunosensor showed a high sensitivity, broad linear response to the MPO concentration comprised between 10 ng/mL and 400 ng/mL with a detection limit of 0.06 ng/mL. Moreover, the surface morphology of the electrode was studied by means of a scanning electron microscope and the electrochemical properties of the fabricated immunosensor were further characterized by cyclic voltammetry. Also, factors influencing the performance of the resulting immunosensors were studied in detail. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. Acetylene Gas-Sensing Properties of Layer-by-Layer Self-Assembled Ag-Decorated Tin Dioxide/Graphene Nanocomposite Film

    Science.gov (United States)

    Jiang, Chuanxing; Yin, Nailiang; Yao, Yao; Shaymurat, Talgar; Zhou, Xiaoyan

    2017-01-01

    This paper demonstrates an acetylene gas sensor based on an Ag-decorated tin dioxide/reduced graphene oxide (Ag–SnO2/rGO) nanocomposite film, prepared by layer-by-layer (LbL) self-assembly technology. The as-prepared Ag–SnO2/rGO nanocomposite was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Raman spectrum. The acetylene sensing properties were investigated using different working temperatures and gas concentrations. An optimal temperature of 90 °C was determined, and the Ag–SnO2/rGO nanocomposite sensor exhibited excellent sensing behaviors towards acetylene, in terms of response, repeatability, stability and response/recovery characteristics, which were superior to the pure SnO2 and SnO2/rGO film sensors. The sensing mechanism of the Ag–SnO2/rGO sensor was attributed to the synergistic effect of the ternary nanomaterials, and the heterojunctions created at the interfaces between SnO2 and rGO. This work indicates that the Ag–SnO2/rGO nanocomposite is a good candidate for constructing a low-temperature acetylene sensor. PMID:28927021

  19. Acetylene Gas-Sensing Properties of Layer-by-Layer Self-Assembled Ag-Decorated Tin Dioxide/Graphene Nanocomposite Film

    Directory of Open Access Journals (Sweden)

    Chuanxing Jiang

    2017-09-01

    Full Text Available This paper demonstrates an acetylene gas sensor based on an Ag-decorated tin dioxide/reduced graphene oxide (Ag–SnO2/rGO nanocomposite film, prepared by layer-by-layer (LbL self-assembly technology. The as-prepared Ag–SnO2/rGO nanocomposite was characterized by scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray diffraction (XRD and Raman spectrum. The acetylene sensing properties were investigated using different working temperatures and gas concentrations. An optimal temperature of 90 °C was determined, and the Ag–SnO2/rGO nanocomposite sensor exhibited excellent sensing behaviors towards acetylene, in terms of response, repeatability, stability and response/recovery characteristics, which were superior to the pure SnO2 and SnO2/rGO film sensors. The sensing mechanism of the Ag–SnO2/rGO sensor was attributed to the synergistic effect of the ternary nanomaterials, and the heterojunctions created at the interfaces between SnO2 and rGO. This work indicates that the Ag–SnO2/rGO nanocomposite is a good candidate for constructing a low-temperature acetylene sensor.

  20. [The vanadium compounds: chemistry, synthesis, insulinomimetic properties].

    Science.gov (United States)

    Fedorova, E V; Buriakina, A V; Vorob'eva, N M; Baranova, N I

    2014-01-01

    The review considers the biological role of vanadium, its participation in various processes in humans and other mammals, and the anti-diabetic effect of its compounds. Vanadium salts have persistent hypoglycemic and antihyperlipidemic effects and reduce the probability of secondary complications in animals with experimental diabetes. The review contains a detailed description of all major synthesized vanadium complexes having antidiabetic activity. Currently, vanadium complexes with organic ligands are more effective and safer than the inorganic salts. Despite the proven efficacy of these compounds as the anti-diabetic agents in animal models, only one organic complex of vanadium is currently under the second phase of clinical trials. All of the considered data suggest that vanadium compound are a new promising class of drugs in modern pharmacotherapy of diabetes.

  1. Vanadium pentoxide nanoparticles mimic vanadium haloperoxidases and thwart biofilm formation

    Science.gov (United States)

    Natalio, Filipe; André, Rute; Hartog, Aloysius F.; Stoll, Brigitte; Jochum, Klaus Peter; Wever, Ron; Tremel, Wolfgang

    2012-08-01

    Marine biofouling--the colonization of small marine microorganisms on surfaces that are directly exposed to seawater, such as ships' hulls--is an expensive problem that is currently without an environmentally compatible solution. Biofouling leads to increased hydrodynamic drag, which, in turn, causes increased fuel consumption and greenhouse gas emissions. Tributyltin-free antifouling coatings and paints based on metal complexes or biocides have been shown to efficiently prevent marine biofouling. However, these materials can damage the environment through metal leaching (for example, of copper and zinc) and bacteria resistance. Here, we show that vanadium pentoxide nanowires act like naturally occurring vanadium haloperoxidases to prevent marine biofouling. In the presence of bromide ions and hydrogen peroxide, the nanowires catalyse the oxidation of bromide ions to hypobromous acid (HOBr). Singlet molecular oxygen (1O2) is formed and this exerts strong antibacterial activity, which prevents marine biofouling without being toxic to marine biota. Vanadium pentoxide nanowires have the potential to be an alternative approach to conventional anti-biofouling agents.

  2. A functionalized surface modification with vanadium nanoparticles of various valences against implant-associated bloodstream infection.

    Science.gov (United States)

    Wang, Jiaxing; Zhou, Huaijuan; Guo, Geyong; Cheng, Tao; Peng, Xiaochun; Mao, Xin; Li, Jinhua; Zhang, Xianlong

    2017-01-01

    Bloodstream infection, especially with implants involved, is an often life-threatening condition with high mortality rates, imposing a heavy burden on patients and medical systems. Herein, we firstly deposited homogeneous vanadium metal, V2O3, VO2, and V2O5 nanofilms on quartz glass by magnetron sputtering. Using these platforms, we further investigated the potential antimicrobial efficiency of these nano-VOx films and the interactions of human erythrocytes and bacteria (methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa) with our samples in a novel cell-bacteria coculture model. It was demonstrated that these nano-VOx precipitated favorable antibacterial activity on both bacteria, especially on S. aureus, and this effect increased with higher vanadium valence. A possible mechanism accountable for these results might be elevated levels of vanadium-induced intracellular reactive oxygen species. More importantly, based on hemolysis assays, our nano-VOx films were found to be able to kill prokaryotic cells but were not toxic to mammalian cells, holding the potential for the prevention of implant-related hematogenous infections. As far as we know, this is the first report wherein such nano-VOx films have assisted human erythrocytes to combat bacteria in a valence-dependent manner. Additionally, vanadium ions were released from these nano-VOx films in a sustained manner, and low-valence films possessed better biocompatibility with human fibroblasts. This work may provide new insights for biomedical applications of inorganic vanadium compounds and attract growing attention in this field. From the perspective of surface modification and functionalization, this study holds promise to avail the prophylaxis of bloodstream infections involving implantable biomedical devices.

  3. Amphoteric Ion-Exchange Membranes with Significantly Improved Vanadium Barrier Properties for All-Vanadium Redox Flow Batteries.

    Science.gov (United States)

    Nibel, Olga; Rojek, Tomasz; Schmidt, Thomas J; Gubler, Lorenz

    2017-07-10

    All-vanadium redox flow batteries (VRBs) have attracted considerable interest as promising energy-storage devices that can allow the efficient utilization of renewable energy sources. The membrane, which separates the porous electrodes in a redox flow cell, is one of the key components in VRBs. High rates of crossover of vanadium ions and water through the membrane impair the efficiency and capacity of a VRB. Thus, membranes with low permeation rate of vanadium species and water are required, also characterized by low resistance and stability in the VRB environment. Here, we present a new design concept for amphoteric ion-exchange membranes, based on radiation-induced grafting of vinylpyridine into an ethylene tetrafluoroethylene base film and a two-step functionalization to introduce cationic and anionic exchange sites, respectively. During long-term cycling, redox flow cells containing these membranes showed higher efficiency, less pronounced electrolyte imbalance, and significantly reduced capacity decay compared to the cells with the benchmark material Nafion 117. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Characterization of Vanadium Flow Battery

    DEFF Research Database (Denmark)

    Bindner, Henrik W.; Krog Ekman, Claus; Gehrke, Oliver

    This report summarizes the work done at Risø-DTU testing a vanadium flow battery as part of the project “Characterisation of Vanadium Batteries” (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery...... has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risø DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration...... of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses...

  5. Structural Modification of Sol-Gel Synthesized V2O5 and TiO2 Thin Films with/without Erbium Doping

    Directory of Open Access Journals (Sweden)

    Fatma Pınar Gökdemir

    2014-01-01

    Full Text Available Comparative work of with/without erbium- (Er- doped vanadium pentoxide (V2O5 and titanium dioxide (TiO2 thin films were carried out via sol-gel technique by dissolving erbium (III nitrate pentahydrate (Er(NO33·5H2O in vanadium (V oxoisopropoxide (OV[OCH(CH32]3 and titanium (IV isopropoxide (Ti[OCH(CH32]4. Effect of Er doping was traced by Fourier transform IR (FTIR, thermogravimetric/differential thermal (TG/DTA, and photoluminescence measurements. UV-Vis transmission/absorption measurement indicated a blue shift upon Er doping in V2O5 film due to the softening of V=O bond while appearance of typical absorption peaks in Er-doped TiO2 film. Granule size of the films increased (reduced upon Er substitution on host material compared to undoped V2O5 and TiO2 films, respectively.

  6. Leaching characteristics of vanadium in mine tailings and soils near a vanadium titanomagnetite mining site.

    Science.gov (United States)

    Yang, Jinyan; Tang, Ya; Yang, Kai; Rouff, Ashaki A; Elzinga, Evert J; Huang, Jen-How

    2014-01-15

    A series of column leaching experiments were performed to understand the leaching behaviour and the potential environmental risk of vanadium in a Panzhihua soil and vanadium titanomagnetite mine tailings. Results from sequential extraction experiments indicated that the mobility of vanadium in both the soil and the mine tailings was low, with vanadium readily mobilised. Column experiments revealed that only vanadium in the soil and mine tailing was leachable. The vanadium concentrations in the soil leachates did not vary considerably, but decreased with the leachate volume in the mine tailing leachates. This suggests that there was a smaller pool of leachable vanadium in the mine tailings compared to that in the soil. Drought and rewetting increased the vanadium concentrations in the soil and mine tailing leachates from 20μgL(-1) to 50-90μgL(-1), indicating the potential for high vanadium release following periods of drought. Experiments with soil columns overlain with 4, 8 and 20% volume mine tailings/volume soil exhibited very similar vanadium leaching behaviour. These results suggest that the transport of vanadium to the subsurface is controlled primarily by the leaching processes occurring in soils. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Effective Carbon Dioxide Photoreduction over Metals (Fe-, Co-, Ni-, and Cu- Incorporated TiO2/Basalt Fiber Films

    Directory of Open Access Journals (Sweden)

    Jeong Yeon Do

    2016-01-01

    Full Text Available Mineralogical basalt fibers as a complementary adsorbent were introduced to improve the adsorption of CO2 over the surfaces of photocatalysts. TiO2 photocatalysts (M-TiO2 incorporated with 5.0 mol.% 3d-transition metals (Fe, Co, Ni, and Cu were prepared using a solvothermal method and mixed with basalt fibers for applications to CO2 photoreduction. The resulting 5.0 mol.% M-TiO2 powders were characterized by X-ray diffraction, scanning electron microscopy, ultraviolet-visible spectroscopy, photoluminescence, Brunauer, Emmett, and Teller surface area, and CO2-temperature-programmed desorption. A paste composed of two materials was coated and fixed on a Pyrex plate by a thermal treatment. The 5.0 mol.% M-TiO2/basalt fiber films increased the adsorption of CO2 significantly, indicating superior photocatalytic behavior compared to pure TiO2 and basalt fiber films, and produced 158~360 μmol gcat-1 L−1 CH4 gases after an 8 h reaction. In particular, the best performance was observed over the 5.0 mol.% Co-TiO2/basalt fiber film. These results were attributed to the effective CO2 gas adsorption and inhibition of photogenerated electron-hole pair recombination.

  8. Interdigitated electrode (IDE) for porcine detection based on titanium dioxide (TiO{sub 2}) thin films

    Energy Technology Data Exchange (ETDEWEB)

    Nordin, N.; Azizah, N. [Institute of Electronic Engineering (INEE), Universiti Malaysia Perlis, 01000 Kangar Perlis (Malaysia); Hashim, U., E-mail: uda@unimap.edu.my [Institute of Electronic Engineering (INEE), Universiti Malaysia Perlis, 01000 Kangar Perlis (Malaysia); School of Microelctronic Engineering, Universiti Malaysia Perlis, 01000 Kangar Perlis (Malaysia)

    2016-07-06

    Interdigited Electrode (IDE) porcine detection can be accomplished to authenticate the halal issue that has been a concern to Muslim not only in Malaysia but all around the world. The method used is photolithography that used the p-type photoresist on the spin coater with 2500 rpm. Bare IDEs device is deposited with Titanium Dioxide (TiO{sub 2}) to improve the performance of the device. The result indicates that current-voltage (I-V) measurement of porcine probe line slightly above porcine target due to negative charges repelled each other. The IDE device can detect the porcine presence in food as lowest as 1.0 µM. Better performance of the device can be achieved with the replacement of gold deposited to trigger more sensitivity of the device.

  9. Titanium dioxide-gold nanocomposite materials embedded in silicate sol-gel film catalyst for simultaneous photodegradation of hexavalent chromium and methylene blue

    Energy Technology Data Exchange (ETDEWEB)

    Pandikumar, Alagarsamy [Centre for Photoelectrochemistry, School of Chemistry, Madurai Kamaraj University, Madurai 625021 (India); Ramaraj, Ramasamy, E-mail: ramarajr@yahoo.com [Centre for Photoelectrochemistry, School of Chemistry, Madurai Kamaraj University, Madurai 625021 (India)

    2012-02-15

    Graphical abstract: Aminosilicate sol-gel supported TiO{sub 2}-Au nanocomposite material photocatalyst was prepared by deposition-precipitation method and used for the simultaneous oxidation and reduction of methyelene blue dye and Cr(VI) ions. Highlights: Black-Right-Pointing-Pointer The EDAS/(TiO{sub 2}-Au){sub nps} is used to design the solid-phase thin film photocatalyst. Black-Right-Pointing-Pointer Au promotes the interfacial electron transfer from TiO{sub 2} to Cr(VI) to form Cr(III). Black-Right-Pointing-Pointer The holes produced at the TiO{sub 2} oxidize the MB dye. Black-Right-Pointing-Pointer The EDAS/(TiO{sub 2}-Au){sub nps} film was used for the simultaneous oxidation and reduction of toxic molecules. Black-Right-Pointing-Pointer The photoinduced simultaneous redox process provides dual benefit for the environment remediation. - Abstract: Aminosilicate sol-gel supported titanium dioxide-gold (EDAS/(TiO{sub 2}-Au){sub nps}) nanocomposite materials were synthesized by simple deposition-precipitation method and characterized. The photocatalytic oxidation and reduction activity of the EDAS/(TiO{sub 2}-Au){sub nps} film was evaluated using hexavalent chromium (Cr(VI)) and methylene blue (MB) dye under irradiation. The photocatalytic reduction of Cr(VI) to Cr(III) was studied in the presence of hole scavengers such as oxalic acid (OA) and methylene blue (MB). The photocatalytic degradation of MB was investigated in the presence and absence of Cr(VI). Presence of Au{sub nps} on the (TiO{sub 2}){sub nps} surface and its dispersion in the silicate sol-gel film (EDAS/(TiO{sub 2}-Au){sub nps}) improved the photocatalytic reduction of Cr(VI) and oxidation of MB due to the effective interfacial electron transfer from the conduction band of the TiO{sub 2} to Au{sub nps} by minimizing the charge recombination process when compared to the TiO{sub 2} and (TiO{sub 2}-Au){sub nps} in the absence of EDAS. The EDAS/(TiO{sub 2}-Au){sub nps} nanocomposite materials provided

  10. Equivalent circuit for VO{sub 2} phase change material film in reconfigurable frequency selective surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Sanphuang, Varittha; Ghalichechian, Nima; Nahar, Niru K.; Volakis, John L. [Department of Electrical and Computer Engineering, ElectroScience Laboratory, The Ohio State University, Columbus, Ohio 43212 (United States)

    2015-12-21

    We developed equivalent circuits of phase change materials based on vanadium dioxide (VO{sub 2}) thin films. These circuits are used to model VO{sub 2} thin films for reconfigurable frequency selective surfaces (FSSs). This is important as it provides a way for designing complex structures. A reconfigurable FSS filter using VO{sub 2} ON/OFF switches is designed demonstrating −60 dB isolation between the states. This filter is used to provide the transmission and reflection responses of the FSS in the frequency range of 0.1–0.6 THz. The comparison between equivalent circuit and full-wave simulation shows excellent agreement.

  11. Hybrid thin-film solar cells comprising mesoporous titanium dioxide and conjugated polymers; Hybride Duennschicht-Solarzellen aus mesoporoesem Titandioxid und konjugierten Polymeren

    Energy Technology Data Exchange (ETDEWEB)

    Schattauer, Sylvia

    2010-12-01

    The main objective of this thesis is to study the active components and their interactions in so called organic hybrid solar cells. These consist of a thin inorganic titanium dioxide layer, combined with a polymer layer. In general, the efficiency of these hybrid solar cells is determined by the light absorption in the donor polymer, the dissociation of excitons at the heterojunction between TiO{sub 2} and polymer, as well as the generation and extraction of free charge carriers. To optimize the solar cells, the physical interactions between the materials are modified and the influences of various preparation parameters are systematically investigated. Among others, important findings regarding the optimal use of materials and preparation conditions as well as detailed investigations of fundamental factors such as film morphology and polymer infiltration are presented in more detail. First, a variety of titanium dioxide layer were produced, from which a selection for use in hybrid solar cells was made. The obtained films show differences in surface structure, film morphology and crystallinity, depending on the way how the TiO{sub 2} layer has been prepared. All these properties of the TiO{sub 2} films may strongly affect the performance of the hybrid solar cells, by influencing e.g. the exciton diffusion length, the efficiency of exciton dissociation at the hybrid interface, and the carrier transport properties. Detailed investigations were made for mesoporous TiO{sub 2} layer following a new nanoparticle synthesis route, which allows to produce crystalline particles during the synthesis. As donor component, conjugated polymers, either derivatives of cyclohexylamino-poly(p-phenylene vinylene) (PPV) or a thiophene are used. The preparation routine also includes a thermal treatment of the TiO{sub 2} layers, revealing a temperature-dependent change in morphology, but not of the crystal structure. The effects on the solar cell properties have been documented and

  12. The future of/for vanadium.

    Science.gov (United States)

    Rehder, Dieter

    2013-09-07

    Vanadium compounds are stored or employed by several groups of bacterial and eukaryotic organisms. Two types of vanadium-dependent enzymes have so far been characterised: vanadate-dependent haloperoxidases from fungi, lichens, marine macroalgae and Streptomyces bacteria, and vanadium nitrogenases in proteo- and cyanobacteria. Several bacterial strains can employ vanadate(V) as an external electron acceptor in respiration, reducing vanadate to VO(2+) and thus contributing to the mineralisation of vanadium and to the detoxification of vanadate-contaminated water. Amanita mushrooms and many sea squirts accumulate vanadium, without the importance of this practise being well understood. Further, the analogy between vanadate and phosphate implicates an interference of vanadate with metabolic processes involving phosphate, suggesting a regulatory role for vanadate in most if not all organisms, including humans, but also hinting at toxic effects at unphysiologically high vanadate concentrations. The antidiabetic effect of vanadium compounds is probably related to the phosphate-vanadate antagonism, as is the potentiality of vanadate in the amelioration of cardiovascular affliction. The anti-cancer action of vanadium compounds and their in vitro activity towards the protozoa causing amoebiasis, leishmaniasis and Chagas' disease again may be rooted in the intervention of vanadate with the activity of phosphatases and kinases. In addition, most likely the ability of vanadate(V) and oxidovanadium(IV) to regulate the cellular production of reactive oxygen species comes in, thus influencing cellular signalling. Future developments of vanadium chemistry are likely to emphasize topics related to biological, environmental and medicinal aspects. Condensation of monovanadate results in the formation of oligovanadates, polyvanadates and finally colloidal and solid vanadium oxides that, in part, convey bio-mimetic functions comparable to those of simple vanadate, including its catalytic

  13. Single-crystalline vanadium dioxide nanowires with rectangular cross sections.

    Science.gov (United States)

    Guiton, Beth S; Gu, Qian; Prieto, Amy L; Gudiksen, Mark S; Park, Hongkun

    2005-01-19

    We report the synthesis of single-crystalline VO2 nanowires with rectangular cross sections using a vapor transport method. These nanowires have typical diameters of 60 (+/-30) nm and lengths up to >10 mum. Electron microscopy and diffraction measurements show that the VO2 nanowires are single crystalline and exhibit a monoclinic structure. Moreover, they preferentially grow along the [100] direction and are bounded by the (01) and (011) facets. These VO2 nanowires should provide promising materials for fundamental investigations of nanoscale metal-insulator transitions.

  14. Hysteresis Phenomena in Sulfur Dioxide Oxidation over Supported Vanadium Catalysts

    DEFF Research Database (Denmark)

    Masters, Stephen G.; Eriksen, Kim Michael; Fehrmann, Rasmus

    1997-01-01

    Catalyst deactivation and hysteresis behavior in industrial SO2-oxidation catalysts have been studied in the temperature region 350-480 C by combined in situ EPR spectroscopy and catalytic activity measurements. The feed gas composition simulated sulfuric acid synthesis gas and wet/dry de...

  15. Ultrafast Hot Electron Induced Phase Transitions in Vanadium Dioxide

    Directory of Open Access Journals (Sweden)

    Haglund R. F.

    2013-03-01

    Full Text Available The Au/Cr/VO2/Si system was investigated in pump–probe experiments. Hot-electrons generated in the Au were found to penetrate into the underlying VO2 and couple with its lattice inducing a semiconductor-to-metal phase transition in ~2 picoseconds.

  16. Effects of Niobium-Loading on Sulfur Dioxide Gas-Sensing Characteristics of Hydrothermally Prepared Tungsten Oxide Thick Film

    Directory of Open Access Journals (Sweden)

    Viruntachar Kruefu

    2015-01-01

    Full Text Available Nb-loaded hexagonal WO3 nanorods with 0–1.0 wt% loading levels were successfully synthesized by a simple hydrothermal and impregnation process and characterized for SO2 sensing. Nb-loaded WO3 sensing films were produced by spin coating on alumina substrate with interdigitated gold electrodes and annealed at 450°C for 3 h in air. Structural characterization by X-ray diffraction, high-resolution transmission electron microscopy, and Brunauer-Emmett-Teller analysis showed that spherical, oval, and rod-like Nb nanoparticles with 5–15 nm mean diameter were uniformly dispersed on hexagonal WO3 nanorods with 50–250 nm diameter and 100 nm–5 µm length. It was found that the optimal Nb loading level of 0.5 wt% provides substantial enhancement of SO2 response but the response became deteriorated at lower and higher loading levels. The 0.50 wt% Nb-loaded WO3 nanorod sensing film exhibits the best SO2 sensing performances with a high sensor response of ~10 and a short response time of ~6 seconds to 500 ppm of SO2 at a relatively low optimal operating temperature of 250°C. Therefore, Nb loading is an effective mean to improve the SO2 gas-sensing performances of hydrothermally prepared WO3 nanorods.

  17. Comparative study of water and carbon dioxide adsorption on CuFeO2 and CuFe1-xGaxO2 highly epitaxial thin films

    Science.gov (United States)

    Rojas, S.; Joshi, T.; Borisov, P.; Lederman, D.; Cabrera, A. L.

    Thermal programmed desorption (TPD) of CO2 and H2O from a 200 nm thick CuFeO2 and 52 nm thick CuFe1-xGaxO2 delafossite surfaces was performed in a Ultra-high vacuum (UHV) chamber. The thin films with epitaxial quality were grown by Pulsed Laser Deposition (PLD) on Al2O3 (0001) substrates . The adsorption / desorption of CO2 and H2O process was also monitored with X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES). Our results revealed that carbon dioxide is preferentially chemisorbed by CuFe1-xGaxO2 over water and we observed the opposite behavior with regard to chemisorption of CO2 and H2O over CuFeO2. Hydroxyls and metal carbonates were formed on the surface due to the chemisorption of H2O and CO2. Arrhenius plots for CO2 and H2O desorption were done and activation energy for desorption were obtained. Supported by FONDECyT 1130372.

  18. Headspace thin-film microextraction coupled with surface-enhanced Raman scattering as a facile method for reproducible and specific detection of sulfur dioxide in wine.

    Science.gov (United States)

    Deng, Zhuo; Chen, Xuexu; Wang, Yiru; Fang, Enhua; Zhang, Zhigang; Chen, Xi

    2015-01-06

    By coupling thin-film microextraction (TFME) with surface-enhanced Raman scattering (SERS), a facile method was developed for the determination of sulfur dioxide (SO2), the most effective food additive in winemaking technology. The TFME substrate was made by free settling of sea urchin-like ZnO nanomaterials on a glass sheet. The headspace sampling (HS) procedure for SO2 was performed in a simple homemade device, and then the SO2 was determined using SERS after uniformly dropping or spraying a SERS-active substrate (gold nanoparticles, AuNPs) onto the surface of the TFME substrate. A reproducible and strong SERS response of the SO2 absorbed onto the ZnO substrate was obtained. After condition optimization, the SERS signal intensity at a shift of 600 cm(-1) and the SO2 concentration showed a good linearity in the range of 1-200 μg/mL, and the linear correlation coefficient was 0.992. The detection limit for SO2 was found to be 0.1 μg/mL. The HS-TFME-SERS method was applied for the determination of SO2 in wine, and the results obtained agreed very well with those obtained using the traditional distillation and titration method. Analysis of variance and Student t test show that there is no significant difference between the two methods, indicating that the newly developed method is fast, convenient, sensitive and has selective characteristics in the determination of SO2 in wine.

  19. Highly transparent VO2-SiO2 films with excellent infrared characteristics by dual-target magnetron sputtering

    Science.gov (United States)

    Cheng, Qing; Su, Da; Wang, Yaqin; Huang, Ying

    2017-08-01

    With the aim to fabricate high quality and boosting the optical performance of vanadium dioxide (VO2) film, basing on effective medium theory, dual-target magnetron sputtering method is first introduced into VO2-SiO2 composite film on quartz by changing the flow ratio of Argon and oxygen. X-Ray diffraction measurement indicates the purity of the composite film. Atomic force microscopy measurement shows that the minimum grain size is about 45nm. Infrared (IR) switching characteristic is well demonstrated by a double-frequented He-Ne laser at the wavelength of 3mμ,compare to VO2 film obtained at the same sputtering time, the result reveals that the composite film exhibit excellent IR switching property, furthermore, multi-wavelength tests and calculations show that all of the obtained composite films exhibit high integrate luminous transmittance of 50%, and the transmittance in semiconducting phase of one thin film is 65% and decreases to 24% in metallic phase at the wavelength of 2mμ , with the switching efficiency of 63%. High visible transmittance and excellent infrared switching characteristics make the film an appropriate candidate for laser protection as well as smart windows.

  20. Integration of vanadium-mixed addenda Dawson heteropolytungstate within poly(3,4-ethylenedioxythiophene) and poly(2,2'-bithiophene) films by electrodeposition from the nonionic micellar aqueous medium

    Energy Technology Data Exchange (ETDEWEB)

    Goral, Monika [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Jouini, Mohamed, E-mail: jouini@univ-paris-diderot.f [Laboratory Interfaces, Traitements, Organisation et DYnamique des Systemes (ITODYS) UMR 7086, Universite Paris Diderot Paris 7 Batiment Lavoisier, 15 Rue Jean Antoine de Baif, 75205 Paris Cedex 13 (France); Perruchot, Christian [Laboratory Interfaces, Traitements, Organisation et DYnamique des Systemes (ITODYS) UMR 7086, Universite Paris Diderot Paris 7 Batiment Lavoisier, 15 Rue Jean Antoine de Baif, 75205 Paris Cedex 13 (France); Miecznikowski, Krzysztof; Rutkowska, Iwona A. [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Kulesza, Pawel J., E-mail: pkulesza@chem.uw.edu.p [Department of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland)

    2011-04-01

    A comparative study describing immobilization of the Dawson type mixed addenda heteropolyanion, [P{sub 2}W{sub 17}VO{sub 62}]{sup 8-} into conducting polymer films of poly(3,4-ethylenedioxythiophene), PEDOT, and poly(2,2'-bithiophene), PBT, is reported. Electrosynthesis of these hybrid films was performed using a micellar aqueous solution of the nonionic surfactant, polyethylene glycol tert-octylphenyl ether (Triton X-100). Deposited composite films were characterised electrochemically and, on the whole, they exhibited fast electron transfer (ET) properties and relatively high stability towards continuous potential cycling in acidic media. In particular, PEDOT composite showed relatively faster ET properties in comparison to PBT composite. Their permeability was investigated in the presence of cationic and anionic redox probes. Our results implied good mediating capabilities of the [P{sub 2}W{sub 17}V{sup 4+}O{sub 62}]{sup 8-} anion (within the [P{sub 2}W{sub 17}V{sup 4+}O{sub 62}]{sup 8-}-PEDOT hybrid film) towards the iron (III) reduction. The specific electrocatalytic (reductive) capabilities of hybrid films were also studied by probing the reduction of bromate. The films were further characterised by X-ray photoelectron spectroscopy to establish their interfacial elemental composition. Moreover, their surface morphology was imaged by atomic force microscopy and scanning electron microscopy. Results have shown that physicochemical properties of the investigated hybrid films were affected by polymer hydrophobicity.

  1. Interaction of vanadium and phosphorus in chicks.

    Science.gov (United States)

    Hill, C H

    1994-12-01

    Studies were carried out to determine the effect of dietary vanadium on chicks fed phosphorus deficient and control diets. Vanadium at 50 mg/kg of diet decreased growth of both control and deficient chicks. The high mortality among the phosphorus deficient chicks was significantly alleviated by the presence of vanadium. The increased relative ventricular weights found among the deficient chicks was also alleviated by the presence of dietary vanadium. Vanadium fed at 10 or 20 mg/kg diet did not reduce growth rate but significantly reduced mortality among chicks fed the deficient diet and decreased the relative ventricle weights. Time course studies revealed that chicks are hatched with high relative ventricular weights (.83% of body wt) and remain at that level among chicks fed the phosphorus deficient diet. The addition of vanadium or phosphate to the diet resulted in a progressive decrease in relative ventricular weights. The inclusion of vanadium in the diet resulted in increased serum phosphorus levels among the deficient chicks that may be related to the decrease in mortality and relative ventricle weights.

  2. Low-energy electron induced processes in molecular thin films condensed on silicon and titanium dioxide surfaces

    Science.gov (United States)

    Lane, Christopher D.

    The focus of the presented experimental research is to examine the fundamental physics and chemistry of electron-stimulated reactions upon adsorbate covered single crystal surfaces. Specifically, condensed SiCl4 on the Si(111) surface and condensed H2O on the TiO2 (110) surface have been studied. By varying adsorbate film thicknesses, the coupling strength of the electron target molecule to the substrate and surrounding media dictates the progression of the electron induced reactions. To investigate the electron interactions with SiCl4 on the Si(111) surface, a multilayer to monolayer approach was taken. Experiments measuring the electron stimulated desorption (ESD) of fragment cations are discussed in Chapter 3. ESD of neutrals was performed on a multilayer (100 ML) coverage of SiCl4 and is discussed in Chapter 4. These experiments remove the influence of the silicon substrate on the electron induced dissociative processes that are monitored via time of flight mass spectrometry (ToF-MS). The results in Chapter 3 and Chapter 4 have been published in Surface Science 593 (2005) 173 and in the Journal of Chemical Physics 124 (2006) 164702, respectively. Results from electron induced reactions within thin films of SiCl4 are presented in Chapter 5. In the low coverage region, the cation and neutral desorption channels are monitored simultaneously, and the adsorbate coupling strength to the silicon substrate is substantially greater. This affects the desorption yields and the autodetachment probability of the transient negative ion (SiCl4-). Chapters 6--8 discuss work that focuses on the electron-stimulated reactions within the H2O/TiO2 system. A discussion of the interactions of H2O with the TiO2(110) surface is presented in Chapter 6. The transition metal oxide surface is comprised of acidic and basic water adsorption sites along with intrinsic surface defects where surface oxygen atoms are missing. These surface defect sites significantly influence the interactions of

  3. Thermal aging effect of vanadyl acetylacetonate precursor for deposition of VO{sub 2} thin films with thermochromic properties

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jung-Hoon [Department of Chemistry, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Nam, Sang-Hun [Institute of Basic Science, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Kim, Donguk; Kim, Minha [School of Electronic and Electrical Engineering, Sungkyunkwan University (Korea, Republic of); Seo, Hyeon Jin; Ro, Yu Hyeon [Department of Chemistry, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Joo, Yong Tae [YOUNG DO Glass Industry Co., Ltd., Jeongeup (Korea, Republic of); Lee, Jaehyeong [School of Electronic and Electrical Engineering, Sungkyunkwan University (Korea, Republic of); Boo, Jin-Hyo, E-mail: jhboo@skku.edu [Department of Chemistry, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of); Institute of Basic Science, Sungkyunkwan University, 440-746 Suwon (Korea, Republic of)

    2016-10-15

    Highlights: • 7 day aged VO(acac){sub 2} sol shows enhanced adhesivity on the SiO{sub 2} compared with non-aged sol. • The aging process has significantly affected the morphologies of VO{sub 2} films. • From the FT-IR spectra, thermal aging process provides the deformation of precursor. • The metal insulator transition (MIT) efficiency (ΔT{sub at2000} {sub nm}) reached a maximum value of 51% at 7 day aging. • Thermal aging process could shorten the aging time of sol solution. - Abstract: Thermochromic properties of vanadium dioxide (VO{sub 2}) have been studied extensively due to their IR reflection applications in energy smart windows. In this paper, we studied the optical switching property of VO{sub 2} thin film, depending on the thermal aging time of the vanadyl acetylacetonate (VO(acac){sub 2}) precursor. We found the alteration of the IR spectra of the precursor by tuning the aging time as well as heat treatments of the precursor. An aging effect of vanadium precursor directly affects the morphologies, optical switching property and crystallinity of VO{sub 2} films. The optimum condition was achieved at the 7 day aging time with metal insulator transition (MIT) efficiency of 50%.

  4. An investigation of the production of thin films of some materials which undergo phase transitions for optical applications

    CERN Document Server

    Pedlar, I D

    1995-01-01

    The aim of this work was to study the possibility of producing a fast switching optical thin film device to react to laser radiation in the visible/near infrared region of the spectrum. The switching mechanism was to be thermally driven. A computer program was written to enable the effects of changes of the refractive index of a component of a multilayer thin film stack to be modelled. Attempts to use the phase transition in vanadium dioxide were unsuccessful because, in the spectral region of interest, the 'open-state' absorption was too great. A class of materials known as 'the bronzes' was identified as being potentially useful. Attempts were made to produce thin films of bronze compounds of vanadium, tungsten and molybdenum by the techniques of conventional thermal evaporation and laser ablation for further studies. The former technique appeared to suffer from problems of decomposition of the source material. The latter technique showed greater promise although loss of oxygen was a constant problem. Selec...

  5. Vanadium Bioleaching Behavior by Acidithiobacillus ferrooxidans from a Vanadium-Bearing Shale

    Directory of Open Access Journals (Sweden)

    Dunpei Wei

    2018-01-01

    Full Text Available This study investigated bioleaching behavior of vanadium from a vanadium-bearing shale using Acidithiobacillus ferrooxidans (A. ferrooxidans. Results showed a maximum recovery of 62% vanadium in 1.2-day bioleaching, which was 22.45% higher than the controls. Then, the vanadium leaching efficiency decreased significantly, only 24% of that was obtained on the tenth day. The vanadium extraction in 1.2 days was mainly attributed to the dissolution of vanadium in free oxides of shale. Fe3+ produced by A. ferrooxidans promoted the dissolution process. X-ray diffraction (XRD patterns of the leached residues confirmed the generation of jarosite. SEM-EDS analysis of the residues indicated that jarosite adsorbed on the shale and inhibited the further dissolution of vanadium. The relevance of V, Fe, S, O was quite good in the energy disperse X-ray spectrometry (EDS element mapping of jarosite, and acid-washing of the jarosite resulted in 31.6% of the vanadium in the precipitates desorption, indicating that the decrease of vanadium leaching efficiency in bioleaching process was caused by both adsorption and co-precipitation with jarosite.

  6. Mesoporous Vanadium Nitride Synthesized by Chemical Routes

    National Research Council Canada - National Science Library

    Mishra, Pragnya P; Theerthagiri, J; Panda, Rabi N

    2014-01-01

    Nanocrystalline vanadium nitride (VN) materials are synthesized by two different routes, namely, the urea route and the ammonia route, using various V2O5 precursors obtained by citric acid–based sol–gel method...

  7. Vertical Administration of Vanadium through Lactation Induces ...

    African Journals Online (AJOL)

    The work investigated the protective role of vitamin E on vanadium induced neurotoxicity. Three adult female rats were divided into three groups, A-C with each dam and her pups forming a group. Group A served as control. The dam in Group B was given 3mg/kg b.w./day of vanadium from PND 1 while the Group C dam ...

  8. Comparison of hypoglycemic activity and toxicity of vanadium (IV) and vanadium (V) absorbed in fermented mushroom of Coprinus comatus.

    Science.gov (United States)

    Ma, Zhaoji; Fu, Qin

    2009-12-01

    This study was designed to evaluate the effect and toxicity of administration of vanadium (IV, V) absorbed by Coprinus comatus (VACC) on alloxan-induced and sucrosefed hyperglycemic mice, respectively. The blood glucose, lipid profile, and the organ masses of the mice were analyzed. After the mice were administered with VACC, the blood glucose and the lipid profile of hyperglycemic mice decreased, irrespective of the VACC produced by vanadium (IV) or vanadium (V). However, the organ masses of the mice were significantly different after the mice were treated with vanadium (IV) and vanadium (V) 9 weeks later. The results indicate both vanadium (IV) and vanadium (V) absorbed in C. comatus have hypoglycemic activity on hyperglycemic mice. However, vanadium (IV) absorbed in C. comatus is less toxic to mice than vanadium (V).

  9. Vanadium speciation by chromatographic separation of V(IV) and V ...

    African Journals Online (AJOL)

    A new method for vanadium speciation has been developed. The method is based on chromatographic separation of vanadium(IV) and vanadium(V) in acidic medium followed by the determination with ICP-OES. Vanadium species exist in acidic solution (pH < 3) as VO2+ for vanadium(IV) and VO2 + for vanadium(V).

  10. 77 FR 46712 - Ferrovanadium and Nitrided Vanadium From the Russian Federation: Negative Final Determination of...

    Science.gov (United States)

    2012-08-06

    ... are vanadium additives other than ferrovanadium and nitrided vanadium, such as vanadium-aluminum master alloys, vanadium chemicals, vanadium waste and scrap, vanadium-bearing raw materials, such as slag... the processing performed in the United States represents a small proportion of the value of the...

  11. Vanadium in landscape components of western Transbaikalia

    Science.gov (United States)

    Kashin, V. K.

    2017-10-01

    Vanadium in soil-forming rocks, soils, and vegetation of forest-steppe, steppe, and dry-steppe landscapes of Transbaikalia has been studied. The mean element contents in rocks and soils are equal to its mean natural abundances (clarke values). The content of vanadium in soils is strictly determined by its content in parent materials; its dependence on the vanadium concentration in plants and on the soil pH and humus is less pronounced. With respect to the coefficient of biological uptake by plants, vanadium is assigned to the group of elements of slight accumulation (0.10-0.33) on mineral soils and of moderate accumulation (1.1-1.5) on peat bog soils. The mean vanadium concentration in steppe, meadow, and cultivated vegetation exceeds the norm for animals by 1.7-2.6 times but does not rich toxic levels. Vanadium uptake by plants is most intensive in meadow cenoses and is less intensive in dry-steppe cenoses.

  12. Optical and structural characterization of titanium dioxide films growth by the r f-sputtering technique; Caracterizacion optica y estructural de peliculas de dioxido de titanio crecidas por la tecnica de rf-sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Florido C, A.; Calderon, A. [CICATA-IPN, Av. Legaria 694, 11500 Mexico D.F. (Mexico); Mendoza A, J.G.; Becerril, M.; Zelaya A, O. [CINVESTAV, A.P. 14-740, 07000 Mexico D.F. (Mexico)

    2007-07-01

    Full text: The elaboration of a series of grown films of TiO on Corning glaze substrates, as well as silicon, by means of the rf-sputtering technique using one power of 160 watts, with the objective of obtaining the anatase phase which one presents better activity for applications in photo catalysis. In the process of growth it was used a temperature in the range from 300 to 600 C and a separation distance among the target and the substrate of 3.5 cm. The used atmosphere was a mixture of argon and oxygen. It was carried out the characterization of the films obtained by means of UV-vis spectrophotometry, and photoluminescence (FL). The microstructure analysis was carried out by means of X-ray diffraction (XRD), micro-Raman (MR), and atomic force microscopy (AFM). By means of the diffractographs it was determined the grain size. Our results show that in our films they are present the anatase and rutile phases of the titanium dioxide. The analysis of the results of optical spectra shows a forbidden band of the titanium dioxide around 3.2 eV. (Author)

  13. Bioaccumulation of Vanadium by Vanadium-Resistant Bacteria Isolated from the Intestine of Ascidia sydneiensis samea.

    Science.gov (United States)

    Romaidi; Ueki, Tatsuya

    2016-06-01

    Isolation of naturally occurring bacterial strains from metal-rich environments has gained popularity due to the growing need for bioremediation technologies. In this study, we found that the vanadium concentration in the intestine of the vanadium-rich ascidian Ascidia sydneiensis samea could reach 0.67 mM, and thus, we isolated vanadium-resistant bacteria from the intestinal contents and determined the ability of each bacterial strain to accumulate vanadium and other heavy metals. Nine strains of vanadium-resistant bacteria were successfully isolated, of which two strains, V-RA-4 and S-RA-6, accumulated vanadium at a higher rate than did the other strains. The maximum vanadium absorption by these bacteria was achieved at pH 3, and intracellular accumulation was the predominant mechanism. Each strain strongly accumulated copper and cobalt ions, but accumulation of nickel and molybdate ions was relatively low. These bacterial strains can be applied to protocols for bioremediation of vanadium and heavy metal toxicity.

  14. Enhanced Lithium-ion intercalation properties of coherent hydrous vanadium pentoxide-carbon cryogels nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Anqiang; Liu, Dawei; Zhou, Xiaoyuan; Garcia, Betzaita Betalla; Liang, Shu-quan; Liu, Jun; Cao, Guozhong

    2010-06-01

    Coherent hydrous vanadium pentoxide (V2O5•nH2O) - carbon cryogels (CCs) nanocomposites were synthesized by electrodeposition of vanadium pentoxide onto the porous carbon scaffold which was derived from resorcinol (R) and formaldehyde (F) organic hydrogels. As-fabricated nanocomposites were characterized by scanning electron microscopy (SEM), along with EDAX and nitrogen sorption isotherms which suggested vanadium pentoxide incorporated in the pores of carbon cryogels. The nanocomposites showed much improved discharge capacity and better cyclic stability as compared to hydrous vanadium pentoxide films deposited on platinum foil. The discharge capacity of the nanocomposites reached 280 mAh/g based on the mass of the vandium pentoxide at a current density of 100mA/g and it possessed good cycle stability at different discharge rate. The results demonstrated that electrochemical performances, such as specific discharge capacitance and reversibility of the composite electrode, could be greatly enhanced by the introduction of carbon cryogels (CCs) scaffold with three-dimensionally interconnected porous structure in which V2O5•nH2O homogeneously dispersed.

  15. Enhanced lithium-ion intercalation properties of coherent hydrous vanadium pentoxide-carbon cryogel nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Anqiang [Department of Materials Science and Engineering, University of Washington in Seattle, 302 Roberts Hall, Box 352120, Seattle, WA 352120 (United States); Department of Materials Science and Engineering, Central South University, Hunan 410083 (China); Liu, Dawei; Zhou, Xiaoyuan; Garcia, Betzaita Betalla.; Cao, Guozhong [Department of Materials Science and Engineering, University of Washington in Seattle, 302 Roberts Hall, Box 352120, Seattle, WA 352120 (United States); Liang, Shuquan [Department of Materials Science and Engineering, Central South University, Hunan 410083 (China); Liu, Jun [Pacific Northwest National Laboratory Richland, Washington 99352 (United States)

    2010-06-15

    Coherent hydrous vanadium pentoxide (V{sub 2}O{sub 5}.nH{sub 2}O)-carbon cryogel (CC) nanocomposites were synthesized by electrodeposition of vanadium pentoxide onto the porous carbon scaffold which was derived from resorcinol (R) and formaldehyde (F) organic hydrogels. As-fabricated nanocomposites were characterized by scanning electron microscopy (SEM), along with EDAX and nitrogen sorption isotherms which suggested vanadium pentoxide incorporated in the pores of carbon cryogels. The nanocomposites showed much improved discharge capacity and better cyclic stability as compared to hydrous vanadium pentoxide films deposited on platinum foil. The discharge capacity of the nanocomposites reached 280 mAh g{sup -1} based on the mass of the vandium pentoxide at a current density of 100 mA g{sup -1} and it possessed good cycle stability at different discharge rates. The results demonstrated that electrochemical performances, such as specific discharge capacitance and reversibility of the composite electrode, could be greatly enhanced by the introduction of carbon cryogels (CCs) scaffold with three-dimensionally interconnected porous structure in which V{sub 2}O{sub 5}.nH{sub 2}O homogeneously dispersed. (author)

  16. Iron diminishes the in vitro biological effect of vanadium.

    Science.gov (United States)

    Mechanistic pathways underlying inflammatory injury following exposures to vanadium-containing compounds are not defined. We tested the postulate that the in vitro biological effect of vanadium results from its impact on iron homeostasis. Human bronchial epithelial (HBE) cells ex...

  17. Film

    OpenAIRE

    Balint, Ruth; Dolgopolov, Greg

    2008-01-01

    From the beginning of the twentieth century, Sydney defined cosmopolitanism and modernity in the national imagination, and central to this image was the cinema: its technology, its architecture, its stars, its marketing and the stories it circulated to its audiences about Australia and the world. Though it is difficult to define a genre of Sydney film, Sydney provided the backdrop for a host of ideas about the city, and later suburbia. Sydney came to be seen as a ‘tinsel town’ of cultural ban...

  18. 77 FR 51825 - Ferrovanadium and Nitrided Vanadium From Russia

    Science.gov (United States)

    2012-08-27

    ... COMMISSION Ferrovanadium and Nitrided Vanadium From Russia Determination On the basis of the record \\1... antidumping duty order on ferrovanadium and nitrided vanadium from Russia would not be likely to lead to... contained in USITC Publication 4345 (August 2012), entitled Ferrovanadium and Nitrided Vanadium from Russia...

  19. Memory Deficit Recovery after Chronic Vanadium Exposure in Mice

    Directory of Open Access Journals (Sweden)

    Oluwabusayo Folarin

    2016-01-01

    Full Text Available Vanadium is a transitional metal with an ability to generate reactive oxygen species in the biological system. This work was designed to assess memory deficits in mice chronically exposed to vanadium. A total of 132 male BALB/c mice (4 weeks old were used for the experiment and were divided into three major groups of vanadium treated, matched controls, and animals exposed to vanadium for three months and thereafter vanadium was withdrawn. Animals were tested using Morris water maze and forelimb grip test at 3, 6, 9, and 12 months of age. The results showed that animals across the groups showed no difference in learning but had significant loss in memory abilities after 3 months of vanadium exposure and this trend continued in all vanadium-exposed groups relative to the controls. Animals exposed to vanadium for three months recovered significantly only 9 months after vanadium withdrawal. There was no significant difference in latency to fall in the forelimb grip test between vanadium-exposed groups and the controls in all age groups. In conclusion, we have shown that chronic administration of vanadium in mice leads to memory deficit which is reversible but only after a long period of vanadium withdrawal.

  20. Determination of Leachable Vanadium (V) in Sediment | Mampuru ...

    African Journals Online (AJOL)

    A method for speciation of vanadium in solid samples was developed for quantification of vanadium(+5) in solid samples of sediment Certified Reference Materials (CRM) PACS-2 and MESS-3 (Trace Elements in Sediments) of known total vanadium content. The method relies on a classical analytical chemistry procedure ...

  1. Memory Deficit Recovery after Chronic Vanadium Exposure in Mice.

    Science.gov (United States)

    Folarin, Oluwabusayo; Olopade, Funmilayo; Onwuka, Silas; Olopade, James

    2016-01-01

    Vanadium is a transitional metal with an ability to generate reactive oxygen species in the biological system. This work was designed to assess memory deficits in mice chronically exposed to vanadium. A total of 132 male BALB/c mice (4 weeks old) were used for the experiment and were divided into three major groups of vanadium treated, matched controls, and animals exposed to vanadium for three months and thereafter vanadium was withdrawn. Animals were tested using Morris water maze and forelimb grip test at 3, 6, 9, and 12 months of age. The results showed that animals across the groups showed no difference in learning but had significant loss in memory abilities after 3 months of vanadium exposure and this trend continued in all vanadium-exposed groups relative to the controls. Animals exposed to vanadium for three months recovered significantly only 9 months after vanadium withdrawal. There was no significant difference in latency to fall in the forelimb grip test between vanadium-exposed groups and the controls in all age groups. In conclusion, we have shown that chronic administration of vanadium in mice leads to memory deficit which is reversible but only after a long period of vanadium withdrawal.

  2. VO2 thin films synthesis for collaborators and various applications.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Raegan Lynn [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Clem, Paul G. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2016-11-01

    Vanadium dioxide (VO2) is an attractive material for a variety of applications due to its metal-to-insulator transition (MIT) observed at modest temperatures. This transition takes VO2 from its low temperature insulating monoclinic phase to a high temperature (above 68°C) metallic rutile phase. This transition gives rise to a change in resistivity up to 5 orders of magnitude and a change in complex refractive index (especially at IR wavelengths), which is of interest for radar circuit protection and tunable control of infrared signature. Recently, collaborations have been initiated between CINT scientists and external university programs. The Enhanced Surveillance funds help fund this work which enabled synthesis of VO2 films for several collaborations with internal and external researchers.

  3. Thin Films for Advanced Glazing Applications

    Directory of Open Access Journals (Sweden)

    Ann-Louise Anderson

    2016-09-01

    Full Text Available Functional thin films provide many opportunities for advanced glazing systems. This can be achieved by adding additional functionalities such as self-cleaning or power generation, or alternately by providing energy demand reduction through the management or modulation of solar heat gain or blackbody radiation using spectrally selective films or chromogenic materials. Self-cleaning materials have been generating increasing interest for the past two decades. They may be based on hydrophobic or hydrophilic systems and are often inspired by nature, for example hydrophobic systems based on mimicking the lotus leaf. These materials help to maintain the aesthetic properties of the building, help to maintain a comfortable working environment and in the case of photocatalytic materials, may provide external pollutant remediation. Power generation through window coatings is a relatively new idea and is based around the use of semi-transparent solar cells as windows. In this fashion, energy can be generated whilst also absorbing some solar heat. There is also the possibility, in the case of dye sensitized solar cells, to tune the coloration of the window that provides unheralded external aesthetic possibilities. Materials and coatings for energy demand reduction is highly desirable in an increasingly energy intensive world. We discuss new developments with low emissivity coatings as the need to replace scarce indium becomes more apparent. We go on to discuss thermochromic systems based on vanadium dioxide films. Such systems are dynamic in nature and present a more sophisticated and potentially more beneficial approach to reducing energy demand than static systems such as low emissivity and solar control coatings. The ability to be able to tune some of the material parameters in order to optimize the film performance for a given climate provides exciting opportunities for future technologies. In this article, we review recent progress and challenges in

  4. Preparation, Characterization and Thermo-Chromic Properties of EVA/VO2 Laminate Films for Smart Window Applications and Energy Efficiency in Building

    Directory of Open Access Journals (Sweden)

    Onruthai Srirodpai

    2017-01-01

    Full Text Available Thermochromic films based on vanadium dioxide (VO2/ethylene vinyl acetate copolymer (EVA composite were developed. The monoclinic VO2 particles was firstly prepared via hydrothermal and calcination processes. The effects of hydrothermal time and tungsten doping agent on crystal structure and morphology of the calcined metal oxides were reported. After that, 1 wt % of the prepared VO2 powder was mixed with EVA compound, using two different mixing processes. It was found that mechanical properties of the EVA/VO2 films prepared by the melt process were superior to those of which prepared by the solution process. On the other hand, percentage visible light transmittance of the solution casted EVA/VO2 film was greater than that of the melt processed composite film. This was related to the different gel content of EVA rubber and state of dispersion and distribution of VO2 within the polymer matrix phase. Thermochromic behaviors and heat reflectance of the EVA/VO2 film were also verified. In overall, this study demonstrated that it was possible to develop a thermochromic film using the polymer composite approach. In this regard, the mixing condition was found to be one of the most important factors affecting morphology and thermo-mechanical properties of the films.

  5. Preparation, Characterization and Thermo-Chromic Properties of EVA/VO₂ Laminate Films for Smart Window Applications and Energy Efficiency in Building.

    Science.gov (United States)

    Srirodpai, Onruthai; Wootthikanokkhan, Jatuphorn; Nawalertpanya, Saiwan; Yuwawech, Kitti; Meeyoo, Vissanu

    2017-01-11

    Thermochromic films based on vanadium dioxide (VO₂)/ethylene vinyl acetate copolymer (EVA) composite were developed. The monoclinic VO₂ particles was firstly prepared via hydrothermal and calcination processes. The effects of hydrothermal time and tungsten doping agent on crystal structure and morphology of the calcined metal oxides were reported. After that, 1 wt % of the prepared VO₂ powder was mixed with EVA compound, using two different mixing processes. It was found that mechanical properties of the EVA/VO₂ films prepared by the melt process were superior to those of which prepared by the solution process. On the other hand, percentage visible light transmittance of the solution casted EVA/VO₂ film was greater than that of the melt processed composite film. This was related to the different gel content of EVA rubber and state of dispersion and distribution of VO₂ within the polymer matrix phase. Thermochromic behaviors and heat reflectance of the EVA/VO₂ film were also verified. In overall, this study demonstrated that it was possible to develop a thermochromic film using the polymer composite approach. In this regard, the mixing condition was found to be one of the most important factors affecting morphology and thermo-mechanical properties of the films.

  6. Study of thermal degradation of vanadium and titanium acetylacetonate derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Dyagileva, L.M.; Tsyganova, E.I.; Mar' in, V.P.; Aleksandrov, Yu.A. (Gor' kovskij Gosudarstvennyj Univ. (USSR). Nauchno-Issledovatel' skij Inst. Khimii)

    1982-09-01

    Kinetics and products of vanadium (+3), vanadyl (+3) and titanium (+3) acetylacetonates thermal degradation have been studied in vapor phase in the closed system at 300-470 deg C. Gaseous composition of pyrolysis has been determined at different levels of decomposition. It is supposed that vanadium and metal vanadium mixed oxides become vanadium (+3) pyrolysis products. It is shown that metal oxidation level does not affect the thermal degradation rate. Central atom substitution leads to the change in thermal stability. Titanium (+3) acetylacetate derivatives are less stable than vanadium (+3) ones.

  7. Global biogeochemical cycle of vanadium.

    Science.gov (United States)

    Schlesinger, William H; Klein, Emily M; Vengosh, Avner

    2017-12-26

    Synthesizing published data, we provide a quantitative summary of the global biogeochemical cycle of vanadium (V), including both human-derived and natural fluxes. Through mining of V ores (130 × 109 g V/y) and extraction and combustion of fossil fuels (600 × 109 g V/y), humans are the predominant force in the geochemical cycle of V at Earth's surface. Human emissions of V to the atmosphere are now likely to exceed background emissions by as much as a factor of 1.7, and, presumably, we have altered the deposition of V from the atmosphere by a similar amount. Excessive V in air and water has potential, but poorly documented, consequences for human health. Much of the atmospheric flux probably derives from emissions from the combustion of fossil fuels, but the magnitude of this flux depends on the type of fuel, with relatively low emissions from coal and higher contributions from heavy crude oils, tar sands bitumen, and petroleum coke. Increasing interest in petroleum derived from unconventional deposits is likely to lead to greater emissions of V to the atmosphere in the near future. Our analysis further suggests that the flux of V in rivers has been incremented by about 15% from human activities. Overall, the budget of dissolved V in the oceans is remarkably well balanced-with about 40 × 109 g V/y to 50 × 109 g V/y inputs and outputs, and a mean residence time for dissolved V in seawater of about 130,000 y with respect to inputs from rivers.

  8. Vanadium recycling in the United States in 2004

    Science.gov (United States)

    Goonan, Thomas G.

    2011-01-01

    As one of a series of reports that describe the recycling of metal commodities in the United States, this report discusses the flow of vanadium in the U.S. economy in 2004. This report includes a description of vanadium supply and demand in the United States and illustrates the extent of vanadium recycling and recycling trends. In 2004, apparent vanadium consumption, by end use, in the United States was 3,820 metric tons (t) in steelmaking and 232 t in manufacturing, of which 17 t was for the production of superalloys and 215 t was for the production of other alloys, cast iron, catalysts, and chemicals. Vanadium use in steel is almost entirely dissipative because recovery of vanadium from steel scrap is chemically impeded under the oxidizing conditions in steelmaking furnaces. The greatest amount of vanadium recycling is in the superalloy, other-alloy, and catalyst sectors of the vanadium market. Vanadium-bearing catalysts are associated with hydrocarbon recovery and refining in the oil industry. In 2004, 2,850 t of vanadium contained in alloy scrap and spent catalysts was recycled, which amounted to about 44 percent of U.S. domestic production. About 94 percent of vanadium use in the United States was dissipative (3,820 t in steel/4,050 t in steel+fabricated products).

  9. Vanadium bioavailability in soils amended with blast furnace slag

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Maja A., E-mail: maja.larsson@slu.se [Department of Soil and Environment, Swedish University of Agricultural Sciences, P.O. Box 7014, 750 07 Uppsala (Sweden); Baken, Stijn, E-mail: stijn.baken@ees.kuleuven.be [Department of Earth and Environmental Sciences, Leuven University, Kasteelpark Arenberg 20 bus 2459, 3001 Leuven (Belgium); Smolders, Erik, E-mail: erik.smolders@ees.kuleuven.be [Department of Earth and Environmental Sciences, Leuven University, Kasteelpark Arenberg 20 bus 2459, 3001 Leuven (Belgium); Cubadda, Francesco, E-mail: francesco.cubadda@iss.it [Department of Food Safety and Veterinary Public Health, Istituto Superiore di Sanità, Viale Regina Elena 299, Rome 00161 (Italy); Gustafsson, Jon Petter, E-mail: jon-petter.gustafsson@slu.se [Department of Soil and Environment, Swedish University of Agricultural Sciences, P.O. Box 7014, 750 07 Uppsala (Sweden); Division of Land and Water Resources Engineering, KTH Royal Institute of Technology, Brinellvägen 28, 100 44 Stockholm (Sweden)

    2015-10-15

    Blast furnace (BF) slags are commonly applied as soil amendments and in road fill material. In Sweden they are also naturally high in vanadium. The aim of this study was to assess the vanadium bioavailability in BF slags when applied to soil. Two soils were amended with up to 29% BF slag (containing 800 mg V kg{sup −1}) and equilibrated outdoors for 10 months before conducting a barley shoot growth assay. Additional soil samples were spiked with dissolved vanadate(V) for which assays were conducted two weeks (freshly spiked) and 10 months (aged) after spiking. The BF slag vanadium was dominated by vanadium(III) as shown by V K-edge XANES spectroscopy. In contrast, results obtained by HPLC-ICP-MS showed that vanadium(V), the most toxic vanadium species, was predominant in the soil solution. Barley shoot growth was not affected by the BF slag additions. This was likely due to limited dissolution of vanadium from the BF slag, preventing an increase of dissolved vanadium above toxic thresholds. The difference in vanadium bioavailability among treatments was explained by the vanadium concentration in the soil solution. It was concluded that the vanadium in BF slag is sparingly available. These findings should be of importance in environmental risk assessment.

  10. Effects of electron beam irradiation on tin dioxide gas sensors

    Indian Academy of Sciences (India)

    WINTEC

    Abstract. In this paper, the effects of electron beam irradiation on the gas sensing performance of tin dioxide thin films toward H2 are studied. The tin dioxide thin films were prepared by ultrasonic spray pyrolysis. The results show that the sensitivity increased after electron beam irradiation. The electron beam irradiation.

  11. Extraction of vanadium from vanadium slag by high pressure oxidative acid leaching

    Science.gov (United States)

    Zhang, Guo-quan; Zhang, Ting-an; Lü, Guo-zhi; Zhang, Ying; Liu, Yan; Liu, Zhuo-lin

    2015-01-01

    To extract vanadium in an environment friendly manner, this study focuses on the process of leaching vanadium from vanadium slag by high pressure oxidative acid leaching. Characterizations of the raw slag, mineralogy transformation, and the form of leach residues were made by X-ray diffraction, scanning electron microscopy, and energy dispersive X-ray spectroscopy. The result shows that the vanadium slag is composed of major phases of fayalite, titanomagnetite, and spinel. During the high pressure oxidative acid leaching process, the fayalite and spinel phases are gradually decomposed by sulfuric acid, causing the release of vanadium and iron in the solution. Meanwhile, unreacted silicon and titanium are enriched in the leach residues. With the initial concentration of sulfuric acid at 250 g·L-1, a leaching temperature of 140°C, a leaching time of 50 min, a liquid-solid ratio of 10:1 mL·g-1, and oxygen pressure at 0.2 MPa, the leaching rate of vanadium reaches 97.69%.

  12. Recovery of Vanadium from a High Ca/V Ratio Vanadium Slag Using Sodium Roasting and Ammonia Leaching

    Science.gov (United States)

    Xu, Song; Long, Mujun; Chen, Dengfu; Fan, Helin; Chen, Yuting; Sun, Xue

    In order to seek an effective extraction process for vanadium, the recovery of vanadium from a high Ca/V ratio vanadium slag was studied by sodium roasting and ammonia leaching. In the present paper, the oxidation and leaching process of vanadium slag was investigated by X-ray diffraction (XRD), scanning electron microscopy and energy dispersive X-ray spectrometry (SEM/EDS) techniques. The effects of ammonium carbonate concentration, leaching temperature and leaching time on the leaching ratio of vanadium were discussed. As indicated in the experimental result, the optimal (NH4)2CO3 concentration was 120g/L, leaching temperature was 60°C and leaching time was 20 min. Approximately 92% of the vanadium was recovered under the optimal conditions. Furthermore, by means of X-ray diffraction analysis, the phase transformations of the vanadium slag during roasting and leaching processes were analyzed and discussed.

  13. Vanadium in marine mussels and algae.

    Science.gov (United States)

    Sperling, K R; Bahr, B; Ott, J

    2000-01-01

    A method is presented which is sensitive enough for the determination of vanadium (V) in marine organisms such as mussels and algae. It was sufficiently checked by a reference material and it was applied to V determination in blue mussels and brown algae from the German Bight.

  14. Structure and function of vanadium haloperoxidases

    NARCIS (Netherlands)

    Wever, R.; Michibata, H.

    2012-01-01

    Vanadium haloperoxidases contain the bare metal oxide vanadate as a prosthetic group and differ strongly from the heme peroxidases in substrate specificity and molecular properties. The substrates of these enzymes are limited to halides and sulfides, which in the presence of hydrogen peroxide are

  15. Geochemistry of vanadium (V) in Chinese coals.

    Science.gov (United States)

    Liu, Yuan; Liu, Guijian; Qu, Qinyuan; Qi, Cuicui; Sun, Ruoyu; Liu, Houqi

    2017-10-01

    Vanadium in coals may have potential environmental and economic impacts. However, comprehensive knowledge of the geochemistry of V in coals is lacking. In this study, abundances, distribution and modes of occurrence of V are reviewed by compiling >2900 reported Chinese coal samples. With coal reserves in individual provinces as the weighting factors, V in Chinese coals is estimated to have an average abundance of 35.81 μg/g. Large variation of V concentration is observed in Chinese coals of different regions, coal-forming periods, and maturation ranks. According to the concentration coefficient of V in coals from individual provinces, three regions are divided across Chinese coal deposits. Vanadium in Chinese coals is probably influenced by sediment source and sedimentary environment, supplemented by late-stage hydrothermal fluids. Specifically, hydrothermal fluids have relatively more significant effect on the enrichment of V in local coal seams. Vanadium in coals is commonly associated with aluminosilicate minerals and organic matter, and the modes of V occurrence in coal depend on coal-forming environment and coal rank. The Chinese V emission inventory during coal combustion is estimated to be 4906 mt in 2014, accounting for 50.55 % of global emission. Vanadium emissions by electric power plants are the largest contributor.

  16. Temperature dependence of thermal conductivity of vanadium ...

    Indian Academy of Sciences (India)

    Unknown

    . Cryogenic Engineering .... Thermal conductivity of vanadium substituted BPSCCO system. 441 trical resistivity as well as the small decrease ..... G, Marre D, Putti M and Siri A S 1997 Physica C273 314. Chawlek J M, Uher C, Whitaker J F and ...

  17. Catalytic determination of vanadium in water

    Science.gov (United States)

    Fishman, M. J.; Skougstad, M.W.

    1964-01-01

    A rapid, accurate, and sensitive spectrophotometric method for the quantitative determination of trace amounts of vanadium in water is based on the catalytic effect of vanadium on the rate of oxidation of gallic acid by persulfate in acid solution. Under given conditions of concentrations of reactants, temperature, and reaction time, the extent of oxidation of gallic acid is proportional to the concentration of vanadium present. Vanadium is determined by measuring the absorbance of the sample at 415 m?? and comparison with standard solutions treated in an identical manner. Concentrations in the range of from 0.1 to 8.0 ??g. per liter may be determined with a standard deviation of 0.2 or less. By reducing the reaction time, the method may be extended to cover the range from 1 to 100 ??g. with a standard deviation of 0.8 or less. Several substances interfere, including chloride above 100 p.p.m., and bromide and iodide in much lower concentrations. Interference from the halides is eliminated or minimized by the addition of mercuric nitrate solution. Most other substances do not interfere at the concentration levels at which they commonly occur in natural waters.

  18. Role of vanadium in Bi-2223 ceramics

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 54; Issue 2. Role of vanadium in Bi-2223 ceramics. D R Mishra ... higher magnetization scattering at the Cu site. The results were explained keeping in mind the liquid phase mechanism behind the formation of the 2223 phase and the possibility of magnetic scattering.

  19. Enhanced Visible Transmittance of Thermochromic VO2 Thin Films by SiO2 Passivation Layer and Their Optical Characterization

    Directory of Open Access Journals (Sweden)

    Jung-Hoon Yu

    2016-07-01

    Full Text Available This paper presents the preparation of high-quality vanadium dioxide (VO2 thermochromic thin films with enhanced visible transmittance (Tvis via radio frequency (RF sputtering and plasma enhanced chemical vapor deposition (PECVD. VO2 thin films with high Tvis and excellent optical switching efficiency (Eos were successfully prepared by employing SiO2 as a passivation layer. After SiO2 deposition, the roughness of the films was decreased 2-fold and a denser structure was formed. These morphological changes corresponded to the results of optical characterization including the haze, reflectance and absorption spectra. In spite of SiO2 coating, the phase transition temperature (Tc of the prepared films was not affected. Compared with pristine VO2, the total layer thickness after SiO2 coating was 160 nm, which is an increase of 80 nm. Despite the thickness change, the VO2 thin films showed a higher Tvis value (λ 650 nm, 58% compared with the pristine samples (λ 650 nm, 43%. This enhancement of Tvis while maintaining high Eos is meaningful for VO2-based smart window applications.

  20. Roles of strain and domain boundaries on the phase transition stability of VO2 thin films

    Science.gov (United States)

    Jian, Jie; Chen, Aiping; Chen, Youxing; Zhang, Xinghang; Wang, Haiyan

    2017-10-01

    The fundamental phase transition mechanism and the stability of the semiconductor-to-metal phase transition properties during multiple thermal cycles have been investigated on epitaxial vanadium dioxide (VO2) thin films via both ex situ heating and in situ heating by transmission electron microscopy (TEM). VO2 thin films were deposited on c-cut sapphire substrates by pulsed laser deposition. Ex situ studies show the broadening of transition sharpness (ΔT) and the width of thermal hysteresis (ΔH) after 60 cycles. In situ TEM heating studies reveal that during thermal cycles, large strain was accumulated around the domain boundaries, which was correlated with the phase transition induced lattice constant change and the thermal expansion. It suggests that the degradation of domain boundary structures in the VO2 films not only caused the transition property reduction (e.g., the decrease in ΔT and ΔH) but also played an important role in preventing the film from fracture during thermal cycles.

  1. Active terahertz metamaterials based on the phase transition of VO{sub 2} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H., E-mail: heungsoo.kim@nrl.navy.mil [Materials Science and Technology Division, Naval Research Laboratory, Washington, DC 20375 (United States); Charipar, N. [Materials Science and Technology Division, Naval Research Laboratory, Washington, DC 20375 (United States); Breckenfeld, E. [National Research Council Fellow at the Naval Research Laboratory, Washington, DC 20375 (United States); Rosenberg, A. [NOVA Research, Inc., Alexandria, VA 22308 (United States); Piqué, A. [Materials Science and Technology Division, Naval Research Laboratory, Washington, DC 20375 (United States)

    2015-12-01

    Vanadium dioxide (VO{sub 2}) thin films were prepared on single crystal sapphire substrates by pulsed laser deposition. VO{sub 2} films exhibited a significant resistivity drop (> 10{sup 4} Ω-cm) and large optical transmittance change (> 60%) in the near-infrared region across their semiconductor-to-metal transition. Hybrid metamaterial devices designed for the THz frequency regime were fabricated by combining double split-ring resonators (SRRs) with phase changing VO{sub 2} films. By changing the conductivity of VO{sub 2} via temperature, the behavior of the SRR gap was adjusted from capacitive to resistive in order to modulate the THz beam transmission at their resonance frequencies. A modulation efficiency greater than 50% was achieved at the magnetic resonance frequencies (0.3 THz and 0.7 THz) in these hybrid SRR–VO{sub 2} metamaterial devices. - Highlights: • Pulsed laser deposition of phase changing VO{sub 2} thin films • Hybrid metamaterial devices composed of split-ring resonators and phase changing VO{sub 2} • Tunable THz transmission with a modulation efficiency over 50%.

  2. Infrared-transmittance tunable metal-insulator conversion device with thin-film-transistor-type structure on a glass substrate

    Directory of Open Access Journals (Sweden)

    Takayoshi Katase

    2017-05-01

    Full Text Available Infrared (IR transmittance tunable metal-insulator conversion was demonstrated on a glass substrate by using thermochromic vanadium dioxide (VO2 as the active layer in a three-terminal thin-film-transistor-type device with water-infiltrated glass as the gate insulator. Alternative positive/negative gate-voltage applications induce the reversible protonation/deprotonation of a VO2 channel, and two-orders of magnitude modulation of sheet-resistance and 49% modulation of IR-transmittance were simultaneously demonstrated at room temperature by the metal-insulator phase conversion of VO2 in a non-volatile manner. The present device is operable by the room-temperature protonation in an all-solid-state structure, and thus it will provide a new gateway to future energy-saving technology as an advanced smart window.

  3. VO2 Thermochromic Films on Quartz Glass Substrate Grown by RF-Plasma-Assisted Oxide Molecular Beam Epitaxy

    Directory of Open Access Journals (Sweden)

    Dong Zhang

    2017-03-01

    Full Text Available Vanadium dioxide (VO2 thermochromic thin films with various thicknesses were grown on quartz glass substrates by radio frequency (RF-plasma assisted oxide molecular beam epitaxy (O-MBE. The crystal structure, morphology and chemical stoichiometry were investigated systemically by X-ray diffraction (XRD, atomic force microscopy (AFM, Raman spectroscopy and X-ray photoelectron spectroscopy (XPS analyses. An excellent reversible metal-to-insulator transition (MIT characteristics accompanied by an abrupt change in both electrical resistivity and optical infrared (IR transmittance was observed from the optimized sample. Remarkably, the transition temperature (TMIT deduced from the resistivity-temperature curve was reasonably consistent with that obtained from the temperature-dependent IR transmittance. Based on Raman measurement and XPS analyses, the observations were interpreted in terms of residual stresses and chemical stoichiometry. This achievement will be of great benefit for practical application of VO2-based smart windows.

  4. Infrared-transmittance tunable metal-insulator conversion device with thin-film-transistor-type structure on a glass substrate

    Science.gov (United States)

    Katase, Takayoshi; Endo, Kenji; Ohta, Hiromichi

    2017-05-01

    Infrared (IR) transmittance tunable metal-insulator conversion was demonstrated on a glass substrate by using thermochromic vanadium dioxide (VO2) as the active layer in a three-terminal thin-film-transistor-type device with water-infiltrated glass as the gate insulator. Alternative positive/negative gate-voltage applications induce the reversible protonation/deprotonation of a VO2 channel, and two-orders of magnitude modulation of sheet-resistance and 49% modulation of IR-transmittance were simultaneously demonstrated at room temperature by the metal-insulator phase conversion of VO2 in a non-volatile manner. The present device is operable by the room-temperature protonation in an all-solid-state structure, and thus it will provide a new gateway to future energy-saving technology as an advanced smart window.

  5. Properties of Vanadium-Doped Indium Oxide Deposited at Room Temperature as Transparent Conductor for Inverted Polymer Solar Cells

    Science.gov (United States)

    Choi, Min-Jun; Lim, Keun Yong; Park, Hyun-Woo; Kim, Han-Ki; Hwang, Do Kyung; Lim, Sung-Jin; Shim, Jae Won; Chung, Kwun-Bum

    2017-10-01

    The properties of vanadium-doped indium oxide (IVO) deposited at room temperature as a transparent conductor for inverted polymer solar cells have been investigated as a function of the vanadium doping concentration. IVO film prepared with V doping concentration of 0.03% showed optimal properties for use as a transparent conductor with figure of merit of 4.35 × 10-3 Ohm-1, related to altered band alignment between the Fermi level and conduction-band minimum. In the optimal optoelectrical conditions for the IVO film, performance optimization of PTB7:PC70BM inverted polymer solar cells resulted in maximum power conversion efficiency of 4.7 ± 0.4% under simulated air mass 1.5 global illumination at 100 mW/cm2.

  6. Speciation of vanadium in Chinese cabbage (Brassica rapa L.) and soils in response to different levels of vanadium in soils and cabbage growth.

    Science.gov (United States)

    Tian, Liyan; Yang, Jinyan; Alewell, Christine; Huang, Jen-How

    2014-09-01

    This study highlights the accumulation and speciation of vanadium in Chinese cabbage (Brassica rapa L.) in relation to the speciation of soil vanadium with pot experiments at 122-622mgVkg(-1) by spiking NH4VO3. Cabbage planting decreased the bioavailable and residual vanadium based on sequential extraction, leading to enrichment of oxalate-extractable vanadium in soils. The biomass production increased with increasing concentrations of soil vanadium from 122 to 372mgVkg(-1), probably due to the increasing nitrogen availability and low vanadium availability in our soils with a consequent low vanadium toxicity. Although the concentrations of root vanadium (14.4-24.9mgVkg(-1)) related positively with soil vanadium, the bio-dilution alleviated the increase of leaf vanadium (2.1-2.7mgVkg(-1)). The predominance of vanadium(IV) in leaves (∼60-80% of total vanadium) indicates bio-reduction of vanadium in Chinese cabbage, since the mobile vanadium in oxic soils was usually pentavalent. Approximately 15-20% of the leaf vanadium was associated with recalcitrant leaf tissues. The majority of leaf vanadium was water and ethanol extractable, which is considered mobile and may cause more toxic effects on Chinese cabbage. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Synthesis and characterization of titanium dioxide thin films deposited by laser ablation; Sintesis y caracterizacion de peliculas delgadas de TiO{sub 2} depositadas por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Escobar A, L.; Camps C, E.; Falcon B, T.; Carapia M, L.; Haro P, E.; Camacho L, M.A. [Departamento de Fisica, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

    2000-07-01

    In this work are presented the results obtained when TiO{sub 2} thin films were deposited using the laser ablation technique. Thin films were deposited at different substrate temperatures, and different oxygen pressures, with the purpose of studying the influence of this deposit parameters in the structural characteristics of the films obtained. The structural characterization was realized through Raman Spectroscopy and X-ray Diffraction (XRD), the surface morphology of the layers deposited was verified by Scanning Electron Microscopy (Sem). The results show that the films obtained are of TiO{sub 2} in rutile phase, getting this at low substrate temperatures, its morphology shows a soft surface with some spattered particles and good adherence. (Author)

  8. Optimal Location of Vanadium in Muscovite and Its Geometrical and Electronic Properties by DFT Calculation

    OpenAIRE

    Qiushi Zheng; Yimin Zhang; Tao Liu; Jing Huang; Nannan Xue; Qihua Shi

    2017-01-01

    Vanadium-bearing muscovite is the most valuable component of stone coal, which is a unique source of vanadium manufacture in China. Numbers of experimental studies have been carried out to destroy the carrier muscovite’s structure for efficient extraction of vanadium. Hence, the vanadium location is necessary for exploring the essence of vanadium extraction. Although most infer that vanadium may substitute for trivalent aluminium (Al) as the isomorphism in muscovite for the similar atomic rad...

  9. Vanadium Oxidation State Determination by X-Ray Absorption Spectroscopy

    Science.gov (United States)

    Duchesne, Marc A.; Nakano, Jinichiro; Hu, Yongfeng; MacLennan, Aimee; Hughes, Robin W.; Bennett, James; Nakano, Anna

    Vanadium is found in slags produced during metal refinement and fossil fuel combustion/gasification. The oxidation state of vanadium in slag has technological and environmental implications. For example, it may affect slag flow and refractory wear inside reactors, as well as leachability and toxicity of industrial by-products. Determination of vanadium's oxidation state in crystalline phases can be achieved via the widely adopted X-ray diffraction (XRD) technique. However, this technique does not provide information on vanadium in amorphous phases. The objective of this research is to determine the oxidation state of vanadium in petroleum coke gasification samples and laboratory samples using X-ray absorption spectroscopy (XAS) with Canadian Light Source's soft X-ray micro-characterization beamline (SXRMB). Linear combination fitting of XAS spectra with reference samples allowed quantitative determination of vanadium speciation.

  10. Extraction of Vanadium from Vanadium Slag Via Non-salt Roasting and Ammonium Oxalate Leaching

    Science.gov (United States)

    Li, Meng; Du, Hao; Zheng, Shili; Wang, Shaona; Zhang, Yang; Liu, Biao; Dreisinger, David Bruce; Zhang, Yi

    2017-10-01

    A clean method featuring non-salt roasting followed by (NH4)2C2O4 leaching to recover vanadium from vanadium slag was proposed. The carcinogenic Cr6+ compounds and exhaust gases were avoided, and the water generated from vanadate precipitation may be recycled and reused in this new leaching process. The leaching residues may be easily used by a blast furnace. Moreover, (NH4)2C2O4 solution was used as a leaching medium to avoid expensive and complicated ammonium controlling operations as a result of the stability of (NH4)2C2O4 at a high temperature. The transformation mechanisms of vanadium- and chromium-bearing phases were systematically investigated by x-ray diffraction analysis and scanning electron microscopy with energy-disperse x-ray spectrometry, respectively. In addition, the effects of oxygen concentration, roasting temperature, and holding time on vanadium recovery were investigated. Finally, the effects of leaching variables on the vanadium leaching rate were also examined.

  11. Discrepancy between theory and measurement of superconducting vanadium

    Science.gov (United States)

    Zheng, X. H.; Walmsley, D. G.

    2015-08-01

    We have extracted consistent phonon dispersion information out of rather inconsistent vanadium X-ray scattering data from synchrotron and vacuum tube sources. With this and a new theoretical approach we have made firm predictions for the tunnelling conductance of superconducting vanadium; it is in unusually poor agreement with experimentally measured values. We argue that the problem lies in the experimental measurement rather than the theory. The preparation of a suitable high quality tunnel barrier on vanadium represents an outstanding challenge.

  12. Modified lithium vanadium oxide electrode materials products and methods

    Science.gov (United States)

    Thackeray, Michael M.; Kahaian, Arthur J.; Visser, Donald R.; Dees, Dennis W.; Benedek, Roy

    1999-12-21

    A method of improving certain vanadium oxide formulations is presented. The method concerns fluorine doping formulations having a nominal formula of LiV.sub.3 O.sub.8. Preferred average formulations are provided wherein the average oxidation state of the vanadium is at least 4.6. Herein preferred fluorine doped vanadium oxide materials, electrodes using such materials, and batteries including at least one electrode therein comprising such materials are provided.

  13. Switch-on transient behavior of vanadium phthalocyanine based organic transistors

    Science.gov (United States)

    Wang, Lijuan; Liu, Guojun; Wang, Haibo; Song, De; Yu, Bo; Yan, Donghang

    2007-08-01

    The authors investigated the switch-on transient properties of p-type vanadium phthalocyanine (VOPc) transistors, which were fabricated by weak epitaxy growth on ordered para-sexiphenyl (p-6P) layer. The overshoot phenomenon of drain current had been observed in the VOPc /p-6P transistors, which was explained by the filling of carriers in traps of organic films. The small overshoot value of about 35% and transient duration time of 2ms demonstrated the low trap concentration in organic films, which were comparable to the reported hydrogenated amorphous-silicon thin-film transistors. Therefore, the VOPc /p-6P transistors can be applied in active matrix liquid crystal display as switch elements.

  14. XAS study of vanadium in fluid cracking catalysts

    Science.gov (United States)

    Woolery, G. L.; Chin, A. A.; Kirker, G. W.; Huss, A.

    1989-06-01

    X-ray absorption spectroscopy was used to investigate the oxidation state and local environment of vanadium in Fluid Catalytic Cracking (FCC) catalysts as a function of processing and deactivation conditions. Our results suggest that oxidation of vanadium to V+5 alone is not solely responsible for catalyst deactivation but that other factors such as vanadium location and mobility play a significant role in catalyst performance. Basic alkaline earth oxide passivators such as MgO were found to interact strongly with vanadium during the regeneration period leading to formation of a magnesium vanadate compound.

  15. Chemical speciation of vanadium in coal bottom Ash

    Energy Technology Data Exchange (ETDEWEB)

    Aydin, Firat; Aydin, Isil; Hamamci, Candan [Science Faculty, Chemistry Department, Dicle University, Diyarbakir (Turkey); Saydut, Abdurrahman [Engineering Faculty, Mining Engineering Department, Dicle University, Diyarbakir (Turkey); Gunduz, Beniz [Science Faculty, Chemistry Department, Selcuk University, Konya (Turkey)

    2012-04-15

    Chemical speciation of vanadium is important to understand the true nature of this element in the environment as well as its biochemical pathways. Sample pretreatment, preparation, and chemical speciation methods were applied for vanadium in coal bottom ash here. Two-stage microwave acid digestion was used to preparation of samples. Determination of vanadium was performed using inductively coupled plasma-optical emission spectrometry (ICP-OES). Speciation of vanadium was carried out using a seven-step sequential extraction procedure of the coal bottom ash each releasing species of vanadium: Water soluble, exchangeable, carbonate, reducible, oxidizable, sulfide, and residual fractions. Total vanadium concentration in the coal bottom ash is 701 mg kg{sup -1} d.w. The most abundant form of vanadium in coal bottom ash is residual fraction of vanadium (196 mg kg{sup -1} d.w.). Relative abundances of the remaining vanadium fractions in coal bottom ash are as follows: Reducible (176 mg kg{sup -1} d.w.) > sulfide (176 mg kg{sup -1} d.w.) > carbonate (85 mg kg{sup -1} d.w.) > oxidizable (50 mg kg{sup -1} d.w.) > water soluble (10.6 mg kg{sup -1} d.w.) > exchangeable (9.0 mg kg{sup -1} d.w.). (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  16. [Reseach on THz Time Domain Spectrum of Photo-Induced Insulator-Metal Phase Transition of VO₂ Films].

    Science.gov (United States)

    Wang, Chang-lei; Wu, Shuai; Li, Yan-feng; Liu, Bo-wen; Hu, Ming-lie; Chai, Lu; Xing, Qi-rong; Wang, Qing-yue

    2015-11-01

    Vanadium dioxide (VO₂) film will be phase-transitioned from insulator into metal, accompanied with dramatic change on conductivity, which is named as photo-induced insulator-metal phase transition. Such phase transition of VO₂ film has important application potentials in modulators or other functional devices for terahertz waves. In this paper, the transmission spectrum variations before and after the photo-induced insulator-metal phase transition of vanadium dioxide film are investigated, and the phase transition properties in terahertz(THz) region are analyzed. In the experiment, the phase transition of the VO₂ film was induced by a continuous wave (CW) laser source and a femtosecond (fs) laser source, respectively. Obvious changes on the THz waveforms were observed for the both mentioned means of excitation, and the amplitude attenuation, as well as the signal distortion, was intensified with the increase of the impinging optical power. The fast Fourier transform (FFT) spectra of the transmitted THz time-domain signals were analyzed and it was found that the amplitude of the transmitted spectrum decreased synchronously with the increase of the optical power, accompanied with deformation of the spectrum line shape at the same time. The reason was that the macroscopic dielectric properties of the VO₂ film approached gradually to that of a metal as laser power was increased. A parameter, transmission modulation function, was defined in the paper as the amplitude difference between the transmission spectra of the VO₂ film before and after the laser excitation, to describe the dispersivity of the photo-induced phase transition more clearly. From the curve of the transmission modulation function, strong frequency-dependent properties at THz frequencies were found to vary regularly with the incident light power. After furthermore comparison, it was found that, though the insulator-metal phase transition could be trigged by both CW laser source and fs laser

  17. Microadditions of boron and vanadium in ADI

    Directory of Open Access Journals (Sweden)

    Rzychoń T.

    2007-01-01

    Full Text Available In the second part of the study, describing the role of vanadium and boron microadditions in the process of structure formation in heavy-walled castings made from ADI, the results of own investigations were presented. Within this study two series of melts of the ductile iron were made, introducing microadditions of the above mentioned elements to both unalloyed ductile iron and the ductile iron containing high levels of nickel and copper (the composition typical of ADI. Melts were conducted with iron-nickel-magnesium master alloy. Thermal analysis of the solidification process of the cast keel blocks was conducted, the heat treatment of the alloys was carried out, and then the effect of the introduced additions of boron and vanadium on the hardenability of the investigated cast iron was examined and evaluated.

  18. Vanadium in fuel oil - a new solution

    Energy Technology Data Exchange (ETDEWEB)

    Czech, N. [Siemens, Muelheim (Germany); Finckh, H. [Siemens, Erlangen (Germany)

    1998-11-01

    Hot corrosion of the hot-gas-path components due to vanadium contamination is one of the hazards associated with heavy residual oil combustion in heavy-duty gas turbines. This economically attractive oil combustion process has benefited from the recently developed vanadium inhibition technique, which is currently being tested at the Valladolid 220 MWe combined cycle plant in Mexico. The method uses atomization of a dilute aqueous solution of Epsom salt (MgSO{sub 7},7H{sub 2}O) into very small droplets which are then injected onto the flame where intensive mixing takes place. The successful use of this new technique promises extended operating periods between cleanup operations, and cost reductions from the use of inexpensive materials, as well as the ability to operate advanced gas turbines on difficult fuels, not previously feasible. (UK)

  19. Irradiation creep of vanadium-base alloys

    Energy Technology Data Exchange (ETDEWEB)

    Tsai, H.; Billone, M.C.; Strain, R.V.; Smith, D.L. [Argonne National Lab., IL (United States); Matsui, H. [Tohoku Univ. (Japan)

    1998-03-01

    A study of irradiation creep in vanadium-base alloys is underway with experiments in the Advanced Test Reactor (ATR) and the High Flux Isotope Reactor (HFIR) in the United States. Test specimens are thin-wall sealed tubes with internal pressure loading. The results from the initial ATR irradiation at low temperature (200--300 C) to a neutron damage level of 4.7 dpa show creep rates ranging from {approx}0 to 1.2 {times} 10{sup {minus}5}/dpa/MPa for a 500-kg heat of V-4Cr-4Ti alloy. These rates were generally lower than reported from a previous experiment in BR-10. Because both the attained neutron damage levels and the creep strains were low in the present study, however, these creep rates should be regarded as only preliminary. Substantially more testing is required before a data base on irradiation creep of vanadium alloys can be developed and used with confidence.

  20. Microadditions of boron and vanadium in ADI

    OpenAIRE

    Rzychoń T.; Kiełbus A.; Szala J.

    2007-01-01

    In the second part of the study, describing the role of vanadium and boron microadditions in the process of structure formation in heavy-walled castings made from ADI, the results of own investigations were presented. Within this study two series of melts of the ductile iron were made, introducing microadditions of the above mentioned elements to both unalloyed ductile iron and the ductile iron containing high levels of nickel and copper (the composition typical of ADI). Melts were conducted ...

  1. Controlled synthesis and electrochemical properties of vanadium ...

    Indian Academy of Sciences (India)

    Vanadium oxides (V3O7.H2O and VO2) with different morphologies have been selectively synthesized by a facile hydrothermal approach using glucose as the reducing and structure-directing reagent. The as-obtained V3O7.H2O nanobelts have a length up to several tens of micrometers, width of about 60–150 nm and ...

  2. Determination of Leachable Vanadium (V) in Sediment

    African Journals Online (AJOL)

    NICO

    USA) were used for the filtration of sample solutions. RESEARCH ... were transferred to a Teflon beaker and treated on a hot plate at about 110 °C ... Table 1 Thermal programme for the determination of vanadium using. ET-AAS. Step. Temperature/°C. Ramp/s–1. Hold/s–1. Internal gas flow/mL min–1. 1. 120. 1. 10. 250. 2.

  3. Characterization of vanadium flow battery. Revised

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, H.; Ekman, C.; Gehrke, O.; Isleifsson, F.

    2011-02-15

    This report summarizes the work done at Risoe-DTU testing a vanadium flow battery as part of the project ''Characterisation of Vanadium Batteries'' (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risoe DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses are power conversion in cell stacks/electrolyte, power converter, and auxiliary power consumption from pumps and controller. The efficiency was not influenced by the cycling of the battery. The response time for the battery is limited at 20kW/s by the ramp rate of the power converter. The battery can thus provide power and frequency support for the power system. The battery was operated together with a 11kW stall-regulated Gaia wind turbine to smooth the output of the wind turbine and during the tests the battery proved capable of firming the output of the wind turbine. Vanadium battery is a potential technology for storage based services to the power system provided investment and O and M cost are low enough and long term operation is documented. (Author)

  4. Vanadium proton exchange membrane water electrolyser

    Science.gov (United States)

    Noack, Jens; Roznyatovskaya, Nataliya; Pinkwart, Karsten; Tübke, Jens

    2017-05-01

    In order to reverse the reactions of vanadium oxygen fuel cells and to regenerate vanadium redox flow battery electrolytes that have been oxidised by atmospheric oxygen, a vanadium proton exchange membrane water electrolyser was set up and investigated. Using an existing cell with a commercial and iridium-based catalyst coated membrane, it was possible to fully reduce V3.5+ and V3+ solutions to V2+ with the formation of oxygen and with coulomb efficiencies of over 96%. The cell achieved a maximum current density of 75 mA/cm2 during this process and was limited by the proximity of the V(III) reduction to the hydrogen evolution reaction. Due to the specific reaction mechanisms of V(IV) and V(III) ions, V(III) solutions were reduced with an energy efficiency of 61%, making this process nearly twice as energy efficient as the reduction of V(IV) to V(III). Polarisation curves and electrochemical impedance spectroscopy were used to further investigate the losses of half-cell reactions and to find ways of further increasing efficiency and performance levels.

  5. Vanadium oxide/polypyrrole aerogel nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Dave, B.C.; Dunn, B.S.; Wong, H.P. [Univ. of California, Los Angeles, CA (United States). Dept. of Materials Science and Engineering; Leroux, F.; Nazar, L.F. [Univ. of Waterloo, Ontario (Canada). Dept. of Chemistry

    1996-12-31

    Vanadium pentoxide/polypyrrole aerogel (ARG) nanocomposites were prepared by hydrolysis of VO(OC{sub 3}H{sub 7}){sub 3} using pyrrole/water/acetone mixtures. Monolithic green-black gels with polypyrrole/V ratios ranging from 0.15 to 1.0 resulted from simultaneously polymerization of the pyrrole and vanadium alkoxide precursors. Supercritical drying yielded high surface (150--200 m{sup 2}/g) aerogels, of sufficient mechanical integrity to allow them to be cut without fracturing. TEM studies of the aerogels show that they are comprised of fibers similar to that of V{sub 2}O{sub 5} ARG`s, but with a much shorter chain length. Evidence from IR that the inorganic and organic components strongly interact leads them to propose that this impedes the vanadium condensation process. The result is ARG`s that exhibit decreased electronic conductivity with increasing polymer content. Despite the unexpected deleterious effect of the conductive polymer on the bulk conductivity, at low polymer content, the nanocomposite materials show enhanced electrochemical properties for Li insertion compared to the pristine aerogel.

  6. An extraction process to recover vanadium from low-grade vanadium-bearing titanomagnetite.

    Science.gov (United States)

    Chen, Desheng; Zhao, Hongxin; Hu, Guoping; Qi, Tao; Yu, Hongdong; Zhang, Guozhi; Wang, Lina; Wang, Weijing

    2015-08-30

    An extraction process to recover vanadium from low-grade vanadium-bearing titanomagnetite was developed. In this study, a mixed solvent system of di(2-ethylhexyl) phosphate (D2EHPA) and tri-n-butyl phosphate (TBP) diluted with kerosene was used for the selective extraction of vanadium from a hydrochloric acid leaching solution that contained low vanadium concentration with high concentrations of iron and impurities of Ca, Mg, and Al. In the extraction process, the initial solution pH and the phase ratio had considerable functions in the extraction of vanadium from the hydrochloric acid leaching solution. Under optimal extraction conditions (i.e., 30-40°C for 10min, 1:3 phase ratio (O/A), 20% D2EHPA concentration (v/v), and 0-0.8 initial solution pH), 99.4% vanadium and only 4.2% iron were extracted by the three-stage counter-current extraction process. In the stripping process with H2SO4 as the stripping agent and under optimal stripping conditions (i.e., 20% H2SO4 concentration, 5:1 phase ratio (O/A), 20min stripping time, and 40°C stripping temperature), 99.6% vanadium and only 5.4% iron were stripped by the three-stage counter-current stripping process. The stripping solution contained 40.16g/LV2O5,0.691g/L Fe, 0.007g/L TiO2, 0.006g/L SiO2 and 0.247g/L CaO. A V2O5 product with a purity of 99.12% V2O5 and only 0.026% Fe was obtained after the oxidation, precipitation, and calcination processes. The total vanadium recovered from the hydrochloric acid leaching solution was 85.5%. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Polymorph separation induced by angle distortion and electron delocalization effect via orbital modification in V O2 epitaxial thin films

    Science.gov (United States)

    Hong, Bin; Hu, Kai; Tao, Zhuchen; Zhao, Jiangtao; Pan, Nan; Wang, Xiaoping; Lu, Minghui; Yang, Yuanjun; Luo, Zhenlin; Gao, Chen

    2017-02-01

    Since Morin discovered that vanadium dioxide (V O2 ) undergoes a reversible and dramatic structural phase transition coupled with an abrupt metal-insulator transition, extensive attention has been paid to V O2 due to its importance in fundamental condensed state physics and its potential technological applications. Here, we observed that the precipitated phases of V O2 (insulating and metallic polymorphs) could be controlled by relaxing the dimerization of the vanadium-vanadium (V-V) atomic chain. In particular, the monoclinic metallic phase can be stabilized even at room temperature with the assistance of the angle-distortion-induced (β =120∘ ) metallization through symmetry matching between the V O2 epitaxial thin films and the (0001)-oriented sapphire substrates. Concomitantly, the insulating phase (M1 ,β =122 .6∘ ) that separates from the metallic matrix may supply another driving force for stabilizing the metallic phase, as indicated by scattering-type scanning near-field optical infrared microscopy and further confirmed by synchrotron radiation high-resolution x-ray diffraction characterizations. Soft x-ray absorption spectroscopy results showed that the orbital features of the monoclinic metallic phase are analogous to those of the high-temperature metallic rutile V O2 (R) phase. First-principles calculations further demonstrate the angle-distortion-induced reduction of the V-V atomic dimerization, which enhances the electron delocalization and thus the conductivity. Therefore, the angle distortion results in the metallic monoclinic phase and stabilizes it with the assistance of the nanoscale insulating V O2 (M1) domains at room temperature. These results are of great importance for understanding the contributions of various polymorphs to the metal-insulator transition and for the design of novel artificially heterointerfacial devices based on V O2 nanoscale polymorphs.

  8. Analysis of the properties of functional titanium dioxide thin films deposited by pulsed DC magnetron sputtering with various O2:Ar ratios

    Science.gov (United States)

    Mazur, Michal

    2017-07-01

    For the purpose of thin film preparation, pulsed DC magnetron sputtering process was performed and various O2:Ar gas ratios were applied during deposition. Structural properties of thin films deposited with various sputtering atmospheres were determined based on the results of the x-ray diffraction method and Raman spectroscopy, which revealed that all coatings were nanocrystalline and had anatase or rutile structure. The surface morphology of the coatings were investigated with the aid of a scanning electron microscopy and atomic force microscopy. Surface properties were evaluated by x-ray photoelectron spectroscopy and wettability measurements. It was revealed that an increase of Ar amount in the sputtering gas atmosphere caused as a result an increase of thin film water contact angle and enhanced ability of the surface to adsorb water molecules and hydroxyl radicals. Optical properties evaluated on the basis of transmission and reflection measurements showed that all coatings were transparent in the visible wavelength range, but had different refractive index, porosity and packing density. The mechanical properties of the obtained coatings were determined on the basis of nanoindentation tests. Prepared TiO2 thin films had different surface, optical and mechanical properties depending on the gas atmosphere during deposition.

  9. Kinetics of Vanadium Extraction from Hot Metal by Basic Slag

    Science.gov (United States)

    Zhang, Tao; Xie, Bing; Liu, Xuan; Diao, Jiang; Zhang, Zhen; Li, Hong-Yi

    Extracting vanadium from vanadium containing hot metal by LD process has been proven an effective solution for the utilization of vanadium-titanium magnetite ore, but the systematic analyses of vanadium extraction rate and mechanism by basic slag are seldom reported. In this study, mathematical model of vanadium transfer from metal to slag was formulated and the rates of vanadium extraction of hot metal with basic slag were investigated. The results indicated that the apparent vanadium extraction rate constant, k p , were in the range of 1.33˜9.07×10-4g/(cm3·s). And the rate constant was increased with the increase of final slag basicity, reaction temperature and stirring gas flow. The apparent of mass transfer parameter decreases significantly from 0.13 cm3/ s to 0 cm3/ s in 20min, and the data changed as negative due to the decrease of slag oxidation and recovery of vanadium from slag to metal.

  10. Fragility–structure–conductivity relations in vanadium tellurite glass

    DEFF Research Database (Denmark)

    Kjeldsen, Jonas; Yue, Yuanzheng; Rodrigues, Ana Candida Martins

    the ability to intercalate lithium-ions, it is a candidate as cathode material. Here, we investigate the correlation between liquid fragility, structure and electronic conductivity in a series of vanadium-tellurite glasses with varying vanadium concentration. We measure dynamic and thermodynamic fragility...

  11. Combined effect of vanadium and nickel on lipid peroxidation and ...

    African Journals Online (AJOL)

    use

    2011-12-12

    Dec 12, 2011 ... Signs of toxicity were observed following treatment with vanadium, not nickel nor combined vanadium and .... Kazakhstan. Animal treatment. Outbred 3-month-old male albino rats, weighing between 230 to. 235 g (mean) at the beginning of experiment, were obtained from ..... Vitamin E supplementation.

  12. Vanadium Extraction from Shale via Sulfuric Acid Baking and Leaching

    Science.gov (United States)

    Shi, Qihua; Zhang, Yimin; Liu, Tao; Huang, Jing

    2018-01-01

    Fluorides are widely used to improve vanadium extraction from shale in China. Sulfuric acid baking-leaching (SABL) was investigated as a means of recovering vanadium which does not require the use of fluorides and avoids the productions of harmful fluoride-containing wastewater. Various effective factors were systematically studied and the experimental results showed that 90.1% vanadium could be leached from the shale. On the basis of phase transformations and structural changes after baking the shale, a mechanism of vanadium extraction from shale via SABL was proposed. The mechanism can be described as: (1) sulfuric acid diffusion into particles; (2) the formation of concentrated sulfuric acid media in the particles after water evaporation; (3) hydroxyl groups in the muscovite were removed and transient state [SO4 2-] was generated; and (4) the metals in the muscovite were sulfated by active [SO4 2-] and the vanadium was released. Thermodynamics modeling confirmed this mechanism.

  13. Exploring electrolyte preference of vanadium nitride supercapacitor electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Bo; Chen, Zhaohui; Lu, Gang [Department of Electrical Engineering and Automation, Luoyang Institute of Science and Technology, Luoyang 471023 (China); Wang, Tianhu [School of Electrical Information and Engineering, Jiangsu University of Technology, Changzhou 213001 (China); Ge, Yunwang, E-mail: ywgelit@126.com [Department of Electrical Engineering and Automation, Luoyang Institute of Science and Technology, Luoyang 471023 (China)

    2016-04-15

    Highlights: • Hierarchical VN nanostructures were prepared on graphite foam. • Electrolyte preference of VN supercapacitor electrodes was explored. • VN showed better capacitive property in organic and alkaline electrolytes than LiCl. - Abstract: Vanadium nitride hierarchical nanostructures were prepared through an ammonia annealing procedure utilizing vanadium pentoxide nanostructures grown on graphite foam. The electrochemical properties of hierarchical vanadium nitride was tested in aqueous and organic electrolytes. As a result, the vanadium nitride showed better capacitive energy storage property in organic and alkaline electrolytes. This work provides insight into the charge storage process of vanadium nitride and our findings can shed light on other transition metal nitride-based electrochemical energy storage systems.

  14. 40 CFR 440.30 - Applicability; description of the uranium, radium and vanadium ores subcategory.

    Science.gov (United States)

    2010-07-01

    ... for the extraction of uranium, radium and vanadium. Only vanadium byproduct production from uranium... uranium, radium and vanadium ores subcategory. 440.30 Section 440.30 Protection of Environment... SOURCE CATEGORY Uranium, Radium and Vanadium Ores Subcategory § 440.30 Applicability; description of the...

  15. Conceptual chemistry approach towards the support effect in supported vanadium oxides: valence bond calculations on the ionicity of vanadium catalysts

    NARCIS (Netherlands)

    Fievez, T.; De Proft, F.; Geerlings, P.; Weckhuysen, B.M.; Havenith, R.W.A.

    2011-01-01

    The concept of bond ionicity, obtained via a valence bond analysis, is invoked in the interpretation of the catalytic activity of supported vanadium oxides, in analogy with previous work conducted within the framework of conceptual DFT. For a set of model clusters representing the vanadium oxide

  16. Conceptual chemistry approach towards the support effect in supported vanadium oxides : Valence bond calculations on the ionicity of vanadium catalysts

    NARCIS (Netherlands)

    Fievez, Tim; De Proft, Frank; Geerlings, Paul; Weckhuysen, Bert M.; Havenith, Remco W. A.

    2011-01-01

    The concept of bond ionicity, obtained via a valence bond analysis, is invoked in the interpretation of the catalytic activity of supported vanadium oxides, in analogy with previous work conducted within the framework of conceptual DFT. For a set of model clusters representing the vanadium oxide

  17. Enhancement Corrosion Resistance of (γ-Glycidyloxypropyl-Silsesquioxane-Titanium Dioxide Films and Its Validation by Gas Molecule Diffusion Coefficients Using Molecular Dynamics (MD Simulation

    Directory of Open Access Journals (Sweden)

    Haiyan Wang

    2014-01-01

    Full Text Available Based on silsesquioxanes (SSO derived from the hydrolytic condensation of (γ-glycidyloxypropyltrimethoxysilane (GPMS and titanium tetrabutoxide (TTB, hybrid films on aluminum alloy (AA, film-GPMS-SSO (f-GS and f-GS-TTBi% (f-GSTT5%–25%, i = 5, 10, 15, 20 and 25 wt%, were prepared and tested by electrochemical measurements with typical potentiodynamic polarization curves. The Icorr values of the samples were significantly lower, comparing with the Icorr values of the f-GS, AA and f-GS modified tetraethoxysilane (TEOS in the previous study, which implies that the TTB5%–25% (TiO2 additions in the coatings indeed enhance the electrochemical corrosion resistance. Correlations between the film structures and anticorrosion properties were discussed. To validate the corresponding anticorrosion experiment results, different 3D-amorphous cubic unit cells were employed as models to investigate the self-diffusion coefficient (SDC for SO2, NO2 and H2O molecules by molecular dynamics (MD simulation. All of the SDCs calculated for SO2, NO2 and H2O diffusing in f-GSTT5%–25% cells were less than the SDCs in f-GS. These results validated the corresponding anticorrosion experiment results.

  18. Morphology, Electrical Performance and Potentiometry of PDIF-CN2 Thin-Film Transistors on HMDS-Treated and Bare Silicon Dioxide

    Directory of Open Access Journals (Sweden)

    Fabio Chiarella

    2014-02-01

    Full Text Available In this work, the electrical response of n-type organic field-effect transistors, achieved by evaporating PDIF-CN2 films on both bare and Hexamethyldisilazane (HMDS treated SiO2 substrates, was investigated by standard electrical characterization and potentiometry. Morphological and charge transport characterizations demonstrated that the hydrophobic degree of the substrate surface has a huge impact on the final response of the devices. The PDIF-CN2 transistors on HMDS-treated substrates show a maximum mobility of 0.7 cm2/Volt·s, three orders of magnitude greater than in the case of the device without surface functionalization. The scanning Kelvin probe microscopy technique was used to perform surface potentiometry to image the local surface potential inside the channel during the transistor operation and has allowed us to identify the film morphological disorder as the primary factor that could compromise the effectiveness of the charge injection process from gold contacts to PDIF-CN2 films. For optimized devices on HMDS-treated substrates, SKPM was also used to analyze, over time, the evolution of the potential profile when negative VGS voltages were applied. The findings of these measurements are discussed taking into account the role of VGS-induced proton migration towards SiO2 bulk, in the operational stability of the device.

  19. Vanadium as barrier to prevent inter diffusion between metallic fuel and clad material

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kang Soo; Lee, Seok Hee; Kalita, Deep Jyoti; Woo, Sung Pil; Yoon, Young Soo [Yonsei Univ., Shinchondong, Seoul (Korea, Republic of); Kim, Jun Hwan; Baek, Jong Hyuk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2012-10-15

    Sodium cooled Fast Reactor (SFR) has been considered as next generation nuclear reactor because of its ability of recycling nuclear fuel. Specially, U Zr metal fuel in nuclear reactor has advantages such as ease of fabrication, high thermal conductivity, proliferation resistance and a good stability for sodium which have proven efficient in extending the fusion possibility. In spite of advantages, metal fuel can be inconvenient to use cladding. Actinide elements cause a FCCI (Fuel Clad Chemical Interaction) and eutectic reaction with Fe as nuclear cladding components at just above 650 .deg. C. Since nuclear cladding thickness is decreased during the combusting U Zr metal fuel, the interaction place in the cladding is brittle and less strength. It was reported that the eutectic melting between U Pu Zr and Fe occurs above 650 .deg. C. For such reasons, liner related materials and process have been studied by many research groups. In order to apply this nuclear cladding liner, Zr and V metals show better properties to preventing FCCI. Although liner materials prevent FCCI to an extent, it cannot block it perfectly. In this study, we attempt a combination of vanadium (V) and vanadium foil double layer in between a 420J2(Fe based 12Cr steel) and misch metal. The V thin film was deposited with various RF power. The results of diffusion couple tests at 660 .deg. C for 25 hours showed that a combination of the V thin films and foil exhibited a better shielding for FCCI.

  20. Hydrothermal Synthesis of Nanostructured Vanadium Oxides

    Directory of Open Access Journals (Sweden)

    Jacques Livage

    2010-08-01

    Full Text Available A wide range of vanadium oxides have been obtained via the hydrothermal treatment of aqueous V(V solutions. They exhibit a large variety of nanostructures ranging from molecular clusters to 1D and 2D layered compounds. Nanotubes are obtained via a self-rolling process while amazing morphologies such as nano-spheres, nano-flowers and even nano-urchins are formed via the self-assembling of nano-particles. This paper provides some correlation between the molecular structure of precursors in the solution and the nanostructure of the solid phases obtained by hydrothermal treatment.

  1. Noble metals nanoparticles on titanium dioxide nanostructured films and the influence of their photocatalytic activity; Atividade fotocatalitica de filmes nanoestruturados de dioxido de titanio incorporados com nanoparticulas de metais nobres

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, Liana Key Okada

    2012-07-01

    Currently, nanoscience and nanotechnology are considered an emerging field and continuously breaking the barrier among various disciplines. The main focus of study involves controlling structures at molecular level, arranging the atoms in order to achieve an understanding and controlling the fundamental properties of matter. In this study, molecular changes on the basis of morphology, optical and crystalline properties of TiO{sub 2}hin films in order to increase their photon efficiency were proposed. The TiO{sub 2} thin films were prepared by sol gel process evaluating the influence of different acids and templates to obtain the nano structured arrangements. Then, metal nanoparticles like Au, Ag, Pd and Pt were incorporated on TiO{sub 2} thin films. This incorporation might minimize the electron-hole recombination, so it could improve the photon efficiency. From the several routes studied, the TiO{sub 2} thin films prepared with acetic acid showed the best performance by the reason of low agglomeration of TiO{sub 2} grains, which favors the exposure of the photoactive sites. The presence of template in the formulation had a slightly effect on photon efficiency, possible due to the higher agglomeration of the grains on the TiO{sub 2} thin films. The addition of Pt and Au nanoparticles on TiO{sub 2} thin films showed superior photon efficiency. The TiO{sub 2} thin films with hexamine and metallic nanoparticles did not show the improvement on photon efficiency except for Pt and Au nanoparticles. On these situations, the improvement on photon efficiency is might be due to a possible decrease at the electron-hole recombination's velocity. Thus, the present work demonstrates the great influence of preparation conditions on the optical, morphological properties and the photon efficiency. In the future, with greater understanding of the mechanism of this influence, the properties of TiO{sub 2} thin films will be able tailoring depending on the application. (author)

  2. Thermolysis of Half-Sandwich Vanadium(V) Imido Complexes to Generate Vanadium(III) Imido Species via a Vanadium(IV) Intermediate

    NARCIS (Netherlands)

    Batinas, Aurora A.; Dam, Jeroen; Meetsma, Auke; Hessen, Bart; Bouwkamp, Marco W.

    2010-01-01

    Thermolysis of half-sandwich vanadium imido complexes Cp(RN)V(i-Pr(2)N)Me (R = p-Tol, 1a; R = t-Bu, 1b) results in a mixture of products, including vanadium(IV) dimers [CpVMe](2)(mu-RN)(2), i-Pr(2)NH, i-PrNCMe(2), CH(4), and one or more paramagnetic species. In the presence of dmpe (dmpe =

  3. Microstructure and thermochromic properties of VOX-WOX-VOX ceramic thin films

    Science.gov (United States)

    Khamseh, S.; Araghi, H.; Ghahari, M.; Faghihi Sani, M. A.

    2016-03-01

    W-doped VO2 films have been synthesized via oxygen annealing of V-W-V (vanadium-tungsten-vanadium) multilayered films. The effects of middle layer's thickness of V-W-V multilayered film on structure and properties of VOX-WOX-VOX ceramic thin films were investigated. The as-deposited V-W-V multilayered film showed amorphous-like structure when mixed structure of VO2 (M) and VO2 (B) was formed in VOX-WOX-VOX ceramic thin films. Tungsten content of VOX-WOX-VOX ceramic thin films increased with increasing middle layer's thickness. With increasing middle layer's thickness, room temperature square resistance ( R sq) of VOX-WOX-VOX ceramic thin films increased from 65 to 86 kΩ/sq. The VOX-WOX-VOX ceramic thin film with the thinnest middle layer showed significant SMT (semiconductor-metal transition) when SMT became negligible on increasing middle layer's thickness.

  4. On the regiospecificity of vanadium bromoperoxidase.

    Science.gov (United States)

    Martinez, J S; Carroll, G L; Tschirret-Guth, R A; Altenhoff, G; Little, R D; Butler, A

    2001-04-11

    Vanadium haloperoxidase enzymes catalyze the oxidation of halide ions by hydrogen peroxide, producing an oxidized intermediate, which can halogenate an organic substrate or react with a second equivalent of hydrogen peroxide to produce dioxygen. Haloperoxidases are thought to be involved in the biogenesis of halogenated natural products isolated from marine organisms, including indoles and terpenes, of which many are selectively oxidized or halogenated. Little has been shown concerning the ability of the marine haloperoxidases to catalyze regioselective reactions. Here we report the regiospecific bromoperoxidative oxidation of 1,3-di-tert-butylindole by V-BrPO from the marine algae Ascophyllum nodosum and Corallina officinalis. Both enzymes catalyze the regiospecific oxidation of 1,3-di-tert-butylindole in a reaction requiring both H(2)O(2) and Br(-) as substrates, but which produce the unbrominated 1,3-di-tert-butyl-2-indolinone product exclusively, in near quantitative yield (i.e. one H(2)O(2) consumed per product). By contrast, reactions with the controlled addition of aqueous bromine solution (HOBr = Br(2) = Br(3)(-)) produce three monobromo and one dibromo-2-indolinone products, all of which differ from the V-BrPO-catalyzed product. Further, reactivities of 1,3-di-tert-butyl-2-indolinone with both aqueous bromine and V-BrPO differ significantly and shed light onto the possible nature of the oxidizing intermediate. This is the first example of a regiospecific bromination by a vanadium haloperoxidase and further extends their usefulness as catalysts.

  5. Platinum-Vanadium Oxide Nanotube Hybrids

    Science.gov (United States)

    Mello, Filipe L. S.; Costa, Lídia O. O.; Hernández, Eduardo Padrón; de Farias, Andréa M. Duarte; Fraga, Marco A.

    2010-06-01

    The present contribution reports on the features of platinum-based systems supported on vanadium oxide nanotubes. The synthesis of nanotubes was carried out using a commercial vanadium pentoxide via hydrothermal route. The nanostructured hybrid materials were prepared by wet impregnation using two different platinum precursors. The formation of platinum nanoparticles was evaluated by applying distinct reduction procedures. All nanostructured samples were essentially analysed by X-ray diffraction and transmission electron microscopy. After reduction, transmission electron microscopy also made it possible to estimate particle size distribution and mean diameter calculations. It could be seen that all reduction procedures did not affect the nanostructure of the supports and that the formation of metallic nanoparticles is quite efficient with an indistinct distribution along the nanotubes. Nevertheless, the reduction procedure determined the diameter, dispersion and shape of the metallic particles. It could be concluded that the use of H2PtCl6 is more suitable and that the use of hydrogen as reducing agent leads to a nanomaterial with unagglomerated round-shaped metallic particles with mean size of 6-7 nm.

  6. Platinum–Vanadium Oxide Nanotube Hybrids

    Directory of Open Access Journals (Sweden)

    Hernández EduardoPadrón

    2010-01-01

    Full Text Available Abstract The present contribution reports on the features of platinum-based systems supported on vanadium oxide nanotubes. The synthesis of nanotubes was carried out using a commercial vanadium pentoxide via hydrothermal route. The nanostructured hybrid materials were prepared by wet impregnation using two different platinum precursors. The formation of platinum nanoparticles was evaluated by applying distinct reduction procedures. All nanostructured samples were essentially analysed by X-ray diffraction and transmission electron microscopy. After reduction, transmission electron microscopy also made it possible to estimate particle size distribution and mean diameter calculations. It could be seen that all reduction procedures did not affect the nanostructure of the supports and that the formation of metallic nanoparticles is quite efficient with an indistinct distribution along the nanotubes. Nevertheless, the reduction procedure determined the diameter, dispersion and shape of the metallic particles. It could be concluded that the use of H2PtCl6 is more suitable and that the use of hydrogen as reducing agent leads to a nanomaterial with unagglomerated round-shaped metallic particles with mean size of 6–7 nm.

  7. Imaging of Hydrophilicity and its Inhomogeneity on a Titanium Dioxide Film Exposed to Ultraviolet Irradiation Using a Newly Developed Near-Infrared Camera.

    Science.gov (United States)

    Tanabe, Ichiro; Ishikawa, Daitaro; Furukawa, Daiki; Ishigaki, Mika; Goto, Takeyoshi; Morishima, Tetsu; Okuno, Toshiaki; Ozaki, Yukihiro

    2015-11-01

    This study has investigated hydrophilicity changes and their inhomogeneity of TiO2 films on Pyrex glasses by near-infrared (NIR) spectral imaging. Near-infrared spectra of TiO2 films in the 9000-4000 cm(-1) region were measured using a newly developed NIR camera named Compovision. A band in the 5400-4800 cm(-1) region, which is assigned to a combination (ν2 + ν3) mode of bending (ν2) and antisymmetric stretching (ν3) modes of the H2O molecule, was clearly identified and its intensity increased with time in the air. It is interesting that the increased rate rose with ultraviolet (UV) light irradiation (300-400 nm, 1 mW cm(-2)) compared to without UV light irradiation. This result suggested that the hydrophilicity of TiO2 was enhanced about twice upon the UV light irradiation. Moreover, the NIR images clarified spatial distributions of the hydrophilicity on the TiO2 surface with a significantly wide area (20 × 40 mm) and a high speed (within 5 s for one image). This rapid imaging system enabled us to detect the hydrophilicity change during only 1 min. The potential of this camera is quite superior, not only for basic research, but also for diverse industrial applications.

  8. Adsorption, desorption, and film formation of quinacridone and its thermal cracking product indigo on clean and carbon-covered silicon dioxide surfaces

    Science.gov (United States)

    Scherwitzl, Boris; Lassnig, Roman; Truger, Magdalena; Resel, Roland; Leising, Günther; Winkler, Adolf

    2016-09-01

    The evaporation of quinacridone from a stainless steel Knudsen cell leads to the partial decomposition of this molecule in the cell, due to its comparably high sublimation temperature. At least one additional type of molecules, namely indigo, could be detected in the effusion flux. Thermal desorption spectroscopy and atomic force microscopy have been used to study the co-deposition of these molecules on sputter-cleaned and carbon-covered silicon dioxide surfaces. Desorption of indigo appears at temperatures of about 400 K, while quinacridone desorbs at around 510 K. For quinacridone, a desorption energy of 2.1 eV and a frequency factor for desorption of 1 × 1019 s-1 were calculated, which in this magnitude is typical for large organic molecules. A fraction of the adsorbed quinacridone molecules (˜5%) decomposes during heating, nearly independent of the adsorbed amount, resulting in a surface composed of small carbon islands. The sticking coefficients of indigo and quinacridone were found to be close to unity on a carbon covered SiO2 surface but significantly smaller on a sputter-cleaned substrate. The reason for the latter can be attributed to insufficient energy dissipation for unfavorably oriented impinging molecules. However, due to adsorption via a hot-precursor state, the sticking probability is increased on the surface covered with carbon islands, which act as accommodation centers.

  9. Vanadium and nickel in petroleums of bituminous Tatar rocks

    Energy Technology Data Exchange (ETDEWEB)

    Aigistova, S.Kh.; Safiullina, G.Kh.; Sadykov, A.N.; Kharlamov, V.A.

    1984-01-01

    The vanadium and nickel contents of petroleum obtained from bituminous rock of Ashal'chinsk, Akhmat, Gorskii, Katerchinsk, Klinsk (Studeno-Klyuchev), West-Chumachkin, Mordovian-Karmal' and Pokrov deposits, was determined polarographically. The vanadium concentration range in these petroleums is 0.01-0.09 and nickel 0.009-0.05 wt.%. According to results previously obtained, vanadium and nickel contents in ordinary petroleum of this country are no higher than 0.010 and 0.0014 wt.%, respectively. 3 references, 1 table.

  10. Vanadium-base alloys for fusion reactor applications

    Energy Technology Data Exchange (ETDEWEB)

    Smith, D.L.; Loomis, B.A.; Diercks, D.R.

    1984-10-01

    Vanadium-base alloys offer potentially significant advantages over other candidate alloys as a structural material for fusion reactor first wall/blanket applications. Although the data base is more limited than that for the other leading candidate structural materials, viz., austenitic and ferritic steels, vanadium-base alloys exhibit several properties that make them particularly attractive for the fusion reactor environment. This paper presents a review of the structural material requirements, a summary of the materials data base for selected vanadium-base alloys, and a comparison of projected performance characteristics compared to other candidate alloys. Also, critical research and development (R and D) needs are defined.

  11. Vanadium - investigations on supply and demand of mineral raw materials

    Energy Technology Data Exchange (ETDEWEB)

    Eggert, P.; Kippenberger, C.; Kruszona, M.; Schmidt, H.; Wettig, E.

    1981-11-01

    Conclusions which are drawn in the latest report of the Federal Institute for Geosciences and Mineral Resources, Hanover, and the German Institute for Economic Research, Berlin, on the steel additive vanadium are presented.

  12. Method to Remove Uranium/Vanadium Contamination from Groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Metzler, Donald R.; Morrison Stanley

    2004-07-27

    A process for removing uranium/vanadium-based contaminants from groundwater using a primary in-ground treatment media and a pretreatment media that chemically adjusts the groundwater contaminant to provide for optimum treatment by the primary treatment media.

  13. Exploring a novel approach to fabricate vanadium carbide ...

    Indian Academy of Sciences (India)

    -shell structure; composite materials; mesoporous material; solid-state reaction. ... A novel approach to the fabrication of vanadium carbide encapsulated into carbon nanotube (VC@C) core-shell structured composite by thermal treatment with ...

  14. Epitaxial growth of higher transition-temperature VO2 films on AlN/Si

    Directory of Open Access Journals (Sweden)

    Tetiana Slusar

    2016-02-01

    Full Text Available We report the epitaxial growth and the mechanism of a higher temperature insulator-to-metal-transition (IMT of vanadium dioxide (VO2 thin films synthesized on aluminum nitride (AlN/Si (111 substrates by a pulsed-laser-deposition method; the IMT temperature is TIMT ≈ 350 K. X-ray diffractometer and high resolution transmission electron microscope data show that the epitaxial relationship of VO2 and AlN is VO2 (010 ‖ AlN (0001 with VO2 [101] ‖   AlN   [ 2 1 ̄ 1 ̄ 0 ] zone axes, which results in a substrate-induced tensile strain along the in-plane a and c axes of the insulating monoclinic VO2. This strain stabilizes the insulating phase of VO2 and raises TIMT for 10 K higher than TIMT single crystal ≈ 340 K in a bulk VO2 single crystal. Near TIMT, a resistance change of about four orders is observed in a thick film of ∼130 nm. The VO2/AlN/Si heterostructures are promising for the development of integrated IMT-Si technology, including thermal switchers, transistors, and other applications.

  15. Terbium-Doped VO2 Thin Films: Reduced Phase Transition Temperature and Largely Enhanced Luminous Transmittance.

    Science.gov (United States)

    Wang, Ning; Duchamp, Martial; Dunin-Borkowski, Rafal E; Liu, Shiyu; Zeng, XianTing; Cao, Xun; Long, Yi

    2016-01-26

    Vanadium dioxide (VO2) is a well-known thermochromic material with large IR modulating ability, promising for energy-saving smart windows. The main drawbacks of VO2 are its high phase transition temperature (τ(c) = 68°C), low luminous transmission (T(lum)), and weak solar modulating ability (ΔT(sol)). In this paper, the terbium cation (Tb(3+)) doping was first reported to reduce τ(c) and increase T(lum) of VO2 thin films. Compared with pristine VO2, 2 at. % doping level gives both enhanced T(lum) and ΔT(sol) from 45.8% to 54.0% and 7.7% to 8.3%, respectively. The T(lum) increases with continuous Tb(3+) doping and reaches 79.4% at 6 at. % doping level, representing ∼73.4% relative increment compared with pure VO2. This has surpassed the best reported doped VO2 thin films. The enhanced thermochromic properties is meaningful for smart window applications of VO2 materials.

  16. Size-dependent metal-insulator transition in platinum-dispersed silicon dioxide thin film: A candidate for future non-volatile memory

    Science.gov (United States)

    Chen, Albert B. K.

    Non-volatile random access memories (NVRAM) are promising data storage and processing devices. Various NVRAM, such as FeRAM and MRAM, have been studied in the past. But resistance switching random access memory (RRAM) has demonstrated the most potential for replacing flash memory in use today. In this dissertation, a novel RRAM material design that relies upon an electronic transition, rather than a phase change (as in chalcogenide Ovonic RRAM) or a structural change (such in oxide and halide filamentary RRAM), is investigated. Since the design is not limited to a single material but applicable to general combinations of metals and insulators, the goal of this study is to use a model material to delineate the intrinsic features of the electronic metal/insulator transition in random systems and to demonstrate their relevance to reliable memory storage and retrieval. We fabricated amorphous SiO2 thin films embedded with randomly dispersed Pt atoms. Macroscopically, this random material exhibits a percolation transition in electric conductivity similar to the one found in various insulator/metal granular materials. However, at Pt concentrations well below the bulk percolation limit, a distinct insulator to metal transition occurs in the thickness direction as the film thickness falls below electron's "diffusion" distance, which is the tunneling distance at 0K. The thickness-triggered metal- to-insulator transition (MIT) can be similarly triggered by other conditions: (a) a changing Pt concentration (a concentration-triggered MIT), (b) a changing voltage/polarity (voltage-triggered MIT), and (c) an UV irradiation (photon-triggered MIT). The resistance switching characteristics of this random material were further investigated in several device configurations under various test conditions. These include: materials for the top and bottom electrodes, fast pulsing, impedance spectroscopy, static stressing, retention, fatigue and temperature from 10K to 448K. The SiO2-Pt

  17. High Performance Pillared Vanadium Oxide Cathode for Lithium Ion Batteries

    Science.gov (United States)

    2015-04-24

    Performance Pillared Vanadium Oxide Cathode for Lithium Ion Batteries Siu on Tung, Krista L. Hawthorne, Yi Ding, James Mainero, and Levi T. Thompson...Automotive Research Development and Engineering Center, Warren, MI 48387, USA Keywords: nanostructured materials, lithium ion batteries , cathode...2014 to 00-00-2015 4. TITLE AND SUBTITLE High Performance Pillared Vanadium Oxide Cathode for Lithium Ion Batteries 5a. CONTRACT NUMBER 5b. GRANT

  18. Optical detection of carbon dioxide adsorption on epitaxial CuFe1 -xGaxO2 Delafossite film grown by pulse laser deposition

    Science.gov (United States)

    Rojas, S.; Joshi, T.; Wheatley, R. A.; Sarabia, M.; Borisov, P.; Lederman, D.; Cabrera, A. L.

    2016-06-01

    A highly epitaxial delafossite CuFe1 -xGaxO2 film was made with pulse laser deposition in high vacuum. The sample thickness was around 48 nm and it was terminated with CuFeO2. This delafossite sample was exposed to a CO2 atmosphere under controlled conditions and chemisorption of CO2 on the surface was observed. Transmittance and reflectance spectroscopies were recorded for the sample post surface heat treatment held in a vacuum chamber (0.05 Kpa) and after exposure to CO2. Both spectra were recorded over a wavelength range of 350-1100 nm. Chemisorption of CO2 was correlated with an increase in transmittance and decrease in reflectance in the pressure range 0-60 kPa. These observations were confirmed with X-ray photoelectron spectroscopy and thermal programmed desorption data obtained in an independent experiment. The CO2 is bound to the surface forming a carboxylate structure via coordination of a bent CO2- δ molecule to a Cu center.

  19. Electronic Excitations in Vanadium Oxide Phthalocyanine Studied via Resonant Soft X-ray Emission and Resonant Inelastic X-ray Scattering

    Energy Technology Data Exchange (ETDEWEB)

    Zhang,Y.; Wang, S.; Learmonth, T.; Plucinski, L.; Matsuura, A.; Bernardis, S.; ODonnell, C.; Downes, J.; Smith, K.

    2005-01-01

    The electronic structure of the organic semiconductor vanadium oxide phthalocyanine has been studied using resonant inelastic X-ray scattering and X-ray emission spectroscopy. The vanadyl species in the films is shown to be highly localized, and good agreement between the measurements and a density functional calculation is obtained. Both dipole forbidden V 3d to V 3d*, and O 2p to V 3d* charge transfer transitions are observed, and explained in a local molecular orbital model.

  20. Low-temperature solution-processed hydrogen molybdenum and vanadium bronzes for an efficient hole-transport layer in organic electronics.

    Science.gov (United States)

    Xie, Fengxian; Choy, Wallace C H; Wang, Chuandao; Li, Xinchen; Zhang, Shaoqing; Hou, Jianhui

    2013-04-11

    A simple one-step method is reported to synthesize low-temperature solution-processed transition metal oxides (TMOs) of molybdenum oxide and vanadium oxide with oxygen vacancies for a good hole-transport layer (HTL). The oxygen vacancy plays an essential role for TMOs when they are employed as HTLs: TMO films with excess oxygen are highly undesirable for their application in organic electronics. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Tackling capacity fading in vanadium flow batteries with amphoteric membranes

    Science.gov (United States)

    Oldenburg, Fabio J.; Schmidt, Thomas J.; Gubler, Lorenz

    2017-11-01

    Capacity fading and poor electrolyte utilization caused by electrolyte imbalance effects are major drawbacks for the commercialization of vanadium flow batteries (VFB). The influence of membrane type (cationic, anionic, amphoteric) on these effects is studied by determining the excess and net flux of each vanadium ion in an operating VFB assembled with a cation exchange membrane (CEM), Nafion® NR212, an anion exchange membrane (AEM), Fumatech FAP-450, and an amphoteric ion exchange membrane (AIEM) synthesized in-house. It is shown that the net vanadium flux, accompanied by water transport, is directed towards the positive side for the CEM and towards the negative side for the AEM. The content of cation and anion exchange groups in the AIEM is adjusted via radiation grafting to balance the vanadium flux between the two electrolyte sides. With the AIEM the net vanadium flux is significantly reduced and capacity fading due to electrolyte imbalances can be largely eliminated. The membrane's influence on electrolyte imbalance effects is characterized and quantified in one single charge-discharge cycle by analyzing the content of the four different vanadium species in the two electrolytes. The experimental data recorded herewith conclusively explains the electrolyte composition after 80 cycles.

  2. Comparison of Microstructural and Tribological Effects of Low Vanadium-Low Titanium Additions to a Gray Cast Iron

    Science.gov (United States)

    Hassani, A.; Habibolahzadeh, A.; Sadeghinejad, S.

    2013-01-01

    Effects of low amounts of vanadium and titanium additions on the microstructure, tribological properties of a gray cast iron were studied and an overall comparison was made between these two alloys. Pin-on-disk tests were performed on the specimens at three different loads and two sliding speeds. SEM was utilized to study the worn surfaces and the mechanisms under which wear occurred. Local chemical analyses were conducted on the specific spots in the wear tracks by EDX. Wear mechanisms were determined and the quantitative amounts of the elements in the tribochemical films formed on the wear tracks were evaluated. Both vanadium-treated and untreated samples exhibited oxidative wear mechanism under mild regimes and adhesive wear mechanism under severe wear regime. The wear rate was reduced up to 85% when the vanadium-treated sample was tested; it showed the best wear resistance. The alloy having titanium, however, showed the least wear resistance compared to the others. It could be due to the formation of type-D graphite in its microstructure.

  3. Localization of Vanabins, Vanadium-Binding Proteins, in the Blood Cells of the Vanadium-Rich Ascidian, Ascidia sydneiensis samea(Physiology)

    OpenAIRE

    Nobuo, Yamaguchi; Yuko, Amakawa; Hiroshi, Yamada; Tatsuya, Ueki; Hitoshi, Michibata; Marine Biological Laboratory, Graduate School of Science, Hiroshima University; Department of Neuroscience, Graduate School of Medicine and Dentistry, Okayama University; Molecular Physiology Laboratory, Department of Biological Science, Graduate School of Science, Hiroshima University

    2006-01-01

    Some species of the family Ascidiidae accumulate vanadium in concentrations in excess of 350mM, which is about 10^7-fold higher than the concentration of vanadium in seawater. In these species, signet ring cells with a single large vacuole in which vanadium ions are contained function as vanadium-accumulating cells. These have been termed vanadocytes. We recently isolated five vanadium-binding proteins, which we named Vanabinl, Vanabin2, Vanabin3, Vanabin4, and VanabinP, from vanadocytes of t...

  4. Comparison of Ultrasound-Assisted and Regular Leaching of Vanadium and Chromium from Roasted High Chromium Vanadium Slag

    Science.gov (United States)

    Wen, Jing; Jiang, Tao; Gao, Huiyang; Liu, Yajing; Zheng, Xiaole; Xue, Xiangxin

    2018-02-01

    Ultrasound-assisted leaching (UAL) was used for vanadium and chromium leaching from roasted material obtained by the calcification roasting of high-chromium-vanadium slag. UAL was compared with regular leaching. The effect of the leaching time and temperature, acid concentration, and liquid-solid ratio on the vanadium and chromium leaching behaviors was investigated. The UAL mechanism was determined from particle-size-distribution and microstructure analyses. UAL decreased the reaction time and leaching temperature significantly. Furthermore, 96.67% vanadium and less than 1% chromium were leached at 60°C for 60 min with 20% H2SO4 at a liquid-solid ratio of 8, which was higher than the maximum vanadium leaching rate of 90.89% obtained using regular leaching at 80°C for 120 min. Ultrasonic waves broke and dispersed the solid sample because of ultrasonic cavitation, which increased the contact area of the roasted sample and the leaching medium, the solid-liquid mass transfer, and the vanadium leaching rate.

  5. Open nanoporous morphologies from polymeric blends by carbon dioxide foaming

    NARCIS (Netherlands)

    Krause, B.; Diekmann, K.; van der Vegt, N.F.A.; Wessling, Matthias

    2002-01-01

    We report the formation of open nanoporous polymer films composed of homogeneous polysulfone/polyimide blends. Porosity is introduced by expansion of carbon dioxide-saturated films at elevated temperatures. To interpret details of the porous morphologies in terms of the experimental conditions

  6. X-ray absorption of Azotobacter vinelandii vanadium nitrogenase

    Energy Technology Data Exchange (ETDEWEB)

    George, G.N.; Coyle, C.L.; Hales, B.J.; Cramer, S.P.

    1988-06-08

    Evidence for the existence of a vanadium-containing nitrogenase has existed for more than half a century, but progress in understanding this enzyme has only come recently. In 1980, Bishop and co-workers proposed that an alternative nitrogen-fixing enzyme exists in Azotobacter vinelandii and subsequently proposed that vanadium was involved. In 1986, Robson et al. demonstrated clearly that the alternate nitrogenase from Azotobacter chroococcum, Acl*, contained vanadium instead of molybdenum. Hales et al. have shown the vanadium is also found in the Azotobacter vinelandii alternative component I, Avl'. The molybdenum and vanadium nitrogenase proteins are similar in many respects. Like the molybdenum enzyme, both Acl* and Avl' exhibit an EPR spectrum characteristic of a species with an S = 3/2 ground state; Avl' also contains the so-called P-clusters. Additionally Acl* has recently been shown to possess an N-methylformamide soluble cofactor, FeVco, analogous to the well-known iron-molybdenum cofactor FeMoco. Arber et al. have reported X-ray absorption spectra for the Acl* enzyme and interpreted the EXAFS as evidence for a V-Fe-S cluster. The local vanadium structure is proposed to resemble a recently synthesized cubane-like VFe/sub 3/S/sub 4/ cluster, and analogies are drawn with the EXAFS-derived structure reported for the molybdenum nitrogenases. The authors report herein an X-ray absorption spectroscopic study of A. vinelandii vanadium nitrogenase, Avl', which supports and extends the work of Arber et al.

  7. Vanadium-Catalyzed Enantioselective Desymmetrization of meso-Secondary Allylic Alcohols and Homoallylic Alcohols

    OpenAIRE

    Li, Zhi; Zhang, Wei; Hisashi Yamamoto, H.

    2008-01-01

    Vanadium-catalyzed epoxidation has extended substrate scope. In addition to various bis-allylic alcohols, bis-homoallylic alcohols can also be desymmetrized using our Vanadium-Bis-hydroxamic acid complexes.

  8. Complexation of vanadium with amidoxime and carboxyl groups. Uncovering the competitive role of vanadium in uranium extraction from seawater

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Cong-Zhi; Wu, Qun-Yan; Lan, Jian-Hui; Shi, Wei-Qun [Chinese Academy of Sciences, Beijing (China). Inst. of High Energy Physics; Chai, Zhi-Fang [Chinese Academy of Sciences, Beijing (China). Inst. of High Energy Physics; Soochow Univ., Suzhou (China). School of Radiological and Interdisciplinary Sciences (RAD-X); Wu, Guo-Zhong [Chinese Academy of Sciences, Shanghai (China). Shanghai Inst. of Applied Physics

    2017-09-01

    At present, amidoxime-based adsorbents are considered to be the most promising materials for extraction of uranium from seawater. However, the high concentrations of transition metals especially vanadium strongly compete with uranium in the sequestration process, which is extremely limited the commercial use of amidoxime-based adsorbents. In this work, the coordination modes, bonding nature, and stabilities of possible vanadium(IV) (VO{sup 2+}) and (V) (VO{sub 2}{sup +}, VO{sup 3+}, V{sup 5+}) complexes with amidoximate (AO{sup -}), carboxyl (Ac{sup -}), glutarimidedioximate (HA{sup -}) and deprotonated glutarimidedioximate (A{sup 2-}) on single and double alkyl chains (R=C{sub 13}H{sub 26}) are systematically explored by quantum chemical calculations. Different from the uranyl (UO{sub 2}{sup 2+}) complexes, the AO{sup -} groups of the vanadium(IV) and (V) complexes prefer to coordinate as monodentate and chelate ligands, while few species with AO{sup -} groups in η{sup 2}-binding mode have been observed in the vanadium complexes. Besides, the vanadium complexes are predicted to have obvious covalent metal-ligand bonds. According to thermodynamic stability analysis, all the vanadium complexes with AO{sup -}, Ac{sup -}, HA{sup -} and A{sup 2-} ligands on double alkyl chains are found to be more stable than corresponding complexes with ligands on a single chain. The synergistic effect of the amidoxime and carboxyl groups can be observed in most of VO{sub 2}{sup +} and VO{sup 3+} complexes with mixed ligands (AO{sup -}/Ac{sup -}). The vanadium(IV) and (V) complexes are more stable than the corresponding uranyl complexes, and the adsorption capability of the amidoxime-based adsorbents toward vanadium(V) ions decrease in the order of VO{sub 2}{sup +}>VO{sup 3+}> V{sup 5+}. The dioxovanadium cation VO{sub 2}{sup +} is predicted to form multinuclear vanadium complex in the sequestration process, possibly resulting in higher stable VO{sub 2}{sup +} complexes. Therefore

  9. Dual-Band Modulation of Visible and Near-Infrared Light Transmittance in an All-Solution-Processed Hybrid Micro-Nano Composite Film.

    Science.gov (United States)

    Liang, Xiao; Chen, Mei; Guo, Shumeng; Zhang, Lanying; Li, Fasheng; Yang, Huai

    2017-11-22

    Smart windows with controllable visible and near-infrared light transmittance can significantly improve the building's energy efficiency and inhabitant comfort. However, most of the current smart window technology cannot achieve the target of ideal solar control. Herein, we present a novel all-solution-processed hybrid micronano composite smart material that have four optical states to separately modulate the visible and NIR light transmittance through voltage and temperature, respectively. This dual-band optical modulation was achieved by constructing a phase-separated polymer framework, which contains the microsized liquid crystals domains with a negative dielectric constant and tungsten-doped vanadium dioxide (W-VO2) nanocrystals (NCs). The film with 2.5 wt % W-VO2 NCs exhibits transparency at normal condition, and the passage of visible light can be reversibly and actively regulated between 60.8% and 1.3% by external applied voltage. Also, the transmittance of NIR light can be reversibly and passively modulated between 59.4% and 41.2% by temperature. Besides, the film also features easy all-solution processability, fast electro-optical (E-O) response time, high mechanical strength, and long-term stability. The as-prepared film provides new opportunities for next-generation smart window technology, and the proposed strategy is conductive to engineering novel hybrid inorganic-organic functional matters.

  10. Enhanced Thermochromic Properties and Solar-Heat Shielding Ability of W(x)V(1-x)O2 Thin Films with Ag Nanowires Capping Layers.

    Science.gov (United States)

    Zhao, Li Li; Miao, Lei; Liu, Cheng Yan; Wang, Hai Long; Tanemura, Sakae; Sun, Li Xian; Gao, Xiang; Zhou, Jian Hua

    2015-11-01

    Considerable efforts have been made to shift the phase transition temperature of metal-doped vanadium dioxide (VO2) films nearer the ambient temperature while maintain the excellent thermochromic properties simultaneously. Here, we describe a facile and economic solution-based method to fabricate W-doped VO2 (V(1-x)W(x)O2) thin films with excellent thermochromic properties for the application of smart windows. The substitutional doping of tungsten atoms notably reduces the phase transition temperature to the ambient temperature and retains the excellent thermochromic property. Furthermore, Ag nanowires (NWs) are employed as capping layers to effectively decrease the thermal emissivity from 0.833 to 0.603, while the original near infrared region (NIR) modulation ability is not severely affected. Besides, the Ag NWs layers further depress the phase transition temperature as well as the hysteresis loop width, which is important to the fenestration application. These solution-grown Ag NWs/V(1-x)W(x)O2 thin films exhibit excellent solar modulation ability, narrowed hysteresis loop width as well as low thermal emissivity, which provide a promising perspective into the practical application of VO2-based smart windows.

  11. Sputtered Thin Film Research

    Science.gov (United States)

    1974-11-01

    and Idonllly hy block numbor) Reactive Sputtering, Heteroepitaxy, Thin Films Single Crystal Zinc Oxide, Titanium Dioxide, Aluminum Nitride, Gallium...Conditions were determined for the deposition of amorphous neodymium ultra- phosphate films. This material holds the potential for the fabrication...reaching the substrate at any time during sputtering. A 17.2 cm diameter quartz plate was covered with a thin coating of zinc sulflde and placed on

  12. Vanadium uptake by biomass of Coprinus comatus and their effect on hyperglycemic mice.

    Science.gov (United States)

    Han, Chunchao; Cui, Bo; Wang, Yingzi

    2008-07-01

    The Vanadium uptake by Coprinus comatus and their co-effect on hyperglycemic mice were studied. By fermentation and AAS analysis, the optimal concentration of vanadium in medium was 0.4%, and the content of vanadium accumulated in the mycelia was 3,528.0 microg/g. At the concentration of 0.4%, the vanadium-associated toxicity was reduced, and its anti-diabetic effects were maintained.

  13. A Novel Eco-Friendly Vanadium Precipitation Method by Hydrothermal Hydrogen Reduction Technology

    OpenAIRE

    Guobin Zhang; Yimin Zhang; Shenxu Bao; Jing Huang; Liuhong Zhang

    2017-01-01

    In view of the serious pollution problems caused by the traditional vanadium precipitation process, the eco-friendly technology of hydrothermal hydrogen reduction was first applied to precipitate phase pure vanadium sesquioxide (V2O3) products from stripped pentavalent vanadium (V (V)) solution extracted from vanadium-bearing shale. Thermodynamic analysis demonstrate the method of hydrothermal hydrogen reduction is feasible for precipitating V2O3 from V (V) solution at a suitable pH range, an...

  14. A new sensitive electrochemical method for the determination of vanadium(IV) and vanadium(V) in Benfield sample.

    Science.gov (United States)

    Qureshi, Munawar Saeed; Mohd Yusoff, Abdull Rahim bin; Shah, Afzal; Nafady, Ayman; Sirajuddin

    2015-01-01

    Vanadium(IV) and vanadium(V) can be determined by using differential pulse cathodic stripping voltammetry technique (DPCSV). Cupferron (ammonium N-nitrosophenylhydroxylamine) was used as ligand to form complex compounds with vanadium ions in Britton-Robinson buffer (BRB) solution. At concentration lower than 1.0×10(-6) M, both V(IV) and V(V) cupferron complexes showed a single cathodic peak at -0.576 V in BRB of pH 4; thus V(IV) and V(V) ions cannot be differentiated at low concentration. However, the ionic species of vanadium can be differentiated at high concentration in the presence of cupferron. Parameters including pH of BRB solution, initial potential and accumulation potential were optimized. Under the optimized parameters, the limit of detection (LOD) was 0.09 nM, and the peak current was linear in the concentration range 0.01-0.9 µM total vanadium ions. The determination of V(IV) and V(V) ions was carried out at higher concentration in the sample using calibration plot method. At higher concentration range of 10-60 µM V(IV) and V(V) ions were determined with LOD of 1.2 and 1.1 µM, respectively. The developed method was successfully applied to 10,00,000 fold diluted Benfield sample and 0.6227 M total vanadium ions were determined. The determination of V(IV) and V(V) ions were also successfully carried out in artificial sample as well as Benfield sample (dilution factor, 10,000). The concentration of V(IV) and V(V) ions was 22.52 µM and 38.91 µM, respectively, giving total vanadium concentration of 0.6143 M in Benfield sample. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Gastroprotective effect of vanadium in rats - the roles of gastric acid ...

    African Journals Online (AJOL)

    Vanadium (various forms) has been proven to be beneficial in the treatment of certain diseases, especially diabetes. Reports have it that vanadium may protect the stomach from gastric ulcerogens such as ethanol and acid. This study was designed to investigate the probable mechanism Vanadium exerts its' ...

  16. Method for Vanadium Speciation in Aqueous Samples by HPLC-ICP ...

    African Journals Online (AJOL)

    Method for Vanadium Speciation in Aqueous Samples by HPLC-ICP-OES. M Hu, PP Coetzee. Abstract. A method for vanadium speciation is proposed. The method uses a low concentration eluent, 10 mmol L–1 EDTA and 14 mmol L–1 sodium carbonate, for the ion chromatographic separation of vanadium species at a ...

  17. Method for Vanadium Speciation in Aqueous Samples by HPLC-ICP ...

    African Journals Online (AJOL)

    NJD

    methods can only measure the total concentration of vanadium, or one of the two vanadium species, particularly V(V).4–6 Some two-step methods for the determination of the two vanadium species7–10 have been proposed by several groups. These methods normally measure one of the two species in one step, and in the.

  18. Chemistry, spectroscopy and the role of supported vanadium oxides in heterogeneous catalysis

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Keller, D.E.

    2003-01-01

    Supported vanadium oxide catalysts are active in a wide range of applications. In this review, an overview is given of the current knowledge available about vanadium oxide-based catalysts. The review starts with the importance of vanadium in heterogeneous catalysis, a discussion of the molecular

  19. Vanadium Extraction from Refractory Stone Coal Using Novel Composite Additive

    Science.gov (United States)

    Cai, Z. L.; Zhang, Y. M.; Liu, T.; Huang, J.

    2015-11-01

    Based on the novel composite additive BaCO3/CaO for the vanadium extraction from the refractory stone coal, the vanadium leaching effect has been investigated and many technical conditions have also been optimized. The results indicated that an optimum vanadium leaching efficiency of 81.07% can be obtained under the conditions that the mass ratio of BaCO3 to CaO was 1:9 with the total proportion of the raw ore was 5 wt.%, the roasting temperature was 850°C, the roasting time was 2 h, the sulfuric acid concentration was 15% (v/v), the leaching temperature was 95°C, the liquid-to-solid ratio was 4 mL/g, and the leaching time was 3 h. Meanwhile, the vanadium leaching mechanisms demonstrated that the composite additive BaCO3/CaO can destroy the lattice structure of muscovite and phlogopite with the production of BaSi4O9 and Ca2Al2SiO7 during the roasting process, which can therefore facilitate the release and extraction of vanadium.

  20. Imaging of Vanadium in Microfossils: A New Potential Biosignature

    Science.gov (United States)

    Marshall, Craig P.; Marshall, Alison Olcott; Aitken, Jade B.; Lai, Barry; Vogt, Stefan; Breuer, Pierre; Steemans, Philippe; Lay, Peter A.

    2017-11-01

    The inability to unambiguously distinguish the biogenicity of microfossil-like structures in the ancient rock record is a fundamental predicament facing Archean paleobiologists and astrobiologists. Therefore, novel methods for discriminating biological from nonbiological chemistries of microfossil-like structures are of the utmost importance in the search for evidence of early life on Earth. This, too, is important for the search for life on Mars by in situ analyses via rovers or sample return missions for future analysis here on Earth. Here, we report the application of synchrotron X-ray fluorescence imaging of vanadium, within thermally altered organic-walled microfossils of bona fide biological origin. From our data, we demonstrate that vanadium is present within microfossils of undisputable biological origin. It is well known in the organic geochemistry literature that elements such as vanadium are enriched and contained within crude oils, asphalts, and black shales that have been formed by diagenesis of biological organic material. It has been demonstrated that the origin of vanadium is due to the diagenetic alteration of precursor chlorophyll and heme porphyrin pigment compounds from living organisms. We propose that, taken together, microfossil-like morphology, carbonaceous composition, and the presence of vanadium could be used in tandem as a biosignature to ascertain the biogenicity of putative microfossil-like structures.

  1. Membrane development for vanadium redox flow batteries.

    Science.gov (United States)

    Schwenzer, Birgit; Zhang, Jianlu; Kim, Soowhan; Li, Liyu; Liu, Jun; Yang, Zhenguo

    2011-10-17

    Large-scale energy storage has become the main bottleneck for increasing the percentage of renewable energy in our electricity grids. Redox flow batteries are considered to be among the best options for electricity storage in the megawatt range and large demonstration systems have already been installed. Although the full technological potential of these systems has not been reached yet, currently the main problem hindering more widespread commercialization is the high cost of redox flow batteries. Nafion, as the preferred membrane material, is responsible for about 11% of the overall cost of a 1 MW/8 MWh system. Therefore, in recent years two main membrane related research threads have emerged: 1) chemical and physical modification of Nafion membranes to optimize their properties with regard to vanadium redox flow battery (VRFB) application; and 2) replacement of the Nafion membranes with different, less expensive materials. This review summarizes the underlying basic scientific issues associated with membrane use in VRFBs and presents an overview of membrane-related research approaches aimed at improving the efficiency of VRFBs and making the technology cost-competitive. Promising research strategies and materials are identified and suggestions are provided on how materials issues could be overcome.

  2. Corrosion resistant surface for vanadium nitride and hafnium nitride layers as function of grain size

    Science.gov (United States)

    Escobar, C. A.; Caicedo, J. C.; Aperador, W.

    2014-01-01

    In this research it was studied vanadium nitride (VN) and hafnium nitride (HfN) film, which were deposited onto silicon (Si (100)) and AISI 4140 steel substrates via r.f. magnetron sputtering technique in Ar/N2 atmosphere with purity at 99.99% for both V and Hf metallic targets. Both films were approximately 1.2±0.1 μm thick. The crystallography structures that were evaluated via X-ray diffraction analysis (XRD) showed preferential orientations in the Bragg planes VN (200) and HfN (111). The chemical compositions for both films were characterized by EDX. Atomic Force Microscopy (AFM) was used to study the morphology; the results reveal grain sizes of 78±2 nm for VN and 58±2 nm for HfN and roughness values of 4.2±0.1 nm for VN and 1.5±0.1 nm for HfN films. The electrochemical performance in VN and HfN films deposited onto steel 4140 were studied by Tafel polarization curves and impedance spectroscopy methods (EIS) under contact with sodium chloride at 3.5 wt% solution, therefore, it was found that the corrosion rate decreased about 95% in VN and 99% for HfN films in relation to uncoated 4140 steel, thus demonstrating, the protecting effect of VN and HfN films under a corrosive environment as function of morphological characteristics (grain size). VN(grain size)=78±2.0 nm, VN(roughness)=4.2±0.1 nm, VN(corrosion rate)=40.87 μmy. HfN(grain size)=58±2.0 nm, HfN(roughness)=1.5±0.1 nm, HfN(corrosion rate)=0.205 μmy. It was possible to analyze that films with larger grain size, can be observed smaller grain boundary thus generating a higher corrosion rate, therefore, in this work it was found that the HfN layer has better corrosion resistance (low corrosion rate) in relation to VN film which presents a larger grain size, indicating that the low grain boundary in (VN films) does not restrict movement of the Cl- ion and in this way the corrosion rate increases dramatically.

  3. Theoretical study of vanadium oxides interaction with Y-zeolite.

    Science.gov (United States)

    Arroyo, M; Sansores, L E; Salcedo, R; Montoya, J A

    2008-12-01

    A current problem about oils and feedstock in fluid catalytic cracking (FCC) is the continuous cumulative deposition of metal contaminants on the catalyst, resulting in important modifications of its properties. Vanadium plays a detrimental role on the catalyst components because enhances the destruction of the Y-zeolite structure during regeneration stage when it is exposed by steam and oxygen at high temperatures. Knowledge of the mechanism interaction of vanadium with the catalyst is important to improve FCC performance. Quantum Molecular Dynamics calculations were done introducing the VO, V2O3, VO2 or V2O5 molecules at the center of a Y-zeolite ring simulating regeneration conditions. The results indicate that the principal reaction is carried out among the zeolite and the vanadium atoms of molecules. This happens, when interaction is presented, since the loss of a hydrogen atom of the active place causes high degree of oxygen reactivity.

  4. Direct Acid Leaching of Vanadium from Stone Coal

    Science.gov (United States)

    Zhang, Bo; Gao, Zhaoguo; Liu, Hongzhao; Wang, Wei; Cao, Yaohua

    2017-09-01

    This paper focused on optimizing the process conditions of direct acid leaching process to enhance the leaching efficiency of leaching vanadium from the stone coal. Orthogonal experiments and single factor experiments were conducted to investigate the effect of the influential factors of direct acid leaching on vanadium leaching ratio. The results showed that the vanadium leaching ratio reached the maximum value of 89.22 % under the optimal process conditions of CaF2 dosage 5 mass%, H2SO4 dosage 40 mass%, leaching temperature 95 °C and leaching time 10 h. Furthermore, the reaction mechanisms of the main influencing factors were analyzed. Finally, the two-stage counter-current leaching process was adopted to decrease the consumption of sulfuric acid and neutralizer, and the results indicated that the consumption of sulfuric acid decreased 12.50 % as well as neutralizer decreased 35.80 %.

  5. Vanadium-modified molecular sieves: preparation, characterization and catalysis

    Directory of Open Access Journals (Sweden)

    Ângela A. Teixeira-Neto

    2009-01-01

    Full Text Available Vanadium-containing molecular sieves are redox catalysts and are good candidates as substitutes for oxide-supported V2O5 in a number of reactions. These materials have the advantage of presenting better dispersion of vanadium species, as well as shape-selective properties and controllable acidities. They may be prepared by one-pot synthesis or by post-synthesis methods and a number of techniques such as diffuse reflectance UV-visible spectroscopy, 51V nuclear magnetic resonance and electron paramagnetic resonance, to name but a few, have been used to characterize these materials. In this review, methods of preparation of vanadium-modified molecular sieves, their characterization and applications in catalysis are discussed.

  6. The determination of vanadium in brines by atomic absorption spectroscopy

    Science.gov (United States)

    Crump-Wiesner, Hans J.; Feltz, H.R.; Purdy, W.C.

    1971-01-01

    A standard addition method is described for the determination of vanadium in brines by atomic absorption spectroscopy with a nitrous oxide-acetylene flame. Sample pH is adjusted to 1.0 with concentrated hydrochloric acid and the vanadium is directly extracted with 5% cupferron in methyl isobutyl ketone (MIBK). The ketone layer is then aspirated into the flame and the recorded absorption values are plotted as a function of the concentration of the added metal. As little as 2.5 ??g l-1 of vanadium can be detected under the conditions of the procedure. Tungsten and tin interfere when present in excess of 5 and 10 ??g ml-1, respectively. The concentrations of the two interfering ions normally found in brines are well below interference levels. ?? 1971.

  7. Vanadium sesquioxide (V2O3)-based semiconducting temperature sensitive resistors for uncooled microbolometers

    Science.gov (United States)

    Abdel-Rahman, Mohamed; Alduraibi, Mohammad; Zia, Muhammad Fakhar; Bahidra, Esme; Alasaad, Amr

    2017-05-01

    This paper reports on a semiconducting resistor material based on vanadium sesquioxide (V2O3) with electrical resistivity and temperature coefficient of resistance (TCR) appropriate for microbolometer applications. In this work, V2O3-based semiconducting resistor material was synthesized and electrically characterized. The developed material was prepared by annealing, in O2 and N2 atmospheres, a cascaded multilayer structure composed of V2O3 (10 nm) and V (5 nm) room temperature sputter coated thin films. The developed 55 nm thin film microbolometer resistor material possessed high temperature sensitivity from 20∘C to 45∘C with a TCR of -3.68%/∘C and room temperature resistivity of 0.57 Ω ṡcm for O2 annealed samples and a TCR of -3.72%/∘C and room temperature resistivity of 0.72 Ω ṡcm for N2 annealed samples. The surface morphologies of the synthesized thin films were studied using atomic force microscopy showing no significant post-growth annealing effect on the smoothness of the samples surfaces.

  8. Kinetic enhancement via passive deposition of carbon-based nanomaterials in vanadium redox flow batteries

    Science.gov (United States)

    Aaron, Doug; Yeom, Sinchul; Kihm, Kenneth D.; Ashraf Gandomi, Yasser; Ertugrul, Tugrul; Mench, Matthew M.

    2017-10-01

    Addition of carbon-based nanomaterials to operating flow batteries accomplishes vanadium redox flow battery performance improvement. Initial efforts focus on addition of both pristine graphene and vacuum-filtered reduced graphene oxide (rGO) film on carbon paper supporting electrodes. While the former is unable to withstand convective flow through the porous electrode, the latter shows measurable kinetic improvement, particularly when laid on the polymer electrolyte membrane (PEM) side of the electrode; in contrast to the kinetic performance gain, a deleterious impact on mass transport is observed. Based on this tradeoff, further improvement is realized using perforated rGO films placed on the PEM side of the electrodes. Poor mass transport in the dense rGO film prompts identification of a more uniform, passive deposition method. A suspension of rGO flakes or Vulcan carbon black (XC-72R), both boasting two orders-of-magnitude greater specific surface area than that of common carbon electrodes, is added to the electrolyte reservoirs and allowed to passively deposit on the carbon paper or carbon felt supporting electrodes. For common carbon felt electrodes, addition of rGO flakes or XC-72R enables a tripling of current density at the same 80% voltage efficiency.

  9. Vanadium Doped Tungsten Oxide Material - Electrical Physical and Sensing Properties

    Directory of Open Access Journals (Sweden)

    Shishkin N. Y.

    2008-05-01

    Full Text Available The electrical physical and sensing (to VOCs and inorganic gases properties of vanadium doped tungsten oxide in the regions of phase transition temperature were investigated. Vanadium oxide (II dimerization was observed in the doped material, corresponding to new phase transition. The extreme sensitivity and selectivity to chemically active gases and vapors in small concentrations: CO, NOx, NH3 acetone, ethanol near phase transitions temperature was found. Sensor elements were manufactured for the quantitative detection (close to 1 ppm of alcohol and ammonia.

  10. Adsorption kinetics and isotherm of vanadium with melamine.

    Science.gov (United States)

    Peng, Hao; Liu, Zuohua; Tao, Changyuan

    2017-05-01

    Melamine, possessing three free amino groups and three aromatic nitrogen atoms in its molecule, has great potential as an adsorbent for metal ions. We investigated three impact factors of the adsorption process: the initial pH of the vanadium solution, contact time and reaction temperature. The adsorption kinetics could be accurately described by the pseudo-second-order kinetic model. Langmuir and Freundlich models fitted well with the experimental equilibrium data, and the maximal adsorption capacity was found to be 1,428.57 mg vanadium/g melamine, and the Freundlich model showed the adsorption is privilege type.

  11. Research and development on vanadium alloys for fusion applications

    Energy Technology Data Exchange (ETDEWEB)

    Zinkle, S.J.; Rowcliffe, A.F. [Oak Ridge National Lab., TN (United States); Matsui, H.; Abe, K. [Tohoku Univ. (Japan); Smith, D.L. [Argonne National Lab., IL (United States); Osch, E. van [NERF, Petten (Netherlands); Kazakov, V.A. [RIAR, Dimitrovgrad (Russian Federation)

    1998-03-01

    The current status of research and development on unirradiated and irradiated V-Cr-Ti alloys intended for fusion reactor structural applications is reviewed, with particular emphasis on the flow and fracture behavior of neutron-irradiated vanadium alloys. Recent progress on fabrication, joining, oxidation behavior, and the development of insulator coatings is also summarized. Fabrication of large (>500 kg) heats of V-4Cr-4Ti with properties similar to previous small laboratory heats has now been demonstrated. Impressive advances in the joining of thick sections of vanadium alloys using GTA and electron beam welds have been achieved in the past two years, although further improvements are still needed.

  12. Absorption of hydrogen in vanadium, enhanced by ion bombardment; Ionenbeschussunterstuetzte Absorption des Wasserstoffs in Vanadium

    Energy Technology Data Exchange (ETDEWEB)

    Paulus, H.; Lammers, M. [Inst. fuer Technologie- und Wissenstransfer, Soest (Germany); Mueller, K.H. [Inst. fuer Technologie- und Wissenstransfer, Soest (Germany)]|[Paderborn Univ. (Gesamthochschule), Soest (Germany). Fachbereich 16 - Elektrische Energietechnik; Kiss, G.; Kemeny, Z. [Technical Univ. Budapest (Hungary)

    1998-12-31

    Prior to hydrogen implantation into vanadium, the vanadium specimen usually is exposed to an activation process and is then heated at 1 atm hydrogen to temperatures between 500 and 600 C, subsequently cooled down in several steps. Within this temperature range, hydrogen solubility increases with declining temperature. A decisive factor determining hydrogen absorption is the fact that at temperatures above 250 C, oxygen desorbs from the material surface and thus no longer inhibits hydrogen absorption. Therefore a different approach was chosen for the experiments reported: Hydrogen absorption under UHV conditions at room temperature. After the usual activation process, the vanadium surface was cleaned by 5 keV Ar{sup +} ion bombardment. Thus oxygen absorption at the specimen surface (and new reactions with oxygen from the remaining gas) could be avoided, or removed. By means of thermal desorption mass spectrometry (TDMS), hydrogen absorption as a function of argon ion dose was analysed. TDMS measurements performed for specimens treated by ion bombardment prior to H{sup 2} exposure showed two H{sup 2} desorption peaks, in contrast to the profiles measured with specimens not exposed to ion bombardment. It is assumed that the ion bombardment disturbs the crystal structure so that further sites for hydrogen absorption are produced. (orig./CB) [Deutsch] Bei der Beladung von Vandium mit Wasserstoff wird ueblicherweise die Probe nach einer Aktivierungsprozedur bei 1 atm Wasserstoff auf Temperaturen im Bereich von 500 bis 600 C hochgeheizt und danach schrittweise abgekuehlt. In diesem Temperaturbereich nimmt die Wasserstoffloeslichkeit mit abnehmender Temperatur zu. Entscheidend fuer die Beladung ist aber auch die Tatsache, dass bei Temperaturen groesser 250 C Sauerstoff von der Oberflaeche desorbiert und dadurch die Absorption von Wasserstoff nicht mehr blockieren kann. Im Rahmen der hier beschriebenen Untersuchungen sollte die Wasserstoffbeladung unter UHV-Bedingungen bei

  13. Optimal Location of Vanadium in Muscovite and Its Geometrical and Electronic Properties by DFT Calculation

    Directory of Open Access Journals (Sweden)

    Qiushi Zheng

    2017-02-01

    Full Text Available Vanadium-bearing muscovite is the most valuable component of stone coal, which is a unique source of vanadium manufacture in China. Numbers of experimental studies have been carried out to destroy the carrier muscovite’s structure for efficient extraction of vanadium. Hence, the vanadium location is necessary for exploring the essence of vanadium extraction. Although most infer that vanadium may substitute for trivalent aluminium (Al as the isomorphism in muscovite for the similar atomic radius, there is not enough experimental evidence and theoretical supports to accurately locate the vanadium site in muscovite. In this study, the muscovite model and optimal location of vanadium were calculated by density functional theory (DFT. We find that the vanadium prefers to substitute for the hexa-coordinated aluminum of muscovite for less deformation and lower substitution energy. Furthermore, the local geometry and relative electronic properties were calculated in detail. The basal theoretical research of muscovite contained with vanadium are reported for the first time. It will make a further influence on the technology development of vanadium extraction from stone coal.

  14. Vanadium Recovery from Oil Fly Ash by Carbon Removal and Roast-Leach Process

    Science.gov (United States)

    Jung, Myungwon; Mishra, Brajendra

    2017-11-01

    This research mainly focuses on the recovery of vanadium from oil fly ash by carbon removal and the roast-leach process. The oil fly ash contained about 85% unburned carbon and 2.2% vanadium by weight. A vanadium-enriched product was obtained after carbon removal, and the vanadium content of this product was 19% by weight. Next, the vanadium-enriched product was roasted with sodium carbonate to convert vanadium oxides to water-soluble sodium metavanadate. The roasted sample was leached with water at 60°C, and the extraction percentage of vanadium was about 92% by weight. Several analytical techniques, such as inductively coupled plasma atomic emission spectroscopy (ICP-AES), x-ray fluorescence (XRF), and thermogravimetric and differential thermal analysis (TG-DTA), were utilized for sample analyses. Thermodynamic modeling was also conducted with HSC chemistry software to explain the experimental results.

  15. Comparison of vanadium-rich activity of three species fungi of basidiomycetes.

    Science.gov (United States)

    Han, Chunchao; Cui, Bo; Qu, Jingran

    2009-03-01

    A comparison of vanadium-rich activity of three species fungi of Basidiomycetes, Ganoderma lucidum, Coprinus comatus, and Grifola frondosa, was studied. By fermentation and atomic absorption spectroscopy analysis, the biomass of G. lucidum and G. frondosa declined rapidly when the concentration of vanadium exceeded 0.3% but the biomass of C. comatus did not decline rapidly until the concentration of vanadium exceeded 0.4% and the content of vanadium accumulated in the mycelia was 3529.3 microg/g. After the mice were administered (intragastrically) with vanadium-rich C. comatus, the blood glucose of alloxan-induced hyperglycemic mice was decreased (p comatus to absorb vanadium and chose 0.4% as the optimal concentration of vanadium for the pharmacological works.

  16. THE INFLUENCE OF NIOBIUM ON THE ACIDITY AND STRUCTURE OF GAMMA-ALUMINA-SUPPORTED VANADIUM OXIDES

    Directory of Open Access Journals (Sweden)

    Sathler M.N.B.

    1998-01-01

    Full Text Available Gamma-alumina-supported niobium oxide was used as a support for vanadium oxides. The influence of the addition of niobium oxide was studied by looking for changes in the structure and acid-base character of superficial species. Vanadium oxide was deposited using the continuous adsorption method; niobium oxide was impregnated using the incipient wetness method. The catalysts were characterized by XPS, UV-visible and IR spectroscopy. Catalytic tests were performed using propane oxidation reaction at 400oC. For coverage below the monolayer, both vanadium and niobium oxides were observed in slightly condensed superficial species. The presence of vanadium oxide on the support was found to increase the Lewis acidity and create some Bronsted acidity. Higher catalytic activity and selectivity for propene were associated with vanadium oxides. The presence of niobium did not contribute to the modification of the chemical properties of superficial vanadium but did decrease the adsorption of vanadium on the alumina.

  17. Vanadium Recovery from Oil Fly Ash by Carbon Removal and Roast-Leach Process

    Science.gov (United States)

    Jung, Myungwon; Mishra, Brajendra

    2018-02-01

    This research mainly focuses on the recovery of vanadium from oil fly ash by carbon removal and the roast-leach process. The oil fly ash contained about 85% unburned carbon and 2.2% vanadium by weight. A vanadium-enriched product was obtained after carbon removal, and the vanadium content of this product was 19% by weight. Next, the vanadium-enriched product was roasted with sodium carbonate to convert vanadium oxides to water-soluble sodium metavanadate. The roasted sample was leached with water at 60°C, and the extraction percentage of vanadium was about 92% by weight. Several analytical techniques, such as inductively coupled plasma atomic emission spectroscopy (ICP-AES), x-ray fluorescence (XRF), and thermogravimetric and differential thermal analysis (TG-DTA), were utilized for sample analyses. Thermodynamic modeling was also conducted with HSC chemistry software to explain the experimental results.

  18. The Content of Vanadium in the Egg of the Ascidian, Halocynthia roretzi and Its Changes during the Development

    OpenAIRE

    堀, 令司; 沼宮内, 隆晴; 道端, 斉; Reiji, Hori; Takaharu, Numakunai; Hitoshi, Michibata; 東北大学理学部付属浅虫臨海実験所; 富山大学理学部生物学教室; Asamushi marine biological station, Tohoku University; Biological Institute, Faculty of Science, University of Kanazawa

    1981-01-01

    The vanadium content of the egg and embryo of the ascidian, Halocynthia roretzi was determined by activation analysis. The content of vanadium in an egg remained unchanged during the cleavage. A remarkable increase in the amount of vanadium in the embryo was observed during metamorphosis. Vanadium content in the larva one year after spawning amounted to about 820,000 times of that of the unfertilized egg. The accumulation of vanadium by the ascidian was discussed in comparison with phosphorus.

  19. On the layer structure of vanadium pentoxide gels. Comment on `molecular dynamic simulation of the vanadium pentoxide gel host`

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Takeshi [Department of Fundamental Energy Science, Graduate School of Energy Sciences, Kyoto University, Kyoto (Japan); Oka, Yoshio [Department of Natural Environment Sciences, Faculty of Integrated Human Studies, Kyoto University, Kyoto (Japan)

    1997-04-16

    A comment on the article entitled `molecular dynamic simulation of the vanadium pentoxide gel host` [J. Linde and J.O. Thomas, Solid State Ionics 85 (1996) 1] is presented concerning the model structure of the V{sub 2}O{sub 5} layer of vanadium pentoxide gels. The double-layer structure used in the simulation was derived from the crystalline V{sub 2}O{sub 5}. This model structure significantly differs from the double-sheet type determined by the X-ray Rietvelt method. The simulation should be recalculated based on the double-sheet type V{sub 2}O{sub 5} layer

  20. Effects of Microwave Roasting on the Kinetics of Extracting Vanadium from Vanadium Slag

    Science.gov (United States)

    Zhang, Guoquan; Zhang, Ting-an; Lü, Guozhi; Zhang, Ying; Liu, Yan; Zhang, Weiguang

    2016-02-01

    The kinetics of extracting vanadium (V) from microwave-roasted (MR) vanadium slag (V-slag) with concentrated H2SO4 were investigated. The microwave irradiation experiments were performed in a modified microwave muffle furnace at temperatures ranging from 150°C to 750°C. The x-ray diffraction analysis indicated that the spinel phase of the V-slag is destroyed after 10 min of roasting. The phase composition of the V-slag was changed by the roasting process, and a new Fe2O3 phase appeared in the samples roasted at higher temperatures. Compared to the raw slag, the surface area, pore volume, and pore size of the MR slags were much lower. It was easier to leach V from the MR samples than the raw sample with the H2SO4 solution, and the leaching process was accelerated in the MR samples. When the V-slag was roasted at 150°C and 350°C (MR@150 and MR@350, respectively), the apparent activation energy was decreased from 77.65 kJ/mol to 68.42 kJ/mol and 66.68 kJ/mol, respectively. The process of leaching V from the raw and MR slags was controlled by both the surface chemical reactions and internal diffusion. The reaction orders of the raw, MR@150, and MR@350 V-slags, with respect to the H2SO4 concentration, were 1.23, 0.75, and 0.70, respectively.

  1. Structural and electrochemical behaviour of sputtered vanadium ...

    Indian Academy of Sciences (India)

    2006-10-13

    deposition decomposition of V2O5. It is proposed that the structure of amorphous films corresponds to a nanotextured mosaic of V2O5 and V2O4 regions. Lithium intercalation into these regions is considered to occur sequentially and ...

  2. Vanadium, rubidium and potassium in Octopus vulgaris (Mollusca: Cephalopoda

    Directory of Open Access Journals (Sweden)

    Sónia Seixas

    2005-06-01

    Full Text Available The levels of vanadium, rubidium and potassium were determined in Octopus vulgaris caught during commercial fishing activities at three locations (Cascais, Santa Luzia and Viana do Castelo in Portugal in autumn and spring. We determined the concentration of these elements in digestive gland, branchial heart, gills, mantle and arms in males and females. At least five males and five females were assessed for each season/location combination. Elemental concentrations were determined by Particle Induced X-ray Emission (PIXE. Vanadium was detectable only in digestive gland and branchial heart samples. Its concentration was not correlated with total weight, total length or mantle length. There were no differences in concentrations of V, Rb and K between sexes. There were significant differences in vanadium concentrations in branchial hearts in autumn between samples from Viana do Castelo and those from the other two sites. We found a significant positive relationship between the concentration of vanadium and those of potassium and rubidium in branchial hearts. Branchial hearts appear to play an important role in decontamination of V.

  3. Novel hybrid materials based on the vanadium oxide nanobelts

    Energy Technology Data Exchange (ETDEWEB)

    Zabrodina, G.S., E-mail: kudgs@mail.ru [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation); Makarov, S.G.; Kremlev, K.V. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation); Yunin, P.A.; Gusev, S.A. [Institute for Physics of Microstructures Russian Academy of Sciences, Nizhny Novgorod 603087 (Russian Federation); Kaverin, B.S.; Kaverina, L.B. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Ketkov, S.Yu. [G.A. Razuvaev Institute of Organometallic Chemistry of Russian Academy of Sciences, Nizhny Novgorod 603950 (Russian Federation); Lobachevsky State University, Nizhny Novgorod 603950 (Russian Federation)

    2016-04-15

    Graphical abstract: - Highlights: • Flat and curved vanadium oxide nanobelts have been synthesized. • Hybrid material was prepared via decoration of flexible nanobelts with zinc phthalocyanine. • Investigations of the thermal stability, morphologies and structures were carried out. - Abstract: Novel hybrid materials based on zinc phthalocyanine and nanostructured vanadium oxides have attracted extensive attention for the development of academic research and innovative industrial applications such as flexible electronics, optical sensors and heterogeneous catalysts. Vanadium oxides nanobelts were synthesized via a hydrothermal treatment V{sub 2}O{sub 5}·nH{sub 2}O gel with surfactants (TBAB, CTAB) used as structure-directing agents, where CTAB – cetyltrimethylammonium bromide, TBAB – tetrabutylammonium bromide. Hybrid materials were prepared decoration of (CTA){sub 0.33}V{sub 2}O{sub 5} flexible nanobelts with cationic zinc phthalocyanine by the ion-exchange route. Investigations of the thermal stability, morphologies and structures of the (CTA){sub 0.33}V{sub 2}O{sub 5}, (TBA){sub 0.16}V{sub 2}O{sub 5} nanobelts and zinc phthalocyanine exchange product were carried out. The hybrid materials based on the nanostructured vanadium oxide and zinc phthalocyanine were tested as photocatalysts for oxidation of citronellol and 2-mercaptoethanol by dioxygen.

  4. Structural and catalytic properties of a novel vanadium containing ...

    Indian Academy of Sciences (India)

    Abstract. A novel vanadium containing solid core mesoporous silica shell catalyst was synthesized with different Si/V ratios by sol-gel method under neutral conditions. The synthesized materials were characterized by various techniques and gas phase diphenyl methane oxidation reaction. The mesoporosity combined with ...

  5. Halofunctionalization of alkenes by vanadium chloroperoxidase from Curvularia inaequalis

    NARCIS (Netherlands)

    Dong, J.; Fernandez Fueyo, E.; Li, Jingbo; Guo, Zheng; Renirie, Rokus; Wever, Ron; Hollmann, F.

    The vanadium-dependent chloroperoxidase from Curvularia inaequalis is a stable and efficient biocatalyst for the hydroxyhalogenation of a broad range of alkenes into halohydrins. Up to 1 200 000 TON with 69 s−1 TOF were observed for the biocatalyst. A bienzymatic cascade to yield epoxides as

  6. Combined effect of vanadium and nickel on lipid peroxidation and ...

    African Journals Online (AJOL)

    In this investigation, hepatorenal antioxidant effects of combined oral administration of ammonium metavanadate (AMV; 0.15 mg V/ml) and nickel sulfate (NS; 0.18 mg Ni/ml) in male albino rats over a 21- day period have been evaluated. After administration of vanadium, lipid peroxidation (LPO) increased significantly (p ...

  7. TWO LIGAND OXIDIO-VANADIUM(IV) COMPLEXES AS NOVEL ...

    African Journals Online (AJOL)

    TWO LIGAND OXIDIO-VANADIUM(IV) COMPLEXES AS NOVEL EFFICIENT. CATALYSTS IN MULTICOMPONENT REACTIONS FOR SYNTHESIS OF. TETRAHYDROBENZOPYRAN DERIVATIVES. Mehdi Abaszadeh1,2*, Mohammad Seifi3 and S. Yousef Ebrahimipour 4,5. 1Pharmaceutics Research Center, Institute of ...

  8. Neurotoxic profiles of vanadium when administered at the onset of ...

    African Journals Online (AJOL)

    Further “immune” assays revealed astrocytic activation (GFAP stain), demyelination (CNPase) and activated microglia (Iba1) due to vanadium which were ameliorated by the administration of vit E to the dams. The pups whose dams were administered with vit E alone showed signs of cellular degeneration which might be ...

  9. A model approach to vanadium involvement in crude oil refining

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The research during the last nine months has continued with the overall goal of developing V/S chemistry and has been concentrated on the two main areas of the project: the reactivity chemistry of vanadyl complexes, and the development of sulfide-bridged vanadium cluster chemistry. Significant new progress has been achieved in both these areas.

  10. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3() ZnO(40-)V2O5(60) (where = 0.1–0.5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been calculated.

  11. Geochemical behaviour of vanadium in iron—titanium oxides

    NARCIS (Netherlands)

    Schuiling, R.D.; Feenstra, A.

    The following geochemical rules-of-thumb seem to hold for vanadium: 1. (1) Magnetites as a group have higher V contents than either hematites or ilmenites. 2. (2) In magnetite—hematite pairs, however, the hematite has the higher V content. 3. (3) In magnetite—ilmenite pairs, the magnetite

  12. Vanadium Effect on a Medium Carbon Forging Steel

    Directory of Open Access Journals (Sweden)

    Carlos Garcia-Mateo

    2016-05-01

    Full Text Available In the present work the influence of vanadium on the hardenability and the bainitic transformation of a medium carbon steel is analyzed. While V in solid solution enhances the former, it hardly affects bainitic transformation. The results also reveal an unexpected result, an increase of the prior austenite grain size as the V content increases.

  13. determination of vanadium in foods by atomic absorption spectrometry

    African Journals Online (AJOL)

    This paper presents an assessment of the level of vanadium in foods (Plantain, Musa spp; Yam, Discorea rotundata; and Maize, Zea mays) from ten popular market places in Lagos metropolis, Nigeria. Total acid leaching digestion method was employed and determination was by Flame Atomic Absorption ...

  14. Effects of Vanadium Pentoxide on the Histological and Sperm ...

    African Journals Online (AJOL)

    The pharmacological effects of intraperitoneal administration of different doses of vanadium pentoxide (V2O5) on the histological and sperm parameters of male guinea pigs were investigated. Also investigated were the effects of oral pretreatment with different doses of vitamin E (a known protein kinase C inhibitor) on the ...

  15. Partial Oxidation of n-Pentane over Vanadium Phosphorus Oxide ...

    African Journals Online (AJOL)

    The selective oxidation of n-pentane to value-added products, maleic anhydride or phthallic anhydride by vanadium phosphorus oxide loaded on hydroxyapatites as catalysts and oxygen as oxidant was investigated. Hydroxyapatite (HAp) and cobalthydroxyapatite (Co-HAp) were prepared by the co-precipitation method ...

  16. Role of vanadium in Keggin heteropoly molybdate supported on ...

    Indian Academy of Sciences (India)

    ated for oxidation of 1,2-benzenedimethanol using H2O2 and O2 as oxidants. .... C on oil bath. In the case of O2 as oxidant, reaction was conducted under O2 atmosphere. Progress of the reaction was monitored by using thin-layer chro- ... The role of vanadium in heteropoly molybdate catalysts for oxidation reactions. 469.

  17. Speciation of Chromium and Vanadium in Medicinal Plants

    African Journals Online (AJOL)

    NICOLAAS

    Results of the determination of water-soluble (hot water) Cr(VI) and V(V) concentrations ... tive and purging gas. 2.2. Quality Assurance. The analytical results for the determination of chromium and vanadium were validated through the analysis of certified refer- ... were filtered through 0.45 µm hydrophilic PVDF filter prior the.

  18. Organometalic carbosilane polymers containing vanadium and their preparation

    Science.gov (United States)

    Yajima, S.; Okamura, K.; Shishido, T.; Fukuda, K.

    1983-01-01

    The present invention concerns a new organometallic polymer material containing in part a vanadium-siloxane linkage (V-0-Si), which has excellent resistance to heat and oxidation and a high residue ratio after high temperature treatment in a non-oxidizing atmosphere, for example, nitrogen, argon, helium, ammonia, or hydrogen.

  19. Novel vanadium phosphate phases as catalysts for selective oxidation

    Indian Academy of Sciences (India)

    Unknown

    important vanadium phosphate phases used as selective oxidation catalysts, it has been observed that ... molybdenum oxides are the most widely used ones for the selective oxidation of alkanes. Amongst these the ... pentane to maleic and pthalic anhydride, and in the oxidative dehydrogenation of ethane, propane etc 4.

  20. Electrically tunable sign of capacitance in planar W-doped vanadium dioxide micro-switches

    Directory of Open Access Journals (Sweden)

    Mohammed Soltani, Mohamed Chaker and Joelle Margot

    2011-01-01

    Full Text Available Negative capacitance (NC in a planar W-doped VO2 micro-switch was observed at room temperature in the low-frequency range 1 kHz–10 MHz. The capacitance changed from positive to negative values as the W-doped VO2 active layer switched from semiconducting to metallic state under applied voltage. In addition, a capacitance–voltage hysteresis was observed as the applied voltage was cycled from −35 to 35 V. These observations suggest that NC results from the increase of the electrically induced conductivity in the active layer. This NC phenomenon could be exploited in advanced multifunctional devices including ultrafast switches, field-effect transistors and memcapacitive systems.

  1. Ambient redox synthesis of vanadium-doped manganese dioxide nanoparticles and their enhanced zinc storage properties

    Energy Technology Data Exchange (ETDEWEB)

    Alfaruqi, Muhammad Hilmy; Islam, Saiful; Mathew, Vinod; Song, Jinju; Kim, Sungjin; Tung, Duong Pham; Jo, Jeonggeun; Kim, Seokhun; Baboo, Joseph Paul; Xiu, Zhiliang; Kim, Jaekook, E-mail: jaekook@chonnam.ac.kr

    2017-05-15

    Highlights: • The V-doped MnO{sub 2} was prepared by a simple ambient redox reaction. • The V-doped MnO{sub 2} was tested as a cathode in aqueous zinc-ion batteries (ZIBs). • The doped cathode showed better zinc-storage properties than the bare cathode. • The present study facilitates the development of safe and reliable aqueous ZIBs. - Abstract: In this work, we demonstrate the first use of a V-doped MnO{sub 2} nanoparticle electrode for zinc-ion battery (ZIB) applications. The V-doped MnO{sub 2} was prepared via a simple redox reaction and the X-ray diffraction studies confirmed the formation of pure MnO{sub 2}, accompanied by an anisotropic expansion of MnO{sub 2} lattice, suggesting the incorporation of V-ions into the MnO{sub 2} framework. V doping of MnO{sub 2} not only increased the specific surface area but also improved the electronic conductivity. When Zn-storage properties were tested, the V-doped MnO{sub 2} electrode registered a higher discharge capacity of 266 mAh g{sup −1} compared to 213 mAh g{sup −1} for the pure MnO{sub 2} electrode. On prolonged cycling, the doped electrode retained 31% higher capacity than that of the bare MnO{sub 2} electrode and thereby demonstrated superior cycling performance. This study may pave the way towards understanding the enhancement of the energy storage properties via doping in electrodes of aqueous ZIB applications and also furthers the efforts for the practical realization of a potential eco-friendly battery system.

  2. ESR studies of slow relaxations of the rate of sulfur dioxide oxidation on vanadium catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Kozyrev, S.V.; Balzhinimaev, B.S.; Boreskov, G.K.; Ivanov, A.A.; Mastikhin, V.M. (AN SSSR, Novosibirsk. Inst. Kataliza)

    1982-01-01

    Slow changes in the rate of the title reaction are shown to be due to phase transformations of the active component, in particular, the agglomeration or crystallization of vanadyl complexes. The possible mechanism of these phenomena is discussed.

  3. Ultrafast Silicon-based Modulators using Optical Switching of Vanadium Dioxide

    Science.gov (United States)

    2014-12-04

    open windows for VO2 deposition, using ZEP 520A spun at 2,000 rpm (~500nm thick) to better facilitate VO2 lift -off. Amorphous VOx was then deposited...by electron-beam vaporization of VO2 powder (100 mesh, 99.5% purity) in an Ångstrom Engineering deposition system. After deposition, lift -off in...w. holes), transformation optics coupler outline without holes (w/o holes), and butt - coupled waveguide with no coupler ( butt coupling). Adapted from

  4. The ternary system: silicon-uranium-vanadium

    Energy Technology Data Exchange (ETDEWEB)

    Noel, Henri [Laboratoire de Chimie du Solide et Materiaux, UMR-CNRS 6226, Universite de Rennes I, Avenue du General Leclerc, F-35042 Rennes, Cedex (France); Rogl, Peter Franz, E-mail: peter.franz.rogl@univie.ac.a [Institute of Physical Chemistry, University of Vienna, A-1090 Wien, Waehringerstrasse 42 (Austria)

    2010-09-01

    Phase equilibria in the system Si-U-V were established at 1100 {sup o}C by optical microscopy, EMPA and X-ray diffraction. Two ternary compounds were observed, U{sub 2}V{sub 3}Si{sub 4} and (U{sub 1-x}V{sub x}){sub 5}Si{sub 3}, for which the crystal structures were elucidated by X-ray powder data refinement and found to be isotypic with the monoclinic U{sub 2}Mo{sub 3}Si{sub 4}-type (space group P2{sub 1}/c; a = 0.6821(3), b = 0.6820(4), c = 0.6735(3) nm, {beta} = 109.77(1){sup o}) and the tetragonal W{sub 5}Si{sub 3}-type (space group I4/mcm, a = 1.06825(2), c = 0.52764(2) nm), respectively. (U{sub 1-x}V{sub x}){sub 5}Si{sub 3} appears at 1100 {sup o}C without any significant homogeneity region at x {approx} 0.2 resulting in a formula U{sub 4}VSi{sub 3} which corresponds to a fully ordered atom arrangement. DTA experiments clearly show decomposition of this phase above 1206 {sup o}C revealing a two-phase region U{sub 3}Si{sub 2} + V{sub 3}Si. At 1100 {sup o}C U{sub 4}VSi{sub 3} is in equilibrium with V{sub 3}Si, V{sub 5}Si{sub 3}, U{sub 3}Si{sub 2} and U(V). At 800 {sup o}C U{sub 4}VSi{sub 3} forms one vertex of the tie-triangle to U{sub 3}Si and V{sub 3}Si. Due to the rather high thermodynamic stability of V{sub 3}Si and the corresponding tie-lines V{sub 3}Si + liquid at 1100 {sup o}C and V{sub 3}Si + U(V) below 925 {sup o}C, no compatibility exists between U{sub 3}Si or U{sub 3}Si{sub 2} and vanadium metal.

  5. Crossing points in the electronic band structure of vanadium oxide

    Directory of Open Access Journals (Sweden)

    Keshav N. Shrivastava

    2010-03-01

    Full Text Available The electronic band structures of several models of vanadium oxide are calculated. In the models 1-3, every vanadium atom is connected to 4 oxygen atoms and every oxygen atom is connected to 4 vanadium atoms. In model 1, a=b=c 2.3574 Å; in model 2, a= 4.7148 Å, b= 2.3574 Å and c= 2.3574 Å; and in model 3, a= 4.7148 Å, b= 2.3574 Å and c= 4.7148 Å. In the models 4-6, every vanadium atom is connected to 4 oxygen atoms and every oxygen atom is connected to 2 vanadium atoms. In model 4, a=b= 4.551 Å and c= 2.851 Å; in model 5, a=b=c= 3.468 Å; and in model 6, a=b=c= 3.171 Å. We have searched for a crossing point in the band structure of all the models. In model 1 there is a point at which five bands appear to meet but the gap is 7.3 meV. In model 2 there is a crossing point between G and F points and there is a point between F and Q with the gap ≈ 3.6608 meV. In model 3, the gap is very small, ~ 10-5 eV. In model 4, the gap is 5.25 meV. In model 5, the gap between Z and G points is 2.035 meV, and in model 6 the gap at Z point is 4.3175 meV. The crossing point in model 2 looks like one line is bent so that the supersymmetry is broken. When pseudopotentials are replaced by a full band calculation, the crossing point changes into a gap of 2.72 x 10-4 eV.

  6. Carbon dioxide as chemical feedstock

    National Research Council Canada - National Science Library

    Aresta, M

    2010-01-01

    ... Dioxide as an Inert Solvent for Chemical Syntheses 15 Alessandro Galia and Giuseppe Filardo Introduction 15 Dense Carbon Dioxide as Solvent Medium for Chemical Processes 15 Enzymatic Catalysis in Dense Carbon Dioxide 18 Other Reactions in Dense Carbon Dioxide 19 Polymer Synthesis in Supercritical Carbon Dioxide 20 Chain Polymerizations: Synt...

  7. A novel comprehensive utilization of vanadium slag: As gamma ray shielding material

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Mengge [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Xue, Xiangxin, E-mail: xuexx@mail.neu.edu.cn [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Yang, He; Liu, Dong [School of Metallurgy, Northeastern University, Shenyang 110004 (China); Liaoning Key Laboratory of Metallurgical Resources Recycling Science, Shenyang 110004 (China); Wang, Chao [Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Li, Zhefu [Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201800 (China)

    2016-11-15

    Highlights: • A novel comprehensive utilization method for vanadium slag is proposed. • Shielding properties of vanadium slag are better than ordinary concrete. • HVL of vanadium slag is between Lead and concrete to shield {sup 60}Co gamma ray. • HVL of composite is higher than concrete when adding amount of vanadium slag is 900. • Composite can be used as injecting mortar for cracks developed in concrete shields. - Abstract: New exploration of vanadium slag as gamma ray shielding material was proposed, the shielding properties of vanadium slag was higher than concrete when the energy of photons was in 0.0001 MeV–100000 MeV. Vanadium slag/epoxy resin composites were prepared, shielding and material properties of materials were tested by {sup 60}Co gamma ray, simultaneous DSC-TGA, electronic universal testing machine and scanning electron microscopy, respectively. The results showed that the shielding properties of composite would be better with the increase of vanadium slag addition amount. The HVL (half value layer thickness) of vanadium slag was between Lead and concrete while composite was higher than concrete when the addition amount of vanadium slag was 900 used as material to shield {sup 60}Co gamma ray, also the resistance temperature of composite was about 215 °C and the bending strength was over 10 MPa. The composites could be used as injecting mortar for cracks developed in biological concrete shields, coating for the floor of the nuclear facilities, and shielding materials by itself.

  8. Strong quasiparticle trapping In A 6×6 array of vanadium-aluminum superconducting tunnel junctions

    Science.gov (United States)

    Brammertz, G.; Peacock, A.; Verhoeve, P.; Kozorezov, A.; den Hartog, R.; Rando, N.; Venn, R.

    2002-02-01

    A 6×6 array of symmetrical V/Al/AlOx/Al/V Superconducting Tunnel Junctions (STJs) was fabricated. The base electrode is a high quality epitaxial film with a residual resistance ratio (RRR) of ~30. The top film is polycrystalline with an RRR of ~10. The leakage currents of the 25×25 μm2 junctions are of the order of 0.5 pA/μm2 at a bias voltage of 100 μV, which corresponds to a dynamical resistance of ~3105 Ω. When the array was illuminated by 6 keV X-ray photons from a 55Fe radioactive source the single photon charge output was found to be low and strongly dependent on the temperature of the devices. This temperature dependence at X-ray energies can be explained by the existence of a very large number of quasiparticle (QP) traps in the Vanadium. QPs are confined in these traps, having a lower energy gap than the surrounding material, and are therefore not available for tunneling. The number of traps can be derived from the energy dependence of the responsivity of the devices (charge output per electron volt of photon input energy). .

  9. The role of phosphate additive in stabilization of sulphuric-acid-based vanadium(V) electrolyte for all-vanadium redox-flow batteries

    Science.gov (United States)

    Roznyatovskaya, Nataliya V.; Roznyatovsky, Vitaly A.; Höhne, Carl-Christoph; Fühl, Matthias; Gerber, Tobias; Küttinger, Michael; Noack, Jens; Fischer, Peter; Pinkwart, Karsten; Tübke, Jens

    2017-09-01

    Catholyte in all-vanadium redox-flow battery (VRFB) which consists of vanadium salts dissolved in sulphuric acid is known to be stabilized by phosphoric acid to slow down the thermal aging at temperatures higher than 40 °C. To reveal the role of phosphoric acid, the thermally-induced aggregation is investigated using variable-temperature 51V, 31P, 17O, 1H nuclear magnetic resonance (NMR) spectroscopy and dynamic light scattering (DLS). The results indicate that the thermal stabilization of vanadium(V) electrolyte is attained by the involvement of monomeric and dimeric vanadium(V) species in the reaction with phosphoric acid which is concurrent to the formation of neutral hydroxo-aqua vanadium(V) precipitation precursor. The dimers are stabilized by counter ions due to association reaction or if such stabilization is not possible, precipitation of vanadium pentoxide is favored. The evolution of particles size distributions at 50 °C in electrolyte samples containing 1.6 M vanadium and 4.0 M total sulphate and the pathways of precipitate formation are discussed. The optimal total phosphate concentration is found to be of 0.15 M. However, the induction time is assumed to be dependent not only on the total phosphate concentrations, but also on the ratio of total vanadium(V) to sulphate concentrations.

  10. Thermodynamics and kinetics of reactions involving vanadium in natural systems: Accumulation of vanadium in sedimentary rocks

    Science.gov (United States)

    Wanty, R.B.; Goldhaber, M.B.

    1992-01-01

    A critical review of thermodynamic data for aqueous and solid V species is presented to evaluate dissolution, transport, and precipitation of V under natural conditions. Emphasis is given to results of experimental studies of V chemistry, especially those for which the experimental conditions are near those found in nature. Where possible, data are obtained for or corrected to the reference conditions of 298.15K, 1 atm (1.01325 bar) and zero ionic strength. Vanadium [IV] (VIV) and vanadium[V] (VV) are the most soluble forms of V in nature, and their complexes with fluoride, sulfate, and oxalate may act to increase V solubility under oxidizing conditions. Because redox behavior is of fundamental importance to understanding natural V chemistry, the kinetics of reduction of VIV to VIII H2S were studied. Although H2S is predicted from thermodynamic data to be capable of reducing VIV to VIII, this reaction has not been demonstrated experimentally. Experiments were carried out under conditions of temperature (45??C), pH (3.6-6.8), ionic strength (0.05-0.1 m), and V concentrations (9.8-240 ??molar) likely to be found in nature. Because the reaction is very slow, H2S concentrations in excess of natural conditions were used (8.1 ?? 10-4 to 0.41 atm). The results show that VIV is reduced to VIII under a variety of conditions. The rate increases with increasing pH, but is not appreciably affected by ionic strength (as represented by the concentration of KCl, which was used as the supporting electrolyte in all cases). Prior to initiation of the reaction, there is an induction period, the length of which increases with increasing KCl concentration or decreasing pH. Attempts to model the reaction mechanism by numerical methods have failed to produce a satisfying fit of the results, indicating partial reaction orders, a complex mechanism, or involvement of a variety of intermediate species. The results of the thermodynamic and kinetic studies were applied to understanding the

  11. Influence of doping in thermochromic V{sub 1−x}W{sub x}O{sub 2} and V{sub 1−x}Al{sub x}O{sub 2} thin films: Twice improved doping efficiency in V{sub 1−x}W{sub x}O{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Paone, Antonio, E-mail: antonio.paone@epfl.ch [Solar Energy and Building Physics Laboratory (LESO-PB), EPFL, CH-1015 Lausanne (Switzerland); Sanjines, Rosendo, E-mail: rosendo.sanjines@epfl.ch [Laboratory of Physics of Complex Matter (LPMC), EPFL, CH-1015 Lausanne (Switzerland); Jeanneret, Patrick, E-mail: patrick.jeanneret@he-arc.ch [University of Applied Sciences (HES-SO), Haute École Arc, Eplatures-Grise 17, CH-2300 La Chaux-de-Fonds (Switzerland); Whitlow, Harry J., E-mail: harry.whitlow@he-arc.ch [University of Applied Sciences (HES-SO), Haute École Arc, Eplatures-Grise 17, CH-2300 La Chaux-de-Fonds (Switzerland); Guibert, Edouard, E-mail: edouard.guibert@he-arc.ch [University of Applied Sciences (HES-SO), Haute École Arc, Eplatures-Grise 17, CH-2300 La Chaux-de-Fonds (Switzerland); Guibert, Geoffroy, E-mail: geoffroy.guibert@h-ne.ch [University of Applied Sciences (HES-SO), Haute École Arc, Eplatures-Grise 17, CH-2300 La Chaux-de-Fonds (Switzerland); Bussy, François, E-mail: francois.bussy@unil.ch [Institute of Mineralogy and Geochemistry (IMG), UNIL, CH-1015 Lausanne (Switzerland); Scartezzini, Jean-Louis, E-mail: jean-louis.scartezzini@epfl.ch [Solar Energy and Building Physics Laboratory (LESO-PB), EPFL, CH-1015 Lausanne (Switzerland); Schüler, Andreas, E-mail: andreas.schueler@epfl.ch [Solar Energy and Building Physics Laboratory (LESO-PB), EPFL, CH-1015 Lausanne (Switzerland)

    2015-02-05

    Highlights: • V{sub 1−x}W{sub x}O{sub 2} films were deposited by thermal evaporation using V-pellets in tungsten crucibles. • V{sub 1−x}W{sub x}O{sub 2} and V{sub 1−x}Al{sub x}O{sub 2} films were deposited by RF-reactive magnetron sputtering using V-target. • XRD analyses were performed on V{sub 1−x}W{sub x}O{sub 2} and V{sub 1−x}Al{sub x}O{sub 2} films. • The W-concentration in V{sub 1−x}W{sub x}O{sub 2} films was precisely determined by RBS investigations. • The doping efficiency in the present study is twice as effective as reported in literature. - Abstract: The parameters of thermal evaporation and magnetron sputtering deposition were optimized for fabrication of vanadium dioxide thin films. The O{sub 2} partial pressure during film deposition is critical for obtaining a pure VO{sub 2} phase. Thermochromic V{sub 1−x}W{sub x}O{sub 2} (x = 0.16 at.%) thin films were synthesized by thermal evaporation, while thermochromic VO{sub 2}, V{sub 1−x}W{sub x}O{sub 2} (x = 0.04 at.%, 0.12 at.%, 0.35 at.%) and V{sub 1−x}Al{sub x}O{sub 2} thin films were synthesized by magnetron sputtering. The structural properties of the deposited films were analyzed by X-Ray Diffraction (XRD), while their semiconductor-to-metal phase transitions were studied by electrical resistivity using the four-probe technique. Contamination from the crucible was shown by chemical analysis of the V{sub 1−x}W{sub x}O{sub 2} film deposited by thermal evaporation. Subsequent analyses of the films by Rutherford Backscattering Spectrometry (RBS), yielded doping efficiency of −49 ± 5°C/at.% and of −55 ± 7°C/at.% is respectively reported for films deposited by thermal evaporation and for films deposited by magnetron sputtering. These results suggest that the doping efficiency observed in the present study is twice as effective as previously reported in literature. X-ray diffraction analyses showed a progressive amorphization of the V{sub 1−x}Al{sub x}O{sub 2} films

  12. A novel process for the recovery of iron, titanium, and vanadium from vanadium-bearing titanomagnetite: sodium modification-direct reduction coupled process

    Science.gov (United States)

    Zhang, Yi-min; Yi, Ling-yun; Wang, Li-na; Chen, De-sheng; Wang, Wei-jing; Liu, Ya-hui; Zhao, Hong-xin; Qi, Tao

    2017-05-01

    A sodium modification-direct reduction coupled process was proposed for the simultaneous extraction of V and Fe from vanadium- bearing titanomagnetite. The sodium oxidation of vanadium oxides to water-soluble sodium vanadate and the transformation of iron oxides to metallic iron were accomplished in a single-step high-temperature process. The increase in roasting temperature favors the reduction of iron oxides but disfavors the oxidation of vanadium oxides. The recoveries of vanadium, iron, and titanium reached 84.52%, 89.37%, and 95.59%, respectively. Moreover, the acid decomposition efficiency of titanium slag reached 96.45%. Compared with traditional processes, the novel process provides several advantages, including a shorter flow, a lower energy consumption, and a higher utilization efficiency of vanadium-bearing titanomagnetite resources.

  13. Investigation on the oxidation behavior of AlCrVxN thin films by means of synchrotron radiation and influence on the high temperature friction

    Science.gov (United States)

    Tillmann, Wolfgang; Kokalj, David; Stangier, Dominic; Paulus, Michael; Sternemann, Christian; Tolan, Metin

    2018-01-01

    Friction minimization is an important topic which is pursued in research and industry. In addition to the use of lubricants, friction-reducing oxide phases can be utilized which occur during. These oxides are called Magnéli phases and especially vanadium oxides exhibit good friction reducing properties. Thereby, the lubrication effect can be traced back to oxygen deficiencies. AlCrN thin films are being used as coatings for tools which have to withstand high temperatures. A further improvement of AlCrN thin films concerning their friction properties is possible by incorporation of vanadium. This study analyzes the temperature dependent oxidation behavior of magnetron sputtered AlCrVN thin films with different vanadium contents up to 13.5 at.-% by means of X-ray diffraction and X-ray absorption near-edge spectroscopy. Up to 400 °C the coatings show no oxidation. A higher temperature of 700 °C leads to an oxidation and formation of Magnéli phases of the coatings with vanadium contents above 10.7 at.-%. Friction coefficients, measured by ball-on-disk test are correlated with the oxide formation in order to figure out the effect of vanadium oxides. At 700 °C a decrease of the friction coefficient with increasing vanadium content can be observed, due to the formation of VO2, V2O3 and the Magnéli phase V4O7.

  14. Carbon Dioxide Fountain

    Science.gov (United States)

    Kang, Seong-Joo; Ryu, Eun-Hee

    2007-01-01

    This article presents the development of a carbon dioxide fountain. The advantages of the carbon dioxide fountain are that it is odorless and uses consumer chemicals. This experiment also is a nice visual experiment that allows students to see evidence of a gaseous reagent being consumed when a pressure sensor is available. (Contains 3 figures.)…

  15. DFT Studies on the Mechanism of the Vanadium-Catalyzed Deoxydehydration of Diols.

    Science.gov (United States)

    Galindo, Agustín

    2016-03-07

    The mechanism of the vanadium-catalyzed deoxydehydration of glycols to alkenes by phosphanes (Chapman, G.; Nicholas, K. M. Chem. Commun. 2013, 49, 8199-8201) has been investigated with density functional calculations. Two alternative pathways, A and B, have been evaluated, and the three stages generally recognized in DODH processes have been identified: (i) activation of the diol by condensation on the vanadium complex and eventual formation of vanadium-glycolate, (ii) oxygen atom transfer to phosphane with reduction to a vanadium(III) species, and, finally, (iii) alkene extrusion from the vanadium-glycolate with regeneration of the starting catalyst. Pathway B, in which the reduction by the phosphane from vanadium(V) to V(III) species occurred before the diol condensation, is energetically preferred to pathway A, in which the diol activation preceded the oxo-transfer to the phosphane reductant.

  16. Extraction of Vanadium from Stone Coal by Microwave Assisted Sulfation Roasting

    Science.gov (United States)

    Wang, Mingyu; Xian, Pengfei; Wang, Xuewen; Li, Bowen

    2015-02-01

    The extraction of vanadium from stone coal was investigated by microwave-assisted sulfation roasting followed by water leaching. The results showed that this process is an effective method for the extraction of vanadium from stone coal. Microwave-assisted sulfation roasting promotes the reaction of sulfuric acid with vanadium oxides and decreases roasting time. Under optimized conditions (roasting temperature 200°C, heating rate of 10°C/min, 25% sulfuric acid addition, water leaching at 75°C for 1 h, and liquid/solid ratio of 1.5 ml/g), the leaching rate of vanadium reached 92.6%.

  17. Vanadium accelerates horizontal transfer of tet(M) gene from marine Photobacterium to Escherichia coli.

    Science.gov (United States)

    Suzuki, Satoru; Kimura, Midori; Agusa, Tetsuro; Rahman, Habibur M

    2012-11-01

    Vanadium is a contaminant from steel additive and ship fuel in coastal and port areas, and its effect on marine microbes remains largely unknown. We showed that vanadium accelerates transfer of the tetracycline resistance gene tet(M) from Photobacterium to Escherichia coli, and found a positive correlation between the concentration of vanadium in natural marine sediment and the rate of oxytetracycline resistance. These results suggest the possibility that vanadium may play a role in the preservation and horizontal transfer of antibiotic resistance genes in the marine environment. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

  18. Distribution of vanadium and vanadylporphyrines in petroleum fractions of different chemical types

    Energy Technology Data Exchange (ETDEWEB)

    Aleshin, G.N.; Altukhova, Z.P.; Antipenko, V.R.; Marchenko, S.P.; Kam' yanov, V.F.

    Distribution of vanadium among petroleum components: tars, asphaltenes and oils from various levels of Samotlorsk fields was studied. It was shown that the predominant fraction of vanadium and vanadyl porphyrines is concentrated in petroleum tars. The highest absolute concentration of V was noted in the asphaltene fraction; however, vanadium atoms were found to be bound to heteroatomic fragments of the tarry-asphaltene compounds. Up to 98% of vanadium contained in asphaltenes and almost all V atoms in oil fractions are bound by non-porphyrinyl compounds. With increased methanization of the petroleum fractions, their V content drops rapidly. 5 references, 2 figures.

  19. Exploring the chemistry and biology of vanadium-dependent haloperoxidases.

    Science.gov (United States)

    Winter, Jaclyn M; Moore, Bradley S

    2009-07-10

    Nature has developed an exquisite array of methods to introduce halogen atoms into organic compounds. Most of these enzymes are oxidative and require either hydrogen peroxide or molecular oxygen as a cosubstrate to generate a reactive halogen atom for catalysis. Vanadium-dependent haloperoxidases contain a vanadate prosthetic group and utilize hydrogen peroxide to oxidize a halide ion into a reactive electrophilic intermediate. These metalloenzymes have a large distribution in nature, where they are present in macroalgae, fungi, and bacteria, but have been exclusively characterized in eukaryotes. In this minireview, we highlight the chemistry and biology of vanadium-dependent haloperoxidases from fungi and marine algae and the emergence of new bacterial members that extend the biological function of these poorly understood halogenating enzymes.

  20. Exploring the Chemistry and Biology of Vanadium-dependent Haloperoxidases*

    Science.gov (United States)

    Winter, Jaclyn M.; Moore, Bradley S.

    2009-01-01

    Nature has developed an exquisite array of methods to introduce halogen atoms into organic compounds. Most of these enzymes are oxidative and require either hydrogen peroxide or molecular oxygen as a cosubstrate to generate a reactive halogen atom for catalysis. Vanadium-dependent haloperoxidases contain a vanadate prosthetic group and utilize hydrogen peroxide to oxidize a halide ion into a reactive electrophilic intermediate. These metalloenzymes have a large distribution in nature, where they are present in macroalgae, fungi, and bacteria, but have been exclusively characterized in eukaryotes. In this minireview, we highlight the chemistry and biology of vanadium-dependent haloperoxidases from fungi and marine algae and the emergence of new bacterial members that extend the biological function of these poorly understood halogenating enzymes. PMID:19363038

  1. A novel process for comprehensive utilization of vanadium slag

    Science.gov (United States)

    Liu, Li-ying; Du, Tao; Tan, Wen-jun; Zhang, Xin-pu; Yang, Fan

    2016-02-01

    Traditional processes for treating vanadium slag generate a huge volume of solid residue and a large amount of harmful gas, which cause serious environmental problems. In this study, a new process for the comprehensive utilization of vanadium slag was proposed, wherein zeolite A and a V2O5/TiO2 system were synthesized. The structural properties of the as-synthesized zeolite A and the V2O5/TiO2 system were characterized using various experimental techniques, including X-ray diffraction, X-ray fluorescence, scanning electron microscopy, and infrared spectroscopy. The results reveal that zeolite A and the V2O5/TiO2 system are successfully obtained with high purity. The results of gas adsorption measurements indicate that the prepared zeolite A exhibits high selectivity for CO2 over N2 and is a candidate material for CO2 capture from flue-gas streams.

  2. Study of sulfur and vanadium in heavy petroleum products

    Energy Technology Data Exchange (ETDEWEB)

    Novelli, J.M.

    1982-10-01

    Sulfur compounds in heavy oil fractions (>450/sup 0/C) are studied in the first part of this work. After chemical oxidation by metachloroperbenzoic acid to obtain sulfones, sulfur compounds are analyzed by infrared spectroscopy for their qualitative and quantitative repartition. The method can be applied for the study of sulfur containing molecules before and after structural modifications of petroleum fractions by any chemical refining processes. In a second part vanadium is characterized in asphalt by physicochemical and chemical methods. 80% of the vanadium in a Boscan asphalt is under the form of porphyrins. Different associations are evidenced in petroleum fractions and metalloporphyrins, but the liaison between the vanadyl group and heterocondensate from asphalts is the more frequent.

  3. Rechargeable lithium cells with modified vanadium oxide cathodes

    Science.gov (United States)

    Chung, S. K.; Chmilenko, N. A.; Borovykov, A. Ya; Lee, S. H.

    Modified vanadium oxide has been prepared by melting V 2O 5 with additives of 3-3.5% of sodium orthosilicate at 690°C for 3 h followed by fast cooling to an ambient temperature. Charge-discharge characteristics of this oxide were studied as an active cathode material for lithium secondary batteries. The oxide undergoes irreversible transition to become essentially amorphous after first discharge to cut-off voltage of 2 V vs. Li, and then exhibits excellent rechargeability in the 1.5 to 3.9 V potential range. The coin type 2325 size secondary cells have been manufactured and tested with the modified vanadium oxide cathodes and Li-Al alloy anodes. Preliminary shallow cycling modifies the cells' performance and allows to obtain rating capacity 50 mA h in the voltage diapason of 2.0-3.9 V with draining current 0.5 mA.

  4. Hypoglycemic activity of Grifola frondosa rich in vanadium.

    Science.gov (United States)

    Cui, Bo; Han, Linna; Qu, Jingran; Lv, Yingtao

    2009-11-01

    The hypoglycemic activity of fermented mushroom of Grifola frondosa rich in vanadium (GFRV) was studied in this paper. Alloxan- and adrenalin-induced hyperglycemic mice were used in the study. The blood glucose and the HbA1c of the mice were analyzed respectively. After the mice were administered (ig) with GFRV, the blood glucose and the HbA1c of alloxan-induced hyperglycemic mice decreased (p < 0.05, p < 0.01) and ascension of blood glucose induced by adrenalin was inhibited (p < 0.01). Also, the bodyweight of the alloxan-induced hyperglycemic mice was increased gradually. In the fermented mushroom of G. frondosa, vanadium at lower doses in combination with G. frondosa induced significant decreases of the blood glucose and HbA1c levels in hyperglycemic mice.

  5. Spectrophotometric determination of catecholamine using vanadium and eriochrome cyanine r

    Energy Technology Data Exchange (ETDEWEB)

    Nagaraja, Padmarajaiah; Shrestha, Ashwinee Kumar; Shivakumar, Anantharaman; Al-Tayar, Naef Ghallab Saeed; Gowda, Avinask K., E-mail: profpn58@yahoo.co [University of Mysore, Manasagangotri (India). Dept. of Studies in Chemistry

    2011-07-01

    highly sensitive spectrophotometric method for the analysis of catecholamine drugs; L-dopa and methyldopa, is described. The analysis is based on the reaction of drug molecules with vanadium (V) which is reduced to vanadium (IV) and form complex with eriochrome cyanine R to give products having maximum absorbance ({lambda}{sub max}) at 565 nm. Beer's law is obeyed in the range 0.028-0.84 and 0.099-0.996 {mu}g mL{sup -1} for L-dopa and methyldopa, respectively. The statistical analysis as well as comparison with reported methods demonstrated high precision and accuracy of the proposed method. The method was successfully applied in the analysis of pharmaceutical preparations. (author)

  6. Speciation of Chromium and Vanadium in Medicinal Plants ...

    African Journals Online (AJOL)

    In this study, Cr(VI) and V(V) were determined in medicinal plants collected from the farm located between two smelters. Chromium(VI) and vanadium(V) were leached from medicinal plants with 0.1 M Na2CO3 prior their determination by ETAAS. The concentration of Cr(VI) in medicinal plants varied between 3.1 ± 0.5 μg ...

  7. Optical properties of zinc–vanadium glasses doped with samarium ...

    Indian Academy of Sciences (India)

    Abstract. Zinc–vanadium glasses doped with samarium oxide having the chemical composition Sm2O3(x). ZnO(40−x)V2O5(60)(where x = 0·1–0·5 mol%) were prepared by melt quenching method. The density of these glasses was measured by Archimedes method; the corresponding molar volumes have also been ...

  8. Acute toxicity of vanadium to two species of freshwater fish

    Energy Technology Data Exchange (ETDEWEB)

    Knudtson, B.K.

    1979-09-01

    Goldfish (Carassius auratus) and guppies (Lebistes reticulatus) were the two freshwater, thermophilous fishes chosen for use in this study. These species were selected for the following reasons: (1) low cost/individual, (2) ready availability, (3) ease of care and handling, (4) suspected differences between the two species in their responses to this metal, and (5) the usefulness of both as generalized models for the response of freshwater and marine fishes to vanadium.

  9. Spleen and bone marrow megakaryocytes as targets for inhaled vanadium

    OpenAIRE

    Teresa I Fortoul; Piñón-Zarate, Gabriela; Diaz-Bech, María Eugenia; González-Villalva, Adriana; Mussali-Galante, Patricia; Rodriguez-Lara,Vilaney; Colin-Barenque, Laura; Martinez Pedraza, Michelle; Luis F. Montaño

    2008-01-01

    An increased incidence in ischemic and thromboembolic events in the population of cities with rising air suspended particle pollution has suggested the interaction of some of the components of these particles in the coagulation system. A previous report from our laboratory identified thrombocytosis as a consequence of the subacute and chronic inhalation of vanadium. With this preceding information we decided to evaluate the effects of this element in the spleen and bon...

  10. Bilaterally Microstructured Thin Polydimethylsiloxane Film Production

    DEFF Research Database (Denmark)

    Vudayagiri, Sindhu; Yu, Liyun; Hassouneh, Suzan Sager

    2015-01-01

    with the existing manufacturing process. In employing the new technique, films with microstructures on both surfaces are successfully made with two different liquid silicone rubber (LSR) formulations: 1) pure XLR630 and 2) XLR630 with titanium dioxide (TiO2). The LSR films (∼70 μm) are cast on a carrier web...

  11. Corrosion resistance investigation of vanadium alloys in liquid lithium

    Science.gov (United States)

    Borovitskaya, I. V.; Lyublinskiy, I. E.; Bondarenko, G. G.; Paramonova, V. V.; Korshunov, S. N.; Mansurova, A. N.; Lyakhovitskiy, M. M.; Zharkov, M. Yu.

    2016-12-01

    A major concern in using vanadium alloys for first wall/blanket systems in fusion reactors is their activity with regard to nonmetallic impurities in the coolants. This paper presents the results of studying the corrosion resistance in high-purity liquid lithium (with the nitrogen and carbon content of less than 10-3 wt %) of vanadium and vanadium alloys (V-1.86Ga, V-3.4Ga-0.62Si, V-4.81Ti-4.82Cr) both in the initial state and preliminarily irradiated with Ar+ ions with energy of 20 keV to a dose of 1022 m-2 at an irradiation temperature of 400°C. The degree of corrosion was estimated by measuring the changes in the weight and microhardness. Corrosion tests were carried out under static isothermal conditions at a temperature of 600°C for 400 h. The identity of corrosion mechanisms of materials both irradiated with Ar ions and not irradiated, which consisted in an insignificant penetration of nitrogen into the materials and a substantial escape of oxygen from the materials, causing the formation of a zone with a reduced microhardness near the surface, was established. The influence of the corrosive action of lithium on the surface morphology of the materials under study was found, resulting in the manifestation of grain boundaries and slip lines on the sample surface, the latter being most clearly observed in the case of preliminary irradiation with Ar ions.

  12. A combined theoretical-experimental study of interactions between vanadium ions and Nafion membrane in all-vanadium redox flow batteries

    Science.gov (United States)

    Intan, Nadia N.; Klyukin, Konstantin; Zimudzi, Tawanda J.; Hickner, Michael A.; Alexandrov, Vitaly

    2018-01-01

    Vanadium redox flow batteries (VRFBs) are a promising solution for large-scale energy storage, but a number of problems still impede the deployment of long-lifetime VRFBs. One important aspect of efficient operation of VRFBs is understanding interactions between vanadium species and the membrane. Herein, we investigate the interactions between all four vanadium cations and Nafion membrane by a combination of infrared (IR) spectroscopy and density-functional-theory (DFT)-based static and molecular dynamics simulations. It is observed that vanadium species primarily lead to changes in the IR spectrum of Nafion in the SO3- spectral region which is attributed to the interaction between vanadium species and the SO3- exchange sites. DFT calculations of vanadium -Nafion complexes in the gas phase show that it is thermodynamically favorable for all vanadium cations to bind to SO3- via a contact pair mechanism. Car-Parrinello molecular dynamics-based metadynamics simulations of cation-Nafion systems in aqueous solution suggest that V2+ and V3+ species coordinate spontaneously to SO3-, which is not the case for VO2+ and VO2+. The interaction behavior of the uncycled membrane determined in this study is used to explain the experimentally observed changes in the vibrational spectra, and is discussed in light of previous results on device-cycled membranes.

  13. The toxicity of vanadium on gastrointestinal, urinary and reproductive system, and its influence on fertility and fetuses malformations

    Directory of Open Access Journals (Sweden)

    Aleksandra Wilk

    2017-09-01

    Additionally, this research identifies the doses of vanadium which lead to pathological alterations becoming visible within tissues. Moreover, this study includes information about the protective efficacy of some substances in view of the toxicity of vanadium.

  14. Carbon dioxide detection with polyethylenimine blended with polyelectrolytes

    NARCIS (Netherlands)

    Doan, T.C.D.; Baggerman, J.; Ramaneti, R.; Tong, H.D.; Marcelis, A.T.M.; Rijn, van C.J.M.

    2014-01-01

    Branched polyethylenimine (PEI) is studied for use as a chemiresistor for detection of carbon dioxide(CO2) at room temperature. The DC and AC measurements of drop-coated PEI films on interdigitated electrodes revealed a noticeable decrease in conductivity upon exposure to CO2 (400–2000 ppm)

  15. RHEED study of titanium dioxide with pulsed laser deposition

    DEFF Research Database (Denmark)

    Rasmussen, Inge Lise; Pryds, Nini; Schou, Jørgen

    2009-01-01

    Reflection high-energy electron diffraction (RHEED) operated at high pressure has been used to monitor the growth of thin films of titanium dioxide (TiO2) on (1 0 0) magnesium oxide (MgO) substrates by pulsed laser deposition (PLD). The deposition is performed with a synthetic rutile TiO2 target...

  16. Preparation and Localization of a Monoclonal Antibody against a Vanadium-Associated Protein Extracted from the Blood Cells of the Vanadium-Rich Ascidian, Ascidia sydneiensis samea

    OpenAIRE

    Junko, Wuchiyama; Yasuhiro, Nose; Taro, Uyama; Hitoshi, Michibata; Mukaishima Marine Biological Laboratory, Faculty of Science and Laboratory of Marine Molecular Biology, Graduate School of Science, Hiroshima University

    1997-01-01

    Ascidians are known to accumulate high levels of vanadium in their blood cells, Recently, we found a vanadium-associated protein (VAP) in blood cells of a vanadium-rich ascidian, Ascidia sydneiensis samea. In this paper, we raised a monoclonal antibody against VAP, designated F8DH. Immunoblot analysis showed that F8DH recognized 2 related peptides of 15 kDa and 16 kDa of VAP. Using F8DH, VAP was shown to be in the cytoplasm of vanadocytes and compartment cells, both of which were reported to ...

  17. Recovery of Vanadium from H2SO4-HF Acidic Leaching Solution of Black Shale by Solvent Extraction and Precipitation

    OpenAIRE

    Xingbin Li; Chang Wei; Zhigan Deng; Cunxiong Li; Gang Fan; Minting Li; Hui Huang

    2016-01-01

    The recovery of vanadium from sulfuric and hydrofluoric mixed acid solutions generated by the direct leaching of black shale was investigated using solvent extraction and precipitation methods. The process consisted of reduction, solvent extraction, and stripping, followed by precipitation and calcination to yield vanadium pentoxide. The influence of various operating parameters on the extraction and recovery of vanadium was studied. Vanadium (IV) was selectively extracted using a mixture of ...

  18. The toxicity of vanadium on gastrointestinal, urinary and reproductive system, and its influence on fertility and fetuses malformations

    OpenAIRE

    Aleksandra Wilk; Dagmara Szypulska-Koziarska; Barbara Wiszniewska

    2017-01-01

    Vanadium is a transition metal that has a unique and beneficial effect on both humans and animals. For many years, studies have suggested that vanadium is an essential trace element. Its biological properties are of interest due to its therapeutic potential, including in the treatment of diabetes mellitus. Vanadium deficiencies can lead to a range of pathologies. However, excessive concentration of this metal can cause irreversible damage to various tissues and organs. Vanadium toxicity mainl...

  19. Assembly of a check-patterned CuS{sub x}–TiO{sub 2} film with an electron-rich pool and its application for the photoreduction of carbon dioxide to methane

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Homin; Kwak, Byeong Sub [Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 38541 (Korea, Republic of); Park, No-Kuk [School of Chemical Engineering, Yeungnam University, Gyeongsan, Gyeongbuk 38541 (Korea, Republic of); Baek, Jeom-In [KEPCO Research Institute, Korea Electric Power Corporation, 105 Munji-ro, Yuseong-gu, Daejeon 34056 (Korea, Republic of); Ryu, Ho-Jung [Korea Institute of Energy Research, 152 Gajeong-ro, Yuseong-gu, Daejeon 34129 (Korea, Republic of); Kang, Misook, E-mail: mskang@ynu.ac.kr [Department of Chemistry, College of Science, Yeungnam University, Gyeongsan, Gyeongbuk 38541 (Korea, Republic of)

    2017-01-30

    Highlights: • A new check-patterned CuS{sub x}–TiO{sub 2} film was prepared by the squeeze printing method. • Significantly increased amounts of CO{sub 2} were adsorbed on the CuS{sub x}–TiO{sub 2} film. • High amounts of CH{sub 4} (53.2 μmolg{sub cat}{sup −1} L{sup −1}) were produced over the CuS{sub x}–TiO{sub 2} film. • An electron-rich pool was supposedly formed at the boundary between TiO{sub 2} and CuS{sub x}. - Abstract: A new check-patterned CuS{sub x}–TiO{sub 2} film was designed to improve the photoreduction of CO{sub 2} to CH{sub 4}. The check-patterned CuS{sub x}–TiO{sub 2} film with a 3D-network microstructure was fabricated by a facile squeeze method. The as-synthesized TiO{sub 2} and CuS{sub x} powders, as well as the patterned film, were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), UV–visible spectroscopy, cyclic voltammetry (CV), and photoluminescence (PL) spectroscopy, as well as photocurrent density and CO{sub 2} temperature-programmed desorption (TPD) measurements. Compared to pure CuS{sub x} and TiO{sub 2}, the check-patterned CuS{sub x}–TiO{sub 2} film exhibited significantly increased adsorption of CO{sub 2} on its networked microstructure, attributed to the enlarged interfaces between the microparticles. The check-patterned CuS{sub x}–TiO{sub 2} film exhibited superior photocatalytic behavior, with 53.2 μmolg{sub cat}{sup −1} L{sup −1} of CH{sub 4} produced after 8 h of reaction, whereas 18.1 and 7.3 μmolg{sub cat}{sup −1} L{sup −1} of CH{sub 4} were produced from pure TiO{sub 2} and CuS{sub x} films under the same reaction conditions, respectively. A model for enhanced photoactivity over the check-patterned CuS{sub x} − TiO{sub 2} film was proposed. Results indicated that the check-patterned CuS–TiO{sub 2} material is quite promising as a photocatalyst for the reduction of CO{sub 2} to CH{sub 4}.

  20. Model investigations for vanadium-protein interactions: vanadium(III) compounds with dipeptides and their oxovanadium(IV) analogues.

    Science.gov (United States)

    Tasiopoulos, Anastasios J; Tolis, Evangelos J; Tsangaris, John M; Evangelou, Angelos; Woollins, DerekJ; Slawin, Alexandra M Z; Pessoa, Costa; Correia, Isabel; Kabanos, Themistoklis A

    2002-04-01

    The reaction of VCl(3) with 1,10-phenanthroline and a series of dipeptides (H(2)dip), having aliphatic as well as aromatic side chains, in methyl alcohol and in the presence of triethylamine affords vanadium(III) compounds of the general formula [V(III)(dip)(MeOH)(phen)]Cl. Aerial oxidation/hydrolysis of the vanadium(III) species gives their oxovanadium(IV) analogues of the general formula [V(IV)O(dip)(phen)]. X-ray crystallographic characterization of the [V(IV)O(dip)(phen)] compounds (where dip(2-)=Gly- L-Ala, Gly- L-Val and Gly- L-Phe) revealed that the vanadium atom possesses a severely distorted octahedral coordination and is ligated to a tridentate dip(2-) ligand at the N(amine) atom, the deprotonated N(peptide) atom and one of the O(carboxylate) atoms, as well as an oxo group and two phenanthroline nitrogen atoms. Circular dichroism characterization of the V(III)/V(IV)O(2+)-dipeptide compounds revealed a strong signal for the V(IV)O(2+) species in the visible range of the spectrum, with a characteristic pattern which may be exploited to identify the N(am), N(pep) and O(car) ligation of a peptide or a protein to V(IV)O(2+) center, and a weak Cotton effect of opposite sign to their vanadium(III) analogues. The visible spectra of the V(III)-dipeptide compounds revealed two d-d bands with high intensity, thus indicating that the covalency of the metal-donor atoms is significant, i.e. the vanadium d orbitals are significantly mixed with the ligand orbitals, and this is confirmed by the low values of their Racah B parameters. The high-intensity band of the V(IV)O(2+)-dipeptide compounds at approximately 460 nm implies also a strong covalency of the metal with the equatorial donor atoms and this was supported by the EPR spectra of these compounds. Moreover, the V(III)/V(IV)O(2+)-dipeptide complexes were characterized by EPR and IR spectroscopies as well as conductivity and magnetic susceptibility measurements.

  1. The rice field cyanobacteria Anabaena azotica and Anabaena sp. CH1 express vanadium-dependent nitrogenase

    NARCIS (Netherlands)

    Boison, G.; Steingen, C.; Stal, L.J.; Bothe, H.

    2006-01-01

    Anabaena azotica FACHB-118 and Anabaena sp. CH1, heterocystous cyanobacteria isolated from Chinese and Taiwanese rice fields, expressed vanadium-containing nitrogenase when under molybdenum deficiency. This is the second direct observation of an alternative nitrogenase in cyanobacteria. The vanadium

  2. Bioaccumulation of vanadium and other trace metals in livers of Alaskan cetaceans and pinnipeds.

    Science.gov (United States)

    Mackey, E A; Becker, P R; Demiralp, R; Greenberg, R R; Koster, B J; Wise, S A

    1996-05-01

    Concentrations for 38 elements are routinely measured in the marine mammal liver tissues archived in the National Biomonitoring Specimen Bank (NBSB). Results show that hepatic concentrations of vanadium, selenium, silver, cadmium, and mercury are positively correlated with age for beluga whales (Delphinapterus leucas) and of vanadium, selenium, cadmium, and mercury with length for ringed seals (Phoca hispada). Many researchers have reported linear correlations of hepatic selenium, cadmium, and mercury with marine mammal age; however, there is only one other report of a linear correlation of hepatic vanadium with marine mammal age. Vanadium levels are at or below detection limits (marine mammals from the NBSB but are present at levels ranging from 0.02 to 1.2 micrograms/g of wet weight in the tissues of Alaskan marine mammals. Although only three bearded seal (Eriganthus barbatus) and three bow-head whale (Balaena mysticetus) liver samples have been analyzed, hepatic vanadium levels also increased with animal size for these species. The presence of relatively high levels of vanadium in the livers of these Alaskan animals may reflect a unique dietary source of vanadium, a unique geochemical source of vanadium, or anthropogenic input to the Alaskan marine environment.

  3. Vanadium Mining and Cattle Health : Sentinel studies, epidemiological and veterinary public health issues

    NARCIS (Netherlands)

    Gummow, B.

    2005-01-01

    The thesis covers a field outbreak investigation into the cause and pathogenesis of "illthrift" on a dairy farm that was due to vanadium exposure, it examines methods of treating vanadium poisoning in cattle using an experimental study, looks at the use of cattle as sentinels for detecting and

  4. Anthropogenic vanadium emissions to air and ambient air concentrations in North-West Europe

    NARCIS (Netherlands)

    Visschedijk, A.H.J.; Denier van der Gon, H.A.C.; Hulskotte, J.H.J.; Quass, U.

    2013-01-01

    An inventory of Vanadium emissions for North-West Europe for the year 2005 was made based on an identification of the major sources. The inventory covers Belgium, Germany, Denmark, France, United Kingdom, Luxembourg, Netherlands and the OSPAR region of the North Sea. Vanadium emission were

  5. Determination of Vanadium Binding Mode on Seawater-Contacted Polyamidoxime Adsorbents

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhicheng [Lawrence Berkeley National Laboratory (LBNL); Rao, Linfeng [Lawrence Berkeley National Laboratory (LBNL); Abney, Carter W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bryantsev, Vyacheslav [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ivanov, Aleksandr [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    Adsorbents developed for the recovery of uranium from seawater display poor selectivity over other transition metals present in the ocean, with vanadium particularly problematic. To improve selectivity, an indispensable step is the positive identification of metal binding environments following actual seawater deployment. In this work we apply x-ray absorption fine structure (XAFS) spectroscopy to directly investigate the vanadium binding environment on seawater-deployed polyamidoxime adsorbents. Comparison of the x-ray absorption near edge spectra (XANES) reveal marked similarities to recently a reported non-oxido vanadium (V) structure formed upon binding with cyclic imidedioxime, a byproduct of generating amidoxime functionalities. Density functional theory (DFT) calculations provided a series of putative vanadium binding environments for both vanadium (IV) and vanadium (V) oxidation states, and with both amidoxime and cyclic imidedioxime. Fits of the extended XAFS (EXAFS) data confirmed vanadium (V) is bound exclusively by the cyclic imidedioxime moiety in a 1:2 metal:ligand fashion, though a modest structural distortion is also observed compared to crystal structure data and computationally optimized geometries which is attributed to morphology effects from the polymer graft chain and the absence of crystal packing interactions. These results demonstrate that improved selectivity for uranium over vanadium can be achieved by suppressing the formation of cyclic imidedioxime during preparation of polyamidoxime adsorbents for seawater uranium recovery.

  6. Synthesis of nanoparticles of vanadium carbide in the ferrite of nodular cast iron

    CERN Document Server

    Fras, E; Guzik, E; Lopez, H

    2005-01-01

    The synthesis method of nanoparticles of vanadium carbide in nodular cast iron is presented. After introduction of this method, the nanoparticles with 10-70 nm of diameter was obtained in the ferrite. The diffraction investigations confirmed that these particles are vanadium carbides of type V/sub 3/C/sub 4/.

  7. The public health implications of farming cattle in areas with high background concentrations of vanadium

    NARCIS (Netherlands)

    Gummow, B.; Botha, C.J.; Noordhuizen, J.P.T.M.; Heesterbeek, J.A.P.

    2005-01-01

    Forty-two adult Brahman-cross cattle farmed extensively in two groups, immediately adjacent to and 2 km from a vanadium processing plant respectively, were slaughtered over a 5 year period at a nearby abattoir. Cattle were being exposed to vanadium at close to no-adverse-effect levels. The dose of

  8. Improved performance of organic light-emitting diode with vanadium pentoxide layer on the FTO surface

    Science.gov (United States)

    Saikia, D.; Sarma, R.

    2017-06-01

    Vanadium pentoxide layer deposited on the fluorine-doped tin oxide (FTO) anode by vacuum deposition has been investigated in organic light-emitting diode (OLED). With 12 nm optimal thickness of V2O5, the luminance efficiency is increased by 1.66 times compared to the single FTO-based OLED. The improvement of current efficiency implies that there is a better charge injection and better controlling of hole current. To investigate the performance of OLED by the buffer layer, V2O5 films of different thicknesses were deposited on the FTO anode and their J- V and L- V characteristics were studied. Further analysis was carried out by measuring sheet resistance, optical transmittance and surface morphology with the FE-SEM images. This result indicates that the V2O5 (12 nm) buffer layer is a good choice for increasing the efficiency of FTO-based OLED devices within the tunnelling region. Here the maximum value of current efficiency is found to be 2.83 cd / A.

  9. The Influence of Vanadium on Ferrite and Bainite Formation in a Medium Carbon Steel

    Science.gov (United States)

    Sourmail, T.; Garcia-Mateo, C.; Caballero, F. G.; Cazottes, S.; Epicier, T.; Danoix, F.; Milbourn, D.

    2017-09-01

    The influence of vanadium additions on transformation kinetics has been investigated in a medium carbon forging steel. Using dilatometry to track transformation during continuous cooling or isothermal transformation, the impact of vanadium on both ferrite-pearlite and bainite has been quantified. Transmission electron microscopy and atom probe tomography have been used to establish whether vanadium was present in solid solution, or as clusters and precipitates. The results show that vanadium in solid solution has a pronounced retarding influence on ferrite-pearlite formation and that, unlike in the case of niobium, this effect can be exploited even during relatively slow cooling. The influence on bainite transformation was found to depend on temperature; an explanation in terms of the effect of vanadium on heterogeneous nucleation is tentatively proposed.

  10. Growth of anatase titanium dioxide nanotubes via anodization

    Directory of Open Access Journals (Sweden)

    Ed Adrian Dilla

    2012-06-01

    Full Text Available In this work, titanium dioxide nanotubes were grown via anodization of sputtered titanium thin films using different anodization parameters in order to formulate a method of producing long anatase titanium dioxide nanotubes intended for solar cell applications. The morphological features of the nanotubes grown via anodization were explored using a Philips XL30 Field Emission Scanning Electron Microscope. Furthermore, the grown nanotubes were also subjected to X-ray diffraction and Raman spectroscopy in order to investigate the effect of the predominant crystal orientation of the parent titanium thin film on the crystal phase of the nanotubes. After optimizing the anodization parameters, nanotubes with anatase TiO2 crystal phase and tube length more than 2 microns was produced from parent titanium thin films with predominant Ti(010 crystal orientation and using ammonium fluoride in ethylene glycol as an electrolyte with a working voltage equal to 60V during 1-hour anodization runs.

  11. The role of vanadium in the chemical defense of the solitary tunicate, Phallusia nigra.

    Science.gov (United States)

    Odate, Shobu; Pawlik, Joseph R

    2007-03-01

    Ascidians (sea squirts) may defend themselves from predators, biofouling competitors, and bacterial infection by producing secondary metabolites or sequestering acid, but many species also accumulate heavy metals, most notably vanadium. The defensive functions of heavy metals in ascidians remain unclear, and to this end, the solitary Caribbean tunicate, Phallusia nigra, was studied to localize vanadium in its tissues and to assess the defensive properties of vanadium-containing compounds. As determined by flame atomic absorption spectroscopy, the internal tissues and blood contained the highest vanadium concentrations (mean values of 2280 and 1886 ppm dry mass, respectively), followed by the tunic surface (871 ppm dry mass). Results of laboratory feeding assays with the bluehead wrasse, Thalassoma bifasciatum, confirmed outcomes of past studies that demonstrated that vanadyl sulfate (VOSO4.6H20) and sodium vanadate (Na3VO4) were unpalatable to fish, although these salts do not accurately reflect the chelation environment or oxidation state of vanadium in living tunicates. Fresh preparations of whole tunic, internal tissues, and blood were unpalatable to fish, but freezing and thawing of internal tissues and blood rendered them palatable. Crude organic extracts of whole tunic and internal tissues contained vanadium metabolites (225 and 750 ppm dry mass, respectively) and were palatable to T. bifasciatum; crude extracts also exhibited no antimicrobial effects against a panel of four marine bacteria known to be pathogens of marine invertebrates (Vibrio parahaemolyticus, Vibrio harveyi, Leucothrix mucor, and Deleya marina). Nonacidic vanadium (+3) complexes neither deterred predation nor inhibited microbial growth, whereas acidic aqua vanadium (+3 and +4) complexes were unpalatable to 7 bifasciatum and exhibited antimicrobial activity. Difficulties in decoupling low pH from oxidation state and chelation environment of vanadium prevent definitive conclusions about the

  12. Effect of vanadium contamination on the framework and micropore structure of ultra stable Y-zeolite.

    Science.gov (United States)

    Etim, U J; Xu, B; Ullah, Rooh; Yan, Z

    2016-02-01

    Y-zeolites are the main component of fluid catalytic cracking (FCC) catalyst for conversion of crude petroleum to products of high demand including transportation fuel. We investigated effects of vanadium which is present as one of the impurities in FCC feedstock on the framework and micropore structure of ultra-stable (US) Y-zeolite. The zeolite samples were prepared and characterized using standard techniques including: (1) X-ray diffraction, (2) N2 adsorption employing non local density functional theory method, NLDFT, (3) Transmittance and Pyridine FTIR, (4) Transmittance electron microscopy (TEM), and (5) (27)Al and (29)Si MAS-NMR. Results revealed that in the presence of steam, vanadium caused excessive evolution of non inter-crystalline mesopores and structural damage. The evolved mesopore size averaged about 25.0nm at 0.5wt.% vanadium loading, far larger than mesopore size in zeolitic materials with improved hydrothermal stability and performance for FCC catalyst. A mechanism of mesopore formation based on accelerated dealumination has been proposed and discussed. Vanadium immobilization experiments conducted to mitigate vanadium migration into the framework clearly showed vanadium is mobile at reaction conditions. From the results, interaction of vanadium with the passivator limits and decreases mobility and activity of vanadium into inner cavities of the zeolite capable of causing huge structure breakdown and acid sites destruction. This study therefore deepens insight into the causes of alteration in activity and selectivity of vanadium contaminated catalyst and hints on a possible mechanism of passivation in vanadium passivated FCC catalyst. Copyright © 2015 Elsevier Inc. All rights reserved.

  13. Studies of reactor irradiation effect on hydrogen isotope release from vanadium alloy V4Cr4Ti

    Energy Technology Data Exchange (ETDEWEB)

    Kulsartov, T. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Shestakov, V. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Chikhray, Y. [Kazakhstan State University, Tole-bi-str. 96a., Almaty (Kazakhstan); Kenzhin, Y. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Kolbayenkov, A. [Institute of Atomic Energy NNC RK, Krasnoarmeyskaya-str. 10, Kurchatov (Kazakhstan); Tazhibayeva, I. [National Nuclear Center, Lenin-str. 6, Kurchatov (Kazakhstan)

    2007-08-01

    Vanadium alloys are most promising materials being considered for lithium blanket-breeder in future fusion reactors. The primary reason for these stems from good combination of physical-mechanical and radiation properties of vanadium alloys. In operational conditions of fusion reactors the very important issue is behavior of vanadium alloy with respect to hydrogen isotopes under neutron and gamma irradiation. This paper shows results of the experimental studies of reactor irradiation influence on parameters of hydrogen release from vanadium alloys. Experiments were carried out for various levels of reactor irradiation and showed the effect of irradiation on parameters of hydrogen release from vanadium alloy V4Cr4Ti.

  14. Corrosion resistance investigation of vanadium alloys in liquid lithium

    Energy Technology Data Exchange (ETDEWEB)

    Borovitskaya, I. V., E-mail: symp@imet.ac.ru [Russian Academy of Sciences, Baikov Institute of Metallurgy and Materials Science (Russian Federation); Lyublinskiy, I. E. [JSC Red Star (Russian Federation); Bondarenko, G. G. [National Research University Higher School of Economics (Russian Federation); Paramonova, V. V. [Russian Academy of Sciences, Baikov Institute of Metallurgy and Materials Science (Russian Federation); Korshunov, S. N.; Mansurova, A. N. [National Research Center Kurchatov Institute (Russian Federation); Lyakhovitskiy, M. M. [Russian Academy of Sciences, Baikov Institute of Metallurgy and Materials Science (Russian Federation); Zharkov, M. Yu. [JSC Red Star (Russian Federation)

    2016-12-15

    A major concern in using vanadium alloys for first wall/blanket systems in fusion reactors is their activity with regard to nonmetallic impurities in the coolants. This paper presents the results of studying the corrosion resistance in high-purity liquid lithium (with the nitrogen and carbon content of less than 10{sup –3} wt %) of vanadium and vanadium alloys (V–1.86Ga, V–3.4Ga–0.62Si, V–4.81Ti–4.82Cr) both in the initial state and preliminarily irradiated with Ar+ ions with energy of 20 keV to a dose of 10{sup 22} m{sup –2} at an irradiation temperature of ~400°C. The degree of corrosion was estimated by measuring the changes in the weight and microhardness. Corrosion tests were carried out under static isothermal conditions at a temperature of 600°C for 400 h. The identity of corrosion mechanisms of materials both irradiated with Ar ions and not irradiated, which consisted in an insignificant penetration of nitrogen into the materials and a substantial escape of oxygen from the materials, causing the formation of a zone with a reduced microhardness near the surface, was established. The influence of the corrosive action of lithium on the surface morphology of the materials under study was found, resulting in the manifestation of grain boundaries and slip lines on the sample surface, the latter being most clearly observed in the case of preliminary irradiation with Ar ions.

  15. Development of analytical techniques of vanadium isotope in seawater

    Science.gov (United States)

    Huang, T.; Owens, J. D.; Sarafian, A.; Sen, I. S.; Huang, K. F.; Blusztajn, J.; Nielsen, S.

    2015-12-01

    Vanadium (V) is a transition metal with isotopes of 50V and 51V, and oxidation states of +2, +3, +4 and +5. The average concentration in seawater is 1.9 ppb, which results in a marine residence time of ~50 kyrs. Its various oxidation states make it a potential tool for investigating redox conditions in the ocean and sediments due to redox related changes in the valance state of vanadium. In turn, chemical equilibrium between different oxidation states of V will likely cause isotopic fractionation that can potentially be utilized to quantify past ocean redox states. In order to apply V isotopes as a paleo-redox tracer, it is required that we know the isotopic composition of seawater and the relation to marine sources and sinks of V. We developed a novel method for pre-concentrating V and measuring the isotope ratio in seawater samples. In our method, we used four ion exchange chromatography columns to separate vanadium from seawater matrix elements, in particular titanium and chromium, which both have an isobaric interference on 50V. The first column uses the NOBIAS resin, which effectively separates V and other transition metals from the majority of seawater matrix. Subsequent columns are identical to those utilized when separating V from silicate samples (Nielsen et al, Geostand. Geoanal. Res., 2011). The isotopic composition of the purified V is measured using a Thermo Scientific Neptune multiple collector inductively coupled plasma mass spectrometer (MC-ICP-MS) in medium resolution mode. This setup resolves all molecular interferences from masses 49, 50, 51, 52 and 53 including S-O species on mass 50. To test the new method, we spiked an open ocean seawater sample from the Bermuda Atlantic Time Series (BATS) station with 10-25 μg of Alfa Aesar vanadium solution, which has an isotopic composition of δ51V = 0 [where δ51V = 1000 × [(51V/50Vsample - 51V/50VAA)/51V/50VAA]. The average of six spiked samples is -0.03±0.19‰, which is within error of the true

  16. Iron(II)- or vanadium(IV)-containing siliceous gels

    OpenAIRE

    Hutter, Frank; Schmidt, Helmut K.; Scholze, Horst

    1986-01-01

    Iron(II)-containing SiO2 gels can be prepared by the hydrolysis and condensation of tetramethoxysilane in methanolic solutions of iron(II) chloride. These gels show an absorption at 1000 nm indicating the presence of iron(II). In opposition to that, iron(II) cannot be introduced into organically modified gels of the 3-glycidyloxypropyltrimethoxysilane type. Vanadium(IV) can be incorporated into both gels. Unlike the SiO2 gels, the organically modified gels are compact and elastic. The spectra...

  17. Medium carbon vanadium micro alloyed steels for drop forging

    Energy Technology Data Exchange (ETDEWEB)

    Jeszensky, Gabor; Plaut, Ronald Lesley

    1992-12-31

    Growing competitiveness of alternative manufacturing routes requires cost minimization in the production of drop forged components. The authors analyse the potential of medium carbon, vanadium microalloyed steels for drop forging. Laboratory and industrial experiments have been carried out emphasizing deformation and temperature cycles, strain rates and dwell times showing a typical processing path, associated mechanical properties and corresponding microstructures. The steels the required levels of mechanical properties on cooling after forging, eliminating subsequent heat treatment. The machinability of V-microalloyed steels is also improved when compared with plain medium carbon steels. (author) 17 refs., 19 figs., 5 tabs.

  18. Growth of Vanadium Carbide by Halide-Activated Pack Diffusion

    DEFF Research Database (Denmark)

    Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Dahl, Kristian Vinter

    The present work investigates growth of vanadium carbide (VC) layers by the pack diffusion method on a Vanadis 6 tool steel. The VC layers were produced by pack diffusion at 1000°C for 1, 4 and 16 hours. The VC layers were characterized with optical and electron microscopy, Vickers hardness tests...... and X-ray diffraction. Homogeneous VC mono-phase layers with Vickers hardness of more than 2400 HV were obtained. Hardening and tempering of the vanadized Vanadis 6 steel did not affect the VC layers....

  19. Atomistic modeling of the anomalous helium behaviors in vanadium

    OpenAIRE

    Hu, Nengwen; Wang, Canglong; Deng, Huiqiu; Xiao, Shifang; Wang, Chengbin; Yang, Lei; Hu, Wangyu

    2016-01-01

    Ab initio calculations have been performed to clarify the primary behaviors of He atoms in vanadium and to generate the database for the development of the interatomic potential for V-He system within the framework of the"s-band"model.The calculated formation energies of the tetrahedral,octahedral and substitutional He defects,as well as those for He2,He3 and He2V clusters are reasonable when compared with relevant experimental results and ab initio calculations under the same conditions.The ...

  20. Pentavalent vanadium at concentration of the underground water level enhances the sweet taste sense to glucose in college students.

    Science.gov (United States)

    Nagai, Masanori; Saitoh, Junko; Ohno, Hiromi; Hitomi, Chiaki; Wada, Maki

    2006-02-01

    Underground water in volcanic areas contains vanadium when the basalt layer exists among igneous rocks. The concentration of vanadium in drinking water sometimes exceeds 0.8 microM in these areas, however, the physiological effects of vanadium, especially non-toxic effects, at concentrations lower than 1 microM are unknown. In the present experiments, we examined the effect of pentavalent vanadium and tetravalent vanadium at 0.8 and 8.0 microM concentrations on the recognition threshold to taste substances in healthy college students. Pentavalent vanadium, ammonium vanadate, lowered the sweet taste threshold to glucose at 0.8 and 8.0 microM as well. Tetravalent vanadium, vanadium sulfate, did not alter the threshold to glucose either at 8.0 microM or at 0.8 microM. Ammonium vanadate also decreased the sweet taste threshold to L-proline at 8.0 microM. Ammonium vanadate did not influence the sour taste threshold to hydrogen chloride. Neither ammonium sulfate nor ammonium bicarbonate altered the sweet taste threshold to glucose. Therefore, the effect of ammonium vanadate on the sweet taste threshold is attained by vanadium but not by ammonium. It was concluded that pentavalent vanadium at 0.8 microM intensifies the sweet taste sense to glucose rather specifically. We have first shown the physiological effect of vanadium at the concentration of the underground water level.

  1. Glucose-6-Phosphate Dehydrogenase in the Pentose Phosphate Pathway Is Localized in Vanadocytes of the Vanadium-Rich Ascidian, Ascidia sydneiensis samea

    OpenAIRE

    Taro, Uyama; Kazuhiro, YAMAMOTO; Kan, Kanamori; Hitoshi, Michibata; Department of Chemistry, Toyama University; Mukaishima Marine Biological Laboratory, Faculty of Science and Laboratory of Marine Molecular Biology, Graduate School of Science, Hiroshima University

    1998-01-01

    Ascidians are sessile marine animals known to accumulate high levels of vanadium selectively in vanadium-containing blood cells(vanadocytes). Almost all the vanadium accumulated in the vacuoles of vanadocytes is reduced to the +3 oxidation state via the +4 oxidation state, although vanadium is dissolved in the +5 oxidation state in sea water. Some of the reducing agents that participate in the reduction have been proposed. By chemical study, vanadium in the +5 oxidation state was reported to ...

  2. Effects of vanadium on population growth and Na-K-ATPase activity of the brackish water hydroid Cordylophora caspia

    Energy Technology Data Exchange (ETDEWEB)

    Ringelband, U.; Karbe, L. [Institut fuer Hydrobiologie und Fischereiwissenschaft, Hamburg (Germany)

    1996-07-01

    Vanadium, a relatively abundant heavy metal, enters the environment naturally through rock weathering. A large fraction of vanadium input is of human origin. The combustion of petroleum- and coal-products, which contain relatively high concentrations of vanadium, is one of the most important sources of the enrichment of vanadium in the environment. As it is used as an alloy, and vanadium rich iron-ores of various origin are used in steel production, the residual slag-stones of the steel industry can contain considerable vanadium concentrations. Wherever slag-stones serve as a cheap and convenient material in riverbank reinforcement, vanadium can leach into the aquatic environment. Vanadium is regarded as an essential trace element for higher animals. Cantley et al. indicated a regulatory function of vanadate in vivo. Although considerable information is available on the toxic effects of vanadium on humans, very little is known about the toxicity of vanadium towards aquatic organisms, especially invertebrates. Bell and Sargent have shown an inhibition of Na-K-ATPase activity in gills of the eel Anguilla anguilla. Holleland and Towle have demonstrated the inhibition of Na-K-ATPase activity in the gills of the shore crab Carcinus maenas. The aim of this study was to determine the toxicity of vanadium towards the brackish water hydroid Cordylophora caspia. Hydroids are known to be particularly sensitive to heavy metals and their asexual reproduction can be used in a well-established population growth test. Furthermore, the effects of vanadium on Na-K-ATPase activity in hydroids were studied in in vivo experiments, wherein the animals were exposed to sublethal concentrations of vanadium. In addition, the inhibition of Na-K-ATPase was measured in vitro, by adding vanadium to a microsomal preparation. 16 refs., 4 figs.

  3. Selective extraction of vanadium from the APV-precipitated waste water

    Science.gov (United States)

    Li, Cui; Li, Hong-Yi; Tu, Chun-Bin; Zhang, Tao; Fang, Hai-Xing; Xie, Bing

    In the process of precipitating ammonium polyvanadate (APV) to produce vanadium pentoxide in Pan-steel in China, rest waste water usually contains about 24 333mg/L V(V), 2 100g/L Cr(VI),20 500mg/L Si(IV) and 20 100g/L Na2SO4. In order to recover valuable and also toxic metal ions contained in the waste water, effective extraction method of using anion exchange resin was realized to extract Vanadium selectively, leading to effective separation between vanadium and chromium. To ensure vanadium was absorbed by the resin, V(V) and Cr(VI) were reduced to V(IV) and Cr(III) by NaHSO3, respectively, and then V(IV) was oxidized by H2O2 to V(V) anions. Effects of temperature, solution pH, concentration of ions and absorbing time on vanadium absorption rate were investigated. Chromium was precipitated from rest solution while vanadium was eluted from resin by NaOH solution and then precipitated. Results showed that vanadium recovery of 73% could be obtained in optimized condition. The resin could be regenerated by 3% hydrochloric acid, which indicated the recyclability of the resin and thus low cost of this established method.

  4. Directed synthesis of bio-inorganic vanadium oxide composites using genetically modified filamentous phage

    Science.gov (United States)

    Mueller, Michael; Baik, Seungyun; Jeon, Hojeong; Kim, Yuchan; Kim, Jungtae; Kim, Young Jun

    2015-05-01

    The growth of crystalline vanadium oxide using a filamentous bacteriophage template was investigated using sequential incubation in a V2O5 precursor. Using the genetic modification of the bacteriophage, we displayed two cysteines that constrained the RSTB-1 peptide on the major coat protein P8, resulting in vanadium oxide crystallization. The phage-driven vanadium oxide crystals with different topologies, microstructures, photodegradation and vanadium oxide composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), quartz microbalance and dissipation (QCM-D) and X-ray photoelectron spectroscopy (XPS). Non-specific electrostatic attraction between a wild-type phage (wt-phage) and vanadium cations in the V2O5 precursor caused phage agglomeration and fiber formation along the length of the viral scaffold. As a result, the addition of recombinant phage (re-phage) in V2O5 precursors formed heterogeneous structures, which led to efficient condensation of vanadium oxide crystal formation in lines, shown by QCM-D analysis. Furthermore, re-phage/VxOx composites showed significantly enhanced photodegradation activities compared with the synthesized wt-phage-V2O5 composite under illumination. This study demonstrates that peptide-mediated vanadium oxide mineralization is governed by a complicated interplay of peptide sequence, local structure, kinetics and the presence of a mineralizing aid, such as the two cysteine-constrained peptides on the phage surface, and has potential for use in nanotechnology applications.

  5. Processing, characterization, and bactericidal activity of undoped and silver-doped vanadium oxides

    Energy Technology Data Exchange (ETDEWEB)

    Tousley, M.E.; Wren, A.W.; Towler, M.R. [Inamori School of Engineering, Alfred University, Alfred, NY 14803 (United States); Mellott, N.P., E-mail: mellott@alfred.edu [Inamori School of Engineering, Alfred University, Alfred, NY 14803 (United States)

    2012-12-14

    Vanadium oxide (V) and silver-doped vanadium oxide (Ag-V) powders were prepared via sol-gel processing. Structural evolution and bactericidal activity was examined as a function of temperature ranging from 250, 350, 450 and 550 Degree-Sign C. Powders were characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and Raman spectroscopy. Results from all techniques showed vanadium pentoxide (V{sub 2}O{sub 5}) is the predominant phase regardless of heat treatment temperature or the addition of silver (Ag). XRD analysis suggests Ag is present as AgCl in samples heat treated to 250, 350, and 450 Degree-Sign C and as AgV{sub 6}O{sub 15} at 550 Degree-Sign C. Bactericidal activity was evaluated against Escherichia coli using the agar disk diffusion method considering both Ag-V and undoped, V powders. While the addition of Ag significantly increased bactericidal properties, the specific Ag valency, or crystal structure and morphology formed at higher temperatures, had little effect on functionality. -- Highlights: Black-Right-Pointing-Pointer Vanadium and silver-doped vanadium oxide powders were prepared via sol-gel. Black-Right-Pointing-Pointer Powders were characterized using advanced, complementary structural techniques. Black-Right-Pointing-Pointer Bactericidal activity was evaluated against E. coli. Black-Right-Pointing-Pointer Both vanadium and silver doped vanadium oxide show bactericidal activity.

  6. Flexible substrates as basis for photocatalytic reduction of carbon dioxide

    DEFF Research Database (Denmark)

    Jensen, Jacob; Mikkelsen, Mette; Krebs, Frederik C

    2011-01-01

    A photocatalytic system for converting carbon dioxide into carbon monoxide was designed and constructed. The system relies on thin films of the photocatalyst prepared at low temperature using spray coating. We formulated inks based on the well-known photocatalyst titanium dioxide and characterized...... the performance in this setting. Glass substrates were used for model studies with an active area of 100cm2 and flexible substrates based on polyethyleneterphthalate (PET), polyethylenenaphtalate (PEN) and polyethylene (PE) with a similar area for prototypes of photocatalytic converters. The results from this new...

  7. Titanium dioxide-coated nanofibers for advanced filters

    Science.gov (United States)

    Lee, Byung-Yong; Behler, Kris; Kurtoglu, Murat Erdem; Wynosky-Dolfi, Meghan Ann; Rest, Richard F.; Gogotsi, Yury

    2010-09-01

    This article reports on titanium dioxide (TiO2)-coated nanofibers deposited on a filter surface by the electrospinning process. After depositing a micrometer-thick film of polyamide 11 nanofibers on polypropylene fabric, TiO2 nanoparticles can be directly electrosprayed onto the nanofibers. X-ray diffraction and Raman spectroscopy showed minimal change in the phase composition (anatase and rutile) and no change in the particle size of nanocrystalline TiO2 after coating. Scanning electron microscopy demonstrated that nanofibers were uniformly coated by titanium dioxide nanoparticles without agglomeration. TiO2-coated filters showed excellent photocatalytic-bactericidal activity and photo-induced hydrophilicity.

  8. Modification of halogen specificity of a vanadium-dependent bromoperoxidase.

    Science.gov (United States)

    Ohshiro, Takashi; Littlechild, Jennifer; Garcia-Rodriguez, Esther; Isupov, Michail N; Iida, Yasuaki; Kobayashi, Takushi; Izumi, Yoshikazu

    2004-06-01

    The halide specificity of vanadium-dependent bromoperoxidase (BPO) from the marine algae, Corallina pilulifera, has been changed by a single amino acid substitution. The residue R397 has been substituted by the other 19 amino acids. The mutant enzymes R397W and R397F showed significant chloroperoxidase (CPO) activity as well as BPO activity. These mutant enzymes were purified and their properties were investigated. The maximal velocities of CPO activities of the R397W and R397F enzymes were 31.2 and 39.2 units/mg, and the K(m) values for Cl(-) were 780 mM and 670 mM, respectively. Unlike the native enzyme, both mutant enzymes were inhibited by NaN(3). In the case of the R397W enzyme, the incorporation rate of vanadate into the active site was low, compared with the R397F and the wild-type enzyme. These results supported the existence of a specific halogen binding site within the catalytic cleft of vanadium haloperoxidases.

  9. Study of propane partial oxidation on vanadium-containing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Komashko, G.A.; Khalamejda, S.V.; Zazhigalov, V.A. [AN Ukrainskoj SSR, Kiev (Ukraine). Inst. Fizicheskoj Khimii

    1998-12-31

    The present results indicate that maximum selectivity to acrylic acid can be reached over V-P-Zr-O catalysts. When the hydrocarbon concentration is 5.1 vol.% the selectivity is about 30% at quite high paraffin conversion. Conclusively, some explanations to the observed facts can be given. The V-P-O catalyst promotion with lanthanum by means of mechanochemical treatment is distinguished by the additive uniform spreading all over the matrix surface. Such twophase system is highly active in propane conversion (lanthanum oxide) and further oxidation of the desired products. The similar properties are attributed to V-P-Bi-La-O catalyst. Bismuth, tellurium and zirconium additives having clearly defined acidic properties provoke the surface acidity strengthening and make easier desorption of the acidic product (acrylic acid) from the surface lowering its further oxidation. Additionally, since bismuth and zirconium are able to form phosphates and, according to, to create space limitations for the paraffin molecule movement out of the active group boundaries, this can be one more support in favour of the selectivity increase. With this point of view very interesting results were obtained. It has been shown that the more limited the size of the vanadium unit, the higher the selectivity is. Monoclinic phase AV{sub 2}P{sub 2}O{sub 10} which consists in clusters of four vanadium atoms is sensibly more reactive than the orthorhombic phase consists in V{sub {infinity}} infinite chains. (orig.)

  10. Preparation, characterization, and electrochemical properties of lithium vanadium oxide nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Zhuo Shujuan [Institute of Functional Nano and Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou, Jiangsu 215123 (China); Anhui Key Laboratory of Functional Molecular Solids, College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000 (China); Shao Mingwang, E-mail: mwshao@suda.edu.cn [Institute of Functional Nano and Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou, Jiangsu 215123 (China); Zhou Qing; Liao Fan [Institute of Functional Nano and Soft Materials (FUNSOM) and Jiangsu Key Laboratory for Carbon-Based Functional Materials and Devices, Soochow University, Suzhou, Jiangsu 215123 (China)

    2011-07-15

    Graphical abstract: Display Omitted Highlights: > The lithium ions can easily move between the layers of lithium vanadium oxide. > It can highly increase the electron transfer between the electrode and dopamine. > The reversibility of electrochemical process was significantly improved. - Abstract: Highly uniform lithium vanadium oxide nanoribbons were successfully prepared in large quantities using a facile hydrothermal approach without employing any surfactants or templates. The as-prepared products were up to hundreds of micrometers in length, about 200 nm in width, and 20 nm in thickness. These nanoribbons and nafion composite were employed to modify glassy carbon electrode, which displayed excellent electrochemical sensitivity and rapid response in detecting dopamine in phosphate buffer solution. Lithium ions can greatly increase the electron transfer between the electrode and biological materials, and significantly increase the reversibility of electrochemical process. A linear relationship between the concentrations of dopamine and its oxidation peak currents was obtained. The linear range for the detection of dopamine was 2.0 x 10{sup -6} to 1.0 x 10{sup -4} M with a detection limit of 1.0 x 10{sup -7} M. In addition, the good reproducibility and long-term stability of the sensor make it valuable for further application.

  11. Kinetic spectrophotometric determination of trace amounts of selenium and vanadium

    Energy Technology Data Exchange (ETDEWEB)

    Safavi, A.; Sedghy, H.R.; Shams, E. [Dept. of Chemistry, Shiraz Univ. (Iran)

    1999-11-01

    A sensitive kinetic spectrophotometric method has been developed for the determination of Se(IV) over the range of 45 to 4000 ng in 10 mL of solution. The method is based on the catalytic effect of Se(IV) on the reduction reaction of bromate by hydrazinium dichloride, with subsequent reaction of Ponceau S with products of the above reaction (chlorine and bromine), causing color changing of Ponceau S. Method development includes optimization of time interval for measurement of slope, pH, reagents concentration, and temperature. The optimized conditions yielded a theoretical detection limit of 33 ng/10 mL of solution of Se(IV). The interfering effects were studied and removed. The method was applied to the determination of selenium in spiked water, Kjeldahl tablet, selenium tablet, and shampoo. Vanadium(V) has an inhibition effect on the catalyzed reaction of bromate and hydrazine by selenium. Using this effect, V(V) can be determined in the range of 70 to 2500 ng in 10 mL of solution. The optimization procedure includes pH and selenium concentration. An extraction method was used for interference removal. The method was applied to the determination of vanadium in petroleum. (orig.)

  12. Synthesis and electrochemical performance of bismuth-vanadium oxyfluoride

    Energy Technology Data Exchange (ETDEWEB)

    Liu Li [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, School of Chemistry, Xiangtan University, Hunan, Xiangtan 411105 (China); Wang Xianyou, E-mail: wxianyou@yahoo.com [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, School of Chemistry, Xiangtan University, Hunan, Xiangtan 411105 (China); Wang Xingyan; Wang Xin; Tian Fanghua; Yi Lanhua [Key Laboratory of Environmentally Friendly Chemistry and Applications of Ministry of Education, School of Chemistry, Xiangtan University, Hunan, Xiangtan 411105 (China)

    2011-09-01

    Highlights: > Bi{sub 2}VO{sub 5}F has been prepared by solid-state method. > The electrochemical behaviors of Bi{sub 2}VO{sub 5}F have been studied. > Bi{sub 2}VO{sub 5}F prepared at 550 deg. C shows good electrochemical performances. - Abstract: Bismuth-vanadium oxyfluoride (Bi{sub 2}VO{sub 5}F) has been synthesized using a simple, solid-state reaction process at different sintering temperatures. The structure and performance of the samples have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge/discharge experiments. The results show that bismuth-vanadium oxyfluoride belongs to a tetragonal crystal system with space group I4mm. The sample that was synthesized at 550 deg. C (P550) exhibits relatively good electrochemical properties. Sample P550 shows a high, initial discharge capacity of 222 mAh g{sup -1} at a rate of 100 mA g{sup -1} between 1.4 and 3.5 V. Sample P550 also shows acceptable electrochemical cycling properties. After the first cycle, the discharge specific capacity remains between 106 and 155 mAh g{sup -1}, which plateaus between 2.1 and 1.9 V during the first 15 cycles.

  13. Carbon dioxide recycling

    Science.gov (United States)

    The recycling of carbon dioxide to methanol and dimethyl ether is seen to offer a substantial route to renewable and environmentally carbon neutral fuels. One of the authors has championed the “Methanol Economy" in articles and a book. By recycling ambient CO2, the authors argue ...

  14. Balancing atmospheric carbon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Goreau, T.J. (Discovery Bay Marine Laboratory, Univ. of the West Indies (JM))

    1990-01-01

    Rising carbon dioxide and global temperatures are causing increasing worldwide concern, and pressure towards an international law of the atmosphere is rapidly escalating, yet widespread misconceptions about the greenhouse effect's inevitability, time scale, and causes have inhibited effective consensus and action. Observations from Antarctic ice cores, Amazonian rain forests, and Carribean coral reefs suggest that the biological effects of climate change may be more severe than climate models predict. Efforts to limit emissions from fossil-fuel combustion alone are incapable of stabilizing levels of carbon dioxide in the atmosphere. Stabilizing atmospheric carbon dioxide requires coupled measures to balance sources and sinks of the gas, and will only be viable with large-scale investments in increased sustainable productivity on degraded tropical soils, and in long-term research on renewable energy and biomass product development in the developing countries. A mechanism is outlined which directly links fossil-fuel combustion sources of carbon dioxide to removal via increasing biotic productivity and storage. A preliminary cost-benefit analysis suggests that such measures are very affordable, costing far less than inaction. (With 88 refs.).

  15. Carbon dioxide sensor

    Science.gov (United States)

    Dutta, Prabir K [Worthington, OH; Lee, Inhee [Columbus, OH; Akbar, Sheikh A [Hilliard, OH

    2011-11-15

    The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

  16. Solid-state transformation of single precursor vanadium complex nanostructures to V₂O₅ and VO₂: catalytic activity of V₂O₅ for oxidative coupling of 2-naphthol.

    Science.gov (United States)

    Pradhan, Mukul; Roy, Anindita; Sinha, Arun Kumar; Sahoo, Ramkrishna; Deb, Dibakar; Pal, Tarasankar

    2015-01-28

    A vanadium complex, [(C5H5N)2V2O3·H2O], of different morphologies has been obtained via a modified hydrothermal procedure using pyridine and VOSO4 salt as the starting material. The evolved [(C5H5N)2V2O3·H2O] nanobelts are of 50-200 nm in width and of a length up to several millimeters. At higher temperatures (600 °C), the solid [(C5H5N)2V2O3·H2O] nanostructures are converted to vanadium pentoxide (V2O5) and vanadium dioxide (VO2) when heated in air and nitrogen atmosphere, respectively. During growth, the mechanism of the evolution of octahedra, truncated octahedra, and hollow truncated octahedra of [(C5H5N)2V2O3·H2O] are reported for the first time. These types of well-structured morphology are also isolated while V2O5 and VO2 are evolved. The as-grown belt-like and octahedral morphologies of [(C5H5N)2V2O3·H2O] are retained during the solid-state transformation, suggesting a route to evolve crystalline nanomaterials. Again, the morphological evolution of the [(C5H5N)2V2O3·H2O] nanostructures has been examined to be pyridine and precursor vanadyl sulfate (VS) concentration dependent. Thus, we are able to isolate truncated octahedra as an intermediate during the formation of [(C5H5N)2V2O3·H2O] nanobelts and nanoflowers with a high pyridine (Py) concentration. Interestingly, longer reaction times successively featured the transformation of truncated octahedra into nanobelts. Nanobelt evolution is not observed at low pyridine concentrations. However, the formation of octahedral morphology takes place at low pyridine concentration. All of the nanostructures were critically examined and characterized thoroughly by various physical techniques to ascertain their purity, structure and composition. An interesting, thermodynamically stable, single crystalline product from DMF soluble [(C5H5N)2V2O3·H2O] has been characterized, which indirectly supports the composition of [(C5H5N)2V2O3·H2O]. Selectively, vanadium pentoxide nanobelts have been found to be an

  17. Processing of Egyptian boiler-ash for extraction of vanadium and nickel.

    Science.gov (United States)

    Amer, A M

    2002-01-01

    Proposed technique in this investigation is given for vanadium and nickel enrichment in the Egyptian boiler ash. Among the various concepts for recovery of vanadium and nickel from boiler ash, the pyro-metallurgical approach is technically feasible, but is not cost-effective from an operational economy standpoint. Another technically viable process which, however, needs further development and presented in this investigation, is the hydrometallurgical processing that involves acid leaching under oxygen pressure of ground ash, followed by electrolytic separation of nickel from sulphate solution and vanadium is then neutralized and precipitated by adjustment the pH value and calcined to produce V2O5.

  18. Brain Metal Distribution and Neuro-Inflammatory Profiles after Chronic Vanadium Administration and Withdrawal in Mice

    Directory of Open Access Journals (Sweden)

    Oluwabusayo R. Folarin

    2017-07-01

    Full Text Available Vanadium is a potentially toxic environmental pollutant and induces oxidative damage in biological systems including the central nervous system (CNS. Its deposition in brain tissue may be involved in the pathogenesis of certain neurological disorders which after prolonged exposure can culminate into more severe pathology. Most studies on vanadium neurotoxicity have been done after acute exposure but in reality some populations are exposed for a lifetime. This work was designed to ascertain neurodegenerative consequences of chronic vanadium administration and to investigate the progressive changes in the brain after withdrawal from vanadium treatment. A total of 85 male BALB/c mice were used for the experiment and divided into three major groups of vanadium treated (intraperitoneally (i.p. injected with 3 mg/kg body weight of sodium metavanadate and sacrificed every 3 months till 18 months; matched controls; and animals that were exposed to vanadium for 3 months and thereafter the metal was withdrawn. Brain tissues were obtained after animal sacrifice. Sagittal cut sections of paraffin embedded tissue (5 μm were analyzed by the Laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS to show the absorption and distribution of vanadium metal. Also, Haematoxylin and Eosin (H&E staining of brain sections, and immunohistochemistry for Microglia (Iba-1, Astrocytes (GFAP, Neurons (Neu-N and Neu-N + 4′,6-diamidine-2′-pheynylindole dihydrochloride (Dapi Immunofluorescent labeling were observed for morphological and morphometric parameters. The LA–ICP–MS results showed progressive increase in vanadium uptake with time in different brain regions with prediction for regions like the olfactory bulb, brain stem and cerebellum. The withdrawal brains still show presence of vanadium metal in the brain slightly more than the controls. There were morphological alterations (of the layering profile, nuclear shrinkage in the prefrontal

  19. Determination of traces of vanadium with 5-bromosalicylhydroxamic acid by solid-phase spectrophotometry

    Energy Technology Data Exchange (ETDEWEB)

    Pascual-Reguera, M.I.; Molina-Diaz, A.; Ramos-Martos, N. (Univ. of Granada, Jaen (Spain)); Capitan-Vallvey, L.F. (Univ. of Granada (Spain))

    1991-12-01

    A microdetermination method at {mu}g.1{sup {minus}1} levels for vanadium by solid-phase spectrophotometry has been developed. 5-Bromosalicylhydroxamic acid was used as chromogenic reagent to form a 1:2 violet complex which is easily sorbed and concentrated on a dextran-type anion-exchange resin. The resin-phase absorbances at 560 and 850 nm were measured directly. Vanadium can be determined in the 5-60 {mu}g.1{sup {minus}1} range with a RSD of 4.3%. The method is applied to the determination of vanadium in petroleum crudes and natural water samples.

  20. A comparison of hypoglycemic activity of three species of basidiomycetes rich in vanadium.

    Science.gov (United States)

    Han, Chunchao; Liu, Tongjun

    2009-02-01

    The hypoglycemic activity of fermented mushroom of three fungi of basidiomycetes rich in vanadium was studied in this paper. Alloxan- and adrenalin-induced hyperglycemic mice were used in the study. The blood glucose and the sugar tolerance were determined. After the mice were administered (ig) with Coprinus comatus rich in vanadium, the blood glucose of alloxan-induced hyperglycemic mice decreased (p Coprinus comatus rich in vanadium on hyperglycemic animals are significant; it may be used as a hypoglycemic food or medicine for hyperglycemic people.

  1. The optical and electrochemical properties of electrochromic films: WO3+xV2O5

    Science.gov (United States)

    Li, Zhuying; Liu, Hui; Liu, Ye; Yang, Shaohong; Liu, Yan; Wang, Chong

    2010-05-01

    Since Deb's experiment in 1973 on the electrochromic effect, transmissive electrochromic films exhibit outstanding potential as energy efficient window controls which allow dynamic control of the solar energy transmission. These films with non-volatile memory, once in the coloured state, remain in the same state even after removal of the field. The optical and electrochemical properties of electrochromic films using magnetron sputter deposition tungsten oxide thin films and vanadium oxide doped tungsten-vanadium oxide thin films on ITO coated glass were investigated. From the UV region of the transmittance spectra, the optical band gap energy from the fundamental absorption edge can be determined. And the Cyclic voltammograms of these thin films in 1 mol LiClO4 propylene carbonate electrolyte (LIPC) were measured and analysed. The anode electrochromic V2O5 doped cathode electrochromic WO3 could make films colour changing while the transmittance of films keeped invariance. These performance characteristics make tungstenvanadium oxide colour changeably thin films are suitable for electrochromic windows applications.

  2. Orbital orientation mapping of V2O5 thin films

    Science.gov (United States)

    Lamoureux, B. R.; Jovic, V.; Singh, V. R.; Smith, K. E.

    2017-07-01

    We report the effects of growth methods on the orbital orientation in vanadium pentoxide (V2O5) thin films, an important factor to consider when selecting growth techniques for highly selective catalysts and devices. Thermal evaporation and sol-gel methods were used to synthesize the V2O5 films. The surface morphology, roughness, and orientation of the films were characterized by atomic force microscopy and x-ray diffraction. Surface electronic properties and oxidation states were assessed by x-ray photoemission spectroscopy. Polarized x-ray absorption spectroscopy demonstrated that the thermally evaporated film [which was in the (001) orientation] exhibited greater anisotropy than the (100) oriented sol-gel film. The observed increase in anisotropy agrees well with computational findings which revealed that more vanadyl bonds are present at the surface of the thermally evaporated film than at the surface of the sol-gel film. The same computational study also found that the orientation of these bonds is more parallel to the film surface in the thermally evaporated film than in the sol-gel film. The data suggest that the method of growth may be used as a controlled variable to select key film characteristics for potential applications.

  3. Carbon dioxide dangers demonstration model

    Science.gov (United States)

    Venezky, Dina; Wessells, Stephen

    2010-01-01

    Carbon dioxide is a dangerous volcanic gas. When carbon dioxide seeps from the ground, it normally mixes with the air and dissipates rapidly. However, because carbon dioxide gas is heavier than air, it can collect in snowbanks, depressions, and poorly ventilated enclosures posing a potential danger to people and other living things. In this experiment we show how carbon dioxide gas displaces oxygen as it collects in low-lying areas. When carbon dioxide, created by mixing vinegar and baking soda, is added to a bowl with candles of different heights, the flames are extinguished as if by magic.

  4. The Integration of a Structural Water Gas Shift Catalyst with a Vanadium Alloy Hydrogen Transport Device

    Energy Technology Data Exchange (ETDEWEB)

    Barton, Thomas; Argyle, Morris; Popa, Tiberiu

    2009-06-30

    This project is in response to a requirement for a system that combines water gas shift technology with separation technology for coal derived synthesis gas. The justification of such a system would be improved efficiency for the overall hydrogen production. By removing hydrogen from the synthesis gas stream, the water gas shift equilibrium would force more carbon monoxide to carbon dioxide and maximize the total hydrogen produced. Additional benefit would derive from the reduction in capital cost of plant by the removal of one step in the process by integrating water gas shift with the membrane separation device. The answer turns out to be that the integration of hydrogen separation and water gas shift catalysis is possible and desirable. There are no significant roadblocks to that combination of technologies. The problem becomes one of design and selection of materials to optimize, or at least maximize performance of the two integrated steps. A goal of the project was to investigate the effects of alloying elements on the performance of vanadium membranes with respect to hydrogen flux and fabricability. Vanadium was chosen as a compromise between performance and cost. It is clear that the vanadium alloys for this application can be produced, but the approach is not simple and the results inconsistent. For any future contracts, large single batches of alloy would be obtained and rolled with larger facilities to produce the most consistent thin foils possible. Brazing was identified as a very likely choice for sealing the membranes to structural components. As alloying was beneficial to hydrogen transport, it became important to identify where those alloying elements might be detrimental to brazing. Cataloging positive and negative alloying effects was a significant portion of the initial project work on vanadium alloying. A water gas shift catalyst with ceramic like structural characteristics was the second large goal of the project. Alumina was added as a

  5. Experimental and theoretical investigation of the chromium-vanadium-antimony system

    Energy Technology Data Exchange (ETDEWEB)

    Regus, Matthias; Bensch, Wolfgang [Kiel Univ. (Germany). Inst. of Inorganic Chemistry; Polesya, Svitlana; Kuhn, Gerhard; Mankovsky, Sergiy; Ebert, Hubert [Muenchen Univ. (Germany). Dept. of Chemistry; Bauers, Sage R.; Johnson, David C. [Oregon Univ., Eugene, OR (United States). Dept. of Chemistry

    2017-03-01

    The binary compound V{sub 3}Sb (V{sub 2.64}Sb, V{sub 3}Sb and V{sub 3.24}Sb) was synthesized as thin multilayered films with varying V:Sb ratios. The V-content determines the crystallization temperature and it is highest for the film with the lowest amount of V. Ternary chromium-vanadium-antimony (Cr-V-Sb) films were prepared containing Cr from 10 to 51 at-% with the Sb content fixed to yield M{sub 3}Sb (M=Cr, V). In the as-deposited state the layers are already interdiffused which is most likely caused by the very low repeating unit thickness between 0.29 and 0.68 nm investigated by X-ray diffraction experiments. All ternary compounds crystallized from the amorphous state with crystallization temperatures depending more on the repeating unit thickness than on chemical composition. For most samples the simultaneous crystallization of the two phases M{sub 3}Sb (A15 structure type) and MSb is observed. The crystalline A15 compounds are only stable in a limited temperature range and decompose at elevated temperatures. Compared to the binary Cr-Sb system crystallization of the hexagonal phase MSb (M=Cr, V) occurs at remarkably higher temperatures, i.e. in the ternary system nucleation and crystallization of this phase is hindered. The chemical composition requires short-range composition fluctuations to nucleate the binary phase. The first principles total energy calculations using the spin-polarized relativistic Korringa-Kohn-Rostoker (SPR-KKR) method confirm the experimental observations concerning the concentration-dependent stability of different phases of the Cr-V-Sb system. For the ratio M:Sb=3:1 the system is preferably stabilized in the A15 crystal structure for all possible Cr and V concentrations, while an increase of Sb content up to M:Sb=2:1 results in the stabilization of the Ni{sub 2}In structure for almost all Cr concentrations. Only in the V-rich regime of the system the Heusler Ni{sub 2}MnAl-type structure was found to be energetically more preferable.

  6. Enhanced photocatalytic activity of hydrogenated and vanadium doped TiO2 nanotube arrays grown by anodization of sputtered Ti layers

    Science.gov (United States)

    Motola, Martin; Satrapinskyy, Leonid; Čaplovicová, Mária; Roch, Tomáš; Gregor, Maroš; Grančič, Branislav; Greguš, Ján; Čaplovič, Ľubomír; Plesch, Gustav

    2018-03-01

    TiO2 nanotube (TiNT) arrays were grown on silicon substrate via electrochemical anodization of titanium films sputtered by magnetron. To improve the photocatalytic activity of arrays annealed in air (o-TiNT), doping of o-TiNT with vanadium was performed (o-V/TiNT). These non-doped and doped TiNT arrays were also hydrogenated in H2/Ar atmosphere to r-TiNT and r-V/TiNT samples, respectively. Investigation of composition and morphology by X-ray diffraction (XRD), electron microscopy (SEM and TEM) and X-ray photoelectron spectroscopy (XPS) showed the presence of well-ordered arrays of anatase nanotubes with average diameter and length of 100 nm and 1.3 μm, respectively. In both oxidized and reduced V-doped samples, vanadium is partly dissolved in the structure of anatase and partly deposited in form of oxide on the nanotube surface. Vanadium-doped and reduced samples exhibited higher rates in the photodegradation of organic dyes (compared to non-modified o-TiNT sample) and this is caused by limitation of electron-hole recombination rates and by shift of the energy gap into visible region. The photocatalytic activity was measured under UV, sunlight and visible irradiation, and the corresponding efficiency increased in the order (o-TiNT) < (r-TiNT) < (o-V/TiNT) < (r-V/TiNT). Under visible light, only r-TiNT and r-V/TiNT showed significant photocatalytic activity.

  7. Analysis and measurement of the electrolyte imbalance in a vanadium redox flow battery

    Science.gov (United States)

    Ngamsai, Kittima; Arpornwichanop, Amornchai

    2015-05-01

    Electrolyte imbalance in vanadium redox flow batteries is an important problem for its long-term operation as it leads to loss of energy. To address this problem, a modified open circuit voltage (OCV) cell is developed by adding a middle half cell between the negative and positive half cells of a conventional OCV cell and used to predict the oxidation state of vanadium in the electrolyte solution from the measured voltage in each side of the electrolyte (positive and negative). The correlation between the oxidation state of vanadium and cell voltage is explained by a basic electrochemical principle and the Nernst equation. The experimental results show that at different oxidation states of vanadium, the predicted OCV agrees reasonably with the experimental data. In addition, the effect of the state of charge (SOC) and electrolyte imbalance on the energy capacity of a cell is discussed.

  8. A Disposable Alkaline Phosphatase-Based Biosensor for Vanadium Chronoamperometric Determination

    Science.gov (United States)

    Alvarado-Gámez, Ana Lorena; Alonso-Lomillo, María Asunción; Domínguez-Renedo, Olga; Arcos-Martínez, María Julia

    2014-01-01

    A chronoamperometric method for vanadium ion determination, based on the inhibition of the enzyme alkaline phosphatase, is reported. Screen-printed carbon electrodes modified with gold nanoparticles were used as transducers for the immobilization of the enzyme. The enzymatic activity over 4-nitrophenyl phosphate sodium salt is affected by vanadium ions, which results in a decrease in the chronoamperometric current registered. The developed method has a detection limit of 0.39 ± 0.06 μM, a repeatability of 7.7% (n = 4) and a reproducibility of 8% (n = 3). A study of the possible interferences shows that the presence of Mo(VI), Cr(III), Ca(II) and W(VI), may affect vanadium determination at concentration higher than 1.0 mM. The method was successfully applied to the determination of vanadium in spiked tap water. PMID:24569772

  9. A Disposable Alkaline Phosphatase-Based Biosensor for Vanadium Chronoamperometric Determination

    Directory of Open Access Journals (Sweden)

    Ana Lorena Alvarado-Gámez

    2014-02-01

    Full Text Available A chronoamperometric method for vanadium ion determination, based on the inhibition of the enzyme alkaline phosphatase, is reported. Screen-printed carbon electrodes modified with gold nanoparticles were used as transducers for the immobilization of the enzyme. The enzymatic activity over 4-nitrophenyl phosphate sodium salt is affected by vanadium ions, which results in a decrease in the chronoamperometric current registered. The developed method has a detection limit of 0.39 ± 0.06 µM, a repeatability of 7.7% (n = 4 and a reproducibility of 8% (n = 3. A study of the possible interferences shows that the presence of Mo(VI, Cr(III, Ca(II and W(VI, may affect vanadium determination at concentration higher than 1.0 mM. The method was successfully applied to the determination of vanadium in spiked tap water.

  10. The Importance of Vanadium Concentration in Ground and Deep Ground Water for Spring Water Quality

    National Research Council Canada - National Science Library

    MARCZEWSKI, Krzysztof; MARCZEWSKA, Barbara; KUZIOŁA, RAFA

    2015-01-01

      Vanadium, depending on the consumed dose may be toxic or health-promoting. Therefore, the knowledge of its concentration in the drinking therapeutic water, in particular in the medicinal mineral sources seems to be very important...

  11. Thin Films

    Directory of Open Access Journals (Sweden)

    M. Benmouss

    2003-01-01

    the optical absorption are consistent with the film color changes. Finally, the optical and electrochromic properties of the films prepared by this method are compared with those of our sputtered films already studied and with other works.

  12. Chemical speciation of vanadium in particulate matter emitted from diesel vehicles and urban atmospheric aerosols.

    Science.gov (United States)

    Shafer, Martin M; Toner, Brandy M; Overdier, Joel T; Schauer, James J; Fakra, Sirine C; Hu, Shaohua; Herner, Jorn D; Ayala, Alberto

    2012-01-03

    We report on the development and application of an integrated set of analytical tools that enable accurate measurement of total, extractable, and, importantly, the oxidation state of vanadium in sub-milligram masses of environmental aerosols and solids. Through rigorous control of blanks, application of magnetic-sector-ICPMS, and miniaturization of the extraction/separation methods we have substantially improved upon published quantification limits. The study focused on the application of these methods to particulate matter (PM) emissions from diesel vehicles, both in baseline configuration without after-treatment and also equipped with advanced PM and NO(x) emission controls. Particle size-resolved vanadium speciation data were obtained from dynamometer samples containing total vanadium pools of only 0.2-2 ng and provide some of the first measurements of the oxidation state of vanadium in diesel vehicle PM emissions. The emission rates and the measured fraction of V(V) in PM from diesel engines running without exhaust after-treatment were both low (2-3 ng/mile and 13-16%, respectively). The V(IV) species was measured as the dominant vanadium species in diesel PM emissions. A significantly greater fraction of V(V) (76%) was measured in PM from the engine fitted with a prototype vanadium-based selective catalytic reductors (V-SCR) retrofit. The emission rate of V(V) determined for the V-SCR equipped vehicle (103 ng/mile) was 40-fold greater than that from the baseline vehicle. A clear contrast between the PM size-distributions of V(V) and V(IV) emissions was apparent, with the V(V) distribution characterized by a major single mode in the ultrafine (vanadium-containing fine-particle PM from the V-SCR identified V(2)O(5) as the dominant vanadium species.

  13. The extraction of vanadium pentoxide from waste of titanium tetrachloride by various methods

    Directory of Open Access Journals (Sweden)

    Инна Михайловна Гунько

    2015-04-01

    Full Text Available In article the recovery possibility of vanadium pentoxide from wastes, formed as a result of purification from impurities of technical titanium tetrachloride is researched. The purification from impurities is realized by different methods – pulp of lower titanium chlorides, hydrocarbonic reducer and cascade-rectifying purification. Usage of these purification methods leads to formation of anthropogenic wastes. The researches is shown that processing of these wastes is reasonable for the purpose of vanadium pentoxide extraction

  14. Brain Metal Distribution and Neuro-Inflammatory Profiles after Chronic Vanadium Administration and Withdrawal in Mice

    OpenAIRE

    Folarin, Oluwabusayo R.; Snyder, Amanda M.; Peters, Douglas G.; Funmilayo Olopade; Connor, James R.; Olopade, James O

    2017-01-01

    Vanadium is a potentially toxic environmental pollutant and induces oxidative damage in biological systems including the central nervous system (CNS). Its deposition in brain tissue may be involved in the pathogenesis of certain neurological disorders which after prolonged exposure can culminate into more severe pathology. Most studies on vanadium neurotoxicity have been done after acute exposure but in reality some populations are exposed for a lifetime. This work was designed to ascertain n...

  15. Benchmark experiment on vanadium assembly with D-T neutrons. Leakage neutron spectrum measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kokooo; Murata, I.; Nakano, D.; Takahashi, A. [Osaka Univ., Suita (Japan); Maekawa, F.; Ikeda, Y.

    1998-03-01

    The fusion neutronics benchmark experiments have been done for vanadium and vanadium alloy by using the slab assembly and time-of-flight (TOF) method. The leakage neutron spectra were measured from 50 keV to 15 MeV and comparison were done with MCNP-4A calculations which was made by using evaluated nuclear data of JENDL-3.2, JENDL-Fusion File and FENDL/E-1.0. (author)

  16. A Novel Eco-Friendly Vanadium Precipitation Method by Hydrothermal Hydrogen Reduction Technology

    Directory of Open Access Journals (Sweden)

    Guobin Zhang

    2017-09-01

    Full Text Available In view of the serious pollution problems caused by the traditional vanadium precipitation process, the eco-friendly technology of hydrothermal hydrogen reduction was first applied to precipitate phase pure vanadium sesquioxide (V2O3 products from stripped pentavalent vanadium (V (V solution extracted from vanadium-bearing shale. Thermodynamic analysis demonstrate the method of hydrothermal hydrogen reduction is feasible for precipitating V2O3 from V (V solution at a suitable pH range, and the reduction should better be carried out at a lower pH under the pH range in which V2O3 can exist stably. The V2O3 products of 99.92% in purity and a high vanadium precipitation percentage of 99.25% were achieved under a facile reaction condition of initial solution pH of 6, reaction temperature of 523 K, H2 partial pressure of 4 MPa and reaction time of 2 h. Based on the analysis of XRD and FE-SEM with EDS for the precipitation products obtained at serial reaction times, the phase transformation mechanism was summarized to serial reductions with the phase transformation of HxVyOz(2z−x−5y− → NaV2O5 → VO2(H2O0.5 → VOOH → V2O3. Compared with the two-step traditional method of precipitating vanadium with ammonium salt and roast-reduction (react at above 773 K for more than 3 h for preparing V2O3, this method only experiences one-step reduction under a green atmosphere of H2 gas with a lower reaction temperature of 523 K and a shorter reaction time of 2h. Therefore, this method for vanadium precipitation is characterized by being eco-friendly, having a short process and being low-energy consumption, which has great significance for the sustainable development of vanadium industry.

  17. Factors controlling enrichment of vanadium and nickel in the bitumen of organic sedimentary rocks

    Energy Technology Data Exchange (ETDEWEB)

    Lewan, M.D. (Amoco Production Co., Tulsa, OK); Maynard, J.B.

    1982-12-01

    Enriched concentrations of vanadium and nickel have been noted in a variety of naturally occurring organic substances including crude oils, asphalts, and organic matter in some sedimentary rocks. Vanadium and nickel concentrations in bitumens extracted from a variety of organic sedimentary rock types of different geological ages and geographical areas range from less than 0.2 to 4760 ppm and less than 7 to 1240 ppm, respectively. Vanadium concentrations showed a polymodal frequency distribution. The concentrations of these two metals showed no significant correlations with bitumen content, organic carbon content, or proportionality between bitumen and organic carbon contents. Enriched vanadium and nickel concentrations greater than 100 ppm are only observed in bitumens that are associated with Type II and Type I kerogens. Conversely, bitumens associated with Type III kerogens contained vanadium and nickel concentrations less than 100 ppm. The high stability of vanadium and nickel in crude oils, asphalts, and bitumens suggest that they occur in tetrapyrrole complexes. The complexes may occur as free molecules or assimulated subunits in macromolecules within the bitumen. Vanadium and nickel are preferentially concentrated in tetrapyrrole complexes because of their availability in anaerobic systems, small atomic radii, and favorable electron configurations. The potential for an organic sediment to be enriched in these two metals depends upon the amount of tetrapyrroles preserved in its organic matter. Tetrapyrrole preservation preferentially decreases in organic matter as exposure time to aerobic conditions increases. The potential for vanadium and nickel enrichment is therefore the highest in organic matter derived from algae that encountered anaerobic conditions early in their depositional history.

  18. One-pot synthesis of optically active allyl esters via lipase-vanadium combo catalysis.

    Science.gov (United States)

    Akai, Shuji; Hanada, Ryosuke; Fujiwara, Noboru; Kita, Yasuyuki; Egi, Masahiro

    2010-11-05

    The combination of vanadium-oxo compounds (3 or 4) with a lipase produced the regio- and enantioconvergent transformation of racemic allyl alcohols (1 or 2) into optically active allyl esters. In this system, the vanadium compounds catalyzed the continuous racemization of the alcohols along with the transposition of the hydroxyl group, while the lipase effected the chemo- and enantioselective esterification to achieve the dynamic kinetic resolution.

  19. Temperature Dependence of Uranium and Vanadium Adsorption on Amidoxime-Based Adsorbents in Natural Seawater

    Energy Technology Data Exchange (ETDEWEB)

    Kuo, Li-Jung [Marine Sciences Laboratory, Pacific Northwest National Laboratory, Sequim WA 98382 USA; Gill, Gary A. [Marine Sciences Laboratory, Pacific Northwest National Laboratory, Sequim WA 98382 USA; Tsouris, Costas [Oak Ridge National Laboratory, Oak Ridge TN 37831 USA; Rao, Linfeng [Chemical Sciences Division, Lawrence Berkeley National Laboratory, Berkeley CA 94720 USA; Pan, Horng-Bin [Department of Chemistry, University of Idaho, Moscow ID 83844 USA; Wai, Chien M. [Department of Chemistry, University of Idaho, Moscow ID 83844 USA; Janke, Christopher J. [Oak Ridge National Laboratory, Oak Ridge TN 37831 USA; Strivens, Jonathan E. [Marine Sciences Laboratory, Pacific Northwest National Laboratory, Sequim WA 98382 USA; Wood, Jordana R. [Marine Sciences Laboratory, Pacific Northwest National Laboratory, Sequim WA 98382 USA; Schlafer, Nicholas [Marine Sciences Laboratory, Pacific Northwest National Laboratory, Sequim WA 98382 USA; D' Alessandro, Evan K. [Rosensteil School of Marine and Atmospheric Chemistry, University of Miami, Miami FL 33149 USA

    2018-01-16

    The apparent enthalpy and entropy of the complexation of uranium (VI) and vanadium (V) with amidoxime ligands grafted onto polyethylene fiber was determined using time series measurements of adsorption capacities in natural seawater at three different temperatures. The complexation of uranium was highly endothermic, while the complexation of vanadium showed minimal temperature sensitivity. Amidoxime-based polymeric adsorbents exhibit significantly increased uranium adsorption capacities and selectivity in warmer waters.

  20. Simulation of vanadium-48 production using MCNPX code

    Directory of Open Access Journals (Sweden)

    Sadeghi Mahdi

    2012-01-01

    Full Text Available Vanadium-48 was produced through the irradiation of the natural titanium target via the natTi(p, xn48V reaction. The titanium target was irradiated at 1 mA current and by a 21 MeV proton beam for 4 hours. In this paper, the activity of 48V, 43Sc, and 46Sc radionuclides and the efficacy of the 47Ti(p, g, 48Ti(p, n, and 49Ti(p, 2n channel reactions to form 48V radionuclide were determined using MCNPX code. Furthermore, the experimental activity of 48V was compared with the estimated value for the thick target yield produced in the irradiation time according to MCNPX code. Good agreement between production yield of the 48V and the simulation yield was observed. In conclusion, MCNPX code can be used for the estimation of the production yield.