WorldWideScience

Sample records for valpar component work

  1. Return to work: a case of PTSD, dissociative identity disorder, and satanic ritual abuse.

    Science.gov (United States)

    Precin, Patricia

    2011-01-01

    This case study investigated an intervention that enabled an individual with Posttraumatic Stress Disorder (PTSD), Dissociative Identity Disorder (DID), and satanic ritual abuse to return to work after discharge from psychiatric inpatient treatment. The Occupational Questionnaire [88] revealed past difficulties in organization, awareness of time, communication, cooperation, frustration tolerance, competition, stress management, goal setting, and amnesia resulting in incomplete tasks and sporadic attendance at work. The Role Checklist [72] identified alters valuing work and employed in the past. The Modified Interest Checklist [70] identified running as an interest that 24 alters shared. Based on the initial evaluations, three times a week treadmill running was used as an intervention that built work skills (as measured by the Clerical Work Sample of the Valpar Component Work Sample Series [97]) necessary to sustain gainful employment upon discharge. After intervention, this individual improved in awareness of time, stress management, and goal setting abilities and was less amnestic as per the Occupational Questionnaire [88] and four additional alters expressed an interest in work according to the Modified Interest Checklist [70].

  2. Central and Peripheral Components of Working Memory Storage

    Science.gov (United States)

    Cowan, Nelson; Saults, J. Scott; Blume, Christopher L.

    2014-01-01

    This study re-examines the issue of how much of working memory storage is central, or shared across sensory modalities and verbal and nonverbal codes, and how much is peripheral, or specific to a modality or code. In addition to the exploration of many parameters in 9 new dual-task experiments and re-analysis of some prior evidence, the innovations of the present work compared to previous studies of memory for two stimulus sets include (1) use of a principled set of formulas to estimate the number of items in working memory, and (2) a model to dissociate central components, which are allocated to very different stimulus sets depending on the instructions, from peripheral components, which are used for only one kind of material. We consistently find that the central contribution is smaller than was suggested by Saults and Cowan (2007), and that the peripheral contribution is often much larger when the task does not require the binding of features within an object. Previous capacity estimates are consistent with the sum of central plus peripheral components observed here. We consider the implications of the data as constraints on theories of working memory storage and maintenance. PMID:24867488

  3. Resource-sharing in multiple-component working memory

    OpenAIRE

    Doherty, Jason M.; Logie, Robert H.

    2016-01-01

    Working memory research often focuses on measuring the capacity of the system and how it relates to other cognitive abilities. However, research into the structure of working memory is less concerned with an overall capacity measure but rather with the intricacies of underlying components and their contribution to different tasks. A number of models of working memory structure have been proposed, each with different assumptions and predictions, but none of which adequately accounts for the fu...

  4. Motivation and Justice at Work: The Role of Emotion and Cognition Components of Personal and Collective Work Identity.

    Science.gov (United States)

    Nordhall, Ola; Knez, Igor

    2017-01-01

    The aim of this study was to investigate the role of personal and collective work identity (including emotion and cognition components), in predicting work motivation (operationalized as work self-determined motivation) and organizational justice (operationalized as organizational pay justice). Digitized questionnaires were distributed by e-mail to 2905 members, teachers, of a Swedish trade union. A total of 768 individuals answered the questionnaire and by that participated in this study. Personal- compared to collective work identity was shown to positively associate with self-determined motivation accounted for by the emotion component of personal work identity. Collective compared to personal work identity was reported to positively associate with organizational pay justice accounted for by the cognition component of collective work identity. All this suggests that both work-related motivation and organizational justice might be, to some extent, accounted for by the psychological mechanisms of work identity and that, as predicted, different types of work identity, play different significant roles in predicting motivation and justice at work. More precisely, the emotion component of work identity was more pronounced in personal work-bonding relationships, and the cognitive component, of work identity in contrast, was more pronounced in collective work-bonding relationships.

  5. Components of working memory and visual selective attention.

    Science.gov (United States)

    Burnham, Bryan R; Sabia, Matthew; Langan, Catherine

    2014-02-01

    Load theory (Lavie, N., Hirst, A., De Fockert, J. W., & Viding, E. [2004]. Load theory of selective attention and cognitive control. Journal of Experimental Psychology: General, 133, 339-354.) proposes that control of attention depends on the amount and type of load that is imposed by current processing. Specifically, perceptual load should lead to efficient distractor rejection, whereas working memory load (dual-task coordination) should hinder distractor rejection. Studies support load theory's prediction that working memory load will lead to larger distractor effects; however, these studies used secondary tasks that required only verbal working memory and the central executive. The present study examined which other working memory components (visual, spatial, and phonological) influence visual selective attention. Subjects completed an attentional capture task alone (single-task) or while engaged in a working memory task (dual-task). Results showed that along with the central executive, visual and spatial working memory influenced selective attention, but phonological working memory did not. Specifically, attentional capture was larger when visual or spatial working memory was loaded, but phonological working memory load did not affect attentional capture. The results are consistent with load theory and suggest specific components of working memory influence visual selective attention. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  6. Motivation and Justice at Work: The Role of Emotion and Cognition Components of Personal and Collective Work Identity

    Directory of Open Access Journals (Sweden)

    Ola Nordhall

    2018-01-01

    Full Text Available The aim of this study was to investigate the role of personal and collective work identity (including emotion and cognition components, in predicting work motivation (operationalized as work self-determined motivation and organizational justice (operationalized as organizational pay justice. Digitized questionnaires were distributed by e-mail to 2905 members, teachers, of a Swedish trade union. A total of 768 individuals answered the questionnaire and by that participated in this study. Personal- compared to collective work identity was shown to positively associate with self-determined motivation accounted for by the emotion component of personal work identity. Collective compared to personal work identity was reported to positively associate with organizational pay justice accounted for by the cognition component of collective work identity. All this suggests that both work-related motivation and organizational justice might be, to some extent, accounted for by the psychological mechanisms of work identity and that, as predicted, different types of work identity, play different significant roles in predicting motivation and justice at work. More precisely, the emotion component of work identity was more pronounced in personal work-bonding relationships, and the cognitive component, of work identity in contrast, was more pronounced in collective work-bonding relationships.

  7. Motivation and Justice at Work: The Role of Emotion and Cognition Components of Personal and Collective Work Identity

    Science.gov (United States)

    Nordhall, Ola; Knez, Igor

    2018-01-01

    The aim of this study was to investigate the role of personal and collective work identity (including emotion and cognition components), in predicting work motivation (operationalized as work self-determined motivation) and organizational justice (operationalized as organizational pay justice). Digitized questionnaires were distributed by e-mail to 2905 members, teachers, of a Swedish trade union. A total of 768 individuals answered the questionnaire and by that participated in this study. Personal- compared to collective work identity was shown to positively associate with self-determined motivation accounted for by the emotion component of personal work identity. Collective compared to personal work identity was reported to positively associate with organizational pay justice accounted for by the cognition component of collective work identity. All this suggests that both work-related motivation and organizational justice might be, to some extent, accounted for by the psychological mechanisms of work identity and that, as predicted, different types of work identity, play different significant roles in predicting motivation and justice at work. More precisely, the emotion component of work identity was more pronounced in personal work-bonding relationships, and the cognitive component, of work identity in contrast, was more pronounced in collective work-bonding relationships. PMID:29379454

  8. Age-related differences in working memory updating components.

    Science.gov (United States)

    Linares, Rocío; Bajo, M Teresa; Pelegrina, Santiago

    2016-07-01

    The aim of this study was to investigate possible age-related changes throughout childhood and adolescence in different component processes of working memory updating (WMU): retrieval, transformation, and substitution. A set of numerical WMU tasks was administered to four age groups (8-, 11-, 14-, and 21-year-olds). To isolate the effect of each of the WMU components, participants performed different versions of a task that included different combinations of the WMU components. The results showed an expected overall decrease in response times and an increase in accuracy performance with age. Most important, specific age-related changes in the retrieval component were found, demonstrating that the effect of retrieval on accuracy was larger in children than in adolescents or young adults. These findings indicate that the availability of representations from outside the focus of attention may change with age. Thus, the retrieval component of updating could contribute to the age-related changes observed in the performance of many updating tasks. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Role of working memory components in planning performance of individuals with Parkinson's disease

    NARCIS (Netherlands)

    Altgassen, A.M.; Phillips, L.H.; Kopp, U.; Kliegel, M.

    2007-01-01

    The current study investigated the involvement of all four components of Baddeley's [Baddeley, A. D. (2000). The episodic buffer: A new component of working memory? Trends in Cognitive Sciences, 4, 417–423] revised working memory model in deficits of planning accompanying Parkinson's disease (PD).

  10. The episodic buffer: a new component of working memory?

    Science.gov (United States)

    Baddeley

    2000-11-01

    In 1974, Baddeley and Hitch proposed a three-component model of working memory. Over the years, this has been successful in giving an integrated account not only of data from normal adults, but also neuropsychological, developmental and neuroimaging data. There are, however, a number of phenomena that are not readily captured by the original model. These are outlined here and a fourth component to the model, the episodic buffer, is proposed. It comprises a limited capacity system that provides temporary storage of information held in a multimodal code, which is capable of binding information from the subsidiary systems, and from long-term memory, into a unitary episodic representation. Conscious awareness is assumed to be the principal mode of retrieval from the buffer. The revised model differs from the old principally in focussing attention on the processes of integrating information, rather than on the isolation of the subsystems. In doing so, it provides a better basis for tackling the more complex aspects of executive control in working memory.

  11. The multi-component model of working memory: explorations in experimental cognitive psychology.

    Science.gov (United States)

    Repovs, G; Baddeley, A

    2006-04-28

    There are a number of ways one can hope to describe and explain cognitive abilities, each of them contributing a unique and valuable perspective. Cognitive psychology tries to develop and test functional accounts of cognitive systems that explain the capacities and properties of cognitive abilities as revealed by empirical data gathered by a range of behavioral experimental paradigms. Much of the research in the cognitive psychology of working memory has been strongly influenced by the multi-component model of working memory [Baddeley AD, Hitch GJ (1974) Working memory. In: Recent advances in learning and motivation, Vol. 8 (Bower GA, ed), pp 47-90. New York: Academic Press; Baddeley AD (1986) Working memory. Oxford, UK: Clarendon Press; Baddeley A. Working memory: Thought and action. Oxford: Oxford University Press, in press]. By expanding the notion of a passive short-term memory to an active system that provides the basis for complex cognitive abilities, the model has opened up numerous questions and new lines of research. In this paper we present the current revision of the multi-component model that encompasses a central executive, two unimodal storage systems: a phonological loop and a visuospatial sketchpad, and a further component, a multimodal store capable of integrating information into unitary episodic representations, termed episodic buffer. We review recent empirical data within experimental cognitive psychology that has shaped the development of the multicomponent model and the understanding of the capacities and properties of working memory. Research based largely on dual-task experimental designs and on neuropsychological evidence has yielded valuable information about the fractionation of working memory into independent stores and processes, the nature of representations in individual stores, the mechanisms of their maintenance and manipulation, the way the components of working memory relate to each other, and the role they play in other

  12. Structural integrity of stainless steel components exposed to neutron irradiation. Change in failure strength of cracked components due to cold working

    International Nuclear Information System (INIS)

    Kamaya, Masayuki; Hojo, Tomohiro; Mochizuki, Masahito

    2015-01-01

    Load carrying capacity of austenitic stainless steel component is increased due to hardening caused by neutron irradiation if no crack is included in the component. On the other hand, if a crack is initiated in the reactor components, the hardening may decrease the load carrying capacity due to reduction in fracture toughness. In this paper, in order to develop a failure assessment procedure of irradiated cracked components, characteristics of change in failure strength of stainless steels due to cold working were investigated. It was experimentally shown that the proof and tensile strengths were increased by the cold working, whereas the fracture toughness was decreased. The fracture strengths of a cylinder with a circumferential surface crack were analyzed using the obtained material properties. Although the cold working altered the failure mode from plastic collapse to the unsteady ductile crack growth, it did not reduce failure strengths even if 50% cold working was applied. The increase in failure strength was caused not only by increase in flow stress but also by reduction in J-integral value, which was brought by the change in stress-strain curve. It was shown that the failure strength of the hardened stainless steel components could be derived by the two-parameter method, in which the change in material properties could be reasonably considered. (author)

  13. Role of working memory components in planning performance of individuals with Parkinson's disease.

    Science.gov (United States)

    Altgassen, Mareike; Phillips, Louise; Kopp, Ute; Kliegel, Matthias

    2007-06-11

    The current study investigated the involvement of all four components of Baddeley's [Baddeley, A. D. (2000). The episodic buffer: A new component of working memory? Trends in Cognitive Sciences, 4, 417-423] revised working memory model in deficits of planning accompanying Parkinson's disease (PD). PD resulted in poorer formulation and execution of plans, as measured by the Tower of London task. PD also reduced the efficiency of the episodic buffer and central executive components of working memory, but did not influence storage of verbal or visuospatial information. Planning deficits in PD were particularly linked to problems in integrating multimodal short-term information with long-term memory (episodic buffer). These results emphasize the importance of integrative and executive processing in cognitive problems in PD, rather than simple memory deficits.

  14. Helpful Components Involved in the Cognitive-Experiential Model of Dream Work

    Science.gov (United States)

    Tien, Hsiu-Lan Shelley; Chen, Shuh-Chi; Lin, Chia-Huei

    2009-01-01

    The purpose of the study was to examine the helpful components involved in the Hill's cognitive-experiential dream work model. Participants were 27 volunteer clients from colleges and universities in northern and central parts of Taiwan. Each of the clients received 1-2 sessions of dream interpretations. The cognitive-experiential dream work model…

  15. Longitudinal Changes in Component Processes of Working Memory.

    Science.gov (United States)

    Rieckmann, Anna; Pudas, Sara; Nyberg, Lars

    2017-01-01

    Working memory (WM) entails maintenance and manipulation of information in the absence of sensory input. This study investigated the trajectories and neural basis of these component processes of WM functions in aging. Longitudinal human functional magnetic resonance imaging (fMRI) data are presented from 136 older individuals (55-80 years) who were scanned at baseline and again 4 years later. We obtained evidence that age-related changes in parietal and frontal components of the WM core network are dissociable in terms of their role in maintenance of perceptual representations and further manipulation of this information, respectively. Individual difference analyses in performance subgroups showed that only prefrontal changes in fMRI activation were accompanied by changes in performance, but parietal brain activity was related to study dropout. We discuss the results in terms of possible neurobiological causes underlying separable aging-related declines in inferior parietal cortex and lateral prefrontal cortex that differentially affect WM functions.

  16. Motivation and Justice at Work: The Role of Emotion and Cognition Components of Personal and Collective Work Identity

    OpenAIRE

    Ola Nordhall; Ola Nordhall; Igor Knez

    2018-01-01

    The aim of this study was to investigate the role of personal and collective work identity (including emotion and cognition components), in predicting work motivation (operationalized as work self-determined motivation) and organizational justice (operationalized as organizational pay justice). Digitized questionnaires were distributed by e-mail to 2905 members, teachers, of a Swedish trade union. A total of 768 individuals answered the questionnaire and by that participated in this study. Pe...

  17. Effects of Methylphenidate on Working Memory Components: Influence of Measurement

    Science.gov (United States)

    Bedard, Anne-Claude; Jain, Umesh; Hogg-Johnson, Sheilah; Tannock, Rosemary

    2007-01-01

    Background: To investigate the effects of methylphenidate (MPH) on components of working memory (WM) in attention-deficit hyperactivity disorder (ADHD) and determine the responsiveness of WM measures to MPH. Methods: Participants were a clinical sample of 50 children and adolescents with ADHD, aged 6 to 16 years old, who participated in an acute…

  18. Principal Component Analysis of Working Memory Variables during Child and Adolescent Development.

    Science.gov (United States)

    Barriga-Paulino, Catarina I; Rodríguez-Martínez, Elena I; Rojas-Benjumea, María Ángeles; Gómez, Carlos M

    2016-10-03

    Correlation and Principal Component Analysis (PCA) of behavioral measures from two experimental tasks (Delayed Match-to-Sample and Oddball), and standard scores from a neuropsychological test battery (Working Memory Test Battery for Children) was performed on data from participants between 6-18 years old. The correlation analysis (p 1), the scores of the first extracted component were significantly correlated (p < .05) to most behavioral measures, suggesting some commonalities of the processes of age-related changes in the measured variables. The results suggest that this first component would be related to age but also to individual differences during the cognitive maturation process across childhood and adolescence stages. The fourth component would represent the speed-accuracy trade-off phenomenon as it presents loading components with different signs for reaction times and errors.

  19. Contrasting single and multi-component working-memory systems in dual tasking.

    Science.gov (United States)

    Nijboer, Menno; Borst, Jelmer; van Rijn, Hedderik; Taatgen, Niels

    2016-05-01

    Working memory can be a major source of interference in dual tasking. However, there is no consensus on whether this interference is the result of a single working memory bottleneck, or of interactions between different working memory components that together form a complete working-memory system. We report a behavioral and an fMRI dataset in which working memory requirements are manipulated during multitasking. We show that a computational cognitive model that assumes a distributed version of working memory accounts for both behavioral and neuroimaging data better than a model that takes a more centralized approach. The model's working memory consists of an attentional focus, declarative memory, and a subvocalized rehearsal mechanism. Thus, the data and model favor an account where working memory interference in dual tasking is the result of interactions between different resources that together form a working-memory system. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Academic workload management towards learning, components of academic work

    OpenAIRE

    Ocvirk, Aleksandra; Trunk Širca, Nada

    2013-01-01

    This paper deals with attributing time value to academic workload from the point of view of an HEI, management of teaching and an individual. We have conducted a qualitative study aimed at analysing documents on academic workload in terms of its definition, and at analysing the attribution of time value to components of academic work in relation to the proportion of workload devoted to teaching in the sense of ensuring quality and effectiveness of learning, and in relation to financial implic...

  1. Working Memory Components and Problem-Solving Accuracy: Are There Multiple Pathways?

    Science.gov (United States)

    Swanson, H. Lee; Fung, Wenson

    2016-01-01

    This study determined the working memory (WM) components (executive, phonological short-term memory [STM], and visual-spatial sketchpad) that best predicted mathematical word problem-solving accuracy in elementary schoolchildren (N = 392). The battery of tests administered to assess mediators between WM and problem-solving included measures of…

  2. Accomplishment of JT-60U disassembly work dealing with radioactive components

    International Nuclear Information System (INIS)

    Ikeda, Yoshitaka

    2015-01-01

    The upgrade of the JT-60U to the superconducting tokamak 'JT-60SA' has been carried out to contribute the early realization of fusion energy by addressing key physics issues relevant for ITER and DEMO. Disassembly of the JT-60U tokamak was required so as to newly install the JT-60SA torus at the same position in the torus hall. The JT-60U tokamak was featured by the complicated and welded structure against the strong electromagnetic force, and by the radioactivation due to deuterium-deuterium (D-D) reactions of 1.5x10"2"0 (n) in total. Since this work was the first experience of disassembling a large radioactivated fusion device in Japan, careful preparations of disassembly activities, including treatment of the radioactivated materials and safety work, have been made. About 13,000 components with a total weight of more than 5,400 tonnes were removed from the torus hall and stored safely in storage facilities. All disassembly components were stored with recording the data such as dose rate, weight and kind of material, so as to apply the clearance level regulation in future. It was confirmed that the main radioactive material of the disassembly components was the stainless steel and that its dose rate was almost background level (∼0.1 μSv/h) at ∼10 m far from the vacuum vessel. It seems that the disassembly components with background dose level are in the clearance level. The assembly of JT-60SA tokamak has started in January 2013 after this disassembly of the JT-60U tokamak. (author)

  3. The Sensory Components of High-Capacity Iconic Memory and Visual Working Memory

    OpenAIRE

    Bradley, Claire; Pearson, Joel

    2012-01-01

    Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more “high-level” alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their...

  4. The sensory components of high-capacity iconic memory and visual working memory

    OpenAIRE

    Claire eBradley; Claire eBradley; Joel ePearson

    2012-01-01

    Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more high-level alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their c...

  5. Working memory components as predictors of children's mathematical word problem solving.

    Science.gov (United States)

    Zheng, Xinhua; Swanson, H Lee; Marcoulides, George A

    2011-12-01

    This study determined the working memory (WM) components (executive, phonological loop, and visual-spatial sketchpad) that best predicted mathematical word problem-solving accuracy of elementary school children in Grades 2, 3, and 4 (N=310). A battery of tests was administered to assess problem-solving accuracy, problem-solving processes, WM, reading, and math calculation. Structural equation modeling analyses indicated that (a) all three WM components significantly predicted problem-solving accuracy, (b) reading skills and calculation proficiency mediated the predictive effects of the central executive system and the phonological loop on solution accuracy, and (c) academic mediators failed to moderate the relationship between the visual-spatial sketchpad and solution accuracy. The results support the notion that all components of WM play a major role in predicting problem-solving accuracy, but basic skills acquired in specific academic domains (reading and math) can compensate for some of the influence of WM on children's mathematical word problem solving. Copyright © 2011 Elsevier Inc. All rights reserved.

  6. A feasibility work on the applications of MRE to automotive components

    Science.gov (United States)

    Kim, S. H.; Park, Y. J.; Cha, A. R.; Kim, G. W.; Bang, J. H.; Lim, C. S.; Choi, S. B.

    2018-03-01

    A feasibility work on the application of magneto-rheological elastomers (MREs) to automotive components, such as engine mounts is presented. While vehicle components require the high resonance frequency in terms of ride quality and handling, it is required to have the low resonance frequency to isolate the incoming vibration. With the conventional automotive technologies, it is challenging to combine these two conflicting performance trade-offs, ride quality including handling, and NVH (noise, vibration and harshness). Over the last decades, MREs, one of the new emerging smart materials, have been widely used to resolve this technical limitation. For example, an advanced engine mount was developed by using MRE to isolate the vibration transmitting from engines. In this paper, we will focus on rear cross member bushes, which is a key component for isolating the vibration from the road, and demonstrate their improved performance by utilizing MRE. The resonance frequency shift induced by the stiffness change of MRE will be presented through the frequency response functions estimated by simulation result.

  7. Dissociation of verbal working memory system components using a delayed serial recall task.

    Science.gov (United States)

    Chein, J M; Fiez, J A

    2001-11-01

    Functional magnetic resonance imaging (fMRI) was used to investigate the neural substrates of component processes in verbal working memory. Based on behavioral research using manipulations of verbal stimulus type to dissociate storage, rehearsal, and executive components of verbal working memory, we designed a delayed serial recall task requiring subjects to encode, maintain, and overtly recall sets of verbal items for which phonological similarity, articulatory length, and lexical status were manipulated. By using a task with temporally extended trials, we were able to exploit the temporal resolution afforded by fMRI to partially isolate neural contributions to encoding, maintenance, and retrieval stages of task performance. Several regions commonly associated with maintenance, including supplementary motor, premotor, and inferior frontal areas, were found to be active across all three trial stages. Additionally, we found that left inferior frontal and supplementary motor regions showed patterns of stimulus and temporal sensitivity implicating them in distinct aspects of articulatory rehearsal, while no regions showed a pattern of sensitivity consistent with a role in phonological storage. Regional modulation by task difficulty was further investigated as a measure of executive processing. We interpret our findings as they relate to notions about the cognitive architecture underlying verbal working memory performance.

  8. The relation between working memory components and ADHD symptoms from a developmental perspective.

    Science.gov (United States)

    Tillman, Carin; Eninger, Lilianne; Forssman, Linda; Bohlin, Gunilla

    2011-01-01

    The objective was to examine the relations between attention deficit hyperactivity disorder (ADHD) symptoms and four working memory (WM) components (short-term memory and central executive in verbal and visuospatial domains) in 284 6-16-year-old children from the general population. The results showed that verbal and visuospatial short-term memory and verbal central executive uniquely contributed to inattention symptoms. Age interacted with verbal short-term memory in predicting inattention, with the relation being stronger in older children. These findings support the notion of ADHD as a developmental disorder, with changes in associated neuropsychological deficits across time. The results further indicate ADHD-related deficits in several specific WM components.

  9. A meta-analysis of executive components of working memory.

    Science.gov (United States)

    Nee, Derek Evan; Brown, Joshua W; Askren, Mary K; Berman, Marc G; Demiralp, Emre; Krawitz, Adam; Jonides, John

    2013-02-01

    Working memory (WM) enables the online maintenance and manipulation of information and is central to intelligent cognitive functioning. Much research has investigated executive processes of WM in order to understand the operations that make WM "work." However, there is yet little consensus regarding how executive processes of WM are organized. Here, we used quantitative meta-analysis to summarize data from 36 experiments that examined executive processes of WM. Experiments were categorized into 4 component functions central to WM: protecting WM from external distraction (distractor resistance), preventing irrelevant memories from intruding into WM (intrusion resistance), shifting attention within WM (shifting), and updating the contents of WM (updating). Data were also sorted by content (verbal, spatial, object). Meta-analytic results suggested that rather than dissociating into distinct functions, 2 separate frontal regions were recruited across diverse executive demands. One region was located dorsally in the caudal superior frontal sulcus and was especially sensitive to spatial content. The other was located laterally in the midlateral prefrontal cortex and showed sensitivity to nonspatial content. We propose that dorsal-"where"/ventral-"what" frameworks that have been applied to WM maintenance also apply to executive processes of WM. Hence, WM can largely be simplified to a dual selection model.

  10. Vocabulary Learning in Primary School Children: Working Memory and Long-Term Memory Components

    Science.gov (United States)

    Morra, Sergio; Camba, Roberta

    2009-01-01

    The goal of this study was to investigate which working memory and long-term memory components predict vocabulary learning. We used a nonword learning paradigm in which 8- to 10-year-olds learned picture-nonword pairs. The nonwords varied in length (two vs. four syllables) and phonology (native sounding vs. including one Russian phoneme). Short,…

  11. The role of working memory sub-components in food choice and dieting success.

    Science.gov (United States)

    Whitelock, Victoria; Nouwen, Arie; van den Akker, Olga; Higgs, Suzanne

    2018-05-01

    Evidence suggests a role for self-reported working memory (WM) in self-reported food intake, but it is not known which WM sub-components are involved. It is also important to consider how individual differences in dietary restraint and disinhibition influence WM and the impact of this on food choice. The current study assessed the relationship between WM sub-components and food choice, using computerised measures of WM sub-components and a direct assessment of food intake. The role of dieting success (measured by restraint and disinhibition) as a distal predictor of food choice that influences food choices via WM, and the role of WM more generally in dieting success were investigated. Female undergraduate students (N = 117, mean age: 18.9 years, mean BMI: 21.6 kg/m 2 ) completed computer tasks assessing three components of WM (updating, phonological loop and visuospatial sketchpad) and a snack food taste-test. Greater visuospatial WM span was associated with a higher (lower) percentage of food intake that was low (high) energy dense. It was also found that unsuccessful dieters (high restraint, high disinhibition) had poorer visuospatial WM span and consumed a lower (higher) percentage of low (high) energy dense food. Visuospatial WM span significantly mediated the relationship between dieting success and percentage of low energy dense food intake. Further, dietary restraint was associated with poorer updating ability, irrespective of disinhibition. These findings suggest that better visuospatial WM is associated with a greater (reduced) preference for low (high) energy dense foods, and that deficits in visuospatial WM may undermine dieting attempts. Future work should assess whether the ability to deal with food cravings mediates the relationship between visuospatial WM and dieting success and investigate how WM may influence the mechanisms underlying behavioural control. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. The components of working memory updating: an experimental decomposition and individual differences

    OpenAIRE

    Ecker, U K H; Lewandowsky, S; Oberauer, Klaus; Chee, A E H

    2010-01-01

    Working memory updating (WMU) has been identified as a cognitive function of prime importance for everyday tasks and has also been found to be a significant predictor of higher mental abilities. Yet, little is known about the constituent processes of WMU. We suggest that operations required in a typical WMU task can be decomposed into 3 major component processes: retrieval, transformation, and substitution. We report a large-scale experiment that instantiated all possible combinat...

  13. Component deficits of visual neglect: "Magnetic" attraction of attention vs. impaired spatial working memory.

    Science.gov (United States)

    Toba, Monica N; Rabuffetti, Marco; Duret, Christophe; Pradat-Diehl, Pascale; Gainotti, Guido; Bartolomeo, Paolo

    2018-01-31

    Visual neglect is a disabling consequence of right hemisphere damage, whereby patients fail to detect left-sided objects. Its precise mechanisms are debated, but there is some consensus that distinct component deficits may variously associate and interact in different patients. Here we used a touch-screen based procedure to study two putative component deficits of neglect, rightward "magnetic" attraction of attention and impaired spatial working memory, in a group of 47 right brain-damaged patients, of whom 33 had signs of left neglect. Patients performed a visual search task on three distinct conditions, whereby touched targets could (1) be tagged, (2) disappear or (3) show no change. Magnetic attraction of attention was defined as more left neglect on the tag condition than on the disappear condition, where right-sided disappeared targets could not capture patients' attention. Impaired spatial working memory should instead produce more neglect on the no change condition, where no external cue indicated that a target had already been explored, than on the tag condition. Using a specifically developed analysis algorithm, we identified significant differences of performance between the critical conditions. Neglect patients as a group performed better on the disappear condition than on the no change condition and also better in the tag condition comparing with the no change condition. No difference was found between the tag condition and the disappear condition. Some of our neglect patients had dissociated patterns of performance, with predominant magnetic attraction or impaired spatial working memory. Anatomical results issued from both grey matter analysis and fiber tracking were consistent with the typical patterns of fronto-parietal and occipito-frontal disconnection in neglect, but did not identify lesional patterns specifically associated with one or another deficit, thus suggesting the possible co-localization of attentional and working memory processes in

  14. [WMN: a negative ERPs component related to working memory during non-target visual stimuli processing].

    Science.gov (United States)

    Zhao, Lun; Wei, Jin-he

    2003-10-01

    To study non-target stimuli processing in the brain. Features of the event-related potentials (ERPs) from non-target stimuli during selective response task (SR) was compared with that during visual selective discrimination (DR) task in 26 normal subjects. The stimuli consisted of two color LED flashes (red and green) appeared randomly in left (LVF) or right (RVF) visual field with same probability. ERPs were derived at 9 electrode sites on the scalp under 2 task conditions: a) SR, making switch response to the target (NT) stimuli from LVF or RVF in one direction and making no response to the non-target (NT) ones; b) DR, making switching response to T stimuli differentially, i.e., to the left for T from LVF and to the right for T from RVF. 1) the non-target stimuli in DR conditions, compared with that in SR condition, elicited smaller P2 and P3 components and larger N2 component at the frontal brain areas; 2) a significant negative component, named as WMN (working memory negativity), appeared in the non-target ERPs during DR in the period of 100 to 700 ms post stimulation which was predominant at the frontal brain areas. According to the major difference between brain activities for non-target stimuli during SR and DR, the predominant appearance of WMN at the frontal brain areas demonstrated that the non-target stimulus processing was an active process and was related to working memory, i.e., the temporary elimination and the retrieval of the response mode which was stored in working memory.

  15. Performance analysis a of solar driven organic Rankine cycle using multi-component working fluids

    DEFF Research Database (Denmark)

    Baldasso, E.; Andreasen, J. G.; Modi, A.

    2015-01-01

    suitable control strategy and both the overall annual production and the average solar to electrical efficiency are estimated with an annual simulation. The results suggest that the introduction of binary working fluids enables to increase the solar system performance both in design and part-load operation....... cycle. The purpose of this paper is to optimize a low temperature organic Rankine cycle tailored for solar applications. The objective of the optimization is the maximization of the solar to electrical efficiency and the optimization parameters are the working fluid and the turbine inlet temperature...... and pressure. Both pure fluids and binary mixtures are considered as possible working fluids and thus one of the primary aims of the study is to evaluate whether the use of multi-component working fluids might lead to increased solar to electrical efficiencies. The considered configuration includes a solar...

  16. Estimation and correlation of strengthening components to the evolution of microstructure following cold work and articial aging in AA6111 aluminium

    International Nuclear Information System (INIS)

    Quainoo, G K; Yannacopoulos, S; Sargent, C M

    2010-01-01

    In this study, the contributions of the various strengthening components following the application of cold work and precipitation in AA6111 has been evaluated and correlated by means of tensile testing and transmission electron microscopy (TEM). The results show a considerable improvement in yield and tensile strength with increasing level of cold work. The component of strength developed from cold work and precipitation respectively increases with increasing level of cold work. The recovery strength (softening) also increases with increasing level of cold work. TEM showed a strong interaction of strengthening precipitates with dislocations. The density of dislocation tangles is shown to increase with increasing degree of cold work.

  17. Rehabilitation of the central executive component of working memory: a re-organisation approach applied to a single case.

    Science.gov (United States)

    Duval, J; Coyette, F; Seron, X

    2008-08-01

    This paper describes and evaluates a programme of neuropsychological rehabilitation which aims to improve three sub-components of the working memory central executive: processing load, updating and dual-task monitoring, by the acquisition of three re-organisation strategies (double coding, serial processing and speed reduction). Our programme has two stages: cognitive rehabilitation (graduated exercises subdivided into three sub-programmes each corresponding to a sub-component) which enables the patient to acquire the three specific strategies; and an ecological rehabilitation, including analyses of scenarios and simulations of real-life situations, which aims to transfer the strategies learned to everyday life. The programme also includes information meetings. It was applied to a single case who had working memory deficits after a surgical operation for a cerebral tumour on his left internal temporal ganglioglioma. Multiple baseline tests were used to measure the effectiveness of the rehabilitation. The programme proved to be effective for all three working memory components; a generalisation of its effects to everyday life was observed, and the effects were undiminished three months later.

  18. Fractionating the neural correlates of individual working memory components underlying arithmetic problem solving skills in children

    Science.gov (United States)

    Metcalfe, Arron W. S.; Ashkenazi, Sarit; Rosenberg-Lee, Miriam; Menon, Vinod

    2013-01-01

    Baddeley and Hitch’s multi-component working memory (WM) model has played an enduring and influential role in our understanding of cognitive abilities. Very little is known, however, about the neural basis of this multi-component WM model and the differential role each component plays in mediating arithmetic problem solving abilities in children. Here, we investigate the neural basis of the central executive (CE), phonological (PL) and visuo-spatial (VS) components of WM during a demanding mental arithmetic task in 7–9 year old children (N=74). The VS component was the strongest predictor of math ability in children and was associated with increased arithmetic complexity-related responses in left dorsolateral and right ventrolateral prefrontal cortices as well as bilateral intra-parietal sulcus and supramarginal gyrus in posterior parietal cortex. Critically, VS, CE and PL abilities were associated with largely distinct patterns of brain response. Overlap between VS and CE components was observed in left supramarginal gyrus and no overlap was observed between VS and PL components. Our findings point to a central role of visuo-spatial WM during arithmetic problem-solving in young grade-school children and highlight the usefulness of the multi-component Baddeley and Hitch WM model in fractionating the neural correlates of arithmetic problem solving during development. PMID:24212504

  19. Fractionating the neural correlates of individual working memory components underlying arithmetic problem solving skills in children.

    Science.gov (United States)

    Metcalfe, Arron W S; Ashkenazi, Sarit; Rosenberg-Lee, Miriam; Menon, Vinod

    2013-10-01

    Baddeley and Hitch's multi-component working memory (WM) model has played an enduring and influential role in our understanding of cognitive abilities. Very little is known, however, about the neural basis of this multi-component WM model and the differential role each component plays in mediating arithmetic problem solving abilities in children. Here, we investigate the neural basis of the central executive (CE), phonological (PL) and visuo-spatial (VS) components of WM during a demanding mental arithmetic task in 7-9 year old children (N=74). The VS component was the strongest predictor of math ability in children and was associated with increased arithmetic complexity-related responses in left dorsolateral and right ventrolateral prefrontal cortices as well as bilateral intra-parietal sulcus and supramarginal gyrus in posterior parietal cortex. Critically, VS, CE and PL abilities were associated with largely distinct patterns of brain response. Overlap between VS and CE components was observed in left supramarginal gyrus and no overlap was observed between VS and PL components. Our findings point to a central role of visuo-spatial WM during arithmetic problem-solving in young grade-school children and highlight the usefulness of the multi-component Baddeley and Hitch WM model in fractionating the neural correlates of arithmetic problem solving during development. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. Maintenance and manipulation of information in schizophrenia: further evidence for impairment in the central executive component of working memory.

    Science.gov (United States)

    Kim, Junghoon; Glahn, David C; Nuechterlein, Keith H; Cannon, Tyrone D

    2004-06-01

    Impairments in working memory (WM) have been proposed to underlie various cognitive and functional impairments in schizophrenia. However, the nature and extent of the dysfunction remain unclear. The present study attempted to examine the integrity of sub-components of working memory in schizophrenia within the framework of the multiple-component working memory model proposed by Baddeley. Two sets of visuospatial and verbal delayed-response tasks were developed which had comparable formats and difficulties across domains. In Experiment 1, demands on the central executive (CE) were manipulated by requiring subjects either (1) to simultaneously maintain and transform information (maintenance-and-manipulation condition) or (2) just to maintain this information (maintenance-only condition). In Experiment 2, the amount of information to be maintained over the delay was parametrically varied to evaluate demands on the temporary maintenance component of working memory. Patients (N=16) performed worse than controls (N=16) in both conditions of Experiment 1; however, simultaneous maintenance and manipulation was associated with a significantly greater performance reduction in the patients. In Experiment 2, both patients (N=15) and controls (N=15) declined in performance, at equivalent rates, with increasing memory load. Parallel findings were observed for the verbal and visuospatial tasks. These results suggest that while both maintenance and central executive aspects of working memory are impaired in schizophrenic patients, the central executive may be more severely affected.

  1. Assessment of Working Memory Components at 6 Years of Age as Predictors of Reading Achievements a Year Later

    Science.gov (United States)

    Nevo, Einat; Breznitz, Zvia

    2011-01-01

    The ability of working memory skills (measured by tasks assessing all four working memory components), IQ, language, phonological awareness, literacy, rapid naming, and speed of processing at 6 years of age, before reading was taught, to predict reading abilities (decoding, reading comprehension, and reading time) a year later was examined in 97…

  2. Assessment of working memory components at 6years of age as predictors of reading achievements a year later.

    Science.gov (United States)

    Nevo, Einat; Breznitz, Zvia

    2011-05-01

    The ability of working memory skills (measured by tasks assessing all four working memory components), IQ, language, phonological awareness, literacy, rapid naming, and speed of processing at 6years of age, before reading was taught, to predict reading abilities (decoding, reading comprehension, and reading time) a year later was examined in 97 children. Among all working memory components, phonological complex memory contributed most to predicting all three reading abilities. A capacity measure of phonological complex memory, based on passing a minimum threshold in those tasks, contributed to the explained variance of decoding and reading comprehension. Findings suggest that a minimal ability of phonological complex memory is necessary for children to attain a normal reading level. Adding assessment of phonological complex memory, before formal teaching of reading begins, to more common measures might better estimate children's likelihood of future academic success. Copyright © 2010 Elsevier Inc. All rights reserved.

  3. Working apart together: foundations for component groupware

    NARCIS (Netherlands)

    ter Hofte, H.; ter Hofte, Gerard Henri

    1998-01-01

    This thesis is the culmination of five years of Working Apart Together. As a research theme, it struck me in 1993 that Working Apart Together was not only a way of working that groupware systems were designed to support, but also a principle that could be applied within the groupware systems

  4. The sensory components of high-capacity iconic memory and visual working memory.

    Science.gov (United States)

    Bradley, Claire; Pearson, Joel

    2012-01-01

    EARLY VISUAL MEMORY CAN BE SPLIT INTO TWO PRIMARY COMPONENTS: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more "high-level" alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their characteristics. Here, we used a purely sensory paradigm to examine visual short-term memory for 10 homogeneous items of three different visual features (color, orientation and motion) across a range of durations from 0 to 6 s. We found that the amount of information stored in iconic memory is smaller for motion than for color or orientation. Performance declined exponentially with longer storage durations and reached chance levels after ∼2 s. Further experiments showed that performance for the 10 items at 1 s was contingent on unperturbed attentional resources. In addition, for orientation stimuli, performance was contingent on the location of stimuli in the visual field, especially for short cue delays. Overall, our results suggest a smooth transition between an automatic, high-capacity, feature-specific sensory-iconic memory, and an effortful "lower-capacity" visual working memory.

  5. The sensory components of high-capacity iconic memory and visual working memory

    Directory of Open Access Journals (Sweden)

    Claire eBradley

    2012-09-01

    Full Text Available Early visual memory can be split into two primary components: a high-capacity, short-lived iconic memory followed by a limited-capacity visual working memory that can last many seconds. Whereas a large number of studies have investigated visual working memory for low-level sensory features, much research on iconic memory has used more high-level alphanumeric stimuli such as letters or numbers. These two forms of memory are typically examined separately, despite an intrinsic overlap in their characteristics. Here, we used a purely sensory paradigm to examine visual short-term memory for 10 homogeneous items of 3 different visual features (colour, orientation and motion across a range of durations from 0 to 6 seconds. We found that the amount of information stored in iconic memory is smaller for motion than for colour or orientation. Performance declined exponentially with longer storage durations and reached chance levels after ~2 seconds. Further experiments showed that performance for the 10 items at 1 second was contingent on unperturbed attentional resources. In addition, for orientation stimuli, performance was contingent on the location of stimuli in the visual field, especially for short cue delays. Overall, our results suggest a smooth transition between an automatic, high-capacity, feature-specific sensory-iconic memory and an effortful ‘lower-capacity’ visual working memory.

  6. Interim Report on Metallic Component Margins Under High Seismic Loads. Survey of Existing Practices and Status of Benchmark Work

    International Nuclear Information System (INIS)

    2015-01-01

    OECD/NEA/CSNI Working Group on Integrity and Ageing of Components and Structures (WGIAGE) has the main mission to advance the current understanding of those aspects relevant to ensuring the integrity of structures, systems and components under design and beyond design loads, to provide guidance in choosing the optimal ways of dealing with challenges to the integrity of operating as well as new nuclear power plants, and to make use of an integrated approach to design, safety and plant life management. The activity (CAPS) of the WGIAGE group, entitled 'Metallic Component Margins under High Seismic Loads (MECOS)', was initially proposed by the metal sub-group of WGIAGE and approved by the CSNI in June 2012 as a Fukushima activity (F-CAPS). The proposal is aimed to assess the consequences of external hazards on plant safety. The main objectives of the MECOS project were to quantify the existing margins in seismic analysis of safety class components for high seismic loads and assess the existing design practices within a benchmark activity. The first phase of MECOS work included a survey on the existing seismic regulations and design analysis methods in the member countries. The survey was conducted by means of a questionnaire and a total of 24 questions were asked. The questionnaire consists of three parts: Seismic Input, Seismic Design Basis, and Beyond Seismic Design Basis. The majority of the respondents use the Standard or Modified Shape Spectrum and only a few countries are using the Uniform Seismic Hazard Spectra (UHS) in their seismic design regulations. All of the respondents have minimum seismic demand in their national or adopted standards. The number of defined and used seismic levels for the design of mechanical components is one or two. Almost all of the respondents are using combined testing and analysis methods for seismic qualification and design. Some countries (e.g. Canada, Finland, USA, France, Japan and UK) have specific requirements for

  7. Working hours and incidence of metabolic syndrome and its components in a Mediterranean cohort: the SUN project.

    Science.gov (United States)

    Pimenta, Adriano M; Bes-Rastrollo, Maira; Sayon-Orea, Carmen; Gea, Alfredo; Aguinaga-Ontoso, Enrique; Lopez-Iracheta, Roberto; Martinez-Gonzalez, Miguel A

    2015-08-01

    Metabolic syndrome (MetS) is an important and priority public health problem globally. Long working hours have been proposed as a modifiable risk factor for MetS, despite sparse epidemiological evidence. Thus, the aim of this study was to prospectively evaluate the associations between working hours and incidence of MetS and each of its components. We assessed 6845 participants of a Spanish dynamic prospective cohort of university graduates (the SUN project), initially free of any specific criteria of MetS, and followed-up for a median of 8.3 years. Weekly working hours were collected at baseline and grouped into four categories: >0-24, 25-39, 40-49 and ≥50 h. MetS was defined according to the updated harmonizing criteria. We estimated multivariable adjusted Relative Risks (RR) of MetS and their 95% Confidence Intervals (95% CI), using Poisson regression models. The cumulative incidence of MetS was 6.0%. Working hours were not independently related to MetS (25-39 h/week = RR: 1.42, 95% CI 0.90-2.25; 40-49 h/week = RR: 1.45, 95% CI 0.91-2.30; ≥50 h/week = RR: 1.49, 95% CI 0.91-2.42, P for trend = 0.235) nor to any of its individual definition criteria. Our findings do not suggest that long working hours increase the risk of MetS development or each of its components. Further longitudinal studies in general population should be conducted to confirm these results. © The Author 2015. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  8. Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

    OpenAIRE

    Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2013-01-01

    Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workpl...

  9. Work stress: its components and its association with self-reported health outcomes in a garment factory in Bangladesh-Findings from a cross-sectional study.

    Science.gov (United States)

    Steinisch, Maria; Yusuf, Rita; Li, Jian; Rahman, Omar; Ashraf, Hasan M; Strümpell, Christian; Fischer, Joachim E; Loerbroks, Adrian

    2013-11-01

    Bangladesh is one of the leading exporters of ready-made garments (RMG) worldwide producing at very low cost almost exclusively for Western markets. Empirical evidence on psychologically adverse working conditions and their association with health in the RMG setting remains sparse. Drawing on insights from previous ethnographic research, we conducted a cross-sectional epidemiological study among 332 RMG workers in Dhaka, Bangladesh. High work-related demands and poor interpersonal resources represented key components of work stress and were important determinants of poor health. The key work stress components observed in this study partly differed from those identified in Western work place settings. © 2013 The Authors. Published by Elsevier Ltd. All rights reserved.

  10. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  11. Associations of Extrinsic and Intrinsic Components of Work Stress with Health: A Systematic Review of Evidence on the Effort-Reward Imbalance Model.

    Science.gov (United States)

    Siegrist, Johannes; Li, Jian

    2016-04-19

    Mainstream psychological stress theory claims that it is important to include information on people's ways of coping with work stress when assessing the impact of stressful psychosocial work environments on health. Yet, some widely used respective theoretical models focus exclusively on extrinsic factors. The model of effort-reward imbalance (ERI) differs from them as it explicitly combines information on extrinsic and intrinsic factors in studying workers' health. As a growing number of studies used the ERI model in recent past, we conducted a systematic review of available evidence, with a special focus on the distinct contribution of its intrinsic component, the coping pattern "over-commitment", towards explaining health. Moreover, we explore whether the interaction of intrinsic and extrinsic components exceeds the size of effects on health attributable to single components. Results based on 51 reports document an independent explanatory role of "over-commitment" in explaining workers' health in a majority of studies. However, support in favour of the interaction hypothesis is limited and requires further exploration. In conclusion, the findings of this review support the usefulness of a work stress model that combines extrinsic and intrinsic components in terms of scientific explanation and of designing more comprehensive worksite stress prevention programs.

  12. Associations of Extrinsic and Intrinsic Components of Work Stress with Health: A Systematic Review of Evidence on the Effort-Reward Imbalance Model

    Directory of Open Access Journals (Sweden)

    Johannes Siegrist

    2016-04-01

    Full Text Available Mainstream psychological stress theory claims that it is important to include information on people’s ways of coping with work stress when assessing the impact of stressful psychosocial work environments on health. Yet, some widely used respective theoretical models focus exclusively on extrinsic factors. The model of effort-reward imbalance (ERI differs from them as it explicitly combines information on extrinsic and intrinsic factors in studying workers’ health. As a growing number of studies used the ERI model in recent past, we conducted a systematic review of available evidence, with a special focus on the distinct contribution of its intrinsic component, the coping pattern “over-commitment”, towards explaining health. Moreover, we explore whether the interaction of intrinsic and extrinsic components exceeds the size of effects on health attributable to single components. Results based on 51 reports document an independent explanatory role of “over-commitment” in explaining workers’ health in a majority of studies. However, support in favour of the interaction hypothesis is limited and requires further exploration. In conclusion, the findings of this review support the usefulness of a work stress model that combines extrinsic and intrinsic components in terms of scientific explanation and of designing more comprehensive worksite stress prevention programs.

  13. Associations of Extrinsic and Intrinsic Components of Work Stress with Health: A Systematic Review of Evidence on the Effort-Reward Imbalance Model

    Science.gov (United States)

    Siegrist, Johannes; Li, Jian

    2016-01-01

    Mainstream psychological stress theory claims that it is important to include information on people’s ways of coping with work stress when assessing the impact of stressful psychosocial work environments on health. Yet, some widely used respective theoretical models focus exclusively on extrinsic factors. The model of effort-reward imbalance (ERI) differs from them as it explicitly combines information on extrinsic and intrinsic factors in studying workers’ health. As a growing number of studies used the ERI model in recent past, we conducted a systematic review of available evidence, with a special focus on the distinct contribution of its intrinsic component, the coping pattern “over-commitment”, towards explaining health. Moreover, we explore whether the interaction of intrinsic and extrinsic components exceeds the size of effects on health attributable to single components. Results based on 51 reports document an independent explanatory role of “over-commitment” in explaining workers’ health in a majority of studies. However, support in favour of the interaction hypothesis is limited and requires further exploration. In conclusion, the findings of this review support the usefulness of a work stress model that combines extrinsic and intrinsic components in terms of scientific explanation and of designing more comprehensive worksite stress prevention programs. PMID:27104548

  14. Working memory components that predict word problem solving: Is it merely a function of reading, calculation, and fluid intelligence?

    Science.gov (United States)

    Fung, Wenson; Swanson, H Lee

    2017-07-01

    The purpose of this study was to assess whether the differential effects of working memory (WM) components (the central executive, phonological loop, and visual-spatial sketchpad) on math word problem-solving accuracy in children (N = 413, ages 6-10) are completely mediated by reading, calculation, and fluid intelligence. The results indicated that all three WM components predicted word problem solving in the nonmediated model, but only the storage component of WM yielded a significant direct path to word problem-solving accuracy in the fully mediated model. Fluid intelligence was found to moderate the relationship between WM and word problem solving, whereas reading, calculation, and related skills (naming speed, domain-specific knowledge) completely mediated the influence of the executive system on problem-solving accuracy. Our results are consistent with findings suggesting that storage eliminates the predictive contribution of executive WM to various measures Colom, Rebollo, Abad, & Shih (Memory & Cognition, 34: 158-171, 2006). The findings suggest that the storage component of WM, rather than the executive component, has a direct path to higher-order processing in children.

  15. Ninth regular meeting of the International Working Group on Reliability of Reactor Pressure Components, Vienna, 18-20 October 1988

    International Nuclear Information System (INIS)

    1990-04-01

    The 9th regular meeting of the International Working Group on Reliability of Pressure Components took place from 18-20 October 1988 at the Agency's Headquarters. The meeting was attended by 25 representatives from 19 Member States and International Organizations. The agenda of the meeting included overviews of the national activities in the field of pressure retaining components of PWRs, review of the past IWGRRPC activities and updating of the working plan for years 1989-1992. A great deal of attention was paid to the involvement of the IWGRRPC in the Agency's programme on nuclear power plant ageing and life extension. Members of the IWGRRPC reviewed the long term plan of the activities and proposed a provisional list and scope of the IAEA Specialists' Meetings planned for the period 1989-1992. Seventeen papers were presented at the meeting. A separate abstract was prepared for each of these papers. Refs, figs and tabs

  16. Usefulness of creep work-time relation for determining stress intensity limit of high-temperature components

    International Nuclear Information System (INIS)

    Kim, Woo Gon; Ryu, Woo Seog; Lee, Kyung Yong

    2003-01-01

    In order to determine creep stress intensity limit of high-temperature components, the usefulness of the creep work and time equation, defined as W c t p = B (where W c = σ ε is the total creep work done during creep, and p and B are constants), was investigated using the experimental data. For this purpose, the creep tests for generating 1.0% strain for commercial type 316 stainless steel were conducted with different stresses; 160 MPa, 150 MPa, 145 MPa, 140 MPa and 135 MPa at 593 .deg. C. The plots of log W c - log t showed a good linear relation up to 10 5 hr, and the results of the creep work-time relation for p, B and stress intensity values showed good agreement to those of Isochronous Stress-Strain Curves (ISSC) presented in ASME BPV NH. The relation can be simply obtained with only several short-term 1% strain data without ISSC which can be obtained by long-term creep data. Particularly, this relation is useful in estimating stress intensity limit for new and emerging class of high-temperature creeping materials

  17. Constructing a working taxonomy of functional Ada software components for real-time embedded system applications

    Science.gov (United States)

    Wallace, Robert

    1986-01-01

    A major impediment to a systematic attack on Ada software reusability is the lack of an effective taxonomy for software component functions. The scope of all possible applications of Ada software is considered too great to allow the practical development of a working taxonomy. Instead, for the purposes herein, the scope of Ada software application is limited to device and subsystem control in real-time embedded systems. A functional approach is taken in constructing the taxonomy tree for identified Ada domain. The use of modular software functions as a starting point fits well with the object oriented programming philosophy of Ada. Examples of the types of functions represented within the working taxonomy are real time kernels, interrupt service routines, synchronization and message passing, data conversion, digital filtering and signal conditioning, and device control. The constructed taxonomy is proposed as a framework from which a need analysis can be performed to reveal voids in current Ada real-time embedded programming efforts for Space Station.

  18. Computer analysis of an adiabatic Stirling cryocooler using a two-phase two-component working fluid

    International Nuclear Information System (INIS)

    Renfroe, D.A.; Cheung, C.M.

    1992-01-01

    This paper describes the performance and behavior of a Stirling cyrocooler incorporating a working fluid composed of helium and nitrogen. At the operating temperature of the cryocooler (80 K), the nitrogen component will condense in the freezer section. It is shown that the phase change in the working fluid increased the heat lifted for a given size and weight of machine and the coefficient of performance. The magnitude of these effects was dependent on the mass ratio of nitrogen to helium, phase angle between the compression and expansion processes, and the ratio of the compression space volume to the expansion space volume. The optimum heat lifted performance was obtained for a mass ratio of four parts of nitrogen to one part of helium, a phase angle of approximately 100 degrees, and a volume ratio of two which resulted in a heat lifted increase of 75% over the single phase, 90 degree phase angle configuration. The coefficient of performance showed a 20% improvement

  19. Impact of the amount of working fluid in loop heat pipe to remove waste heat from electronic component

    Directory of Open Access Journals (Sweden)

    Smitka Martin

    2014-03-01

    Full Text Available One of the options on how to remove waste heat from electronic components is using loop heat pipe. The loop heat pipe (LHP is a two-phase device with high effective thermal conductivity that utilizes change phase to transport heat. It was invented in Russia in the early 1980’s. The main parts of LHP are an evaporator, a condenser, a compensation chamber and a vapor and liquid lines. Only the evaporator and part of the compensation chamber are equipped with a wick structure. Inside loop heat pipe is working fluid. As a working fluid can be used distilled water, acetone, ammonia, methanol etc. Amount of filling is important for the operation and performance of LHP. This work deals with the design of loop heat pipe and impact of filling ratio of working fluid to remove waste heat from insulated gate bipolar transistor (IGBT.

  20. Investigations of an excimer laser working with a four-component gaseous mixture He-Kr:Xe-HCl

    Science.gov (United States)

    Iwanejko, Leszek; Pokora, Ludwik J.

    1991-08-01

    The paper presnts working conditions of an XCI excimer laser untypical gas mixture based on KrzXe instead of pure Xe. Such a choice was influenced by the necessity of Findin9 the way to replace imported and expensive Xe by gaseous components accesible in Poland. Determining the range of changes of laser extrnal parameters which enables its proper work with the new gas mixture was the aim of same investigations results of which are presented in this paper. The laser pulse output energy and the pulse duration as a Function of supply voltage and the mixture composition are presented. The range of proper conditions for the laser working with the new mixture He-Kr:Xe--HC1 was determined. The analysis of experimental results showed that using the new mixture ensures value of energy and pulse duration comparable with the ones obtained for the mixture He-''Xe--HCl. Spectral investigations showed the lack of influence of Kr presence in the mixture on the generation spectrum of the laser. L.

  1. Status of design code work for metallic high temperature components

    International Nuclear Information System (INIS)

    Bieniussa, K.; Seehafer, H.J.; Over, H.H.; Hughes, P.

    1984-01-01

    The mechanical components of high temperature gas-cooled reactors, HTGR, are exposed to temperatures up to about 1000 deg. C and this in a more or less corrosive gas environment. Under these conditions metallic structural materials show a time-dependent structural behavior. Furthermore changes in the structure of the material and loss of material in the surface can result. The structural material of the components will be stressed originating from load-controlled quantities, for example pressure or dead weight, and/or deformation-controlled quantities, for example thermal expansion or temperature distribution, and thus it can suffer rowing permanent strains and deformations and an exhaustion of the material (damage) both followed by failure. To avoid a failure of the components the design requires the consideration of the following structural failure modes: ductile rupture due to short-term loadings; creep rupture due to long-term loadings; reep-fatigue failure due to cyclic loadings excessive strains due to incremental deformation or creep ratcheting; loss of function due to excessive deformations; loss of stability due to short-term loadings; loss of stability due to long-term loadings; environmentally caused material failure (excessive corrosion); fast fracture due to instable crack growth

  2. Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company

    Science.gov (United States)

    Yahya, N. M.; Zahid, M. N. O.

    2018-03-01

    This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.

  3. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials: The OMERACT Safety Working Group.

    Science.gov (United States)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E; Devoe, Dan; Williamson, Paula; Terwee, Caroline B; Suarez-Almazor, Maria E; Strand, Vibeke; Woodworth, Thasia; Leong, Amye L; Goel, Niti; Boers, Maarten; Brooks, Peter M; Simon, Lee S; Christensen, Robin

    2017-12-01

    Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. The safety issue has previously been discussed at OMERACT, but without a consistent approach to ensure harms were included in COS. Our methods include (1) identifying harmful outcomes in trials of interventions studied in patients with rheumatic diseases by a systematic literature review, (2) identifying components of safety that should be measured in such trials by use of a patient-driven approach including qualitative data collection and statistical organization of data, and (3) developing a COS through consensus processes including everyone involved. Members of OMERACT including patients, clinicians, researchers, methodologists, and industry representatives reached consensus on the need to continue the efforts on developing a COS for safety in rheumatology trials. There was a general agreement about the need to identify safety-related outcomes that are meaningful to patients, framed in terms that patients consider relevant so that they will be able to make informed decisions. The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach.

  4. Web components and the semantic web

    OpenAIRE

    Casey, Maire; Pahl, Claus

    2003-01-01

    Component-based software engineering on the Web differs from traditional component and software engineering. We investigate Web component engineering activites that are crucial for the development,com position, and deployment of components on the Web. The current Web Services and Semantic Web initiatives strongly influence our work. Focussing on Web component composition we develop description and reasoning techniques that support a component developer in the composition activities,fo cussing...

  5. Improving the Psychosocial Work Environment at Multi-Ethnic Workplaces: A Multi-Component Intervention Strategy in the Cleaning Industry

    Directory of Open Access Journals (Sweden)

    Mari-Ann Flyvholm

    2013-10-01

    Full Text Available Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

  6. Improving the psychosocial work environment at multi-ethnic workplaces: a multi-component intervention strategy in the cleaning industry.

    Science.gov (United States)

    Smith, Louise Hardman; Hviid, Kirsten; Frydendall, Karen Bo; Flyvholm, Mari-Ann

    2013-10-14

    Global labour migration has increased in recent years and immigrant workers are often recruited into low status and low paid jobs such as cleaning. Research in a Danish context shows that immigrants working in the cleaning industry often form social networks based on shared languages and backgrounds, and that conflict between different ethnic groups may occur. This paper evaluates the impact of a multi-component intervention on the psychosocial work environment at a multi-ethnic Danish workplace in the cleaning sector. The intervention included Danish lessons, vocational training courses, and activities to improve collaboration across different groups of cleaners. Interviews about the outcome of the intervention were conducted with the cleaners and their supervisor. The Copenhagen Psychosocial Questionnaire was used as a supplement to the interviews. The results suggest that the psychosocial work environment had improved after the intervention. According to the interviews with the cleaners, the intervention had led to improved communication, trust, and collaboration. These findings are supported by the questionnaire where social support from supervisor and colleagues, social community, trust, and teamwork seem to have improved together with meaning of work, rewards, and emotional demands. The design of the intervention may provide inspiration for future psychosocial work environment interventions at multi-ethnic work places.

  7. Performance Engineering Technology for Scientific Component Software

    Energy Technology Data Exchange (ETDEWEB)

    Malony, Allen D.

    2007-05-08

    Large-scale, complex scientific applications are beginning to benefit from the use of component software design methodology and technology for software development. Integral to the success of component-based applications is the ability to achieve high-performing code solutions through the use of performance engineering tools for both intra-component and inter-component analysis and optimization. Our work on this project aimed to develop performance engineering technology for scientific component software in association with the DOE CCTTSS SciDAC project (active during the contract period) and the broader Common Component Architecture (CCA) community. Our specific implementation objectives were to extend the TAU performance system and Program Database Toolkit (PDT) to support performance instrumentation, measurement, and analysis of CCA components and frameworks, and to develop performance measurement and monitoring infrastructure that could be integrated in CCA applications. These objectives have been met in the completion of all project milestones and in the transfer of the technology into the continuing CCA activities as part of the DOE TASCS SciDAC2 effort. In addition to these achievements, over the past three years, we have been an active member of the CCA Forum, attending all meetings and serving in several working groups, such as the CCA Toolkit working group, the CQoS working group, and the Tutorial working group. We have contributed significantly to CCA tutorials since SC'04, hosted two CCA meetings, participated in the annual ACTS workshops, and were co-authors on the recent CCA journal paper [24]. There are four main areas where our project has delivered results: component performance instrumentation and measurement, component performance modeling and optimization, performance database and data mining, and online performance monitoring. This final report outlines the achievements in these areas for the entire project period. The submitted progress

  8. Thermal cycling in LWR components in OECD-NEA member countries - CSNI integrity and ageing working group

    International Nuclear Information System (INIS)

    Faidy, Claude; Chapuliot, Stephane; Mathet, Eric

    2005-01-01

    Thermal cycling is a widespread and recurring problem in nuclear power plants worldwide. Several incidents with leakage of primary water inside the containment challenged the integrity of NPPs although no release outside of containment occurred. Thermal cycling was not taken into account at the design stage. Regulatory bodies, utilities and researchers have to address it for their operating plants. It is a complex phenomenon that involves and links thermal hydraulic, fracture mechanic, materials and plant operation. Thermal cycling is connected either to operating transients (low cycle fatigue) or to complex phenomenon like stratification, vortex and mixing (low and high cycle fatigue). The former is covered by existing rules and codes. The latter is partially addressed by national rules and constitutes the subject of this report. In 2002, the Committee on the Safety of Nuclear Installations (CSNI) requested the working group on the integrity of reactor components and structures (IAGE WG) to prepare a program of work on thermal cycling to provide information to NEA member countries on operational experience, regulatory policies, countermeasures in place, current status of research and development, and to identify areas where research is needed both at national and international levels. The working group proposed a 3 fold program that covered: - Review of operating experience, regulatory framework, countermeasures and current research; - Benchmark to assess calculation capabilities in NEA member countries for crack initiation and propagation under a cyclic thermal loading, and ultimately to develop screening criteria to identify susceptible components; results of the benchmark were published in 2005; - Organisation of an international conference in cooperation with the EPRI and the USNRC on fatigue of reactor components. This conference reviews progress in the areas and provides a forum for discussion and exchange of information between high level experts. The

  9. Job satisfaction, occupational stress, burnout and work engagement as components of work-related wellbeing

    Directory of Open Access Journals (Sweden)

    Sebastiaan Rothmann

    2008-11-01

    Full Text Available The objective of this study was to investigate the relationship between job satisfaction, occupational stress, burnout and work engagement as dimensions of work-related wellbeing in a sample of members of the police force in South Africa. A survey design was used. Stratifed random samples of members of the police force (N = 677 were taken in the North West Province of South Africa. The Minnesota Job Satisfaction Questionnaire, Police Stress Inventory, Maslach Burnout Inventory – General Survey and Utrecht Work Engagement Scale were used as measuring instruments. The results provided support for a four-factorial model of work-related wellbeing consisting of the following dimensions: job satisfaction (indicating pleasure vs. displeasure, occupational stress (indicating anxiety vs. comfort, burnout (indicating fatigue vs. vigour, and engagement (indicating enthusiasm vs. depression.

  10. Seventh regular meeting of the International Working Group on Reliability of Reactor Pressure Components, Vienna, 3-5 September 1985

    International Nuclear Information System (INIS)

    1986-07-01

    The seventh regular meeting of the IAEA International Working Group on Reliability of Reactor Pressure Components was held at the Agency's Headquarters in Vienna from 3 to 5 September 1985. The representatives of Member States and of the Commission of the European Communities reported the status of the research programmes in this field (12 presentations). A separate abstract was prepared for each of the presentations

  11. The way Wnt works: Components and mechanism

    Science.gov (United States)

    SAITO-DIAZ, KENYI; CHEN, TONY W.; WANG, XIAOXI; THORNE, CURTIS A.; WALLACE, HEATHER A.; PAGE-MCCAW, ANDREA; LEE, ETHAN

    2013-01-01

    The canonical Wnt/β-catenin pathway is an ancient and evolutionarily conserved signaling pathway that is required for the proper development of all metazoans, from the basal demosponge Amphimedon queenslandica to humans. Misregulation of Wnt signaling is implicated in many human diseases, making this pathway an intense area of research in industry as well as academia. In this review, we explore our current understanding of the molecular steps involved in the transduction of a Wnt signal. We will focus on how the critical Wnt pathway component, β-catenin, is in a “futile cycle” of constant synthesis and degradation and how this cycle is disrupted upon pathway activation. We describe the role of the Wnt pathway in major human cancers and in the control of stem cell self-renewal in the developing organism and in adults. Finally, we describe well-accepted criteria that have been proposed as evidence for the involvement of a molecule in regulating the canonical Wnt pathway. PMID:23256519

  12. Effectiveness of a worksite mindfulness-related multi-component health promotion intervention on work engagement and mental health: results of a randomized controlled trial.

    Directory of Open Access Journals (Sweden)

    Jantien van Berkel

    Full Text Available OBJECTIVES: The aim of the present study was to evaluate the effectiveness of a worksite mindfulness-related multi-component health promotion intervention on work engagement, mental health, need for recovery and mindfulness. METHODS: In a randomized controlled trial design, 257 workers of two research institutes participated. The intervention group (n = 129 received a targeted mindfulness-related training, followed by e-coaching. The total duration of the intervention was 6 months. Data on work engagement, mental health, need for recovery and mindfulness were collected using questionnaires at baseline and after 6 and 12 months follow-up. Effects were analyzed using linear mixed effect models. RESULTS: There were no significant differences in work engagement, mental health, need for recovery and mindfulness between the intervention and control group after either 6- or 12-months follow-up. Additional analyses in mindfulness-related training compliance subgroups (high and low compliance versus the control group as a reference and subgroups based on baseline work engagement scores showed no significant differences either. CONCLUSIONS: This study did not show an effect of this worksite mindfulness-related multi-component health promotion intervention on work engagement, mental health, need for recovery and mindfulness after 6 and 12 months. TRIAL REGISTRATION: Netherlands Trial Register NTR2199.

  13. The programme of OECD-Nuclear Energy Agency Committee on the safety of nuclear installations principal working group no. 3 on reactor component integrity

    International Nuclear Information System (INIS)

    Schulz, H.; Miller, A.

    1995-01-01

    The programme of the OECD-NEA Principal Working Group No.3 on reactor component integrity is described including the following issues: regular Committee meetings; non-destructive testing; fracture analysis; aging; related activities

  14. Influence of Components of Net Working Capital on Costs of Companies Manufacturing Machinery and Equipment in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Zdeněk Motlíček

    2015-01-01

    Full Text Available The approach to working capital management significantly affects the performance of companies. Nevertheless, this effect varies depending on the observed industry and company’s size and it may be assumed that it is also dependent on territory differences. The paper presents an empirical research aiming to identify particular links between net working capital and costs of the company. The outcomes indicate a relatively strong positive correlation between the variables, especially in case of inventory. Furthermore he ratio of financial costs to ordinary costs is low, as well as the impact of net working capital components on financial costs. It follows that a focus on collection period would not lead to significant savings. The findings appropriately complement Czech and foreign literature focused more on impact of net working capital or working capital on profitability indicators. Further studies concerning a more detailed analysis of the influence of net working capital on corporate costs are difficult to be found. The present research has been conducted on medium-sized companies located in the Czech Republic and manufacturing machinery and equipment. The obtained results suggest the most suitable area of focus for optimization of working capital in relation to costs for the types of companies defined above.

  15. Vocabulary learning in primary school children: working memory and long-term memory components.

    Science.gov (United States)

    Morra, Sergio; Camba, Roberta

    2009-10-01

    The goal of this study was to investigate which working memory and long-term memory components predict vocabulary learning. We used a nonword learning paradigm in which 8- to 10-year-olds learned picture-nonword pairs. The nonwords varied in length (two vs. four syllables) and phonology (native sounding vs. including one Russian phoneme). Short, phonologically native nonwords were learned best, whereas learning long nonwords leveled off after a few presentation cycles. Linear structural equation analyses showed an influence of three constructs-phonological sensitivity, vocabulary knowledge, and central attentional resources (M capacity)-on nonword learning, but the extent of their contributions depended on specific characteristics of the nonwords to be learned. Phonological sensitivity predicted learning of all nonword types except short native nonwords, vocabulary predicted learning of only short native nonwords, and M capacity predicted learning of short nonwords but not long nonwords. The discussion considers three learning processes-effortful activation of phonological representations, lexical mediation, and passive associative learning-that use different cognitive resources and could be involved in learning different nonword types.

  16. Least-squares variance component estimation

    NARCIS (Netherlands)

    Teunissen, P.J.G.; Amiri-Simkooei, A.R.

    2007-01-01

    Least-squares variance component estimation (LS-VCE) is a simple, flexible and attractive method for the estimation of unknown variance and covariance components. LS-VCE is simple because it is based on the well-known principle of LS; it is flexible because it works with a user-defined weight

  17. Components selection for ageing management

    International Nuclear Information System (INIS)

    Mingiuc, C.; Vidican, D.

    2002-01-01

    Full text: The paper presents a synthesis of methods and activities realized for the selection of critical components to assure plant safety and availability (as electricity supplier). There are presented main criteria for selection, screening process. For the resulted categories of components shall be applied different category of maintenance (condition oriented, scheduled or corrective), function of the importance and financial effort necessary to fulfil the task. 1. Systems and components screening for plant safety assurance For the systems selection, from Safety point of view, was necessary first, to define systems which are dangerous in case of failure (mainly by rupture/ release of radioactivity) and the safety systems which have to mitigate the effects. This is realized based on accident analysis (from Safety Report). Also where taken in to account the 4 basic Safety Principles: 'Reactor shut down; Residual heat removal; Radioactivity products confinement; NPP status monitoring in normal and accident conditions'. Following step is to establish safety support systems, which have to action to assure main safety systems operation. This could be realized based on engineering judgement, or on PSA Level I analysis. Finally shall be realized chains of the support systems, which have to work, till primary systems. For the critical components selection, was realized a Failure Mode and Effect Analysis (FMEA), considering the components effects of failures, on system safety function. 2. Systems and components screening for plant availability assurance The work was realized in two steps: Systems screening; Components screening The systems screening, included: General, analyze of the plant systems list and the definition of those which clearly have to run continue to assure the nominal power; Realization of a complex diagram to define interdependence between the systems (e.g. PHT and auxiliaries, moderator and auxiliaries, plant electrical diagram); Fill of special

  18. Advanced Optoelectronic Components for All-Optical Networks

    National Research Council Canada - National Science Library

    Shapiro, Jeffrey H

    2002-01-01

    Under APOSR Grant F49620-96-1-0126, 'Advanced Optoelectronic Components for All-Optical Networks', we have worked to develop key technologies and components to substantially improve the performance...

  19. Removal of Shippingport Station primary system components and piping

    International Nuclear Information System (INIS)

    LaGuardia, T.S.; Lipsett, S.M.

    1987-01-01

    The dismantling workscope for the Shippingport Station Decommissioning Project was divided into subtasks to permit the work to be subcontracted to the maximum extent practicable. Major subtasks were identified and described by Activity specifications which could then be grouped into logical work packages to be put out for bid. Two of the largest dismantling work packages, removal of piping and components, were grouped together and designated as Activity Specifications 4 and 5. TLG Services, Inc. and Cleveland Wrecking Company formed a Joint Venture to perform this work during a two-year period at a cost of approximately $7 million. The major portions of this dismantling workscope are described. The primary system components within this workscope consist of the stainless steel reactor coolant piping, check valves, reactor coolant pumps, steam generators, and reactor purification demineralizers and coolers. The work performed, the heavy rigging preparations and procedures, the cutting tools used, component draining/capping techniques to prevent spills, contamination containment, airborne control techniques, and lessons learned during the removal of these primary system components are described. Summaries of crew size and composition, labor hours, duration hours and radiation exposure to workers are provided and discussed briefly. The successful completion of this work is evidence of the engineering, planning, equipment, materials and labor pool available to remove large, radioactively contaminated components safely. This experience will help decommissioning planners to prepare for the removal of reactor components in future decommissioning

  20. Study of the WWR-S IFIN-HH reactor main components stare, after 40 years working, using nondestructive methods

    International Nuclear Information System (INIS)

    Dragolici, A. C.; Zorliu, A.; Ripeanu, R.; Petran, C.; Mincu, I.

    2000-01-01

    The main goal of these investigations was to establish the security level after 40 years of working of the WWR-S research reactor of Horia Hulubei National Institute of Research and Development for Physics and Nuclear Engineering, Bucharest-Magurele. The purpose of these investigations was: checking the functionality and the physical integrity of the main components of the reactor. The physical integrity of the components is usually affected by slow processes, such as: corrosion, erosion, aging, deformations and initially hidden flaws with very slow evolutions. The methods used to determine the effects of these processes and to infer conclusions about the physical integrity of the facility are: visualizations by optical means (endoscopy and video camera), examination using ultrasounds and gammagraphy. The objective of the endoscopic checking was the view of the state of interior surfaces of the tubes and pipes, specially the inaccessible areas of the non-dismantling parts of the reactor. Big size components, such as reactor vessel, the biologic protection vessel and the main large diameter pipes of the primary cooling system, were investigated using a special device that contains a video camera connected to a PC. To obtain more information regarding the evolution of the corrosion spots, scratches and harmed areas on the investigated surfaces, their depth was checked by ultrasounds, and the welding seams structure was determined by gammagraphy. A table is given with some significant results obtained from ultrasound measurements in different points of reactor vessel, thermal column, horizontal tubes, etc. After these tests, the conclusions are: the maximum corrosion depth is 0.2 mm; - scratches are superficially, not exceeding 0.2-0.5 mm; - the traces of harmed areas are produced by the electromagnetic device utilization used for manipulation of aluminium capsules which contain irradiated substances. They are superficial, with maximum area of about 1 cm 2 ; the

  1. Evaluating the developmental trajectory of the episodic buffer component of working memory and its relation to word recognition in children.

    Science.gov (United States)

    Wang, Shinmin; Allen, Richard J; Lee, Jun Ren; Hsieh, Chia-En

    2015-05-01

    The creation of temporary bound representation of information from different sources is one of the key abilities attributed to the episodic buffer component of working memory. Whereas the role of working memory in word learning has received substantial attention, very little is known about the link between the development of word recognition skills and the ability to bind information in the episodic buffer of working memory and how it may develop with age. This study examined the performance of Grade 2 children (8 years old), Grade 3 children (9 years old), and young adults on a task designed to measure their ability to bind visual and auditory-verbal information in working memory. Children's performance on this task significantly correlated with their word recognition skills even when chronological age, memory for individual elements, and other possible reading-related factors were taken into account. In addition, clear developmental trajectories were observed, with improvements in the ability to hold temporary bound information in working memory between Grades 2 and 3, and between the child and adult groups, that were independent from memory for the individual elements. These findings suggest that the capacity to temporarily bind novel auditory-verbal information to visual form in working memory is linked to the development of word recognition in children and improves with age. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. The development of component-based information systems

    CERN Document Server

    Cesare, Sergio de; Macredie, Robert

    2015-01-01

    This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

  3. Proposal for the Award of Two Contracts for the Technical Services for Work on Components of CERN Particle Accelerators and High Energy Physics Experiments

    CERN Document Server

    2003-01-01

    This document concerns the award of two contracts for the technical services for work on components of CERN particle accelerators and high energy physics experiments. Following a market survey carried out among 73 firms in fourteen Member States, a call for tenders (IT-3156/SPL) was sent on 4 November 2002 to three consortia in four Member States. By the closing date, CERN had received tenders from the three consortia. The Finance Committee is invited to agree to the negotiation of two contracts with: 1) the consortium SERCO FACILITIES MANAGEMENT (NL) - GERARD PERRIER INDUSTRIE (FR) - INEO ALPES (FR), the lowest bidder, for approximately 55% of the technical services for work on components of CERN particle accelerators and high energy physics experiments, for an initial period of five years and for a total amount not exceeding 37 435 270 euros (54 902 500 Swiss francs), subject to revision for inflation from 1 January 2005. The contract will include options for two one-year extensions beyond the initial five-...

  4. The Culture-Work-Health Model and Work Stress.

    Science.gov (United States)

    Peterson, Michael; Wilson, John F.

    2002-01-01

    Examines the role of organizational culture in the etiology of workplace stress through the framework of the Culture-Work- Health model. A review of relevant business and health literature indicates that culture is an important component of work stress and may be a key to creating effective organizational stress interventions. (SM)

  5. EMPLOYEE RETENTION: COMPONENTS OF JOB SATISFACTION OF GREEN INDUSTRY EMPLOYEES

    OpenAIRE

    Bitsch, Vera; Hogberg, Michael

    2004-01-01

    Fourteen businesses participated in case studies of labor management practices. Fifteen non-supervisory employee interviews were analyzed regarding components of job satisfaction. Components were family values, achievement, recognition, work itself, involvement, personal life, interpersonal relationships, job security, supervision, working conditions, organization, safety, compensation and information.

  6. Dynamic k-out-of-n system reliability with component partnership

    International Nuclear Information System (INIS)

    Coit, David W.; Chatwattanasiri, Nida; Wattanapongsakorn, Naruemon; Konak, Abdullah

    2015-01-01

    This paper describes a new k-out-of-n system reliability model that is appropriate for certain design problems when the minimum number of required components, k, changes dynamically in response to failures to maximize the utility of the available collection of functioning components. This new model shares some distinct similarities with weighted k-out-of-n models and for some problems they produce the same result. However, there are subtle and distinct differences, and in practice, there are some complex applications have not been properly explained or modeled by traditional or extended k-out-of-n system models. For this application, components are arranged in a k-out-of-n configuration of heterogeneous components with different performance levels. Component performance is indicated by a component-specific component partnership level; the fewer partners required to operate successfully implies higher performance. The components can work collectively with partners at the same level to maintain system reliability, or they can create a partnership group with components at higher performance levels which serve as replacements to provide the necessary number of working components. When components fail, the dynamic k-out-of-n configuration maintains reliability of the system with changing k by having components create partnerships with other components at the same level or above. To demonstrate the model, a system replacement maintenance policy based on a replacement interval variable is applied to an example system to obtain the optimal replacement time. - Highlights: • A new k-out-of-n system reliability model is presented. • Components can form partnerships with other components. • The new k-out-of-n model is presented with a dynamic or changing k. • The new model is for systems with components that must work together in a group

  7. Reasoning=working Memoryattention

    Science.gov (United States)

    Buehner, M.; Krumm, S.; Pick, M.

    2005-01-01

    The purpose of this study was to clarify the relationship between attention, components of working memory, and reasoning. Therefore, twenty working memory tests, two attention tests, and nine intelligence subtests were administered to 135 students. Using structural equation modeling, we were able to replicate a functional model of working memory…

  8. NHI Component Technical Readiness Evaluation System

    International Nuclear Information System (INIS)

    Sherman, S.; Wilson, Dane F.; Pawel, Steven J.

    2007-01-01

    A decision process for evaluating the technical readiness or maturity of components (i.e., heat exchangers, chemical reactors, valves, etc.) for use by the U.S. DOE Nuclear Hydrogen Initiative is described. This system is used by the DOE NHI to assess individual components in relation to their readiness for pilot-scale and larger-scale deployment and to drive the research and development work needed to attain technical maturity. A description of the evaluation system is provided, and examples are given to illustrate how it is used to assist in component R and D decisions.

  9. 3D additive manufactured 316L components microstructural features and changes induced by working life cycles

    Science.gov (United States)

    Pace, M. L.; Guarnaccio, A.; Dolce, P.; Mollica, D.; Parisi, G. P.; Lettino, A.; Medici, L.; Summa, V.; Ciancio, R.; Santagata, A.

    2017-10-01

    The ability of processing through laser beams different kinds of metallic powders for direct production of 3D components with complex geometries has been gaining an impressive and growing attention for specific industrial applications. The process which can be distinguished as Selective Laser Sintering or Selective Laser Melting is even considered, more generally, as Additive Manufacturing where layer by layer material is built by the interaction between a laser beam and a powder bed. The rapid heating of the powder due to the laser beam energy transfer process followed by a rapid cooling rate induces within the manufactured material a cellular structure with fine sub-grains, which are in the range of few hundreds of micrometers. These metastable structures, which are smaller than the grain size in conventionally manufactured 316L stainless steel components, can undertake towards a recrystallization process due to either heat or mechanical treatments. For instance, when sub-grain boundaries of the cells are enriched with Mo and higher concentration of dislocation, dynamical processes occur generating local residual stresses. In these circumstances the segregation of Mo in cell boundaries is out of thermodynamic equilibrium conditions so that microstructures and phases are metastable. In the range of 1100-1400 °C heat treatments a complete dissolution of Mo in the Fe matrix with a gradual disappearance of sub-microns cell is observed feeding the growth of larger austenitic sub-grains formation. It follows a higher degree of Mo dissolution in the material matrix and a decrease of dislocation's concentration (Saeidi et al., 2015) [1]. In the work here presented we point out which are the microstructural features of stainless steel 316L components realized by Additive Manufacturing. Furthermore, the occurrence of a microstructural evolution is presented after experiencing to fatigue of 80000 cycles some door joints obtained by this technique. A decrease of dislocation

  10. Simulation work of fatigue life prediction of rubber automotive components

    International Nuclear Information System (INIS)

    Samad, M S A; Ali, Aidy

    2010-01-01

    The usage of rubbers has always been so important, especially in automotive industries. Rubbers have a hyper elastic behaviour which is the ability to withstand very large strain without failure. The normal applications for rubbers are used for shock absorption, sound isolation and mounting. In this study, the predictions of fatigue life of an engine mount of rubber automotive components were presented. The finite element analysis was performed to predict the critical part and the strain output were incorporated into fatigue model for prediction. The predicted result shows agreement in term of failure location of rubber mount.

  11. Working time flexibility components and working time regimes in Europe: using company-level data across 21 countries

    OpenAIRE

    Chung, Heejung; Tijdens, Kea

    2013-01-01

    Working time flexibility comprises a wide variety of arrangements, from part-time,\\ud overtime, to long-term leaves. Theoretical approaches to grouping these arrangements\\ud have been developed, but empirical underpinnings are rare. This article investigates\\ud the bundles that can be found for various flexible working time arrangements, using the\\ud Establishment Survey on Working Time and Work–Life Balance, 2004/2005, covering 21\\ud EU member states and 13 industries. The results from the fac...

  12. Standardization of Work Measurement. Volume 7, Bench Work Occupations

    National Research Council Canada - National Science Library

    1975-01-01

    ..., sew, assemble, inspect, repair, test, and similarly work relatively small objects and materials, such as metal products, electronic components, electrical appliances, instruments, footwear, and garments...

  13. Optimization of Cycle and Expander Design of an Organic Rankine Cycle Unit using Multi-Component Working Fluids

    DEFF Research Database (Denmark)

    Meroni, Andrea; Andreasen, Jesper Graa; Pierobon, Leonardo

    2016-01-01

    Organic Rankine cycle (ORC) power systems represent at-tractive solutions for power conversion from low temperatureheat sources, and the use of these power systems is gaining increasing attention in the marine industry. This paper proposesthe combined optimal design of cycle and expander...... for an organic Rankine cycle unit utilizing waste heat from low temperature heat sources. The study addresses a case where the minimum temperature of the heat source is constrained and a case where no constraint is imposed. The former case is the wasteheat recovery from jacket cooling water of a marine diesel...... engine onboard a large ship, and the latter is representative of a low-temperature geothermal, solar or waste heat recovery application. Multi-component working fluids are investigated, as they allow improving the match between the temperature pro-files in the heat exchangers and, consequently, reducing...

  14. Evidence for Two Attentional Components in Visual Working Memory

    Science.gov (United States)

    Allen, Richard J.; Baddeley, Alan D.; Hitch, Graham J.

    2014-01-01

    How does executive attentional control contribute to memory for sequences of visual objects, and what does this reveal about storage and processing in working memory? Three experiments examined the impact of a concurrent executive load (backward counting) on memory for sequences of individually presented visual objects. Experiments 1 and 2 found…

  15. Improving model biases in an ESM with an isopycnic ocean component by accounting for wind work on oceanic near-inertial motions.

    Science.gov (United States)

    de Wet, P. D.; Bentsen, M.; Bethke, I.

    2016-02-01

    It is well-known that, when comparing climatological parameters such as ocean temperature and salinity to the output of an Earth System Model (ESM), the model exhibits biases. In ESMs with an isopycnic ocean component, such as NorESM, insufficient vertical mixing is thought to be one of the causes of such differences between observational and model data. However, enhancing the vertical mixing of the model's ocean component not only requires increasing the energy input, but also sound physical reasoning for doing so. Various authors have shown that the action of atmospheric winds on the ocean's surface is a major source of energy input into the upper ocean. However, due to model and computational constraints, oceanic processes linked to surface winds are incompletely accounted for. Consequently, despite significantly contributing to the energy required to maintain ocean stratification, most ESMs do not directly make provision for this energy. In this study we investigate the implementation of a routine in which the energy from work done on oceanic near-inertial motions is calculated in an offline slab model. The slab model, which has been well-documented in the literature, runs parallel to but independently from the ESM's ocean component. It receives wind fields with a frequency higher than that of the coupling frequency, allowing it to capture the fluctuations in the winds on shorter time scales. The additional energy calculated thus is then passed to the ocean component, avoiding the need for increased coupling between the components of the ESM. Results show localised reduction in, amongst others, the salinity and temperature biases of NorESM, confirming model sensitivity to wind-forcing and points to the need for better representation of surface processes in ESMs.

  16. Return-to-Work Within a Complex and Dynamic Organizational Work Disability System.

    Science.gov (United States)

    Jetha, Arif; Pransky, Glenn; Fish, Jon; Hettinger, Lawrence J

    2016-09-01

    Background Return-to-work (RTW) within a complex organizational system can be associated with suboptimal outcomes. Purpose To apply a sociotechnical systems perspective to investigate complexity in RTW; to utilize system dynamics modeling (SDM) to examine how feedback relationships between individual, psychosocial, and organizational factors make up the work disability system and influence RTW. Methods SDMs were developed within two companies. Thirty stakeholders including senior managers, and frontline supervisors and workers participated in model building sessions. Participants were asked questions that elicited information about the structure of the work disability system and were translated into feedback loops. To parameterize the model, participants were asked to estimate the shape and magnitude of the relationship between key model components. Data from published literature were also accessed to supplement participant estimates. Data were entered into a model created in the software program Vensim. Simulations were conducted to examine how financial incentives and light duty work disability-related policies, utilized by the participating companies, influenced RTW likelihood and preparedness. Results The SDMs were multidimensional, including individual attitudinal characteristics, health factors, and organizational components. Among the causal pathways uncovered, psychosocial components including workplace social support, supervisor and co-worker pressure, and supervisor-frontline worker communication impacted RTW likelihood and preparedness. Interestingly, SDM simulations showed that work disability-related policies in both companies resulted in a diminishing or opposing impact on RTW preparedness and likelihood. Conclusion SDM provides a novel systems view of RTW. Policy and psychosocial component relationships within the system have important implications for RTW, and may contribute to unanticipated outcomes.

  17. Analysis of failed nuclear plant components

    International Nuclear Information System (INIS)

    Diercks, D.R.

    1993-01-01

    Argonne National Laboratory has conducted analyses of failed components from nuclear power-generating stations since 1974. The considerations involved in working with an analyzing radioactive components are reviewed here, and the decontamination of these components is discussed. Analyses of four failed components from nuclear plants are then described to illustrate the kinds of failures seen in service. The failures discussed are (1) intergranular stress-corrosion cracking of core spray injection piping in a boiling water reactor, (2) failure of canopy seal welds in adapter tube assemblies in the control rod drive head of a pressurized water reactor, (3) thermal fatigue of a recirculation pump shaft in a boiling water reactor, and (4) failure of pump seal wear rings by nickel leaching in a boiling water reactor

  18. Analysis of failed nuclear plant components

    International Nuclear Information System (INIS)

    Diercks, D.R.

    1992-07-01

    Argonne National Laboratory has conducted analyses of failed components from nuclear power generating stations since 1974. The considerations involved in working with and analyzing radioactive components are reviewed here, and the decontamination of these components is discussed. Analyses of four failed components from nuclear plants are then described to illustrate the kinds of failures seen in service. The failures discussed are (a) intergranular stress corrosion cracking of core spray injection piping in a boiling water reactor, (b) failure of canopy seal welds in adapter tube assemblies in the control rod drive head of a pressure water reactor, (c) thermal fatigue of a recirculation pump shaft in a boiling water reactor, and (d) failure of pump seal wear rings by nickel leaching in a boiling water reactor

  19. Two component systems: physiological effect of a third component.

    Directory of Open Access Journals (Sweden)

    Baldiri Salvado

    Full Text Available Signal transduction systems mediate the response and adaptation of organisms to environmental changes. In prokaryotes, this signal transduction is often done through Two Component Systems (TCS. These TCS are phosphotransfer protein cascades, and in their prototypical form they are composed by a kinase that senses the environmental signals (SK and by a response regulator (RR that regulates the cellular response. This basic motif can be modified by the addition of a third protein that interacts either with the SK or the RR in a way that could change the dynamic response of the TCS module. In this work we aim at understanding the effect of such an additional protein (which we call "third component" on the functional properties of a prototypical TCS. To do so we build mathematical models of TCS with alternative designs for their interaction with that third component. These mathematical models are analyzed in order to identify the differences in dynamic behavior inherent to each design, with respect to functionally relevant properties such as sensitivity to changes in either the parameter values or the molecular concentrations, temporal responsiveness, possibility of multiple steady states, or stochastic fluctuations in the system. The differences are then correlated to the physiological requirements that impinge on the functioning of the TCS. This analysis sheds light on both, the dynamic behavior of synthetically designed TCS, and the conditions under which natural selection might favor each of the designs. We find that a third component that modulates SK activity increases the parameter space where a bistable response of the TCS module to signals is possible, if SK is monofunctional, but decreases it when the SK is bifunctional. The presence of a third component that modulates RR activity decreases the parameter space where a bistable response of the TCS module to signals is possible.

  20. Working Memory and Developmental Language Impairments

    Science.gov (United States)

    Henry, Lucy A.; Botting, Nicola

    2017-01-01

    Children with developmental language impairments (DLI) are often reported to show difficulties with working memory. This review describes the four components of the well-established working memory model, and considers whether there is convincing evidence for difficulties within each component in children with DLI. The emphasis is on the most…

  1. Spain's nuclear components industry

    International Nuclear Information System (INIS)

    Kaibel, E.

    1985-01-01

    Spanish industrial participation in supply of components for nuclear power plants has grown steadily over the last fifteen years. The share of Spanish companies in work for the five second generation nuclear power plants increased to 50% of total capital investments. The necessity to maintain Spanish technology and production in the nuclear field is emphasized

  2. Crack growth determination on laboratory components

    International Nuclear Information System (INIS)

    Hurst, R.C.

    1993-01-01

    In order to aid design and support remanent life assessment of plant components operating at elevated temperatures, the reliability of the analytical methods, which translate materials data procured from the laboratory to the behaviour of actual components, requires validation. Such a validation can of course be interpreted from operating plant, however the potential risks involved encourage the development of out of plant techniques for the validation of representative components. For meaningful validation, these techniques need careful control and high accuracy which can best be achieved in a laboratory environment. As the laboratory component test should be designed to simulate actual plant conditions as closely as possible, the direct extension of the results to the plant component case requires scaling up. Consequently the successful development of such a test may even lead to the advantageous situation where it could form an alternative to the conventional route where, for example, it may not be possible to obtain the plant component's metallurgical structure in a conventional specimen or, alternatively, when too many assumptions are required in the analysis when translating to different geometries and stress systems. Under these conditions, in spite of the more sophisticated test requirements, it may prove more reasonable to opt for the more representative laboratory component data for use in design or lifetime prediction. The present work describes the application of the component validation test philosophy to the problem of crack growth under two rather different loading conditions. In both cases, crack growth is measured using the direct current potential drop (PD) technique on tubular metallic components containing artificial defects, however the plant conditions to be simulated lead to either creep or thermal fatigue. The creep studies on Alloy 800H support heat exchanger design for nuclear plant, solar towers and chemical plant, whereas the work on the

  3. Perceived Calling and Work Engagement Among Nurses.

    Science.gov (United States)

    Ziedelis, Arunas

    2018-03-01

    The purpose of this study was to explore the relationship of perceived calling and work engagement in nursing over and above major work environment factors. In all, 351 nurses from various health care institutions completed the survey. Data were collected about the most demanding aspects of nursing, major job resources, the degree to which nursing is perceived as a meaningful calling, work engagement, and main demographic information. Hierarchical linear regression was applied to assess the relation between perceived calling and work engagement, while controlling for demographic and work environment factors, and perceived calling was significantly related to two out of three components of nurses' work engagement. The highest association was found with dedication component, and vigor component was related insignificantly. Results have shown that perceived calling might motivate nurses to engage in their work even in burdensome environment, although possible implications for the occupational well-being of nurses themselves remains unclear.

  4. Analysis of failed nuclear plant components

    Science.gov (United States)

    Diercks, D. R.

    1993-12-01

    Argonne National Laboratory has conducted analyses of failed components from nuclear power- gener-ating stations since 1974. The considerations involved in working with and analyzing radioactive compo-nents are reviewed here, and the decontamination of these components is discussed. Analyses of four failed components from nuclear plants are then described to illustrate the kinds of failures seen in serv-ice. The failures discussed are (1) intergranular stress- corrosion cracking of core spray injection piping in a boiling water reactor, (2) failure of canopy seal welds in adapter tube assemblies in the control rod drive head of a pressurized water reactor, (3) thermal fatigue of a recirculation pump shaft in a boiling water reactor, and (4) failure of pump seal wear rings by nickel leaching in a boiling water reactor.

  5. Is working memory still working?

    Science.gov (United States)

    Baddeley, A D

    2001-11-01

    The current state of A. D. Baddeley and G. J. Hitch's (1974) multicomponent working memory model is reviewed. The phonological and visuospatial subsystems have been extensively investigated, leading both to challenges over interpretation of individual phenomena and to more detailed attempts to model the processes underlying the subsystems. Analysis of the controlling central executive has proved more challenging, leading to a proposed clarification in which the executive is assumed to be a limited capacity attentional system, aided by a newly postulated fourth system, the episodic buffer. Current interest focuses most strongly on the link between working memory and long-term memory and on the processes allowing the integration of information from the component subsystems. The model has proved valuable in accounting for data from a wide range of participant groups under a rich array of task conditions. Working memory does still appear to be working.

  6. Principal Component Analysis: Most Favourite Tool in Chemometrics

    Indian Academy of Sciences (India)

    Abstract. Principal component analysis (PCA) is the most commonlyused chemometric technique. It is an unsupervised patternrecognition technique. PCA has found applications in chemistry,biology, medicine and economics. The present work attemptsto understand how PCA work and how can we interpretits results.

  7. Foundations of mathematics and literacy: The role of executive functioning components.

    Science.gov (United States)

    Purpura, David J; Schmitt, Sara A; Ganley, Colleen M

    2017-01-01

    The current study investigated the relations between the three cognitive processes that comprise executive functioning (EF)-response inhibition, working memory, and cognitive flexibility-and individual components of mathematics and literacy skills in preschool children. Participants were 125 preschool children ranging in age from 3.12 to 5.26years (M=4.17years, SD=0.58). Approximately 53.2% were female, and the sample was predominantly Caucasian (69.8%). Results suggest that the components of EF may be differentially related to the specific components of early mathematics and literacy. For mathematics, response inhibition was broadly related to most components. Working memory was related to more advanced mathematics skills that involve comparison or combination of numbers and quantities. Cognitive flexibility was related to more conceptual or abstract mathematics skills. For early literacy, response inhibition and cognitive flexibility were related to print knowledge, and working memory was related only to phonological awareness. None of the EF components was related to vocabulary. These findings provide initial evidence for better understanding the ways in which EF components and academic skills are related and measured. Furthermore, the findings provide a foundation for further study of the components of each domain using a broader and more diverse array of measures. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Pricing end-of-life components

    Science.gov (United States)

    Vadde, Srikanth; Kamarthi, Sagar V.; Gupta, Surendra M.

    2005-11-01

    The main objective of a product recovery facility (PRF) is to disassemble end-of-life (EOL) products and sell the reclaimed components for reuse and recovered materials in second-hand markets. Variability in the inflow of EOL products and fluctuation in demand for reusable components contribute to the volatility in inventory levels. To stay profitable the PRFs ought to manage their inventory by regulating the price appropriately to minimize holding costs. This work presents two deterministic pricing models for a PRF bounded by environmental regulations. In the first model, the demand is price dependent and in the second, the demand is both price and time dependent. The models are valid for single component with no inventory replenishment sale during the selling horizon . Numerical examples are presented to illustrate the models.

  9. Structural analysis of nuclear components

    International Nuclear Information System (INIS)

    Ikonen, K.; Hyppoenen, P.; Mikkola, T.; Noro, H.; Raiko, H.; Salminen, P.; Talja, H.

    1983-05-01

    THe report describes the activities accomplished in the project 'Structural Analysis Project of Nuclear Power Plant Components' during the years 1974-1982 in the Nuclear Engineering Laboratory at the Technical Research Centre of Finland. The objective of the project has been to develop Finnish expertise in structural mechanics related to nuclear engineering. The report describes the starting point of the research work, the organization of the project and the research activities on various subareas. Further the work done with computer codes is described and also the problems which the developed expertise has been applied to. Finally, the diploma works, publications and work reports, which are mainly in Finnish, are listed to give a view of the content of the project. (author)

  10. Switching Attention within Working Memory is Reflected in the P3a Component of the Human Event-Related Brain Potential.

    Directory of Open Access Journals (Sweden)

    Stefan eBerti

    2016-01-01

    Full Text Available The flexible access to information in working memory is crucial for adaptive behavior. It is assumed that this is realized by switching the focus of attention within working memory. Switching of attention is mirrored in the P3a component of the human event-related brain potential (ERP and it has been argued that the processes reflected by the P3a are also relevant for selecting information within working memory. The aim of the present study was to further evaluate whether the P3a mirrors genuine switching of attention within working memory by applying an object switching task: Participants updated a memory list of four digits either by replacing one item with another digit or by processing the stored digit. ERPs were computed separately for two types of trials: (1 trials in which an object was repeated and (2 trials in which a switch to a new object was required in order to perform the task. Object switch trials showed increased response times compared with repetition trials in both task conditions. In addition, switching costs were increased in the processing compared with the replacement condition. Pronounced P3a’s were obtained in switching trials but there were no difference between the two updating tasks (replacement or processing. These results were qualified by the finding that the magnitude of the visual location shift also affects the ERPs in the P3a time window. Taken together, the present pattern of results suggest that the P3a reflects an initial process of selecting information in working memory but not the memory updating itself.

  11. Some Studies on Reduction of Ovality in Turned Component-Case study

    Directory of Open Access Journals (Sweden)

    Nilesh Dhirajlal Ghetiya

    2014-08-01

    Full Text Available In the competitive market and globalization phase, industries are required to manufacture good quality machine tools with optimized performance at the moderate cost. Moreover, the industries are facing competition internationally due to worldwide globalization of business. This work aims to reduce the error called ovality in the turned work piece. This work piece is a clutch component used for the clutch assembly. For the clutch to work perfectly, it is required for its component to be precise and error free. The machining parameters like cutting speed, feed rate and depth of cut are taken as input parameters and the ovality as output response. Response surface methodology is used for the optimization of process parameters. The most significant process parameter causing the ovality has been found. The other attempts like balancing of the work piece and radiography of the work piece is done to solve the problem which is causing the ovality. The centrifugal force analysis of the component is carried out using finite element analysis.

  12. Unavailability of repairable components with failures detectable upon demand: Remarks on a work of Caldarola

    International Nuclear Information System (INIS)

    Souza Borges, W. de; Silva Pagetti, P. da

    1987-01-01

    In this paper an exact expression has been obtained for the asymptotic mean unavailability in time domain of components with failures detected upon demand. The model is more general than those proposed in the literature since it allows the use of general distributions for component life times, repair times and inter-demand times. Expressions for the special case of exponential life times have also been derived. (orig.)

  13. Empirical projection-based basis-component decomposition method

    Science.gov (United States)

    Brendel, Bernhard; Roessl, Ewald; Schlomka, Jens-Peter; Proksa, Roland

    2009-02-01

    Advances in the development of semiconductor based, photon-counting x-ray detectors stimulate research in the domain of energy-resolving pre-clinical and clinical computed tomography (CT). For counting detectors acquiring x-ray attenuation in at least three different energy windows, an extended basis component decomposition can be performed in which in addition to the conventional approach of Alvarez and Macovski a third basis component is introduced, e.g., a gadolinium based CT contrast material. After the decomposition of the measured projection data into the basis component projections, conventional filtered-backprojection reconstruction is performed to obtain the basis-component images. In recent work, this basis component decomposition was obtained by maximizing the likelihood-function of the measurements. This procedure is time consuming and often unstable for excessively noisy data or low intrinsic energy resolution of the detector. Therefore, alternative procedures are of interest. Here, we introduce a generalization of the idea of empirical dual-energy processing published by Stenner et al. to multi-energy, photon-counting CT raw data. Instead of working in the image-domain, we use prior spectral knowledge about the acquisition system (tube spectra, bin sensitivities) to parameterize the line-integrals of the basis component decomposition directly in the projection domain. We compare this empirical approach with the maximum-likelihood (ML) approach considering image noise and image bias (artifacts) and see that only moderate noise increase is to be expected for small bias in the empirical approach. Given the drastic reduction of pre-processing time, the empirical approach is considered a viable alternative to the ML approach.

  14. On the relationship between executive functions of working memory and components derived from fluid intelligence measures.

    Science.gov (United States)

    Ren, Xuezhu; Schweizer, Karl; Wang, Tengfei; Chu, Pei; Gong, Qin

    2017-10-01

    The aim of the current study is to provide new insights into the relationship between executive functions and intelligence measures in considering the item-position effect observed in intelligence items. Raven's Advanced Progressive Matrices (APM) and Horn's LPS reasoning test were used to assess fluid intelligence which served as criterion in investigating the relationship between intelligence and executive functions. A battery of six experimental tasks measured the updating, shifting, and inhibition processes of executive functions. Data were collected from 205 university students. Fluid intelligence showed substantial correlations with the updating and inhibition processes and no correlation with the shifting process without considering the item-position effect. Next, the fixed-link model was applied to APM and LPS data separately to decompose them into an ability component and an item-position component. The results of relating the components to executive functions showed that the updating and shifting processes mainly contributed to the item-position component whereas the inhibition process was mainly associated with the ability component of each fluid intelligence test. These findings suggest that improvements in the efficiency of updating and shifting processes are likely to occur during the course of completing intelligence measures and inhibition is important for intelligence in general. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Comparison of common components analysis with principal components analysis and independent components analysis: Application to SPME-GC-MS volatolomic signatures.

    Science.gov (United States)

    Bouhlel, Jihéne; Jouan-Rimbaud Bouveresse, Delphine; Abouelkaram, Said; Baéza, Elisabeth; Jondreville, Catherine; Travel, Angélique; Ratel, Jérémy; Engel, Erwan; Rutledge, Douglas N

    2018-02-01

    The aim of this work is to compare a novel exploratory chemometrics method, Common Components Analysis (CCA), with Principal Components Analysis (PCA) and Independent Components Analysis (ICA). CCA consists in adapting the multi-block statistical method known as Common Components and Specific Weights Analysis (CCSWA or ComDim) by applying it to a single data matrix, with one variable per block. As an application, the three methods were applied to SPME-GC-MS volatolomic signatures of livers in an attempt to reveal volatile organic compounds (VOCs) markers of chicken exposure to different types of micropollutants. An application of CCA to the initial SPME-GC-MS data revealed a drift in the sample Scores along CC2, as a function of injection order, probably resulting from time-related evolution in the instrument. This drift was eliminated by orthogonalization of the data set with respect to CC2, and the resulting data are used as the orthogonalized data input into each of the three methods. Since the first step in CCA is to norm-scale all the variables, preliminary data scaling has no effect on the results, so that CCA was applied only to orthogonalized SPME-GC-MS data, while, PCA and ICA were applied to the "orthogonalized", "orthogonalized and Pareto-scaled", and "orthogonalized and autoscaled" data. The comparison showed that PCA results were highly dependent on the scaling of variables, contrary to ICA where the data scaling did not have a strong influence. Nevertheless, for both PCA and ICA the clearest separations of exposed groups were obtained after autoscaling of variables. The main part of this work was to compare the CCA results using the orthogonalized data with those obtained with PCA and ICA applied to orthogonalized and autoscaled variables. The clearest separations of exposed chicken groups were obtained by CCA. CCA Loadings also clearly identified the variables contributing most to the Common Components giving separations. The PCA Loadings did not

  16. If it works there, will it work here? The effect of a multi-component responsible beverage service (RBS) programme on violence in Oslo.

    Science.gov (United States)

    Skardhamar, Torbjørn; Fekjær, Silje Bringsrud; Pedersen, Willy

    2016-12-01

    The Stockholm Prevents Alcohol and Drug Problems (STAD) programme has been regarded as one of the most successful programmes to date, in reducing alcohol-related violence. This multi-component Responsible Beverage Service (RBS) programme was implemented in Stockholm, Sweden, and has been documented to be extremely effective in reducing alcohol-related nightlife violence. The SALUTT programme in Oslo, Norway was carefully modelled on the STAD project. We investigate whether the results from STAD were replicated in the SALUTT intervention. Using geocoded data, the level of violence in the intervention area was compared with different control areas before and after the intervention. Autoregressive moving average models (ARIMA). The SALUTT programme had no statistically significant effect on violence. However, the level of violence in the different potential control areas of Oslo fluctuated without a clear common trend. Hence, it was difficult to establish proper control areas. The results from the Swedish STAD-intervention were not replicated in Oslo. Successful interventions are not necessarily replicated in other contexts, and the current literature does not shed sufficient light on the conditions under which such interventions actually work. Moreover, more attention should be devoted to the identification of adequate control areas in future research. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  17. Component development for X-band above 100 MW

    International Nuclear Information System (INIS)

    Fowkes, W.R.; Callin, R.S.; Studzinski, M.

    1991-05-01

    The requirement for some of the components described in this paper began with the Relativistic Klystron program done in collaboration with LLNL and LBL. This effort culminated in a klystron operating at 11.4 GHz delivering 330 MW into a pair of high-gradient accelerating structures. The electron beam for this klystron was formed in a 1 MeV induction linac at a very low duty cycle. The subsequent RF source development work at SLAC for the Next Linear Collider utilized some of these components, and required further and new development of others, work reliably at higher average power. 6 refs., 6 figs., 1 tab

  18. Working Memory and Language: An Overview.

    Science.gov (United States)

    Baddeley, Alan

    2003-01-01

    This article introduces the concept of a multi-component working memory. Emphasis is placed on the phonological loop component, its fractionation into a storage and processing component, and implications for native and second language learning. An overview of the visual spatial sketchpad and its possible role in language is provided. (Contains…

  19. Recall initiation strategies must be controlled in training studies that use immediate free recall tasks to measure the components of working memory capacity across time.

    Science.gov (United States)

    Gibson, Bradley S; Gondoli, Dawn M; Johnson, Ann C; Robison, Matthew K

    2014-01-01

    There has been great interest in using working memory (WM) training regimens as an alternative treatment for ADHD, but it has recently been concluded that existing training regimens may not be optimally designed because they target the primary memory component but not the secondary component of WM capacity. This conclusion requires the ability to accurately measure changes in primary and secondary memory abilities over time. The immediate free recall task has been used in previous studies to measure these changes; however, one concern with these tasks is that the recall order required on training exercises may influence the recall strategy used during free recall, which may in turn influence the relative number of items recalled from primary and secondary memory. To address this issue, previous training studies have explicitly controlled recall strategy before and after training. However, the necessity of controlling for recall strategies has not been explicitly tested. The present study investigated the effects of forward-serial-order training on free recall performance under conditions in which recall strategy was not controlled using a sample of adolescents with ADHD. Unlike when recall order was controlled, the main findings showed selective improvement of the secondary memory component (as opposed to the primary memory component) when recall order was uncontrolled. This finding advances our understanding of WM training by highlighting the importance of controlling for recall strategies when free recall tasks are used to measure changes in the primary and secondary components of WM across time.

  20. Monitoring distributed object and component communication

    NARCIS (Netherlands)

    Diakov, N.K.

    2004-01-01

    This thesis presents our work in the area of monitoring distributed software applications (DSAs). We produce three main results: (1) a design approach for building monitoring systems, (2) a design of a system for MOnitoring Distributed Object and Component Communication (MODOCC) behavior in

  1. How doctors apply semantic components to specify search in work-related information retrieval

    DEFF Research Database (Denmark)

    Lykke, Marianne; Price, Susan L.; Delcambre, Lois L. M.

    2012-01-01

    Workplace searching is often context-specific and targets a “right answer” within some domain-specific aspect of the search topic. We have developed the semantic component (SC) model that allows searchers to specify a search within context-specific aspects of the main topic of documents. The goal...

  2. Optimization of the compressive strength of five-component-concrete ...

    African Journals Online (AJOL)

    The paper presents the report of an investigation carried out to optimize some mechanical properties of a five-component-concrete mix. Mound soil (MS), randomly selected from some habitats of a common tropical specie of termites from Iyeke-Ogba, Nigeria was investigated as a fifth component in concrete. The work ...

  3. The Components of Communication Systems in Universities: Their Influence on Academic Work Life

    Science.gov (United States)

    Uslu, Baris

    2018-01-01

    This research aimed to identify the components of communication systems in universities and to explore their influence on academic life. To collect data, interviews were carried out with academics from Australian universities. Thematic descriptive and content analyses were performed on the data-set. Analyses showed that the human relations unit,…

  4. Survey on organic components in NPPs

    International Nuclear Information System (INIS)

    1999-01-01

    Within the mandate of the Principal Working Group 3 of the OECD/Nuclear Energy Agency (PWG-3) specific attention is given to ageing related effects. Ageing of nuclear power plant systems, structures or components may reduce, if unmitigated, the safety margins provided in the design. With respect to the functional capability of systems, structures or components, the problems are very complex and multifaceted. Significant efforts have been undertaken in several countries and international organisations to study the influence of ageing phenomena. There is a further need for an assessment of approaches taken to ageing issues, aimed at developing and reviewing general principles, promoting technical consensus and identifying areas where further work is required. At the 19. meeting of the PWG-3 in April 1996, a decision was made to examine the ageing of organic materials in nuclear power plants (NPP). It was agreed that IPSN (France), NII (UK) and GRS (Germany) would take the lead on preparing a report on this matter. As a first step in this work a questionnaire was prepared and sent to people identified as working on this field. The response was used as an initial basis for this report, with the addition of other information from the literature and from databases on reportable events in NPP. The objective of this report is to survey ageing problems, ageing management practices and research with regard to organic materials in NPP and to identify areas where further work is required. The scope of the report basically covers all organic materials used for a range of components and working fluids of safety significance in NPP, such as electrical insulation and dielectric materials, elastomeric seals and gaskets, lubricants, adhesives and coatings. The survey of methods, experience and current research (section 3 and 4) is primarily focused on electric insulation, seals and lubricants under normal operation. This is because of the limited information available on the other

  5. Prevention: Making a shadow component a real goal in social work

    Directory of Open Access Journals (Sweden)

    Jane D. Woody

    2006-12-01

    Full Text Available Although need, opportunity, and funding for prevention programs are currently increasing, social workers do not appear to be leaders in this area of practice. Their lack of initiative in prevention will not likely change until social work education incorporates concepts from prevention science into the curriculum. This article: identifies and explains major prevention concepts and principles; discusses their congruence with social work's historical roots and current curriculum policy; and offers thoughts on integrating prevention values and content into both generalist and advanced courses. An appendix of resources is included to encourage faculties to consider how prevention could fit in the overall design of their programs.

  6. Working memory and Down syndrome.

    Science.gov (United States)

    Baddeley, A; Jarrold, C

    2007-12-01

    A brief account is given of the evolution of the concept of working memory from a unitary store into a multicomponent system. Four components are distinguished, the phonological loop which is responsible for maintaining speech-based information, the visuospatial sketchpad performing a similar function for visual information, the central executive which acts as an attentional control system, and finally a new component, the episodic buffer. The buffer comprises a temporary multidimensional store which is assumed to form an interface between the various subsystems of working memory, long-term memory, and perception. The operation of the model is then illustrated through an account of a research programme concerned with the analysis of working memory in Down syndrome.

  7. Investigation on Prefabricated Building System Skilled Component Installers

    OpenAIRE

    Nurul Rezuana Buyung; Md Azree Othuman Mydin; Abdul Naser Abdul Ghani

    2013-01-01

    In the face of an increasingly challenging era of globalization, skills and new equipments which includes prefabricated building components, known as Industrialized Building System (IBS) has been introduced towards achievement of sustainable construction. IBS is a construction system in which the components are manufactured in a factory, on or off site, positioned and assembled into complete structures with minimal additional site work. IBS requires high construction precisi...

  8. Feedback loops and temporal misalignment in component-based hydrologic modeling

    Science.gov (United States)

    Elag, Mostafa M.; Goodall, Jonathan L.; Castronova, Anthony M.

    2011-12-01

    In component-based modeling, a complex system is represented as a series of loosely integrated components with defined interfaces and data exchanges that allow the components to be coupled together through shared boundary conditions. Although the component-based paradigm is commonly used in software engineering, it has only recently been applied for modeling hydrologic and earth systems. As a result, research is needed to test and verify the applicability of the approach for modeling hydrologic systems. The objective of this work was therefore to investigate two aspects of using component-based software architecture for hydrologic modeling: (1) simulation of feedback loops between components that share a boundary condition and (2) data transfers between temporally misaligned model components. We investigated these topics using a simple case study where diffusion of mass is modeled across a water-sediment interface. We simulated the multimedia system using two model components, one for the water and one for the sediment, coupled using the Open Modeling Interface (OpenMI) standard. The results were compared with a more conventional numerical approach for solving the system where the domain is represented by a single multidimensional array. Results showed that the component-based approach was able to produce the same results obtained with the more conventional numerical approach. When the two components were temporally misaligned, we explored the use of different interpolation schemes to minimize mass balance error within the coupled system. The outcome of this work provides evidence that component-based modeling can be used to simulate complicated feedback loops between systems and guidance as to how different interpolation schemes minimize mass balance error introduced when components are temporally misaligned.

  9. The common component architecture for particle accelerator simulations

    International Nuclear Information System (INIS)

    Dechow, D.R.; Norris, B.; Amundson, J.

    2007-01-01

    Synergia2 is a beam dynamics modeling and simulation application for high-energy accelerators such as the Tevatron at Fermilab and the International Linear Collider, which is now under planning and development. Synergia2 is a hybrid, multilanguage software package comprised of two separate accelerator physics packages (Synergia and MaryLie/Impact) and one high-performance computer science package (PETSc). We describe our approach to producing a set of beam dynamics-specific software components based on the Common Component Architecture specification. Among other topics, we describe particular experiences with the following tasks: using Python steering to guide the creation of interfaces and to prototype components; working with legacy Fortran codes; and an example component-based, beam dynamics simulation.

  10. Gamma dose effects valuation on micro computing components

    International Nuclear Information System (INIS)

    Joffre, F.

    1995-01-01

    Robotics in hostile environment raises the problem of micro computing components resistance with gamma radiation cumulated dose. The current aim is to reach a dose of 3000 grays with industrial components. A methodology and an instrumentation adapted to test this type of components have been developed. The aim of this work is to present the advantages and disadvantages bound to the use of industrial components in the presence of gamma radiation. After an analysis of the criteria allowing to justify the technological choices, the different steps which characterize the selection and the assessment methodology used are explained. The irradiation and measures means now operational are mentioned. Moreover, the supply aspects of the chosen components for the design of an industrialized system is taken into account. These selection and assessment components contribute to the development and design of computers for civil nuclear robotics. (O.M.)

  11. Construction of the HTTR in-core components

    International Nuclear Information System (INIS)

    Maruyama, S.; Saikusa, A.; Shiozawa, S.; Tsuji, N.; Jinza, K.; Miki, T.

    1996-01-01

    The reactor internals of HTTR consist of graphite and metallic core support structures and shielding blocks and are designed to support core elements and to shield neutron fluence. They also have functions to restrict by-pass flow for ensuring the core cooling performance and to maintain the temperature of metallic core support structures within their design limits. The detailed design of the HTTR core support structure was approved by the government through safety review, 1990-1991. Machining of all graphite components, which consist of about 150 large blocks, was finished in September 1994 successfully. Machining and fabricating of the metallic components were also finished in September. Prior to their installation in the reactor pressure vessel (RPV), the assembly test of actual reactor internals was performed at the works to confirm above mentioned functions. The assembly test was conducted by examining fabricating precision of each component and alignment of piled-up structures, measuring circumferential coolant velocity profile in the passage between the RPV and reactor internals as well as under the core support plates with respect to structural integrity, and measuring by-pass flow rate through gaps between graphite components which may degrade core performance. The another purpose of the assembly test was to confirm the installation procedure of those components. All components were assembled at the works according to the planned procedure, and the tests were executed while assembling. As a result of the tests, measured level difference and gap width between reactor internals were negligible from core thermal and hydraulic performance point of view. Coolant flows uniformly in circumferential direction at any axial level in the RPV. By-pass flow rate was found to be suppressed sufficiently and far less than the design limit. (J.P.N.)

  12. Expanding to teleoperation of a tight modular workshop for dismantling radioactive components

    International Nuclear Information System (INIS)

    Gasc, B.

    1990-01-01

    The CEA (French Nuclear Energy Commission) in connection with TECHNICATOME developed a tight modular workshop for the dismantling of AT1 plant facilities in LA HAGUE. This workshop constructed of reusable stainless steel panels assembled by bolting provides a tight and decontaminable working zone compatible with any building configuration. This being the case, the operators bearing ventilated suits may work under the best safety conditions on alpha-contaminated materials. For the purpose of expanding the working capacities of this workshop it was decided to develop special components for teleoperation from the outside as in a conventional cell. To meet this objective which is within the scope of the contract signed with the CEC, the following components were developed and constructed: - manipulator holder panel, - swivelling hatch panel, - wall equipment sealed transfer device and, - modular biological protection. The design, construction and tests of these new components led to their qualification and further incorporation in the list of components of the modular workshop liable to be used for teleoperation procedures

  13. Dual Component Removable Partial Denture shows improved ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-02-18

    Feb 18, 2009 ... 2Faculty of Dentistry, the University of Hong Kong, Hong Kong. 3Department of ... an example of poor oral condition caused mainly by periodontitis, and ... working model of the Dual Component Removable Partial Denture.

  14. A refinement driven component-based design

    DEFF Research Database (Denmark)

    Chen, Zhenbang; Liu, Zhiming; Ravn, Anders Peter

    2007-01-01

    the work on the Common Component Modelling Example (CoCoME). This gives evidence that the formal techniques developed in rCOS can be integrated into a model-driven development process and shows where it may be integrated in computer-aided software engineering (CASE) tools for adding formally supported...

  15. Tests of qualification of national components of nuclear power plants under design basis accident

    International Nuclear Information System (INIS)

    Mesquita, A.Z.

    1990-01-01

    With the purpose of qualifying national components of nuclear power plants, whose working must be maintained during and after an accident, the Thermohydraulic Division of CDTN have done tests to check the equipment stability, under Design Basis Accident conditions. Until this moment, the following components were tested: electrical junction boxes (connectors); coating systems for wall, inside cover and steel containment; hydraulics components of personnel and equipment airlock. This work describes the test instalation, the tests performed and its results. The components tested, in a general way, fulfil the specified requirements. (author) [pt

  16. TracWorks - global fuel assembly data management

    International Nuclear Information System (INIS)

    Cooney, B.F.

    1997-01-01

    The TracWorks Data Management System is a workstation-based software product that provides a utility with a single, broadly available, regularly updated source for virtually every data item available for a fuel assembly or core component. TracWorks is designed to collect, maintain and provide information about assembly and component locations and movements during the refuelling process and operation, assembly burnup and isotopic inventory (both in-core and out-of-core), pin burnup and isotopics for pins that have been removed from their original assemblies, assembly and component inspection results (including video) and manufacturing data provided by the fabrication plant. (UK)

  17. Issues and approaches in risk-based aging analyses of passive components

    International Nuclear Information System (INIS)

    Uryasev, S.P.; Samanta, P.K.; Vesely, W.E.

    1994-01-01

    In previous NRC-sponsored work a general methodology was developed to quantify the risk contributions from aging components at nuclear plants. The methodology allowed Probabilistic Risk Analyses (PRAs) to be modified to incorporate the age-dependent component failure rates and also aging maintenance models to evaluate and prioritize the aging contributions from active components using the linear aging failure rate model and empirical components aging rates. In the present paper, this methodology is extended to passive components (for example, the pipes, heat exchangers, and the vessel). The analyses of passive components bring in issues different from active components. Here, we specifically focus on three aspects that need to be addressed in risk-based aging prioritization of passive components

  18. Perception of orchestral musicians about work environment and conditions

    Directory of Open Access Journals (Sweden)

    Clarissa Stefani Teixeira

    2014-04-01

    Full Text Available The objective of this study was to investigate the perception of 11 orchestral string (viola and violin musicians of both genders with respect to their work environment and conditions. We applied a questionnaire with demographic information and the scale Profile of Work Environment and Working Conditions by Nahas et al. (2009, which analyzes the following components: physical environment, social environment, development and professional achievement, salary and benefits, and social relevance. The social environment component presented the highest score - 8.00 (1.50 points, followed by professional achievement - 7.11 (1.96 points, and physical environment - 6.89 (0.93 points. The salary and benefits provided by the orchestra presented the lowest score - 6.78 (1.56 points. In general, the musicians showed positive perceptions of the components related to work environment and working conditions. However, remuneration and social relevance are work bases that could contribute to improve the working conditions of these professionals.

  19. Peach Bottom HTGR decommissioning and component removal

    International Nuclear Information System (INIS)

    Kohler, E.J.; Steward, K.P.; Iacono, J.V.

    1977-07-01

    The prime objective of the Peach Bottom End-of-Life Program was to validate specific HTGR design codes and predictions by comparison of actual and predicted physics, thermal, fission product, and materials behavior in Peach Bottom. Three consecutive phases of the program provide input to the HTGR design methods verifications: (1) Nondestructive fuel and circuit gamma scanning; (2) removal of steam generator and primary circuit components; and (3) Laboratory examinations of removed components. Component removal site work commenced with establishment of restricted access areas and installation of controlled atmosphere tents to retain relative humidity at <30%. A mock-up room was established to test and develop the tooling and to train operators under simulated working conditions. Primary circuit ducting samples were removed by trepanning, and steam generator access was achieved by a combination of arc gouging and grinding. Tubing samples were removed using internal cutters and external grinding. Throughout the component removal phase, strict health physics, safety, and quality assurance programs were implemented. A total of 148 samples of primary circuit ducting and steam generator tubing were removed with no significant health physics or safety incidents. Additionally, component removal served to provide access fordetermination of cesium plateout distribution by gamma scanning inside the ducts and for macroexamination of the steam generator from both the water and helium sides. Evaluations are continuing and indicate excellent performance of the steam generator and other materials, together with close correlation of observed and predicted fission product plateout distributions. It is concluded that such a program of end-of-life research, when appropriately coordinated with decommissioning activities, can significantly advance nuclear plant and fuel technology development

  20. Workaholism - Work And Extra-Work Satisfactions - And Psychological Well-Being Among Professors In Turkey

    OpenAIRE

    KOYUNCU, Mustafa; FIKSENBAUM, Lisa; BURKE, Ronald J.

    2007-01-01

    Purpose – This research examined the relationship of three workaholism components identified by Spence and Robbins (1992) and work, extra-work and psychological health outcomes. Design/Methodology/Approach – Data were collected from 406 professors in Turkey (243 males and 165 females) using an internet-based survey. Measures included personal and situational characteristics, possible workaholism antecedents (beliefs and fears, organizational values supporting work personal life imbalance), wo...

  1. Working memory contributions to reading comprehension components in middle childhood children.

    Science.gov (United States)

    Chrysochoou, Elisavet; Bablekou, Zoe; Tsigilis, Nikolaos

    2011-01-01

    This study examined working memory contributions to reading comprehension subskills in Greek children (mean age 9 years, 1 month). The phonological loop of the Baddeley and Hitch working memory model was assessed with 3 recall tasks (words, nonwords, and digits) and a word list matching task. The central executive (CE) was assessed with 3 tasks (listening, counting, and backward digit recall). Participants were also given a receptive vocabulary task, a reading fluency task, and written stories accompanied by comprehension questions. Canonical correlation analyses showed that the comprehension variables were related to the CE rather than the phonological loop measures. CE functions were more strongly associated with elaborative inference generation (involving significant offline processing) and comprehension control (involving metacognitive monitoring). Smaller yet significant associations were observed between the CE and the necessary inference and literal comprehension measures, whereas a moderate relationship was found in the case of the simile comprehension variable. Among the CE variables, listening recall demonstrated the highest loading on the canonical function, followed by moderate yet significant counting and backward digit recall loadings. Vocabulary was found to fully mediate several associations between working memory and comprehension measures; however, the relationship between listening recall and elaborative inferences was partly mediated. Reading fluency and, on several occasions, Greek vocabulary knowledge did not mediate the relationships between CE measures and comprehension skills assessed. This study demonstrates the usefulness of CE measures for identifying young children's possible difficulties in carrying out specific reading comprehension processes.

  2. EU R and D on divertor components

    International Nuclear Information System (INIS)

    Merola, M.; Daenner, W.; Pick, M.

    2005-01-01

    Since the last SOFT conference held in Helsinki in 2002, substantial progress has been made in the EU R and D on the divertor components. A number of activities have been completed and new ones have been launched. The present paper gives an update of the works carried out by the EU Participating Team in support of the development of the divertor, which is one of the most challenging components of the next-step ITER machine. The following topics are covered: (1) the further development and consolidation of suitable technologies for the production of high heat-flux components, which culminated with the successful manufacturing and testing of a full-scale vertical target prototype; (2) the completion of the post-irradiation testing of divertor mock-ups and samples; (3) the preparation for the hydraulic and assembly tests of a complete set of full-scale divertor components; (4) the on-going R and D on the definition of workable acceptance criteria for the procurement of ITER high heat-flux components; (5) the activities in support of the divertor design

  3. Durability of building materials and components

    CERN Document Server

    Delgado, JMPQ

    2013-01-01

    Durability of Building Materials and Components provides a collection of recent research works to contribute to the systematization and dissemination of knowledge related to the long-term performance and durability of construction and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of durability, service life prediction methodologies, the durability approach for historical and old buildings, asset and maintenance management and on the durability of materials, systems and components. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.

  4. Two-component feedback loops and deformed mechanics

    International Nuclear Information System (INIS)

    Tourigny, David S.

    2015-01-01

    It is shown that a general two-component feedback loop can be viewed as a deformed Hamiltonian system. Some of the implications of using ideas from theoretical physics to study biological processes are discussed. - Highlights: • Two-component molecular feedback loops are viewed as q-deformed Hamiltonian systems. • Deformations are reversed using Jackson derivatives to take advantage of working in the Hamiltonian limit. • New results are derived for the particular examples considered. • General deformations are suggested to be associated with a broader class of biological processes

  5. Coating power RF components with TiN

    International Nuclear Information System (INIS)

    Kuchnir, M.; Hahn, E.

    1995-03-01

    A facility for coating RF power components with thin films of Ti and/or TiN has been in operation for some time at Fermilab supporting the Accelerator Division RF development work and the TESLA program. It has been experimentally verified that such coatings improve the performance of these components as far as withstanding higher electric fields. This is attributed to a reduction in the secondary electron emission coefficient of the surfaces when coated with a thin film containing titanium. The purpose of this Technical Memorandum is to describe the facility and the procedure used

  6. Abstract: Body Work

    DEFF Research Database (Denmark)

    Otto, Lene

    2012-01-01

    This panel will explore the usefulness of the term ‘body work’ in cultural history. Body work is understood as work focusing on the bodies of others as component in a range of occupations in health and social care, as well as in unpaid work in the family. How can the notion of body work inform...... cultural history of health and illness whether through a micro-social focus on the intercorporeal aspects of work in health and social care, or through clarifying our understanding of the times and spaces of work, or through highlighting the relationship between mundane body work and global processes....... The British sociologist Julia Twigg has introduced and explored the term `bodywork', most recently in Body Work in Health and Social Care - Critical Themes, New Agendas (2011). She extends the term body work from applying to the work that individuals undertake on their own bodies, often as part of regimens...

  7. Today's work experience: Precursors of both how I feel and how Ithink about my job?

    Directory of Open Access Journals (Sweden)

    Achim Elfering

    2016-04-01

    Full Text Available Antecedents of affective versus cognitive components of daily job satisfaction were compared. According to the affective events theory, the affective component should relate more strongly to state affect and affective work experiences than the cognitive component. In multilevel regression analyses of 280 daily reports from 40 participants, within-person variation was lower in the cognitive component (24% than in the affective component (54%. Beyond state affect and trait affectivity, positive valence of work experiences had an incremental value only in the prediction of the affective component. The affective component is more reactive to daily work experiences than the cognitive component. Whenever the link between work and daily job satisfaction is reviewed, the components of job satisfaction measures should be considered as a moderator.

  8. Working memory and the hippocampus.

    Science.gov (United States)

    Baddeley, Alan; Jarrold, Christopher; Vargha-Khadem, Faraneh

    2011-12-01

    A number of studies suggest an important role for the hippocampus in tasks involving visuospatial or relational working memory. We test the generality of this proposal across tasks using a battery designed to investigate the various components of working memory, studying the working memory performance of Jon, who shows a bilateral reduction in hippocampal volume of approximately 50%, comparing him to a group of 48 college students. We measure performance on four complex working memory span measures based on combining visuospatial and verbal storage with visuospatial or verbal concurrent processing as well as measuring Jon's ability to carry out the component storage and processing aspects of these tasks. Jon performed at a consistently high level across our range of tasks. Possible reasons for the apparent disparity between our own findings and earlier studies showing a hippocampal deficit are discussed in terms of both the potential differences in the demands placed on relational memory and of the proposed distinction between egocentric and allocentric visuospatial processing.

  9. Interprofessional leadership training in MCH social work.

    Science.gov (United States)

    Pecukonis, Edward; Doyle, Otima; Acquavita, Shauna; Aparicio, Elizabeth; Gibbons, Maya; Vanidestine, Todd

    2013-01-01

    The need to train health social workers to practice interprofessionally is an essential goal of social work education. Although most health social workers have exposure to multidisciplinary practice within their field work, few social work education programs incorporate interprofessional learning as an integrated component of both course work and field experiences (McPherson, Headrick, & Moss, 2001; Reeves, Lewin, Espin, & Zwaranstein, 2010; Weinstein, Whittington, & Leiba, 2003). In addition, little is written about the kinds of curricula that would effectively promote interdisciplinary training for social work students. These findings are particularly puzzling since there is increasing and compelling evidence that interdisciplinary training improves health outcomes (IOM, 2001). This article describes a social work education program that incorporates an Interprofessional education and leadership curriculum for Maternal and Child Health Social Work (MCHSW) at the University of Maryland's School of Social Work. The University of Maryland's Interprofesisonal Training Model is described along with the components needed to formulate an interdisciplinary learning experience. Various outcomes and lessons learned are discussed.

  10. Assessing Working Memory in Children: The Comprehensive Assessment Battery for Children – Working Memory (CABC-WM)

    OpenAIRE

    Cabbage, Kathryn; Brinkley, Shara; Gray, Shelley; Alt, Mary; Cowan, Nelson; Green, Samuel; Kuo, Trudy; Hogan, Tiffany P.

    2017-01-01

    The Comprehensive Assessment Battery for Children - Working Memory (CABC-WM) is a computer-based battery designed to assess different components of working memory in young school-age children. Working memory deficits have been identified in children with language-based learning disabilities, including dyslexia1 2 and language impairment3 4, but it is not clear whether these children exhibit deficits in subcomponents of working memory, such as visuospatial or phonological working memory. The C...

  11. Characteristics of outage radiation fields around various reactor components

    International Nuclear Information System (INIS)

    Verzilov, Y.; Husain, A.; Corbin, G.

    2008-01-01

    Full text: Activity monitoring surveys, consisting of gamma spectroscopy and dose rate measurements, of various CANDU station components such as the reactor face, feeder cabinet, steam generators and moderator heat exchangers are often performed during shutdown in order to trend the transport of activity around the primary heat transport and moderator systems. Recently, the increased dose expenditure for work such as feeder inspection and replacement in the reactor vault has also spurred interest in improved characterization of the reactor face fields to facilitate better ALARA decision making and hence a reduction in future dose expenditures. At present, planning for reactor face work is hampered by insufficient understanding of the relative contribution of the various components to the overall dose. In addition to the increased dose expenditure for work at the reactor face, maintenance work associated with horizontal flux detectors and liquid injection systems has also resulted in elevated dose expenditures. For instance at Darlington, radiation fields in the vicinity of horizontal flux detectors (HFD) and Liquid Injection Shutdown System (LISS) nozzle bellows are trending upwards with present contact fields being in the range 16-70 rem/h and working distance fields being in the range 100-500 mrem/h. This paper presents findings based on work currently being funded by the CANDU Owners Group. Measurements were performed at Ontario Power Generation's Pickering and Darlington nuclear stations. Specifically, the following are addressed: Characteristics of Reactor Vault Fields; Characteristics of Steam Generator Fields; Characteristics of Moderator Heat Exchanger Fields. Measurements in the reactor vault were performed at the reactor face, along the length of end fittings, along the length of feeders, at the bleed condenser and at the HFD and LISS nozzle bellows. Steam generator fields were characterized at various elevations above the tube sheet, with and without the

  12. Working time flexibility components and working time regimes in Europe: using company-level data across 21 countries

    NARCIS (Netherlands)

    Chung, H.; Tijdens, K.

    2013-01-01

    Working time flexibility comprises a wide variety of arrangements, from part-time, overtime, to long-term leaves. Theoretical approaches to grouping these arrangements have been developed, but empirical underpinnings are rare. This article investigates the bundles that can be found for various

  13. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  14. Statistics of Shared Components in Complex Component Systems

    Science.gov (United States)

    Mazzolini, Andrea; Gherardi, Marco; Caselle, Michele; Cosentino Lagomarsino, Marco; Osella, Matteo

    2018-04-01

    Many complex systems are modular. Such systems can be represented as "component systems," i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf's law. Such "laws" affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the "core" genome in bacteria.

  15. Risk Management of Large Component in Decommissioning

    International Nuclear Information System (INIS)

    Nah, Kyung Ku; Kim, Tae Ryong

    2014-01-01

    The need for energy, especially electric energy, has been dramatically increasing in Korea. Therefore, a rapid growth in nuclear power development has been achieved to have about 30% of electric power production. However, such a large nuclear power generation has been producing a significant amount of radioactive waste and other matters such as safety issue. In addition, owing to the severe accidents at the Fukushima in Japan, public concerns regarding NPP and radiation hazard have greatly increased. In Korea, the operation of KORI 1 has been scheduled to be faced with end of lifetime in several years and Wolsong 1 has been being under review for extending its life. This is the reason why the preparation of nuclear power plant decommissioning is significant in this time. Decommissioning is the final phase in the life-cycle of a nuclear facility and during decommissioning operation, one of the most important management in decommissioning is how to deal with the disused large component. Therefore, in this study, the risk in large component in decommissioning is to be identified and the key risk factor is to be analyzed from where can be prepared to handle decommissioning process safely and efficiently. Developing dedicated acceptance criteria for large components at disposal site was analyzed as a key factor. Acceptance criteria applied to deal with large components like what size of those should be and how to be taken care of during disposal process strongly affect other major works. For example, if the size of large component was not set up at disposal site, any dismantle work in decommissioning is not able to be conducted. Therefore, considering insufficient time left for decommissioning of some NPP, it is absolutely imperative that those criteria should be laid down

  16. Risk Management of Large Component in Decommissioning

    Energy Technology Data Exchange (ETDEWEB)

    Nah, Kyung Ku; Kim, Tae Ryong [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2014-10-15

    The need for energy, especially electric energy, has been dramatically increasing in Korea. Therefore, a rapid growth in nuclear power development has been achieved to have about 30% of electric power production. However, such a large nuclear power generation has been producing a significant amount of radioactive waste and other matters such as safety issue. In addition, owing to the severe accidents at the Fukushima in Japan, public concerns regarding NPP and radiation hazard have greatly increased. In Korea, the operation of KORI 1 has been scheduled to be faced with end of lifetime in several years and Wolsong 1 has been being under review for extending its life. This is the reason why the preparation of nuclear power plant decommissioning is significant in this time. Decommissioning is the final phase in the life-cycle of a nuclear facility and during decommissioning operation, one of the most important management in decommissioning is how to deal with the disused large component. Therefore, in this study, the risk in large component in decommissioning is to be identified and the key risk factor is to be analyzed from where can be prepared to handle decommissioning process safely and efficiently. Developing dedicated acceptance criteria for large components at disposal site was analyzed as a key factor. Acceptance criteria applied to deal with large components like what size of those should be and how to be taken care of during disposal process strongly affect other major works. For example, if the size of large component was not set up at disposal site, any dismantle work in decommissioning is not able to be conducted. Therefore, considering insufficient time left for decommissioning of some NPP, it is absolutely imperative that those criteria should be laid down.

  17. Statistics of Shared Components in Complex Component Systems

    Directory of Open Access Journals (Sweden)

    Andrea Mazzolini

    2018-04-01

    Full Text Available Many complex systems are modular. Such systems can be represented as “component systems,” i.e., sets of elementary components, such as LEGO bricks in LEGO sets. The bricks found in a LEGO set reflect a target architecture, which can be built following a set-specific list of instructions. In other component systems, instead, the underlying functional design and constraints are not obvious a priori, and their detection is often a challenge of both scientific and practical importance, requiring a clear understanding of component statistics. Importantly, some quantitative invariants appear to be common to many component systems, most notably a common broad distribution of component abundances, which often resembles the well-known Zipf’s law. Such “laws” affect in a general and nontrivial way the component statistics, potentially hindering the identification of system-specific functional constraints or generative processes. Here, we specifically focus on the statistics of shared components, i.e., the distribution of the number of components shared by different system realizations, such as the common bricks found in different LEGO sets. To account for the effects of component heterogeneity, we consider a simple null model, which builds system realizations by random draws from a universe of possible components. Under general assumptions on abundance heterogeneity, we provide analytical estimates of component occurrence, which quantify exhaustively the statistics of shared components. Surprisingly, this simple null model can positively explain important features of empirical component-occurrence distributions obtained from large-scale data on bacterial genomes, LEGO sets, and book chapters. Specific architectural features and functional constraints can be detected from occurrence patterns as deviations from these null predictions, as we show for the illustrative case of the “core” genome in bacteria.

  18. Investigations into High Temperature Components and Packaging

    Energy Technology Data Exchange (ETDEWEB)

    Marlino, L.D.; Seiber, L.E.; Scudiere, M.B.; M.S. Chinthavali, M.S.; McCluskey, F.P.

    2007-12-31

    The purpose of this report is to document the work that was performed at the Oak Ridge National Laboratory (ORNL) in support of the development of high temperature power electronics and components with monies remaining from the Semikron High Temperature Inverter Project managed by the National Energy Technology Laboratory (NETL). High temperature electronic components are needed to allow inverters to operate in more extreme operating conditions as required in advanced traction drive applications. The trend to try to eliminate secondary cooling loops and utilize the internal combustion (IC) cooling system, which operates with approximately 105 C water/ethylene glycol coolant at the output of the radiator, is necessary to further reduce vehicle costs and weight. The activity documented in this report includes development and testing of high temperature components, activities in support of high temperature testing, an assessment of several component packaging methods, and how elevated operating temperatures would impact their reliability. This report is organized with testing of new high temperature capacitors in Section 2 and testing of new 150 C junction temperature trench insulated gate bipolar transistor (IGBTs) in Section 3. Section 4 addresses some operational OPAL-GT information, which was necessary for developing module level tests. Section 5 summarizes calibration of equipment needed for the high temperature testing. Section 6 details some additional work that was funded on silicon carbide (SiC) device testing for high temperature use, and Section 7 is the complete text of a report funded from this effort summarizing packaging methods and their reliability issues for use in high temperature power electronics. Components were tested to evaluate the performance characteristics of the component at different operating temperatures. The temperature of the component is determined by the ambient temperature (i.e., temperature surrounding the device) plus the

  19. Digital Components in Swedish NPP Power Systems

    International Nuclear Information System (INIS)

    Karlsson, Mattias; Eriksson, Tage

    2015-01-01

    Swedish nuclear power plants have over the last 20 years of operation modernised or exchanged several systems and components of the electrical power system. Within these works, new components based on digital technology have been employed in order to realize functionality that was previously achieved by using electro-mechanical or analogue technology. Components and systems such as relay protection, rectifiers, inverters, variable speed drives and diesel-generator sets are today equipped with digital components. Several of the systems and components fulfil functions with a safety-role in the NPP. Recently, however, a number of incidents have occurred which highlight deficiencies in the design or HMI of the equipment, which warrants questions whether there are generic problems with some applications of digital components that needs to be addressed. The use of digital components has presented cost effective solutions, or even the only available solution on the market enabling a modernisation. The vast majority of systems using digital components have been operating without problems and often contribute to improved safety but the challenge of non-detectable, or non-identifiable, failure modes remain. In this paper, the extent to which digital components are used in Swedish NPP power systems will be presented including a description of typical applications. Based on data from maintenance records and fault reports, as well as interviews with designers and maintenance personnel, the main areas where problems have been encountered and where possible risks have been identified will be described. The paper intends to investigate any 'tell-tales' that could give signals of unwanted behaviour. Furthermore, particular benefits experienced by using digital components will be highlighted. The paper will also discuss the safety relevance of these findings and suggest measures to improve safety in the application of digital components in power systems. (authors)

  20. TracWorksTM-global fuel assembly data management

    International Nuclear Information System (INIS)

    Cooney, B.F.

    1997-01-01

    The TracWorks TM Data Management System is a workstation-based software product that provides a utility with a single, broadly available, regularly updated source for virtually every data item available for a fuel assembly or core component. TracWorks is designed to collect, maintain and provide information about assembly and component locations and movements during the refueling process and operation, assembly burnup and isotopic inventory (both in-core and out-of-core), pin burnup and isotopics for pins that have been removed from their original assemblies, assembly and component inspection results (including video) and manufacturing data provided by the fabrication plant

  1. Work, employment, and mental illness: expanding the domain of Canadian social work.

    Science.gov (United States)

    Shankar, Janki; Barlow, Constance A; Khalema, Ernest

    2011-01-01

    Despite established evidence that work and employment are an important component of recovery for people who experience mental illness, social work education in Canada seldom offers graduate training or courses on the significance of work in peoples' lives or on the practices involved in helping to gain and retain employment for these individuals. In this article the authors argue that the high levels of unemployment among people who experience mental illness, and the rising incidence of mental health and addictions issues in workplaces, offer the opportunity, as well as the mandate, for social work educators to provide professional education in the area of employment support and assistance.

  2. Component-based development process and component lifecycle

    NARCIS (Netherlands)

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  3. Manufacturing requirements of reactor assembly components for PFBR (Paper No. 041)

    International Nuclear Information System (INIS)

    Murty, C.G.K.; Bhoje, S.B.

    1987-02-01

    This paper enumerates the requirements of 500 MWe Prototype Fast Breeder Reactor (PFBR) components and considering the present state of art of Indian industry an analysis is made on the challenges to be faced in manufacture highlighting the areas needing development. The large sizes and weights of the components coupled with the limitations on shop facilities and ODC transport, demand part of the fabrication to be done at shop and balance assembly work as well as certain assembly machining operations to be done at site work shop. The stringent geometrical tolerances coupled with extensive destructive and non-destructive examinations call for balanced and low heat input welding techniques and special inspection equipment like electronic co-ordinate determination system. The present paper deals with the specific manufacturing problems of the main reactor components. (author)

  4. Translation of Onomatopoetic Component in Onomastics

    Directory of Open Access Journals (Sweden)

    Анна Владимировна Соколова

    2015-12-01

    Full Text Available This article covers the topic of the description of translation strategies of onomatopoetic component of proper names. The term of onomatopoetic proper names is introduced for the first time. The article is the fist work that gives a view of onomatopoetic component in proper names on the material of English proper names, product names, electronic resources, theatre plays and cartoon titles. Onomatopoeia in onomastics is seen form the viewpoint of sociolinguistics. Being an aspect of literary onomastics, onomatopoetic proper names are considered to be a functional and semantic word mark (meaning-creating and text-forming that serves as an individualizing and characteristic device. However examples of onomatopoeia in onomastics are seen not only in imaginative literature but also in advertisements and commercials. Onomatopoetic component is a unique device that allows to verbalize lingvocultural aspects of proper names. These names are pleasant to hear and easy to remember. They help to make up brand names. Translation strategies include two techniques: translator often resorts to borrowings, in other words transliterateration or transcription of the original onomatopoeia, or makes situational equivalents like occasionalisms or oral speech equivalents to render the expressive, stylistic and evaluative components of meaning of such proper names. This article will give an example of both these techniques and deduce the most affective strategies that can be applied to translation of onomatopoetic component of proper names.

  5. The Job Demands-Resources model as predictor of work identity and work engagement: A comparative analysis

    OpenAIRE

    Roslyn De Braine; Gert Roodt

    2011-01-01

    Orientation: Research shows that engaged employees experience high levels of energy and strong identification with their work, hence this study’s focus on work identity and dedication. Research purpose: This study explored possible differences in the Job Demands-Resources model (JD-R) as predictor of overall work engagement, dedication only and work-based identity, through comparative predictive analyses. Motivation for the study: This study may shed light on the dedication component o...

  6. Surface modification method for reactor incore structural component

    International Nuclear Information System (INIS)

    Obata, Minoru; Sudo, Akira.

    1996-01-01

    A large number of metal or ceramic small spheres accelerated by pressurized air are collided against a surface of a reactor incore structures or a welded surface of the structural components, and then finishing is applied by polishing to form compression stresses on the surface. This can change residual stresses into compressive stress without increasing the strength of the surface. Accordingly, stress corrosion crackings of the incore structural components or welded portions thereof can be prevented thereby enabling to extend the working life of equipments. (T.M.)

  7. Thermal Simulation of the Component Rework Profile Temperature

    OpenAIRE

    Nurminen, Janne

    2015-01-01

    The aim of this study was to clarify the possibilities and feasibility of the ther-mal simulation for the modeling of the rework process. The rework process modeling could enable an easy and fast access to the component and PWB level thermally critical effects like over and under heating of the component during the rework process. The modeling could also be used as a help of the real rework profile definition at an early phase of the electrical device development. The work includes a...

  8. The effects of attachment components on formal-operational thinking

    OpenAIRE

    Vukčević Branimir

    2010-01-01

    In this work our aim is to examine how the components of attachment influence the thinking development of adolescents in familial context. We investigated the components of attachment: unresolved family traumatisation, the use of external security base, fear of loss of external security base, negative self concept, negative other concept, capacity for mentalisation, low control of anger. We used a revised Questionnaire for Assessment of Adult and Adolescent Attachment (in original: UPIPAV-R)....

  9. Work-related limitations and return-to-work experiences in prolonged fatigue: workers' perspectives before and after vocational treatment.

    Science.gov (United States)

    Joosen, Margot C W; Frings-Dresen, Monique H W; Sluiter, Judith K

    2011-01-01

    To gain insight into fatigued workers' perspectives regarding work experience before and after receiving vocational rehabilitation (VR) treatments. A qualitative survey was conducted using semi-structured interviews with 21 fatigued workers who attended an outpatient multi-component VR treatment. Six months after treatment, work-related limitations and employed VR strategies at work before treatment were explored. Next, VR treatment experiences regarding return-to-work (RTW) were explored. Two researchers performed partially independent, qualitative analyses that revealed topics, discussed by the project team, and organised into domains, categories and sub-categories. Work-related limitations were: symptoms of prolonged fatigue, personal limitations (e.g. lack of self-reflection on individual capacity and limitations), interpersonal factors, activities and conditions at work and life/work imbalance. Before the treatment, VR strategies such as work adaptations, well-intentioned advice and support, and/or referral to psychological or physical care were employed. VR treatment experiences on RTW were: personal challenges (e.g. gained awareness and coping skills), improved activities during work, work adaptations and unresolved problems (e.g. remaining fatigue symptoms and sickness absence). New information about work experiences before and after multi-component VR treatments in workers with prolonged fatigue may help employers, occupational physicians and other caregivers to develop VR strategies that better meet individuals' needs.

  10. Extraction of Independent Structural Images for Principal Component Thermography

    Directory of Open Access Journals (Sweden)

    Dmitry Gavrilov

    2018-03-01

    Full Text Available Thermography is a powerful tool for non-destructive testing of a wide range of materials. Thermography has a number of approaches differing in both experiment setup and the way the collected data are processed. Among such approaches is the Principal Component Thermography (PCT method, which is based on the statistical processing of raw thermal images collected by thermal camera. The processed images (principal components or empirical orthogonal functions form an orthonormal basis, and often look like a superposition of all possible structural features found in the object under inspection—i.e., surface heating non-uniformity, internal defects and material structure. At the same time, from practical point of view it is desirable to have images representing independent structural features. The work presented in this paper proposes an approach for separation of independent image patterns (archetypes from a set of principal component images. The approach is demonstrated in the application of inspection of composite materials as well as the non-invasive analysis of works of art.

  11. A Linear Criterion to sort Color Components in Images

    Directory of Open Access Journals (Sweden)

    Leonardo Barriga Rodriguez

    2017-01-01

    Full Text Available The color and its representation play a basic role in Image Analysis process. Several methods can be beneficial whenever they have a correct representation of wave-length variations used to represent scenes with a camera. A wide variety of spaces and color representations is founded in specialized literature. Each one is useful in concrete circumstances and others may offer redundant color information (for instance, all RGB components are high correlated. This work deals with the task of identifying and sorting which component from several color representations offers the majority of information about the scene. This approach is based on analyzing linear dependences among each color component, by the implementation of a new sorting algorithm based on entropy. The proposal is tested in several outdoor/indoor scenes with different light conditions. Repeatability and stability are tested in order to guarantee its use in several image analysis applications. Finally, the results of this work have been used to enhance an external algorithm to compensate the camera random vibrations.

  12. iWork portable genius

    CERN Document Server

    Hart-Davis, Guy

    2014-01-01

    Maximize your use of Apple's unique office productivity suite Dedicated Mac fans love the convenience and practicality of Numbers spreadsheets, Pages word processing, and Keynote presentations, the components of the iWork suite. This guide cuts to the chase, packed with tips and advice for getting the most from the newest version of these applications. It provides the basics on each application and how they work together, intermediate information, and cool ways to enhance your presentations and documents and create reports that analyze and interpret your data.The iWork productivity suite provi

  13. Safety prediction for basic components of safety-critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2000-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  14. A Weighing Algorithm for Checking Missing Components in a Pharmaceutical Line

    Directory of Open Access Journals (Sweden)

    Alessandro Silvestri

    2014-11-01

    image. The goal of the present work is the development of an algorithm able to optimize the production line of a pharmaceutical firm. In particular, the proposed weighing procedure allows both checking missing components in packaging and minimizing false rejects of packages by dynamic scales. The main problem is the presence at the same time, in the same package, of different components with different variable weights. The consequence is uncertainty in recognizing the absence of one or more components.

  15. Using TinyOS Components for the Design of an Adaptive Ubiquitous System

    NARCIS (Netherlands)

    Kaya, O.S.; Durmaz, O.; Dulman, S.O.; Gemesi, R.; Jansen, P.G.; Havinga, Paul J.M.

    2005-01-01

    This work is an initiative attempt toward component-based software engineering in ubiquitous computing systems. Software components cooperate in a distributed manner to meet a demand, and adapt their software bindings during run-time depending on the context information. There are two main research

  16. Using TinyOS Components for the Design of an Adaptive Ubiquitous System

    NARCIS (Netherlands)

    Kaya, O.S.; Durmaz, O.; Dulman, S.O.; Gemesi, R.; Jansen, P.G.; Havinga, Paul J.M.

    This work is an initiative attempt toward component-based software engineering in ubiquitous computing systems. Software components cooperate in a distributed manner to meet a demand, and adapt their software bindings during run-time depending on the context information. There are two main research

  17. Qualification of electronic components for use in nuclear power plants

    International Nuclear Information System (INIS)

    Zorrilla, J.; Antonaccio, E; Luraschi, C.; Rodriguez, F.; Ranalli, J.; Ponce, M.; Dotro, R.; Guinda, J.

    2013-01-01

    There are a large number of instrument subjected to different service condition in a NPP. For instance different instruments can be found working in environment where the dose rate goes from negligible levels up to very harsh radiation levels. When technical specification and or equipment purchasing should be carried out it is possible to find the total leak of qualified instrument. In this context there is a need of dedicated qualification. In this work two different radiation resistance for two different I&C equipment/component were studies. The first I&C equipment was an LVDT (liner variable differential transformer). This equipment was tested while it was actuated in a strong gamma field in order to evaluate possible electromagnetic interferences a number of cycles equivalent to one year of service. After that the component was subjected to accelerated radiation aging and then actuated test under gamma field were carried out. The second I&C component to be tested was an (author)

  18. Neural activation within components of verbal working memory following sleep loss

    OpenAIRE

    McKenna, Benjamin Scott

    2011-01-01

    Total sleep deprivation (TSD) leads to neurobehavioral changes in experimental tasks of alertness, attention, learning, and motor responses. However, results from working memory (WM) studies are more equivocal. WM comprises multiple cognitive processes and the cerebral basis of this differential vulnerability is not known. The current experiment utilized tasks employing parametric manipulations within an event-related functional magnetic resonance imaging (fMRI) design to better understand th...

  19. An interrelation of physical working capacity and body component composition indicators of amateur athletes

    Directory of Open Access Journals (Sweden)

    Zoya Gorenko

    2017-09-01

    Full Text Available Purpose: determine the features of the body component composition and the level of physical performance, as well as the structure of the correlation between these indicators in amateur athletes. Material & Methods: in conditions of the test with physical load with stepwise increasing power in the 71-st physically active person, the reaction of the cardio-respiratory system to physical activity. The body component composition was determined by the bioelectrical impedance method. Result: in amateur athletes, the relative VO2max and power ratings are positively correlated with the relative body water content and have a negative relationship with age, body weight, body mass index, fat content. Oxygen pulse with a high degree of probability positively correlated with body weight, body mass index, metabolic rate, fat-free mass, water content and predictable muscle mass in all body segments. Conclusion: Conducted studies indicate a sufficient level of aerobic capacity, overall performance, the efficiency of the cardiac cycle, the functioning of the О2-transport system and skeletal muscles ability to absorb oxygen from the amateur athletes, and excess fat tissue negatively affects physical performance, overall endurance and achieving high sports results in sports on the endurance.

  20. A new multi-component hierarchy and its integrable expanding model

    International Nuclear Information System (INIS)

    Dong Huanhe; Liang Xiangqian

    2008-01-01

    A set of multi-component matrix Lie algebra is constructed, it follows that a type of new loop algebra is presented and multi-component integrable hierarchy is obtained. Furthermore, the loop algebra is expanded into a larger one and a type of integrable coupling system is worked out. As reduction of the hierarchy, some well-known hierarchy such as DNLS, KN, CLL hierarchy are established

  1. Energetic Variational Approach to Multi-Component Fluid Flows

    Science.gov (United States)

    Kirshtein, Arkadz; Liu, Chun; Brannick, James

    2017-11-01

    In this talk I will introduce the systematic energetic variational approach for dissipative systems applied to multi-component fluid flows. These variational approaches are motivated by the seminal works of Rayleigh and Onsager. The advantage of this approach is that we have to postulate only energy law and some kinematic relations based on fundamental physical principles. The method gives a clear, quick and consistent way to derive the PDE system. I will compare different approaches to three-component flows using diffusive interface method and discuss their advantages and disadvantages. The diffusive interface method is an approach for modeling interactions among complex substances. The main idea behind this method is to introduce phase field labeling functions in order to model the contact line by smooth change from one type of material to another. The work of Arkadz Kirshtein and Chun Liu is partially supported by NSF Grants DMS-141200 and DMS-1216938.

  2. Analysis for a two-dissimilar-component cold standby repairable system with repair priority

    International Nuclear Information System (INIS)

    Leung, Kit Nam Francis; Zhang Yuanlin; Lai, Kin Keung

    2011-01-01

    In this paper, a cold standby repairable system consisting of two dissimilar components and one repairman is studied. Assume that working time distributions and repair time distributions of the two components are both exponential, and Component 1 has repair priority when both components are broken down. After repair, Component 1 follows a geometric process repair while Component 2 obeys a perfect repair. Under these assumptions, using the perfect repair model, the geometric process repair model and the supplementary variable technique, we not only study some important reliability indices, but also consider a replacement policy T, under which the system is replaced when the working age of Component 1 reaches T. Our problem is to determine an optimal policy T* such that the long-run average loss per unit time (i.e. average loss rate) of the system is minimized. The explicit expression for the average loss rate of the system is derived, and the corresponding optimal replacement policy T* can be found numerically. Finally, a numerical example for replacement policy T is given to illustrate some theoretical results and the model's applicability. - Highlights: → A two-dissimilar-component cold standby system with repair priority is formulated. → The successive up/repair times of Component 1 form a decreasing/increasing geometric process. → Not only some reliability indices but also a replacement policy are studied.

  3. Packaging of structural health monitoring components

    Science.gov (United States)

    Kessler, Seth S.; Spearing, S. Mark; Shi, Yong; Dunn, Christopher T.

    2004-07-01

    Structural Health Monitoring (SHM) technologies have the potential to realize economic benefits in a broad range of commercial and defense markets. Previous research conducted by Metis Design and MIT has demonstrated the ability of Lamb waves methods to provide reliable information regarding the presence, location and type of damage in composite specimens. The present NSF funded program was aimed to study manufacturing, packaging and interface concepts for critical SHM components. The intention is to be able to cheaply manufacture robust actuating/sensing devices, and isolate them from harsh operating environments including natural, mechanical, or electrical extremes. Currently the issues related to SHM system durability have remained undressed. During the course of this research several sets of test devices were fabricated and packaged to protect the piezoelectric component assemblies for robust operation. These assemblies were then tested in hot and wet conditions, as well as in electrically noisy environments. Future work will aim to package the other supporting components such as the battery and wireless chip, as well as integrating all of these components together for operation. SHM technology will enable the reduction or complete elimination of scheduled inspections, and will allow condition-based maintenance for increased reliability and reduced overall life-cycle costs.

  4. Circuit bridging of components by smoke

    International Nuclear Information System (INIS)

    Tanaka, T.J.; Nowlen, S.P.; Anderson, D.J.

    1996-10-01

    Smoke can adversely affect digital electronics; in the short term, it can lead to circuit bridging and in the long term to corrosion of metal parts. This report is a summary of the work to date and component-level tests by Sandia National Laboratories for the Nuclear Regulatory Commission to determine the impact of smoke on digital instrumentation and control equipment. The component tests focused on short-term effects such as circuit bridging in typical components and the factors that can influence how much the smoke will affect them. These factors include the component technology and packaging, physical board protection, and environmental conditions such as the amount of smoke, temperature of burn, and humidity level. The likelihood of circuit bridging was tested by measuring leakage currents and converting those currents to resistance in ohms. Hermetically sealed ceramic packages were more resistant to smoke than plastic packages. Coating the boards with an acrylic spray provided some protection against circuit bridging. The smoke generation factors that affect the resistance the most are humidity, fuel level, and burn temperature. The use of CO 2 as a fire suppressant, the presence of galvanic metal, and the presence of PVC did not significantly affect the outcome of these results

  5. Effect of interaction between dynapenic component of the European working group on sarcopenia in older people sarcopenia criteria and obesity on activities of daily living in the elderly.

    Science.gov (United States)

    Kim, Yeon-Pyo; Kim, Sun; Joh, Ju-Youn; Hwang, Hwan-Sik

    2014-05-01

    To examine the effects of interaction between dynapenic component of the European Working Group on Sarcopenia in Older People (EWGSOP) sarcopenia and obesity (dynapenia × obesity) on activities of daily living (ADL) in older participants. Cross-sectional analysis of the Validity and Reliability of Korean Frailty Index and the Validity and Reliability of the Kaigo-Yobo Checklist in Korean Elderly studies. Six welfare facilities operated by government in South Korea. Four hundred eighty-seven community-dwelling individuals (157 males, 330 females) >65 years of age. Dynapenic component of the EWGSOP sarcopenia was defined as usual gait speed sarcopenia and obesity in the elderly is associated with multiplicative interactions rather than additive interactions in ADL. Copyright © 2014 American Medical Directors Association, Inc. Published by Elsevier Inc. All rights reserved.

  6. Safety prediction for basic components of safety critical software based on static testing

    International Nuclear Information System (INIS)

    Son, H.S.; Seong, P.H.

    2001-01-01

    The purpose of this work is to develop a safety prediction method, with which we can predict the risk of software components based on static testing results at the early development stage. The predictive model combines the major factor with the quality factor for the components, both of which are calculated based on the measures proposed in this work. The application to a safety-critical software system demonstrates the feasibility of the safety prediction method. (authors)

  7. Key components of financial-analysis education for clinical nurses.

    Science.gov (United States)

    Lim, Ji Young; Noh, Wonjung

    2015-09-01

    In this study, we identified key components of financial-analysis education for clinical nurses. We used a literature review, focus group discussions, and a content validity index survey to develop key components of financial-analysis education. First, a wide range of references were reviewed, and 55 financial-analysis education components were gathered. Second, two focus group discussions were performed; the participants were 11 nurses who had worked for more than 3 years in a hospital, and nine components were agreed upon. Third, 12 professionals, including professors, nurse executive, nurse managers, and an accountant, participated in the content validity index. Finally, six key components of financial-analysis education were selected. These key components were as follows: understanding the need for financial analysis, introduction to financial analysis, reading and implementing balance sheets, reading and implementing income statements, understanding the concepts of financial ratios, and interpretation and practice of financial ratio analysis. The results of this study will be used to develop an education program to increase financial-management competency among clinical nurses. © 2015 Wiley Publishing Asia Pty Ltd.

  8. A configurable component-based software system for magnetic field measurements

    Energy Technology Data Exchange (ETDEWEB)

    Nogiec, J.M.; DiMarco, J.; Kotelnikov, S.; Trombly-Freytag, K.; Walbridge, D.; Tartaglia, M.; /Fermilab

    2005-09-01

    A new software system to test accelerator magnets has been developed at Fermilab. The magnetic measurement technique involved employs a single stretched wire to measure alignment parameters and magnetic field strength. The software for the system is built on top of a flexible component-based framework, which allows for easy reconfiguration and runtime modification. Various user interface, data acquisition, analysis, and data persistence components can be configured to form different measurement systems that are tailored to specific requirements (e.g., involving magnet type or test stand). The system can also be configured with various measurement sequences or tests, each of them controlled by a dedicated script. It is capable of working interactively as well as executing a preselected sequence of tests. Each test can be parameterized to fit the specific magnet type or test stand requirements. The system has been designed with portability in mind and is capable of working on various platforms, such as Linux, Solaris, and Windows. It can be configured to use a local data acquisition subsystem or a remote data acquisition computer, such as a VME processor running VxWorks. All hardware-oriented components have been developed with a simulation option that allows for running and testing measurements in the absence of data acquisition hardware.

  9. Principal component regression for crop yield estimation

    CERN Document Server

    Suryanarayana, T M V

    2016-01-01

    This book highlights the estimation of crop yield in Central Gujarat, especially with regard to the development of Multiple Regression Models and Principal Component Regression (PCR) models using climatological parameters as independent variables and crop yield as a dependent variable. It subsequently compares the multiple linear regression (MLR) and PCR results, and discusses the significance of PCR for crop yield estimation. In this context, the book also covers Principal Component Analysis (PCA), a statistical procedure used to reduce a number of correlated variables into a smaller number of uncorrelated variables called principal components (PC). This book will be helpful to the students and researchers, starting their works on climate and agriculture, mainly focussing on estimation models. The flow of chapters takes the readers in a smooth path, in understanding climate and weather and impact of climate change, and gradually proceeds towards downscaling techniques and then finally towards development of ...

  10. Cylinder components properties, applications, materials

    CERN Document Server

    2016-01-01

    Owing to the ever-increasing requirements to be met by gasoline and diesel engines in terms of CO2 reduction, emission behavior, weight, and service life, a comprehensive understanding of combustion engine components is essential today. It is no longer possible for professionals in automotive engineering to manage without the corresponding expertise, whether they work in the field of design, development, testing, or maintenance. This technical book provides in-depth answers to questions about design, production, and machining of cylinder components. In this second edition, every section has been revised and expanded to include the latest developments in the combustion engine. Content Piston rings Piston pins and piston pin circlips Bearings Connecting rods Crankcase and cylinder liners Target audience Engineers in the field of engine development and maintenanceLecturers and students in the areas of mechanical engineering, engine technology, and vehicle constructionAnyone interested in technology Publisher MAH...

  11. Parallel PDE-Based Simulations Using the Common Component Architecture

    International Nuclear Information System (INIS)

    McInnes, Lois C.; Allan, Benjamin A.; Armstrong, Robert; Benson, Steven J.; Bernholdt, David E.; Dahlgren, Tamara L.; Diachin, Lori; Krishnan, Manoj Kumar; Kohl, James A.; Larson, J. Walter; Lefantzi, Sophia; Nieplocha, Jarek; Norris, Boyana; Parker, Steven G.; Ray, Jaideep; Zhou, Shujia

    2006-01-01

    The complexity of parallel PDE-based simulations continues to increase as multimodel, multiphysics, and multi-institutional projects become widespread. A goal of component based software engineering in such large-scale simulations is to help manage this complexity by enabling better interoperability among various codes that have been independently developed by different groups. The Common Component Architecture (CCA) Forum is defining a component architecture specification to address the challenges of high-performance scientific computing. In addition, several execution frameworks, supporting infrastructure, and general purpose components are being developed. Furthermore, this group is collaborating with others in the high-performance computing community to design suites of domain-specific component interface specifications and underlying implementations. This chapter discusses recent work on leveraging these CCA efforts in parallel PDE-based simulations involving accelerator design, climate modeling, combustion, and accidental fires and explosions. We explain how component technology helps to address the different challenges posed by each of these applications, and we highlight how component interfaces built on existing parallel toolkits facilitate the reuse of software for parallel mesh manipulation, discretization, linear algebra, integration, optimization, and parallel data redistribution. We also present performance data to demonstrate the suitability of this approach, and we discuss strategies for applying component technologies to both new and existing applications

  12. Mechanical design philosophy for the graphite components of the core structure of an HTGR

    International Nuclear Information System (INIS)

    Bodmann, E.

    1987-01-01

    Parallel to the layout and design of the graphite components for THTRs and the succeeding high temperature reactor projects, the design methods for graphite components have been improved over the years. The aim of this works is to develop the design methods which take into account both the particular properties of graphite and the particular functions of the components. Because of the close relation ship between materials and design codes, this development work has progressed with the development, testing and qualification of German reactor graphite. In this paper, the experience in this field of Hochtemperatur Reaktorbau GmbH and the results of the work and approach to the design problems are reported. The example of a HTR 500 design for a 550 MWe power station is taken up, and the core structure is explained. The graphite components are divided into three classes according to the stress limits. The loading of these components is reviewed. The aim of the design is not the complete avoidance of failure, but to avoid the failure of a single component from leading to a disadvantageous consequence which is not allowable. The classification of loading events, Weibull statistics and maximum allowable stress, the formation of the permissible stress, the assessment of stress due to multiaxial loading and so on are described. (Kako, I.)

  13. Learning Local Components to Understand Large Bayesian Networks

    DEFF Research Database (Denmark)

    Zeng, Yifeng; Xiang, Yanping; Cordero, Jorge

    2009-01-01

    (domain experts) to extract accurate information from a large Bayesian network due to dimensional difficulty. We define a formulation of local components and propose a clustering algorithm to learn such local components given complete data. The algorithm groups together most inter-relevant attributes......Bayesian networks are known for providing an intuitive and compact representation of probabilistic information and allowing the creation of models over a large and complex domain. Bayesian learning and reasoning are nontrivial for a large Bayesian network. In parallel, it is a tough job for users...... in a domain. We evaluate its performance on three benchmark Bayesian networks and provide results in support. We further show that the learned components may represent local knowledge more precisely in comparison to the full Bayesian networks when working with a small amount of data....

  14. Machine learning of frustrated classical spin models. I. Principal component analysis

    Science.gov (United States)

    Wang, Ce; Zhai, Hui

    2017-10-01

    This work aims at determining whether artificial intelligence can recognize a phase transition without prior human knowledge. If this were successful, it could be applied to, for instance, analyzing data from the quantum simulation of unsolved physical models. Toward this goal, we first need to apply the machine learning algorithm to well-understood models and see whether the outputs are consistent with our prior knowledge, which serves as the benchmark for this approach. In this work, we feed the computer data generated by the classical Monte Carlo simulation for the X Y model in frustrated triangular and union jack lattices, which has two order parameters and exhibits two phase transitions. We show that the outputs of the principal component analysis agree very well with our understanding of different orders in different phases, and the temperature dependences of the major components detect the nature and the locations of the phase transitions. Our work offers promise for using machine learning techniques to study sophisticated statistical models, and our results can be further improved by using principal component analysis with kernel tricks and the neural network method.

  15. Combining two major ATLAS inner detector components

    CERN Multimedia

    Maximilien Brice

    2006-01-01

    The semiconductor tracker is inserted into the transition radiation tracker for the ATLAS experiment at the LHC. These make up two of the three major components of the inner detector. They will work together to measure the trajectories produced in the proton-proton collisions at the centre of the detector when the LHC is switched on in 2008.

  16. Modeling accelerator structures and RF components

    International Nuclear Information System (INIS)

    Ko, K., Ng, C.K.; Herrmannsfeldt, W.B.

    1993-03-01

    Computer modeling has become an integral part of the design and analysis of accelerator structures RF components. Sophisticated 3D codes, powerful workstations and timely theory support all contributed to this development. We will describe our modeling experience with these resources and discuss their impact on ongoing work at SLAC. Specific examples from R ampersand D on a future linear collide and a proposed e + e - storage ring will be included

  17. Seed storage protein components are associated with curled ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-11-16

    Nov 16, 2009 ... analysis suggests that the two increased protein spots in mutants were ... The main objective of this work was to gain further understanding of the influence of curled cotyledon on the seed storage protein components in soybean by com- .... cotyledon formation during Arabidopsis embryogenesis: interaction.

  18. Hybrid time/frequency domain modeling of nonlinear components

    DEFF Research Database (Denmark)

    Wiechowski, Wojciech Tomasz; Lykkegaard, Jan; Bak, Claus Leth

    2007-01-01

    This paper presents a novel, three-phase hybrid time/frequency methodology for modelling of nonlinear components. The algorithm has been implemented in the DIgSILENT PowerFactory software using the DIgSILENT Programming Language (DPL), as a part of the work described in [1]. Modified HVDC benchmark...

  19. OECD/NEA component operational experience, degradation and ageing project

    International Nuclear Information System (INIS)

    Gott, K.; Nevander, O.; Riznic, J.; Lydell, B.

    2015-01-01

    Several OECD Member Countries have agreed to establish the OECD/NEA 'Component Operational Experience, Degradation and Ageing Programme' (CODAP) to encourage multilateral co-operation in the collection and analysis of data relating to degradation and failure of metallic piping and non-piping metallic passive components in commercial nuclear power plants. The scope of the data collection includes service-induced wall thinning, part through-wall cracks, through-wall cracks with and without active leakage, and instances of significant degradation of metallic passive components, including piping pressure boundary integrity. CODAP is the continuation of the 2002-2011 'OECD/NEA Pipe Failure Data Exchange Project' (OPDE) and the Stress Corrosion Cracking Working Group of the 2006-2010 - OECD/NEA SCC and Cable Ageing project - (SCAP). OPDE was formally launched in May 2002. Upon completion of the 3. Term (May 2011), the OPDE project was officially closed to be succeeded by CODAP. In May 2011, 13 countries signed the CODAP first Term agreement. The first Term (2011-2014) work plan includes the development of a web-based relational event database on passive, metallic components in commercial nuclear power plants, a web-based knowledge base on material degradation, codes and standards relating to structural integrity and national practices for managing material degradation. The work plan also addresses the preparation of Topical Reports to foster technical cooperation and to deepen the understanding of national differences in ageing management. These Topical Reports are in the public domain and available for download on the NEA web site. Published in 2014, a first Topical Report addressed flow accelerated corrosion (FAC) of carbon steel and low alloy steel piping. A second Topical Report addresses operating experience with electro-hydraulic control (EHC) and instrument air (IA) system piping

  20. Unpacking the Learning-Work Nexus: "Priming" as Lever for High-Quality Learning Outcomes in Work-Integrated Learning Curricula

    Science.gov (United States)

    Smith, Calvin; Worsfold, Kate

    2015-01-01

    This paper describes the impacts of work-integrated learning (WIL) curriculum components on general employability skills--professional work-readiness, self-efficacy and team skills. Regression analyses emphasise the importance of the "authenticity" of WIL placements for the development of these generic outcomes. Other curricula factors…

  1. Precision moulding of polymer micro components

    DEFF Research Database (Denmark)

    Tosello, Guido

    2008-01-01

    The present research work contains a study concerning polymer micro components manufacturing by means of the micro injection moulding (µIM) process. The overall process chain was considered and investigated during the project, including part design and simulation, tooling, process analysis, part...... optimization, quality control, multi-material solutions. A series of experimental investigations were carried out on the influence of the main µIM process factors on the polymer melt flow within micro cavities. These investigations were conducted on a conventional injection moulding machine adapted...... to the production of micro polymer components, as well as on a micro injection moulding machine. A new approach based on coordinate optical measurement of flow markers was developed during the project for the characterization of the melt flow. In-line pressure measurements were also performed to characterize...

  2. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  3. Working on the Work: An Action Plan for Teachers, Principals, and Superintendents. The Jossey-Bass Education Series.

    Science.gov (United States)

    Schlechty, Phillip C.

    This book, which is a companion to the books, "Shaking up the Schoolhouse" and "Inventing Better Schools," presents the Working on the Work (WOW) framework for improving student performance by improving the quality of schoolwork. Field-tested in schools nationwide, the framework describes the 12 essential components of a WOW…

  4. Volatility Components, Affine Restrictions and Non-Normal Innovations

    DEFF Research Database (Denmark)

    Christoffersen, Peter; Jacobs, Kris; Dorian, Christian

    Recent work by Engle and Lee (1999) shows that allowing for long-run and short-run components greatly enhances a GARCH model's ability fit daily equity return dynamics. Using the risk-neutralization in Duan (1995), we assess the option valuation performance of the Engle-Lee model and compare...... models to four conditionally non-normal versions. As in Hsieh and Ritchken (2005), we find that non-affine models dominate affine models both in terms of fitting return and in terms of option valuation. For the affine models we find strong evidence in favor of the component structure for both returns...

  5. Segmented Aperture Interferometric Nulling Testbed (SAINT) II: component systems update

    Science.gov (United States)

    Hicks, Brian A.; Bolcar, Matthew R.; Helmbrecht, Michael A.; Petrone, Peter; Burke, Elliot; Corsetti, James; Dillon, Thomas; Lea, Andrew; Pellicori, Samuel; Sheets, Teresa; Shiri, Ron; Agolli, Jack; DeVries, John; Eberhardt, Andrew; McCabe, Tyler

    2017-09-01

    This work presents updates to the coronagraph and telescope components of the Segmented Aperture Interferometric Nulling Testbed (SAINT). The project pairs an actively-controlled macro-scale segmented mirror with the Visible Nulling Coronagraph (VNC) towards demonstrating capabilities for the future space observatories needed to directly detect and characterize a significant sample of Earth-sized worlds around nearby stars in the quest for identifying those which may be habitable and possibly harbor life. Efforts to improve the VNC wavefront control optics and mechanisms towards repeating narrowband results are described. A narrative is provided for the design of new optical components aimed at enabling broadband performance. Initial work with the hardware and software interface for controlling the segmented telescope mirror is also presented.

  6. Observations of component and specimen behaviour in fatigue

    Energy Technology Data Exchange (ETDEWEB)

    Rahka, K. [VTT-Industrial Systems, Espoo (Finland)

    2004-05-01

    Trends in structural integrity analysis for design show increased use of e.g. numerical FEM-analysis. FEM analysis produces pointwise strain or stress throughout a component. The distribution through the thickness is nonlinear and the meaning of these numbers compared to traditional stress by formulae call for new, realistic and reliable interpretation. This paper presents a set of observations of component behaviour in fatigue when data is plotted as local strain fluctuation versus cycles to failure. Part of the paper shows the differences in raw data between standard uniaxial test data and component data, when both data are represented by the uniaxial equivalent value for the local maximum peak strain range or amplitude using octahedral shear strain equivalence theory (vMises) for simplicity. The rest of the paper presents rules developed for bringing component data to coincide with standard uniaxial test data - thus providing a way to predict component behaviour based on material uniaxial data - and a new rule to estimate local yielding (plasticity correction) for structural analyses based on elasticity. The development work was done in a European Commission soponsored project 'Fatigue Design' (BE97- 4658), which was practically completed in 2002. (orig.)

  7. Language interoperability for high-performance parallel scientific components

    International Nuclear Information System (INIS)

    Elliot, N; Kohn, S; Smolinski, B

    1999-01-01

    With the increasing complexity and interdisciplinary nature of scientific applications, code reuse is becoming increasingly important in scientific computing. One method for facilitating code reuse is the use of components technologies, which have been used widely in industry. However, components have only recently worked their way into scientific computing. Language interoperability is an important underlying technology for these component architectures. In this paper, we present an approach to language interoperability for a high-performance parallel, component architecture being developed by the Common Component Architecture (CCA) group. Our approach is based on Interface Definition Language (IDL) techniques. We have developed a Scientific Interface Definition Language (SIDL), as well as bindings to C and Fortran. We have also developed a SIDL compiler and run-time library support for reference counting, reflection, object management, and exception handling (Babel). Results from using Babel to call a standard numerical solver library (written in C) from C and Fortran show that the cost of using Babel is minimal, where as the savings in development time and the benefits of object-oriented development support for C and Fortran far outweigh the costs

  8. Working Conditions, Lifestyles and Health

    DEFF Research Database (Denmark)

    Cottini, Elena; Ghinetti, Paolo

    The aim of this paper is to investigate whether employee health is affected by the environment in which the individual works - in terms of both physical and psychosocial working conditions - and by his or her lifestyle. Health measures are computed from Danish data, and refer to both self assessed...... general health and two more objective health measures: mental health specific to work-related problems, and physical health. We find that both bad working conditions and bad lifestyles reduce health, especially in its self-assessed component. The impact of lifetsyle indicators have a more modest health...... impact on both physical and mental health....

  9. A two-component dark matter model with real singlet scalars ...

    Indian Academy of Sciences (India)

    Theoretical framework. In the present work, the dark matter candidate has two components S and S′ both of ... The scalar sector potential (for Higgs and two real singlet scalars) in this framework can then be written .... In this work we obtain the allowed values of model parameters (δ2, δ′2, MS and M′S) using three direct ...

  10. The main objectives of lifetime management of reactor unit components

    International Nuclear Information System (INIS)

    Dragunov, Y.; Kurakov, Y.

    1998-01-01

    The main objectives of the work concerned with life management of reactor components in Russian Federation are as follows: development of regulations in the field of NPP components ageing and lifetime management; investigations of ageing processes; residual life evaluation taking into account the actual state of NPP systems, real loading conditions and number of load cycles, results of in-service inspections; development and implementation of measures for maintaining/enhancing the NPP safety

  11. Independent component analysis of edge information for face recognition

    CERN Document Server

    Karande, Kailash Jagannath

    2013-01-01

    The book presents research work on face recognition using edge information as features for face recognition with ICA algorithms. The independent components are extracted from edge information. These independent components are used with classifiers to match the facial images for recognition purpose. In their study, authors have explored Canny and LOG edge detectors as standard edge detection methods. Oriented Laplacian of Gaussian (OLOG) method is explored to extract the edge information with different orientations of Laplacian pyramid. Multiscale wavelet model for edge detection is also propos

  12. Parallel ICA identifies sub-components of resting state networks that covary with behavioral indices.

    Science.gov (United States)

    Meier, Timothy B; Wildenberg, Joseph C; Liu, Jingyu; Chen, Jiayu; Calhoun, Vince D; Biswal, Bharat B; Meyerand, Mary E; Birn, Rasmus M; Prabhakaran, Vivek

    2012-01-01

    Parallel Independent Component Analysis (para-ICA) is a multivariate method that can identify complex relationships between different data modalities by simultaneously performing Independent Component Analysis on each data set while finding mutual information between the two data sets. We use para-ICA to test the hypothesis that spatial sub-components of common resting state networks (RSNs) covary with specific behavioral measures. Resting state scans and a battery of behavioral indices were collected from 24 younger adults. Group ICA was performed and common RSNs were identified by spatial correlation to publically available templates. Nine RSNs were identified and para-ICA was run on each network with a matrix of behavioral measures serving as the second data type. Five networks had spatial sub-components that significantly correlated with behavioral components. These included a sub-component of the temporo-parietal attention network that differentially covaried with different trial-types of a sustained attention task, sub-components of default mode networks that covaried with attention and working memory tasks, and a sub-component of the bilateral frontal network that split the left inferior frontal gyrus into three clusters according to its cytoarchitecture that differentially covaried with working memory performance. Additionally, we demonstrate the validity of para-ICA in cases with unbalanced dimensions using simulated data.

  13. A Sink-driven Approach to Detecting Exposed Component Vulnerabilities in Android Apps

    OpenAIRE

    Wu, Daoyuan; Luo, Xiapu; Chang, Rocky K. C.

    2014-01-01

    Android apps could expose their components for cooperating with other apps. This convenience, however, makes apps susceptible to the exposed component vulnerability (ECV), in which a dangerous API (commonly known as sink) inside its component can be triggered by other (malicious) apps. In the prior works, detecting these ECVs use a set of sinks pertaining to the ECVs under detection. In this paper, we argue that a more comprehensive and effective approach should start by a systematic selectio...

  14. Design and Application of an Ontology for Component-Based Modeling of Water Systems

    Science.gov (United States)

    Elag, M.; Goodall, J. L.

    2012-12-01

    Many Earth system modeling frameworks have adopted an approach of componentizing models so that a large model can be assembled by linking a set of smaller model components. These model components can then be more easily reused, extended, and maintained by a large group of model developers and end users. While there has been a notable increase in component-based model frameworks in the Earth sciences in recent years, there has been less work on creating framework-agnostic metadata and ontologies for model components. Well defined model component metadata is needed, however, to facilitate sharing, reuse, and interoperability both within and across Earth system modeling frameworks. To address this need, we have designed an ontology for the water resources community named the Water Resources Component (WRC) ontology in order to advance the application of component-based modeling frameworks across water related disciplines. Here we present the design of the WRC ontology and demonstrate its application for integration of model components used in watershed management. First we show how the watershed modeling system Soil and Water Assessment Tool (SWAT) can be decomposed into a set of hydrological and ecological components that adopt the Open Modeling Interface (OpenMI) standard. Then we show how the components can be used to estimate nitrogen losses from land to surface water for the Baltimore Ecosystem study area. Results of this work are (i) a demonstration of how the WRC ontology advances the conceptual integration between components of water related disciplines by handling the semantic and syntactic heterogeneity present when describing components from different disciplines and (ii) an investigation of a methodology by which large models can be decomposed into a set of model components that can be well described by populating metadata according to the WRC ontology.

  15. TNO experience on sodium cleaning of large plant components by vacuum distillation

    Energy Technology Data Exchange (ETDEWEB)

    Smit, C Ch [MT-TNO Dept. 50-MW Sodium Component Test Facility, Hengelo (Netherlands)

    1978-08-01

    The Intermediate Heat Exchanger and Steam generators developed within the framework of the SNR-programme are being tested in the 50 MW Test facility at Hengelo - The Netherlands. The facility was designed and built by Neratoom, and is operated by TNO, the Dutch Organisation for Applied Scientific Research. Sodium technology work, such as reported in this paper, is done in close cooperation with Neratoom and with TNO-laboratories at Apeldoorn, where several smaller sodium rigs and other facilities are available. The operation and maintenance of a large sodium test facility and sodium rigs lead to frequent cleaning of small plant components, test sections and sampling devices. The choice of method usually depends on the size of the component and the cleaning quality needed. The results are predictable and satisfactory. For large components, however, the situation is different. Although the basic cleaning methods using alcohol and moist gas are well-known, and procedures for the cleaning of small components are available, complete cleaning of tight crevices and threaded bolds cannot be guaranteed, and consequently the requalification procedure needs to include a complete disassembly and inspection of the cleaned component. For large components this policy cannot always be followed. In those cases for instance where an in-between internal inspection is required, or where only small modifications of the test object are necessary, other possibilities have to be considered. For this reason some work has been done to develop reliable vacuum distillation procedures for large components, based on the cleaning experience with small plant components. The results of these procedures applied to large plant components are reported in this paper.

  16. TNO experience on sodium cleaning of large plant components by vacuum distillation

    International Nuclear Information System (INIS)

    Smit, C.Ch.

    1978-01-01

    The Intermediate Heat Exchanger and Steam generators developed within the framework of the SNR-programme are being tested in the 50 MW Test facility at Hengelo - The Netherlands. The facility was designed and built by Neratoom, and is operated by TNO, the Dutch Organisation for Applied Scientific Research. Sodium technology work, such as reported in this paper, is done in close cooperation with Neratoom and with TNO-laboratories at Apeldoorn, where several smaller sodium rigs and other facilities are available. The operation and maintenance of a large sodium test facility and sodium rigs lead to frequent cleaning of small plant components, test sections and sampling devices. The choice of method usually depends on the size of the component and the cleaning quality needed. The results are predictable and satisfactory. For large components, however, the situation is different. Although the basic cleaning methods using alcohol and moist gas are well-known, and procedures for the cleaning of small components are available, complete cleaning of tight crevices and threaded bolds cannot be guaranteed, and consequently the requalification procedure needs to include a complete disassembly and inspection of the cleaned component. For large components this policy cannot always be followed. In those cases for instance where an in-between internal inspection is required, or where only small modifications of the test object are necessary, other possibilities have to be considered. For this reason some work has been done to develop reliable vacuum distillation procedures for large components, based on the cleaning experience with small plant components. The results of these procedures applied to large plant components are reported in this paper

  17. Working Memory and Parent-Rated Components of Attention in Middle Childhood: A Behavioral Genetic Study

    Science.gov (United States)

    Deater-Deckard, Kirby; Cutting, Laurie; Thompson, Lee A.; Petrill, Stephen A.

    2012-01-01

    The purpose of the current study was to investigate potential genetic and environmental correlations between working memory and three behavioral aspects of the attention network (i.e., executive, alerting, and orienting) using a twin design. Data were from 90 monozygotic (39% male) and 112 same-sex dizygotic (41% male) twins. Individual differences in working memory performance (digit span) and parent-rated measures of executive, alerting, and orienting attention included modest to moderate genetic variance, modest shared environmental variance, and modest to moderate nonshared environmental variance. As hypothesized, working memory performance was correlated with executive and alerting attention, but not orienting attention. The correlation between working memory, executive attention, and alerting attention was completely accounted for by overlapping genetic covariance, suggesting a common genetic mechanism or mechanisms underlying the links between working memory and certain parent-rated indicators of attentive behavior. PMID:21948215

  18. Selection of independent components based on cortical mapping of electromagnetic activity

    Science.gov (United States)

    Chan, Hui-Ling; Chen, Yong-Sheng; Chen, Li-Fen

    2012-10-01

    Independent component analysis (ICA) has been widely used to attenuate interference caused by noise components from the electromagnetic recordings of brain activity. However, the scalp topographies and associated temporal waveforms provided by ICA may be insufficient to distinguish functional components from artifactual ones. In this work, we proposed two component selection methods, both of which first estimate the cortical distribution of the brain activity for each component, and then determine the functional components based on the parcellation of brain activity mapped onto the cortical surface. Among all independent components, the first method can identify the dominant components, which have strong activity in the selected dominant brain regions, whereas the second method can identify those inter-regional associating components, which have similar component spectra between a pair of regions. For a targeted region, its component spectrum enumerates the amplitudes of its parceled brain activity across all components. The selected functional components can be remixed to reconstruct the focused electromagnetic signals for further analysis, such as source estimation. Moreover, the inter-regional associating components can be used to estimate the functional brain network. The accuracy of the cortical activation estimation was evaluated on the data from simulation studies, whereas the usefulness and feasibility of the component selection methods were demonstrated on the magnetoencephalography data recorded from a gender discrimination study.

  19. Optimal maintenance of multi-component systems: a review

    NARCIS (Netherlands)

    R.P. Nicolai (Robin); R. Dekker (Rommert)

    2006-01-01

    textabstractIn this article we give an overview of the literature on multi-component maintenance optimization. We focus on work appearing since the 1991 survey "A survey of maintenance models for multi-unit systems" by Cho and Parlar. This paper builds forth on the review article by Dekker et al.

  20. Innovative approaches for addressing old challenges in component importance measures

    International Nuclear Information System (INIS)

    Rocco S, Claudio M.; Ramirez-Marquez, Jose Emmanuel

    2012-01-01

    Importance measures (IM) are component related indices that allow assessing how a component in a system affects one or more system level performance functions. While several IM have been presented in the literature, challenges still remain with respect to the following: (1) multiple ranking—multiple perspective, (2) multi-component importance and, (3) multi-function importance. To address these challenges, this paper proposes set of innovative solutions based on several available techniques: Hasse diagram, Copeland score and Multi-objective optimization. As such, the purpose of this research is twofold: first propose solutions and second foster new research to address these challenges. Each of the proposed solutions is exemplified with a working example.

  1. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  2. Influence of pharmacological manipulations of NMDA and cholinergic receptors on working versus reference memory in a dual component odor span task.

    Science.gov (United States)

    MacQueen, David A; Dalrymple, Savannah R; Drobes, David J; Diamond, David M

    2016-06-01

    Developed as a tool to assess working memory capacity in rodents, the odor span task (OST) has significant potential to advance drug discovery in animal models of psychiatric disorders. Prior investigations indicate OST performance is impaired by systemic administration of N-methyl-d-aspartate receptor (NMDA-r) antagonists and is sensitive to cholinergic manipulations. The present study sought to determine whether an impairment in OST performance can be produced by systemic administration of the competitive NMDA-r antagonist 3-(2-carboxypiperazin-4-yl)propyl-1-phosphonic acid (CPP; 3, 10, 17 mg/kg i.p.) in a unique dual-component variant of the OST, and whether this impairment is ameliorated by nicotine (0.75 mg/kg i.p.). Male Sprague-Dawley rats were trained to asymptotic level of performance on a 24-trial two-comparison incrementing nonmatching to sample OST. In addition, rats were administered a two-comparison olfactory reference memory (RM) task, which was integrated into the OST. The RM task provided an assessment of the effects of drug administration on global behavioral measures, long-term memory and motivation. Several measures of working memory (span, longest run, and accuracy) were dose dependently impaired by CPP without adversely affecting RM. Analysis of drug effects across trial blocks demonstrated a significant impairment of performance even at low memory loads, suggesting a CPP-induced deficit of olfactory short-term memory that is not load-dependent. Although nicotine did not ameliorate CPP-induced impairments in span or accuracy, it did block the impairment in longest run produced by the 10 mg/kg dose of CPP. Overall, our results indicate that performance in our 24 odor two-comparison OST is capacity dependent and that CPP impaired OST working, but not reference, memory. © 2016 MacQueen et al.; Published by Cold Spring Harbor Laboratory Press.

  3. A component analysis of positive behaviour support plans.

    Science.gov (United States)

    McClean, Brian; Grey, Ian

    2012-09-01

    Positive behaviour support (PBS) emphasises multi-component interventions by natural intervention agents to help people overcome challenging behaviours. This paper investigates which components are most effective and which factors might mediate effectiveness. Sixty-one staff working with individuals with intellectual disability and challenging behaviours completed longitudinal competency-based training in PBS. Each staff participant conducted a functional assessment and developed and implemented a PBS plan for one prioritised individual. A total of 1,272 interventions were available for analysis. Measures of challenging behaviour were taken at baseline, after 6 months, and at an average of 26 months follow-up. There was a significant reduction in the frequency, management difficulty, and episodic severity of challenging behaviour over the duration of the study. Escape was identified by staff as the most common function, accounting for 77% of challenging behaviours. The most commonly implemented components of intervention were setting event changes and quality-of-life-based interventions. Only treatment acceptability was found to be related to decreases in behavioural frequency. No single intervention component was found to have a greater association with reductions in challenging behaviour.

  4. Advanced Electrical Materials and Components Development: An Update

    Science.gov (United States)

    Schwarze, Gene E.

    2005-01-01

    The primary means to develop advanced electrical components is to develop new and improved materials for magnetic components (transformers, inductors, etc.), capacitors, and semiconductor switches and diodes. This paper will give an update of the Advanced Power Electronics and Components Technology being developed by the NASA Glenn Research Center for use in future Power Management and Distribution subsystems used in space power systems for spacecraft and lunar and planetary surface power. The initial description and status of this technology program was presented two years ago at the First International Energy Conversion Engineering Conference held at Portsmouth, Virginia, August 2003. The present paper will give a brief background of the previous work reported and a summary of research performed the past several years on soft magnetic materials characterization, dielectric materials and capacitor developments, high quality silicon carbide atomically smooth substrates, and SiC static and dynamic device characterization under elevated temperature conditions. The rationale for and the benefits of developing advanced electrical materials and components for the PMAD subsystem and also for the total power system will also be briefly discussed.

  5. Classified Component Disposal at the Nevada National Security Site (NNSS) - 13454

    Energy Technology Data Exchange (ETDEWEB)

    Poling, Jeanne; Arnold, Pat [National Security Technologies, LLC (NSTec), P.O. Box 98521, Las Vegas, NV 89193-8521 (United States); Saad, Max [Sandia National Laboratories, P.O. Box 5800, Albuquerque, NM 87185 (United States); DiSanza, Frank [E. Frank DiSanza Consulting, 2250 Alanhurst Drive, Henderson, NV 89052 (United States); Cabble, Kevin [U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office, P.O. Box 98518, Las Vegas, NV 89193-8518 (United States)

    2013-07-01

    The Nevada National Security Site (NNSS) has added the capability needed for the safe, secure disposal of non-nuclear classified components that have been declared excess to national security requirements. The NNSS has worked with U.S. Department of Energy, National Nuclear Security Administration senior leadership to gain formal approval for permanent burial of classified matter at the NNSS in the Area 5 Radioactive Waste Management Complex owned by the U.S. Department of Energy. Additionally, by working with state regulators, the NNSS added the capability to dispose non-radioactive hazardous and non-hazardous classified components. The NNSS successfully piloted the new disposal pathway with the receipt of classified materials from the Kansas City Plant in March 2012. (authors)

  6. Classified Component Disposal at the Nevada National Security Site (NNSS) - 13454

    International Nuclear Information System (INIS)

    Poling, Jeanne; Arnold, Pat; Saad, Max; DiSanza, Frank; Cabble, Kevin

    2013-01-01

    The Nevada National Security Site (NNSS) has added the capability needed for the safe, secure disposal of non-nuclear classified components that have been declared excess to national security requirements. The NNSS has worked with U.S. Department of Energy, National Nuclear Security Administration senior leadership to gain formal approval for permanent burial of classified matter at the NNSS in the Area 5 Radioactive Waste Management Complex owned by the U.S. Department of Energy. Additionally, by working with state regulators, the NNSS added the capability to dispose non-radioactive hazardous and non-hazardous classified components. The NNSS successfully piloted the new disposal pathway with the receipt of classified materials from the Kansas City Plant in March 2012. (authors)

  7. Three-dimensional tolerance investigation on main ITER components

    International Nuclear Information System (INIS)

    Reich, J.; Chiocchio, S.; Cordier, J.-J.; Gallix, R.; Guerin, O.; Halcrow, T.

    2009-01-01

    ITER has to focus on all processes that ensure the permanent consistency between the requirements of ITER and the performance attributes of its components. This includes integration tolerance studies. One of the main goals of this work is to establish a sufficient tolerance scheme for all main components. The investigation in sufficient tolerance studies at a very early stage of the project will result in cost savings during the installation process. Due to the complexity of the ITER components and their several interfaces to their surroundings, it is advantageous to perform tolerance studies with a specialised tool like 'three-dimensional control systems' (3DCS) that is compatible with the ITER CATIA-V5 CAD engineering system and Enovia PRC environment. On single components (e.g. Magnet TF Coils) detailed two-dimensional tolerance schemes have been developed from the beginning. Using them as a starting point, functional or key interface tolerances have to be defined. Furthermore the tolerance studies have to consider the different configurations of each component (e.g. manufacturing stages, assembly plan, integration with surrounding, operation conditions). Especially for assembly it is necessary to analyse the final ranges which have to be achieved during the installation process. From the integration point of view, the key tolerances of all main in-cryostat ITER components have to be brought together in a complete and consistent manner.

  8. Emotional Component in Teaching and Learning

    Science.gov (United States)

    Ponnambalam, Michael

    2018-02-01

    The laws of physics are often seen as objective truth, pure and simple. Hence, they tend to appear cerebral and cold. However, their presentation is necessarily subjective and may vary from being boring to being exciting. A detailed analysis of physics education reform efforts over the last three decades finds that interactive instruction results in greater learning gains than the traditional lecture format. In interactive engagement, the emotional component plays a far greater role than acknowledged by many. As an experienced physics teacher [(i) Four decades of teaching and research in four continents (teaching all courses to undergraduate physics majors and algebra-based physics to high school seniors as well as college freshmen), (ii) 11 years of volunteer work in Physics Popularization in six countries to many thousands of students in elementary, middle, and high schools as well as colleges and universities, and (iii) eight years as a Master Teacher and mentor], I feel that the emotional component in teaching and learning physics has been neglected. This paper presents the role of the emotional component in transforming ordinary teaching and learning of physics into an enjoyable and exciting experience for students as well as teachers.

  9. A further contribution to the knowledge of two inadequately known species of geophilid centipedes from the Andes of South-Central Chile, currently assigned to the genus Plateurytion Attems, 1909 (Chilopoda: Geophilomorpha).

    Science.gov (United States)

    Pereira, Luis Alberto

    2015-10-06

    Two poorly known species of geophilid centipedes from the Andes of South-Central Chile, i.e., Plateurytion mundus (Chamberlin, 1955) and Plateurytion zapallar (Chamberlin, 1955) (Myriapoda: Chilopoda: Geophilomorpha), are herein redescribed and illustrated after type specimens of both taxa and new material of the latter, rectifying the condition of the coxosternites of the second maxillae, which are medially joined through a narrow, hyaline and non-areolate membranous isthmus only (instead of "broadly fused as in Pachymerium", as stated by Chamberlin), this being consistent with the current generic assignment of these species under Plateurytion Attems, 1909. New data on many morphological features of specific value, until now unknown, are also given for both taxa. Plateurytion zapallar is reported for the first time from Coquimbo region, 11 Km N of Los Vilos (Elqui province), Valparaíso region, Quebrada Huaquén, Pichicuy (Petorca province), La Campana National Park (Quillota province), and Quebrada el Tigre, Cachagua (Valparíso province). A key for identification of the South American species currently included in Plateurytion is given.

  10. Assessment of Combustor Working Environments

    Directory of Open Access Journals (Sweden)

    Leiyong Jiang

    2012-01-01

    Full Text Available In order to assess the remaining life of gas turbine critical components, it is vital to accurately define the aerothermodynamic working environments and service histories. As a part of a major multidisciplinary collaboration program, a benchmark modeling on a practical gas turbine combustor is successfully carried out, and the two-phase, steady, turbulent, compressible, reacting flow fields at both cruise and takeoff are obtained. The results show the complicated flow features inside the combustor. The airflow over each flow element of the combustor can or liner is not evenly distributed, and considerable variations, ±25%, around the average values, are observed. It is more important to note that the temperatures at the combustor can and cooling wiggle strips vary significantly, which can significantly affect fatigue life of engine critical components. The present study suggests that to develop an adequate aerothermodynamics tool, it is necessary to carry out a further systematic study, including validation of numerical results, simulations at typical engine operating conditions, and development of simple correlations between engine operating conditions and component working environments. As an ultimate goal, the cost and time of gas turbine engine fleet management must be significantly reduced.

  11. Residual services and power increases for components

    International Nuclear Information System (INIS)

    Pauli, W.

    1991-01-01

    As part of the moratorium in Switzerland work in nuclear power stations has been concentrating more on increasing capacity, reducing radiation levels to which personnel is exposed and extending the service life of existing plants. This has meant the requalification, repair or replacement of components and systems some of which have been in operation for more than 20 years. In addition to the classic role of manufacturer, the industry which acts as both supplier and manufacturer of these components also has to be the expertise holder, documentation pool and analysts. The examples described in this article show that close cooperation with operators leads to solutions which fully ensure the safe and successful operation of the plants, even in the second section of their service life. 4 refs

  12. Unmasking the component-general and component-specific aspects of primary and secondary memory in the immediate free recall task.

    Science.gov (United States)

    Gibson, Bradley S; Gondoli, Dawn M

    2018-04-01

    The immediate free recall (IFR) task has been commonly used to estimate the capacities of the primary memory (PM) and secondary memory (SM) components of working memory (WM). Using this method, the correlation between estimates of the PM and SM components has hovered around zero, suggesting that PM and SM represent fully distinct and dissociable components of WM. However, this conclusion has conflicted with more recent studies that have observed moderately strong, positive correlations between PM and SM when separate attention and retrieval tasks are used to estimate these capacities, suggesting that PM and SM represent at least some related capacities. The present study attempted to resolve this empirical discrepancy by investigating the extent to which the relation between estimates of PM and SM might be suppressed by a third variable that operates during the recall portion of the IFR task. This third variable was termed "strength of recency" (SOR) in the present study as it reflected differences in the extent to which individuals used the same experimentally-induced recency recall initiation strategy. As predicted, the present findings showed that the positive correlation between estimates of PM and SM grew from small to medium when the indirect effect of SOR was controlled across two separate sets of studies. This finding is important because it provides stronger support for the distinction between "component-general" and "component-specific" aspects of PM and SM; furthermore, a proof is presented that demonstrates a limitation of using regression techniques to differentiate general and specific aspects of these components.

  13. A major protein component of the Bacillus subtilis biofilm matrix.

    Science.gov (United States)

    Branda, Steven S; Chu, Frances; Kearns, Daniel B; Losick, Richard; Kolter, Roberto

    2006-02-01

    Microbes construct structurally complex multicellular communities (biofilms) through production of an extracellular matrix. Here we present evidence from scanning electron microscopy showing that a wild strain of the Gram positive bacterium Bacillus subtilis builds such a matrix. Genetic, biochemical and cytological evidence indicates that the matrix is composed predominantly of a protein component, TasA, and an exopolysaccharide component. The absence of TasA or the exopolysaccharide resulted in a residual matrix, while the absence of both components led to complete failure to form complex multicellular communities. Extracellular complementation experiments revealed that a functional matrix can be assembled even when TasA and the exopolysaccharide are produced by different cells, reinforcing the view that the components contribute to matrix formation in an extracellular manner. Having defined the major components of the biofilm matrix and the control of their synthesis by the global regulator SinR, we present a working model for how B. subtilis switches between nomadic and sedentary lifestyles.

  14. Community-Based Rehabilitation in Bangladesh, Health Components Need to be Integrated with Primary Health Care

    Directory of Open Access Journals (Sweden)

    Md Shahidur Rahman

    2018-01-01

    Full Text Available Community-based rehabilitation (CBR is defined as a strategy within general community development for the rehabilitation, equalization of opportunities, poverty reduction and social inclusion of people with disabilities. The role of CBR is to work closely with the health sector to ensure that the needs of people with disabilities and their family members are addressed in the areas of health promotion, prevention, medical care, rehabilitation and assistive devices. CBR also needs to work with individuals and their families to facilitate their access to health services and to work with other sectors to ensure that all aspects of health are addressed. Health components of CBR as per WHO guidelines are grossly neglected in Bangladesh. Some government and non-government organizations are working independently, but health components are inadequately addressed. We observed that primary health care, if integrated with medical rehabilitation of disabled, will better address the need and help bring disabled into mainstream of development. Health care providers at grass root level need to be trained in CBR activities which can be arranged centrally with health ministry, social welfare ministry and rehabilitation specialists. In this review we have tried to reveal the health components of CBR in global and Bangladesh context and importance of integrating health components of CBR with primary health care.

  15. Procurement and quality control of components important to safety in nuclear engineering projects

    International Nuclear Information System (INIS)

    Zhang Zhihua; Zhang Yiyun

    2006-01-01

    The procurement and quality control of components is a very important work in the nuclear engineering. This paper introduces the project management techniques, such as how to make a plan of components purchase in nuclear engineering. This paper discussed the classification of components, evaluation of the potential suppliers, invitation of bids, exchange of design details with the suppliers, quality assurance and quality assurance audit, and the equipment checks before acceptance and some engineering experiences. (authors)

  16. Multi-spectrometer calibration transfer based on independent component analysis.

    Science.gov (United States)

    Liu, Yan; Xu, Hao; Xia, Zhenzhen; Gong, Zhiyong

    2018-02-26

    Calibration transfer is indispensable for practical applications of near infrared (NIR) spectroscopy due to the need for precise and consistent measurements across different spectrometers. In this work, a method for multi-spectrometer calibration transfer is described based on independent component analysis (ICA). A spectral matrix is first obtained by aligning the spectra measured on different spectrometers. Then, by using independent component analysis, the aligned spectral matrix is decomposed into the mixing matrix and the independent components of different spectrometers. These differing measurements between spectrometers can then be standardized by correcting the coefficients within the independent components. Two NIR datasets of corn and edible oil samples measured with three and four spectrometers, respectively, were used to test the reliability of this method. The results of both datasets reveal that spectra measurements across different spectrometers can be transferred simultaneously and that the partial least squares (PLS) models built with the measurements on one spectrometer can predict that the spectra can be transferred correctly on another.

  17. Maintenance service for major component of PWR plant. Replacement of pressurizer safe end weld

    International Nuclear Information System (INIS)

    Miyoshi, Yoshiyuki; Kobayashi, Yuki; Yamamoto, Kazuhide; Ueda, Takeshi; Suda, Naoki; Shintani, Takashi

    2017-01-01

    In October 2016, MHI completed the replacement of safe end weld of pressurizer (Pz) of Ringhals unit 3, which was the first maintenance work for main component of pressurized water reactor (PWR) plant in Europe. For higher reliability and longer lifetime of PWR plant, MHI has conducted many kinds of maintenance works of main components of PWR plants in Japan against stress corrosion cracking due to aging degradation. Technical process for replacement of Pz safe end weld were established by MHI. MHI has experienced the work for 21 PWR units in Japan. That of Ringhals unit 3 was planned and conducted based on the experiences. In this work, Alloy 600 used for welds of nozzles of Pz was replaced with Alloy 690. Alloy 690 is more corrosive-resistant than Alloy 600. Specially designed equipment and technical process were developed and established by MHI to replace safe end weld of Pz and applied for the Ringhals unit 3 as a first application in Europe. The application had been performed in success and achieved the planned replacement work duration and total radiation dose by using sophisticated machining and welding equipment designed to meet the requirements to be small, lightweight and remote-controlled and operating by well skilled MHI personnel experienced in maintenance activities for major components of PWR plant in Japan. The success shows that the experience, activities and technology developed in Japan for main components of PWR plant shall be applicable to contribute reliable operations of nuclear power plants in Europe and other countries. (author)

  18. 3D-printed optical active components

    Science.gov (United States)

    Suresh Nair, S.; Nuding, J.; Heinrich, A.

    2018-02-01

    Additive Manufacturing (AM) has the potential to become a powerful tool in the realization of complex optical components. The primary advantage that meets the eye, is that fabrication of geometrically complicated optical structures is made easier in AM as compared to the conventional fabrication methods (using molds for instance). But this is not the only degree of freedom that AM has to offer. With the multitude of materials suitable for AM in the market, it is possible to introduce functionality into the components one step before fabrication: by altering the raw material. A passive example would be to use materials with varying properties together, in a single manufacturing step, constructing samples with localized refractive indices for instance. An active approach is to blend in materials with distinct properties into the photopolymer resin and manufacturing with this composite material. Our research is currently focused in this direction, with the desired optical property to be introduced being Photoluminescence. Formation of nanocomposite mixtures to produce samples is the current approach. With this endeavor, new sensor systems can be realized, which may be used to measure the absorption spectra of biological samples. Thereby the sample compartment, the optics and the spectral light source (different quantum dots) are 3D-printed in one run. This component can be individually adapted to the biological sample with respect to wavelength, optical and mechanical properties. Here we would like to present our work on the additive manufacturing of an active optical component. Based on the stereolithography method, a monolithic optical component was 3D-printed, showing light emission at different defined wavelengths due to UV excited quantum dots inside the 3D-printed optics.

  19. Heavy steel casting components for power plants 'mega-components' made of high Cr-steels

    Energy Technology Data Exchange (ETDEWEB)

    Hanus, Reinhold [voestalpine Giesserei Linz GmbH, Linz (Austria)

    2010-07-01

    solutions to process related problems such as deoxidation, solidification behavior, heat treatment with long hold times, welding on the casting, stresses, etc. Cast components for power plants, made of high Cr-steels and Ni-base alloys are becoming bigger. Development work and investments in new processes and technologies are necessary, process-modelling is an indispensable tool for the ability to produce also these 'mega-components'. (orig.)

  20. Working Memory in Students with Mathematical Difficulties

    Science.gov (United States)

    Nur, I. R. D.; Herman, T.; Ningsih, S.

    2018-04-01

    Learning process is the activities that has important role because this process is one of the all factors that establish students success in learning. oftentimes we find so many students get the difficulties when they study mathematics. This condition is not only because of the outside factor but also it comes from the inside. The purpose of this research is to analyze and give the representation how students working memory happened in physical education students for basic statistics subjects which have mathematical difficulties. The subjects are 4 students which have a mathematical difficulties. The research method is case study and when the describe about students working memory are explanated deeply with naturalistic observation. Based on this research, it was founded that 4 students have a working memory deficit in three components. The components are phonological loop, visuospatial sketchpad, dan episodic buffer.

  1. Validation gets underway on Sizewell ''Incredibility of Failure'' components

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The Inspection Validation Centre (IVC) of AEA Reactor Services in the UK has begun an eighteen month programme to validate the procedures and personnel of OIS plc, the inspection agents chosen by Nuclear Electric to carry out the pre-service ultrasonic inspection of the Sizewell B Pressurized Water Reactor components assigned to the ''Incredibility of Failure'' (IoF) category. The work involves several Sizewell B primary circuit components - the steam generators, pressurizer, and primary pumps - and will consider the inspections to be applied to the circumferential and nozzle-to-shell welds, nozzle inner radii and the pump fly-wheel forging. The validation will provide independent confirmation that OIS personnel are capable of using manual and automated methods to find and size any flaws of structural concern in these components. (author)

  2. Prioritising Redundant Network Component for HOWBAN Survivability Using FMEA

    Directory of Open Access Journals (Sweden)

    Cheong Loong Chan

    2017-01-01

    Full Text Available Deploying redundant component is the ubiquitous approach to improve the reliability and survivability of a hybrid optical wireless broadband access network (HOWBAN. Much work has been done to study the cost and impact of deploying redundant component in the network but no formal tools have been used to enable the evaluation and decision to prioritise the deployment of redundant facilities in the network. In this paper we show how FMEA (Failure Mode Effect and Analysis technique can be adapted to identify the critical segment in the network and prioritise the redundant component to be deployed to ensure network survivability. Our result showed that priority must be given to redundancy to mitigate grid power outage particularly in less developed countries which is poised for rapid expansion in broadband services.

  3. Production Equipment and Processes for Bulk Formed Micro Components

    DEFF Research Database (Denmark)

    Paldan, Nikolas Aulin; Arentoft, Mogens; Eriksen, Rasmus Solmer

    2007-01-01

    Manufacturing techniques for production of small precise metallic parts has gained interest during recent years, an interest led by an industrial demand for components for integrated products like mobile phones, personal digital assistants (PDAs), mp3-players and in the future for spare parts...... has been developed and used to form a number of industrial micro parts in aluminium and silver, with ongoing work on forming of titanium. Manufacture of billets by cropping has been examined using a simple test rig and an automatic cropping device has been designed, manufactured and tested....... for the human body. Micro components have also found several applications within the medical, audiological and dental industry, applications that impose increased demands for biocompatible and corrosion-resistant materials and cleanness. So far these micro components have mainly been manufactured by traditional...

  4. The Public Schools as a Work Environment

    Science.gov (United States)

    McIntire, Walter G.; Drummond, Robert J.

    1975-01-01

    Examines the perceptions of elementary and secondary school teachers, and school board members, of the school as a work environment. The Work Environment Preferences Scale, an instrument based on Weber's components of bureaucratic organizations, was administered to all the teachers and board members of a small Maine school district. (Author)

  5. A Digital Archives Framework for the Preservation of Cultural Artifacts with Technological Components

    Directory of Open Access Journals (Sweden)

    Guillaume Boutard

    2013-06-01

    Full Text Available The preservation of artistic works with technological components, such as musical works, is recognised as an issue by both the artistic community and the archival community. Preserving such works involves tackling the difficulties associated with digital information in general, but also raises its own specific problems, such as constantly evolving digital instruments embodied within software and idiosyncratic human-computer interactions. Because of these issues, standards in place for archiving digital information are not always suitable for the preservation of these works. The impact on the organisation and the descriptions of such archives need to be conceptualised in order to provide these technological components with readability, authenticity and intelligibility. While previous projects emphasized readability and authenticity, less effort has been dedicated to addressing intelligibility issues.The research into the specification of significant properties and its extension, namely significant knowledge, offers some grounds for reflecting on this question. Furthermore, the relevance of taking into account the creative process involved in the production of technological components offers an opportunity to redefine the status of technological agents in the performative aspect of digital records. Altogether, the research on significant knowledge and creative processes provide us with a conceptual framework that we propose to bring together with digital archives models to form a coherent framework.

  6. Solubility of flue gas components in NaOH based scrubber solutions

    Energy Technology Data Exchange (ETDEWEB)

    Sandelin, K; Backman, R

    1997-11-01

    The work reported here is a thermodynamic study on the solubility of flue gas components in aqueous solutions containing sodium salts. The result of the work is an equilibrium model. The model presented here includes sodium hydroxide and sodium salts that makes it possible to study simultaneous absorption of flue gas components in alkaline scrubber solutions. The model is applied on the absorption of a flue gas into a NaOH scrubber solution. The calculations show that it is possible to simultaneously absorb sulfur dioxide, sulfuric acid, and ammonia without carbon dioxide co-absorption. The calculations also show that gaseous NO and N{sub 2}O cannot be scrubbed unless they are oxidized to nitrate or reduced to ammonia. (author) SIHTI 2 Research Programme. 59 refs.

  7. REFLECTIVE SOCIAL WORK EDUCATION IN SUPPORT OF SOCIALLY JUST SOCIAL WORK PRACTICE: THE EXPERIENCE OF SOCIAL WORK STUDENTS AT A UNIVERSITY IN SOUTH AFRICA

    OpenAIRE

    Esau, Merlene; Keet, Anneline

    2014-01-01

    Social justice and human dignity are core components of social work principles and ethics; therefore social work education should lead to socially just practice. Social workers’ ability to practise in a socially just manner relies significantly on their ability to reflect on the influence of their personal and professional socialisation and the structural inequalities that influence the lives of service users. In order to achieve a deep sense of social justice, social workers should be educat...

  8. Photovoltaic energy: solar components for the future from the LCS

    International Nuclear Information System (INIS)

    Queruel, Michel; Jary, Marc; Ganier, Aude

    2008-01-01

    The LCS - the solar components laboratory of LITEN1 Institute - is working with industry and research to devise silicon-based technologies for developing new materials, cells and manufacturing processes that offer improved performance at a lower cost. (authors)

  9. Working memory and language: an overview.

    Science.gov (United States)

    Baddeley, Alan

    2003-01-01

    Working memory involves the temporary storage and manipulation of information that is assumed to be necessary for a wide range of complex cognitive activities. In 1974, Baddeley and Hitch proposed that it could be divided into three subsystems, one concerned with verbal and acoustic information, the phonological loop, a second, the visuospatial sketchpad providing its visual equivalent, while both are dependent upon a third attentionally-limited control system, the central executive. A fourth subsystem, the episodic buffer, has recently been proposed. These are described in turn, with particular reference to implications for both the normal processing of language, and its potential disorders. The reader will be introduced to the concept of a multi-component working memory. Particular emphasis will be placed on the phonological loop component, and (a) its fractionation into a storage and processing component, (b) the neuropsychological evidence for this distinction, and (c) its implication for both native and second language learning. This will be followed by (d) a brief overview of the visuospatial sketchpad and its possible role in language, culminating in (e) discussion of the higher-level control functions of working memory which include (f) the central executive and its multi-dimensional storage system, the episodic buffer. An attempt throughout is made to link the model to its role in both normal and disordered language functions.

  10. [Investigating work, age, health and work participation in the ageing work force in Germany].

    Science.gov (United States)

    Ebener, M; Hasselhorn, H M

    2015-04-01

    Working life in Germany is changing. The work force is ageing and the number of people available to the labour market will - from now on - shrink considerably. Prospectively, people will have to work longer; but still today, most people leave employment long before reaching official retirement age. What are the reasons for this? In this report, a conceptual framework and the German lidA Cohort Study are presented. The "lidA conceptual framework on work, age, health and work participation" visualises determinants of employment (11 "domains") in higher working age, e. g., "work", "health", "social status" and "life style". The framework reveals 4 key characteristics of withdrawal from work: leaving working life is the result of an interplay of different domains (complexity); (early) retirement is a process with in part early determinants in the life course (processual character); retirement has a strong individual component (individuality); retirement is embedded in a strong structural frame (structure). On the basis of this framework, the "lidA Cohort Study on work, age, health and work participation" (www.lida-studie.de) investigates long-term effects of work on health and work participation in the ageing work force in Germany. It is the only large study in Germany operationalising the concept of employability in a broad interdisciplinary approach. Employees subject to social security and born in 1959 or in 1965 will be interviewed (CAPI) every 3 years (N[wave 1]=6 585, N[wave 2]=4 244) and their data will be linked (where consented) with social security data covering employment history and with health insurance data. The study design ("Schaie's most efficient design") allows for a tri-factor model that isolates the impact of age, cohort and time. In 2014, the second wave was completed. In the coming years lidA will analyse the association of work, health and work participation, and identify age as well as generation differences. lidA will investigate the

  11. Research on development model of nuclear component based on life cycle management

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    At present the development process of nuclear component, even nuclear component itself, is more and more supported by computer technology. This increasing utilization of the computer and software has led to the faster development of nuclear technology on one hand and also brought new problems on the other hand. Especially, the combination of hardware, software and humans has increased nuclear component system complexities to an unprecedented level. To solve this problem, Life Cycle Management technology is adopted in nuclear component system. Hence, an intensive discussion on the development process of a nuclear component is proposed. According to the characteristics of the nuclear component development, such as the complexities and strict safety requirements of the nuclear components, long-term design period, changeable design specifications and requirements, high capital investment, and satisfaction for engineering codes/standards, the development life-cycle model of nuclear component is presented. The development life-cycle model is classified at three levels, namely, component level development life-cycle, sub-component development life-cycle and component level verification/certification life-cycle. The purposes and outcomes of development processes are stated in detailed. A process framework for nuclear component based on system engineering and development environment of nuclear component is discussed for future research work. (authors)

  12. Radiation sources working group summary

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1998-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, components technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigation, and phenomena that impact source design such as fatigue in resonant structures due to RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  13. Osmotic actuation for microfluidic components in point-of-care applications

    KAUST Repository

    Chen, Yu-Chih; Ingram, Patrick; Lou, Xia; Yoon, Euisik

    2013-01-01

    at low cost. In this work, we report two key active components actuated by osmotic mechanism for total integrated microfluidic system. For the proof of concept, we have demonstrated valve actuation, which can maintain stable ON/OFF switching operations

  14. The Impact of Work Ability on Work Motivation and Health: A Longitudinal Study Based on Older Employees.

    Science.gov (United States)

    Feißel, Annemarie; Swart, Enno; March, Stefanie

    2018-05-01

    Work participation is determined by work motivation and work ability with health as a significant component. Within the lidA-study, we explore the impact of work ability on work motivation and health with consideration of further influencing factors. Four thousand one hundred nine older employees were interviewed two times (t0 = 2011, t1 = 2014). Two multivariate analyses were performed regarding the influence of work ability on work motivation (Model 1) and health (Model 2). Within the multivariate analysis, of all the influencing factors, work ability has the strongest effect on work motivation (F = 37.761) and health (F = 76.402). It appears as a decisive determinant for both dimensions. Regarding the results, it is useful to focus on the work ability of older employees in order to maintain and boost their work motivation and health.

  15. Three components of organizational commitment and job satisfaction of hospital nurses in Iran.

    Science.gov (United States)

    Jahangir, Fridoon; Shokrpour, Nasrin

    2009-01-01

    To measure the relationship between job satisfaction and the 3 components of organizational commitment. Most of the research conducted in the West has shown a positive relationship between organizational commitment and job satisfaction of nurses; however, the relationship between the components of organizational commitment and job satisfaction is not well established in Iranian samples. This study aimed to investigate the level of organizational commitment and job satisfaction of the hospital nurses in Iran and the interrelationship between the 3 components of commitment and job satisfaction among them. Using the organizational commitment questionnaire developed by Meyer et al (J Appl Psychol. 1993;78:538-551), the 3 components of commitment were measured through a descriptive correlational design. Seven hundred eighty-six licensed nurses working in 12 hospitals participated in the study. One hundred ninety-eight of 220 returned questionnaires were identified as appropriate for the analysis. Affective commitment was positively related to job satisfaction, normative commitment, and experience in nursing, but it was negatively related to continuance commitment. Continuance commitment was negatively related to job satisfaction and affective commitment. Normative commitment was positively related to job satisfaction and affective commitment. The 3 components of commitment are variously related to job satisfaction. Nursing managers should pay attention to different components of commitment variously to promote the appropriate type of commitment needed for specific situation in which they work.

  16. Feasibility and Testing of Additive Manufactured Components

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R [ORNL; Hummelt, Ed [Eaton Corporation; Solovyeva, Lyudmila [Eaton Corporation

    2016-09-01

    This project focused on demonstrating the ability to fabricate two parts with different geometry: an arc flash interrupter and a hydraulic manifold. Eaton Corporation provided ORNL solid models, information related to tolerances and sensitive parameters of the parts and provided testing and evaluation. ORNL successfully manufactured both components, provided cost models of the manufacturing (materials, labor, time and post processing) and delivered test components for Eaton evaluation. The arc flash suppressor was fabricated using the Renishaw laser powder bed technology in CoCrMo while the manifold was produced from Ti-6Al-4V using the Arcam electron beam melting technology. These manufacturing techniques were selected based on the design and geometrical tolerances required. A full-scale manifold was produced on the Arcam A2 system (nearly 12 inches tall). A portion of the manifold was also produced in the Arcam Q10 system. Although a full scale manifold could not be produced in the system, a full scale manifold is expected to have similar material properties, geometric accuracy, and surface finish as could be fabricated on an Arcam Q20 system that is capable of producing four full scale manifolds in a production environment. In addition to the manifold, mechanical test specimens, geometric tolerance artifacts, and microstructure samples were produced alongside the manifold. The development and demonstration of these two key components helped Eaton understand the impact additive manufacturing can have on many of their existing products. By working within the MDF and leveraging ORNL’s manufacturing and characterization capabilities, the work will ensure the rapid insertion and commercialization of this technology.

  17. Promoting Election-Related Policy Practice among Social Work Students

    Science.gov (United States)

    Pritzker, Suzanne; Burwell, Christianna

    2016-01-01

    Political involvement is an integral component of the social work profession, yet there is no explicit reference to social work participation in election-related activities in either the National Association of Social Workers Code of Ethics or the Council on Social Work Education Educational Policy and Accreditation Standards. Social work…

  18. Nuclear component design ontology building based on ASME codes

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    The adoption of ontology analysis in the study of concept knowledge acquisition and representation for the nuclear component design process based on computer-supported cooperative work (CSCW) makes it possible to share and reuse numerous concept knowledge of multi-disciplinary domains. A practical ontology building method is accordingly proposed based on Protege knowledge model in combination with both top-down and bottom-up approaches together with Formal Concept Analysis (FCA). FCA exhibits its advantages in the way it helps establish and improve taxonomic hierarchy of concepts and resolve concept conflict occurred in modeling multi-disciplinary domains. With Protege-3.0 as the ontology building tool, a nuclear component design ontology based ASME codes is developed by utilizing the ontology building method. The ontology serves as the basis to realize concept knowledge sharing and reusing of nuclear component design. (authors)

  19. Estimates of variance components for postweaning feed intake and ...

    African Journals Online (AJOL)

    Feed efficiency is of major economic importance in beef production. The objective of this work was to evaluate alternative measures of feed efficiency for use in genetic evaluation. To meet this objective, genetic parameters were estimated for the components of efficiency. These parameters were then used in multiple-trait ...

  20. Making components with controlled metal deposition

    OpenAIRE

    Ribeiro, António Fernando

    1997-01-01

    Rapid Prototyping is a recent CAD/CAM/CIM based manufacturing technique which produces prototypes of components in a fraction of the time. This technique works by first drawing the part as a 3 Dimensional solid model using a CAD program and then ‘printing’ it in 3 Dimensions. The raw material can be a photopolymer or thermoplastic which solidifies when in contact with light. Other materials are available although 100% metal is not a very usual one. This paper presents a new approach for a ...

  1. Solid-Liquid Equilibria for Many-component Mixtures Using Cubic-Plus-Association (CPA) equation of state

    DEFF Research Database (Denmark)

    Fettouhi, André; Thomsen, Kaj

    2010-01-01

    In the creation of liquefied natural gas the formation of solids play a substantial role, hence detailed knowledge is needed about solid-liquid equilibria (SLE). In this abstract we shortly summarize the work we have carried out at CERE over the past year with SLE for many-component mixtures usin...... the Cubic-Plus-Association (CPA) equation of state. Components used in this work are highly relevant to the oil and gas industry and include light and heavy hydrocarbons, alcohols, water and carbon dioxide....

  2. DISTRIBUTION OF HEAVY METALS AMONG THE COMPONENTS OF FRESHWATER ECOSYSTEMS (REVIEW)

    OpenAIRE

    N. Kolesnyk

    2014-01-01

    Purpose. To review scientific sources on the distribution of heavy metals among the components of freshwater ecosystems. Findings. The review of the works of many scientists showed that heavy metals are widespread in the biotic and abiotic components of freshwater ecosystems. The article highlights the distribution of heavy metals in water, bottom sediments, natural food base, fish organs and tissues. It has been shown that as a result of global pollution of the ecosystem, the majority of...

  3. Final Report for 'Center for Technology for Advanced Scientific Component Software'

    International Nuclear Information System (INIS)

    Shasharina, Svetlana

    2010-01-01

    The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

  4. The Stability and Reliability of a Modified Work Components Study Questionnaire in the Educational Organization.

    Science.gov (United States)

    Miskel, Cecil; Heller, Leonard E.

    The investigation attempted to establish the factorial validity and reliability of an industrial selection device based on Herzberg's theory of work motivation related to the school organization. The questionnaire was reworded to reflect an educational work situation; and a random sample of 197 students, 118 administrators, and 432 teachers was…

  5. Asymmetric cross-domain interference between two working memory tasks : Implications for models of working memory

    NARCIS (Netherlands)

    Morey, Candice C.; Morey, Richard D.; van der Reijden, Madeleine; Holweg, Margot

    2013-01-01

    Observations of higher dual-task costs for within-domain than cross-domain task combinations constitute classic evidence for multi-component models of working memory (e.g., Baddeley, 1986; Logie, 2011). However, we report an asymmetric pattern of interference between verbal and visual-spatial tasks,

  6. Defining quality of nursing work life.

    Science.gov (United States)

    Brooks, Beth A; Anderson, Mary Ann

    2005-01-01

    As the largest single employee component of hospitals, nurses are critical to the functioning of the organization, and improving employee productivity continues to be a common theme in the health care literature. However, any increased productivity will be transitory if achieved at the expense of the quality of nurses' work life (QNWL), since improvement in the QNWL is prerequisite to improved productivity. The conceptual components of the concept of QNWL that differentiate QNWL from the concept job satisfaction are explored.

  7. A Social Work Model of Empathy

    Directory of Open Access Journals (Sweden)

    Karen E. Gerdes

    2009-12-01

    Full Text Available This article presents a social work model of empathy that reflects the latest interdisciplinary research findings on empathy. The model reflects the social work commitment to social justice. The three model components are: 1 the affective response to another’s emotions and actions; 2 the cognitive processing of one’s affective response and the other person’s perspective; and 3 the conscious decision-making to take empathic action. Mirrored affective responses are involuntary, while cognitive processing and conscious decision-making are voluntary. The affective component requires healthy, neural pathways to function appropriately and accurately. The cognitive aspects of perspective-taking, self-awareness, and emotion regulation can be practiced and cultivated, particularly through the use of mindfulness techniques. Empathic action requires that we move beyond affective responses and cognitive processing toward utilizing social work values and knowledge to inform our actions. By introducing the proposed model of empathy, we hope it will serve as a catalyst for discussion and future research and development of the model. Key Words: Empathy, Social Empathy, Social Cognitive Neuroscience

  8. Results report on research and development work 1979 of the Institute for Reactor Components

    International Nuclear Information System (INIS)

    1980-02-01

    Projects concerning the following problems were worked on during 1979: Fuel rod behaviour during loss-of-coolant accidents. Heat exchange and flow processes in single channel and multi-channel geometries in regular and disturbed geometry, as well as liquid metal targets. Two phase mass flow measuring process. Hydraulically pulsed sieve tray columns. Thermal behaviour of core melting. - Accident detection in sodium-cooled breeder. Abrasion, wear and welding behaviour of reactor specific materials under the effect of coolant. Design of fuel rod bundles. The greater part of the problems worked on are connected with the projects PNS, PSB and PWA. (orig./HP) [de

  9. The Relation of Work, Family Balance, and Life Quality of Nurses Working at Teaching Hospitals of Kerman-Iran

    Directory of Open Access Journals (Sweden)

    Zeynab Sedoughi

    2016-08-01

    Full Text Available Background: Work and family are the source of tranquility and if the balance between these two is not provided, pleasure, happiness and peace of human being would be lost, which will cause unreturnable loss for him. Regarding the importance of nurses’ role in health system, the present study aimed to study the relation of work-family balance and quality of life of nurses working at selected Iranian teaching hospitals. Methods: Present study is a cross sectional, descriptive-analytical study which was carried out on 306 nurses working at three teaching hospitals of Iran. The sampling method was stratified sampling and questionnaire was the data collection instrument. Data analysis was carried out using inferential statistics through SPSS Ver18. Findings: nurses spent more time to work than family and they had more satisfaction of their family life than their work. This suggests the imbalance of nurses in two dimension of time balance and satisfaction balance, which has resulted a decrease in quality of life of studied nurses. Nurse’s involvement in work and life as the third component of work-life balance concept, was balanced and it did not indicate significant correlation with quality of life. Nurses experiencing less work-family conflict and more stress in their life, had higher level of quality of life. Conclusion: Nurses will be more exposed to the negative outcomes of work-life imbalance than other groups of employees, so paying attention to managing the demands of work and family aimed at improving the nurses’ quality of life, has specific importance. Hence, designing a plan which defines main components of work-family balance among various groups of hospital staff including nurses, should be put at the top agenda of Iran’s health system policy makers. 

  10. Working Memory: A Selective Review.

    Science.gov (United States)

    Kent, Phillip L

    2016-01-01

    The purpose of this paper is to provide a selective overview of the evolution of the concept and assessment of working memory, and how its assessment has been confused with the assessment of some components of attention. A literature search using PsychNet Gold was conducted using the terms working memory. In addition, the writer reviewed recommendations from a sampling of recent neuropsychology texts in regard to the assessment of attention and working memory, as well as the two most recent editions of the Wechsler Memory Scale. It is argued that many clinicians have an incomplete understanding of the relationship between attention and working memory, and often conflate the two in assessment and treatment. Suggestions were made for assessing these abilities.

  11. Research program Integrity of Components (FKS). A substantial contribution to component safety

    International Nuclear Information System (INIS)

    Kussmaul, K.; Roos, E.; Foehl, J.

    1998-01-01

    The main objectives pursued are: (a) verify the quality of reactor pressure vessels in existing LWR-type reactors, and (b) quantify the safety margin using both specified and non-specified materials and welds. On the basis of knowledge obtained through earlier programmes, the research project was to examine in particular deviations from the specified materials properties, for more exact quantification of the safety margin before RPV failure. There are three major factors influencing the component performance until failure, which are aggregate material fatigue, flaws, loading conditions, and the research work was to focus on the materials properties. An item of main interest was to assess the impact of long service life on the materials properties, assuming particularly unfavourable boundary conditions for materials properties and operational loads. (orig./CB) [de

  12. Cloning and joint measurements of incompatible components of spin

    International Nuclear Information System (INIS)

    Brougham, Thomas; Andersson, Erika; Barnett, Stephen M.

    2006-01-01

    A joint measurement of two observables is a simultaneous measurement of both quantities upon the same quantum system. When two quantum-mechanical observables do not commute, then a joint measurement of these observables cannot be accomplished directly by projective measurements alone. In this paper we shall discuss the use of quantum cloning to perform a joint measurement of two components of spin associated with a qubit system. We introduce cloning schemes which are optimal with respect to this task. The cloning schemes may be thought to work by cloning two components of spin onto their outputs. We compare the proposed cloning machines to existing cloners

  13. Osmotic actuation for microfluidic components in point-of-care applications

    KAUST Repository

    Chen, Yu-Chih

    2013-01-01

    We present a novel design of micropumps and valves driven by osmotic force for point-of-care applications. Although there have been significant progresses in microfluidic components and control devices such as fluidic diodes, switches, resonators and digital-to-analog converters, the ultimate power source still depends on bulky off-chip components, which are expensive and cannot be easily miniaturized. For point-of-care applications, it is critical to integrate all the components in a compact size at low cost. In this work, we report two key active components actuated by osmotic mechanism for total integrated microfluidic system. For the proof of concept, we have demonstrated valve actuation, which can maintain stable ON/OFF switching operations under 125 kPa back pressure. We have also implemented an osmotic pump, which can pump a high flow rate over 30 μL/min for longer than 30 minutes. The experimental data demonstrates the possibility and potential of applying osmotic actuation in point-of-care disposable microfluidics. © 2013 IEEE.

  14. Postural responses to specific types of working memory tasks

    NARCIS (Netherlands)

    Ramenzoni, V.C.; Riley, M.A.; Shockley, K.; Chiu, C.Y.P.

    2007-01-01

    Standing participants performed working memory tasks that varied along three dimensions: (1) type of information presented (verbal or visual); (2) the primary cognitive process engaged (encoding or rehearsal); and (3) interference that targeted the working memory components (phonological loop and

  15. Rhythms of life: antecedents and outcomes of work-family balance in employed parents.

    Science.gov (United States)

    Aryee, Samuel; Srinivas, E S; Tan, Hwee Hoon

    2005-01-01

    This study examined antecedents and outcomes of a fourfold taxonomy of work-family balance in terms of the direction of influence (work-family vs. family-work) and type of effect (conflict vs. facilitation). Respondents were full-time employed parents in India. Confirmatory factor analysis results provided evidence for the discriminant validity of M. R. Frone's (2003) fourfold taxonomy of work-family balance. Results of moderated regression analysis revealed that different processes underlie the conflict and facilitation components. Furthermore, gender had only a limited moderating influence on the relationships between the antecedents and the components of work-family balance. Last, work-family facilitation was related to the work outcomes of job satisfaction and organizational commitment.

  16. Independent Component Analysis in Multimedia Modeling

    DEFF Research Database (Denmark)

    Larsen, Jan

    2003-01-01

    largely refers to text, images/video, audio and combinations of such data. We review a number of applications within single and combined media with the hope that this might provide inspiration for further research in this area. Finally, we provide a detailed presentation of our own recent work on modeling......Modeling of multimedia and multimodal data becomes increasingly important with the digitalization of the world. The objective of this paper is to demonstrate the potential of independent component analysis and blind sources separation methods for modeling and understanding of multimedia data, which...

  17. Prevalence of Metabolic Syndrome among Working Adults in Ethiopia

    Directory of Open Access Journals (Sweden)

    A. Tran

    2011-01-01

    Conclusion. MetS and its individual components are prevalent among an apparently healthy working population in Ethiopia. These findings indicate the need for evidence-based health promotion and disease prevention programs; and more robust efforts directed towards the screening, diagnosis and management of MetS and its components among Ethiopian adults.

  18. Reliability of optical fibres and components final report of COST 246

    CERN Document Server

    Griffioen, Willem; Gadonna, Michel; Limberger, Hans; Heens, Bernard; Knuuttila, Hanna; Kurkjian, Charles; Mirza, Shehzad; Opacic, Aleksandar; Regio, Paola; Semjonov, Sergei

    1999-01-01

    Reliability of Optical Fibres and Components reports the findings of COST 246 (1993-1998) - European research initiative in the field of optical telecommunications. Experts in the materials and reliability field of optical fibres and components have contributed to this unique study programme. The results, conclusions and achievements of their work have been obtained through joint experimentation and discussion with representatives from manufacturing and research groups. Topics covered include: Lifetime estimation; Failure mechanisms; Ageing test methods; Field data and service environments for components. For the first time the reader can explore the reliability of products and examine the results and conclusions in published form. This comprehensive volume is intended to provide a deeper understanding of the reliability of optical fibres and components. The book will be extremely useful to all scientists and practitioners involved in the industry.

  19. Maintenance Management Support Systems for component aging estimation at nuclear power plants

    International Nuclear Information System (INIS)

    Shimizu, Shunichi; Ando, Yasumasa; Morioka, Toshihiko; Okuzumi, Naoaki

    1991-01-01

    Maintenance Management Support Systems (MMSSs) for nuclear power plants have been developed using component aging estimation methods and decision tree analysis for maintenance planning. The former evaluates actual component reliability through statistical analysis on field maintenance data. The latter provides preventive maintenance (PM) planning guidance using heuristic expert knowledge and estimated reliability parameters. The following aspects have been investigated: (1) A systematic and effective method of managing components/parts design information and field maintenance data (2) A method for estimating component aging based on a statistical analysis of field maintenance data (3) A method for providing PM planning guidance using estimated component reliability/performance parameters and decision tree analysis. Based on these investigations, two MMSSs were developed. One deals with 'general maintenance data', which are common to all component types and are amenable to common data handling. The other system deals with 'specific maintenance data', which are specific to an individual component type. Both systems provide PM planning guidance for PM cycles propriety and the PM work priority. The function of these systems were verified using simulated maintenance data. (author)

  20. AAGBI guidelines: the use of blood components and their alternatives 2016.

    Science.gov (United States)

    Klein, A A; Arnold, P; Bingham, R M; Brohi, K; Clark, R; Collis, R; Gill, R; McSporran, W; Moor, P; Rao Baikady, R; Richards, T; Shinde, S; Stanworth, S; Walsh, T S

    2016-07-01

    Blood transfusion can be life-saving. Anaesthetists regularly request and administer blood components to their patients. All anaesthetists must be familiar with indications and appropriate use of blood and blood components and their alternatives, but close liaison with haematology specialists and their local blood sciences laboratory is encouraged. Considerable changes in approaches to optimal use of blood components, together with the use of alternative products, have become apparent over the past decade, leading to a need to update previous guidelines and adapt them for the use of anaesthetists working throughout the hospital system. © 2016 The Authors. Anaesthesia published by John Wiley & Sons Ltd on behalf of Association of Anaesthetists of Great Britain and Ireland.

  1. New dynamic silicon photonic components enabled by MEMS technology

    Science.gov (United States)

    Errando-Herranz, Carlos; Edinger, Pierre; Colangelo, Marco; Björk, Joel; Ahmed, Samy; Stemme, Göran; Niklaus, Frank; Gylfason, Kristinn B.

    2018-02-01

    Silicon photonics is the study and application of integrated optical systems which use silicon as an optical medium, usually by confining light in optical waveguides etched into the surface of silicon-on-insulator (SOI) wafers. The term microelectromechanical systems (MEMS) refers to the technology of mechanics on the microscale actuated by electrostatic actuators. Due to the low power requirements of electrostatic actuation, MEMS components are very power efficient, making them well suited for dense integration and mobile operation. MEMS components are conventionally also implemented in silicon, and MEMS sensors such as accelerometers, gyros, and microphones are now standard in every smartphone. By combining these two successful technologies, new active photonic components with extremely low power consumption can be made. We discuss our recent experimental work on tunable filters, tunable fiber-to-chip couplers, and dynamic waveguide dispersion tuning, enabled by the marriage of silicon MEMS and silicon photonics.

  2. Reliability analysis of a repairable k-out-of-n system with some components being suspended when the system is down

    International Nuclear Information System (INIS)

    Li Xiaohu; Zuo, Ming J.; Yam, Richard C.M.

    2006-01-01

    A k-out-of-n system with independent exponential components is investigated. It is assumed that some working components are suspended as soon as the system is down, repair starts immediately when a component fails and repair times are independent and exponentially distributed. Formulas for various reliability indices of the system including mean time between failures, mean working time in a failure-repair cycle, and mean down time in a failure-repair cycle are derived

  3. Principal Components of Superhigh-Dimensional Statistical Features and Support Vector Machine for Improving Identification Accuracies of Different Gear Crack Levels under Different Working Conditions

    Directory of Open Access Journals (Sweden)

    Dong Wang

    2015-01-01

    Full Text Available Gears are widely used in gearbox to transmit power from one shaft to another. Gear crack is one of the most frequent gear fault modes found in industry. Identification of different gear crack levels is beneficial in preventing any unexpected machine breakdown and reducing economic loss because gear crack leads to gear tooth breakage. In this paper, an intelligent fault diagnosis method for identification of different gear crack levels under different working conditions is proposed. First, superhigh-dimensional statistical features are extracted from continuous wavelet transform at different scales. The number of the statistical features extracted by using the proposed method is 920 so that the extracted statistical features are superhigh dimensional. To reduce the dimensionality of the extracted statistical features and generate new significant low-dimensional statistical features, a simple and effective method called principal component analysis is used. To further improve identification accuracies of different gear crack levels under different working conditions, support vector machine is employed. Three experiments are investigated to show the superiority of the proposed method. Comparisons with other existing gear crack level identification methods are conducted. The results show that the proposed method has the highest identification accuracies among all existing methods.

  4. Working Memory and Down Syndrome

    Science.gov (United States)

    Baddeley, A.; Jarrold, C.

    2007-01-01

    A brief account is given of the evolution of the concept of working memory from a unitary store into a multicomponent system. Four components are distinguished, the phonological loop which is responsible for maintaining speech-based information, the visuospatial sketchpad performing a similar function for visual information, the central executive…

  5. Another link to improving the working environment in acute care hospitals: registered nurses' spirit at work.

    Science.gov (United States)

    Urban, Ann-Marie; Wagner, Joan I

    2013-12-01

    Hospitals are situated within historical and socio-political contexts; these influence the provision of patient care and the work of registered nurses (RNs). Since the early 1990s, restructuring and the increasing pressure to save money and improve efficiency have plagued acute care hospitals. These changes have affected both the work environment and the work of nurses. After recognizing this impact, healthcare leaders have dedicated many efforts to improving the work environment in hospitals. Admirable in their intent, these initiatives have made little change for RNs and their work environment, and thus, an opportunity exists for other efforts. Research indicates that spirit at work (SAW) not only improves the work environment but also strengthens the nurse's power to improve patient outcomes and contribute to a high-quality workplace. In this paper, we present findings from our research that suggest SAW be considered an important component in improving the work environment in acute care hospitals.

  6. A Conceptual Model of the World of Work.

    Science.gov (United States)

    VanRooy, William H.

    The conceptual model described in this paper resulted from the need to organize a body of knowledge related to the world of work which would enable curriculum developers to prepare accurate, realistic instructional materials. The world of work is described by applying Malinowski's scientific study of the structural components of culture. It is…

  7. Verbal Working Memory in Children with Cochlear Implants

    Science.gov (United States)

    Nittrouer, Susan; Caldwell-Tarr, Amanda; Low, Keri E.; Lowenstein, Joanna H.

    2017-01-01

    Purpose: Verbal working memory in children with cochlear implants and children with normal hearing was examined. Participants: Ninety-three fourth graders (47 with normal hearing, 46 with cochlear implants) participated, all of whom were in a longitudinal study and had working memory assessed 2 years earlier. Method: A dual-component model of…

  8. Working memory dysfunctions predict social problem solving skills in schizophrenia.

    Science.gov (United States)

    Huang, Jia; Tan, Shu-ping; Walsh, Sarah C; Spriggens, Lauren K; Neumann, David L; Shum, David H K; Chan, Raymond C K

    2014-12-15

    The current study aimed to examine the contribution of neurocognition and social cognition to components of social problem solving. Sixty-seven inpatients with schizophrenia and 31 healthy controls were administrated batteries of neurocognitive tests, emotion perception tests, and the Chinese Assessment of Interpersonal Problem Solving Skills (CAIPSS). MANOVAs were conducted to investigate the domains in which patients with schizophrenia showed impairments. Correlations were used to determine which impaired domains were associated with social problem solving, and multiple regression analyses were conducted to compare the relative contribution of neurocognitive and social cognitive functioning to components of social problem solving. Compared with healthy controls, patients with schizophrenia performed significantly worse in sustained attention, working memory, negative emotion, intention identification and all components of the CAIPSS. Specifically, sustained attention, working memory and negative emotion identification were found to correlate with social problem solving and 1-back accuracy significantly predicted the poor performance in social problem solving. Among the dysfunctions in schizophrenia, working memory contributed most to deficits in social problem solving in patients with schizophrenia. This finding provides support for targeting working memory in the development of future social problem solving rehabilitation interventions. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  9. Temporal dynamics of visual working memory.

    Science.gov (United States)

    Sobczak-Edmans, M; Ng, T H B; Chan, Y C; Chew, E; Chuang, K H; Chen, S H A

    2016-01-01

    The involvement of the human cerebellum in working memory has been well established in the last decade. However, the cerebro-cerebellar network for visual working memory is not as well defined. Our previous fMRI study showed superior and inferior cerebellar activations during a block design visual working memory task, but specific cerebellar contributions to cognitive processes in encoding, maintenance and retrieval have not yet been established. The current study examined cerebellar contributions to each of the components of visual working memory and presence of cerebellar hemispheric laterality was investigated. 40 young adults performed a Sternberg visual working memory task during fMRI scanning using a parametric paradigm. The contrast between high and low memory load during each phase was examined. We found that the most prominent activation was observed in vermal lobule VIIIb and bilateral lobule VI during encoding. Using a quantitative laterality index, we found that left-lateralized activation of lobule VIIIa was present in the encoding phase. In the maintenance phase, there was bilateral lobule VI and right-lateralized lobule VIIb activity. Changes in activation in right lobule VIIIa were present during the retrieval phase. The current results provide evidence that superior and inferior cerebellum contributes to visual working memory, with a tendency for left-lateralized activations in the inferior cerebellum during encoding and right-lateralized lobule VIIb activations during maintenance. The results of the study are in agreement with Baddeley's multi-component working memory model, but also suggest that stored visual representations are additionally supported by maintenance mechanisms that may employ verbal coding. Copyright © 2015 Elsevier Inc. All rights reserved.

  10. Review on characterization methods applied to HTR-fuel element components

    International Nuclear Information System (INIS)

    Koizlik, K.

    1976-02-01

    One of the difficulties which on the whole are of no special scientific interest, but which bear a lot of technical problems for the development and production of HTR fuel elements is the proper characterization of the element and its components. Consequently a lot of work has been done during the past years to develop characterization procedures for the fuel, the fuel kernel, the pyrocarbon for the coatings, the matrix and graphite and their components binder and filler. This paper tries to give a status report on characterization procedures which are applied to HTR fuel in KFA and cooperating institutions. (orig.) [de

  11. Structural integrity assessment of piping components

    International Nuclear Information System (INIS)

    Kushwaha, H.S.; Chattopadhyay, J.

    2008-01-01

    Integrity assessment of piping components is very essential for safe and reliable operation of power plants. Over the last several decades, considerable work has been done throughout the world to develop a methodology for integrity assessment of pipes and elbows, appropriate for the material involved. However, there is scope of further development/improvement of issues, particularly for pipe bends, that are important for accurate integrity assessment of piping. Considering this aspect, a comprehensive Component Integrity Test Program was initiated in 1998 at Bhabha Atomic Research Centre (BARC), India. In this program, both theoretical and experimental investigations were undertaken to address various issues related to the integrity assessment of pipes and elbows. Under the experimental investigations, fracture mechanics tests have been conducted on pipes and elbows of 200-400 mm nominal bore (NB) diameter with various crack configurations and sizes under different loading conditions. Tests on small tensile and three point bend specimens, machined from the tested pipes, have also been done to evaluate the actual stress-strain and fracture resistance properties of pipe/elbow material. The load-deflection curve and crack initiation loads predicted by non-linear finite element analysis matched well with the experimental results. The theoretical collapse moments of throughwall circumferentially cracked elbows, predicted by the recently developed equations, are found to be closer to the test data compared to the other existing equations. The role of stress triaxialities ahead of crack tip is also shown in the transferability of J-Resistance curve from specimen to component. The cyclic loading and system compliance effect on the load carrying capacity of piping components are investigated and new recommendations are made. (author)

  12. Electromagnetic Components of Auroral Hiss and Lower Hybrid Waves in the Polar Magnetosphere

    Science.gov (United States)

    Wong, H. K.

    1995-01-01

    DE-1 has frequently observed waves in the whistler and lower hybrid frequencies range. Besides the electrostatic components, these waves also exhibit electromagnetic components. It is generally believed that these waves are excited by the electron acoustic instability and the electron-beam-driven lower hybrid instability. Because the electron acoustic and the lower hybrid waves are predominately electrostatic waves, they cannot account for the observed electromagnetic components. In this work, it is suggested that these electromagnetic components can be explained by waves that are generated near the resonance cone and that propagate away from the source. The role that these electromagnetic waves can play in particle acceleration processes at low altitude is discussed.

  13. Design of the Mechanical Components of a Dual Axis Solar Tracker

    OpenAIRE

    Romero Llanas, Amador

    2013-01-01

    This work is about the design of a solar tracker with the objective of following the sun throughout the day. In order to achieve that objective, the solar tracker has two degrees of freedom. The different mechanical components necessary to build the structure has been designed, calculated and verified. Apart from that, the whole structure has been drawn using the 3D mechanical CAD program SolidWorks. The plans have been drawn too.

  14. Revitalizing social work education through global and critical awareness

    DEFF Research Database (Denmark)

    Flem, Aina Lian; Jönsson, Jessica H.; Alseth, Ann Kristin

    2017-01-01

    and critical components in theoretical courses, professional training and field practice in the social work education of the countries in question. It is argued that social work education should move beyond the old division of classical and international/intercultural toward including global and critical...

  15. Fast Component Pursuit for Large-Scale Inverse Covariance Estimation.

    Science.gov (United States)

    Han, Lei; Zhang, Yu; Zhang, Tong

    2016-08-01

    The maximum likelihood estimation (MLE) for the Gaussian graphical model, which is also known as the inverse covariance estimation problem, has gained increasing interest recently. Most existing works assume that inverse covariance estimators contain sparse structure and then construct models with the ℓ 1 regularization. In this paper, different from existing works, we study the inverse covariance estimation problem from another perspective by efficiently modeling the low-rank structure in the inverse covariance, which is assumed to be a combination of a low-rank part and a diagonal matrix. One motivation for this assumption is that the low-rank structure is common in many applications including the climate and financial analysis, and another one is that such assumption can reduce the computational complexity when computing its inverse. Specifically, we propose an efficient COmponent Pursuit (COP) method to obtain the low-rank part, where each component can be sparse. For optimization, the COP method greedily learns a rank-one component in each iteration by maximizing the log-likelihood. Moreover, the COP algorithm enjoys several appealing properties including the existence of an efficient solution in each iteration and the theoretical guarantee on the convergence of this greedy approach. Experiments on large-scale synthetic and real-world datasets including thousands of millions variables show that the COP method is faster than the state-of-the-art techniques for the inverse covariance estimation problem when achieving comparable log-likelihood on test data.

  16. Excessive work or addiction to work: workaholism in a Colombian company. Pilot study trough application of DUWAS test

    Directory of Open Access Journals (Sweden)

    Juan Alberto Castillo

    2012-09-01

    Full Text Available This paper examines the workaholism phenomenon in different work situations in Colombian company. Workaholism was defined as the individual’s steady and considerable allocation of time to work, which is not derived from external necessities (1. The research studies about workaholics and workaholism have been increasing a lot in the last years (2. Workaholism is an addiction that actually is affecting a lot of people around the world and has serious consequences in personal life, in the community and also in economy. Some of these researches are directed to explore ways to diagnose when a person is workaholic and when this situation may affect the performance of the individual in work, daily life activities and especially in psychosocial area. Objective: this pilot study contributes to identify if Colombian workers present the main characteristics of workaholism and if the job they perform is related to the presence of the characteristics of this addiction. Materials and method: for this pilot study used the Dutch Work Addiction Scale (DUWAS, this test suggests when a person has work addiction, trough the evaluation of two main components working excessively and working compulsively. Results: the study find differences for the two groups: the 67% of the AE group are over the average while only the 33% of the members of the O group are over it. Conclusions: these percentages show that the combinations of the components of workaholism are more evident in the population belonging to the administrative/executive jobs group, giving evidence that workaholism is presented in greater proportion in the population performance management positions.

  17. Performance Evaluation of Components Using a Granularity-based Interface Between Real-Time Calculus and Timed Automata

    Directory of Open Access Journals (Sweden)

    Karine Altisen

    2010-06-01

    Full Text Available To analyze complex and heterogeneous real-time embedded systems, recent works have proposed interface techniques between real-time calculus (RTC and timed automata (TA, in order to take advantage of the strengths of each technique for analyzing various components. But the time to analyze a state-based component modeled by TA may be prohibitively high, due to the state space explosion problem. In this paper, we propose a framework of granularity-based interfacing to speed up the analysis of a TA modeled component. First, we abstract fine models to work with event streams at coarse granularity. We perform analysis of the component at multiple coarse granularities and then based on RTC theory, we derive lower and upper bounds on arrival patterns of the fine output streams using the causality closure algorithm. Our framework can help to achieve tradeoffs between precision and analysis time.

  18. Assessing Working Memory in Children: The Comprehensive Assessment Battery for Children - Working Memory (CABC-WM).

    Science.gov (United States)

    Cabbage, Kathryn; Brinkley, Shara; Gray, Shelley; Alt, Mary; Cowan, Nelson; Green, Samuel; Kuo, Trudy; Hogan, Tiffany P

    2017-06-12

    The Comprehensive Assessment Battery for Children - Working Memory (CABC-WM) is a computer-based battery designed to assess different components of working memory in young school-age children. Working memory deficits have been identified in children with language-based learning disabilities, including dyslexia 1 , 2 and language impairment 3 , 4 , but it is not clear whether these children exhibit deficits in subcomponents of working memory, such as visuospatial or phonological working memory. The CABC-WM is administered on a desktop computer with a touchscreen interface and was specifically developed to be engaging and motivating for children. Although the long-term goal of the CABC-WM is to provide individualized working memory profiles in children, the present study focuses on the initial success and utility of the CABC-WM for measuring central executive, visuospatial, phonological loop, and binding constructs in children with typical development. Immediate next steps are to administer the CABC-WM to children with specific language impairment, dyslexia, and comorbid specific language impairment and dyslexia.

  19. Component reliability criticality or importance metrics for systems with degrading components

    NARCIS (Netherlands)

    Peng, H.; Coit, D.W.; Feng, Q.

    2012-01-01

    This paper proposes two new importance measures: one new importance measure for systems with -independent degrading components, and another one for systems with -correlated degrading components. Importance measures in previous research are inadequate for systems with degrading components because

  20. Influence of Gasoline Components on Engine Efficiency and Emissions

    Directory of Open Access Journals (Sweden)

    Machado Guilherme B.

    2016-01-01

    Full Text Available For the next few decades, it is expected that fossil fuels and bio-fuels used in internal combustion engines will remain the primary source for vehicular propulsion. This justifies the intense worldwide research and development effort to comply with the challenges of increasing efficiency and reducing internal combustion engine emissions. The modeling of commercial fuels and engine combustion processes presents great challenges. There is also the need to better understand how different fuel components interact and influence engine combustion and performance parameters. In the present work, surrogate fuels were used to implement methodologies to evaluate the influence of fuel components on fuel properties and multiple engine combustion and performance parameters. Special attention is given to engine efficiency and emissions behavior and their correlations to fuel properties and others performance parameters of the engine. The potentials of each component and corresponding chemical group were identified for different engine designs. The results combine information and methodologies that can be used to develop fuels for different applications.

  1. Nanoscale imaging and identification of four-component carbon sample

    Energy Technology Data Exchange (ETDEWEB)

    Sheremet, Evgeniya S [ORNL; Rodriguez, Raul [Chemnitz University of Technology, Germany; Agapov, Alexander L [ORNL; Sokolov, Alexei P [ORNL; Hietschold, Michael [Chemnitz University of Technology, Germany; Zahn, Dietrich [Chemnitz University of Technology, Germany

    2015-01-01

    We demonstrate the unprecedented chemical imaging of individual constituents in a four-component sample made of several carbon allotropes: single-wall carbon nanotubes, graphene oxide, C60 fullerene, and an organic residue. This represents a significant advance with respect to previous works that were mainly limited to systems with one or two components having very different chemical composition. Despite the spectral and spatial overlap from different components, plasmon-based nanospectroscopy allows the discrimination of all individual carbon nanomaterials here investigated. Among other physical insights such as doping observed in carbon nanotubes, the detailed chemical imaging of graphene oxide reveals higher defect concentration at the flake edges similarly to the case of graphene. We found that the organic residue has either low adsorption or lack of resonant enhancement on GO, in contrast to graphene, suggesting a decreased van der Waals interaction. Furthermore, this report paves the way for routine nanoscale analysis of complex carbon systems with spatial resolution of 15 nm and below.

  2. Collaborative Encoding and Memory Accuracy: Examining the Effects of Interactive Components of Co-Construction Processes

    Science.gov (United States)

    Foley, Mary Ann; Fried, Adina Rachel; Cowan, Emily; Bays, Rebecca Brooke

    2014-01-01

    In 2 experiments, the effect of collaborative encoding on memory was examined by testing 2 interactive components of co-construction processes. One component focused on the nature of the interactive exchange between collaborators: As the partners worked together to create descriptions about ways to interact with familiar objects, constraints were…

  3. Dissecting components of population-level variation in seed production and the evolution of masting behavior.

    Science.gov (United States)

    W. D. Koenig; D. Kelly; V. L. Sork; R. P. Duncan; J. S. Elkinton; M.S. Peltonen; R. D. Westfall

    2003-01-01

    Mast-fruiting or masting behavior is the cumulative result of the reproductive patterns of individuals within a population and thus involves components of individual variability, between-individual synchrony, and endogenous cycles of temporal autocorrelation. Extending prior work by Herrera, we explore the interrelationships of these components using data on individual...

  4. A Stakeholder-Based System Dynamics Model of Return-to-Work: A Research Protocol.

    Science.gov (United States)

    Jetha, Arif; Pransky, Glenn; Fish, Jon; Jeffries, Susan; Hettinger, Lawrence J

    2015-07-16

    Returning to work following a job-related injury or illness can be a complex process, influenced by a range of interrelated personal, psychosocial, and organizational components. System dynamics modelling (SDM) takes a sociotechnical systems perspective to view return-to-work (RTW) as a system made up of multiple feedback relationships between influential components. To build the RTW SDM, a mixed-method approach will be used. The first stage, that has already been completed, involved creating a baseline model using key informant interviews. Second, in two manufacturing companies, stakeholder-based models will be developed through interviews and focus groups with senior management, frontline workers, and frontline supervisors. Participants will be asked about the RTW process in general and more targeted questions regarding influential components. Participants will also be led through a reference mode exercise where they will be asked to estimate the direction, shape and magnitude of relationships between influential components. Data will be entered into the software program Vensim that provides a platform for visualizing system-structure and simulating the effects of adapting components. Finally, preliminary model validity testing will be conducted to provide insights on model generalizability and sensitivity. The proposed methodology will create a SDM of the RTW process using feedback relationships of influential components. It will also provide an important simulation tool to understand system behaviour that underlies complex RTW cases, and examine anticipated and unanticipated consequences of disability management policies. Significance for public healthWhile the incidence of occupational injuries and illnesses has declined over the past two decades, the proportion resulting in sickness absence has actually increased. Implementing strategies to address sickness absences and promote return-to-work (RTW) can significantly benefit physical and mental health, and

  5. Suggested Research Method for Testing Selected Tribological Properties of Friction Components in Vehicle Braking Systems

    Directory of Open Access Journals (Sweden)

    Borawski Andrzej

    2016-09-01

    Full Text Available The braking system is one of the most important systems in any vehicle. Its proper functioning may determine the health and life the people inside the vehicle as well as other road users. Therefore, it is important that the parameters which characterise the functioning of brakes changed as little as possible throughout their lifespan. Multiple instances of heating and cooling of the working components of the brake system as well as the environment they work in may impact their tribological properties. This article describes a method of evaluating the coefficient of friction and the wear speed of abrasive wear of friction working components of brakes. The methodology was developed on the basis of Taguchi’s method of process optimization.

  6. Hot isostatically pressed (HIPed) thick-walled component for a pressurised water reactor (PWR) application

    International Nuclear Information System (INIS)

    Hookham, I.; Burdett, B.; Bridger, K.; Sulley, J.L.

    2009-01-01

    This paper presents the work conducted to justify and provide a quality assured HIPed thick-walled component for a PWR application; the component being designed and manufactured by Rolls-Royce. Rolls-Royce has previously published (ICAPP 08) its overall, staged approach to the introduction of powder HIPed components; starting with thin-walled, leak limited pressure boundaries, and culminating in the use of the powder HIPed process for thick walled components. This paper presents details specific to a thick walled pressure vessel component. Results are presented of non-destructive and destructive examinations of one of a batch of components. Mechanical testing and metallurgical examination results of sample material taken from different sections of the component are presented. A full range of test results is provided covering, as examples: tensile, Charpy impact and sensitization susceptibility. Differences in weldability between the HIPed and the previous forged form are also documented. (author)

  7. Differences in brain morphology and working memory capacity across childhood.

    Science.gov (United States)

    Bathelt, Joe; Gathercole, Susan E; Johnson, Amy; Astle, Duncan E

    2018-05-01

    Working memory (WM) skills are closely associated with learning progress in key areas such as reading and mathematics across childhood. As yet, however, little is known about how the brain systems underpinning WM develop over this critical developmental period. The current study investigated whether and how structural brain correlates of components of the working memory system change over development. Verbal and visuospatial short-term and working memory were assessed in 153 children between 5.58 and 15.92 years, and latent components of the working memory system were derived. Fractional anisotropy and cortical thickness maps were derived from T1-weighted and diffusion-weighted MRI and processed using eigenanatomy decomposition. There was a greater involvement of the corpus callosum and posterior temporal white matter in younger children for performance associated with the executive part of the working memory system. For older children, this was more closely linked with the thickness of the occipitotemporal cortex. These findings suggest that increasing specialization leads to shifts in the contribution of neural substrates over childhood, moving from an early dependence on a distributed system supported by long-range connections to later reliance on specialized local circuitry. Our findings demonstrate that despite the component factor structure being stable across childhood, the underlying brain systems supporting working memory change. Taking the age of the child into account, and not just their overall score, is likely to be critical for understanding the nature of the limitations on their working memory capacity. © 2017 The Authors. Developmental Science Published by John Wiley & Sons Ltd.

  8. Perceived Synchrony of Frog Multimodal Signal Components Is Influenced by Content and Order.

    Science.gov (United States)

    Taylor, Ryan C; Page, Rachel A; Klein, Barrett A; Ryan, Michael J; Hunter, Kimberly L

    2017-10-01

    Multimodal signaling is common in communication systems. Depending on the species, individual signal components may be produced synchronously as a result of physiological constraint (fixed) or each component may be produced independently (fluid) in time. For animals that rely on fixed signals, a basic prediction is that asynchrony between the components should degrade the perception of signal salience, reducing receiver response. Male túngara frogs, Physalaemus pustulosus, produce a fixed multisensory courtship signal by vocalizing with two call components (whines and chucks) and inflating a vocal sac (visual component). Using a robotic frog, we tested female responses to variation in the temporal arrangement between acoustic and visual components. When the visual component lagged a complex call (whine + chuck), females largely rejected this asynchronous multisensory signal in favor of the complex call absent the visual cue. When the chuck component was removed from one call, but the robofrog inflation lagged the complex call, females responded strongly to the asynchronous multimodal signal. When the chuck component was removed from both calls, females reversed preference and responded positively to the asynchronous multisensory signal. When the visual component preceded the call, females responded as often to the multimodal signal as to the call alone. These data show that asynchrony of a normally fixed signal does reduce receiver responsiveness. The magnitude and overall response, however, depend on specific temporal interactions between the acoustic and visual components. The sensitivity of túngara frogs to lagging visual cues, but not leading ones, and the influence of acoustic signal content on the perception of visual asynchrony is similar to those reported in human psychophysics literature. Virtually all acoustically communicating animals must conduct auditory scene analyses and identify the source of signals. Our data suggest that some basic

  9. WIENER-HOPF SOLVER WITH SMOOTH PROBABILITY DISTRIBUTIONS OF ITS COMPONENTS

    Directory of Open Access Journals (Sweden)

    Mr. Vladimir A. Smagin

    2016-12-01

    Full Text Available The Wiener – Hopf solver with smooth probability distributions of its component is presented. The method is based on hyper delta approximations of initial distributions. The use of Fourier series transformation and characteristic function allows working with the random variable method concentrated in transversal axis of absc.

  10. Anthropological Component of Descartes’ Ontology

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  11. ANTHROPOLOGICAL COMPONENT OF DESCARTES’ ONTOLOGY

    Directory of Open Access Journals (Sweden)

    Anatolii M. Malivskyi

    2014-06-01

    Full Text Available The purpose of the article is to outline and comprehend the Descartes’ theory about anthropological component of ontology as the most important part of his philosophy. The accomplishment of this purpose covers the successive solution of the following tasks: 1 review of the research literature concerning the problem of human’s presence and the individual nature of truth; 2 emphasize the ambivalence of the basic intention of his legacy; 3 justify the thesis about constitutivity of human’s presence and comprehend passions as the form of disclosure of ontology’s anthropological component. Methodology. The use of the euristic potential of phenomenology, postpositivism and postmodernism makes it possible to emphasize the multiple-layer and multiple-meaning classical philosophy works, to comprehend the limitation and scarcity of the naïve-enlightening vision of human nature and to look for a new reception of European classics that provides the overcoming of established nihilism and pessimism concerning the interpretation of human nature. Scientific novelty. It is the first time that anthropological component of Descartes’ ontology became an object of particular attention. It previously lacked attention because of following main reasons: 1 traditional underestimating of the fact of Descartes’ legacy incompleteness as an unrealized anthropological project and 2 lack of proper attention to the individual nature of truth. The premise for its constructive overcoming is the attention to ambivalence of the basic intention and the significance of ethics in the philosopher’s legacy. His texts and research literature allow confirming the constitutive nature of human’s presence and passions as the key form of disclosure of the ontology anthropological component. Conclusions. The established tradition of interpretation the Descartes’ philosophizing nature as the filiation process of impersonal knowledge loses its cogency these days. The

  12. Making the Most of the Operating Experience Feedback: Design of a Computerized Data Base Related to NPP Component Behavior

    International Nuclear Information System (INIS)

    Degrave, C.; Martin-Onraet, M.

    1998-01-01

    Electricite de France carries out several analyses on NPP component behavior every year. However, these analyses are conducted separately by specialists of only the kind of component and regardless of the time factor. Seven years ago, a working group from the Nuclear Operation Division completed a detailed examination of component behavior of the 50 NPP then in operation, over a ten-years period (from 1980 to 1990). These analyses have been centered on main components only. Today, another working group will integrate this operating experience in a computerized process to facilitate access to all the information contained in the data base. This system will be based on a site server allowing a user-friendly connection, and updated periodically. (author)

  13. Relationships between exercise and three components of mental well-being in corporate employees

    OpenAIRE

    Thøgersen-Ntoumani, Cecilie; Fox, Kenneth R; Ntoumanis, Nikos

    2005-01-01

    Objectives: The main purpose of the present study was to examine the relationships between exercise participation and three components of mental well-being (physical self, work-related, and global) in a sample of corporate employees. As a subsidiary and exploratory question, we also examined whether these well-being components are more strongly related to structured exercise participation scores compared to total levels of physical activity. Design: Cross-sectional survey. Me...

  14. Predictive based monitoring of nuclear plant component degradation using support vector regression

    International Nuclear Information System (INIS)

    Agarwal, Vivek; Alamaniotis, Miltiadis; Tsoukalas, Lefteri H.

    2015-01-01

    Nuclear power plants (NPPs) are large installations comprised of many active and passive assets. Degradation monitoring of all these assets is expensive (labor cost) and highly demanding task. In this paper a framework based on Support Vector Regression (SVR) for online surveillance of critical parameter degradation of NPP components is proposed. In this case, on time replacement or maintenance of components will prevent potential plant malfunctions, and reduce the overall operational cost. In the current work, we apply SVR equipped with a Gaussian kernel function to monitor components. Monitoring includes the one-step-ahead prediction of the component's respective operational quantity using the SVR model, while the SVR model is trained using a set of previous recorded degradation histories of similar components. Predictive capability of the model is evaluated upon arrival of a sensor measurement, which is compared to the component failure threshold. A maintenance decision is based on a fuzzy inference system that utilizes three parameters: (i) prediction evaluation in the previous steps, (ii) predicted value of the current step, (iii) and difference of current predicted value with components failure thresholds. The proposed framework will be tested on turbine blade degradation data.

  15. Thermo-characterization of power systems components: a tool to diagnose their malfunctions

    International Nuclear Information System (INIS)

    Zaleta-Aguilar, Alejandro; Royo, Javier; Rangel, Victor H.; Torres-Reyes, Ernestina

    2004-01-01

    Concepts on thermodynamic characterization of power system components are presented in this paper. The aim of this work is to evaluate and diagnose the actual operating condition for existing power plant components. What is more, a Reference Performance State (RPS) for power system components which uses the parameters defined as the enthalpy change, ω, the entropy change, σ and the Mass Flow Ratio design, MFR is put forward. Design information and simulation will help to determine the RPS for each component operating without any malfunction. The RPS can be used to compare, to evaluate and to diagnose the actual operating condition of the plant components so as to detect its possible malfunction. A simulated example of a 105 MW power plant is presented herein so that thermo-characterization of steam turbines, a condenser, a heat exchanger, and a pump is illustrated. The induced and intrinsic component malfunction effects on the RPS are also presented. Their effects are related to the RPS, thereby opening the possibility to apply methodologies to any internal decay and/or induced malfunctions that could appear in an operating component, in terms of the heat rate impact

  16. Computational needs for modelling accelerator components

    International Nuclear Information System (INIS)

    Hanerfeld, H.

    1985-06-01

    The particle-in-cell MASK is being used to model several different electron accelerator components. These studies are being used both to design new devices and to understand particle behavior within existing structures. Studies include the injector for the Stanford Linear Collider and the 50 megawatt klystron currently being built at SLAC. MASK is a 2D electromagnetic code which is being used by SLAC both on our own IBM 3081 and on the CRAY X-MP at the NMFECC. Our experience with running MASK illustrates the need for supercomputers to continue work of the kind described. 3 refs., 2 figs

  17. Snake venoms components with antitumor activity in murine melanoma cells

    International Nuclear Information System (INIS)

    Queiroz, Rodrigo Guimaraes

    2012-01-01

    Despite the constant advances in the treatment of cancer, this disease remains one of the main causes of mortality worldwide. So, the development of new treatment modalities is imperative. Snake venom causes a variety of biological effects because they constitute a complex mixture of substances as disintegrins, proteases (serine and metalo), phospholipases A2, L-amino acid oxidases and others. The goal of the present work is to evaluate a anti-tumor activity of some snake venoms fractions. There are several studies of components derived from snake venoms with this kind of activity. After fractionation of snake venoms of the families Viperidae and Elapidae, the fractions were assayed towards murine melanoma cell line B16-F10 and fibroblasts L929. The results showed that the fractions of venom of the snake Notechis ater niger had higher specificity and potential antitumor activity on B16-F10 cell line than the other studied venoms. Since the components of this venom are not explored yet coupled with the potential activity showed in this work, we decided to choose this venom to develop further studies. The cytotoxic fractions were evaluated to identify and characterize the components that showed antitumoral activity. Western blot assays and zymography suggests that these proteins do not belong to the class of metallo and serine proteinases. (author)

  18. Work-related limitations and return-to-work experiences in prolonged fatigue: workers' perspectives before and after vocational treatment

    NARCIS (Netherlands)

    Joosen, Margot C. W.; Frings-Dresen, Monique H. W.; Sluiter, Judith K.

    2011-01-01

    To gain insight into fatigued workers' perspectives regarding work experience before and after receiving vocational rehabilitation (VR) treatments. A qualitative survey was conducted using semi-structured interviews with 21 fatigued workers who attended an outpatient multi-component VR treatment.

  19. An exploratory study of the Work Ability Index (WAI) and its components in a group of computer workers.

    Science.gov (United States)

    Costa, Ana Filipa; Puga-Leal, Rogério; Nunes, Isabel L

    2011-01-01

    The objective of this paper is to present a study on the assessment of the work ability of a group of aged computers workers. The study was developed with the goal of creating a decision making framework oriented towards the maintenance of the health and working ability of aged workers. Fifty computer workers participated in this study. They were administrative secretaries and computer technicians working mainly with office computers. The method used to assess the work ability was the Work Ability Index (WAI). 78% of the participants had good or excellent work ability and only 2% a poor one. The average WAI score was 40.5 (SD=5.761; min=27; max=49). This study confirms the decrease in work ability of workers while aging. The group overall work ability was slightly higher than the reference values develop by the Finnish Institute of Occupational Health. The assessment of work ability is fundamental to make age-friendly workplaces. WAI is one tool designed to perform such assessment. The results obtained could assist the early identification of situations where employees are struggling with their work ability, thus helping to prioritize ergonomic interventions devoted to improve the working conditions, and allowing the continued employment of aging workers on their current job.

  20. Generic component reliability data for research reactors PSA. Final report of the CRP on data acquisition for research reactor PSA. Working material

    International Nuclear Information System (INIS)

    1993-01-01

    The scope of this document is to provide the final reference generic component reliability database information for a variety of research reactor types. As noted in Section 2.1 and Table 3a, many years of component data are represented in the database so that it is expected that the report should provide representative data valid for a number of years. The database provides component failure rates on a time and/or a demand related basis according to the operational modes of the components. At the current time an update of the database is not planned. As a result of the implementation of data collection systems in the research reactors represented in these studies, updating of data from individual facilities could be made available from the contributing research reactor facilities themselves. As noted in Section 1.2, the report does not include detailed discussion of information regarding component classification and reliability parameter definitions. The report does provide some insights and discussion regarding the practicalities of the data collection process and some guidelines for database usage. 9 refs, tabs

  1. Generic component reliability data for research reactors PSA. Final report of the CRP on data acquisition for research reactor PSA. Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The scope of this document is to provide the final reference generic component reliability database information for a variety of research reactor types. As noted in Section 2.1 and Table 3a, many years of component data are represented in the database so that it is expected that the report should provide representative data valid for a number of years. The database provides component failure rates on a time and/or a demand related basis according to the operational modes of the components. At the current time an update of the database is not planned. As a result of the implementation of data collection systems in the research reactors represented in these studies, updating of data from individual facilities could be made available from the contributing research reactor facilities themselves. As noted in Section 1.2, the report does not include detailed discussion of information regarding component classification and reliability parameter definitions. The report does provide some insights and discussion regarding the practicalities of the data collection process and some guidelines for database usage. 9 refs, tabs.

  2. The interference of flexible working times with the utility of time: a predictor of social impairment?

    Science.gov (United States)

    Wirtz, Anna; Giebel, Ole; Schomann, Carsten; Nachreiner, Friedhelm

    2008-04-01

    Periodic components inherent in actual schedules of flexible working hours and their interference with social rhythms were measured using spectrum analysis. The resulting indicators of periodicity and interference were then related to the reported social impairments of workers. The results show that a suppression of the 24 and the 168 h (seven-day) components (absence of periodicity) in the work schedules predicts reported social impairment. However, even if there are relatively strong 24 and 168 h components left in the work schedules, their interference with the social rhythm (using the phase difference between working hours and the utility of time) further predicts impairment. The results thus indicate that the periodicity of working hours and the amount of (social) desynchronization induced by flexible work schedules can be used both for predicting the impairing effects of the specific work schedules on social well-being as well as for the design of socially acceptable flexible work hours.

  3. Racetrack resonator as a loss measurement platform for photonic components.

    Science.gov (United States)

    Jones, Adam M; DeRose, Christopher T; Lentine, Anthony L; Starbuck, Andrew; Pomerene, Andrew T S; Norwood, Robert A

    2015-11-02

    This work represents the first complete analysis of the use of a racetrack resonator to measure the insertion loss of efficient, compact photonic components. Beginning with an in-depth analysis of potential error sources and a discussion of the calibration procedure, the technique is used to estimate the insertion loss of waveguide width tapers of varying geometry with a resulting 95% confidence interval of 0.007 dB. The work concludes with a performance comparison of the analyzed tapers with results presented for four taper profiles and three taper lengths.

  4. Long life technology work at Rockwell International Space Division

    Science.gov (United States)

    Huzel, D. K.

    1974-01-01

    This paper presents highlights of long-life technology oriented work performed at the Space Division of Rockwell International Corporation under contract to NASA. This effort included evaluation of Saturn V launch vehicle mechanical and electromechanical components for potential extended life capabilities, endurance tests, and accelerated aging experiments. A major aspect was evaluation of the components at the subassembly level (i.e., at the interface between moving surfaces) through in-depth wear analyses and assessments. Although some of this work is still in progress, preliminary conclusions are drawn and presented, together with the rationale for each. The paper concludes with a summary of the effort still remaining.

  5. Work on the ATLAS semiconductor tracker barrel

    CERN Multimedia

    Maximilien Brice

    2005-01-01

    Precision work is performed on the semiconductor tracker barrel of the ATLAS experiment. All work on these delicate components must be performed in a clean room so that impurities in the air, such as dust, do not contaminate the detector. The semiconductor tracker will be mounted in the barrel close to the heart of the ATLAS experiment to detect the path of particles produced in proton-proton collisions.

  6. Effects of Career Choice Intervention on Components of Career Preparation

    Science.gov (United States)

    Koivisto, Petri; Vinokur, Amiram D.; Vuori, Jukka

    2011-01-01

    This randomized experimental study (N = 1,034) examines both the direct and the indirect effects of the Towards Working Life intervention on 2 components of adolescents' career preparation: preparedness for career choice and attitude toward career planning. The intervention comprised a 1-week workshop program, the proximal goals of which were to…

  7. Creating and Sustaining an Experiential Learning Component on Aging in a BSW Course

    Directory of Open Access Journals (Sweden)

    Jimmy A. Young

    2016-11-01

    Full Text Available Regardless of their particular field of practice, social workers increasingly serve the growing population of older adults in the United States. This article describes the process of integrating an experiential component into a Baccalaureate Social Work (BSW course involving 75 BSW students. Reflections on the strengths and challenges during 3 years of the course and a successful sustainability strategy are discussed. Three methods of curriculum infusion were added to a required course: (a guest speakers, (b required volunteer hours, and (c written reflections and class presentations. We discovered that students’ attitudes toward working with older adults were changed following their experience in this course. Cognizant of the difficulty introducing additional hours and content to a full course agenda, we advocate for curriculum change that includes an experiential component together with classroom discussion and activities. We provide details of our process of implementation and sustainability that might help guide similar course adaptations to increase BSW student exposure to working with older adults.

  8. Component design considerations for gas turbine HTGR waste-heat power plant

    International Nuclear Information System (INIS)

    McDonald, C.F.; Vrable, D.L.

    1976-01-01

    Component design considerations are described for the ammonia waste-heat power conversion system of a large helium gas-turbine nuclear power plant under development by General Atomic Company. Initial component design work was done for a reference plant with a 3000-MW(t) High-Temperature Gas-Cooled Reactor (HTGR), and this is discussed. Advanced designs now being evaluated include higher core outlet temperature, higher peak system pressures, improved loop configurations, and twin 4000-MW(t) reactor units. Presented are the design considerations of the major components (turbine, condenser, heat input exchanger, and pump) for a supercritical ammonia Rankine waste heat power plant. The combined cycle (nuclear gas turbine and waste-heated plant) has a projected net plant efficiency of over 50 percent. While specifically directed towards a nuclear closed-cycle helium gas-turbine power plant (GT-HTGR), it is postulated that the bottoming waste-heat cycle component design considerations presented could apply to other low-grade-temperature power conversion systems such as geothermal plants

  9. Creep crack growth verification testing in alloy 800H tubular components

    International Nuclear Information System (INIS)

    Hunter, C.P.; Hurst, R.C.

    1992-01-01

    A method for determining the creep crack growth, CCG, and stress rupture behaviour of Alloy 800H tubular components containing longitudinal notches at 800deg C is described. The presence of the notch is found to systematically weaken the tube, the degree of weaking dependent upon the notch length and depth. The creep crack growth rates, determined from a specially adapted potential drop technique are compared with those obtained from conventional compact tension type specimens. Using the stress intensity factor, K 1 , and the C * parameter as the basis of comparison it is found that the latter gives excellent correlation between the specimen and component behaviour. Finally attention is drawn to the potential dangers of predicting the component creep crack growth behaviour from the data obtained using conventional specimens for a structure sensitive material such as Alloy 800H and conversely to the advantages of the component type CCG tests developed in the present work. (orig.)

  10. Outbursts from the secondary component in OJ 287 and the secondary spin-up

    Directory of Open Access Journals (Sweden)

    Pihajoki P.

    2012-12-01

    Full Text Available At the end of March 2012 a prominent optical outburst was observed in the binary black hole system OJ 287. It does not fit the expected sequence of outbursts from the primary component and the bremsstrahlung outbursts from the accretion disk impacts of the secondary component. These occur in a well established pattern repeated with an approximately 12 year interval. In this work we discuss the possibility that the outburst originates from the secondary black hole. The timing of the 2012 outburst relative to the expected sequence would make it a counterpart of the precursor outbursts in 1993 and 2004, which occured before the main pattern of outbursts. If so, it appears that a precursor occurs when the secondary reaches a constant level above the mean accretion disk level of the primary component. It may be that this encounter induces an outburst in the secondary which is nearly as prominent as the outbursts in the expected sequence. The strength of these outbursts depends strongly on the spin of the secondary. In this work we investigate the limits on the secondary spin-up and spin alignment from interaction with the accretion disk of the primary component and its magnetic field.

  11. Tried And True Integrating Active And Reserve Components

    Science.gov (United States)

    2016-02-16

    from home station to work and train with experienced maintainers in the Reserve Component. Since there are no dorms or dining facilities, young... smart and experienced leadership out given limited progression. In a new test of the Integrated Wing, the Air Force proposes restructuring the Active...degree or for shorter term family reasons (i.e. to care for an elderly parent or child). I believe it will benefit only a small percentage of Airmen who

  12. Does Contralateral Delay Activity Reflect Working Memory Storage or the Current Focus of Spatial Attention within Visual Working Memory?

    Science.gov (United States)

    Berggren, Nick; Eimer, Martin

    2016-12-01

    During the retention of visual information in working memory, event-related brain potentials show a sustained negativity over posterior visual regions contralateral to the side where memorized stimuli were presented. This contralateral delay activity (CDA) is generally believed to be a neural marker of working memory storage. In two experiments, we contrasted this storage account of the CDA with the alternative hypothesis that the CDA reflects the current focus of spatial attention on a subset of memorized items set up during the most recent encoding episode. We employed a sequential loading procedure where participants memorized four task-relevant items that were presented in two successive memory displays (M1 and M2). In both experiments, CDA components were initially elicited contralateral to task-relevant items in M1. Critically, the CDA switched polarity when M2 displays appeared on the opposite side. In line with the attentional activation account, these reversed CDA components exclusively reflected the number of items that were encoded from M2 displays, irrespective of how many M1 items were already held in working memory. On trials where M1 and M2 displays were presented on the same side and on trials where M2 displays appeared nonlaterally, CDA components elicited in the interval after M2 remained sensitive to a residual trace of M1 items, indicating that some activation of previously stored items was maintained across encoding episodes. These results challenge the hypothesis that CDA amplitudes directly reflect the total number of stored objects and suggest that the CDA is primarily sensitive to the activation of a subset of working memory representations within the current focus of spatial attention.

  13. Multi-component fiber track modelling of diffusion-weighted magnetic resonance imaging data

    Directory of Open Access Journals (Sweden)

    Yasser M. Kadah

    2010-01-01

    Full Text Available In conventional diffusion tensor imaging (DTI based on magnetic resonance data, each voxel is assumed to contain a single component having diffusion properties that can be fully represented by a single tensor. Even though this assumption can be valid in some cases, the general case involves the mixing of components, resulting in significant deviation from the single tensor model. Hence, a strategy that allows the decomposition of data based on a mixture model has the potential of enhancing the diagnostic value of DTI. This project aims to work towards the development and experimental verification of a robust method for solving the problem of multi-component modelling of diffusion tensor imaging data. The new method demonstrates significant error reduction from the single-component model while maintaining practicality for clinical applications, obtaining more accurate Fiber tracking results.

  14. Recycling Flight Hardware Components and Systems to Reduce Next Generation Research Costs

    Science.gov (United States)

    Turner, Wlat

    2011-01-01

    With the recent 'new direction' put forth by President Obama identifying NASA's new focus in research rather than continuing on a path to return to the Moon and Mars, the focus of work at Kennedy Space Center (KSC) may be changing dramatically. Research opportunities within the micro-gravity community potentially stands at the threshold of resurgence when the new direction of the agency takes hold for the next generation of experimenters. This presentation defines a strategy for recycling flight experiment components or part numbers, in order to reduce research project costs, not just in component selection and fabrication, but in expediting qualification of hardware for flight. A key component of the strategy is effective communication of relevant flight hardware information and available flight hardware components to researchers, with the goal of 'short circuiting' the design process for flight experiments

  15. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, Michael V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations

  16. Radiation Sources Working Group Summary Report

    International Nuclear Information System (INIS)

    Fazio, M.V.

    1999-01-01

    The Radiation Sources Working Group addressed advanced concepts for the generation of RF energy to power advanced accelerators. The focus of the working group included advanced sources and technologies above 17 GHz. The topics discussed included RF sources above 17 GHz, pulse compression techniques to achieve extreme peak power levels, component technology, technology limitations and physical limits, and other advanced concepts. RF sources included gyroklystrons, magnicons, free-electron masers, two beam accelerators, and gyroharmonic and traveling wave devices. Technology components discussed included advanced cathodes and electron guns, high temperature superconductors for producing magnetic fields, RF breakdown physics and mitigarion, and phenomena that impact source design such as fatigue in resonant structures due to pulsed RF heating. New approaches for RF source diagnostics located internal to the source were discussed for detecting plasma and beam phenomena existing in high energy density electrodynamic systems in order to help elucidate the reasons for performance limitations. copyright 1999 American Institute of Physics

  17. INDICATORS AND DIAGNOSTICS OF INDEPENDENT WORK CULTURE FORMATION IN FUTURE MATHEMATICS TEACHERS

    Directory of Open Access Journals (Sweden)

    Олена Соя

    2015-09-01

    Full Text Available The article highlights the results of research of formation the culture of independent work of future mathematics teachers, indicating the effectiveness of selected theoretically grounded and practically implemented pedagogical conditions of its formation. Its semantic components that are interconnected and interdependent unity of cognitive, procedural, technological and motivational components were singled out on the basis of definition of independent work culture of future mathematics teachers. The system of indicators, which assessed the degree of mastering by students the culture of independent work by value-orientation, content-effective, reflective, constructive and operationally-activity criteria is reviewed.

  18. Developing standard performance testing procedures for MC and A components at a site

    International Nuclear Information System (INIS)

    Scherer, Carolynn

    2010-01-01

    The condition of a nuclear material control and accountability system (MC and A) and its individual components, as with any system combining technical elements, documentation and the human factor, may be characterized through an aggregate of values for the various parameters that determine the system's ability to perform. The MC and A system's status may be functioning effectively, marginally or not functioning based on a summary of the values of the individual parameters. This work included a review of the following elements and subsystems or components for a material control and accountability system: (1) MC and A Elements: Information subsystem, Measurement subsystem, NM access subsystem, including a tamper-indicating device (TID) program, and Automated information-gathering subsystem; and (2) Detecting NM Loses Elements: Inventory differences, Shipper/receiver differences, Confirmatory measurements and differences with accounting data, and TID or seal violations. In order to detect the absence or loss of nuclear material there must be appropriate interactions among the elements and their respective subsystems (from the list above). Additionally this work includes a review of the status of regulatory requirements for the MC and A system components and potential criteria that support the evaluation of the performance of the listed components. The listed components had performance testing algorithms and procedures developed that took into consideration the regulatory criteria. The developed MC and A performance-testing procedures were the basis for a pilot Guide for MC and A Performance Testing at the MBAs of SSC RF IPPE.

  19. Hydrodynamics and heat transfer in reactor components cooled by liquid metal coolants in single/two phase. 11. meeting of the International Association for Hydraulic Research (IAHR) Working Group. Working material

    International Nuclear Information System (INIS)

    2005-01-01

    This Working Material includes the papers presented at the International Meeting 'Hydrodynamics and heat transfer in reactor components cooled by liquid metal coolants in single/two-phase', which was held 5-9 July 2004 at the State Scientific Center of Russian Federation - Institute for Physics and Power Engineering named after A.I. Leypunsky, in Obninsk near Moscow. The objectives of the meeting were to discuss new results obtained in the field of liquid metal coolant and to recommend the lines of further general physics and applied investigations, with the purpose of validating existing and codes under development for liquid metal cooled advanced and new generation nuclear reactors. Most of the contributions present results of experimental and numerical investigations into velocity, temperature and heat transfer in fuel subassemblies of fast reactors cooled by sodium or lead. In the frame of the meeting a benchmark problem devoted to heat transfer in the model subassembly of the fast reactor BREST-OD-300 was proposed. Experts from 5 countries (Japan, Netherlands, Spain, Republic of Korea, and Russia) took part in this benchmark exercise. The results of the benchmark calculations are summarized in the Working Material. The results of hydrodynamic studies of pressure head chambers and collector systems of liquid metal cooled reactors are presented in a number of papers. Also attention was given to the generalization of experimental data on hydraulic losses in the pipelines in case of mutual influence of local pressure drops, and to the modeling of natural convection in the fuel subassemblies and circuits with liquid metal cooling. Special emphasis at the meeting was placed on thermal hydraulics issues related to the development and design of target systems, such as heat removal in the target unit of the cascade subcritical reactor cooled by liquid salt; the target complex MK-1 for accelerator driven systems cooled by eutectic lead-bismuth alloy; and the test

  20. Hydrodynamics and heat transfer in reactor components cooled by liquid metal coolants in single/two phase. 11. meeting of the International Association for Hydraulic Research (IAHR) Working Group. Working material

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This Working Material includes the papers presented at the International Meeting 'Hydrodynamics and heat transfer in reactor components cooled by liquid metal coolants in single/two-phase', which was held 5-9 July 2004 at the State Scientific Center of Russian Federation - Institute for Physics and Power Engineering named after A.I. Leypunsky, in Obninsk near Moscow. The objectives of the meeting were to discuss new results obtained in the field of liquid metal coolant and to recommend the lines of further general physics and applied investigations, with the purpose of validating existing and codes under development for liquid metal cooled advanced and new generation nuclear reactors. Most of the contributions present results of experimental and numerical investigations into velocity, temperature and heat transfer in fuel subassemblies of fast reactors cooled by sodium or lead. In the frame of the meeting a benchmark problem devoted to heat transfer in the model subassembly of the fast reactor BREST-OD-300 was proposed. Experts from 5 countries (Japan, Netherlands, Spain, Republic of Korea, and Russia) took part in this benchmark exercise. The results of the benchmark calculations are summarized in the Working Material. The results of hydrodynamic studies of pressure head chambers and collector systems of liquid metal cooled reactors are presented in a number of papers. Also attention was given to the generalization of experimental data on hydraulic losses in the pipelines in case of mutual influence of local pressure drops, and to the modeling of natural convection in the fuel subassemblies and circuits with liquid metal cooling. Special emphasis at the meeting was placed on thermal hydraulics issues related to the development and design of target systems, such as heat removal in the target unit of the cascade subcritical reactor cooled by liquid salt; the target complex MK-1 for accelerator driven systems cooled by eutectic lead-bismuth alloy; and the test

  1. Diamond Turning Of Infra-Red Components

    Science.gov (United States)

    Hodgson, B.; Lettington, A. H.; Stillwell, P. F. T. C.

    1986-05-01

    Single point diamond machining of infra-red optical components such as aluminium mirrors, germanium lenses and zinc sulphide domes is potentially the most cost effective method for their manufacture since components may be machined from the blanks to a high surface finish, requiring no subsequent polishing, in a few minutes. Machines for the production of flat surfaces are well established. Diamond turning lathes for curved surfaces however require a high capital investment which can be justified only for research purposes or high volume production. The present paper describes the development of a low cost production machine based on a Bryant Symons diamond turning lathe which is able to machine spherical components to the required form and finish. It employs two horizontal spindles one for the workpiece the other for the tool. The machined radius of curvature is set by the alignment of the axes and the radius of the tool motion, as in conventional generation. The diamond tool is always normal to the workpiece and does not need to be accurately profiled. There are two variants of this basic machine. For machining hemispherical domes the axes are at right angles while for lenses with positive or negative curvature these axes are adjustable. An aspherical machine is under development, based on the all mechanical spherical machine, but in which a ± 2 mm aspherecity may be imposed on the best fit sphere by moving the work spindle under numerical control.

  2. On Using Ilities of Non-Functional Properties for Subsystems and Components

    Directory of Open Access Journals (Sweden)

    James Y. Lee

    2017-07-01

    Full Text Available The use of ilities for systems engineering of subsystems and components is investigated. Prior work on ilities has emphasized or restricted their application to system level, non-functional properties. The premise of this work is that ilities can be applied with benefit, and in some cases out of necessity, to lower levels of systems as well. The veracity of this premise is established by providing examples that demonstrate how some ilities are passed and used as a non-functional property of electrical and structural subsystems in aircraft. It is further demonstrated that flowing ilities down to the subsystem level is not only a useful practice for systems engineers, it can also be an essential step to ensure that customer needs are actually met by the system under design or service. Systems engineers often lack the detailed knowledge of the subsystems or components required to translate ilities into functional requirements. Thus, the system ilities are passed down and translated from non-functional to functional requirements by subject matter experts. We first discuss the definition, characteristics and scope of ilities. Then, we formulate the application of ilities at a subsystem level. Next, we show aircraft engineering examples for ilities applications. The application process is formalized with diagrams, and ilities’ relation to system architecture engineering is discussed. The work concludes with a summary and suggestions for future work.

  3. Aging effects in PWR power plants components

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Diogo da S.; Guimaraes, Antonio C.F.; Moreira, Maria de Lourdes, E-mail: diogosb@outlook.com, E-mail: tony@ien.gov.br, E-mail: malu@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    This paper presents a contribution to the study of aging process of components in commercial plants of Pressurized Water Reactors (PWRs). The analysis is made through application of the Fault Trees Method, Monte Carlo Method and Fussell-Vesely Importance Measure. The approach of the study of aging in nuclear power plants, besides giving attention to the economic factors involved directly with the extent of their operational life, also provide significant data on security issues. The latest case involving process of life extension of a PWR could be seen in Angra 1 Nuclear Power Plant through investing of $27 million for the installation of a new reactor lid. The corrective action has generated an estimated operating life extension of Angra I in twenty years, offering great economy compared with building cost of a new plant and anterior decommissioning, if it had reached the time operating limit of forty years. The Extension of the operating life of a nuclear power plant must be accompanied by a special attention to the components of the systems and their aging process. After the application of the methodology (aging analysis of the injection system of the containment spray) proposed in this work, it can be seen that 'the increase in the rate of component failure, due the aging process, generates the increase in the general unavailability of the system that containing these basic components'. The final results obtained were as expected and may contribute to the maintenance policy, preventing premature aging process in Nuclear Plant Systems. (author)

  4. Verbal fluency in children with intellectual disability: Influence of basic executive components

    Directory of Open Access Journals (Sweden)

    Gligorović Milica

    2014-01-01

    Full Text Available Phonemic and semantic fluency tasks are frequently used to differentiate executive control roles and the integrity of lexical-semantic representation. The main goal of this study is to determine the influence of basic executive components on phonemic and semantic productivity in children with mild intellectual disability. The sample consisted of 95 children with unspecified mild intellectual disability (MID, ages 10-13.11. Phonemic fluency was assessed by the Controlled Oral Word Association Test (COWAT, while semantic fluency was assessed by the Category Naming Test (CNT. Cognitive flexibility was assessed by Wisconsin Card Sorting Test (WCST and Trail Making Test (TMT. Number Manipulation Task (NMT was used for the verbal working memory assessment, while Day/Night Stroop Task was used for the assessment of inhibitory control. The results analysis showed that all of the assessed EF components significantly affect phonemic productivity. Semantic productivity significantly depends on WCST and TMT performance. Verbal working memory and inhibitory control do not significantly contribute to semantic productivity. The results of our study indicate that the discrepancy between phonemic and semantic productivity in children with MID could be directly associated with the basic executive functions components.

  5. Control Systems of Rubber Dryer Machinery Components Using Programmable Logic Control (PLC)

    Science.gov (United States)

    Hendra; Yulianto, A. S.; Indriani, A.; Hernadewita; Hermiyetti

    2018-02-01

    Application of programmable logic control (PLC) is widely used on the control systems in the many field engineering such as automotive, aviation, food processing and other industries [1-2]. PLC is simply program to control many automatic activity, easy to use, flexible and others. PLC using the ladder program to solve and regulated the control system component. In previous research, PLC was used for control system of rotary dryer machine. In this paper PLC are used for control system of motion component in the rubber dryer machinery. Component of rubber dryer machine is motors, gearbox, sprocket, heater, drying chamber and bearing. Principle working of rubber dryer machinery is wet rubber moving into the drying chamber by sprocket. Sprocket is driven by motors that conducted by PLC to moving and set of wet rubber on the drying chamber. Drying system uses greenhouse effect by making hanger dryer design in the form of line path. In this paper focused on motion control system motors and sensors drying rubber using PLC. The results show that control system of rubber dryer machinery can work in accordance control input and the time required to dry the rubber.

  6. A conceptual design of main components sizing for UMT PHEV powertrain

    Science.gov (United States)

    Haezah, M. N.; Norbakyah, J. S.; Atiq, W. H.; Salisa, A. R.

    2015-12-01

    This paper presents a conceptual design of main components sizing for Universiti Malaysia Terengganu plug-in hybrid electric vehicle (UMT PHEV) powertrain. In the design of hybrid vehicles, it is important to identify a proper component sizes. Component sizing significantly affects vehicle performance, fuel economy and emissions. The proposed UMT PHEV has only one electric machine (EM) which functions as either a motor or generator at a time and using batteries and ultracapacitors as an energy storage system (ESS). In this work, firstly, energy and power requirements based on parameters, specifications and performance requirements of vehicle are calculated. Then, the parameters for internal combustion engine, EM and ESS are selected based on the developed Kuala Terengganu drive cycle. The results obtained from this analysis are within reasonable range and satisfactory.

  7. Quartz fast component opticallystimulated luminescence: Towards routine extraction for dating applications

    International Nuclear Information System (INIS)

    Shen, Zhixiong; Lang, Andreas

    2016-01-01

    Using an uncontaminated fast component is a key for improving the reliability of quartz OSL dating for many deposits. So far no approach to extract the fast component of quartz OSL has routinely been adopted for dating practice. Key challenges for extracting fast components are (1) the difficulty of finding a unique solution in curve-fitting deconvolution of OSL decay curves and (2) the relatively poor dating precision when using experimental fast component extraction. Here, a simple mathematic solution for fast component extraction is presented that is not relying on curve-fitting deconvolution and can easily be adopted into routine dating practices. By using specifically selected data points from smoothed OSL decay curves, the precision of equivalent doses calculated using the extracted fast component can be improved over equivalent doses calculated using bulk OSL. The fast component extraction is tested on a group of age-constrained samples containing both insufficiently bleached and sufficiently bleached deposits. Fast component OSL ages are as accurate as bulk OSL ages for the sufficiently bleached deposits, but more accurate for samples where bulk OSL is affected by insufficient bleaching. We also demonstrate how using a curve smoothing procedure can improve dating precision in case of both sufficiently and insufficiently bleached deposits. - Highlights: • A simple mathematical method to extract quartz OSL fast component is presented. • The method can be adopted in D_e calculation programs for routine extraction. • The method leads to an increase in accuracy and precision of D_e. • The method works for relatively dim samples with low signal-to-noise ratios.

  8. Clinician Perceptions of the Importance of Hospital Discharge Components for Children.

    Science.gov (United States)

    Blaine, Kevin; Rogers, Jayne; OʼNeill, Margaret R; McBride, Sarah; Faerber, Jennifer; Feudtner, Chris; Berry, Jay G

    Discharging hospitalized children involves several different components, but their relative value is unknown. We assessed which discharge components are perceived as most and least important by clinicians. March and June of 2014, we conducted an online discrete choice experiment (DCE) among national societies representing 704 nursing, physician, case management, and social work professionals from 46 states. The DCE consisted of 14 discharge care components randomly presented two at a time for a total of 28 choice tasks. Best-worst scaling of participants' choices generated mean relative importance (RI) scores for each component, which allowed for ranking from least to most important. Participants, regardless of field or practice setting, perceived "Discharge Education/Teach-Back" (RI 11.1 [95% confidence interval, CI: 11.0-11.3]) and "Involve the Child's Care Team" (RI 10.6 [95% CI: 10.4-10.8]) as the most important discharge components, and "Information Reconciliation" (RI 4.1 [95% CI: 3.9-4.4]) and "Assigning Roles/Responsibilities of Discharge Care" (RI 2.8 [95% CI: 2.6-3.0]) as least important. A diverse group of pediatric clinicians value certain components of the pediatric discharge care process much more than others. Efforts to optimize the quality of hospital discharge for children should consider these findings.

  9. [South Carolina School-to-Work Brochures.

    Science.gov (United States)

    Partnership for Academic and Career Education, Pendleton, SC.

    This packet includes three pamphlets from the South Carolina School-to-Work Initiative, which involves many components in ensuring for students high levels of academic and technical achievement; strong problem-solving, teamwork and technology skills; clear career goals; better access to postsecondary education and meaningful employment; and a…

  10. Modularity, Working Memory and Language Acquisition

    Science.gov (United States)

    Baddeley, Alan D.

    2017-01-01

    The concept of modularity is used to contrast the approach to working memory proposed by Truscott with the Baddeley and Hitch multicomponent model. This proposes four sub components comprising the "central executive," an executive control system of limited attentional capacity that utilises storage based on separate but interlinked…

  11. Maximizing Success by Work Setting Diagnosis.

    Science.gov (United States)

    Sturner, William F.

    1990-01-01

    This article confronts the tension between creative expression and organizational realities in the workplace. It offers tips on diagnosing such components of the work setting as personal potential and ambition, supervisors' roles, colleagues' roles, organizational culture, and other variables that may influence the success of one's innovations in…

  12. New insights in the role of working memory in carry and borrow operations

    Directory of Open Access Journals (Sweden)

    Ineke Imbo

    2005-06-01

    Full Text Available The present paper provides a state-of-the-art overview concerning the role of working memory in carry and borrow operations in mental arithmetic. The role of the executive working-memory component is discussed, alongside the contribution of the phonological and visuo-spatial working-memory components. Moreover, a broad view on various carry characteristics (such as the number of carry/borrow operations and the value of the carry and various operations (addition, subtraction, and multiplication is provided. Finally, some ideas for further research are offered.

  13. Reliability for systems of degrading components with distinct component shock sets

    International Nuclear Information System (INIS)

    Song, Sanling; Coit, David W.; Feng, Qianmei

    2014-01-01

    This paper studies reliability for multi-component systems subject to dependent competing risks of degradation wear and random shocks, with distinct shock sets. In practice, many systems are exposed to distinct and different types of shocks that can be categorized according to their sizes, function, affected components, etc. Previous research primarily focuses on simple systems with independent failure processes, systems with independent component time-to-failure, or components that share the same shock set or type of shocks. In our new model, we classify random shocks into different sets based on their sizes or function. Shocks with specific sizes or function can selectively affect one or more components in the system but not necessarily all components. Additionally the shocks from the different shock sets can arrive at different rates and have different relative magnitudes. Preventive maintenance (PM) optimization is conducted for the system with different component shock sets. Decision variables for two different maintenance scheduling problems, the PM replacement time interval, and the PM inspection time interval, are determined by minimizing a defined system cost rate. Sensitivity analysis is performed to provide insight into the behavior of the proposed maintenance policies. These models can be applied directly or customized for many complex systems that experience dependent competing failure processes with different component shock sets. A MEMS (Micro-electro mechanical systems) oscillator is a typical system subject to dependent and competing failure processes, and it is used as a numerical example to illustrate our new reliability and maintenance models

  14. Perception of orchestral musicians about work environment and conditions

    OpenAIRE

    Clarissa Stefani Teixeira; Fausto Kothe; Luis Felipe Dias Lopes; Érico Felden Pereira

    2014-01-01

    The objective of this study was to investigate the perception of 11 orchestral string (viola and violin) musicians of both genders with respect to their work environment and conditions. We applied a questionnaire with demographic information and the scale Profile of Work Environment and Working Conditions by Nahas et al. (2009), which analyzes the following components: physical environment, social environment, development and professional achievement, salary and benefits, and social relev...

  15. Understanding recovery: changes in the relationships of the International Classification of Functioning (ICF) components over time.

    Science.gov (United States)

    Davis, A M; Perruccio, A V; Ibrahim, S; Hogg-Johnson, S; Wong, R; Badley, E M

    2012-12-01

    The International Classification of Functioning, Disability and Health framework describes human functioning through body structure and function, activity and participation in the context of a person's social and physical environment. This work tested the temporal relationships of these components. Our hypotheses were: 1) there would be associations among physical impairment, activity limitations and participation restrictions within time; 2) prior status of a component would be associated with future status; 3) prior status of one component would influence status of a second component (e.g. prior activity limitations would be associated with current participation restrictions); and, 4) the magnitude of the within time relationships of the components would vary over time. Participants from Canada with primary hip or knee joint replacement (n = 931), an intervention with predictable improvement in pain and disability, completed standardized outcome measures pre-surgery and five times in the first year post-surgery. These included physical impairment (pain), activity limitations and participation restrictions. ICF component relationships were evaluated cross-sectionally and longitudinally using path analysis adjusting for age, sex, BMI, hip vs. knee, low back pain and mood. All component scores improved significantly over time. The path coefficients supported the hypotheses in that both within and across time, physical impairment was associated with activity limitation and activity limitation was associated with participation restriction; prior status and change in a component were associated with current status in another component; and, the magnitude of the path coefficients varied over time with stronger associations among components to three months post surgery than later in recovery with the exception of the association between impairment and participation restrictions which was of similar magnitude at all times. This work enhances understanding of the

  16. Reliability Analysis of Load-Sharing K-out-of-N System Considering Component Degradation

    Directory of Open Access Journals (Sweden)

    Chunbo Yang

    2015-01-01

    Full Text Available The K-out-of-N configuration is a typical form of redundancy techniques to improve system reliability, where at least K-out-of-N components must work for successful operation of system. When the components are degraded, more components are needed to meet the system requirement, which means that the value of K has to increase. The current reliability analysis methods overestimate the reliability, because using constant K ignores the degradation effect. In a load-sharing system with degrading components, the workload shared on each surviving component will increase after a random component failure, resulting in higher failure rate and increased performance degradation rate. This paper proposes a method combining a tampered failure rate model with a performance degradation model to analyze the reliability of load-sharing K-out-of-N system with degrading components. The proposed method considers the value of K as a variable which is derived by the performance degradation model. Also, the load-sharing effect is evaluated by the tampered failure rate model. Monte-Carlo simulation procedure is used to estimate the discrete probability distribution of K. The case of a solar panel is studied in this paper, and the result shows that the reliability considering component degradation is less than that ignoring component degradation.

  17. Advanced inspection and repair techniques for primary side components

    International Nuclear Information System (INIS)

    Elm, Ralph

    1998-01-01

    The availability of nuclear power plant mainly depends on the components of the Nuclear Steam Supply System (NSSS) such as reactor pressure vessel, core internals and steam generators. The last decade has been characterized by intensive inspection and repair work on PWR steam generators. In the future, it can be expected, that the inspection of the reactor pressure vessel and the inspection and repair of its internals, in both PWR and BWR will be one of the challenges for the nuclear community. Due to this challenge, new, advanced inspection and repair techniques for the vital primary side components have been developed and applied, taking into account such issues as: use of reliable and fast inspection methods, repair of affected components instead of costly replacement, reduction of outage time compared to conventional methods, minimized radiation exposure, acceptable costs. This paper reflects on advanced inspection and repair techniques such as: Baffle Former Bolt inspection and replacement, Barrel Former Bolt inspection and replacement, Mechanized UT and visual inspection of reactor pressure vessels, Steam Generator repair by advanced sleeving technology. The techniques described have been successfully applied in nuclear power plants and improved the operation performance of the components and the NPP. (author). 6 figs

  18. Reconfigurable assembly work station

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Yhu-Tin; Abell, Jeffrey A.; Spicer, John Patrick

    2017-11-14

    A reconfigurable autonomous workstation includes a multi-faced superstructure including a horizontally-arranged frame section supported on a plurality of posts. The posts form a plurality of vertical faces arranged between adjacent pairs of the posts, the faces including first and second faces and a power distribution and position reference face. A controllable robotic arm suspends from the rectangular frame section, and a work table fixedly couples to the power distribution and position reference face. A plurality of conveyor tables are fixedly coupled to the work table including a first conveyor table through the first face and a second conveyor table through the second face. A vision system monitors the work table and each of the conveyor tables. A programmable controller monitors signal inputs from the vision system to identify and determine orientation of the component on the first conveyor table and control the robotic arm to execute an assembly task.

  19. Optimal pattern synthesis for speech recognition based on principal component analysis

    Science.gov (United States)

    Korsun, O. N.; Poliyev, A. V.

    2018-02-01

    The algorithm for building an optimal pattern for the purpose of automatic speech recognition, which increases the probability of correct recognition, is developed and presented in this work. The optimal pattern forming is based on the decomposition of an initial pattern to principal components, which enables to reduce the dimension of multi-parameter optimization problem. At the next step the training samples are introduced and the optimal estimates for principal components decomposition coefficients are obtained by a numeric parameter optimization algorithm. Finally, we consider the experiment results that show the improvement in speech recognition introduced by the proposed optimization algorithm.

  20. Need for reconceptualization of professional satisfaction and/or work effects in healthcare organizations

    Directory of Open Access Journals (Sweden)

    Vuković Mira H.

    2017-01-01

    Full Text Available Introduction: It is imperative to research professional satisfactions in healthcare organization, since throughout the world job satisfaction in healthcare institution is decreasing, sometimes there is none or is at a very low level. Aim: Evaluation of components of employees’ job satisfaction in General Hospital Valjevo, Valjevo, Serbia, and evaluation of connection of components of their job satisfactions with the presence of anxiety, stress and job pressure. Methods: An observational cross-sectional study of employees’ satisfaction is conducted in General Hospital Valjevo, Valjevo, Serbia based on an anonymous survey from November 2016. Structure and construction validity evaluation of job satisfaction is performed by using Principal Component Analysis. The evaluation of the connection of the satisfaction components with the stress scale was performed by multinomial logistic regression. Results: Two job satisfaction components emerged: 1 extrinsic – environment, autonomy and transparency satisfaction and 2 intrinsic – work content satisfaction. We showed that financial compensation satisfaction, extrinsic, as well as intrinsic component of their job satisfaction is significantly connected with stress and anxiety level at work. Conclusion: It is necessary to conduct a reconceptualization of professional satisfaction and/or work efficiency of health care employees in conditions where, in healthcare organization and/or at whole healthcare system level, the job satisfaction is low or there is none.

  1. Prose recall and amnesia: implications for the structure of working memory.

    Science.gov (United States)

    Baddeley, Alan; Wilson, Barbara A

    2002-01-01

    Two densely amnesic patients are shown to have good immediate but poor delayed prose recall, a result that presents problems for the current multi-component model of working memory. Examination of a wide sample of memory impaired patients suggests that this pattern occurs in densely amnesic patients who have well-preserved intelligence and good executive capacities. Patients suffering from Alzheimer's disease typically show poor immediate and delayed prose recall, reflecting their combined intellectual and memory deficits. The results are interpreted in terms of a proposed new component of working memory, the episodic buffer.

  2. Return-to-work intervention during cancer treatment - The providers' experiences

    DEFF Research Database (Denmark)

    Petersen, K S; Momsen, A H; Stapelfeldt, C M

    2018-01-01

    To explore in-depth understanding of providers' experiences when involved in a return-to-work (RTW) intervention offered during cancer treatment. Semi-structured individual interviews and participant observations at a hospital department and two municipal job centers were carried out, including ten...... providers (physicians, nurses and social workers). A phenomenological-hermeneutic approach was applied, involving coding, identification of themes and interpretation of findings. Three major themes were identified: Treatment first, Work as an integrated component in cancer rehabilitation, and Challenges...... in bringing up work issues. Differences in providers' experiences of the RTW intervention offered to cancer patients were found: in the hospital setting RTW was a second priority, whereas in the municipality job centers it was an integrated component. Further studies are needed to investigate how and when...

  3. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  4. Work limitations among working persons with rheumatoid arthritis: results, reliability, and validity of the work limitations questionnaire in 836 patients.

    Science.gov (United States)

    Walker, Nancy; Michaud, Kaleb; Wolfe, Frederick

    2005-06-01

    To describe workplace limitations and the validity and reliability of the Work Limitations Questionnaire (WLQ) in persons with rheumatoid arthritis (RA). A total of 836 employed persons with RA reported clinical and work related measures and completed the WLQ, a 25 item questionnaire that assesses the impact of chronic health conditions on job performance and productivity. Limitations are categorized into 4 domains: physical demands (PDS), mental demands (MDS), time management demands (TMS), and output demands (ODS), which are then used to calculate the WLQ index. Of the 836 completed WLQ, about 10% (85) could not be scored, as more than half the items in each domain were not applicable to the patient's job. Demographic and clinical variables were associated with missing WLQ scores including older age (OR 1.7, 95% CI 1.3-2.1), male sex (OR 1.9, 95% CI 1.2-3.0), and Health Assessment Questionnaire (HAQ) scores (OR 1.4, 95% CI 1.0-2.0). Work limitations were present in all work domains: PDS (27.5%), MDS (15.7%), ODS (19.4%), and TMS (28.6%), resulting in a mean WLQ index of 5.9 (SD 5.6), which corresponds to a 4.9% decrease in productivity and a 5.1% increase in work hours to compensate for productivity loss. The WLQ index was inversely associated with Medical Outcomes Study Short Form 36 (SF-36) Mental Component Score (MCS; r = -0.60) and Physical Component Score (PCS; r = -0.49). Fatigue (0.5), pain (0.46), and HAQ (0.56) were also significantly associated with the WLQ index. Weaker associations were seen with days unable to perform (0.29), days activities cut down (0.38), and annual income (-0.10). The WLQ is a reliable tool for assessing work productivity. However, persons with RA tend to select jobs that they can do with their RA limitations, with the result that the WLQ does not detect functional limitations as well as the HAQ and SF-36. The WLQ provides special information that is not available using conventional measures of assessment, and can provide helpful

  5. Evidence of aging effects on certain safety-related components: summary and analysis

    International Nuclear Information System (INIS)

    1995-09-01

    In response to interest shown by the Nuclear Energy Agency (NEA), Principal Working Group I (PWG- 1) of the Committee on the Safety of Nuclear Installations (CSNI) conducted a generic study on the effects of aging of active components in nuclear power plants. Representatives from France, Sweden, Finland, Japan, the United States, and the United Kingdom participated in the study by submitting reports documenting aging studies performed in their countries. This report consists of summaries of those reports, along with a comparison of the various statistical analysis methods used in the studies. The studies indicate that with some exceptions, active components generally do not present a significant aging problem in nuclear power plants. Design criteria and effective preventative maintenance programs, including timely replacement of components, are effective in mitigating potential aging problems. However, aging studies (such as qualitative and statistical analyses of failure modes and maintenance data) are an important part of efforts to identify and solve potential aging problems. Solving these problems typically includes such strategies as replacing suspect components with improved components, and implementing improved maintenance programs

  6. Levels of processing and language modality specificity in working memory.

    Science.gov (United States)

    Rudner, Mary; Karlsson, Thomas; Gunnarsson, Johan; Rönnberg, Jerker

    2013-03-01

    Neural networks underpinning working memory demonstrate sign language specific components possibly related to differences in temporary storage mechanisms. A processing approach to memory systems suggests that the organisation of memory storage is related to type of memory processing as well. In the present study, we investigated for the first time semantic, phonological and orthographic processing in working memory for sign- and speech-based language. During fMRI we administered a picture-based 2-back working memory task with Semantic, Phonological, Orthographic and Baseline conditions to 11 deaf signers and 20 hearing non-signers. Behavioural data showed poorer and slower performance for both groups in Phonological and Orthographic conditions than in the Semantic condition, in line with depth-of-processing theory. An exclusive masking procedure revealed distinct sign-specific neural networks supporting working memory components at all three levels of processing. The overall pattern of sign-specific activations may reflect a relative intermodality difference in the relationship between phonology and semantics influencing working memory storage and processing. Copyright © 2012 Elsevier Ltd. All rights reserved.

  7. Calculation and experimental investigation of multi-component ceramic systems

    International Nuclear Information System (INIS)

    Rother, M.

    1994-12-01

    This work shows a way to combine thermodynamic calculations and experiments in order to get useful information on the constitution of metal/non-metal systems. Many data from literature are critically evaluated and used as a basis for experiments and calculations. The following multi-component systems are treated: 1. Multi-component systems of 'ceramic' materials with partially metallic bonding (carbides, nitrides, oxides, borides, carbonitrides, borocarbides, oxinitrides of the 4-8th transition group metals) 2. multi-component systems of non-metallic materials with dominant covalent bonding (SiC, Si 3 N 4 , SiB 6 , BN, Al 4 C 3 , Be 2 C) 3. multi-component systems of non-metallic materials with dominant heteropolar bonding (Al 2 O 3 , TiO 2 , BeO, SiO 2 , ZrO 2 ). The interactions between 1. and 2., 2. and 3., 1. and 3. are also considered. The latest commercially available programmes for the calculation of thermodynamical equilibria and phase diagrams are evaluated and compared considering their facilities and limits. New phase diagrams are presented for many presently unknown multi-component systems; partly known systems are completed on the basis of selected thermodynamic data. The calculations are verified by experimental investigations (metallurgical and powder technology methods). Altogether 690 systems are evaluated, 126 are calculated for the first time and 52 systems are experimentally verified. New data for 60 ternary phases are elaborated by estimating the data limits for the Gibbs energy values. A synthesis of critical evaluation of literature, calculations and experiments leads to new important information about equilibria and reaction behaviour in multi-component systems. This information is necessary to develop new stable and metastable materials. (orig./MM) [de

  8. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  9. MIDAS: an effective tool for work management

    International Nuclear Information System (INIS)

    Ball, D.L.; Billings, M.P.; McCargar, S.B.; Talbot, M.D.; Topping, C.F.

    1985-01-01

    The computerized Master Information Data Acquisition System (MIDAS) is used to control work at facilities that support the Liquid Metal Reactor (LMR) program on the Hanford Site at Richland, Washington. Functions of this software system are to: track authorized maintenance activities, enhance operational safety, track schedule, manpower, and material constraints during work preparation, provide a management tool for quality measurement techniques, and provide an overall repository for technical and safety-related information on components at the Hanford Site 400 Area facilities. This paper describes MIDAS and how it is used as a work management tool. 1 fig

  10. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  11. Optical components for the Nova laser

    International Nuclear Information System (INIS)

    Wallerstein, E.P.; Baker, P.C.; Brown, N.J.

    1982-01-01

    In addition to its other characteristics, the Nova Laser Fusion facility may well be the largest precision optical project ever undertaken. Moreover, during the course of construction, concurrent research and development has been successfully conducted, and has resulted in significant advances in various technical areas, including manufacturing efficiency. Although assembly of the first two beams of Nova is just commencing, the optical production, including construction of the special facilities required for many of the components, has been underway for over three years, and many phases of the optical manufacturing program for the first 10 beams will be completed within the next two years. On the other hand, new requirements for second and third harmonic generation have created the need to initiate new research and development. This work has been accomplished through the enormous cooperation DOE/LLNL has received from commercial industry on this project. In many cases, industry, where much of the optical component research and development and virtually all of the manufacturing is being done, has made substantial investment of its own funds in facilities, equipment, and research and development, in addition to those supplied by DOE/LLNL

  12. Self-tracking and Persuasive eCoaching in Healthy Lifestyle Interventions : Work-in-progress Scoping Review of Key Components

    NARCIS (Netherlands)

    Lentferink, Aniek Joset; Oldenhuis, Hilbrand; Kulyk, Olga Anatoliyivna; de Groot, Martijn; Polstra, Louis; Velthuijsen, Hugo; Hermens, Hermanus J.; van Gemert-Pijnen, Lisette

    2016-01-01

    The combination of self-tracking and persuasive eCoaching in healthy lifestyle interventions is a promising approach. The objective of this study is to map the key components of existing healthy lifestyle interventions combining self-tracking and persuasive eCoaching using the scoping review

  13. Moly99 Production Facility: Report on Beamline Components, Requirements, Costs

    Energy Technology Data Exchange (ETDEWEB)

    Bishofberger, Kip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-23

    In FY14 we completed the design of the beam line for the linear accelerator production design concept. This design included a set of three bending magnets, quadrupole focusing magnets, and octopoles to flatten the beam on target. This design was generic and applicable to multiple different accelerators if necessary. In FY15 we built on that work to create specifications for the individual beam optic elements, including power supply requirements. This report captures the specification of beam line components with initial cost estimates for the NorthStar production facility.This report is organized as follows: The motivation of the beamline design is introduced briefly, along with renderings of the design. After that, a specific list is provided, which accounts for each beamline component, including part numbers and costs, to construct the beamline. After that, this report details the important sections of the beamline and individual components. A final summary and list of follow-on activities completes this report.

  14. Mitigating component performance variation

    Science.gov (United States)

    Gara, Alan G.; Sylvester, Steve S.; Eastep, Jonathan M.; Nagappan, Ramkumar; Cantalupo, Christopher M.

    2018-01-09

    Apparatus and methods may provide for characterizing a plurality of similar components of a distributed computing system based on a maximum safe operation level associated with each component and storing characterization data in a database and allocating non-uniform power to each similar component based at least in part on the characterization data in the database to substantially equalize performance of the components.

  15. Strategy for determining life expectancy in mechanical components in an overall system

    International Nuclear Information System (INIS)

    Tenckhoff, E.; Erve, M.

    1990-01-01

    The safety standard at a nuclear power station achieved at the time of commissioning on the basis of the state of the art during the design and construction stage has to be maintained over the entire working life of the unit. Original design life expectancy is under review in the light of new safety experience and developments. The results of such analysis can serve not only preventive maintenance purposes but also as the basis for supporting and extending the planned or approved working life; they help increase availability. A comprehensive analysis strategy to establish the actual condition and residual life expectancy of components, systems and complete units has been developed by Siemens/KWU. The results of this analysis can lead to action to extend the life expectancy of components and systems and improvements in systems and subsystems. This report quotes a number of examples. 6 figs

  16. National Ignition Facility and managing location, component, and state

    International Nuclear Information System (INIS)

    Foxworthy, Cemil; Fung, Tracy; Beeler, Rich; Li, Joyce; Dugorepec, Jasna; Chang, Cathy

    2012-01-01

    Highlights: ► NIF in comprised of over 100k serialized parts that must be tracked and maintained. ► We discuss a web-based integrated parts management system designed for NIF. ► The parts database stores associated calibration data with effective dates. ► The system interfaces with the NIF control system and performance models. ► Work activity (Permits, Problem Logs, Work Orders) are managed by the system. - Abstract: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system coupled with a 10-m diameter target chamber. There are over 6200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements. Architecture and implementation decisions are discussed.

  17. Acceptance test for graphite components and construction status of HTTR

    International Nuclear Information System (INIS)

    Iyoku, T.; Ishihara, M.; Maruyama, S.; Shiozawa, S.; Tsuji, N.; Miki, T.

    1996-01-01

    In March, 1991, the Japan Atomic Energy Research Institute (JAERI) started to constructed the High Temperature engineering Test Reactor(HTTR) which is a 30-MW(thermal) helium gas-cooled reactor with a core composed of prismatic graphite blocks piled on the core support graphite structures. Two types of graphite materials are used in the HTTR. One is the garde IG-110, isotropic fine grain graphite, another is the grade PGX, medium-to-fine grained molded graphite. These materials were selected on the basis of the appropriate properties required by the HTTR reactor design. Industry-wide standards for an acceptance test of graphite materials used as main components of a nuclear reactor had not been established. The acceptance standard for graphite components of the HTTR, therefore, was drafted by JAERI and reviewed by specialists outside JAERI. The acceptance standard consists of the material testing, non-destructive examination such as the ultrasonic and eddy current testings, dimensional and visual inspections and assembly test. Ultrasonic and eddy current testings are applied to graphite logs to detect an internal flaw and to graphite components to detect a surface flaw, respectively. The assembly test is performed at the works, prior to their installation in the reactor pressure vessel, to examine fabricating precision of each component and alignment of piled-up structures. The graphite components of the HTTR had been tested on the basis of the acceptance standard. It was confirmed that the graphite manufacturing process was well controlled and high quality graphite components were provided to the HTTR. All graphite components except for the fuel graphite blocks are to be installed in the reactor pressure vessel of the HTTR in September 1995. The paper describes the construction status of the HTTR focusing on the graphite components. The acceptance test results are also presented in this paper. (author). Figs

  18. PENGARUH KOMPONEN WORKING CAPITAL TERHADAP PROFITABILITAS PERUSAHAAN

    Directory of Open Access Journals (Sweden)

    Anggita Langgeng Wijaya

    2012-03-01

    Full Text Available Penelitian ini menguji efek komponen modal kerja terhadap profitabilitas  perusahaan manufaktur yang terdaftar di Bursa Efek Indonesia selama periode 2005-2007. Komponen modal kerja yang digunakan dalam penelitian ini meliputi aktiva lancar terhadap rasio aset total, kewajiban lancar terhadap  rasio aset total, rasio lancar, rasio leverage dan uang tunai. Populasi penelitian ini adalah semua perusahaan manufaktur di Bursa Efek Indonesia. Metode pengambilan sampel yang digunakan adalah metode purposif. Dan analisis regresi berganda digunakan untuk uji hipotesisnya. Hasil penelitian menunjukkan bahwa: komponen modal kerja memiliki pengaruh penting pada profitabilitas perusahaan. Kewajiban lancar terhadap rasio aset total, rasio lancar dan leverage berdampak negatif terhadap profitabilitas. Di sisi lain, current aset terhadap aset rasio total dan cash ratio berdampak positif pada profitabilitas. This research tests the effect of working capital’s component to the profitability of manufacturing company listed in Indonesia Stock Exchange over the period of 2005-2007. The working capital’s components used in this research include current asset to total asset ratio, current liabilities to total asset ratio, current ratio, leverage and cash ratio. Population of this research is all of manufacturing company at Indonesia Stock Exchange. Sampling method uses purposive sampling method. Hypothesis test uses multiple regression analysis. The results show that working capital component has significance influence on corporate profitability, current liabilities to total asset ratio, current ratio and leverage have negative impact on profitability. In other side, current asset to total asset ratio and cash ratio have positive impact on profitability.

  19. Using intervention mapping to deconstruct cognitive work hardening: a return-to-work intervention for people with depression.

    Science.gov (United States)

    Wisenthal, Adeena; Krupa, Terry

    2014-12-12

    Mental health related work disability leaves are increasing at alarming rates with depression emerging as the most common mental disorder in the workforce. Treatments are available to alleviate depressive symptoms and associated functional impacts; however, they are not specifically aimed at preparing people to return to work. Cognitive work hardening (CWH) is a novel intervention that addresses this gap in the health care system. This paper presents a theoretical analysis of the components and underlying mechanisms of CWH using Intervention Mapping (IM) as a tool to deconstruct its elements. The cognitive sequelae of depression and their relevance to return-to-work (RTW) are examined together with interpersonal skills and other work-related competencies that affect work ability. IM, a tool typically used to create programs, is used to deconstruct an existing program, namely CWH, into its component parts and link them to theories and models in the literature. CWH has been deconstructed into intervention elements which are linked to program performance objectives through underlying theoretical models. In this way, linkages are made between tools and materials of the intervention and the overall program objective of 'successful RTW for people with depression'. An empirical study of the efficacy of CWH is currently underway which should provide added insight and understanding into this intervention. The application of IM to CWH illustrates the theoretical underpinnings of the treatment intervention and assists with better understanding the linkage between intervention elements and intervention objective. Applying IM to deconstruct an existing program (rather than create a program) presents an alternate application of the IM tool which can have implications for other programs in terms of enhancing understanding, grounding in theoretical foundations, communicating program design, and establishing a basis for program evaluation and improvement.

  20. Prevalence and Predictors of Social Work Student Food Insecurity

    Science.gov (United States)

    Miles, Rhen; McBeath, Bowen; Brockett, Stephanie; Sorenson, Paul

    2017-01-01

    Food security is an essential component of material wellness and social justice. This study draws on a 2013 survey of 496 students within a school of social work in a Pacific Northwestern U.S. public university to (a) provide the first estimate of the prevalence of food insecurity among social work students and (b) investigate coping strategies…

  1. A comparative study of the working memory multicomponent model in psychosis and healthy controls.

    Science.gov (United States)

    Sánchez-Torres, Ana M; Elosúa, M Rosa; Lorente-Omeñaca, Ruth; Moreno-Izco, Lucía; Cuesta, Manuel J

    2015-08-01

    Working memory deficits are considered nuclear deficits in psychotic disorders. However, research has not found a generalized impairment in all of the components of working memory. We aimed to assess the components of the Baddeley and Hitch working memory model: the temporary systems-the phonological loop, the visuospatial sketchpad and the episodic buffer (introduced later by Baddeley)-and the central executive system, which includes four executive functions: divided attention, updating, shifting and inhibition. We assessed working memory performance in a sample of 21 patients with a psychotic disorder and 21 healthy controls. Patients also underwent a clinical assessment. Both univariate and repeated measures ANOVAs were applied to analyze performance in the working memory components between groups. Patients with a psychotic disorder underperformed compared to the controls in all of the working memory tasks, but after controlling for age and premorbid IQ, we only found a difference in performance in the N-Back task. Repeated measures ANCOVAs showed that patients also underperformed compared to the controls in the Digit span test and the TMT task. Not all of the components of working memory were impaired in the patients. Specifically, patients' performance was impaired in the tasks selected to assess the phonological loop and the shifting executive function. Patients' also showed worse performance than controls in the N-Back task, representative of the updating executive function. However, we did not find higher impairment in the patients' performance respect to controls when increasing the loading of the task. Copyright © 2015 Elsevier Inc. All rights reserved.

  2. Method of using infrared radiation for assembling a first component with a second component

    Science.gov (United States)

    Sikka, Vinod K.; Whitson, Barry G.; Blue, Craig A.

    1999-01-01

    A method of assembling a first component for assembly with a second component involves a heating device which includes an enclosure having a cavity for inserting a first component. An array of infrared energy generators is disposed within the enclosure. At least a portion of the first component is inserted into the cavity, exposed to infrared energy and thereby heated to a temperature wherein the portion of the first component is sufficiently softened and/or expanded for assembly with a second component.

  3. Leader-member exchange and work-family interactions: the mediating role of self-reported challenge- and hindrance-related stress.

    Science.gov (United States)

    Culbertson, Satoris S; Huffman, Ann H; Alden-Anderson, Rachel

    2010-01-01

    The authors examined the relations among 4 components of the leader-member exchange (LMX) relationship (i.e., contribution, affect, loyalty, and professional respect) and the level of work-family conflict and work-family facilitation that an employee experiences. Further, the authors examined the mediating role of challenge- and hindrance-related self-reported stress on relations. In doing this, the authors linked positive and negative aspects of LMX, stressors, work-family conflict, and work-family facilitation. Data from a sample of full-time employed individuals support some hypothesized relations between components of LMX and work-family interactions. Also, results support the mediating role of hindrance-related stress in the relation between (a) the affect and loyalty components of LMX and (b) work-family conflict. The authors discuss the implications and limitations of their findings.

  4. Vlasov Simulation of Electrostatic Solitary Structures in Multi-Component Plasmas

    Science.gov (United States)

    Umeda, Takayuki; Ashour-Abdalla, Maha; Pickett, Jolene S.; Goldstein, Melvyn L.

    2012-01-01

    Electrostatic solitary structures have been observed in the Earth's magnetosheath by the Cluster spacecraft. Recent theoretical work has suggested that these solitary structures are modeled by electron acoustic solitary waves existing in a four-component plasma system consisting of core electrons, two counter-streaming electron beams, and one species of background ions. In this paper, the excitation of electron acoustic waves and the formation of solitary structures are studied by means of a one-dimensional electrostatic Vlasov simulation. The present result first shows that either electron acoustic solitary waves with negative potential or electron phase-space holes with positive potential are excited in four-component plasma systems. However, these electrostatic solitary structures have longer duration times and higher wave amplitudes than the solitary structures observed in the magnetosheath. The result indicates that a high-speed and small free energy source may be needed as a fifth component. An additional simulation of a five-component plasma consisting of a stable four-component plasma and a weak electron beam shows the generation of small and fast electron phase-space holes by the bump-on-tail instability. The physical properties of the small and fast electron phase-space holes are very similar to those obtained by the previous theoretical analysis. The amplitude and duration time of solitary structures in the simulation are also in agreement with the Cluster observation.

  5. Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing

    Energy Technology Data Exchange (ETDEWEB)

    Spaang, Kjell [Ingemansson Technology AB, Goeteborg (Sweden); Staahl, Gunnar [Westinghouse Atom, Vaesteraas (Sweden)

    2002-05-01

    This report reviews R and D results and experiences forming the bases for the preparation of a report on management of ageing. It includes basic information and descriptions of value for persons who work with the questions and some data from investigations of the ageing characteristics of various materials: limit levels, dose-rate effects, activation energies, methods for condition monitoring, etc. This report is restricted to safety related components containing ageing sensitive parts, mainly organic materials (polymers). For components located in the containment, the possibilities of continuous supervision are limited. The accessibility for regular inspections is also limited in many cases. Therefore, the main part of this report deals with the qualification of such components. In addition, some material is given on qualification located outside containment with better possibilities for frequent inspection and supervision. A survey is made of activities, programs and tools for ageing qualification in connection with initial environmental qualification (type testing) as well as after installation (condition monitoring, extension of qualified life through on-going qualification). Tools are also given for supplementary ageing qualification of already installed components.

  6. Qualification of Electrical Components in Nuclear Power Plants. Management of Ageing

    International Nuclear Information System (INIS)

    Spaang, Kjell; Staahl, Gunnar

    2002-05-01

    This report reviews R and D results and experiences forming the bases for the preparation of a report on management of ageing. It includes basic information and descriptions of value for persons who work with the questions and some data from investigations of the ageing characteristics of various materials: limit levels, dose-rate effects, activation energies, methods for condition monitoring, etc. This report is restricted to safety related components containing ageing sensitive parts, mainly organic materials (polymers). For components located in the containment, the possibilities of continuous supervision are limited. The accessibility for regular inspections is also limited in many cases. Therefore, the main part of this report deals with the qualification of such components. In addition, some material is given on qualification located outside containment with better possibilities for frequent inspection and supervision. A survey is made of activities, programs and tools for ageing qualification in connection with initial environmental qualification (type testing) as well as after installation (condition monitoring, extension of qualified life through on-going qualification). Tools are also given for supplementary ageing qualification of already installed components

  7. Technical meeting on materials for in-vessel components of ITER

    International Nuclear Information System (INIS)

    Kalinin, G.; Barabash, V.

    2000-01-01

    The Technical meeting on materials for in-vessel components of ITER was held at the ITER Joint Work Site in Garching from 31 January to 4 February. The main objectives of the meetings were: 1. to summarize the requirements, 2. to review new data, 3. to discuss in detail the R and D program and to discuss the material assessment report

  8. Working Memory in the Prefrontal Cortex

    Science.gov (United States)

    Funahashi, Shintaro

    2017-01-01

    The prefrontal cortex participates in a variety of higher cognitive functions. The concept of working memory is now widely used to understand prefrontal functions. Neurophysiological studies have revealed that stimulus-selective delay-period activity is a neural correlate of the mechanism for temporarily maintaining information in working memory processes. The central executive, which is the master component of Baddeley’s working memory model and is thought to be a function of the prefrontal cortex, controls the performance of other components by allocating a limited capacity of memory resource to each component based on its demand. Recent neurophysiological studies have attempted to reveal how prefrontal neurons achieve the functions of the central executive. For example, the neural mechanisms of memory control have been examined using the interference effect in a dual-task paradigm. It has been shown that this interference effect is caused by the competitive and overloaded recruitment of overlapping neural populations in the prefrontal cortex by two concurrent tasks and that the information-processing capacity of a single neuron is limited to a fixed level, can be flexibly allocated or reallocated between two concurrent tasks based on their needs, and enhances behavioral performance when its allocation to one task is increased. Further, a metamemory task requiring spatial information has been used to understand the neural mechanism for monitoring its own operations, and it has been shown that monitoring the quality of spatial information represented by prefrontal activity is an important factor in the subject's choice and that the strength of spatially selective delay-period activity reflects confidence in decision-making. Although further studies are needed to elucidate how the prefrontal cortex controls memory resource and supervises other systems, some important mechanisms related to the central executive have been identified. PMID:28448453

  9. Control component retainer

    International Nuclear Information System (INIS)

    Walton, L.A.; King, R.A.

    1983-01-01

    An apparatus is described for retaining an undriven control component assembly disposed in a fuel assembly in a nuclear reactor of the type having a core grid plate. The first part of the mechanism involves a housing for the control component and the second part is a brace with a number of arms that reach under the grid plate. The brace and the housing are coupled together to firmly hold the control components in place even under strong flows of th coolant

  10. Analysis and discussion on several problems when testing the thickness of reinforcement cover of concrete component

    Science.gov (United States)

    Zhanhua, Zhang; Guiling, Ji; Lijie; Zhaobo, Zhang; Na, Han; Jing, Zhao; Tan, Li; Zhaorui, Liu

    2018-03-01

    Reinforcement cover of concrete component plays a very important role to ensure the durability of various types of structures and the effective anchorage between steel reinforcement and concrete. This paper discusses and analyzes the problems occurred when testing the thickness of reinforcement cover of concrete component, so as to provide reference and help for related work.

  11. ANALISIS FAKTOR-FAKTOR DALAM KUALITAS KEHIDUPAN KERJA (QUALITY WORK LIFE DI FAKULTAS EKONOMI UNIVERSITAS NEGERI JAKARTA

    Directory of Open Access Journals (Sweden)

    Umi Widyastuti

    2012-03-01

    Full Text Available Many factors determine the meaning of quality of work life (QWL. This research reviews the factors of QWL based on models and past research. The factors of QWL discussed are balance between life and non life, the work itself, skill utilization, working condition, job involvement, co-worker relationship, promotion, salary and supervisory. Confirmatory Factor Analysis is used to determine dominant factors of QWL. This research concludes that all the factors we discussed have the value of Keiser Meyers Oklin Measure of Sampling Adequacy more than 0.5, except salary. It means that eight factors which determine QWL are balance between life and non life, the work itself, skill utilization, working condition, job involvement, co-worker relationship, promotion and supervisory. After varimax rotation process and based on criteria eigenvalue more than 1, this research has formed two component from all the factors. Component 1 consist of the factor: balance between life and non life, working condition, promotion and supervisory. And component 2 consist of the factor: work itself, skill utilization, job involvement and co-worker relationship.

  12. CATEGORICAL IMAGE COMPONENTS IN THE FORMING SYSTEM OF A MARKETING TECHNIQUES MANAGER’S IMAGE CULTURE

    Directory of Open Access Journals (Sweden)

    Anna Borisovna Cherednyakova

    2015-08-01

    Full Text Available Based on the understanding of the image culture formation of managers of marketing techniques, as a representative of the social and communication interaction of public structures, categorical apparatus of image culture with an emphasis on the etymology of the image, as an integral component of image culture was analyzed. Categorical components of the image are presented from the standpoint of image culture, as personal new formation, an integral part of the professional activity of the marketing techniques manager: object-communicative categorical component, subject-activity categorical component of image, personality-oriented categorical component, value-acmeological categorical component of image.The aim is to identify and justify the image categorical components as a component of image culture of the marketing techniques manager.Method and methodology of work – a general scientific research approach reflecting scientific apparatus of research.Results. Categorical components of the image, as an image culture component of manager of marketing techniques were defined.Practical implication of the results. The theoretical part of «Imageology» course, special course «Image culture of manager of marketing techniques», the theoretical and methodological study and the formation of image culture.

  13. [Changes in the nature of work].

    Science.gov (United States)

    Schütte, M; Köper, B

    2013-03-01

    "Dynamic", "complexity", and "diversity" are terms that best describe the challenges in the workplace resulting from the changing nature of work. These changes should conform to the criteria of human-related work design. However, the number of pensions for reduced earning capacity and the number of unfit for work days caused by psychic disorders are rising. Affective disorders, including depression, are the largest group. Depression represents a long-term consequence of work demands. Empirical results confirm a significant relationship between depression and the objective existing as well as the subjective perceived workload conditions. Burn-out as a further long-term consequence depends inter alia on the design of the physical work demands, the environmental conditions, the psychosocial conditions, and the transparency of the decision and information processes in a company. Additionally, empirical results show that the short-term consequences of work demands, i.e., fatigue, satiation, and monotony correlate with the burn-out components of exhaustion and alienation from work. Furthermore, using restructuring as an example, it is demonstrated that the changes in work that accompany modifications in the working world also have other health-related consequences.

  14. 2-component heating systems

    Energy Technology Data Exchange (ETDEWEB)

    Radtke, W

    1987-03-01

    The knowledge accumulated only recently of the damage to buildings and the hazards of formaldehyde, radon and hydrocarbons has been inducing louder calls for ventilation, which, on their part, account for the fact that increasing importance is being attached to the controlled ventilation of buildings. Two-component heating systems provide for fresh air and thermal comfort in one. While the first component uses fresh air blown directly and controllably into the rooms, the second component is similar to the Roman hypocaustic heating systems, meaning that heated outer air is circulating under the floor, thus providing for hot surfaces and thermal comfort. Details concerning the two-component heating system are presented along with systems diagrams, diagrams of the heating system and tables identifying the respective costs. Descriptions are given of the two systems components, the fast heat-up, the two-component made, the change of air, heat recovery and control systems. Comparative evaluations determine the differences between two-component heating systems and other heating systems. Conclusive remarks are dedicated to energy conservation and comparative evaluations of costs. (HWJ).

  15. Trait anxiety and the neural efficiency of manipulation in working memory

    NARCIS (Netherlands)

    Basten, U.; Stelzel, C.; Fiebach, C.J.

    2012-01-01

    The present study investigates the effects of trait anxiety on the neural efficiency of working memory component functions (manipulation vs. maintenance) in the absence of threat-related stimuli. For the manipulation of affectively neutral verbal information held in working memory, high- and

  16. A key component of the Globe arrives

    CERN Multimedia

    2003-01-01

    The first component of the Palais de l'Equilibre arrived at CERN last week. Renamed the Globe of Innovation, this elegant wooden sphere will be inaugurated in October 2004. The convoy transporting the first component of the Palais de l'Equilibre, the keystone of the famous wooden globe, arrived at CERN on the night of 28th August in the middle of a violent storm and dramatic flashes of lightning. Erected in Neuchâtel last year for the EXPO.02 exhibition, the Palais de l'Equilibre was a gift to the Laboratory from the Swiss Confederation (see Bulletin 25/2003). The gift of the structure and 4 million Swiss francs, together with help from the Swiss army for the reassembly work, received the final approval of the Swiss Federal Council on 20th August 2003. Renamed the Globe of Innovation, the 27-metre-high sphere measuring 40 metres in diameter will house the Laboratory's new exhibition centre in 2005. The keystone, known as the "central vertex", is a crown measuring 6.5 m in diameter and 4.5 m high, located a...

  17. Work-Life Balance: the Links with Management Practices and Productivity

    OpenAIRE

    Nick Bloom; Tobias Kretschmer; John Van Reenen

    2006-01-01

    Does good management and higher productivity come at the expense of work-life balance? Or is good work-life balance an important component of the management of successful firms? New research by Nick Bloom, Tobias Kretschmer and John Van Reenen finds evidence for a hybrid view between these two polar extremes.

  18. Determining the Optimum Level of Working Capital in the Cameroon ...

    African Journals Online (AJOL)

    The issue of working capital is very important to the operations of the Cameroon Development Corporation (CDC) Net working capital (i.e. the excess of liquid current assets over current liabilities) is an indispensable component of any business organization's capital structure. For any company to make profit in order to ...

  19. Organic aerosol components observed in Northern Hemispheric datasets from Aerosol Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    N. L. Ng

    2010-05-01

    Full Text Available In this study we compile and present results from the factor analysis of 43 Aerosol Mass Spectrometer (AMS datasets (27 of the datasets are reanalyzed in this work. The components from all sites, when taken together, provide a holistic overview of Northern Hemisphere organic aerosol (OA and its evolution in the atmosphere. At most sites, the OA can be separated into oxygenated OA (OOA, hydrocarbon-like OA (HOA, and sometimes other components such as biomass burning OA (BBOA. We focus on the OOA components in this work. In many analyses, the OOA can be further deconvolved into low-volatility OOA (LV-OOA and semi-volatile OOA (SV-OOA. Differences in the mass spectra of these components are characterized in terms of the two main ions m/z 44 (CO2+ and m/z 43 (mostly C2H3O+, which are used to develop a new mass spectral diagnostic for following the aging of OA components in the atmosphere. The LV-OOA component spectra have higher f44 (ratio of m/z 44 to total signal in the component mass spectrum and lower f43 (ratio of m/z 43 to total signal in the component mass spectrum than SV-OOA. A wide range of f44 and O:C ratios are observed for both LV-OOA (0.17±0.04, 0.73±0.14 and SV-OOA (0.07±0.04, 0.35±0.14 components, reflecting the fact that there is a continuum of OOA properties in ambient aerosol. The OOA components (OOA, LV-OOA, and SV-OOA from all sites cluster within a well-defined triangular region in the f44 vs. f43 space, which can be used as a standardized means for comparing and characterizing any OOA components (laboratory or ambient observed with the AMS. Examination of the OOA components in this triangular space indicates that OOA component spectra become increasingly similar to each other and to fulvic acid and HULIS sample spectra as f44 (a

  20. Component Commonality and Its Cost Implications - Increasing the Commonality of the Right Components

    DEFF Research Database (Denmark)

    Lyly-Yrjänäinen, Jouni; Suomala, Petri; Israelsen, Poul

    Component commonality (Labro 2004, Zhou & Gruppström 2004) can be defined as the use of the same version of a component across multiple products. It is usually seen as a means to manage costs without sacrificing product variety. However, when managing costs with component commonality, the managers...... constructions was identified as the most important bottleneck for the delivery process causing many indirect costs, especially with respect to project-management-related activities. Interestingly, by eliminating the need for mechanical engineering, the context starts to approach assembly-to-order context, also...... should be able to identify rather rapidly which group of components would enable the most significant cost reductions. Unfortunately, the existing literature lacks profound discussion of how to identify the right components for increased component commonality. The objective of the paper is to discuss how...

  1. Transformable Menu Component for Mobile Device Applications: Working with both Adaptive and Adaptable User Interfaces

    Directory of Open Access Journals (Sweden)

    V. Glavinic

    2008-08-01

    Full Text Available Using a learning system in a mobile environmentis not effective if barriers are not overcome in theinteraction with targeted users. For that purpose all mobileservices, including m-learning ones, demand specialattention being paid to interaction with the user. Whilemobile device applications are becoming more powerful,their development process must utilize the concepts ofuniversal access and universal usability. This paperdescribes the model of both adaptable and adaptive mobileuser interface, through the introduction of a transformablemenu component capable to be personalized to eachindividual user with respect to her/his preferences andinteraction style. We discuss the use of customization andadaptation techniques, with the aim to both enhance mobileHCI and to increase user satisfaction, particularly whenworking with graphically rich m-learning applications.

  2. Repurposing learning object components

    NARCIS (Netherlands)

    Verbert, K.; Jovanovic, J.; Gasevic, D.; Duval, E.; Meersman, R.

    2005-01-01

    This paper presents an ontology-based framework for repurposing learning object components. Unlike the usual practice where learning object components are assembled manually, the proposed framework enables on-the-fly access and repurposing of learning object components. The framework supports two

  3. A New Efficient Algorithm for the All Sorting Reversals Problem with No Bad Components.

    Science.gov (United States)

    Wang, Biing-Feng

    2016-01-01

    The problem of finding all reversals that take a permutation one step closer to a target permutation is called the all sorting reversals problem (the ASR problem). For this problem, Siepel had an O(n (3))-time algorithm. Most complications of his algorithm stem from some peculiar structures called bad components. Since bad components are very rare in both real and simulated data, it is practical to study the ASR problem with no bad components. For the ASR problem with no bad components, Swenson et al. gave an O (n(2))-time algorithm. Very recently, Swenson found that their algorithm does not always work. In this paper, a new algorithm is presented for the ASR problem with no bad components. The time complexity is O(n(2)) in the worst case and is linear in the size of input and output in practice.

  4. Metrology for WEST components design and integration optimization

    International Nuclear Information System (INIS)

    Brun, C.; Archambeau, G.; Blanc, L.; Bucalossi, J.; Chantant, M.; Gargiulo, L.; Hermenier, A.; Le, R.; Pilia, A.

    2015-01-01

    Highlights: • Metrology methods. • Interests of metrology campaign to optimize margins by reducing uncertainties. • Assembly problems are solved and validated on a numerical mock up. • Post treatment of full 3DScan of the vacuum vessel. - Abstract: On WEST new components will be implemented in an existing environment, emphasis has to be put on the metrology to optimize the design and the assembly. Hence, at a particular stage of the project, several components have to coexist in the limited vessel. Therefore, all the difficulty consists in validating the mechanical interfaces between existing components and new one; minimize the risk of the assembling and to maximize the plasma volume. The CEA/IRFM takes the opportunity of the ambitious project to sign a partnership with an industrial specialized in multipurpose metrology domains. To optimize the assembly procedure, the IRFM Assembly group works in strong collaboration with its industrial, to define and plan the campaigns of metrology. The paper will illustrate the organization, methods and results of the dedicated metrology campaigns have been defined and carried out in the WEST dis/assembly phase. To conclude, the future needs of metrology at CEA/IRFM will be exposed to define the next steps.

  5. Chemical components, pharmacological properties, and nanoparticulate delivery systems of Brucea javanica

    Directory of Open Access Journals (Sweden)

    Peng X

    2013-01-01

    Full Text Available Meiwan Chen,1,‡ Ruie Chen,1,‡ Shengpeng Wang,1 Wen Tan,1 Yangyang Hu,1 Xinsheng Peng,2 Yitao Wang11State Key Laboratory of Quality Research in Chinese Medicine, Institute of Chinese Medical Sciences, University of Macau, Macau, China; 2School of Pharmaceutical Sciences, Guangdong Medical College, Dongguan, China‡These authors contributed equally to this workAbstract: Brucea javanica has demonstrated a variety of antitumoral, antimalarial, and anti-inflammatory properties. As a Chinese herbal medicine, Brucea javanica is mainly used in the treatment of lung and gastrointestinal cancers. Pharmacological research has identified the main antitumor components are tetracyclic triterpene quassinoids. However, most of these active components have poor water solubility and low bioavailability, which greatly limit their clinical application. Nanoparticulate delivery systems are urgently needed to improve the bioavailability of Brucea javanica. This paper mainly focuses on the chemical components in Brucea javanica and its pharmacological properties and nanoparticulate formulations, in an attempt to encourage further research on its active components and nanoparticulate drug delivery systems to expand its clinical applications. It is expected to improve the level of pharmaceutical research and provide a strong scientific foundation for further study on the medicinal properties of this plant.Keywords: Brucea javanica, chemical components, pharmacology, nanoparticulate delivery systems

  6. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  7. The Individual Regulation Component of Group Emotional Intelligence: Measure Development and Validation

    Science.gov (United States)

    Peterson, Christina Hamme

    2012-01-01

    Counseling work is increasingly conducted in team format. The methods counseling teams use to manage the emotional component of their group life, or their group emotional intelligence, have been proposed as significantly contributing to group member trust, cooperation, and ultimate performance. Item development, exploratory factor analysis, and…

  8. CFCC working group meeting: Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This report is a compilation of the vugraphs presented at this meeting. Presentations covered are: CFCC Working Group; Overview of study on applications for advanced ceramics in industries for the future; Design codes and data bases: The CFCC program and its involvement in ASTM, ISO, ASME, and military handbook 17 activities; CFCC Working Group meeting (McDermott Technology); CFCC Working Group meeting (Textron); CFCC program for DMO materials; Developments in PIP-derived CFCCs; Toughened Silcomp (SiC-Si) composites for gas turbine engine applications; CFCC program for CVI materials; Self-lubricating CFCCs for diesel engine applications; Overview of the CFCC program`s supporting technologies task; Life prediction methodologies for CFCC components; Environmental testing of CFCCs in combustion gas environments; High-temperature particle filtration ORNL/DCC CRADA; HSCT CMC combustor; and Case study -- CFCC shroud for industrial gas turbines.

  9. Generalized structured component analysis a component-based approach to structural equation modeling

    CERN Document Server

    Hwang, Heungsun

    2014-01-01

    Winner of the 2015 Sugiyama Meiko Award (Publication Award) of the Behaviormetric Society of Japan Developed by the authors, generalized structured component analysis is an alternative to two longstanding approaches to structural equation modeling: covariance structure analysis and partial least squares path modeling. Generalized structured component analysis allows researchers to evaluate the adequacy of a model as a whole, compare a model to alternative specifications, and conduct complex analyses in a straightforward manner. Generalized Structured Component Analysis: A Component-Based Approach to Structural Equation Modeling provides a detailed account of this novel statistical methodology and its various extensions. The authors present the theoretical underpinnings of generalized structured component analysis and demonstrate how it can be applied to various empirical examples. The book enables quantitative methodologists, applied researchers, and practitioners to grasp the basic concepts behind this new a...

  10. Contribution to the edaphic components definition in the desertification susceptibility index

    International Nuclear Information System (INIS)

    Sampaio, E. P.; Corte-Real, J. A.

    2009-01-01

    Many of the biophysical processes involved in the scope of desertification depend on the hydric characteristics of the soils the impact on vegetation cover. To protect soils against desertification, it is necessary to understand how some of these characteristics (such as water storage) interact in a complex and integrated chain of degradation processes. Several works have been developed to contribute to the definition of a Index of Desertification Susceptibility (DSI) expressed as a function of several components, climatic, edaphic, vegetative and slope. However, the various built-in edaphic components already defined, leave aside the water retention in soil. Furthermore, these components only focus on the characteristics of the uppermost surface soil layer (A-layer). In fact, desertification is simultaneously cause and consequence of the depleted soil water retention with a positive feedback of the plant life and on the hydrological cycle. (Author) 10 refs.

  11. Contribution to the edaphic components definition in the desertification susceptibility index

    Energy Technology Data Exchange (ETDEWEB)

    Sampaio, E. P.; Corte-Real, J. A.

    2009-07-01

    Many of the biophysical processes involved in the scope of desertification depend on the hydric characteristics of the soils the impact on vegetation cover. To protect soils against desertification, it is necessary to understand how some of these characteristics (such as water storage) interact in a complex and integrated chain of degradation processes. Several works have been developed to contribute to the definition of a Index of Desertification Susceptibility (DSI) expressed as a function of several components, climatic, edaphic, vegetative and slope. However, the various built-in edaphic components already defined, leave aside the water retention in soil. Furthermore, these components only focus on the characteristics of the uppermost surface soil layer (A-layer). In fact, desertification is simultaneously cause and consequence of the depleted soil water retention with a positive feedback of the plant life and on the hydrological cycle. (Author) 10 refs.

  12. Antecedents and outcomes of a fourfold taxonomy of work-family balance in Chinese employed parents.

    Science.gov (United States)

    Lu, Jia-Fang; Siu, Oi-Ling; Spector, Paul E; Shi, Kan

    2009-04-01

    The study provided validity evidence for a fourfold taxonomy of work-family balance that comprises direction of influence (work to family vs. family to work) and types of effect (work-family conflict vs. work-family facilitation). Data were collected from 189 employed parents in China. The results obtained from a confirmatory factor analysis supported the factorial validity of the fourfold taxonomy of work-family balance with a Chinese sample. Child care responsibilities, working hours, monthly salary, and organizational family-friendly policy were positively related to the conflict component of work-family balance; whereas new parental experience, spouse support, family-friendly supervisors and coworkers had significant positive effects on the facilitation component of work-family balance. In comparison with the inconsistent effects of work-family conflict, work to family facilitation had consistent positive effects on work and life attitudes. The implications of findings in relation to China and other countries are discussed in the paper.

  13. Working memory in Farsi-speaking children with normal development and cochlear implant.

    Science.gov (United States)

    Soleymani, Zahra; Amidfar, Meysam; Dadgar, Hooshang; Jalaie, Shohre

    2014-04-01

    Working memory has an important role in language acquisition and development of cognition skills. The ability of encoding, storage and retrieval of phonological codes, as activities of working memory, acquired by audition sense. Children with cochlear implant experience a period that they are not able to perceive sounds. In order to assess the effect of hearing on working memory, we investigated working memory as a cognition skill in children with normal development and cochlear implant. Fifty students with normal hearing and 50 students with cochlear implant aged 5-7 years participated in this study. Children educated in the preschool, the first and second grades. Children with normal development were matched based on age, gender, and grade of education with cochlear implant. Two components of working memory including phonological loop and central executive were compared between two groups. Phonological loop assessed by nonword repetition task and forward digit span. To assess central executive component backward digit span was used. The developmental trend was studied in children with normal development and cochlear implant as well. The effect of age at implantation in children with cochlear implants on components of working memory was investigated. There are significant differences between children with normal development and cochlear implant in all tasks that assess working memory (p memory between different grades showed significant differences both in children with normal development and in children with cochlear implant (p implied that children with cochlear implant may experience difficulties in working memory. Therefore, these children have problems in encoding, practicing, and repeating phonological units. The results also suggested working memory develops when the child grows up. In cochlear implant children, with decreasing age at implantation and increasing their experience in perceiving sound, working memory skills improved. Copyright © 2014 Elsevier

  14. Ranking of risk significant components for the Davis-Besse Component Cooling Water System

    International Nuclear Information System (INIS)

    Seniuk, P.J.

    1994-01-01

    Utilities that run nuclear power plants are responsible for testing pumps and valves, as specified by the American Society of Mechanical Engineers (ASME) that are required for safe shutdown, mitigating the consequences of an accident, and maintaining the plant in a safe condition. These inservice components are tested according to ASME Codes, either the earlier requirements of the ASME Boiler and Pressure Vessel Code, Section XI, or the more recent requirements of the ASME Operation and Maintenance Code, Section IST. These codes dictate test techniques and frequencies regardless of the component failure rate or significance of failure consequences. A probabilistic risk assessment or probabilistic safety assessment may be used to evaluate the component importance for inservice test (IST) risk ranking, which is a combination of failure rate and failure consequences. Resources for component testing during the normal quarterly verification test or postmaintenance test are expensive. Normal quarterly testing may cause component unavailability. Outage testing may increase outage cost with no real benefit. This paper identifies the importance ranking of risk significant components in the Davis-Besse component cooling water system. Identifying the ranking of these risk significant IST components adds technical insight for developing the appropriate test technique and test frequency

  15. SASSYS-1 balance-of-plant component models for an integrated plant response

    International Nuclear Information System (INIS)

    Ku, J.-Y.

    1989-01-01

    Models of power plant heat transfer components and rotating machinery have been added to the balance-of-plant model in the SASSYS-1 liquid metal reactor systems analysis code. This work is part of a continuing effort in plant network simulation based on the general mathematical models developed. The models described in this paper extend the scope of the balance-of-plant model to handle non-adiabatic conditions along flow paths. While the mass and momentum equations remain the same, the energy equation now contains a heat source term due to energy transfer across the flow boundary or to work done through a shaft. The heat source term is treated fully explicitly. In addition, the equation of state is rewritten in terms of the quality and separate parameters for each phase. The models are simple enough to run quickly, yet include sufficient detail of dominant plant component characteristics to provide accurate results. 5 refs., 16 figs., 2 tabs

  16. Performance-based maintenance procurement by Dutch housing associations - Working paper ¿

    NARCIS (Netherlands)

    Straub, A.; van Mossel, H.J.

    2005-01-01

    Maintenance works are component services that are part of the final housing service to the tenant. Because main building maintenance works are designed each time again, it can be compared to product (service) development. With different types of cooperation with maintenance contractors, the degree

  17. The interference of flexible working times with the circadian temperature rhythm--a predictor of impairment to health and well-being?

    Science.gov (United States)

    Giebel, Ole; Wirtz, Anna; Nachreiner, Friedhelm

    2008-04-01

    In order to analyze whether impairments to health and well-being under flexible working hours can be predicted from specific characteristics of the work schedules, periodic components in flexible working hours and their interference with the circadian temperature rhythm were analyzed applying univariate and bivariate spectrum analyses to both time series. The resulting indicators of spectral power and phase shift of these components were then related to reported health impairments using regression analysis. The results show that a suppression of both the 24 and the 168 h components in the work schedules (i.e., a lack of periodicity) can be used to predict reported health impairments, and that if there are relatively strong 24 and 168 h components left in the work schedules, their phase difference with the temperature rhythm (as an indicator of the interference between working time and the circadian rhythm) further predicts impairment. The results indicate that the periodicity of working hours and the amount of (circadian) desynchronization induced by flexible work schedules can be used for predicting the impairing effects of flexible work schedules on health and well-being. The results can thus be used for evaluating and designing flexible shift rosters.

  18. A multi-component matrix loop algebra and a unified expression of the multi-component AKNS hierarchy and the multi-component BPT hierarchy

    International Nuclear Information System (INIS)

    Zhang Yufeng

    2005-01-01

    A set of multi-component matrix Lie algebra is constructed, which is devote to obtaining a new loop algebra A-bar M-1 . It follows that an isospectral problem is established. By making use of Tu scheme, a Liouville integrable multi-component hierarchy of soliton equations is generated, which possesses the bi-Hamiltonian structures. As its reduction cases, the multi-component AKNS hierarchy and the formalism of the multi-component BPT hierarchy are given, respectively

  19. High-temperature-structural design and research and development for reactor system components

    International Nuclear Information System (INIS)

    Matsumura, Makoto; Hada, Mikio

    1985-01-01

    The design of reactor system components requires high-temperature-structural design guide with the consideration of the creep effect of materials related to research and development on structural design. The high-temperature-structural design guideline for the fast prototype reactor MONJU has been developed under the active leadership by Power Reactor and Nuclear Fuel Development Corporation and Toshiba has actively participated to this work with responsibility on in-vessel components, performing research and development programs. This paper reports the current status of high-temperature-structural-design-oriented research and development programs and development of analytical system including stress-evaluation program. (author)

  20. Theoretical comparison of light scattering and guided wave coupling in multilayer coated optical components with random interface roughness

    International Nuclear Information System (INIS)

    Elson, J.M.

    1995-01-01

    In this work, we use first-order perturbation theory to calculate and then compare the (1) angular distribution of incident light scattered from a multilayer-coated optical component and (2) the angular distribution of incident light coupled into guided waves supported by the multilayer component. The incident beam is assumed to be a monochromatic plane wave and the scattering/coupling is assumed to be caused by roughness at the interfaces of the optical component. Numerical results show that for high quality (low root mean square roughness) optical components, comparison of the relative amounts of incident energy (1) scattered out of the specular beam and (2) coupled into guided waves are comparable. It follows that the guided wave energy will further contribute to the scattered field via radiative decay or be converted to heat. Thus, this work can help provide an estimation of when guided wave coupling can occur along with the expected magnitude. (orig.)

  1. The Job Demands-Resources model as predictor of work identity and work engagement: A comparative analysis

    Directory of Open Access Journals (Sweden)

    Roslyn De Braine

    2011-05-01

    Research purpose: This study explored possible differences in the Job Demands-Resources model (JD-R as predictor of overall work engagement, dedication only and work-based identity, through comparative predictive analyses. Motivation for the study: This study may shed light on the dedication component of work engagement. Currently no literature indicates that the JD-R model has been used to predict work-based identity. Research design: A census-based survey was conducted amongst a target population of 23134 employees that yielded a sample of 2429 (a response rate of about 10.5%. The Job Demands- Resources scale (JDRS was used to measure job demands and job resources. A work-based identity scale was developed for this study. Work engagement was studied with the Utrecht Work Engagement Scale (UWES. Factor and reliability analyses were conducted on the scales and general multiple regression models were used in the predictive analyses. Main findings: The JD-R model yielded a greater amount of variance in dedication than in work engagement. It, however, yielded the greatest amount of variance in work-based identity, with job resources being its strongest predictor. Practical/managerial implications: Identification and work engagement levels can be improved by managing job resources and demands. Contribution/value-add: This study builds on the literature of the JD-R model by showing that it can be used to predict work-based identity.

  2. Component Reification in Systems Modelling

    DEFF Research Database (Denmark)

    Bendisposto, Jens; Hallerstede, Stefan

    When modelling concurrent or distributed systems in Event-B, we often obtain models where the structure of the connected components is specified by constants. Their behaviour is specified by the non-deterministic choice of event parameters for events that operate on shared variables. From a certain......? These components may still refer to shared variables. Events of these components should not refer to the constants specifying the structure. The non-deterministic choice between these components should not be via parameters. We say the components are reified. We need to address how the reified components get...... reflected into the original model. This reflection should indicate the constraints on how to connect the components....

  3. Resiliency as a component importance measure in network reliability

    International Nuclear Information System (INIS)

    Whitson, John C.; Ramirez-Marquez, Jose Emmanuel

    2009-01-01

    This paper seeks to define the concept of resiliency as a component importance measure related to network reliability. Resiliency can be defined as a composite of: (1) the ability of a network to provide service despite external failures and (2) the time to restore service when in the presence of such failures. Although, Resiliency has been extensively studied in different research areas, this paper will study the specific aspects of quantifiable network resiliency when the network is experiencing potential catastrophic failures from external events and/or influences, and when it is not known a priori which specific components within the network will fail. A formal definition for Category I resiliency is proposed and a step-by-step approach based on Monte-Carlo simulation to calculate it is defined. To illustrate the approach, two-terminal networks with varying degrees of redundancy, have been considered. The results obtained for test networks show that this new quantifiable concept of resiliency provides insight into the performance and topology of the network. Future use for this work could include methods for safeguarding critical network components and optimizing the use of redundancy as a technique to improve network resiliency.

  4. 3-D inelastic analysis methods for hot section components. Volume 2: Advanced special functions models

    Science.gov (United States)

    Wilson, R. B.; Banerjee, P. K.

    1987-01-01

    This Annual Status Report presents the results of work performed during the third year of the 3-D Inelastic Analysis Methods for Hot Sections Components program (NASA Contract NAS3-23697). The objective of the program is to produce a series of computer codes that permit more accurate and efficient three-dimensional analyses of selected hot section components, i.e., combustor liners, turbine blades, and turbine vanes. The computer codes embody a progression of mathematical models and are streamlined to take advantage of geometrical features, loading conditions, and forms of material response that distinguish each group of selected components.

  5. Integrated network for structural integrity monitoring of critical components in nuclear facilities, RIMIS

    International Nuclear Information System (INIS)

    Roth, Maria; Constantinescu, Dan Mihai; Brad, Sebastian; Ducu, Catalin; Malinovschi, Viorel

    2008-01-01

    The round table aims to join specialists working in the research area of the Romanian R and D Institutes and Universities involved in structural integrity assessment of materials, especially those working in the nuclear field, together with the representatives of the end user, the Cernavoda NPP. This scientific event will offer the opportunity to disseminate the theoretical, experimental and modelling activities, carried out to date, in the framework of the National Program 'Research of Excellence', Module I 2006-2008, managed by the National Authority for Scientific Research. Entitled 'Integrated Network for Structural Integrity Monitoring of Critical Components in Nuclear Facilities, RIMIS, the project has two main objectives: 1. - to elaborate a procedure applicable to the structural integrity assessment of critical components used in Romanian nuclear facilities (CANDU type Reactor, Hydrogen Isotopes Separation installations); 2. - to integrate the national networking into a similar one of European level, and to enhance the scientific significance of Romanian R and D organisations as well as to increase the contribution in solving major issues of the nuclear field. The topics of the round table will be focused on: 1. Development of a Structural Integrity Assessment Methodology applicable to the nuclear facilities components; 2. Experimental investigation methods and procedures; 3. Numeric simulation of nuclear components behaviour; 4. Further activities to finalize the assessment procedure. Also participations and contributions to sustain the activity in the European Network NULIFE, FP6 will be discussed. (authors)

  6. Raven's matrices and working memory: a dual-task approach.

    Science.gov (United States)

    Rao, K Venkata; Baddeley, Alan

    2013-01-01

    Raven's Matrices Test was developed as a "pure" measure of Spearman's concept of general intelligence, g. Subsequent research has attempted to specify the processes underpinning performance, some relating it to the concept of working memory and proposing a crucial role for the central executive, with the nature of other components currently unclear. Up to this point, virtually all work has been based on correlational analysis of number of correct solutions, sometimes related to possible strategies. We explore the application to this problem of the concurrent task methodology used widely in developing the concept of multicomponent working memory. Participants attempted to solve problems from the matrices under baseline conditions, or accompanied by backward counting or verbal repetition tasks, assumed to disrupt the central executive and phonological loop components of working memory, respectively. As in other uses of this method, number of items correct showed little effect, while solution time measures gave very clear evidence of an important role for the central executive, but no evidence for phonological loop involvement. We conclude that this and related concurrent task techniques hold considerable promise for the analysis of Raven's matrices and potentially for other established psychometric tests.

  7. Orbitofrontal cortex contribution to working memory. N-back ERP study

    International Nuclear Information System (INIS)

    Nakao, Yoshiaki; Tamura, Toshiyo; Kodabashi, Atsushi; Fujimoto, Toshiro; Yarita, Masaru

    2011-01-01

    Remarkable progress in cognitive neuroscience has revealed the involvement of the prefrontal cortex and the orbitofrontal cortex in human working memory, but the orbitofrontal cortex is still one of the least understood regions in the human brain. To elucidate the contribution of the orbitofrontal cortex to human working memory, we studied electroencephalography (EEG) P300 activity in n-back task. We elicited early P3 around 300 ms and late P3 around 360 ms of P300 components in n-back event related potentials (ERP). The amplitudes of the respective peaks changed depending on the working memory load (0-back, 1-back, 2-back, 3-back). We used source analysis to evaluate the orbitofrontal cortex in P3 components. A source model was constructed with the sources seeded from fMRI meta-analysis of n-back task and additional sources in the orbitofrontal cortex and the visual cortex estimated with P100 and late P3 components in the n-back ERP. This source model had more than 99% of GOF (goodness of fit) in n-back ERP. It gave us an insight of brain activity at the positions where sources existed. Early P3 was mainly produced by the dorsolateral prefrontal cortex, the ventrolateral prefrontal cortex, the inferior parietal lobule, the medial posterior parietal and the visual cortex. Late P3 was mainly produced by the medial premotor, the lateral premotor, the frontal pole and the orbitofrontal cortex. The contribution of the frontal pole and the orbitofrontal cortex had peaks around 390 ms which were later than late P3 component. In this study, the method to evaluate the orbitofrontal cortex activity in n-back ERP was provided. Our results elicited the involvement of the orbitofrontal cortex in late P3 component of n-back ERP. (author)

  8. Development of a Versatile Ultrasonic Internal Pipe/Vessel Component Monitor for In-Service Inspection of Nuclear Reactor Components

    Energy Technology Data Exchange (ETDEWEB)

    Searfass, Clifford T. [Structural Integrity Associates, Inc., State College, PA (United States); Malinowski, Owen M. [Structural Integrity Associates, Inc., State College, PA (United States); Van Velsor, Jason K. [Structural Integrity Associates, Inc., State College, PA (United States)

    2015-03-22

    The stated goal of this work was to develop a versatile system which could accurately measure vessel and valve internal vibrations and cavitation formation under in-service conditions in nuclear power plants, ultrasonically. The developed technology will benefit the nuclear power generation industry by allowing plant operators to monitor valve and vessel internals during operation. This will help reduce planned outages and plant component failures. During the course of this work, Structural Integrity Associates, Inc. gathered information from industry experts that target vibration amplitudes to be detected should be in the range of 0.001-in to 0.005-in (0.025-mm to 0.127-mm) and target vibration frequency ranges which should be detected were found to be between 0-Hz and 300-Hz. During the performed work, an ultrasonic measuring system was developed which utilized ultrasonic pulse-echo time-of-flight measurements to measure vibration frequency and amplitude. The developed system has been shown to be able to measure vibration amplitudes as low as 0.0008-in (0.020-mm) with vibration frequencies in the range of 17-Hz to 1000-Hz. Therefore, the developed system was able to meet the industry needs for vibration measurement. The developed ultrasonic system was also to be able to measure cavitation formation by monitoring the received ultrasonic time- and frequency-domain signals. This work also demonstrated the survivability of commercially available probes at temperatures up to 300-F for several weeks.

  9. Atomistic simulations of the formation of -component dislocation loops in α-zirconium

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Cong, E-mail: dai.cong@queensu.ca; Balogh, Levente; Yao, Zhongwen; Daymond, Mark R., E-mail: mark.daymond@queensu.ca

    2016-09-15

    The formation of -component dislocation loops in α-Zr is believed to be responsible for the breakaway irradiation growth experimentally observed under high irradiation fluences. However, while -loop growth is well described by existing models, the atomic mechanisms responsible for the nucleation of -component dislocation loops are still not clear. In the present work, both interstitial and vacancy -type dislocation loops are initially equilibrated at different temperatures. Cascades simulations in the vicinity of the -type loops are then performed by selecting an atom as the primary knock-on atoms (PKAs) with different kinetic energies, using molecular dynamics simulations. No -component dislocation loop was formed in cascades simulations with a 10 keV PKA, but -component interstitial loops were observed after the interaction between discontinuous 50 keV PKAs and pre-existing -type interstitial loops. The comparisons of cascades simulations in volumes having pre-existing -type interstitial and vacancy loops suggest that the reaction between the PKAs and -type interstitial loops is responsible for the formation of -component interstitial loops.

  10. The Plastic Surgeon at Work and Play: Surgeon Health, Practice Stress, and Work-Home Balance.

    Science.gov (United States)

    Bentz, Michael L

    2016-10-01

    Plastic surgeon wellness encompasses physical and mental health, considered in the context of practice stress. In addition, the challenges of work-home balance can lead to substantial negative impact on the surgeon, family, staff, and patients. The data-driven impact of each of these three components with personal vignettes, both individually and collectively, is presented by Michael Bentz, MD as the 2016 presidential address of American Association of Plastic Surgeons.

  11. Component design for LMFBR's

    International Nuclear Information System (INIS)

    Fillnow, R.H.; France, L.L.; Zerinvary, M.C.; Fox, R.O.

    1975-01-01

    Just as FFTF has prototype components to confirm their design, FFTF is serving as a prototype for the design of the commercial LMFBR's. Design and manufacture of critical components for the FFTF system have been accomplished primarily using vendors with little or no previous experience in supplying components for high temperature sodium systems. The exposure of these suppliers, and through them a multitude of subcontractors, to the requirements of this program has been a necessary and significant step in preparing American industry for the task of supplying the large mechanical components required for commercial LMFBR's

  12. Component Composition Using Feature Models

    DEFF Research Database (Denmark)

    Eichberg, Michael; Klose, Karl; Mitschke, Ralf

    2010-01-01

    interface description languages. If this variability is relevant when selecting a matching component then human interaction is required to decide which components can be bound. We propose to use feature models for making this variability explicit and (re-)enabling automatic component binding. In our...... approach, feature models are one part of service specifications. This enables to declaratively specify which service variant is provided by a component. By referring to a service's variation points, a component that requires a specific service can list the requirements on the desired variant. Using...... these specifications, a component environment can then determine if a binding of the components exists that satisfies all requirements. The prototypical environment Columbus demonstrates the feasibility of the approach....

  13. Measures of component importance in repairable multistate systems—a numerical study

    International Nuclear Information System (INIS)

    Natvig, Bent; Huseby, Arne B.; Reistadbakk, Mads O.

    2011-01-01

    Dynamic and stationary measures of importance of a component in a repairable multistate system are an important part of reliability. For multistate systems little has been published until now on such measures even in the nonrepairable case. According to the Barlow–Proschan type measures a component is important if there is a high probability that a change in the component state causes a change in whether or not the system state is above a given state. On the other hand, the Natvig type measures focus on how a change in the component state affects the expected system uptime and downtime relative to the given system state. In the present paper we first review these measures which can be estimated using advanced simulation methods. Extending earlier work from the binary to the multistate case, a numerical study of these measures is then given for two three component systems, a bridge system and also applied to an offshore oil and gas production system. In the multistate case the importance of a component is calculated separately for each component state. Thus it may happen that a component is very important at one state, and less important, or even irrelevant at another. Unified measures combining the importances for all component states can be obtained by adding up the importance measures for each individual state. According to these unified measures a component can be important relative to a given system state but not to another. It can be seen that if the distributions of the total component times spent in the non-complete failure states for the multistate system and the component lifetimes for the binary system are identical, the Barlow–Proschan measure to the lowest system state simply reduces to the binary version of the measure. The extended Natvig measure, however, does not have this property. This indicates that the latter measure captures more information about the system. - Highlights: ► The paper discusses measures of component importance in

  14. Modality and domain specific components in auditory and visual working memory tasks.

    Science.gov (United States)

    Lehnert, Günther; Zimmer, Hubert D

    2008-03-01

    In the tripartite model of working memory (WM) it is postulated that a unique part system-the visuo-spatial sketchpad (VSSP)-processes non-verbal content. Due to behavioral and neurophysiological findings, the VSSP was later subdivided into visual object and visual spatial processing, the former representing objects' appearance and the latter spatial information. This distinction is well supported. However, a challenge to this model is the question how spatial information from non-visual sensory modalities, for example the auditory one, is processed. Only a few studies so far have directly compared visual and auditory spatial WM. They suggest that the distinction of two processing domains--one for object and one for spatial information--also holds true for auditory WM, but that only a part of the processes is modality specific. We propose that processing in the object domain (the item's appearance) is modality specific, while spatial WM as well as object-location binding relies on modality general processes.

  15. Technology Acceptance and User Experience: A Review of the Experiential Component in HCI

    DEFF Research Database (Denmark)

    Hornbæk, Kasper; Hertzum, Morten

    2017-01-01

    Understanding the mechanisms that shape the adoption and use of information technology is central to human-computer interaction. Two accounts are particularly vocal about these mechanisms, namely the technology acceptance model (TAM) and work on user experience (UX) models. In this study we review...... 37 papers in the overlap between TAM and UX models to explore the experiential component of human-computer interactions. The models provide rich insights about what constructs influence the experiential component of human-computer interactions and about how these constructs are related. For example...

  16. The Improved Methods of Critical Component Classification for the SSCs of New NPP

    International Nuclear Information System (INIS)

    Lee, Sang Dae; Yeom, Dong Un; Hyun, Jin Woo

    2010-01-01

    Functional Importance Determination (FID) process classifies the components of a plant into four groups: Critical A, Critical B, Minor and No Impact. The output of FID can be used as the decision-making tool for maintenance work priority and the input data for preventive maintenance implementation. FID applied to new Nuclear Power Plant (NPP) can be accomplished by utilizing the function analysis results and safety significance determination results of Maintenance Rule (MR) program. Using Shin-Kori NPP as an example, this paper proposes the advanced critical component classification methods for FID utilizing MR scoping results

  17. Computer-aided process planning in prismatic shape die components based on Standard for the Exchange of Product model data

    Directory of Open Access Journals (Sweden)

    Awais Ahmad Khan

    2015-11-01

    Full Text Available Insufficient technologies made good integration between the die components in design, process planning, and manufacturing impossible in the past few years. Nowadays, the advanced technologies based on Standard for the Exchange of Product model data are making it possible. This article discusses the three main steps for achieving the complete process planning for prismatic parts of the die components. These three steps are data extraction, feature recognition, and process planning. The proposed computer-aided process planning system works as part of an integrated system to cover the process planning of any prismatic part die component. The system is built using Visual Basic with EWDraw system for visualizing the Standard for the Exchange of Product model data file. The system works successfully and can cover any type of sheet metal die components. The case study discussed in this article is taken from a large design of progressive die.

  18. Self-assembly kinetics of microscale components: A parametric evaluation

    Science.gov (United States)

    Carballo, Jose M.

    The goal of the present work is to develop, and evaluate a parametric model of a basic microscale Self-Assembly (SA) interaction that provides scaling predictions of process rates as a function of key process variables. At the microscale, assembly by "grasp and release" is generally challenging. Recent research efforts have proposed adapting nanoscale self-assembly (SA) processes to the microscale. SA offers the potential for reduced equipment cost and increased throughput by harnessing attractive forces (most commonly, capillary) to spontaneously assemble components. However, there are challenges for implementing microscale SA as a commercial process. The existing lack of design tools prevents simple process optimization. Previous efforts have characterized a specific aspect of the SA process. However, the existing microscale SA models do not characterize the inter-component interactions. All existing models have simplified the outcome of SA interactions as an experimentally-derived value specific to a particular configuration, instead of evaluating it outcome as a function of component level parameters (such as speed, geometry, bonding energy and direction). The present study parameterizes the outcome of interactions, and evaluates the effect of key parameters. The present work closes the gap between existing microscale SA models to add a key piece towards a complete design tool for general microscale SA process modeling. First, this work proposes a simple model for defining the probability of assembly of basic SA interactions. A basic SA interaction is defined as the event where a single part arrives on an assembly site. The model describes the probability of assembly as a function of kinetic energy, binding energy, orientation and incidence angle for the component and the assembly site. Secondly, an experimental SA system was designed, and implemented to create individual SA interactions while controlling process parameters independently. SA experiments

  19. Development of IPRO-ZONE to Determine Component Failure Modes Affected by a Fire Event

    International Nuclear Information System (INIS)

    Kang, Dae Il; Han, Sang Hoon

    2010-01-01

    A Fire PSA requires a PSA analyst to select internal initiating events and to determine component failure modes for fire occurrence event of each fire compartment. The component failure modes caused by a fire depend on the several factors. These factors are whether components and their relating equipment and cables are located at fire initiation and propagation compartments or not, fire effects on control and power cables for components and their relating equipment, designed failure modes of component, success criteria in a PSA model, etc. Up to the present, a PSA analyst has been manually determining component failure modes based on criteria mentioned above. This task is one of the difficult works required for fire PSA expertise. In addition, since it requires much information, a fire PSA analyst may have difficulty in maintaining consistency for determining the component failure modes and documentation for them. After determining the component failure modes, internal PSA basic events corresponding to the component failure modes are selected and fire events are modeled for the selected basic events if required. KAERI has been developing the IPRO-ZONE (interface program for constructing zone effect table) to determine component failure modes affected by a fire, to select the internal PSA basic events, and to generate fire events to be modeled. In this paper, we introduce the overview of the IPRO-ZONE and approaches for determining component failure modes implemented in the IPRO-ZONE

  20. Working Memory and Binding in Sentence Recall

    Science.gov (United States)

    Baddeley, A. D.; Hitch, G. J.; Allen, R. J.

    2009-01-01

    A series of experiments explored whether chunking in short-term memory for verbal materials depends on attentionally limited executive processes. Secondary tasks were used to disrupt components of working memory and chunking was indexed by the sentence superiority effect, whereby immediate recall is better for sentences than word lists. To…

  1. ANOVA-principal component analysis and ANOVA-simultaneous component analysis: a comparison.

    NARCIS (Netherlands)

    Zwanenburg, G.; Hoefsloot, H.C.J.; Westerhuis, J.A.; Jansen, J.J.; Smilde, A.K.

    2011-01-01

    ANOVA-simultaneous component analysis (ASCA) is a recently developed tool to analyze multivariate data. In this paper, we enhance the explorative capability of ASCA by introducing a projection of the observations on the principal component subspace to visualize the variation among the measurements.

  2. Development of high performance scientific components for interoperability of computing packages

    Energy Technology Data Exchange (ETDEWEB)

    Gulabani, Teena Pratap [Iowa State Univ., Ames, IA (United States)

    2008-01-01

    Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achieved by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.

  3. Electrophysiological Evidence for a Sensory Recruitment Model of Somatosensory Working Memory.

    Science.gov (United States)

    Katus, Tobias; Grubert, Anna; Eimer, Martin

    2015-12-01

    Sensory recruitment models of working memory assume that information storage is mediated by the same cortical areas that are responsible for the perceptual processing of sensory signals. To test this assumption, we measured somatosensory event-related brain potentials (ERPs) during a tactile delayed match-to-sample task. Participants memorized a tactile sample set at one task-relevant hand to compare it with a subsequent test set on the same hand. During the retention period, a sustained negativity (tactile contralateral delay activity, tCDA) was elicited over primary somatosensory cortex contralateral to the relevant hand. The amplitude of this component increased with memory load and was sensitive to individual limitations in memory capacity, suggesting that the tCDA reflects the maintenance of tactile information in somatosensory working memory. The tCDA was preceded by a transient negativity (N2cc component) with a similar contralateral scalp distribution, which is likely to reflect selection of task-relevant tactile stimuli at the encoding stage. The temporal sequence of N2cc and tCDA components mirrors previous observations from ERP studies of working memory in vision. The finding that the sustained somatosensory delay period activity varies as a function of memory load supports a sensory recruitment model for spatial working memory in touch. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  4. Quality of life, work ability and other important indicators of women's occupational health.

    Science.gov (United States)

    Tavakoli-Fard, Negah; Mortazavi, Seyed-Alireza; Kuhpayehzadeh, Jalil; Nojomi, Marzieh

    2016-01-01

    Work ability may be considered as an important aspect of well-being and health status. One of the most important factors in association with work ability is health-related quality of life (HRQoL). The aim of this study has been to determine the association between work ability, individual characteristics and HRQoL of female workers. The design of this study has been cross-sectional. The work ability index (WAI) and Short-Form General Health Survey (SF-12) questionnaires were used to collect data. Three hundred and twenty female workers were selected from food supplier factories in Karaj. One-way analysis of variance, Pearson's correlation analysis, independent sample t-test and multiple linear regression methods were used to analyze data. Mean (M) and standard deviation (SD) of the WAI stood at 35.02 and 5.57, respectively. The categories of the WAI for women being as follows: 8.8% poor, 62% moderate, 25.4% good and 3.7% excellent. Mean±SD for the physical component summary (PCS) and mental component summary (MCS) of quality of life was 58.84±11.12 and 57.45±9.94, respectively. There was a positive significant association between the PCS and MCS with the WAI (p = 0.0001). Workers with higher education had a better work ability (p = 0.002) and shift-work workers had a worse work ability (p = 0.03). Work ability of majority of women was moderate. Considering mean age of studied women (27.6 years old), this work ability is not satisfactory. Physical and mental components of the HRQoL were the important factors associated with work ability. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  5. Alternative Fuels Data Center: How Do Fuel Cell Electric Vehicles Work

    Science.gov (United States)

    vehicles. Hydrogen car image Key Components of a Hydrogen Fuel Cell Electric Car Battery (auxiliary): In an Using Hydrogen? Fuel Cell Electric Vehicles Work Using Hydrogen? to someone by E-mail Share Alternative Fuels Data Center: How Do Fuel Cell Electric Vehicles Work Using Hydrogen? on Facebook Tweet about

  6. Components in models of learning: Different operationalisations and relations between components

    Directory of Open Access Journals (Sweden)

    Mirkov Snežana

    2013-01-01

    Full Text Available This paper provides the presentation of different operationalisations of components in different models of learning. Special emphasis is on the empirical verifications of relations between components. Starting from the research of congruence between learning motives and strategies, underlying the general model of school learning that comprises different approaches to learning, we have analyzed the empirical verifications of factor structure of instruments containing the scales of motives and learning strategies corresponding to these motives. Considering the problems in the conceptualization of the achievement approach to learning, we have discussed the ways of operational sing the goal orientations and exploring their role in using learning strategies, especially within the model of the regulation of constructive learning processes. This model has served as the basis for researching learning styles that are the combination of a large number of components. Complex relations between the components point to the need for further investigation of the constructs involved in various models. We have discussed the findings and implications of the studies of relations between the components involved in different models, especially between learning motives/goals and learning strategies. We have analyzed the role of regulation in the learning process, whose elaboration, as indicated by empirical findings, can contribute to a more precise operationalisation of certain learning components. [Projekat Ministarstva nauke Republike Srbije, br. 47008: Unapređivanje kvaliteta i dostupnosti obrazovanja u procesima modernizacije Srbije i br. 179034: Od podsticanja inicijative, saradnje i stvaralaštva u obrazovanju do novih uloga i identiteta u društvu

  7. Caffeine, extraversion and working memory.

    Science.gov (United States)

    Smith, Andrew P

    2013-01-01

    Research has shown that extraverts performing a working memory task benefit more from caffeine than do introverts. The present study aimed to replicate this and extend our knowledge by using a lower dose of caffeine (65 mg) and a range of tasks related to different components of working memory. In addition, tasks assessing psychomotor speed and the encoding of new information were included to determine whether caffeine-extraversion interactions were restricted to working memory tasks. A double-blind design was used, with 128 participants being randomly assigned to caffeinated or de-caffeinated coffee conditions. The results showed that caffeine interacted with extraversion in the predicted direction for serial recall and running memory tasks. Caffeine improved simple reaction time and the speed of encoding of new information, effects which were not modified by extraversion. These results suggest possible biological mechanisms underlying effects of caffeine on cognitive performance.

  8. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S [CISE SpA, Milan (Italy); Crudeli, R [ENEL SpA, Milan (Italy)

    1999-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  9. Small punch creep test: A promising methodology for high temperature plant components life evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Tettamanti, S. [CISE SpA, Milan (Italy); Crudeli, R. [ENEL SpA, Milan (Italy)

    1998-12-31

    CISE and ENEL are involved for years in a miniaturization creep methodology project to obtain similar non-destructive test with the same standard creep test reliability. The goal can be reached with `Small punch creep test` that collect all the requested characteristics; quasi nondestructive disk specimens extracted both on external or internal side of components, than accurately machined and tested on little and cheap apparatus. CISE has developed complete creep small punch procedure that involved peculiar test facility and correlation`s law comparable with the more diffused isostress methodology for residual life evaluation on ex-serviced high temperature plant components. The aim of this work is to obtain a simple and immediately applicable relationship useful for plant maintenance managing. More added work is need to validate the Small Punch methodology and for relationship calibration on most diffusion high temperature structural materials. First obtained results on a comparative work on ASTM A355 P12 ex-serviced pipe material are presented joint with a description of the Small Punch apparatus realized in CISE. (orig.) 6 refs.

  10. Examining Structural Relationships between Work Engagement, Organizational Procedural Justice, Knowledge Sharing, and Innovative Work Behavior for Sustainable Organizations

    Directory of Open Access Journals (Sweden)

    Woocheol Kim

    2017-02-01

    Full Text Available Despite the importance of the human/social dimension of organizational sustainability, this area of scholastic endeavor has received relatively little attention when compared to the economic and environmental dimensions of sustainability. On the basis of social exchange theory, this study posited the important role that employee work engagement is a key component for improving human performance for organizational sustainability. In order to do so, it suggests the important role that employee work engagement has on the relationships among various factors in the organization, including organizational procedural justice, knowledge sharing, and innovative work behaviors. A total of 400 complete responses from full-time employees in Korean organizations were used for the purpose of data analysis with structural equation modeling (SEM. The results demonstrated that organizational procedural justice is positively related with employee work engagement, knowledge sharing, and innovative work behavior. In addition, work engagement enhances employee knowledge sharing and innovative work behavior, and knowledge sharing enhances innovative work behavior. With regard to the mechanisms of these relationships, work engagement and knowledge sharing acted as significant mediators. Based on the findings, we suggested relevant research implications and recommendations for future research on sustainable organizations.

  11. Reactor component automatic grapple

    International Nuclear Information System (INIS)

    Greenaway, P.R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)

  12. Impact of Working Memory Training Targeting the Central Executive on Kindergarteners' Numerical Skills

    Science.gov (United States)

    Honoré, Nastasya; Noël, Marie-Pascale

    2017-01-01

    Working memory capacities are associated with mathematical development. Many studies have tried to improve working memory abilities through training. Furthermore, the central executive has been shown to be the component of working memory, which is the most strongly related to numerical and arithmetical skills. Therefore, we developed a training…

  13. Pilot studies of management of ageing of nuclear power plant instrumentation and control components

    International Nuclear Information System (INIS)

    Burnay, S.G.; Simola, K.; Kossilov, A.; Pachner, J.

    1993-01-01

    This paper describes pilot studies which have been implemented to study the aging behavior of safety related component parts of nuclear power plants. In 1989 the IAEA initiated work on pilot studies related to the aging of such components. Four components were identified for study. They are the primary nozzle of a reactor vessel; a motor operated isolating valve; the concrete containment building; and instrumentation and control cables within the containment facility. The study was begun with phase 1 efforts directed toward understanding the aging process, and methods for monitoring and minimizing the effects of aging. Phase 2 efforts are directed toward aging studies, documentation of the ideas put forward, and research to answer questions identified in phase 1. This paper describes progress made on two of these components, namely the motor operated isolation valves, and in-containment I ampersand C cables

  14. A metacognitive visuospatial working memory training for children

    Directory of Open Access Journals (Sweden)

    Sara Caviola

    2009-10-01

    Full Text Available The paper studies whether visuospatial working memory (VSWM and, specifically, recall of sequential-spatial information, can be improved by metacognitive training. Twenty-two fourth-grade children were involved in seven sessions of sequential-spatial memory training, while twenty-four children attended lessons given by their teacher. The posttraining evaluation demonstrated a specific improvement of performances in the Corsi blocks task, considered a sequential-spatial working memory task. However, no benefits of training were observed in either a verbal working memory task or a simultaneous-spatial working memory task. The results have important theoretical implications, in the study of VSWM components, and educational implications, in catering for children with specific VSWM impairments.

  15. Social-Economic Status, Work Conditions and Inequalities in Self-Reported Health in Ukrainian Working-age Population: Evidence from the ESS

    DEFF Research Database (Denmark)

    Mazhak, Iryna

    -age respondents. The data were analyzed using the IBM SPSS22 (logistic regression was used to assess the effect of the variables on poor SRH). Such variables as, socio-economic status, economic activity, work conditions were created by using principal component analysis.A binomial logistic regression...

  16. Size distribution measurements and chemical analysis of aerosol components

    Energy Technology Data Exchange (ETDEWEB)

    Pakkanen, T.A.

    1995-12-31

    The principal aims of this work were to improve the existing methods for size distribution measurements and to draw conclusions about atmospheric and in-stack aerosol chemistry and physics by utilizing size distributions of various aerosol components measured. A sample dissolution with dilute nitric acid in an ultrasonic bath and subsequent graphite furnace atomic absorption spectrometric analysis was found to result in low blank values and good recoveries for several elements in atmospheric fine particle size fractions below 2 {mu}m of equivalent aerodynamic particle diameter (EAD). Furthermore, it turned out that a substantial amount of analyses associated with insoluble material could be recovered since suspensions were formed. The size distribution measurements of in-stack combustion aerosols indicated two modal size distributions for most components measured. The existence of the fine particle mode suggests that a substantial fraction of such elements with two modal size distributions may vaporize and nucleate during the combustion process. In southern Norway, size distributions of atmospheric aerosol components usually exhibited one or two fine particle modes and one or two coarse particle modes. Atmospheric relative humidity values higher than 80% resulted in significant increase of the mass median diameters of the droplet mode. Important local and/or regional sources of As, Br, I, K, Mn, Pb, Sb, Si and Zn were found to exist in southern Norway. The existence of these sources was reflected in the corresponding size distributions determined, and was utilized in the development of a source identification method based on size distribution data. On the Finnish south coast, atmospheric coarse particle nitrate was found to be formed mostly through an atmospheric reaction of nitric acid with existing coarse particle sea salt but reactions and/or adsorption of nitric acid with soil derived particles also occurred. Chloride was depleted when acidic species reacted

  17. Using Social Media components in business world – SMEs perspective

    OpenAIRE

    Robu, Maximilian

    2013-01-01

    SMEs have a major contribution to economic growth and job creation. In a dynamic world, marked by very rapid technological and economic changes, they must adapt and seek new ways to improve business. Social Media seems to provide tools to improve the work, especially on the sales and marketing. This paper is to capture how social media components are used in SMEs, also highlighting some of the advantages of them.

  18. Mechanical integration of the detector components for the CBM silicon tracking system

    Energy Technology Data Exchange (ETDEWEB)

    Vasylyev, Oleg; Niebur, Wolfgang [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Collaboration: CBM-Collaboration

    2016-07-01

    The Compressed Baryonic Matter experiment (CBM) at FAIR is designed to explore the QCD phase diagram in the region of high net-baryon densities. The central detector component, the Silicon Tracking System (STS) is based on double-sided micro-strip sensors. In order to achieve the physics performance, the detector mechanical structures should be developed taking into account the requirements of the CBM experiments: low material budget, high radiation environment, interaction rates, aperture for the silicon tracking, detector segmentation and mounting precision. A functional plan of the STS and its surrounding structural components is being worked out from which the STS system shape is derived and the power and cooling needs, the connector space requirements, life span of components and installation/repair aspects are determined. The mechanical integration is at the point of finalizing the design stage and moving towards production readiness. This contribution shows the current processing state of the following engineering tasks: construction space definition, carbon ladder shape and manufacturability, beam-pipe feedthrough structure, prototype construction, cable routing and modeling of the electronic components.

  19. Additive Manufacturing Thermal Performance Testing of Single Channel GRCop-84 SLM Components

    Science.gov (United States)

    Garcia, Chance P.; Cross, Matthew

    2014-01-01

    The surface finish found on components manufactured by sinter laser manufacturing (SLM) is rougher (0.013 - 0.0006 inches) than parts made using traditional fabrication methods. Internal features and passages built into SLM components do not readily allow for roughness reduction processes. Alternatively, engineering literature suggests that the roughness of a surface can enhance thermal performance within a pressure drop regime. To further investigate the thermal performance of SLM fabricated pieces, several GRCop-84 SLM single channel components were tested using a thermal conduction rig at MSFC. A 20 kW power source running at 25% duty cycle and 25% power level applied heat to each component while varying water flow rates between 2.1 - 6.2 gallons/min (GPM) at a supply pressure of 550 to 700 psi. Each test was allowed to reach quasi-steady state conditions where pressure, temperature, and thermal imaging data were recorded. Presented in this work are the heat transfer responses compared to a traditional machined OHFC Copper test section. An analytical thermal model was constructed to anchor theoretical models with the empirical data.

  20. Hot laboratory design on the basis of standardized components

    International Nuclear Information System (INIS)

    Cadrot, J.

    1976-01-01

    The paper describes the principal effects on hot laboratory design brought about over the last 15 years by the use of standardized components developed jointly with the CEA and the industrial associates of AFINE. After a rapid survey of the various advantages of standardization, the author turns to the specific case of a laboratory producing mixed plutonium and uranium oxide fuels, giving a brief description of the glove-boxes and ancillary equipment. He then deals with the design of an isotope production laboratory. The basic component is the DR 200 standard cell, which permits the civil engineering work to be effected on modular principles. Use of a safety-flow pressure regulating valve makes possible pneumatic automation of the production-cell internals. A substantial gain in output is the result. In the next section the paper refers to a pilot facility for irradiated fuel studies, and describes the components used, which require taking into account the high activities and intense radiations encountered in studies of this type. The author then demonstrates the flexibility with which standardized components can be adapted to different uses, thus solving many distinct problems, an example of which is represented by a semi-hot box for handling up to 100g of americium-241. Finally, the paper offers a rapid summary of the effects of standardization at the various stages concerned, from initial design to the commissioning of a hot laboratory. (author)

  1. Work process of nursing professors 1

    Science.gov (United States)

    Parra Giordano, Denisse; Felli, Vanda Elisa Andres

    2017-01-01

    ABSTRACT Objective: to analyze the work process of nursing professors. Method: descriptive, exploratory and qualitative study, developed with a focus on critical epidemiology, carried out at a School of Nursing in Chile. The research subjects consist of 17 nursing professors, with whom individual semi-structured interviews were carried out and nine participated in a focus group. The Ethics Committee approved this study. Results: 88.2% were female, mean age of 42 years, 47% were married, 94% were Chilean, average length of service in the institution of 2.8 years, and 23.5% had a master’s degree. Regarding the work process, the students were the work object, the tools used were the knowledge and the experience as a nurse, and the work environment was considered good. Regarding the form of work organization, 76% have a 44-hour workweek, the wage was considered inadequate and the workload was higher than foreseen in the contract. The dialectic of the nursing work process is evidenced, demonstrating the contradiction between the low wages and labor overload and the narratives reporting a good work environment, personal fulfillment and transcendence that goes far beyond work. Conclusions: the work process allows describing the work components of the nursing professors, which are consistent with the results of the literature and show the dialectic of the nursing work process. PMID:29211193

  2. Imaging axial and radial electric field components in dielectric targets under plasma exposure

    NARCIS (Netherlands)

    Slikboer, E.T.; Sobota, A.; Guaitella, O.; Garcia-Caurel, E.

    2018-01-01

    This work presents new ways to investigate the individual electric field components in a dielectric target induced by a non thermal atmospheric pressure plasma jet. Mueller polarimetry is applied to investigate electro-optic crystals under exposure of guided ionization waves produced by a plasma

  3. Qualification, commissioning and in situ monitoring of high heat flux plasma facing components

    Energy Technology Data Exchange (ETDEWEB)

    Escourbiac, F. [Association Euratom-CEA, CEA/DSM/DRFC, CEA/Cadarache, F-13108 Saint Paul Lez Durance (France)], E-mail: frederic.escourbiac@cea.fr; Durocher, A.; Grosman, A.; Cismondi, F.; Courtois, X.; Farjon, J.L.; Schlosser, J. [Association Euratom-CEA, CEA/DSM/DRFC, CEA/Cadarache, F-13108 Saint Paul Lez Durance (France); Merola, M.; Tivey, R. [ITER Team, CEA/Cadarache, F-13108 Saint Paul Lez Durance (France)

    2007-10-15

    Up-to-date development of actively cooled high heat flux (HHF) plasma facing components (PFC) prototypes only allows reduced margins with regards to the ITER thermal requirements. Additionally, perfect quality cannot be ensured along series manufacturing: the presence of flaws which impair the heat transfer capability of the component, in particular at the interface armour/heat sink appears to be statistically unavoidable. In order to ensure a successful series production, a qualification methodology of actively cooled high heat flux plasma facing components is proposed. Secondly, advanced non-destructive techniques developed for HHF PFC commissioning are detailed with definition of acceptance criteria. Finally, innovative diagnostics for in situ monitoring during plasma operations or tokamak shutdowns are investigated in order to prevent immediate damage (safety monitoring); or evaluate component degradation (health monitoring). This work takes into account the relevance to Tore Supra, and is applied to W7X and ITER Divertor HHF PFC.

  4. Qualification, commissioning and in situ monitoring of high heat flux plasma facing components

    International Nuclear Information System (INIS)

    Escourbiac, F.; Durocher, A.; Grosman, A.; Cismondi, F.; Courtois, X.; Farjon, J.L.; Schlosser, J.; Merola, M.; Tivey, R.

    2007-01-01

    Up-to-date development of actively cooled high heat flux (HHF) plasma facing components (PFC) prototypes only allows reduced margins with regards to the ITER thermal requirements. Additionally, perfect quality cannot be ensured along series manufacturing: the presence of flaws which impair the heat transfer capability of the component, in particular at the interface armour/heat sink appears to be statistically unavoidable. In order to ensure a successful series production, a qualification methodology of actively cooled high heat flux plasma facing components is proposed. Secondly, advanced non-destructive techniques developed for HHF PFC commissioning are detailed with definition of acceptance criteria. Finally, innovative diagnostics for in situ monitoring during plasma operations or tokamak shutdowns are investigated in order to prevent immediate damage (safety monitoring); or evaluate component degradation (health monitoring). This work takes into account the relevance to Tore Supra, and is applied to W7X and ITER Divertor HHF PFC

  5. A Principle Component Analysis of Galaxy Properties from a Large, Gas-Selected Sample

    Directory of Open Access Journals (Sweden)

    Yu-Yen Chang

    2012-01-01

    concluded that this is in conflict with the CDM model. Considering the importance of the issue, we reinvestigate the problem using the principal component analysis on a fivefold larger sample and additional near-infrared data. We use databases from the Arecibo Legacy Fast Arecibo L-band Feed Array Survey for the gas properties, the Sloan Digital Sky Survey for the optical properties, and the Two Micron All Sky Survey for the near-infrared properties. We confirm that the parameters are indeed correlated where a single physical parameter can explain 83% of the variations. When color (g-i is included, the first component still dominates but it develops a second principal component. In addition, the near-infrared color (i-J shows an obvious second principal component that might provide evidence of the complex old star formation. Based on our data, we suggest that it is premature to pronounce the failure of the CDM model and it motivates more theoretical work.

  6. The main trends of work on ageing and lifetime management of NPP

    International Nuclear Information System (INIS)

    Dragunov, Yu.

    1994-01-01

    The main trends of work on aging and lifetime management of nuclear power plants(NPP) in Russia are described including Russian research programs on NPP components lifetime assurance, technical assistance program for CIS, measures for life extension of reactor pressure vessels, steam generator collectors and components for advances reactor plants. Figs and tabs

  7. Insomnia in shift work.

    Science.gov (United States)

    Vallières, Annie; Azaiez, Aïda; Moreau, Vincent; LeBlanc, Mélanie; Morin, Charles M

    2014-12-01

    Shift work disorder involves insomnia and/or excessive sleepiness associated with the work schedule. The present study examined the impact of insomnia on the perceived physical and psychological health of adults working on night and rotating shift schedules compared to day workers. A total of 418 adults (51% women, mean age 41.4 years), including 51 night workers, 158 rotating shift workers, and 209 day workers were selected from an epidemiological study. An algorithm was used to classify each participant of the two groups (working night or rotating shifts) according to the presence or absence of insomnia symptoms. Each of these individuals was paired with a day worker according to gender, age, and income. Participants completed several questionnaires measuring sleep, health, and psychological variables. Night and rotating shift workers with insomnia presented a sleep profile similar to that of day workers with insomnia. Sleep time was more strongly related to insomnia than to shift work per se. Participants with insomnia in the three groups complained of anxiety, depression, and fatigue, and reported consuming equal amounts of sleep-aid medication. Insomnia also contributed to chronic pain and otorhinolaryngology problems, especially among rotating shift workers. Work productivity and absenteeism were more strongly related to insomnia. The present study highlights insomnia as an important component of the sleep difficulties experienced by shift workers. Insomnia may exacerbate certain physical and mental health problems of shift workers, and impair their quality of life. Copyright © 2014 Elsevier B.V. All rights reserved.

  8. Test and evaluation of semiconductor components in mixed field radiation monitoring

    International Nuclear Information System (INIS)

    Cardenas, Jose Patricio N.; Madi Filho, Tufic; Rodrigues, Leticia L.C.

    2009-01-01

    Silicon components have found extensive use in nuclear spectroscopy and counting, as described in many articles in the last three decades. These devices have found utility in radiation dosimetry because a diode, for instance, produces a current approximately 18000 times higher than any ionization chamber of equal sensitive volume. This reduces stringent requirements from the electronics used to amplify or integrate the current and / or allows approaching the ideal detector point for the mapping of radiation fields. For better performance, in the case of diodes, they are normally used with high inverse polarity to obtain a deeper barrier, less noise and shorter transit time. The aim of this work was the evaluation of these semiconductor components for application in ionizing radiation fields monitoring, in nuclear research reactors and radiotherapy facilities, for radiation protection and health physics purposes. Experimental configurations to analyze the performance of commercial semiconductors, such as silicon PIN Photodiodes and Silicon Surface Barrier Detectors, were developed and the performance of three different configurations of charge preamplifier with silicon components was also studied. Components were evaluated for application as neutron detectors, using some types of radiators (converters). The radiation response of these silicon components to neutron fields from nuclear research reactors IEA-R1 and IPEN-MB1 (thermal, epithermal and fast neutrons), from beam holes, experimental halls and AmBe neutron sources in laboratory was investigated. (author)

  9. The 'Pole Nucleaire Bourgogne' for developing the nuclear components industry

    International Nuclear Information System (INIS)

    Kottmann, G.

    2012-01-01

    The 'Pole Nucleaire Bourgogne' (PNB) is a high-technology and heavy industries cluster in Burgundy with an international calling. It aims at innovating, educating and federating in order to place the French nuclear industry in a leading position. PNB gathers 76 small-, and medium-sized enterprises, most of them operating in the metal sector, in design and in the control/measuring sector. The aim of PNB is to make enterprises work and cooperate on specific topics according to their sectors of activities and their skills. PNB has identified 3 domains of strategical innovations: -) ecological manufacturing and durability of heavy components, -) controls for high performance components, and -) maintenance and dismantling techniques in hostile environments. The various industry sectors represented in PNB allows a cross-fertilization between high-tech industries (aeronautics, energy, transportation)

  10. The working memory Ponzo illusion: Involuntary integration of visuospatial information stored in visual working memory.

    Science.gov (United States)

    Shen, Mowei; Xu, Haokui; Zhang, Haihang; Shui, Rende; Zhang, Meng; Zhou, Jifan

    2015-08-01

    Visual working memory (VWM) has been traditionally viewed as a mental structure subsequent to visual perception that stores the final output of perceptual processing. However, VWM has recently been emphasized as a critical component of online perception, providing storage for the intermediate perceptual representations produced during visual processing. This interactive view holds the core assumption that VWM is not the terminus of perceptual processing; the stored visual information rather continues to undergo perceptual processing if necessary. The current study tests this assumption, demonstrating an example of involuntary integration of the VWM content, by creating the Ponzo illusion in VWM: when the Ponzo illusion figure was divided into its individual components and sequentially encoded into VWM, the temporally separated components were involuntarily integrated, leading to the distorted length perception of the two horizontal lines. This VWM Ponzo illusion was replicated when the figure components were presented in different combinations and presentation order. The magnitude of the illusion was significantly correlated between VWM and perceptual versions of the Ponzo illusion. These results suggest that the information integration underling the VWM Ponzo illusion is constrained by the laws of visual perception and similarly affected by the common individual factors that govern its perception. Thus, our findings provide compelling evidence that VWM functions as a buffer serving perceptual processes at early stages. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Creep properties of 20% cold-worked Hastelloy XR

    International Nuclear Information System (INIS)

    Kurata, Y.

    1996-01-01

    The creep properties of Hastelloy XR, in solution-treated and in 20% cold-worked conditions, were studied at 800, 900 and 1000 C. At 800 C, the steady-state creep rate and rupture ductility decrease, while rupture life increases after cold work to 20%. Although the steady-state creep rate and ductility also decrease at 900 C, the beneficial effect on rupture life disappears. Cold work to 20% enhan ces creep resistance of this alloy at 800 and 900 C due to a high density of dislocations introduced by the cold work. Rupture life of the 20% cold-worked alloy becomes shorter and the steady-state creep rate larger at 1000 C during creep of the 20% cold-worked alloy. It is emphasized that these cold work effects should be taken into consideration in design and operation of high-temperature structural components of high-temperature gas-cooled reactors. (orig.)

  12. An estimation method of system failure frequency using both structure and component failure data

    International Nuclear Information System (INIS)

    Takaragi, Kazuo; Sasaki, Ryoichi; Shingai, Sadanori; Tominaga, Kenji

    1981-01-01

    In recent years, the importance of reliability analysis is appreciated for large systems such as nuclear power plants. A reliability analysis method is described for a whole system, using structure failure data for its main working subsystem and component failure data for its safety protection subsystem. The subsystem named main working system operates normally, and the subsystem named safety protection system acts as standby or protection. Thus the main and the protection systems are given mutually different failure data; then, between the subsystems, there exists common mode failure, i.e. the component failure affecting the reliability of both two. A calculation formula for sytem failure frequency is first derived. Then, a calculation method with digraphs is proposed for conditional system failure probability. Finally the results of numerical calculation are given for the purpose of explanation. (J.P.N.)

  13. Consideration of microstructure evolution and residual stress measurement near severe worked surface using high energy x-ray

    International Nuclear Information System (INIS)

    Hashimoto, Tadafumi; Mochizuki, Masahito; Shobu, Takahisa

    2012-01-01

    It is necessary to establish a measurement method that can evaluate accurate stress on the surface. However, the microstructure evolution takes place near the surface due to severe plastic deformation, since structural members have been superpositioned a lot of working processes to complete. As well known, a plane stress can't be assumed on the severe worked surface. Therefore we have been proposed the measurement method that can be measured the in-depth distribution of residual stress components by using high energy X-ray from a synchrotron radiation source. There is the combination of the constant penetration depth method and tri-axial stress analysis. Measurements were performed by diffraction planes for the orientation parameter Γ=0.25 of which elastic constants are nearly equal to the mechanical one. The stress components obtained must be converted to the stress components in real space by using optimization technique, since it corresponds to the weighted average stress components associated with the attenuation of X-ray in materials. The predicted stress components distribution agrees very well with the corrected one which was measured by the conventional removal method. To verify the availability of the proposed method, thermal aging variation of residual stress components on the severe worked surface under elevated temperature was investigated using specimen superpositioned working processes (i.e., welding, machining, peening). It is clarified that the residual stress components increase with thermal aging, using the diffraction planes in hard elastic constants to the bulk. This result suggests that the thermal stability of residual stress has the dependence of the diffraction plane. (author)

  14. Simple Analysis of the university counsellors’ daily work and planning

    Institute of Scientific and Technical Information of China (English)

    Chen Juan

    2014-01-01

    Summary:Counsellor act as the backbone effect in students’ ideological and political work, who specialized in students’Ideological education and behavior management, and they are important component in teaching staff.

  15. National Ignition Facility and managing location, component, and state

    Energy Technology Data Exchange (ETDEWEB)

    Foxworthy, Cemil, E-mail: foxworthy3@llnl.gov [Lawrence Livermore National Laboratory, Livermore, CA (United States); Fung, Tracy; Beeler, Rich; Li, Joyce; Dugorepec, Jasna; Chang, Cathy [Lawrence Livermore National Laboratory, Livermore, CA (United States)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer NIF in comprised of over 100k serialized parts that must be tracked and maintained. Black-Right-Pointing-Pointer We discuss a web-based integrated parts management system designed for NIF. Black-Right-Pointing-Pointer The parts database stores associated calibration data with effective dates. Black-Right-Pointing-Pointer The system interfaces with the NIF control system and performance models. Black-Right-Pointing-Pointer Work activity (Permits, Problem Logs, Work Orders) are managed by the system. - Abstract: The National Ignition Facility (NIF) at the Lawrence Livermore National Laboratory is a stadium-sized facility that contains a 192-beam, 1.8-MJ, 500-TW, ultraviolet laser system coupled with a 10-m diameter target chamber. There are over 6200 Line Replaceable Units (LRUs) comprised of more than 104,000 serialized parts that make up the NIF. Each LRU is a modular unit typically composed of a mechanical housing, laser optics (glass, lenses, or mirrors), and utilities. To date, there are more than 120,000 data sets created to characterize the attributes of these parts. Greater than 51,000 Work Permits have been issued to install, maintain, and troubleshoot the components. One integrated system is used to manage these data, and more. The Location Component and State (LoCoS) system is a web application built using Java Enterprise Edition technologies and is accessed by over 1200 users. It is either directly or indirectly involved with each aspect of NIF work activity, and interfaces with ten external systems including the Integrated Computer Control System (ICCS) and the Laser Performance Operations Model (LPOM). Besides providing business functionality, LoCoS also acts as the NIF enterprise service bus. In this role, numerous integration approaches had to be adopted including: file exchange, database sharing, queuing, and web services in order to accommodate various business, technical, and security requirements

  16. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  17. Working memory limitations in children with severe language impairment.

    Science.gov (United States)

    van Daal, John; Verhoeven, Ludo; van Leeuwe, Jan; van Balkom, Hans

    2008-01-01

    In the present study, the relations of various aspects of working memory to various aspects of language problems in a clinical sample of 97 Dutch speaking 5-year-old children with severe language problems were studied. The working memory and language abilities of the children were examined using an extensive battery of tests. Working memory was operationalized according to the model of Baddeley. Confirmative factor analyses revealed three memory factors: phonological, visual and central executive. Language was construed as a multifactorial construct, and confirmative factor analyses revealed four factors: lexical-semantic abilities, phonological abilities, syntactic abilities and speech production abilities. Moderate to high correlations were found between the memory and language factors. Structural equation modelling was used to further explore the relations between the different factors. Phonological memory was found to predict phonological abilities; central-executive memory predicted lexical-semantic abilities; and visual memory predicted speech production abilities. Phonological abilities also predicted syntactic abilities. Both the theoretical and clinical implications of the findings are discussed. The reader will be introduced to the concepts of multifactorial components of working memory as well as language impairment. Secondly the reader will recognize that working memory and language impairment factors can be related. Particular emphasis will be placed on phonological memory, central-executive memory and visual memory and their possible prediction of specific components of language impairment.

  18. FORMING THE READINESS OF UNIVERSITY TEACHERS TO WORK IN POSTGRADUATE PEDAGOGICAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Iryna Trubavina

    2017-04-01

    Full Text Available The problem of teaching adult students in the system of postgraduate pedagogical education should be considered not only from the point of view of the students, but also from the point of teachers’ view. Training is a two-way process. In this article national studies on this problem are initially summarized. The methodology of research of postgraduate pedagogical education is singled out. These are such scientific approaches as synergetics and andragogics. The author proves the need for universities to train teachers specially for interaction with adult students who already work as teachers in schools, have very much motivation for study, their own personal and professional experience, may be older than their university teachers, require subject-subject communication. This all affects the specifics of teaching and requires a different willingness to work with such students and correspondent courses at universities. The article is devoted to forming modern university teachers’ readiness to work in postgraduate pedagogical education. The features of such readiness content are first determined by the author as the content, value and operational components of teacher readiness for work. This gives the article practical significance. The results can be extended to the training of all teachers of higher pedagogical educational institutions, that indicate the social significance of the article. The originality of the article is determining the specific content of the components of the teachers’ readiness to work in postgraduate pedagogical education. Forming the teacher’s readiness for training adult students in the system of postgraduate teacher education should include knowledge, skills and values of work. The prospects for research are building and implementing a model of forming the university teachers’ readiness for such work on the basis of andragogy and synergetics, taking into account the specified content of the components of teacher

  19. APS beamline standard components handbook

    International Nuclear Information System (INIS)

    Kuzay, T.M.

    1992-01-01

    It is clear that most Advanced Photon Source (APS) Collaborative Access Team (CAT) members would like to concentrate on designing specialized equipment related to their scientific programs rather than on routine or standard beamline components. Thus, an effort is in progress at the APS to identify standard and modular components of APS beamlines. Identifying standard components is a nontrivial task because these components should support diverse beamline objectives. To assist with this effort, the APS has obtained advice and help from a Beamline Standardization and Modularization Committee consisting of experts in beamline design, construction, and operation. The staff of the Experimental Facilities Division identified various components thought to be standard items for beamlines, regardless of the specific scientific objective of a particular beamline. A generic beamline layout formed the basis for this identification. This layout is based on a double-crystal monochromator as the first optical element, with the possibility of other elements to follow. Pre-engineering designs were then made of the identified standard components. The Beamline Standardization and Modularization Committee has reviewed these designs and provided very useful input regarding the specifications of these components. We realize that there will be other configurations that may require special or modified components. This Handbook in its current version (1.1) contains descriptions, specifications, and pre-engineering design drawings of these standard components. In the future, the APS plans to add engineering drawings of identified standard beamline components. Use of standard components should result in major cost reductions for CATs in the areas of beamline design and construction

  20. Hot gas path component

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward

    2017-09-12

    Various embodiments of the disclosure include a turbomachine component. and methods of forming such a component. Some embodiments include a turbomachine component including: a first portion including at least one of a stainless steel or an alloy steel; and a second portion joined with the first portion, the second portion including a nickel alloy including an arced cooling feature extending therethrough, the second portion having a thermal expansion coefficient substantially similar to a thermal expansion coefficient of the first portion, wherein the arced cooling feature is located within the second portion to direct a portion of a coolant to a leakage area of the turbomachine component.

  1. Exploration of a 'double-jeopardy' hypothesis within working memory profiles for children with specific language impairment.

    Science.gov (United States)

    Briscoe, J; Rankin, P M

    2009-01-01

    Children with specific language impairment (SLI) often experience difficulties in the recall and repetition of verbal information. Archibald and Gathercole (2006) suggested that children with SLI are vulnerable across two separate components of a tripartite model of working memory (Baddeley and Hitch 1974). However, the hierarchical relationship between the 'slave' systems (temporary storage) and the central executive components places a particular challenge for interpreting working memory profiles within a tripartite model. This study aimed to examine whether a 'double-jeopardy' assumption is compatible with a hierarchical relationship between the phonological loop and central executive components of the working memory model in children with SLI. If a strong double-jeopardy assumption is valid for children with SLI, it was predicted that raw scores of working memory tests thought to tap phonological loop and central executive components of tripartite working memory would be lower than the scores of children matched for chronological age and those of children matched for language level, according to independent sources of constraint. In contrast, a hierarchical relationship would imply that a weakness in a slave component of working memory (the phonological loop) would also constrain performance on tests tapping a super-ordinate component (central executive). This locus of constraint would predict that scores of children with SLI on working memory tests that tap the central executive would be weaker relative to the scores of chronological age-matched controls only. Seven subtests of the Working Memory Test Battery for Children (Digit recall, Word recall, Non-word recall, Word matching, Listening recall, Backwards digit recall and Block recall; Pickering and Gathercole 2001) were administered to 14 children with SLI recruited via language resource bases and specialist schools, as well as two control groups matched on chronological age and vocabulary level

  2. Statistical analysis of manufacturing defects on fatigue life of wind turbine casted Component

    DEFF Research Database (Denmark)

    Rafsanjani, Hesam Mirzaei; Sørensen, John Dalsgaard; Mukherjee, Krishnendu

    2014-01-01

    Wind turbine components experience heavily variable loads during its lifetime and fatigue failure is a main failure mode of casted components during their design working life. The fatigue life is highly dependent on the microstructure (grain size and graphite form and size), number, type, location...... and size of defects in the casted components and is therefore rather uncertain and needs to be described by stochastic models. Uncertainties related to such defects influence prediction of the fatigue strengths and are therefore important in modelling and assessment of the reliability of wind turbine...... for the fatigue life, namely LogNormal and Weibull distributions. The statistical analyses are performed using the Maximum Likelihood Method and the statistical uncertainty is estimated. Further, stochastic models for the fatigue life obtained from the statistical analyses are used for illustration to assess...

  3. Structural assessment of aerospace components using image processing algorithms and Finite Element models

    DEFF Research Database (Denmark)

    Stamatelos, Dimtrios; Kappatos, Vassilios

    2017-01-01

    Purpose – This paper presents the development of an advanced structural assessment approach for aerospace components (metallic and composites). This work focuses on developing an automatic image processing methodology based on Non Destructive Testing (NDT) data and numerical models, for predicting...... the residual strength of these components. Design/methodology/approach – An image processing algorithm, based on the threshold method, has been developed to process and quantify the geometric characteristics of damages. Then, a parametric Finite Element (FE) model of the damaged component is developed based...... on the inputs acquired from the image processing algorithm. The analysis of the metallic structures is employing the Extended FE Method (XFEM), while for the composite structures the Cohesive Zone Model (CZM) technique with Progressive Damage Modelling (PDM) is used. Findings – The numerical analyses...

  4. Ageing management program for reactor components in HANARO

    International Nuclear Information System (INIS)

    Cho, Yeong-Garp; Wu, Sang-Ik; Lee, Jung-Hee; Ryu, Jeong-Soo; Park, Yong-Chul; Wu, Jong-Sup; Jun, Byung Jin

    2003-01-01

    straightness of the inner shell. We are developing more remote tools for the removal of the reactor components that interfere with the measurement work. The wear of fuel channels is also one of the interesting components being monitored regarding flow-induced vibration of the fuel assemblies. (author)

  5. Identification of energy storage rate components. Theoretical and experimental approach

    International Nuclear Information System (INIS)

    Oliferuk, W; Maj, M

    2010-01-01

    The subject of the present paper is decomposition of energy storage rate into terms related to different mode of deformation. The stored energy is the change in internal energy due to plastic deformation after specimen unloading. Hence, this energy describes the state of the cold-worked material. Whereas, the ratio of the stored energy increment to the appropriate increment of plastic work is the measure of energy conversion process. This ratio is called the energy storage rate. Experimental results show that the energy storage rate is dependent on plastic strain. This dependence is influenced by different microscopic deformation mechanisms. It has been shown that the energy storage rate can be presented as a sum of particular components. Each of them is related to the separate internal microscopic mechanism. Two of the components are identified. One of them is the storage rate of statistically stored dislocation energy related to uniform deformation. Another one is connected with non-uniform deformation at the grain level. It is the storage rate of the long range stresses energy and geometrically necessary dislocation energy. The maximum of energy storage rate, that appeared at initial stage of plastic deformation is discussed in terms of internal micro-stresses.

  6. The relationship between work stress and work ability among power supply workers in Guangdong, China: a cross-sectional study.

    Science.gov (United States)

    Li, Hualiang; Liu, Zhiting; Liu, Runzhong; Li, Li; Lin, Aihua

    2016-02-06

    Faced with the challenge of population aging, a prolonged working life is increasingly important in today's society. Maintaining work ability of employees is one of the effective ways to cope with the challenges to sustainability of the workforce presented by population aging. Researchers have shown ongoing interest in exploring the determinants of restricted work ability. The aim of this study was to evaluate the effects of work stress on work ability among power supply workers in Guangdong, China. A cross-sectional study was conducted among power supply workers during August 2014 to September 2014. A total of 805 subjects were enrolled in the study. Work stress was assessed by the Job Content Questionnaire and the Effort Reward Imbalance Questionnaire. Work ability was assessed by the Work Ability Index (WAI). The structural equation model was applied to test the relationship between different work stress components and work ability simultaneously using the Job Demands-Resources model as a framework. Job resources (measured by job control, reward and social support) were positively and directly associated with work ability (β = 0.70, P work ability was also statistically significant (β = -0.09, P = 0.030). In addition, the findings also supported previous studies in that job demands were correlated with job resources (β = -0.26, P work ability.

  7. Whatever Works: A Test of the "Division of Labor" Component of Uses and Gratifications Theory.

    Science.gov (United States)

    Carvalho, John

    The 1974 book, "The Uses of Mass Communication: Current Perspectives on Gratifications Research" introduced the concept of a "division of labor"--that certain media work better than others in meeting audience gratifications. Since the division of labor concept has not been subjected to empirical testing, a study elaborated an…

  8. GCS component development cycle

    Science.gov (United States)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  9. Component resolved bleaching study in natural calcium fluoride using CW-OSL, LM-OSL and residual TL glow curves after bleaching

    International Nuclear Information System (INIS)

    Angeli, Vasiliki; Polymeris, George S.; Sfampa, Ioanna K.; Tsirliganis, Nestor C.; Kitis, George

    2017-01-01

    Natural calcium fluoride has been commonly used as thermoluminescence (TL) dosimeter due to its high luminescence intensity. The aim of this work includes attempting a correlation between specific TL glow curves after bleaching and components of linearly modulated optically stimulated luminescence (LM-OSL) as well as continuous wave OSL (CW-OSL). A component resolved analysis was applied to both integrated intensity of the RTL glow curves and all OSL decay curves, by using a Computerized Glow-Curve De-convolution (CGCD) procedure. All CW-OSL and LM-OSL components are correlated to the decay components of the integrated RTL signal, apart from two RTL components which cannot be directly correlated with either LM-OSL or CW-OSL component. The unique, stringent criterion for this correlation deals with the value of the decay constant λ of each bleaching component. There is only one, unique bleaching component present in all three luminescence entities which were the subject of the present study, indicating that each TL trap yields at least three different bleaching components; different TL traps can indicate bleaching components with similar values. According to the data of the present work each RTL bleaching component receives electrons from at least two peaks. The results of the present study strongly suggest that the traps that contribute to TL and OSL are the same. - Highlights: • A component resolved bleaching study was attempted to CaF_2:N in terms of CW-OSL, LM-OSL and RTL. • Bleaching decay constants originating from different TL peaks yield overlapping values. • Three to five individual components were used in order to describe the bleaching behavior in all luminescence entities. • There is only one, unique bleaching component present in all three luminescence entities.

  10. Elements of Success: WorkReady Philadelphia Program Year 2011-2012 Report

    Science.gov (United States)

    Philadelphia Youth Network, 2012

    2012-01-01

    What does it take to deliver WorkReady Philadelphia's high-quality career-connected programming? In short, it's all about the "elements"--those essential components of the system that combine to produce success for young people. This 2011-12 WorkReady report reinforces this theme by using visual aspects of the "Periodic Table of…

  11. Automatic component calibration and error diagnostics for model-based accelerator control. Phase I final report

    International Nuclear Information System (INIS)

    Carl Stern; Martin Lee

    1999-01-01

    Phase I work studied the feasibility of developing software for automatic component calibration and error correction in beamline optics models. A prototype application was developed that corrects quadrupole field strength errors in beamline models

  12. Automatic component calibration and error diagnostics for model-based accelerator control. Phase I final report

    CERN Document Server

    Carl-Stern

    1999-01-01

    Phase I work studied the feasibility of developing software for automatic component calibration and error correction in beamline optics models. A prototype application was developed that corrects quadrupole field strength errors in beamline models.

  13. Applying of component system development in object methodology

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    -oriented methodology (Arlo, Neust, 2007, (Kan, Müller, 2005, (​​Krutch, 2003 for problem domains with double-layer process logic. There is indicated an integration method, based on a certain meta-model (Applying of the Component system Development in object Methodology and leading to the component system formation. The mentioned meta-model is divided into partial workflows that are located in different stages of a classic object process-based methodology. Into account there are taken the consistency of the input and output artifacts in working practices of the meta-model and mentioned object methodology. This paper focuses on static component systems that are starting to explore dynamic and mobile component systems.In addition, in the contribution the component system is understood as a specific system, for its system properties and basic terms notation being used a set and graph and system algebra.

  14. Assessment of working memory in patients with mesial temporal lobe epilepsy associated with unilateral hippocampal sclerosis.

    Science.gov (United States)

    Tudesco, Ivanda de Souza Silva; Vaz, Leonardo José; Mantoan, Marcele Araújo Silva; Belzunces, Erich; Noffs, Maria Helena; Caboclo, Luís Otávio Sales Ferreira; Yacubian, Elza Márcia Targas; Sakamoto, Américo Ceiki; Bueno, Orlando Francisco Amodeo

    2010-07-01

    The aim of the present study was to investigate whether working memory is impaired in mesial temporal lobe epilepsy with hippocampal sclerosis (MTLE-HS), a controversial and largely unexplored matter. Twenty subjects with left MTLE-HS, 19 with right MTLE-HS, and 21 control right-handed subjects underwent neuropsychological assessment of episodic and semantic memory, executive functions, and specific working memory components. Left and right epileptogenic foci resulted in impairment of verbal and nonverbal episodic memory (verbal memory deficit greater in left MTLE-HS than in right MTLE-HS). In addition, patients with left MTLE-HS were impaired in learning paired associates, verbal fluency, and Trail Making. No differences were seen in the tests carried out to evaluate the working memory components (except visuospatial short-term memory in right MTLE-HS). In this study we did not detect reliable working memory impairment in patients with MTLE-HS with either a left or right focus in most tasks considered as tests of working memory components. Copyright 2010 Elsevier Inc. All rights reserved.

  15. Towards happiness: Experiences of work-role fit, meaningfulness and work engagement of industrial/organisational psychologists in South Africa

    Directory of Open Access Journals (Sweden)

    Llewellyn E. van Zyl

    2010-10-01

    Research purpose: The aim of this study was to determine how I/O psychologists experience the meaning of their work and to investigate the relationships between their experiences of work-role fit, meaning of work, psychological meaningfulness and work engagement, utilising the happiness framework proposed by Seligman (2002. Motivation for the study: I/O psychologists spend more than 88% of their working day with people, and they are primary role models for happiness in the workplace. Information about their work engagement and experiences of meaning is therefore needed. Research design, approach and method: A survey design was used. A convenience sample (n = 106 was taken of I/O psychologists in South Africa. A biographical questionnaire, the Work-Role Fit Scale, the Work-Life Questionnaire, the Psychological Meaningfulness Scale, the Work Engagement Scale and a survey measuring the actual and desired time spent on six broad categories of work were administered. Main findings: Work-role fit predicted psychological meaningfulness and work engagement. The calling orientation to work predicted both psychological meaningfulness and work engagement. Work-role fit mediated the relationship between the meaning of work and psychological meaningfulness. Work-role fit partially mediated the relationship between a calling orientation to work and work engagement. Practical implications: A calling orientation to work should be fostered in I/O psychologists because it contributes to experiences of work-role fit, psychological meaningfulness and work engagement. Contribution/value-add: The results of this study contribute to scientific knowledge about work-role fit, engagement and meaning as components of happiness of I/O psychologists.

  16. Development of a charge-sensitive preamplifier using commercially available components

    International Nuclear Information System (INIS)

    Fagionato, Esnel A.; Genezini, Frederico A.; Zahn, Guilherme S.

    2013-01-01

    Signals produced in radiation detectors are very fast and with low intensity; these signals are not able to directly excite a regular MCA multichannel circuit, so some sort of amplification is needed. This work proposes the construction of a nuclear detector preamplifier using commercially available components that are not specifically designed for the use in nuclear instrumentation. The preamplifier was then tested and its performance was compared to that of an Ortec 142 preamplifier. (author)

  17. The effects of exercise program on burnout and metabolic syndrome components in banking and insurance workers.

    Science.gov (United States)

    Tsai, Han Hui; Yeh, Ching Ying; Su, Chien Tien; Chen, Chiou Jong; Peng, Shu Mei; Chen, Ruey Yu

    2013-01-01

    To explore the effectiveness of exercise program for banking and insurance workers and clarify the association between exercise, burnout, and metabolic syndrome components. In the process of the study, a practicable worksite exercise program was developed for bank and insurance enterprises. A three-month (12-wk) exercise course was conducted, and its benefits evaluated. Levels of burnout and metabolic syndrome components were analyzed after exercise intervention. After intervention, the indicators of burnout and metabolic syndrome components were significantly improved in both low and high intensity groups, and the improvement were expressed in reduction of waist circumference, systolic blood pressure, person burnout and work-related burnout. A dose-response of burnouts and metabolic syndrome components with exercise intensity are shown (psyndrome components were independently associated with burnout and exercise intensity in the crude model. After adjustment for potential confounders, waist circumference and systolic blood pressure differences showed significant associations with exercise intensity (pburnouts and metabolic syndrome components.

  18. Inservice inspection of heavy water plants - a tool in assessing damage to components and life extension

    International Nuclear Information System (INIS)

    Subramanian, C.V.; Thavasimuthu, M.; Bhattacharys, D.K.; Baldev Raj

    1994-01-01

    Any system and its components are expected to give trouble free service over a certain period of time known as life time. The life time is estimated during the design stage. To achieve the design life, certain level of quality are to be defined and this quality has to be worked into the components by proper fabrication processes and their compliance with quality are to be checked. In addition, one has to guard against initiation or propagation of defects which may occur due to normal and abnormal service conditions. Non-destructive test (NDT) techniques are widely used for finding the health of the component. The role of NDT extends from the production stage to the entire life period of the system. This paper highlights the periodic in-service inspection (ISI) carried out on various components of the Heavy Water Plants (HWP) in India in assessing the integrity of the components and predicting the life of the components. (author). 3 refs., 4 figs

  19. Process parameter optimization based on principal components analysis during machining of hardened steel

    Directory of Open Access Journals (Sweden)

    Suryakant B. Chandgude

    2015-09-01

    Full Text Available The optimum selection of process parameters has played an important role for improving the surface finish, minimizing tool wear, increasing material removal rate and reducing machining time of any machining process. In this paper, optimum parameters while machining AISI D2 hardened steel using solid carbide TiAlN coated end mill has been investigated. For optimization of process parameters along with multiple quality characteristics, principal components analysis method has been adopted in this work. The confirmation experiments have revealed that to improve performance of cutting; principal components analysis method would be a useful tool.

  20. Building Evidence of Validity: The Relation between Work Values, Interests, Personality, and Personal Values

    Science.gov (United States)

    Leuty, Melanie E.; Hansen, Jo-Ida C.

    2013-01-01

    The current study used work values components (WVC) to examine the relationship between work values, vocational interests, personality, and personal values. Most intercorrelations between work values and other constructs were in the small effect range. Overall correlations between scale scores provided evidence of convergent and discriminant…