WorldWideScience

Sample records for urban development manufactured

  1. Advanced Manufacturing and Sustainable Urban Development%先进制造与可持续城市发展

    Institute of Scientific and Technical Information of China (English)

    Otthein HERZOG; Bernhard MUELLER; WU Zhiqiang

    2016-01-01

    highly dependent on the availability of adequate digital infrastructures and wel-functioning logistics systems, and they have a number of repercussions for cities and regions. Accordingly, it is surprising that little work has been done to date on the interrelations between urban development and Advanced Manufacturing, as global manufacturing and logistics wil lead to substantial changes during the implementation of the respective manufacturing strategies. Urban-connected, sustainable, and economic activities in the industrial sector wil have to be adapted to new local, regional, and global ICT-based value and logistics chains. Therefore, this paper addresses a new field of academic and practical interest in an explorative way, as there is neither sufficient scientific nor practical experience worldwide on the relation between Advanced Manufacturing and urban development. As a first step, this paper attempts to develop an initial hypothesis on the topic rather than providing data-driven or case-based analytical evidence. We discuss Advanced Manufacturing (1) in the contexts ofquality of growth, (2)the green urban economy,and (3)sustainable urban development, as defined and interpreted by the German International Development Cooperation (GIZ)[10, 11]. While the green urban economy and the sustainable development of metropolitan regions are closely linked with the quality of growth approach, they have a wider scope and transfer quality of growth to an urban context. High-quality economic growth is seen as a prerequisite for productive and decent employment, which is in turn crucial for poverty eradication and for the promotion of equitable economic and social development[10]. The GIZ has defined the folowing dimensions of high-quality growth: ·Smart growth: The promotion of productivity and competitiveness by encouraging the development of a knowledge- and innovation-based economy. ·Sustainable growth: Environmental sustainability in which the economic development of one

  2. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Williams, T.

    1997-01-01

    BNFL has a long tradition of willingness to embrace technological challenge and a dedication to quality. This paper describes advances in the overall manufacturing philosophy at BNFL's Fuel Business Group and then covers how some new technologies are currently being employed in BNFL Fuel Business Group's flagship oxide complex (OFC), which is currently in its final stages of commissioning. This plant represents a total investment of some Pound 200 million. This paper also describes how these technologies are also being deployed in BNFL's MOX plant now being built at Sellafield and, finally, covers some new processes being developed for advanced fuel manufacture. (author)

  3. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Ion, S.E.; Harrop, G.; Maricalva Gonzalez, J.

    1995-01-01

    The status of the investment and R and D programmes in the UK and Spanish fuel fabrication facilities is outlined. Due to a number of circumstances, BNFL and ENUSA have been in the forefront of capital investment, with associated commitment to engineering and scientific research and development. Carrying through this investment has allowed the embodiment of proven state of the art technologies in the design of fuel fabrication plants, with particular emphasis on meeting the future challenge of health and safety, and product quality, at an acceptable cost. ENUSA and BNFL currently supply fuel, not only to their respective 'home' markets but also to France, Belgium, Sweden, and Germany. Both organisations employ an International Business outlook and partake in focused and speculative R and D projects for the design and manufacture of nuclear fuel. (orig./HP)

  4. Drug development and manufacturing

    Science.gov (United States)

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  5. Urban development in China

    NARCIS (Netherlands)

    Brakman, Steven; Garretsen, J.H.; van Marrewijk, J.G.M.

    2016-01-01

    Urbanization is important for economic development. As the largest country in the world in terms of population, China has experienced a remarkable history of urbanization; one 1000 years ago it housed the largest cities in world, it went through a counter-urbanization revolution during the Mao

  6. Urban forests for sustainable urban development

    Science.gov (United States)

    Sundara, Denny M.; Hartono, Djoko M.; Suganda, Emirhadi; Haeruman, S. Herman J.

    2017-11-01

    This paper explores the development of the urban forest in East Jakarta. By 2030 Jakarta area has a target of 30% green area covering 19,845 hectares, including urban forest covering an area of 4,631 hectares. In 2015, the city forest is only 646 hectares, while the city requires 3,985 hectares of new land Urban forest growth from year to year showed a marked decrease with increasing land area awoke to commercial functions, environmental conditions encourage the development of the city to become unsustainable. This research aims to support sustainable urban development and ecological balance through the revitalization of green areas and urban development. Analytical methods for urban forest area is calculated based on the amount of CO2 that comes from people, vehicles, and industrial. Urban spatial analysis based on satellite image data, using a GIS program is an analysis tool to determine the distribution and growth patterns of green areas. This paper uses a dynamic system model to simulate the conditions of the region against intervention to be performed on potential areas for development of urban forests. The result is a model urban forest area is integrated with a social and economic function to encourage the development of sustainable cities.

  7. Urban Quality Development & Management

    DEFF Research Database (Denmark)

    Lehmann, Martin; Fryd, Ole

    2008-01-01

    Purpose: The purpose of this article is to describe and discuss the development and the structure of a new international master on the subject of Urban Quality Development & Management, and explore the potential of the process and the outcome in serving as models adoptable by faculty at other......: Urban quality development and management is dependent on human resource development, institutionalised networks and confident exchange of knowledge, and must identify and incorporate multiple environmental, social, economic and cultural aspects. The authors find that at the core of innovative societies......, an interlinkage exists between practice (business, civil society, governance) and theory (research, education). The case illustrates how a new curriculum takes time to develop and implement and how it relies on confidence and trust between partners, in this case cities and universities, before being able to plant...

  8. Development of Integration in Manufacturing

    DEFF Research Database (Denmark)

    Sørensen, Torben; Trostmann, Erik

    1996-01-01

    significance to all manufacturing industries.International standardization based on the product model definition standard STEP (ISO10303) is playing a key role in promoting a modern approach to Product Data Technology. The initial release of STEP, consisting of twelve essential parts, has recently been...... must be extended to cope with descriptions of functional behavior of products.In the robotics area, Computer Aided Robotics (CAR) systems for design, off-line programming, and simulation are currently increasing their model features with new topics, such as multi-body dynamics, realistic motion......Current international developments in the broad field of Product Data Technology are advancing rapidly and are leading up to new levels of technology in product model definition, product model communications, enterprise integration and cooperation. These developments will be of strategic...

  9. Informal Urban Development in Cairo

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Petersen, Mads Dines

    2017-01-01

    The city of Cairo, Egypt, currently experiences rapid urban growth. Large parts of the city expand without formal urban planning. This results in large-scale informal and unplanned development. In addition, the resulting urban fabric and individual buildings feature severe deficiencies when...... it comes to the basic quality of urban space, ventilation and daylight. While retrofitting already built-up areas would be a huge challenge, some minor improvements might be possible in future development even within the current mode of production of these spaces. In recent years, parametric design tools...... have opened up new possibilities for modelling in urban design. By way of a parametric design approach, different urban design parameters can be modified and new urban space scenarios can be rendered three dimensionally in almost real time. In short, this is parametric urban design. It opens up...

  10. Preventing Informal Urban Development

    DEFF Research Database (Denmark)

    Enemark, Stig; McLaren, Robin

    2008-01-01

    . This is directly linked to citizen participation in the process of land use control. Decentralisation should aim to combine responsibility for decision making with accountability for financial, social, and environmental consequences. Decentralisation requires access to appropriate quality of land information......, addresses the main issue of how to prevent informal urban development, especially through the use of adequate and sustainable means of land use control and good governance. Three key means are addressed: Decentralisation: There is a need to separate central policy/regulation making and local decision making...... in the decision making process? Legislation in itself is not enough. A cultural change within society may need to be encouraged. Again, access to participation requires access to land information. Comprehensive planning at local level supported by citizen participation should also enable establishment proper...

  11. Summary of development and recommendations for a quality assurance program for the procurement and manufacture of urban mass transit operating equipment and systems

    Science.gov (United States)

    Witkin, S. A.

    1976-01-01

    A viable quality program for the urban mass transit industry, and a management approach to ensure compliance with the program are outlined. Included are: (1) a set of guidelines for quality assurance to be imposed on transit authorities, and a management approach to ensure compliance with them; (2) a management approach to be used by the transit authorities (properties) for assuring compliance with the QA guidelines; and (3) quality assurance guidelines to be imposed by properties and umta for procurement of hardware and systems.

  12. Corporation-led urban development

    NARCIS (Netherlands)

    Potters, B.; Heurkens, E.W.T.M.

    2015-01-01

    Since a couple of years a remarkable phenomenon is witnessed in the field of urban development which entails that large multinationals corporations, such as IKEA and Siemens, start to engage in urban development projects. As their motivation to do so is unclear, it is difficult to estimate whether

  13. Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen, 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  14. In-Space Manufacturing Baseline Property Development

    Science.gov (United States)

    Stockman, Tom; Schneider, Judith; Prater, Tracie; Bean, Quincy; Werkheiser, Nicki

    2016-01-01

    The In-Space Manufacturing (ISM) project at NASA Marshall Space Flight Center currently operates a 3D FDM (fused deposition modeling) printer onboard the International Space Station. In order to enable utilization of this capability by designer, the project needs to establish characteristic material properties for materials produced using the process. This is difficult for additive manufacturing since standards and specifications do not yet exist for these technologies. Due to availability of crew time, there are limitations to the sample size which in turn limits the application of the traditional design allowables approaches to develop a materials property database for designers. In this study, various approaches to development of material databases were evaluated for use by designers of space systems who wish to leverage in-space manufacturing capabilities. This study focuses on alternative statistical techniques for baseline property development to support in-space manufacturing.

  15. Development of Advanced Ceramic Manufacturing Technology; FINAL

    International Nuclear Information System (INIS)

    Pujari, V.K.

    2001-01-01

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

  16. Recent Developments in Abrasive Hybrid Manufacturing Processes

    Directory of Open Access Journals (Sweden)

    Ruszaj Adam

    2017-06-01

    Full Text Available Recent dynamic development of abrasive hybrid manufacturing processes results from application of a new difficult for machining materials and improvement of technological indicators of manufacturing processes already applied in practice. This tendency also occurs in abrasive machining processes which are often supported by ultrasonic vibrations, electrochemical dissolution or by electrical discharges. In the paper we present the review of new results of investigations and new practical applications of Abrasive Electrodischarge (AEDM and Electrochemical (AECM Machining.

  17. Sustainable urban development

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Christensen, Toke Haunstrup; Gram-Hanssen, Kirsten

    Sustainability in urban planning has a long history and it has been a widespread solution to build high and compact in order to minimise the need for transportation, land use and heating. Recent research, however, points towards the need for a supplementary approach which includes the consumer...... behaviour of the household. This approach necessarily has to work from below and include the citizens, as it is their daily practices that have to be challenged. This article reviews the literature of to what extent compact cities are the most sustainable and it use lifestyle interpretations of urbane forms...... to challenge the compact cities approach. As an alternative or supplementary approach the article introduce practice theory as a way to understand consumption and it gives examples on how this approach can be used to inspire local authorities to alternative and supplementary strategies of achieving sustainable...

  18. Participation and dialogue in strategic manufacturing development

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Dukovska-Popovska, Iskra; Johansen, John

    2006-01-01

    Increased competition and the dynamics of technological and market developments have made operations in industrial enterprises very complex, with many stakeholders in and around the enterprise. At the same time, it has become important to address strategic issues of manufacturing. To plan...... dialogues during a workshop, part of which is a dialogue-monitoring instrument. Empirical studies will draw out process elements of participation and dialogue and demonstrate the applicability of the model. Finally, implications are spelled out for planning and managing workshops in different phases...... and manage an appropriate degree of participation in strategy development has become a key issue, especially to ensure ideas and ownership from those who will be involved in the implementation of a manufacturing strategy. We have developed and implemented a five-phased process for developing a manufacturing...

  19. Development of zirconium alloy tube manufacturing technology

    International Nuclear Information System (INIS)

    Kim, In Kyu; Park, Chan Hyun; Lee, Seung Hwan; Chung, Sun Kyo

    2009-01-01

    In late 2004, Korea Nuclear Fuel Company (KNF) launched a government funded joint development program with Westinghouse Electric Co. (WEC) to establish zirconium alloy tube manufacturing technology in Korea. Through this program, KNF and WEC have developed a state of the art facility to manufacture high quality nuclear tubes. KNF performed equipment qualification tests for each manufacturing machine with the support of WEC, and independently carried out product qualification tests for each tube product to be commercially produced. Apart from those tests, characterization test program consisting of specification test and characterization test was developed by KNF and WEC to demonstrate to customers of KNF the quality equivalency of products manufactured by KNF and WEC plants respectively. As part of establishment of performance evaluation technology for zirconium alloy tube in Korea, KNF carried out analyses of materials produced for the characterization test program using the most advanced techniques. Thanks to the accomplishment of the development of zirconium alloy tube manufacturing technology, KNF is expected to acquire positive spin off benefits in terms of technology and economy in the near future

  20. Urban bioclimatology in developing countries.

    Science.gov (United States)

    Jauregui, E

    1993-11-15

    A brief review of the literature on urban human bioclimatology in the tropics is undertaken. Attempts to chart human bioclimatic conditions on the regional/local scale have been made in several developing countries. The effective temperature scheme (with all its limitations) is the one that has been most frequently applied. The possibilities of application of bioclimatic models based on human heat balance for the tropical urban environment are discussed.

  1. Development of steam generator manufacturing technology

    International Nuclear Information System (INIS)

    Grant, J.A.

    1979-01-01

    In 1968 Babcock and Wilcox (Operations) Ltd., received an order from the CEGB to design, manufacture, install and commission 16 Steam Generators for 2 x 660 Mw (e) Advanced Gas Cooled Reactor Power Station at Hartlepool. This order was followed in 1970 by a similar order for the Heysham Power Station. The design and manufacture of the Steam Generators represented a major advance in technology and the paper discusses the methods by which a manufacturing facility was developed, by the Production Division of Babcock, to produce components to a quality, complexity and accuracy unique in the U.K. commercial boilermaking industry. The discussion includes a brief design background, a description of the Steam Generators and a view of the Production Division background. This is followed by a description of the organisation of the technological development and a consideration of the results. (author)

  2. Sustainable urban development and geophysics

    Science.gov (United States)

    Liu, Lanbo; Chan, L. S.

    2007-09-01

    The new millennium has seen a fresh wave of world economic development especially in the Asian-Pacific region. This has contributed to further rapid urban expansion, creating shortages of energy and resources, degradation of the environment, and changes to climatic patterns. Large-scale, new urbanization is mostly seen in developing countries but urban sprawl is also a major social problem for developed nations. Urbanization has been accelerating at a tremendous rate. According to data collected by the United Nations [1], 50 years ago less than 30% of the world population lived in cities. Now, more than 50% are living in urban settings which occupy only about 1% of the Earth's surface. During the period from 1950 to 1995, the number of cities with a population higher than one million increased from 83 to 325. By 2025 it is estimated that more than 60% of 8.3 billion people (the projected world population [1]) will be city dwellers. Urbanization and urban sprawl can affect our living quality both positively and negatively. In recent years geophysics has found significant and new applications in highly urbanized settings. Such applications are conducive to the understanding of the changes and impacts on the physical environment and play a role in developing sustainable urban infrastructure systems. We would like to refer to this field of study as 'urban geophysics'. Urban geophysics is not simply the application of geophysical exploration in the cities. Urbanization has brought about major changes to the geophysical fields of cities, including those associated with electricity, magnetism, electromagnetism and heat. An example is the increased use of electromagnetic waves in wireless communication, transportation, office automation, and computer equipment. How such an increased intensity of electromagnetic radiation affects the behaviour of charged particles in the atmosphere, the equilibrium of ecological systems, or human health, are new research frontiers to be

  3. Competitive Manufacturing: New Strategies for Regional Development.

    Science.gov (United States)

    Rosenfeld, Stuart A.

    In the past, economic development in the rural United States, particularly in the rural South, relied principally on the attractiveness of a low-wage work force to mass-production manufacturing industries. Now however, the viability of the traditional mass-production economy's organizational structure and operating procedures has been eroded by…

  4. Manufacturing Vision Development – Process and Dialogue

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra

    This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research invo...... involve case studies of three companies that are part of the MCD-process. The cases primarily are focusing on the process and the dialogue dur¬ing the manufacturing vision development.......This Ph.D. project has been conducted in the context of PRODUCTION+5 methodology for devel¬oping manufacturing visions for companies, and related to Experimental Laboratory for Production. Both have been established in the Center for Industrial Production. The empirical parts of the research...

  5. Is There A Rural-Urban Technology Gap? Results of the ERS Rural Manufacturing Survey

    OpenAIRE

    Gale, H. Frederick, Jr.

    1997-01-01

    Advanced technology use is less prevalent in rural than in urban manufacturing plants, but plants of comparable size in the same industry use about the same level of technology, regardless of urban/rural location. The rural gap comes about because the mix of rural industries is more heavily weighted with "low-technology" industries. Both rural and urban businesses rate inadequate worker skills as the most important barrier to use of new production technologies and management practices, while ...

  6. Development of Advanced Ceramic Manufacturing Technology

    Energy Technology Data Exchange (ETDEWEB)

    Pujari, V.K.

    2001-04-05

    Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration. A high-power diesel engine valve for the DDC Series 149 engine was chosen as the demonstration part for this program. This was determined to be an ideal component type to demonstrate cost-effective process enhancements, the beneficial impact of advanced ceramics on transportation systems, and near-term commercialization potential. The baseline valve material was NAC's NT451 SiAION. It was replaced, later in the program, by an alternate silicon nitride composition (NT551), which utilized a lower cost raw material and a simplified powder-processing approach. The material specifications were defined based on DDC's engine requirements, and the initial and final component design tasks were completed.

  7. CONTEMPORARY URBAN DEVELOPMENT IN CALABAR ...

    African Journals Online (AJOL)

    The result showed that the existing urban development spread could be reduced by more than 150% if the current trend of ... density at the core, people tend to seek for building lands at the .... of Wuhan, China, Yun (2011), showed that the.

  8. Fuel Cell Manufacturing Research and Development | Hydrogen and Fuel Cells

    Science.gov (United States)

    | NREL Fuel Cell Manufacturing Research and Development Fuel Cell Manufacturing Research and Development NREL's fuel cell manufacturing R&D focuses on improving quality-inspection practices for high costs. A researcher monitoring web-line equipment in the Manufacturing Laboratory Many fuel cell

  9. Urban sustainable development from public participation in urban management

    OpenAIRE

    L. Karimifard

    2016-01-01

    Urban management in any context has a different economic, social and political structure, which is in harmony with the existing models of organization. In spite of these differences, in order to reach a sustainable urban development, several different conferences should be referred to. In the “Brundtland Commission 1987” about urban sustainable development these definitions have been given: “preservation and promotion of the quality level of city life. This consists of ecology, culture, polit...

  10. Manufacturing development of low activation vanadium alloys

    International Nuclear Information System (INIS)

    Smith, J.P.; Johnson, W.R.; Baxi, C.B.

    1996-10-01

    General Atomics is developing manufacturing methods for vanadium alloys as part of a program to encourage the development of low activation alloys for fusion use. The culmination of the program is the fabrication and installation of a vanadium alloy structure in the DIII-D tokamak as part of the Radiative Divertor modification. Water-cooled vanadium alloy components will comprise a portion of the new upper divertor structure. The first step, procuring the material for this program has been completed. The largest heat of vanadium alloy made to date, 1200 kg of V-4Cr-4Ti, has been produced and is being converted into various product forms. Results of many tests on the material during the manufacturing process are reported. Research into potential fabrication methods has been and continues to be performed along with the assessment of manufacturing processes particularly in the area of joining. Joining of vanadium alloys has been identified as the most critical fabrication issue for their use in the Radiative Divertor Program. Joining processes under evaluation include resistance seam, electrodischarge (stud), friction and electron beam welding. Results of welding tests are reported. Metallography and mechanical tests are used to evaluate the weld samples. The need for a protective atmosphere during different welding processes is also being determined. General Atomics has also designed, manufactured, and will be testing a helium-cooled, high heat flux component to assess the use of helium cooled vanadium alloy components for advanced tokamak systems. The component is made from vanadium alloy tubing, machined to enhance the heat transfer characteristics, and joined to end flanges to allow connection to the helium supply. Results are reported

  11. In-Space Manufacturing Project (prior to FY15: Additive Manufacturing Technology Development)

    Data.gov (United States)

    National Aeronautics and Space Administration — The In-Space Manufacturing (ISM) project is responsible for developing the manufacturing capabilities that will provide on-demand, sustainable operations during NASA...

  12. Sprawl and sustainable urban development in Europe

    Directory of Open Access Journals (Sweden)

    Maksin-Mićić Marija

    2008-01-01

    Full Text Available Over 50 years urban development in Europe has been affected by extensive urban sprawl. Environmental, economic and social impacts of long lasting sprawl are threatening urban identity, urban culture and cultural identity of European territory. Last two decades the main concept in European planning and governance system has been the sustainable development, namely sustainable urban development and its implementation. We ought to be realistic about the possibilities to counter sprawl. Realistic seams to steer sprawling tendencies in more suitable and sustainable manner, so called smart urban sprawl. This paper analyses the planning concepts and gives the brief review of current policies for steering the urban sprawl in EU, which are considered to be of importance in achieving more sustainable urban development and efficient urban management in Serbia.

  13. Theorizing about technological development of manufacturing companies

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard

    2012-01-01

    The aim of the paper is to apply metatriangulation and theory building to strengthen our theorizing on technological development of manufacturing firms. AMT literature is reviewed and by means of bracketing, the paper identifies a set of problematic assumptions embedded within traditional AMT...... research. A case study is used to emphasize how a process perspective enriches the traditional structural perspective. Finally, through first attempts at theory building, a set of propositions is suggested in order to overcome long-standing problems found in AMT research....

  14. Recent development of cellular manufacturing systems

    Indian Academy of Sciences (India)

    be manufactured in a cell, and the machines, which will comprise that cell, can be ... approaches for the CF problem which is referred to as Production Flow Analysis (PFA). ... programming model of cellular manufacturing system design which ...

  15. Sustainable vaccine development: a vaccine manufacturer's perspective.

    Science.gov (United States)

    Rappuoli, Rino; Hanon, Emmanuel

    2018-05-08

    Vaccination remains the most cost-effective public health intervention after clean water, and the benefits impressively outweigh the costs. The efforts needed to fulfill the steadily growing demands for next-generation and novel vaccines designed for emerging pathogens and new indications are only realizable in a sustainable business model. Vaccine development can be fast-tracked through strengthening international collaborations, and the continuous innovation of technologies to accelerate their design, development, and manufacturing. However, these processes should be supported by a balanced project portfolio, and by managing sustainable vaccine procurement strategies for different types of markets. Collectively this will allow a gradual shift to a more streamlined and profitable vaccine production, which can significantly contribute to the worldwide effort to shape global health. Copyright © 2018 GlaxoSmithKine Biologicals SA. Published by Elsevier Ltd.. All rights reserved.

  16. Develop and Manufacture an airlock sliding tray

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Cindy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-02-26

    The goal of this project is to continue to develop an airlock sliding tray and then partner with an industrial manufacturing company for production. The sliding tray will be easily installed into and removed from most glovebox airlocks in a few minutes. Technical Approach: A prototype of a sliding tray has been developed and tested in the LANL cold lab and 35 trays are presently being built for the plutonium facility (PF-4). The current, recently approved design works for a 14-inch diameter round airlock and has a tray length of approximately 20 inches. The grant will take the already tested and approved round technology and design for the square airlock. These two designs will be suitable for the majority of the existing airlocks in the multitude of DOE facilities. Partnering with an external manufacturer will allow for production of the airlock trays at a much lower cost and increase the availability of the product for all DOE sites. Project duration is estimated to be 12-13 months. Benefits: The purpose of the airlock sliding trays is fourfold: 1) Mitigate risk of rotator cuff injuries, 2) Improve ALARA, 3) Reduce risk of glovebox glove breaches and glove punctures, and 4) Improve worker comfort. I have had the opportunity to visit many other DOE facilities including Savannah, Y-12, ORNL, Sandia, and Livermore for assistance with ergonomic problems and/or injuries. All of these sites would benefit from the airlock sliding tray and I can assume all other DOE facilities with gloveboxes built prior to 1985 could also use the sliding trays.

  17. Urban branding as an effective sustainability tool in urban development

    Directory of Open Access Journals (Sweden)

    Reeman Mohammed Rehan

    2014-08-01

    Urban branding is a new approach toward urban development of sustainable cities. City branding, a novel aspect of urban communication, improves marketing of the city image in various ways by converting the visual image of the city into a brand image. Unique characteristics of the city are featured and a sustainable urban image is created. This paper will focus on city branding as a powerful image-building strategy. In this realm, the branding of Stuttgart, Germany, serves as a successful model of a branding strategy. Next, branding of the city of Port Said, Egypt, will be explored. The principal aim of this paper is to describe how cities become branded; how branding succeeds; and how a viable city image is created. This paper reviews the methods used to brand cities, and concludes by emphasizing the importance of urban branding in terms of sustainability.

  18. Urban sustainable development from public participation in urban management

    Directory of Open Access Journals (Sweden)

    L. Karimifard

    2016-04-01

    Full Text Available Urban management in any context has a different economic, social and political structure, which is in harmony with the existing models of organization. In spite of these differences, in order to reach a sustainable urban development, several different conferences should be referred to. In the “Brundtland Commission 1987” about urban sustainable development these definitions have been given: “preservation and promotion of the quality level of city life. This consists of ecology, culture, politics, economies, and social participation. However, this development should in no case weigh on and create any problems for the future generations”. In all the definitions of urban management and urban sustainable development and in any political context citizens’ participation in decision making and insistence on social justice are mentioned. The aim of this article is a descriptive, analytic, and comparative study of different models of popular participation in different developed countries. Each of these countries has different social and political structure. However they all have the same aim which is the citizens’ empowerment. To reach the ideal urban management model it is necessary to have a clear image of the place and participation of citizens in order to create a socially, economically and politically sustainable developed society.

  19. Manufacturing Capacity Utilization and Industrial Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

  20. Strategies for Sustainable Urban Development and Urban-Rural Linkages

    DEFF Research Database (Denmark)

    Nilsson, Kjell; Nielsen, Thomas Alexander Sick; Aalbers, Carmen

    2014-01-01

    , identified how land use conflicts and the pressure towards peri- urban areas can be strategically managed in different development and regulatory contexts. To summarise, the following strategies were identified as important steps towards more sustainable urban-rural futures: (i) better coordination...... of transport, land use and open space planning; (ii) urban containment and densification – development a green compact city; (iii) preservation of blue and green infrastructure; and (iv) preservation of agricultural land and the promotion of local production. The need also remains to strengthen governance...... at the regional level while at the pan-European level there is clearly a need for more policy attention to be given to urban-rural linkages....

  1. Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing

    Science.gov (United States)

    2017-09-29

    Additive Manufacturing by Jared M Gardner and Thomas A Plaisted Approved for public release; distribution is unlimited...Laboratory Development of Cranial Bone Surrogate Structures Using Stereolithographic Additive Manufacturing by Thomas A Plaisted Weapons...Structures Using Stereolithographic Additive Manufacturing 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Jared

  2. Strategies for Sustainable Urban Development and Urban-Rural Linkages

    DEFF Research Database (Denmark)

    Nilsson, Kjell; Nielsen, Thomas Alexander Sick; Aalbers, Carmen

    2014-01-01

    of transport, land use and open space planning; (ii) urban containment and densification – development a green compact city; (iii) preservation of blue and green infrastructure; and (iv) preservation of agricultural land and the promotion of local production. The need also remains to strengthen governance......An important driving force behind urban expansion is the growth of the urban population. But for Europe, this is not a sufficient explanation. The major trend is that European cities have become much less compact. Since the mid-1950s European cities have expanded on average by 78%, whereas...... the population has grown by only 33%. In the PLUREL project - an integrated project within the EU’s 6th Research Framework Programme - more than 100 researchers from 15 countries analysed the impacts of urban land consumption at a pan-European level and, through six European and one Chinese case studies...

  3. NASA Game Changing Development Program Manufacturing Innovation Project

    Science.gov (United States)

    Tolbert, Carol; Vickers, John

    2011-01-01

    This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

  4. Development and Manufacture of the Nuclear Laboratory Equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Kim, J. K.; Kim, K. S.; Lee, I. B.; Youm, J. H.; Park, I. W.

    2008-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  5. Development and Manufacture of the Nuclear Laboratory Equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Moon, J. S.; Lee, I. B.; Youn, J. H.

    2010-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  6. Development and Manufacture of the Nuclear laboratory equipment

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-12-01

    This report on development and manufacture of the nuclear laboratory equipment contains the work scope and contents performed for supporting the researches and the developments projects efficiently. And also, the records for the principal production design, the manufacture contents, the working drawings and the CNC program are described in it. Most of works are to support the successful and convenient performance of the R and D projects by development and manufacturing the requested laboratory equipment

  7. Urban base flow with low impact development

    Science.gov (United States)

    Bhaskar, Aditi; Hogan, Dianna M.; Archfield, Stacey A.

    2016-01-01

    A novel form of urbanization, low impact development (LID), aims to engineer systems that replicate natural hydrologic functioning, in part by infiltrating stormwater close to the impervious surfaces that generate it. We sought to statistically evaluate changes in a base flow regime because of urbanization with LID, specifically changes in base flow magnitude, seasonality, and rate of change. We used a case study watershed in Clarksburg, Maryland, in which streamflow was monitored during whole-watershed urbanization from forest and agricultural to suburban residential development using LID. The 1.11-km2 watershed contains 73 infiltration-focused stormwater facilities, including bioretention facilities, dry wells, and dry swales. We examined annual and monthly flow during and after urbanization (2004–2014) and compared alterations to nearby forested and urban control watersheds. We show that total streamflow and base flow increased in the LID watershed during urbanization as compared with control watersheds. The LID watershed had more gradual storm recessions after urbanization and attenuated seasonality in base flow. These flow regime changes may be because of a reduction in evapotranspiration because of the overall decrease in vegetative cover with urbanization and the increase in point sources of recharge. Precipitation that may once have infiltrated soil, been stored in soil moisture to be eventually transpired in a forested landscape, may now be recharged and become base flow. The transfer of evapotranspiration to base flow is an unintended consequence to the water balance of LID.

  8. Developing a Parametric Urban Design Tool

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Obeling, Esben

    2014-01-01

    Parametric urban design is a potentially powerful tool for collaborative urban design processes. Rather than making one- off designs which need to be redesigned from the ground up in case of changes, parametric design tools make it possible keep the design open while at the same time allowing...... for a level of detailing which is high enough to facilitate an understan- ding of the generic qualities of proposed designs. Starting from a brief overview of parametric design, this paper presents initial findings from the development of a parametric urban design tool with regard to developing a structural...... logic which is flexible and expandable. It then moves on to outline and discuss further development work. Finally, it offers a brief reflection on the potentials and shortcomings of the software – CityEngine – which is used for developing the parametric urban design tool....

  9. Commercial Electric Vehicle (EV) Development and Manufacturing Program

    Energy Technology Data Exchange (ETDEWEB)

    Leeve, Dion

    2014-06-30

    Navistar with the Department of Energy’s assistance undertook this effort to achieve the project objectives as listed in the next section. A wholly owned subsidiary of Navistar, Workhorse Sales Corporation was the original grant awardee and upon their discontinuation as a standalone business entity, Navistar assumed the role of principal investigator. The intent of the effort, as part of the American Recovery and Reinvestment Act (ARRA) was to produce zero emission vehicles that could meet the needs of the marketplace while reducing carbon emissions to zero. This effort was predicated upon the assumption that concurrent development activities in the lithium ion battery industry investigations would significantly increase their production volumes thus leading to substantial reductions in their manufacturing costs. As a result of this development effort much was learned about the overall system compatibility between the electric motor, battery pack, and charging capabilities. The original system was significantly revised and improved during the execution of this development effort. The overall approach that was chosen was to utilize a British zero emissions, class 2 truck that had been developed for their market, homologate it and modify it to meet the product requirements as specified in the grant details. All of these specific goals were achieved. During the course of marketing and selling the product valuable information was obtained as relates to customer expectations, price points, and product performance expectations, specifically those customer expectations about range requirements in urban delivery situations. While the grant requirements specified a range of 100 miles on a single charge, actual customer usage logs indicate a range of 40 miles or less is typical for their applications. The price point, primarily due to battery pack costs, was significantly higher than the mass market could bear. From Navistar’s and the overall industry’s perspective

  10. PDC Journeys to Product Analysis Development and Additive Manufacturing?

    International Nuclear Information System (INIS)

    Shalina Sheik Muhamad

    2015-01-01

    The technology for product development and manufacturing has gone through many advancements. It is widely recognised that it would provide competitive advantage for engineering organization in term of product development cycle, productivity, sustainability and efficiency. We begin by describing the general characteristic of design process that will need to be integrated in product life cycle management. In Nuclear Malaysia, especially in engineering design activities the majority have been using 3D modelling. This paper discusses on the current product design practiced in Nuclear Malaysia, new product development process and new manufacturing technique which is additive manufacturing. (author)

  11. Development of polymer catalyst manufacturing technology

    International Nuclear Information System (INIS)

    Chung, Heung Seok; Kim, Yong Ik; Lee, Han Soo; Kang, Hui Seok; Seong, Ki Ung; Na, Jeong Won; An, Do Hui; Kim, Kwang Rak; Cho, Young Hyeon; Baek, Seung Uh; Jeong, Yong Won

    1993-01-01

    Heavy water is used as moderator and coolant in Pressurized Heavy Water Power Plants. According to the governmental long-term plan for power supply, Korea is scheduled to construct new six pressurized heavy water power plants till the year 2006. Total heavy water demand for these plants would be 3892 Mg during the period 1992-2006. Reformed hydrogen processes are considered best suited to Korea. Hydrophobic catalysts for this process were manufactured and the performance of hydrogen isotope exchance was investigated. The overall mass transfer coefficients varied between 0.004 and 2.295 m 3 HD/m 3 Bed.sec. and heavy water separation processes using the catalysts were optimized. (Author)

  12. The Experiment Method for Manufacturing Grid Development on Single Computer

    Institute of Scientific and Technical Information of China (English)

    XIAO Youan; ZHOU Zude

    2006-01-01

    In this paper, an experiment method for the Manufacturing Grid application system development in the single personal computer environment is proposed. The characteristic of the proposed method is constructing a full prototype Manufacturing Grid application system which is hosted on a single personal computer with the virtual machine technology. Firstly, it builds all the Manufacturing Grid physical resource nodes on an abstraction layer of a single personal computer with the virtual machine technology. Secondly, all the virtual Manufacturing Grid resource nodes will be connected with virtual network and the application software will be deployed on each Manufacturing Grid nodes. Then, we can obtain a prototype Manufacturing Grid application system which is working in the single personal computer, and can carry on the experiment on this foundation. Compared with the known experiment methods for the Manufacturing Grid application system development, the proposed method has the advantages of the known methods, such as cost inexpensively, operation simple, and can get the confidence experiment result easily. The Manufacturing Grid application system constructed with the proposed method has the high scalability, stability and reliability. It is can be migrated to the real application environment rapidly.

  13. Urban development and global sustainability

    Directory of Open Access Journals (Sweden)

    Ferlaino Fiorenzo

    2014-03-01

    Full Text Available In the 1950s, the economist Simon Kuznets theorized the existence of a bell-shaped curve describing the correlation between the level of GDP per capita and income inequality. This generated another hypothesis concerning the existence of an inverted-U relationship between income per capita (GDP and environmental impact. By means of a cross-country analysis, the article shows that, at least at the global scale, an Environmental Kuznets Curve (EKC does not exist, but rather an Environmental Urban Curve (EUC. The city exhibits an complex socioeconomic metabolism that we can define in terms of dissipative and resilience territorial structures.

  14. Integrating developing country manufacturing industries into global supply chain

    Directory of Open Access Journals (Sweden)

    Fasika Bete Georgise

    2014-01-01

    Full Text Available Purpose: Due to globalization of manufacturing activities, the arena of competition and competitiveness advantage is moving from firms towards supply chains and networks. With the recent advancement of information and communication technologies this participation are becoming as common business practice in developed countries firms. Companies were more integrated into the world market for the global nature of the sourcing, manufacturing and distribution. These changes create both challenges and opportunities for the manufacturing industries in developing countries. The objective of this paper is to examine the level of inter-organizational and intra-organizational supply chain integration practices in developing country, Ethiopia.Design/methodology/approach: An industrial questionnaires survey was used to collect the current practices of the manufacturing industries in Ethiopia as an example of the developing countries. Descriptive statistics is primarily used for the analysis.Findings: Results show a low level of supply chain relationship both in intra and inter organizational supply chain integration level among members. Accordingly, such issues require much attention to facilitate a greater integration within the supply chains in the Ethiopian manufacturing industries.Research limitations/implications: The paper focuses on examining the practices of Ethiopian manufacturing industries empirical data. The interpretation of results should be taken with prudence.Originality/Value: The manufacturing industry in developing countries (MIDC has been a part of the global supply chains for long time as a supplier of raw material and manufacturer of primary products. Currently, the MIDC is trying to access the different markets segment of the world even with new products starting from their local market to the complex and dynamic international market. Nevertheless, their supply chains are inefficient and hence, their competitiveness level far from the

  15. Key Features of the Manufacturing Vision Development Process

    DEFF Research Database (Denmark)

    Dukovska-Popovska, Iskra; Riis, Jens Ove; Boer, Harry

    2005-01-01

    of action research. The methodology recommends wide participation of people from different hierarchical and functional positions, who engage in a relatively short, playful and creative process and come up with a vision (concept) for the future manufacturing system in the company. Based on three case studies......This paper discusses the key features of the process of Manufacturing Vision Development, a process that enables companies to develop their future manufacturing concept. The basis for the process is a generic five-phase methodology (Riis and Johansen 2003) developed as a result of ten years...... of companies going through the initial phases of the methodology, this research identified the key features of the Manufacturing Vision Development process. The paper elaborates the key features by defining them, discussing how and when they can appear, and how they influence the process....

  16. China and the Manufacturing Exports of Other Developing Countries

    OpenAIRE

    Gordon H. Hanson; Raymond Robertson

    2008-01-01

    In this paper, we examine the impact of China's growth on developing countries that specialize in manufacturing. Over 2000-2005, manufacturing accounted for 32% of China's GDP and 89% of its merchandise exports, making it more specialized in the sector than any other large developing economy. Using the gravity model of trade, we decompose bilateral trade into components associated with demand conditions in importing countries, supply conditions in exporting countries, and bilateral trade cost...

  17. Urbanization and the Geography of Development

    OpenAIRE

    Henderson, J. Vernon

    2013-01-01

    This paper focuses on several interrelated key questions on the geography of development. Although we herald cities with their industrial bases as 'engines of growth,' does industrialization in fact drive urbanization?1 What economic activities do cities of different sizes undertake? Does this change as countries develop? If so, what are the policy implications? Do development policies hav...

  18. Urban development and employment in Abidjan.

    Science.gov (United States)

    Joshi, H; Lubell, H; Mouly, J

    1975-04-01

    The city of Abidjan in the Ivory Coast has grown physically, economically, and demographically at rates exceeding all reasonable expectation. Yet, as in many other development nations, the employment generated by Abidjan's rapid economic expansion has failed to keep pace with the increase in working population it has attracted. Consequently, economic success has been accompanied by a variety of social strains. Some of these have been discussed in earlier issues of the "International Labour Review" by Louis Roussel. This discussion expands on Roussel's earlier treatment by focusing more specifically on several facets of the urban employment problem created by the rapid growth of Abidjan. Attention is directed to labor supply and employment, factors affecting migration, foreign Africans in the Ivory Coast labor force; the urban informal sector; urban infrastructure and development; social problems of population pressure; employment policy options (current government policies and other policy options); and general issues and policy alternatives (motivations for rural urban migration, smaller urban centers as alternative growth poles, and distributing the gains from development). Several essential features of the employment problem stem from the rural urban distribution of the workforce. The rural labor force, including temporary seasonal workers from the savannah countries to the north, remains more or less in balance with increasing rural employment opportunities, since the migration of Ivory Coast nationals to the cities is balanced by the inflow of foreign workers. In contrast, the influx of migrants into urban areas has led to a more rapid increase in the urban labor force than in urban employment, with a consequent rise in unemployment. In 1970 the Abidjan rate of open unemployment was probably around 20%. At this time, most people's idea of a desirable job is one in the formal sector of the urban economy. If there is to be any hope of an eventual balance between

  19. Regulations in establishing and developing urban entities

    Directory of Open Access Journals (Sweden)

    Ljubić Slavoljub C.

    2009-01-01

    Full Text Available The main topic of this work is to represent relatively new method of analyzing, planning and developing various projects in different architectural fields. The concept 'pattern' symbolizes a new view on objects and items that are already exist around us or those that will be created in the future. By explaining this concept, this work focus on describing 'pattern' as a new system or 'pattern language' that identifies foundation and development of unplanned cities. Every town or urban entity symbolizes 'pattern', but it is made from various 'patterns' as well. There are certain rules i.e. patterns that particular urban entities follow in order to establish themselves and 'pattern language' has been developed on that basis. The main purpose of this work is to emphasize this phenomenon and reveal the significance that 'patterns' have in urbanism development. Their understanding is of great importance so they can be implemented not only in theoretical but also in practical examination and analysis.

  20. Integration of Manufacturing and Development in Emerging Markets

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2011-01-01

    The paper investigates the problems related to functional integration between manufacturing activities and R&D activities in emerging markets within multinational companies. A framework to this end is developed and illustrated in relation to four cases from multinational companies, which have...... established R&D and manufacturing in China or India. The findings point to the importance of contingencies such as industrial clock speed, technological complexity, as well as the extent to which local adaptation is needed. Keywords: Co-location, Emerging markets, Functional integration, Manufacturing, R&D....

  1. An Indexing Scheme for Case-Based Manufacturing Vision Development

    DEFF Research Database (Denmark)

    Wang, Chengbo; Johansen, John; Luxhøj, James T.

    2004-01-01

    with the competence improvement of an enterprises manufacturing system. There are two types of cases within the CBRM – an event case (EC) and a general supportive case (GSC). We designed one set of indexing vocabulary for the two types of cases, but a different indexing representation structure for each of them......This paper focuses on one critical element, indexing – retaining and representing knowledge in an applied case-based reasoning (CBR) model for supporting strategic manufacturing vision development (CBRM). Manufacturing vision (MV) is a kind of knowledge management concept and process concerned...

  2. Implementing ITI for urban development locally

    Directory of Open Access Journals (Sweden)

    Garyfallia Katsavounidou

    2017-12-01

    Full Text Available In the current Programming Period (2014-2020 the European Commission has introduced a new strategic instrument, the Integrated Territorial Investment (ITI, which shifts the decisions on allocation of funds to the local level and, most importantly, enables drawing of funds from several priority axes and from several European Structural and Investment Funds. Greece is one of EU member countries that has committed on using ITIs as a tool for urban development. In August 2016, in the Region of Central Macedonia, urban authorities with a population of over 10.000 inhabitants were invited by the Managing Authority of the Regional Operational Programme to submit a Strategy for Sustainable Urban Development (SUD, through the mandatory implementation of the ITI tool. The paper focuses on one of these municipalities, the city of Veria, where the ITI approach has been implemented for the design of an ITI of urban scale (ITI-SUD. The integrated approach prescribed by regional authorities forced Municipalities to adopt government approaches uncommon until now: to involve multiple stakeholders in the entire process, from strategy development to project selection and implementation. The paper describes the benefits and challenges of the new approach as applied in the local context, showing the vertical and horizontal connections of urban development strategies. Most importantly, in the context of ‘procedural learning’ happening in Europe in the field of territorial cohesion, it offers an insight on how European cohesion policy strategies and tools are tested at the local level.

  3. Applying a manufacturing vision development prototype in practice

    DEFF Research Database (Denmark)

    Wang, Chengbo; Luxhøj, James T.; Johansen, John

    2005-01-01

    The primary objective of this paper is to summarise the empirical application of a designed case-based manufacturing vision (MV) development prototype (CBRM). This empirical application is undertaken using case study strategy, due to its ability to answer the research questions regarding...... enterprise. The three real world cases (companies) were selected in the USA within different industrial segments. The application results suggest that the CBRM is supportive of the decision-making process for tackling strategic manufacturing issues....

  4. HUD Subprime and Manufactured Home Lender List

    Data.gov (United States)

    Department of Housing and Urban Development — The U.S. Department of Housing and Urban Development (HUD) periodically produce its HUD Subprime and Manufactured home Lender List for the lenders who specialize in...

  5. Results from ITER Vacuum Vessel Sector Manufacturing Development in Europe

    International Nuclear Information System (INIS)

    Jones, L.

    2006-01-01

    Significant results have been achieved since the previous SOFT conference, when the manufacturing development work required to prepare for the ITER Vacuum Vessel Sector was described. The contract for the manufacture of a full-size, 20 Ton poloidal part of the inboard section, fabricated according to the ITER reference manufacturing route, including bracing fixtures, welding applications, restraint effects, and fit-up aspects is approaching completion. Since the main aim of the work is to establish the practicability of achieving the tight dimensional tolerances, an accompanying SYSWELD analysis programme has been validation by instrumented welding coupons, and then used for predicting the distortion of the actual construction. A local machining tool has been developed to allow the requirement for machining of the cylindrical features at a late stage of manufacture. Experimental and analytical work has also been carried out to establish the possibility of 3-D cold-forming large sections of walls of the VV. A manufacturing programme to validate an alternative method of fabricating parts of the double-walled VV, utilising e-beam welding only and avoiding the quality issues of the one-sided access and inspection of the closing welds is presented. This paper describes the results of the manufacturing development programme and the future activities. (author)

  6. Development of stable isotope manufacturing in Russia

    International Nuclear Information System (INIS)

    Pokidychev, A.; Pokidycheva, M.

    1999-01-01

    For the past 25 years, Russia has relied heavily on the electromagnetic separation process for the production of middle and heavy mass stable isotopes. The separation of most light isotopes had been centered in Georgia which, after the collapse of the USSR, left Russia without this capability. In the mid-1970s, development of centrifuge technology for the separation of stable isotopes was begun. Alternative techniques such as laser separation, physical-chemical methods, and ion cyclotron resonance have also been investigated. Economic considerations have played a major role in the development and current status of the stable isotope enrichment capabilities of Russia

  7. Pubertal development timing in urban Chinese boys.

    Science.gov (United States)

    Ma, H-M; Chen, S-K; Chen, R-M; Zhu, C; Xiong, F; Li, T; Wang, W; Liu, G-L; Luo, X-P; Liu, L; Du, M-L

    2011-10-01

    We describe current pubertal development in healthy urban Chinese boys. A cross-sectional study of the pubertal development of 18,807 urban Chinese boys aged from 3.50 to 18.49years was conducted between 2003 and 2005. Testicular volume was evaluated with a Prader orchidometer. Pubic hair development was assessed according to the Tanner method. Data on spermarche were collected using the status quo method. Probit analysis was used to calculate the median age and 95% CI at different stages of testicular development, pubic hair development and spermarche. By age 9, 12.99% of the boys had a testicular volume of 4mL or greater. The median age of onset of puberty defined as the age at attainment of testicular volume of 4mL or greater was 10.55 (95% CI 10.27-10.79) years. The median age for onset of pubic hair development (PH(2) ) and spermarche was 12.78 (95%CI 12.67-12.89) years and 14.05 (95%CI 13.80-14.32) years, respectively. Pubertal onset in urban Chinese boys is earlier than currently used clinical norms but their pubic hair development occurs relatively late in comparison with the reported data from numerous other countries. There is also evidence of a secular trend towards an earlier age of spermarche since 1979 in Chinese urban boys. © 2011 The Authors. International Journal of Andrology © 2011 European Academy of Andrology.

  8. Manufacturing development for the SAFE 100 kW core

    International Nuclear Information System (INIS)

    Carter, Robert; Roman, Jose; Salvail, Pat

    2002-01-01

    In stark contrast to what is sometimes considered the norm in traditional manufacturing processes, engineers at the Marshall Space Flight Center (MSFC) arc in the practice of altering the standard in an effort to realize other potential methods in core manufacturing. While remaining within the bounds of the materials database, we are researching into core manufacturing techniques that may have been overlooked in the past due to funding and/or time constraints. To augment proven core fabrication capabilities we are pursuing plating processes as another possible method for core build-up and assembly. Although brazing and a proprietary HIP cycle are used for module assembly (proven track record for stability and endurance), it is prudent to pursue secondary or backup methods of module and core assembly. For this reason heat tube manufacture and module assembly by means of plating is being investigated. Potentially, the plating processes will give engineers the ability to manufacture replacement modules for any module that might fail to perform nominally, and to assemble/disassemble a complete core in much less time than would be required for the conventional Braze-HIP process. Another area of improvement in core manufacturing capabilities is the installation of a sodium and lithium liquid metal heat pipe fill machine. This, along with the ability to Electron Beam Weld heat pipe seals and wet-in the pipes in the necessary vacuum atmosphere, will eliminate the need to ship potentially hazardous components outside for processing. In addition to developing core manufacturing techniques, the SAFE manufacturing team has been evaluating the thermal heat transfer characteristics, and manufacturability of several heat exchanger design concepts

  9. Development of MOX manufacturing technology in BNFL

    International Nuclear Information System (INIS)

    Buchan, P.G.; Powell, D.J.; Edwards, J.

    1998-01-01

    BNFL is successfully operating a small scale MOX fuel fabrication facility at its Sellafield Site and is currently constructing an advanced, commercial scale MOX facility to complement its existing LWR UO 2 fabrication capability. BNFL's MOX fuel capability is fully supported by a comprehensive technology development programme aimed at providing a high quality product which is successfully competing in the market. Building on the experience gained over the last 30 years, is from the production of both thermal and fast reactor MOX fuels, BNFL's development team set a standard for its MOX product which is targeted at exceeding the performance of UO 2 fuel in reactor. In order to meet the stringent design requirements the product development team has introduced the Short Binderless Route (SBR) process that is now used routinely in BNFL's MOX Demonstration Facility (MDF) and which forms the basis for BNFL's large scale Sellafield MOX Plant. This plant not only uses the SBR process for MOX production but also incorporates the most advanced technology available anywhere in the world for nuclear fuel production. A detailed account of the technology developed by BNFL to support its MOX fuels business will be provided, together with an explanation of the processes and plants used for MOX fuel production by BNFL. The paper also looks at the future needs of the MOX business and how improvements in pellet design can assist the MOX fabrication production process to meet the user demand requirements of utilities around the world. (author)

  10. Manufacturing Enterprise in Asia | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2012-08-23

    Aug 23, 2012 ... ... of the distribution of enterprises by size across Asia, including India, Japan, ... enterprise development and its overall impact on the economy. ... His main areas of research interest are industry, poverty, labour, and employment, ... In partnership with UNESCO's Organization for Women in Science for the ...

  11. INDUSTRIAL LAND DEVELOPMENT AND MANUFACTURING DECONCENTRATION IN GREATER JAKARTA

    NARCIS (Netherlands)

    Hudalah, Delik; Viantari, Dimitra; Firman, Tommy; Woltjer, Johan

    2013-01-01

    Industrial land development has become a key feature of urbanization in Greater Jakarta, one of the largest metropolitan areas in Southeast Asia. Following Suharto's market-oriented policy measures in the late 1980s, private developers have dominated the land development projects in Greater Jakarta.

  12. Capacity Development for Sustainable Urban Transportation in Developing Countries

    OpenAIRE

    Senbil, Metin; Fujiwara, Akimasa; Zhang, Junyi

    2008-01-01

    To make urban transport sustainable, effective and efficient, first and foremost, there is a need for capacity development-capacity is defined as the ability to deal with problems in efficient and effective ways-in developing countries. Apart from many important capacity related problems such as lack of adequate infrastructure, older vehicle population, etc., policy makers in developing countries have to consider changing individual behavior to realize sustainable urban transportation policie...

  13. Development of European urban tourist systems

    Directory of Open Access Journals (Sweden)

    Jerković Senta

    2009-01-01

    Full Text Available Relationship between urban development and tourism is a significant process in Europe today. Development of tourism has caused many organizational changes in urban environment. In the middle of the 20th century cultural and historical heritage in the cities was impetus of development of tourism in European cities. Nowadays, in many European cities tourism is recognized as a mean of further economic development. Strategy of polycentricity, outlined in European spatial development perspective is supporting that process, too. Many tourist centres and metropolitan tourist areas have been developed. In the period from 1996. to 2007. number of visitors in European cultural capitals was growing continuously by rate of 25,6%. In the same period, the number of international tourist arrivals increased by rate of only 7%.

  14. Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

    Science.gov (United States)

    Pai, Shantaram S.; Nagpal, Vinod K.

    2007-01-01

    An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

  15. Integration of Manufacturing and Development in Emerging Markets

    DEFF Research Database (Denmark)

    Søberg, Peder Veng; Wæhrens, Brian Vejrum

    2014-01-01

    The chapter investigates the problems related to the functional integration between manufacturing activities and research and development (R&D) activities in emerging markets within multinational companies. A framework to this end is developed and illustrated through four case studies from...... as an integral part of corporate relocation decisions....

  16. Urbanism and energy in developing regions

    Energy Technology Data Exchange (ETDEWEB)

    Meier, R.L.; Berman, S.; Dowell, D.

    1978-03-01

    The pace of urbanization must continue, because in most parts of the world the surplus population in the countryside has nowhere else to go. The world is about 40% urban now and apparently headed for the 80 to 90% share of the total population presently exhibited by the developed countries. Thus, the 1.6 billion urban dwellers in 1978 would become about 3 billion in 1995--if major catastrophes can be avoided. Feasibility assessments for Sao Paulo-Rio de Janeiro, Calcutta, Cairo-Alexandria, Mexico City, and Seoul are presented in the appendices. This analysis-from-a-distance is insufficient to judge how much extra installed electrical generating capacity is required before 1995, the added refining capability for liquid fuels, or the uses for new LNG and coal imports due to be arranged. It is evident that energy (and perhaps also water in most regions) planning is the major determinant of the manner in which these urban areas will adapt to the extraordinary pressures for new settlement. The current round of planning in such metropolitan areas has been addressed to solving traffic-congestion problems, and reorganizing land use in central districts, as the most-pressing issues. Since energy sources and distribution systems now affect the largest and most crucial investments in urban growth it is to be expected that future metropolitan planning may concentrate upon energy efficiency. Energy supplies must be planned to meet requirements set by locally dominant values regarding human services and the environment.

  17. Climate resilient urban development : why responsible land governance is important

    NARCIS (Netherlands)

    Mitchell, D.; Enemark, S.; van der Molen, P.

    2015-01-01

    In less-developed countries, the major global pressures of rapid urbanization and climate change are resulting in increased vulnerability for urban dwellers. Much of the climate impact is concentrated in urban and coastal areas, as urban development spreads into areas that are hazard-prone. Often

  18. Tour guides developing urban ecotourism destinations

    DEFF Research Database (Denmark)

    Meged, Jane Widtfeldt; Lasa-Gonzalez, Anne Cecilie

    is “controlled by other stakeholder and largely beyond the influence of tour guides” (ibid). In fact Weiler and Black (2015) argue that pathways and extend have never been investigated on how interpretative guiding improves the economic viability and competitiveness of business, and social and cultural benefits...... to local communities and destinations. In this paper, we want to propose a research agenda where guides have a central role in cooperation with public and private key stakeholder in development of a scalable participatory model for sustainable urban ecotourism. Wang & Wang (2013) define urban ecotourism...... as an “activity system to satisfy needs of the locals and visitors for using local natural scenery, culture and folk customs, and also to maintain ecological balance of urban environment and establish environment-friendly concepts” (2013:1). Drawing on Iterative Participatory Design, where “the concept is defined...

  19. Agriculture, development, and urban bias

    NARCIS (Netherlands)

    Bezemer, Dirk; Headey, Derek

    Throughout history, agriculture-led development strategies with state support programs have been essential to achieving rapid economy-wide growth, poverty reduction, and structural transformation. Yet over the last three decades, the domestic and international policy environments have continued to

  20. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    OpenAIRE

    Haftu Hailu; Abdelkadir Kedir; Getachew Bassa; Kassu Jilcha

    2017-01-01

    The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for th...

  1. The development of clean-burning, noncatalytic manufactured fireplaces

    International Nuclear Information System (INIS)

    Broome, F.H.

    1992-01-01

    Concern for the air quality of this country in general and the Western states in particular has brought sharp focus from regulators on the emissions of Particulate Matter (PM) from all wood-burning appliances. This concern was a driving force which led to the development of a clean-burning fireplace. Many Western areas have begun to limit installation of wood-burning appliances in new construction. Some jurisdictions allow only Environmental Protection Agency (EPA) certified appliances. Currently no federal test methods or standards exist for fireplaces so the Manufactured Fireplace Industry, through the Hearth Products Association (HPA), set about to develop suitable test methods and standards for manufactured fireplaces

  2. Urbanization, Economic Development and Environmental Change

    Directory of Open Access Journals (Sweden)

    Shushu Li

    2014-08-01

    Full Text Available This paper applies the pressure-state-response (PSR model to establish environmental quality indices for 30 administrative regions in China from 2003 to 2011 and employs panel data analysis to study the relationships among the urbanization rate, economic development and environmental change. The results reveal a remarkable inverted-U-shaped relationship between the urbanization rate and changes in regional environmental quality; the “turning point” generally appears near an urbanization rate of 60%. In addition, the degree and mode of economic development have significant, but anisotropic effects on the regional environment. Generally, at a higher degree of economic development, the environment will tend to improve, but an extensive economic growth program that simply aims to increase GDP has a clear negative impact on the environment. Overall, the results of this paper not only further confirm the “environmental Kuznets curve hypothesis”, but also expand it in a manner. The analysis in this paper implies that the inverted-U-shaped evolving relationship between environmental quality and economic growth (urbanization is universally applicable.

  3. Curitiba: Towards sustainable urban development

    Energy Technology Data Exchange (ETDEWEB)

    Rabinovitch, J.

    1995-12-31

    Curitiba is best known for its innovative public transport system based on buses but this is only one among many initiatives which have improved the environment and quality of life in the city, limited pollution and waste and reduced resource use. The public transport system has also been complemented by comprehensive initiatives in planning and land use management. This paper describes not only the development of the public transport system but also the planning and administrative framework that was needed to make it, and other initiatives taken in Curitiba, effective.

  4. Does Electricity Drive the Development of Manufacturing Sector in Malaysia?

    Energy Technology Data Exchange (ETDEWEB)

    Husaini, Dzul Hadzwan [Faculty of Economics and Business, Universiti Malaysia Sarawak, Sarawak (Malaysia); Lean, Hooi Hooi, E-mail: hooilean@usm.my [Economics Program, School of Social Sciences, Universiti Sains Malaysia, Penang (Malaysia)

    2015-04-22

    This paper investigates the relationship between electricity consumption, output, and price in the manufacturing sector in Malaysia. We find that electricity consumption, output, and price are cointegrated in the long run. In addition, it has been found that the relationship between electricity consumption and output is positive. In the long run, we find a unidirectional causality from manufacturing output to electricity consumption. This result indicates that the development of manufacturing sector stimulates greater demand for electricity. Government needs to make sure that the planning of electricity supply in the future is in line with the economic development planning to avoid shortage in electricity supply. In the short run, a unidirectional relationship runs from electricity consumption to output is found. A decrease of energy usage in production might reduce the output growth in short run. Hence, we suggest improving the efficiency of electricity usage and some cost-effective sources of energy.

  5. Does Electricity Drive the Development of Manufacturing Sector in Malaysia?

    International Nuclear Information System (INIS)

    Husaini, Dzul Hadzwan; Lean, Hooi Hooi

    2015-01-01

    This paper investigates the relationship between electricity consumption, output, and price in the manufacturing sector in Malaysia. We find that electricity consumption, output, and price are cointegrated in the long run. In addition, it has been found that the relationship between electricity consumption and output is positive. In the long run, we find a unidirectional causality from manufacturing output to electricity consumption. This result indicates that the development of manufacturing sector stimulates greater demand for electricity. Government needs to make sure that the planning of electricity supply in the future is in line with the economic development planning to avoid shortage in electricity supply. In the short run, a unidirectional relationship runs from electricity consumption to output is found. A decrease of energy usage in production might reduce the output growth in short run. Hence, we suggest improving the efficiency of electricity usage and some cost-effective sources of energy.

  6. Challenges of urbanization and peri-urban development in Europe

    DEFF Research Database (Denmark)

    Nielsen, Thomas Alexander Sick; Nilsson, Kjell Svenne Bernhard

    2010-01-01

    Urbanisation has arguably been the most significant process of land use change in Europe since Second World War. Over 70% of Europe's population now lives in urban areas, which in turn, have grown in area by almost 80% over the last fifty years (EEA 2006). Urban areas cover approximately five...... percent of the territory of the European Union (EU25), and are growing more than twice as fast as the European population. A general consequence of the urbanisation trend and increasing wealth and mobility is urban sprawl, as well as the emergence of peri-urban areas....

  7. The realities of Lagos urban development vision on livelihoods of the urban poor

    Directory of Open Access Journals (Sweden)

    Oluwafemi Ayodeji Olajide

    2018-04-01

    Full Text Available Similar to many other cities in sub-Saharan African countries, the struggle between urban development policies and the livelihoods of the urban poor is one of the urban development challenges facing Lagos. This paper examines the realities of the Lagos urban development policies and intiatives on the livelihoods of the urban poor. The state government embarked on series of what it calls sustainable urban transformation policies towards making Lagos ‘an African model megacity’ and a global economic and financial hub that is safe, secure, functional and productive, with a view to achieving poverty alleviation and sustainable development. This paper, through the lens of theoretical and analytical underpinnings of Sustainable Livelihoods Framework, however, argues that the actions of the state government contradict the whole essence of sustainable urban development and poverty alleviation, but reflect an agenda deliberately targeted to further impoverish the poor. While the Sustainable Livelihood was used as the theoretical and analytical framework, this paper essentially focuses on the Policies, Institutions and Processes component of the framework. This provides a unique entry point for understanding the implications of the Lagos urban development aspirations on the livelihoods of the urban poor. The research uses mixed methods research design with a broad range of data-collection methods, including household surveys, interviews, direct observation and photography, documentary review and policy document analysis. The study reveals that there is a disconnection between urban development policies and realities of the poor. The implementation of urban development projects and policies works against the urban poor and resulted in more hardship, through reduction in livelihood opportunities or complete loss of livelihoods. This study, therefore, suggests that one important element in reducing poverty in Lagos’ informal settlements is a policy

  8. Recent advances in fuel product and manufacturing process development

    International Nuclear Information System (INIS)

    Slember, R.J.; Doshi, P.K.

    1987-01-01

    This paper discusses advancements in commercial nuclear fuel products and manufacturing made by the Westinghouse Electric Corporation in response to the commercial nuclear fuel industry's demand for high reliability, increased plant availability and improved operating flexibility. The features and benefits of Westinghouse's most advanced fuel products--VANTAGE 5 for PWR plants and QUAD+ for BWR plants--are described, as well as 'high performance' fuel concepts now under development for delivery in the late 1980s. The paper also disusses the importance of in-process quality control throughout manufacturing towards reducing product variability and improving fuel reliability. (author)

  9. Recent developments in the economic modeling of photovoltaic module manufacturing

    Science.gov (United States)

    Chamberlain, R. G.

    1979-01-01

    Recent developments in the solar array manufacturing industry costing standards (SAMICS) are described. Consideration is given to the added capability to handle arbitrary operating schedules and the revised procedure for calculation of one-time costs. The results of an extensive validation study are summarized.

  10. Development and Manufacture of Polymer-based Electrochromic Devices

    DEFF Research Database (Denmark)

    Jensen, Jacob; Hösel, Markus; Dyer, Aubrey L.

    2015-01-01

    -to-roll methods compatible with upscaling and manufacture. The successful approaches to operational devices are presented in detail, as well as areas where future research would have a high impact and accelerate the development such as highly conducting and transparent substrates, electrolytes adapted...

  11. Place of Manufacture Diversification in Cyclical Development of the Enterprise

    Science.gov (United States)

    Erofeev, Alexander G.; Smolin, Georgy K.

    2016-01-01

    The relevance of the researched problem is caused by the fact that diversification is one of the best options for reforming enterprises. The aim of the research: to consider changes in production of outputs in development cycles of the enterprise. This will help to reveal the nature of manufacture diversification. The leading method to the…

  12. Technology transfer and international development: Materials and manufacturing technology

    Science.gov (United States)

    1982-01-01

    Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

  13. [Changes in urban development: is the globalization era one of urban deconcentration?].

    Science.gov (United States)

    Rivera, S

    1997-01-01

    Urbanization patterns in Mexico during the past five decades clearly reflect trends in the country's capitalist development. Accelerated industrialization with protectionism; redistributive policies with unlimited expansion of public expenditures; industrial conversion attended by economic crisis and structural adjustment during the "lost decade" of the 1980s; and indiscriminate opening, currency instability, and anti-inflation measures in the stage of globalization represent four successive phases. This work argues that the commercial opening and application of a neoliberal model are likely to renew tendencies toward concentration of population and economic activity in a few metropolitan areas. There are indications that manufacturing is again tending to concentrate in the older industrial cities, especially Mexico City. The 1995 census suggests that, beginning in 1988, the metropolitan areas again began to attract population growth, after a cycle of outflow from the center city to the metropolitan periphery in the 1970s and 1980s. The trend toward deconcentration, thus, may not represent a linear and long-term tendency. Instead, fluctuations over time are intimately related to macroeconomic forces and regulatory mechanisms that influence the urban system. No consensus has been reached concerning the theoretical explanations of effects on regional or urban systems when international restrictions on commerce are eliminated. The neoclassical perspective predicts a homogenizing effect, assuming that key conditions are met, while a competing theory predicts that increasing competition will inevitably be met by increases in the scale of production. Incentives to focus production in a small number of places would lead to economic and demographic concentration in the urban centers or regions enjoying better infrastructure, more qualified labor forces, and more extensive markets for labor and consumption. A renewed cycle of locus in Mexico's largest metropolitan zones may

  14. Development of granular powder manufacturing technology by spray pyrolysis

    International Nuclear Information System (INIS)

    Katoh, Yoshiyuki; Kawase, Keiichi; Takahashi, Yoshiharu; Todokoro, Akio

    1996-01-01

    For shortening of mixed-oxide (MOX) fuel manufacturing process and improvement in treatment of MOX-powder, we have been developing the granular powder production technology. Since the granular powders have excellent fluidity owing to the spherical shape, there is the possibility of modifying scattering and adcering of the powder in the process equipment. In this paper, spray pyrolysis process in adopted as the process of manufacturing the granular powders and the basic feasibility study has been carried out. The experimental results show that the manufactured granular powders have excellent fluidity and the diameter of the powders is controllable. Furthermore, high density pellets are formed by sintering the powders. Thus, it is clarified that this process is promising for the actual MOX fuel fabrication. (author)

  15. Phase 1 Development Testing of the Advanced Manufacturing Demonstrator Engine

    Science.gov (United States)

    Case, Nicholas L.; Eddleman, David E.; Calvert, Marty R.; Bullard, David B.; Martin, Michael A.; Wall, Thomas R.

    2016-01-01

    The Additive Manufacturing Development Breadboard Engine (BBE) is a pressure-fed liquid oxygen/pump-fed liquid hydrogen (LOX/LH2) expander cycle engine that was built and operated by NASA at Marshall Space Flight Center's East Test Area. The breadboard engine was conceived as a technology demonstrator for the additive manufacturing technologies for an advanced upper stage prototype engine. The components tested on the breadboard engine included an ablative chamber, injector, main fuel valve, turbine bypass valve, a main oxidizer valve, a mixer and the fuel turbopump. All parts minus the ablative chamber were additively manufactured. The BBE was successfully hot fire tested seven times. Data collected from the test series will be used for follow on demonstration tests with a liquid oxygen turbopump and a regeneratively cooled chamber and nozzle.

  16. Strategies for sustainable urban development and urban-rural linkages

    NARCIS (Netherlands)

    Nilsson, K.; Sick Nielsen, T.; Aalbers, C.B.E.M.; Bell, S.; Boitier, B.; Chery, J.P.; Fertner, C.; Groschowski, M.; Haase, D.; Loibl, W.; Pauleit, S.; Pintar, M.; Piorr, A.; Ravetz, J.; Ristimäki, M.; Rounsevell, M.; Tosics, I.; Westerink, J.; Zasada, I.

    2014-01-01

    An important driving force behind urban expansion is the growth of the urban population. But for Europe, this is not a sufficient explanation. The major trend is that European cities have become much less compact. Since the mid-1950s European cities have expanded on average by 78%, whereas the

  17. Self-organized criticality and urban development

    Directory of Open Access Journals (Sweden)

    Michael Batty

    1999-01-01

    Full Text Available Urban society is undergoing as profound a spatial transformation as that associated with the emergence of the industrial city two centuries ago. To describe and measure this transition, we introduce a new theory based on the concept that large-scale, complex systems composed of many interacting elements, show a surprising degree of resilience to change, holding themselves at critical levels for long periods until conditions emerge which move the system, often abruptly, to a new threshold. This theory is called ‘self-organized criticality’; it is consistent with systems in which global patterns emerge from local action which is the hallmark of self-organization, and it is consistent with developments in system dynamics and their morphology which find expression in fractal geometry and weak chaos theory. We illustrate the theory using a unique space–time series of urban development for Buffalo, Western New York, which contains the locations of over one quarter of a million sites coded by their year of construction and dating back to 1773, some 60 years before the city began to develop. We measure the emergence and growth of the city using urban density functions from which measures of fractal dimension are used to construct growth paths of the way the city has grown to fill its region. These phase portraits suggest the existence of transitions between the frontier, the settled agricultural region, the centralized industrial city and the decentralized postindustrial city, and our analysis reveals that Buffalo has maintained itself at a critical threshold since the emergence of the automobile city some 70 years ago. Our implied speculation is: how long will this kind of urban form be maintained in the face of seemingly unstoppable technological change?

  18. Playing by the rules? Analysing incremental urban developments

    NARCIS (Netherlands)

    Karnenbeek, van Lilian; Janssen-Jansen, Leonie

    2018-01-01

    Current urban developments are often considered outdated and static, and the argument follows that they should become more adaptive. In this paper, we argue that existing urban development are already adaptive and incremental. Given this flexibility in urban development, understanding changes in the

  19. URBAN TOURISM BETWEEN CONTENT AND ASPIRATION FOR URBAN DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Roxana Valentina GÂRBEA

    2013-06-01

    Full Text Available With excessive urbanization that the society knows today, the city became the place of origin and at the same time a destination for an increasingly number of tourists. Cities have a higher fitting territory, diversity and quality of tourism products coming to fill a reach touristic ground, especially anthropogenic. Urban tourism has seen a significant, but uneven increase, whit the big European cities detaching themselves through cultural richness and tourist valorization of urban space and may be role models for other cities. The article proposes the approach on the concept of urban tourism and how this form of tourism is in full process of affirmation, given that, in recent years many cities search to find a new identity for themselves, to gain international recognition through tourism.

  20. Development of High Temperature Capacitor Technology and Manufacturing Capability

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2011-05-15

    The goal of the Development of High Temperature Capacitor Technology and Manufacturing Capability program was to mature a production-ready supply chain for reliable 250°C FPE (fluorinated polyester) film capacitors by 2011. These high-temperature film capacitors enable both the down hole drilling and aerospace industries by enabling a variety of benefits including: - Deeper oil exploration in higher temperature and pressure environments - Enabling power electronic and control equipment to operate in higher temperature environments - Enabling reduced cooling requirements of electronics - Increasing reliability and life of capacitors operating below rated temperature - Enabling capacitors to handle higher electrical losses without overheating. The key challenges to bringing the FPE film capacitors to market have been manufacturing challenges including: - FPE Film is difficult to handle and wind, resulting in poor yields - Voltage breakdown strength decreases when the film is wound into capacitors (~70% decrease) - Encapsulation technologies must be improved to enable higher perature operation - Manufacturing and test cycle time is very long As a direct result of this program most of the manufacturing challenges have been met. The FPE film production metalization and winding yield has increased to over 82% from 70%, and the voltage breakdown strength of the wound capacitors has increased 270% to 189 V/μm. The high temperature packaging concepts are showing significant progress including promising results for lead attachments and hermetic packages at 200°C and non-hermetic packages at 250°C. Manufacturing and test cycle time will decrease as the market for FPE capacitors develops.

  1. Development of an ergonomics guideline for the furniture manufacturing industry.

    Science.gov (United States)

    Mirka, Gary A

    2005-03-01

    Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

  2. Manufacturing Development of the NCSX Modular Coil Windings

    International Nuclear Information System (INIS)

    Chrzanowski, JH; Fogarty, PJ; Heitzenroeder, PJ; Meighan, T.; Nelson, B.; Raftopoulos, S.; Williamson, D.

    2005-01-01

    The modular coils on the National Compact Stellarator Experiment (NCSX) present a number of significant engineering challenges due to their complex shapes, requirements for high dimensional accuracy and the high current density required in the modular coils due to space constraints. In order to address these challenges, an R and D program was established to develop the conductor, insulation scheme, manufacturing techniques, and procedures. A prototype winding named Twisted Racetrack Coil (TRC) was of particular importance in dealing with these challenges. The TRC included a complex shaped winding form, conductor, insulation scheme, leads and termination, cooling system and coil clamps typical of the modular coil design. Even though the TRC is smaller in size than a modular coil, its similar complex geometry provided invaluable information in developing the final design, metrology techniques and development of manufacturing procedures. In addition a discussion of the development of the copper rope conductor including ''Keystoning'' concerns; the epoxy impregnation system (VPI) plus the tooling and equipment required to manufacture the modular coils will be presented

  3. Evaluation of urban sprawl and urban landscape pattern in a rapidly developing region.

    Science.gov (United States)

    Lv, Zhi-Qiang; Dai, Fu-Qiang; Sun, Cheng

    2012-10-01

    Urban sprawl is a worldwide phenomenon happening particularly in rapidly developing regions. A study on the spatiotemporal characteristics of urban sprawl and urban pattern is useful for the sustainable management of land management and urban land planning. The present research explores the spatiotemporal dynamics of urban sprawl in the context of a rapid urbanization process in a booming economic region of southern China from 1979 to 2005. Three urban sprawl types are distinguished by analyzing overlaid urban area maps of two adjacent study years which originated from the interpretation of remote sensed images and vector land use maps. Landscape metrics are used to analyze the spatiotemporal pattern of urban sprawl for each study period. Study results show that urban areas have expanded dramatically, and the spatiotemporal landscape pattern configured by the three sprawl types changed obviously. The different sprawl type patterns in five study periods have transformed significantly, with their proportions altered both in terms of quantity and of location. The present research proves that urban sprawl quantification and pattern analysis can provide a clear perspective of the urbanization process during a long time period. Particularly, the present study on urban sprawl and sprawl patterns can be used by land use and urban planners.

  4. Ljubljana – phases of urban development

    Directory of Open Access Journals (Sweden)

    Aleksander Jakoš

    2006-01-01

    Full Text Available At the end of the Second World War there were approximately 100.000 people living in the compact part of Ljubljana. A period of rapid population development ensued (urbanisation because of immigration from other parts of Slovenia and later from various regions of the former Yugoslav Republics. This period is marked by numerous new housing estates and early stagnation of the old city core. A period ob sub-urbanisation followed and city expansion along the main roads, interspersed with poor quality building and illegal development. Costly renewal of old buildings, diminished construction of housing estates and high prices of building land triggered the flight of city dwellers (de-urbanisation and caused non-urban development in neighbouring municipalities (secondary urbanisation. By rehabilitation of the old city centre and attempts at revitalisation Ljubljana is trying re-urbanise itself. The flight of the younger population, caused by limited offer of housing, still remains the main problem that furthermore causes increased volumes of daily commuting and congestion in the city centre caused by parked vehicles. The tally of increased population during the last decade to small neighbouring municipalities, caused by flight from Ljubljana, is 20.000, while the population of Ljubljana is decreasing. With its quarter of a million inhabitants, Ljubljana is the third smallest capital city of Europe (without the “pocket” states. The main issue in the neighbouring municipalities is expressively non-urban development, meaning that too much land is used and the utilities infrastructure threshold is not met. The present division of the Ljubljana metropolitan region truly calls for a Strategy of spatial development, at least on the level of the Ljubljana urban region.

  5. CURRENT TRENDS IN DEVELOPING URBAN TOURISM

    Directory of Open Access Journals (Sweden)

    Selin Yıldız

    2013-07-01

    Full Text Available The synergy of architecture and other disciplines in studies of developing tourism is  significant in terms of continuity of past and future. Now architects and urban designers are working in collaboration with social sciences disciplines in the field of urban tourism. Some examples of cultural, artistic and social activities can be listed as: re-transformation of port districts, opening of new museums, new additions to the fabric of the historic city, theme parks, coastal regulations, re-use of historic structures, innovative approaches to accommodation services, production of the metropolitan centers, architectural competitions organized by central and local governments, prestige landscapes, innovative, technological and ecological approaches in architecture, festivals, design and fashion weeks, guided tours, city walks, local meetings, lectures, courses in art education, concerts, sport events, fairs , the cultural capitals. The paper analyses these works companion to tourism in detail and in a holistic sese, questions these studies in urban,  economic, cultural and social movement axes. This inquiry aims to discuss current  projects being carried out in Istanbul which is an important city in the world, also to offer a wide range of tips for conducting a collaborative, multi-dimensional perspective studies carried out in the field of tourism.

  6. Park system concept for environmental sustainabilityin urban spatial development

    Science.gov (United States)

    Uniaty, Q.

    2018-01-01

    Urban Park System is an integrated concept between nature system and urban life. The problems caused by urban population activity resulted in the need to increase the balance between two systems. Establishment of urban park system is a response to the need for resilience of urban space structures. As an ideal requirement it needs to be built integration between the ecological, social, economic, aesthetic aspects of urban landscape architecture. The methodology was developed based on an approach to issues affecting the conditions due to urban issues and its relation to the development efforts of urban park system; Observation of Jakarta problem was obtained based on published studies and data, literature, characteristic and potential analyzes, local physical, from limited field observations. Both are simple methods aimed to describe the nature of a condition as well as form characteristics of problems in controlling the development of region, to examine the causes and symptoms. This method try to assess an object study compared between the conditions before and after. The benefits of urban park system development will not only improve the urban environment, but the value of urban pride, identity and control urban growth in line with efforts to improve the balance between conservation and development. Integrated urban park system will enhance the multifunctional role, connectivity, habitability, durability, identity and investment.

  7. Critical success factors model developing for sustainable Kaizen implementation in manufactur-ing industry in Ethiopia

    Directory of Open Access Journals (Sweden)

    Haftu Hailu

    2017-12-01

    Full Text Available The purpose of the research is to identify critical success factors and model developing for sustaining kaizen implementation. Peacock shoe is one of the manufacturing industries in Ethiopia facing challenges on sustaining. The methodology followed is factor analysis and empirically testing hypothesis. A database was designed using SPSS version 20. The survey was validated using statistical validation using the Cronbach alpha index; the result is 0.908. The KMO index value was obtained for the 32 items and had a value of 0.642 with Bartlett's Test of Sphericity Approx. Chi-Square 4503.007, degree of freedom 496 and significance value 0.000. A factor analysis by principal components and varimax rotation was applied for finding the critical success factors. Finding designates that 32 items were merged into eight critical success factors. All the eight factors together explain for 76.941 % of the variance. Multiple regression model analysis has indicated that some of the critical success factors had relationship with success indicators. Due to constraint of time, the researcher focused only at peacock shoe manufacturing industry. Other limitation also includes the absence of any local research that shows the critical success factors at the moment.

  8. Development and validation of resource flexibility measures for manufacturing industry

    Directory of Open Access Journals (Sweden)

    Gulshan Chauhan

    2014-01-01

    Full Text Available Purpose: Global competition and ever changing customers demand have made manufacturing organizations to rapidly adjust to complexities, uncertainties, and changes. Therefore, flexibility in manufacturing resources is necessary to respond cost effectively and rapidly to changing production needs and requirements.  Ability of manufacturing resources to dynamically reallocate from one stage of a production process to another in response to shifting bottlenecks is recognized as resource flexibility. This paper aims to develop and validate resource flexibility measures for manufacturing industry that could be used by managers/ practitioners in assessing and improving the status of resource flexibility for the optimum utilization of resources. Design/methodology/approach: The study involves survey carried out in Indian manufacturing industry using a questionnaire to assess the status of various aspects of resource flexibility and their relationships. A questionnaire was specially designed covering various parameters of resource flexibility. Its reliability was checked by finding the value of Cronback alpha (0.8417. Relative weightage of various measures was found out by using Analytical Hierarchy Process (AHP. Pearson’s coefficient of correlation analysis was carried out to find out relationships between various parameters. Findings: From detailed review of literature on resource flexibility, 17 measures of resource flexibility and 47 variables were identified. The questionnaire included questions on all these measures and parameters. ‘Ability of machines to perform diverse set of operations’ and ability of workers to work on different machines’ emerged to be important measures with contributing weightage of 20.19% and 17.58% respectively.  All the measures were found to be significantly correlated with overall resource flexibility except ‘training of workers’, as shown by Pearson’s coefficient of correlation. This indicates that

  9. 77 FR 69634 - International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug...

    Science.gov (United States)

    2012-11-20

    ...] International Conference on Harmonisation; Guidance on Q11 Development and Manufacture of Drug Substances... Administration (FDA) is announcing the availability of a guidance entitled ``Q11 Development and Manufacture of... guidance is intended to apply only to the manufacture of drug substance, not the manufacture of finished...

  10. Development of a virtual manufacturing assembly simulation system

    Directory of Open Access Journals (Sweden)

    Abdulrahman M Al-Ahmari

    2016-03-01

    Full Text Available Assembly operations are a key component of modern manufacturing systems. Designing, planning, and conducting assembly operations represent an important part of the cost of a product. Virtual reality provides an efficient and cost-effective solution to manufacturing design, planning, and prototyping. Still there are certain issues (such as data translation, integration of various hardware and software systems, and real-time collision detection faced while applying this advanced technology to the assembly domain. For example, existing works focus on using virtual reality systems and environments mainly to design new products and to plan for assembly. Little focus has been given to develop virtual reality environments that contribute to train operators on assembly operations and to bridge the gap between design and implementation/execution of assembly. Therefore, the research work presented in this article focuses on developing a fully functional virtual manufacturing assembly simulation system that solves the issues related to virtual reality environments. The proposed system uses a virtual environment to create an interactive workbench that can be used for evaluating assembly decisions and training assembly operations. It is a comprehensive system that provides visual, auditory, tactile, as well as force feedback. The system works successfully even with large components.

  11. Permafrost and urban Development in Norilsk Russia.

    Science.gov (United States)

    Shiklomanov, N. I.; Streletskiy, D. A.; Grebenets, V. I.

    2017-12-01

    The city of Norilsk was established in 1935 as a GULAG mining and metallurgy work camp to explore the rich deposits of non-ferrous metals. By the 1989, the population of Norilsk reached 179,757 people. Two additional cities were developed in proximity to Norilsk in the 1960s-1980s: Talnakh (1989 population 65,710); and Kaerkan (1989 population 29,824) making the Norilsk region a major Arctic metropolis. While such rapid growth is not unusual for developing industrial cities, the geographic location makes Norilsk rather unique among world urban centers. It was built in Central Siberia at 69°51' N latitude (above the Arctic Circle), in region characterized by harsh subarctic climate (mean annual temperature around -10 oC), over forest tundra/tundra transitional landscapes underlined by perennially frozen ground (permafrost). Throughout its existence, the Norilsk region was highly isolated: it is not connected to Russian road and railroad systems. The harsh environmental conditions provided significant and rather unique challenges to Norilsk development. Specifically, the presence of ice-rich permafrost imposed restrictions on application of standard urban planning and engineering practices. This presentation analyzes the history of permafrost construction in Norilsk. It shows how though initial trial and errors, a set of guiding principles and engineering methods of construction on permafrost were developed allowing a rapid urbanization of the area during the 1960-1980s. However, despite significant advances in permafrost engineering, the pronounced permafrost degradation has become evident in Norilsk by the mid 1980s and has accelerated rapidly since the mid 1990s resulting in widespread deformation of buildings. Climatic changes are frequently identified as a major cause of accelerated deterioration of infrastructure build on permafrost. However, we argue that other factors, including the complexity of interactions between deferent components of urban

  12. Population development in Ljubljana urban region

    Directory of Open Access Journals (Sweden)

    Dejan Rebernik

    2004-12-01

    Full Text Available The paper presents the main characteristic of population development and urbanisation processes in Ljubljana and Ljubljana urban region. Up to the end of the seventies fast population growth was a consequence of strong immigration from rural parts of Slovenia and the rest of Yugoslavia. In the eighties and nineties deconcentration of population within the region with intense suburbanisation and depopulation of inner city and older residential neighbourhoods were the main urbanisation processes. In the second half of the nineties the highest population growth was recorded in dispersed rural settlements in the periphery of the region. In some parts of the inner city reurbanisation and gentrification occurred.

  13. Characteristics of peri-urbanization of a secondary city: a challenge in recent urban development

    Science.gov (United States)

    Rahayu, P.; Mardiansjah, F. H.

    2018-03-01

    Urbanization process creates a tremendous spatial phenomenon since the last century. Especially for the country of the South, the phenomenon is still relevant to the situation today and the processes will still going until the foreseeable future. The metropolitan-based of urbanization process involves the development of peri-urban areas, which could be defined as transitional zones between city and rural areas characterized by integrated mixed-structures of agricultural and non-agricultural activities. This article reveals the characteristics of periurbanization process of an emerging secondary city in Java, which uses Surakarta, the second largest city in Central Java Province based on the population size, as the case. During the last ten years, there have been significant changes in peri-urban areas regarding urban population, land use, and urban activities that strengthening the contribution of the urban component into peri-urban system.

  14. Trends in innovation activities in manufacturing industries across development echelons

    Directory of Open Access Journals (Sweden)

    Abdullah M. Khan

    2017-07-01

    Full Text Available This empirical paper explores trends in innovation activities measured by a countries’ total patent application submission intensity relative to its population, and by analyzing U.S. granted patents data for cohorts of developed countries and developing countries. In addition to tabular and graphical analyses, I use a baseline regression model and a variant model thereof to assess the relative influence of a set of aggregate variables on innovation activities in eight manufacturing industries across two cohorts of countries (developed and developing where each cohort contains eight individual countries. Eight industries included in this study are: Chemical, Petroleum, electrical and electronics equipment, machinery, pharmaceutical, plastic, computer, and textile. The cohort of developed countries includes Australia, Canada, Czech Republic, France, Italy, Poland, Switzerland, and the United States. The cohort of developing countries includes Brazil, China, India, Malaysia, Mexico, Russia, South Africa, and Turkey. Per regression results, ethnic diversity is a statistically significant positive determinant of innovation for all industry aggregate patent count for both high income and developing countries. Also, per capita electricity usage, R&D expenditure as percent of GDP, and percent of population with internet access are three positive factors of innovation irrespective of industrial subsectors and position of a country in the development echelon. Interestingly, impact of ICT-services export is statistically significant and innovation boosting in developing countries in the cohort relative to countries in the cohort of developed countries. It also appears that trade openness served as a stronger stimulant of innovation activities for developing countries’ but not as much for the cohort of developed or high-income countries. This paper attempts to extend the literature on cross-country comparison of innovation activities by using two

  15. Sustainable Land Development In An Urban Context

    Directory of Open Access Journals (Sweden)

    Kauko Tom

    2015-09-01

    Full Text Available It can be argued that sustainable urban land development depends on the long-term viability and management success of local economic development. It can be further argued that here, economic sustainability is the key. This would furthermore signify a paradigm change to long-term administrative behavior (via an institutional approach, long-term market behavior (heterodox economics approach, and human behavior in actors’ consumption and location choices (behavioral approach. This article examines two criteria within this discourse: innovativeness and social cohesion. In doing so, it proposes a framework for empirical analysis where it is suggested that western, post-socialist and low developed cases choose different strategies due to their different starting points.

  16. Networks as Tools for Sustainable Urban Development

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Tollin, Nicola

    will be discussed through a case study of a Danish municipal network on Sustainable Development, Dogme 20001. This network has become quite successful in terms of learning and innovation, committing actors, and influencing local policies, to a larger extent than other SUD-networks the municipalities are involved in....... By applying the GREMI2-theories of “innovative milieux” (Aydalot, 1986; Camagni, 1991) to the case study, we will suggest some reasons for the benefits achieved by the Dogme-network, compared to other networks. This analysis will point to the existence of an “innovative milieu” on sustainability within......Due to the increasing number of networks related to sustainable development (SUD) the paper focuses on understanding in which way networks can be considered useful tools for sustainable urban development, taking particularly into consideration the networks potential of spreading innovative policies...

  17. A methodology for developing anisotropic AAA phantoms via additive manufacturing.

    Science.gov (United States)

    Ruiz de Galarreta, Sergio; Antón, Raúl; Cazón, Aitor; Finol, Ender A

    2017-05-24

    An Abdominal Aortic Aneurysm (AAA) is a permanent focal dilatation of the abdominal aorta at least 1.5 times its normal diameter. The criterion of maximum diameter is still used in clinical practice, although numerical studies have demonstrated the importance of biomechanical factors for rupture risk assessment. AAA phantoms could be used for experimental validation of the numerical studies and for pre-intervention testing of endovascular grafts. We have applied multi-material 3D printing technology to manufacture idealized AAA phantoms with anisotropic mechanical behavior. Different composites were fabricated and the phantom specimens were characterized by biaxial tensile tests while using a constitutive model to fit the experimental data. One composite was chosen to manufacture the phantom based on having the same mechanical properties as those reported in the literature for human AAA tissue; the strain energy and anisotropic index were compared to make this choice. The materials for the matrix and fibers of the selected composite are, respectively, the digital materials FLX9940 and FLX9960 developed by Stratasys. The fiber proportion for the composite is equal to 0.15. The differences between the composite behavior and the AAA tissue are small, with a small difference in the strain energy (0.4%) and a maximum difference of 12.4% in the peak Green strain ratio. This work represents a step forward in the application of 3D printing technology for the manufacturing of AAA phantoms with anisotropic mechanical behavior. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Introduction: population migration and urbanization in developing countries.

    Science.gov (United States)

    Kojima, R

    1996-12-01

    This introductory article discusses the correlation between migration and rapid urbanization and growth in the largest cities of the developing world. The topics include the characteristics of urbanization, government policies toward population migration, the change in absolute size of the rural population, and the problems of maintaining megacities. Other articles in this special issue are devoted to urbanization patterns in China, South Africa, Iran, Korea and Taiwan as newly industrialized economies (NIEs), informal sectors in the Philippines and Thailand, and low-income settlements in Bogota, Colombia, and India. It is argued that increased urbanization is produced by natural population growth, the expansion of the urban administrative area, and the in-migration from rural areas. A comparison of urbanization rates of countries by per capita gross national product (GNP) reveals that countries with per capita GNP of under US$2000 have urbanization rates of 10-60%. Rates are under 30% in Africa, the Middle East, South Asia, China, and Indonesia. Rapid urbanization appears to follow the economic growth curve. The rate of urbanization in Latin America is high enough to be comparable to urbanization in Europe and the US. Taiwan and Korea have high rates of urbanization that surpass the rate of industrialization. Thailand and Malaysia have low rates of urbanization compared to the size of their per capita GNP. Urbanization rates under 20% occur in countries without economic development. Rates between 20% and 50% occur in countries with or without industrialization. East Asian urbanization is progressing along with industrialization. Africa and the Middle East have urbanization without industrialization. In 1990 there were 20 developing countries and 5 developed countries with populations over 5 million. In 10 of 87 developing countries rural population declined in absolute size. The author identifies and discusses four patterns of urban growth.

  19. Sustainable urban development and industrial pollution

    Directory of Open Access Journals (Sweden)

    Petrović Julka

    2016-01-01

    Full Text Available Sustainable development of cities is highly connected with the pollution generated from industrial facilities and power plants. Both affect quality of air, weather, health and quality of life. The main goal of this paper is to determine the impact of selected weather parameters on the pollution from mentioned plants. From the research results, it can be concluded that sustainable urban development and welfare of citizens are dependent on causal relationship between pollution and weather. The greatest level of impact was recorded for nitric dioxide. In the case of carbon monoxide, the level of impact is the middle. The lowest level was recorded for particulate matter. The biggest impact on the carbon monoxide emission and particulate matter is that of air pressure, whereas temperature has the biggest impact on nitrogen dioxide emission. The research shows that air humidity and wind speed do not have a significant impact on the emission of pollutants from the plants. Research shows need for further studies in the field of impact of pollution from industry on urban weather and human health.

  20. Leading for Urban School Reform and Community Development

    Science.gov (United States)

    Green, Terrance L.

    2015-01-01

    Purpose: Improving urban schools of color and the communities where they are located requires leadership that spans school and community boundaries. The purpose of this study is to understand how principal and community leader actions support urban school reform along with community development at two community schools in the urban Midwest and…

  1. Measuring the Development Patterns of Urban Villages in Shenzhen

    NARCIS (Netherlands)

    Hao, P.; Geertman, S.C.M.; Hooimeijer, P.; Sliuzas, R.

    2011-01-01

    Urban villages are widespread in many Chinese cities, providing affordable and accessible housing for rural migrants. These urban villages are developed by the indigenous village population base on a self-help approach and in an unauthorized style. Consequently, urban villages are characterized by

  2. Spatial diversity of urban village development in Shenzhen

    NARCIS (Netherlands)

    Hao, P.|info:eu-repo/dai/nl/341235814; Geertman, S.C.M.|info:eu-repo/dai/nl/072392924; Hooimeijer, P.|info:eu-repo/dai/nl/073398578; Sliuzas, R.

    2011-01-01

    Dynamic urbanization in China during the reform period has led to the emergence and proliferation of so-called urban villages in many cities. The development of urban villages, based on a self-help approach of indigenous villagers, has been satisfying great demand for migrant housing and space for

  3. Developing Resilient Urban Waterfronts : Integrating Adaptation into Urban Development and Management

    NARCIS (Netherlands)

    van Veelen, P.C.; Deppisch, Sonja

    2017-01-01

    There is a growing attention for integrating climate change adaptation into policies, strategies and decision-making processes (e.g. mainstreaming). This paper explores to what extent climate adaptation can be integrated into processes of urban development and change, based on case study research in

  4. The European Dimension of the Global Urban Development Program

    Directory of Open Access Journals (Sweden)

    Bubenko Pavlo T.

    2017-11-01

    Full Text Available The article is aimed at studying the process of evolutionary formation of the EU Cities Development Program and analyzing the strategic instrumentarium for the urban development within the currently established EU urban policy at the present stage. The key features of the process of formation of the EU urban policy have been analyzed, the main stages of evolutionary formation of the integrated EU Cities Development Program have been defined and described. In the context of ensuring an integrated approach to the sustainable urban development and complementary positioning of urban development in the EU’s territorial development and cohesion strategies, the European Union’s normative and legal framework on urban development was researched. As a result of the conducted research, the strategic instrumentarium of implementation of the EU Cities Development Program has been systematized.

  5. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian; Matzen, Detlef; McAloone, Tim C.

    2009-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer activities and product life cycle considerations. Literature offers a range of serviceoriented design strategies from product-oriented DfX approaches to more customer......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to begin to understand how manufacturing...... companies may align their business strategies with their product and service development activities....

  6. Strategies for Designing and Developing Services for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian Ronald; Matzen, Detlef; McAloone, Tim C.

    2010-01-01

    Product/service-systems (PSS) are in effect an approach to designing integrated products and services with a focus on both customer- and product life cycleactivities . Literature offers a range of service-oriented design strategies from product-oriented DfX approaches to more customer...... manufacturing companies may align their product and service development activities with their business strategies.......-oriented approaches such as integrated solutions and service design. These design strategies are mapped out in relation to how applicable they are to different types of services. Case studies from two industrial companies are used to confront the existing literature in order to improve understanding of how...

  7. New developments in coordinate measuring machines for manufacturing industries

    Directory of Open Access Journals (Sweden)

    Hammad Mian S.

    2014-01-01

    Full Text Available There have been substantial improvements in measurement systems in order to meet fluctuating market demands. This rapid change and development in measurement technology has primarily been governed by demands of accuracy and precision from aerospace, automotive and other manufacturing industries. Coordinate measuring machines (CMMs available with different technologies and configurations has efficiently been fulfilling customer demands for more than a decade. Though, current CMMs can meet needs of rapid and increased demands of customers to a greater extent but still there is lot of scope for improvement and development in CMMs. The globalization of manufacturing has resulted in development of variety of complex products and miniaturization of mechanical components. The technology of micro/nano-scale 3D measurement is still a bottleneck for industries. Therefore, precise and accurate system which is flexible enough to deal with complexities of parts and micro & nano range products has to be investigated. In this paper, comprehensive review concerning CMMs with capabilities to measure micro/nano features has been presented. This work has also discussed different methods to estimate measurement uncertainty, as well as performance evaluation of CMMs. Moreover, novel concepts such as intelligent CMM, multi-sensor CMM, virtual CMM have been presented.

  8. The quest for synergy when developing the urban fringe

    DEFF Research Database (Denmark)

    Hansen, Jesper Rohr; Engberg, Lars A.

    How can planning policies related to urban fringe development and disadvantaged neighbourhoods create synergy? This question is approached and answered by various research fields and explored on various urban-planning levels, displaying case-studies related to urban regeneration, post......-industrial and suburban development and urban fringe literature. The present paper adds to these discussions by analysing two case-studies in Denmark in which local government pursue traditional urban-growth strategies in urban-fringe development - a post-industrial harbour and a large suburb, located just outside...... analyses this synergy by first describing the legislative, interventionist and financial context for urban-growth strategies deployed in the cases. On this background, the paper explores synergy potential related to policy as well as private-sector actors (local businesses, social housing organizations...

  9. Development of manufacturing equipment and QC equipment for DUPIC fuel

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J.J.; Lee, J.W.; Kim, S.S.; Yim, S.P.; Kim, J.H.; Kim, K.H.; Na, S.H.; Kim, W.K.; Shin, J.M.; Lee, D.Y.; Cho, K.H.; Lee, Y.S.; Sohn, J.S.; Kim, M.J.

    1999-05-01

    In this study, DUPIC powder and pellet fabrication equipment, welding system, QC equipment, and fission gas treatment are developed to fabricate DUPIC fuel at IMEF M6 hot cell. The systems are improved to be suitable for remote operation and maintenance with the manipulator at hot cell. Powder and pellet fabrication equipment have been recently developed. The systems are under performance test to check remote operation and maintenance. Welding chamber and jigs are designed and developed to remotely weld DUPIC fuel rod with manipulators at hot cell. Remote quality control equipment are being tested for analysis and inspection of DUPIC fuel characteristics at hot cell. And trapping characteristics is analyzed for cesium and ruthenium released under oxidation/reduction and sintering processes. The design criteria and process flow diagram of fission gas treatment system are prepared incorporating the experimental results. The fission gas treatment system has been successfully manufactured. (Author). 33 refs., 14 tabs., 91 figs

  10. Using Additive Manufacturing to Reduce the Cost of Instrument Development

    Data.gov (United States)

    National Aeronautics and Space Administration — Additive Manufacturing (AM), commonly known as 3D printing, is widely used in the commercial sector for the manufacture of consumer goods, high performance parts for...

  11. Blue-Green Solutions in Urban Development

    Science.gov (United States)

    Karlsson, Caroline; Kalantari, Zahra

    2017-04-01

    With the ongoing urbanisation and increasing pressure for new housing and infrastructure, the nexus of developing compact, energy-efficient and yet liveable and sustainable cities is urgent to address. In this context, blue-green spaces and related ecosystem services (ES) are critical resources that need to be integrated in policy and planning of urban. Among the ES provided by blue-green spaces, regulating ES such as water retention and purification are particularly important in urban areas, affecting water supply and quality, related cultural ES and biodiversity, as well as cities potential to adapt to climate change. Blue-green infrastructure management is considered a sustainable way to reducing negative effects of urbanisation, such as decreasing flood risks, as well as adapting to climate change for example by controlling increasing flood and drought risks. Blue-green infrastructure management can for example create multifunctional surfaces with valuable environmental and social functions and generally handle greenways and ecological networks as important ecosystem service components, for example for stormwater regulation in a sustainable urban drainage system. The Norrström drainage basin (22,000 km2) is a large demonstrator for Blue-green infrastructure management. Both urbanisation and agriculture are extensive within this basin, which includes the Swedish capital Stockholm and is part of the fertile Swedish belt. Together, the relatively high population density combined with agricultural and industrial activities in this region imply large eutrophication and pollution pressures, not least transferred through storm runoff to both inland surface waters and the coastal waters of the Baltic Sea. The ecosystems of this basin provide highly valued but also threatened services. For example, Lake Mälaren is the single main freshwater supply for the Swedish capital Stockholm, as well as a key nutrient retention system that strongly mitigates waterborne nutrient

  12. Urban Land Allocation Model of Territorial Expansion by Urban Planners and Housing Developers

    Directory of Open Access Journals (Sweden)

    Carolina Cantergiani

    2017-12-01

    Full Text Available Agent-based models have recently been proposed as potential tools to support urban planning due to their capacity to simulate complex behaviors. The complexity of the urban development process arises from strong interactions between various components driven by different agents. AMEBA (agent-based model for the evolution of urban areas is a prototype of an exploratory, spatial, agent-based model that considers the main agents involved in the urban development process (urban planners, developers, and the population. The prototype consists of three submodels (one for each agent that have been developed independently and present the same structure. However, the first two are based on a land use allocation technique, and the last one, as well as their integration, on an agent-based model approach. This paper describes the conceptualization and performance of the submodels that represent urban planners and developers, who are the agents responsible for officially launching expansion and defining the spatial allocation of urban land. The prototype was tested in the Corredor del Henares (an urban–industrial area in the Region of Madrid, Spain, but is sufficiently flexible to be adapted to other study areas and generate different future urban growth contexts. The results demonstrate that this combination of agents can be used to explore various policy-relevant research questions, including urban system interactions in adverse political and socioeconomic scenarios.

  13. Third-world development: urbanizing for the future.

    Science.gov (United States)

    Mcilwaine, C

    1997-01-01

    This article reviews some issues reflected in the 1996 UN Habitat II agenda and recent research on urbanization. The themes of the 1996 Habitat conference were urban development, urban poverty, and governance, civil society, and social capital. It is expected that over 50% of total world population will live in cities in the year 2000. Cities are viewed both as engines of economic growth and centers of severe economic, environmental, and social problems. There is some disagreement about whether cities are rational economic structures or what the World Bank's urban agenda is and its relationship with macroeconomic policy. Discussions of global urban issues are criticized for their neglect of issues of equity and poverty, cultural diversity, and identity and representation. Habitat II also stressed urban sustainability. There is growing recognition that urban management involves more than the "Brown Agenda" of environmental and physical aspects of urban growth. Recent studies identify how politics and power affect people's access to basic urban services. Urban economic activity can also contribute to environmental problems. Urban growth affects the provision of health services. Although there is not a consensus on the role of cities in expanding economic and social development and the best management practices, there is sufficient evidence to indicate that urban processes are varied throughout the developing world. The links between urban and rural areas differentiate cities and expose the need to understand the role of intermediate urban areas surrounding and between larger cities. Poverty has become increasingly urbanized, but the extent of poverty is unknown. Habitat II was an unprecedented effort to engage nongovernment groups, local government staff, trade unions, and the private sector and to emphasize community participation. Networks of trust and reciprocity are key to solving poverty, inequality, and disempowerment problems.

  14. Urban development in Freiburg, Germany – sustainable and neoliberal?

    Directory of Open Access Journals (Sweden)

    Mössner, Samuel

    2015-09-01

    Full Text Available In recent years, sustainable urban development has emerged as a relevant but contested field in urban studies. A broad and diverse literature has discussed sustainable development from various perspectives. Some authors have researched urban sustainability from a technocratic perspective, looking for technical and managerial solutions. Others have shed light on the political dimension of urban sustainable development in our times of urban neoliberalization. This branch of literature focuses on the problematic relationship between market-oriented growth on the one hand and aspects of equality and justice on the other hand, which come along with the idea of sustainability. This article argues that the professionalization and new forms of urban management, as well as a shift towards urban governance and citizens’ participation have intensified consensual practices of urban regulation. Sustainable politics that have occurred in many cities around the world place emphasis on justice, tolerance and participation as the principal drivers for urban development. Empirical evidence shows, however, that these goals are subjugated to economic growth. Drawing on empirical work carried out in Freiburg, Germany – a city long hailed as a forerunner of urban sustainable development – this article promotes the opinion that the idea of ‘sustainable development’ in its current form is nothing more than an oxymoron, aimed and invented as a fuzzy concept in order to disguise the fundamentalist believe in growth that lies beyond such development.

  15. SUSTAINABLE URBAN COMMUNITY DEVELOPMENT THROUGH AGENDA 21

    Directory of Open Access Journals (Sweden)

    Zainal Md Zan

    2015-08-01

    Full Text Available The much-talked about issues such as the rising of heavy crime cases, problems in solid waste management, air and water pollution as well as traffic congestion detering the quality of life among urban community members. Urgent and proactive measure is highly desireable in order to preserve and maintain the integral parts of urban’s higher quality of life. All parties should take part in ongoing efforts to achieve sustainable development through various means. Local Agenda 21 (LA21 serves as one of the efforts in achieveing the ultimate goal of sustainable development through better collaboration and cooperation among stakeholders including local government, non-governmental organisations and the community at large. The core principle of the LA21 program lies in the spirit of cooperation among community members, local authorities and the private sectors. This could be achieved through various activities including from the beginning such as through a comprehensive planning for the local area to achieve the sustainable development. Community members should be involved in brainstorming of the ideas and expressing their views so that authorities would be able to identify the real and arising issues in the community. Through this way a sustainable town and municipal planning could be developed and initiated. This paper discusses the importance of urbancommunity participation in achieving sustainable development as practicedthrough LA21 in Seberang Perai Municipal Council, Penang.

  16. The development of zirconium alloy and its manufacturing

    International Nuclear Information System (INIS)

    Yuan Gaihuan; Yue Qiang

    2015-01-01

    Nuclear power which acts as one of low-carbon energy resources is the most realistic in large-scale application. It is also the preferred choice for many countries to develop energy resources and optimize its structure. Zirconium alloy is a key structural material for nuclear power plant fuel assemblies and cladding tubes of zirconium alloy are often referred as the first safeguard to nuclear power safety. With the development of nuclear power, three kinds of zirconium alloys Zr-Sn, Zr-Nb, Zr-Sn-Nb and with the representative products of Zr-4, M5, Zirlo respectively are developed and widely applied. Because of its severe operating environment and influence to nuclear safety, the requirements to zirconium alloys for physical and chemical properties, nuclear capability, tolerance and surface quality are very strict. The in-depth research and its manufacture capability become one of the main barriers for many countries who are developing the nuclear energy. In recent years, a stated-owned company, State Nuclear Bao Ti Zirconium Industry Company ('SNZ' for short) as well as National R and D Center for Nuclear Grade Zirconium material, is founded to meet the requirement of the rapid development of China's nuclear power industry. SNZ is dedicated for the fabrication and the research of nuclear grade zirconium products. After the successful completion of technology transfer of manufacturing for production chain and fully grasped of the manufacturing technology for the nuclear grade zirconium sponge through zirconium alloy tube, rod and strip products. National R and D Center for Nuclear Grade Zirconium material is cooperating with universities, nuclear energy research and design institutes and the owners of nuclear power plant to develop new zirconium alloy of self-owned brand. Through the selection of components, in-process testing and product inspection, four kinds of new zirconium alloys owns better performance than currently commercialized M5, Zirlo etc

  17. Development and validation of a multidimensional measure of lean manufacturing

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2010-02-01

    Full Text Available In the last 30 years of research of lean manufacturing many different questionnaires was proposed to check the degree of the use of the concept. The set of the items used changed considerably from one investigation to another one. Until now isn’t appreciate a movement that converge towards the use, by the investigators, of a few instruments whose validity and reliability have been compared in different surroundings. In fact, the majority of investigations are based on ad-hoc questionnaires and a few of them present the questionnaire validation checking only the unidimensionality and -Cronbach. Nevertheless it seems to have a consensus in identifying 5 big constructs that compose the lean manufacturing (TQM, JIT, TPM, supply chain management and high-involvement. Our research has consisted of identifying and summarizing the models that have been published previously to add the items in constructs or sub-scales of constructs. Later we developed an integrating questionnaire, starting off of the items that appeared in previous investigations. Finally we realized the sub-scales and models validation through a confirmatory factorial analysis, using date of a sample of Spanish Sheltered Work Centre’s (N=128. Of all proposed models, the best an adjustment takes place with the first order model with 20 sub-scales. Our investigation contributes to an integrating vision of the published models and the lean manufacturing sub-scales validity and reliability verification raised by other investigators. Due to his confirming approach, it can serve as generalization of studies that had been realized in contexts with different samples to which we have used for the replication.

  18. Development of manufacturing technology for ITER TF Coil Structure

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Takeru, E-mail: sakurai.takeru@jaea.go.jp; Iguchi, Masahide; Nakahira, Masataka; Inagaki, Takashi; Matsui, Kunihiro; Koizumi, Norikiyo

    2016-11-01

    Highlights: • Heavy thick welding (Max. 287 mm) was performed by balance welding. • Figured out Attachment welding deformation including heavy thick welding. • The deformation of Segments welding was suppressed to 1/3 of previous method. • Based on this study, JAEA started actual ITER TF coil structure manufacturing. - Abstract: Japan Atomic Energy Agency (JAEA) performed a trial of A1 Segment manufacturing of Toroidal Field (TF) coil structure, which is a piece with a radius of curvature 3 m with square channel for coil. Even though both-side welding (balance welding) was preferred to one-side welding considering the welding deformation, it could not be applied to the previous trial due to the difficulty of overhead or horizontal welding by machine. Hence, one-side welding with strong restriction jig was applied in the previous trials. In the latest trial, JAEA adopted a manual balance welding with a development of manufacturing technology. As the result of A1 Segment Mainbody welding trial, welding deformation of the Outer Plate and the Side Plate could have been controlled closer to the target value. JAEA also tried Attachments welding, in which Pre-Compression Flange (PCF) and Extension are welded to A1 Segment Mainbody, and a Segments welding trial, which is a weld between A1 Segment and a part of A2 Segment. A2 Segment is a 3 m straight part with square channel for coil. The inclination of A1 Segment and A2 Segment due to the welding was 2.7 mm. By applying balance welding, the deformation by Segments welding was suppressed to about 1/3 of the one-side welding. The views and opinions expressed herein do not necessarily reflect those of the ITER Organization.

  19. City Planning Evolution - Urban Development Directions in the Transition Period

    Directory of Open Access Journals (Sweden)

    Mircea Grigorovschi

    2010-03-01

    Full Text Available Urban evolution post 1989 has a series of specific characteristics mainly on a spatial-territorial plane. Determination of the main developing factors and urban evolution directions (dimensions, rhythm, expansion level, centrifugal and axial character, concentric, centripetal, functional evolution, tendencies and social implications, etc. represents a necessity and obligation for action from professionals in urban and landscaping fields. This necessity even arises from the perspective of the need for realizing strategies, planning, documentation and urban studies, which must intervene correctively in the evolution of areas with structural problems and to guide urban evolution towards the main goal namely the growth in residential quality of life in human settlements.

  20. Urbanization and economic development: a bias toward large cities?

    Science.gov (United States)

    Moomaw, R L; Shatter, A M

    1996-01-01

    "We find that a nation's urban population percentage increases with GDP per capita; industrialization; export orientation; and possibly, foreign assistance. It decreases with the importance of agriculture. Industrialization and agricultural importance have the same implications for the concentration of urban population in cities with 100,000+ population as for the urban percentage. Greater export orientation reduces such concentration. Finally, GDP per capita, population, and export orientation reduce primacy. Political factors, such as whether a country's largest city is also its capital, affect primacy. Our results do not seem to imply that developing-country urbanization today differs fundamentally from urbanization in the past." excerpt

  1. A product-process approach for development of the manufacturing footprint

    DEFF Research Database (Denmark)

    Farooq, Sami; Yang, Cheng; Johansen, John

    2009-01-01

    to ever changing global business environment there are certain other external factors that act as drivers for the manufacturing facility development process and therefore should be given considerable importance as they play a major role in defining the future footprint of a manufacturing organisation....... elaborating the development and establishment of various manufacturing facilities of a Danish pump manufacturer is then described. The discussion from the case leads to the conclusion that developing new manufacturing facilities can be explained using existing theories of manufacturing strategy. However due...

  2. U.S. Offshore Wind Manufacturing and Supply Chain Development

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Bruce Duncan [Navigant Consulting, Inc.

    2013-02-22

    The objective of the report is to provide an assessment of the domestic supply chain and manufacturing infrastructure supporting the U.S. offshore wind market. The report provides baseline information and develops a strategy for future development of the supply chain required to support projected offshore wind deployment levels. A brief description of each of the key chapters includes: » Chapter 1: Offshore Wind Plant Costs and Anticipated Technology Advancements. Determines the cost breakdown of offshore wind plants and identifies technical trends and anticipated advancements in offshore wind manufacturing and construction. » Chapter 2: Potential Supply Chain Requirements and Opportunities. Provides an organized, analytical approach to identifying and bounding the uncertainties associated with a future U.S. offshore wind market. It projects potential component-level supply chain needs under three demand scenarios and identifies key supply chain challenges and opportunities facing the future U.S. market as well as current suppliers of the nation’s land-based wind market. » Chapter 3: Strategy for Future Development. Evaluates the gap or competitive advantage of adding manufacturing capacity in the U.S. vs. overseas, and evaluates examples of policies that have been successful . » Chapter 4: Pathways for Market Entry. Identifies technical and business pathways for market entry by potential suppliers of large-scale offshore turbine components and technical services. The report is intended for use by the following industry stakeholder groups: (a) Industry participants who seek baseline cost and supplier information for key component segments and the overall U.S. offshore wind market (Chapters 1 and 2). The component-level requirements and opportunities presented in Section 2.3 will be particularly useful in identifying market sizes, competition, and risks for the various component segments. (b) Federal, state, and local policymakers and economic development

  3. COORDINATES OF THE DEVELOPMENT OF TOURISM IN URBAN AREA

    Directory of Open Access Journals (Sweden)

    Carmen-Maria IORDACHE

    2012-01-01

    Full Text Available Internationally, urban tourism began to develop gradually from the '80s, nowadays being a distinct form of tourism whose importance is increasing. Thus, there were concerns about specific facilities for different categories of visitors and their harmonization with the demands of caring for the smooth functioning of urban settlements. By adding tourism to the local economy inventory activities of an urban area, it can be considered a catalyst and a reviving factor for strengthening urban cities especially because it represents an important source of income and it is responsible for creating thousands of jobs. Given the need to adapt to the demands of tourists, this paper attempts to clarify some issues related to content, characteristics and influencing factors of urban tourism, but also the adoption of policies for exploitation through tourism of the specific elements of urban space and urban tourism prospects.

  4. Atomic and close-to-atomic scale manufacturing—A trend in manufacturing development

    Science.gov (United States)

    Fang, Fengzhou

    2016-12-01

    Manufacturing is the foundation of a nation's economy. It is the primary industry to promote economic and social development. To accelerate and upgrade China's manufacturing sector from "precision manufacturing" to "high-performance and high-quality manufacturing", a new breakthrough should be found in terms of achieving a "leap-frog development". Unlike conventional manufacturing, the fundamental theory of "Manufacturing 3.0" is beyond the scope of conventional theory; rather, it is based on new principles and theories at the atomic and/or closeto- atomic scale. Obtaining a dominant role at the international level is a strategic move for China's progress.

  5. Using GIS for Developing Sustainable Urban Growth Case Kyrenia Region

    Science.gov (United States)

    Kara, C.; Akçit, N.

    2018-03-01

    It is critical to develop urban layers for analysis sustainable urban development possibilities within planning process. Kyrenia Region has many physical, environmental or economic issues that may danger the growth possibilities in sustainable manner. From this point, this study uses different spatial layers such as slope, distance to roads, distance to central zone, vegetation, soil productivity, environmental protection zones, distance to open/green space, distance to education for supporting sustainable urban growth policies and define suitable areas for urban development within this perspective. The study tries to convert sustainable urban growth policies such as; compact growth, environmental protection, equal accessibility to basic services; into spatial layers and establish proper framework for multi criteria evaluation in Kyrenia Region within using geographical information systems. It shows suitability values for Kyrenia region and constraints zones at final section. It clearly presents the suitable areas for the sustainable urbanization and also unsuitable or risky areas for reducing the possible disasters and may happen in the future.

  6. Population in urban development and the practical problems of urban planning policy in Africa

    Directory of Open Access Journals (Sweden)

    Joseph Uyanga

    2013-07-01

    Full Text Available The paper analyses the pattern of recent growth in African towns, examines the population component in this growth process and discusses the attendant urban planning problems. The contention in the study is that there are problems of definition. policy enunciation, and organisational co-ordination in the conceptualization. planning. orchestration and implementation of urban development and service systems. The magnitude of African urban developmental problems, and its multi-faceted nature demands that the latest in scientific knowledge and technological innovations should be integrated and incorporated into the urban planning and implementation processes.

  7. 76 FR 38187 - International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of...

    Science.gov (United States)

    2011-06-29

    ...] International Conference on Harmonisation; Draft Guidance on Q11 Development and Manufacture of Drug Substances... Manufacture of Drug Substances.'' The draft guidance was prepared under the auspices of the International... that a draft guidance entitled ``Q11 Development and Manufacture of Drug Substances'' should be made...

  8. Manufacturing development of the Westinghouse Nb3Sn coil for the Large Coil Test Program

    International Nuclear Information System (INIS)

    Young, J.L.; Vota, T.L.; Singh, S.K.

    1983-01-01

    The Westinghouse Nb 3 Sn Magnet for the Oak Ridge National Laboratory Large Coil Program (LCP) is currently well into the manufacturing phase. This paper identifies the manufacturing processes and development tasks for his unique, advanced coil

  9. Urban Environment Development based on Universal Design Principles

    Science.gov (United States)

    Harsritanto, Bangun Ir

    2018-02-01

    Universal Design is a design which facilitated full range of human diversity. By applying Universal design principles, urban environment can be more functional and more user-friendly for everyone. This study examined five urban streets of South Korea as a country experienced on developing various urban street designs based on universal design. This study aimed to examine and compare the South Korea cases using seven principles of universal design. The research methods of this study are literature study, case study, and site observation. The results of this study are: South Korea cases are good practices, urgency of implementing the direction into local regulations; and change of urban development paradigm.

  10. Pupil initiatives in urban nature trail development: PMB MOSS and ...

    African Journals Online (AJOL)

    A brief background to Greenbelt and urban nature trail development in Pietermaritzburg is provided. Negotiations and procedures initiated by standard 9 pupils in stimulating authorities and the public to recognise the need for urban trail development and metropolitan open space (MOSS) are outlined. long-term ...

  11. Rural And Urban Youth Participation In Community Development In ...

    African Journals Online (AJOL)

    The focused on participation in community development activities, constraints to and benefits derived from participation. It compared rural and urban youth participation in community development activities in Ido local government area of Oyo State. Proportionate random sampling was used to select 2 rural, 1 urban ...

  12. Urban agriculture and poverty alleviation in developing countries ...

    African Journals Online (AJOL)

    Urban agriculture has served for a long time as a vital asset in the livelihood strategies of urban households in developing countries. It has been considered since then as a relevant input in responding to the embryonic economic situation of developing countries resulting to the structural adjustment programs and increasing ...

  13. The Challenge of Urban and Regional Development in the Future

    Directory of Open Access Journals (Sweden)

    Tedjo Suminto

    2004-01-01

    Full Text Available The task of development is part of the overall national task carried out along governance. This task has been entrusted to the government as a gradual long-term task, planning, and sustainable. Implied in it, the intention to achieve a better state. Contained within the dimension of time setting goals, achieving goals, and overall utilization of benefits for citizens throughout the country. Enshrined also be aware that there will be found a variety of difficulties, limitations, and problems that must be solved. The problems of urban development in Indonesia can be viewed from two approaches, namely macro and micro approaches. A macro approach urban problems are reviewed in the context of the region (national scale. While the approach is seen as a micro city neighborhoods. This problem is closely related to the natural growth of the city population and population migration. Based on research on urban and regional development, it can be concluded: 1 the problem of urbanization of rural and small towns to large cities should be addressed; 2 urban spatial arrangements should be improved to do with increasingly limited land for development and urban development; 3 the provision of facilities and infrastructure of the city, city management, and financing of urban development, integration between government, society, and the private sector should be increased; 4 study of urban models that can accommodate all the problems of the city should be developed continuously.

  14. Development of an Urban Multilayer Radiation Scheme and Its Application to the Urban Surface Warming Potential

    Science.gov (United States)

    Aoyagi, Toshinori; Takahashi, Shunji

    2012-02-01

    To investigate how a three-dimensional structure such as an urban canyon can affect urban surface warming, we developed an urban multilayer radiation scheme. The complete consideration of multiple scattering of shortwave and longwave radiation using the radiosity method is an important feature of the present scheme. A brief description of this scheme is presented, followed by evaluations that compare its results with observations of the effective albedo and radiative temperature for urban blocks. Next, we calculate the urban surface warming potential (USWP), defined as the difference between the daily mean radiative temperature of urban surfaces (which are assumed to be black bodies), including their canyon effects and the daily mean temperature of a flat surface with the same material properties, under a radiative equilibrium state. Assuming standard material properties (albedo and emissivity of 0.4 and 0.9, respectively), we studied the sensitivity of the USWP to various aspect ratios of building heights to road widths. The results show that the temporally-averaged surface temperature of an urban area can be higher than that of a flat surface. In addition, we determined the overestimation of the effective temperature of urban surfaces induced by the overestimation of the radiation distribution to the walls when one uses a single-layer scheme for urban block arrays that have a low sky-view factor less than around 0.5.

  15. Workshop Report On Sustainable Urban Development

    Science.gov (United States)

    Langhoff, Stephanie; Martin, Gary; Barone, Larry; Wagener, Wolfgang

    2010-01-01

    The key workshop goal was to explore and document how NASA technologies, such as remote sensing, climate modeling, and high-end computing and visualization along with NASA assets such as Earth Observing Satellites (EOS) and Unmanned Aerial Vehicles (UAVs) can contribute to creating and managing a sustainable urban environment. The focus was on the greater Bay Area, but many aspects of the workshop were applicable to urban management at the local, regional and global scales. A secondary goal was to help NASA better understand the problems facing urban managers and to make city leaders in the Bay Area more aware of NASA's capabilities. By bringing members of these two groups together we hope to see the beginnings of new collaborations between NASA and those faced with instituting sustainable urban management in Bay Area cities.

  16. Urban agriculture in the developing world: a review

    OpenAIRE

    Orsini , Francesco; Kahane , Remi; Nono-Womdim , Remi; Gianquinto , Giorgio

    2013-01-01

    International audience; The year 2007 marked a critical event in the world history. For the first time, more than half of the world population now lives in cities. In many developing countries, the urbanization process goes along with increasing urban poverty and polluted environment, growing food insecurity and malnutrition, especially for children, pregnant and lactating women; and increasing unemployment. Urban agriculture represents an opportunity for improving food supply, health conditi...

  17. NETWORKING - THE URBAN AND REGIONAL DEVELOPMENT STRATEGY?

    Directory of Open Access Journals (Sweden)

    MARIA NOWICKA-SKOWRON

    2011-01-01

    Full Text Available The concept of innovations embraces everything that is connected with creation and application of new knowledge in order to win competitive advantage. A traditional approach applied by organizational and management sciences are not enough to explain and manage the development of enterprises as well as that of cities, regions and countries. According to a new approach to innovativeness, creation of innovations depends on a complex/system approach. A phenomenon of particular importance is the approach to network pro-innovation structures from the urban and regional point of view. What makes a network work is a mutual relation between actors who have same rights to access and participate in the network. The whole system must be perceived by every actor. Simultaneously, every actor is partially responsible for the whole. The nature of networking can be understood as a differentiated system of relations (particularly personal ones inside the network. Tolerance and trust are other foundations of information flow and information return.

  18. Progress in second-generation HTS wire development and manufacturing

    International Nuclear Information System (INIS)

    Selvamanickam, V.; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J.

    2008-01-01

    2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current x Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world's first 2G device installed in the grid

  19. Progress in second-generation HTS wire development and manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, V. [SuperPower, Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)], E-mail: vselva@superpower-inc.com; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J. [SuperPower, Inc., 450 Duane Avenue, Schenectady, NY 12304 (United States)

    2008-09-15

    2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current x Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world's first 2G device installed in the grid.

  20. Developing novel 3D antennas using advanced additive manufacturing technology

    Science.gov (United States)

    Mirzaee, Milad

    In today's world of wireless communication systems, antenna engineering is rapidly advancing as the wireless services continue to expand in support of emerging commercial applications. Antennas play a key role in the performance of advanced transceiver systems where they serve to convert electric power to electromagnetic waves and vice versa. Researchers have held significant interest in developing this crucial component for wireless communication systems by employing a variety of design techniques. In the past few years, demands for electrically small antennas continues to increase, particularly among portable and mobile wireless devices, medical electronics and aerospace systems. This trend toward smaller electronic devices makes the three dimensional (3D) antennas very appealing, since they can be designed in a way to use every available space inside the devise. Additive Manufacturing (AM) method could help to find great solutions for the antennas design for next generation of wireless communication systems. In this thesis, the design and fabrication of 3D printed antennas using AM technology is studied. To demonstrate this application of AM, different types of antennas structures have been designed and fabricated using various manufacturing processes. This thesis studies, for the first time, embedded conductive 3D printed antennas using PolyLactic Acid (PLA) and Acrylonitrile Butadiene Styrene (ABS) for substrate parts and high temperature carbon paste for conductive parts which can be a good candidate to overcome the limitations of direct printing on 3D surfaces that is the most popular method to fabricate conductive parts of the antennas. This thesis also studies, for the first time, the fabrication of antennas with 3D printed conductive parts which can contribute to the new generation of 3D printed antennas.

  1. Urban Big Data and the Development of City Intelligence

    Directory of Open Access Journals (Sweden)

    Yunhe Pan

    2016-06-01

    Full Text Available This study provides a definition for urban big data while exploring its features and applications of China's city intelligence. The differences between city intelligence in China and the “smart city” concept in other countries are compared to highlight and contrast the unique definition and model for China's city intelligence in this paper. Furthermore, this paper examines the role of urban big data in city intelligence by showing that it not only serves as the cornerstone of this trend as it also plays a core role in the diffusion of city intelligence technology and serves as an inexhaustible resource for the sustained development of city intelligence. This study also points out the challenges of shaping and developing of China's urban big data. Considering the supporting and core role that urban big data plays in city intelligence, the study then expounds on the key points of urban big data, including infrastructure support, urban governance, public services, and economic and industrial development. Finally, this study points out that the utility of city intelligence as an ideal policy tool for advancing the goals of China's urban development. In conclusion, it is imperative that China make full use of its unique advantages—including using the nation's current state of development and resources, geographical advantages, and good human relations—in subjective and objective conditions to promote the development of city intelligence through the proper application of urban big data.

  2. Developing Codes of Conduct for Manufacturers of College Apparel.

    Science.gov (United States)

    Nicklin, Julie L.

    1998-01-01

    Colleges and universities are establishing policies to ensure that clothing carrying their names are not being manufactured with "sweatshop" labor. The colleges' policies attempt to set acceptable standards for manufacturers producing the lucrative licensed lines. However, institutions are finding that it is difficult to enforce those…

  3. How Development and Manufacturing Will Need to Be Structured-Heads of Development/Manufacturing May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Nepveux, Kevin; Sherlock, Jon-Paul; Futran, Mauricio; Thien, Michael; Krumme, Markus

    2015-03-01

    Continuous manufacturing (CM) is a process technology that has been used in the chemical industry for large-scale mass production of chemicals in single-purpose plants with benefit for many years. Recent interest has been raised to expand CM into the low-volume, high-value pharmaceutical business with its unique requirements regarding readiness for human use and the required quality, supply chain, and liability constraints in this business context. Using a fairly abstract set of definitions, this paper derives technical consequences of CM in different scenarios along the development-launch-supply axis in different business models and how they compare to batch processes. Impact of CM on functions in development is discussed and several operational models suitable for originators and other business models are discussed and specific aspects of CM are deduced from CM's technical characteristics. Organizational structures of current operations typically can support CM implementations with just minor refinements if the CM technology is limited to single steps or small sequences (bin-to-bin approach) and if the appropriate technical skill set is available. In such cases, a small, dedicated group focused on CM is recommended. The manufacturing strategy, as centralized versus decentralized in light of CM processes, is discussed and the potential impact of significantly shortened supply lead times on the organization that runs these processes. The ultimate CM implementation may be seen by some as a totally integrated monolithic plant, one that unifies chemistry and pharmaceutical operations into one plant. The organization supporting this approach will have to reflect this change in scope and responsibility. The other extreme, admittedly futuristic at this point, would be a highly decentralized approach with multiple smaller hubs; this would require a new and different organizational structure. This processing approach would open up new opportunities for products that

  4. How development and manufacturing will need to be structured--heads of development/manufacturing. May 20-21, 2014 Continuous Manufacturing Symposium.

    Science.gov (United States)

    Nepveux, Kevin; Sherlock, Jon-Paul; Futran, Mauricio; Thien, Michael; Krumme, Markus

    2015-03-01

    Continuous manufacturing (CM) is a process technology that has been used in the chemical industry for large-scale mass production of chemicals in single-purpose plants with benefit for many years. Recent interest has been raised to expand CM into the low-volume, high-value pharmaceutical business with its unique requirements regarding readiness for human use and the required quality, supply chain, and liability constraints in this business context. Using a fairly abstract set of definitions, this paper derives technical consequences of CM in different scenarios along the development-launch-supply axis in different business models and how they compare to batch processes. Impact of CM on functions in development is discussed and several operational models suitable for originators and other business models are discussed and specific aspects of CM are deduced from CM's technical characteristics. Organizational structures of current operations typically can support CM implementations with just minor refinements if the CM technology is limited to single steps or small sequences (bin-to-bin approach) and if the appropriate technical skill set is available. In such cases, a small, dedicated group focused on CM is recommended. The manufacturing strategy, as centralized versus decentralized in light of CM processes, is discussed and the potential impact of significantly shortened supply lead times on the organization that runs these processes. The ultimate CM implementation may be seen by some as a totally integrated monolithic plant, one that unifies chemistry and pharmaceutical operations into one plant. The organization supporting this approach will have to reflect this change in scope and responsibility. The other extreme, admittedly futuristic at this point, would be a highly decentralized approach with multiple smaller hubs; this would require a new and different organizational structure. This processing approach would open up new opportunities for products that

  5. Regional planning and urban infrastructure development in the ...

    African Journals Online (AJOL)

    Regional planning and urban infrastructure development in the Gongola region, ... PROMOTING ACCESS TO AFRICAN RESEARCH ... In North-eastern Nigeria, the Gongola region has been one of the least developed since independence.

  6. Developing a cyber-physical system for hybrid manufacturing in an internet-of-things context

    NARCIS (Netherlands)

    Grefen, P.W.P.J.; Vanderfeesten, I.T.P.; Boultadakis, G.; Gonzalez Garcia, Christian; Garcia-Diaz, Vicente; Pelayo Garcia-Bustelo, B. Cristina; Cueva Lovelle, Juan Manuel

    2018-01-01

    This chapter describes design and development of the HORSE system for process-oriented hybrid manufacturing that seamlessly integrates human and robotics actors in vertical manufacturing cells that are horizontally coupled in end-to-end manufacturing processes. The HORSE system supports advanced

  7. Source removal strategy development for manufactured gas plant sites

    International Nuclear Information System (INIS)

    Golchin, J.; Nelson, S.

    1994-01-01

    A source removal action plan was developed by Midwest Gas and the Iowa Department of Natural Resources to address the source coal tar contamination within the underground gas holder basin at former Manufactured Gas Plant (MGP) sites. The procedure utilizes a mixture of coal, contaminated soil and coal rat sludge to provide a material that had suitable material handling characteristics for shipment and burning in high efficiency utility boilers. Screening of the mixture was required to remove oversized debris and ferrous metal. The resulting mixture did not exhibit toxic characteristics when tested under the Toxicity Characteristics Leaching Procedure (TCLP). Test results on the coal tar sludges have indicated that the more pure coal tar materials may fail the TCLP test and be classified as a RCRA hazardous waste. The processing procedure was designed to stabilize the coal tar sludges and render those sludges less hazardous and, as a result, able to pass the TCLP test. This procedure was adopted by the Edison Electric Institute to develop a national guidance document for remediation of MGP sites. The EPA Office of Solid Waste and Emergency Response recommended this strategy to the Regional Waste Management Directors as a practical tool for handling wastes that may exhibit the RCRA characteristics

  8. Design and development of progressive tool for manufacturing washer

    Science.gov (United States)

    Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

    2017-07-01

    In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

  9. Component Manufacturing Development for the National Compact Stellarator Experiment (NCSX)

    International Nuclear Information System (INIS)

    Heitzenroeder, P.J.; Brown, T.G.; Chrzanowski, J.H.; Cole, M.J.; Goranson, P.L.; Neilson, G.H.; Nelson, B.E.; Reiersen, W.T.; Sutton, L.L.; Williamson, D.E.; Viola, M.E.

    2004-11-01

    NCSX [National Compact Stellarator Experiment] is the first of a new class of stellarators called compact stellarators which hold the promise of retaining the steady state feature of the stellarator but at a much lower aspect ratio and using a quasi-axisymmetric magnetic field to obtain tokamak-like performance. Although much of NCSX is conventional in design and construction, the vacuum vessel and modular coils provide significant engineering challenges due to their complex shapes, need for high dimensional accuracy, and the high current density required in the modular coils due space constraints. Consequently, a three-phase development program has been undertaken. In the first phase, laboratory/industrial studies were performed during the development of the conceptual design to permit advances in manufacturing technology to be incorporated into NCSX's plans. In the second phase, full-scale prototype modular coil winding forms, compacted cable conductors, and 20 degree sectors of the vacuum vessel were fabricated in industry. In parallel, the NCSX project team undertook RandD studies that focused on the windings. The third (production) phase began in September 2004. First plasma is scheduled for January 2008

  10. Component manufacturing development for the National Compact Stellarator Experiment (NCSX)

    International Nuclear Information System (INIS)

    Heitzenroeder, P.J.; Brown, T.G.; Chrzanowski, J.H.; Neilson, G.H.; Reiersen, W.T.; Sutton, L.L.; Viola, M.E.; Cole, M.J.; Goranson, P.L.; Nelson, B.E.; Williamson, D.E.

    2005-01-01

    NCSX is the first of a new class of stellarators called compact stellarators which hold the promise of retaining the steady state feature of the stellarator but at a much lower aspect ratio and using a quasi-axisymmetric magnetic field to obtain tokamak-like performance. Although much of NCSX is conventional in design and construction, the vacuum vessel and modular coils provide significant engineering challenges due to their complex shapes, need for high dimensional accuracy, and the need for high current density in the modular coils due space constraints. Consequently, a three-phase development program has been undertaken. In the first phase, laboratory / industrial studies were performed during the development of the conceptual design to permit advances in manufacturing technology to be incorporated into NCSX's plans. In the second phase, full-scale prototype modular coil winding forms, compacted cable conductors, and 20-degree sectors of the vacuum vessel were fabricated in industry. In parallel, the NCSX project team undertook R and D studies that focused on the windings. The third (production) phase began in September 2004. First plasma is scheduled for January 2008. (author)

  11. DUPIC nuclear fuel manufacturing and process technology development

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Park, J. J.; Lee, J. W.

    2000-05-01

    In this study, DUPIC fuel fabrication technology and the active fuel laboratory were developed for the study of spent nuclear fuel. A new nuclear fuel using highly radioactive nuclear materials can be studied at the active fuel laboratory. Detailed DUPIC fuel fabrication process flow was developed considering the manufacturing flow, quality control process and material accountability. The equipment layout of about twenty DUPIC equipment at IMEF M6 hot cell was established for the minimization of the contamination during DUPIC processes. The characteristics of the SIMFUEL powder and pellets was studied in terms of milling conditions. The characteristics of DUPIC powder and pellet was studied by using 1 kg of spent PWR fuel at PIEF nr.9405 hot cell. The results were used as reference process conditions for following DUPIC fuel fabrication at IMEF M6. Based on the reference fabrication process conditions, the main DUPIC pellet fabrication campaign has been started at IMEF M6 using 2 kg of spent PWR fuel since 2000 January. As of March 2000, about thirty DUPIC pellets were successfully fabricated

  12. DUPIC nuclear fuel manufacturing and process technology development

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Park, J. J.; Lee, J. W. [and others

    2000-05-01

    In this study, DUPIC fuel fabrication technology and the active fuel laboratory were developed for the study of spent nuclear fuel. A new nuclear fuel using highly radioactive nuclear materials can be studied at the active fuel laboratory. Detailed DUPIC fuel fabrication process flow was developed considering the manufacturing flow, quality control process and material accountability. The equipment layout of about twenty DUPIC equipment at IMEF M6 hot cell was established for the minimization of the contamination during DUPIC processes. The characteristics of the SIMFUEL powder and pellets was studied in terms of milling conditions. The characteristics of DUPIC powder and pellet was studied by using 1 kg of spent PWR fuel at PIEF nr.9405 hot cell. The results were used as reference process conditions for following DUPIC fuel fabrication at IMEF M6. Based on the reference fabrication process conditions, the main DUPIC pellet fabrication campaign has been started at IMEF M6 using 2 kg of spent PWR fuel since 2000 January. As of March 2000, about thirty DUPIC pellets were successfully fabricated.

  13. Land quality, urban development and urban agriculture within the ...

    African Journals Online (AJOL)

    The research indicates that low-density residential development is still the major consumer ..... planning theory as a separate rural feature. ... a strong motivation against the practice. (Lewcock ... can contribute to the local economy and whether ...

  14. Achievement report on developing inverse manufacturing system in fiscal 1998; 1998 nendo inverse manufacturing system no kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Research and development has been performed on a circulating type production system, or an inverse manufacturing system, to minimize the environmental load in the entire life cycle of industrial products from design to manufacturing, maintenance, recovery, and re-utilization. In developing the recycling information system, discussion and extraction were executed on the data to be exchanged between manufacturers and users in the inverse society. A new individual parts history control system was developed. In developing the recycling processing system, a prototype system was evaluated by using hypothetical data, wherein the possibility of improving the recycling processing efficiency and reducing the cost was verified. In addition, trial design was made on a recycling processing plant in consideration of the cost effect to get the future plant image. In fabricating the inverse manufacturing products, a prototype concept model was made for information terminal devices. Development was performed on such elementary technologies as the easy-to-disintegrate structure technology, self-integration connecting structure and environmental hysteresis detection system. (NEDO)

  15. The Development of a Practical Framework for the Implementation of JIT Manufacturing

    OpenAIRE

    Hallihan, A.

    1996-01-01

    This research develops a framework to guide practitioners through the process of implementing Just In Time manufacturing in the commercial aircraft manufacturing industry. The scope of Just In Time manufacturing is determined through an analysis of its evolution and current use. Current approaches to its implementation are reviewed and shortcomings are identified. A requirement to allow practitioners to tailor the approach to the implementation of Just In Time manufacturing, ...

  16. Surrogate Final Technical Report for "Solar: A Photovoltaic Manufacturing Development Facility"

    Energy Technology Data Exchange (ETDEWEB)

    Farrar, Paul [State University of New York Research Foundation, Albany, NY (United States)

    2014-06-27

    The project goal to create a first-of-a-kind crystalline Silicon (c-Si) photovoltaic (PV) Manufacturing & Technology Development Facility (MDF) that will support the growth and maturation of a strong domestic PV manufacturing industry, based on innovative and differentiated technology, by ensuring industry participants can, in a timely and cost-effective manner, access cutting-edge manufacturing equipment and production expertise needed to accelerate the transition of innovative technologies from R&D into manufacturing.

  17. Space Applications in Support of Future Urban Development in Armenia

    Science.gov (United States)

    Alhaddad, Bahaaeddin; Reppucci, Antonio; Moreno, Laura

    2016-08-01

    The fast growing of some cities has produced important changes in the urban sectors not always following sustainability criteria. As results, most urban growth falls outside formal planning controls and many cities suffer poor urban services management, traffic, and congestion, loss of green areas, poor air quality, and noise. The main advantages of satellite-based EO products are to support the decision-making process, and the development and operation of smart services. Satellite-based urban morphology analysis can help to identify the transformation of the urban development and evolution. The pilot presented here is a demonstration in the framework of the collaboration between ESA and ADB, called EOTAP "Earth Observation for a Transforming Asia Pacific". Aim of the pilot is to exploit satellite Earth observation data for sustainable growth and help preparing a series of city development and investment plans.

  18. Develop and Manufacture an Ergonomically Sound Glovebox Glove Report

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Cindy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-10-18

    Ergonomic injury and radiation exposure are two safety concerns for the Plutonium Facility at Los Alamos National Laboratory (LANL). This facility employs the largest number of gloveboxes (GB) at LANL with approximately 6000 gloves installed. The current GB glove design dates back to the 1960’s and is not based on true hand anatomy, revealing several issues: short fingers, inappropriate length from the wrist to finger webbing, nonexistent joint angles and incorrect thumb placement. These design flaws are directly related to elbow (lateral epicondylitis) and thumb (DeQuervain’s tenosynovitis) injuries. The current design also contributes to increased wear on the glove, causing unplanned glove openings (failures) which places workers at risk of exposure. An improved glovebox glove design has three significant benefits: 1) it will reduce the risk of injury, 2) it will improve comfort and productivity, and 3) it will reduce the risk of a glovebox failures. The combination of these three benefits has estimated savings of several million dollars. The new glove design incorporated the varied physical attributes of workers ranging from the 5th percentile female to the 95th percentile male. Anthropometric hand dimensions along with current GB worker dimensions were used to develop the most comprehensive design specifications for the new glove. Collaboration with orthopedic hand surgeons also provided major contributtions to the design. The new glovebox glove was developed and manufactured incorporating over forty dimensions producing the most comprehensive ergonomically sound design. The new design received a LANL patent (patent attorney docket No: LANS 36USD1 “Protective Glove”, one of 20 highest patents awarded by the Richard P. Feynman Center for Innovation. The glove dimensions were inputed into a solid works model which was used to produce molds. The molds were then shipped to a glove manufacturer for production of the new glovebox gloves. The new

  19. The challenge of sustainable mobility in urban planning and development

    DEFF Research Database (Denmark)

    Xue, Jin; Næss, Petter; Yao, Yinmei

    2011-01-01

    The theme of this article is how the challenge of sustainable mobility has been dealt with in urban planning and urban development in the metropolitan areas of Copenhagen (Denmark) and Hangzhou (China). The two metropolises have followed different trajectories in their land use and transport...

  20. Implications of Urban Development-Induced Resettlement on Poor ...

    African Journals Online (AJOL)

    They are moved away from their areas of work, their social networks .... for Urban Development and Urban Good Governance (FDRE 2007) discusses the three pillars ... about their experiences of past practices of resettlement. ..... women and single-headed families, empowering such families to enable them to engage in ...

  1. EUV source development for high-volume chip manufacturing tools

    Science.gov (United States)

    Stamm, Uwe; Yoshioka, Masaki; Kleinschmidt, Jürgen; Ziener, Christian; Schriever, Guido; Schürmann, Max C.; Hergenhan, Guido; Borisov, Vladimir M.

    2007-03-01

    Xenon-fueled gas discharge produced plasma (DPP) sources were integrated into Micro Exposure Tools already in 2004. Operation of these tools in a research environment gave early learning for the development of EUV sources for Alpha and Beta-Tools. Further experiments with these sources were performed for basic understanding on EUV source technology and limits, especially the achievable power and reliability. The intermediate focus power of Alpha-Tool sources under development is measured to values above 10 W. Debris mitigation schemes were successfully integrated into the sources leading to reasonable collector mirror lifetimes with target of 10 billion pulses due to the effective debris flux reduction. Source collector mirrors, which withstand the radiation and temperature load of Xenon-fueled sources, have been developed in cooperation with MediaLario Technologies to support intermediate focus power well above 10 W. To fulfill the requirements for High Volume chip Manufacturing (HVM) applications, a new concept for HVM EUV sources with higher efficiency has been developed at XTREME technologies. The discharge produced plasma (DPP) source concept combines the use of rotating disk electrodes (RDE) with laser exited droplet targets. The source concept is called laser assisted droplet RDE source. The fuel of these sources has been selected to be Tin. The conversion efficiency achieved with the laser assisted droplet RDE source is 2-3x higher compared to Xenon. Very high pulse energies well above 200 mJ / 2π sr have been measured with first prototypes of the laser assisted droplet RDE source. If it is possible to maintain these high pulse energies at higher repetition rates a 10 kHz EUV source could deliver 2000 W / 2π sr. According to the first experimental data the new concept is expected to be scalable to an intermediate focus power on the 300 W level.

  2. Urban forest biomass estimates: is it important to use allometric relationships developed specifically for urban trees? 

    Science.gov (United States)

    M.R. McHale; I.C. Burke; M.A. Lefsky; P.J. Peper; E.G. McPherson

    2009-01-01

    Many studies have analyzed the benefits, costs, and carbon storage capacity associated with urban trees. These studies have been limited by a lack of research on urban tree biomass, such that estimates of carbon storage in urban systems have relied upon allometric relationships developed in traditional forests. As urbanization increases globally, it is becoming...

  3. Industrial Energy Use and Interventions in Urban Form : Heavy Manufacturing versus New Service and Creative Industries

    NARCIS (Netherlands)

    Romein, A.

    2016-01-01

    Now that it becomes obvious that disregarding the seriousness of climate change and the exhaustibility of fossil fuels would have severe and unpredictable impacts, improvement of the efficiency of urban energy consumption is of utmost importance. Hence, a rather diverse spectrum of policies to

  4. Developing a Continuous Bioprocessing Approach to Stromal Cell Manufacture.

    Science.gov (United States)

    Miotto, Martina; Gouveia, Ricardo; Abidin, Fadhilah Zainal; Figueiredo, Francisco; Connon, Che J

    2017-11-29

    To this day, the concept of continuous bioprocessing has been applied mostly to the manufacture of molecular biologics such as proteins, growth factors, and secondary metabolites with biopharmaceutical uses. The present work now sets to explore the potential application of continuous bioprocess methods to source large numbers of human adherent cells with potential therapeutic value. To this purpose, we developed a smart multifunctional surface coating capable of controlling the attachment, proliferation, and subsequent self-detachment of human corneal stromal cells. This system allowed the maintenance of cell cultures under steady-state growth conditions, where self-detaching cells were continuously replenished by the proliferation of those remaining attached. This facilitated a closed, continuous bioprocessing platform with recovery of approximately 1% of the total adherent cells per hour, a yield rate that was maintained for 1 month. Moreover, both attached and self-detached cells were shown to retain their original phenotype. Together, these results represent the proof-of-concept for a new high-throughput, high-standard, and low-cost biomanufacturing strategy with multiple potentials and important downstream applications.

  5. Cleaning Process Development for Metallic Additively Manufactured Parts

    Science.gov (United States)

    Tramel, Terri L.; Welker, Roger; Lowery, Niki; Mitchell, Mark

    2014-01-01

    Additive Manufacturing of metallic components for aerospace applications offers many advantages over traditional manufacturing techniques. As a new technology, many aspects of its widespread utilization remain open to investigation. Among these are the cleaning processes that can be used for post finishing of parts and measurements to verify effectiveness of the cleaning processes. Many cleaning and drying processes and measurement methods that have been used for parts manufactured using conventional techniques are candidates that may be considered for cleaning and verification of additively manufactured parts. Among these are vapor degreasing, ultrasonic immersion and spray cleaning, followed by hot air drying, vacuum baking and solvent displacement drying. Differences in porosity, density, and surface finish of additively manufactured versus conventionally manufactured parts may introduce new considerations in the selection of cleaning and drying processes or the method used to verify their effectiveness. This presentation will review the relative strengths and weaknesses of different candidate cleaning and drying processes as they may apply to additively manufactured metal parts for aerospace applications. An ultrasonic cleaning technique for exploring the cleanability of parts will be presented along with an example using additively manufactured Inconel 718 test specimens to illustrate its use. The data analysis shows that this ultrasonic cleaning approach results in a well-behaved ultrasonic cleaning/extraction behavior. That is, it does not show signs of accelerated cavitation erosion of the base material, which was later confirmed by neutron imaging. In addition, the analysis indicated that complete cleaning would be achieved by ultrasonic immersion cleaning at approximately 5 minutes, which was verified by subsequent cleaning of additional parts.

  6. Development of Standard Approach for Sickle Blade Manufacturing

    OpenAIRE

    Noordin, M. N. A; Hudzari, R. M; Azuan, H. N; Zainon, M. S; Mohamed, S. B; Wafi, S. A

    2016-01-01

    The sickle blade used in the motorised palm cutter known as “CANTAS” provides fast, easy and safe pruning and harvesting for those hard to reach applications. Jariz Technologies Company is experiencing problem in the consistency of sickle blade which was supplied by various blade manufacturers. Identifying the proper blade material with a certain hardness value would produce a consistent as well as long lasting sickle blade. A Standard Operating Procedure (SOP) in the manufacturing of the sic...

  7. Capitalism and Culture in Ibadan Urban Development.

    Science.gov (United States)

    Aronson, Dan R.

    1978-01-01

    An extended case analysis of a 1973 single land sale in the Yoruba city of Ibadan illustrates the role of Yoruba cultural patterns in Nigerian capitalist growth. This analysis also provides insight into the nature of the social relationships being established in the urbanization of Ibadan. (EB)

  8. cloudland, stronzoland, brisbane: urban development and ethnic ...

    African Journals Online (AJOL)

    User

    'overgrown country town', is less publicised and less romanticised and thus less familiar to the ..... society) but he cannot prevent its slow disintegration through class mobility and ... fast-paced world of sleeping during the day and partying through the night, of an urban .... Nedlands: The University of Western. Australia: 71-84.

  9. Urbanization and its Political Challenges in Developing Countries

    Directory of Open Access Journals (Sweden)

    Kemal ÖZDEN

    2012-11-01

    Full Text Available Developing countries in the twenty-first century is experiencing rapid urbanization with a high concentration of people in the urban areas while the population of people in the rural areas is decreasing due to the rise in rural-urban push which has adverse consequences on the economic and political development of developing countries, in particular African cities. Therefore, this study seeks to analyze the trends and nature of urbanization in Africa from the pre-colonial era to the contemporary period of globalization in order to ascertain the implications of rapid urbanization on the processes of democratic transitions, on the vagaries of food sufficiency and crisis as well as its multiplier effects on the escalating rate of poverty and insurgency in the cities. These problems stem from the lack of good governance, high rate of corruption and the misappropriation of state resources through diverse economic liberalizing reforms and development strategies. Thus, this study affirms that urbanization is a process that requires objective management and institutional role differentiations and performance to create the organizational synergy, moderation and frugality necessary for the equitable distribution of the common wealth for the greatest good of all peoples not only in the urban areas but also in the rural areas which invariably will bring about political and economic development in African cities, and reduce the high incidences of poverty, insurgency and food crisis.

  10. Development of the computer-aided process planning (CAPP system for polymer injection molds manufacturing

    Directory of Open Access Journals (Sweden)

    J. Tepić

    2011-10-01

    Full Text Available Beginning of production and selling of polymer products largely depends on mold manufacturing. The costs of mold manufacturing have significant share in the final price of a product. The best way to improve and rationalize polymer injection molds production process is by doing mold design automation and manufacturing process planning automation. This paper reviews development of a dedicated process planning system for manufacturing of the mold for injection molding, which integrates computer-aided design (CAD, computer-aided process planning (CAPP and computer-aided manufacturing (CAM technologies.

  11. Intelligent Processing Equipment Developments Within the Navy's Manufacturing Technology Centers of Excellence

    Science.gov (United States)

    Nanzetta, Philip

    1992-01-01

    The U.S. Navy has had an active Manufacturing Technology (MANTECH) Program aimed at developing advanced production processes and equipment since the late-1960's. During the past decade, however, the resources of the MANTECH program were concentrated in Centers of Excellence. Today, the Navy sponsors four manufacturing technology Centers of Excellence: the Automated Manufacturing Research Facility (AMRF); the Electronics Manufacturing Productivity Facility (EMPF); the National Center for Excellence in Metalworking Technology (NCEMT); and the Center of Excellence for Composites Manufacturing Technology (CECMT). This paper briefly describes each of the centers and summarizes typical Intelligent Equipment Processing (IEP) projects that were undertaken.

  12. Development of a strategy for decontamination of an urban area

    International Nuclear Information System (INIS)

    Roed, J.; Andersson, K.G.

    2000-01-01

    The Chernobyl accident in 1986 lead to high level contamination in urban areas in different parts of Europe and showed the importance of preparedness in the optimisation of any mitigatory interference. To meet this demand, a method for development of a decontamination strategy for urban areas has been developed based on measurements of radionuclide distribution in the urban environment after the Chernobyl accident, calculations of dose and experimentally obtained data on effectiveness and cost of practicable clean-up procedures. The approach highlights where decontamination would be of greatest benefit in terms of dose reduction and cost. (author)

  13. The challenges of rapid urbanization on sustainable development of ...

    African Journals Online (AJOL)

    The challenges of rapid urbanization on sustainable development of Nyanya, Federal Capital ... PROMOTING ACCESS TO AFRICAN RESEARCH ... unaffordable health care facilities, poor environmental health and traffic congestion on the ...

  14. Integrated policy analysis of sustainable urban and transportation development

    NARCIS (Netherlands)

    Zhang, J.; Feng, T.; Fujiwara, A.; Fujiwara, A.; Zhang, Junyi

    2013-01-01

    Sustainable urban and transportation development needs to balance economic sustainability, environmental sustainability, and social equity. This study conducts integrated policy analyses by explicitly incorporating these sustainability goals and optimizing the performance of transportation networks.

  15. pupil initiatives in urban nature trail development: pmb moss

    African Journals Online (AJOL)

    .ritzburg is provided. Negotiations and procedures initiated by standard 9 pupils in stimulating authorities and the public to recog~ nise the need for urban trail development and metropolitan open space. (MOSS) are outlined. long-tenn ...

  16. The General Atomics low speed urban Maglev technology development program

    Science.gov (United States)

    2003-01-01

    The overall objective of this program is to develop magnetic levitation technology that is a cost effective, reliable, : and environmentally friendly option for urban mass transportation in the United States. Maglev is a revolutionary : approach in w...

  17. Design as a way to develop a relevant urban environment ...

    African Journals Online (AJOL)

    Design as a way to develop a relevant urban environment. ... Futuristic ideas of young designers can become the first stage in solving these challenging tasks. ... the problems of a modern city: from space organization to leisure organization.

  18. Developing knowledge cities : Aligning urban, corporate and university strategies

    NARCIS (Netherlands)

    Den Heijer, A.C.; De Vries, J.C.; De Jonge, H.

    2011-01-01

    The successful development of knowledge cities increasingly depends on collaboration between urban and regional authorities, knowledge institutions and businesses. Policy makers and business strategists do acknowledge the interrelated objectives of these actors in the knowledge economy and their

  19. Development of novel IVD assays: a manufacturer's perspective.

    Science.gov (United States)

    Metcalfe, Thomas A

    2010-01-01

    IVD manufacturers are heavily reliant on novel IVD assays to fuel their growth and drive innovation within the industry. They represent a key part of the IVD industry's value proposition to customers and the healthcare industry in general, driving product differentiation, helping to create demand for new systems and generating incremental revenue. However, the discovery of novel biomarkers and their qualification for a specific clinical purpose is a high risk undertaking and the large, risky investments associated with doing this on a large scale are incompatible with IVD manufacturer's business models. This article describes the sources of novel IVD assays, the processes for discovering and qualifying novel assays and the reliance of IVD manufacturers on collaborations and in-licensing to source new IVD assays for their platforms.

  20. A theoretical framework on CSR and urban development

    OpenAIRE

    Tsavdaridou, Maria; Metaxas, Theodore

    2015-01-01

    The role of enterprises in society is without doubt controversial nowadays due to the economic crisis. Although enterprises offer infrastructures, jobs, innovative solutions to local communities their primary goal is profit in order to be competitive and sustainable. This article examines the implementation of urban development projects under the CSR strategy and provides case studies of European enterprises that offered successful urban development projects in their local communities. There...

  1. The interaction between land subsidence and urban development in China

    Directory of Open Access Journals (Sweden)

    Y. Yang

    2015-11-01

    Full Text Available The Yangtze River Delta and North China Plain are experiencing serious land subsidence development and are also the areas that have undergone the fastest urbanization. Rapid urban development inevitably requires more water resources. However, China is a country with small per capita water resources, nonuniform distribution of water resources, and over-exploitation of groundwater – all of which are critical factors contributing to the potential for a land subsidence disaster. In addition, land subsidence has brought about elevation loss, damaged buildings, decreased safety of rail transit projects, lowered land value, and other huge economic losses and potential safety hazards in China. In this paper, Beijing, a typical northern Chinese city deficient in water, is taken as an example to explore (a the problems of urban development, utilization of water resources, and land subsidence development; (b the harm and influence of land subsidence hazards on urban construction; and (c the relationship between urban development and land subsidence. Based on the results, the author has predicted the trend of urban development and land subsidence in Beijing and puts forward her viewpoints and suggestions.

  2. Using lean manufacturing principles to evaluate wait times for HIV-positive patients in an urban clinic in Kenya.

    Science.gov (United States)

    Monroe-Wise, Aliza; Reisner, Elizabeth; Sherr, Kenneth; Ojakaa, David; Mbau, Lilian; Kisia, Paul; Muhula, Samuel; Farquhar, Carey

    2017-12-01

    As human immunodeficiency virus (HIV) treatment programs expand in Africa, delivery systems must be strengthened to support patient retention. Clinic characteristics may affect retention, but a relationship between clinic flow and attrition is not established. This project characterized HIV patient experience and flow in an urban Kenyan clinic to understand how these may affect retention. We used Toyota's lean manufacturing principles to guide data collection and analysis. Clinic flow was evaluated using value stream mapping and time and motion techniques. Clinic register data were analyzed. Two focus group discussions were held to characterize HIV patient experience. Results were shared with clinic staff. Wait times in the clinic were highly variable. We identified four main barriers to patient flow: inconsistent patient arrivals, inconsistent staffing, filing system defects, and serving patients out of order. Focus group participants explained how clinic operations affected their ability to engage in care. Clinic staff were eager to discuss the problems identified and identified numerous low-cost potential solutions. Lean manufacturing methodologies can guide efficiency interventions in low-resource healthcare settings. Using lean techniques, we identified bottlenecks to clinic flow and low-cost solutions to improve wait times. Improving flow may result in increased patient satisfaction and retention.

  3. Sustainable urban development and the multi-level transition perspective

    DEFF Research Database (Denmark)

    Næss, Petter; Vogel, Nina

    2012-01-01

    This article discusses some challenges and possible adaptations of transition theory as a framework for analyzing the prospects for environmentally more sustainable development of urban land use and transport infrastructure. Rather than depending first and foremost on niche innovations......, a transition toward sustainable urban development is a matter of changing the composition of existing multisegmented land use and transportation regimes. Those well-experienced forms of built environment and transport infrastructure that are in line with sustainability objectives should be strengthened while...... those that are not should be actively constrained and reduced. Urban development in a Danish provincial city is used as a case to illustrate some of the points made in the theoretical part of the article. Due to the wide gap between present conditions and those required to realize a sustainable urban...

  4. Managing organizational DSS development in small manufacturing enterprise

    NARCIS (Netherlands)

    M.M.C. Tam (M. M C); W.W.C. Chung (W. W C); S. Yung (Sun); A.K. David (A.); K.B.C. Saxena (Kul Bhushan)

    1994-01-01

    textabstractA number of Hong Kong manufacturing companies have moved their production to the People's Republic of China while retaining their supporting functions (such as marketing, distribution, etc.) in Hong Kong. As a consequence, their mode of operation has become more complex and demands

  5. U.S. Offshore Wind Manufacturing and Supply Chain Development

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Bruce [Navigant Consulting, Inc., Burlington, MA (United States)

    2013-02-22

    This report seeks to provide an organized, analytical approach to identifying and bounding uncertainties around offshore wind manufacturing and supply chain capabilities; projecting potential component-level supply chain needs under three demand scenarios; and identifying key supply chain challenges and opportunities facing the future U.S. market and current suppliers of the nation’s landbased wind market.

  6. Strategies for managing the effects of urban development on streams

    Science.gov (United States)

    Cappiella, Karen; Stack, William P.; Fraley-McNeal, Lisa; Lane, Cecilia; McMahon, Gerard

    2012-01-01

    Urban development remains an important agent of environmental change in the United States. The U.S. population grew by 17 percent from 1982 to 1997, while urbanized land area grew by 47 percent, suggesting that urban land consumption far outpaced population growth (Fulton and others, 2001; Sierra Club, 2003; American Farmland Trust, 2009). Eighty percent of Americans now live in metropolitan areas. Each American effectively occupies about 20 percent more developed land (for housing, schools, shopping, roads, and other related services) than 20 years ago (Markham and Steinzor, 2006). Passel and Cohn (2008) predict a dramatic 48 percent increase in the population of the United States from 2005 to 2050. The advantages and challenges of living in these developed areas—convenience, congestion, employment, pollution—are part of the day-to-day realities of most Americans. Nowhere are the environmental changes associated with urban development more evident than in urban streams. The U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program investigation of the effects of urban development on stream ecosystems (EUSE) during 1999–2004 provides the most spatially comprehensive analysis of stream impacts of urban development that has been completed in the United States. A nationally consistent study design was used in nine metropolitan areas of the United States—Portland, Oregon; Salt Lake City, Utah; Birmingham, Alabama; Atlanta, Georgia; Raleigh, North Carolina; Boston, Massachusetts; Denver, Colorado; Dallas, Texas; and Milwaukee, Wisconsin. A summary report published as part of the EUSE study describes several of these impacts on urban streams (Coles and others, 2012).

  7. A method to study the management of urban development projects

    NARCIS (Netherlands)

    Heurkens, E.

    2011-01-01

    The management of urban development projects in the Netherlands has changed significantly in recent years. These projects have become mainly ‘led’ by developers as they manage the entire life cycle of development projects, while public actors mainly facilitate development projects. This changes the

  8. Governance in urban development crisis situations

    Directory of Open Access Journals (Sweden)

    Jörg Rober

    2008-01-01

    Full Text Available Urban shrinking processes are increasingly recognized as a phenomenon for research in urban politics, encompassing entire cities or parts of it as well as metropolitan areas that are experiencing a fundamental decline in both their economic and social bases.Cities are facing complex social problems like aging processes within the resident population and simultaneously running shrinking processes. Observable side effects of these transformation processes are higher vacancy rates and under-utilization of infrastructure facilities. Therefore cities are no longer able to cope alone with this growing complexity, hence a demand for cooperation evolves. The ongoing reforms of internal structure of local government connected with the devolution of resources and competences, as well as the changing external relationships between the business community, local public bodies, individual bureaucrats and local politicians, increase institutional fragmentation. Thus internal and external reform processes generate an extended network of policy actors involved in local decision making. Schools of thought in urban politics accentuate the changing role of local governments in decision making processes. Regime theory, corporatism, regulation theory or civic governance concepts differ in their emphasis on the importance of specific actors participating in local decision making. The paper reviews the competing theoretical assumptions for the importance of specific actors in local decision making. This addresses the question to what extent specific governance modes adopted in reaction to shrinking processes are an expression of a changing relationship between local governments and civil society or business actors in an international comparative context. Is there a trend to more convergence with respect to the adopted governance modes?

  9. Developing Efficient Urban Electrical Systems Using Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Gahagan, Michael

    2010-09-15

    Electric vehicles and battery storage will complicate utility operations and strain existing networks. One possible solution is the implementation of 'microgrids' autonomous electricity environments that operate within a larger electric utility grid and their 'controllers' Microgrids direct locally generated power to local demand, coordinate with centralized utility networks to meet additional demand, and pass excess supply to neighboring microgrids. This paper explains the evolution of microgrids. It details their design and operation. It also reviews their many benefits within urban settings, including minimizing customer costs while maximizing use of local generation from clean, renewable resources.

  10. Ensuring Sustainable Development through Urban Planning in Pakistan

    Directory of Open Access Journals (Sweden)

    Mohammad Qasim

    2013-04-01

    Full Text Available Urban planning includes land use management and environmental change. It makes arrangement for community facilities and services. Since, sustainable development has been included as a vital end product of all planning goals it also provides for balanced use of land, housing and transportation and better quality of life. Present urban planning in Pakistan is not ensuring sustainable development in Pakistan. This is tested through the case study of master planning in Rawalpindi and its implementation through housing schemes in Rawalpindi, Pakistan. Large portions of provisions of master plans are not implemented. This paper explains how the urban planning will be made enabled to ensure sustainable development in Pakistan. Six numbers of housing schemes and two squatter settlements have been surveyed through questionnaires, secondary data, the opinions of the experts from related fields and site observations. Amenities and social services at far distance, very less green area, Less quantity and bad quality of water, absence of comprehensive solid waste management and sewage disposal system and nontreatment of solid waste, effluent and sewage, prevalent unhygienic conditions and air and water pollution are the existing factors effecting the sustainability. There is a need to revisit the urban planning and a comprehensive Urban and Environment Planning Law at national level and at provincial level is recommended to enable the urban planning to ensure the sustainable development in Pakistan

  11. Ensuring sustainable development through urban planing in pakistan

    International Nuclear Information System (INIS)

    Qasim, M.; Zaidi, S.S.U.

    2013-01-01

    Urban planning includes land use management and environmental change. It makes arrangement for community facilities and services. Since, sustainable development has been included as a vital end product of all planning goals it also provides for balanced use of land, housing and transportation and better quality of life. Present urban planning in Pakistan is not ensuring sustainable development in Pakistan. This is tested through the case study of master planning in Rawalpindi and its implementation through housing schemes in Rawalpindi, Pakistan. Large portions of provisions of master plans are not implemented. This paper explains how the urban planning will be made enabled to ensure sustainable development in Pakistan. Six numbers of housing schemes and two squatter settlements have been surveyed through questionnaires, secondary data, the opinions of the experts from related fields and site observations. Amenities and social services at far distance, very less green area, Less quantity and bad quality of water, absence of comprehensive solid waste management and sewage disposal system and non- treatment of solid waste, effluent and sewage, prevalent unhygienic conditions and air and water pollution are the existing factors effecting the sustainability. There is a need to revisit the urban planning and a comprehensive Urban and Environment Planning Law at national level and at provincial level is recommended to enable the urban planning to ensure the sustainable development in Pakistan. (author)

  12. Urban development results in stressors that degrade stream ecosystems

    Science.gov (United States)

    Bell, Amanda H.; Coles, James F.; McMahon, Gerard; Woodside, Michael D.

    2012-01-01

    In 2003, eighty-three percent of Americans lived in metropolitan areas, and considerable population increases are predicted within the next 50 years. Nowhere are the environmental changes associated with urban development more evident than in urban streams. Contaminants, habitat destruction, and increasing streamflow flashiness resulting from urban development have been associated with the disruption of biological communities, particularly the loss of sensitive aquatic biota. Every stream is connected downstream to other water bodies, and inputs of contaminants and (or) sediments to streams can cause degradation downstream with adverse effects on biological communities and on economically valuable resources, such as fisheries and tourism. Understanding how algal, invertebrate, and fish communities respond to physical and chemical stressors associated with urban development can provide important clues on how multiple stressors may be managed to protect stream health as a watershed becomes increasingly urbanized. This fact sheet highlights selected findings of a comprehensive assessment by the National Water-Quality Assessment Program of the U.S. Geological Survey (USGS) of the effects of urban development on stream ecosystems in nine metropolitan study areas.

  13. The Making of Sustainable Urban Development: A Synthesis Framework

    Directory of Open Access Journals (Sweden)

    Hui-Ting Tang

    2016-05-01

    Full Text Available In a time of rapid climate change and environmental degradation, planning and building an ecologically sustainable environment have become imperative. In particular, urban settlements, as a densely populated built environment, are the center of attention. This study aims to build a clear and concise synthesis of sustainable urban development not only to serve as an essential reference for decision and policy makers, but also encourage more strategically organized sustainability efforts. The extensive similarities between environmental planning and a policy-making/decision-making/problem-solving process will be carefully examined to confirm the fundamental need to build a synthesis. Major global urban sustainability rankings/standards will be presented, discussed, and integrated to produce a holistic synthesis with ten themes and three dimensions. The study will assemble disparate information across time, space, and disciplines to guide and to facilitate sustainable urban development in which both environmental concerns and human wellbeing are addressed.

  14. Development and Manufacture of Cost-Effective Composite Drill Pipe

    Energy Technology Data Exchange (ETDEWEB)

    James C. Leslie

    2008-12-31

    Advanced Composite Products and Technology, Inc. (ACPT) has developed composite drill pipe (CDP) that matches the structural and strength properties of steel drill pipe, but weighs less than 50 percent of its steel counterpart. Funding for the multiyear research and development of CDP was provided by the U.S. Department of Energy Office of Fossil Energy through the Natural Gas and Oil Projects Management Division at the National Energy Technology Laboratory (NETL). Composite materials made of carbon fibers and epoxy resin offer mechanical properties comparable to steel at less than half the weight. Composite drill pipe consists of a composite material tube with standard drill pipe steel box and pin connections. Unlike metal drill pipe, composite drill pipe can be easily designed, ordered, and produced to meet specific requirements for specific applications. Because it uses standard joint connectors, CDP can be used in lieu of any part of or for the entire steel drill pipe section. For low curvature extended reach, deep directional drilling, or ultra deep onshore or offshore drilling, the increased strength to weight ratio of CDP will increase the limits in all three drilling applications. Deceased weight will reduce hauling costs and increase the amount of drill pipe allowed on offshore platforms. In extreme extended reach areas and high-angle directional drilling, drilling limits are associated with both high angle (fatigue) and frictional effects resulting from the combination of high angle curvature and/or total weight. The radius of curvature for a hole as small as 40 feet (12.2 meters) or a build rate of 140 degrees per 100 feet is within the fatigue limits of specially designed CDP. Other properties that can be incorporated into the design and manufacture of composite drill pipe and make it attractive for specific applications are corrosion resistance, non-magnetic intervals, and abrasion resistance coatings. Since CDP has little or no electromagnetic force

  15. V1.6 Development of Advanced Manufacturing Technologies for Low Cost Hydrogen Storage Vessels

    Energy Technology Data Exchange (ETDEWEB)

    Leavitt, Mark; Lam, Patrick; Nelson, Karl M.; johnson, Brice A.; Johnson, Kenneth I.; Alvine, Kyle J.; Ruiz, Antonio; Adams, Jesse

    2012-10-01

    The goal of this project is to develop an innovative manufacturing process for Type IV high-pressure hydrogen storage vessels, with the intent to significantly lower manufacturing costs. Part of the development is to integrate the features of high precision AFP and commercial FW. Evaluation of an alternative fiber to replace a portion of the baseline fiber will help to reduce costs further.

  16. Abu Dhabi’s New Urban Islands and Shorefront Development

    Directory of Open Access Journals (Sweden)

    El Amrousi Mohamed

    2017-01-01

    Full Text Available Abu Dhabi is in the process of urbanizing a group of Islands that surround its northern and eastern coastlines. Al-Lulu, Al-Saadiyat, Al- Maryah, Al-Reem and Yas Islands are all new urban enclaves that were desert islands and marshlands yet, have been developed over the past decade to urban islands that include epic and entertainment centres such as the Abu Dhabi Louvre, Guggenheim Museum, Ferrari World, NYU Abu Dhabi, the Paris Sorbonne Abu Dhabi in addition to iconic and exclusive waterfront residential units. These new islands re-brand the image of the main archipelago of Abu Dhabi that for decades retained a grid street pattern and pragmatic concrete blocks created in the late 1970s. The new urban islands transform Abu Dhabi’s image into a multinational modern Arab city seeking to become part of the global city network. Abu Dhabi’s new urban islands also act as breakwaters that protect the main archipelago’s coastline from erosion resulting from tidal change, because they are designed to include concrete and stone breakwater barriers. This paper represents a cross-disciplinary research between Civil Engineering and Architecture Departments in an attempt to explore the emerging infrastructure and urban expansion of Abu Dhabi from a multi-disciplinary perspective. We also highlight through simulating the effect of breakwaters on wave heights two scenarios for Al-Lulu Island the importance of these new barrier Islands on the urban expansion of Abu Dhabi.

  17. Manufacturing technology development for vacuum vessel and plasma facing components

    International Nuclear Information System (INIS)

    Laitinen, Arttu; Liimatainen, Jari; Hallila, Pentti

    2005-01-01

    Vacuum vessel and plasma facing components of the ITER construction including shield modules and primary first wall panels have great impact on the production costs and reliability of the installation. From the manufacturing technology point of view, accuracy of shape, properties of the various austenitic stainless steel/austenitic stainless steel interfaces or CuCrZr/austenitic stainless steel interfaces as well as those of the base materials are crucial for technical reliability of the construction. The current approach in plasma facing components has been utilisation of solid-HIP technology and solid-powder-HIP technology. Due to the large size of especially shield modules shape, control of the internal cavities and cooling channels is extremely demanding. This requires strict control of the raw materials and manufacturing parameters

  18. Latest developments in innovative manufacturing to combine nanotechnology with healthcare

    OpenAIRE

    Parhizkar, M.; Mahalingam, S.; Homer-Vanniasinkam, S.; Edirisinghe, M.

    2017-01-01

    Nanotechnology has become increasingly important in advancing the frontiers of many key areas of healthcare, for example, drug delivery and tissue engineering. To fully harness the many benefits of nanotechnology in healthcare, innovative manufacturing is necessary to mass produce nanoparticles and nanofibers, the two major types of nanofeatures currently sought after and of immense utilitarian value in healthcare. For example, nanoparticles are a key drug delivery enabler, the structural and...

  19. Sustainable Urban Transport in the Developing World: Beyond Megacities

    Directory of Open Access Journals (Sweden)

    Dorina Pojani

    2015-06-01

    Full Text Available Megacities have frequently received a disproportionate amount of attention over other sizes of cities in recent discourse on urban sustainability. In this article, the authors argue that a focus on smaller and medium-sized cities is crucial to achieving substantial progress towards more sustainable urban development, not only because they are home to at least a quarter of the world’s population but because they also offer great potential for sustainable transformations. In principle, their size allows for flexibility in terms of urban expansion, adoption of “green” travel modes, and environmental protection. At the same time, smaller and medium-sized cities often have fewer resources to implement new transport measures and can be more vulnerable to fluctuations in the world economy. This article critically reviews the potential role and impact of nine commonly considered options for sustainable urban transport in cities in developing countries: (1 road infrastructure; (2 rail-based public transport; (3 road-based public transport; (4 support for non-motorized travel modes; (5 technological solutions; (6 awareness-raising campaigns; (7 pricing mechanisms; (8 vehicle access restrictions; and (9 control of land-uses. Drawing on international research and examples of policies to reduce the environmental impacts of transport in urban areas, this article identifies some key lessons for sustainable urban transport in smaller and medium-sized cities in developing countries. These lessons are certainly not always identical to those for megacities in the global south.

  20. A successful local economic development-urban renewal initiative ...

    African Journals Online (AJOL)

    Despite the urgent need for local economic development in South Africa, Local Economic Development (LED) as area of professional endeavour/activity has largely failed to live up to this need. In this article, an alternative approach to local economic development, which involved a 'bottom-up' approach to urban renewal is ...

  1. Urban Big Data and Sustainable Development Goals: Challenges and Opportunities

    Directory of Open Access Journals (Sweden)

    Ali Kharrazi

    2016-12-01

    Full Text Available Cities are perhaps one of the most challenging and yet enabling arenas for sustainable development goals. The Sustainable Development Goals (SDGs emphasize the need to monitor each goal through objective targets and indicators based on common denominators in the ability of countries to collect and maintain relevant standardized data. While this approach is aimed at harmonizing the SDGs at the national level, it presents unique challenges and opportunities for the development of innovative urban-level metrics through big data innovations. In this article, we make the case for advancing more innovative targets and indicators relevant to the SDGs through the emergence of urban big data. We believe that urban policy-makers are faced with unique opportunities to develop, experiment, and advance big data practices relevant to sustainable development. This can be achieved by situating the application of big data innovations through developing mayoral institutions for the governance of urban big data, advancing the culture and common skill sets for applying urban big data, and investing in specialized research and education programs.

  2. Spatiotemporal Patterns of Urbanization in a Developed Region of Eastern Coastal China

    Directory of Open Access Journals (Sweden)

    Jiadan Li

    2014-06-01

    Full Text Available This study presents a practical methodology to monitor the spatiotemporal characteristics of urban expansion in response to rapid urbanization at the provincial scale by integrating remote sensing, urban built-up area boundaries, spatial metrics and spatial regression. Sixty-seven cities were investigated to examine the differences of urbanization intensity, urbanization patterns and urban land use efficiency in conjunction with the identification of socio-economic indicators and planning strategies. Planning proposals to allocate the urbanization intensity among different-sized cities by considering sustainable urban development were also explored. The results showed that the urban area of Zhejiang Province expanded from 31,380 ha in 1980 to 415,184 ha in 2010, indicating that the area of the urban region expanded to more than 13-times the initial urban area. The urban built-up area boundaries became more complex and irregular in shape as the urban area expanded throughout the entire study period. Rapid urban population growth and economic development were identified as significant in stimulating the urban expansion process. However, different-sized cities exhibited marked differences in urban development. Small cities experienced the rapidest urbanization before 2000. Large cities, which are estimated to have the highest urban land use efficiency, had the most dramatic sprawl in urban area at the beginning of the 21st century. Promoting the development of large cities to mega-cities is recommended in Zhejiang Province to ensure sustainable urban development with consideration of land resource preservation.

  3. URBAN SPRAWL AND SUSTAINABLE CITY DEVELOPMENT IN NIGERIA

    Directory of Open Access Journals (Sweden)

    Rosemary Nnaemeka-Okeke

    2016-04-01

    Full Text Available Urban environmental problems are of different dimensions and are mostly due to geologic, climatic and cultural factors. However, the cultural factors seems to be more pronounced in the Nigerian context because most of the identified urban environmental issues are so much associated with the way of life of the people, either as reactions to urbanization or their spatial heritage. Their effects are far reaching on efforts to attain sustainable development in the country. Since no section of the country’s urban environment is immune to environmental effects, there is urgent need to seek workable solutions by the application of planning, economic, legal, institutional and educational tools as have been suggested here.

  4. 3D Machine Vision and Additive Manufacturing: Concurrent Product and Process Development

    International Nuclear Information System (INIS)

    Ilyas, Ismet P

    2013-01-01

    The manufacturing environment rapidly changes in turbulence fashion. Digital manufacturing (DM) plays a significant role and one of the key strategies in setting up vision and strategic planning toward the knowledge based manufacturing. An approach of combining 3D machine vision (3D-MV) and an Additive Manufacturing (AM) may finally be finding its niche in manufacturing. This paper briefly overviews the integration of the 3D machine vision and AM in concurrent product and process development, the challenges and opportunities, the implementation of the 3D-MV and AM at POLMAN Bandung in accelerating product design and process development, and discusses a direct deployment of this approach on a real case from our industrial partners that have placed this as one of the very important and strategic approach in research as well as product/prototype development. The strategic aspects and needs of this combination approach in research, design and development are main concerns of the presentation.

  5. Quantitative assessment of urban transport development – a spatial approach

    Directory of Open Access Journals (Sweden)

    Czech Artur

    2018-03-01

    Full Text Available Urban transport is considered the basis of properly functioning cities and their development. The main aim of the paper is to attempt the assessment of urban transport development in selected voivodeships (provinces as a crucial factor of macro logistics. The research also aimed to identify the underdeveloped areas of urban transport in Poland as the basis for the implementation of support policy. The source of information in the investigation process was data drawn from the Central Statistical Office in Poland for 2013–2016. In the scope of dealing with the research problem, chosen classical and order multivariate statistical measures were implemented into the research process. Next, the taxonomic measures for the years of interest served as the basis for the construction of the total (general synthetic measure applicable to the entire period. The main results and findings of the research indicate that the level of urban transport development is correlated with the whole transportation system which affects the socio-economic development of some regions of Poland. The research can lead to a better understanding of Polish urban transportation development in selected regions. Hence, the results can be helpful in the investment process and for shaping the right transportation policy to improve the use of financial resources.

  6. Developing micro-level urban ecosystem indicators for sustainability assessment

    Energy Technology Data Exchange (ETDEWEB)

    Dizdaroglu, Didem, E-mail: dizdaroglu@bilkent.edu.tr

    2015-09-15

    Sustainability assessment is increasingly being viewed as an important tool to aid in the shift towards sustainable urban ecosystems. An urban ecosystem is a dynamic system and requires regular monitoring and assessment through a set of relevant indicators. An indicator is a parameter which provides information about the state of the environment by producing a quantitative value. Indicator-based sustainability assessment needs to be considered on all spatial scales to provide efficient information of urban ecosystem sustainability. The detailed data is necessary to assess environmental change in urban ecosystems at local scale and easily transfer this information to the national and global scales. This paper proposes a set of key micro-level urban ecosystem indicators for monitoring the sustainability of residential developments. The proposed indicator framework measures the sustainability performance of urban ecosystem in 3 main categories including: natural environment, built environment, and socio-economic environment which are made up of 9 sub-categories, consisting of 23 indicators. This paper also describes theoretical foundations for the selection of each indicator with reference to the literature [Turkish] Highlights: • As the impacts of environmental problems have multi-scale characteristics, sustainability assessment needs to be considered on all scales. • The detailed data is necessary to assess local environmental change in urban ecosystems to provide insights into the national and global scales. • This paper proposes a set of key micro-level urban ecosystem indicators for monitoring the sustainability of residential developments. • This paper also describes theoretical foundations for the selection of each indicator with reference to the literature.

  7. Productive Urban Landscape In Developing Home Garden In Yogyakarta City

    Science.gov (United States)

    Irwan, S. N. R.; Sarwadi, A.

    2017-10-01

    Home garden is one type of agroecosystem that supports ecosystem services even in the urban settlement. The studies involved literature references and field survey along with a framework of the productive urban landscape that support ecosystem services in home garden. Productive urban landscape provided environmentally, socially and economically benefits that contained in ecosystem services. Problems on limited space in the urban settlement have to be managed by modified home garden system in order to work for ecosystem service in developing productive landscape. This study aimed to assess home garden (Pekarangan) system in a cluster of high density settlement in Yogyakarta City. Structured interview and vegetation identification of home garden have been conducted on 80 samples in Rejowinangun Kotagede District, Yogyakarta City. People showed enthusiasm in ecosystem services provided by home garden “Pekarangan Produktif” through developing productive urban landscape. Some benefits on ecosystem services of home garden were revealed on this study consisted of food production for sale (4.7%), home industry (7.69%), aesthetics (22.65%), food (14.10%), biodiversity (10.68%), ecosystem (12.82%), education (2.56), social interaction (11.54%), recreation (4.70%), and others (8.55%). Nevertheless, vegetation and other elements of home gardens have been managed irregularly and in particularly, the planned home gardens were only 17.07%. Actually, home gardens provided a large set of ecosystem services including being cultural services those are the category most valued. The urban people almost hided the understanding of the cultural benefit of ecosystem services of home garden, even though Yogyakarta has known the cultural city. Thus, urban home garden, as way as “Pekarangan Produktif” in the limited space that managed and planned sustainably, provide many benefits of ecosystem services in a productive urban landscape.

  8. Spatial and functional changes in recent urban development of Zagreb

    Directory of Open Access Journals (Sweden)

    Miroslav Sić

    2007-12-01

    Full Text Available This article discusses the urban development of Zagreb in the transition period. It analyses four processes which have caused spatial and functional changes in the cityćs development within its administrative limits. These are: the process of a new CBD establishment, expansion of hypermarkets and commercial centres, housing construction under new conditions and transportation problems and solutions. Under the influence of these processes the spatiofunctional structure of the city becomes more and more complex. In this connection the city has started to have more influence on the urban regions development.

  9. Research on the Development and Enlightenment of Urban Environmental Engineering

    Science.gov (United States)

    Tian, Mingjing; Li, Guanglou; Zhang, Lu; Shou, Youping; Li, Yajuan; Ye, Wei; Xu, Jing

    2018-04-01

    In recent years, under the promotion of reform and opening up, China's economic development has greatly accelerated, urbanization is also gradually accelerated. In the process of urbanization, there are many problems. The development of environmental engineering is one of the most important points. While building our living environment; we should also pay attention to the implementation of sustainable development strategies. First of all, This paper describes basic situation of environmental engineering, and finally provided some measures to promote the strengthening of China's environmental engineering

  10. The development and manufacture of wood composite wind turbine rotors

    Science.gov (United States)

    Zuteck, M. D.

    1982-01-01

    The physical properties, operational experience, and construction methods of the wood/epoxy composite MOD 0A wind turbine blades are considered. Blades of this type have accumulated over 10,000 hours of successful operation at the Kahuku, Hawaii and Block Island, Rhode Island test sites. That body of experience is summarized and related to the structural concepts and design drivers which motivated the original design and choice of interior layout. Actual manufacturing experience and associated low first unit costs for these blades, as well as projections for high production rates, are presented. Application of these construction techniques to a wide range of other blade sizes is also considered.

  11. Decades of urban growth and development on the Asian megadeltas

    Science.gov (United States)

    Small, Christopher; Sousa, Daniel; Yetman, Gregory; Elvidge, Christopher; MacManus, Kytt

    2018-06-01

    The current and ongoing expansion of urban areas worldwide represents the largest mass migration in human history. It is well known that the world's coastal zones are associated with large and growing concentrations of population, urban development and economic activity. Among coastal environments, deltas have long been recognized for both benefits and hazards. This is particularly true on the Asian megadeltas, where the majority of the world's deltaic populations reside. Current trends in urban migration, combined with demographic momentum suggest that the already large populations on the Asian megadeltas will continue to grow. In this study, we combine recently released gridded population density (circa 2010) with a newly developed night light change product (1992 to 2012) and a digital elevation model to quantify the spatial distribution of population and development on the nine Asian megadeltas. Bivariate distributions of population as functions of elevation and coastal proximity quantify potential exposure of deltaic populations to flood and coastal hazards. Comparison of these distributions for the Asian megadeltas show very different patterns of habitation with peak population elevations ranging from 2 to 11 m above sea level over a wide range of coastal proximities. Over all nine megadeltas, over 174 million people reside below a peak population elevation of 7 m. Changes in the spatial extent of anthropogenic night light from 1992 to 2012 show widely varying extents and changes of lighted urban development. All of the deltas except the Indus show the greatest increases in night light brightness occurring at elevations <10 m. At global and continental scales, growth of settlements of all sizes takes the form of evolving spatial networks of development. Spatial networks of lighted urban development in Asia show power law scaling properties consistent with other continents, but much higher rates of growth. The three largest networks of development in China all

  12. A framework for development of an intelligent system for design and manufacturing of stamping dies

    Science.gov (United States)

    Hussein, H. M. A.; Kumar, S.

    2014-07-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software.

  13. A framework for development of an intelligent system for design and manufacturing of stamping dies

    International Nuclear Information System (INIS)

    Hussein, H M A; Kumar, S

    2014-01-01

    An integration of computer aided design (CAD), computer aided process planning (CAPP) and computer aided manufacturing (CAM) is required for development of an intelligent system to design and manufacture stamping dies in sheet metal industries. In this paper, a framework for development of an intelligent system for design and manufacturing of stamping dies is proposed. In the proposed framework, the intelligent system is structured in form of various expert system modules for different activities of design and manufacturing of dies. All system modules are integrated with each other. The proposed system takes its input in form of a CAD file of sheet metal part, and then system modules automate all tasks related to design and manufacturing of stamping dies. Modules are coded using Visual Basic (VB) and developed on the platform of AutoCAD software

  14. The Development of High Temperature Thermoplastic Composite Materials for Additive Manufactured Autoclave Tooling

    Energy Technology Data Exchange (ETDEWEB)

    Kunc, Vlastimil [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Duty, Chad E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lindahl, John M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hassen, Ahmed A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-08-01

    In this work, ORNL and Techmer investigated and screened different high temperature thermoplastic reinforced materials to fabricate composite molds for autoclave processes using Additive Manufacturing (AM) techniques. This project directly led to the development and commercial release of two printable, high temperature composite materials available through Techmer PM. These new materials are targeted for high temperature tooling made via large scale additive manufacturing.

  15. Development of contour scanning parameters to improve surface finishing of additive manufactured parts

    CSIR Research Space (South Africa)

    Hoosain, Shaik

    2017-10-01

    Full Text Available Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques have been developed to accomplish this via melting...

  16. Development of iFab (Instant Foundry Adaptive Through Bits) Manufacturing Process and Machine Library

    Science.gov (United States)

    2012-08-01

    input shaft , pump, gearbox, rack & pinion… Wheel assy wheel, tire, drive hub, lug, spindle , bearing… Braking brake disc/drum, caliper, friction...processes and associated machines is provided. Progress with respect to Task 3 (to design and develop the Manufacturing Capability Modeling Environment...of Military Ground Vehicle Design , Materials, and Processes ............... 4 4.2 Task 2 Manufacturing Knowledge Characterization

  17. Mass balance-based regression modeling of PAHs accumulation in urban soils, role of urban development

    International Nuclear Information System (INIS)

    Peng, Chi; Wang, Meie; Chen, Weiping; Chang, Andrew C.

    2015-01-01

    We investigated the polycyclic aromatic hydrocarbons (PAHs) contents in 68 soils samples collected at housing developments that represent different length of development periods across Beijing. Based on the data, we derived a mass balanced mathematical model to simulate the dynamics of PAH accumulations in urban soils as affected by the urban developments. The key parameters were estimated by fitting the modified mass balance model to the data of PAH concentrations vs. building age of the sampling green area. The total PAH concentrations would increase from the baseline of 267 ng g −1 to 3631 ng g −1 during the period of 1978–2048. It showed that the dynamic changes in the rates of accumulations of light and heavy PAH species were related to the shifting of sources of fuels, combustion efficiencies, and amounts of energy consumed during the course of development. - Highlights: • Introduced a mass balance model for soil PAHs accumulation with urbanization. • Reconstructed the historical data of PAH accumulation in soil of Beijing, China. • The soil PAH concentrations would be doubled in the following 40 years. • The composition of PAH emissions were shifting to light PAH species. - Introduced a regression modeling approach to predict the changes of PAH concentrations in urban soil

  18. Development of Self-Luminous Glass Tube (SLGT) Manufacturing Technology

    International Nuclear Information System (INIS)

    Kim, Kwang Sin; Kim, Kyeong Sook; Chung, Eun Su; Song, Kyu Min; Lee, Sook Kyung; Son, Soon Hwan

    2005-01-01

    Tritium produced from the Wolsong Tritium Removal Facility (WTRF) will be a radioactive waste when it is stored in the vault inside the WTRF, which requires maintenance cost and is a troublesome waste such that it cannot be sent to the radioactive waste disposal facility. However, when tritium is utilized it can be valuable resource for many applications. As a starting point to utilize tritium we tried to domesticate the selfluminous glass tube (SLGT) manufacturing technology. As a hydrogen isotope, tritium has similar chemical properties to hydrogen but slightly different physical properties. Due to its unstable nature, tritium emits beta rays, which are streams of electrons, with 0∼18.6 keV (5.7 keV in average) energies and 12.323 years of a half-life. The energy level of tritium is relatively low and the biological effects of tritium to the human body are not significant, which makes tritium a popular radioactive isotope for use in industries. The electrons in a beta ray collide with phosphor to produce light so that tritium sealed in phosphor coated glass tubes can make the tubes glow without an external supply of energy. To manufacture these SLGTs, 4 core technologies are needed: coating technology, tritium injection technology, laser sealing/cutting technology and tritium handling technology

  19. Urban landscape architecture design under the view of sustainable development

    Science.gov (United States)

    Chen, WeiLin

    2017-08-01

    The concept of sustainable development in modern city landscape design advocates landscape architecture, which is the main development direction in the field of landscape design. They are also effective measures to promote the sustainable development of city garden. Based on this, combined with the connotation of sustainable development and sustainable design, this paper analyzes and discusses the design of urban landscape under the concept of sustainable development.

  20. Developing micro-level urban ecosystem indicators for sustainability assessment

    International Nuclear Information System (INIS)

    Dizdaroglu, Didem

    2015-01-01

    Sustainability assessment is increasingly being viewed as an important tool to aid in the shift towards sustainable urban ecosystems. An urban ecosystem is a dynamic system and requires regular monitoring and assessment through a set of relevant indicators. An indicator is a parameter which provides information about the state of the environment by producing a quantitative value. Indicator-based sustainability assessment needs to be considered on all spatial scales to provide efficient information of urban ecosystem sustainability. The detailed data is necessary to assess environmental change in urban ecosystems at local scale and easily transfer this information to the national and global scales. This paper proposes a set of key micro-level urban ecosystem indicators for monitoring the sustainability of residential developments. The proposed indicator framework measures the sustainability performance of urban ecosystem in 3 main categories including: natural environment, built environment, and socio-economic environment which are made up of 9 sub-categories, consisting of 23 indicators. This paper also describes theoretical foundations for the selection of each indicator with reference to the literature [tr

  1. The integrated indicator of sustainable urban development based on standardization

    Directory of Open Access Journals (Sweden)

    Leonova Tatiana

    2018-01-01

    Full Text Available The paper justifies the necessity for the system of planned indicators for sustainable urban development design in accordance with the requirements of international standards and the Russian standard GOST R ISO 37120-2015, and the estimation of their actual achievement based on complex qualimetric models. An analysis of opinions on this issue and an overview of Russian normative documents for assessing the effectiveness of the municipalities, including urban development are presented. General methodological principles and sequence for the construction of qualimetric models, as well as formulas for the calculation of complex indicators, taking into account the specific weights obtained on the basis of expert assessment, are presented, the need for careful selection of experts and determination of the consistency of expert opinions is indicated. The advantages and disadvantages of this approach are shown. Conclusions are drawn on the use of qualimetric models for sustainable urban development.

  2. A vision on methodology for integrated sustainable urban development: bequest

    NARCIS (Netherlands)

    Bentivegna, V.; Curwell, S.; Deakin, M.; Lombardi, P.; Mitchell, G.; Nijkamp, P.

    2002-01-01

    The concepts and visions of sustainable development that have emerged in the post-Brundtland era are explored in terms laying the foundations for a common vision of sustainable urban development (SUD). The described vision and methodology for SUD resulted from the activities of an international

  3. Driving factors of urban land growth in Guangzhou and its implications for sustainable development

    Science.gov (United States)

    Cui, Xuezhu; Li, Shaoying; Wang, Xuetong; Xue, Xiaolong

    2018-04-01

    Since 2000, China's urban land has expanded at a dramatic speed because of the country's rapid urbanization. The country has been experiencing unbalanced development between rural and urban areas, causing serious challenges such as agricultural security and land resources waste. Effectively evaluating the driving factors of urban land growth is essential for improving efficient land use management and sustainable urban development. This study established a principal component regression model based on eight indicators to identify their influences on urban land growth in Guangzhou. The results provided a grouping analysis of the driving factors, and found that economic growth, urban population, and transportation development are the driving forces of urban land growth of Guangzhou, while the tertiary industry has an opposite effect. The findings led to further suggestions and recommendations for urban sustainable development. Hence, local governments should design relevant policies for achieving the rational development of urban land use and strategic planning on urban sustainable development.

  4. An updated methodology to review developing-country vaccine manufacturer viability.

    Science.gov (United States)

    Luter, Nicholas; Kumar, Ritu; Hozumi, Dai; Lorenson, Tina; Larsen, Shannon; Gowda, Bhavya; Batson, Amie

    2017-07-05

    In 1997, Milstien, Batson, and Meaney published "A Systematic Method for Evaluating the Potential Viability of Local Vaccine Producers." The paper identified characteristics of successful vaccine manufacturers and developed a viability framework to evaluate their performance. This paper revisits the original study after two decades to determine the ability of the framework to predict manufacturer success. By reconstructing much of the original dataset and conducting in-depth interviews, the authors developed informed views on the continued viability of manufacturers in low- and middle-income country markets. Considering the marked changes in the market and technology landscape since 1997, the authors find the viability framework to be predictive and a useful lens through which to evaluate manufacturer success or failure. Of particular interest is how incumbent and potentially new developing-country vaccine manufacturers enter and sustain production in competitive international markets and how they integrate (or fail to integrate) new technology into the production process. Ultimately, most manufacturers will need to meet global quality standards to be viable. As governments and donors consider investments in vaccine producers, the updated viability factors will be a useful tool in evaluating the prospects of manufacturers over the mid to long term. The paper emphasizes that while up-front investments are important, other critical factors-including investments in a national regulatory authority, manufacturer independence, and ability to adapt and adopt new technology-are necessary to ensure viability. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  5. Urban development control based on transportation carrying capacity

    Science.gov (United States)

    Miharja, M.; Sjafruddin, A. H.

    2017-06-01

    Severe transportation problems in Indonesian urban areas are stimulated by one fundamental factor, namely lack of awareness on transportation carrying capacity in these areas development control. Urban land use development towards more physical coverage is typically not related with the capability of transportation system to accommodate additional trips volume. Lack of clear connection between development permit with its implication on the transportation side has led to a phenomenon of exceeding transport demand over supply capacity. This paper discusses the concept of urban land use development control which will be related with transport carrying capacity. The discussion would cover both supply and demand sides of transportation. From supply side, the analysis regarding the capacity of transport system would take both existing as well as potential road network capacity could be developed. From demand side, the analysis would be through the control of a maximum floor area and public transport provision. Allowed maximum floor area for development would be at the level of generating traffic at reasonable volume. Ultimately, the objective of this paper is to introduce model to incorporate transport carrying capacity in Indonesian urban land use development control.

  6. Spatial and functional changes in recent urban development of Zagreb

    Directory of Open Access Journals (Sweden)

    Miroslav Sić

    2007-01-01

    Full Text Available This article discusses the urban development of Zagreb in the transition period. It analysesfour processes which have caused spatial and functional changes in the city’s developmentwithin its administrative limits. These are: the process of a new CBD establishment, expansionof hypermarkets and commercial centres, housing construction under new conditions andtransportation problems and solutions. Under the influence of these processes the spatiofunctionalstructure of the city becomes more and more complex. In this connection the cityhas started to have more influence on the urban region’s development.

  7. Dilemmas of energy efficient urban development in three Nordic cities

    DEFF Research Database (Denmark)

    Große, Juliane; Fertner, Christian; Groth, Niels Boje

    Energy is high on the agenda of the European Union and in current urban development. In this study we focus on the role of urban planning in energy efficiency in 3 Northern European cities - Turku (FI), Eskilstuna (SE) and Tartu (EE). The case studies were developed in close collaboration between...... the authors and representatives of the cities. The research was carried out by field trips, interviews and analysis of local reports and planning documents. This work was done in the framework of the EU-FP7 project PLEEC (Planning for energy efficient cities), GA no. 314704, www.pleecproject.eu...

  8. An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

    Science.gov (United States)

    Sampson, Paul G.; Sny, Linda C.

    1992-01-01

    The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

  9. Urban Slums and Children's Health in Less-Developed Countries

    Directory of Open Access Journals (Sweden)

    Andrew K. Jorgenson

    2015-08-01

    Full Text Available We utilize first-difference panel regression analysis to assess the direct effect of urban slumprevalence on national level measures of under-5 mortality rates over the period 1990 to 2005.Utilizing data on 80 less developed countries, the results illustrate increasing urban slumprevalence over the period is a robust predictor of increasing child mortality rates. This effectobtains net the statistically significant influence of gross domestic product per capita, fertilityrate, and educational enrollment. Cross-sectional analyses for 2005 that include additionalcontrols provide further evidence of the mortality / urban slum relationship. The results confirmurban slum prevalence growth is an important contextual dynamic whereby the socialproduction of child mortality is enacted in the less developed countries.

  10. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  11. Development work for the manufacture of a blanket shield prototype for ITER

    International Nuclear Information System (INIS)

    Boireau, B.; Boudot, C.; Cottin, A.; Lorenzetto, P.; Jacquinot, F.; Bucci, P.; Gillia, O.; Vidotto, F.

    2006-01-01

    In the frame of the blanket development for ITER, an R-and-D programme was implemented for the manufacture of a shield prototype by powder Hot Isostatic Pressing (HIPping). The shield consists of a Stainless steel forged block drilled and machined, at the back of which 3D bent tubes are HIPped inside a powder layer. This paper describes the development work through the manufacturing of several mock ups that leads us to be confident for the shield prototype manufacturing. The paper is divided into 2 parts, the first one related to the machining development and validation, the second one relating to the HIP development and validation. A partial full scale mock up for the machining development (machined PFSMU) was manufactured with no particular problems, all the main identified difficulties in machining like deep drilling and castellation machining where overcome and the mock up was conform to the specification. The manufacturing of a HIPped PFSMU for the HIP development was done after the manufacturing of smaller mock-ups each representing a particular detailed design point. A computer simulation work gave us some design recommendation, and the compared analysis of the numerical simulation and experimental results lead us to predict the distortions on the PFSMU HIPped mock up. The HIPped distortions that were the main uncertainty were assessed through small mock ups and bigger one. The mechanical characteristics of the joints are conform to the specification. Associated to the mock up manufacturing is the ultrasonic test development which consists in designing and manufacturing a miniaturized probe travelling inside the bent tube after the HIP cycle to examine the joint tube / powder among others. This ultrasonic development allowed the examination of the HIPped PFSMU mock up that concluded this development work. (author)

  12. The manufacture of transit. Border control, urban trends and migrant trajectories in Nouadhibou (Mauritania)

    OpenAIRE

    Streiff-Fénart , Jocelyne

    2012-01-01

    International audience; This chapter examines different forms of migrant integration in Nouadhibou, Mauritania. In this town, the activities developed by transit migrants have been integrated in the local economic network, which is largely articulated around the activities of waves of earlier migrants that have been instilled with a renewed dynamism by newcomers. Since the implementation of border surveillance measures in 2006, transit migration has been identified as the target of specific (...

  13. Sustainable Urban Development – Compact Cities or Consumer Practices?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Christensen, Toke Haunstrup; Gram-Hanssen, Kirsten

    2011-01-01

    Sustainability in urban planning has a long history and it has been a widespread solution to build high and compact in order to minimise the need for transportation, land use and heating. Recent research, however, points towards the need for a supplementary approach, which includes the consumer...... behaviour of the household. This approach necessarily has to work from below and include the citizens, as it is their daily practices that have to be challenged. This article reviews selected literature and studies on whether compact cities leads to more sustainable cities, and it use lifestyle...... strategies of achieving sustainable urban development....

  14. The development and redevelopment of the urban villages in Shenzen.

    NARCIS (Netherlands)

    Hao, P.; Sliuzas, R.; Geertman, S.C.M.

    2011-01-01

    China, like many other developing countries, has seen a huge influx of population into its cities coupled with urban expansion. The presence of massive numbers of rural migrants in cities does not result in slums or squatters due to institutional constraints. In the absence of government help,

  15. Do urbanization and industrialization affect energy intensity in developing countries?

    International Nuclear Information System (INIS)

    Sadorsky, Perry

    2013-01-01

    Against a backdrop of concerns about climate change, peak oil, and energy security issues, reducing energy intensity is often advocated as a way to at least partially mitigate these impacts. This study uses recently developed heterogeneous panel regression techniques like mean group estimators and common correlated effects estimators to model the impact that income, urbanization and industrialization has on energy intensity for a panel of 76 developing countries. In the long-run, a 1% increase in income reduces energy intensity by − 0.45% to − 0.35%. Long-run industrialization elasticities are in the range 0.07 to 0.12. The impact of urbanization on energy intensity is mixed. In specifications where the estimated coefficient on urbanization is statistically significant, it is slightly larger than unity. The implications of these results for energy policy are discussed. - Highlights: ► The impact of urbanization and industrialization on energy intensity is modeled. ► Use recently developed heterogeneous panel regression techniques ► The model is tested on a panel of developing countries. ► Income has a negative impact on energy intensity. ► Industrialization has a positive impact on energy intensity

  16. Beyond Draining the Swamp: Urban Development and Counterterrorism in Morocco

    Science.gov (United States)

    2006-10-01

    specialist Mohammed Haddy. “When a breadwinner is sick, leaders come to the family with a doctor, take care of the family, and provide all that they need...Socioeconomic Development: Not Just Demolition but Rebuilding Community While this analysis looks at Morocco’s urban policies in light of today’s

  17. Impact of development and urbanization on variation of water quality ...

    African Journals Online (AJOL)

    The spatial and temporal variations of the physico-chemical water quality parameters, microfauna and micro-flora composition of the Nima Creek in Accra vividly illustrate the environmental problems associated with water bodies in a community where development and urbanization are in progress. Monthly water and ...

  18. The Role of Leadership in Urban Development: Reflections from ...

    African Journals Online (AJOL)

    The central argument of this paper is that cities and towns in Tanzania are facing leadership challenge which has a crippling effect to sustainable growth of urban centers. The objective of this paper was to map out how different understanding of leadership has affected the trajectory of development of cities in Tanzania.

  19. A Scanning scheimpflug lidar system developed for urban pollution monitoring

    Science.gov (United States)

    Yang, Yang; Guan, Peng; Mei, Liang

    2018-04-01

    A scanning Scheimpflug lidar system based on the Scheimpflug principle has been developed by employing a high power multimode 808 nm laser diode and a highly integrated CMOS sensor in Dalian University of Technology, Dalian, Northern China. Atmospheric scanning measurements in urban area were performed for the studies of particle emission sources.

  20. Professional Development Urban Schools: What Do Teachers Say?

    Science.gov (United States)

    Green, Tanya R.; Allen, Mishaleen

    2015-01-01

    This quantitative causal-comparative study compared perceptions of professional development opportunities between high-achieving and low-achieving elementary-middle school teachers in an urban school district using the Standards Assessment Inventory (SAI). A total of 271 teachers participated including 134 (n = 134) teachers from high-achieving…

  1. [Migration, urbanization, and development policy in Senegal].

    Science.gov (United States)

    Dione, D

    1992-01-01

    "The various studies focussing on human settlements in Senegal show that the share of population living in cities is ever increasing because of the massive and continuous flow from rural areas. The persistance of such migration trends from the country to cities deepens regional disparities, compounds the difficulties and cost of city management and development, specially in the case of Dakar, and runs counter to the goals of social and economic development plans.... The growing importance of such phenomena calls for the designing of corrective measures in favour of rural areas and small towns in order to settle rural populations and halt the inordinate and chaotic geographical growth of large cities. Failing this, development efforts may well be compromised." (SUMMARY IN ENG) excerpt

  2. Integrated management of water resources in urban water system: Water Sensitive Urban Development as a strategic approach

    Directory of Open Access Journals (Sweden)

    Juan Joaquín Suárez López

    2014-08-01

    Full Text Available The urban environment has to be concerned with the integrated water resources management, which necessarily includes the concept of basin unity and governance.  The traditional urban water cycle framework, which includes water supply, sewerage and wastewater treatment services, is being replaced by a holistic and systemic concept, where water is associated with urbanism and sustainability policies. This global point of view cannot be ignored as new regulations demand systemic and environmental approaches to the administrations, for instance, in the management of urban drainage and sewerage systems. The practical expression of this whole cluster interactions is beginning to take shape in several countries, with the definition of Low Impact Development and Water Sensitivity Urban Design concepts. Intends to integrate this new strategic approach under the name: “Water Sensitive Urban Development” (WSUD. With WSUD approach, the current urban water systems (originally conceived under the traditional concept of urban water cycle can be transformed, conceptual and physically, for an integrated management of the urban water system in new models of sustainable urban development. A WSUD implementing new approach to the management of pollution associated with stormwater in the urban water system is also presented, including advances in environmental regulations and incorporation of several techniques in Spain.

  3. Public health implications of urban air pollution in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Schwela, D H [World Health Organisation, Geneva (Switzerland)

    1996-12-31

    Exposure to air pollution is an almost inescapable part of urban life throughout the world. Ambient air pollutant levels in urban areas are generally a reflection of emissions. For sulphur dioxide, total suspended particulate matter and lead, ambient concentrations are declining in the industrialized western countries. For nitrogen dioxide, ambient levels in cities are generally constant, or slightly increasing. For carbon dioxide, they are variable, declining where controls are being applied. In a substantial number of cities, particularly in developing countries, WHO guidelines are being often exceeded for the compounds mentioned. Given the rate at which these cities are growing, the air pollution situation will probably worsen if environmental control measures are not implemented. As a consequence, the health and well-being of urban residents will further deteriorate with high ambient air pollutant concentrations causing increased mortality, morbidity, deficits on pulmonary functions and cardiovascular and neurobehavioural effects. (author)

  4. Public health implications of urban air pollution in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Schwela, D.H. [World Health Organisation, Geneva (Switzerland)

    1995-12-31

    Exposure to air pollution is an almost inescapable part of urban life throughout the world. Ambient air pollutant levels in urban areas are generally a reflection of emissions. For sulphur dioxide, total suspended particulate matter and lead, ambient concentrations are declining in the industrialized western countries. For nitrogen dioxide, ambient levels in cities are generally constant, or slightly increasing. For carbon dioxide, they are variable, declining where controls are being applied. In a substantial number of cities, particularly in developing countries, WHO guidelines are being often exceeded for the compounds mentioned. Given the rate at which these cities are growing, the air pollution situation will probably worsen if environmental control measures are not implemented. As a consequence, the health and well-being of urban residents will further deteriorate with high ambient air pollutant concentrations causing increased mortality, morbidity, deficits on pulmonary functions and cardiovascular and neurobehavioural effects. (author)

  5. Developing an urban forest carbon market

    Science.gov (United States)

    M. Armstrong; J. Siry; Michael Bowker

    2009-01-01

    Countries, states, localities, businesses, and individuals are taking action to mitigate greenhouse gas levels and production as a response to concerns over climate change. Europe currently has mandatory greenhouse gas emission legislation and a large developed emission trading market, as opposed to the U.S. where voluntary markets to reduce green house gas emissions...

  6. Cloudland, stronzoland, brisbane: Urban development and ethnic ...

    African Journals Online (AJOL)

    Brisbane's recovery from its somewhat shady past involving corrupt government and law enforcement echoes the journey upon which Armanno's protagonists ... Brisbane and using critical definitions of Bildung and the notion of ethnic Bildungsromane, this paper aims to examine the parallel development of the Italian ...

  7. Assessment of sustainable urban transport development based on entropy and unascertained measure.

    Science.gov (United States)

    Li, Yancang; Yang, Jing; Shi, Huawang; Li, Yijie

    2017-01-01

    To find a more effective method for the assessment of sustainable urban transport development, the comprehensive assessment model of sustainable urban transport development was established based on the unascertained measure. On the basis of considering the factors influencing urban transport development, the comprehensive assessment indexes were selected, including urban economical development, transport demand, environment quality and energy consumption, and the assessment system of sustainable urban transport development was proposed. In view of different influencing factors of urban transport development, the index weight was calculated through the entropy weight coefficient method. Qualitative and quantitative analyses were conducted according to the actual condition. Then, the grade was obtained by using the credible degree recognition criterion from which the urban transport development level can be determined. Finally, a comprehensive assessment method for urban transport development was introduced. The application practice showed that the method can be used reasonably and effectively for the comprehensive assessment of urban transport development.

  8. Actors and processes behind urban fringe development: Mechanism to guide urban land management. Study on Dhaka, Bangladesh

    OpenAIRE

    Masum, Fahria

    2009-01-01

    This thesis has attempted to analyze and resolve urban fringe problems in Dhaka by incorporating different roles and interests of actors in land development processes. The research has revealed that these different actors have different interests, norms and ideologies which are playing an active role in guiding or regulating urban land development process. This situation is deploying existing rules and regulations in form of politics and affecting urban fringe management negatively. The resea...

  9. Networking - The Urban and Regional Development Strategy?

    OpenAIRE

    Maria Nowicka-Skowron; Piotr Pachura

    2008-01-01

    It has become more and more common to claim that the concept of innovations embraces everything that is connected with creation and application of new knowledge in order to win competitive advantage. In this respect innovations concern as well, apart from technology, economy, society and culture. A traditional approach applied by organizational and management sciences is not enough to explain and manage the development of enterprises as well as that of cities, regions and countries. Simultane...

  10. NETWORKING - THE URBAN AND REGIONAL DEVELOPMENT STRATEGY?

    OpenAIRE

    MARIA NOWICKA-SKOWRON; DEJAN ERIĆ; IVONNE GRABARA; IOAN COSMESCU

    2011-01-01

    The concept of innovations embraces everything that is connected with creation and application of new knowledge in order to win competitive advantage. A traditional approach applied by organizational and management sciences are not enough to explain and manage the development of enterprises as well as that of cities, regions and countries. According to a new approach to innovativeness, creation of innovations depends on a complex/system approach. A phenomenon of particular importance is the a...

  11. Overcoming the Crises: Integration and Urban Development

    DEFF Research Database (Denmark)

    Skak, Morten; Bloze, Gintautas

    This paper explores the effect of housing costs on residential mobility. Decisions to move depend not only on job or family related reasons but also on the relative costs of housing. There are several channels through which developments in housing market can affect household mobility. During...... on mobility we use Danish register-based micro data. It allows us to control for a variety of socio-demographic characteristics of households, as well as characteristics of housing....

  12. Urban Development from the Perspective of Geodivesity in South Korea

    Science.gov (United States)

    Mo, Y.; Lee, D. K.; Han Kyul, H.

    2015-12-01

    In regard to ensuring a sustainable Earth, geodiversity (which is the variety of non-living nature) has been recognized as being equivalent to biodiversity in terms of importance. Geodiversity, as a platform, provides diverse habitats; however when a city is developed, threatened and vulnerable species are seen as important components of conservation but geodiversity is not. This study analyzes the components of geodiversity in cities that developed rapidly, and identifies which characteristics of geodiversity were related to this development. We estimated the components of geodiversity through the use of land cover maps and digital elevation maps (DEMs) in South Korean cities that developed rapidly between the 1980s and early-2010s, such as Yong-in and Namyangju. The relationships between land use changes and geodiversity components were analyzed and a factor analysis for land use changes was conducted using geodiversity components. Results show that even though adjacent rivers and streams, low elevation, and flat surfaces have high geodiversity, these areas were mainly converted into built-up areas and agricultural areas. As such, it can be stated that urban development in these cities has lowered geodiversity. Other geodiversity components related to urban development, such as slope, upslope contributing areas, streams, and lithology, were also identified. To conclude, this study showed how geodiversity components related to urban development has been affected by this growth and how they are intimately connected to each other. Identifying geodiversity in future development sites could help to estimate the most sensitive areas regarding the planned development; therefore, we need to view urban development from a geodiversity perspective.

  13. Recent urban policy and development in China: a reversal of "anti-urbanism".

    Science.gov (United States)

    Kwok, R Y

    1987-10-01

    The nature of and reasons for China's urban distribution policy adopted in 1982 are examined. The influence of socialist planning ideology on urban policy is noted. Contradictions between economic reform and urban policies are identified.

  14. Multi-Temporal Multi-Sensor Analysis of Urbanization and Environmental/Climate Impact in China for Sustainable Urban Development

    Science.gov (United States)

    Ban, Yifang; Gong, Peng; Gamba, Paolo; Taubenbock, Hannes; Du, Peijun

    2016-08-01

    The overall objective of this research is to investigate multi-temporal, multi-scale, multi-sensor satellite data for analysis of urbanization and environmental/climate impact in China to support sustainable planning. Multi- temporal multi-scale SAR and optical data have been evaluated for urban information extraction using innovative methods and algorithms, including KTH- Pavia Urban Extractor, Pavia UEXT, and an "exclusion- inclusion" framework for urban extent extraction, and KTH-SEG, a novel object-based classification method for detailed urban land cover mapping. Various pixel- based and object-based change detection algorithms were also developed to extract urban changes. Several Chinese cities including Beijing, Shanghai and Guangzhou are selected as study areas. Spatio-temporal urbanization patterns and environmental impact at regional, metropolitan and city core were evaluated through ecosystem service, landscape metrics, spatial indices, and/or their combinations. The relationship between land surface temperature and land-cover classes was also analyzed.The urban extraction results showed that urban areas and small towns could be well extracted using multitemporal SAR data with the KTH-Pavia Urban Extractor and UEXT. The fusion of SAR data at multiple scales from multiple sensors was proven to improve urban extraction. For urban land cover mapping, the results show that the fusion of multitemporal SAR and optical data could produce detailed land cover maps with improved accuracy than that of SAR or optical data alone. Pixel-based and object-based change detection algorithms developed with the project were effective to extract urban changes. Comparing the urban land cover results from mulitemporal multisensor data, the environmental impact analysis indicates major losses for food supply, noise reduction, runoff mitigation, waste treatment and global climate regulation services through landscape structural changes in terms of decreases in service area, edge

  15. Nanoimprint system development and status for high volume semiconductor manufacturing

    Science.gov (United States)

    Hiura, Hiromi; Takabayashi, Yukio; Takashima, Tsuneo; Emoto, Keiji; Choi, Jin; Schumaker, Phil

    2016-10-01

    Imprint lithography has been shown to be an effective technique for replication of nano-scale features. Jet and Flash Imprint Lithography* (J-FIL*) involves the field-by-field deposition and exposure of a low viscosity resist deposited by jetting technology onto the substrate. The patterned mask is lowered into the fluid which then quickly flows into the relief patterns in the mask by capillary action. Following this filling step, the resist is crosslinked under UV radiation, and then the mask is removed, leaving a patterned resist on the substrate. There are many criteria that determine whether a particular technology is ready for wafer manufacturing. For imprint lithography, recent attention has been given to the areas of overlay, throughput, defectivity, and mask replication. This paper reviews progress in these critical areas. Recent demonstrations have proven that mix and match overlay of less than 5nm can achieved. Further reductions require a higher order correction system. Modeling and experimental data are presented which provide a path towards reducing the overlay errors to less than 3nm. Throughput is mainly impacted by the fill time of the relief images on the mask. Improvement in resist materials provides a solution that allows 15 wafers per hour per station, or a tool throughput of 60 wafers per hour. Defectivity and mask life play a significant role relative to meeting the cost of ownership (CoO) requirements in the production of semiconductor devices. Hard particles on a wafer or mask create the possibility of inducing a permanent defect on the mask that can impact device yield and mask life. By using material methods to reduce particle shedding and by introducing an air curtain system, the lifetime of both the master mask and the replica mask can be extended. In this work, we report results that demonstrate a path towards achieving mask lifetimes of better than 1000 wafers. Finally, on the mask side, a new replication tool, the FPA-1100NR2 is

  16. Finances and governance of urban local bodies: an approach of urban development perspective from a developing country (India

    Directory of Open Access Journals (Sweden)

    Suman PAUL

    2014-12-01

    Full Text Available With rapid urbanisation and the pressure on urban areas for service delivery, the role of urban local governments is undoubtedly becoming important and, here, their financial capacity can hold the key. At the same time, there are several issues in urban governance that need to be addressed yet. Delegation of decision making powers to urban local bodies (ULBs, which are traditionally considered as a part of the system of State government and acting on behalf of it, is one of them. The constitutional mechanisms like inter-governmental fiscal transfers were an attempt to reduce the gap of ULBs, but they were not effective in implementation at ground. It has become imperative now to understand the financial position of ULBs in order to move forward with the new means of fund flow. This paper presents a cross sectional analysis of the finance of 27 ULBs in North 24 Parganas District of West Bengal, India in terms of their financial base and its adequacy vis-à-vis norms, and their revenue and expenditure performance. Using certain ratios, the relative performance of municipalities on dependency measures was also assessed. The implications of finances of ULBs, in terms of raising resources, improving inter-governmental transfers and charting new mechanisms are also discussed. Lastly, an approach has been made to develop an index, i.e. Urban Governance Index (UGI to a better understanding of the per-capita expenditure scenario of ULBs.

  17. NETWORKING - THE URBAN AND REGIONAL DEVELOPMENT STRATEGY?

    Directory of Open Access Journals (Sweden)

    PIOTR PACHURA

    2008-01-01

    Full Text Available It has become more and more common to claim that the concept of innovations embraces everything that is connected with creation and application of new knowledge in order to win competitive advantage. In this respect innovations concern as well, apart from technology, economy, society and culture. A traditional approach applied by organizational and management sciences is not enough to explain and manage the development of enterprises as well as that of cities, regions and countries. Simultaneously, according to a new approach to innovativeness, creation of innovations depends on a complex/system approach. The word complex is vital since this approach should embrace the complexity of innovative networks as well as complexity of relations of cooperation and the whole network environment together with social context.

  18. 3D metal droplet printing development and advanced materials additive manufacturing

    Directory of Open Access Journals (Sweden)

    Lawrence E. Murr

    2017-01-01

    Full Text Available While commercial additive manufacturing processes involving direct metal wire or powder deposition along with powder bed fusion technologies using laser and electron beam melting have proliferated over the past decade, inkjet printing using molten metal droplets for direct, 3D printing has been elusive. In this paper we review the more than three decades of development of metal droplet generation for precision additive manufacturing applications utilizing advanced, high-temperature metals and alloys. Issues concerning process optimization, including product structure and properties affected by oxidation are discussed and some comparisons of related additive manufactured microstructures are presented.

  19. NASA's Additive Manufacturing Development Materials Science to Technology Infusion - Connecting the Digital Dots

    Science.gov (United States)

    Vickers, John

    2017-01-01

    At NASA, the first steps of the Journey to Mars are well underway with the development of NASA's next generation launch system and investments in research and technologies that should increase the affordability, capability, and safety of exploration activities. Additive Manufacturing presents a disruptive opportunity for NASA to design and manufacture hardware with new materials at dramatically reduced cost and schedule. Opportunities to incorporate additive manufacturing align very well with NASA missions and with most NASA programs related to space, science, and aeronautics. The Agency also relies on many partnerships with other government agencies, industry and academia.

  20. Innovative economic structures – support for development of urban systems

    Directory of Open Access Journals (Sweden)

    Florin Marian Buhociu

    2013-12-01

    Full Text Available Training and development of urban systems (US is a main direction of territorial and regional development which requires multiple studies, including those of economic background. They should aim to highlight, on the one hand, the economic potential of geographical areas making up the urban system and secondly to assess development trends you need to focus their own resources and those that are to be attracted to getting a economic trend upward in that area. It is therefore very important a zonal configuration of the urban system by following the joint capitalization of existing human and material resources, including by building synergy effect to be achieved following the joint evolution of settlements in the US. Along with the development of US is required, from the economical point of view, to implement new forms of economic structures to directly potentate the development of the area through constant cooperation, innovation and transfer of know-how. Romania currently has seven major urban centers that were selected and were assigned the role of growth poles. There were also 13 designated urban growth poles, including Galati and Braila. Urban agglomeration formed by the two municipalities, located at a distance from each other of about 25 km, is the second largest in the country after Bucharest. There is currently underway specialized documentation to achieve an optimal configuration for US Galati-Braila. From the economic point of view in the respective area can be implemented new development structures of cluster (Porter, M.E.,2000 type aimed at achieving the competitiveness poles and which will constitute the true engine of economic development. These two new structures of economic development are characterized by the fact that they allow and provide the necessary conditions to attract the systems and modern technologies to build local innovation systems that can be integrated into similar systems at regional and even national level. It is

  1. Opportunities and challenges within urban health and sustainable development

    DEFF Research Database (Denmark)

    Fisher, Jack E.; Andersen, Zorana J.; Loft, Steffen

    2017-01-01

    The United Nations’ Sustainable Development Goals mark aunique window of opportunity for both human and planetaryhealth. With rising life expectancy and rapidly expanding urbanpopulations exposed to pollution and sedentary lifestyles, thereis a greater focus on reducing the gap between life...... expectancyand number of healthy years lived, whilst limiting anthropogenicactivities contributing to pollution and climate change. Thus,urban development and policies, which can create win–winsituations for our planet and human health, falls into the realmand expertise of public health. However, some...

  2. Achiving sustainability in urban transport in developing and transition countries

    Energy Technology Data Exchange (ETDEWEB)

    Braeuninger, Michael; Schulze, Sven; Leschus, Leon [Hamburg Institute of International Economics (HWWI), Hamburg (Germany); Perschon, Juergen; Hertel, Christof; Field, Simon; Foletta, Nicole [European Institute for Sustainable Transport (EURIST), Hamburg (Germany)

    2012-01-15

    Sustainable transport is an urging issue on a few accounts: The transport sector was responsible for 23% global CO{sub 2} emission in 2007. It also has a number of other effects like air and noise pollution, land use etc. These effects are especially relevant in cities, where already half of the world's population is living today. With a growing world population and ongoing urbanisation the number and share of city dwellers will rise considerably in the next decades. Thus, sustainability in urban transport becomes increasingly important. This report first provides a short overview of the most important data behind the sustainability problems in urban transport. Then the question is addressed, what sustainable mobility is and where the main obstacles are on the path to more sustainability. The central part of the study deals with the most important policies and instruments enhancing sustainable (urban) mobility. The main feature of each section within that part of the study is the combination of theoretical background information and arguments with case studies from developing and transition countries. Accordingly, the reader gets an idea of the vast range of available instruments in order to promote sustainable mobility. But it is also shown that it is not only necessary but also possible to introduce or enhance sustainable urban transport regardless of the income position of the specific region, country or city. Besides, success factors for different instruments are identified, thereby deriving promising routes for countries or a group of countries according to their state of economic development. (orig.)

  3. An analytic framework for developing inherently-manufacturable pop-up laminate devices

    International Nuclear Information System (INIS)

    Aukes, Daniel M; Goldberg, Benjamin; Wood, Robert J; Cutkosky, Mark R

    2014-01-01

    Spurred by advances in manufacturing technologies developed around layered manufacturing technologies such as PC-MEMS, SCM, and printable robotics, we propose a new analytic framework for capturing the geometry of folded composite laminate devices and the mechanical processes used to manufacture them. These processes can be represented by combining a small set of geometric operations which are general enough to encompass many different manufacturing paradigms. Furthermore, such a formulation permits one to construct a variety of geometric tools which can be used to analyze common manufacturability concepts, such as tool access, part removability, and device support. In order to increase the speed of development, reduce the occurrence of manufacturing problems inherent with current design methods, and reduce the level of expertise required to develop new devices, the framework has been implemented in a new design tool called popupCAD, which is suited for the design and development of complex folded laminate devices. We conclude with a demonstration of utility of the tools by creating a folded leg mechanism. (paper)

  4. Manufacturing experience and perspectives of WWER nuclear fuel development

    International Nuclear Information System (INIS)

    Aksenov, P.; Kolosovskiy, V.

    2011-01-01

    The purposes of new shroudless working fuel assembly (PK-3) development, basic design peculiarities of working fuel assembly (PK-3) and the results of PK-3 implementation are presented in this paper. Values of 440.19.000-02 working fuel assembly with debris filter Burnup at Kola NPP unit 2 are given. The main issues settled in the course of TVSA-T implementation like: The development of the design and fabrication method of mixing grids; The development of the design and fabrication method of basic assemblies and components of TVSA-T, including fuel rods of new generation; and The obtainment of specified pellet microstructure with average grain size more than 25μm are listed. The development of the design and fabrication method of removable uprated headpiece of shortened length as well as the development of the design and fabrication method of a tailpiece equipped with a debris filter are also illustrated

  5. Applying a Knowledge Management Modeling Tool for Manufacturing Vision (MV) Development

    DEFF Research Database (Denmark)

    Wang, Chengbo; Luxhøj, James T.; Johansen, John

    2004-01-01

    This paper introduces an empirical application of an experimental model for knowledge management within an organization, namely a case-based reasoning model for manufacturing vision development (CBRM). The model integrates the development process of manufacturing vision with the methodology of case......-based reasoning. This paper briefly describes the model's theoretical fundamentals and its conceptual structure; conducts a detailed introduction of the critical elements within the model; exhibits a real world application of the model; and summarizes the review of the model through academia and practice. Finds...... that the CBRM is supportive to the decision-making process of applying and augmenting organizational knowledge. It provides a new angle to tackle strategic management issues within the manufacturing system of a business operation. Explores a new proposition within strategic manufacturing management by enriching...

  6. Impacts of Global Manufacturing Trends on Port Development: The Case of Hong Kong1

    Directory of Open Access Journals (Sweden)

    Abraham Zhang

    2015-03-01

    Full Text Available Global manufacturing trends may have profound implications for regional port development. This paper studies Hong Kong port (HKP, which has been one of the world's busiest container ports since the 1990s. In recent years, global manufacturers have started to move away from its primary cargo base, the Chinese Pearl River Delta. This study investigates impacts of the emerging global manufacturing trends on HKP development. It is found that relocation of manufacturing to Western Guangdong benefits HKP, while other relocation destinations make HKP less attractive or even irrelevant. Based on the findings, government policies are discussed that may be formulated to support the growth of the port and wider port-related economy.

  7. Prototype development of educational program for production manager leading new perspectives on manufacturing technology

    OpenAIRE

    Ishii, Kazuyoshi; Ikeda, Hiroshi; Tsuchiya, Akinori; Shikida, Asami; Abe, Takehiko

    2006-01-01

    In this paper proposes the basic concept of an educational system and shows the result of educational program developed for manufacturing manager in leadership roles who wish to create new values in manufacturing technology. The basic concept combines an intelligent knowledge-based approach with the kaizen activity program in a framework of new value creation and comparative advantage models based on the ABC-G network (Academia, Business, Consultants, and Governmental officers). The education...

  8. Future directions for the development of Virtual Reality within an automotive manufacturer

    OpenAIRE

    Lawson, Glyn; Salanitri, Davide; Waterfield, Brian

    2016-01-01

    Virtual Reality (VR) can reduce time and costs, and lead to increases in quality, in the development of a product. Given the pressure on car companies to reduce time-to-market and to continually improve quality, the automotive industry has championed the use of VR across a number of applications, including design, manufacturing, and training. This paper describes interviews with 11 engineers and employees of allied disciplines from an automotive manufacturer about their current physical and ...

  9. Development of Urban Driving Cycle with GPS Data Post Processing

    Directory of Open Access Journals (Sweden)

    Peter Lipar

    2016-08-01

    Full Text Available This paper presents GIS-based methodology for urban area driving cycle construction. The approach reaches beyond the frames of usual driving cycle development methods and takes into account another perspective of data collection. Rather than planning data collection, the approach is based on available in-vehicle measurement data post processing using Geographic Information Systems to manipulate the excessive database and extract only the representative and geographically limited individual trip data. With such data post processing the data was carefully adjusted to include only the data that describe representative driving in Ljubljana urban area. The selected method for the driving cycle development is based on searching for the best microtrips combination while minimizing the difference between two vectors; one based on generated cycle and the other on the database. Accounting for a large random sample of actual trip data, our approach enables more representative area-specific driving cycle development than the previously used techniques.

  10. Water and Urban Development. Zapopan Jal. MÉXICO

    Science.gov (United States)

    Flores, R. M., Sr.; Rosas-Elguera, J.; Pena, L. E.; Lucia, G. I.

    2016-12-01

    Recently there is a need to make a land management project for the metropolitan area of Guadalajara (GDL), the objective is the momentum of an "orderly growth" however there are a number of problems associated with urban growth, one of which is the provision of Water. There is not an adequate exploration of our resources, nor an adequate record of the minimum parameters that can be measured in the case of groundwater, such as the level of infiltration and extraction volume. The extraction is carried out in the northwest of the GDL (currently the area is more urban development), is approximately greater than 658 l / s (SIAPA 2016), beyond the capacity of natural recharge since precipitation of an average of 850 mm. Besides which currently anthropically waterproof. There is a record of more than 40 existing in this sector of the GDL wells, wells and springs are not accounted for, the production areas varies from 14.45 to 180.55 m depth In the study area (approximately 80km2), there are urban uses, industries, airports, agricultural areas in transition to residential areas and a protected natural area. cracks have already appeared in different years and places, some authors propose that are associated with geological structures and others say it is by massive extraction of water. Mitigation measures or water injection wells to recharge aquifers is poor, not considered as a priority for the territorial urban planning element. Which leads to a significant lowering of the aquifers that is up to 67.2 m in a span of two years in some cases. Some urban developments with golf course, contribute significantly to the purification of waste water and recharge of aquifers for irrigation they do, what should force by the state or municipality to issue a series of fiscal stimulus.

  11. A Review of Agile and Lean Manufacturing as Issues in Selected International and National Research and Development Programs and Roadmaps

    Science.gov (United States)

    Castro, Helio; Putnik, Goran D.; Shah, Vaibhav

    2012-01-01

    Purpose: The aim of this paper is to analyze international and national research and development (R&D) programs and roadmaps for the manufacturing sector, presenting how agile and lean manufacturing models are addressed in these programs. Design/methodology/approach: In this review, several manufacturing research and development programs and…

  12. Developing green infrastructure design guidelines for urban climate adaptation

    NARCIS (Netherlands)

    Klemm, Wiebke; Lenzholzer, Sanda; Brink, van den Adri

    2017-01-01

    In the context of global warming and increasing urban climate problems, urban green spaces and elements have been recognized as a strategy for urban climate adaptation. Yet, despite increasing scientific evidence of the positive impacts that urban green infrastructure (UGI) is having on the urban

  13. DEVELOPMENT OF LOW-COST MANUFACTURING PROCESSES FOR PLANAR, MULTILAYER SOLID OXIDE FUEL CELL ELEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Scott Swartz; Matthew Seabaugh; William Dawson; Harlan Anderson; Tim Armstrong; Michael Cobb; Kirby Meacham; James Stephan; Russell Bennett; Bob Remick; Chuck Sishtla; Scott Barnett; John Lannutti

    2004-06-12

    This report summarizes the results of a four-year project, entitled, ''Low-Cost Manufacturing Of Multilayer Ceramic Fuel Cells'', jointly funded by the U.S. Department of Energy, the State of Ohio, and by project participants. The project was led by NexTech Materials, Ltd., with subcontracting support provided by University of Missouri-Rolla, Michael A. Cobb & Co., Advanced Materials Technologies, Inc., Edison Materials Technology Center, Gas Technology Institute, Northwestern University, and The Ohio State University. Oak Ridge National Laboratory, though not formally a subcontractor on the program, supported the effort with separate DOE funding. The objective of the program was to develop advanced manufacturing technologies for making solid oxide fuel cell components that are more economical and reliable for a variety of applications. The program was carried out in three phases. In the Phase I effort, several manufacturing approaches were considered and subjected to detailed assessments of manufacturability and development risk. Estimated manufacturing costs for 5-kW stacks were in the range of $139/kW to $179/kW. The risk assessment identified a number of technical issues that would need to be considered during development. Phase II development work focused on development of planar solid oxide fuel cell elements, using a number of ceramic manufacturing methods, including tape casting, colloidal-spray deposition, screen printing, spin-coating, and sintering. Several processes were successfully established for fabrication of anode-supported, thin-film electrolyte cells, with performance levels at or near the state-of-the-art. The work in Phase III involved scale-up of cell manufacturing methods, development of non-destructive evaluation methods, and comprehensive electrical and electrochemical testing of solid oxide fuel cell materials and components.

  14. The Rapid Urban Growth Triad: A New Conceptual Framework for Examining the Urban Transition in Developing Countries

    Directory of Open Access Journals (Sweden)

    Kyle Farrell

    2017-08-01

    Full Text Available Although the urban transition is a universal event that unfolds in all countries, the determinants, patterns, and outcomes do not necessarily follow a uniform process. With the urban transition being basically completed in developed countries around the turn of the 21st century, the growth of cities today is almost entirely confined to developing countries. Still, much of our conceptual understanding of this process is derived from earlier accounts, with definitions rooted in a historical context. This has resulted in common misconceptions such as a tendency to view the growth of cities primarily as an outcome of rural to urban migration, neglecting the growing contributions of urban natural population increase and reclassification of rural areas. A tendency to treat the components of urban growth in isolation has created a rift within the urban studies discourse, preventing any real theorization of their combined impacts and the interplay among them. Applying a systems thinking approach, this paper introduces a multidisciplinary framework for conceptualizing rapid urban growth in developing countries. The framework offers explanatory power to previously neglected components of urban growth and serves as a diagnostic for examining the urban transition—ultimately revealing new policy levers for managing it in a sustainable way.

  15. 24 CFR 3288.305 - Consultation with the Manufactured Housing Consensus Committee.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Consultation with the Manufactured Housing Consensus Committee. 3288.305 Section 3288.305 Housing and Urban Development Regulations Relating... Housing Consensus Committee. HUD will seek input from the MHCC when revising the HUD Manufactured Home...

  16. 24 CFR 3282.53 - Service of process on foreign manufacturers and importers.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Service of process on foreign manufacturers and importers. 3282.53 Section 3282.53 Housing and Urban Development Regulations Relating to... REGULATIONS Formal Procedures § 3282.53 Service of process on foreign manufacturers and importers. The...

  17. Raising Awareness of Urban Environment Development in Primary Schools

    Directory of Open Access Journals (Sweden)

    Rosi Maja

    2016-12-01

    Full Text Available In the past few years, excessive efforts have been made to increase the city’s attractiveness and its international positioning. Also studies on the so-called city destination branding are on the rise. Theorists, as Ramirez (2001, Marzano and Scott (2009, among many others, are discussing different aspects of this complex process. Many approaches and strategies are dealing with the positioning of urban environments and city destinations, trying to provide at least some partial answers about achieving this objective. With proper marketing and branding, cities can do a lot to attract tourists and visitors. For successful city marketing and branding and for the successful long-term positioning of the destination in general, it is necessary to involve the key stakeholders and collaborate with as many as possible despite the fact that the branding of a city destination (or any destination for that matter is a complex process. It is significant that all the stakeholders, who are always carriers of different interests, are invited to collaborate in the planning of the tourism development and tourism development strategies, from the government, the private sector, schools etc. It is also important to involve the citizens, who can provide a valuable opinion about the environment they live in – what they like about their environment, what suggestion would they give to tourists about gastronomy, attractions, shops, events, etc. It is significant that citizens are proud of their urban environment, that they know their own environment, and that they have the motivation for the involvement in the process of improvement of their home environment (through projects, discussions, etc.. It is impossible to create attractive urban environments or cities if residents do not have a positive opinion about the place they live in. That is why it is essential for the education institutions at all levels, but especially for the institutions at the primary levels to

  18. The influence of urban development and social mobility on socioeconomic level: The application of GIS on urban ecosystems

    Science.gov (United States)

    Suhaili Mansor, Nur; Zulhaidi Mohd Shafri, Helmi; Mansor, Shattri; Paradhan, Biswajeet

    2014-06-01

    Specifically, the integration between social sciences and natural science are fundamental in our understanding of the economic, social and technological transformations that have drastically changed the society. This study will be based on the municipality of Sungai Petani, Kedah as it has been most influenced by urbanization and urban development. Urban development in Sungai Petani is closely associated with a tremendous increase in demand for land, which is highly related to population growth, human movement and their social mobility. The qualitative case study taken will rely on the visual interpretation technique that would allow the researcher to develop a map of urban changes detection. The potential application of GIS information to estimate socioeconomic indicators and the modelling of socio-economic activities that are explored in this study is hoped to increase further our understanding of the impacts of development and urbanization on social life.

  19. The influence of urban development and social mobility on socioeconomic level: The application of GIS on urban ecosystems

    International Nuclear Information System (INIS)

    Mansor, Nur Suhaili; Shafri, Helmi Zulhaidi Mohd; Mansor, Shattri; Paradhan, Biswajeet

    2014-01-01

    Specifically, the integration between social sciences and natural science are fundamental in our understanding of the economic, social and technological transformations that have drastically changed the society. This study will be based on the municipality of Sungai Petani, Kedah as it has been most influenced by urbanization and urban development. Urban development in Sungai Petani is closely associated with a tremendous increase in demand for land, which is highly related to population growth, human movement and their social mobility. The qualitative case study taken will rely on the visual interpretation technique that would allow the researcher to develop a map of urban changes detection. The potential application of GIS information to estimate socioeconomic indicators and the modelling of socio-economic activities that are explored in this study is hoped to increase further our understanding of the impacts of development and urbanization on social life

  20. Economic reform, energy, and development: the case of Mexican manufacturing

    International Nuclear Information System (INIS)

    Aguayo, Francisco; Gallagher, K.P.

    2005-01-01

    Given increasing concern over global climate change and national security there is a burgeoning interest in examining the relationship between economic growth and energy use in developed and developing countries. More specifically, decoupling energy use per unit of gross domestic product (GDP) has fast come to be seen as in the interests of national economies and the world as a whole. Recent attention has been paid to the dramatic decreases in the energy intensity of the Chinese economy, which fell by 55% between 1975 and 1995. Do other developing economies follow similar trajectories? This paper examines the energy intensity of the Mexican economy for the period 1988-1998. Although the long-term trend in Mexican energy intensity is rising, the energy intensity of the Mexican economy began to decline in 1988. This paper explores the factors that have contributed to this reduction. Diminishing Mexican energy use per unit of GDP has been driven by significant decreases in industrial energy intensity. We show that these changes have resulted from changes in the composition of Mexican industrial structure, and technological change

  1. Development of a virtual metrology for high-mix TFT-LCD manufacturing processes

    International Nuclear Information System (INIS)

    Chen Shan; Pan Tianhong; Jang Shishang

    2010-01-01

    Nowadays, TFT-LCD manufacturing has become a very complex process, in which many different products being manufactured with many different tools. The ability to predict the quality of product in such a high-mix system is critical to developing and maintaining a high yield. In this paper, a statistical method is proposed for building a virtual metrology model from a number of products using a high-mix manufacturing process. Stepwise regression is used to select 'key variables' that really affect the quality of the products. Multivariate analysis of covariance is also proposed for simultaneously applying the selected variables and product effect. This framework provides a systematic method of building a processing quality prediction system for a high-mix manufacturing process. The experimental results show that the proposed quality prognostic system can not only estimate the critical dimension accurately but also detect potentially faulty glasses.

  2. Manufacture of Third-Generation Lentivirus for Preclinical Use, with Process Development Considerations for Translation to Good Manufacturing Practice.

    Science.gov (United States)

    Gándara, Carolina; Affleck, Valerie; Stoll, Elizabeth Ann

    2018-02-01

    Lentiviral vectors are used in laboratories around the world for in vivo and ex vivo delivery of gene therapies, and increasingly clinical investigation as well as preclinical applications. The third-generation lentiviral vector system has many advantages, including high packaging capacity, stable gene expression in both dividing and post-mitotic cells, and low immunogenicity in the recipient organism. Yet, the manufacture of these vectors is challenging, especially at high titers required for direct use in vivo, and further challenges are presented by the process of translating preclinical gene therapies toward manufacture of products for clinical investigation. The goals of this paper are to report the protocol for manufacturing high-titer third-generation lentivirus for preclinical testing and to provide detailed information on considerations for translating preclinical viral vector manufacture toward scaled-up platforms and processes in order to make gene therapies under Good Manufacturing Practice that are suitable for clinical trials.

  3. Urban Maglev Technology Development Program : Colorado Maglev Project : part 1 : executive summary of final report

    Science.gov (United States)

    2004-06-01

    The overall objective of the urban maglev transit technology development program is to develop magnetic levitation technology that is a cost effective, reliable, and environmentally sound transit option for urban mass transportation in the United Sta...

  4. Urban Maglev Technology Development Program : Colorado Maglev Project : part 2 final report

    Science.gov (United States)

    2004-06-01

    The overall objective of the urban maglev transit technology development program is to develop magnetic levitation technology that is a cost effective, reliable, and environmentally sound transit option for urban mass transportation in the United Sta...

  5. Sustainable urban development in Brisbane City--the Holy Grail?

    Science.gov (United States)

    Rahman, K; Weber, T

    2003-01-01

    Impacts from urban stormwater runoff on receiving environments have been well documented, particularly through specific regional scientific studies. Using various local government planning and management elements, urban developments in Brisbane City are now able to address stormwater management in an increasingly holistic context. One key initiative includes facilitating Water Sensitive Urban Design (WSUD) components within an Integrated Water Management Strategy that looks at policy formation, planning strategies, design option, community marketing and acceptance, maintenance programs and finally evaluation of various WSUD approaches. These can include the use of Natural Channel Designs, grassed swales, bio-filtration systems, porous pavements and roofwater tanks in several economic combinations. By linking with the Cooperative Research Centre for Catchment Hydrology, Brisbane City Council has influenced the design of WSUD planning tools and benefited the city with academic inputs into extensive evaluation programs. As well, it has also contributed to the Cooperative Research Centre's research outcomes. These evaluation programs are increasingly providing better understanding of various stormwater quality best management practices throughout Australia. As part of the overall implementation process, active involvement by a range of stakeholders has been crucial. These stakeholders have included internal planning, development assessment and design staff, external consultants, developers, and other local and state government agencies. The latter two groups are assisting in the important task of "regionalisation" of Brisbane City Council's policies and guidelines. Implementation of WSUD initiatives and stormwater re-use strategies under Council's new "Integrated Water Management" agenda are showing some excellent results, suggesting that sustainable urban development is no longer like the search for the Holy Grail.

  6. The Greenness of Cities: Carbon Dioxide Emissions and Urban Development

    OpenAIRE

    Glaeser, Edward L.; Kahn, Matthew E.

    2008-01-01

    Carbon dioxide emissions may create significant social harm because of global warming, yet American urban development tends to be in low density areas with very hot summers. In this paper, we attempt to quantify the carbon dioxide emissions associated with new construction in different locations across the country. We look at emissions from driving, public transit, home heating, and household electricity usage. We find that the lowest emissions areas are generally in California and that the h...

  7. Manufacturing of cells and stacks for SOFC development, test and demonstration projects and SOFC hotbox design development

    Energy Technology Data Exchange (ETDEWEB)

    2008-09-15

    The purpose of this project is to support the continued SOFC development through manufacturing process optimization and manufacturing of SOFC cells and stacks. These cells and stacks will serve as a necessary base for the development activities and for the establishment of a number of test and demonstration activities. The manufacture will also help provide operating experience and reduce manufacturing cost. Another main focus of the manufacturing is to assure technical improvements and reliability. It is imperative to the eventual success of the technology that test and demonstration is carried out in the pre-market conditions that will exist for the next years in the three market segments targeted by TOFC (Distributed generation, micro CHP and APU incl. marine APU). Finally, the project also includes development activities focusing on the stack-system interface (hotbox design development) and on dealing with transients and start up and shut down times, which is of particular importance for APU and micro CHP applications. Three topics are addressed:1) Cell manufacture, including production development, capacity lift and manuf. of cells for test and demonstration; 2) Stack manufacture and test, including a test facility, stack manuf. and test of stacks in a system at HCV; 3) Hotbox design development, including design, prototype construction and testing. The progress of this project is documented. Major achievements are successful manufacture of adequate amounts of cells and stacks according to the application. Furthermore significant over-performance in design, construction and test of a methanol based hotbox prototype as well as publication of this. (au)

  8. Man-machine interface: Description of recent developments by manufacturers

    International Nuclear Information System (INIS)

    Hessler, C.

    1995-01-01

    Two examples have been chosen (Staudinger NPP, unit 5, and Chooz B NPP) for illustrating characteristic features of screen-based control rooms in operation. Future development trends are: harmonisation and standardisation of hardware and software; integration of process control and operation control functions; novel visualisation concepts. The most visible progress in hardware development for future screen-based control rooms is the large-size screens for control rooms in addition to the smaller PC screens, which offer to the entire control room crew a full-scale view of plant behaviour at a glance. The next, logical advancements to come are for improved visualisation, as e.g. dynamic, coloured display of plant systems, or more abstract schematic, dynamic display of flowsheets of media and signals for information of operators, enhanced by pop-up video pictures of systems if requested. Integration of electronic operator manuals is realised to some extent and is continued, giving guidance on incident analysis supported by on-screen display, for accident management in NPP. The above tools will be installed in the control room of the EPR. The concept is to install redundant information tools, the system for every operator at the workplace, and a large-size system showing the entire plant systems for common information and coordination of operator response. Common-mode failures are planned to be prevented by complementary systems of a higher safety-engineering class. (orig./HP) [de

  9. Development of vitrification line technology and the manufacture of equipment

    International Nuclear Information System (INIS)

    Alexa, J.

    1989-01-01

    The development is described of technology and the production of equipment for the vitrification of liquid radioactive wastes. For vitrification, frit Frita F270 is used containing up to 20% titanium and featuring a corrosion effect lower by one order than that of lead glass. The liquid waste is discharged in a measuring tank where it is mixed with formic acid. It is then pumped into an evaporator. Breed vapor is carried via a condenser to a condensate tank. The evaporator concentrate is transported to a homogenizer where it is gradually mixed with Frita. The viscous mush thus produced is carried into a furnace where the remaining water is evaporated. The furnace decontamination factor is 10 2 to 10 3 . At a temperature of up to 1,050 degC the frit melts and is discharged into a case. Currently, technology has been developed of mush preparation and the design has been completed of a vitrification furnace featuring remote lid opening and closing, and of equipment for processing furnace emissions. (J.B.). 3 figs., 1 tab., 1 ref

  10. Development of Smart Active Layer Sensor (II): Manufacturing and Application

    International Nuclear Information System (INIS)

    Lee, Young Sup; Lee, Sang Il; Kwon, Jae Hwa; Yoon, Dong Jin

    2004-01-01

    This paper is the second part of the study on the development of a smart active layer (SAL) sensor, which consists of two parts. As mentioned in the first paper, structural health monitoring (SHM) is a new technology that is being increasingly applied at the industrial field as a potential approach to improve cost and convenience of structural inspection. Recently, the development of smart sensor is very active for real application. This study has focused on preparation and application study of SAL sensor which is described with regard to the theory and concept of the SAL sensor in the first paper. In order to detect elastic wave, smart piezoelectric sensor, SAL, is fabricated by using a piezoelectric element, shielding layer and protection layer. This protection layer plays an important role in a patched network of distributed piezoelectric sensor and shielding treatment. Four types of SAL sensor are designed/prepared/tested, and these details will be discussed in the paper In this study, SAL sensor ran be feasibly applied to perform structural health monitoring and to detect damage sources which result in elastic waves

  11. Towards socially and economically sustainable urban developments : impacts of toll pricing on residential developments.

    Science.gov (United States)

    2013-12-01

    The goal of this research is to investigate the effects of road pricing on residential land use choices and to : help select pricing policies that foster socially and economically sustainable residential development in : urbanized residential areas. ...

  12. Developing a tool for the preparation of GMP audit of pharmaceutical contract manufacturer.

    Science.gov (United States)

    Linna, Anu; Korhonen, Mirka; Mannermaa, Jukka-Pekka; Airaksinen, Marja; Juppo, Anne Mari

    2008-06-01

    Outsourcing is rapidly growing in the pharmaceutical industry. When the manufacturing activities are outsourced, control of the product's quality has to be maintained. One way to confirm contract manufacturer's GMP (Good Manufacturing Practice) compliance is auditing. Audits can be supported for instance by using GMP questionnaires. The objective of this study was to develop a tool for the audit preparation of pharmaceutical contract manufacturers and to validate its contents by using Delphi method. At this phase of the study the tool was developed for non-sterile finished product contract manufacturers. A modified Delphi method was used with expert panel consisting of 14 experts from pharmaceutical industry, authorities and university. The content validity of the developed tool was assessed by a Delphi questionnaire round. The response rate in Delphi questionnaire round was 86%. The tool consisted of 103 quality items, from which 90 (87%) achieved the pre-defined agreement rate level (75%). Thirteen quality items which did not achieve the pre-defined agreement rate were excluded from the tool. The expert panel suggested only minor changes to the tool. The results show that the content validity of the developed audit preparation tool was good.

  13. The Relationship of Financial Development, Urbanization and Urban-Rural Income Gap: An Empirical Research Based on Provincial Panel Data in China

    Directory of Open Access Journals (Sweden)

    Shaowei Chen

    2014-04-01

    Full Text Available Financial development and the urbanization are important influence factors of the urban-rural income gap, and financial development can be measured by three main indexes which are financial scale, financial activities and financial efficiency. The financial development scale of China has obviously widened the urban-rural income gap. But rural financial activities have obvious effect on increasing farmers’ income, and the improvement of financial efficiency is helpful for narrowing the urban-rural income gap. The Kuznets effect between economic development and the urban-rural income gap has regional diversity. Besides that, the improvement of urbanization is also helpful for shorting the urban-rural income gap.

  14. Jute: A Different Story about the Development of Manufacturing Industry and Trade between Britain and India.

    Science.gov (United States)

    Geyer, Patricia

    1997-01-01

    Examines the process used to develop a lesson plan from an academic research article. Includes a lesson plan developed from an article in the Spring 1997 issue of "The Journal of World History" tracing the history of jute (a substitute for flax) manufacturing in colonial India. (MJP)

  15. Production software that works a guide to the concurrent development of realtime manufacturing systems

    CERN Document Server

    Courtright, Ann; Behuniak, John

    1991-01-01

    This useful reference addresses the key tasks that are integral to realtime software development in manufacturing plants: managing the design of the system, setting up and coordinating a development organization, and implementing tools for successfulcompletion and management. Both new and experienced project managers will discover how to use concurrent methodologies to create realtime systems in half the time it usually takes.

  16. An Integrated Environment for Batch Process Development - From Recipe to Manufacture

    DEFF Research Database (Denmark)

    Batch process development involves the process of converting a chemical synthesis into an optimum, safe, robust, and economical process for manufacturing the chemical of desired quality at the ultimate desired scale. In this paper we describe a strategy for developing a set of integrated decision...

  17. Multi-scaling allometric analysis for urban and regional development

    Science.gov (United States)

    Chen, Yanguang

    2017-01-01

    The concept of allometric growth is based on scaling relations, and it has been applied to urban and regional analysis for a long time. However, most allometric analyses were devoted to the single proportional relation between two elements of a geographical system. Few researches focus on the allometric scaling of multielements. In this paper, a process of multiscaling allometric analysis is developed for the studies on spatio-temporal evolution of complex systems. By means of linear algebra, general system theory, and by analogy with the analytical hierarchy process, the concepts of allometric growth can be integrated with the ideas from fractal dimension. Thus a new methodology of geo-spatial analysis and the related theoretical models emerge. Based on the least squares regression and matrix operations, a simple algorithm is proposed to solve the multiscaling allometric equation. Applying the analytical method of multielement allometry to Chinese cities and regions yields satisfying results. A conclusion is reached that the multiscaling allometric analysis can be employed to make a comprehensive evaluation for the relative levels of urban and regional development, and explain spatial heterogeneity. The notion of multiscaling allometry may enrich the current theory and methodology of spatial analyses of urban and regional evolution.

  18. Developing Policy for Urban Autonomous Vehicles: Impact on Congestion

    Directory of Open Access Journals (Sweden)

    David Metz

    2018-04-01

    Full Text Available An important problem for surface transport is road traffic congestion, which is ubiquitous and difficult to mitigate. Accordingly, a question for policymakers is the possible impact on congestion of autonomous vehicles. It seems likely that the main impact of vehicle automation will not be seen until driverless vehicles are sufficiently safe for use amid general traffic on urban streets. Shared use driverless vehicles could reduce the cost of taxis and a wider range of public transport vehicles could be economic. Individually owned autonomous vehicles would have the ability to travel unoccupied and may need to be regulated where this might add to congestion. It is possible that autonomous vehicles could provide mobility services at lower cost and wider scope, such that private car use in urban areas could decline and congestion reduce. City authorities should be alert to these possibilities in developing transport policy.

  19. Electricity (in)accessibility to the urban poor in developing countries

    DEFF Research Database (Denmark)

    Singh, Rozita; Wang, Xiao; Mendoza, Juan Carlos

    2015-01-01

    More than half of the world’s population now lives in urban areas. The difficulties involved in providing new urban residents with a wide variety of services reveals a new face of poverty, one in which urban communities cannot access or afford basic modern energy services for their development...... and empowerment. As an enabler of development processes, access to electricity in urban and peri-urban contexts plays a key role in providing possibilities and solutions to the urban poor. Energy poverty is no longer a rural-only phenomenon, and a concerted effort is needed to find solutions. Taking...... this into account, the Global Network on Energy for Sustainable Development (GNESD) initiated the Urban Peri-Urban Energy Access (UPEA) project in 2006. The objective was to understand the barriers to energy access in the context of the urban poor in seven countries. Barriers from both the supply and demand sides...

  20. Development of a novel cold forging process to manufacture eccentric shafts

    Science.gov (United States)

    Pasler, Lukas; Liewald, Mathias

    2018-05-01

    Since the commercial usage of compact combustion engines, eccentric shafts have been used to transform translational into rotational motion. Over the years, several processes to manufacture these eccentric shafts or crankshafts have been developed. Especially for single-cylinder engines manufactured in small quantities, built crankshafts disclose advantages regarding tooling costs and performance. Those manufacturing processes do have one thing in common: They are all executed at elevated temperatures to enable the material to be formed to high forming degree. In this paper, a newly developed cold forging process is presented, which combines lateral extrusion and shifting for manufacturing a crank in one forming operation at room temperature. In comparison to the established upsetting and shifting methods to manufacture such components, the tool cavity or crank web thickness remains constant. Therefore, the developed new process presented in this paper consists of a combination of shifting and extrusion of the billet, which allows pushing material into the forming zone during shifting. In order to reduce the tensile stresses induced by the shifting process, compressive stresses are superimposed. It is expected that the process limits will be expanded regarding the horizontal displacement and form filling. In the following report, the simulation and design of the tooling concept are presented. Experiments were conducted and compared with corresponding simulation results afterwards.

  1. Achiving sustainability in urban transport in developing and transition countries

    Energy Technology Data Exchange (ETDEWEB)

    Braeuninger, Michael; Schulze, Sven; Leschus, Leon [Hamburg Institute of International Economics (HWWI), Hamburg (Germany); Perschon, Juergen; Hertel, Christof; Field, Simon; Foletta, Nicole [European Institute for Sustainable Transport (EURIST), Hamburg (Germany)

    2012-01-15

    Sustainable transport is an urging issue on a few accounts: The transport sector was responsible for 23% global CO{sub 2} emission in 2007. It also has a number of other effects like air and noise pollution, land use etc. These effects are especially relevant in cities, where already half of the world's population is living today. With a growing world population and ongoing urbanisation the number and share of city dwellers will rise considerably in the next decades. Thus, sustainability in urban transport becomes increasingly important. This report first provides a short overview of the most important data behind the sustainability problems in urban transport. Then the question is addressed, what sustainable mobility is and where the main obstacles are on the path to more sustainability. The central part of the study deals with the most important policies and instruments enhancing sustainable (urban) mobility. The main feature of each section within that part of the study is the combination of theoretical background information and arguments with case studies from developing and transition countries. Accordingly, the reader gets an idea of the vast range of available instruments in order to promote sustainable mobility. But it is also shown that it is not only necessary but also possible to introduce or enhance sustainable urban transport regardless of the income position of the specific region, country or city. Besides, success factors for different instruments are identified, thereby deriving promising routes for countries or a group of countries according to their state of economic development. (orig.)

  2. From e-manufacturing to Internet Product Process Development (IPPD) through remote – labs

    International Nuclear Information System (INIS)

    Nieto, Ernesto Córdoba; Parra, Paulo Andres Cifuentes; Díaz, Juan Camilo Parra

    2014-01-01

    This paper presents the research developed at Universidad Nacional de Colombia about the e-Manufacturing platform that is being developed and implemented at LabFabEx (acronym in Spanish as L aboratorio Fabrica Experimental ) . This platform besides has an approach to virtual-remote labs that have been tested by several students and engineers of different industrial fields. At this paper it is shown the physical and communication experimental platform, the general scope and characteristics of this e-Manufacturing platform and the virtual lab approach. This research project is funded by COLCIENCIAS (Administrative Department of science, technology and innovation in Colombia) and the enterprise IMOCOM S.A

  3. A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs)

    OpenAIRE

    Elgadi, Osama; Birkett, Martin; Cheung, Wai Ming

    2015-01-01

    This paper investigates the current quality management processes in use in Libyan Manufacturing Companies (LMCs), and proposes a methodology of mixed method approach to data collection to develop a novel six sigma framework. To date, there is no evidence of the use of six sigma in the Libyan manufacturing industry, and it is found that only 58 companies in Libya currently have ISO 9001 accreditation of which only 9 are manufacturing companies. This underutilisation of manufacturing systems su...

  4. The urban development in Dubai : A descriptive analysis

    OpenAIRE

    Fazal, Fatema

    2008-01-01

      The aim of this paper is to analyse the urban development in Dubai by means of the fourquadrant model, presented by DiPasquale and Wheaton, which represents the market for real estate use and assets. The focus is on factors such as economic growth, access to oil, population growth and the incentive of the government to promote developments in Dubai, to study how they affect the real estate market. It is observed how all these factors contribute to the expansion of the construction sector an...

  5. Development of Manufacturing Technology to Accelerate Cost Reduction of Low Concentration and

    Energy Technology Data Exchange (ETDEWEB)

    Detrick, Adam [The Solaria Corporation, Fremont, CA (United States)

    2017-09-27

    The purpose of this project was to accelerate deployment of cost-effective US-based manufacturing of Solaria’s unique c-Si module technology. This effort successfully resulted in the development of US-based manufacturing technology to support two highly-differentiated, market leading product platforms. The project was initially predicated on developing Solaria’s low-concentration PV (LCPV) module technology which at the time of the award was uniquely positioned to exceed the SunShot price goal of $0.50/Wp for standard c-Si modules. The Solaria LCPV module is a 2.5x concentrator that leverages proven, high-reliability PV module materials and low silicon cell usage into a technology package that already had the lowest direct material cost and leading Levelized Cost of Electricity (LCOE). With over 25 MW commercially deployed globally, the Solaria module was well positioned to continue to lead in PV module cost reduction. Throughout the term of the contract, market conditions changed dramatically and so to did Solaria’s product offerings to support this. However, the manufacturing technology developed for the LCPV module was successfully leveraged and optimized to support two new and different product platforms. BIPV “PowerVision” and High-efficiency “PowerXT” modules. The primary barrier to enabling high-volume PV module manufacturing in the US is the high manual labor component in certain unique aspects of our manufacturing process. The funding was used to develop unique manufacturing automation which makes the manual labor components of these key processes more efficient and increase throughput. At the core of Solaria’s product offerings are its unique and proprietary techniques for dicing and re-arranging solar cells into modules with highly-differentiated characteristics that address key gaps in the c-Si market. It is these techniques that were successfully evolved and deployed into US-based manufacturing site with SunShot funding. Today, Solaria

  6. Using Urban-Carrying Capacity as a Benchmark for Sustainable Urban Development: An Empirical Study of Beijing

    Directory of Open Access Journals (Sweden)

    Yigang Wei

    2015-03-01

    Full Text Available Sustainable urban development has been receiving growing concerns from both city managers and urban residents across the world. As a yardstick of sustainability, urban carrying capacity (UCC is an important conceptual underpinning that guides local governments in promoting sustainable urban development. However, existing studies still lack consensus not only on the theoretical aspects, but also on the methodological issues for UCC monitoring and evaluation. A knowledge gap exists, which this paper fills. This study aims to develop a practical UCC assessment framework to guide urban development towards achieving sustainability. The quantitative-based assessment framework provides a set of measurable indicators and benchmarks for city managers to conduct routine monitoring on progress toward urban sustainability, and helps identify deficient areas, which urgently need resource allocation to improve UCC. Focusing on a case study of Beijing, this study demonstrates that the framework is useful in promoting urban sustainability. This framework provides rich implications for other city prototypes in China as the nation marches into the next phase of development.

  7. Urban Agglomerations in Regional Development: Theoretical, Methodological and Applied Aspects

    Directory of Open Access Journals (Sweden)

    Andrey Vladimirovich Shmidt

    2016-09-01

    Full Text Available The article focuses on the analysis of the major process of modern socio-economic development, such as the functioning of urban agglomerations. A short background of the economic literature on this phenomenon is given. There are the traditional (the concentration of urban types of activities, the grouping of urban settlements by the intensive production and labour communications and modern (cluster theories, theories of network society conceptions. Two methodological principles of studying the agglomeration are emphasized: the principle of the unity of the spatial concentration of economic activity and the principle of compact living of the population. The positive and negative effects of agglomeration in the economic and social spheres are studied. Therefore, it is concluded that the agglomeration is helpful in the case when it brings the agglomerative economy (the positive benefits from it exceed the additional costs. A methodology for examination the urban agglomeration and its role in the regional development is offered. The approbation of this methodology on the example of Chelyabinsk and Chelyabinsk region has allowed to carry out the comparative analysis of the regional centre and the whole region by the main socio-economic indexes under static and dynamic conditions, to draw the conclusions on a position of the city and the region based on such socio-economic indexes as an average monthly nominal accrued wage, the cost of fixed assets, the investments into fixed capital, new housing supply, a retail turnover, the volume of self-produced shipped goods, the works and services performed in the region. In the study, the analysis of a launching site of the Chelyabinsk agglomeration is carried out. It has revealed the following main characteristics of the core of the agglomeration in Chelyabinsk (structure feature, population, level of centralization of the core as well as the Chelyabinsk agglomeration in general (coefficient of agglomeration

  8. Development of manufacturing technology and fabrication of prototype for main coolant pump

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Koon Seok; Han, C.K.; Chei, J.M.; Chung, K.S.; Youn, M.H.; Shin, S.A.; Choi, D.J.; Kim, H.C. [HALLA Industrial Co., Ltd., Pusan (Korea)

    1999-03-01

    This study presents the development of the manufacturing technology for the Main Coolant Pump of the SMART. This report contains the followings; (1) Select axial type pump for the MCP (2) MCP is drived by squirrel-cage induction motor that consisted canned motor type. (3) MCP shaft has three horizontal and one vertical support bearings. (4) Design of several part of the MCP (5) Manufacturing of the performance test motor (6) Design and manufacturing of the speed sensor (7) Procedures for three-axial and five-axial M.C.T., Tig welding and Electron Beam Welding were developed. (8) Conceptional design of the MCP test facility for the performance test under operating conditions. (9) Results of standard weld test specimens according to the ASME section IX. (author). 21 refs., 35 figs., 10 tabs.

  9. Development of optimum manufacturing technologies of radial plates for the ITER toroidal field coils

    International Nuclear Information System (INIS)

    Nakajima, H.; Hamada, K.; Okuno, K.; Abe, K.; Shimizu, T.; Kakui, H.; Yamaoka, H.; Maruyama, N.; Takayanagi, T.

    2007-01-01

    Japan Atomic Energy Agency is studying rational manufacturing method and developing the optimum manufacturing technologies of the radial plates used in the toroidal field coils for the International Thermonuclear Experimental Reactor (ITER) in collaboration with the Japanese industries. Three sector form pieces were cut by plasma cutting machine from a hot rolled plate without any difficulties and one of them was machined to a 1.32-m long curved segment of the radial plate having the same size as the actual one. However, unacceptable large deformation about 5 mm flatness, which was not observed in 1-m long straight radial plate, was found after intermediate machining. Since it would be caused by groove direction against the hot rolled direction and/or curved shape of grooves, two trial manufactures of 0.4-m long straight radial plates have been performed to clarify the cause of the large deformation. Detailed investigation showed that the large deformation could be avoided if the groove direction would have been parallel to a rolling direction of the plate. Welding trials by using fiber laser technique was also performed and penetration of 15 mm could be obtained in a welding speed of 0.1 m/min at 5 kW laser power. An optimum manufacturing method has been proposed based on the development of manufacturing technologies

  10. Detecting Development Pattern of Urban Business Facilities Using Reviews Data

    Directory of Open Access Journals (Sweden)

    JIANG Botao

    2015-09-01

    Full Text Available This paper reveals and utilizes the growing power of online customer reviews in the space and time context. The location of commercial facilities and online customer reviews offered by Dianping.com provide an important data source for the study of spatial and temporal dynamics of urban commercial facilities. The constraints of road network are taken into account towards computing the density of urban commercial facilities and associated online customer reviews, as well as their spatial distribution, temporal trend, and the coupling relationship between facility number and stratification level. This paper maps the spatial distribution of commercial facilities onto the nearby road network, reflecting the influences of the locations, number and satisfaction levels of other commercial facilities across various street types. Because more and more customers tend to make a final shopping decision by sorting through search results by ratings and feedback, the research conducted in this paper can provide the proof for quantitative evaluation of urban planning on commercial facility development.

  11. Design, Development and Hotfire Testing of Monolithic Copper and Bimetallic Additively Manufactured Combustion Chambers

    Science.gov (United States)

    Gradl, Paul; Barnett, Greg; Brandsmeier, Will; Greene, Sandy Elam; Protz, Chris

    2016-01-01

    NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM) otherwise commonly referred to as additive manufacturing. The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for the GRCop-84 copper-alloy commensurate with powder bed additive manufacturing, evaluate bimetallic deposition and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. As a direct spin off of this program, NASA is working with industry partners to further develop the printing process for the GRCop-84 material in addition to the C-18150 (CuCrZr) material. To advance the process further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic additively manufactured chambers. A 1.2k sized thrust-chamber was designed and developed to compare the printing process of the GRCop-84 and C-18150 SLM materials. A series of similar MCC liners also completed development with an Inconel 625 jacket bonded to the GRcop-84 liner evaluating direct metal deposition (DMD) laser and arc-based techniques. This paper describes the design, development, manufacturing and testing of these combustion chambers and associated lessons learned throughout the design and development process.

  12. Whose urban development? Changing credibilities, forms and functions of urbanization in Chengdu, China

    DEFF Research Database (Denmark)

    Zeuthen, Jesper Willaing

    2017-01-01

    In Chengdu, as in most other Chinese mega-cities, urbanization has been very rapid over the last three decades. In the current phase of urbanization, approximately 900,000 villagers in Chengdu alone have been resettled to urban-style settlements in order to release space for new arable land and t...

  13. Planning Urban Development from an Outsider’s Perspective: Siem Reap, the Backdrop of Changing Urban Representations

    Directory of Open Access Journals (Sweden)

    Adele Esposito

    2014-11-01

    Full Text Available This article explores the internationalization of urban planning in Siem Reap, the town situated as the gateway to the Archaeological Park of Angkor. After Angkor was listed as a World Heritage Site in 1992, international donors and consultants have been involved in the management of Siem Reap Province, where the archaeological park is located. Not only have they been engaged in the conservation and the enhancement of the  archaeological heritage, but they have also planned the future development of nearby Siem Reap. Foreign consultants, coming from Europe and East Asia, have tried to determine what the best suitable models and tools for the urban development of Siem Reap should be, while tourism development and foreign investments were constantly growing. No planning proposal implemented has been completely successful but, several teams of international consultants have carried out new plans that acknowledged the evolution of the urban context. In this article, I question the representation of urban space formulated by these plans and the way they were constructed by consultants coming from different cultural backgrounds and having specific objectives. The article describes how Siem Reap’s built heritage and recent urban phenomena are perceived and analyzes how internationally shared notions and principles (e.g., the discourse of “sustainable development” influence the imagination of future urban development. Faced with the failure of this series of plans, Siem Reap appears to be the backdrop to where evolving urban imagination takes place.

  14. 2010 World Expo and Urban Life Quality in Shanghai in Terms of Sustainable Development

    Institute of Scientific and Technical Information of China (English)

    Zhu Dajian; Peter P.Rogers

    2006-01-01

    Based on sustainable development theory and the UN's Human Development Index, this thesis puts forward what the quality of urban life implies,makes a study of the world Expo's potential influences on the urban life of Shanghai and advances the strategy and measures to strengthen the life-quality-facing urban management

  15. Contemplating ‘Quality Street’ : integration of environmental quality in planning sustainable urban development

    NARCIS (Netherlands)

    van Stigt, M.

    2016-01-01

    The challenge of sustainable urban development entails integration of environmental interests in decision-making about urban plans. In practice, this is not always successful. This dissertation offers explanations and suggests some strategies for further improvement. Three different perspectives are

  16. analysis of urban poverty and its implications on development in uyo

    African Journals Online (AJOL)

    DJFLEX

    The study revealed significant relationship between factors of urban poverty and development in Uyo urban area. The study recommended the .... processes of change including economic, demographic, political, cultural, technological and ...

  17. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  18. URBAN TRANSPORT AND LOCAL GOVERNANCE IN ASIAN DEVELOPING COUNTRIES

    Directory of Open Access Journals (Sweden)

    Akira MORITA

    2004-01-01

    This paper comprises a GIS-based land use analysis on the relationship between urbanization and transport infrastructure development, b GPS-based travel behavior survey, and c interview survey on residents' satisfaction with transport infrastructures and services. It was shown that the current land use patterns largely differ depending on the existence of agricultural infrastructure development in the pre-urbanized stage. It was also confirmed by a GPS-based travel survey that travel behavior patterns in scattered development areas are significantly different from those in orderly development areas. The former areas lack not only road space but also a structured hierarchy of networks, resulting in inefficient travel behaviors with low speed and detours. The GPS survey gave clearer pictures to grasp the relationship between travel patterns of residents and their demand for the improvement of local transport services. It was indicated that local governments who are responsible for these demands often fail to meet them due to financial and institutional limitations of the current system.

  19. MANAGING PHYSICAL DEVELOPMENT IN PERI-URBAN AREAS OF KUMASI, GHANA: A CASE OF ABUAKWA

    Directory of Open Access Journals (Sweden)

    Paul Amoateng

    2013-01-01

    Full Text Available A remarkable trait of the 21 st century has been the high rate of urbanization which has characterized the growth and development of cities especially in developing countries. This situation has fuelled rapid physical development and expansion of peri-urban areas as urban dwellers relocate to cities’ peripheries. Focusing on Abuakwa a peri-urban area in Kumasi, the second largest city in Ghana, this paper assesses the nature and extent of physical development in peri-urban areas, and identifies the factors contributing to the rapid development of peri-urban areas. The paper further examines the effects of the increasing physical growth on the development of peri-urban Abuakwa. Using a case study approach, both primary and secondary sources of data were collected from decentralized government institutions of Kumasi Metropolitan Assembly (KMA and Atwima Nwabiagya District Assembly (ANDA, as well as indigenes and relocated urban dwellers in Abuakwa. The paper reveals that the outward drift has manifested itself in an increased scramble for land for residential and commercial purposes in the peri-urban area. The resultant effect has been the fast and spontaneous physical development in the urban periphery which has significantly altered the peri-urban morphology. The paper recommends the establishment of Customary Land Secretariat (CLS to co-ordinate allocation of land, and the application of settlement growth management approaches to ensure the creation of a functional city and liveable peri-urban areas.

  20. Development of casting technology for manufacturing metal rods with simulated metallic spent fuels

    International Nuclear Information System (INIS)

    Lee, D. B.; Lee, Y. S.; Woo, Y. M.; Jang, S. J.; Kim, J. D; Kim, C. K.; Shin, Y. J.; Lee, J. H.

    1999-01-01

    The advanced casting equipment based on the directional solidification method was developed for manufacturing the uranium metal rod having 13.5 mm diameter and 1,200 mm length. In order to prevent surface-shrunk holes revealed easily in course of casting the small diameter and long rods, the vacuum casting furnace has the four pre-heaters equipped with temperature controller. On the other hand, the computer simulation to estimate the defective location and to analyze the solidus behavior of molten uranium in the mold were also performed by using MAGMA Code. As a result of the experimental and theoretical study, the sound rod has successfully been manufactured

  1. Development strategy and process models for phased automation of design and digital manufacturing electronics

    Science.gov (United States)

    Korshunov, G. I.; Petrushevskaya, A. A.; Lipatnikov, V. A.; Smirnova, M. S.

    2018-03-01

    The strategy of quality of electronics insurance is represented as most important. To provide quality, the processes sequence is considered and modeled by Markov chain. The improvement is distinguished by simple database means of design for manufacturing for future step-by-step development. Phased automation of design and digital manufacturing electronics is supposed. The MatLab modelling results showed effectiveness increase. New tools and software should be more effective. The primary digital model is proposed to represent product in the processes sequence from several processes till the whole life circle.

  2. Community biomass handbook volume 4: enterprise development for integrated wood manufacturing

    Science.gov (United States)

    Eini Lowell; D.R. Becker; D. Smith; M. Kauffman; D. Bihn

    2017-01-01

    The Community Biomass Handbook Volume 4: Enterprise Development for Integrated Wood Manufacturing is a guide for creating sustainable business enterprises using small diameter logs and biomass. This fourth volume is a companion to three Community Biomass Handbook volumes: Volume 1: Thermal Wood Energy; Volume 2: Alaska, Where Woody Biomass Can Work; and Volume 3: How...

  3. Development of STEP-NC Adaptor for Advanced Web Manufacturing System

    Science.gov (United States)

    Ajay Konapala, Mr.; Koona, Ramji, Dr.

    2017-08-01

    Information systems play a key role in the modern era of Information Technology. Rapid developments in IT & global competition calls for many changes in basic CAD/CAM/CAPP/CNC manufacturing chain of operations. ‘STEP-NC’ an enhancement to STEP for operating CNC machines, creating new opportunities for collaborative, concurrent, adaptive works across the manufacturing chain of operations. Schemas and data models defined by ISO14649 in liaison with ISO10303 standards made STEP-NC file rich with feature based, rather than mere point to point information of G/M Code format. But one needs to have a suitable information system to understand and modify these files. Various STEP-NC information systems are reviewed to understand the suitability of STEP-NC for web manufacturing. Present work also deals with the development of an adaptor which imports STEP-NC file, organizes its information, allowing modifications to entity values and finally generates a new STEP-NC file to export. The system is designed and developed to work on web to avail additional benefits through the web and also to be part of a proposed ‘Web based STEP-NC manufacturing platform’ which is under development and explained as future scope.

  4. Process Development for the Design and Manufacturing of Personalizable Mouth Sticks.

    Science.gov (United States)

    Berger, Veronika M; Pölzer, Stephan; Nussbaum, Gerhard; Ernst, Waltraud; Major, Zoltan

    2017-01-01

    To increase the independence of people with reduced hand/arm functionality, a process to generate personalizable mouth sticks was developed based on the participatory design principle. In a web tool, anybody can choose the geometry and the materials of their mouth piece, stick and tip. Manufacturing techniques (e.g. 3D printing) and materials used in the process are discussed and evaluated.

  5. Creativity Enhancement in Lithuanian Furniture Manufacturing Business According to International Business Development

    Directory of Open Access Journals (Sweden)

    Rita Zybartaitė

    2014-04-01

    Full Text Available This article analyzes Lithuanian furniture manufacturing business perceptions towards creativity, and creativityenhancement behavior according to its international development. Firstly article focuses on international business development,substantiate need of creativity for international business development, outline creativity influencing factors which operateat individual, team and organizational levels and recommendations how to enhance creativity in methodical way. Secondly,article describes a problem of empirical research, methodology of used methods and instruments, and presents results of surveyresearch.

  6. THE IMPACT OF GLOBAL COMPETITION ON THE STATE OF MANUFACTURING IN UKRAINE AND DEVELOPED COUNTRIES

    Directory of Open Access Journals (Sweden)

    Kateryna Shatnenko

    2017-11-01

    Full Text Available At the end of the 20th century, the economic structure was changed fundamentally in some countries. It was mostly related to the growth of global competition. One of the consequences of this process was the decline in manufacturing production in developed countries and in the post-Soviet countries. The purpose of this article is to define the meaning and consequences of the decline in manufacturing production in developed countries and in post-Soviet countries on the example of Ukraine. Methodology. This study is based on some general theoretical approaches such as analysis and synthesis, induction and deduction, etc. Also, statistical analysis was used for discovering some economic trends. Structural analysis was helpful for examining shifts in economic structure. Correlation between different facts, which is crucial for the understanding of the transformation of manufacturing, was identified by applying the systems approach. The aim of the article is to reveal the impact of global competition on the state of manufacturing and to define the manufacturing development trend. Results of this research showed that the decline in the rate of profit causes the transformation of economic structure. Global competition made the production of some goods in developed countries less profitable due to the relatively high costs. The ability to transfer labour-intensive production to developing countries transformed economic structure in developed countries. It was the reason for a sharp decline in manufacturing production, which caused some economic and social problems. Post-Soviet countries had serious economic and social problems too. Liberalization of trade made these countries face with global competition. This competition revealed extremely weak competitive positions of a great range of products. There was a massive decline in manufacturing production in Ukraine. This study proves that the transformation of manufacturing is far from the end. First of all

  7. The development and manufacture of size for size feeder pipe for feeder replacement

    International Nuclear Information System (INIS)

    Legate, G.; Schreiter, D.; Townley, N.

    2008-01-01

    The recently recognised problem of feeder pipe thinning created a unique sourcing problem. Operators require relatively small quantities of nuclear class 1 seamless feeder pipe for such replacement which prior to the introduction of this product in 2006 was not available. It was desired that the pipe be produced at the exact size of the pipe currently in use at the specific reactor site (feeder pipe size varies from site to site). Secondly the pipe had to be made in conformance to the original code year of issue and to conform to the intent of the original material specifications. Finally a supply strategy had to be implemented allowing for timely manufacture of replacement piping. This presentation will report upon how replacement size for size feeder tube was developed and is currently manufactured at Nu-Tech Precision Metals. The paper will also detail the current supply strategy to ensure timely manufacture of the product.

  8. HOW DO DIFFERENT COORDINATION MECHANISMS BETWEEN NEW PRODUCT DEVELOPMENT AND MANUFACTURING INFLUENCE FIRM PERFORMANCE?

    DEFF Research Database (Denmark)

    Timenes Laugen, Bjørge; Acur, Nuran; Boer, Harry

    In the literature several suggestions have been put forward for tools, methods and mechanisms to coordinate new product development (NPD) and manufacturing. However, evidence of the operational performance effects of many of these approaches is at best limited. Furthermore, there is a lack...... of understanding of how various coordination mechanisms work in different contexts. Using a survey consisting of data from 677 manufacturing firms from 19 countries worldwide, we test how coordination mechanisms relate to operational performance, and how context moderates these relationships or affects performance...... between standardization and organization design, respectively, and performance are positively moderated by company size. Furthermore, innovativeness moderates the relationship between organization design and performance positively. For managers, our findings indicate that NPD-manufacturing coordination...

  9. Housing and Urban Development trends in Czech Republic

    Directory of Open Access Journals (Sweden)

    Karel Schmeidler

    2008-01-01

    Full Text Available This article describes housing trends in Czech Republic, which are determined by social, economic, technical and cultural changes of last two decades In Central Europe. Those trends have positive and also negative sides: positive can be seen the quantitative and qualitative growth of housing space, variety of architectural solutions for individualised customer. Negative aspect is urban sprawl, which together with individual automobile occupancy destroys nature, space and land values. Future development is inevitable, proper design of housing needs sensitive multidisciplinal attitude and understanding of the needs of man and nature.

  10. Cultural Development Strategies and Urban Gay Tourism Revitalization

    Directory of Open Access Journals (Sweden)

    Jose M Prat Forga

    2015-12-01

    Full Text Available Municipal governments increasingly turn to cultural and leisure activities to promote and revitalize their cities. This study analysed the development of gay tourism in Barcelona (Spain by means of music festivals. While a significant body of literature has examined revitalization strategies that focus primarily around entertainment and commerce, this paper focuses on strategies in the development of cultural and leisure activities around this specific tourism population. It presents findings from a local survey distributed to key stakeholders in the promotion and development of this tourism (local agents and gay tourists. The survey data indicate that although most agents are guided by a varied set of goals, marketing objectives (“image city” and “brand city” guide the development and support of urban gay tourism in Barcelona.

  11. Distribution of Costs and Profits in Urban Development

    DEFF Research Database (Denmark)

    Christensen, Finn Kjær; Sørensen, Michael Tophøj

    2009-01-01

    Most countries have a system - procedures and tools - for foreseeable, clear and fair distribution of costs and profits in urban development. However, the distribution of profits and costs between the municipality and the developers /landowners is in Denmark rather fragmented and not very...... transparent as the distribution is regulated throughout the whole planning and environmental regulation system. Furthermore, development agreements – an “old” tool in many countries and an efficient tool to distribute profits and costs between the public and private sector – have only recently become possible...... in Denmark, and only under some special circumstances. This paper aims to clarify how costs and profits are distributed between the municipality and the developers /landowners in Denmark. The paper analyses how the Danish planning and environmental regulation system handles this issue. Based on the analysis...

  12. Montepulciano 3D virtual models for urban planning and development of the urban environment

    Directory of Open Access Journals (Sweden)

    Stefano Bertocci

    2014-05-01

    Full Text Available The research work carried out by the Department of Architecture of Florence and the Department of Civil Engineering and Architecture of Pavia for the administration of Montepulciano (SI was aimed to study new methods of analysis and promotion of the city. The representation of the street fronts of the historic center, realized in a decade of analysis in which it is carried out the study for the planning, has formed a corpus of documents useful for the realization of a three-dimensional model of the city itself. The model, which allows a dynamic interaction with the urban structure, has been designed to develop tools for valuation of the activities and the historical and cultural heritage. It is possible through the determination of a structure of a visual interface and interactive multimedia which would transform the model in a real emotional space.

  13. Influences of Different Land Use Spatial Control Schemes on Farmland Conversion and Urban Development

    Science.gov (United States)

    Zhou, Min; Tan, Shukui; Zhang, Lu

    2015-01-01

    Land use planning is always officially implemented as an effective tool to control urban development and protect farmland. However, its impact on land use change remains untested in China. Using a case study of Hang-Jia-Hu region, the main objective of this paper was to investigate the influence of different land use spatial control schemes on farmland conversion and urban development. Comparisons of farmland conversion and urban development patterns between the urban planning area and the non-urban planning area were characterized by using remote sensing, geographical information systems, and landscape metrics. Results indicated that farmland conversion in the non-urban planning area was more intensive than that in the urban planning area, and that farmland patterns was more fragmented in the non-urban planning area. Built-up land patterns in the non-urban planning area showed a trend of aggregation, while those in the urban planning area had a dual trend of fragmentation and aggregation. Existing built-up areas had less influence on built-up land sprawl in the non-urban planning area than that in the urban planning area. Built-up land sprawl in the form of continuous development in the urban planning area led to farmland conversion; and in the non-urban planning area, built-up land sprawl in the form of leapfrogging development resulted in farmland areal declines and fragmentation. We argued that it is a basic requirement to integrate land use plans in urban and non-urban planning areas for land use planning and management. PMID:25915897

  14. Influences of different land use spatial control schemes on farmland conversion and urban development.

    Science.gov (United States)

    Zhou, Min; Tan, Shukui; Zhang, Lu

    2015-01-01

    Land use planning is always officially implemented as an effective tool to control urban development and protect farmland. However, its impact on land use change remains untested in China. Using a case study of Hang-Jia-Hu region, the main objective of this paper was to investigate the influence of different land use spatial control schemes on farmland conversion and urban development. Comparisons of farmland conversion and urban development patterns between the urban planning area and the non-urban planning area were characterized by using remote sensing, geographical information systems, and landscape metrics. Results indicated that farmland conversion in the non-urban planning area was more intensive than that in the urban planning area, and that farmland patterns was more fragmented in the non-urban planning area. Built-up land patterns in the non-urban planning area showed a trend of aggregation, while those in the urban planning area had a dual trend of fragmentation and aggregation. Existing built-up areas had less influence on built-up land sprawl in the non-urban planning area than that in the urban planning area. Built-up land sprawl in the form of continuous development in the urban planning area led to farmland conversion; and in the non-urban planning area, built-up land sprawl in the form of leapfrogging development resulted in farmland areal declines and fragmentation. We argued that it is a basic requirement to integrate land use plans in urban and non-urban planning areas for land use planning and management.

  15. Developing Research Base Learning in Urban Sociology Class

    Directory of Open Access Journals (Sweden)

    Lumban Arofah

    2015-03-01

    Full Text Available This article aims to describe an introduction research base learning in the urban sociology class. The idea came after evaluating answer sheet from previous year students. Although the student had an ability to demonstrate their understanding on the subject, but they could not be able to relate and describe the subject into the local urban case. The lecture developed the lesson plan that enable student to do a small research and will be presented in the class. The research report and participation of presentation will be counted in for final score. The project divided into 5 steps; preparation - research – presentation – discussion – summarizing. Reflecting the lesson process, there are several important points as a lesson learned; student have an ability to reflect the theories and perspective in urban sociology, understand the differences of formal migrant and informal migrant, describe the behavior of inhabitant in public sphere, analyzing survival mechanism of informal trader, and understand how urban sub culture maintain their culture and develop their group as a place of fellowships for other sub culture members.Tulisan ini bertujuan untuk menjelaskan digunakannya metode pembelajaran berbasis riset pada mata kuliah Sosiologi Perkotaan. Hal tersebut merupakan hasil dari evaluasi lembar jawaban Mahasiswa pada tes final semester pada tahun sebelumnya. Hasil tes final menunjukkan bahwa Mahasiswa mampu menjelaskan materi yang diajarkan dalam pembelajaran namun kesulitan ketika harus mengkaitkannya terhadap permasalahan lokal perkotaan. Pengajar kemudian membuat rencana pembelajaran yang memungkinkan siswa melakukan penelitian sederhana yang nantinya dipresentasikan di depan kelas. Laporan penelitian dan partisipasi dalam pembelajaran diperhitungkan sebagai komponen penilaian dalam skor akhir. Proyek tersebut dibagi kedalam lima tahapan; persiapan – penelitian lapangan – presentasi – diskusi – simpulan.  Berpijak dari pembelajaran

  16. A novel method for feasibility testing urban sustainable development policies

    Directory of Open Access Journals (Sweden)

    O’Doherty Travis

    2013-01-01

    Full Text Available Policy making to promote more sustainable development is a complex task due in part to the large number of both stakeholders and potential policies. Policy feasibility testing provides a guide to the viability and practicality of policy implementation and forms an important part of an evidence based policy making process. An extensive literature review has identified no standardized approach to feasibility testing. This paper addresses this knowledge gap by describing a novel method using Multi-Criteria Decision Analysis (MCDA for feasibility testing of policies aimed at increasing the sustainability of towns and villages in Ireland. Feasibility results are provided for 40 frequently cited policy interventions tested for 18 settlements in Ireland. Policies were selected in the arenas of transport, food, housing and urban form, energy, waste and water. Policies are feasibility tested through analysis of operational evidence from both quantitative and qualitative data sources. Following testing, policies are ranked in terms of feasibility. This research examines the effectiveness of local and national level policies and the importance of both local community involvement and central government regulation in policy success. The inter-settlement variation in feasibility testing scores prioritises policy selection and aims to reduce cherry-picking of policies to support the viewpoints of the decision maker. Although developed for an Irish urban context the methods described here may have applicability elsewhere.

  17. Urban wastewater development in Central and Eastern Europe.

    Science.gov (United States)

    Somlyódy, László; Patziger, Miklós

    2012-01-01

    In the early nineties the region of Central and Eastern Europe (CEE, more than 1 million km² and 100 million inhabitants) went through fundamental political, economic and social changes which eventually led to the European integration process. This positively influenced urban water and wastewater management , which had an unbalanced structure and rather low level of development. The paper outlines first the 1990 situation (water supply, sewerage and wastewater treatment (WWT)) and the infrastructure development of the last two decades, on the basis of a comprehensive data collection for six countries (Bulgaria, the Czech Republic, Hungary, Poland, Romania and Slovakia). Austria serves as a reference basis. Alterations of some of the drivers such as GDP (Gross Domestic Product), water tariff, investment funding and legislation are studied in detail. Then, the paper focuses on WWT by analyzing data of 20 large plants. Influent and effluent quality is evaluated. Technology indicators are estimated and assessed. They include plant removal rates and violation ratios assuming the application of the Urban Wastewater Directive, primary clarifier removal rates, actual anoxic volume and sludge age in comparison with the recommendations of the ATV guideline, criteria of secondary settling tanks and energy consumption. Finally, nutrient removal rates and upgrading options are outlined.

  18. Self-organization in interface dynamics and urban development

    OpenAIRE

    Meron, Ehud

    1999-01-01

    The view of the urban environment as an extended nonlinear system introduces new concepts, motivates new questions, and suggests new methodologies in the study of urban dynamics. A review of recent results on interface dynamics in nonequilibrium physical systems is presented, and possible implications on the urban environment are discussed. It is suggested that the growth modes of specific urban zones (e.g. residential, commercial, or industrial) and the factors affecting them can be studied ...

  19. Manufacturing capability as a technological development indicator in the pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    John Jairo Gallo Castro

    2010-01-01

    Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

  20. School as Community, Community as School: Examining Principal Leadership for Urban School Reform and Community Development

    Science.gov (United States)

    Green, Terrance L.

    2018-01-01

    For decades, reform has been a persistent issue in urban schools. Research suggests that urban school reforms that are connected to equitable community development efforts are more sustainable, and that principals play a pivot role in leading such efforts. Yet, limited research has explored how urban school principals connect school reform with…

  1. What policies should be there for employment in urban areas of developing countries?

    OpenAIRE

    Gugushvili, Alexi

    2006-01-01

    This paper examines employment policies in urban areas of developing world. We follow traditional economic analysis and present the urban unemployment problem as an inequality of labour supply and demand on labour markets. The effects of demand-side and supply-side policies on informal urban employment are investigated through econometrical models. One or several variables are employed as crude proxies for every policy option. The dependent variable is informal urban employment as a per cent ...

  2. Model Development and Process Analysis for Lean Cellular Design Planning in Aerospace Assembly and Manufacturing

    Science.gov (United States)

    Hilburn, Monty D.

    Successful lean manufacturing and cellular manufacturing execution relies upon a foundation of leadership commitment and strategic planning built upon solid data and robust analysis. The problem for this study was to create and employ a simple lean transformation planning model and review process that could be used to identify functional support staff resources required to plan and execute lean manufacturing cells within aerospace assembly and manufacturing sites. The lean planning model was developed using available literature for lean manufacturing kaizen best practices and validated through a Delphi panel of lean experts. The resulting model and a standardized review process were used to assess the state of lean transformation planning at five sites of an international aerospace manufacturing and assembly company. The results of the three day, on-site review were compared with baseline plans collected from each of the five sites to determine if there analyzed, with focus on three critical areas of lean planning: the number and type of manufacturing cells identified, the number, type, and duration of planned lean and continuous kaizen events, and the quantity and type of functional staffing resources planned to support the kaizen schedule. Summarized data of the baseline and on-site reviews was analyzed with descriptive statistics. ANOVAs and paired-t tests at 95% significance level were conducted on the means of data sets to determine if null hypotheses related to cell, kaizen event, and support resources could be rejected. The results of the research found significant differences between lean transformation plans developed by site leadership and plans developed utilizing the structured, on-site review process and lean transformation planning model. The null hypothesis that there was no difference between the means of pre-review and on-site cell counts was rejected, as was the null hypothesis that there was no significant difference in kaizen event plans. These

  3. Urbanization in Kenya: Urbanization Trends and Prospects; Rural Development and Urban Growth. An International Urbanization Survey Report to the Ford Foundation.

    Science.gov (United States)

    Laurenti, Luigi; Gerhart, John

    Two articles on the urbanization of Kenya are presented in this survey. The first one, "Urbanization Trends and Prospects," by Luigi Laurenti, states that urbanization has only recently been recognized as a problem of some importance in Kenya, and this recognition is far from comprehensive. Consequently, public policy--and especially…

  4. Development of Optimum Manufacturing Technologies of Radial Plates for the ITER Toroidal Field Coils

    International Nuclear Information System (INIS)

    Nakajima, H.; Hamada, K.; Okuno, K.; Abe, K.; Kakui, H.; Yamaoka, H.; Maruyama, N.

    2006-01-01

    A stainless steel structure called a radial plate is used in the toroidal field (TF) coils of the International Thermonuclear Experimental Reactor (ITER) in order to support large electromagnetic force generated in the conductors. It is a 13.7 m x 8.7 m D-shaped plate having 11 grooves on each side in which conductors are wound. Although severe dimensional accuracy, for example flatness within 2 mm, and tight schedule that all radial plates for 9 TF coils (63 plates) have to be manufactured in about 4 years are required in manufacture of the radial plates, there are no industries in the world who have manufactured a large complicated structure like the radial plate with high accuracy. Japan Atomic Energy Agency (JAEA) has been studying rational manufacturing method and developing the optimum manufacturing technologies of the radial plates in order to satisfy the above requirements in collaboration with the Ishikawajima-Harima Heavy Industries Co., Ltd. (IHI). Several trial manufactures of radial plates have been performed to clarify the following key points: · Effect of nitrogen content in material on machinability · Effect of cutting direction of a piece on deformation caused by machining · Effect of machining shape (curve or straight) on machining condition · Effect of laser welding technique on penetration and welding deformation Three different 316LN materials having nitrogen content of 0.12 %, 0.17%, and 0.20% were used to investigate nitrogen content effect on machinability. Machinability of lower nitrogen content material was slightly better than that of higher nitrogen content material. Three sectoral pieces were cut by plasma cutting technique from a hot rolled plate without any difficulties and one of them was machined to a curved segment of the radial plate having the same size as actual one. However, unacceptable large deformation over 5 mm flatness was found during machining which would be caused by curved shape of grooves and/or cutting direction

  5. Study on the Delimitation of the Urban Development Boundary in a Special Economic Zone: A Case Study of the Central Urban Area of Doumen in Zhuhai, China

    Directory of Open Access Journals (Sweden)

    Biao Zheng

    2018-03-01

    Full Text Available Since it implemented open-door policies, China has become the fastest growing economy in the world, and its urbanization level has steadily improved. Taking a special economic zone as the object of study, this paper delineates the urban development boundary of the Central Urban Area of Doumen. Using multiple models and methods, the urban development rigid and elastic boundaries are delineated separately, with the rigid boundary serving as the premise and foundation for delineating the elastic boundary. The results are as follows. First, the scale of the urban development rigid boundary is 79.60 km². Moreover, the scales of the urban development elastic boundaries in 2020 and 2026 are 24.51 km² and 28.53 km², respectively. Second, by delimiting the urban development elastic boundary, the compactness of urban land will be improved. Third, the urban development boundary of this paper is reasonable in theory. This paper suggests that the urban development boundary can curb urban sprawl and guide rational urban development, which is conducive to optimizing an urban spatial layout.

  6. Future directions for the development of virtual reality within an automotive manufacturer.

    Science.gov (United States)

    Lawson, Glyn; Salanitri, Davide; Waterfield, Brian

    2016-03-01

    Virtual Reality (VR) can reduce time and costs, and lead to increases in quality, in the development of a product. Given the pressure on car companies to reduce time-to-market and to continually improve quality, the automotive industry has championed the use of VR across a number of applications, including design, manufacturing, and training. This paper describes interviews with 11 engineers and employees of allied disciplines from an automotive manufacturer about their current physical and virtual properties and processes. The results guided a review of research findings and scientific advances from the academic literature, which formed the basis of recommendations for future developments of VR technologies and applications. These include: develop a greater range of virtual contexts; use multi-sensory simulation; address perceived differences between virtual and real cars; improve motion capture capabilities; implement networked 3D technology; and use VR for market research. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  7. Development and manufacturing of special fission chambers for in-core measurement requirements in nuclear reactors

    International Nuclear Information System (INIS)

    Geslot, B.; Berhouet, F.; Oriol, L.; Breaud, S.; Jammes, C.; Filliatre, P.; Villard, J. F.

    2009-01-01

    The Dosimetry Command control and Instrumentation Laboratory (LDCI) at CEA/Cadarache is specialized in the development, design and manufacturing of miniature fission chambers (from 8 mm down to 1.5 mm in diameter). The LDCI fission chambers workshop specificity is its capacity to manufacture and distribute special fission chambers with fissile deposits other than U 235 (typically Pu 242 , Np 237 , U 238 , Th 232 ). We are also able to define the characteristics of the detector for any in-core measurement requirements: sensor geometry, fissile deposit material and mass, filling gas composition and pressure, operating mode (pulse, current or Campbelling) with associated cable and electronics. The fission chamber design relies on numerical simulation and modeling tools developed by the LDCI. One of our present activities in fission chamber applications is to develop a fast neutron flux instrumentation using Campbelling mode dedicated to measurements in material testing reactors. (authors)

  8. Development and manufacturing of special fission chambers for in-core measurement requirements in nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Geslot, B.; Berhouet, F.; Oriol, L.; Breaud, S.; Jammes, C.; Filliatre, P.; Villard, J. F. [CEA, DEN, Dosimetry Command Control and Instrumentation Laboratory, F-13109 Saint-Paul-lez-Durance (France)

    2009-07-01

    The Dosimetry Command control and Instrumentation Laboratory (LDCI) at CEA/Cadarache is specialized in the development, design and manufacturing of miniature fission chambers (from 8 mm down to 1.5 mm in diameter). The LDCI fission chambers workshop specificity is its capacity to manufacture and distribute special fission chambers with fissile deposits other than U{sup 235} (typically Pu{sup 242}, Np{sup 237}, U{sup 238}, Th{sup 232}). We are also able to define the characteristics of the detector for any in-core measurement requirements: sensor geometry, fissile deposit material and mass, filling gas composition and pressure, operating mode (pulse, current or Campbelling) with associated cable and electronics. The fission chamber design relies on numerical simulation and modeling tools developed by the LDCI. One of our present activities in fission chamber applications is to develop a fast neutron flux instrumentation using Campbelling mode dedicated to measurements in material testing reactors. (authors)

  9. Manufacturing technology education development project. Project accomplishment summary for 91-Y12P-050-A1

    Energy Technology Data Exchange (ETDEWEB)

    Douglass, S. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Smith, R. [Tennessee Dept. of Education, Nashville, TN (United States)

    1996-09-25

    The purpose of the project was to provide a set of supplemental instructional equipment and materials to Tennessee high school students to raise their level of knowledge about manufacturing technologies with the hope that some of the best and brightest would choose manufacturing as a career path. The role of the Y-12 Plant was primarily technical: renovate the portable classroom; select and purchase appropriate equipment; install and test the equipment; assist in the development of the curriculum; train the initial group of teachers; and provide technical assistance where needed after the laboratory was deployed. The role of the Department of Education was to provide the mobile facility; assist in the design of the laboratory; lead the development of the curriculum; deploy the trailer; and develop the structure for administering the selection of schools, training teachers, and movement of the laboratory. The Department of Education as subcontracted with Middle Tennessee State University to handle the details of laboratory deployment.

  10. Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

    Science.gov (United States)

    Ma, Zhongmin; Cheng, Mengting; Wang, Mei

    2017-08-01

    The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

  11. Developments for medium-capacity urban public transport

    Energy Technology Data Exchange (ETDEWEB)

    Calverley, H B

    1979-11-01

    Light guideway transit (LGT), that is, automatically operated urban electric vehicles carrying 12 to 70 passengers via elevated guideways or underground tunnels, with stations 250 to 800 meters apart, and self-contained during off hours as regards propulsion and control, could help relieve future energy demands. Over 30 LGT systems are currently under development, and their various mechanical, electrical, and power-source (three-phase distribution, thyristor phase-angle control and dc rotating motors) aspects are presented. Developments in present-day trolleys, battery buses (lead-acid, alkaline), combustion-engined buses, and hybrid vehicles are reviewed, with particular emphasis on energy, such as its mechanical storage by flywheels during regenerative braking. Specific requirements of future LGT systems, including vehicle support systems (by magnetic levitation using dc magnets, air support by either cushion or suction, pneumatic tires, steel wheels, or above-ground suspension), headway and line capacity, junction switching, and automatic vehicle control are discussed.

  12. Early Vocabulary Development in Rural and Urban Mozambique

    Directory of Open Access Journals (Sweden)

    Paul Vogt

    2015-01-01

    Full Text Available This paper presents an adaptation of the MacArthur-Bates Communicative Development Inventories (short version into three languages spoken in Southern Mozambique. The tool was adapted to study vocabulary development among children of 12 to 25 months of age in two communities: a rural, monolingual Changana speaking community and an urban bilingual Ronga and Portuguese speaking community. We present a norming study carried out with the adaptation, as well as a validation study. The norming study revealed various predictors for reported expressive and receptive vocabulary size. These predictors include age, socioeconomic status, reported health problems, caregiving practices, and location. The validation of the CDI among a small sample in both communities shows positive correlations between the reported expressive vocabulary scores and children’s recorded word production. We conclude that the adapted CDI is useful for research purposes and could be used as a template for adaptations into other languages from similar cultures.

  13. A lead isotope perspective on urban development in ancient Naples.

    Science.gov (United States)

    Delile, Hugo; Keenan-Jones, Duncan; Blichert-Toft, Janne; Goiran, Jean-Philippe; Arnaud-Godet, Florent; Romano, Paola; Albarède, Francis

    2016-05-31

    The influence of a sophisticated water distribution system on urban development in Roman times is tested against the impact of Vesuvius volcanic activity, in particular the great eruption of AD 79, on all of the ancient cities of the Bay of Naples (Neapolis). Written accounts on urbanization outside of Rome are scarce and the archaeological record sketchy, especially during the tumultuous fifth and sixth centuries AD when Neapolis became the dominant city in the region. Here we show that isotopic ratios of lead measured on a well-dated sedimentary sequence from Neapolis' harbor covering the first six centuries CE have recorded how the AD 79 eruption was followed by a complete overhaul of Neapolis' water supply network. The Pb isotopic signatures of the sediments further reveal that the previously steady growth of Neapolis' water distribution system ceased during the collapse of the fifth century AD, although vital repairs to this critical infrastructure were still carried out in the aftermath of invasions and volcanic eruptions.

  14. 24 CFR 982.622 - Manufactured home space rental: Rent to owner.

    Science.gov (United States)

    2010-04-01

    ..., DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT SECTION 8 TENANT BASED ASSISTANCE: HOUSING CHOICE VOUCHER PROGRAM Special Housing Types Manufactured Home Space Rental § 982.622 Manufactured home space rental: Rent to owner. (a) What is included. (1) Rent to owner for rental of a manufactured home space includes payment...

  15. Improving Land Administration and Management for Sustainable Urban Development : Philippines Urbanization Review Policy Notes

    OpenAIRE

    World Bank

    2017-01-01

    This policy note assesses the performance of existing land administration and management (LAM) system in the Philippines in creating an environment for competitive cities. It looks at the influence of LAM (including property rights) in the proper functioning of land markets in urban areas; the effectiveness of land use planning and regulations in shaping urban growth, reducing informality,...

  16. Can additional urban development have major impacts on streamflow of a peri-urban catchment? A case study from Portugal

    Science.gov (United States)

    Ferreira, Carla; Walsh, Rory; Nunes, João; Steenhuis, Tammo; de Lima, João; Coelho, Celeste; Ferreira, António

    2016-04-01

    It is well known that urban development brings about changes in hydrological response. Relatively little, however, is known about impacts on streamflow during urban development in the Mediterranean climate. This paper examines changes in streamflow resulting from the construction of an enterprise park, a major road and apartment blocks in a small partially urbanized peri-urban catchment (6.2 km2) in central Portugal. These developments led to an increase in urban area from 32% to 40% over a five-year period (hydrological years 2008/09-2012/13). In the initial two-year period minor land-use changes increased impervious surfaces from 12.8% to 13.2%. The subsequent three-year period led to a further 17.2% increase in impervious area. Streamflow was recorded by a V-notch weir at the catchment outlet. Rainfall was recorded at a weather station 0.5km north of the catchment, and by five tipping-bucket raingauges installed in January 2011 within the study catchment. Annual runoff and storm runoff coefficients ranged from 14% to 21% and 9% to 14%, respectively, recorded in 2011/12 and 2012/13. Although these differences in runoff were caused in part by variation in rainfall, the comparison between 2009/10 (pre-) and 2012/13 (post-additional urban development), with broadly similar rainfall (887mm vs 947mm, respectively) and evapotranspiration (740mm vs 746mm), showed a 43% increase in storm runoff (from 90mm to 129mm), resulting from additional overland flow generated largely by the 4.4% increase in impervious surfaces. The additional urban development also led to changes in hydrograph parameters. The increase in storm runoff was not progressive over the study period, but regression lines of storm runoff against rainstorm parameters exhibited higher vertical positions in 2012/13 than 2008/09. Increasing peak flows, however, were more progressive over the study period, with annual regression lines displaying higher vertical positions, but with a clear distance between pre

  17. Redefining the role of designers within an urban community using digital design and localized manufacturing of wearables

    NARCIS (Netherlands)

    Stam, C.J.; Van der Velden, N.M.; Rubio, G.; Verlinden, J.C.

    2014-01-01

    The maker culture has created a dynamic in which designers are less responsible for the design and quality of the final product, but for the tools the consumer uses to create their own. While additive manufacturing (AM) is gaining acceptance among the general public, it is still seen as a

  18. Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System

    Energy Technology Data Exchange (ETDEWEB)

    Babu, Sudarsanam Suresh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Peter, William H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility; Dehoff, Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Manufacturing Demonstration Facility

    2016-05-01

    ) systems development, (iv) material feedstock, (v) process planning, (vi) residual stress & distortion, (vii) post-processing, (viii) qualification of parts, (ix) supply chain and (x) business case. Furthermore, an open innovation network methodology was proposed to accelerate the development and deployment of new large-scale metal additive manufacturing technology with the goal of creating a new generation of high deposition rate equipment, affordable feed stocks, and large metallic components to enhance America’s economic competitiveness.

  19. Developing an inventor support service which performs early stage market and manufacturing evaluations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    American businesses are learning the difficult high cost lesson of ignoring production and market factors (producibility, unit product cost (UPC), marketability, etc) during the engineering design phase of product development. Studies have shown that the Japanese spend three times as long as Americans in the design feasibility and decision process of new product introductions and one third the amount of time in the implementation of those products. There is a 20 to 1 cost benefit on effort applied in the design phase versus the production phase of the product life cycle. The number one goal of this project was to establish an organization that has, as one of its purposes, the providing of services responsive to the needs of independent inventors. The number two goal was to demonstrate the value of providing marketing and manufacturing counsel at an early stage in the product development process. The first study goal was met by providing the materials and information necessary to establish an evaluation team and an organization to handle such evaluations. The second study goal was met by demonstrating the impact of early market analysis and manufacturing considerations on product design and therefore on the description of the invention for four different inventions. These inventions were selected at various stages of development. Regardless of stage of development, the marketing and manufacturing reviews resulted in significant changes in design and/or market positioning.

  20. Developing an inventor support service which performs early stage market and manufacturing evaluations. [Final Report

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    American businesses are learning the difficult high cost lesson of ignoring production and market factors (producibility, unit product cost (UPC), marketability, etc) during the engineering design phase of product development. Studies have shown that the Japanese spend three times as long as Americans in the design feasibility and decision process of new product introductions and one third the amount of time in the implementation of those products. There is a 20 to 1 cost benefit on effort applied in the design phase versus the production phase of the product life cycle. The number one goal of this project was to establish an organization that has, as one of its purposes, the providing of services responsive to the needs of independent inventors. The number two goal was to demonstrate the value of providing marketing and manufacturing counsel at an early stage in the product development process. The first study goal was met by providing the materials and information necessary to establish an evaluation team and an organization to handle such evaluations. The second study goal was met by demonstrating the impact of early market analysis and manufacturing considerations on product design and therefore on the description of the invention for four different inventions. These inventions were selected at various stages of development. Regardless of stage of development, the marketing and manufacturing reviews resulted in significant changes in design and/or market positioning.

  1. 24 CFR 982.620 - Manufactured home: Applicability of requirements.

    Science.gov (United States)

    2010-04-01

    ... URBAN DEVELOPMENT SECTION 8 TENANT BASED ASSISTANCE: HOUSING CHOICE VOUCHER PROGRAM Special Housing... resident of manufactured home. (1) A family may reside in a manufactured home with assistance under the...-in aide. (1) If approved by the PHA, a live-in aide may reside with the family to care for a person...

  2. Coupling Modelling of Urban Development and Flood Risk – An Attempt for a Combined Software Framework

    DEFF Research Database (Denmark)

    Löwe, Roland; Sto Domingo, Nina; Urich, Christian

    2015-01-01

    to use the results of the hydraulic simulation to condition DANCE4WATER and to account for flood risk in the simulated urban development. In an Australian case study, we demonstrate that future flood risk can be significantly reduced while maintaining the overall speed of urban development.......We have developed a setup that couples the urban development model DANCE4WATER with the 1D-2D hydraulic model MIKE FLOOD. The setup makes it possible to assess the impact of urban development and infrastructural change scenarios on flood risk in an automated manner. In addition, it permits us...

  3. Legal considerations for urban underground space development in Malaysia

    Directory of Open Access Journals (Sweden)

    F. Zaini

    2017-12-01

    Full Text Available In 2008, the Malaysia land code, named the National Land Code 1965 (NLC 1965, was amended to add Part Five (A to deal with the disposal of underground space. In addition, the Circular of the Director General of Lands and Mines No. 1/2008 was issued to assist the application of Part Five (A of the NLC 1965. However, the legislation is still questionable and has instigated many arguments among numerous actors. Therefore, this research was undertaken to examine legal considerations for the development of underground space. The focus is on four legal considerations, namely underground space ownership, the bundle of rights, depth, and underground space utilization. Rooted in qualitative methods, interviews were conducted with respondents involved in the development of underground space in Malaysia. The obtained data were then analyzed descriptively. The findings differentiated the rights of landowners for surface land and underground space, and their liability for damages and the depth. It was indicated that the current legislation in Malaysia, namely Part Five (A of the NLC 1965 and the Circular of the Director General of Lands and Mines No. 1/2008, is adequate to facilitate the development of underground space in terms of legal considerations. However, to further facilitate the development of underground land in the future, based on the research, four enhancements are recommended for legal considerations pertaining to the development of underground space in Malaysia. Keywords: Underground space, Legal consideration, Land right, Urban development

  4. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Directory of Open Access Journals (Sweden)

    Panagiotis Sfakianakis

    2014-03-01

    Full Text Available Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization and further yogurt manufacture (fermentation physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields, and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review.

  5. Conventional and Innovative Processing of Milk for Yogurt Manufacture; Development of Texture and Flavor: A Review

    Science.gov (United States)

    Sfakianakis, Panagiotis; Tzia, Constatnina

    2014-01-01

    Milk and yogurt are important elements of the human diet, due to their high nutritional value and their appealing sensory properties. During milk processing (homogenization, pasteurization) and further yogurt manufacture (fermentation) physicochemical changes occur that affect the flavor and texture of these products while the development of standardized processes contributes to the development of desirable textural and flavor characteristics. The processes that take place during milk processing and yogurt manufacture with conventional industrial methods, as well as with innovative methods currently proposed (ultra-high pressure, ultrasound, microfluidization, pulsed electric fields), and their effect on the texture and flavor of the final conventional or probiotic/prebiotic products will be presented in this review. PMID:28234312

  6. From domestic manufacture to Industrial Revolution

    DEFF Research Database (Denmark)

    Weisdorf, Jacob Louis

    2006-01-01

    industrial development. An emerging view, however, turns the old story on its head, arguing that agricultural improvement is a response to urban development. This paper follows the line of this emerging view, demonstrating that productivity growth in commercial manufacture is crucial to the performance...

  7. The development of manufacturing techniques and philosophies for the cost effective production of modern nuclear transport flasks

    International Nuclear Information System (INIS)

    Balmer, S.L.; Ward, S.

    1997-01-01

    Design changes to enhance the characteristics of a new generation of large transport flasks have created new challenges to manufacturers. New fabrication, manufacturing and handling techniques have been developed but often at significant costs. The paper examines these developments covering two main areas, welding and the application of neutron absorbing material. Whilst designers have looked at enhancing flask performance, they often fail to appreciate that ultimately whatever has been designed, has to be firstly sold' and then manufactured. Optimisation of design must therefore include due consideration of the ultimate clients cost structure and the manufacturing route. The paper suggests that the only way this can be achieved is to adopt a teaming approach between designers and manufacturers. The ultimate choice of manufacturer however is left to the designers who must consider competencies, track record and commitment to assistance prior to entering into an agreement. (Author)

  8. Development of textile-reinforced carbon fibre aluminium composites manufactured with gas pressure infiltration methods

    OpenAIRE

    W. Hufenbach; M. Gude; A. Czulak; J. Śleziona; A. Dolata-Grosz; M. Dyzia

    2009-01-01

    Purpose: The aim of his paper is to show potential of textile-reinforced carbon fibre aluminium composite with advantage of the lightweight construction of structural components subjected to thermo-mechanical stress.Design/methodology/approach: The manufacture of specimens of the carbon fibre-reinforced aluminium was realised with the aid of an advanced differential gas pressure infiltration technique, which was developed at ILK, TU Dresden.Findings: The gas pressure infiltration technology e...

  9. Disposition of Human Resource Development Structure in Manufacturing Firms in Malaysia

    OpenAIRE

    Haslinda Abdullah

    2009-01-01

    Problem statement: Human Resource Development (HRD) is rapidly gaining importance in manufacturing firms in Malaysia, as there are strong driving forces such as legal, financial and infrastructural support from the Government. This is because the Government believes that investment in human capital is key to the success of the countrys economy. However, this strategy may not be effective without the availability of a properly implemented HRD structure. Approach: The aim of this paper is to ex...

  10. Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

    OpenAIRE

    Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

    2009-01-01

    Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

  11. Retrofitting the Low Impact Development Practices into Developed Urban areas Including Barriers and Potential Solution

    Science.gov (United States)

    Shafique, Muhammad; Kim, Reeho

    2017-06-01

    Low impact development (LID)/green infrastructure (GI) practices have been identified as the sustainable practices of managing the stormwater in urban areas. Due to the increasing population, most of the cities are more developing which results in the change of natural area into impervious areas (roads, buildings etc.). Moreover, urbanization and climate change are causing many water-related problems and making over cities unsafe and insecure. Under these circumstances, there is a need to introduce new stormwater management practices into developed cities to reduce the adverse impacts of urbanization. For this purpose, retrofitting low impact development practices demands more attention to reduce these water-related problems and trying to make our cities sustainable. In developed areas, there is a little space is available for the retrofitting of LID practices for the stormwater management. Therefore, the selection of an appropriate place to retrofitting LID practices needs more concern. This paper describes the successfully applied retrofitting LID practices around the globe. It also includes the process of applying retrofitting LID practices at the suitable place with the suitable combination. Optimal places for the retrofitting of different LID practices are also mentioned. This paper also highlights the barriers and potential solutions of retrofitting LID practices in urban areas.

  12. Retrofitting the Low Impact Development Practices into Developed Urban areas Including Barriers and Potential Solution

    Directory of Open Access Journals (Sweden)

    Shafique Muhammad

    2017-06-01

    Full Text Available Low impact development (LID/green infrastructure (GI practices have been identified as the sustainable practices of managing the stormwater in urban areas. Due to the increasing population, most of the cities are more developing which results in the change of natural area into impervious areas (roads, buildings etc.. Moreover, urbanization and climate change are causing many water-related problems and making over cities unsafe and insecure. Under these circumstances, there is a need to introduce new stormwater management practices into developed cities to reduce the adverse impacts of urbanization. For this purpose, retrofitting low impact development practices demands more attention to reduce these water-related problems and trying to make our cities sustainable. In developed areas, there is a little space is available for the retrofitting of LID practices for the stormwater management. Therefore, the selection of an appropriate place to retrofitting LID practices needs more concern. This paper describes the successfully applied retrofitting LID practices around the globe. It also includes the process of applying retrofitting LID practices at the suitable place with the suitable combination. Optimal places for the retrofitting of different LID practices are also mentioned. This paper also highlights the barriers and potential solutions of retrofitting LID practices in urban areas.

  13. Infrastructure development, income inequality, and urban sustainability in the People's Republic of China

    OpenAIRE

    Mendoza, Octasiano M. Valerio

    2017-01-01

    This paper examines the relationship between infrastructure development and income inequality in urban People's Republic of China. Recent policies target reductions in income inequality while increasing sustainable urban development. Infrastructure investment plays a key role in achieving both goals, yet the effects of different infrastructures on income disparities at the city level remain undetermined. Using 10 city-level infrastructure indicators relating to sustainable urban development a...

  14. Development of a simplified urban water balance model (WABILA).

    Science.gov (United States)

    Henrichs, M; Langner, J; Uhl, M

    2016-01-01

    During the last decade, water sensitive urban design (WSUD) has become more and more accepted. However, there is not any simple tool or option available to evaluate the influence of these measures on the local water balance. To counteract the impact of new settlements, planners focus on mitigating increases in runoff through installation of infiltration systems. This leads to an increasing non-natural groundwater recharge and decreased evapotranspiration. Simple software tools which evaluate or simulate the effect of WSUD on the local water balance are still needed. The authors developed a tool named WABILA (Wasserbilanz) that could support planners for optimal WSUD. WABILA is an easy-to-use planning tool that is based on simplified regression functions for established measures and land covers. Results show that WSUD has to be site-specific, based on climate conditions and the natural water balance.

  15. [Advances in low impact development technology for urban stormwater management].

    Science.gov (United States)

    Liu, Wen; Chen, Wei-ping; Peng, Chi

    2015-06-01

    Low impact development ( LID), as an innovative technology for stormwater management, is effective to mitigate urban flooding and to detain pollutants. This paper systemically introduced the LID technology system, and summarized the reduction effects of three typical LID facilities (i.e. , bio-retention, green roof and permeable pavement) on stormwater runoff and main pollutants in recent literature, as well as research outcomes and experiences of LID technology on model simulation, cost-benefit analysis and management system. On this basis, we analyzed the problems and limitations of current LID technology studies. Finally, some suggestions about future research directions, appropriate design and scientific management were put forth. This work intended to provide scientific basis and suggestions for widespread use and standard setting of LID technology in China by referencing overseas studies.

  16. Process development for the manufacturing of state-of-the-art spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Schebitz, Florian; Dietrich, Matthias [Advanced Nuclear Fuels GmbH, Karlstein (Germany)

    2013-07-01

    At the beginning it was questioned if 'time to market' is really important for the nuclear industry. The clear answer is YES. Even if the development times might be longer compared to projects in other industries it is still beneficial to use concurrent engineering. In the world wide network of manufacturing sites, Advanced Nuclear Fuels GmbH in Karlstein is quite often involved when the development of new processes is necessary. As ANF Karlstein is delivering products around the world the experience with different customer requirements supports an optimized solution in order to fulfill these principle requirements and to deliver state-of-the-art products like spacer grids. Continues feedback from process development already improves the first prototypes. In the meantime ANF Karlstein manufactured the components for both new fuel assembly designs which are introduced as a first set of Lead Fuel Assemblies. For the manufacturing of the next sets of spacer grids (for tests and next series of Lead Fuel Assemblies) the described processes will be used and further improved, so that an industrialized solution is available. (orig.)

  17. Identifying urban infrastructure multi-hazard risk in developing country contexts

    Science.gov (United States)

    Taylor, Faith; Malamud, Bruce; Millington, James

    2017-04-01

    This work presents a method to coarsely zone urban areas into different infrastructure typologies, from which physical vulnerability to a range of natural hazards and multi-hazard interactions can be estimated, particularly for developing country contexts where access to data can be a challenge. This work builds upon techniques developed for urban micrometeorology for classifying 12 urban typologies (Stewart and Oke, 2011) using Landsat 8 30 m × 30 m remote sensing imagery (Betchel et al., 2015). For each of these 12 urban typologies, we develop general rules about the presence, type and level of service of 10 broad categories of infrastructure (including buildings, roads, electricity and water), which we refer to as 'urban textures'. We have developed and applied this technique to five urban areas varying in size and structure across Africa: Nairobi (Kenya); Karonga (Malawi); Mzuzu (Malawi); Ibadan (Nigeria) and Cape Town (South Africa). For each urban area, a training dataset of 10 samples of each of the 12 urban texture classes is digitised using Google Earth imagery. A random forest classification is performed using SAGA GIS, resulting in a map of different urban typologies for each city. Based on >1200 georeferenced field photographs and expert interviews for Karonga (Malawi) and Nairobi (Kenya), generally applicable rules about the presence, type and level of service of 12 infrastructure types (the 'urban texture') are developed for each urban typology. For each urban texture, we are broadly reviewing how each infrastructure might be physically impacted by 21 different natural hazards and hazard interactions. This can aid local stakeholders such as emergency responders and urban planners to systematically identify how the infrastructure in different parts of an urban area might be affected differently during a natural disaster event.

  18. Geospatial Based Information System Development in Public Administration for Sustainable Development and Planning in Urban Environment

    Science.gov (United States)

    Kouziokas, Georgios N.

    2016-09-01

    It is generally agreed that the governmental authorities should actively encourage the development of an efficient framework of information and communication technology initiatives so as to advance and promote sustainable development and planning strategies. This paper presents a prototype Information System for public administration which was designed to facilitate public management and decision making for sustainable development and planning. The system was developed by using several programming languages and programming tools and also a Database Management System (DBMS) for storing and managing urban data of many kinds. Furthermore, geographic information systems were incorporated into the system in order to make possible to the authorities to deal with issues of spatial nature such as spatial planning. The developed system provides a technology based management of geospatial information, environmental and crime data of urban environment aiming at improving public decision making and also at contributing to a more efficient sustainable development and planning.

  19. Design for manufacturing and assembly key performance indicators to support high-speed product development

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Juel Jespersen, Ida Kirstine; Kjærgaard, Thomas

    2018-01-01

    Design for Manufacturing and Assembly (DfMA) has great potential for minimizing late engineering changes (ECs) that impede high-speed product development and delay time-to-profit. However, our understanding of DfMA and its implementation in industry is still incomplete. This paper presents...... an industrial case study on late ECs in high-speed product development and compares the results to other examples from the literature. It then proposes a framework with sets of key performance indicators (KPIs) to measure and improve producability and product quality throughout the product development process....

  20. Work carried out in France on the design, manufacture, handling and development of nuclear fuel

    International Nuclear Information System (INIS)

    Brandt, R.C.; Joly, G.; Gloaguen, A.; Delafosse, J.

    1977-01-01

    Although the ordinary water reactors to be found in France all belong to the PWR type, the fuel used covers a broad range: box assemblies with steel canning at the SENA plant, 15x15 at TIHANGE, 17x17 for 900 MW phases, slug and plate fuel developed by the Atomic Energy Commission and extra-long 17x17 for 1300 MW phases, also being developed. A description of what France is undertaking today with respect to: 1) design; 2) manufacture; 3) management; and 4) development of full assemblies is presented [fr

  1. Urban Development for Whom? Changing Forms of Urbanization in Chengdu, China

    DEFF Research Database (Denmark)

    Zeuthen, Jesper Willaing

    is on the institutions regulating changed use of land when communities shift from rural to urban. In the current phase of urbanization far from the city centre, politically decided plans bargained far from rural communities play a much larger role than they did in earlier phases of urbanization closer to the city. China...... process means more formal regulations than in the past, it also means less credible institutions, because regulations may change almost over night as a result of political decisions on which local communities have no influence. In the current situation, the paper argues, the high degree of state control...

  2. Development and Hotfire Testing of Additively Manufactured Copper Combustion Chambers for Liquid Rocket Engine Applications

    Science.gov (United States)

    Gradl, Paul R.; Greene, Sandy; Protz, Chris

    2017-01-01

    NASA and industry partners are working towards fabrication process development to reduce costs and schedules associated with manufacturing liquid rocket engine components with the goal of reducing overall mission costs. One such technique being evaluated is powder-bed fusion or selective laser melting (SLM), commonly referred to as additive manufacturing (AM). The NASA Low Cost Upper Stage Propulsion (LCUSP) program was designed to develop processes and material characterization for GRCop-84 (a NASA Glenn Research Center-developed copper, chrome, niobium alloy) commensurate with powder bed AM, evaluate bimetallic deposition, and complete testing of a full scale combustion chamber. As part of this development, the process has been transferred to industry partners to enable a long-term supply chain of monolithic copper combustion chambers. To advance the processes further and allow for optimization with multiple materials, NASA is also investigating the feasibility of bimetallic AM chambers. In addition to the LCUSP program, NASA’s Marshall Space Flight Center (MSFC) has completed a series of development programs and hot-fire tests to demonstrate SLM GRCop-84 and other AM techniques. MSFC’s efforts include a 4,000 pounds-force thrust liquid oxygen/methane (LOX/CH4) combustion chamber. Small thrust chambers for 1,200 pounds-force LOX/hydrogen (H2) applications have also been designed and fabricated with SLM GRCop-84. Similar chambers have also completed development with an Inconel 625 jacket bonded to the GRCop-84 material, evaluating direct metal deposition (DMD) laser- and arc-based techniques. The same technologies for these lower thrust applications are being applied to 25,000-35,000 pounds-force main combustion chamber (MCC) designs. This paper describes the design, development, manufacturing and testing of these numerous combustion chambers, and the associated lessons learned throughout their design and development processes.

  3. Self-organization in interface dynamics and urban development

    Directory of Open Access Journals (Sweden)

    Ehud Meron

    1999-01-01

    Full Text Available The view of the urban environment as an extended nonlinear system introduces new concepts, motivates new questions, and suggests new methodologies in the study of urban dynamics. A review of recent results on interface dynamics in nonequilibrium physical systems is presented, and possible implications on the urban environment are discussed. It is suggested that the growth modes of specific urban zones (e.g. residential, commercial, or industrial and the factors affecting them can be studied using mathematical models that capture two generic interface instabilities.

  4. Product Development Categorized as Independent Strategic and Innovative Practice: Case from Indian Manufacturing

    Directory of Open Access Journals (Sweden)

    Himanshu Dutt

    2008-06-01

    Full Text Available In recent time, Indian manufacturing has seen technologically intensive and resource optimization based initiatives to satisfy competitive urge and to build or sustain market position. This they do by developing products either strategically or innovatively, but that is hardly distinguished or seen as a separate approach to product development. Strategically, product development is resource optimization based while innovatively, it is product differentiation focused. This paper outlines the strategic and innovative approach to product development and analyzes sector specific role of each in product development. The study is undertaken with nine product development team-leaders and resource-heads, three of each from automobile, steel and textile. It is concluded that textile is strategically skewed toward product development whereas automobile is inclined towards innovative orientation. The biggest limitation of this study is smaller sample-size because respondents are reluctant to disclose new technical initiatives and composition of product development.

  5. A Study on Planning Strategies for Urban Housing Block Development

    Institute of Scientific and Technical Information of China (English)

    Zeng Wei; Wang Hua; You Juanjuan; Wang Linlin; Li Caige

    2016-01-01

    As a city is the carrier of human society and housing is an important part of a citizen's life and survival,the citizens' choice of their housing mode will influence the material and spiritual life of the individuals,families,and society.In view of the diversification of values and investments,people are eager for a harmonious relationship between the community and the city.As a kind of compact and efficient housing mode,the housing block highlights the organic link of the community within the city in an open and shared living environment.This paper reviews the development of housing blocks in various countries and summarizes the characteristics of housing blocks through a comparison with traditional gated residential quarters and urban blocks.It then analyzes the current difficulties of housing block development in China from aspects such as the planning concept,planning system,management mode,and development mode and accordingly proposes planning principles and strategies in hope of providing theoretical supports for the development and construction of housing blocks in China.

  6. Process development for green part printing using binder jetting additive manufacturing

    Science.gov (United States)

    Miyanaji, Hadi; Orth, Morgan; Akbar, Junaid Muhammad; Yang, Li

    2018-05-01

    Originally developed decades ago, the binder jetting additive manufacturing (BJ-AM) process possesses various advantages compared to other additive manufacturing (AM) technologies such as broad material compatibility and technological expandability. However, the adoption of BJ-AM has been limited by the lack of knowledge with the fundamental understanding of the process principles and characteristics, as well as the relatively few systematic design guideline that are available. In this work, the process design considerations for BJ-AM in green part fabrication were discussed in detail in order to provide a comprehensive perspective of the design for additive manufacturing for the process. Various process factors, including binder saturation, in-process drying, powder spreading, powder feedstock characteristics, binder characteristics and post-process curing, could significantly affect the printing quality of the green parts such as geometrical accuracy and part integrity. For powder feedstock with low flowability, even though process parameters could be optimized to partially offset the printing feasibility issue, the qualities of the green parts will be intrinsically limited due to the existence of large internal voids that are inaccessible to the binder. In addition, during the process development, the balanced combination between the saturation level and in-process drying is of critical importance in the quality control of the green parts.

  7. Manufacturing Process Developments for Regeneratively-Cooled Channel Wall Rocket Nozzles

    Science.gov (United States)

    Gradl, Paul; Brandsmeier, Will

    2016-01-01

    Regeneratively cooled channel wall nozzles incorporate a series of integral coolant channels to contain the coolant to maintain adequate wall temperatures and expand hot gas providing engine thrust and specific impulse. NASA has been evaluating manufacturing techniques targeting large scale channel wall nozzles to support affordability of current and future liquid rocket engine nozzles and thrust chamber assemblies. The development of these large scale manufacturing techniques focus on the liner formation, channel slotting with advanced abrasive water-jet milling techniques and closeout of the coolant channels to replace or augment other cost reduction techniques being evaluated for nozzles. NASA is developing a series of channel closeout techniques including large scale additive manufacturing laser deposition and explosively bonded closeouts. A series of subscale nozzles were completed evaluating these processes. Fabrication of mechanical test and metallography samples, in addition to subscale hardware has focused on Inconel 625, 300 series stainless, aluminum alloys as well as other candidate materials. Evaluations of these techniques are demonstrating potential for significant cost reductions for large scale nozzles and chambers. Hot fire testing is planned using these techniques in the future.

  8. A Strategic Knowledge Map for the Research and Development Department in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Śliwa Małgorzata

    2016-01-01

    Full Text Available Knowledge is a corporate resource, being grounds for initiating activities, which is important in a dynamic economy. The difficulties related to obtaining tacit knowledge, related primarily to experience and observation of the knowledge employee (Mendryk, 2011, encourage the companies to use tools supporting knowledge management and location. This article attempts at designing a dedicated, strategic knowledge map for a research and development department in a manufacturing company. Based on the reference works, the detailed characteristics of specific sources of knowledge in a manufacturing company and tools supporting the process of converting the tacit knowledge into explicit one, for example, the knowledge maps, were devised. Then, a strategic knowledge map model was designed for the research and development department (hereinafter abbreviated as SKM – R&D in the manufacturing company, comprising the following components: (1 fields of knowledge, (2 internal and external processes in the R&D department, and (3 sources of knowledge. Then, a practical implementation of the SKM – R&D model was presented.

  9. DEVELOPMENT OF INFORMATION TECHNOLOGY STRATEGIC PLANNING FOR MANUFACTURING INDUSTRY (CASE STUDY: PT MCM

    Directory of Open Access Journals (Sweden)

    Leonardus Hardjo

    2013-10-01

    Full Text Available IT Department in PT MCM has to carry out the duties and functions of developing solution to support the business unit in their operation and gain some benefits which should be obtained by using IT in manufacturing such as increasing efficiency, improving the effectivity in making decision and helping to promote the products. This study aims to design information technology strategic planning in accordance with the strategic plan. The research method is using the IT Strategic Planning framework of Alex Cullen and Marc Cecere. This study uses SWOT and IT Balanced Scorecard to analyze the needs of IT at PT MCM. The results of this study are recommended strategic steps to optimize the implementation of IT in the company to improve the performance from IT division to obtain the benefits by implementing IT in manufacturing and to form IT Blueprint, which is part of the information technology strategic plan in PT MCM.

  10. Development and fabrication of patient-specific knee implant using additive manufacturing techniques

    Science.gov (United States)

    Zammit, Robert; Rochman, Arif

    2017-10-01

    Total knee replacement is the most effective treatment to relief pain and restore normal function in a diseased knee joint. The aim of this research was to develop a patient-specific knee implant which can be fabricated using additive manufacturing techniques and has reduced wear rates using a highly wear resistant materials. The proposed design was chosen based on implant requirements, such as reduction in wear rates as well as strong fixation. The patient-specific knee implant improves on conventional knee implants by modifying the articulating surfaces and bone-implant interfaces. Moreover, tribological tests of different polymeric wear couples were carried out to determine the optimal materials to use for the articulating surfaces. Finite element analysis was utilized to evaluate the stresses sustained by the proposed design. Finally, the patient-specific knee implant was successfully built using additive manufacturing techniques.

  11. TF4SM: A Framework for Developing Traceability Solutions in Small Manufacturing Companies

    Science.gov (United States)

    Bordel Sánchez, Borja; Alcarria, Ramón; Martín, Diego; Robles, Tomás

    2015-01-01

    Nowadays, manufacturing processes have become highly complex. Besides, more and more, governmental institutions require companies to implement systems to trace a product’s life (especially for foods, clinical materials or similar items). In this paper, we propose a new framework, based on cyber-physical systems, for developing traceability systems in small manufacturing companies (which because of their size cannot implement other commercial products). We propose a general theoretical framework, study the requirements of these companies in relation to traceability systems, propose a reference architecture based on both previous elements and build the first minimum functional prototype, to compare our solution to a traditional tag-based traceability system. Results show that our system reduces the number of inefficiencies and reaction time. PMID:26610509

  12. Private Sector-led Urban Development Projects : Management, Partnerships & Effects in the Netherlands and the UK

    NARCIS (Netherlands)

    Heurkens, E.W.T.M.

    2012-01-01

    Subject of study is Private Sector-led Urban Development Projects. Such projects involve property developers taking a leading role and local authorities adopting a facilitating role in the management of the development of an urban area, based on a framework of public requirements and a formal

  13. Institutional conditions for sustainable private sector-led urban development projects : A conceptual model

    NARCIS (Netherlands)

    Heurkens, E.W.T.M.

    2016-01-01

    Across the globe sustainable private sector-led urban development projects (SPUDPs) in the built environment rarely commence as real estate developers face several institutional barriers which limit their capacity to develop economic-viable, social-responsible, environmental-friendly urban places.

  14. [Research progress and development trend of quantitative assessment techniques for urban thermal environment.

    Science.gov (United States)

    Sun, Tie Gang; Xiao, Rong Bo; Cai, Yun Nan; Wang, Yao Wu; Wu, Chang Guang

    2016-08-01

    Quantitative assessment of urban thermal environment has become a focus for urban climate and environmental science since the concept of urban heat island has been proposed. With the continual development of space information and computer simulation technology, substantial progresses have been made on quantitative assessment techniques and methods of urban thermal environment. The quantitative assessment techniques have been developed to dynamics simulation and forecast of thermal environment at various scales based on statistical analysis of thermal environment on urban-scale using the historical data of weather stations. This study reviewed the development progress of ground meteorological observation, thermal infrared remote sensing and numerical simulation. Moreover, the potential advantages and disadvantages, applicability and the development trends of these techniques were also summarized, aiming to add fundamental knowledge of understanding the urban thermal environment assessment and optimization.

  15. An Integrated Modelling Framework to Assess Flood Risk under Urban Development and Changing Climate

    DEFF Research Database (Denmark)

    that combines a model for the socio-economic development of cities (DANCE4WATER) with an urban flood model. The urban flood model is a 1D-2D spatially distributed hydrologic and hydraulic model that, for a given urban layout, simulates flow in the sewer system and the surface flow in the catchment (MIKE FLOOD......). The socio-economic model computes urban layouts that are transferred to the hydraulic model in the form of changes of impervious area and potential flow paths on the surface. Estimates of flood prone areas, as well as the expected annual damage due to flooding, are returned to the socio-economic model...... as an input for further refinement of the scenarios for the urban development. Our results in an Australian case study suggest that urban development is a major driver for flood risk and vice versa that flood risk can be significantly reduced if it is accounted for in the development of the cities...

  16. Application of Environmental Change Efficiency to the Sustainability of Urban Development at the Neighborhood Level

    Directory of Open Access Journals (Sweden)

    Hsing-Fu Kuo

    2015-08-01

    Full Text Available This study describes a new assessment model framework, termed the driving forces-pressure-state-impact-policy and pattern (DPSIP model, for environmental change efficiency in urban land development, based on urban sustainable development and the theory of economic efficiency evaluation. A spatial and measurable efficiency value is defined for environmental changes in urban land development, which provides a comprehensive evaluation index for the efficiency of urban development and its environmental impact. This type of urban interior sustainability is considered new within the context of global environmental changes. We identify nine important indicators to evaluate the relative efficiency of 233 neighborhoods in Tainan, Taiwan. The results indicate that the average environmental change efficiency is 89.44%, which shows clear spatial differentiation. The key indicators affecting the efficiency score are area, population density, location, mixed land uses, the floor area ratio, and the impervious ratio. In the future, urban design can reduce environmental impacts and enhance efficiency values.

  17. Synergetic Development Assessment of Urban River System Landscapes

    Directory of Open Access Journals (Sweden)

    Jingya Qiao

    2017-11-01

    Full Text Available This paper presents Synergetic Development Assessment (SDA as a methodology to evaluate the environmental, economic, and social performance of an urban river system landscape from the perspective of sustainability. SDA is based on synergetics and its “order parameters” theory, proposed as a science to study the self-organization of complex systems. A case study of river system landscapes in China was carried out by, first, simplifying the composite system into three subsystems: environmental, economic, and social; then, going on to construct a hierarchical structure to explore the order parameters as the evaluation index. The Analytic Hierarchy Process was used to get the weight of the evaluation index to complete the assessment index system. At the same time, a Sequential Synergy Degree Model was built to accomplish the SDA. We find that from 2005 to 2015, the order degree of the environmental subsystem developed slowly, with fluctuations, and that river pattern is the key factor. Meanwhile, the order degree of the economic subsystem fluctuated widely, which significantly depended on the changing value of water resources, and the order degree of social subsystem improved continuously, with social culture lagging far behind. As a whole, the synergy degree of the composite system developed orderly at a corresponding low level, which was in low synergy from 2005 to 2009 and then in general synergy up to 2015.

  18. An inclusive development perspective on the geographies of urban governance

    NARCIS (Netherlands)

    Gupta, J.; Pfeffer, K.; Ros-Tonen, M.; Verrest, H.; Gupta, J.; Pfeffer, K.; Verrest, H.; Ros-Tonen, M.

    2015-01-01

    Urban governance in cities is shaped by, and shapes, global discourses. These discourses shape the discussion of how governance should be organized, what forms it takes, what kinds of governance instruments, methods and data are used and what urban governance practices may look like. Much of this is

  19. Growing better Cities: Urban Agriculture for Sustainable Development

    International Development Research Centre (IDRC) Digital Library (Canada)

    It reflects on IDRC's 20-year experience in a wide variety of urban settings in the ..... For the urban poor in particular, the availability of fresh vegetables and other ...... improvising many different kinds of containers, including old kitchen pots, ...

  20. An Initial Formulation. Research, Diagnosis and Development in Urban Education.

    Science.gov (United States)

    Gappert, Gary

    Described in this report are factors which affect and/or limit urban educational research and dimensions of cities which should be considered in making social and organizational research in urban education more relevant. Some of these considerations are learning, institutional and management deficits, the lack of a total systems perspective on the…

  1. Integrating mobility and urban development agendas: a manifesto

    NARCIS (Netherlands)

    Bertolini, L.

    2012-01-01

    Contemporary urban lifestyles and business practices are increasingly dependent on mobility. At the same time, the negative impacts of mobility on natural and social environments are growing dramatically, as is the public outcry for their reversal. Urban planners are faced with a difficult dilemma:

  2. Development of a manufacturing technology of compacted graphite iron castings from a cupola furnace

    Directory of Open Access Journals (Sweden)

    O. Bouska

    2012-01-01

    Full Text Available Compacted graphite iron, also known as vermicular cast iron or semiductile cast iron is a modern material, the production of which is increasing globaly. Recently this material has been very often used in automotive industry. This paper reviews some findigs gained during the development of the manufacturing technology of compacted graphite iron under the conditions in Slévárna Heunisch Brno, Ltd. The new technology assumes usage of cupola furnace for melting and is beeing developed for production of castings weighing up to 300 kilograms poured into bentonite sand moulds.

  3. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  4. Land use planning for sustainable development of peri-urban zones

    Directory of Open Access Journals (Sweden)

    Živanović-Miljković Jelena

    2012-01-01

    Full Text Available Taking into consideration that growth of urban population has impacts on land use and that managing urban population change is one of the most important contemporary challenges, this paper deals with the sustainable development of peri-urban zones which represent important an environment where employment opportunities are developed and resources exploited (particularly agricultural resources and environment where important recreational and leisure activities could be pursued. Within the review of current concepts and planning practices, the concepts of multifunctional agriculture and multifunctional landscapes in peri-urban zones are pointed out, as well as EU Developing Periurban Projects. The paper particularly focuses on the current situation in Serbia, where there is no specific legal basis for the planning of peri-urban areas, although there are positive examples of strategies, regulations and planning documents which treat agriculture and greenery in peri-urban zones in a sustainable manner.

  5. Developing a district energy system in a competitive urban market

    Energy Technology Data Exchange (ETDEWEB)

    Mitola, J.P. [Unicom Thermal Technologies, Chicago, IL (United States)

    1995-09-01

    In two year`s time, Unicorn Thermal Technologies has grown into one of the largest district cooling systems of 25,000 tons with a 1996 plan to grow to 40,000 tons. This growth is attributed to the development and implementation of a marketing and sales plan based on thorough market research and innovative marketing and sales strategies, and the consistent implementation of those strategies. The beginning of the sales effort was focused around the company`s first district cooling facility, However, it quickly grew into a much broader vision as market acceptance increased. Although the district energy industry has often based its message on being a low cost energy provider, market research and early sales experience indicated that customers choose district cooling as a value added service. As customers began to reserve capacity in the first plant, the idea that district cooling is a value added service and not a commodity energy product was continually reinforced through marketing communications. Although this analysis is a review of developing a district energy system in a competitive urban market, it purposely avoids a long winded discussion of head to head competition.

  6. Development of the supply chain oriented quality assurance system for aerospace manufacturing SMEs and its implementation perspectives

    Science.gov (United States)

    Hussein, Abdullahi; Cheng, Kai

    2016-10-01

    Aerospace manufacturing SMEs are continuously facing the challenge on managing their supply chain and complying with the aerospace manufacturing quality standard requirement due to their lack of resources and the nature of business. In this paper, the ERP system based approach is presented to quality control and assurance work in light of seamless integration of in-process production data and information internally and therefore managing suppliers more effectively and efficiently. The Aerospace Manufacturing Quality Assurance Standard (BS/EN9100) is one of the most recognised and essential protocols for developing the industry-operated-and-driven quality assurance systems. The research investigates using the ERP based system as an enabler to implement BS/EN9100 quality management system at manufacturing SMEs and the associated implementation and application perspectives. An application case study on a manufacturing SME is presented by using the SAP based implementation, which helps further evaluate and validate the approach and application system development.

  7. Adaptive urban development : a symbiosis between cities on land and water in the 21st century

    NARCIS (Netherlands)

    Dr. ing. Rutger de Graaf

    2012-01-01

    Adaptive urban development is the design, construction and continuing evolution of urban areas to anticipate and react to changes in the environment and society. These changes include both processes within the city itself and external developments. It is expected that until 2100 a total of 5 billion

  8. Civic initiatives in urban development : self-governance versus self-organisation in planning practice

    NARCIS (Netherlands)

    Rauws, Ward

    2016-01-01

    This paper discusses two distinct interpretations of self-organisation with regard to civic initiatives in urban development. One concerns urban developments in which citizens deliberately organise themselves in order to realise a collective ambition. This interpretation of self-organisation

  9. Dynamic plan modelling and visualization : converting an urban development plan into a transition scenario

    NARCIS (Netherlands)

    Vries, de B.; Jessurun, A.J.; Sadowski - Rasters, G.; Tidafy, T; Dorta, T

    2009-01-01

    Application of 3D models in urban planning practice is still limited to visualization of existing or newly designed situations. Municipalities are looking for possibilities to communicate the transition process of the urban development area with the citizens. A prototype system was developed to

  10. Institutional entrepreneurship in sustainable urban development: Dutch successes as inspiration for transformation

    NARCIS (Netherlands)

    Woolthuis, R.K.; Hooimeijer, F.; Bossink, B.; Mulder, G.; Brouwer, J.

    2013-01-01

    Sustainable urban development is a wicked problem. On the basis of three case studies, we conclude that institutional entrepreneurs play an important role in sustainable urban development. The question we address is how institutional entrepreneurs do this. We theorize and find six tactics that

  11. Institutional entrepreneurship in sustainable urban development Dutch successes as inspiration for transformation

    NARCIS (Netherlands)

    Klein Woolthuis, R.J.A.; Hooimeijer, F.; Bossink, B.A.G.; Mulder, G.; Brouwer, J.

    2013-01-01

    Sustainable urban development is a wicked problem. On the basis of three case studies, we conclude that institutional entrepreneurs play an important role in sustainable urban development. The question we address is how institutional entrepreneurs do this. We theorize and find six tactics that

  12. Reframing the role of knowledge parks and science cities in knowledge-based urban development

    NARCIS (Netherlands)

    Benneworth, Paul Stephen; Ratinho, Tiago

    2014-01-01

    Knowledge-based urban developments (KBUDs) are an increasingly common element of urban planning and strategy making: policy makers and developers set out to stimulate economic prosperity by promoting the integration and concentration of research, technology, and human capital. But KBUD is, by its

  13. Development of materials and manufacturing technologies for Indian fast reactor programme

    International Nuclear Information System (INIS)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra

    2010-01-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required for testing

  14. Development of materials and manufacturing technologies for Indian fast reactor programme

    Energy Technology Data Exchange (ETDEWEB)

    Raj, Baldev; Jayakumar, T.; Bhaduri, A.K.; Mandal, Sumantra [Indira Gandhi Centre for Atomic Research, Kalpakkam (India)

    2010-07-01

    Fast Breeder Reactors (FBRs) are vital towards meeting security and sustainability of energy for the growing economy of India. The development of FBRs necessitates extensive research and development in domains of materials and manufacturing technologies in association with a wide spectrum of disciplines and their inter-twining to meet the challenging technology. The paper highlight the work and the approaches adopted for the successful deployment of materials, manufacturing and inspection technologies for the in-core and structural components of current and future Indian Fast Breeder Reactor Programme. Indigenous development of in-core materials viz. Titanium modified austenitic stainless steel (Alloy D9) and its variants, ferritic/martensitic oxide-dispersion strengthened (ODS) steels as well as structural materials viz. 316L(N) stainless steel and modified 9Cr-1Mo have been achieved through synergistic interactions between Indira Gandhi Centre for Atomic Research (IGCAR), education and research institutes and industries. Robust manufacturing technology has been established for forming and joining of various components of 500 MWe Prototype Fast Breeder Reactor (PFBR) through 'science-based technology' approach. To achieve the strict quality standards of formed parts in terms of geometrical tolerances, residual stresses and microstructural defects, FEM-based modelling and experimental validation was carried out for estimation of spring-back during forming of multiple curvature thick plantes. Optimization of grain boundary character distribution in Alloy D9 was carried out by adopting the grain boundary engineering approach to reduce radiation induced segregation. Extensive welding is involved in the fabrication of reactor vessels, piping, steam generators, fuel sub-assemblies etc. Activated Tungsten Inert Gas Welding process along with activated flux developed at IGCAR has been successfully used in fabrication of dummy fuel subassemblies (DFSA) required

  15. Rural-urban migration in a developing country: Botswana, Africa.

    Science.gov (United States)

    Tarver, J D; Miller, H M

    1987-01-01

    Trends in internal migration in Botswana are analyzed, with a focus on rural-urban migration. Data are from the 1981 census and from a survey carried out in 1979. The authors note that even though the predominance of subsistence agriculture acts as a deterrent to rural-urban migration, it is probable that the total and percentage of people living in urban areas will increase. However, the magnitude and pattern of future migration will fluctuate over time as social and economic conditions change.

  16. Setup for Scenario-free Modelling of Urban Flood Risk in Non-stationary Climate and Urban Development Conditions

    DEFF Research Database (Denmark)

    Löwe, Roland; Urich, Christian; Kulahci, Murat

    An early flood warning system has been developed for urban catchments and is currently running in online operation in Copenhagen. The system is highly dependent on the quality of rainfall forecast inputs. An investigation of precipitation inputs from Radar Nowcast (RN), Numerical Weather Predicti...

  17. Hot forming and quenching pilot process development for low cost and low environmental impact manufacturing.

    Science.gov (United States)

    Hall, Roger W.; Foster, Alistair; Herrmann Praturlon, Anja

    2017-09-01

    The Hot Forming and in-tool Quenching (HFQ®) process is a proven technique to enable complex shaped stampings to be manufactured from high strength aluminium. Its widespread uptake for high volume production will be maximised if it is able to wholly amortise the additional investment cost of this process compared to conventional deep drawing techniques. This paper discusses the use of three techniques to guide some of the development decisions taken during upscaling of the HFQ® process. Modelling of Process timing, Cost and Life-cycle impact were found to be effective tools to identify where development budget could be focused in order to be able to manufacture low cost panels of different sizes from many different alloys in a sustainable way. The results confirm that raw material cost, panel trimming, and artificial ageing were some of the highest contributing factors to final component cost. Additionally, heat treatment and lubricant removal stages played a significant role in the overall life-cycle assessment of the final products. These findings confirmed development priorities as novel furnace design, fast artificial ageing and low-cost alloy development.

  18. Development Algorithm of the Technological Process of Manufacturing Gas Turbine Parts by Selective Laser Melting

    Science.gov (United States)

    Sotov, A. V.; Agapovichev, A. V.; Smelov, V. G.; Kyarimov, R. R.

    2018-01-01

    The technology of the selective laser melting (SLM) allows making products from powders of aluminum, titanium, heat-resistant alloys and stainless steels. Today the use of SLM technology develops at manufacture of the functional parts. This in turn requires development of a methodology projection of technological processes (TP) for manufacturing parts including databases of standard TP. Use of a technique will allow to exclude influence of technologist’s qualification on made products quality, and also to reduce labor input and energy consumption by development of TP due to use of the databases of standard TP integrated into a methodology. As approbation of the developed methodology the research of influence of the modes of a laser emission on a roughness of a surface of synthesized material was presented. It is established that the best values of a roughness of exemplars in the longitudinal and transversal directions make 1.98 μm and 3.59 μm respectively. These values of a roughness were received at specific density of energy 6.25 J/mm2 that corresponds to power and the speed of scanning of 200 W and 400 mm/s, respectively, and a hatch distance of 0.08 mm.

  19. Developing a Framework for Qualitative Evaluation of Urban Interventions in Iranian Historical Cores

    Directory of Open Access Journals (Sweden)

    Azadeh Arjomand Kermani

    2017-11-01

    Full Text Available Iranian historic city cores are important parts of modern cities because of their valuable monuments and morphology but are also significant because of their population density, location and the major governmental functions they house. Since 1920, modernisation policies and urban development trends in Iran have justified spatial transformation and redevelopment and the demolition and destruction of traditional urban fabrics as a way to provide contemporary requirements and hygiene improvements for the residents. As the UNESCO recommendation on the Historic Urban Landscape argues, historic urban cores can only sustain their role in the daily life of the city by getting prepared for and participating in this transformation process. Disagreement over the value of historic urban cores on the one hand and inevitable modification of urban areas in a developing country like Iran on the other, creates a problematic condition for the preservation of the historic environment. The Valletta Principles for the Safeguarding and Management of Historic Cities, Towns and Urban Areas states that historic towns and urban areas require an integrated approach including their “protection, conservation, enhancement and management as well as their coherent development and their harmonious adaptation to contemporary life”. In order to support the process of reaching a balance between these spatial targets in Iran, this research discusses the relation between urban transformation projects and their heritage context. In doing so it connects international literature on urban quality and traditional Iranian urban forms to contemporary Iranian urban design practice. To achieve this integration between urban heritage and spatial development, a framework of quality attributes has been developed to evaluate urban interventions in a heritage context. The three main pillars of this framework have been extracted from and inspired by international literature and guidelines

  20. Effects of urban development on stream ecosystems in nine metropolitan study areas across the United States

    Science.gov (United States)

    Coles, James F.; McMahon, Gerard; Bell, Amanda H.; Brown, Larry R.; Fitzpatrick, Faith A.; Scudder Eikenberry, Barbara C.; Woodside, Michael D.; Cuffney, Thomas F.; Bryant, Wade L.; Cappiella, Karen; Fraley-McNeal, Lisa; Stack, William P.

    2012-01-01

    Urban development is an important agent of environmental change in the United States. The urban footprint on the American landscape has expanded during a century and a half of almost continuous development. Eighty percent of Americans now live in metropolitan areas, and the advantages and challenges of living in these developed areas—convenience, congestion, employment, pollution—are part of the day-to-day realities of most Americans. Nowhere are the environmental changes associated with urban development more evident than in urban streams. Contaminants, habitat destruction, and increasing streamflow flashiness resulting from urban development have been associated with the disruption of biological communities, particularly the loss of sensitive aquatic species. Every stream is connected downstream to larger water bodies, including rivers, reservoirs, and ultimately coastal waters. Inputs of chemical contaminants or sediments at any point along the stream can cause degradation downstream with adverse effects on biological communities and on economically valuable resources, such as fisheries and tourism.

  1. AN EVALUATION TO IDENTIFY THE BARRIERS TO THE FEASIBILITY OF URBAN DEVELOPMENT PLANS: FIVE DECADES OF EXPERIENCE IN URBAN PLANNING IN IRAN

    Directory of Open Access Journals (Sweden)

    Mohammad Javad Maghsoodi Tilaki

    2014-01-01

    Full Text Available The rapid urbanization in many developing countries has indicat ed several challenges in different aspects. This is due t o inefficient urban planning ap proaches towards managing the development process. Similar to many other developing count ries, Iran has experienced rapid urbanization in recent decades. Although over the last few decades, urban planning processes have been applied to develop Iranian c ities, urban planning has failed to tackle the challenges facing the cities. This paper s eeks to identify the barriers that have prevented Iranian c ities from achieving the goals of urban planning. The purpose of this paper is to provide a comprehensive review of the curre nt literature on the concept of urban planning and to assess the urban development plan proc ess in Iranian cities. The required data were collected through a review of international theoretical studies, Iranian experimental research and governmental reports. The findings of this study reveal five major barriers to the feasibility of the urban planning process , including the urban plans context, structure of urban pla nning, related law and regulatio ns, public participation, and financial resources.

  2. Development and manufacture of ultra-fine NbTi filament wires at ALSTHOM

    International Nuclear Information System (INIS)

    Hoang, G.K.; Laumond, Y.; Sabrie, J.L.; Dubots, P.

    1986-01-01

    Ultra-fine NbTi filament wires have been developed and manufactured by ALSTHOM. It is now possible to produce industrial copper -copper-nickel matrix wires with 0.6 mu m NbTi filaments for use in 50 / 60 Hz machines. Smaller filaments with diameters down to 0.08 mu m have been obtained with 254 100 filament wire samples. Studies are now being carried out on copper matrix conductors to reduce the filament diameter. The first results show that it is possible to obtain submicron filaments even in copper matrix wires

  3. The development of a commercial MOX fuel manufacturing capability in the U.K

    International Nuclear Information System (INIS)

    Macphee, D.S.; Young, M.P.

    1995-01-01

    BNFL is implementing a strategy to establish a commercial MOX manufacturing capability within the UK. The design and provision of the fabrication plants is incorporating the considerable experience within the Company of MOX technology, fuel fabrication and nuclear plant design. The first phase of the strategy is complete with the successful operation of the Demonstration Facility. The development programmes supporting the increased scale of operation for a commercial scale facility are substantially complete. Design and construction of a 120t HM/year plant is well advanced supported by a substantial in-house design and project management team. (author)

  4. Development of an ear cap in chronic suppurative otitis media using additive manufacturing and TRIZ.

    Science.gov (United States)

    Mawale, Mahesh B; Kuthe, Abhaykumar; Mawale, Anupama M; Dahake, Sandeep W

    2018-06-01

    The prevalence rate of chronic suppurative otitis media is high and its treatment continues to be a challenge for the otorhinolaryngologists. Due to middle ear infection, there may be pain, hearing loss and spontaneous rupture of the eardrum which results in perforation. Infections can cause a hole in the eardrum as a side effect of otitis media. The patients suffering from ear perforation or having a hole in eardrum require preventing entry of water in the ear. This article describes the development of ear cap using additive manufacturing and TRIZ (a collaborative tool) to prevent the entry of water in the ear during chronic otitis media.

  5. Quality assurance experience in the manufacture of PFBR reactor vessel during technology development work

    International Nuclear Information System (INIS)

    Shanmugam, K.; Chandramohan, R.; Ramamurthy, M.K.

    1996-01-01

    An efficient and proper implementation of quality assurance in the technology development works of Prototype Fast Breeder Reactor (PFBR) main vessel was undertaken to achieve the desired quality and dimensional accuracy of main vessel. In this paper an attempt has been made to bring out the methods and procedures adopted to implement the quality assurance programme on important activities including approval of documents, material, general requirements for manufacture of SS components, inspection procedures, forming and welding of petals, non-destructive testing etc. (author)

  6. Design challenges facing urban development in Dar es Salaam City ...

    African Journals Online (AJOL)

    The paper shows that in order for the resources to be deployed sustainable ... of environmentally friendly building materials, designs must take into account local ... housing construction in low-income informal settlements which in most urban ...

  7. Developing Scientific Index System of Urban Master Planning

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Master plan is the fundamental basis for urban construction and administration, an important public policy of the govern-ments, as well as an overall, comprehen-sive, and strategic task related to politics, economy,

  8. Developing the desert:the pace and process of urban growth in Dubai

    OpenAIRE

    Nassar, Ahmed K.; Blackburn, George Alan; Whyatt, Duncan

    2014-01-01

    It is generally acknowledged that Dubai is a rapidly developing urban area which has grown to support a large human population within a hyperarid environment. However, no publicly accessible information exists concerning the rate or form of the urbanization process in Dubai. Therefore, this investigation used a time series of remotely sensed data to quantify land cover change in Dubai emirate between 1972 and 2011. A hybrid classification method accurately discriminated urban and other land c...

  9. Development of a lightweight electric urban delivery truck

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, G.; Martin, R.; Vader, S. [Unicell Ltd., Toronto, ON (Canada)

    2007-07-15

    A study was conducted to develop a lightweight urban parcel delivery vehicle that features a composite material, monocoque low-floor body and a zero-emission electric drive system. The long-term goal of project was to produce a vehicle with an energy efficiency that was nearly 90 per cent better than a conventional delivery vehicle. The objectives of the development phase were to complete the structural design of the composite, monocoque low-floor body. Electric drive options were explored to confirm the feasibility in terms of vehicle range, zero emissions and energy efficiency. This involved characterization of the vehicle duty cycle, development of a computer model of the electric powertrain, and simulations to confirm the vehicle's power and energy requirements. The design of the prototype was validated through testing in accordance with recognized vehicle performance tests and an in-service trial by Purolator Courier Ltd., a major Canadian courier service. Testing of the QuickSider delivery truck included vehicle dynamics, energy consumption, safety compliance, and in-service evaluation. No unacceptable stresses, deflections or resonances were identified in the structure. The vehicle's performance was found to be consistent with design expectations. Dynamometer tests have indicated that the ZEV range of the prototype is greater than the targeted 120 km. The overall energy efficiency of the vehicle was 50 per cent, as compared 11 per cent for a conventional diesel delivery truck. It was concluded that an overall energy efficiency of 75 per cent is achievable in production vehicles if improvements are made to the battery system, drive train, regenerative braking and auxiliary systems. 29 figs., 2 appendices.

  10. Urban Big Data and the Development of City Intelligence

    OpenAIRE

    Pan, Yunhe; Tian, Yun; Liu, Xiaolong; Gu, Dedao; Hua, Gang

    2016-01-01

    This study provides a definition for urban big data while exploring its features and applications of China's city intelligence. The differences between city intelligence in China and the “smart city” concept in other countries are compared to highlight and contrast the unique definition and model for China's city intelligence in this paper. Furthermore, this paper examines the role of urban big data in city intelligence by showing that it not only serves as the cornerstone of this trend as it...

  11. Implementation of a configurable laboratory information management system for use in cellular process development and manufacturing.

    Science.gov (United States)

    Russom, Diana; Ahmed, Amira; Gonzalez, Nancy; Alvarnas, Joseph; DiGiusto, David

    2012-01-01

    Regulatory requirements for the manufacturing of cell products for clinical investigation require a significant level of record-keeping, starting early in process development and continuing through to the execution and requisite follow-up of patients on clinical trials. Central to record-keeping is the management of documentation related to patients, raw materials, processes, assays and facilities. To support these requirements, we evaluated several laboratory information management systems (LIMS), including their cost, flexibility, regulatory compliance, ongoing programming requirements and ability to integrate with laboratory equipment. After selecting a system, we performed a pilot study to develop a user-configurable LIMS for our laboratory in support of our pre-clinical and clinical cell-production activities. We report here on the design and utilization of this system to manage accrual with a healthy blood-donor protocol, as well as manufacturing operations for the production of a master cell bank and several patient-specific stem cell products. The system was used successfully to manage blood donor eligibility, recruiting, appointments, billing and serology, and to provide annual accrual reports. Quality management reporting features of the system were used to capture, report and investigate process and equipment deviations that occurred during the production of a master cell bank and patient products. Overall the system has served to support the compliance requirements of process development and phase I/II clinical trial activities for our laboratory and can be easily modified to meet the needs of similar laboratories.

  12. Manufacturing and maintenance technologies developed for a thick-wall structure of the ITER vacuum vessel

    International Nuclear Information System (INIS)

    Onozuka, M.; Alfile, J.P.; Aubert, Ph.; Dagenais, J.-F.; Grebennikov, D.; Ioki, K.; Jones, L.; Koizumi, K.; Krylov, V.; Maslakowski, J.; Nakahira, M.; Nelson, B.; Punshon, C.; Roy, O.; Schreck, G.

    2001-01-01

    Development of welding, cutting and non-destructive testing (NDT) techniques, and development of remotized systems have been carried out for on-site manufacturing and maintenance of the thick-wall structure of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV). Conventional techniques, including tungsten inert gas welding, plasma cutting, and ultrasonic inspection, have been improved and optimized for the application to thick austenitic stainless steel plates. In addition, advanced methods have been investigated, including reduced-pressure electron-beam and multi-pass neodymium-doped yttrium aluminum garnet (NdYAG) laser welding, NdYAG laser cutting, and electro-magnetic acoustic transducer inspection, to improve cost and technical performance. Two types of remotized systems with different payloads have been investigated and one of them has been fabricated and demonstrated in field joint welding, cutting, and NDT tests on test mockups and full-scale ITER VV sector models. The progress and results of this development to date provide a high level of confidence that the manufacturing and maintenance of the ITER VV is feasible

  13. Manufacturing and maintenance technologies developed for a thick-wall structure of the ITER vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Onozuka, M. E-mail: onozukm@itereu.de; Alfile, J.P.; Aubert, Ph.; Dagenais, J.-F.; Grebennikov, D.; Ioki, K.; Jones, L.; Koizumi, K.; Krylov, V.; Maslakowski, J.; Nakahira, M.; Nelson, B.; Punshon, C.; Roy, O.; Schreck, G

    2001-09-01

    Development of welding, cutting and non-destructive testing (NDT) techniques, and development of remotized systems have been carried out for on-site manufacturing and maintenance of the thick-wall structure of the International Thermonuclear Experimental Reactor (ITER) vacuum vessel (VV). Conventional techniques, including tungsten inert gas welding, plasma cutting, and ultrasonic inspection, have been improved and optimized for the application to thick austenitic stainless steel plates. In addition, advanced methods have been investigated, including reduced-pressure electron-beam and multi-pass neodymium-doped yttrium aluminum garnet (NdYAG) laser welding, NdYAG laser cutting, and electro-magnetic acoustic transducer inspection, to improve cost and technical performance. Two types of remotized systems with different payloads have been investigated and one of them has been fabricated and demonstrated in field joint welding, cutting, and NDT tests on test mockups and full-scale ITER VV sector models. The progress and results of this development to date provide a high level of confidence that the manufacturing and maintenance of the ITER VV is feasible.

  14. Geneva-Seattle collaboration in support of developing country vaccine manufacturing.

    Science.gov (United States)

    Stevenson, Michael A

    2018-04-01

    Vaccines were once produced almost exclusively by state-supported entities. While they remain essential tools for public health protection, the majority of the world's governments have allowed industry to assume responsibility for this function. This is significant because while the international harmonisation of quality assurance standards have effectively increased vaccine safety, they have also reduced the number of developing country vaccine producers, and Northern multinational pharmaceutical companies have shown little interest in offering the range of low-priced products needed in low and middle-income-country contexts. This article examines how public-private collaboration is relevant to contemporary efforts aimed at strengthening developing country manufacturers' capacity to produce high-quality, low-priced vaccines. Specifically, it casts light on the important and largely complimentary roles of the World Health Organization, The Bill and Melinda Gates Foundation, and the Seattle-based non-profit PATH, in this process. The take away message is that external support remains critical to ensuring that developing country vaccine manufacturers have the tools needed to produce for both domestic and global markets, and the United Nations supply chain, and collaboration at the public-private interface is driving organisational innovation focused on meeting these goals.

  15. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  16. Energy and sustainable urban transport development in China: Challenges and solutions

    International Nuclear Information System (INIS)

    Zhang, Xilang; Hu, Xiaojun

    2002-01-01

    This paper presents an overview of urban road transport development and challenges in energy consumption in China. It relates sustainable urban road transport development with energy consumption and environmental management. It analyzes the main challenges related to urban road transport development: energy security, low efficiency in energy utilization, and unsustainable environmental management. It also discusses necessary technological and policy initiatives to deal with these challenges: e.g., promoting the development and dissemination of cleaner vehicle technologies, substitution of LPG, CNG, LNG and bio fuels for gasoline and diesel, strengthening regulations on vehicle emissions, expediting public transport development, and the effective management of the soaring private cars. (author)

  17. Energy and sustainable urban transport development in China: Challenges and solutions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Xilang; Hu, Xiaojun

    2002-07-01

    This paper presents an overview of urban road transport development and challenges in energy consumption in China. It relates sustainable urban road transport development with energy consumption and environmental management. It analyzes the main challenges related to urban road transport development: energy security, low efficiency in energy utilization, and unsustainable environmental management. It also discusses necessary technological and policy initiatives to deal with these challenges: e.g., promoting the development and dissemination of cleaner vehicle technologies, substitution of LPG, CNG, LNG and bio fuels for gasoline and diesel, strengthening regulations on vehicle emissions, expediting public transport development, and the effective management of the soaring private cars. (author)

  18. The State of the Art Report on the Development and Manufacturing Technology of Test Blanket Module

    International Nuclear Information System (INIS)

    Lee, J. S.; Jeong, Y. H.; Park, S. Y.; Lee, M. H.; Choi, B. K.; Baek, J. H.; Park, J. Y.; Kim, J. H.; Kim, H. G.; Kim, K. H.

    2006-07-01

    The main objective of the present R and D on breeder blanket is the development of test blanket modules (TBMs) to be installed and tested in International Thermonuclear Experimental Reactor (ITER). In the program of the blanket development, a blanket module test in the ITER is scheduled from the beginning of the ITER operation, and the performance test of TBM in ITER is the most important milestone for the development of the DEMO blanket. The fabrication of TBMs has been required to test the basic performance of the DEMO blanket, i.e., tritium production/recovery, high-grade heat generation and radiation shielding. Therefore, the integration of the TBM systems into ITER has been investigated with the aim to check the safety, reliability and compatibility under nuclear fusion state. For this reason, in the Test Blanket Working Group (TBWG) as an activity of the International Energy Association (IEA), a variety of ITER TBMs have been proposed and investigated by each party: helium-cooled ceramic (WSG-1), helium-cooled LiPb (WSG-2), water-cooled ceramic (WSG-3), self-cooled lithium (WSG-4) and self-cooled molten salt (WSG-5) blanket systems. Because we are still deficient in investigation of TBM development, the need of development became pressing. In this report, for the development of TBM sub-module and mock-up, it is necessary to analyze and examine the state of the art on the development of manufacturing technology of TBM in other countries. And we will be applied as basic data to establish a manufacturing technology

  19. Development of Manufacturing Method of Highly Functional Material Gallic acid-CLA Ester Using Irradiation

    International Nuclear Information System (INIS)

    Cho, C. H.; Byun, M. W.; Jeong, I. Y.; Kim, D. H.

    2006-01-01

    Increasing interest and current trends for natural materials with various health beneficial functions by radiation (RT)-biotechnology (BT) fusion by developed countries. However, the information and development of new functional materials using the RT-BT fusion technology is still limited. The target material developed and manufactured by RT-BT fusion technology may have a multi-functional effect on human health and it can be applied for pharmaceutical materials as well as functional food ingredient. The market of functional new materials has been grown dramatically and a multi-functional material manufactured by RT-BT fusion technology may have a great economic impact for both the domestic and overseas market. Development of GA-CLA ester by chemical synthetic method. Transformation of linoleic acid to conjugated linoleic acid by irradiation. Identification and confirmation of the biological functions including antioxidative, cancer cell proliferation inhibition, anti-microbial, enhancement of immune response and lipid metabolism of GA-CLA ester. Increase industrial applicability of the new materials. Development of GA-CLA ester by chemical synthetic method(2 patents submitted). Development of the optimum methodology of GA-CLA and its derivative, octadeca-9,12-dienyl-3,4,5-trihydroxy benzoate). Identification and confirmation of biological activities of GA-CLA. Extramural funding from the Ministry of Commerce, Industry, and Energy subjected by gallic acid-fatty acid derivatives (205,000,000 Won). Provides the basic data for successful project 'Development of cosmeceutical and cosmetics using gallic acid fatty acid derivatives' funded by Ministry of Commerce, Industry, and Energy and collaboration with the Technology-invested venture company, SunBiotech, Co. and problem-solving for industrial application. Complete the patent procedure and publish the results to international or domestic peer-reviewed journals

  20. Urbanization, economic development and health: evidence from China's labor-force dynamic survey.

    Science.gov (United States)

    Chen, Hongsheng; Liu, Ye; Li, Zhigang; Xue, Desheng

    2017-11-29

    The frequent outbreak of environmental threats in China has resulted in increased criticism regarding the health effects of China's urbanization. Urbanization is a double-edged sword with regard to health in China. Although great efforts have been made to investigate the mechanisms through which urbanization influences health, the effect of both economic development and urbanization on health in China is still unclear, and how urbanization-health (or development-health) relationships vary among different income groups remain poorly understood. To bridge these gaps, the present study investigates the impact of both urbanization and economic development on individuals' self-rated health and its underlying mechanisms in China. We use data from the national scale of the 2014 China Labor-force Dynamics Survey to analyze the impact of China's urbanization and economic development on health. A total of 14,791 individuals were sampled from 401 neighborhoods within 124 prefecture-level cities. Multilevel ordered logistic models were applied. Model results showed an inverted U-shaped relationship between individuals' self-rated health and urbanization rates (with a turning point of urbanization rate at 42.0%) and a positive linear relationship between their self-rated health and economic development. Model results also suggested that the urbanization-health relationship was inverted U-shaped for high- and middle-income people (with a turning point of urbanization rate at 0.0% and 49.2%, respectively), and the development-health relationship was inverted U-shaped for high- and low-income people (with turning points of GDP per capita at 93,462 yuan and 71,333 yuan, respectively) and linear for middle-income people. The impact of urbanization and economic development on health in China is complicated. Careful assessments are needed to understand the health impact of China's rapid urbanization. Social and environmental problems arising from rapid urbanization and economic growth

  1. Development of Dimensionless Index Assessing Low Impact Development in Urban Areas

    Science.gov (United States)

    Jun, S. H.; Lee, E. H.; Kim, J. H.

    2017-12-01

    Because the rapid urbanization and industrialization have increased the impervious area of watersheds, inundation in urban area and water pollution of river by non-point pollutants have caused serious problems for a long time. Low Impact Development (LID) techniques have been implemented for the solution of these problems due to its cost effectiveness for mitigating the water quality and quantity impact on urban areas. There have been many studies about the effectiveness of LID, but there is a lack of research on developing an index for the assessment of LID performance. In this study, the dimensionless reliability index of LID is proposed. The index is developed using Distance Measure Method (DMM). DMM is used to consider the parameters that have different units. The parameters for reliability of LID are the amount of pollutant at the outfall and the flooding volume. Both parameters become dimensionless index by DMM. Weighted factors in dimensionless index are considered to realize the behavior of reliability for the variation of importance to the parameters. LID is applied to an actual area called Gasan city in Seoul, South Korea where inundation is frequently occurred. The reliability is estimated for 16 different rainfall events. For each rainfall event, the parameters with LID installation are compared with those of no LID installation. Depending on which parameter is considered more important, the results showed difference. In conclusion, the optimal locations of LID are suggested as the weighted factors change.

  2. Exploring barriers and opportunities in adopting crowdsourcing based new product development in manufacturing SMEs

    Science.gov (United States)

    Qin, Shengfeng; Van der Velde, David; Chatzakis, Emmanouil; McStea, Terry; Smith, Neil

    2016-10-01

    Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people (the `Crowd'). The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development (NPD) of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

  3. Development of coatings for ultrasonic additive manufacturing sonotrode using laser direct metal deposition process

    Energy Technology Data Exchange (ETDEWEB)

    Niyanth S, Niyanth [ORNL; Dehoff, Ryan R [ORNL; Jordan, Brian H [ORNL; Babu, Sudarsanam Suresh [ORNL

    2016-10-01

    ORNL partnered with Fabrisonic, LLC to develop galling resistant hard facing coatings on sonotrodes used to fabricate 3D printed materials using ultrasonic additive manufacturing. The development and deployment of a coated sonotrode is expected to push the existing state of the art to facilitate the solidstate additive manufacturing of hard steels and titanium alloys. To this effect a structurally amorphous stainless steel material and cobalt chrome material were deposited on the sonotrode material. Both the deposits showed good adhesion to the substrate. The coatings made using the structurally amorphous steel materials showed cracking during the initial trials and cracking was eliminated by deposition on a preheated substrate. Both the coatings show hardness in excess of 600 HVN. Thus the phase 1 of this project has been used to identify suitable materials to use to coat the sonotrode. Despite the fact that successful deposits were obtained, the coatings need to be evaluated by performing detailed galling tests at various temperatures. In addition field tests are also necessary to test the stability of these coatings in a high cycle ultrasonic vibration mode. If awarded, phase 2 of the project would be used to optimize the composition of the deposit material to maximize galling resistance. The industrial partner would then use the coated sonotrode to fabricate builds made of austenitic stainless steel to test the viability of using a coated sonotrode.

  4. Development of hybrid lifecycle cost estimating tool (HLCET) for manufacturing influenced design tradeoff

    Science.gov (United States)

    Sirirojvisuth, Apinut

    In complex aerospace system design, making an effective design decision requires multidisciplinary knowledge from both product and process perspectives. Integrating manufacturing considerations into the design process is most valuable during the early design stages since designers have more freedom to integrate new ideas when changes are relatively inexpensive in terms of time and effort. Several metrics related to manufacturability are cost, time, and manufacturing readiness level (MRL). Yet, there is a lack of structured methodology that quantifies how changes in the design decisions impact these metrics. As a result, a new set of integrated cost analysis tools are proposed in this study to quantify the impacts. Equally important is the capability to integrate this new cost tool into the existing design methodologies without sacrificing agility and flexibility required during the early design phases. To demonstrate the applicability of this concept, a ModelCenter environment is used to develop software architecture that represents Integrated Product and Process Development (IPPD) methodology used in several aerospace systems designs. The environment seamlessly integrates product and process analysis tools and makes effective transition from one design phase to the other while retaining knowledge gained a priori. Then, an advanced cost estimating tool called Hybrid Lifecycle Cost Estimating Tool (HLCET), a hybrid combination of weight-, process-, and activity-based estimating techniques, is integrated with the design framework. A new weight-based lifecycle cost model is created based on Tailored Cost Model (TCM) equations [3]. This lifecycle cost tool estimates the program cost based on vehicle component weights and programmatic assumptions. Additional high fidelity cost tools like process-based and activity-based cost analysis methods can be used to modify the baseline TCM result as more knowledge is accumulated over design iterations. Therefore, with this

  5. Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing.

    Science.gov (United States)

    Goyanes, Alvaro; Fina, Fabrizio; Martorana, Annalisa; Sedough, Daniel; Gaisford, Simon; Basit, Abdul W

    2017-07-15

    The aim of this study was to manufacture 3D printed tablets (printlets) from enteric polymers by single filament fused deposition modeling (FDM) 3D printing (3DP). Hot melt extrusion was used to generate paracetamol-loaded filaments from three different grades of the pharmaceutical excipient hypromellose acetate succinate (HPMCAS), grades LG, MG and HG. One-step 3DP was used to process these filaments into enteric printlets incorporating up to 50% drug loading with two different infill percentages (20 and 100%). X-ray Micro Computed Tomography (Micro-CT) analysis revealed that printlets with 20% infill had cavities in the core compared to 100% infill, and that the density of the 50% drug loading printlets was higher than the equivalent formulations loaded with 5% drug. In biorelevant bicarbonate dissolution media, drug release from the printlets was dependent on the polymer composition, drug loading and the internal structure of the formulations. All HPMCAS-based printlets showed delayed drug release properties, and in the intestinal conditions, drug release was faster from the printlets prepared with polymers with a lower pH-threshold: HPMCAS LG > HPMCAS MG > HPMCAS HG. These results confirm that FDM 3D printing makes it possible not only to manufacture delayed release printlets without the need for an outer enteric coating, but it is also feasible to adapt the release profile in response to the personal characteristics of the patient, realizing the full potential of additive manufacturing in the development of personalised dose medicines. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Optimizing Urban Material Flows and Waste Streams in Urban Development through Principles of Zero Waste and Sustainable Consumption

    Directory of Open Access Journals (Sweden)

    Steffen Lehmann

    2011-01-01

    designers, industrial designers, and so on. How must urban development and construction change and evolve to automatically embed sustainability in the way we design, build, operate, maintain and renew/recycle cities? One of the findings of this paper is that embedding zero-waste requires strong industry leadership, new policies and effective education curricula, as well as raising awareness (through research and education and refocusing research agendas to bring about attitudinal change and the reduction of wasteful consumption.

  7. Low-cost housing developments in South Africa miss the opportunities for household level urban greening

    NARCIS (Netherlands)

    Chackleton, C.; Hebinck, P.G.M.; Kaoma, M.; Chishaleshale, M.; Shackleton, S.; Gambiza, J.; Gumbo, D.

    2014-01-01

    Most developing countries of the world are experiencing large-scale migration from rural to urban areas. Many new migrants end up in low-cost or informal areas and slums with attendant environmental concerns. One dimension of improved urban sustainability is the provision of green spaces and trees.

  8. Development of an Interdisciplinary Workshop in Urban Transportation. Final Substantive Report.

    Science.gov (United States)

    Foa, Joseph V.

    This project has developed an interdisciplinary graduate workshop in transportation engineering to acquaint students with problems of urban transportation and the role of various disciplines in dealing with these problems. It provides an opportunity for students from the fields of engineering, urban and regional planning, and economics to interact…

  9. Controlling Urban Sprawl with Integrated Approach of Space-Transport Development Strategies

    NARCIS (Netherlands)

    Ambarwati, L.; Verhaeghe, R.; Pel, A.J.; Van Arem, B.

    2014-01-01

    Urban sprawl phenomenon has been a huge issue since 20th century characterized by a rapid and unbalanced settlement development with transportation network particularly in a suburban area. The improvement of public transport system is a major requirement to minimize urban sprawl. Academic

  10. Management of urban development : Example of the transformation of two Dutch former port areas

    NARCIS (Netherlands)

    Van Hoek, M.; Wigmans, G.

    2011-01-01

    The more traditional approach of developing cities through government lead town planning has been gradually shifting to a more entrepreneurial approach of strategic management of both public and private initiatives in the urban environment. This approach combines aspects of governance, urban

  11. Urbanism, Ecology and Sustainable development: The social production of the spaces

    International Nuclear Information System (INIS)

    Nogueira D, O.A.

    1998-01-01

    A review over social concepts as urbanism, ecology and production and their interrelationship are exposed. The importance over theoretical themes as sustainable development, and politics and spaces also are presented. Different problems that involve the urbanism as extension, services to provide, social fragmentation, planning, infrastructures, administration, rest areas, violence, commercial areas, neighborhood, architecture and impacts of immigrants are described

  12. Om SIDAs rapport: "Towards an urban world - urbanization and development assistance"

    DEFF Research Database (Denmark)

    Eskemose Andersen, Jørgen

    1996-01-01

    Byerne i ulandene har et dårligt ry. De er centre for prostitution, kriminalitet og arbejdsløshed. Befolkningerne lever i armod i elendige endeløse slumområder uden udsigt til forbedrede levevilkår. Byernes infrastruktur er mangelfuld, nedslidt og fungere stort set kun i de nedarvede koloniale de...... udkommet rapport: Towards an Urban World af den svenske bistandsorganisation Sida.   Udgivelsesdato: 1996...

  13. Conservation planning under uncertainty in urban development and vegetation dynamics

    Science.gov (United States)

    Carmel, Yohay

    2018-01-01

    Systematic conservation planning is a framework for optimally locating and prioritizing areas for conservation. An often-noted shortcoming of most conservation planning studies is that they do not address future uncertainty. The selection of protected areas that are intended to ensure the long-term persistence of biodiversity is often based on a snapshot of the current situation, ignoring processes such as climate change. Scenarios, in the sense of being accounts of plausible futures, can be utilized to identify conservation area portfolios that are robust to future uncertainty. We compared three approaches for utilizing scenarios in conservation area selection: considering a full set of scenarios (all-scenarios portfolio), assuming the realization of specific scenarios, and a reference strategy based on the current situation (current distributions portfolio). Our objective was to compare the robustness of these approaches in terms of their relative performance across future scenarios. We focused on breeding bird species in Israel’s Mediterranean region. We simulated urban development and vegetation dynamics scenarios 60 years into the future using DINAMICA-EGO, a cellular-automata simulation model. For each scenario, we mapped the target species’ available habitat distribution, identified conservation priority areas using the site-selection software MARXAN, and constructed conservation area portfolios using the three aforementioned strategies. We then assessed portfolio performance based on the number of species for which representation targets were met in each scenario. The all-scenarios portfolio consistently outperformed the other portfolios, and was more robust to ‘errors’ (e.g., when an assumed specific scenario did not occur). On average, the all-scenarios portfolio achieved representation targets for five additional species compared with the current distributions portfolio (approximately 33 versus 28 species). Our findings highlight the importance

  14. Impact of urbanization and industrial development on holiday effect

    Science.gov (United States)

    Tan, P.-H.; Chen, P.-Y.

    2012-04-01

    Our study is to examine the "holiday effect", defined as the difference in air pollutant concentrations between holiday and non-holiday periods, and associated factors controlling the strength of holiday effect in Taiwan. This holiday effect can be applied to other countries with similar national or cultural holidays. Daily surface measurements of six major air pollutants from fifty-four air quality monitoring stations of the Taiwan Environmental Protection Administration (TEPA) during the Chinese New Year (CNY) and non-Chinese New Year (NCNY) periods of 1994-2008 are used. The air pollutant concentrations are significantly different between the CNY and NCNY periods, in almost all the Taiwan area, except CO in the eastern part which is a relatively less-developed area. The strengths of holiday effects of NOx, CO, NMHC and O3 are larger in the north than in the south, and those of SO2 and PM10 are larger in the south than in the north. Factors controlling the strength of holiday effect such as the degree of urbanization and anthropogenic sources are examined. The population number and motor vehicle number rather than the population number density and motor vehicle number density have a significantly positive relationship with the strengths of holiday effects of NOx, CO and NMHC. The strengths of holiday effects of NOx and CO are mainly contributed from mobile sources and those of SO2 and PM10 are from stationary sources and that of NMHC is from both mobile and stationary sources. As the dominant anthropogenic sources in the air quality division have larger emissions, holiday effect strengths of associated air pollutants are found to be stronger.

  15. Development of a new bioprocess scheme using frozen seed train intermediates to initiate CHO cell culture manufacturing campaigns.

    Science.gov (United States)

    Seth, Gargi; Hamilton, Robert W; Stapp, Thomas R; Zheng, Lisa; Meier, Angela; Petty, Krista; Leung, Stephenie; Chary, Srikanth

    2013-05-01

    Agility to schedule and execute cell culture manufacturing campaigns quickly in a multi-product facility will play a key role in meeting the growing demand for therapeutic proteins. In an effort to shorten campaign timelines, maximize plant flexibility and resource utilization, we investigated the initiation of cell culture manufacturing campaigns using CHO cells cryopreserved in large volume bags in place of the seed train process flows that are conventionally used in cell culture manufacturing. This approach, termed FASTEC (Frozen Accelerated Seed Train for Execution of a Campaign), involves cultivating cells to high density in a perfusion bioreactor, and cryopreserving cells in multiple disposable bags. Each run for a manufacturing campaign would then come from a thaw of one or more of these cryopreserved bags. This article reviews the development and optimization of individual steps of the FASTEC bioprocess scheme: scaling up cells to greater than 70 × 10(6) cells/mL and freezing in bags with an optimized controlled rate freezing protocol and using a customized rack configuration. Flow cytometry analysis was also employed to understand the recovery of CHO cells following cryopreservation. Extensive development data were gathered to ensure that the quantity and quality of the drug manufactured using the FASTEC bioprocess scheme was acceptable compared to the conventional seed train process flow. The result of offering comparable manufacturing options offers flexibility to the cell culture manufacturing network. Copyright © 2012 Wiley Periodicals, Inc.

  16. Creativity and Culture as Elements of Urban Development

    Directory of Open Access Journals (Sweden)

    Fabiane Frois B Weiler

    2018-02-01

    Full Text Available Abstract: cities are the picture of the outbreak of expressions of the processes of accumulation, consumption, circulation and production of goods plus the interaction of individuals, socially represented in classes. In general, from the adjectives and their derivations a city is constructed that articulates through its actors in constructing itself locally viable. From this perspective, this essay aims to analyze, briefly, the relations between urban development and creative economy. For this, methodologically, it is worth of a bibliographical revision about the fundamental concepts of the urban development and creative economy and repercussions of this relation. In this line, it is thought that the city when it uses creativity as an adjective must be conceived in a logic of space built to meet the particularities of the territory. And, not for the logic of competition and standardization of territory designed for global competition. The purpose of culture and creativity must break with dependence in the context of development, especially as regards the way and process as the city and its urbanization are constituted and consolidated. A Criatividade e a Cultura como Elementos do Desenvolvimento Urbano Resumo: as cidades são o retrato da eclosão das expressões dos processos de acumulação, consumo, circulação e produção de bens somados a interação de indivíduos, socialmente representados em classes. Em geral, a partir dos adjetivos e suas derivações se constrói uma cidade que se articula por meio de seus atores em construir-se viável localmente. Nessa perspectiva, este ensaio visa analisar, sucintamente, as relações entre desenvolvimento urbano e economia criativa. Para tal, metodologicamente, vale-se de uma revisão bibliográfica acerca dos conceitos fundamentais do desenvolvimento urbano e economia criativa e repercussões dessa relação. Nessa linha, pensa-se que a cidade quando emprega a criatividade como adjetivo deve ser

  17. Stimuli of Collaboration in Product Development: A Case Study in a Project Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Jääskeläinen Aki

    2017-12-01

    Full Text Available There is already a wide acceptance on the importance of involving supplier and customer companies in product development. Decent understanding prevails on the relationship-oriented approach to product development including various collaboration forms. However, there is less research on the factors explaining the decision of attending to joint product development. In addition, less studies have examined the integrated role of both suppliers and customers in product development initiatives. This study searches answers to the following research questions: 1. What is the role of different actors in product development initiatives? 2. What factors motivate suppliers and customers to participate in product development? The research is carried out as an in-depth qualitative single case study in a large project manufacturing company. It takes the perspective of a focal company striving for product improvements. The first part of the empirical study consists of 15 semi-structured interviews. The second part includes two discursive workshops and builds upon the results of the interviews. This study contributes to the existing research by explaining the challenges and conditions facilitating joint product development with supplier and purchaser companies. The results highlight the role of customers in improving the effectiveness of product development. As a practical contribution, the paper reports the application of workshop method as a facilitator of collaboration between supplier, purchaser (focal company and customer companies.

  18. Development, manufacturing and testing of a gas-loaded variable conductance methanol heat pipe

    Science.gov (United States)

    Vanbuggenum, R. I. J.; Daniels, D. H. W.

    1987-02-01

    The experimental technology required to measure the performance of moderate temperature heat pipes is presented. The heat pipe manufacturing process is described. The hydrodynamic characteristics of the porous structure inside the heat pipe envelope were examined using a specially developed test rig, based upon a steady-state evaporation test. A fully automated test facility was developed and validated by testing constant conductance and variable conductance heat pipes (VCHP). Theoretical performance predictions are illustrated in terms of pressure, depicted in 3D-plots, and compared with the test results of the heat pipe performance tests. The design of the VCHP was directed towards the verification of the VCHP mathematical model. The VCHP design is validated and ready for the final testing and model verification.

  19. Supercritical fluid chromatography for GMP analysis in support of pharmaceutical development and manufacturing activities.

    Science.gov (United States)

    Hicks, Michael B; Regalado, Erik L; Tan, Feng; Gong, Xiaoyi; Welch, Christopher J

    2016-01-05

    Supercritical fluid chromatography (SFC) has long been a preferred method for enantiopurity analysis in support of pharmaceutical discovery and development, but implementation of the technique in regulated GMP laboratories has been somewhat slow, owing to limitations in instrument sensitivity, reproducibility, accuracy and robustness. In recent years, commercialization of next generation analytical SFC instrumentation has addressed previous shortcomings, making the technique better suited for GMP analysis. In this study we investigate the use of modern SFC for enantiopurity analysis of several pharmaceutical intermediates and compare the results with the conventional HPLC approaches historically used for analysis in a GMP setting. The findings clearly illustrate that modern SFC now exhibits improved precision, reproducibility, accuracy and robustness; also providing superior resolution and peak capacity compared to HPLC. Based on these findings, the use of modern chiral SFC is recommended for GMP studies of stereochemistry in pharmaceutical development and manufacturing. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. The Development Of A Theoretical Lean Culture Causal Framework To Support The Effective Implementation Of Lean In Automotive Component Manufacturers

    Directory of Open Access Journals (Sweden)

    Van der Merwe, Karl Robert

    2014-05-01

    Full Text Available Although it is generally accepted that lean manufacturing improves operational performance, many organisations are struggling to adapt to the lean philosophy. The purpose of this study is to contribute to a more effective strategy for implementing the lean manufacturing improvement philosophy. The study sets out both to integrate well-researched findings and theories related to generic organisational culture with more recent research and experience related to lean culture, and to examine the role that culture plays in the effective implementation of lean manufacturing principles and techniques. The ultimate aim of this exercise is to develop a theoretical lean culture causal framework.

  1. Developing an Innovative and Creative Hands-on Lean Six Sigma Manufacturing Experiments for Engineering Education

    Directory of Open Access Journals (Sweden)

    I. Badawi

    2016-12-01

    Full Text Available The goal of this study was to develop an innovative and creative hands-on project based on Lean Six Sigma experiments for engineering education at the College of Engineering at the University of Hail. The exercises were designed using junction box assembly to meet the following learning outcomes: 1-to provide students with solid experience on waste elimination and variation reduction and 2-to engage students in exercises related to assembly line mass production and motion study. To achieve these objectives, students were introduced to the principles of Lean manufacturing and Six Sigma through various pedagogical activities such as classroom instruction, laboratory experiments, hands-on exercises, and interactive group work. In addition, Minitab 17 statistical package and Quality Companion 3 software were used to facilitate The Lean Six Sigma exercises. The software application and hands-on manufacturing assembly were found to be extremely valuable in giving students the chance to identify which variables to control in order to minimize variation and eliminate waste. This research was funded by a grant from the Deanship of Academic Research at University of Hail for project number E-26-IC, and under the umbrella of Ministry of Education within the framework of the National Initiative on Creativity and Innovation in Saudi Universities at University of Hail.

  2. Development of an Adaptive Forecasting System: A Case Study of a PC Manufacturer in South Korea

    Directory of Open Access Journals (Sweden)

    Chihyun Jung

    2016-03-01

    Full Text Available We present a case study of the development of an adaptive forecasting system for a leading personal computer (PC manufacturer in South Korea. It is widely accepted that demand forecasting for products with short product life cycles (PLCs is difficult, and the PLC of a PC is generally very short. The firm has various types of products, and the volatile demand patterns differ by product. Moreover, we found that different departments have different requirements when it comes to the accuracy, point-of-time and range of the forecasts. We divide the demand forecasting process into three stages depending on the requirements and purposes. The systematic forecasting process is then introduced to improve the accuracy of demand forecasting and to meet the department-specific requirements. Moreover, a newly devised short-term forecasting method is presented, which utilizes the long-term forecasting results of the preceding stages. We evaluate our systematic forecasting methods based on actual sales data from the PC manufacturer, where our forecasting methods have been implemented.

  3. Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

    Science.gov (United States)

    Srinivas, G.; Raghunandana, K.; Satish Shenoy, B.

    2018-02-01

    In the recent years the development of turbomachinery materials performance enhancement plays a vital role especially in aircraft air breathing engines like turbojet engine, turboprop engine, turboshaft engine and turbofan engines. Especially the transonic flow engines required highly sophisticated materials where it can sustain the entire thrust which can create by the engine. The main objective of this paper is to give an overview of the present cost-effective and technological capabilities process for turbomachinery component materials. Especially the main focus is given to study the Electro physical, Photonic additive removal process and Electro chemical process for turbomachinery parts manufacture. The aeronautical propulsion based technologies are reviewed thoroughly where in surface reliability, geometrical precession, and material removal and highly strengthened composite material deposition rates usually difficult to cut dedicated steels, Titanium and Nickel based alloys. In this paper the past aeronautical and propulsion mechanical based manufacturing technologies, current sophisticated technologies and also future challenging material processing techniques are covered. The paper also focuses on the brief description of turbomachinery components of shaping process and coating in aeromechanical applications.

  4. The development of tool manufacture in humans: what helps young children make innovative tools?

    Science.gov (United States)

    Chappell, Jackie; Cutting, Nicola; Apperly, Ian A; Beck, Sarah R

    2013-11-19

    We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an 'ill-structured problem'. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals.

  5. The development of tool manufacture in humans: what helps young children make innovative tools?

    Science.gov (United States)

    Chappell, Jackie; Cutting, Nicola; Apperly, Ian A.; Beck, Sarah R.

    2013-01-01

    We know that even young children are proficient tool users, but until recently, little was known about how they make tools. Here, we will explore the concepts underlying tool making, and the kinds of information and putative cognitive abilities required for children to manufacture novel tools. We will review the evidence for novel tool manufacture from the comparative literature and present a growing body of data from children suggesting that innovation of the solution to a problem by making a tool is a much more challenging task than previously thought. Children's difficulty with these kinds of tasks does not seem to be explained by perseveration with unmodified tools, difficulty with switching to alternative strategies, task pragmatics or issues with permission. Rather, making novel tools (without having seen an example of the required tool within the context of the task) appears to be hard, because it is an example of an ‘ill-structured problem’. In this type of ill-structured problem, the starting conditions and end goal are known, but the transformations and/or actions required to get from one to the other are not specified. We will discuss the implications of these findings for understanding the development of problem-solving in humans and other animals. PMID:24101620

  6. Sustaining Regional Advantages in Manufacturing: Skill Accumulation of Rural–Urban Migrant Workers in the Coastal Area of China

    Directory of Open Access Journals (Sweden)

    Huasheng Zhu

    2017-01-01

    Full Text Available Extant research pays little attention to unorganized migrant workers’ skill accumulation/upgrading from the perspective of the labor supply. This paper takes China as an example to explore the factors influencing the skill accumulation of rural–urban migrant workers (RUMWs, with the purpose of discovering how to sustain or reshape regional competitive advantages by improving RUMWs’ skill accumulation. Structured questionnaire surveys were adopted for data collection in Suzhou City, Jiangsu Province and Taizhou City, Zhejiang Province located in the Yangtze River Delta in eastern China. In total, 700 questionnaires were issued and 491 effective questionnaires were recovered. It takes the perspective of individual laborers, with special regard to the effects of localization on the laborers’ skill accumulation within the context of globalization. It adopts a broad viewpoint including intra-firm skill-biased strategy (as a response to intense competition, inter-firm relationships, and the accessibility of local non-firm organizations. The findings indicate that firms’ skill preference, which impacts employees’ skills and innovation ability and stimulates them to learn with initiative, have a significant influence on RUMWs’ skill accumulation. In terms of collective efficiency based on the co-competitive relationship between local firms, the more intensive interactions are, the more opportunities RUMWs are afforded for skill accumulation. The accessibility of local institutions and favorable policies also benefit RUMWs’ skill accumulation. In addition, the place itself, as a synthesized space of a firm’s internal labor-management relations and inter-organizational relations, also exerts an influence on and causes regional differences in RUMWs’ skill accumulation.

  7. Research on assessment methods for urban public transport development in China.

    Science.gov (United States)

    Zou, Linghong; Dai, Hongna; Yao, Enjian; Jiang, Tian; Guo, Hongwei

    2014-01-01

    In recent years, with the rapid increase in urban population, the urban travel demands in Chinese cities have been increasing dramatically. As a result, developing comprehensive urban transport systems becomes an inevitable choice to meet the growing urban travel demands. In urban transport systems, public transport plays the leading role to promote sustainable urban development. This paper aims to establish an assessment index system for the development level of urban public transport consisting of a target layer, a criterion layer, and an index layer. Review on existing literature shows that methods used in evaluating urban public transport structure are dominantly qualitative. To overcome this shortcoming, fuzzy mathematics method is used for describing qualitative issues quantitatively, and AHP (analytic hierarchy process) is used to quantify expert's subjective judgment. The assessment model is established based on the fuzzy AHP. The weight of each index is determined through the AHP and the degree of membership of each index through the fuzzy assessment method to obtain the fuzzy synthetic assessment matrix. Finally, a case study is conducted to verify the rationality and practicability of the assessment system and the proposed assessment method.

  8. The Effects of Domestic Energy Consumption on Urban Development Using System Dynamics

    Science.gov (United States)

    Saryazdi, M. D.; Homaei, N.; Arjmand, A.

    2018-05-01

    In developed countries, people have learned to follow efficient consumption patterns, while in developing countries, such as Iran, these patterns are not well executed. A large amount of energy is almost consumed in buildings and houses and though the consumption patterns varies in different societies, various energy policies are required to meet the consumption challenges. So far, several papers and more than ten case studies have worked on the relationship between domestic energy consumption and urban development, however these researches did not analyzed the impact of energy consumption on urban development. Therefore, this paper attempts to examine the interactions between the energy consumption and urban development by using system dynamics as the most widely used methods for complex problems. The proposed approach demonstrates the interactions using causal loop and flow diagrams and finally, suitable strategies will be proposed for urban development through simulations of different scenarios.

  9. Investment Constraints in Urban Regeneration: Property Developers and Local Authorities Perspective

    Directory of Open Access Journals (Sweden)

    Mohamed Nurulanis Ahmad

    2016-01-01

    Full Text Available Urban decay is a phenomenon created due to the expansion of urban population, the restructuring of industrial, social composition as well as the deterioration of urban areas. Consequently this will increase issues of crime, mass unemployment, low quality in urban services, social problems etc. Thus urban regeneration is a tool used to overcome all these issues in order to create quality of urban living, diversify and vibrant cities. However, the involvement of investment in urban regeneration is still infancy in Malaysia as compared to other countries such as Australia, UK, Hong Kong, and etc. This is due to the perception of investors towards the profit generation and the risk involve. The objective of this paper is to determine the constraints involved in urban regeneration investment from the perspectives of the property developer companies and the local authorities. The method used is an exploratory with primary data collection through a questionnaire survey. The findings revealed that the main constraints is in regards of the land issues as well as high cost of investment, however, the benefits gain should also be considered as this create a livable urban living.

  10. Model of urban poverty alleviation through the development of entrepreneurial spirit and business competence

    Science.gov (United States)

    Aryaningsih, NN; Irianto, Kt; Marsa Arsana, Md; Juli Suarbawa, Kt

    2018-01-01

    The rapid increased of urban population can not be controlled by the city government. This will have an impact on the emergence of new poverty in urban areas, due to inadequate of the job opportunities and skills. Government programs for poverty alleviation can reduce some rural poverty, but have not been able to overcome poverty in urban areas. The diversity of urban issues and needs is greater than in rural areas. Therefore, it is necessary to conduct the research with the aim to build urban poverty reduction model through the development of entrepreneurship spirit and business competence. This research was conducted by investigation method, and questionnaire. Questionnaires are arranged with rating scale measurements. The validity and reliability of the questionnaire were tested by factor analysis. Model construction is constructed from various informant analyzes and descriptive statistical analysis. The results show that poverty alleviation model is very effective done by developing spirit of entrepreneurship and business competence.

  11. The Power of Micro Urban Structures, Theory of EEPGC - the Micro Urban Energy Distribution Model as a Planning Tool for Sustainable City Development

    Directory of Open Access Journals (Sweden)

    Tkáč Štefan

    2015-11-01

    Full Text Available To achieve the smart growth and equitable development in the region, urban planners should consider also lateral energies represented by the energy urban models like further proposed EEPGC focused on energy distribution via connections among micro-urban structures, their onsite renewable resources and the perception of micro-urban structures as decentralized energy carriers based on pre industrialized era. These structures are still variously bound when part of greater patterns. After the industrial revolution the main traded goods became energy in its various forms. The EEPGC is focused on sustainable energy transportation distances between the villages and the city, described by the virtual “energy circles”. This more human scale urbanization, boost the economy in micro-urban areas, rising along with clean energy available in situ that surely gives a different perspective to human quality of life in contrast to overcrowded multicultural mega-urban structures facing generations of problems and struggling to survive as a whole.

  12. The Power of Micro Urban Structures, Theory of EEPGC - the Micro Urban Energy Distribution Model as a Planning Tool for Sustainable City Development

    Science.gov (United States)

    Tkáč, Štefan

    2015-11-01

    To achieve the smart growth and equitable development in the region, urban planners should consider also lateral energies represented by the energy urban models like further proposed EEPGC focused on energy distribution via connections among micro-urban structures, their onsite renewable resources and the perception of micro-urban structures as decentralized energy carriers based on pre industrialized era. These structures are still variously bound when part of greater patterns. After the industrial revolution the main traded goods became energy in its various forms. The EEPGC is focused on sustainable energy transportation distances between the villages and the city, described by the virtual "energy circles". This more human scale urbanization, boost the economy in micro-urban areas, rising along with clean energy available in situ that surely gives a different perspective to human quality of life in contrast to overcrowded multicultural mega-urban structures facing generations of problems and struggling to survive as a whole.

  13. Children Researching Their Urban Environment: Developing a Methodology

    Science.gov (United States)

    Hacking, Elisabeth Barratt; Barratt, Robert

    2009-01-01

    "Listening to children: environmental perspectives and the school curriculum" (L2C) was a UK research council project based in schools in a socially and economically deprived urban area in England. It focused on 10/12 year old children's experience of their local community and environment, and how they made sense of this in relation both…

  14. Translating measures of sustainable development to urban districts of Copenhagen

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Jensen, Jesper Ole

    2010-01-01

    overviews on the current baselines as well as stages in a transition process. The Dutch tool DPL (Dutch acronym for Duurzaamheid Prestatie voor een Locatie, ‘Sustainability-Profile for locations’) is a tool for mapping sustainability profiles of urban districts through a set of environmental, social...

  15. Growing Better Cities: Urban Agriculture for Sustainable Development

    International Development Research Centre (IDRC) Digital Library (Canada)

    As the cities grow, so does the number of urban poor. ... Case studies: ... It describes the growth of city networks in Africa and Latin America that focus on ... partners will showcase critical work on adaptation and resilience in hot spot regions.

  16. Sustainable Urban Transport in the Developing World : Beyond Megacities

    NARCIS (Netherlands)

    Pojani, D.; Stead, D.

    2015-01-01

    Megacities have frequently received a disproportionate amount of attention over other sizes of cities in recent discourse on urban sustainability. In this article, the authors argue that a focus on smaller and medium-sized cities is crucial to achieving substantial progress towards more sustainable

  17. The impact of urbanization and agricultural development on vultures ...

    African Journals Online (AJOL)

    The methodology uses point count surveys of vulture species density along an urban to forest gradient (dense downtown areas, suburbs, rural villages and farms, mixed uninhabited savanna, open and closed forests). The very common Black Vulture and the slightly less common Turkey Vulture were most often recorded in ...

  18. CONTEMPORARY FORMAT OF TARGET-ORIENTED URBAN DEVELOPMENT PROGRAMS

    Directory of Open Access Journals (Sweden)

    Yaskova Natalya Yurevna

    2012-10-01

    In the context accepted by the authors, attainment of the above objective will involve fulfillment of each of the aforementioned requirements. They are to assure the concentration of resources and comprehensive satisfaction of the needs of the urban population in terms of the most popular items of real estate within a particular time span.

  19. The impact of urbanization and agricultural development on vultures ...

    African Journals Online (AJOL)

    Campbell Murn

    along an urban to forest gradient (dense downtown areas, suburbs, rural villages and farms ... negatively on many species, including .... landuse, this having more animals ..... behavior of black and turkey vultures: implications for reducing bird– .... Brazil: species richness and abundance and the influence of the survey.

  20. Urban ecology in a developing world: why advanced socioecological theory needs Africa

    OpenAIRE

    McHale, Melissa R; Bunn, David N; Pickett, Steward TA; Twine, Wayne

    2013-01-01

    Socioecological theory, developed through the study of urban environments, has recently led to a proliferation of research focusing on comparative analyses of cities. This research emphasis has been concentrated in the more developed countries of the Northern Hemisphere (often referred to as the “Global North”), yet urbanization is now occurring mostly in the developing world, with the fastest rates of growth in sub-Saharan Africa. Countries like South Africa are experiencing a variety of lan...