WorldWideScience

Sample records for unlimited edition prints

  1. Online press: The relations between the content in print and online editions of daily newspapers

    Bajić Predrag

    2017-01-01

    Full Text Available The purpose of this article is to observe the connection between the same content in the print editions of daily newspapers in Serbia and on their web portals, i.e. the changes that occur in the digital world as compared to the 'static' content that can be seen on paper (text and photos. In the digital era, the newspapers is struggling to retain considerable influence and manages to do so through synchronization, promotion and transfer of media contents from one platform to another. At present, we see the attempts to maintain exclusivity of content in newspapers, as much as possible, just by promoting it on a web portal (through a single photograph or some previews of the whole text. They serve as 'bait' in an effort to increase interest for buying the newspapers. Also, unlike the situation with the print, the placement of the same contents on portals can be enriched by adding multimedia elements. There we encounter a 'paradox', i.e. the fact that on the internet, where space is practically unlimited, we have a shortening of the textual parts due to the explications that can be obtained through multimedia contents and links. On the other hand, that is impossible in the case of print, where a longer text is required, although there are clear spatial limitations. No matter the advantages of multimedia enrichments, there we also find a distinctive 'trap', in terms that there is a possibility that the content disappears. With print, where we do not have 'half-finished' product and the contents cannot change once printed, there is no such risk. Further, the digital age gave the print media a possibility to generate, transmit and distribute exclusive audio-visual content.

  2. 'Transatlantic Print Culture, 1880-1940: Emerging Media, Emerging Modernisms', edited by Ann Ardis and Patrick Collier

    Janet Floyd

    2009-11-01

    Full Text Available A review of 'Transatlantic Print Culture, 1880-1940: Emerging Media, Emerging Modernisms', edited by Ann Ardis and Patrick Collier (London: Palgrave Macmillan, 2008. Hardback, 259 pages, £50, ISBN 9780554269.

  3. Bindings and covers of Cyrillic old printed editions of Holy Dormition Pochayiv Lavra publishing house

    Zheleznyak O.

    2014-01-01

    Full Text Available The article observes bindings and covers of Holy Dormition Pochayiv monastery publishing house editions. On the basis of copies from V. Vernadsky National Library of Ukraine fonds the covering material and decoration (centerpieces, ornaments, corner pieces of Pochayiv editions covers are analyzed. Besides that, distinctive features of Pochaiv publishing house bindings and covers are defined and described. Description of bindings enabled us to find bookbinder’s chiches, which had often been put on bottom endleafs. Special attention in the article is paid to highly artistic decoration of Pochayiv publishing house bindings of Altar Gospels. In the eighties of 18th century Pochayiv publishing house printed books, ordered by Old Believers. As a rule Old Believers editions derive all their compositional elements from books of 17th century, published before the reform. Bindings of Pochayiv Old Believers editions, distinctive for its modest decoration, are not exception of this rule. Besides that, Pochayiv old printed books were sometimes binded in covers made by Kyiv Pechersk Lavra craftsmen. Centerpieces of these covers sometimes contain the image of Kyiv Holy Dormition cathedral.

  4. The public perception of the print and electronic newspapers and magazines editions: Case of Serbia

    Perić Nenad

    2017-01-01

    Full Text Available Complex research in the field of print and electronic media and relations preference towards them has been non-existent in Serbia, so the paper aims to provide initial guidance in this regard. An instrument (questionnaire was formulated for the purposes of this study and used for measuring respondents' assessment of strengths and weaknesses of the print or electronic media. The research was conducted at the national level in Serbia, with a large number of respondents (432, using a number of different variables on the Likert scale. Respondents evaluated a total of ten items pertaining to different aspects of the advantages and disadvantages of print and electronic editions. The results can be of great importance to the media and other participants in the advertising industry-advertising agencies and advertisers. The scientific contribution of this paper is shown in the initial data the researchers gained in the fields of the media, marketing and advertising, regarding the perception of the print and electronic newspapers and magazines editions in Serbia.

  5. On unlimited frontiers

    Graham, J.

    1985-01-01

    The political system in the United States in unique because our forefathers planned it that way. Unfortunately, this uniqueness does not always serve the interest of those who advocate large nuclear-power facilities and fuel-cycle activities involving reprocessing and breeder reactors. The influence of various political systems on the viability of the nuclear-power option is discussed. As it faces the future, the U.S. nuclear community is divided over its most appropriate courses of action. The current administration is supportive in words if not in deeds, but it is ideologically opposed to advocating the conditions needed for a thriving nuclear industry based on large light water reactors. Will the U.S. enter the new century with ''unlimited frontiers'' in many new nuclear plant designs, or will some major shift in public opinion bring back political conditions that are more compatible with large LWR facilities. This is the $64,000 question confronting the nuclear industry, which must be prepared for any eventuality. The best chance for the U.S. to regain worldwide superiority in nuclear power-technology may lie in our ability to make rapid adjustments and to offer new and advanced machines that best fit utility needs and the political conditions of their own time

  6. Digital Inkjet Textile Printing

    Wang, Meichun

    2017-01-01

    Digital inkjet textile printing is an emerging technology developed with the rise of the digital world. It offers a possibility to print high-resolution images with unlimited color selection on fabrics. Digital inkjet printing brings a revolutionary chance for the textile printing industry. The history of textile printing shows the law how new technology replaces the traditional way of printing. This indicates the future of digital inkjet textile printing is relatively positive. Differen...

  7. Copies of editions from V. Vernadsky National Library of Ukraine Old Printed and Rare Editions Department fonds, not mentioned in «Svodnyi catalog knig na inostrannyh yazykah, izdannyh v Rossii v XVIII veke»

    Rudakova Y.

    2014-01-01

    Full Text Available «Svodnyi catalog knig na inostrannyh yazykah, izdannyh v Rossii v XVIII veke (1701-1800» is the first and currently the only bibliographic index of books in foreign languages, printed in Russian Empire typographies in the 18th century. The catalogue was arranged on the basis of fonds of 14 major libraries of former USSR, including the contemporary V. Vernadsky National Library of Ukraine. However, a number of books, not mentioned in the catalogue in question, were found in the fonds of Old Printed and Rare Editions Department of V. Vernadsky National Library of Ukraine. Also a list of editions, which descriptions in the catalogue need to be completed or corrected, was composed. This information will be reflected in the fifth volume of the catalogue that is being prepared for publication in the Library of the Russian Academy of Sciences. The article intends to inform about these additions. They are displayed by two lists. The first list contains numbers of editions, which descriptions in the catalogue are to be improved. The second list contains editions from the fonds of V. Vernadsky National Library of Ukraine Old Printed and Rare Editions Department, which are not mentioned in the catalogue. The lists of additions are supplemented with brief characteristics of the catalogue.

  8. Unlimited Relativistic Shock Surfing Acceleration

    Ucer, D.; Shapiro, V. D.

    2001-01-01

    Nonrelativistic shock surfing acceleration at quasiperpendicular shocks is usually considered to be a preacceleration mechanism for slow pickup ions to initiate diffusive shock acceleration. In shock surfing, the particle accelerates along the shock front under the action of the convective electric field of the plasma flow. However, the particle also gains kinetic energy normal to the shock and eventually escapes downstream. We consider the case when ions are accelerated to relativistic velocities. In this case, the ions are likely to be trapped for infinitely long times, because the energy of bounce oscillations tends to decrease during acceleration. This suggests the possibility of unlimited acceleration by shock surfing

  9. 47 CFR 73.1710 - Unlimited time.

    2010-10-01

    ... 47 Telecommunication 4 2010-10-01 2010-10-01 false Unlimited time. 73.1710 Section 73.1710 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Rules Applicable to All Broadcast Stations § 73.1710 Unlimited time. Operation is permitted 24 hours a...

  10. Remote Collaborative 3D Printing - Process Investigation

    2016-04-01

    COLLABORATIVE 3D PRINTING - PROCESS INVESTIGATION Cody M. Reese, PE CAD MODEL PRINT MODEL PRINT PREVIEW PRINTED PART AERIAL VIRTUAL This...REMOTE COLLABORATIVE 3D PRINTING - PROCESS INVESTIGATION 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Cody M. Reese...release; distribution is unlimited. 13. SUPPLEMENTARY NOTES 14. ABSTRACT The Remote Collaborative 3D Printing project is a collaboration between

  11. MOTIVATIONAL LEXICON IN ANTHONY ROBBINS’ UNLIMITED POWER

    Nur Faidatun Naimah

    2016-12-01

    Full Text Available In the language learning process, motivation, one of psychological factors, has a great role in endorsing students to be a successful learner. Based on the issues, the choice of words that can influence the students to do the best is practically required by the teachers. So that, teacher as a motivator has a power to influence the students to take action for achieving their excellent learning, using what Anthony Robbins suggest on his book; Unlimited Power. The writer formulated the aims of this study as follow; (1 to identify the motivational lexicons in Unlimited Power from the psychological perspective, and (2 to describe how motivational lexicons in Unlimited Power take apart in the pedagogical field. This research used qualitative research to find out the data. The data analysis technique that researcher used is content analysis since they were texts in Unlimited Power. Researcher found three motivational lexicons used by Anthony Robbins in his book Unlimited Power; think, challenge, and remember. Think used as a tool to lead his readers to come to their memory, re-identify some main points, and consider about the certain thing. Challenge used to pump readers’ emotion, gave a test, and invited them to take action. Remember used as a tool to bring back a piece of information he provided before and try to keep it in readers’ mind. Anthony’s motivational lexicons in Unlimited Power also can use in the pedagogical field. Teacher can use them in the teaching-learning process as it determines the effectiveness of rewards for what students do and apparently influential factor for learning process.

  12. Motivational Lexicon in Anthony Robbins’ Unlimited Power

    Nur Faidatun Naimah

    2016-12-01

    Full Text Available In the language learning process, motivation, one of psychological factors, has a great role in endorsing students to be a successful learner. Based on the issues, the choice of words that can influence the students to do the best is practically required by the teachers. So that, teacher as a motivator has a power to influence the students to take action for achieving their excellent learning, using what Anthony Robbins suggest on his book; Unlimited Power. The writer formulated the aims of this study as follow; (1 to identify the motivational lexicons in Unlimited Power from the psychological perspective, and (2 to describe how motivational lexicons in Unlimited Power take apart in the pedagogical field. This research used qualitative research to find out the data. The data analysis technique that researcher used is content analysis since they were texts in Unlimited Power. Researcher found three motivational lexicons used by Anthony Robbins in his book Unlimited Power; think, challenge, and remember. Think used as a tool to lead his readers to come to their memory, re-identify some main points, and consider about the certain thing. Challenge used to pump readers’ emotion, gave a test, and invited them to take action. Remember used as a tool to bring back a piece of information he provided before and try to keep it in readers’ mind. Anthony’s motivational lexicons in Unlimited Power also can use in the pedagogical field. Teacher can use them in the teaching-learning process as it determines the effectiveness of rewards for what students do and apparently influential factor for learning process.

  13. Fishing Facts Unlimited. Enterprise: Man & Technology.

    Southern Illinois Univ., Carbondale. Dept. of Technical and Industrial Education.

    Fishing Facts Unlimited, a student conducted enterprise in Technical and Industrial Education at Southern Illinois University, Carbondale has been a very successful operation, both financially and in providing a community service. The service provided by the enterprise was the production and sales of a 48-page fishing guide to Southern Illinois.…

  14. UNLIMITED I, On the corporate training revolution

    Leandro Adolfo Viltard

    2017-09-01

    Full Text Available The unlimited is a borderless territory where the whole world is inmerse. In this study, it is shown that the unlimited is present in education and, specifically, in the corporate educational arena. Helped by technology and automation, disruptive leaders are challenging the way things are done, the way we think and, in addtion, what we are. After performing a documentation analysis, conclusions are that big problems –as education- need cheap and scaled technology; leadership and organizations must evolve to less human intervention; education and training need a rethought; Eduaction-2-Employment (E2E is key for unemployment; and that new educational structures, delivery methods, pedagogical approaches and advanced Learning Management Systems (LMS are observed proposing huge transformations in the corporate educational arena. This is a qualitative investigation with a not experimental and transversal research design.

  15. Unlimited ion acceleration by radiation pressure.

    Bulanov, S V; Echkina, E Yu; Esirkepov, T Zh; Inovenkov, I N; Kando, M; Pegoraro, F; Korn, G

    2010-04-02

    The energy of ions accelerated by an intense electromagnetic wave in the radiation pressure dominated regime can be greatly enhanced due to a transverse expansion of a thin target. The expansion decreases the number of accelerated ions in the irradiated region resulting in an increase in the ion energy and in the ion longitudinal velocity. In the relativistic limit, the ions become phase locked with respect to the electromagnetic wave resulting in unlimited ion energy gain.

  16. 41 CFR 101-39.106 - Unlimited exemptions.

    2010-07-01

    ...-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.1-Establishment, Modification, and Discontinuance of Interagency Fleet Management Systems § 101-39.106 Unlimited exemptions. Unlimited exemptions from inclusion in the fleet... below. Unlimited exemptions do not preclude agencies from requesting fleet management services, if...

  17. Unlimited productivity: your operation can achieve it

    Bovino, V R

    1986-10-01

    Most mines substantially underestimate their real potential. The market for coal is global and people consider the problems are caused by uncontrolled production of foreign coal, however part of the problem is productivity, that is the ability to produce tons of coal in a cost-effective way, rather than production. Any operation can deliver unlimited productivity by developing the resource within their employees. This paper discusses the areas where the industry has gone wrong, including bureaucracy, blind faith in price rises, wages, adversaries; tradition, narrow job characteristics, conformance over performance for employees, management, money, self-limitations and benefit plans. It also describes three basic ways of improving productivity. These are positive management practices, employee participation and shared rewards.

  18. The Aldine Edition of Aristotle's De Sensu

    Bloch, David Kristian

    2006-01-01

    This small article examines the quality of and the textual foundation for the først printed edition ever of Aristotle's De Sensu et Sensibilibus, that is, Aldus Manutius' (1497).......This small article examines the quality of and the textual foundation for the først printed edition ever of Aristotle's De Sensu et Sensibilibus, that is, Aldus Manutius' (1497)....

  19. 41 CFR 109-39.106 - Unlimited exemptions.

    2010-07-01

    ..., AND MOTOR VEHICLES 39-INTERAGENCY FLEET MANAGEMENT SYSTEMS 39.1-Establishment, Modification, and Discontinuance of Interagency Fleet Management Systems § 109-39.106 Unlimited exemptions. The Director, Office of... determination that an unlimited exemption from inclusion of a motor vehicle in a fleet management system is...

  20. 48 CFR 27.404-1 - Unlimited rights data.

    2010-10-01

    ... data constitute minor modifications to data that are limited rights data or restricted computer... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Unlimited rights data. 27... CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Rights in Data and Copyrights 27.404-1 Unlimited rights...

  1. 41 CFR 109-38.204-1 - Unlimited exemptions.

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Unlimited exemptions... Regulations System (Continued) DEPARTMENT OF ENERGY PROPERTY MANAGEMENT REGULATIONS AVIATION, TRANSPORTATION... § 109-38.204-1 Unlimited exemptions. (a)-(f) [Reserved] (g) The Director, Office of Administrative...

  2. Cyrillic edition "Featron or Historical Shame" of W. Stratemann in the context of development of the book culture and historical books printing in the first quarter of XVIII century: historical, bibliological and culturological analysis

    Sokolov V.

    2014-01-01

    Full Text Available In this article the author offers a historical and bibliological analysis of a Cyrillic edition of the German Protestant Bishop Wilhelm Stratemann work «Featron or Historical Shame» (SPb.: typography of Alexander Nevsky Monastery, 1724 against the background of the Russian book culture, historical thought and book publishing in the first quarter of XVIII century.The research has revealed that the publication of secular books in Russia during this period was under the governmental control and largely depended on the reformation activity of Peter I. We have defined that the main goal of secular publishing was the distribution of enlightenment, science and education ideas. In the article we have revealed the characteristic features of the development of Western European Protestant and Catholic historiography of XVI-XVII centuries. The study of sources and scientific materials allows us to disclose the value of the work of W. Stratemann as the first Russian edition of the world history textbook in the distribution and popularization of historical knowledge, as well as its influence on the Russian historical science formation. We have studied the main historical ideas of W. Stratemann work and G. Buzhinsky foreword, as well as their influence on the development of historical thought in Russia during the studied period. The author attempts to make a bibliological analysis of W. Stratemann publication exemplars which are stored in the holdings of rare books of the largest libraries of Kyiv: the printing features of these printed works, bindings and engravings state, contents of provenances, marginalia etc are characterized.

  3. Deep Random based Key Exchange protocol resisting unlimited MITM

    de Valroger, Thibault

    2018-01-01

    We present a protocol enabling two legitimate partners sharing an initial secret to mutually authenticate and to exchange an encryption session key. The opponent is an active Man In The Middle (MITM) with unlimited computation and storage capacities. The resistance to unlimited MITM is obtained through the combined use of Deep Random secrecy, formerly introduced and proved as unconditionally secure against passive opponent for key exchange, and universal hashing techniques. We prove the resis...

  4. Unlimited - nuclear liabilities in the Federal Republic of Germany

    Arendt, W.

    1986-01-01

    Unlimited nuclear liabilities as in force in the Federal Republic of Germany go beyond the international rules of the Paris liability agreement. The unlimited liability mainly roots in the positive operational experiences and safety balance of the 20 nuclear power plants which meanwhile are in operation in the Federal Republic of Germany. Nuclear liabilities must not be confounded with scepticism as to the utilization of nuclear power. Extraordinary requirements of that kind should rather be reflecting responsibility and clear ideas and notions of the advantages and risks of nuclear energy. (HSCH) [de

  5. Tea and cake [second edition

    Wood, Philippa; MacLellan, Tamar

    2011-01-01

    Tea & Cake is an edited version of the original book produced by Philippa Wood in 2007. The book takes a nostalgic look at childhood memories of ‘baking with mother’ or special tea-time treats. The book combines ink-jet printing with typewritten text and rubber stamps; doilly end-papers and embroidered traycloth covers.

  6. Teacher's Guide to Imagination Unlimited. The MATCH Book Project; Prototype Edition.

    Williams, Susan; Williamson, Sharon

    The idea of this box of multimedia instructional materials is to surround the children with curious and wonderful objects and experiences which will stimulate them to self-expression. The kit provides a set of unusual objects: two movies about a rainshower, one from a weatherman's point of view and one as seen through the eyes of an artist; a set…

  7. COMPARATIVE STUDY: LIMITED LIABILITY COMPANY VERSUS UNLIMITED LIABILITY COMPANY

    Silvia Cristea

    2013-11-01

    Full Text Available Our goal is to differentiate between the legal regime of the limited partnership and that of the unlimited company, by drawing a comparison between civil and special settlement in terms of the following criteria: definition, contributions, capital divisions, the Articles of Association, registration, management control, withdrawal/exclusion of a partner, dissolution/ liquidation. The opinions expressed in the chapter devoted to conclusions are relevant to Romanian and French Law as well.

  8. Packaging Printing Today

    Stanislav Bolanča; Igor Majnarić; Kristijan Golubović

    2015-01-01

    Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. T...

  9. Zero-sum bias: perceived competition despite unlimited resources

    Daniel V Meegan

    2010-11-01

    Full Text Available Zero-sum bias describes intuitively judging a situation to be zero-sum (i.e., resources gained by one party are matched by corresponding losses to another party when it is actually non-zero-sum. The experimental participants were students at a university where students’ grades are determined by how the quality of their work compares to a predetermined standard of quality rather than to the quality of the work produced by other students. This creates a non-zero-sum situation in which high grades are an unlimited resource. In three experiments, participants were shown the grade distribution after a majority of the students in a course had completed an assigned presentation, and asked to predict the grade of the next presenter. When many high grades had already been given, there was a corresponding increase in low grade predictions. This suggests a zero-sum bias, in which people perceive a competition for a limited resource despite unlimited resource availability. Interestingly, when many low grades had already been given, there was not a corresponding increase in high grade predictions. This suggests that a zero-sum heuristic is only applied in response to the allocation of desirable resources. A plausible explanation for the findings is that a zero-sum heuristic evolved as a cognitive adaptation to enable successful intra-group competition for limited resources. Implications for understanding inter-group interaction are also discussed.

  10. Zero-sum bias: perceived competition despite unlimited resources.

    Meegan, Daniel V

    2010-01-01

    Zero-sum bias describes intuitively judging a situation to be zero-sum (i.e., resources gained by one party are matched by corresponding losses to another party) when it is actually non-zero-sum. The experimental participants were students at a university where students' grades are determined by how the quality of their work compares to a predetermined standard of quality rather than to the quality of the work produced by other students. This creates a non-zero-sum situation in which high grades are an unlimited resource. In three experiments, participants were shown the grade distribution after a majority of the students in a course had completed an assigned presentation, and asked to predict the grade of the next presenter. When many high grades had already been given, there was a corresponding increase in low grade predictions. This suggests a zero-sum bias, in which people perceive a competition for a limited resource despite unlimited resource availability. Interestingly, when many low grades had already been given, there was not a corresponding increase in high grade predictions. This suggests that a zero-sum heuristic is only applied in response to the allocation of desirable resources. A plausible explanation for the findings is that a zero-sum heuristic evolved as a cognitive adaptation to enable successful intra-group competition for limited resources. Implications for understanding inter-group interaction are also discussed.

  11. Why do couples discontinue unlimited free IVF treatments?

    Lande, Yechezkel; Seidman, Daniel S; Maman, Ettie; Baum, Micha; Hourvitz, Ariel

    2015-03-01

    Worldwide, IVF is often discontinued before a live birth is achieved due to high costs. Even when partial financial coverage is provided, often medical providers advise treatment discontinuation. In Israel, unlimited IVF is offered free of charge for a couples' first two children. Our objective was to assess the reasons couples discontinue IVF treatments before achieving two children in a completely unlimited cost-free environment. This cohort study included all primary infertile women, reason they ceased treatments. Of the 134 couples included, only 46 ceased IVF treatments without achieving two children, after performing an average of 6.2 IVF cycles to achieve their first birth. The reasons given were: lost hope of success (13), psychological burden (18), divorce (6), medical staff recommendation (5), bureaucratic difficulties (3) and general medical condition (1). The main reasons for "drop out" in our cost-free environment were as follows: psychological burden and lost hope of success. Due to high availability of treatments, medical staff recommendation was a less significant factor in our study.

  12. Unlimited multistability and Boolean logic in microbial signalling

    Kothamachu, Varun B; Feliu, Elisenda; Cardelli, Luca

    2015-01-01

    The ability to map environmental signals onto distinct internal physiological states or programmes is critical for single-celled microbes. A crucial systems dynamics feature underpinning such ability is multistability. While unlimited multistability is known to arise from multi-site phosphorylation...... seen in the signalling networks of eukaryotic cells, a similarly universal mechanism has not been identified in microbial signalling systems. These systems are generally known as two-component systems comprising histidine kinase (HK) receptors and response regulator proteins engaging in phosphotransfer...... further prove that sharing of downstream components allows a system with n multi-domain hybrid HKs to attain 3n steady states. We find that such systems, when sensing distinct signals, can readily implement Boolean logic functions on these signals. Using two experimentally studied examples of two...

  13. Internet printing

    Rahgozar, M. Armon; Hastings, Tom; McCue, Daniel L.

    1997-04-01

    The Internet is rapidly changing the traditional means of creation, distribution and retrieval of information. Today, information publishers leverage the capabilities provided by Internet technologies to rapidly communicate information to a much wider audience in unique customized ways. As a result, the volume of published content has been astronomically increasing. This, in addition to the ease of distribution afforded by the Internet has resulted in more and more documents being printed. This paper introduces several axes along which Internet printing may be examined and addresses some of the technological challenges that lay ahead. Some of these axes include: (1) submission--the use of the Internet protocols for selecting printers and submitting documents for print, (2) administration--the management and monitoring of printing engines and other print resources via Web pages, and (3) formats--printing document formats whose spectrum now includes HTML documents with simple text, layout-enhanced documents with Style Sheets, documents that contain audio, graphics and other active objects as well as the existing desktop and PDL formats. The format axis of the Internet Printing becomes even more exciting when one considers that the Web documents are inherently compound and the traversal into the various pieces may uncover various formats. The paper also examines some imaging specific issues that are paramount to Internet Printing. These include formats and structures for representing raster documents and images, compression, fonts rendering and color spaces.

  14. Printed Electronics

    Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Crain, John M. (Inventor); Aksay, Ilhan A. (Inventor); Lettow, John S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2018-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  15. Digital printing

    Sobotka, Werner K.

    1997-02-01

    Digital printing is described as a tool to replace conventional printing machines completely. Still this goal was not reached until now with any of the digital printing technologies to be described in the paper. Productivity and costs are still the main parameters and are not really solved until now. Quality in digital printing is no problem anymore. Definition of digital printing is to transfer digital datas directly on the paper surface. This step can be carried out directly or with the use of an intermediate image carrier. Keywords in digital printing are: computer- to-press; erasable image carrier; image carrier with memory. Digital printing is also the logical development of the new digital area as it is pointed out in Nicholas Negropotes book 'Being Digital' and also the answer to networking and Internet technologies. Creating images text and color in one country and publishing the datas in another country or continent is the main advantage. Printing on demand another big advantage and last but not least personalization the last big advantage. Costs and being able to coop with this new world of prepress technology is the biggest disadvantage. Therefore the very optimistic growth rates for the next few years are really nonexistent. The development of complete new markets is too slow and the replacing of old markets is too small.

  16. Cluster editing

    Böcker, S.; Baumbach, Jan

    2013-01-01

    . The problem has been the inspiration for numerous algorithms in bioinformatics, aiming at clustering entities such as genes, proteins, phenotypes, or patients. In this paper, we review exact and heuristic methods that have been proposed for the Cluster Editing problem, and also applications......The Cluster Editing problem asks to transform a graph into a disjoint union of cliques using a minimum number of edge modifications. Although the problem has been proven NP-complete several times, it has nevertheless attracted much research both from the theoretical and the applied side...

  17. Planning and Producing Audiovisual Materials. Third Edition.

    Kemp, Jerrold E.

    A revised edition of this handbook provides illustrated, step-by-step explanations of how to plan and produce audiovisual materials. Included are sections on the fundamental skills--photography, graphics and recording sound--followed by individual sections on photographic print series, slide series, filmstrips, tape recordings, overhead…

  18. 75 FR 41762 - Safety Zone; Annual Kennewick, WA, Columbia Unlimited Hydroplane Races, Kennewick, WA

    2010-07-19

    ...-AA00 Safety Zone; Annual Kennewick, WA, Columbia Unlimited Hydroplane Races, Kennewick, WA AGENCY..., Columbia Unlimited Hydroplane Races'' also known as the Tri-City Water Follies Hydroplane Races. The safety... power and responsibilities between the Federal Government and Indian tribes. Energy Effects We have...

  19. Printed photodetectors

    Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

    2015-01-01

    Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems. (paper)

  20. Printed photodetectors

    Pace, Giuseppina; Grimoldi, Andrea; Sampietro, Marco; Natali, Dario; Caironi, Mario

    2015-10-01

    Photodetectors convert light pulses into electrical signals and are fundamental building blocks for any opto-electronic system adopting light as a probe or information carrier. They have widespread technological applications, from telecommunications to sensors in industrial, medical and civil environments. Further opportunities are plastic short-range communications systems, interactive large-area surfaces and light-weight, flexible, digital imagers. These applications would greatly benefit from the cost-effective fabrication processes enabled by printing technology. While organic semiconductors are the most investigated materials for printed photodetectors, and are the main focus of the present review, there are notable examples of other inorganic or hybrid printable semiconductors for opto-electronic systems, such as quantum-dots and nanowires. Here we propose an overview on printed photodetectors, including three-terminal phototransistors. We first give a brief account of the working mechanism of these light sensitive devices, and then we review the recent progress achieved with scalable printing techniques such as screen-printing, inkjet and other non-contact technologies in the development of all-printed or hybrid systems.

  1. Unit: Petroleum, Inspection Pack, National Trial Print.

    Australian Science Education Project, Toorak, Victoria.

    This is a National Trial Print of a unit on petroleum developed for the Australian Science Education Project. The package contains the teacher's edition of the written material and a script for a film entitled "The Extraordinary Experience of Nicholas Nodwell" emphasizing the uses of petroleum and petroleum products in daily life and…

  2. From Sky-Limited to Space-Unlimited

    Editor

    2008-11-01

    Full Text Available Dear friends, A recent email from a friend of mine had a quote "If some one says sky is his limit, I will only feel pity for his poor imagination". This was recollected when we were on a discussion about the physical factors which could be manipulated in several of our chemically synthesized concoctions to yield scaffolds for cell culture. Though the manipulation of physical factors such as elasticity have been proven to have a definite control over the stem cell lineage of differentiation in the in vitro culture conditions, various combinations of such physical factors are yet to be tried which might come over with interesting results. However the entity of gravitational force remain something beyond our control and to be explored in depth. We guess the cell culture and stem cell lineage differentiation could be different especially at different gravities as well as at zero gravity. Enormous coordination has to be done to accomplish such experiments because the transition of cells from earth at 37 Deg celsius into space of no gravity in a very short time, when lifted in a space within the chambers in-built within a satellite, further exposure of them to usual expansion atmosphere sans gravity and then the final return back to earth of the expanded cells will have to be automized. This needs the help of space engineers and electro mechanical automations systems which operate through wireless controls still without in any way jeoparding the cells viability and sterility at any point. Such accomplishment may not be impossible, if have will. Now thinking of the statement quoted in the beginning, its true in a sense that limiting ourselves to an area with gravity has become a real limitation and going out into outer space of different grades of gravity is soon going to become an necessity at least for the stem cell researchers! Let not only the space but also the ideas pour in unlimited to explore what we are yet to!! Yours sincerely,The Editorial

  3. LabVIEW 8 student edition

    Bishop, Robert H

    2007-01-01

    For courses in Measurement and Instrumentation, Electrical Engineering lab, and Physics and Chemistry lab. This revised printing has been updated to include new LabVIEW 8.2 Student Edition. National Instruments' LabVIEW is the defacto industry standard for test, measurement, and automation software solutions. With the Student Edition of LabVIEW, students can design graphical programming solutions to their classroom problems and laboratory experiments with software that delivers the graphical programming capabilites of the LabVIEW professional version. . The Student Edition is also compatible with all National Instruments data acquisition and instrument control hardware. Note: The LabVIEW Student Edition is available to students, faculty, and staff for personal educational use only. It is not intended for research, institutional, or commercial use. For more information about these licensing options, please visit the National Instruments website at (http:www.ni.com/academic/)

  4. Printed Electronics

    Wade, Jessica; Hollis, Joseph Razzell; Wood, Sebastian

    2018-04-01

    The combination of printing technology with manufacturing electronic devices enables a new paradigm of printable electronics, where 'smart' functionality can be readily incorporated into almost any product at low cost. Over recent decades, rapid progress has been made in this field, which is now emerging into the industrial andcommercial realm. However, successful development and commercialisation on a large scale presents some significant technical challenges. For fully-printable electronic systems, all the component parts must be deposited from solutions (inks), requiring the development of new inorganic, organic and hybrid materials.A variety of traditional printing techniques are being explored and adapted forprinting these new materials in ways that result in the best performing electronicdevices. Whilst printed electronics research has initially focused on traditional typesof electronic device such as light-emitting diodes, transistors, and photovoltaics, it is increasingly apparent that a much wider range of applications can be realised. The soft and stretchable nature of printable materials makes them perfect candidates forbioelectronics, resulting in a wealth of research looking at biocompatible printable inks and biosensors. Regardless of application, the properties of printed electronicmaterials depend on the chemical structures, processing conditions, device architecture,and operational conditions, the complex inter-relationships of which aredriving ongoing research. We focus on three particular 'hot topics', where attention is currently focused: novel materials, characterisation techniques, and device stability. With progress advancing very rapidly, printed electronics is expected to grow over the next decade into a key technology with an enormous economic and social impact.

  5. Digital Textile Printing

    Moltchanova, Julia

    2011-01-01

    Rapidly evolving technology of digital printing opens new opportunities on many markets. One of them is the printed fabric market where printing companies as well as clients benefit from new printing methods. This thesis focuses on the digital textile printing technology and its implementation for fabric-on-demand printing service in Finland. The purpose of this project was to study the technology behind digital textile printing, areas of application of this technology, the requirements ...

  6. Packaging Printing Today

    Stanislav Bolanča

    2015-12-01

    Full Text Available Printing packaging covers today about 50% of all the printing products. Among the printing products there are printing on labels, printing on flexible packaging, printing on folding boxes, printing on the boxes of corrugated board, printing on glass packaging, synthetic and metal ones. The mentioned packaging are printed in flexo printing technique, offset printing technique, intaglio halftone process, silk – screen printing, ink ball printing, digital printing and hybrid printing process. The possibilities of particular printing techniques for optimal production of the determined packaging were studied in the paper. The problem was viewed from the technological and economical aspect. The possible printing quality and the time necessary for the printing realization were taken as key parameters. An important segment of the production and the way of life is alocation value and it had also found its place in this paper. The events in the field of packaging printing in the whole world were analyzed. The trends of technique developments and the printing technology for packaging printing in near future were also discussed.

  7. Unlimited energy, restricted carbohydrate diet improves lipid parameters in obese children.

    Dunlap, Brian S; Bailes, James R

    2008-03-01

    Childhood obesity is a leading health concern. We have previously demonstrated the effectiveness of a restricted-carbohydrate, unlimited energy diet for weight reduction in elementary school-aged children. To our knowledge, there are no studies that have looked at the effect of this diet on lipid profiles in elementary school-aged children. Therefore, the objective of this pilot study was to examine the effect of a restricted-carbohydrate, unlimited protein, unlimited energy diet on lipid profiles in obese children 6 to 12 years of age. Overweight children (body mass index >97%) referred to our obesity clinic were treated with a restricted-carbohydrate (unlimited protein, and unlimited energy diet. Weight, height, body mass index, and fasting lipid profiles were obtained at baseline and at 10 weeks on each patient. Twenty-seven patients were enrolled in our study, with a total of 18 patients returning for our 10 week follow-up (67%). The study group included 10 males and 8 females, with an age range of 6 to 12 years. Both total serum cholesterol and triglyceride levels showed a significant reduction; 24.2 (P = 0.018) and 56.9 (P = 0.015) mg/dL, respectively. We have demonstrated a significant decrease in total cholesterol and triglycerides in elementary school-aged children after 10 weeks of a restricted-carbohydrate, unlimited protein, and unlimited energy diet. We suggest that this diet may decrease cardiovascular risk factors in obese children. Long-term studies will be needed to substantiate these data.

  8. Genome editing in pluripotent stem cells: research and therapeutic applications

    Deleidi, Michela, E-mail: michela.deleidi@dzne.de [German Center for Neurodegenerative Diseases (DZNE) Tübingen within the Helmholtz Association, Tübingen (Germany); Hertie Institute for Clinical Brain Research, University of Tübingen (Germany); Yu, Cong [Department of Microbiology and Immunology, School of Medicine and Biomedical Sciences, University at Buffalo, New York (United States)

    2016-05-06

    Recent progress in human pluripotent stem cell (hPSC) and genome editing technologies has opened up new avenues for the investigation of human biology in health and disease as well as the development of therapeutic applications. Gene editing approaches with programmable nucleases have been successfully established in hPSCs and applied to study gene function, develop novel animal models and perform genetic and chemical screens. Several studies now show the successful editing of disease-linked alleles in somatic and patient-derived induced pluripotent stem cells (iPSCs) as well as in animal models. Importantly, initial clinical trials have shown the safety of programmable nucleases for ex vivo somatic gene therapy. In this context, the unlimited proliferation potential and the pluripotent properties of iPSCs may offer advantages for gene targeting approaches. However, many technical and safety issues still need to be addressed before genome-edited iPSCs are translated into the clinical setting. Here, we provide an overview of the available genome editing systems and discuss opportunities and perspectives for their application in basic research and clinical practice, with a particular focus on hPSC based research and gene therapy approaches. Finally, we discuss recent research on human germline genome editing and its social and ethical implications. - Highlights: • Programmable nucleases have proven efficient and specific for genome editing in human pluripotent stem cells (hPSCs). • Genome edited hPSCs can be employed to study gene function in health and disease as well as drug and chemical screens. • Genome edited hPSCs hold great promise for ex vivo gene therapy approaches. • Technical and safety issues should be first addressed to advance the clinical use of gene-edited hPSCs.

  9. Genome editing in pluripotent stem cells: research and therapeutic applications

    Deleidi, Michela; Yu, Cong

    2016-01-01

    Recent progress in human pluripotent stem cell (hPSC) and genome editing technologies has opened up new avenues for the investigation of human biology in health and disease as well as the development of therapeutic applications. Gene editing approaches with programmable nucleases have been successfully established in hPSCs and applied to study gene function, develop novel animal models and perform genetic and chemical screens. Several studies now show the successful editing of disease-linked alleles in somatic and patient-derived induced pluripotent stem cells (iPSCs) as well as in animal models. Importantly, initial clinical trials have shown the safety of programmable nucleases for ex vivo somatic gene therapy. In this context, the unlimited proliferation potential and the pluripotent properties of iPSCs may offer advantages for gene targeting approaches. However, many technical and safety issues still need to be addressed before genome-edited iPSCs are translated into the clinical setting. Here, we provide an overview of the available genome editing systems and discuss opportunities and perspectives for their application in basic research and clinical practice, with a particular focus on hPSC based research and gene therapy approaches. Finally, we discuss recent research on human germline genome editing and its social and ethical implications. - Highlights: • Programmable nucleases have proven efficient and specific for genome editing in human pluripotent stem cells (hPSCs). • Genome edited hPSCs can be employed to study gene function in health and disease as well as drug and chemical screens. • Genome edited hPSCs hold great promise for ex vivo gene therapy approaches. • Technical and safety issues should be first addressed to advance the clinical use of gene-edited hPSCs.

  10. The Really Useful Book of Learning & Earning for Young Adult Carers. Third Edition

    Learning and Work Institute, 2016

    2016-01-01

    "The Really Useful Book of Learning and Earning for Young Adult Carers" is aimed at young adults (aged 16-25) in England who are looking after somebody else. The first edition of the book was printed in 2011. This third edition is full of new and up-to-date useful information about looking after your health and wellbeing, job hunting,…

  11. Optical fabrication of lightweighted 3D printed mirrors

    Herzog, Harrison; Segal, Jacob; Smith, Jeremy; Bates, Richard; Calis, Jacob; De La Torre, Alyssa; Kim, Dae Wook; Mici, Joni; Mireles, Jorge; Stubbs, David M.; Wicker, Ryan

    2015-09-01

    Direct Metal Laser Sintering (DMLS) and Electron Beam Melting (EBM) 3D printing technologies were utilized to create lightweight, optical grade mirrors out of AlSi10Mg aluminum and Ti6Al4V titanium alloys at the University of Arizona in Tucson. The mirror prototypes were polished to meet the λ/20 RMS and λ/4 P-V surface figure requirements. The intent of this project was to design topologically optimized mirrors that had a high specific stiffness and low surface displacement. Two models were designed using Altair Inspire software, and the mirrors had to endure the polishing process with the necessary stiffness to eliminate print-through. Mitigating porosity of the 3D printed mirror blanks was a challenge in the face of reconciling new printing technologies with traditional optical polishing methods. The prototypes underwent Hot Isostatic Press (HIP) and heat treatment to improve density, eliminate porosity, and relieve internal stresses. Metal 3D printing allows for nearly unlimited topological constraints on design and virtually eliminates the need for a machine shop when creating an optical quality mirror. This research can lead to an increase in mirror mounting support complexity in the manufacturing of lightweight mirrors and improve overall process efficiency. The project aspired to have many future applications of light weighted 3D printed mirrors, such as spaceflight. This paper covers the design/fab/polish/test of 3D printed mirrors, thermal/structural finite element analysis, and results.

  12. System description: Isabelle/jEdit in 2014

    Makarius Wenzel

    2014-10-01

    Full Text Available This is an updated system description for Isabelle/jEdit, according to the official release Isabelle2014 (August 2014. The following new PIDE concepts are explained: asynchronous print functions and document overlays, syntactic and semantic completion, editor navigation, management of auxiliary files within the document-model.

  13. 75 FR 69577 - Deposit Insurance Regulations; Unlimited Coverage for Noninterest-Bearing Transaction Accounts

    2010-11-15

    ..., contending that providing such coverage for these accounts promotes moral hazard. Four commenters suggested... withdrawals at any time, whether held by a business, an individual or other type of depositor. Unlike the... for unlimited separate coverage as a noninterest-bearing transaction account. One issue raised during...

  14. Protective effect of inhaled budesonide against unlimited airway narrowing to methacholine in atopic patients with asthma

    Booms, P.; Cheung, D.; Timmers, M. C.; Zwinderman, A. H.; Sterk, P. J.

    1997-01-01

    Patients with asthma who have moderate to severe airway hyperresponsiveness often demonstrate progressive, unlimited airway narrowing in response to inhaled bronchoconstrictor stimuli, which is likely to be due to inflammatory changes within the airway wall. It is unknown whether regular therapy

  15. 29 CFR 1625.11 - Exemption for employees serving under a contract of unlimited tenure.

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Exemption for employees serving under a contract of unlimited tenure. 1625.11 Section 1625.11 Labor Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT... within the exemption can lawfully be forced to retire on account of age at age 70 (see paragraph (a)(1...

  16. 26 CFR 1.642(c)-1 - Unlimited deduction for amounts paid for a charitable purpose.

    2010-04-01

    ... the election was made, (iii) The office of the district director, or the service center, where the....642(c)-1 Unlimited deduction for amounts paid for a charitable purpose. (a) In general. (1) Any part... election, to a related estate, as defined under § 1.645-1(b), for the amount so paid. (2) In determining...

  17. Multiplex editing system

    2015-01-01

    The present invention relates to a multiplex editing system. The system allows multiple editing of nucleic acid sequences such as genomic sequences, such as knockins of genes of interest in a genome, knockouts of genomic sequences and/or allele replacement. Also provided herein are a method...... for editing nucleic acids and a cell comprising a stably integrated endonuclease....

  18. Single-edition quadrangle maps

    ,

    1998-01-01

    In August 1993, the U.S. Geological Survey's (USGS) National Mapping Division and the U.S. Department of Agriculture's Forest Service signed an Interagency Agreement to begin a single-edition joint mapping program. This agreement established the coordination for producing and maintaining single-edition primary series topographic maps for quadrangles containing National Forest System lands. The joint mapping program saves money by eliminating duplication of effort by the agencies and results in a more frequent revision cycle for quadrangles containing national forests. Maps are revised on the basis of jointly developed standards and contain normal features mapped by the USGS, as well as additional features required for efficient management of National Forest System lands. Single-edition maps look slightly different but meet the content, accuracy, and quality criteria of other USGS products. The Forest Service is responsible for the land management of more than 191 million acres of land throughout the continental United States, Alaska, and Puerto Rico, including 155 national forests and 20 national grasslands. These areas make up the National Forest System lands and comprise more than 10,600 of the 56,000 primary series 7.5-minute quadrangle maps (15-minute in Alaska) covering the United States. The Forest Service has assumed responsibility for maintaining these maps, and the USGS remains responsible for printing and distributing them. Before the agreement, both agencies published similar maps of the same areas. The maps were used for different purposes, but had comparable types of features that were revised at different times. Now, the two products have been combined into one so that the revision cycle is stabilized and only one agency revises the maps, thus increasing the number of current maps available for National Forest System lands. This agreement has improved service to the public by requiring that the agencies share the same maps and that the maps meet a

  19. Critical properties of unlimited gliding: Unexpected flocking behavior driven by the exchange of information

    Bigus-Kwiatkowska, Marta; Fronczak, Agata; Fronczak, Piotr

    2018-03-01

    Inspired by albatrosses that use thermal lifts to fly across oceans we develop a simple model of gliders that serves us to study theoretical limitations of unlimited exploration of the Earth. Our studies, grounded in physical theory of continuous percolation and biased random walks, allow us to identify a variety of percolation transitions, which are understood as providing potentially unlimited movement through a space in a specified direction. We discover an unexpected phenomenon of self-organization of gliders in clusters, which resembles the flock organization of birds. This self-organization is intriguing, as it occurs thanks to exchange of information only and without any particular rules that could favor the clustering of the gliders (in contrast to the causes well known in literature, like, for example, attractive forces used in the Vicsek-type models or fitness functions used in evolutionary computation).

  20. [A factor analysis method for contingency table data with unlimited multiple choice questions].

    Toyoda, Hideki; Haiden, Reina; Kubo, Saori; Ikehara, Kazuya; Isobe, Yurie

    2016-02-01

    The purpose of this study is to propose a method of factor analysis for analyzing contingency tables developed from the data of unlimited multiple-choice questions. This method assumes that the element of each cell of the contingency table has a binominal distribution and a factor analysis model is applied to the logit of the selection probability. Scree plot and WAIC are used to decide the number of factors, and the standardized residual, the standardized difference between the sample, and the proportion ratio, is used to select items. The proposed method was applied to real product impression research data on advertised chips and energy drinks. Since the results of the analysis showed that this method could be used in conjunction with conventional factor analysis model, and extracted factors were fully interpretable, and suggests the usefulness of the proposed method in the study of psychology using unlimited multiple-choice questions.

  1. Three-dimensional orientation-unlimited polarization encryption by a single optically configured vectorial beam.

    Li, Xiangping; Lan, Tzu-Hsiang; Tien, Chung-Hao; Gu, Min

    2012-01-01

    The interplay between light polarization and matter is the basis of many fundamental physical processes and applications. However, the electromagnetic wave nature of light in free space sets a fundamental limit on the three-dimensional polarization orientation of a light beam. Although a high numerical aperture objective can be used to bend the wavefront of a radially polarized beam to generate the longitudinal polarization state in the focal volume, the arbitrary three-dimensional polarization orientation of a beam has not been achieved yet. Here we present a novel technique for generating arbitrary three-dimensional polarization orientation by a single optically configured vectorial beam. As a consequence, by applying this technique to gold nanorods, orientation-unlimited polarization encryption with ultra-security is demonstrated. These results represent a new landmark of the orientation-unlimited three-dimensional polarization control of the light-matter interaction.

  2. Unlimited Energy Gain in the Laser-Driven Radiation Pressure Dominant Acceleration of Ions

    Bulanov, S. V.; Echkina, E. Yu.; Esirkepov, T. Zh.; Inovenkov, I. N.; Kando, M.; Pegoraro, F.; Korn, G.

    2009-01-01

    The energy of the ions accelerated by an intense electromagnetic wave in the radiation pressure dominated regime can be greatly enhanced due to a transverse expansion of a thin target. The expansion decreases the number of accelerated ions in the irradiated region increasing the energy and the longitudinal velocity of remaining ions. In the relativistic limit, the ions become phase-locked with respect to the electromagnetic wave resulting in the unlimited ion energy gain. This effect and the ...

  3. Sociopathic Knowledge Bases: Correct Knowledge Can Be Harmful Even Given Unlimited Computation

    1989-08-01

    1757 I Sociopathic Knowledge Bases: Correct Knowledge Can Be Harmful Even Given Unlimited Computation DTIC5 by flELECTE 5David C. Wilkins and Yong...NUMBERSWOKNI PROGRAM RAT TSWOKUI 61153N RR04206 OC 443g-008 11 TITLE (Include Security Classification) Sociopathic Knowledge Bases: Correct Knowledge Can be...probabilistic rules are shown to be sociopathic and so this problem is very widespread. Sociopathicity has important consequences for rule induction

  4. General edition program

    Vaturi, Sylvain

    1969-01-01

    Computerized edition is essential for data processing exploitation. When a more or less complex edition program is required for each task, then the need for a general edition program become obvious. The aim of this study is to create a general edition program. Universal programs are capable to execute numerous and varied tasks. For a more precise processing, the execution of which is frequently required, the use of a specialized program is preferable because, contradictory to the universal program, it goes straight to the point [fr

  5. Checking a printed board

    1977-01-01

    An 'Interactive Printed Circuit Board Design System' has been developed by a company in a Member-State. Printed circuits are now produced at the SB's surface treatment workshop using a digitized photo-plotter.

  6. Explanatory Supplement to the Astronomical Almanac, Third Edition

    Seidelmann, P. Kenneth; Urban, S. E.

    2010-01-01

    "The Explanatory Supplement to the Astronomical Almanac" (hereafter "The Explanatory Supplement") is a comprehensive reference book on the topic of positional astronomy, covering the theories and algorithms used to produce "The Astronomical Almanac" (AsA), an annual publication produced jointly by the Nautical Almanac Office of the US Naval Observatory (USNO) and Her Majesty's Nautical Almanac Office (HMNAO) of the UK Hydrographic Office. The first edition of The Explanatory Supplement appeared in 1961 and was reprinted with amendments during the 1970s. The second edition was printed in 1992 and reprinted until 2006. Since the second edition, several changes have taken place in positional astronomy regarding reference systems and internationally accepted models, data sets, and computational methods; these have been incorporated into the AsA. Additionally, the data presented in the AsA have been modified over the years, with new tables being added and some being discontinued. Given these changes, a new edition of The Explanatory Supplement is appropriate. The third edition has been in development for the last few years and will be available in 2010. The book is organized similarly to the second (1991) edition, with each chapter written by subject matter experts. Authors from USNO and HMNAO contributed to the majority of the book, but there are authors from Jet Propulsion Laboratory, Technical University of Dresden, National Geospatial-Intelligence Agency, University of Texas Austin, and University of Virginia. This paper will discuss this latest edition of the Explanatory Supplement.

  7. Enhancing creativity for individuals, groups and organizations: Creativity as the Unlimited Application of Knowledge

    Byrge, Christian; Hansen, Søren

    How do we become creative individuals, by ourselves and with others? How do we increase innovation in our work or study environments? How do we learn to think in unlimited ways? The answers to these questions can be found in this book, which presents new methods for enhancing our own and others......, cultural or professional backgrounds. Using a newly developed scientific theory combined with three practical and thoroughly tested methods, scholars Christian Byrge and Søren Hansen demonstrate how to increase our possibilities for creative thinking in both our academic, professional and private lives...

  8. EARLY ENGLISH PRINTING AND THE HANDS OF COMPOSITORS

    Satoko Tokunaga

    2005-12-01

    Full Text Available This paper examines soine distinctive uses of typefaces by Caxton's compositors in his early products at Westminster and illustrates how useful such examples are in revealing the chronology of actual book production, as well as in identifying the compositors at work on individual volumes. An exhaustive analysis of early printed books can provide us with information about compositors at work in England's earliest printing house. This paper therefore argues that it is inost definitely worth considering such 'inechaiiical' aspects of book design as typography when editing any printed text, and introduces most recent research results contributed by a project at Keio University, which airns to establish a semiautomatic system that can transcribe every feature of the printed text including even minute differences in types.

  9. Advances in 3D printing & additive manufacturing technologies

    Pandey, Pulak; Kumar, L

    2017-01-01

    This edited volume comprises select chapters on advanced technologies for 3D printing and additive manufacturing and how these technologies have changed the face of direct, digital technologies for rapid production of models, prototypes and patterns. Because of its wide applications, 3D printing and additive manufacturing technology has become a powerful new industrial revolution in the field of manufacturing. The evolution of 3D printing and additive manufacturing technologies has changed design, engineering and manufacturing processes across industries such as consumer products, aerospace, medical devices and automotives. The objective of this book is to help designers, R&D personnel, and practicing engineers understand the state-of-the-art developments in the field of 3D Printing and Additive Manufacturing. .

  10. Print mass media: territory of survival

    Evgeny V. Akhmadulin

    2016-09-01

    Full Text Available The article is devoted to the problem of the survival of the print media in the information market in the conditions of intense competition with online journalism and the whole information flow on the Internet. Despite the predictions of the impending death of print periodicals, more than half of the world adult population read a daily newspaper. At the same time, the trends taking place in the media market, confirm the reduction of print media segment in favor of the Internet. According to TNS-Russia data, only in 2013 the Internet audience has grown by 6 %. At the same time the circulation of print media in the US fell by 15 % in 2008- 2014, in Western Europe – by a quarter. In Russia, subscription circulation periodicals in the second half of 2014 fell by 20.2 %, and on the basis of subscription for the first half of 2015, the national average – 22 % (data of Federal State Unitary Enterprise “Russian Post”. Finding ways to stabilize the fall of the print media, many US publishing houses see the transition from advertcentric business model to consumcentric model. It is necessary to use the specifics and advantages of newspapers and magazines (comfort, media planning logic, analytic, continuity and consistency of the content of individual and hypertext editions, and others to maintain the intellectual elite. Print media targeting to an elite audience (willing to pay for exclusiveness allows publishers to offset the rising cost of issuing paperbased, and consumers (subscribers will give a sense of communion to a certain social community, receiving verified and thorough information. In this case, the subscription to a newspaper or magazine (no retail outlet and online will be fashionable factor of association of elite communities and acquire new qualitative features in the development of civil society.

  11. Technobabble: Photoshop 6 Converges Web, Print Photograph-Editing Capabilities.

    Communication: Journalism Education Today, 2001

    2001-01-01

    Discusses the newly-released Adobe Photoshop 6, and its use in student publications. Notes its refined text-handling capabilities, a more user-friendly interface, integrated vector functions, easier preparation of Web images, and new and more powerful layer functions. (SR)

  12. Printing quality control automation

    Trapeznikova, O. V.

    2018-04-01

    One of the most important problems in the concept of standardizing the process of offset printing is the control the quality rating of printing and its automation. To solve the problem, a software has been developed taking into account the specifics of printing system components and the behavior in printing process. In order to characterize the distribution of ink layer on the printed substrate the so-called deviation of the ink layer thickness on the sheet from nominal surface is suggested. The geometric data construction the surface projections of the color gamut bodies allows to visualize the color reproduction gamut of printing systems in brightness ranges and specific color sectors, that provides a qualitative comparison of the system by the reproduction of individual colors in a varying ranges of brightness.

  13. CRISPR Genome Editing

    A research article about a technique for gene editing known as CRISPR-Cas9. The technique has made it much easier and faster for cancer researchers to study mutations and test new therapeutic targets.

  14. The genome editing revolution

    Stella, Stefano; Montoya, Guillermo

    2016-01-01

    -Cas system has become the main tool for genome editing in many laboratories. Currently the targeted genome editing technology has been used in many fields and may be a possible approach for human gene therapy. Furthermore, it can also be used to modifying the genomes of model organisms for studying human......In the last 10 years, we have witnessed a blooming of targeted genome editing systems and applications. The area was revolutionized by the discovery and characterization of the transcription activator-like effector proteins, which are easier to engineer to target new DNA sequences than...... sequence). This ribonucleoprotein complex protects bacteria from invading DNAs, and it was adapted to be used in genome editing. The CRISPR ribonucleic acid (RNA) molecule guides to the specific DNA site the Cas9 nuclease to cleave the DNA target. Two years and more than 1000 publications later, the CRISPR...

  15. Introduction to printed electronics

    Suganuma, Katsuaki

    2014-01-01

    This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large, and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.

  16. Making PMT halftone prints

    Corey, J.D.

    1977-05-01

    In the printing process for technical reports presently used at Bendix Kansas City Division, photographs are reproduced by pasting up PMT halftone prints on the artwork originals. These originals are used to make positive-working plastic plates for offset lithography. Instructions for making good-quality halftone prints using Eastman Kodak's PMT materials and processes are given in this report. 14 figures.

  17. Print and Manuscript

    Erne, Lukas Christian

    2007-01-01

    Positioning Shakespeare at the "crossroads of manuscript and print" and exploring what the choice of print or manuscript reveals about the poet's intended audience and the social persona the poet wanted to assume and fashion, argues that "Shakespeare's authorial self-presentation begins as a poet and, more specifically, as a print-published poet" with the publication of Venus and Adonis in 1593 and the allusion to the publication of Rape of Lucrece in the next year. Yet also considers the imp...

  18. Neurosurgery. Fourth edition

    Simon, L.; Thomas, D.G.T.; Clark, W.K.

    1987-01-01

    The Fourth Edition of this volume in the Operative Surgery Series has been considerably revised to accommodate the many changes which have changed the practice of neurosurgery in the past eight years. There have been advances in technology, such as the wider application of CT scanning, in surgical technique, and in the design of new implantable materials. All these developments have substantially affected both the practice of neurosurgery and the prognosis for the patient and are fully reflected in the new edition

  19. Human Germline Genome Editing

    Ormond, Kelly E.; Mortlock, Douglas P.; Scholes, Derek T.; Bombard, Yvonne; Brody, Lawrence C.; Faucett, W. Andrew; Garrison, Nanibaa’ A.; Hercher, Laura; Isasi, Rosario; Middleton, Anna; Musunuru, Kiran; Shriner, Daniel; Virani, Alice; Young, Caroline E.

    2017-01-01

    With CRISPR/Cas9 and other genome-editing technologies, successful somatic and germline genome editing are becoming feasible. To respond, an American Society of Human Genetics (ASHG) workgroup developed this position statement, which was approved by the ASHG Board in March 2017. The workgroup included representatives from the UK Association of Genetic Nurses and Counsellors, Canadian Association of Genetic Counsellors, International Genetic Epidemiology Society, and US National Society of Gen...

  20. Decimal Classification Editions

    Zenovia Niculescu

    2009-01-01

    Full Text Available The study approaches the evolution of Dewey Decimal Classification editions from the perspective of updating the terminology, reallocating and expanding the main and auxilary structure of Dewey indexing language. The comparative analysis of DDC editions emphasizes the efficiency of Dewey scheme from the point of view of improving the informational offer, through basic index terms, revised and developed, as well as valuing the auxilary notations.

  1. Decimal Classification Editions

    Zenovia Niculescu

    2009-01-01

    The study approaches the evolution of Dewey Decimal Classification editions from the perspective of updating the terminology, reallocating and expanding the main and auxilary structure of Dewey indexing language. The comparative analysis of DDC editions emphasizes the efficiency of Dewey scheme from the point of view of improving the informational offer, through basic index terms, revised and developed, as well as valuing the auxilary notations.

  2. Engraving Print Classification

    Hoelck, Daniel; Barbe, Joaquim

    2008-01-01

    A print is a mark, or drawing, made in or upon a plate, stone, woodblock or other material which is cover with ink and then is press usually into a paper reproducing the image on the paper. Engraving prints usually are image composed of a group of binary lines, specially those are made with relief and intaglio techniques. Varying the number and the orientation of lines, the drawing of the engraving print is conformed. For this reason we propose an application based on image processing methods to classify engraving prints

  3. Yalews edited article

    Toefl

    understandable printed information may increase its influence on purchase decision. ... Consumer decision identifies at least two types of decision making ... an early stage of development and currently accounts for about 7 per cent of the GDP ...

  4. Printing Has a Future

    Hans Georg Wenke

    2004-12-01

    Full Text Available Printing will also be done in the future. Printed items meet basic needs and are deeply anchored in people’s habits. Being able to handle and collect printed matter is highly attractive. And paper is now more alive than ever. It is therefore too shortsighted to disclaim the importance of one of the still large economic sectors just because of a few looming-recession instigated market shifts.The exciting aspect of drupa 2004 is: printing will be reinvented, so to speak. Much more printing will be done in the future than at present. On the one hand, people are concentrating on process optimization and automation to ensure this. Measuring and testing, process control and optimization, and linking up "office software" with printing technology will be very central topics at drupa 2004. Electronics and print are not rivals; a symbiosis exists. And printing is high-tech: hardly any other multifaceted sector which has been so successful for centuries is as computerized as the printing industry.A series of "new chapters" in the variety of printing possibilities will be opened at drupa. Talk will be generated by further technical developments, often the connection between paper/cardboard and electronics, the link between the office world and graphics industry, text databases and their link-up to graphic page production tools, and "on the fly" dynamic printing over networks.All of this and more belongs to future potentialities, which are so substantial overall, the outlook is by no means black for the "black art". Like its predecessors, drupa 2004 is also a product trade fair. However, more than ever before in its history, it is also an "information village". The exhibits are useful, because they occasionally make what this means visible.

  5. Novel birefringence interrogation for Sagnac loop interferometer sensor with unlimited linear measurement range.

    He, Haijun; Shao, Liyang; Qian, Heng; Zhang, Xinpu; Liang, Jiawei; Luo, Bin; Pan, Wei; Yan, Lianshan

    2017-03-20

    A novel demodulation method for Sagnac loop interferometer based sensor has been proposed and demonstrated, by unwrapping the phase changes with birefringence interrogation. A temperature sensor based on Sagnac loop interferometer has been used to verify the feasibility of the proposed method. Several tests with 40 °C temperature range have been accomplished with a great linearity of 0.9996 in full range. The proposed scheme is universal for all Sagnac loop interferometer based sensors and it has unlimited linear measurable range which overwhelming the conventional demodulation method with peak/dip tracing. Furthermore, the influence of the wavelength sampling interval and wavelength span on the demodulation error has been discussed in this work. The proposed interrogation method has a great significance for Sagnac loop interferometer sensor and it might greatly enhance the availability of this type of sensors in practical application.

  6. Performance of artificially defected LWR fuel rods in an unlimited air dry storage atmosphere

    Einziger, R.E.; Knecht, R.L.; Cantley, D.A.; Cook, J.A.

    1983-09-01

    Thus far the tests are inconclusive as to whether breached LWR fuel can be stored at 230 0 C for long periods of time in air without fuel oxidation and dispersion. There is every indication, as expected, that there is no oxidation problem in an inert atmosphere. Only one of four defects exposed to unlimited air gave any indication of fuel oxidation. It has been suggested that this might be an incubation effect and continued operation would result in oxidation occurring at all four defects. As yet the destructive examination of the BWR rod has not been completed, so it is not possible to determine if cladding splitting was due to an anomoly in this test rod or something that can be expected in LWR rods in general. Thus far there is no indication of respirable particle dispersal even if fuel oxidation does occur

  7. A Novel Variable Stiffness Mechanism Capable of an Infinite Stiffness Range and Unlimited Decoupled Output Motion

    Stefan Groothuis

    2014-06-01

    Full Text Available In this paper, a novel variable stiffness mechanism is presented, which is capable of achieving an output stiffness with infinite range and an unlimited output motion, i.e., the mechanism output is completely decoupled from the rotor motion, in the zero stiffness configuration. The mechanism makes use of leaf springs, which are engaged at different positions by means of two movable supports, to realize the variable output stiffness. The Euler–Bernoulli leaf spring model is derived and validated through experimental data. By shaping the leaf springs, it is shown that the stiffness characteristic of the mechanism can be changed to fulfill different application requirements. Alternative designs can achieve the same behavior with only one leaf spring and one movable support pin.

  8. Printing Ancient Terracotta Warriors

    Gadecki, Victoria L.

    2010-01-01

    Standing in awe in Xian, China, at the Terra Cotta warrior archaeological site, the author thought of sharing this experience and excitement with her sixth-grade students. She decided to let her students carve patterns of the ancient soldiers to understand their place in Chinese history. They would make block prints and print multiple soldiers on…

  9. Print like an Egyptian.

    Weisensee, Marilyn

    1990-01-01

    Describes a relief printmaking unit for sixth graders with the objective of decorating the inside of a pyramid. Ancient Egyptian imagery was used to help students become familiar with the style. Students designed and printed linoleum prints in different colors. They then critiqued their work and made their selection for the pyramid. (KM)

  10. Editing Audio with Audacity

    Brandon Walsh

    2016-08-01

    Full Text Available For those interested in audio, basic sound editing skills go a long way. Being able to handle and manipulate the materials can help you take control of your object of study: you can zoom in and extract particular moments to analyze, process the audio, and upload the materials to a server to compliment a blog post on the topic. On a more practical level, these skills could also allow you to record and package recordings of yourself or others for distribution. That guest lecture taking place in your department? Record it and edit it yourself! Doing so is a lightweight way to distribute resources among various institutions, and it also helps make the materials more accessible for readers and listeners with a wide variety of learning needs. In this lesson you will learn how to use Audacity to load, record, edit, mix, and export audio files. Sound editing platforms are often expensive and offer extensive capabilities that can be overwhelming to the first-time user, but Audacity is a free and open source alternative that offers powerful capabilities for sound editing with a low barrier for entry. For this lesson we will work with two audio files: a recording of Bach’s Goldberg Variations available from MusOpen and another recording of your own voice that will be made in the course of the lesson. This tutorial uses Audacity 2.1.2, released January 2016.

  11. Introduction of unlimited liability into the atomic law with special regard to the international nuclear liability conventions

    Hohlefelder, W.

    1984-01-01

    The paper was read at the international symposium on nuclear liability held in Munich in September 1984 by OECD/NEA and IAEA. It outlines the basic principles of the Paris liability convention and the international development. The author pleads in favour of unlimited liability for hazards on grounds of history, legal policy, legal dogmatics and practice. Moreover he thinks it useful and appropriate because it also improves the protection of the citizens. The same as the federal government the author holds that unlimited liability for hazards is compatible with the maximum damages and the congruity regulations of the Paris and Brussels liability convention. An amendment to the liability convention, though not necessary, would be desirable to make clear that both options - limited and unlimited liability - are open. (HSCH) [de

  12. Precision genome editing

    Steentoft, Catharina; Bennett, Eric P; Schjoldager, Katrine Ter-Borch Gram

    2014-01-01

    Precise and stable gene editing in mammalian cell lines has until recently been hampered by the lack of efficient targeting methods. While different gene silencing strategies have had tremendous impact on many biological fields, they have generally not been applied with wide success in the field...... of glycobiology, primarily due to their low efficiencies, with resultant failure to impose substantial phenotypic consequences upon the final glycosylation products. Here, we review novel nuclease-based precision genome editing techniques enabling efficient and stable gene editing, including gene disruption...... by introducing single or double-stranded breaks at a defined genomic sequence. We here compare and contrast the different techniques and summarize their current applications, highlighting cases from the field of glycobiology as well as pointing to future opportunities. The emerging potential of precision gene...

  13. Human Germline Genome Editing.

    Ormond, Kelly E; Mortlock, Douglas P; Scholes, Derek T; Bombard, Yvonne; Brody, Lawrence C; Faucett, W Andrew; Garrison, Nanibaa' A; Hercher, Laura; Isasi, Rosario; Middleton, Anna; Musunuru, Kiran; Shriner, Daniel; Virani, Alice; Young, Caroline E

    2017-08-03

    With CRISPR/Cas9 and other genome-editing technologies, successful somatic and germline genome editing are becoming feasible. To respond, an American Society of Human Genetics (ASHG) workgroup developed this position statement, which was approved by the ASHG Board in March 2017. The workgroup included representatives from the UK Association of Genetic Nurses and Counsellors, Canadian Association of Genetic Counsellors, International Genetic Epidemiology Society, and US National Society of Genetic Counselors. These groups, as well as the American Society for Reproductive Medicine, Asia Pacific Society of Human Genetics, British Society for Genetic Medicine, Human Genetics Society of Australasia, Professional Society of Genetic Counselors in Asia, and Southern African Society for Human Genetics, endorsed the final statement. The statement includes the following positions. (1) At this time, given the nature and number of unanswered scientific, ethical, and policy questions, it is inappropriate to perform germline gene editing that culminates in human pregnancy. (2) Currently, there is no reason to prohibit in vitro germline genome editing on human embryos and gametes, with appropriate oversight and consent from donors, to facilitate research on the possible future clinical applications of gene editing. There should be no prohibition on making public funds available to support this research. (3) Future clinical application of human germline genome editing should not proceed unless, at a minimum, there is (a) a compelling medical rationale, (b) an evidence base that supports its clinical use, (c) an ethical justification, and (d) a transparent public process to solicit and incorporate stakeholder input. Copyright © 2017 American Society of Human Genetics. All rights reserved.

  14. Editing faces in videos

    Amberg, Brian

    2011-01-01

    Editing faces in movies is of interest in the special effects industry. We aim at producing effects such as the addition of accessories interacting correctly with the face or replacing the face of a stuntman with the face of the main actor. The system introduced in this thesis is based on a 3D generative face model. Using a 3D model makes it possible to edit the face in the semantic space of pose, expression, and identity instead of pixel space, and due to its 3D nature allows...

  15. Goethe in the Hall and His Journeys in Printed Rome

    Victor Plahte Tschudi

    2015-12-01

    Full Text Available The article focuses on graphic reproductions in Johann Wolfgang von Goethe’s 'Italian Journey'. This travel account gives a clear sense of how important prints were as part of Goethe’s education and preparation for the encounter with classical Roman monuments. As the text itself was edited and rewritten thirty to forty years after the journey itself, however, prints also became crucial in the attempt to remember that journey. In other words, the author of the 'Journey', in contrast to the youthful traveler, no longer sees engravings of Rome, but Rome through engravings. The discussion takes as a point of departure Goethe’s vast collection of prints, still kept in Weimar. Measured up against the references in the travel journal, prints not only reflected his impression of monuments, but also structured those impressions, as the elderly man looks back and reassembles his memories to make an official account of his life. However, it is too easy to ascribe this reliance on prints to a fading memory — on the contrary. As he grows into old age, Goethe’s idea of graphic reproduction evolves in parallel with his increasingly refined theories of nature. His growing preference for prints depicted as ruins reflects the aging author’s own sense of change and transformation.

  16. Colour printing techniques

    Parraman, C.

    2017-01-01

    Invited chapter in the book Colour Design: Theories and Applications. In PART 3 COLOUR, DESIGN AND COLORATION this chapter covers:\\ud - Hardcopy colour: analogue versus digital\\ud - Colour theory in relation to printing\\ud - Overview of halftoning and digital print technologies\\ud - Overview and development of inks\\ud - Inkjet papers and inks\\ud - Recent and future trends in colour, printing inks and hardware.\\ud \\ud This book differs from other existing books in the field, with the aim of an...

  17. Subsystem for processing, storage and editing of the results of the chamber film scanning

    Balgansurehn, Ya.; Dirner, A.; Ivanov, V.G.

    1987-01-01

    A subsystem which is an element of the high-automated system for film data processing and intended for run with the scanning information is described. The subsystem consists of routines which allow to create, to edit and to print the file of scanning results both in batch and interactive mode on the CDC-6500 computer

  18. Nathaniel Merriman's Lecture: “On the Study of Shakspeare” (Edited ...

    Nathaniel Merriman's Lecture: “On the Study of Shakspeare” (Edited by L. Wright. ... The Anglo-African newspaper was started by C.T. Campbell in 1853, and his press undertook jobbing printing as a side-line. A general background to the lectures in the context of nineteenth century Grahamstown is provided in the ...

  19. Ultraviolet and electron-beam curing of printing inks. January 1980-August 1987 (Citations from World Surface Coatings Abstracts). Report for January 1980-August 1987

    1989-08-01

    This bibliography contains citations concerning methods, techniques, and applications for the ultraviolet and electron-beam curing of printing inks. Topics include ink compositions, curing methods and equipment, cured-ink evaluations, screen printing inks, photoinitiators, and ink binders. The pollution and safety problems, and future trends of UV- and E-beam-cured printing inks are considered. Applications in screen printing on polyethylene or polypropylene bottles, and decorative printing of glass are also examined. (This updated bibliography contains 237 citations, 63 of which are new entries to the previous edition.)

  20. Behaviour Recovery. Second Edition

    Rogers, Bill

    2004-01-01

    This second edition of Behaviour Recovery puts emphasis on teaching behaviour concerning children with emotional and behavioural disorders (EBD). These children have many factors in their lives that affect their behaviour over which schools have limited control. This book acknowledges the challenge and explores the practical realities, options and…

  1. Newspaper Editing: English, Journalism.

    Bullock, Johanna

    A course designed to groom editors for the newspaper is presented. Editing copy, copyreading and proofreading, principles of headlining, responsibility of the press, libel and slander laws, and problems of censorship are covered. Course objectives include the following: (1) The student will recognize and correct all newspaper items that do not…

  2. Nair handbook. 1995 edition

    1995-01-01

    This Handbook contains general background, administrative and technical information for those participating in the National Arrangements for Incidents involving Radioactivity (NAIR), updating and replacing the previous edition published in 1987. The overriding need for revision was brought about as a result of changes introduced by British Telecom to the telephone numbers of establishments. (UK)

  3. En Garde: Fencing at Kansas City's Central Computers Unlimited/Classical Greek Magnet High School, 1991-1995

    Poos, Bradley W.

    2015-01-01

    Central High School in Kansas City, Missouri is one of the oldest schools west of the Mississippi and the first public high school built in Kansas City. Kansas City's magnet plan resulted in Central High School being rebuilt as the Central Computers Unlimited/Classical Greek Magnet High School, a school that was designed to offer students an…

  4. 26 CFR 1.642(c)-3 - Adjustments and other special rules for determining unlimited charitable contributions deduction.

    2010-04-01

    ... the gross income of the estate for 1972, and N University receives $100,000 from the estate in such... INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES... unlimited charitable contributions deduction. (a) Income in respect of a decedent. For purposes of §§ 1.642...

  5. Printed circuit for ATLAS

    Laurent Guiraud

    1999-01-01

    A printed circuit board made by scientists in the ATLAS collaboration for the transition radiaton tracker (TRT). This will read data produced when a high energy particle crosses the boundary between two materials with different electrical properties.

  6. Tokamaks (Second Edition)

    Stott, Peter [JET, UK (United Kingdom)

    1998-10-01

    The first edition of John Wesson's book on tokamaks, published in 1987, established itself as essential reading for researchers in the field of magnetic confinement fusion: it was an excellent introduction for students to tokamak physics and also a valuable reference work for the more experienced. The second edition, published in 1997, has been completely rewritten and substantially enlarged (680 pages compared with 300). The new edition maintains the aim of providing a simple introduction to basic tokamak physics, but also includes discussion of the substantial advances in fusion research during the past decade. The new book, like its predecessor, is well written and commendable for its clarity and accuracy. In fact many of the chapters are written by a series of co-authors bringing the benefits of a wide range of expertise but, by careful editing, Wesson has maintained a uniformity of style and presentation. The chapter headings and coverage for the most part remain the same - but are expanded considerably and brought up to date. The most substantial change is that the single concluding chapter in the first edition on 'Experiments' has been replaced by three chapters: 'Tokamak experiments' which deals with some of the earlier key experiments plus a selection of recent small and medium-sized devices, 'Large experiments' which gives an excellent summary of the main results from the four large tokamaks - TFTR, JET, JT60/JT60U and DIII-D, and 'The future' which gives a very short (possibly too short in my opinion) account of reactors and ITER. This is an excellent book, which I strongly recommend should have a place - on the desk rather than in the bookshelf - of researchers in magnetic confinement fusion. (book review)

  7. Tokamaks (Second Edition)

    Stott, Peter

    1998-01-01

    The first edition of John Wesson's book on tokamaks, published in 1987, established itself as essential reading for researchers in the field of magnetic confinement fusion: it was an excellent introduction for students to tokamak physics and also a valuable reference work for the more experienced. The second edition, published in 1997, has been completely rewritten and substantially enlarged (680 pages compared with 300). The new edition maintains the aim of providing a simple introduction to basic tokamak physics, but also includes discussion of the substantial advances in fusion research during the past decade. The new book, like its predecessor, is well written and commendable for its clarity and accuracy. In fact many of the chapters are written by a series of co-authors bringing the benefits of a wide range of expertise but, by careful editing, Wesson has maintained a uniformity of style and presentation. The chapter headings and coverage for the most part remain the same - but are expanded considerably and brought up to date. The most substantial change is that the single concluding chapter in the first edition on 'Experiments' has been replaced by three chapters: 'Tokamak experiments' which deals with some of the earlier key experiments plus a selection of recent small and medium-sized devices, 'Large experiments' which gives an excellent summary of the main results from the four large tokamaks - TFTR, JET, JT60/JT60U and DIII-D, and 'The future' which gives a very short (possibly too short in my opinion) account of reactors and ITER. This is an excellent book, which I strongly recommend should have a place - on the desk rather than in the bookshelf - of researchers in magnetic confinement fusion. (book review)

  8. First interim examination of defected BWR and PWR rods tested in unlimited air at 2290C

    Einziger, R.E.; Cook, J.A.

    1983-01-01

    A five-year whole rod test was initiated to investigate the long-term stability of spent fuel rods under a variety of possible dry storage conditions. Both PWR and BWR rods were included in the test. The first interim examination was conducted after three months of testing to determine if there was any degradation in those defected rods stored in an unlimited air atmosphere. Visual observations, diametral measurements and radiographic smears were used to assess the degree of cladding deformation and particulate dispersal. The PWR rod showed no measurable change from the pre-test condition. The two original artificial defects had not changed in appearance and there was no diametral growth of the cladding. One of the defects in BWR rod showed significant deformation. There was approximately 10% cladding strain at the defect site and a small axial crack had formed. The fuel in the defect did not appear to be friable. The second defect showed no visible change and no cladding strain. Following examination, the test was continued at 230 0 C. Another interim examination is planned during the summer of 1983. This paper discusses the details and meaning of the data from the first interim examination

  9. Unlimited cooling capacity of the passive-type emergency core cooling system of the MARS reactor

    Bandini, G.; Caira, M.; Naviglio, A.; Sorabella, L.

    1995-01-01

    The MARS nuclear plant is equipped with a 600 MWth PWR type nuclear steam supply system, with completely innovative engineered core safeguards. The most relevant innovative safety system of this plant is its Emergency Core Cooling System, which is completely passive (with only one non static component). The Emergency Core Cooling System (ECCS) of the MARS reactor is natural-circulation, passive-type, and its intervention follows a core flow decrease, whatever was the cause. The operation of the system is based on a cascade of three fluid systems, functionally interfacing through heat exchangers; the first fluid system is connected to the reactor vessel and the last one includes an atmospheric-pressure condenser, cooled by external air. The infinite thermal capacity of the final heat sink provides the system an unlimited autonomy. The capability and operability of the system are based on its integrity and on the integrity of the primary coolant boundary (both of them are permanently enclosed in a pressurized containment; 100% redundancy is also foreseen) and on the operation of only one non static component (a check valve), with 400% redundancy. In the paper, all main thermal hydraulic transients occurring as a consequence of postulated accidents are analysed, to verify the capability of the passive-type ECCS to intervene always in time, without causing undue conditions of reduced coolability of the core (DNB, etc.), and to verify its capability to guarantee a long-term (indefinite) coolability of the core without the need of any external intervention. (author)

  10. Evidence for unlimited capacity processing of simple features in visual cortex.

    White, Alex L; Runeson, Erik; Palmer, John; Ernst, Zachary R; Boynton, Geoffrey M

    2017-06-01

    Performance in many visual tasks is impaired when observers attempt to divide spatial attention across multiple visual field locations. Correspondingly, neuronal response magnitudes in visual cortex are often reduced during divided compared with focused spatial attention. This suggests that early visual cortex is the site of capacity limits, where finite processing resources must be divided among attended stimuli. However, behavioral research demonstrates that not all visual tasks suffer such capacity limits: The costs of divided attention are minimal when the task and stimulus are simple, such as when searching for a target defined by orientation or contrast. To date, however, every neuroimaging study of divided attention has used more complex tasks and found large reductions in response magnitude. We bridged that gap by using functional magnetic resonance imaging to measure responses in the human visual cortex during simple feature detection. The first experiment used a visual search task: Observers detected a low-contrast Gabor patch within one or four potentially relevant locations. The second experiment used a dual-task design, in which observers made independent judgments of Gabor presence in patches of dynamic noise at two locations. In both experiments, blood-oxygen level-dependent (BOLD) signals in the retinotopic cortex were significantly lower for ignored than attended stimuli. However, when observers divided attention between multiple stimuli, BOLD signals were not reliably reduced and behavioral performance was unimpaired. These results suggest that processing of simple features in early visual cortex has unlimited capacity.

  11. Fabrication of Pt nanowires with a diffraction-unlimited feature size by high-threshold lithography

    Li, Li; Zhang, Ziang; Yu, Miao; Song, Zhengxun; Weng, Zhankun; Wang, Zuobin; Li, Wenjun; Wang, Dapeng; Zhao, Le; Peng, Kuiqing

    2015-01-01

    Although the nanoscale world can already be observed at a diffraction-unlimited resolution using far-field optical microscopy, to make the step from microscopy to lithography still requires a suitable photoresist material system. In this letter, we consider the threshold to be a region with a width characterized by the extreme feature size obtained using a Gaussian beam spot. By narrowing such a region through improvement of the threshold sensitization to intensity in a high-threshold material system, the minimal feature size becomes smaller. By using platinum as the negative photoresist, we demonstrate that high-threshold lithography can be used to fabricate nanowire arrays with a scalable resolution along the axial direction of the linewidth from the micro- to the nanoscale using a nanosecond-pulsed laser source with a wavelength λ 0  = 1064 nm. The minimal feature size is only several nanometers (sub λ 0 /100). Compared with conventional polymer resist lithography, the advantages of high-threshold lithography are sharper pinpoints of laser intensity triggering the threshold response and also higher robustness allowing for large area exposure by a less-expensive nanosecond-pulsed laser

  12. What is happening with our printed newspapers?

    Jevtović Zoran

    2013-01-01

    Full Text Available The changes that have occurred in the first decade of this century have dramatically shook the media, especially printed newspapers. Based on the comparative studies on media system in wealthy, developing countries and southern European countries, we came to conclusion that the internet is not the main cause of the newspaper industry collapse, at the time of the increased use of the internet and the decline of newspaper circulation. Internet is and will always be the important factor, but this is the crisis that has hit the media the most, especially the advertising the newspapers depended on. Although internet did not kill printed newspapers, some sites destroyed profitable category of advertising in newspapers, which evolved along with them. In such circumstances, printed newspapers, if tailored to measure the audience, can still play an important role in society. Journalism remains the basis of the media, as the largest source of information, and newspapers content, in new circumstances, is not used for news, but for reflection and background. All this indicates that we now have the domination of mixed media use, the coexistence of old and new, because wherever they are, new media always complement the old media, rather than change them. Most of the news that is shared on-line is manufactured in traditional media organizations, and newspapers and television produce more news and reach larger audience than any other media organization. That is how the new time has imposed the new modified business model that combines print and digital edition, sales and advertising and is based on loyal audience.

  13. Print Quality of Ink Jet Printed PVC Foils

    Nemanja Kašiković

    2015-09-01

    Full Text Available Digital printing technique is used for a wide variety of substrates, one of which are PVC foils. Samples used in this research were printed by digital ink jet printing technique using Mimaki JV22 printing machine and J-Eco Subly Nano inks. As printing substrates, two different types of materials were used (ORACAL 640 - Print Vinyl and LG Hausys LP2712. A test card consisting of fields of CMYK colours was created and printed, varying the number of ink layers applied. Samples were exposed to light after the printing process. Spectrophotometric measurements were conducted before and after the light treatment. Based on spectrophotometricaly obtained data, colour differences ΔE2000 were calculated. Results showed that increasing number of layers, as well as the right choice of substrates, can improve the behaviour of printed product during exploitation.

  14. Poetic prayer as a "text in text" in Ukrainian Cyrillic editions of the Baroque age

    Kurhanova O.

    2016-01-01

    Full Text Available The article observes a prayer as a meta-genre of Baroque Ukrainian poetry, found at the pages of Ukrainian Cyrillic religious editions of the late 16th - early 18th centuries. Double nature of baroque poetic prayer is underlined. Poetic prayer originates from the tradition of liturgical prayer and contains it as a "text in text", at the same time poetical prayer is inserted as a "text in text" into the editions, in which it is printed. Two types of semantic connections between baroque poetic prayers and the text of their editions are described. The first type is presented by the poetry, which contains an image of a person, who took part in the text creation and in the process of its edition: the author/editor (in the role of the prayer addresser or the patron of art (in the role of a person, about whom the prayer request was made. The topics of prayer appellations in the poetry of this group are requests for earthly and heavenly boons for the author/editor/patron of the edition, for positive reception of the book; thanksgivings for the help in the book writing/publishing etc. The poetry of the second type contains images, which are central for the text of an edition. These are, as a rule, addressees of the prayer text - God, Saint Virgin, Angels and Saints. The content of a prayer appeal in the poetry of this type is a request for salvation and help in spiritual self-perfection of a lyric hero or a church community. It is defined that the content of poetic prayers, printed at pages of Cyrillic editions of the late 16th - early 18th centuries, was influenced both by text elements of the edition (topic, central images, and by non-textual factors (illustration plot, accompanied by a poem, prayer intention of an author/editor, existence of a patron of edition, different circumstances of editorial process etc.

  15. A font and size-independent OCR system for printed Kannada ...

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    put is an editable computer file containing the information in the printed page. ...... The work reported in this paper is partially supported by a project under the ... guage Technology Solutions – Kannada programme of the TDIL Group of the ...

  16. Fan edits and the legacy of The Phantom Edit

    Joshua Wille

    2014-09-01

    Full Text Available A fan edit can generally be defined as an alternative version of a film or television text created by a fan. It offers a different viewing experience, much as a song remix offers a different listening experience. The contemporary wave of fan edits has emerged during the remix zeitgeist of digital media and at a time when digital video editing technology has become more affordable and popular. The increasing number of alternative versions of films and the works of revisionist Hollywood filmmakers such as George Lucas have contributed to a greater public understanding of cinema as a fluid medium instead of one that exists in a fixed form. The Phantom Edit (2000, a seminal fan edit based on Lucas's Star Wars Episode I: The Phantom Menace (1999, inspired new ranks of fan editors. However, critics have misunderstood fan edits as merely the work of disgruntled fans. In order to provide a critical and historical basis for studies in fan editing as a creative practice, I examine previous interpretations of fan edits in the context of relevant contemporary works, and I use an annotated chronology of The Phantom Edit to trace its influence on subsequent fan editing communities and uncover their relationship with intellectual property disputes.

  17. Limited Resources, Unlimited Wants. Environment Booklet 2. Teacher's Edition=Recursos limitados, deseos ilimitados. Libro del medio ambiente 2. Manual para El Maestro.

    California State Univ., Los Angeles. National Dissemination and Assessment Center.

    The booklet is part of a grade 10-12 social studies series produced for bilingual education. The series consists of six major thematic modules, with four to five booklets in each. The interdisciplinary modules are based on major ideas and are designed to help students understand some major human problems and make sound, responsive decisions to…

  18. Designing Leadership models in a Three Level Unlimited Supply Chain: Non-Cooperative Game Theory Approach

    Ahmad Jaafarnehad

    2015-09-01

    Full Text Available The role and importance of supply chain management, has faced with many challenges and problems. Although a comprehensive model of supply chain issues, has not been explained, we have to indicate that issues such as reviewing the theoretical foundations of information systems, marketing, financial management, logistical and organizational relations have been considered by many researchers. The objective of supply chain management is to improve various activities and components to increase overall supply chain system benefits. In order to achieve the overall objectives, many contradictions may occur between the components and different levels of supply chain and the contradictions that these disorders over time, result in decreased strength and competitiveness of the supply chain. Such conflicts, like marketing costs (advertising, pricing and inventory can occur during the supply chain life cycle. A Game Theory approach with respect to property is the appropriate tool for collaboration in the supply chain. This tool is used for collaborative making in any kind of supply chain such as cooperative supply chain and non-cooperative supply chain. In the present study and assuming a lack of cooperation between different levels of a supply chain, a dynamic game with complete information has been generated. In addition identifying appropriate leaders of various levels of the supply chain is considered. Non-Cooperative dynamic game mode (Stackelberg Game, for each of the three levels of supply chain including retailers, suppliers and manufacturers are modeled. Depending on the bargaining power and its position in the market, any level of supply chain can make a leader of the following rule. In the present study, the equilibrium model to play Stackelberg game may be led by a leader or leading players and ultimately identifying and modeling the appropriate unlimited three level supply chain are determined.

  19. All you can eat: is food supply unlimited in a colonially breeding bird?

    Hoi, Herbert; Krištofík, Ján; Darolová, Alžbeta

    2015-01-01

    Food availability is generally considered to determine breeding site selection and therefore plays an important role in hypotheses explaining the evolution of colony formation. Hypotheses trying to explain why birds join a colony usually assume that food is not limited, whereas those explaining variation in colony size suggest that food is under constraint. In this study, we investigate the composition and amount of food items not eaten by the nestlings and found in nest burrows of colonially nesting European bee-eaters (Merops apiaster). We aimed to determine whether this unconsumed food is an indicator of unlimited food supply, the result of mistakes during food transfer between parents and chicks or foraging selectivity of chicks. Therefore, we investigated the amount of dropped food for each nest in relation to reproductive performance and parameters reflecting parental quality. Our data suggest that parents carry more food to the nest than chicks can eat and, hence, food is not limited. This assumption is supported by the facts that there is a positive relationship between dropped food found in a nest and the number of fledglings, nestling age, and chick health condition and that the amount of dropped food is independent of colony size. There is variation in the amount of dropped food within colonies, suggesting that parent foraging efficiency may also be an important determinant. Pairs nesting in the center of a colony performed better than those nesting on the edge, which supports the assumption that quality differences between parents are important as well. However, dropped food cannot be used as an indicator of local food availability as (1) within-colony variation in dropped food is larger than between colony variation and, (2) the average amount of dropped food is not related to colony size.

  20. Preface to Special Edition

    Renee Nathanson

    2012-04-01

    Full Text Available Given that reading comprehension is at the forefront of global literacy discourse, this special edition of Per Linguam, the first number that is also published online, features a collection of articles that cover different aspects of reading comprehension and instruction, such as, strategies for comprehending texts, metacognitive awareness, the reciprocity of assessment and comprehension instruction and socio-affective factors that influence comprehension.

  1. Genome Editing of Monkey.

    Liu, Zhen; Cai, Yijun; Sun, Qiang

    2017-01-01

    Gene-modified monkey models would be particularly valuable in biomedical and neuroscience research. Virus-based transgenic and programmable nucleases-based site-specific gene editing methods (TALEN, CRISPR-cas9) enable the generation of gene-modified monkeys with gain or loss of function of specific genes. Here, we describe the generation of transgenic and knock-out (KO) monkeys with high efficiency by lentivirus and programmable nucleases.

  2. Printed Spacecraft Separation System

    Dehoff, Ryan R [ORNL; Holmans, Walter [Planetary Systems Corporation

    2016-10-01

    In this project Planetary Systems Corporation proposed utilizing additive manufacturing (3D printing) to manufacture a titanium spacecraft separation system for commercial and US government customers to realize a 90% reduction in the cost and energy. These savings were demonstrated via “printing-in” many of the parts and sub-assemblies into one part, thus greatly reducing the labor associated with design, procurement, assembly and calibration of mechanisms. Planetary Systems Corporation redesigned several of the components of the separation system based on additive manufacturing principles including geometric flexibility and the ability to fabricate complex designs, ability to combine multiple parts of an assembly into a single component, and the ability to optimize design for specific mechanical property targets. Shock absorption was specifically targeted and requirements were established to attenuate damage to the Lightband system from shock of initiation. Planetary Systems Corporation redesigned components based on these requirements and sent the designs to Oak Ridge National Laboratory to be printed. ORNL printed the parts using the Arcam electron beam melting technology based on the desire for the parts to be fabricated from Ti-6Al-4V based on the weight and mechanical performance of the material. A second set of components was fabricated from stainless steel material on the Renishaw laser powder bed technology due to the improved geometric accuracy, surface finish, and wear resistance of the material. Planetary Systems Corporation evaluated these components and determined that 3D printing is potentially a viable method for achieving significant cost and savings metrics.

  3. Printing at CERN

    Otto, R

    2007-01-01

    For many years CERN had a very sophisticated print server infrastructure which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today’s situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer regis...

  4. CERN printing infrastructure

    Otto, R; Sucik, J

    2008-01-01

    For many years CERN had a very sophisticated print server infrastructure [13] which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today's situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer registration in the network database. At the end of 2006 we have moved all (∼1200) CERN printers and all users' connections at CERN to the new service. This paper will describe the new architecture and summarize the process of migration

  5. Application to printed resistors

    Hachiyanagi, Yoshimi; Uraki, Hisatsugu; Sawamura, Masashi

    1989-01-01

    Most of printed circuit boards are made at present by etching copper foils which are laminated on insulating composite boards of paper/phenol resin or glass nonwoven fabric/epoxy rein. This is called subtractive process, and since this is a wet process, the problem of coping with the pollution due to etching solution, plating solution and others is involved. As the method of solving this problem, attention has been paid to the dry process which forms conductor patterns by screen printing using electro-conductive paste. For such resin substrates, generally polymer thick films (PTF) using thermosetting resin as the binder are used. Also the research on the formation of resistors, condensers and other parts by printing using the technology of cermet thick films (CTF) and PTF is active, and it is partially put in practical use. The problems are the deformation and deterioration of substrates, therefore, as the countermeasures, electron beam hardening type PTF has been studied, and various pastes have been developed. In this paper, electron beam hardening type printed resistors are reported. The features, resistance paste, and a number of the experiments on printed resistors are described. (K.I.)

  6. CERN printing infrastructure

    Otto, R; Sucik, J [CERN, Geneva (Switzerland)], E-mail: Rafal.Otto@cern.ch, E-mail: Juraj.Sucik@cern.ch

    2008-07-15

    For many years CERN had a very sophisticated print server infrastructure [13] which supported several different protocols (AppleTalk, IPX and TCP/IP) and many different printing standards. Today's situation differs a lot: we have a much more homogenous network infrastructure, where TCP/IP is used everywhere and we have less printer models, which almost all work using current standards (i.e. they all provide PostScript drivers). This change gave us the possibility to review the printing architecture aiming at simplifying the infrastructure in order to achieve full automation of the service. The new infrastructure offers both: LPD service exposing print queues to Linux and Mac OS X computers and native printing for Windows based clients. The printer driver distribution is automatic and native on Windows and automated by custom mechanisms on Linux, where the appropriate Foomatic drivers are configured. Also the process of printer registration and queue creation is completely automated following the printer registration in the network database. At the end of 2006 we have moved all ({approx}1200) CERN printers and all users' connections at CERN to the new service. This paper will describe the new architecture and summarize the process of migration.

  7. CAD-CAM printed circuit board design

    Agy, W. E.

    A step-by-step procedure for a printed circuit design achieved by CAD is presented. The operator at the interactive CRT station moves a stylus across a graphics tablet and intersperses commands which result in computer-generated pictorial forms on the screen that were drawn on the pad. Standard symbols are used for commands allowing, for instance, connections to be made of specific types in certain locations, which can be automatically edited from a materials list. An entire network of drawn lines can be referenced by a signal name for recall, and a finished circuit schematic can be checked for designs rules compliance, including fault reporting in terms of designator/pin number. A map may be present delineating the boundaries of the circuitry area, and previously completed circuitry segments can be recalled for piece-by-piece assembly of the circuit board.

  8. Computer Security: Printing confidentially

    Stefan Lueders, Computer Security Team

    2015-01-01

    Have you ever hesitated to print a confidential document using CERN printers? Or perhaps you have rushed quickly to the printer after hitting the “print” button in order to avoid someone else getting hold of and reading your document? These times are over now with the new printing infrastructure!   Indeed, many of us regularly print out confidential documents like our salary slips, MARS forms, tendering documents and drafts of preliminary papers. The upcoming CERN data protection policy will require all of us to respect the confidentiality of such documents and, as the word “confidential” implies, access to “confidential” or sensitive documents will be tightly controlled. What can we do about the public printers located in many buildings, floors and shared spaces - accessible not only to CERN staff and users but also to visitors and guests? Some printers are located in the vicinity of restaurants, cafeterias or close to paths taken b...

  9. Revising and editing for translators

    Mossop, Brian

    2014-01-01

    Revising and Editing for Translators provides guidance and learning materials for translation students learning to edit texts written by others, and professional translators wishing to improve their self-revision ability or learning to revise the work of others. Editing is understood as making corrections and improvements to texts, with particular attention to tailoring them to the given readership. Revising is this same task applied to draft translations. The linguistic work of editors and revisers is related to the professional situations in which they work. Mossop offers in-depth coverage of a wide range of topics, including copyediting, style editing, structural editing, checking for consistency, revising procedures and principles, and translation quality assessment. This third edition provides extended coverage of computer aids for revisers, and of the different degrees of revision suited to different texts. The inclusion of suggested activities and exercises, numerous real-world examples, a proposed gra...

  10. Printed MIMO antenna engineering

    Sharawi, Mohammad S

    2014-01-01

    Wireless communications has made a huge leap during the past two decades. The multiple-input-multiple-output (MIMO) technology was proposed in the 1990's as a viable solution that can overcome the data rate limit experienced by single-input-single-output (SISO) systems. This resource is focused on printed MIMO antenna system design. Printed antennas are widely used in mobile and handheld terminals due to their conformity with the device, low cost, good integration within the device elements and mechanical parts, as well as ease of fabrication.A perfect design companion for practicing engineers

  11. Primer printed circuit boards

    Argyle, Andrew

    2009-01-01

    Step-by-step instructions for making your own PCBs at home. Making your own printed circuit board (PCB) might seem a daunting task, but once you master the steps, it's easy to attain professional-looking results. Printed circuit boards, which connect chips and other components, are what make almost all modern electronic devices possible. PCBs are made from sheets of fiberglass clad with copper, usually in multiplelayers. Cut a computer motherboard in two, for instance, and you'll often see five or more differently patterned layers. Making boards at home is relatively easy

  12. Plasmonic colour laser printing

    Zhu, Xiaolong; Vannahme, Christoph; Højlund-Nielsen, Emil

    2016-01-01

    -beam lithography (EBL) or focused ion beam (FIB), both expensive and not scalable processes that are not suitable for post-processing customization. Here we show a method of colour printing on nanoimprinted plasmonic metasurfaces using laser post-writing. Laser pulses induce transient local heat generation...... that leads to melting and reshaping of the imprinted nanostructures. Depending on the laser pulse energy density, different surface morphologies that support different plasmonic resonances leading to different colour appearances can be created. Using this technique we can print all primary colours...

  13. The New Edition of Chopin’s Correspondence

    Helman-Bednarczyk Zofia

    2016-12-01

    Full Text Available Some of Fryderyk Chopin’s letters were published individually or in groups already in the 2nd half of the 19th century. With the passage of time, more letters from and to Chopin were printed in monographs dedicated to his life and work. The first editions of Chopin’s collected letters come from the 1st half of the 20th century (by Scharlitt and von Guttry in Germany, Henryk Opieński – in Poland. B.E. Sydow’s Fryderyk Chopin’s Correspondence of 1955 continues to be used as the basic source edition by Chopin biographers. It has many strong points, but has become largely outdated.

  14. Advances in Home Photo Printing

    Qian Lin; Brian Atkins; Huitao Luo

    2004-01-01

    With digital camera adoptions going main stream, consumers capture a record number of photos.Currently, the majority of the digital photos are printed at home. One of the key enablers of this transformation is the advancement of home photo printing technologies. In the past few years, inkjet printing technologies have continued to deliver smaller drop size, larger number of inks, and longer-lasting prints. In the mean time, advanced image processing automatically enhances captured digital photos while being printed. The combination of the above two forces has closed the gap between the home photo prints and AgX prints. It will give an overview of the home photo printing market and technology trends, and discuss major advancements in automatic image processing.

  15. REDIdb: the RNA editing database.

    Picardi, Ernesto; Regina, Teresa Maria Rosaria; Brennicke, Axel; Quagliariello, Carla

    2007-01-01

    The RNA Editing Database (REDIdb) is an interactive, web-based database created and designed with the aim to allocate RNA editing events such as substitutions, insertions and deletions occurring in a wide range of organisms. The database contains both fully and partially sequenced DNA molecules for which editing information is available either by experimental inspection (in vitro) or by computational detection (in silico). Each record of REDIdb is organized in a specific flat-file containing a description of the main characteristics of the entry, a feature table with the editing events and related details and a sequence zone with both the genomic sequence and the corresponding edited transcript. REDIdb is a relational database in which the browsing and identification of editing sites has been simplified by means of two facilities to either graphically display genomic or cDNA sequences or to show the corresponding alignment. In both cases, all editing sites are highlighted in colour and their relative positions are detailed by mousing over. New editing positions can be directly submitted to REDIdb after a user-specific registration to obtain authorized secure access. This first version of REDIdb database stores 9964 editing events and can be freely queried at http://biologia.unical.it/py_script/search.html.

  16. 3D Printing A Survey

    Muhammad Zulkifl Hasan

    2017-08-01

    Full Text Available Solid free fabrication SFF are produced to enhance the printing instrument utilizing distinctive strategies like Piezo spout control multi-spout injet printers or STL arrange utilizing cutting information. The procedure is utilized to diminish the cost and enhance the speed of printing. A few techniques take long at last because of extra process like dry the printing. This study will concentrate on SFFS utilizing UV gum for 3D printing.

  17. The Craft of Editing

    Moeran, Brian

    To edit is to make a choice, or series of choices. Will I write a rough draft of this essay in longhand, or hammer it out on my computer? If the latter, what font shall I use? Times New Roman, Book Antiqua, or Garamond? Once I get started, what style shall I adopt: realistic, confessional or impr...... or impressionistic; or a combination of all three (Van Maanen 1988)? Should I try to impress with ‘learned scholarship’, or should I merely outline in conversational English a few thoughts based on my own experiences?...

  18. A laser printing based approach for printed electronics

    Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J., E-mail: jyang@eng.uwo.ca [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Liu, Y.; Lau, W. [Chengdu Green Energy and Green Manufacturing Technology R& D Center, 355 Tengfei Road, 620107 Chengdu (China); Wang, X. [Department of Mechanical and Materials Engineering, Western University, London N6A 3K7 (Canada); Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

    2016-03-07

    Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

  19. A laser printing based approach for printed electronics

    Zhang, T.; Hu, M.; Guo, Q.; Zhang, W.; Yang, J.; Liu, Y.; Lau, W.; Wang, X.

    2016-01-01

    Here we report a study of printing of electronics using an office use laser printer. The proposed method eliminates those critical disadvantages of solvent-based printing techniques by taking the advantages of electroless deposition and laser printing. The synthesized toner acts as a catalyst for the electroless copper deposition as well as an adhesion-promoting buffer layer between the substrate and deposited copper. The easy metallization of printed patterns and strong metal-substrate adhesion make it an especially effective method for massive production of flexible printed circuits. The proposed process is a high throughput, low cost, efficient, and environmentally benign method for flexible electronics manufacturing.

  20. Print Advertisements in Malaysia

    Hashim, Azirah

    2010-01-01

    This paper examines print advertisements in Malaysia to determine how advertisers seek to achieve their primary goal of persuading or influencing an audience by the use of both language and visuals. It describes the main component moves and rhetorical strategies used by writers to articulate the communicative purpose of the genre and the language…

  1. Linoleum Block Printing Revisited.

    Chetelat, Frank J.

    1980-01-01

    The author discusses practical considerations of teaching linoleum block printing in the elementary grades (tool use, materials, motivation) and outlines a sequence of design concepts in this area for the primary, intermediate and junior high grades. A short list of books and audiovisual aids is appended. (SJL)

  2. "Printed-circuit" rectenna

    Dickinson, R. M.

    1977-01-01

    Rectifying antenna is less bulky structure for absorbing transmitted microwave power and converting it into electrical current. Printed-circuit approach, using microstrip technology and circularly polarized antenna, makes polarization orientation unimportant and allows much smaller arrays for given performance. Innovation is particularly useful with proposed electric vehicles powered by beam microwaves.

  3. Print advertising: vivid content

    Fennis, B.M.; Das, E.; Fransen, M.L.

    2012-01-01

    The present research examines the effects of vivid ad content in two types of appeal in print ads as a function of individual differences in chronically experienced vividness of visual imagery. For informational ads for a functional product, vivid ad content strongly affected individuals high in

  4. Print advertising : Vivid content

    Fennis, B.M.; Das, E.H.H.J.; Fransen, M.L.

    The present research examines the effects of vivid ad content in two types of appeal in print ads as a function of individual differences in chronically experienced vividness of visual imagery. For informational ads for a functional product, vivid ad content strongly affected individuals high in

  5. With this Special Edition

    Oscar Antonio Martínez Molina

    2017-02-01

    Full Text Available With this Special Edition, the refereed Scientific Magazine, published in February 2017, presents a nourished and multidisciplinary theme, from the relationship of Environmental Education, in this ecological sharing man-environment; the social responsibility from the Management environment and the motivational values ​​conducive to the teaching performance in the different educational levels. Twenty-five (25 articles, generated from research production in university environments at the International level, are a signature of the quality of articles / essays presented in this Special Edition. Several reasons motivate the literary pen of our authors, adjusting to the rhythm of the times and the use of new technologies; and in correspondence with the care of the environment, this way of disseminating and making visible the scientific contents of humanistic and social court, support the care and protection of the forests, being an online production, in the Cloud. Thanks to the support of the Instituto Internacional de Investigación y Desarrollo Tecnológico Educativo INDTEC, CA, Scientific Magazine has been able to develop from the cooperative work of the people who compose its different committees: Editorial Academic Committee, Academic Scientific Committee and the Arbitrators in the review and valuation of the quality of the articles. With these assets, the Scientific Magazine, opening to the general public and especially to the academic new intellectual horizons.

  6. Natural Hazards, Second Edition

    Rouhban, Badaoui

    Natural disaster loss is on the rise, and the vulnerability of the human and physical environment to the violent forces of nature is increasing. In many parts of the world, disasters caused by natural hazards such as earthquakes, floods, landslides, drought, wildfires, intense windstorms, tsunami, and volcanic eruptions have caused the loss of human lives, injury, homelessness, and the destruction of economic and social infrastructure. Over the last few years, there has been an increase in the occurrence, severity, and intensity of disasters, culminating with the devastating tsunami of 26 December 2004 in South East Asia.Natural hazards are often unexpected or uncontrollable natural events of varying magnitude. Understanding their mechanisms and assessing their distribution in time and space are necessary for refining risk mitigation measures. This second edition of Natural Hazards, (following a first edition published in 1991 by Cambridge University Press), written by Edward Bryant, associate dean of science at Wollongong University, Australia, grapples with this crucial issue, aspects of hazard prediction, and other issues. The book presents a comprehensive analysis of different categories of hazards of climatic and geological origin.

  7. Instrumental analysis, second edition

    Christian, G.D.; O'Reilly, J.E.

    1988-01-01

    The second edition of Instrumental Analysis is a survey of the major instrument-based methods of chemical analysis. It appears to be aimed at undergraduates but would be equally useful in a graduate course. The volume explores all of the classical quantitative methods and contains sections on techniques that usually are not included in a semester course in instrumentation (such as electron spectroscopy and the kinetic methods). Adequate coverage of all of the methods contained in this book would require several semesters of focused study. The 25 chapters were written by different authors, yet the style throughout the book is more uniform than in the earlier edition. With the exception of a two-chapter course in analog and digital circuits, the book purports to de-emphasize instrumentation, focusing more on the theory behind the methods and the application of the methods to analytical problems. However, a detailed analysis of the instruments used in each method is by no means absent. The book has the favor of a user's guide to analysis

  8. Solvents interactions with thermochromic print

    Mirela Rožić

    2017-12-01

    Full Text Available In this study, the interactions between different solvents (benzene, acetone, cyclohexanone, various alcohols and water and thermochromic printing ink were investigated. Thermochromic printing ink was printed on metal surface. Components of thermochromic printing inks are polymeric microcapsules and classic yellow offset printing ink. Below its activation temperature, dye and developer within the microcapsules form a blue coloured complex. Therefore, thermochromic print is green. By heating above the activation temperature, blue colour of the complex turns into the leuco dye colourless state and the green colour of the prints turns into the yellow colour of the classic offset pigment. The results of the interaction with various solvents show that the thermochromic print is stable in all tested solvents except in ethanol, acetone and cyclohexanone. In ethanol, the green colour of the print becomes yellow. SEM analysis shows that microcapsules are dissolved. In acetone and cyclohexanone, the green colour of the print turns into blue, and the microcapsules become significantly more visible. Thus, the yellow pigment interacts with examined ketones. Based on the obtained interactions it can be concluded that the microcapsules have more polar nature than the classical pigment particles. Solvent-thermocromic print interactions were analysed using Hansen solubility parameters that rank the solvents based on their estimated interaction capabilities.

  9. The Elementary School Library Collection: A Guide to Books and Other Media, Phases 1-2-3. 20th Edition.

    Homa, Linda L., Ed.; And Others

    This collection development aid lists more than 10,000 titles of children's materials available in a variety of formats (in addition to print materials, the guide also includes sound recordings, video cassettes, microcomputer software programs, CD-ROM products, and videodiscs). This 20th anniversary edition contains several special features,…

  10. Developments in the recovery of colour in fine art prints using spatial image processing

    Rizzi, A; Parraman, C

    2010-01-01

    Printmakers have at their disposal a wide range of colour printing processes. The majority of artists will utilise high quality materials with the expectation that the best materials and pigments will ensure image permanence. However, as many artists have experienced, this is not always the case. Inks, papers and materials can deteriorate over time. For artists and conservators who need to restore colour or tone to a print could benefit from the assistance of spatial colour enhancement tools. This paper studies two collections from the same edition of fine art prints that were made in 1991. The first edition has been kept in an archive and not exposed to light. The second edition has been framed and exposed to light for about 18 years. Previous experiments using colour enhancement methods [9,10] have involved a series of photographs that had been taken under poor or extreme lighting conditions, fine art works, scanned works. There are a range of colour enhancement methods: Retinex, RSR, ACE, Histogram Equalisation, Auto Levels, which are described in this paper. In this paper we will concentrate on the ACE algorithm and use a range of parameters to process the printed images and describe these results.

  11. Developments in the recovery of colour in fine art prints using spatial image processing

    Rizzi, A.; Parraman, C.

    2010-06-01

    Printmakers have at their disposal a wide range of colour printing processes. The majority of artists will utilise high quality materials with the expectation that the best materials and pigments will ensure image permanence. However, as many artists have experienced, this is not always the case. Inks, papers and materials can deteriorate over time. For artists and conservators who need to restore colour or tone to a print could benefit from the assistance of spatial colour enhancement tools. This paper studies two collections from the same edition of fine art prints that were made in 1991. The first edition has been kept in an archive and not exposed to light. The second edition has been framed and exposed to light for about 18 years. Previous experiments using colour enhancement methods [9,10] have involved a series of photographs that had been taken under poor or extreme lighting conditions, fine art works, scanned works. There are a range of colour enhancement methods: Retinex, RSR, ACE, Histogram Equalisation, Auto Levels, which are described in this paper. In this paper we will concentrate on the ACE algorithm and use a range of parameters to process the printed images and describe these results.

  12. Cumulating the Supplements to the Seventh Edition of LC Subject Headings

    Roy B. Torkington

    1973-12-01

    Full Text Available A description is presented of the project of the University of California Library Automation Program to cumulate the 1966 through 1971 supplements to the Library of Congress Subject Headings. The University of California Institute of Library Research MARC processing software, BIBCON, was used, with specially written programs. The resulting cumulation was edited, printed in book form, and made available to libraries. The final task involved merging six MARC files into one file of over 125,000 records and then printing that file in a format similar to that of LC Subject Headings. The project was a cooperative effort with participation by people from several UC campuses.

  13. Fundamentals of Welding. Teacher Edition [and] Student Edition [and] Student Workbook. Second Edition.

    Fortney, Clarence; Gregory, Mike; New, Larry

    Teacher and student editions and a student workbook for fundamentals of welding comprise the first of six in a series of competency-based instructional materials for welding programs. Introductory pages in the teacher edition are training and competency profile, instructional/task analysis, basic skills icons and classifications, basic skills…

  14. Oxyacetylene Welding and Oxyfuel Cutting. Third Edition. Teacher Edition [and] Student Edition [and] Student Workbook.

    Knapp, John; Harper, Eddie

    This Oklahoma curriculum guide, which includes a teacher edition, a student edition, and a student workbook, provides three units for a course on oxyacetylene welding, oxyfuel cutting, and cutting done with alternative fuels such as MAPP, propane, and natural gas. The three units are: "Oxyacetylene Welding"; "Oxyfuel Cutting";…

  15. Residential and Light Commercial HVAC. Teacher Edition and Student Edition. Second Edition.

    Stephenson, David

    This package contains teacher and student editions of a residential and light commercial heating, ventilation, and air conditioning (HVAC) course of study. The teacher edition contains information on the following: using the publication; national competencies; competency profile; related academic and workplace skills list; tools, equipment, and…

  16. Biomimetic 4D printing

    Sydney Gladman, A.; Matsumoto, Elisabetta A.; Nuzzo, Ralph G.; Mahadevan, L.; Lewis, Jennifer A.

    2016-04-01

    Shape-morphing systems can be found in many areas, including smart textiles, autonomous robotics, biomedical devices, drug delivery and tissue engineering. The natural analogues of such systems are exemplified by nastic plant motions, where a variety of organs such as tendrils, bracts, leaves and flowers respond to environmental stimuli (such as humidity, light or touch) by varying internal turgor, which leads to dynamic conformations governed by the tissue composition and microstructural anisotropy of cell walls. Inspired by these botanical systems, we printed composite hydrogel architectures that are encoded with localized, anisotropic swelling behaviour controlled by the alignment of cellulose fibrils along prescribed four-dimensional printing pathways. When combined with a minimal theoretical framework that allows us to solve the inverse problem of designing the alignment patterns for prescribed target shapes, we can programmably fabricate plant-inspired architectures that change shape on immersion in water, yielding complex three-dimensional morphologies.

  17. Volcanoes, Third Edition

    Nye, Christopher J.

    It takes confidence to title a smallish book merely “Volcanoes” because of the impliction that the myriad facets of volcanism—chemistry, physics, geology, meteorology, hazard mitigation, and more—have been identified and addressed to some nontrivial level of detail. Robert and Barbara Decker have visited these different facets seamlessly in Volcanoes, Third Edition. The seamlessness comes from a broad overarching, interdisciplinary, professional understanding of volcanism combined with an exceptionally smooth translation of scientific jargon into plain language.The result is a book which will be informative to a very broad audience, from reasonably educated nongeologists (my mother loves it) to geology undergraduates through professional volcanologists. I bet that even the most senior professional volcanologists will learn at least a few things from this book and will find at least a few provocative discussions of subjects they know.

  18. Method for production of fuel oils and diesel motor oils free of sediments and with unlimited miscibility

    1942-01-13

    A method is described for the production of fuel and diesel oils free of sediments and with unlimited miscibility by their recovery from substances poor in hydrogen, such as tars of fossil carbon, from lignite, from peat, from schist oils, from wood, or tar oils of corresponding extracts, poorly hydrogenated carbohydrates and the like, characterized by the fact that these substances are being subjected without mixing with selective solvents to a chemical purification and then immediately subjected to a redistillation and the obtained distillates being cut with hydrogen-rich oils to obtain normal diesel oils.

  19. Observation on optimal transition from conventional energy with resource constraints to advanced energy with virtually unlimited resource, (2)

    Ohkubo, Hiroo; Suzuki, Atsuyuki; Kiyose, Ryohei

    1983-01-01

    This is an extension of the Suzuki model (base model) on optimal transition from resource-limited energy (oil) to advanced energy with virtually unlimited resource. The finite length of plant life, fuel cost, technological progress factor of advanced energy and the upper limit upon annual consumption rate of oil are taken into account for such an extension. The difference in optimal solutions obtained from extended and base models is shown by an application of the maximum principle. The implication of advanced energy R and D andenergy conservation effort is also discussed. (author)

  20. [Preliminary textual research on Zhijintang Sanctum re-revised version of Jinling edition of Ben cao gang mu (Compendium of Materia Medica)].

    Zheng, Jinsheng

    2014-03-01

    The Zhijintang Sanctum version of the re-revised edition of Jinling edition of Ben cao gang mu (Compendium of Materia Medica)collected by Zhao Huiyuan of Baihe, Henan Province in 2008 was opted as one of the third batch of the National Directory of Rare Ancient Worksin 2010. On the second cover page (patent page), it is recorded as"Original Jiangxi version". However, it is investigated to find that most of its paper sheets were reprinted after the original Jinling version, only scores of paper sheets were supplemented block-printed, including the additional block-printed second preface and Li Jianyuan's submitted report of the Jiangxi version, the re-revised time of which should be after the Jiangxi edition, or 1603. The exact time can be determined only by checking it carefully against another Jinling re-revised version (the Sheyuantang Sanctum edition).

  1. Recent trends in print portals and Web2Print applications

    Tuijn, Chris

    2009-01-01

    For quite some time now, the printing business has been under heavy pressure because of overcapacity, dropping prices and the delocalization of the production to low income countries. To survive in this competitive world, printers have to invest in tools that, on one hand, reduce the production costs and, on the other hand, create additional value for their customers (print buyers). The creation of customer portals on top of prepress production systems allowing print buyers to upload their content, approve the uploaded pages based on soft proofs (rendered by the underlying production system) and further follow-up the generation of the printed material, has been illustrative in this respect. These developments resulted in both automation for the printer and added value for the print buyer. Many traditional customer portals assume that the printed products have been identified before they are presented to the print buyer in the portal environment. The products are, in this case, typically entered by the printing organization in a so-called MISi system after the official purchase order has been received from the print buyer. Afterwards, the MIS system then submits the product to the customer portal. Some portals, however, also support the initiation of printed products by the print buyer directly. This workflow creates additional flexibility but also makes things much more complex. We here have to distinguish between special products that are defined ad-hoc by the print buyer and standardized products that are typically selected out of catalogs. Special products are most of the time defined once and the level of detail required in terms of production parameters is quite high. Systems that support such products typically have a built-in estimation module, or, at least, a direct connection to an MIS system that calculates the prices and adds a specific mark-up to calculate a quote. Often, the markup is added by an account manager on a customer by customer basis; in this

  2. Durability of ink jet prints

    Dobric, E; Mirkovic, I Bolanca; Bolanca, Z

    2010-01-01

    The aim of this paper is the result presentation of some optical properties research for ink jet prints after: exposing the prints to the mixed daylight and artificial light, exposing of prints to the sun-light through the glass window, and exposing of prints to outdoor conditions during the summer months. The prints obtained by piezoelectric and thermal ink jet technologies were used in the researches. The dye-based inks and the pigmented inks based on water and the low solvent inks were used. The results of these researches, except the scientific contribution in the domain of understanding and explaining the environmental conditions on the gamut size, i.e. the range of color tonality, colorimetric stability and print quality, can be used by the ink and paper manufacturers in new formulations, offer data for the printer producers for further production and evaluation of the position of their products.

  3. Coexistence of unlimited bipartite and genuine multipartite entanglement: Promiscuous quantum correlations arising from discrete to continuous-variable systems

    Adesso, Gerardo; Ericsson, Marie; Illuminati, Fabrizio

    2007-01-01

    Quantum mechanics imposes 'monogamy' constraints on the sharing of entanglement. We show that, despite these limitations, entanglement can be fully 'promiscuous', i.e., simultaneously present in unlimited two-body and many-body forms in states living in an infinite-dimensional Hilbert space. Monogamy just bounds the divergence rate of the various entanglement contributions. This is demonstrated in simple families of N-mode (N≥4) Gaussian states of light fields or atomic ensembles, which therefore enable infinitely more freedom in the distribution of information, as opposed to systems of individual qubits. Such a finding is of importance for the quantification, understanding, and potential exploitation of shared quantum correlations in continuous variable systems. We discuss how promiscuity gradually arises when considering simple families of discrete variable states, with increasing Hilbert space dimension towards the continuous variable limit. Such models are somehow analogous to Gaussian states with asymptotically diverging, but finite, squeezing. In this respect, we find that non-Gaussian states (which in general are more entangled than Gaussian states) exhibit also the interesting feature that their entanglement is more shareable: in the non-Gaussian multipartite arena, unlimited promiscuity can be already achieved among three entangled parties, while this is impossible for Gaussian, even infinitely squeezed states

  4. Xenogeneic chimera-Generated by blastocyst complementation-As a potential unlimited source of recipient-tailored organs.

    Oldani, Graziano; Peloso, Andrea; Lacotte, Stéphanie; Meier, Raphael; Toso, Christian

    2017-07-01

    Blastocyst complementation refers to the injection of cells into a blastocyst. The technology allows for the creation of chimeric animals, which have the potential to be used as an unlimited source of organ donors. Pluripotent stem cells could be generated from a patient in need of a transplantation and injected into a large animal blastocyst (potentially of a pig), leading to the creation of organ(s) allowing immunosuppression-free transplantation. Various chimera combinations have already been generated, but one of the most recent steps leads to the creation of human-pig chimeras, which could be studied at an embryo stage. Although still far from clinical reality, the potential application is almost unlimited. The present review illustrates the historical steps of intra- and interspecific blastocyst complementation in rodents and large animals, specifically looking at its potential for generation of organ grafts. We also speculate on how it could change transplant indications, on its economic impact, and on the linked ethical concerns. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. 3D printing for dummies

    Hausman, Kalani Kirk

    2014-01-01

    Get started printing out 3D objects quickly and inexpensively! 3D printing is no longer just a figment of your imagination. This remarkable technology is coming to the masses with the growing availability of 3D printers. 3D printers create 3-dimensional layered models and they allow users to create prototypes that use multiple materials and colors.  This friendly-but-straightforward guide examines each type of 3D printing technology available today and gives artists, entrepreneurs, engineers, and hobbyists insight into the amazing things 3D printing has to offer. You'll discover methods for

  6. NCCI Medically Unlikely Edits (MUEs)

    U.S. Department of Health & Human Services — Medically Unlikely Edits (MUEs) define for each HCPCS / CPT code the maximum units of service (UOS) that a provider would report under most circumstances for a...

  7. [Preface for genome editing special issue].

    Gu, Feng; Gao, Caixia

    2017-10-25

    Genome editing technology, as an innovative biotechnology, has been widely used for editing the genome from model organisms, animals, plants and microbes. CRISPR/Cas9-based genome editing technology shows its great value and potential in the dissection of functional genomics, improved breeding and genetic disease treatment. In the present special issue, the principle and application of genome editing techniques has been summarized. The advantages and disadvantages of the current genome editing technology and future prospects would also be highlighted.

  8. Marine botany. Second edition

    Dawes, C.J.

    1998-01-01

    Marine plants are a diverse group that include unicellular algae, seaweeds, seagrasses, salt marshes, and mangrove forests. They carry out a variety of ecological functions and serve as the primary producers in coastal wetlands and oceanic waters. The theme that connects such a wide variety of plants is their ecology, which was also emphasized in the 1981 edition. The goal of this revision is to present taxonomic, physiological, chemical, and ecological aspects of marine plants, their adaptations, and how abiotic and biotic factors interact in their communities. The data are presented in a concise, comparative manner in order to identify similarities and differences between communities such as salt marsh and mangroves or subtidal seaweeds and seagrasses. To accomplish this, the text is organized into five chapters that introduce the marine habitats, consider abiotic and biotic factors, and anthropogenic influences on the communities followed by seven chapters that deal with microalgae, seaweeds, salt marshes, mangroves, seagrasses, and coral reefs. Two appendixes are included; one presents simple field techniques and the other is a summary of seaweed uses

  9. Editörden

    Toprakcı, Erdal

    2017-01-01

    Editörden 2017 yılının ikinci sayısıyla yeniden sizinleyiz. Kaliteye verdiğimiz önem sayesinde, çok kısa sürede adından söz ettiren bir dergiye dönüştük. Kuşkusuz bu süreçte en önemli etken yazarlarımız ve hakemlerimizin titizliğidir.Dergimizin bu sayısında şunlar var: Birinci olarak, YBO’da öğrenim gören öğrencilerin matematiğe yönelik genel tutumların olumlu olduğu, tutum puanlarının sınıf düzeyi, matematik başarısı, matematik öğretmeni sevme düzeyi, matematik önem algısı ve öz-yeterlik baş...

  10. Versioning of printed products

    Tuijn, Chris

    2005-01-01

    During the definition of a printed product in an MIS system, a lot of attention is paid to the production process. The MIS systems typically gather all process-related parameters at such a level of detail that they can determine what the exact cost will be to make a specific product. This information can then be used to make a quote for the customer. Considerably less attention is paid to the content of the products since this does not have an immediate impact on the production costs (assuming that the number of inks or plates is known in advance). The content management is typically carried out either by the prepress systems themselves or by dedicated workflow servers uniting all people that contribute to the manufacturing of a printed product. Special care must be taken when considering versioned products. With versioned products we here mean distinct products that have a number of pages or page layers in common. Typical examples are comic books that have to be printed in different languages. In this case, the color plates can be shared over the different versions and the black plate will be different. Other examples are nation-wide magazines or newspapers that have an area with regional pages or advertising leaflets in different languages or currencies. When considering versioned products, the content will become an important cost factor. First of all, the content management (and associated proofing and approval cycles) becomes much more complex and, therefore, the risk that mistakes will be made increases considerably. Secondly, the real production costs are very much content-dependent because the content will determine whether plates can be shared across different versions or not and how many press runs will be needed. In this paper, we will present a way to manage different versions of a printed product. First, we will introduce a data model for version management. Next, we will show how the content of the different versions can be supplied by the customer

  11. The best printing methods to print satellite images

    G.A. Yousif

    2011-12-01

    In this paper different printing systems were used to print an image of SPOT-4 satellite, caver part of Sharm Elshekh area, Sinai, Egypt, on the same type of paper as much as possible, especially in the photography. This step is followed by measuring the experimental data, and analyzed colors to determine the best printing systems for satellite image printing data. The laser system is the more printing system where produce a wider range of color and highest densities of ink and access much color detail. Followed by the offset system which it recorded the best dot gain. Moreover, the study shows that it can use the advantages of each method according to the satellite image color and quantity to be produced.

  12. Inkjet printed electronics using copper nanoparticle ink

    Kang, Jin Sung; Kim, Hak Sung; Ryu, Jongeun; Thomas Hahn, H.; Jang, Seonhee; Joung, Jae Woo

    2010-01-01

    Inkjet printing of electrode using copper nanoparticle ink is presented. Electrode was printed on a flexible glass epoxy composite substrate using drop on demand piezoelectric dispenser and was sintered at 200 °C of low temperature in N2 gas condition. The printed electrodes were made with various widths and thickness. In order to control the thickness of the printed electrode, number of printing was varied. Resistivity of printed electrode was calculated from the cross-sectional area measure...

  13. Quality Inspection of Printed Texts

    Pedersen, Jesper Ballisager; Nasrollahi, Kamal; Moeslund, Thomas B.

    2016-01-01

    -folded: for costumers of the printing and verification system, the overall grade used to verify if the text is of sufficient quality, while for printer's manufacturer, the detailed character/symbols grades and quality measurements are used for the improvement and optimization of the printing task. The proposed system...

  14. Some Thoughts on Contemporary Graphic Print

    Stefan Skiba

    2016-09-01

    Full Text Available The production requirements of original graphic works of art have changed since 1980. The development of digital printing using lightfast colors now rivals traditional techniques such as wood cut, screen print, lithography, etching etc. Today, with respect to artistic legitimacy, original graphics using traditional printing techniques compete with original graphics produced by digital printing techniques on the art market. What criteria distinguish traditional printing techniques from those of digital printing in the production and acquisition of original graphics? What consequences is the serious artist faced with when deciding to implement digital print production? How does digital print change original graphic acquisition decisions?

  15. From print to web to e-paper: the challenge of designing the e-newspaper

    C. Ihlström; M.Å. kesson; S. Nodqvist

    2004-01-01

    This paper presents future scenarios of use and design of the e-newspaper, i.e. the newspaper on epaper. These scenarios are based on experiences from prototyping e-newspaper interfaces and from a survey with newspaper designers and management. The findings show e.g. that the design from the printed edition and the functionality of the online newspaper were considered preferable attributes for the e-newspaper, and that mobility, interactivity, adjustment for special target groups and personal...

  16. Unlimited mutual solubility in the system LaTiO/sub 3/-YTiO/sub 3/

    Bazuev, G V; Shvejkin, G P [AN SSSR, Sverdlovsk. Inst. Khimii

    1982-08-01

    Formation of unlimited series of solid solutions of substitution Lasub(1-x)Ysub(x)TiOsub(3) (1) with the structure of rhombic perovskite (sp. gr. Pbnm) is established using X-ray diffraction. With the increase of yttrium content in 1 a distortion of perovskite structure is intensified with the decrease of parameters a and c, increase of parameter b and decrease of unit cell volume V take place. Anomalies on the cirves, expressing the dependences b=f(x) and V=f(rsub(Lnsub(3+))sup(3)) in the limits 1 are connected with considerable distortion of oxygen octahedrons TiO/sub 6/ of LnTiO/sub 3/, where Ln-Sm, Gd and Y.

  17. Diffraction-unlimited optical imaging of unstained living cells in liquid by electron beam scanning of luminescent environmental cells.

    Miyazaki, Hideki T; Kasaya, Takeshi; Takemura, Taro; Hanagata, Nobutaka; Yasuda, Takeshi; Miyazaki, Hiroshi

    2013-11-18

    An environmental cell with a 50-nm-thick cathodoluminescent window was attached to a scanning electron microscope, and diffraction-unlimited near-field optical imaging of unstained living human lung epithelial cells in liquid was demonstrated. Electrons with energies as low as 0.8 - 1.2 kV are sufficiently blocked by the window without damaging the specimens, and form a sub-wavelength-sized illumination light source. A super-resolved optical image of the specimen adhered to the opposite window surface was acquired by a photomultiplier tube placed below. The cells after the observation were proved to stay alive. The image was formed by enhanced dipole radiation or energy transfer, and features as small as 62 nm were resolved.

  18. Connectivity editing for quadrilateral meshes

    Peng, Chihan; Zhang, Eugene; Kobayashi, Yoshihiro; Wonka, Peter

    2011-01-01

    We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed highlevel operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques. © 2011 ACM.

  19. Connectivity editing for quadrilateral meshes

    Peng, Chihan

    2011-12-12

    We propose new connectivity editing operations for quadrilateral meshes with the unique ability to explicitly control the location, orientation, type, and number of the irregular vertices (valence not equal to four) in the mesh while preserving sharp edges. We provide theoretical analysis on what editing operations are possible and impossible and introduce three fundamental operations to move and re-orient a pair of irregular vertices. We argue that our editing operations are fundamental, because they only change the quad mesh in the smallest possible region and involve the fewest irregular vertices (i.e., two). The irregular vertex movement operations are supplemented by operations for the splitting, merging, canceling, and aligning of irregular vertices. We explain how the proposed highlevel operations are realized through graph-level editing operations such as quad collapses, edge flips, and edge splits. The utility of these mesh editing operations are demonstrated by improving the connectivity of quad meshes generated from state-of-art quadrangulation techniques. © 2011 ACM.

  20. [Genome editing of industrial microorganism].

    Zhu, Linjiang; Li, Qi

    2015-03-01

    Genome editing is defined as highly-effective and precise modification of cellular genome in a large scale. In recent years, such genome-editing methods have been rapidly developed in the field of industrial strain improvement. The quickly-updating methods thoroughly change the old mode of inefficient genetic modification, which is "one modification, one selection marker, and one target site". Highly-effective modification mode in genome editing have been developed including simultaneous modification of multiplex genes, highly-effective insertion, replacement, and deletion of target genes in the genome scale, cut-paste of a large DNA fragment. These new tools for microbial genome editing will certainly be applied widely, and increase the efficiency of industrial strain improvement, and promote the revolution of traditional fermentation industry and rapid development of novel industrial biotechnology like production of biofuel and biomaterial. The technological principle of these genome-editing methods and their applications were summarized in this review, which can benefit engineering and construction of industrial microorganism.

  1. Bone regeneration by means of a three-dimensional printed scaffold in a rat cranial defect.

    Kwon, Doo Yeon; Park, Ji Hoon; Jang, So Hee; Park, Joon Yeong; Jang, Ju Woong; Min, Byoung Hyun; Kim, Wan-Doo; Lee, Hai Bang; Lee, Junhee; Kim, Moon Suk

    2018-02-01

    Recently, computer-designed three-dimensional (3D) printing techniques have emerged as an active research area with almost unlimited possibilities. In this study, we used a computer-designed 3D scaffold to drive new bone formation in a bone defect. Poly-L-lactide (PLLA) and bioactive β-tricalcium phosphate (TCP) were simply mixed to prepare ink. PLLA + TCP showed good printability from the micronozzle and solidification within few seconds, indicating that it was indeed printable ink for layer-by-layer printing. In the images, TCP on the surface of (and/or inside) PLLA in the printed PLLA + TCP scaffold looked dispersed. MG-63 cells (human osteoblastoma) adhered to and proliferated well on the printed PLLA + TCP scaffold. To assess new bone formation in vivo, the printed PLLA + TCP scaffold was implanted into a full-thickness cranial bone defect in rats. The new bone formation was monitored by microcomputed tomography and histological analysis of the in vivo PLLA + TCP scaffold with or without MG-63 cells. The bone defect was gradually spontaneously replaced with new bone tissues when we used both bioactive TCP and MG-63 cells in the PLLA scaffold. Bone formation driven by the PLLA + TCP30 scaffold with MG-63 cells was significantly greater than that in other experimental groups. Furthermore, the PLLA + TCP scaffold gradually degraded and matched well the extent of the gradual new bone formation on microcomputed tomography. In conclusion, the printed PLLA + TCP scaffold effectively supports new bone formation in a cranial bone defect. Copyright © 2017 John Wiley & Sons, Ltd.

  2. EARLY PRINTED CYRILLIC BOOKS OF THE MAKSYMOVYCH SCIENTIFIC LIBRARY OF THE TARAS SHEVCHENKO NATIONAL UNIVERSITY OF KYIV: THE NEW RESEARCH

    Д. В. Лукін

    2017-10-01

    Full Text Available The article describes the latest research activities on early printed cyrillic books of the Maksymovych Scientific Library, being conducted in 2016-2017. The main attention is paid to the identification of early print editions and the publication of “provenientia”, marginalia, hand-written notes which reveal the origins and history of use of the certain printed documents. The several early Kievan prints are mentioned as well as personalities and locations which are connected with during their long history of use. The latest investigation of two copies of Didactic Gospel, printed in1606 inKrylos, is described. One of them, which was indentified recently, has its origin in TranscarpathianUkraine, while the second copy was donated to the church in Podillya region in 1624, and reappeared much later in private collection of Nikolai Maklakov (1805–1881. A brief description of the scientific project “The interaction of Ukrainian and Belarusian printed book traditions from the 16th till the beginning of the 19th century” is included. The article has its practical purpose in filling the gap in knowledge of certain parts of ukrainian early printed book heritage, which may be valuable to bibliogists and codicologists, dealing with cyrillic prints and manuscripts respectively.

  3. Boneless Pose Editing and Animation

    Bærentzen, Jakob Andreas; Hansen, Kristian Evers; Erleben, Kenny

    2007-01-01

    In this paper, we propose a pose editing and animation method for triangulated surfaces based on a user controlled partitioning of the model into deformable parts and rigid parts which are denoted handles. In our pose editing system, the user can sculpt a set of poses simply by transforming...... the handles for each pose. Using Laplacian editing, the deformable parts are deformed to match the handles. In our animation system the user can constrain one or several handles in order to define a new pose. New poses are interpolated from the examples poses, by solving a small non-linear optimization...... problem in order to obtain the interpolation weights. While the system can be used simply for building poses, it is also an animation system. The user can specify a path for a given constraint and the model is animated correspondingly....

  4. Editörden

    Nadir Arıcan

    2007-04-01

    Full Text Available Değerli Adli Bilimci’ler, Dergimizin ilk baskısının yapıldığı 1996 yılından 2006 yılı sonuna kadar 11 ciltten oluşan dizisini ara vermeden kesintisiz olarak yayınlanma başarısını gösteren Adli Tıp Bülteni Yayın Kurulu adına saygı ile selamlıyoruz. Dergimizin 12. cildinin ilk sayısı, yayın kurulundaki görev değişikliği ile elinize ulaşıyor. “Adli Tıp Bülteni”ni tüm olumsuz koşullara karşın, siz alana emek veren adli bilimcilerin de büyük desteği ile yayın hayatım başarı ile sürdürdü. Bu başarıda başta editörlerimiz sayın Prof. Dr. Serpil Salaçin ve sayın Prof. Dr. Şebnem Korur Fincancı ile yayın kurulunda görev almış meslektaşlarımıza teşekkür ediyor ve desteklerinin artarak devam edeceğini ümit ediyoruz. Adli Tıp Bülteni, ilk editörü sayın Prof. Dr. Serpil Salaçin’in bültenin 1. sayısında belirttiği amaca uygun olarak, her geçen gün daha da güçlenerek yayın hayatını sürdürmektedir. Yayın akışında zaman zaman kesintiler olsa da, amacı doğrultusunda “alanındaki bilgi akışını sağlama ve bilimsel gelişmelerin önemli bir parçası olma özelliğini” Adli Tıp Uzmanları Derneği’nin resmi bilimsel yayın organı kimliği ile devam ettirmektedir. Hedefleri doğrultusunda uluslararası indekslerce taranan bir dergi olma yolunda ilk adımını atan dergimizin bu alandaki çalışmaları sayın Prof. Dr. Şebnem Korur Fincancı tarafından yürütülmektedir. Görevini genç meslektaşına devretmiş olsa da alanımızdaki uluslar arası deneyimi ile Adli Tıp Bülteni’ni çok farklı noktalara taşıyacağı inancındayım. Bu alanda yapacağı katkılardan dolayı sayın hocama biz kez daha teşekkür etmek istiyorum. Bundan böyle Adli Tıp Bülteni’ne yayınlanmak üzere gönderdiğiniz çalışmalarınızın değerlendirmesini daha hızlı yapabilmek ve baskı aşamasına getirmek amacı ile iletişimi elektronik ortamda yapmaya

  5. Tokamaks - Third Edition

    Rogister, A L

    2004-01-01

    John Wesson's well known book, now re-edited for the third time, provides an excellent introduction to fusion oriented plasma physics in tokamaks. The author's task was a very challenging one, for a confined plasma is a complex system characterised by a variety of dimensionless parameters and its properties change qualitatively when certain threshold values are reached in this multi-parameter space. As a consequence, theoretical description is required at different levels, which are complementary: particle orbits, kinetic and fluid descriptions, but also intuitive and empirical approaches. Theory must be carried out on many fronts: equilibrium, instabilities, heating, transport etc. Since the properties of the confined plasma depend on the boundary conditions, the physics of plasmas along open magnetic field lines and plasma surface interaction processes must also be accounted for. Those subjects (and others) are discussed in depth in chapters 2-9. Chapter 1 mostly deals with ignition requirements and the tokamak concept, while chapter 14 provides a list of useful relations: differential operators, collision times, characteristic lengths and frequencies, expressions for the neoclassical resistivity and heat conduction, the bootstrap current etc. The presentation is sufficiently broad and thorough that specialists within tokamak research can either pick useful and up-to-date information or find an authoritative introduction into other areas of the subject. It is also clear and concise so that it should provide an attractive and accurate initiation for those wishing to enter the field and for outsiders who would like to understand the concepts and be informed about the goals and challenges on the horizon. Validation of theoretical models requires adequately resolved experimental data for the various equilibrium profiles (clearly a challenge in the vicinity of transport barriers) and the fluctuations to which instabilities give rise. Chapter 10 is therefore devoted to

  6. Understanding Editing Behaviors in Multilingual Wikipedia.

    Suin Kim

    Full Text Available Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language.

  7. Understanding Editing Behaviors in Multilingual Wikipedia.

    Kim, Suin; Park, Sungjoon; Hale, Scott A; Kim, Sooyoung; Byun, Jeongmin; Oh, Alice H

    2016-01-01

    Multilingualism is common offline, but we have a more limited understanding of the ways multilingualism is displayed online and the roles that multilinguals play in the spread of content between speakers of different languages. We take a computational approach to studying multilingualism using one of the largest user-generated content platforms, Wikipedia. We study multilingualism by collecting and analyzing a large dataset of the content written by multilingual editors of the English, German, and Spanish editions of Wikipedia. This dataset contains over two million paragraphs edited by over 15,000 multilingual users from July 8 to August 9, 2013. We analyze these multilingual editors in terms of their engagement, interests, and language proficiency in their primary and non-primary (secondary) languages and find that the English edition of Wikipedia displays different dynamics from the Spanish and German editions. Users primarily editing the Spanish and German editions make more complex edits than users who edit these editions as a second language. In contrast, users editing the English edition as a second language make edits that are just as complex as the edits by users who primarily edit the English edition. In this way, English serves a special role bringing together content written by multilinguals from many language editions. Nonetheless, language remains a formidable hurdle to the spread of content: we find evidence for a complexity barrier whereby editors are less likely to edit complex content in a second language. In addition, we find that multilinguals are less engaged and show lower levels of language proficiency in their second languages. We also examine the topical interests of multilingual editors and find that there is no significant difference between primary and non-primary editors in each language.

  8. Introducing ZBrush 3rd Edition

    Keller, Eric

    2012-01-01

    Learn ZBrush inside and out with this updated new edition Get totally comfortable sculpting in a digital environment with the latest edition of this bestselling beginner's guide to ZBrush. Fully updated for the newest version of the software, ZBrush 4R3, this book dispels any fears you might have about the difficulty of using ZBrush and soon has you creating realistic, cartoon, and organic models with flair. Learn all the essentials, as you complete fun tutorials on painting, meshes, organic scripting, hard surface sculpting, lighting, rendering, and more. Introduces you to ZBrush, the sculpt

  9. Language Editing at Astronomy & Astrophysics

    Adams, J.

    2011-07-01

    In 2002, the A&A Board of Directors voted that all articles must be written in English and decided to improve the overall quality of the language in the articles with the help of a team of language editors. This article reviews the general advantages of editing the English expression and describes both the aims of this effort and its place in the full publication process. This is followed by the Guide to language editing that has been available on the Journal's website for several years now.

  10. Beginning XML, 5th Edition

    Fawcett, Joe; Quin, Liam R E

    2012-01-01

    A complete update covering the many advances to the XML language The XML language has become the standard for writing documents on the Internet and is constantly improving and evolving. This new edition covers all the many new XML-based technologies that have appeared since the previous edition four years ago, providing you with an up-to-date introductory guide and reference. Packed with real-world code examples, best practices, and in-depth coverage of the most important and relevant topics, this authoritative resource explores both the advantages and disadvantages of XML and addresses the mo

  11. Medical writing, revising and editing

    Pilegaard, Morten

    2006-01-01

    The globalization of science makes medical writing, editing and revision a rapidly growing field of linguistic study and practice. Medical science texts are written according to uniform, general guidelines and medical genres have become highly conventionalized in terms of structure and linguistic...... form. Medical editing often takes the form of peer review and mainly addresses issues of contents and overall validity. Medical revision incorporates the checking of the macrostructure and the microstructure of the text, its language and style and its suitability for the target reader or client...

  12. The best printing methods to print satellite images

    G.A. Yousif; R.Sh. Mohamed

    2011-01-01

    Printing systems operate in general as a system of color its color scale is limited as compared with the system color satellite images. Satellite image is building from very small cell named pixel, which represents the picture element and the unity of color when the image is displayed on the screen, this unit becomes lesser in size and called screen point. This unit posseses different size and shape from the method of printing to another, depending on the output resolution, tools and material...

  13. Detection of latent prints by Raman imaging

    Lewis, Linda Anne [Andersonville, TN; Connatser, Raynella Magdalene [Knoxville, TN; Lewis, Sr., Samuel Arthur

    2011-01-11

    The present invention relates to a method for detecting a print on a surface, the method comprising: (a) contacting the print with a Raman surface-enhancing agent to produce a Raman-enhanced print; and (b) detecting the Raman-enhanced print using a Raman spectroscopic method. The invention is particularly directed to the imaging of latent fingerprints.

  14. Edix: A Software for Editing Algebraic Expressions.

    Bouhineau , Denis; Nicaud , Jean-François; Pavard , X.

    2001-01-01

    International audience; The paper presents a computer software, called Edix, devoted to the edition of algebraic expressions in their usual 2D representation. At present, many systems display fine algebraic expressions, but the edition of such expressions is weak. Systems like Word and FrameMaker place sub-expressions in too many boxes so that many editing actions are not simple, while usual CAS (computer algebra systems) just use a 1D representation for the edition. Furthermore, Edix allows ...

  15. Human Genome Editing and Ethical Considerations.

    Krishan, Kewal; Kanchan, Tanuj; Singh, Bahadur

    2016-04-01

    Editing human germline genes may act as boon in some genetic and other disorders. Recent editing of the genome of the human embryo with the CRISPR/Cas9 editing tool generated a debate amongst top scientists of the world for the ethical considerations regarding its effect on the future generations. It needs to be seen as to what transformation human gene editing brings to humankind in the times to come.

  16. The Korean and Japanese editions of the Korean medical book-Dongyi Baojian%韩国医著《东医宝鉴》的朝日版本

    金南一; 李春梅

    2011-01-01

    1613年以来,朝鲜许浚在朝鲜、中国、日本等地刊行了30余种版本.朝鲜版本有癸丑初刊活字本、己亥岭营木刻本、甲戌岭营开刊本、甲戌岭营改刊本、甲戌完营重刊本等13种;日本版本有日本享保初刊本、日本宽政重刊本2种.%From 1613, DongyiBaojian ( written by Huh Joon) has been published in more than 30editions in Korea, China and Japan. There are 13 kinds of editions in Korea - movable type edition in the Kuichou year; block printed Lingying edition in the Jihai year; the first Lingying edition in Jiaxu year; the edited Lingying edition in the Jiaxu year and the Wanying reprint edition in the Jiaxu year. There are 2 kinds of editions in Japan - the first edition in the Xiangbao period and the reprint edition in the Kuanzheng period.

  17. Keeping the Classics in Print.

    Lerner, Fred

    1993-01-01

    Provides an overview of science fiction titles in print and discusses the value of science fiction as a literary form. Specific titles are included, and the need for formats designed for permanent preservation in libraries is discussed. (EAM)

  18. Reviewing printed and electronic dictionaries

    Nielsen, Sandro

    2009-01-01

    Dictionary reviewing is an integral part of the lexicographic universe. However, lexicographers have called for generally applicable principles embracing both printed and electronic dictionaries. I propose that scholarly reviews contain information that is useful to their intended audiences...

  19. 3D Printed Robotic Hand

    Pizarro, Yaritzmar Rosario; Schuler, Jason M.; Lippitt, Thomas C.

    2013-01-01

    Dexterous robotic hands are changing the way robots and humans interact and use common tools. Unfortunately, the complexity of the joints and actuations drive up the manufacturing cost. Some cutting edge and commercially available rapid prototyping machines now have the ability to print multiple materials and even combine these materials in the same job. A 3D model of a robotic hand was designed using Creo Parametric 2.0. Combining "hard" and "soft" materials, the model was printed on the Object Connex350 3D printer with the purpose of resembling as much as possible the human appearance and mobility of a real hand while needing no assembly. After printing the prototype, strings where installed as actuators to test mobility. Based on printing materials, the manufacturing cost of the hand was $167, significantly lower than other robotic hands without the actuators since they have more complex assembly processes.

  20. 3D printing in dentistry.

    Dawood, A; Marti Marti, B; Sauret-Jackson, V; Darwood, A

    2015-12-01

    3D printing has been hailed as a disruptive technology which will change manufacturing. Used in aerospace, defence, art and design, 3D printing is becoming a subject of great interest in surgery. The technology has a particular resonance with dentistry, and with advances in 3D imaging and modelling technologies such as cone beam computed tomography and intraoral scanning, and with the relatively long history of the use of CAD CAM technologies in dentistry, it will become of increasing importance. Uses of 3D printing include the production of drill guides for dental implants, the production of physical models for prosthodontics, orthodontics and surgery, the manufacture of dental, craniomaxillofacial and orthopaedic implants, and the fabrication of copings and frameworks for implant and dental restorations. This paper reviews the types of 3D printing technologies available and their various applications in dentistry and in maxillofacial surgery.

  1. Disposal of old printed journals

    2018-02-21

    Feb 21, 2018 ... Notice inviting Tender for Disposal of Old Printed Journals & Old News Papers. Indian Academy of ... The competent authority also reserves the right to reject any or all the tenders without assigning any reason thereof. 19.

  2. The Printing Industry Presses on.

    Cutshall, Sandy

    2002-01-01

    The printing and graphic arts industry has been transformed, not replaced, by new technologies. The coming decades hold challenging opportunities for those entering the field of graphic communications and for those educating this new work force. (JOW)

  3. Strategies of Qualitative Inquiry. Third Edition

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    2007-01-01

    "Strategies of Qualitative Inquiry, Third Edition," the second volume in the paperback version of "The SAGE Handbook of Qualitative Research, 3rd Edition," consists of Part III of the handbook ("Strategies of Inquiry"). "Strategies of Qualitative Inquiry, Third Edition" presents the major tactics--historically, the research methods--that…

  4. Promoting School Success. Third Edition

    Lovitt, Thomas C.

    2007-01-01

    Like its two predecessors, "Preventing School Dropouts" [C1991] and "Preventing School Failure" [C2000], this third edition is a book about teaching. Although primarily written for teachers, tutors and parents may also find this book helpful. It is a collection of carefully selected teaching techniques aimed at helping young adults learn important…

  5. Veterinary Microbiology, 3rd Edition

    Veterinary Microbiology, Third Edition is organized into four sections and begins with an updated and expanded introductory section on infectious disease pathogenesis, diagnosis and clinical management. The second section covers bacterial and fungal pathogens, and the third section describes viral d...

  6. How Adults Learn. Revised Edition.

    Kidd, J. R.

    The book's emphasis is on learning during the years of adulthood and examines present-day practice of adult education for practitioners. This revised edition brings up to date advances in such areas of learning as controversial theory; the effects of environment; sensory processes; intellectual capacities; motivation and attitude; transactional…

  7. Money and Schools. Fifth Edition

    Thompson, David C.; Crampton, Faith E.; Wood, R. Craig

    2012-01-01

    In the new edition of this essential, all-inclusive text, the authors provide more important research for future principals and others enrolled in graduate-level school finance courses. Written in a style that is highly readable, the book offers strong connections to real-world experiences. Readers get both a broad overview of funding concepts and…

  8. Semiotic Analysis Of Mcdonald's Printed Advertisement

    URAIDA, SITI

    2014-01-01

    Keywords: Semiotic, printed advertisement, sign, icon, symbol, index, connotation, myth Printed advertisement has a promotional function as medium to advertise aproduct. It implicitly persuades people to create demand of product which is being advertised. In this study, the writer uses printed advertisement of McDonald's fast food company as the object. The printed advertisement was analyzed by usingSemiotics study. There are seven printed advertisements that were analyzes in this study. All ...

  9. Natural fibre composites for 3D Printing

    Pandey, Kapil

    2015-01-01

    3D printing has been common option for prototyping. Not all the materials are suitable for 3D printing. Various studies have been done and still many are ongoing regarding the suitability of the materials for 3D printing. This thesis work discloses the possibility of 3D printing of certain polymer composite materials. The main objective of this thesis work was to study the possibility for 3D printing the polymer composite material composed of natural fibre composite and various different ...

  10. 3D-Printed Millimeter Wave Structures

    2016-03-14

    demonstrates the resolution of the printer with a 10 micron nozzle. Figure 2: Measured loss tangent of SEBS and SBS samples. 3D - Printed Millimeter... 3D printing of styrene-butadiene-styrene (SBS) and styrene ethylene/butylene-styrene (SEBS) is used to demonstrate the feasibility of 3D - printed ...Additionally, a dielectric lens is printed which improves the antenna gain of an open-ended WR-28 waveguide from 7 to 8.5 dBi. Keywords: 3D printing

  11. Inkjet and screen printing for electronic applications

    Medina Rodríguez, Beatriz

    2016-01-01

    Printed electronics (PE) is a set of printing methods used to create electrical devices on various substrates. Printing typically uses common printing equipment suitable for defining patterns on material, such as screen printing, flexography, gravure, offset lithography, and inkjet. Electrically functional, electronic or optical inks are deposited on the substrate, creating active or passive devices. PE offers a great advantage when compared to traditional processes or microelectronics du...

  12. Printing nanotube/nanowire for flexible microsystems

    Tortorich, Ryan P.; Choi, Jin-Woo

    2014-04-01

    Printing has become an emerging manufacturing technology for mechanics, electronics, and consumer products. Additionally, both nanotubes and nanowires have recently been used as materials for sensors and electrodes due to their unique electrical and mechanical properties. Printed electrodes and conductive traces particularly offer versatility of fabricating low-cost, disposable, and flexible electrical devices and microsystems. While various printing methods such as screen printing have been conventional methods for printing conductive traces and electrodes, inkjet printing has recently attracted great attention due to its unique advantages including no template requirement, rapid printing at low cost, on-demand printing capability, and precise control of the printed material. Computer generated conductive traces or electrode patterns can simply be printed on a thin film substrate with proper conductive ink consisting of nanotubes or nanowires. However, in order to develop nanotube or nanowire ink, there are a few challenges that need to be addressed. The most difficult obstacle to overcome is that of nanotube/nanowire dispersion within a solution. Other challenges include adjusting surface tension and controlling viscosity of the ink as well as treating the surface of the printing substrate. In an attempt to pave the way for nanomaterial inkjet printing, we present a method for preparing carbon nanotube ink as well as its printing technique. A fully printed electrochemical sensor using inkjet-printed carbon nanotube electrodes is also demonstrated as an example of the possibilities for this technology.

  13. Combining Induced Pluripotent Stem Cells and Genome Editing Technologies for Clinical Applications.

    Chang, Chia-Yu; Ting, Hsiao-Chien; Su, Hong-Lin; Jeng, Jing-Ren

    2018-01-01

    In this review, we introduce current developments in induced pluripotent stem cells (iPSCs), site-specific nuclease (SSN)-mediated genome editing tools, and the combined application of these two novel technologies in biomedical research and therapeutic trials. The sustainable pluripotent property of iPSCs in vitro not only provides unlimited cell sources for basic research but also benefits precision medicines for human diseases. In addition, rapidly evolving SSN tools efficiently tailor genetic manipulations for exploring gene functions and can be utilized to correct genetic defects of congenital diseases in the near future. Combining iPSC and SSN technologies will create new reliable human disease models with isogenic backgrounds in vitro and provide new solutions for cell replacement and precise therapies.

  14. What if Member States Subjected Non-Resident Taxpayers to Unlimited Income Taxation whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    M.F. de Wilde (Maarten)

    2011-01-01

    textabstractIn this article, the author seeks to illustrate, through examples dealing with cross-border business losses, what the result would be if Member States were to subject non-resident taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax

  15. Currency Exchange Results - What If Member States Subjected Taxpayers to Unlimited Income Taxation Whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    M.F. de Wilde (Maarten)

    2011-01-01

    textabstractThe author, in this article, examines, through examples, the effects of Member States subjecting taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax exemption with regard to how such an approach would affect the cross-border taxation of

  16. Intra-Firm Transactions: What if Member States Subjected Taxpayers to Unlimited Income Taxation whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    M.F. de Wilde (Maarten)

    2011-01-01

    textabstractIn this article, the author examines, through examples, the effects of Member States subjecting taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax exemption from the perspective of how such an approach would affect the cross-border

  17. What if Member States Subjected Non-Resident Taxpayers to Unlimited Income Taxation whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    Wilde, Maarten

    2011-01-01

    textabstractIn this article, the author seeks to illustrate, through examples dealing with cross-border business losses, what the result would be if Member States were to subject non-resident taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax exemption method.

  18. The role of a northern town in a massively multiplayer online roleplaying game:Bruma in The Elder Scrolls Online: Tamriel Unlimited

    Pelkonen, M. (Minna)

    2016-01-01

    Abstract This Master’s Thesis explores the gameplay and imagery offered to players in a town called Bruma in the PC version of the Massively Multiplayer Online Roleplaying Game (MMORPG) The Elder Scrolls Online: Tamriel Unlimited by Zenimax Online Studios. The game was originally released in 2014 under the name The Elder Scrolls Online. The thesis main...

  19. Currency Exchange Results - What If Member States Subjected Taxpayers to Unlimited Income Taxation Whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    Wilde, Maarten

    2011-01-01

    textabstractThe author, in this article, examines, through examples, the effects of Member States subjecting taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax exemption with regard to how such an approach would affect the cross-border taxation of currency exchange results.

  20. Intra-Firm Transactions: What if Member States Subjected Taxpayers to Unlimited Income Taxation whilst Granting Double Tax Relief under a Netherlands-Style Tax Exemption?

    Wilde, Maarten

    2011-01-01

    textabstractIn this article, the author examines, through examples, the effects of Member States subjecting taxpayers to unlimited income taxation whilst granting double tax relief under a Netherlands-style tax exemption from the perspective of how such an approach would affect the cross-border taxation of intra-firm transactions.

  1. Demonstration Testing of a Thermal Desorption Unit to Receive and Treat Waste with Unlimited Concentration of PCBs - 13437

    Orton, Timothy L. [EnergySolutions, 423 West 300 South, Salt Lake City, UT 84101 (United States); Palmer, Carl R. [TD.X Associates LP, 148 South Dowlen Road, PMB 700, Beaumont, TX 77707 (United States)

    2013-07-01

    For the last nine years, EnergySolutions and TD*X Associates LP have teamed up to provide the most comprehensive organic removal treatment process in the radioactive waste industry. The high performance thermal desorption unit (HP-TDU) located at the EnergySolutions Clive facility in Utah has successfully processed over 1,850 tons of organically contaminated radioactive mixed waste. Products from the HP-TDU system include a radioactively contaminated dry solid material that can be disposed in the on-site landfill and an organic condensate with high thermal energy content that is generally below background radiation and capable of free-release to a non-radioactive incinerator. Over the years, Permits and approvals have been obtained through the state of Utah, United States Environmental Protection Agency (USEPA) Region 8, and USEPA headquarters that enable the treatment of several waste categories including volatile and semi-volatile organic compounds, combustion-coded (CMBST) compounds, volatile metals, and polychlorinated biphenyls (PCBs). The unit has recently successfully completed Demonstration Testing for PCB concentrations up to 660,000 ppm (parts per million). Solid processed material from this Demonstration Testing was less than two ppm PCBs in three separate treatment runs; reprocessing or additional treatment was not needed to meet this limit. Through post-demonstration permitting, the system is unlimited in scope as approval has been given to receive and solidify up to pure PCBs down to this processing limit concentration to complete treatment of mixed waste. (authors)

  2. Unlimited access to low-energy diet causes acute malnutrition in dams and alters biometric and biochemical parameters in offspring.

    do Nascimento, E; de Santana Muniz, G; das Graças de Santana Muniz, M; de Souza Alexandre, L; da Rocha, L S; Leandro, C G; de Castro, R M; Bolaños-Jimenez, F

    2014-02-01

    Here we analyze the outcomes of unlimited access to a low-energy (LE) diet in dams and their offspring. At 3 weeks' gestation, pregnant Wistar rats were divided into two groups: (1) the control group received a normoenergetic diet; and (2) the experimental group received the LE diet. In dams, lactation outcomes, food intake, body weight, plasma IGF-1, prealbumin, transferrin and retinol-binding protein levels were evaluated; in offspring, biometric and biochemical parameters and food intake were evaluated. No differences were observed during pregnancy. However, after lactation, dams that received the LE diet demonstrated significant reductions in body weight (P<0.05), plasma IGF-1 (P=0.01), prealbumin and visceral fat (P<0.001). Pups born to dams that received the LE diet demonstrated reduced body length and weight at weaning (P<0.001) and were lighter than the control animals at the end of the experimental period. Pups also demonstrated reduced plasma, low-density lipoprotein (P=0.04), triglycerides (P=0.002) and glucose levels (P<0.05), and differences were noted in visceral fat. These results indicate that feeding dams with LE diet during the reproductive period induces acute malnutrition and impairs the growth and development of offspring, as well as certain metabolic parameters.

  3. Vertical + horizontal unlimited

    Hansen, Kenneth

    2006-01-01

    The movie theatre has largely been unchanged since its very start. Still people are sitting in front of a large white screen looking at images projected from a traditional film projector. However, as movie and movie making becomes increasingly digitized and a vast array of distributed media...... is available, new forms of cinematic experience are emerging. This presentation aims to inspire to new ideas by giving a brief introduction to recent international research in new cinematic forms taking a few examples from the MIT Media Lab in Boston - from interactive cinema to media fabrics - and The Future...... is the computer sports performance "Otopia" developed at Performance-design at The Roskilde University just north of Copenhagen for the annual Roskilde Festival. The presentation ends with an outline of possible projects in the future discussing the promises of the merger of genres as computer games and film...

  4. Writing, Editing and Publishing an Article in a Scientific Journal

    Man Bahadur Khattri

    2010-02-01

    Full Text Available The purpose of this article is to discuss some important aspects involved while writing an article to publish in a scientific journal. This is a review article. I argue that writing an article is technical as well as creative art of an author which facilitates acceptance of article for publication in a scientific journal. Academicians are obliged to conduct research and publish articles to demonstrate their job efficiency. To publish an article in a scientific journal is the first necessary condition to meet standard norms i.e. journal's guideline for authors and the next is to follow the editing processes of the journal. Writing an article for printed version is becoming an old fashion. Therefore, authors need to learn how to submit a scholarly written article online and follow review processes. Writing and publishing of a scientific article is not only important for individuals and specific scientific community, it is also important to the wider society which helps to enhance stock of knowledge, and sharing and learning culture. Key words: Online publication; author aid; open access; copy editing; peer review DOI: 10.3126/dsaj.v3i0.2787 Dhaulagiri Journal of Sociology and Anthropology Vol.3 2009 185-196

  5. Statistical Physics Approaches to RNA Editing

    Bundschuh, Ralf

    2012-02-01

    The central dogma of molecular Biology states that DNA is transcribed base by base into RNA which is in turn translated into proteins. However, some organisms edit their RNA before translation by inserting, deleting, or substituting individual or short stretches of bases. In many instances the mechanisms by which an organism recognizes the positions at which to edit or by which it performs the actual editing are unknown. One model system that stands out by its very high rate of on average one out of 25 bases being edited are the Myxomycetes, a class of slime molds. In this talk we will show how the computational methods and concepts from statistical Physics can be used to analyze DNA and protein sequence data to predict editing sites in these slime molds and to guide experiments that identified previously unknown types of editing as well as the complete set of editing events in the slime mold Physarum polycephalum.

  6. 3D Printed Bionic Nanodevices.

    Kong, Yong Lin; Gupta, Maneesh K; Johnson, Blake N; McAlpine, Michael C

    2016-06-01

    The ability to three-dimensionally interweave biological and functional materials could enable the creation of bionic devices possessing unique and compelling geometries, properties, and functionalities. Indeed, interfacing high performance active devices with biology could impact a variety of fields, including regenerative bioelectronic medicines, smart prosthetics, medical robotics, and human-machine interfaces. Biology, from the molecular scale of DNA and proteins, to the macroscopic scale of tissues and organs, is three-dimensional, often soft and stretchable, and temperature sensitive. This renders most biological platforms incompatible with the fabrication and materials processing methods that have been developed and optimized for functional electronics, which are typically planar, rigid and brittle. A number of strategies have been developed to overcome these dichotomies. One particularly novel approach is the use of extrusion-based multi-material 3D printing, which is an additive manufacturing technology that offers a freeform fabrication strategy. This approach addresses the dichotomies presented above by (1) using 3D printing and imaging for customized, hierarchical, and interwoven device architectures; (2) employing nanotechnology as an enabling route for introducing high performance materials, with the potential for exhibiting properties not found in the bulk; and (3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. Further, 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This blending of 3D printing, novel nanomaterial properties, and 'living' platforms may enable next-generation bionic systems. In this review, we highlight this synergistic integration of the unique properties of nanomaterials with the

  7. 3D Printed Bionic Nanodevices

    Kong, Yong Lin; Gupta, Maneesh K.; Johnson, Blake N.; McAlpine, Michael C.

    2016-01-01

    Summary The ability to three-dimensionally interweave biological and functional materials could enable the creation of bionic devices possessing unique and compelling geometries, properties, and functionalities. Indeed, interfacing high performance active devices with biology could impact a variety of fields, including regenerative bioelectronic medicines, smart prosthetics, medical robotics, and human-machine interfaces. Biology, from the molecular scale of DNA and proteins, to the macroscopic scale of tissues and organs, is three-dimensional, often soft and stretchable, and temperature sensitive. This renders most biological platforms incompatible with the fabrication and materials processing methods that have been developed and optimized for functional electronics, which are typically planar, rigid and brittle. A number of strategies have been developed to overcome these dichotomies. One particularly novel approach is the use of extrusion-based multi-material 3D printing, which is an additive manufacturing technology that offers a freeform fabrication strategy. This approach addresses the dichotomies presented above by (1) using 3D printing and imaging for customized, hierarchical, and interwoven device architectures; (2) employing nanotechnology as an enabling route for introducing high performance materials, with the potential for exhibiting properties not found in the bulk; and (3) 3D printing a range of soft and nanoscale materials to enable the integration of a diverse palette of high quality functional nanomaterials with biology. Further, 3D printing is a multi-scale platform, allowing for the incorporation of functional nanoscale inks, the printing of microscale features, and ultimately the creation of macroscale devices. This blending of 3D printing, novel nanomaterial properties, and ‘living’ platforms may enable next-generation bionic systems. In this review, we highlight this synergistic integration of the unique properties of nanomaterials with

  8. Mikhail Lomonosov’s “Short Manual in Rhetoric”: The History of the First Edition from 1748

    Andrei A. Kostin

    2017-12-01

    Full Text Available The article studies the first editions of Mikhail Lomonosov’s “Kratkoe rukovodstvo k krasnorechiiu (A Short Manual in Rhetoric,” issued by the Academy of Sciences in 1748 and 1765. The textual variations help us demonstrate that the common view on the history of these texts as directly descending from the only extant set of proof-reads is false. With textual and codicological analysis (including the presentation of three unique copies of the first edition, and using the records of the Academy Chancellery and Typography, we argue that the creation of the unique varying copies of the first edition were caused not only by the fire in the Academy building (December 5, 1747, but also by the lack of paper in the Typography’s stock and the fact, that the most part of the book had not yet been written by the time it started to print. For more than a year Lomonosov provided the typography with only small portions of the text, and thus the reprinting the portion of the print run damaged by the fire coincided with the creation of the last chapters. This made it possible for Lomonosov to radically rewrite the first paragraphs of an early chapter “On fictions,” turning it into a theoretical text, legitimizing the fiction genres, which became the crucial part of the Academy print in 1747/48 (Volchkov’s translation of the Aesop’s Fables; the translations of the Fenelons’ Telemaque and Barclay’s Argenis; Sumarokov’s tragedies. The article concludes with a verified stemma of the print sources of the “Kratkoe rukovodstvo,” issued during Lomonosov’s lifetime; and the Moscow edition (1759–1765 is argued to present the latest authorized text.

  9. Print Finishing: From Manual to Automated Print Finishing

    Gareth Ward

    2004-12-01

    Full Text Available Meeting the demand for faster turnrounds and shorter print runs goes beyond making the printing press easier to set up and change. There is little point in producing plates and then sheets from a press if the post press area does not change to keep abreast of developments in prepress and the print room. The greatest impact is going to come from JDF, the end to end production data format which is finding wide spread acceptance in print areas. To date finishing equipment manufacturers are not as well represented within the CIP4 organisation as prepress and press vendors, but the major manufacturers are members. All are working to the goal of complete connectivity.The idea of JDF is that if the format of a print product like a magazine is known during the creation phases, the information can be used to preset machinery that is going to be used to produce it, so avoiding input errors and saving manufacturing time.A second aspect to JDF is that information about performance and progress is gathered and can be retrieved from a central point or made available to a customer. Production scheduling and costing becomes more accurate and customer relationships are deepened. However JDF to its fullest extent is not yet in use in connecting the finishing area to the rest of the printing plant. Around the world different companies are testing the idea of JDF to connect saddle stitchers, guillotines and binders with frantic work underway to be able to show results soon.

  10. 3D Printing: Print the future of ophthalmology.

    Huang, Wenbin; Zhang, Xiulan

    2014-08-26

    The three-dimensional (3D) printer is a new technology that creates physical objects from digital files. Recent technological advances in 3D printing have resulted in increased use of this technology in the medical field, where it is beginning to revolutionize medical and surgical possibilities. It is already providing medicine with powerful tools that facilitate education, surgical planning, and organ transplantation research. A good understanding of this technology will be beneficial to ophthalmologists. The potential applications of 3D printing in ophthalmology, both current and future, are explored in this article. Copyright 2014 The Association for Research in Vision and Ophthalmology, Inc.

  11. Balkan Print Forum – Dynamic Balkan Print Media Community

    Rossitza Velkova

    2011-11-01

    Full Text Available Founded in October 2006, the Balkan Print Forum is gradually becoming an important regional institution. Its main targets are to share experiences and know-how,to initiate and intensify contacts and to support joint projects in the Balkan region.Since drupa 2008 there are 11 member countries of the Balkan Print Forum:Albania, Bosnia and Herzegovina, Bulgaria, Croatia, Former Yugoslav Republic of Macedonia, Greece, Hungary, Romania, Serbia, Slovenia and Turkey. Partners of BPF are some companies and universities from Russia and Ukraine.

  12. Interactive editing program using display

    Lang, I.; Ehsenski, J.; Namsraj, Yu.; Fefilov, B.V.

    1976-01-01

    A general description is given as well as principal functions are considered of 'DOSE' interactive editor program with a display involved. The program has been elaborated for TRA/1-1001 computer. This program enables one to edit and correct texts in algorithmical languages on a raster display screen as well as to provide perforated tapes for their further usage. 'DOSE' program is regarded as a basic program system for a set of TRA/1 and MINSK-32 computers

  13. Particle Physics, 2nd Edition

    Martin, B. R.; Shaw, G.

    1998-01-01

    Particle Physics, Second Edition is a concise and lucid account of the fundamental constituents of matter. The standard model of particle physics is developed carefully and systematically, without heavy mathematical formalism, to make this stimulating subject accessible to undergraduate students. Throughout, the emphasis is on the interpretation of experimental data in terms of the basic properties of quarks and leptons, and extensive use is made of symmetry principles and Feynman diagrams, which are introduced early in the book. The Second Edition brings the book fully up to date, including the discovery of the top quark and the search for the Higgs boson. A final short chapter is devoted to the continuing search for new physics beyond the standard model. Particle Physics, Second Edition features: * A carefully structured and written text to help students understand this exciting and demanding subject. * Many worked examples and problems to aid student learning. Hints for solving the problems are given in an Appendix. * Optional "starred" sections and appendices, containing more specialised and advanced material for the more ambitious reader.

  14. RNA Editing in Plant Mitochondria

    Hiesel, Rudolf; Wissinger, Bernd; Schuster, Wolfgang; Brennicke, Axel

    1989-12-01

    Comparative sequence analysis of genomic and complementary DNA clones from several mitochondrial genes in the higher plant Oenothera revealed nucleotide sequence divergences between the genomic and the messenger RNA-derived sequences. These sequence alterations could be most easily explained by specific post-transcriptional nucleotide modifications. Most of the nucleotide exchanges in coding regions lead to altered codons in the mRNA that specify amino acids better conserved in evolution than those encoded by the genomic DNA. Several instances show that the genomic arginine codon CGG is edited in the mRNA to the tryptophan codon TGG in amino acid positions that are highly conserved as tryptophan in the homologous proteins of other species. This editing suggests that the standard genetic code is used in plant mitochondria and resolves the frequent coincidence of CGG codons and tryptophan in different plant species. The apparently frequent and non-species-specific equivalency of CGG and TGG codons in particular suggests that RNA editing is a common feature of all higher plant mitochondria.

  15. Edition des Corpus areopagiticum slavicum

    Dieter Fahl

    2005-12-01

    Full Text Available An Edition of the Corpus areopagiticum slavicum In the fourteenth century, the monk Isaiah of the holy Mount Athos translated the writings of pseudo-Dionysius the Areopagite (c. end of the 5th century, core texts for Eastern and Western European theological and philosophical thought, from Greek into Church Slavonic. This first Slavic translation of Dionysius’ oeuvre (“De Coelesti Hierarchia,” “De Ecclesiastica Hierarchia,” “De Divinis Nominibus,” “De Mystica Theologia,” the epistles and scholia, which played a significant role in the development of Slavic culture, Orthodox Slavic socio-political theory and praxis, is still central to the study of Slavia Orthodoxa. A working group of German and Russian scholars has completed an edition of the translator’s Church Slavonic autograph with an en face reconstruction of the Greek text used by the translator and philological commentary. A Church Slavonic-Greek and Greek-Church Slavonic dictionary of this edition, currently in preparation, plans to make the terminology used in this influential translation accessible to interdisciplinary researchers. For the first time, the Church Slavonic lexica of this corpus, a substantial part of which was coined by the translator, will be registered in an index of words and forms.

  16. AR42J-B-13 cell: An expandable progenitor to generate an unlimited supply of functional hepatocytes

    Wallace, Karen; Fairhall, Emma A.; Charlton, Keith A.; Wright, Matthew C.

    2010-01-01

    Hepatocytes are the preparation of choice for Toxicological research in vitro. However, despite the fact that hepatocytes proliferate in vivo during liver regeneration, they are resistant to proliferation in vitro, do not tolerate sub-culture and tend to enter a de-differentiation program that results in a loss of hepatic function. These limitations have resulted in the search for expandable rodent and human cells capable of being directed to differentiate into functional hepatocytes. Research with stem cells suggests that it may be possible to provide the research community with hepatocytes in vitro although to date, significant challenges remain, notably generating a sufficiently pure population of hepatocytes with a quantitative functionality comparable with hepatocytes. This paper reviews work with the AR42J-B-13 (B-13) cell line. The B-13 cell was cloned from the rodent AR42J pancreatic cell line, express genes associated with pancreatic acinar cells and readily proliferates in simple culture media. When exposed to glucocorticoid, 75-85% of the cells trans-differentiate into hepatocyte-like (B-13/H) cells functioning at a level quantitatively similar to freshly isolated rat hepatocytes (with the remaining cells retaining the B-13 phenotype). Trans-differentiation of pancreatic acinar cells also appears to occur in vivo in rats treated with glucocorticoid; in mice with elevated circulating glucocorticoid and in humans treated for long periods with glucocorticoid. The B-13 response to glucocorticoid therefore appears to be related to a real pathophysiological response of a pancreatic cell to glucocorticoid. An understanding of how this process occurs and if it can be generated or engineered in human cells would result in a cell line with the ability to generate an unlimited supply of functional human hepatocytes in a cost effective manner.

  17. Nanoparticle composites for printed electronics

    Männl, U; Van den Berg, C; Magunje, B; Härting, M; Britton, D T; Jones, S; Van Staden, M J; Scriba, M R

    2014-01-01

    Printed Electronics is a rapidly developing sector in the electronics industry, in which nanostructured materials are playing an increasingly important role. In particular, inks containing dispersions of semiconducting nanoparticles, can form nanocomposite materials with unique electronic properties when cured. In this study we have extended on our previous studies of functional nanoparticle electronic inks, with the development of a solvent-based silicon ink for printed electronics which is compatible with existing silver inks, and with the investigation of other metal nanoparticle based inks. It is shown that both solvent-based and water-based inks can be used for both silver conductors and semiconducting silicon, and that qualitatively there is no difference in the electronic properties of the materials printed with a soluble polymer binder to when an acrylic binder is used. (paper)

  18. All-printed paper memory

    He, Jr-Hau

    2016-08-11

    All-printed paper-based substrate memory devices are described. In an embodiment, a paper-based memory device is prepared by coating one or more areas of a paper substrate with a conductor material such as a carbon paste, to form a first electrode of a memory, depositing a layer of insulator material, such as titanium dioxide, over one or more areas of the conductor material, and depositing a layer of metal over one or more areas of the insulator material to form a second electrode of the memory. In an embodiment, the device can further include diodes printed between the insulator material and the second electrode, and the first electrode and the second electrodes can be formed as a crossbar structure to provide a WORM memory. The various layers and the diodes can be printed onto the paper substrate by, for example, an ink jet printer.

  19. 3D printing for orthopedic applications: from high resolution cone beam CT images to life size physical models

    Jackson, Amiee; Ray, Lawrence A.; Dangi, Shusil; Ben-Zikri, Yehuda K.; Linte, Cristian A.

    2017-03-01

    With increasing resolution in image acquisition, the project explores capabilities of printing toward faithfully reflecting detail and features depicted in medical images. To improve safety and efficiency of orthopedic surgery and spatial conceptualization in training and education, this project focused on generating virtual models of orthopedic anatomy from clinical quality computed tomography (CT) image datasets and manufacturing life-size physical models of the anatomy using 3D printing tools. Beginning with raw micro CT data, several image segmentation techniques including thresholding, edge recognition, and region-growing algorithms available in packages such as ITK-SNAP, MITK, or Mimics, were utilized to separate bone from surrounding soft tissue. After converting the resulting data to a standard 3D printing format, stereolithography (STL), the STL file was edited using Meshlab, Netfabb, and Meshmixer. The editing process was necessary to ensure a fully connected surface (no loose elements), positive volume with manifold geometry (geometry possible in the 3D physical world), and a single, closed shell. The resulting surface was then imported into a "slicing" software to scale and orient for printing on a Flashforge Creator Pro. In printing, relationships between orientation, print bed volume, model quality, material use and cost, and print time were considered. We generated anatomical models of the hand, elbow, knee, ankle, and foot from both low-dose high-resolution cone-beam CT images acquired using the soon to be released scanner developed by Carestream, as well as scaled models of the skeletal anatomy of the arm and leg, together with life-size models of the hand and foot.

  20. 3D inkjet printed radio frequency inductors and capacitors

    Vaseem, Mohammad; McKerricher, Garret; Shamim, Atif

    2016-01-01

    fully printed RF components, the substrate must also be printed. 3D printing of polymers can be an ideal mechanism for printing substrates, however typically such materials cannot handle high sintering temperatures (>150 0C) required for nanoparticles

  1. Printing of the year book, carton boxes and printed envelopes

    2018-01-18

    Jan 18, 2018 ... Technology, Government of India needs the following book to be printed ... of the documents are not enclosed, the quotation will not be considered. ... The EMD of selected bidder will be kept as security deposit till ... via E-Mail.

  2. Cultural stereotypes in Nigerian print media advertisements ...

    Cultural stereotypes in Nigerian print media advertisements. ... Abstract. This study set out to examine the extent to which cultural stereotype roles are depicted in print advertisements in Nigeria. It specifically ... AJOL African Journals Online.

  3. Intrinsic defects in 3D printed materials

    Bolton, Christopher; Dagastine, Raymond

    2015-01-01

    We discuss the impact of bulk structural defects on the coherence, phase and polarisation of light passing through transparent 3D printed materials fabricated using a variety of commercial print technologies.

  4. Connectivity editing for quad-dominant meshes

    Peng, Chihan

    2013-08-01

    We propose a connectivity editing framework for quad-dominant meshes. In our framework, the user can edit the mesh connectivity to control the location, type, and number of irregular vertices (with more or fewer than four neighbors) and irregular faces (non-quads). We provide a theoretical analysis of the problem, discuss what edits are possible and impossible, and describe how to implement an editing framework that realizes all possible editing operations. In the results, we show example edits and illustrate the advantages and disadvantages of different strategies for quad-dominant mesh design. © 2013 The Author(s) Computer Graphics Forum © 2013 The Eurographics Association and John Wiley & Sons Ltd.

  5. 3D Printing Electrically Small Spherical Antennas

    Kim, Oleksiy S.

    2013-01-01

    3D printing is applied for rapid prototyping of an electrically small spherical wire antenna. The model is first printed in plastic and subsequently covered with several layers of conductive paint. Measured results are in good agreement with simulations.......3D printing is applied for rapid prototyping of an electrically small spherical wire antenna. The model is first printed in plastic and subsequently covered with several layers of conductive paint. Measured results are in good agreement with simulations....

  6. Strategies in the digital printing value system

    Mejtoft, Thomas

    2006-01-01

    The research objective of this thesis is to identify corporate strategies and strategic decisions in the digital printing business and to analyze how these have evolved due to the introduction of digital printing. This thesis comprises three separate studies, all based on qualitative case methodology. The first study is focused on digital printing houses and how their business strategies have changed due to their investment in digital printing production equipment. The second study concentrat...

  7. Experiments on Printed Intelligence and Its Applications

    Barbonelova, Angelina

    2015-01-01

    Printed intelligence technology refers to products and systems that are produced using traditional printing methods and that are able to communicate or react with the user, environment or other products and systems. The technology provides the foundations of innovative products such as printed OLEDs (organic light emitting device), electroluminescent displays, organic photovoltaics, thin film batteries and disposable sensors. This study presents research on different printing techniques i...

  8. Government Contract Law (9th Edition)

    1987-04-01

    This Ninth Edition, like its predecessors, will serve as the textbook for the Government Contract Law taught at the School of Systems and Logistics...drawn from Government Contract Law -Cases, 1987 edition, for a rounded approach to the subject. This edition of the text includes coverage of the...Government Contract Law complements the Federal Acquisition Regulation and provides a preventive law treatment for contracting personnel. While it may

  9. Operational Transformation In Co-Operative Editing

    Mandeep Kaur

    2015-08-01

    Full Text Available Cooperative Editing Systems in real-time allows a virtual team to view and edit a shared document at the same time. The document shared must be synchronized in order to ensure consistency for all the participants. This paper describes the Operational Transformation the evolution of its techniques its various applications major issues and achievements. In addition this paper will present working of a platform where two users can edit a code programming file at the same time.

  10. Solar heating and cooling of residential buildings: design of systems, 1980 edition

    None

    1980-09-01

    This manual was prepared primarily for use in conducting a practical training course on the design of solar heating and cooling systems for residential and small office buildings, but may also be useful as a general reference text. The content level is appropriate for persons with different and varied backgrounds, although it is assumed that readers possess a basic understanding of heating, ventilating, and air-conditioning systems of conventional (non-solar) types. This edition is a revision of the manual with the same title, first printed and distributed by the US Government Printing Office in October 1977. The manual has been reorganized, new material has been added, and outdated information has been deleted. Only active solar systems are described. Liquid and air-heating solar systems for combined space and service water heating or service water heating are included. Furthermore, only systems with proven experience are discussed to any extent.

  11. Calibrate the aerial surveying instrument by the limited surface source and the single point source that replace the unlimited surface source

    Lu Cun Heng

    1999-01-01

    It is described that the calculating formula and surveying result is found on the basis of the stacking principle of gamma ray and the feature of hexagonal surface source when the limited surface source replaces the unlimited surface source to calibrate the aerial survey instrument on the ground, and that it is found in the light of the exchanged principle of the gamma ray when the single point source replaces the unlimited surface source to calibrate aerial surveying instrument in the air. Meanwhile through the theoretical analysis, the receiving rate of the crystal bottom and side surfaces is calculated when aerial surveying instrument receives gamma ray. The mathematical expression of the gamma ray decaying following height according to the Jinge function regularity is got. According to this regularity, the absorbing coefficient that air absorbs the gamma ray and the detective efficiency coefficient of the crystal is calculated based on the ground and air measuring value of the bottom surface receiving cou...

  12. Printing Values In Interactive ROOT

    Perovic, Boris

    2015-01-01

    This project report summarizes the work I have been performing during the past twelve weeks as a Summer Student intern working on ROOT project in the SFT group, PH department, under the supervision of Axel Naumann and Danilo Piparo. One of the widely requested features for ROOT was improved interactive shell experience as well as improved printing of object values. Solving this issue was the goal of this project. Primarily, we have enabled printing of the collections. Secondly, we have unified the printing interface, making it much more robust and extendible. Thirdly, we have implemented printing of nested collections in a flexible and user-friendly manner. Finally, we have added an interactive mode, allowing for paginated output. At the beginning of the report, ROOT is presented with examples of where it is used and how important it is. Then, the motivation behind the project is elaborated, by presenting the previous state of the software package and its potential for improvement. Further, the process in wh...

  13. All-printed paper memory

    Lien, Derhsien

    2014-08-26

    We report the memory device on paper by means of an all-printing approach. Using a sequence of inkjet and screen-printing techniques, a simple metal-insulator-metal device structure is fabricated on paper as a resistive random access memory with a potential to reach gigabyte capacities on an A4 paper. The printed-paper-based memory devices (PPMDs) exhibit reproducible switching endurance, reliable retention, tunable memory window, and the capability to operate under extreme bending conditions. In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease of data handling, which are not achievable for regular silicon-based electronic devices. We envision that the PPMDs manufactured by this cost-effective and time-efficient all-printing approach would be a key electronic component to fully activate a paper-based circuit and can be directly implemented in medical biosensors, multifunctional devices, and self-powered systems. © 2014 American Chemical Society.

  14. Catalytic microcontact printing without ink

    Li, X.; Péter, M.; Huskens, Jurriaan; Reinhoudt, David

    2003-01-01

    A novel microcontact printing technique is described that does not require ink. Patterns were created by direct contact of oxidized PDMS stamps with silyl ether-derivatized, acid-labile SAMs on gold. The surface of the stamps was oxidized by oxygen plasma to give a layer of silicon oxide. These

  15. Microcontact printing: limitations and achievements

    Perl, A.; Reinhoudt, David; Huskens, Jurriaan

    2009-01-01

    Microcontact printing (µCP) offers a simple and low-cost surface patterning methodology with high versatility and sub-micrometer accuracy. The process has undergone a spectacular evolution since its invention, improving its capability to form sub-100 nm SAM patterns of various polar and apolar

  16. All-printed paper memory

    He, Jr-Hau; Lin, Chun-Ho; Lien, Der-Hsien

    2016-01-01

    All-printed paper-based substrate memory devices are described. In an embodiment, a paper-based memory device is prepared by coating one or more areas of a paper substrate with a conductor material such as a carbon paste, to form a first electrode

  17. Tender for printing annual report

    Technology, Govt. of India, needs book “Annual Report” to be printed as per below mentioned specification .Eligible vendors (as ... any one of the documents asked is not enclosed, the quotation will not be considered. ... The EMD of selected bidder(s) will be kept as security deposit till ... contract by telephonically or E-Mail.

  18. Latin American Folk Art Prints

    Navah, Jan

    2011-01-01

    Latin American customs and colors play an important role as second graders are introduced to multicultural experiences through food, music, dance, art, and craft. In this article, the author describes a printing project inspired by Guatemalan weavings and amate bark paintings. (Contains 2 online resources.)

  19. Printing in Ubiquitous Computing Environments

    Karapantelakis, Athanasios; Delvic, Alisa; Zarifi Eslami, Mohammed; Khamit, Saltanat

    Document printing has long been considered an indispensable part of the workspace. While this process is considered trivial and simple for environments where resources are ample (e.g. desktop computers connected to printers within a corporate network), it becomes complicated when applied in a mobile

  20. Leonhardi Euleri Opera omnia: Editing the works and correspondence of Leonhard Euler

    Andreas KLEINERT

    2015-12-01

    Full Text Available The paper gives an overview on the history and present state of the edition of the complete works of Leonhard Euler (1707–1783. After several failed initiatives in the 19th century, the project began in 1907 with the edition of Euler’s printed works. The works were divided into three series: I. Mathematics (29 volumes; II. Mechanics and Astronomy (31 volumes; and III. Physics and Miscellaneous (12 volumes. After several ups and downs due to two World Wars and economic problems, the publication of the printed works with a total of 72 volumes is nearly finished. Only two volumes on perturbation theory in astronomy are still missing. The publication of series IV (manuscripts and correspondence started in 1967 as a joint project of the Swiss and the Soviet academies of sciences. The manuscript edition was postponed, and the project focussed on Euler’s correspondence which contains approximately 3000 letters, 1000 of them written by Euler. The correspondents include famous mathematicians of the 18th century like d’Alembert, Clairaut and the Bernoullis, but also many less-known people with whom Euler corresponded on a great variety of subjects. A major problem is to find and to finance appropriate editors who are able to read French, Latin, and the old German handwriting, and who are acquainted with history, culture and science of the 18th century. During the last 50 years, the editors gathered copies or scans of most of the preserved Euler’s letters. The original letters addressed to Euler were made available to the editorial group in Switzerland by the Russian Academy of Sciences before World War I, and before their restitution in 1947 the editors made fairly good photographs that are now an important part of the material basis of the edition. Each volume of the letter series (VIA contains Euler’s correspondence with one or more of his contemporaries, presented in a chronological order. Up to the present day, four volumes of the

  1. GPU Computing Gems Emerald Edition

    Hwu, Wen-mei W

    2011-01-01

    ".the perfect companion to Programming Massively Parallel Processors by Hwu & Kirk." -Nicolas Pinto, Research Scientist at Harvard & MIT, NVIDIA Fellow 2009-2010 Graphics processing units (GPUs) can do much more than render graphics. Scientists and researchers increasingly look to GPUs to improve the efficiency and performance of computationally-intensive experiments across a range of disciplines. GPU Computing Gems: Emerald Edition brings their techniques to you, showcasing GPU-based solutions including: Black hole simulations with CUDA GPU-accelerated computation and interactive display of

  2. 3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution

    Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

    2018-01-01

    In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid: glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements. PMID:28244880

  3. 3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution.

    Guo, Ting; Holzberg, Timothy R; Lim, Casey G; Gao, Feng; Gargava, Ankit; Trachtenberg, Jordan E; Mikos, Antonios G; Fisher, John P

    2017-04-12

    In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development and computer-aided scaffold design, current quantitative analyses do not correlate material properties, printing parameters, and printing outcomes to a great extent. A model that correlates these properties has tremendous potential to standardize 3D printing for tissue engineering and biomaterial science. In this study, we printed poly(lactic-co-glycolic acid) (PLGA) utilizing a direct melt extrusion technique without additional ingredients. We investigated PLGA with various lactic acid:glycolic acid (LA:GA) molecular weight ratios and end caps to demonstrate the dependence of the extrusion process on the polymer composition. Micro-computed tomography was then used to evaluate printed scaffolds containing different LA:GA ratios, composed of different fiber patterns, and processed under different printing conditions. We built a statistical model to reveal the correlation and predominant factors that determine printing precision. Our model showed a strong linear relationship between the actual and predicted precision under different combinations of printing conditions and material compositions. This quantitative examination establishes a significant foreground to 3D print biomaterials following a systematic fabrication procedure. Additionally, our proposed statistical models can be applied to couple specific biomaterials and 3D printing applications for patient implants with particular requirements.

  4. Patient-specific three-dimensional printing for pre-surgical planning in hepatocellular carcinoma treatment.

    Perica, Elizabeth; Sun, Zhonghua

    2017-12-01

    Recently, three-dimensional (3D) printing has shown great interest in medicine, and 3D printed models may be rendered as part of the pre-surgical planning process in order to better understand the complexities of an individual's anatomy. The aim of this study is to investigate the feasibility of utilising 3D printed liver models as clinical tools in pre-operative planning for resectable hepatocellular carcinoma (HCC) lesions. High-resolution contrast-enhanced computed tomography (CT) images were acquired and utilized to generate a patient-specific 3D printed liver model. Hepatic structures were segmented and edited to produce a printable model delineating intrahepatic anatomy and a resectable HCC lesion. Quantitative assessment of 3D model accuracy compared measurements of critical anatomical landmarks acquired from the original CT images, standard tessellation language (STL) files, and the 3D printed liver model. Comparative analysis of surveys completed by two radiologists investigated the clinical value of 3D printed liver models in radiology. The application of utilizing 3D printed liver models as tools in surgical planning for resectable HCC lesions was evaluated through kappa analysis of questionnaires completed by two abdominal surgeons. A scaled down multi-material 3D liver model delineating patient-specific hepatic anatomy and pathology was produced, requiring a total production time of 25.25 hours and costing a total of AUD $1,250. A discrepancy was found in the total mean of measurements at each stage of production, with a total mean of 18.28±9.31 mm for measurements acquired from the original CT data, 15.63±8.06 mm for the STL files, and 14.47±7.71 mm for the 3D printed liver model. The 3D liver model did not enhance the radiologists' perception of patient-specific anatomy or pathology. Kappa analysis of the surgeon's responses to survey questions yielded a percentage agreement of 80%, and a κ value of 0.38 (P=0.24) indicating fair agreement. Study

  5. Time within time: 3D printed sculptures within holographic art practice

    Chang, Yin-Ren; Richardson, Martin

    2015-03-01

    Holography is a time-based medium, which uses its own aesthetics and techniques to interpret colour and light. This exclusive descriptive language does not simply represent a particular scenario in the moment of recording, but also documents the performance light during the shooting process. Nowadays 3D graphic software and Internet offer practitioners greater mobility in both the development and the delivery of their artwork. Furthermore, the diverse web-based social media presents unlimited and various spaces to facilitate artists in the exchange of creative knowledge, it enables them to collaborate on their projects with external connections - audience, specialists, etc. Within the analogue holography art practice, there is a primary lack of interface, or, in other words, it cannot utilise any digital creative tools. 3D printing makes it possible to bridge the gap between cyber space and the holographic world; even more so, as this emerging technique also becomes a platform, which can connect computational data and light information. The application of 3D printing in contemporary art will reshape the process of creation, as well as the form of visual narrative itself. New technologies continually and increasingly involve the projection of another artistic dimension, and the term "visual" embarks on challenging the generally accepted notion of understanding art and interacting with it. As new pathways of practice are established, it will take years to build a complete understanding of this medium in order to be able to take a full advantage of the benefits its use offers. This paper is aimed at looking for the potential new ways of artistic expression, deriving from the interrelation between analogue holography and 3D printing. It will also attempt an articulate assessment of 3D printing within the dynamic holographic aesthetics.

  6. RCC-MX (2008 edition)

    Bravo, X.; Drubay, B.

    2008-10-01

    The RCC-MX books is a compilation of design and construction rules for the mechanical materials of experimental reactors, for their auxiliaries and irradiation devices. This second edition includes the updates of references to NF, EN and ISO standards, the compliance with the regulations for nuclear pressure equipments, and the feedback since the 2005 edition. It comprises 9 books and a CD-Rom and includes a presentation document. The RCC-MX has been developed for the Jules Horowitz reactor but can be used for the design and construction of new projects of new experimental reactors or new equipments and devices for existing facilities. Content: - Book 1: general dispositions, materials for experimental reactors and their auxiliaries, for irradiation devices and for control or handling mechanisms, complementary requirements and particular dispositions; - Book 2: materials for the reactor and for its level 1 auxiliaries; - Book 3: materials for the reactor and for its level 2 and level 3 auxiliaries, control and handling mechanisms, materials for irradiation devices; - Book 4: technical appendixes - materials characteristics (steels and alloys); - Book 5: technical appendixes (design rules); - Book 6: technical specifications of materials; - Book 7: tests and control methods; - Book 8: welding; - Book 9: fabrication. (J.S.)

  7. Cost-estimating for commercial digital printing

    Keif, Malcolm G.

    2007-01-01

    The purpose of this study is to document current cost-estimating practices used in commercial digital printing. A research study was conducted to determine the use of cost-estimating in commercial digital printing companies. This study answers the questions: 1) What methods are currently being used to estimate digital printing? 2) What is the relationship between estimating and pricing digital printing? 3) To what extent, if at all, do digital printers use full-absorption, all-inclusive hourly rates for estimating? Three different digital printing models were identified: 1) Traditional print providers, who supplement their offset presswork with digital printing for short-run color and versioned commercial print; 2) "Low-touch" print providers, who leverage the power of the Internet to streamline business transactions with digital storefronts; 3) Marketing solutions providers, who see printing less as a discrete manufacturing process and more as a component of a complete marketing campaign. Each model approaches estimating differently. Understanding and predicting costs can be extremely beneficial. Establishing a reliable system to estimate those costs can be somewhat challenging though. Unquestionably, cost-estimating digital printing will increase in relevance in the years ahead, as margins tighten and cost knowledge becomes increasingly more critical.

  8. Selecting suitable enclosures for digitally printed materials

    Burge, D; Rima, L

    2010-01-01

    It cannot be assumed that storage enclosures considered safe for traditionally printed images and documents are suitable for modern, digitally printed materials. In this project, a large variety of digital print types were tested using a modified version of the ISO 18916 Imaging materials-Processed imaging materials-Photographic activity test for enclosure materials standard to assess the risk to digital prints by paper enclosures known to be inert or reactive with traditional photographic prints. The types of enclosures tested included buffered and non-buffered cotton papers, and groundwood paper. In addition, qualitative filter paper that had been wetted and dried with either an acidic or basic solution was also tested to determine the effects of enclosure pH on digitally printed materials. It was determined that, in general, digital prints tended to be less reactive with various enclosure types than traditional prints. Digital prints were most sensitive to paper that contained groundwood. The enclosure reactivity test results were then integrated with previous published work on the tendencies of various enclosure types to abrade, ferrotype, or block to digital prints in order to create a comprehensive set of recommendations for digital print storage enclosures.

  9. Customizing digital printing for fine art practice

    Parraman, Carinna E.; Thirkell, Paul; Hoskins, Steve; Wang, Hong Qiang; Laidler, Paul

    2005-01-01

    The presentation will demonstrate how through alternative methods of digital print production the Centre for Fine Print Research (CFPR) is developing methodologies for digital printing that attempt to move beyond standard reproductive print methods. Profiling is used for input and output hardware, along with bespoke profiling for fine art printmaking papers. Examples of artist's work, and examples from the Perpetual Portfolio are included - an artist in residence scheme for selected artists wanting to work at the Centre and to make a large-format digital print. Colour is an important issue: colour fidelity, colour density on paper, colour that can be achieved through multiple-pass printing. Research is also underway to test colour shortfalls in the current inkjet ink range, and to extend colour through the use of traditional printing inks.

  10. PRINTING TECHNIQUES: RECENT DEVELOPMENTS IN PHARMACEUTICAL TECHNOLOGY.

    Jamroz, Witold; Kurek, Mateusz; Lyszczarz, Ewelina; Brniak, Witold; Jachowicz, Renata

    2017-05-01

    In the last few years there has been a huge progress in a development of printing techniques and their application in pharmaceutical sciences and particularly in the pharmaceutical technology. The variety of printing methods makes it necessary to systemize them, explain the principles of operation, and specify the possibilities of their use in pharmaceutical technology. This paper aims to review the printing techniques used in a drug development process. The growing interest in 2D and 3D printing methods results in continuously increasing number of scientific papers. Introduction of the first printed drug Spritam@ to the market seems to be a milestone of the 3D printing development. Thus, a particular aim of this review is to show the latest achievements of the researchers in the field of the printing medicines.

  11. Mod silver metallization: Screen printing and ink-jet printing

    Vest, R. W.; Vest, G. M.

    1985-01-01

    Basic material efforts have proven to be very successful. Adherent and conductive films were achieved. A silver neodecanoate/bismuth 2-ethylhexanoate mixture has given the best results in both single and double layer applications. Another effort is continuing to examine the feasibility of applying metallo-organic deposition films by use of an ink jet printer. Direct line writing would result in a saving of process time and materials. So far, some well defined lines have been printed.

  12. Fusion Canada issue 32. Final edition

    1997-07-01

    Fusion Canada is a bulletin of the National Fusion Program, this is the last edition. Included in this July edition are articles on Funding for Canada's fusion program, Research and Development on TdeV-96 , Divertor Maintenance Robotics and reference listing for Canada's Fusion research and development sites

  13. Bibliography of Fynbos ecology: 2nd edition

    Manders, PT

    1989-12-01

    Full Text Available The first edition of a bibliography of fynbos ecology was produced in 1981 and comprised 814 references to work completed or commenced prior to the initiation of the Fynbos Biome Project. It is appropriate that this second edition...

  14. Edit Distance to Monotonicity in Sliding Windows

    Chan, Ho-Leung; Lam, Tak-Wah; Lee, Lap Kei

    2011-01-01

    Given a stream of items each associated with a numerical value, its edit distance to monotonicity is the minimum number of items to remove so that the remaining items are non-decreasing with respect to the numerical value. The space complexity of estimating the edit distance to monotonicity of a ...

  15. Managing the Incompetent Teacher. Second Edition.

    Bridges, Edwin M.

    Featuring the same practical guidelines for ridding schools of incompetent teachers as the 1984 edition, this new edition incorporates substantially revised material on three topics: criteria and information sources for evaluating teaching effectiveness, remediation procedures, and grounds for dismissal. The book presents an eight-step systematic,…

  16. Accounting for Independent Schools. Second Edition.

    National Association of Independent Schools, Boston, MA.

    This is a thoroughly revised edition of the 1969 publication, "Accounting for Independent Schools," a guide that attempted to codify basic accounting principles and practices for specific application to independent schools. The focus of the second edition is more on refining practices than on initiating them, and more on extending the managerial…

  17. Banner prints social security numbers

    Robbins RA

    2014-01-01

    No abstract available. Article truncated at 150 words. The Monday edition of the Arizona Republic contained a story with potential interest to our readers. On the most recent address labels of Banner Health's magazine, Smart & Healthy, the addressee's Social Security or Medicare identification numbers, which are often identical to their Social Security numbers (1). The magazine was mailed to more than 50,000 recipients in Arizona late last week. The recipients are members of the Medicare Pion...

  18. READ-EVAL-PRINT in Parallel and Asynchronous Proof-checking

    Makarius Wenzel

    2013-07-01

    Full Text Available The LCF tradition of interactive theorem proving, which was started by Milner in the 1970-ies, appears to be tied to the classic READ-EVAL-PRINT-LOOP of sequential and synchronous evaluation of prover commands. We break up this loop and retrofit the read-eval-print phases into a model of parallel and asynchronous proof processing. Thus we explain some key concepts of the Isabelle/Scala approach to prover interaction and integration, and the Isabelle/jEdit Prover IDE as front-end technology. We hope to open up the scientific discussion about non-trivial interaction models for ITP systems again, and help getting other old-school proof assistants on a similar track.

  19. Ebola virus RNA editing depends on the primary editing site sequence and an upstream secondary structure.

    Masfique Mehedi

    Full Text Available Ebolavirus (EBOV, the causative agent of a severe hemorrhagic fever and a biosafety level 4 pathogen, increases its genome coding capacity by producing multiple transcripts encoding for structural and nonstructural glycoproteins from a single gene. This is achieved through RNA editing, during which non-template adenosine residues are incorporated into the EBOV mRNAs at an editing site encoding for 7 adenosine residues. However, the mechanism of EBOV RNA editing is currently not understood. In this study, we report for the first time that minigenomes containing the glycoprotein gene editing site can undergo RNA editing, thereby eliminating the requirement for a biosafety level 4 laboratory to study EBOV RNA editing. Using a newly developed dual-reporter minigenome, we have characterized the mechanism of EBOV RNA editing, and have identified cis-acting sequences that are required for editing, located between 9 nt upstream and 9 nt downstream of the editing site. Moreover, we show that a secondary structure in the upstream cis-acting sequence plays an important role in RNA editing. EBOV RNA editing is glycoprotein gene-specific, as a stretch encoding for 7 adenosine residues located in the viral polymerase gene did not serve as an editing site, most likely due to an absence of the necessary cis-acting sequences. Finally, the EBOV protein VP30 was identified as a trans-acting factor for RNA editing, constituting a novel function for this protein. Overall, our results provide novel insights into the RNA editing mechanism of EBOV, further understanding of which might result in novel intervention strategies against this viral pathogen.

  20. Ebola virus RNA editing depends on the primary editing site sequence and an upstream secondary structure.

    Mehedi, Masfique; Hoenen, Thomas; Robertson, Shelly; Ricklefs, Stacy; Dolan, Michael A; Taylor, Travis; Falzarano, Darryl; Ebihara, Hideki; Porcella, Stephen F; Feldmann, Heinz

    2013-01-01

    Ebolavirus (EBOV), the causative agent of a severe hemorrhagic fever and a biosafety level 4 pathogen, increases its genome coding capacity by producing multiple transcripts encoding for structural and nonstructural glycoproteins from a single gene. This is achieved through RNA editing, during which non-template adenosine residues are incorporated into the EBOV mRNAs at an editing site encoding for 7 adenosine residues. However, the mechanism of EBOV RNA editing is currently not understood. In this study, we report for the first time that minigenomes containing the glycoprotein gene editing site can undergo RNA editing, thereby eliminating the requirement for a biosafety level 4 laboratory to study EBOV RNA editing. Using a newly developed dual-reporter minigenome, we have characterized the mechanism of EBOV RNA editing, and have identified cis-acting sequences that are required for editing, located between 9 nt upstream and 9 nt downstream of the editing site. Moreover, we show that a secondary structure in the upstream cis-acting sequence plays an important role in RNA editing. EBOV RNA editing is glycoprotein gene-specific, as a stretch encoding for 7 adenosine residues located in the viral polymerase gene did not serve as an editing site, most likely due to an absence of the necessary cis-acting sequences. Finally, the EBOV protein VP30 was identified as a trans-acting factor for RNA editing, constituting a novel function for this protein. Overall, our results provide novel insights into the RNA editing mechanism of EBOV, further understanding of which might result in novel intervention strategies against this viral pathogen.

  1. Mortars for 3D printing

    Demyanenko Olga

    2018-01-01

    Full Text Available The paper is aimed at developing scientifically proven compositions of mortars for 3D printing modified by a peat-based admixture with improved operational characteristics. The paper outlines the results of experimental research on hardened cement paste and concrete mixture with the use of modifying admixture MT-600 (thermally modified peat. It is found that strength of hardened cement paste increases at early age when using finely dispersed admixtures, which is the key factor for formation of construction and technical specifications of concrete for 3D printing technologies. The composition of new formations of hardened cement paste modified by MT-600 admixture were obtained, which enabled to suggest the possibility of their physico-chemical interaction while hardening.

  2. Influence of Software on the Features of Laser-printed Characters

    Yuanli Han

    2017-01-01

    Full Text Available Verifying the authenticity or otherwise of printed documents is one of the most important aspects of questioned document examination and plays a vital role in the field of forensic science. In recent years, continued developments in the quality of impression combined with ever-cheaper toner printers have allowed this technology to spread. It is now used in an increasing number of homes for all types of documents, including for criminal aims. Here, the factors that influence the printed features in text files are studied in relation to the operating system and the word processing software. The Net Application report in October 2014 showed that the market shares of Windows 7 and Windows XP were 53.05% and 17.18%, respectively. The Forrester report in October 2013 showed that the market share of Microsoft Office was more than 85%, the top three word processors being Microsoft Word 2003, 2007, and 2010. In this study, Windows XP (shortened to XP, Windows 7 (shortened to Win7, Microsoft Word 2003/2007/2010, WPS Office 2013, and the PDF format are chosen as the most common operating systems and word processing software. WPS Office was developed by the Chinese company Kingsoft Co., Ltd. and is widely used in China. A particular text file was designed and edited and was printed on a laser printer. The features of the printed characters were captured using an Anyty 3R digital microscope, Printer Expert, and X-printer devices. Coincidence comparison and outline feature extraction were used to evaluate the differences. It is shown that XP and Win7 have no effect on the printed features of text files. However, the printed features do depend to a certain extent on the word-processing software, with the PDF format having the greatest influence.

  3. Fuel Cell Handbook, Fifth Edition

    Energy and Environmental Solutions

    2000-10-31

    Progress continues in fuel cell technology since the previous edition of the Fuel Cell Handbook was published in November 1998. Uppermost, polymer electrolyte fuel cells, molten carbonate fuel cells, and solid oxide fuel cells have been demonstrated at commercial size in power plants. The previously demonstrated phosphoric acid fuel cells have entered the marketplace with more than 220 power plants delivered. Highlighting this commercial entry, the phosphoric acid power plant fleet has demonstrated 95+% availability and several units have passed 40,000 hours of operation. One unit has operated over 49,000 hours. Early expectations of very low emissions and relatively high efficiencies have been met in power plants with each type of fuel cell. Fuel flexibility has been demonstrated using natural gas, propane, landfill gas, anaerobic digester gas, military logistic fuels, and coal gas, greatly expanding market opportunities. Transportation markets worldwide have shown remarkable interest in fuel cells; nearly every major vehicle manufacturer in the U.S., Europe, and the Far East is supporting development. This Handbook provides a foundation in fuel cells for persons wanting a better understanding of the technology, its benefits, and the systems issues that influence its application. Trends in technology are discussed, including next-generation concepts that promise ultrahigh efficiency and low cost, while providing exceptionally clean power plant systems. Section 1 summarizes fuel cell progress since the last edition and includes existing power plant nameplate data. Section 2 addresses the thermodynamics of fuel cells to provide an understanding of fuel cell operation at two levels (basic and advanced). Sections 3 through 8 describe the six major fuel cell types and their performance based on cell operating conditions. Alkaline and intermediate solid state fuel cells were added to this edition of the Handbook. New information indicates that manufacturers have stayed

  4. Inkjet printed wireless smart bandage

    Farooqui, Muhammad Fahad; Shamim, Atif

    2016-01-01

    Chronic wounds affect millions of patients around the world and requires a major portion of health care budget for treatment. In this article, we present an unprecedented low cost continuous wireless monitoring system, realized through inkjet printing on a standard bandage strip, which can send early warnings as well as record long term wound progression data. The smart bandage can communicate upto a distance of 60 m when worn on the body.

  5. Inkjet printed wireless smart bandage

    Farooqui, Muhammad Fahad

    2016-12-19

    Chronic wounds affect millions of patients around the world and requires a major portion of health care budget for treatment. In this article, we present an unprecedented low cost continuous wireless monitoring system, realized through inkjet printing on a standard bandage strip, which can send early warnings as well as record long term wound progression data. The smart bandage can communicate upto a distance of 60 m when worn on the body.

  6. 3D Printed Bionic Ears

    Mannoor, Manu S.; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A.; Soboyejo, Winston O.; Verma, Naveen; Gracias, David H.; McAlpine, Michael C.

    2013-01-01

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the precise anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing. PMID:23635097

  7. 3D printed bionic ears.

    Mannoor, Manu S; Jiang, Ziwen; James, Teena; Kong, Yong Lin; Malatesta, Karen A; Soboyejo, Winston O; Verma, Naveen; Gracias, David H; McAlpine, Michael C

    2013-06-12

    The ability to three-dimensionally interweave biological tissue with functional electronics could enable the creation of bionic organs possessing enhanced functionalities over their human counterparts. Conventional electronic devices are inherently two-dimensional, preventing seamless multidimensional integration with synthetic biology, as the processes and materials are very different. Here, we present a novel strategy for overcoming these difficulties via additive manufacturing of biological cells with structural and nanoparticle derived electronic elements. As a proof of concept, we generated a bionic ear via 3D printing of a cell-seeded hydrogel matrix in the anatomic geometry of a human ear, along with an intertwined conducting polymer consisting of infused silver nanoparticles. This allowed for in vitro culturing of cartilage tissue around an inductive coil antenna in the ear, which subsequently enables readout of inductively-coupled signals from cochlea-shaped electrodes. The printed ear exhibits enhanced auditory sensing for radio frequency reception, and complementary left and right ears can listen to stereo audio music. Overall, our approach suggests a means to intricately merge biologic and nanoelectronic functionalities via 3D printing.

  8. Effects of Print Publication Lag in Dual Format Journals on Scientometric Indicators

    Heneberg, Petr

    2013-01-01

    Background Publication lag between manuscript submission and its final publication is considered as an important factor affecting the decision to submit, the timeliness of presented data, and the scientometric measures of the particular journal. Dual-format peer-reviewed journals (publishing both print and online editions of their content) adopted a broadly accepted strategy to shorten the publication lag: to publish the accepted manuscripts online ahead of their print editions, which may follow days, but also years later. Effects of this widespread habit on the immediacy index (average number of times an article is cited in the year it is published) calculation were never analyzed. Methodology/Principal Findings Scopus database (which contains nearly up-to-date documents in press, but does not reveal citations by these documents until they are finalized) was searched for the journals with the highest total counts of articles in press, or highest counts of articles in press appearing online in 2010–2011. Number of citations received by the articles in press available online was found to be nearly equal to citations received within the year when the document was assigned to a journal issue. Thus, online publication of in press articles affects severely the calculation of immediacy index of their source titles, and disadvantages online-only and print-only journals when evaluating them according to the immediacy index and probably also according to the impact factor and similar measures. Conclusions/Significance Caution should be taken when evaluating dual-format journals supporting long publication lag. Further research should answer the question, on whether the immediacy index should be replaced by an indicator based on the date of first publication (online or in print, whichever comes first) to eliminate the problems analyzed in this report. Information value of immediacy index is further questioned by very high ratio of authors’ self-citations among the

  9. New catalogue: Polish early printed editions in Scientific Library of Odesa I. I. Mechnikov National University

    I. Л. Великодна

    2014-07-01

    Full Text Available Рец. на кн. : Польські стародруки з колекцій університетської бібліотеки = Starodruki polskie ze zbiorów Biblioteki Uniwersyteckiej : каталог / упоряд.: Г. В. Великодна, О. Л. Ляшенко ; пер. О. Л. Ляшенко ; наук. ред. В. Валецький ; відп. ред. М. О. Подрезова ; бібліогр. ред. О. В. Полевщикова ; Одес. нац. ун-т ім. І. І. Мечникова, Наук. б-ка. – Одеса : «Одеський національний університет», 2012. – 379 с. : іл.

  10. Macs For Dummies, Pocket Edition

    Baig, Edward C

    2011-01-01

    The fun and easy way to make the most of your wonderful Mac. Simply Mac-nificent — all the cool things your Mac can do! This handy guide helps you figure out the nuts and bolts of your Mac. Navigate the Mac desktop, use the Safari Web browser to surf the Internet, e-mail photos to friends and family, create and print documents, rip audio CDs, and more. The fun begins right here!. Open the book and find: How to set up and configure your Mac; Tips for getting around on the Mac desktop; Steps for setting up an e-mail account and browsing the Internet; Details about the free programs that come wit

  11. VISUAL COMPONENT OF INTERNET EDITIONS AS A FACTOR IN THEIR POSITIONING AND PROMOTION

    Sergey Viktorovich Murashchenkov

    2017-04-01

    Full Text Available Purpose. Identify the specificity of the perception by consumer media through its adaptation in the form of an Internet resource. Consider the possibility of establishing universal principles of design online version of the printed edition, simplified as much as possible and comfortable to use, paying particular attention to the design and layout of the publication, including news blocks, which important for the development of media in social science. Methodology. The article is an summary of original study based on the results of focus groups conducted in the context of the present topic. Methodology comprise the analytical study and psychoanalysis. Results. The results of the study are that the authors try to identify the main features of the development of the Internet version of the print edition of its region. The result of this work demonstrates the universal ways of mapping the functional and visual component layout of the site, which can be applied in the same media. Authors try to focus on the main page of the online version of the publication and attach the particular importance to the selection of fonts and color palettes for design that promotes a more comfortable use of the resource and also note the importance of adapting the site to the mobile version. Practical implications. The results of the study can be applied in the field of social psychology, advertising, design and journalism.

  12. Genome edited animals: Learning from GM crops?

    Bruce, Ann

    2017-06-01

    Genome editing of livestock is poised to become commercial reality, yet questions remain as to appropriate regulation, potential impact on the industry sector and public acceptability of products. This paper looks at how genome editing of livestock has attempted to learn some of the lessons from commercialisation of GM crops, and takes a systemic approach to explore some of the complexity and ambiguity in incorporating genome edited animals in a food production system. Current applications of genome editing are considered, viewed from the perspective of past technological applications. The question of what is genome editing, and can it be considered natural is examined. The implications of regulation on development of different sectors of livestock production systems are studied, with a particular focus on the veterinary sector. From an EU perspective, regulation of genome edited animals, although not necessarily the same as for GM crops, is advocated from a number of different perspectives. This paper aims to open up new avenues of research on genome edited animals, extending from the current primary focus on science and regulation, to engage with a wider-range of food system actors.

  13. Three-dimensional bio-printing.

    Gu, Qi; Hao, Jie; Lu, YangJie; Wang, Liu; Wallace, Gordon G; Zhou, Qi

    2015-05-01

    Three-dimensional (3D) printing technology has been widely used in various manufacturing operations including automotive, defence and space industries. 3D printing has the advantages of personalization, flexibility and high resolution, and is therefore becoming increasingly visible in the high-tech fields. Three-dimensional bio-printing technology also holds promise for future use in medical applications. At present 3D bio-printing is mainly used for simulating and reconstructing some hard tissues or for preparing drug-delivery systems in the medical area. The fabrication of 3D structures with living cells and bioactive moieties spatially distributed throughout will be realisable. Fabrication of complex tissues and organs is still at the exploratory stage. This review summarize the development of 3D bio-printing and its potential in medical applications, as well as discussing the current challenges faced by 3D bio-printing.

  14. Study of lip prints: A forensic study

    Vikash Ranjan

    2014-01-01

    Full Text Available Background: Although several studies have been done on lip prints for human identification in forensic science, there is a doubt about their use in gender determination. Aims: The present study was designed to study the lip groove patterns in all the quadrants of both male and female subjects to identify the sex, based on the patterns of the grooves of the lip prints. Study Design: 300 lip prints were collected from volunteers of D. J. College of Dental Sciences and Research, Modinagar (UP. Materials and Methods: Lip prints were recorded with lip stick and transferred on to a glass slide. Statistical Analysis: Pearson chi-square test was adopted for statistical analysis and probability value (P value was calculated. Conclusion: In our study, none of the lip prints were identical, thus confirming the role of lip prints in individual identification. According to Suzuki′s classification, Type I, II, III and IV patterns were significant in gender determination.

  15. Plasma jet printing for flexible substrates

    Gandhiraman, Ram P.; Singh, Eric; Diaz-Cartagena, Diana C.; Koehne, Jessica; Meyyappan, M. [Center for Nanotechnology, NASA Ames Research Center, Moffett Field, California 94035 (United States); Nordlund, Dennis [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States)

    2016-03-21

    Recent interest in flexible electronics and wearable devices has created a demand for fast and highly repeatable printing processes suitable for device manufacturing. Robust printing technology is critical for the integration of sensors and other devices on flexible substrates such as paper and textile. An atmospheric pressure plasma-based printing process has been developed to deposit different types of nanomaterials on flexible substrates. Multiwalled carbon nanotubes were deposited on paper to demonstrate site-selective deposition as well as direct printing without any type of patterning. Plasma-printed nanotubes were compared with non-plasma-printed samples under similar gas flow and other experimental conditions and found to be denser with higher conductivity. The utility of the nanotubes on the paper substrate as a biosensor and chemical sensor was demonstrated by the detection of dopamine, a neurotransmitter, and ammonia, respectively.

  16. Active materials by four-dimension printing

    Ge, Qi; Qi, H. Jerry; Dunn, Martin L.

    2013-09-01

    We advance a paradigm of printed active composite materials realized by directly printing glassy shape memory polymer fibers in an elastomeric matrix. We imbue the active composites with intelligence via a programmed lamina and laminate architecture and a subsequent thermomechanical training process. The initial configuration is created by three-dimension (3D) printing, and then the programmed action of the shape memory fibers creates time dependence of the configuration—the four-dimension (4D) aspect. We design and print laminates in thin plate form that can be thermomechanically programmed to assume complex three-dimensional configurations including bent, coiled, and twisted strips, folded shapes, and complex contoured shapes with nonuniform, spatially varying curvature. The original flat plate shape can be recovered by heating the material again. We also show how the printed active composites can be directly integrated with other printed functionalities to create devices; here we demonstrate this by creating a structure that can assemble itself.

  17. High speed printing with polygon scan heads

    Stutz, Glenn

    2016-03-01

    To reduce and in many cases eliminate the costs associated with high volume printing of consumer and industrial products, this paper investigates and validates the use of the new generation of high speed pulse on demand (POD) lasers in concert with high speed (HS) polygon scan heads (PSH). Associated costs include consumables such as printing ink and nozzles, provisioning labor, maintenance and repair expense as well as reduction of printing lines due to high through put. Targets that are applicable and investigated include direct printing on plastics, printing on paper/cardboard as well as printing on labels. Market segments would include consumer products (CPG), medical and pharmaceutical products, universal ID (UID), and industrial products. In regards to the POD lasers employed, the wavelengths include UV(355nm), Green (532nm) and IR (1064nm) operating within the repetition range of 180 to 250 KHz.

  18. Prints Charles ja prints Michael külastasid Tallinna kirikuid / Allan Tammiku

    Tammiku, Allan

    2001-01-01

    Prints Charles külastas 6. novembril Eesti-visiidi ajal Tallinna toomkirikut ja Pühavaimu kirikut, prints Michael viibis Tallinnas 11. novembril eravisiidil, ta külastas toomkirikut, Niguliste ja Pühavaimu kirikut

  19. Your Next Airplane: Just Hit Print

    2013-04-01

    significantly impact the market, but if properly managed, 3-D printing can revolutionize the military through three principal benefits : cost...applications arise, many of which can be tailored to either commercial benefit or military utility. For the military to steer the dialogue over the...from custom chocolate sculptures, to firearms printed in your basement, to light-weight, fuel-efficient printed cars. University research grants

  20. Realization of superconductive films by screen printing

    Baudry, H.

    1988-01-01

    Screen printing is a promising method to manufacture superconductive lines making use of superconductive ceramics. An ink has been realized with YBa 2 Cu 3 0 7-x' and the process conditions defined by thermal analysis. A superconductive transition is observed after screen printing on MgO. The firing of the layer is made at 920 0 C followed by a reoxidation step at 420 0 C. The silver electrical contacts are also screen printed [fr

  1. Digital Dentistry — 3D Printing Applications

    Zaharia Cristian; Gabor Alin-Gabriel; Gavrilovici Andrei; Stan Adrian Tudor; Idorasi Laura; Sinescu Cosmin; Negruțiu Meda-Lavinia

    2017-01-01

    Three-dimensional (3D) printing is an additive manufacturing method in which a 3D item is formed by laying down successive layers of material. 3D printers are machines that produce representations of objects either planned with a CAD program or scanned with a 3D scanner. Printing is a method for replicating text and pictures, typically with ink on paper. We can print different dental pieces using different methods such as selective laser sintering (SLS), stereolithography, fused deposition mo...

  2. Application of autoradiography in finger print analysis

    Stverak, B.; Kopejtko, J.; Simek, J.

    1983-01-01

    In order to broaden the possibilities of developing latent finger prints a tracer technique has been developed using sup(110m)Ag and autoradiographic imaging. This method has been tested on glass, paper and certain plastics. On paper it is possible to visualize finger prints even after previous development using Ninhydrin. It is shown that usable finger prints may be obtained also from materials from which they cannot be obtained using classical methods, e.g., polyethylene and simulated leather. (author)

  3. ERP system for 3D printing industry

    Deaky Bogdan

    2017-01-01

    Full Text Available GOCREATE is an original cloud-based production management and optimization service which helps 3D printing service providers to use their resources better. The proposed Enterprise Resource Planning system can significantly increase income through improved productivity. With GOCREATE, the 3D printing service providers get a much higher production efficiency at a much lower licensing cost, to increase their competitiveness in the fast growing 3D printing market.

  4. Functional electronic screen printing – electroluminescent smart fabric watch

    de Vos, Marc; Torah, Russel; Beeby, Steve; Tudor, John

    2013-01-01

    Motivation for screen printed smart fabrics.Introduce functional electronic screen printing on fabrics.Printed smart fabric watch design.Printing process for electroluminescent watch.Demonstration video.Conclusions and further work.Examples of other screen printed smart fabrics.

  5. A STUDY OF RELATIVE CORRELATION BETWEEN THE PATTERN OF FINGER PRINTS AND LIP PRINTS

    Murugan; Karikalan

    2014-01-01

    BACKGROUND AND OBJECTIVE: The use of conventional methods such as dactylography (study of finger prints) & cheiloscopy (study of lip prints) is of paramount importance, since personal identification by other means such as DNA analysis is sophisticated and not available in rural and developing countries. Fingerprint in its narrow sense is an impression left by the friction ridges of human fingers. The second prints of interest are lip prints. Studies of association between ...

  6. ExpEdit: a webserver to explore human RNA editing in RNA-Seq experiments.

    Picardi, Ernesto; D'Antonio, Mattia; Carrabino, Danilo; Castrignanò, Tiziana; Pesole, Graziano

    2011-05-01

    ExpEdit is a web application for assessing RNA editing in human at known or user-specified sites supported by transcript data obtained by RNA-Seq experiments. Mapping data (in SAM/BAM format) or directly sequence reads [in FASTQ/short read archive (SRA) format] can be provided as input to carry out a comparative analysis against a large collection of known editing sites collected in DARNED database as well as other user-provided potentially edited positions. Results are shown as dynamic tables containing University of California, Santa Cruz (UCSC) links for a quick examination of the genomic context. ExpEdit is freely available on the web at http://www.caspur.it/ExpEdit/.

  7. Photooxidation stability of microcapsules in thermochromic prints

    Mirela Rozic

    2018-03-01

    Full Text Available In this paper, photochemical stability of two thermochromic prints was investigated: vegetable oil based offset and UV curing screen printing ink. The obtained preliminary results can be used for further detailed examination of prints stability. It is well known that thermochromic printing inks are very unstabile when exsposed to UV irradiance and this is why they are mainly used for applications that are not directly exposed to sunlight. The results of the study show the heterogeneous nature of photooxidative degradation of thermochromic prints, and the opposite behaviour of photooxidation can be noticed comparing examined prints. Microcapsules in the UV curable screen print by fixation with polar polymer binder can create a new products stable to photoxidation. For this reason, the areas where the microcapsules and binder are bonded together are stable. Degraded only areas where binder is not related to microcapsules. Microcapsules in offset print do not have the ability to create new stabile forms due to smaller polarity and different chemical composition of the offset oxidized binder. In the offset print, the microcapsules are the least photooxidative stable and also cause lower photooxidative stability of the binder in contact with them. Cavities are formed in the areas where microcapsules are in contact with the binder, while the areas in which the binder is not in contact with microcapsules are not degraded.

  8. Active origami by 4D printing

    Ge, Qi; Qi, H Jerry; Dunn, Martin L; Dunn, Conner K

    2014-01-01

    Recent advances in three dimensional (3D) printing technology that allow multiple materials to be printed within each layer enable the creation of materials and components with precisely controlled heterogeneous microstructures. In addition, active materials, such as shape memory polymers, can be printed to create an active microstructure within a solid. These active materials can subsequently be activated in a controlled manner to change the shape or configuration of the solid in response to an environmental stimulus. This has been termed 4D printing, with the 4th dimension being the time-dependent shape change after the printing. In this paper, we advance the 4D printing concept to the design and fabrication of active origami, where a flat sheet automatically folds into a complicated 3D component. Here we print active composites with shape memory polymer fibers precisely printed in an elastomeric matrix and use them as intelligent active hinges to enable origami folding patterns. We develop a theoretical model to provide guidance in selecting design parameters such as fiber dimensions, hinge length, and programming strains and temperature. Using the model, we design and fabricate several active origami components that assemble from flat polymer sheets, including a box, a pyramid, and two origami airplanes. In addition, we directly print a 3D box with active composite hinges and program it to assume a temporary flat shape that subsequently recovers to the 3D box shape on demand. (paper)

  9. 3D Bio-Printing Review

    Du, Xianbin

    2018-01-01

    Ultimate goal of tissue engineering is to replace pathological or necrotic body tissue or organ by artificial tissue or organ and tissue engineering is a very promising research field. 3D bio-printing is a kind of emerging technologies and a branch of tissue engineering. It has made significant progress in the past decade. 3D bio-printing can realize tissue and organ construction in vitro and has wide application in basic research and pharmacy. This paper is to make an analysis and review on 3D bio-printing from the perspectives of bioink, printing technology and technology application.

  10. Embedding complex objects with 3d printing

    Hussain, Muhammad Mustafa

    2017-10-12

    A CMOS technology-compatible fabrication process for flexible CMOS electronics embedded during additive manufacturing (i.e. 3D printing). A method for such a process may include printing a first portion of a 3D structure; pausing the step of printing the 3D structure to embed the flexible silicon substrate; placing the flexible silicon substrate in a cavity of the first portion of the 3D structure to embed the flexible silicon substrate in the 3D structure; and resuming the step of printing the 3D structure to form the second portion of the 3D structure.

  11. Active origami by 4D printing

    Ge, Qi; Dunn, Conner K.; Qi, H. Jerry; Dunn, Martin L.

    2014-09-01

    Recent advances in three dimensional (3D) printing technology that allow multiple materials to be printed within each layer enable the creation of materials and components with precisely controlled heterogeneous microstructures. In addition, active materials, such as shape memory polymers, can be printed to create an active microstructure within a solid. These active materials can subsequently be activated in a controlled manner to change the shape or configuration of the solid in response to an environmental stimulus. This has been termed 4D printing, with the 4th dimension being the time-dependent shape change after the printing. In this paper, we advance the 4D printing concept to the design and fabrication of active origami, where a flat sheet automatically folds into a complicated 3D component. Here we print active composites with shape memory polymer fibers precisely printed in an elastomeric matrix and use them as intelligent active hinges to enable origami folding patterns. We develop a theoretical model to provide guidance in selecting design parameters such as fiber dimensions, hinge length, and programming strains and temperature. Using the model, we design and fabricate several active origami components that assemble from flat polymer sheets, including a box, a pyramid, and two origami airplanes. In addition, we directly print a 3D box with active composite hinges and program it to assume a temporary flat shape that subsequently recovers to the 3D box shape on demand.

  12. Banner Pages on the New Printing Infrastructure

    2006-01-01

    Changes to the printing service were announced in CERN Bulletin No. 37-38/2006. In the new infrastructure, the printing of the banner page has been disabled in order to reduce paper consumption. Statistics show that the average print job size is small and the paper savings by not printing the banner page could be up to 20 %. When each printer is moved onto the new infrastructure banner page printing will be disabled. In the case of corridor printers which are shared by several users, the Helpdesk can re-enable banner page printing upon request. We hope ultimately to arrive at a situation where banner page printing is enabled on fewer than 10% of printers registered on the network. You can still print banner pages on printers where it has been centrally disabled by using Linux. Simply add it to your print job on the client side by adding the -o job-sheets option to your lpr command. Detailed documentation is available on each SLC3/4 under the following link: http://localhost:631/sum.html#4_2 Please bea...

  13. BOOK REVIEW: A Journey with Fred Hoyle (Second Edition)

    Wickramasinghe, Chandra; Sterken, Christiaan

    2013-12-01

    the accepted views on the origin of life (the primordial soup theory). This led to their two "heresies": disease-causing viruses come from space, and microbial life is omnipresent in interstellar space. They also opposed Darwinian theory, and launched a frontal assault on conventional theories of biological evolution on Earth. Hoyle, though, always played the role of devil's advocate until he was convinced that there were overwhelming arguments to support one of his radical propositions. All of this was done before the era of mass communication and powerful computers. The book also is a testimony about how scientists really work and how they cope with deep cultural bias, argumentation based on articles of faith, misrepresentations, standard dogmas, prejudices, jealousies, political intrigues, irrelevant squabbles in the "cloisters of universities" and politicised academies of science. Most interesting is also that, already in the first edition, reference is made to the detrimental impact of the practice of counting research papers and citations, to the role of the media in reporting on big science, and to how the publishing business works. The story also reveals that, despite high productivity, the continuity of their team was repeatedly threatened. In this context, Chandra Wickramasinghe's statement "my work was a solace" can be seen as pep talk for the ears of any desperate young scientist. This book is well worth reading, not only by astronomy students (and their supervisors), but also by any student in the physical sciences. The book is beautifully typeset in LaTeX by Stallion Press, and printed on fine glossy paper. It is a pity that the graphics are rather poor reproductions of the original graphs. More disturbing, though, is the number of typographical errors that were present in the first edition, and were not corrected for the second edition.

  14. Marketing/Planning Library and Information Services. Second Edition.

    Weingand, Darlene E.

    In the first edition of this book, the concepts of marketing and planning library and information services were presented as effective managerial strategies. Several paragraphs from the introduction to the first edition are reproduced, with author commentary, in this edition as an affirmation that the message is still true. In this second edition,…

  15. Adult rat retinal ganglion cells and glia can be printed by piezoelectric inkjet printing

    Lorber, Barbara; Martin, Keith R; Hsiao, Wen-Kai; Hutchings, Ian M

    2014-01-01

    We have investigated whether inkjet printing technology can be extended to print cells of the adult rat central nervous system (CNS), retinal ganglion cells (RGC) and glia, and the effects on survival and growth of these cells in culture, which is an important step in the development of tissue grafts for regenerative medicine, and may aid in the cure of blindness. We observed that RGC and glia can be successfully printed using a piezoelectric printer. Whilst inkjet printing reduced the cell population due to sedimentation within the printing system, imaging of the printhead nozzle, which is the area where the cells experience the greatest shear stress and rate, confirmed that there was no evidence of destruction or even significant distortion of the cells during jet ejection and drop formation. Importantly, the viability of the cells was not affected by the printing process. When we cultured the same number of printed and non-printed RGC/glial cells, there was no significant difference in cell survival and RGC neurite outgrowth. In addition, use of a glial substrate significantly increased RGC neurite outgrowth, and this effect was retained when the cells had been printed. In conclusion, printing of RGC and glia using a piezoelectric printhead does not adversely affect viability and survival/growth of the cells in culture. Importantly, printed glial cells retain their growth-promoting properties when used as a substrate, opening new avenues for printed CNS grafts in regenerative medicine. (paper)

  16. MolPrint3D: Enhanced 3D Printing of Ball-and-Stick Molecular Models

    Paukstelis, Paul J.

    2018-01-01

    The increased availability of noncommercial 3D printers has provided instructors and students improved access to printing technology. However, printing complex ball-and-stick molecular structures faces distinct challenges, including the need for support structures that increase with molecular complexity. MolPrint3D is a software add-on for the…

  17. Komparasi Aplikasi Perangkat Lunak Sistem Klasifikasi DDC: Athenaeum Light 8.5, DFW Version 1.00, Webdewey 2.0, E-DDC Edition 22

    Wijaya Hardiati

    2012-01-01

    Librarian has many alternative to classify DDC (Dewey Decimal Classification) number. not only use printed DDC, but now DDC software to help identify DDC number is available. One of them is Athenaeum Light 8.5, DFW (Dewey For Windows) Version 1.00, WebDewey 2.0, e-DDC (electronic-Dewey Decimal Classification) Edition 22. In this paper, it will roll out about how to use software with it excess and deficiency.

  18. Komparasi Aplikasi Perangkat Lunak Sistem Klasifikasi DDC: Athenaeum Light 8.5, DFW Version 1.00, Webdewey 2.0, E-DDC Edition 22

    Wijaya Hardiati

    2012-05-01

    Full Text Available Librarian has many alternative to classify DDC (Dewey Decimal Classification number. not only use printed DDC, but now DDC software to help identify DDC number is available. One of them is Athenaeum Light 8.5, DFW (Dewey For Windows Version 1.00, WebDewey 2.0, e-DDC (electronic-Dewey Decimal Classification Edition 22. In this paper, it will roll out about how to use software with it excess and deficiency.

  19. Evolutionary Aesthetics and Print Advertising

    Kamil Luczaj

    2015-06-01

    Full Text Available The article analyzes the extent to which predictions based on the theory of evolutionary aesthetics are utilized by the advertising industry. The purpose of a comprehensive content analysis of print advertising is to determine whether the items indicated by evolutionists such as animals, flowers, certain types of landscapes, beautiful humans, and some colors are part of real advertising strategies. This article has shown that many evolutionary hypotheses (although not all of them are supported by empirical data. Along with these hypotheses, some inferences from Bourdieu’s cultural capital theory were tested. It turned out that advertising uses both biological schemata and cultural patterns to make an image more likable.

  20. Mail2Print online tutorial

    CERN. Geneva

    2016-01-01

    Mail2print is a feature which allows you to send documents to a printer by mail. This tutorial (text attached to the event page) explains how to use this service. Content owner: Vincent Nicolas Bippus Presenter: Pedro Augusto de Freitas Batista Tell us what you think via e-learning.support at cern.ch More tutorials in the e-learning collection of the CERN Document Server (CDS) https://cds.cern.ch/collection/E-learning%20modules?ln=en All info about the CERN rapid e-learning project is linked from http://twiki.cern.ch/ELearning  

  1. Karlsruhe nuclide chart - new 9. edition 2015

    Soti, Zsolt [European Commission, Joint Research Centre (JRC), Institute for Transuranium Elements (ITU), Postfach 2340, DE-76125 Karlsruhe, (Germany); Magill, Joseph; Pfennig, Gerda; Derher, Raymond [Nucleonica GmbH, c/o European Commission, Postfach 2340, DE-76125 Karlsruhe, (Germany)

    2015-07-01

    Following the success of the 8. Edition of the Karlsruhe Nuclide Chart 2012, a new edition is planned for 2015. Since the 2012 edition, more than 100 nuclides have been discovered and about 1400 nuclides have been updated. In summary, the new 9. edition contains decay and radiation data on approximately 3230 ground state nuclides and 740 isomers from 118 chemical elements. The accompanying booklet provides a detailed explanation of the nuclide box structure used in the Chart. An expanded section contains many additional nuclide decay schemes to aid the user to interpret the highly condensed information in the nuclide boxes. The booklet contains - in addition to the latest values of the physical constants and physical properties - a periodic table of the elements, tables of new and updated nuclides, and a difference chart showing the main changes in the Chart graphically. (authors)

  2. Prescott’s Microbiology, Eighth Edition

    Dobbins, Joanne J.

    2010-01-01

    Review of: Prescott’s Microbiology, Eighth Edition. Joanne M. Willey, Linda M. Sherwood, and Christopher J. Woolverton. 2011. McGraw-Hill Higher Education, NewYork, NY. 1070 pages. ISBN- 978-0-07-337526-7.

  3. KWIC Index of nuclear codes (1975 edition)

    Akanuma, Makoto; Hirakawa, Takashi

    1976-01-01

    It is a KWIC Index for 254 nuclear codes in the Nuclear Code Abstracts (1975 edition). The classification of nuclear codes and the form of index are the same as those in the Computer Programme Library at Ispra, Italy. (auth.)

  4. Karlsruhe nuclide chart - new 9. edition 2015

    Soti, Zsolt; Magill, Joseph; Pfennig, Gerda; Derher, Raymond

    2015-01-01

    Following the success of the 8. Edition of the Karlsruhe Nuclide Chart 2012, a new edition is planned for 2015. Since the 2012 edition, more than 100 nuclides have been discovered and about 1400 nuclides have been updated. In summary, the new 9. edition contains decay and radiation data on approximately 3230 ground state nuclides and 740 isomers from 118 chemical elements. The accompanying booklet provides a detailed explanation of the nuclide box structure used in the Chart. An expanded section contains many additional nuclide decay schemes to aid the user to interpret the highly condensed information in the nuclide boxes. The booklet contains - in addition to the latest values of the physical constants and physical properties - a periodic table of the elements, tables of new and updated nuclides, and a difference chart showing the main changes in the Chart graphically. (authors)

  5. Introductory physics of nuclear medicine. Third edition

    Chandra, R.

    1987-01-01

    The new third edition includes essential details and many examples and problems taken from the routine practice of nuclear medicine. Basic principles and underlying concepts are explained, although it is assumed that the reader has some current use as a bone densitometer. For resident physicians in nuclear medicine, residents in pathology, radiology, and internal medicine, and students of nuclear medicine technology, the third edition offers a simplified and reliable approach to the physics and basic sciences of nuclear medicine

  6. Non-GMO genetically edited crop plants.

    Kanchiswamy, Chidananda Nagamangala; Malnoy, Mickael; Velasco, Riccardo; Kim, Jin-Soo; Viola, Roberto

    2015-09-01

    Direct delivery of purified Cas9 protein with guide RNA into plant cells, as opposed to plasmid-mediated delivery, displays high efficiency and reduced off-target effects. Following regeneration from edited cells, the ensuing plant is also likely to bypass genetically modified organism (GMO) legislation as the genome editing complex is degraded in the recipient cells. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Looking forward to genetically edited fruit crops.

    Nagamangala Kanchiswamy, Chidananda; Sargent, Daniel James; Velasco, Riccardo; Maffei, Massimo E; Malnoy, Mickael

    2015-02-01

    The availability of genome sequences for many fruit crops has redefined the boundaries of genetic engineering and genetically modified (GM) crop plants. However commercialization of GM crops is hindered by numerous regulatory and social hurdles. Here, we focus on recently developed genome-editing tools for fruit crop improvement and their importance from the consumer perspective. Challenges and opportunities for the deployment of new genome-editing tools for fruit plants are also discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Five Challenges for Intelligent Cinematography and Editing

    Ronfard , Rémi

    2017-01-01

    International audience; In this position paper, we propose five challenges for advancing the state of the art in intelligent cinematography and editing by taking advantage of the huge quantity of cinematographic data (movies) and metadata (movie scripts) available in digital formats. This suggests a data-driven approach to intelligent cinematography and editing, with at least five scientific bottlenecks that need to be carefully analyzed and resolved.we briefly describe them and suggest some ...

  9. Nuclear electronics laboratory manual 1989 edition

    1989-10-01

    This manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. It is based on the experience of conducting twenty-three training courses on nuclear electronics. Compared with the first edition, published 1984, this edition contains many new experiments, mainly on the advanced technical level. The total number of experiments and special projects is 58. Tabs and figs

  10. Calibrate the aerial surveying instrument by the limited surface source and the single point source that replace the unlimited surface source

    Lu Cunheng

    1999-01-01

    It is described that the calculating formula and surveying result is found on the basis of the stacking principle of gamma ray and the feature of hexagonal surface source when the limited surface source replaces the unlimited surface source to calibrate the aerial survey instrument on the ground, and that it is found in the light of the exchanged principle of the gamma ray when the single point source replaces the unlimited surface source to calibrate aerial surveying instrument in the air. Meanwhile through the theoretical analysis, the receiving rate of the crystal bottom and side surfaces is calculated when aerial surveying instrument receives gamma ray. The mathematical expression of the gamma ray decaying following height according to the Jinge function regularity is got. According to this regularity, the absorbing coefficient that air absorbs the gamma ray and the detective efficiency coefficient of the crystal is calculated based on the ground and air measuring value of the bottom surface receiving count rate (derived from total receiving count rate of the bottom and side surface). Finally, according to the measuring value, it is proved that imitating the change of total receiving gamma ray exposure rate of the bottom and side surfaces with this regularity in a certain high area is feasible

  11. Dramatic Advance in Quality in Flexographic Printing

    Jochen Richter

    2004-12-01

    Full Text Available The enormous changes in flexography printing in recent years concerning the printing quality achievable cannot generally be ascribed to a single revolutionary invention, but are the result of continuous developments to the complete system. Thus the direct drive technology in all machine types and its associated advantages in terms of printing length corrections has become established since drupa 2000. The race for ever finer raster rolls has also been completed to the benefit of improvements in bowl geometry and in ceramic surfaces. Clearly improved colour transfer behaviour has become feasible as a result. In a closely intermeshed system such as flexography printing this naturally has to have an effect on the printing colours used. Further improvements in bonding agents and pigment concentrations now allow users to print ever thinner colour layers while maintaining all of the required authenticities.Furthermore, it has become possible to reduce additional disturbing characteristics in the UV colour area, such as the unpleasant odour. While the digital imaging of printing plates has primarily been improved in terms of economic efficiency by the use of up to eight parallel laser beams, extreme improvements in the system are noticeable especially in the area of directly engraved printing moulds. Whereas many still dismissed directly engraved polymer plates at the last drupa as a laboratory system, the first installation was recently placed on the market a mere three years later. A further noteworthy innovation of recent years that has reached market maturity is thin sleeve technology, which combines the advantages of a photopolymer plate with a round imaged printing mould. There are no high sleeve costs for each printing mould, except for one-off cost for an adapter sleeve. To conclude, it can be said that although flexography printing has experienced many new features in the time between drupa 2000 and today, it still has enormous potential for

  12. The commercialization of genome-editing technologies.

    Brinegar, Katelyn; K Yetisen, Ali; Choi, Sun; Vallillo, Emily; Ruiz-Esparza, Guillermo U; Prabhakar, Anand M; Khademhosseini, Ali; Yun, Seok-Hyun

    2017-11-01

    The emergence of new gene-editing technologies is profoundly transforming human therapeutics, agriculture, and industrial biotechnology. Advances in clustered regularly interspaced short palindromic repeats (CRISPR) have created a fertile environment for mass-scale manufacturing of cost-effective products ranging from basic research to translational medicine. In our analyses, we evaluated the patent landscape of gene-editing technologies and found that in comparison to earlier gene-editing techniques, CRISPR has gained significant traction and this has established dominance. Although most of the gene-editing technologies originated from the industry, CRISPR has been pioneered by academic research institutions. The spinout of CRISPR biotechnology companies from academic institutions demonstrates a shift in entrepreneurship strategies that were previously led by the industry. These academic institutions, and their subsequent companies, are competing to generate comprehensive intellectual property portfolios to rapidly commercialize CRISPR products. Our analysis shows that the emergence of CRISPR has resulted in a fivefold increase in genome-editing bioenterprise investment over the last year. This entrepreneurial movement has spurred a global biotechnology revolution in the realization of novel gene-editing technologies. This global shift in bioenterprise will continue to grow as the demand for personalized medicine, genetically modified crops and environmentally sustainable biofuels increases. However, the monopolization of intellectual property, negative public perception of genetic engineering and ambiguous regulatory policies may limit the growth of these market segments.

  13. Software for Quantitative Estimation of Coefficients of Ink Transfer on the Printed Substrate in Offset Printing

    Varepo, L. G.; Trapeznikova, O. V.; Panichkin, A. V.; Roev, B. A.; Kulikov, G. B.

    2018-04-01

    In the framework of standardizing the process of offset printing, one of the most important tasks is the correct selection of the printing system components, taking into account the features of their interaction and behavior in the printing process. The program allows to calculate the transfer of ink on the printed material between the contacting cylindrical surfaces of the sheet-fed offset printing apparatus with the boundaries deformation. A distinctive feature of this software product is the modeling of the liquid flow having free boundaries and causing deformation of solid boundaries when flowing between the walls of two cylinders.

  14. Excimer UV curing in printing

    Mehnert, R.

    1999-01-01

    It is the aim of this study to investigate the potential of 308 run excimer UV curing in web and sheet fed offset printing and to discuss its present status. Using real-time FTIR-ATR and stationary or pulsed monochromatic (313 nm) irradiation chemical and physical factors affecting the curing speed of printing inks such as nature and concentration of photo-initiators, reactivity of the ink binding system, ink thickness and pigmentation, irradiance in the curing plane, oxygen concentration and nitrogen inerting, multiple pulse exposure, the photochemical dark reaction and temperature dependence were studied. The results were used to select optimum conditions for excimer UV curing in respect to ink reactivity, nitrogen inerting and UV exposure and to build an excimer UV curing unit consisting of two 50 W/cm 308 run excimer lamps, power supply, cooling and inerting unit. The excimer UV curing devices were tested under realistic conditions on a web offset press zirkon supra forte and a sheet fed press Heidelberg GTO 52. Maximum curing speeds of 300 m/min in web offset and 8000 sheets per hour in sheet fed offset were obtained

  15. Changes in the Printing Service

    2006-01-01

    The print servers at CERN are being replaced and all CERN printers will be gradually migrated to a new infrastructure. This will involve a few small changes for the users, which are highlighted in the following sections. Windows computers in the CERN domain (NICE XP/2000) The printer migration in the NICE environment is transparent and will be done automatically. The only significant change is that the 'CERN Printer Wizard'will be removed. To install a new printer and to monitor or manage its printing queue you should use the native windows interface, as explained at http://cern.ch/WinServices/Help/?kbid=070103 Linux SLC3, SLC4 The migration was transparent and has already been completed for Linux computers. If necessary, you can reconfigure your system again at any time by running the following command: /usr/bin/cern-config-printers -u The only significant change for Linux is the disappearance of the xprint command. Use the lpr command instead. Documentation for SLC3 is available at: h...

  16. Changes in the Printing Service

    2006-01-01

    The print servers at CERN are being replaced and all CERN printers will be gradually migrated to a new infrastructure. This will involve a few small changes for the users, which are highlighted in the following sections. Windows computers in the CERN domain (NICE XP/2000) The printer migration in the NICE environment is transparent and will be done automatically. The only significant change is that the 'CERN Printer Wizard' will be removed. To install a new printer and to monitor or manage its printing queue you should use the native windows interface, as explained at http://cern.ch/WinServices/Help/?kbid=070103 Linux SLC3, SLC4 The migration was transparent and has already been completed for Linux computers. If necessary, you can reconfigure your system again at any time by running the following command: /usr/bin/cern-config-printers -u The only significant change for Linux is the disappearance of the xprint command. Use the lpr command instead. Documentation for SLC3 is available at http://cern...

  17. 78 FR 22795 - EPAAR Clause for Printing

    2013-04-17

    ... printing/duplication. ``Desktop Publishing'' is a method of composition using computers with the final... considered ``printing.'' However, if the output from desktop publishing is being sent to a typesetting device... preparing related illustrative material to a final document (camera-ready copy) using desktop publishing. (2...

  18. Templated Dry Printing of Conductive Metal Nanoparticles

    Rolfe, David Alexander

    Printed electronics can lower the cost and increase the ubiquity of electrical components such as batteries, sensors, and telemetry systems. Unfortunately, the advance of printed electronics has been held back by the limited minimum resolution, aspect ratio, and feature fidelity of present printing techniques such as gravure, screen printing and inkjet printing. Templated dry printing offers a solution to these problems by patterning nanoparticle inks into templates before drying. This dissertation shows advancements in two varieties of templated dry nanoprinting. The first, advective micromolding in vapor-permeable templates (AMPT) is a microfluidic approach that uses evaporation-driven mold filling to create submicron features with a 1:1 aspect ratio. We will discuss submicron surface acoustic wave (SAW) resonators made through this process, and the refinement process in the template manufacturing process necessary to make these devices. We also present modeling techniques that can be applied to future AMPT templates. We conclude with a modified templated dry printing that improves throughput and isolated feature patterning by transferring dry-templated features with laser ablation. This method utilizes surface energy-defined templates to pattern features via doctor blade coating. Patterned and dried features can be transferred to a polymer substrate with an Nd:YAG MOPA fiber laser, and printed features can be smaller than the laser beam width.

  19. Embedding complex objects with 3d printing

    Hussain, Muhammad Mustafa; Diaz, Cordero Marlon Steven

    2017-01-01

    A CMOS technology-compatible fabrication process for flexible CMOS electronics embedded during additive manufacturing (i.e. 3D printing). A method for such a process may include printing a first portion of a 3D structure; pausing the step

  20. 3D Printing of Molecular Models

    Gardner, Adam; Olson, Arthur

    2016-01-01

    Physical molecular models have played a valuable role in our understanding of the invisible nano-scale world. We discuss 3D printing and its use in producing models of the molecules of life. Complex biomolecular models, produced from 3D printed parts, can demonstrate characteristics of molecular structure and function, such as viral self-assembly,…

  1. 3D printing of functional structures

    Krijnen, Gijsbertus J.M.

    The technology colloquial known as ‘3D printing’ has developed in such diversity in printing technologies and application fields that meanwhile it seems anything is possible. However, clearly the ideal 3D Printer, with high resolution, multi-material capability, fast printing, etc. is yet to be

  2. Inkjet Printed Radio Frequency Passive Components

    McKerricher, Garret

    2015-01-01

    -resonant frequencies around 1GHz. These fully printed devices have quality factors less than 10. Finally, 3D inkjet-printed UV-cured material is utilized with a novel silver organo-complex ink at 80oC providing conductivity of 1x107 S/m. A lumped element filter

  3. 3D Printed Block Copolymer Nanostructures

    Scalfani, Vincent F.; Turner, C. Heath; Rupar, Paul A.; Jenkins, Alexander H.; Bara, Jason E.

    2015-01-01

    The emergence of 3D printing has dramatically advanced the availability of tangible molecular and extended solid models. Interestingly, there are few nanostructure models available both commercially and through other do-it-yourself approaches such as 3D printing. This is unfortunate given the importance of nanotechnology in science today. In this…

  4. A Framework for 3d Printing

    Pilkington, Alan; Frandsen, Thomas; Kapetaniou, Chrystalla

    3D printing technologies and processes offer such a radical range of options for firms that we currently lack a structured way of recording possible impact and recommending actions for managers. The changes arising from 3d printing includes more than just new options for product design, but also...

  5. Medical 3D Printing for the Radiologist

    Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A.; Cai, Tianrun; Kumamaru, Kanako K.; George, Elizabeth; Wake, Nicole; Caterson, Edward J.; Pomahac, Bohdan; Ho, Vincent B.; Grant, Gerald T.

    2015-01-01

    While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. ©RSNA, 2015 PMID:26562233

  6. Advertising Content in Physical Activity Print Materials.

    Cardinal, Bradley J.

    2002-01-01

    Evaluated the advertising content contained in physical activity print materials. Analysis of print materials obtained from 80 sources (e.g., physicians' offices and fitness events) indicated that most materials contained some form of advertising. Materials coming from commercial product vendors generally contained more advertising than materials…

  7. Medical 3D Printing for the Radiologist.

    Mitsouras, Dimitris; Liacouras, Peter; Imanzadeh, Amir; Giannopoulos, Andreas A; Cai, Tianrun; Kumamaru, Kanako K; George, Elizabeth; Wake, Nicole; Caterson, Edward J; Pomahac, Bohdan; Ho, Vincent B; Grant, Gerald T; Rybicki, Frank J

    2015-01-01

    While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article. (©)RSNA, 2015.

  8. Digital Dentistry — 3D Printing Applications

    Zaharia Cristian

    2017-03-01

    Full Text Available Three-dimensional (3D printing is an additive manufacturing method in which a 3D item is formed by laying down successive layers of material. 3D printers are machines that produce representations of objects either planned with a CAD program or scanned with a 3D scanner. Printing is a method for replicating text and pictures, typically with ink on paper. We can print different dental pieces using different methods such as selective laser sintering (SLS, stereolithography, fused deposition modeling, and laminated object manufacturing. The materials are certified for printing individual impression trays, orthodontic models, gingiva mask, and different prosthetic objects. The material can reach a flexural strength of more than 80 MPa. 3D printing takes the effectiveness of digital projects to the production phase. Dental laboratories are able to produce crowns, bridges, stone models, and various orthodontic appliances by methods that combine oral scanning, 3D printing, and CAD/CAM design. Modern 3D printing has been used for the development of prototypes for several years, and it has begun to find its use in the world of manufacturing. Digital technology and 3D printing have significantly elevated the rate of success in dental implantology using custom surgical guides and improving the quality and accuracy of dental work.

  9. Luminous lip-prints as criminal evidence.

    Castelló, Ana; Alvarez-Seguí, Mercedes; Verdú, Fernando

    2005-12-20

    Luminescence is specially a useful property for the search of invisible evidences at the scene of a crime. In the latent fingerprints particular case, there are at one's disposal fluorescent reagents for their localization. The study of latent lip prints (that is lip prints from protective lipstick, or permanent or long-lasting lipstick that do not leave any visible marks) is more recent than fingerprints study. Because of the different composition of both types of prints, different reagents have been tried out on their developing. Although, lysochromes are particularly useful reagents to obtain latent lip prints, it may occur on coloured or multicoloured surfaces, the developing is not perceived due to contrast problems between the reagent and the surface where the print is searched. Again, luminescence offers the possibility to solve this problem. Nile Red is being studied as a potential developer for latent lip prints. The results on very old prints (over 1year) indicate that this reagent is highly efficient to get latent lip prints.

  10. Can lip prints provide biologic evidence?

    Sharma, Preeti; Sharma, Neeraj; Wadhwan, Vijay; Aggarwal, Pooja

    2016-01-01

    Lip prints are unique and can be used in personal identification. Very few studies are available which establish them as biological evidence in the court of law. Thus, the objective of this study was to attempt to isolate DNA and obtain full short tandem repeat (STR) loci of the individual from the lip prints on different surfaces. Twelve lip prints were procured on different surfaces such as tissue paper, cotton cloth, ceramic tile, and glass surface. Latent lip prints were developed using fingerprint black powder. Lipstick-coated lip prints were also collected on the same supporting items. DNA was isolated, quantified, and amplified using Identifiler™ kit to type 15 STR loci. Ample quantity of DNA was extracted from all the lip print impressions and 15 loci were successfully located in seven samples. Fourteen loci were successfully typed in 3 lip impressions while 13 loci were typed in 2 samples. This study emphasizes the relevance of lip prints at the scene of crime. Extraction of DNA followed by typing of STR loci establishes the lip prints as biological evidence too. Tissue papers, napkins, cups, and glasses may have imprints of the suspect's lips. Thus, the full genetic profile is extremely useful for the forensic team.

  11. Case Study on Printed Matter in Denmark

    Larsen, Henrik Fred

    2012-01-01

    The implementation of the EU REACH regulation will most probably promote substitution within sectors handling a lot of different chemicals such as the printing industry. With the aim of being at the cutting edge of this development, the Danish printing industry started up a substitution project....../impurities in globally recycled paper....

  12. Patterned electrodeposition of interconnects using microcontact printing

    Hovestad, A.; Rendering, H.; Maijenburg, A.W.

    2012-01-01

    Microcontact printing combined with electroless deposition is a potential low cost technique to make electrical interconnects for opto-electronic devices. Microcontact printed inhibitors locally prevent electroless deposition resulting in a pre-defined pattern of metal tracks. The inhibition of

  13. New literacies, multiple literacies, unlimited literacies: what now, what next, where to? A response to blue listerine, parochialism and ASL literacy.

    Paul, Peter V

    2006-01-01

    This article is a response to Blue Listerine, Parochialism, and ASL Literacy (Czubek, 2006). The author presents his views on the concepts of literacy and the new and multiple literacies. In addition, the merits of print literacy and other types of literacies are discussed. Although the author agrees that there is an American Sign Language (ASL) literacy, he maintains that there should be a distinction between conversational "literacy" forms (speech and sign) and secondary literacy forms (reading and writing). It might be that cognitive skills associated with print literacy and, possibly, other captured literacy forms, are necessary for a technological, scientific-driven society such as that which exists in the United States.

  14. Book Review: New Perspectives on Technical Editing

    Murphy, A. J. (Ed.); Sterken, Christiaan

    2012-08-01

    New Perspectives on Technical Editing by Avon J. Murphy (ed.) ISBN : 978-0895033949 (2010) Baywood Publishing Company Inc, Hardcover, 210 pages, 35.5 GBP This book presents a collection of 10 chapters dealing with diverse aspects of technical editing (ie, editorial planning, and analysis and structural changes made to other people's technological documents): research in technical editing, trends and teaching of technical editing, copyediting, and technical journal editing. The role and function of the modern journal and book editor is also dealt with in detail. Each chapter is written by an expert in the field: senior editors, university professors in technical communication, technical writers and linguists. The ever-evolving role of the editor is clearly elucidated in several historical reviews, and in the descriptions of the expectations for the future. A very striking aspect of this book is its extensive collection of bibliographic resources: every chapter lists dozens of very useful references, and the closing chapter, and annotated bibliography, contain many not so well known references, and are most useful. All in all, the book is a treasure trove listing more than 400 references, in addition to numerous webpage URLs embedded in the texts. The book is designed to help the reader to understand current practices and norms in technical editing, and to help to take action in editing as well as in teaching and educating would-be editors. The audience for this book thus includes editors and teachers, but also writers, researchers and students. A deep reading of this book will result in a better understanding of the difference between full technical editing and its much narrower component so well known as copyediting, and will convince any prospective editor that editing should not be undertaken if the people involved do not master the art of precision and accuracy in technical (as well as in human) communication, do not possess the technical know how and computer

  15. Digital Printing Quality Detection and Analysis Technology Based on CCD

    He, Ming; Zheng, Liping

    2017-12-01

    With the help of CCD digital printing quality detection and analysis technology, it can carry out rapid evaluation and objective detection of printing quality, and can play a certain control effect on printing quality. It can be said CDD digital printing quality testing and analysis of the rational application of technology, its digital printing and printing materials for a variety of printing equipments to improve the quality of a very positive role. In this paper, we do an in-depth study and discussion based on the CCD digital print quality testing and analysis technology.

  16. Designing Biomaterials for 3D Printing.

    Guvendiren, Murat; Molde, Joseph; Soares, Rosane M D; Kohn, Joachim

    2016-10-10

    Three-dimensional (3D) printing is becoming an increasingly common technique to fabricate scaffolds and devices for tissue engineering applications. This is due to the potential of 3D printing to provide patient-specific designs, high structural complexity, rapid on-demand fabrication at a low-cost. One of the major bottlenecks that limits the widespread acceptance of 3D printing in biomanufacturing is the lack of diversity in "biomaterial inks". Printability of a biomaterial is determined by the printing technique. Although a wide range of biomaterial inks including polymers, ceramics, hydrogels and composites have been developed, the field is still struggling with processing of these materials into self-supporting devices with tunable mechanics, degradation, and bioactivity. This review aims to highlight the past and recent advances in biomaterial ink development and design considerations moving forward. A brief overview of 3D printing technologies focusing on ink design parameters is also included.

  17. Initial letters on the pages of Ukrainian old printed books of the 17th-18th centuries

    Yukhymets H. M.

    2017-01-01

    Full Text Available The article is devoted to such a complicated and little studied element of artistic decoration of Ukrainian printed books of the 17th-18th centuries as capital letters. The authors research old printed books from the collection of imprints of the Kyiv-Pechersk Lavra’s typography. Various topics, iconography, compositional and artistic stylistic features of miniature illustrations of initial letters, their location on book pages, content correspondence or discrepancy with a text, usage of one clichй in various editions provide multiple new possibilities to researchers. Especially the authors accentuate iconography of gospel and life subjects, as well as the source studies analysis of initial letters, which in Ukrainian old printed editions of Baroque epoch impress with innovation of subject development and the ambition for original decisions of complex compositional tasks conditioned not only by the size and format of an initial, but also by the form and location of the letter itself in a certain decorative space.

  18. EDITAR: a module for reaction rate editing and cross-section averaging within the AUS neutronics code system

    Robinson, G.S.

    1986-03-01

    The EDITAR module of the AUS neutronics code system edits one and two-dimensional flux data pools produced by other AUS modules to form reaction rates for materials and their constituent nuclides, and to average cross sections over space and energy. The module includes a Bsub(L) flux calculation for application to cell leakage. The STATUS data pool of the AUS system is used to enable the 'unsmearing' of fluxes and nuclide editing with minimal user input. The module distinguishes between neutron and photon groups, and printed reaction rates are formed accordingly. Bilinear weighting may be used to obtain material reactivity worths and to average cross sections. Bilinear weighting is at present restricted to diffusion theory leakage estimates made using mesh-average fluxes

  19. Re-editing the paradigm of Cytidine (C) to Uridine (U) RNA editing.

    Fossat, Nicolas; Tam, Patrick P L

    2014-01-01

    Cytidine (C) to Uridine (U) RNA editing is a post-trancriptional modification that until recently was known to only affect Apolipoprotein b (Apob) RNA and minimally require 2 components of the C to U editosome, the deaminase APOBEC1 and the RNA-binding protein A1CF. Our latest work has identified a novel RNA-binding protein, RBM47, as a core component of the editosome, which can substitute A1CF for the editing of ApoB mRNA. In addition, new RNA species that are subjected to C to U editing have been identified. Here, we highlight these recent discoveries and discuss how they change our view of the composition of the C to U editing machinery and expand our knowledge of the functional attributes of C to U RNA editing.

  20. BOOK REVIEW: Quantum Gravity: third edition Quantum Gravity: third edition

    Rovelli, Carlo

    2012-09-01

    The request by Classical and Quantum Gravity to review the third edition of Claus Kiefer's 'Quantum Gravity' puts me in a slightly awkward position. This is a remarkably good book, which every person working in quantum gravity should have on the shelf. But in my opinion quantum gravity has undergone some dramatic advances in the last few years, of which the book makes no mention. Perhaps the omission only attests to the current vitality of the field, where progress is happening fast, but it is strange for me to review a thoughtful, knowledgeable and comprehensive book on my own field of research, which ignores what I myself consider the most interesting results to date. Kiefer's book is unique as a broad introduction and a reliable overview of quantum gravity. There are numerous books in the field which (often notwithstanding titles) focus on a single approach. There are also countless conference proceedings and article collections aiming to be encyclopaedic, but offering disorganized patchworks. Kiefer's book is a careful and thoughtful presentation of all aspects of the immense problem of quantum gravity. Kiefer is very learned, and brings together three rare qualities: he is pedagogical, he is capable of simplifying matter to the bones and capturing the essential, and he offers a serious and balanced evaluation of views and ideas. In a fractured field based on a major problem that does not yet have a solution, these qualities are precious. I recommend Kiefer's book to my students entering the field: to work in quantum gravity one needs a vast amount of technical knowledge as well as a grasp of different ideas, and Kiefer's book offers this with remarkable clarity. This novel third edition simplifies and improves the presentation of several topics, but also adds very valuable new material on quantum gravity phenomenology, loop quantum cosmology, asymptotic safety, Horava-Lifshitz gravity, analogue gravity, the holographic principle, and more. This is a testament

  1. Printing Technologies for Medical Applications.

    Shafiee, Ashkan; Atala, Anthony

    2016-03-01

    Over the past 15 years, printers have been increasingly utilized for biomedical applications in various areas of medicine and tissue engineering. This review discusses the current and future applications of 3D bioprinting. Several 3D printing tools with broad applications from surgical planning to 3D models are being created, such as liver replicas and intermediate splints. Numerous researchers are exploring this technique to pattern cells or fabricate several different tissues and organs, such as blood vessels or cardiac patches. Current investigations in bioprinting applications are yielding further advances. As one of the fastest areas of industry expansion, 3D additive manufacturing will change techniques across biomedical applications, from research and testing models to surgical planning, device manufacturing, and tissue or organ replacement. Copyright © 2016. Published by Elsevier Ltd.

  2. New Literacies, Multiple Literacies, Unlimited Literacies: What Now, What Next, Where to? A Response to "Blue Listerine, Parochialism and ASL Literacy"

    Paul, Peter V.

    2006-01-01

    This article is a response to "Blue Listerine, Parochialism, and ASL Literacy" (Czubek, 2006). The author presents his views on the concepts of literacy and the new and multiple literacies. In addition, the merits of print literacy and other types of literacies are discussed. Although the author agrees that there is an American Sign…

  3. Mediated Plastid RNA Editing in Plant Immunity

    García-Andrade, Javier; Ramírez, Vicente; López, Ana; Vera, Pablo

    2013-01-01

    Plant regulatory circuits coordinating nuclear and plastid gene expression have evolved in response to external stimuli. RNA editing is one of such control mechanisms. We determined the Arabidopsis nuclear-encoded homeodomain-containing protein OCP3 is incorporated into the chloroplast, and contributes to control over the extent of ndhB transcript editing. ndhB encodes the B subunit of the chloroplast NADH dehydrogenase-like complex (NDH) involved in cyclic electron flow (CEF) around photosystem I. In ocp3 mutant strains, ndhB editing efficiency decays, CEF is impaired and disease resistance to fungal pathogens substantially enhanced, a process recapitulated in plants defective in editing plastid RNAs encoding NDH complex subunits due to mutations in previously described nuclear-encoded pentatricopeptide-related proteins (i.e. CRR21, CRR2). Furthermore, we observed that following a pathogenic challenge, wild type plants respond with editing inhibition of ndhB transcript. In parallel, rapid destabilization of the plastidial NDH complex is also observed in the plant following perception of a pathogenic cue. Therefore, NDH complex activity and plant immunity appear as interlinked processes. PMID:24204264

  4. 3D printed replicas for endodontic education.

    Reymus, M; Fotiadou, C; Kessler, A; Heck, K; Hickel, R; Diegritz, C

    2018-06-14

    To assess the feasibility of producing artificial teeth for endodontic training using 3D printing technology, to analyse the accuracy of the printing process, and to evaluate the teeth by students when used during training. Sound extracted human teeth were selected, digitalized by cone beam computed tomography (CBCT) and appropriate software and finally reproduced by a stereolithographic printer. The printed teeth were scanned and compared with the original ones (trueness) and to one another (precision). Undergraduate dental students in the third and fourth years performed root canal treatment on printed molars and were subsequently asked to evaluate their experience with these compared to real teeth. The workflow was feasible for manufacturing 3D printed tooth replicas. The absolute deviation after printing (trueness) ranged from 50.9μm to 104.3μm. The values for precision ranged from 43.5μm to 68.2μm. Students reported great benefits in the use of the replicated teeth for training purposes. The presented workflow is feasible for any dental educational institution who has access to a CBCT unit and a stereolithographic printer. The accuracy of the printing process is suitable for the production of tooth replicas for endodontic training. Undergraduate students favoured the availability of these replicas and the fairness they ensured in training due to standardization. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  5. Printing of Wearable Antenna on Textile

    Khirotdin Rd. Khairilhijra

    2018-01-01

    Full Text Available A wearable antenna which is meant to be a part of the clothing used for communication purposes includes tracking, navigation and mobile computing has been seen in demand due to the recent miniaturization of wireless devices. Printing of conductive ink provides flexibility properties on electronics thus allowing it to be used on conformal surfaces. However, the current printing techniques mostly suffer from ink incompatibility and limited of substrates to be printed with. Hence, this paper intend to discloses the printing of wearable antenna using alternative technique via syringe-based deposition system with conductive ink on textile. A validation between simulation and measurement of return loss, (S11 and radiation pattern of the antenna printed is also performed. It was found that a functional antenna is successfully printed on textile since the performances obtained are as expected. The antenna resonated at a minimum resonant frequency of 1.82 GHz which the S11 gathered at-18.90 dB. The radiation pattern for both simulation and measurement is as predicted since both have a larger magnitude of the main lobe than the side lobe. The magnitude of the main lobe from measurement was observed to be 8.83 dB higher than the magnitude of the main lobe of the simulation which is only 3.77 dB. It is proven that the syringe-based deposition system is capable of printing functional antenna on textile.

  6. 3D Printing of Ball Grid Arrays

    Sinha, Shayandev; Hines, Daniel; Dasgupta, Abhijit; Das, Siddhartha

    Ball grid arrays (BGA) are interconnects between an integrated circuit (IC) and a printed circuit board (PCB), that are used for surface mounting electronic components. Typically, lead free alloys are used to make solder balls which, after a reflow process, establish a mechanical and electrical connection between the IC and the PCB. High temperature processing is required for most of these alloys leading to thermal shock causing damage to ICs. For producing flexible circuits on a polymer substrate, there is a requirement for low temperature processing capabilities (around 150 C) and for reducing strain from mechanical stresses. Additive manufacturing techniques can provide an alternative methodology for fabricating BGAs as a direct replacement for standard solder bumped BGAs. We have developed aerosol jet (AJ) printing methods to fabricate a polymer bumped BGA. As a demonstration of the process developed, a daisy chain test chip was polymer bumped using an AJ printed ultra violet (UV) curable polymer ink that was then coated with an AJ printed silver nanoparticle laden ink as a conducting layer printed over the polymer bump. The structure for the balls were achieved by printing the polymer ink using a specific toolpath coupled with in-situ UV curing of the polymer which provided good control over the shape, resulting in well-formed spherical bumps on the order of 200 um wide by 200 um tall for this initial demonstration. A detailed discussion of the AJ printing method and results from accelerated life-time testing will be presented

  7. Advances and Future Challenges in Printed Batteries.

    Sousa, Ricardo E; Costa, Carlos M; Lanceros-Méndez, Senentxu

    2015-11-01

    There is an increasing interest in thin and flexible energy storage devices to meet modern society's needs for applications such as radio frequency sensing, interactive packaging, and other consumer products. Printed batteries comply with these requirements and are an excellent alternative to conventional batteries for many applications. Flexible and microbatteries are also included in the area of printed batteries when fabricated using printing technologies. The main characteristics, advantages, disadvantages, developments, and printing techniques of printed batteries are presented and discussed in this Review. The state-of-the-art takes into account both the research and industrial levels. On the academic level, the research progress of printed batteries is divided into lithium-ion and Zn-manganese dioxide batteries and other battery types, with emphasis on the different materials for anode, cathode, and separator as well as in the battery design. With respect to the industrial state-of-the-art, materials, device formulations, and manufacturing techniques are presented. Finally, the prospects and challenges of printed batteries are discussed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Dimensional accuracy of 3D printed vertebra

    Ogden, Kent; Ordway, Nathaniel; Diallo, Dalanda; Tillapaugh-Fay, Gwen; Aslan, Can

    2014-03-01

    3D printer applications in the biomedical sciences and medical imaging are expanding and will have an increasing impact on the practice of medicine. Orthopedic and reconstructive surgery has been an obvious area for development of 3D printer applications as the segmentation of bony anatomy to generate printable models is relatively straightforward. There are important issues that should be addressed when using 3D printed models for applications that may affect patient care; in particular the dimensional accuracy of the printed parts needs to be high to avoid poor decisions being made prior to surgery or therapeutic procedures. In this work, the dimensional accuracy of 3D printed vertebral bodies derived from CT data for a cadaver spine is compared with direct measurements on the ex-vivo vertebra and with measurements made on the 3D rendered vertebra using commercial 3D image processing software. The vertebra was printed on a consumer grade 3D printer using an additive print process using PLA (polylactic acid) filament. Measurements were made for 15 different anatomic features of the vertebral body, including vertebral body height, endplate width and depth, pedicle height and width, and spinal canal width and depth, among others. It is shown that for the segmentation and printing process used, the results of measurements made on the 3D printed vertebral body are substantially the same as those produced by direct measurement on the vertebra and measurements made on the 3D rendered vertebra.

  9. Printing and civilization; Insatsu to bunmei

    Takahashi, T. [Dainippon Ink and Chemicals Inc., Tokyo (Japan)

    1995-01-01

    It can be said that the printing has not been only a barometer of culture, but also has formed a foundation of culture as the facilities of civilization, and has shouldered a role to drag the culture. In modern nation, that the freedom of speech and press has been clearly pointed out as the fundamental human right, shows straightforwardly an important significance of such a printing. Though it is also statistically clear that there is an exact relation between GNP and printed materials per capita, in this paper centering around the examples in Japan, a relation between the printing and civilization/culture is introduced like the episodes. It does not yet become definite that what kind of influence a proposition so called `printing is a barometer of culture` is affected by the information/communication revolution which is regarded to be advanced very rapidly. However, speaking conclusively it can not be thought that a demand for the printing which can produce the information in a great deal of quantity with a low cost, and for the printing which does not need special output terminal and is excellent in portability and glance ability, may largely be reduced. 1 fig.

  10. BOOK REVIEW: The Complete A-Z Physics Handbook, Second Edition

    Breithaupt, Jim

    2000-11-01

    The first edition of this book was published in 1997 and reviewed in Physics Education in March 1988. This second edition is 13 pages longer and contains a significant number of new entries, mostly in particle physics and astrophysics, to match the latest AS/A-level specifications. Some entries on topics such as surface tension that were removed from previous AS/A-level syllabuses have now been deleted. The revised book thus provides an effective alphabetical guide to key terms used in the latest AS/A-level specifications as most AS/A-level core terms are included, apart from terms for some of the new topics such as image processing in the new IOP AS/A-level specification. The style of the second edition is the same as the first, each entry commencing with the key term in bold print followed by an explanation of the term, accompanied by the relevant equation and/or a simple diagram where appropriate. Cross-references are given in italics. For example, the entry under quarks (which is one of the new entries) lists the six quarks and their characteristic properties in bullet point format then follows up with the information about the quark composition of baryons and mesons, giving the composition of the proton, the neutron and the pions as examples. The change of quark composition due to beta decay is mentioned with a cross-reference to beta decay. Other cross-references link to entries on the proton, the neutron and the four fundamental interactions. Lengthy entries such as the photoelectric effect each cover several pages, thus providing opportunities for in-depth revision. Useful theme entries provided in the first edition have been retained and referred to in a new two-page appendix on preparing for synoptic questions. Some proofs are provided such as the proof of the kinetic theory equation. Some experiments are described, each under an appropriate entry. Technically, the entries are reasonably accurate and usually expressed in appropriate and familiar language

  11. Three-dimensional Printing in Developing Countries.

    Ibrahim, Ahmed M S; Jose, Rod R; Rabie, Amr N; Gerstle, Theodore L; Lee, Bernard T; Lin, Samuel J

    2015-07-01

    The advent of 3-dimensional (3D) printing technology has facilitated the creation of customized objects. The lack of regulation in developing countries renders conventional means of addressing various healthcare issues challenging. 3D printing may provide a venue for addressing many of these concerns in an inexpensive and easily accessible fashion. These may potentially include the production of basic medical supplies, vaccination beads, laboratory equipment, and prosthetic limbs. As this technology continues to improve and prices are reduced, 3D printing has the potential ability to promote initiatives across the entire developing world, resulting in improved surgical care and providing a higher quality of healthcare to its residents.

  12. 3D printed magnetic polymer composite transformers

    Bollig, Lindsey M.; Hilpisch, Peter J.; Mowry, Greg S.; Nelson-Cheeseman, Brittany B.

    2017-11-01

    The possibility of 3D printing a transformer core using fused deposition modeling methods is explored. With the use of additive manufacturing, ideal transformer core geometries can be achieved in order to produce a more efficient transformer. In this work, different 3D printed settings and toroidal geometries are tested using a custom integrated magnetic circuit capable of measuring the hysteresis loop of a transformer. These different properties are then characterized, and it was determined the most effective 3D printed transformer core requires a high fill factor along with a high concentration of magnetic particulate.

  13. Print vs digital the future of coexistence

    Lee, Sul H

    2013-01-01

    Libraries are currently confronted by the challenges of managing increasing amounts of electronic information. Print vs. Digital: The Future of Coexistence presents the expert perspectives of eight of America's leading library administrators on ways to effectively manage digital flow and offers strategies to provide a level of coexistence between digital and print information. This excellent overview explores how to best balance print and electronic resources, and explores important issues such as the selection of electronic resources, improving access to digital information for a larger user

  14. Printed Barium Strontium Titanate capacitors on silicon

    Sette, Daniele [Univ. Grenoble Alpes, F-38000 Grenoble (France); CEA, LETI, MINATEC Campus, F-38054 Grenoble (France); Luxembourg Institute of Science and Technology LIST, Materials Research and Technology Department, L-4422 Belvaux (Luxembourg); Kovacova, Veronika [Univ. Grenoble Alpes, F-38000 Grenoble (France); CEA, LETI, MINATEC Campus, F-38054 Grenoble (France); Defay, Emmanuel, E-mail: emmanuel.defay@list.lu [Univ. Grenoble Alpes, F-38000 Grenoble (France); CEA, LETI, MINATEC Campus, F-38054 Grenoble (France); Luxembourg Institute of Science and Technology LIST, Materials Research and Technology Department, L-4422 Belvaux (Luxembourg)

    2015-08-31

    In this paper, we show that Barium Strontium Titanate (BST) films can be prepared by inkjet printing of sol–gel precursors on platinized silicon substrate. Moreover, a functional variable capacitor working in the GHz range has been made without any lithography or etching steps. Finally, this technology requires 40 times less precursors than the standard sol–gel spin-coating technique. - Highlights: • Inkjet printing of Barium Strontium Titanate films • Deposition on silicon substrate • Inkjet printed silver top electrode • First ever BST films thinner than 1 μm RF functional variable capacitor that has required no lithography.

  15. Topography printing to locally control wettability.

    Zheng, Zijian; Azzaroni, Omar; Zhou, Feng; Huck, Wilhelm T S

    2006-06-21

    This paper reports a new patterning method, which utilizes NaOH to facilitate the irreversible binding between the PDMS stamp and substrates and subsequent cohesive mechanical failure to transfer the PDMS patterns. Our method shows high substrate tolerance and can be used to "print" various PDMS geometries on a wide range of surfaces, including Si100, glass, gold, polymers, and patterned SU8 photoresist. Using this technique, we are able to locally change the wettability of substrate surfaces by printing well-defined PDMS architectures on the patterned SU8 photoresist. It is possible to generate differential wetting and dewetting properties in microchannels and in the PDMS printed area, respectively.

  16. Introduction to nuclear science, second edition

    Bryan, Jeff C.

    2013-01-01

    This book was written to provide students who have limited backgrounds in the physical sciences and math with an accessible textbook on nuclear science. Expanding on the foundation of the bestselling first edition, Introduction to Nuclear Science, Second Edition provides a clear and complete introduction to nuclear chemistry and physics, from basic concepts to nuclear power and medical applications. Incorporating suggestions from professors using this book for their courses, the author has created a new text that is approximately 60 percent larger and more comprehensive and flexible than the first.New to This Edition: Thorough review of nuclear forensics, radiology, gamma cameras, and decay through proton or neutron emission More detailed explanations of the necessary mathematics A chapter on dosimetry of radiation fields Expanded discussion of applications, introduced earlier in the text More in-depth coverage of nuclear reactors, including a new chapter examining more reactor types, their safety systems,...

  17. Abundant off-target edits from site-directed RNA editing can be reduced by nuclear localization of the editing enzyme.

    Vallecillo-Viejo, Isabel C; Liscovitch-Brauer, Noa; Montiel-Gonzalez, Maria Fernanda; Eisenberg, Eli; Rosenthal, Joshua J C

    2018-01-02

    Site-directed RNA editing (SDRE) is a general strategy for making targeted base changes in RNA molecules. Although the approach is relatively new, several groups, including our own, have been working on its development. The basic strategy has been to couple the catalytic domain of an adenosine (A) to inosine (I) RNA editing enzyme to a guide RNA that is used for targeting. Although highly efficient on-target editing has been reported, off-target events have not been rigorously quantified. In this report we target premature termination codons (PTCs) in messages encoding both a fluorescent reporter protein and the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein transiently transfected into human epithelial cells. We demonstrate that while on-target editing is efficient, off-target editing is extensive, both within the targeted message and across the entire transcriptome of the transfected cells. By redirecting the editing enzymes from the cytoplasm to the nucleus, off-target editing is reduced without compromising the on-target editing efficiency. The addition of the E488Q mutation to the editing enzymes, a common strategy for increasing on-target editing efficiency, causes a tremendous increase in off-target editing. These results underscore the need to reduce promiscuity in current approaches to SDRE.

  18. Printing Insecurity? The Security Implications of 3D-Printing of Weapons.

    Walther, Gerald

    2015-12-01

    In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the U.S. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing technology and 3D guns. It argues that current arms control and transfer policies are adequate to cover 3D-printed guns as well. However, while this analysis may hold up currently, progress in printing technology needs to be monitored to deal with future dangers pre-emptively.

  19. A high speed electrohydrodynamic (EHD) jet printing method for line printing

    Phung, Thanh Huy; Kim, Seora; Kwon, Kye-Si

    2017-01-01

    Electrohydrodynamic (EHD) jet printing has drawn attention due to its capability to produce smaller dots and patterns with finer lines when compared to those obtained from using conventional inkjet printing. Previous studies have suggested that drop-on-demand EHD-patterning applications should be limited to very slow printing cases with speeds far less than 10 mm s −1 due to the small dot size and limited jetting frequency. In this study, a new EHD printing method is proposed to significantly increase the line-patterning printing speed by modifying the ink and thereby changing the relic shape. The proposed method has the additional advantage of reducing the line-pattern width. The results of the experiment show that the pattern width could be reduced from 20 µ m to 4 µ m by increasing the printing speed from 10 mm s −1 to 50 mm s −1 , respectively. (paper)

  20. 48 CFR 1631.205-78 - FEHBP printed material costs.

    2010-10-01

    ... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true FEHBP printed material... carrier orders printed material that is available from the Government Printing Office (GPO) under the... COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 1631.205-78 FEHBP printed...

  1. Ultrafast Digital Printing toward 4D Shape Changing Materials.

    Huang, Limei; Jiang, Ruiqi; Wu, Jingjun; Song, Jizhou; Bai, Hao; Li, Bogeng; Zhao, Qian; Xie, Tao

    2017-02-01

    Ultrafast 4D printing (printing converts the structure into 3D. An additional dimension can be incorporated by choosing the printing precursors. The process overcomes the speed limiting steps of typical 3D (4D) printing. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Virtual printer : an environment for digital print modeling and inspection

    Marchenko, V.

    2014-01-01

    Océ-Technologies B.V., a member of the Canon Group, specializes in providing solutions for enterprise printing, large format printing, and production printing. Software is an important part of a modern printer. One of the tasks for inkjet-printer software is to transform input print data into timed

  3. 40 CFR 63.824 - Standards: Publication rotogravure printing.

    2010-07-01

    ... (CONTINUED) National Emission Standards for the Printing and Publishing Industry § 63.824 Standards: Publication rotogravure printing. (a) Each owner or operator of any publication rotogravure printing affected... printing. 63.824 Section 63.824 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR...

  4. Global Bathymetry: Machine Learning for Data Editing

    Sandwell, D. T.; Tea, B.; Freund, Y.

    2017-12-01

    The accuracy of global bathymetry depends primarily on the coverage and accuracy of the sounding data and secondarily on the depth predicted from gravity. A main focus of our research is to add newly-available data to the global compilation. Most data sources have 1-12% of erroneous soundings caused by a wide array of blunders and measurement errors. Over the years we have hand-edited this data using undergraduate employees at UCSD (440 million soundings at 500 m resolution). We are developing a machine learning approach to refine the flagging of the older soundings and provide automated editing of newly-acquired soundings. The approach has three main steps: 1) Combine the sounding data with additional information that may inform the machine learning algorithm. The additional parameters include: depth predicted from gravity; distance to the nearest sounding from other cruises; seafloor age; spreading rate; sediment thickness; and vertical gravity gradient. 2) Use available edit decisions as training data sets for a boosted tree algorithm with a binary logistic objective function and L2 regularization. Initial results with poor quality single beam soundings show that the automated algorithm matches the hand-edited data 89% of the time. The results show that most of the information for detecting outliers comes from predicted depth with secondary contributions from distance to the nearest sounding and longitude. A similar analysis using very high quality multibeam data shows that the automated algorithm matches the hand-edited data 93% of the time. Again, most of the information for detecting outliers comes from predicted depth secondary contributions from distance to the nearest sounding and longitude. 3) The third step in the process is to use the machine learning parameters, derived from the training data, to edit 12 million newly acquired single beam sounding data provided by the National Geospatial-Intelligence Agency. The output of the learning algorithm will be

  5. Transportation Energy Data Book, Edition 19

    Davis, S.C.

    1999-09-01

    The Transportation Energy Data Book: Edition 19 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Transportation Technologies in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest editions of the Data Book are available to a larger audience via the Internet (http://www-cta.ornl.gov/data/tedb.htm).

  6. Transportation Energy Data Book, Edition 19; TOPICAL

    Davis, S.C.

    1999-01-01

    The Transportation Energy Data Book: Edition 19 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Transportation Technologies in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. The latest editions of the Data Book are available to a larger audience via the Internet (http://www-cta.ornl.gov/data/tedb.htm)

  7. The art of editing RNA structural alignments

    Andersen, Ebbe Sloth

    2014-01-01

    Manual editing of RNA structural alignments may be considered more art than science, since it still requires an expert biologist to take multiple levels of information into account and be slightly creative when constructing high-quality alignments. Even though the task is rather tedious, it is re......Manual editing of RNA structural alignments may be considered more art than science, since it still requires an expert biologist to take multiple levels of information into account and be slightly creative when constructing high-quality alignments. Even though the task is rather tedious...

  8. Genome Editing in Human Pluripotent Stem Cells.

    Carlson-Stevermer, Jared; Saha, Krishanu

    2017-01-01

    Genome editing in human pluripotent stem cells (hPSCs) enables the generation of reporter lines and knockout cell lines. Zinc finger nucleases, transcription activator-like effector nucleases (TALENs), and CRISPR/Cas9 technology have recently increased the efficiency of proper gene editing by creating double strand breaks (DSB) at defined sequences in the human genome. These systems typically use plasmids to transiently transcribe nucleases within the cell. Here, we describe the process for preparing hPSCs for transient expression of nucleases via electroporation and subsequent analysis to create genetically modified stem cell lines.

  9. Sub anno domini 1465... In casa de’ figliuoli di Aldo. Origin and advancements of the printing press in Italy through the exemplars of the Bagnacavallo ‘Giuseppe Taroni’ library

    Federica Fabbri

    2016-11-01

    Full Text Available The paper contains the descriptions of the ancient books owned by the Public Library ‘Giuseppe Taroni’ in Bagnacavallo, which were selected for the exhibition Sub anno domini 1465... In casa de’ figliuoli di Aldo to celebrate the printing of the first book in Italy by Konrad Sweynheym and Arnold Pannartz with datation included in the colophon (Subiaco, 1465 and the fifth centenary of Aldus Manutius’ death, the major Italian printer and publisher of the Renaissance age (1449-52?-1515. Among the exhibited copies the one belonging to the Roman edition of 1470 of the work of the Christian scholar Lactantius, the only one copy printed by Sweynheym and Pannartz owned by the Library in Bagnacavallo, and a selection of books printed by Aldus Manutius and his heirs, among which the only copy found in this library of a book printed by Aldus The Elder, belonging to Institutiones Grammaticae of 1514.

  10. Dispenser printed electroluminescent lamps on textiles for smart fabric applications

    de Vos, Marc; Torah, Russel; Tudor, John

    2016-04-01

    Flexible electroluminescent (EL) lamps are fabricated onto woven textiles using a novel dispenser printing process. Dispenser printing utilizes pressurized air to deposit ink onto a substrate through a syringe and nozzle. This work demonstrates the first use of this technology to fabricate EL lamps. The luminance of the dispenser printed EL lamps is compared to screen-printed EL lamps, both printed on textile, and also commercial EL lamps on polyurethane film. The dispenser printed lamps are shown to have a 1.5 times higher luminance than the best performing commercially available lamp, and have a comparable performance to the screen-printed lamps.

  11. Uniformity of fully gravure printed organic field-effect transistors

    Hambsch, M.; Reuter, K.; Stanel, M.; Schmidt, G.; Kempa, H.; Fuegmann, U.; Hahn, U.; Huebler, A.C.

    2010-01-01

    Fully mass-printed organic field-effect transistors were made completely by means of gravure printing. Therefore a special printing layout was developed in order to avoid register problems in print direction. Upon using this layout, contact pads for source-drain electrodes of the transistors are printed together with the gate electrodes in one and the same printing run. More than 50,000 transistors have been produced and by random tests a yield of approximately 75% has been determined. The principle suitability of the gravure printed transistors for integrated circuits has been shown by the realization of ring oscillators.

  12. Dispenser printed electroluminescent lamps on textiles for smart fabric applications

    De Vos, Marc; Torah, Russel; Tudor, John

    2016-01-01

    Flexible electroluminescent (EL) lamps are fabricated onto woven textiles using a novel dispenser printing process. Dispenser printing utilizes pressurized air to deposit ink onto a substrate through a syringe and nozzle. This work demonstrates the first use of this technology to fabricate EL lamps. The luminance of the dispenser printed EL lamps is compared to screen-printed EL lamps, both printed on textile, and also commercial EL lamps on polyurethane film. The dispenser printed lamps are shown to have a 1.5 times higher luminance than the best performing commercially available lamp, and have a comparable performance to the screen-printed lamps. (paper)

  13. Genes (including RNA editing information) - RMG | LSDB Archive [Life Science Database Archive metadata

    Full Text Available t tested T: transcribed N: not transcribed Editing site Editing site N: not transcribed Previous reports on ...editing sites Previous reports on editing sites Strand Strand S: sense A: antisense exon1 start Start positi

  14. 3D Printing of Biosamples: A Concise Review

    Zhao, Victoria Xin Ting; Wong, Ten It; Zhou, Xiaodong

    This paper reviews the recent development of 3D printing of biosamples, in terms of the 3D structure design, suitable printing technology, and available materials. Successfully printed 3D biosamples should possess the properties of high cell viability, vascularization and good biocompatibility. These goals are attained by printing the materials of hydrogels, polymers and cells, with a carefully selected 3D printer from the categories of inkjet printing, extrusion printing and laser printing, based on the uniqueness, advantages and disadvantages of these technologies. For recent developments, we introduce the 3D applications of creating scaffolds, printing cells for self-assembly and testing platforms. We foresee more bio-applications of 3D printing will be developed, with the advancements on materials and 3D printing machines.

  15. The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints

    Coakley, Meghan F.; Hurt, Darrell E.; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C.; Alekseyev, Vsevelod; Chen, David T.; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S.; Huyen, Yentram

    2014-01-01

    The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print ...

  16. Printing Insecurity? The Security Implications of 3D-Printing of Weapons

    Walther, Gerald

    2014-01-01

    In 2013, the first gun printed out of plastic by a 3D-printer was successfully fired in the US. This event caused a major media hype about the dangers of being able to print a gun. Law enforcement agencies worldwide were concerned about this development and the potentially huge security implications of these functional plastic guns. As a result, politicians called for a ban of these weapons and a control of 3D-printing technology. This paper reviews the security implications of 3D-printing te...

  17. The NIH 3D Print Exchange: A Public Resource for Bioscientific and Biomedical 3D Prints.

    Coakley, Meghan F; Hurt, Darrell E; Weber, Nick; Mtingwa, Makazi; Fincher, Erin C; Alekseyev, Vsevelod; Chen, David T; Yun, Alvin; Gizaw, Metasebia; Swan, Jeremy; Yoo, Terry S; Huyen, Yentram

    2014-09-01

    The National Institutes of Health (NIH) has launched the NIH 3D Print Exchange, an online portal for discovering and creating bioscientifically relevant 3D models suitable for 3D printing, to provide both researchers and educators with a trusted source to discover accurate and informative models. There are a number of online resources for 3D prints, but there is a paucity of scientific models, and the expertise required to generate and validate such models remains a barrier. The NIH 3D Print Exchange fills this gap by providing novel, web-based tools that empower users with the ability to create ready-to-print 3D files from molecular structure data, microscopy image stacks, and computed tomography scan data. The NIH 3D Print Exchange facilitates open data sharing in a community-driven environment, and also includes various interactive features, as well as information and tutorials on 3D modeling software. As the first government-sponsored website dedicated to 3D printing, the NIH 3D Print Exchange is an important step forward to bringing 3D printing to the mainstream for scientific research and education.

  18. Influence of printing speed on production of embossing tools using FDM 3D printing technology

    Jelena Žarko

    2017-06-01

    Full Text Available Manufacturing of the embossing tools customary implies use of metals such as zinc, magnesium, copper, and brass. In the case of short run lengths, a conventional manufacturing process and the material itself represent a significant cost, not only in the terms of material costs and the need for using complex technological systems which are necessary for their production, but also in the terms of the production time. Alternatively, 3D printing can be used for manufacturing similar embossing tools with major savings in production time and costs. However, due to properties of materials used in the 3D printing technology, expected results of embossing by 3D printed tools cannot be identical to metal ones. This problem is emphasized in the case of long run lengths and high accuracy requirement for embossed elements. The objective of this paper is primarily focused on investigating the influence of the printing speed on reproduction quality of the embossing tools printed with FDM (Fused Deposition Modelling technology. The obtained results confirmed that printing speed as a process parameter affects the reproduction quality of the embossing tools printed with FDM technology: in the case of deposition rate of 90 mm/s was noted the poorest dimensional accuracy in relation to the 3D model, which is more emphasised in case of circular and square elements. Elements printed with the highest printing speed have a greater dimensional accuracy, but with evident cracks on the surface.

  19. Direct Visual Editing of Node Attributes in Graphs

    Christian Eichner

    2016-10-01

    Full Text Available There are many expressive visualization techniques for analyzing graphs. Yet, there is only little research on how existing visual representations can be employed to support data editing. An increasingly relevant task when working with graphs is the editing of node attributes. We propose an integrated visualize-and-edit approach to editing attribute values via direct interaction with the visual representation. The visualize part is based on node-link diagrams paired with attribute-dependent layouts. The edit part is as easy as moving nodes via drag-and-drop gestures. We present dedicated interaction techniques for editing quantitative as well as qualitative attribute data values. The benefit of our novel integrated approach is that one can directly edit the data while the visualization constantly provides feedback on the implications of the data modifications. Preliminary user feedback indicates that our integrated approach can be a useful complement to standard non-visual editing via external tools.

  20. Application of image editing software for forensic detection of image ...

    Application of image editing software for forensic detection of image. ... The image editing software's available today is apt for creating visually compelling and sophisticated fake images, ... EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  1. RNA Editing and Drug Discovery for Cancer Therapy

    Wei-Hsuan Huang

    2013-01-01

    Full Text Available RNA editing is vital to provide the RNA and protein complexity to regulate the gene expression. Correct RNA editing maintains the cell function and organism development. Imbalance of the RNA editing machinery may lead to diseases and cancers. Recently, RNA editing has been recognized as a target for drug discovery although few studies targeting RNA editing for disease and cancer therapy were reported in the field of natural products. Therefore, RNA editing may be a potential target for therapeutic natural products. In this review, we provide a literature overview of the biological functions of RNA editing on gene expression, diseases, cancers, and drugs. The bioinformatics resources of RNA editing were also summarized.

  2. Experimental Stochatics (2nd edition)

    Wiberg, P

    2004-01-01

    for teachers of computational stochastic methods, is the main contribution of this electronic monograph. However, both the book and software suffer from several severe problems. Firstly, I feel that the structure of the text is weak. Probably this is partly the result of the text from the CD-ROM being put into a book format, but the short paragraphs and poorly structured sentences destroy the reading experience. Secondly, although the software is functional, I believe that, like me, many users will be disappointed by the quality of the user interface and the visualizations. The opportunities to interact with the simulations are limited. Thirdly, the presentation is slightly old fashioned and lacking in pedagogical structure. For example, flow charts and Pascal programs are used to present algorithms. To conclude, I am surprised that this electronic monograph warranted a second edition in this form. Teachers may find the examples useful as a starting point, but students and researchers are advised to look elsewhere. (book review)

  3. Substitution within the Danish printing industry

    Larsen, Henrik Fred; Bøg, Carsten

    2009-01-01

    are running a substitution project. A major part of the work has been mapping the presence of chemicals which are potential candidates for substitution (e.g. PBT, CMR, vPvB, EDS) within the Danish printing industry and this work was recently finished. The mapping comprises a combination of a literature study......The implementation of the EU REACH regulation will most probably promote substitution within sectors handling a lot of different chemicals like the printing industry. With the aim of being at the cutting edge of this development the Danish EPA together with the Danish printing industry and IPU...... total 15 substances) were found in the Danish printing industry. This paper presents the results of the mapping of chemical candidates and the first results on preparing for actual substitutions....

  4. Towards microscale electrohydrodynamic three-dimensional printing

    He, Jiankang; Xu, Fangyuan; Cao, Yi; Liu, Yaxiong; Li, Dichen

    2016-01-01

    It is challenging for the existing three-dimensional (3D) printing techniques to fabricate high-resolution 3D microstructures with low costs and high efficiency. In this work we present a solvent-based electrohydrodynamic 3D printing technique that allows fabrication of microscale structures like single walls, crossed walls, lattice and concentric circles. Process parameters were optimized to deposit tiny 3D patterns with a wall width smaller than 10 μm and a high aspect ratio of about 60. Tight bonding among neighbour layers could be achieved with a smooth lateral surface. In comparison with the existing microscale 3D printing techniques, the presented method is low-cost, highly efficient and applicable to multiple polymers. It is envisioned that this simple microscale 3D printing strategy might provide an alternative and innovative way for application in MEMS, biosensor and flexible electronics. (paper)

  5. EU Design Law and 3D Printing

    Nordberg, Ana; Schovsbo, Jens Hemmingsen

    2017-01-01

    The article considers the implications for EU design law of 3D-printing. It first describes the 3D-printing technology and the e-ecosystem which is evolving around the technology and involves a number of new stakeholders who in different ways are engaged in the making and sharing of CAD-files and....../or printing. It is submitted that it is only a matter of time before 3D-printing equipment becomes ubiquitous. It is pointed out how the new technology and e-ecosystem at the same time represent threats and opportunities to design holders and to the societal interests in design and design law. EU design law...

  6. 3D Printed Multimaterial Microfluidic Valve.

    Steven J Keating

    Full Text Available We present a novel 3D printed multimaterial microfluidic proportional valve. The microfluidic valve is a fundamental primitive that enables the development of programmable, automated devices for controlling fluids in a precise manner. We discuss valve characterization results, as well as exploratory design variations in channel width, membrane thickness, and membrane stiffness. Compared to previous single material 3D printed valves that are stiff, these printed valves constrain fluidic deformation spatially, through combinations of stiff and flexible materials, to enable intricate geometries in an actuated, functionally graded device. Research presented marks a shift towards 3D printing multi-property programmable fluidic devices in a single step, in which integrated multimaterial valves can be used to control complex fluidic reactions for a variety of applications, including DNA assembly and analysis, continuous sampling and sensing, and soft robotics.

  7. Cibachrome testing. [photographic processing and printing materials

    Weinstein, M. S.

    1974-01-01

    The use of Cibachrome products as a solution to problems encountered when contact printing Kodak film type SO-397 onto Kodak Ektrachrome color reversal paper type 1993 is investigated. A roll of aerial imagery consisting of Kodak film types SO-397 and 2443 was contact printed onto Cibachrome and Kodak materials and compared in terms of color quality, resolution, cost, and compatibility with existing equipment and techniques. Objective measurements are given in terms of resolution and sensitometric response. Comparison prints and transparencies were viewed and ranked according to overall quality and aesthetic appeal. It is recommended that Cibachrome Print material be used in place of Kodak Ektachrome paper because it is more easily processed, the cost is equivalent, and it provides improved resolution, color quality, and image fade resistance.

  8. Predicting transmittance spectra of electrophotographic color prints

    Mourad, Safer; Emmel, Patrick; Hersch, Roger D.

    2000-12-01

    For dry toner electrophotographic color printers, we present a numerical simulation model describing the color printer responses based on a physical characterization of the different electrophotographic process steps. The proposed model introduces a Cross Transfer Efficiency designed to predict the color transmittance spectra of multi-color prints by taking into account the transfer influence of each deposited color toner layer upon the other layers. The simulation model leads to a better understanding of the factors that have an impact on printing quality. In order to avoid the additional optical non-linearities produced by light reflection on paper, we have limited the present investigation to transparency prints. The proposed model succeeded to predict the transmittance spectra of printed wedges combining two color toner layers with a mean deviation less than CIE-LAB (Delta) E equals 2.5.

  9. 48 CFR 952.208-70 - Printing.

    2010-10-01

    ... SOLICITATION PROVISIONS AND CONTRACT CLAUSES Text of Provisions and Clauses 952.208-70 Printing. As prescribed... reproduction in excess of the limits set forth above, the Contractor shall notify the Contracting Officer in...

  10. Print-Assisted Photovoltaic Assembly (PAPA)

    National Aeronautics and Space Administration — This proposal describes the development of an innovative method for the fabrication of thin-film photovoltaic panels. Print-Assisted Photovoltaic Assembly, or PAPA,...

  11. Towards microscale electrohydrodynamic three-dimensional printing

    He, Jiankang; Xu, Fangyuan; Cao, Yi; Liu, Yaxiong; Li, Dichen

    2016-02-01

    It is challenging for the existing three-dimensional (3D) printing techniques to fabricate high-resolution 3D microstructures with low costs and high efficiency. In this work we present a solvent-based electrohydrodynamic 3D printing technique that allows fabrication of microscale structures like single walls, crossed walls, lattice and concentric circles. Process parameters were optimized to deposit tiny 3D patterns with a wall width smaller than 10 μm and a high aspect ratio of about 60. Tight bonding among neighbour layers could be achieved with a smooth lateral surface. In comparison with the existing microscale 3D printing techniques, the presented method is low-cost, highly efficient and applicable to multiple polymers. It is envisioned that this simple microscale 3D printing strategy might provide an alternative and innovative way for application in MEMS, biosensor and flexible electronics.

  12. 3D-printed Bioanalytical Devices

    Bishop, Gregory W; Satterwhite-Warden, Jennifer E; Kadimisetty, Karteek; Rusling, James F

    2016-01-01

    While 3D printing technologies first appeared in the 1980s, prohibitive costs, limited materials, and the relatively small number of commercially available printers confined applications mainly to prototyping for manufacturing purposes. As technologies, printer cost, materials, and accessibility continue to improve, 3D printing has found widespread implementation in research and development in many disciplines due to ease-of-use and relatively fast design-to-object workflow. Several 3D printing techniques have been used to prepare devices such as milli- and microfluidic flow cells for analyses of cells and biomolecules as well as interfaces that enable bioanalytical measurements using cellphones. This review focuses on preparation and applications of 3D-printed bioanalytical devices. PMID:27250897

  13. Monitoring Information By Industry - Printing and Publishing

    Stationary source emissions monitoring is required to demonstrate that a source is meeting the requirements in Federal or state rules. This page is about control techniques used to reduce pollutant emissions in the printing and publishing industry.

  14. Recent development in 3D food printing.

    Yang, Fan; Zhang, Min; Bhandari, Bhesh

    2017-09-22

    Robots and software have been significantly improving our daily lives by rendering us much convenience. And 3D printing is a typical example, for it is going to usher in a new era of localized manufacturing that is actually based on digital fabrication by layer-by-layer deposition in three-dimensional space. In terms of food industry, the revolution that three-dimensional printing technologies is bringing to food manufacturing is convenience of low-cost customized fabrication and even precise nutrition control. This paper is aimed to give a brief introduction of recent development of food printing and material property of food ingredients that can be used to design the 3D food matrix and investigate the relationship between process parameters and resulting printed food properties in order to establish a food manufacturing process with this new food production approach.

  15. Network printing in a heterogenous environment

    Beyer, C.; Schroth, G.

    2001-01-01

    Mail and printing are often said to be the most visible services for the user in the network. Though many people talked about the paperless bureau a few years ago it seems that the more digital data is accessible, the more it gets printed. Print management in a heterogenous network environments is typically crossing all operating systems. Each of those brings its own requirements and different printing system implementations with individual user interfaces. The scope is to give the user the advantage and features of the native interface of their operating system while making administration tasks as easy as possible by following the general ideas of a centralised network service on the server side

  16. Printing and Publishing Industry Training Board

    Industrial Training International, 1974

    1974-01-01

    Accounted is the supervisory training program currently in operation in the printing and publishing industry. The purpose of the training program is to increase managerial efficiency and to better prepare new supervisors. (DS)

  17. Editörden Veda

    Serpil Salaçin

    2000-04-01

    ştirenler. Kendine göre oıtak düşünce ve yürek ürünü olan dergiyi asılsız ve haksız yorumlayanlar. Ama tüm zorlukların üstesinden gelindiğini düşünüyorum. Bu nedenle benim kişisel olarak baştan beri üstlenmeyi düşündüğüm görevimin tamamlandığını düşünüyorum. Aşağıda bir kaç gün önce derneğimiz başkanlığına gönderdiğim görevden affım ile ilgili mektubu bu derneğin üyeleri olarak sizlerin de öğrenmeye hakkınız olduğunu düşünerek sizlerle paylaşmak istiyorum. Adli Tıp Uzmanları Derneği Başkanlığına, Sayın Prof. Dr. Gürsel Çetin, 26.03.2001 Derneğimizin kuruluşundan bu yana meslektaşlarımızın özverileri ile üretilenlere katkıda bulunmak hepimiz için görev olarak algılanıp yerine getirilmeye çalışıldı. Bu etkinlikler içinde bu alanın bilimsel üretimlerini paylaşabileceği, danışmanlı olarak çalışabilecek bir derginin oluşturulması fikri de derneğimizin bir etkinliğinde sizin de bildiğiniz koşullarda ortaya atıldı. Benimsendi. Bu üretimin gerçekleştirilmesinde görev verilenlerden de biri de bendim. Çıkarılacak derginin editörlük görevini bana vermiştiniz. Bana duyulan güvene ve verilmiş olan bu göreve teşekkür ediyorum. Adli Tıp Bülteni, ismi ile eldeki sınırlı olanaklarla rengi, kapağı, amblemi, formatı ile bir grup özverili arkadaşımızla birlikte doğdu. (ISSN 1300-865X kaydını aldı. Ben bu görevi bir meslek misyonu olarak gerçekleştirmeye çalıştım. Ulusal ve uluslar arası danışma kurulunun oluşturulmasında edindiğim uluslararası ilişkileri devreye sokarak bu kurulların zenginleştirilmesine çalıştım. Birlikte çalıştığımız arkadaşlarımızın her birinin özverileri ile dergi yazım kuralları, gelen makalelerin kaydı, danışmanlara gönderilmesi, danışman ve yazar arasındaki yazışmaların gerçekleştirilmesi, her sayının içeriği ve makale dışı yazı düzenlemeleri, sîzlerin de yakından bildiği bir

  18. Banner prints social security numbers

    Robbins RA

    2014-02-01

    Full Text Available No abstract available. Article truncated at 150 words. The Monday edition of the Arizona Republic contained a story with potential interest to our readers. On the most recent address labels of Banner Health's magazine, Smart & Healthy, the addressee's Social Security or Medicare identification numbers, which are often identical to their Social Security numbers (1. The magazine was mailed to more than 50,000 recipients in Arizona late last week. The recipients are members of the Medicare Pioneer Accountable Care Organization, a government health-care plan that Banner serves. Banner generated its mailing list from information it received from the U.S. Centers for Medicare & Medicaid Services, which is an agency within the U.S. Department of Health & Human Services (HHS responsible for administration of several federal health-care programs. Although medical information has been protected by the Health Insurance Portability and Accountability Act (HIPAA since 1996, penalties were recently increased. Civil monetary penalties were increased from a maximum of $100 ...

  19. Contextual advertisement placement in printed media

    Liu, Sam; Joshi, Parag

    2010-02-01

    Advertisements today provide the necessary revenue model supporting the WWW ecosystem. Targeted or contextual ad insertion plays an important role in optimizing the financial return of this model. Nearly all the current ads that appear on web sites are geared for display purposes such as banner and "pay-per-click". Little attention, however, is focused on deriving additional ad revenues when the content is repurposed for alternative mean of presentation, e.g. being printed. Although more and more content is moving to the Web, there are still many occasions where printed output of web content is desirable, such as maps and articles; thus printed ad insertion can potentially be lucrative. In this paper, we describe a contextual ad insertion network aimed to realize new revenue for print service providers for web printing. We introduce a cloud print service that enables contextual ads insertion, with respect to the main web page content, when a printout of the page is requested. To encourage service utilization, it would provide higher quality printouts than what is possible from current browser print drivers, which generally produce poor outputs, e.g. ill formatted pages. At this juncture we will limit the scope to only article-related web pages although the concept can be extended to arbitrary web pages. The key components of this system include (1) the extraction of article from web pages, (2) the extraction of semantics from article, (3) querying the ad database for matching advertisement or coupon, and (4) joint content and ad layout for print outputs.

  20. 3D printed e-tongue

    Gaál, Gabriel; da Silva, Tatiana A.; Gaál, Vladimir; Hensel, Rafael C.; Amaral, Lucas R.; Rodrigues, Varlei; Riul, Antonio

    2018-05-01

    Nowadays, one of the biggest issues addressed to electronic sensor fabrication is the build-up of efficient electrodes as an alternative way to the expensive, complex and multistage processes required by traditional techniques. Printed electronics arises as an interesting alternative to fulfill this task due to the simplicity and speed to stamp electrodes on various surfaces. Within this context, the Fused Deposition Modeling 3D printing is an emerging, cost-effective and alternative technology to fabricate complex structures that potentiates several fields with more creative ideas and new materials for a rapid prototyping of devices. We show here the fabrication of interdigitated electrodes using a standard home-made CoreXY 3D printer using transparent and graphene-based PLA filaments. Macro 3D printed electrodes were easily assembled within 6 minutes with outstanding reproducibility. The electrodes were also functionalized with different nanostructured thin films via dip-coating Layer-by-Layer technique to develop a 3D printed e-tongue setup. As a proof of concept, the printed e-tongue was applied to soil analysis. A control soil sample was enriched with several macro-nutrients to the plants (N, P, K, S, Mg and Ca) and the discrimination was done by electrical impedance spectroscopy of water solution of the soil samples. The data was analyzed by Principal Component Analysis and the 3D printed sensor distinguished clearly all enriched samples despite the complexity of the soil chemical composition. The 3D printed e-tongue successfully used in soil analysis encourages further investments in developing new sensory tools for precision agriculture and other fields exploiting the simplicity and flexibility offered by the 3D printing techniques.

  1. Three-Dimensional Printing in Zero Gravity

    Werkheiser, Niki

    2015-01-01

    The 3D printing in zero-g (3D Print) technology demonstration project is a proof-of-concept test designed to assess the properties of melt deposition modeling additive manufacturing in the microgravity environment experienced on the International Space Station (ISS). This demonstration is the first step towards realizing a 'machine shop' in space, a critical enabling component of any deep space mission.

  2. 3D freeform printing of silk fibroin.

    Rodriguez, Maria J; Dixon, Thomas A; Cohen, Eliad; Huang, Wenwen; Omenetto, Fiorenzo G; Kaplan, David L

    2018-04-15

    Freeform fabrication has emerged as a key direction in printing biologically-relevant materials and structures. With this emerging technology, complex structures with microscale resolution can be created in arbitrary geometries and without the limitations found in traditional bottom-up or top-down additive manufacturing methods. Recent advances in freeform printing have used the physical properties of microparticle-based granular gels as a medium for the submerged extrusion of bioinks. However, most of these techniques require post-processing or crosslinking for the removal of the printed structures (Miller et al., 2015; Jin et al., 2016) [1,2]. In this communication, we introduce a novel method for the one-step gelation of silk fibroin within a suspension of synthetic nanoclay (Laponite) and polyethylene glycol (PEG). Silk fibroin has been used as a biopolymer for bioprinting in several contexts, but chemical or enzymatic additives or bulking agents are needed to stabilize 3D structures. Our method requires no post-processing of printed structures and allows for in situ physical crosslinking of pure aqueous silk fibroin into arbitrary geometries produced through freeform 3D printing. 3D bioprinting has emerged as a technology that can produce biologically relevant structures in defined geometries with microscale resolution. Techniques for fabrication of free-standing structures by printing into granular gel media has been demonstrated previously, however, these methods require crosslinking agents and post-processing steps on printed structures. Our method utilizes one-step gelation of silk fibroin within a suspension of synthetic nanoclay (Laponite), with no need for additional crosslinking compounds or post processing of the material. This new method allows for in situ physical crosslinking of pure aqueous silk fibroin into defined geometries produced through freeform 3D printing. Copyright © 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights

  3. Applications of 3D printing in healthcare

    Dodziuk, Helena

    2016-01-01

    3D printing is a relatively new, rapidly expanding method of manufacturing that found numerous applications in healthcare, automotive, aerospace and defense industries and in many other areas. In this review, applications in medicine that are revolutionizing the way surgeries are carried out, disrupting prosthesis and implant markets as well as dentistry will be presented. The relatively new field of bioprinting, that is printing with cells, will also be briefly discussed.

  4. Applications of 3D printing in healthcare.

    Dodziuk, Helena

    2016-09-01

    3D printing is a relatively new, rapidly expanding method of manufacturing that found numerous applications in healthcare, automotive, aerospace and defense industries and in many other areas. In this review, applications in medicine that are revolutionizing the way surgeries are carried out, disrupting prosthesis and implant markets as well as dentistry will be presented. The relatively new field of bioprinting, that is printing with cells, will also be briefly discussed.

  5. CORROSION ANALYSIS OF METALLIZED FILMS AFTER PRINTING

    Mr. Dhirender*1, Mr. Rajeev2 & Mr.Manoj3

    2017-01-01

    Print quality has always been a point of strong concern among printers and consumers. Metalized films have gain a wide spread popularity among printers because of its low cost and high usages in food packaging applications. But sometimes corrosion spoils the printed products causing huge financial loss to the printers or customers.This paper throws light on major causes of corrosion on metallized films and possible remedies for the same. The metallized films with polyester base were base coat...

  6. Three-Dimensional Printing Surgical Applications.

    AlAli, Ahmad B; Griffin, Michelle F; Butler, Peter E

    2015-01-01

    Three-dimensional printing, a technology used for decades in the industrial field, gains a lot of attention in the medical field for its potential benefits. With advancement of desktop printers, this technology is accessible and a lot of research is going on in the medical field. To evaluate its application in surgical field, which may include but not limited to surgical planning, surgical education, implants, and prosthesis, which are the focus of this review. Research was conducted by searching PubMed, Web of science, and other reliable sources. We included original articles and excluded articles based on animals, those more than 10 years old, and those not in English. These articles were evaluated, and relevant studies were included in this review. Three-dimensional printing shows a potential benefit in surgical application. Printed implants were used in patient in a few cases and show successful results; however, longer follow-up and more trials are needed. Surgical and medical education is believed to be more efficient with this technology than the current practice. Printed surgical instrument and surgical planning are also believed to improve with three-dimensional printing. Three-dimensional printing can be a very powerful tool in the near future, which can aid the medical field that is facing a lot of challenges and obstacles. However, despite the reported results, further research on larger samples and analytical measurements should be conducted to ensure this technology's impact on the practice.

  7. Endodontic applications of 3D printing.

    Anderson, J; Wealleans, J; Ray, J

    2018-02-27

    Computer-aided design (CAD) and computer-aided manufacturing (CAM) technologies can leverage cone beam computed tomography data for production of objects used in surgical and nonsurgical endodontics and in educational settings. The aim of this article was to review all current applications of 3D printing in endodontics and to speculate upon future directions for research and clinical use within the specialty. A literature search of PubMed, Ovid and Scopus was conducted using the following terms: stereolithography, 3D printing, computer aided rapid prototyping, surgical guide, guided endodontic surgery, guided endodontic access, additive manufacturing, rapid prototyping, autotransplantation rapid prototyping, CAD, CAM. Inclusion criteria were articles in the English language documenting endodontic applications of 3D printing. Fifty-one articles met inclusion criteria and were utilized. The endodontic literature on 3D printing is generally limited to case reports and pre-clinical studies. Documented solutions to endodontic challenges include: guided access with pulp canal obliteration, applications in autotransplantation, pre-surgical planning and educational modelling and accurate location of osteotomy perforation sites. Acquisition of technical expertise and equipment within endodontic practices present formidable obstacles to widespread deployment within the endodontic specialty. As knowledge advances, endodontic postgraduate programmes should consider implementing 3D printing into their curriculums. Future research directions should include clinical outcomes assessments of treatments employing 3D printed objects. Published 2018. This article is a U.S. Government work and is in the public domain in the USA.

  8. Printing in heterogeneous computer environment at DESY

    Jakubowski, Z.

    1996-01-01

    The number of registered hosts DESY reaches 3500 while the number of print queues approaches 150. The spectrum of used computing environment is very wide: from MAC's and PC's, through SUN, DEC and SGI machines to the IBM mainframe. In 1994 we used 18 tons of paper. We present a solution for providing print services in such an environment for more than 3500 registered users. The availability of the print service is a serious issue. Using centralized printing has a lot of advantages for software administration but creates single point of failure. We solved this problem partially without using expensive software and hardware. The talk provides information about the DESY central central print spooler concept. None of the systems available on the market provides ready to use reliable solution for all platforms used for DESY. We discuss concepts for installation, administration and monitoring large number of printers. We found a solution for printing both on central computing facilities likewise for support of stand-alone workstations. (author)

  9. Printing of Titanium implant prototype

    Wiria, Florencia Edith; Shyan, John Yong Ming; Lim, Poon Nian; Wen, Francis Goh Chung; Yeo, Jin Fei; Cao, Tong

    2010-01-01

    Dental implant plays an important role as a conduit of force and stress to flow from the tooth to the related bone. In the load sharing between an implant and its related bone, the amount of stress carried by each of them directly related to their stiffness or modulus. Hence, it is a crucial issue for the implant to have matching mechanical properties, in particular modulus, between the implant and its related bone. Titanium is a metallic material that has good biocompatibility and corrosion resistance. Whilst the modulus of the bulk material is still higher than that of bone, it is the lowest among all other commonly used metallic implant materials, such as stainless steel or cobalt alloy. Hence it is potential to further reduce the modulus of pure Titanium by engineering its processing method to obtain porous structure. In this project, porous Titanium implant prototype is fabricated using 3-dimensional printing. This technique allows the flexibility of design customization, which is beneficial for implant fabrication as tailoring of implant size and shape helps to ensure the implant would fit nicely to the patient. The fabricated Titanium prototype had a modulus of 4.8-13.2 GPa, which is in the range of natural bone modulus. The compressive strength achieved was between 167 to 455 MPa. Subsequent cell culture study indicated that the porous Titanium prototype had good biocompatibility and is suitable for bone cell attachment and proliferation.

  10. Collaboration, editing, transparency: challenges and possibilities of a “wikification” of journalism

    Carlos d'Andréa

    2009-06-01

    Full Text Available This article discusses the possibilities and challenges of the incorporation of wikis in journalistic editorial offices, especially in the processes involving the drafting and editing of texts. The reflection takes into consideration a context marked by 1 continuous fragmented publication of information; 2 simplification and horizontal organization of journalistic routines, which directly impacts the figure of the editor (mainly in the media on the web; and 3 increasing public participation in the development of the news, with the mediation of professionals. “Wiki-journalism” practices on the Wikinews and Wikipedia sites and initiatives originating with print publications are presented and discussed, and based on them we distinguish two models, which differ in the degree of control of the process by the journalists.

  11. COLLABORATION, EDITING, TRANSPARENCY: Challenges and possibilities of a “wikification” of journalism

    Carlos d'Andréa

    2011-02-01

    Full Text Available This article discusses the possibilities and challenges of the
    incorporation of wikis in journalistic editorial offices, especially
    in the processes involving the drafting and editing of texts.
    The reflection takes into consideration a context marked by 1
    continuous fragmented publication of information; 2 simplification
    and horizontal organization of journalistic routines, which directly
    impacts the figure of the editor (mainly in the media on the web; and 3 increasing public participation in the development of the news, with the mediation of professionals. “Wiki-journalism” practices on the Wikinews and Wikipedia sites and initiatives originating with print publications are presented and discussed, and based on them we distinguish two models, which differ in the degree of control of the process by the journalists.

  12. Human Resources Administration: A School-Based Perspective. Fourth Edition

    Smith, Richard

    2009-01-01

    Enhanced and updated, this Fourth Edition of Richard E. Smith's highly successful text examines the growing role of the principal in planning, hiring, staff development, supervision, and other human resource functions. The Fourth Edition includes new sections on ethics, induction, and the role of the mentor teacher. This edition also introduces…

  13. Soil Carbon Sequestration and the Greenhouse Effect (2nd Edition)

    This volume is a second edition of the book “Soil Carbon Sequestration and The Greenhouse Effect”. The first edition was published in 2001 as SSSA Special Publ. #57. The present edition is an update of the concepts, processes, properties, practices and the supporting data. All chapters are new co...

  14. Editing Bosman's stories | MacKenzie | Current Writing: Text and ...

    This article looks back at the editing work that went into the fourteen-volume Anniversary Edition of Herman Charles Bosman (1998–2005) and pays particular attention to the editing of Bosman's stories. It examines some of the problems that were encountered in arriving at 'authoritative' versions of the stories and argues ...

  15. Human germline gene editing: Recommendations of ESHG and ESHRE

    de Wert, Guido; Pennings, Guido; Clarke, Angus; Eichenlaub-Ritter, Ursula; van El, Carla G.; Forzano, Francesca; Goddijn, Mariëtte; Heindryckx, Björn; Howard, Heidi C.; Radojkovic, Dragica; Rial-Sebbag, Emmanuelle; Tarlatzis, Basil C.; Cornel, Martina C.

    2018-01-01

    Technological developments in gene editing raise high expectations for clinical applications, first of all for somatic gene editing but in theory also for germline gene editing (GLGE). GLGE is currently not allowed in many countries. This makes clinical applications in these countries impossible

  16. Regression Analysis by Example. 5th Edition

    Chatterjee, Samprit; Hadi, Ali S.

    2012-01-01

    Regression analysis is a conceptually simple method for investigating relationships among variables. Carrying out a successful application of regression analysis, however, requires a balance of theoretical results, empirical rules, and subjective judgment. "Regression Analysis by Example, Fifth Edition" has been expanded and thoroughly…

  17. Collecting and Interpreting Qualitative Materials. Third Edition

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book is the third volume of the paperback versions of "The SAGE Handbook of Qualitative Research, Third Edition." This portion of the handbook considers the tasks of collecting, analyzing, and interpreting empirical materials, and comprises the Handbook's Parts IV ("Methods of Collecting and Analyzing Empirical Materials") and V ("The Art and…

  18. The Landscape of Qualitative Research. Third Edition

    Denzin, Norman K., Ed.; Lincoln, Yvonna, Ed.

    2007-01-01

    This book, the first volume of the paperback versions of the "The SAGE Handbook of Qualitative Research, Third Edition," takes a look at the field from a broadly theoretical perspective, and is composed of the Handbook's Parts I ("Locating the Field"), II ("Major Paradigms and Perspectives"), and VI ("The Future of Qualitative Research"). "The…

  19. Handbook of Qualitative Research. Second Edition.

    Denzin, Norman K., Ed.; Lincoln, Yvonna S., Ed.

    This handbook's second edition represents the state of the art for the theory and practice of qualitative inquiry. It features eight new topics, including autoethnography, critical race theory, applied ethnography, queer theory, and "testimonio"every chapter in the handbook has been thoroughly revised and updated. The book…

  20. A Model for Flexibly Editing CSCL Scripts

    Sobreira, Pericles; Tchounikine, Pierre

    2012-01-01

    This article presents a model whose primary concern and design rationale is to offer users (teachers) with basic ICT skills an intuitive, easy, and flexible way of editing scripts. The proposal is based on relating an end-user representation as a table and a machine model as a tree. The table-tree model introduces structural expressiveness and…

  1. Power Technologies Data Book 2003 Edition

    Aabakken, J.

    2004-06-01

    The 2003 edition of this report, prepared by NREL's Energy Analysis Office, includes up-to-date information on power technologies, including complete technology profiles. The data book also contains charts on electricity restructuring, power technology forecasts and comparisons, electricity supply, electricity capability, electricity generation, electricity demand, prices, economic indicators, environmental indicators, conversion factors, and selected congressional questions and answers.

  2. Health Activities Project (HAP), Trial Edition II.

    Buller, Dave; And Others

    Contained within this Health Activities Project (HAP) trial edition (set II) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into a Synopsis, Health Background, Materials, Setting Up, and Activities…

  3. Health Activities Project (HAP), Trial Edition III.

    Buller, Dave; And Others

    Contained within this Health Activities Project (HAP) trial edition (set III) are a teacher information folio and numerous student activity folios which center around the idea that students in grades 5-8 can control their own health and safety. Each student folio is organized into an Overview, Health Background, Materials, Setting Up, and…

  4. Introduction to Energy - 2nd Edition

    Cassedy, Edward S.; Grossman, Peter Z.

    1998-12-01

    Energy issues such as pollution, resource depletion, global warming, nuclear power and waste are problems that demand timely solutions. This book provides a critical examination of the resources, market forces, and social impacts of modern energy production. The book addresses the dilemmas that have arisen due to society's crucial dependence on energy, particularly fossil fuels, and explores the available alternative energy producing technologies. The second edition has increased emphasis on those issues at the forefront of the current energy debate: energy sustainability, climate change, and the radical restructuring of the power industry due to de-regulation. Assuming no prior technical expertise and avoiding complex mathematical formulation, it is directed at a broad readership. The second edition will follow the first in proving especially useful as a textbook for undergraduate programs in Science, Technology and Society (STS), and as a supplementary text in a variety of courses which touch upon energy studies, including environmental and technology policy, environmental, mineral and business law, energy and resource economics. Fully updated second edition of successful first edition that was adopted on Science, Technology and Society courses Provides a critical examination of all aspects of modern energy production for non-technical readers For a broad readership from a variety of backgrounds

  5. Cognitive Psychology and Instruction. Third Edition.

    Bruning, Roger H.; Schraw, Gregory J.; Ronning, Royce R.

    Like the earlier editions, the current text is directed at educators who are interested in understanding the principles of cognitive psychology and applying them to instruction and curriculum design. The following chapters are included: (1) "Introduction to Cognitive Psychology"; (2) "Sensory, Short-Term, and Working Memory"; (3) "Long-Term…

  6. Engineered Viruses as Genome Editing Devices

    Chen, Xiaoyu; Gonçalves, Manuel A F V

    2016-01-01

    Genome editing based on sequence-specific designer nucleases, also known as programmable nucleases, seeks to modify in a targeted and precise manner the genetic information content of living cells. Delivering into cells designer nucleases alone or together with donor DNA templates, which serve as surrogate homologous recombination (HR) substrates, can result in gene knockouts or gene knock-ins, respectively. As engineered replication-defective viruses, viral vectors are having an increasingly important role as delivery vehicles for donor DNA templates and designer nucleases, namely, zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs) and clustered, regularly interspaced, short palindromic repeats (CRISPR)-associated Cas9 (CRISPR−Cas9) nucleases, also known as RNA-guided nucleases (RGNs). We review this dual role played by engineered viral particles on genome editing while focusing on their main scaffolds, consisting of lentiviruses, adeno-associated viruses, and adenoviruses. In addition, the coverage of the growing body of research on the repurposing of viral vectors as delivery systems for genome editing tools is complemented with information regarding their main characteristics, pros, and cons. Finally, this information is framed by a concise description of the chief principles, tools, and applications of the genome editing field as a whole. PMID:26336974

  7. 10 Tempting Image-Editing Tasks

    Guhin, Paula

    2009-01-01

    Asking students to manipulate digital photos on the computer is one of the easiest ways the author knows to engage their attention. It's fabulous fun for them and a great teaching tool for educators. In this article, the author presents 10 ways to impress students with image-editing software. These are: (1) filters are fascinating; (2) get a move…

  8. Basics of Desktop Publishing. Second Edition.

    Beeby, Ellen; Crummett, Jerrie

    This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

  9. The agents of natural genome editing.

    Witzany, Guenther

    2011-06-01

    The DNA serves as a stable information storage medium and every protein which is needed by the cell is produced from this blueprint via an RNA intermediate code. More recently it was found that an abundance of various RNA elements cooperate in a variety of steps and substeps as regulatory and catalytic units with multiple competencies to act on RNA transcripts. Natural genome editing on one side is the competent agent-driven generation and integration of meaningful DNA nucleotide sequences into pre-existing genomic content arrangements, and the ability to (re-)combine and (re-)regulate them according to context-dependent (i.e. adaptational) purposes of the host organism. Natural genome editing on the other side designates the integration of all RNA activities acting on RNA transcripts without altering DNA-encoded genes. If we take the genetic code seriously as a natural code, there must be agents that are competent to act on this code because no natural code codes itself as no natural language speaks itself. As code editing agents, viral and subviral agents have been suggested because there are several indicators that demonstrate viruses competent in both RNA and DNA natural genome editing.

  10. Genome Editing in Sugarcane: Challenges ahead

    Chakravarthi Mohan

    2016-10-01

    Full Text Available Genome editing opens new and unique opportunities for researchers to enhance crop production. Until 2013, the zinc finger nucleases (ZFNs and transcription activator-like effector nucleases (TALENs were the key tools used for genome editing applications. The advent of RNA-guided engineered nucleases - the type II clustered regularly interspaced short palindromic repeat (CRISPR/Cas9 (CRISPR-associated system from Streptococcus pyogenes holds great potential since it is simple, effective and more versatile than ZFNs and TALENs. CRISPR/Cas9 system has already been successfully employed in several crop plants. Use of these techniques is in its infant stage in sugarcane. Jung and Altpeter (2016 have reported TALEN mediated approach for the first time to reduce lignin content in sugarcane to make it amenable for biofuel production. This is so far the only report describing genome editing in sugarcane. Large genome size, polyploidy, low transformation efficiency, transgene silencing and lack of high throughput screening techniques are certainly great challenges for genome editing in sugarcane which would be discussed in detail in this review.

  11. The Art of Electronics - 2nd Edition

    Horowitz, Paul; Hill, Winfield

    1989-09-01

    This is the thoroughly revised and updated second edition of the hugely successful The Art of Electronics. Widely accepted as the single authoritative text and reference on electronic circuit design, both analog and digital, the original edition sold over 125,000 copies worldwide and was translated into eight languages. The book revolutionized the teaching of electronics by emphasizing the methods actually used by citcuit designers - a combination of some basic laws, rules to thumb, and a large nonmathematical treatment that encourages circuit values and performance. The new Art of Electronics retains the feeling of informality and easy access that helped make the first edition so successful and popular. It is an ideal first textbook on electronics for scientists and engineers and an indispensable reference for anyone, professional or amateur, who works with electronic circuits. The best self-teaching book and reference book in electronics Simply indispensable, packed with essential information for all scientists and engineers who build electronic circuits Totally rewritten chapters on microcomputers and microprocessors The first edition of this book has sold over 100,000 copies in seven years, it has a market in virtually all research centres where electronics is important

  12. Telling Mathematical Stories with Live Editing

    Thomson, Ian

    2017-01-01

    Using "live editing" it is possible to write code that can be run a section at a time. This makes it easier to spot and correct errors. It can also be used to create an interactive mathematical story. This brief article shows how MATLAB software can be used to take the user on a mathematical journey with historical connections.

  13. ETC 408/508: Technical Editing

    Charlton, Michael

    2013-01-01

    ETC 408/508: Technical Editing is a cross-listed undergraduate and graduate course at Missouri Western State University, an open admissions public university with approximately 6,000 students. 508 is an elective course for students in the Master of Applied Arts in Written Communication degree and highly recommended for those in the Technical…

  14. Edit propagation using geometric relationship functions

    Guerrero, Paul; Jeschke, Stefan; Wimmer, Michael; Wonka, Peter

    2014-01-01

    We propose a method for propagating edit operations in 2D vector graphics, based on geometric relationship functions. These functions quantify the geometric relationship of a point to a polygon, such as the distance to the boundary or the direction to the closest corner vertex. The level sets of the relationship functions describe points with the same relationship to a polygon. For a given query point, we first determine a set of relationships to local features, construct all level sets for these relationships, and accumulate them. The maxima of the resulting distribution are points with similar geometric relationships. We show extensions to handle mirror symmetries, and discuss the use of relationship functions as local coordinate systems. Our method can be applied, for example, to interactive floorplan editing, and it is especially useful for large layouts, where individual edits would be cumbersome. We demonstrate populating 2D layouts with tens to hundreds of objects by propagating relatively few edit operations. © 2014 ACM 0730-0301/2014/03- ART15 $15.00.

  15. European Corporate Law, 2nd edition

    Werlauff, Erik; Dorresteijn, Adriaan; Monteiro, Tiago Pereira

    As in the First Edition (1995) of this well-known book, the authors demonstrate that analysis and comparison of national corporate laws on a number of issues yield highly valuable general principles and observations, not least because business organisations, wherever located, tend to show...

  16. The NMC Horizon Report: 2013 Museum Edition

    Johnson, L.; Adams Becker, S.; Freeman, A.

    2013-01-01

    The "NMC Horizon Report: 2013 Museum Edition," is a co-production with the Marcus Institute for Digital Education in the Arts (MIDEA), and examines six emerging technologies for their potential impact on and use in education and interpretation within the museum environment: BYOD (Bring Your Own Device), crowdsourcing, electronic…

  17. Atlas of enchocardiography, 2nd edition

    Salcedo, E.

    1985-01-01

    Completely revised and expanded, this new edition focuses on the interdependence of M-mode and two-dimensional echocardiography in diagnosing cardiac disorders. Systematically organized to facilitate locating information, the atlas follows the entire echocardiographic process from test through diagnosis. Illustrations and representative echocardiographs are included

  18. International guide to the circus. - 2015 edition

    Huey, R.; Albrecht, E.; Belbahri, N.; Brunsdale, M.; Christian, J.; Garcia, J.; Giarola, A.; Jando, D.; Lehmann, R.; Marier, F.; Nieminen, K.; Parkinson, G.; Pierce, R.D.; Revolledo Cárdenas, J.; Rodenhuis, W.; Serena, A.; Schlotfeldt, A.; Shaina, C.; Shrake, P.; Simon, M.; St. Leon, M.; Stone, C.; Cooper, J.; Tamaoki, V.; Winkler, G.

    2015-01-01

    An easy-to-read publication defining 100 key circus terms translated in nine languages. The 2015 edition has been re-created in a smaller "pocket" version, 44 pages in length and weighing 63 grams per book. Additional images have been added to illustrate terms and each book is sold complete with a

  19. Handbook of paediatric radiography. Second edition

    Gyll, C.

    1985-01-01

    This book gives some ideas on how to achieve good radiographs of children. In this second edition most papers are expanded and brought up to date, the paper on the neonate completely rewritten, and a discussion of child development and child psychology added

  20. Edit propagation using geometric relationship functions

    Guerrero, Paul

    2014-04-15

    We propose a method for propagating edit operations in 2D vector graphics, based on geometric relationship functions. These functions quantify the geometric relationship of a point to a polygon, such as the distance to the boundary or the direction to the closest corner vertex. The level sets of the relationship functions describe points with the same relationship to a polygon. For a given query point, we first determine a set of relationships to local features, construct all level sets for these relationships, and accumulate them. The maxima of the resulting distribution are points with similar geometric relationships. We show extensions to handle mirror symmetries, and discuss the use of relationship functions as local coordinate systems. Our method can be applied, for example, to interactive floorplan editing, and it is especially useful for large layouts, where individual edits would be cumbersome. We demonstrate populating 2D layouts with tens to hundreds of objects by propagating relatively few edit operations. © 2014 ACM 0730-0301/2014/03- ART15 $15.00.

  1. Post-editing through Speech Recognition

    Mesa-Lao, Bartolomé

    (i.e. typing, handwriting and speaking) to improve the efficiency and accuracy of the translation process. However, further studies need to be conducted to build up new knowledge about the way in which state-of-the-art speech recognition software can be applied to the post-editing process...

  2. ISEE : An Intuitive Sound Editing Environment

    Vertegaal, R.P.H.; Bonis, E.

    1994-01-01

    This article presents ISEE, an intuitive sound editing environment, as a general sound synthesis model based on expert auditory perception and cognition of musical instruments. It discusses the backgrounds of current synthesizer user interface design and related timbre space research. Of the three

  3. Measurement and Assessment in Teaching. Eighth Edition.

    Linn, Robert L.; Gronlund, Norman E.

    This book is intended to introduce the classroom teacher and prospective teacher to the elements of measurement and assessment that are essential to good teaching. The main theme is that assessment plays an important role in the instructional process. This edition has been revised to reflect major changes in educational assessment since the last…

  4. Thermodynamics of Fluids Under Flow Second Edition

    Jou, David; Criado-Sancho, Manuel

    2011-01-01

    This is the second edition of the book “Thermodynamics of Fluids under Flow,” which was published in 2000 and has now been corrected, expanded and updated. This is a companion book to our other title Extended irreversible thermodynamics (D. Jou, J. Casas-Vázquez and G. Lebon, Springer, 4th edition 2010), and of the textbook Understanding non-equilibrium thermodynamics (G. Lebon, D. Jou and J. Casas-Vázquez, Springer, 2008. The present book is more specialized than its counterpart, as it focuses its attention on the non-equilibrium thermodynamics of flowing fluids, incorporating non-trivial thermodynamic contributions of the flow, going beyond local equilibrium theories, i.e., including the effects of internal variables and of external forcing due to the flow. Whereas the book's first edition was much more focused on polymer solutions, with brief glimpses into ideal and real gases, the present edition covers a much wider variety of systems, such as: diluted and concentrated polymer solutions, polymer ble...

  5. Efficient Communication Protocols for Deciding Edit Distance

    Jowhari, Hossein

    2012-01-01

    In this paper we present two communication protocols on computing edit distance. In our first result, we give a one-way protocol for the following Document Exchange problem. Namely given x ∈ Σn to Alice and y ∈ Σn to Bob and integer k to both, Alice sends a message to Bob so that he learns x...... or truthfully reports that the edit distance between x and y is greater than k. For this problem, we give a randomized protocol in which Alice transmits at most O ˜ (klog 2 n) bits and each party’s time complexity is O ˜ (nlogn+k 2 log 2 n) . Our second result is a simultaneous protocol for edit distance over...... permutations. Here Alice and Bob both send a message to a third party (the referee) who does not have access to the input strings. Given the messages, the referee decides if the edit distance between x and y is at most k or not. For this problem we give a protocol in which Alice and Bob run a O...

  6. Critical Social Theories. 2nd Edition

    Agger, Ben

    2006-01-01

    Praised for its clarity and accessibility, this fully updated edition of "Critical Social Theories" presents a comprehensive analysis of leading social and cultural theories today. Diverse perspectives are addressed from feminism and cultural studies to postmodernism and critical theory. Written accessibly for students and faculty, the second…

  7. CRISPR-Cas9 gene editing

    Oude Blenke, Erik; Evers, Martijn J.W.; Mastrobattista, Enrico; Oost, van der John

    2016-01-01

    The CRISPR-Cas9 gene editing system has taken the biomedical science field by storm, initiating rumors about future Nobel Prizes and heating up a fierce patent war, but also making significant scientific impact. The Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR), together with

  8. Psychology's struggle for existence: Second edition, 1913.

    Wundt, Wilhelm; Lamiell, James T

    2013-08-01

    Presents an English translation of Wilhelm Wundt's Psychology's struggle for existence: Second edition, 1913, by James T. Lamiell in August, 2012. In his essay, Wundt advised against the impending divorce of psychology from philosophy. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  9. Researching Society and Culture. Third Edition

    Seale, Clive, Ed.

    2012-01-01

    Clear, coherent and trusted, this book is the perfect guide to the main social research methods in use today. The much anticipated Third Edition of Clive Seale's bestselling title further expands its coverage to provide an authoritative introduction to all of the social research methods used to analyze qualitative and quantitative data. Written by…

  10. Does Money Matter in Education? Second Edition

    Baker, Bruce D.

    2016-01-01

    This second edition policy brief revisits the long and storied literature on whether money matters in providing a quality education. It includes research released since the original brief in 2012 and covers a handful of additional topics. Increasingly, political rhetoric adheres to the unfounded certainty that money does not make a difference in…

  11. Second Work in Progress Special Edition

    Bottequin, Ezra; Deutz, Marike; Ruggeri, Kai

    2014-01-01

    It is with great pleasure that the Journal of European Psychology Students presents its first special edition of the Work in Progress reports of the Junior Researcher Programme, resulting from a recently established partnership between these two services of the European Federation of Psychology

  12. Kids & Family Reading Report™. 5th Edition

    Scholastic Inc., 2015

    2015-01-01

    This report presents the 5th Edition of Scholastic's biannual study of children's and parents' attitudes and behaviors about reading. The latest research touches on reading aloud to children of all ages, the impact of reading independently for fun at school and at home, the importance of frequent reading, and the books children want most to read.…

  13. Total Quality Management in Education. Second Edition.

    Sallis, Edward

    Quality is at the top of most agendas, and improving quality is probably the most important task facing any institution. In addition, quality is difficult to define or measure. This book, the second edition of "Total Quality Management in Education," introduces the key concepts of Total Quality Management (TQM) and demonstrates how they…

  14. Nanoparticles for Site Specific Genome Editing

    McNeer, Nicole Ali

    Triplex-forming peptide nucleic acids (PNAs) can be used to coordinate the recombination of short 50-60 by "donor DNA" fragments into genomic DNA, resulting in site-specific correction of genetic mutations or the introduction of advantageous genetic modifications. Site-specific gene editing in hematopoietic stem and progenitor cells (HSPCs) could result in treatment or cure of inherited disorders of the blood such as beta-thalassemia. Gene editing in HSPCs and differentiated T cells could help combat HIV/AIDs by modifying receptors, such as CCR5, necessary for R5-tropic HIV entry. However, translation of genome modification technologies to clinical practice is limited by challenges in intracellular delivery, especially in difficult-to-transfect hematolymphoid cells. In vivo gene editing could also provide novel treatment for systemic monogenic disorders such as cystic fibrosis, an autosomal recessive disorder caused by mutations in the cystic fibrosis transmembrane receptor. Here, we have engineered biodegradable nanoparticles to deliver oligonucleotides for site-specific genome editing of disease-relevant genes in human cells, with high efficiency, low toxicity, and editing of clinically relevant cell types. We designed nanoparticles to edit the human beta-globin and CCR5 genes in hematopoietic cells. We show that poly(lactic-co-glycolic acid) (PLGA) nanoparticles can delivery PNA and donor DNA for site-specific gene modification in human hematopoietic cells in vitro and in vivo in NOD-scid IL2rgammanull mice. Nanoparticles delivered by tail vein localized to hematopoietic compartments in the spleen and bone marrow of humanized mice, resulting in modification of the beta-globin and CCR5 genes. Modification frequencies ranged from 0.005 to 20% of cells depending on the organ and cell type, without detectable toxicity. This project developed highly versatile methods for delivery of therapeutics to hematolymphoid cells and hematopoietic stem cells, and will help to

  15. An electronic edition of eighteenth-century drama: the materiality of editing in performance

    Pinto, Isabel

    2016-01-01

    In the domain of electronic edition, drama’s specificity has been considered in terms of metadata improvements and possibilities. At the same time, an increasing closeness between art history research and performance art has demonstrated its methodological value to assess the complex nature of the archive. My post-doctoral research follows the lead and goes as far as proposing that performance art can be an adequate methodology when preparing the electronic edition of eighteenth-century drama...

  16. Cloud Properties of CERES-MODIS Edition 4 and CERES-VIIRS Edition 1

    Sun-Mack, Sunny; Minnis, Patrick; Chang, Fu-Lung; Hong, Gang; Arduini, Robert; Chen, Yan; Trepte, Qing; Yost, Chris; Smith, Rita; Brown, Ricky; hide

    2015-01-01

    The Clouds and Earth's Radiant Energy System (CERES) analyzes MODerate-resolution Imaging Spectroradiometer (MODIS) data and Visible Infrared Imaging Radiometer Suite (VIIRS) to derive cloud properties that are combine with aerosol and CERES broadband flux data to create a multi-parameter data set for climate study. CERES has produced over 15 years of data from Terra and over 13 years of data from Aqua using the CERES-MODIS Edition-2 cloud retrieval algorithm. A recently revised algorithm, CERESMODIS Edition 4, has been developed and is now generating enhanced cloud data for climate research (over 10 years for Terra and 8 years for Aqua). New multispectral retrievals of properties are included along with a multilayer cloud retrieval system. Cloud microphysical properties are reported at 3 wavelengths, 0.65, 1.24, and 2.1 microns to enable better estimates of the vertical profiles of cloud water contents. Cloud properties over snow are retrieved using the 1.24-micron channel. A new CERES-VIIRS cloud retrieval package was developed for the VIIRS spectral complement and is currently producing the CERES-VIIRS Edition 1 cloud dataset. The results from CERES-MODIS Edition 4 and CERES-VIIRS Edition 1 are presented and compared with each other and other datasets, including CALIPSO, CloudSat and the CERES-MODIS Edition-2 results.

  17. Unlimited liability will not automatically establish unlimited coverage

    Breining, W.

    1980-01-01

    Comments from the point of view of insurance companies. The plans of the Federal Ministry of the Interior to reform nuclear liability law in the Federal Republic of Germany, especially the intention to abolish the maximum liability limit, were commented upon also from the point of view of the insurance companies at the 6th German Atomic Energy Law Symposium. Reference was made, above all, to the problems which could arise from the fact that insurance companies need broad international backing and, accordingly, harmonization with the liability rules and conditions valid in other countries, in order to cover the high nuclear risks. Another problem to which attention was drawn was the need for evidence in catastrophic cases and the capability to settle cases of damage arising under such conditions. (orig.) 891 HP/orig. 892 MB [de

  18. Copy-Editing: The Cambridge Handbook.

    Butcher, Judith

    This handbook is designed as a reference manual for copy editors who prepare typescript for printing. It deals with the following topics: the copy editor's function; the work to be done at each stage in the production process; some difficult points of spelling, capitalization, and other features collectively known as "house style"; the parts of a…

  19. Visual Attention to Print-Salient and Picture-Salient Environmental Print in Young Children

    Neumann, Michelle M.; Summerfield, Katelyn; Neumann, David L.

    2015-01-01

    Environmental print is composed of words and contextual cues such as logos and pictures. The salience of the contextual cues may influence attention to words and thus the potential of environmental print in promoting early reading development. The present study explored this by presenting pre-readers (n = 20) and beginning readers (n = 16) with…

  20. The Decline of Print: Ten Years of Print Serial Use in a Small Academic Medical Library

    Rosati, Karen Thompson

    2006-01-01

    Tracking use of print journals over a ten-year period has allowed The University of South Carolina (USC) School of Medicine Library an essential tool for more accurate collection development, for both print and electronic selection. This lengthy study has provided usage statistics for purchasing decisions regarding electronic subscriptions still…

  1. µPlasma printing of hydrophobic and hydrophilic patterns to improve wetting behaviour for printed electronics

    Erik Niewenhuis; ir Renee Verkuijlen; Dr Jan Bernards; ir Martijn van Dongen; Lise Verbraeken

    2012-01-01

    Inkjet printing is a rapidly growing technology for depositing functional materials in the production of organic electronics. Challenges lie among others in the printing of high resolution patterns with high aspect ratio of functional materials to obtain the needed functionality like e.g.

  2. Print2Screen Mobile App: Embedding Multimedia in Printed ODL Course Materials Using QR Codes

    Abeywardena, Ishan Sudeera

    2017-01-01

    With the rise of OER and multimedia such as YouTube videos, many academic institutions are becoming mindful of the richness they bring into the teaching and learning process. Given that multimedia resources cannot be directly integrated into printed material, the only available alternative is to print hyperlinks, which teachers and learners can…

  3. 3D printed soft parallel actuator

    Zolfagharian, Ali; Kouzani, Abbas Z.; Khoo, Sui Yang; Noshadi, Amin; Kaynak, Akif

    2018-04-01

    This paper presents a 3-dimensional (3D) printed soft parallel contactless actuator for the first time. The actuator involves an electro-responsive parallel mechanism made of two segments namely active chain and passive chain both 3D printed. The active chain is attached to the ground from one end and constitutes two actuator links made of responsive hydrogel. The passive chain, on the other hand, is attached to the active chain from one end and consists of two rigid links made of polymer. The actuator links are printed using an extrusion-based 3D-Bioplotter with polyelectrolyte hydrogel as printer ink. The rigid links are also printed by a 3D fused deposition modelling (FDM) printer with acrylonitrile butadiene styrene (ABS) as print material. The kinematics model of the soft parallel actuator is derived via transformation matrices notations to simulate and determine the workspace of the actuator. The printed soft parallel actuator is then immersed into NaOH solution with specific voltage applied to it via two contactless electrodes. The experimental data is then collected and used to develop a parametric model to estimate the end-effector position and regulate kinematics model in response to specific input voltage over time. It is observed that the electroactive actuator demonstrates expected behaviour according to the simulation of its kinematics model. The use of 3D printing for the fabrication of parallel soft actuators opens a new chapter in manufacturing sophisticated soft actuators with high dexterity and mechanical robustness for biomedical applications such as cell manipulation and drug release.

  4. Effect of hydrophobic microstructured surfaces on conductive ink printing

    Kim, Seunghwan; Kang, Hyun Wook; Lee, Kyung Heon; Sung, Hyung Jin

    2011-01-01

    Conductive ink was printed on various microstructured substrates to measure the printing quality. Poly-dimethylsiloxane (PDMS) substrates were used to test the printability of the hydrophobic surface material. Microstructured arrays of 10 µm regular PDMS cubes were prepared using the MEMS fabrication technique. The gap distance between the cubes was varied from 10 to 40 µm. The printing wettability of the microstructured surfaces was determined by measuring the contact angle of a droplet of silver conductive ink. Screen-printing methods were used in the conductive line printing experiment. Test line patterns with finely varying widths (30–250 µm) were printed repeatedly, and the conductivity of the printed lines was measured. The printability, which was defined as the ratio of the successfully printed patterns to the total number of printed patterns, was analyzed as a function of the linewidth and the gap distance of the microstructured surfaces

  5. Genetic mapping uncovers cis-regulatory landscape of RNA editing.

    Ramaswami, Gokul; Deng, Patricia; Zhang, Rui; Anna Carbone, Mary; Mackay, Trudy F C; Li, Jin Billy

    2015-09-16

    Adenosine-to-inosine (A-to-I) RNA editing, catalysed by ADAR enzymes conserved in metazoans, plays an important role in neurological functions. Although the fine-tuning mechanism provided by A-to-I RNA editing is important, the underlying rules governing ADAR substrate recognition are not well understood. We apply a quantitative trait loci (QTL) mapping approach to identify genetic variants associated with variability in RNA editing. With very accurate measurement of RNA editing levels at 789 sites in 131 Drosophila melanogaster strains, here we identify 545 editing QTLs (edQTLs) associated with differences in RNA editing. We demonstrate that many edQTLs can act through changes in the local secondary structure for edited dsRNAs. Furthermore, we find that edQTLs located outside of the edited dsRNA duplex are enriched in secondary structure, suggesting that distal dsRNA structure beyond the editing site duplex affects RNA editing efficiency. Our work will facilitate the understanding of the cis-regulatory code of RNA editing.

  6. IMPACT OF ENVIRONMENTAL CONDITIONS ON THE LIFE CYCLE OF EDITIONS OF BOOKS KEPT IN ARCHIVES

    Natalia Onici

    2010-01-01

    Full Text Available A library is a collection of sources, resources, and services, and the structure in which it is housed; it is organized foruse and maintained by a public body, an institution, or a private individual. In the more traditional sense, a library is acollection of books.This paper presents studies about the importance of environmental conditions on the life cycle of editions of books keptin archives and libraries. Under which it was established that environmental conditions do not meet current standards,which led to the development of microorganisms on the surface both editions of books and libraries as reviewed.Manuscripts and printed books are the part of national and universal cultural heritage, along with other spiritualvalues that define spirituality of a nation.Library policy scope has evolved and continues to develop within the meaning of complication because of a range offactors: social, economic, political, etc.. Governmental strategies and decisions of public authorities are deeplydetermined by convergence, globalization and cooperation undoubtedly lead to regrouping library institutions invarious areas: computerization, trade, digitization, etc.

  7. IMRT fluence map editing to control hot and cold spots

    Taylor Cook, J.; Tobler, Matt; Leavitt, Dennis D.; Watson, Gordon

    2005-01-01

    Manually editing intensity-modulated radiation therapy (IMRT) fluence maps effectively controls hot and cold spots that the IMRT optimization cannot control. Many times, re-optimizing does not reduce the hot spots or increase the cold spots. In fact, re-optimizing only places the hot and cold spots in different locations. Fluence-map editing provides manual control of dose delivery and provides the best treatment plan possible. Several IMRT treatments were planned using the Varian Eclipse planning system. We compare the effects on dose distributions between fluence-map editing and re-optimization, discuss techniques for fluence-map editing, and analyze differences between fluence editing on one beam vs. multiple beams. When editing a beam's fluence map, it is essential to choose a beam that least affects dose to the tumor and critical structures. Editing fluence maps gives an advantage in treatment planning and provides controlled delivery of IMRT dose

  8. Print quality challenges for the next decade

    Meyer, John D.

    1990-07-01

    The decade of the eighties has seen a remarkable transformation in the performance and capabilities of shared and personal printers. Dramatic gains have been made in four key areas: cost, throughput, reliability and most significantly, print quality. The improvements in text print quality due to algorithmic fonts and increased resolution have been pivotal in the creation of the desktop publishing market. Electronic pre-press systems now include hardware to receive Postscript files accompanied by color originals for scanning and separation. These systems have application in the commercial printing of a wide variety of material e.g. books, magazines, brochures, newspapers. The vision of the future of hardcopy now embraces the full spectrum from typeset text to full color reproduction of natural images due to the advent of grayscale and color capability in printer technology. This will place increased demands for improvements in print quality, particularly in the use of grayscale and color. This paper gives an overview of the challenges which must be met and discusses data communication standards and print quality measurement techniques as a means of meeting these challenges for both color and black and white output.

  9. THE DISTRIBUTION NETWORK DEVELOPEMENT IN PRINT MEDIA

    Loredana Iordache

    2012-09-01

    Full Text Available In this article, we identify the characteristics of the distribution networks in print media and the features ofmarketing in mass media, emphasising the attempts initiated by the press in the context of the financial crisis. Theresearch was conducted through a case study on regional newspaper,, Gazeta de Sud'' The main problems analyzedwere decreasing newspaper circulation and advertising. The research taken into account trends and developmentsworldwide print media as well as print media particularities of Romania, with a focus on identifying factors thatcontributed to the closure of a significant number of newspapers, or their transition from printed version online format.The paper is mainly focused on some practical issues related to the way of organizing the print media sales networks,the authors elaborating proposals for the implementation of certain measures to increase the circulation, on the onehand, and on the hand, to increase the sale of ad space in the newspaper. Compared with other products, thenewspaper has unique characteristics caused by daily changing content, and therefore the product itself. Having ahighly perishable, the content of media products should always seen in relation to time, which requires more rapiddistribution and continuous production.

  10. Three-Dimensional Printed Graphene Foams.

    Sha, Junwei; Li, Yilun; Villegas Salvatierra, Rodrigo; Wang, Tuo; Dong, Pei; Ji, Yongsung; Lee, Seoung-Ki; Zhang, Chenhao; Zhang, Jibo; Smith, Robert H; Ajayan, Pulickel M; Lou, Jun; Zhao, Naiqin; Tour, James M

    2017-07-25

    An automated metal powder three-dimensional (3D) printing method for in situ synthesis of free-standing 3D graphene foams (GFs) was successfully modeled by manually placing a mixture of Ni and sucrose onto a platform and then using a commercial CO 2 laser to convert the Ni/sucrose mixture into 3D GFs. The sucrose acted as the solid carbon source for graphene, and the sintered Ni metal acted as the catalyst and template for graphene growth. This simple and efficient method combines powder metallurgy templating with 3D printing techniques and enables direct in situ 3D printing of GFs with no high-temperature furnace or lengthy growth process required. The 3D printed GFs show high-porosity (∼99.3%), low-density (∼0.015g cm -3 ), high-quality, and multilayered graphene features. The GFs have an electrical conductivity of ∼8.7 S cm -1 , a remarkable storage modulus of ∼11 kPa, and a high damping capacity of ∼0.06. These excellent physical properties of 3D printed GFs indicate potential applications in fields requiring rapid design and manufacturing of 3D carbon materials, for example, energy storage devices, damping materials, and sound absorption.

  11. The edition from the VNLU fonds, unknown in the bibliography, as a sourcefor the biography of the book owner in the 18th ct. (description of the edition and the copy

    Zabolotna N.

    2014-01-01

    Full Text Available The research of small (with a small amount of pages editions is now very actual as such publications usually are not covered by most scientific catalogs. This complicates their attribution and primarily their dating because many of these books are undated. The activity of Pochayiv Assumption monastery printing house in the 18th ct., especially in 70’s - 80’s is an example of active publication of such kind of editions. The article is devoted to the copy of the book «Decretum quo Sanctissimus Dominus Noster Clemens Divina Providentiв PP. XIV. concedit Proto-Archmandritж Congregationis S. Basilii Magni Ruthenorum, nec non cжteris Archimadritis ejusdem Congregationis, eorumquи in perpetuum Successoribus, facuttalem impertendi Benedictionem cum Jndulgentia Plenaria in articulo mortis» [Pochayiv: Typography of Assumption Monastery, between 1772 and 1774], which is not described in the bibliography. The investigated copy is also a document of one of the owners, the Basilian monk Amvrosii Lukasevych. The article has appendices with scientific descriptions of the edition and the copy.

  12. Transportation Energy Data Book, Edition 18

    Davis, Stacy C.

    1998-09-01

    The Transportation Energy Data Book: Edition 18 is a statistical compendium prepared and published by Oak Ridge National Laboratory (ORNL) under contract with the Office of Transportation Technologies in the Department of Energy (DOE). Designed for use as a desk-top reference, the data book represents an assembly and display of statistics and information that characterize transportation activity, and presents data on other factors that influence transportation energy use. The purpose of this document is to present relevant statistical data in the form of tables and graphs. This edition of the Data Book has 11 chapters which focus on various aspects of the transportation industry. Chapter 1 focuses on petroleum; Chapter 2 - energy Chapter 3 - emissions; Chapter 4 - transportation and the economy; Chapter 5 - highway vehicles; Chapter 6 - Light vehicles; Chapter 7 - heavy vehicles; Chapter 8 - alternative fuel vehicles; Chapter 9 - fleet vehicles; Chapter 10 - household vehicles; and Chapter 11 - nonhighway modes. The sources used represent the latest available data.

  13. Handbook of radioactivity analysis. Second edition

    L'Annunziata, M.

    2003-07-01

    This updated and much expanded Second Edition is an authoritative handbook providing the principles, practical techniques, and procedures for the accurate measurement of radioactivity from the very low levels encountered in the environment to higher levels measured in radioisotope research, clinical laboratories, biological sciences, radionuclide standardization, nuclear medicine, nuclear power, fuel cycle facilities, and in the implementation of nuclear safeguards. The book describes the preparation of samples from a wide variety of matrices, assists the investigator or technician in the selection and use of appropriate radiation detectors, and presents state-of-the-art methods of analysis. Fundamentals of radioactivity properties, radionuclide decay, the calculations involved, and methods of detection provide the basis for a thorough understanding of the analytical procedures. The Handbook of Radioactivity Analysis, Second Edition is suitable as a teaching text for university and professional training courses

  14. Readying Cavalli's operas for the classroom: textbooks, editions, and the teaching of a non-canonic composer

    Robert Holzer

    2014-12-01

    Full Text Available My title pays homage to a recent volume of essays edited by Ellen Rosand and devoted to the scholarship and performance of Francesco Cavalli’s operas. Yet if love of wordplay inspired it, coincidence confirmed it. The volume appeared in print just months after my own foray into editing, albeit of a very different kind. I had been asked to prepare one of the volumes of The Oxford Anthology of Western Music, specifically the part that deals with Baroque music. As its title suggests, the anthology accompanies The Oxford History of Western Music: College Edition, the one-volume abridgement of Richard Taruskin’s five-volume behemoth prepared by Christopher H. Gibbs. I was charged with assembling scores of the works discussed therein and writing commentary on them, based on Taruskin’s own in the larger text. While I was left free to do as I pleased with the latter, such was not the case with the former. Thus music after 1700 occupies more pages than that before 1700, and the earlier repertory features some notable lacunae. That one of the biggest is Francesco Cavalli comes as no surprise, for in the course of the more than 3,800 pages of Taruskin’s original the composer receives exactly three sentences.

  15. Hybrid 3D Printing of Soft Electronics.

    Valentine, Alexander D; Busbee, Travis A; Boley, John William; Raney, Jordan R; Chortos, Alex; Kotikian, Arda; Berrigan, John Daniel; Durstock, Michael F; Lewis, Jennifer A

    2017-10-01

    Hybrid 3D printing is a new method for producing soft electronics that combines direct ink writing of conductive and dielectric elastomeric materials with automated pick-and-place of surface mount electronic components within an integrated additive manufacturing platform. Using this approach, insulating matrix and conductive electrode inks are directly printed in specific layouts. Passive and active electrical components are then integrated to produce the desired electronic circuitry by using an empty nozzle (in vacuum-on mode) to pick up individual components, place them onto the substrate, and then deposit them (in vacuum-off mode) in the desired location. The components are then interconnected via printed conductive traces to yield soft electronic devices that may find potential application in wearable electronics, soft robotics, and biomedical devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. 1D Printing of Recyclable Robots

    Cellucci, Daniel; MacCurdy, Robert; Lipson, Hod

    2017-01-01

    Recent advances in 3D printing are revolutionizing manufacturing, enabling the fabrication of structures with unprecedented complexity and functionality. Yet biological systems are able to fabricate systems with far greater complexity using a process that involves assembling and folding a linear...... string. Here, we demonstrate a 1D printing system that uses an approach inspired by the ribosome to fabricate a variety of specialized robotic automata from a single string of source material. This proof-ofconcept system involves both a novel manufacturing platform that configures the source material...... using folding and a computational optimization tool that allows designs to be produced from the specification of high-level goals. We show that our 1D printing system is able to produce three distinct robots from the same source material, each of which is capable of accomplishing a specialized...

  17. Inkjet Printed Radio Frequency Passive Components

    McKerricher, Garret

    2015-12-01

    Inkjet printing is a mature technique for colourful graphic arts. It excels at customized, large area, high resolution, and small volume production. With the developments in conductive, and dielectric inks, there is potential for large area inkjet electronics fabrication. Passive radio frequency devices can benefit greatly from a printing process, since the size of these devices is defined by the frequency of operation. The large size of radio frequency passives means that they either take up expensive space “on chip” or that they are fabricated on a separate lower cost substrate and somehow bonded to the chips. This has hindered cost-sensitive high volume applications such as radio frequency identification tags. Substantial work has been undertaken on inkjet-printed conductors for passive antennas on microwave substrates and even paper, yet there has been little work on the printing of the dielectric materials aimed at radio frequency passives. Both the conductor and dielectric need to be integrated to create a multilayer inkjet printing process that is capable of making quality passives such as capacitors and inductors. Three inkjet printed dielectrics are investigated in this thesis: a ceramic (alumina), a thermal-cured polymer (poly 4 vinyl phenol), and a UV-cured polymer (acrylic based). For the conductor, both a silver nanoparticle ink as well as a custom in-house formulated particle-free silver ink are explored. The focus is on passives, mainly capacitors and inductors. Compared to low frequency electronics, radio frequency components have additional sensitivity regarding skin depth of the conductor and surface roughness, as well as dielectric constant and loss tangent of the dielectric. These concerns are investigated with the aim of making the highest quality components possible and to understand the current limitations of inkjet-fabricated radio frequency devices. An inkjet-printed alumina dielectric that provides quality factors of 200 and high

  18. A screen-printed flexible flow sensor

    Moschos, A; Kaltsas, G; Syrovy, T; Syrova, L

    2017-01-01

    A thermal flow sensor was printed on a flexible plastic substrate using exclusively screen-printing techniques. The presented device was implemented with custom made screen-printed thermistors, which allows simple, cost-efficient production on a variety of flexible substrates while maintaining the typical advantages of thermal flow sensors. Evaluation was performed for both static (zero flow) and dynamic conditions using a combination of electrical measurements and IR imaging techniques in order to determine important characteristics, such as temperature response, output repeatability, etc. The flow sensor was characterized utilizing the hot-wire and calorimetric principles of operation, while the preliminary results appear to be very promising, since the sensor was successfully evaluated and displayed adequate sensitivity in a relatively wide flow range. (paper)

  19. Lip prints: Role in forensic odontology.

    Dineshshankar, Janardhanam; Ganapathi, Nalliappan; Yoithapprabhunath, Thukanaykanpalayam Ragunathan; Maheswaran, Thangadurai; Kumar, Muniapillai Siva; Aravindhan, Ravi

    2013-06-01

    Identification plays a major role in any crime investigation. The pattern of wrinkles on the lips has individual characteristics like fingerprints. Cheiloscopy is a forensic investigation technique that deals with identification of humans based on lips traces. In the past decades, lip-print studies attracted the attention of many scientists as a new tool for human identification in both civil and criminal issues. The lip crease pattern is on the vermilion border of the lip, which is quite mobile and lip prints may vary in appearance according to the pressure, direction and method used in making the print. It concludes by enlightening the readers with the fact that the possibilities to use the red part of lips to identify a human being are wider than it is commonly thought.

  20. Migration and Remittances Factbook 2016, Third Edition

    World Bank Group

    2016-01-01

    The Migration and Remittances Factbook 2016 attempts to present numbers and facts behind the stories of international migration and remittances, drawing on authoritative, publicly available data. It provides a snapshot of statistics on immigration, emigration, skilled emigration, and remittance flows for 210 countries and 15 regional and income groups. The Migration and Remittances Factbook 2016 updates the 2011 edition of the Factbook with additional data on bilateral migration and remittanc...