WorldWideScience

Sample records for validated measures exist

  1. Modeling and validation of existing VAV system components

    Energy Technology Data Exchange (ETDEWEB)

    Nassif, N.; Kajl, S.; Sabourin, R. [Ecole de Technologie Superieure, Montreal, PQ (Canada)

    2004-07-01

    The optimization of supervisory control strategies and local-loop controllers can improve the performance of HVAC (heating, ventilating, air-conditioning) systems. In this study, the component model of the fan, the damper and the cooling coil were developed and validated against monitored data of an existing variable air volume (VAV) system installed at Montreal's Ecole de Technologie Superieure. The measured variables that influence energy use in individual HVAC models included: (1) outdoor and return air temperature and relative humidity, (2) supply air and water temperatures, (3) zone airflow rates, (4) supply duct, outlet fan, mixing plenum static pressures, (5) fan speed, and (6) minimum and principal damper and cooling and heating coil valve positions. The additional variables that were considered, but not measured were: (1) fan and outdoor airflow rate, (2) inlet and outlet cooling coil relative humidity, and (3) liquid flow rate through the heating or cooling coils. The paper demonstrates the challenges of the validation process when monitored data of existing VAV systems are used. 7 refs., 11 figs.

  2. Energy Savings Measure Packages. Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Casey, Sean [National Renewable Energy Lab. (NREL), Golden, CO (United States); Booten, Chuck [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-11-01

    This document presents the most cost effective Energy Savings Measure Packages (ESMP) for existing mixed-fuel and all electric homes to achieve 15% and 30% savings for each BetterBuildings grantee location across the United States. These packages are optimized for minimum cost to homeowners for source energy savings given the local climate and prevalent building characteristics (i.e. foundation types). Maximum cost savings are typically found between 30% and 50% energy savings over the reference home; this typically amounts to $300 - $700/year.

  3. Measuring Input Thresholds on an Existing Board

    Science.gov (United States)

    Kuperman, Igor; Gutrich, Daniel G.; Berkun, Andrew C.

    2011-01-01

    A critical PECL (positive emitter-coupled logic) interface to Xilinx interface needed to be changed on an existing flight board. The new Xilinx input interface used a CMOS (complementary metal-oxide semiconductor) type of input, and the driver could meet its thresholds typically, but not in worst-case, according to the data sheet. The previous interface had been based on comparison with an external reference, but the CMOS input is based on comparison with an internal divider from the power supply. A way to measure what the exact input threshold was for this device for 64 inputs on a flight board was needed. The measurement technique allowed an accurate measurement of the voltage required to switch a Xilinx input from high to low for each of the 64 lines, while only probing two of them. Directly driving an external voltage was considered too risky, and tests done on any other unit could not be used to qualify the flight board. The two lines directly probed gave an absolute voltage threshold calibration, while data collected on the remaining 62 lines without probing gave relative measurements that could be used to identify any outliers. The PECL interface was forced to a long-period square wave by driving a saturated square wave into the ADC (analog to digital converter). The active pull-down circuit was turned off, causing each line to rise rapidly and fall slowly according to the input s weak pull-down circuitry. The fall time shows up as a change in the pulse width of the signal ready by the Xilinx. This change in pulse width is a function of capacitance, pulldown current, and input threshold. Capacitance was known from the different trace lengths, plus a gate input capacitance, which is the same for all inputs. The pull-down current is the same for all inputs including the two that are probed directly. The data was combined, and the Excel solver tool was used to find input thresholds for the 62 lines. This was repeated over different supply voltages and

  4. Evaluating Existing and New Validity Evidence for the Academic Motivation Scale

    Science.gov (United States)

    Fairchild, Amanda J.; Horst, S. Jeanne; Finney, Sara J.; Barron, Kenneth E.

    2005-01-01

    The current study evaluates existing and new validity evidence for the Academic Motivation Scale (AMS; Vallerand et al., 1992). We first provide a narrative review synthesizing past research, and then conduct a validity investigation of the scores from the measure. Data analysis using a sample of 1406 American college students provided construct…

  5. Validity and reliability of food security measures.

    Science.gov (United States)

    Cafiero, Carlo; Melgar-Quiñonez, Hugo R; Ballard, Terri J; Kepple, Anne W

    2014-12-01

    This paper reviews some of the existing food security indicators, discussing the validity of the underlying concept and the expected reliability of measures under reasonably feasible conditions. The main objective of the paper is to raise awareness on existing trade-offs between different qualities of possible food security measurement tools that must be taken into account when such tools are proposed for practical application, especially for use within an international monitoring framework. The hope is to provide a timely, useful contribution to the process leading to the definition of a food security goal and the associated monitoring framework within the post-2015 Development Agenda. © 2014 New York Academy of Sciences.

  6. Validation of protein carbonyl measurement

    DEFF Research Database (Denmark)

    Augustyniak, Edyta; Adam, Aisha; Wojdyla, Katarzyna

    2015-01-01

    Protein carbonyls are widely analysed as a measure of protein oxidation. Several different methods exist for their determination. A previous study had described orders of magnitude variance that existed when protein carbonyls were analysed in a single laboratory by ELISA using different commercial...... protein carbonyl analysis across Europe. ELISA and Western blotting techniques detected an increase in protein carbonyl formation between 0 and 5min of UV irradiation irrespective of method used. After irradiation for 15min, less oxidation was detected by half of the laboratories than after 5min...... irradiation. Three of the four ELISA carbonyl results fell within 95% confidence intervals. Likely errors in calculating absolute carbonyl values may be attributed to differences in standardisation. Out of up to 88 proteins identified as containing carbonyl groups after tryptic cleavage of irradiated...

  7. Alternative validation practice of an automated faulting measurement method.

    Science.gov (United States)

    2010-03-08

    A number of states have adopted profiler based systems to automatically measure faulting, : in jointed concrete pavements. However, little published work exists which documents the : validation process used for such automated faulting systems. This p...

  8. On the existence of a minorant of the indefiniteness for the measurement of a position

    International Nuclear Information System (INIS)

    Ferretti, B.

    1984-01-01

    The purpose of this note is to prove, under the hypothesis of validity of: a)the Heisenberg indefiniteness principle, b)Lorentz transformation in a local inertial frame, c)the 'equivalence principle', the existence of a minorant of the indefiniteness for the measurement of a position. 'Planck radius' appears to be such a minorant

  9. The measurement of instrumental ADL: content validity and construct validity

    DEFF Research Database (Denmark)

    Avlund, K; Schultz-Larsen, K; Kreiner, S

    1993-01-01

    do not depend on help. It is also possible to add the items in a valid way. However, to obtain valid IADL-scales, we omitted items that were highly relevant to especially elderly women, such as house-work items. We conclude that the criteria employed for this IADL-measure are somewhat contradictory....... showed that 14 items could be combined into two qualitatively different additive scales. The IADL-measure complies with demands for content validity, distinguishes between what the elderly actually do, and what they are capable of doing, and is a good discriminator among the group of elderly persons who...

  10. Validation of a pre-existing safety climate scale for the Turkish furniture manufacturing industry.

    Science.gov (United States)

    Akyuz, Kadri Cemil; Yildirim, Ibrahim; Gungor, Celal

    2018-03-22

    Understanding the safety climate level is essential to implement a proactive safety program. The objective of this study is to explore the possibility of having a safety climate scale for the Turkish furniture manufacturing industry since there has not been any scale available. The questionnaire recruited 783 subjects. Confirmatory factor analysis (CFA) tested a pre-existing safety scale's fit to the industry. The CFA indicated that the structures of the model present a non-satisfactory fit with the data (χ 2  = 2033.4, df = 314, p ≤ 0.001; root mean square error of approximation = 0.08, normed fit index = 0.65, Tucker-Lewis index = 0.65, comparative fit index = 0.69, parsimony goodness-of-fit index = 0.68). The results suggest that a new scale should be developed and validated to measure the safety climate level in the Turkish furniture manufacturing industry. Due to the hierarchical structure of organizations, future studies should consider a multilevel approach in their exploratory factor analyses while developing a new scale.

  11. Validity of a Measure of Assertiveness

    Science.gov (United States)

    Galassi, John P.; Galassi, Merna D.

    1974-01-01

    This study was concerned with further validation of a measure of assertiveness. Concurrent validity was established for the College Self-Expression Scale using the method of contrasted groups and through correlations of self-and judges' ratings of assertiveness. (Author)

  12. Development and preliminary validation of a leadership competency instrument for existing and emerging allied health professional leaders.

    Science.gov (United States)

    Ang, Hui-Gek; Koh, Jeremy Meng-Yeow; Lee, Jeffrey; Pua, Yong-Hao

    2016-02-19

    No instruments, to our knowledge, exist to assess leadership competency in existing and emerging allied health professional (AHP) leaders. This paper describes the development and preliminary exploration of the psychometric properties of a leadership competency instrument for existing and emerging AHP leaders and examines (i) its factor structure, (ii) its convergent validity with the Leadership Practices Inventory (LPI), and (iii) its discriminative validity in AHPs with different grades. During development, we included 25 items in the AHEAD (Aspiring leaders in Healthcare-Empowering individuals, Achieving excellence, Developing talents) instrument. A cross-sectional study was then conducted in 106 high-potential AHPs from Singapore General Hospital (34 men and 72 women) of different professional grades (49 principal-grade AHPs, 41 senior-grade AHPs, and 16 junior-grade AHPs) who completed both AHEAD and LPI instruments. Exploratory factor analysis was used to test the theoretical structure of AHEAD. Spearman correlation analysis was performed to evaluate the convergent validity of AHEAD with LPI. Using proportional odds regression models, we evaluated the association of grades of AHPs with AHEAD and LPI. To assess discriminative validity, the c-statistics - a measure of discrimination - were derived from these ordinal models. As theorized, factor analysis suggested a two-factor solution, where "skills" and "values" formed separate factors. Internal consistency of AHEAD was excellent (α-values > 0.88). Total and component AHEAD and LPI scores correlated moderately (Spearman ρ-values, 0.37 to 0.58). The c-index for discriminating between AHP grades was higher for AHEAD than for the LPI (0.76 vs. 0.65). The factorial structure of AHEAD was generally supported in our study. AHEAD showed convergent validity with the LPI and outperformed the LPI in terms of discriminative validity. These results provide initial evidence for the use of AHEAD to assess leadership

  13. The Validity of Two Education Requirement Measures

    Science.gov (United States)

    van der Meer, Peter H.

    2006-01-01

    In this paper we investigate the validity of two education requirement measures. This is important because a key part of the ongoing discussion concerning overeducation is about measurement. Thanks to the Dutch Institute for Labour Studies, we have been given a unique opportunity to compare two education requirement measures: first, Huijgen's…

  14. Preliminary Validation of the MATRA-LMR Code Using Existing Sodium-Cooled Experimental Data

    International Nuclear Information System (INIS)

    Choi, Sun Rock; Kim, Sangji

    2014-01-01

    The main objective of the SFR prototype plant is to verify TRU metal fuel performance, reactor operation, and transmutation ability of high-level wastes. The core thermal-hydraulic design is used to ensure the safe fuel performance during the whole plant operation. The fuel design limit is highly dependent on both the maximum cladding temperature and the uncertainties of the design parameters. Therefore, an accurate temperature calculation in each subassembly is highly important to assure a safe and reliable operation of the reactor systems. The current core thermalhydraulic design is mainly performed using the SLTHEN (Steady-State LMR Thermal-Hydraulic Analysis Code Based on ENERGY Model) code, which has been already validated using the existing sodium-cooled experimental data. In addition to the SLTHEN code, a detailed analysis is performed using the MATRA-LMR (Multichannel Analyzer for Transient and steady-state in Rod Array-Liquid Metal Reactor) code. In this work, the MATRA-LMR code is validated for a single subassembly evaluation using the previous experimental data. The MATRA-LMR code has been validated using existing sodium-cooled experimental data. The results demonstrate that the design code appropriately predicts the temperature distributions compared with the experimental values. Major differences are observed in the experiments with the large pin number due to the radial-wise mixing difference

  15. Measuring Outdoor Air Intake Rates into Existing Building

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, William; Sullivan, Douglas; Cohen, Sebastian; Han, Hwataik

    2009-04-16

    Practical and accurate technologies are needed for continuously measuring and controlling outdoor air (OA) intake rates in commercial building heating, ventilating, and air conditioning (HVAC) systems. This project evaluated two new measurement approaches. Laboratory experiments determined that OA flow rates were measurable with errors generally less than 10 percent using electronic air velocity probes installed between OA intake louver blades or at the outlet face of louvers. High accuracy was maintained with OA flow rates as low as 15 percent of the maximum for the louvers. Thus, with this measurement approach HVAC systems do not need separate OA intakes for minimum OA supply. System calibration parameters are required for each unique combination of louver type and velocity sensor location but calibrations are not necessary for each system installation. The research also determined that the accuracy of measuring OA flow rates with velocity probes located in the duct downstream of the intake louver was not improved by installing honeycomb airflow straighteners upstream of the probes. Errors varied with type of upstream louver, were as high as 100 percent, and were often greater than 25 percent. In conclusion, use of electronic air velocity probes between the blades of OA intake louvers or at the outlet face of louvers is a highly promising means of accurately measuring rates of OA flow into HVAC systems. The use of electronic velocity probes downstream of airflow straighteners is less promising, at least with the relatively small OA HVAC inlet systems employed in this research.

  16. Development and validation of a measure of food choice values.

    Science.gov (United States)

    Lyerly, Jordan E; Reeve, Charlie L

    2015-06-01

    Food choice values (FCVs) are factors that individuals consider when deciding which foods to purchase and/or consume. Given the potentially important implications for health, it is critical for researchers to have access to a validated measure of FCV. Though there is an existing measure of FCV, this measure was developed 20 years ago and recent research suggests additional FCVs exist that are not included in this measure. A series of four studies was conducted to develop a new expanded measure of FCV. An eight-factor model of FCV was supported and confirmed. In aggregate, results from the four studies indicate that the measure is content valid, and has internally consistent scales that also demonstrated acceptable temporal stability and convergent validity. In addition, the eight scales of the measures were independent of social desirability, met criteria for measurement invariance across income groups, and predicted dietary intake. The development of this new measure of FCV may be useful for researchers examining FCVs (FCVs) in the future, as well as for use in intervention and prevention efforts targeting dietary choices. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. Pharmacokinetic modeling of gentamicin in treatment of infective endocarditis: Model development and validation of existing models

    Science.gov (United States)

    van der Wijk, Lars; Proost, Johannes H.; Sinha, Bhanu; Touw, Daan J.

    2017-01-01

    Gentamicin shows large variations in half-life and volume of distribution (Vd) within and between individuals. Thus, monitoring and accurately predicting serum levels are required to optimize effectiveness and minimize toxicity. Currently, two population pharmacokinetic models are applied for predicting gentamicin doses in adults. For endocarditis patients the optimal model is unknown. We aimed at: 1) creating an optimal model for endocarditis patients; and 2) assessing whether the endocarditis and existing models can accurately predict serum levels. We performed a retrospective observational two-cohort study: one cohort to parameterize the endocarditis model by iterative two-stage Bayesian analysis, and a second cohort to validate and compare all three models. The Akaike Information Criterion and the weighted sum of squares of the residuals divided by the degrees of freedom were used to select the endocarditis model. Median Prediction Error (MDPE) and Median Absolute Prediction Error (MDAPE) were used to test all models with the validation dataset. We built the endocarditis model based on data from the modeling cohort (65 patients) with a fixed 0.277 L/h/70kg metabolic clearance, 0.698 (±0.358) renal clearance as fraction of creatinine clearance, and Vd 0.312 (±0.076) L/kg corrected lean body mass. External validation with data from 14 validation cohort patients showed a similar predictive power of the endocarditis model (MDPE -1.77%, MDAPE 4.68%) as compared to the intensive-care (MDPE -1.33%, MDAPE 4.37%) and standard (MDPE -0.90%, MDAPE 4.82%) models. All models acceptably predicted pharmacokinetic parameters for gentamicin in endocarditis patients. However, these patients appear to have an increased Vd, similar to intensive care patients. Vd mainly determines the height of peak serum levels, which in turn correlate with bactericidal activity. In order to maintain simplicity, we advise to use the existing intensive-care model in clinical practice to avoid

  18. Pharmacokinetic modeling of gentamicin in treatment of infective endocarditis: Model development and validation of existing models.

    Directory of Open Access Journals (Sweden)

    Anna Gomes

    Full Text Available Gentamicin shows large variations in half-life and volume of distribution (Vd within and between individuals. Thus, monitoring and accurately predicting serum levels are required to optimize effectiveness and minimize toxicity. Currently, two population pharmacokinetic models are applied for predicting gentamicin doses in adults. For endocarditis patients the optimal model is unknown. We aimed at: 1 creating an optimal model for endocarditis patients; and 2 assessing whether the endocarditis and existing models can accurately predict serum levels. We performed a retrospective observational two-cohort study: one cohort to parameterize the endocarditis model by iterative two-stage Bayesian analysis, and a second cohort to validate and compare all three models. The Akaike Information Criterion and the weighted sum of squares of the residuals divided by the degrees of freedom were used to select the endocarditis model. Median Prediction Error (MDPE and Median Absolute Prediction Error (MDAPE were used to test all models with the validation dataset. We built the endocarditis model based on data from the modeling cohort (65 patients with a fixed 0.277 L/h/70kg metabolic clearance, 0.698 (±0.358 renal clearance as fraction of creatinine clearance, and Vd 0.312 (±0.076 L/kg corrected lean body mass. External validation with data from 14 validation cohort patients showed a similar predictive power of the endocarditis model (MDPE -1.77%, MDAPE 4.68% as compared to the intensive-care (MDPE -1.33%, MDAPE 4.37% and standard (MDPE -0.90%, MDAPE 4.82% models. All models acceptably predicted pharmacokinetic parameters for gentamicin in endocarditis patients. However, these patients appear to have an increased Vd, similar to intensive care patients. Vd mainly determines the height of peak serum levels, which in turn correlate with bactericidal activity. In order to maintain simplicity, we advise to use the existing intensive-care model in clinical practice to

  19. Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review

    DEFF Research Database (Denmark)

    Larsen, Camilla Marie; Juul-Kristensen, Birgit; Lund, Hans

    %), with only one study rated as ‘good’. The reliability domain was most often investigated. Fewof the assessment methods in the included studies that had ‘fair’ or ‘good’ measurement properties demonstrated acceptable results for both reliability and validity.ConclusionWe found a substantially larger number......ABSTRACT OARSI Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review Larsen CM1, Juul-Kristensen B1,2 Lund H1,2, Søgaard K11University of Southern Denmark, Institute of Sports Science and Clinical Biomechanics2Institute...... assessment methods have measured the degree of scapular dyskinesis, subjectively by visual evaluation and objectively by measurements of static and dynamic scapular positioning, by either a 3-dimensional electromagnetic device or 2-dimensional clinically applicable methods. Since advanced equipment (i.e. 3D...

  20. Measure Guideline: Selecting Ventilation Systems for Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Robb [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-02-01

    This document addresses adding -or improving - mechanical ventilation systems to existing homes. The purpose of ventilation is to remove contaminants from homes, and this report discusses where, when, and how much ventilation is appropriate in a home, including some discussion of relevant codes and standards. Advantages, disadvantages, and approximate costs of various system types are presented along with general guidelines for implementing the systems in homes. CARB intends for this document to be useful to decision makers and contractors implementing ventilation systems in homes. Choosing the "best" system is not always straightforward; selecting a system involves balancing performance, efficiency, cost, required maintenance, and several other factors. It is the intent of this document to assist contractors in making more informed decisions when selecting systems. Ventilation is an integral part of a high-performance home. With more air-sealed envelopes, a mechanical means of removing contaminants is critical for indoor environmental quality and building durability.

  1. Measure Guideline: Selecting Ventilation Systems for Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, R. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2014-02-01

    This report, developed by Building America research team CARB, addresses adding or improving mechanical ventilation systems to existing homes. The goal of this report is to assist decision makers and contractors in making informed decisions when selecting ventilation systems for homes. With more air-sealed envelopes, a mechanical means of removing contaminants is critical for indoor environmental quality and building durability. The purpose of ventilation is to remove contaminants from homes, and this report discusses where, when, and how much ventilation is appropriate in a home, including examination of relevant codes and standards. Choosing the "best" system is not always straightforward; selecting a system involves balancing performance, efficiency, cost, required maintenance, and several other factors.

  2. The Validity of Subjective Performance Measures

    DEFF Research Database (Denmark)

    Meier, Kenneth J.; Winter, Søren C.; O'Toole, Laurence J.

    2015-01-01

    to provide, and are highly policy specific rendering generalization difficult. But are perceptual performance measures valid, and do they generate unbiased findings? We examine these questions in a comparative study of middle managers in schools in Texas and Denmark. The findings are remarkably similar...

  3. 78 FR 3319 - Amendments to Existing Validated End User Authorizations: Advanced Micro Devices China, Inc., Lam...

    Science.gov (United States)

    2013-01-16

    ...In this rule, the Bureau of Industry and Security (BIS) amends the Export Administration Regulations (EAR) to revise the existing Authorization Validated End-User (VEU) listings for four VEUs in the People's Republic of China (PRC). Specifically, BIS amends Supplement No. 7 to part 748 of the EAR to update VEU Advanced Micro Devices China Inc.'s (AMD China) current list of eligible destinations. BIS also amends the authorization of VEU Lam Research Corporation (Lam) by updating the addresses of ten eligible destinations and reformatting the list of Lam's existing eligible destinations into groups associated with specific eligible items. BIS also updates the EAR to amend the addresses and lists of eligible items for VEUs SK hynix Semiconductor (China) Ltd. and SK hynix Semiconductor (Wuxi) Ltd. Finally, BIS amends Supplement No. 7 to part 748 of the EAR to include language reminding exporters that the language in the Supplement does not supersede other requirements in the EAR. These amendments to the authorizations of the named VEUs are not the result of activities of concern. The respective changes were prompted by factors arising from the companies' normal course of business or are being done at the request of the companies.

  4. Discriminant validity of well-being measures.

    Science.gov (United States)

    Lucas, R E; Diener, E; Suh, E

    1996-09-01

    The convergent and discriminant validities of well-being concepts were examined using multitrait-multimethod matrix analyses (D. T. Campbell & D. W. Fiske, 1959) on 3 sets of data. In Study 1, participants completed measures of life satisfaction, positive affect, negative affect, self-esteem, and optimism on 2 occasions 4 weeks apart and also obtained 3 informant ratings. In Study 2, participants completed each of the 5 measures on 2 occasions 2 years apart and collected informant reports at Time 2. In Study 3, participants completed 2 different scales for each of the 5 constructs. Analyses showed that (a) life satisfaction is discriminable from positive and negative affect, (b) positive affect is discriminable from negative affect, (c) life satisfaction is discriminable from optimism and self-esteem, and (d) optimism is separable from trait measures of negative affect.

  5. Broadband IR Measurements for Modis Validation

    Science.gov (United States)

    Jessup, Andrew T.

    2003-01-01

    The primary objective of this research was the development and deployment of autonomous shipboard systems for infrared measurement of ocean surface skin temperature (SST). The focus was on demonstrating long-term, all-weather capability and supplying calibrated skin SST to the MODIS Ocean Science Team (MOCEAN). A secondary objective was to investigate and account for environmental factors that affect in situ measurements of SST for validation of satellite products. We developed and extensively deployed the Calibrated, InfraRed, In situ Measurement System, or CIRIMS, for at-sea validation of satellite-derived SST. The design goals included autonomous operation at sea for up to 6 months and an accuracy of +/- 0.1 C. We used commercially available infrared pyrometers and a precision blackbody housed in a temperature-controlled enclosure. The sensors are calibrated at regular interval using a cylindro-cone target immersed in a temperature-controlled water bath, which allows the calibration points to follow the ocean surface temperature. An upward-looking pyrometer measures sky radiance in order to correct for the non-unity emissivity of water, which can introduce an error of up to 0.5 C. One of the most challenging aspects of the design was protection against the marine environment. A wide range of design strategies to provide accurate, all-weather measurements were investigated. The CIRIMS uses an infrared transparent window to completely protect the sensor and calibration blackbody from the marine environment. In order to evaluate the performance of this approach, the design incorporates the ability to make measurements with and without the window in the optical path.

  6. Use of existing patient-reported outcome (PRO) instruments and their modification: the ISPOR Good Research Practices for Evaluating and Documenting Content Validity for the Use of Existing Instruments and Their Modification PRO Task Force Report.

    Science.gov (United States)

    Rothman, Margaret; Burke, Laurie; Erickson, Pennifer; Leidy, Nancy Kline; Patrick, Donald L; Petrie, Charles D

    2009-01-01

    Patient-reported outcome (PRO) instruments are used to evaluate the effect of medical products on how patients feel or function. This article presents the results of an ISPOR task force convened to address good clinical research practices for the use of existing or modified PRO instruments to support medical product labeling claims. The focus of the article is on content validity, with specific reference to existing or modified PRO instruments, because of the importance of content validity in selecting or modifying an existing PRO instrument and the lack of consensus in the research community regarding best practices for establishing and documenting this measurement property. Topics addressed in the article include: definition and general description of content validity; PRO concept identification as the important first step in establishing content validity; instrument identification and the initial review process; key issues in qualitative methodology; and potential threats to content validity, with three case examples used to illustrate types of threats and how they might be resolved. A table of steps used to identify and evaluate an existing PRO instrument is provided, and figures are used to illustrate the meaning of content validity in relationship to instrument development and evaluation. RESULTS & RECOMMENDATIONS: Four important threats to content validity are identified: unclear conceptual match between the PRO instrument and the intended claim, lack of direct patient input into PRO item content from the target population in which the claim is desired, no evidence that the most relevant and important item content is contained in the instrument, and lack of documentation to support modifications to the PRO instrument. In some cases, careful review of the threats to content validity in a specific application may be reduced through additional well documented qualitative studies that specifically address the issue of concern. Published evidence of the content

  7. Validation of measured friction by process tests

    DEFF Research Database (Denmark)

    Eriksen, Morten; Henningsen, Poul; Tan, Xincai

    The objective of sub-task 3.3 is to evaluate under actual process conditions the friction formulations determined by simulative testing. As regards task 3.3 the following tests have been used according to the original project plan: 1. standard ring test and 2. double cup extrusion test. The task...... has, however, been extended to include a number of new developed process tests: 3. forward rod extrusion test, 4. special ring test at low normal pressure, 5. spike test (especially developed for warm and hot forging). Validation of the measured friction values in cold forming from sub-task 3.1 has...... been made with forward rod extrusion, and very good agreement was obtained between the measured friction values in simulative testing and process testing....

  8. Measurement of reactivity coefficients for code validation

    International Nuclear Information System (INIS)

    Nuding, Matthias; Loetsch, Thomas

    2005-01-01

    In the year 2003 measurements in the cold reactor state have been performed at the NPP KKI 2 in order to validate the codes that are used for reactor core calculations and especially for the proof of the shutdown margin that is produced by calculations only. For full power states code verification is quite easy because the calculations can be compared with different measured values, e.g. with the activation values determined by the aeroball system. For cold reactor states, however the data base is smaller, especially for reactor cores that are quite 'inhomogeneous' and have rather high Pu-fiss-and 235 U-contents. At the same time the cold reactor state is important regarding the shutdown margin. For these reasons the measurements mentioned above have been performed in order to check the accuracy of the codes that are used by the operator and by our organization for many years. Basically, boron concentrations and control rod worths for different configurations have been measured. The results of the calculation show a very good agreement with the measured values. Therefore, it can be stated that the operator's as well as our code system is suitable for routine use, e.g. during licensing procedures (Authors)

  9. Competency measurements: testing convergent validity for two measures.

    Science.gov (United States)

    Cowin, Leanne S; Hengstberger-Sims, Cecily; Eagar, Sandy C; Gregory, Linda; Andrew, Sharon; Rolley, John

    2008-11-01

    This paper is a report of a study to investigate whether the Australian National Competency Standards for Registered Nurses demonstrate correlations with the Finnish Nurse Competency Scale. Competency assessment has become popular as a key regulatory requirement and performance indicator. The term competency, however, does not have a globally accepted definition and this has the potential to create controversy, ambiguity and confusion. Variations in meaning and definitions adopted in workplaces and educational settings will affect the interpretation of research findings and have implications for the nursing profession. A non-experimental cross-sectional survey design was used with a convenience sample of 116 new graduate nurses in 2005. The second version of the Australian National Competency Standards and the Nurse Competency Scale was used to elicit responses to self-assessed competency in the transitional year (first year as a Registered Nurse). Correlational analysis of self-assessed levels of competence revealed a relationship between the Australian National Competency Standards (ANCI) and the Nurse Competency Scale (NCS). The correlational relation between ANCI domains and NCS factors suggests that these scales are indeed used to measure related dimensions. A statistically significant relationship (r = 0.75) was found between the two competency measures. Although the finding of convergent validity is insufficient to establish construct validity for competency as used in both measures in this study, it is an important step towards this goal. Future studies on relationships between competencies must take into account the validity and reliability of the tools.

  10. A validation study for the gas migration modelling of the compacted bentonite using existing experiment data

    International Nuclear Information System (INIS)

    Tawara, Y.; Mori, K.; Tada, K.; Shimura, T.; Sato, S.; Yamamoto, S.; Hayashi, H.

    2010-01-01

    gas to enter the water-saturated bentonite without propagation of pressure-induced pathway. In this validation study, we have adopted here two computer codes GETFLOWS and Code B right which are based on different conceptual models, respectively. GETFLOWS is the conventional non-isothermal multi-phase fluid-flow code. However pressure-induced macroscopic pathway propagation of porous media is incorporated by changing porosity and permeability explicitly depending on the pore pressure distribution. Code B right is so called coupled THM code and can be applied to non-isothermal two-phase flow in deformable porous media. Automatic inversion code namely UCODE-2005, which was developed by U.S Geological Survey, was used with GETFLOWS. Good matching was attained reasonably between the simulated and observed flow rate in both GETFLOWS and Code-Bright. However when we neglected the pressure-induced pathway propagations, any combinations of flow parameters could not provide a reasonable match between simulated and observed results. This also means that the capillary threshold for gas entry into water-saturated bentonite exists, suggesting consideration of unconventional two phase flow. On the other hand, the identified residual water saturation eventually, which can reproduce observed behaviour well, became extremely high. When we consider long-term behaviour including the re-saturation period after closure of disposal system, it is not available directly as the parameter of the unsaturated bentonite. The identified residual water saturation is only applicable to the fully-water saturated environments. The future work will focus on the gas flow in unsaturated bentonite using experimental data from not only laboratory but also in-situ data. In addition, we are planning to develop the modelling technique of long-term water and gas migration behaviour in the EBS which includes both re-saturation and gas migration phase considering the contribution of THMC coupled phenomena

  11. Space Suit Joint Torque Measurement Method Validation

    Science.gov (United States)

    Valish, Dana; Eversley, Karina

    2012-01-01

    In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

  12. Image fusion tool: Validation by phantom measurements

    International Nuclear Information System (INIS)

    Zander, A.; Geworski, L.; Richter, M.; Ivancevic, V.; Munz, D.L.; Muehler, M.; Ditt, H.

    2002-01-01

    Aim: Validation of a new image fusion tool with regard to handling, application in a clinical environment and fusion precision under different acquisition and registration settings. Methods: The image fusion tool investigated allows fusion of imaging modalities such as PET, CT, MRI. In order to investigate fusion precision, PET and MRI measurements were performed using a cylinder and a body contour-shaped phantom. The cylinder phantom (diameter and length 20 cm each) contained spheres (10 to 40 mm in diameter) which represented 'cold' or 'hot' lesions in PET measurements. The body contour-shaped phantom was equipped with a heart model containing two 'cold' lesions. Measurements were done with and without four external markers placed on the phantoms. The markers were made of plexiglass (2 cm diameter and 1 cm thickness) and contained a Ga-Ge-68 core for PET and Vitamin E for MRI measurements. Comparison of fusion results with and without markers was done visually and by computer assistance. This algorithm was applied to the different fusion parameters and phantoms. Results: Image fusion of PET and MRI data without external markers yielded a measured error of 0 resulting in a shift at the matrix border of 1.5 mm. Conclusion: The image fusion tool investigated allows a precise fusion of PET and MRI data with a translation error acceptable for clinical use. The error is further minimized by using external markers, especially in the case of missing anatomical orientation. Using PET the registration error depends almost only on the low resolution of the data

  13. Measuring and Advancing Experimental Design Ability in an Introductory Course without Altering Existing Lab Curriculum

    Directory of Open Access Journals (Sweden)

    Ryan A. Shanks

    2017-05-01

    Full Text Available Introductory biology courses provide an important opportunity to prepare students for future courses, yet existing cookbook labs, although important in their own way, fail to provide many of the advantages of semester-long research experiences. Engaging, authentic research experiences aid biology students in meeting many learning goals. Therefore, overlaying a research experience onto the existing lab structure allows faculty to overcome barriers involving curricular change. Here we propose a working model for this overlay design in an introductory biology course and detail a means to conduct this lab with minimal increases in student and faculty workloads. Furthermore, we conducted exploratory factor analysis of the Experimental Design Ability Test (EDAT and uncovered two latent factors which provide valid means to assess this overlay model’s ability to increase advanced experimental design abilities. In a pre-test/post-test design, we demonstrate significant increases in both basic and advanced experimental design abilities in an experimental and comparison group. We measured significantly higher gains in advanced experimental design understanding in students in the experimental group. We believe this overlay model and EDAT factor analysis contribute a novel means to conduct and assess the effectiveness of authentic research experiences in an introductory course without major changes to the course curriculum and with minimal increases in faculty and student workloads.

  14. 76 FR 69609 - Amendment to Existing Validated End-User Authorizations in the People's Republic of China...

    Science.gov (United States)

    2011-11-09

    ... Destinations'' in the People's Republic of China (PRC). BIS also removes one facility from the list of...-01] RIN 0694-AF32 Amendment to Existing Validated End-User Authorizations in the People's Republic of... the ``Eligible Destinations'' column in ``China (People's Republic of)''. Dated: November 1, 2011...

  15. Use of Synchronized Phasor Measurements for Model Validation in ERCOT

    Science.gov (United States)

    Nuthalapati, Sarma; Chen, Jian; Shrestha, Prakash; Huang, Shun-Hsien; Adams, John; Obadina, Diran; Mortensen, Tim; Blevins, Bill

    2013-05-01

    This paper discusses experiences in the use of synchronized phasor measurement technology in Electric Reliability Council of Texas (ERCOT) interconnection, USA. Implementation of synchronized phasor measurement technology in the region is a collaborative effort involving ERCOT, ONCOR, AEP, SHARYLAND, EPG, CCET, and UT-Arlington. As several phasor measurement units (PMU) have been installed in ERCOT grid in recent years, phasor data with the resolution of 30 samples per second is being used to monitor power system status and record system events. Post-event analyses using recorded phasor data have successfully verified ERCOT dynamic stability simulation studies. Real time monitoring software "RTDMS"® enables ERCOT to analyze small signal stability conditions by monitoring the phase angles and oscillations. The recorded phasor data enables ERCOT to validate the existing dynamic models of conventional and/or wind generator.

  16. Validating Measures of Mathematical Knowledge for Teaching

    Science.gov (United States)

    Kane, Michael

    2007-01-01

    According to Schilling, Blunk, and Hill, the set of papers presented in this journal issue had two main purposes: (1) to use an argument-based approach to evaluate the validity of the tests of mathematical knowledge for teaching (MKT), and (2) to critically assess the author's version of an argument-based approach to validation (Kane, 2001, 2004).…

  17. Abstract on the Effective validation of both new and existing methods for the observation and forecasting of volcanic emissions

    Science.gov (United States)

    Sathnur, Ashwini

    2017-04-01

    Validation of the Existing products of the Remote Sensing instruments Review Comment Number 1 Ground - based instruments and space - based instruments are available for remote sensing of the Volcanic eruptions. Review Comment Number 2 The sunlight spectrum appears over the volcanic geographic area. This sunlight is reflected with the image of the volcano geographic area, to the satellite. The satellite captures this emitted spectrum of the image and further calculates the occurrences of the volcanic eruption. Review Comment Number 3 This computation system derives the presence and detection of sulphur dioxide and Volcanic Ash in the emitted spectrum. The temperature of the volcanic region is also measured. If these inputs derive the possibility of occurrence of an eruption, then the data is manually captured by the system for further usage and hazard mitigation. Review Comment Number 4 The instrument is particularly important in capturing the volcanogenic signal. This capturing operation should be carried out during the appropriate time of the day. This is carried out ideally at the time of the day when the reflected image spectra is best available. Capturing the data is not advisable to be performed at the night time, as the sunlight spectra is at its minimum. This would lead to erroneous data interpretation, as there is no sunlight for reflection of the volcanic region. Thus leading to the least capture of the emitted light spectra. Review Comment Number 5 An ideal area coverage of the spectrometer is mandatory. This is basically for the purpose of capturing the right area of data, in order to precisely derive the occurrence of a volcanic eruption. The larger the spatial resolution, there would be a higher capture of the geographic region, and this would lead to a lesser precise data capture. This would lead to missing details in the data capture. Review Comment Number 6 Ideal qualities for the remote sensing instrument are mentioned below:- Minimum "false

  18. The Predictive Validity of Projective Measures.

    Science.gov (United States)

    Suinn, Richard M.; Oskamp, Stuart

    Written for use by clinical practitioners as well as psychological researchers, this book surveys recent literature (1950-1965) on projective test validity by reviewing and critically evaluating studies which shed light on what may reliably be predicted from projective test results. Two major instruments are covered: the Rorschach and the Thematic…

  19. Validation of existing diagnosis of autism in mainland China using standardised diagnostic instruments

    Science.gov (United States)

    Sun, Xiang; Allison, Carrie; Auyeung, Bonnie; Zhang, Zhixiang; Matthews, Fiona E; Baron-Cohen, Simon; Brayne, Carol

    2016-01-01

    Research to date in mainland China has mainly focused on children with autistic disorder rather than Autism Spectrum Conditions and the diagnosis largely depended on clinical judgment without the use of diagnostic instruments. Whether children who have been diagnosed in China before meet the diagnostic criteria of Autism Spectrum Conditions is not known nor how many such children would meet these criteria. The aim of this study was to evaluate children with a known diagnosis of autism in mainland China using the Autism Diagnostic Observation Schedule and the Autism Diagnostic Interview–Revised to verify that children who were given a diagnosis of autism made by Chinese clinicians in China were mostly children with severe autism. Of 50 children with an existing diagnosis of autism made by Chinese clinicians, 47 children met the diagnosis of autism on the Autism Diagnostic Observation Schedule algorithm and 44 children met the diagnosis of autism on the Autism Diagnostic Interview–Revised algorithm. Using the Gwet’s alternative chance-corrected statistic, the agreement between the Chinese diagnosis and the Autism Diagnostic Observation Schedule diagnosis was very good (AC1 = 0.94, p diagnosis and the Autism Diagnostic Interview–Revised (AC1 = 0.91, p Autism Diagnostic Observation Schedule and the Autism Diagnostic Interview–Revised was lower but still very good (AC1 = 0.83, p < 0.005). PMID:25757721

  20. Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review

    DEFF Research Database (Denmark)

    Larsen, Camilla Marie; Juul-Kristensen, Birgit; Lund, Hans

    2014-01-01

    %) to "poor" (43%), with only one study rated as "good". The reliability domain was most often investigated. Few of the assessment methods in the included studies that had "fair" or "good" measurement property ratings demonstrated acceptable results for both reliability and validity. We found a substantially...... larger number of clinical scapular assessment methods than previously reported. Using the COSMIN checklist the methodological quality of the included measurement properties in the reliability and validity domains were in general "fair" to "poor". None were examined for all three domains: (1) reliability...... excluded for evaluation due to no/few clinimetric results, leaving 35 studies for evaluation. Graded according to the COnsensus-based Standards for the selection of health Measurement INstruments (COSMIN checklist), the methodological quality in the reliability and validity domains was "fair" (57...

  1. TWO CRITERIA FOR GOOD MEASUREMENTS IN RESEARCH: VALIDITY AND RELIABILITY

    Directory of Open Access Journals (Sweden)

    Haradhan Kumar Mohajan

    2017-12-01

    Full Text Available Reliability and validity are two most important and fundamental features in the evaluation of any measurement instrument or toll for a good research. The purpose of this research is to discuss the validity and reliability of measurement instruments that are used in research. Validity concerns what an instrument measures, and how well it does so. Reliability concerns the faith that one can have in the data obtained from use of an instrument, that is, the degree to which any measuring tool controls for random error. An attempt has been taken here to review the reliability and validity, and threat to them in some details.

  2. Validation of Sodar Measurements for Wind Power

    OpenAIRE

    Hansen, Kurt Schaldemose

    2006-01-01

    A ground-based SODAR has been tested for 1½ years together with a traditional measurement set-up consisting of cups and vanes for measuring wind data for wind power assessment at a remote location. Many problems associated to the operation of a remote located SODAR have been solved during the project and a new remote power system has been designed. A direct comparison between SODAR and cup measurements revealed a limitation for the SODAR measurements during different weather conditions, espec...

  3. Measuring Globalization: Existing Methods and Their Implications for Teaching Global Studies and Forecasting

    Science.gov (United States)

    Zinkina, Julia; Korotayev, Andrey; Andreev, Aleksey I.

    2013-01-01

    Purpose: The purpose of this paper is to encourage discussions regarding the existing approaches to globalization measurement (taking mainly the form of indices and rankings) and their shortcomings in terms of applicability to developing Global Studies curricula. Another aim is to propose an outline for the globalization measurement methodology…

  4. Validation of Sodar Measurements for Wind Power

    DEFF Research Database (Denmark)

    Hansen, Kurt Schaldemose

    2006-01-01

    the project and a new remote power system has been designed. A direct comparison between SODAR and cup measurements revealed a limitation for the SODAR measurements during different weather conditions, especially since the SODAR was not able to measure wind speeds above 15 m/s due to an increasing back-ground......A ground-based SODAR has been tested for 1½ years together with a traditional measurement set-up consisting of cups and vanes for measuring wind data for wind power assessment at a remote location. Many problems associated to the operation of a remote located SODAR have been solved during...... noise. Instead, using the SODAR as a profiler to establish representative wind speed profiles was successful. These wind speed profiles are combined with low height reference measurements to establish reliable hub height wind speed distributions. Representative wind speed profiles can be establish...

  5. Measuring the Success of Changes to Existing Business Intelligence Solutions to Improve Business Intelligence Reporting

    OpenAIRE

    Dedić, Nedim; Stanier, Clare

    2016-01-01

    Evaluating the success of changes to an existing Business Intelligence (BI) environment means that there is a need to compare the level of user satisfaction with the original and amended versions of the application. The focus of this paper is on producing an evaluation tool, which can be used to measure the success of changes to existing BI solutions to support improved BI reporting. The paper identifies the users involved in the BI process and investigates what is meant by satisfaction in th...

  6. The Development, Validity, and Reliability of a Psychometric Instrument Measuring Competencies in Student Affairs

    Science.gov (United States)

    Sriram, Rishi

    2014-01-01

    The study of competencies in student affairs began more than 4 decades ago, but no instrument currently exists to measure competencies broadly. This study builds upon previous research by developing an instrument to measure student affairs competencies. Results not only validate the competencies espoused by NASPA and ACPA, but also suggest adding…

  7. Validation of SAGE II ozone measurements

    Science.gov (United States)

    Cunnold, D. M.; Chu, W. P.; Mccormick, M. P.; Veiga, R. E.; Barnes, R. A.

    1989-01-01

    Five ozone profiles from the Stratospheric Aerosol and Gas Experiment (SAGE) II are compared with coincident ozonesonde measurements obtained at Natal, Brazil, and Wallops Island, Virginia. It is shown that the mean difference between all of the measurements is about 1 percent and that the agreement is within 7 percent at altitudes between 20 and 53 km. Good agreement is also found for ozone mixing ratios on pressure surfaces. It is concluded that the SAGE II profiles provide useful ozone information up to about 60 km altitude.

  8. Simplified Summative Temporal Bone Dissection Scale Demonstrates Equivalence to Existing Measures.

    Science.gov (United States)

    Pisa, Justyn; Gousseau, Michael; Mowat, Stephanie; Westerberg, Brian; Unger, Bert; Hochman, Jordan B

    2018-01-01

    Emphasis on patient safety has created the need for quality assessment of fundamental surgical skills. Existing temporal bone rating scales are laborious, subject to evaluator fatigue, and contain inconsistencies when conferring points. To address these deficiencies, a novel binary assessment tool was designed and validated against a well-established rating scale. Residents completed a mastoidectomy with posterior tympanotomy on identical 3D-printed temporal bone models. Four neurotologists evaluated each specimen using a validated scale (Welling) and a newly developed "CanadaWest" scale, with scoring repeated after a 4-week interval. Nineteen participants were clustered into junior, intermediate, and senior cohorts. An ANOVA found significant differences between performance of the junior-intermediate and junior-senior cohorts for both Welling and CanadaWest scales ( P .05). Cohen's kappa found strong intrarater reliability (0.711) with a high degree of interrater reliability of (0.858) for the CanadaWest scale, similar to scores on the Welling scale of (0.713) and (0.917), respectively. The CanadaWest scale was facile and delineated performance by experience level with strong intrarater reliability. Comparable to the validated Welling Scale, it distinguished junior from senior trainees but was challenged in differentiating intermediate and senior trainee performance.

  9. Measure Guideline: Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

    Energy Technology Data Exchange (ETDEWEB)

    Natarajan, H.; Klocke, S.; Puttagunta, S.

    2012-06-01

    This measure guideline provides information on an effective method to insulate the interior of existing brick masonry walls with extruded polystyrene (XPS) insulation board. The guide outlines step-by-step design and installation procedures while explaining the benefits and tradeoffs where applicable. The authors intend that this document be useful to a varied audience that includes builders, remodelers, contractors and homeowners.

  10. Measure Guideline. Installing Rigid Foam Insulation on the Interior of Existing Brick Walls

    Energy Technology Data Exchange (ETDEWEB)

    Natarajan, Hariharan [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Klocke, Steve [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Puttagunta, Srikanth [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2012-06-01

    This measure guideline provides information on an effective method to insulate the interior of existing brick masonry walls with extruded polystyrene (XPS) insulation board. The guide outlines step-by-step design and installation procedures while explaining the benefits and tradeoffs where applicable. The authors intend that this document be useful to a varied audience that includes builders,remodelers, contractors and homeowners.

  11. Do Zero Correlations Really Exist among Measures of Different Intellectual Abilities.

    Science.gov (United States)

    Alliger, George M.

    1988-01-01

    Whether measures of different intellectual abilities are positively intercorrelated was studied. A data set of over 7,000 correlations analyzed by J. P. Guilford (1964) does not support the existence of zero correlations among tests of intellectual abilities. Guilford's data-based results are flawed by oversights of problems in the data. (TJH)

  12. Optimization and validation of an existing, surgical and robust dry eye rat model for the evaluation of therapeutic compounds.

    Science.gov (United States)

    Joossen, Cedric; Lanckacker, Ellen; Zakaria, Nadia; Koppen, Carina; Joossens, Jurgen; Cools, Nathalie; De Meester, Ingrid; Lambeir, Anne-Marie; Delputte, Peter; Maes, Louis; Cos, Paul

    2016-05-01

    The aim of this research was to optimize and validate an animal model for dry eye, adopting clinically relevant evaluation parameters. Dry eye was induced in female Wistar rats by surgical removal of the exorbital lacrimal gland. The clinical manifestations of dry eye were evaluated by tear volume measurements, corneal fluorescein staining, cytokine measurements in tear fluid, MMP-9 mRNA expression and CD3(+) cell infiltration in the conjunctiva. The animal model was validated by treatment with Restasis(®) (4 weeks) and commercial dexamethasone eye drops (2 weeks). Removal of the exorbital lacrimal gland resulted in 50% decrease in tear volume and a gradual increase in corneal fluorescein staining. Elevated levels of TNF-α and IL-1α have been registered in tear fluid together with an increase in CD3(+) cells in the palpebral conjunctiva when compared to control animals. Additionally, an increase in MMP-9 mRNA expression was recorded in conjunctival tissue. Reference treatment with Restasis(®) and dexamethasone eye drops had a positive effect on all evaluation parameters, except on tear volume. This rat dry eye model was validated extensively and judged appropriate for the evaluation of novel compounds and therapeutic preparations for dry eye disease. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. The Validity of Attribute-Importance Measurement: A Review

    NARCIS (Netherlands)

    Ittersum, van K.; Pennings, J.M.E.; Wansink, B.; Trijp, van J.C.M.

    2007-01-01

    A critical review of the literature demonstrates a lack of validity among the ten most common methods for measuring the importance of attributes in behavioral sciences. The authors argue that one of the key determinants of this lack of validity is the multi-dimensionality of attribute importance.

  14. Anxiety measures validated in perinatal populations: a systematic review.

    Science.gov (United States)

    Meades, Rose; Ayers, Susan

    2011-09-01

    Research and screening of anxiety in the perinatal period is hampered by a lack of psychometric data on self-report anxiety measures used in perinatal populations. This paper aimed to review self-report measures that have been validated with perinatal women. A systematic search was carried out of four electronic databases. Additional papers were obtained through searching identified articles. Thirty studies were identified that reported validation of an anxiety measure with perinatal women. Most commonly validated self-report measures were the General Health Questionnaire (GHQ), State-Trait Anxiety Inventory (STAI), and Hospital Anxiety and Depression Scales (HADS). Of the 30 studies included, 11 used a clinical interview to provide criterion validity. Remaining studies reported one or more other forms of validity (factorial, discriminant, concurrent and predictive) or reliability. The STAI shows criterion, discriminant and predictive validity and may be most useful for research purposes as a specific measure of anxiety. The Kessler 10 (K-10) may be the best short screening measure due to its ability to differentiate anxiety disorders. The Depression Anxiety Stress Scales 21 (DASS-21) measures multiple types of distress, shows appropriate content, and remains to be validated against clinical interview in perinatal populations. Nineteen studies did not report sensitivity or specificity data. The early stages of research into perinatal anxiety, the multitude of measures in use, and methodological differences restrict comparison of measures across studies. There is a need for further validation of self-report measures of anxiety in the perinatal period to enable accurate screening and detection of anxiety symptoms and disorders. Copyright © 2010 Elsevier B.V. All rights reserved.

  15. Validation of the actuator line/Navier Stokes technique using mexico measurements

    DEFF Research Database (Denmark)

    Shen, Wen Zhong; Zhu, Wei Jun; Sørensen, Jens Nørkær

    2010-01-01

    This paper concerns the contribution of DTU MEK in the international research collaboration project (MexNext) within the framework of IEA Annex 29 to validate aerodynamic models or CFD codes using the existing measurements made in the previous EU funded projectMEXICO (Model Experiments in Control......This paper concerns the contribution of DTU MEK in the international research collaboration project (MexNext) within the framework of IEA Annex 29 to validate aerodynamic models or CFD codes using the existing measurements made in the previous EU funded projectMEXICO (Model Experiments...... in Controlled Conditions). The Actuator Line/Navier Stokes (AL/NS) technique developed at DTU is validated against the detailed MEXICO measurements. The AL/NS computations without the DNW wind tunnel with speeds of 10m/s, 15m/s and 24m/s. Comparisons of blade loading between computations and measurements show...

  16. Reliability and validity of non-radiographic methods of thoracic kyphosis measurement: a systematic review.

    Science.gov (United States)

    Barrett, Eva; McCreesh, Karen; Lewis, Jeremy

    2014-02-01

    A wide array of instruments are available for non-invasive thoracic kyphosis measurement. Guidelines for selecting outcome measures for use in clinical and research practice recommend that properties such as validity and reliability are considered. This systematic review reports on the reliability and validity of non-invasive methods for measuring thoracic kyphosis. A systematic search of 11 electronic databases located studies assessing reliability and/or validity of non-invasive thoracic kyphosis measurement techniques. Two independent reviewers used a critical appraisal tool to assess the quality of retrieved studies. Data was extracted by the primary reviewer. The results were synthesized qualitatively using a level of evidence approach. 27 studies satisfied the eligibility criteria and were included in the review. The reliability, validity and both reliability and validity were investigated by sixteen, two and nine studies respectively. 17/27 studies were deemed to be of high quality. In total, 15 methods of thoracic kyphosis were evaluated in retrieved studies. All investigated methods showed high (ICC ≥ .7) to very high (ICC ≥ .9) levels of reliability. The validity of the methods ranged from low to very high. The strongest levels of evidence for reliability exists in support of the Debrunner kyphometer, Spinal Mouse and Flexicurve index, and for validity supports the arcometer and Flexicurve index. Further reliability and validity studies are required to strengthen the level of evidence for the remaining methods of measurement. This should be addressed by future research. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Construction and Initial Validation of the Multiracial Experiences Measure (MEM)

    Science.gov (United States)

    Yoo, Hyung Chol; Jackson, Kelly; Guevarra, Rudy P.; Miller, Matthew J.; Harrington, Blair

    2015-01-01

    This article describes the development and validation of the Multiracial Experiences Measure (MEM): a new measure that assesses uniquely racialized risks and resiliencies experienced by individuals of mixed racial heritage. Across two studies, there was evidence for the validation of the 25-item MEM with 5 subscales including Shifting Expressions, Perceived Racial Ambiguity, Creating Third Space, Multicultural Engagement, and Multiracial Discrimination. The 5-subscale structure of the MEM was supported by a combination of exploratory and confirmatory factor analyses. Evidence of criterion-related validity was partially supported with MEM subscales correlating with measures of racial diversity in one’s social network, color-blind racial attitude, psychological distress, and identity conflict. Evidence of discriminant validity was supported with MEM subscales not correlating with impression management. Implications for future research and suggestions for utilization of the MEM in clinical practice with multiracial adults are discussed. PMID:26460977

  18. Content Validity of a Tool Measuring Medication Errors.

    Science.gov (United States)

    Tabassum, Nishat; Allana, Saleema; Saeed, Tanveer; Dias, Jacqueline Maria

    2015-08-01

    The objective of this study was to determine content and face validity of a tool measuring medication errors among nursing students in baccalaureate nursing education. Data was collected from the Aga Khan University School of Nursing and Midwifery (AKUSoNaM), Karachi, from March to August 2014. The tool was developed utilizing literature and the expertise of the team members, expert in different areas. The developed tool was then sent to five experts from all over Karachi for ensuring the content validity of the tool, which was measured on relevance and clarity of the questions. The Scale Content Validity Index (S-CVI) for clarity and relevance of the questions was found to be 0.94 and 0.98, respectively. The tool measuring medication errors has an excellent content validity. This tool should be used for future studies on medication errors, with different study populations such as medical students, doctors, and nurses.

  19. SMART literature review report on existing practice in measuring success factors in second chance education

    DEFF Research Database (Denmark)

    Jensen, Ulla Højmark

    2015-01-01

    criteria, indicators and benchmarks that measures developments of learners, impacts of informal and non-formal learning methods and evidences success factors of second chance education. The aim of the project is to build an evidence base of outcomes and impacts of second chance education and to enhance......, and the Commission cannot be held responsible for any use which may be made of the information contained therein. This literature review aims at developing an insight of the existing practice of measuring and evidencing success factors in second chance education. In the following, we will highlight examples of good...

  20. Measurement properties of existing clinical assessment methods evaluating scapular positioning and function. A systematic review

    DEFF Research Database (Denmark)

    Larsen, Camilla Marie; Juul-Kristensen, Birgit; Lund, Hans

    2014-01-01

    a substantially larger number of clinical scapular assessment methods than previously reported. Using the COSMIN checklist the methodological quality of the included measurement properties in the reliability and validity domains were in general ‘‘fair’’ to ‘‘poor’’. None were examined for all three domains: (1...... utility for clinical practice.......The aims were to compile a schematic overview of clinical scapular assessment methods and critically appraise the methodological quality of the involved studies. A systematic, computerassisted literature search using Medline, CINAHL, SportDiscus and EMBASE was performed from inception to October...

  1. Validation of an Instrument to Measure Students' Motivation and Self-Regulation towards Technology Learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-01-01

    Background: Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose: The present study is to validate an…

  2. Stress Prediction for Distributed Structural Health Monitoring Using Existing Measurements and Pattern Recognition.

    Science.gov (United States)

    Lu, Wei; Teng, Jun; Zhou, Qiushi; Peng, Qiexin

    2018-02-01

    The stress in structural steel members is the most useful and directly measurable physical quantity to evaluate the structural safety in structural health monitoring, which is also an important index to evaluate the stress distribution and force condition of structures during structural construction and service phases. Thus, it is common to set stress as a measure in steel structural monitoring. Considering the economy and the importance of the structural members, there are only a limited number of sensors that can be placed, which means that it is impossible to obtain the stresses of all members directly using sensors. This study aims to develop a stress response prediction method for locations where there are insufficent sensors, using measurements from a limited number of sensors and pattern recognition. The detailed improved aspects are: (1) a distributed computing process is proposed, where the same pattern is recognized by several subsets of measurements; and (2) the pattern recognition using the subset of measurements is carried out by considering the optimal number of sensors and number of fusion patterns. The validity and feasibility of the proposed method are verified using two examples: the finite-element simulation of a single-layer shell-like steel structure, and the structural health monitoring of the space steel roof of Shenzhen Bay Stadium; for the latter, the anti-noise performance of this method is verified by the stress measurements from a real-world project.

  3. The BETA ® nursing measure: Calibrating construct validity with ...

    African Journals Online (AJOL)

    Background: The BETA nursing measure has been introduced as a tool to routinely measure and monitor the outcomes of patients' activities of daily living in a restorative nursing care context. Objectives: To investigate the BETA's construct validity using the Rasch model with specific reference to the BETA's potential to be ...

  4. Extending Validity Evidence for Multidimensional Measures of Coaching Competency

    Science.gov (United States)

    Myers, Nicholas D.; Wolfe, Edward W.; Maier, Kimberly S.; Feltz, Deborah L.; Reckase, Mark D.

    2006-01-01

    This study extended validity evidence for multidimensional measures of coaching competency derived from the Coaching Competency Scale (CCS; Myers, Feltz, Maier, Wolfe, & Reckase, 2006) by examining use of the original rating scale structure and testing how measures related to satisfaction with the head coach within teams and between teams.…

  5. Trade policy responses to food price crisis and implications for existing domestic support measures

    DEFF Research Database (Denmark)

    Yu, Wusheng; Jensen, Hans Grinsted

    2014-01-01

    jointly moderated rises of domestic grain prices. In particular, domestic and trade measures on key agricultural inputs such as fertilizers are shown to contribute significantly to expand grain outputs and reduce domestic market prices. While the short-term goal in stabilizing domestic grain prices......Many national governments around the world applied export restrictions in order to achieve domestic market stabilization during the 2007/8 world food price crisis. However, current literature says little about how these export restrictions interact with existing domestic support measures in jointly...... determining domestic market outcomes. This paper analyzes this interaction by providing a quantitative assessment on how increased spending on agricultural domestic support in China offset the negative effects on grain production caused by the country's export restrictions and how these two types of measures...

  6. Measuring and Managing Value Co-Creation Process: Overview of Existing Theoretical Models

    Directory of Open Access Journals (Sweden)

    Monika Skaržauskaitė

    2013-08-01

    Full Text Available Purpose — the article is to provide a holistic view on concept of value co-creation and existing models for measuring and managing it by conducting theoretical analysis of scientific literature sources targeting the integration of various approaches. Most important and relevant results of the literature study are presented with a focus on changed roles of organizations and consumers. This article aims at contributing theoretically to the research stream of measuring co-creation of value in order to gain knowledge for improvement of organizational performance and enabling new and innovative means of value creation. Design/methodology/approach. The nature of this research is exploratory – theoretical analysis and synthesis of scientific literature sources targeting the integration of various approaches was performed. This approach was chosen due to the absence of established theory on models of co-creation, possible uses in organizations and systematic overview of tools measuring/suggesting how to measure co-creation. Findings. While the principles of managing and measuring co-creation in regards of consumer motivation and involvement are widely researched, little attempt has been made to identify critical factors and create models dealing with organizational capabilities and managerial implications of value co-creation. Systematic analysis of literature revealed a gap not only in empirical research concerning organization’s role in co-creation process, but in theoretical and conceptual levels, too. Research limitations/implications. The limitations of this work as a literature review lies in its nature – the complete reliance on previously published research papers and the availability of these studies. For a deeper understanding of co-creation management and for developing models that can be used in real-life organizations, a broader theoretical, as well as empirical, research is necessary. Practical implications. Analysis of the

  7. A Systematic Review on Existing Measures for the Subjective Assessment of Rehabilitation and Assistive Robot Devices

    Directory of Open Access Journals (Sweden)

    Yiannis Koumpouros

    2016-01-01

    Full Text Available The objective of the current study is to identify and classify outcome measures currently used for the assessment of rehabilitation or assistive robot devices. We conducted a systematic review of the literature using PubMed, MEDLINE, CIRRIE, and Scopus databases for studies that assessed rehabilitation or assistive robot devices from 1980 through January 2016. In all, 31 articles met all inclusion criteria. Tailor-made questionnaires were the most commonly used tool at 66.7%, while the great majority (93.9% of the studies used nonvalidated instruments. The study reveals the absence of a standard scale which makes it difficult to compare the results from different researchers. There is a great need, therefore, for a valid and reliable instrument to be available for use by the intended end users for the subjective assessment of robot devices. The study concludes by identifying two scales that have been validated in general assistive technology devices and could support the scope of subjective assessment in rehabilitation or assistive robots (however, with limited coverage and a new one called PYTHEIA, recently published. The latter intends to close the gap and help researchers and developers to evaluate, assess, and produce products that satisfy the real needs of the end users.

  8. Validation of Navigation Ultrasound for Clavicular Length Measurement

    DEFF Research Database (Denmark)

    Høj, Anders Thorsmark; Villa, Chiara; Christensen, Ole M.

    2017-01-01

    interval): approximately ± 7.5 mm, Pearson's correlation R: 0.948-0.974). Navigation ultrasound can measure clavicular length with an intra-rater reliability matching that of 3-D rendered computed tomography scans and with high validity. Its use could spread to other fields requiring accurate...... of 52.5 (range: 21-78 y) were included. Navigation ultrasound exhibited high reliability (intra-class correlation coefficient: 0.942-0.997, standard error of the mean: 0.7-2.9 mm, minimal detectable change: 2.3-8.1 mm) and validity (measurement error: 1.3%-1.8%, limits of agreement (95% confidence...

  9. Level validity of self-report whole-family measures.

    Science.gov (United States)

    Manders, Willeke A; Cook, William L; Oud, Johan H L; Scholte, Ron H J; Janssens, Jan M A M; De Bruyn, Eric E J

    2007-12-01

    This article introduces an approach to testing the level validity of family assessment instruments (i.e., whether a family instrument measures family functioning at the level of the system it purports to assess). Two parents and 2 adolescents in 69 families rated the warmth in each of their family relationships and in the family as a whole. Family members' ratings of whole-family warmth assessed family functioning not only at the family level (i.e., characteristics of the family as a whole) but also at the individual level of analysis (i.e., characteristics of family members as raters), indicating a lack of level validity. Evidence was provided for the level validity of a latent variable based on family members' ratings of whole-family warmth. The findings underscore the importance of assessing the level validity of individual ratings of whole-family functioning.

  10. Design, construction, and validation of a scale to measure cyberbullying in a work environment

    Directory of Open Access Journals (Sweden)

    Luz N. Fernández-López

    2018-04-01

    Full Text Available The objective of this study was to design, construct, and validate a scale to measure cyberbullying in a work environment. The design used was quantitative, not experimental, and transversal. The research method was based on the Reactive Response Theory. This research produced a validated scale with a sample of the work environment in Puerto Rico. Three analyses were performed: content validity, reliability analysis of the Cronbach alpha coefficient, and the divergent type construct validity. Based on the analysis of the results, the scale was deemed to be useful for the purpose it was designed. Building a scale that measures cyberbullying contributes to the design of new instruments and the revision of existing ones; furthermore, it may serve as the basis for future re- search related to the topic of cyberbullying.

  11. Validation of a Measure of Family Resilience among Iraq and Afghanistan Veterans.

    Science.gov (United States)

    Finley, Erin P; Pugh, Mary Jo; Palmer, Raymond F

    2016-01-01

    Although interactions within veterans' families may support or inhibit resilient coping to stress and trauma across the deployment cycle, research on family resilience has been hampered by the lack of a brief assessment. Using a three-stage mixed-method study, we developed and conducted preliminary validation of a measure of family resilience tailored for Iraq and Afghanistan veterans (IAV), the Family Resilience Scale for Veterans (FRS-V) , which was field-tested using a survey of 151 IAV. Our findings indicate the resulting 6-item measure shows strong initial reliability and validity and support the application of existing models of family resilience in this population.

  12. Measuring Nutrition Literacy in Spanish-Speaking Latinos: An Exploratory Validation Study.

    Science.gov (United States)

    Gibbs, Heather D; Camargo, Juliana M T B; Owens, Sarah; Gajewski, Byron; Cupertino, Ana Paula

    2017-11-21

    Nutrition is important for preventing and treating chronic diseases highly prevalent among Latinos, yet no tool exists for measuring nutrition literacy among Spanish speakers. This study aimed to adapt the validated Nutrition Literacy Assessment Instrument for Spanish-speaking Latinos. This study was developed in two phases: adaptation and validity testing. Adaptation included translation, expert item content review, and interviews with Spanish speakers. For validity testing, 51 participants completed the Short Assessment of Health Literacy-Spanish (SAHL-S), the Nutrition Literacy Assessment Instrument in Spanish (NLit-S), and socio-demographic questionnaire. Validity and reliability statistics were analyzed. Content validity was confirmed with a Scale Content Validity Index of 0.96. Validity testing demonstrated NLit-S scores were strongly correlated with SAHL-S scores (r = 0.52, p internal consistency was excellent (Cronbach's α = 0.92). The NLit-S demonstrates validity and reliability for measuring nutrition literacy among Spanish-speakers.

  13. Controlling for Frailty in Pharmacoepidemiologic Studies of Older Adults: Validation of an Existing Medicare Claims-based Algorithm.

    Science.gov (United States)

    Cuthbertson, Carmen C; Kucharska-Newton, Anna; Faurot, Keturah R; Stürmer, Til; Jonsson Funk, Michele; Palta, Priya; Windham, B Gwen; Thai, Sydney; Lund, Jennifer L

    2018-07-01

    Frailty is a geriatric syndrome characterized by weakness and weight loss and is associated with adverse health outcomes. It is often an unmeasured confounder in pharmacoepidemiologic and comparative effectiveness studies using administrative claims data. Among the Atherosclerosis Risk in Communities (ARIC) Study Visit 5 participants (2011-2013; n = 3,146), we conducted a validation study to compare a Medicare claims-based algorithm of dependency in activities of daily living (or dependency) developed as a proxy for frailty with a reference standard measure of phenotypic frailty. We applied the algorithm to the ARIC participants' claims data to generate a predicted probability of dependency. Using the claims-based algorithm, we estimated the C-statistic for predicting phenotypic frailty. We further categorized participants by their predicted probability of dependency (<5%, 5% to <20%, and ≥20%) and estimated associations with difficulties in physical abilities, falls, and mortality. The claims-based algorithm showed good discrimination of phenotypic frailty (C-statistic = 0.71; 95% confidence interval [CI] = 0.67, 0.74). Participants classified with a high predicted probability of dependency (≥20%) had higher prevalence of falls and difficulty in physical ability, and a greater risk of 1-year all-cause mortality (hazard ratio = 5.7 [95% CI = 2.5, 13]) than participants classified with a low predicted probability (<5%). Sensitivity and specificity varied across predicted probability of dependency thresholds. The Medicare claims-based algorithm showed good discrimination of phenotypic frailty and high predictive ability with adverse health outcomes. This algorithm can be used in future Medicare claims analyses to reduce confounding by frailty and improve study validity.

  14. The Multifactor Measure of Performance: Its Development, Norming, and Validation.

    Science.gov (United States)

    Bar-On, Reuven

    2018-01-01

    This article describes the development as well as the initial norming and validation of the Multifactor Measure of Performance™ (MMP™), which is a psychometric instrument that is designed to study, assess and enhance key predictors of human performance to help individuals perform at a higher level. It was created by the author, for the purpose of going beyond existing conceptual and psychometric models that often focus on relatively few factors that are purported to assess performance at school, in the workplace and elsewhere. The relative sparsity of multifactorial pre-employment assessment instruments exemplifies, for the author, one of the important reasons for developing the MMP™, which attempts to comprehensively evaluate a wider array of factors that are thought to contribute to performance. In that this situation creates a need in the area of test-construction that should be addressed, the author sought to develop a multifactorial assessment and development instrument that could concomitantly evaluate a combination of physical, cognitive, intra-personal, inter-personal, and motivational factors that significantly contribute to performance. The specific aim of this article is to show why, how and if this could be done as well as to present and discuss the potential importance of the results obtained to date. The findings presented here will hopefully add to what is known about human performance and thus contribute to the professional literature, in addition to contribute to the continued development of the MMP™. The impetus for developing the MMP™ is first explained below, followed by a detailed description of the process involved and the findings obtained; and their potential application is then discussed as well as the possible limitations of the present research and the need for future studies to address them.

  15. Measuring scientific impact beyond academia: An assessment of existing impact metrics and proposed improvements.

    Science.gov (United States)

    Ravenscroft, James; Liakata, Maria; Clare, Amanda; Duma, Daniel

    2017-01-01

    How does scientific research affect the world around us? Being able to answer this question is of great importance in order to appropriately channel efforts and resources in science. The impact by scientists in academia is currently measured by citation based metrics such as h-index, i-index and citation counts. These academic metrics aim to represent the dissemination of knowledge among scientists rather than the impact of the research on the wider world. In this work we are interested in measuring scientific impact beyond academia, on the economy, society, health and legislation (comprehensive impact). Indeed scientists are asked to demonstrate evidence of such comprehensive impact by authoring case studies in the context of the Research Excellence Framework (REF). We first investigate the extent to which existing citation based metrics can be indicative of comprehensive impact. We have collected all recent REF impact case studies from 2014 and we have linked these to papers in citation networks that we constructed and derived from CiteSeerX, arXiv and PubMed Central using a number of text processing and information retrieval techniques. We have demonstrated that existing citation-based metrics for impact measurement do not correlate well with REF impact results. We also consider metrics of online attention surrounding scientific works, such as those provided by the Altmetric API. We argue that in order to be able to evaluate wider non-academic impact we need to mine information from a much wider set of resources, including social media posts, press releases, news articles and political debates stemming from academic work. We also provide our data as a free and reusable collection for further analysis, including the PubMed citation network and the correspondence between REF case studies, grant applications and the academic literature.

  16. Measuring scientific impact beyond academia: An assessment of existing impact metrics and proposed improvements.

    Directory of Open Access Journals (Sweden)

    James Ravenscroft

    Full Text Available How does scientific research affect the world around us? Being able to answer this question is of great importance in order to appropriately channel efforts and resources in science. The impact by scientists in academia is currently measured by citation based metrics such as h-index, i-index and citation counts. These academic metrics aim to represent the dissemination of knowledge among scientists rather than the impact of the research on the wider world. In this work we are interested in measuring scientific impact beyond academia, on the economy, society, health and legislation (comprehensive impact. Indeed scientists are asked to demonstrate evidence of such comprehensive impact by authoring case studies in the context of the Research Excellence Framework (REF. We first investigate the extent to which existing citation based metrics can be indicative of comprehensive impact. We have collected all recent REF impact case studies from 2014 and we have linked these to papers in citation networks that we constructed and derived from CiteSeerX, arXiv and PubMed Central using a number of text processing and information retrieval techniques. We have demonstrated that existing citation-based metrics for impact measurement do not correlate well with REF impact results. We also consider metrics of online attention surrounding scientific works, such as those provided by the Altmetric API. We argue that in order to be able to evaluate wider non-academic impact we need to mine information from a much wider set of resources, including social media posts, press releases, news articles and political debates stemming from academic work. We also provide our data as a free and reusable collection for further analysis, including the PubMed citation network and the correspondence between REF case studies, grant applications and the academic literature.

  17. Measurement of Dietary Restraint: Validity Tests of Four Questionnaires

    Science.gov (United States)

    Williamson, Donald A.; Martin, Corby K.; York-Crowe, Emily; Anton, Stephen D.; Redman, Leanne M.; Han, Hongmei; Ravussin, Eric

    2007-01-01

    This study tested the validity of four measures of dietary restraint: Dutch Eating Behavior Questionnaire, Eating Inventory (EI), Revised Restraint Scale (RS), and the Current Dieting Questionnaire. Dietary restraint has been implicated as a determinant of overeating and binge eating. Conflicting findings have been attributed to different methods for measuring dietary restraint. The validity of four self-report measures of dietary restraint and dieting behavior was tested using: 1) factor analysis, 2) changes in dietary restraint in a randomized controlled trial of different methods to achieve calorie restriction, and 3) correlation of changes in dietary restraint with an objective measure of energy balance, calculated from the changes in fat mass and fat-free mass over a six-month dietary intervention. Scores from all four questionnaires, measured at baseline, formed a dietary restraint factor, but the RS also loaded on a binge eating factor. Based on change scores, the EI Restraint scale was the only measure that correlated significantly with energy balance expressed as a percentage of energy require d for weight maintenance. These findings suggest that that, of the four questionnaires tested, the EI Restraint scale was the most valid measure of the intent to diet and actual caloric restriction. PMID:17101191

  18. Validating an Observation Protocol to Measure Special Education Teacher Effectiveness

    Science.gov (United States)

    Johnson, Evelyn S.; Semmelroth, Carrie L.

    2015-01-01

    This study used Kane's (2013) Interpretation/Use Argument (IUA) to measure validity on the Recognizing Effective Special Education Teachers (RESET) observation tool. The RESET observation tool is designed to evaluate special education teacher effectiveness using evidence-based instructional practices as the basis for evaluation. In alignment with…

  19. Validation of the Child and Adolescent Social Perception Measure.

    Science.gov (United States)

    Koning, Cyndie; Magill-Evans, Joyce

    2001-01-01

    Compared 32 adolescent boys who had social skills deficits consistent with Asperger's Disorder to 29 controls matched on age and intelligence quotient. Significant differences were found between groups on Child and Adolescent Social Perception Measure scores, and the validity of the instrument was supported. (Contains 37 references.) (JOW)

  20. Quantitative measurement of hypertrophic scar: interrater reliability and concurrent validity.

    Science.gov (United States)

    Nedelec, Bernadette; Correa, José A; Rachelska, Grazyna; Armour, Alexis; LaSalle, Léo

    2008-01-01

    Research into the pathophysiology and treatment of hypertrophic scar (HSc) remains limited by the heterogeneity of scar and the imprecision with which its severity is measured. The objective of this study was to test the interrater reliability and concurrent validity of the Cutometer measurement of elasticity, the Mexameter measurement of erythema and pigmentation, and total thickness measure of the DermaScan C relative to the modified Vancouver Scar Scale (mVSS) in patient-matched normal skin, normal scar, and HSc. Three independent investigators evaluated 128 sites (severe HSc, moderate or mild HSc, donor site, and normal skin) on 32 burn survivors using all of the above measurement tools. The intraclass correlation coefficient, which was used to measure interrater reliability, reflects the inherent amount of error in the measure and is considered acceptable when it is >0.75. Interrater reliability of the totals of the height, pliability, and vascularity subscales of the mVSS fell below the acceptable limit ( congruent with0.50). The individual subscales of the mVSS fell well below the acceptable level (0.89) for each study site with the exception of severe scar. Mexameter and DermaScan C reliability measurements were acceptable for all sites (>0.82). Concurrent validity correlations with the mVSS were significant except for the comparison of the mVSS pliability subscale and the Cutometer maximum deformation measure comparison in severe scar. In conclusion, the Mexameter and DermaScan C measurements of scar color and thickness of all sites, as well as the Cutometer measurement of elasticity in all but the most severe scars shows high interrater reliability. Their significant concurrent validity with the mVSS confirms that these tools are measuring the same traits as the mVSS, and in a more objective way.

  1. Analysis of the existing Standard on Power performance measurement and its application in complex terrain

    International Nuclear Information System (INIS)

    Cuerva, A.

    1997-01-01

    There are some groups working on the improvement of the existing Standard and recommendation on WECS power performance measurement and analysis. One of them, besides the one working in this project, is the MEASNET expert group. This one is trying to adequate the main reference, the IEC1400-12 Ref. [9]. to the current requirements on technical quality and trueness. Within this group and the MEASNET one, many deficiencies have been detected in the procedure followed up to now. Several of them belong to general aspects of the method (calculations, assumptions, etc. ) but the most critical fact regards to the inherent characteristics of complex terrain and to the issue of site calibration and uncertainties due to it, specifically. (Author)

  2. Analysis of the existing Standard on Power performance measurement and its application in complex terrain

    Energy Technology Data Exchange (ETDEWEB)

    Cuerva, A.

    1997-10-01

    There are some groups working on the improvement of the existing Standard and recommendation on WECS power performance measurement and analysis. One of them, besides the one working in this project, is the MEASNET expert group. This one is trying to adequate the main reference, the IEC 1400-12 Re.[9]. to the current requirements on technical quality and trueness. Within this group and the MEASNET one, many deficiencies have been detected in the procedure followed up to now. Several of them belong to general aspects of the method (calculations, assumptions, etc.) but the most critical fact regards to the inherent characteristics of complex terrain and to the issue of site calibration and uncertainties due to it, specifically. (Author)

  3. Surveying dwellings with high indoor radon levels: a BRE guide to remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.

    1993-01-01

    This report is one of a series giving practical advice on methods of reducing radon levels in existing dwellings. It is aimed specifically at builders, surveyors and building specialists surveying for and prescribing remedial measures for dwellings. It supplements guidance available in The householders' guide to radon obtainable from local environmental health officers or from the Department of the Environment. The report has been prepared on the basis of experience gained in remedial work on more than 100 dwellings following advice given by BRE, and of discussions with others in the field, notably the National Radiological Protection Board (NRPB) and Cornwall County Council. Work is continuing, particularly dealing with suspended timber floors, basements and ventilation systems. Results will be incorporated into revisions of this report as they become available. (Author)

  4. Validation and Error Characterization for the Global Precipitation Measurement

    Science.gov (United States)

    Bidwell, Steven W.; Adams, W. J.; Everett, D. F.; Smith, E. A.; Yuter, S. E.

    2003-01-01

    The Global Precipitation Measurement (GPM) is an international effort to increase scientific knowledge on the global water cycle with specific goals of improving the understanding and the predictions of climate, weather, and hydrology. These goals will be achieved through several satellites specifically dedicated to GPM along with the integration of numerous meteorological satellite data streams from international and domestic partners. The GPM effort is led by the National Aeronautics and Space Administration (NASA) of the United States and the National Space Development Agency (NASDA) of Japan. In addition to the spaceborne assets, international and domestic partners will provide ground-based resources for validating the satellite observations and retrievals. This paper describes the validation effort of Global Precipitation Measurement to provide quantitative estimates on the errors of the GPM satellite retrievals. The GPM validation approach will build upon the research experience of the Tropical Rainfall Measuring Mission (TRMM) retrieval comparisons and its validation program. The GPM ground validation program will employ instrumentation, physical infrastructure, and research capabilities at Supersites located in important meteorological regimes of the globe. NASA will provide two Supersites, one in a tropical oceanic and the other in a mid-latitude continental regime. GPM international partners will provide Supersites for other important regimes. Those objectives or regimes not addressed by Supersites will be covered through focused field experiments. This paper describes the specific errors that GPM ground validation will address, quantify, and relate to the GPM satellite physical retrievals. GPM will attempt to identify the source of errors within retrievals including those of instrument calibration, retrieval physical assumptions, and algorithm applicability. With the identification of error sources, improvements will be made to the respective calibration

  5. The Tricky Art of Measuring Fossil Fuel Subsidies: A Critique of Existing Studies

    Directory of Open Access Journals (Sweden)

    Kenneth J. McKenzie

    2011-09-01

    Full Text Available Fossil fuel subsidies are of enormous import to policy-makers and public opinion, making it critical to properly define them. However, traditional methodologies tend to place subsidies in the realm of tax expenditure analysis, presenting a flawed picture. A recent report on government subsidies to the Canadian energy sector prepared for the International Institute for Sustainable Development exemplifies this flawed approach along several dimensions: it is not based on a robust underlying economic framework, it fails to account for complex interactions between tax and royalty systems in existing fiscal policy, and it uses a definition of subsidies that was created for a different purpose. The authors of this paper propose an alternative “economic view”, based on economic rents, which provides a neutral benchmark against which subsidies, royalties and other energy-focused fiscal measures can be measured. Using marginal effective tax rate (METR analysis, the authors show that it is possible to obtain a more accurate picture of energy subsidies and their impact on resource allocation and economic activity. This improved schema will ideally allow governments to better understand subsidies and devise sound policies, leading to less waste and distorted investment choices.

  6. Validation of the one pass measure for motivational interviewing competence.

    Science.gov (United States)

    McMaster, Fiona; Resnicow, Ken

    2015-04-01

    This paper examines the psychometric properties of the OnePass coding system: a new, user-friendly tool for evaluating practitioner competence in motivational interviewing (MI). We provide data on reliability and validity with the current gold-standard: Motivational Interviewing Treatment Integrity tool (MITI). We compared scores from 27 videotaped MI sessions performed by student counselors trained in MI and simulated patients using both OnePass and MITI, with three different raters for each tool. Reliability was estimated using intra-class coefficients (ICCs), and validity was assessed using Pearson's r. OnePass had high levels of inter-rater reliability with 19/23 items found from substantial to almost perfect agreement. Taking the pair of scores with the highest inter-rater reliability on the MITI, the concurrent validity between the two measures ranged from moderate to high. Validity was highest for evocation, autonomy, direction and empathy. OnePass appears to have good inter-rater reliability while capturing similar dimensions of MI as the MITI. Despite the moderate concurrent validity with the MITI, the OnePass shows promise in evaluating both traditional and novel interpretations of MI. OnePass may be a useful tool for developing and improving practitioner competence in MI where access to MITI coders is limited. Copyright © 2015. Published by Elsevier Ireland Ltd.

  7. Dwellings with cellars and basements. A BRE guide to radon remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.; Jaggs, M.P.R.

    1998-01-01

    This guide is one of a series giving practical advice on methods of reducing radon levels in existing dwellings. It is intended to help surveyors, builders and householders who are trying to reduce indoor radon levels in houses with cellars or basements. The guide is based on a large body of remedial work carried out to advice given by BRE, and on discussions with others working in the field. The measures it describes are applicable, in principle, to all dwellings and other buildings of a similar scale and construction which have cellars or basements. Contact details of other organisations referred to are listed at the back of this guide. Basements and cellars are relatively uncommon in the United Kingdom, but where they do occur they are likely to be major contributors to the radon problem within a building. Experience shows that most houses with high indoor radon levels can be remedied through the use of straightforward building works. These can be carried out by a builder or householder competent in DIY. The cost should not be excessive. Before reading this guide, for background information on radon, consult Radon: a householder's guide and Radon: a guide to reducing levels M your home, obtainable from local Environmental Health Officers or from the Department of the Environment, Transport and the Regions. The Government recommends that, if the average radon concentration in a dwelling exceeds 200 Bq/m 3 (the 'action' level), measures should be taken to reduce it. This guide assumes that radon measurements have been made in the building and that the annual average indoor radon level was shown to exceed the action level

  8. The Selective Mutism Questionnaire: Measurement Structure and Validity

    Science.gov (United States)

    Letamendi, Andrea M.; Chavira, Denise A.; Hitchcock, Carla A.; Roesch, Scott C.; Shipon-Blum, Elisa; Stein, Murray B.; Roesch, Scott C.

    2010-01-01

    Objective To evaluate the factor structure, reliability, and validity of the 17-item Selective Mutism Questionnaire. Method Diagnostic interviews were administered via telephone to 102 parents of children identified with selective mutism (SM) and 43 parents of children without SM from varying U.S. geographic regions. Children were between the ages of 3 and 11 inclusive and comprised 58% girls and 42% boys. SM diagnoses were determined using the Anxiety Disorders Interview Schedule for Children - Parent Version (ADIS-C/P); SM severity was assessed using the 17-item Selective Mutism Questionnaire (SMQ); and behavioral and affective symptoms were assessed using the Child Behavior Checklist (CBCL). An exploratory factor analysis (EFA) was conducted to investigate the dimensionality of the SMQ and a modified parallel analysis procedure was used to confirm EFA results. Internal consistency, construct validity, and incremental validity were also examined. Results The EFA yielded a 13-item solution consisting of three factors: a) Social Situations Outside of School, b) School Situations, and c) Home and Family Situations. Internal consistency of SMQ factors and total scale ranged from moderate to high. Convergent and incremental validity were also well supported. Conclusions Measure structure findings are consistent with the 3-factor solution found in a previous psychometric evaluation of the SMQ. Results also suggest that the SMQ provides useful and unique information in the prediction of SM phenomenon beyond other child anxiety measures. PMID:18698268

  9. Measures of agreement between computation and experiment:validation metrics.

    Energy Technology Data Exchange (ETDEWEB)

    Barone, Matthew Franklin; Oberkampf, William Louis

    2005-08-01

    With the increasing role of computational modeling in engineering design, performance estimation, and safety assessment, improved methods are needed for comparing computational results and experimental measurements. Traditional methods of graphically comparing computational and experimental results, though valuable, are essentially qualitative. Computable measures are needed that can quantitatively compare computational and experimental results over a range of input, or control, variables and sharpen assessment of computational accuracy. This type of measure has been recently referred to as a validation metric. We discuss various features that we believe should be incorporated in a validation metric and also features that should be excluded. We develop a new validation metric that is based on the statistical concept of confidence intervals. Using this fundamental concept, we construct two specific metrics: one that requires interpolation of experimental data and one that requires regression (curve fitting) of experimental data. We apply the metrics to three example problems: thermal decomposition of a polyurethane foam, a turbulent buoyant plume of helium, and compressibility effects on the growth rate of a turbulent free-shear layer. We discuss how the present metrics are easily interpretable for assessing computational model accuracy, as well as the impact of experimental measurement uncertainty on the accuracy assessment.

  10. The Online Social Support Scale: Measure development and validation.

    Science.gov (United States)

    Nick, Elizabeth A; Cole, David A; Cho, Sun-Joo; Smith, Darcy K; Carter, T Grace; Zelkowitz, Rachel L

    2018-05-21

    A new measure, the Online Social Support Scale, was developed based on previous theory, research, and measurement of in-person social support. It includes four subscales: Esteem/Emotional Support, Social Companionship, Informational Support, and Instrumental Support. In college and community samples, factor analytic and item response theory results suggest that subtypes of in-person social support also pertain in the online world. Evidence of reliability, convergent validity, and discriminant validity provide excellent psychometric support for the measure. Construct validity accrues to the measure vis-à-vis support for three hypotheses: (a) Various broad types of Internet platforms for social interactions are differentially associated with online social support and online victimization; (b) similar to in-person social support, online social support offsets the adverse effect of negative life events on self-esteem and depression-related outcome; and (c) online social support counteracts the effects of online victimization in much the same way that in-person friends in one social niche counterbalance rejection in other social niches. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

  11. Measure Guideline: Heat Pump Water Heaters in New and Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, C.; Puttagunta, S.; Owens, D.

    2012-02-01

    This Building America Measure Guideline is intended for builders, contractors, homeowners, and policy-makers. This document is intended to explore the issues surrounding heat pump water heaters (HPWHs) to ensure that homeowners and contractors have the tools needed to appropriately and efficiently install HPWHs. Heat pump water heaters (HPWHs) promise to significantly reduce energy consumption for domestic hot water (DHW) over standard electric resistance water heaters (ERWHs). While ERWHs perform with energy factors (EFs) around 0.9, new HPWHs boast EFs upwards of 2.0. High energy factors in HPWHs are achieved by combining a vapor compression system, which extracts heat from the surrounding air at high efficiencies, with electric resistance element(s), which are better suited to meet large hot water demands. Swapping ERWHs with HPWHs could result in roughly 50% reduction in water heating energy consumption for 35.6% of all U.S. households. This Building America Measure Guideline is intended for builders, contractors, homeowners, and policy-makers. While HPWHs promise to significantly reduce energy use for DHW, proper installation, selection, and maintenance of HPWHs is required to ensure high operating efficiency and reliability. This document is intended to explore the issues surrounding HPWHs to ensure that homeowners and contractors have the tools needed to appropriately and efficiently install HPWHs. Section 1 of this guideline provides a brief description of HPWHs and their operation. Section 2 highlights the cost and energy savings of HPWHs as well as the variables that affect HPWH performance, reliability, and efficiency. Section 3 gives guidelines for proper installation and maintenance of HPWHs, selection criteria for locating HPWHs, and highlights of important differences between ERWH and HPWH installations. Throughout this document, CARB has included results from the evaluation of 14 heat pump water heaters (including three recently released HPWH

  12. Convergent validity of two decision making style measures

    Directory of Open Access Journals (Sweden)

    Berisha, Gentrit

    2018-04-01

    Full Text Available Decision making research has witnessed a growing number of studies on individual differences and decision making styles, yet the lack of comprehensive frameworks and widely accepted measures has hindered research for a long time. There is an ongoing debate on whether individuals’ styles dynamically change across time and situations according to circumstances. Furthermore, it is an open question whether these styles are mutually exclusive. Decision style measures seek to determine one’s dominant style as well as less used styles. To our knowledge this is the first study of the convergent validity of two widely used decision making style measures: The Decision Style Inventory (DSI and the General Decision Making Style (GDMS. The direction and strength of correlation between directive, analytical, conceptual and behavioral styles as measured by DSI and rational, intuitive, dependent, avoidant and spontaneous styles as measured by GDMS have been tested. Results of the current study are compared with previous studies that have used one or both of the instruments. Correlations between styles are consistent with findings from other studies using one of the decision style measures, but the strength of correlations indicates that there is no convergent validity between DSI and GDMS.

  13. Validating precision--how many measurements do we need?

    Science.gov (United States)

    ÅSberg, Arne; Solem, Kristine Bodal; Mikkelsen, Gustav

    2015-10-01

    A quantitative analytical method should be sufficiently precise, i.e. the imprecision measured as a standard deviation should be less than the numerical definition of the acceptable standard deviation. We propose that the entire 90% confidence interval for the true standard deviation shall lie below the numerical definition of the acceptable standard deviation in order to assure that the analytical method is sufficiently precise. We also present power function curves to ease the decision on the number of measurements to make. Computer simulation was used to calculate the probability that the upper limit of the 90% confidence interval for the true standard deviation was equal to or exceeded the acceptable standard deviation. Power function curves were constructed for different scenarios. The probability of failure to assure that the method is sufficiently precise increases with decreasing number of measurements and with increasing standard deviation when the true standard deviation is well below the acceptable standard deviation. For instance, the probability of failure is 42% for a precision experiment of 40 repeated measurements in one analytical run and 7% for 100 repeated measurements, when the true standard deviation is 80% of the acceptable standard deviation. Compared to the CLSI guidelines, validating precision according to the proposed principle is more reliable, but demands considerably more measurements. Using power function curves may help when planning studies to validate precision.

  14. Measurements of Pollution In The Troposphere (MOPITT) Validation through 2006

    Science.gov (United States)

    Emmons, L. K.; Edwards, D. P.; Deeter, M. N.; Gille, J. C.; Campos, T.; Nedelec, P.; Novelli, P.; Sachse, G.

    2009-01-01

    Comparisons of aircraft measurements of carbon monoxide (CO) to the retrievals of CO using observations from the Measurements of Pollution in The Troposphere (MOPITT) instrument onboard the Terra satellite are presented. Observations made as part of the NASA INTEX-B and NSF MIRAGE field campaigns during March May 2006 are used to validate the MOPITT CO retrievals, along with routine samples from 2001 through 2006 from NOAA and the MOZAIC measurements from commercial aircraft. A significant positive bias, around 20% for total column CO, in MOPITT CO was found in the comparison to in situ measurements during 2006. Comparisons to the long-term records of measurements from NOAA and MOZAIC revealed an increasing bias in the V3 MOPITT CO retrievals over time. The impact of an instrumental drift is illustrated through retrieval simulations.

  15. Measuring awareness of financial skills: reliability and validity of a new measure.

    Science.gov (United States)

    Cramer, K; Tuokko, H A; Mateer, C A; Hultsch, D F

    2004-03-01

    This paper examines the psychometric properties of a three-part (participant, informant, and performance) Measure for assessing Awareness of Financial Skills (MAFS). The MAFS was administered to 10 seniors with dementia and 25 well-functioning seniors, and their informants. Measures of cognitive functioning, social desirability, neuroticism, and perceived control were administered to each participant to allow for an assessment of validity. Internal consistency estimates for the participant and informant questionnaires were found to be 0.92 and 0.97, respectively. Convergent validity analysis indicated that performance on this measure was related to level of cognitive functioning, with higher level of unawareness associated with decreased cognitive ability. Discriminant validity analysis showed that performance on this measure was not related to social desirability or neuroticism. This study provides evidence that the MAFS is a reliable and valid tool for assessing awareness of financial skills in older adults.

  16. Is BMI a valid measure of obesity in postmenopausal women?

    Science.gov (United States)

    Banack, Hailey R; Wactawski-Wende, Jean; Hovey, Kathleen M; Stokes, Andrew

    2018-03-01

    Body mass index (BMI) is a widely used indicator of obesity status in clinical settings and population health research. However, there are concerns about the validity of BMI as a measure of obesity in postmenopausal women. Unlike BMI, which is an indirect measure of obesity and does not distinguish lean from fat mass, dual-energy x-ray absorptiometry (DXA) provides a direct measure of body fat and is considered a gold standard of adiposity measurement. The goal of this study is to examine the validity of using BMI to identify obesity in postmenopausal women relative to total body fat percent measured by DXA scan. Data from 1,329 postmenopausal women participating in the Buffalo OsteoPerio Study were used in this analysis. At baseline, women ranged in age from 53 to 85 years. Obesity was defined as BMI ≥ 30 kg/m and body fat percent (BF%) greater than 35%, 38%, or 40%. We calculated sensitivity, specificity, positive predictive value, and negative predictive value to evaluate the validity of BMI-defined obesity relative BF%. We further explored the validity of BMI relative to BF% using graphical tools, such as scatterplots and receiver-operating characteristic curves. Youden's J index was used to determine the empirical optimal BMI cut-point for each level of BF% defined obesity. The sensitivity of BMI-defined obesity was 32.4% for 35% body fat, 44.6% for 38% body fat, and 55.2% for 40% body fat. Corresponding specificity values were 99.3%, 97.1%, and 94.6%, respectively. The empirical optimal BMI cut-point to define obesity is 24.9 kg/m for 35% BF, 26.49 kg/m for 38% BF, and 27.05 kg/m for 40% BF according to the Youden's index. Results demonstrate that a BMI cut-point of 30 kg/m does not appear to be an appropriate indicator of true obesity status in postmenopausal women. Empirical estimates of the validity of BMI from this study may be used by other investigators to account for BMI-related misclassification in older women.

  17. Reliability and validity of the Japanese version of the Community Integration Measure for community-dwelling people with schizophrenia

    OpenAIRE

    Shioda, Ai; Tadaka, Etsuko; Okochi, Ayako

    2017-01-01

    Background Community integration is an essential right for people with schizophrenia that affects their well-being and quality of life, but no valid instrument exists to measure it in Japan. The aim of the present study is to develop and evaluate the reliability and validity of the Japanese version of the Community Integration Measure (CIM) for people with schizophrenia. Methods The Japanese version of the CIM was developed as a self-administered questionnaire based on the original version of...

  18. A Measure of Perceived Chronic Social Adversity: Development and Validation

    Directory of Open Access Journals (Sweden)

    Jingqiu Zhang

    2017-12-01

    Full Text Available The goal of this study was to develop a measure that assesses negative daily social encounters. Specifically, we examined the concept of perceived chronic social adversity and its assessment, the Perceived Chronic Social Adversity Questionnaire (PCSAQ. The PCSAQ focused on the subjective processing of daily social experiences. Psychometric properties were examined within two non-clinical samples (N = 331 and N = 390 and one clinical sample (N = 86. Exploratory and confirmatory factor analyses supported a three-factor model of the PCSAQ, which corresponds to three types of daily social stressors. The final 28-item PCSAQ was shown to be internally consistent, and to have good construct validity in terms of factor structure and group differences. It was also shown to have good concurrent validity in terms of association with outcome variables (sense of control, happiness, and mood and anxiety symptoms. Perceived chronic social adversity was also shown to be correlated with PTSD severity. Taken together, these findings suggest that the PCSAQ is a reliable, valid, and useful measure that can be used to assess negative social and clinical aspects of personal experiences. This study is an important exploratory step in improving our understanding of the relationship between the cumulative effect of negative social encounters and psychological difficulty.

  19. 78 FR 69535 - Amendments to Existing Validated End-User Authorizations in the People's Republic of China

    Science.gov (United States)

    2013-11-20

    .... (Samsung China), Semiconductor Manufacturing International Corporation (SMIC), SK hynix Semiconductor..., Chair, End-User Review Committee, Bureau of Industry and Security, U.S. Department of Commerce, 14th...)'' for Validated End-User Semiconductor Manufacturing International Corporation (SMIC) This final rule...

  20. Validation of the TTM processes of change measure for physical activity in an adult French sample.

    Science.gov (United States)

    Bernard, Paquito; Romain, Ahmed-Jérôme; Trouillet, Raphael; Gernigon, Christophe; Nigg, Claudio; Ninot, Gregory

    2014-04-01

    Processes of change (POC) are constructs from the transtheoretical model that propose to examine how people engage in a behavior. However, there is no consensus about a leading model explaining POC and there is no validated French POC scale in physical activity This study aimed to compare the different existing models to validate a French POC scale. Three studies, with 748 subjects included, were carried out to translate the items and evaluate their clarity (study 1, n = 77), to assess the factorial validity (n = 200) and invariance/equivalence (study 2, n = 471), and to analyze the concurrent validity by stage × process analyses (study 3, n = 671). Two models displayed adequate fit to the data; however, based on the Akaike information criterion, the fully correlated five-factor model appeared as the most appropriate to measure POC in physical activity. The invariance/equivalence was also confirmed across genders and student status. Four of the five existing factors discriminated pre-action and post-action stages. These data support the validation of the POC questionnaire in physical activity among a French sample. More research is needed to explore the longitudinal properties of this scale.

  1. Halal Literacy: A Concept Exploration and Measurement Validation

    Directory of Open Access Journals (Sweden)

    Imam Salehudin

    2010-06-01

    Full Text Available Muslim consumers have strict commandments which guides their consumption behavior. However, Muslim individuals may have different compliance regarding the commandments. This difference in compliance may be explained by difference in halal literacy. Halal literacy is the ability to differentiate permissible (halal and forbidden (haram goods and services which came from better understanding of Islamic laws (shariah.Thus, the purpose of this paper is to explore the concept of Halal Literacy as well as to develop and validate an instrument to measure Halal Literacy for Muslim consumers. Halal literacy was measured using two methods. One method using six items of five point Likert self evaluation scale and the other using fifteen true-false test questions with an option to choose doesn’t know. Proportion of correct and incorrect was used as weights in scoring to represent the difficulty of items. Scoring results were then analyzed with Confirmatory Factor Analysis (CFA using Weighted Least Square method to test construct validity. Scores were then used to classify cases into high, moderate and low Literacy groups.Self evaluation halal literacy and switching Intentions are compared between groups using ANOVA to determine concurrent validity. Only ten out of fifteen items are considered valid using Confirmatory Factor Analysis. ANOVA showed that grouping of high, moderate and low literacy score can distinguish differences in perceived halal literacy and switching intentions between the groups. Post hoc tests and descriptive statistics revealed interesting non linear relationship between the halal literacy scores; self evaluated halal literacy and intentions to switch from products without halal labels.

  2. Psychological Capital: Convergent and discriminant validity of a reconfigured measure

    Directory of Open Access Journals (Sweden)

    Anton Grobler

    2018-04-01

    Full Text Available Background: Although attention has been given to the importance of positivity in the workplace, it has only recently been proposed as a new way in which to focus on organisational behaviour. The psychological resources which meet the criteria for positive organisational behaviour best are hope, self-efficacy, optimism and resilience.   Aim: The purpose of this study was to investigate the construct validity of the Psychological Capital Questionnaire (PCQ, with specific reference to its psychometric properties.   Setting: The sample included a total of 1749 respondents, 60 each from 30 organisations in South Africa.   Methods: A multi-factorial model was statistically explored and confirmed (with exploratory factor analysis and confirmatory factor analysis, respectively.   Results: The results support the original conceptualisation and empirically-confirmed factorial composition of Psychological Capital (PsyCap by four elements, namely Hope, Optimism, Resilience and Self-efficacy. However, the study yielded a three-factor solution, with Hope and Optimism as a combined factor and Resilience and Self-efficacy made up of a reconfigured set of substantively justifiable items (three of the original 24 items were found not to be suitable. The three reconfigured factors showed good psychometric properties, good fit (in support of construct validity and acceptable levels of convergent and discriminant validity. Recommendations were made for further studies.   Conclusion: Based on the results obtained, it seems that the PCQ is a suitable (valid and reliable instrument for measuring PsyCap. This study could thus serve as a reference for the accurate measurement of PsyCap.

  3. Validation of the Dyadic Coping Inventory with Chinese couples: Factorial structure, measurement invariance, and construct validity.

    Science.gov (United States)

    Xu, Feng; Hilpert, Peter; Randall, Ashley K; Li, Qiuping; Bodenmann, Guy

    2016-08-01

    The Dyadic Coping Inventory (DCI, Bodenmann, 2008) assesses how couples support each other when facing individual (e.g., workload) and common (e.g., parenting) stressors. Specifically, the DCI measures partners' perceptions of their own (Self) and their partners' behaviors (Partner) when facing individual stressors, and partners' common coping behaviors when facing common stressors (Common). To date, the DCI has been validated in 6 different languages from individualistic Western cultures; however, because culture can affect interpersonal interactions, it is unknown whether the DCI is a reliable measure of coping behaviors for couples living in collectivistic Eastern cultures. Based on data from 474 Chinese couples (N = 948 individuals), the current study examined the Chinese version of the DCI's factorial structure, measurement invariance (MI), and construct validity of test scores. Using 3 cultural groups (China, Switzerland, and the United States [U.S.]), confirmatory factor analysis revealed a 5-factor structure regarding Self and Partner and a 2-factor structure regarding Common dyadic coping (DC). Results from analyses of MI indicated that the DCI subscales met the criteria for configural, metric, and full/partial scalar invariance across cultures (Chinese-Swiss and Chinese-U.S.) and genders (Chinese men and women). Results further revealed good construct validity of the DCI test scores. In all, the Chinese version of the DCI can be used for measuring Chinese couples' coping behaviors, and is available for cross-cultural studies examining DC behaviors between Western and Eastern cultures. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  4. Evaporation measurement in the validation drift - part 1

    International Nuclear Information System (INIS)

    Watanabe, Kunio

    1991-01-01

    Evaporation rate distribution over the wall surface of the validation drift was detaily mapped by using an equipment newly developed. The evaporation measurement was carried out to make clear the spatial variability of the inflow rate of groundwater seeping toward the tunnel. Air in the tunnel was warmed by an electric heater during the measurement period for reducing the relative humidity of air and for drying up the wall surface. Evaporation rates from rock matrix as well as from some major fractures were measured at about 500 points. Spatial distributions of evaporation rates over the tunnel wall were obtained under two different ventilation conditions. The average evaporation rates from the rock matrix of the wall were 0.29-0.35 mg/m 2 /s under these ventilation conditions. The average evaporation rate measured on some major fractures was about 1.3 mg/m 2 /s. The maximum evaporation rate measured was 12.8 mg/m 2 /s. Some spots of high evaporation rate were clearly found along some major fractures and these spots seemed to be the special seepage ways (channels) developed in those fractures. The fracture flow is relatively small compared with the matrix flow in the inner part of the drift. This measurement was performed about 1 month after the excavation of the validation drift. Groundwater flow around the tunnel might not be in a steady state because the period between tunnel excavation and the measurement was not so long. The evaporation rate distribution under the steady state of groundwater flow will be studied in 1991. (au)

  5. Making use of an existing questionnaire to measure patient-centred ...

    African Journals Online (AJOL)

    However, the low reliability and validity of the PPOS in our environment means that the result should be interpreted with caution. Factors such as our medical students' not having had first-hand experience of the doctor-patient relationship and second-language issues may play a role. It is recommended that the PPOS not be ...

  6. Measuring Cross-Cultural Competence in Soldiers and Cadets: A Comparison of Existing Instruments

    Science.gov (United States)

    2010-11-01

    Choi, 2005; Matsumoto , Yoo, Hirayama, & Petrova, 2005) or attitudes toward specific cultural groups using Implicit Association Tests (e.g., Park, Felix...findings, Ward et al. (2009) found that CQ failed to show incremental validity beyond emotional intelligence in predicting psychological , socio- cultural ...Cracking the nonverbal code: Intercultural competence and gesture recognition across cultures . Journal of Cross- Cultural Psychology , 36, 380-395

  7. Evaporation measurement in the validation drift - part 3

    International Nuclear Information System (INIS)

    Watanabe, K.

    1991-12-01

    Two evaporation measurement series were carried out during April 3 - April 18, 1990 and May 27 . June 13, 1991 respectively in the validation drift. The first and the second measurement series were performed about one month and 14 months after the excavation, respectively. The results obtained by these measurement series are compared to each other with the aim to know the evaporation rate change during the period between these series. The evaporation rate from the matrix part of the rock mass decreased from the first measurement to the second. The average evaporation rate obtained from the second measurement series was about 1/4 of the first measurement. The frequency distribution of the evaporation rate measured in the second measurement series was more concentrated compared to the distribution of the first measurement series. The frequency distribution obtained by the second measurement seems to be approximated with a normal distribution curve. The evaporation rate from some major fractures did not decrease so much compared to the rate on the matrix part. The average rate obtained in the second measurement series on some fractures was about 80% of that of the first measurement series. The reduction of the evaporation rate may be due to the creation of an unsaturated zone around the drift. As the permeability decreases significantly when the saturation of the rock mass decreases, the evaporation rate or in the other word, the inflow rate must become smaller. An attempt was made to estimate the ratio between the matrix flow and the fracture flow. However, a detailed study is needed on unsaturated flow in rock mass for precise estimation. (au)

  8. Signal validation in nuclear power plants using redundant measurements

    International Nuclear Information System (INIS)

    Glockler, O.; Upadhyaya, B.R.; Morgenstern, V.M.

    1989-01-01

    This paper discusses the basic principles of a multivariable signal validation software system utilizing redundant sensor readings of process variables in nuclear power plants (NPPs). The technique has been tested in numerical experiments, and was applied to actual data from a pressurized water reactor (PWR). The simultaneous checking within one redundant measurement set, and the cross-checking among redundant measurement sets of dissimilar process variables, results in an algorithm capable of detecting and isolating bias-type errors. A case in point occurs when a majority of the direct redundant measurements of more than one process variable has failed simultaneously by a common-mode or correlated failures can be detected by the developed approach. 5 refs

  9. Energy efficiency in existing buildings: investment gap, incentives and supporting measures

    International Nuclear Information System (INIS)

    Varenio, Celine

    2012-01-01

    This PhD dissertation focuses on energy efficiency policies in housing. It aims at evaluating the effectiveness of public incentives designed to increase household's investment in energy efficiency of their dwelling. To reach this objective this research combines the two key dimensions of ex-post evaluation, i.e. summary and formative dimensions. The first one aims at knowing the effectiveness of public policies whereas the other one targets to understand what the public policies' consequences are and to identify ways for improvement. To reach this purpose, the research follows four steps. Firstly, it requires a detailed analysis to understand the origins of the energy efficiency gap. This gap can be explained by markets failures, consequences of bounded rationality and coordination problem between stakeholders, especially in multi-family dwellings. Secondly, the argument progresses by drawing a parallel between results from normative analysis and from observations of actual level of investments in thermal retrofit actions. It aims at identifying investment households' criteria and then at understanding how barriers to energy efficiency raise. Thirdly, thanks to the inventory of these various energy efficiency barriers it becomes possible to examine if the incentives currently implemented in France can remove them all. It appears that the national policy does not significantly reduce the energy efficiency gap. On the one hand, some barriers remain because no tool has been proposed to overcome them. On the other hand, some barriers are only partially eliminated because the practical use of tools differs from their theoretical design. Finally, using the analysis of retrofitting programs implemented on the Grenoble area this research assesses the effectiveness of additional incentives. The objective is to know to what extent these 'reinforced' policies remove barriers still existing after national tools implementation. From these four

  10. Validation Testing for Automated Solubility Measurement Equipment Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Lachut, J. S. [Washington River Protection Solutions LLC, Richland, WA (United States)

    2016-01-11

    Laboratory tests have been completed to test the validity of automated solubility measurement equipment using sodium nitrate and sodium chloride solutions (see test plan WRPS-1404441, “Validation Testing for Automated Solubility Measurement Equipment”). The sodium nitrate solution results were within 2-3% of the reference values, so the experiment is considered successful using the turbidity meter. The sodium chloride test was done by sight, as the turbidity meter did not work well using sodium chloride. For example, the “clear” turbidity reading was 53 FNU at 80 °C, 107 FNU at 55 °C, and 151 FNU at 20 °C. The sodium chloride did not work because it is granular and large; as the solution was stirred, the granules stayed to the outside of the reactor and just above the stir bar level, having little impact on the turbidity meter readings as the meter was aimed at the center of the solution. Also, the turbidity meter depth has an impact. The salt tends to remain near the stir bar level. If the meter is deeper in the slurry, it will read higher turbidity, and if the meter is raised higher in the slurry, it will read lower turbidity (possibly near zero) because it reads the “clear” part of the slurry. The sodium chloride solution results, as measured by sight rather than by turbidity instrument readings, were within 5-6% of the reference values.

  11. Validation of an inertial measurement unit for the measurement of jump count and height.

    Science.gov (United States)

    MacDonald, Kerry; Bahr, Roald; Baltich, Jennifer; Whittaker, Jackie L; Meeuwisse, Willem H

    2017-05-01

    To validate the use of an inertial measurement unit (IMU) for the collection of total jump count and assess the validity of an IMU for the measurement of jump height against 3-D motion analysis. Cross sectional validation study. 3D motion-capture laboratory and field based settings. Thirteen elite adolescent volleyball players. Participants performed structured drills, played a 4 set volleyball match and performed twelve counter movement jumps. Jump counts from structured drills and match play were validated against visual count from recorded video. Jump height during the counter movement jumps was validated against concurrent 3-D motion-capture data. The IMU device captured more total jumps (1032) than visual inspection (977) during match play. During structured practice, device jump count sensitivity was strong (96.8%) while specificity was perfect (100%). The IMU underestimated jump height compared to 3D motion-capture with mean differences for maximal and submaximal jumps of 2.5 cm (95%CI: 1.3 to 3.8) and 4.1 cm (3.1-5.1), respectively. The IMU offers a valid measuring tool for jump count. Although the IMU underestimates maximal and submaximal jump height, our findings demonstrate its practical utility for field-based measurement of jump load. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Measuring older adults' sedentary time: reliability, validity, and responsiveness.

    Science.gov (United States)

    Gardiner, Paul A; Clark, Bronwyn K; Healy, Genevieve N; Eakin, Elizabeth G; Winkler, Elisabeth A H; Owen, Neville

    2011-11-01

    With evidence that prolonged sitting has deleterious health consequences, decreasing sedentary time is a potentially important preventive health target. High-quality measures, particularly for use with older adults, who are the most sedentary population group, are needed to evaluate the effect of sedentary behavior interventions. We examined the reliability, validity, and responsiveness to change of a self-report sedentary behavior questionnaire that assessed time spent in behaviors common among older adults: watching television, computer use, reading, socializing, transport and hobbies, and a summary measure (total sedentary time). In the context of a sedentary behavior intervention, nonworking older adults (n = 48, age = 73 ± 8 yr (mean ± SD)) completed the questionnaire on three occasions during a 2-wk period (7 d between administrations) and wore an accelerometer (ActiGraph model GT1M) for two periods of 6 d. Test-retest reliability (for the individual items and the summary measure) and validity (self-reported total sedentary time compared with accelerometer-derived sedentary time) were assessed during the 1-wk preintervention period, using Spearman (ρ) correlations and 95% confidence intervals (CI). Responsiveness to change after the intervention was assessed using the responsiveness statistic (RS). Test-retest reliability was excellent for television viewing time (ρ (95% CI) = 0.78 (0.63-0.89)), computer use (ρ (95% CI) = 0.90 (0.83-0.94)), and reading (ρ (95% CI) = 0.77 (0.62-0.86)); acceptable for hobbies (ρ (95% CI) = 0.61 (0.39-0.76)); and poor for socializing and transport (ρ < 0.45). Total sedentary time had acceptable test-retest reliability (ρ (95% CI) = 0.52 (0.27-0.70)) and validity (ρ (95% CI) = 0.30 (0.02-0.54)). Self-report total sedentary time was similarly responsive to change (RS = 0.47) as accelerometer-derived sedentary time (RS = 0.39). The summary measure of total sedentary time has good repeatability and modest validity and is

  13. Enhancing rigour in the validation of patient reported outcome measures (PROMs: bridging linguistic and psychometric testing

    Directory of Open Access Journals (Sweden)

    Roberts Gwerfyl

    2012-06-01

    Full Text Available Abstract Background A strong consensus exists for a systematic approach to linguistic validation of patient reported outcome measures (PROMs and discrete methods for assessing their psychometric properties. Despite the need for robust evidence of the appropriateness of measures, transition from linguistic to psychometric validation is poorly documented or evidenced. This paper demonstrates the importance of linking linguistic and psychometric testing through a purposeful stage which bridges the gap between translation and large-scale validation. Findings Evidence is drawn from a study to develop a Welsh language version of the Beck Depression Inventory-II (BDI-II and investigate its psychometric properties. The BDI-II was translated into Welsh then administered to Welsh-speaking university students (n = 115 and patients with depression (n = 37 concurrent with the English BDI-II, and alongside other established depression and quality of life measures. A Welsh version of the BDI-II was produced that, on administration, showed conceptual equivalence with the original measure; high internal consistency reliability (Cronbach’s alpha = 0.90; 0.96; item homogeneity; adequate correlation with the English BDI-II (r = 0.96; 0.94 and additional measures; and a two-factor structure with one overriding dimension. Nevertheless, in the student sample, the Welsh version showed a significantly lower overall mean than the English (p = 0.002; and significant differences in six mean item scores. This prompted a review and refinement of the translated measure. Conclusions Exploring potential sources of bias in translated measures represents a critical step in the translation-validation process, which until now has been largely underutilised. This paper offers important findings that inform advanced methods of cross-cultural validation of PROMs.

  14. Stiff Columns as Liquefaction Mitigation Measure for Retrofit of Existing Buildings

    Directory of Open Access Journals (Sweden)

    Zaheer Ahmed Almani

    2012-10-01

    Full Text Available In this paper, ground reinforcement with jet grouted columns under shallow foundations of existing buildings was analysed using numerical modelling. This study is related with ground reinforcement by installing stiff jet grouted columns around the shallow foundations of existing building when the foundation soil is liquefied during an earthquake. The isolated shallow square footing pad supporting a typical simple frame structure was constructed on the reinforced ground with stiff jet grouted column rows at the shallow depth from the ground surface. This soil-structure system was modelled and analyzed as plane-strain using the FLAC (Fast Lagrangian Analysis of Continua 2D dynamic modelling and analysis software. The results showed that liquefaction-induced large settlement of shallow foundation of existing building can be reduced to tolerable limits by applying ground reinforcement with continuous rows vertical jet grouted columns adjacent to footing pad.

  15. Development and validation of resource flexibility measures for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Gulshan Chauhan

    2014-01-01

    Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

  16. Validation of a questionnaire measuring the regulation of autonomic function

    Directory of Open Access Journals (Sweden)

    Matthes H

    2008-06-01

    Full Text Available Abstract Background To broaden the range of outcomes that we can measure for patients undergoing treatment for oncological and other chronic conditions, we aimed to validate a questionnaire measuring self-reported autonomic regulation (aR, i.e. to characterise a subject's autonomic functioning by questions on sleeping and waking, vertigo, morningness-eveningness, thermoregulation, perspiration, bowel movements and digestion. Methods We administered the questionnaire to 440 participants (♀: N = 316, ♂: N = 124: 95 patients with breast cancer, 49 with colorectal cancer, 60 with diabetes mellitus, 39 with coronary heart disease, 28 with rheumatological conditions, 32 with Hashimoto's disease, 22 with multiple morbidities and 115 healthy people. We administered the questionnaire a second time to 50.2% of the participants. External convergence criteria included the German version of the Hospital Anxiety and Depression Scale (HADS-D, a short questionnaire on morningness-eveningness, the Herdecke Quality of Life Questionnaire (HLQ and a short version questionnaire on self-regulation. Results A principal component analysis yielded a three dimensional 18-item inventory of aR. The subscales orthostatic-circulatory, rest/activity and digestive regulation had internal consistency (Cronbach-α: rα = 0.65 – 0.75 and test-retest reliability (rrt = 0.70 – 85. AR was negatively associated with anxiety, depression, and dysmenorrhoea but positively correlated to HLQ, self-regulation and in part to morningness (except digestive aR (0.49 – 0.13, all p Conclusion An internal validation of the long-version scale of aR yielded consistent relationships with health versus illness, quality of life and personality. Further studies are required to clarify the issues of external validity, clinical and physiological relevance.

  17. Target Pilots Energy Efficiency Measures for Broad Rollout in Existing Stores

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-03-01

    Target Corporation partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce annual energy consumption by at least 30% versus requirements set by ASHRAE/ANSI/IESNA Standard 90.1-20041 as part of DOE’s Commercial Building Partnership (CBP) program.

  18. Validation of three Setswana measures for psychological wellbeing

    Directory of Open Access Journals (Sweden)

    Marié Philipina Wissing

    2010-12-01

    Research purpose: The aim of this study was therefore to explore the psychometric properties of Setswana versions of three measures of psychological wellbeing, namely the Sense of Coherence Scale (SOC (the 29-item version (Antonovsky, 1987, Satisfaction With Life Scale (SWLS (Diener, Emmons, Larson & Griffen, 1985 and Affectometer 2 (AFM (Kammann & Flett, 1983. Research design, approach and method: A cross-sectional survey design was implemented for this study. Questionnaires were translated, back-translated and evaluated in a research-committee approach. A stratified sample of 738 Setswana-speaking participants completed the questionnaires in randomly selected sites of the North West province of South Africa as part of the multi-disciplinary Transition and Health during Urbanisation of South Africans project. Reliability indices, means, standard deviations, ranges of scores, patterns of correlations and factor structures were established for all the scales. Main findings: The present Setswana SWLS and AFM are reliable and valid for use in this group, as is, to some extent, the SOC. The factor structures of the three scales were also consistent with the latent factor structures of the original scales. Practical implications: These validated measures are instruments for use in the clinical, community and work contexts of Setswana-speaking people.

  19. Validity and repeatability of inertial measurement units for measuring gait parameters.

    Science.gov (United States)

    Washabaugh, Edward P; Kalyanaraman, Tarun; Adamczyk, Peter G; Claflin, Edward S; Krishnan, Chandramouli

    2017-06-01

    Inertial measurement units (IMUs) are small wearable sensors that have tremendous potential to be applied to clinical gait analysis. They allow objective evaluation of gait and movement disorders outside the clinic and research laboratory, and permit evaluation on large numbers of steps. However, repeatability and validity data of these systems are sparse for gait metrics. The purpose of this study was to determine the validity and between-day repeatability of spatiotemporal metrics (gait speed, stance percent, swing percent, gait cycle time, stride length, cadence, and step duration) as measured with the APDM Opal IMUs and Mobility Lab system. We collected data on 39 healthy subjects. Subjects were tested over two days while walking on a standard treadmill, split-belt treadmill, or overground, with IMUs placed in two locations: both feet and both ankles. The spatiotemporal measurements taken with the IMU system were validated against data from an instrumented treadmill, or using standard clinical procedures. Repeatability and minimally detectable change (MDC) of the system was calculated between days. IMUs displayed high to moderate validity when measuring most of the gait metrics tested. Additionally, these measurements appear to be repeatable when used on the treadmill and overground. The foot configuration of the IMUs appeared to better measure gait parameters; however, both the foot and ankle configurations demonstrated good repeatability. In conclusion, the IMU system in this study appears to be both accurate and repeatable for measuring spatiotemporal gait parameters in healthy young adults. Copyright © 2017 Elsevier B.V. All rights reserved.

  20. A concise, content valid, gender invariant measure of workplace incivility.

    Science.gov (United States)

    Matthews, Russell A; Ritter, Kelsey-Jo

    2016-07-01

    The authors present a short, valid, gender invariant measure of workplace incivility that should have a high degree of utility in a variety of research designs, especially those concerned with reducing participant burden such as experience sampling and multiwave longitudinal designs. Given ongoing concerns about the psychometric properties of workplace mistreatment constructs, they validated a 4-item measure of experienced incivility based on series of 3 independent field studies (N = 2,636). In addition to retaining items on the basis of employee rated conceptual alignment (i.e., judgmental criteria) with a standard incivility definition (i.e., ambiguous intent to harm), items were also chosen based on external criteria in terms of their ability to explain incremental variance in outcomes of interest (e.g., role overload, interpersonal deviance). Items with large systematic relationships with other mistreatment constructs (i.e., abusive supervision, supervisor undermining) were excluded. In turn, the authors demonstrated that the 4-item measure is gender invariant, a critical issue that has received limited attention in the literature to date. They also experimentally investigated the effect of recall window (2 weeks, 1 month, 1 year) and found a differential pattern of effect sizes for various outcomes of interest. A fourth independent field study was conducted as a practical application of the measure within a longitudinal framework. An autoregressive model examining experienced incivility and counterproductive work behaviors was tested. Data was collected from a sample of 278 respondents at 3 time points with 1 month between assessments. Implications of these findings are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  1. Anatomy education environment measurement inventory: A valid tool to measure the anatomy learning environment.

    Science.gov (United States)

    Hadie, Siti Nurma Hanim; Hassan, Asma'; Ismail, Zul Izhar Mohd; Asari, Mohd Asnizam; Khan, Aaijaz Ahmed; Kasim, Fazlina; Yusof, Nurul Aiman Mohd; Manan Sulong, Husnaida Abdul; Tg Muda, Tg Fatimah Murniwati; Arifin, Wan Nor; Yusoff, Muhamad Saiful Bahri

    2017-09-01

    Students' perceptions of the education environment influence their learning. Ever since the major medical curriculum reform, anatomy education has undergone several changes in terms of its curriculum, teaching modalities, learning resources, and assessment methods. By measuring students' perceptions concerning anatomy education environment, valuable information can be obtained to facilitate improvements in teaching and learning. Hence, it is important to use a valid inventory that specifically measures attributes of the anatomy education environment. In this study, a new 11-factor, 132-items Anatomy Education Environment Measurement Inventory (AEEMI) was developed using Delphi technique and was validated in a Malaysian public medical school. The inventory was found to have satisfactory content evidence (scale-level content validity index [total] = 0.646); good response process evidence (scale-level face validity index [total] = 0.867); and acceptable to high internal consistency, with the Raykov composite reliability estimates of the six factors are in the range of 0.604-0.876. The best fit model of the AEEMI is achieved with six domains and 25 items (X 2  = 415.67, P education environment in Malaysia. A concerted collaboration should be initiated toward developing a valid universal tool that, using the methods outlined in this study, measures the anatomy education environment across different institutions and countries. Anat Sci Educ 10: 423-432. © 2017 American Association of Anatomists. © 2017 American Association of Anatomists.

  2. Towards validation of ammonia (NH3) measurements from the IASI satellite

    Science.gov (United States)

    Van Damme, M.; Clarisse, L.; Dammers, E.; Liu, X.; Nowak, J. B.; Clerbaux, C.; Flechard, C. R.; Galy-Lacaux, C.; Xu, W.; Neuman, J. A.; Tang, Y. S.; Sutton, M. A.; Erisman, J. W.; Coheur, P. F.

    2015-03-01

    Limited availability of ammonia (NH3) observations is currently a barrier for effective monitoring of the nitrogen cycle. It prevents a full understanding of the atmospheric processes in which this trace gas is involved and therefore impedes determining its related budgets. Since the end of 2007, the Infrared Atmospheric Sounding Interferometer (IASI) satellite has been observing NH3 from space at a high spatio-temporal resolution. This valuable data set, already used by models, still needs validation. We present here a first attempt to validate IASI-NH3 measurements using existing independent ground-based and airborne data sets. The yearly distributions reveal similar patterns between ground-based and space-borne observations and highlight the scarcity of local NH3 measurements as well as their spatial heterogeneity and lack of representativity. By comparison with monthly resolved data sets in Europe, China and Africa, we show that IASI-NH3 observations are in fair agreement, but they are characterized by a smaller variation in concentrations. The use of hourly and airborne data sets to compare with IASI individual observations allows investigations of the impact of averaging as well as the representativity of independent observations for the satellite footprint. The importance of considering the latter and the added value of densely located airborne measurements at various altitudes to validate IASI-NH3 columns are discussed. Perspectives and guidelines for future validation work on NH3 satellite observations are presented.

  3. Measurement of alienation among adolescents: construct validity of three scales on powerlessness, meaninglessness and social isolation.

    Science.gov (United States)

    Rayce, Signe Boe; Kreiner, Svend; Damsgaard, Mogens Trab; Nielsen, Tine; Holstein, Bjørn Evald

    2017-01-01

    Psychological alienation is an important concept in the study of adolescents' health and behavior but no gold standard for measuring alienation among adolescents exists. There is a need for new scales with high validity for use in adolescent health and social research. The purpose of the present study was to develop and validate alienation scales in accordance with Seeman's conceptualization of alienation focusing on three independent variants specifically relevant in adolescent health research: powerlessness, meaninglessness and social isolation. Cross-sectional data from 3083 adolescents aged 13 to 15 years from the Danish contribution to the cross-national study Health Behaviour in School-aged Children (HBSC) were used. We identified and developed items, addressed content and face validity through interviews, and examined the criterion-related construct validity of the scales using graphical loglinear Rasch models (GLLRM). The three scales each comprised three to five face valid items. The powerlessness scale reflected the adolescent's expectancy as to whether his/her behavior can determine the outcome or reinforcement he/she seeks. The meaninglessness scale reflected the expectancy as to whether satisfactory predictions regarding the effects of one's behavior are possible. Finally, the social isolation scale reflected whether the adolescent had a low expectancy for inclusion and social acceptance. All scales contained some uniform local dependency and differential item functioning. However, only to a limited degree, which could be accounted for using GLLRM. Thus the scales fitted GLLRMs and can therefore be considered to be essentially construct valid and essentially objective. The three alienation scales appear to be content and face valid and fulfill the psychometric properties of a good construct valid reflective scale. This suggests that the scales may be appropriate in future large-scale surveys to examine the relation between alienation and a range of

  4. Application of validity theory and methodology to patient-reported outcome measures (PROMs): building an argument for validity.

    Science.gov (United States)

    Hawkins, Melanie; Elsworth, Gerald R; Osborne, Richard H

    2018-07-01

    Data from subjective patient-reported outcome measures (PROMs) are now being used in the health sector to make or support decisions about individuals, groups and populations. Contemporary validity theorists define validity not as a statistical property of the test but as the extent to which empirical evidence supports the interpretation of test scores for an intended use. However, validity testing theory and methodology are rarely evident in the PROM validation literature. Application of this theory and methodology would provide structure for comprehensive validation planning to support improved PROM development and sound arguments for the validity of PROM score interpretation and use in each new context. This paper proposes the application of contemporary validity theory and methodology to PROM validity testing. The validity testing principles will be applied to a hypothetical case study with a focus on the interpretation and use of scores from a translated PROM that measures health literacy (the Health Literacy Questionnaire or HLQ). Although robust psychometric properties of a PROM are a pre-condition to its use, a PROM's validity lies in the sound argument that a network of empirical evidence supports the intended interpretation and use of PROM scores for decision making in a particular context. The health sector is yet to apply contemporary theory and methodology to PROM development and validation. The theoretical and methodological processes in this paper are offered as an advancement of the theory and practice of PROM validity testing in the health sector.

  5. Validating a new device for measuring tear evaporation rates.

    Science.gov (United States)

    Rohit, Athira; Ehrmann, Klaus; Naduvilath, Thomas; Willcox, Mark; Stapleton, Fiona

    2014-01-01

    To calibrate and validate a commercially available dermatology instrument to measure tear evaporation rate of contact lens wearers. A dermatology instrument was modified by attaching a swim goggle cup such that the cup sealed around the eye socket. Results for the unmodified instrument are dependent on probe area and enclosed volume. Calibration curves were established using a model eye, to account for individual variations in chamber volume and exposed area. Fifteen participants were recruited and the study included a contact lens wear and a no contact lens wear stage. Day and diurnal variation of the measurements were assessed by taking the measurement three times a day over 2 days. The coefficient of repeatability of the measurement was calculated and a linear mixed model assessed the influence of humidity, temperature, contact lens wear, day and diurnal variations on tear evaporation rate. The associations between variables were assessed using Pearson correlation coefficient. Absolute evaporation rates with and without contact lens wear were calculated based on the new calibration. The measurements were most repeatable during the evening with no lens wear (COR = 49 g m⁻² h) and least repeatable during the evening with contact lens wear (COR = 93 g m⁻² h). Humidity (p = 0.007), and contact lens wear (p evaporation rate. However, temperature (p = 0.54) diurnal variation (p = 0.85) and different days (p = 0.65) had no significant effect after controlling for humidity. Tear evaporation rates can be measured using a modified dermatology instrument. Measurements were higher and more variable with lens wear consistent with previous literature. Control of environmental conditions is important as a higher humidity results in a reduced evaporation rate. © 2013 The Authors Ophthalmic & Physiological Optics © 2013 The College of Optometrists.

  6. Intrapreneurial competencies: development and validation of a measurement scale

    Directory of Open Access Journals (Sweden)

    Tomás Vargas-Halabí

    2017-07-01

    Full Text Available Purpose - Few models have attempted to explain intrapreneurial behavior from the perspective of competencies. Therefore, the purpose of this paper is to contribute along this line by developing and validating a scale to measure intrapreneurial competencies for a Costa Rican organizational context. Design/methodology/approach - A three stage process was followed. The first stage considered literature review, expert judgment, cognitive interviews, and back-translation. In the second stage, the questionnaire was administered to a sample of 543 university professionals who worked mainly in private organizations in Costa Rica. The third stage led to evaluate of the proposed scale’s psychometric properties, including, exploratory factor analysis procedure performing by SPSS 19; confirmatory factor analysis procedures by means of structural equation modeling using EQS 6.2 version and finally, a linear regression model to obtain evidence of external criterion-related validity, performed by SPSS 19. Findings - This study provides evidence of five sub-dimensions of employee attributes, i.e., “opportunity promoter”, “proactivity”, “flexibility”, “drive”, and “risk taking” that constitute a higher-level construct called intrapreneurial competencies. The scale provided evidence of convergent, discriminant, and criterion-related validity – the latter, using an employee innovative behavior scale. Originality/value - The model offers a first step to continue studies that aim at developing a robust model of intrapreneurial competencies. This potential predictive capacity of an instrument of this nature would be useful for the business sector, particularly as a diagnostic instrument to strengthen processes of staff development in areas that promote the development of innovation and the creation of new businesses for the company.

  7. Validity of the Neuromuscular Recovery Scale: a measurement model approach.

    Science.gov (United States)

    Velozo, Craig; Moorhouse, Michael; Ardolino, Elizabeth; Lorenz, Doug; Suter, Sarah; Basso, D Michele; Behrman, Andrea L

    2015-08-01

    To determine how well the Neuromuscular Recovery Scale (NRS) items fit the Rasch, 1-parameter, partial-credit measurement model. Confirmatory factor analysis (CFA) and principal components analysis (PCA) of residuals were used to determine dimensionality. The Rasch, 1-parameter, partial-credit rating scale model was used to determine rating scale structure, person/item fit, point-measure item correlations, item discrimination, and measurement precision. Seven NeuroRecovery Network clinical sites. Outpatients (N=188) with spinal cord injury. Not applicable. NRS. While the NRS met 1 of 3 CFA criteria, the PCA revealed that the Rasch measurement dimension explained 76.9% of the variance. Ten of 11 items and 91% of the patients fit the Rasch model, with 9 of 11 items showing high discrimination. Sixty-nine percent of the ratings met criteria. The items showed a logical item-difficulty order, with Stand retraining as the easiest item and Walking as the most challenging item. The NRS showed no ceiling or floor effects and separated the sample into almost 5 statistically distinct strata; individuals with an American Spinal Injury Association Impairment Scale (AIS) D classification showed the most ability, and those with an AIS A classification showed the least ability. Items not meeting the rating scale criteria appear to be related to the low frequency counts. The NRS met many of the Rasch model criteria for construct validity. Copyright © 2015 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  8. Comparing the Validity of Non-Invasive Methods in Measuring Thoracic Kyphosis and Lumbar Lordosis

    Directory of Open Access Journals (Sweden)

    Mohammad Yousefi

    2012-04-01

    Full Text Available Background: the purpose of this article is to study the validity of each of the non-invasive methods (flexible ruler, spinal mouse, and processing the image versus the one through-Ray radiation (the basic method and comparing them with each other.Materials and Methods: for evaluating the validity of each of these non-invasive methods, the thoracic Kyphosis and lumber Lordosis angle of 20 students of Birjand University (age mean and standard deviation: 26±2, weight: 72±2.5 kg, height: 169±5.5 cm through fours methods of flexible ruler, spinal mouse, and image processing and X-ray.Results: the results indicated that the validity of the methods including flexible ruler, spinal mouse, and image processing in measuring the thoracic Kyphosis and lumber Lordosis angle respectively have an adherence of 0.81, 0.87, 0.73, 0.76, 0.83, 0.89 (p>0.05. As a result, regarding the gained validity against the golden method of X-ray, it could be stated that the three mentioned non-invasive methods have adequate validity. In addition, the one-way analysis of variance test indicated that there existed a meaningful relationship between the three methods of measuring the thoracic Kyphosis and lumber Lordosis, and with respect to the Tukey’s test result, the image processing method is the most precise one.Conclusion as a result, this method could be used along with other non-invasive methods as a valid measuring method.

  9. Feasibility study and uncertainties in the validation of an existing safety-related control circuit with the ISO 13849-1:2006 design standard

    International Nuclear Information System (INIS)

    Jocelyn, Sabrina; Baudoin, James; Chinniah, Yuvin; Charpentier, Philippe

    2014-01-01

    In industry, machine users and people who modify or integrate equipment often have to evaluate the safety level of a safety-related control circuit that they have not necessarily designed. The modifications or integrations may involve work to make an existing machine that does not comply with normative or regulatory specifications safe. However, how can a circuit performing a safety function be validated a posteriori? Is the validation exercise feasible? What are the difficulties and limitations of such a procedure? The aim of this article is to answer these questions by presenting a validation study of a safety function of an existing machine. A plastic injection molding machine is used for this study, as well as standard ISO 13849-1:2006. Validation consists of performing an a posteriori (post-design) estimation of the performance level of the safety function. The procedure is studied for two contexts of use of the machine: in industry, and in laboratory. The calculations required by the ISO standard were done using Excel, followed by SIStema software. It is shown that, based on the context of use, the estimated performance level was different for the same safety-related circuit. The variability in the results is explained by the assumptions made by the person undertaking the validation without the involvement of the machine designer. - Highlights: • Validation of the performance level of a safety function is undertaken. • An injection molding machine and ISO 13849-1:2006 standard are used for the procedure. • The procedure is undertaken for two contexts of use of the machine. • In this study, the performance level depends on the context of use. • The assumptions made throughout the study partially explain this difference

  10. Validation of protein carbonyl measurement: A multi-centre study

    Directory of Open Access Journals (Sweden)

    Edyta Augustyniak

    2015-04-01

    Full Text Available Protein carbonyls are widely analysed as a measure of protein oxidation. Several different methods exist for their determination. A previous study had described orders of magnitude variance that existed when protein carbonyls were analysed in a single laboratory by ELISA using different commercial kits. We have further explored the potential causes of variance in carbonyl analysis in a ring study. A soluble protein fraction was prepared from rat liver and exposed to 0, 5 and 15 min of UV irradiation. Lyophilised preparations were distributed to six different laboratories that routinely undertook protein carbonyl analysis across Europe. ELISA and Western blotting techniques detected an increase in protein carbonyl formation between 0 and 5 min of UV irradiation irrespective of method used. After irradiation for 15 min, less oxidation was detected by half of the laboratories than after 5 min irradiation. Three of the four ELISA carbonyl results fell within 95% confidence intervals. Likely errors in calculating absolute carbonyl values may be attributed to differences in standardisation. Out of up to 88 proteins identified as containing carbonyl groups after tryptic cleavage of irradiated and control liver proteins, only seven were common in all three liver preparations. Lysine and arginine residues modified by carbonyls are likely to be resistant to tryptic proteolysis. Use of a cocktail of proteases may increase the recovery of oxidised peptides. In conclusion, standardisation is critical for carbonyl analysis and heavily oxidised proteins may not be effectively analysed by any existing technique.

  11. Neighborhood walkability: field validation of geographic information system measures.

    Science.gov (United States)

    Hajna, Samantha; Dasgupta, Kaberi; Halparin, Max; Ross, Nancy A

    2013-06-01

    Given the health benefits of walking, there is interest in understanding how physical environments favor walking. Although GIS-derived measures of land-use mix, street connectivity, and residential density are commonly combined into indices to assess how conducive neighborhoods are to walking, field validation of these measures is limited. To assess the relationship between audit- and GIS-derived measures of overall neighborhood walkability and between objective (audit- and GIS-derived) and participant-reported measures of walkability. Walkability assessments were conducted in 2009. Street-level audits were conducted using a modified version of the Pedestrian Environmental Data Scan. GIS analyses were used to derive land-use mix, street connectivity, and residential density. Participant perceptions were assessed using a self-administered questionnaire. Audit, GIS, and participant-reported indices of walkability were calculated. Spearman correlation coefficients were used to assess the relationships between measures. All analyses were conducted in 2012. The correlation between audit- and GIS-derived measures of overall walkability was high (R=0.7 [95% CI=0.6, 0.8]); the correlations between objective (audit and GIS-derived) and participant-reported measures were low (R=0.2 [95% CI=0.06, 0.3]; R=0.2 [95% CI=0.04, 0.3], respectively). For comparable audit and participant-reported items, correlations were higher for items that appeared more objective (e.g., sidewalk presence, R=0.4 [95% CI=0.3, 0.5], versus safety, R=0.1 [95% CI=0.003, 0.3]). The GIS-derived measure of walkability correlated well with the in-field audit, suggesting that it is reasonable to use GIS-derived measures in place of more labor-intensive audits. Interestingly, neither audit- nor GIS-derived measures correlated well with participants' perceptions of walkability. Copyright © 2013 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  12. Validation of image cytometry for sperm concentration measurement

    DEFF Research Database (Denmark)

    Egeberg Palme, Dorte L.; Johannsen, Trine Holm; Petersen, Jørgen Holm

    2017-01-01

    Sperm concentration is an essential parameter in the diagnostic evaluation of men from infertile couples. It is usually determined by manual counting using a hemocytometer, and is therefore both laborious and subjective. We have earlier shown that a newly developed image cytometry (IC) method may...... be used to determine sperm concentration. Here we present a validation of the IC method by analysis of 4010 semen samples. There was high agreement between IC and manual counting at sperm concentrations above 3 mill/ml and in samples with concentrations above 12 mill/ml the two methods can be used...... a lower coefficient of variation than the manual method (5% vs 10%), indicating a better precision of the IC method. In conclusion, measurement of sperm concentration by IC can be used at concentrations above 3 mill/ml and seems more accurate and precise than manual counting, making it an attractive...

  13. Laplace Synthesis Validation through Measurements on Underground Transmission Cables

    Directory of Open Access Journals (Sweden)

    Uribe-Campos Felipe Alejandro

    2014-10-01

    Full Text Available Underground cable electrical parameters ZY as well as their modal propagation characteristics are highly frequency dependent which in certain cases turns its analysis difficult. To perform electromagnetic transient studies of cables the calculation of electrical parameters is essential to obtain the waves propagation solution through the multiconductor system. At the same time this requires to solve the inverse Laplace transform on a numerical form. Although the analytic Laplace transform has an indisputable accuracy, the application of its numerical version up-to-date has not been completely accepted. A complete methodology is developed in this work to guide analyst engineers or graduate students in the calculation of electromagnetic transients of underground cable systems. Finally, to help the validation of the numerical inverse Laplace transform a scaled prototype experiment is performed in the laboratory in which a transient step-response at the remote end of an energized conductor is measured.

  14. Method for Pre-Conditioning a Measured Surface Height Map for Model Validation

    Science.gov (United States)

    Sidick, Erkin

    2012-01-01

    This software allows one to up-sample or down-sample a measured surface map for model validation, not only without introducing any re-sampling errors, but also eliminating the existing measurement noise and measurement errors. Because the re-sampling of a surface map is accomplished based on the analytical expressions of Zernike-polynomials and a power spectral density model, such re-sampling does not introduce any aliasing and interpolation errors as is done by the conventional interpolation and FFT-based (fast-Fourier-transform-based) spatial-filtering method. Also, this new method automatically eliminates the measurement noise and other measurement errors such as artificial discontinuity. The developmental cycle of an optical system, such as a space telescope, includes, but is not limited to, the following two steps: (1) deriving requirements or specs on the optical quality of individual optics before they are fabricated through optical modeling and simulations, and (2) validating the optical model using the measured surface height maps after all optics are fabricated. There are a number of computational issues related to model validation, one of which is the "pre-conditioning" or pre-processing of the measured surface maps before using them in a model validation software tool. This software addresses the following issues: (1) up- or down-sampling a measured surface map to match it with the gridded data format of a model validation tool, and (2) eliminating the surface measurement noise or measurement errors such that the resulted surface height map is continuous or smoothly-varying. So far, the preferred method used for re-sampling a surface map is two-dimensional interpolation. The main problem of this method is that the same pixel can take different values when the method of interpolation is changed among the different methods such as the "nearest," "linear," "cubic," and "spline" fitting in Matlab. The conventional, FFT-based spatial filtering method used to

  15. Assessing Workplace Emotional Intelligence: Development and Validation of an Ability-based Measure.

    Science.gov (United States)

    Krishnakumar, Sukumarakurup; Hopkins, Kay; Szmerekovsky, Joseph G; Robinson, Michael D

    2016-01-01

    Existing measures of Emotional Intelligence (EI), defined as the ability to perceive, understand, and manage emotions for productive purposes, have displayed limitations in predicting workplace outcomes, likely in part because they do not target this context. Such considerations led to the development of an ability EI measure with work-related scenarios in which respondents infer the likely emotions (perception) and combinations of emotion (understanding) that would occur to protagonists while rating the effectiveness of ways of responding (management). Study 1 (n = 290 undergraduates) used item-total correlations to select scenarios from a larger pool and Study 2 (n = 578) reduced the measure-termed the NEAT-to 30 scenarios on the basis of structural equation modeling. Study 3 (n = 96) then showed that the NEAT had expected correlations with personality and cognitive ability and Study 4 (n = 85) demonstrated convergent validity with other ability EI measures. Last, study 5 (n = 91) established that the NEAT had predictive validity with respect to job satisfaction, job stress, and job performance. The findings affirm the importance of EI in the workplace in the context of a valid new instrument for assessing relevant skills.

  16. Knowledge inventory for resource efficiency measures in existing buildings; Kunskapsinventering avseende resurseffektiviserande aatgaerder inom befintlig bebyggelse

    Energy Technology Data Exchange (ETDEWEB)

    Jarnehammar, Anna; Kildsgaard, Ivana; Prejer, Erik

    2011-07-01

    The report summarizes the state of knowledge for various renovation measures of apartment buildings built between 1941-1980. The renovation potential is estimated to give half the energy use for heating and hot water. This efficiency improvement is considered possible, but not likely. There are many case studies of individual projects with theoretical calculations of renovation potential for different measures. There are relatively many general studies of the housing stock in general where the potential for various measures have been calculated for the whole of Sweden, but few studies of actual projects completed. Binding minimum requirements related to the Energy Performance of Buildings Directive (EPBD) for buildings for renovation has been introduced in several other countries in the EU which is also found to contribute to more energy-efficient measures introduced in major renovation projects. The key measures that we have found is the introduction of FTX system, renovation of the building envelope as well as individual metering and billing of heating and hot water.

  17. The measurement of multiple chronic diseases--a systematic review on existing multimorbidity indices.

    Science.gov (United States)

    Diederichs, Claudia; Berger, Klaus; Bartels, Dorothee B

    2011-03-01

    Multimorbidity, defined as the coexistence of 2 or more chronic diseases, is a common phenomenon especially in older people. Numerous efforts to establish a standardized instrument to assess the level of multimorbidity have failed until now, and indices are primarily characterized by their high heterogeneity. Thus, the objective is to provide a comprehensive overview on existing instruments on the basis of a systematic literature review. The review was performed in MedLine. All articles published between January 1, 1960 and August 31, 2009 in German or English language, with the primary focus either on the development of a weighted index or on the effect of multimorbidity on different outcomes, were identified. A total of 39 articles met the inclusion criteria. In the majority of studies (59.0%), the list of included diseases was presented without any selection criteria. Only the high prevalence of diseases (17.9%), their impact on mortality, function, and health status served as a point of reference. Information on the prevalence of chronic conditions mostly rely on self-reports. On average, the 39 indices included 18.5 diseases, ranging between 4 and 102 different conditions. Most frequently mentioned diseases were diabetes mellitus (in 97.5% of indices), followed by stroke (89.7%), hypertension, and cancer (each 84.6%). Overall, three different weighting methods could be distinguished. The systematic literature further emphasis the heterogeneity of existing multimorbidity indices. However, one important similarity is that the focus is on diseases with a high prevalence and a severe impact on affected individuals.

  18. Measuring stakeholder participation in evaluation: an empirical validation of the Participatory Evaluation Measurement Instrument (PEMI).

    Science.gov (United States)

    Daigneault, Pierre-Marc; Jacob, Steve; Tremblay, Joël

    2012-08-01

    Stakeholder participation is an important trend in the field of program evaluation. Although a few measurement instruments have been proposed, they either have not been empirically validated or do not cover the full content of the concept. This study consists of a first empirical validation of a measurement instrument that fully covers the content of participation, namely the Participatory Evaluation Measurement Instrument (PEMI). It specifically examines (1) the intercoder reliability of scores derived by two research assistants on published evaluation cases; (2) the convergence between the scores of coders and those of key respondents (i.e., authors); and (3) the convergence between the authors' scores on the PEMI and the Evaluation Involvement Scale (EIS). A purposive sample of 40 cases drawn from the evaluation literature was used to assess reliability. One author per case in this sample was then invited to participate in a survey; 25 fully usable questionnaires were received. Stakeholder participation was measured on nominal and ordinal scales. Cohen's κ, the intraclass correlation coefficient, and Spearman's ρ were used to assess reliability and convergence. Reliability results ranged from fair to excellent. Convergence between coders' and authors' scores ranged from poor to good. Scores derived from the PEMI and the EIS were moderately associated. Evidence from this study is strong in the case of intercoder reliability and ranges from weak to strong in the case of convergent validation. Globally, this suggests that the PEMI can produce scores that are both reliable and valid.

  19. Measurements of shape co-existence in $^{182,184}$Hg using Coulomb excitation

    CERN Multimedia

    Voulot, D; Paul, E S; Siem, S; Czosnyka, T; Napiorkowski, P J; Iwanicki, J S

    2007-01-01

    We propose to exploit the unique capability of ISOLDE to provide post-accelerated $^{182,184}$Hg ions from the REX facility to enable the lowest states of these nuclei to be Coulomb excited. By measuring the $\\gamma$-ray yields using the MINIBALL array we can measure the transition and diagonal E2 matrix elements for these states. This will give quantitative information about the nature of the shape coexistence in these nuclei and allow the sign of the quadrupole deformation be determined for the first time. We require 24 shifts to fulfill the aims of the experiment.

  20. Validation of radioactivity measurements under the Safe Drinking Water Act

    International Nuclear Information System (INIS)

    Goldin, Abraham S.

    1978-01-01

    Radioactivity measurements are made under the Safe Drinking Water Act to obtain information on the potential radiological hazard of water and to institute regulatory action when water quality does not meet requirements. Measurements must be both precise and accurate if these goals are to be met. Regulations issued under the act require that analyses be performed by approved (certified) laboratories, which must carry out quality assurance programs. This paper briefly describes the certification requirements and discusses the components of an effective quality assurance program. The Environmental Protection Agency has established procedures for the certification of laboratories making radioactivity measurements of drinking water. These procedures recommend minimum laboratory qualifications for personnel, facilities, equipment, and procedures; proficiency testing by analysis of samples provided by the Agency; and operation of a quality assurance program. A major function of a quality assurance program is to provide the Laboratory Director an ongoing flow of information on laboratory analytical performance. A properly designed and conducted program provides this information in a timely manner, indicates areas where discrepancies exist, and often suggests ways of correcting the discrepancies. Pertinent aspects of radioactivity measurements for drinking water are discussed, including how analyses of blanks, blind duplicates, and reference samples contribute needed information, and evaluations by control charts and statistical analyses. Examples of the usefulness of quality control in correcting both procedural and background problems are given. (author)

  1. A survey on existing challenges of BSC implementation for performance measurement

    Directory of Open Access Journals (Sweden)

    Behdad Gitinejad

    2014-04-01

    Full Text Available The balanced scorecard (BSC is a strategic oriented tool used comprehensively in profit and nonprofit organizations all over the world to synchronize routine processes of organizations to the mission and strategy, improve inner and outter communications, control organization performance toward strategic targets. BSC has emerged from a simple performance measurement framework to a comprehensive strategic management system. It changes an organization’s strategic plan from a passive document to an active guideline for the organization on a daily basis and provides a helpful assistance that not only enables performance measurements, but also helps planners identify what should be accomplished and measured. This study focuses on how BSC is adopted as a tool for measuring effectiveness of strategy implementation in these organizations. This study adapts the BSC as a powerful tool for reaching an organization’s performance in four significant areas: Financial perspective, Customer-Market perspective, Internal Processes perspective and Learning & Growth perspective. The results suggest that governmental organizations are somehow successful in achieving their objectives in various degrees.

  2. Measure Guideline. Heat Pump Water Heaters in New and Existing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, Carl [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Puttagunta, Srikanth [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Owens, Douglas [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2012-02-01

    This Building America Measure Guideline is intended for builders, contractors, homeowners, and policy-makers. This document is intended to explore the issues surrounding heat pump water heaters (HPWHs) to ensure that homeowners and contractors have the tools needed to appropriately and efficiently install HPWHs

  3. Climate for Innovation impacts on Adaptive Performance. Conceptualization, Measurement, and Validation

    Directory of Open Access Journals (Sweden)

    Stańczyk Sylwia

    2017-05-01

    Full Text Available The main objective of this paper was to examine the relationship between organizational climate for innovation and adaptive performance. The study was carried out in business organisations in Poland (N=387, representing variety of industries. The Cimate for Innovation measure and Individual Adaptive Performance measure was adopted from previous studies. The results of presented research point out that certain measurements of the organizational climate for innovation are interrelated to adaptive performance, especially supervisory encouragement. The present study discusses some aspects concerning the adaptation of existing instruments and measurements. On the basis of the research presented we indicate that, in general, the adaptation, of the mesearuments were relatively effective. The questionnaire was assessed as to be valid in terms of content for the reseraching CI and AP aspects in Poland.

  4. Technical Aspects and Validation of a New Biofeedback System for Measuring Lower Limb Loading in the Dynamic Situation

    NARCIS (Netherlands)

    Raaben, Marco; Holtslag, Herman R.; Augustine, Robin; van Merkerk, Rutger O.; Koopman, Bart F. J. M.; Blokhuis, Taco J.

    2017-01-01

    A variety of techniques for measuring lower limb loading exists, each with their own limitations. A new ambulatory biofeedback system was developed to overcome these limitations. In this study, we described the technical aspects and validated the accuracy of this system. A bench press was used to

  5. Technical Aspects and Validation of a New Biofeedback System for Measuring Lower Limb Loading in the Dynamic Situation

    NARCIS (Netherlands)

    Raaben, M.; Holtslag, H.R.; Augustine, R.; van Merkerk, R.O.; Koopman, Hubertus F.J.M.; Blokhuis, T.J.

    2017-01-01

    Background: A variety of techniques for measuring lower limb loading exists, each with their own limitations. A new ambulatory biofeedback system was developed to overcome these limitations. In this study, we described the technical aspects and validated the accuracy of this system. Methods: A bench

  6. Impurity Correction Techniques Applied to Existing Doping Measurements of Impurities in Zinc

    Science.gov (United States)

    Pearce, J. V.; Sun, J. P.; Zhang, J. T.; Deng, X. L.

    2017-01-01

    Impurities represent the most significant source of uncertainty in most metal fixed points used for the realization of the International Temperature Scale of 1990 (ITS-90). There are a number of different methods for quantifying the effect of impurities on the freezing temperature of ITS-90 fixed points, many of which rely on an accurate knowledge of the liquidus slope in the limit of low concentration. A key method of determining the liquidus slope is to measure the freezing temperature of a fixed-point material as it is progressively doped with a known amount of impurity. Recently, a series of measurements of the freezing and melting temperature of `slim' Zn fixed-point cells doped with Ag, Fe, Ni, and Pb were presented. Here, additional measurements of the Zn-X system are presented using Ga as a dopant, and the data (Zn-Ag, Zn-Fe, Zn-Ni, Zn-Pb, and Zn-Ga) have been re-analyzed to demonstrate the use of a fitting method based on Scheil solidification which is applied to both melting and freezing curves. In addition, the utility of the Sum of Individual Estimates method is explored with these systems in the context of a recently enhanced database of liquidus slopes of impurities in Zn in the limit of low concentration.

  7. Validation of Storm Water Management Model Storm Control Measures Modules

    Science.gov (United States)

    Simon, M. A.; Platz, M. C.

    2017-12-01

    EPA's Storm Water Management Model (SWMM) is a computational code heavily relied upon by industry for the simulation of wastewater and stormwater infrastructure performance. Many municipalities are relying on SWMM results to design multi-billion-dollar, multi-decade infrastructure upgrades. Since the 1970's, EPA and others have developed five major releases, the most recent ones containing storm control measures modules for green infrastructure. The main objective of this study was to quantify the accuracy with which SWMM v5.1.10 simulates the hydrologic activity of previously monitored low impact developments. Model performance was evaluated with a mathematical comparison of outflow hydrographs and total outflow volumes, using empirical data and a multi-event, multi-objective calibration method. The calibration methodology utilized PEST++ Version 3, a parameter estimation tool, which aided in the selection of unmeasured hydrologic parameters. From the validation study and sensitivity analysis, several model improvements were identified to advance SWMM LID Module performance for permeable pavements, infiltration units and green roofs, and these were performed and reported herein. Overall, it was determined that SWMM can successfully simulate low impact development controls given accurate model confirmation, parameter measurement, and model calibration.

  8. An exploratory sequential design to validate measures of moral emotions.

    Science.gov (United States)

    Márquez, Margarita G; Delgado, Ana R

    2017-05-01

    This paper presents an exploratory and sequential mixed methods approach in validating measures of knowledge of the moral emotions of contempt, anger and disgust. The sample comprised 60 participants in the qualitative phase when a measurement instrument was designed. Item stems, response options and correction keys were planned following the results obtained in a descriptive phenomenological analysis of the interviews. In the quantitative phase, the scale was used with a sample of 102 Spanish participants, and the results were analysed with the Rasch model. In the qualitative phase, salient themes included reasons, objects and action tendencies. In the quantitative phase, good psychometric properties were obtained. The model fit was adequate. However, some changes had to be made to the scale in order to improve the proportion of variance explained. Substantive and methodological im-plications of this mixed-methods study are discussed. Had the study used a single re-search method in isolation, aspects of the global understanding of contempt, anger and disgust would have been lost.

  9. The potential of ground gravity measurements to validate GRACE data

    Directory of Open Access Journals (Sweden)

    D. Crossley

    2003-01-01

    Full Text Available New satellite missions are returning high precision, time-varying, satellite measurements of the Earth’s gravity field. The GRACE mission is now in its calibration/- validation phase and first results of the gravity field solutions are imminent. We consider here the possibility of external validation using data from the superconducting gravimeters in the European sub-array of the Global Geodynamics Project (GGP as ‘ground truth’ for comparison with GRACE. This is a pilot study in which we use 14 months of 1-hour data from the beginning of GGP (1 July 1997 to 30 August 1998, when the Potsdam instrument was relocated to South Africa. There are 7 stations clustered in west central Europe, and one station, Metsahovi in Finland. We remove local tides, polar motion, local and global air pressure, and instrument drift and then decimate to 6-hour samples. We see large variations in the time series of 5–10µgal between even some neighboring stations, but there are also common features that correlate well over the 427-day period. The 8 stations are used to interpolate a minimum curvature (gridded surface that extends over the geographical region. This surface shows time and spatial coherency at the level of 2– 4µgal over the first half of the data and 1–2µgal over the latter half. The mean value of the surface clearly shows a rise in European gravity of about 3µgal over the first 150 days and a fairly constant value for the rest of the data. The accuracy of this mean is estimated at 1µgal, which compares favorably with GRACE predictions for wavelengths of 500 km or less. Preliminary studies of hydrology loading over Western Europe shows the difficulty of correlating the local hydrology, which can be highly variable, with large-scale gravity variations.Key words. GRACE, satellite gravity, superconducting gravimeter, GGP, ground truth

  10. The Perseverative Thinking Questionnaire (PTQ): validation of a content-independent measure of repetitive negative thinking.

    Science.gov (United States)

    Ehring, Thomas; Zetsche, Ulrike; Weidacker, Kathrin; Wahl, Karina; Schönfeld, Sabine; Ehlers, Anke

    2011-06-01

    Repetitive negative thinking (RNT) has been found to be involved in the maintenance of several types of emotional problems and has therefore been suggested to be a transdiagnostic process. However, existing measures of RNT typically focus on a particular disorder-specific content. In this article, the preliminary validation of a content-independent self-report questionnaire of RNT is presented. The 15-item Perseverative Thinking Questionnaire was evaluated in two studies (total N = 1832), comprising non-clinical as well as clinical participants. Results of confirmatory factor analyses across samples supported a second-order model with one higher-order factor representing RNT in general and three lower-order factors representing (1) the core characteristics of RNT (repetitiveness, intrusiveness, difficulties with disengagement), (2) perceived unproductiveness of RNT and (3) RNT capturing mental capacity. High internal consistencies and high re-test reliability were found for the total scale and all three subscales. The validity of the Perseverative Thinking Questionnaire was supported by substantial correlations with existing measures of RNT and associations with symptom levels and clinical diagnoses of depression and anxiety. Results suggest the usefulness of the new measure for research into RNT as a transdiagnostic process. Copyright © 2010 Elsevier Ltd. All rights reserved.

  11. Applicability and economic efficiency of earthquake retrofit measures on existing buildings in Bucharest, Romania

    Science.gov (United States)

    Bostenaru, M.

    2009-04-01

    The research discussed in this contribution contains two aspects: on one side the economic efficiency of seismic retrofit measures, and on the other their applicability. The research was limited to housing buildings. Bucharest, the capital of Romania, was the object of the research. Strong earthquakes affect Bucharest about three times in a century, the damaging earthquakes of the 20th century being in 1940 and 1977. Other strong earthquakes occurred in 1986 and 1990. Since it is a broad topic, first the building type was determined, which should serve further research. For this scope the building types of the 20th century, which are common in Bucharest, Romania, were investigated. For each building type reports have been written, which comprised the earthquake resilient features, the seismic defficiencies, the damage patterns and the retrofit measures. Each of these features was listed for elements of the building. A first result of the research was an integrated system in order to include latter aspects in the planning in the first steps. So already at the building survey attention has to be paid on how a building is subdivided in order to be able to determine the economic efficiency of the planned action. So were defined the `retrofit elements`. In a first step the characteristics were defined, through which these retrofit elements (for example column, wall part between two windows) can be recognised in the building survey. In a further one, which retrofit measures can be connected to these. Diagrams were built, in order to visualise these findings. For each retrofit element and the corresponding measure the costs were calculated. Also, these retrofit elements and the measures connected to them were modelled for the simulation with the structural software, so that the benefit of the measures could be determined. In the part which regarded the economic efficiency, benefits and costs of retrofit measures had to be compared, so the improvement in the rigidity

  12. Protocol: validation of the INCODE barometer to measure the innovation compe-tence through the Rasch Measurement Theory

    Directory of Open Access Journals (Sweden)

    Lidia Sanchez

    2017-06-01

    Full Text Available This communication presents a protocol in order to show the different phases that must be followed in order to validate the INCODE barometer, which is used to measure the innovation competence, with Rasch Measurement Theory. Five phases are stated: dimensionality analysis, individual reliability and validity analysis of ítems and persons, global reliability and validity analysis, and cathegory analysis.

  13. Measuring Transit Oriented Development of Existing Urban Areas around Metro Stations in Faridabad City

    Directory of Open Access Journals (Sweden)

    Sat Pal

    2018-01-01

    Full Text Available Urban population in Indian cities is encouraging auto reliance and having unsafe economic, social and environmental consequences. Land-use-change patterns are the outcome of the complex relations between the human and the physical surroundings. To address these issues the planners are moving beyond land use planning to a sustainable development. Transit and Land use planning are important components to achieve sustainable future of urban development. TOD is a planning tool to encourage this integration. This paper discusses the land use scenario and opportunity around four Metro transit stations in Faridabad city. Different methods and various sets of indicators are considered to evaluate and measure TOD index in this study. This study will evaluate and measure the Faridabad city in the context of land use around Metro Stations to support TOD. This paper seeks to answer how to promote walkable communities, compact and transit-oriented development (TOD that incorporates mixed land use development, including neighbourhood schools, retail and business related space and a mix range of housing types within walkable distance. This paper concludes that the stations area which had a low TOD score needs to have policy for improvement. If planned efficiently, TODs can realize the sustainable development with considerable change in the urban development that focuses on pedestrian based neighbourhood planning.

  14. Evaluation of Modeled and Measured Energy Savings in Existing All Electric Public Housing in the Pacific Northwest

    Energy Technology Data Exchange (ETDEWEB)

    Gordon, Andrew [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Lubliner, Michael [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Howard, Luke [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Kunkle, Rick [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Salzberg, Emily [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States)

    2014-04-01

    This project analyzes the cost effectiveness of energy savings measures installed by a large public housing authority in Salishan, a community in Tacoma Washington. Research focuses on the modeled and measured energy usage of the first six phases of construction, and compares the energy usage of those phases to phase 7. Market-ready energy solutions were also evaluated to improve the efficiency of affordable housing for new and existing (built since 2001) affordable housing in the marine climate of Washington State.

  15. Surveying dwellings with high indoor radon levels: a BRE guide to radon remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.

    1993-01-01

    This report is one of a series giving practical advice on methods of reducing radom levels in existing dwellings. It is aimed specifically at builders, surveyors and building specialists surveying for and prescribing remedial measures for dwellings. It supplements guidance available in 'The householders' guide to radon, obtainable from local environmental health officers or from the Department of the Environment. (Author)

  16. Mapping the EORTC QLQ-C30 onto the EQ-5D-3L: assessing the external validity of existing mapping algorithms.

    Science.gov (United States)

    Doble, Brett; Lorgelly, Paula

    2016-04-01

    To determine the external validity of existing mapping algorithms for predicting EQ-5D-3L utility values from EORTC QLQ-C30 responses and to establish their generalizability in different types of cancer. A main analysis (pooled) sample of 3560 observations (1727 patients) and two disease severity patient samples (496 and 93 patients) with repeated observations over time from Cancer 2015 were used to validate the existing algorithms. Errors were calculated between observed and predicted EQ-5D-3L utility values using a single pooled sample and ten pooled tumour type-specific samples. Predictive accuracy was assessed using mean absolute error (MAE) and standardized root-mean-squared error (RMSE). The association between observed and predicted EQ-5D utility values and other covariates across the distribution was tested using quantile regression. Quality-adjusted life years (QALYs) were calculated using observed and predicted values to test responsiveness. Ten 'preferred' mapping algorithms were identified. Two algorithms estimated via response mapping and ordinary least-squares regression using dummy variables performed well on number of validation criteria, including accurate prediction of the best and worst QLQ-C30 health states, predicted values within the EQ-5D tariff range, relatively small MAEs and RMSEs, and minimal differences between estimated QALYs. Comparison of predictive accuracy across ten tumour type-specific samples highlighted that algorithms are relatively insensitive to grouping by tumour type and affected more by differences in disease severity. Two of the 'preferred' mapping algorithms suggest more accurate predictions, but limitations exist. We recommend extensive scenario analyses if mapped utilities are used in cost-utility analyses.

  17. A Measure of Market Orientation: Development and Validation in a Different Cultural Context

    Directory of Open Access Journals (Sweden)

    José Miguel Ospina

    2013-09-01

    Full Text Available For several decades, researchers and marketing practitioners have proclaimed that the adoption of a consumer-oriented philosophy is the key to developing and maintaining a sustainable competitive advantage for a business operating in a highly competitive environment. The interest shown has not been sufficient to dispel certain concerns about the construct’s domain, and the methodology followed for measuring it in different cultural contexts. This paper examines the reliability and validity of three scales for measuring market orientation in a Spanish-speaking international context. The results confirm those obtained from previous research efforts. The study of the three scales, when combined, suggests the existence of six dimensions that are measurable with eighteen items.

  18. Testing and Validation of the Dynamic Inertia Measurement Method

    Science.gov (United States)

    Chin, Alexander W.; Herrera, Claudia Y.; Spivey, Natalie D.; Fladung, William A.; Cloutier, David

    2015-01-01

    The Dynamic Inertia Measurement (DIM) method uses a ground vibration test setup to determine the mass properties of an object using information from frequency response functions. Most conventional mass properties testing involves using spin tables or pendulum-based swing tests, which for large aerospace vehicles becomes increasingly difficult and time-consuming, and therefore expensive, to perform. The DIM method has been validated on small test articles but has not been successfully proven on large aerospace vehicles. In response, the National Aeronautics and Space Administration Armstrong Flight Research Center (Edwards, California) conducted mass properties testing on an "iron bird" test article that is comparable in mass and scale to a fighter-type aircraft. The simple two-I-beam design of the "iron bird" was selected to ensure accurate analytical mass properties. Traditional swing testing was also performed to compare the level of effort, amount of resources, and quality of data with the DIM method. The DIM test showed favorable results for the center of gravity and moments of inertia; however, the products of inertia showed disagreement with analytical predictions.

  19. Design and validation of a questionnaire for measuring perceived risk of skin cancer.

    Science.gov (United States)

    Morales-Sánchez, M A; Peralta-Pedrero, M L; Domínguez-Gómez, M A

    2014-04-01

    A perceived risk of cancer encourages preventive behavior while the lack of such a perception is a barrier to risk reduction. There are no instruments in Spanish to measure this perceived risk and thus quantify response to interventions for preventing this disease at a population level. The aim of this study was to design and validate a self-administered questionnaire for measuring the perceived risk of skin cancer. A self-administered questionnaire with a visual Likert-type scale was designed based on the results of the analysis of the content of a survey performed in 100 patients in the Dr. Ladislao de la Pascua Skin Clinic, Distrito Federal México, Mexico. Subsequently, the questionnaire was administered to a sample of 359 adult patients who attended the clinic for the first time. As no gold standard exists for measuring the perceived risk of skin cancer, the construct was validated through factor analysis. The final questionnaire had 18 items. The internal consistency measured with Cronbach α was 0.824 overall. In the factor analysis, 4 factors (denoted as affective, behavioral, severity, and susceptibility) and an indicator of risk accounted for 65.133% of the variance. The psychometric properties of the scale were appropriate for measuring the perception of risk in adult patients (aged 18 years or more) who attended the dermatology clinic. Copyright © 2013 Elsevier España, S.L. and AEDV. All rights reserved.

  20. Development and Validation of the Marijuana Motives Measure Short Form.

    Science.gov (United States)

    Mezquita, Laura; Ruiz-Valero, Lucía; Martínez-Gómez, Naiara; Ibáñez, Manuel I; Ortet, Generós

    2018-01-15

    Marijuana motives are a proximal variable to marijuana use. This research aimed to adapt and validate the short form of the Marijuana Motives Measure (MMM; Simons, Correia, Carey, y Borsari, 1998), the MMM SF, in Spanish.  The sample comprised 232 participants (mean age = 25.11 (7.58), 50.43% males) who had tried marijuana at least once in their lifetime. Item and Rasch analyses were performed to choose the final pool of 15 items. Confirmatory Factor Analysis (CFA) showed an adequate 5-factor structure (S-BX2(80) = 121.30, p = .002; NNFI = .944; CFI = .958; IFI = .959; MFI = .915; RMSEA = .047(0.029, 0.063); AIC = -38.70), and the multi-group CFA between males and females showed acceptable fit indices (S-BX2(160) = 230.01, p = .000; NNFI = .900; CFI = .924; IFI = .927; MFI = .860; RMSEA = .062(.043, .078); AIC = -89.99). The questionnaire indicated metric (S-BX2diff (15) = 13.61, p = .556)), scalar (S-BX2diff (15) = 23.15, p = .081)) and error measurement invariance (S-BX2diff (15) = 8.65, p = .895)) between gender groups. The internal consistencies and ordinal omega of the scales were between .79 and .90. In the regression analysis, enhancement, coping and low conformity motives predicted frequency and quantity of marijuana smoked. The best predictor of frequency and quantity consumed during the heaviest smoking period was enhancement, while coping and, to a lesser extent, low conformity, were the only predictors of cannabis-related problems when marijuana frequency and quantity were controlled for.  The MMM SF shows adequate psychometric properties and is a suitable instrument to assess marijuana motives, especially during time-limited sessions.

  1. Toward a Measure of Accountability in Nursing: A Three-Stage Validation Study.

    Science.gov (United States)

    Drach-Zahavy, Anat; Leonenko, Marina; Srulovici, Einav

    2018-06-04

    To develop and psychometrically evaluate a three-dimensional questionnaire suitable for evaluating personal and organizational accountability in nurses. Accountability is defined as a three-dimensional value, directing professionals to take responsibility for their decisions and actions, to be willing to explain them (transparency) and to be judged according to society's accepted values (answerability). Despite the relatively clear definition, measurement of accountability lags well behind. Existing self-report questionnaires do not fully capture the complexity of the concept; nor do they capture the different sources of accountability (e.g., personal accountability, organizational accountability). A three-stage measure development. Data were collected during 2015-2016. In Phase 1, an initial database of items (N = 74) was developed, based on literature review and qualitative study, establishing face and content validity. In Phase 2, the face, content, construct and criterion-related validity of the initial questionnaires (19 items for personal and organizational accountability questionnaire) was established with a sample of 229 nurses. In Phase 3, the final questionnaires (19 items each) were validated with a new sample of 329 nurses and established construct validity. The final version of the instruments comprised 19 items, suitable for assessing personal and organizational accountability. The questionnaire referred to the dimensions of responsibility, transparency and answerability. The findings established the instrument's content, construct and criterion-related validity, as well as good internal reliability. The questionnaire portrays accountability in nursing, by capturing nurses' subjective perceptions of accountability dimensions (responsibility, transparency, answerability), as demonstrated by personal and organizational values. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  2. Towards Validating Risk Indicators Based on Measurement Theory (Extended version)

    NARCIS (Netherlands)

    Morali, A.; Wieringa, Roelf J.

    Due to the lack of quantitative information and for cost-efficiency, most risk assessment methods use partially ordered values (e.g. high, medium, low) as risk indicators. In practice it is common to validate risk indicators by asking stakeholders whether they make sense. This way of validation is

  3. MEASURING INSTRUMENT CONSTRUCTION AND VALIDATION IN ESTIMATING UNICYCLING SKILL LEVEL

    Directory of Open Access Journals (Sweden)

    Ivan Granić

    2012-09-01

    Full Text Available Riding the unicycle presupposes the knowledge of the set of elements which describe motoric skill, or just part of that set with which we could measure the level of that knowledge. Testing and evaluation of the elements is time consuming. In order to design a unique, composite measuring instrument, to facilitate the evaluation of the initial level of unicycling skill, we tested 17 recreative subjects who were learning to ride the unicycle in 15 hours of training, without any previous knowledge or experience what was measured before the beginning of the training. At the beginning and at the end of the training they were tested with the set of the 12 riding elements test that was carried out to record only successful attempts, followed by unique SLALOM test which include previously tested elements. It was found that the unique SLALOM test has good metric features and a high regression coefficient showed that the SLALOM could be used instead of the 12 elements of unicycle riding skill, and it could be used as a uniform test to evaluate learned or existing knowledge. Because of its simplicity in terms of action and simultaneous testing of more subjects, the newly constructed test could be used in evaluating the unicycling recreational level, but also for monitoring and programming transformation processes to develop the motor skills of riding of unicycle. Because of its advantages, it is desirable to include unicycling in the educational processes of learning new motor skills, which can be evaluated by the results of this research. The obtained results indicate that the unicycle should be seriously consider as a training equipment to “refresh” or expand the recreational programs, without any fear that it is just for special people. Namely, it was shown that the previously learned motor skills (skiing, roller-skating, and cycling had no effect on the results of final testing.

  4. Validity and reliability of the Palliative Care Transition Measure for Caregivers (PCTM-C).

    Science.gov (United States)

    D'Angelo, Daniela; Mastroianni, Chiara; Artico, Marco; Biagioli, Valentina; Latina, Roberto; Guarda, Michela; Piredda, Michela; De Marinis, Maria Grazia

    2018-01-21

    Patients suffering from advanced disease face different care transitions. The transition from acute to palliative care is challenging and may lead to the discontinuity of care. Family caregivers become important sources of information, as patients begin to experience difficulties in coping with emotional transition events. The Care Transition Measure was developed to evaluate care transitions as experienced by the elderly. It has never been used in palliative care. The aim of this study was to test the validity and reliability of a modified version of the Palliative Care Transition Measure, specifically the Palliative Care Transition Measure for Caregivers (PCTM-C). The study included two main phases. Phase I focused on the construction of a modified version of the Palliative Care Transition Measure through two focus groups and by computing the content validity index. Phase II focused on testing the psychometric properties of the PCTM-C on 272 family caregivers through confirmatory factor analysis. Result The content validity index for each of the items was higher than 0.80, whereas that for the scale was 0.95. The model tested with confirmatory factor analysis fitted the data well and confirmed that the transition measures referred to communication, integrated care and a trusting-relationship, and therefore the core dimensions of continuity according to existing conceptual models. The internal consistency was high (Cronbach's alpha = 0.94). Significance of results The PCTM-C proved to be a suitable measure of the quality of such transitions. It may be used in clinical practice as a continuity quality indicator and has the potential to guide interventions to enhance family caregivers' experience of care continuity.

  5. Validation of the GOES-16 magnetometer using multipoint measurements and magnetic field models

    Science.gov (United States)

    Califf, S.; Loto'aniu, P. T. M.; Redmon, R. J.; Sarris, T. E.; Brito, T.

    2017-12-01

    The Geostationary Operational Environmental Satellites (GOES) have been providing continuous geomagnetic field measurements for over 40 years. While the primary purpose of GOES is operational, the magnetometer data are also widely used in the scientific community. In an effort to validate the recently launched GOES-16 magnetometer, we compare the measurements to existing magnetic field models and other GOES spacecraft currently on orbit. There are four concurrent measurements from GOES-13, 14, 15 and 16 spanning 75W to 135W longitude. Also, GOES-13 is being replaced by GOES-16 in the GOES-East location, and during the transition, GOES-13 and GOES-16 will be parked nearby in order to assist with calibration of the new operational satellite. This work explores techniques to quantify the performance of the GOES-16 magnetometer by comparison to data from nearby spacecraft. We also build on previous work to assimilate in situ measurements with existing magnetic field models to assist in comparing data from different spatial locations. Finally, we use this unique dataset from four simultaneous geosynchronous magnetometer measurements and the close separation between GOES-13 and GOES-16 to study the spatial characteristics of ULF waves and other magnetospheric processes.

  6. Validation of an arterial tortuosity measure with application to hypertension collection of clinical hypertensive patients.

    Science.gov (United States)

    Diedrich, Karl T; Roberts, John A; Schmidt, Richard H; Kang, Chang-Ki; Cho, Zang-Hee; Parker, Dennis L

    2011-10-18

    Hypertension may increase tortuosity or twistedness of arteries. We applied a centerline extraction algorithm and tortuosity metric to magnetic resonance angiography (MRA) brain images to quantitatively measure the tortuosity of arterial vessel centerlines. The most commonly used arterial tortuosity measure is the distance factor metric (DFM). This study tested a DFM based measurement's ability to detect increases in arterial tortuosity of hypertensives using existing images. Existing images presented challenges such as different resolutions which may affect the tortuosity measurement, different depths of the area imaged, and different artifacts of imaging that require filtering. The stability and accuracy of alternative centerline algorithms was validated in numerically generated models and test brain MRA data. Existing images were gathered from previous studies and clinical medical systems by manually reading electronic medical records to identify hypertensives and negatives. Images of different resolutions were interpolated to similar resolutions. Arterial tortuosity in MRA images was measured from a DFM curve and tested on numerically generated models as well as MRA images from two hypertensive and three negative control populations. Comparisons were made between different resolutions, different filters, hypertensives versus negatives, and different negative controls. In tests using numerical models of a simple helix, the measured tortuosity increased as expected with more tightly coiled helices. Interpolation reduced resolution-dependent differences in measured tortuosity. The Korean hypertensive population had significantly higher arterial tortuosity than its corresponding negative control population across multiple arteries. In addition one negative control population of different ethnicity had significantly less arterial tortuosity than the other two. Tortuosity can be compared between images of different resolutions by interpolating from lower to higher

  7. Validation of Patient-Reported Outcomes Measurement Information System (PROMIS) computerized adaptive tests in cervical spine surgery.

    Science.gov (United States)

    Boody, Barrett S; Bhatt, Surabhi; Mazmudar, Aditya S; Hsu, Wellington K; Rothrock, Nan E; Patel, Alpesh A

    2018-03-01

    OBJECTIVE The Patient-Reported Outcomes Measurement Information System (PROMIS), which is funded by the National Institutes of Health, is a set of adaptive, responsive assessment tools that measures patient-reported health status. PROMIS measures have not been validated for surgical patients with cervical spine disorders. The objective of this project is to evaluate the validity (e.g., convergent validity, known-groups validity, responsiveness to change) of PROMIS computer adaptive tests (CATs) for pain behavior, pain interference, and physical function in patients undergoing cervical spine surgery. METHODS The legacy outcome measures Neck Disability Index (NDI) and SF-12 were used as comparisons with PROMIS measures. PROMIS CATs, NDI-10, and SF-12 measures were administered prospectively to 59 consecutive tertiary hospital patients who were treated surgically for degenerative cervical spine disorders. A subscore of NDI-5 was calculated from NDI-10 by eliminating the lifting, headaches, pain intensity, reading, and driving sections and multiplying the final score by 4. Assessments were administered preoperatively (baseline) and postoperatively at 6 weeks and 3 months. Patients presenting for revision surgery, tumor, infection, or trauma were excluded. Participants completed the measures in Assessment Center, an online data collection tool accessed by using a secure login and password on a tablet computer. Subgroup analysis was also performed based on a primary diagnosis of either cervical radiculopathy or cervical myelopathy. RESULTS Convergent validity for PROMIS CATs was supported with multiple statistically significant correlations with the existing legacy measures, NDI and SF-12, at baseline. Furthermore, PROMIS CATs demonstrated known-group validity and identified clinically significant improvements in all measures after surgical intervention. In the cervical radiculopathy and myelopathic cohorts, the PROMIS measures demonstrated similar responsiveness to the

  8. Reliability and Validity of Selected PROMIS Measures in People with Rheumatoid Arthritis.

    Directory of Open Access Journals (Sweden)

    Susan J Bartlett

    Full Text Available To evaluate the reliability and validity of 11 PROMIS measures to assess symptoms and impacts identified as important by people with rheumatoid arthritis (RA.Consecutive patients (N = 177 in an observational study completed PROMIS computer adapted tests (CATs and a short form (SF assessing pain, fatigue, physical function, mood, sleep, and participation. We assessed test-test reliability and internal consistency using correlation and Cronbach's alpha. We assessed convergent validity by examining Pearson correlations between PROMIS measures and existing measures of similar domains and known groups validity by comparing scores across disease activity levels using ANOVA.Participants were mostly female (82% and white (83% with mean (SD age of 56 (13 years; 24% had ≤ high school, 29% had RA ≤ 5 years with 13% ≤ 2 years, and 22% were disabled. PROMIS Physical Function, Pain Interference and Fatigue instruments correlated moderately to strongly (rho's ≥ 0.68 with corresponding PROs. Test-retest reliability ranged from .725-.883, and Cronbach's alpha from .906-.991. A dose-response relationship with disease activity was evident in Physical Function with similar trends in other scales except Anger.These data provide preliminary evidence of reliability and construct validity of PROMIS CATs to assess RA symptoms and impacts, and feasibility of use in clinical care. PROMIS instruments captured the experiences of RA patients across the broad continuum of RA symptoms and function, especially at low disease activity levels. Future research is needed to evaluate performance in relevant subgroups, assess responsiveness and identify clinically meaningful changes.

  9. Validation of the news computerizing renography system developed of the CEADEN in order to improve the renography system existing at the National Nephrology Institute

    International Nuclear Information System (INIS)

    Medina Martin, D.; Rodriguez Gonzalez, F.; Arista Romeu, E.; Diaz Barreto, M.; Fraxedas Mayor, R.

    1999-01-01

    The isotopic renography is a technique that permits the evaluation of renal and the urinary tract diseases. In our country is not possible performs these studies only using gamma cameras due to the high costs of this technique, so the renography results an important method for this. It was developed a computerizing renography system in order to improve the renography system existing at the National Nephrology Institute (INEF), which is the head institute in this field in Cuba. The computerizing renography system includes a detection system, an interface card and software. As detection system was using the existing at the Institute. Specialists of the CEADEN using the high experience of the INEF and the international standards developed the card and software. The new software has several advantages with respect to the ancient, as example: normalized and standardizing control and processing protocols, a higher number of studies, the conduction and parameters validation of the studies, help system included, a database with the study results, teaching possibilities, etc. The validation of the news card and software was carried out simultaneously with the old system during 1 year approximately. This permitted to compare the main parameters and results in both systems. The results obtained were analyzed using statistical programs. As conclusion we obtained that both systems have a high correlation, so it is possible to substitute the old system with a more powerful and integral renography system

  10. The web-buffet--development and validation of an online tool to measure food choice.

    Science.gov (United States)

    Bucher, Tamara; Keller, Carmen

    2015-08-01

    To date, no data exist on the agreement of food choice measured using an online tool with subsequent actual consumption. This needs to be shown before food choice, measured by means of an online tool, is used as a dependent variable to examine intake in the general population. A 'web-buffet' was developed to assess food choice. Choice was measured as planned meal composition from photographic material; respondents chose preferred foods and proportions for a main meal (out of a possible 144 combinations) online and the validity was assessed by comparison of a meal composed from a web-buffet with actual food intake 24-48 h later. Furthermore, correlations of food preferences, energy needs and health interest with meals chosen from the web-buffet were analysed. Students: n 106 (Study I), n 32 (Study II). Meals chosen from the web-buffet (mean = 2998 kJ, SD = 471 kJ) agreed with actual consumption (rs = 0.63, P choice in the web-buffet agrees sufficiently well with actual intake to measure food choice as a dependent variable in online surveys. However, we found an average underestimation of subsequent consumption. High correlations of preferences with chosen amounts and an inverse association of health interest with total energy further indicate the validity of the tool. Applications in behavioural nutrition research are discussed.

  11. Validation of the Neuro-QoL measurement system in children with epilepsy.

    Science.gov (United States)

    Lai, Jin-Shei; Nowinski, Cindy J; Zelko, Frank; Wortman, Katy; Burns, James; Nordli, Douglas R; Cella, David

    2015-05-01

    Children with epilepsy often face complex psychosocial consequences that are not fully captured by existing patient-reported outcome (PRO) measures. The Neurology Quality of Life Measurement System "Neuro-QoL" was developed to provide a set of common PRO measures that address issues important to people with neurologic disorders. This paper reports Neuro-QoL (anxiety, depression, interaction with peers, fatigue, pain, cognitive function, stigma, and upper and lower extremity functions) validation in children with epilepsy. Patients (aged 10-18years) diagnosed with epilepsy completed Neuro-QoL and legacy measures at time 1 (initial study visit) and 6-month follow-up. Internal consistency reliability was also evaluated. Concurrent validity was assessed by comparing Neuro-QoL measures with more established "legacy" measures of the same concepts. Clinical validity was evaluated by comparing mean Neuro-QoL scores of patients grouped by clinical anchors such as disease severity. Responsiveness of the Neuro-QoL from time 1 (initial study visit) to 6months was evaluated using self-reported change as the primary anchor. Sixty-one patients (mean age=13.4years; 62.3% male, 75.9% white) participated. Most patients (64.2%) had been seizure-free in the 3months prior to participation, and seizure frequency was otherwise described as follows: 17.8% daily, 13.3% weekly, 35.6% monthly, and 33.3% yearly. All patients were taking antiepileptic drugs. Patients reported better function/less symptoms compared to the reference groups. Internal consistency (alpha) coefficients ranged from 0.76 to 0.87. Patients with different seizure frequencies differed on anxiety (pNeuro-QoL measures were significantly correlated with other measures assessing similar domains. Stigma was related to self-reported change in several areas of functioning but in sometimes unexpected directions. The Neurology Quality of Life Measurement System is a valid and reliable assessment tool for children with epilepsy

  12. Validating a tool to measure auxiliary nurse midwife and nurse motivation in rural Nepal.

    Science.gov (United States)

    Morrison, Joanna; Batura, Neha; Thapa, Rita; Basnyat, Regina; Skordis-Worrall, Jolene

    2015-05-12

    A global shortage of health workers in rural areas increases the salience of motivating and supporting existing health workers. Understandings of motivation may vary in different settings, and it is important to use measurement methods that are contextually appropriate. We identified a measurement tool, previously used in Kenya, and explored its validity and reliability to measure the motivation of auxiliary nurse midwives (ANM) and staff nurses (SN) in rural Nepal. Qualitative and quantitative methods were used to assess the content validity, the construct validity, the internal consistency and the reliability of the tool. We translated the tool into Nepali and it was administered to 137 ANMs and SNs in three districts. We collected qualitative data from 78 nursing personnel and district- and central-level stakeholders using interviews and focus group discussions. We calculated motivation scores for ANMs and SNs using the quantitative data and conducted statistical tests for validity and reliability. Motivation scores were compared with qualitative data. Descriptive exploratory analysis compared mean motivation scores by ANM and SN sociodemographic characteristics. The concept of self-efficacy was added to the tool before data collection. Motivation was revealed through conscientiousness. Teamwork and the exertion of extra effort were not adequately captured by the tool, but important in illustrating motivation. The statement on punctuality was problematic in quantitative analysis, and attendance was more expressive of motivation. The calculated motivation scores usually reflected ANM and SN interview data, with some variation in other stakeholder responses. The tool scored within acceptable limits in validity and reliability testing and was able to distinguish motivation of nursing personnel with different sociodemographic characteristics. We found that with minor modifications, the tool provided valid and internally consistent measures of motivation among ANMs

  13. Measuring Workplace Travel Behaviour: Validity and Reliability of Survey Questions

    Directory of Open Access Journals (Sweden)

    Nicholas A. Petrunoff

    2013-01-01

    Full Text Available Background. The purpose of this study was to assess the (previously untested reliability and validity of survey questions commonly used to assess travel mode and travel time. Methods. Sixty-five respondents from a staff survey of travel behaviour conducted in a south-western Sydney hospital agreed to complete a travel diary for a week, wear an accelerometer over the same period, and twice complete an online travel survey an average of 21 days apart. The agreement in travel modes between the self-reported online survey and travel diary was examined with the kappa statistic. Spearman’s correlation coefficient was used to examine agreement of travel time from home to workplace measured between the self-reported online survey and four-day travel diary. Moderate-to-vigorous physical activity (MVPA time of active and nonactive travellers was compared by t-test. Results. There was substantial agreement between travel modes (K=0.62, P<0.0001 and a moderate correlation for travel time (ρ=0.75, P<0.0001 reported in the travel diary and online survey. There was a high level of agreement for travel mode (K=0.82, P<0.0001 and travel time (ρ=0.83, P<0.0001 between the two travel surveys. Accelerometer data indicated that for active travellers, 16% of the journey-to-work time is MVPA, compared with 6% for car drivers. Active travellers were significantly more active across the whole workday. Conclusions. The survey question “How did you travel to work this week? If you used more than one transport mode specify the one you used for the longest (distance portion of your journey” is reliable over 21 days and agrees well with a travel diary.

  14. Patient Experiences with the Preoperative Assessment Clinic (PEPAC): validation of an instrument to measure patient experiences

    NARCIS (Netherlands)

    Edward, G. M.; Lemaire, L. C.; Preckel, B.; Oort, F. J.; Bucx, M. J. L.; Hollmann, M. W.; de Haes, J. C. J. M.

    2007-01-01

    Background. Presently, no comprehensive and validated questionnaire to measure patient experiences of the preoperative assessment clinic (PAC) is available. We developed and validated the Patient Experiences with the Preoperative Assessment Clinic (PEPAC) questionnaire, which can be used for

  15. Necessary conditions of existence for an elliptic equation with source term and measure data involving p-Laplacian

    Directory of Open Access Journals (Sweden)

    Marie-Francoise Bidaut-Veron

    2002-10-01

    Full Text Available We study the nonnegative solutions to equation $$ -Delta_{p}u=u^{q}+lambdau, $$ in a bounded domain $Omega$ of $mathbb{R}^{N}$, where $1p-1$, $u$ is a nonnegative Radon measure on $Omega$, and $lambda>0$ is a parameter. We give necessary conditions on $u$ for existence, with $lambda$ small enough, in terms of capacity. We also give a priori estimates of the solutions.

  16. Sustained Implementation Support Scale: Validation of a Measure of Program Characteristics and Workplace Functioning for Sustained Program Implementation.

    Science.gov (United States)

    Hodge, Lauren M; Turner, Karen M T; Sanders, Matthew R; Filus, Ania

    2017-07-01

    An evaluation measure of enablers and inhibitors to sustained evidence-based program (EBP) implementation may provide a useful tool to enhance organizations' capacity. This paper outlines preliminary validation of such a measure. An expert informant and consumer feedback approach was used to tailor constructs from two existing measures assessing key domains associated with sustained implementation. Validity and reliability were evaluated for an inventory composed of five subscales: Program benefits, Program burden, Workplace support, Workplace cohesion, and Leadership style. Exploratory and confirmatory factor analysis with a sample of 593 Triple P-Positive Parenting Program-practitioners led to a 28-item scale with good reliability and good convergent, discriminant, and predictive validity. Practitioners sustaining implementation at least 3 years post-training were more likely to have supervision/peer support, reported higher levels of program benefit, workplace support, and positive leadership style, and lower program burden compared to practitioners who were non-sustainers.

  17. Testing and evaluation of existing techniques for identifying uptakes and measuring retention of uranium in mill workers

    International Nuclear Information System (INIS)

    1983-03-01

    Preliminary tests and evaluations of existing bio-analytical techniques for identifying uptakes and measuring retention of uranium in mill workers were made at two uranium mills. Urinalysis tests were found to be more reliable indicators of uranium uptakes than personal air sampling. Static air samples were not found to be good indicators of personal uptakes. In vivo measurements of uranium in lung were successfully carried out in the presence of high and fluctuating background radiation. Interference from external contamination was common during end of shift measurements. A full scale study to evaluate model parameters for the uptake, retention and elimination of uranium should include, in addition to the above techniques, particle size determination of airborne uranium, solubility in simulated lung fluid, uranium analysis in faeces and bone and minute volume measurements for each subject

  18. Quantifying frontal plane knee motion during single limb squats: reliability and validity of 2-dimensional measures.

    Science.gov (United States)

    Gwynne, Craig R; Curran, Sarah A

    2014-12-01

    Clinical assessment of lower limb kinematics during dynamic tasks may identify individuals who demonstrate abnormal movement patterns that may lead to etiology of exacerbation of knee conditions such as patellofemoral joint (PFJt) pain. The purpose of this study was to determine the reliability, validity and associated measurement error of a clinically appropriate two-dimensional (2-D) procedure of quantifying frontal plane knee alignment during single limb squats. Nine female and nine male recreationally active subjects with no history of PFJt pain had frontal plane limb alignment assessed using three-dimensional (3-D) motion analysis and digital video cameras (2-D analysis) while performing single limb squats. The association between 2-D and 3-D measures was quantified using Pearson's product correlation coefficients. Intraclass correlation coefficients (ICCs) were determined for within- and between-session reliability of 2-D data and standard error of measurement (SEM) was used to establish measurement error. Frontal plane limb alignment assessed with 2-D analysis demonstrated good correlation compared with 3-D methods (r = 0.64 to 0.78, p < 0.001). Within-session (0.86) and between-session ICCs (0.74) demonstrated good reliability for 2-D measures and SEM scores ranged from 2° to 4°. 2-D measures have good consistency and may provide a valid measure of lower limb alignment when compared to existing 3-D methods. Assessment of lower limb kinematics using 2-D methods may be an accurate and clinically useful alternative to 3-D motion analysis when identifying individuals who demonstrate abnormal movement patterns associated with PFJt pain. 2b.

  19. Improving the Validity of Quantitative Measures in Applied Linguistics Research

    Science.gov (United States)

    Purpura, James E.; Brown, James Dean; Schoonen, Rob

    2015-01-01

    In empirical applied linguistics research it is essential that the key variables are operationalized in a valid and reliable way, and that the scores are treated appropriately, allowing for a proper testing of the hypotheses under investigation. The current article addresses several theoretical and practical issues regarding the use of measurement…

  20. Improving the validity of quantitative measures in applied linguistics research

    NARCIS (Netherlands)

    Purpura, J.E.; Brown, J.D.; Schoonen, R.

    2015-01-01

    In empirical applied linguistics research it is essential that the key variables are operationalized in a valid and reliable way, and that the scores are treated appropriately, allowing for a proper testing of the hypotheses under investigation. The current article addresses several theoretical and

  1. Geostatistical validation and cross-validation of magnetometric measurements of soil pollution with Potentially Toxic Elements in problematic areas

    Science.gov (United States)

    Fabijańczyk, Piotr; Zawadzki, Jarosław

    2016-04-01

    Field magnetometry is fast method that was previously effectively used to assess the potential soil pollution. One of the most popular devices that are used to measure the soil magnetic susceptibility on the soil surface is a MS2D Bartington. Single reading using MS2D device of soil magnetic susceptibility is low time-consuming but often characterized by considerable errors related to the instrument or environmental and lithogenic factors. In this connection, measured values of soil magnetic susceptibility have to be usually validated using more precise, but also much more expensive, chemical measurements. The goal of this study was to analyze validation methods of magnetometric measurements using chemical analyses of a concentration of elements in soil. Additionally, validation of surface measurements of soil magnetic susceptibility was performed using selected parameters of a distribution of magnetic susceptibility in a soil profile. Validation was performed using selected geostatistical measures of cross-correlation. The geostatistical approach was compared with validation performed using the classic statistics. Measurements were performed at selected areas located in the Upper Silesian Industrial Area in Poland, and in the selected parts of Norway. In these areas soil magnetic susceptibility was measured on the soil surface using a MS2D Bartington device and in the soil profile using MS2C Bartington device. Additionally, soil samples were taken in order to perform chemical measurements. Acknowledgment The research leading to these results has received funding from the Polish-Norwegian Research Programme operated by the National Centre for Research and Development under the Norwegian Financial Mechanism 2009-2014 in the frame of Project IMPACT - Contract No Pol-Nor/199338/45/2013.

  2. An Instrument to Measure Maturity of Integrated Care: A First Validation Study

    Directory of Open Access Journals (Sweden)

    Liset Grooten

    2018-01-01

    Full Text Available Introduction: Lessons captured from interviews with 12 European regions are represented in a new instrument, the B3-Maturity Model (B3-MM. B3-MM aims to assess maturity along 12 dimensions reflecting the various aspects that need to be managed in order to deliver integrated care. The objective of the study was to test the content validity of B3-MM as part of SCIROCCO (Scaling Integrated Care into Context, a European Union funded project. Methods: A literature review was conducted to compare B3-MM’s 12 dimensions and their measurement scales with existing measures and instruments that focus on assessing the development of integrated care. Subsequently, a three-round survey conducted through a Delphi study with international experts in the field of integrated care was performed to test the relevance of: 1 the dimensions, 2 the maturity indicators and 3 the assessment scale used in B3-MM. Results: The 11 articles included in the literature review confirmed all the dimensions described in the original version of B3-MM. The Delphi study rounds resulted in various phrasing amendments of indicators and assessment scale. Full agreement among the experts on the relevance of the 12 B3-MM dimensions, their indicators, and assessment scale was reached after the third Delphi round. Conclusion and discussion: The B3-MM dimensions, maturity indicators and assessment scale showed satisfactory content validity. While the B3-MM is a unique instrument based on existing knowledge and experiences of regions in integrated care, further testing is needed to explore other measurement properties of B3-MM.

  3. An Instrument to Measure Maturity of Integrated Care: A First Validation Study

    Science.gov (United States)

    2018-01-01

    Introduction: Lessons captured from interviews with 12 European regions are represented in a new instrument, the B3-Maturity Model (B3-MM). B3-MM aims to assess maturity along 12 dimensions reflecting the various aspects that need to be managed in order to deliver integrated care. The objective of the study was to test the content validity of B3-MM as part of SCIROCCO (Scaling Integrated Care into Context), a European Union funded project. Methods: A literature review was conducted to compare B3-MM’s 12 dimensions and their measurement scales with existing measures and instruments that focus on assessing the development of integrated care. Subsequently, a three-round survey conducted through a Delphi study with international experts in the field of integrated care was performed to test the relevance of: 1) the dimensions, 2) the maturity indicators and 3) the assessment scale used in B3-MM. Results: The 11 articles included in the literature review confirmed all the dimensions described in the original version of B3-MM. The Delphi study rounds resulted in various phrasing amendments of indicators and assessment scale. Full agreement among the experts on the relevance of the 12 B3-MM dimensions, their indicators, and assessment scale was reached after the third Delphi round. Conclusion and discussion: The B3-MM dimensions, maturity indicators and assessment scale showed satisfactory content validity. While the B3-MM is a unique instrument based on existing knowledge and experiences of regions in integrated care, further testing is needed to explore other measurement properties of B3-MM. PMID:29588644

  4. Validating Future Force Performance Measures (Army Class): End of Training Longitudinal Validation

    Science.gov (United States)

    2009-09-01

    Caramagno, John Fisher, Patricia Keenan, Julisara Mathew, Alicia Sawyer, Jim Takitch, Shonna Waters, and Elise Weaver Drasgow Consulting Group...promise for enhancing the classification of entry-level Soldiers (Ingerick, Diaz , & Putka, 2009). In Year 2 (2007), the emphasis of the Army...Social Sciences. Ingerick, M., Diaz , T., & Putka, D. (2009). Investigations into Army enlisted classification systems: Concurrent validation report

  5. Development of a multi-institutional cohort to facilitate cardiovascular disease biomarker validation using existing biorepository samples linked to electronic health records.

    Science.gov (United States)

    Cross, Deanna S; McCarty, Catherine A; Steinhubl, Steven R; Carey, David J; Erlich, Porat M

    2013-08-01

    Emerging biomarkers for acute myocardial infarction (AMI) may enhance conventional risk-prediction algorithms if they are informative and associated with risk independently of established predictors. In this study, we constructed a cohort for testing emerging biomarkers for AMI in managed-care populations using existing biospecimen repositories linked to electronic health records (EHR). Electronic health record-based biorepositories collected by healthcare systems can be federated to provide large, methodologically sound testing sets for biomarker validation. Subjects ages 40 to 80 years were selected from 2 existing population-based biospecimen repositories. Incident AMI status and covariates were ascertained from the EHR. An ad hoc model for AMI risk was parameterized and validated. Simulation was used to test incremental gains in performance due to the inclusion of biomarkers in this model. Gains in performance were assessed in terms of area under the receiver operating characteristic curve (ROC-AUC) and case reclassification. A total of 18 329 individuals (57% female) contributed 108 400 person-years of EHR follow-up. The crude AMI incidence was 10.8 and 5.0 per 1000 person-years among males and females, respectively. Compared with the model with risk factors alone, inclusion of a simulated biomarker yielded substantial gains in sensitivity without loss of specificity. Furthermore, a net ROC-AUC gain of 13.3% was observed, as well as correct reclassification of 9.8% of incident cases (79 of 806) that were otherwise not considered statin-indicated at baseline under the National Cholesterol Education Program Adult Treatment Panel III criteria. More research is needed to assess incremental contribution of emerging biomarkers for AMI prediction in managed-care populations. © 2013 Wiley Periodicals, Inc.

  6. Validity evidence for the situational judgment test paradigm in emotional intelligence measurement.

    Science.gov (United States)

    Libbrecht, Nele; Lievens, Filip

    2012-01-01

    To date, various measurement approaches have been proposed to assess emotional intelligence (EI). Recently, two new EI tests have been developed based on the situational judgment test (SJT) paradigm: the Situational Test of Emotional Understanding (STEU) and the Situational Test of Emotion Management (STEM). Initial attempts have been made to examine the construct-related validity of these new tests; we extend these findings by placing the tests in a broad nomological network. To this end, 850 undergraduate students completed a personality inventory, a cognitive ability test, a self-report EI test, a performance-based EI measure, the STEU, and the STEM. The SJT-based EI tests were not strongly correlated with personality and fluid cognitive ability. Regarding their relation with existing EI measures, the tests did not capture the same construct as self-report EI measures, but corresponded rather to performance-based EI measures. Overall, these results lend support for the SJT paradigm for measuring EI as an ability.

  7. Validation of an instrument to measure students' motivation and self-regulation towards technology learning

    Science.gov (United States)

    Liou, Pey-Yan; Kuo, Pei-Jung

    2014-05-01

    Background:Few studies have examined students' attitudinal perceptions of technology. There is no appropriate instrument to measure senior high school students' motivation and self-regulation toward technology learning among the current existing instruments in the field of technology education. Purpose:The present study is to validate an instrument for assessing senior high school students' motivation and self-regulation towards technology learning. Sample:A total of 1822 Taiwanese senior high school students (1020 males and 802 females) responded to the newly developed instrument. Design and method:The Motivation and Self-regulation towards Technology Learning (MSRTL) instrument was developed based on the previous instruments measuring students' motivation and self-regulation towards science learning. Exploratory and confirmatory factor analyses were utilized to investigate the structure of the items. Cronbach's alpha was applied for measuring the internal consistency of each scale. Furthermore, multivariate analysis of variance was used to examine gender differences. Results:Seven scales, including 'Technology learning self-efficacy,' 'Technology learning value,' 'Technology active learning strategies,' 'Technology learning environment stimulation,' 'Technology learning goal-orientation,' 'Technology learning self-regulation-triggering,' and 'Technology learning self-regulation-implementing' were confirmed for the MSRTL instrument. Moreover, the results also showed that male and female students did not present the same degree of preference in all of the scales. Conclusions:The MSRTL instrument composed of seven scales corresponding to 39 items was shown to be valid based on validity and reliability analyses. While male students tended to express more positive and active performance in the motivation scales, no gender differences were found in the self-regulation scales.

  8. GPM GROUND VALIDATION ENVIRONMENT CANADA (EC) MANUAL PRECIPITATION MEASUREMENTS GCPEX V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The GPM Ground Validation Environment Canada (EC) Manual Precipitation Measurements GCPEx dataset was collected during the GPM Cold-season Precipitation Experiment...

  9. Concurrent Validation of Experimental Army Enlisted Personnel Selection and Classification Measures

    National Research Council Canada - National Science Library

    Knapp, Deirdre J; Tremble, Trueman R

    2007-01-01

    .... This report documents the method and results of the criterion-related validation. The predictor set includes measures of cognitive ability, temperament, psychomotor skills, values, expectations...

  10. The GAMMA® nursing measure: Its calibration for construct validity ...

    African Journals Online (AJOL)

    Purpose: To subject the GAMMA nursing measure to the Rasch Measurement Model and to report if the measure can function as an interval scale to provide metric measurements of patients' ability to perform instrumental activities of daily living. Method: A quantitative design was followed whereby GAMMA raw scores were ...

  11. The creation and validation of an instrument to measure school STEM Culture

    Science.gov (United States)

    White, Christopher

    Although current research exists on school culture, there is a gap in the literature on specialized aspects of culture such as STEM Culture defined as the beliefs, values, practices, resources, and challenges in STEM fields (Science, Technology, Engineering and Mathematics) within a school. The objective of this study was to create a valid and reliable instrument, the STEM Culture Assessment Tool (STEM-CAT), that measures this cultural aspect based on a survey of stakeholder groups within the school community and use empirical data to support the use of this instrument to measure STEM Culture. Items were created and face validity was determined through a focus group and expert review before a pilot study was conducted to determine reliability of the items. Once items were determined reliable, the survey was given to eight high schools and results were correlated to the percentage of seniors who self-reported whether they intend to pursue STEM fields upon graduation. The results of this study indicate further need for research to determine how the STEM-CAT correlates to STEM culture due to some inconsistencies with the dependent variable in this study. Future research could be done correlating the results of the STEM-CAT with participation in Advanced Placement science and mathematics, SAT/ACT scores in science and mathematics or the number of students who actually pursue STEM fields rather than a prediction halfway through the 12th grade.

  12. Development and validation of a multidimensional measure of lean manufacturing

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2010-02-01

    Full Text Available In the last 30 years of research of lean manufacturing many different questionnaires was proposed to check the degree of the use of the concept. The set of the items used changed considerably from one investigation to another one. Until now isn’t appreciate a movement that converge towards the use, by the investigators, of a few instruments whose validity and reliability have been compared in different surroundings. In fact, the majority of investigations are based on ad-hoc questionnaires and a few of them present the questionnaire validation checking only the unidimensionality and -Cronbach. Nevertheless it seems to have a consensus in identifying 5 big constructs that compose the lean manufacturing (TQM, JIT, TPM, supply chain management and high-involvement. Our research has consisted of identifying and summarizing the models that have been published previously to add the items in constructs or sub-scales of constructs. Later we developed an integrating questionnaire, starting off of the items that appeared in previous investigations. Finally we realized the sub-scales and models validation through a confirmatory factorial analysis, using date of a sample of Spanish Sheltered Work Centre’s (N=128. Of all proposed models, the best an adjustment takes place with the first order model with 20 sub-scales. Our investigation contributes to an integrating vision of the published models and the lean manufacturing sub-scales validity and reliability verification raised by other investigators. Due to his confirming approach, it can serve as generalization of studies that had been realized in contexts with different samples to which we have used for the replication.

  13. Measuring comprehensive outcomes in palliative care: validation of the Korean version of the Good Death Inventory.

    Science.gov (United States)

    Shin, Dong Wook; Choi, JiEun; Miyashita, Mitsunori; Choi, Jin Young; Kang, Jina; Baik, Young Ji; Mo, Ha Na; Choi, Jong Soon; Son, Young Sun; Lee, Hae Sook

    2011-10-01

    No systematic or comprehensive attempts have yet been made to assess quality of death as an indicator of palliative care outcomes in Korea, and no validated instruments exist for the assessment of a good death in Koreans. This study examined the validity and reliability of the Korean version of the Good Death Inventory (GDI), which was developed in Japan to evaluate the quality of death from the perspective of bereaved family members. Forward and backward translations and a pilot test were conducted. In a multicenter cross-sectional survey, a questionnaire packet, including the GDI, overall quality of life during the last week, and overall satisfaction with care, was mailed to bereaved family members (n=501) of patients who had died from cancer two to six months before the study. Descriptive analyses were performed, including response rate, mean, median, skewness, and kurtosis for each item. The reliability of the GDI was tested by Cronbach's alpha. The dimensional structure was assessed using confirmatory factor analyses. Concurrent validity was tested by correlation with the overall quality of life and overall satisfaction with care. Participants were able to complete the GDI, and the compliance rates were satisfactory. Cronbach's alpha coefficient for internal consistency was 0.93 overall and ranged from 0.69 to 0.94 for subdomains. The hypothesized 18-factor model of a good death appeared to fit the data (goodness of fit index [GFI]=0.964; adjusted GFI index=0.960; normal fit index=0.952). The overall scores on the GDI correlated with patients' quality of life (0.56; P<0.001) and overall satisfaction with care (0.44; P<0.001). The Korean version of the GDI is a reliable and valid measure of the comprehensive outcomes of palliative care from the perspective of bereaved Korean family members. Copyright © 2011 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

  14. How to measure wisdom: content, reliability, and validity of five measures

    Science.gov (United States)

    Glück, Judith; König, Susanne; Naschenweng, Katja; Redzanowski, Uwe; Dorner, Lara; Straßer, Irene; Wiedermann, Wolfgang

    2013-01-01

    Wisdom is a field of growing interest both inside and outside academic psychology, and researchers are increasingly interested in using measures of wisdom in their work. However, wisdom is a highly complex construct, and its various operationalizations are based on quite different definitions. Which measure a researcher chooses for a particular research project may have a strong influence on the results. This study compares four well-established measures of wisdom—the Self-Assessed Wisdom Scale (Webster, 2003, 2007), the Three-Dimensional Wisdom Scale (Ardelt, 2003), the Adult Self-Transcendence Inventory (Levenson et al., 2005), and the Berlin Wisdom Paradigm (Baltes and Smith, 1990; Baltes and Staudinger, 2000)—with respect to content, reliability, factorial structure, and construct validity (relationships to wisdom nomination, interview-based wisdom ratings, and correlates of wisdom). The sample consisted of 47 wisdom nominees and 123 control participants. While none of the measures performed “better” than the others by absolute standards, recommendations are given for researchers to select the most suitable measure for their substantive interests. In addition, a “Brief Wisdom Screening Scale” is introduced that contains those 20 items from the three self-report scales that were most highly correlated with the common factor across the scales. PMID:23874310

  15. Validation of a Measure of Normative Beliefs About Smokeless Tobacco Use.

    Science.gov (United States)

    Adkison, Sarah E; O'Connor, Richard J; Bansal-Travers, Maansi; Cummings, K Michael; Rees, Vaughan W; Hatsukami, Dorothy K

    2016-05-01

    Validated methods to evaluate consumer responses to modified risk tobacco products (MRTPs) are needed. Guided by existing literature that demonstrates a relationship between normative beliefs and future intentions to use tobacco the current research sought to (1) develop a measure of normative beliefs about smokeless tobacco (ST) and establish the underlying factor structure, (2) evaluate the structure with confirmatory factor analysis utilizing an independent sample of youth, and (3) establish the measure's concurrent validity. Respondents (smokers and nonsmokers aged 15-65; N = 2991) completed a web-based survey that included demographic characteristics, tobacco use history and dependence, and a measure of attitudes about ST adapted from the Normative Beliefs about Smoking scale. A second sample of youth (aged 14-17; N = 305) completed a similar questionnaire. Exploratory factor analysis produced the anticipated three-factor solution and accounted for nearly three-quarters of the variance in the data reflecting (1) perceived prevalence of ST use, (2) popularity of ST among successful/elite, and (3) approval of ST use by parents/peers. Confirmatory factor analysis with data from the youth sample demonstrated good model fit. Logistic regression demonstrated that the scales effectively discriminate between ST users and nonusers and are associated with interest in trying snus. Assessment of MRTPs for regulatory purposes, which allows messages of reduced risk, should include measurement of social norms. Furthermore, surveillance efforts that track use of new MRTPs should include measures of social norms to determine how norms change with prevalence of use. © The Author 2015. Published by Oxford University Press on behalf of the Society for Research on Nicotine and Tobacco. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  16. Earthquake resistant measures of existing structures by TRTA; Eidan chikatetsu ni okeru kisetsu doboku kozobutsu no taishin taisaku

    Energy Technology Data Exchange (ETDEWEB)

    Miyata, N.

    1997-08-10

    Seismic countermeasures for the existing structures are introduced on the main item: reinforcement of open-cut tunnel RC center pillars as well as on reinforcement of rigid frame viaduct pillars and installation of a device for prevention of viaduct falling. First, for reinforcing open-cut tunnel center pillars, design was devised so as to be suitable to construction environment in the subway yard. Important reinforcement materials are steel and filling materials; SS and a self-leveling material for building construction were chosen. The following construction work procedures are explained based on the actual construction: removal of interior materials of existing pillars and measurement of the actual size, high pressure water washing, steel plate fabrication, plate delivery to the yard, installation of steel plates, filler filling, painting. Next, on reinforcement of viaduct pillars on the ground, the reinforcement design concept is basically same as in the open-cut tunnel. Points of difference in design and construction are explained. On the countermeasure for prevention of viaduct falling for girder bridges without the falling prevention, countermeasure investigation and design work or installation work are being carried out. Seismic resistance evaluation and design of existing bridges, and construction work are explained. 13 figs., 1 tab.

  17. Cross-population validation of statistical distance as a measure of physiological dysregulation during aging.

    Science.gov (United States)

    Cohen, Alan A; Milot, Emmanuel; Li, Qing; Legault, Véronique; Fried, Linda P; Ferrucci, Luigi

    2014-09-01

    Measuring physiological dysregulation during aging could be a key tool both to understand underlying aging mechanisms and to predict clinical outcomes in patients. However, most existing indices are either circular or hard to interpret biologically. Recently, we showed that statistical distance of 14 common blood biomarkers (a measure of how strange an individual's biomarker profile is) was associated with age and mortality in the WHAS II data set, validating its use as a measure of physiological dysregulation. Here, we extend the analyses to other data sets (WHAS I and InCHIANTI) to assess the stability of the measure across populations. We found that the statistical criteria used to determine the original 14 biomarkers produced diverging results across populations; in other words, had we started with a different data set, we would have chosen a different set of markers. Nonetheless, the same 14 markers (or the subset of 12 available for InCHIANTI) produced highly similar predictions of age and mortality. We include analyses of all combinatorial subsets of the markers and show that results do not depend much on biomarker choice or data set, but that more markers produce a stronger signal. We conclude that statistical distance as a measure of physiological dysregulation is stable across populations in Europe and North America. Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Working with Error and Uncertainty to Increase Measurement Validity

    Science.gov (United States)

    Amrein-Beardsley, Audrey; Barnett, Joshua H.

    2012-01-01

    Over the previous two decades, the era of accountability has amplified efforts to measure educational effectiveness more than Edward Thorndike, the father of educational measurement, likely would have imagined. Expressly, the measurement structure for evaluating educational effectiveness continues to rely increasingly on one sole…

  19. Are we really measuring what we say we're measuring? Using video techniques to supplement traditional construct validation procedures.

    Science.gov (United States)

    Podsakoff, Nathan P; Podsakoff, Philip M; Mackenzie, Scott B; Klinger, Ryan L

    2013-01-01

    Several researchers have persuasively argued that the most important evidence to consider when assessing construct validity is whether variations in the construct of interest cause corresponding variations in the measures of the focal construct. Unfortunately, the literature provides little practical guidance on how researchers can go about testing this. Therefore, the purpose of this article is to describe how researchers can use video techniques to test whether their scales measure what they purport to measure. First, we discuss how researchers can develop valid manipulations of the focal construct that they hope to measure. Next, we explain how to design a study to use this manipulation to test the validity of the scale. Finally, comparing and contrasting traditional and contemporary perspectives on validation, we discuss the advantages and limitations of video-based validation procedures. PsycINFO Database Record (c) 2013 APA, all rights reserved.

  20. Validation of OMI UV measurements against ground-based measurements at a station in Kampala, Uganda

    Science.gov (United States)

    Muyimbwa, Dennis; Dahlback, Arne; Stamnes, Jakob; Hamre, Børge; Frette, Øyvind; Ssenyonga, Taddeo; Chen, Yi-Chun

    2015-04-01

    We present solar ultraviolet (UV) irradiance data measured with a NILU-UV instrument at a ground site in Kampala (0.31°N, 32.58°E), Uganda for the period 2005-2014. The data were analyzed and compared with UV irradiances inferred from the Ozone Monitoring Instrument (OMI) for the same period. Kampala is located on the shores of lake Victoria, Africa's largest fresh water lake, which may influence the climate and weather conditions of the region. Also, there is an excessive use of worn cars, which may contribute to a high anthropogenic loading of absorbing aerosols. The OMI surface UV algorithm does not account for absorbing aerosols, which may lead to systematic overestimation of surface UV irradiances inferred from OMI satellite data. We retrieved UV index values from OMI UV irradiances and validated them against the ground-based UV index values obtained from NILU-UV measurements. The UV index values were found to follow a seasonal pattern similar to that of the clouds and the rainfall. OMI inferred UV index values were overestimated with a mean bias of about 28% under all-sky conditions, but the mean bias was reduced to about 8% under clear-sky conditions when only days with radiation modification factor (RMF) greater than 65% were considered. However, when days with RMF greater than 70, 75, and 80% were considered, OMI inferred UV index values were found to agree with the ground-based UV index values to within 5, 3, and 1%, respectively. In the validation we identified clouds/aerosols, which were present in 88% of the measurements, as the main cause of OMI inferred overestimation of the UV index.

  1. Rasch Validation of a Measure of Reform-Oriented Science Teaching Practices

    Science.gov (United States)

    You, Hye Sun

    2016-06-01

    Growing evidence from recent curriculum documents and previous research suggests that reform-oriented science teaching practices promote students' conceptual understanding, levels of achievement, and motivation to learn, especially when students are actively engaged in constructing their ideas through scientific inquiries. However, it is difficult to identify to what extent science teachers engage students in reform-oriented teaching practices (RTPs) in their science classrooms. In order to exactly diagnose the current status of science teachers' implementation of the RTPs, a valid and reliable instrument tool is needed. The principles of validity and reliability are fundamental cornerstones in developing a robust measurement tool. As such, this study was motivated by the desire to point out the limitations of the existing statistical and psychometric analyses and to further examine the validation of the RTP survey instrument. This paper thus aims at calibrating the items of the RTPs for science teachers using the Rasch model. The survey instrument scale was adapted from the 2012 National Survey of Science and Mathematics Education (NSSME) data. A total of 3701 science teachers from 1403 schools from across the USA participated in the NSSME survey. After calibrating the RTP items and persons on the same scale, the RTP instrument well represented the population of US science teachers. Model-data fit determined by Infit and Outfit statistics was within an appropriate range (0.5-1.5), supporting the unidimensional structure of the RTPs. The ordered category thresholds and the probability of the thresholds showed that the five-point rating scale functioned well. The results of this study support the use of the RTP measure from the 2012 NSSME in assessing usage of RTPs.

  2. Validation of theoretical models through measured pavement response

    DEFF Research Database (Denmark)

    Ullidtz, Per

    1999-01-01

    mechanics was quite different from the measured stress, the peak theoretical value being only half of the measured value.On an instrumented pavement structure in the Danish Road Testing Machine, deflections were measured at the surface of the pavement under FWD loading. Different analytical models were...... then used to derive the elastic parameters of the pavement layeres, that would produce deflections matching the measured deflections. Stresses and strains were then calculated at the position of the gauges and compared to the measured values. It was found that all analytical models would predict the tensile...

  3. Complete study of the existence and uniqueness of solutions for semilinear elliptic equations involving measures concentrated on boundary

    KAUST Repository

    Chen, Huyuan

    2017-02-06

    The purpose of this paper is to study the weak solutions of the fractional elliptic problem(Formula presented.) where (Formula presented.), (Formula presented.) or (Formula presented.), (Formula presented.) with (Formula presented.) is the fractional Laplacian defined in the principle value sense, (Formula presented.) is a bounded (Formula presented.) open set in (Formula presented.) with (Formula presented.), (Formula presented.) is a bounded Radon measure supported in (Formula presented.) and (Formula presented.) is defined in the distribution sense, i.e.(Formula presented.) here (Formula presented.) denotes the unit inward normal vector at (Formula presented.). In this paper, we prove that (0.1) with (Formula presented.) admits a unique weak solution when g is a continuous nondecreasing function satisfying(Formula presented.) Our interest then is to analyse the properties of weak solution when (Formula presented.) with (Formula presented.), including the asymptotic behaviour near (Formula presented.) and the limit of weak solutions as (Formula presented.). Furthermore, we show the optimality of the critical value (Formula presented.) in a certain sense, by proving the non-existence of weak solutions when (Formula presented.). The final part of this article is devoted to the study of existence for positive weak solutions to (0.1) when (Formula presented.) and (Formula presented.) is a bounded nonnegative Radon measure supported in (Formula presented.). We employ the Schauder’s fixed point theorem to obtain positive solution under the hypothesis that g is a continuous function satisfying(Formula presented.)-pagination

  4. Measuring Prosocial Tendencies in Germany: Sources of Validity and Reliablity of the Revised Prosocial Tendency Measure

    Science.gov (United States)

    Rodrigues, Johannes; Ulrich, Natalie; Mussel, Patrick; Carlo, Gustavo; Hewig, Johannes

    2017-01-01

    The prosocial tendencies measure (PTM; Carlo and Randall, 2002) is a widely used measurement for prosocial tendencies in English speaking participants. This instrument distinguishes between six different types of prosocial tendencies that partly share some common basis, but also can be opposed to each other. To examine these constructs in Germany, a study with 1067 participants was conducted. The study investigated the structure of this German version of the PTM-R via exploratory factor analysis, confirmatory factor analysis, correlations with similar constructs in subsamples as well as via measurement invariance test concerning the original English version. The German translation showed a similar factor structure to the English version in exploratory factor analysis and in confirmatory factor analysis. Measurement invariance was found between the English and German language versions of the PTM and support for the proposed six-factor structure (altruistic, anonymous, compliant, dire, emotional and public prosocial behavior) was also found in confirmatory factor analysis. Furthermore, the expected interrelations of these factors of prosocial behavior tendencies were obtained. Finally, correlations of the prosocial behavior tendencies with validating constructs and behaviors were found. Thus, the findings stress the importance of seeing prosocial behavior not as a single dimension construct, but as a factored construct which now can also be assessed in German speaking participants. PMID:29270144

  5. Dual photon absorptiometry: Validation of mineral and fat measurements

    International Nuclear Information System (INIS)

    Heymsfield, S.B.; Wang, J.; Sulet, M.; Lichtman, S.; Pierson, R.N. Jr.; Kehayias, J.; Lindsay, R.

    1989-01-01

    Photons passing through human tissue undergo attenuation in relation to the specific chemical substances with which they interact. By selecting two appropriate photon energies and recording their attenuation, the investigator can solve simultaneous equations that subdivide body mass into two components: soft tissue and bone mineral ash. The aim of this paper is to describe and to validate the estimates of body composition derived by dual photon systems. The initial studies largely involved dual photon absorptiometers, although the discussion will also include the more recently developed dual energy x-ray absorptiometers. 13 refs., 7 figs., 4 tabs

  6. Validity of Willingness to Pay Measures under Preference Uncertainty.

    Science.gov (United States)

    Braun, Carola; Rehdanz, Katrin; Schmidt, Ulrich

    2016-01-01

    Recent studies in the marketing literature developed a new method for eliciting willingness to pay (WTP) with an open-ended elicitation format: the Range-WTP method. In contrast to the traditional approach of eliciting WTP as a single value (Point-WTP), Range-WTP explicitly allows for preference uncertainty in responses. The aim of this paper is to apply Range-WTP to the domain of contingent valuation and to test for its theoretical validity and robustness in comparison to the Point-WTP. Using data from two novel large-scale surveys on the perception of solar radiation management (SRM), a little-known technique for counteracting climate change, we compare the performance of both methods in the field. In addition to the theoretical validity (i.e. the degree to which WTP values are consistent with theoretical expectations), we analyse the test-retest reliability and stability of our results over time. Our evidence suggests that the Range-WTP method clearly outperforms the Point-WTP method.

  7. Validity of Willingness to Pay Measures under Preference Uncertainty.

    Directory of Open Access Journals (Sweden)

    Carola Braun

    Full Text Available Recent studies in the marketing literature developed a new method for eliciting willingness to pay (WTP with an open-ended elicitation format: the Range-WTP method. In contrast to the traditional approach of eliciting WTP as a single value (Point-WTP, Range-WTP explicitly allows for preference uncertainty in responses. The aim of this paper is to apply Range-WTP to the domain of contingent valuation and to test for its theoretical validity and robustness in comparison to the Point-WTP. Using data from two novel large-scale surveys on the perception of solar radiation management (SRM, a little-known technique for counteracting climate change, we compare the performance of both methods in the field. In addition to the theoretical validity (i.e. the degree to which WTP values are consistent with theoretical expectations, we analyse the test-retest reliability and stability of our results over time. Our evidence suggests that the Range-WTP method clearly outperforms the Point-WTP method.

  8. Creating and validating GIS measures of urban design for health research.

    Science.gov (United States)

    Purciel, Marnie; Neckerman, Kathryn M; Lovasi, Gina S; Quinn, James W; Weiss, Christopher; Bader, Michael D M; Ewing, Reid; Rundle, Andrew

    2009-12-01

    Studies relating urban design to health have been impeded by the unfeasibility of conducting field observations across large areas and the lack of validated objective measures of urban design. This study describes measures for five dimensions of urban design - imageability, enclosure, human scale, transparency, and complexity - created using public geographic information systems (GIS) data from the US Census and city and state government. GIS measures were validated for a sample of 588 New York City block faces using a well-documented field observation protocol. Correlations between GIS and observed measures ranged from 0.28 to 0.89. Results show valid urban design measures can be constructed from digital sources.

  9. Accredited dose measurements for validation of radiation sterilized products

    DEFF Research Database (Denmark)

    Miller, A.

    1993-01-01

    for control of radiation sterilization. The accredited services include: 1. 1. Irradiation of dosimeters and test samples with cobalt-60 gamma rays. 2. 2. Irradiation of dosimeters and test samples with 10 MeV electrons. 3. 3. Issue of and measurement with calibrated dosimeters. 4. 4. Measurement...... of the dosimetric parameters of an irradiation facility. 5. 5. Measurement of absorbed dose distribution in irradiated products. The paper describes these services and the procedures necessary for their execution....

  10. Enhancing the Validity of a Quality of Life Measure for Autistic People

    Science.gov (United States)

    McConachie, Helen; Mason, David; Parr, Jeremy R.; Garland, Deborah; Wilson, Colin; Rodgers, Jacqui

    2018-01-01

    Accurate measurement of quality of life (QoL) is important for evaluation of autism services and trials of interventions. We undertook psychometric validation of the World Health Organisation measure--WHOQoL-BREF, examined construct validity of the WHO Disabilities module and developed nine additional autism-specific items (ASQoL) from extensive…

  11. A Framework for Mixing Methods in Quantitative Measurement Development, Validation, and Revision: A Case Study

    Science.gov (United States)

    Luyt, Russell

    2012-01-01

    A framework for quantitative measurement development, validation, and revision that incorporates both qualitative and quantitative methods is introduced. It extends and adapts Adcock and Collier's work, and thus, facilitates understanding of quantitative measurement development, validation, and revision as an integrated and cyclical set of…

  12. Validation of Portable Muscle Tone Measurement Device Based on a Motor-Driven System

    National Research Council Canada - National Science Library

    Chen, Jia-Jin

    2001-01-01

    .... The aim of this study is to extend a sophisticated motor-driven measurement system, developed in our previous research, as a validation platform for developing a portable muscle tone measurement system...

  13. Five year experience in management of perforated peptic ulcer and validation of common mortality risk prediction models - are existing models sufficient? A retrospective cohort study.

    Science.gov (United States)

    Anbalakan, K; Chua, D; Pandya, G J; Shelat, V G

    2015-02-01

    Emergency surgery for perforated peptic ulcer (PPU) is associated with significant morbidity and mortality. Accurate and early risk stratification is important. The primary aim of this study is to validate the various existing MRPMs and secondary aim is to audit our experience of managing PPU. 332 patients who underwent emergency surgery for PPU at a single intuition from January 2008 to December 2012 were studied. Clinical and operative details were collected. Four MRPMs: American Society of Anesthesiology (ASA) score, Boey's score, Mannheim peritonitis index (MPI) and Peptic ulcer perforation (PULP) score were validated. Median age was 54.7 years (range 17-109 years) with male predominance (82.5%). 61.7% presented within 24 h of onset of abdominal pain. Median length of stay was 7 days (range 2-137 days). Intra-abdominal collection, leakage, re-operation and 30-day mortality rates were 8.1%, 2.1%, 1.2% and 7.2% respectively. All the four MRPMs predicted intra-abdominal collection and mortality; however, only MPI predicted leak (p = 0.01) and re-operation (p = 0.02) rates. The area under curve for predicting mortality was 75%, 72%, 77.2% and 75% for ASA score, Boey's score, MPI and PULP score respectively. Emergency surgery for PPU has low morbidity and mortality in our experience. MPI is the only scoring system which predicts all - intra-abdominal collection, leak, reoperation and mortality. All four MRPMs had a similar and fair accuracy to predict mortality, however due to geographic and demographic diversity and inherent weaknesses of exiting MRPMs, quest for development of an ideal model should continue. Copyright © 2015 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

  14. Dual Rotating Rake Measurements of Higher-Order Duct Modes: Validation Using Experimental and Numerical Data

    Science.gov (United States)

    Dahl, Milo D.; Hixon, Duane R.; Sutliff, Daniel L.

    2018-01-01

    A rotating rake mode measurement system was designed to measure acoustic duct modes generated by a fan stage. After analysis of the measured data, the mode coefficient amplitudes and phases were quantified. Early studies using this system found that mode power levels computed from rotating rake measured data would agree with the far-field power levels. However, this agreement required that the sound from the noise sources within the duct propagated outward from the duct exit without reflection and previous studies suggested conditions could exist where significant reflections could occur. This paper shows that mounting a second rake to the rotating system, with an offset in both the axial and the azimuthal directions, measures the data necessary to determine the modes propagating in both directions within a duct. The rotating rake data analysis technique was extended to include the data measured by the second rake. The analysis resulted in a set of circumferential mode coefficients at each of the two rake microphone locations. Radial basis functions were then least-squares fit to this data to obtain the radial mode coefficients for the modes propagating in both directions within the duct while accounting for the presence of evanescent modes. The validation of the dual-rotating-rake measurements was conducted using data from a combination of experiments and numerical calculations to compute reflection coefficients and other mode coefficient ratios. Compared to results from analytical and numerical computations, the results from dual-rotating-rake measured data followed the expected trends when frequency, mode number, and duct termination geometry were changed.

  15. Toward Valid Measurement of Stephen Pepper's World Hypotheses.

    Science.gov (United States)

    Johnson, John A.

    Two measures of the "world hypotheses" of Stephen Pepper were mailed to 100 sociobiologists, 87 behaviorists, 79 personality psychologists, and 45 human developmentalists. The World Hypothesis Scale (WHS) was designed to measure Pepper's four world views: (1) formism; (2) mechanism; (3) organicism; and (4) contextualism. The…

  16. Testing and Validation of the Dynamic Interia Measurement Method

    Science.gov (United States)

    Chin, Alexander; Herrera, Claudia; Spivey, Natalie; Fladung, William; Cloutier, David

    2015-01-01

    This presentation describes the DIM method and how it measures the inertia properties of an object by analyzing the frequency response functions measured during a ground vibration test (GVT). The DIM method has been in development at the University of Cincinnati and has shown success on a variety of small scale test articles. The NASA AFRC version was modified for larger applications.

  17. The Hemingway: Measure of Adolescent Connectedness-- Validation Studies.

    Science.gov (United States)

    Karcher, Michael J.

    This investigation reports the development of a measure of adolescent connectedness and estimates of its psychometric properties. A measure was developed to assess the ecological and developmental dimensions of adolescent connectedness, defined as adolescents' caring for and involvement in specific relationships and contexts within their social…

  18. Validation of the measurement model concept for error structure identification

    International Nuclear Information System (INIS)

    Shukla, Pavan K.; Orazem, Mark E.; Crisalle, Oscar D.

    2004-01-01

    The development of different forms of measurement models for impedance has allowed examination of key assumptions on which the use of such models to assess error structure are based. The stochastic error structures obtained using the transfer-function and Voigt measurement models were identical, even when non-stationary phenomena caused some of the data to be inconsistent with the Kramers-Kronig relations. The suitability of the measurement model for assessment of consistency with the Kramers-Kronig relations, however, was found to be more sensitive to the confidence interval for the parameter estimates than to the number of parameters in the model. A tighter confidence interval was obtained for Voigt measurement model, which made the Voigt measurement model a more sensitive tool for identification of inconsistencies with the Kramers-Kronig relations

  19. Incremental Validity of the Durand Adaptive Psychopathic Traits Questionnaire Above Self-Report Psychopathy Measures in Community Samples.

    Science.gov (United States)

    Durand, Guillaume

    2018-05-03

    Although highly debated, the notion of the existence of an adaptive side to psychopathy is supported by some researchers. Currently, 2 instruments assessing psychopathic traits include an adaptive component, which might not cover the full spectrum of adaptive psychopathic traits. The Durand Adaptive Psychopathic Traits Questionnaire (DAPTQ; Durand, 2017 ) is a 41-item self-reported instrument assessing adaptive traits known to correlate with the psychopathic personality. In this study, I investigated in 2 samples (N = 263 and N = 262) the incremental validity of the DAPTQ over the Psychopathic Personality Inventory-Short Form (PPI-SF) and the Triarchic Psychopathy Measure (TriPM) using multiple criterion measures. Results showed that the DAPTQ significantly increased the predictive validity over the PPI-SF on 5 factors of the HEXACO. Additionally, the DAPTQ provided incremental validity over both the PPI-SF and the TriPM on measures of communication adaptability, perceived stress, and trait anxiety. Overall, these results support the validity of the DAPTQ in community samples. Directions for future studies to further validate the DAPTQ are discussed.

  20. Development and validation of a method for measuring depth of understanding in constructivist learning

    Science.gov (United States)

    Guarino, Lucia Falsetti

    A method for measuring depth of understanding of students in the middle-level science classroom was developed and validated. A common theme in the literature on constructivism in science education is that constructivist pedagogy, as opposed to objectivist pedagogy, results in a greater depth of understanding. Since few instruments measuring this construct exist at the present time, the development of such a tool to measure this construct was a significant contribution to the current body of assessment technologies in science education. The author's Depth of Understanding Assessment (DUA) evolved from a writing measure originally designed as a history assessment. The study involved 230 eighth grade science students studying a chemical change unit. The main research questions were: (1) What is the relationship between the DUA and each of the following independent variables: recall, application, and questioning modalities as measured by the Cognitive Preference Test; deep, surface, achieving, and deep-achieving approaches as measured by the Learning Process Questionnaire; achievement as measured by the Chemical Change Quiz, and teacher perception of student ability to conceptualize science content? (2) Is there a difference in depth of understanding, as measured by the DUA, between students who are taught by objectivist pedagogy and students who are taught by constructivist pedagogy favoring the constructivist group? (3) Is there a gender difference in depth of understanding as measured by the DUA? (4) Do students who are taught by constructivist pedagogy perceive their learning environment as more constructivist than students who are taught by objectivist pedagogy? Six out of nine hypothesis tests supported the validity of the DUA. The results of the qualitative component of this study which consisted of student interviews substantiated the quantitative results by providing additional information and insights. There was a significant difference in depth of

  1. Validity of Cognitive Load Measures in Simulation-Based Training: A Systematic Review.

    Science.gov (United States)

    Naismith, Laura M; Cavalcanti, Rodrigo B

    2015-11-01

    Cognitive load theory (CLT) provides a rich framework to inform instructional design. Despite the applicability of CLT to simulation-based medical training, findings from multimedia learning have not been consistently replicated in this context. This lack of transferability may be related to issues in measuring cognitive load (CL) during simulation. The authors conducted a review of CLT studies across simulation training contexts to assess the validity evidence for different CL measures. PRISMA standards were followed. For 48 studies selected from a search of MEDLINE, EMBASE, PsycInfo, CINAHL, and ERIC databases, information was extracted about study aims, methods, validity evidence of measures, and findings. Studies were categorized on the basis of findings and prevalence of validity evidence collected, and statistical comparisons between measurement types and research domains were pursued. CL during simulation training has been measured in diverse populations including medical trainees, pilots, and university students. Most studies (71%; 34) used self-report measures; others included secondary task performance, physiological indices, and observer ratings. Correlations between CL and learning varied from positive to negative. Overall validity evidence for CL measures was low (mean score 1.55/5). Studies reporting greater validity evidence were more likely to report that high CL impaired learning. The authors found evidence that inconsistent correlations between CL and learning may be related to issues of validity in CL measures. Further research would benefit from rigorous documentation of validity and from triangulating measures of CL. This can better inform CLT instructional design for simulation-based medical training.

  2. Validation of Standing Wave Liner Impedance Measurement Method, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Hersh Acoustical Engineering, Inc. proposes to establish the feasibility and practicality of using the Standing Wave Method (SWM) to measure the impedance of...

  3. Validating an Agency-based Tool for Measuring Women's Empowerment in a Complex Public Health Trial in Rural Nepal.

    Science.gov (United States)

    Gram, Lu; Morrison, Joanna; Sharma, Neha; Shrestha, Bhim; Manandhar, Dharma; Costello, Anthony; Saville, Naomi; Skordis-Worrall, Jolene

    2017-01-02

    Despite the rising popularity of indicators of women's empowerment in global development programmes, little work has been done on the validity of existing measures of such a complex concept. We present a mixed methods validation of the use of the Relative Autonomy Index for measuring Amartya Sen's notion of agency freedom in rural Nepal. Analysis of think-aloud interviews ( n  = 7) indicated adequate respondent understanding of questionnaire items, but multiple problems of interpretation including difficulties with the four-point Likert scale, questionnaire item ambiguity and difficulties with translation. Exploratory Factor Analysis of a calibration sample ( n  = 511) suggested two positively correlated factors ( r  = 0.64) loading on internally and externally motivated behaviour. Both factors increased with decreasing education and decision-making power on large expenditures and food preparation. Confirmatory Factor Analysis on a validation sample ( n  = 509) revealed good fit (Root Mean Square Error of Approximation 0.05-0.08, Comparative Fit Index 0.91-0.99). In conclusion, we caution against uncritical use of agency-based quantification of women's empowerment. While qualitative and quantitative analysis revealed overall satisfactory construct and content validity, the positive correlation between external and internal motivations suggests the existence of adaptive preferences. High scores on internally motivated behaviour may reflect internalized oppression rather than agency freedom.

  4. EXTRAPOLATING THE SUITABILITY OF SOILS AS NATURAL REACTORS USING AN EXISTING SOIL MAP: APPLICATION OF PEDOTRANSFER FUNCTIONS, SPATIAL INTEGRATION AND VALIDATION PROCEDURES

    Directory of Open Access Journals (Sweden)

    Yameli Guadalupe Aguilar Duarte

    2011-04-01

    Full Text Available The aim of this study was the spatial identification of the suitability of soils as reactors in the treatment of swine wastewater in the Mexican state of Yucatan, as well as the development of a map with validation procedures. Pedotransfer functions were applied to the existing soils database. A methodological approach was adopted that allowed the spatialization of pedotransfer function data points. A map of the suitability of soil associations as reactors was produced, as well as a map of the level of accuracy of the associations using numerical classification technique, such as discriminant analysis. Soils with the highest suitability indices were found to be Vertisols, Stagnosols, Nitisols and Luvisols. Some 83.9% of the area of Yucatan is marginally suitable for the reception of swine wastewater, 6.5% is moderately suitable, while 6% is suitable. The percentages of the spatial accuracy of the pedotransfer functions range from 62% to 95% with an overall value of 71.5%. The methodological approach proved to be practical, accurate and inexpensive.

  5. Measuring hunger and satiety in primary school children. Validation of a new picture rating scale.

    Science.gov (United States)

    Bennett, Carmel; Blissett, Jackie

    2014-07-01

    Measuring hunger and satiety in children is essential to many studies of childhood eating behaviour. Few validated measures currently exist that allow children to make accurate and reliable ratings of hunger/satiety. Three studies aimed to validate the use of a new categorical rating scale in the context of estimated and real eating episodes. Forty-seven 6- to 8-year-olds participated in Study 1, which used a between-participant design. Results indicated that the majority of children were able to make estimated hunger/satiety ratings for a story character using the scale. No significant differences in the ratings of hunger/satiety of children measured before and after lunch were observed and likely causes are discussed. To account for inter-individual differences in hunger/satiety perceptions Study 2 employed a within-participant design. Fifty-four 5- to 7-year-olds participated and made estimated hunger/satiety ratings for a story character and real hunger/satiety ratings before and after lunch. The results indicated that the majority of children were able to use the scale to make estimated and real hunger and satiety ratings. Children were found to be significantly hungrier before compared to after lunch. As it was not possible to establish the types and quantities of food children ate for lunch a third study was carried out in a controlled laboratory environment. Thirty-six 6- to 9-year-olds participated in Study 3 and made hunger/satiety ratings before and after ingesting an ad libitum snack of known composition and quantity. Results indicated that children felt hungrier before than after the snack and that pre-snack hunger/satiety, and changes in hunger/satiety, were associated with snack intake. Overall, the studies indicate that the scale has potential for use with primary school children. Implications of the findings are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Adapting an existing visualization application for browser-based deployment: A case study from the Tropical Rainfall Measuring Mission

    Science.gov (United States)

    Kelley, Owen A.

    2013-02-01

    THOR, the Tool for High-resolution Observation Review, is a data viewer for the Tropical Rainfall Measuring Mission (TRMM) and the upcoming Global Precipitation Measurement (GPM) mission. THOR began as a desktop application, but now it can be accessed with a web browser, making THOR one of the first online tools for visualizing TRMM satellite data (http://pps.gsfc.nasa.gov/thor). In this effort, the reuse of the existing visualization code was maximized and the complexity of new code was minimized by avoiding unnecessary functionality, frameworks, or libraries. The simplicity of this approach makes it potentially attractive to researchers wishing to adapt their visualization applications for online deployment. To enable THOR to run within a web browser, three new pieces of code are written. First, the graphical user interface (GUI) of the desktop application is translated into HTML, JavaScript, and CSS. Second, a simple communication mechanism is developed over HTTP. Third, a virtual GUI is created on the server that interfaces with the image-generating routines of the existing desktop application so that these routines do not need to be modified for online use. While the basic functionality of THOR is now available online, prototyping is ongoing for enhanced 3D imaging and other aspects of both THOR Desktop and THOR Online. Because TRMM data products are complex and periodically reprocessed with improved algorithms, having a tool such as THOR is important to analysts at the Precipitation Processing System where the algorithms are tested and the products generated, stored, and distributed. Researchers also have found THOR useful for taking a first look at individual files before writing their own software to perform specialized calculations and analyses.

  7. The development and validation of a job crafting measure for use with blue-collar workers

    DEFF Research Database (Denmark)

    Nielsen, Karina; Abildgaard, Johan Simonsen

    2012-01-01

    Abstract Job crafting describes a set of proactive behaviours in which employees may engage to shape their work in order to minimize hindering job demands and maximize resources and challenging demands. Such behaviours may be particularly important among blue-collar workers whose jobs are charact......Abstract Job crafting describes a set of proactive behaviours in which employees may engage to shape their work in order to minimize hindering job demands and maximize resources and challenging demands. Such behaviours may be particularly important among blue-collar workers whose jobs...... are characterized by poor working conditions and low well-being. We present the development and adaptation of a job crafting measure that may be used among blue-collar workers, based on an existing scale by Tims, Bakker, and Derks (2012) that was not specifically developed for blue-collar workers. We test......, increasing social job resources, increasing quantitative demands and decreasing hindering job demands. These can be reliably measured with 15 items. The measure shows acceptable discriminant and criterion validity, and test-retest reliability. The findings extend the application of the original questionnaire...

  8. Design and Validation with Measurements of the LEIR Injection Line

    CERN Document Server

    Roncarolo, F; Chanel, M; Dumas, L; Scrivens, R

    2006-01-01

    The CERN Low Energy Ion Ring (LEIR) commissioning started in the year 2005. O4+and Pb54+ion beams are transferred at 4.2 MeV/nucleon from Linac 3 to LEIR through a low energy transfer line, for which the constraints and the resulting optics design are presented. First trajectory and dispersion measurements agreed only poorly with the theoretical model. Iterations of a refined optics model and further measurements improved the agreement between experimental observations and expectations. In particular, the effect of quadrupole errors in the line dipole magnets is discussed.

  9. Development and empirical validation of symmetric component measures of multidimensional constructs: customer and competitor orientation.

    Science.gov (United States)

    Sørensen, Hans Eibe; Slater, Stanley F

    2008-08-01

    Atheoretical measure purification may lead to construct deficient measures. The purpose of this paper is to provide a theoretically driven procedure for the development and empirical validation of symmetric component measures of multidimensional constructs. Particular emphasis is placed on establishing a formalized three-step procedure for achieving a posteriori content validity. Then the procedure is applied to development and empirical validation of two symmetrical component measures of market orientation, customer orientation and competitor orientation. Analysis suggests that average variance extracted is particularly critical to reliability in the respecification of multi-indicator measures. In relation to this, the results also identify possible deficiencies in using Cronbach alpha for establishing reliable and valid measures.

  10. Assessing the validity of parenting measures in a sample of chinese adolescents.

    Science.gov (United States)

    Supple, Andrew J; Peterson, Gary W; Bush, Kevin R

    2004-09-01

    The purpose of this study was to assess the construct validity of adolescent-report parenting behavior measures (primarily derived from the Parental Behavior Measure) in a sample of 480 adolescents from Beijing, China. Results suggest that maternal support, monitoring, and autonomy granting were valid measures when assessing maternal socialization strategies and Chinese adolescent development. Measures of punitiveness and love withdrawal demonstrated limited validity, whereas maternal positive induction demonstrated little validity. The major implications of these results are that measures of "negative" parenting that included physical or psychological manipulations may not have salience for the development of Chinese adolescents. Moreover, researchers and clinicians should question the applicability of instruments and measures designed to assess family process when working with individuals in families from diverse cultural backgrounds. Copyright 2004 American Psychological Association

  11. Validation of a Comprehensive Executive Learning and Development Measure

    Science.gov (United States)

    Akrofi, Solomon; Clarke, Nicholas; Vernon, Guy

    2011-01-01

    Evaluating the returns on intangible assets in general and executive human capital in particular is still a challenging endeavour. One possible means of addressing this challenge involves developing a broad measure of executive learning and development (L&D), encapsulating both the formal and informal activities that closely reflect the dynamic…

  12. Fiber-Optic Current Sensor Validation with Triggered Lightning Measurements

    Science.gov (United States)

    Nguyen, Truong X.; Ely, Jay J.; Szatkowski, George N.; Mata, Carlos T.; Mata, Angel G.; Snyder, Gary P.

    2013-01-01

    A fiber optic current sensor based on the Faraday Effect is developed that is highly suitable for aircraft installation and can measure total current enclosed in a fiber loop down to DC. Other attributes include being small, light-weight, non-conducting, safe from electromagnetic interference, and free of hysteresis and saturation. The Faraday Effect causes light polarization to rotate when exposed to a magnetic field in the direction of light propagation. Measuring the induced light polarization rotation in fiber loops yields the total current enclosed. Two sensor systems were constructed and installed at Camp Blanding, Florida, measuring rocket-triggered lightning. The systems were similar in design but with different laser wavelengths, sensitivities and ranges. Results are compared to a shunt resistor as reference. The 850nm wavelength system tested in summer 2011 showed good result comparison early. However, later results showed gradual amplitude increase with time, attributed to corroded connections affecting the 50-ohm output termination. The 1550nm system also yielded good results in the summer 2012. The successful measurements demonstrate the fiber optic sensor's accuracies in capturing real lightning currents, and represent an important step toward future aircraft installation.

  13. The Construct Validity of an Instrument for Measuring Type 2 ...

    African Journals Online (AJOL)

    Abstract. Purpose: To develop an instrument (DSCKQ-30) for measuring type 2 diabetic patients' knowledge of self-care practices. Methods: A 30-item questionnaire (DSCKQ-30) consisting of close ended questions was developed for this study. DSCKQ-30 was self administered to a cross-section of randomly selected 400 ...

  14. Construct Validity of Three Self-Report Measures of Creativity.

    Science.gov (United States)

    Fleenor, John W.; Taylor, Sylvester

    1994-01-01

    Relations were examined among the CPI Creativity Scale (CPI-CT), the MBTI Creativity Index (MBTI-CI), and the Kirton Adaption-Innovation Inventory (KAI; a style measure of behavioral preference) for samples of 431 to 12,115 managers. KAI scores were related to CPI-CT and MBTI-CI creativity levels. (SLD)

  15. Measuring the experience of hospitality : Scale development and validation

    NARCIS (Netherlands)

    Pijls-Hoekstra, Ruth; Groen, Brenda H.; Galetzka, Mirjam; Pruyn, Adriaan T.H.

    2017-01-01

    This paper identifies what customers experience as hospitality and subsequently presents a novel and compact assessment scale for measuring customers’ experience of hospitality at any kind of service organization. The Experience of Hospitality Scale (EH-Scale) takes a broader perspective compared to

  16. Cyclopentane combustion. Part II. Ignition delay measurements and mechanism validation

    KAUST Repository

    Rachidi, Mariam El

    2017-06-12

    This study reports cyclopentane ignition delay measurements over a wide range of conditions. The measurements were obtained using two shock tubes and a rapid compression machine, and were used to test a detailed low- and high-temperature mechanism of cyclopentane oxidation that was presented in part I of this study (Al Rashidi et al., 2017). The ignition delay times of cyclopentane/air mixtures were measured over the temperature range of 650–1350K at pressures of 20 and 40atm and equivalence ratios of 0.5, 1.0 and 2.0. The ignition delay times simulated using the detailed chemical kinetic model of cyclopentane oxidation show very good agreement with the experimental measurements, as well as with the cyclopentane ignition and flame speed data available in the literature. The agreement is significantly improved compared to previous models developed and investigated at higher temperatures. Reaction path and sensitivity analyses were performed to provide insights into the ignition-controlling chemistry at low, intermediate and high temperatures. The results obtained in this study confirm that cycloalkanes are less reactive than their non-cyclic counterparts. Moreover, cyclopentane, a high octane number and high octane sensitivity fuel, exhibits minimal low-temperature chemistry and is considerably less reactive than cyclohexane. This study presents the first experimental low-temperature ignition delay data of cyclopentane, a potential fuel-blending component of particular interest due to its desirable antiknock characteristics.

  17. Cyclopentane combustion. Part II. Ignition delay measurements and mechanism validation

    KAUST Repository

    Rachidi, Mariam El; Má rmol, Juan C.; Banyon, Colin; Sajid, Muhammad Bilal; Mehl, Marco; Pitz, William J.; Mohamed, Samah; Alfazazi, Adamu; Lu, Tianfeng; Curran, Henry J.; Farooq, Aamir; Sarathy, Mani

    2017-01-01

    This study reports cyclopentane ignition delay measurements over a wide range of conditions. The measurements were obtained using two shock tubes and a rapid compression machine, and were used to test a detailed low- and high-temperature mechanism of cyclopentane oxidation that was presented in part I of this study (Al Rashidi et al., 2017). The ignition delay times of cyclopentane/air mixtures were measured over the temperature range of 650–1350K at pressures of 20 and 40atm and equivalence ratios of 0.5, 1.0 and 2.0. The ignition delay times simulated using the detailed chemical kinetic model of cyclopentane oxidation show very good agreement with the experimental measurements, as well as with the cyclopentane ignition and flame speed data available in the literature. The agreement is significantly improved compared to previous models developed and investigated at higher temperatures. Reaction path and sensitivity analyses were performed to provide insights into the ignition-controlling chemistry at low, intermediate and high temperatures. The results obtained in this study confirm that cycloalkanes are less reactive than their non-cyclic counterparts. Moreover, cyclopentane, a high octane number and high octane sensitivity fuel, exhibits minimal low-temperature chemistry and is considerably less reactive than cyclohexane. This study presents the first experimental low-temperature ignition delay data of cyclopentane, a potential fuel-blending component of particular interest due to its desirable antiknock characteristics.

  18. Brief Report: Concurrent Validity of Autism Symptom Severity Measures

    Science.gov (United States)

    Reszka, Stephanie S.; Boyd, Brian A.; McBee, Matthew; Hume, Kara A.; Odom, Samuel L.

    2014-01-01

    The autism spectrum disorder (ASD) diagnostic classifications, according to the DSM-5, include a severity rating. Several screening and/or diagnostic measures, such as the autism diagnostic and observation schedule (ADOS), Childhood Autism Rating Scale (CARS) and social responsiveness scale (SRS) (teacher and parent versions), include an…

  19. Validity and Reliability of Field-Based Measures for Assessing Movement Skill Competency in Lifelong Physical Activities: A Systematic Review.

    Science.gov (United States)

    Hulteen, Ryan M; Lander, Natalie J; Morgan, Philip J; Barnett, Lisa M; Robertson, Samuel J; Lubans, David R

    2015-10-01

    It has been suggested that young people should develop competence in a variety of 'lifelong physical activities' to ensure that they can be active across the lifespan. The primary aim of this systematic review is to report the methodological properties, validity, reliability, and test duration of field-based measures that assess movement skill competency in lifelong physical activities. A secondary aim was to clearly define those characteristics unique to lifelong physical activities. A search of four electronic databases (Scopus, SPORTDiscus, ProQuest, and PubMed) was conducted between June 2014 and April 2015 with no date restrictions. Studies addressing the validity and/or reliability of lifelong physical activity tests were reviewed. Included articles were required to assess lifelong physical activities using process-oriented measures, as well as report either one type of validity or reliability. Assessment criteria for methodological quality were adapted from a checklist used in a previous review of sport skill outcome assessments. Movement skill assessments for eight different lifelong physical activities (badminton, cycling, dance, golf, racquetball, resistance training, swimming, and tennis) in 17 studies were identified for inclusion. Methodological quality, validity, reliability, and test duration (time to assess a single participant), for each article were assessed. Moderate to excellent reliability results were found in 16 of 17 studies, with 71% reporting inter-rater reliability and 41% reporting intra-rater reliability. Only four studies in this review reported test-retest reliability. Ten studies reported validity results; content validity was cited in 41% of these studies. Construct validity was reported in 24% of studies, while criterion validity was only reported in 12% of studies. Numerous assessments for lifelong physical activities may exist, yet only assessments for eight lifelong physical activities were included in this review

  20. Validation of ozone measurements from the Atmospheric Chemistry Experiment (ACE

    Directory of Open Access Journals (Sweden)

    E. Dupuy

    2009-01-01

    Full Text Available This paper presents extensive {bias determination} analyses of ozone observations from the Atmospheric Chemistry Experiment (ACE satellite instruments: the ACE Fourier Transform Spectrometer (ACE-FTS and the Measurement of Aerosol Extinction in the Stratosphere and Troposphere Retrieved by Occultation (ACE-MAESTRO instrument. Here we compare the latest ozone data products from ACE-FTS and ACE-MAESTRO with coincident observations from nearly 20 satellite-borne, airborne, balloon-borne and ground-based instruments, by analysing volume mixing ratio profiles and partial column densities. The ACE-FTS version 2.2 Ozone Update product reports more ozone than most correlative measurements from the upper troposphere to the lower mesosphere. At altitude levels from 16 to 44 km, the average values of the mean relative differences are nearly all within +1 to +8%. At higher altitudes (45–60 km, the ACE-FTS ozone amounts are significantly larger than those of the comparison instruments, with mean relative differences of up to +40% (about +20% on average. For the ACE-MAESTRO version 1.2 ozone data product, mean relative differences are within ±10% (average values within ±6% between 18 and 40 km for both the sunrise and sunset measurements. At higher altitudes (~35–55 km, systematic biases of opposite sign are found between the ACE-MAESTRO sunrise and sunset observations. While ozone amounts derived from the ACE-MAESTRO sunrise occultation data are often smaller than the coincident observations (with mean relative differences down to −10%, the sunset occultation profiles for ACE-MAESTRO show results that are qualitatively similar to ACE-FTS, indicating a large positive bias (mean relative differences within +10 to +30% in the 45–55 km altitude range. In contrast, there is no significant systematic difference in bias found for the ACE-FTS sunrise and sunset measurements.

  1. Use of electrochemical sensors for measurement of air pollution: correcting interference response and validating measurements

    Science.gov (United States)

    Cross, Eben S.; Williams, Leah R.; Lewis, David K.; Magoon, Gregory R.; Onasch, Timothy B.; Kaminsky, Michael L.; Worsnop, Douglas R.; Jayne, John T.

    2017-09-01

    The environments in which we live, work, and play are subject to enormous variability in air pollutant concentrations. To adequately characterize air quality (AQ), measurements must be fast (real time), scalable, and reliable (with known accuracy, precision, and stability over time). Lower-cost air-quality-sensor technologies offer new opportunities for fast and distributed measurements, but a persistent characterization gap remains when it comes to evaluating sensor performance under realistic environmental sampling conditions. This limits our ability to inform the public about pollution sources and inspire policy makers to address environmental justice issues related to air quality. In this paper, initial results obtained with a recently developed lower-cost air-quality-sensor system are reported. In this project, data were acquired with the ARISense integrated sensor package over a 4.5-month time interval during which the sensor system was co-located with a state-operated (Massachusetts, USA) air quality monitoring station equipped with reference instrumentation measuring the same pollutant species. This paper focuses on validating electrochemical (EC) sensor measurements of CO, NO, NO2, and O3 at an urban neighborhood site with pollutant concentration ranges (parts per billion by volume, ppb; 5 min averages, ±1σ): [CO] = 231 ± 116 ppb (spanning 84-1706 ppb), [NO] = 6.1 ± 11.5 ppb (spanning 0-209 ppb), [NO2] = 11.7 ± 8.3 ppb (spanning 0-71 ppb), and [O3] = 23.2 ± 12.5 ppb (spanning 0-99 ppb). Through the use of high-dimensional model representation (HDMR), we show that interference effects derived from the variable ambient gas concentration mix and changing environmental conditions over three seasons (sensor flow-cell temperature = 23.4 ± 8.5 °C, spanning 4.1 to 45.2 °C; and relative humidity = 50.1 ± 15.3 %, spanning 9.8-79.9 %) can be effectively modeled for the Alphasense CO-B4, NO-B4, NO2-B43F, and Ox-B421 sensors, yielding (5 min average) root

  2. Development and validation of a preference weight multiattribute health outcome measure for rheumatoid arthritis.

    Science.gov (United States)

    Chiou, Chiun-Fang; Suarez-Almazor, Maria E; Sherbourne, Cathy D; Chang, Chih-Hung; Reyes, Carolina; Dylan, Michelle; Ofman, Joshua; Wallace, Daniel J; Mizutani, Wesley; Weisman, Michael

    2006-12-01

    To develop and validate multiattribute measures for patients with rheumatoid arthritis (RA) to report health states and estimate preference weights. Survey materials were mailed to 748 patients. Factor analysis, an item response theory-based model, and an internal consistency test were used to identify attributes and evaluate items. Two multiattribute preference weight functions (MAPWF) were constructed. Construct validity of the new measures was then tested. Four hundred eighty-seven patients returned the survey; 24 items on 6 health attributes were selected to form the new outcomes measure. Two MAPWF were derived with preference weights measured with time tradeoff and visual analog scales as dependent variables. All validity test results were statistically significant. Our results reveal that the new measures are reliable and valid in assessing health states and associated preference weights of patients with RA.

  3. Reliability and validity of the AutoCAD software method in lumbar lordosis measurement.

    Science.gov (United States)

    Letafatkar, Amir; Amirsasan, Ramin; Abdolvahabi, Zahra; Hadadnezhad, Malihe

    2011-12-01

    The aim of this study was to determine the reliability and validity of the AutoCAD software method in lumbar lordosis measurement. Fifty healthy volunteers with a mean age of 23 ± 1.80 years were enrolled. A lumbar lateral radiograph was taken on all participants, and the lordosis was measured according to the Cobb method. Afterward, the lumbar lordosis degree was measured via AutoCAD software and flexible ruler methods. The current study is accomplished in 2 parts: intratester and intertester evaluations of reliability as well as the validity of the flexible ruler and software methods. Based on the intraclass correlation coefficient, AutoCAD's reliability and validity in measuring lumbar lordosis were 0.984 and 0.962, respectively. AutoCAD showed to be a reliable and valid method to measure lordosis. It is suggested that this method may replace those that are costly and involve health risks, such as radiography, in evaluating lumbar lordosis.

  4. Validation of landfill methane measurements from an unmanned aerial system

    DEFF Research Database (Denmark)

    Allen, Grant; Williams, Paul; Ricketts, hugo

    Landfill gas is made up of roughly equal amounts of methane and carbon dioxide. Modern UK landfills capture and use much of the methane gas as a fuel. But some methane escapes and is emitted to the atmosphere. Methane is an important greenhouse gas and controls on methane emissions are a part...... of international and national strategies to limit climate change. Better estimates of methane emissions from landfills and other similar sources would allow the UK to improve the quantification and control of greenhouse gas emissions. This project tested the accuracy of methane measurement using an unmanned aerial...

  5. Feasibility and validity of frailty measurement in geriatric rehabilitation.

    Science.gov (United States)

    Arjunan, Aparna; Peel, Nancye M; Hubbard, Ruth E

    2018-02-10

    The measurement of frailty using a Frailty Index (FI) has been criticised as too time-consuming for use in hospital settings. We aimed to assess the feasibility and characteristics of an FI derived from routinely collected data. A total of 258 participants aged 65 and older were included in a single-centre prospective cohort study conducted in inpatient geriatric rehabilitation wards. The functional independence measure (FIM™), medication count and comorbidities were coded as deficits. An FI could be derived in all participants. It was normally distributed with a mean (SD) of 0.42 (0.13) and reached a submaximal limit of 0.69. Adjusting for age and sex, the odds ratio of a poor outcome (death/discharge to higher care) was 1.38 (confidence interval 1.11-1.70) per unit (0.1) increase in FI. Derivation of an FI from routinely collected data is feasible in geriatric rehabilitation settings and is predictive of poor outcomes. © 2018 AJA Inc.

  6. Simple procedure for phase-space measurement and entanglement validation

    Science.gov (United States)

    Rundle, R. P.; Mills, P. W.; Tilma, Todd; Samson, J. H.; Everitt, M. J.

    2017-08-01

    It has recently been shown that it is possible to represent the complete quantum state of any system as a phase-space quasiprobability distribution (Wigner function) [Phys. Rev. Lett. 117, 180401 (2016), 10.1103/PhysRevLett.117.180401]. Such functions take the form of expectation values of an observable that has a direct analogy to displaced parity operators. In this work we give a procedure for the measurement of the Wigner function that should be applicable to any quantum system. We have applied our procedure to IBM's Quantum Experience five-qubit quantum processor to demonstrate that we can measure and generate the Wigner functions of two different Bell states as well as the five-qubit Greenberger-Horne-Zeilinger state. Because Wigner functions for spin systems are not unique, we define, compare, and contrast two distinct examples. We show how the use of these Wigner functions leads to an optimal method for quantum state analysis especially in the situation where specific characteristic features are of particular interest (such as for spin Schrödinger cat states). Furthermore we show that this analysis leads to straightforward, and potentially very efficient, entanglement test and state characterization methods.

  7. Validation of an Instrument to Measure High School Students' Attitudes toward Fitness Testing

    Science.gov (United States)

    Mercier, Kevin; Silverman, Stephen

    2014-01-01

    Purpose: The purpose of this investigation was to develop an instrument that has scores that are valid and reliable for measuring students' attitudes toward fitness testing. Method: The method involved the following steps: (a) an elicitation study, (b) item development, (c) a pilot study, and (d) a validation study. The pilot study included 427…

  8. Validation of measures for assessing management and evaluation skills in university professors

    OpenAIRE

    Domínguez Guedea, Miriam; Laros, Jacobo; Domínguez Guedea, Rosario–Leticia

    2010-01-01

    We present the results of a validation process two scales to measure skills of teachers teaching in a public university in Mexico. The elements to consider in this project were checking to test the construct validity and reliability of the method of collection, as well as contributing to the technical dimension of the evaluation of teachers.

  9. The Reliability and Validity of Discrete and Continuous Measures of Psychopathology: A Quantitative Review

    Science.gov (United States)

    Markon, Kristian E.; Chmielewski, Michael; Miller, Christopher J.

    2011-01-01

    In 2 meta-analyses involving 58 studies and 59,575 participants, we quantitatively summarized the relative reliability and validity of continuous (i.e., dimensional) and discrete (i.e., categorical) measures of psychopathology. Overall, results suggest an expected 15% increase in reliability and 37% increase in validity through adoption of a…

  10. Validity Evidence for the Security Scale as a Measure of Perceived Attachment Security in Adolescence

    Science.gov (United States)

    Van Ryzin, Mark J.; Leve, Leslie D.

    2012-01-01

    In this study, the validity of a self-report measure of children's perceived attachment security (the Kerns Security Scale) was tested using adolescents. With regards to predictive validity, the Security Scale was significantly associated with (1) observed mother-adolescent interactions during conflict and (2) parent- and teacher-rated social…

  11. Measuring Children’s Perceptions of Robots’ Social Competence : Design and Validation

    NARCIS (Netherlands)

    Davison, Daniel Patrick; Charisi, Vasiliki; Wijnen, Frances Martine; Reidsma, Dennis; Evers, Vanessa; Kheddar, Abderrahmane; Yoshida, Eiichi; Ge, Shuzhi Sam; Suzuki, Kenji; Cabibihan, John-John; Eyssel, Friederike; He, Hongsheng

    2017-01-01

    This paper presents the design and validation of a measurement instrument for children’s perceptions of robots’ social competence. The need for a standardized validated instrument has emerged as a requisite for meta-analyses and comparisons among various studies in the field of child-robot

  12. Predictive Validity of Curriculum-Based Measures for English Learners at Varying English Proficiency Levels

    Science.gov (United States)

    Kim, Jennifer Sun; Vanderwood, Michael L.; Lee, Catherine Y.

    2016-01-01

    This study examined the predictive validity of curriculum-based measures in reading for Spanish-speaking English learners (ELs) at various levels of English proficiency. Third-grade Spanish-speaking EL students were screened during the fall using DIBELS Oral Reading Fluency (DORF) and Daze. Predictive validity was examined in relation to spring…

  13. Validation of ACE-FTS N2O measurements

    Directory of Open Access Journals (Sweden)

    G. P. Stiller

    2008-08-01

    Full Text Available The Atmospheric Chemistry Experiment (ACE, also known as SCISAT, was launched on 12 August 2003, carrying two instruments that measure vertical profiles of atmospheric constituents using the solar occultation technique. One of these instruments, the ACE Fourier Transform Spectrometer (ACE-FTS, is measuring volume mixing ratio (VMR profiles of nitrous oxide (N2O from the upper troposphere to the lower mesosphere at a vertical resolution of about 3–4 km. In this study, the quality of the ACE-FTS version 2.2 N2O data is assessed through comparisons with coincident measurements made by other satellite, balloon-borne, aircraft, and ground-based instruments. These consist of vertical profile comparisons with the SMR, MLS, and MIPAS satellite instruments, multiple aircraft flights of ASUR, and single balloon flights of SPIRALE and FIRS-2, and partial column comparisons with a network of ground-based Fourier Transform InfraRed spectrometers (FTIRs. Between 6 and 30 km, the mean absolute differences for the satellite comparisons lie between −42 ppbv and +17 ppbv, with most within ±20 ppbv. This corresponds to relative deviations from the mean that are within ±15%, except for comparisons with MIPAS near 30 km, for which they are as large as 22.5%. Between 18 and 30 km, the mean absolute differences for the satellite comparisons are generally within ±10 ppbv. From 30 to 60 km, the mean absolute differences are within ±4 ppbv, and are mostly between −2 and +1 ppbv. Given the small N2O VMR in this region, the relative deviations from the mean are therefore large at these altitudes, with most suggesting a negative bias in the ACE-FTS data between 30 and 50 km. In the comparisons with the FTIRs, the mean relative differences between the ACE-FTS and FTIR partial columns (which cover a mean altitude range of 14 to 27 km are within ±5.6% for eleven of the twelve contributing stations. This mean relative difference is negative at ten stations

  14. Field Trial Measurements to Validate a Stochastic Aircraft Boarding Model

    Directory of Open Access Journals (Sweden)

    Michael Schultz

    2018-03-01

    Full Text Available Efficient boarding procedures have to consider both operational constraints and the individual passenger behavior. In contrast to the aircraft handling processes of fueling, catering and cleaning, the boarding process is more driven by passengers than by airport or airline operators. This paper delivers a comprehensive set of operational data including classification of boarding times, passenger arrival times, times to store hand luggage, and passenger interactions in the aircraft cabin as a reliable basis for calibrating models for aircraft boarding. In this paper, a microscopic approach is used to model the passenger behavior, where the passenger movement is defined as a one-dimensional, stochastic, and time/space discrete transition process. This model is used to compare measurements from field trials of boarding procedures with simulation results and demonstrates a deviation smaller than 5%.

  15. Development and Validation of the Pretending Orgasm Reasons Measure.

    Science.gov (United States)

    Goodman, Danya L; Gillath, Omri; Haj-Mohamadi, Parnia

    2017-10-01

    Pretending orgasm is a widespread phenomenon, reported by both men and women. We report here on the development of a new measure to assess reasons for pretending. In three studies, using large diverse samples, we obtained a comprehensive list of reasons for pretending orgasms (Study 1; N = 46) and conducted both exploratory (Study 2; N = 416) and confirmatory (Study 3; N = 1010) factor analyses identifying six reasons for pretending an orgasm: feels good, for partner, not into sex, manipulation/power, insecurity, and emotional communication. Sexual dysfunction was correlated with frequency of pretending orgasms for reasons such as insecure, not into sex, for partner, and emotional communication. Usefulness for future research and clinical implications are discussed.

  16. Field validation of secondary data sources: a novel measure of representativity applied to a Canadian food outlet database.

    Science.gov (United States)

    Clary, Christelle M; Kestens, Yan

    2013-06-19

    Validation studies of secondary datasets used to characterize neighborhood food businesses generally evaluate how accurately the database represents the true situation on the ground. Depending on the research objectives, the characterization of the business environment may tolerate some inaccuracies (e.g. minor imprecisions in location or errors in business names). Furthermore, if the number of false negatives (FNs) and false positives (FPs) is balanced within a given area, one could argue that the database still provides a "fair" representation of existing resources in this area. Yet, traditional validation measures do not relax matching criteria, and treat FNs and FPs independently. Through the field validation of food businesses found in a Canadian database, this paper proposes alternative criteria for validity. Field validation of the 2010 Enhanced Points of Interest (EPOI) database (DMTI Spatial®) was performed in 2011 in 12 census tracts (CTs) in Montreal, Canada. Some 410 food outlets were extracted from the database and 484 were observed in the field. First, traditional measures of sensitivity and positive predictive value (PPV) accounting for every single mismatch between the field and the database were computed. Second, relaxed measures of sensitivity and PPV that tolerate mismatches in business names or slight imprecisions in location were assessed. A novel measure of representativity that further allows for compensation between FNs and FPs within the same business category and area was proposed. Representativity was computed at CT level as ((TPs +|FPs-FNs|)/(TPs+FNs)), with TPs meaning true positives, and |FPs-FNs| being the absolute value of the difference between the number of FNs and the number of FPs within each outlet category. The EPOI database had a "moderate" capacity to detect an outlet present in the field (sensitivity: 54.5%) or to list only the outlets that actually existed in the field (PPV: 64.4%). Relaxed measures of sensitivity and PPV

  17. Preliminary validation of a questionnaire to measure basic psychological needs in Physical Education

    Directory of Open Access Journals (Sweden)

    A. Pires

    2010-01-01

    Full Text Available The self-determination theory is a psychological approach to motivation that focuses on causes and consequences of human behavior regulation. According several authors, this theoretical framework could provide important information about the student’s motivational process to physical education class, however, in Portugal does not exists any instrument to measure the basic psychological needs in this domain. So, the main propose of this study is the preliminary adaptation to physical education contexts of Basic Psychological Needs Exercise Scale (Portuguese version: BPNESp, and determine their initial psychometrics properties through an exploratory factor analysis. This propose was accomplished with a sample of 150 students (n=150 from de 2nd and 3rd CEB, aged from 11 to 16 years (M = 13.39, SD = 1.44 with different levels of sports practice. Results revealed a factorial structure just like the original model (12 items grouped in 3 factors, with 4 items hitch factor and presents acceptable values of validity and reliability. Those findings allow us to conclude, that questionnaire can be used in future investigations to measure the basic psychological needs in physical education.

  18. Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter.

    Science.gov (United States)

    Priftis, Alexandros; Stagos, Dimitrios; Tzioumakis, Nikolaos; Konstantinopoulos, Konstantinos; Patouna, Anastasia; Papadopoulos, Georgios E; Tsatsakis, Aristides; Kouretas, Dimitrios

    2016-08-30

    Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices) in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

  19. Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter

    Directory of Open Access Journals (Sweden)

    Alexandros Priftis

    2016-08-01

    Full Text Available Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

  20. Suspended sediment assessment by combining sound attenuation and backscatter measurements - analytical method and experimental validation

    Science.gov (United States)

    Guerrero, Massimo; Di Federico, Vittorio

    2018-03-01

    The use of acoustic techniques has become common for estimating suspended sediment in water environments. An emitted beam propagates into water producing backscatter and attenuation, which depend on scattering particles concentration and size distribution. Unfortunately, the actual particles size distribution (PSD) may largely affect the accuracy of concentration quantification through the unknown coefficients of backscattering strength, ks2, and normalized attenuation, ζs. This issue was partially solved by applying the multi-frequency approach. Despite this possibility, a relevant scientific and practical question remains regarding the possibility of using acoustic methods to investigate poorly sorted sediment in the spectrum ranging from clay to fine sand. The aim of this study is to investigate the possibility of combining the measurement of sound attenuation and backscatter to determine ζs for the suspended particles and the corresponding concentration. The proposed method is moderately dependent from actual PSD, thus relaxing the need of frequent calibrations to account for changes in ks2 and ζs coefficients. Laboratory tests were conducted under controlled conditions to validate this measurement technique. With respect to existing approaches, the developed method more accurately estimates the concentration of suspended particles ranging from clay to fine sand and, at the same time, gives an indication on their actual PSD.

  1. Measuring Social Relationships in Different Social Systems: The Construction and Validation of the Evaluation of Social Systems (EVOS) Scale

    Science.gov (United States)

    Aguilar-Raab, Corina; Grevenstein, Dennis; Schweitzer, Jochen

    2015-01-01

    Social interactions have gained increasing importance, both as an outcome and as a possible mediator in psychotherapy research. Still, there is a lack of adequate measures capturing relational aspects in multi-person settings. We present a new measure to assess relevant dimensions of quality of relationships and collective efficacy regarding interpersonal interactions in diverse personal and professional social systems including couple partnerships, families, and working teams: the EVOS. Theoretical dimensions were derived from theories of systemic family therapy and organizational psychology. The study was divided in three parts: In Study 1 (N = 537), a short 9-item scale with two interrelated factors was constructed on the basis of exploratory factor analysis. Quality of relationship and collective efficacy emerged as the most relevant dimensions for the quality of social systems. Study 2 (N = 558) confirmed the measurement model using confirmatory factor analysis and established validity with measures of family functioning, life satisfaction, and working team efficacy. Measurement invariance was assessed to ensure that EVOS captures the same latent construct in all social contexts. In Study 3 (N = 317), an English language adaptation was developed, which again confirmed the original measurement model. The EVOS is a theory-based, economic, reliable, and valid measure that covers important aspects of social relationships, applicable for different social systems. It is the first instrument of its kind and an important addition to existing measures of social relationships and related outcome measures in therapeutic and other counseling settings involving multiple persons. PMID:26200357

  2. Measuring Social Relationships in Different Social Systems: The Construction and Validation of the Evaluation of Social Systems (EVOS Scale.

    Directory of Open Access Journals (Sweden)

    Corina Aguilar-Raab

    Full Text Available Social interactions have gained increasing importance, both as an outcome and as a possible mediator in psychotherapy research. Still, there is a lack of adequate measures capturing relational aspects in multi-person settings. We present a new measure to assess relevant dimensions of quality of relationships and collective efficacy regarding interpersonal interactions in diverse personal and professional social systems including couple partnerships, families, and working teams: the EVOS. Theoretical dimensions were derived from theories of systemic family therapy and organizational psychology. The study was divided in three parts: In Study 1 (N = 537, a short 9-item scale with two interrelated factors was constructed on the basis of exploratory factor analysis. Quality of relationship and collective efficacy emerged as the most relevant dimensions for the quality of social systems. Study 2 (N = 558 confirmed the measurement model using confirmatory factor analysis and established validity with measures of family functioning, life satisfaction, and working team efficacy. Measurement invariance was assessed to ensure that EVOS captures the same latent construct in all social contexts. In Study 3 (N = 317, an English language adaptation was developed, which again confirmed the original measurement model. The EVOS is a theory-based, economic, reliable, and valid measure that covers important aspects of social relationships, applicable for different social systems. It is the first instrument of its kind and an important addition to existing measures of social relationships and related outcome measures in therapeutic and other counseling settings involving multiple persons.

  3. Validation of diffusion tensor MRI measurements of cardiac microstructure with structure tensor synchrotron radiation imaging.

    Science.gov (United States)

    Teh, Irvin; McClymont, Darryl; Zdora, Marie-Christine; Whittington, Hannah J; Davidoiu, Valentina; Lee, Jack; Lygate, Craig A; Rau, Christoph; Zanette, Irene; Schneider, Jürgen E

    2017-03-10

    Diffusion tensor imaging (DTI) is widely used to assess tissue microstructure non-invasively. Cardiac DTI enables inference of cell and sheetlet orientations, which are altered under pathological conditions. However, DTI is affected by many factors, therefore robust validation is critical. Existing histological validation is intrinsically flawed, since it requires further tissue processing leading to sample distortion, is routinely limited in field-of-view and requires reconstruction of three-dimensional volumes from two-dimensional images. In contrast, synchrotron radiation imaging (SRI) data enables imaging of the heart in 3D without further preparation following DTI. The objective of the study was to validate DTI measurements based on structure tensor analysis of SRI data. One isolated, fixed rat heart was imaged ex vivo with DTI and X-ray phase contrast SRI, and reconstructed at 100 μm and 3.6 μm isotropic resolution respectively. Structure tensors were determined from the SRI data and registered to the DTI data. Excellent agreement in helix angles (HA) and transverse angles (TA) was observed between the DTI and structure tensor synchrotron radiation imaging (STSRI) data, where HA DTI-STSRI  = -1.4° ± 23.2° and TA DTI-STSRI  = -1.4° ± 35.0° (mean ± 1.96 standard deviation across all voxels in the left ventricle). STSRI confirmed that the primary eigenvector of the diffusion tensor corresponds with the cardiomyocyte long-axis across the whole myocardium. We have used STSRI as a novel and high-resolution gold standard for the validation of DTI, allowing like-with-like comparison of three-dimensional tissue structures in the same intact heart free of distortion. This represents a critical step forward in independently verifying the structural basis and informing the interpretation of cardiac DTI data, thereby supporting the further development and adoption of DTI in structure-based electro-mechanical modelling and routine clinical

  4. Latency-Based and Psychophysiological Measures of Sexual Interest Show Convergent and Concurrent Validity.

    Science.gov (United States)

    Ó Ciardha, Caoilte; Attard-Johnson, Janice; Bindemann, Markus

    2018-04-01

    Latency-based measures of sexual interest require additional evidence of validity, as do newer pupil dilation approaches. A total of 102 community men completed six latency-based measures of sexual interest. Pupillary responses were recorded during three of these tasks and in an additional task where no participant response was required. For adult stimuli, there was a high degree of intercorrelation between measures, suggesting that tasks may be measuring the same underlying construct (convergent validity). In addition to being correlated with one another, measures also predicted participants' self-reported sexual interest, demonstrating concurrent validity (i.e., the ability of a task to predict a more validated, simultaneously recorded, measure). Latency-based and pupillometric approaches also showed preliminary evidence of concurrent validity in predicting both self-reported interest in child molestation and viewing pornographic material containing children. Taken together, the study findings build on the evidence base for the validity of latency-based and pupillometric measures of sexual interest.

  5. Validation of MCNP NPP Activation Simulations for Decommissioning Studies by Analysis of NPP Neutron Activation Foil Measurement Campaigns

    Directory of Open Access Journals (Sweden)

    Volmert Ben

    2016-01-01

    Full Text Available In this paper, an overview of the Swiss Nuclear Power Plant (NPP activation methodology is presented and the work towards its validation by in-situ NPP foil irradiation campaigns is outlined. Nuclear Research and consultancy Group (NRG in The Netherlands has been given the task of performing the corresponding neutron metrology. For this purpose, small Aluminium boxes containing a set of circular-shaped neutron activation foils have been prepared. After being irradiated for one complete reactor cycle, the sets have been successfully retrieved, followed by gamma-spectrometric measurements of the individual foils at NRG. Along with the individual activities of the foils, the reaction rates and thermal, intermediate and fast neutron fluence rates at the foil locations have been determined. These determinations include appropriate corrections for gamma self-absorption and neutron self-shielding as well as corresponding measurement uncertainties. The comparison of the NPP Monte Carlo calculations with the results of the foil measurements is done by using an individual generic MCNP model functioning as an interface and allowing the simulation of individual foil activation by predetermined neutron spectra. To summarize, the comparison between calculation and measurement serve as a sound validation of the Swiss NPP activation methodology by demonstrating a satisfying agreement between measurement and calculation. Finally, the validation offers a chance for further improvements of the existing NPP models by ensuing calibration and/or modelling optimizations for key components and structures.

  6. Software Process Validation: Quantitatively Measuring the Correspondence of a Process to a Model

    National Research Council Canada - National Science Library

    Cook, Jonathan E; Wolf, Alexander L

    1997-01-01

    .... When process models and process executions diverge, something significant is happening. The authors have developed techniques for uncovering and measuring the discrepancies between models and executions, which they call process validation...

  7. Measuring self-esteem in dieting disordered patients: the validity of the Rosenberg and Coopersmith contrasted.

    Science.gov (United States)

    Griffiths, R A; Beumont, P J; Giannakopoulos, E; Russell, J; Schotte, D; Thornton, C; Touyz, S W; Varano, P

    1999-03-01

    In order to ascertain the most appropriate measure of self-esteem for dieting disordered patients, this study contrasted the construct and convergent validities of two widely used measures. In addition, dieting disordered subgroups were compared on levels of self-esteem. One hundred and seventeen male and female patients diagnosed with anorexia nervosa, bulimia nervosa, or eating disorder not otherwise specified completed the Rosenberg Self-Esteem Scale (SES), the Coopersmith Self-Esteem Inventory (SEI), and measures of dieting disorder pathology and depression. No significant differences among the three dieting disorder subgroups were found. In determining convergent validity, regression analyses indicated that the SES was a significant predictor of dieting disorder psychopathology whereas the SEI was not. Of the two self-esteem measures, only the SES showed evidence of convergent validity. The results suggest that the SES has sounder construct and convergent validity than the SEI. Hence, the SES may be more appropriate for use with dieting disordered populations.

  8. Quantum Fisher information on its own is not a valid measure of the coherence

    Science.gov (United States)

    Kwon, Hyukjoon; Tan, Kok Chuan; Choi, Seongjeon; Jeong, Hyunseok

    2018-06-01

    We show that contrary to the claim in Feng and Wei (2017), the quantum Fisher information itself is not a valid measure of the coherence based on the resource theory because it can increase via an incoherent operation.

  9. Construction and Validation of a Scale to Measure Maslow's Concept of Self-Actualization

    Science.gov (United States)

    Jones, Kenneth Melvin; Randolph, Daniel Lee

    1978-01-01

    Designed to measure self-actualization as defined by Abraham Maslow, the Jones Self Actualizing Scale, as assessed in this study, possesses content validity, reliability, and a number of other positive characteristics. (JC)

  10. Measuring production loss due to health and work environment problems: construct validity and implications.

    Science.gov (United States)

    Karlsson, Malin Lohela; Bergström, Gunnar; Björklund, Christina; Hagberg, Jan; Jensen, Irene

    2013-12-01

    The aim was to validate two measures of production loss, health-related and work environment-related production loss, concerning their associations with health status and work environment factors. Validity was assessed by evaluating the construct validity. Health problems related and work environment-related problems (or factors) were included in separate analyses and evaluated regarding the significant difference in proportion of explained variation (R) of production loss. health problems production loss was not found to fulfill the criteria for convergent validity in this study; however, the measure of work environment-related production loss did fulfill the criteria that were set up. The measure of work environment-related production loss can be used to screen for production loss due to work environment problems as well as an outcome measure when evaluating the effect of organizational interventions.

  11. Investigation of the effectiveness of structural measures for reducing the radiation exposure of the population in aeras with enhanced natural radioactivity. A measuring campaign in existing buildings

    International Nuclear Information System (INIS)

    Leidner, L.; Urban, M.

    1986-01-01

    For this measuring campaign, buildings of different structural design located close to each other have been selected in an area with enhanced natural radioactivity in order to find out any differences in indoor radioactivity levels that can be attributed to structural design features. The measuring results show that the structural condition of the cellar is the decisive factor determining the radon concentration in a house for the case that the surrounding earth is the main radon source. In houses with an unimpaired concrete cellar flooring, radon concentrations in the ground floor have been found to be lower by a factor of 5-10 than in houses with a natural rock basement. Building materials have been found to have an effect at only comparably low radon concentrations. Expected impacts of structural measures, as e.g. thermal insulation windows, could not be proven (except for some half-timber buildings). The results of this measuring campaign that allow a direct house-to-house comparison do not confirm the relation between gamma dose rate and radon concentration postulated by results of a data collection campaign made in various administrative districts. The effectiveness of given structural variations cannot be proven by measurements in existing houses. This would rather require pin-pointed structural modifications for assessment, which can be done in a building chosen for this purpose. (orig./HP) [de

  12. Burden to importance ratio as a quantitative measure to validate the RISC-3 SSC in OPTION-2

    International Nuclear Information System (INIS)

    Ha, J. S.; Sung, P. H.

    2004-01-01

    A Risk-Informed Safety Significance Categorization (RISSC) is to categorize structures, systems, or components (SSCs) of a Nuclear Power Plant (NPP) into two or more groups, according to their safety significance using both probabilistic and deterministic insights. Recently, OPTION-2 (which is an emerging risk-informed paradigm) recommends that SSCs should be categorized into four groups according to whether they are safety-related or not as well as their safety significance. With the change of 10 CFR 50, safety-related components which categorized into low safety significant SSC (RISC-3 SSC) can be exempted from the existing conservative requirements. Consequently, as OPTION-2 paradigm is applied, a validation process focused on the RISC-3 SSC is needed to assure the categorization results, because most of existing RISSC methods focused on the categorization of the whole SSCs of NPPs based on importance measures obtained from probabilistic and deterministic insights. In this work, Burden to Importance Ratio (BIR) is utilized as a measure for the validation of RISC-3 SSC in OPTION-2. To demonstrate the usefulness of the proposed approach, the approach is applied to 22 components selected from 512 In-Service Test (IST) components of Ulchin unit 3. The results of the application show that the proposed approach is useful for the validation of RISC-3 SSC in OPTION-2

  13. Measuring perceptions related to e-cigarettes: Important principles and next steps to enhance study validity.

    Science.gov (United States)

    Gibson, Laura A; Creamer, MeLisa R; Breland, Alison B; Giachello, Aida Luz; Kaufman, Annette; Kong, Grace; Pechacek, Terry F; Pepper, Jessica K; Soule, Eric K; Halpern-Felsher, Bonnie

    2018-04-01

    Measuring perceptions associated with e-cigarette use can provide valuable information to help explain why youth and adults initiate and continue to use e-cigarettes. However, given the complexity of e-cigarette devices and their continuing evolution, measures of perceptions of this product have varied greatly. Our goal, as members of the working group on e-cigarette measurement within the Tobacco Centers of Regulatory Science (TCORS) network, is to provide guidance to researchers developing surveys concerning e-cigarette perceptions. We surveyed the 14 TCORS sites and received and reviewed 371 e-cigarette perception items from seven sites. We categorized the items based on types of perceptions asked, and identified measurement approaches that could enhance data validity and approaches that researchers may consider avoiding. The committee provides suggestions in four areas: (1) perceptions of benefits, (2) harm perceptions, (3) addiction perceptions, and (4) perceptions of social norms. Across these 4 areas, the most appropriate way to assess e-cigarette perceptions depends largely on study aims. The type and number of items used to examine e-cigarette perceptions will also vary depending on respondents' e-cigarette experience (i.e., user vs. non-user), level of experience (e.g., experimental vs. established), type of e-cigarette device (e.g., cig-a-like, mod), and age. Continuous formative work is critical to adequately capture perceptions in response to the rapidly changing e-cigarette landscape. Most important, it is imperative to consider the unique perceptual aspects of e-cigarettes, building on the conventional cigarette literature as appropriate, but not relying on existing conventional cigarette perception items without adjustment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Electron Temperature Fluctuation Measurements and Transport Model Validation at Alcator C-Mod

    Energy Technology Data Exchange (ETDEWEB)

    White, Anne [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-06-22

    The tokamak is a type of toroidal device used to confine a fusion plasma using large magnetic fields. Tokamaks and stellarators the leading devices for confining plasmas for fusion, and the capability to predict performance in these magnetically confined plasmas is essential for developing a sustainable fusion energy source. The magnetic configuration of tokamaks and stellarators does not exist in Nature, yet, the fundamental processes governing transport in fusion plasmas are universal – turbulence and instabilities, driven by inhomogeneity and asymmetry in the plasma, conspire to transport heat and particles across magnetic field lines and can play critical roles in impurity confinement and generation of intrinsic rotation. Turbulence exists in all plasmas, and in neutral fluids as well. The study of turbulence is essential to developing a fundamental understanding of the nature of the fourth state of matter, plasmas. Experimental studies of turbulence in tokamaks date back to early scattering observations from the late 1970s. Since that time, great advances in turbulence diagnostics have been made, all of which have significantly enhanced our knowledge and understanding of turbulence in tokamaks. Through comparisons with advanced gyrokinetic theory and turbulent-transport models a great deal of evidence exists to implicate turbulent-driven transport as an important mechanism determining transport in all channels: heat, particle and momentum However, prediction and control of turbulent-driven transport remains elusive. Key to development of predictive transport models for magnetically confined fusion plasmas is validation of the nonlinear gyrokinetic transport model, which describes transport due to turbulence. Validation of gyrokinetic codes must include detailed and quantitative comparisons with measured turbulence characteristics, in addition to comparisons with inferred transport levels and equilibrium profiles. For this reason, advanced plasma diagnostics

  15. Development and empirical validation of symmetric component measures of multi-dimensional constructs

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Slater, Stanley F.

    2008-01-01

    Atheoretical measure purification may lead to construct deficient measures. The purpose of this paper is to provide a theoretically driven procedure for the development and empirical validation of symmetric component measures of multi-dimensional constructs. We place particular emphasis on establ...

  16. Measures of Emotional Intelligence and Social Acceptability in Children: A Concurrent Validity Study

    Science.gov (United States)

    Windingstad, Sunny; McCallum, R. Steve; Bell, Sherry Mee; Dunn, Patrick

    2011-01-01

    The concurrent validity of two measures of Emotional Intelligence (EI), one considered a trait measure, the other an ability measure, was examined by administering the Emotional Quotient Inventory: Youth Version (EQi:YV; Bar-On & Parker, 2000), the Mayer-Salovey-Caruso Emotional Intelligence Test: Youth Version (MSCEIT:YV; Mayer, Salovey, &…

  17. Measuring the Effect of Tourism Services on Travelers' Quality of Life: Further Validation.

    Science.gov (United States)

    Neal, Janet D.; Sirgy, M. Joseph; Uysal, Muzaffer

    2004-01-01

    lication and extension study provided additional validational support of the original tourism services satisfaction measure in relation to QOL-related measures.Neal, Sirgy and Uysal (1999) developed a model and a measure to capture the effect of tourism services on travelers' quality of life (QOL). They hypothesized that travelers' overall life…

  18. Experimental validation of error in temperature measurements in thin walled ductile iron castings

    DEFF Research Database (Denmark)

    Pedersen, Karl Martin; Tiedje, Niels Skat

    2007-01-01

    An experimental analysis has been performed to validate the measurement error of cooling curves measured in thin walled ductile cast iron. Specially designed thermocouples with Ø0.2 mm thermocouple wire in Ø1.6 mm ceramic tube was used for the experiments. Temperatures were measured in plates...

  19. The Deaf Acculturation Scale (DAS): Development and Validation of a 58-Item Measure

    Science.gov (United States)

    Maxwell-McCaw, Deborah; Zea, Maria Cecilia

    2011-01-01

    This study involved the development and validation of the Deaf Acculturation Scale (DAS), a new measure of cultural identity for Deaf and hard-of-hearing (hh) populations. Data for this study were collected online and involved a nation-wide sample of 3,070 deaf/hh individuals. Results indicated strong internal reliabilities for all the subscales, and construct validity was established by demonstrating that the DAS could discriminate groups based on parental hearing status, school background, and use of self-labels. Construct validity was further demonstrated through factorial analyses, and findings resulted in a final 58-item measure. Directions for future research are discussed. PMID:21263041

  20. Development and validation of a questionnaire designed to measure foot-health status.

    Science.gov (United States)

    Bennett, P J; Patterson, C; Wearing, S; Baglioni, T

    1998-09-01

    The aim of this study was to apply the principles of content, criterion, and construct validation to a new questionnaire specifically designed to measure foot-health status. One hundred eleven subjects completed two different questionnaires designed to measure foot health (the new Foot Health Status Questionnaire and the previously validated Foot Function Index) and underwent a clinical examination in order to provide data for a second-order confirmatory factor analysis. Presented herein is a psychometrically evaluated questionnaire that contains 13 items covering foot pain, foot function, footwear, and general foot health. The tool demonstrates a high degree of content, criterion, and construct validity and test-retest reliability.

  1. Establishing best practices for the validation of atmospheric composition measurements from satellites

    Science.gov (United States)

    Lambert, Jean-Christopher

    As a contribution to the implementation of the Global Earth Observation System of Systems (GEOSS), the Committee on Earth Observation Satellites (CEOS) is developing a data quality strategy for satellite measurements. To achieve GEOSS requirements of consistency and interoperability (e.g. for comparison and for integrated interpretation) of the measurements and their derived data products, proper uncertainty assessment is essential and needs to be continuously monitored and traceable to standards. Therefore, CEOS has undertaken the task to establish a set of best practices and guidelines for satellite validation, starting with current practices that could be improved with time. Best practices are not intended to be imposed as firm requirements, but rather to be suggested as a baseline for comparing against, which could be used by the widest community and provide guidance to newcomers. The present paper reviews the current development of best practices and guidelines for the validation of atmospheric composition satellites. Terminologies and general principles of validation are reminded. Going beyond elementary definitions of validation like the assessment of uncertainties, the specific GEOSS context calls also for validation of individual service components and against user requirements. This paper insists on two important aspects. First one, the question of the "collocation". Validation generally involves comparisons with "reference" measurements of the same quantities, and the question of what constitutes a valid comparison is not the least of the challenges faced. We present a tentative scheme for defining the validity of a comparison and of the necessary "collocation" criteria. Second focus of this paper: the information content of the data product. Validation against user requirements, or the verification of the "fitness for purpose" of both the data products and their validation, needs to identify what information, in the final product, is contributed really

  2. Measurement of informal care: an empirical study into the valid measurement of time spent on informal caregiving.

    NARCIS (Netherlands)

    Berg, Bernard van den; Spauwen, Pol

    2006-01-01

    The incorporation of informal care into economic evaluations of health care is troublesome. The debate focuses on the valuation of time spent on informal caregiving, while time measurement, a related and may be even a more important issue, tends to be neglected. Valid time measurement is a necessary

  3. Use of electrochemical sensors for measurement of air pollution: correcting interference response and validating measurements

    Directory of Open Access Journals (Sweden)

    E. S. Cross

    2017-09-01

    Full Text Available The environments in which we live, work, and play are subject to enormous variability in air pollutant concentrations. To adequately characterize air quality (AQ, measurements must be fast (real time, scalable, and reliable (with known accuracy, precision, and stability over time. Lower-cost air-quality-sensor technologies offer new opportunities for fast and distributed measurements, but a persistent characterization gap remains when it comes to evaluating sensor performance under realistic environmental sampling conditions. This limits our ability to inform the public about pollution sources and inspire policy makers to address environmental justice issues related to air quality. In this paper, initial results obtained with a recently developed lower-cost air-quality-sensor system are reported. In this project, data were acquired with the ARISense integrated sensor package over a 4.5-month time interval during which the sensor system was co-located with a state-operated (Massachusetts, USA air quality monitoring station equipped with reference instrumentation measuring the same pollutant species. This paper focuses on validating electrochemical (EC sensor measurements of CO, NO, NO2, and O3 at an urban neighborhood site with pollutant concentration ranges (parts per billion by volume, ppb; 5 min averages, ±1σ: [CO]  =  231 ± 116 ppb (spanning 84–1706 ppb, [NO]  =  6.1 ± 11.5 ppb (spanning 0–209 ppb, [NO2]  =  11.7 ± 8.3 ppb (spanning 0–71 ppb, and [O3]  =  23.2 ± 12.5 ppb (spanning 0–99 ppb. Through the use of high-dimensional model representation (HDMR, we show that interference effects derived from the variable ambient gas concentration mix and changing environmental conditions over three seasons (sensor flow-cell temperature  =  23.4 ± 8.5 °C, spanning 4.1 to 45.2 °C; and relative humidity  =  50.1 ± 15.3 %, spanning 9.8–79.9

  4. Validity of parent-reported weight and height of preschool children measured at home or estimated without home measurement: a validation study

    Directory of Open Access Journals (Sweden)

    Cox Bianca

    2011-07-01

    Full Text Available Abstract Background Parental reports are often used in large-scale surveys to assess children's body mass index (BMI. Therefore, it is important to know to what extent these parental reports are valid and whether it makes a difference if the parents measured their children's weight and height at home or whether they simply estimated these values. The aim of this study is to compare the validity of parent-reported height, weight and BMI values of preschool children (3-7 y-old, when measured at home or estimated by parents without actual measurement. Methods The subjects were 297 Belgian preschool children (52.9% male. Participation rate was 73%. A questionnaire including questions about height and weight of the children was completed by the parents. Nurses measured height and weight following standardised procedures. International age- and sex-specific BMI cut-off values were employed to determine categories of weight status and obesity. Results On the group level, no important differences in accuracy of reported height, weight and BMI were identified between parent-measured or estimated values. However, for all 3 parameters, the correlations between parental reports and nurse measurements were higher in the group of children whose body dimensions were measured by the parents. Sensitivity for underweight and overweight/obesity were respectively 73% and 47% when parents measured their child's height and weight, and 55% and 47% when parents estimated values without measurement. Specificity for underweight and overweight/obesity were respectively 82% and 97% when parents measured the children, and 75% and 93% with parent estimations. Conclusions Diagnostic measures were more accurate when parents measured their child's weight and height at home than when those dimensions were based on parental judgements. When parent-reported data on an individual level is used, the accuracy could be improved by encouraging the parents to measure weight and height

  5. Feasibility and validity of accelerometer measurements to assess physical activity in toddlers

    Directory of Open Access Journals (Sweden)

    De Bourdeaudhuij Ilse

    2011-06-01

    Full Text Available Abstract Background Accelerometers are considered to be the most promising tool for measuring physical activity (PA in free-living young children. So far, no studies have examined the feasibility and validity of accelerometer measurements in children under 3 years of age. Therefore, the purpose of the present study was to examine the feasibility and validity of accelerometer measurements in toddlers (1- to 3-year olds. Methods Forty-seven toddlers (25 boys; 20 ± 4 months wore a GT1M ActiGraph accelerometer for 6 consecutive days and parental perceptions of the acceptability of wearing the monitor were assessed to examine feasibility. To investigate the validity of the ActiGraph and the predictive validity of three ActiGraph cut points, accelerometer measurements of 31 toddlers (17 boys; 20 ± 4 months during free play at child care were compared to directly observed PA, using the Observational System for Recording Physical Activity in Children-Preschool (OSRAC-P. Validity was assessed using Pearson and Spearman correlations and predictive validity using area under the Receiver Operating Characteristic curve (ROC-AUC. Results The feasibility examination indicated that accelerometer measurements of 30 toddlers (63.8% could be included with a mean registration time of 564 ± 62 min during weekdays and 595 ± 83 min during weekend days. According to the parental reports, 83% perceived wearing the accelerometer as 'not unpleasant and not pleasant' and none as 'unpleasant'. The validity evaluation showed that mean ActiGraph activity counts were significantly and positively associated with mean OSRAC-P activity intensity (r = 0.66; p Conclusions The present findings suggest that ActiGraph accelerometer measurements are feasible and valid for quantifying PA in toddlers. However, further research is needed to accurately identify PA intensities in toddlers using accelerometry.

  6. Reliability and validity of the Japanese version of the Community Integration Measure for community-dwelling people with schizophrenia.

    Science.gov (United States)

    Shioda, Ai; Tadaka, Etsuko; Okochi, Ayako

    2017-01-01

    Community integration is an essential right for people with schizophrenia that affects their well-being and quality of life, but no valid instrument exists to measure it in Japan. The aim of the present study is to develop and evaluate the reliability and validity of the Japanese version of the Community Integration Measure (CIM) for people with schizophrenia. The Japanese version of the CIM was developed as a self-administered questionnaire based on the original version of the CIM, which was developed by McColl et al. This study of the Japanese CIM had a cross-sectional design. Construct validity was determined using a confirmatory factor analysis (CFA) and data from 291 community-dwelling people with schizophrenia in Japan. Internal consistency was calculated using Cronbach's alpha. The Lubben Social Network Scale (LSNS-6), the Rosenberg Self-Esteem Scale (RSE) and the UCLA Loneliness Scale, version 3 (UCLALS) were administered to assess the criterion-related validity of the Japanese version of the CIM. The participants were 263 people with schizophrenia who provided valid responses. The Cronbach's alpha was 0.87, and CFA identified one domain with ten items that demonstrated the following values: goodness of fit index = 0.924, adjusted goodness of fit index = 0.881, comparative fit index = 0.925, and root mean square error of approximation = 0.085. The correlation coefficients were 0.43 (p reliability and validity for assessing community integration for people with schizophrenia in Japan.

  7. The validation of a measure of organisational energy in the South African context

    Directory of Open Access Journals (Sweden)

    Lynne Derman

    2011-09-01

    Research purpose: The purpose of this research was to validate a measure of organisational energy in the South African context and to investigate whether there are differences in organisational energy as perceived by employees based on their demographic characteristics and lifestyle variables. Motivation for the study: Managing energy in organisations is important as it drives motivation, powers teamwork, fosters creativity and gives organisations a competitive edge (Schiuma, Mason & Kennerley, 2007. Limited empirical research currently exists on the phenomenon of energy in organisations. Research design/approach method: The researchers used a cross-sectional survey design, with a convenience sample (N = 520 of employees in a South African financial institution. The researchers administered the EnergyScapes Profile. Main findings: Exploratory factor analysis resulted in a one-factor structure for the EnergyScapes Profile. The scale, labelled organisational energy, showed acceptable internal consistency. The researchers found statistically significant differences in the organisational energy levels of employees based on age, tenure, geographical region, relaxation, hypertension and diabetes, depression or psychosis. Practical/managerial implications: The research provides valuable insight for practicing managers about understanding the concept of organisational energy and encourages leaders to question the energy of their employees. Contribution/value-add: The insight the researchers gained by studying the concept of organisational energy contributed in a unique way and showed the importance of considering organisations as dynamic and interactive with the people that work for them.

  8. The Myotonometer: Not a Valid Measurement Tool for Active Hamstring Musculotendinous Stiffness.

    Science.gov (United States)

    Pamukoff, Derek N; Bell, Sarah E; Ryan, Eric D; Blackburn, J Troy

    2016-05-01

    Hamstring musculotendinous stiffness (MTS) is associated with lower-extremity injury risk (ie, hamstring strain, anterior cruciate ligament injury) and is commonly assessed using the damped oscillatory technique. However, despite a preponderance of studies that measure MTS reliably in laboratory settings, there are no valid clinical measurement tools. A valid clinical measurement technique is needed to assess MTS and permit identification of individuals at heightened risk of injury and track rehabilitation progress. To determine the validity and reliability of the Myotonometer for measuring active hamstring MTS. Descriptive laboratory study. Laboratory. 33 healthy participants (15 men, age 21.33 ± 2.94 y, height 172.03 ± 16.36 cm, mass 74.21 ± 16.36 kg). Hamstring MTS was assessed using the damped oscillatory technique and the Myotonometer. Intraclass correlations were used to determine the intrasession, intersession, and interrater reliability of the Myotonometer. Criterion validity was assessed via Pearson product-moment correlation between MTS measures obtained from the Myotonometer and from the damped oscillatory technique. The Myotonometer demonstrated good intrasession (ICC3,1 = .807) and interrater reliability (ICC2,k = .830) and moderate intersession reliability (ICC2,k = .693). However, it did not provide a valid measurement of MTS compared with the damped oscillatory technique (r = .346, P = .061). The Myotonometer does not provide a valid measure of active hamstring MTS. Although the Myotonometer does not measure active MTS, it possesses good reliability and portability and could be used clinically to measure tissue compliance, muscle tone, or spasticity associated with multiple musculoskeletal disorders. Future research should focus on portable and clinically applicable tools to measure active hamstring MTS in efforts to prevent and monitor injuries.

  9. Review and evaluation of performance measures for survival prediction models in external validation settings

    Directory of Open Access Journals (Sweden)

    M. Shafiqur Rahman

    2017-04-01

    Full Text Available Abstract Background When developing a prediction model for survival data it is essential to validate its performance in external validation settings using appropriate performance measures. Although a number of such measures have been proposed, there is only limited guidance regarding their use in the context of model validation. This paper reviewed and evaluated a wide range of performance measures to provide some guidelines for their use in practice. Methods An extensive simulation study based on two clinical datasets was conducted to investigate the performance of the measures in external validation settings. Measures were selected from categories that assess the overall performance, discrimination and calibration of a survival prediction model. Some of these have been modified to allow their use with validation data, and a case study is provided to describe how these measures can be estimated in practice. The measures were evaluated with respect to their robustness to censoring and ease of interpretation. All measures are implemented, or are straightforward to implement, in statistical software. Results Most of the performance measures were reasonably robust to moderate levels of censoring. One exception was Harrell’s concordance measure which tended to increase as censoring increased. Conclusions We recommend that Uno’s concordance measure is used to quantify concordance when there are moderate levels of censoring. Alternatively, Gönen and Heller’s measure could be considered, especially if censoring is very high, but we suggest that the prediction model is re-calibrated first. We also recommend that Royston’s D is routinely reported to assess discrimination since it has an appealing interpretation. The calibration slope is useful for both internal and external validation settings and recommended to report routinely. Our recommendation would be to use any of the predictive accuracy measures and provide the corresponding predictive

  10. Reliability and Validity of a Newly Developed Measure of Citizenship Among Persons with Mental Illnesses.

    Science.gov (United States)

    O'Connell, Maria J; Clayton, Ashley; Rowe, Michael

    2017-04-01

    Following development of a 46-item of measure citizenship, a framework for supporting the full membership in society of persons with mental illness, this study tested the measure's reliability and validity. 110 persons from a mental health center completed a questionnaire packet containing the citizenship measure and other measures to assess internal consistency and validity of the citizenship instrument. Correlation matrices were examined for associations between the citizenship instrument and other measures. Stepwise regression examines demographic factors, sense of community, and social capital as predictors of citizenship, recovery, and well-being. Analyses revealed that the measure is psychometrically sound. The measure captures subjective information about the degree to which individuals experience rights, sense of belonging, and other factors associated with community membership that have been previously difficult to assess. The measure establishes a platform for interventions to support the full participation in society of persons with mental illnesses.

  11. Solar Sail Models and Test Measurements Correspondence for Validation Requirements Definition

    Science.gov (United States)

    Ewing, Anthony; Adams, Charles

    2004-01-01

    Solar sails are being developed as a mission-enabling technology in support of future NASA science missions. Current efforts have advanced solar sail technology sufficient to justify a flight validation program. A primary objective of this activity is to test and validate solar sail models that are currently under development so that they may be used with confidence in future science mission development (e.g., scalable to larger sails). Both system and model validation requirements must be defined early in the program to guide design cycles and to ensure that relevant and sufficient test data will be obtained to conduct model validation to the level required. A process of model identification, model input/output documentation, model sensitivity analyses, and test measurement correspondence is required so that decisions can be made to satisfy validation requirements within program constraints.

  12. Validation of a pediatric caregiver diary to measure symptoms of postacute respiratory syncytial virus bronchiolitis

    DEFF Research Database (Denmark)

    Santanello, Nancy C; Norquist, Josephine M; Nelsen, Linda M

    2005-01-01

    consistent, supporting a unidimensional scale structure. Test-retest reliabilities for the percentage of SFD and CSS were above the recommended cut point of 0.70. Cross-sectional and longitudinal correlations were sizeable and statistically significant, demonstrating construct validity. Hypothesized known......Acute respiratory syncytial virus (RSV)-induced bronchiolitis is often associated with continuing respiratory symptoms following hospitalization. To date, there is no validated objective measure to evaluate symptoms of RSV-induced bronchiolitis. We report on the reliability, validity...... the 4-week treatment period of the reported prospective, placebo-controlled trial of montelukast for treatment of postacute RSV were used to assess reliability (internal consistency and test-retest), construct validity (cross-sectional and longitudinal correlations), discriminant validity (known...

  13. The Lifespan Self-Esteem Scale: Initial Validation of a New Measure of Global Self-Esteem.

    Science.gov (United States)

    Harris, Michelle A; Donnellan, M Brent; Trzesniewski, Kali H

    2018-01-01

    This article introduces the Lifespan Self-Esteem Scale (LSE), a short measure of global self-esteem suitable for populations drawn from across the lifespan. Many existing measures of global self-esteem cannot be used across multiple developmental periods due to changes in item content, response formats, and other scale characteristics. This creates a need for a new lifespan scale so that changes in global self-esteem over time can be studied without confounding maturational changes with alterations in the measure. The LSE is a 4-item measure with a 5-point response format using items inspired by established self-esteem scales. The scale is essentially unidimensional and internally consistent, and it converges with existing self-esteem measures across ages 5 to 93 (N = 2,714). Thus, the LSE appears to be a useful measure of global self-esteem suitable for use across the lifespan as well as contexts where a short measure is desirable, such as populations with short attention spans or large projects assessing multiple constructs. Moreover, the LSE is one of the first global self-esteem scales to be validated for children younger than age 8, which provides the opportunity to broaden the field to include research on early formation and development of global self-esteem, an area that has previously been limited.

  14. Knowing Every Child: Validation of the Holistic Student Assessment (HSA) as a Measure of Social-Emotional Development.

    Science.gov (United States)

    Malti, Tina; Zuffianò, Antonio; Noam, Gil G

    2018-04-01

    Knowing every child's social-emotional development is important as it can support prevention and intervention approaches to meet the developmental needs and strengths of children. Here, we discuss the role of social-emotional assessment tools in planning, implementing, and evaluating preventative strategies to promote mental health in all children and adolescents. We, first, selectively review existing tools and identify current gaps in the measurement literature. Next, we introduce the Holistic Student Assessment (HSA), a tool that is based in our social-emotional developmental theory, The Clover Model, and designed to measure social-emotional development in children and adolescents. Using a sample of 5946 students (51% boys, M age  = 13.16 years), we provide evidence for the psychometric validity of the self-report version of the HSA. First, we document the theoretically expected 7-dimension factor structure in a calibration sub-sample (n = 984) and cross-validate its structure in a validation sub-sample (n = 4962). Next, we show measurement invariance across development, i.e., late childhood (9- to 11-year-olds), early adolescence (12- to 14-year-olds), and middle adolescence (15- to 18-year-olds), and evidence for the HSA's construct validity in each age group. The findings support the robustness of the factor structure and confirm its developmental sensitivity. Structural equation modeling validity analysis in a multiple-group framework indicates that the HSA is associated with mental health in expected directions across ages. Overall, these findings show the psychometric properties of the tool, and we discuss how social-emotional tools such as the HSA can guide future research and inform large-scale dissemination of preventive strategies.

  15. On the dimensionality of organizational justice: a construct validation of a measure.

    Science.gov (United States)

    Colquitt, J A

    2001-06-01

    This study explores the dimensionality of organizational justice and provides evidence of construct validity for a new justice measure. Items for this measure were generated by strictly following the seminal works in the justice literature. The measure was then validated in 2 separate studies. Study 1 occurred in a university setting, and Study 2 occurred in a field setting using employees in an automobile parts manufacturing company. Confirmatory factor analyses supported a 4-factor structure to the measure, with distributive, procedural, interpersonal, and informational justice as distinct dimensions. This solution fit the data significantly better than a 2- or 3-factor solution using larger interactional or procedural dimensions. Structural equation modeling also demonstrated predictive validity for the justice dimensions on important outcomes, including leader evaluation, rule compliance, commitment, and helping behavior.

  16. Design and Implementation Content Validity Study: Development of an instrument for measuring Patient-Centered Communication

    Directory of Open Access Journals (Sweden)

    Vahid Zamanzadeh

    2015-06-01

    Full Text Available ABSTRACT Introduction: The importance of content validity in the instrument psychometric and its relevance with reliability, have made it an essential step in the instrument development. This article attempts to give an overview of the content validity process and to explain the complexity of this process by introducing an example. Methods: We carried out a methodological study conducted to examine the content validity of the patient-centered communication instrument through a two-step process (development and judgment. At the first step, domain determination, sampling (item generation and instrument formation and at the second step, content validity ratio, content validity index and modified kappa statistic was performed. Suggestions of expert panel and item impact scores are used to examine the instrument face validity. Results: From a set of 188 items, content validity process identified seven dimensions includes trust building (eight items, informational support (seven items, emotional support (five items, problem solving (seven items, patient activation (10 items, intimacy/friendship (six items and spirituality strengthening (14 items. Content validity study revealed that this instrument enjoys an appropriate level of content validity. The overall content validity index of the instrument using universal agreement approach was low; however, it can be advocated with respect to the high number of content experts that makes consensus difficult and high value of the S-CVI with the average approach, which was equal to 0.93. Conclusion: This article illustrates acceptable quantities indices for content validity a new instrument and outlines them during design and psychometrics of patient-centered communication measuring instrument.

  17. Initial development and preliminary validation of a new negative symptom measure: the Clinical Assessment Interview for Negative Symptoms (CAINS).

    Science.gov (United States)

    Forbes, Courtney; Blanchard, Jack J; Bennett, Melanie; Horan, William P; Kring, Ann; Gur, Raquel

    2010-12-01

    As part of an ongoing scale development process, this study provides an initial examination of the psychometric properties and validity of a new interview-based negative symptom instrument, the Clinical Assessment Interview for Negative Symptoms (CAINS), in outpatients with schizophrenia or schizoaffective disorder (N = 37). The scale was designed to address limitations of existing measures and to comprehensively assess five consensus-based negative symptoms: asociality, avolition, anhedonia (consummatory and anticipatory), affective flattening, and alogia. Results indicated satisfactory internal consistency reliability for the total CAINS scale score and promising inter-rater agreement, with clear areas identified in need of improvement. Convergent validity was evident in general agreement between the CAINS and alternative negative symptom measures. Further, CAINS subscales significantly correlated with relevant self-report emotional experience measures as well as with social functioning. Discriminant validity of the CAINS was strongly supported by its small, non-significant relations with positive symptoms, general psychiatric symptoms, and depression. These preliminary data on an early beta-version of the CAINS provide initial support for this new assessment approach to negative symptoms and suggest directions for further scale development. Copyright © 2010 Elsevier B.V. All rights reserved.

  18. Validation of an instrument to measure quality of life in British children with inflammatory bowel disease.

    Science.gov (United States)

    Ogden, C A; Akobeng, A K; Abbott, J; Aggett, P; Sood, M R; Thomas, A G

    2011-09-01

    To validate IMPACT-III (UK), a health-related quality of life (HRQoL) instrument, in British children with inflammatory bowel disease (IBD). One hundred six children and parents were invited to participate. IMPACT-III (UK) was validated by inspection by health professionals and children to assess face and content validity, factor analysis to determine optimum domain structure, use of Cronbach alpha coefficients to test internal reliability, ANOVA to assess discriminant validity, correlation with the Child Health Questionnaire to assess concurrent validity, and use of intraclass correlation coefficients to assess test-retest reliability. The independent samples t test was used to measure differences between sexes and age groups, and between paper and computerised versions of IMPACT-III (UK). IMPACT-III (UK) had good face and content validity. The most robust factor solution was a 5-domain structure: body image, embarrassment, energy, IBD symptoms, and worries/concerns about IBD, all of which demonstrated good internal reliability (α = 0.74-0.88). Discriminant validity was demonstrated by significant (P  measure HRQoL in British children with IBD.

  19. Model-based wear measurements in total knee arthroplasty : development and validation of novel radiographic techniques

    NARCIS (Netherlands)

    IJsseldijk, van E.A.

    2016-01-01

    The primary aim of this work was to develop novel model-based mJSW measurement methods using a 3D reconstruction and compare the accuracy and precision of these methods to conventional mJSW measurement. This thesis contributed to the development, validation and clinical application of model-based

  20. Reliability and Validity of Finger Strength and Endurance Measurements in Rock Climbing

    Science.gov (United States)

    Michailov, Michail Lubomirov; Baláš, Jirí; Tanev, Stoyan Kolev; Andonov, Hristo Stoyanov; Kodejška, Jan; Brown, Lee

    2018-01-01

    Purpose: An advanced system for the assessment of climbing-specific performance was developed and used to: (a) investigate the effect of arm fixation (AF) on construct validity evidence and reliability of climbing-specific finger-strength measurement; (b) assess reliability of finger-strength and endurance measurements; and (c) evaluate the…

  1. Testing the Validity of the Uses and Gratifications Measures: Do They Work?

    Science.gov (United States)

    Sherer, Michael D.; Ervin, R. Ferrell

    Based on data gathered in a larger study of audience response to the debates held during the 1976 campaign for the presidency of the United States, a study examined the validity of uses and gratifications measures and explored how these measures were affected by differing levels of audience media activity. The data was drawn from telephone…

  2. Development and validation of a survey instrument to measure children's advertising literacy

    NARCIS (Netherlands)

    Rozendaal, E.; Opree, S.J.; Buijzen, M.A.

    2016-01-01

    The aim of this study was to develop and validate a survey measurement instrument for children's advertising literacy. Based on the multidimensional conceptualization of advertising literacy by 0056"> Rozendaal, Lapierre, Van Reijmersdal, and Buijzen (2011), 39 items were created to measure two

  3. On the Validity of Working Memory Measures for Elementary School Children.

    Science.gov (United States)

    Morra, Sergio; Scopesi, Alda

    The literature on the measurement of working memory is discussed, with emphasis on the validity of such measurement with elementary school students. Approaches by J. Pascual-Leone, R. Case, A. D. Baddeley, and C. Hulme are considered. An experimental study is presented, in which 100 boys and 91 girls (aged from 6 years to 10 years 11 months) were…

  4. The validity of owner-reported property cost as a measure of ...

    African Journals Online (AJOL)

    The paucity of objective indicators of property values is pervasive in developing countries. This necessitates the use of proxy measures. However, there are huge gaps in knowledge on the validity of such measures. The main objective of the study reported here is to contribute to efforts aimed at closing these gaps. It does so ...

  5. Measuring Constructs in Family Science: How Can Item Response Theory Improve Precision and Validity?

    Science.gov (United States)

    Gordon, Rachel A.

    2015-01-01

    This article provides family scientists with an understanding of contemporary measurement perspectives and the ways in which item response theory (IRT) can be used to develop measures with desired evidence of precision and validity for research uses. The article offers a nontechnical introduction to some key features of IRT, including its…

  6. Validity and interobserver agreement of reagent strips for measurement of glucosuria

    NARCIS (Netherlands)

    Bekhof, Jolita; Kollen, Boudewijn J.; Groot-Jebbink, Liesbeth J. M.; Deiman, Corrie; Van de Leur, Sjef J. C. M.; Van Straaten, Henrica L. M.

    Background. Measurement of glucosuria by means of a visually readable reagent test strip is frequently used in a wide variety of clinical settings. The aim of this study was to evaluate the validity and reliability of this semi-quantitative measurement of glucosuria compared to laboratory

  7. Development of a youth-report measure of DPN symptoms: Conceptualization and content validation

    Directory of Open Access Journals (Sweden)

    Joanne Moser

    2017-09-01

    Conclusions: This study is the first to generate a content valid self-report measure of youth’s lived experiences with DPN that uses developmentally appropriate terminology. With further psychometric testing, the measure could be used to advance research on pediatric DPN and enhance clinicians’ capacity to identify the condition in childhood.

  8. Connectedness among Taiwanese Middle School Students: A Validation Study of the Hemingway Measure of Adolescent Connectedness.

    Science.gov (United States)

    Karcher, Michael J.; Lee, Yun

    2002-01-01

    Examines the psychometric properties of the Hemingway Measure of Adolescent Connectedness among 320 Taiwanese junior high school students. Finds that connectedness measure subscales and composite scales demonstrated acceptable reliability and concurrent validity. Also finds, among other things, that girls report more connectedness to school than…

  9. Development, validity and reliability of the food allergy independent measure (FAIM)

    NARCIS (Netherlands)

    van der Velde, J. L.; Flokstra-de Blok, B. M. J.; Vlieg-Boerstra, B. J.; Oude Elberink, J. N. G.; DunnGalvin, A.; Hourihane, J. O.'B.; Duiverman, E. J.; Dubois, A. E. J.

    2010-01-01

    The Food Allergy Quality of Life Questionnaire-Child Form, -Teenager Form and -Adult Form (FAQLQ-CF, -TF and -AF) have recently been developed. To measure construct validity in the FAQLQs, a suitable independent measure was needed with which FAQLQ scores could be correlated. However, in food

  10. Development, validity and reliability of the food allergy independent measure (FAIM)

    NARCIS (Netherlands)

    van der Velde, J. L.; Flokstra-de Blok, B. M. J.; Vlieg - Boerstra, B. J.; Oude Elberink, J. N. G.; DunnGalvin, A.; Hourihane, J. O'B.; Duiverman, E. J.; Dubois, A. E. J.

    Background: The Food Allergy Quality of Life Questionnaire-Child Form, -Teenager Form and -Adult Form (FAQLQ-CF, -TF and -AF) have recently been developed. To measure construct validity in the FAQLQs, a suitable independent measure was needed with which FAQLQ scores could be correlated. However, in

  11. Ultrasound as an Outcome Measure in Gout. A Validation Process by the OMERACT Ultrasound Working Group

    DEFF Research Database (Denmark)

    Terslev, Lene; Gutierrez, Marwin; Schmidt, Wolfgang A

    2015-01-01

    OBJECTIVE: To summarize the work performed by the Outcome Measures in Rheumatology (OMERACT) Ultrasound (US) Working Group on the validation of US as a potential outcome measure in gout. METHODS: Based on the lack of definitions, highlighted in a recent literature review on US as an outcome tool...

  12. Validation of streamflow measurements made with M9 and RiverRay acoustic Doppler current profilers

    Science.gov (United States)

    Boldt, Justin A.; Oberg, Kevin A.

    2015-01-01

    The U.S. Geological Survey (USGS) Office of Surface Water (OSW) previously validated the use of Teledyne RD Instruments (TRDI) Rio Grande (in 2007), StreamPro (in 2006), and Broadband (in 1996) acoustic Doppler current profilers (ADCPs) for streamflow (discharge) measurements made by the USGS. Two new ADCPs, the SonTek M9 and the TRDI RiverRay, were first used in the USGS Water Mission Area programs in 2009. Since 2009, the OSW and USGS Water Science Centers (WSCs) have been conducting field measurements as part of their stream-gaging program using these ADCPs. The purpose of this paper is to document the results of USGS OSW analyses for validation of M9 and RiverRay ADCP streamflow measurements. The OSW required each participating WSC to make comparison measurements over the range of operating conditions in which the instruments were used until sufficient measurements were available. The performance of these ADCPs was evaluated for validation and to identify any present and potential problems. Statistical analyses of streamflow measurements indicate that measurements made with the SonTek M9 ADCP using firmware 2.00–3.00 or the TRDI RiverRay ADCP using firmware 44.12–44.15 are unbiased, and therefore, can continue to be used to make streamflow measurements in the USGS stream-gaging program. However, for the M9 ADCP, there are some important issues to be considered in making future measurements. Possible future work may include additional validation of streamflow measurements made with these instruments from other locations in the United States and measurement validation using updated firmware and software.

  13. Determining Reliability and Validity of the Persian Version of Software Usability Measurements Inventory (SUMI) Questionnaire

    OpenAIRE

    seyed abolfazl zakerian; Roya Azizi; Mehdi Rahgozar

    2013-01-01

    The term usability refers to a special index for success of an operating system. This study aimed to determine the reliability and validity of the Software Usability Measurements Inventory (SUMI) questionnaire as one of the valid and common questionnaires about usability evaluation. The back translation method was used to translate the questionnaire from English to Persian back to English. Moreover, repeatability or test-retest reliability was practically used to determine the reliability of ...

  14. Reliability and validity of advanced theory-of-mind measures in middle childhood and adolescence.

    Science.gov (United States)

    Hayward, Elizabeth O; Homer, Bruce D

    2017-09-01

    Although theory-of-mind (ToM) development is well documented for early childhood, there is increasing research investigating changes in ToM reasoning in middle childhood and adolescence. However, the psychometric properties of most advanced ToM measures for use with older children and adolescents have not been firmly established. We report on the reliability and validity of widely used, conventional measures of advanced ToM with this age group. Notable issues with both reliability and validity of several of the measures were evident in the findings. With regard to construct validity, results do not reveal a clear empirical commonality between tasks, and, after accounting for comprehension, developmental trends were evident in only one of the tasks investigated. Statement of contribution What is already known on this subject? Second-order false belief tasks have acceptable internal consistency. The Eyes Test has poor internal consistency. Validity of advanced theory-of-mind tasks is often based on the ability to distinguish clinical from typical groups. What does this study add? This study examines internal consistency across six widely used advanced theory-of-mind tasks. It investigates validity of tasks based on comprehension of items by typically developing individuals. It further assesses construct validity, or commonality between tasks. © 2017 The British Psychological Society.

  15. Development and Validation of Measures of Secondary Science Teachers' PCK for Teaching Photosynthesis

    Science.gov (United States)

    Park, Soonhye; Suh, Jeekyung; Seo, Kyungwoon

    2017-04-01

    This paper describes procedures by which two types of measures of Pedagogical Content Knowledge (PCK) were developed and validated: (a) PCK Survey and (b) PCK Rubric. Given the topic-specificity of PCK, the measures centered on photosynthesis as taught in high school classrooms. The measures were conceptually grounded in the pentagon model of PCK and designed to measure indispensable PCK that can be applied to any teacher, in any teaching context, for the given topic. Because of the exploratory nature of the study, the measures focus on two key components of PCK: (a) knowledge of students' understanding in science and (b) knowledge of instructional strategies and representations. Both measures have established acceptable levels of reliability as determined by internal consistency and inter-rater agreement. Evidence related to content validity was gathered through expert consultations, while evidence related to construct validity was collected through analysis of think-aloud interviews and factor analyses. Issues and challenges emerging from the course of the measure development, administration, and validation are discussed with strategies for confronting them. Directions for future research are proposed in three areas: (a) relationships between PCK and teaching experiences, (b) differences in PCK between science teachers and scientists, and (c) relationships between PCK and student learning.

  16. Development and Validation of Measures of Secondary Science Teachers' PCK for Teaching Photosynthesis

    Science.gov (United States)

    Park, Soonhye; Suh, Jeekyung; Seo, Kyungwoon

    2018-06-01

    This paper describes procedures by which two types of measures of Pedagogical Content Knowledge (PCK) were developed and validated: (a) PCK Survey and (b) PCK Rubric. Given the topic-specificity of PCK, the measures centered on photosynthesis as taught in high school classrooms. The measures were conceptually grounded in the pentagon model of PCK and designed to measure indispensable PCK that can be applied to any teacher, in any teaching context, for the given topic. Because of the exploratory nature of the study, the measures focus on two key components of PCK: (a) knowledge of students' understanding in science and (b) knowledge of instructional strategies and representations. Both measures have established acceptable levels of reliability as determined by internal consistency and inter-rater agreement. Evidence related to content validity was gathered through expert consultations, while evidence related to construct validity was collected through analysis of think-aloud interviews and factor analyses. Issues and challenges emerging from the course of the measure development, administration, and validation are discussed with strategies for confronting them. Directions for future research are proposed in three areas: (a) relationships between PCK and teaching experiences, (b) differences in PCK between science teachers and scientists, and (c) relationships between PCK and student learning.

  17. Patients' and observers' perceptions of involvement differ. Validation study on inter-relating measures for shared decision making.

    Science.gov (United States)

    Kasper, Jürgen; Heesen, Christoph; Köpke, Sascha; Fulcher, Gary; Geiger, Friedemann

    2011-01-01

    Patient involvement into medical decisions as conceived in the shared decision making method (SDM) is essential in evidence based medicine. However, it is not conclusively evident how best to define, realize and evaluate involvement to enable patients making informed choices. We aimed at investigating the ability of four measures to indicate patient involvement. While use and reporting of these instruments might imply wide overlap regarding the addressed constructs this assumption seems questionable with respect to the diversity of the perspectives from which the assessments are administered. The study investigated a nested cohort (N = 79) of a randomized trial evaluating a patient decision aid on immunotherapy for multiple sclerosis. Convergent validities were calculated between observer ratings of videotaped physician-patient consultations (OPTION) and patients' perceptions of the communication (Shared Decision Making Questionnaire, Control Preference Scale & Decisional Conflict Scale). OPTION reliability was high to excellent. Communication performance was low according to OPTION and high according to the three patient administered measures. No correlations were found between observer and patient judges, neither for means nor for single items. Patient report measures showed some moderate correlations. Existing SDM measures do not refer to a single construct. A gold standard is missing to decide whether any of these measures has the potential to indicate patient involvement. Pronounced heterogeneity of the underpinning constructs implies difficulties regarding the interpretation of existing evidence on the efficacy of SDM. Consideration of communication theory and basic definitions of SDM would recommend an inter-subjective focus of measurement. Controlled-Trials.com ISRCTN25267500.

  18. Family-centred services in the Netherlands : validating a self-report measure for paediatric service providers

    NARCIS (Netherlands)

    Siebes, RC; Ketelaar, M; Wijnroks, L; van Schie, PE; Nijhuis, Bianca J G; Vermeer, A; Gorter, JW

    Objective: To validate the Dutch translation of the Canadian Measure of Processes of Care for Service Providers questionnaire (MPOC-SP) for use in paediatric rehabilitation settings in the Netherlands. Design: The construct validity, content validity, face validity, and reliability of the Dutch

  19. Validity of plant fiber length measurement : a review of fiber length measurement based on kenaf as a model

    Science.gov (United States)

    James S. Han; Theodore. Mianowski; Yi-yu. Lin

    1999-01-01

    The efficacy of fiber length measurement techniques such as digitizing, the Kajaani procedure, and NIH Image are compared in order to determine the optimal tool. Kenaf bast fibers, aspen, and red pine fibers were collected from different anatomical parts, and the fiber lengths were compared using various analytical tools. A statistical analysis on the validity of the...

  20. Validity of a parent-report measure of vocabulary and grammar for Spanish-speaking toddlers.

    Science.gov (United States)

    Thal, D; Jackson-Maldonado, D; Acosta, D

    2000-10-01

    The validity of the Fundación MacArthur Inventario del Desarrollo de Habilidades Comunicativas: Palabras y Enunciados (IDHC:PE) was examined with twenty 20- and nineteen 28-month-old, typically developing, monolingual, Spanish-speaking children living in Mexico. One measure of vocabulary (number of words) and two measures of grammar (mean of the three longest utterances and grammatical complexity score) from the IDHC:PE were compared to behavioral measures of vocabulary (number of different words from a language sample and number of objects named in a confrontation naming task) and one behavioral measure of grammar (mean length of utterance from a language sample). Only vocabulary measures were assessed in the 20-month-olds because of floor effects on the grammar measures. Results indicated validity for assessing expressive vocabulary in 20-month-olds and expressive vocabulary and grammar in 28-month-olds.

  1. Non-destructive measurements of nuclear wastes. Validation and industrial operating experience

    International Nuclear Information System (INIS)

    Saas, A.; Tchemitciieff, E.

    1993-01-01

    After a short survey of the means employed for the non-destructive measurement of specific activities (γ and X-ray) in waste packages and raw waste, the performances of the device and the ANDRA requirements are presented. The validation of the γ and X-ray measurements on packages is obtained through determining, by destructive means, the same activity on coring samples. The same procedure is used for validating the homogeneity measurements on packages (either homogeneous or heterogeneous). Different operating experiences are then exposed for several kinds of packages and waste. Up to now, about twenty different types of packages have been examined and more than 200 packages have allowed the calibration, validation, and control

  2. Validating Machine Learning Algorithms for Twitter Data Against Established Measures of Suicidality.

    Science.gov (United States)

    Braithwaite, Scott R; Giraud-Carrier, Christophe; West, Josh; Barnes, Michael D; Hanson, Carl Lee

    2016-05-16

    One of the leading causes of death in the United States (US) is suicide and new methods of assessment are needed to track its risk in real time. Our objective is to validate the use of machine learning algorithms for Twitter data against empirically validated measures of suicidality in the US population. Using a machine learning algorithm, the Twitter feeds of 135 Mechanical Turk (MTurk) participants were compared with validated, self-report measures of suicide risk. Our findings show that people who are at high suicidal risk can be easily differentiated from those who are not by machine learning algorithms, which accurately identify the clinically significant suicidal rate in 92% of cases (sensitivity: 53%, specificity: 97%, positive predictive value: 75%, negative predictive value: 93%). Machine learning algorithms are efficient in differentiating people who are at a suicidal risk from those who are not. Evidence for suicidality can be measured in nonclinical populations using social media data.

  3. Validation of the high performance leadership competencies as measured by an assessment centre in-basket

    Directory of Open Access Journals (Sweden)

    H. H. Spangenberg

    2003-10-01

    Full Text Available The purpose of this study was to validate Schroder’s High Performance Leadership Competencies (HPLCs, measured by a specially designed In-basket, against multiple criteria. These consisted of six measures of managerial success, representing managerial advancement and salary progress criteria, and a newly developed comprehensive measure of work unit performance, the Performance Index. An environmental dynamism and complexity questionnaire served as moderator variable. Results indicated disappointing predictive validity quotients for the HPLCs as measured by an In-basket, in contrast to satisfactory predictive and construct validity obtained in previous studies by means of a full assessment centre. The implications of the findings are discussed and suggestions are made for improving the validity of the In-basket. Opsomming Die doel van hierdie studie was die validering van Schroder se Hoëvlak Leierskapsbevoegdhede, gemeet deur ‘n spesiaal ontwerpte Posmandjie, teen veelvoudige kriteria. Dit behels ses metings van bestuursukses wat bestuursbevorderings- en salarisvorderingskriteria insluit, sowel as ‘n nuutontwikkelde, omvattende meting van werkeenheidsprestasie, die Prestasie indeks. ‘n Vraelys wat die dinamika en kompleksiteit van die omgewing meet, het as moderator veranderlike gedien. Resultate dui op teleurstellende geldigheidskwosiënte vir die Hoëvlak Leierskapsbevoegdhede soos gemeet deur ‘n posmandjie, in teenstelling met bevredigende voorspellings- en konstrukgeldigheid wat in vorige studies deur middel van ‘n volle takseersentrum verkry is. Die bevindinge word bespreek en voorstelle word gemaak om die geldigheidskwosiënte te verbeter.

  4. The bogus taste test: Validity as a measure of laboratory food intake

    OpenAIRE

    Robinson, Eric; Haynes, Ashleigh; Hardman, Charlotte A.; Kemps, Eva; Higgs, Suzanne; Jones, Andrew

    2017-01-01

    Because overconsumption of food contributes to ill health, understanding what affects how much people eat is of importance. The ?bogus? taste test is a measure widely used in eating behaviour research to identify factors that may have a causal effect on food intake. However, there has been no examination of the validity of the bogus taste test as a measure of food intake. We conducted a participant level analysis of 31 published laboratory studies that used the taste test to measure food inta...

  5. Development and validation of the Treatment Related Impact Measure of Weight (TRIM-Weight

    Directory of Open Access Journals (Sweden)

    Lessard Suzanne

    2010-02-01

    Full Text Available Abstract Background The use of prescription anti-obesity medication (AOM is becoming increasingly common as treatment options grow and become more accessible. However, AOM may not be without a wide range of potentially negative impacts on patient functioning and well being. The Treatment Related Impact Measure (TRIM-Weight is an obesity treatment-specific patient reported outcomes (PRO measure designed to assess the key impacts of prescription anti-obesity medication. This paper will present the validation findings for the TRIM-Weight. Methods The online validation battery survey was administered in four countries (the U.S., U.K., Australia, and Canada. Eligible subjects were over age eighteen, currently taking a prescription AOM and were currently or had been obese during their life. Validation analyses were conducted according to an a priori statistical analysis plan. Item level psychometric and conceptual criteria were used to refine and reduce the preliminary item pool and factor analysis to identify structural domains was performed. Reliability and validity testing was then performed and the minimally importance difference (MID explored. Results Two hundred and eight subjects completed the survey. Twenty-one of the 43 items were dropped and a five-factor structure was achieved: Daily Life, Weight Management, Treatment Burden, Experience of Side Effects, and Psychological Health. A-priori criteria for internal consistency and test-retest coefficients for the total score and all five subscales were met. All pre-specified hypotheses for convergent and known group validity were also met with the exception of the domain of Daily Life (proven in an ad hoc analysis as well as the 1/2 standard deviation threshold for the MID. Conclusion The development and validation of the TRIM-Weight has been conducted according to well-defined principles for the creation of a PRO measure. Based on the evidence to date, the TRIM-Weight can be considered a brief

  6. ADHD in girls and boys – gender differences in co-existing symptoms and executive function measures

    OpenAIRE

    Skogli, Erik Winther; Teicher, Martin H; Andersen, Per Normann; Hovik, Kjell Tore; Øie, Merete

    2013-01-01

    Background: ADHD is diagnosed and treated more often in males than in females. Research on gender differences suggests that girls may be consistently underidentified and underdiagnosed because of differences in the expression of the disorder among boys and girls. One aim of the present study was to assess in a clinical sample of medication naïve boys and girls with ADHD, whether there were significant gender x diagnosis interactions in co-existing symptom severity and executive function (EF) ...

  7. A pilot study to validate measures of the theory of reasoned action for organ donation behavior.

    Science.gov (United States)

    Wong, Shui Hung; Chow, Amy Yin Man

    2018-04-01

    The present study aimed at taking the first attempt in validating the measures generated based on the theory of reasoned action (TRA). A total of 211 university students participated in the study, 95 were included in the exploratory factor analysis and 116 were included in the confirmatory factor analysis. The TRA measurements were established with adequate psychometric properties, internal consistency, and construct validity. Findings also suggested that attitude toward organ donation has both a cognitive and affective nature, while the subjective norm of the family seems to be important to students' views on organ donation.

  8. Existing buildings

    DEFF Research Database (Denmark)

    Gram-Hanssen, Kirsten

    2014-01-01

    their homes. These policy measures include building regulations, energy tax and different types of incentives and information dissemination. The conclusion calls for new and innovative policy measures to cope with the realities of renovations of owner-occupied houses and how energy efficiency improvement...

  9. Design, validation, and reliability of survey to measure female athlete triad knowledge among coaches

    Directory of Open Access Journals (Sweden)

    Jillian E. Frideres

    2015-06-01

    Full Text Available The purpose of this study was to design and to test the validity and reliability of an instrument to evaluate coaches' knowledge about the female athlete triad syndrome and their confidence in this knowledge. The instrument collects information regarding: knowledge of the syndrome, components, prevention and intervention; confidence of the coaches in their answers; and coach's characteristics (gender, degree held, years of experience in coaching females, continuing education participation specific to the syndrome and its components, and sport coached. The process of designing the questionnaire and testing the validity and reliability of it was done in four phases: a design and development of the instrument, b content validity, c instrument reliability, and d concurrent validity. The results show that the instrument is suitable for measuring coaches' female athlete triad knowledge. The instrument can contribute to assessing the coaches' knowledge level in relation to this topic.

  10. Performance Validity Testing in Neuropsychology: Methods for Measurement Development and Maximizing Diagnostic Accuracy.

    Science.gov (United States)

    Wodushek, Thomas R; Greher, Michael R

    2017-05-01

    In the first column in this 2-part series, Performance Validity Testing in Neuropsychology: Scientific Basis and Clinical Application-A Brief Review, the authors introduced performance validity tests (PVTs) and their function, provided a justification for why they are necessary, traced their ongoing endorsement by neuropsychological organizations, and described how they are used and interpreted by ever increasing numbers of clinical neuropsychologists. To enhance readers' understanding of these measures, this second column briefly describes common detection strategies used in PVTs as well as the typical methods used to validate new PVTs and determine cut scores for valid/invalid determinations. We provide a discussion of the latest research demonstrating how neuropsychologists can combine multiple PVTs in a single battery to improve sensitivity/specificity to invalid responding. Finally, we discuss future directions for the research and application of PVTs.

  11. Attitudes Toward Transgender Men and Women: Development and Validation of a New Measure

    Directory of Open Access Journals (Sweden)

    Thomas J Billard

    2018-04-01

    Full Text Available A series of three studies were conducted to generate, develop, and validate the Attitudes toward Transgender Men and Women (ATTMW scale. In Study 1, 120 American adults responded to an open-ended questionnaire probing various dimensions of their perceptions of transgender individuals and identity. Qualitative thematic analysis generated 200 items based on their responses. In Study 2, 238 American adults completed a questionnaire consisting of the generated items. Exploratory factor analysis (EFA revealed two non-identical 12-item subscales (ATTM and ATTW of the full 24-item scale. In Study 3, 150 undergraduate students completed a survey containing the ATTMW and a number of validity-testing variables. Confirmatory factor analysis (CFA verified the single-factor structures of the ATTM and ATTW subscales, and the convergent, discriminant, predictive, and concurrent validities of the ATTMW were also established. Together, our results demonstrate that the ATTMW is a reliable and valid measure of attitudes toward transgender individuals.

  12. Use of the color trails test as an embedded measure of performance validity.

    Science.gov (United States)

    Henry, George K; Algina, James

    2013-01-01

    One hundred personal injury litigants and disability claimants referred for a forensic neuropsychological evaluation were administered both portions of the Color Trails Test (CTT) as part of a more comprehensive battery of standardized tests. Subjects who failed two or more free-standing tests of cognitive performance validity formed the Failed Performance Validity (FPV) group, while subjects who passed all free-standing performance validity measures were assigned to the Passed Performance Validity (PPV) group. A cutscore of ≥45 seconds to complete Color Trails 1 (CT1) was associated with a classification accuracy of 78%, good sensitivity (66%) and high specificity (90%), while a cutscore of ≥84 seconds to complete Color Trails 2 (CT2) was associated with a classification accuracy of 82%, good sensitivity (74%) and high specificity (90%). A CT1 cutscore of ≥58 seconds, and a CT2 cutscore ≥100 seconds was associated with 100% positive predictive power at base rates from 20 to 50%.

  13. The validity and reliability of the Functional Strength Measurement (FSM) in children with intellectual disabilities.

    Science.gov (United States)

    Aertssen, W F M; Steenbergen, B; Smits-Engelsman, B C M

    2018-06-07

    There is lack of valid and reliable field-based tests for assessing functional strength in young children with mild intellectual disabilities (IDs). The aim of this study was to investigate the test-retest reliability and construct validity of the Functional Strength Measurement in children with ID (FSM-ID). Fifty-two children with mild ID (40 boys and 12 girls, mean age 8.48 years, SD = 1.48) were tested with the FSM. Test-retest reliability (n = 32) was examined by a two-way interclass correlation coefficient for agreement (ICC 2.1A). Standard error of measurement and smallest detectable change were calculated. Construct validity was determined by calculating correlations between the FSM-ID and handheld dynamometry (HHD) (convergent validity), FSM-ID, FSM-ID and subtest strength of the Bruininks-Oseretsky test of motor proficiency - second edition (BOT-2) (convergent validity) and the FSM-ID and balance subtest of the BOT-2 (discriminant validity). Test-retest reliability ICC ranged 0.89-0.98. Correlation between the items of the FSM-ID and HHD ranged 0.39-0.79 and between FSM-ID and BOT-2 (strength items) 0.41-0.80. Correlation between items of the FSM-ID and BOT-2 (balance items) ranged 0.41-0.70. The FSM-ID showed good test-retest reliability and good convergent validity with the HHD and BOT-2 subtest strength. The correlations assessing discriminant validity were higher than expected. Poor levels of postural control and core stability in children with mild IDs may be the underlying factor of those higher correlations. © 2018 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

  14. Ovarian and cervical cancer awareness: development of two validated measurement tools.

    Science.gov (United States)

    Simon, Alice E; Wardle, Jane; Grimmett, Chloe; Power, Emily; Corker, Elizabeth; Menon, Usha; Matheson, Lauren; Waller, Jo

    2012-07-01

    The aim of the study was to develop and validate measures of awareness of symptoms and risk factors for ovarian and cervical cancer (Ovarian and Cervical Cancer Awareness Measures). Potentially relevant items were extracted from the literature and generated by experts. Four validation studies were carried out to establish reliability and validity. Women aged 21-67 years (n=146) and ovarian and cervical cancer experts (n=32) were included in the studies. Internal reliability was assessed psychometrically. Test-retest reliability was assessed over a 1-week interval. To establish construct validity, Cancer Awareness Measure (CAM) scores of cancer experts were compared with equally well-educated comparison groups. Sensitivity to change was tested by randomly assigning participants to read either a leaflet giving information about ovarian/cervical cancer or a leaflet with control information, and then completing the ovarian/cervical CAM. Internal reliability (Cronbach's α=0.88 for the ovarian CAM and α=0.84 for the cervical CAM) and test-retest reliability (r=0.84 and r=0.77 for the ovarian and cervical CAMs, respectively) were both high. Validity was demonstrated with cancer experts achieving higher scores than controls [ovarian CAM: t(36)= -5.6, pcancer leaflet scored higher than those who received a control leaflet [ovarian CAM: t(49)=7.5, pcancer awareness in the general population.

  15. Measuring patient activation in The Netherlands: translation and validation of the American short form Patient Activation Measure (PAM13).

    Science.gov (United States)

    Rademakers, Jany; Nijman, Jessica; van der Hoek, Lucas; Heijmans, Monique; Rijken, Mieke

    2012-07-31

    The American short form Patient Activation Measure (PAM) is a 13-item instrument which assesses patient (or consumer) self-reported knowledge, skills and confidence for self-management of one's health or chronic condition. In this study the PAM was translated into a Dutch version; psychometric properties of the Dutch version were established and the instrument was validated in a panel of chronically ill patients. The translation was done according to WHO guidelines. The PAM 13-Dutch was sent to 4178 members of the Dutch National Panel of people with Chronic illness or Disability (NPCD) in April 2010 (study A) and again to a sub sample of this group (N = 973) in June 2010 (study B). Internal consistency, test-retest reliability and cross-validation with the SBSQ-D (a measure for Health literacy) were computed. The Dutch results were compared to similar Danish and American data. The psychometric properties of the PAM 13-Dutch were generally good. The level of internal consistency is good (α = 0.88) and item-rest correlations are moderate to strong. The Dutch mean PAM score (61.3) is comparable to the American (61.9) and lower than the Danish (64.2). The test-retest reliability was moderate. The association with Health literacy was weak to moderate. The PAM-13 Dutch is a reliable instrument to measure patient activation. More research is needed into the validity of the Patient Activation Measure, especially with respect to a more comprehensive measure of Health literacy.

  16. A Prospective Validation Study of a Rainbow Model of Integrated Care Measurement Tool in Singapore.

    Science.gov (United States)

    Nurjono, Milawaty; Valentijn, Pim P; Bautista, Mary Ann C; Wei, Lim Yee; Vrijhoef, Hubertus Johannes Maria

    2016-04-08

    The conceptual ambiguity of the integrated care concept precludes a full understanding of what constitutes a well-integrated health system, posing a significant challenge in measuring the level of integrated care. Most available measures have been developed from a disease-specific perspective and only measure certain aspects of integrated care. Based on the Rainbow Model of Integrated Care, which provides a detailed description of the complex concept of integrated care, a measurement tool has been developed to assess integrated care within a care system as a whole gathered from healthcare providers' and managerial perspectives. This paper describes the methodology of a study seeking to validate the Rainbow Model of Integrated Care measurement tool within and across the Singapore Regional Health System. The Singapore Regional Health System is a recent national strategy developed to provide a better-integrated health system to deliver seamless and person-focused care to patients through a network of providers within a specified geographical region. The validation process includes the assessment of the content of the measure and its psychometric properties. If the measure is deemed to be valid, the study will provide the first opportunity to measure integrated care within Singapore Regional Health System with the results allowing insights in making recommendations for improving the Regional Health System and supporting international comparison.

  17. Development And Validation Of An Organisational Justice Measurement Instrument For A South African Context

    Directory of Open Access Journals (Sweden)

    Ophillia Ledimo

    2015-03-01

    Full Text Available Measuring organisational justice in a South African context is a concern as the concept is multi-dimensional and there is no comprehensive definition; therefore, an integrative and well-developed measure of organisational justice can advance the measurement and analysis of this concept. This study investigates the development and validity of an organisational justice measuring instrument (OJMI, and determines the relationships between the different dimensions of the concept organisational justice. Data was gathered from 289 participants, employed in a public service organisation. To analyse the data the descriptive and inferential statistics used are Cronbach alpha coefficient, means, the explanatory factor analysis (EFA and the confirmatory factor analysis (CFA. It was found that the model fitted the data well and the measurement of each dimension, namely strategic direction; distributive, procedural, interactional, informational, diversity management; customer relations; service delivery innovation as well as ethical leadership and management justice were confirmed to be statistically significant and positive. These results indicate that OJMI is a reliable and valid measure that organisations need in order to measure perceptions of fairness, and to monitor trends of fair practices. The validated measuring instrument for organisational justice and the conducted analysis of the interrelationships between the different dimensions of the concept will enable organisations to initiate proactive and reactive interventions to facilitate justice and fair practices.

  18. The reward probability index: design and validation of a scale measuring access to environmental reward.

    Science.gov (United States)

    Carvalho, John P; Gawrysiak, Michael J; Hellmuth, Julianne C; McNulty, James K; Magidson, Jessica F; Lejuez, C W; Hopko, Derek R

    2011-06-01

    Behavioral models of depression implicate decreased response-contingent positive reinforcement (RCPR) as critical toward the development and maintenance of depression (Lewinsohn, 1974). Given the absence of a psychometrically sound self-report measure of RCPR, the Reward Probability Index (RPI) was developed to measure access to environmental reward and to approximate actual RCPR. In Study 1 (n=269), exploratory factor analysis supported a 20-item two-factor model (Reward Probability, Environmental Suppressors) with strong internal consistency (α=.90). In Study 2 (n=281), confirmatory factor analysis supported this two-factor structure and convergent validity was established through strong correlations between the RPI and measures of activity, avoidance, reinforcement, and depression (r=.65 to .81). Discriminant validity was supported via smaller correlations between the RPI and measures of social support and somatic anxiety (r=-.29 to -.40). Two-week test-retest reliability was strong (r=.69). In Study 3 (n=33), controlling for depression symptoms, hierarchical regression supported the incremental validity of the RPI in predicting daily diary reports of environmental reward. The RPI represents a parsimonious, reliable, and valid measure that may facilitate understanding of the etiology of depression and its relationship to overt behaviors. Copyright © 2011. Published by Elsevier Ltd.

  19. What are validated self-report adherence scales really measuring?: a systematic review.

    Science.gov (United States)

    Nguyen, Thi-My-Uyen; La Caze, Adam; Cottrell, Neil

    2014-03-01

    Medication non-adherence is a significant health problem. There are numerous methods for measuring adherence, but no single method performs well on all criteria. The purpose of this systematic review is to (i) identify self-report medication adherence scales that have been correlated with comparison measures of medication-taking behaviour, (ii) assess how these scales measure adherence and (iii) explore how these adherence scales have been validated. Cinahl and PubMed databases were used to search articles written in English on the development or validation of medication adherence scales dating to August 2012. The search terms used were medication adherence, medication non-adherence, medication compliance and names of each scale. Data such as barriers identified and validation comparison measures were extracted and compared. Sixty articles were included in the review, which consisted of 43 adherence scales. Adherence scales include items that either elicit information regarding the patient's medication-taking behaviour and/or attempts to identify barriers to good medication-taking behaviour or beliefs associated with adherence. The validation strategies employed depended on whether the focus of the scale was to measure medication-taking behaviour or identify barriers or beliefs. Supporting patients to be adherent requires information on their medication-taking behaviour, barriers to adherence and beliefs about medicines. Adherence scales have the potential to explore these aspects of adherence, but currently there has been a greater focus on measuring medication-taking behaviour. Selecting the 'right' adherence scale(s) requires consideration of what needs to be measured and how (and in whom) the scale has been validated. © 2013 The British Pharmacological Society.

  20. The development and validation of measures to assess cooking skills and food skills.

    Science.gov (United States)

    Lavelle, Fiona; McGowan, Laura; Hollywood, Lynsey; Surgenor, Dawn; McCloat, Amanda; Mooney, Elaine; Caraher, Martin; Raats, Monique; Dean, Moira

    2017-09-02

    With the increase use of convenience food and eating outside the home environment being linked to the obesity epidemic, the need to assess and monitor individuals cooking and food skills is key to help intervene where necessary to promote the usage of these skills. Therefore, this research aimed to develop and validate a measure for cooking skills and one for food skills, that are clearly described, relatable, user-friendly, suitable for different types of studies, and applicable across all sociodemographic levels. Two measures were developed in light of the literature and expert opinion and piloted for clarity and ease of use. Following this, four studies were undertaken across different cohorts (including a sample of students, both 'Food preparation novices' and 'Experienced food preparers', and a nationally representative sample) to assess temporal stability, psychometrics, internal consistency reliability and construct validity of both measures. Analysis included T-tests, Pearson's correlations, factor analysis, and Cronbach's alphas, with a significance level of 0.05. Both measures were found to have a significant level of temporal stability (P cooking skills confidence measure ranged from 0.78 to 0.93 across all cohorts. The food skills confidence measure's Cronbach's alpha's ranged from 0.85 to 0.94. The two measures also showed a high discriminate validity as there were significant differences (P cooking skills confidence and P cooking skills confidence measure and the food skills confidence measure have been shown to have a very satisfactory reliability, validity and are consistent over time. Their user-friendly applicability make both measures highly suitable for large scale cross-sectional, longitudinal and intervention studies to assess or monitor cooking and food skills levels and confidence.

  1. A Community Based Study to Test the Reliability and Validity of Physical Activity Measurement Techniques

    Directory of Open Access Journals (Sweden)

    Puneet Misra

    2014-01-01

    Full Text Available Introduction: Physical activity (PA is protective against non-communicable diseases and it can reduce premature mortality. However, it is difficult to assess the frequency, duration, type and intensity of PA. The global physical activity questionnaire (GPAQ has been developed by World Health Organization with the aim of having valid and reliable estimates of PA. The primary aim of this study is to assess the repeatability of the GPAQ instrument and the secondary aim is to validate it against International Physical Activity Questionnaire (IPAQ and against an objective measure of PA (i.e., using pedometers in both rural and peri-urban areas of North India. Methods: A total of 262 subjects were recruited by random selection from Ballabgarh Block of Haryana State in India. For test retest repeatability of GPAQ and IPAQ, the instruments were administered on two occasions separated by at least 3 days. For concurrent validity, both questionnaires were administered in random order and for criterion validity step counters were used. Spearman′s correlation coefficient, intra-class correlation (ICC and Cohen′s kappa was used in the analysis. Results: For GPAQ validity, the spearman′s Rho ranged from 0.40 to 0.59 and ICC ranged from 0.43 to 0.81 while for IPAQ validity, spearman correlation coefficient ranged from 0.42 to 0.43 and ICC ranged from 0.56 to 0.68. The observed concurrent validity coefficients suggested that both the questionnaires had reasonable agreement (Spearman Rho of >0.90; P < 0.0001; ICC: 0.76-0.91, P < 0.05. Conclusions: GPAQ is similar to IPAQ in measuring PA and can be used for measurement of PA in community settings.

  2. The Importance of and the Complexities Associated With Measuring Continuity of Care During Resident Training: Possible Solutions Do Exist.

    Science.gov (United States)

    Carney, Patricia A; Conry, Colleen M; Mitchell, Karen B; Ericson, Annie; Dickinson, W Perry; Martin, James C; Carek, Peter J; Douglass, Alan B; Eiff, M Patrice

    2016-04-01

    Evolutions in care delivery toward the patient-centered medical home have influenced important aspects of care continuity. Primary responsibility for a panel of continuity patients is a foundational requirement in family medicine residencies. In this paper we characterize challenges in measuring continuity of care in residency training in this new era of primary care. We synthesized the literature and analyzed information from key informant interviews and group discussions with residency faculty and staff to identify the challenges and possible solutions for measuring continuity of care during family medicine training. We specifically focused on measuring interpersonal continuity at the patient level, resident level, and health care team level. Challenges identified in accurately measuring interpersonal continuity of care during residency training include: (1) variability in empanelment approaches for all patients, (2) scheduling complexity in different types of visits, (3) variability in ability to attain continuity counts at the level of the resident, and (4) shifting make-up of health care teams, especially in residency training. Possible solutions for each challenge are presented. Philosophical issues related to continuity are discussed, including whether true continuity can be achieved during residency training and whether qualitative rather than quantitative measures of continuity are better suited to residencies. Measuring continuity of care in residency training is challenging but possible, though improvements in precision and assessment of the comprehensive nature of the relationships are needed. Definitions of continuity during training and the role continuity measurement plays in residency need further study.

  3. Towards unified performance measures for evaluating nuclear safeguard systems: mathematical foundations and formal comparison of existing models

    International Nuclear Information System (INIS)

    Corynen, G.C.

    1979-01-01

    An important step in the analysis of large-scale systems is the development of economical and meaningful measures of system performance. In the literature on analysis of nuclear safeguard systems, many performance measures have been advanced, but their interrelationships and their relevance to overall system objectives have not received attention commensurate with the effort spent in developing detailed safeguard models. The work reported here is an attempt to improve the development and evaluation of performance measures for nuclear safeguard systems. This work falls into three main areas. First, we develop a new framework which provides an initial basis for defining and structuring performance measures. To demonstrate that this framework allows a clear understanding of the purposes of nuclear safeguard systems, we employ it to state various safeguard questions clearly and concisely. The framework reflects the rough subsystem structure of safeguard systems - the detection and response subsystems - and formally accommodates various safeguard models. We especially emphasize two of these models which are under development at Lawrence Livermore Laboratory, the structured assessment approach (SAA) and the systems vulnerability assessment method (SVAM). Second, we examine some performance measures presently used in the nuclear safeguards area and in reliability theory in general. Some of these we accept and modify to obtain system performance measures that are an additive combination of subsystem performance measures, a very convenient form indeed. Others we reject as impractical and meaningless. Finally, we determine some common features between the SAA and SVAM models by formally comparing these models in our framework

  4. The Sensed Presence Questionnaire (SenPQ: initial psychometric validation of a measure of the “Sensed Presence” experience

    Directory of Open Access Journals (Sweden)

    Joseph M. Barnby

    2017-03-01

    Full Text Available Background The experience of ‘sensed presence’—a feeling or sense that another entity, individual or being is present despite no clear sensory or perceptual evidence—is known to occur in the general population, appears more frequently in religious or spiritual contexts, and seems to be prominent in certain psychiatric or neurological conditions and may reflect specific functions of social cognition or body-image representation systems in the brain. Previous research has relied on ad-hoc measures of the experience and no specific psychometric scale to measure the experience exists to date. Methods Based on phenomenological description in the literature, we created the 16-item Sensed Presence Questionnaire (SenPQ. We recruited participants from (i a general population sample, and; (ii a sample including specific selection for religious affiliation, to complete the SenPQ and additional measures of well-being, schizotypy, social anxiety, social imagery, and spiritual experience. We completed an analysis to test internal reliability, the ability of the SenPQ to distinguish between religious and non-religious participants, and whether the SenPQ was specifically related to positive schizotypical experiences and social imagery. A factor analysis was also conducted to examine underlying latent variables. Results The SenPQ was found to be reliable and valid, with religious participants significantly endorsing more items than non-religious participants, and the scale showing a selective relationship with construct relevant measures. Principal components analysis indicates two potential underlying factors interpreted as reflecting ‘benign’ and ‘malign’ sensed presence experiences. Discussion The SenPQ appears to be a reliable and valid measure of sensed presence experience although further validation in neurological and psychiatric conditions is warranted.

  5. Preliminary Validation of a New Measure of Negative Response Bias: The Temporal Memory Sequence Test.

    Science.gov (United States)

    Hegedish, Omer; Kivilis, Naama; Hoofien, Dan

    2015-01-01

    The Temporal Memory Sequence Test (TMST) is a new measure of negative response bias (NRB) that was developed to enrich the forced-choice paradigm. The TMST does not resemble the common structure of forced-choice tests and is presented as a temporal recall memory test. The validation sample consisted of 81 participants: 21 healthy control participants, 20 coached simulators, and 40 patients with acquired brain injury (ABI). The TMST had high reliability and significantly high positive correlations with the Test of Memory Malingering and Word Memory Test effort scales. Moreover, the TMST effort scales exhibited high negative correlations with the Glasgow Coma Scale, thus validating the previously reported association between probable malingering and mild traumatic brain injury. A suggested cutoff score yielded acceptable classification rates in the ABI group as well as in the simulator and control groups. The TMST appears to be a promising measure of NRB detection, with respectable rates of reliability and construct and criterion validity.

  6. Construct validity of adolescents' self-reported big five personality traits: importance of conceptual breadth and initial validation of a short measure.

    Science.gov (United States)

    Morizot, Julien

    2014-10-01

    While there are a number of short personality trait measures that have been validated for use with adults, few are specifically validated for use with adolescents. To trust such measures, it must be demonstrated that they have adequate construct validity. According to the view of construct validity as a unifying form of validity requiring the integration of different complementary sources of information, this article reports the evaluation of content, factor, convergent, and criterion validities as well as reliability of adolescents' self-reported personality traits. Moreover, this study sought to address an inherent potential limitation of short personality trait measures, namely their limited conceptual breadth. In this study, starting with items from a known measure, after the language-level was adjusted for use with adolescents, items tapping fundamental primary traits were added to determine the impact of added conceptual breadth on the psychometric properties of the scales. The resulting new measure was named the Big Five Personality Trait Short Questionnaire (BFPTSQ). A group of expert judges considered the items to have adequate content validity. Using data from a community sample of early adolescents, the results confirmed the factor validity of the Big Five structure in adolescence as well as its measurement invariance across genders. More important, the added items did improve the convergent and criterion validities of the scales, but did not negatively affect their reliability. This study supports the construct validity of adolescents' self-reported personality traits and points to the importance of conceptual breadth in short personality measures. © The Author(s) 2014.

  7. Perceived Organizational Justice in Care Services: creation and multi-sample validation of a measure.

    Science.gov (United States)

    Pérez-Arechaederra, Diana; Briones, Elena; Lind, Allan; García-Ortiz, Luis

    2014-02-01

    Organizational justice (OJ) perceptions predict attitudes and behaviors of customers and employees across a broad range of services. Although OJ has proven predictive power and relevance, it has rarely been studied in health care settings. This stems partially from the lack of a reliable and valid measure of patients' OJ in health care encounters. The objective here was to create and validate a measure of patients' OJ. With that purpose, a survey study with two sampling contexts - the U.S. and Spain - was carried out in order to provide a cross-national validation of the scale in two versions: English (Perceived Organizational Justice in Care Services, PJustCS) and Spanish (Percepción de Justicia Organizacional en el Ámbito Sanitario, PJustAS). Exploratory Factor Analysis (EFA) and Confirmatory Factor Analysis (CFA) were used to select the appropriate items in the final version of the instrument. Reliability and validity of the measure were tested. A total of 406 patients in the U.S. and 473 patients in Spain participated. The measures used were the newly created scale of Perceived Organizational Justice in Care Services (PJustCS/PJustAS) and scales of patients' Satisfaction, Trust and Global Justice. Factor Analyses supported the four dimensional structure of the instrument for each group. Multigroup CFA substantiated invariant factor loadings and invariant structural models across both samples, hence, supporting that the instrument is applicable in its two versions: English and Spanish. Validation results showed expected positive relations of OJ with patients' satisfaction, trust in clinicians and global perceived justice. These results point out the importance of health care customers' perceived organizational justice in the explanation of health care dynamics. The scale has desirable psychometric properties and shows adequate validity, contributing to the potential development of the area. Copyright © 2013 Elsevier Ltd. All rights reserved.

  8. Validity of a Scale to Measure Teachers' Attitudes towards Sex Education

    Science.gov (United States)

    de Almeida Reis, Maria Helena; Vilar, Duarte Goncalo Rei

    2006-01-01

    Despite the current legislation requiring sex education as part of the school curriculum in Portugal, great obstacles to its implementation remain. Furthermore, sex education is far from being systematically administered. Thus, the main interest in our project was to validate a scale that measures teachers' attitudes towards sex education. There…

  9. Novel monorail infusion catheter for volumetric coronary blood flow measurement in humans: in vitro validation

    NARCIS (Netherlands)

    van 't Veer, M.; Adjedj, J.; Wijnbergen, I.; Tóth, G.G.; Rutten, M.C.M.; Barbato, E.; van Nunen, L.X.; Pijls, N.H.J.; de Bruyne, B.

    2016-01-01

    AIMS: The aim of this study is to validate a novel monorail infusion catheter for thermodilution-based quantitative coronary flow measurements. METHODS AND RESULTS: Based on the principles of thermodilution, volumetric coronary flow can be determined from the flow rate of a continuous saline

  10. Validity Evidence for the Measurement of the Strength of Motivation for Medical School

    Science.gov (United States)

    Kusurkar, Rashmi; Croiset, Gerda; Kruitwagen, Cas; ten Cate, Olle

    2011-01-01

    The Strength of Motivation for Medical School (SMMS) questionnaire is designed to determine the strength of motivation of students particularly for medical study. This research was performed to establish the validity evidence for measuring strength of motivation for medical school. Internal structure and relations to other variables were used as…

  11. Measuring Students' Motivation: Validity Evidence for the MUSIC Model of Academic Motivation Inventory

    Science.gov (United States)

    Jones, Brett D.; Skaggs, Gary

    2016-01-01

    This study provides validity evidence for the MUSIC Model of Academic Motivation Inventory (MUSIC Inventory; Jones, 2012), which measures college students' beliefs related to the five components of the MUSIC Model of Motivation (MUSIC model; Jones, 2009). The MUSIC model is a conceptual framework for five categories of teaching strategies (i.e.,…

  12. Parent-reported social support for child’s fruit and vegetable intake: validity of measures

    Science.gov (United States)

    The objective of our study was to develop and validate measures of parental social support to increase their child’s fruit and vegetable (FV) consumption. We used a cross-sectional study design by studying participants at school and home. We studied two hundred three parents with at least 1 elemen...

  13. Validation of the instrument IMAQE-Food to measure effectiveness of food quality management

    NARCIS (Netherlands)

    Spiegel, van der M.; Boer, de W.J.; Luning, P.A.; Ziggers, G.W.; Jongen, W.M.F.

    2007-01-01

    Purpose - The purpose of this paper is to show that manufacturers use several quality assurance systems to assure quality. This paper aims to describe the validation of IMAQE-Food - an instrument that measures effectiveness of food quality systems. Design/methodology/approach - Generalisability,

  14. Memory Complaint Questionnaire performed poorly as screening tool : validation against psychometric tests and affective measures

    NARCIS (Netherlands)

    Reid, Meagan; Parkinson, Lynne; Gibson, Richard; Schofield, Peter; D'Este, Catherine; Attia, John; Tavener, Meredith; Byles, Julie

    Objective: This study examined the internal and external validity of the Memory Complaint Questionnaire (MAC-Q), a brief measure of subjective memory complaint in people with normal cognitive function. Study Design and Setting: The Study of Health Outcomes in Aircraft Maintenance Personnel was a

  15. Validating a Measure of Stages of Change in Career Development

    Science.gov (United States)

    Hammond, Marie S.; Michael, Tony; Luke, Charles

    2017-01-01

    Research on the processes of change in career development has focused on developmental stages rather than processes. This manuscript reports on the development and validation of the stages of change-career development scale, adapted from McConnaughy, Prochaska, & Velicer (1983) measure of stages of change in psychotherapy. Data from 875…

  16. Validation of the Automated Method VIENA: An Accurate, Precise, and Robust Measure of Ventricular Enlargement

    NARCIS (Netherlands)

    Vrenken, H.; Vos, E.K.; van der Flier, W.M.; Sluimer, I.C.; Cover, K.S.; Knol, D.L.; Barkhof, F.

    2014-01-01

    Background: In many retrospective studies and large clinical trials, high-resolution, good-contrast 3DT1 images are unavailable, hampering detailed analysis of brain atrophy. Ventricular enlargement then provides a sensitive indirect measure of ongoing central brain atrophy. Validated automated

  17. The Interpersonal Measure of Psychopathy: Construct and Incremental Validity in Male Prisoners

    Science.gov (United States)

    Zolondek, Stacey; Lilienfeld, Scott O.; Patrick, Christopher J.; Fowler, Katherine A.

    2006-01-01

    The authors examined the construct and incremental validity of the Interpersonal Measure of Psychopathy (IM-P), a relatively new instrument designed to detect interpersonal behaviors associated with psychopathy. Observers of videotaped Psychopathy Checklist-Revised (PCL-R) interviews rated male prisoners (N = 93) on the IM-P. The IM-P correlated…

  18. Children's Assertive Behavior: The Reliability and Validity of Three Self-Report Measures.

    Science.gov (United States)

    Scanlon, Elizabeth M.; Ollendick, Thomas H.

    1985-01-01

    The internal consistency and validity of three new scales for measuring assertiveness in children were tested. Two of the scales were able to "unbind" aggressive from assertive behavior, while the third was able to "unbind" submissive from assertive behavior. At present, a combination of the three scales is recommended. (KH)

  19. Development and Validation of Instruments to Measure Learning of Expert-Like Thinking

    Science.gov (United States)

    Adams, Wendy K.; Wieman, Carl E.

    2011-01-01

    This paper describes the process for creating and validating an assessment test that measures the effectiveness of instruction by probing how well that instruction causes students in a class to think like experts about specific areas of science. The design principles and process are laid out and it is shown how these align with professional…

  20. Dynamic radar cross section measurements of a full-scale aircraft for RCS modelling validation

    CSIR Research Space (South Africa)

    Van Schalkwyk, Richard F

    2017-10-01

    Full Text Available In this paper the process followed in generating a high fidelity reference data set for radar cross section (RCS) modelling validation for a full-scale aircraft, is presented. An overview of two dynamic RCS measurement campaigns, involving both...

  1. New Multiple-Choice Measures of Historical Thinking: An Investigation of Cognitive Validity

    Science.gov (United States)

    Smith, Mark D.

    2018-01-01

    History education scholars have recognized the need for test validity research in recent years and have called for empirical studies that explore how to best measure historical thinking processes. The present study was designed to help answer this call and to provide a model that others can adapt to carry this line of research forward. It employed…

  2. Establishing Reliability and Construct Validity for an Instrument to Measure Environmental Connectedness

    Science.gov (United States)

    Beery, Thomas H.

    2013-01-01

    The purpose of this preliminary study is to establish a reliable and valid measure of environmental connectedness (EC) to allow for further exploration of the Swedish Outdoor Recreation in Change national survey data. The Nordic concept of friluftsliv (nature-based outdoor recreation) and the environmental psychology concept of EC are explored to…

  3. Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

    Science.gov (United States)

    Hall, William J.

    2016-01-01

    This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability…

  4. Reproducibility and validity of video screen measurements of gait in children with spastic cerebral palsy.

    NARCIS (Netherlands)

    Grunt, S.; van Kampen, P.M.; van der Krogt, M.M.; Brehm, M.A.; Doorenbosch, C.A.M.; Becher, J.G.

    2010-01-01

    Purpose: To determine the reproducibility and validity of video screen measurement (VSM) of sagittal plane joint angles during gait. Methods: 17 children with spastic cerebral palsy walked on a 10. m walkway. Videos were recorded and 3d-instrumented gait analysis was performed. Two investigators

  5. Reproducibility and validity of video screen measurements of gait in children with spastic cerebral palsy

    NARCIS (Netherlands)

    Grunt, Sebastian; van Kampen, Petra J.; van der Krogt, Marjolein M.; Brehm, Merel-Anne; Doorenbosch, Caroline A. M.; Becher, Jules G.

    2010-01-01

    PURPOSE: To determine the reproducibility and validity of video screen measurement (VSM) of sagittal plane joint angles during gait. METHODS: 17 children with spastic cerebral palsy walked on a 10m walkway. Videos were recorded and 3d-instrumented gait analysis was performed. Two investigators

  6. The Deaf Acculturation Scale (DAS): Development and Validation of a 58-Item Measure

    Science.gov (United States)

    Maxwell-McCaw, Deborah; Zea, Maria Cecilia

    2011-01-01

    This study involved the development and validation of the Deaf Acculturation Scale (DAS), a new measure of cultural identity for Deaf and hard-of-hearing (hh) populations. Data for this study were collected online and involved a nation-wide sample of 3,070 deaf/hh individuals. Results indicated strong internal reliabilities for all the subscales,…

  7. Measuring Social Anxiety in 11 Countries Development and Validation of the Social Anxiety Questionnaire for Adults

    NARCIS (Netherlands)

    Caballo, V.E.; Salazar, I.C.; Irurtia, M.J.; Arias, B.; Hofmann, S.G.

    2010-01-01

    This paper reports on two studies conducted to develop and validate a new self-report measure of social phobia/anxiety - the Social Anxiety Questionnaire for Adults (SAQ-A) (Cuestionario de ansiedad social para adultos, CASO-A). A diary-item recording procedure was used to generate the initial pool

  8. Validation of the Adolescent Concerns Measure (ACM): Evidence from Exploratory and Confirmatory Factor Analysis

    Science.gov (United States)

    Ang, Rebecca P.; Chong, Wan Har; Huan, Vivien S.; Yeo, Lay See

    2007-01-01

    This article reports the development and initial validation of scores obtained from the Adolescent Concerns Measure (ACM), a scale which assesses concerns of Asian adolescent students. In Study 1, findings from exploratory factor analysis using 619 adolescents suggested a 24-item scale with four correlated factors--Family Concerns (9 items), Peer…

  9. Assessing College Student-Athletes' Life Stress: Initial Measurement Development and Validation

    Science.gov (United States)

    Lu, Frank Jing-Horng; Hsu, Ya-Wen; Chan, Yuan-Shuo; Cheen, Jang-Rong; Kao, Kuei-Tsu

    2012-01-01

    College student-athletes have unique life stress that warrants close attention. The purpose of this study was to develop a reliable and valid measurement assessing college student-athletes' life stress. In Study 1, a focus group discussion and Delphi method produced a questionnaire draft, termed the College Student-Athletes' Life Stress Scale. In…

  10. Measurement and data analysis methods for field-scale wind erosion studies and model validation

    NARCIS (Netherlands)

    Zobeck, T.M.; Sterk, G.; Funk, R.F.; Rajot, J.L.; Stout, J.E.; Scott Van Pelt, R.

    2003-01-01

    Accurate and reliable methods of measuring windblown sediment are needed to confirm, validate, and improve erosion models, assess the intensity of aeolian processes and related damage, determine the source of pollutants, and for other applications. This paper outlines important principles to

  11. Understanding and Measuring Evaluation Capacity: A Model and Instrument Validation Study

    Science.gov (United States)

    Taylor-Ritzler, Tina; Suarez-Balcazar, Yolanda; Garcia-Iriarte, Edurne; Henry, David B.; Balcazar, Fabricio E.

    2013-01-01

    This study describes the development and validation of the Evaluation Capacity Assessment Instrument (ECAI), a measure designed to assess evaluation capacity among staff of nonprofit organizations that is based on a synthesis model of evaluation capacity. One hundred and sixty-nine staff of nonprofit organizations completed the ECAI. The 68-item…

  12. Decay heat measurement on fusion reactor materials and validation of calculation code system

    Energy Technology Data Exchange (ETDEWEB)

    Maekawa, Fujio; Ikeda, Yujiro; Wada, Masayuki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-03-01

    Decay heat rates for 32 fusion reactor relevant materials irradiated with 14-MeV neutrons were measured for the cooling time period between 1 minute and 400 days. With using the experimental data base, validity of decay heat calculation systems for fusion reactors were investigated. (author)

  13. Psychometrically and qualitatively validating a cross-national cumulative measure of fear-based xenophobia

    NARCIS (Netherlands)

    van der Veer, C.G.; Ommundsen, R.; Yakushko, O.; Higler, L.E.A.; Woelders, S.; Hagen, K.A.

    2013-01-01

    The article reports the results of a Mokken Scale Procedure (MSP) developing a hierarchical cross-national scale to measure xenophobia, and a qualitative validation of this scale. A pool of 30 xenophobic scale items were collected from several sources and edited according to established

  14. Examining the Validity of Self-Reports on Scales Measuring Students' Strategic Processing

    Science.gov (United States)

    Samuelstuen, Marit S.; Braten, Ivar

    2007-01-01

    Background: Self-report inventories trying to measure strategic processing at a global level have been much used in both basic and applied research. However, the validity of global strategy scores is open to question because such inventories assess strategy perceptions outside the context of specific task performance. Aims: The primary aim was to…

  15. Validation of the actuator line method using near wake measurements of the MEXICO rotor

    DEFF Research Database (Denmark)

    Nilsson, Karl; Shen, Wen Zhong; Sørensen, Jens Nørkær

    2015-01-01

    The purpose of the present work is to validate the capability of the actuator line method to compute vortex structures in the near wake behind the MEXICO experimental wind turbine rotor. In the MEXICO project/MexNext Annex, particle image velocimetry measurements have made it possible to determine...

  16. The Servant Leadership Survey: Development and Validation of a Multidimensional Measure

    NARCIS (Netherlands)

    D. van Dierendonck (Dirk); I.A.P.M. Nuijten (Inge)

    2011-01-01

    textabstractPurpose: The purpose of this paper is to describe the development and validation of a multi-dimensional instrument to measure servant leadership. Design/Methodology/Approach Based on an extensive literature review and expert judgment, 99 items were formulated. In three steps, using

  17. RF propagation measurement and model validation during RF/IR synergy trial vampira

    NARCIS (Netherlands)

    Heemskerk, H.J.M.

    2005-01-01

    The member nations of AC/323 SET-RTG056/RTG32 on Integration of Radar and Infrared for Ship Self Defence have performed the Validation Measurements for Propagation in the Infrared and Radar (VAMPIRA). The objective was to get insight into the radar and infrared synergy concentrated on propagation in

  18. Offshore Wind Turbine Foundation Model Validation with Wind Farm Measurements and Uncertainty Quantification

    DEFF Research Database (Denmark)

    Koukoura, Christina; Natarajan, Anand; Krogh, Thomas

    2013-01-01

    The variation in simulated monopile substructure loads is quantified by validating an aero-hydro-servo-elastic design tool with offshore foundation load measurements. A three bladed 3.6MW pitch controlled variable speed wind turbine for offshore monopile foundations is modeled in the HAWC2...

  19. Predictive Validity of Early Literacy Measures for Korean English Language Learners in the United States

    Science.gov (United States)

    Han, Jeanie Nam; Vanderwood, Michael L.; Lee, Catherine Y.

    2015-01-01

    This study examined the predictive validity of early literacy measures with first-grade Korean English language learners (ELLs) in the United States at varying levels of English proficiency. Participants were screened using Dynamic Indicators of Basic Early Literacy Skills (DIBELS) Phoneme Segmentation Fluency (PSF), DIBELS Nonsense Word Fluency…

  20. Validating an instrument for measuring brand equity of CSR driven organizations in Malaysia

    Directory of Open Access Journals (Sweden)

    Singh Dara Singh Karpal

    2017-06-01

    Full Text Available The objective of this study is to develop and propose a valid and reliable instrument to measure brand equity of CSR driven organizations in Malaysia. An instrument to measure brand equity was constructed with adaptations from two key sources, namely Yew Leh and Lee (2011 and Yoo and Donthu (2001. As such the study only focuses on the development and validation of an instrument to measure brand equity of CSR driven organizations. The usable sample population included 909 respondents from 12 states of West Malaysia which were selected using a quota sampling plan. Confirmatory factor analysis (CFA and reliability analysis were carried out to test and validate the proposed brand equity instrument containing four components (brand awareness, brand association, perceived quality and brand loyalty with a total of 13 items. Results from the CFA and reliability analysis indicated that all the items representing the four components were valid and can be used to measure the brand equity of organizations that are practicing CSR. The study tried to set an empirical basis for brand equity and CSR related research which could be used by future researchers in different industries and geographical locations. The study also implies the need for organizations to assess the success of their CSR efforts through the use of the proposed instrument in order to gauge whether all their CSR efforts translate to improved brand equity.

  1. Validating Remotely Sensed Land Surface Evapotranspiration Based on Multi-scale Field Measurements

    Science.gov (United States)

    Jia, Z.; Liu, S.; Ziwei, X.; Liang, S.

    2012-12-01

    The land surface evapotranspiration plays an important role in the surface energy balance and the water cycle. There have been significant technical and theoretical advances in our knowledge of evapotranspiration over the past two decades. Acquisition of the temporally and spatially continuous distribution of evapotranspiration using remote sensing technology has attracted the widespread attention of researchers and managers. However, remote sensing technology still has many uncertainties coming from model mechanism, model inputs, parameterization schemes, and scaling issue in the regional estimation. Achieving remotely sensed evapotranspiration (RS_ET) with confident certainty is required but difficult. As a result, it is indispensable to develop the validation methods to quantitatively assess the accuracy and error sources of the regional RS_ET estimations. This study proposes an innovative validation method based on multi-scale evapotranspiration acquired from field measurements, with the validation results including the accuracy assessment, error source analysis, and uncertainty analysis of the validation process. It is a potentially useful approach to evaluate the accuracy and analyze the spatio-temporal properties of RS_ET at both the basin and local scales, and is appropriate to validate RS_ET in diverse resolutions at different time-scales. An independent RS_ET validation using this method was presented over the Hai River Basin, China in 2002-2009 as a case study. Validation at the basin scale showed good agreements between the 1 km annual RS_ET and the validation data such as the water balanced evapotranspiration, MODIS evapotranspiration products, precipitation, and landuse types. Validation at the local scale also had good results for monthly, daily RS_ET at 30 m and 1 km resolutions, comparing to the multi-scale evapotranspiration measurements from the EC and LAS, respectively, with the footprint model over three typical landscapes. Although some

  2. Assessing anger regulation in middle childhood: development and validation of a behavioral observation measure

    Directory of Open Access Journals (Sweden)

    Helena Lara Rohlf

    2015-04-01

    Full Text Available An observational measure of anger regulation in middle childhood was developed that facilitated the in situ assessment of five maladaptive regulation strategies in response to an anger-eliciting task. 599 children aged 6-10 years (M = 8.12, SD = 0.92 participated in the study. Construct validity of the measure was examined through correlations with parent- and self-reports of anger regulation and anger reactivity. Criterion validity was established through links with teacher-rated aggression and social rejection measured by parent-, teacher-, and self-reports. The observational measure correlated significantly with parent- and self-reports of anger reactivity, whereas it was unrelated to parent- and self-reports of anger regulation. It also made a unique contribution to predicting aggression and social rejection.

  3. Validity of Multisensor Array for Measuring Energy Expenditure of an Activity Bout in Early Stroke Survivors

    Directory of Open Access Journals (Sweden)

    Sharon Flora Kramer

    2018-01-01

    Full Text Available Introduction. Stroke survivors use more energy than healthy people during activities such as walking, which has consequences for the way exercise is prescribed for stroke survivors. There is a need for wearable device that can validly measure energy expenditure (EE of activity to inform exercise prescription early after stroke. We aimed to determine the validity and reliability of the SenseWear-Armband (SWA to measure EE and step-counts during activity 0.75 for walking and sit-to-stand, respectively. However, agreement levels changed with increasing EE levels (i.e., proportional bias. The SWA did not accurately measure step-counts. Conclusion. The SWA should be used with caution to measure EE of activity of mild to moderate stroke survivors <1 month after stroke.

  4. Data Visualization and Analysis Tools for the Global Precipitation Measurement (GPM) Validation Network

    Science.gov (United States)

    Morris, Kenneth R.; Schwaller, Mathew

    2010-01-01

    The Validation Network (VN) prototype for the Global Precipitation Measurement (GPM) Mission compares data from the Tropical Rainfall Measuring Mission (TRMM) satellite Precipitation Radar (PR) to similar measurements from U.S. and international operational weather radars. This prototype is a major component of the GPM Ground Validation System (GVS). The VN provides a means for the precipitation measurement community to identify and resolve significant discrepancies between the ground radar (GR) observations and similar satellite observations. The VN prototype is based on research results and computer code described by Anagnostou et al. (2001), Bolen and Chandrasekar (2000), and Liao et al. (2001), and has previously been described by Morris, et al. (2007). Morris and Schwaller (2009) describe the PR-GR volume-matching algorithm used to create the VN match-up data set used for the comparisons. This paper describes software tools that have been developed for visualization and statistical analysis of the original and volume matched PR and GR data.

  5. Salzburger State Reactance Scale (SSR Scale): Validation of a Scale Measuring State Reactance.

    Science.gov (United States)

    Sittenthaler, Sandra; Traut-Mattausch, Eva; Steindl, Christina; Jonas, Eva

    This paper describes the construction and empirical evaluation of an instrument for measuring state reactance, the Salzburger State Reactance (SSR) Scale. The results of a confirmatory factor analysis supported a hypothesized three-factor structure: experience of reactance, aggressive behavioral intentions, and negative attitudes. Correlations with divergent and convergent measures support the validity of this structure. The SSR Subscales were strongly related to the other state reactance measures. Moreover, the SSR Subscales showed modest positive correlations with trait measures of reactance. The SSR Subscales correlated only slightly or not at all with neighboring constructs (e.g., autonomy, experience of control). The only exception was fairness scales, which showed moderate correlations with the SSR Subscales. Furthermore, a retest analysis confirmed the temporal stability of the scale. Suggestions for further validation of this questionnaire are discussed.

  6. Assessing the Validity of Single-item Life Satisfaction Measures: Results from Three Large Samples

    Science.gov (United States)

    Cheung, Felix; Lucas, Richard E.

    2014-01-01

    Purpose The present paper assessed the validity of single-item life satisfaction measures by comparing single-item measures to the Satisfaction with Life Scale (SWLS) - a more psychometrically established measure. Methods Two large samples from Washington (N=13,064) and Oregon (N=2,277) recruited by the Behavioral Risk Factor Surveillance System (BRFSS) and a representative German sample (N=1,312) recruited by the Germany Socio-Economic Panel (GSOEP) were included in the present analyses. Single-item life satisfaction measures and the SWLS were correlated with theoretically relevant variables, such as demographics, subjective health, domain satisfaction, and affect. The correlations between the two life satisfaction measures and these variables were examined to assess the construct validity of single-item life satisfaction measures. Results Consistent across three samples, single-item life satisfaction measures demonstrated substantial degree of criterion validity with the SWLS (zero-order r = 0.62 – 0.64; disattenuated r = 0.78 – 0.80). Patterns of statistical significance for correlations with theoretically relevant variables were the same across single-item measures and the SWLS. Single-item measures did not produce systematically different correlations compared to the SWLS (average difference = 0.001 – 0.005). The average absolute difference in the magnitudes of the correlations produced by single-item measures and the SWLS were very small (average absolute difference = 0.015 −0.042). Conclusions Single-item life satisfaction measures performed very similarly compared to the multiple-item SWLS. Social scientists would get virtually identical answer to substantive questions regardless of which measure they use. PMID:24890827

  7. Assessing the validity of single-item life satisfaction measures: results from three large samples.

    Science.gov (United States)

    Cheung, Felix; Lucas, Richard E

    2014-12-01

    The present paper assessed the validity of single-item life satisfaction measures by comparing single-item measures to the Satisfaction with Life Scale (SWLS)-a more psychometrically established measure. Two large samples from Washington (N = 13,064) and Oregon (N = 2,277) recruited by the Behavioral Risk Factor Surveillance System and a representative German sample (N = 1,312) recruited by the Germany Socio-Economic Panel were included in the present analyses. Single-item life satisfaction measures and the SWLS were correlated with theoretically relevant variables, such as demographics, subjective health, domain satisfaction, and affect. The correlations between the two life satisfaction measures and these variables were examined to assess the construct validity of single-item life satisfaction measures. Consistent across three samples, single-item life satisfaction measures demonstrated substantial degree of criterion validity with the SWLS (zero-order r = 0.62-0.64; disattenuated r = 0.78-0.80). Patterns of statistical significance for correlations with theoretically relevant variables were the same across single-item measures and the SWLS. Single-item measures did not produce systematically different correlations compared to the SWLS (average difference = 0.001-0.005). The average absolute difference in the magnitudes of the correlations produced by single-item measures and the SWLS was very small (average absolute difference = 0.015-0.042). Single-item life satisfaction measures performed very similarly compared to the multiple-item SWLS. Social scientists would get virtually identical answer to substantive questions regardless of which measure they use.

  8. Positive mental health literacy: development and validation of a measure among Norwegian adolescents

    Directory of Open Access Journals (Sweden)

    Hanne Nissen Bjørnsen

    2017-09-01

    Full Text Available Abstract Background Mental health literacy (MHL, or the knowledge and abilities necessary to benefit mental health, is a significant determinant of mental health and has the potential to benefit both individual and public mental health. MHL and its measures have traditionally focused on knowledge and beliefs about mental -ill-health rather than on mental health. No measures of MHL addressing knowledge of good or positive mental health have been identified. Aim: This study aimed to develop and validate an instrument measuring adolescents’ knowledge of how to obtain and maintain good mental health and to evaluate the psychometric properties of the instrument. More specifically, the factor structure, internal and construct validity, and test-retest reliability were assessed. Methods The participants were Norwegian upper secondary school students aged 15–21 years. The development and validation of the instrument entailed three phases: 1 item generation based on the basic psychological needs theory (BPNT, focus group interviews, and a narrative literature review, 2 a pilot study (n = 479, and 3 test-retest (n = 149, known-groups validity (n = 44, and scale construction, item reduction through principal component analysis (PCA, and confirmatory factor analysis (CFA for factor structure and psychometric properties assessment (n = 1888. Results Thirty-two items were initially generated, and 15 were selected for the pilot study. PCA identified cross-loadings, and a one-factor solution was examined. After removing five problematic items, CFA yielded a satisfactory fit for a 10-item one-factor model, referred to as the mental health-promoting knowledge (MHPK-10 measure. The test-retest evaluation supported the stability of the measure. McDonald’s omega was 0.84, and known-groups validity test indicated good construct validity. Conclusion A valid and reliable one-dimensional instrument measuring knowledge of factors promoting good mental

  9. Positive mental health literacy: development and validation of a measure among Norwegian adolescents.

    Science.gov (United States)

    Bjørnsen, Hanne Nissen; Eilertsen, Mary Elizabeth Bradley; Ringdal, Regine; Espnes, Geir Arild; Moksnes, Unni Karin

    2017-09-18

    Mental health literacy (MHL), or the knowledge and abilities necessary to benefit mental health, is a significant determinant of mental health and has the potential to benefit both individual and public mental health. MHL and its measures have traditionally focused on knowledge and beliefs about mental -ill-health rather than on mental health. No measures of MHL addressing knowledge of good or positive mental health have been identified. This study aimed to develop and validate an instrument measuring adolescents' knowledge of how to obtain and maintain good mental health and to evaluate the psychometric properties of the instrument. More specifically, the factor structure, internal and construct validity, and test-retest reliability were assessed. The participants were Norwegian upper secondary school students aged 15-21 years. The development and validation of the instrument entailed three phases: 1) item generation based on the basic psychological needs theory (BPNT), focus group interviews, and a narrative literature review, 2) a pilot study (n = 479), and 3) test-retest (n = 149), known-groups validity (n = 44), and scale construction, item reduction through principal component analysis (PCA), and confirmatory factor analysis (CFA) for factor structure and psychometric properties assessment (n = 1888). Thirty-two items were initially generated, and 15 were selected for the pilot study. PCA identified cross-loadings, and a one-factor solution was examined. After removing five problematic items, CFA yielded a satisfactory fit for a 10-item one-factor model, referred to as the mental health-promoting knowledge (MHPK-10) measure. The test-retest evaluation supported the stability of the measure. McDonald's omega was 0.84, and known-groups validity test indicated good construct validity. A valid and reliable one-dimensional instrument measuring knowledge of factors promoting good mental health among adolescents was developed. The instrument has the

  10. Identification of validated questionnaires to measure adherence to pharmacological antihypertensive treatments

    Directory of Open Access Journals (Sweden)

    Pérez-Escamilla B

    2015-04-01

    Full Text Available Beatriz Pérez-Escamilla,1 Lucía Franco-Trigo,1 Joanna C Moullin,2 Fernando Martínez-Martínez,1 José P García-Corpas1 1Academic Centre in Pharmaceutical Care, Faculty of Pharmacy, University of Granada, Granada, Spain; 2Graduate School of Health, Faculty of Pharmacy, University of Technology Sydney, Sydney, NSW, Australia Background: Low adherence to pharmacological treatments is one of the factors associated with poor blood pressure control. Questionnaires are an indirect measurement method that is both economic and easy to use. However, questionnaires should meet specific criteria, to minimize error and ensure reproducibility of results. Numerous studies have been conducted to design questionnaires that quantify adherence to pharmacological antihypertensive treatments. Nevertheless, it is unknown whether questionnaires fulfil the minimum requirements of validity and reliability. The aim of this study was to compile validated questionnaires measuring adherence to pharmacological antihypertensive treatments that had at least one measure of validity and one measure of reliability. Methods: A literature search was undertaken in PubMed, the Excerpta Medica Database (EMBASE, and the Latin American and Caribbean Health Sciences Literature database (Literatura Latino-Americana e do Caribe em Ciências da Saúde [LILACS]. References from included articles were hand-searched. The included papers were all that were published in English, French, Portuguese, and Spanish from the beginning of the database’s indexing until July 8, 2013, where a validation of a questionnaire (at least one demonstration of the validity and at least one of reliability was performed to measure adherence to antihypertensive pharmacological treatments. Results: A total of 234 potential papers were identified in the electronic database search; of these, 12 met the eligibility criteria. Within these 12 papers, six questionnaires were validated: the Morisky

  11. Cross-cultural validation of health literacy measurement tools in Italian oncology patients.

    Science.gov (United States)

    Zotti, Paola; Cocchi, Simone; Polesel, Jerry; Cipolat Mis, Chiara; Bragatto, Donato; Cavuto, Silvio; Conficconi, Alice; Costanzo, Carla; De Giorgi, Melissa; Drace, Christina A; Fiorini, Federica; Gangeri, Laura; Lisi, Andrea; Martino, Rosalba; Mosconi, Paola; Paradiso, Angelo; Ravaioli, Valentina; Truccolo, Ivana; De Paoli, Paolo

    2017-06-19

    The aim of this study was to assess the psychometric characteristics of four Health Literacy (HL) measurement tools, viz. Newest Vital Sign (NVS), Short Test of Functional Health Literacy in Adults (STOFHLA), Single Item Literacy Screener (SILS) and Single question on Self-rated Reading Ability (SrRA) among Italian oncology patients. The original version of the tools were translated from the English language into Italian using a standard forward-backward procedure and according to internationally recognized good practices. Their internal consistency (reliability) and validity (construct, convergent and discriminative) were tested in a sample of 245 consecutive cancer patients recruited from seven Italian health care centers. The internal consistency of the STOFHLA-I was Chronbach's α=0.96 and that of NVS-I was α=0.74. The STOFHLA-I, NVS-I, SILS-I and SrRA-I scores were in a good relative correlation and in all tools the discriminative known-group validity was confirmed. The reliability and validity values were similar to those obtained from other cultural context studies. The psychometric characteristics of the Italian version of NVS, STHOFLA, SILS and SrRA were found to be good, with satisfactory reliability and validity. This indicates that they could be used as a screening tool in Italian patients. Moreover, the use of the same cross-cultural tools, validated in different languages, is essential for implementing multicenter studies to measure and compare the functional HL levels across countries.

  12. Reliability and Validity of the Behavioral Addiction Measure for Video Gaming.

    Science.gov (United States)

    Sanders, James L; Williams, Robert J

    2016-01-01

    Most tests of video game addiction have weak construct validity and limited ability to correctly identify people in denial. The purpose of the present research was to investigate the reliability and validity of a new test of video game addiction (Behavioral Addiction Measure-Video Gaming [BAM-VG]) that was developed in part to address these deficiencies. Regular adult video gamers (n = 506) were recruited from a Canadian online panel and completed a survey containing three measures of excessive video gaming (BAM-VG; DSM-5 criteria for Internet Gaming Disorder [IGD]; and the IGD-20), as well as questions concerning extensiveness of video game involvement and self-report of problems associated with video gaming. One month later, they were reassessed for the purposes of establishing test-retest reliability. The BAM-VG demonstrated good internal consistency as well as 1 month test-retest reliability. Criterion-related validity was demonstrated by significant correlations with the following: time spent playing, self-identification of video game problems, and scores on other instruments designed to assess video game addiction (DSM-5 IGD, IGD-20). Consistent with the theory, principal component analysis identified two components underlying the BAM-VG that roughly correspond with impaired control and significant negative consequences deriving from this impaired control. Together with its excellent construct validity and other technical features, the BAM-VG represents a reliable and valid test of video game addiction.

  13. The Karen instruments for measuring quality of nursing care: construct validity and internal consistency.

    Science.gov (United States)

    Lindgren, Margareta; Andersson, Inger S

    2011-06-01

    Valid and reliable instruments for measuring the quality of care are needed for evaluation and improvement of nursing care. Previously developed and evaluated instruments, the Karen-patient and the Karen-personnel based on Donabedian's Structure-Process-Outcome triad (S-P-O triad) had promising content validity, discriminative power and internal consistency. The objective of this study was to further develop the instruments with regard to construct validity and internal consistency. This prospective study was carried out in medical and surgical wards at a hospital in Sweden. A total of 95 patients and 120 personnel were included. The instruments were tested for construct validity by performing factor analyses in two steps and for internal consistency using Cronbach's alpha coefficient. The first confirmatory factor analyses, with a pre-determined three-factor solution did not load well according to the S-P-O triad, but the second exploratory factor analysis with a six-factor solution appeared to be more coherent and the distribution of variables seemed to be logical. The reliability, i.e. internal consistency, was good in both factor analyses. The Karen-patient and the Karen-personnel instruments have achieved acceptable levels of construct validity. The internal consistency of the instruments is good. This indicates that the instruments may be suitable to use in clinical practice for measuring the quality of nursing care.

  14. Flipping the Continuing Medical Education Classroom: Validating a Measure of Attendees' Perceptions.

    Science.gov (United States)

    Stephenson, Christopher R; Wang, Amy T; Szostek, Jason H; Bonnes, Sara L; Ratelle, John T; Mahapatra, Saswati; Mandrekar, Jayawant N; Beckman, Thomas J; Wittich, Christopher M

    2016-01-01

    New teaching approaches for CME are needed. In flipped classrooms, coursework is completed beforehand and applied during class time. Studies of flipped classrooms and their potential benefits in CME have not been published. We sought to develop and validate an instrument measuring flipped classroom perceptions, identify whether participation changed perceptions, and determine which flipped classroom components were perceived as most effective. In this cross-sectional validation study, 167 participants in the Mayo Clinic's 2015 Internal Medicine Board Review course received surveys. Online modules were developed to deliver content before flipped classroom courses on acid-base disorders and electrolyte disorders. A flipped classroom perception instrument (FCPI) was developed and validated. The FCPI, with eight items structured on 5-point Likert scales, was given to participants before and after their flipped classroom experiences. Of the 167 participants, 111 returned surveys. Flipped classroom perceptions improved, with mean (SD) FCPI scores increasing from 3.74 (0.75) to 3.94 (0.76) (P flipped classrooms increased from 38% before the course to 53% after (P = .002). Positive changes in FCPI scores were unrelated to module completion. Most participants thought knowledge was enhanced by in-class sessions and online modules equally. The FCPI, the first validated measure of participants' perceptions of a CME flipped classroom, has strong validity evidence. Participants' perceptions of and preference for the flipped classroom improved after experiencing the flipped CME classroom. These findings support the need to further explore flipped classroom models in CME.

  15. Validation of Nonlinear Bipolar Transistor Model by Small-Signal Measurements

    DEFF Research Database (Denmark)

    Vidkjær, Jens; Porra, V.; Zhu, J.

    1992-01-01

    A new method for the validity analysis of nonlinear transistor models is presented based on DC-and small-signal S-parameter measurements and realistic consideration of the measurement and de-embedding errors and singularities of the small-signal equivalent circuit. As an example, some analysis...... results for an extended Gummel Poon model are presented in the case of a UHF bipolar power transistor....

  16. The Servant Leadership Survey: Development and Validation of a Multidimensional Measure.

    Science.gov (United States)

    van Dierendonck, Dirk; Nuijten, Inge

    2011-09-01

    PURPOSE: The purpose of this paper is to describe the development and validation of a multi-dimensional instrument to measure servant leadership. DESIGN/METHODOLOGY/APPROACH: Based on an extensive literature review and expert judgment, 99 items were formulated. In three steps, using eight samples totaling 1571 persons from The Netherlands and the UK with a diverse occupational background, a combined exploratory and confirmatory factor analysis approach was used. This was followed by an analysis of the criterion-related validity. FINDINGS: The final result is an eight-dimensional measure of 30 items: the eight dimensions being: standing back, forgiveness, courage, empowerment, accountability, authenticity, humility, and stewardship. The internal consistency of the subscales is good. The results show that the Servant Leadership Survey (SLS) has convergent validity with other leadership measures, and also adds unique elements to the leadership field. Evidence for criterion-related validity came from studies relating the eight dimensions to well-being and performance. IMPLICATIONS: With this survey, a valid and reliable instrument to measure the essential elements of servant leadership has been introduced. ORIGINALITY/VALUE: The SLS is the first measure where the underlying factor structure was developed and confirmed across several field studies in two countries. It can be used in future studies to test the underlying premises of servant leadership theory. The SLS provides a clear picture of the key servant leadership qualities and shows where improvements can be made on the individual and organizational level; as such, it may also offer a valuable starting point for training and leadership development.

  17. Single molecule activity measurements of cytochrome P450 oxidoreductase reveal the existence of two discrete functional states

    DEFF Research Database (Denmark)

    Laursen, Tomas; Singha, Aparajita; Rantzau, Nicolai

    2014-01-01

    450 enzymes. Measurements and statistical analy-sis of individual catalytic turnover cycles shows POR to sample at least two major functional states. This phenotype may underlie regulatory interactions with different cytochromes P450 but to date remained masked in bulk kinetics. To ensure that we...

  18. Aggregation of measures to produce an overall assessment of animal welfare. Part 1: a review of existing methods

    DEFF Research Database (Denmark)

    Boteau, R.; Bonde, Marianne; Butterworth, A.

    2007-01-01

    Several systems have been proposed for the overall assessment of animal welfare at the farm level for the purpose of advising farmers or assisting public decision-making. They are generally based on several measures compounded into a single evaluation, using different rules to assemble the inform...

  19. Reliability and validity of two self-report measures of cognitive flexibility.

    Science.gov (United States)

    Johnco, Carly; Wuthrich, Viviana M; Rapee, Ronald M

    2014-12-01

    Neuropsychological testing currently represents the gold standard in assessing cognitive flexibility. However, this format presents some challenges in terms of time and skills required for administration, scoring, and interpretation. Two self-report measures of cognitive flexibility have been developed to measure aspects of cognitive flexibility in everyday settings, although neither has been validated in an older sample. In this study, we investigated the psychometric properties of 2 self-report measures of cognitive flexibility, the Cognitive Flexibility Inventory (CFI; Dennis & Vander Wal, 2010) and the Cognitive Flexibility Scale (CFS; Martin & Rubin, 1995), against neuropsychological measures of cognitive flexibility in a clinical sample of 47 older adults with comorbid anxiety and depression and a nonclinical sample of 53 community-dwelling older adults. Internal consistency was good for the CFS and CFI in all samples. The clinical sample reported poorer cognitive flexibility than did the nonclinical sample on self-report measures and performed more poorly on some neuropsychological measures. There was evidence of convergent validity between the 2 self-report measures but little relationship between the self-report and neuropsychological measures of cognitive flexibility, suggesting that self-report measures assess a different aspect of cognitive flexibility than does neuropsychological testing. Divergent validity was weak from measures of anxiety and depression in the combined and nonclinical samples but acceptable in the clinical sample. Results suggest that these measures are suitable for use with an older adult sample but do not assess the same aspects of cognitive flexibility as are assessed by neuropsychological assessment. (c) 2014 APA, all rights reserved.

  20. Measurement and validation of measures for impulsive food choice across obese and healthy-weight individuals.

    Science.gov (United States)

    Hendrickson, Kelsie L; Rasmussen, Erin B; Lawyer, Steven R

    2015-07-01

    The present study established a brief measure of delay discounting for food, the Food Choice Questionnaire (FCQ), and compared it to another more established measure of food discounting that uses the adjusting amount (AA) procedure. One hundred forty-four undergraduate participants completed either two measures of hypothetical food discounting (a computerized food AA procedure or the FCQ) or two measures of hypothetical money discounting [a computerized monetary AA procedure or the Monetary Choice questionnaire (MCQ)]. The money condition was used as a replication of previous work. Results indicated that the FCQ yielded consistent data that strongly correlated with the AA food discounting task. Moreover, a magnitude effect was found with the FCQ, such that smaller amounts of food were discounted more steeply than larger amounts. In addition, individuals with higher percent body fat (PBF) discounted food more steeply than individuals with lower PBF. The MCQ, which also produced a magnitude effect, and the monetary adjusting amount procedure yielded data that were orderly, consistent, and correlated strongly with one another, replicating previous literature. This study is the first to show that a novel measure of food discounting (the FCQ) yields consistent data strongly correlated with an established measure of food discounting and is sensitive to PBF. Moreover, the FCQ is easier and quicker to administer than the AA procedure, which may interest researchers who use discounting tasks in food-related research. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Measurement error correction in the least absolute shrinkage and selection operator model when validation data are available.

    Science.gov (United States)

    Vasquez, Monica M; Hu, Chengcheng; Roe, Denise J; Halonen, Marilyn; Guerra, Stefano

    2017-01-01

    Measurement of serum biomarkers by multiplex assays may be more variable as compared to single biomarker assays. Measurement error in these data may bias parameter estimates in regression analysis, which could mask true associations of serum biomarkers with an outcome. The Least Absolute Shrinkage and Selection Operator (LASSO) can be used for variable selection in these high-dimensional data. Furthermore, when the distribution of measurement error is assumed to be known or estimated with replication data, a simple measurement error correction method can be applied to the LASSO method. However, in practice the distribution of the measurement error is unknown and is expensive to estimate through replication both in monetary cost and need for greater amount of sample which is often limited in quantity. We adapt an existing bias correction approach by estimating the measurement error using validation data in which a subset of serum biomarkers are re-measured on a random subset of the study sample. We evaluate this method using simulated data and data from the Tucson Epidemiological Study of Airway Obstructive Disease (TESAOD). We show that the bias in parameter estimation is reduced and variable selection is improved.

  2. Concurrent validation of an inertial measurement system to quantify kicking biomechanics in four football codes.

    Science.gov (United States)

    Blair, Stephanie; Duthie, Grant; Robertson, Sam; Hopkins, William; Ball, Kevin

    2018-05-17

    Wearable inertial measurement systems (IMS) allow for three-dimensional analysis of human movements in a sport-specific setting. This study examined the concurrent validity of a IMS (Xsens MVN system) for measuring lower extremity and pelvis kinematics in comparison to a Vicon motion analysis system (MAS) during kicking. Thirty footballers from Australian football (n = 10), soccer (n = 10), rugby league and rugby union (n = 10) clubs completed 20 kicks across four conditions. Concurrent validity was assessed using a linear mixed-modelling approach, which allowed the partition of between and within-subject variance from the device measurement error. Results were expressed in raw and standardised units for assessments of differences in means and measurement error, and interpreted via non-clinical magnitude-based inferences. Trivial to small differences were found in linear velocities (foot and pelvis), angular velocities (knee, shank and thigh), sagittal joint (knee and hip) and segment angle (shank and pelvis) means (mean difference: 0.2-5.8%) between the IMS and MAS in Australian football, soccer and the rugby codes. Trivial to small measurement errors (from 0.1 to 5.8%) were found between the IMS and MAS in all kinematic parameters. The IMS demonstrated acceptable levels of concurrent validity compared to a MAS when measuring kicking biomechanics across the four football codes. Wearable IMS offers various benefits over MAS, such as, out-of-laboratory testing, larger measurement range and quick data output, to help improve the ecological validity of biomechanical testing and the timing of feedback. The results advocate the use of IMS to quantify biomechanics of high-velocity movements in sport-specific settings. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Validity of bioelectrical impedance measurement in predicting fat-free mass of Chinese children and adolescents.

    Science.gov (United States)

    Wang, Lin; Hui, Stanley Sai-chuen; Wong, Stephen Heung-sang

    2014-11-15

    The current study aimed to examine the validity of various published bioelectrical impedance analysis (BIA) equations in estimating FFM among Chinese children and adolescents and to develop BIA equations for the estimation of fat-free mass (FFM) appropriate for Chinese children and adolescents. A total of 255 healthy Chinese children and adolescents aged 9 to 19 years old (127 males and 128 females) from Tianjin, China, participated in the BIA measurement at 50 kHz between the hand and the foot. The criterion measure of FFM was also employed using dual-energy X-ray absorptiometry (DEXA). FFM estimated from 24 published BIA equations was cross-validated against the criterion measure from DEXA. Multiple linear regression was conducted to examine alternative BIA equation for the studied population. FFM estimated from the 24 published BIA equations yielded high correlations with the directly measured FFM from DEXA. However, none of the 24 equations was statistically equivalent with the DEXA-measured FFM. Using multiple linear regression and cross-validation against DEXA measurement, an alternative prediction equation was determined as follows: FFM (kg)=1.613+0.742×height (cm)2/impedance (Ω)+0.151×body weight (kg); R2=0.95; SEE=2.45 kg; CV=6.5, 93.7% of the residuals of all the participants fell within the 95% limits of agreement. BIA was highly correlated with FFM in Chinese children and adolescents. When the new developed BIA equations are applied, BIA can provide a practical and valid measurement of body composition in Chinese children and adolescents.

  4. Surface pressure retrieval from SCIAMACHY measurements in the O2 A Band: validation of the measurements and sensitivity on aerosols

    Directory of Open Access Journals (Sweden)

    B. van Diedenhoven

    2005-01-01

    Full Text Available We perform surface pressure retrievals from cloud-free Oxygen A band measurements of SCIAMACHY. These retrievals can be well validated because surface pressure is a quantity that is, in general, accurately known from meteorological models. Therefore, surface pressure retrievals and their validation provide important insight into the quality of the instrument calibration. Furthermore, they can provide insight into retrievals which are affected by similar radiation transport processes, for example the retrieval of total columns of H2O, CO, CO2 and CH4. In our retrieval aerosols are neglected. Using synthetic measurements, it is shown that for low to moderate surface albedos this leads to an underestimation of the retrieved surface pressures. For high surface albedos this generally leads to an overestimation of the retrieved surface pressures. The surface pressures retrieved from the SCIAMACHY measurements indeed show this dependence on surface albedo, when compared to the corresponding pressures from a meteorological database. However, an offset of about 20 hPa was found, which can not be caused by neglecting aerosols in the retrieval. The same offset was found when comparing the retrieved surface pressures to those retrieved from co-located GOME Oxygen A band measurements. This implies a calibration error in the SCIAMACHY measurements. By adding an offset of 0.86% of the continuum reflectance at 756 nm to the SCIAMACHY reflectance measurements, this systematic bias vanishes.

  5. Reliability and validity of the Pragmatics Observational Measure (POM): a new observational measure of pragmatic language for children.

    Science.gov (United States)

    Cordier, Reinie; Munro, Natalie; Wilkes-Gillan, Sarah; Speyer, Renée; Pearce, Wendy M

    2014-07-01

    There is a need for a reliable and valid assessment of childhood pragmatic language skills during peer-peer interactions. This study aimed to evaluate the psychometric properties of a newly developed pragmatic assessment, the Pragmatic Observational Measure (POM). The psychometric properties of the POM were investigated from observational data of two studies - study 1 involved 342 children aged 5-11 years (108 children with ADHD; 108 typically developing playmates; 126 children in the control group), and study 2 involved 9 children with ADHD who attended a 7-week play-based intervention. The psychometric properties of the POM were determined based on the COnsensus-based Standards for the selection of health status Measurement INstruments (COSMIN) taxonomy of psychometric properties and definitions for health-related outcomes; the Pragmatic Protocol was used as the reference tool against which the POM was evaluated. The POM demonstrated sound psychometric properties in all the reliability, validity and interpretability criteria against which it was assessed. The findings showed that the POM is a reliable and valid measure of pragmatic language skills of children with ADHD between the age of 5 and 11 years and has clinical utility in identifying children with pragmatic language difficulty. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  6. Groups of homeomorphisms of the line. Criteria for the existence of invariant and projectively invariant measures in terms of the commutator subgroup

    Energy Technology Data Exchange (ETDEWEB)

    Beklaryan, L A [Central Economics and Mathematics Institute, RAS, Moscow (Russian Federation)

    2014-12-31

    Existence criteria for invariant and projectively invariant measures are obtained for a group G of homeomorphisms of the line. These criteria are formulated in terms of the commutator subgroup [G,G]. For the special (but very important) case of groups of homeomorphisms of the line containing a freely acting element we obtain a criterion for the existence of a projectively invariant measure in the form of the absence of a special subgroup with two generators in which one of the generating elements is a freely acting element. Bibliography: 20 titles.

  7. Development and validation of measures to assess prevention and control of AMR in hospitals.

    Science.gov (United States)

    Flanagan, Mindy; Ramanujam, Rangaraj; Sutherland, Jason; Vaughn, Thomas; Diekema, Daniel; Doebbeling, Bradley N

    2007-06-01

    The rapid spread of antimicrobial resistance (AMR) in the US hospitals poses serious quality and safety problems. Expert panels, identifying strategies for optimizing antibiotic use and preventing AMR spread, have recommended hospitals undertake efforts to implement specific evidence-based practices. To develop and validate a measurement scale for assessing hospitals' efforts to implement recommended AMR prevention and control measures. Surveys were mailed to infection control professionals in a national sample of 670 US hospitals stratified by geographic region, bedsize, teaching status, and VA affiliation. : Four hundred forty-eight infection control professionals participated (67% response rate). Survey items measured implementation of guideline recommendations, practices for AMR monitoring and feedback, AMR-related outcomes (methicillin-resistant Staphylococcus aureus prevalence and outbreaks [MRSA]), and organizational features. "Derivation" and "validation" samples were randomly selected. Exploratory factor analysis was performed to identify factors underlying AMR prevention and control efforts. Multiple methods were used for validation. We identified 4 empirically distinct factors in AMR prevention and control: (1) practices for antimicrobial prescription/use, (2) information/resources for AMR control, (3) practices for isolating infected patients, and (4) organizational support for infection control policies. The Prevention and Control of Antimicrobial Resistance scale was reliable and had content and construct validity. MRSA prevalence was significantly lower in hospitals with higher resource/information availability and broader organizational support. The Prevention and Control of Antimicrobial Resistance scale offers a simple yet discriminating assessment of AMR prevention and control efforts. Use should complement assessment methods based exclusively on AMR outcomes.

  8. Validation of the Malaysian Coping Strategy Instrument to measure household food insecurity in Kelantan, Malaysia.

    Science.gov (United States)

    Sulaiman, Norhasmah; Shariff, Zalilah Mohd; Jalil, Rohana Abdul; Taib, Mohd Nasir Mohd; Kandiah, Mirnalini; Samah, Asnarulkhadi Abu

    2011-12-01

    Food insecurity occurs whenever people are not able to access enough food at all times for an active and healthy life or when adequate and safe food acquired by socially acceptable ways is not available. To validate the Malaysian Coping Strategy Instrument (MCSI) to measure household food insecurity in Kelantan, Malaysia. A cross-sectional study was conducted on 301 nonpregnant, nonlactating Malay women, aged between 19 and 49 years, living in rural and urban areas. The respondents were interviewed with the use of a structured questionnaire to obtain information on their demographic and socioeconomic characteristics, household food security, and dietary intake. Demographic and socioeconomic characteristics (household size, number of children, number of children attending school, household income, and per capita income) were significantly associated with household food-security status in rural and urban areas. Energy intake, fat intake, percentage of energy from fat, and number of servings of meat,fish, or poultry and legumes were significantly associated with household food-security status in rural areas. The dietary diversity score was significantly associated with household food-security status in rural and urban areas. Validating the MCSI in other areas of Malaysia as well as in similar settings elsewhere in the world before it is used to measure household food insecurity in the population is strongly recommended. In this study, the MCSI was found to be a reliable and valid measure of household food insecurity based on criterion-related validity, particularly in terms of demographic and socioeconomic characteristics and dietary diversity.

  9. Development and validation of a new tool to measure Iranian pregnant women's empowerment.

    Science.gov (United States)

    Borghei, N S; Taghipour, A; Roudsari, R Latifnejad; Keramat, A

    2016-03-15

    Empowering pregnant women improves their health and reduces maternal mortality, but there is a lack of suitable tools to measure women's empowerment in some cultures. This study aimed to design and validate a questionnaire for measuring the dimensions of empowerment among Iranian pregnant women. After a literature review, and face and content validity testing, a 38-item questionnaire was developed and tested on a sample of 161 pregnant women. Factor analysis grouped the items into 3 subscales: educational empowerment (e.g. prenatal training), autonomy (e.g. financial independency and mental ability) and sociopolitical empowerment (e.g. involvement in social and political activities). Criterion validity testing showed a strong positive correlation of the total scale and subscales scores with the Kameda and the Spritzer empowerment scales. Cronbach alpha was 0.92 for total empowerment. A total of 32 items remained in the Self-Structured Pregnancy Empowerment Questionnaire, which is a valid new tool to measure the dimensions of pregnant women's empowerment.

  10. Validation of a Brief Questionnaire Measuring Positive Mindset in Patients With Uveitis

    Directory of Open Access Journals (Sweden)

    John A. Barry

    2014-03-01

    Full Text Available AimIllness may impact the positivity of a person’s mindset. However, patients with visual impairment, such as uveitis, may struggle to complete questionnaires. The aim of this study was to validate a brief and simple measure of positive mindset in people with uveitis.MethodThis study was a cross-sectional survey of 200 people with uveitis. The Positive Mindset Index (PMI questionnaire uses six items to measure a patient’s happiness, confidence, sense of being in control, stability, motivation, and optimism. ResultsExploratory factor analysis revealed a well-fitting unidimensional factor structure (KMO = .898, with strong factor loadings (from .616 to .721 and excellent internal reliability (Cronbach’s α = .926. The PMI showed strong concurrent validity with the mental health subscale of the SF-36 (r = .789 and good construct validity relative to the physical health subscale of the SF-36 (r = .468. Excellent test-retest reliability was seen (r = .806. Patients taking 10 mg or more corticosteroid daily had significantly lower PMI scores than those on a lower dose or no dose (t (170 = 2.298, p < .023.ConclusionThe PMI has good face validity and sound psychometric properties. It is a very brief and simple measure, thus user-friendly for patients with visual impairment, as well as researchers and others using the scale.

  11. Validation of an instrument to measure older adults' expectations regarding movement (ERM.

    Directory of Open Access Journals (Sweden)

    Nabila Dahodwala

    Full Text Available BACKGROUND: Many individuals with Parkinson's disease are not diagnosed and treated. Attitudes about aging and related help-seeking may affect the timely diagnosis of Parkinson's disease. Our objectives were to develop measures of older adults' expectations regarding movement with aging, specifically related to parkinsonism, and their beliefs about seeking healthcare for the diagnosis and treatment of parkinsonism. METHODS: We established content and face validity from interviews with experts, review of the literature, and pre-testing with key informants. Two 9-item instruments resulted: Expectations Regarding Movement (ERM and Healthcare Seeking Beliefs for parkinsonism (HSB. These instruments were administered to 210 older adults at senior centers to investigate internal consistency and construct validity. RESULTS: 192 (91% of the older adults completed more than 90% of the survey. The mean age was 76; 17 (9% reported parkinsonism. Both scales demonstrated good internal consistency (α = 0.90. Factor analysis supported construct validity of the ERM and HSB scores. Older age, lower education, worse self-reported health and African American race each were associated with lower ERM scores, but not HSB scores. CONCLUSION: The ERM, a brief measure of expectations regarding movement with aging, shows reliability and validity. This scale may be useful in identifying older adults at increased risk for under-identification of Parkinson's disease. Further work is needed to measure healthcare seeking for parkinsonism.

  12. Spanish translation and validation of the Scale for Contraversive Pushing to measure pusher behaviour.

    Science.gov (United States)

    Martín-Nieto, A; Atín-Arratibel, M Á; Bravo-Llatas, C; Moreno-Bermejo, M I; Martín-Casas, P

    2018-06-08

    The aim of this study was to develop and validate a Spanish-language version of the Scale for Contraversive Pushing, used to diagnose and measure pusher behaviour in stroke patients. Translation-back translation was used to create the Spanish-language Scale for Contraversive Pushing; we subsequently evaluated its validity and reliability by administering it to a sample of patients. We also analysed its sensitivity to change in patients identified as pushers who received neurological physiotherapy. Experts indicated that the content of the scale was valid. Internal consistency was very good (Cronbach's alpha of 0.94). The intraclass correlation coefficient showed high intra- and interobserver reliability (0.999 and 0.994, respectively). The Kappa and weighted Kappa coefficients were used to measure the reliability of each item; the majority obtained values above 0.9. Lastly, the differences between baseline and final evaluations of pushers were significant (paired sample t test), showing that the scale is sensitive to changes obtained through physical therapy. The Spanish-language version of the Scale for Contraversive Pushing is valid and reliable for measuring pusher behaviour in stroke patients. In addition, it is able to evaluate the ongoing changes in patients who have received physical therapy. Copyright © 2018 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

  13. Validating Quantitative Measurement Using Qualitative Data: Combining Rasch Scaling and Latent Semantic Analysis in Psychiatry

    Science.gov (United States)

    Lange, Rense

    2015-02-01

    An extension of concurrent validity is proposed that uses qualitative data for the purpose of validating quantitative measures. The approach relies on Latent Semantic Analysis (LSA) which places verbal (written) statements in a high dimensional semantic space. Using data from a medical / psychiatric domain as a case study - Near Death Experiences, or NDE - we established concurrent validity by connecting NDErs qualitative (written) experiential accounts with their locations on a Rasch scalable measure of NDE intensity. Concurrent validity received strong empirical support since the variance in the Rasch measures could be predicted reliably from the coordinates of their accounts in the LSA derived semantic space (R2 = 0.33). These coordinates also predicted NDErs age with considerable precision (R2 = 0.25). Both estimates are probably artificially low due to the small available data samples (n = 588). It appears that Rasch scalability of NDE intensity is a prerequisite for these findings, as each intensity level is associated (at least probabilistically) with a well- defined pattern of item endorsements.

  14. Existing and emerging technologies for measuring stable isotope labelled retinol in biological samples: isotope dilution analysis of body retinol stores.

    Science.gov (United States)

    Preston, Tom

    2014-01-01

    This paper discusses some of the recent improvements in instrumentation used for stable isotope tracer measurements in the context of measuring retinol stores, in vivo. Tracer costs, together with concerns that larger tracer doses may perturb the parameter under study, demand that ever more sensitive mass spectrometric techniques are developed. GCMS is the most widely used technique. It has high sensitivity in terms of sample amount and uses high resolution GC, yet its ability to detect low isotope ratios is limited by background noise. LCMSMS may become more accessible for tracer studies. Its ability to measure low level stable isotope tracers may prove superior to GCMS, but it is isotope ratio MS (IRMS) that has been designed specifically for low level stable isotope analysis through accurate analysis of tracer:tracee ratios (the tracee being the unlabelled species). Compound-specific isotope analysis, where GC is interfaced to IRMS, is gaining popularity. Here, individual 13C-labelled compounds are separated by GC, combusted to CO2 and transferred on-line for ratiometric analysis by IRMS at the ppm level. However, commercially-available 13C-labelled retinol tracers are 2 - 4 times more expensive than deuterated tracers. For 2H-labelled compounds, GC-pyrolysis-IRMS has now become more generally available as an operating mode on the same IRMS instrument. Here, individual compounds are separated by GC and pyrolysed to H2 at high temperature for analysis by IRMS. It is predicted that GC-pyrolysis-IRMS will facilitate low level tracer procedures to measure body retinol stores, as has been accomplished in the case of fatty acids and amino acids. Sample size requirements for GC-P-IRMS may exceed those of GCMS, but this paper discusses sample preparation procedures and predicts improvements, particularly in the efficiency of sample introduction.

  15. Measure Guideline: Wall Air Sealing and Insulation Methods in Existing Homes; An Overview of Opportunity and Process

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, S.; Stephenson, R.

    2012-09-01

    This guide provides renovators and retrofit contractors an overview of considerations when including wall air sealing and insulation in an energy retrofit project. It also outlines the potential project risks, various materials for insulating, possible field inspections needed, installation procedures, as well as the benefits and drawbacks. The purpose of this document is to provide the outline of the overview and process of insulating and air sealing walls so that home retrofit professionals can identify approaches to air sealing and insulation measures.

  16. Fission Meter Information Barrier Attribute Measurement System: Task 1 Report: Document existing Fission Meter neutron IB system

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, P. L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-02-28

    An SNM attribute Information Barrier (IB) system was developed for a 2011 US/UK Exercise. The system was modified and extensively tested in a 2013-2014 US-UK Measurement Campaign. This work demonstrated rapid deployment of an IB system for potential treaty use. The system utilizes an Ortec Fission Meter neutron multiplicity counter and custom computer code. The system demonstrates a proof-of-principle automated Pu-240 mass determination with an information barrier. After a software start command is issued, the system automatically acquires and downloads data, performs an analysis, and displays the results. This system conveys the results of a Pu mass threshold measurements in a way the does not reveal sensitive information. In full IB mode, only red/green ‘lights’ are displayed in the software. In test mode, more detailed information is displayed. The code can also read in, analyze, and display results from previously acquired or simulated data. Because the equipment is commercial-off-the-shelf (COTS), the system demonstrates a low-cost short-lead-time technology for treaty SNM attribute measurements. A deployed system will likely require integration of additional authentication and tamper-indicating technologies. This will be discussed for the project in this and future progress reports.

  17. Improvement of Simulation Method in Validation of Software of the Coordinate Measuring Systems

    Science.gov (United States)

    Nieciąg, Halina

    2015-10-01

    Software is used in order to accomplish various tasks at each stage of the functioning of modern measuring systems. Before metrological confirmation of measuring equipment, the system has to be validated. This paper discusses the method for conducting validation studies of a fragment of software to calculate the values of measurands. Due to the number and nature of the variables affecting the coordinate measurement results and the complex character and multi-dimensionality of measurands, the study used the Monte Carlo method of numerical simulation. The article presents an attempt of possible improvement of results obtained by classic Monte Carlo tools. The algorithm LHS (Latin Hypercube Sampling) was implemented as alternative to the simple sampling schema of classic algorithm.

  18. Improvement of Simulation Method in Validation of Software of the Coordinate Measuring Systems

    Directory of Open Access Journals (Sweden)

    Nieciąg Halina

    2015-10-01

    Full Text Available Software is used in order to accomplish various tasks at each stage of the functioning of modern measuring systems. Before metrological confirmation of measuring equipment, the system has to be validated. This paper discusses the method for conducting validation studies of a fragment of software to calculate the values of measurands. Due to the number and nature of the variables affecting the coordinate measurement results and the complex character and multi-dimensionality of measurands, the study used the Monte Carlo method of numerical simulation. The article presents an attempt of possible improvement of results obtained by classic Monte Carlo tools. The algorithm LHS (Latin Hypercube Sampling was implemented as alternative to the simple sampling schema of classic algorithm.

  19. Development and Initial Validation of the Caregiver Perceptions About Communication With Clinical Team Members (CAPACITY) Measure.

    Science.gov (United States)

    Van Houtven, Courtney Harold; Miller, Katherine E M; O'Brien, Emily C; Wolff, Jennifer L; Lindquist, Jennifer; Kabat, Margaret; Campbell-Kotler, Margaret; Henius, Jennifer; Voils, Corrine I

    2017-12-01

    Despite the important role that family caregivers play managing the care of persons with complex health needs, little is known about how caregivers perceive themselves to be recognized and valued by health care professionals. Our objective was to develop and validate a novel measure, the CAregiver Perceptions About Commun Ication with Clinical Team members (CAPACITY) instrument. Questions focus on perceived quality of communication with the health care team and the extent to which caregivers believe that the health care team considers their capacity and preferences in decision making. A confirmatory factor analysis supported a two-factor solution addressing communication and capacity. Internal consistency reliability was .90 for the communication domain and .93 for the capacity domain. Correlations between these two subscales and individual difference measures provided evidence of convergent and discriminant validity. The CAPACITY instrument may be a useful performance measure that quantifies the extent to which caregivers' experience person- and family-centered health care.

  20. Validation of a measurement tool to assess awareness of breast cancer.

    Science.gov (United States)

    Linsell, Louise; Forbes, Lindsay J L; Burgess, Caroline; Kapari, Marcia; Thurnham, Angela; Ramirez, Amanda J

    2010-05-01

    Until now, there has been no universally accepted and validated measure of breast cancer awareness. This study aimed to validate the new Breast Cancer Awareness Measure (BCAM) which assesses, using a self-complete questionnaire, knowledge of breast cancer symptoms and age-related risk, and frequency of breast checking. We measured the psychometric properties of the BCAM in 1035 women attending the NHS Breast Screening Programme: acceptability was assessed using a feedback questionnaire (n=292); sensitivity to change after an intervention promoting breast cancer awareness (n=576), and test-retest reliability (n=167). We also assessed readability, and construct validity using the 'known-groups' method. The readability of the BCAM was high. Over 90% of women found it acceptable. The BCAM was sensitive to change: there was an increase in the proportion of women obtaining the full score for breast cancer awareness one month after receiving the intervention promoting breast cancer awareness; this was greater among those who received a more intensive version (less intensive version (booklet): 9.3%, 95% confidence interval (CI): 4.5-14.1%; more intensive version (interaction with health professional plus booklet): 30%, 95% CI: 23.4-36.6%). Test-retest reliability of the BCAM was moderate to good for most items. Cancer experts had higher levels of cancer awareness than non-medical academics (50% versus 6%, p=0.001), indicating good construct validity. The BCAM is a valid and robust measure of breast cancer awareness suitable for use in surveys of breast cancer awareness in the general population and to evaluate the impact of awareness-raising interventions. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  1. Validation of the historical adulthood physical activity questionnaire (HAPAQ against objective measurements of physical activity

    Directory of Open Access Journals (Sweden)

    McDermott Christopher J

    2010-06-01

    Full Text Available Abstract Background Lifetime physical activity energy expenditure (PAEE is an important determinant of risk for many chronic diseases but remains challenging to measure. Previously reported historical physical activity (PA questionnaires appear to be reliable, but their validity is less well established. Methods We sought to design and validate an historical adulthood PA questionnaire (HAPAQ against objective PA measurements from the same individuals. We recruited from a population-based cohort in Cambridgeshire, UK, (Medical Research Council Ely Study in whom PA measurements, using individually calibrated heart rate monitoring, had been obtained in the past, once between 1994 and 1996 and once between 2000 and 2002. 100 individuals from this cohort attended for interview. Historical PA within the domains of home, work, transport, sport and exercise was recalled using the questionnaire by asking closed questions repeated for several discrete time periods from the age of 20 years old to their current age. The average PAEE from the 2 periods of objective measurements was compared to the self-reported data from the corresponding time periods in the questionnaire. Results Significant correlations were observed between HAPAQ-derived and objectively measured total PAEE for both time periods (Spearman r = 0.44; P Conclusions HAPAQ demonstrates convergent validity for total PAEE and vigorous PA. This instrument will be useful for ranking individuals according to their past PA in studies of chronic disease aetiology, where activity may be an important underlying factor contributing to disease pathogenesis.

  2. Self-report measures of prospective memory are reliable but not valid.

    Science.gov (United States)

    Uttl, Bob; Kibreab, Mekale

    2011-03-01

    Are self-report measures of prospective memory (ProM) reliable and valid? To examine this question, 240 undergraduate student volunteers completed several widely used self-report measures of ProM including the Prospective Memory Questionnaire (PMQ), the Prospective and Retrospective Memory Questionnaire (PRMQ), the Comprehensive Assessment of Prospective Memory (CAPM) questionnaire, self-reports of retrospective memory (RetM), objective measures of ProM and RetM, and measures of involvement in activities and events, memory strategies and aids use, personality and verbal intelligence. The results showed that both convergent and divergent validity of ProM self-reports are poor, even though we assessed ProM using a newly developed, reliable continuous measure. Further analyses showed that a substantial proportion of variability in ProM self-report scores was due to verbal intelligence, personality (conscientiousness, neuroticism), activities and event involvement (busyness), and use of memory strategies and aids. ProM self-reports have adequate reliability, but poor validity and should not be interpreted as reflecting ProM ability. (PsycINFO Database Record (c) 2011 APA, all rights reserved).

  3. Validation of a measurement tool for self-assessment of teamwork in intensive care.

    Science.gov (United States)

    Weller, J; Shulruf, B; Torrie, J; Frengley, R; Boyd, M; Paul, A; Yee, B; Dzendrowskyj, P

    2013-09-01

    Teamwork is an important contributor to patient safety and a validated teamwork measurement tool could help healthcare teams identify areas for improvement and measure progress. We explored the psychometric properties of a teamwork measurement tool when used for self-assessment. We hypothesized that the tool had a valid factor structure and that scores from participants and external assessors would correlate. Forty intensive care teams (one doctor, three nurses) participated in four simulated emergencies, and each independently rated their team's performance at the end of each case using the teamwork measurement tool, without prior training in the use of the tool. We used exploratory factor analysis (EFA) and confirmatory factor analysis (CFA), and compared factor structure between participants and external assessors (using previously reported data). Scores from participants and external assessors were compared using Pearson's correlation coefficient. EFA demonstrated items loaded onto three distinct factors which were supported by the CFA. We found significant correlations between external and participant scores for overall teamwork scores and the three factors. Participants agreed with external assessors on the ranking of overall team performance but scored themselves significantly higher than external assessors. The teamwork measurement tool has a valid structure when used for self-assessment. Participant and external assessor scores correlated significantly, suggesting that participants could discriminate between different levels of performance, although leniency in self-assessed scores indicated the need for calibration. This tool could help structure reflection on teamwork and potentially facilitate self-directed, workplace-based improvement in teamwork.

  4. A Comparison of Three Job Engagement Measures: Examining their Factorial and Criterion-Related Validity.

    Science.gov (United States)

    Wefald, Andrew J; Mills, Maura J; Smith, Michael R; Downey, Ronald G

    2012-03-01

    Engagement is an emerging job attitude that purports to measure employees' psychological presence at and involvement in their work. This research compares three academic approaches to engagement, and makes recommendations regarding the most appropriate conceptualisation and measurement of the construct in future research. The current research also investigates whether any of these three approaches to engagement contribute unique variance to the prediction of turnover intentions above and beyond the predictive capacity of alternative constructs. An online survey was taken by 382 employees and managers from a mid-sized financial institution. Results failed to support either a multi- or unidimensional factor structure for the Utrecht Work Engagement Scale (UWES) engagement measure. For the Shirom-Melamed Vigor Measure (SMVM), a multi-dimensional structure was identified as a good fit, while a unidimensional structure fit poorly. The uni-factorial structure of Britt's engagement measure was confirmed. The Schaufeli measure of engagement was a strong predictor of work outcomes; however, when controlling for job satisfaction and affective commitment, that measure lost its ability to predict intentions to leave. Two components of the Shirom vigor measure held their predictive validity. Collectively, these findings suggest that the Shirom vigor measure may provide better insight into whether and how much a person is 'into' his or her job. The Schaufeli measure was a good predictor of important work outcomes, but when job satisfaction and affective commitment were controlled, it lost its predictive validity. We were not able to confirm the three-factor structure of the Schaufeli measure. Two components of the Shirom vigor measure predicted turnover intentions after controlling for job satisfaction and affective commitment, suggesting less overlap with those constructs than the Schaufeli measure of engagement. This research adds important information on the nature of

  5. Toward a Common Language for Measuring Patient Mobility in the Hospital: Reliability and Construct Validity of Interprofessional Mobility Measures.

    Science.gov (United States)

    Hoyer, Erik H; Young, Daniel L; Klein, Lisa M; Kreif, Julie; Shumock, Kara; Hiser, Stephanie; Friedman, Michael; Lavezza, Annette; Jette, Alan; Chan, Kitty S; Needham, Dale M

    2018-02-01

    The lack of common language among interprofessional inpatient clinical teams is an important barrier to achieving inpatient mobilization. In The Johns Hopkins Hospital, the Activity Measure for Post-Acute Care (AM-PAC) Inpatient Mobility Short Form (IMSF), also called "6-Clicks," and the Johns Hopkins Highest Level of Mobility (JH-HLM) are part of routine clinical practice. The measurement characteristics of these tools when used by both nurses and physical therapists for interprofessional communication or assessment are unknown. The purposes of this study were to evaluate the reliability and minimal detectable change of AM-PAC IMSF and JH-HLM when completed by nurses and physical therapists and to evaluate the construct validity of both measures when used by nurses. A prospective evaluation of a convenience sample was used. The test-retest reliability and the interrater reliability of AM-PAC IMSF and JH-HLM for inpatients in the neuroscience department (n = 118) of an academic medical center were evaluated. Each participant was independently scored twice by a team of 2 nurses and 1 physical therapist; a total of 4 physical therapists and 8 nurses participated in reliability testing. In a separate inpatient study protocol (n = 69), construct validity was evaluated via an assessment of convergent validity with other measures of function (grip strength, Katz Activities of Daily Living Scale, 2-minute walk test, 5-times sit-to-stand test) used by 5 nurses. The test-retest reliability values (intraclass correlation coefficients) for physical therapists and nurses were 0.91 and 0.97, respectively, for AM-PAC IMSF and 0.94 and 0.95, respectively, for JH-HLM. The interrater reliability values (intraclass correlation coefficients) between physical therapists and nurses were 0.96 for AM-PAC IMSF and 0.99 for JH-HLM. Construct validity (Spearman correlations) ranged from 0.25 between JH-HLM and right-hand grip strength to 0.80 between AM-PAC IMSF and the Katz Activities of

  6. Validity evidence for the measurement of the strength of motivation for medical school.

    Science.gov (United States)

    Kusurkar, Rashmi; Croiset, Gerda; Kruitwagen, Cas; ten Cate, Olle

    2011-05-01

    The Strength of Motivation for Medical School (SMMS) questionnaire is designed to determine the strength of motivation of students particularly for medical study. This research was performed to establish the validity evidence for measuring strength of motivation for medical school. Internal structure and relations to other variables were used as the sources of validity evidence. The SMMS questionnaire was filled out by 1,494 medical students in different years of medical curriculum. The validity evidence for the internal structure was analyzed by principal components analysis with promax rotation. Validity evidence for relations to other variables was tested by comparing the SMMS scores with scores on the Academic Motivation Scale (AMS) and the exhaustion scale of Maslach Burnout Inventory-Student Survey (MBI-SS) for measuring study stress. Evidence for internal consistency was determined through the Cronbach's alpha for reliability. The analysis showed that the SMMS had a 3-factor structure. The validity in relations to other variables was established as both, the subscales and full scale scores significantly correlated positively with the intrinsic motivation scores and with the more autonomous forms of extrinsic motivation, the correlation decreasing and finally becoming negative towards the extrinsic motivation end of the spectrum. They also had significant negative correlations with amotivation scale of the AMS and exhaustion scale of MBI-SS. The Cronbach's alpha for reliability of the three subscales and full SMMS scores was 0.70, 0.67, 0.55 and 0.79. The strength of motivation for medical school has a three factor structure and acceptable validity evidence was found in our study.

  7. [Relevance and validity of a new French composite index to measure poverty on a geographical level].

    Science.gov (United States)

    Challier, B; Viel, J F

    2001-02-01

    A number of disease conditions are influenced by deprivation. Geographical measurement of deprivation can provide an independent contribution to individual measures by accounting for the social context. Such a geographical approach, based on deprivation indices, is classical in Great Britain but scarcely used in France. The objective of this work was to build and validate an index readily usable in French municipalities and cantons. Socioeconomic data (unemployment, occupations, housing specifications, income, etc.) were derived from the 1990 census of municipalities and cantons in the Doubs departement. A new index was built by principal components analysis on the municipality data. The validity of the new index was checked and tested for correlations with British deprivation indices. Principal components analysis on municipality data identified four components (explaining 76% of the variance). Only the first component (CP1 explaining 42% of the variance) was retained. Content validity (wide choice of potential deprivation items, correlation between items and CP1: 0.52 to 0.96) and construct validity (CP1 socially relevant; Cronbach's alpha=0.91; correlation between CP1 and three out of four British indices ranging from 0.73 to 0.88) were sufficient. Analysis on canton data supported that on municipality data. The validation of the new index being satisfactory, the user will have to make a choice. The new index, CP1, is closer to the local background and was derived from data from a French departement. It is therefore better adapted to more descriptive approaches such as health care planning. To examine the relationship between deprivation and health with a more etiological approach, the British indices (anteriority, international comparisons) would be more appropriate, but CP1, once validated in various health problem situations, should be most useful for French studies.

  8. Are implicit self-esteem measures valid for assessing individual and cultural differences?

    Science.gov (United States)

    Falk, Carl F; Heine, Steven J; Takemura, Kosuke; Zhang, Cathy X J; Hsu, Chih-Wei

    2015-02-01

    Our research utilized two popular theoretical conceptualizations of implicit self-esteem: 1) implicit self-esteem as a global automatic reaction to the self; and 2) implicit self-esteem as a context/domain specific construct. Under this framework, we present an extensive search for implicit self-esteem measure validity among different cultural groups (Study 1) and under several experimental manipulations (Study 2). In Study 1, Euro-Canadians (N = 107), Asian-Canadians (N = 187), and Japanese (N = 112) completed a battery of implicit self-esteem, explicit self-esteem, and criterion measures. Included implicit self-esteem measures were either popular or provided methodological improvements upon older methods. Criterion measures were sampled from previous research on implicit self-esteem and included self-report and independent ratings. In Study 2, Americans (N = 582) completed a shorter battery of these same types of measures under either a control condition, an explicit prime meant to activate the self-concept in a particular context, or prime meant to activate self-competence related implicit attitudes. Across both studies, explicit self-esteem measures far outperformed implicit self-esteem measures in all cultural groups and under all experimental manipulations. Implicit self-esteem measures are not valid for individual or cross-cultural comparisons. We speculate that individuals may not form implicit associations with the self as an attitudinal object. © 2013 Wiley Periodicals, Inc.

  9. The Premature Ejaculation Profile: validation of self-reported outcome measures for research and practice.

    Science.gov (United States)

    Patrick, Donald L; Giuliano, François; Ho, Kai Fai; Gagnon, Dennis D; McNulty, Pauline; Rothman, Margaret

    2009-02-01

    To evaluate the reliability and validity of the Premature Ejaculation Profile (PEP), a self-reported outcome instrument for evaluating domains of PE and its treatment, comprised of four single-item measures, a profile, and an index score. Data were from men participating in observational studies in the USA (PE, 207 men; non-PE, 1380) and Europe (PE, 201; non-PE, 914) and from men with PE (1238) participating in a phase III randomized, placebo-controlled clinical trial of dapoxetine. The PEP contains four measures: perceived control over ejaculation, personal distress related to ejaculation, satisfaction with sexual intercourse, and interpersonal difficulty related to ejaculation, each assessed on five-point response scales. Test-retest reliability, known-groups validity, and ability to detect a patient-reported global impression of change (PGI) in condition were evaluated for the individual PEP measures and a PEP index score (the mean of all four measures). Profile analysis was conducted using multivariate analysis of variance. All PEP measures showed acceptable reliability (intraclass correlation coefficients ranged from 0.66 to 0.83) and mean scores for all measures differed significantly between PE and non-PE groups (P measures. The PEP profiles of men with and without PE differed significantly (P measure for use in monitoring outcomes of men with PE.

  10. Development and initial validation of a measure of work, family, and school conflict.

    Science.gov (United States)

    Olson, Kristine J

    2014-01-01

    This study reports the development and initial validation of a theoretically based measure of conflict between work, family, and college student roles. The measure was developed through the assessment of construct definitions and an assessment of measurement items by subject matter experts. Then, the measurement items were assessed with data from 500 college students who were engaged in work and family responsibilities. The results indicate that conflict between work, family, and school are effectively measured by 12 factors assessing the direction of conflict (e.g., work-to-school conflict, and school-to-work conflict) as well as the form of conflict (i.e., time, strain, and behavior based conflict). Sets of exploratory and confirmatory factor analyses demonstrated that the 12 factors of the new measure are distinct from the 6 factors of the Carlson, Kacmar, and Williams (2000) work-family conflict measure. Criterion validity of the measure was established through a series of regression analyses testing hypothesized relationships between antecedent and outcome variables with role conflict. Results indicate that role demand was a robust predictor of role conflict. To extend the literature, core self-evaluations and emotional stability were established as predictors of role conflict. Further, work, family, and school role satisfaction were significantly impacted with the presence of role conflict between work, family, and school. PsycINFO Database Record (c) 2014 APA, all rights reserved.

  11. A reliable and valid questionnaire was developed to measure computer vision syndrome at the workplace.

    Science.gov (United States)

    Seguí, María del Mar; Cabrero-García, Julio; Crespo, Ana; Verdú, José; Ronda, Elena

    2015-06-01

    To design and validate a questionnaire to measure visual symptoms related to exposure to computers in the workplace. Our computer vision syndrome questionnaire (CVS-Q) was based on a literature review and validated through discussion with experts and performance of a pretest, pilot test, and retest. Content validity was evaluated by occupational health, optometry, and ophthalmology experts. Rasch analysis was used in the psychometric evaluation of the questionnaire. Criterion validity was determined by calculating the sensitivity and specificity, receiver operator characteristic curve, and cutoff point. Test-retest repeatability was tested using the intraclass correlation coefficient (ICC) and concordance by Cohen's kappa (κ). The CVS-Q was developed with wide consensus among experts and was well accepted by the target group. It assesses the frequency and intensity of 16 symptoms using a single rating scale (symptom severity) that fits the Rasch rating scale model well. The questionnaire has sensitivity and specificity over 70% and achieved good test-retest repeatability both for the scores obtained [ICC = 0.802; 95% confidence interval (CI): 0.673, 0.884] and CVS classification (κ = 0.612; 95% CI: 0.384, 0.839). The CVS-Q has acceptable psychometric properties, making it a valid and reliable tool to control the visual health of computer workers, and can potentially be used in clinical trials and outcome research. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Airborne Two-Micron Double-Pulse IPDA Lidar Validation for Carbon Dioxide Measurements Over Land

    Science.gov (United States)

    Refaat, Tamer F.; Singh, Upendra N.; Yu, Jirong; Petros, Mulugeta; Remus, Ruben; Ismail, Syed

    2018-04-01

    An airborne double-pulse 2-μm Integrated Path Differential Absorption (IPDA) lidar has been developed at NASA LaRC for measuring atmospheric CO2. IPDA was validated using NASA B-200 aircraft over land and ocean under different conditions. IPDA evaluation for land vegetation returns, during full day background conditions, are presented. IPDA CO2 measurements compare well with model results driven from on-board insitu sensor data. These results also indicate that CO2 measurement bias is consistent with that from ocean surface returns.

  13. Measuring patient activation in the Netherlands: translation and validation of the American short form Patient Activation Measure (PAM13

    Directory of Open Access Journals (Sweden)

    Rademakers Jany

    2012-07-01

    Full Text Available Abstract Background The American short form Patient Activation Measure (PAM is a 13-item instrument which assesses patient (or consumer self-reported knowledge, skills and confidence for self-management of one’s health or chronic condition. In this study the PAM was translated into a Dutch version; psychometric properties of the Dutch version were established and the instrument was validated in a panel of chronically ill patients. Methods The translation was done according to WHO guidelines. The PAM 13-Dutch was sent to 4178 members of the Dutch National Panel of people with Chronic illness or Disability (NPCD in April 2010 (study A and again to a sub sample of this group (N = 973 in June 2010 (study B. Internal consistency, test-retest reliability and cross-validation with the SBSQ-D (a measure for Health literacy were computed. The Dutch results were compared to similar Danish and American data. Results The psychometric properties of the PAM 13-Dutch were generally good. The level of internal consistency is good (α = 0.88 and item-rest correlations are moderate to strong. The Dutch mean PAM score (61.3 is comparable to the American (61.9 and lower than the Danish (64.2. The test-retest reliability was moderate. The association with Health literacy was weak to moderate. Conclusions The PAM-13 Dutch is a reliable instrument to measure patient activation. More research is needed into the validity of the Patient Activation Measure, especially with respect to a more comprehensive measure of Health literacy.

  14. Development and validation of a new questionnaire measuring treatment satisfaction in patients with non-valvular atrial fibrillation: SAFUCA®.

    Science.gov (United States)

    Ruiz, Miguel A; González-Porras, José Ramón; Aranguren, José Luis; Franco, Eduardo; Villasante, Fernando; Tuñón, José; González-López, Tomás José; de Salas-Cansado, Marina; Soto, Javier

    2017-03-01

    To develop a new questionnaire with good psychometric properties to measure satisfaction with medical care in patients with non-valvular atrial fibrillation. The initial instrument was composed of 37 items, arranged in 6 dimensions: efficacy, ease and convenience, impact on daily activities, satisfaction with medical care, undesired effects of medication, and overall satisfaction. Items and dimensions were extracted from reviewing existing instruments, 3 focus groups with chronic patients, and a panel of 8 experts. Additionally, 3 visual analog scales measuring quality of life, effectiveness, and overall satisfaction were administered. A convenience sample of 119 patients was used for item reduction. Classic psychometric theory and item analysis techniques were used (exploratory factor and confirmatory factor analysis, test-retest, and correlation with visual scales). A validation sample of 230 patients was used to assess convergent validity, and an additional 220 patients sample was used to discriminate between treatment and compliance groups. The questionnaire was reduced in length to 25 items, but the impact dimension had split in treatment inconvenience and treatment control. Overall reliability was high (α = 0.861) with acceptable dimensional reliabilities (α = 0.764-0.908). Individual dimensions correlated to varying degrees. Test-retest correlations were high (r = 0.784-0.965), and correlations with visual and already validated scales were substantial. Differences were detected between antivitamin K and new-oral-anticoagulant treatments in several dimensions (p satisfaction was related with compliance. This new 25-item questionnaire has good psychometric properties for measuring satisfaction with medical care in patients with this condition. It is capable of detecting differences between different treatments.

  15. Storage of compressed air - Optimisation and measurement of an existing project example; Druckluftspeicherung: Optimierung / Ausmessung bestehendes Projektmuster

    Energy Technology Data Exchange (ETDEWEB)

    Brueckmann, P. [Brueckmann Elektronik, Davos Dorf (Switzerland); Cyphelly, I. [Cyphelly and Cie, Les Brenets (Switzerland)

    2007-06-15

    This short final report for the Swiss Federal Office of Energy (SFOE) deals with an additional project that augmented an earlier report on a compressed-air energy storage system. First tests are reported on that revealed that the chosen heat exchanger fulfils the thermal expectations with substantial reserves. Certain effects concerning the liquid piston system are described which showed that further development of the test infrastructure were required. This project was launched to further examine these problems. Difficulties with the liquids available which prohibited the intended exact series of measurements are commented on. The authors note that independent investigations by the Austrian company LINDE came to the same conclusions, thus confirming the function of the heat exchanger.

  16. Foundations of Modern Legal Thought: the Primacy of Right and the Form of Validity as the Mode of Existence of Law

    Directory of Open Access Journals (Sweden)

    Afredo Bergés

    2013-12-01

    Full Text Available The aim of the present article is to show the specificity of the modern legal thought that elevates the activity of free will to the principle of law. Since the ultimate source of all normativity, according to the pre-modern legal thought, lies beyond human activity, man is considered to be under a givenobligation towards the source from which all rights and duties originate: «nature» imposes its law uponman. Such a pre-modern grounding of norms immediately opens up the possibility of denying one anyright (slavery if one has not full filled their fundamental duty. When traditional sources of normativity lose their efficiency and credibility, it becomes necessary to resort to an immanent principle: the activity of the autonomous subject. This principle is the true foundation of the «original, inalienable right» of man. Law isa construction that is valid only insofar as it is an adequate actualization of the concept of freedom.

  17. Development and validation of an instrument to measure nurse educator perceived confidence in clinical teaching.

    Science.gov (United States)

    Nguyen, Van N B; Forbes, Helen; Mohebbi, Mohammadreza; Duke, Maxine

    2017-12-01

    Teaching nursing in clinical environments is considered complex and multi-faceted. Little is known about the role of the clinical nurse educator, specifically the challenges related to transition from clinician, or in some cases, from newly-graduated nurse to that of clinical nurse educator, as occurs in developing countries. Confidence in the clinical educator role has been associated with successful transition and the development of role competence. There is currently no valid and reliable instrument to measure clinical nurse educator confidence. This study was conducted to develop and psychometrically test an instrument to measure perceived confidence among clinical nurse educators. A multi-phase, multi-setting survey design was used. A total of 468 surveys were distributed, and 363 were returned. Data were analyzed using exploratory and confirmatory factor analyses. The instrument was successfully tested and modified in phase 1, and factorial validity was subsequently confirmed in phase 2. There was strong evidence of internal consistency, reliability, content, and convergent validity of the Clinical Nurse Educator Skill Acquisition Assessment instrument. The resulting instrument is applicable in similar contexts due to its rigorous development and validation process. © 2017 The Authors. Nursing & Health Sciences published by John Wiley & Sons Australia, Ltd.

  18. A comparison of measurements and calculations for the Stripa validation drift inflow experiment

    International Nuclear Information System (INIS)

    Hodgkinson, D.P.; Cooper, N.S.

    1992-01-01

    This data presents a comparison of measurements and predictions for groundwater flow to the validation drift and remaining portions of the D-holes in the Site Characterisation and Validation (SCV) block. The comparison was carried out of behalf of the Stripa task force on fracture flow modelling. The paper summarises the characterisation data and their preliminary interpretation, and reviews the fracture flow modelling approaches and predictions made by teams from AEA Technology/Fracflow, Golder Associated and Lawrence Berkely Laboratory. The predictions are compared with the inflow measurements on the basis of the validation process and criteria defined by the Task Force. The results of all three modelling groups meet the validation criteria, with the predictions of the inflow being of the same order of magnitude as the observations. Also the AEA/Fracflow and Golder approaches allow the inflow pattern to be predicted and this too is reproduced with reasonable accuracy. The successful completion of this project demonstrates the feasibility of discrete fracture flow modelling, and in particular the ability to collect and analyse all the necessary characterization data in a timely and economic manner. (32 refs.) (au)

  19. Validation and measurement uncertainty estimation in food microbiology: differences between quantitative and qualitative methods

    Directory of Open Access Journals (Sweden)

    Vesna Režić Dereani

    2010-09-01

    Full Text Available The aim of this research is to describe quality control procedures, procedures for validation and measurement uncertainty (MU determination as an important element of quality assurance in food microbiology laboratory for qualitative and quantitative type of analysis. Accreditation is conducted according to the standard ISO 17025:2007. General requirements for the competence of testing and calibration laboratories, which guarantees the compliance with standard operating procedures and the technical competence of the staff involved in the tests, recently are widely introduced in food microbiology laboratories in Croatia. In addition to quality manual introduction, and a lot of general documents, some of the most demanding procedures in routine microbiology laboratories are measurement uncertainty (MU procedures and validation experiment design establishment. Those procedures are not standardized yet even at international level, and they require practical microbiological knowledge, altogether with statistical competence. Differences between validation experiments design for quantitative and qualitative food microbiology analysis are discussed in this research, and practical solutions are shortly described. MU for quantitative determinations is more demanding issue than qualitative MU calculation. MU calculations are based on external proficiency testing data and internal validation data. In this paper, practical schematic descriptions for both procedures are shown.

  20. AULA virtual reality test as an attention measure: convergent validity with Conners' Continuous Performance Test.

    Science.gov (United States)

    Díaz-Orueta, Unai; Garcia-López, Cristina; Crespo-Eguílaz, Nerea; Sánchez-Carpintero, Rocío; Climent, Gema; Narbona, Juan

    2014-01-01

    The majority of neuropsychological tests used to evaluate attention processes in children lack ecological validity. The AULA Nesplora (AULA) is a continuous performance test, developed in a virtual setting, very similar to a school classroom. The aim of the present study is to analyze the convergent validity between the AULA and the Continuous Performance Test (CPT) of Conners. The AULA and CPT were administered correlatively to 57 children, aged 6-16 years (26.3% female) with average cognitive ability (IQ mean = 100.56, SD = 10.38) who had a diagnosis of attention deficit/hyperactivity disorder (ADHD) according to DSM-IV-TR criteria. Spearman correlations analyses were conducted among the different variables. Significant correlations were observed between both tests in all the analyzed variables (omissions, commissions, reaction time, and variability of reaction time), including for those measures of the AULA based on different sensorial modalities, presentation of distractors, and task paradigms. Hence, convergent validity between both tests was confirmed. Moreover, the AULA showed differences by gender and correlation to Perceptual Reasoning and Working Memory indexes of the WISC-IV, supporting the relevance of IQ measures in the understanding of cognitive performance in ADHD. In addition, the AULA (but not Conners' CPT) was able to differentiate between ADHD children with and without pharmacological treatment for a wide range of measures related to inattention, impulsivity, processing speed, motor activity, and quality of attention focus. Additional measures and advantages of the AULA versus Conners' CPT are discussed.

  1. Validation of the Cognitive Assessment of Later Life Status (CALLS instrument: a computerized telephonic measure

    Directory of Open Access Journals (Sweden)

    Parsons Thomas D

    2007-05-01

    Full Text Available Abstract Background Brief screening tests have been developed to measure cognitive performance and dementia, yet they measure limited cognitive domains and often lack construct validity. Neuropsychological assessments, while comprehensive, are too costly and time-consuming for epidemiological studies. This study's aim was to develop a psychometrically valid telephone administered test of cognitive function in aging. Methods Using a sequential hierarchical strategy, each stage of test development did not proceed until specified criteria were met. The 30 minute Cognitive Assessment of Later Life Status (CALLS measure and a 2.5 hour in-person neuropsychological assessment were conducted with a randomly selected sample of 211 participants 65 years and older that included equivalent distributions of men and women from ethnically diverse populations. Results Overall Cronbach's coefficient alpha for the CALLS test was 0.81. A principal component analysis of the CALLS tests yielded five components. The CALLS total score was significantly correlated with four neuropsychological assessment components. Older age and having a high school education or less was significantly correlated with lower CALLS total scores. Females scored better overall than males. There were no score differences based on race. Conclusion The CALLS test is a valid measure that provides a unique opportunity to reliably and efficiently study cognitive function in large populations.

  2. Development and initial validation of a brief self-report measure of cognitive dysfunction in fibromyalgia.

    Science.gov (United States)

    Kratz, Anna L; Schilling, Stephen G; Goesling, Jenna; Williams, David A

    2015-06-01

    Pain is often the focus of research and clinical care in fibromyalgia (FM); however, cognitive dysfunction is also a common, distressing, and disabling symptom in FM. Current efforts to address this problem are limited by the lack of a comprehensive, valid measure of subjective cognitive dysfunction in FM that is easily interpretable, accessible, and brief. The purpose of this study was to leverage cognitive functioning item banks that were developed as part of the Patient Reported Outcomes Measurement Information System (PROMIS) to devise a 10-item short form measure of cognitive functioning for use in FM. In study 1, a nationwide (U.S.) sample of 1,035 adults with FM (age range = 18-82, 95.2% female) completed 2 cognitive item pools. Factor analyses and item response theory analyses were used to identify dimensionality and optimally performing items. A recommended 10-item measure, called the Multidimensional Inventory of Subjective Cognitive Impairment (MISCI) was created. In study 2, 232 adults with FM completed the MISCI and a legacy measure of cognitive functioning that is used in FM clinical trials, the Multiple Ability Self-Report Questionnaire (MASQ). The MISCI showed excellent internal reliability, low ceiling/floor effects, and good convergent validity with the MASQ (r = -.82). This paper presents the MISCI, a 10-item measure of cognitive dysfunction in FM, developed through classical test theory and item response theory. This brief but comprehensive measure shows evidence of excellent construct validity through large correlations with a lengthy legacy measure of cognitive functioning. Copyright © 2015 American Pain Society. Published by Elsevier Inc. All rights reserved.

  3. Validation of a photography-based goniometry method for measuring joint range of motion.

    Science.gov (United States)

    Blonna, Davide; Zarkadas, Peter C; Fitzsimmons, James S; O'Driscoll, Shawn W

    2012-01-01

    A critical component of evaluating the outcomes after surgery to restore lost elbow motion is the range of motion (ROM) of the elbow. This study examined if digital photography-based goniometry is as accurate and reliable as clinical goniometry for measuring elbow ROM. Instrument validity and reliability for photography-based goniometry were evaluated for a consecutive series of 50 elbow contractures by 4 observers with different levels of elbow experience. Goniometric ROM measurements were taken with the elbows in full extension and full flexion directly in the clinic (once) and from digital photographs (twice in a blinded random manner). Instrument validity for photography-based goniometry was extremely high (intraclass correlation coefficient: extension = 0.98, flexion = 0.96). For extension and flexion measurements by the expert surgeon, systematic error was negligible (0° and 1°, respectively). Limits of agreement were 7° (95% confidence interval [CI], 5° to 9°) and -7° (95% CI, -5° to -9°) for extension and 8° (95% CI, 6° to 10°) and -7° (95% CI, -5° to -9°) for flexion. Interobserver reliability for photography-based goniometry was better than that for clinical goniometry. The least experienced observer's photographic goniometry measurements were closer to the reference measurements than the clinical goniometry measurements. Photography-based goniometry is accurate and reliable for measuring elbow ROM. The photography-based method relied less on observer expertise than clinical goniometry. This validates an objective measure of patient outcome without requiring doctor-patient contact at a tertiary care center, where most contracture surgeries are done. Copyright © 2012 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Mosby, Inc. All rights reserved.

  4. Development and validation of a questionnaire to measure moral distress in community pharmacists.

    Science.gov (United States)

    Astbury, Jayne L; Gallagher, Cathal T

    2017-02-01

    Background Pharmacists work within a highly-regulated occupational sphere, and are bound by strict legal frameworks and codes of professional conduct. This regulatory environment creates the potential for moral distress to occur due to the limitations it places on acting in congruence with moral judgements. Very little research regarding this phenomenon has been undertaken in pharmacy: thus, prominent research gaps have arisen for the development of a robust tool to measure and quantify moral distress experienced in the profession. Objective The aim of this study was to develop an instrument to measure moral distress in community pharmacists. Setting Community pharmacies in the United Kingdom. Method This study adopted a three-phase exploratory sequential mixed-method design. Three semi-structured focus groups were then conducted to allow pharmacists to identify and explore scenarios that cause moral distress. Each of the identified scenarios were developed into a statement, which was paired with twin seven-point Likert scales to measure the frequency and intensity of the distress, respectively. Content validity, reliability, and construct validity were all tested, and the questionnaire was refined. Main outcome measure The successful development of the valid instrument for use in the United Kingdom. Results This research has led to the development of a valid and reliable instrument to measure moral distress in community pharmacists in the UK. The questionnaire has already been distributed to a large sample of community pharmacists. Conclusion Results from this distribution will be used to inform the formulation of coping strategies for dealing with moral distress.

  5. Validation, verification and evaluation of a Train to Train Distance Measurement System by means of Colored Petri Nets

    International Nuclear Information System (INIS)

    Song, Haifeng; Liu, Jieyu; Schnieder, Eckehard

    2017-01-01

    Validation, verification and evaluation are necessary processes to assure the safety and functionality of a system before its application in practice. This paper presents a Train to Train Distance Measurement System (TTDMS), which can provide distance information independently from existing onboard equipment. Afterwards, we proposed a new process using Colored Petri Nets to verify the TTDMS system functional safety, as well as to evaluate the system performance. Three main contributions are carried out in the paper: Firstly, this paper proposes a formalized TTDMS model, and the model correctness is validated using state space analysis and simulation-based verification. Secondly, corresponding checking queries are proposed for the purpose of functional safety verification. Further, the TTDMS performance is evaluated by applying parameters in the formal model. Thirdly, the reliability of a functional prototype TTDMS is estimated. It is found that the procedure can cooperate with the system development, and both formal and simulation-based verifications are performed. Using our process to evaluate and verify a system is easier to read and more reliable compared to executable code and mathematical methods. - Highlights: • A new Train to Train Distance Measurement System. • New approach verifying system functional safety and evaluating system performance by means of CPN. • System formalization using the system property concept. • Verification of system functional safety using state space analysis. • Evaluation of system performance applying simulation-based analysis.

  6. Measuring walking within and outside the neighborhood in Chinese elders: reliability and validity

    Directory of Open Access Journals (Sweden)

    Cerin Ester

    2011-11-01

    Full Text Available Abstract Background Walking is a preferred, prevalent and recommended activity for aging populations and is influenced by the neighborhood built environment. To study this influence it is necessary to differentiate whether walking occurs within or outside of the neighborhood. The Neighborhood Physical Activity Questionnaire (NPAQ collects information on setting-specific physical activity, including walking, inside and outside one's neighborhood. While the NPAQ has shown to be a reliable measure in adults, its reliability in older adults is unknown. Additionally its validity and the influence of type of neighborhood on reliability and validity have yet to be explored. Methods The NPAQ walking component was adapted for Chinese speaking elders (NWQ-CS. Ninety-six Chinese elders, stratified by social economic status and neighborhood walkability, wore an accelerometer and completed a log of walks for 7 days. Following the collection of valid data the NWQ-CS was interviewer-administered. Fourteen to 20 days (average of 17 days later the NWQ-CS was re-administered. Test-retest reliability and validity of the NWQ-CS were assessed. Results Reliability and validity estimates did not differ with type of neighborhood. NWQ-CS measures of walking showed moderate to excellent reliability. Reliability was generally higher for estimates of weekly frequency than minutes of walking. Total weekly minutes of walking were moderately related to all accelerometry measures. Moderate-to-strong associations were found between the NWQ-CS and log-of-walks variables. The NWQ-CS yielded statistically significantly lower mean values of total walking, weekly minutes of walking for transportation and weekly frequency of walking for transportation outside the neighborhood than the log-of-walks. Conclusions The NWQ-CS showed measurement invariance across types of neighborhoods. It is a valid measure of walking for recreation and frequency of walking for transport. However, it may

  7. Development and validation of parenting measures for body image and eating patterns in childhood.

    Science.gov (United States)

    Damiano, Stephanie R; Hart, Laura M; Paxton, Susan J

    2015-01-01

    Evidence-based parenting interventions are important in assisting parents to help their children develop healthy body image and eating patterns. To adequately assess the impact of parenting interventions, valid parent measures are required. The aim of this study was to develop and assess the validity and reliability of two new parent measures, the Parenting Intentions for Body image and Eating patterns in Childhood (Parenting Intentions BEC) and the Knowledge Test for Body image and Eating patterns in Childhood (Knowledge Test BEC). Participants were 27 professionals working in research or clinical treatment of body dissatisfaction or eating disorders, and 75 parents of children aged 2-6 years, who completed the measures via an online questionnaire. Seven scenarios were developed for the Parenting Intentions BEC to describe common experiences about the body and food that parents might need to respond to in front of their child. Parents ranked four behavioural intentions, derived from the current literature on parenting risk factors for body dissatisfaction and unhealthy eating patterns in children. Two subscales were created, one representing positive behavioural intentions, the other negative behavioural intentions. After piloting a larger pool of items, 13 statements were used to construct the Knowledge Test BEC. These were designed to be factual statements about the influence of parent language, media, family meals, healthy eating, and self-esteem on child eating and body image. The validity of both measures was tested by comparing parent and professional scores, and reliability was assessed by comparing parent scores over two testing occasions. Compared with parents, professionals reported significantly higher scores on the Positive Intentions subscale and significantly lower on the Negative Intentions subscale of the Parenting Intentions BEC; confirming the discriminant validity of six out of the seven scenarios. Test-retest reliability was also confirmed as

  8. Identification of validated questionnaires to measure adherence to pharmacological antihypertensive treatments

    Science.gov (United States)

    Pérez-Escamilla, Beatriz; Franco-Trigo, Lucía; Moullin, Joanna C; Martínez-Martínez, Fernando; García-Corpas, José P

    2015-01-01

    Background Low adherence to pharmacological treatments is one of the factors associated with poor blood pressure control. Questionnaires are an indirect measurement method that is both economic and easy to use. However, questionnaires should meet specific criteria, to minimize error and ensure reproducibility of results. Numerous studies have been conducted to design questionnaires that quantify adherence to pharmacological antihypertensive treatments. Nevertheless, it is unknown whether questionnaires fulfil the minimum requirements of validity and reliability. The aim of this study was to compile validated questionnaires measuring adherence to pharmacological antihypertensive treatments that had at least one measure of validity and one measure of reliability. Methods A literature search was undertaken in PubMed, the Excerpta Medica Database (EMBASE), and the Latin American and Caribbean Health Sciences Literature database (Literatura Latino-Americana e do Caribe em Ciências da Saúde [LILACS]). References from included articles were hand-searched. The included papers were all that were published in English, French, Portuguese, and Spanish from the beginning of the database’s indexing until July 8, 2013, where a validation of a questionnaire (at least one demonstration of the validity and at least one of reliability) was performed to measure adherence to antihypertensive pharmacological treatments. Results A total of 234 potential papers were identified in the electronic database search; of these, 12 met the eligibility criteria. Within these 12 papers, six questionnaires were validated: the Morisky–Green–Levine; Brief Medication Questionnaire; Hill-Bone Compliance to High Blood Pressure Therapy Scale; Morisky Medication Adherence Scale; Treatment Adherence Questionnaire for Patients with Hypertension (TAQPH); and Martín–Bayarre–Grau. Questionnaire length ranged from four to 28 items. Internal consistency, assessed by Cronbach’s α, varied from 0

  9. Measuring couple relationship quality in a rural African population: Validation of a Couple Functionality Assessment Tool in Malawi.

    Directory of Open Access Journals (Sweden)

    Allison Ruark

    Full Text Available Available data suggest that individual and family well-being are linked to the quality of women's and men's couple relationships, but few tools exist to assess couple relationship functioning in low- and middle-income countries. In response to this gap, Catholic Relief Services has developed a Couple Functionality Assessment Tool (CFAT to capture valid and reliable data on various domains of relationship quality. This tool is designed to be used by interventions which aim to improve couple and family well-being as a means of measuring the effectiveness of these interventions, particularly related to couple relationship quality. We carried out a validation study of the CFAT among 401 married and cohabiting adults (203 women and 198 men in rural Chikhwawa District, Malawi. Using psychometric scales, the CFAT addressed six domains of couple relationship quality (intimacy, partner support, sexual satisfaction, gender roles, decision-making, and communication and conflict management, and included questions on intimate partner violence. We used exploratory factor analysis to assess scale performance of each domain and produce a shortened Relationship Quality Index (RQI composed of items from five relationship quality domains. This article reports the performance of the RQI. Internal reliability and validity of the RQI were found to be good. Regression analyses examined the relationship of the RQI to outcomes important to health and development: intra-household cooperation, positive health behaviors, intimate partner violence, and gender-equitable norms. We found many significant correlations between RQI scores and these couple- and family-level development issues. There is a need to further validate the tool with use in other populations as well as to continue to explore whether the observed linkages between couple functionality and development outcomes are causal relationships.

  10. Patients' and observers' perceptions of involvement differ. Validation study on inter-relating measures for shared decision making.

    Directory of Open Access Journals (Sweden)

    Jürgen Kasper

    Full Text Available OBJECTIVE: Patient involvement into medical decisions as conceived in the shared decision making method (SDM is essential in evidence based medicine. However, it is not conclusively evident how best to define, realize and evaluate involvement to enable patients making informed choices. We aimed at investigating the ability of four measures to indicate patient involvement. While use and reporting of these instruments might imply wide overlap regarding the addressed constructs this assumption seems questionable with respect to the diversity of the perspectives from which the assessments are administered. METHODS: The study investigated a nested cohort (N = 79 of a randomized trial evaluating a patient decision aid on immunotherapy for multiple sclerosis. Convergent validities were calculated between observer ratings of videotaped physician-patient consultations (OPTION and patients' perceptions of the communication (Shared Decision Making Questionnaire, Control Preference Scale & Decisional Conflict Scale. RESULTS: OPTION reliability was high to excellent. Communication performance was low according to OPTION and high according to the three patient administered measures. No correlations were found between observer and patient judges, neither for means nor for single items. Patient report measures showed some moderate correlations. CONCLUSION: Existing SDM measures do not refer to a single construct. A gold standard is missing to decide whether any of these measures has the potential to indicate patient involvement. PRACTICE IMPLICATIONS: Pronounced heterogeneity of the underpinning constructs implies difficulties regarding the interpretation of existing evidence on the efficacy of SDM. Consideration of communication theory and basic definitions of SDM would recommend an inter-subjective focus of measurement. TRIAL REGISTRATION: Controlled-Trials.com ISRCTN25267500.

  11. Developing and validating an instrument for measuring mobile computing self-efficacy.

    Science.gov (United States)

    Wang, Yi-Shun; Wang, Hsiu-Yuan

    2008-08-01

    IT-related self-efficacy has been found to have a critical influence on system use. However, traditional measures of computer self-efficacy and Internet-related self-efficacy are perceived to be inapplicable in the context of mobile computing and commerce because they are targeted primarily at either desktop computer or wire-based technology contexts. Based on previous research, this study develops and validates a multidimensional instrument for measuring mobile computing self-efficacy (MCSE). This empirically validated instrument will be useful to researchers in developing and testing the theories of mobile user behavior, and to practitioners in assessing the mobile computing self-efficacy of users and promoting the use of mobile commerce systems.

  12. Validation of Cs-137 measurement in food samples using gamma spectrometry system

    International Nuclear Information System (INIS)

    Yii Mei Wo; Kamarozaman Ishak

    2005-01-01

    Cs-137 was found to be one of major radionuclide contaminant present in foods consumed by human. In some countries, regulations required consumption foods moving in international trade to be scanned for caesium (Cs-134 and Cs-137) to ensure it does not exceeding the maximum permissible level. This is to ensure that the intake of such foods will not accumulate radionuclide until the significant level inside the human body. Gamma Spectrometry System was used to perform the measurement of caesium isotopes, because it was one of the easiest methods to be performed. This measuring method must be validated for several parameters include specificity, precision (repeatability), bias (accuracy), linearity, range, detection limit, robustness and ruggedness in order to ensure it is fit for the purpose. This paper would summarise how these parameters were fulfilled for this analytical method using several types certified reference materials. The same validated method would be considered workable on Cs-134 as well. (Author)

  13. Development and validation of the Spanish version of the Team Climate Inventory: a measurement invariance test

    Directory of Open Access Journals (Sweden)

    Mirko Antino

    2014-05-01

    Full Text Available The present study analyzed the psychometric properties and the validity of the Spanish version of the Team Climate Inventory (TCI. The TCI is a measure of climate for innovation within groups at work and is based on the four-factor theory of climate for innovation (West, 1990. Cronbach's alpha and omega indexes revealed satisfactory reliabilities and exploratory factor analysis extracted the four original factors with the fifth factor as reported in other studies. Confirmatory factorial analysis confirmed that the five-factor solution presented the best fit to our data. Two samples (Spanish health care teams and Latin American software development teams for a total of 1099 participants were compared, showing metric measurement invariance. Evidences for validity based on team performance and team satisfaction prediction are offered.

  14. The Measurement of Entrepreneurial Outsourcing: Preliminary Scale Development, Dimensionality Assessment, and Construct Validation

    Directory of Open Access Journals (Sweden)

    Ali Davari

    2015-08-01

    Full Text Available Studying the outsourcing concept, as a strategy for efficient and effective business management, has been implemented less in the field of entrepreneurship. Accordingly, the present study aims to develop a measurement instrument for measuring entrepreneurial outsourcing construct utilizing empirical evidence in Iran’s telecommunications and automotive industries. Employing a sample of 203 senior managers and executive experts of companies operating in these industries, the gathered data were analyzed using PLS-SEM method. According to our results, the proposed scale of entrepreneurial outsourcing comprises six dimensions: strategic factors, economical factors, technological factors, task specifications, risk relating factors, and entrepreneurial performance. Moreover, the scale enjoys sufficient multidimensionality, reliability, and construct validity in terms of convergent and discriminate validity.

  15. Validation of meter-scale surface faulting offset measurements from high-resolution topographic data

    Science.gov (United States)

    Salisbury, Barrett; Haddad, D.E.; Rockwell, T.K.; Arrowsmith, R.; Madugo, C.; Zielke, O.; Scharer, Katherine M.

    2015-01-01

    Studies of active fault zones have flourished with the availability of high-resolution topographic data, particularly where airborne light detection and ranging (lidar) and structure from motion (SfM) data sets provide a means to remotely analyze submeter-scale fault geomorphology. To determine surface offset at a point along a strike-slip earthquake rupture, geomorphic features (e.g., stream channels) are measured days to centuries after the event. Analysis of these and cumulatively offset features produces offset distributions for successive earthquakes that are used to understand earthquake rupture behavior. As researchers expand studies to more varied terrain types, climates, and vegetation regimes, there is an increasing need to standardize and uniformly validate measurements of tectonically displaced geomorphic features. A recently compiled catalog of nearly 5000 earthquake offsets across a range of measurement and reporting styles provides insight into quality rating and uncertainty trends from which we formulate best-practice and reporting recommendations for remote studies. In addition, a series of public and beginner-level studies validate the remote methodology for a number of tools and emphasize considerations to enhance measurement accuracy and precision for beginners and professionals. Our investigation revealed that (1) standardizing remote measurement methods and reporting quality rating schemes is essential for the utility and repeatability of fault-offset measurements; (2) measurement discrepancies often involve misinterpretation of the offset geomorphic feature and are a function of the investigator’s experience; (3) comparison of measurements made by a single investigator in different climatic regions reveals systematic differences in measurement uncertainties attributable to variation in feature preservation; (4) measuring more components of a displaced geomorphic landform produces more consistently repeatable estimates of offset; and (5

  16. Validation of meter-scale surface faulting offset measurements from high-resolution topographic data

    KAUST Repository

    Salisbury, J. Barrett

    2015-10-24

    Studies of active fault zones have flourished with the availability of high-resolution topographic data, particularly where airborne light detection and ranging (lidar) and structure from motion (SfM) data sets provide a means to remotely analyze submeter- scale fault geomorphology. To determine surface offset at a point along a strike-slip earthquake rupture, geomorphic features (e.g., stream channels) are measured days to centuries after the event. Analysis of these and cumulatively offset features produces offset distributions for successive earthquakes that are used to understand earthquake rupture behavior. As researchers expand studies to more varied terrain types, climates, and vegetation regimes, there is an increasing need to standardize and uniformly validate measurements of tectonically displaced geomorphic features. A recently compiled catalog of nearly 5000 earthquake offsets across a range of measurement and reporting styles provides insight into quality rating and uncertainty trends from which we formulate best-practice and reporting recommendations for remote studies. In addition, a series of public and beginner-level studies validate the remote methodology for a number of tools and emphasize considerations to enhance measurement accuracy and precision for beginners and professionals. Our investigation revealed that (1) standardizing remote measurement methods and reporting quality rating schemes is essential for the utility and repeatability of fault-offset measurements; (2) measurement discrepancies often involve misinterpretation of the offset geomorphic feature and are a function of the investigator\\'s experience; (3) comparison of measurements made by a single investigator in different climatic regions reveals systematic differences in measurement uncertainties attributable to variation in feature preservation; (4) measuring more components of a displaced geomorphic landform produces more consistently repeatable estimates of offset; and (5

  17. The Perseverative Thinking Questionnaire (PTQ): validation of a content-independent measure of repetitive negative thinking

    NARCIS (Netherlands)

    Ehring, T.; Zetsche, U.; Weidacker, K.; Wahl, K.; Schönfeld, S.; Ehlers, A.

    2011-01-01

    Repetitive negative thinking (RNT) has been found to be involved in the maintenance of several types of emotional problems and has therefore been suggested to be a transdiagnostic process. However, existing measures of RNT typically focus on a particular disorder-specific content. In this article,

  18. Self-report questionnaire for measuring presence: Development and initial validation

    NARCIS (Netherlands)

    Kuis, E.; Goossensen, M.A.; van Dijke, J.; Baart, A.J.

    2014-01-01

    Background: The concept of ‘presence’ appears frequently in the literature and seems to be a highly relevant concept in discussing and evaluating quality of relations in healthcare practices. However, no existing self-report measure of presence for health professionals was found. Purpose: The

  19. Initial Development and Validation of the BullyHARM: The Bullying, Harassment, and Aggression Receipt Measure

    OpenAIRE

    Hall, William J.

    2016-01-01

    This article describes the development and preliminary validation of the Bullying, Harassment, and Aggression Receipt Measure (BullyHARM). The development of the BullyHARM involved a number of steps and methods, including a literature review, expert review, cognitive testing, readability testing, data collection from a large sample, reliability testing, and confirmatory factor analysis. A sample of 275 middle school students was used to examine the psychometric properties and factor structure...

  20. Reliability and concurrent validity of postural asymmetry measurement in adolescent idiopathic scoliosis.

    Science.gov (United States)

    Prowse, Ashleigh; Aslaksen, Berit; Kierkegaard, Marie; Furness, James; Gerdhem, Paul; Abbott, Allan

    2017-01-18

    To investigate the reliability and concurrent validity of the Baseline ® Body Level/Scoliosis meter for adolescent idiopathic scoliosis postural assessment in three anatomical planes. This is an observational reliability and concurrent validity study of adolescent referrals to the Orthopaedic department for scoliosis screening at Karolinska University Hospital, Stockholm, Sweden between March-May 2012. A total of 31 adolescents with idiopathic scoliosis (13.6 ± 0.6 years old) of mild-moderate curvatures (25° ± 12°) were consecutively recruited. Measurement of cervical, thoracic and lumbar curvatures, pelvic and shoulder tilt, and axial thoracic rotation (ATR) were performed by two trained physiotherapists in one day. The intraclass correlation coefficient (ICC) was used to determine the inter-examiner reliability (ICC2,1) and the intra-rater reliability (ICC3,3) of the Baseline ® Body Level/Scoliosis meter. Spearman's correlation analyses were used to estimate concurrent validity between the Baseline ® Body Level/Scoliosis meter and Gold Standard Cobb angles from radiographs and the Orthopaedic Systems Inc. Scoliometer. There was excellent reliability between examiners for thoracic kyphosis (ICC2,1 = 0.94), ATR (ICC2,1 = 0.92) and lumbar lordosis (ICC2,1 = 0.79). There was adequate reliability between examiners for cervical lordosis (ICC2,1 = 0.51), however poor reliability for pelvic and shoulder tilt. Both devices were reproducible in the measurement of ATR when repeated by one examiner (ICC3,3 0.98-1.00). The device had a good correlation with the Scoliometer (rho = 0.78). When compared with Cobb angle from radiographs, there was a moderate correlation for ATR (rho = 0.627). The Baseline ® Body Level/Scoliosis meter provides reliable transverse and sagittal cervical, thoracic and lumbar measurements and valid transverse plan measurements of mild-moderate scoliosis deformity.

  1. Recent Progress Validating the HADES Model of LLNL's HEAF MicroCT Measurements

    Energy Technology Data Exchange (ETDEWEB)

    White, W. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bond, K. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lennox, K. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Aufderheide, M. B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Seetho, I. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Roberson, G. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-07-17

    This report compares recent HADES calculations of x-ray linear attenuation coefficients to previous MicroCT measurements made at Lawrence Livermore National Laboratory’s High Energy Applications Facility (HEAF). The chief objective is to investigate what impact recent changes in HADES modeling have on validation results. We find that these changes have no obvious effect on the overall accuracy of the model. Detailed comparisons between recent and previous results are presented.

  2. Questionnaire development and validity to measure sexual intention among youth in Malaysia

    OpenAIRE

    Noor Azimah Muhammad; Khadijah Shamsuddin; Rahmah Mohd Amin; Khairani Omar; Ramayah Thurasamy

    2017-01-01

    Background From the Theory of Planned Behaviour perspective, sexual intention is determined by a permissive attitude, perception of social norms and perceived self-efficacy in performing sexual activity. The aim of this study was to develop and validate the Youth Sexual Intention Questionnaire (YSI-Q), which was designed to measure sexual intention among youths in Malaysia. Methods A total of 25 items were developed based on literature reviews encompassing four main constructs: sexual intenti...

  3. Concurrent Validation of Experimental Army Enlisted Personnel Selection and Classification Measures

    Science.gov (United States)

    2007-08-01

    Megan Shay, Mary Warthen, Gordon Waugh, and Shelly West. 3 The samples sizes in Table 2.1 represent the number of participants who completed Soldier...scores. This finding casts serious doubt on a fundamental assumption underlying the construction and validation of interest-based P-E fit measures... cast on dominant arm, using other arm to respond). The final sample size was 755. Psychometric Properties Table 12.1 reports the means, standard

  4. Development and validation of the Spanish version of the Team Climate Inventory: a measurement invariance test

    OpenAIRE

    Mirko Antino; Francisco Gil Rodriguez; Margarita Martí Ripoll; Angel Barrasa; Stefano Borzillo

    2014-01-01

    The present study analyzed the psychometric properties and the validity of the Spanish version of the Team Climate Inventory (TCI). The TCI is a measure of climate for innovation within groups at work and is based on the four-factor theory of climate for innovation (West, 1990). Cronbach's alpha and omega indexes revealed satisfactory reliabilities and exploratory factor analysis extracted the four original factors with the fifth factor as reported in other studies. Confirmatory factorial ana...

  5. Reliability and validity of an internet-based questionnaire measuring lifetime physical activity.

    Science.gov (United States)

    De Vera, Mary A; Ratzlaff, Charles; Doerfling, Paul; Kopec, Jacek

    2010-11-15

    Lifetime exposure to physical activity is an important construct for evaluating associations between physical activity and disease outcomes, given the long induction periods in many chronic diseases. The authors' objective in this study was to evaluate the measurement properties of the Lifetime Physical Activity Questionnaire (L-PAQ), a novel Internet-based, self-administered instrument measuring lifetime physical activity, among Canadian men and women in 2005-2006. Reliability was examined using a test-retest study. Validity was examined in a 2-part study consisting of 1) comparisons with previously validated instruments measuring similar constructs, the Lifetime Total Physical Activity Questionnaire (LT-PAQ) and the Chasan-Taber Physical Activity Questionnaire (CT-PAQ), and 2) a priori hypothesis tests of constructs measured by the L-PAQ. The L-PAQ demonstrated good reliability, with intraclass correlation coefficients ranging from 0.67 (household activity) to 0.89 (sports/recreation). Comparison between the L-PAQ and the LT-PAQ resulted in Spearman correlation coefficients ranging from 0.41 (total activity) to 0.71 (household activity); comparison between the L-PAQ and the CT-PAQ yielded coefficients of 0.58 (sports/recreation), 0.56 (household activity), and 0.50 (total activity). L-PAQ validity was further supported by observed relations between the L-PAQ and sociodemographic variables, consistent with a priori hypotheses. Overall, the L-PAQ is a useful instrument for assessing multiple domains of lifetime physical activity with acceptable reliability and validity.

  6. Generator Dynamic Model Validation and Parameter Calibration Using Phasor Measurements at the Point of Connection

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhenyu; Du, Pengwei; Kosterev, Dmitry; Yang, Steve

    2013-05-01

    Disturbance data recorded by phasor measurement units (PMU) offers opportunities to improve the integrity of dynamic models. However, manually tuning parameters through play-back events demands significant efforts and engineering experiences. In this paper, a calibration method using the extended Kalman filter (EKF) technique is proposed. The formulation of EKF with parameter calibration is discussed. Case studies are presented to demonstrate its validity. The proposed calibration method is cost-effective, complementary to traditional equipment testing for improving dynamic model quality.

  7. Measuring leprosy-related stigma - a pilot study to validate a toolkit of instruments.

    Science.gov (United States)

    Rensen, Carin; Bandyopadhyay, Sudhakar; Gopal, Pala K; Van Brakel, Wim H

    2011-01-01

    Stigma negatively affects the quality of life of leprosy-affected people. Instruments are needed to assess levels of stigma and to monitor and evaluate stigma reduction interventions. We conducted a validation study of such instruments in Tamil Nadu and West Bengal, India. Four instruments were tested in a 'Community Based Rehabilitation' (CBR) setting, the Participation Scale, Internalised Scale of Mental Illness (ISMI) adapted for leprosy-affected persons, Explanatory Model Interview Catalogue (EMIC) for leprosy-affected and non-affected persons and the General Self-Efficacy (GSE) Scale. We evaluated the following components of validity, construct validity, internal consistency, test-retest reproducibility and reliability to distinguish between groups. Construct validity was tested by correlating instrument scores and by triangulating quantitative and qualitative findings. Reliability was evaluated by comparing levels of stigma among people affected by leprosy and community controls, and among affected people living in CBR project areas and those in non-CBR areas. For the Participation, ISMI and EMIC scores significant differences were observed between those affected by leprosy and those not affected (p = 0.0001), and between affected persons in the CBR and Control group (p < 0.05). The internal consistency of the instruments measured with Cronbach's α ranged from 0.83 to 0.96 and was very good for all instruments. Test-retest reproducibility coefficients were 0.80 for the Participation score, 0.70 for the EMIC score, 0.62 for the ISMI score and 0.50 for the GSE score. The construct validity of all instruments was confirmed. The Participation and EMIC Scales met all validity criteria, but test-retest reproducibility of the ISMI and GSE Scales needs further evaluation with a shorter test-retest interval and longer training and additional adaptations for the latter.

  8. Validity of a smartphone protractor to measure sagittal parameters in adult spinal deformity.

    Science.gov (United States)

    Kunkle, William Aaron; Madden, Michael; Potts, Shannon; Fogelson, Jeremy; Hershman, Stuart

    2017-10-01

    Smartphones have become an integral tool in the daily life of health-care professionals (Franko 2011). Their ease of use and wide availability often make smartphones the first tool surgeons use to perform measurements. This technique has been validated for certain orthopedic pathologies (Shaw 2012; Quek 2014; Milanese 2014; Milani 2014), but never to assess sagittal parameters in adult spinal deformity (ASD). This study was designed to assess the validity, reproducibility, precision, and efficiency of using a smartphone protractor application to measure sagittal parameters commonly measured in ASD assessment and surgical planning. This study aimed to (1) determine the validity of smartphone protractor applications, (2) determine the intra- and interobserver reliability of smartphone protractor applications when used to measure sagittal parameters in ASD, (3) determine the efficiency of using a smartphone protractor application to measure sagittal parameters, and (4) elucidate whether a physician's level of experience impacts the reliability or validity of using a smartphone protractor application to measure sagittal parameters in ASD. An experimental validation study was carried out. Thirty standard 36″ standing lateral radiographs were examined. Three separate measurements were performed using a marker and protractor; then at a separate time point, three separate measurements were performed using a smartphone protractor application for all 30 radiographs. The first 10 radiographs were then re-measured two more times, for a total of three measurements from both the smartphone protractor and marker and protractor. The parameters included lumbar lordosis, pelvic incidence, and pelvic tilt. Three raters performed all measurements-a junior level orthopedic resident, a senior level orthopedic resident, and a fellowship-trained spinal deformity surgeon. All data, including the time to perform the measurements, were recorded, and statistical analysis was performed to

  9. Validation for a new apparatus measuring water vapour enhancement factors up to 6 MPa

    International Nuclear Information System (INIS)

    Sairanen, H; Heinonen, M

    2014-01-01

    High accuracy dew-point measurements require a water vapour enhancement factor to correct the effects of pressure drop in a sampling line. The enhancement factor is also needed when a humidity quantity value is converted to another. In this paper a new apparatus for traceable measurements of the enhancement factor is presented along with the results of validation measurements with air and methane. The apparatus is designed for dew-point temperatures from −50 to +15 °C and the pressure range from atmospheric pressure up to 6 MPa. The performance of the apparatus was investigated by comparing measurement results to the literature data for air and the data calculated from published thermodynamic measurement results for methane. It is shown that the experimental results agree with the reference data within the estimated uncertainties. (paper)

  10. Uncertainty estimates of purity measurements based on current information: toward a "live validation" of purity methods.

    Science.gov (United States)

    Apostol, Izydor; Kelner, Drew; Jiang, Xinzhao Grace; Huang, Gang; Wypych, Jette; Zhang, Xin; Gastwirt, Jessica; Chen, Kenneth; Fodor, Szilan; Hapuarachchi, Suminda; Meriage, Dave; Ye, Frank; Poppe, Leszek; Szpankowski, Wojciech

    2012-12-01

    To predict precision and other performance characteristics of chromatographic purity methods, which represent the most widely used form of analysis in the biopharmaceutical industry. We have conducted a comprehensive survey of purity methods, and show that all performance characteristics fall within narrow measurement ranges. This observation was used to develop a model called Uncertainty Based on Current Information (UBCI), which expresses these performance characteristics as a function of the signal and noise levels, hardware specifications, and software settings. We applied the UCBI model to assess the uncertainty of purity measurements, and compared the results to those from conventional qualification. We demonstrated that the UBCI model is suitable to dynamically assess method performance characteristics, based on information extracted from individual chromatograms. The model provides an opportunity for streamlining qualification and validation studies by implementing a "live validation" of test results utilizing UBCI as a concurrent assessment of measurement uncertainty. Therefore, UBCI can potentially mitigate the challenges associated with laborious conventional method validation and facilitates the introduction of more advanced analytical technologies during the method lifecycle.

  11. The reliability and validity of fatigue measures during short-duration maximal-intensity intermittent cycling.

    Science.gov (United States)

    Glaister, Mark; Stone, Michael H; Stewart, Andrew M; Hughes, Michael; Moir, Gavin L

    2004-08-01

    The purpose of the present study was to assess the reliability and validity of fatigue measures, as derived from 4 separate formulae, during tests of repeat sprint ability. On separate days over a 3-week period, 2 groups of 7 recreationally active men completed 6 trials of 1 of 2 maximal (20 x 5 seconds) intermittent cycling tests with contrasting recovery periods (10 or 30 seconds). All trials were conducted on a friction-braked cycle ergometer, and fatigue scores were derived from measures of mean power output for each sprint. Apart from formula 1, which calculated fatigue from the percentage difference in mean power output between the first and last sprint, all remaining formulae produced fatigue scores that showed a reasonably good level of test-retest reliability in both intermittent test protocols (intraclass correlation range: 0.78-0.86; 95% likely range of true values: 0.54-0.97). Although between-protocol differences in the magnitude of the fatigue scores suggested good construct validity, within-protocol differences highlighted limitations with each formula. Overall, the results support the use of the percentage decrement score as the most valid and reliable measure of fatigue during brief maximal intermittent work.

  12. Validity of the Symbol Digit Modalities Test as a cognition performance outcome measure for multiple sclerosis.

    Science.gov (United States)

    Benedict, Ralph Hb; DeLuca, John; Phillips, Glenn; LaRocca, Nicholas; Hudson, Lynn D; Rudick, Richard

    2017-04-01

    Cognitive and motor performance measures are commonly employed in multiple sclerosis (MS) research, particularly when the purpose is to determine the efficacy of treatment. The increasing focus of new therapies on slowing progression or reversing neurological disability makes the utilization of sensitive, reproducible, and valid measures essential. Processing speed is a basic elemental cognitive function that likely influences downstream processes such as memory. The Multiple Sclerosis Outcome Assessments Consortium (MSOAC) includes representatives from advocacy organizations, Food and Drug Administration (FDA), European Medicines Agency (EMA), National Institute of Neurological Disorders and Stroke (NINDS), academic institutions, and industry partners along with persons living with MS. Among the MSOAC goals is acceptance and qualification by regulators of performance outcomes that are highly reliable and valid, practical, cost-effective, and meaningful to persons with MS. A critical step for these neuroperformance metrics is elucidation of clinically relevant benchmarks, well-defined degrees of disability, and gradients of change that are deemed clinically meaningful. This topical review provides an overview of research on one particular cognitive measure, the Symbol Digit Modalities Test (SDMT), recognized as being particularly sensitive to slowed processing of information that is commonly seen in MS. The research in MS clearly supports the reliability and validity of this test and recently has supported a responder definition of SDMT change approximating 4 points or 10% in magnitude.

  13. Adapting social neuroscience measures for schizophrenia clinical trials, part 3: fathoming external validity.

    Science.gov (United States)

    Olbert, Charles M; Penn, David L; Kern, Robert S; Lee, Junghee; Horan, William P; Reise, Steven P; Ochsner, Kevin N; Marder, Stephen R; Green, Michael F

    2013-11-01

    It is unknown whether measures adapted from social neuroscience linked to specific neural systems will demonstrate relationships to external variables. Four paradigms adapted from social neuroscience were administered to 173 clinically stable outpatients with schizophrenia to determine their relationships to functionally meaningful variables and to investigate their incremental validity beyond standard measures of social and nonsocial cognition. The 4 paradigms included 2 that assess perception of nonverbal social and action cues (basic biological motion and emotion in biological motion) and 2 that involve higher level inferences about self and others' mental states (self-referential memory and empathic accuracy). Overall, social neuroscience paradigms showed significant relationships to functional capacity but weak relationships to community functioning; the paradigms also showed weak correlations to clinical symptoms. Evidence for incremental validity beyond standard measures of social and nonsocial cognition was mixed with additional predictive power shown for functional capacity but not community functioning. Of the newly adapted paradigms, the empathic accuracy task had the broadest external validity. These results underscore the difficulty of translating developments from neuroscience into clinically useful tasks with functional significance.

  14. Validation of a new strength measurement device for amyotrophic lateral sclerosis clinical trials.

    Science.gov (United States)

    Andres, Patricia L; Skerry, Linda M; Munsat, Theodore L; Thornell, Brenda J; Szymonifka, Jackie; Schoenfeld, David A; Cudkowicz, Merit E

    2012-01-01

    Strength measures with reduced variability and higher sensitivity could improve efficiency in clinical trials of amyotrophic lateral sclerosis (ALS). The Accurate Test of Limb Isometric Strength (ATLIS) was developed to precisely and conveniently measure force in 12 muscle groups. In this study we evaluate the reliability and validity of the ATLIS testing protocol. Twenty healthy adults and 10 patients with ALS were tested twice by the same or by different evaluators to determine test-retest and interrater reliability. Twenty healthy adults were examined using ATLIS and a well-validated strength testing protocol (TQNE) to assess criterion-based validity. Mean absolute variation between tests was 8.6%, and intraclass correlation coefficients for each muscle group were high (range 0.82-0.99). The Pearson correlation coefficient of mean ATLIS and TQNE scores was 0.90. A subject survey demonstrated high user acceptance of ATLIS. ATLIS is convenient for patients and evaluators, produces precise strength measurements, and is easily moved between examining rooms. Copyright © 2011 Wiley Periodicals, Inc.

  15. Measurement Development and Validation of the Family Supportive Supervisor Behavior Short-Form (FSSB-SF)

    Science.gov (United States)

    Hammer, Leslie B.; Kossek, Ellen Ernst; Bodner, Todd; Crain, Tori

    2013-01-01

    Recently, scholars have demonstrated the importance of Family Supportive Supervisor Behaviors (FSSB), defined as behaviors exhibited by supervisors that are supportive of employees’ family roles, in relation to health, well-being, and organizational outcomes. FSSB was originally conceptualized as a multidimensional, superordinate construct with four subordinate dimensions assessed with 14 items: emotional support, instrumental support, role modeling behaviors, and creative work-family management. Retaining one item from each dimension, two studies were conducted to support the development and use of a new FSSB-Short Form (FSSB-SF). Study 1 draws on the original data from the FSSB validation study of retail employees to determine if the results using the 14-item measure replicate with the shorter 4-item measure. Using data from a sample of 823 information technology professionals and their 219 supervisors, Study 2 extends the validation of the FSSB-SF to a new sample of professional workers and new outcome variables. Results from multilevel confirmatory factor analyses and multilevel regression analyses provide evidence of construct and criterion-related validity of the FSSB-SF, as it was significantly related to work-family conflict, job satisfaction, turnover intentions, control over work hours, obligation to work when sick, perceived stress, and reports of family time adequacy. We argue that it is important to develop parsimonious measures of work-family specific support to ensure supervisor support for work and family is mainstreamed into organizational research and practice. PMID:23730803

  16. Characterization of a CLYC detector and validation of the Monte Carlo Simulation by measurement experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun Suk; Ye, Sung Joon [Seoul National University, Seoul (Korea, Republic of); Smith, Martin B.; Koslowsky, Martin R. [Bubble Technology Industries Inc., Chalk River (Canada); Kwak, Sung Woo [Korea Institute of Nuclear Nonproliferation And Control (KINAC), Daejeon (Korea, Republic of); Kim Gee Hyun [Sejong University, Seoul (Korea, Republic of)

    2017-03-15

    Simultaneous detection of neutrons and gamma rays have become much more practicable, by taking advantage of good gamma-ray discrimination properties using pulse shape discrimination (PSD) technique. Recently, we introduced a commercial CLYC system in Korea, and performed an initial characterization and simulation studies for the CLYC detector system to provide references for the future implementation of the dual-mode scintillator system in various studies and applications. We evaluated a CLYC detector with 95% 6Li enrichment using various gamma-ray sources and a 252Cf neutron source, with validation of our Monte Carlo simulation results via measurement experiments. Absolute full-energy peak efficiency values were calculated for gamma-ray sources and neutron source using MCNP6 and compared with measurement experiments of the calibration sources. In addition, behavioral characteristics of neutrons were validated by comparing simulations and experiments on neutron moderation with various polyethylene (PE) moderator thicknesses. Both results showed good agreements in overall characteristics of the gamma and neutron detection efficiencies, with consistent ⁓20% discrepancy. Furthermore, moderation of neutrons emitted from {sup 252}Cf showed similarities between the simulation and the experiment, in terms of their relative ratios depending on the thickness of the PE moderator. A CLYC detector system was characterized for its energy resolution and detection efficiency, and Monte Carlo simulations on the detector system was validated experimentally. Validation of the simulation results in overall trend of the CLYC detector behavior will provide the fundamental basis and validity of follow-up Monte Carlo simulation studies for the development of our dual-particle imager using a rotational modulation collimator.

  17. Validation of behaviour measurement instrument of patients with diabetes mellitus and hypertension

    Science.gov (United States)

    Saputri, G. Z.; Akrom; Dini, S. M.

    2017-11-01

    Non-adherence to the treatment of chronic diseases such as hypertension and Diabetes Mellitus (DM) is a major obstacle in achieving patient therapy targets and quality of life of patients. A comprehensive approach involving pharmacists counselling has shown influences on changes in health behaviour and patient compliance. Behaviour changes in patients are one of the parameters to assess the effectiveness of counselling and education by pharmacists. Therefore, it is necessary to develop questionnaires of behaviour change measurement in DM-hypertension patients. This study aims to develop a measurement instrument in the form of questionnaires in assessing the behaviour change of DM-hypertension patients. Preparation of question items from the questionnaire research instrument refers to some guidelines and previous research references. Test of questionnaire instrument valid was done with expert validation, followed by pilot testing on 10 healthy respondents, and 10 DM-hypertension patients included in the inclusion criteria. Furthermore, field validation test was conducted on 37 patients who had undergone outpatient care at the PKU Muhammadiyah Yogyakarta City Hospital and The Gading Clinic in Yogyakarta. The inclusion criteria were male and female patients, aged 18-65, diagnosed with type 2 diabetes with hypertension who received oral antidiabetic drugs and antihypertensives, and who were not illiterate and co-operative. The data were collected by questionnaire interviews by a standardized pharmacist. The result of validation test using Person correlation shows the value of 0.33. The results of the questionnaire validation test on 37 patients showed 5 items of invalid questions with the value of r 0.33. The reliability value is shown from the Cronbach's alpha value of 0.722 (> 0.6), implying that the questionnaire is reliable for DM-hypertension patients. This Behavioural change questionnaire can be used on DM-hypertension patients, and an FGD approach is required

  18. Questionnaire development and validity to measure sexual intention among youth in Malaysia

    Directory of Open Access Journals (Sweden)

    Noor Azimah Muhammad

    2017-02-01

    Full Text Available Abstract Background From the Theory of Planned Behaviour perspective, sexual intention is determined by a permissive attitude, perception of social norms and perceived self-efficacy in performing sexual activity. The aim of this study was to develop and validate the Youth Sexual Intention Questionnaire (YSI-Q, which was designed to measure sexual intention among youths in Malaysia. Methods A total of 25 items were developed based on literature reviews encompassing four main constructs: sexual intention, attitude, social norms and self-efficacy. The YSI-Q then underwent a validation process that included content and face validity, exploratory factor analysis (EFA, reliability analysis, and confirmatory factor analysis (CFA. This study was conducted on unmarried youths aged 18 to 22 years who were studying in colleges around Klang Valley, Malaysia. Results EFA supported the four factor structure, but five items were removed due to incorrect placement or low factor loading (<0.60. Internal reliability using Cronbach’s alpha ranged between 0.89 and 0.94. The CFA further confirmed the construct, convergent and discriminant validity of the YSI-Q with χ 2 = 392.43, df = 164, p < 0.001, χ 2/df = 2.40, CFI = 0.93 and TLI = 0.92 and RMSEA = 0.08. Conclusion The final set of YSI-Q consisted of 20 items measuring sexual intention (five items, attitude (five items, social norms (six items and self-efficacy (four items of practicing sexual activity. YSI-Q was shown to be a reliable and valid tool to be used among Malaysian youths.

  19. Validation of an optical system to measure acetabular shell deformation in cadavers.

    Science.gov (United States)

    Dold, Philipp; Bone, Martin C; Flohr, Markus; Preuss, Roman; Joyce, Tom J; Deehan, David; Holland, James

    2014-08-01

    Deformation of the acetabular shell at the time of surgery can result in poor performance and early failure of the hip replacement. The study aim was to validate an ATOS III Triple Scan optical measurement system against a co-ordinate measuring machine using in vitro testing and to check repeatability under cadaver laboratory conditions. Two sizes of custom-made acetabular shells were deformed using a uniaxial/two-point loading frame and measured at different loads. Roundness measurements were performed using both the ATOS III Triple Scan optical system and a co-ordinate measuring machine and then compared. The repeatability was also tested by measuring shells pre- and post-insertion in a cadaver laboratory multiple times. The in vitro comparison with the co-ordinate measuring machine demonstrated a maximum difference of 5 µm at the rim and 9 µm at the measurement closest to the pole of the shell. Maximum repeatability was below 1 µm for the co-ordinate measuring machine and 3 µm for the ATOS III Triple Scan optical system. Repeatability was comparable between the pre-insertion (below 2 µm) and post-insertion (below 3 µm) measurements in the cadaver laboratory. This study supports the view that the ATOS III Triple Scan optical system fulfils the necessary requirements to accurately measure shell deformation in cadavers. © IMechE 2014.

  20. Reliability and Validity of Computerized Force Platform Measures of Balance Function in Healthy Older Adults.

    Science.gov (United States)

    Harro, Cathy C; Garascia, Chelsea

    2018-01-10

    Postural control declines with aging and is an independent risk factor for falls in older adults. Objective examination of balance function is warranted to direct fall prevention strategies. Force platform (FP) systems provide quantitative measures of postural control and analysis of different aspects of balance. The purpose of this study was to examine the reliability and validity of FP measures in healthy older adults. This study enrolled 46 healthy elderly adults, mean age 67.67 (5.1) years, who had no history of falls. They were assessed on 3 standardized tests on the NeuroCom Equitest FP system: limits of stability (LOS), motor control test (MCT), and sensory organization test (SOT). The test battery was administered twice within a 10-day period for test-retest reliability; intraclass correlation coefficients (ICCs), standard error of measurement (SEM), and minimal detectable change based on a 95% confidence interval (MDC95) were calculated. FP measures were compared with criterion clinical balance (Mini-BESTest and Functional Gait Assessment) and gait (10-m walk and 6-minute walk) measures to examine concurrent validity using Pearson correlation coefficients. Multiple linear regression analysis examined whether age and activity level were associated with FP performance. The α level was set at P point excursion measures all demonstrated excellent test-retest reliability (ICC = 0.90, 0.85, and 0.77, respectively), whereas moderate to good reliability was found for SOT vestibular ratio score (ICC = 0.71). There was large variability in performance in this healthy elderly cohort, resulting in relatively large MDC95 for these measures, especially for the LOS test. Fair correlations were found between LOS end point excursion and clinical balance and gait measures (r = 0.31-0.49), and between MCT average latency and gait measures only (r = -0.32). No correlations were found between SOT measures and clinical balance and gait measures. Age was only marginally

  1. Development and validation of MyLifeTracker: a routine outcome measure for youth mental health

    Directory of Open Access Journals (Sweden)

    Kwan B

    2018-04-01

    Full Text Available Benjamin Kwan,1 Debra J Rickwood,1,2 Nic R Telford2 1Faculty of Health, University of Canberra, Bruce, ACT, 2headspace National Youth Mental Health Foundation, Melbourne, VIC, Australia Purpose: Routine outcome measures are now being designed for session-by-session use, with emphasis on clinically meaningful items and sensitivity to change. Despite an increasing mental health service focus for young people aged 12–25 years, there is a lack of outcome measures that are designed to be used across this age group. Consequently, MyLifeTracker (MLT was developed as a brief mental health outcome measure designed for young people for routine use. It consists of the following five items targeting areas of importance to young people: general well-being, day-to-day activities, relationships with friends, relationships with family, and general coping. Participants and methods: The measure was tested with 75,893 young people aged 12–25 years attending headspace centers across Australia for mental health-related issues. Results: MLT showed a robust unidimensional factor structure and appropriate reliability. It exhibited good concurrent validity against well-validated measures of psychological distress, well-being, functioning, and life satisfaction. The measure was further demonstrated to be sensitive to change. Conclusion: MLT provides a psychometrically sound mental health outcome measure for young people. The measure taps into items that are meaningful to young people and provides an additional clinical support tool for clinicians and clients during therapy. The measure is brief and easy to use and has been incorporated into an electronic system that routinely tracks session-by-session change and produces time-series charts for the ease of use and interpretation. Keywords: MyLifeTracker, youth mental health, routine outcome measure, routine outcome monitoring, adolescent and young adult

  2. Validation of the PROMIS® measures of self-efficacy for managing chronic conditions.

    Science.gov (United States)

    Gruber-Baldini, Ann L; Velozo, Craig; Romero, Sergio; Shulman, Lisa M

    2017-07-01

    The Patient-Reported Outcomes Measurement Information System ® (PROMIS ® ) was designed to develop, validate, and standardize item banks to measure key domains of physical, mental, and social health in chronic conditions. This paper reports the calibration and validation testing of the PROMIS Self-Efficacy for Managing Chronic Conditions measures. PROMIS Self-Efficacy for Managing Chronic Conditions item banks comprise five domains, Self-Efficacy for Managing: Daily Activities, Symptoms, Medications and Treatments, Emotions, and Social Interactions. Banks were calibrated in 1087 subjects from two data sources: 837 patients with chronic neurologic conditions (epilepsy, multiple sclerosis, neuropathy, Parkinson disease, and stroke) and 250 subjects from an online Internet sample of adults with general chronic conditions. Scores were compared with one legacy scale: Self-Efficacy for Managing Chronic Disease 6-Item scale (SEMCD6) and five PROMIS short forms: Global Health (Physical and Mental), Physical Function, Fatigue, Depression, and Anxiety. The sample was 57% female, mean age = 53.8 (SD = 14.7), 76% white, 21% African American, 6% Hispanic, and 76% with greater than high school education. Full-item banks were created for each domain. All measures had good internal consistency and correlated well with SEMCD6 (r  = 0.56-0.75). Significant correlations were seen between the Self-Efficacy measures and other PROMIS short forms (r  > 0.38). The newly developed PROMIS Self-Efficacy for Managing Chronic Conditions measures include five domains of self-efficacy that were calibrated across diverse chronic conditions and show good internal consistency and cross-sectional validity.

  3. Validation of an ambulatory capacity measure in Parkinson disease: a construct derived from the Unified Parkinson's Disease Rating Scale.

    Science.gov (United States)

    Parashos, Sotirios A; Elm, Jordan; Boyd, James T; Chou, Kelvin L; Dai, Lin; Mari, Zoltan; Morgan, John C; Sudarsky, Lewis; Wielinski, Catherine L

    2015-01-01

    A construct calculated as the sum of items 13-15, 29, 30 of the Unified Parkinson's Disease Rating Scale (UPDRS) has been used as an "Ambulatory Capacity Measure" (ACM) in Parkinson disease (PD). Its construct validity has never been examined. A similar construct, consisting of the mean value of the same UPDRS items has been used under the acronym PIGD as a measure of postural instability and gait disorder in PD. To examine the construct validity of the ACM and PIGD in PD. We analyzed data in an existing database of 340 PD patients, Hoehn and Yahr stages (HYS) 1-5 who participated in a study of falls. Number of falls (NOF) was recorded over 4 weeks, and UPDRS (mental, ADL, and motor subscales), HYS, Activities Based Confidence Scale (ABC), Freezing of Gait Questionnaire (FOG), Five Times Sit-to-Stand (FTSS), Timed Up-and Go (TUG), Gait Velocity (GV), and Berg Balance Scale (BBS) evaluations were performed. Internal consistency was assessed by Cronbach's alpha. Construct validity was assessed through correlations of the ACM and PIGD to these measures and to their summed-ranks. A coefficient of determination was calculated through linear regression. Mean age was 71.4, mean age at diagnosis 61.4 years; 46% were women; mean UPDRS subscale scores were: Mental 3.7; ADL 15.7; motor: 27.1; mean ACM was 6.51, and mean PIGD 1.30. Cronbach's alpha was 0.78 for both ACM and PIGD. Spearman correlation coefficients between the ACM/PIGD and ABC, FOG, TUG, GV and BBS were 0.69, 0.72, 0.67, 0.58, and 0.70 respectively. Correlation between the ACM/PIGD and summed-ranks of HYS, NOF, ABC, FOG, FTSS, TUG, GV and BBS was high (Spearman r = 0.823, p < 0.0001); 68% of the variability in the summed-ranks was explained by ACM/PIGD. The ACM and the PIGD are valid global measures and accurately reflect the combined effects of the various components of ambulatory capacity in PD patients with HY stages 1-4.

  4. Measuring striving for understanding and learning value of geometry: a validity study

    Science.gov (United States)

    Ubuz, Behiye; Aydınyer, Yurdagül

    2017-11-01

    The current study aimed to construct a questionnaire that measures students' personality traits related to striving for understanding and learning value of geometry and then examine its psychometric properties. Through the use of multiple methods on two independent samples of 402 and 521 middle school students, two studies were performed to address this issue to provide support for its validity. In Study 1, exploratory factor analysis indicated the two-factor model. In Study 2, confirmatory factor analysis indicated the better fit of two-factor model compared to one or three-factor model. Convergent and discriminant validity evidence provided insight into the distinctiveness of the two factors. Subgroup validity evidence revealed gender differences for striving for understanding geometry trait favouring girls and grade level differences for learning value of geometry trait favouring the sixth- and seventh-grade students. Predictive validity evidence demonstrated that the striving for understanding geometry trait but not learning value of geometry trait was significantly correlated with prior mathematics achievement. In both studies, each factor and the entire questionnaire showed satisfactory reliability. In conclusion, the questionnaire was psychometrically sound.

  5. Site characterization and validation - monitoring of saline tracer transport by borehole radar measurements

    International Nuclear Information System (INIS)

    Olsson, O.; Andersson, P.; Gustafsson, E.

    1991-08-01

    The objective of this experiment was to map tracer transport in fractured crystalline rock through a combination of radar difference tomography and measurements of tracer concentration in boreholes and the validation drift. The experiment was performed twice, first the D-boreholes were used as a sink and then they were replaced by the validation drift and the experiment repeated. In both experiments saline tracer (200 ml/min, 2% salinity) was injected into fracture zone H about 25 m from the validation drift. The experiment revealed an inhomogeneous transmissivity distribution in Zone H. A significant portion of the tracer is transported upwards along Zone H and towards boreholes T1, T2, and W1. The breakthrough data from both experiments indicate that there are two major transport paths from borehole C2 to the D-boreholes/validation drift. One slow and diluted path to the bottom of the drift which carries the bulk of the mass and one fast path to the crown of the drift with high tracer concentration. The radar difference tomograms show that some tracer is lost through Zone S which intersects Zone H and is nearly perpendicular to it. The intersection between the two zones seems to constitute a preferred flow path. The breakthrough data and the radar difference tomograms have also been used to estimate flow porosity. The estimate obtained area of the same order approximately 10 -4 . (au) (28 refs.)

  6. Questionnaire development and validity to measure sexual intention among youth in Malaysia.

    Science.gov (United States)

    Muhammad, Noor Azimah; Shamsuddin, Khadijah; Mohd Amin, Rahmah; Omar, Khairani; Thurasamy, Ramayah

    2017-02-02

    From the Theory of Planned Behaviour perspective, sexual intention is determined by a permissive attitude, perception of social norms and perceived self-efficacy in performing sexual activity. The aim of this study was to develop and validate the Youth Sexual Intention Questionnaire (YSI-Q), which was designed to measure sexual intention among youths in Malaysia. A total of 25 items were developed based on literature reviews encompassing four main constructs: sexual intention, attitude, social norms and self-efficacy. The YSI-Q then underwent a validation process that included content and face validity, exploratory factor analysis (EFA), reliability analysis, and confirmatory factor analysis (CFA). This study was conducted on unmarried youths aged 18 to 22 years who were studying in colleges around Klang Valley, Malaysia. EFA supported the four factor structure, but five items were removed due to incorrect placement or low factor loading (social norms (six items) and self-efficacy (four items) of practicing sexual activity. YSI-Q was shown to be a reliable and valid tool to be used among Malaysian youths.

  7. Assessing behavioural changes in ALS: cross-validation of ALS-specific measures.

    Science.gov (United States)

    Pinto-Grau, Marta; Costello, Emmet; O'Connor, Sarah; Elamin, Marwa; Burke, Tom; Heverin, Mark; Pender, Niall; Hardiman, Orla

    2017-07-01

    The Beaumont Behavioural Inventory (BBI) is a behavioural proxy report for the assessment of behavioural changes in ALS. This tool has been validated against the FrSBe, a non-ALS-specific behavioural assessment, and further comparison of the BBI against a disease-specific tool was considered. This study cross-validates the BBI against the ALS-FTD-Q. Sixty ALS patients, 8% also meeting criteria for FTD, were recruited. All patients were evaluated using the BBI and the ALS-FTD-Q, completed by a carer. Correlational analysis was performed to assess construct validity. Precision, sensitivity, specificity, and overall accuracy of the BBI when compared to the ALS-FTD-Q, were obtained. The mean score of the whole sample on the BBI was 11.45 ± 13.06. ALS-FTD patients scored significantly higher than non-demented ALS patients (31.6 ± 14.64, 9.62 ± 11.38; p ALS-FTD-Q was observed (r = 0.807, p ALS-FTD-Q. Good construct validity has been further confirmed when the BBI is compared to an ALS-specific tool. Furthermore, the BBI is a more comprehensive behavioural assessment for ALS, as it measures the whole behavioural spectrum in this condition.

  8. Validation of measures from the smartphone sway balance application: a pilot study.

    Science.gov (United States)

    Patterson, Jeremy A; Amick, Ryan Z; Thummar, Tarunkumar; Rogers, Michael E

    2014-04-01

    A number of different balance assessment techniques are currently available and widely used. These include both subjective and objective assessments. The ability to provide quantitative measures of balance and posture is the benefit of objective tools, however these instruments are not generally utilized outside of research laboratory settings due to cost, complexity of operation, size, duration of assessment, and general practicality. The purpose of this pilot study was to assess the value and validity of using software developed to access the iPod and iPhone accelerometers output and translate that to the measurement of human balance. Thirty healthy college-aged individuals (13 male, 17 female; age = 26.1 ± 8.5 years) volunteered. Participants performed a static Athlete's Single Leg Test protocol for 10 sec, on a Biodex Balance System SD while concurrently utilizing a mobile device with balance software. Anterior/posterior stability was recorded using both devices, described as the displacement in degrees from level, and was termed the "balance score." There were no significant differences between the two reported balance scores (p = 0.818. Mean balance score on the balance platform was 1.41 ± 0.90, as compared to 1.38 ± 0.72 using the mobile device. There is a need for a valid, convenient, and cost-effective tool to objectively measure balance. Results of this study are promising, as balance score derived from the Smartphone accelerometers were consistent with balance scores obtained from a previously validated balance system. However, further investigation is necessary as this version of the mobile software only assessed balance in the anterior/posterior direction. Additionally, further testing is necessary on a healthy populations and as well as those with impairment of the motor control system. Level 2b (Observational study of validity)(1.)

  9. Validation of Karolinska Exhaustion Scale: psychometric properties of a measure of exhaustion syndrome.

    Science.gov (United States)

    Saboonchi, Fredrik; Perski, Aleksander; Grossi, Giorgio

    2013-12-01

    The syndrome of exhaustion is currently a medical diagnosis in Sweden. The description of the syndrome largely corresponds to the suggested core component of burnout, that is exhaustion. Karolinska Exhaustion Scale (KES) has been constructed to provide specific assessment of exhaustion in clinical and research settings. The purpose of the present study was to examine the psychometric properties of this scale in its original and revised versions by examining the factorial structure and measures of convergent and discriminant validity. Data gathered from two independent samples (n1 = 358 & n2 = 403) consisting of patients diagnosed with 'reaction to severe stress, and adjustment disorder' were subjected to confirmatory factor analysis. The study's instruments were Karolinska Exhaustion Scale and Shirom Melam Burnout Measure. Correlation analyses were employed to follow up the established factorial structure of the scale. The study was ethically approved by Karolinska Institute regional ethic committee. The findings demonstrated adequate fit of the data to the measurement model provided by the revised version of KES Limitations: The main limitation of the present study is the lack of a gold standard of exhaustion for direct comparison with KES. (KES-26) and partially supported convergent validity and discriminant validity of the scale. The demonstrated psychometric properties of KES-26 indicate sound construct validity for this scale encouraging use of this scale in assessment of exhaustion. The factorial structure of KES-26 may also be used to provide information concerning possible different clinical profiles. © 2012 The Authors Scandinavian Journal of Caring Sciences © 2012 Nordic College of Caring Science.

  10. Reliability and Validity of the Turkish Version of the Voice-Related Quality of Life Measure.

    Science.gov (United States)

    Tezcaner, Zahide Çiler; Aksoy, Songül

    2017-03-01

    This study aims to test the validity and reliability of the Turkish version of the Voice-Related Quality of Life (V-RQOL) questionnaire. This is a nonrandomized, prospective study with control group. The questionnaire was administered to 249 individuals-130 with vocal complaint and 119 without-with a mean age of 37.8 ± 12.3 years. The Turkish version of the Voice Handicap Index (VHI) and perceptual voice evaluation measures were also administered at 2-14 days for retest reliability. The instrument was submitted to validity and reliability evaluation. The V-RQOL measure showed a strong internal consistency and test-retest reliability; the Cronbach's alpha coefficient for the overall V-RQOL was 0.969, the physical functioning domain was 0.949, and the social-emotional domain was 0.940. In the test-retest reliability test, the overall V-RQOL was found to be 0.989. The construct validity of the V-RQOL was determined based on the strength and direction of its relation to the VHI and the perceptual voice evaluation measure. The higher the VHI level, the lower the physical functioning, social-emotional, and overall score levels of the V-RQOL (r = -0.927, r = -0.912, r = -0.944, respectively; P reliability and validity and may play a crucial role in evaluating Turkish-speaking patients with voice disorders. Copyright © 2017 The Voice Foundation. Published by Elsevier Inc. All rights reserved.

  11. Validation of a Residual Stress Measurement Method by Swept High-Frequency Eddy Currents

    International Nuclear Information System (INIS)

    Lee, C.; Shen, Y.; Lo, C. C. H.; Nakagawa, N.

    2007-01-01

    This paper reports on a swept high-frequency eddy current (SHFEC) measurement method developed for electromagnetic nondestructive characterization of residual stresses in shot peened aerospace materials. In this approach, we regard shot-peened surfaces as modified surface layers of varying conductivity, and determine the conductivity deviation profile by inversion of the SHFEC data. The SHFEC measurement system consists of a pair of closely matched printed-circuit-board coils driven by laboratory instrument under software control. This provides improved sensitivity and high frequency performance compared to conventional coils, so that swept frequency EC measurements up to 50 MHz can be made to achieve the smallest skin depth of 80 μm for nickel-based superalloys. We devised a conductivity profile inversion procedure based on the laterally uniform multi-layer theory of Cheng, Dodd and Deeds. The main contribution of this paper is the methodology validation. Namely, the forward and inverse models were validated against measurements on artificial layer specimens consisting of metal films with different conductivities placed on a metallic substrate. The inversion determined the film conductivities which were found to agree with those measured using the direct current potential drop (DCPD) method

  12. Validation of a Residual Stress Measurement Method by Swept High-Frequency Eddy Currents

    Science.gov (United States)

    Lee, C.; Shen, Y.; Lo, C. C. H.; Nakagawa, N.

    2007-03-01

    This paper reports on a swept high-frequency eddy current (SHFEC) measurement method developed for electromagnetic nondestructive characterization of residual stresses in shot peened aerospace materials. In this approach, we regard shot-peened surfaces as modified surface layers of varying conductivity, and determine the conductivity deviation profile by inversion of the SHFEC data. The SHFEC measurement system consists of a pair of closely matched printed-circuit-board coils driven by laboratory instrument under software control. This provides improved sensitivity and high frequency performance compared to conventional coils, so that swept frequency EC measurements up to 50 MHz can be made to achieve the smallest skin depth of 80 μm for nickel-based superalloys. We devised a conductivity profile inversion procedure based on the laterally uniform multi-layer theory of Cheng, Dodd and Deeds. The main contribution of this paper is the methodology validation. Namely, the forward and inverse models were validated against measurements on artificial layer specimens consisting of metal films with different conductivities placed on a metallic substrate. The inversion determined the film conductivities which were found to agree with those measured using the direct current potential drop (DCPD) method.

  13. The reliability and validity of hand-held refractometry water content measures of hydrogel lenses.

    Science.gov (United States)

    Nichols, Jason J; Mitchell, G Lynn; Good, Gregory W

    2003-06-01

    To investigate within- and between-examiner reliability and validity of hand-held refractometry water content measures of hydrogel lenses. Nineteen lenses of various nominal water contents were examined by two examiners on two occasions separated by 1 hour. An Atago N2 hand-held refractometer was used for all water content measures. Lenses were presented in a random order to each examiner by a third party, and examiners were masked to any potential lens identifiers. Intraclass correlation coefficients (ICC), 95% limits of agreement, and Wilcoxon signed rank test were used to characterize the within- and between-examiner reliability and validity of lens water content measures. Within-examiner reliability was excellent (ICC, 0.97; 95% limits of agreement, -3.6% to +5.7%), and the inter-visit mean difference of 1.1 +/- 2.4% was not biased (p = 0.08). Between-examiner reliability was also excellent (ICC, 0.98; 95% limits of agreement, -4.1% to +3.9%). The mean difference between examiners was -0.1 +/- 2.1% (p = 0.83). The mean difference between the nominally reported water content and our water content measures was -2.1 +/- 1.7% (p refractometry and is material dependent. Therefore, investigators may need to account for bias when measuring hydrogel lens water content via hand-held refractometry.

  14. Validation of six years of SCIAMACHY carbon monoxide observations using MOZAIC CO profile measurements

    Directory of Open Access Journals (Sweden)

    A. T. J. de Laat

    2012-09-01

    Full Text Available This paper presents a validation study of SCanning Imaging Absorption SpectroMeter for Atmospheric CartograpHY (SCIAMACHY carbon monoxide (CO total column measurements from the Iterative Maximum Likelihood Method (IMLM algorithm using vertically integrated profile aircraft measurements obtained within the MOZAIC project for the six year time period of 2003–2008.

    Overall we find a good agreement between SCIAMACHY and airborne measurements for both mean values – also on a year-to-year basis – as well as seasonal variations. Several locations show large biases that are attributed to local effects like orography and proximity of large emission sources. Differences were detected for individual years: 2003, 2004 and 2006 have larger biases than 2005, 2007 and 2008, which appear to be related to SCIAMACHY instrumental issues but require more research. Results from this study are consistent with, and complementary to, findings from a previous validation study using ground-based measurements (de Laat et al., 2010b. According to this study, the SCIAMACHY data, if individual measurements are of sufficient quality – good signal-to-noise, can be used to determine the spatial distribution and seasonal cycles of CO total columns over clean areas. Biases found over areas with strong emissions (Africa, China could be explained by low sensitivity of the instrument in the boundary layer and users are recommended to avoid using the SCIAMACHY data while trying to quantify CO burden and/or retrieve CO emissions in such areas.

  15. Validity of linear encoder measurement of sit-to-stand performance power in older people.

    Science.gov (United States)

    Lindemann, U; Farahmand, P; Klenk, J; Blatzonis, K; Becker, C

    2015-09-01

    To investigate construct validity of linear encoder measurement of sit-to-stand performance power in older people by showing associations with relevant functional performance and physiological parameters. Cross-sectional study. Movement laboratory of a geriatric rehabilitation clinic. Eighty-eight community-dwelling, cognitively unimpaired older women (mean age 78 years). Sit-to-stand performance power and leg power were assessed using a linear encoder and the Nottingham Power Rig, respectively. Gait speed was measured on an instrumented walkway. Maximum quadriceps and hand grip strength were assessed using dynamometers. Mid-thigh muscle cross-sectional area of both legs was measured using magnetic resonance imaging. Associations of sit-to-stand performance power with power assessed by the Nottingham Power Rig, maximum gait speed and muscle cross-sectional area were r=0.646, r=0.536 and r=0.514, respectively. A linear regression model explained 50% of the variance in sit-to-stand performance power including muscle cross-sectional area (p=0.001), maximum gait speed (p=0.002), and power assessed by the Nottingham Power Rig (p=0.006). Construct validity of linear encoder measurement of sit-to-stand power was shown at functional level and morphological level for older women. This measure could be used in routine clinical practice as well as in large-scale studies. DRKS00003622. Copyright © 2015 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

  16. Validation of the Focus on the Outcomes of Communication under Six outcome measure

    Science.gov (United States)

    Thomas-Stonell, Nancy; Oddson, Bruce; Robertson, Bernadette; Rosenbaum, Peter

    2013-01-01

    Aim The aim of this study was to establish the construct validity of the Focus on the Outcomes of Communication Under Six (FOCUS©),a tool designed to measure changes in communication skills in preschool children. Method Participating families' children (n=97; 68 males, 29 females; mean age 2y 8mo; SD 1.04y, range 10mo–4y 11mo) were recruited through eight Canadian organizations. The children were on a waiting list for speech and language intervention. Parents completed the Ages and Stages Questionnaire – Social/Emotional (ASQ-SE) and the FOCUS three times: at assessment and at the start and end of treatment. A second sample (n=28; 16 males 12 females) was recruited from another organization to correlate the FOCUS scores with speech, intelligibility and language measures. Second sample participants ranged in age from 3 years 1 month to 4 years 9 months (mean 3y 11mo; SD 0.41y). At the start and end of treatment, children were videotaped to obtain speech and language samples. Parents and speech–language pathologists (SLPs) independently completed the FOCUS tool. SLPs who were blind to the pre/post order of the videotapes analysed the samples. Results The FOCUS measured significantly more change (p<0.01) during treatment than during the waiting list period. It demonstrated both convergent and discriminant validity against the ASQ-SE. The FOCUS change corresponded to change measured by a combination of clinical speech and language measures (κ=0.31, p<0.05). Conclusion The FOCUS shows strong construct validity as a change-detecting instrument. PMID:23461266

  17. Validation of the CMT Pediatric Scale as an outcome measure of disability

    Science.gov (United States)

    Burns, Joshua; Ouvrier, Robert; Estilow, Tim; Shy, Rosemary; Laurá, Matilde; Pallant, Julie F.; Lek, Monkol; Muntoni, Francesco; Reilly, Mary M.; Pareyson, Davide; Acsadi, Gyula; Shy, Michael E.; Finkel, Richard S.

    2012-01-01

    Objective Charcot-Marie-Tooth disease (CMT) is a common heritable peripheral neuropathy. There is no treatment for any form of CMT although clinical trials are increasingly occurring. Patients usually develop symptoms during the first two decades of life but there are no established outcome measures of disease severity o