Planeeringute uus veebiregister sai valmis

Index Scriptorium Estoniae

2015-01-01

Varasem register http://ehitus.tallinn.ee jääb projekteerimistingimuste ja ehitusprojektide jaoks, Tallinna uus planeeringute register http://tpr.tallinn.ee võimaldab kõigil huvitatutel linnaplaneerimises arvamust avaldada

Eesti lipul on uus seadus / Urmas Reinsalu

Index Scriptorium Estoniae

Reinsalu, Urmas, 1975-

2005-01-01

Sama ka Nädaline 2. aprill 2005, lk. 4 ; Vooremaa 2. aprill 2004, lk. 2 ; Valgamaalane 5. aprill 2005, lk. 2 ; Hiiu Leht 5. aprill 2005, lk. 2 ; vali Uudised 6. aprill 2005, lk. 2 ; Põhjarannik 31. märts 2005, lk. 2 ; Sakala 7. april 2005, lk. 2 ; Kuulutaja 1. aprill 2004, lk. 4 artiklis pealkiri kujul: Eesti sini-must-valgel trikolooril alates möödunud nädalast uus seadus ; Pärnu Postimees 12. aprill 2005, lk. 15 artiklis pealkiri kujul: Eesti lipul järgmisest aastast uus seadus

BONDI-97 A novel neutron energy spectrum unfolding tool using a genetic algorithm

CERN Document Server

Mukherjee, B

1999-01-01

The neutron spectrum unfolding procedure using the count rate data obtained from a set of Bonner sphere neutron detectors requires the solution of the Fredholm integral equation of the first kind by using complex mathematical methods. This paper reports a new approach for the unfolding of neutron spectra using the Genetic Algorithm tool BONDI-97 (BOnner sphere Neutron DIfferentiation). The BONDI-97 was used as the input for Genetic Algorithm engine EVOLVER to search for a globally optimised solution vector from a population of randomly generated solutions. This solution vector corresponds to the unfolded neutron energy spectrum. The Genetic Algorithm engine emulates the Darwinian 'Survival of the Fittest' strategy, the key ingredient of the 'Theory of Evolution'. The spectra of sup 2 sup 4 sup 1 Am/Be (alpha,n) and sup 2 sup 3 sup 9 Pu/Be (alpha,n) neutron sources were unfolded using the BONDI-97 tool. (author)

RADIATIVELY EFFICIENT MAGNETIZED BONDI ACCRETION

International Nuclear Information System (INIS)

Cunningham, Andrew J.; Klein, Richard I.; McKee, Christopher F.; Krumholz, Mark R.; Teyssier, Romain

2012-01-01

We have carried out a numerical study of the effect of large-scale magnetic fields on the rate of accretion from a uniform, isothermal gas onto a resistive, stationary point mass. Only mass, not magnetic flux, accretes onto the point mass. The simulations for this study avoid complications arising from boundary conditions by keeping the boundaries far from the accreting object. Our simulations leverage adaptive refinement methodology to attain high spatial fidelity close to the accreting object. Our results are particularly relevant to the problem of star formation from a magnetized molecular cloud in which thermal energy is radiated away on timescales much shorter than the dynamical timescale. Contrary to the adiabatic case, our simulations show convergence toward a finite accretion rate in the limit in which the radius of the accreting object vanishes, regardless of magnetic field strength. For very weak magnetic fields, the accretion rate first approaches the Bondi value and then drops by a factor of ∼2 as magnetic flux builds up near the point mass. For strong magnetic fields, the steady-state accretion rate is reduced by a factor of ∼0.2 β 1/2 compared to the Bondi value, where β is the ratio of the gas pressure to the magnetic pressure. We give a simple expression for the accretion rate as a function of the magnetic field strength. Approximate analytic results are given in the Appendices for both time-dependent accretion in the limit of weak magnetic fields and steady-state accretion for the case of strong magnetic fields.

RADIATIVELY EFFICIENT MAGNETIZED BONDI ACCRETION

Energy Technology Data Exchange (ETDEWEB)

Cunningham, Andrew J.; Klein, Richard I. [Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States); McKee, Christopher F. [Department of Astronomy, University of California Berkeley, Berkeley, CA 94720 (United States); Krumholz, Mark R. [Department of Astronomy and Astrophysics, University of California Santa Cruz, Santa Cruz, CA 94560 (United States); Teyssier, Romain, E-mail: ajcunn@gmail.com [Service d' Astrophysique, CEA Saclay, 91191 Gif-sur-Yvette (France)

2012-01-10

We have carried out a numerical study of the effect of large-scale magnetic fields on the rate of accretion from a uniform, isothermal gas onto a resistive, stationary point mass. Only mass, not magnetic flux, accretes onto the point mass. The simulations for this study avoid complications arising from boundary conditions by keeping the boundaries far from the accreting object. Our simulations leverage adaptive refinement methodology to attain high spatial fidelity close to the accreting object. Our results are particularly relevant to the problem of star formation from a magnetized molecular cloud in which thermal energy is radiated away on timescales much shorter than the dynamical timescale. Contrary to the adiabatic case, our simulations show convergence toward a finite accretion rate in the limit in which the radius of the accreting object vanishes, regardless of magnetic field strength. For very weak magnetic fields, the accretion rate first approaches the Bondi value and then drops by a factor of {approx}2 as magnetic flux builds up near the point mass. For strong magnetic fields, the steady-state accretion rate is reduced by a factor of {approx}0.2 {beta}{sup 1/2} compared to the Bondi value, where {beta} is the ratio of the gas pressure to the magnetic pressure. We give a simple expression for the accretion rate as a function of the magnetic field strength. Approximate analytic results are given in the Appendices for both time-dependent accretion in the limit of weak magnetic fields and steady-state accretion for the case of strong magnetic fields.

Aasta Suurim Film? / Chili Palmer

Index Scriptorium Estoniae

Palmer, Chili

2002-01-01

Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse vennaskond", ("The Lord of the Rings : The Fellowship of the Ring") : Uus-Meremaa, Ameerika Ühendriigid 2001

Uus muuseum Argentinas / Maria-Kristiina Soomre

Index Scriptorium Estoniae

Soomre, Maria-Kristiina, 1978-

2002-01-01

Buenos Airese Palermo linnaosas avati kolme noore argentiina arhitekti projekteeritud uus ladina-ameerika kunsti muuseum. Muuseumi XX sajandi ladina-ameerika kunsti kogust, kuraator Augustin Arteaga kollektsiooni ülesandest.

Spiraal : uus Victoria & Alberti muuseum Londonis

Index Scriptorium Estoniae

1998-01-01

Daniel Libeskindi projekt Victoria & Alberti Muuseumi laiendamiseks on põhjustanud konservatiivsete londonlaste pahameele, kuid kutsunud esile ka hulgaliselt toetusavaldusi. Muuseumi uus osa (kokkuvarisemise piiril näiva ehitisena) peaks külastajaile avatama 2004. a.

Milles avaldub uus haldusjuhtimine? / Jaanus Kiili

Index Scriptorium Estoniae

Kiili, Jaanus, 1958-

2003-01-01

Uus juhtimise (haldamise) paradigma vaatleb kaost ja komplekssust mitte lahendamist vajava probleemina, vaid selle protsessi sisulise aspektina, millega elussüsteemid kohastuvad, uuenevad, säilitavad ja ületavad neid läbi iseorganiseerumise, väidab autor

Uus-Kaledoonia kultuurikeskus / Triin Ojari

Index Scriptorium Estoniae

Ojari, Triin, 1974-

1998-01-01

Itaalia arhitekti Renzo Piano projekteeritud kultuurikeskus Nouméas Uus-Kaledoonia pealinnas. Omapärase fassaadi ئ 27 m kõrgused hiiglaslikud puidust kilbid kuuma õhu.ja päikesevalguse reguleerijatena ئ taha peituvad madalad, mitmesuguseid ühisruume sisaldavad 'onnid', kümmet koorik-onni ühendab pikk sisetänav.

Saku uus logo liidab traditsioonid ja uuendusmeelsuse

Index Scriptorium Estoniae

2007-01-01

Reklaamiagentuur Divisioni loometööd juhtinud Dan Mikkin Saku Õlletehase uue logo loomisprotsessist ja stiiliraamatu kokkupanemisest. Karin Sepa kommentaar "Uus logo on avatum". Illustratsiooniks Saku õlletehase logod läbi aegade

Uus õpikeskkond : globaalne vaatenurk / Sirje Virkus

Index Scriptorium Estoniae

Virkus, Sirje, 1956-

1997-01-01

2.-6. juunini 1997. a. Ameerika Ühendriikides Pennsylvania Riiklikus Ülikoolis toimunud rahvusvahelisest konverentsist teemal "Uus õpikeskkond : globaalne vaatenurk". Eestit esindas konverentsil Tallinna Pedagoogikaülikooli Infoteaduste osakonna infoteaduse õppetooli õppejõud Sirje Virkus ettekandega "Eesti kaugkoolitus võrgukeskonnas". Konverentsi ettekanded valgustasid kaugkoolituse probleeme kogu maailmas

Veneetsias esilinastus uus Madonna film

Index Scriptorium Estoniae

2011-01-01

Väljaspool võistlust linastub Veneetsia filmifestivalil Madonna film "W.E.". Ka Katusekinos esietenduvast tantsulavastusest "Lost at Midnight"; "Legend vägevast seebist" maailmaesilinastusest Austinis, Texases toimuval filmifestivalil Fantastic Fest; Katusekinos 9. sept. toimuvast üritusest PechaKucha

Uus kodulehekülg avatud! / Tiina Veldi

Index Scriptorium Estoniae

Veldi, Tiina

2001-01-01

20. märtsil 2001. a. avati Tallinna Pedagoogikaülikooli uus kodulehekülg. Avamisele eelnes aastapikkune koostöö TPÜ ja All Web Industry vahel, kes on uue kodulehekülje kujunduse ja tehnilise teostuse autor

Isothermal Bondi Accretion in Jaffe and Hernquist Galaxies with a Central Black Hole: Fully Analytical Solutions

Energy Technology Data Exchange (ETDEWEB)

Ciotti, Luca; Pellegrini, Silvia, E-mail: luca.ciotti@unibo.it [Department of Physics and Astronomy, University of Bologna, via Piero Gobetti 93/2, I-40129 Bologna (Italy)

2017-10-10

One of the most active fields of research of modern-day astrophysics is that of massive black hole formation and coevolution with the host galaxy. In these investigations, ranging from cosmological simulations, to semi-analytical modeling, to observational studies, the Bondi solution for accretion on a central point-mass is widely adopted. In this work we generalize the classical Bondi accretion theory to take into account the effects of the gravitational potential of the host galaxy, and of radiation pressure in the optically thin limit. Then, we present the fully analytical solution, in terms of the Lambert–Euler W -function, for isothermal accretion in Jaffe and Hernquist galaxies with a central black hole. The flow structure is found to be sensitive to the shape of the mass profile of the host galaxy. These results and the formulae that are provided, most importantly, the one for the critical accretion parameter, allow for a direct evaluation of all flow properties, and are then useful for the abovementioned studies. As an application, we examine the departure from the true mass accretion rate of estimates obtained using the gas properties at various distances from the black hole, under the hypothesis of classical Bondi accretion. An overestimate is obtained from regions close to the black hole, and an underestimate outside a few Bondi radii; the exact position of the transition between the two kinds of departure depends on the galaxy model.

Uus ja uhke campus valmib aastaks 2010

Index Scriptorium Estoniae

2006-01-01

Tallinna Tehnikaülikooli haldusdirektor Henn Karits tutvustab ülikooli lähimate aastate ehitusplaane - peamaja rekonstrueerimist, majandus- ja humanitaarteaduskondade hoone ning raamatukogu uue hoone ehitamist. Uus campus sisaldab endas ka maa-aluse parkla, spordikompleksi, üliõpilasühiselamud

Uus Tants 7 / Mikko Orpana

Index Scriptorium Estoniae

Orpana, Mikko

2005-01-01

Tallinnas 2005. aasta märtsikuus toimunud tantsufestifalist "Uus tants 7". Pikemalt peatutakse Mart Kangro lavastusel "Out of Functions" ning Oksana Titova ja Taavet Janseni lavastusel "The Last Hairy", aga juttu on ka Renate Valme teosest "Mesta", samuti Tiina Olleski ja Rene Nõmmiku "Body Experience Time", Katrin Essensoni ja Taavi Eelmaa "The Thoughts with Manus" ja Krõõt Juuraku "Artistic Approach 3. I"

Uus moodsa kunsti muuseum / Maria-Kristiina Soomre

Index Scriptorium Estoniae

Soomre, Maria-Kristiina, 1978-

2000-01-01

Liechtensteini pealinnas Vaduzis avatakse uus moodsa ja kaasaegse kunsti muuseum, mis keskendub itaalia ja saksa kunstile. Hetke tähtteos - Umberto Boccioni "Kontinuiteedi unikaalsed vormid ruumis". Šveitsi Morger, Degelo ja Kerezi arhitektuuribüroo kavandatud hoone anti üle 12. nov.

Mai kinos linastub uus Eesti film "Kõrini!"

Index Scriptorium Estoniae

2006-01-01

Täna linastub Pärnus Eesti-Saksa koostööfilm "Kõrini" : režissöör Peeter Simm : osades Maarja Jakobson, Rasmus Kaljujärv, Heio von Stetten, Thomas Schmauser : Ruut Pictures (Eesti) - Saxonia Film (Saksa) 2005

Sir Hermann Bondi KCB

Science.gov (United States)

Roxburgh, Ian W.

2007-12-01

Hermann Bondi was an Applied Mathematician of distinction who will be remembered by fellow scientists for his outstanding contributions to astronomy, cosmology and General Relativity, and particularly for his pioneering contributions to our understanding of gravitational waves, his foundational work on accretion, and as co-creator with Tommy Gold and Fred Hoyle of the steady state theory of cosmology. But Hermann had an equally important second career in scientific administration: advising the UK Government on the Thames Barrier, as Director General of the European Space Research Organisation (ESRO; now the European Space Agency (ESA)), as Chief Scientific Advisor to the UK Government on Defence and then on Energy, as Chairman of the Natural Environmental Research Council (NERC), and finally as Master of Churchill College, Cambridge. He was knighted in 1973. He continued his research on gravitational radiation throughout his administrative career and published his 16th paper in the series on gravitational waves in 2004. Hermann will be remembered not only for his contributions to science and administration, but for his outstanding communication skills and as a charismatic, warm, and stimulating person.

Peeter Simmi uus film jõuab kinno

Index Scriptorium Estoniae

2006-01-01

Tallinna, Tartu ja Pärnu kinodes linastub homsest Eesti-Saksa koostööfilm "Kõrini" : režissöör Peeter Simm : osades Maarja Jakobson, Rasmus Kaljujärv, Heio von Stetten, Thomas Schmauser : Ruut Pictures (Eesti) - Saxonia Film (Saksa) 2005

Uus sugupõlv - kaotanud sugupõlv? / Liis Kolle

Index Scriptorium Estoniae

Kolle, Liis, 1971-

2013-01-01

Kolmest Berliinis nähtud Wagneri aasta üritusest: Näitus ja ürituste sari "Wagner 2013 - kunstnike positsioonid", üliõpilaste ühisprojekt "Armee. Neli operatsiooni Wagneri "Sõrmuse" kallal" ning koolinoorteprojekt ""Sõrmus": uus põlvkond"

Black Hole Entropy from Bondi-Metzner-Sachs Symmetry at the Horizon.

Science.gov (United States)

Carlip, S

2018-03-09

Near the horizon, the obvious symmetries of a black hole spacetime-the horizon-preserving diffeomorphisms-are enhanced to a larger symmetry group with a three-dimensional Bondi-Metzner-Sachs algebra. Using dimensional reduction and covariant phase space techniques, I investigate this augmented symmetry and show that it is strong enough to determine the black hole entropy in any dimension.

USA uus ÜRO saadik alustas pealetungi / Neeme Raud

Index Scriptorium Estoniae

Raud, Neeme, 1969-

2005-01-01

Ameerika Ühendriikide uus ÜRO suursaadik John Bolton nõuab 190 liikmesriigile saadetud kirjas ÜRO reformikavades suurte ja oluliste muudatuste tegemist: reformikavast peaks USA arvates kustutama vähemalt 400 paragrahvi

Uus omanik liidab Kalevi vabriku Poola tehasega / Andrus Karnau

Index Scriptorium Estoniae

Karnau, Andrus

2007-01-01

Kommivabriku Kalev ja piimatööstuse Tere uus omanik Indrek Rahumaa kavatseb ettevõtted liita Poola kommivabrikuga Mieszko ja Läti piimakombinaadiga Piensaimnieks, mille on ostnud Rahumaa enamusosalusega investeerimisfirma Alta Capital Partners. Lisa: CV

Maalikunsti uus trend süveneb / Ants Juske

Index Scriptorium Estoniae

Juske, Ants, 1956-2016

1998-01-01

Jaan Elkeni näitus "Ametroopia" ja Valeri Vinogradovi näitus "Triumfid ja austusavaldused" Vaal-galeriis.Uus suund maalikunstis on sõnumi edastamine graffiti-laadses vormis, kus pildi ja sõna seos on sama lahutamatu kui ikoonimaalis. Tekst kannab sõnumit ja on ka kujund

Uus punapass saab mikrokiibiga järglase / Aleksei Günter

Index Scriptorium Estoniae

Günter, Aleksei, 1979-

2005-01-01

Anti välja esimene uue kujundusega Eesti kodaniku pass, järgmisel aastal plaanib kodakondsus- ja migratsiooniamet võtta kasutusele biomeetrilise passi, mis on varustatud mikrokiibiga. Lisa: Uus pass

Uus korter ja midagi veel / Eve Kaunis

Index Scriptorium Estoniae

Kaunis, Eve

2008-01-01

Uus Maa kinnisvarabüroo eluruumide konsultant Eve Kaunis ostjate eelistustest korterite valikul. Peamised müügiargumendid on soodne hind ja rohked lisaväärtused. Näiteks toodud 2-toaline korter (sisekujundus: Aet Piel, 71 m2) Põhja-Tallinnas Eugen Sachariase projekti järgi ehitatud majas ja 3-toaline korter (66,4 m2) Keilas 1980. aastatel ehitatud elamus

Õppiv organisatsioon ja juhtimise uus paradigma / Harry Roots

Index Scriptorium Estoniae

Roots, Harry, 1950-2010

2004-01-01

Juhtimise uus paradigma tähendab varasemaga võrreldes märgatavalt soodsama õpikeskkonna loomist. Nii nagu igapäevane juhtimispraktika kujundab organisatsioonis domineerivat kultuuritüüpi, samamoodi see ka kas soodustab või tõkestab õppiva organisatsiooni kujunemist, leiab autor. Tabelid. Skeemid

Generalized Bondi-Sachs equations for characteristic formalism of numerical relativity

Science.gov (United States)

Cao, Zhoujian; He, Xiaokai

2013-11-01

The Cauchy formalism of numerical relativity has been successfully applied to simulate various dynamical spacetimes without any symmetry assumption. But discovering how to set a mathematically consistent and physically realistic boundary condition is still an open problem for Cauchy formalism. In addition, the numerical truncation error and finite region ambiguity affect the accuracy of gravitational wave form calculation. As to the finite region ambiguity issue, the characteristic extraction method helps much. But it does not solve all of the above issues. Besides the above problems for Cauchy formalism, the computational efficiency is another problem. Although characteristic formalism of numerical relativity suffers the difficulty from caustics in the inner near zone, it has advantages in relation to all of the issues listed above. Cauchy-characteristic matching (CCM) is a possible way to take advantage of characteristic formalism regarding these issues and treat the inner caustics at the same time. CCM has difficulty treating the gauge difference between the Cauchy part and the characteristic part. We propose generalized Bondi-Sachs equations for characteristic formalism for the Cauchy-characteristic matching end. Our proposal gives out a possible same numerical evolution scheme for both the Cauchy part and the characteristic part. And our generalized Bondi-Sachs equations have one adjustable gauge freedom which can be used to relate the gauge used in the Cauchy part. Then these equations can make the Cauchy part and the characteristic part share a consistent gauge condition. So our proposal gives a possible new starting point for Cauchy-characteristic matching.

Uus kava lükkab Kosovo iseseisvumise edasi / Jürgen Tamme

Index Scriptorium Estoniae

Tamme, Jürgen

2007-01-01

Uus ÜRO resolutsioonikava ei maini erivolinik Martti Ahtisaari välja pakutud ideed Kosovo piiratud iseseisvusest ja näeb ette vaid kõneluste taaselustamise Serbia ja sõltumatust taotleva Kosovo vahel. Vt. samas: Serbia ja Kosovo vägikaikavedu

Scalar perturbations on Lemaitre-Tolman-Bondi spacetimes

International Nuclear Information System (INIS)

Zibin, J. P.

2008-01-01

In recent years there has been growing interest in verifying the horizon-scale homogeneity of the Universe that follows from applying the Copernican principle to the observed isotropy. This program has been stimulated by the discovery that a very large void, centered near us, can explain supernova luminosity distance measurements without dark energy. It is crucial to confront such models with as wide a variety of data as possible. With this application in mind, we develop the relativistic theory of linear scalar perturbations on spherically symmetric dust (Lemaitre-Tolman-Bondi) spacetimes, using the covariant 1+1+2 formalism. We show that the evolution of perturbations is determined by a small set of new linear transfer functions. If decaying modes are ignored (to be consistent with the standard inflationary paradigm), the standard techniques of perturbation theory on homogeneous backgrounds, such as harmonic expansion, can be applied, and results closely paralleling those of familiar cosmological perturbation theory can be obtained.

"Uus tants 9" - kirju ja elujõuline / Evelin Lagle, Leenu Nigu

Index Scriptorium Estoniae

Lagle, Evelin

2009-01-01

19.-21. märtsini Tallinna teatrites ja saalides toimunud üheksandast Eesti uue tantsu ülevaatefestivalist "Uus Tants 9". Tantsulavastustest "Sula jagu", "Kahe korruse rahvas", "Can't Get No / Satisfaction", "Lokaalis täna: Kann/Valkeapää", "Kass ennustab tulevikku inimesest paremini", "Hoffmann-Promenade"

Tilted Lemaitre-Tolman-Bondi spacetimes: Hydrodynamic and thermodynamic properties

International Nuclear Information System (INIS)

Herrera, L.; Di Prisco, A.; Ibanez, J.

2011-01-01

We consider Lemaitre-Tolman-Bondi spacetimes from the point of view of a tilted observer, i.e. one with respect to which the fluid is radially moving. The imperfect fluid and the congruence described by its four-velocity, as seen by the tilted observer, is studied in detail. It is shown that from the point of view of such tilted observer, the fluid evolves nonreversibly (i.e. with nonvanishing rate of entropy production). The nongeodesic character of the tilted congruence is related to the nonvanishing of the divergence of the 4-vector entropy flow. We determine the factor related to the existence of energy-density inhomogeneities and describe its evolution; these results are compared with those obtained for the nontilted observer. Finally, we exhibit a peculiar situation where the nontilted congruence might be unstable.

Bondi-Hoyle-Lyttleton Accretion onto Binaries

Science.gov (United States)

Antoni, Andrea; MacLeod, Morgan; Ramírez-Ruiz, Enrico

2018-01-01

Binary stars are not rare. While only close binary stars will eventually interact with one another, even the widest binary systems interact with their gaseous surroundings. The rates of accretion and the gaseous drag forces arising in these interactions are the key to understanding how these systems evolve. This poster examines accretion flows around a binary system moving supersonically through a background gas. We perform three-dimensional hydrodynamic simulations of Bondi-Hoyle-Lyttleton accretion using the adaptive mesh refinement code FLASH. We simulate a range of values of semi-major axis of the orbit relative to the gravitational focusing impact parameter of the pair. On large scales, gas is gravitationally focused by the center-of-mass of the binary, leading to dynamical friction drag and to the accretion of mass and momentum. On smaller scales, the orbital motion imprints itself on the gas. Notably, the magnitude and direction of the forces acting on the binary inherit this orbital dependence. The long-term evolution of the binary is determined by the timescales for accretion, slow down of the center-of-mass, and decay of the orbit. We use our simulations to measure these timescales and to establish a hierarchy between them. In general, our simulations indicate that binaries moving through gaseous media will slow down before the orbit decays.

Hispaanias võtab võimust uus põlvkond / Leslie Crawford, Mark Mulligan ; tõlk. Erik Aru

Index Scriptorium Estoniae

Crawford, Leslie

2006-01-01

Mitmel põhjusel on Hispaania äri muutunud rahvusvahelisemaks, selle taga on uus ärijuhtide põlvkond, kes on hariduse omandanud mõnes ingliskeelses maailma elitaarses koolis. Lisa: Hispaania imeb 500-euroseid

On the structure and applications of the Bondi-Metzner-Sachs group

Science.gov (United States)

Alessio, Francesco; Esposito, Giampiero

This work is a pedagogical review dedicated to a modern description of the Bondi-Metzner-Sachs (BMS) group. Minkowski space-time has an interesting and useful group of isometries, but, for a generic space-time, the isometry group is simply the identity and hence provides no significant informations. Yet symmetry groups have important role to play in physics; in particular, the Poincaré group describing the isometries of Minkowski space-time plays a role in the standard definitions of energy-momentum and angular-momentum. For this reason alone it would seem to be important to look for a generalization of the concept of isometry group that can apply in a useful way to suitable curved space-times. The curved space-times that will be taken into account are the ones that suitably approach, at infinity, Minkowski space-time. In particular we will focus on asymptotically flat space-times. In this work, the concept of asymptotic symmetry group of those space-times will be studied. In the first two sections we derive the asymptotic group following the classical approach which was basically developed by Bondi, van den Burg, Metzner and Sachs. This is essentially the group of transformations between coordinate systems of a certain type in asymptotically flat space-times. In the third section the conformal method and the notion of “asymptotic simplicity” are introduced, following mainly the works of Penrose. This section prepares us for another derivation of the BMS group which will involve the conformal structure, and is thus more geometrical and fundamental. In the subsequent sections we discuss the properties of the BMS group, e.g. its algebra and the possibility to obtain as its subgroup the Poincaré group, as we may expect. The paper ends with a review of the BMS invariance properties of classical gravitational scattering discovered by Strominger, that are finding application to black hole physics and quantum gravity in the literature.

Black holes in the Universe: Generalized Lemaitre-Tolman-Bondi solutions

International Nuclear Information System (INIS)

Gao Changjun; Chen Xuelei; Shen Yougen; Faraoni, Valerio

2011-01-01

We present new exact solutions which presumably describe black holes in the background of a spatially flat, pressureless dark-matter- or dark matter plus dark energy (DM+DE)- or quintom-dominated Universe. These solutions generalize Lemaitre-Tolman-Bondi metrics. For a dark-matter- or (DM+DE)-dominated universe, the area of the black hole apparent horizon (AH) decreases with the expansion of the Universe while that of the cosmic AH increases. However, for a quintom-dominated universe, the black hole AH first shrinks and then expands, while the cosmic AH first expands and then shrinks. A (DM+DE)-dominated universe containing a black hole will evolve to the Schwarzschild-de Sitter solution with both AHs approaching constant size. In a quintom-dominated universe, the black hole and cosmic AHs will coincide at a certain time, after which the singularity becomes naked, violating cosmic censorship.

Uus linnaökoloogia = New Urban Ecology / Christopher Moller ; interv. Triin Ojari

Index Scriptorium Estoniae

Moller, Christopher

2005-01-01

Arhitekt Christopher Moller (sünd. 1961, Uus-Meremaa) rajas 1997. a. koos Burton Hamfelti (Kanada), Jonathan Woodroffe'i ja Dominic Papaga (Inglismaa) Amsterdamis büroo S333. Büroo lähenemisest linnaplaneerimisele, Europani võidutöö järgi valminud Groningeni elamukompleksist Schots 1+2, Nieuw-Vennepi linnakeskuse projektist (2000-), kvaliteetruumist, linnaökoloogiast, Tallinna ja siinsete arhitektide võimalustest jm. 7 ill

Siim Nestor soovitab : Hea Uus Heli. Vibe 5. sünnipäev / Siim Nestor

Index Scriptorium Estoniae

Nestor, Siim, 1974-

2003-01-01

Üritustest "Võlu Music" Mustpeade Majas 9. okt., "1ÖÖ%" Von Krahlis 10. okt., "Kontsert" Tartu Peetri kirikus 10. okt ja Tallinna Niguliste kirikus 11. okt., "Valge Laigu Klubi" Hobuveskis 11. okt. popmuusikafestivali "Hea Uus Heli" raames. Üritusest "Vibe" Liiva keskuses 11. oktoobril

Uus Eesti film pandi eile Karlovy Varys projektorisse / Kristiina Davidjants

Index Scriptorium Estoniae

Davidjants, Kristiina, 1974-

2008-01-01

8. juulil esilinastus Karlovy Vary filmifestivalil Rene Vilbre noortefilm "Mina olin siin", mille aluseks on Sass Henno romaan "Mina olin siin. Esimene arest". Film võistleb võistlusprogrammis "East of the West"

Dzheims Bond : v setjah shpionazha i ljubvi

Index Scriptorium Estoniae

2007-01-01

Bondi-film "007: Casino Royale" : režissöör Martin Campbell : Ameerika Ühendriigid - Suurbritannia 2006. Tegelaskujude ja süžee võrdlus Ian Flemingi kirjutatud raamatute ja teiste Bondi-filmidega

Area density of localization-entropy II: double cone-localization and quantum origin of the Bondi-Metzner-Sachs symmetry

Energy Technology Data Exchange (ETDEWEB)

Schroer, Bert

2006-04-15

The holographic encoding is generalized to subalgebras of QFT localized in double cones. It is shown that as a result of this radically different spacetime encoding the modular group acts geometrically on the holographic image. As a result we obtain a formula for localization entropy which is identical to the previously derived formula for the wedge-localized subalgebra. The symmetry group in the holographic encoding turns out to be the Bondi-Metzner-Sachs group. (author)

Bondi or not Bondi: the impact of resolution on accretion and drag force modelling for Supermassive Black Holes

Science.gov (United States)

Beckmann, R. S.; Slyz, A.; Devriendt, J.

2018-04-01

Whilst in galaxy-size simulations, supermassive black holes (SMBH) are entirely handled by sub-grid algorithms, computational power now allows the accretion radius of such objects to be resolved in smaller scale simulations. In this paper, we investigate the impact of resolution on two commonly used SMBH sub-grid algorithms; the Bondi-Hoyle-Lyttleton (BHL) formula for accretion onto a point mass, and the related estimate of the drag force exerted onto a point mass by a gaseous medium. We find that when the accretion region around the black hole scales with resolution, and the BHL formula is evaluated using local mass-averaged quantities, the accretion algorithm smoothly transitions from the analytic BHL formula (at low resolution) to a supply limited accretion (SLA) scheme (at high resolution). However, when a similar procedure is employed to estimate the drag force it can lead to significant errors in its magnitude, and/or apply this force in the wrong direction in highly resolved simulations. At high Mach numbers and for small accretors, we also find evidence of the advective-acoustic instability operating in the adiabatic case, and of an instability developing around the wake's stagnation point in the quasi-isothermal case. Moreover, at very high resolution, and Mach numbers above M_∞ ≥ 3, the flow behind the accretion bow shock becomes entirely dominated by these instabilities. As a result, accretion rates onto the black hole drop by about an order of magnitude in the adiabatic case, compared to the analytic BHL formula.

Lemaître-Tolman-Bondi dust solutions in f (R) gravity

Science.gov (United States)

Sussman, Roberto A.; Jaime, Luisa G.

2017-12-01

We derive a class of non-static inhomogeneous dust solutions in f(R) gravity described by the Lemaître-Tolman-Bondi (LTB) metric. The field equations are fully integrated for all parameter subcases and compared with analogous subcases of LTB dust solutions of GR. Since the solutions do not admit regular symmetry centres, we have two possibilities: (i) a spherical dust cloud with angle deficit acting as the source of a vacuum Schwarzschild-like solution associated with a global monopole, or (ii) fully regular dust wormholes without angle deficit, whose rest frames are homeomorphic to the Schwarzschild-Kruskal manifold or to a 3d torus. The compatibility between the LTB metric and generic f(R) ansatzes furnishes an ‘inverse procedure’ to generate LTB solutions whose sources are found from the f(R) geometry. While the resulting fluids may have an elusive physical interpretation, they can be used as exact non-perturbative toy models in theoretical and cosmological applications of f(R) theories.

Muusikamaail. "Musica nova" Helsingis. Händeli festival Karlsruhes. Ooperikonkurss algas. Preemiaid ja tunnustusi. Ka Parmas uus ooperimaja. / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

2002-01-01

Soomes toimuvast uue muusika festivalist. Händeli festivalist Karlsruhes. Üle-euroopalisest noorte ooperilauljate konkursist. Ooperilaulja Doris Soffel sai Rootsi riigilt Kuningliku Põhjatähe ordeni. Sebastian Baumgarten sai ooperi "Tosca" eest noore režissööri preemia. Parmas valmis uus ooperimaja

Uus sünagoog pani juudid tantsima / Peeter Kuimet, Kaia Otti

Index Scriptorium Estoniae

Kuimet, Peeter

2007-01-01

Tallinnas Karu tänaval avati 16. mail 2007 uus juudi sünagoog, avamistseremoonial viibisid Iisraeli asepeaminister Shimon Peres, Eesti president Toomas Hendrik Ilves, peaminister Andrus Ansip, Venemaa pearabi Berl Lazar, Iisraeli pearabi Yona Metzger ja sünagoogi suurrahastaja Aleksander Bronshtein. President Toomas Hendrik Ilves viitas oma kõnes paralleelidele eestlaste ja juutide ajaloos. Vt. samas: Juutide usk, kombed ja toit; Sünagoogi avamist kommenteerivad meediaõppejõud Hagi Shein, dirigent Eri Klas. Vt. samas: Peres: elevantide keskel on väikestel raske magada. Ilmunud ka: Postimees : na russkom jazõke 17. mai 2007, lk. 2; Narvskaja Gazeta, 19. mai 2007, lk. 6 (autor Ksenia Repson)

Gauge invariant perturbations of self-similar Lemaitre-Tolman-Bondi spacetime: Even parity modes with l≥2

International Nuclear Information System (INIS)

Waters, Thomas J.; Nolan, Brien C.

2009-01-01

In this paper we consider gauge invariant linear perturbations of the metric and matter tensors describing the self-similar Lemaitre-Tolman-Bondi (timelike dust) spacetime containing a naked singularity. We decompose the angular part of the perturbation in terms of spherical harmonics and perform a Mellin transform to reduce the perturbation equations to a set of ordinary differential equations with singular points. We fix initial data so the perturbation is finite on the axis and the past null cone of the singularity, and follow the perturbation modes up to the Cauchy horizon. There we argue that certain scalars formed from the modes of the perturbation remain finite, indicating linear stability of the Cauchy horizon.

Skype'i uus boss : kasum pole kõige tähtsam / Josh Silverman ; interv. Toivo Tänavsuu

Index Scriptorium Estoniae

Silverman, Josh

2008-01-01

Skype'i uus juht vastab küsimustele, mis annab garantii, et Skype suudab olla edukas ka tasuliste teenustega, millised võimalused on Skype'i kasutajal 3 aasta pärast, mis Skype'i Eestis hoiab, kui terav on probleem väljastpoolt EL-i tööjõu värbamisega, milline oli tema roll USA demokraatide presidendikandidaadiks pürgiva Bill Bradley meeskonnas. Lisa: 100 miljardit tasuta kõneminutit

Initial-boundary-value problem of the self-gravitating scalar field in the Bondi-Sachs gauge

International Nuclear Information System (INIS)

Frittelli, Simonetta; Gomez, Roberto

2007-01-01

It is shown that, in the Bondi-Sachs gauge that fixes the speed of incoming light rays to the value 1, the Einstein equations coupled to a scalar field in spherical symmetry are cast into a symmetric-hyperbolic system of equations for the scalar field, lapse and shift as fundamental variables. In this system of equations, the lapse and shift are incoming characteristic fields, and the scalar field has three components: incoming, outgoing and static. A constraint-preserving boundary condition is prescribed by imposing the projection of the Einstein equation normal to the boundary at the outer value of the radial coordinate. The boundary condition specifies one of the two incoming metric fields. The remaining incoming metric field and the incoming scalar field component need to be specified arbitrarily. Numerical simulations of the scattering of the scalar field by a black hole in the nonlinear regime are presented that illustrate interesting facts about black-hole physics and the behavior of the characteristic variables of the problem

Obtaining the time evolution for spherically symmetric Lemaitre-Tolman-Bondi models given data on our past light cone

International Nuclear Information System (INIS)

Araujo, M. E.; Stoeger, W. R.

2009-01-01

A rigorous demonstration that given appropriate data on our past light cone leads to the determination of the metric functions and all their time derivatives on our past light cone is presented, thus showing how to evolve the solution we obtain from data on the light cone off it in a well-defined and straightforward way. It also automatically gives a procedure for constructing the solution for all spherically symmetric, inhomogeneous cosmological Lemaitre-Tolman-Bondi models in observational coordinates as a Taylor series in time of however many terms we need. Our procedure takes into account the essential data giving the maximum of the observer area (angular-diameter) distance, and the redshift z max at which that occurs. This enables the determination of the vacuum-energy density μ Λ , which would otherwise remain undetermined.

Axially symmetric two-body problem in general relativity. III. Bondi mass loss and the failure of the quadrupole formula

International Nuclear Information System (INIS)

Cooperstock, F.I.; Hobill, D.W.

1979-01-01

Suggested difficulties and criticism regarding earlier work is addressed. It is demonstrated that the rate of gravitational energy loss from the authors' model free-fall system employing the widely accepted Bondi method agrees precisely with the results described in prior works. Origins of the breakdown of the quadrupole formalism for free fall, previously indicated, are now delineated in detail. The role of source structure in the energy loss rate re-emerges, bringing into question much of the earlier work of others. The iterative technique with flat-space wave operators is justified. A new approach to quasiperiodic systems such as binary stars is described. Ideally modeled upon the actual birth of such systems, it evolves from an initially stationary configuration, again avoiding the problems and ambiguities regarding incoming radiation

Evolution of radial profiles in regular Lemaitre-Tolman-Bondi dust models

International Nuclear Information System (INIS)

Sussman, Roberto A

2010-01-01

We undertake a comprehensive and rigorous analytic study of the evolution of radial profiles of covariant scalars in regular LemaItre-Tolman-Bondi (LTB) dust models. We consider specifically the phenomenon of 'profile inversions' in which an initial clump profile of density, spatial curvature or the expansion scalar might evolve into a void profile (and vice versa). Previous work in the literature on models with density void profiles and/or allowing for density profile inversions is given full generalization, with some erroneous results corrected. We prove rigorously that if an evolution without shell crossings is assumed, then only the 'clump to void' inversion can occur in density profiles, and only in hyperbolic models or regions with negative spatial curvature. The profiles of spatial curvature follow similar patterns as those of the density, with 'clump to void' inversions only possible for hyperbolic models or regions. However, profiles of the expansion scalar are less restrictive, with profile inversions necessarily taking place in elliptic models. We also examine radial profiles in special LTB configurations: closed elliptic models, models with a simultaneous big bang singularity, as well as a locally collapsing elliptic region surrounded by an expanding hyperbolic background. The general analytic statements that we obtain allow for setting up the right initial conditions to construct fully regular LTB models with any specific qualitative requirements for the profiles of all scalars and their time evolution. The results presented can be very useful in guiding future numerical work on these models and in revising previous analytic work on all their applications.

Uus postimüügikataloog üritab end Eesti turule sisse süüa sõbra soovituste kaudu / Eda-Liis Kann, Tiina Kilkson

Index Scriptorium Estoniae

Kann, Eda-Liis, 1979-

2005-01-01

TNS Emori uuring kinnitab, et kaks kolmandikku Eesti inimestest on valmis tegema sõprade soovitusel olulisi ostuotsuseid. Sellest lähtub ka Eesti ja Läti turule tulnud uus postimüügikataloog Neckermann, kes kasutab oma nn ekspertprogrammis ekspertidena tavalisi inimesi erinevatelt elualadelt. Vt. samas: Naistele meeldib katalooge lapata; Kataloogidele Eestis ruumi jagub; Ellos lõpetas Eestis postimüügi

Muusikamaailm. Magnus Lindbergi festivali jätk. Jonas Forsell taas ooperijuhiks. Marcello Panni uus ooper. György Kurtagile Sonningi preemia. Peter Gradenwitz lahkunud / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

2002-01-01

Soome helilooja Magnus Lindbergi mitmeid teoseid esitatakse Inglismaal. Rootsi heliloojast Jonas Forsellist sai jaanuaris Kopenhaageni trupi Den Anden Opera kunstiline juht. Firenzes tuli esiettekandele Marcello Panni uus ooper "The Banquet ئ Talking about Love". Helilooja György Kurtag pälvis Taani 2003.a. Leonie Sonningi muusikapreemia. 91aastasena suri muusikateadlane Peter Gradenwitz

Rein Maran - Eesti looduse saadik maailmas / Rein Maran ; interv. Andres Laasik

Index Scriptorium Estoniae

Maran, Rein, 1931-

2005-01-01

Loodusfilmide meistril on esilinastunud uus film "Eesti kotkad". Lisad : "Rein Maran", "Digitaaltehnika muudab looduse elavamaks", "Eesti kõik kotkaliigid on kindlalt purgis", "Üliõpilased on Rein Maranile tänulikud"

Konstrueerides superspiooni / Andris Feldmanis

Index Scriptorium Estoniae

Feldmanis, Andris, 1982-

2008-01-01

Bondi-film "007: Veidi lohutust" ("Quantum of Solace") : režissöör Marc Foster : produtsent Barbara Broccoli jt : osades Daniel Craig, Mathieu Amalric, Olga Kurilenko, Giancarlo Giannini jt : Suurbritannia - Ameerika Ühendriigid 2008

Meid kõiki on kord reedetud / Raivo Järvi

Index Scriptorium Estoniae

Järvi, Raivo, 1954-2012

2008-01-01

Bondi-film "007: Veidi lohutust" ("Quantum of Solace") : režissöör Marc Foster : produtsent Barbara Broccoli jt : osades Daniel Craig, Mathieu Amalric, Olga Kurilenko, Giancarlo Giannini jt : Suurbritannia - Ameerika Ühendriigid 2008

Õuduste isanda revansh / Karlo Funk

Index Scriptorium Estoniae

Funk, Karlo, 1971-

2002-01-01

Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse isand : Sõrmuse vennaskond" ("The Lord of the Rings : The Fellowship of the Ring") : Uus-Meremaa, Ameerika Ühendriigid 2001

Elust suurem seiklus / Laurence Lumiere

Index Scriptorium Estoniae

Lumiere, Laurence

2002-01-01

Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse vennaskond", "The Lord of the Rings : The Fellowship of the Ring" : Uus-Meremaa, Ameerika Ühendriigid 2001. Ka : Teleleht nr. 3, lk. 43

Uroki elfiiskogo / Nikolai Karajev

Index Scriptorium Estoniae

Karajev, Nikolai, 1978-

2002-01-01

Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse vennaskond", "The Lord of the Rings : The Fellowship of the Ring" : Uus-Meremaa, Ameerika Ühendriigid 2001. Tolkieni loodud maailmast ja selle kujutamisest filmis

Paris, Texas. Saksamaal ja sinu peas / Kairi Prints

Index Scriptorium Estoniae

Prints, Kairi

2010-01-01

6.- 12. oktoobrini Tallinnas ja Tartus toimuval filmifestivalil "Uus Saksa Kino" saab vaadata Wim Wendersi muusikadokumentaale. "Film ja filosoofia" rubriigis koha- ja rahvusespetsiifika eksistentsist tänapäeva filmikunstis ja W. Wendersi filmist "Paris, Texas" (USA 1984)

Muusika. Viis aastat Elleri muusikapreemiat. Asutati MTÜ Eesti Muusikafestivalid. Mati Palm taas Moskvas. Trio Romanss Helsingis. Rondelluse uus CD. Noored tshellistid jälle koos / Alo Põldmäe

Index Scriptorium Estoniae

Põldmäe, Alo, 1945-

2002-01-01

Viiendat korda välja antavad Heino Elleri muusikapreemiaid said sel korral T. Steiner, A. Juozepenaite-Eesmaa ja T. Kaljuste. 5. III asutati Kultuuriministeeriumis MTÜ Eesti Muusikafestivalid. Mati Palm esines Moskvas Venemaa Kultuurifondi saalis. Trio Romanss esines veebruari lõpus Helsingis. Vanamuusika ansamblilt Rondellus ilmus uus CD "Sabbatum". 2.III leidis Tartus H. Elleri Muusikakoolis aset II Eesti noorte tshellistide festival

Vrutshenõ prizõ 25-go festivalja fantastiki

Index Scriptorium Estoniae

2007-01-01

Brrüsseli ulmefilmide rahvusvahelise festivali peapreemia - Kuldse Ronga (Golden Raven) võitis korealase Joon-ho Bongi film "The Host", Hõbedase Ronga said korealase Dong-ho Cho "Rahutu" ("The Restless") ja uus-meremaalase Jonathan Kingi "Must lammas" ("Black Sheep")

"Nu, pogodi!" vozvrashtshajetsja / Tatjana Rostova

Index Scriptorium Estoniae

Rostova, Tatjana

2005-01-01

Populaarsele vene animafilmile "Oota sa!" ("Nu, pogodi!") valmis stuudios Christmas Films uus, 19. osa, mis tuleb ekraanile novembris. Filmi stsenarist on Aleksandr Kurljandski ja režissöör vana multifilmi tegija režissöör Vjatsheslav Kotjonotshkini poeg Aleksei

Matsalus võitis film rebaste elust / Tiit Tuumalu

Index Scriptorium Estoniae

Tuumalu, Tiit, 1971-

2003-01-01

Matsalu I rahvusvaheline loodusfilmide festival "Roheline värav". Peapreemia sai Uus-Meremaa - Rootsi "Siberi ellujääjad" ("Natural History"), esimese preemia sai Liivo Niglase "Brigaad", teist preemiat jagasid soomlase Harri Paavola "Tuhat pilti ledoravast" ja venelase Vassili Sarana "Lumelamba maa". Žürii esimees oli Rein Maran

Mis on "Sõrmuste isanda" edu saladus?

Index Scriptorium Estoniae

2002-01-01

Toimetuse küsimusele vastavad Ilmar Raag ja Peep Pedmanson. Küsimuse all on Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse vennaskond", "The Lord of the Rings : The Fellowship of the Ring" : Uus-Meremaa, Ameerika Ühendriigid 2001

Tumedad tulevikunägemused kinolinal / Marianne Kõrver

Index Scriptorium Estoniae

Kõrver, Marianne, 1980-

2007-01-01

Sõpruse kinos 13. aprillil linastunud kahest filmist - eesti uus lühimängufilm, Sass Henno jutustuse põhjal, režissöör Mihkel Ulk "Südameasjad" ja norra režissööri Jens Lieni film "Tüütu mees" ("Den Brysomme mannen")

Muusikamaailm : Gaudeamuse muusikanädal Amsterdamis. The Last Night of the Prom"s. Uusaastakontsert tuleb Uus-Meremaalt. Baieri Riigiooperi orkestri Euroopa reis. Kimanen jääb aastaks eemale Kuhmost / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

1999-01-01

12. sept. lõppes Amsterdamis Gaudeamuse rahvusvaheline muusikanädal "Surprising New Sounds". Promenaadikontserdid Londoni Royal Albert Hallis (16.07-11.09) lõppesid suure lõppkontserdiga. Traditsioonilise uusaastakontserdi asemel Viinis kantakse sel aastavahetusel üle kontsert Uus-Meremaalt Gisborne"ist. Seoses R. Straussi mälestusaastapäevaga toimus Baieri Riigiooperi orkestri ringreis Euroopas. 30 aastat Kuhmo kammermuusikafestivali juhtinud S. Kimanen võtab aasta puhkust

Phenomenological constraints on Lemaître-Tolman-Bondi cosmological inhomogeneities from solar system dynamics

Science.gov (United States)

Iorio, Lorenzo

2010-06-01

We, first, analytically work out the long-term, i.e. averaged over one orbital revolution, perturbations on the orbit of a test particle moving in a local Fermi frame induced therein by the cosmological tidal effects of the inhomogeneous Lemaître-Tolman-Bondi (LTB) model. The LTB solution has recently attracted attention, among other things, as a possible explanation of the observed cosmic acceleration without resorting to dark energy. Then, we phenomenologically constrain both the parameters K1 doteq ddot frakR / frakR and K2 doteq ddot frakR' / frakR' of the LTB metric in the Fermi frame by using different kinds of solar system data. The corrections Δdot varpi to the standard Newtonian/Einsteinian precessions of the perihelia of the inner planets recently estimated with the EPM ephemerides, compared to our predictions for them, yield preliminarily K1 = (4±8) × 10-26 s-2, K2 = (3±7) × 10-23 s-2. The residuals of the Cassini-based Earth-Saturn range, compared with the numerically integrated LTB range signature, allow to preliminarily obtain K1 approx K2 approx 10-27 s-2. Actually, the LTB effects should be explicitly modeled in the ephemerides softwares, so that the entire planetary and spacecraft data sets should be accordingly re-processed. The LTB-induced distortions of the orbit of a typical object of the Oort cloud with respect to the commonly accepted Newtonian picture, based on the observations of the comet showers from that remote region of the solar system, point towards K1 approx K2lesssim10-30-10-32 s-2. Such figures have to be compared with those inferred from cosmological data which are of the order of K1 approx K2 = -4 × 10-36 s-2.

Täna esilinastub uus Eesti mängufilm

Index Scriptorium Estoniae

2006-01-01

Täna Tallinnas, homsest ka Tartu ja Pärnu kinodes linastub Eesti-Saksa koostööfilm "Kõrini" : režissöör Peeter Simm : osades Maarja Jakobson, Rasmus Kaljujärv, Heio von Stetten, Thomas Schmauser : Ruut Pictures (Eesti) - Saxonia Film (Saksa) 2005

Black holes in radiation-dominated gas: an analogue of the Bondi accretion problem

International Nuclear Information System (INIS)

Begelman, M.C.

1978-01-01

Black holes, unlike other compact objects, are able to accrete matter more rapidly than their Eddington rate (dM/dt)sub(E) = Lsub(E)/c 2 . Nevertheless, at such a high dM/dt, radiation will probably be emitted by the in-falling gas in copious enough quantities to have a profound influence on the flow. To aid in understanding the nature of this influence a study is made of the steady flow, on to a stationary Schwarzchild black hole, of a uniform, non-relativistic gas in which radiation pressure swamps thermal pressure at infinity, and in which Thomson scattering provides the only radiation-gas couple. Asymptotic radiation pressure p (infinity) and matter density rho(infinity) determine an asymptotic sound speed c(infinity), from which one can derive an accretion rate (dM/dt)sub(B) corresponding to the adiabatic flow of a γ = 4/3 gas. The actual accretion rate depends on the optical depth tausub(B) of a column of unperturbed gas spanning the Bondi radius, rsub(B) = GM/c 2 (infinity). If tau > ((square root of 2)/3) (c/c(infinity)), then the flow is adiabatic, and dM/dt (dM/dt)sub(B). For a somewhat smaller tausub(B), diffusion is efficient enough for the radiation to leak out of the gas as it moves towards the trans-sonic point. As a result, the sound speed decreases inwards in the subsonic region, while the density must increase steeply to maintain pressure balance. dM/dt may then exceed (dM/dt)sub(B) by a factor of up to ((square root of 2)/3) (c/tausub(B)c (infinity)), although this effect can be limited by thermal pressure. Finally, for small enough tausub(B) the diffusion approximation breaks down, and radiation drag limits an otherwise thermally-determined dM/dt. Our boundary conditions occur within supermassive (M/M (solar mass) approximately >10 2 ) stars, and in the pre- and post-recombination universe. (author)

Huvitavat lisa Austraaliast Eesti mäluasutustele / Anne Valmas

Index Scriptorium Estoniae

Valmas, Anne, 1941-2017

2007-01-01

Eesti Arhiiv Austraalias säilitab meie kultuurile olulist vaimuvara - trükiseid, käsikirju, fotosid, filme, mälestusesemeid. Näitusest Sydney Powerhouse Museumìs "Our new home - Meie uus kodu: Estonian-Australian Stories", kus eksponaatidena kasutati arhiivi materjale, näitusest Wollondilly kultuuripärandi keskuses

Uus film tegi Raagist tegija / Andres Keil

Index Scriptorium Estoniae

Keil, Andres, 1974-

2005-01-01

Eesti Televisiooni fiktiivne dokumentaaldraama "August 1991" : stsenarist ja režissöör Ilmar Raag : produtsent Gerda Kordemets : operaator Janno-Hans Arro. Lisatud augustiputshi ajal teletorni kaitsnud Jüri Joosti ja Peeter Milli kommentaar

Kuidas valmis spektaakel nimega "Sõrmuste isand" / Timo Diener

Index Scriptorium Estoniae

Diener, Timo

2002-01-01

Kinodes jookseb Peter Jacksoni esimene film J.R.R. Tolkieni triloogia "Sõrmuste isand" alusel - "Sõrmuse vennaskond", "The Lord of the Rings : The Fellowship of the Ring" : Uus-Meremaa, Ameerika Ühendriigid 2001. Kuidas see kõik teoks sai. Ka arv- ja muid andmeid ürituse mastaapide kohta. Järgneb nr-tes 21, 22, 2002, lk. 44-45 : ill

Investigations of the Local supercluster velocity field. II. A study using Tolman-Bondi solution and galaxies with accurate distances from the Cepheid PL-relation

Science.gov (United States)

Ekholm, T.; Lanoix, P.; Teerikorpi, P.; Paturel, G.; Fouqué, P.

1999-11-01

A sample of 32 galaxies with accurate distance moduli from the Cepheid PL-relation (Lanoix \\cite{Lanoix99}) has been used to study the dynamical behaviour of the Local (Virgo) supercluster. We used analytical Tolman-Bondi (TB) solutions for a spherically symmetric density excess embedded in the Einstein-deSitter universe (q_0=0.5). Using 12 galaxies within Theta =30degr from the centre we found a mass estimate of 1.62M_virial for the Virgo cluster. This agrees with the finding of Teerikorpi et al. (\\cite{Teerikorpi92}) that TB-estimate may be larger than virial mass estimate from Tully & Shaya (\\cite{Tully84}). Our conclusions do not critically depend on our primary choice of the global H_0=57 km s-1 Mpc{-1} established from SNe Ia (Lanoix \\cite{Lanoix99}). The remaining galaxies outside Virgo region do not disagree with this value. Finally, we also found a TB-solution with the H_0 and q_0 cited yielding exactly one virial mass for the Virgo cluster.

Punk film kodanikuühiskonnast / Artur Talvik, Peeter Vihma, Jaan Tootsen ; intervjueerinud Andrei Liimets

Index Scriptorium Estoniae

Talvik, Artur, 1964-

2013-01-01

Tallinna Uue Maailma kogukonnast rääkivast režissöör Jaan Tootseni ja produtsent Jaak Kilmi dokumentaalfilmist "Uus Maailm". Arutlus teemal, milline on kohaliku kogukonna ja milline riiklike ning kohalike institutsioonide roll paikkonna elu suunamisel ja koordineerimisel, nende omavaheline mõju

Moja Nadja ujehhala / Vadim Retshkalov

Index Scriptorium Estoniae

Retshkalov, Vadim

2008-01-01

Eldar Rjazanovi menufilmi "Saatuse iroonia ehk Hüva leili!" (1975) järjefilm "Saatuse iroonia: lugu läheb edasi" ("Ironija sudbõ. Prodolzhenije") : režissöör Timur Bekmambetov : Venemaa 2007. Uus film ei haaku vanaga selle kultuurikihi puudumise tõttu, mis peegeldub vanas näiteks Mikael Tariverdijevi muusika ja seal kasutatud vene poeesia tõttu

Deniel Kreig : Polutshiv rol Dzheimsa Bonda, ja napilsja ot stshastja! / Daniel Craig ; interv. Stass Tõrkin

Index Scriptorium Estoniae

Craig, Daniel

2006-01-01

Ajakirjanikud Londonis uue Bondi-filmi "007: Casino Royale" esilinastusel ja pressikonverentsil. Näitleja Daniel Craig räägib endast, oma Bondi karakterist. Lisaks kõigi Bondi osatäitjate lühiandmed "Vse sekretnõje agentõ", kuulsaimad Bondi tüdrukud "7 samõh seksualnõh devushek agenta 007"

David Bruce Payton : väikeriigid mõistavad üksteist / David Bruce Payton ; interv. Marianne Mikko

Index Scriptorium Estoniae

Payton, David Bruce

2003-01-01

Uus-Meremaa suursaadik Eestis David Bruce Payton talupidaja toetamise loobumisest Uus-Meremaal, Uus-Meremaa põllumajandussektorist, veinidest, ekspordist, Eesti saamisest EL-i ja NATO liikmeks, Uus-Meremaa rahvastikust, elatustasemest, Iraagi võimalikust ründamisest, Põhja-Koreast

Loomingu eluandev jõud / Siim Angerpikk

Index Scriptorium Estoniae

Angerpikk, Siim

2015-01-01

Maailmafilmi festivali raames linastuvatest filmidset "Gualdino üheksas elu" (rež. Filipe Araújo), Portugal-Prantsusmaa; "C-minoori eripärad (rež. Ollie Lucks, Max Bellamy), Uus-Meremaa; "Salto Mortale" (rež. Guillaume Kozakiewiez), Prantsusmaa-Šveits;"Tantsud Mariaga" (rež. Ivan Gergolet), Itaalia-Argentiina-Sloveenia. Filme ühendab loomeinimeste püüd üleatda takistusi ja piire oma igapäevatöös.

Rohelise maa uus film vallutab Euroopat / Margit Tõnson

Index Scriptorium Estoniae

Tõnson, Margit, 1978-

2004-01-01

Iiri filmiprogrammis "Green Screen", mille on koostanud Iiri Filmiinstituut ja Iiri Filminõukogu Euroopa Liitu astuvate riikide jaoks, võib kinos "Sõprus" näha kaheksat uuemat filmi. Tutvustavalt kolmest mängufilmist : Kirsten Sheridani "Diskopõrsad", Liz Gilli "Kuldkala mälu" ja Aisling Walshi "St Jude'i vangid"

Uus Harry Potteri film noolib rekordeid / Kaarel Kressa

Index Scriptorium Estoniae

Kressa, Kaarel, 1983-

2010-01-01

19. novembril 2010 esilinastub Eestis Harry Potteri sarja uue filmi "Harry Potter ja surma vägised" (USA, Suurbritannia, 2010) 1. osa, režissöör David Yates. Filmi juba näinud kriitikute arvamusest. Filmi 2. osa linastub 2011. a. juulis

Scorsese uus ametipost / Martin Scorsese ; interv. Kristiina Davidjants

Index Scriptorium Estoniae

Scorsese, Martin

2007-01-01

Martin Scorsese asutas koos teiste režissööridega 1990. aastal filmifondi The Film Foundation, mille eesmärgiks on vanade filmide restaureerimine ja säilitamine. Režissöör rääkis ajakirjanikega 2006. aasta Rooma filmifestivalil

Characteristics of transonic spherical symmetric accretion flow in Schwarzschild-de Sitter and Schwarzschild anti-de Sitter backgrounds, in pseudo-general relativistic paradigm

Science.gov (United States)

Ghosh, Shubhrangshu; Banik, Prabir

2015-07-01

In this paper, we present a complete work on steady state spherically symmetric Bondi type accretion flow in the presence of cosmological constant (Λ) in both Schwarzschild-de Sitter (SDS) and Schwarzschild anti-de Sitter (SADS) backgrounds considering an isolated supermassive black hole (SMBH), with the inclusion of a simple radiative transfer scheme, in the pseudo-general relativistic paradigm. We do an extensive analysis on the transonic behavior of the Bondi type accretion flow onto the cosmological BHs including a complete analysis of the global parameter space and the stability of flow, and do a complete study of the global family of solutions for a generic polytropic flow. Bondi type accretion flow in SADS background renders multiplicity in its transonic behavior with inner "saddle" type and outer "center" type sonic points, with the transonic solutions forming closed loops or contours. There is always a limiting value for ∣Λ∣ up to which we obtain valid stationary transonic solutions, which correspond to both SDS and SADS geometries; this limiting value moderately increases with the increasing radiative efficiency of the flow, especially correspond to Bondi type accretion flow in SADS background. Repulsive Λ suppresses the Bondi accretion rate by an order of magnitude for relativistic Bondi type accretion flow for a certain range in temperature, and with a marginal increase in the Bondi accretion rate if the corresponding accretion flow occurs in SADS background. However, for a strongly radiative Bondi type accretion flow with high mass accretion rate, the presence of cosmological constant do not much influence the corresponding Bondi accretion rate of the flow. Our analysis show that the relic cosmological constant has a substantial effect on Bondi type accretion flow onto isolated SMBHs and their transonic solutions beyond length-scale of kiloparsecs, especially if the Bondi type accretion occurs onto the host supergiant ellipticals or central

Notes on New Number / Martin Rünk

Index Scriptorium Estoniae

Rünk, Martin, 1982-

2016-01-01

Kunstiprojekt-ajakiri Uus Number! on kogumik, mis sisaldab kultuuri- ja kunstiekspertide sissevaateid kultuuri ja kunsti kommunikatsiooni, on järg 2014. a. avaldatud kunstiprojekt-ajakirjale Uus Materjal. Väljaandja MTÜ Uus Materjal kolleegium - Madli Ehasalu, Marten Esko, Viktor Gurov, Eva-Erle Lilleaed, Evelyn Raudsepp, Brigita Reinert, Eda Tuulberg

Uus raamat tõstis Potteri-palaviku haripunkti / Mari Rebane

Index Scriptorium Estoniae

Rebane, Mari

2007-01-01

Eestis esilinastus 20. juulil Harry Potteri viies film "Harry Potter ja Fööniksi ordu" ("Harry Potter and the Order of the Phoenix"), režissöör David Yates : Ameerika Ühendriigid-Suurbritannia 2007. Alates 21. juulist saab osta seitsmendat ja ühtlasi viimast J. K. Rowlingu Potteri-sarja raamatut "Harry Potter and the Deathly Hallows"

Hot Accretion onto Black Holes with Outflow

Directory of Open Access Journals (Sweden)

Park Myeong-Gu

2018-01-01

Full Text Available Classic Bondi accretion flow can be generalized to rotating viscous accretion flow. Study of hot accretion flow onto black holes show that its physical charateristics change from Bondi-like for small gas angular momentum to disk-like for Keperian gas angular momentum. Especially, the mass accretion rate divided by the Bondi accretion rate is proportional to the viscosity parameter alpha and inversely proportional to the gas angular momentum divided by the Keplerian angular momentum at the Bondi radius for gas angular momentum comparable to the Keplerian value. The possible presence of outflow will increase the mass inflow rate at the Bondi radius but decrease the mass accretion rate across the black hole horizon by many orders of magnitude. This implies that the growth history of supermassive black holes and their coevolution with host galaxies will be dramatically changed when the accreted gas has angular momentum or develops an outflow.

Cálculo K: uma abordagem alternativa para a relatividade especial

OpenAIRE

Conto,G. De; Lima,A.; Ortega,P.H.; Schmitz,E.R.

2013-01-01

Neste artigo apresentamos a abordagem alternativa feita por Bondi para a teoria da relatividade especial. Durante o desenvolvimento, analisamos os diagramas de Bondi, recursos visuais dos quais podemos retirar algumas informações sobre os sistemas analisados, e discutimos o fator K da teoria de Bondi, que está no cerne deste trabalho. Posteriormente, discutimos alguns dos principais resultados obtidos pela relatividade especial de Einstein tais como a dilatação temporal, a contração espacial ...

K calculus: an alternative approach to special relativity

OpenAIRE

Conto, G. De; Lima, A.; Ortega, P.H.; Schmitz, E.R.

2013-01-01

Neste artigo apresentamos a abordagem alternativa feita por Bondi para a teoria da relatividade especial. Durante o desenvolvimento, analisamos os diagramas de Bondi, recursos visuais dos quais podemos retirar algumas informações sobre os sistemas analisados, e discutimos o fator K da teoria de Bondi, que está no cerne deste trabalho. Posteriormente, discutimos alguns dos principais resultados obtidos pela relatividade especial de Einstein tais como a dilatação temporal, a contração espacial ...

KEPUASAN NASABAH TERHADAP BANK DAN DANA PIHAK KETIGA UNIT USAHA SYARIAH BNI

Directory of Open Access Journals (Sweden)

Is Eka Herawati

2013-03-01

Full Text Available Development of Islamic syariah banking industry still has its drawback, some of it were peoples understanding on the bank operational, narrow network, and limited skilled of human resources on syariah bank. The development of syariah bank depends on its ability to deliver excellent services to people who need product and service of Islamic syariah bank. One measure of excellent service and product is customer satisfaction. The result of this study showed that the reason in choosing BNI Syariah was not only religious factor but its quality of service which should be improved. In general, UUS BNI performance in all attributes of bank and deposit fund product have not satisfied its customers because there were still discrepancies between their actual and expected services. The most importance bank attributes according to the respondents were strategic location, branches network, credibility, professionalism, syariah ideology and hospitality. The most importance deposit fund product attributes according to the respondens were security of fund, convenience procedure of fund withdrawal, profit and loss sharing principle and technology. According to the results there were 4 (four options of marketing strategies recommended to UUS BNI in order to be more competitive in the market. Firstly, UUS BNI has to be able to create image as Islamic and professional banking. Secondly, UUS BNI has to develop market through additional of branches. Thirdly, UUS BNI has to improve its technology by adding features on ATM technology. Fourthly, UUS BNI has to offer more attractive profit sharing. Perkembangan perbankan syariah masih memiliki banyak hambatan, antara lain pemahaman atas operasional bank syariah, jumlah jaringan bank syariah dan keahlian sumber daya manusia dibidang bank syariah. Perkembangan perbankan syariah yang baik tergantung dari kemampuan memberikan produk dan jasa yang baik kepada nasabah. Satu ukuran tentang pemberian produk dan jasa yang baik

Homme esilinastuv uus Eesti film "Kuldrannake" flirdib terrorismiteemaga / Andris Feldmanis

Index Scriptorium Estoniae

Feldmanis, Andris, 1982-

2006-01-01

Jüri Sillarti mängufilm "Kuldrannake". Kunagise retrobändi kokkutulekut kujutava filmi stsenarist on Hans Luik oma näidendi "Tõe hetk" põhjal, operaator on Mait Mäekivi, produtsendid Kristian Taska ja Hans H. Luik, tootjafirmaks Taska Productions

Ne speshite jego horonit / Stanislav F. Rostotski

Index Scriptorium Estoniae

Rostotski, Stanislav F.

2000-01-01

Bondi-filmide minevikust ja oletatavast tulevikust seoses uue Bondi-filmiga "007 ja liiga kitsas maailm" ("The World Is Not Enough") : režissöör Michael Apted : Peaosas Pierce Brosnan : Suurbritannia - Ameerika Ühendriigid 1999

Caterina Murino : "Bond, kas sulle meeldivad abielunaised?" / Caterina Murino ; interv. Viktoria Ladõnskaja

Index Scriptorium Estoniae

Murino, Caterina

2006-01-01

Ajakirjanikud vaatasid Londonis uut Bondi-filmi "007: Casino Royale" ja kohtusid pressikonverentsil peaosatäitjatega. Itaalia näitleja Caterina Murino räägib oma rollist ja koostööst Bondi-kehastaja Daniel Craigiga

Daniel Kreig : ja budu sovsem drugim Dzheimsom Bondom / Daniel Craig ; interv. Mihhail Ozerov

Index Scriptorium Estoniae

Craig, Daniel

2006-01-01

Briti näitleja Daniel Craig on valitud kuuendaks James Bondi osatäitjaks. Ian Flemingi "Casino Royale" taasekraniseeringu režissöör on Martin Campbell. Lisaks lühike ülevaade Bondi kehastanud näitlejatest

Kes joonistab uue kunstilaine kaardi? / Katrin Kivimaa

Index Scriptorium Estoniae

Kivimaa, Katrin, 1969-

2008-01-01

Anders Härmi ja Hanno Soansi kureeritud näitusest "Uus laine. 21. sajandi eesti kunstnikud" Tallinna Kunstihoones ja Kunstihoone galeriis ning Non Grata kollektiivnäitusest "Uus laine. 20. sajandi kunst" Kultuuritehases Polymer

Kes joonistab uue kunstilaine kaardi? / Katrin Kivimaa

Index Scriptorium Estoniae

Kivimaa, Katrin, 1969-

2007-01-01

Eesti noorema kunsti näitus "Uus laine. 21. sajandi eesti kunstnikud" (kuraatorid Anders Härm, Hanno Soans) Tallinna Kunstihoones ja Kunstihoone galeriis. Non Grata kollektiivnäitus "Uus laine. 20. sajandi kunst" Kultuuritehases Polymer

Bond-girl Eva Green: "Daniel ei ole sugugi halb" / Eva Green ; ref. Viktoria Ladõnskaja

Index Scriptorium Estoniae

Green, Eva

2006-01-01

Ajakirjanikud vaatasid Londonis uut Bondi-filmi "007 : Casino Royale" ja kohtusid pressikonverentsil peaosatäitjatega. Prantsusmaal elav rootsi-alžeeria päritolu näitlejanna Eva Green räägib oma rollist ja koostööst Bondi-kehastaja Daniel Craigiga

Uus video, uus Euroopa / Kiwa

Index Scriptorium Estoniae

Kiwa, pseud., 1975-

2006-01-01

New Yorgi kunstikeskuses The Kitchen avatud endiste idablokimaade videokunstnike tööde näitusest. Eestlastest eksponeeritud Kiwa, Ene-Liis Semperi, Killu Sukmiti, Mari Laanemetsa, Tiia Johannsoni ja Kai Kaljo tööd. Kuraator Hamza Walker

Skandaalne visioon : Portugal kaob / Allan Espenberg

Index Scriptorium Estoniae

Espenberg, Allan

2007-01-01

Välismaal elav Portugali kirjanik Jose Saramago tegi ettepaneku, mille kohaselt muudetaks Portugali riik üheks Hispaania provintsiks, tekkinud uus riik võiks aga kanda Iberia nime. Kaart: Uus Euroopa riik? Lisa: Õpetab ka teisi riike

Consistent van der Waals radii for the whole main group.

Science.gov (United States)

Mantina, Manjeera; Chamberlin, Adam C; Valero, Rosendo; Cramer, Christopher J; Truhlar, Donald G

2009-05-14

Atomic radii are not precisely defined but are nevertheless widely used parameters in modeling and understanding molecular structure and interactions. The van der Waals radii determined by Bondi from molecular crystals and data for gases are the most widely used values, but Bondi recommended radius values for only 28 of the 44 main-group elements in the periodic table. In the present Article, we present atomic radii for the other 16; these new radii were determined in a way designed to be compatible with Bondi's scale. The method chosen is a set of two-parameter correlations of Bondi's radii with repulsive-wall distances calculated by relativistic coupled-cluster electronic structure calculations. The newly determined radii (in A) are Be, 1.53; B, 1.92; Al, 1.84; Ca, 2.31; Ge, 2.11; Rb, 3.03; Sr, 2.49; Sb, 2.06; Cs, 3.43; Ba, 2.68; Bi, 2.07; Po, 1.97; At, 2.02; Rn, 2.20; Fr, 3.48; and Ra, 2.83.

Tuluke julgustab õpetajaid koos muresid murdma / Sirje Pärismaa

Index Scriptorium Estoniae

Pärismaa, Sirje, 1958-

2014-01-01

Kuidas Norrast pärit koolikultuuri parandava LP-mudeli (learning environment and pedagogical analysis) kasutuselevõtt toimib, sellest räägivad Annelinna gümnaasiumi õpetajad. Projektist „Tõenduspõhine uus lähenemine - uus koolikultuur Eestis (TULUKE)”

Mustamäe haigla juurdeehitus läheb maksma 400 miljonit krooni / Aleksei Günter

Index Scriptorium Estoniae

Günter, Aleksei, 1979-

2005-01-01

Põhja-Eesti Regionaalhaigla koondab kõik oma raviteenused Mustamäe haiglasse ja ehitab selleks praeguse kompleksi juurde lisakorpuse. Uus korpus läheb maksma ligi 400 miljoni krooni, millest 170 miljonit saadakse Euroopa Liidu struktuurifondidest. Lisa: Uus korpus. Skeem

Effectiveness of Combining Tangible Symbols with the Picture Exchange Communication System to Teach Requesting Skills to Children with Multiple Disabilities Including Visual Impairment

Science.gov (United States)

Ali, Emad; MacFarland, Stephanie Z.; Umbreit, John

2011-01-01

The Picture Exchange Communication System (PECS) is an augmentative and alternative communication (AAC) program used to teach functional requesting and commenting skills to people with disabilities (Bondy & Frost, 1993; Frost & Bondy, 2002). In this study, tangible symbols were added to PECS in teaching requesting to four students (ages 7-14) with…

Vaatab ja näeb teistmoodi / Aavo Kokk

Index Scriptorium Estoniae

Kokk, Aavo, 1964-

2002-01-01

Kui varem oli strateegilise planeerimise alus ettevõtetes see, kuidas tulevikku paremini ette näha, siis nüüd arutavad ettevõtted selle üle, kuidas tekitada uus turg ja uus nõudlus. Lennukifirmade Airbus ja Boeing erinev ettekujutus lennunduse arengust

Muusikauudiseid maailmast / Nele-Eva Steinfeld

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2015-01-01

Lühisõnumeid maailmast: Paavo Järvile kolm suurt muusikapreemiat. Gramophone'i muusikapreemiate laureaadid. ECHO Klassiku laureaadid 2015. Uudised Leedsi pianistide konkursilt. Riccardo Chailly Luzerni festivali orkestri uus muusikajuht. Andris Nelsons Leipzigi Gewandhaus-orkestri uus peadirigent. Iraan ja Iisrael seisavad vastu Barenboimi kontserdile Teheranis

Oskusest konflikti sekkuda on töös tuge / Sirje Pärismaa ; kommenteerinud Airiin Demir

Index Scriptorium Estoniae

Pärismaa, Sirje, 1958-

2016-01-01

Projekti „Tõenduspõhine uus lähenemine - uus koolikultuur Eestis (TULUKE)“ üheks alategevuseks on pädevuste arendamine tõenduspõhiste sekkumisprogrammide kasutuselevõtuks. Maarjamaa hariduskolleegiumi Emajõe õppekeskuse (endine Kaagvere erikool) töötajad on õppinud maailmas tunnustatud sekkumisprogrammide nippe

Kodu Rotterdami kaubasadamas / Ada Org

Index Scriptorium Estoniae

Org, Ada

2005-01-01

Vabakutselise kunstniku Sandy omapärasest kolmekorruselisest tellistest elamust aadressil kai number 2600. Enamus mööblist on korduvkasutuses, asjadele on leitud uus funktsioon, remonditööd on teinud Sandy ise. Kolmandal korrusel asuva vannitoa sisustus on uus. 13 värv. ill

"Brief Report: Increase in Production of Spoken Words in Some Children with Autism after PECS Teaching to Phase III"

Science.gov (United States)

Carr, Deborah; Felce, Janet

2007-01-01

The context for this work was an evaluation study [Carr, D., & Felce, J. A. (in press)] of the early phases of the Picture Exchange Communication System (PECS) [Frost, L. A., & Bondy, A. S. (1994). "The picture exchange communication system training manual." Cherry Hill, NJ: Pyramid Educational Consultants, Inc.; Frost, L. A., & Bondy, A. S.…

Approximate radiative solutions of the Einstein equations

International Nuclear Information System (INIS)

Kuusk, P.; Unt, V.

1976-01-01

In this paper the external field of a bounded source emitting gravitational radiation is considered. A successive approximation method is used to integrate the Einstein equations in Bondi's coordinates (Bondi et al, Proc. R. Soc.; A269:21 (1962)). A method of separation of angular variables is worked out and the approximate Einstein equations are reduced to key equations. The losses of mass, momentum, and angular momentum due to gravitational multipole radiation are found. It is demonstrated that in the case of proper treatment a real mass occurs instead of a mass aspect in a solution of the Einstein equations. In an appendix Bondi's new function is given in terms of sources. (author)

Black Films and Film-Makers.

Science.gov (United States)

Patterson, Lindsay, Ed.

The development of black films and the attitudes of the film industry toward black films and black actors are some of the topics examined in this anthology of essays. Section 1, "Nigger to Supernigger," contains such articles as "The Death of Rastus: Negroes in American Films" by Thomas R. Cripps and "Folk Values in a New Medium" by Alain Locke…

Uus aeg, uus tehing / Kristjan Otsmann

Index Scriptorium Estoniae

Otsmann, Kristjan, 1971-

2009-01-01

Autor tutvustab ärikirjaniku Seth Godini soovitusi majanduslanguse edukaks üleelamiseks: muuta end asendamatuks, usaldusväärseks ning oma ala asjatundjaks, kasulikum on olla väike kui suur ettevõtja ning eesmärgid tuleb siduda konkreetsete tegevustega

Asjade seis, viimane vaatus... / Anders Härm, Hanno Soans

Index Scriptorium Estoniae

Härm, Anders, 1977-

2008-01-01

Muutustest ühiskonnas ja vastuoludest kunstielus pärast kolme üheaegselt toimunud noortenäitust - Härmi-Soansi kureeritud "Uus laine. 21. sajandi Eesti kunstnikud", Non Grata "Uus laine. 21. sajandi kunst" ja Andres Lõo kureeritud "Pomo Sapiens"i, ka näituse kuraatorikontseptsioonidest, Non Grata juhtfiguuridest ja kriitikast

Tshto novogo?

Index Scriptorium Estoniae

2003-01-01

Moeteemalisi uudiseid Eestist: eesti olümpialaste riietus, autoriks Jaana Varkki (Monton); moetööstuse auhind "Suur Kuldnõel 2003" sai Merike Päärole; Kanal 2 moesaade "Glamorama"; avati Ivo Nikkolo moekauplus; Sangari uus kollektsioon uue disaineriga; Klementi uus logo; reklaamikonkursi Cresta Awards finaalis Montoni veebisait www.montonfashion.com

Kunstikonteiner on avatud kõigile headele ideedele / Tanel Saar, Sandra Jõgeva ; interv. R[eet] V[arblane

Index Scriptorium Estoniae

Saar, Tanel

2007-01-01

Polymeri kultuuritehases Tallinnas (Ülase 16 / Madara 22) tegutsevast Academia Non Grata filiaalist ja alternatiivgaleriist Nongrata Kunstikonteiner. Näitustest, tulevikuplaanidest. Avanäituseks oli "Uus laine. 21. sajandi kunst", juuni lõpuni on avatud rahvusvahelise performance'ifestivali "Diverse Universe III" avanäitus "Aderlassenplatz" ja "Uus laine. II valik: tegevuskunst"

Film quality in film mammography. Pt. 2

International Nuclear Information System (INIS)

Friedrich, M.; Weskamp, P.; Freie Univ. Berlin

1976-01-01

During consideration of three film mammographic systems, the concept of signal/noise ratio is developed as a quantitative measure of film quality. The ability to recognise detail related to detail size, film blackening and exposure geometry was studied for various systems, and the quality profiles are discussed. There is a considerable difference in quality between industrial films without screens and film-screen combinations; however, exposure geometry during mammography has a considerable effect which tends to reduce the difference. Consequently, detail sizes of 200 μ to 1,000 μ (including the majority of mammographic micro-calcifications) are shown about equally well. Contrast for the lo-dose system is somewhat less than for adequately exposed industrial film. Over-exposure with the lo-dose system, contrary to industrial film, rapidly leads to unsatisfactory results. On the other hand it is often not possible to obtain an adequate exposure when using industrial film. For these reasons it is often an advantage to examine large breasts and the dense breasts of young women with a film-screen combination which requires approximately one eighth of the dose necessary for industrial film. For small or easily compressable breasts best results are obtained, using an adequate exposure by employing industril film; radiation dose it then acceptable. (orig./ORU) [de

Keila-Joa loss presidendi uueks residentsiks?

Index Scriptorium Estoniae

2007-01-01

Riigi Kinnisvara AS võttis presidendi kantselei palvel müügist maha Keila-Joa lossikompleksi. Lossist võib tulevikus kujuneda riigipea residents. Ilmunud ka: Eesti Elu 15. juuni 2007, lk. 17, pealk.: Keila-Joale presidendi uus residents?; Eesti Hääl 10. aug. 2007, lk. 1, pealk.: Keila-Joale tuleb presidendi uus residents

Origins of chirality in Nature: a reassessment of the postulated role of bentonite

International Nuclear Information System (INIS)

Youatt, J.B.; Brown, R.D.

1981-01-01

Bondy and Harrington have proposed that selective binding of L isomers of amino acids and D isomers of sugars to bentonite is the mechanism by which the chirality of molecules in living cells was originally established. Further experiments indicate that the observations of Bondy and Harrington are better explained in terms of the effects of the binding to bentonite of the products of radiochemical decomposition. 1 table

Influence of film dimensions on film droplet formation.

Science.gov (United States)

Holmgren, Helene; Ljungström, Evert

2012-02-01

Aerosol particles may be generated from rupturing liquid films through a droplet formation mechanism. The present work was undertaken with the aim to throw some light on the influence of film dimensions on droplet formation with possible consequences for exhaled breath aerosol formation. The film droplet formation process was mimicked by using a purpose-built device, where fluid films were spanned across holes of known diameters. As the films burst, droplets were formed and the number and size distributions of the resulting droplets were determined. No general relation could be found between hole diameter and the number of droplets generated per unit surface area of fluid film. Averaged over all film sizes, a higher surface tension yielded higher concentrations of droplets. Surface tension did not influence the resulting droplet diameter, but it was found that smaller films generated smaller droplets. This study shows that small fluid films generate droplets as efficiently as large films, and that droplets may well be generated from films with diameters below 1 mm. This has implications for the formation of film droplets from reopening of closed airways because human terminal bronchioles are of similar dimensions. Thus, the results provide support for the earlier proposed mechanism where reopening of closed airways is one origin of exhaled particles.

Belgia restoran Londonis

Index Scriptorium Estoniae

1999-01-01

Belgia ehk Belgo restoraniketi uus restoran Notting Hill Gate'i linnajaos Londonis endise tantsuteatri ruumides. Ümberehituse arhitektid ئ iraanlane Farshid Moussavi, hispaanlane Alejandro Zaera-Polo. Belgia köögi kolm märksõna: teod, friikartulid, õlu. Need kujutised on ka maja fassaadil, teokarbi kujust lähtub restorani uus interjöör

Eesti kunst ristlainetuses / Ave Randviir

Index Scriptorium Estoniae

Randviir, Ave, 1981-

2007-01-01

Noorte kunstnike näitused "Uus laine. 21. sajandi eesti kunstnikud" Tallinna Kunstihoones (28.04.-28.05.2007) ja selle galeriis (28.04.-20.05.2007), "POMO SAPIENS : see on tõesti midagi" Vaal galeriis (2.05.-19.05.2007) ja "Uus laine. 21 sajandi Eesti kunst" Kultuuritehase Polymer III korruse alternatiivgaleriis Nongrata Kunstikonteineris (alates 11.05.2007) Tallinnas

Equilibrium helium film in the thick film limit

International Nuclear Information System (INIS)

Klier, J.; Schletterer, F.; Leiderer, P.; Shikin, V.

2003-01-01

For the thickness of a liquid or solid quantum film, like liquid helium or solid hydrogen, there exist still open questions about how the film thickness develops in certain limits. One of these is the thick film limit, i.e., the crossover from the thick film to bulk. We have performed measurements in this range using the surface plasmon resonance technique and an evaporated Ag film deposited on glass as substrate. The thickness of the adsorbed helium film is varied by changing the distance h of the bulk reservoir to the surface of the substrate. In the limiting case, when h > 0, the film thickness approaches about 100 nm following the van der Waals law in the retarded regime. The film thickness and its dependence on h is precisely determined and theoretically modeled. The equilibrium film thickness behaviour is discussed in detail. The agreement between theory and experiment is very good

Film beyond boundaries: film, migrant narratives and other media Film beyond boundaries: film, migrant narratives and other media

OpenAIRE

Anelise Reich Corseuil

2008-01-01

The articles here presented are representative of the debates about the various transformational aspects of film studies, fostering the discussion about the transformations and interactions between national and international narrative forms, the interrelations between film and literature, and film with other media. The critical perspectives here presented range from an emphasis on cultural materialism, dialogism, reception theory, deconstructionism, narrative studies to film aesthetics or fil...

Accelerating Photons with Gravitational Radiation

CERN Document Server

Shore, Graham M

2001-01-01

The nature of superluminal photon propagation in the gravitational field describing radiation from a time-dependent, isolated source (the Bondi-Sachs metric) is considered in an effective theory which includes interactions which violate the strong equivalence principle. Such interactions are, for example, generated by vacuum polarisation in conventional QED in curved spacetime. The relation of the resulting light-cone modifications to the Peeling Theorem for the Bondi-Sachs spacetime is explained.

Arhitektuuriuudised / Karen Jagodin

Index Scriptorium Estoniae

Jagodin, Karen, 1982-

2006-01-01

Tate Moderni juurdeehitus Londonis, arhitektid Jacques Herzog ja Pierre de Meuron. Šveitsi arhitektuuribüroos Geninasca Delefortrie projekteeritud eramu. Konkursist Vockerode elektrijaama rekonstrueerimiseks Saksamaal. Portugali arhitekti Alvaro Leite Siza Viera projekteeritud eramu. VIP paviljon Valencias 2007. aasta purjeregatiks, arhitekt David Chipperfild. Berliini uus raudteejaama peahoone. Madridi lennujaama Barajas uus terminal, büroo Richard Rogers Partnership, võitis RIBA Stirling Prize'i

Uus juht, uus olukord, uued nõuded

Index Scriptorium Estoniae

2005-01-01

Nõuandeid juhiks edutatule, kuidas rolli, alluvate ning ülesannete delegeerimisega edukalt toime tulla. Nõuanded pärinevad Loren B. Belkeri raamatust "Noorele juhile" ning ajakirja Harvard Management Update 2004. aasta juulikuu numbris avaldatud artiklist "Are YOU delegating so it sticks?"

Stunted accretion growth of black holes by combined effect of the flow angular momentum and radiation feedback

Science.gov (United States)

Sugimura, Kazuyuki; Hosokawa, Takashi; Yajima, Hidenobu; Inayoshi, Kohei; Omukai, Kazuyuki

2018-05-01

Accretion on to seed black holes (BHs) is believed to play a crucial role in formation of supermassive BHs observed at high-redshift (z > 6). Here, we investigate the combined effect of gas angular momentum and radiation feedback on the accretion flow, by performing 2D axially symmetric radiation hydrodynamics simulations that solve the flow structure across the Bondi radius and the outer part of the accretion disc simultaneously. The accreting gas with finite angular momentum forms a rotationally-supported disc inside the Bondi radius, where the accretion proceeds by the angular momentum transport due to assumed α-type viscosity. We find that the interplay of radiation and angular momentum significantly suppresses accretion even if the radiative feedback is weakened in an equatorial shadowing region. The accretion rate is O(α) ˜ O(0.01 - 0.1) times the Bondi value, where α is the viscosity parameter. By developing an analytical model, we show that such a great reduction of the accretion rate persists unless the angular momentum is so small that the corresponding centrifugal radius is ≲ 0.04 times the Bondi radius. We argue that BHs are hard to grow quickly via rapid mass accretion considering the angular momentum barrier presented in this paper.

Film Reviews.

Science.gov (United States)

Lance, Larry M.; Atwater, Lynn

1987-01-01

Reviews four Human Sexuality films and videos. These are: "Personal Decisions" (Planned Parenthood Federation of America, 1985); "The Touch Film" (Sterling Production, 1986); "Rethinking Rape" (Film Distribution Center, 1985); "Not A Love Story" (National Film Board of Canada, 1981). (AEM)

The Evolution of Film: Rethinking Film Studies

OpenAIRE

Harbord, Janet P.

2007-01-01

How is film changing? What does it do, and what do we do with it? This book examines the reasons why we should be studying film in the twenty-first century, connecting debates from philosophy, anthropology and new media with historical concerns of film studies.

Single-layer nano-carbon film, diamond film, and diamond/nano-carbon composite film field emission performance comparison

International Nuclear Information System (INIS)

Wang, Xiaoping; Wang, Jinye; Wang, Lijun

2016-01-01

A series of single-layer nano-carbon (SNC) films, diamond films, and diamond/nano-carbon (D/NC) composite films have been prepared on the highly doped silicon substrate by using microwave plasma chemical vapor deposition techniques. The films were characterised by scanning electron microscopy, Raman spectroscopy, and field emission I-V measurements. The experimental results indicated that the field emission maximum current density of D/NC composite films is 11.8–17.8 times that of diamond films. And the field emission current density of D/NC composite films is 2.9–5 times that of SNC films at an electric field of 3.0 V/μm. At the same time, the D/NC composite film exhibits the advantage of improved reproducibility and long term stability (both of the nano-carbon film within the D/NC composite cathode and the SNC cathode were prepared under the same experimental conditions). And for the D/NC composite sample, a high current density of 10 mA/cm"2 at an electric field of 3.0 V/μm was obtained. Diamond layer can effectively improve the field emission characteristics of nano-carbon film. The reason may be due to the diamond film acts as the electron acceleration layer.

Process and apparatus for irradiating film, and irradiated film

International Nuclear Information System (INIS)

1981-01-01

A process for irradiating film is described, which consists of passing the film through an electron irradiation zone having an electron reflection surface disposed behind and generally parallel to the film; and disposing within the irradiation zone adjacent the edges of the film a lateral reflection member for reflecting the electrons toward the reflection surface to further reflect the reflected electrons towards the adjacent edges of the film. (author)

Läti hea teatri mitu nägu / Rait Avestik

Index Scriptorium Estoniae

Avestik, Rait

2007-01-01

Läti teatri eelmise hooaja parimate uuslavastuste ülevaatefestivalist "Spelmanu Nakts 2006" ("Mängurite Ööd"). Etendustest: Albert Camus "Caligula" - lavastaja Dzh. Dzh. Dzhilindzhers (Dailes Teater), David Harrower "Noad kanade sees" - lavastaja Gatis Shmits (Dailes Teater), Umka.Iv ja Betontanc "Näita oma nägu" - lavastaja Matjazh Pograjc, Jorge Luis Borges "Hellus" - lavastaja Elina Cerpa (Riia Uus Teater), Vladimir Sorokin "Jää" - lavastaja Alvis Hermanis (Riia Uus Teater)

Hermann Bondi (1919–2005)

Indian Academy of Sciences (India)

IAS Admin

of gravitational waves. Pirani is credited with focusing attention on the observable motions of freely falling particles in the field of such waves, described elsewhere in this issue – basically a pair of particles changes its separation as measured by light beams (as in LIGO) or with respect to a ruler. The famous 'sticky bead' ...

Muusikamaailm : Schleswig-Holsteini festival 2001. Peter Sellars lavastab Bachi kantaate. Taas uus Soome ooper. Henze festival Londonis. Uus film Maria Callasest / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

2001-01-01

Schleswig-Holsteini suvisest muusikafestivalist 7.VII-2.IX 2001. a. New Yorgis tuli esiettekandele P. Sellarsi lavastatud etendus Bachi kantaatidest. Uue muusika festivalil "Musica Nova" Helsingis tuli esiettekandele T. Länsiö ooper "Sulka". H. W. Henze 75. juubelit tähistatakse Londonis festivaliga "Voices". F.Zeffirelli lavastab filmi M. Callasest

Film and History.

Science.gov (United States)

Schaber, Robin L.

2002-01-01

Provides an annotated bibliography of Web sites that focus on using film to teach history. Includes Web sites in five areas: (1) film and education; (2) history of cinema; (3) film and history resources; (4) film and women; and (5) film organizations. (CMK)

Tests with films and film-screens using grid-mammography

International Nuclear Information System (INIS)

Wolf, G.; Kallinger, G.

1982-01-01

A comparison was made between mammography using grid-technique with a film-screen-system and mammography without grid, and with film-screens and also using industrial films. The image-quality of grid mammography looks like the same than using conventional techniques and industrial films. The problem of soft tissue grid techniques lies in the dose requirements, which was more than using film-screen-techniques without grid. New and improved recording systems, which reduce radiation dose when using the grid technique were analyzed. (orig.) [de

Contemporary Films' Mini Course on Film Study.

Science.gov (United States)

Schillaci, Peter

This minicourse on film study can be a unit in English, in arts, or in the humanities. It can help to launch a film study course or complement an introduction to theater. Whatever form it takes, it helps to build a bridge to the student's media environment. Part one, the language of images, utilizes four films which demonstrate the basic elements…

A new perspective on steady-state cosmology: from Einstein to Hoyle

OpenAIRE

O'Raifeartaigh, Cormac; Mitton, Simon

2015-01-01

We recently reported the discovery of an unpublished manuscript by Albert Einstein in which he attempted a 'steady-state' model of the universe, i.e., a cosmic model in which the expanding universe remains essentially unchanged due to a continuous formation of matter from empty space. The manuscript was apparently written in early 1931, many years before the steady-state models of Fred Hoyle, Hermann Bondi and Thomas Gold. We compare Einstein’s steady-state cosmology with that of Hoyle, Bondi...

Polyether ether ketone film. Polyether ether ketone film

Energy Technology Data Exchange (ETDEWEB)

Suzuki, S. (Sumitomo Chemical Co. Ltd., Tokyo (Japan))

1990-07-05

The characteristics and the film making process of polyether ether ketone (PEEK) resin, and the characteristics and the applications of PEEK film, are described. PEEK is aromatic polyketone with super thermal resistance. Though it is a crystalline polymer of which the crystallinity is controlled to 48% in a highest degree, it has also amorphous property, thus it shows unique property. The characteristics of PEEK resin are found in thermal resistance, incombusti-bility, transparency, chemical resistance, light resistance and radiation resistance. As for the film making process, casting method by T-die is generally adopted. The general properties of PEEK film are excellent in high thermal resistance, good electrical properties, chemical resistance, hydrolysis resistance, radiation resistance and imcombusti-bility. In the application of PEEK film, new development is expected in following fields; a high performance composite, flexible print substrate with high thermal resistance, insulating tape with thermal resistance, and a general film in the nuclear energy industry. 5 figs., 5 tabs.

Film “Darah dan Do’a” Sebagai Wacana Film Nasional Indonesia

Directory of Open Access Journals (Sweden)

Arda - Muhlisiun

2016-09-01

Abstract A national filmsuggestived towards the ideasof nationalidentity. It can be labelled ‘national’ because the representation of national identity pertains to it. Usmar Ismail’s film was described as a national film because it presents genuine Indonesian. Through the textual analysis that discursive-performative understanding of national films can be achieved; an understanding that has become a myth in context to Usmar Ismail’s film.In order to clarified concepts of national film as well as to illustrate the discourse of national films in Usmar Ismail’s work, this analysis used JinHee Choi’s theory of national cinema. In which national film was theorized based on territorial, functional and relational factors. The findings of this analysis showed how the concept of national film in Usmar Ismail’s film actually struggles against the dominant discourse of its time particularly in terms of Usmar Ismail’s figure as a determining factor in establishing national films in Indonesia.   Keyword : National Cinema, Usmar Ismail, Darah dan Doa

American Film Genres: Approaches to a Critical Theory of Popular Film.

Science.gov (United States)

Kaminsky, Stuart M.

This book is divided into twelve sections and contains photographs from many of the films discussed. The introduction defines film genre and describes the general theories behind this book; "The Individual Film" analyzes the film "Little Caesar" as it relates to the genre of gangster films; "Comparative Forms"…

Film beyond boundaries: film, migrant narratives and other media

OpenAIRE

Anelise Reich Corseuil

2006-01-01

The articles here presented are representative of the debates about the various transformational aspects of film studies, fostering the discussion about the transformations and interactions between national and international narrative forms, the interrelations between film and literature, and film with other media. The critical perspectives here presented range from an emphasis on cultural materialism, dialogism, reception theory, deconstructionism, narrative studies to film aesthetics or fil...

Film: An Introduction.

Science.gov (United States)

Fell, John L.

"Understanding Film," the opening section of this book, discusses perceptions of and responses to film and the way in which experiences with and knowledge of other media affect film viewing. The second section, "Film Elements," analyzes the basic elements of film: the use of space and time, the impact of editing, sound and color, and the effects…

Numerical relativity and asymptotic flatness

International Nuclear Information System (INIS)

Deadman, E; Stewart, J M

2009-01-01

It is highly plausible that the region of spacetime far from an isolated gravitating body is, in some sense, asymptotically Minkowskian. However theoretical studies of the full nonlinear theory, initiated by Bondi et al (1962 Proc. R. Soc. A 269 21-51), Sachs (1962 Proc. R. Soc. A 270 103-26) and Newman and Unti (1962 J. Math. Phys. 3 891-901), rely on careful, clever, a priori choices of a chart (and tetrad) and so are not readily accessible to the numerical relativist, who chooses her/his chart on the basis of quite different grounds. This paper seeks to close this gap. Starting from data available in a typical numerical evolution, we construct a chart and tetrad which are, asymptotically, sufficiently close to the theoretical ones, so that the key concepts of the Bondi news function, Bondi mass and its rate of decrease can be estimated. In particular, these estimates can be expressed in the numerical relativist's chart as numerical relativity recipes.

DISCOVERY OF A FLAT-SPECTRUM RADIO NUCLEUS IN NGC 3115

Energy Technology Data Exchange (ETDEWEB)

Wrobel, J. M. [National Radio Astronomy Observatory, P.O. Box O, Socorro, NM 87801 (United States); Nyland, K., E-mail: jwrobel@nrao.edu, E-mail: knyland@nrao.edu [New Mexico Tech, Department of Physics, 801 Leroy Place, Socorro, NM 87801 (United States)

2012-12-01

The early-type galaxy NGC 3115, at a distance of 10.2 Mpc, hosts the nearest billion-solar-mass black hole. Wong et al. recently inferred a substantial Bondi accretion rate near the black hole. Bondi-like accretion is thought to fuel outflows, which can be traced through their radio emission. This paper reports the discovery of a radio nucleus in NGC 3115, with a diameter less than 0.''17 (8.4 pc), a luminosity at 8.5 GHz of 3.1 Multiplication-Sign 10{sup 35} erg s{sup -1}, and a flat spectrum ({alpha} = -0.23 {+-} 0.20, S{proportional_to}{nu}{sup {alpha}}). The radio source coincides with the galaxy's photocenter and candidate X-ray nucleus. The emission is radio loud, suggesting the presence of an outflow on scales less than 10 pc. On such scales, the Bondi accretion could be impeded by heating due to disruption of the outflow.

Screen-film mammography

International Nuclear Information System (INIS)

Logan, W.W.; Janus, J.A.

1987-01-01

The development of screen-film mammography has resulted in the re-emergence of confidence, rather than fear, in mammography. When screen-film mammography is performed with state-of-the-art dedicated equipment utilizing vigorous breast compression and a ''soft'' x-ray beam for improved contrast, screen-film images are equivalent or superior to those of reduced-dose xeromammography and superior to those of nonscreen film mammography. Technological aids for conversion from xeromammographic or nonscreen film mammographic techniques to screen-film techniques have been described. Screen-film mammography should not be attempted until dedicated equipment has been obtained and the importance of vigorous compression has been understood

Thin films

International Nuclear Information System (INIS)

Strongin, M.; Miller, D.L.

1976-01-01

This article reviews the phenomena that occur in films from the point of view of a solid state physicist. Films form the basis for many established and developing technologies. Metal layers have always been important for optical coatings and as protective coatings. In the most sophisticated cases, films and their interaction on silicon surfaces form the basis of modern electronic technology. Films of silicon, GaAs and composites of these materials promise to lead to practical photovoltaic devices

Film som kunst

DEFF Research Database (Denmark)

Petersen, Anne Ring

2013-01-01

Films by artists induce scholars to work across art, film and cultural history. Accordingly, this article adopts an interdisciplinary approach to the British-Nigerian artist Yinka Shonibare’s film Un Ballo in Maschera (2004). The film is grounded in Shonibare’s unique use of African-print fabric...... in conjunction with references to European cultural and political history, but the film is also – it is alleged – rooted in Black British cinema and the transnational postcolonialism which emerged in the UK of the 1980s. The article starts with a general introduction to Shonibare’s art and the colonial...... connotations of the African-print fabric, which are also central to the critique of power in Un Ballo in Maschera. Its critical agenda is then analysed and put into historical perspective by relating the film to Black British film. A comparison with the Black Audio Film Collective’s key work Handsworth Songs...

Mammographic microcalcifications: Detection with xerography, screen-film, and digitized film display

International Nuclear Information System (INIS)

Smathers, R.L.; Bush, E.; Drace, J.; Stevens, M.; Sommer, F.G.; Brown, B.W.; Karras, B.

1986-01-01

Pulverized bone specks and aluminum oxide specks were measured by hand into sizes ranging from 0.2 mm to 1.0 mm and then arranged in clusters. These clusters were superimposed on a human breast tissue phantom, and xeromammograms and screen-film mammograms of the clusters were made. The screen-film mammograms were digitized using a high-resolution laser scanner and then displayed on cathode ray tube (CRT) monitors. Six radiologists independently counted the microcalcifications on the xeromammograms, the screen-film mammograms, and the digitized film mammograms. The xeromammograms were examined with a magnifying glass; the screen-film images were examined with a magnifying glass and by hot light; and the digitized-film images were examined by electronic magnification and image processing. The bone speck size that corresponded to a mean 50% detectability level for each technique was as follows: xeromammography, 0.550 mm; digitized film, 0.573 mm; and screen-film, 0.661 mm. We postulate that electronic magnification and image processing with edge enhancement can improve the capability of screen-film mammography to enhance the detection of microcalcifications

Filming eugenics: teaching the history of eugenics through film.

Science.gov (United States)

Ooten, Melissa; Trembanis, Sarah

2007-01-01

In teaching eugenics to undergraduate students and general public audiences, film should he considered as a provocative and fruitful medium that can generate important discussions about the intersections among eugenics, gender, class, race, and sexuality. This paper considers the use of two films, A Bill of Divorcement and The Lynchburg Story, as pedagogical tools for the history of eugenics. The authors provide background information on the films and suggestions for using the films to foster an active engagement with the historical eugenics movement.

Nuclear films

International Nuclear Information System (INIS)

Malone, Peter.

1985-01-01

This booklet is a resource for the study of feature films that highlight the theme of nuclear war. It provides basic credits and brief indication of the theme, treatment, quality and particular notable aspects; and a series of questions raised by the film. Seventy feature films and thirty documentaries are examined

Film processing

International Nuclear Information System (INIS)

Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

2008-01-01

The processing was made not only to show what are in the film but also to produce radiograph with high quality where the information gathered really presented level of the quality of the object inspected. Besides that, good procedure will make the film with good quality can keep the film in long time for reference. Here, more detailed on how the dark room functioned and its design. So, the good procedure while processed the film will be discussed detailed in this chapter from entering the dark room to exit from there.

Automatic film loader for X-ray spot film device

International Nuclear Information System (INIS)

1975-01-01

A light tight tunnel extends over the top of a diagnostic X-ray table. A film cassette is mounted for reciprocating in the tunnel between an X-ray exposure position and a position in which the cassette is unloaded or loaded with film automatically. Unexposed films are dispensed one at a time into the cassette from a feed magazine at one end of the tunnel. After exposure, the film is ejected from the cassette into a receiving magazine at the same end of the tunnel. (Auth.)

Water-evaporation reduction by duplex films: application to the human tear film.

Science.gov (United States)

Cerretani, Colin F; Ho, Nghia H; Radke, C J

2013-09-01

Water-evaporation reduction by duplex-oil films is especially important to understand the physiology of the human tear film. Secreted lipids, called meibum, form a duplex film that coats the aqueous tear film and purportedly reduces tear evaporation. Lipid-layer deficiency is correlated with the occurrence of dry-eye disease; however, in-vitro experiments fail to show water-evaporation reduction by tear-lipid duplex films. We review the available literature on water-evaporation reduction by duplex-oil films and outline the theoretical underpinnings of spreading and evaporation kinetics that govern behavior of these systems. A dissolution-diffusion model unifies the data reported in the literature and identifies dewetting of duplex films into lenses as a key challenge to obtaining significant evaporation reduction. We develop an improved apparatus for measuring evaporation reduction by duplex-oil films including simultaneous assessment of film coverage, stability, and temperature, all under controlled external mass transfer. New data reported in this study fit into the larger body of work conducted on water-evaporation reduction by duplex-oil films. Duplex-oil films of oxidized mineral oil/mucin (MOx/BSM), human meibum (HM), and bovine meibum (BM) reduce water evaporation by a dissolution-diffusion mechanism, as confirmed by agreement between measurement and theory. The water permeability of oxidized-mineral-oil duplex films agrees with those reported in the literature, after correction for the presence of mucin. We find that duplex-oil films of bovine and human meibum at physiologic temperature reduce water evaporation only 6-8% for a 100-nm film thickness pertinent to the human tear film. Comparison to in-vivo human tear-evaporation measurements is inconclusive because evaporation from a clean-water surface is not measured and because the mass-transfer resistance is not characterized. Copyright © 2013 Elsevier B.V. All rights reserved.

Effect of film size on drainage of foam and emulsion films

International Nuclear Information System (INIS)

Malhotra, A.K.; Wasan, D.T.

1987-01-01

All available theoretical analyses for the drainage of thin plane-parallel liquid films, such as those existing between two approaching liquid droplets or bubbles in the coalescence process, predict essentially the same dependence of rate of thinning of the intervening film on its size as is described by the Reynolds equation - that is, drainage time increases with the square of the film radius. Recently, the authors reported experimental data for both foam and emulsion films which showed that the measured drainage times increase with about a 0.8 power of the film radius, a value much smaller than the theoretically predicted value of 2.0. Here they present a hydrodynamic analysis to predict the experimentally observed effect of film size on the kinetics of thinning of emulsion and foam films. They extend the applicability of the Reynolds model by accounting for the flow in the Plateau borders as well as the London-van der Waals forces in the thin film phase. Their theoretical predictions are in good agreement with the experimental data on the dependence of drainage time of both foam and emulsion films on their radii

Superconducting thin films

International Nuclear Information System (INIS)

Hebard, A.F.; Vandenberg, J.M.

1982-01-01

This invention relates to granular metal and metal oxide superconducting films formed by ion beam sputter deposition. Illustratively, the films comprise irregularly shaped, randomly oriented, small lead grains interspersed in an insulating lead oxide matrix. The films are hillock-resistant when subjected to thermal cycling and exhibit unusual josephson-type switching characteristics. Depending on the oxygen content, a film may behave in a manner similar to that of a plurality of series connected josephson junctions, or the film may have a voltage difference in a direction parallel to a major surface of the film that is capable of being switched from zero voltage difference to a finite voltage difference in response to a current larger than the critical current

As Film Goes Byte: The Change From Analog to Digital Film Perception

OpenAIRE

Loertscher, Miriam Laura; Weibel, David; Spiegel, Simon; Flueckiger, Barbara; Mennel, Pierre; Mast, Fred; Iseli, Christian

2016-01-01

The digital revolution changed film production in many ways. Until the end of the 20th century, most film professionals and critics preferred celluloid film. However, no previous empirical study compared complete narrative films recorded with analog and digital cinematography. Three short narrative films were produced with an analog and a digital camera attached to a 3D rig in order to control all optical parameters. In postproduction, a third version of a digital film was created to mimic th...

As Film Goes Byte: The Change From Analog to Digital Film Perception.

OpenAIRE

Loertscher M. L. Weibel D. Spiegel S. Flueckiger B. Mennel P. Mast F. W. & Iseli C.

2016-01-01

The digital revolution changed film production in many ways. Until the end of the 20th century most film professionals and critics preferred celluloid film. However no previous empirical study compared complete narrative films recorded with analog and digital cinematography. Three short narrative films were produced with an analog and a digital camera attached to a 3D rig in order to control all optical parameters. In postproduction a third version of a digital film was created to mimic the a...

Demens Film

DEFF Research Database (Denmark)

Jensen, Anders Møller

2012-01-01

Vi vil skabe film til mennesker med demens – ikke film om demens sygdommen eller beretninger om livet og hverdagen med en kronisk lidelse. Filmene skal medvirke til at frembringe en behagelig stemning omkring og hos mennesker med demens, så hverdagen bliver så tryg som mulig. Filmene skal samtidig...... var at afgrænse og prioritere projektet, samt komme med anbefalinger omkring hvad der er vigtigt, i forbindelse med produktion af film målrettet mennesker med demens. Resultat af ekspertgruppen sammenfattes i denne rapport. Projektet gennemføres som et samarbejde mellem Retrospect Film...

Bagatellid : maailm / Nele-Eva Steinfeld, Ivo Heinloo

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2011-01-01

Muusikasõnumeid maailmast: Helsingis avati uus kultuurikeskus Helsingi Musiikkitalo. Montrealis sain endale uue kontserdimaja La Maison Symphonique de Montreal. Lahkus tenor Salvatore Licitra. James Levine loobus Metropolitan Opera sügishooaja etenduste dirigeerimisest. Iisraeli Filharmoonikute kontsert BBC Promsil häiritud. Deutsche Grammophon kolis Berliini. Siemens loobub Bayereuthi festivali spondeerimisest. Kultuurivahetus Viini Riigiooperi ja La Scala ooperiteatrite vahel. MTV premeeris popimaailma tippe. Hiina tsenseerib Lääne popmuusikuid. uus Grammyde jagamise kord põhjustab pahameelt. Return to Forever taas koos. Chick Corea juubel

Ag films deposited on Si and Ti: How the film-substrate interaction influences the nanoscale film morphology

Science.gov (United States)

Ruffino, F.; Torrisi, V.

2017-11-01

Submicron-thick Ag films were sputter deposited, at room temperature, on Si, covered by the native SiO2 layer, and on Ti, covered by the native TiO2 layer, under normal and oblique deposition angle. The aim of this work was to study the morphological differences in the grown Ag films on the two substrates when fixed all the other deposition parameters. In fact, the surface diffusivity of the Ag adatoms is different on the two substrates (higher on the SiO2 surface) due to the different Ag-SiO2 and Ag-TiO2 atomic interactions. So, the effect of the adatoms surface diffusivity, as determined by the adatoms-substrate interaction, on the final film morphology was analyzed. To this end, microscopic analyses were used to study the morphology of the grown Ag films. Even if the homologous temperature prescribes that the Ag film grows on both substrates in the zone I described by the structure zone model some significant differences are observed on the basis of the supporting substrate. In the normal incidence condition, on the SiO2/Si surface a dense close-packed Ag film exhibiting a smooth surface is obtained, while on the TiO2/Ti surface a more columnar film morphology is formed. In the oblique incidence condition the columnar morphology for the Ag film occurs both on SiO2/Si and TiO2/Ti but a higher porous columnar film is obtained on TiO2/Ti due to the lower Ag diffusivity. These results indicate that the adatoms diffusivity on the substrate as determined by the adatom-surface interaction (in addition to the substrate temperature) strongly determines the final film nanostructure.

Development of neutron diffuse scattering analysis code by thin film and multilayer film

International Nuclear Information System (INIS)

Soyama, Kazuhiko

2004-01-01

To research surface structure of thin film and multilayer film by neutron, a neutron diffuse scattering analysis code using DWBA (Distorted-Wave Bron Approximation) principle was developed. Subjects using this code contain the surface and interface properties of solid/solid, solid/liquid, liquid/liquid and gas/liquid, and metal, magnetism and polymer thin film and biomembran. The roughness of surface and interface of substance shows fractal self-similarity and its analytical model is based on DWBA theory by Sinha. The surface and interface properties by diffuse scattering are investigated on the basis of the theoretical model. The calculation values are proved to be agreed with the experimental values. On neutron diffuse scattering by thin film, roughness of surface of thin film, correlation function, neutron propagation by thin film, diffuse scattering by DWBA theory, measurement model, SDIFFF (neutron diffuse scattering analysis program by thin film) and simulation results are explained. On neutron diffuse scattering by multilayer film, roughness of multilayer film, principle of diffuse scattering, measurement method and simulation examples by MDIFF (neutron diffuse scattering analysis program by multilayer film) are explained. (S.Y.)To research surface structure of thin film and multilayer film by neutron, a neutron diffuse scattering analysis code using DWBA (Distorted-Wave Bron Approximation) principle was developed. Subjects using this code contain the surface and interface properties of solid/solid, solid/liquid, liquid/liquid and gas/liquid, and metal, magnetism and polymer thin film and biomembran. The roughness of surface and interface of substance shows fractal self-similarity and its analytical model is based on DWBA theory by Sinha. The surface and interface properties by diffuse scattering are investigated on the basis of the theoretical model. The calculation values are proved to be agreed with the experimental values. On neutron diffuse scattering

Uus plaat

Index Scriptorium Estoniae

2005-01-01

Uutest plaatidest A-Ha "The Singles 1984-2004", Andrea Bocelli "Andrea", Def Leppard "Best Of", Elton John "Peachtree Road", Eminem "Encore", ERA "The Very Best Of", Jay-Z and Linkin Park "Callision Course", Kylie Minogue "Ultimate Kylie", Scooter "Mind the Gap", Shania Twain "Greatest Hits", Tina Turner "All The Best", "True Love 2", U2 "How To Dismantle An Atomic Bomb", "Bridget Jones. Soundtrack"

Uus plaat

Index Scriptorium Estoniae

2004-01-01

Uutest plaatidest Marillion "Marbles", "The Prodigy", Massive Attack "Danny The Dog", Metallica "Some Kind Of Monster", Rammstein "Reise, Reise", Ahlee Simpson "Autobiography", Robbie Williams "Greatest Hits", Freestyles "Rawas F**K", "Michael Moore: Fahrenheit 9/11", Marilyn Manson "Lest We Forget", Gregorian "the Dark Side", Kool & The Kang "The Hits", Dream Theater "Live At Budokan", Feist "Let It Die", Compay Segundo, depeche Mode "Remixes", Bryan Adams "Room Service", mark Knopfler "Shangri La", Alfie "Soundtrack", Brian Wilson "Smile"

Uus plaat

Index Scriptorium Estoniae

2003-01-01

Uutest plaatidest John Cale "Hobosapiens", Sting "Sacred Love", R.E.M. "The Best of", Paul Oakenfold "Great Wall", Astor Piazolla "Remixed", Muse "Absolution", Texas "Careful What You Wish For", Robbie Williams "Live: Summer 2003", David Bowie "Black Tie White Noise", Francis Goya "Latin Romance", Bad Boys Blue "Around The World", Sõpruse Puiestee Mustale Merele"

Uus plaat

Index Scriptorium Estoniae

2004-01-01

Uutest plaatidest "Zuccero", Lanny Kravitz "Baptism", Alanis Morissette "So-Called Chaos", ABBA "The ABBA Story", Ash "Meltdown", Alya "They Died for Beuty", "Cafe del Moar. The Best of Jose Padilla, "Blue Note Revisited", Dingo "Dingomania"

Uus plaat

Index Scriptorium Estoniae

2003-01-01

Heliplaatidest: PS TRoika "Liitu meiega", Gicu Rau "Kaunid Eesti lood paaniflöödile", "Talvehitt 2004", Ice Cream "Oled minu järgi hull", Sõpruse Puiestee "Mustale merele", Metro Luminal "Ainult rottidele"

Uus plaat

Index Scriptorium Estoniae

2004-01-01

Uutest plaatidest Janet Jackson "Damita Jo", N.E.R.D. "Fly or Die", Oleg pissarenko Trio "The Little One's", "Dance Express", Neiokõsõ "Tii", Agnetha Fältskog "My Colouring Book", Diana Krall "The Girl In The Other Room", Hedvig Hanson & Andre Maaker "Nii õrn on öö", "D12 world", Blank&Jones "Monument", "Rock Ballads", "The Passion of The Christ", "Anastacia", "Kill Bill. Vol.2", Metro Luminal "Coca Cola, "No-Big-Silence & Kosmikud", Londonbeat "The very Best Of"

Uus plaat

Index Scriptorium Estoniae

2004-01-01

Uutest plaatidest Barry White "Love Songs", Charizma "Life in 3D", Toto Cutugno "il treno va...", "Talkin Loud 1990-1994", Delta Goodrem "Innocent Eyes", Astrud Gilberto "Astrud For Lovers", "Groove Is In The Heart", "The Last Samurai", Patricia Kaas "Sexe & Fort", Norah Jones "Feels Like Home", LeAnn Rimes "The Best Of", "Kumad Eesti hitid 2004", Thursday "War All The Time", Damageplan "New Found Power", Deep Purplr "Purpendicular", "Trance Allstars", Joseph Haydn "Symphonies 1-104", "Takorautaa", "DJ Esko. Setti2"

Uus plaat

Index Scriptorium Estoniae

2004-01-01

Uutest plaatidest Europe "Start From The Dark", The Music "Welcome To The North", K.D. Lang "hymns of the 49th parallel", Tom jones & Jools Holland, Phil Collins "Love Songs", Moby "Play: The B Sides", Los Lonely Boys, Joe Cocker "Heart & Soul", Louis Armstrong "What A Wonderful World", The Harem World Tour "Live From Las Vegas", R.E.M. "Around The Sun", "Late Nigth Moods", Jean Michel Jarre "AERO", Norah Jones "Feels Like Home"

Uus plaat

Index Scriptorium Estoniae

2002-01-01

Uutest plaatidest Bobby McFerrin "Beyond Words", Terri Lyne Carrington "Jazzs A Sirit", Bugge Wesseltorf "Moving", Richard Bona " Reverence", "Rull's Royce Rull's Choice", Trilok Gurtu "The Beat Of Love", Stan Getz "Getz For Lovers", Billy Cobham, "Drum'n'Voice - All That Groove", Pat Metheny "Speacing Of Now", Kimmo Pohjonen "Kluster", Fred Frith "Digital Wildlife", Uri Caine "Rio", Bobby Previte. Bump The Renaissance Band "Just Add Water", Keith Jarrett, Gary Peacock, Jack DeJohnette "Inside Out"

Uus plaat

Index Scriptorium Estoniae

2003-01-01

Uutest plaatidest Celine Dion "1 fille & 4 types", "Travel Hits", Richard Clayderman "What A Wonderful World", Francis Gaya "Gold", David Bovie "Reality", Metro Luminal "Ainult rottidele", P.O.D. "Payable On Death", Tuulemaa "Küll süda teab", Tori Amos "Tales of a Librarian", Red Hot Chili Pepüers "Greatest Hits", Michael Jackson "Number Ones", Stone Temple Pilots "Thank You", Sonique "Born To Be Free", The Black Eyed Peas "Elephunk", Obie Trice "Cheers", One-T "L'album", "The Lords of Mystery", Ludacris "Chicken Beer", Lumidee "Almoust Famous", Robert Plant "Sixty Six To Timbuktu", Enrique Iglesias "Seven"

Film beyond boundaries: film, migrant narratives and other media Film beyond boundaries: film, migrant narratives and other media

Directory of Open Access Journals (Sweden)

Anelise Reich Corseuil

2008-04-01

Full Text Available The articles here presented are representative of the debates about the various transformational aspects of film studies, fostering the discussion about the transformations and interactions between national and international narrative forms, the interrelations between film and literature, and film with other media. The critical perspectives here presented range from an emphasis on cultural materialism, dialogism, reception theory, deconstructionism, narrative studies to film aesthetics or film genre, and can be grouped in three major interrelated areas of film studies: adaptation studies, representation and aesthetics, and film and other media. All of them enable a critical perspective as regards the fluidity of the boundaries separating film from other media, such as literature, television, DVDs, and video games, as newer narrative forms that are incorporated by film, and the transformations in terms of aesthetics and forms of representation in contemporary film and media (the transgeneric nature of film, the interrelations between national and international cinemas, and the demands for a broader perception of the overwhelming mediations of the image in our contemporary society. Moreover, the articles are inserted within recent critical debates on adaptation, digital media and national and transnational cinema (Naremore, Sobchack, Druckery and Williams. All articles combine important theoretical concerns with the analysis of specific films. Robert Stam's “Teoria e Prática da Adaptação: da Fidelidade à Intertextualidade” (“Theory and the practice of adaptation: from fidelity to intertextuality” offers a rich perspective on the issue of adaptation in its relationship with critical theory. He analyses the changing critical views on adaptation, which go from the priority given to the canonic literary text, as an origin, to a more fluid, intertextual and dialogical approach to film adaptation. Drawing from Bakhtin's concept of

Danish independent film, or how to make films without public funding

DEFF Research Database (Denmark)

Hansen, Kim Toft

Studying independent film in Denmark is a new and interesting way to analyse power relations in Danish film productions. The sheer magnitude of Danish indiefilms is in itself a very convincing voice to be heard. Throughout the past almost two decades we have seen a developing challenge to the typ......Studying independent film in Denmark is a new and interesting way to analyse power relations in Danish film productions. The sheer magnitude of Danish indiefilms is in itself a very convincing voice to be heard. Throughout the past almost two decades we have seen a developing challenge...... known as – Danish independent film is the American director Robert Rodriguez and especially his book Rebel without a crew (1995). The book is a diary of his first successful feature film production El mariachi (1992) and, basically, here he outlines a very different do-it-yourself-method of film...

Contributions of Film Introductions and Film Summaries to Learning from Instructional Films.

Science.gov (United States)

Lathrop, C. W., Jr.; Norford, C. A.

An exploratory study of the contribution to learning of typical introductory and summarizing sequences in instructional films underlined the need for further experimental work to determine what kinds of introductory and concluding sequences are most useful in promoting learning from films. The first part of the study was concerned with film…

Films and dark room

International Nuclear Information System (INIS)

Abdul Nassir Ibrahim; Azali Muhammad; Ab. Razak Hamzah; Abd. Aziz Mohamed; Mohamad Pauzi Ismail

2008-01-01

After we know where the radiographic come from, then we must know about the film and also dark room. So, this chapter 5 discusses the two main components for radiography work that is film and dark room, places to process the film. Film are structured with three structured that are basic structured, emulsion and protection structured. So, this film can be classified either with their speed, screen and standard that used. The process to wash the film must be done in dark room otherwise the radiographer cannot get what are they inspected. The processing of film will be discussed briefly in next chapter.

ANALISIS SUDUT PANDANG KAMERA (Studi kasus: Film Jelangkung dan Film The Ring 1

Directory of Open Access Journals (Sweden)

Listia Natadjaja

2005-01-01

Full Text Available Horror movie is one of the strengths of Indonesian film industry; however it is not so popular in the International market. Thus%2C an analysis is needed to determine what the strengths are of another horror movie that has achieved global recognition. This analysis trie s to examine film angles that could be one of the important factors in audio visual in creating horror movies. The Ring 1 is chosen as a comparison to Indonesian horror movie. The Ring 1 has the most world recognition%2C and it has been re-made by Korean and American horror movie makers. Jelangkung is chosen because it is the pioneer of horror movies in Indonesia and has inspired other movies in the same genre. Both films are analyzed from the camera angle aspect which gives the horror effect. Abstract in Bahasa Indonesia : Film horor merupakan salah satu kekuatan perfilman layar lebar di Indonesia.%2C akan tetapi film horor Indonesia kurang dapat menyebar di pasaran Internasional. Oleh karena itu%2C suatu analisis diperlukan untuk mengetahui apakah kekuatan-kekuatan yang dimiliki oleh film horor negara-negara lain yang banyak digemari masyarakat global terutama dari sudut pandang kamera yang merupakan salah satu faktor penting dalam menciptakan kesan horor pada suatu film. Film The Ring 1 dipilih sebagai pedoman perbandingan film horor Indonesia%2C karena film The Ring 1 adalah film horor yang sangat banyak diminati oleh masyarakat di seluruh dunia%2C bahkan telah diremake oleh Korea dan USA. Film Horor Indonesia yang dipilih adalah film Jelangkung yang pertama kali muncul pada film layar lebar dan menjadi cikal bakal munculnya banyak film layar lebar di Indonesia dengan genre yang sama. Analisa kedua film ini ditinjau dari sudut pandang kamera yang dapat menampilkan kesan horor. horror movie%2C camera angle%2C Indonesia%2C Japan.

Electrochromic nanocomposite films

Science.gov (United States)

Milliron, Delia; Llordes, Anna; Buonsanti, Raffaella; Garcia, Guillermo

2018-04-10

The present invention provides an electrochromic nanocomposite film. In an exemplary embodiment, the electrochromic nanocomposite film, includes (1) a solid matrix of oxide based material and (2) transparent conducting oxide (TCO) nanostructures embedded in the matrix. In a further embodiment, the electrochromic nanocomposite film farther includes a substrate upon which the matrix is deposited. The present invention also provides a method of preparing an electrochromic nanocomposite film.

Defining Documentary Film

DEFF Research Database (Denmark)

Juel, Henrik

2006-01-01

A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film......A discussion of various attemts at defining documentary film regarding form, content, truth, stile, genre or reception - and a propoposal of a positive list of essential, but non-exclusive characteristica of documentary film...

Film Noir Style Genealogy

OpenAIRE

Rietuma, Dita

2012-01-01

Annotation for the Doctoral Work Film Noir Style Genealogy (The Genealogy of the Film Noir Style) The doctoral work topic Film Noir Style Genealogy encompasses traditionally approved world film theory views on the concept of film noir and its related cinematographic heritage, and an exploration of its evolution and distinctive style, including – the development of film noir in the USA, Europe, and also in Latvia, within the context of both socio-political progression and the paradigm of m...

ZnO film deposition on Al film and effects of deposition temperature on ZnO film growth characteristics

International Nuclear Information System (INIS)

Yoon, Giwan; Yim, Munhyuk; Kim, Donghyun; Linh, Mai; Chai, Dongkyu

2004-01-01

The effects of the deposition temperature on the growth characteristics of the ZnO films were studied for film bulk acoustic wave resonator (FBAR) device applications. All films were deposited using a radio frequency magnetron sputtering technique. It was found that the growth characteristics of ZnO films have a strong dependence on the deposition temperature from 25 to 350 deg. C. ZnO films deposited below 200 deg. C exhibited reasonably good columnar grain structures with highly preferred c-axis orientation while those above 200 deg. C showed very poor columnar grain structures with mixed-axis orientation. This study seems very useful for future FBAR device applications

Science Fiction on Film.

Science.gov (United States)

Burmester, David

1985-01-01

Reviews science fiction films used in a science fiction class. Discusses feature films, short science fiction films, short story adaptations, original science fiction pieces and factual science films that enrich literature. (EL)

Thin Film Microbatteries

International Nuclear Information System (INIS)

Dudney, Nancy J.

2008-01-01

Thin film batteries are built layer by layer by vapor deposition. The resulting battery is formed of parallel plates, much as an ordinary battery construction, just much thinner. The figure (Fig. 1) shows an example of a thin film battery layout where films are deposited symmetrically onto both sides of a supporting substrate. The full stack of films is only 10 to 15 (micro)m thick, but including the support at least doubles the overall battery thickness. When the support is thin, the entire battery can be flexible. At least six companies have commercialized or are very close to commercializing such all-solid-state thin film batteries and market research predicts a growing market and a variety of applications including sensors, RFID tags, and smarter cards. In principle with a large deposition system, a thin film battery might cover a square meter, but in practice, most development is targeting individual cells with active areas less than 25 cm 2 . For very small battery areas, 2 , microfabrication processes have been developed. Typically the assembled batteries have capacities from 0.1 to 5 mAh. The operation of a thin film battery is depicted in the schematic diagram (Fig. 2). Very simply, when the battery is allowed to discharge, a Li + ion migrates from the anode to the cathode film by diffusing through the solid electrolyte. When the anode and cathode reactions are reversible, as for an intercalation compound or alloy, the battery can be recharged by reversing the current. The difference in the electrochemical potential of the lithium determines the cell voltage. Most of the thin films used in current commercial variations of this thin film battery are deposited in vacuum chambers by RF and DC magnetron sputtering and by thermal evaporation onto unheated substrates. In addition, many publications report exploring a variety of other physical and chemical vapor deposition processes, such as pulsed laser deposition, electron cyclotron resonance sputtering, and

One-step aerosol synthesis of nanoparticle agglomerate films: simulation of film porosity and thickness

International Nuclear Information System (INIS)

Maedler, Lutz; Lall, Anshuman A; Friedlander, Sheldon K

2006-01-01

A method is described for designing nanoparticle agglomerate films with desired film porosity and film thickness. Nanoparticle agglomerates generated in aerosol reactors can be directly deposited on substrates to form uniform porous films in one step, a significant advance over existing technologies. The effect of agglomerate morphology and deposition mechanism on film porosity and thickness are discussed. Film porosity was calculated for a given number and size of primary particles that compose the agglomerates, and fractal dimension. Agglomerate transport was described by the Langevin equation of motion. Deposition enhancing forces such as thermophoresis are incorporated in the model. The method was validated for single spherical particles using previous theoretical studies. An S-shape film porosity dependence on the particle Peclet number typical for spherical particles was also observed for agglomerates, but films formed from agglomerates had much higher porosities than films from spherical particles. Predicted film porosities compared well with measurements reported in the literature. Film porosities increased with the number of primary particles that compose an agglomerate and higher fractal dimension agglomerates resulted in denser films. Film thickness as a function of agglomerate deposition time was calculated from the agglomerate deposition flux in the presence of thermophoresis. The calculated film thickness was in good agreement with measured literature values. Thermophoresis can be used to reduce deposition time without affecting the film porosity

Pop nädal : Popuudised. Edetabel The Billboard 200 Top 20. Plaadiarvustus : The Jesus and Mary Chain - 21 Singles / Aivar Meos

Index Scriptorium Estoniae

Meos, Aivar

2002-01-01

8. okt. saabub müügile ansambli Jurassic 5 uus album "Power In Numbers", millel laulab ka Nelly Furtado. Šokk-rokkar Marilyn Manson avaldab peatselt uue kontsert-video/DVD "Guns, God and Government". Intellektuaalset industriaalmuusikat viljelev ansambel Einstürzende Neubauten annab oma Interneti aadressi: http://www.neubauten.org., teatades, et 23. sünnipäeva tähistamiseks peaks 2003. aasta kevadeks valmima bändil uus album. Christina Aguilera uuest singlist "Let's Get Dirty". Ansamblist The Jesus and Mary Chain

Kas uus teerull või uus poliitika? / Ivar Tallo

Index Scriptorium Estoniae

Tallo, Ivar, 1964-

2003-01-01

Autor küsib, kas koalitsioonileppe näol on tegemist ühiste väärtuste deklaratsiooni, järgmiste aastate riigivalitsemise tegevuskava või kohtade jaotusega riigi juhtimiseks. Riigieelarve teadliku vähendamise probleemist

On extracting physical content from asymptotically flat spacetime metrics

International Nuclear Information System (INIS)

Kozameh, C; Newman, E T; Silva-Ortigoza, G

2008-01-01

A major issue in general relativity, from its earliest days to the present, is how to extract physical information from any solution or class of solutions to the Einstein equations. Though certain information can be obtained for arbitrary solutions, e.g., via geodesic deviation, in general, because of the coordinate freedom, it is often hard or impossible to do. Most of the time information is found from special conditions, e.g. degenerate principle null vectors, weak fields close to Minkowski space (using coordinates close to Minkowski coordinates), or from solutions that have symmetries or approximate symmetries. In the present work, we will be concerned with asymptotically flat spacetimes where the approximate symmetry is the Bondi-Metzner-Sachs group. For these spaces the Bondi 4-momentum vector and its evolution, found from the Weyl tensor at infinity, describes the total energy-momentum of the interior source and the energy-momentum radiated. By generalizing the structures (shear-free null geodesic congruences) associated with the algebraically special metrics to asymptotically shear-free null geodesic congruences, which are available in all asymptotically flat spacetimes, we give kinematic meaning to the Bondi 4-momentum. In other words, we describe the Bondi vector and its evolution in terms of a center of mass position vector, its velocity and a spin vector, all having clear geometric meaning. Among other items, from dynamic arguments, we define a unique (at our level of approximation) total angular momentum and extract its evolution equation in the form of a conservation law with an angular momentum flux

Films--Too Good for Words. A Directory of Nonnarrated 16mm Films.

Science.gov (United States)

Parlato, Salvatore J., Jr.

A nonnarrated film is one that communicates pictorially on the strength of its visual unity, continuity, and coherence without relying on narration or dialogue. This directory lists 1,000 such 16mm films, mostly curriculum-oriented educational films, in three main parts. The first part describes films under subject headings such as the arts, other…

Buy, Borrow, or Steal? Film Access for Film Studies Students

Science.gov (United States)

Rodgers, Wendy

2018-01-01

Libraries offer a mix of options to serve the film studies curriculum: streaming video, DVDs on Reserve, and streaming DVDs through online classrooms. Some professors screen films and lend DVDs to students. But how do students obtain the films required for their courses? How would they prefer to do so? These are among the questions explored using…

Framing Persoalan Indonesia Melalui Film Dokumenter Model Direct Cinema (Studi Pada Film-film Dokumenter Terbaik, Program Eagle Award Competitions Di Metro TV)

OpenAIRE

Styo Wibowo, Novin Farid

2013-01-01

FRAMING PERSOALAN INDONESIA MELALUI FILM DOKUMENTER MODELDIRECT CINEMA(STUDI PADA FILM-FILM DOKUMENTER TERBAIK, PROGRAM EAGLEAWARD COMPETITIONS DI METRO TV)Frames Indonesia Issues Through Direct Cinema DocumentaryFilm On Television (Framing Analysis of the 3 Best Documentary Film, Eagle AwardCompetitions Program at Metro TV)Novin Farid Styo WibowoJurusan Ilmu Komunikasi, Fakultas Ilmu Sosial dan Ilmu PolitikUniversitas Muhammadiyah MalangEmail : TThe research disc...

The scalar wave equation in a Schwarzschild space-time

International Nuclear Information System (INIS)

Schmidt, B.G.; Stewart, J.M.

1979-01-01

This paper studies the asymptotic behaviour of solutions of the zero rest mass scalar wave equation in the Schwarzschild space-time in a neighbourhood of spatial infinity which includes parts of future and pass null infinity. The behaviour of such fields is essentially different from that which occurs in a flat space-time. In particular fields which have a Bondi-type expansion in powers of 'r(-1)' near past null infinity do not have such an expansion near future null infinity. Further solutions which have physically reasonable Cauchy data probably fail to have Bondi-type expansions near null infinity. (author)

Uniformly irradiated polymer film

International Nuclear Information System (INIS)

Fowler, S.L.

1979-01-01

Irradiated film having substantial uniformity in the radiation dosage profile is produced by irradiating the film within a trough having lateral deflection blocks disposed adjacent the film edges for deflecting electrons toward the surface of the trough bottom for further deflecting the electrons toward the film edge

Dokumentaalsusest teatris 2015. aasta näitel / Madli Pesti

Index Scriptorium Estoniae

Pesti, Madli, 1980-

2016-01-01

Dokumentaalteatri olemusest ning 2015. aastal esietendunud lavastustest "Kodumaa karjed" (NO99), "45 339 km² raba" (Endla), "non-sto SETO" (Taarka pärimusteater), "5 grammi sisemist rahu" (Must Kast), "Õpetaja Tammiku rehabiliteerimine" (Kinoteater), "1i" (Nukuteater), "Ma olen Ivo Linna" (eraprojekt), "Mamma lood" (MTÜ Hiiu Öko), "Kehameel" (Teatri- ja Muusikamuuseum), "kokku kukkumise hetk" (Tartu Uus Teater), "Baskin ehk Nalja põhivormid" (Tartu Uus Teater), "Ajarefrään" (Nukuteater), "Tõelised naised, tõelised mehed ja tõelised teised" (Vaba Lava), "sugu: N" (Vaba Lava), "Fantastika" (NO99)

Tööandjate unistuste seaduse autorid olid tegelikult sotsid / Marika Tuus

Index Scriptorium Estoniae

Tuus, Marika, 1951-

2008-01-01

Uue töölepingu seaduse eelnõust. Ilmunud ka Virumaa Teataja 29. jaan. 2008, lk. 11 ; Hiiu Leht 29. jaan. 2008, lk. 2 ; Pärnu Postimees 29. jaan. 2008, lk. 15 ; Vali Uudised 30. jaan. 2008, lk. 2, pealkiri kujul: uus orjaaeg ; Meie Maa 29. jaan. 2008, lk. 2 ; Põhjarannik 30. jaan. 2008, lk. 2 ; Lääne Elu 29. jaan. 2008, lk. 2 ; Elva Postipoiss 2. veeb. 2008, lk. 4, pealkiri kujul: Kas uus orjaaeg? ; Kesknädal 6. veeb. 2008, lk. 2 ; Vooremaa 14. veeb. 2008, lk. 2

Film in concert

OpenAIRE

2017-01-01

From the very beginning of cinema, music always played an important role in the history of filmmaking. Nonetheless, film music is judged by critics as a kind of low-grade art form. However, the majority of film score composers enjoyed a classical education and composed as well for the silver screen as for the concert hall. Film music also has its roots in the musical era of romanticism. Therefore, symphonic film scores can be regarded as program music in a broader sense. These scores were inf...

Quality of YBCO thin films grown on LAO substrates exposed to the film deposition - film removal processes

Energy Technology Data Exchange (ETDEWEB)

Blagoev, B; Nurgaliev, T [Institute of Electronics, Bulgarian Academy of Sciences, 72 Tzarigradsko Chaussee, 1784 Sofia (Bulgaria); Mozhaev, P B [Institute of Physics and Technology, Russian Academy of Sciences, 117218 Moscow (Russian Federation); Sardela, M; Donchev, T [Materials Research Laboratory, University of Illinois, 104 South Goodwin Ave., Urbana, IL 61801 (United States)], E-mail: blago_sb@yahoo.com

2008-05-01

The characteristics are investigated of high temperature superconducting YBa{sub 2}Cu{sub 3}O{sub 7} (YBCO) films grown on LaAlO{sub 3} (LAO) substrates being exposed a different number of times to YBCO film deposition and acid-solution-based cleaning procedures. Possible mechanisms of degradation of the substrate surface quality reflecting on the growing YBCO film parameters are discussed and analyzed.

Evaluation and mitigation of potential errors in radiochromic film dosimetry due to film curvature at scanning.

Science.gov (United States)

Palmer, Antony L; Bradley, David A; Nisbet, Andrew

2015-03-08

This work considers a previously overlooked uncertainty present in film dosimetry which results from moderate curvature of films during the scanning process. Small film samples are particularly susceptible to film curling which may be undetected or deemed insignificant. In this study, we consider test cases with controlled induced curvature of film and with film raised horizontally above the scanner plate. We also evaluate the difference in scans of a film irradiated with a typical brachytherapy dose distribution with the film naturally curved and with the film held flat on the scanner. Typical naturally occurring curvature of film at scanning, giving rise to a maximum height 1 to 2 mm above the scan plane, may introduce dose errors of 1% to 4%, and considerably reduce gamma evaluation passing rates when comparing film-measured doses with treatment planning system-calculated dose distributions, a common application of film dosimetry in radiotherapy. The use of a triple-channel dosimetry algorithm appeared to mitigate the error due to film curvature compared to conventional single-channel film dosimetry. The change in pixel value and calibrated reported dose with film curling or height above the scanner plate may be due to variations in illumination characteristics, optical disturbances, or a Callier-type effect. There is a clear requirement for physically flat films at scanning to avoid the introduction of a substantial error source in film dosimetry. Particularly for small film samples, a compression glass plate above the film is recommended to ensure flat-film scanning. This effect has been overlooked to date in the literature.

Spectator's trust as an indicator of film authorship: Is Vinterberg a film auteur?

NARCIS (Netherlands)

van der Pol, G.

2015-01-01

In this article, the Trust Model is presented as a new theory to tackle the old film theoretical problem of distinguishing film directors from film auteurs. The model proposes that in certain films, the spectator becomes problematically engaged to the fiction and to certain characters. During the

Getting into Film.

Science.gov (United States)

London, Mel

This book describes the various aspects of the film industry and the many jobs related to filmmaking, stressing that no "formula" exists for finding a successful career in the film industry. Chapters provide information on production, writing for film, cinematography, editing, music, sound, animation and graphics, acting and modeling, the "unsung…

The Sponsored Film.

Science.gov (United States)

Klein, Walter J.

For public relations professionals and would-be sponsors of films, this book provides guidelines for understanding the film medium and its potential as a persuasive force in industry, government, organizations, and religious orders. For filmmakers, it brings together practical information needed to survive in the sponsored-film industry and to…

Ceramic Composite Thin Films

Science.gov (United States)

Ruoff, Rodney S. (Inventor); Stankovich, Sasha (Inventor); Dikin, Dmitriy A. (Inventor); Nguyen, SonBinh T. (Inventor)

2013-01-01

A ceramic composite thin film or layer includes individual graphene oxide and/or electrically conductive graphene sheets dispersed in a ceramic (e.g. silica) matrix. The thin film or layer can be electrically conductive film or layer depending the amount of graphene sheets present. The composite films or layers are transparent, chemically inert and compatible with both glass and hydrophilic SiOx/silicon substrates. The composite film or layer can be produced by making a suspension of graphene oxide sheet fragments, introducing a silica-precursor or silica to the suspension to form a sol, depositing the sol on a substrate as thin film or layer, at least partially reducing the graphene oxide sheets to conductive graphene sheets, and thermally consolidating the thin film or layer to form a silica matrix in which the graphene oxide and/or graphene sheets are dispersed.

Non-relativistic Bondi-Metzner-Sachs algebra

Science.gov (United States)

Batlle, Carles; Delmastro, Diego; Gomis, Joaquim

2017-09-01

We construct two possible candidates for non-relativistic bms4 algebra in four space-time dimensions by contracting the original relativistic bms4 algebra. bms4 algebra is infinite-dimensional and it contains the generators of the Poincaré algebra, together with the so-called super-translations. Similarly, the proposed nrbms4 algebras can be regarded as two infinite-dimensional extensions of the Bargmann algebra. We also study a canonical realization of one of these algebras in terms of the Fourier modes of a free Schrödinger field, mimicking the canonical realization of relativistic bms4 algebra using a free Klein-Gordon field.

Solid thin film materials for use in thin film charge-coupled devices

International Nuclear Information System (INIS)

Lynch, S.J.

1983-01-01

Solid thin films deposited by vacuum deposition were evaluated to ascertain their effectiveness for use in the manufacturing of charge-coupled devices (CCDs). Optical and electrical characteristics of tellurium and Bi 2 Te 3 solid thin films were obtained in order to design and to simulate successfully the operation of thin film (TF) CCDs. In this article some of the material differences between single-crystal material and the island-structured thin film used in TFCCDs are discussed. The electrical parameters were obtained and tabulated, e.g. the mobility, conductivity, dielectric constants, permittivity, lifetime of holes and electrons in the thin films and drift diffusion constants. The optical parameters were also measured and analyzed. After the design was complete, experimental TFCCDs were manufactured and were successfully operated utilizing the aforementioned solid thin films. (Auth.)

[Application of biodegradable plastic film to reduce plastic film residual pollution in Chinese agriculture].

Science.gov (United States)

Yan, Changrong; He, Wenqing; Xue, Yinghao; Liu, Enke; Liu, Qin

2016-06-25

Plastic film has become an important agriculture production material in recent years. Over the past three decades, the amount and application area of plastic film have increased steadily, and in 2014, which are 1.4 million tons and more than 180 million hm² respectively. It plays a key role for ensuring the supply of agricultural goods in China. Meanwhile, plastic film residual pollution becomes more and more serious, and in some regions, the amount of plastic film residues has reached over 250 kg/hm². In part of the Northwest region, soil structure of farmland has been destroyed by plastic film residues and then crop growth and farming operations were suppressed. It is recognized as a good choice to replace plastic film with biodegradable plastic film, an effective measure to solve the plastic film residue pollution. Now, it is in a critical stage of study and assessment of biodegradable plastic film in China and fortunately some biodegradable plastic films show effects in the production of potatoes, peanuts and tobacco. Overall, a series of challenges has still been faced by the biodegradable plastic film, mainly including improving the quality of biodegradable plastic products, such as tensile strength, flexibility, improving the controllability of rupture and degradation, enhancing the ability of increasing soil temperature and preserving soil moisture, and to satisfy the demand of crops production with mulching. In addition, it is essential to reduce the cost of the biodegradable film and promote the application of biodegradable film on large-scale. With the development of biodegradable plastic technology and agricultural production environment, the application of the biodegradable film will have a good future.

IAEA film library

International Nuclear Information System (INIS)

1959-01-01

Most of the scientific and technical films shown during the Second Geneva Conference for the Peaceful Uses of Atomic Energy were donated to IAEA by the producing countries at the end of the Conference. They will form the basic stock for the Agency's loan service intended to provide atomic energy institutions in Member States with film material. A detailed catalogue of the films, classified according to subject and giving conditions of loan or purchase, is now being prepared. In addition to this, information on all films produced in Member Countries dealing with the peaceful uses cf atomic energy is being assembled. The documentary information contained in the films in IAEA's possession relates to the following subjects: national programmes; nuclear physics; accelerators; plasma and fusion; reactors (power, research, material testing and experimental); prospecting and mining; ore dressing; metallurgy; production of fuel elements; treatment of irradiated fuel elements; protection against radiation; detection and counting; uses of radiation in medicine, biochemistry, agriculture and industry; industrial application of nuclear explosions. Most of the commentaries are in the language of the producing country. A few films are available in a choice of two languages. The films donated to the Agency total 82, two of which have been produced in Canada, 13 in France, one in India, one in Romania, one in Spain, 14 in the United Kingdom, one in the Union of South Africa, 47 in the United States of America and two in the USSR: they are mostly illustrations of papers presented at the Second Geneva Conference. In arranging for the circulation of scientific and technical films IAEA wishes to help meet some of the training and information needs of Member States. It is hoped that all organizations producing films on the peaceful uses of atomic energy will entrust copies to the IAEA with a view to their widest possible circulation. In the meantime, the Agency's films have been given

IAEA film library

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-01-15

Most of the scientific and technical films shown during the Second Geneva Conference for the Peaceful Uses of Atomic Energy were donated to IAEA by the producing countries at the end of the Conference. They will form the basic stock for the Agency's loan service intended to provide atomic energy institutions in Member States with film material. A detailed catalogue of the films, classified according to subject and giving conditions of loan or purchase, is now being prepared. In addition to this, information on all films produced in Member Countries dealing with the peaceful uses cf atomic energy is being assembled. The documentary information contained in the films in IAEA's possession relates to the following subjects: national programmes; nuclear physics; accelerators; plasma and fusion; reactors (power, research, material testing and experimental); prospecting and mining; ore dressing; metallurgy; production of fuel elements; treatment of irradiated fuel elements; protection against radiation; detection and counting; uses of radiation in medicine, biochemistry, agriculture and industry; industrial application of nuclear explosions. Most of the commentaries are in the language of the producing country. A few films are available in a choice of two languages. The films donated to the Agency total 82, two of which have been produced in Canada, 13 in France, one in India, one in Romania, one in Spain, 14 in the United Kingdom, one in the Union of South Africa, 47 in the United States of America and two in the USSR: they are mostly illustrations of papers presented at the Second Geneva Conference. In arranging for the circulation of scientific and technical films IAEA wishes to help meet some of the training and information needs of Member States. It is hoped that all organizations producing films on the peaceful uses of atomic energy will entrust copies to the IAEA with a view to their widest possible circulation. In the meantime, the Agency's films have been given

Film: Genres and Genre Theory

DEFF Research Database (Denmark)

Bondebjerg, Ib

2015-01-01

Genre is a concept used in film studies and film theory to describe similarities between groups of films based on aesthetic or broader social, institutional, cultural, and psychological aspects. Film genre shares similarities in form and style, theme, and communicative function. A film genre...

Meteor Film Recording with Digital Film Cameras with large CMOS Sensors

Science.gov (United States)

Slansky, P. C.

2016-12-01

In this article the author combines his professional know-how about cameras for film and television production with his amateur astronomy activities. Professional digital film cameras with high sensitivity are still quite rare in astronomy. One reason for this may be their costs of up to 20 000 and more (camera body only). In the interim, however,consumer photo cameras with film mode and very high sensitivity have come to the market for about 2 000 EUR. In addition, ultra-high sensitive professional film cameras, that are very interesting for meteor observation, have been introduced to the market. The particular benefits of digital film cameras with large CMOS sensors, including photo cameras with film recording function, for meteor recording are presented by three examples: a 2014 Camelopardalid, shot with a Canon EOS C 300, an exploding 2014 Aurigid, shot with a Sony alpha7S, and the 2016 Perseids, shot with a Canon ME20F-SH. All three cameras use large CMOS sensors; "large" meaning Super-35 mm, the classic 35 mm film format (24x13.5 mm, similar to APS-C size), or full format (36x24 mm), the classic 135 photo camera format. Comparisons are made to the widely used cameras with small CCD sensors, such as Mintron or Watec; "small" meaning 12" (6.4x4.8 mm) or less. Additionally, special photographic image processing of meteor film recordings is discussed.

Demens Film

DEFF Research Database (Denmark)

Ridder, Hanne Mette Ochsner

2012-01-01

I forbindelse med opstarten af Demens Film projektet har der været nedsat en ekspertgruppe, som er kommet med en række anbefalinger omkring film til mennesker med demens. Anbefalingerne skal bruges i de næste faser af projektet. Deltagerne i ekspertgruppen var sammensat af en bred gruppe...... fagpersoner inde for forskellige fagområder. Læs mere om gruppens anbefalinger og sammensætning af ekspertgruppen i den kort rapport som er offentlig tilgængelig. Læs Ekspertgruppe anbefalingerne til Demens Film projekt....

Effect of diffraction and film-thickness gradients on wafer-curvature measurements of thin-film stress

International Nuclear Information System (INIS)

Breiland, W.G.; Lee, S.R.; Koleske, D.D.

2004-01-01

When optical measurements of wafer curvature are used to determine thin-film stress, the laser beams that probe the sample are usually assumed to reflect specularly from the curved surface of the film and substrate. Yet, real films are not uniformly thick, and unintended thickness gradients produce optical diffraction effects that steer the laser away from the ideal specular condition. As a result, the deflection of the laser in wafer-curvature measurements is actually sensitive to both the film stress and the film-thickness gradient. We present a Fresnel-Kirchhoff optical diffraction model of wafer-curvature measurements that provides a unified description of these combined effects. The model accurately simulates real-time wafer-curvature measurements of nonuniform GaN films grown on sapphire substrates by vapor-phase epitaxy. During thin-film growth, thickness gradients cause the reflected beam to oscillate asymmetrically about the ideal position defined by the stress-induced wafer curvature. This oscillating deflection has the same periodicity as the reflectance of the growing film, and the deflection amplitude is a function of the film-thickness gradient, the mean film thickness, the wavelength distribution of the light source, the illuminated spot size, and the refractive indices of the film and substrate. For typical GaN films grown on sapphire, misinterpretation of these gradient-induced oscillations can cause stress-measurement errors that approach 10% of the stress-thickness product; much greater errors occur in highly nonuniform films. Only transparent films can exhibit substantial gradient-induced deflections; strongly absorbing films are immune

Film-thickness and composition dependence of epitaxial thin-film PZT-based

NARCIS (Netherlands)

Nguyen, Duc Minh; Dekkers, Jan M.; Vu, Hung Ngoc; Rijnders, Augustinus J.H.M.

2013-01-01

The transverse piezoelectric coefficient e31,f and mass-sensitivity were measured on piezoelectric cantilevers based on epitaxial PZT thin-films with film-thicknesses ranging from 100 to 2000 nm. The highest values of e31,f and mass-sensitivity were observed at a film thickness of 500–750 nm, while

Development of Anti-Insect Microencapsulated Polypropylene Films Using a Large Scale Film Coating System.

Science.gov (United States)

Song, Ah Young; Choi, Ha Young; Lee, Eun Song; Han, Jaejoon; Min, Sea C

2018-04-01

Films containing microencapsulated cinnamon oil (CO) were developed using a large-scale production system to protect against the Indian meal moth (Plodia interpunctella). CO at concentrations of 0%, 0.8%, or 1.7% (w/w ink mixture) was microencapsulated with polyvinyl alcohol. The microencapsulated CO emulsion was mixed with ink (47% or 59%, w/w) and thinner (20% or 25%, w/w) and coated on polypropylene (PP) films. The PP film was then laminated with a low-density polyethylene (LDPE) film on the coated side. The film with microencapsulated CO at 1.7% repelled P. interpunctella most effectively. Microencapsulation did not negatively affect insect repelling activity. The release rate of cinnamaldehyde, an active repellent, was lower when CO was microencapsulated than that in the absence of microencapsulation. Thermogravimetric analysis exhibited that microencapsulation prevented the volatilization of CO. The tensile strength, percentage elongation at break, elastic modulus, and water vapor permeability of the films indicated that microencapsulation did not affect the tensile and moisture barrier properties (P > 0.05). The results of this study suggest that effective films for the prevention of Indian meal moth invasion can be produced by the microencapsulation of CO using a large-scale film production system. Low-density polyethylene-laminated polypropylene films printed with ink incorporating microencapsulated cinnamon oil using a large-scale film production system effectively repelled Indian meal moth larvae. Without altering the tensile and moisture barrier properties of the film, microencapsulation resulted in the release of an active repellent for extended periods with a high thermal stability of cinnamon oil, enabling commercial film production at high temperatures. This anti-insect film system may have applications to other food-packaging films that use the same ink-printing platform. © 2018 Institute of Food Technologists®.

Australian Film Studies.

Science.gov (United States)

Breen, Myles P.

Although Australia had a vigorous film industry in the silent film era, it was stifled in the 1930s when United States and British interests bought up the Australian distribution channels and closed down the indigenous industry. However, the industry and film study have undergone a renaissance since the advent of the Labor government in 1972,…

Radiochromic film dosimetry

International Nuclear Information System (INIS)

Xu Zhiyong

2002-01-01

Radiochromic film dosimetry was developed to measure ionization irradiation dose for industry and medicine. At this time, there are no comprehensive guideline on the medical application, calibration method and densitometer system for medicine. The review gives update on Radiochromic film dosimetry used for medicine, including principles, film model and material, characteristics, calibration method, scanning densitometer system and medical application

P-type CuxS thin films: Integration in a thin film transistor structure

International Nuclear Information System (INIS)

Nunes de Carvalho, C.; Parreira, P.; Lavareda, G.; Brogueira, P.; Amaral, A.

2013-01-01

Cu x S thin films, 80 nm thick, are deposited by vacuum thermal evaporation of sulfur-rich powder mixture, Cu 2 S:S (50:50 wt.%) with no intentional heating of the substrate. The process of deposition occurs at very low deposition rates (0.1–0.3 nm/s) to avoid the formation of Cu or S-rich films. The evolution of Cu x S films surface properties (morphology/roughness) under post deposition mild annealing in air at 270 °C and their integration in a thin film transistor (TFT) are the main objectives of this study. Accordingly, Scanning Electron Microscopy studies show Cu x S films with different surface morphologies, depending on the post deposition annealing conditions. For the shortest annealing time, the Cu x S films look to be constructed of grains with large dimension at the surface (approximately 100 nm) and consequently, irregular shape. For the longest annealing time, films with a fine-grained surface are found, with some randomly distributed large particles bound to this fine-grained surface. Atomic Force Microscopy results indicate an increase of the root-mean-square roughness of Cu x S surface with annealing time, from 13.6 up to 37.4 nm, for 255 and 345 s, respectively. The preliminary integration of Cu x S films in a TFT bottom-gate type structure allowed the study of the feasibility and compatibility of this material with the remaining stages of a TFT fabrication as well as the determination of the p-type characteristic of the Cu x S material. - Highlights: • Surface properties of annealed Cu x S films. • Variation of conductivity with annealing temperatures of Cu x S films. • Application of evaporated Cu x S films in a thin film transistor (TFT) structure. • Determination of Cu x S p-type characteristic from TFT behaviour

Thin film processes II

CERN Document Server

Kern, Werner

1991-01-01

This sequel to the 1978 classic, Thin Film Processes, gives a clear, practical exposition of important thin film deposition and etching processes that have not yet been adequately reviewed. It discusses selected processes in tutorial overviews with implementation guide lines and an introduction to the literature. Though edited to stand alone, when taken together, Thin Film Processes II and its predecessor present a thorough grounding in modern thin film techniques.Key Features* Provides an all-new sequel to the 1978 classic, Thin Film Processes* Introduces new topics, and sever

Film Music. Factfile No. 8.

Science.gov (United States)

Elsas, Diana, Ed.; And Others

Organizations listed here with descriptive information include film music clubs and music guilds and associations. These are followed by a representative list of schools offering film music and/or film sound courses. Sources are listed for soundtrack recordings, sound effects/production music, films on film music, and oral history programs. The…

Film boiling heat transfer and vapour film collapse for various geometries

International Nuclear Information System (INIS)

Jouhara, H.I.; Axcell, B.P.

2005-01-01

Full text of publication follows: Film boiling heat transfer has application to the safe operation of water-cooled nuclear reactors under fault conditions and it has been studied using nickel-plated copper specimens in transient and steady state experiments. In the transient tests the specimens were held in a water flow; in the steady state investigation a specimen was mounted in an essentially quiescent pool of water. The transient investigation was conducted on two spheres with different diameters, two cylindrical specimens of different lengths in parallel flow, a short cylinder in cross flow and two flat plates with different lengths. The heat transfer coefficient, vapour film thickness (which was estimated from the heat transfer coefficient) and heat flux followed a similar behaviour with changing experimental conditions for all specimens studied. The heat transfer coefficient increased and the vapour film thickness and heat flux decreased as the specimen temperature decreased. As the water subcooling increased the heat transfer coefficient and the heat flux increased while the vapour film thickness decreased. The water velocity was found to have little influence on the film boiling heat transfer results except for the short cylinder in cross flow. The sphere diameter was found to affect the heat transfer results; the heat transfer coefficient and the heat flux were larger, for the larger sphere. No significant effect of the cylinder length on the heat transfer data was observed. However, the heat transfer coefficient was higher (and the average vapour film thinner) for the longer plate than for the shorter plate. Three vapour/liquid interface types were observed namely: 'smooth', 'rippled' and 'turbulent' depending largely on specimen and water temperatures. For all specimens, the maximum heat transfer coefficient, minimum heat flux and minimum film boiling temperature, occurring just before vapour film collapse, were found to increase as the water subcooling

Antikken på film

DEFF Research Database (Denmark)

Krasilnikoff, Jens

2012-01-01

Review af forskning om den græsk-romerske oldtid på film. Dertil en skitse til videre arbejde med antikken på film ud fra et historiefagligt og kulturhistorisk udgangspunkt.......Review af forskning om den græsk-romerske oldtid på film. Dertil en skitse til videre arbejde med antikken på film ud fra et historiefagligt og kulturhistorisk udgangspunkt....

Lars von Triers film

DEFF Research Database (Denmark)

Nielsen, Lisbeth Overgaard

2007-01-01

Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse.......Afhandlingen undersøger Lars von Triers filmæstetik, som den kommer til udtryk i spillefilmene fra perioden 1984-2007. Afhandlingen analyserer de enkelte films stil, virkningsstrategi og betydningsdannelse....

Film sheet cassette

International Nuclear Information System (INIS)

1981-01-01

A novel film sheet cassette is described for handling CAT photographic films under daylight conditions and facilitating their imaging. A detailed description of the design and operation of the cassette is given together with appropriate illustrations. The resulting cassette is a low-cost unit which is easily constructed and yet provides a sure light-tight seal for the interior contents of the cassette. The individual resilient fingers on the light-trap permit the ready removal of the slide plate for taking pictures. The stippled, non-electrostatic surface of the pressure plate ensures an air layer and free slidability of the film for removal and withdrawal of the film sheet. The advantage of the daylight system is that a darkroom need not be used for inserting and removing the film in and out of the cassette resulting in a considerable time saving. (U.K.)

Thin films for precision optics

International Nuclear Information System (INIS)

Araujo, J.F.; Maurici, N.; Castro, J.C. de

1983-01-01

The technology of producing dielectric and/or metallic thin films for high precision optical components is discussed. Computer programs were developed in order to calculate and register, graphically, reflectance and transmittance spectra of multi-layer films. The technology of vacuum evaporation of several materials was implemented in our thin-films laboratory; various films for optics were then developed. The possibility of first calculate film characteristics and then produce the film is of great advantage since it reduces the time required to produce a new type of film and also reduces the cost of the project. (C.L.B.) [pt

Thin-film photovoltaic technology

Energy Technology Data Exchange (ETDEWEB)

Bhattacharya, R.N. [National Renewable Energy Laboratory, Golden, CO (United States)

2010-07-01

The high material and processing costs associated with single-crystal and polycrystalline silicon wafers that are commonly used in photovoltaic cells render these modules expensive. This presentation described thin-film solar cell technology as a promising alternative to silicon solar cell technology. Cadmium telluride (CdTe) thin films along with copper, indium, gallium, and selenium (CIGS) thin films have become the leaders in this field. Their large optical absorption coefficient can be attributed to a direct energy gap that allows the use of thin layers (1-2 {mu}m) of active material. The efficiency of thin-film solar cell devices based on CIGS is 20 per cent, compared to 16.7 per cent for thin-film solar cell devices based on CdTe. IBM recently reported an efficiency of 9.7 per cent for a new type of inorganic thin-film solar cell based on a Cu{sub 2}ZnSn(S, Se){sub 4} compound. The efficiency of an organic thin-film solar cell is 7.9 per cent. This presentation included a graph of PV device efficiencies and discussed technological advances in non-vacuum deposited, CIGS-based thin-film solar cells. 1 fig.

Film selection in medical radiology

International Nuclear Information System (INIS)

Bor, Dogan

1988-01-01

Importing of medical imaging films is the responsibility of Turkish Red Croscend, but some institutions have currently started to import their own films. Because of the different resources in individual departments throughout Turkey, a general purpose medical film is imported by Turkish Red Croscend. This kind of film has the advantage to tolerate some technical faults related to the exposure, dark room and processing conditions and still reveals the necessary image quality. In addition to general purpose film, many companies produce special used films which improve some film characteristics in order to have a better image. The initial results of a project already started by Turkish Atomic Energy Authority showed that some other technical reasons prevent obtaining films with optimum quality. The film is the last step of diagnostic procedure and not only gives necessary clinical information, but also visualizes all the problems related to the lock of the calibration of X-ray system and dark room processing conditions. Because of these reasons, many people hold the film responsible for every technical problem. During the selection of the best film among the different companies, institutions have to fulfill some prerequisites at the beginning and than evaluate the quantitative results obtained from measurements according to their clinical purposes. It is the subject of this paper to show how to use film parameter as a comparison to different types of films measured with light sensitometry method. The dark room and processing problems which adversely effect the results are also given. The requirements for the best film selection both for general and special purposes are also evaluated. The extent of this paper is limited only to films using radiology and does not cover the types used in other imaging areas

Religion og film

DEFF Research Database (Denmark)

Hvithamar, Annika; Eskjær, Mikkel Fugl

2007-01-01

Artiklen søger at stipulere en ramme for analyse af religion og film. Dels ved at række ud over den blotte konstatering af tilstedeværelse af religiøse elementer i film, dels ved at anslå en række temaer, der kan anvendes til analyse af sådanne film (individualisering, (de-)sekularisering, banal...

High-quality AlN films grown on chemical vapor-deposited graphene films

Directory of Open Access Journals (Sweden)

Chen Bin-Hao

2016-01-01

Full Text Available We report the growth of high-quality AlN films on graphene. The graphene films were synthesized by CVD and then transferred onto silicon substrates. Epitaxial aluminum nitride films were deposited by DC magnetron sputtering on both graphene as an intermediate layer and silicon as a substrate. The structural characteristics of the AlN films and graphene were investigated. Highly c-axis-oriented AlN crystal structures are investigated based on the XRDpatterns observations.

"Kuleshov on Film": A Spectator-Centered Film Theory.

Science.gov (United States)

Curran, Trisha

This paper describes some of the theories of cinematography of Soviet film theorist and filmmaker Lev Kuleshov. It points out that for him, film was communication portraying people's activities emanating from the environment. It explains that he was especially interested in audience response, particularly that of the proletariat, and that he felt…

Radiochromic film dosimetry. Considerations on precision and accuracy for EBT2 and EBT3 type films

Energy Technology Data Exchange (ETDEWEB)

Dreindl, Ralf [Medical Univ. of Vienna/Vienna General Hospital (Austria). Dept. of Radiooncology; EBG MedAustron GmbH, Wiener Neustadt (Austria); Georg, Dietmar; Stock, Markus [Medical Univ. of Vienna/Vienna General Hospital (Austria). Dept. of Radiooncology; Medical Univ. of Vienna (Austria). Christian Doppler Laboratory for Medical Radiation Research for Radiation Oncology

2014-09-01

Gafchromic {sup registered} EBT2 film is a widely used dosimetric tool for quality assurance in radiation therapy. In 2012 EBT3 was presented as a replacement for EBT2 films. The symmetric structure of EBT3 films to reduce face-up/down dependency as well as the inclusion of a matte film surface to frustrate Newton Ring artifacts present the most prominent improvements of EBT3 films. The aim of this study was to investigate the characteristics of EBT3 films, to benchmark the films against the known EBT2-features and to evaluate the dosimetric behavior over a time period greater than 6 months. All films were irradiated to clinical photon beams (6MV, 10MV and 18MV) on an Elekta Synergy Linac equipped with a Beam Modulator MLC in solid water phantom slabs. Film digitalization was done with a flatbed transparency scanner (Type Epson Expression 1680 Pro). MATLAB {sup registered} was used for further statistical calculations and image processing. The investigations on post-irradiation darkening, film orientation, film uniformity and energy dependency resulted in negligible differences between EBT2 and EBT3 film. A minimal improvement in face-up/down dependence was found for EBT3. The matte film surface of EBT3 films turned out to be a practical feature as Newton rings could be eliminated completely. Considering long-term behavior (> 6 months) a shift of the calibration curve for EBT2 and EBT3 films due to changes in the dynamic response of the active component was observed. In conclusion, the new EBT3 film yields comparable results to its predecessor EBT2. The general advantages of radiochromic film dosimeters are completed by high film homogeneity, low energy dependence for the observed energy range and a minimized face-up/down dependence. EBT2 dosimetry-protocols can also be used for EBT3 films, but the inclusion of periodical recalibration-interval (e.g. once a quarter) is recommended for protocols of both film generations. (orig.)

Radiochromic film dosimetry: considerations on precision and accuracy for EBT2 and EBT3 type films.

Science.gov (United States)

Dreindl, Ralf; Georg, Dietmar; Stock, Markus

2014-05-01

Gafchromic® EBT2 film is a widely used dosimetric tool for quality assurance in radiation therapy. In 2012 EBT3 was presented as a replacement for EBT2 films. The symmetric structure of EBT3 films to reduce face-up/down dependency as well as the inclusion of a matte film surface to frustrate Newton Ring artifacts present the most prominent improvements of EBT3 films. The aim of this study was to investigate the characteristics of EBT3 films, to benchmark the films against the known EBT2-features and to evaluate the dosimetric behavior over a time period greater than 6 months. All films were irradiated to clinical photon beams (6 MV, 10 MV and 18 MV) on an Elekta Synergy Linac equipped with a Beam Modulator MLC in solid water phantom slabs. Film digitalization was done with a flatbed transparency scanner (Type Epson Expression 1680 Pro). MATLAB® was used for further statistical calculations and image processing. The investigations on post-irradiation darkening, film orientation, film uniformity and energy dependency resulted in negligible differences between EBT2 and EBT3 film. A minimal improvement in face-up/down dependence was found for EBT3. The matte film surface of EBT3 films turned out to be a practical feature as Newton rings could be eliminated completely. Considering long-term behavior (> 6 months) a shift of the calibration curve for EBT2 and EBT3 films due to changes in the dynamic response of the active component was observed. In conclusion, the new EBT3 film yields comparable results to its predecessor EBT2. The general advantages of radiochromic film dosimeters are completed by high film homogeneity, low energy dependence for the observed energy range and a minimized face-up/down dependence. EBT2 dosimetry-protocols can also be used for EBT3 films, but the inclusion of periodical recalibration-interval (e.g. once a quarter) is recommended for protocols of both film generations. Copyright © 2013. Published by Elsevier GmbH.

Radiochromic film dosimetry. Considerations on precision and accuracy for EBT2 and EBT3 type films

International Nuclear Information System (INIS)

Dreindl, Ralf; Georg, Dietmar; Stock, Markus; Medical Univ. of Vienna

2014-01-01

Gafchromic registered EBT2 film is a widely used dosimetric tool for quality assurance in radiation therapy. In 2012 EBT3 was presented as a replacement for EBT2 films. The symmetric structure of EBT3 films to reduce face-up/down dependency as well as the inclusion of a matte film surface to frustrate Newton Ring artifacts present the most prominent improvements of EBT3 films. The aim of this study was to investigate the characteristics of EBT3 films, to benchmark the films against the known EBT2-features and to evaluate the dosimetric behavior over a time period greater than 6 months. All films were irradiated to clinical photon beams (6MV, 10MV and 18MV) on an Elekta Synergy Linac equipped with a Beam Modulator MLC in solid water phantom slabs. Film digitalization was done with a flatbed transparency scanner (Type Epson Expression 1680 Pro). MATLAB registered was used for further statistical calculations and image processing. The investigations on post-irradiation darkening, film orientation, film uniformity and energy dependency resulted in negligible differences between EBT2 and EBT3 film. A minimal improvement in face-up/down dependence was found for EBT3. The matte film surface of EBT3 films turned out to be a practical feature as Newton rings could be eliminated completely. Considering long-term behavior (> 6 months) a shift of the calibration curve for EBT2 and EBT3 films due to changes in the dynamic response of the active component was observed. In conclusion, the new EBT3 film yields comparable results to its predecessor EBT2. The general advantages of radiochromic film dosimeters are completed by high film homogeneity, low energy dependence for the observed energy range and a minimized face-up/down dependence. EBT2 dosimetry-protocols can also be used for EBT3 films, but the inclusion of periodical recalibration-interval (e.g. once a quarter) is recommended for protocols of both film generations. (orig.)

[Oral films as perspective dosage form].

Science.gov (United States)

Walicová, Veronika; Gajdziok, Jan

Oral films, namely buccal mucoadhesive films and orodispersible films represent innovative formulations for administration of a wide range of drugs. Oral films show many advantageous properties and are intended for systemic drug delivery or for local treatment of the oral mucosa. In both cases, the film represents a thin layer, which could be intended to adhere to the oral mucosa by means of mucoadhesion; or to rapid dissolution and subsequent swallowing without the need of liquid intake, in the case of orodispersible films. Main constitutive excipients are film-forming polymers, which must in the case of mucoadhesive forms remain on the mucosa within the required time interval. Oral films are currently available on the pharmaceutical market and could compete with conventional oral dosage forms in the future. oral cavity oral films buccal mucoadhesive films orodispersible films film-forming polymers.

Newton's second law, radiation reaction and type II Einstein-Maxwell fields

International Nuclear Information System (INIS)

Newman, Ezra T

2011-01-01

Considering perturbations of the Reissner-Nordstroem metric while keeping the perturbations in the class of type II Einstein-Maxwell metrics, we perform a spherical harmonic expansion of all the variables up to the quadrupole term. This leads to rather surprising results. Referring to the source of the metric as a type II particle (analogous to referring to a Schwarzschild-Reissner-Nordstroem or Kerr-Newman particle), we see immediately that the Bondi momentum of the particle takes the classical form of mass times velocity plus an electromagnetic radiation reaction term, while the Bondi mass loss equation becomes the classical gravitational and electromagnetic (electric and magnetic) dipole and quadrupole radiation. The Bondi momentum loss equation turns into Newton's second law of motion containing the Abraham-Lorentz-Dirac radiation reaction force plus a momentum recoil (rocket) force, while the reality condition on the Bondi mass aspect yields the conservation of angular momentum. Two things must be pointed out: (1) these results, (equations of motion, etc) take place, not in the spacetime of the type II metric but in an auxiliary space referred to as H-space, whose physical meaning is rather obscure and (2) this analysis of the type II field equations is a very special case of a similar analysis of the general asymptotically flat Einstein-Maxwell equations. Although the final results are similar (though not the same), the analysis uses different equations (specifically, the type II field equations) and is vastly simpler than the general case. Without a great deal of the technical structures needed in the general case, one can see rather easily where the basic results reside in the type II field equations. (paper)

Evolution of optical constants of silicon dioxide on silicon from ultrathin films to thick films

Energy Technology Data Exchange (ETDEWEB)

Cai Qingyuan; Zheng Yuxiang; Mao Penghui; Zhang Rongjun; Zhang Dongxu; Liu Minghui; Chen Liangyao, E-mail: yxzheng@fudan.edu.c [Key Laboratory of Micro and Nano Photonic Structures, Ministry of Education, Department of Optical Science and Engineering, Fudan University, Shanghai 200433 (China)

2010-11-10

A series of SiO{sub 2} films with thickness range 1-600 nm have been deposited on crystal silicon (c-Si) substrates by electron beam evaporation (EBE) method. Variable-angle spectroscopic ellipsometry (VASE) in combination with a two-film model (ambient-oxide-interlayer substrate) was used to determine the optical constants and thicknesses of the investigated films. The refractive indices of SiO{sub 2} films thicker than 60 nm are close to those of bulk SiO{sub 2}. For the thin films deposited at the rate of {approx}1.0 nm s{sup -1}, the refractive indices increase with decreasing thickness from {approx}60 to {approx}10 nm and then drop sharply with decreasing thickness below {approx}10 nm. However, for thin films deposited at the rates of {approx}0.4 and {approx}0.2 nm s{sup -1}, the refractive indices monotonically increase with decreasing thickness below 60 nm. The optical constants of the ultrathin film depend on the morphology of the film, the stress exerted on the film, as well as the stoichiometry of the oxide film.

Evolution of optical constants of silicon dioxide on silicon from ultrathin films to thick films

International Nuclear Information System (INIS)

Cai Qingyuan; Zheng Yuxiang; Mao Penghui; Zhang Rongjun; Zhang Dongxu; Liu Minghui; Chen Liangyao

2010-01-01

A series of SiO 2 films with thickness range 1-600 nm have been deposited on crystal silicon (c-Si) substrates by electron beam evaporation (EBE) method. Variable-angle spectroscopic ellipsometry (VASE) in combination with a two-film model (ambient-oxide-interlayer substrate) was used to determine the optical constants and thicknesses of the investigated films. The refractive indices of SiO 2 films thicker than 60 nm are close to those of bulk SiO 2 . For the thin films deposited at the rate of ∼1.0 nm s -1 , the refractive indices increase with decreasing thickness from ∼60 to ∼10 nm and then drop sharply with decreasing thickness below ∼10 nm. However, for thin films deposited at the rates of ∼0.4 and ∼0.2 nm s -1 , the refractive indices monotonically increase with decreasing thickness below 60 nm. The optical constants of the ultrathin film depend on the morphology of the film, the stress exerted on the film, as well as the stoichiometry of the oxide film.

Fabrication of nitrogen-containing diamond-like carbon film by filtered arc deposition as conductive hard-coating film

Science.gov (United States)

Iijima, Yushi; Harigai, Toru; Isono, Ryo; Imai, Takahiro; Suda, Yoshiyuki; Takikawa, Hirofumi; Kamiya, Masao; Taki, Makoto; Hasegawa, Yushi; Tsuji, Nobuhiro; Kaneko, Satoru; Kunitsugu, Shinsuke; Habuchi, Hitoe; Kiyohara, Shuji; Ito, Mikio; Yick, Sam; Bendavid, Avi; Martin, Phil

2018-01-01

Diamond-like carbon (DLC) films, which are amorphous carbon films, have been used as hard-coating films for protecting the surface of mechanical parts. Nitrogen-containing DLC (N-DLC) films are expected as conductive hard-coating materials. N-DLC films are expected in applications such as protective films for contact pins, which are used in the electrical check process of integrated circuit chips. In this study, N-DLC films are prepared using the T-shaped filtered arc deposition (T-FAD) method, and film properties are investigated. Film hardness and film density decreased when the N content increased in the films because the number of graphite structures in the DLC film increased as the N content increased. These trends are similar to the results of a previous study. The electrical resistivity of N-DLC films changed from 0.26 to 8.8 Ω cm with a change in the nanoindentation hardness from 17 to 27 GPa. The N-DLC films fabricated by the T-FAD method showed high mechanical hardness and low electrical resistivity.

Ferroelectric ultrathin perovskite films

Science.gov (United States)

Rappe, Andrew M; Kolpak, Alexie Michelle

2013-12-10

Disclosed herein are perovskite ferroelectric thin-film. Also disclosed are methods of controlling the properties of ferroelectric thin films. These films can be used in a variety materials and devices, such as catalysts and storage media, respectively.

Important considerations for radiochromic film dosimetry with flatbed CCD scanners and EBT GAFCHROMIC[reg] film

International Nuclear Information System (INIS)

Lynch, Bart D.; Kozelka, Jakub; Ranade, Manisha K.; Li, Jonathan G.; Simon, William E.; Dempsey, James F.

2006-01-01

In this study, we present three significant artifacts that have the potential to negatively impact the accuracy and precision of film dosimetry measurements made using GAFCHROMIC[reg] EBT radiochromic film when read out with CCD flatbed scanners. Films were scanned using three commonly employed instruments: a Macbeth TD932 spot densitometer, an Epson Expression 1680 CCD array scanner, and a Microtek ScanMaker i900 CCD array scanner. For the two scanners we assessed the variation in optical density (OD) of GAFCHROMIC EBT film with scanning bed position, angular rotation of the film with respect to the scan line direction, and temperature inside the scanner due to repeated scanning. Scanning uniform radiochromic films demonstrated a distinct bowing effect in profiles in the direction of the CCD array with a nonuniformity of up to 17%. Profiles along a direction orthogonal to the CCD array demonstrated a 7% variation. A strong angular dependence was found in measurements made with the flatbed scanners; the effect could not be reproduced with the spot densitometer. An IMRT quality assurance film was scanned twice rotating the film 90 deg. between the scans. For films scanned on the Epson scanner, up to 12% variation was observed in unirradiated EBT films rotated between 0 deg. and 90 deg. , which decreased to approximately 8% for EBT films irradiated to 300 cGy. Variations of up to 80% were observed for films scanned with the Microtek scanner. The scanners were found to significantly increase the film temperature with repeated scanning. Film temperature between 18 and 33 deg. C caused OD changes of approximately 7%. Considering these effects, we recommend adherence to a strict scanning protocol that includes: maintaining the orientation of films scanned on flatbed scanners, limiting scanning to the central portion of the scanner bed, and limiting the number of consecutive scans to minimize changes in OD caused by film heating

Characteristics of ITO films with oxygen plasma treatment for thin film solar cell applications

Energy Technology Data Exchange (ETDEWEB)

Park, Yong Seob [Department of Photoelectronics Information, Chosun College of Science and Technology, Gwangju (Korea, Republic of); Kim, Eungkwon [Digital Broadcasting Examination, Korean Intellectual Property Office, Daejeon, Suwon 440-746 (Korea, Republic of); Hong, Byungyou [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong, 300, Jangan-gu, Suwon 440-746 (Korea, Republic of); Lee, Jaehyoeng, E-mail: jaehyeong@skku.edu [School of Electronic and Electrical Engineering, Sungkyunkwan University, Cheoncheon-dong, 300, Jangan-gu, Suwon 440-746 (Korea, Republic of)

2013-12-15

Graphical abstract: The effect of O{sub 2} plasma treatment on the surface and the work function of ITO films. - Highlights: • ITO films were prepared on the glass substrate by RF magnetron sputtering method. • Effects of O{sub 2} plasma treatment on the properties of ITO films were investigated. • The work function of ITO film was changed from 4.67 to 5.66 eV by plasma treatment. - Abstract: The influence of oxygen plasma treatment on the electro-optical and structural properties of indium-tin-oxide films deposited by radio frequency magnetron sputtering method were investigated. The films were exposed at different O{sub 2} plasma powers and for various durations by using the plasma enhanced chemical vapor deposition (PECVD) system. The resistivity of the ITO films was almost constant, regardless of the plasma treatment conditions. Although the optical transmittance of ITO films was little changed by the plasma power, the prolonged treatment slightly increased the transmittance. The work function of ITO film was changed from 4.67 eV to 5.66 eV at the plasma treatment conditions of 300 W and 60 min.

Host thin films incorporating nanoparticles

Science.gov (United States)

Qureshi, Uzma

The focus of this research project was the investigation of the functional properties of thin films that incorporate a secondary nanoparticulate phase. In particular to assess if the secondary nanoparticulate material enhanced a functional property of the coating on glass. In order to achieve this, new thin film deposition methods were developed, namely use of nanopowder precursors, an aerosol assisted transport technique and an aerosol into atmospheric pressure chemical vapour deposition system. Aerosol assisted chemical vapour deposition (AACVD) was used to deposit 8 series of thin films on glass. Five different nanoparticles silver, gold, ceria, tungsten oxide and zinc oxide were tested and shown to successfully deposit thin films incorporating nanoparticles within a host matrix. Silver nanoparticles were synthesised and doped within a titania film by AACVD. This improved solar control properties. A unique aerosol assisted chemical vapour deposition (AACVD) into atmospheric pressure chemical vapour deposition (APCVD) system was used to deposit films of Au nanoparticles and thin films of gold nanoparticles incorporated within a host titania matrix. Incorporation of high refractive index contrast metal oxide particles within a host film altered the film colour. The key goal was to test the potential of nanopowder forms and transfer the suspended nanopowder via an aerosol to a substrate in order to deposit a thin film. Discrete tungsten oxide nanoparticles or ceria nanoparticles within a titanium dioxide thin film enhanced the self-cleaning and photo-induced super-hydrophilicity. The nanopowder precursor study was extended by deposition of zinc oxide thin films incorporating Au nanoparticles and also ZnO films deposited from a ZnO nanopowder precursor. Incorporation of Au nanoparticles within a VO: host matrix improved the thermochromic response, optical and colour properties. Composite VC/TiC and Au nanoparticle/V02/Ti02 thin films displayed three useful

Film models for transport phenomena with fog formation: The classical film model

NARCIS (Netherlands)

Brouwers, Jos; Chesters, A.K.

1992-01-01

In the present analysis the classical film model (or film theory) is reviewed and extended. First, on the basis of a thorough analysis, the governing equations of diffusion, energy and momentum of a stagnant film are derived and solved. Subsequently, the well-known correction factors for the effect

Film models for transport phenomena with fog formation: the classical film model

NARCIS (Netherlands)

Brouwers, H.J.H.; Chesters, A.K.

1992-01-01

In the present analysis the classical film model (or film theory) is reviewed and extended. First, on the basis of a thorough analysis, the governing equations of diffusion, energy and momentum of a stagnant film are derived and solved. Subsequently, the well-known correction factors for the effect

Family Porn - the zodiac-film

DEFF Research Database (Denmark)

Thorsen, Christian Isak

2015-01-01

This article addresses the highly popular Danish Zodiac films, a series of six films made between 1973 and 1978. What was extraordinary about the films was their combination of traditional popular comedy and hard-core porn. Analysing the films� combination of comedy and pornography from a histori......This article addresses the highly popular Danish Zodiac films, a series of six films made between 1973 and 1978. What was extraordinary about the films was their combination of traditional popular comedy and hard-core porn. Analysing the films� combination of comedy and pornography from...

Film studies the basics

CERN Document Server

Villarejo, Amy

2013-01-01

Film Studies: The Basics　is a compelling guide to the study of cinema in all its forms. This second edition has been thoroughly revised and updated to take account of recent scholarship, the latest developments in the industry and the explosive impact of new technologies. Core topics covered include: 　 The history, technology and art of cinema Theories of stardom, genre and film-making The movie industry from Hollywood to Bollywood Who does what on a film set 　 Complete with film stills, end-of-chapter summaries and a substantial glossary,　Film Studies: The Basics　is the ideal introduction to those new to the study of cinema.

Pyrolyzed thin film carbon

Science.gov (United States)

Tai, Yu-Chong (Inventor); Liger, Matthieu (Inventor); Harder, Theodore (Inventor); Konishi, Satoshi (Inventor); Miserendino, Scott (Inventor)

2010-01-01

A method of making carbon thin films comprises depositing a catalyst on a substrate, depositing a hydrocarbon in contact with the catalyst and pyrolyzing the hydrocarbon. A method of controlling a carbon thin film density comprises etching a cavity into a substrate, depositing a hydrocarbon into the cavity, and pyrolyzing the hydrocarbon while in the cavity to form a carbon thin film. Controlling a carbon thin film density is achieved by changing the volume of the cavity. Methods of making carbon containing patterned structures are also provided. Carbon thin films and carbon containing patterned structures can be used in NEMS, MEMS, liquid chromatography, and sensor devices.

Ellipsometry of anodic film growth

Energy Technology Data Exchange (ETDEWEB)

Smith, C.G.

1978-08-01

An automated computer interpretation of ellisometer measurements of anodic film growth was developed. Continuous mass and charge balances were used to utilize more fully the time dependence of the ellipsometer data and the current and potential measurements. A multiple-film model was used to characterize the growth of films which proceeds via a dissolution--precipitation mechanism; the model also applies to film growth by adsorption and nucleation mechanisms. The characteristic parameters for film growth describe homogeneous and heterogeneous crystallization rates, film porosities and degree of hydration, and the supersaturation of ionic species in the electrolyte. Additional descriptions which may be chosen are patchwise film formation, nonstoichiometry of the anodic film, and statistical variations in the size and orientation of secondary crystals. Theories were developed to describe the optical effects of these processes. An automatic, self-compensating ellipsometer was used to study the growth in alkaline solution of anodic films on silver, cadmium, and zinc. Mass-transport conditions included stagnant electrolyte and forced convection in a flow channel. Multiple films were needed to characterize the optical properties of these films. Anodic films grew from an electrolyte supersatuated in the solution-phase dissolution product. The degree of supersaturation depended on transport conditions and had a major effect on the structure of the film. Anodic reaction rates were limited by the transport of charge carriers through a primary surface layer. The primary layers on silver, zinc, and cadmium all appeared to be nonstoichiometric, containing excess metal. Diffusion coefficients, transference numbers, and the free energy of adsorption of zinc oxide were derived from ellipsometer measurements. 97 figures, 13 tables, 198 references.

Personnel photographic film dosimetry

International Nuclear Information System (INIS)

Keirim-Markus, I.B.

1981-01-01

Technology of personnel photographic film dosimetry (PPD) based on the photographic effect of ionizing radiation is described briefly. Kinds of roentgen films used in PPD method are enumerated, compositions of a developer and fixing agents for these films are given [ru

Quantitative film radiography

International Nuclear Information System (INIS)

Devine, G.; Dobie, D.; Fugina, J.; Hernandez, J.; Logan, C.; Mohr, P.; Moss, R.; Schumacher, B.; Updike, E.; Weirup, D.

1991-01-01

We have developed a system of quantitative radiography in order to produce quantitative images displaying homogeneity of parts. The materials that we characterize are synthetic composites and may contain important subtle density variations not discernible by examining a raw film x-radiograph. In order to quantitatively interpret film radiographs, it is necessary to digitize, interpret, and display the images. Our integrated system of quantitative radiography displays accurate, high-resolution pseudo-color images in units of density. We characterize approximately 10,000 parts per year in hundreds of different configurations and compositions with this system. This report discusses: the method; film processor monitoring and control; verifying film and processor performance; and correction of scatter effects

More than films and dragon awards

DEFF Research Database (Denmark)

Redvall, Eva Novrup

2012-01-01

This article discusses how the largest film festival in the Nordic countries, the Göteborg International Film Festival (GIFF), is much more than a setting for bringing quality films to local audiences.With retrospectives, an extensive programme of seminars and master classes, a film lab for upcom......This article discusses how the largest film festival in the Nordic countries, the Göteborg International Film Festival (GIFF), is much more than a setting for bringing quality films to local audiences.With retrospectives, an extensive programme of seminars and master classes, a film lab...

Radiographic film orientation in radiotherapy dosimetry

International Nuclear Information System (INIS)

Suchowerska, N.; Davison, A.; Drew, J.; Metcalfe, P.

1996-01-01

Since the discovery of x-rays, film has been used as a detection medium for radiation. More recently radiographic film has become established as a practical tool for the measurement of dose distribution in radiotherapy. The accuracy and reproducibility of film dosimetry depends on photon energy, processing conditions and film plane orientation. The relationship between photon energy, processing conditions and film dosimetry accuracy has been studied. The role of film plane orientation is still controversial. The current work aims to clarify the effects film plane orientation has on film dosimetry. Poster 205. (author)

Oxide ultrathin films science and technology

CERN Document Server

Pacchioni, Gianfranco

2012-01-01

A wealth of information in one accessible book. Written by international experts from multidisciplinary fields, this in-depth exploration of oxide ultrathin films covers all aspects of these systems, starting with preparation and characterization, and going on to geometrical and electronic structure, as well as applications in current and future systems and devices. From the Contents: Synthesis and Preparation of Oxide Ultrathin Films Characterization Tools of Oxide Ultrathin Films Ordered Oxide Nanostructures on Metal Surfaces Unusual Properties of Oxides and Other Insulators in the Ultrathin Limit Silica and High-K Dielectrics Thin Films in Microelectronics Oxide Passive Films and Corrosion Protection Oxide Films as Catalytic Materials and as Models of Real Catalysts Oxide Films in Spintronics Oxide Ultrathin Films in Solid Oxide Fuel Cells Transparent Conducting and Chromogenic Oxide Films as Solar Energy Materials Oxide Ultrathin Films in Sensor Applications Ferroelectricity in Ultrathin Film Capacitors T...

Film beyond boundaries: film, migrant narratives and other media

Directory of Open Access Journals (Sweden)

Anelise Reich Corseuil

2006-04-01

Full Text Available The articles here presented are representative of the debates about the various transformational aspects of film studies, fostering the discussion about the transformations and interactions between national and international narrative forms, the interrelations between film and literature, and film with other media. The critical perspectives here presented range from an emphasis on cultural materialism, dialogism, reception theory, deconstructionism, narrative studies to film aesthetics or film genre, and can be grouped in three major interrelated areas of film studies: adaptation studies, representation and aesthetics, and film and other media. All of them enable a critical perspective as regards the fluidity of the boundaries separating film from other media, such as literature, television, DVDs, and video games, as newer narrative forms that are incorporated by film, and the transformations in terms of aesthetics and forms of representation in contemporary film and media (the transgeneric nature of film, the interrelations between national and international cinemas, and the demands for a broader perception of the overwhelming mediations of the image in our contemporary society. Moreover, the articles are inserted within recent critical debates on adaptation, digital media and national and transnational cinema (Naremore, Sobchack, Druckery and Williams. All articles combine important theoretical concerns with the analysis of specific films. Robert Stam's “Teoria e Prática da Adaptação: da Fidelidade à Intertextualidade” (“Theory and the practice of adaptation: from fidelity to intertextuality” offers a rich perspective on the issue of adaptation in its relationship with critical theory. He analyses the changing critical views on adaptation, which go from the priority given to the canonic literary text, as an origin, to a more fluid, intertextual and dialogical approach to film adaptation. Drawing from Bakhtin's concept of dialogism

Shanghai and Globalization through the Lens of Film Noir: Lou Ye’s 2000 Film, Suzhou River

Directory of Open Access Journals (Sweden)

Hongwei Lu

2010-10-01

Full Text Available In the 1990s, the film industry in China decentralized with the bankruptcy of the state-owned studio system. Privatized independent film companies took over where the government had left off and a more independent film culture emerged. Although obstacles such as political censorship, financial pressures, and Hollywood infiltration were still in the way for Chinese filmmakers, privatization of the film industry was under way. As a result of this process, new film productions of controversial subject matter came into being. In 1998 one of China’s first independent film production companies—Dream Factory—was founded. Dream Factory’s first production, in association with Berlin-based German producer Philippe Bober, was the 'Suzhou River, 'directed by its founder Lou Ye'.'1 The 2000 film, though winning prizes at international film festivals such as the Rotterdam Film Festival and the Paris Film Festival, has been banned by the Chinese government since its production.

thin films

Indian Academy of Sciences (India)

microscopy (SEM) studies, respectively. The Fourier transform ... Thin films; chemical synthesis; hydrous tin oxide; FTIR; electrical properties. 1. Introduction ... dehydrogenation of organic compounds (Hattori et al 1987). .... SEM images of (a) bare stainless steel and (b) SnO2:H2O thin film on stainless steel substrate at a ...

Into films

DEFF Research Database (Denmark)

Tan, Ed S.; Doicaru, Miruna M.; Hakemulder, Frank

2017-01-01

Most film viewers know the experience of being deeply absorbed in the story of a popular film. It seems that at such moments they lose awareness of watching a movie. And yet it is highly unlikely that they completely ignore the fact that they watch a narrative and technological construction. Perh...

Demagnetization in photomagnetic films

Energy Technology Data Exchange (ETDEWEB)

Pajerowski, Daniel M., E-mail: daniel@pajerowski.com [NIST Center for Neutron Research, Gaithersburg, Maryland 20899 (United States); Hallock, Scott J. [NIST Center for Neutron Research, Gaithersburg, Maryland 20899 (United States); Winston Churchill High School, Potomac, Maryland 20854 (United States)

2012-05-15

We present a model for demagnetization in photomagnetic films, and investigate different regimes for the magnetizing process using finite element analysis. It is found that the demagnetizing factor may depend strongly upon the high-spin fraction of the film, and the specifics of the dependence are dictated by the microscopic morphology of the photomagnetic domains. This picture allows for facile interpretation of existing data on photomagnetic films, and can even explain an observed photoinduced decrease in low-field magnetization concurrent with increase in high-spin fraction. As a whole, these results reiterate the need to consider demagnetizing effects in photomagnetic films. - Highlights: Black-Right-Pointing-Pointer Finite element methods are used to examine demagnetization in photomagnetic films. Black-Right-Pointing-Pointer Under the right conditions, photomagnetic films may show a photoinduced decrease. Black-Right-Pointing-Pointer Demagnetization in photomagnets will be important to consider in possible devices.

Student film clinches top prize in film competition

OpenAIRE

Elliott, Jean

2006-01-01

Virginia Tech senior Tim Leaton earned the top prize in the widely acclaimed Film Your Issue (FYI) competition - an eight-week paid internship at Disney Studios in Los Angeles. Leaton's one-minute film, "Orphans in Africa," won the nationwide contest, an initiative to encourage young Americans, age 18 to 26, to engage in social issues and add their voices to the public dialogue.

Heritage film set : the protection and care of historic filming locations

OpenAIRE

Flynn, Clare

2016-01-01

Taking part in filming can offer considerable benefits to the historic properties involved, including increased visitor numbers, public awareness, and funding that can facilitate the ongoing care and conservation of the featured properties. However, film shoots are also intrusive events that introduce serious threats to the historic built fabric of these properties. This dissertation will investigate how the conservation integrity of heritage sites and properties is maintained when film shoot...

Film Censorship Policy During Park Chung Hee’s Military Regime (1960–1979 and Hostess Films

Directory of Open Access Journals (Sweden)

Molly Hyo Kim

2018-04-01

Full Text Available Park Chung-hee’s military government (1960-1979 purportedly used film censorship to distract the public from political consciousness by controlling political materials in films while condoning censorship control on sexual content. As a result, the production of soft-core adult films soared and became popular among Korean audiences. One such film genre that thrived during this period, so-called hostess films (prostitute films, is worthy of attention for the films’ foregrounding issues of class, poverty and other social issues that the state censorship board heavily regulated. In viewing such dynamics between state censorship and film, this article aims to unravel the questions of how the state was willing to turn a blind eye to the explicit sexualization of women in hostess films when film censorship was at its peak and why the social and political aspects of this group of films about female sexual workers were not considered socially relevant by the censorship board, through scrutinizing the interplay between Park’s state censorship and hostess films. Furthermore, it offers an analysis of a hostess film, The Rose that Swallowed Thorn (Cheong, 1979, as a case study to show how it strategically orchestrates visual and thematic elements to circumvent censorship enforcement.

Organic Photovoltaic Devices Based on Oriented n-Type Molecular Films Deposited on Oriented Polythiophene Films.

Science.gov (United States)

Mizokuro, Toshiko; Tanigaki, Nobutaka; Miyadera, Tetsuhiko; Shibata, Yousei; Koganezawa, Tomoyuki

2018-04-01

The molecular orientation of π-conjugated molecules has been reported to significantly affect the performance of organic photovoltaic devices (OPVs) based on molecular films. Hence, the control of molecular orientation is a key issue toward the improvement of OPV performance. In this research, oriented thin films of an n-type molecule, 3,4,9,10-Perylenetetracarboxylic Bisbenzimida-zole (PTCBI), were formed by deposition on in-plane oriented polythiophene (PT) films. Orientation of the PTCBI films was evaluated by polarized UV-vis spectroscopy and 2D-Grazing incidence X-ray diffraction. Results indicated that PTCBI molecules on PT film exhibit nearly edge-on and in-plane orientation (with molecular long axis along the substrate), whereas PTCBI molecules without PT film exhibit neither. OPVs composed of PTCBI molecular film with and without PT were fabricated and evaluated for correlation of orientation with performance. The OPVs composed of PTCBI film with PT showed higher power conversion efficiency (PCE) than that of film without PT. The experiment indicated that in-plane orientation of PTCBI molecules absorbs incident light more efficiently, leading to increase in PCE.

Radiochromic film dosimetry

International Nuclear Information System (INIS)

Soares, Christopher G.

2006-01-01

The object of this paper is to give a new user some practical information on the use of radiochromic films for medical applications. While various aspects of radiochromic film dosimetry for medical applications have been covered in some detail in several other excellent review articles which have appeared in the last few years [Niroomand-Rad, A., Blackwell, C.R., Coursey, B.M., Gall, K.P., McLaughlin, W.L., Meigooni, A.S., Nath, R., Rodgers, J.E., Soares, C.G., 1998. Radiochromic dosimetry: recommendations of the AAPM Radiation Therapy Committee Task Group 55. Med. Phys. 25, 2093-2115; Dempsey, J.F., Low, D.A., Mutic, S., Markman, J., Kirov, A.S., Nussbaum, G.H., Williamson, J.F., 2000. Validation of a precision radiochromic film dosimetry system for quantitative two-dimensional imaging of acute exposure dose distributions. Med. Phys. 27, 2462-2475; Butson, M.J., Yu, P.K.N., Cheung, T., Metcalfe, P., 2003. Radiochromic film for medical radiation dosimetry. Mater. Sci. Eng. R41, 61-120], it is the intent of the present author to present material from a more user-oriented and practical standpoint. That is, how the films work will be stressed much less than how to make the films work well. The strength of radiochromic films is most evident in applications where there is a very high dose gradient and relatively high absorbed dose rates. These conditions are associated with brachytherapy applications, measurement of small fields, and at the edges (penumbra regions) of larger fields

US/Russian Joint Film Test

Science.gov (United States)

Slater, Richard

1996-01-01

A joint U.S./Russian film test was conducted during MIR Mission 18 to evaluate the effects of radiation on photographic film during long-duration space flights. Two duplicate sets of film were flown on this MIR mission: one set was processed and evaluated by the NASA/JSC Photographic Laboratory, and the other by the RKK Energia's Photographic Laboratory in Moscow. This preliminary report includes only the results of the JSC evaluation (excluding the SN-10 film which was not available for evaluation at the time this report was written). The final report will include an evaluation by JSC of the SN-10 film and an evaluation of the test data by the RKK Energia. ISC's evaluation of the test data showed the positive film flown was damaged very little when exposed to approximately 8 rads of radiation. Two of the three negative films were significantly damaged and the third film was damaged only moderately.

Film Censorship Policy During Park Chung Hee’s Military Regime (1960–1979) and Hostess Films

OpenAIRE

Molly Hyo Kim

2018-01-01

Park Chung-hee’s military government (1960-1979) purportedly used film censorship to distract the public from political consciousness by controlling political materials in films while condoning censorship control on sexual content. As a result, the production of soft-core adult films soared and became popular among Korean audiences. One such film genre that thrived during this period, so-called hostess films (prostitute films), is worthy of attention for the films’ foregrounding issues of cla...

High-throughput characterization of film thickness in thin film materials libraries by digital holographic microscopy

International Nuclear Information System (INIS)

Lai Yiuwai; Hofmann, Martin R; Ludwig, Alfred; Krause, Michael; Savan, Alan; Thienhaus, Sigurd; Koukourakis, Nektarios

2011-01-01

A high-throughput characterization technique based on digital holography for mapping film thickness in thin-film materials libraries was developed. Digital holographic microscopy is used for fully automatic measurements of the thickness of patterned films with nanometer resolution. The method has several significant advantages over conventional stylus profilometry: it is contactless and fast, substrate bending is compensated, and the experimental setup is simple. Patterned films prepared by different combinatorial thin-film approaches were characterized to investigate and demonstrate this method. The results show that this technique is valuable for the quick, reliable and high-throughput determination of the film thickness distribution in combinatorial materials research. Importantly, it can also be applied to thin films that have been structured by shadow masking.

High-throughput characterization of film thickness in thin film materials libraries by digital holographic microscopy.

Science.gov (United States)

Lai, Yiu Wai; Krause, Michael; Savan, Alan; Thienhaus, Sigurd; Koukourakis, Nektarios; Hofmann, Martin R; Ludwig, Alfred

2011-10-01

A high-throughput characterization technique based on digital holography for mapping film thickness in thin-film materials libraries was developed. Digital holographic microscopy is used for fully automatic measurements of the thickness of patterned films with nanometer resolution. The method has several significant advantages over conventional stylus profilometry: it is contactless and fast, substrate bending is compensated, and the experimental setup is simple. Patterned films prepared by different combinatorial thin-film approaches were characterized to investigate and demonstrate this method. The results show that this technique is valuable for the quick, reliable and high-throughput determination of the film thickness distribution in combinatorial materials research. Importantly, it can also be applied to thin films that have been structured by shadow masking.

Thin Cu film resistivity using four probe techniques: Effect of film thickness and geometrical shapes

Science.gov (United States)

Choudhary, Sumita; Narula, Rahul; Gangopadhyay, Subhashis

2018-05-01

Precise measurement of electrical sheet resistance and resistivity of metallic thin Cu films may play a significant role in temperature sensing by means of resistivity changes which can further act as a safety measure of various electronic devices during their operation. Four point probes resistivity measurement is a useful approach as it successfully excludes the contact resistance between the probes and film surface of the sample. Although, the resistivity of bulk samples at a particular temperature mostly depends on its materialistic property, however, it may significantly differ in the case of thin films, where the shape and thickness of the sample can significantly influence on it. Depending on the ratio of the film thickness to probe spacing, samples are usually classified in two segments such as (i) thick films or (ii) thin films. Accordingly, the geometric correction factors G can be related to the sample resistivity r, which has been calculated here for thin Cu films of thickness up to few 100 nm. In this study, various rectangular shapes of thin Cu films have been used to determine the shape induced geometric correction factors G. An expressions for G have been obtained as a function of film thickness t versus the probe spacing s. Using these expressions, the correction factors have been plotted separately for each cases as a function of (a) film thickness for fixed linear probe spacing and (b) probe distance from the edge of the film surface for particular thickness. Finally, we compare the experimental results of thin Cu films of various rectangular geometries with the theoretical reported results.

Film, Neuroaesthetics, and Empathy

DEFF Research Database (Denmark)

Grodal, Torben Kragh; Kramer, Mette

2014-01-01

The article analyzes the link between film viewing and human 'ultra-sociality' (Boyd and Richardson 1998), describing how empathy is supported by mirror resonances but also modified by appraisal mechanisms and how emotions are communicated, It further discusses how 'attainment' to film builds...... on mother-child communication and also how film genres of attachment use such attainment, especially by means of close-ups of human faces and shot-reverse shots. Finally it deals with how films boost development of cognitive and emotional intelligence...

Atomic-Layer-Deposition of Indium Oxide Nano-films for Thin-Film Transistors.

Science.gov (United States)

Ma, Qian; Zheng, He-Mei; Shao, Yan; Zhu, Bao; Liu, Wen-Jun; Ding, Shi-Jin; Zhang, David Wei

2018-01-09

Atomic-layer-deposition (ALD) of In 2 O 3 nano-films has been investigated using cyclopentadienyl indium (InCp) and hydrogen peroxide (H 2 O 2 ) as precursors. The In 2 O 3 films can be deposited preferentially at relatively low temperatures of 160-200 °C, exhibiting a stable growth rate of 1.4-1.5 Å/cycle. The surface roughness of the deposited film increases gradually with deposition temperature, which is attributed to the enhanced crystallization of the film at a higher deposition temperature. As the deposition temperature increases from 150 to 200 °C, the optical band gap (E g ) of the deposited film rises from 3.42 to 3.75 eV. In addition, with the increase of deposition temperature, the atomic ratio of In to O in the as-deposited film gradually shifts towards that in the stoichiometric In 2 O 3 , and the carbon content also reduces by degrees. For 200 °C deposition temperature, the deposited film exhibits an In:O ratio of 1:1.36 and no carbon incorporation. Further, high-performance In 2 O 3 thin-film transistors with an Al 2 O 3 gate dielectric were achieved by post-annealing in air at 300 °C for appropriate time, demonstrating a field-effect mobility of 7.8 cm 2 /V⋅s, a subthreshold swing of 0.32 V/dec, and an on/off current ratio of 10 7 . This was ascribed to passivation of oxygen vacancies in the device channel.

Underwater 3D filming

Directory of Open Access Journals (Sweden)

Roberto Rinaldi

2014-12-01

Full Text Available After an experimental phase of many years, 3D filming is now effective and successful. Improvements are still possible, but the film industry achieved memorable success on 3D movie’s box offices due to the overall quality of its products. Special environments such as space (“Gravity” and the underwater realm look perfect to be reproduced in 3D. “Filming in space” was possible in “Gravity” using special effects and computer graphic. The underwater realm is still difficult to be handled. Underwater filming in 3D was not that easy and effective as filming in 2D, since not long ago. After almost 3 years of research, a French, Austrian and Italian team realized a perfect tool to film underwater, in 3D, without any constrains. This allows filmmakers to bring the audience deep inside an environment where they most probably will never have the chance to be.

Film-thickness dependence of structure formation in ultra-thin polymer blend films

CERN Document Server

Gutmann, J S; Stamm, M

2002-01-01

We investigated the film-thickness dependence of structure formation in ultra-thin polymer blend films prepared from solution. As a model system we used binary blends of statistical poly(styrene-co-p-bromostyrene) copolymers of different degrees of bromination. Ultra-thin-film samples differing in miscibility and film thickness were prepared via spin coating of common toluene solutions onto silicon (100) substrates. The resulting morphologies were investigated with scanning force microscopy, reflectometry and grazing-incidence scattering techniques using both X-rays and neutrons in order to obtain a picture of the sample structure at and below the sample surface. (orig.)

Effect of micro-patterned fluorine-doped tin oxide films on electrochromic properties of Prussian blue films

International Nuclear Information System (INIS)

Lee, Kyuha; Kim, A-Young; Park, Ji Hun; Jung, Hun-Gi; Choi, Wonchang; Lee, Hwa Young; Lee, Joong Kee

2014-01-01

Graphical abstract: - Highlights: • PB-based ECD employed micro-patterned FTO electrode was fabricated. • Effect of interface morphology on electrochromic characteristics was examined. • Electrochromic properties were enhanced by employing a patterned interface. - Abstract: The effect of interface morphology on electrochromic characteristics was examined for an electrochromic device (ECD). Micro-patterned fluorine-doped tin oxide (FTO) films were fabricated using a photolithography process. Prussian blue (PB) films were then deposited on the patterned FTO films. The surface areas of both PB films and FTO films were increased by patterning. ECDs were assembled using patterned PB/FTO films as the electrochromic electrode, bare FTO films as the counter electrode, and an electrolyte containing LiClO 4 salt. The increased effective surface area of the patterned PB/FTO electrode boosted the mobility of ions at the interphase between the electrolyte and PB electrode, and the electron transfer between PB films and FTO films. As a result, electrochromic properties such as transmittance and response time were significantly improved by employing the patterned FTO films as the transparent conductive oxide layer of the electrochromic electrode

[Spectroscopic study on film formation mechanism and structure of composite silanes-V-Zr passive film].

Science.gov (United States)

Wang, Lei; Liu, Chang-sheng; Shi, Lei; An, Cheng-qiang

2015-02-01

A composite silanes-V-Zr passive film was overlayed on hot-dip galvanized steel. Attenuated total reflection Fourier transformed infrared spectroscopy (ATR-FTIR), X-ray photoelectron spectrometer (XPS) and radio frequency glow discharge optical emission spectrometry (rf-GD-OES) were used to characterize the molecular structure of the silanes-V-Zr passive film. The mechanism of film formation was discussed: The results show that the silane molecules are crosslinked as the main film former and inorganic inhibitor is even distributed in the film. The fitting peak of 100.7 eV in XPS single Si2p energy range spectra of the composite silanes-V-Zr passive film and the widening and strengthening of the Si--O infrared absorption peak at 1100 cm(-1) indicate that the silanes were adsorbed on the surface of zinc with chemical bond of Si--O--Zn, and the silane molecules were connected with each other by bond of Si--O--Si. Two characteristic absorption peaks of amide at 1650 and 1560 cm(-1) appear in the infrared spectroscopy of the composite silanes-V-Zr passive film, and a characteristic absorption peak of epoxy groups at 910 cm(-1) disappears in the infrared spectroscopy of the passive film. The results indicate that gamma-APT can be prepared through nucleophilic ring-opening of ethylene oxide in gamma-GPT molecule to form C--N covalent bonds. The rf-GD-OES results indicate that there is a oxygen enriched layer in 0.3 microm depth of the composite silanes-V-Zr passive film. Moreover, ZrF4, ZrO2 and some inorganic matter obtained by the reaction during the forming processof the composite silanes-V-Zr passive film are distributed evenly throughout the film. According to the film composition, the physical processes and chemical reactions during the film forming process were studied by using ATR-FTIR. Based on this, the film forming mechanism was proposed.

Fire resistant films for aircraft applications

Science.gov (United States)

Kourtides, D. A.

1983-01-01

Alternative sandwich panel decorative films were investigated as replacements for the polyvinyl fluoride currently used in aircraft interiors. Candidate films were studied for flammability, smoke emission, toxic gas emission, flame spread, and suitability as a printing surface for the decorative acrylic ink system. Several of the candidate films tested were flame modified polyvinyl fluoride, polyvinylidene fluoride, polyimide, polyamide, polysulfone, polyphenylsulfone, polyethersulfone, polybenzimidazole, polycarbonate, polyparabanic acid, polyphosphazene, polyetheretherketon, and polyester. The films were evaluated as pure films only, films silk-screened with an acrylic ink, and films adhered to a phenolic fiberglass substrate. Films which exhibited the highest fire resistant properties included PEEK polyetheretherketon, Aramid polyamide, and ISO-BPE polyester.

Predicting film genres with implicit ideals

Directory of Open Access Journals (Sweden)

Andrew McGregor Olney

2013-01-01

Full Text Available We present a new approach to defining film genre based on implicit ideals. When viewers rate the likability of a film, they indirectly express their ideal of what a film should be. Across six studies we investigate the category structure that emerges from likability ratings and the category structure that emerges from the features of film. We further compare these data-driven category structures with human annotated film genres. We conclude that film genres are structured more around ideals than around features of film. This finding lends experimental support to the notion that film genres are set of shifting, fuzzy, and highly contextualized psychological categories.

Predicting film genres with implicit ideals.

Science.gov (United States)

Olney, Andrew McGregor

2012-01-01

We present a new approach to defining film genre based on implicit ideals. When viewers rate the likability of a film, they indirectly express their ideal of what a film should be. Across six studies we investigate the category structure that emerges from likability ratings and the category structure that emerges from the features of film. We further compare these data-driven category structures with human annotated film genres. We conclude that film genres are structured more around ideals than around features of film. This finding lends experimental support to the notion that film genres are set of shifting, fuzzy, and highly contextualized psychological categories.

Thin-film solar cells

International Nuclear Information System (INIS)

Aberle, Armin G.

2009-01-01

The rapid progress that is being made with inorganic thin-film photovoltaic (PV) technologies, both in the laboratory and in industry, is reviewed. While amorphous silicon based PV modules have been around for more than 20 years, recent industrial developments include the first polycrystalline silicon thin-film solar cells on glass and the first tandem solar cells based on stacks of amorphous and microcrystalline silicon films ('micromorph cells'). Significant thin-film PV production levels are also being set up for cadmium telluride and copper indium diselenide.

Film Scriptwriting: A Practical Manual.

Science.gov (United States)

Swain, Dwight V.

Dealing with both documentary and feature films, this book is a guide to using particular tools and procedures in developing ideas and concepts for writing film scripts. Part one deals with the factual, or documentary, film and discusses the proposal outline, film treatment, sequence outline, shooting script, and narration writing. Part two…

Fabrication and Film Qualification of Sr Modified Pb(Ca) TiO3 Thin Films

International Nuclear Information System (INIS)

Naw Hla Myat San; Khin Aye Thwe; Than Than Win; Yin Maung Maung; Ko Ko Kyaw Soe

2011-12-01

Strontium and calcium - modified lead titanate (Pb0.7 Ca0.15 Sr0.15 ) TiO3 (PCST)thin films were prepared by using spin coating technique. Phase transition of PCST was interpreted by means of Er-T characteristics. Process temperature dependence on micro-structure of PCST film was studied. Charge conduction mechanism of PCST thin film was also investigated for film qualification.

Professor Camillo Negro's Neuropathological Films.

Science.gov (United States)

Chiò, Adriano; Gianetto, Claudia; Dagna, Stella

2016-01-01

Camillo Negro, Professor in Neurology at the University of Torino, was a pioneer of scientific film. From 1906 to 1908, with the help of his assistant Giuseppe Roasenda and in collaboration with Roberto Omegna, one of the most experienced cinematographers in Italy, he filmed some of his patients for scientific and educational purposes. During the war years, he continued his scientific film project at the Military Hospital in Torino, filming shell-shocked soldiers. In autumn 2011, the Museo Nazionale del Cinema, in partnership with the Faculty of Neurosciences of the University of Torino, presented a new critical edition of the neuropathological films directed by Negro. The Museum's collection also includes 16 mm footage probably filmed in 1930 by Doctor Fedele Negro, Camillo's son. One of these films is devoted to celebrating the effects of the so-called "Bulgarian cure" on Parkinson's disease.

Process for forming thin film, heat treatment process of thin film sheet, and heat treatment apparatus therefor

International Nuclear Information System (INIS)

Watanabe, S.

1984-01-01

The invention provides a process for forming a magnetic thin film on a base film, a heat treatment process of a thin film sheet consisting of the base film and the magnetic thin film, and an apparatus for performing heat treatment of the thin film sheet. Tension applied to the thin film sheet is substantially equal to that applied to the base film when the magnetic thin film is formed thereon. Then, the thin film sheet is treated with heat. The thin film sheet is heated with a given temperature gradient to a reactive temperature at which heat shrinkage occurs, while the tension is being applied thereto. Thereafter, the thin film sheet to which the tension is still applied is cooled with substantially the same temperature gradient as applied in heating. The heat treatment apparatus has a film driving unit including a supply reel, a take-up reel, a drive source and guide rollers; a heating unit including heating plates, heater blocks and a temperature controller for heating the sheet to the reactive temperature; and a heat insulating unit including a thermostat and another temperature controller for maintaining the sheet at the nonreactive temperature which is slightly lower than the reactive temperature

Use of buffy coat thick films in detecting malaria parasites in patients with negative conventional thick films.

Science.gov (United States)

Duangdee, Chatnapa; Tangpukdee, Noppadon; Krudsood, Srivicha; Wilairatana, Polrat

2012-04-01

To determine the frequency of malaria parasite detection from the buffy coat blood films by using capillary tube in falciparum malaria patients with negative conventional thick films. Thirty six uncomplicated falciparum malaria patients confirmed by conventional thick and thin films were included in the study. The patients were treated with artemisinin combination therapy at Hospital for Tropical Diseases, Bangkok, Thailand for 28 day. Fingerpricks for conventional blood films were conducted every 6 hours until negative parasitemia, then daily fingerpricks for parasite checks were conducted until the patients were discharged from hospital. Blood samples were also concurrently collected in 3 heparinized capillary tubes at the same time of fingerpricks for conventional blood films when the prior parasitemia was negative on thin films and parasitemia was lower than 50 parasites/200 white blood cells by thick film. The first negative conventional thick films were compared with buffy coat thick films for parasite identification. Out of 36 patients with thick films showing negative for asexual forms of parasites, buffy coat films could detect remaining 10 patients (27.8%) with asexual forms of Plasmodium falciparum. The study shows that buffy coat thick films are useful and can detect malarial parasites in 27.8% of patients whose conventional thick films show negative parasitemia.

Heteroepitaxial growth of SiC films by carbonization of polyimide Langmuir-Blodgett films on Si

Directory of Open Access Journals (Sweden)

Goloudina S.I.

2017-01-01

Full Text Available High quality single crystal SiC films were prepared by carbonization of polyimide Langmuir-Blodgett films on Si substrate. The films formed after annealing of the polyimide films at 1000°C, 1100°C, 1200°C were studied by Fourier transform-infrared (FTIR spectroscopy, X-ray diffraction (XRD, Raman spectroscopy, transmission electon microscopy (TEM, transmission electron diffraction (TED, and scanning electron microscopy (SEM. XRD study and HRTEM cross-section revealed that the crystalline SiC film begins to grow on Si (111 substrate at 1000°C. According to the HRTEM cross-section image five planes in 3C-SiC (111 film are aligned with four Si(111 planes at the SiC/Si interface. It was shown the SiC films (35 nm grown on Si(111 at 1200°C have mainly cubic 3C-SiC structure with a little presence of hexagonal polytypes. Only 3C-SiC films (30 nm were formed on Si (100 substrate at the same temperature. It was shown the SiC films (30-35 nm are able to cover the voids in Si substrate with size up to 10 μm.

Representasi Perempuan Dalam Film (Analisis Semiotika Representasi Perempuan Dalam Film “Fifty Shades of Grey”)

OpenAIRE

Aviomeita, Friska

2016-01-01

This study entitled "Representation of Women In Film ( Roland Barthes Semiotics Analysis In the film Fifty Shades of Grey ) " . The purpose of this study to find out how women are represented in the film " Fifty Shades of Grey " by denotation , connotation and myths . Film has always influenced and shaped the public based on the contents of the message behind it. Messages or values contained in the film may affect the audience. In this study, researchers used several theorie...

Films from the Couch: Film Theory and Psychoanalysis

Directory of Open Access Journals (Sweden)

Pedro Sangro Colón

2008-10-01

Full Text Available   Different disciplines have contributed to weaving a theory of psychoanalysis in the cinema: ranging from the loans from anthropology and experimental psychology, to proposals belonging to the specific sphere of film theory, such as Filmology, Text Analysis or Feminist Theory in films. In all cases, the aim is to establish a relationship between the significance structure that governs the cinema and psychology, so as to confirm that the cinema’s system of representation is modelled on our unconscious psychological apparatus, as was explained by the psychoanalyst Jacques Lacan, among others. The arrival of psychoanalysis in film thought forges the idea that considers the cinema as an auxiliary psychological device capable of making us subjects and submerging us in the emotions in play in the conflicts proposed by any audiovisual story.

Predictors of Horror Film Attendance and Appeal: An Analysis of the Audience for Frightening Films.

Science.gov (United States)

Tamborini, Ron; Stiff, James

1987-01-01

Analyzes the appeal of horror films. Develops a model that finds that important factors in the horror film's appeal are the audience's desire to experience the satisfying resolutions and to see the destruction usually found in these films and the sensation-seeking personality traits of audience members for these films. (NKA)

Texture control and growth mechanism of WSe{sub 2} film prepared by rapid selenization of W film

Energy Technology Data Exchange (ETDEWEB)

Li, Hongchao [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Chongyi Zhangyuan Tungsten Industry Corporation Limited, Ganzhou 341300 (China); Gao, Di; Li, Kun; Pang, Mengde; Xie, Senlin [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Liu, Rutie, E-mail: llrrtt@csu.edu.cn [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China); Zou, Jianpeng [State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083 (China)

2017-02-01

Highlights: • We present a highly efficient method for preparing WSe{sub 2} film by rapid selenization. • The W film phase composition has little effect on WSe{sub 2} film orientation. • W film density is a critical factor that influences the WSe{sub 2} orientation. • A growth model was proposed for two kinds of WSe{sub 2} film textures. - Abstract: The tungsten diselenide (WSe{sub 2}) films with different orientation present unique properties suitable for specific applications, such as WSe{sub 2} with a C-axis⊥substrate for optoelectronics and WSe{sub 2} with a C-axis // substrate for electrocatalysts. Orientation control of WSe{sub 2} is essential for realizing the practical applications. In this letter, a WSe{sub 2} film has been prepared via rapid selenization of a magnetron-sputtered tungsten (W) film. The influence of the magnetron-sputtered W film on WSe{sub 2} film growth was studied systematically. Scanning electron microscopy, X-ray diffractometry and high-resolution transmission electron microscopy were used to evaluate the morphology, microstructure and phase composition of the W and WSe{sub 2} films. The substrate temperature has a significant effect on the W film phase composition, but little effect on the WSe{sub 2} film orientation. The WSe{sub 2} orientation can be controlled by changing the W film microstructure. A dense W film that is deposited at low pressure is conducive to the formation of WSe{sub 2} with a C-axis⊥substrate, whereas a porous W film deposited at high pressure favors the formation of WSe{sub 2} with a C-axis // substrate. A growth model for the WSe{sub 2} film with different texture has been proposed based on the experimental results. The direction of selenium (Se) vapor diffusion differs at the top and side surfaces. This is a key factor for the preparation of anisotropic WSe{sub 2} films. Highly oriented WSe{sub 2} films with a C-axis⊥substrate grow from the dense W film deposited at low pressure because Se vapor

Properties of Chitosan-Laminated Collagen Film

Directory of Open Access Journals (Sweden)

Vera Lazić

2012-01-01

Full Text Available The objective of this study is to determine physical, mechanical and barrier properties of chitosan-laminated collagen film. Commercial collagen film, which is used for making collagen casings for dry fermented sausage production, was laminated with chitosan film layer in order to improve the collagen film barrier properties. Different volumes of oregano essential oil per 100 mL of filmogenic solution were added to chitosan film layer: 0, 0.2, 0.4, 0.6 and 0.8 mL to optimize water vapour barrier properties. Chitosan layer with 0.6 or 0.8 % of oregano essential oil lowered the water vapour transmission rate to (1.85±0.10·10–6 and (1.78±0.03·10–6 g/(m2·s·Pa respectively, compared to collagen film ((2.51±0.05·10–6 g/(m2·s·Pa. However, chitosan-laminated collagen film did not show improved mechanical properties compared to the collagen one. Tensile strength decreased from (54.0±3.8 MPa of the uncoated collagen film to (36.3±4.0 MPa when the film was laminated with 0.8 % oregano essential oil chitosan layer. Elongation at break values of laminated films did not differ from those of collagen film ((18.4±2.7 %. Oxygen barrier properties were considerably improved by lamination. Oxygen permeability of collagen film was (1806.8±628.0·10–14 cm3/(m·s·Pa and values of laminated films were below 35·10–14 cm3/(m·s·Pa. Regarding film appearance and colour, lamination with chitosan reduced lightness (L and yellowness (+b of collagen film, while film redness (+a increased. These changes were not visible to the naked eye.

Handbook of thin film technology

CERN Document Server

Frey, Hartmut

2015-01-01

“Handbook of Thin Film Technology” covers all aspects of coatings preparation, characterization and applications. Different deposition techniques based on vacuum and plasma processes are presented. Methods of surface and thin film analysis including coating thickness, structural, optical, electrical, mechanical and magnetic properties of films are detailed described. The several applications of thin coatings and a special chapter focusing on nanoparticle-based films can be found in this handbook. A complete reference for students and professionals interested in the science and technology of thin films.

[Psychopathology and film: a valuable interaction?].

Science.gov (United States)

van Duppen, Z; Summa, M; Fuchs, T

2015-01-01

Film or film fragments are often used in psychopathology education. However, so far there have been very few articles that have discussed the benefits and limitations of using films to explain or illustrate psychopathology. Although numerous films involves psychopathology in varying degrees, it is not clear how we can use films for psychopathology education. To examine the advantages, limitations and possible methods of using film as a means of increasing our knowledge and understanding of psychiatric illnesses. We discuss five examples that illustrate the interaction of film and psychopathology. On the one hand we explain how the psychopathological concepts are used in each film and on the other hand we explain which aspects of each film are valuable aids for teaching psychopathology. The use of film makes it possible to introduce the following topics in psychopathological teaching programme: holistic psychiatric reasoning, phenomenology and the subjective experience, the recognition of psychopathological prototypes and the importance of context. There is undoubtedly an analogy between the method we have chosen for teaching psychopathology with the help of films and the holistic approach of the psychiatrist and his or her team. We believe psychopathology education can benefit from films and we would recommend our colleagues to use it in this way.

Film dosimetry in conformal radiotherapy

Energy Technology Data Exchange (ETDEWEB)

Danciu, C; Proimos, B S [Patras Univ. (Greece). Dept. of Medical Physics

1995-12-01

Dosimetry, through a film sandwiched in a transverse cross-section of a solid phantom, is a method of choice in Conformal Radiotherapy because: (a) the blackness (density) of the film at each point offers a measure of the total dose received at that point, and (b) the film is easily calibrated by exposing a film strip in the same cross-section, through a stationary field. The film must therefore have the following properties: (a) it must be slow, in order not to be overexposed, even at a therapeutic dose of 200 cGy, and (b) the response of the film (density versus dose curve) must be independent of the photon energy spectrum. A few slow films were compared. It was found that the Kodak X-Omat V for therapy verification was the best choice. To investigate whether the film response was independent of the photon energy, response curves for six depths, starting from the depth of maximum dose to the depth of 25 cm, in solid phantom were derived. The vertical beam was perpendicular to the anterior surface of the phantom, which was at the distance of 100 cm from the source and the field was 15x15 cm at that distance. This procedure was repeated for photon beams emitted by a Cobalt-60 unit, two 6 MV and 15 MV Linear Accelerators, as well as a 45 MV Betatron. For each of those four different beams the film response was the same for all six depths. The results, as shown in the diagrams, are very satisfactory. The response curve under a geometry similar to that actually applied, when the film is irradiated in a transverse cross-section of the phantom, was derived. The horizontal beam was almost parallel (angle of 85) to the plane of the film. The same was repeated with the central ray parallel to the film (angle 90) and at a distance of 1.5 cm from the horizontal film. The field size was again 15x15 at the lateral entrance surface of the beam. The response curves remained the same, as when the beam was perpendicular to the films.

Radiation grafting on natural films

International Nuclear Information System (INIS)

Lacroix, M.; Khan, R.; Senna, M.; Sharmin, N.; Salmieri, S.; Safrany, A.

2014-01-01

Different methods of polymer grafting using gamma irradiation are reported in the present study for the preparation of newly functionalized biodegradable films, and some important properties related to their mechanical and barrier properties are described. Biodegradable films composed of zein and poly(vinyl alcohol) (PVA) were gamma-irradiated in presence of different ratios of acrylic acid (AAc) monomer for compatibilization purpose. Resulting grafted films (zein/PVA-g-AAc) had their puncture strength (PS=37–40 N mm −1 ) and puncture deformation (PD=6.5–9.8 mm) improved for 30% and 50% PVA in blend, with 5% AAc under 20 kGy. Methylcellulose (MC)-based films were irradiated in the presence of 2-hydroxyethyl methacrylate (HEMA) or silane, in order to determine the effect of monomer grafting on the mechanical properties of films. It was found that grafted films (MC-g-HEMA and MC-g-silane) using 35% monomer performed higher mechanical properties with PS values of 282–296 N mm −1 and PD of 5.0–5.5 mm under 10 kGy. Compatibilized polycaprolactone (PCL)/chitosan composites were developed via grafting silane in chitosan films. Resulting trilayer grafted composite film (PCL/chitosan-g-silane/PCL) presented superior tensile strength (TS=22 MPa) via possible improvement of interfacial adhesion (PCL/chitosan) when using 25% silane under 10 kGy. Finally, MC-based films containing crystalline nanocellulose (CNC) as a filling agent were prepared and irradiated in presence of trimethylolpropane trimethacrylate (TMPTMA) as a grafted plasticizer. Grafted films (MC-g-TMPTMA) presented superior mechanical properties with a TS of 47.9 MPa and a tensile modulus (TM) of 1792 MPa, possibly due to high yield formation of radicals to promote TMPTMA grafting during irradiation. The addition of CNC led to an additional improvement of the barrier properties, with a significant 25% reduction of water vapor permeability (WVP) of grafted films. - Highlights: • Irradiation of zein

Engineering Graphene Films from Coal

Science.gov (United States)

Vijapur, Santosh H.

Graphene is a unique material with remarkable properties suitable for a wide array of applications. Chemical vapor deposition (CVD) is a simple technique for synthesis of large area and high quality graphene films on various metal substrates. Among the metal substrates, copper has been shown to be an excellent support for the growth of graphene films. Traditionally, hydrocarbon gases are used for the graphene synthesis via CVD. Unconventional solid carbon sources such as various polymers and food waste have also shown great potential for synthesis of graphene films. Coal is one such carbon enriched and abundantly available unconventional source. Utilization of coal as a carbon source to synthesize large area, transparent, and high quality few-layer graphene films via CVD has been demonstrated in the present work. Hydrocarbon gases are released as products of coal pyrolysis at temperatures ≥400 °C. This study hypothesized that, these hydrocarbon gases act as precursors for the synthesis of graphene films on the copper substrate. Hence, atmospheric pressure CVD and low temperature of 400 °C were utilized initially for the production of graphene films. These conditions were suitable for the formation of amorphous carbon (a-C) films but not crystalline graphene films that were the objective of this work. The synthesized a-C films on the copper substrate were shown to be uniform and transparent with large surface area. The thickness and surface roughness of the a-C films were determined to have typical values of 5 nm and 0.55 nm, respectively. The a-C film has >95 % optical transmittance and sheet resistivity of 0.6 MO sq-1. These values are comparable to other carbon thin films synthesized at higher temperatures. Further, the a-C films were transferred onto any type of substrate such as silicon wafer and titanium foil, and can be utilized for diverse applications. However, crystalline graphene films were not produced by implementing atmospheric pressure CVD and low

Effect of micro-patterned fluorine-doped tin oxide films on electrochromic properties of Prussian blue films

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyuha [Center for Energy Convergence Research, Green City Technology Institute, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Kim, A-Young [Center for Energy Convergence Research, Green City Technology Institute, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Department of Material Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of); Park, Ji Hun; Jung, Hun-Gi; Choi, Wonchang; Lee, Hwa Young [Center for Energy Convergence Research, Green City Technology Institute, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Lee, Joong Kee, E-mail: leejk@kist.re.kr [Center for Energy Convergence Research, Green City Technology Institute, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of)

2014-09-15

Graphical abstract: - Highlights: • PB-based ECD employed micro-patterned FTO electrode was fabricated. • Effect of interface morphology on electrochromic characteristics was examined. • Electrochromic properties were enhanced by employing a patterned interface. - Abstract: The effect of interface morphology on electrochromic characteristics was examined for an electrochromic device (ECD). Micro-patterned fluorine-doped tin oxide (FTO) films were fabricated using a photolithography process. Prussian blue (PB) films were then deposited on the patterned FTO films. The surface areas of both PB films and FTO films were increased by patterning. ECDs were assembled using patterned PB/FTO films as the electrochromic electrode, bare FTO films as the counter electrode, and an electrolyte containing LiClO{sub 4} salt. The increased effective surface area of the patterned PB/FTO electrode boosted the mobility of ions at the interphase between the electrolyte and PB electrode, and the electron transfer between PB films and FTO films. As a result, electrochromic properties such as transmittance and response time were significantly improved by employing the patterned FTO films as the transparent conductive oxide layer of the electrochromic electrode.

One Film, or Many?: The Multiple Texts of the Colonial Korean Film "Volunteer"

Directory of Open Access Journals (Sweden)

Jaekil Seo

2012-12-01

Full Text Available Until recently, studies on films from colonial Korea in the Japanese empire had to rely primarily on secondary texts, such as memoirs, journal and newspaper articles, and film reviews. The recent discovery of original film texts from archives in Japan, China, Russia, and elsewhere and their availability on DVD format, prompted an important turning point in the scholarship. However, juxtaposing these newly released DVD versions with other archival sources exposes significant differences among the existing versions of texts. For instance, a newly discovered script reveals that important segments are missing in the recently released DVD version of the propaganda film "Volunteer." There also exist important discrepancies in the dialogue among the original film script, the actual film version, the synopsis, and the Japanese subtitles. Some of the Korean-language dialogue, which might be interpreted as exhibiting some ambivalence toward Japanese imperial policies, was completely silenced through strategic omissions in the Japanese-language subtitles targeting Japanese audiences. Some Japanese-language translations of the script also exhibit drastic changes from the original Korean-language dialogue. Piecing together such fragmented and fraught linguistic dissonance found in the colonial archives, we can conjecture that viewers from the colony and the metropole of "Volunteer" may have consumed very different versions of the film. This article aims to examine the significance of such dissonance, which has only recently become audible in so-called films of transcolonial coproduction.

Plasma-polymerized SiOx deposition on polymer film surfaces for preparation of oxygen gas barrier polymeric films

International Nuclear Information System (INIS)

Inagaki, N.

2003-01-01

SiOx films were deposited on surfaces of three polymeric films, PET, PP, and Nylon; and their oxygen gas barrier properties were evaluated. To mitigate discrepancies between the deposited SiOx and polymer film, surface modification of polymer films was done, and how the surface modification could contribute to was discussed from the viewpoint of apparent activation energy for the permeation process. The SiOx deposition on the polymer film surfaces led to a large decrease in the oxygen permeation rate. Modification of polymer film surfaces by mans of the TMOS or Si-COOH coupling treatment in prior to the SiOx deposition was effective in decreasing the oxygen permeation rate. The cavity model is proposed as an oxygen permeation process through the SiOx-deposited Nylon film. From the proposed model, controlling the interface between the deposited SiOx film and the polymer film is emphasized to be a key factor to prepare SiOx-deposited polymer films with good oxygen gas barrier properties. (author)

Film Editing Handbook; Technique of 16mm Film Cutting.

Science.gov (United States)

Churchill, Hugh B.

Designed to help the film student with the complexities of 16mm film cutting, this handbook catalogs the mechanical procedures of both picture and sound cutting and supplies step-by-step explanations of these procedures. Because the handbook was organized so that it could be used while working at the cutting bench, common cutting problems and…

Free-standing graphene films prepared via foam film method for great capacitive flexible supercapacitors

Science.gov (United States)

Zhu, Yucan; Ye, Xingke; Tang, Zhonghua; Wan, Zhongquan; Jia, Chunyang

2017-11-01

Recently, graphene films have always attracted attention due to their excellent characteristics in energy storage. In this work, a novel graphene oxide (GO) film with excellent mechanical properties, whose thickness was regulated simply via changing the concentration of the surfactant, was successfully prepared by foam film method. After chemical reduction, the reduced GO (rGO) films have excellent electrical conductivity of ∼172 S cm-1. Moreover, the supercapacitors based on the rGO films exhibit satisfied capacitive performance of ∼56 mF cm-2 at 0.2 mA cm-2 in 6 M KOH aqueous solution. Meanwhile, the flexible all solid state supercapacitors (FSSCs) based on the rGO films also show great volumetric capacitance of ∼2810 mF cm-3 at 12 mA cm-3 (∼1607 mF cm-3 at 613 mA cm-3) with polyvinyl alcohol-KOH gel electrolyte. Besides, after 10000 cycles and continuously bent to 180° for 300 times, the volumetric capacitance of the FSSC remains at 81.4% and 90.4% of its initial capacitance value, respectively. Therefore, the free-standing rGO films prepared via foam film method could be considered as promising electrode materials for high performance flexible supercapacitors.

Quantitative analysis of tear film fluorescence and discomfort during tear film instability and thinning.

Science.gov (United States)

Begley, Carolyn; Simpson, Trefford; Liu, Haixia; Salvo, Eliza; Wu, Ziwei; Bradley, Arthur; Situ, Ping

2013-04-12

The purpose of this study was to test the association between tear film fluorescence changes during tear break-up (TBU) or thinning and the concurrent ocular sensory response. Sixteen subjects kept one eye open as long as possible (MBI), indicated their discomfort level continuously, and rated ocular sensations of irritation, stinging, burning, pricking, and cooling using visual analog scales (VAS). Fluorescence of the tear film was quantified by a pixel-based analysis of the median pixel intensity (PI), TBU, and percentage of dark pixels (DarkPix) over time. A cutoff of 5% TBU was used to divide subjects into either break-up (BU) or minimal break-up (BUmin) groups. Tear film fluorescence decreased (median PI) and the percentage of TBU and DarkPix increased in all trials, with the rate significantly greater in the BU than the BUmin group (Mann-Whitney U test, P film thinning best explains decreasing tear film fluorescence during trials. This was highly correlated with increasing ocular discomfort, suggesting that both tear film thinning and TBU stimulate underlying corneal nerves, although TBU produced more rapid stimulation. Slow increases in tear film hyperosmolarity may cause the gradual increase in discomfort during slow tear film thinning, whereas the sharp increases in discomfort during TBU suggest a more complex stimulus.

FOREIGN LANGUAGE FILMS IN LOUISIANA DEPOSITORIES.

Science.gov (United States)

BABINEAUX, AUDREY

THIS MANUAL IS AN ANNOTATED LIST OF 16-MILLIMETER EDUCATIONAL FOREIGN LANGUAGE FILMS (BOTH LINGUISTIC AND CULTURAL) WHICH WERE PURCHASED WITH STATE AND FEDERAL FUNDS AND PLACED IN LOUISIANA'S NINE FILM LIBRARIES. FILMS ARE ARRANGED ALPHABETICALLY BY LANGUAGES. FILMS IN THE TARGET LANGUAGE ARE LISTED SEPARATELY FROM FILMS WITH ENGLISH NARRATION. A…

Olympic Training Film Profiles. Volume III.

Science.gov (United States)

1971

Approximately 250 instructional films are described in Volume Three (1970-1971) of this review. After an introduction which considers film discussions from the instructor's point of view and offers some ideas for conducting a film showing and ordering the films, profiles of the films are presented grouped under such areas as management…

Nopal cactus film

Science.gov (United States)

Toxqui-López, S.; Olivares-Pérez, A.; Fuentes-Tapia, I.; Conde-Cuatzo, María. G.

2017-03-01

Nopal mucilage potentially has certain properties required for the preparation biofilms which can be used as holographic replication recording medium. In this study, mucilage from nopal was extracted and characterized by its ability to form films under different concentration with polyvinyl alcohol. The transmission holographic diffraction gratings (master) were replicated into nopal films. The results showed good diffraction efficiencies. Mucilage from nopal could represent a good option for the development of films to replication holographic, owing to; its low cost and its compatibility with the environmental.

FEMINIST FILM THEORY

OpenAIRE

Wijaya, Haris

2015-01-01

The developing of film industry has brought us into a complexity of art and business. If the first movie audiences were delighted to see that it was possible to record a moving scene on film; today we debate the desirability behind every movie, rather than just the possibility of capturing an image. Film has already become entertainment tool and communication media with quite powerful effect to influence people at the early 20th century. The problem that happens now is there are not many wome...

Gammel Sherlock Holmes-film fundet - igen

DEFF Research Database (Denmark)

Lauridsen, Palle Schantz

2017-01-01

Om genfunden af en forsvundet Sherlock Holmes-film fra 1911, produceret af Nordisk Films Kompagni......Om genfunden af en forsvundet Sherlock Holmes-film fra 1911, produceret af Nordisk Films Kompagni...

Fiction Film Dialogue vs Documentary Film Dialogue: Genre Peculiarities of Translation

Directory of Open Access Journals (Sweden)

Вера Евгеньевна Горшкова

2016-12-01

Full Text Available The article gives an analysis of the film dialogue translation depending on the genre peculiarities of a spoken word medium, i. e. of a fiction film and of a documentary. The latter is traditionally disregarded by linguists and translators due to an established opinion that it lacks an overt literary aesthetic component. Thus it makes a documentary much easier to translate and its text gets closer to the information text the translation dominant of which is to render its information component. The article analyses an universal character of image-sense applied to different cinematographic genres. This thesis is demonstrated with examples from fiction and documentary film dialogues such as The Artist, Il y a longtemps que je t’aime, Espionne pendant la seconde guerre mondiale translated into French and Russian. It is highlighted that particular verbal components/utterances quite often get especially crucial in the context of the film dialogue increasing its poetic function and creating a complete image-sense. Such lexical units as personal pronouns «ты» and «вы» (you as the 2nd person singular in Russian and the 2nd person plural, respectively have no small share in the above process as their adequate translation contributes to the audience's integral perception of the film as an aesthetic phenomenon. It is postulated that a documentary that deals with «the creative elaboration of the reality» has a lot in common with a fiction film in the regard of its compliance with the director's intention, the presentation of the sequence of events and their respective interpretation in the film. In this regard the adequate rendering of the image-sense of a documentary is especially vital in the analysis of events separated in time. That supposition can be backed up by a translation project carried out on the material of the film dialogue translation of the documentary «Espionne pendant la seconde guerre mondiale» from French into Russian.

A „Hybrid“ Thin-Film pH Sensor with Integrated Thick-Film Reference

OpenAIRE

Simonis, Anette; Krings, Thomas; Lüth, Hans; Wang, Joseph; Schöning, Michael J.

2001-01-01

A reference electrode fabricated by means of thick-film technique is deposited onto a silicon substrate and combined with a thin-film pH sensor to a “hybrid†chip system. To evaluate the suitability of this combination, first investigations were carried out. The characteristics of the thin-film pH sensor were studied towards the thick-film Ag/AgCl reference electrode. Measurements were performed in the capacitance/voltage (C/V) and constant capacitance (Concap) mode for different pH ...

Soap Films as 1D waveguides

Directory of Open Access Journals (Sweden)

Emile Olivier

2014-01-01

Full Text Available Laser light is injected in a free standing horizontal draining soap film through the glass frame sustaining the film. Two propagation regimes are clearly identified depending on the film thickness. At the beginning of the drainage, the soap film behaves as a multimode-one dimensional optofiuidic waveguide. In particular, we observe that the injected light creates a bottleneck in the film and part of the injected light is refracted leading to whiskers. At the end of the drainage where the film thickness is below 1μm, there is a strong selection among the various possible optical modes in the film, and part of the light is defiected. This leads to a self selection of the mode propagation inside the film.

Thermogravimetric analysis of fuel film evaporation

Institute of Scientific and Technical Information of China (English)

HU Zongjie; LI Liguang; YU Shui

2006-01-01

Thermogravimetric analysis (TGA) was compared with the petrochemical distillation measurement method to better understand the characteristics of fuel film evaporation at different wall tem- peratures. The film evaporation characteristics of 90# gasoline, 93# gasoline and 0# diesel with different initial thicknesses were investigated at different environmental fluxes and heating rates. The influences of heating rate, film thickness and environmental flux on fuel film evaporation for these fuels were found. The results showed that the environmental conditions in TGA were similar to those for fuel films in the internal combustion engines, so data from TGA were suitable for the analysis of fuel film evaporation. TGA could simulate the key influencing factors for fuel film evaporation and could investigate the basic quantificational effect of heating rate and film thickness. To get a rapid and sufficient fuel film evaporation, sufficiently high wall temperature is necessary. Evaporation time decreases at a high heating rate and thin film thickness, and intense gas flow is important to promoting fuel film evaporation. Data from TGA at a heating rate of 100℃/min are fit to analyze the diesel film evaporation during cold-start and warming-up. Due to the tense molecular interactions, the evaporation sequence could not be strictly divided according to the boiling points of each component for multicomponent dissolved mixture during the quick evaporation process, and the heavier components could vaporize before reaching their boiling points. The 0# diesel film would fully evaporate when the wall temperature is beyond 250℃.

The comparative evaluation of film-screen combinations

International Nuclear Information System (INIS)

Choi, Gyung Ja; Choi, Syng Kyu

1988-01-01

This study was to compare the quality of image by different screen and film combinations. Using the sensitometer measured the speed and average gradient of blue sensitive films and orthochromatic films. The films was combined with rare earth screen LR, Lm, LF and conventional screen OM, OH, XOR, OKa and exposed the stepwedge to impulse 2, 3, 4, 6, 10, 15, 24, 38, 60 and measured the density. The following results were obtained: 1. The density of film and film-screen combinations showed significant difference, then in film-screen combinations was significantly different by the screens than films. 2. The speed of blue sensitive films was little different, the TMG of orthochromatic films producted high speed, and the AX films was high average gradient. 3. The relative speed of film-screen combinations showed significant difference, and was high in the OKa of the conventional screens and in the LR of the rare earth screens, especially that of LR screen in the combination with blue sensitive films was high. 4. The average gradient of film-screen combinations showed no significant difference, and was high in the OKa screen and LR/OG combination, and that of OKa/AX combination was highest. 5. The latitude of film-screen combinations showed significant difference by screens, and was high in the LM screen in combination with blue sensitive films and in the OM screen in combination with orthochromatic films. 6. The subject contrast of film-screen combinations showed significant difference by screen, and was high in the LR screen in combination with blue sensitive AX film and orthochromatic TMG film.

Glimmering Utopias: 50 Years of African Film Flimmernde Utopien: 50 Jahre afrikanischer Film

Directory of Open Access Journals (Sweden)

Cassis Kilian

2010-01-01

Full Text Available The history of African film began in the 1960s with the independence of the colonies. Despite all kinds of political and economic difficulties, numerous films have been made since then, featuring wide-ranging processes of consolidation, differentiation and transformation which were characteristic of post-colonial sub-Saharan Africa. However, these feature films should not merely be viewed as back references to specifically African problems. The glimmering fictions are imagination spaces. They preserve ideas about how the post-colonial circumstances should be approached. Seen from this perspective, the history of African film may be studied as a history of African utopias. Die Geschichte des afrikanischen Films begann mit der Unabhängigkeit in den 1960er Jahren. Seitdem sind trotz aller politischen und ökonomischen Probleme zahlreiche Filme entstanden. Sie geben umfassende Konsolidierungs-, Differenzierungs- und Transformationsprozesse wieder, die für das postkoloniale subsaharische Afrika charakteristisch waren. Die Spielfilme sollten allerdings nicht nur als Rückschau auf spezifische Probleme Afrikas interpretiert werden. Diese flimmernden Phantasien stellen Imaginationsräume dar; in ihnen sind Ideen enthalten, wie den Bedingungen der postkolonialen Gesellschaften begegnet werden könnte. Aus dieser Sicht heraus könnte die Geschichte des afrikanischen Films auch als Geschichte afrikanischer Utopien erforscht werden.

Discovery in Film, Book Two.

Science.gov (United States)

Gordon, Malcolm W.

Approximately 80 16 millimeter (16mm) short films are reviewed in this introduction and guide which attempts to be comprehensive in touching the major areas and styles of 16mm films now being produced. An attempt is made to describe as carefully as possible the style and content of each film and suggest ways in which the films might be used. Films…

Dosimetric characterization of GafChromic EBT film and its implication on film dosimetry quality assurance

International Nuclear Information System (INIS)

Fuss, Martina; Sturtewagen, Eva; Wagter, Carlos De; Georg, Dietmar

2007-01-01

The suitability of radiochromic EBT film was studied for high-precision clinical quality assurance (QA) by identifying the dose response for a wide range of irradiation parameters typically modified in highly-conformal treatment techniques. In addition, uncertainties associated with varying irradiation conditions were determined. EBT can be used for dose assessment of absorbed dose levels as well as relative dosimetry when compared to absolute absorbed dose calibrated using ionization chamber results. For comparison, a silver halide film (Kodak EDR-2) representing the current standard in film dosimetry was included. As an initial step a measurement protocol yielding accurate and precise results was established for a flatbed transparency scanner (Epson Expression 1680 Pro) that was utilized as a film reading instrument. The light transmission measured by the scanner was found to depend on the position of the film on the scanner plate. For three film pieces irradiated with doses of 0 Gy, ∼1 Gy and ∼7 Gy, the pixel values measured in portrait or landscape mode differed by 4.7%, 6.2% and 10.0%, respectively. A study of 200 film pieces revealed an excellent sheet-to-sheet uniformity. On a long time scale, the optical development of irradiated EBT film consisted of a slow but steady increase of absorbance which was not observed to cease during 4 months. Sensitometric curves of EBT films obtained under reference conditions (SSD = 95 cm, FS = 5 x 5 cm 2 , d = 5 cm) for 6, 10 and 25 MV photon beams did not show any energy dependence. The average separation between all curves was only 0.7%. The variation of the depth d (range 2-25 cm) in the phantom did not affect the dose response of EBT film. Also the influence of the radiation field size (range 3 x 3-40 x 40 cm 2 ) on the sensitometric curve was not significant. For EDR-2 films maximum differences between the calibration curves reached 7-8% for X6MV and X25MV. Radiochromic EBT film, in combination with a flatbed

Morphological Influence of Solution-Processed Zinc Oxide Films on Electrical Characteristics of Thin-Film Transistors

Directory of Open Access Journals (Sweden)

Hyeonju Lee

2016-10-01

Full Text Available We report on the morphological influence of solution-processed zinc oxide (ZnO semiconductor films on the electrical characteristics of ZnO thin-film transistors (TFTs. Different film morphologies were produced by controlling the spin-coating condition of a precursor solution, and the ZnO films were analyzed using atomic force microscopy, X-ray diffraction, X-ray photoemission spectroscopy, and Hall measurement. It is shown that ZnO TFTs have a superior performance in terms of the threshold voltage and field-effect mobility, when ZnO crystallites are more densely packed in the film. This is attributed to lower electrical resistivity and higher Hall mobility in a densely packed ZnO film. In the results of consecutive TFT operations, a positive shift in the threshold voltage occurred irrespective of the film morphology, but the morphological influence on the variation in the field-effect mobility was evident. The field-effect mobility in TFTs having a densely packed ZnO film increased continuously during consecutive TFT operations, which is in contrast to the mobility decrease observed in the less packed case. An analysis of the field-effect conductivities ascribes these results to the difference in energetic traps, which originate from structural defects in the ZnO films. Consequently, the morphological influence of solution-processed ZnO films on the TFT performance can be understood through the packing property of ZnO crystallites.

Silent Film in the German Classroom.

Science.gov (United States)

Caldwell, David

In addition to using films in the German classroom to introduce students to German culture and history, it is important to show and study the film as film. This procedure emphasizes the importance of the film as a part of creative arts in Germany and demands student participation in observation and discussion. Many German silent films are…

Direct-current substrate bias effects on amorphous silicon sputter-deposited films for thin film transistor fabrication

International Nuclear Information System (INIS)

Jun, Seung-Ik; Rack, Philip D.; McKnight, Timothy E.; Melechko, Anatoli V.; Simpson, Michael L.

2005-01-01

The effect that direct current (dc) substrate bias has on radio frequency-sputter-deposited amorphous silicon (a-Si) films has been investigated. The substrate bias produces a denser a-Si film with fewer defects compared to unbiased films. The reduced number of defects results in a higher resistivity because defect-mediated conduction paths are reduced. Thin film transistors (TFTs) that were completely sputter deposited were fabricated and characterized. The TFT with the biased a-Si film showed lower leakage (off-state) current, higher on/off current ratio, and higher transconductance (field effect mobility) than the TFT with the unbiased a-Si film

Magnetic anisotropies in SmCo thin films

International Nuclear Information System (INIS)

Chen, K.

1993-01-01

A systemic study of the deposition processes and magnetic properties for the Sm-Co film system has been carried out. Films of Sm-Co system with various magnetic anisotropies have been synthesized through sputter deposition in both crystalline and amorphous phases. The origins of various anisotropies have been studied. Thermalized sputter deposition process control was used to synthesize Fe enriched Sm-Co films with rhombohedral Th 2 Zn 17 type structure. The film exhibited unusually strong textures with the crystallographic c axes of the crystallites aligned in the film plane. A large anisotropy was resulted with easy axis in the film plane. A well defined and large in-the-film-plane anisotropy of exceptionally high value of 3.3 x 10 6 erg/cm 3 has been obtained in the amorphous SmCo films by applying a magnetic field in the film plane during deposition. It was found that the in-the-film-plane anisotropy depended essentially on the applied field and Sm concentration. For films not synthesized through thermallized sputtering, the easy axis of the film could reoriented. A perpendicular anisotropy was also presented in the film synthesized through thermallized sputtering deposition. A large in-plane anisotropy was obtained in films deposited above ambient temperatures. It was concluded that the surface induced short range ordering was the origin of the in-the-film-phase anisotropy observed in amorphous film deposited in the presence of a magnetic field. The formation mechanism was different from that of the short range ordering induced by field annealing. The perpendicular anisotropy was shown to be growth induced. Large in-plane anisotropy in amorphous films was resulted form partial crystallization in the film. Both the formation of growth induced structure and partial crystallization in the film prevented the formation of the pair ordering and decreased in-the-film-plane anisotropy

Intermetallic semiconducting films

CERN Document Server

Wieder, H H

1970-01-01

Intermetallic Semiconducting Films introduces the physics and technology of AшВv compound films. This material is a type of a polycrystalline semiconductor that is used for galvanomagnetic device applications. Such material has a high electron mobility that is ideal for generators and magnetoresistors. The book discusses the available references on the preparation and identification of the material. An assessment of its device applications and other possible use is also enumerated. The book describes the structures and physical parts of different films. A section of the book covers the three t

X-ray film

International Nuclear Information System (INIS)

Arndt, U.W.; Gilmore, D.J.; Wonacott, A.J.

1977-01-01

The performance of film as an X-ray detector is discussed and its behaviour is compared with that of a perfect Poissonian detector. The efficiency of microdensitometry as a method of extracting the information recorded on the film is discussed. More emphasis is placed in the precision of microdensitometric measurements than on the more obvious characteristic of film speed. The effects of chemical fog and background on the precision of the measurements is considered and it is concluded that the final limit to precision is set by the chemical fog. (B.D.)

Radiation grafting on natural films

Science.gov (United States)

Lacroix, M.; Khan, R.; Senna, M.; Sharmin, N.; Salmieri, S.; Safrany, A.

2014-01-01

Different methods of polymer grafting using gamma irradiation are reported in the present study for the preparation of newly functionalized biodegradable films, and some important properties related to their mechanical and barrier properties are described. Biodegradable films composed of zein and poly(vinyl alcohol) (PVA) were gamma-irradiated in presence of different ratios of acrylic acid (AAc) monomer for compatibilization purpose. Resulting grafted films (zein/PVA-g-AAc) had their puncture strength (PS=37-40 N mm-1) and puncture deformation (PD=6.5-9.8 mm) improved for 30% and 50% PVA in blend, with 5% AAc under 20 kGy. Methylcellulose (MC)-based films were irradiated in the presence of 2-hydroxyethyl methacrylate (HEMA) or silane, in order to determine the effect of monomer grafting on the mechanical properties of films. It was found that grafted films (MC-g-HEMA and MC-g-silane) using 35% monomer performed higher mechanical properties with PS values of 282-296 N mm-1 and PD of 5.0-5.5 mm under 10 kGy. Compatibilized polycaprolactone (PCL)/chitosan composites were developed via grafting silane in chitosan films. Resulting trilayer grafted composite film (PCL/chitosan-g-silane/PCL) presented superior tensile strength (TS=22 MPa) via possible improvement of interfacial adhesion (PCL/chitosan) when using 25% silane under 10 kGy. Finally, MC-based films containing crystalline nanocellulose (CNC) as a filling agent were prepared and irradiated in presence of trimethylolpropane trimethacrylate (TMPTMA) as a grafted plasticizer. Grafted films (MC-g-TMPTMA) presented superior mechanical properties with a TS of 47.9 MPa and a tensile modulus (TM) of 1792 MPa, possibly due to high yield formation of radicals to promote TMPTMA grafting during irradiation. The addition of CNC led to an additional improvement of the barrier properties, with a significant 25% reduction of water vapor permeability (WVP) of grafted films.

Ion beam assisted film growth

CERN Document Server

Itoh, T

2012-01-01

This volume provides up to date information on the experimental, theoretical and technological aspects of film growth assisted by ion beams.Ion beam assisted film growth is one of the most effective techniques in aiding the growth of high-quality thin solid films in a controlled way. Moreover, ion beams play a dominant role in the reduction of the growth temperature of thin films of high melting point materials. In this way, ion beams make a considerable and complex contribution to film growth. The volume will be essential reading for scientists, engineers and students working in thi

2006. aasta arhitektuurikonkursid / Karen Jagodin

Index Scriptorium Estoniae

Jagodin, Karen, 1982-

2006-01-01

Toodud ka 2006. a. konkursside tulemused: Eesti Rahva Muuseumi uus hoone, Tartu Ida t. lastead, Kiviõli linnaväljak, Tartu Lutsu t. korterelamu fassaadilahendus, Paide spordihall, Pärnu piirivalvekordoni hoone, Tartu Rebase t. kortermajade kompleks, Viljandi Maagümnaasiumi juurdeehitus, Veneetsia X arhitektuuribiennaali Eesti kuraatorinäitus, betoonehitis 2005, Estonia Seltsi vana teatrimaja asukoha tähistamine, TTÜ uus raamatukogu, Maakri kvartali arhitektuurikonkursi I etapp, Viljandi Uku t. 1A Lidli kauplusehoone ja südalinna kvartali detailplaneering, Pärnu jõeäärse keskuse ideeplaneering, Karksi-Nuia keskväljak ja roheala, terasehitis 2006, Edela-Eesti loodus- ja keskkonnahariduskeskuse ehk ökomaja eskiisprojekt, puitehitis 2006

Teaching Culture Through Films

Institute of Scientific and Technical Information of China (English)

徐婷

2016-01-01

Cultural teaching is an issue which is associated with complexity and paradox and also it is a big challenge for faculty. Teaching culture through films has become an important way of cross-cultural teaching This paper focuses on the reasons for teaching culture through films, the value and how it works. And finally it leads out the prospects of cultural teaching through films.

Ion beam-based characterization of multicomponent oxide thin films and thin film layered structures

International Nuclear Information System (INIS)

Krauss, A.R.; Rangaswamy, M.; Lin, Yuping; Gruen, D.M.; Schultz, J.A.; Schmidt, H.K.; Chang, R.P.H.

1992-01-01

Fabrication of thin film layered structures of multi-component materials such as high temperature superconductors, ferroelectric and electro-optic materials, and alloy semiconductors, and the development of hybrid materials requires understanding of film growth and interface properties. For High Temperature Superconductors, the superconducting coherence length is extremely short (5--15 Angstrom), and fabrication of reliable devices will require control of film properties at extremely sharp interfaces; it will be necessary to verify the integrity of thin layers and layered structure devices over thicknesses comparable to the atomic layer spacing. Analytical techniques which probe the first 1--2 atomic layers are therefore necessary for in-situ characterization of relevant thin film growth processes. However, most surface-analytical techniques are sensitive to a region within 10--40 Angstrom of the surface and are physically incompatible with thin film deposition and are typically restricted to ultra high vacuum conditions. A review of ion beam-based analytical methods for the characterization of thin film and multi-layered thin film structures incorporating layers of multicomponent oxides is presented. Particular attention will be paid to the use of time-of-flight techniques based on the use of 1- 15 key ion beams which show potential for use as nondestructive, real-time, in-situ surface diagnostics for the growth of multicomponent metal and metal oxide thin films

NMR characterization of thin films

Science.gov (United States)

Gerald II, Rex E.; Klingler, Robert J.; Rathke, Jerome W.; Diaz, Rocio; Vukovic, Lela

2010-06-15

A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

NMR characterization of thin films

Science.gov (United States)

Gerald, II, Rex E.; Klingler, Robert J.; Rathke, Jerome W.; Diaz, Rocio; Vukovic, Lela

2008-11-25

A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

Surface Modification of Solution-Processed ZrO2 Films through Double Coating for Pentacene Thin-Film Transistors

Science.gov (United States)

Kwon, Jin-Hyuk; Bae, Jin-Hyuk; Lee, Hyeonju; Park, Jaehoon

2018-03-01

We report the modification of surface properties of solution-processed zirconium oxide (ZrO2) dielectric films achieved by using double-coating process. It is proven that the surface properties of the ZrO2 film are modified through the double-coating process; the surface roughness decreases and the surface energy increases. The present surface modification of the ZrO2 film contributes to an increase in grain size of the pentacene film, thereby increasing the field-effect mobility and decreasing the threshold voltage of the pentacene thin-film transistors (TFTs) having the ZrO2 gate dielectric. Herein, the molecular orientation of pentacene film is also studied based on the results of contact angle and X-ray diffraction measurements. Pentacene molecules on the double-coated ZrO2 film are found to be more tilted than those on the single-coated ZrO2 film, which is attributed to the surface modification of the ZrO2 film. However, no significant differences are observed in insulating properties between the single-and the double-coated ZrO2 dielectric films. Consequently, the characteristic improvements of the pentacene TFTs with the double-coated ZrO2 gate dielectric film can be understood through the increase in pentacene grain size and the reduction in grain boundary density.

Music as word: Film music - superlibretto?

Directory of Open Access Journals (Sweden)

Ćirić Marija

2013-01-01

Full Text Available The aim of his paper is to prove that film music can be understood as authentic narrative force: film music as word / discourse and its superlibretto status. Superlibretto is the status of music in a film which is constructing its own (aural reality and is narrating, speaking its own text which creates a wholesome film meaning. The existence of superlibretto is substantiated by fundamental theoretic concepts of film music and practically proven by analyses of examples taken from the opus of Serbian film composer Zoran Simjanović.

Uus internetikunsti preemia

Index Scriptorium Estoniae

2000-01-01

San Francisco Moodsa Kunsti Muuseum asutas internetikunsti aastapreemia - Webby Price (üle 700000 krooni). Preemiaga kaasneb digitaalse näituse ülesriputamine internetti. Seni suurim rahvusvaheline internetikunsti preemia, austerlaste Prix Ars Electronica läks 2000. a. arvutiprogrammile Linux.

Algab uus kontserdisari

Index Scriptorium Estoniae

2008-01-01

Meloodilist ekstreem-metal'it viljelevast rootsi ansamblist Soilwork, kontserdist BEM Agency uue kontserdisarja Greenpit raames 20. veebr. Tallinnas klubis Rock CAfé (soojendusesinejaks ansambel Stem)

Uus raamat arhitektuurist

Index Scriptorium Estoniae

1999-01-01

6. sept. esitleti "Võitlevas Sõnas" arhitektuuribüroo Künnapu & Padrik enda publitseeritud raamatut "Valitud töid/Selected Works", milles on pildiline kui tekstiline info nende loomingust alates 1984. a.

Uus mõtlemine!

Index Scriptorium Estoniae

2008-01-01

Väljavõtted Pärnu turunduskonverentsi ettekannetest ja sõnavõttudest. Uue mõtlemise üle arutlevad Ola Alvarsson; Andrei Korobeinik; Aune Past; William Higham; Richard Laermer; Amnon Levav, Kristjan Port

Uus Multiphonic Rodent

Index Scriptorium Estoniae

2009-01-01

Tartus tegutsenud eksperimentaal-rock-duo Opium Flirt Eestisse jäänud liige Erki Hõbe (paarimees Ervin Trofimov tegutseb Ungaris) annab välja oma teise sooloalbumi nime all Multiphonic Rodent, heliplaadi "Astral Dance" esitluskontsert toimub 5. veebruaril Tallinnas baaris Juuksur

Selective inorganic thin films

Energy Technology Data Exchange (ETDEWEB)

Phillips, M.L.F.; Weisenbach, L.A.; Anderson, M.T. [Sandia National Laboratories, Albuquerque, NM (United States)] [and others

1995-05-01

This project is developing inorganic thin films as membranes for gas separation applications, and as discriminating coatings for liquid-phase chemical sensors. Our goal is to synthesize these coatings with tailored porosity and surface chemistry on porous substrates and on acoustic and optical sensors. Molecular sieve films offer the possibility of performing separations involving hydrogen, air, and natural gas constituents at elevated temperatures with very high separation factors. We are focusing on improving permeability and molecular sieve properties of crystalline zeolitic membranes made by hydrothermally reacting layered multicomponent sol-gel films deposited on mesoporous substrates. We also used acoustic plate mode (APM) oscillator and surface plasmon resonance (SPR) sensor elements as substrates for sol-gel films, and have both used these modified sensors to determine physical properties of the films and have determined the sensitivity and selectivity of these sensors to aqueous chemical species.

Conceiving Landscape through Film

DEFF Research Database (Denmark)

Farsø, Mads; Munck Petersen, Rikke

2015-01-01

This article shows how the media of film can be integrated, explored and can add value to architectural design studios and practice. It elucidates how film may offer an alternative position in architecture, where landscapes and cities are thought, planned and developed in closer relation...... to their spatial and sensory effects on humans. It underscores that the film camera can work as a kind of amplifier of how we, with our bodies, perceive space and project space. In the “Landscape Film” Studio at University of Copenhagen the film medium was tested as a combined registration and design tool...... for a new Nature Park south of Copenhagen. The final studio films and designs show how resonate recordings of sound, time and a bodily presence may simulate an Einfühling that inspires an alternative architecture of relations: the ambient, the changeable and the volatile. They also emphasize that an ability...

The Possibility of Film Criticism.

Science.gov (United States)

Poague, Leland; Cadbury, William

1989-01-01

Examines the role of critical language in film criticism. Compares and contrasts Monroe Beardsley's philosophy on film aesthetics with the New Criticism. Outlines some of the contributions Beardsley has made to the study of film criticism. (KM)

Application of a tablet film coating model to define a process-imposed transition boundary for robust film coating.

Science.gov (United States)

van den Ban, Sander; Pitt, Kendal G; Whiteman, Marshall

2018-02-01

A scientific understanding of interaction of product, film coat, film coating process, and equipment is important to enable design and operation of industrial scale pharmaceutical film coating processes that are robust and provide the level of control required to consistently deliver quality film coated product. Thermodynamic film coating conditions provided in the tablet film coating process impact film coat formation and subsequent product quality. A thermodynamic film coating model was used to evaluate film coating process performance over a wide range of film coating equipment from pilot to industrial scale (2.5-400 kg). An approximate process-imposed transition boundary, from operating in a dry to a wet environment, was derived, for relative humidity and exhaust temperature, and used to understand the impact of the film coating process on product formulation and process control requirements. This approximate transition boundary may aid in an enhanced understanding of risk to product quality, application of modern Quality by Design (QbD) based product development, technology transfer and scale-up, and support the science-based justification of critical process parameters (CPPs).

Surface Properties of a Novel Poly(vinyl alcohol Film Prepared by Heterogeneous Saponification of Poly(vinyl acetate Film

Directory of Open Access Journals (Sweden)

Seong Baek Yang

2017-10-01

Full Text Available Almost general poly(vinyl alcohol (PVA films were prepared by the processing of a PVA solution. For the first time, a novel poly(vinyl alcohol (PVA film was prepared by the saponification of a poly(vinyl acetate (PVAc film in a heterogenous medium. Under the same saponification conditions, the influence of saponification time on the degree of saponification (DS was studied for the preparation of the saponified PVA film, and it was found that the DS varied with time. Optical microscopy was used to confirm the characteristics and surface morphology of the saponified PVA film, revealing unusual black globules in the film structure. The contact angle of the films was measured to study the surface properties, and the results showed that the saponified PVA film had a higher contact angle than the general PVA film. To confirm the transformation of the PVAc film to the PVA film, 1H nuclear magnetic resonance spectroscopy, X-ray diffraction measurements, differential scanning calorimetry, and Fourier-transform infrared spectroscopy were employed.

Electrical initiation of an energetic nanolaminate film

Science.gov (United States)

Tringe, Joseph W.; Gash, Alexander E.; Barbee, Jr., Troy W.

2010-03-30

A heating apparatus comprising an energetic nanolaminate film that produces heat when initiated, a power source that provides an electric current, and a control that initiates the energetic nanolaminate film by directing the electric current to the energetic nanolaminate film and joule heating the energetic nanolaminate film to an initiation temperature. Also a method of heating comprising providing an energetic nanolaminate film that produces heat when initiated, and initiating the energetic nanolaminate film by directing an electric current to the energetic nanolaminate film and joule heating the energetic nanolaminate film to an initiation temperature.

Radiochromic film and polarization effects

International Nuclear Information System (INIS)

Yu, P.K.N.; Cheung, T.; Butson, M.J.; Cancer Services, Wollongong, NSW; Inwood, D.

2004-01-01

Full text: A new high sensitivity radiochromic film has been tested for its polarization properties. Gafchromic HS film has been shown to produce a relatively small (less than 3%) variation in measured optical density measured at 660nm wavelength when the light source is fully linear polarized and the film is rotated through 360 deg angle. Similar variations are seen when the detector is linearly polarized. If both light source and detector is linearly polarised variations in measured optical density can reach 15% when the film is rotated through 360 deg angle. This seems to be due to a phase shift in polarised light caused by the radiochromic film resulting in the polarised light source becoming out of phase with the polarised detector. Gafchromic HS radiochromic film produces a minimal polarization response with varying angle of rotation however we recommend that a polarization test be performed on a densitometry system to establish the extent of its polarization properties before accuracy dosimetry is performed with radiochromic HS film. Copyright (2004) Australasian College of Physical Scientists and Engineers in Medicine

Den danske independent film

DEFF Research Database (Denmark)

Hansen, Kim Toft

2014-01-01

at producere film, og derved er filmproduktion potentielt gjort tilgængelig for en større gruppe personer som både afsender og modtager. For det fjerde implicerer diskussionen af de to film også genre- og stilmæssige spørgsmål om dansk filmkultur, fordi indiefilmen både i film og uden for filmene italesætter...

Introduction to Film Making.

Science.gov (United States)

Davis, Robert E.

This booklet is intended for teachers who are now teaching units in film production as part of a program in communication or who wish to begin work with filmmaking in such a program. The first section is intended to serve as a brief introduction to film theory, while a major portion of the rest of the booklet is devoted to film projects which may…

Renaissance of the Film.

Science.gov (United States)

Bellone, Julius, Ed.

The post-World War II period was one of the liveliest in the history of the cinema. This is a collection of 33 critical articles on some of the best films of the perd. Most of the essays explicate the themes and symbols of the films. The essays deal with these films: "The Apu Trilogy,""L'Avventura,""Balthazar,""Blow-Up,""Bonnie and Clyde," Citizen…

Short-film Festival at the Globe

CERN Multimedia

2007-01-01

Get out your diaries and prepare to be star-struck as the Globe of Science and Innovation meets the silver screen! The CERN "Open Your Eyes Films" film-making club is organising a festival of short films entitled CinéGlobe from Thursday 8 to Saturday 10 November. On the Thursday and Friday, you’ll be able to watch 47 short films free of charge in the Globe of Science and Innovation at various times of the day. The short films to be screened come from 21 different countries and have been selected from among 1400 entrees! All film genres will be represented : comedy, drama, animation, documentaries, experimental films, etc. Members of the public will even be able to vote for their favourite film: the audience’s favourite will be awarded a "Coup de coeur" award. An awards ceremony to honour the films that have received most votes will be held on Friday evening in the Globe of Science and Innovation. The Golden CinéGlobe for bes...

Contact angles in thin liquid films III. Interaction forces in Newton black soap films

NARCIS (Netherlands)

Feijter, J.A. de; Vrij, A.

The interaction parameters of Newton black soap films stabilized by NaDS, as derived from contact angle experiments, have been interpretated in terms of the structure and the interaction forces in the films. From the film thickness and the difference between the surface excess of the salt in the

Rare Earth Oxide Thin Films

CERN Document Server

Fanciulli, Marco

2007-01-01

Thin rare earth (RE) oxide films are emerging materials for microelectronic, nanoelectronic, and spintronic applications. The state-of-the-art of thin film deposition techniques as well as the structural, physical, chemical, and electrical properties of thin RE oxide films and of their interface with semiconducting substrates are discussed. The aim is to identify proper methodologies for the development of RE oxides thin films and to evaluate their effectiveness as innovative materials in different applications.

The combat film : the death and rebirth of an American film tradition

OpenAIRE

Greve, Henrik Havdal

2009-01-01

Abstract This thesis analyzes how four popular combat films produced by Hollywood portray and interprets important events in American history. The films exemplify how American cinema has varied in its portrayal of the American army in relation to both the perspectives of the film makers and widely held attitudes toward war and American foreign policy. In regard to social attitudes, militarism has been an instrument to create support for war. The term describes a process where a societ...

Film in Education: This Worked For Me.

Science.gov (United States)

Breen, Myles P.

Several techniques for teaching film appreciation to adults are discussed, including the use of audio cassettes, instructional films, silent films, and film dissection. Included are the techniques, philosophy, and content of a seminar on the short film, in which the short film is viewed as a variant of a short story, a pop song, a joke, and a…

Geoflicks Reviewed--Films about Hawaiian Volcanoes.

Science.gov (United States)

Bykerk-Kauffman, Ann

1994-01-01

Reviews 11 films on volcanic eruptions in the United States. Films are given a one- to five-star rating and the film's year, length, source and price are listed. Top films include "Inside Hawaiian Volcanoes" and "Kilauea: Close up of an Active Volcano." (AIM)

"Space slitter" for film or tape

Science.gov (United States)

Johnson, W. H.

1978-01-01

Device cuts film or tape into strips by guiding film in channel under cutting blades. Device is operated by lifting pressure bar to insert blades into film. Film is then pulled through blades. Cutter has potential uses in advertising, commercial art, and publishing fields.

Improvement of physical properties of IGZO thin films prepared by excimer laser annealing of sol–gel derived precursor films

International Nuclear Information System (INIS)

Tsay, Chien-Yie; Huang, Tzu-Teng

2013-01-01

Indium gallium zinc oxide (IGZO) transparent semiconductor thin films were prepared by KrF excimer laser annealing of sol–gel derived precursor films. Each as-coated film was dried at 150 °C in air and then annealed using excimer laser irradiation. The influence of laser irradiation energy density on surface conditions, optical transmittances, and electrical properties of laser annealed IGZO thin films were investigated, and the physical properties of the excimer laser annealed (ELA) and the thermally annealed (TA) thin films were compared. Experimental results showed that two kinds of surface morphology resulted from excimer laser annealing. Irradiation with a lower energy density (≤250 mJ cm −2 ) produced wavy and irregular surfaces, while irradiation with a higher energy density (≥350 mJ cm −2 ) produced flat and dense surfaces consisting of uniform nano-sized amorphous particles. The explanation for the differences in surface features and film quality is that using laser irradiation energy to form IGZO thin films improves the film density and removes organic constituents. The dried IGZO sol–gel films irradiated with a laser energy density of 350 mJ/cm 2 had the best physical properties of all the ELA IGZO thin films. The mean resistivity of the ELA 350 thin films (4.48 × 10 3 Ω cm) was lower than that of TA thin films (1.39 × 10 4 Ω cm), and the average optical transmittance in the visible range (90.2%) of the ELA 350 thin films was slightly higher than that of TA thin films (89.7%). - Highlights: • IGZO semiconductor films were prepared by laser annealing of sol–gel derived films. • Surface roughness and resistivity of ELA samples were affected by energy density. • The ELA 350 IGZO film exhibited the best properties among all of ELA IGZO films. • Transmittance and resistivity of ELA 350 films are greater than those of TA films

Improvement of physical properties of IGZO thin films prepared by excimer laser annealing of sol–gel derived precursor films

Energy Technology Data Exchange (ETDEWEB)

Tsay, Chien-Yie, E-mail: cytsay@fcu.edu.tw; Huang, Tzu-Teng

2013-06-15

Indium gallium zinc oxide (IGZO) transparent semiconductor thin films were prepared by KrF excimer laser annealing of sol–gel derived precursor films. Each as-coated film was dried at 150 °C in air and then annealed using excimer laser irradiation. The influence of laser irradiation energy density on surface conditions, optical transmittances, and electrical properties of laser annealed IGZO thin films were investigated, and the physical properties of the excimer laser annealed (ELA) and the thermally annealed (TA) thin films were compared. Experimental results showed that two kinds of surface morphology resulted from excimer laser annealing. Irradiation with a lower energy density (≤250 mJ cm{sup −2}) produced wavy and irregular surfaces, while irradiation with a higher energy density (≥350 mJ cm{sup −2}) produced flat and dense surfaces consisting of uniform nano-sized amorphous particles. The explanation for the differences in surface features and film quality is that using laser irradiation energy to form IGZO thin films improves the film density and removes organic constituents. The dried IGZO sol–gel films irradiated with a laser energy density of 350 mJ/cm{sup 2} had the best physical properties of all the ELA IGZO thin films. The mean resistivity of the ELA 350 thin films (4.48 × 10{sup 3} Ω cm) was lower than that of TA thin films (1.39 × 10{sup 4} Ω cm), and the average optical transmittance in the visible range (90.2%) of the ELA 350 thin films was slightly higher than that of TA thin films (89.7%). - Highlights: • IGZO semiconductor films were prepared by laser annealing of sol–gel derived films. • Surface roughness and resistivity of ELA samples were affected by energy density. • The ELA 350 IGZO film exhibited the best properties among all of ELA IGZO films. • Transmittance and resistivity of ELA 350 films are greater than those of TA films.

Chemical Annealing of Zinc Tetraphenylporphyrin Films: Effects on Film Morphology and Organic Photovoltaic Performance

KAUST Repository

Trinh, Cong

2012-07-10

We present a chemical annealing process for organic thin films. In this process, a thin film of a molecular material, such as zinc tetraphenylporphyrin (ZnTPP), is exposed to a vapor of nitrogen-based ligand (e.g., pyrazine, pz, and triazine, tz), forming a film composed of the metal-ligand complex. Fast and quantitative formation of the complex leads to marked changes in the morphology and optical properties of the film. X-ray diffraction studies show that the chemical annealing process converts amorphous ZnTPP films to crystalline ZnTPP•ligand films, whose porphryin planes lie nearly parallel to the substrate (average deviation is 8° for the ZnTPP•pz film). Organic solar cells were prepared with ZnTPP donor and C 60 acceptor layers. Devices were prepared with and without chemical annealing of the ZnTPP layer with a pyrazine ligand. The devices with chemically annealed ZnTPP donor layer show an increase in short-circuit current (J SC) and fill factor (FF) relative to analogous unannealed devices, presumably because of enhanced exciton diffusion length and improved charge conductivity. The open circuit voltages (V OC) of the chemically annealed devices are lower than their unannealed counterpart because of enhanced polaron pair recombination at the donor/acceptor heterojunction. A net improvement of 5-20% in efficiency has been achieved, after chemical annealing of ZnTPP films with pyrazine. © 2012 American Chemical Society.

Realistic absorption coefficient of ultrathin films

Science.gov (United States)

Cesaria, M.; Caricato, A. P.; Martino, M.

2012-10-01

Both a theoretical algorithm and an experimental procedure are discussed of a new route to determine the absorption/scattering properties of thin films deposited on transparent substrates. Notably, the non-measurable contribution of the film-substrate interface is inherently accounted for. While the experimental procedure exploits only measurable spectra combined according to a very simple algorithm, the theoretical derivation does not require numerical handling of the acquired spectra or any assumption on the film homogeneity and substrate thickness. The film absorption response is estimated by subtracting the measured absorption spectrum of the bare substrate from that of the film on the substrate structure but in a non-straightforward way. In fact, an assumption about the absorption profile of the overall structure is introduced and a corrective factor accounting for the relative film-to-substrate thickness. The method is tested on films of a well known material (ITO) as a function of the film structural quality and influence of the film-substrate interface, both deliberately changed by thickness tuning and doping. Results are found fully consistent with information obtained by standard optical analysis and band gap values reported in the literature. Additionally, comparison with a conventional method demonstrates that our route is generally more accurate even if particularly suited for very thin films.

Flexible Ultra Moisture Barrier Film for Thin-Film Photovoltaic Applications

Energy Technology Data Exchange (ETDEWEB)

David M. Dean

2012-10-30

Flexible Thin-film photovoltaic (TFPV) is a low cost alternative to incumbent c-Si PV products as it requires less volume of costly semiconductor materials and it can potentially reduce installation cost. Among the TFPV options, copper indium gallium diselenide (CIGS) has the highest efficiency and is believed to be one of the most attractive candidates to achieve PV cost reduction. However, CIGS cells are very moisture sensitive and require module water vapor transmission rate (WVTR) of less than 1x10-4 gram of water per square meter per day (g-H2O/m2/day). Successful development and commercialization of flexible transparent ultra moisture barrier film is the key to enable flexible CIGS TFPV products, and thus enable ultimate PV cost reduction. At DuPont, we have demonstrated at lab scale that we can successfully make polymer-based flexible transparent ultra moisture barrier film by depositing alumina on polymer films using atomic layer deposition (ALD) technology. The layer by layer ALD approach results in uniform and amorphous structure which effectively reduces pinhole density of the inorganic coating on the polymer, and thus allow the fabrication of flexible barrier film with WVTR of 10-5 g-H2O/m2/day. Currently ALD is a time-consuming process suitable only for high-value, relatively small substrates. To successfully commercialize the ALD-on-plastic technology for the PV industry, there is the need to scale up this technology and improve throughput. The goal of this contract work was to build a prototype demonstrating that the ALD technology could be scaled-up for commercial use. Unfortunately, the prototype failed to produce an ultra-barrier film by the close of the project.

Kas Margaret Thatcher oli ikka naine? / Kadi Viik ; interv. Kalev Kesküla, Harry Liivrand, Margit Tõnson

Index Scriptorium Estoniae

Viik, Kadi

2005-01-01

Sotsiaalministeeriumi soolise võrdõiguslikkuse osakonna juhataja Kadi Viik korraldab rahvusvahelise konverentsi "New Masculinity Tallinn 2005" (Uus mehelikkus). Lisaks nimekiri: Eesti nais(kultuuri)juhte

Turunduse tulevik on integratsioon / Mark Ritson

Index Scriptorium Estoniae

Ritson, Mark

2001-01-01

Integreeritud turunduskommunikatsioon (IMC - Integrated Marketing Communications) kui uus turundusmeetod. Tabel ja skeem: sobilikud piirkonnad erinevate IMC tööriistade jaoks; tarbija otsustamise õpikumudel

Битва с гигантами

Index Scriptorium Estoniae

2009-01-01

SDE uus esimees Jüri Pihl teatas, et sotsiaaldemokraatidel on alternatiiv seni valitsenud neoliberaalsele ideoloogiale, Pihli vastasseis hakkab Reformierakonnaga olema hoopis teistsugune kui Keskerakonnaga

Internetikunsti jätkuv tulemine / Meelis Kaldalu

Index Scriptorium Estoniae

Kaldalu, Meelis

2004-01-01

Internetikunst (veebikunst, interaktiivne kunst, võrgukunst, netikunst, net.art) - loominguline tegevus, mis peab Internetti oma auditooriumiks. Manifestid. Internetikunst ja reaalsuse populaarsus, uus meedia. Internetiaadressid

Horror films and psychiatry.

Science.gov (United States)

Friedman, Susan Hatters; Forcen, Fernando Espi; Shand, John Preston

2014-10-01

Horror films have been popular for generations. The purpose of this article is to illustrate psychiatric conditions, themes and practice seen in horror films. Horror films often either include psychiatrists as characters or depict (Hollywood's dangerous version of) serious mental illness. Demonic possession, zombies, and 'slasher' killers are described, as well as the horror genre's characterizations of psychiatrists. © The Royal Australian and New Zealand College of Psychiatrists 2014.

Music as word: Film music - superlibretto?

OpenAIRE

Ćirić Marija

2013-01-01

The aim of his paper is to prove that film music can be understood as authentic narrative force: film music as word / discourse and its superlibretto status. Superlibretto is the status of music in a film which is constructing its own (aural) reality and is narrating, speaking its own text which creates a wholesome film meaning. The existence of superlibretto is substantiated by fundamental theoretic concepts of film music and practically proven by analyses...

Cellulose triacetate, thin film dielectric capacitor

Science.gov (United States)

Yen, Shiao-Ping S. (Inventor); Jow, T. Richard (Inventor)

1995-01-01

Very thin films of cellulose triacetate are cast from a solution containing a small amount of high boiling temperature, non-solvent which evaporates last and lifts the film from the casting surface. Stretched, oriented, crystallized films have high electrical breakdown properties. Metallized films less than about 2 microns in thickness form self-healing electrodes for high energy density, pulsed power capacitors. Thicker films can be utilized as a dielectric for a capacitor.

Penciptaan Seni Film Eksperimental “Sweet Rahwana”

Directory of Open Access Journals (Sweden)

Hery Sasongko

2014-11-01

Full Text Available Akhir-akhir ini bioskop di Indonesia memutar film-film horor. Genre film yangmuncul di Indonesia sejak tahun 1941 melalui Film Tengkorak Hidoep ini jugadiminati banyak penikmat film tanah air. Sebut saja film Sundel Bolong dan NyiBlorong yang menggondol Piala Antemas FFI (Festival Film Indonesia untuk FilmTerlaris 1982-1983. Film-film horor juga terus mampu meraup jumlah penontonyang besar dikarenakan bumbu adegan seks yang banyak ada di film-film hororIndonesia. Jika kembali mengaca pada sejarah termasuk sejarah perfilman Indonesia,penulis percaya akan ada titik jenuh. Penonton akan bosan dan kembali menjauhibioskop dengan film Indonesia. Kondisi ini pernah terjadi hanya sesaat sebelumdunia film Indonesia mati suri. Wayang bisa menjadi sumber inspirasi untukmengatasi kejenuhan tema film di Indonesia. Wayang adalah legenda yang tidakbisa dipisahkan dari cerita para tokoh tokohnya, salah satunya adalah karakter tokohRahwana yang selalu berwatak jahat. Unsur-unsur yang terdapat dalam karakterRahwana menjadi inspirasi untuk membuat karya film eksperimental agar menjadikarya dan tontonan alternatif bagi generasi muda Indonesia sehingga bisa menambahwawasan yang lebih luas. Dengan cara mengeksplorasi visual serta metode editingdengan teknik yang baru dan bermutu dapat menjadikan film eksperimental yangberkualitas untuk ditonton. “Sweet Ravana” an Experimental Film Art. Recently, cinemas in Indonesia play scarymovies. Scary movies have appeared in Indonesia since 1941 through a film entitled“Tengkorak Hidoep”. Many people got attracted with it. “Sundel Bolong” and “NyiBlorong” movies got achievement on Anthemas Cup FFI (Indonesian Film Festivalaward for a best-selling movies category in 1982-1983. Scary movies have been succsesfullto get a lot of audiences because of many sex scenes in the Indonesian scary movies. Thewriter believes there will be a saturation point against its. The audience will be boredand keep away from Indonesian

Linking Character Strengths and Learning with Films: A Content Analysis of Films for Adolescents

Science.gov (United States)

Phaire, Dorothy W.

2013-01-01

Despite abundant research substantiating the value of teaching with films, there is a dearth of accessible resources that can help educators select films for positive modeling of character strengths. This scarcity exists in spite of the evidence that supports the efficacy of films' influence on young people. Young people today are receiving…

P-type thin films transistors with solution-deposited lead sulfide films as semiconductor

Energy Technology Data Exchange (ETDEWEB)

Carrillo-Castillo, A.; Salas-Villasenor, A.; Mejia, I. [Department of Materials Science and Engineering, The University of Texas at Dallas. 800 West Campbell Rd, Richardson, TX 75083 (United States); Aguirre-Tostado, S. [Centro de Investigacion en Materiales Avanzados, S. C. Alianza Norte 202, Parque de Investigacion e Innovacion Tecnologica, Apodaca, Nuevo Leon, C.P. 666000 (Mexico); Gnade, B.E. [Department of Materials Science and Engineering, University of Texas at Dallas. 800 West Campbell Rd, Richardson, TX 75083 (United States); Quevedo-Lopez, M.A., E-mail: mxq071000@utdallas.edu [Department of Materials Science and Engineering, University of Texas at Dallas. 800 West Campbell Rd, Richardson, TX 75083 (United States)

2012-01-31

In this paper we demonstrate p-type thin film transistors fabricated with lead sulfide (PbS) as semiconductor deposited by chemical bath deposition methods. Crystallinity and morphology of the resulting PbS films were characterized using X-ray diffraction, atomic force microscopy and scanning electron microscopy. Devices were fabricated using photolithographic processes in a bottom gate configuration with Au as source and drain top contacts. Field effect mobility for as-fabricated devices was {approx} 0.09 cm{sup 2} V{sup -1} s{sup -1} whereas the mobility for devices annealed at 150 Degree-Sign C/h in forming gas increased up to {approx} 0.14 cm{sup 2} V{sup -1} s{sup -1}. Besides the thermal annealing, the entire fabrications process was maintained below 100 Degree-Sign C. The electrical performance of the PbS-thin film transistors was studied before and after the 150 Degree-Sign C anneal as well as a function of the PbS active layer thicknesses. - Highlights: Black-Right-Pointing-Pointer Thin film transistors with PbS as semiconductor deposited by chemical bath deposition. Black-Right-Pointing-Pointer Photolithography-based thin film transistors with PbS films at low temperatures. Black-Right-Pointing-Pointer Electron mobility for anneal-PbS devices of {approx} 0.14 cm{sup 2} V{sup -1} s{sup -1}. Black-Right-Pointing-Pointer Highest mobility reported in thin film transistors with PbS as the semiconductor.

Superhydrophobic films and methods for making superhydrophobic films

Science.gov (United States)

Aytug, Tolga; Paranthaman, Mariappan Parans; Simpson, John T.; Bogorin, Daniela Florentina

2017-09-26

This disclosure relates to methods that include depositing a first component and a second component to form a film including a plurality of nanostructures, and coating the nanostructures with a hydrophobic layer to render the film superhydrophobic. The first component and the second component can be immiscible and phase-separated during the depositing step. The first component and the second component can be independently selected from the group consisting of a metal oxide, a metal nitride, a metal oxynitride, a metal, and combinations thereof. The films can have a thickness greater than or equal to 5 nm; an average surface roughness (Ra) of from 90 to 120 nm, as measured on a 5 .mu.m.times.5 .mu.m area; a surface area of at least 20 m.sup.2/g; a contact angle with a drop of water of at least 120 degrees; and can maintain the contact angle when exposed to harsh conditions.

Tamper indicating gold nanocup plasmonic films

Energy Technology Data Exchange (ETDEWEB)

DeVetter, Brent M.; Bernacki, Bruce E.; Bennett, Wendy D.; Schemer-Kohrn, Alan; Alvine, Kyle J.

2017-02-13

The spectral signature of nanoplasmonic films are both robust and tailorable with optical responses ranging from the visible to the near-infrared. We present the development of flexible, elastomeric nanoplasmonic films consisting of periodic arrays of gold nanocups as tamper indicating films. Gold nanocups have polarization-sensitive optical properties that may be manufactured into films that offer unique advantages for tamper indication. These flexible films can be made quickly and at low-cost using commercially available monodisperse polystyrene nanospheres through self-assembly followed by plasma etching, metal deposition, and lift-off from a sacrificial substrate. Polarization- and angle-dependent optical spectroscopic measurements were performed to characterize the fabricated films. Using polarization-sensitive hyperspectral imaging, we demonstrate how these films can be applied to tamper indication and counterfeit resistance applications.

Josephson tunnel junctions in niobium films

International Nuclear Information System (INIS)

Wiik, Tapio.

1976-12-01

A method of fabricating stable Josephson tunnel junctions with reproducible characteristics is described. The junctions have a sandwich structure consisting of a vacuum evaporated niobium film, a niobium oxide layer produced by the glow discharge method and a lead film deposited by vacuum evaporation. Difficulties in producing thin-film Josephson junctions are discussed. Experimental results suggest that the lower critical field of the niobium film is the most essential parameter when evaluating the quality of these junctions. The dependence of the lower critical field on the film thickness and on the Ginzburg-Landau parameter of the film is studied analytically. Comparison with the properties of the evaporated films and with the previous calculations for bulk specimens shows that the presented model is applicable for most of the prepared samples. (author)

Regional Film Culture: Challenges and Problems.

Science.gov (United States)

Fountain, Alan

1978-01-01

Discusses the relationship between general film culture and state intervention through the formation of a regional film policy and the funding of film exhibition, film education, and filmmaking in Britain. Suggests ways in which intervention can perpetuate the dominant cultural ideology and ways to identify, resist, and challenge present…

Solvent annealing induced phase separation and dewetting in PMMA∕SAN blend film: film thickness and solvent dependence.

Science.gov (United States)

You, Jichun; Zhang, Shuangshuang; Huang, Gang; Shi, Tongfei; Li, Yongjin

2013-06-28

The competition between "dewetting" and "phase separation" behaviors in polymer blend films attracts significant attention in the last decade. The simultaneous phase separation and dewetting in PMMA∕SAN [poly(methyl methacrylate) and poly(styrene-ran-acrylonitrile)] blend ultrathin films upon solvent annealing have been observed for the first time in our previous work. In this work, film thickness and annealing solvent dependence of phase behaviors in this system has been investigated using atomic force microscopy and grazing incidence small-angle X-ray scattering (GISAXS). On one hand, both vertical phase separation and dewetting take place upon selective solvent vapor annealing, leading to the formation of droplet∕mimic-film structures with various sizes (depending on original film thickness). On the other hand, the whole blend film dewets the substrate and produces dispersed droplets on the silicon oxide upon common solvent annealing. GISAXS results demonstrate the phase separation in the big dewetted droplets resulted from the thicker film (39.8 nm). In contrast, no period structure is detected in small droplets from the thinner film (5.1 nm and 9.7 nm). This investigation indicates that dewetting and phase separation in PMMA∕SAN blend film upon solvent annealing depend crucially on the film thickness and the atmosphere during annealing.

Uus Sakala arhitektuurivõistlus = The Uus Sakala architectural competition / Panu Lehtovuori

Index Scriptorium Estoniae

Lehtovuori, Panu, 1968-

2003-01-01

Žürii liige konkursist: keskuse asukohast ja programmist, praeguse Sakala keskuse kasutamisest, konkursi tulemusest. Teise vooru valiti kolm projekti: võidutöö "Küpsis" (autorid Toomas Tammis, Inga Raukas, Tarmo Teedumäe, ArhitektuuriAgentuur), "Ocularis" (autorid Siiri Vallner, Indrek Peil), "Sõstrad" (autor Veronika Valk)

Film Sensor Device Fabricated by a Piezoelectric Poly(L-lactic acid) Film

Science.gov (United States)

Ando, Masamichi; Kawamura, Hideki; Kageyama, Keisuke; Tajitsu, Yoshiro

2012-09-01

Synthetic piezoelectric polymer films produced from petroleum feedstock have long been used as thin-film sensors and actuators. However, the fossil fuel requirements for synthetic polymer production and carbon dioxide emission from its combustion have raised concern about the environmental impact of its continued use. Eco-friendly biomass polymers, such as poly(L-lactic acid) (PLLA), are made from plant-based (vegetable starch) plastics and, thus, have a much smaller carbon footprint. Additionally, PLLA does not exhibit pyroelectricity or unnecessary poling. This suggests the usefulness of PLLA films for the human-machine interface (HMI). As an example of a new HMI, we have produced a TV remote control using a PLLA film. The intuitive operation provided by this PLLA device suggests that it is useful for the elderly or handicapped.

Organized organic ultrathin films fundamentals and applications

CERN Document Server

Ariga, Katsuhiko

2012-01-01

This handy reference is the first comprehensive book covering both fundamentals and recent developments in the field with an emphasis on nanotechnology. Written by a highly regarded author in the field, the book details state-of-the-art preparation, characterization and applications of thin films of organic molecules and biomaterials fabricated by wet processes and also highlights applications in nanotechnology The categories of films covered include monomolecular films (monolayers) both on a water surface and on a solid plate, Langmuir-Blodgett films (transferred multilayer films on a solid plate from a water surface), layer-by-layer films (adsorbed multilayer films on a solid support), and spontaneously assembled films in solution.

Film-based dual energy radiography

International Nuclear Information System (INIS)

Sandrik, J. M.; Pelc, N. J.

1985-01-01

X-ray energy-difference images are obtained simultaneously by exposing a body to a broad energy spectrum X-ray beam while a radiographic film package is disposed between front and rear X-ray intensifying screens. The film package has two superimposed films with a light-opaque sheet between them. The front screen, on which the polyenergetic image beam emerging from the body is incident, is excited to luminescence by X-ray photons predominantly in one energy band and the rear screen is excited predominantly by photons in another band. The light opaque sheet preferably contains X-ray filter material for additional filtering of photons to increase the fraction of protons at said other band to which the rear screen is sensitive. A shadowgraph of a marker is formed on the film emulsions during X-ray exposure to aid in matching congruent picture elements on each film when the developed films are being read out to obtain signals corresponding to their intensities. Notches in the edges of the films and sheet serve as a code for indicating the type of screens with which the package can be used

Passivation Effects in Copper Thin Films

International Nuclear Information System (INIS)

Wiederhirn, G.; Nucci, J.; Richter, G.; Arzt, E.; Balk, T. J.; Dehm, G.

2006-01-01

We studied the influence of a 10 nm AlxOy passivation on the stress-temperature behavior of 100 nm and 1 μm thick Cu films. At low temperatures, the passivation induces a large tensile stress increase in the 100 nm film; however, its effect on the 1 μm film is negligible. At high temperatures, the opposite behavior is observed; while the passivation does not change the 100 nm film behavior, it strengthens the 1 μm film by driving it deeper into compression. These observations are explained in light of a combination of constrained diffusional creep and dislocation dynamics unique to ultra-thin films

Are Wildlife Films Really "Nature Documentaries"?

Science.gov (United States)

Bouse, Derek

1998-01-01

Examines origins of wildlife films. Outlines their tension between education and entertainment. Looks at how Disney codified wildlife films as a coherent genre by imposing conventionalized narrative frameworks upon them. Discusses factors influencing wildlife television in the 1990s. Concludes that wildlife films are a valid and distinct film and…

In and Ga Codoped ZnO Film as a Front Electrode for Thin Film Silicon Solar Cells

Directory of Open Access Journals (Sweden)

Duy Phong Pham

2014-01-01

Full Text Available Doped ZnO thin films have attracted much attention in the research community as front-contact transparent conducting electrodes in thin film silicon solar cells. The prerequisite in both low resistivity and high transmittance in visible and near-infrared region for hydrogenated microcrystalline or amorphous/microcrystalline tandem thin film silicon solar cells has promoted further improvements of this material. In this work, we propose the combination of major Ga and minor In impurities codoped in ZnO film (IGZO to improve the film optoelectronic properties. A wide range of Ga and In contents in sputtering targets was explored to find optimum optical and electrical properties of deposited films. The results show that an appropriate combination of In and Ga atoms in ZnO material, followed by in-air thermal annealing process, can enhance the crystallization, conductivity, and transmittance of IGZO thin films, which can be well used as front-contact electrodes in thin film silicon solar cells.

Equivalent-circuit model for the thickness-shear mode resonator with a viscoelastic film near film resonance.

Science.gov (United States)

Martin, S J; Bandey, H L; Cernosek, R W; Hillman, A R; Brown, M J

2000-01-01

We derive a lumped-element, equivalent-circuit model for the thickness-shear mode (TSM) resonator with a viscoelastic film. This modified Butterworth-Van Dyke model includes in the motional branch a series LCR resonator, representing the quartz resonance, and a parallel LCR resonator, representing the film resonance. This model is valid in the vicinity of film resonance, which occurs when the acoustic phase shift across the film is an odd multiple of pi/2 rad. For low-loss films, this model accurately predicts the frequency changes and damping that arise at resonance and is a reasonable approximation away from resonance. Elements of the parallel LCR resonator are explicitly related to film properties and can be interpreted in terms of elastic energy storage and viscous power dissipation. The model leads to a simple graphical interpretation of the coupling between the quartz and film resonances and facilitates understanding of the resulting responses. These responses are compared with predictions from the transmission-line and Sauerbrey models.

Populizm dvadtsat pervogo veka / Roberto Lasserna

Index Scriptorium Estoniae

Lasserna, Roberto

2007-01-01

Venezuelas, Boliivias ja Ecuadoris on tekkimas uus poliitiline liikumine, mida nende maade presidendid nimetavad 21. sajandi sotsialismiks, mis tegelikkuses ei erine milleski 20. sajandi sotsialismist

Low-Concentration Indium Doping in Solution-Processed Zinc Oxide Films for Thin-Film Transistors

Directory of Open Access Journals (Sweden)

Xue Zhang

2017-07-01

Full Text Available We investigated the influence of low-concentration indium (In doping on the chemical and structural properties of solution-processed zinc oxide (ZnO films and the electrical characteristics of bottom-gate/top-contact In-doped ZnO thin-film transistors (TFTs. The thermogravimetry and differential scanning calorimetry analysis results showed that thermal annealing at 400 °C for 40 min produces In-doped ZnO films. As the In content of ZnO films was increased from 1% to 9%, the metal-oxygen bonding increased from 5.56% to 71.33%, while the metal-hydroxyl bonding decreased from 72.03% to 9.63%. The X-ray diffraction peaks and field-emission scanning microscope images of the ZnO films with different In concentrations revealed a better crystalline quality and reduced grain size of the solution-processed ZnO thin films. The thickness of the In-doped ZnO films also increased when the In content was increased up to 5%; however, the thickness decreased on further increasing the In content. The field-effect mobility and on/off current ratio of In-doped ZnO TFTs were notably affected by any change in the In concentration. Considering the overall TFT performance, the optimal In doping concentration in the solution-processed ZnO semiconductor was determined to be 5% in this study. These results suggest that low-concentration In incorporation is crucial for modulating the morphological characteristics of solution-processed ZnO thin films and the TFT performance.

Boleslas Matuszewski: Pioneer of medical film-making

Directory of Open Access Journals (Sweden)

Matanović Dragana

2005-01-01

Full Text Available Boleslas Matuszewski, born in 1856, was a pioneer in medical film-making. He worked simultaneously on improving his movie camera, film-making, collecting film documentation, and the idea of establishing an archive of medical films. Although his first attempts at filming and showing surgical operations didn't gain widespread approval, he was not discouraged, and succeeded in garnering support from a number of French doctors, who realized the importance of his ideas, not only in filming and forming medical film documentation, but also in the use of film for educative purposes. His visionary ideas gained acceptance when Dr. Doyen, on the occasion of the 66th Convention of the British Medical Society, in 1898, used film material as part of his lecture. Shortly afterwards, the Medical Academy took steps to show certain operative techniques, which represented both the confirmation and fruition of Matuszewski's ideas about filmmaking and the establishment of an archive of medical films.

Spray pyrolysis process for preparing superconductive films

International Nuclear Information System (INIS)

Hsu, H.M.; Yee, I.Y.

1991-01-01

This paper describes a spray pyrolysis method for preparing thin superconductive film. It comprises: preparing a spray pyrolysis solution comprising Bi,Sr,Ca and Cu metals in a solvent; heating a substrate to a first temperature; spraying the solution onto the heated substrate to form a film thereon; heating the film and substrate to a second temperature of about 700 degrees-825 degrees C, the second temperature being higher than the first temperature; heating the film and substrate to a third temperature of about 870 degrees-890 degrees C to melt the film; once the film and substrate reach the third temperature, further heat treating the film and substrate; cooling the film and substrate to ambient temperature. This patent also describes a spray pyrolysis method for preparing thin superconductive films. It comprises: preparing a spray pyrolysis solution comprising Bi, Ca and Cu metals and fluxing agent in a solvent; heating a substrate to a first temperature; spraying the solution onto the heated substrate to form a film thereon; heating the film and substrate to a second temperature about 700 degrees-825 degrees C, the second temperature being higher than the first temperature; heating the film and substrate at a third temperature about 840 degrees-860 degrees C; and cooling the film and substrate to ambient temperature

The Harvard Project Physics Film Program

Science.gov (United States)

Bork, Alfred M.

1970-01-01

States the philosophy behind the Harvard Project Physics (HPP) film program. Describes the three long HPP films. Lists the 48 color film loops covering six broad topics, primarily motion and energy. The 8-mm silent loops are synchronized with the text materials. Explains some of the pedagogical possibilities of these film loops. (RR)

Scoring an Abstract Contemporary Silent Film

OpenAIRE

Frost, Crystal

2014-01-01

I composed an original digital audio film score with full sound design for a contemporary silent film called Apple Tree. The film is highly conceptual and interpretive and required a very involved, intricate score to successfully tell the story. In the process of scoring this film, I learned new ways to convey an array of contrasting emotions through music and sound. After analyzing the film's emotional journey, I determined that six defining emotions were the foundation on which to build an ...

Laser micromachining of sputtered DLC films

International Nuclear Information System (INIS)

Fu, Y.Q.; Luo, J.K.; Flewitt, A.J.; Ong, S.E.; Zhang, S.; Milne, W.I.

2006-01-01

DLC films with different thicknesses (from 100 nm to 1.9 μm) were deposited using sputtering of graphite target in pure argon atmosphere without substrate heating. Film microstructures (sp 2 /sp 3 ratio) and mechanical properties (modulus, hardness, stress) were characterized as a function of film thickness. A thin layer of aluminum about 60 nm was deposited on the DLC film surface. Laser micromachining of Al/DLC layer was performed to form microcantilever structures, which were released using a reactive ion etching system with SF 6 plasma. Due to the intrinsic stress in DLC films and bimorph Al/DLC structure, the microcantilevers bent up with different curvatures. For DLC film of 100 nm thick, the cantilever even formed microtubes. The relationship between the bimorph beam bending and DLC film properties (such as stress, modulus, etc.) were discussed in details

Alloying behaviour of electroplated Ag film with its underlying Pd/Ti film stack for low resistivity interconnect metallization

International Nuclear Information System (INIS)

Ezawa, Hirokazu; Miyata, Masahiro; Tatsumi, Kohei

2014-01-01

Highlights: • Alloying behavior of Ag/Pd/Ti film stack was studied by annealing at 400-800 °C. • The Ag film resistivity decreased with increasing annealing temperature. • Formation of the Pd-Ti intermetallics was found to be dominant over Ag-Pd alloying. • The excess Ti was consumed to form Ti oxides, which inhibited Ti alloying with Ag. -- Abstract: In this paper, viability of electroplated Ag film into device application was studied. Alloying behavior of the Ag film with its underlying Pd(50 nm)/Ti(100 nm) film stack was investigated with respect to heat treatment at different temperatures from 400 °C to 800 °C in an argon ambient. After annealing at 400 °C, the electrical resistivity of the Ag film increased due to Pd alloying with Ag. Formation of Pd–Ti intermetallic phases became dominant over Ag–Pd alloying with increasing annealing temperature, leading to the resistivity decrease of the Ag film. The resistivity of the 800 °C annealed Ag film approached that of its as-plated Ag film. The excess Ti atoms which were not consumed to form the intermetallic phases with the Pd atoms migrated to the Ag film surface to form Ti oxides along the Ag grain boundaries on the topmost film surface. The Ag/Pd/Ti film stack has been confirmed to maintain the resistivity of the Ag film at as-plated low levels after high temperature annealing. This paper also discusses process integration issues to enable the Ag metallization process for future scaled and three dimensionally chip stacked devices

A Controlled Study on the Correlation between Tear Film Volume and Tear Film Stability in Diabetic Patients.

Science.gov (United States)

Eissa, Iman M; Khalil, Noha M; El-Gendy, Heba A

2016-01-01

Purpose. To assess the tear film quantity and correlate it with the quality and stability of the tear film in diabetics and compare them to age matched controls. Introduction. Diabetes affects tear film parameters in multiple ways. Poor metabolic control and neuropathy are postulated factors. To further understand how diabetes affects tear film parameters this study was conducted. Subjects and Methods. Tear meniscus height was measured by anterior segment OCT, along with tear thinning time, a subtype of noninvasive tear break-up time, and blinking rate per minute which were all recorded for 22 diabetic patients. Correlations between these tear film parameters were studied and then compared to 16 age matched controls. Results. A statistically significant difference was found in blinking rate between the diabetic and the control group (P = 0.002), with higher blinking rate among diabetics. All tear film parameters were negatively correlated with duration of diabetes. A positive correlation was found between tear film volume and stability. Conclusion. Diabetes affects the tear film in various ways. Diabetics should be examined for dry eye signs even in absence of symptoms which may be masked by associated neuropathy. Duration of diabetes has an impact on tear film status.

Korea boikoteerib Bondi-filmi / Andres Mäe

Index Scriptorium Estoniae

Mäe, Andres

2003-01-01

Mängufilm "007 : Surra veel üks päev" ("Die Another Day") : režissöör Lee Tamahori : Ameerika Ühendriigid - Suurbritannia 2002. Filmi süzhees nägid nii Põhja- kui Lõuna-Korea oma riigi laimamist

Properties of sericin films crosslinking with dimethylolurea

International Nuclear Information System (INIS)

Turbiani, Franciele R.B.; Stroher, Gylles Ricardo; Tomadon Junior, Jose; Seixas, Fernanda L.; Stroher, Gylles Ricardo; Gimenes, Marcelino L.

2011-01-01

Sericin is a natural silk protein which is removed from silk in a process called degumming. Thus, finding a use for the extracted sericin as a bio polymer film will create added value product which will benefit both the economy and society. The films were manufactured with silk sericin, using different dimethylolurea (DMU) concentrations as cross-linking agent and glycerol as plasticizer. Sericin films produced by crosslinking method were light yellow, homogeneous, transparent and visually attractive. The average film thickness was 0.10 ± 0.02 mm. The bio films show low water solubility (up to 30% of total dry mass), good tension strength and high elongation ability. The water vapor permeability is moderate, typical of highly hydrophilic films. Structural transformations in silk sericin films were analyzed using Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy and X-ray diffraction. This resulted in aggregated β-sheet structure (peak at 1616 cm-1 in the amide I absorption) by FTIR studies and increasing the DMU concentration in film decreased the peak intensity at 2θ = 20 degree. Sericin-based film properties are dependent on components used to form film, which can used to tailor the desired film flexibility and minimize permeability of films. (author)

Properties of sericin films crosslinking with dimethylolurea

Energy Technology Data Exchange (ETDEWEB)

Turbiani, Franciele R.B.; Stroher, Gylles Ricardo [Federal Technology University - UTFPR, Campus Apucarana, PR (Brazil); Tomadon, Junior, Jose; Seixas, Fernanda L; Stroher, Gylles Ricardo; Gimenes, Marcelino L., E-mail: francieler@utfpr.edu.br [State University of Maringa. UEM, Campus Maringa, PR (Brazil)

2011-07-01

Sericin is a natural silk protein which is removed from silk in a process called degumming. Thus, finding a use for the extracted sericin as a bio polymer film will create added value product which will benefit both the economy and society. The films were manufactured with silk sericin, using different dimethylolurea (DMU) concentrations as cross-linking agent and glycerol as plasticizer. Sericin films produced by crosslinking method were light yellow, homogeneous, transparent and visually attractive. The average film thickness was 0.10 {+-} 0.02 mm. The bio films show low water solubility (up to 30% of total dry mass), good tension strength and high elongation ability. The water vapor permeability is moderate, typical of highly hydrophilic films. Structural transformations in silk sericin films were analyzed using Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy and X-ray diffraction. This resulted in aggregated {beta}-sheet structure (peak at 1616 cm-1 in the amide I absorption) by FTIR studies and increasing the DMU concentration in film decreased the peak intensity at 2{theta} = 20 degree. Sericin-based film properties are dependent on components used to form film, which can used to tailor the desired film flexibility and minimize permeability of films. (author)

Film documentaire, lecture documentarisante

Directory of Open Access Journals (Sweden)

Roger Odin

2012-06-01

Full Text Available Réfléchir sur la relation entre le cinéma et la réalité n’est pas, bien sûr, tenter de distinguer l’espace du documentaire de celui de la fiction, au point que l’opposition avec le film de fiction est devenu le critère de définition privilégié du film documentaire. Prenant acte l’existence, dans le espace de la lecture des films, d’une lecture documentaire ou, plus exactement, d’une lecture documentarisante, nous pensons qu’il y a un ensemble de films que s’affiche comme documentaire (tout le problème est précisément étudier comment s’effetue cet affichage.

Thin films and nanomaterials

International Nuclear Information System (INIS)

Jayakumar, S.; Kannan, M.D.; Prasanna, S.

2012-01-01

The objective of this book is to disseminate the most recent research in Thin Films, Nanomaterials, Corrosion and Metallurgy presented at the International Conference on Advanced Materials (ICAM 2011) held in PSG College of Technology, Coimbatore, India during 12-16 December 2011. The book is a compilation of 113 chapters written by active researchers providing information and critical insights into the recent advancements that have taken place. Important new applications are possible today in the fields of microelectronics, opto-electronics, metallurgy and energy by the application of thin films on solid surfaces. Recent progress in high vacuum technology and new materials has a remarkable effect in thin film quality and cost. This has led to the development of new single or multi-layered thin film devices with diverse applications in a multitude of production areas, such as optics, thermal barrier coatings and wear protections, enhancing service life of tools and to protect materials against thermal and atmospheric influence. On the other hand, thin film process techniques and research are strongly related to the basic research activities in nano technology, an increasingly important field with countless opportunities for applications due to the emergence of new properties at the nanoscale level. Materials and structures that are designed and fabricated at the nano scale level, offer the potential to produce new devices and processes that may enhance efficiencies and reduce costs in many areas, as photovoltaic systems, hydrogen storage, fuel cells and solar thermal systems. In the book, the contributed papers are classified under two sections i) thin films and ii) nanomaterials. The thin film section includes single or multi layer conducting, insulating or semiconducting films synthesized by a wide variety of physical or chemical techniques and characterized or analyzed for different applications. The nanomaterials section deals with novel or exciting materials

Thin diamond films for tribological applications

International Nuclear Information System (INIS)

Wong, M.S.; Meilunas, R.; Ong, T.P.; Chang, R.P.H.

1989-01-01

Diamond films have been deposited on Si, Mo and many other substrates by microwave and radio frequency plasma enhanced chemical vapor deposition. Although the adhesion between the diamond film and most of the metal substrates is poor due to residual thermal stress from the mismatch of thermal expansion coefficients, the authors have developed processes to promote the growth of uniform and continuous diamond films with enhanced adhesion to metal substrates for tribological applications. The tribological properties of these films are measured using a ring-on-block tribotester. The coefficients of friction of diamond films sliding against a 52100 steel ring under the same experimental conditions are found to be significantly different depending on the morphology, grain size and roughness of the diamond films. However, under all cases tested, it is found that for uniform and continuous diamond films with small grain size of 1-3 micrometers, the coefficient of friction of the diamond film sliding against a steel ring under lubrication of a jet of mineral oil is about 0.04

Filme autosuportado de polianilina desdopada para aplicações anticorrosivas Characterization of self-standing films of undoped polyanilina

Directory of Open Access Journals (Sweden)

Rodrigo S. Silva

2012-01-01

Full Text Available Os polímeros intrinsecamente condutores (PIC, como a polianilina (PAni, têm sido estudados com alternativa em filmes protetores de metais oxidáveis contra a corrosão. Dada a dificuldade de fusão ou dissolução da PAni para a produção de filmes, investigou-se a possibilidade de obter filmes pela mistura de PAni no estado oxidado e desdopado, conhecida como base esmeraldina, com plastificante não dopante 4-cloro-3-metilfenol (CMF e solvente conveniente. Filmes produzidos desta forma foram caracterizados por espectroscopia FTIR e RAMAN, por TGA e ensaio de voltametria cíclica. A caracterização mostrou filmes termicamente estáveis até a temperatura de 200 ºC com indícios de interação da PAni com o CMF, com a PAni se mantendo no estado oxidado no filme produzido, condição necessária para futura aplicação como filme anticorrosivo de proteção anódica.The intrinsically conductive polymers (PCI, such as polyaniline (PAni, have been studied as an alternative in the development of protective films of oxidizable metals against corrosion. Given the difficulty of mixing and dissolving PAni for the production of films, here we investigated the possibility of obtaining a mixture of PAni films in the oxidized, undoped state, referred to as emeraldine base, with the non-doping plasticizer 4-chloro-3-methylphenol (CMF and a convenient solvent. Films produced in this way were characterized by FTIR and Raman spectroscopy, TGA and cyclic voltammetry. The characterization showed films thermally stable up to 200 ºC with evidence of interaction between PAni and CMF, with PAni remaining in the oxidized state in the film produced, which a necessary condition for application as anodic protection in anticorrosion films.

Film dosimetry for IMRT: sensitivity corrections

International Nuclear Information System (INIS)

Suchowerska, N.; Hoban, P.; Davison, A.; Metcalfe, P.

2000-01-01

Full text: The trend towards conformal, dynamic and intensity modulated radiotherapy treatments has furthered the need for true integrating dosimetry. In traditional radiotherapy, film dosimetry is commonly used. The accuracy and reproducibility of film optical density as an indicator of dose, has been associated with several variables. These include the effects of film specific sensitivity, direction of exposure, chemical processing and film scanner sensitivity. In this study, a procedure is developed to account for these variables, with a particular view to film being used as a dosimeter for conformal treatments. An effective sensitometric curve was established by exposing part of a single sheet of film to known doses. All films were processed together and scanned using a DuoscanT1200 transmission scanner, resulting in 12 bit image files. The images were analysed using Osiris software and the results fitted to the modified Williamson equation: P P s (l - 10 αD ) This yields values of α [film sensitivity], and P s [saturation pixel value], allowing individual dosimetry films to be normalised to this sensitometric calibration curve. For validation, a piece of Kodak X Omat-V film was sealed in a head phantom and exposed to a total of 51 IMRT fields, delivered from 6 gantry angles. The rest of the sheet of film was resealed and exposed to four known doses, providing sensitometric data, specific to this exposure. All films were then processed, scanned and analysed as described above. Observed variations in serial films exposed to 50cGy is in the order of 9% [mean 25.0,standard deviation = 3.2]. The automatic gain of the scanner system typically contributed 4% variation and needs to be carefully monitored. Results indicate that by using the sensitometric data from each exposure, the collective errors can be minimised. The IMRT exposure results confirm that the above process is viable for use in dosimetry for conformal radiation therapy. Copyright (2000) Australasian

FAA Film Catalog.

Science.gov (United States)

Federal Aviation Administration (DOT), Washington, DC.

Some 75 films from the U.S. Department of Transportation's Federal Aviation Administration are listed in this catalog. Topics dealt with include aerodynamics, airports, aviation history and careers, flying clubs, navigation and weather. Most of the films are 16mm sound and color productions. Filmstrips requiring a 35mm projector and phonograph or…

Relaxation in Thin Polymer Films Mapped across the Film Thickness by Astigmatic Single-Molecule Imaging

KAUST Repository

Oba, Tatsuya

2012-06-19

We have studied relaxation processes in thin supported films of poly(methyl acrylate) at the temperature corresponding to 13 K above the glass transition by monitoring the reorientation of single perylenediimide molecules doped into the films. The axial position of the dye molecules across the thickness of the film was determined with a resolution of 12 nm by analyzing astigmatic fluorescence images. The average relaxation times of the rotating molecules do not depend on the overall thickness of the film between 20 and 110 nm. The relaxation times also do not show any dependence on the axial position within the films for the film thickness between 70 and 110 nm. In addition to the rotating molecules we observed a fraction of spatially diffusing molecules and completely immobile molecules. These molecules indicate the presence of thin (<5 nm) high-mobility surface layer and low-mobility layer at the interface with the substrate. (Figure presented) © 2012 American Chemical Society.

Scalable Production of Mechanically Robust Antireflection Film for Omnidirectional Enhanced Flexible Thin Film Solar Cells.

Science.gov (United States)

Wang, Min; Ma, Pengsha; Yin, Min; Lu, Linfeng; Lin, Yinyue; Chen, Xiaoyuan; Jia, Wei; Cao, Xinmin; Chang, Paichun; Li, Dongdong

2017-09-01

Antireflection (AR) at the interface between the air and incident window material is paramount to boost the performance of photovoltaic devices. 3D nanostructures have attracted tremendous interest to reduce reflection, while the structure is vulnerable to the harsh outdoor environment. Thus the AR film with improved mechanical property is desirable in an industrial application. Herein, a scalable production of flexible AR films is proposed with microsized structures by roll-to-roll imprinting process, which possesses hydrophobic property and much improved robustness. The AR films can be potentially used for a wide range of photovoltaic devices whether based on rigid or flexible substrates. As a demonstration, the AR films are integrated with commercial Si-based triple-junction thin film solar cells. The AR film works as an effective tool to control the light travel path and utilize the light inward more efficiently by exciting hybrid optical modes, which results in a broadband and omnidirectional enhanced performance.

Technical Note: Homogeneity of Gafchromic EBT2 film

International Nuclear Information System (INIS)

Hartmann, Bernadette; Martisikova, Maria; Jaekel, Oliver

2010-01-01

Purpose: The self-developing Gafchromic EBT film is a radiochromic film, widely used for relative photon dosimetry. Recently, the manufacturer has replaced the well-investigated EBT film by the new Gafchromic EBT2 film. It has the same sensitive component and, in addition, it contains a yellow marker dye in order to protect the film against ambient light exposure and to serve as a base for corrections of small differences in film response. Furthermore, the configuration of the film layers as well as the binder material have been changed in comparison to the EBT film. When investigating the properties of EBT2 film, all characteristics were found to be similar to those of EBT film, except for the film response homogeneity. Thus, in this article special focus was put on examining the homogeneity of EBT2 film. Methods: A scan protocol established for EBT film and published previously was used. The uniformity of the film coloration was investigated for unirradiated and irradiated EBT2 film sheets. The dose response of EBT2 film was measured and the influence of film inhomogeneities on dose determination was evaluated. Results: Inhomogeneities in pixel values of up to ±3.7% within one film were detected. The relative inhomogeneities were found to be approximately independent of the dose. Nonuniformities of the film response lead to uncertainties in dose determination of ±8.7% at 1 Gy. When using net optical densities for dose calibration, uncertainties in dose determination amount to more than ±6%. Conclusions: EBT2 films from the lot investigated in this study show response inhomogeneities, which lead to uncertainties in dose determination exceeding the commonly accepted tolerance levels. It is important to test further EBT2 lots regarding homogeneity before using the film in clinical routine.

Giant magnetoimpedance effect in sputtered single layered NiFe film and meander NiFe/Cu/NiFe film

International Nuclear Information System (INIS)

Chen, L.; Zhou, Y.; Lei, C.; Zhou, Z.M.; Ding, W.

2010-01-01

Giant magnetoimpedance (GMI) effect on NiFe thin film is very promising due to its application in developing the magnetic field sensors with highly sensitivity and low cost. In this paper, the single layered NiFe thin film and NiFe/Cu/NiFe thin film with a meander structure are prepared by the MEMS technology. The influences of sputtering parameters, film structure and conductor layer width on GMI effect in NiFe single layer and meander NiFe/Cu/NiFe film are investigated. Maximum of the GMI ratio in single layer and sandwich film is 5% and 64%, respectively. The results obtained are useful for developing the high-performance magnetic sensors based on NiFe thin film.

16 CFR 501.1 - Camera film.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Camera film. 501.1 Section 501.1 Commercial... 500 § 501.1 Camera film. Camera film packaged and labeled for retail sale is exempt from the net... should be expressed, provided: (a) The net quantity of contents on packages of movie film and bulk still...

Partnervalg på film

DEFF Research Database (Denmark)

Kramer, Mette

2006-01-01

Nye kognitions- og evolutionspsykologiske aspekter på kvinders filmpræferencer for romantiske film og melodramer......Nye kognitions- og evolutionspsykologiske aspekter på kvinders filmpræferencer for romantiske film og melodramer...

The Art of Teaching Social Studies with Film

Science.gov (United States)

Russell, William B., III

2012-01-01

Teaching with film is a powerful and meaningful instructional strategy. This article discusses five classroom-tested methods for teaching with film: (1) film as a visual textbook, (2) film as a depicter of atmosphere, (3) film as an analogy, (4) film as a historiography, and (5) film as a springboard. Each of the methods discussed includes…

Hispaania võib oma väed Iraagist ära tuua / Erkki Bahovski

Index Scriptorium Estoniae

Bahovski, Erkki, 1970-

2004-01-01

Hispaania parlamendivalimised võitnud sotsialistliku partei liider, arvatav uus peaminister Jose Luis Rodriguez Zapatero lubas Hispaania väed Iraagist ära tuua. Diagrammid: Hispaania valimistulemused

Turvalisus - meie kõigi õigus ja kohustus / Marek Helm

Index Scriptorium Estoniae

Helm, Marek, 1973-

2007-01-01

Siseministeeriumis on alustatud siseturvalisuse arengukava koostamist, mis tähendab, et uus valitsus tahab oma koalitsioonilepingus kriminaalpoliitika arengusuundadele lisaks heaks kiita Eesti turvalisuspoliitika arengusuunad aastani 2015

Rüütel kutsus Ansipi, Savisaare js Reiljani Kadriorgu

Index Scriptorium Estoniae

2005-01-01

President Arnold Rüütel kutsus Kadriorgu kolm erakonnajuhti, kes teatasid valmisolekust moodustada uus koalitsioon. Uue koalitsiooni peaministrikandidaadina näevad nad Reformierakonna esimeest Andrus Ansipit

Finance minister resigns amid fraud probe / Aleksei Gunter

Index Scriptorium Estoniae

Gunter, Aleksei, 1979-

2003-01-01

Rahandusminister Tõnis Paltsi tagasiastumisest. Uus kandidaat rahandusministri ametikohale on Res Publica parlamendifraktsiooni esimees ja rahanduskomisjoni liige Taavi Veskimägi. Kommentaarid Pakterminali juhatuse esimehelt Aadu Luukaselt

DC magnetron sputtering prepared Ag-C thin film anode for thin film lithium ion microbatteries

International Nuclear Information System (INIS)

Li, Y.; Tu, J.P.; Shi, D.Q.; Huang, X.H.; Wu, H.M.; Yuan, Y.F.; Zhao, X.B.

2007-01-01

An Ag-C thin film was prepared by DC magnetron co-sputtering, using pure silver and graphite as the targets. The microstructure and morphology of the deposited thin film were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Electrochemical performances of the Ag-C thin film anode were investigated by means of discharge/charge and cyclic voltammogram (CV) tests in model cells. The electrochemical impedance spectrum (EIS) characteristics and the chemical diffusion coefficient, D Li of the Ag-C thin film electrode at different discharging states were discussed. It was believed that the excellent cycling performance of the Ag-C electrode was ascribed to the good conductivity of silver and the volume stability of the thin film

Passive films at the nanoscale

International Nuclear Information System (INIS)

Maurice, Vincent; Marcus, Philippe

2012-01-01

Highlights: ► Nanoscale data on growth, structure and local properties of passive films reviewed. ► Preferential role of defects of passive films on the corrosion resistance emphasized. ► Effect of grain boundaries on local electronic properties shown by new data. ► Use of atomistic modeling to test mechanistic hypotheses illustrated. - Abstract: The nanometer scale chemical and structural aspects of ultrathin oxide passive films providing self-protection against corrosion to metals and alloys in aqueous environments are reviewed. Data on the nucleation and growth of 2D anodic oxide films, details on the atomic structure and nanostructure of 3D passive films, the preferential role of surface step edges in dissolution in the passive state and the preferential role of grain boundaries of the passive films in passivity breakdown are presented. Future perspectives are discussed, and exemplified by new data obtained on the relationship between the nanostructure of oxide passive films and their local electronic properties. Atomistic corrosion modeling by ab initio density functional theory (DFT) is illustrated by the example of interactions of chloride ions with hydroxylated oxide surfaces, including the role of surface step edges. Data obtained on well-defined substrate surfaces with surface analytical techniques are emphasized.

Computational simulation of radiographic film

International Nuclear Information System (INIS)

Goncalves, Elicardo A. de S.; Santos, Marcio H. dos; Anjos, Marcelino J.; Oliveira, Luis F. de

2013-01-01

The composition of a radiographic film gives its values of speed, spatial resolution and base density. The technical knowledge allows to predict how a film with a known composition works, and simulate how this film will work with changes in composition and exposure. In this paper, characterization of films composed by different emulsions was realized, in a way to know the characteristic curve, and to study how the format, organization and concentration of silver salt crystals set the radiographic film images.This work aims to increase an existing simulator, where parallel programming was used to simulate X-ray fluorescence processes. The setup of source and X-ray interactions with objects stills the same, and the detector constructed in this work was placed to form images. At first, considering the approach that the film is a square matrix where each element has a specific quantity of silver grains, that each grain fills a specific area, and that each interaction to radiation transforms a salt silver grain in to metallic silver grain (black grain), we have a blackening standard, and it should show how is the behavior of a optic density in a specific area of the film. Each matrix element has a degree of blackening, and it is proportional to the black grains area. (author)

Condom Use and High-Risk Sexual Acts in Adult Films: A Comparison of Heterosexual and Homosexual Films

Science.gov (United States)

Elliott, Marc N.; Kerndt, Peter R.; Schuster, Mark A.; Brook, Robert H.; Gelberg, Lillian

2009-01-01

Objectives. We compared the prevalence of condom use during a variety of sexual acts portrayed in adult films produced for heterosexual and homosexual audiences to assess compliance with state Occupational Health and Safety Administration regulations. Methods. We analyzed 50 heterosexual and 50 male homosexual films released between August 1, 2005, and July 31, 2006, randomly selected from the distributor of 85% of the heterosexual adult films released each year in the United States. Results. Penile–vaginal intercourse was protected with condoms in 3% of heterosexual scenes. Penile–anal intercourse, common in both heterosexual (42%) and homosexual (80%) scenes, was much less likely to be protected with condoms in heterosexual than in homosexual scenes (10% vs 78%; P films. Conclusions. Heterosexual films were much less likely than were homosexual films to portray condom use, raising concerns about transmission of HIV and other sexually transmitted diseases, especially among performers in heterosexual adult films. In addition, the adult film industry, especially the heterosexual industry, is not adhering to state occupational safety regulations. PMID:19218178

Oxygen diffusion in bilayer polymer films

DEFF Research Database (Denmark)

Poulsen, Lars; Zebger, Ingo; Tofte, Jannik Pentti

2004-01-01

Experiments to quantify oxygen diffusion have been performed on polymer samples in which a film of poly(ethylene-co-norbornene) was cast onto a film of polystyrene which, in turn, was cast onto an oxygen-impermeable substrate. In the technique employed, the time evolution of oxygen transport...... through the film of poly(ethylene-co-norbornene) and into the polystyrene film was monitored using the phosphorescence of singlet oxygen as a spectroscopic probe. To analyze the data, it was necessary to solve Fick's second law of diffusion for both polymer films. Tractable analytical and numerical...

Marangoni elasticity of flowing soap films

Science.gov (United States)

Kim, Ildoo; Mandre, Shreyas

2017-08-01

We measure the Marangoni elasticity of a flowing soap film to be 22 mN/m irrespective of its width, thickness, flow speed, or the bulk soap concentration. We perform this measurement by generating an oblique shock in the soap film and measuring the shock angle, flow speed, and thickness. We postulate that the elasticity is constant because the film surface is crowded with soap molecules. Our method allows nondestructive measurement of flowing soap film elasticity and the value 22 mN/m is likely applicable to other similarly constructed flowing soap films.

PP/clay nanocomposite films for food package; Filmes de nanocomposito PP/argila organofilica para embalagens de alimentos

Energy Technology Data Exchange (ETDEWEB)

Araujo, Arthur R.A.; Silva, Suedina M.L., E-mail: suedina@dema.ufcg.ed [Universidade Federal de Campina Grande (UAEMat/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Andrade, Daniela L.A.C.S. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos-Graduacao em Engenharia de Processos; Mesquita, Wandemberg B [Felinto Industria e Comercio Ltda., Campina Grande, PB (Brazil)

2009-07-01

Small contents of organoclays (1 wt %) were incorporated to PP modified with maleic anhydride by melt intercalation, in order to prepare polymeric films for further applications in food package sector. The films were characterized by X-ray diffraction (XRD) and mechanical properties. The data indicates that the incorporation of organoclay to PP results in transparent films with intercalated morphology and highly. The mechanical properties of nanocomposites films were superior from those pristine films. The results evidences that the PP/PP-g-MA/organoclay nanocomposite films, prepared in this study might be promissory to the food package market and, in short time, be used like a new product by industries of this sector. (author)

Simultaneous measurements of top surface and its underlying film surfaces in multilayer film structure.

Science.gov (United States)

Ghim, Young-Sik; Rhee, Hyug-Gyo; Davies, Angela

2017-09-19

With the growth of 3D packaging technology and the development of flexible, transparent electrodes, the use of multilayer thin-films is steadily increasing throughout high-tech industries including semiconductor, flat panel display, and solar photovoltaic industries. Also, this in turn leads to an increase in industrial demands for inspection of internal analysis. However, there still remain many technical limitations to overcome for measurement of the internal structure of the specimen without damage. In this paper, we propose an innovative optical inspection technique for simultaneous measurements of the surface and film thickness corresponding to each layer of multilayer film structures by computing the phase and reflectance over a wide range of wavelengths. For verification of our proposed method, the sample specimen of multilayer films was fabricated via photolithography process, and the surface profile and film thickness of each layer were measured by two different techniques of a stylus profilometer and an ellipsometer, respectively. Comparison results shows that our proposed technique enables simultaneous measurements of the top surface and its underlying film surfaces with high precision, which could not be measured by conventional non-destructive methods.

Film-screen digital radiography

International Nuclear Information System (INIS)

Schwenker, R.P.; Eger, H.

1985-01-01

The excellent performance of the digital film-screen system as a receptor for projection radiographic data is discussed. An experimental system for obtaining high quality digital radiographic data by laser scanning radiographic films is described. This system is being used to evaluate the clinical utility of various digital image processing algorithms. Future plans include an investigation of quantitative analysis of projection radiographic data. Digital data obtained by film scanning can be used with digital image archiving and communications systems. (author)

The microjet-film interaction: the interaction and resulting shapes of a liquid microjet impacting a soap film

Science.gov (United States)

Chan, Jau Tung; Lee, Jie Liang; Tjeng, Vincent; Yeo, Ye; Tan, Guoxian

2014-11-01

The International Young Physicists’ Tournament (IYPT) is a worldwide annual competition for high-school students. This paper is adapted from the solution to problem 8, Jet and Film, as presented by the Singapore Team at the 26th IYPT, Taipei, Taiwan. The impact of liquid microjets on stable soap films was investigated. Two steady regimes were observed: refraction (where the microjet penetrates the soap film and is deflected) and absorption (where the microjet merges with the soap film and forms vertical undulating patterns on the soap film surface). This phenomenon has potential applications in controlling the trajectory of a liquid microjet in air. Although Kirstetter et al (2012) investigated this interaction by using the same liquid for both the microjet and the soap film, this paper extends their work by using different liquids for the microjet and the soap film. In addition, the need for a small-angle approximation of Snell’s law is removed for the refraction regime, and an alternative expression is proposed for the force exerted by the soap film on the microjet in the absorption regime that accounts for the dependence of the wavelength of the undulating patterns on the angle of incidence of the microjet on the soap film. Empirical data support these improved theoretical predictions.

The microjet-film interaction: the interaction and resulting shapes of a liquid microjet impacting a soap film

International Nuclear Information System (INIS)

Chan, Jau Tung; Tan, Guoxian; Lee, Jie Liang; Tjeng, Vincent; Yeo, Ye

2014-01-01

The International Young Physicists’ Tournament (IYPT) is a worldwide annual competition for high-school students. This paper is adapted from the solution to problem 8, Jet and Film, as presented by the Singapore Team at the 26th IYPT, Taipei, Taiwan. The impact of liquid microjets on stable soap films was investigated. Two steady regimes were observed: refraction (where the microjet penetrates the soap film and is deflected) and absorption (where the microjet merges with the soap film and forms vertical undulating patterns on the soap film surface). This phenomenon has potential applications in controlling the trajectory of a liquid microjet in air. Although Kirstetter et al (2012) investigated this interaction by using the same liquid for both the microjet and the soap film, this paper extends their work by using different liquids for the microjet and the soap film. In addition, the need for a small-angle approximation of Snell’s law is removed for the refraction regime, and an alternative expression is proposed for the force exerted by the soap film on the microjet in the absorption regime that accounts for the dependence of the wavelength of the undulating patterns on the angle of incidence of the microjet on the soap film. Empirical data support these improved theoretical predictions. (paper)

A Controlled Study on the Correlation between Tear Film Volume and Tear Film Stability in Diabetic Patients

Directory of Open Access Journals (Sweden)

Iman M. Eissa

2016-01-01

Full Text Available Purpose. To assess the tear film quantity and correlate it with the quality and stability of the tear film in diabetics and compare them to age matched controls. Introduction. Diabetes affects tear film parameters in multiple ways. Poor metabolic control and neuropathy are postulated factors. To further understand how diabetes affects tear film parameters this study was conducted. Subjects and Methods. Tear meniscus height was measured by anterior segment OCT, along with tear thinning time, a subtype of noninvasive tear break-up time, and blinking rate per minute which were all recorded for 22 diabetic patients. Correlations between these tear film parameters were studied and then compared to 16 age matched controls. Results. A statistically significant difference was found in blinking rate between the diabetic and the control group (P=0.002, with higher blinking rate among diabetics. All tear film parameters were negatively correlated with duration of diabetes. A positive correlation was found between tear film volume and stability. Conclusion. Diabetes affects the tear film in various ways. Diabetics should be examined for dry eye signs even in absence of symptoms which may be masked by associated neuropathy. Duration of diabetes has an impact on tear film status.

ZnO film deposition by DC magnetron sputtering: Effect of target configuration on the film properties

Energy Technology Data Exchange (ETDEWEB)

Arakelova, E.; Khachatryan, A.; Kteyan, A.; Avjyan, K.; Grigoryan, S.

2016-08-01

Ballistic transport model for target-to-substrate atom transfer during magnetron sputter deposition was used to develop zinc target (cathode) configuration that enabled growth of uniform zinc oxide films on extensive surfaces and provided reproducibility of films characteristics irrespective of the cathode wear-out. The advantage of the developed target configuration for high-quality ZnO film deposition was observed in the sputtering pressure range of 5− 50 mTorr, and in the range of cathode-to-substrate distances 7–20 cm. Characteristics of the deposited films were demonstrated by using X-ray diffraction analysis, as well as optical and electrical measurements. - Highlights: • Change of target configuration for optimization of magnetron sputtering deposition is proposed. • Improvement of ZnO film properties due to use of this target is demonstrated. • This configuration provided reproducibility of the deposited films properties.

Nostalgic [re]remembering: film fan cultures and the affective reiteration of popular film histories.

Directory of Open Access Journals (Sweden)

Nathan Hunt

2011-05-01

Full Text Available

Abstract: This article explores two central uses of memory narratives in film fan culture: Firstly; that fan magazines recycle and reiterate popular histories of film, with the extensive detailing of anecdotes and histories of productions serving to fix certain texts as canonical, cult or classic film artefacts whilst legitimating nostalgia as a mode of reading; secondly; that such films are historically positioned in terms of an appeal to fans via nostalgia as activating personal and affective histories of pleasurable film reception. This piece examines the various ways that commercial magazines discursively utilise nostalgia in their mediation between texts, institutions and fan audiences. At the same time it also explores that way that nostalgia resonates within the activities and discourses of fans as they engage with film.

Résumé: Cet article analyse deux usages fondamentaux des souvenirs narratifs dans la culture des fans cinématographiques. D'une part, le recyclage et la reprise d'histoires populaires sur le cinéma, notamment, avec la mention très détaillée d'anecdotes et d'histoires sur l'histoire de

Konsep Teater Epik Brecht dalam Film Dogville

Directory of Open Access Journals (Sweden)

Philipus Nugroho Hari Wibowo

2014-11-01

Full Text Available Film yang menggunakan panggung sebagai tempat kejadian (setting masih jarangditemukan di Indonesia. Kalaupun ada film-film tersebut hanyalah mengisahkankehidupan orang-orang teater dengan segala aktivitas kesehariannya, ataumentransformasikan naskah-naskah panggung menjadi sebuah film. Film Dogvillekarya sineas Denmark, Lars von Trier, menggunakan konsep pemanggunganteater dalam penggarapan filmnya.Dalam film tersebut, setting sebuah kota hanyadihadirkan disebuah studio besar (panggung dengan garis-garis kapur yangdianggap mewakili berbagai macam benda ataupun dinding yang memisahkan satutempat dengan tempat lainnya. Furnitur yang dihadirkan sangat minimalis, hanyabeberapa benda saja yang dihadirkan yang dianggap cukup mengidentifikasikantempat tersebut. Background yang dipakai hanya layar hitam dan putih untukmembedakan adegan malam dan adegan siang. Berdasarkan kesamaan strukturpembentuk yang terdapat dalam film (narasi dan teater, yaitu tema, alur,penokohan, dan setting yang dipaparkan secara deskriptif, dapat dibuktikan bahwaKonsep Teater Epik Brecht yang selama ini diterapkan dalam panggung bisaditerapkan dalam film Dogville. Brecht’s Concept of EpicTheaterin Dogville Film. Films using the stage as the scene(setting are still rare in Indonesia, even if there are only films that tell us about the lifeof the theatre (stage with all activities of daily life, or transforming the manuscripts stage(theater into a movie. LarsvonTrier, Dannish film maker, made Dogville – it uses theconcept of theatrical staging in the process of the film making. In the film, a city settingis just presented in a large studio (stage with the chalk lines are considered to representa wide range of objects or wall that separate sone place to another one. Presenting veryminimalist furniture, only a few objects are presented and sufficient to identify the place.Background screens use only black and white to distinguish the scenes and the scenesduring the night. Based

Analysis of image factors of x-ray films : study for the intelligent replenishment system of automatic film processor

Energy Technology Data Exchange (ETDEWEB)

Park, Sung Tae; Yoon, Chong Hyun; Park, Kwang BO; Auh, Yong Ho; Lee, Hyoung Jin; In, Kyung Hwan; Kim, Keon Chung [Asan Medical Center, Ulsan Univ. College of Medicine, Ulsan (Korea, Republic of)

1998-06-01

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scanned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

TFOS DEWS II Tear Film Report.

Science.gov (United States)

Willcox, Mark D P; Argüeso, Pablo; Georgiev, Georgi A; Holopainen, Juha M; Laurie, Gordon W; Millar, Tom J; Papas, Eric B; Rolland, Jannick P; Schmidt, Tannin A; Stahl, Ulrike; Suarez, Tatiana; Subbaraman, Lakshman N; Uçakhan, Omür Ö; Jones, Lyndon

2017-07-01

The members of the Tear Film Subcommittee reviewed the role of the tear film in dry eye disease (DED). The Subcommittee reviewed biophysical and biochemical aspects of tears and how these change in DED. Clinically, DED is characterized by loss of tear volume, more rapid breakup of the tear film and increased evaporation of tears from the ocular surface. The tear film is composed of many substances including lipids, proteins, mucins and electrolytes. All of these contribute to the integrity of the tear film but exactly how they interact is still an area of active research. Tear film osmolarity increases in DED. Changes to other components such as proteins and mucins can be used as biomarkers for DED. The Subcommittee recommended areas for future research to advance our understanding of the tear film and how this changes with DED. The final report was written after review by all Subcommittee members and the entire TFOS DEWS II membership. Copyright © 2017 Elsevier Inc. All rights reserved.

Intrinsic work function of molecular films

International Nuclear Information System (INIS)

Ivančo, Ján

2012-01-01

The electronic properties of molecular films are analysed with the consideration of the molecular orientation. The study demonstrates that surfaces of electroactive oligomeric molecular films can be classified—analogously to the elemental surfaces—by their intrinsic work functions. The intrinsic work function of molecular films is correlated with their ionisation energies; again, the behaviour is analogous to the correlation existing between the first ionisation energy of elements and the work function of the corresponding elemental surfaces. The proposed intrinsic work-function concept suggests that the mechanism for the energy-level alignment at the interfaces associated with molecular films is virtually controlled by work functions of materials brought into the contact. - Highlights: ► Molecular films exhibit their own (intrinsic) work function. ► Intrinsic work function is correlated with ionisation energy of molecular films. ► Intrinsic work function determines dipole at interface with a particular surface. ► Surface vacuum-level change upon film growth does not relate to interfacial dipole.

Photopatterning of heterostructured polymer Langmuir-Blodgett films

International Nuclear Information System (INIS)

Li Tiesheng; Mitsuishi, Masaya; Miyashita, Tokuji

2008-01-01

Heterostructured polymer Langmuir-Blodgett (LB) film prepared by using poly(N-dodecylacrylamide-co-t-butyl 4-vinylphenyl carbonate) (p(DDA-tBVPC53)) and poly(N-neopentyl methacrylamide-co-9-anthrylmethyl methacrylate) (p(nPMA-AMMA10)) polymer LB films which can act as photogenerator layers were investigated. Patterns with a resolution of 0.75 μm were obtained on heterostructured polymer LB films composed of 4 layers of p(nPMA-AMMA10) LB film (top layers) and 40 layers of p(DDA-tBVPC53) LB film (under layers) on a silicon wafer by deep UV irradiation followed by development with 1% tetramethylammonium hydroxide aqueous solution. The sensitivity of the heterostructured polymer LB films was improved without loss of the resolution compared with p(DDA-tBVPC53) LB film. The etch resistance of the heterostructured polymer LB films was sufficiently good to allow patterning of a copper film suitable for photomask fabrication

Thin film metal-oxides

CERN Document Server

Ramanathan, Shriram

2009-01-01

Presents an account of the fundamental structure-property relations in oxide thin films. This title discusses the functional properties of thin film oxides in the context of applications in the electronics and renewable energy technologies.

Holographic tracking of quantized intra-film segments during interferometric laser processing of SiOx thin films(Conference Presentation)

Science.gov (United States)

Ho, Stephen; Domke, Matthias; Huber, Heinz P.; Herman, Peter P.

2017-03-01

Interferometric femtosecond laser processing of thin dielectric films has recently opened the novel approach for quantized nanostructuring from inside the film, driven by the rapid formation of periodic thin nanoscale plasma disks of 20 to 45 nm width, separated on half-wavelength, λ/2nfilm, spacing (refractive index, nfilm). The nano-disk explosions enable intra-film cleaving of subwavelength cavities at single or multiple periodic depths, enabling the formation of intra-film blisters with nanocavities and the digital ejection at fractional film depths with quantized-depth thickness defined by the laser wavelength. For this paper, the physical mechanisms and ablation dynamics underlying the intra-film cleavage of SiOx thin films were investigated by laser pump-probe microscopy with high temporal dynamic range recorded in a wide time-frame between 100 fs and 10 μs. The long time scales revealed a new observation method as Newton's Rings (observed 50 ns) of the laser-ablated film fragments. For the first time to our knowledge, the holographic tracking reveals the clustering of large mechanically ejected nano-film planes into distinct speed groups according to the multiple of λ/2nfilm in the film. The observation verifies a new `quantized' form of photo-mechanical laser "lift-off".

Thin film epitaxy and structure property correlations for non-polar ZnO films

International Nuclear Information System (INIS)

Pant, P.; Budai, J.D.; Aggarwal, R.; Narayan, Roger J.; Narayan, J.

2009-01-01

Heteroepitaxial growth and strain relaxation were investigated in non-polar a-plane (1 1 -2 0)ZnO films grown on r-plane (1 0 -1 2)sapphire substrates in the temperature range 200-700 deg. C by pulsed laser deposition. The lattice misfit in the plane of the film for this orientation varied from -1.26% in [0 0 0 1] to -18.52% in the [-1 1 0 0] direction. The alignment of (1 1 -2 0)ZnO planes parallel to (1 0 -1 2)sapphire planes was confirmed by X-ray diffraction θ-2θ scans over the entire temperature range. X-ray φ-scans revealed the epitaxial relationship:[0 0 0 1]ZnO-parallel [-1 1 0 1]sap; [-1 1 0 0]ZnO-parallel [-1 -1 2 0]sap. Depending on the growth temperature, variations in the structural, optical and electrical properties were observed in the grown films. Room temperature photoluminescence for films grown at 700 deg. C shows a strong band-edge emission. The ratio of the band-edge emission to green band emission is 135:1, indicating reduced defects and excellent optical quality of the films. The resistivity data for the films grown at 700 deg. C shows semiconducting behavior with room temperature resistivity of 2.2 x 10 -3 Ω-cm.

Effect of Graphene-EC on Ag NW-Based Transparent Film Heaters: Optimizing the Stability and Heat Dispersion of Films.

Science.gov (United States)

Cao, Minghui; Wang, Minqiang; Li, Le; Qiu, Hengwei; Yang, Zhi

2018-01-10

To optimize the performance of silver nanowire (Ag NW) film heaters and explore the effect of graphene on a film, we introduced poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) and graphene modified with ethyl cellulose (graphene-EC) into the film. The high-quality and well-dispersed graphene-EC was synthesized from graphene obtained by electrochemical exfoliation as a precursor. The transparent film heaters were fabricated via spin-coating. With the assistance of graphene-EC, the stability of film heaters was greatly improved, and the conductivity was optimized by adjusting the Ag NW concentration. The film heaters exhibited a fast and accurate response to voltage, accompanied by excellent environmental endurance, and there was no significant performance degradation after being operated for a long period of time. These results indicate that graphene-EC plays a crucial role in optimizing film stability and heat dispersion in the film. The Ag NW/PEDOT:PSS-doped graphene-EC film heaters show a great potential in low-cost indium-tin-oxide-free flexible transparent electrodes, heating systems, and transparent film heaters.

Film as Revolutionary Weapon: A Pedagogical Analysis. Latin American Studies Program, Film Series No. 3.

Science.gov (United States)

California Univ., Riverside. Latin American Studies Program.

This paper describes a university course designed to examine the use of film as a revolutionary medium in Latin American countries. Objectives of the course were to illustrate the complexity of studying a film genre, develop an analytical framework for comparing revolutionary films, and encourage students to reach their own conclusions about the…

New group wants better government / Gunta Kursisa

Index Scriptorium Estoniae

Kursisa, Gunta

2010-01-01

Uus mittepoliitiline organisatsioon Meierovicsi Ühiskond tahab tavalisi inimesi poliitikasse kaasata. Meierovicsi Ühiskonna likkmed võivad kandideerida Lätis toimuvatel parlamendivalimistel poliitilise liidu Ühtsus nimekirjas

Püha Jüri võitlus kapitalistliku hüdraga / Priit Hõbemägi, Andrei Hvostov

Index Scriptorium Estoniae

Hõbemägi, Priit, 1957-

2009-01-01

SDE uus esimees Jüri Pihl teatas, et sotsiaaldemokraatidel on alternatiiv seni valitsenud neoliberaalsele ideoloogiale. Autorite hinnangul hakkab J. Pihli vastasseis Reformierakonnaga olema hoopis teistsugune kui Keskerakonnaga

Muzei KUMU priglashajet russkih utshenikov / Andrei Babin

Index Scriptorium Estoniae

Babin, Andrei

2007-01-01

KUMU hariduskeskuse uus projekt "Remark"aitab vene õppekeelega koolide õpilastel ja lasteaedade lastel põhjalikumalt tutvuda eesti kunstiklassikaga. Kommenteerivad projekti koordinaator Jelena Levtshenkova ja programmijuht Karin Taidre

"Kriitiline arhitektuur" ja selle vastased / George Baird

Index Scriptorium Estoniae

Baird, George

2010-01-01

Ameerika kriitilisest arhitektuurist ja uuest projektiivsest arhitektuurist, mida ei saa arendada ilma projektiivse teooria toeta. Selleta muutuks uus arhitektuur autori arvates kiiresti lihtsalt pragmaatiliseks ja lihtsalt dekoratiivseks

Film Analysis through Linguistic Base

Science.gov (United States)

Tanriverdi, Belgin

2007-01-01

Studies made in the last few years show that using films in language classrooms is an effective way in teaching a foreign language. Well-chosen films can serve as a valuable pedagogical aid, both for classroom use and self-study. This article is about using films in language classrooms through a specially designed course, whose outline description…

Schwann cell interactions with polymer films are affected by groove geometry and film hydrophilicity

International Nuclear Information System (INIS)

Mobasseri, S A; Downes, S; Terenghi, G

2014-01-01

We have developed a biodegradable polymer scaffold made of a polycaprolactone/polylactic acid (PCL/PLA) film. Surface properties such as topography and chemistry have a vital influence on cell–material interactions. Surface modifications of PCL/PLA films were performed using topographical cues and UV–ozone treatment to improve Schwann cell organisation and behaviour. Schwann cell attachment, alignment and proliferation were evaluated on the grooved UV–ozone treated and non-treated films. Solvent casting of the polymer solution on patterned silicon substrates resulted in films with different groove shapes: V (V), sloped (SL) and square (SQ) shapes. Pitted films, with no grooves, were prepared as a negative control. The UV–ozone treatment was performed to increase hydrophilicity. The process specifications for UV–ozone treatment were evaluated and 5 min radiation time and 6 cm distance to the UV source were suggested as the optimal practise. When cultured on grooved films, Schwann cells elongated on the V and SL shape grooves without crossing over, and grew in the direction of the grooves. However, there was less elongation with more crossing over on the SQ shape grooves. The maximum cell length (511 μm) was observed on the treated V-grooved films. The cells cultured on pitted UV–ozone treated surfaces showed random arrangements with no increase in length. We have demonstrated that the synergic effects of physical cues combined with UV–ozone treatment have the potential to enhance Schwann cell morphology and alignment. (paper)

Electronic structure of semiconductor quantum films

International Nuclear Information System (INIS)

Zhang, S.B.; Yeh, C.; Zunger, A.

1993-01-01

The electronic structure of thin (≤30 A) free-standing ideal films of Si(001), Si(110), and GaAs(110) is calculated using a plane-wave pseudopotential description. Unlike the expectation based on the simple effective-mass model, we find the following. (i) The band gaps of (001) quantum films exhibit even-odd oscillation as a function of the number N of monolayers. (ii) In addition to sine-type envelope functions which vanish at the film boundaries, some states have cosine envelope functions with extrema at boundaries. (iii) Even-layer Si(001) films exhibit at the valence-band maximum a state whose energy does not vary with the film thickness. Such zero confinement states have constant envelope throughout the film. (iv) Optical transitions in films exhibit boundary-imposed selection rules. Furthermore, oscillator strengths for pseudodirect transitions in the vicinity of forbidden direct transitions can be enhanced by several orders of magnitude. These findings, obtained in direct supercell calculations, can be explained in terms of a truncated crystal (TC) analysis. In this approach the film's wave functions are expanded in terms of pairs of bulk wave functions exhibiting a destructive interference at the boundaries. This maps the eigenvalue spectra of a film onto the bulk band structure evaluated at special k points which satisfy the boundary conditions. We find that the TC representation reproduces accurately the above-mentioned results of direct diagonalization of the film's Hamiltonian. This provides a simple alternative to the effective-mass model and relates the properties of quantum structures to those of the bulk material

Underwater 3D filming

OpenAIRE

Rinaldi, Roberto

2014-01-01

After an experimental phase of many years, 3D filming is now effective and successful. Improvements are still possible, but the film industry achieved memorable success on 3D movie’s box offices due to the overall quality of its products. Special environments such as space (“Gravity” ) and the underwater realm look perfect to be reproduced in 3D. “Filming in space” was possible in “Gravity” using special effects and computer graphic. The underwater realm is still difficult to be handled. Unde...

Konstruksi Genre Dalam Film “the Lego Movie”

OpenAIRE

Natalia, Vivi

2014-01-01

“The Lego Movie” adalah film animasi dari produsen film Warner Bros yang menceritakan kehidupan dan petualangan Emmet, seorang konstruksi bangunan yang salah terdeteksi sebagai orang spesial yang mampu menyelesaikan masalah dunia. Film ini adalah sebuah film yang membawa konvensi-konvensi genre yang berbeda dibanding film-film animasi lainnya. Peneliti melakukan analisis genre terhadap film “The Lego Movie” menggunakan 6 elemen menurut Jane Stoke, yaitu setting, lokasi, peristiwa naratif, plo...

The Educational Film Industry

Science.gov (United States)

Tortora, Vincent R.; Schillaci, Peter

1975-01-01

Increased dialog is needed among educational film producers, distributors, and consumers in order to be sure that what is being produced meets educators' needs and also to help solve the financial problems of the film industry. (LS)

Polymer thin film as coating layer to prevent corrosion of metal/metal oxide film

Science.gov (United States)

Sarkar, Suman; Kundu, Sarathi

2018-04-01

Thin film of polymer is used as coating layer and the corrosion of metal/metal oxide layer is studied with the variation of the thickness of the coating layer. The thin layer of polystyrene is fabricated using spin coating method on copper oxide (CuO) film which is deposited on glass substrate using DC magnetron sputtering technique. Thickness of the polystyrene and the CuO layers are determined using X-ray reflectivity (XRR) technique. CuO thin films coated with the polystyrene layer are exposed to acetic acid (2.5 v/v% aqueous CH3COOH solution) environments and are subsequently analyzed using UV-Vis spectroscopy and atomic force microscopy (AFM). Surface morphology of the film before and after interaction with the acidic environment is determined using AFM. Results obtained from the XRR and UV-Vis spectroscopy confirm that the thin film of polystyrene acts as an anticorrosion coating layer and the strength of the coating depends upon the polymer layer thickness at a constant acid concentration.

Capacitive pressure transducer using flexible films. Junan film wo mochiita seiden yoryoshiki atsukaku transducer

Energy Technology Data Exchange (ETDEWEB)

Yamada, Y.; Tsuchida, N.; Imai, K. (Toyota Technological Institute, Aichi (Japan)); Fujita, K. (Nitto Denko Corp., Osaka (Japan)): Tsuboi, O. (Fujitsu Corp., Tokyo (Japan))

1992-12-20

This paper describes the design, manufacture, and evaluation of a capacitive pressure transducer made of polyimide films. The structure of a pressure transducer cell was first determined, and then, the deflection-stress and capacitance-load characteristics of the surface film were analyzed using finite element methods. For the practical stage of manufacture, a polyimide film was emboss processed and electrodes were deposited on the film to construct a pressure transducer cell to which a Schmidt-trigger detecting circuit was connected. As a consequence of the examination of operational characteristics of the cell, it was found that the actual relation between the deflection and load approximately agreed with the linear analyses, and that the capacitance depended with little hysteresis on the gap regardless of the native visco-elasticity of the film. Furthermore, small stick-slip vibration of a contact rubber surface was detected by the transducer to verify its high sensitivity. 17 refs., 18 figs.

Viscous bursting of suspended films

Science.gov (United States)

Debrégeas, G.; Martin, P.; Brochard-Wyart, F.

1995-11-01

Soap films break up by an inertial process. We present here the first observations on freely suspended films of long-chain polymers, where viscous effects are dominant and no surfactant is present. A hole is nucleated at time 0 and grows up to a radius R(t) at time t. A surprising feature is that the liquid from the hole is not collected into a rim (as it is in soap films): The liquid spreads out without any significant change of the film thickness. The radius R(t) grows exponentially with time, R~exp(t/τ) [while in soap films R(t) is linear]. The rise time τ~ηe/2γ where η is viscosity, e is thickness (in the micron range), and γ is surface tension. A simple model is developed to explain this growth law.

Characterization of organic thin films

CERN Document Server

Ulman, Abraham; Evans, Charles A

2009-01-01

Thin films based upon organic materials are at the heart of much of the revolution in modern technology, from advanced electronics, to optics to sensors to biomedical engineering. This volume in the Materials Characterization series introduces the major common types of analysis used in characterizing of thin films and the various appropriate characterization technologies for each. Materials such as Langmuir-Blodgett films and self-assembled monolayers are first introduced, followed by analysis of surface properties and the various characterization technologies used for such. Readers will find detailed information on: -Various spectroscopic approaches to characterization of organic thin films, including infrared spectroscopy and Raman spectroscopy -X-Ray diffraction techniques, High Resolution EELS studies, and X-Ray Photoelectron Spectroscopy -Concise Summaries of major characterization technologies for organic thin films, including Auger Electron Spectroscopy, Dynamic Secondary Ion Mass Spectrometry, and Tra...

Yield strength of attached copper film

International Nuclear Information System (INIS)

Zhang Yan; Zhang Jian-Min

2011-01-01

Variation of stress in attached copper film with an applied strain is measured by X-ray diffraction combined with a four-point bending method. A lower slope of the initial elastic segment of the curve of X-ray measured stress versus applied strain results from incomplete elastic strain transferred from the substrate to the film due to insufficiently strong interface cohesion. So the slope of the initial elastic segment of the X-ray stress (or X-ray strain directly) of the film against the substrate applied strain may be used to measure the film-substrate cohesive strength. The yield strength of the attached copper film is much higher than that of the bulk material and varies linearly with the inverse of the film thickness. (condensed matter: structural, mechanical, and thermal properties)

Biaxial stretching of film principles and applications

CERN Document Server

Demeuse, M T

2011-01-01

Biaxial (having two axes) stretching of film is used for a range of applications and is the primary manufacturing process by which products are produced for the food packaging industry. Biaxial stretching of film: principles and applications provides an overview of the manufacturing processes and range of applications for biaxially stretched films. Part one reviews the fundamental principles of biaxial stretching. After an introductory chapter which defines terms, chapters discuss equipment design and requirements, laboratory evaluations, biaxial film structures and typical industrial processes for the biaxial orientation of films. Additional topics include post production processing of biaxially stretched films, the stress-strain behaviour of poly(ethylene terephthalate) and academic investigations of biaxially stretched films. Part two investigates the applications of biaxial films including fresh cut produce, snack packaging and product labelling. A final chapter investigates potential future trends for bi...

Film thinning in unsaturated superfluid 4He films during persistent flow

International Nuclear Information System (INIS)

Ekholm, D.T.; Hallock, R.B.

1979-01-01

We report measurements of the thickness of unsaturated superfluid 4 He films in persistent flow as a function of persistent current velocity. Our results are in quantitative agreement with the predictions of Kontorovich, and thus disagree with the conclusion of Rudnick and coworkers that rho/sub s//rho has an enhanced velocity dependence in these films

Irradiation gamma on chitosan films

Energy Technology Data Exchange (ETDEWEB)