WorldWideScience

Sample records for university press series

  1. The Global University Press

    Science.gov (United States)

    Dougherty, Peter J.

    2012-01-01

    The modern world's understanding of American university press has long been shaped by university-press books. American university-press books are good international advertisements for the universities whose logos grace their spines. The growth of transnational scholarship and the expansion of digital communications networks are converging in ways…

  2. The new philosophy of psychiatry: its (recent) past, present and future: a review of the Oxford University Press series International Perspectives in Philosophy and Psychiatry

    Science.gov (United States)

    Banner, Natalie F; Thornton, Tim

    2007-01-01

    There has been a recent growth in philosophy of psychiatry that draws heavily (although not exclusively) on analytic philosophy with the aim of a better understanding of psychiatry through an analysis of some of its fundamental concepts. This 'new philosophy of psychiatry' is an addition to both analytic philosophy and to the broader interpretation of mental health care. Nevertheless, it is already a flourishing philosophical field. One indication of this is the new Oxford University Press series International Perspectives in Philosophy and Psychiatry seven volumes of which (by Bolton and Hill; Bracken and Thomas; Fulford, Morris, Sadler, and Stanghellini; Hughes, Louw, and Sabat; Pickering; Sadler; and Stanghellini) are examined in this critical review.

  3. The Moral Universes of Libertarian Press Theory.

    Science.gov (United States)

    Wuliger, Gregory T.

    1991-01-01

    Uses Kantian logic to analyze the statement of Libertarian press theory "Truth beats falsehood in a free marketplace of ideas" as a definition, an observation, and a universal truth. Notes three corresponding moral universes, with differing ethical obligations. Discusses strengths and weaknesses of each. Cautions media ethics analysts…

  4. Trial access to Cambridge University Press ebooks

    CERN Multimedia

    CERN Library

    2011-01-01

    From 1 August till 31 October, CERN users are invited to enjoy a trial access to all Cambridge University Press electronic books: http://ebooks.cambridge.org/. Please don't hesitate to send feedback to library.desk@cern.ch.

  5. AUPress: A Comparison of an Open Access University Press with Traditional Presses

    Science.gov (United States)

    McGreal, Rory; Chen, Nian-Shing

    2011-01-01

    This study is a comparison of AUPress with three other traditional (non-open access) Canadian university presses. The analysis is based on the rankings that are correlated with book sales on Amazon.com and Amazon.ca. Statistical methods include the sampling of the sales ranking of randomly selected books from each press. The results of one-way…

  6. Brad Patterson, Tom Brooking, and Jim McAloon, Unpacking the Kist: The Scots in New Zealand. McGill-Queen's Studies in Ethnic History Series, No. 2.33. Montreal: McGill-Queen’s University Press, 2013. Pp. 412. ISBN 978-0-7735-4190-0. CAD $100.00.

    Directory of Open Access Journals (Sweden)

    Seán Gerard Brosnahan

    2014-11-01

    Full Text Available Brad Patterson, Tom Brooking, and Jim McAloon, Unpacking the Kist: The Scots in New Zealand. McGill-Queen's Studies in Ethnic History Series, No. 2.33. Montreal: McGill-Queen’s University Press, 2013. Pp. 412. ISBN 978-0-7735-4190-0. CAD $100.00.

  7. Introducing Collabra, OA Journal from University of California Press

    OpenAIRE

    Morgan, Daniel

    2015-01-01

    An introductory presentation of Collabra, the open access mega journal from University of California Press, highlighting its unique business model which shares and spreads revenue back to the research community. (Presented at the FORCE 2015 conference at the University of Oxford, January 13, 2015.)

  8. Engaging and Supporting a University Press Scholarly Community

    Directory of Open Access Journals (Sweden)

    Megan Taylor

    2018-03-01

    Full Text Available In this paper we explore how the development of The University of Huddersfield Press, a publisher of open access scholarly journals and monographs, has enabled the sharing of research with a wider online audience. We situate the development of the Press within a wider research environment and growing community of New University Presses (NUPs where there is an increasing demand for demonstrating research impact, which drives the need for improved analysis and reporting of impact data, a task that often falls within the remit of library and academic support services. We detail the benefits of the University Press Manager role in terms of ensuring professional service that delivers consistency and sustainability. We go on to outline the experiences of engaging with different online spaces and detail the extensive support for student authors. We argue that in order for the Press to support building a strong and engaged scholarly community and provide new spaces for emerging research, continued investment in both platform development and infrastructure is required.

  9. International Commercial Contracts, by Giuditta Cordero Moss. (Cambridge: Cambridge University Press, 2014)

    DEFF Research Database (Denmark)

    Lando, Ole

    2015-01-01

    Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713......Review of: Giuditta Cordero Moss, International Commercial Contracts. Cambridge: Cambridge University Press, 2014. XV + 329 pages. ISBN: 9781107684713...

  10. The Suburban Press; First Steps toward an Annotated Bibliography. Suburban Press Research Series No. 16 and 17.

    Science.gov (United States)

    Northern Illinois Univ., De Kalb. Suburban Press Research Center.

    This bibliography lists journal articles concerning various aspects of the suburban press. Annotated selections, arranged alphabetically according to journal title, are gathered from the following periodicals: "Advertising Age,""Business Week,""Columbia Journalism Review,""Editor and Publisher,""Grassroots Editor,""Journalism…

  11. The Moundville Expeditions of Clarence Bloomfield Moors, edited and with an Introduction by Vernon James Knight Jr. University of Alabama Press, Tuscaloosa, 1996

    Directory of Open Access Journals (Sweden)

    Douglas R. Givens

    1997-11-01

    Full Text Available The University of Alabama Press has done a valuable service to the Americanist archaeological community by reprinting certain parts of Clarence B. Moore's Moundville's work. As part of their series "Classics in Southeastern Archaeology", this volume provides the historian of Americanist archaeology yet another glimpse into the Moore's classic work at Moundville.

  12. Open Access Publishing in Canada: Current and Future Library and University Press Supports

    Directory of Open Access Journals (Sweden)

    Andrew Waller

    2013-06-01

    Full Text Available Canadian university libraries, Canadian university presses, and non-university scholarly presses at Canadian universities were surveyed in the first part of 2010 as to the level of their support of Open Access (OA journal publishing. Respondents were asked about journal hosting services in their organization as well as their thoughts on internal and external support for open access publishing. Results showed that most of the organizations are hosting OA journals, largely between one and five in number, and many supply journal hosting services, including some technical support. Personnel resources are a notable factor in the ability to host journals. Most respondents engage in some sort of internal support for open access publishing and are open to options that they are presently not utilizing. They are particularly amenable to OA publishing support from outside of their organizations, especially assistance at a consortial level.

  13. The Ideological Profile of Harvard University Press: Categorizing 494 Books Published 2000-2010

    OpenAIRE

    David Gordon; Per Nilsson

    2011-01-01

    The principal author surveyed all Harvard University Press titles published (in first edition) between 2000 and well into 2010, making 10+ years of publication, in the subject areas of Business & Economics, History, Philosophy, Political Science, and Sociology, as well as a residual of Law titles. A large number of titles were initially removed from the survey because the book title suggested little connection or platform for political ideology. After making these removals, 494 titles remaine...

  14. Lauren Berlant and Lee Edelman, Sex, Or The Unbearable (Durham: Duke University Press, 2014, pp. 168, ISBN: 9780822355946, £13.99, paperback.

    Directory of Open Access Journals (Sweden)

    Hannah Proctor

    2014-01-01

    Full Text Available 'So few colleges and universities bother to teach human sexuality...so much stigma adheres even to scholarly investigation of sex,' Gayle Rubin lamented in her 1984 essay 'Thinking Sex'. But it was an academic conference on Rubin's work - 'Rethinking Sex', a lavish threeday event, held at the University of Pennsylvania in 2009 - that provided the initial impetus for Lauren Berlant and Lee Edelman to enter into a dialogue on sexuality. The result is Sex, or the Unbearable, published by Duke University Press, the first in a series on queer theory edited by the authors.

  15. The Student Newspaper; Report of the Special Commission on the Student Press to the President of the University of California.

    Science.gov (United States)

    American Council on Education, Washington, DC.

    The Commission on the Student Press was appointed by the President of the University of California to assess the nature, role and quality of student newspapers at the University of California's campuses and ascertain their degree of effectiveness in meeting student needs. The Commission also considered such issues as (1) how should the student…

  16. Universal Linear Motor Driven Leg Press Dynamometer and Concept of Serial Stretch Loading.

    Science.gov (United States)

    Hamar, Dušan

    2015-08-24

    Paper deals with backgrounds and principles of universal linear motor driven leg press dynamometer and concept of serial stretch loading. The device is based on two computer controlled linear motors mounted to the horizontal rails. As the motors can keep either constant resistance force in selected position or velocity in both directions, the system allows simulation of any mode of muscle contraction. In addition, it also can generate defined serial stretch stimuli in a form of repeated force peaks. This is achieved by short segments of reversed velocity (in concentric phase) or acceleration (in eccentric phase). Such stimuli, generated at the rate of 10 Hz, have proven to be a more efficient means for the improvement of rate of the force development. This capability not only affects performance in many sports, but also plays a substantial role in prevention of falls and their consequences. Universal linear motor driven and computer controlled dynamometer with its unique feature to generate serial stretch stimuli seems to be an efficient and useful tool for enhancing strength training effects on neuromuscular function not only in athletes, but as well as in senior population and rehabilitation patients.

  17. Presidential Leadership: Making a Difference. American Council on Education/Oryx Press Series on Higher Education.

    Science.gov (United States)

    Fisher, James L.; Koch, James V.

    This work focuses on the transformational theory of leadership, which advocates appointment of a strong charismatic president to lead and transform the university through the power of his or her own vision for the future. The authors argue that this type of leadership is far more effective than the transactionalist leadership style, which…

  18. Indexed University presses: overlap and geographical distribution in five book assessment databases

    Energy Technology Data Exchange (ETDEWEB)

    Mañana-Rodriguez, J.; Gimenez-Toledo, E

    2016-07-01

    Scholarly books have been a periphery among the objects of study of bibliometrics until recent developments provided tools for assessment purposes. Among scholarly book publishers, University Presses (UPs hereinafter), subject to specific ends and constrains in their publishing activity, might also remain on a second-level periphery despite their relevance as scholarly book publishers. In this study the authors analyze the absolute and relative presence, overlap and uniquely-indexed cases of 503 UPs by country, among five assessment-oriented databases containing data on scholarly book publishers: Book Citation Index, Scopus, Scholarly Publishers Indicators (Spain), the lists of publishers from the Norwegian System (CRISTIN) and the lists of publishers from the Finnish System (JUFO). The comparison between commercial databases and public, national databases points towards a differential pattern: prestigious UPs in the English Speaking world represent larger shares and there is a higher overall percentage of UPs in the commercial databases, while the richness and diversity is higher in the case of national databases. Explicit or de facto biases towards production in English by commercial databases, as well as diverse indexation criteria might explain the differences observed. The analysis of the presence of UPs in different numbers of databases by country also provides a general picture of the average degree of diffusion of UPs among information systems. The analysis of ‘endemic’ UPs, those indexed only in one of the five databases points out to strongly different compositions of UPs in commercial and non-commercial databases. A combination of commercial and non commercial databases seems to be the optimal option for assessment purposes while the validity and desirability of the ongoing debate on the role of UPs can be also concluded. (Author)

  19. BOOK REVIEW - The Experience of Face Veil Wearers in Europe and the Law (Cambridge University Press United Kingdom 2014. ISBN 978-1-107-05830-9.

    Directory of Open Access Journals (Sweden)

    Jacques L Matthee

    2017-03-01

    Full Text Available This contribution published by Cambridge University Press provides a short overview of the book by Eva Brems "The Experience of Face Veil Wearers in Europe and the Law" published by Cambridge University Press, United Kingdom, in 2014. See ISBN 978-1-107-05830-9.

  20. Resenha de KURTZ, Marcus J. Latin American State Building in Comparative: social foundations of institutional order. New York: Cambrigde University Press/Ohio University Press, 2013

    Directory of Open Access Journals (Sweden)

    Rogério Makino

    2014-12-01

    Full Text Available Resumo  Em seu livro, Kurtz tenta entender a atual diferença nas capacidades estatais de Argentina, Uruguai, Chile e Peru a partir de uma perspectiva institucionalista, sendo fortemente influenciada pela noção de dependência de trajetória. Dois momentos teriam sido cruciais nessa trajetória: as relações de trabalho (livre ou servil à época da independência administrativa e o timing da incorporação das massas ao processo eleitoral. Palavras-chave capacidade estatal, dependência da trajetória, América Latina  --- Abstract In his book, Kurtz analyzes the current diferences in the state capacity of Argentina, Uruguay, Chili and Peru from na institutionalist perspective under strong influence of the notion of path dependence. Two moments would have been crucial in their state-building: the labor relations (free or servile by the time of their administrative independence and the timing of universalization of vote. Key words state-building, path dependence, Latin American --- Resumen En su libro, Kurtz intenta entender la actual diferencia en las capacidades estatales de Argentina, Uruguay, Chile y Perú a partir de una perspectiva institucionalista, destacadamente influenciada por la noción de dependencia de la trayectoria. Dos momentos habrían sido cruciales en esa trayectoria: las relaciones de trabajo (libre o serviles a la época de la independencia administrativa y el timing de la incorporación de las masas al proceso electoral. Palabras-clave capacidad estatal, dependencia da trayectoria, América Latina ---

  1. Time series analysis of diverse extreme phenomena: universal features

    Science.gov (United States)

    Eftaxias, K.; Balasis, G.

    2012-04-01

    The field of study of complex systems holds that the dynamics of complex systems are founded on universal principles that may used to describe a great variety of scientific and technological approaches of different types of natural, artificial, and social systems. We suggest that earthquake, epileptic seizures, solar flares, and magnetic storms dynamics can be analyzed within similar mathematical frameworks. A central property of aforementioned extreme events generation is the occurrence of coherent large-scale collective behavior with very rich structure, resulting from repeated nonlinear interactions among the corresponding constituents. Consequently, we apply the Tsallis nonextensive statistical mechanics as it proves an appropriate framework in order to investigate universal principles of their generation. First, we examine the data in terms of Tsallis entropy aiming to discover common "pathological" symptoms of transition to a significant shock. By monitoring the temporal evolution of the degree of organization in time series we observe similar distinctive features revealing significant reduction of complexity during their emergence. Second, a model for earthquake dynamics coming from a nonextensive Tsallis formalism, starting from first principles, has been recently introduced. This approach leads to an energy distribution function (Gutenberg-Richter type law) for the magnitude distribution of earthquakes, providing an excellent fit to seismicities generated in various large geographic areas usually identified as seismic regions. We show that this function is able to describe the energy distribution (with similar non-extensive q-parameter) of solar flares, magnetic storms, epileptic and earthquake shocks. The above mentioned evidence of a universal statistical behavior suggests the possibility of a common approach for studying space weather, earthquakes and epileptic seizures.

  2. Cambridge Illustrated History of Archaeology, edited by Paul G. Bahn, Cambridge University Press, New York, 1996

    OpenAIRE

    Givens, Douglas R.

    1997-01-01

    The Cambridge Illustrated History of Archaeology is another in a series of volumes devoted to the history of archaeology that have appeared in recent time. Paul Bahn, the editor of the volume, has broken down his coverage of the history of worldwide archaeology into the following arrangement 'The Archaeology of Archaeology", "Old Worlds and New, 1500-1760", "Antiquarians and Explorers, 1760-1820", "Science and Romantic...

  3. Creating Open Textbooks: A Unique Partnership Between Oregon State University Libraries and Press and Open Oregon State

    Directory of Open Access Journals (Sweden)

    Faye A. Chadwell

    2016-05-01

    Full Text Available This article presents Oregon State University’s experience launching an innovative Open Textbook initiative in spring 2014. The partners, Open Oregon State and the Oregon State University Libraries and Press, aimed to reduce the cost of course materials for students while ensuring the content created was peer-reviewed and employed multimedia capabilities. This initiative sought to showcase existing and emerging disciplinary strengths of the University thus creating unique course content that could be shared globally. This article briefly describes the U.S. landscape for open textbook creation and adoption. It demonstrates how this unique partnership has developed, covering barriers and benefits, and what the future could hold for new projects.

  4. Michele Renee Salzman, Marvina A. Sweeney & William Adler (eds., The Cambridge History of Religions in the Ancient World (2 vols. (New York: Cambridge University Press, 2013

    Directory of Open Access Journals (Sweden)

    Giorgio Baruchello

    2014-03-01

    Full Text Available Review of: Michele Renee Salzman, Marvina A. Sweeney & William Adler (eds., The Cambridge History of Religions in the Ancient World (2 vols. (New York: Cambridge University Press, 2013

  5. Science at Harvard University: Historical Perspectives, edited by Clark A. Elliott and Margaret W. Rossiter. Lehigh University Press, Bethlehem, 1992

    OpenAIRE

    Christenson, Andrew L.

    1992-01-01

    This volume contains historical studies of several sciences as practiced at Harvard University. Two of these studies have relevance to the history of archaeology. A chapter by Toby Appel focuses upon the scientific career of Jeffries Wyman, first curator of Harvard's Peabody Museum. She contrasts Wyman's unassuming character with the dominating personality of his mentor and contemporary Louis Agassiz. Trained as a medi...

  6. Reciprocating pellet press

    Science.gov (United States)

    Jones, Charles W.

    1981-04-07

    A machine for pressing loose powder into pellets using a series of reciprocating motions has an interchangeable punch and die as its only accurately machines parts. The machine reciprocates horizontally between powder receiving and pressing positions. It reciprocates vertically to press, strip and release a pellet.

  7. Cambridge Illustrated History of Archaeology, edited by Paul G. Bahn, Cambridge University Press, New York, 1996

    Directory of Open Access Journals (Sweden)

    Douglas R. Givens

    1997-11-01

    Full Text Available The Cambridge Illustrated History of Archaeology is another in a series of volumes devoted to the history of archaeology that have appeared in recent time. Paul Bahn, the editor of the volume, has broken down his coverage of the history of worldwide archaeology into the following arrangement 'The Archaeology of Archaeology", "Old Worlds and New, 1500-1760", "Antiquarians and Explorers, 1760-1820", "Science and Romanticism, 1820-1860", "The Search for Human Origins, 1860-1920", "Archaeology Comes of Age, 1920-1960", "New Techniques and Competing Philosophies, 1960-1990",and "Current Controversies and Future Trends". Bahn's volume explores many of the major developments in archaeological practice from both in the classical world and was as from the practice of archaeology in the Americas. The volume even gives the reader a glimpse into the origins and growth of archaeology in New Zealand. Of particular interest is coverage of the history of early archaeological efforts having to do with early studies of human origins.

  8. Science at Harvard University: Historical Perspectives, edited by Clark A. Elliott and Margaret W. Rossiter. Lehigh University Press, Bethlehem, 1992

    Directory of Open Access Journals (Sweden)

    Andrew L. Christenson

    1992-05-01

    Full Text Available This volume contains historical studies of several sciences as practiced at Harvard University. Two of these studies have relevance to the history of archaeology. A chapter by Toby Appel focuses upon the scientific career of Jeffries Wyman, first curator of Harvard's Peabody Museum. She contrasts Wyman's unassuming character with the dominating personality of his mentor and contemporary Louis Agassiz. Trained as a medical doctor, Wyman's main love was zoology, particularly comparative anatomy. In his mid-40s, he encountered his first shell midden and was bitten by the archaeology bug. Soon he was doing pioneering excavation in both New England and Florida. In 1866, he was selected to be the curator of the Peabody Museum, primarily upon his strong museum background but also because of the high regard with which he was held by certain influential people. His selection to this position may have made him America's first professional archaeologist. His principal responsibilities were to collect and display archaeological and ethnological specimens and he made great steps in this direction prior to his death in 1874. Wyman's scientific work was poorly known or studied (he is best noted for having made the first scientific description of the gorilla, in part, Appel argues, because he did not seek acclaim or controversy. His greatest influence was locally through personal interactions with students and colleagues. His archaeological work is only briefly discussed in this and the following article, and there is still much to be written about this man of high character.

  9. Air University Press Publications

    National Research Council Canada - National Science Library

    2002-01-01

    .... Our publications program is designed primarily to help Air Force and other US war fighters, national leaders and policy makers, academicians, military historians, and other analysts understand...

  10. The universe all sliced up series explains complex subject

    CERN Multimedia

    Ostrow, J

    2003-01-01

    ' "NOVA's "The Elegant Universe," an entertaining and mostly understandable three-part miniseries based on Greene's book of the same title, will be broadcast on PBS over two Tuesdays, with two hours this Tuesday and one on Nov. 4. Part 1, "Einstein's Dream," begins at 8 p.m. Tuesday on Channel 6 ' (1 page).

  11. Book review: Dexter Hoyos, Mastering the West. Rome and Carthage at War, Oxford-New York, Oxford University Press, 2015, pp. XXI, 337; ISBN 9780199860104

    Directory of Open Access Journals (Sweden)

    Gabriele Demurtas

    2017-11-01

    Full Text Available This essay offers a critical review of the volume by Dexter Hoyos «Mastering the West. Rome and Carthage at War», published in 2015 in Oxford-New York by the Oxford University Press, focused on the conflicts that involved Rome and Carthage between 264 and 146 BC for the supremacy in the western Mediterranean.

  12. Neuwirth RJ, Svetlicinii A and De Castro Halis D (eds) The BRICS-Lawyers' Guide to Global Cooperation (Cambridge University Press 2017)

    OpenAIRE

    Sucker, F

    2018-01-01

    This contribution reviews the book The BRICS-Lawyers' Guide to Global Cooperation edited by Rostam J Neuwirth, Alexandr Svetlicinii and Denis De Castro Halis. It was published by Cambridge University Press in 2017, and deals with aspects of international trade and development involving the BRICS area -Brazil, Russia, India, China and South Africa. It is described as a unique reference book for academics, governmental officials, legal professionals, business executives, researchers and students.

  13. THE COMMUNITY PLANNING PROCESS. KANSAS STATE UNIVERSITY SHORT COURSE SERIES ON COMMUNITY PLANNING AND DEVELOPMENT, 6.

    Science.gov (United States)

    WEISENBURGER, RAY B.

    PART OF A KANSAS STATE UNIVERSITY SERIES ON COMMUNITY PLANNING AND DEVELOPMENT, THIS MONOGRAPH DISCUSSES THE STAGES IN THE PREPARATION AND IMPLEMENTATION OF COMPREHENSIVE URBAN SCHEMES. FIRST OF ALL, SOCIAL ACCEPTANCE, ECONOMIC, FEASIBILITY, POLITICAL RESPONSIBILITY, AND ENVIRONMENTAL SATISFACTION ARE VITAL TO SUCCESSFUL PLANNING. ORGANIZATION FOR…

  14. Researching into Learning Resources in Colleges and Universities. The Practical Research Series.

    Science.gov (United States)

    Higgins, Chris; Reading, Judy; Taylor, Paul

    This book examines issues and methods for conducting research into the educational resource environment in colleges and universities. That environment is defined as whatever is used to facilitate the learning process, including learning space, support staff, and teaching staff. Chapter 1 is an introduction to the series and lays out the process of…

  15. Invited series of talks and lectures at Yale University (USA) on Rolf Nordahl's research

    DEFF Research Database (Denmark)

    Nordahl, Rolf

    2010-01-01

    in several topics. The lectures will address his innovative experiments on using methods from Film and Filmsound to inform research in Computer Games and Virtual Reality applications with real-life examples from the Natural Interactive Walking (NIW) project - a EU-funded project headed at Aalborg University......Rolf Nordahl , Medialogy in Copenhagen, will be giving an invited series of lectures at Yale University, Connecticut, USA in the last week of March, 2010. Rolf has been invited to give talks to Professors, research fellows, Ph.D.'s and graduate students of Yale University (USA), on his research...

  16. Book Review: MACBETH, Danielle. Realizing Reason: A Narrative of Truth and Knowing. Oxford: Oxford University Press, 2014, 494 pp., $99.00 (hbk, ISBN 9780198704751

    Directory of Open Access Journals (Sweden)

    Matheus Valente

    Full Text Available ABSTRACT We review Danielle Macbeth's book Realizing Reason, published by Oxford University Press in 2014. This extensive book is composed by nine chapters in which Macbeth critically presents the development of mathematical practices in the Western world - from its founding in Ancient Greece's diagrammatic practices to the apogee of mathematical logic in the nineteenth and twentieth-centuries - while offering a revaluation of its present stage by means of a reconsideration of Gottlob Frege's philosophical contributions. In this review, we present a summary of each chapter's contents and make general considerations about them.

  17. Mime, Music and Drama on the Eighteenth-Century Stage. The Ballet d'Action. Edward Nye, Cambridge-New York, Cambridge University Press, 2011

    Directory of Open Access Journals (Sweden)

    Stefania Onesti

    2012-11-01

    Full Text Available Mime, Music and Drama on the Eighteenth-Century Stage by Edward Nye (Cambridge University Press, 2011 has the merit of inspiring a strong reflection on ballet d'action, connected with cultural, literaturary and philosophic environment of Eighteenth century. The author, with brilliant insight and careful historical research, explores the most debated issues of the new genre, providing an unusual interpretation. The review traces the focal points and the structure of the book, developing further consideration of some of the most challenging aspects offered by the text.

  18. Book received: Paul van den Akker, Looking for Lines: Theories of the Essence of Art and the Problem of Mannerism, Amsterdam: Amsterdam University Press 2010 including preface, contents and introduction.

    Directory of Open Access Journals (Sweden)

    Paul van den Akker

    2010-12-01

    Full Text Available Paul van den Akker, Looking for Lines: Theories of the Essence of Art and the Problem of Mannerism, Amsterdam: Amsterdam University Press 2010 including preface, contents and introduction.

  19. How to Find Optimal National Model of Pension System: the Projection on Russia (Book Review: Barr, N. Pension reform: A short guide [Text] / N. Barr, P. Diamond. – Oxford : Oxford University Press, 2010. – 261 p.

    Directory of Open Access Journals (Sweden)

    Karen Avakovich Tumanyants

    2015-12-01

    Full Text Available How to Find Optimal National Model of Pension System: the Projection on Russia (Book Review: Barr, N. Pension reform: A short guide [Text] / N. Barr, P. Diamond. – Oxford : Oxford University Press, 2010. – 261 p.

  20. Rune Frederiksen, Elizabeth R. Gebhard & Alexander Sokolicek (eds.), The Architecture of the Ancient Greek Theatre, Monographs of the Danish Institute, Volume 17 (Aarhus: Aarhus University Press and The Danish Institute at Athens, 2015)

    OpenAIRE

    William C. Miller

    2017-01-01

    A review of the book: Rune Frederiksen, Elizabeth R. Gebhard & Alexander Sokolicek (eds.), The Architecture of the Ancient Greek Theatre, Monographs of the Danish Institute, Volume 17 (Aarhus: Aarhus University Press and The Danish Institute at Athens, 2015)

  1. Steve Boardman and Julian Goodare, eds., Kings, Lords and Men in Scotland and Britain, 1300–1625: Essays in Honour of Jenny Wormald. Edinburgh: Edinburgh University Press, 2014. Pp. 368. ISBN: 9780748691500. £75.00.

    Directory of Open Access Journals (Sweden)

    Lucinda Dean

    2015-08-01

    Full Text Available Steve Boardman and Julian Goodare, eds., Kings, Lords and Men in Scotland and Britain, 1300–1625: Essays in Honour of Jenny Wormald. Edinburgh: Edinburgh University Press, 2014. Pp. 368. ISBN: 9780748691500. £75.00.

  2. C. Walker-Said and J. D. Kelly (eds), Corporate Social Responsibility? Human Rights in the New Global Economy (Chicago, IL: The University of Chicago Press, 2015), 392 pp

    DEFF Research Database (Denmark)

    Whelan, Glen

    2017-01-01

    Book review of: Charlotte Walker-Said and John D. Kelly (eds), Corporate Social Responsibility? Human Rights in the New Global Economy (Chicago, IL: The University of Chicago Press, 2015), 392 pp.......Book review of: Charlotte Walker-Said and John D. Kelly (eds), Corporate Social Responsibility? Human Rights in the New Global Economy (Chicago, IL: The University of Chicago Press, 2015), 392 pp....

  3. From the Aldine Press to Aldus@SFU: Showcasing Simon Fraser University Library’s Aldines Online

    OpenAIRE

    Bordini, Alessandra

    2017-01-01

    This report stems from a joint commemoration in 2015 of the fiftieth anniversary of the opening of Simon Fraser University and the five-hundredth anniversary of the death of pioneering Renaissance publisher and scholar Aldus Manutius. To mark these occasions, Publishing@SFU and SFU Library Special Collections joined forces to create a web-based resource comprising an outstanding selection of Aldines from the Wosk–McDonald collection, one of the largest such in North America. This report detai...

  4. Recenzja książki: James Evans, The history and practice of ancient astronomy, Oford University Press, 1998.

    OpenAIRE

    Dylewski, Jarosław

    2011-01-01

    Professor James Evans is a physicist working an University of Pudget Sound in the USA. His reseatch is focused on ancient astronomy and application of that knowledge. He also successfully attempted to build gnomon, astrolabe or analemna – instruments used in antuiquity and medieval times to make observations of celestial bodies. In his work, The History and Practice of Ancient Astronomy, professor Evans introduces the reader to the evolution of astronomical knowledge, from the simplest observ...

  5. [Book review] Cowbirds and Other Brood Parasites by Catherine Ortega. Tucson, Arizona: University of Arizona Press (1998). The Avian Brood Parasites: Deception at the Nest by Paul A. Johnsgard. New York: Oxford University Press (1997) Parasitic Birds and their Hosts: Studies in Coevolution edited by S.I. Rothstein & S.K. Robinson. New York: Oxford University Press (1998)

    Science.gov (United States)

    Hahn, D.C.

    1999-01-01

    We are in a golden age for the study of brood parasitism, judging from both the quantity and quality of recent scientific publications on cuckoos, cowbirds and parasitic finches by investigators working in Europe, the Americas, Africa and Asia. As Johnsgard (1997) remarks in his preface, the evolutionary, ecological, and behavioural questions posed by obligate brood parasites are among the most intriguing contemporary ornithological topics. Rothstein & Robinson (1998) explain that brood parasites make ideal subjects for testing the generality of models for the evolution of social and mating behaviour, foraging behaviour, spatial distribution, and vocal development, because the strategy of providing no parental care removes constraints imposed on other birds. Since Aristotle, people have been fascinated by brood parasites, but only in the past two decades has the number of investigators working on this topic reached a critical mass and created momentum that promises many breakthroughs. New studies are being completed so rapidly that a general book is inevitably out of date on some topics by the time it is published. A complete library on brood parasitism should add two recent volumes (Morrison et al. 1999; Smith et al., in press).to the three reviewed here.

  6. Quentin Skinner, Staten og friheten. Oslo: Res Publica, 2011. José Luis Martí and Philip Pettit, A Political Philosophy in Public Life. Civic Republicanism in Zapatero's Spain. Princeton: Princeton University Press, 2010 (Simon Laumann Jørgensen)

    DEFF Research Database (Denmark)

    Jørgensen, Simon Laumann

    2012-01-01

    Anmeldelse af Quentin Skinner, Staten og friheten, Oslo: Res Publica 2011, 199 NOK & José Luis Martí & Philip Pettit, A Political Philosophy in Public Life. Civic Republicanism in Zapatero’s Spain, Princeton: Princeton University Press 2010, $ 24.95......Anmeldelse af Quentin Skinner, Staten og friheten, Oslo: Res Publica 2011, 199 NOK & José Luis Martí & Philip Pettit, A Political Philosophy in Public Life. Civic Republicanism in Zapatero’s Spain, Princeton: Princeton University Press 2010, $ 24.95...

  7. Press Start

    Science.gov (United States)

    Harteveld, Casper

    This level sets the stage for the design philosophy called “Triadic Game Design” (TGD). This design philosophy can be summarized with the following sentence: it takes two to tango, but it takes three to design a meaningful game or a game with a purpose. Before the philosophy is further explained, this level will first delve into what is meant by a meaningful game or a game with a purpose. Many terms and definitions have seen the light and in this book I will specifically orient at digital games that aim to have an effect beyond the context of the game itself. Subsequently, a historical overview is given of the usage of games with a serious purpose which starts from the moment we human beings started to walk on our feet till our contemporary society. It turns out that we have been using games for all kinds of non-entertainment purposes for already quite a long time. With this introductory material in the back of our minds, I will explain the concept of TGD by means of a puzzle. After that, the protagonist of this book, the game Levee Patroller, is introduced. Based on the development of this game, the idea of TGD, which stresses to balance three different worlds, the worlds of Reality, Meaning, and Play, came into being. Interested? Then I suggest to quickly “press start!”

  8. Stochastic nonlinear time series forecasting using time-delay reservoir computers: performance and universality.

    Science.gov (United States)

    Grigoryeva, Lyudmila; Henriques, Julie; Larger, Laurent; Ortega, Juan-Pablo

    2014-07-01

    Reservoir computing is a recently introduced machine learning paradigm that has already shown excellent performances in the processing of empirical data. We study a particular kind of reservoir computers called time-delay reservoirs that are constructed out of the sampling of the solution of a time-delay differential equation and show their good performance in the forecasting of the conditional covariances associated to multivariate discrete-time nonlinear stochastic processes of VEC-GARCH type as well as in the prediction of factual daily market realized volatilities computed with intraday quotes, using as training input daily log-return series of moderate size. We tackle some problems associated to the lack of task-universality for individually operating reservoirs and propose a solution based on the use of parallel arrays of time-delay reservoirs. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Beyond the Soundtrack: Representing Music in Cinema, a cura di Daniel Goldmark, Lawrence Kramer e Richard Leppert, Berkeley, University of California Press, 2007

    Directory of Open Access Journals (Sweden)

    Francesco Finocchiaro

    2012-11-01

    Full Text Available Beyond the Soundtrack: Representing Music in Cinema (edited by Daniel Goldmark, Lawrence Kramer and Richard Leppert, Berkeley, University of California Press, 2007, viii-324 pp. offers sixteen essays of various authors about film music. These papers were presented in 2004 in a study congress at the University of Minnesota. In introducing the book, the editors assert an assumption, today broadly accepted: indeed they affirm, that music has traditionally been regarded as a subordinate element in cinematographic text: film music literature still has a marginal position in the much larger field of film studies which focuses on image, narrative, film history. In this theoretical and historiographic context, the expression “Beyond the Soundtrack” is meant to be more than a title: it is the manifesto of a conceptual shift. We can summarize this change in reconsidering the importance of film music, in order to understand a movie not only as a visual, but also as a musical medium. The change of paradigm brings renewed questions and completely new issues. If we abandon the assumption, at this point obsolete, that film music has a mere functional role, it will be necessary to ask not how to conceptualize the use of music in film, but rather how the film conceptualizes music: how films imagine music, how films represent music as an artistic and social phenomenon, and how films position music as an integral parts of a fictional world. Such questions aim to consider film music not as an atmospheric expedient, but «as an agent, a force, and an object engaged in ongoing negotiations with image, narrative, and context», as the editors assert at the very beginning of their book.

  10. Serie Legislacion Educativa Argentina, 1: Leyes Universitarias (Series on Educational Legislation of Argentian, 1: Laws Governing Universities).

    Science.gov (United States)

    Ministerio de Cultura y Educacion, Buenos Aires (Argentina). Centro National de Documentacion e Informacion Educativa.

    This document contains the laws governing national, private, and state universities in Argentina. The texts of the laws for each sector are contained, covering objectives, general administration, academic organization, students, and finances. (VM)

  11. Child Maltreatment; Types and effects: Series of six cases from a university hospital in Oman

    Directory of Open Access Journals (Sweden)

    Muna Al-Saadoon

    2012-02-01

    Full Text Available Child maltreatment (CM is common worldwide, and can take many forms. It may even endanger the child’s life, especially when younger children are the victims. CM affects the child’s quality of life and consequently leads to long term issues to be dealt with by the child, family and community. This case series discusses six children who have been subjected to CM, and diagnosed by the child protection team of the departments of Child Health and Behavioural Medicine at Sultan Qaboos University Hospital (SQUH, Oman. The aim of this case series is to increase the level of awareness of CM among Oman’s medical professionals and to highlight the difficulties encountered in diagnosing and providing optimal care for these children. Although treatment is provided in Oman’s health care system, it is clear that there are gaps in the existing system which affect the quality of child protection services provided to the children and their families.

  12. Casa mea cetatea mea. Recenzie la cartea - Mette Svart Kristiansen, Kate Giles (eds, Dwellings, Identities and Homes. European Housing Culture from the Viking Age to the Renaissance, Jutland Archaeological Society, Aarhus University Press, 2014

    Directory of Open Access Journals (Sweden)

    Sergiu Musteata

    2015-12-01

    Full Text Available Review of the book - Casa mea cetatea mea. Recenzie la cartea - Mette Svart Kristiansen, Kate Giles (eds, Dwellings, Identities and Homes. European Housing Culture from the Viking Age to the Renaissance, Jutland Archaeological Society, Aarhus University Press, 2014

  13. Rune Frederiksen, Elizabeth R. Gebhard & Alexander Sokolicek (eds., The Architecture of the Ancient Greek Theatre, Monographs of the Danish Institute, Volume 17 (Aarhus: Aarhus University Press and The Danish Institute at Athens, 2015

    Directory of Open Access Journals (Sweden)

    William C. Miller

    2017-03-01

    Full Text Available A review of the book: Rune Frederiksen, Elizabeth R. Gebhard & Alexander Sokolicek (eds., The Architecture of the Ancient Greek Theatre, Monographs of the Danish Institute, Volume 17 (Aarhus: Aarhus University Press and The Danish Institute at Athens, 2015

  14. Nopcsa, Baron Franz. 2014. Traveler, Scholar, Politician, Adventurer – A Transylvanian Baron at the Birth of Albanian Independence (ed. and trans. from German Robert Elsie. Budapest: Central European University Press. 227 pp.

    Directory of Open Access Journals (Sweden)

    David Mandler

    2015-01-01

    Full Text Available Nopcsa, Baron Franz. 2014. Traveler, Scholar, Politician, Adventurer – A Transylvanian Baron at the Birth of Albanian Independence (ed. and trans. from German Robert Elsie. Budapest: Central European University Press. 227 pp.  Reviewed by David Mandler, Independent Scholar

  15. Development of a fused glass disc XRF facility and comparison with the pressed powder pellet technique at Instituto de Geociencias, Sao Paulo University, Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Mori, Paulo Ernesto; Correia, Ciro Teixeira [Sao Paulo Univ., SP (Brazil). Dept. of Mineralogia e Geotectonia; Reeves, Shane [Melbourne Univ., Parkville, VIC (Australia). School of Earth Sciences; Haukka, Maunu [Melbourne Univ., Parkville, VIC (Australia). Dept. of Chemical Engineering

    1999-09-01

    An X-ray fluorescence spectrometry pressed powder pellet technique (PPP) currently in use at the X-ray facility of the Instituto de Geociencias, Sao Paulo University has been extended to include additional elements and complemented by a full major and trace element calibration by fused glass disc X-ray fluorescence. A total of 38 major and trace elements are available (F, Na, Mg, Al, Si, P, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Rb, Sr, Y, Zr, Nb, Mo, Sn, Sb, Ba, Pb, Bi, La, Ce, Nd, Th and U) with variable detection limits, but generally below 10 ppm for trace elements. Loss-on-ignitions determined by weight difference and totals provide extremely good control on data quality. A full analysis, including background, matrix correction and all relevant corrections can be achieved automatically in less than 60 minutes. Virtually any sample matrix can be accommodated. The data support the view that fused disc and power pellet techniques are complementary and together provide a definite, rigorous XRF analysis. However, both techniques require considerable attention to details, with the glass disc technique prone to losses of F and S and increase detection limits for certain elements. The powder pellet technique requires fine micronizing and caution when dealing with the light elements Si and Al. Additionally the paper presents a new, previously unpublished experimentally determined Alpha coefficients for all matrix-corrected elements, which are based on the lithium metaborate system and contrast with the Philips theoretical alpha coefficients. (author)

  16. Development of a fused glass disc XRF facility and comparison with the pressed powder pellet technique at Instituto de Geociencias, Sao Paulo University, Brazil

    International Nuclear Information System (INIS)

    Mori, Paulo Ernesto; Correia, Ciro Teixeira; Reeves, Shane; Haukka, Maunu

    1999-01-01

    An X-ray fluorescence spectrometry pressed powder pellet technique (PPP) currently in use at the X-ray facility of the Instituto de Geociencias, Sao Paulo University has been extended to include additional elements and complemented by a full major and trace element calibration by fused glass disc X-ray fluorescence. A total of 38 major and trace elements are available (F, Na, Mg, Al, Si, P, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Rb, Sr, Y, Zr, Nb, Mo, Sn, Sb, Ba, Pb, Bi, La, Ce, Nd, Th and U) with variable detection limits, but generally below 10 ppm for trace elements. Loss-on-ignitions determined by weight difference and totals provide extremely good control on data quality. A full analysis, including background, matrix correction and all relevant corrections can be achieved automatically in less than 60 minutes. Virtually any sample matrix can be accommodated. The data support the view that fused disc and power pellet techniques are complementary and together provide a definite, rigorous XRF analysis. However, both techniques require considerable attention to details, with the glass disc technique prone to losses of F and S and increase detection limits for certain elements. The powder pellet technique requires fine micronizing and caution when dealing with the light elements Si and Al. Additionally the paper presents a new, previously unpublished experimentally determined Alpha coefficients for all matrix-corrected elements, which are based on the lithium metaborate system and contrast with the Philips theoretical alpha coefficients. (author)

  17. Myths About Press Freedom

    Directory of Open Access Journals (Sweden)

    Kaarle Nordenstreng

    2007-06-01

    Full Text Available This article intends to rectify three popular beliefs related to press freedom: (1 that the idea of a free marketplace of ideas with a self-righting truth belongs to original liberalism, (2 that UNESCO’s primary mission is to promote freedom of information, and (3 that the Universal Declaration of Human Rights provides legal safeguards for the media. These beliefs are shown, on the basis of the legacy of liberalism and documents of the international community, to be misleading myths. Instead of accurate readings of the idea of freedom, they serve as ideological positions which are harmful to democracy. The Millennium Declaration provides further proof that the international community has a much more balanced view of freedom of information than that typically held by media professionals. Therefore it is important to liberate the concept of press freedom from its ideological baggage.

  18. Determination of non-ionizing radiation dose in Tun Seri Lanang Library (PTSL), Universiti Kebangsaan Malaysia

    International Nuclear Information System (INIS)

    Nur Farhana Mohd Aisa

    2012-01-01

    Application of non-ionizing radiation in life is growing along with the technological developments. This study was conducted to measure and map the contours of non-ionizing radiation transmission station in Tun Seri Lanang Library, Universiti Kebangsaan Malaysia. This study was conduct with the use of RF EMF Strength Meter. There was five base stations in the study area and six contours were mapped at each transmitter station and the distance of each contour are 5 meters and the distance between base stations and the final contour are 30 meters. There were eight points that were measure at every contour and every point was monitor three times at three different times; in the morning, afternoon and night for four weeks. This study has found that the reading of radiofrequency within the contour of the study was lower than the reading set by the Malaysian Communications and Multimedia Commission (MCMC), which is 0.14 % in the morning, 0.155 % in the evening and 0.159 % at night than the limit 450 x 10 4 μW/ m 2 . Previous studies showed that the reading of the radiofrequency is only 0.04 % than the limit value. Weather does not effect the frequency reading and the highest readings are in the evening where it is peak hours in the use of telecommunications equipment. In conclusion, the radio frequencies generated by the transmitting stations in the study area are not dangerous to the public who live or work near the area. (author)

  19. forecasting with nonlinear time series model: a monte-carlo

    African Journals Online (AJOL)

    PUBLICATIONS1

    erated recursively up to any step greater than one. For nonlinear time series model, point forecast for step one can be done easily like in the linear case but forecast for a step greater than or equal to ..... London. Franses, P. H. (1998). Time series models for business and Economic forecasting, Cam- bridge University press.

  20. Resourse Allocation and Pricing Principles for a University Computer Centre. Working Paper Series Number 6819.

    Science.gov (United States)

    Possen, Uri M.; And Others

    As an introduction, this paper presents a statement of the objectives of the university computing center (UCC) from the viewpoint of the university, the government, the typical user, and the UCC itself. The operating and financial structure of a UCC are described. Three main types of budgeting schemes are discussed: time allocation, pseudo-dollar,…

  1. Universe

    CERN Document Server

    2009-01-01

    The Universe, is one book in the Britannica Illustrated Science Library Series that is correlated to the science curriculum in grades 5-8. The Britannica Illustrated Science Library is a visually compelling set that covers earth science, life science, and physical science in 16 volumes.  Created for ages 10 and up, each volume provides an overview on a subject and thoroughly explains it through detailed and powerful graphics-more than 1,000 per volume-that turn complex subjects into information that students can grasp.  Each volume contains a glossary with full definitions for vocabulary help and an index.

  2. Children of Trauma: Stressful Life Events and Their Effects on Children and Adolescents. International Universities Press Stress and Health Series. Monograph 8.

    Science.gov (United States)

    Miller, Thomas W., Ed.

    Clinical theory and practice models are provided along with current concepts in diagnosis and treatment. Theoretical formulations, hypotheses, issues, and implications related to life stress measurement are addressed and applied to medical and mental health concerns. Contributions include: (1) "Stress Response and Adaptation in Children:…

  3. News/Press Releases

    Data.gov (United States)

    Office of Personnel Management — A press release, news release, media release, press statement is written communication directed at members of the news media for the purpose of announcing programs...

  4. Measuring the Quality of Life of University Students. Research Monograph Series. Volume 1.

    Science.gov (United States)

    Roberts, Lance W.; Clifton, Rodney A.

    This study sought to develop a valid set of scales in the cognitive and affective domains for measuring the quality of life of university students. In addition the study attempted to illustrate the usefulness of Thomas Piazza's procedures for constructing valid scales in educational research. Piazza's method involves a multi-step construction of…

  5. Universal Esperanto Association. Annual Report 1975-1976. Esperanto Documents, New Series, No. 10A.

    Science.gov (United States)

    Universal Esperanto Association, Rotterdam (Netherlands).

    The Universal Esperanto Association publishes an annual report each year, covering April-to-April, in Esperanto. This volume presents an edited English summary of the 1975-1976 report, the aim of which is to describe UEA activities and to inform the non-speaker of the language and culture of Esperanto as they relate to the UEA's program. The…

  6. Leading the Campaign: Advancing Colleges and Universities. The ACE Series on Higher Education

    Science.gov (United States)

    Worth, Michael J.

    2010-01-01

    The ability to lead a campaign is essential to success for today's college or university president. And campaign experience at some level is generally now a prerequisite credential for presidential candidates, as well as deans and other academic leaders, on both public and private campuses. This book discusses fundamental campaign principles, but…

  7. Harvard University: Green Loan Fund. Green Revolving Funds in Action: Case Study Series

    Science.gov (United States)

    Foley, Robert

    2011-01-01

    The Green Loan Fund at Harvard University has been an active source of capital for energy efficiency and waste reduction projects for almost a decade. This case study examines the revolving fund's history from its inception as a pilot project in the 1990s to its regeneration in the early 2000s to its current operations today. The green revolving…

  8. Stanford University: The Building Energy Retrofit Programs. Green Revolving Funds in Action: Case Study Series

    Science.gov (United States)

    Flynn, Emily

    2011-01-01

    Stanford University's Energy Retrofit Program was created in 1993 to target resource reduction and conservation focused projects on campus. Fahmida Ahmed, Associate Director of the Department of Sustainability and Energy Management, says that Stanford has been investing in sustainability and energy-efficiency since the late 1970s, longer than many…

  9. Western Michigan University: Quasi-Revolving Fund. Green Revolving Funds in Action: Case Study Series

    Science.gov (United States)

    Billingsley, Christina

    2011-01-01

    Western Michigan University has designed an innovative "Quasi-Revolving Fund" model that demonstrates the institution's full commitment to incorporating sustainability into campus operations. The Quasi-Revolving Fund recaptures money from cost-savings, similar to a typical green revolving fund, but it also sources capital from the…

  10. The Expanding Universe: Time, Space and Spirit--Keys to Scientific Literacy Series.

    Science.gov (United States)

    Stonebarger, Bill

    Nearly every culture has made important discoveries about the universe. Most cultures have searched for a better understanding of the cosmos and how the earth and human life relate. The discussion in this booklet considers time, space, and spirit. Time refers to a sense of history; space refers to geography; and spirit refers to life and thought.…

  11. Holding Colleges and Universities Accountable for Meeting State Needs. Challenge to Lead Series

    Science.gov (United States)

    Diaz, Alicia A.; Lord, Joan; Marks, Joseph L.

    2006-01-01

    Kentucky, Oklahoma, and Tennessee have given all the Southern Regional Education Board (SREB) states a new tool to help focus their colleges and universities on state needs. These three states have created plans for their higher education institutions by drawing on leadership from a broad range of state agencies. They identified state needs and…

  12. Communicators take nine Virginia Press Women awards

    OpenAIRE

    Owczarski, Mark

    2008-01-01

    Three Virginia Tech communicators have won Virginia Press Women awards. The winners - Susan Trulove, research division communications manager; Clara Cox, university publications director; and Heather Riley Chadwick, College of Architecture and Urban Studies communication manager - were announced at the Virginia Press Women Annual Spring Conference in Staunton, Va.

  13. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2010-01-01

    The WordPress Bible provides a complete and thorough guide to the largest self hosted blogging tool. This guide starts by covering the basics of WordPress such as installing and the principles of blogging, marketing and social media interaction, but then quickly ramps the reader up to more intermediate to advanced level topics such as plugins, WordPress Loop, themes and templates, custom fields, caching, security and more. The WordPress Bible is the only complete resource one needs to learning WordPress from beginning to end.

  14. Case series of child sexual abuse: Abia State University Teaching Hospital experience.

    Science.gov (United States)

    Okoronkwo, N C; Ejike, O

    2014-01-01

    Child sexual abuse remains a serious infringement on the rights of the child. Though it appears to be viewed less seriously among adolescents, the consequences may be more severe and less obvious for the younger child. Age of the child appears notto be a deterrent. There is paucity of local data in the sub-region on this important social problem. The circumstance surrounding child sexual abuse in our environment needs to be reviewed. This study sets out to evaluate the characteristics of victims of child sexual abuse and to proffer solutions on how to stem the tide of the crime. To examine the characteristics of sexually abused children presenting to the paediatrics department of Abia State UniversityTeaching hospital, Aba. The case records of 10 consecutive cases of sexually abused children that presented to the Children Outpatient Department of Abia State University Teaching Hospital (ABSUTH) Aba, from January to June 2006 were prospectively reviewed and the parents/child/abuser interviewed where possible. All the victims were females aged 3-11 yrs, while all the abusers were males 14-29 yrs. Both parties were of low socio-economic class. 50% of the victims reported the incident. Mental and psychological state of the perpetrators appears to be a factor. Physical injuries to the vulva-vaginal areas were common. This study shows that child sexual abuse may not be uncommon in our environment. The exact prevalence remains unknown.The perpetrators of child sexual abuse should be prosecuted as a deterrent and rehabilitated whenever possible.

  15. Hot-pressed geopolymer

    DEFF Research Database (Denmark)

    Ranjbar, Navid; Mehrali, Mohammad; Maheri, Mahmoud R.

    2017-01-01

    This research explores the use of simultaneous heating and pressing techniques in order to enhance the mechanical properties of fly ash (FA) based geopolymer under relatively low temperature conditions to ensure minimum-porosity. Four effective parameters of pressing force, alkali activator...

  16. Exploration in American Archaeology: Essays in Honor of Wesley R. Hurt. edited by Mark G. Plew, University Press of America, Lanham, 1999

    Directory of Open Access Journals (Sweden)

    David L. Browman

    2000-05-01

    Full Text Available This volume contains a short 6 page history of the contributions ofWesley Robert Hurt, Jr., to Americanist archaeology,along with a 4 page 'selected' list of his publications. The review starts with his career in the Southwest, traces the shift in his research to the Plains, and especially South Dakota, and then turns to his later change of interest to South America (especially Colombia, Brazil and Uru­guay. Hurt was born September 20, 1 9 1 7 in New Mexico, and got into archaeology through his cousin, Reginald Fisher, who was working for Dr. Edgar L. Heweu. Hurt started out taking Heweu's Chaco Canyon Field School, and began working on the Jemez Archaeological project as a high school student in the 1930s. After graduating from the University of New Mexico in 1938, he worked from 1938 to 1940 as a WPAArchaeology Project supervisor on Southwest projects, and in 1941 served as the Na­tional Park Service archaeologist at Canyon de Chelly National Monument.

  17. WordPress Bible

    CERN Document Server

    Brazell, Aaron

    2011-01-01

    Get the latest word on the biggest self-hosted blogging tool on the marketWithin a week of the announcement of WordPress 3.0, it had been downloaded over a million times. Now you can get on the bandwagon of this popular open-source blogging tool with WordPress Bible, 2nd Edition. Whether you're a casual blogger or programming pro, this comprehensive guide covers the latest version of WordPress, from the basics through advanced application development. If you want to thoroughly learn WordPress, this is the book you need to succeed.Explores the principles of blogging, marketing, and social media

  18. Two layer powder pressing

    International Nuclear Information System (INIS)

    Schreiner, H.

    1979-01-01

    First, significance and advantages of sintered materials consisting of two layers are pointed out. By means of the two layer powder pressing technique metal powders are formed resulting in compacts with high accuracy of shape and mass. Attributes of basic powders, different filling methods and pressing techniques are discussed. The described technique is supposed to find further applications in the field of two layer compacts in the near future

  19. BORTONI-Ricardo, Stella M. The urbanization of rural dialect speakers: a sociolinguistic study in Brazil. Cambridge: Cambridge University Press, 1985. 265p. BORTONI-Ricardo, Stella M. The urbanization of rural dialect speakers: a sociolinguistic study in Brazil. Cambridge: Cambridge University Press, 1985. 265p.

    Directory of Open Access Journals (Sweden)

    Maria Jandyra Cunha

    2008-04-01

    Full Text Available Quais são os principais fatores em ação na preservção das variedades linguisticas rurais e/ou não padrão no Brasil? Seria a sua manutenção simplesmente o resultado do analfabetismo ou da marginalização social ou geografica? Os dialetos retrocedem a medida que a população ganha acesso a educação formal? Até que ponto há uma ideologia de prestigio operando entre a chamada população marginal? Até que ponto a tendência homogeneizadora da sociedade urbana oscila entre duas forças contrarias: de um lado as pressões de uma padronização, de outro a manutengao das formas não-padrão como baluartes de identidades grupais?

  20. The small academic press in the land of giants

    Directory of Open Access Journals (Sweden)

    Frances Pinter

    2015-11-01

    Full Text Available Mergers and acquisitions, for example the merger of Macmillan Science and Education with Springer Science+Business Media, might suggest that large is the future for academic publishing.  It might seem that giant players will dominate the future of scholarly publishing, but, at the same time, this year has seen the launch of UCL Press, the University’s in-house publishing arm. Goldsmiths, University of London, has also announced it is preparing to launch Goldsmiths Press, a new university press built on digital-first publishing, especially around unconventional projects traditionally excluded by publishers. Some of the more established university presses also seem to be increasing their scope. For example, Stanford University Press launched a new trade imprint and Manchester University Press has announced it has acquired forward titles from Bloomsbury Publishing.  'Insights 'asked two experts if there really is scope for the small academic press in the modern scholarly publishing environment. Frances Pinter has provided the perspective of the small university press. She is realistic about the challenges small academic publishers face, but concludes that there is space and opportunity for them to coexist with the giants. Michael Magoulias is equally realistic about the challenges of small, but sees the university press as a necessary, not to say, vital, alternative to commercial publishing.

  1. Seeking a Roadmap to Becoming World Class: Strategic Planning at Peking University. Research & Occasional Paper Series: CSHE.11.13

    Science.gov (United States)

    Guangkuan, Xie

    2013-01-01

    Strategic planning plays an important but sometimes controversial role in higher education. This paper examines how strategic planning works in Chinese universities, using Peking University as a case study. This essay discusses the rationale for why Peking University (PKU) decided to pursue status as a world-class university along with objectives…

  2. Computer-science guest-lecture series at Langston University sponsored by the U.S. Geological Survey; abstracts, 1992-93

    Science.gov (United States)

    Steele, K. S.

    1994-01-01

    Langston University, a Historically Black University located at Langston, Oklahoma, has a computing and information science program within the Langston University Division of Business. Since 1984, Langston University has participated in the Historically Black College and University program of the U.S. Department of Interior, which provided education, training, and funding through a combined earth-science and computer-technology cooperative program with the U.S. Geological Survey (USGS). USGS personnel have presented guest lectures at Langston University since 1984. Students have been enthusiastic about the lectures, and as a result of this program, 13 Langston University students have been hired by the USGS on a part-time basis while they continued their education at the University. The USGS expanded the offering of guest lectures in 1992 by increasing the number of visits to Langston University, and by inviting participation of speakers from throughout the country. The objectives of the guest-lecture series are to assist Langston University in offering state-of-the-art education in the computer sciences, to provide students with an opportunity to learn from and interact with skilled computer-science professionals, and to develop a pool of potential future employees for part-time and full-time employment. This report includes abstracts for guest-lecture presentations during 1992-93 school year.

  3. ALUMINUM BOX BUNDLING PRESS

    Directory of Open Access Journals (Sweden)

    Iosif DUMITRESCU

    2015-05-01

    Full Text Available In municipal solid waste, aluminum is the main nonferrous metal, approximately 80- 85% of the total nonferrous metals. The income per ton gained from aluminum recuperation is 20 times higher than from glass, steel boxes or paper recuperation. The object of this paper is the design of a 300 kN press for aluminum box bundling.

  4. DSS / Press Room

    Science.gov (United States)

    Defense Security Service, U.S. Department of Defense Site Map | A-Z Index | Facebook | Twitter Locations Press Room Organizational Structure Careers at DSS Doing Business with DSS Frequently Asked Classification System (NCCS) National Industrial Security System (NISS) ODAA Business Management System (OBMS

  5. OAS :: Press Releases

    Science.gov (United States)

    subscriptions Videos Photos Live Webcast Social Media Facebook @oasofficial Facebook Twitter @oas_official Social Media Facebook Twitter Newsletters Press and Communications Department Contact us at: +1 (202) 370 Rights Actions against Corruption C Children Civil Registry Civil Society Contact Us Culture Cyber

  6. bbPress complete

    CERN Document Server

    Wynne, Rhys

    2013-01-01

    A concise guide, written in an easy-to-follow format.This book is aimed at ambitious website or blog owners looking to add a forum to their site quickly and easily. Basic experience in WordPress and with managing a website is expected. Knowledge of HTML and PHP will be a bonus, though it isn't necessary.

  7. Multifractality, imperfect scaling and hydrological properties of rainfall time series simulated by continuous universal multifractal and discrete random cascade models

    Directory of Open Access Journals (Sweden)

    F. Serinaldi

    2010-12-01

    Full Text Available Discrete multiplicative random cascade (MRC models were extensively studied and applied to disaggregate rainfall data, thanks to their formal simplicity and the small number of involved parameters. Focusing on temporal disaggregation, the rationale of these models is based on multiplying the value assumed by a physical attribute (e.g., rainfall intensity at a given time scale L, by a suitable number b of random weights, to obtain b attribute values corresponding to statistically plausible observations at a smaller L/b time resolution. In the original formulation of the MRC models, the random weights were assumed to be independent and identically distributed. However, for several studies this hypothesis did not appear to be realistic for the observed rainfall series as the distribution of the weights was shown to depend on the space-time scale and rainfall intensity. Since these findings contrast with the scale invariance assumption behind the MRC models and impact on the applicability of these models, it is worth studying their nature. This study explores the possible presence of dependence of the parameters of two discrete MRC models on rainfall intensity and time scale, by analyzing point rainfall series with 5-min time resolution. Taking into account a discrete microcanonical (MC model based on beta distribution and a discrete canonical beta-logstable (BLS, the analysis points out that the relations between the parameters and rainfall intensity across the time scales are detectable and can be modeled by a set of simple functions accounting for the parameter-rainfall intensity relationship, and another set describing the link between the parameters and the time scale. Therefore, MC and BLS models were modified to explicitly account for these relationships and compared with the continuous in scale universal multifractal (CUM model, which is used as a physically based benchmark model. Monte Carlo simulations point out

  8. Review of F. SAN VICENTE et al. (eds., “Perfiles para la historia y crítica de la gramática del español en Italia: siglos XIX y XX. Confluencia y cruces de tradiciones gramaticográficas”, Bolonia, Bononia University Press, 2014

    Directory of Open Access Journals (Sweden)

    Natalia Peñín Fernández

    2015-06-01

    Full Text Available Félix SAN VICENTE et al. (eds., “Perfiles para la historia y crítica de la gramática del español en Italia: siglos XIX y XX. Confluencia y cruces de tradiciones gramaticográficas”, Bolonia, Bononia University Press, 2014 [Book Review

  9. Progress in hot pressing

    International Nuclear Information System (INIS)

    Brodhag, C.; Thevenot, F.

    1988-01-01

    An experimental technique is described to study hot pressing of ceramics under conditions of controlled temperature and pressure during both the heating and final sintering stages. This method gives a better control of the final microstructure of the material. Transformation mechanisms can be studied during initial heating stage (impurity degasing, reaction, phase transformation, mechanical behavior of intergranular phase...) using computer control and graphical data representations. Some examples will be given for different systems studied in our laboratory: B (α, β, amorphous), B 12 O 2 (reaction of B + B 2 O 3 ), Si 3 N 4 ( + additives), TiN, Al 2 O 3 + AlON,ZrC

  10. Distance and Campus Universities: Tensions and Interactions. A Comparative Study of Five Countries. Issues in Higher Education Series.

    Science.gov (United States)

    Guri-Rosenblit, Sarah

    This book compares the emergence and development of autonomous, fully fledged distance teaching universities in the higher education systems of the United Kingdom, Germany, Spain, Canada, and Israel. It examines the evolution and functional roles of these universities and outlines their commonalties and divergences. Main lessons are synthesized…

  11. ISS Expedition 08 Press Kit

    Data.gov (United States)

    National Aeronautics and Space Administration — Press kit for ISS mission Expedition 08 from 10/2003-04/2004. Press kits contain information about each mission overview, crew, mission timeline, benefits, and media...

  12. WordPress multisite administration

    CERN Document Server

    Longren, Tyler

    2013-01-01

    This is a simple, concise guide with a step-by-step approach, packed with screenshots and examples to set up and manage a network blog using WordPress.WordPress Multisite Administration is ideal for anyone wanting to familiarize themselves with WordPress Multisite. You'll need to know the basics about WordPress, and having at least a broad understanding of HTML, CSS, and PHP will help, but isn't required.

  13. Four Theories of the Press.

    Science.gov (United States)

    Siebert, Fred S.; And Others

    A systematic understanding of the press requires an understanding of the social and political structures within which the press operates. This book discusses four theories that have determined the kind of press the Western world has had: authoritarian, libertarian, socially responsible, and Soviet communist. Each chapter discusses press…

  14. University of Tennessee deploys force10 C-series to analyze data from CERN's Large Hadron Collider

    CERN Multimedia

    2007-01-01

    "Force20 networks, the pioneer in building and securing reliable networks, today announced that the University of Tennessee physics department has deployed the C300 resilient switch to analyze data form CERN's Large Hadron Collider." (1 page)

  15. Which Freedom of the Press?

    DEFF Research Database (Denmark)

    Rytter, Jens Elo

    2010-01-01

    The article surveys the historical and current meaning of "Freedom of the Press" in constitutional and human rights law. Two different conceptions exist, the narrow one defining freedom of the press as the freedom of every one to publish without prior restraint, the broader one defining it as a...... privileged freedom of the organised press to gather and report on information of public interest. These two conceptions have very different answers to the question of whether the press should enjoy some privilege to be exempt from ordinary legislation when such legislation restricts the access of the press to inform...

  16. WordPress for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2014-01-01

    The bestselling WordPress guide, fully updated to cover the 2013 enhancements WordPress has millions of users, and this popular guide has sold more than 105,000 copies in its previous editions. With the newest releases of WordPress, author and WordPress expert Lisa Sabin-Wilson has completely updated the book to help you use and understand all the latest features. You'll learn about both the hosted WordPress.com version and the more flexible WordPress.org, which requires third-party hosting. Whether you're switching to WordPress from another blogging platform or just beginning to blog, you'll

  17. Valores de pressão arterial e suas associações com fatores de risco cardiovasculares em servidores da Universidade de Brasília Blood pressure levels and their association with cardiovascular risk factors among employees of the University of Brasília, a Brazilian public university

    Directory of Open Access Journals (Sweden)

    Tatiana Valverde da Conceição

    2006-01-01

    Full Text Available OBJETIVO: Verificar e classificar, de acordo com o JNC 7, os níveis de pressão arterial dos servidores acima de quarenta anos da Universidade de Brasília, e estimar a prevalência de fatores de risco cardiovasculares presentes em tal população. MÉTODOS: Foi realizado um estudo transversal na Universidade de Brasília, onde os servidores acima de quarenta anos responderam a um questionário e tiveram pressão arterial, peso e altura medidos. Os níveis de pressão arterial foram classificados de acordo com o JNC 7 e os dados demográficos dos indivíduos de cada categoria foram analisados. A porcentagem dos fatores de risco foi calculada. A análise estatística foi feita através do teste ANOVA e do teste qui-quadrado, quando aplicável. RESULTADOS: Setecentos e quatro servidores participaram do estudo, incluindo 438 homens e 266 mulheres. A mediana de idade foi 47 anos. Segundo o JNC 7, 139 (19,8% pessoas foram classificadas como normotensas; 298 (42,3% como pré-hipertensas e 267 (37,9% como hipertensas. Os fatores de risco avaliados foram sobrepeso/obesidade (56,8%, tabagismo (19,5%, consumo de bebidas alcoólicas (53,6%, sedentarismo (48,4% e hipertensão (37,9%. CONCLUSÃO: A alta freqüência de níveis pressóricos elevados e fatores de risco cardiovasculares apontam para a necessidade de medidas preventivas e terapêuticas de doenças cardiovasculares direcionadas aos servidores da universidade.OBJECTIVE: To verify and classify, according to the JNC 7, the blood pressure levels (BPL of the employees of University of Brasilia, a public university in Brazil, who are older than 40 years of age, and to estimate the prevalence of cardiovascular risk factors in this population. METHODS: A cross-sectional study was conducted at the University of Brasilia, with employees over 40 years of age. They answered a questionnaire and had their blood pressure, weight and height measured. The BPLs were classified according to the JNC 7

  18. Popular Music: A Selected Bibliography of Materials in the California State University, Sacramento Library. Bibliographic Series No. 22.

    Science.gov (United States)

    Smith, Donna Ridley, Comp.

    The bibliography lists over 400 works in the California State University Library, Sacramento, on pop, rock, country, folk, blues, and soul music from 1950 to the present. Books, periodicals, and non-book materials noted in the bibliography are appropriate for history, communication studies, and popular culture studies as well as for music. Items…

  19. Seeking Sustainable Public Universities: The Legacy of the Great Recession. Research & Occasional Paper Series: CSHE.10.11

    Science.gov (United States)

    Lyall, Katharine

    2011-01-01

    The business models under which most public universities in the U.S. operate have become unsustainable. They were put in place when state economies were stronger and there were fewer programs making competing claims on state funds. The current Great Recession has made things worse, but the unsustainability of current business models derives from…

  20. Provincial Coordination and Inter-Institutional Collaboration in British Columbia's College, University College and Institute System. Monograph Series.

    Science.gov (United States)

    Gaber, Devron

    This document addresses a study that aimed to better understand the historical development of British Columbia community college, university college, and institute system with special attention given to recent changes in inter-institutional collaboration in relation to provincial coordination. The study also addresses centralization and…

  1. University of Colorado at Boulder: Energy and Climate Revolving Fund. Green Revolving Funds in Action: Case Study Series

    Science.gov (United States)

    Caine, Rebecca

    2012-01-01

    The University of Colorado at Boulder's student run Environmental Center leads the campus' sustainability efforts. The Center created the Energy and Climate Revolving Fund (ECRF) in 2007 to finance energy-efficiency upgrades. The ECRF functions as a source of funding for project loans and provides a method of financing projects that seeks to save…

  2. Paulo Freire on Higher Education: A Dialogue at the National University of Mexico. SUNY Series, Teacher Empowerment and School Reform.

    Science.gov (United States)

    Escobar, Miguel; And Others

    This volume presents a dialogue in 1984 between internationally recognized philosopher/educator, Paulo Freire, and Miguel Escobar, Alfredo L. Fernandez, and Gilberto Guevara-Niebla, educators at the National University of Mexico, on educational emancipation and the role of higher education. The dialogues address the relationships between education…

  3. Returns to Investment in Ontario University Education, 1960-1990, and Implications for Tuition Fee Policy. Discussion Series, Issue 5.

    Science.gov (United States)

    Stager, David A. A.

    This analysis of Ontario's returns to investment and implications for tuition fee policy updates a 1989 publication titled "Focus on Fees." The paper examines: data on public and private return on investment (ROI) from university education, pattern of ROI rates over time, and impact of tuition fee levels on estimated ROI for various…

  4. Macro-Environmental Mapping of International Branch Campus Activities of Universities Worldwide. Research & Occasional Paper Series: CSHE.2.14

    Science.gov (United States)

    Kosmützky, Anna; Krücken, Georg

    2014-01-01

    The paper provides an initial international comparative empirical assessment of international branch campuses (IBCs) worldwide. Building on neo-institutional theory and organizational ecology, it sheds light on the new organizational form by analyzing their founding age of the home university and IBC mortality. Furthermore the paper analyzes the…

  5. Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

    Science.gov (United States)

    Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

    2012-01-01

    Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

  6. FROM THE CHINESE PRESS

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    Discoverer of the Origin of Life The origin of life on earth has long been a subject explored by scientists around the world. At the 11th International Conference on the Origin of Life held at Orleans University in France on July 9th, 1996, Chinese scientist Zhao Yufen and her partner Cao Peisheng announced the contents of the origin of the seed of life.

  7. Direct drive digital servo press with high parallel control

    Science.gov (United States)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  8. WordPress For Dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2011-01-01

    The bestselling guide to WordPress, fully updated to help you get your blog going! Millions of bloggers rely on WordPress, the popular, free blogging platform. This guide covers all the features and improvements in the most up-to-date version of WordPress. Whether you are switching to WordPress from another blogging platform or just starting your first blog, you'll find the advice in this friendly guide gets you up to speed on both the free-hosted WordPress.com version and WordPress.org, which requires the purchase of web hosting services, and figure out which version is best for you. You'll b

  9. WordPress Top Plugins

    CERN Document Server

    Corbin, Brandon

    2010-01-01

    Time flies when you're having fun. This is the right way to describe this WordPress Top Plugins book by Brandon Corbin. With real world examples and by showing you the perks of having these plugins installed on your websites, the author is all set to captivate your interest from start to end. Regardless of whether this is your first time working with WordPress, or you're a seasoned WordPress coding ninja, WordPress Top Plugins will walk you through finding and installing the best plugins for generating and sharing content, building communities and reader base, and generating real advertising r

  10. Indre spenninger og ytre press

    DEFF Research Database (Denmark)

    Ibsen, Bjarne

    2011-01-01

    Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles.......Anmeldelse af bogen 'Norsk idrett. Indre spenninger og ytre press' redigeret af Dag Vidar Hanstad, Gunnar Breivik, Mari Kristin Sisjord og Hans B. Skaset og udgivet af forlaet akilles....

  11. BuddyPress theme development

    CERN Document Server

    Lister, Tammie

    2013-01-01

    This book is a hands-on tutorial guide to using BuddyPress.This book is great for designers and developers who are looking to learn how to develop BuddyPress themes. It's assumed that the reader has some understanding of Wordpress and is familiar with CSS and HTML.

  12. Head First WordPress

    CERN Document Server

    Siarto, Jeff

    2010-01-01

    Whether you're promoting your business or writing about your travel adventures, Head First WordPress will teach you not only how to make your blog look unique and attention-grabbing, but also how to dig into the more complex features of WordPress 3.0 to make your website work well, too. You'll learn how to move beyond the standard WordPress look and feel by customizing your blog with your own URL, templates, plugin functionality, and more. As you learn, you'll be working with real WordPress files: The book's website provides pre-fab WordPress themes to download and work with as you follow al

  13. Fundamental Particles and Interaction, Frontiers in Contemporary Physics: An International Lecture and Workshop Series at Vanderbilt University. Proceedings

    International Nuclear Information System (INIS)

    Panvini, R.S.; Weiler, T.J.

    1998-01-01

    These proceedings are based on papers given in the plenary sessions, lectures, and oral presentations at the Frontiers in Contemporary Physics: Fundamental Particles and Interactions Conference held in May, 1997 at Vanderbilt University in Tennessee, USA. The papers included in these proceedings cover wide ranging topics in particle physics, including hadron collider physics, electroweak physics, flavor physics, particle astrophysics, quantum chromodynamics and other particle theories etc. The Conference was widely attended. More than 130 participants took part in it; many came from non-US institutions. The full program of the talks can be found in the FCP97 web page at: http:backslash backslash fcp97.vanderbilt.edu backslash-fcp97. There were 19 papers in the proceedings, out of these, 10 have been abstracted for the Energy Science and Technology database

  14. Smashing WordPress Themes Making WordPress Beautiful

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    The ultimate guide to WordPress Themes - one of the hottest topics on the web today WordPress is so much more than a blogging platform, and Smashing WordPress Themes teaches readers how to make it look any way they like - from a corporate site, to a photography gallery and moreWordPress is one of the hottest tools on the web today and is used by sites including The New York Times, Rolling Stone, flickr, CNN, NASA and of course Smashing MagazineBeautiful full colour throughout - web designers expect nothing lessSmashing Magazine will fully support this book by by promoting it through their webs

  15. Science coverage and the press

    International Nuclear Information System (INIS)

    Hawkes, N.

    1992-01-01

    The writer, a journalist, summarizes the discussion of the Chilton Seminar, February 1992, and discusses the problems of bridging the incomprehension gap between scientists and lay readers of the press. (Author)

  16. Hot-pressing steatite bodies

    International Nuclear Information System (INIS)

    Aparicio Arroyo, E.

    1967-01-01

    Requirements for some special nuclear engineering ceramic shapes are: big size, impervious, dimensional accuracy and good mechanical and dielectric properties. Limitations of te conventional methods and advantages of te hot pressing techniques for the manufacturing of these shapes are discussed. Hot pressing characteristics of a certain steatite powder are studied. Occurrence of an optimum densification temperature just above the tale decomposition range is found. Experimental data show that the height/diameter ratio of the specimen has no effect on the sintering conditions. Increasing darkness from the graphite mould is detected above the optimum temperature. The hot-pressed steatite is compared with a fired dry-pressed sample of the same composition. (Author) 13 refs

  17. Pocketbook of the economic press 1994

    International Nuclear Information System (INIS)

    Kroll, J.M.

    1994-01-01

    The present 34th edition of this pocketbook gives an overview of German economic journalists with their specific branches, important specialist newspaper editorial boards, the economic editors of the daily-, weekly- and public press, radio and television broadcusting stations as well as news-, information- and teletext services. In addition, 1600 public relations offices of industrial businesses, industry and trade chambers and universities are given. It concludes with information on authorities at a national and county level and more than 1200 business groups and leading bodies. (BWI) [de

  18. Mathematical modelling of wet paper pressing

    NARCIS (Netherlands)

    Bežanovic, D.

    2005-01-01

    The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

  19. Discussion of ‘Style’ from Max Loehr and the Study of Chinese Bronzes, Style and Classification in the History of Art, Ithaca, Cornell University Press: Cornell East Asia Series 2008

    OpenAIRE

    Robert Bagley

    2010-01-01

    This essay is the concluding chapter of a study of the work of Max Loehr (1903-1988), an art historian whose visual analysis of unprovenanced Chinese bronzes famously anticipated the discoveries of archaeologists. It argues that Loehr’s strictly pragmatic understanding of style is implicit in the daily practice of most art historians, but that most of our explicit uses of the word, including such everyday expressions as ‘Romanesque style’ and ‘style of Raphael’, presume the existence of a mys...

  20. Discussion of ‘Style’ from Max Loehr and the Study of Chinese Bronzes, Style and Classification in the History of Art, Ithaca, Cornell University Press: Cornell East Asia Series 2008

    Directory of Open Access Journals (Sweden)

    Robert Bagley

    2010-06-01

    Full Text Available This essay is the concluding chapter of a study of the work of Max Loehr (1903-1988, an art historian whose visual analysis of unprovenanced Chinese bronzes famously anticipated the discoveries of archaeologists. It argues that Loehr’s strictly pragmatic understanding of style is implicit in the daily practice of most art historians, but that most of our explicit uses of the word, including such everyday expressions as ‘Romanesque style’ and ‘style of Raphael’, presume the existence of a mysterious, indefinable entity that is both a property of the object and a disembodied agent evolving independently of artists and objects. Not surprisingly, no procedure for ascertaining the style of an object has ever been described. The failure to recognize that style is not a physical property but only a shorthand for talking about comparisons is responsible for many classic confusions in art history. Finding the causes of a style or explaining its evolution (‘the origin of the Gothic style’, ‘the evolution from Renaissance to Baroque’, relating styles to times or cultures or nations, relating them across media (‘Baroque painting’ and ‘Baroque music’—these are fictitious problems, artefacts of a mistaken belief in a thing called ‘style’.

  1. Conférence de presse | Press Conference

    CERN Multimedia

    CERN. Geneva; Bejar Alonso, Isabel

    2018-01-01

    10:00-11:00 Conférence de presse en présence de Lucio Rossi, chef du projet LHC à Haute Luminosité et Isabel Bejar Alonso, chargée de la configuration, de la qualité et des ressources du projet LHC à Haute Luminosité.

  2. Investing in a Large Stretch Press

    Science.gov (United States)

    Choate, M.; Nealson, W.; Jay, G.; Buss, W.

    1986-01-01

    Press for forming large aluminum parts from plates provides substantial economies. Study assessed advantages and disadvantages of investing in large stretch-forming press, and also developed procurement specification for press.

  3. WordPress 3 Cookbook

    CERN Document Server

    Shreves, Ric

    2011-01-01

    This is a Packt Cookbook, which means it contains step-by-step instructions to achieve a particular goal or solve a particular problem. There are plenty of screenshots and explained practical tasks to make comprehension quick and easy. This book is not specifically for developers or programmers; rather it can be used by anyone who wants to get more out of their WordPress blog by following step-by-step instructions. A basic knowledge of PHP/XHTML/CSS/WordPress is desirable but not necessary.

  4. NASA University Research Centers Technical Advances in Education, Aeronautics, Space, Autonomy, Earth and Environment

    Science.gov (United States)

    Jamshidi, M. (Editor); Lumia, R. (Editor); Tunstel, E., Jr. (Editor); White, B. (Editor); Malone, J. (Editor); Sakimoto, P. (Editor)

    1997-01-01

    This first volume of the Autonomous Control Engineering (ACE) Center Press Series on NASA University Research Center's (URC's) Advanced Technologies on Space Exploration and National Service constitute a report on the research papers and presentations delivered by NASA Installations and industry and Report of the NASA's fourteen URC's held at the First National Conference in Albuquerque, New Mexico from February 16-19, 1997.

  5. Law and the Student Press.

    Science.gov (United States)

    Stevens, George E.; Webster, John B.

    Court cases and legal decisions involving the student press in the late 1960s and early 1970s are brought together in this book in order to show how the law has been applied to school officials and student journalists in high school, college, and the underground. The ten chapters cover the following topics: censorship, libel, obscenity, contempt,…

  6. Local and international press digest

    CERN Multimedia

    2008-01-01

    The following are the top stories in the Maltese and the international press today. The Times gives prominence to the Prime Minister's flying visit to Geneva yesterday, where he signed a research cooperation agreement with CERN, the European nuclear research organisation.

  7. A new hot pressing technique

    International Nuclear Information System (INIS)

    Carcey, J.

    1975-01-01

    An original hot pressing method which may be applied to ceramics, metals, and refractory powders is described. The products obtained are fine grained polycristalline materials, with homogeneous structure, very high density, unstrained and of very large dimensions (several square meters). This process equally applies to composite materials including powders, fibers, etc.. [fr

  8. Beyond Einstein: Exploring the Extreme Universe

    Science.gov (United States)

    Barbier, Louis M.

    2005-01-01

    This paper will give an overview of the NASA Universe Division Beyond Einstein program. The Beyond Einstein program consists of a series of exploratory missions to investigate some of the most important and pressing problems in modern-day astrophysics - including searches for Dark Energy and studies of the earliest times in the universe, during the inflationary period after the Big Bang. A variety of new technologies are being developed both in the science instrumentation these missions will carry and in the spacecraft that will carry those instruments.

  9. Press releases — the new trend in science communication

    DEFF Research Database (Denmark)

    Autzen, Charlotte

    2014-01-01

    Scientific institutions have for a long time known the importance of framing and owning stories about science They also know the effective way of communicating science in a press release This is part of the institution’s public relations. Enhanced competition among research institutions has led...... to a buildup of communicative competences and professionalization of public relations inside the institutions and the press release has become an integrated part of science communication from these institutions. Changing working conditions in the media, where fewer people have to publish more, have made press...... releases from trustworthy scientific institutions into free and easily copied content for the editors. In this commentary I investigate and discuss the communicative ecosystem of the university press release. I especially take a close look at the role of the critical and independent science journalist...

  10. The Press Relations of a Local School District: An Analysis of the Emergence of School Issues.

    Science.gov (United States)

    Morris, Jon R.; Guenter, Cornelius

    Press coverage of a suburban midwest school district is analyzed as a set of time series of observations including the amount and quality of coverage. Possible shifts in these series because of the emergence of controversial issues are analyzed statistically using the Integrated Moving Average Time Series Model. Evidence of significant shifts in…

  11. A press for the theater

    Directory of Open Access Journals (Sweden)

    Luciana Penna França

    2017-12-01

    Full Text Available Understanding the history of the amateur theater at the end of the XIXth century and the beginning of the XXth is possible, largely, because of the newspapers dedicated to the “theatrical affairs”. Such publications are important for the quantity and the diversity, revealing not only the place occupied by the theater in the capital, but also for the recognition of the press as a means of disclosure of plays, public education and opinion, artist projection, etc, not to mention personal affairs and requests, and the exchange of favors among managers and journalists. Even more, the press production of the dramatic amateurs clubs demonstrate the understanding of its role in the dissemination of ways to act and think beyond the stage and in the everyday life.

  12. Pressing technology for large bottoms

    International Nuclear Information System (INIS)

    Jilek, L.

    1986-01-01

    The technology has been selected of a circular plate bent into the shape of a trough, for pressing bottoms of pressure vessels from a circular plate of large diameter. The initial sheet is first bent in the middle by heating with the edges remaining straight. These are then welded longitudinally by electroslag welding and the circular shape is flame cut. The result will be a plate with a straight surface in the middle with raised edges which may be pressed into the desired shape. In this manner it is also possible to press pressure vessel bottoms with tube couplings from plates which are thickened in the middle and drilled; additional welding is then eliminated. Deformation from heat treatment may be avoided by the use of a fixture in the shape of a ring with a groove into which is fixed the edge of the bottom. During hardening of the bottom it will be necessary to care for the withdrawal of vapours and gases which would hamper uniform cooling. Bottom hardening with the grill and the cupola downwards has been proven. Deformation which occurs during treatment may to a certain extent be removed by calibration which cannot, however, be made without special fixtures and instruments. (J.B.)

  13. Modularity of Pressing Tools for Screw Press Producing Solid Biofuels

    Directory of Open Access Journals (Sweden)

    Miloš Matúš

    2012-01-01

    Full Text Available This paper focuses on the development of the newly-patented structure of a screw briquetting machine for compacting biomass into a solid biofuel. The design of the machine is based on the results of a comprehensive study of the complicated process of biomass compaction. The patented structure meets two main goals: the elimination of axial forces, leading to increased lifetime of the bearings, and the new modular design of a pressing chamber and tools with their geometry based on the application of a mathematical model.

  14. Resident-performed Ex-PRESS shunt implantation versus trabeculectomy.

    Science.gov (United States)

    Seider, Michael I; Rofagha, Soraya; Lin, Shan C; Stamper, Robert L

    2012-09-01

    To compare outcomes between resident-performed trabeculectomy and Ex-PRESS shunt implantation. A consecutive cohort of 36 Ex-PRESS shunt implantations and 57 trabeculectomies (1 eye/patient) performed by resident surgeons in their third year of ophthalmic training at the University of California, San Francisco and at the San Francisco Veterans Administration Hospital, under the supervision of a single glaucoma fellowship-trained surgeon were included in this study. Eyes with PRESS shunt groups at all follow-up points. On average, the Ex-PRESS shunt group required significantly less ocular antihypertensive medication to control IOP at 3 months postoperative (P=0.01), but no difference was found at 6 months or 1 year (all, P≥0.28). A larger proportion of Ex-PRESS shunt patients had good IOP control without medication at 3 (P=0.057) and 6 months (P=0.076) postoperatively. No difference was found in the rates of sight-threatening complications between groups (all, P≥0.22). In the hands of ophthalmology residents in their third year of training, the trabeculectomy and Ex-PRESS shunt implantation procedures perform comparably in terms of postoperative IOP control, reduction in patient dependence on ocular antihypertensive medications, and risk of complication in our population.

  15. WordPress Website Development

    OpenAIRE

    Lassila, Joonas

    2016-01-01

    The aim of this Bachelor’s thesis was to develop a WordPress mobile-first style website for the customer, Pohjois-Suomen Pesis. The main purpose of the development was to learn website designing principles and create a responsive website for the mobile and desktop platforms. The development process began defining the requirements of the website and creating the requirements document. Then next step was learning how to design a website layout and to choose the colour scheme for the site. T...

  16. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2012-01-01

    The ultimate guide to WordPress, from the world's most popular resource for web designers and developers As one of the hottest tools on the web today for creating a blog, WordPress has evolved to be much more that just a blogging platform and has been pushed beyond its original purpose. With this new edition of a perennially popular WordPress resource, Smashing Magazine offers you the information you need so you can maximize the potential and power of WordPress. WordPress expert Thord Daniel Hedengren takes you beyond the basic blog to show you how to leverage the capabilities of WordPress to

  17. Teach yourself visually WordPress

    CERN Document Server

    Majure, Janet

    2012-01-01

    Get your blog up and running with the latest version of WordPress WordPress is one of the most popular, easy-to-use blogging platforms and allows you to create a dynamic and engaging blog, even if you have no programming skills or experience. Ideal for the visual learner, Teach Yourself VISUALLY WordPress, Second Edition introduces you to the exciting possibilities of the newest version of WordPress and helps you get started, step by step, with creating and setting up a WordPress site. Author and experienced WordPress user Janet Majure shares advice, insight, and best practices for taking full

  18. Higher Education in the Republic of Yemen: The University of Sana'a. Policy, Research, and External Affairs Working Papers Series. Education and Employment.

    Science.gov (United States)

    Selvaratnam, Viswanathan; Regel, Omporn L.

    This analytical report reviews higher education in Yemen, specifically at Yemen's national university, the University of Sana'a. It finds that university enrollment has been increasing very rapidly from 17,000 students in 1987 to a projected enrollment of 79,000 students by 2000. This explosive growth has resulted in overcrowded classrooms,…

  19. Prediction of Pressing Quality for Press-Fit Assembly Based on Press-Fit Curve and Maximum Press-Mounting Force

    Directory of Open Access Journals (Sweden)

    Bo You

    2015-01-01

    Full Text Available In order to predict pressing quality of precision press-fit assembly, press-fit curves and maximum press-mounting force of press-fit assemblies were investigated by finite element analysis (FEA. The analysis was based on a 3D Solidworks model using the real dimensions of the microparts and the subsequent FEA model that was built using ANSYS Workbench. The press-fit process could thus be simulated on the basis of static structure analysis. To verify the FEA results, experiments were carried out using a press-mounting apparatus. The results show that the press-fit curves obtained by FEA agree closely with the curves obtained using the experimental method. In addition, the maximum press-mounting force calculated by FEA agrees with that obtained by the experimental method, with the maximum deviation being 4.6%, a value that can be tolerated. The comparison shows that the press-fit curve and max press-mounting force calculated by FEA can be used for predicting the pressing quality during precision press-fit assembly.

  20. Pellet presses for remote fuel fabrication

    International Nuclear Information System (INIS)

    Densley, P.J.

    1978-01-01

    Two types of mechanical presses are being tested from the remote operation and remote maintenance aspects. Results will be used to recommend the type of press and design considerations required for operation in a remotely operated and maintained process line

  1. Press to compress contaminated wastes drums

    International Nuclear Information System (INIS)

    Prevost, J.

    1993-01-01

    This patent describes a press for contaminated wastes drums pressing. The press is made of a structure comprising a base and an upper stringer bind to the base by vertical bearers, a compression system comprising a main cylinder and a ram, connected to the upper stringer

  2. Fourier series

    CERN Document Server

    Tolstov, Georgi P

    1962-01-01

    Richard A. Silverman's series of translations of outstanding Russian textbooks and monographs is well-known to people in the fields of mathematics, physics, and engineering. The present book is another excellent text from this series, a valuable addition to the English-language literature on Fourier series.This edition is organized into nine well-defined chapters: Trigonometric Fourier Series, Orthogonal Systems, Convergence of Trigonometric Fourier Series, Trigonometric Series with Decreasing Coefficients, Operations on Fourier Series, Summation of Trigonometric Fourier Series, Double Fourie

  3. IDEAL: ACADEMIC PRESS JOURNALS ONLINE

    CERN Multimedia

    The Library

    2001-01-01

    All Academic Press journals are available online to CERN users for a test period which will last until the end of July. The service 'IDEALIBRARY' includes 174 scientific journals that cover several domains, ranging from engineering to mathematics, computing and physics. Titles covered are among others 'Atomic Data and Nuclear Data Tables', 'Nuclear Data Sheets', 'Annals of Physics', 'Journal of Parallel and Distributed Computing'. Reference citations present in each article are linked to the corresponding full text, when the latter is published by a member of the CrossRef consortium (members are: Elsevier, APS, AIP and others). Therefore, the navigation between articles and references is uninterrupted. A search engine allows queries by author, title and publication year. See http://www.idealibrary.com. At present the Library is evaluating a site license offer proposed by the publisher.

  4. Professional WordPress design and development

    CERN Document Server

    Williams, Brad; Stern, Hal

    2014-01-01

    The highest rated WordPress development and design book on the market is back with an all new third edition. Professional WordPress is the only WordPress book targeted to developers, with advanced content that exploits the full functionality of the most popular CMS in the world. Fully updated to align with WordPress 4.1, this edition has updated examples with all new screenshots, and full exploration of additional tasks made possible by the latest tools and features. You will gain insight into real projects that currently use WordPress as an application framework, as well as the basic usage a

  5. The Universal and the National in Preschool Education. Papers from the OMEP International Seminar (Moscow, Russia, December 4-7, 1991). YCF Series 3.

    Science.gov (United States)

    Organisation Mondiale Pour l'Education Prescolaire, Warsaw (Poland).

    This collection of 27 brief essays focuses on universal aspects of childhood and early childhood education, education for peace, model early childhood programs, and the development of children's thinking and creativity skills. The essays are: (1) "The Universal and the National in Preschool Education (Goutard); (2) "Preschool Childhood:…

  6. RELATIONSHIP BETWEEN COMPACTING PRESSURE AND CONDITIONS IN PRESSING CHAMBER DURING BIOMASS PRESSING

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2016-02-01

    Full Text Available In this paper, we will present the impact of the conditions in pressing chambers during the pressing of wooden briquettes. The conditions in pressing chambers can significantly impact the resulting compacting pressure required for the pressing of briquettes. In the introduction, we show which parameters of the pressing chamber during pressing can impact the resulting compacting pressure. The experiment results which are shown in this paper described the detected impact of some important pressing chamber parameters. This experiment aims to detect the pressing chamber length impact and the impact of the way of pressing. By setting the pressing conditions, we will be able to achieve the suitable resulting compacting pressure with respect to the required final briquettes quality.

  7. Towards a more responsible press

    Directory of Open Access Journals (Sweden)

    Taimur ul Hassan

    2012-12-01

    Full Text Available The article analyses Pakistan’s newspapers’ performance with regard to civil society in2003 by using content analysis approach. There is no gainsaying that a strong civil society guaranteesa strong democracy. In Pakistan, spells of military rule have stunted the growth of democracy,adversely affecting civil society. Media too has suffered as a result. Normative theories of media callfor laying down norms and conventions for media. In democracy, all sections of society should berepresented in media. In Pakistan’s case, due to military regimes and quasi democratic governments,combined with the demands of market economy, the media have largely not been able to fulfill thisresponsibility towards society. Social Responsibility demands that the media must fulfill itsresponsibility towards society, while giving a free space to all voices of society. In Pakistan, whethernewspapers played that role in 2003 when civil society had accelerated its campaign to end honorkillings and crimes against women is investigated. The findings show that newspapers did supportcivil society, showing a gradual movement towards a more responsible press.

  8. Press Advertising – Varieties and Sub-Varieties. Methods of Promoting the Press

    OpenAIRE

    Mikosz, Joanna

    2016-01-01

    In the text entitled “Press advertising – varieties and sub-varieties. Methods of promoting the press”, the author discusses press advertising, which is a fast developing mass-media phenomenon. Modernity has granted press advertising a high quality of print and paper, as well as Infinite possibilities of combining various promotional forms with the press. The author argues that press advertising is one of the best ways in which a company can communicate with the market. Its advantage is, abov...

  9. Smashing WordPress Beyond the Blog

    CERN Document Server

    Hedengren, Thord Daniel

    2011-01-01

    Smashing WordPress shows you how to utilize the power of the WordPress platform, and provides a creative spark to help you build WordPress-powered sites that go beyond the obvious. The second edition of Smashing WordPress has been updated for WordPress 3.1+, which includes internal, custom post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to post types, the admin bar, and lots of other useful new features. You will learn the core concepts used to build just about anything in WordPress, resulting in fast deployments and greater design flexib

  10. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    OpenAIRE

    Georgia Kate Chapman

    2015-01-01

    This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protecti...

  11. Air University Style and Author Guide

    National Research Council Canada - National Science Library

    Bassett, Marvin

    2005-01-01

    The "Air University Style and Author Guide" is designed to unify the writing of faculty, staff, and students of Air University stylistically, and to give them information about publishing with Air University (AU) Press...

  12. Microplasticity in hot-pressed beryllium

    International Nuclear Information System (INIS)

    Plane, D.C.; Bonfield, W.

    1977-01-01

    Closed hysteresis loops measured in the microstrain region of hot pressed, commercially pure, polycrystalline beryllium are correlated with a dislocation - impurity atom, energy dissipating mechanism. (author)

  13. WordPress 3.7 complete

    CERN Document Server

    Król, Karol

    2013-01-01

    WordPress 3.5 Complete: Third Edition is a comprehensive and step-by-step tutorial packed with screenshots and examples to make it easy and quick to pick it up.This WordPress book is a guide to WordPress for online publishers and web developers. If you are new to blogging and want to create your own blog or website from scratch, then ""WordPress 3.5 Complete: Third Edition"" is for you. No prior knowledge of HTML/CSS or PHP is required.

  14. Activation of Selected Core Muscles during Pressing

    Directory of Open Access Journals (Sweden)

    Thomas W. Nesser

    2015-10-01

    Full Text Available Introduction: Unstable surface training is often used to activate core musculature during resistance training. Unfortunately, unstable surface training is risky and leads to detraining. Purpose: The purpose of this study was to determine core muscle activation during stable surface ground-based lifts. Methods: Fourteen recreational trained and former NCAA DI athletes (weight 84.2 ± 13.3 kg; height 176.0 ± 9.5 cm; age 20.9 ± 2.0 years volunteered for participation. Subjects completed two ground-based lifts: overhead press and push-press. Surface EMG was recorded from 4 muscles on the right side of the body (Rectus Abdominus (RA, External Oblique (EO, Transverse Abdominus (TA, and Erector Spinae (ES. Results: Paired sample T-tests identified significant muscle activation differences between the overhead press and the push-press included ES and EO. Average and peak EMG for ES was significantly greater in push-press (P<0.01. Anterior displacement of COP was significantly greater in push-press compared to overhead press during the eccentric phase. Conclusion: The push-press was identified as superior in core muscle activation when compared to the overhead pressing exercise. Keywords: torso, stability, weight lifting, resistance training

  15. Infinite series

    CERN Document Server

    Hirschman, Isidore Isaac

    2014-01-01

    This text for advanced undergraduate and graduate students presents a rigorous approach that also emphasizes applications. Encompassing more than the usual amount of material on the problems of computation with series, the treatment offers many applications, including those related to the theory of special functions. Numerous problems appear throughout the book.The first chapter introduces the elementary theory of infinite series, followed by a relatively complete exposition of the basic properties of Taylor series and Fourier series. Additional subjects include series of functions and the app

  16. Virtualization of Research Universities: Raising the Right Questions to Address Key Functions of the Institution. Research & Occasional Paper Series. CSHE.6.03

    Science.gov (United States)

    Pfeffer, Thomas

    2003-01-01

    The aim of this paper is to provide an overview of the variety of information and communication technology (ICT) applications at traditional universities and to integrate them into a holistic picture of the institution. Using the distinction of three key elements of scholarly activity (research, publication, education), it suggests a functional…

  17. Role Model Effects of Female STEM Teachers and Doctors on Early 20th Century University Enrollment in California. Research & Occasional Paper Series: CSHE.10.16

    Science.gov (United States)

    Bleemer, Zach

    2016-01-01

    What was the role of imperfect local information in the growth, gender gap, and STEM (Science, Technology, Engineering and Math) major selection of early 20th century American universities? In order to examine pre-1950 American higher education, this study constructs four rich panel datasets covering most students, high school teachers, and…

  18. Armenia: Restructuring To Sustain Universal General Education. World Bank Technical Paper No. 498. Europe and Central Asia Poverty Reduction and Economic Management Series.

    Science.gov (United States)

    Perkins, Gillian; Yemtsov, Ruslan

    Before the break-up of the Soviet Union, Armenia had a highly developed and expensive education system, matching the needs of the command economy. The government is now facing an enormous challenge to sustain universal coverage and performance standards in primary-secondary education with a small fraction of the former budget, while reorienting…

  19. Institutional Retention Strategies at Historically Black Colleges and Universities and Their Effects on Cohort Default Rates: 1987-1995. Monograph Series.

    Science.gov (United States)

    Galloway, Fred J.; Swail, Watson Scott

    This study analyzed institutional factors that significantly affect cohort default rates at historically black colleges and universities (HBCUs) and assessed the potential for reducing these rates. It has been hypothesized that the HBCUs most successful in lowering student cohort default rates are those that have also succeeded in increasing…

  20. Teenagers as Victims in the Press

    Science.gov (United States)

    Andersson, Gunvor; Lundstrom, Tommy

    2007-01-01

    Research into press reporting on young people has tended to concentrate on young people as offenders. In contrast, this article focuses on press coverage of teenagers as victims. Reports in two Swedish newspapers (a morning broadsheet and an evening tabloid) were studied over a period of four months and subjected to a qualitative analysis of…

  1. 1979: The Campus Student Press in America.

    Science.gov (United States)

    Ingelhart, Louis E.

    1979-01-01

    Discusses a number of topics involving the campus press, including the independence of campus publications, censorship issues, the relationship between the student press and the college administrator, the financing of student newspapers, yearbook production and financing, probable future student publications trends, and the need for appropriate…

  2. Planet Press: an EGU initiative to bring geoscientific research to children

    Science.gov (United States)

    Ferreira, Bárbara

    2016-04-01

    Planet Press (http://www.egu.eu/education/planet-press/) is an EGU educational project that aims to get children (mainly 7-13 year olds), as well as their parents and educators, interested in and engaged with up-to-date scientific research and news. Planet Press articles are short versions of EGU press releases written in child-friendly language. Because EGU press releases cover research published in the various EGU scientific journals, Planet Press focuses on topics as varied as air pollution, glaciers, climate change, earthquakes, ocean sciences, droughts and floods, or space sciences. The texts are reviewed by both scientists and educators to make sure they are accurate and clear to their target audience. By sharing new and exciting geoscientific research with young kids, we hope to inspire them to develop an interest in the Earth, planetary and space sciences. In this presentation, we describe how the Planet Press idea came about, how the project is run, and the challenges and lessons learnt since the launch of this educational initiative in 2014. Planet Press, which has the support of the EGU Committee on Education, is made possible by the work of volunteer scientists and educators who review and translate the texts. We are grateful for the help of Jane Robb, former EGU Educational Fellow, with launching the project. Planet Press is inspired by Space Scoop (http://www.spacescoop.org/), an initiative by UNAWE, the EU-Universe Awareness organisation, that brings astronomy news to children every week.

  3. On the series

    Indian Academy of Sciences (India)

    Home; Journals; Proceedings – Mathematical Sciences; Volume 115; Issue 4. On the Series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k. Necdet Batir. Volume 115 Issue 4 November 2005 pp 371- ... Author Affiliations. Necdet Batir1. Department of Mathematics, Faculty of Arts and Sciences, Yüzüncü Yil University, 65080 Van, Turkey ...

  4. Case Series of HIV Infection-Associated Arteriopathy: Diagnosis, Management, and Outcome Over a 5-Year period at Maharaj Nakorn Chiang Mai Hospital, Chiang Mai University.

    Science.gov (United States)

    Orrapin, Saritphat; Reanpang, Termpong; Orrapin, Saranat; Arwon, Supapong; Kattipathanapong, Thanate; Lekwanavijit, Suree; Rerkasem, Kittipan

    2015-09-01

    Patients infected with human immunodeficiency virus (HIV) can present with 4 pathology types: drug-induced vasospasm (ergotism), arterial limb ischemia, critical limb ischemia, and aneurysm. Although these problems are common vascular problems, they result in increased morbidity and mortality in HIV-infected patients, especially aneurysm. Patients with these problems tend to be diagnosed with difficulty because of atypical symptoms and signs. Because of lack of data in treatment outcome literature, our report explores and provides information on HIV infection-related arteriopathy. There were 17 patients in our 5-year review. There was no death in patients except the aneurysm type. The survival of aneurysm patients was significantly lower than from other pathologies (P = .003). Our case series showed good short-term outcome, and patients were not at risk for less beneficial surgical procedures. © The Author(s) 2015.

  5. WordPress web design for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Updated, full-color guide to creating dynamic websites with WordPress 3.6 In this updated new edition, bestselling For Dummies author and WordPress expert Lisa Sabin-Wilson makes it easy for anyone with a basic knowledge of the WordPress software to create a custom site using complementary technologies such as CSS, HTML, PHP, and MySQL. You'll not only get up to speed on essential tools and technologies and further advance your own design skills, this book also gives you pages of great case studies, so you can see just how other companies and individuals are creating compelling, customized, a

  6. Teach yourself visually complete WordPress

    CERN Document Server

    Majure, Janet

    2013-01-01

    Take your WordPress skills to the next level with these tips, tricks, and tasks Congratulations on getting your blog up and running with WordPress! Now are you ready to take it to the next level? Teach Yourself VISUALLY Complete WordPress takes you beyond the blogging basics with expanded tips, tricks, and techniques with clear, step-by-step instructions accompanied by screen shots. This visual book shows you how to incorporate forums, use RSS, obtain and review analytics, work with tools like Google AdSense, and much more.Shows you how to use mobile tools to edit a

  7. WordPress 24-Hour Trainer

    CERN Document Server

    Plumley, George

    2011-01-01

    The eagerly anticipated second edition, completely updated for WordPress 3.1 As an open source content management system, WordPress allows users to easily build feature-rich web sites with no programming experience. This unique book-and-video package is a friendly, self-paced beginners guide to the latest release of WordPress. Lessons are focused on practical, everyday tasks that users will need to create and maintain their sites: entering new content, creating new pages, managing menus, making content search-engine friendly. Plus you'll find lots of tips based on years of experience teaching

  8. WordPress web application development

    CERN Document Server

    Ratnayake, Rakhitha Nimesh

    2013-01-01

    An extensive, practical guide that explains how to adapt WordPress features, both conventional and trending, for web applications.This book is intended for WordPress developers and designers who have the desire to go beyond conventional website development to develop quality web applications within a limited time frame and for maximum profit. Experienced web developers who are looking for a framework for rapid application development will also find this to be a useful resource. Prior knowledge with of WordPress is preferable as the main focus will be on explaining methods for adapting WordPres

  9. Professional WordPress Plugin Development

    CERN Document Server

    Williams, Brad; Tadlock, Justin

    2011-01-01

    Taking WordPress to the next level with advanced plugin developmentWordPress is used to create self-hosted blogs and sites, and it's fast becoming the most popular content management system (CMS) on the Web. Now you can extend it for personal, corporate and enterprise use with advanced plugins and this professional development guide. Learn how to create plugins using the WordPress plugin API: utilize hooks, store custom settings, craft translation files, secure your plugins, set custom user roles, integrate widgets, work with JavaScript and AJAX, create custom post types. You'll find a practic

  10. Study of Servo Press with a Flywheel

    Science.gov (United States)

    Tso, Pei-Lum; Li, Cheng-Ho

    The servo press with a flywheel is able to provide flexible motions with energy-saving merit, but its true potential has not been thoroughly studied and verified. In this paper, such the “hybrid-driven” servo press is focused on, and the stamping capacity and the energy distribution between the flywheel and the servomotor are investigated. The capacity is derived based on the principle of energy conservation, and a method of using a capacity percentage plane for evaluation is proposed. A case study is included to illustrate and interpret that the stamping capacity is highly dependent on the programmed punch motions, thus the capacity prediction is always necessary while applying this kind of servo press. The energy distribution is validated by blanking experiments, and the results indicate that the servomotor needs only to provide 15% to the flywheel torque, 12% of the total stamping energy. This validates that the servomotor power is significantly saved in comparison with conventional servo presses.

  11. WordPress 3 For Business Bloggers

    CERN Document Server

    Thewlis, Paul

    2011-01-01

    This is a practical, hands-on book based around a fictitious case study blog, which you will build on a development server using WordPress. The case study grows chapter by chapter, from installing your local development server, right up to the finished blog. This book is for anybody running or starting a business blog using WordPress, whether you plan to use your blog for PR and marketing, or want to profit directly from blogging.

  12. Denmark, Democracy and the Free Press

    DEFF Research Database (Denmark)

    Breiting, Søren

    2006-01-01

    What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world.......What's important to Danish people in Denmark and in the world - most will argue for the importance of a free critical press, solidarity with people who need help and a peaceful world....

  13. The Liberal Struggle for Press Freedom

    DEFF Research Database (Denmark)

    Mogensen, Kirsten

    In this paper, the public debate following the re-ligion-motivated assassination of Dutch filmmaker Theo van Gogh in November 2004 is examined. The paper aims at describ-ing religious as well as secular positions in the Danish debate about freedom of speech and press in relation to religious issues....... Historically, the concept of press freedom was linked to a fight for religious freedom in London, as described by Siebert....

  14. Chip compacting press; Jido kirikuzu asshukuki

    Energy Technology Data Exchange (ETDEWEB)

    Oura, K. [Yuken Kogyo Co. Ltd., Kanagawa (Japan)

    1998-08-15

    The chips exhausted from various machine tools are massy, occupy much space and make working environment worse by staying added cutting oil to lower part. The chips are exhausted as a result of machining and have not constant quality. Even if used material is same the chips have various shapes and properties by kinds and machining methods of used machine tools, and are troublesome materials from a standpoint of their treatment. Pressing and solidification of the chips have frequently been tried. A chip compacting press introduced in this paper, a relatively cheap chip compacting press aimed for relatively small scale chip treatment, and has such characteristics and effects as follows. Chips are pressed and solidified by each raw material, so fractional management can be easily conducted. As casting metal chips and curled chips of iron and aluminum can be pressed to about 1/3 to 1/5 and about 1/40, respectively, space saving can be conducted. Chip compacting pressing upgrades its transporting efficiency to make possible to reduce its transporting cost. As chip solidification controls its oxidation and most cutting oil are removed, chips are easy to recycle. 2 figs., 1 tab.

  15. Clay characterization for making pressed and burned blocks

    International Nuclear Information System (INIS)

    Alexandre, J.; Silva, C.L. de A.P. e

    2012-01-01

    The municipality of Campos dos Goytacazes, located in the state of Rio de Janeiro, at 275 km from the capital, are the largest industrial ceramic state and he has over 100 unionized industries. The production of these industries is based on tiles, building blocks and bricks. Seeking the improvement and diversification of production, the North Fluminense State University has 18 years working in partnership with local industry, with students and teachers. One of the researches is the production of blocks pressed and burned. In this work are presented in many lab tests performed, morphology and some of technological properties. (author)

  16. Chart Series

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Centers for Medicare and Medicaid Services (CMS) offers several different Chart Series with data on beneficiary health status, spending, operations, and quality...

  17. Four-year trends in adiposity and its association with hypertension in serial groups of young adult university students in urban Cameroon: a time-series study.

    Science.gov (United States)

    Choukem, Simeon-Pierre; Kengne, André-Pascal; Nguefack, Maxime-Leolein; Mboue-Djieka, Yannick; Nebongo, Daniel; Guimezap, Jackson T; Mbanya, Jean Claude

    2017-05-23

    Obesity is a major risk factor for non-communicable diseases (NCDs) and is growing rapidly globally including in sub-Saharan Africa (SSA). We aimed to assess the trend in adiposity markers in Cameroonian university students, and investigated their associations with hypertension. From 2009 to 2012, we annually measured weight, height, blood pressure, waist (WC) and hip circumferences, and calculated the body mass index (BMI) and other indices of adiposity in consecutive students aged 18 years or above, during their registration. Time-trends in prevalence of overweight and obesity were estimated, and their associations with prevalent hypertension investigated. Among the 2726 participants, the overall prevalence of obesity, overweight and obesity combined, and hypertension was 3.5%, 21.0% and 6.3% respectively. From 2009 to 2012, the prevalence of overweight and obesity increased in men only, from 13.1% to 20.9% (p-trend = 0.002), whereas prevalent abdominal obesity increased in women only, from 6.5% to 11.7% (p-trend = 0.027). The BMI and the WC were independent predictors of hypertension; each kg/m 2 higher BMI was associated with 11% higher odds of hypertension, and each centimeter higher WC was associated with 9% higher odds of hypertension. Our results show that overweight and obesity are rapidly increasing in this population of young sub-Saharan African adults, and are contributing to an increasing burden of hypertension.

  18. Estudo sobre a incidência de úlceras por pressão em um hospital universitário Estudio de la incidencia de ulcera por presión en un hospital universitario Incidence of pressure ulcers at a university hospital

    Directory of Open Access Journals (Sweden)

    Noemi Marisa Brunet Rogenski

    2005-08-01

    Full Text Available Este estudo objetivou identificar a incidência de úlceras de pressão (UP no Hospital Universitário da USP e analisar as associações com as características sociodemográficas e clínicas da clientela. Após coleta de dados realizada durante 3 meses consecutivos, em que foram acompanhados 211 pacientes de risco, obteve-se índice de 39,8%. Correlações estatisticamente significativas (pLas finalidades de este estudio fueron las de identificar la incidencia de úlceras por presión en el hospital de la Universidad de São Paulo - Brasil y establecer las posibles asociaciones con las características sociodemográficas y clínicas de los pacientes. Los datos fueron recolectados de 211 pacientes de riesgo durante 3 meses consecutivos, resultando en una incidencia de 39.8%. Se obtuvo correlaciones estadísticamente significantes entre la incidencia y la edad y el área de las UP; y entre edad y humedad, tiempo de ingreso y nutrición, área de las UP y nutrición. Los resultados indican la urgente necesidad de implantar un programa de prevención y tratamiento de UP en la institución y contribuyen metodológicamente para que otros servicios de salud puedan establecer tal tipo de investigación.This study aimed to identify the incidence of pressure ulcers (PU at São Paulo University Hospital - Brazil, as well as to establish possible associations with patients' sociodemographic and clinical characteristics. Data were collected during three months, involving 211 risk patients, resulting in a 39.8% incidence level. A significant statistical correlation (p<0.05 was found between incidence level and age and PU area; and between age and humidity, time of hospitalization and nutrition, PU area and nutrition. Results indicate the urgent need to implant a PU prevention and treatment program at the institution and provide methodological contributions for other services to develop this kind of research.

  19. Applied time series analysis

    CERN Document Server

    Woodward, Wayne A; Elliott, Alan C

    2011-01-01

    ""There is scarcely a standard technique that the reader will find left out … this book is highly recommended for those requiring a ready introduction to applicable methods in time series and serves as a useful resource for pedagogical purposes.""-International Statistical Review (2014), 82""Current time series theory for practice is well summarized in this book.""-Emmanuel Parzen, Texas A&M University""What an extraordinary range of topics covered, all very insightfully. I like [the authors'] innovations very much, such as the AR factor table.""-David Findley, U.S. Census Bureau (retired)""…

  20. Surgical outcomes of the Ex-PRESS glaucoma filtration device in African American and white glaucoma patients

    Directory of Open Access Journals (Sweden)

    Salim S

    2012-06-01

    Full Text Available Sarwat Salim, Haiming Du, Sumalee Boonyaleephan, Jim WanUniversity of Tennessee Health Science Center, Memphis, TN, USAPurpose: To compare the surgical outcomes of the Ex-PRESS glaucoma filtration device in African American and white glaucoma patients.Design: Retrospective comparative case series.Methods: This was a comparative case series of 36 eyes of 36 African Americans and 43 eyes of 43 whites that underwent placement of the Ex-PRESS glaucoma filtration device under a partial-thickness scleral flap for uncontrolled glaucoma. All eyes received intraoperative mitomycin C. The primary outcome measures were intraocular pressure (IOP, number of postoperative glaucoma medications, and surgical success. Surgical success was defined as IOP between 5 and 18 mm Hg, with or without glaucoma medications, without further glaucoma surgery, or loss of light perception vision. Results: Average follow-up was 31.9 ± 9.8 (range, 14.6–47 months for African Americans and 30.7 ± 8.6 (range, 14.3–47 months for whites. At 33 months, surgical success was 80.0% in the African American group and 83.3% in the white group (P = 1.00. Reasons for surgical failure included increased IOP (3 eyes, 3.8%, persistent hypotony with maculopathy (1 eye, 1.3%, and further surgery (4 eyes, 5.06%. Compared with preoperative values, the mean postoperative IOP and number of glaucoma medications were significantly reduced in both groups, and no statistical difference was observed between the two groups at 33 months. Postoperative complications were similar in the two groups.Conclusions: Similar surgical outcomes were observed in African American and white glaucoma patients after implantation of the Ex-PRESS glaucoma filtration device. This latest modification of glaucoma filtration surgery may be a better surgical option for African Americans given its potential advantages of no tissue removal, predictable outcomes related to consistent lumen size and controlled flow, fewer

  1. Pattern of respiratory diseases in children presenting to the paediatric emergency unit of the University of Nigeria Teaching Hospital, Enugu: a case series report.

    Science.gov (United States)

    Oguonu, Tagbo; Adaeze Ayuk, Chikaodinaka; Edelu, Benedict Onyeka; Ndu, Ikenna Kingsley

    2014-06-10

    Respiratory diseases are one of the causes of childhood morbidity and mortality as well as hospitalization globally. The patterns of different respiratory illnesses in several parts of the world have been reported but there are few on the combined burden of the diseases. Determination of the burden of respiratory diseases as a group will help ascertain their collective impact on the health systems in order to develop intervention measures. Data from case notes of children with respiratory diseases admitted to the University of Nigeria Teaching Hospital Enugu, Nigeria over a six year period were extracted. Age, gender, admission rates, types of respiratory illness, duration of admission, season of presentation and outcome were analysed. Descriptive and inferential (Chi square) statistics were used to describe the various disease types and ascertain association of the disease outcome, seasonal pattern with the types of diseases. Of the total of 8974 children admissions, 2214 (24.7%) were due to respiratory diseases. The mean age of all the children with respiratory diseases was 3.3 years (SD 3.9). Communicable diseases were the common cause of admission cases throughout the seasons, p < 0.001. The highest admission rates were for pneumonia, (34.0%), acute bronchial asthma, (27.7%) and rhinosinusitis (14.6%) p < 0.001. The frequency of respiratory disease decreases with age and children less than five years of age and of low socio-economic status were commonly affected, p=0.01. The median duration of hospital stay was two days [range 1 to 8 days], children less than five years old and those of low socio-economic status, spent more than four days (p=0.01 and p < 0.001 respectively). The all-cause mortality was 0.5% (11/2214) of which 81.8% (9/11) was due to pneumonia. Respiratory diseases constitute a significant burden of childhood illnesses in our centre. Efforts are required to reduce the impact as part of the steps towards the achievement of the Millennium

  2. Quantifying Selection with Pool-Seq Time Series Data.

    Science.gov (United States)

    Taus, Thomas; Futschik, Andreas; Schlötterer, Christian

    2017-11-01

    Allele frequency time series data constitute a powerful resource for unraveling mechanisms of adaptation, because the temporal dimension captures important information about evolutionary forces. In particular, Evolve and Resequence (E&R), the whole-genome sequencing of replicated experimentally evolving populations, is becoming increasingly popular. Based on computer simulations several studies proposed experimental parameters to optimize the identification of the selection targets. No such recommendations are available for the underlying parameters selection strength and dominance. Here, we introduce a highly accurate method to estimate selection parameters from replicated time series data, which is fast enough to be applied on a genome scale. Using this new method, we evaluate how experimental parameters can be optimized to obtain the most reliable estimates for selection parameters. We show that the effective population size (Ne) and the number of replicates have the largest impact. Because the number of time points and sequencing coverage had only a minor effect, we suggest that time series analysis is feasible without major increase in sequencing costs. We anticipate that time series analysis will become routine in E&R studies. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

  3. RADON CONCENTRATION TIME SERIES MODELING AND APPLICATION DISCUSSION.

    Science.gov (United States)

    Stránský, V; Thinová, L

    2017-11-01

    In the year 2010 a continual radon measurement was established at Mladeč Caves in the Czech Republic using a continual radon monitor RADIM3A. In order to model radon time series in the years 2010-15, the Box-Jenkins Methodology, often used in econometrics, was applied. Because of the behavior of radon concentrations (RCs), a seasonal integrated, autoregressive moving averages model with exogenous variables (SARIMAX) has been chosen to model the measured time series. This model uses the time series seasonality, previously acquired values and delayed atmospheric parameters, to forecast RC. The developed model for RC time series is called regARIMA(5,1,3). Model residuals could be retrospectively compared with seismic evidence of local or global earthquakes, which occurred during the RCs measurement. This technique enables us to asses if continuously measured RC could serve an earthquake precursor. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. PRESS FREEDOM IN SINGAPORE AND MALAYSIA: DEFAMATION

    Directory of Open Access Journals (Sweden)

    Georgia Kate Chapman

    2015-04-01

    Full Text Available This paper focuses on the arguments around restriction on freedom of the press in the Strong States of Singapore and Malaysia. It assesses the presence of constraints on press freedoms in democratic western countries imposed by corporation rather than state and the similar effects that these constraints may have on bias present in publicly accessible news reporting. It argues that independence of the press does not just require protection from legal and executive regulation, but also protection from large media corporations and their political alignments. This report will assess the bias of reporting and news media publication that exists in Malaysia and Singapore due to legislative and regulatory constraints as opposed to bias that exist in the western liberal democratic nations of the United Kingdom (UK and the United States of America (USA due to Media Organisation control.

  5. CSR-communication in the Business Press

    DEFF Research Database (Denmark)

    Morsing, Mette; Langer, Roy

    on a broadly encompassing and ambiguous definition of CSR. Our empirical data shows how the business press in its discourse on CSR provides no clarity on the definition of CSR in terms of a coherent motive, a dominant stakeholder or a consistent issue, but rather maintains ambiguity and imprecision about......In this paper we analyze the construction of corporate social responsibility in the business press as an act of strategic ambiguity. While corporate social responsibility (CSR) generally evokes positive associations in public opinion, this paper demonstrates that these associations are based...... is systematically maintained in the business press. We refer to this process as strategic ambiguity. The paper discusses the potential value and limitations of framing CSR in a state of strategic ambiguity in the context of the concurrent rethinking of the role of business in modern welfare societies....

  6. Process simulation and experimental validation of Hot Metal Gas Forming with new press hardening steels

    Science.gov (United States)

    Paul, A.; Reuther, F.; Neumann, S.; Albert, A.; Landgrebe, D.

    2017-09-01

    One field in the work of the Fraunhofer Institute for Machine Tools and Forming Technology IWU in Chemnitz is industry applied research in Hot Metal Gas Forming, combined with press hardening in one process step. In this paper the results of investigations on new press hardening steels from SSAB AB (Docol®1800 Bor and Docol®2000 Bor) are presented. Hot tensile tests recorded by the project partner (University of West Bohemia, Faculty of Mechanical Engineering) were used to create a material model for thermo-mechanical forming simulations. For this purpose the provided raw data were converted into flow curve approximations of the real stress-real strain-curves for both materials and afterwards integrated in a LS-DYNA simulation model of Hot Metal Gas Forming with all relevant boundary conditions and sub-stages. Preliminary experimental tests were carried out using a tool at room temperature to permit evaluation of the forming behaviour of Docol 1800 Bor and Docol 2000 Bor tubes as well as validation of the simulation model. Using this demonstrator geometry (outer diameter 57 mm, tube length 300 mm, wall thickness 1.5 mm), the intention was to perform a series of tests with different furnace temperatures (from 870 °C to 1035 °C), maximum internal pressures (up to 67 MPa) and pressure build-up rates (up to 40 MPa/s) to evaluate the formability of Docol 1800 Bor and Docol 2000 Bor. Selected demonstrator parts produced in that way were subsequently analysed by wall thickness and hardness measurements. The tests were carried out using the completely modernized Dunkes/AP&T HS3-1500 hydroforming press at the Fraunhofer IWU. In summary, creating a consistent simulation model with all relevant sub-stages was successfully established in LS-DYNA. The computation results show a high correlation with the experimental data regarding the thinning behaviour. The Hot Metal Gas Forming of the demonstrator geometry was successfully established as well. Different hardness values

  7. Internet Marketing with WordPress

    CERN Document Server

    Mercer, David

    2011-01-01

    The book's accompanying Interactive learning environment on siteprebuilder.com gives you an online place to enhance and extend your practical experience through exercises, consolidate your learning and theoretical knowledge with marked quizzes, interaction with your WordPress marketing community, and fun and exciting extras such as challenges and competitions. This book is for people already using WordPress, who want more visitors, better visitors, and to convert more of them into paying customers. No prior marketing experience is required, although a basic understanding of either hosted or se

  8. WordPress 24-hour trainer

    CERN Document Server

    Plumley, George

    2015-01-01

    Create and expand feature-rich sites with no programming experience Ready to build, maintain, and expand your web site with WordPress but have no prior programming experience? WordPress 24-Hour Trainer, 3rd Edition is your book-and-video learning solution that walks you step-by-step through all the important features you will need to know. Lessons range from focused, practical everyday tasks to more advanced, creative features. Learn from an industry professional how to enter content, create pages, manage menus, utilize plug-ins, connect to social media, create membership and e-commerce site

  9. Bullying the media : Cultural and climato-economic readings of press repression versus press freedom

    NARCIS (Netherlands)

    Van de Vliert, E.

    Journalists and media assistants in many places are murdered, imprisoned, censored, threatened, and similarly harrassed. Here I document that, and explain why, there are three climato-economic niches of press repression versus press freedom as part of broader syndromes of national culture. A

  10. Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

    Directory of Open Access Journals (Sweden)

    Peter Križan

    2012-01-01

    Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

  11. Case Series

    African Journals Online (AJOL)

    calciphylaxis is prevention through rigorous control of phosphate and calcium balance. We here present two ... The authors declared no conflict of interest. Introduction. Calciphylaxis is a rare but serious disorder .... were reported to resolve the calciphylaxis lesions in a chronic renal failure patient [20]. In a series of five.

  12. Fourier Series

    Indian Academy of Sciences (India)

    polynomials are dense in the class of continuous functions! The body of literature dealing with Fourier series has reached epic proportions over the last two centuries. We have only given the readers an outline of the topic in this article. For the full length episode we refer the reader to the monumental treatise of. A Zygmund.

  13. Case series

    African Journals Online (AJOL)

    abp

    13 oct. 2017 ... This is an Open Access article distributed under the terms of the Creative Commons Attribution ... Bifocal leg fractures pose many challenges for the surgeon due to .... Dans notre serie, le taux d'infection est reste dans un.

  14. Fourier Series

    Indian Academy of Sciences (India)

    The theory of Fourier series deals with periodic functions. By a periodic ..... including Dirichlet, Riemann and Cantor occupied themselves with the problem of ... to converge only on a set which is negligible in a certain sense (Le. of measure ...

  15. case series

    African Journals Online (AJOL)

    Administrator

    Key words: Case report, case series, concept analysis, research design. African Health Sciences 2012; (4): 557 - 562 http://dx.doi.org/10.4314/ahs.v12i4.25. PO Box 17666 .... According to the latest version of the Dictionary of. Epidemiology ...

  16. 28 CFR 540.64 - Press pools.

    Science.gov (United States)

    2010-07-01

    ... Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE INSTITUTIONAL MANAGEMENT CONTACT WITH PERSONS IN THE COMMUNITY Contact With News Media § 540.64 Press pools. (a) The Warden may establish a... shall notify all news media representatives who have requested interviews or visits that have not been...

  17. Law of the Student Press. Second Edition.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    Noting dramatic changes in First Amendment protections for high school students and new legal issues facing college newspaper editors, this book describes in detail the legal rights and responsibilities of both the high school and college press. While the book is extensively footnoted, it intentionally avoids "legal-ese" and "brings…

  18. Press kit kicks off new branding.

    Science.gov (United States)

    Rees, Tom

    2004-01-01

    A smartly produced press kit resulted in unprecedented news coverage when Denver's Porter Adventist Hospital recently unveiled plans for an extensive 80 million dollars redevelopment. A news conference was held to announce this plan, along with the opening of the hospital's new emergency department. The overall effort is part of the new branding strategy of the 75-year-old hospital.

  19. Investigation of pressing of molybdenum powder compacts

    International Nuclear Information System (INIS)

    Mymrin, S.A.; Kuznetsov, V.Eh.; Yampol'skij, M.L.; Leonov, S.A.; Mikhridinov, R.M.; Korzukhin, V.A.

    1990-01-01

    Results of an experimental investigation into pressing of compacts of MCh type molybdenum powders using the industrial equipment are presented. To measure the density of powder molybdenum billets a radioisotopic density meter with cesium-137 is used as radioactive gamma radiation source. The dependence of the produced billet density on the specific compacting pressure at different values of the powder bulk density is ascertained

  20. Eye-Pressing by Visually Impaired Children.

    Science.gov (United States)

    Jan, James E.; And Others

    1983-01-01

    The nature of eye-pressing as a visual stimulation mannerism in children with severely impaired eyesight is examined, and a possible physiological explanation (that self-stimulation occurs when the demand of the brain for meaningful visual information is not met) is offered. (CL)

  1. Spontaneous pneumomediastinum after bench press training.

    Science.gov (United States)

    Nishino, Tomoya

    2017-04-01

    Spontaneous pneumomediastinum is often associated with asthma and mainly affects adolescent males with a tall, thin body habitus. A 17-year-old man complained of chest and pharyngeal pain after bench press training and spontaneous pneumomediastinum was diagnosed. It should be considered in the differential diagnosis of chest pain of uncertain cause.

  2. A Journalist's Guide to the Free Press.

    Science.gov (United States)

    Ingelhart, Louis

    1996-01-01

    Summarizes the content of the federal constitution and various state constitutions regarding freedom of the press. Examines certain borderline issues, including actions and expressions, pornography, defamation, libel, and copyrighted material. States that regulation of unprotected material must be reasonable, specific, and clear. Discusses what…

  3. Free Press in a Constitutional Democracy

    Science.gov (United States)

    Lucianek, Christine

    2014-01-01

    This article describes a lesson in which students will examine several views expressed by the founders to understand the context for including freedom of the press in the First Amendment. Students will be asked to think about the role that the news media and the need to be an informed citizen continue to play in our democracy. Students will…

  4. [Report from the Student Press Law Center.

    Science.gov (United States)

    Student Press Law Center, Washington, DC.

    The Student Press Law Center serves as a national clearinghouse to collect, analyze, and distribute information on the First Amendment rights of student journalists and journalism teachers and on violations of these rights in high schools and colleges. This report details information concerning current censorship incidents: the investigation by…

  5. When International Press Rights "Are" the News

    Science.gov (United States)

    Freedman, Eric

    2006-01-01

    In many countries, reporters and editors face criminal prosecution, censorship, self-censorship, exile, tax audits, loss of broadcast and publication licenses, loss of jobs, assault, and even assassination based on how they practice their profession. Press rights and human rights advocacy groups try to draw media and official attention to those…

  6. Clarification of Orange Press Liquors by PVDF Hollow Fiber Membranes

    Directory of Open Access Journals (Sweden)

    Silvia Simone

    2016-01-01

    Full Text Available Press liquors are typical by-products of the citrus juice processing characterized by a high content of organic compounds and associated problems of environmental impact, which imply high treatment costs. However, these wastes contain a great number of health promoting substances, including fibers, carotenoids and phenolic compounds (mainly flavonoids, whose recovery against waste-destruction technologies is very attractive for new business opportunities. In this work, the clarification of orange press liquor by using microfiltration (MF membranes is studied as a preliminary step to obtain a permeate stream enriched in antioxidant compounds which can be further processed to produce extracts of nutraceutical and/or pharmaceutical interest. MF poly(vinylidene fluoride (PVDF hollow fibers were prepared by the dry/wet spinning technique. A series of fibers was produced from the same polymeric dope, in order to investigate the effect of selected spinning parameters, i.e., bore fluid composition and flowrate, on their properties. The morphology of the produced fibers was analyzed by Scanning Electron Microscopy (SEM. Fibers were further characterized for their mechanical properties, porosity, bubble point, pore size distribution and pure water permeability (PWP. Some of the produced fibers exhibited high permeability (pure water permeability ~530 L/m2·h·bar, coupled to good mechanical resistance and pore size in the range of MF membranes. These fibers were selected and used for the clarification of press liquor from orange peel processing. In optimized operating conditions, the selected fibers produced steady-state fluxes of about 41 L/m2·h with rejections towards polyphenols and total antioxidant activity of 4.1% and 1.4%, respectively.

  7. Exposures series

    OpenAIRE

    Stimson, Blake

    2011-01-01

    Reaktion Books’ Exposures series, edited by Peter Hamilton and Mark Haworth-Booth, is comprised of 13 volumes and counting, each less than 200 pages with 80 high-quality illustrations in color and black and white. Currently available titles include Photography and Australia, Photography and Spirit, Photography and Cinema, Photography and Literature, Photography and Flight, Photography and Egypt, Photography and Science, Photography and Africa, Photography and Italy, Photography and the USA, P...

  8. Case series

    African Journals Online (AJOL)

    ebutamanya

    2016-05-12

    May 12, 2016 ... based on the records of 53 children hospitalized at the pediatrics unit of Hassan II University Hospital, Fez Morocco. Thirty boys ... development of the lungs. This could ..... Figure 2: Whistle of a toy at the right main bronchus.

  9. Graphic Arts: Book Three. The Press and Related Processes.

    Science.gov (United States)

    Farajollahi, Karim; And Others

    The third of a three-volume set of instructional materials for a graphic arts course, this manual consists of nine instructional units dealing with presses and related processes. Covered in the units are basic press fundamentals, offset press systems, offset press operating procedures, offset inks and dampening chemistry, preventive maintenance…

  10. Bench press exercise: the key points.

    Science.gov (United States)

    Padulo, J; Laffaye, G; Chaouachi, A; Chamari, K

    2015-06-01

    The bench press exercise (BPE) is receiving increasing interest as a field testing, training/therapeutic modality to improve neuromuscular performance or to increase bone mass density. Several studies have been performed using BPE as a standard for increasing upper-limb strength. For this purpose, the position of the bar, the loads, the sets, the number of repetitions, the recovery time in-between sets, the movement speed, the muscular work and the use of the determination of the one repetition maximum (1-RM) are the classical tools investigated in the literature that have been shown to affect the BPE effect on neuromuscular. The goal of the present short review is to make a picture of the current knowledge on the bench press exercise, which could be very helpful for a better understanding of this standard movement and its effects. Based on the related literature, several recommendations on these key points are presented here.

  11. Reducing VOC Press Emission from OSB Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Gary D. McGinnis; Laura S. WIlliams; Amy E. Monte; Jagdish Rughani: Brett A. Niemi; Thomas M. Flicker

    2001-12-31

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board.

  12. Method for hot pressing beryllium oxide articles

    Science.gov (United States)

    Ballard, Ambrose H.; Godfrey, Jr., Thomas G.; Mowery, Erb H.

    1988-01-01

    The hot pressing of beryllium oxide powder into high density compacts with little or no density gradients is achieved by employing a homogeneous blend of beryllium oxide powder with a lithium oxide sintering agent. The lithium oxide sintering agent is uniformly dispersed throughout the beryllium oxide powder by mixing lithium hydroxide in an aqueous solution with beryllium oxide powder. The lithium hydroxide is converted in situ to lithium carbonate by contacting or flooding the beryllium oxide-lithium hydroxide blend with a stream of carbon dioxide. The lithium carbonate is converted to lithium oxide while remaining fixed to the beryllium oxide particles during the hot pressing step to assure uniform density throughout the compact.

  13. Freedom of the Press – two concepts

    Directory of Open Access Journals (Sweden)

    Markus Meckl

    2015-03-01

    Full Text Available In 1644 the debate for freedom of expression started in modern times thanks to John Milton’s Areopagitica, where he still argued about God in order to justify his quest for freedom. With the enlightenment God lost his unifying role for society and could no longer serve as justification. Two arguments were brought then forward to justify freedom of the press: One by the continental movement of the enlightenment; the other from within the movement of utilitarianism, and most influentially by John Stuart Mill. Both underlined the importance of truth; however, they differed in their understanding on what truth was good for. This difference in their arguments had a lasting impact on the debate on the limits of freedom of the press.

  14. Analysis of Institutional Press Releases and its Visibility in the Press

    Directory of Open Access Journals (Sweden)

    José Antonio Alcoceba-Hernando, Ph.D.

    2010-01-01

    Full Text Available The relationships between institutional communication and media communication influence the shaping of social representations of public issues. This research article analyses these relationships based on the case study of the external communication of a public institution, the press releases of Spain’s Youth Institute (Instituto de la Juventud, aka, Injuve, during three years and their repercussion in the press during the same period of time. The results obtained in this research allowed drawing conclusions on the types of communication production of the aforementioned institution and the news treatment of such pieces of information by the printed and digital media. The press releases and the news items were studied using quantitative media content analysis which focused, especially, in referential issues like the information treatment, the thematic analysis, youth representations in the case of the releases; and the visibility of the press releases in the making of news

  15. ACTIVATED HOT PRESSING BEHAVIOR OF WC NANOPOWDERS

    Directory of Open Access Journals (Sweden)

    Edwin GEVORKYAN

    2010-06-01

    Full Text Available The questions of consolidation of nanopowders concerning hot compaction by pressing activated by electric current action are considered. Mechanisms of grain boundary creep-sliding which are sequentially prevalent in a forming of compacted structures under influence of temperature factor and in the presence of a direct electric heating are discussed. Structural-transformational sources and conditions of forming of high physical-mechanical properties of nanopowder refractory solid-state products are described.

  16. The antimatter. Press breakfast 23 may 2000

    International Nuclear Information System (INIS)

    Spiro, M.; Dejardin, M.; Debu, P.; Aleksan, R.

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  17. Press conference of the 15 october 2002

    International Nuclear Information System (INIS)

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  18. Design of jigs, fixtures and press tools

    CERN Document Server

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  19. Natural cold pressed oils as cosmetic products

    Directory of Open Access Journals (Sweden)

    Małgorzata Ligęza

    2016-12-01

    Full Text Available Background. It seems that patients may ask general practitioners about natural cosmetics applied on the skin regarding their safety and suitability. Objectives. The aim of the study was to analyze natural cold pressed oils as potential cosmetic products. Material and methods. Cold pressed oils obtained from selected seeds and fruit stones were analyzed, including: chokeberry seed oil, blackcurrant seed oil, elderberry seed oil, raspberry seed oil, apricot seed oil, tomato seed oil, strawberry seed oil, broccoli seed oil, Nigella sativa seed oil, hemp oil, safflower seed oil, Silybum marianum seed oil and coconut oil. 80 adult volunteers assessed the cosmetic properties of the analyzed oils. Each of the volunteers tested 2 to 4 different oils, by applying them on the skin. In addition, patch tests with all analyzed oils were performed on 23 individuals. Results. The majority of tested oils were positively evaluated by the participants: in the opinion of the participants, oil extracted from safflower had the best appearance (100% positive opinions, coconut oil had the best smell (70% positive opinions, while black currant seed oil showed the best absorbency (85% positive opinions. No irritation was observed within the analyzed product group, albeit one allergic reaction to apricot seed oil was observed with patch testing. Conclusions . Based on the achieved results, it could be suggested that natural cold pressed oils can be applied to the skin as cosmetics. Our observations may be helpful for general practitioners when choosing natural cosmetics.

  20. Forming of AHSS using Servo-Presses

    Science.gov (United States)

    Groseclose, Adam Richard

    Stamping of Advanced High Strength Steel (AHSS) alloys poses several challenges due to the material's higher strength and low formability compared to conventional steels and other problems such as (a) inconsistency of incoming material properties, (b) ductile fracture during forming, (c) higher contact pressure and temperature rise during forming, (d) higher die wear leading to reduced tool life, (e) higher forming load/press capacity, and (f) large springback leading to dimensional inaccuracy in the formed part. [Palaniswamy et. al., 2007]. The use of AHSS has been increasing steadily in automotive stamping. New AHSS alloys (TRIP, TWIP) may replace some of the Hot Stamping applications. Stamping of AHSS alloys, especially higher strength materials, 780 MPa and higher, present new challenges in obtaining good part definition (corner and fillet radii), formability (fracture and resulting scrap) and in reducing springback. Servo-drive presses, having the capability to have infinitely variable and adjustable ram speed and dwell at BDC, offer a potential improvement in quality, part definition, and springback reduction especially when the infinitely adjustable slide motion is used in combination with a CNC hydraulic cushion. Thus, it is desirable to establish a scientific/engineering basis for improving the stamping conditions in forming AHSS using a servo-drive press.

  1. Precision evaluation of pressed pastille preparation different methods for X-ray fluorescence analysis

    International Nuclear Information System (INIS)

    Lima, Raquel Franco de Souza; Melo Junior, Germano; Sa, Jaziel Martins

    1997-01-01

    This work relates the comparison between the results obtained with the two different methods of preparing pressed pastilles from the crushed sample. In this study, the reproductivity is evaluated, aiming to define the method that furnishes a better analytic precision. These analyses were realized with a X-ray fluorescence spectrometer at the Geology Department of the Federal University of Rio Grande do Norte

  2. The Flight from Reason. Essays on Intellectual Freedom in the Academy, the Press, and the Library.

    Science.gov (United States)

    Berninghausen, David K.

    David K. Berninghousen's writings on intellectual freedom in the library, the university, and the press are collected in this volume. These essays cover the education of librarians for intellectual freedom, the communications process, the threat to liberal values (intellectualism, objectivity) in the communications institutions, the erosion of…

  3. Human Rights and Consership in the Portuguese Press

    Directory of Open Access Journals (Sweden)

    Isabel Salema Morgado

    2007-06-01

    Full Text Available This article analyzes the censorship system existing in Portugal in the XVIII century, when a rigid jurisdiction with respect to press freedom was instituted by Portuguese State and how “Gazeta de Lisboa” succeeded in informing its public about the revolutionary events that took place in France during the year of 1789. Many years after that, in 1948, other important event – the Universal Declaration of Human Rights approved by the United Nations General Assembly, did not receive the attention of Portuguese Press. Of the 15 newspapers and magazines with wider circulation that were consulted, only three published the news of the approval. Also I did not fi nd in any of the archives documents which proved the exercising of censorship or punishment, by the dictatorial regime of Salazar, in the form of disciplinary processes against the newspapers with relation to the publication of news referring to the Declaration. I am inclined toward the theory of the act of self-censorship imposed by the editor on himself, in both events.

  4. Press conference bring excitement of geophysical research to the public

    Science.gov (United States)

    Leifert, Harvey

    “A Flare to Remember.” “Starbucks for Starfish.” “Earth's Rotation Slows for El Niño.” What do these catchy headlines have in common? They all resulted from presentations at AGU's Spring Meeting in Boston, Mass. Yes, geophysical science can be big news when presented in a way that is interesting to general audiences.Proof? Well, the “Flare to Remember” headline (in the Dallas Morning News) reported the discovery, via the SOHO spacecraft, that a solar flare had produced, deep inside the Sun, seismic disturbances of a magnitude never experienced on Earth. Researchers Valentina Zharkova of Glasgow University and Alexander Kosovichev of Stanford gave media representatives a preview of their session, supported by visual aids, in the AGU press briefing room.

  5. Long-term clinical outcomes and survivorship of press-fit condylar sigma fixed-bearing and mobile-bearing total knee prostheses in the same patients.

    Science.gov (United States)

    Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik; Kulkarni, Sourabh S; Kim, Yoon-Hong

    2014-10-01

    We are aware of no study that has compared press-fit condylar Sigma fixed-bearing and mobile-bearing total knee prostheses in the same patients after more than ten years of follow-up. The purpose of the current study was to compare these two implants with respect to the functional and radiographic results, prevalence of osteolysis, and overall revision rates at a mean of 12.1 years of follow-up. The study consisted of a consecutive series of 444 patients (mean age [and standard deviation], 66.5 ± 7.4 years) who underwent simultaneous bilateral total knee arthroplasty, with one side treated immediately after the other. All of the patients received a press-fit condylar Sigma mobile-bearing prosthesis on one side and a press-fit condylar Sigma fixed-bearing prosthesis on the contralateral side. The minimum duration of follow-up was ten years (mean, 12.1 years; range, ten to thirteen years). At the time of each follow-up visit, the patients were assessed clinically and radiographically. Postoperative total knee scores (95 and 94 points), Western Ontario and McMaster Universities Osteoarthritis Index (19 and 18 points), University of California, Los Angeles activity score (both prostheses, 5 points), range of motion (129° ± 6.3° and 127° ± 6.8°), and radiographic findings did not differ significantly between the press-fit condylar Sigma mobile and fixed-bearing designs at the final follow-up. The prevalence of aseptic loosening (1.4% and 1.8%) did not differ significantly between the mobile and fixed-bearing implant designs. No knee in either group had osteolysis. The estimated survival rate with revision as the end point was 98.2% (95% confidence interval, 91% to 99%) and 97.5% (95% confidence interval, 91% to 99%) at 12.1 years for the mobile and fixed-bearing implant groups, respectively. The results of the present long-term clinical study suggest that excellent clinical and radiographic results were achieved with both the press-fit condylar Sigma mobile and

  6. Case Series.

    Science.gov (United States)

    Vetrayan, Jayachandran; Othman, Suhana; Victor Paulraj, Smily Jesu Priya

    2017-01-01

    To assess the effectiveness and feasibility of behavioral sleep intervention for medicated children with ADHD. Six medicated children (five boys, one girl; aged 6-12 years) with ADHD participated in a 4-week sleep intervention program. The main behavioral strategies used were Faded Bedtime With Response Cost (FBRC) and positive reinforcement. Within a case-series design, objective measure (Sleep Disturbance Scale for Children [SDSC]) and subjective measure (sleep diaries) were used to record changes in children's sleep. For all six children, significant decrease was found in the severity of children's sleep problems (based on SDSC data). Bedtime resistance and mean sleep onset latency were reduced following the 4-week intervention program according to sleep diaries data. Gains were generally maintained at the follow-up. Parents perceived the intervention as being helpful. Based on the initial data, this intervention shows promise as an effective and feasible treatment.

  7. Desktop Publishing in the University.

    Science.gov (United States)

    Burstyn, Joan N., Ed.

    Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

  8. Effect of uniaxially pressing ordinary Portland cement pastes containing metal hydroxides on porosity, density, and leaching

    International Nuclear Information System (INIS)

    Cheeseman, C.R.; Asavapisit, S.; Knight, J.

    1998-01-01

    Synthetic metal hydroxide wastes containing Zn and Pb have been mixed with partially hydrated cement and uniaxially pressed. The effect on porosity, pore size distribution, and bulk and skeletal densities has been characterized using mercury intrusion porosimetry. Ca(OH) 2 formation has been determined using differential thermal analysis and metal leaching has been assessed in a series of static leach tests completed on monolithic samples. Pressed solidified materials have increased density, reduced porosity, and reduced Ca(OH) 2 . They exhibit increased resistance to acid attack in terms of sample weight loss during leaching due to reduced release of alkalis. Leaching of Zn and Pb is primarily determined by pH. A peak observed in Zn leaching from pressed samples is due to the effect of changing leachate pH on the dominant Zn species present

  9. Tjekkoslovakisk presse år 2

    Directory of Open Access Journals (Sweden)

    Rudolf Prevratil

    1991-09-01

    Full Text Available Danske teleselskaber overvejer at etablere sig som kabeloperatører i Polen, mens et amerikansk selskab allerede er igang i Warszawa og Krakow. Franske lokalradionetworks opretter filialer i Polen og Tjekko- slovakiet. Den tjekkiske statsradio stiller sendenet til rådighed for Radio Free Europe. Springer-koncernen opretter en "østtysk" pendant til Bild, hvis redaktionelle hovedlinje lægger sig op ad de dybe sociale frustrati- oner, der fulgte med DDR's indlemmelse i BDR. Maxwell, Hersant og Berlusconi m.fl. etablerer sig alene eller med lokale konstellationer inden for trykt presse i flere øst- og mellemeuropæiske stater. Samtidig for- søger den tidligere undergrundspresse at vinde økonomisk og politisk fodfæste inden for markedets og "det legale samfunds" rammer, i kon- kurrence med fortidens mediemutanter og vestlige mediekoncerner. Rudolf Prevratils artikel er en refleksion over en del af de problemer, primært af økonomisk og politisk art, som har tårnet sig op for den tjek- koslovakiske presse efter fløjlsrevolutionen i november 1989. Den giver et billede af dagens situation og får gennem sine analyser påvist, at etab- lingen af en demokratisk presse i Tjekkoslovakiet ikke alene er afhængig af "hjælp udefra", men i nok så høj grad forudsætter et net af sociale og kulturelle udviklingsprocesser, som både anerkender opgøret med for- tiden og vedkender sig den historiske arv. Artiklen er oversat fra engelsk af Per Jauert.

  10. Press Freedom on the Media Agenda

    OpenAIRE

    Pires, Terezinha Maria de Carvalho Cruz

    2007-01-01

    This article proposes to present a refl ection on the meanings constructed by the Brazilian written press regarding media and democracy. For this, it was necessary to recompose a specifi c journalistic event: the submission to the Brazilian Congress of a bill to create the Federal Journalism Council by the Brazilian President, Luiz Inácio Lula da Silva, at the request of the National Journalists Federation in August, 2004. This procedure gave rise to something rarely seen: the media were in the...

  11. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa

    2013-01-01

    Top WordPress guide, now fully updated for the latest WordPress release! This updated new edition comprises one of the largest collections of practical intermediate to advanced information on WordPress. Fully updated for the latest WordPress release, this in-depth book covers it all, from setting up your software to publishing your site, using SEO and social media, developing and using plug-ins, running multiple sites with WordPress, and more. Veteran author Lisa Sabin-Wilson is a top authority on WordPress, and she and her co-authors pack this book with essential and easy-to-follo

  12. Press briefing on results from the solar spacecraft SOHO

    Science.gov (United States)

    1998-04-01

    media representatives, with coffee 11:00 Press briefing starts: welcome to RAL and SOHO Richard Harrison, RAL, principal investigator for SOHO/CDS Congratulatory remarks Roger Bonnet, Director of Science, European Space Agency, Paris The watch on the Sun, including images of the day from SOHO Richard Harrison and link to Goddard Space Flight Center SOHO: technological highlights John Credland, Head of Scientific Projects, ESTEC, Noordwijk International cooperation David Bohlin, National Aeronautics and Space Administration, USA Scientific highlights and news from SOHO: Inside the Sun (helioseismology) :Douglas Gough, University of Cambridge The Sun's atmosphere : Eric Priest, University of St Andrews The solar wind and particles : Antoinette Galvin, University of New Hampshire ESA's science programme : Roger Bonnet, Director of Science, European Space Agency, Paris 12:00 Questions and answers 12:15 Press visit to the SOHO/CDS facility at RAL 12:45 Buffet lunch, with remarks by: Paul Murdin, Director of Science, British National Space Centre, and Head of Astronomy, PPARC 12:15-14:00 Opportunities for interviews 14:00 Resumption of Science Working Team technical meeting - Media representatives are welcome to attend. SOHO Science Presentations : D. Gough - Helioseismology E. Priest - Solar Atmosphere A. Galvin - Solar Wind and Particles 15:30-16:00 Discussion and closing remarks

  13. A Pedagogical Route for the Reading of the Press Opinion Article

    Directory of Open Access Journals (Sweden)

    Niura Maria Fontana

    2011-07-01

    Full Text Available A teaching sequence for the university level, focusing on the press opinion article as a genre, based on genre assumptions (Bakhtin, 1992, Bronckart, 2003 and on teaching sequences (Dolz, Noverraz e Schneuwly, 2004, comprehends the following activities: pre-reading (previous knowledge activation; hypotheses raising; reading (production conditions; constitution of text meaning; reading strategies; post-reading (relationships between text and reality; critical awareness. These were followed by chain genres production (press opinion article and related genres, promoting interaction among text, reader and writer, complemented by metacognitive reflection. Applied to two groups of freshmen, the sequence showed statistically significant results in the development of reading competence.

  14. Effect of hot pressing additives on the leachability of hot pressed sodium hydrous titanium oxide

    International Nuclear Information System (INIS)

    Valentine, T.M.; Sambell, R.A.J.

    1980-01-01

    Sodium hydrous titanium oxide is an ion exchange resin which can be used for immobilizing medium level waste (MLW) liquors. When hot pressed, it undergoes conversion to a ceramic. Three low melting point materials (borax, bismuth trioxide, and a mixture of PbO/CuO) were added to the (Na)HTiO and the effect that each of these had on aiding densification was assessed. Hot pressing temperature, applied pressure, and percentage addition of hot pressing aid were varied. Percentage open porosity, flexural strength, and leachability were measured. There was a linear relationship between the percentage open porosity and the logarithm of the leach rate for a constant percentage addition of each additive

  15. A Skeptic among Scholars: August Fruge on University Publishing.

    Science.gov (United States)

    Fruge, August

    This memoir describes August Fruge's 32 years as head of the University of California Press. Early chapters describe Berkeley, where the press is located, in the 1940s, conflicts with the Printing Department, the role of the faculty-run editorial committee, and setting new directions for the press. Three chapters describe looking for titles to…

  16. The press media and the risk perception

    International Nuclear Information System (INIS)

    Manetti, Cristiane Teixeira

    2009-01-01

    In this study it was identified the frequency of negative and positive news on the nuclear question in the press media. Due to the complexity of the matter, we opt to perform a study case that could illustrate the theoretical discussion presented in this research. Thus, due to the constant presence of news related to IPCC meeting, in the national and foreign press, we opt to focus our study on one year period just after the release of the 4th IPCC Report, in February of 2007. The research was centered only in the printed matters, since there is significant differences between the printed media and others, like TV, radio or web, restricting the use of the same bibliographical reference. In this study it was collected journalistic material involving the nuclear energy and was verified the predominant speech of the vehicles of communication and the sources of information. It was noted the predominance of positive articles, mainly due to the weight of the favorable speeches by authorities, cited as the most frequent in the paper. The negative approach almost always was assumed by the ONGs in general, as expected, due to the its well known position in the treatment of matters related to the nuclear energy. Also it is important to point out that all the tracked vehicles of information mixed positive and negative news articles on the subject; and evidences of hegemonic speech by official sources had been observed. (author)

  17. A CONCEPTUAL APPROACH ON PRESS CONFERENCE

    Directory of Open Access Journals (Sweden)

    Ioana Olariu

    2015-07-01

    Full Text Available A press conference is an important tool of public relations. The primary role of public relations is to manage a company’s reputation and help build public consent for its enterprises. The goal of PR is to develop and maintain goodwill with most, if not all, of its publics. Failure to do so may mean loss of customers and revenues, time lost dealing with complaints or lawsuits, and loss of esteem. A company’s publics change constantly. Well-executed public relations is an ongoing process that molds good long-term relationships and plays an important role in relationship marketing and integrated communications. Companies often call press conference when they have significant news to announce, such as the introduction of a new product or advertising campaign. Although used less often by organizations and corporations, this form of delivery can be very effective. The topic must be of major interest to a specific group before it is likely to gain coverage.

  18. Press Conference: LHC Restart, Season 2

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    PRESS BRIEFING ON THE LARGE HADRON COLLIDER (LHC) RE-START, SEASON 2 AT CERN, GLOBE OF SCIENCE AND INNOVATION Where :   http://cern.ch/directions   at the Globe of Science and Innovation When : Thursday, 12 March from 2.30 to 3.30pm - Open seating as from 2.15pm Speakers : CERN’s Director General, Rolf Heuer and Director of Accelerators, Frédérick Bordry, and representatives of the LHC experiments Webcast : https://webcast.web.cern.ch/webcast/ Dear Journalists, CERN is pleased to invite you to the above press briefing which will take place on Thursday 12 March, in the Globe of Science and Innovation, 1st floor, from 2.30 to 3.30pm. The Large Hadron Collider (LHC) is ready to start up for its second three-year run. The 27km LHC is the largest and most powerful particle accelerator in the world operating at a temperature of -217 degrees Centigrade and powered to a current of 11,000 amps. Run 2 of the LHC follows a two-year technical s...

  19. DCP Series

    Directory of Open Access Journals (Sweden)

    Philip Stearns

    2011-06-01

    Full Text Available Photo essay. A collection of Images produced by intentionally corrupting the circuitry of a Kodak DC280 2 MP digitalcamera. By rewiring the electronics of a digital camera, glitched images are produced in a manner that parallels chemically processing unexposed film or photographic paper to produce photographic images without exposure to light. The DCP Series of Digital Images are direct visualizations of data generated by a digital camera as it takes a picture. Electronic processes associated with the normal operations of the camera, which are usually taken for granted, are revealed through an act of intervention. The camera is turned inside­out through complexes of short­circuits, selected by the artist, transforming the camera from a picture taking device to a data capturing device that renders raw data (electronic signals as images. In essence, these images are snap­shots of electronic signals dancing through the camera's circuits, manually rerouted, written directly to the on­board memory device. Rather than seeing images of the world through a lens, we catch a glimpse of what the camera sees when it is forced to peer inside its own mind.

  20. Ductile Fracture Behaviour of Hot Isostatically Pressed Inconel 690 Superalloy

    Science.gov (United States)

    Cooper, A. J.; Brayshaw, W. J.; Sherry, A. H.

    2018-04-01

    Herein we assess the differences in Charpy impact behavior between Hot Isostatically Pressed and forged Inconel 690 alloy over the temperature range of 300 °C to - 196 °C. The impact toughness of forged 690 exhibited a relatively small temperature dependence, with a maximum difference of ca. 40 J measured between 300 °C and - 196 °C, whereas the HIP'd alloy exhibited a difference of approximately double that of the forged alloy over the same temperature range. We have conducted Charpy impact testing, tensile testing, and metallographic analyses on the as-received materials as well as fractography of the failed Charpy specimens in order to understand the mechanisms that cause the observed differences in material fracture properties. The work supports a recent series of studies which assess differences in fundamental fracture behavior between Hot Isostatically Pressed and forged austenitic stainless steel materials of equivalent grades, and the results obtained in this study are compared to those of the previous stainless steel investigations to paint a more general picture of the comparisons between HIP vs forged material fracture behavior. Inconel 690 was selected in this study since previous studies were unable to completely omit the effects of strain-induced martensitic transformation at the tip of the Chary V-notch from the fracture mechanism; Inconel 690 is unable to undergo strain-induced martensitic transformation due to the alloy's high nickel content, thereby providing a sister study with the omission of any martensitic transformation effects on ductile fracture behavior.

  1. Parto vertical em hospital universitário: série histórica, 1996 a 2005 Vertical-position births at a University Hospital: a time-series study, 1996 to 2005

    Directory of Open Access Journals (Sweden)

    Odaléa Maria Brüggemann

    2009-06-01

    Full Text Available OBJETIVOS: descrever a evolução do número de partos horizontais e verticais na maternidade do Hospital da Universidade Federal de Santa Catarina, Brasil, e avaliar a associação dos mesmos com a taxa de cesárea, de internações dos recém-nascidos em unidade de tratamento intensivo e semi-intensivo e as transfusões sanguíneas maternas. MÉTODOS: estudo descritivo -série histórica. Foram incluídos todos os partos, as internações dos recémnascidos na Unidade de Terapia Intensiva e as transfusões sanguíneas maternas ocorridas de 1996 até 2005. Para testar as tendências, utilizou-se o método de Prais-Winsten para regressão linear generalizada. RESULTADOS: em 1996 a porcentagem de partos verticais era 5,4% e em 2005 foi 52,3%. A variação média anual dos partos verticais foi de +20,8% (p=0,007 e dos partos horizontais de -15,2% (pOBJECTIVES: to describe the evolution of the number of horizontal and vertical births in the maternity ward of the University Hospital of the Federal University of Santa Catarina, Brazil and to evaluate their correlation with the rates for caesarian, for transfer of newborns to intensive and semi-intensive care units, and maternal blood transfusions. METHODS: a time-series study. All births resulting in newborns being transferred to the Intensive Care Unit, and the maternal blood transfusions obstetrics ward between 1996 and 2005 were included in this study. In order to test the tendencies, the Prais-Winsten generalized linear regression method was used. RESULTS: in 1996 the percentage for vertical births was 5.4% and in 2005 52.3%. The average annual variance for vertical births was +20.8% (p=0.007, and for horizontal births -15.2% (p<0.001. Caesarian births showed a tendency to stabilize (p=0.243. There was a decrease of in the number of newborns transferred to the neonatal intensive care unit, 6.1% per year (p=0.001 and in the need of maternal blood transfusions (5.2% -p<0.01. CONCLUSIONS: the

  2. Efeitos do intervalo de recuperação entre as séries sobre a pressão arterial após exercícios resistidos Efectos del intervalo de recuperación entre las series sobre la presión arterial luego de ejercicios de resistencia Effects of rest interval between exercise sets on blood pressure after resistance exercises

    Directory of Open Access Journals (Sweden)

    João Veloso

    2010-04-01

    Full Text Available FUNDAMENTO: Apesar de os estudos demonstrarem a ocorrência da hipotensão pós-exercício (HPE em exercícios resistidos, ainda não há consenso sobre um protocolo ideal. OBJETIVO: Avaliar os efeitos de diferentes intervalos de recuperação (IR entre séries de exercício resistido (ER na pressão arterial (PA pós-exercício. MÉTODOS: Dezesseis homens jovens sedentários e não hipertensos realizaram, de forma contrabalanceada três protocolos de ER com 1 (P1, 2 (P2 e 3 (P3 minutos de IR entre as séries, e um protocolo controle (CON. Os protocolos de ER consistiram em três séries de oito repetições em seis exercícios. As cargas utilizadas na 1ª, 2ª e 3ª série dos exercícios foram respectivamente 80, 70 e 60% de 1 repetição máxima (1RM. As medidas foram realizadas em repouso (REP, 15 (T15, 30 (T30, 45 (T45, 60 (T60, 75 (T75 e 90 (T90 minutos após a sessão. Foi realizada uma análise de variância fatorial (ANOVA com post hoc LSD. RESULTADOS: Não foi encontrada alteração significativa na PA sistólica após os protocolos. Foi encontrado um aumento significativo da PA diastólica, após o CON, nos momentos T45 e T90. Ocorreu redução significativa na PA diastólica após P1 e P3, com duração de 30 e 15 minutos respectivamente. Não foram encontradas diferenças significativas nas respostas da PA sistólica e diastólica entre os protocolos com diferentes IR. CONCLUSÃO: Parece que o IR não influencia a redução da PA sistólica após uma sessão de ER. No entanto, foi encontrada uma queda na PA diastólica (P1 e P3 com duração de até 30 minutos.FUNDAMENTO: A pesar de que los estudios demuestran la aparición de hipotensión post-ejercicio (HPE en Ejercicios de Resistencia, aún no existe consenso sobre un protocolo ideal. OBJETIVO: Evaluar los efectos de diferentes intervalos de recuperación (IR entre series de ejercicios de resistencia (ER en la presión arterial (PA post-ejercicio. MÉTODOS: Dieciséis hombres j

  3. Guardians of the public sphere? Political scandal and the press, 1979-97.

    Science.gov (United States)

    See, Helena

    2013-01-01

    The political scandals that beset the Conservative Party during the 1980s and 1990s constitute a valuable lens for examining two interrelated areas of study: the changing power relationship between government and press, and the changing interface between public and private in contemporary discourse. Close discursive analysis of the press coverage of these scandals--and of the libel actions that resulted from them--highlights the extent to which the Thatcher administration and the tabloid press propagated a shared moral discourse, founded on the repudiation of 'permissiveness', and a return to the ideal of the patriarchal nuclear family. This alliance transformed the way in which the Conservative message was communicated, disseminated, and indeed constituted, yet ultimately proved to be a double-edged sword. By catalysing the disintegration of the boundary between public and private in political life, and investing the press with the power to mould and configure public expectations of sexual morality, Thatcher laid the groundwork for the eventual fall of the Major administration, in the wake of a long series of financial and sexual scandals. As such, this article offers insights into a hitherto unexamined aspect of Thatcher's legacy, and the unprecedented influence of the press in late twentieth-century politics.

  4. Pressão arterial, excesso de peso e nível de atividade física em estudantes de universidade pública Blood pressure, excess weight and level of physical activity in students of a public university

    Directory of Open Access Journals (Sweden)

    Maria do Carmo de Carvalho e Martins

    2010-08-01

    Full Text Available FUNDAMENTO: A hipertensão arterial, o excesso de peso e o sedentarismo são importantes fatores de risco para doenças cardiovasculares e estão fortemente associados. OBJETIVO: Avaliar o estado nutricional, o nível de atividade física e os níveis de pressão arterial de estudantes da Universidade Federal do Piauí, em Teresina. MÉTODOS: Estudo transversal com amostra de 605 estudantes (46,1% do sexo masculino e 53,9% do feminino, com média de idade de 21,7 ± 3,7 anos. O estado nutricional global foi classificado pelo índice de massa corporal (IMC e a adiposidade central pela circunferência da cintura (CC. O nível de atividade física foi avaliado utilizando-se o Questionário Internacional de Atividade Física (IPAQ na versão curta. A pressão arterial aumentada foi definida como uma pressão sistólica > 140 mmHg e/ou diastólica > 90 mmHg. RESULTADOS: A prevalência de pressão arterial aumentada foi de 9,7%, sendo maior em homens. Excesso de peso (IMC > 25 kg/m² foi encontrado em 18,2% dos estudantes, sendo as proporções de sobrepeso e obesidade de 15,2% e 3%, respectivamente. Obesidade abdominal foi encontrada em 2,4% dos estudantes, independentemente do gênero, e o sedentarismo em 52%. A pressão arterial média aumentou com o incremento do IMC e da CC. Não houve associação entre os níveis de atividade física e pressão arterial. CONCLUSÃO: Houve associação entre aumento do peso corporal e da circunferência da cintura com maiores níveis de pressão arterial entre os pesquisados. É necessário estabelecer instrumentos de avaliação precoce do risco cardiovascular e promover orientação preventiva para esses jovens.BACKGROUND: High blood pressure, excess weight and sedentary lifestyle are important risk factors for cardiovascular diseases, and they are closely associated. OBJECTIVE: To evaluate the nutritional status, level of physical activity and blood pressure levels of students of Universidade Federal do Piau

  5. Framing alleged Islamist plots: a case study of British press coverage since 9/11

    OpenAIRE

    Matthews, James

    2015-01-01

    In the decade post 9/11 , the UK terrorist threat was associated with a series of high profile counter terrorism operations, linked to specific plots. These terrorism related episodes received significant media attention and,\\ud as a consequence, were a visible sign of the contemporary terrorist threat. This paper seeks to identify the dominant frames rendered in news media reporting on these episodes. Through a longitudinal study of UK press coverage, the analysis reveals that two prominent ...

  6. Short-term outcomes after EX-PRESS implantation versus trabeculectomy alone in patients with neovascular glaucoma

    OpenAIRE

    Shinohara, Yoichiro; Akiyama, Hideo; Magori, Mikiya; Kishi, Shoji

    2017-01-01

    Yoichiro Shinohara, Hideo Akiyama, Mikiya Magori, Shoji Kishi Department of Ophthalmology, Gunma University Graduate School of Medicine, Maebashi, Gunma, Japan Background: The purpose of this study was to investigate postoperative clinical outcomes in patients with neovascular glaucoma (NVG) who underwent trabeculectomy or EX-PRESS implantation and to identify predictors of successful EX-PRESS implantation. Methods: The study designed as a retrospective observational analysis and was set in...

  7. Role of the press in cold fusion saga

    International Nuclear Information System (INIS)

    Lindley, D.

    1992-01-01

    Press reports of cold-fusion discoveries in Utah and the pending publication of them in Nature magazine caught the associate editor of Nature, David Lindley, by surprise. Like most people, he had never heard of cold fusion. He learned that two papers, one from Steven Jones at Brigham Young University and one from Stanley Pons and Martin Fleischmann of the University of Utah, had been submitted to Nature and were undergoing the magazine's peer-review process. For weeks, Lindley was bombarded by reporters wanting daily progress reports. Many of the reporters considered the peer review a fuddy-duddy procedure meant primarily to impose conformity and suppress revolutionary ideas. In the end, Nature decided to publish the paper by Jones but not the one by Pons and Fleischmann. Because of the doubts cast on Pons and Fleischmann's findings, Nature's decision created no great public stir, Lindley recalls. But it did help reinforce in the authors the belief that they were heretics whom the establishment was out to destroy. Like politicians struggling at the polls, they blamed everyone but themselves, Lindley says. Above all, they blaimed the two all-time favorites - the media and the establishment

  8. Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges.

    Science.gov (United States)

    Singhal, Ayush; Leaman, Robert; Catlett, Natalie; Lemberger, Thomas; McEntyre, Johanna; Polson, Shawn; Xenarios, Ioannis; Arighi, Cecilia; Lu, Zhiyong

    2016-01-01

    Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system 'accuracy' remains a challenge and identify several additional common difficulties and potential research directions including (i) the 'scalability' issue due to the increasing need of mining information from millions of full-text articles, (ii) the 'interoperability' issue of integrating various text-mining systems into existing curation workflows and (iii) the 'reusability' issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. Finally, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators. Published by Oxford University Press 2016. This work is written by US Government employees and is in the public domain in the US.

  9. Searching for a Free Press in Indian Country.

    Science.gov (United States)

    Benton, Sherrole

    1994-01-01

    Describes the tribally controlled media's efforts to provide a form of checks and balances against the tribal council on behalf of the tribal community. Examines the issue of freedom of the tribal press, suggesting that tribal council's control of press's operating funds may limit press freedom. (MAB)

  10. STS-114: Discovery Launch Readiness Press Conference

    Science.gov (United States)

    2005-01-01

    Michael Griffin, NASA Administrator; Wayne Hale, Space Shuttle Deputy Program Manager; Mike Wetmore, Director of Shuttle Processing; and 1st Lieutenant Mindy Chavez, Launch Weather Officer-United States Air Force 45th Weather Squadron are in attendance for this STS-114 Discovery launch readiness press conference. The discussion begins with Wayne Hale bringing to the table a low level sensor device for everyone to view. He talks in detail about all of the extensive tests that were performed on these sensors and the completion of these ambient tests. Chavez presents her weather forecast for the launch day of July 26th 2005. Michael Griffin and Wayne Hale answer questions from the news media pertaining to the sensors and launch readiness. The video ends with footage of Pilot Jim Kelly and Commander Eileen Collins conducting test flights in a Shuttle Training Aircraft (STA) that simulates Space Shuttle landing.

  11. Newsroom Democracy: The Case for Independence of the Press. Monograph Series, No. 2.

    Science.gov (United States)

    Schwoebel, Jean; Hardt, Hanno, Ed.

    Today there is a growing realization among journalists that providing information should be a real service in the public interest, which is free from the domination of private interests, and that there should be structures that guarantee the independence of journalists and the promotion of responsible and responsive journalism. In France, the…

  12. Summary of the Hungarian Provincial Press (7-12 June 1960) (130th of the Series)

    Science.gov (United States)

    1960-07-29

    war and that the farmers* cooperative movement would weaken. The weak and un- educated party organizations had been unable to inter- pret the events...III. BCOMOMIC INFORMATION General Sconomic Information , ■ - ■"" "r;:i;:Ihe small industrial cooperative movement is develo- . pi^g ver

  13. Groundwork for a Better Vocabulary. Second Edition. Instructor's Edition. Townsend Press Vocabulary Series.

    Science.gov (United States)

    Smith, R. Kent; Johnson, Beth; Mohr, Carole

    This instructor's edition of a vocabulary textbook for college students, who read at the fifth to eighth grade level, features 25 chapters and teaches 250 basic words. The first and third chapters in each unit contain word-part practices. The second and fourth chapters in each unit contain synonym-antonym practices. The book's last chapter in each…

  14. Idealized Compression Ratio for a Screw Briquetting Press

    Directory of Open Access Journals (Sweden)

    Peter Biath

    2012-01-01

    Full Text Available This paper deals with issues in determining the ideal compression ratio for a screw briquetting press. First, the principles of operation and a basic description of the main parts of a screw briquetting press are introduced. The next section describes the pressing space by means of 3D software. The pressing space was created using a Boolean subtract function. The final section of the paper measures the partial volumes of the pressing chamber in CATIA V5 by function of measuring. The measured values are substituted into the formula for the compression ratio, and the resulting evaluations are presented in the diagram in the conclusion of this paper.

  15. Properties of hot pressed MgB2/Ti tapes

    International Nuclear Information System (INIS)

    Kovac, P.; Husek, I.; Melisek, T.; Fedor, J.; Cambel, V.; Morawski, A.; Kario, A.

    2009-01-01

    Hot axial and hot isostatic pressing was applied for single-core MgB 2 /Ti tapes. Differences in transport current density, n-exponents and critical current anisotropy are discussed and related to the grain connectivity influenced by pressing. The magnetic Hall probe scanning measurements allowed observing the isolated regions for axially hot pressed sample attributed to the longitudinally oriented cracks introduced by pressing. The highest current densities were measured for the tape subjected to hot isostatic pressing due to improved connectivity.

  16. Probabilidades para pressão atmosférica no município de Mossoró-RN

    Directory of Open Access Journals (Sweden)

    R. P. Sousa

    2015-12-01

    Full Text Available Objetivou-se elaborar uma tabela de probabilidades da ocorrência de valores mensais da pressão atmosférica em milibar, para Mossoró, RN, Brasil, a partir dos registros diários das pressões atmosféricas obtidas na Estação Meteorológica da Universidade Federal Rural do Semi-Árido em Mossoró, RN, referentes a uma série histórica de trinta e oito anos (1970-2007. A pressão atmosférica mensal em milibar foi estimada utilizando o modelo da distribuição densidade de probabilidade normal, para os níveis de 1% a 95% de probabilidade. Tendo-se em conta os resultados dos testes de aderência a 10% de probabilidade e utilizando-se o Logaritmo da Máxima Verossimilhança, pode-se concluir pela adequabilidade do processo de construção da Tabela de probabilidades, e que esta representa importante subsídio no planejamento das atividades agropecuárias na região, tirando o máximo proveito dos seus benefícios e evitando os seus efeitos danosos.Probability table for atmospheric pressure  in city of Mossoró-RNAbstract: The aim of this study was to develop a table of probabilities of occurrence of monthly values of atmospheric pressure in millibars, to Natal, RN, Brazil, from the daily records of atmospheric pressures obtained at the Meteorological Station of the Federal Rural University of the Semi-Arid in Mossley, RN, referring to a historical series thirty-eight-years (1970-2007. The atmospheric pressure in millibars monthly was estimated using the model distribution normal probability density to levels of 1% to 95% probability. Try into account the results of the compliance tests at 10% probability and using the logarithm of Maximum Likelihood, we can conclude the suitability of the construction of the table of probabilities, and that this is an important benefit in the planning of agricultural activities in the region, making the most its benefits and avoid its harmful effects. 

  17. Treatment of the press residues of pressed grapes on an industrial scale

    Energy Technology Data Exchange (ETDEWEB)

    1978-04-24

    EtOH and tartaric acid are recovered from press residues of grapes by distillation and concentration of the EtOH and extraction of the dried residue after removal of seeds with a mixture of H/sub 2/O and mineral acid. Vegetable oil is extracted from the seeds. Collidal substances are coagulated by roasting prior to extraction of tartaric acid. The grape skins are recovered in flake form.

  18. Press conference of the 15 october 2002; Conference de presse du 15 octobre 2002

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    Facing the public hostile purposes of october 2002, concerning the renewable energies, Andre Antolini, President of the renewable energies syndicate, proposed a press conference to give information, data and realizations on the renewable energies. The text of the conference is presented, as data on employment, biofuels, the wind energy, the hydro-electricity the greenhouse effect fight, the public opinion, the solar heating, the photovoltaic and the future projects and electric power supply for 2010. (A.L.B.)

  19. Hot isostatic press waste option study report

    International Nuclear Information System (INIS)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065

  20. [Work disability in public press professions].

    Science.gov (United States)

    Akermann, S

    2002-09-01

    In this study more than 1,000 cases of long-term disability among members of the press and media were evaluated. Mental disorders were the main cause of disability in almost every fourth case. In women psychiatric illnesses were even more important. The most common diagnosis was that of a depressive disorder which accounted for more than half of all psychiatric cases. The causes of disability of other insurance systems such as the German social security scheme and the pension and disability plan for the medical profession were compared. Mental illnesses are the leading cause of disability in white collar workers and orthopaedic illnesses, especially disorders of the vertebral column, are the leading cause in blue collar workers, as one might have expected. In females mental disorders are even more common than in men whereas men tend to have more cardiovascular problems than women. In this study also some interesting features regarding disability caused by various illnesses after long-term follow-up were found. This opens unknown perspectives allowing new assessment of diseases and eventually will enable the actuary to price medical diagnoses for disability insurance.

  1. Pressing problems of measurement of ionizing radiations

    International Nuclear Information System (INIS)

    Fominykh, V.I.; Yudin, M.F.

    1993-01-01

    The current system for ensuring the unity of measurements in the Russian Federation and countries of the former Soviet Union ensures a high quality of dosimetric, radiometric, and spectrometric measurements in accordance with the recommendations of the Consulative Committee on Standards for Measurements of Ionizing Radiations of the International Bureau of Weights and Measures (IBWM), International Organization on Radiological Units (ICRU), International Commission on Radiological Protection (ICRP), International Organization on Legislative Metrology (IOLM), International Atomic Energy Agency (IAEA), World Health Organization (WHO), etc. Frequent collation of the national primary and secondary standards of Russia with those of IBWM and the leading national laboratories of the world facilitate mutual verification of the measurements of ionizing radiations. The scope of scientific and scientific-technical problems that can be solved by using ionizing radiations has expanded significantly in recent years. In this paper the authors consider some pressing problems of the metrology of ionizing radiations which have arisen as a result of this expansion. These include the need for unity and reliability of measurements involved in radiation protection, the measurement of low doses involving low dose rates, ensuring the unity of measurements when monitoring the radiological security of the population, the need for more uniformity on an international scale regarding the basic physical quantities and their units for characterizing radiation fields, determination of the accuracy of measurement of the radiation dose absorbed by an irradiated tissue or organ, and the development of complex standards for ionizing radiations. 5 refs., 1 tab

  2. Hot isostatic press waste option study report

    Energy Technology Data Exchange (ETDEWEB)

    Russell, N.E.; Taylor, D.D.

    1998-02-01

    A Settlement Agreement between the Department of Energy and the State of Idaho mandates that all high-level radioactive waste now stored at the Idaho Chemical Processing Plant be treated so that it is ready to move out of Idaho for disposal by the target date of 2035. This study investigates the immobilization of all Idaho Chemical Processing Plant calcine, including calcined sodium bearing waste, via the process known as hot isostatic press, which produces compact solid waste forms by means of high temperature and pressure (1,050 C and 20,000 psi), as the treatment method for complying with the settlement agreement. The final waste product would be contained in stainless-steel canisters, the same type used at the Savannah River Site for vitrified waste, and stored at the Idaho National Engineering and Environmental Laboratory until a national geological repository becomes available for its disposal. The waste processing period is from 2013 through 2032, and disposal at the High Level Waste repository will probably begin sometime after 2065.

  3. Distal clavicular osteolysis in adults: association with bench pressing intensity

    International Nuclear Information System (INIS)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B.; Ciccotti, Michael G.

    2016-01-01

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p 1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  4. Forecasting Enrollments with Fuzzy Time Series.

    Science.gov (United States)

    Song, Qiang; Chissom, Brad S.

    The concept of fuzzy time series is introduced and used to forecast the enrollment of a university. Fuzzy time series, an aspect of fuzzy set theory, forecasts enrollment using a first-order time-invariant model. To evaluate the model, the conventional linear regression technique is applied and the predicted values obtained are compared to the…

  5. Zinc coated sheet steel for press hardening

    Science.gov (United States)

    Ghanbari, Zahra N.

    Galvanized steels are of interest to enhance corrosion resistance of press-hardened steels, but concerns related to liquid metal embrittlement have been raised. The objective of this study was to assess the soak time and temperature conditions relevant to the hot-stamping process during which Zn penetration did or did not occur in galvanized 22MnB5 press-hardening steel. A GleebleRTM 3500 was used to heat treat samples using hold times and temperatures similar to those used in industrial hot-stamping. Deformation at both elevated temperature and room temperature were conducted to assess the coating and substrate behavior related to forming (at high temperature) and service (at room temperature). The extent of alloying between the coating and substrate was assessed on undeformed samples heat treated under similar conditions to the deformed samples. The coating transitioned from an α + Gamma1 composition to an α (bcc Fe-Zn) phase with increased soak time. This transition likely corresponded to a decrease in availability of Zn-rich liquid in the coating during elevated temperature deformation. Penetration of Zn into the substrate sheet in the undeformed condition was not observed for any of the processing conditions examined. The number and depth of cracks in the coating and substrate steel was also measured in the hot-ductility samples. The number of cracks appeared to increase, while the depth of cracks appeared to decrease, with increasing soak time and increasing soak temperature. The crack depth appeared to be minimized in the sample soaked at the highest soak temperature (900 °C) for intermediate and extended soak times (300 s or 600 s). Zn penetration into the substrate steel was observed in the hot-ductility samples soaked at each hold temperature for the shortest soak time (10 s) before being deformed at elevated temperature. Reduction of area and elongation measurements showed that the coated sample soaked at the highest temperature and longest soak time

  6. Hot pressing of B4C/SiC composites

    International Nuclear Information System (INIS)

    Sahin, F.C.; Turhan, E.; Yesilcubuk, S.A.; Addemir, O.

    2005-01-01

    B 4 C/SiC ceramic composites containing 10-20-30 vol % SiC were prepared by hot pressing method. The effect of SiC addition and hot pressing temperature on sintering behaviour and mechanical properties of hot pressed composites were investigated. Microstructures of hot pressed samples were examined by SEM technique. Three different temperatures (2100 deg. C, 2200 deg. C and 2250 deg. C) were used to optimize hot pressing temperature applying 100 MPa pressure under argon atmosphere during the sintering procedure. The highest relative density of 98.44 % was obtained by hot pressing at 2250 deg. C. However, bending strengths of B 4 C/SiC composite samples were lower than monolithic B 4 C in all experimental conditions. (authors)

  7. Auxiliary equipment and special techniques used for hot isostatic pressing

    International Nuclear Information System (INIS)

    Pfeffer, J.B.; Odebo, U.

    1977-01-01

    The largest use for hot isostatic pressing (HIP) in production is in the consolidation of powder. In principle, powder is filled into a capsule of metal or glass, and the capsule is evacuated, sealed and loaded into the hot isostatic press. Consolidation takes place in the hot isostatic press, at which time the consolidated capsule is removed from the press and the encapsulation material is removed from the consolidated powder body. In both densification and defect healing, HIP is carried out without encapsulating the material. This is possible as the materials that lend themselves to HIP healing initially have a high density without communicating pores; therefore, the material acts as its own capsule. Considerations outside of the hot isostatic press that must be taken into account are examined. Information is included on powder manufacture, fabrication of capsules, powder handling, capsule sealing, and loading and unloading the press

  8. High density high-TC ceramic superconductors by hot pressing

    International Nuclear Information System (INIS)

    Mak, S.; Chaklader, A.C.D.

    1989-01-01

    High density and high T C superconductor specimens, YBa 2 Cu 3 O x , have been produced by hot-pressing. The factors studied are the effect of hot pressing on the density, the oxygen stoichiometry, the crystal structure, and the critical temperature. Hot pressing followed by heat treatment increased the density of the specimen to 93%. The hot pressing itself did not significantly affect the oxygen content in the specimen, and although the crystal structure appeared to be orthorhombic, the specimens were not superconducting above liquid nitrogen temperature. The superconductivity was restored after head treatment in oxygen. The highest critical temperature (T C ) of the hot pressed pellets was 82K, which was slightly lower than the T C that could be obtained with the cold pressed/sintered pellets. (6 refs., 5 figs., tab.)

  9. Muscle activation when performing the chest press and shoulder press on a stable bench vs. a Swiss ball.

    Science.gov (United States)

    Uribe, Brandon P; Coburn, Jared W; Brown, Lee E; Judelson, Daniel A; Khamoui, Andy V; Nguyen, Diamond

    2010-04-01

    The aim of this study was to examine the effects of a stable surface (bench) vs. an unstable surface (Swiss ball) on muscle activation when performing the dumbbell chest press and shoulder press. Sixteen healthy men (24.19 +/- 2.17 years) performed 1 repetition maximum (1RM) tests for the chest press and shoulder press on a stable surface. A minimum of 48 hours post 1RM, subjects returned to perform 3 consecutive repetitions each of the chest press and shoulder press at 80% 1RM under 4 different randomized conditions (chest press on bench, chest press on Swiss ball, shoulder press on bench, shoulder press on Swiss ball). Electromyography was used to assess muscle activation of the anterior deltoid, pectoralis major, and rectus abdominus. The results revealed no significant difference in muscle activation between surface types for either exercise. This suggests that using an unstable surface neither improves nor impairs muscle activation under the current conditions. Coaches and other practitioners can expect similar muscle activation when using a Swiss ball vs. a bench.

  10. Room temperature nanoindentation creep of hot-pressed B6O

    CSIR Research Space (South Africa)

    Machaka, R

    2014-06-01

    Full Text Available of the nanoindentation creep behavior in B6O ceramics. 1 Room temperature nanoindentation creep of hot-pressed B6O Ronald Machakaa,b,* , Trevor E. Derryb,d, Iakovos Sigalasb,c aLight Metals, Materials Science and Manufacturing, Council for Scientific..., University of the Witwatersrand, Private Bag 3, Wits, Johannesburg 2050, South Africa dSchool of Physics, University of the Witwatersrand, Private Bag 3, Wits, Johannesburg 2050, 2050 South Africa Abstract: Nanoindentation has become a widely...

  11. Normalized knee-extension strength or leg-press power after fast-track total knee arthroplasty

    DEFF Research Database (Denmark)

    Aalund, Peter K; Larsen, Kristian; Hansen, Torben Bæk

    2013-01-01

    OBJECTIVE: (s): To investigate which of the two muscle-impairment measures for the operated leg, normalized knee extension strength or leg press power, is more closely associated to performance-based and self-reported measures of function shortly following total knee arthroplasty (TKA). DESIGN...... and dynamic leg presses to determine their body-mass normalized knee extension strength and leg press power, respectively. The 10-m fast speed walking and 30-s chair stand tests were used to determine performance-based function, while the Western Ontario McMaster University Osteoarthritis Index (WOMAC......) and Oxford Knee scores were used to determine self-reported function. RESULTS: Normalized leg press power was more closely associated to both performance-based (r=.82, P...

  12. Legal Protection To The Infotainment Of Press Development In Indonesia

    Directory of Open Access Journals (Sweden)

    Anwar Fuadi

    2015-08-01

    Full Text Available Abstract In the socio-political life the press has become an integral part in democratic life. The press has become one of the means for citizens to bring their thoughts and opinions. Nowadays there is a tendency to increase the quantity of press publications sharp but not accompanied by a statement of the quality of journalism. The objective of this research is to understand the essence of the infotainment liability as a mass media in order to construct a freedom of the press principle which has legitimacy within the legal system of the press in Indonesia. The type of research used in this paper is normative research or also known as doctrinal research by reviewing the legal protection to the infotainment as a mass media in Indonesia. The outcomes of the research indicate that the role of infotainment in the legal system of the press in Indonesia refers to the legal construction of institutional and infotainment organizers itself. Legal liability of Infotainment essentially can be seen from the press obligations stipulated in the Law No. 40 of 1999 regarding the Press Law No. 32 of 2002 regarding Broadcasting as well as the Journalists Code of Ethics which support freedom of the press and expression.

  13. WordPress all-in-one for dummies

    CERN Document Server

    Sabin-Wilson, Lisa; Palmer, Kevin

    2011-01-01

    A convenient how-to guide for maximizing your WordPress experience. WordPress is a state-of-the-art blog publishing platform with nearly ten million active installations. Eight minibooks provide you with expanded coverage of the most important topics to the WordPress community, such as WordPress basics, theme designs, plug-in development, social media integration, SEO, customization, and running multiple sites. Veteran author Lisa Sabin-Wilson leads an authoritative team of authors who offer their unique knowledge and skillset while sharing invaluable advice for maximizing your site's potentia

  14. Effects of pressing temperature and initial microstructure on the equal channel angular pressing of Ti-6Al-4V alloy

    International Nuclear Information System (INIS)

    Ko, Y.G.; Lee, Y.H.; Jung, W.S.; Shin, D.H.; Lee, C.S.

    2003-01-01

    The effects of pressing temperature and initial microstructure on the equal channel angular (ECA) pressing of Ti-6Al-4V alloy were investigated in this study. The ECA pressing was carried out isothermally with route C at 500 C, 600 C and 700 C for two typical microstructures, i.e., the Widmanstaetten microstructure and the equiaxed microstructure. The results showed that ECA pressing at 600 C and 700 C was successful without producing any noticeable segment at the specimen surfaces, while a large amount of surface segments were produced at 500 C. After 1 pass pressing at 600 C, the equiaxed microstructure showed more uniform material flow at the surface than the Widmanstaetten microstructure. However, this microstructural influence was diminished with increase of the number of the ECA pressing. A flow-localization parameter that quantifies the flow non-uniform tendency in case of flow softening materials was used to explain the different results in each microstructure. (orig.)

  15. The Public, the Press, and Celebrities in The Return of Sherlock Holmes

    Directory of Open Access Journals (Sweden)

    Thomas Vranken

    2015-11-01

    Full Text Available Arthur Conan Doyle and his consulting detective had been famous for more than ten years when Doyle came to write The Return of Sherlock Holmes. In the following essay, I argue that this experience of fame shaped the composition of the third series of Holmes stories, in which the detective is resurrected a decade after going over the Reichenbach Falls. The essay approaches celebrity as a competitive interaction in which the public, the press, and the celebrity vie for control. It is argued that the stories in The Return of Sherlock Holmes work to empower the various celebrities that they portray – including not just Holmes but also well-known aristocrats, statesmen, scholars, and female ‘beauties’ – and to disempower their rival co-participants in the celebrity dynamic: the public and the press.

  16. Science and Glyphosate: Questioning Orders. An Investigation in the Press in the Argentine Context

    Directory of Open Access Journals (Sweden)

    María Paula Blois

    2016-06-01

    Full Text Available In April 2009, the embryologist Andrés Carrasco made public in the newspaper Página 12 a research conducted in his laboratory on the damage caused by glyphosate, a key input for GMOs based agriculture. Released in the press before being subjected to peer review, research caused approvals and disproofs. Focusing on the actions of this embryologist and some events that took place following the publication in the newspaper, this work research the place of scientist that produced scientific knowledge while questioning his own role and his science. Pointing out that the study on glyphosate, the publication in the press and the question of the meaning of science that this scientist arises with insistence are part of the questioning of an order of things, concludes with a series of reflections about the possibility and type of questioning and possible changes.

  17. The LNG industry in 2011. Press revue

    International Nuclear Information System (INIS)

    2012-05-01

    The outlook of the LNG industry in 2011 is presented as a revue of press articles: The role of LNG as a flexible and secure energy source as well as the prompt response to provide back-up through additional supplies and cargo diversions to compensate for the sudden loss of nuclear capacity in Japan - with sellers exercising due price restraint in view of the human tragedy - has been a credit to the industry. The increase in production capacity in 2009 and 2010, in particular from Qatar, had permitted the necessary buffer to cope much better with the demand surge than during past disruptions (such as the aftermath of the Chuetsu earthquake in late 2007). Undoubtedly, the marked shift over the last decade in the industry's prevailing business model towards global trade, destination flexibility and portfolio play has also facilitated the rapid response. As the total volume of LNG trade is very much determined by the availability of supply, 2011 has seen a growth of 9.4% over 2010, mainly as a result of the full availability of the six Qatar mega-trains over the past year. On the demand side the two traditional basins have shown very contrasting trends: 15% higher LNG off-take in Asia (the five major markets all increasing between 37.4% and 8.9%), versus a 1.7% decrease in the Atlantic Basin. Cargo diversions and an increasing number of reloads have boosted the exports from the Atlantic Basin to Asia in 2011 to more than 14 million tons (equivalent to more than 200 large size cargoes). Remarkable is also the fast growth in new markets in Latin America and in the Middle East - albeit from a small base - with counter-seasonal but varying demand, offering attractive arbitrage opportunities to portfolio play. Not surprising then that 2011 has seen another hike in spot and short-term trade, not just in absolute terms but also as a percentage of total trade (50% over 2010, 25.4% of total trade). The outlook for LNG is strong and its global demand prospects further

  18. The Politics of Universal Health Coverage in Low- and Middle-Income Countries: A Framework for Evaluation and Action.

    Science.gov (United States)

    Fox, Ashley M; Reich, Michael R

    2015-10-01

    Universal health coverage has recently become a top item on the global health agenda pressed by multilateral and donor organizations, as disenchantment grows with vertical, disease-specific health programs. This increasing focus on universal health coverage has brought renewed attention to the role of domestic politics and the interaction between domestic and international relations in the health reform process. This article proposes a theory-based framework for analyzing the politics of health reform for universal health coverage, according to four stages in the policy cycle (agenda setting, design, adoption, and implementation) and four variables that affect reform (interests, institutions, ideas, and ideology). This framework can assist global health policy researchers, multilateral organization officials, and national policy makers in navigating the complex political waters of health reforms aimed at achieving universal health coverage. To derive the framework, we critically review the theoretical and applied literature on health policy reform in developing countries and illustrate the framework with examples of health reforms moving toward universal coverage in low- and middle-income countries. We offer a series of lessons stemming from these experiences to date. Copyright © 2015 by Duke University Press.

  19. Distal clavicular osteolysis in adults: association with bench pressing intensity

    Energy Technology Data Exchange (ETDEWEB)

    Nevalainen, Mika T.; Morrison, William B.; Zoga, Adam C.; Roedl, Johannes B. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Musculoskeletal Imaging and Interventions, Department of Radiology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Ciccotti, Michael G. [Sidney Kimmel Medical College at Thomas Jefferson University, Division of Sports Medicine, Department of Orthopedic Surgery, Thomas Jefferson University Hospital, Rothman Institute, Philadelphia, PA (United States)

    2016-11-15

    To investigate the association between distal clavicular osteolysis (DCO) and bench pressing intensity. From a retrospective review of MRI shoulder reports of individuals between 20 and 40 years of age, 262 male patients with DCO and 227 age-matched male patients without DCO were selected. All patients had completed a bench pressing questionnaire. The patients' bench pressing frequency (times per week), duration (years of bench pressing), bench pressing weight (maximum bench pressing weight with one repetition = 1RM) and the ratio of bench pressing weight to body weight were compared between both groups using Chi-square and Mann-Whitney tests. The results showed that 56 % (146/262) of patients with DCO were high-intensity bench pressers (1RM more than 1.5 times the body weight) compared to 6 % (14/227) in patients without DCO. High-intensity bench pressing was a risk factor for DCO (OR = 19; 95 %CI = 11-35; p < 0.001). Low-intensity bench pressing (1RM less than 1.5 times the body weight) was not a risk factor for DCO (OR = 0.6; 95 % CI = 0.4-0.8). High frequency (>1 x /week) and duration (>5 years) of bench pressing were risk factors. In bench pressers who suffered from DCO, the mean 1RM was 283 lbs (±SD 57) compared to 209 lbs (±SD 60) in bench pressers not affected by DCO (p < 0.001, Mann-Whitney). High-intensity, but not low-intensity bench pressing is a risk factor for DCO. (orig.)

  20. Brine migration in hot-pressed polycrystalline sodium chloride

    International Nuclear Information System (INIS)

    Biggers, J.V.; Dayton, G.O.

    1982-12-01

    This report describes experiments designed to provide data on brine migration in polycrystalline salt. Polycrystalling samples of various grain sizes, density, and purity were prepared from several commercial-grade salts by hot-pressing. Three distinct experimental set-ups were used to place salt billets in an induced thermal gradient in contact with brine source. The test designs varied primarily in the way in which the thermal gradient was applied and monitored and the way in which brine migration was determined. All migration was in enclosed vessels which precluded visual observation of brine movement through the microstructure. Migration velocities were estimated either by the timed appearance of brine at the hot face of the sample, or by determination of the penetration distance of migration artifacts in the microstructure after tests of fixed duration. For various reasons both of these methods were subject to a large degree of error. Our results suggest, however, that the migration velocity in dense polycrystalline salt may be at least an order of magnitude greater than that suggested by single-crystal experiments. Microstructural analysis shows that brine prefers to migrate along paths of high crystalline activity such as grain and subgrain boundaries and is dispersed rather quickly in the microstructure. A series of tests were performed using various types of tracers in brine in order to flag migration paths and locate brine in the microstructure more decisively. These attempts failed and it appears that only the aqueous portion of the brine moves through the microstructure with the dissolved ions being lost and replaced rather quickly. This suggests the use of deuterium as a tracer in future work

  1. Press touch code: A finger press based screen size independent authentication scheme for smart devices

    Science.gov (United States)

    Ranak, M. S. A. Noman; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z.

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)—a.k.a., Force Touch in Apple’s MacBook, Apple Watch, ZTE’s Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on—is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme. PMID:29084262

  2. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Science.gov (United States)

    Ranak, M S A Noman; Azad, Saiful; Nor, Nur Nadiah Hanim Binti Mohd; Zamli, Kamal Z

    2017-01-01

    Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT)-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC). We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  3. Densification of boron carbide at relatively low temperatures by hot pressing and hot isostatic pressing

    International Nuclear Information System (INIS)

    Telle, R.

    1988-01-01

    The poor sinterability of B 4 C limits its widespread application because both high temperatures and high pressures are required for a complete densification. Moreover, B 4 C suffers from a low strength and fracture toughness, possesses, however, a high potential because of its extreme hardness. Reaction hot pressing of B 4 C-WC-TiC-Si-Co mixtures resulting in B 4 C-TiB 2 -W 2 B 5 composites of high density exhibit remarkable mechanical properties. The influence of hot isostatic pressing (HIP) on the microstructure and the mechanical properties is investigated in cooperation with participants of the COST 503 activities and related to the strengthening and toughening mechanisms. Difficulties during densification by HIP arise from the evaporation of adsorbed volatiles as well as from the strong swelling of the powder compact due to the sintering reaction. Several HIP cycle designs were tested in order to prevent the bloating of the capsule and to control internal stresses due to the misfit of the thermal expansion of the entire phases. In comparison to single phase B 4 C ceramics, bending strength was improved to 1030 MPa, K Ic to 5.2 MPa/m, while hardness was comparable with HV1=38 GPa. Wear test were performed and related to the toughening mechanisms. (orig.) With 56 refs., 9 tabs., 64 figs

  4. Press touch code: A finger press based screen size independent authentication scheme for smart devices.

    Directory of Open Access Journals (Sweden)

    M S A Noman Ranak

    Full Text Available Due to recent advancements and appealing applications, the purchase rate of smart devices is increasing at a higher rate. Parallely, the security related threats and attacks are also increasing at a greater ratio on these devices. As a result, a considerable number of attacks have been noted in the recent past. To resist these attacks, many password-based authentication schemes are proposed. However, most of these schemes are not screen size independent; whereas, smart devices come in different sizes. Specifically, they are not suitable for miniature smart devices due to the small screen size and/or lack of full sized keyboards. In this paper, we propose a new screen size independent password-based authentication scheme, which also offers an affordable defense against shoulder surfing, brute force, and smudge attacks. In the proposed scheme, the Press Touch (PT-a.k.a., Force Touch in Apple's MacBook, Apple Watch, ZTE's Axon 7 phone; 3D Touch in iPhone 6 and 7; and so on-is transformed into a new type of code, named Press Touch Code (PTC. We design and implement three variants of it, namely mono-PTC, multi-PTC, and multi-PTC with Grid, on the Android Operating System. An in-lab experiment and a comprehensive survey have been conducted on 105 participants to demonstrate the effectiveness of the proposed scheme.

  5. Pierre Swiggers, Les Conceptions linguistiques des Encyclopédistes, Etude sur Ia constitution d'une théorie de Ia grammaire au siècle des Lumières, Sammlung Groos 21, Julius Groos Verlag-Heidelberg- Leuven University Press, Heidelberg 1984, 165 pp.

    Directory of Open Access Journals (Sweden)

    Pavao Tekavčić

    1986-12-01

    Full Text Available Le petit livre dont nous présentons ici lecompte rendu est I'oeuvre du jeune savant Pierre Swiggers, chercheur qualifié au Fonds national beige de la recherche scientifique, linguiste et philologue qui nous a donné dejà une serie d'études, sur le siècle des Lumières (L'Encyclopédie et la linguistique au XVI/le siècle, «Linguisti­ cae Investigationes» 311979; La grammaire dans /'Encyclopédie: Etat actuel des étu­ des, «Beiträge zur romanischen Philologie» 20/1981; La théorie syntaxique dans  /'Encyclopédie, «Lingua e stile» 18/1983 etc., sur l'historiographie linguistique (tout récemment: L'article en français: l'histoire d'un problème grammatical, «Re­ vue de Linguistique Romane» 49/1985, sur la linguistique du XVIIe et du XVIIIe siècle en général, etc. L'Auteur est done bien un spécialiste qualifié pour offrir au public linguistique une synthèse de ses recherches sur les théories grammaticales dans l'Encyclopédie.

  6. Atlas of hot isostatic beryllium powder pressing diagrams

    International Nuclear Information System (INIS)

    Stoev, P.I.; Papirov, I.I.; Tikhinskij, G.F.; Vasil'ev, A.A.

    1995-01-01

    Diagrams of hot isotopic pressing (HIP) of beryllium powder with different grain size in a wide range of pressing parameters are built by mathematical modeling methods. The HIP diagrams presented are divided into 3 groups: parametric dependencies D=f(P,T); technological HIP diagrams; compacting mechanisms. The created data bank permits to optimise beryllium powder HIP with changing parameters. 4 refs., 23 figs

  7. Simulation Model of Automated Peat Briquetting Press Drive

    Directory of Open Access Journals (Sweden)

    A. A. Marozka

    2012-01-01

    Full Text Available The paper presents the developed fully functional simulation model of an automated peat briquetting press drive. The given model makes it possible to reduce financial and time costs while developing, designing and operating a double-stamp peat briquetting press drive.

  8. Criticism of the Press: Its Social, Psychological and Political Origins.

    Science.gov (United States)

    Becker, Lee B.; And Others

    This study examines data from several national polls about press coverage during the Watergate scandal, in order to assess the origins of press criticism. The polls were conducted between 28 September and 6 October 1973, during June 1974, and in August 1974. The data suggest that political variables--particularly support of Nixon, party…

  9. Design, manufacture and performance research of double acting hydraulic press

    OpenAIRE

    Koc, Erdem; Unver, Ertu; Ozturk, Hidayet

    1990-01-01

    This research presents the design and production of a double acting 40 tons capacity hydraulic press. The issues in the design, engineering manufacturing of the hydraulic press are reported specifically on both cylinders generating the same pressure and velocity using a solenoid directional control valve and a flow separating valve. (In Turkish)

  10. New Realities for Scholarly Presses in Trying Economic Times

    Science.gov (United States)

    Blakesley, David

    2014-01-01

    The author explains that Parlor Press is an independent publisher and distributor of scholarly and trade books in print and digital formats. It was founded in 2002 to address the need for an alternative scholarly, academic press attentive to emergent ideas and forms while maintaining the highest possible standards of quality, credibility, and…

  11. News from the Library: PressDisplay on mobile devices!

    CERN Multimedia

    CERN Library

    2013-01-01

    You are probably already using PressDisplay to read newspapers online, but for those of you who are not yet aware of this service, PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published.   Whether you are an experienced user or a beginner, we have good news concerning PressDisplay: our license now permits you to download complete newspaper issues to your mobile devices and read them offline wherever you like. To do that, you have to use the mobile app PressReader. Instructions on how to install the PressReader app are available here: For Ipad For Android smartphone For Android tablet For Windows 8 devices For BlackBerry Playbook For Android eReader Your feedback is welcome! Please contact us by e-mail.

  12. Predictor of regulation of uranium dioxide powder pressing process

    International Nuclear Information System (INIS)

    Motta, Eduardo Souza; Araujo, Victor Hugo Leal de; Bernardelli, Sergio Henrique

    2007-01-01

    One of the most important steps of the uranium dioxide pellets fabrication used in the nuclear fuel elements is the green pellets pressing. The target density of the pellets after the sintering process determines the density of the green pellet. To meet the same sintered target density the green density may vary according to the powder characteristics. These variations implies in changing the regulation of the press for different powder's patches. The regulation done empirically imply in productivity loss and necessity of reprocessing the pellets pressed during the press regulation and also depends on the operator experience. At this work, was developed an artificial neural network feed forward back propagation to predict the press regulation, depending on the powder characteristics and the green pellet's target density. The results obtained at INB - Industrias Nucleares do Brasil S. A. during the fabrication of the fifth recharge of Angra II nuclear power plant are presented. (author)

  13. Area Handbook Series: Morocco: A Country Study,

    Science.gov (United States)

    1985-02-01

    women have less use for another language and are said for the most part to remain monolingual . One authority has reported that less than 1 percent of...Berkeley and Los Angeles: University of California Press, 1970. Spencer, William. Historical Dictionary of Morocco. (African Historical Dictionaries ...Middle East and Africa, 5, No. 164 (FBIS-MEA-84-164), August 22, 1984, Q1-Q7. Hodges, Tony. Historical Dictionary of Western Sahara. (African

  14. Area Handbook Series: Burma: A Country Study

    Science.gov (United States)

    1983-03-01

    publishing and cinema , and the hub of economic power. Because the heart of the bureaucracy was there, it was difficult for any part of Burma to be...conspicuous unemploy- ment among able-bodied and well-educated youths, who crowded the urban cinemas . Other impressions suggested that increased urban...Burma: Military Rule and the Poli"c of Stagnation. Ithaca- Cornell University Press, 1977. -. "Burmese and Malaysian Student Politics: A Preliminary

  15. Area Handbook Series: Zaire: A Country Study

    Science.gov (United States)

    1993-12-01

    firm Philip Barrat Kaiser held a management contract until April 1987 when the government decid- ed to merge Sodimiza with G~camines. Sodimiza had...Rome], 31, No. 4, 1961, 344-54. ". "Congo-lUopoldville." Pages 560-96 in James S. Cole- man and Carl Rosberg (eds.), Political Parties and National...Philadelphia: University of Pennsylvania Press, 1991. Scott, James C. The Moral Economy of the Peasant: Rebellion and Sub- sastence in Southeast Asia. New Haven

  16. Summation of series

    CERN Document Server

    Jolley, LB W

    2004-01-01

    Over 1,100 common series, all grouped for easy reference. Arranged by category, these series include arithmetical and geometrical progressions, powers and products of natural numbers, figurate and polygonal numbers, inverse natural numbers, exponential and logarithmic series, binomials, simple inverse products, factorials, trigonometrical and hyperbolic expansions, and additional series. 1961 edition.

  17. How to press-release and take care of expression in articles at press side

    International Nuclear Information System (INIS)

    Hamamoto, Kazuko; Narabayashi, Tadashi; Kobayashi, Masahide; Akizuki, Teruo; Onishi, Hidetoshi

    2008-01-01

    As for the influences of Chuetsu-Oki Earthquake on Kashiwazaki-Kariwa Nuclear Power Station, we can conclude that 'the safety function of the nuclear power station, that is, 'Shutdown', 'Cooling down' and 'Isolating' functioned as per designed even against earthquake beyond assumption, and fundamental nuclear safety could be assured'. Nevertheless, it is said that one of the causes that harmful rumor had spread was due to mass communication media. In the press reports on some nuclear power station when affected by an earthquake and on trouble in the nuclear power station in the future, we will propose that the publication should be really useful for habitants and citizens and be promoted in the positive and expected direction, in order not to make the same mistake as this time. JSME should aim at implement the above-mentioned proposal under cooperation with other academic societies and organizations. (author)

  18. Men exhibit greater fatigue resistance than women in alternated bench press and leg press exercises.

    Science.gov (United States)

    Monteiro, Estêvão R; Steele, James; Novaes, Jefferson S; Brown, Amanda F; Cavanaugh, Mark T; Vingren, Jakob L; Behm, David G

    2017-11-17

    The purpose of this study was to evaluate the influence of sex, exercise order, and rest interval on neuromuscular fatigue resistance for an alternated strength training sequence of bench press (BP) and leg press (LP) exercises. Twelve women and 16 men, both recreationally trained, performed four sessions in a random order: 1) BP followed by LP with three-minutes rest (BP+LP with rest), 2) LP followed by BP with three-minutes rest (LP+BP with rest), 3) BP followed by LP without rest interval (BP+LP no rest), and 4) LP followed by BP without rest interval (LP+BP no rest). Participants performed four sets with 100% of 10RM load to concentric failure with the goal of completing the maximum number of repetitions in both exercises. The fatigue index was analyzed from the first and last sets of each exercise bout. A main effect for sex showed that women exhibited 25.5% (p=0.001) and 24.5% (p=0.001) greater BP and LP fatigue than men respectively when performing 10RM. Men exhibited greater BP (p<0.0001; 34.1%) and LP (p<0.0001; 30.5%) fatigue resistance when a rest period was provided. Men did not show an exercise order effect for BP fatigue and exhibited greater (p=0.0003; 14.5%) LP fatigue resistance when BP was performed first. The present study demonstrated the greater fatigue resistance of men when performing 10RM BP and LP exercises. Since men tend to experience less fatigue with the second exercise in the exercise pairing, women's training programs should be adjusted to ensure they do not parallel men's resistance training programs.

  19. A superconducting solenoid and press for permanent magnet fabrication

    International Nuclear Information System (INIS)

    Mulcahy, T. M.; Hull, J. R.

    2002-01-01

    For the first time, a superconducting solenoid (SCM) was used to increase the remnant magnetization of sintered NdFeB permanent magnets (PMs). In particular, improved magnetic alignment of commercial-grade PM powder was achieved, as it was axial die pressed into 12.7-mm diameter cylindrical compacts in the 76.2-mm warm bore of a 9-T SCM. The press used to compact the powder is unique and was specifically designed for use with the SCM. Although the press was operated in the batch mode for this proof of concept study, its design is intended to enable automated production. In operation, a simple die and punch set made of nonmagnetic materials was filled with powder and loaded into a nonmagnetic press tube. The cantilevered press tube was inserted horizontally, on a carrier manually advanced along a track, into the SCM. The robustness of the mechanical components and the SCM, in its liquid helium dewar, were specifically designed to allow for insertion and extraction of the magnetic powder and compacts, while operating at 9 T. Compaction was achieved by pressing the punches between the closed end of the press tube and the hydraulic cylinder mounted on the opposite end. Improvements up to 10% in magnetization and 20% in energy products of the permanent magnets were obtained, as the alignment fields were increased above the 2-T maximum field of the electromagnets used in industry. Increases in magnetization of 3% are significant in the mature sintered magnet industry

  20. Jatropha press cake as organic fertilizer in lettuce cultivation

    Directory of Open Access Journals (Sweden)

    José R. Mantovani

    Full Text Available ABSTRACT In biodiesel production, vegetable press cake is obtained as waste, and a suitable destination for jatropha press cake would be the use in agriculture as organic fertilizer. This study aimed to evaluate the effect of jatropha press cake on soil fertility attributes and on lettuce production and accumulation of nutrients in the shoots. The experiment was conducted in pots in a greenhouse, in a randomized block design with eight treatments and five replicates. The treatments consisted of doses of jatropha press cake equivalent to 0, 0.5, 1.0, 2.0, 4.0, 8.0, 16.0 and 32.0 t ha-1. Portions of 5.5 dm3 of soil received limestone, phosphate fertilizer and the doses of jatropha press cake, and remained incubated for 30 days. After incubation, soil samples were collected, each pot received one lettuce seedling and the experiment was carried out for 45 days. The organic fertilization with jatropha press cake increased the contents of nutrients in the soil, especially K+, but caused increment in soil acidity and electrical conductivity. The use of jatropha press cake as organic fertilizer decreased lettuce production and accumulation of nutrients in the shoots.

  1. Numerical simulation of mold shape’s influence on NbTi cold-pressing superconducting joint

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Feng, E-mail: zhoufeng@mail.iee.ac.cn; Cheng, Junsheng; Dai, Yinming; Wang, Qiuliang; Yan, Luguang

    2014-03-15

    Highlights: • Four different shape molds’ influence on NbTi cold-pressing joint are analyzed. • Deformation of filaments is the most uniform in the case of radial compression. • The square mold is the optimum one for decreasing joint resistance in practice. - Abstract: The cold-pressing welding methods are employed to fabricate joints between NbTi multi-filamentary conductors, and a series of joints are made with the molds of different shapes for nuclear magnetic resonance (NMR) magnet applications. The Abaqus–Explicit method was used to do a quasi-static analysis of the cold-pressing welding process. In the simulation, we analyzed four molds with different shapes: plate mold, cap mold, square mold, and radial compression. The simulation shows that the deformation of filaments is the most uniform in the case of radial compression and the square mold is the optimum one for decreasing joint resistance.

  2. A fractal model of the Universe

    Science.gov (United States)

    Gottlieb, Ioan

    The book represents a revisioned, extended, completed and translated version of the book "Superposed Universes. A scientific novel and a SF story" (1995). The book contains a hypothesis by the author concerning the complexity of the Nature. An introduction to the theories of numbers, manyfolds and topology is given. The possible connection with the theory of evolution of the Universe is discussed. The book contains also in the last chapter a SF story based on the hypothesis presented. A connection with fractals theory is given. A part of his earlier studies (1955-1956) were subsequently published without citation by Ali Kyrala (Phys. Rev. vol.117, No.5, march 1, 1960). The book contains as an important appendix the early papers (some of which are published in the coauthoprship with his scientific advisors): 1) T.T. Vescan, A. Weiszmann and I.Gottlieb, Contributii la studiul problemelor geometrice ale teoriei relativitatii restranse. Academia R.P.R. Baza Timisoara. Lucrarile consfatuirii de geometrie diferentiala din 9-12 iunie 1955. In this paper the authors show a new method of the calculation of the metrics. 2) Jean Gottlieb, L'hyphotese d'un modele de la structure de la matiere, Revista Matematica y Fisica Teorica, Serie A, Volumen XY, No.1, y.2, 1964 3) I. Gottlieb, Some hypotheses on space, time and gravitation, Studies in Gravitation Theory, CIP Press, Bucharest, 1988, pp.227-234 as well as some recent papers (published in the coauthorship with his disciples): 4)M. Agop, Gottlieb speace-time. A fractal axiomatic model of the Universe. in Particles and Fields, Editors: M.Agop and P.D. Ioannou, Athens University Press, 2005, pp. 59-141 5) I. Gottlieb, M.Agop and V.Enache, Games with Cantor's dust. Chaos, Solitons and Fractals, vol.40 (2009) pp. 940-945 6) I. Gottlieb, My picture over the World, Bull. of the Polytechnic Institute of Iasi. Tom LVI)LX, Fasc. 1, 2010, pp. 1-18. The book contains also a dedication to father Vasile Gottlieb and wife Cleopatra

  3. Mannes of Forging and Perspectives of Knuckle Joint Presses Modernization

    Directory of Open Access Journals (Sweden)

    A. A. Antsifirov

    2014-01-01

    Full Text Available The article raises an issue to enhance technological forging capabilities on the known knuckle joint presses. It provides an illustrated overview of main design types of presses with crank-knuckle, toggle-knuckle, and knuckle joint mechanisms. The article also shows the advantages of the modernization way and improvement just of the active press equipment in terms of quality-to-price ratio, for example, as compared to the similar new foreign press equipment.It gives an overview of features, which provide forging processes owing to kinetic energy accumulated with the moving parts of the known designs of the knuckle joint presses depending on the drive actuating mechanism. Focused attention is drawn to forging on the knuckle joint presses for a time of contact with a work piece to be comparable with the duration of the work piece deformation process on hydraulic forging hammers. This allows us to forge thin-wall products with process automation compared to the forging hammers.Analysis of accumulating processes of kinetic energy by the moving parts of the knuckle joint presses has shown that presses driven by hydraulic cylinders or two screw hydraulic cylinder are the most optimal for technological operations as evidenced by references to domestic and foreign invention certificates and patents. The article presents disadvantages of forging on presses with hydraulic or pneumatic drive. It is a dependence of the deformation force, caused, mainly, by a force of the drive cylinder. The article gives linear movement rate quantities of press moving members depending on the drives of the actuating mechanism. Based on the above analysis of the features to manufacture work pieces on the knuckle joint presses, the article gives the rationale for the relevance of forging in a short period of time, provided that the moving parts of the press accumulate the required kinetic energy. This can be achieved only through modernization and improvement of forging

  4. Press problem related to nuclear energy news reporting

    International Nuclear Information System (INIS)

    Arai, Mitsuo

    2008-01-01

    Since the event of Niigataken Chuetsu-oki Earthquake in 2007 and the subsequent press reports on damage of nuclear power station after it, a stance of media is being questioned. In order to clear this problem, basic organizational structure of the press related to nuclear energy news was analyzed. Local news department, social news department, science news department and economical news department involve in nuclear energy news the accordance with their own situations and concerns. This structure makes problem of nuclear energy news reporting complicated. Changing this system is required but very difficult. It is concluded that the press problem around nuclear energy news is strange. (author)

  5. Correlation and multifractality in climatological time series

    International Nuclear Information System (INIS)

    Pedron, I T

    2010-01-01

    Climate can be described by statistical analysis of mean values of atmospheric variables over a period. It is possible to detect correlations in climatological time series and to classify its behavior. In this work the Hurst exponent, which can characterize correlation and persistence in time series, is obtained by using the Detrended Fluctuation Analysis (DFA) method. Data series of temperature, precipitation, humidity, solar radiation, wind speed, maximum squall, atmospheric pressure and randomic series are studied. Furthermore, the multifractality of such series is analyzed applying the Multifractal Detrended Fluctuation Analysis (MF-DFA) method. The results indicate presence of correlation (persistent character) in all climatological series and multifractality as well. A larger set of data, and longer, could provide better results indicating the universality of the exponents.

  6. Book Review: "Hidden Markov Models for Time Series: An ...

    African Journals Online (AJOL)

    Hidden Markov Models for Time Series: An Introduction using R. by Walter Zucchini and Iain L. MacDonald. Chapman & Hall (CRC Press), 2009. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · http://dx.doi.org/10.4314/saaj.v10i1.61717 · AJOL African Journals Online.

  7. Improving the Quality of Hot Stamping Parts with Innovative Press Technology and Inline Process Control

    Science.gov (United States)

    Vollmer, R.; Palm, C.

    2017-09-01

    The increasing number of hot stamped parts in the automotive industry is challenging different process areas. This paper presents a method how to improve the production rates over the whole life cycle of a hot forming part. In the core element of a hot forming line, the hydraulic press, mainly two processing steps are performed. Forming and quenching of the sheet metal part. In addition to the forming operation, it is inevitable to optimize the quenching condition in the bottom dead centre in order to reach a fully martensitic structure and tight geometrical tolerances of the part. Deviations in the blank thickness, tool wear, polishing of classical tools impair the quenching condition and therefore the part quality over the time. A new press and tool design has been developed to counter this effect by providing homogenous contact pressure over the whole die. Especially with a multi cavity tool, the new method is advantageous. Test series have shown that the new tool and press concept can produce parts with a blank thickness of 1.0 mm within 8.0 s cycle time. The so called PCH flex principle makes it possible to produce such high output rates under reliable conditions.

  8. Concept Design of Movable Beam of Hydraulic Press

    Directory of Open Access Journals (Sweden)

    Li Yancong

    2017-01-01

    Full Text Available The hydraulic press movable beam is one of the key components of the hydraulic press; its design quality impacts the accuracy of the workpiece that the press suppressed. In this paper, first, with maximum deflection and material strength as constraints, mechanical model of the movable beam is established; next, the concept design model of the moveable beam structure is established; the relationship among the force of the side cylinder, the thickness of the inclined plate, outer plate is established also. Taking movable beam of the 100MN type THP10-10000 isothermal forging hydraulic press as an example, the conceptual design result is given. This concept design method mentoned in the paper has general meaning and can apply to other similar product design.

  9. Fabrication and properties of hot pressed bismuth tungstate

    International Nuclear Information System (INIS)

    Streicher, W.L.

    1978-01-01

    Bi 2 WO 6 is a synthetic polar material that is a possible candidate for energy conversion and detection systems. Previous research on this material has been concerned with crystal growth and sintering characteristics of polycrystalline compacts. This study involves itself with the fabrication of polycrystalline compacts by hot pressing techniques. Densities approaching theoretical crystal density were achieved by hot pressing at 850 0 C for one hour with pressures exceeding 35 MPa. Before hot pressing, the sintering range was determined by high temperature dilatometry of unfired Bi 2 WO 6 ceramics. Hot pressed discs were characterized by scanning electron microscopy, differential scanning calorimetry, and x-ray diffraction. Electrical properties were determined by dc resistivity, capacitance, and conductance measurements, ac poling, dc poling, and current-voltage measurements

  10. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    Bola

    2015-05-13

    May 13, 2015 ... Seven different substrates (A to G) were prepared from saw dust, palm press ... can grow in a wide range of soil types with relatively low ..... documented to include; cotton waste, sugar cane ..... Canada wood ash sources. Can.

  11. Poland's Press and Broadcasting Under the Gierek Regime

    Science.gov (United States)

    Shanor, Donald R.

    1974-01-01

    Reports that the Polish press and broadcasting have been carrying more news and less propaganda since the 1970 Baltic upheavel and that the Polish media are generally allowed more freedom than media in other Communist nations. (RB)

  12. Cars & Censorship: How Advertising Pressure Can Corrupt a Free Press.

    Science.gov (United States)

    Collins, Ronald K. L.

    1992-01-01

    Discusses "private censorship" as it relates to car dealers and television advertising. Defines "private censorship" as that which occurs when a broadcaster suppresses or alters a news story that affects commercial clients (advertisers). Makes recommendations for a freer press. (JOW)

  13. Origin (?) of the Universe

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 1; Issue 3. Origin (?) of the Universe The Big Bang. Jayant V Narlikar. Series Article Volume 1 Issue 3 March 1996 pp 6-12. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/001/03/0006-0012 ...

  14. PBL at Aalborg university

    DEFF Research Database (Denmark)

    From the preface: "All the articles in this book have been presented at the International Conference PBL 2006 ABP, that was held in Lima, Peru, July 19th-21th 2006. This conference is part of a series of Pan-American conferences. It is the first time that Aalborg University has participated...

  15. 9. Universality and Incomputability

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 10. Algorithms - Universality and Incomputability. R K Shyamasundar. Series Article ... Author Affiliations. R K Shyamasundar1. Computer Science Group, Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai 400 005, India ...

  16. Modelling of powder die compaction for press cycle optimization

    Directory of Open Access Journals (Sweden)

    Bayle Jean-Philippe

    2016-01-01

    Full Text Available A new electromechanical press for fuel pellet manufacturing was built last year in partnership between CEA-Marcoule and ChampalleAlcen. This press was developed to shape pellets in a hot cell via remote handling. It has been qualified to show its robustness and to optimize the compaction cycle, thus obtaining a better sintered pellet profile and limiting damage. We will show you how 400 annular pellets have been produced with good geometry's parameters, based on press settings management. These results are according to a good phenomenological pressing knowledge with Finite Element Modeling calculation. Therefore, during die pressing, a modification in the punch displacement sequence induces fluctuation in the axial distribution of frictional forces. The green pellet stress and density gradients are based on these frictional forces between powder and tool, and between grains in the powder, influencing the shape of the pellet after sintering. The pellet shape and diameter tolerances must be minimized to avoid the need for grinding operations. To find the best parameters for the press settings, which enable optimization, FEM calculations were used and different compaction models compared to give the best calculation/physical trial comparisons. These simulations were then used to predict the impact of different parameters when there is a change in the type of powder and the pellet size, or when the behavior of the press changes during the compaction time. In 2016, it is planned to set up the press in a glove box for UO2 manufacturing qualification based on our simulation methodology, before actual hot cell trials in the future.

  17. Dynamic Multiaxial Response of a Hot-Pressed Aluminum Nitride

    Science.gov (United States)

    2012-01-05

    Hutchinson, Adv. Appl . Mech. 29 (1992). [34] H. Ming-Yuan, J.W. Hutchinson, Int. J. Solids Struct. 25 (1989) 1053. [35] J. Salem , L. Ghosn, Int. J...Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride by Guangli Hu, C. Q. Chen, K. T. Ramesh, and J. W. McCauley ARL-RP-0487...Laboratory Aberdeen Proving Ground, MD 21005-5066 ARL-RP-0487 June 2014 Dynamic Multiaxial Response of a Hot- Pressed Aluminum Nitride

  18. Speech freedom and press freedom in human security in Rwanda

    OpenAIRE

    Niyonzima, Oswald

    2014-01-01

    Treball Final de Màster Universitari Internacional en Estudis de Pau, Conflictes i Desenvolupament. Codi: SAA074. Curs: 2013/2014 Freedom of speech and press freedom are key foundations of all human rights as stipulated in human rights declaration of 1948. Denying people the right to free speech is keeping them away from what is happening in this world, thus, hindering them from participating in decision making. While speech freedom and press freedom are key tools to measure if a country ...

  19. PRESS: A Novel Framework of Trajectory Compression in Road Networks

    OpenAIRE

    Song, Renchu; Sun, Weiwei; Zheng, Baihua; Zheng, Yu

    2014-01-01

    Location data becomes more and more important. In this paper, we focus on the trajectory data, and propose a new framework, namely PRESS (Paralleled Road-Network-Based Trajectory Compression), to effectively compress trajectory data under road network constraints. Different from existing work, PRESS proposes a novel representation for trajectories to separate the spatial representation of a trajectory from the temporal representation, and proposes a Hybrid Spatial Compression (HSC) algorithm ...

  20. Corporate social responsibility's discourse in lithuanian business press

    OpenAIRE

    Marčenkovas, Marius

    2014-01-01

    The object of this master work is corporate social responsibility's (CSR) discourse. The purpose of this work is to analyze how Lithuanian business press presents CSR topic. The main tasks to reach this purpose are: overview and compare CSR definitions; analyze media impact to CSR; analyze and summarize CSR discourse in Lithuanian business press. Literature analysis, synthesis and comparative methods were used to drawn conclusions. After the literature analysis of such scientists as Ph. Kotle...

  1. Geometric Series via Probability

    Science.gov (United States)

    Tesman, Barry

    2012-01-01

    Infinite series is a challenging topic in the undergraduate mathematics curriculum for many students. In fact, there is a vast literature in mathematics education research on convergence issues. One of the most important types of infinite series is the geometric series. Their beauty lies in the fact that they can be evaluated explicitly and that…

  2. On the series

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... http://www.ias.ac.in/article/fulltext/pmsc/115/04/0371-0381. Keywords. Inverse binomial series; hypergeometric series; polylogarithms; integral representations. Abstract. In this paper we investigate the series ∑ k = 1 ∞ ( 3 k k ) − 1 k − n x k . Obtaining some integral representations of them, we evaluated the ...

  3. Volatile organic compound emissions during hot-pressing of southern pine particleboard : panel size effects and trade-off between press time and temperature

    Science.gov (United States)

    Wenlong Wang; Douglas J. Gardner; Melissa G.D. Baumann

    2002-01-01

    In previous research, it was shown that decreasing either press temperature or press time generally resulted in decreased volatile organic compound (VOC) emissions during the hot-pressing of southern pine particleboard. However, because it is impossible to reduce both pressing time and temperature while maintaining panel physical and mechanical properties, this study...

  4. Comparison of Myoelectric Activity of a Selection of Upper Extremity Muscles while Doing Bench Press in Two Training Methods of TRX and Barbell Bench Press

    Directory of Open Access Journals (Sweden)

    Ahmad Reza Zibaei

    2016-12-01

    Conclusion: Considering these results it can be maintained that TRX bench press resistance training can be an alternative and effective practice for barbell bench press because, given the results, it can be appreciated that TRX bench press, dips low in the trunk, can lead to muscle activity close to the level of muscle activity during the barbell bench press drill.

  5. A comparative study between spiral-filter press and belt press implemented in a cloudy apple juice production process.

    Science.gov (United States)

    De Paepe, Domien; Coudijzer, Katleen; Noten, Bart; Valkenborg, Dirk; Servaes, Kelly; De Loose, Marc; Diels, Ludo; Voorspoels, Stefan; Van Droogenbroeck, Bart

    2015-04-15

    In this study, advantages and disadvantages of the innovative, low-oxygen spiral-filter press system were studied in comparison with the belt press, commonly applied in small and medium size enterprises for the production of cloudy apple juice. On the basis of equivalent throughput, a higher juice yield could be achieved with spiral-filter press. Also a more turbid juice with a higher content of suspended solids could be produced. The avoidance of enzymatic browning during juice extraction led to an attractive yellowish juice with an elevated phenolic content. Moreover, it was found that juice produced with spiral-filter press demonstrates a higher retention of phenolic compounds during the downstream processing steps and storage. The results demonstrates the advantage of the use of a spiral-filter press in comparison with belt press in the production of a high quality cloudy apple juice rich in phenolic compounds, without the use of oxidation inhibiting additives. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Elbow joint fatigue and bench-press training.

    Science.gov (United States)

    Huang, Yen-Po; Chou, You-Li; Chen, Feng-Chun; Wang, Rong-Tyai; Huang, Ming-Jer; Chou, Paul Pei-Hsi

    2014-01-01

    Bench-press exercises are among the most common form of training exercise for the upper extremity because they yield a notable improvement in both muscle strength and muscle endurance. The literature contains various investigations into the effects of different bench-press positions on the degree of muscle activation. However, the effects of fatigue on the muscular performance and kinetics of the elbow joint are not understood fully. To investigate the effects of fatigue on the kinetics and myodynamic performance of the elbow joint in bench-press training. Controlled laboratory study. Motion research laboratory. A total of 18 physically healthy male students (age = 19.6 ± 0.8 years, height = 168.7 ± 5.5 cm, mass = 69.6 ± 8.6 kg) participated in the investigation. All participants were right-hand dominant, and none had a history of upper extremity injuries or disorders. Participants performed bench-press training until fatigued. Maximal possible number of repetitions, cycle time, myodynamic decline rate, elbow-joint force, and elbow-joint moment. We observed a difference in cycle time in the initial (2.1 ± 0.42 seconds) and fatigue (2.58 ± 0.46 seconds) stages of the bench-press exercise (P = .04). As the participants fatigued, we observed an increase in the medial-lateral force (P = .03) and internal-external moment (P ≤ .04) acting on the elbow joint. Moreover, a reduction in the elbow muscle strength was observed in the elbow extension-flexion (P ≤ .003) and forearm supination-pronation (P ≤ .001) conditions. The results suggest that performing bench-press exercises to the point of fatigue increases elbow-joint loading and may further increase the risk of injury. Therefore, when clinicians design bench-press exercise regimens for general athletic training, muscle strengthening, or physical rehabilitation, they should control carefully the maximal number of repetitions.

  7. Movement Features Which Describe the Flat Bench Press

    Directory of Open Access Journals (Sweden)

    Król Henryk

    2017-06-01

    Full Text Available Introduction. In sport technique studies, motion features can be useful as they have a certain defined measure [1]. In this work, we examined the following three features: the structure of the movement (all the characteristics of the movement, the fluency of the movement, and the rhythm of the movement. The aim of the study was to determine the usefulness of the selected movement features in the evaluation of the flat bench press. The protocol of the study included a flat bench press with free weights and a “touch-and-go” technique. Material and methods. The study involved twenty healthy men; however, only two were selected for analysis. The first subject was a 25-year-old powerlifter (body mass = 95 kg; body height = 182 cm; 1-RM in flat bench press = 145 kg. The second one was a 25-year-old bodybuilder (body mass = 77 kg; body height = 175 cm; 1-RM in flat bench press = 100 kg. The subjects performed consecutive sets of a single repetition of flat bench pressing with an increasing load (70, 80, 90, and 100% 1-RM, with the anticipated maximum weight, until the completion of one repetition maximum. Multidimensional movement analysis was made with the measuring system Smart-E (BTS, Italy, which consisted of six infrared cameras (120 Hz and a wireless module to measure muscle bioelectric activity (Pocket EMG. Results. It was demonstrated that the internal structure of the bench press performed by the bodybuilder and the powerlifter was different. As the time-history of barbell kinematics (the acceleration-time curve showed, with increased loading of the barbell, the rhythm of the flat bench press changed, and the fluidity of the movement worsened.

  8. Freedom of the Press In the Scope of Human Rights

    Directory of Open Access Journals (Sweden)

    Sri Ayu Astuti

    2014-01-01

    Full Text Available Freedom of expression and press freedom is the embodiment of the recognition of human rights. Freedom of expression is also the existence of press to disclose the news with honesty and do not get a pressure to deliver the news to the public space, which in news production is known as a work of journalism. Now the  press has gained freedom of expression in the news production process which is guaranteed in the state constitution. Although Article 28 of the Constitution of the Republic of Indonesia 1945 does not point directly at the press, However, Article 28 F emphasis on processing and storage as well as ownership, excavations to information. It also contains provisions on the freedom of expression of others, which should be valued and respected. It shows equality for everyone in his position before the law in accordance with Article 27 1945 Constitution, which emphasizes the recognition of constitutional rights that belong to every person in the state of law in the Republic of Indonesia. Thus the press, which have freedom of expression in the writings of journalistic works are required to be responsible for the published news. So as not to face the legal issues and criminalization, then press should perform tasks and functions to enforce ethics as the precautionary principle when processing the news and broadcast it to the public space, as well as upholding human rights. How To Cite: Astuti, S. (2014. Freedom of the Press In the Scope of Human Rights. Rechtsidee, 1(1, 101-118. doi:http://dx.doi.org/10.21070/jihr.v1i1.96

  9. ASSOCIATIVE EXPERIMENT BY A. NAZAROV AND R. SOKOLOV’S PROCEDURE “SERIES OF THEMATIC ASSOCIATIONS” WITH THE STIMULUS “CONTEMPORARY RUSSIAN CULTURAL ELITE” AMONG STUDENTS OF SIBERIAN FEDEAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Ms. Elena V. Lazutkina

    2016-09-01

    Full Text Available The article deals with the concept of contemporary Russian cultural elite as a phenomenon of public opinion of the students of Siberian Federal University in the frame of A. Nazarov and R. Sokolov’s associative experiment. As a result of our research we collected a hundred and three students’ answers and reduced them to fourteen categories of associates. We developed a diagram of a collective semantic spectrum of thematic associations and a table of eleven major associates and analysed individualities of the answers of students majoring in different subjects. Conclusions can help with the correction of students’ educational process.

  10. Christopher Hasty, Meter as Rhythm [Metro come Ritmo], Oxford University Press, New York & Oxford, 1997.

    Directory of Open Access Journals (Sweden)

    Antonio Cascelli

    2014-10-01

    Full Text Available Quando, nell’undicesimo libro delle Confessioni, S. Agostino si interroga circa la natura del tempo, individua un problema linguistico in senso forte, dove il linguaggio non costituisce una semplice etichetta da attaccare agli eventi ma un modo di entrare in relazione con essi e conoscerli. Quando qualcuno gli domanda cosa sia il tempo, egli non lo sa, cioè non sa come spiegarlo e gli mancano le parole per esprimere qualcosa che, quando nessuno glielo chiede, egli conosce. Come possiamo esprimere il fluire del tempo? Come possiamo dire il tempo e dar voce a una profonda esperienza cognitiva del divenire e della relazione che noi stabiliamo con esso? Queste domande costituiscono le basi del libro di Christopher Hasty. Il suo punto di partenza è la considerazione che, sopprimendo la creatività e la novità dell'effettiva esperienza musicale, l’astrazione dell’analisi tradisce la natura temporale della musica. Al contrario, Hasty vuole prendere in considerazione questa natura temporale e "cercare dei modi di parlare dell’aspetto evanescente della musica, sviluppando concetti che catturino tanto la determinatezza quanto l’indeterminatezza degli eventi al loro passaggio" (p. vii.

  11. (Review of) Reno, William. 2011. Warfare in Independent Africa. Cambridge: Cambridge University Press

    DEFF Research Database (Denmark)

    Hagmann, Tobias

    2013-01-01

    Warfare in Independent Africa is Reno’s bold attempt to analyze the modern history of African insurgencies. The book tackles this task through the prism of five generations of rebel, which left their mark on the continent; anti-colonial rebels, majority rule rebels, reform rebels, warlord rebels ...... and parochial rebels....

  12. A New Deal for Southeastern Archaeology, by Edwin A. Lyon, The University of Alabama Press

    Directory of Open Access Journals (Sweden)

    Gordon R. Willey

    1996-05-01

    Full Text Available In the 1950s, the Era of the Great Depression, archaeology in the United States enjoyed an enormous boost, both in the substance of its findings on the Precolumbian past and in the development of its methods and proce­dures. Edwin A. Lyon has laid out the story of all this in a book that is a major contribution to the history of the archaeological discipline in this country. The context of this story is in the American South, most specifically the Southeastern United States, or the 'Old South', that part of the country that was the heart of the Confederacy; and it is important to remember that the South has had a history significantly separate and distinct from that of the rest of the nation. This separateness, rooted in its plantation economy and the associated institution of slavery, was further fostered by the Civil War and its aftermath of hardships. These hardships lasted until the 1930s and the economic depression when they began to be ameliorated by the Rooseveltian political and socioeconomic measures known collectively as the 'New Deal'. The policies of the New Deal began those transformations which continued through World War II and beyond. Crucial to these transformations were the building of power dams and rural electrification, soil erosion control and agricultural modernization, and a host of public building programs. All of this went forward with Federal Relief employment. Less tangible but nonetheless important benefits were in the cultural sphere: the arts, drama, writing. history - and of particular importance to us here. archaeology.

  13. Smith D., 2000, Moral Geographies. Ethics in a World of Difference, Edinburgh University Press, 244 p.

    OpenAIRE

    Milhaud, Olivier

    2003-01-01

    The deeply geographical nature of moral issues « Our choices are, in effect, guided by a map of moral alternatives, a map of which we are not aware. Through our everyday interactions, we trace the moral geography of our lives » Stephen Birdsall, 1996 “This book explores the interface between geography, ethics, and morality” and David Smith helps us to understand “how geographical context is significant to moral practice, and how ethical deliberation is incomplete without recognition of the ge...

  14. The "Annales" School and Archaeology, edited by J. Bintliff, New York University Press, New York, 1991

    Directory of Open Access Journals (Sweden)

    Lawrence G. Straus

    1992-11-01

    Full Text Available At a superficial level we could argue that application of concepts of the French "Annales"  School of History to archaeology merely amounts to yet another semantic game, new fad, old wine in new skins. Some of the studies of this slim collection do seem a bit contrived, consisting of attempts to fit particular evidence (mainly from classical archaeology into one or more of Braudel's three categories or temporal constructs: evenements, conjunctures  and structures de longue duree. Does archaeology advance in its unending search for some new truth by merely borrowing and applying terms that have common in Continental history for at least a half century?

  15. Book Symposium: Duncan Pritchard, Epistemic Angst (Princeton University Press, 2015, xiii + 236 pages

    Directory of Open Access Journals (Sweden)

    Duncan Pritchard

    Full Text Available ABSTRACT This book symposium features three critical pieces dealing with Duncan Pritchard's book, 'Epistemic Angst'; the symposium also contains Pritchard's replies to his critics.

  16. Theories of the universe from Babylonian myth to modern science

    CERN Document Server

    1965-01-01

    The theoretical physicist shares his latest thoughts on the nature of space and time in this anthology of selections from Princeton University Press. Along with eminent colleagues, Hawking extends theoretical frontiers by speculating on the big questions of modern cosmology.

  17. TA-03-0035 Press Building – D&D

    Energy Technology Data Exchange (ETDEWEB)

    Hasenack, Marvin Leroy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-02

    The Press Building was constructed in 1954 with 15,073 ft2 of floor space. It was built to house a 5000 ton double action Lake Erie hydraulic press and a uranium casting area. Missions included uranium activities associated with the Nuclear Weapons and Rover Rocket programs. At the end of the Rover program, the building continued to support various uranium materials science projects until the building was placed into a cold and dark status in 2013 and then was demolished in 2017. The building interior, the press, and associated systems were radiological contaminated and disposed of as low level waste. The demolition of this building opened up valuable real estate in the TA-3 area for the future construction of an ~11,000 Sq. Ft. Biosafety Level 2 laboratory and office building. This building will support the ongoing Bioscience Division mission at the laboratory.

  18. Natural Hazards and the press in the western Mediterranean region

    Directory of Open Access Journals (Sweden)

    M. Llasat-Botija

    2007-07-01

    Full Text Available This study analyses press articles published between 1982 and 2005 in an attempt to describe the social perception of natural hazards in Catalonia. The articles included in the database have been classified according to different types of risk. In addition, the study examines the evolution of each type of risk in the press coverage during the study period. Finally, the results have been compared to data provided by insurance companies with respect to compensations paid out for damages. Conclusions show that floods are the most important natural hazard in the region, but that the number of headlines for each event is greater in the case of snowfalls and forest fires. Factors such as the season of the year, the proximity of the affected region to the capital, the topical issues at the time, and the presence of other important news must be considered when the impact in the press is analysed.

  19. Asynchronous decision making in a memorized paddle pressing task.

    Science.gov (United States)

    Dankert, James R; Olson, Byron; Si, Jennie

    2008-12-01

    This paper presents a method for asynchronous decision making using recorded neural data in a binary decision task. This is a demonstration of a technique for developing motor cortical neural prosthetics that do not rely on external cued timing information. The system presented in this paper uses support vector machines and leaky integrate-and-fire elements to predict directional paddle presses. In addition to the traditional metrics of accuracy, asynchronous systems must also optimize the time needed to make a decision. The system presented is able to predict paddle presses with a median accuracy of 88% and all decisions are made before the time of the actual paddle press. An alternative bit rate measure of performance is defined to show that the system proposed here is able to perform the task with the same efficiency as the rats.

  20. The regulation of press freedoms (1863-1867

    Directory of Open Access Journals (Sweden)

    Laurence Coudart

    2015-10-01

    Full Text Available The main objective of this essay is to analyze the legislation affecting the press during the French Intervention and the Second Mexican Empire and establish their regulatory effects. These regulations are frequently ignored by the historiography. The article is limited to the origins, innovations, mechanisms and evolution of printing regulations during this period. As a whole, this allows the reader to observe the restrictive conception of press freedom held by the Mexican political class and their willingness, during the second half of the 19th Century, to turn to prohibitive, repressive, authoritarian and centralist legislation. The article also reveals the extent to which Imperial legislation and its logic of censorship were neither unprecedented nor sudden foreign impositions but instead the expressions of a long-lasting desire for government control over the press.

  1. Method for hot pressing irregularly shaped refractory articles

    Science.gov (United States)

    Steinkamp, William E.; Ballard, Ambrose H.

    1982-01-01

    The present invention is directed to a method for hot pressing irregularly haped refractory articles with these articles of varying thickness being provided with high uniform density and dimensional accuracy. Two partially pressed compacts of the refractory material are placed in a die cavity between displaceable die punches having compact-contacting surfaces of the desired article configuration. A floating, rotatable block is disposed between the compacts. The displacement of the die punches towards one another causes the block to rotate about an axis normal to the direction of movement of the die punches to uniformly distribute the pressure loading upon the compacts for maintaining substantially equal volume displacement of the powder material during the hot pressing operation.

  2. Advertising presence on the visual configuration of the digital press

    Directory of Open Access Journals (Sweden)

    Belinda de Frutos Torres

    2016-07-01

    Full Text Available Visual strength is responsible for one of the mayor changes undergone by the digital press with Internet explosion and the increase of the Informational and Communicational Technologies. The present study analyzes the structure the digital press has taken and the role of the digital advertisement in the composition of their textual and iconic elements. The paper quantifies the picture representations volume and compares their presence on the digital natives papers with those coming from the traditional paper support. The results reveal that there is a mayor contribution of adverts on the native on-line press compare to the on-line paper arriving from the traditional media decreasing the information volume. At the same time the visual volume is boosted on the former compare to the digital media with a paper support. Altogether it can be said that visual component prompted the digital papers first page, being this effect enhanced on the native digital papers.

  3. Film Advertising in the Albanian Press before World War II

    Directory of Open Access Journals (Sweden)

    Vjollca Hysi Panajoti

    2015-05-01

    Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

  4. Kochin, Michael S. 2009. Five Chapters on Rhetoric: Character, Action, Things, Nothing and Art (University Park: Pennsylvania State University Press

    Directory of Open Access Journals (Sweden)

    Eithan Orkibi

    2010-04-01

    Full Text Available Deux constatations traversent le nouvel ouvrage de Michael Kochin, et nous invitent à reconsidérer la rhétorique dans la communication persuasive. D’abord, que ce sont les événements concrets et les faits mis à l’épreuve qui ont la plus grande force de conviction ; et ensuite, que le discours a souvent une fonction autre que la persuasion : celle de maintenir les canaux de communication pour sauvegarder les relations et les institutions humaines. Pour l’auteur de cet ouvrage qui porte sur les...

  5. Comparison of concentric and eccentric bench press repetitions to failure.

    Science.gov (United States)

    Kelly, Stephen B; Brown, Lee E; Hooker, Steven P; Swan, Pamela D; Buman, Matthew P; Alvar, Brent A; Black, Laurie E

    2015-04-01

    Eccentric muscle actions (ECC) are characterized by muscle lengthening, despite actin-myosin crossbridge formation. Muscles acting eccentrically are capable of producing higher levels of force compared with muscles acting concentrically. The purpose of this study was to determine whether ECC bench press yields greater strength than concentric (CON) as determined by 1 repetition maximum (1RM). Additionally, a comparison was made examining differences in the number of repetitions to failure at different relative intensities of 1RM. Thirty healthy men (age = 24.63 ± 5.6 years) were tested for 1RM in CON and ECC bench press and the number of repetitions completed at 60, 70, 80, and 90% 1RM. For CON repetitions, the weight was mechanically lowered to the chest, and the participant pressed it up until the elbows were fully extended. The ECC bench press consisted of lowering a barbell from a fully extended elbow position to the chest in a continuous controlled manner for 3 seconds as determined by electronic metronome. Paired t-tests showed that ECC 1RM (115.99 ± 31.08 kg) was significantly (p ≤ 0.05) greater than CON 1RM (93.56 ± 26.56 kg), and the number of repetitions completed at 90% 1RM was significantly (p ≤ 0.05) greater in ECC (7.67 ± 3.24) as compared with CON (4.57 ± 2.21). There were no significant differences in number of completed repetitions during CON and ECC bench press at 60, 70, and 80% 1RM. These data indicate that ECC actions yield increased force capabilities (∼120%) as compared with CON in the bench press and may be less prone to fatigue, especially at higher intensities. These differences suggest a need to develop unique strategies for training eccentrically.

  6. Process design of press hardening with gradient material property influence

    International Nuclear Information System (INIS)

    Neugebauer, R.; Schieck, F.; Rautenstrauch, A.

    2011-01-01

    Press hardening is currently used in the production of automotive structures that require very high strength and controlled deformation during crash tests. Press hardening can achieve significant reductions of sheet thickness at constant strength and is therefore a promising technology for the production of lightweight and energy-efficient automobiles. The manganese-boron steel 22MnB5 have been implemented in sheet press hardening owing to their excellent hot formability, high hardenability, and good temperability even at low cooling rates. However, press-hardened components have shown poor ductility and cracking at relatively small strains. A possible solution to this problem is a selective increase of steel sheet ductility by press hardening process design in areas where the component is required to deform plastically during crash tests. To this end, process designers require information about microstructure and mechanical properties as a function of the wide spectrum of cooling rates and sequences and austenitizing treatment conditions that can be encountered in production environments. In the present work, a Continuous Cooling Transformation (CCT) diagram with corresponding material properties of sheet steel 22MnB5 was determined for a wide spectrum of cooling rates. Heating and cooling programs were conducted in a quenching dilatometer. Motivated by the importance of residual elasticity in crash test performance, this property was measured using a micro-bending test and the results were integrated into the CCT diagrams to complement the hardness testing results. This information is essential for the process design of press hardening of sheet components with gradient material properties.

  7. Factors influencing the creep strength of hot pressed beryllium

    International Nuclear Information System (INIS)

    Webster, D.; Crooks, D.D.

    1975-01-01

    The parameters controlling the creep strength of hot pressed beryllium block have been determined. Creep strength was improved by a high initial dislocation density, a coarse grain size, and a low impurity content. The impurities most detrimental to creep strength were found to be aluminum, magnesium, and silicon. A uniform distribution of BeO was found to give creep strength which was inferior to a grain boundary distribution. The creep strength of very high purity, hot isostatically pressed beryllium was found to compare favorably with that of other more commonly used high temperature metals

  8. Vacuum hot pressing of titanium-alloy powders

    International Nuclear Information System (INIS)

    Malik, R.K.

    1975-01-01

    Full or nearly full dense products of wrought-metal properties have been obtained by vacuum hot pressing (VHP) of several prealloyed Ti--6Al--4V powders including hydride, hydride/dehydride, and rotating electrode process (REP) spherical powder. The properties of billets VHP from Ti--6Al--4V hydride powder and from hydride/dehydride powders have been shown to be equivalent. The REP spherical powder billets processed by VHP or by hot isostatic pressing (HIP) resulted in equivalent tensile properties. The potential of VHP for fabrication of near net aircraft parts such as complex fittings and engine disks offers considerable cost savings due to reduced material and machining requirements

  9. Series Transmission Line Transformer

    Science.gov (United States)

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  10. Series expansions without diagrams

    International Nuclear Information System (INIS)

    Bhanot, G.; Creutz, M.; Horvath, I.; Lacki, J.; Weckel, J.

    1994-01-01

    We discuss the use of recursive enumeration schemes to obtain low- and high-temperature series expansions for discrete statistical systems. Using linear combinations of generalized helical lattices, the method is competitive with diagrammatic approaches and is easily generalizable. We illustrate the approach using Ising and Potts models. We present low-temperature series results in up to five dimensions and high-temperature series in three dimensions. The method is general and can be applied to any discrete model

  11. The universe strikes back

    International Nuclear Information System (INIS)

    Steigman, G.

    1983-01-01

    The approach to particle physics via cosmology may meet with an obstacle in a series of cosmological puzzles studied in this paper: the flatness-longevity puzzle, the horizon-homogenity puzzle, and the cosmological constant puzzle. An analysis of the geometry and dynamics of the universe leads to an understanding (but not solution) of the flatness-longevity puzzle: possible universes are distinguished by the value of the dimensionless quantity N, the coordinate density of ER particles, such that the longevity of the universe is fixed by N. Universes where nonrelativistic particles dominate are then studied. An inflationary scenario proposed as a solution to these puzzles is studied, but found to have some difficulties

  12. Influence of the "Slingshot" bench press training aid on bench press kinematics and neuromuscular activity in competitive powerlifters.

    Science.gov (United States)

    Dugdale, James H; Hunter, Angus; Di Virgilio, Thomas; Macgregor, Lewis J; Hamilton, D Lee

    2017-02-13

    This study examined the acute effects of the 'Slingshot' on bench-press performance, prime-mover surface electromyographic (sEMG) amplitude, and barbell velocity during maximal and submaximal bench-pressing in competitive male powerlifters. Fifteen male powerlifters (mean ± SD age: 27.05 ± 5.94 years; mass: 94.15kg; 1RM bench-press: 139.7 ± 16.79kg) participated in the study. Bench-press strength, average barbell velocity, and sEMG amplitude of the prime mover muscles (triceps brachii, pectoralis major and anterior deltoid) were measured during two conditions; 'Raw' (without use of any assistance) and 'Slingshot' [using the 'Slingshot' to perform both the weight achieved during 'Raw' 1RM testing (Raw max/SS), and absolute 1RM using the 'Slingshot' (SS)]. The results showed that the 'Slingshot' significantly increased bench press 1RM performance by a mean ± SD of 20.67kg ± 3.4kg. Barbell velocity and stick point analysis indicate that this improvement is likely driven by an increase in peak and pre-stick barbell velocity as triceps RMS was lower throughout all rep max phases with the 'Slingshot'. The 'Slingshot' also caused reductions in RMS, specifically of the triceps at all rep ranges but barbell velocity was better maintained in the last reps of all sets. These data indicate that the 'Slingshot' specifically de-loaded the triceps muscle throughout all rep ranges and provide assistance to maintaining barbell velocity under fatigue during later repetitions of multiple-repetition sets. The 'Slingshot' training aid could therefore be used in de-load phases of bench press training or as an over-reaching and velocity training aid.

  13. 5. CASE SERIES OF MANIA SECONDARY

    African Journals Online (AJOL)

    Esem

    meeting the criteria for DSM IV- TR is increasing. What is not clear with this increase is whether it is primary mania or secondary mania linked with HIV. METHODS. This study design was a case series in which patients with acute manic episodes were admitted to. Chainama Hills College Hospital and University. Teaching ...

  14. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  15. Lecture notes for Advanced Time Series Analysis

    DEFF Research Database (Denmark)

    Madsen, Henrik; Holst, Jan

    1997-01-01

    A first version of this notes was used at the lectures in Grenoble, and they are now extended and improved (together with Jan Holst), and used in Ph.D. courses on Advanced Time Series Analysis at IMM and at the Department of Mathematical Statistics, University of Lund, 1994, 1997, ...

  16. University Internationalization and University Autonomy

    DEFF Research Database (Denmark)

    Turcan, Romeo V.; Gulieva, Valeria

    2016-01-01

    Turcan and Gulieva deepen our theoretical understanding of the process of university internationalisation by exploring the relationship between university internationalisation and university autonomy. They conjecture that the process of university internationalisation and its sustainability are d......, dissimilar, and sometimes conflicting dimensions of the financial, legal, organisational, staffing, and academic autonomy of the host country, are compromising key aspects of their own autonomy and core mission?......Turcan and Gulieva deepen our theoretical understanding of the process of university internationalisation by exploring the relationship between university internationalisation and university autonomy. They conjecture that the process of university internationalisation and its sustainability...... are determined by the structure and exercise of university autonomy settings at home and in the host countries, and that the process itself cannot be successfully achieved and maintained without changes in the autonomy settings. The key question the authors ask is to what degree universities, in embracing new...

  17. TimesVector: a vectorized clustering approach to the analysis of time series transcriptome data from multiple phenotypes.

    Science.gov (United States)

    Jung, Inuk; Jo, Kyuri; Kang, Hyejin; Ahn, Hongryul; Yu, Youngjae; Kim, Sun

    2017-12-01

    Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  18. Equal channel angular pressing of pure aluminium—an analysis

    Indian Academy of Sciences (India)

    Abstract. Equal channel angular pressing (ECAP) is a novel technique for producing ultra fine grain struc- tures in submicron level by introducing a large amount of shear strain into the materials without changing the billet shape or dimensions. This process is well suited for aluminium alloys and is capable of producing ultra.

  19. EMG analysis and modelling of flat bench press using artificial ...

    African Journals Online (AJOL)

    The objective of this study was to evaluate the contribution of particular muscle groups during the Flat Bench Press (FBP) with different external loads. Additionally, the authors attempted to determine whether regression models or Artificial Neural Networks (ANNs) can predict FBP results more precisely and whether they can ...

  20. Democratic Socialism: Toward a Fifth Theory of the Press.

    Science.gov (United States)

    Picard, Robert G.

    For more than 25 years, the "four theories" paradigm has been dominant in the study of the relationships among the press, society, and the state. Asserting that the major approaches to such study are the libertarian, social responsibility, authoritarian, and Soviet/communist theories, this paradigm fails to account for economic and…

  1. "...Establish the Student Press--And Stifle It!"

    Science.gov (United States)

    McCallie, Franklin

    1990-01-01

    Presents an acceptance speech by Franklin McCallie, principal of Kirkwood High School (Missouri), for the "Administrator of the Year" award presented by the Missouri Interscholastic Press Association and the Missouri Journalism Education Association in April 1989. Discusses journalism's role in achieving the school's chief goals: student growth,…

  2. Picture This: 4-H Press Corps Builds Life Skills

    Science.gov (United States)

    Clary, Christy D.

    2018-01-01

    A picture is worth a thousand words! Extension professionals are often looking for the picture that best captures an event and tells its story. Look beneath the surface, though, and a picture is worth much more. Developing a 4-H press corps results in a collection of useful photos but has the added benefit of providing 4-H members with an…

  3. Water holding capacity and enzymatic modification of pressed potato fibres

    NARCIS (Netherlands)

    Ramasamy, U.

    2014-01-01

    Cell wall polysaccharides (CWPs) contribute to the water holding capacity (WHC) of fibre rich feeds, such as pressed potato fibres (PPF). However, the role of CWPs on the WHC of PPF was unidentified so far.

    PPF was characterized to be abundant in arabinogalactan (AG) linked

  4. Quid pro quo: tobacco companies and the black press.

    Science.gov (United States)

    McCandless, Phyra M; Yerger, Valerie B; Malone, Ruth E

    2012-04-01

    We explored the relationship between tobacco companies and the Black press, which plays an important role in conveying information and opinions to Black communities. In this archival case study, we analyzed data from internal tobacco industry documents and archives of the National Newspaper Publishers Association (NNPA), the trade association of the Black press. In exchange for advertising dollars and other support, the tobacco industry expected and received support from Black newspapers for tobacco industry policy positions. Beginning in the 1990s, resistance from within the Black community and reduced advertising budgets created counterpressures. The tobacco industry, however, continued to sustain NNPA support. The quid pro quo between tobacco companies and the Black press violated journalistic standards and represented an unequal trade. Although numerous factors explain today's tobacco-related health disparities, the Black press's service to tobacco companies is problematic because of the trust that the community placed in such media. Understanding the relationship between the tobacco industry and the NNPA provides insight into strategies that the tobacco industry may use in other communities and countries.

  5. The nuclear issue in the cuban press. Challenges and realities

    International Nuclear Information System (INIS)

    Contreras Izquierdo, Marta; Rodriguez Guerra, Ingrids; Gonzalez Montoto, Iosbel; Fernandez Rondon, Manuel

    2005-01-01

    The work presents an analysis of the impact of nuclear issue on the Cuban press from 1990 to 2005 that was carried out by a group of communications specialists from nuclear area. An analysis of main challenges and actions of this group, aimed at informing the public the present situation of the Cuban nuclear programme and its perspectives, was also included

  6. Finishing procedures action on mechanical characteristics of pressed ceramics

    Directory of Open Access Journals (Sweden)

    Mohamed Abdel Moniem Ahmed

    2018-06-01

    Conclusions& significance: Grinding & finishing procedures of pressed ceramics showed significant effect Of drill speed and polishing technique over flexural strength, As Grinding with no finishing and polishing procedure showed lowest flexural Strength values followed by finishing and polishing procedure followed by finishing and polishing with polishing paste procedure.

  7. Process considerations for hot pressing ceramic nuclear waste forms

    International Nuclear Information System (INIS)

    Wilson, C.N.; Brite, D.W.

    1981-01-01

    Spray calcined simulated ceramic nuclear waste powders were hot pressed in graphite, nickel-lined graphite and ZrO 2 -lined Al 2 O 3 dies. Densification, initial off-gas, waste element retention and pellet-die interactions were evaluated. Indicated process considerations and limitations are discussed. 15 figures

  8. Press Ideology and Organizational Control in Hong Kong.

    Science.gov (United States)

    Chan, Joseph Man; Lee, Chin-Chuan

    1988-01-01

    Surveys the entire Chinese journalist population of Hong Kong to determine how news organizations in the highly politicized environment of Hong Kong exercise institutional control on recruitment and newswork. Finds that press ideology is a major determinant of its organizational control. (MS)

  9. Nanoindentation hardness of hot-pressed boron suboxide

    International Nuclear Information System (INIS)

    Machaka, Ronald; Derry, Trevor E.; Sigalas, Iakovos

    2011-01-01

    Highlights: → The load-displacement indentation response of hot-pressed B 6 O is measured and analysed. → The nanoindentation hardness of hot-pressed boron suboxide is reported. → An approach is developed to simulate multi-cycling loading load-displacement curves. → A comprehensive model inter-comparison study of the ISE in hot-pressed B 6 O is also presented. → The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  10. Press travel to the Mochovce power plant in Slovakia

    International Nuclear Information System (INIS)

    1998-07-01

    This press dossier gives, first, a general presentation of the Mochovce power plant of the republic of Slovakia (history, technical characteristics, safety aspects, technical particularities of VVER 440/213 reactors (safety analysis, recent improvements), financing of the modernization project). Then, the activities of the Framatome group in central and eastern Europe are presented (partnerships, cooperation agreements and contracts). (J.S.)

  11. Constitutional Provisions on the Press: A World View.

    Science.gov (United States)

    Paraschos, Manny

    A study examined the legal treatment of the press in constitutions or other basic legal institutional documents from around the world. Sixty-three constitutions or basic documents from the Western World, the Communist Bloc, the Middle East, Africa, Southeast Asia, and Latin America were analyzed. Analysis revealed that most constitutions open with…

  12. A virtual model of the bench press exercise.

    Science.gov (United States)

    Rahmani, Abderrahmane; Rambaud, Olivier; Bourdin, Muriel; Mariot, Jean-Pierre

    2009-08-07

    The objective of this study was to design and validate a three degrees of freedom model in the sagittal plane for the bench press exercise. The mechanical model was based on rigid segments connected by revolute and prismatic pairs, which enabled a kinematic approach and global force estimation. The method requires only three simple measurements: (i) horizontal position of the hand (x(0)); (ii) vertical displacement of the barbell (Z) and (iii) elbow angle (theta). Eight adult male throwers performed maximal concentric bench press exercises against different masses. The kinematic results showed that the vertical displacement of each segment and the global centre of mass followed the vertical displacement of the lifted mass. Consequently, the vertical velocity and acceleration of the combined centre of mass and the lifted mass were identical. Finally, for each lifted mass, there were no practical differences between forces calculated from the bench press model and those simultaneously measured with a force platform. The error was lower than 2.5%. The validity of the mechanical method was also highlighted by a standard error of the estimate (SEE) ranging from 2.0 to 6.6N in absolute terms, a coefficient of variation (CV) or =0.99 for all the lifts (pbench press exercises in both field and laboratory conditions.

  13. The Surrender of Tobruk in 1942: Press reports and soldiers ...

    African Journals Online (AJOL)

    The British and South African papers began to demand answers from politicians and military leaders for this shocking and unexpected catastrophe. The press ... Keywords: Prisoners of war (POWs), World War II, Union Defence Force, Erwin Rommel, Auchinleck, Ritchie, HB Klopper, South Africa, Eighth Army, Gazala ...

  14. Toward a Normative Theory of Freedom of the Press.

    Science.gov (United States)

    Jensen, Dwight Wm.

    In considering the possibility of a normative theory of freedom of the press, this paper examines arguments about such freedom in the Third World and elsewhere. Some of the arguments discussed in the paper are derived from the theories of John Locke and Karl Marx; others are drawn from the concepts of divine rights, elitism, liberal democracy, and…

  15. Back-pressure Forging Using a Servo Press

    OpenAIRE

    河本, 基一郎; Kawamoto, Kiichiro

    2015-01-01

    博士論文要旨Abstract 以下に掲載:International Journal of Automation Technology 9(2) pp.184-192 2015. Fuji Technology Press Ltd. 共著者:Kiichiro Kawamoto, Takeshi Yoneyama, Masato Okada

  16. Nanoindentation hardness of hot-pressed boron suboxide

    Energy Technology Data Exchange (ETDEWEB)

    Machaka, Ronald, E-mail: Ronald.Machaka@wits.ac.za [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Derry, Trevor E. [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Physics, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa); Sigalas, Iakovos [DST/NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P. Bag 3, Wits, Johannesburg (South Africa); School of Chemical and Metallurgical Engineering, University of the Witwatersrand, P.O. Bag 3, Wits, Johannesburg 2050 (South Africa)

    2011-07-15

    Highlights: {yields} The load-displacement indentation response of hot-pressed B{sub 6}O is measured and analysed. {yields} The nanoindentation hardness of hot-pressed boron suboxide is reported. {yields} An approach is developed to simulate multi-cycling loading load-displacement curves. {yields} A comprehensive model inter-comparison study of the ISE in hot-pressed B{sub 6}O is also presented. {yields} The fractal dimension is a better measure of ISE than the Meyer's index. - Abstract: The existence of the indentation size effect implies the absence of a single hardness value for the material under investigation especially at low applied loads. In this paper we present an investigation of the indentation size dependence behaviour of nanoindentation hardness in boron suboxide ceramic compacts prepared by uniaxial hot-pressing. Berkovich nanohardness indentations were conducted and analyzed accordingly. In addition to the ordinary Oliver and Pharr method of nanoindentation data analysis, a quantitative approach for the loading curve analysis is proposed. Using the proposed approach, the description and characterization of the observed indentation size effect through the application of the Meyer's law, and the classical and the modified proportional specimen resistance models as well as the multi-fractal scaling law was conducted and is reported. The load-independent hardness values deduced from our quantitative approach are comparable to the results calculated with conventional methods, especially with the multi-fractal scaling law.

  17. Press-fit bipolar radial head arthroplasty, midterm results

    NARCIS (Netherlands)

    Kodde, Izaäk F.; Heijink, Andras; Kaas, Laurens; Mulder, Paul G. H.; van Dijk, C. Niek; Eygendaal, Denise

    2016-01-01

    Theoretical advantages of bipolar compared with monopolar radial head arthroplasty include better accommodation of radiocapitellar malalignment, reduction of capitellar abrasion, and reduction of stress at the bone-implant interfaces. Our purpose was to report the midterm results of press-fit

  18. Book Review: Stars (Copyright 1985, Golden Press; New York)

    Science.gov (United States)

    Marigza, R. N., Jr.

    2009-06-01

    Stars is a part of the Golden Guides collection produced by Golden Press. It is a small 160 page paperback guide to the constellations, the sun, the moon, planets, and other celestial bodies. The book is convenient to carry along wherever you go, making it an easy to access reference material.

  19. Ethics and the Press: Readings in Mass Media Morality.

    Science.gov (United States)

    Merrill, John C., Ed.; Barney, Ralph D., Ed.

    This collection of 35 articles addresses the topic of the ethical considerations and implications involved in reporting the news. Included in this book are such articles as: "Ethics and Journalism" by John Merrill, "Quality in Mass Communications" by Wilbur Schramm, "The American Press: Some Truths About Truths" by…

  20. MICROSTRUCTURAL ANALYSIS OF HOT ISOSTATICALLY PRESSED AL-SIC

    NARCIS (Netherlands)

    Bronsveld, P.M.; Hosson, J.Th. De; Sargent, M.A.; Alsem, W.H.M.

    1991-01-01

    The difference between extruded and hot isostatically pressed (HIP) Al6061 both with a T6 final heat treatment and with a 30 wt.% SiC particulate reinforcement is one of densification. The higher density of the HIP material is not translated into a stronger material. The Mg2Si precipitation is

  1. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Clara Staples

    2016-06-01

    Full Text Available This paper will firstly examine the international framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the international human rights law framework. Thirdly it will consider the impact of Indonesia’s constitutional law and criminal and civil law, including sedition and defamation laws, and finally media ownership, on the interpretation and scope of the right to freedom of speech in the press. Consideration of these laws will be integrated with a discussion of judicial processes. This discussion will be used to determine how and in what circumstances the constitutional right to freedom of speech in the press may be facilitated or enabled, or on the other hand, limited, overridden or curtailed in Indonesia. Conclusions will then be drawn regarding the strengths and weaknesses of Indonesian laws in safeguarding the right to freedom of speech in the press and the democratic implications from an international human rights perspective. This inquiry will be restricted to Indonesian laws in existence during the post-New Order period of 1998 to the present, and to the information and analysis provided by English-language sources.

  2. The Press of the Soviet Union: A Bibliography.

    Science.gov (United States)

    Bergethon, Bruce; And Others

    Compiled in response to the need for more information on the differences between the press systems of the United States and the Soviet Union, this bibliography contains 240 entries. Consisting of newspaper articles, journal articles, books, and pamphlets, the bibliography provides an overview of the different journalistic philosophies of the two…

  3. Student Press and Distribution Issues: Rights and Responsibilities.

    Science.gov (United States)

    Bartlett, Larry D.

    1984-01-01

    This review analyzes case law in the area of student press and distribution and offers some guidelines for developing and implementing school policy and rules. Litigation is reviewed in order to clarify students' rights, limitations on administrative authority in matters of censorship and prior restraint, and actions in connection with writing and…

  4. Performing “responsibility” and “conspiracy” through press ...

    African Journals Online (AJOL)

    In 2003, the Australian cricketer Shane Warne was suspected and convicted of doping. The purpose of this article was to understand how he tried to resolve the problem/dilemma of being suspected and convicted of doping through three press statements, which he delivered to the media during the 2003 Cricket World Cup ...

  5. Pleurotus pulmonarius cultivation on amended palm press fibre waste

    African Journals Online (AJOL)

    In the last few decades, rapid global demand for edible oils has resulted in a significant increase in the land area of oil crop cultivation. In the process of extraction of palm oil from oil palm fruit, biomass materials such as palm pressed fibre (PPF) are generated as waste products. This research was undertaken to evaluate ...

  6. The Press, the Government, and the Ethics Vacuum.

    Science.gov (United States)

    Merrill, John C.

    Immanuel Kant's idea of a will to do the right thing--to be ethical--is essentially a dead concept with both press and government. The reasons for this "ethics vacuum" are two-fold: the foundations of ethics in both circles are vague, confusing, and beset by relativism and pragmatism so that no system of ethics ever really coalesces; and neither…

  7. Recipes for the Universe

    CERN Multimedia

    2005-01-01

    As part of the World Year of Physics, the Physics Section of the University of Geneva is organising a series of conferences for the uninitiated. Each of the conferences will begin with a demonstration in the auditorium of the detection of cosmic rays and, in collaboration with Professor E. Ellberger of the Conservatoire de Musique de Genève, of how these signals from the farthest reaches of the Universe can be used to create "cosmic music". The third conference in the series, "How to build a universe?", will take place on Tuesday 15 March 2005 and the speaker will be the CERN theoretical physicist, John Ellis. A tiny number of elementary particles are responsible for the very diverse universe that surrounds us. These basic building blocks of matter interact by exchanging photons and other similar particles. After summing up what we know about these fundamental building blocks, their role in the history of the universe will be discussed. Where does matter come from? Where do the structures that ...

  8. New Insight into Sugarcane Industry Waste Utilization (Press Mud) for Cleaner Biobutanol Production by Using C. acetobutylicum NRRL B-527.

    Science.gov (United States)

    Nimbalkar, Pranhita R; Khedkar, Manisha A; Gaikwad, Shashank G; Chavan, Prakash V; Bankar, Sandip B

    2017-11-01

    In the present study, press mud, a sugar industry waste, was explored for biobutanol production to strengthen agricultural economy. The fermentative production of biobutanol was investigated via series of steps, viz. characterization, drying, acid hydrolysis, detoxification, and fermentation. Press mud contains an adequate amount of cellulose (22.3%) and hemicellulose (21.67%) on dry basis, and hence, it can be utilized for further acetone-butanol-ethanol (ABE) production. Drying experiments were conducted in the temperature range of 60-120 °C to circumvent microbial spoilage and enhance storability of press mud. Furthermore, acidic pretreatment variables, viz. sulfuric acid concentration, solid to liquid ratio, and time, were optimized using response surface methodology. The corresponding values were found to be 1.5% (v/v), 1:5 g/mL, and 15 min, respectively. In addition, detoxification studies were also conducted using activated charcoal, which removed almost 93-97% phenolics and around 98% furans, which are toxic to microorganisms during fermentation. Finally, the batch fermentation of detoxified press mud slurry (the sample dried at 100 °C and pretreated) using Clostridium acetobutylicum NRRL B-527 resulted in a higher butanol production of 4.43 g/L with a total ABE of 6.69 g/L.

  9. Fourier Series Optimization Opportunity

    Science.gov (United States)

    Winkel, Brian

    2008-01-01

    This note discusses the introduction of Fourier series as an immediate application of optimization of a function of more than one variable. Specifically, it is shown how the study of Fourier series can be motivated to enrich a multivariable calculus class. This is done through discovery learning and use of technology wherein students build the…

  10. Visualizing the Geometric Series.

    Science.gov (United States)

    Bennett, Albert B., Jr.

    1989-01-01

    Mathematical proofs often leave students unconvinced or without understanding of what has been proved, because they provide no visual-geometric representation. Presented are geometric models for the finite geometric series when r is a whole number, and the infinite geometric series when r is the reciprocal of a whole number. (MNS)

  11. Upper Gastrointestinal (GI) Series

    Science.gov (United States)

    ... standard barium upper GI series, which uses only barium a double-contrast upper GI series, which uses both air and ... evenly coat your upper GI tract with the barium. If you are having a double-contrast study, you will swallow gas-forming crystals that ...

  12. SERI Wind Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Noun, R. J.

    1983-06-01

    The SERI Wind Energy Program manages the areas or innovative research, wind systems analysis, and environmental compatibility for the U.S. Department of Energy. Since 1978, SERI wind program staff have conducted in-house aerodynamic and engineering analyses of novel concepts for wind energy conversion and have managed over 20 subcontracts to determine technical feasibility; the most promising of these concepts is the passive blade cyclic pitch control project. In the area of systems analysis, the SERI program has analyzed the impact of intermittent generation on the reliability of electric utility systems using standard utility planning models. SERI has also conducted methodology assessments. Environmental issues related to television interference and acoustic noise from large wind turbines have been addressed. SERI has identified the causes, effects, and potential control of acoustic noise emissions from large wind turbines.

  13. Short-term outcomes after EX-PRESS implantation versus trabeculectomy alone in patients with neovascular glaucoma

    Directory of Open Access Journals (Sweden)

    Shinohara Y

    2017-12-01

    Full Text Available Yoichiro Shinohara, Hideo Akiyama, Mikiya Magori, Shoji Kishi Department of Ophthalmology, Gunma University Graduate School of Medicine, Maebashi, Gunma, Japan Background: The purpose of this study was to investigate postoperative clinical outcomes in patients with neovascular glaucoma (NVG who underwent trabeculectomy or EX-PRESS implantation and to identify predictors of successful EX-PRESS implantation. Methods: The study designed as a retrospective observational analysis and was set in a single tertiary center. Eighty-nine patients (89 eyes with NVG, were treated using trabeculectomy alone (Trab group; n=39 or EX-PRESS implantation (EX group; n=50. All patients with a history of glaucoma surgery were excluded. The main outcome measures were postoperative intraocular pressure (IOP, visual acuity (VA, number of medications, complications, additional therapy, and success rate. Results: The mean follow-up duration was 4.6 months in the Trab group and 4.2 months in the EX group. There was no significant difference in IOP between the groups except at 1-month follow-up (P=0.045. The number of patients with early postoperative hypotony, a shallow anterior chamber, hyphema, or anterior chamber irrigation was significantly lower in the EX group than in the Trab group (P=0.016, 0.008, 0.019, and 0.014, respectively. The other outcomes, ie, VA, number of medications, and success rate, were similar between the two groups. In the EX group, the success rate was significantly lower in 15 patients with a history of vitrectomy compared to that in 35 patients without a history of vitrectomy (P=0.047. Conclusion: Implantation of an EX-PRESS device may be more effective and safer than trabeculectomy alone in patients with NVG. However, a history of vitrectomy may affect the surgical success rate when using EX-PRESS. Keywords: trabeculectomy, EX-PRESS, neovascular glaucoma, surgery, tube shunt

  14. A "tale of two countries": Narratives of hearts, patients and doctors in the Spanish press.

    Science.gov (United States)

    Danet, Alina; Medina-Doménech, Rosa M

    2015-08-01

    In this article we explore how the Spanish written press--ABC, La Vanguardia, and Blanco y Negro--and the official newsreel No-Do, created and disseminated a narrative about heart transplantations at the end of the 1960s. We consider how Franco's regime used Christiaan Barnard's heart transplants to legitimize the Spanish dictatorship and as a means of signifying scientific progress, modernization and national pride. The Spanish press created the plot of the first transplantations like that of a television series, presenting daily installments on the patients' progress, dramatizing the stories and ensuring the public's emotional attachment. The three main characters in the story: donors, patients and surgeons, formed a symbolic, indivisible narrative triangle endowed with singular meaning. This Spanish narrative of organ transplant technology was deployed through what we have called "a tale of two countries", that, emulating the South African's success, constructed in Martínez-Bordiú, Franco's son-in-law, a home-grown, masculine scientific personality capable of performing heart surgery and endorsing Franco's investment in scientific modernization. © The Author(s) 2013.

  15. Mood and the Market: Can Press Reports of Investors' Mood Predict Stock Prices?

    Science.gov (United States)

    Scherbaum, Charles A.; Kammeyer-Mueller, John D.

    2013-01-01

    We examined whether press reports on the collective mood of investors can predict changes in stock prices. We collected data on the use of emotion words in newspaper reports on traders' affect, coded these emotion words according to their location on an affective circumplex in terms of pleasantness and activation level, and created indices of collective mood for each trading day. Then, by using time series analyses, we examined whether these mood indices, depicting investors' emotion on a given trading day, could predict the next day's opening price of the stock market. The strongest findings showed that activated pleasant mood predicted increases in NASDAQ prices, while activated unpleasant mood predicted decreases in NASDAQ prices. We conclude that both valence and activation levels of collective mood are important in predicting trend continuation in stock prices. PMID:24015202

  16. Mood and the market: can press reports of investors' mood predict stock prices?

    Science.gov (United States)

    Cohen-Charash, Yochi; Scherbaum, Charles A; Kammeyer-Mueller, John D; Staw, Barry M

    2013-01-01

    We examined whether press reports on the collective mood of investors can predict changes in stock prices. We collected data on the use of emotion words in newspaper reports on traders' affect, coded these emotion words according to their location on an affective circumplex in terms of pleasantness and activation level, and created indices of collective mood for each trading day. Then, by using time series analyses, we examined whether these mood indices, depicting investors' emotion on a given trading day, could predict the next day's opening price of the stock market. The strongest findings showed that activated pleasant mood predicted increases in NASDAQ prices, while activated unpleasant mood predicted decreases in NASDAQ prices. We conclude that both valence and activation levels of collective mood are important in predicting trend continuation in stock prices.

  17. Participation spaces for the construction of collective memory in the Spanish digital press

    Directory of Open Access Journals (Sweden)

    Pedro MOLINA RODRÍGUEZ-NAVAS

    2014-10-01

    Full Text Available The Spanish press has published digital spaces dedicated to the recovery of democratic historical memory or personal memory citizenship in general. To do has requested the participation of users. Mostly, the contributions have included personal photographic materials with or without descriptive accounts but in other cases the forms of intervention have been different.In this paper we analyze the main areas of this type that have been published in recent years. We study your objectives and forms of participation required and the final documents. The analysis results allow us to see what formulas have been successful and what elements are involved to get it.Finally, the conclusions we make a series of recommendations regarding the patterns of participation and the construction of spaces that truly allow us to relate personal stories with the general history, thus making contributions to the collective memory from new knowledge paradigms chords with the network society and social diversity.

  18. Transformation of Cs-IONSIV® into a ceramic wasteform by hot isostatic pressing

    Science.gov (United States)

    Chen, Tzu-Yu; Maddrell, Ewan R.; Hyatt, Neil C.; Gandy, Amy S.; Stennett, Martin C.; Hriljac, Joseph A.

    2018-01-01

    A simple method to directly convert Cs-exchanged IONSIV® IE-911 into a ceramic wasteform by hot isostatic pressing (1100 °C/190 MPa/2 hr) is presented. Two major Cs-containing phases, Cs2TiNb6O18 and Cs2ZrSi6O15, and a series of mixed oxides form. The microstructure and phase assemblage of the samples as a function of Cs content were examined using XRD, XRF, SEM and TEM/EDX. The chemical aqueous durability of the materials was investigated using the MCC-1 and PCT-B standard test methods. For HIPed Cs-IONSIV® samples, the MCC-1 normalised release rates of Cs were low rates are indicative of a safe long-term immobilisation matrix for Cs formed directly from spent IONSIV®. It was also demonstrated that the phase formation can be altered by adding Ti metal due to a controlled redox environment.

  19. Finite element modelling and associated experimentations to optimize and predict the pressing cycle of a future AMBB manufacturing press

    International Nuclear Information System (INIS)

    Bayle, J.P.; Mezeix, P.; Tronche, E.; Delette, G.; Remy, E.; Picart, S.

    2014-01-01

    This study presents an approach based on the use of pellet forming numerical digital simulation which enables optimization of the die pressing cycle. Semi-empirical mechanical models were used in an FEM code, CAST3M. Specific powder characterizations were also performed to supply the mechanical parameters of compaction model. The methodology for the identification of five main coefficients (index flow, elastic and plastic parameters) was used with two different powders. The results show that the axial distribution of frictional forces may be changed during die pressing by a modification of the sequence of punch displacements. According to these results and the literature, the pressing cycle can be considered to have an influence on the shape of a sintered pellet through the axial distribution of green density. The process used for the identification of the Cam-Clay model coefficients seems to be in good agreement, even if the changes in certain parameters remain rather unclear and will require follow-up studies to confirm some of the results. The experimental device used produces good quality pellets, and the Radial Open Die Modulus remains the first choice for reduced pellet damage. Much work still remains to be done to fully define the identification process and create the most representative simulations possible before launching an industrial version of a nuclearized press, planned for the last quarter of year 2014. (authors)

  20. Divergent Perturbation Series

    International Nuclear Information System (INIS)

    Suslov, I.M.

    2005-01-01

    Various perturbation series are factorially divergent. The behavior of their high-order terms can be determined by Lipatov's method, which involves the use of instanton configurations of appropriate functional integrals. When the Lipatov asymptotic form is known and several lowest order terms of the perturbation series are found by direct calculation of diagrams, one can gain insight into the behavior of the remaining terms of the series, which can be resummed to solve various strong-coupling problems in a certain approximation. This approach is demonstrated by determining the Gell-Mann-Low functions in φ 4 theory, QED, and QCD with arbitrary coupling constants. An overview of the mathematical theory of divergent series is presented, and interpretation of perturbation series is discussed. Explicit derivations of the Lipatov asymptotic form are presented for some basic problems in theoretical physics. A solution is proposed to the problem of renormalon contributions, which hampered progress in this field in the late 1970s. Practical perturbation-series summation schemes are described both for a coupling constant of order unity and in the strong-coupling limit. An interpretation of the Borel integral is given for 'non-Borel-summable' series. Higher order corrections to the Lipatov asymptotic form are discussed

  1. Improving Dryer and Press Efficiencies Through Combustion of Hydrocarbon Emissions

    Energy Technology Data Exchange (ETDEWEB)

    Sujit Banerjee

    2005-10-31

    Emission control devices on dryers and presses have been legislated into the industry, and are now an integral part of the drying system. These devices consume large quantities of natural gas and electricity and down-sizing or eliminating them will provide major energy savings. The principal strategy taken here focuses on developing process changes that should minimize (and in some cases eliminate) the need for controls. A second approach is to develop lower-cost control options. It has been shown in laboratory and full-scale work that Hazardous Air Pollutants (HAPs) emerge mainly at the end of the press cycle for particleboard, and, by extension, to other prod-ucts. Hence, only the air associated with this point of the cycle need be captured and treated. A model for estimating terpene emissions in the various zones of veneer dryers has been developed. This should allow the emissions to be concentrated in some zones and minimized in others, so that some of the air could be directly released without controls. Low-cost catalysts have been developed for controlling HAPs from dryers and presses. Catalysts conventionally used for regenerative catalytic oxidizers can be used at much lower temperatures for treating press emissions. Fluidized wood ash is an especially inexpensive mate-rial for efficiently reducing formaldehyde in dryer emissions. A heat transfer model for estimating pinene emissions from hot-pressing strand for the manufacture of flakeboard has been constructed from first principles and validated. The model shows that most of the emissions originate from the 1-mm layer of wood adjoining the platen surface. Hence, a simple control option is to surface a softwood mat with a layer of hardwood prior to pressing. Fines release a disproportionate large quantity of HAPs, and it has been shown both theo-retically and in full-scale work that particles smaller than 400 µm are principally responsible. Georgia-Pacific is considering green

  2. Resultados de revisão de artroplastia total do joelho com haste não cimentada "Press-fit" Results of revision total knee arthroplasty using press-fit cementless stem

    Directory of Open Access Journals (Sweden)

    Maurício Masasi Iamaguchi

    2013-02-01

    Full Text Available OBJETIVO: Mostrar nossa experiência com haste não-cimentadas press-fit e fixação metafisária com cimento em série selecionada de pacientes que realizaram revisão de artroplastia total do joelho. MÉTODOS: Trinta e quatro pacientes (35 joelhos foram submetidos a revisão de artroplastia total do joelho usando técnica "press-fit". Seguimento mínimo foi de um ano (média de 2,2 anos e máximo de três anos. RESULTADOS: Dos 34 pacientes, 20 foram mulheres e 14 foram homens. Houve um óbito por causa não relacionada a artroplastia e perda de seguimento de um paciente. Não houve nenhum caso em que fosse necessária nova revisão. Os pacientes que foram submetidos à revisão apresentaram melhora clínica e funcional demonstrado pelos resultados do KSS, resultados do questionário de qualidade de vida SF-36, através do ganho de amplitude de movimento e da melhora no alinhamento do membro. CONCLUSÃO: Houve melhora clínica e funcional no pós-operatório em relação ao pré-operatório na revisão de artroplastia total do Joelho com haste não cimentada "press-fit". Nível de Evidência IV, Série de casos.OBJECTIVE: To show our experience with press-fit cementless stem and metaphyseal fixation with cement in a selected series of patients who underwent revision total knee arthroplasty. METHODS: Thirty-four patients (35 knees underwent revision total knee arthroplasty using the press-fit technique. Minimum follow-up was one year (mean 2.2 years with a maximum length of three years. RESULTS: Of 34 patients, 20 were women and 14 were men. There was one death due to causes not related to arthroplasty and one patient dropout. There were no cases in which further review was necessary. Patients who underwent revision had clinical and functional improvement demonstrated by the results of the KSS, results of the SF-36 quality of life questionnaire, through gains in range of motion and improved limb alignment. CONCLUSION: There was postoperative

  3. An Update of Freedom of the Press and Information in Latin America and the Caribbean.

    Science.gov (United States)

    Garrison, Bruce; Munoz, Julio E.

    This paper is based on a review of the literature that included reports from the Inter-American Press Association's general assembly in Los Angeles in October 1984, the mid-year meeting of the Inter-American Press Association in Panama City in March 1985, and the 1983 world press freedom review of the International Press Institute. Other material…

  4. Effects of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses

    Science.gov (United States)

    X.L. Luo; Junyong Zhu; Roland Gleisner; H.Y. Zhan

    2011-01-01

    This article reports the effect of wet-pressing-induced fiber hornification on enzymatic saccharification of lignocelluloses. A wet cellulosic substrate of bleached kraft eucalyptus pulp and two wet sulfite-pretreated lignocellulosic substrates of aspen and lodgepole pine were pressed to various moisture (solids) contents by variation of pressing pressure and pressing...

  5. Bench press and push-up at comparable levels of muscle activity results in similar strength gains.

    Science.gov (United States)

    Calatayud, Joaquin; Borreani, Sebastien; Colado, Juan C; Martin, Fernando; Tella, Victor; Andersen, Lars L

    2015-01-01

    Electromyography (EMG) exercise evaluation is commonly used to measure the intensity of muscle contraction. Although researchers assume that biomechanically comparable resistance exercises with similar high EMG levels will produce similar strength gains over the long term, no studies have actually corroborated this hypothesis. This study evaluated EMG levels during 6 repetition maximum (6RM) bench press and push-up, and subsequently performed a 5-week training period where subjects were randomly divided into 3 groups (i.e., 6RM bench press group, 6RM elastic band push-up group, or control group) to evaluate muscle strength gains. Thirty university students with advanced resistance training experience participated in the 2-part study. During the training period, exercises were performed using the same loads and variables that were used during the EMG data collection. At baseline, EMG amplitude showed no significant difference between 6RM bench press and band push-up. Significant differences among the groups were found for percent change (Δ) between pretest and posttest for 6RM (p = 0.017) and for 1 repetition maximum (1RM) (p bench press group and 6RM elastic band push-up group improved their 1RM and 6RM (Δ ranging from 13.65 to 22.21) tests significantly with similar gains, whereas control group remains unchanged. Thus, when the EMG values are comparable and the same conditions are reproduced, the aforementioned exercises can provide similar muscle strength gains.

  6. Ex-PRESS glaucoma filter: an MRI compatible metallic orbital foreign body imaged at 1.5 and 3T.

    Science.gov (United States)

    Mabray, M C; Uzelac, A; Talbott, J F; Lin, S C; Gean, A D

    2015-05-01

    To report on the MRI compatibility of the Ex-PRESS glaucoma filtration device, a tiny metallic implant placed into the anterior chamber of the eye that is much smaller than traditional glaucoma shunts, and to educate the radiology community regarding its appearance. Seven patients with Ex-PRESS glaucoma filtration devices were identified that had undergone MRI at San Francisco General Hospital/University of California San Francisco Medical Center by searching and cross-referencing the radiology reporting system and the electronic medical record. MRI images were reviewed for artefact interfering with interpretation. Ophthalmology examinations were reviewed for evidence of complications. Eighteen individual MRI examinations were performed during 12 unique MRI events on these 7 patients. 13/18 individual MRI examinations and 7/12 MRI events were performed at 3 T with the others performed at 1.5 T. Mean time from Ex-PRESS implantation to MRI was 17.5 months. Mean time from MRI to first ophthalmology examination was 1.1 months and from MRI to latest ophthalmology examination was 6.6 months. Susceptibility artefact did not interfere with image interpretation and no complications related to MRI were encountered. The Ex-PRESS glaucoma filtration device appears to be safe for MRI at 1.5 and 3 T and does not produce significant susceptibility artefact to affect diagnostic interpretation adversely. Copyright © 2015 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

  7. Hot pressing, strength, and fracture of calcium hexaboride

    International Nuclear Information System (INIS)

    Dutta, S.K.

    1975-01-01

    Fracture behavior and strength of hot-pressed CaB 6 were studied. The modulus of elasticity determined by attaching strain gages to the tensile surface of the bend bars to measure strain, was 55 +- 3 x 10 6 psi. The results are compared with values for other low density ceramic materials (B 4 C, SiB 6 , Be 4 B, AlB 12 ) in a table. The fracture mode was observed for both modulus of rupture and impact test specimens. Predominantly transgranular fracture, associated with distinct step cleavages is evident. Fracture origins were examined in an effort to understand the strength limiting features in hot-pressed CaB 6 specimens. Surface defects, large grain agglomerations, and isolated pore pockets were observed and varied from bar to bar; these were similar to those found in B 4 C. (U.S.)

  8. Pressing Speed, Specific Pressure and Mechanical Properties of Aluminium Cast

    Directory of Open Access Journals (Sweden)

    Gaspar S.

    2016-06-01

    Full Text Available Recent research in the process of aluminum alloy die castings production, which is nowadays deeply implemented into the rapidly growing automobile, shipping and aircraft industries, is aimed at increasing the useful qualitative properties of the die casting in order to obtain its high mechanical properties at acceptable economic cost. Problem of technological factors of high pressure die casting has been a subject of worldwide research (EU, US, Japan, etc.. The final performance properties of die castings are subjected to a large number of technological factors. The main technological factors of high pressure die casting are as follows: plunger pressing speed, specific (increase pressure, mold temperature as well as alloy temperature. The contribution discusses the impact of the plunger pressing speed and specific (increase pressure on the mechanical properties of the casting aluminum alloy.

  9. Research on the Visual Processing System of the Punch Press

    Directory of Open Access Journals (Sweden)

    Sun Xuan

    2016-01-01

    Full Text Available Most of raw materials of small hardware processing for plate scraps, and it’s realized through the manual operation of ordinary punch, which way has the low production efficiency and the high labor intensity. In order to improve the automation level of production, developing and designing of a visual processing system for punch press manipulator which based on the MFC tools of Visual Studio software platform. Through the image acquisition and image processing, get the information about the board to be processed, such as shape, length, the center of gravity position and pose, and providing relevant parameters for positioning gripping and placing into the punch table positioning of the feeding manipulator and automatic programming of punching machine, so as to realize the automatic operation about press feeding and processing.

  10. Social Representations of the Environment in Press Media

    Directory of Open Access Journals (Sweden)

    Gislei Mocelin Polli

    2015-08-01

    Full Text Available Environmental issues are given prominence in the media and scientific circles. From the 60’s until early 2010 there were changes in the way people related to the environment, with a paradigm shift occurring regarding the environment. This study sought to identify the representational content disseminated by the press media on the environment in different periods. A qualitative survey was therefore conducted of documents, and data were obtained through texts published in a magazine with national circulation. The data were analyzed using the ALCESTE program with a Lexicographic Analysis. It was identified that the press media reflects the paradigm shifts, and publications dating from the late 60’s are compatible with the old paradigm, evolving over time, and are now compatible with the new environmental paradigm. The results indicate that currently the environment needs care in all its aspects and lack of care creates global impacts.

  11. News from the Library: newspapers anyone? Try PressDisplay!

    CERN Multimedia

    CERN Library

    2011-01-01

    PressDisplay is an online portal where you can browse and read online articles from more than 1,900 newspapers from 95 countries, as soon as they are published. With Pressdisplay, the time when newspapers were nicely displayed on wooden rods in libraries has passed...   Le Monde, International Herald Tribune and many more titles are displayed in their original layout including text and images, and you can print and e-mail the articles you are interested in. You even have the possibility to create rss feeds, so that the news reaches you directly.   The CERN Library has now activated a trial version of PressDisplay valid till 31 December; it is open to everyone at CERN. This trial doesn't offer the possibility to create personalised alerts based on specific search criteria. In case you need such features - or if you have any comments or questions - please contact us.

  12. Reducing VOC Press Emission from OSB Manufacturing; FINAL

    International Nuclear Information System (INIS)

    Gary D, McGinnis; Laura S, WIlliams; Amy E, Monte; Jagdish Rughani; Brett A, Niemi; Thomas M, Flicker

    2001-01-01

    Current regulations require industry to meet air emission standards with regard to particulates, volatile organic compounds (VOCs), hazardous air pollutants (HAPs) and other gases. One of many industries that will be affected by the new regulations is the wood composites industry. This industry generates VOCs, HAPs, and particulates mainly during the drying and pressing of wood. Current air treatment technologies for the industry are expensive to install and operate. As regulations become more stringent, treatment technologies will need to become more efficient and cost effective. The overall objective of this study is to evaluate the use of process conditions and chemical additives to reduce VOC/HAPs in air emitted from presses and dryers during the production of oriented strand board

  13. Indonesian journalistic competitions: tribute or threat for press practice

    Science.gov (United States)

    Dewi, P. A. R.; Aji, G. G.; Sukardani, P. S.

    2018-01-01

    This research aims to Investigate journalists’ understanding toward glittering generalities practice - positive and good coverage of the caused by the Journalistic contests, the prices are attracting them, Reviews their motives to Participate, and their beliefs about ethics al thing. It is also retrieve how the chief editor, as a decision maker in the mass media taking his responsibility on the glittering news. This research uses a case study method by conducting indepth interviews on journalists, editors, and professional the alliance to collect the data and analyse it based on critical paradigm. The results show that journalist believe that competition is good, and there is no violation as long as the stick to the press code of conduct, but for chief editors and professional alliance, they begin to aware the damage of the contest. The findings of this work will be valuable to develop critical thinking of press workers and promote awareness to the society to control the media practice.

  14. A new cleaner process to prepare pressing-powder

    Directory of Open Access Journals (Sweden)

    Shu, Z.

    2011-10-01

    Full Text Available An alternative cleaner process of pressing-powder preparation, based on filter-pressing and a novel granulation method, is presented to substitute the existing spray-drying process. In the new process, about two-thirds of wet-milled slurry is filterpressed, dried and milled into dry fine powder. The other one-third of the slurry and the as-obtained dry fine powder are spray-mixed in a tower, where the slurry droplets adsorb the dry powder to form granules which are then rolled and dried into a useable pressing-powder for tile pressing. The key stages, filter-pressing and granulation (consisting of spray-mixing and rolling treatment, are specially studied. The pressing-powder properties and pressing/firing behavior, and, energy/water consumption and pollution emission data are presented, and a comparison between the new process and the existing spray-drying process is made. This new process has been found to be feasible and provides a pressing-powder with suitable properties, together with lower energy/water consumption and pollution emission (particulate matter and CO2.

    En ese trabajo se presenta un proceso alternativo y más ecológico para la preparación de polvo de prensas por molienda vía húmeda de las materias primas. En este proceso la eliminación del agua de la suspensión obtenida en la etapa de molienda, en vez de realizarse por secado por atomización, se lleva a cabo en dos etapas, en una primera etapa dos tercios de esta suspensión se filtro-prensan, posteriormente se secan y molturan hasta obtener un polvo seco micronizado. Este material seco se introduce por la parte superior de una torre granuladora, en la que se pulveriza el tercio de la suspensión restante por la parte inferior, de forma que las gotas adsorben sobre su superficie las partículas secas formando gránulos, que posteriormente se compactan por rodamiento (“rolling”, y finalmente se secan hasta la humedad requerida para el prensado. En

  15. Different Visions of Framing Violence in International Press News

    DEFF Research Database (Denmark)

    Ramirez, Jacobo

    in Mexico and to explore entrepreneurs’ reaction to the covered news. We also analyze journalists’ treatment of this news (Semetko & Valkendurg, 2000) and differences among newspapers from the U.S., Mexico and the European Union (EU). A sample of 200 news histories was constructed by integrating...... international and Mexican newspapers from 2006 to 2012. Our results showed that overall, U.S. and EU newspapers present more news related to violence towards entrepreneurs than Mexican outlets, which more often adopt the avoid strategy (Oliver, 1991). The conflict frame was more widely used in EU newspapers...... than in U.S. and Mexican newspapers, and the economic frame was more present in the U.S. and Mexican press than in the EU press. The morality frame was used more frequently by Mexican journalists than U.S. and European journalists. The results made it possible to observe the effects of framing...

  16. Visual impact in the digital press: a Spanish empirical research

    Directory of Open Access Journals (Sweden)

    Joan Francesc Fondevila Gascón

    2010-12-01

    Full Text Available Visual resource (photography and video inclusion in digital journalism is obtaining importance in the multimedia area. The principal resources of digital press are multimedia, hypertext and interactivity. Multimedia is in an initial process of evolution. The objective of this research is to observe empirically the use of visual resources by the digital pure player press. These media try to take advantage of the new multimedia possibilities in the development and presentation of the contents. We have analyzed empirically video and photography inclusion in the multimedia framework (text, photography, video, audio, infograph and animation programs in four digital newspapers (Libertad Digital and El Plural, in Spanish, and Vilaweb.cat and e-Noticies, in Catalan analyzed according to journalistic genres.

  17. Convicted Murderers and the Victorian Press: Condemnation vs. Sympathy

    Directory of Open Access Journals (Sweden)

    Martin J. Wiener

    2007-11-01

    Full Text Available Almost half of those receiving the death sentence in late-Victorian and Edwardian England were reprieved. The process of deciding which murderers were to hang and which were to be spared became an increasingly public one, thanks to the growing intervention of the press. This intervention grew alongside the accelerated expansion in the numbers and circulations of newspapers in the second half of the nineteenth century. As the press became a larger part of national life, its more „popular‟ and its more local segments carved out for themselves a new and ever more prominent role as major participants in public discourse over „justice‟ vs. „mercy‟ for condemned murderers. This involvement is a facet of Victorian and Edwardian newspapers that has previously been overlooked.

  18. University: a Historical-Philosophical Approach

    Directory of Open Access Journals (Sweden)

    Jesús Salvador Moncada

    2008-08-01

    Full Text Available Specialization has led to the breakdown of knowledge with the current university system to blame. This is a pressing issue worldwide. The reasons include social issues, educational models and the complexities of academic life. In contrast, this review explores the model of universities prevalent during medieval times in terms of teaching, research, community service, internationalization and autonomy, all pointing to an educational par excellence.

  19. Analysing Stable Time Series

    National Research Council Canada - National Science Library

    Adler, Robert

    1997-01-01

    We describe how to take a stable, ARMA, time series through the various stages of model identification, parameter estimation, and diagnostic checking, and accompany the discussion with a goodly number...

  20. Multivariate Time Series Search

    Data.gov (United States)

    National Aeronautics and Space Administration — Multivariate Time-Series (MTS) are ubiquitous, and are generated in areas as disparate as sensor recordings in aerospace systems, music and video streams, medical...

  1. Historical Climatology Series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Historical Climatology Series (HCS) is a set of climate-related publications published by NOAA's National Climatic Data Center beginning in 1978. HCS is...

  2. Hot Isostatic Press (HIP) vitrification of radwaste concretes

    International Nuclear Information System (INIS)

    Siemer, D.D.; Scheetz, B.; Gougar, M.L.D.

    1995-01-01

    Properly formulated and properly ''canned'' radwaste concretes can be readily hot-isostatically-pressed (HIPed) into materials that exhibit performance equivalent to typical radwaste-type glasses. The HIPing conditions (temperature/pressure) required to turn a concrete waste form into a ''vitrified'' waste form are quite mild and therefore consistent with both safety and high productivity. This paper describes the process and its products with reference to its potential application to Idaho Chemical Processing Plant (ICPP) reprocessing wastes

  3. Mediated Nationalism: Press Freedom, Mass Media, and Nationalism

    Science.gov (United States)

    2017-12-01

    spread propaganda resulted in a positive response by listeners who were predisposed to anti-Semitism and a negative response by those whose prior...2016/jun/11/ david-cameron-brexit-eu-referendum- listen -jeremy-corbyn. 5 Nations with a censored press would likely have denied the expression of...nationalism. Those “who can understand them, or can acquire such comprehension is included in a moral and economic community.”45 He states that “what is

  4. Biological effects of the ionizing radiation. Press breakfast

    International Nuclear Information System (INIS)

    Flury-Herard, A.; Boiteux, S.; Dutrillaux, B.; Toledano, M.

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  5. FREEDOM OF SPEECH IN INDONESIAN PRESS: INTERNATIONAL HUMAN RIGHTS PERSPECTIVE

    OpenAIRE

    Clara Staples

    2016-01-01

    This paper will firstly examine the International framework of human rights law and its guidelines for safeguarding the right to freedom of speech in the press. Secondly, it will describe the constitutional and other legal rights protecting freedom of speech in Indonesia and assess their compatibility with the right to freedom of speech under the International human rights law framework. Thirdly it will consider the impact of Indonesia's constitutional law and criminal and civil law, includin...

  6. Mechanical and thermophysical properties of hot-pressed SYNROC B

    International Nuclear Information System (INIS)

    Hoenig, C.L.; Newkirk, H.W.; Otto, R.A.; Brady, R.L.; Brown, A.E.; Ulrich, A.R.; Lum, R.C.

    1981-01-01

    The optimal SYNROC compositons for use with commercial waste are reviewed. Large amounts of powder (about 2.5 kg) were prepared by convention al ceramic operations to test the SYNROC concept on a processing scale. Samples, 15.2 cm in diameter, were hot pressed in graphite, and representative samples were cut for microstructural evaluations. Measured mechanical and thermophysical properties did not vary significantly as a function of sample location and were typical of titanate ceramic materials

  7. Film Advertising in the Albanian Press before World War II

    OpenAIRE

    Vjollca Hysi Panajoti; Mirdaim Axhami; Loreta Zela Axhami

    2015-01-01

    This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the ...

  8. Long time series

    DEFF Research Database (Denmark)

    Hisdal, H.; Holmqvist, E.; Hyvärinen, V.

    Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the......Awareness that emission of greenhouse gases will raise the global temperature and change the climate has led to studies trying to identify such changes in long-term climate and hydrologic time series. This report, written by the...

  9. The Social Theories of the press: journalism and society

    Directory of Open Access Journals (Sweden)

    Beatriz Marocco

    2005-06-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  10. The Social Theories of the press: journalism and society

    Directory of Open Access Journals (Sweden)

    Beatriz Marocco

    2011-02-01

    Full Text Available For a short period of time, between the end of the 19th century and the middle of the 20th, newspapers and journalists were under the spotlight as never before. However, the comprehensive reviews of the theories of the press do not acknowledge the thought of this period and its development into “the social theories of the press” (H. Hardt, 1979. This article is positioned in this gap of press studies, and it uses as a starting point the foucaultian description of the diff erent thresholds that establish the levels of discourse elaboration (Foucault, 1995. It aims at exploring the theoretical production that approximates German and American scholars such as Albert Schäffle (1831-1903; Karl Knies (1821-1898; Karl Bücher (1847-1930; Ferdinand Tönnies (1835-1936; Albion Small (1854-1926; Edward Ross (1856-1951; Max Weber (1864-1920; Robert Park (1864-1944 and Walter Lippmann (1889-1974, rescuing this production from the pre-history of the press to materialize evidence that this production coincides, in its external origin, with the modern newspaper practices, although there seemed to be no dependence between them at the time.

  11. Graphite and boron carbide composites made by hot-pressing

    International Nuclear Information System (INIS)

    Miyazaki, K.; Hagio, T.; Kobayashi, K.

    1981-01-01

    Composites consisting of graphite and boron carbide were made by hot-pressing mixed powders of coke carbon and boron carbide. The change of relative density, mechanical strength and electrical resistivity of the composites and the X-ray parameters of coke carbon were investigated with increase of boron carbide content and hot-pressing temperature. From these experiments, it was found that boron carbide powder has a remarkable effect on sintering and graphitization of coke carbon powder above the hot-pressing temperature of 2000 0 C. At 2200 0 C, electrical resistivity of the composite and d(002) spacing of coke carbon once showed minimum values at about 5 to 10 wt% boron carbide and then increased. The strength of the composite increased with increase of boron carbide content. It was considered that some boron from boron carbide began to diffuse substitutionally into the graphite structure above 2000 0 C and densification and graphitization were promoted with the diffusion of boron. Improvements could be made to the mechanical strength, density, oxidation resistance and manufacturing methods by comparing with the properties and processes of conventional graphites. (author)

  12. Production of press moulds by plasma spray forming process

    International Nuclear Information System (INIS)

    Borisov, Y.; Myakota, I.; Polyakov, S.

    2001-01-01

    Plasma spray forming process for production of press moulds which are used for manufacture of articles from plastics was developed. The press moulds were produced by plasma spraying of Cu-Al-Fe-alloy powder on surface of a master model. The master models were made from non-metallic materials with heat resistance below 70 C (wood, gypsum etc). Double cooling system which provides for a control of surface model temperature and quenching conditions of sprayed material was designed. It made possible on the one hand to support model surface temperature below 70 C and on the other hand to provide for temperature conditions of martensite transformation in Cu-Al-system with a fixation of metastable ductile α + β 1 -phase. This allowed to decrease residual stresses in sprayed layer (up to 0,5-2,5 MPa), to increase microhardness of the coating material (up to 1200-1800 MPa) and its ductility (σ B = 70-105 MPa, δ = 6-12 %). This plasma spray forming process makes possible to spray thick layers (5-20 mm and more) without their cracking and deformation. The process is used for a production of press moulds which are applied in shoes industry, for fabrication of toys, souvenirs etc. (author)

  13. Baby universe theory

    International Nuclear Information System (INIS)

    Nielsen, H.B.; Ninomiya, Masao

    1989-12-01

    We give an elementary review of the so called 'the theory of baby universes' which is a series of ideas or speculations about some effects in quantum gravity, viz. the effect of a certain type of wormholes, representing the exchange of small 3-space universes called baby universes. We consider this 'theory' as being physically and scientifically a very promising candidate for a theory of everything. It is, however, mathematically lacking any strong foundation at all. It solves several fine-tuning problems: First of all the cosmological constant problem, and also the strong CP-problem and the hierarchy problem. We also speculate that it might predict the possibility of influencing the probability distributions of the outcome of quantum mechanical measurements at one time by acts at a later time. (orig.)

  14. Alternating series fit to the total cross sections

    International Nuclear Information System (INIS)

    Il'in, Yu.; Lendel, A.

    1993-01-01

    It is show by a simple Regge-type fit suggested recently by Donnachie and Landshoff that the universal pomeron contribution to various total cross sections may be represented by an alternating series a - b log s + c (log s) 2 corresponding to a series of Regge multipoles. (author). 9 refs., 5 tabs., 5 figs

  15. Seminar series on Safety matters

    CERN Multimedia

    HSE

    2010-01-01

    The HSE - Occupational Health & Safety and Environmental Protection - Unit is starting a seminar series on Safety matters. The aim is to invite colleagues from Universities, Industries or Government Agencies to share their experience. The seminars will take place in intervals of several months. Part of the Seminars will be held in the form of a Forum where participants can discuss and share views with persons who manage, teach or research Safety matters elsewhere. You are invited to the first Safety Seminar on 22nd September 2010 at 10h00 in building 40 S2 A1 "Salle Andersson" L’Ecole Polytechnique Fédérale de Lausanne (EPFL) will present the way safety is managed in their research institution. Some aspects of research in physics and chemical laboratories will also be presented. The seminar will be given by Dr Thierry Meyer, Head of OHS at FSB-EPFL and Dr Amela Groso, responsible for the safety of the physics institutes

  16. Research Facility for Mechanical Press Closed Gap Adjuster

    Directory of Open Access Journals (Sweden)

    A. A. Ancifirov

    2016-01-01

    Full Text Available The article describes an example of the research facility for closed gap adjustment mechanism based on the KD2128 closed-die forging press. Its rated force with a servo drive used is 630kN. The servo drive consists of a motor with nominal power of 1.57kW and a frequency converter with power of 7.5kW, which has functions of the programmable logic controller.The article notes that such a facility is expedient and useful for practical classes on forging-andstamping machines at the BMSTU Department of «Technology processing by pressure» to demonstrate the capabilities of existing technological facility, learn a design of forging-andstamping machine units, solve the problems of automatic control, monitoring, and diagnostics in blank manufacturing.The article presents a detailed facility diagram of the closed gap adjustment mechanism and its photograph, describes the mechanism and its basic parameters, gives characteristics of the synchronous motor to drive the mechanism, reviews practical works, which the research facility may provide.Based on the four experiments the article estimates an efficiency of the research facilityuse under consideration, especially when modeling a servo motor shaft under the maximum load. The relevant diagrams confirm experimental results, namely: control current, angle of motor shaft and its speed versus time. Thus, upon the diagram analysis it can be noted that the research facility design allows providing kinematics and dynamics of the press closed gap adjuster.This article describes how to determine the closed gap adjusting accuracy of the press. Eight experiments have been conducted to evaluate a working out control signal to the linear movement of the press punch when using the research facility. It is noted that the linear positioning accuracy of the press punch reaches the hundredth parts of a millimeter of the adjustment value that is sufficient to achieve the required precision when performing operations such as

  17. Universe symmetries

    International Nuclear Information System (INIS)

    Souriau, J.M.

    1984-01-01

    The sky uniformity can be noticed in studying the repartition of objects far enough. The sky isotropy description uses space rotations. The group theory elements will allow to give a meaning at the same time precise and general to the word a ''symmetry''. Universe models are reviewed, which must have both of the following qualities: - conformity with the physic known laws; - rigorous symmetry following one of the permitted groups. Each of the models foresees that universe evolution obeys an evolution equation. Expansion and big-bang theory are recalled. Is universe an open or closed space. Universe is also electrically neutral. That leads to a work hypothesis: the existing matter is not given data of universe but it appeared by evolution from nothing. Problem of matter and antimatter is then raised up together with its place in universe [fr

  18. The antimatter. Press breakfast 23 may 2000; L'antimatiere. Petit dejeuner de presse 23 mai 2000

    Energy Technology Data Exchange (ETDEWEB)

    Spiro, M; Dejardin, M; Debu, P; Aleksan, R [CEA/Saclay, Dept. d' Astrophysique, de la Physique des Particules, de la Physique Nucleaire et de l' Instrumentation Associee (DAPNIA), 91 - Gif-sur-Yvette (France)

    2000-05-01

    This document brings together the subjects discussed during the Press breakfast of 23 may 2000 on the antimatter, with scientists of the CEA and the CNRS. It presents the research programs and the experiments on the antimatter and the symmetry violation: the CP LEAR and the NA48 experiments at CERN, the BaBar detector at SLAC, the fundamental research at the CEA and the impacts on the energy policy. It provides also links for more detailed inquiries. (A.L.B.)

  19. Biological effects of the ionizing radiation. Press breakfast; Effets biologiques des rayonnements ionisants. Petit dejeuner de presse

    Energy Technology Data Exchange (ETDEWEB)

    Flury-Herard, A [CEA, Direction des Sciences du Vivant, DSV, 75 - Paris (France); Boiteux, S; Dutrillaux, B [CEA/Fontenay-aux-Roses, Direction des Sciences du Vivant, DSV, 92 (France); Toledano, M [CEA Saclay, Direction des Sciences du Vivant, DSV, 91 - Gif-sur-Yvette (France)

    2000-06-01

    This document brings together the subjects discussed during the Press breakfast of 29 june 2000 on the biological effects of the ionizing radiations, with scientists of the CEA and the CNRS. It presents the research programs and provides inquiries on the NDA operating to introduce the NDA damages by ionizing radiations, the possible repairs and the repair efficiency facing the carcinogenesis. Those researches allow the scientists to define laws on radiation protection. (A.L.B.)

  20. Book Review: Strategy: The Logic of War and Peace rev. and enlarged ed. by Edward N. Luttwak Cambridge, MA: The Belknap Press of Harvard University Press, 2001

    OpenAIRE

    Wirtz, James J.

    2003-01-01

    In the 1980s scholars in the ªelds of history and political science rediscovered the work of Carl von Clausewitz, the Prussian philosopher of war. This renewed interest sparked a brief revival of the study of war and strategy (the latter of which encompasses efforts to exploit war’s dialectic to achieve military and political victory). After relying for decades on operations research to minimize the likelihood of nuclear war by bolstering deterrence—an approach that largely eli...

  1. A Review: R. Baldwin, “The Great Convergence: Information Technology and the New Globalization” (Cambridge: Belknap Press of Harvard University Press, 2016

    Directory of Open Access Journals (Sweden)

    Nicola Montagna

    2017-05-01

    Full Text Available In the introduction of his book, Richard Baldwin ambitiously says that its reading will “change our way to look at globalisation”. While the aim may sound too pretentious and in some respect misplaced, The Great Convergence: Information Technology and the New Globalization is certainly timely. While it is hard to say whether or not globalisation has entered a terminal crisis, it is true that we are witnessing to processes of de-globalisation and relative attempts of national governments to regain some sovreignty. Against the view that globalisation has reached its terminus, this book states that on the contary it is entering a new phase. Its central assertion is that the radical changes in communication technology around 1990s have transformed the nature of globalization, reducing the costs of production and transferring massive north-to-south flows of know-how. What Baldwin calls “New Globalisation” not only has produced a great convergence of profit shares between the most industrialized and some industrializing countries as a consequence of shifting production to the latter, but it also set the basis for a “Third Wave” of globalisation.

  2. On Sums of Numerical Series and Fourier Series

    Science.gov (United States)

    Pavao, H. Germano; de Oliveira, E. Capelas

    2008-01-01

    We discuss a class of trigonometric functions whose corresponding Fourier series, on a conveniently chosen interval, can be used to calculate several numerical series. Particular cases are presented and two recent results involving numerical series are recovered. (Contains 1 note.)

  3. Art, Advertising and Consumption in Por­ firian to Post-Revolution Press

    Directory of Open Access Journals (Sweden)

    Julieta Ortiz Gaitán

    1998-10-01

    Full Text Available The advertisement image is a efficient and convincing means of visual communication. Through mass media and consumption mechanisms, modern societies establish this image as part of a daily iconography that, in turn, has influenced twentieth-century artistic languajes. This work centers on the importance of the advertisement image in Mexican press, through its historical and social development, emphasizing its plastic values and impor­tance as historical document, in the context of Mexican visual arts. As a document, the  advertisement image offers valuable information, for it appears in a period full of historical events and social transformations: from the Porfirian splendor, through the revolution that began in 1910 and  the post-revolutionary years, to the late thirties. As a study subject, the advertisement image has established its own periodicity, as well as the formal and aesthetic qualities that characterize it in the chronological universe analyzed here.

  4. SGEM Hot Off the Press: ultrasound during critical care simulation: a randomized crossover study.

    Science.gov (United States)

    McKenna, Paul; Thoma, Brent; Milne, Ken; Bond, Chris

    2017-01-01

    As part of the Canadian Journal of Emergency Medicine's (CJEM) developing social media strategy, 1 we are collaborating with the Skeptics' Guide to Emergency Medicine (SGEM) to summarize and critically appraise the current emergency medicine (EM) literature using evidence-based medicine principles. In the "Hot Off the Press" series, we select original research manuscripts published in CJEM to be featured on the SGEM website/podcast 2 and discussed by the study authors and the online EM community. A similar collaboration is underway between the SGEM and Academic Emergency Medicine. What follows is a summary of the selected article the immediate post-publication synthesis from the SGEM podcast, commentary by the first author, and the subsequent discussion from the SGEM blog and other social media. Through this series, we hope to enhance the value, accessibility, and application of important, clinically relevant EM research. In this, the third SGEM HOP hosted collaboratively with CJEM, we discuss Olszynski et al.'s randomized crossover study evaluating the use of ultrasound simulator devices during critical care simulation. 3.

  5. Geophysics Under Pressure: Large-Volume Presses Versus the Diamond-Anvil Cell

    Science.gov (United States)

    Hazen, R. M.

    2002-05-01

    Prior to 1970, the legacy of Harvard physicist Percy Bridgman dominated high-pressure geophysics. Massive presses with large-volume devices, including piston-cylinder, opposed-anvil, and multi-anvil configurations, were widely used in both science and industry to achieve a range of crustal and upper mantle temperatures and pressures. George Kennedy of UCLA was a particularly influential advocate of large-volume apparatus for geophysical research prior to his death in 1980. The high-pressure scene began to change in 1959 with the invention of the diamond-anvil cell, which was designed simultaneously and independently by John Jamieson at the University of Chicago and Alvin Van Valkenburg at the National Bureau of Standards in Washington, DC. The compact, inexpensive diamond cell achieved record static pressures and had the advantage of optical access to the high-pressure environment. Nevertheless, members of the geophysical community, who favored the substantial sample volumes, geothermally relevant temperature range, and satisfying bulk of large-volume presses, initially viewed the diamond cell with indifference or even contempt. Several factors led to a gradual shift in emphasis from large-volume presses to diamond-anvil cells in geophysical research during the 1960s and 1970s. These factors include (1) their relatively low cost at time of fiscal restraint, (2) Alvin Van Valkenburg's new position as a Program Director at the National Science Foundation in 1964 (when George Kennedy's proposal for a Nation High-Pressure Laboratory was rejected), (3) the development of lasers and micro-analytical spectroscopic techniques suitable for analyzing samples in a diamond cell, and (4) the attainment of record pressures (e.g., 100 GPa in 1975 by Mao and Bell at the Geophysical Laboratory). Today, a more balanced collaborative approach has been adopted by the geophysics and mineral physics community. Many high-pressure laboratories operate a new generation of less expensive

  6. Observing the very early universe

    CERN Document Server

    Steinhardt, Paul Joseph

    1995-01-01

    Cosmology is entering an historic epoch in which a dazzling array of new observations will decisively test our theories of the origin and evolution of the Universe. Many of the theoretical proposals have profound implications for our understanding of high-energy physics. This lecture series will review some of the leading ideas, especially the inflationary model of the universe, and explain the astrophysical and cosmological observations anticipated for the next decade that will be critical in determining their validity.

  7. Results and problems in the development of machines employed in pressing technology

    Energy Technology Data Exchange (ETDEWEB)

    Dietrich, P; Hinne, H; Linke, L; Nerger, R

    1980-08-01

    Features specifications and technical improvements of nine GDR made briquetting presses from the Zemag Zeitz company. Briquetting presses have been produced by the company for more than 100 years, the present capacity of the machines ranges from 5.1 t/h to 20.4 t/h of nominal briquet production. Development trends are directed toward larger presses. The prototype PSA 400, based on the design of the four channel press PSA 300, will be tested in industrial operation during 1980/81. Various technical details on the general briquetting press design are enumerated, including experiences gained with steam or electric power operated presses, regulation of the pressing speed with a patented switch gear system, maintenance of crank gear bearings, greasing of steam driven presses, investigation of crack damages to the machine block, further measures for reducing wear of the pressing channel and mechanized welding methods for the channel overhaul. (In German)

  8. Ex-PRESS glaucoma filter: an MRI compatible metallic orbital foreign body imaged at 1.5 and 3 T

    International Nuclear Information System (INIS)

    Mabray, M.C.; Uzelac, A.; Talbott, J.F.; Lin, S.C.; Gean, A.D.

    2015-01-01

    Aim: To report on the MRI compatibility of the Ex-PRESS glaucoma filtration device, a tiny metallic implant placed into the anterior chamber of the eye that is much smaller than traditional glaucoma shunts, and to educate the radiology community regarding its appearance. Materials and methods: Seven patients with Ex-PRESS glaucoma filtration devices were identified that had undergone MRI at San Francisco General Hospital/University of California San Francisco Medical Center by searching and cross-referencing the radiology reporting system and the electronic medical record. MRI images were reviewed for artefact interfering with interpretation. Ophthalmology examinations were reviewed for evidence of complications. Results: Eighteen individual MRI examinations were performed during 12 unique MRI events on these 7 patients. 13/18 individual MRI examinations and 7/12 MRI events were performed at 3 T with the others performed at 1.5 T. Mean time from Ex-PRESS implantation to MRI was 17.5 months. Mean time from MRI to first ophthalmology examination was 1.1 months and from MRI to latest ophthalmology examination was 6.6 months. Susceptibility artefact did not interfere with image interpretation and no complications related to MRI were encountered. Conclusion: The Ex-PRESS glaucoma filtration device appears to be safe for MRI at 1.5 and 3 T and does not produce significant susceptibility artefact to affect diagnostic interpretation adversely. - Highlights: • The Ex-PRESS glaucoma filtration device is a tiny metallic orbital implant. • It can simulate a metallic orbital foreign body on imaging. • There is little information in the literature about it's MRI safety. • We report 18 MRIs performed on 7 patients including the first at 3 T. • Imaging appears to be safe at 1.5 and 3 T in patients with this device

  9. Visual time series analysis

    DEFF Research Database (Denmark)

    Fischer, Paul; Hilbert, Astrid

    2012-01-01

    We introduce a platform which supplies an easy-to-handle, interactive, extendable, and fast analysis tool for time series analysis. In contrast to other software suits like Maple, Matlab, or R, which use a command-line-like interface and where the user has to memorize/look-up the appropriate...... commands, our application is select-and-click-driven. It allows to derive many different sequences of deviations for a given time series and to visualize them in different ways in order to judge their expressive power and to reuse the procedure found. For many transformations or model-ts, the user may...... choose between manual and automated parameter selection. The user can dene new transformations and add them to the system. The application contains efficient implementations of advanced and recent techniques for time series analysis including techniques related to extreme value analysis and filtering...

  10. An Artist in the University Medical Center. Review.

    Science.gov (United States)

    James, A. Everette, Jr.

    1991-01-01

    Reviews "An Artist in the University Medical Center" (M. Lesser, New Orleans: Tulane University Press, 1989), in which the artist captures the human side of the complex Tulane Medical Center in New Orleans (Louisiana). The interplay of drawings, etchings, watercolors, and prose conveys traditions of nurturing in the hospital. (SLD)

  11. Rheumatoid Arthritis Educational Video Series

    Medline Plus

    Full Text Available ... Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... member of our patient care team. Managing Your Arthritis Managing Your Arthritis Managing Chronic Pain and Depression ...

  12. Rheumatoid Arthritis Educational Video Series

    Science.gov (United States)

    ... Corner / Patient Webcasts / Rheumatoid Arthritis Educational Video Series Rheumatoid Arthritis Educational Video Series This series of five videos ... Your Arthritis Managing Chronic Pain and Depression in Arthritis Nutrition & Rheumatoid Arthritis Arthritis and Health-related Quality of Life ...

  13. Time Series Momentum

    DEFF Research Database (Denmark)

    Moskowitz, Tobias J.; Ooi, Yao Hua; Heje Pedersen, Lasse

    2012-01-01

    We document significant “time series momentum” in equity index, currency, commodity, and bond futures for each of the 58 liquid instruments we consider. We find persistence in returns for one to 12 months that partially reverses over longer horizons, consistent with sentiment theories of initial...... under-reaction and delayed over-reaction. A diversified portfolio of time series momentum strategies across all asset classes delivers substantial abnormal returns with little exposure to standard asset pricing factors and performs best during extreme markets. Examining the trading activities...

  14. Predicting chaotic time series

    International Nuclear Information System (INIS)

    Farmer, J.D.; Sidorowich, J.J.

    1987-01-01

    We present a forecasting technique for chaotic data. After embedding a time series in a state space using delay coordinates, we ''learn'' the induced nonlinear mapping using local approximation. This allows us to make short-term predictions of the future behavior of a time series, using information based only on past values. We present an error estimate for this technique, and demonstrate its effectiveness by applying it to several examples, including data from the Mackey-Glass delay differential equation, Rayleigh-Benard convection, and Taylor-Couette flow

  15. Our Universe

    Science.gov (United States)

    Stern, Alan

    2001-03-01

    The Universe in which we live is unimaginably vast and ancient, with countless star systems, galaxies, and extraordinary phenomena such as black holes, dark matter, and gamma ray bursts. What phenomena remain mysteries, even to seasoned scientists? Our Universe is a fascinating collection of essays by some of the world's foremost astrophysicists. Some are theorists, some computational modelers, some observers, but all offer their insights into the most cutting-edge, difficult, and curious aspects of astrophysics. Compiled, the essays describe more than the latest techniques and findings. Each of the ten contributors offers a more personal perspective on their work, revealing what motivates them and how their careers and lives have been shaped by their desire to understand our universe. S. Alan Stern is Director of the Department of Space Studies at Southwest Research Institute in Boulder, Colorado. He is a planetary scientist and astrophysicist with both observational and theoretical interests. Stern is an avid pilot and a principal investigator in NASA's planetary research program, and he was selected to be a NASA space shuttle mission specialist finalist. He is the author of more than 100 papers and popular articles. His most recent book is Pluto & Charon (Wiley, 1997). Contributors: Dr. John Huchra, Harvard University Dr. Esther Hu, University of Hawaii, Honolulu Dr. John Mather, NASA Goddard Space Flight Center Dr. Nick Gnedin, University of Colorado, Boulder Dr. Doug Richstone, University of Michigan, Ann Arbor Dr. Bohdan Paczynski, Princeton University, NJ Dr. Megan Donahue, Space Telescope Science Institute, Baltimore, MD Dr. Jerry Ostriker, Princeton University, New Jersey G. Bothun, University of Oregon, Eugene

  16. Reports of the AAAI 2016 Spring Symposium Series

    NARCIS (Netherlands)

    Amato, C.; Amir, O.; Bryson, J.; Grosz, B.; Indurkhya, B.; Kiciman, E.; Kido, T.; Lawless, W.F.; Liu, M.; McDorman, B.; Mead, R.; Oliehoek, F.A.; Specian, A.; Stojanov, G.; Takadama, K.

    2016-01-01

    The Association for the Advancement of Artificial Intelligence, in cooperation with Stanford University's Department of Computer Science, presented the 2016 Spring Symposium Series on Monday through Wednesday, March 21-23, 2016 at Stanford University. The titles of the seven symposia were (1) AI and

  17. Mechanical Properties of Copper Processed by Equal Channel Angular Pressing

    Science.gov (United States)

    Sülleiová, K.; Ballóková, B.; Besterci, M.; Kvačkaj, T.

    2017-12-01

    The development of the nanostructure in commercial pure copper and the strength and ductility after severe plastic deformation (SPD) with the technology of equal channel angular pressing (ECAP) are analysed. Experimental results and analyses showed that both strength and ductility can be increased simultaneously by SPD. The final grain size decreased from the initial 50μm by SPD to 100-300 nm after 10 passes. An increase of the ductility together with an increase of strength caused by SPD are explained by a strong grain refinement and by a dynamic equilibrium of weakening and strengthening, and it is visible on the final static tensile test stress-strain charts.

  18. NIC (Nuclear Industry in China) exhibition. Press file

    International Nuclear Information System (INIS)

    1998-01-01

    Framatome participated to the NIC exhibition which took place in Beijing (China) on March 1998. This press dossier was distributed to visitors. It presents in a first part the activities of the Framatome group in people's republic of China (new constructions (Daya Bay, Ling Ao project), technological cooperation and contracts in the nuclear domain, technology transfers in the domain of nuclear fuels, activities and daughter companies in the domain of industrial equipments, Framatome Connectors International (FCI) daughter company in the domain of connectors engineering). Then, the general activities of Framatome in the nuclear, industrial equipment, and connectors engineering domains are summarized in the next 3 parts. (J.S.)

  19. The pressing energy innovation challenge of the US National Laboratories

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Bin-Nun, Amitai Y.; Narayanamurti, Venkatesh

    2016-10-01

    Accelerating the development and deployment of energy technologies is a pressing challenge. Doing so will require policy reform that improves the efficacy of public research organizations and strengthens the links between public and private innovators. With their US$14 billion annual budget and unique mandates, the US National Laboratories have the potential to critically advance energy innovation, yet reviews of their performance find several areas of weak organizational design. Here, we discuss the challenges the National Laboratories face in engaging the private sector, increasing their contributions to transformative research, and developing culture and management practices to better support innovation. We also offer recommendations for how policymakers can address these challenges.

  20. Press Manipulation and Its Negative Impact on the Youth

    Directory of Open Access Journals (Sweden)

    Ioana Manea

    2010-12-01

    Full Text Available Nowadays, manipulation may be regarded as an essential instrument of the “mass industrial society”, aiming at the conclusion of certain agreements that are convenient to the issuing party, turning to deceit with falsified arguments, as well as to appeals to emotional or non-rational components. The particular forms that it takes in various fields of social life may be found anywhere, from the political form to the economic one. Press strategies have the capacity of manipulating the young consumer’s behaviour, generating numerous negative effects on their everyday life.

  1. [Cigarette and alcohol advertising in the Swiss free press].

    Science.gov (United States)

    Olivier, Jacques

    2014-11-26

    Tobacco and alcohol are ordinary consumer goods that are still two overriding preventable causes of death in Switzerland. Massive advertising supports their selling and contributes to maintain a major public health problem up to date. The widely read free press represents an interesting advertising mean. The study of tobacco and alcohol advertisements published in the free newspaper 20 minutes through the year 2012 gives us a good idea of these products' advertising strategies. Compared to those for alcohol, the cigarette advertisements are more numerous, more suggestive and dealing with emotions. The themes proposed respond to young people's expectations in order to incline them to smoke, whereas positive images encourage to keep on smoking.

  2. Hot pressing of uranium nitride and mixed uranium plutonium nitride

    International Nuclear Information System (INIS)

    Chang, J.Y.

    1975-01-01

    The hot pressing characteristics of uranium nitride and mixed uranium plutonium nitride were studied. The utilization of computer programs together with the experimental technique developed in the present study may serve as a useful purpose of prediction and fabrication of advanced reactor fuel and other high temperature ceramic materials for the future. The densification of nitrides follow closely with a plastic flow theory expressed as: d rho/ dt = A/T(t) (1-rho) [1/1-(1-rho)/sup 2/3/ + B1n (1-rho)] The coefficients, A and B, were obtained from experiment and computer curve fitting. (8 figures) (U.S.)

  3. STS-114: Discovery Crew Post Landing Press Briefing

    Science.gov (United States)

    2005-01-01

    The crew of the STS-114 Discovery is shown during a post landing press briefing. Commander Collins introduces the crew members who consist of Pilot Jim Kelley, Mission Specialist Soichi Noguchi from JAXA, Steve Robinson, Mission Specialist and Charlie Camarda, Mission Specialist. Steve Robinson answers a question from the news media about the repair that he performed in orbit, and his feelings about being back in his hometown of California. Commander Collins talks about the most significant accomplishment of the mission. The briefing ends as each crewmember reflects on the Space Shuttle Columbia tragedy and expresses their personal thoughts and feelings as they re-entered the Earth's atmosphere.

  4. Dynamic balance abilities of collegiate men for the bench press.

    Science.gov (United States)

    Piper, Timothy J; Radlo, Steven J; Smith, Thomas J; Woodward, Ryan W

    2012-12-01

    This study investigated the dynamic balance detection ability of college men for the bench press exercise. Thirty-five college men (mean ± SD: age = 22.4 ± 2.76 years, bench press experience = 8.3 ± 2.79 years, and estimated 1RM = 120.1 ± 21.8 kg) completed 1 repetition of the bench press repetitions for each of 3 bar loading arrangements. In a randomized fashion, subjects performed the bench press with a 20-kg barbell loaded with one of the following: a balanced load, one 20-kg plate on each side; an imbalanced asymmetrical load, one 20-kg plate on one side and a 20-kg plate plus a 1.25-kg plate on the other side; or an imbalanced asymmetrical center of mass, 20-kg plate on one side and sixteen 1.25-kg plates on the other side. Subjects were blindfolded and wore ear protection throughout all testing to decrease the ability to otherwise detect loads. Binomial data analysis indicated that subjects correctly detected the imbalance of the imbalanced asymmetrical center of mass condition (p[correct detection] = 0.89, p < 0.01) but did not correctly detect the balanced condition (p[correct detection] = 0.46, p = 0.74) or the imbalanced asymmetrical condition (p[correct detection] = 0.60, p = 0.31). Although it appears that a substantial shift in the center of mass of plates leads to the detection of barbell imbalance, minor changes of the addition of 1.25 kg (2.5 lb) to the asymmetrical condition did not result in consistent detection. Our data indicate that the establishment of a biofeedback loop capable of determining balance detection was only realized under a high degree of imbalance. Although balance detection was not present in either the even or the slightly uneven loading condition, the inclusion of balance training for upper body may be futile if exercises are unable to establish such a feedback loop and thus eliciting an improvement of balance performance.

  5. Tribologic analysis and technical innovation for rotary molding press

    International Nuclear Information System (INIS)

    Luo Wei; Bai Yumeng; Dai Xingjian

    2012-01-01

    The rotary molding press R53C-Y is the key facility in the compression molding working procedure of the nu clear fuel pellets. Its main compression assembly called the upper compression roller frame has been worn seriously during the production. At first, the mechanical model of the upper compression roller assembly was established for analysis and calculation physical strength. Then the wear causations of the upper compression roller frame were analyzed, and the existent problems of central lubrication system were discussed. Finally, Oil-air central lubrication system was designed considering the characteristic of nuclear fuel pellets production. (authors)

  6. Kustomoitu responsiivinen WordPress-sivusto suomalaiselle Toisenlainen-elokuvalle

    OpenAIRE

    Räsänen, Kati

    2016-01-01

    Opinnäytetyö kertoo Toisenlainen-nimiselle suomalaiselle elokuvalle toteutetusta verkkosivuprojektista. Sivuston pohjana käytettiin WordPress-sisällönhallintajärjestelmää ja sivuston teossa huomioitiin sen skaalautuvuus sekä käytettävyys eri päätelaitteilla. Tutkimusraportissa käsitellään myös tarkemmin responsiivista verkkosivukehitystä sekä sitä, millaisia uusia ajatus- ja toimintamalleja se verkkosivujen tekijöiltä vaatii. Lisäksi raportissa käydään läpi responsiiviseen kehitykseen lii...

  7. 'Combating' tropical diseases in the German colonial press.

    Science.gov (United States)

    Correa, Sílvio Marcus de Souza

    2013-03-01

    This article shows how much certain German language newspapers were a vehicule for reporting to the lay public on 'combating' tropical diseases. Through the press, immigrants and their descendents in Brazil were informed not only about the diseases which afflicted German colonists in Africa, but also about measures concerning sanitation, prophylaxis and experiments with tropical medicine, etc. Based on hemerographic sources, it shows how successful the overseas German communities were in sharing their experiences regarding health in tropical and/or sub-tropical regions.

  8. FILMING OF 'CONTACT' AT LC39 PRESS SITE

    Science.gov (United States)

    1997-01-01

    Warner Bros.' cast and crew are filming scenes for the movie 'Contact' at Kennedy Space Center's Launch Complex 39 Press Site on January 30. The screenplay for 'Contact' is based on the best- selling novel by the late astronomer Carl Sagan. The cast includes Jodie Foster, Matthew McConaughey, John Hurt, James Woods, Tom Skerritt, David Morse, William Fichtner, Rob Lowe and Angela Bassett. Described by Warner Bros. as a science fiction drama, 'Contact' will depict humankind's first encounter with evidence of extraterrestrial life.

  9. ACADEMIC TRAINING LECTURE SERIES

    CERN Multimedia

    2003-01-01

    27, 28, 29, 30, 31 January from 11.00 to 12.00 hrs - Auditorium, bldg. 500 on 27, 28, 30, 31 January Council room on 29 January Cosmology : The Homogeneous Universe and the Evolution of Structures BY R. DURRER, UNIVERSITY OF GENEVA, CH In my course I will first give and introduction to standard cosmology. I discuss the equations of the homogeneous and isotropic universe and I'll briefly summarize its thermal history. After that I want to concentrate on the fluctuations in the universe. We will study anisotropies in the cosmic microwave background, fluctuations of the matter density and the velocity field and weak lensing. I want to explain especially new cosmological data which are coming up right now and their implication for the cosmological model.

  10. Danish television drama series

    DEFF Research Database (Denmark)

    Degn, Hans-Peter; Krogager, Stinne Gunder Strøm

    2017-01-01

    In recent years, Danish television drama series have become an internationally acclaimed export success. This article analyses the development on the domestic market lying behind this international recognition. A change in production dogmas has formed the characteristics of these successful Danish...... the characteristics of these productions and the development of their audience profiles across age, gender and educational level....

  11. Composition: Unity - Diversity series

    DEFF Research Database (Denmark)

    Bergstrøm-Nielsen, Carl

    2015-01-01

    Unity-Diversity series are open compositions to be realised by improvising musicians. See more about my composition practise in the entry "Composition - General Introduction". This work is licensed under a Creative Commons "by-nc" License. You may for non-commercial purposes use and distribute it...

  12. Series, Prof. George William

    Indian Academy of Sciences (India)

    Home; Fellowship. Fellow Profile. Elected: 1984 Honorary. Series, Prof. George William. Date of birth: 22 February 1920. Date of death: 2 January 1995. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. 29th Mid-year meeting. Posted on 19 January 2018. The 29th Mid-year meeting of the Academy will be held ...

  13. Simple Hofmeister series

    NARCIS (Netherlands)

    Lyklema, J.

    2009-01-01

    Hofmeister, or lyotropic, series date back to 1888, when the founder arranged a large number of electrolytes in sequences with respect to their effectiveness salting out egg white. Since then the name has been applied to various phenomena involving ion specificity. In order to isolate effects

  14. Intelligent Universe

    Energy Technology Data Exchange (ETDEWEB)

    Hoyle, F

    1983-01-01

    The subject is covered in chapters, entitled: chance and the universe (synthesis of proteins; the primordial soup); the gospel according to Darwin (discussion of Darwin theory of evolution); life did not originate on earth (fossils from space; life in space); the interstellar connection (living dust between the stars; bacteria in space falling to the earth; interplanetary dust); evolution by cosmic control (microorganisms; genetics); why aren't the others here (a cosmic origin of life); after the big bang (big bang and steady state); the information rich universe; what is intelligence up to; the intelligent universe.

  15. Preparation and microstructure of hot-pressed YIG

    International Nuclear Information System (INIS)

    Abdul Halim Shaari; Mansor Hashim; Sidek Haji Abd Aziz

    1992-01-01

    Bulk magnetic ceramics such as yttrium-iron-garnet (YIG) and nickel-zinc ferrite were prepared by the conventional-firing and hot-press techniques. Pre-sintering and sintering, both in air, were carried out at temperature ≥ 1200 0 C. Initial density and microstructural measurements show that the high density samples with uniform grain size can be readily achieved by hot-pressing. The well-defined microstructures, the high density attained. The agreement of saturation magnetization 4πMs values and the high resistivities indicated that the optimized preparation conditions for conventional firing yielded yttrium-iron-garnet of good quality. Quenched and isochronally annealed, the YIG samples were also found to retain their room-temperature saturation-magnetization and resonance linewidth values after any single heat treatment. However, the electrical resistivity and the effective linewidth clearly exhibited isochronal recovery. A possible model to explain this behaviour and its implications on microwave applications are discussed. Ferrites of the type MFe 2 O 4 where M=Mg, Mn, Co, Fe, Cu, Zn and Cd and of the type Ni1-2xSnxFe 2 O4 have also been prepared and their properties are being studied

  16. Climate change and daily press : Italy vs Usa parallel analysis

    International Nuclear Information System (INIS)

    Borrelli, G.; Mazzotta, V.; Falconi, C.; Grossi, R.; Farabollini, F.

    1996-06-01

    Among ENEA (Italian National Agency for New Technologies, Energy, and the Environment) activities, one deals with analysis and strategies of environmental information. A survey of four daily newspaper coverage, on an issue (Global Climate Change) belonging to this area, has been realized. The involved newspapers are: two Italian ones, namely 'La Repubblica' and 'Il Corriere della Sera', two North-American ones, namely 'New York Times' and 'Washington Post'. Purpose of the work was that of detecting the qualitative and quantitative level of consciousness of the Italian press via a comparison with the North-American press, notoriously sensible and careful on environmental issues. The number of articled analyzed is partitioned in the following numerical data: 319 for the 'New York Times', 309 for the 'Washington Post', 146 for the 'Corriere della Sera', 81 articles for 'La Repubblica'. The time period covered for the analysis spans from 1989, initiatic year for the organization of the 1992 Rio Conference, to December 1994, deadline date for the submission of national

  17. Treatment of zircaloy cladding hulls by isostatic pressing

    International Nuclear Information System (INIS)

    Tegman, R.; Burstroem, M.

    1984-12-01

    A method for the treatment of Zircaloy fuel hulls is proposed. It involves hot isostatic pressing (HIP) for making large, completely densified metallic bodies of the waste. The hulls are packed into a bellows-shaped container of steel. On packing the fuel hulls give a filling factor of only 14%, which is too low for non-deformable compaction in a normal container, but by using a belloped container, a non-deformable compaction can be obtained without any pretreatment of the hulls. Fully dense and mechanically strong blocks of Zircaloy can be fabricated by holding them at temperatures of around 1000 degrees C for three hours. It is also feasible to incorporate the other metallic parts of the fuel bundle, such as top and bottom tie plates and spacers, in the pressing. The HIP-densified hulls provide an effective means of self-containment of radioactive waste due to the excellent corrosion resistance of Zircaloy. A waste loading factor of close to 100% can be realized. Futher, a volume reduction factor of 7 and a surface reduction factor of aout 250 for a 1-ton canister can be achieved. Equilibrium calculations have shown that tritium present in the hulls can quantitatively be contained in the HIPed block. A study has been made of a possible process for industrilscale use. (Author)

  18. Diachronic changes in word probability distributions in daily press

    Directory of Open Access Journals (Sweden)

    Stanković Jelena

    2006-01-01

    Full Text Available Changes in probability distributions of individual words and word types were investigated within two samples of daily press in the span of fifty years. Two samples of daily press were used in this study. The one derived from the Corpus of Serbian Language (CSL /Kostić, Đ., 2001/ that covers period between 1945. and 1957. and the other derived from the Ebart Media Documentation (EBR that was complied from seven daily news and five weekly magazines from 2002. and 2003. Each sample consisted of about 1 million words. The obtained results indicate that nouns and adjectives were more frequent in the CSL, while verbs and prepositions are more frequent in the EBR sample, suggesting a decrease of sentence length in the last five decades. Conspicuous changes in probability distribution of individual words were observed for nouns and adjectives, while minimal or no changes were observed for verbs and prepositions. Such an outcome suggests that nouns and adjectives are most susceptible to diachronic changes, while verbs and prepositions appear to be resistant to such changes.

  19. Gender violence news in British and American press

    Directory of Open Access Journals (Sweden)

    Sara Bustinduy

    2016-03-01

    Full Text Available This study aims to prove which qualities, from the British and United States actual press, are more adequate for gender violence issues, comparing news on the same stories. It is evident the influence of mass media on public opinion and, therefore, the responsibility that written press has on gender violence messages, avoiding sensationalism. Psycholinguistic studies have established the relation language-thought, so language used in journalism is crucial. Following the belief that newspapers considered more liberal and independent will lead to a better treatment than traditional ones considered to be more reluctant to change, journals have been selected. Furthermore, different cultures can be as objective and respectful but maybe less committed with the issue, as it may arise from the samples. There have been emerging ethic codes giving guidelines to journalists, including discrimination, and more specific on gender sensitive reporting. Therefore, the objective to improve public opinion information, stepping away from stereotypes and oversimplifications, is substantial, and will undoubtedly result in a better understanding of equality.

  20. Incineration ashes conditioning by isostatic pressing and melting

    International Nuclear Information System (INIS)

    Jouan, A.; Ouvrier, N.; Teulon, F.

    1990-01-01

    Alpha-bearing solid incineration wastes are conditioned for two principal reasons: to enhance the quality of the finished product for long-term storage, and to reduce the total waste volume. Isostatic pressing parameters were defined using containers 36 mm in diameter; the physicochemical properties of the compacted ashes were determined with 140 mm diameter containers and industrial feasibility was demonstrated with a large (300 mm diameter) container. Two types of ashes were used: ashes fabricated at Marcoule (either in devices developed by the CEA for the MELOX project with a standard MELOX composition, or by direct incineration at COGEMA's UP1 plant) and fly ash from a domestic waste incinerator. A major engineering study was also undertaken to compare the three known ash containment processes: isostatic pressing, melting, and cement-resin matrix embedding. The flowsheet, operational chronology and control principles were detailed for each process, and a typical plant layout was defined to allow comparisons of both investment and operating costs

  1. Effects of different vibration exercises on bench press.

    Science.gov (United States)

    Marín, P J; Torres-Luque, G; Hernández-García, R; García-López, D; Garatachea, N

    2011-10-01

    This study was undertaken to analyze the effects of different vibration recovery strategies via feet or hands on the number of repetitions performed and on mean velocity, peak velocity and blood lactate concentration during consecutive bench-press sets. 9 elite judo athletes performed 3 sets of bench press at 60% of one-repetition maximum (1RM), leading to failure and allowing a 180 s rest period between sets. During the rest period, 1 of the 3 following procedures was performed: 150 s rest plus 30 s push-up vibration exercise (Push-up), 150 s rest plus 30 s squat vibration exercise (Squat) or 180 s only rest (Passive). Statistical analysis revealed that the Squat condition resulted in a significant increase in the number of repetitions achieved, in comparison with all other rest strategies. However, kinematic parameters and blood lactate concentration were not affected by vibration. These data suggest that a vibration stimulus applied to the feet, between sets, can result in positive improvements in upper body resistance exercise performance. Although the mechanisms are not fully understood, this positive effect of vibration could be due to an increased motor cortex excitability and voluntary drive. © Georg Thieme Verlag KG Stuttgart · New York.

  2. Kennedy Space Center Press Site (SWMU 074) Interim Measure Report

    Science.gov (United States)

    Applegate, Joseph L.

    2015-01-01

    This report summarizes the Interim Measure (IM) activities conducted at the Kennedy Space Center (KSC) Press Site ("the Press Site"). This facility has been designated as Solid Waste Management Unit 074 under KSC's Resource Conservation and Recovery Act Corrective Action program. The activities were completed as part of the Vehicle Assembly Building (VAB) Area Land Use Controls Implementation Plan (LUCIP) Elimination Project. The purpose of the VAB Area LUCIP Elimination Project was to delineate and remove soil affected with constituents of concern (COCs) that historically resulted in Land Use Controls (LUCs). The goal of the project was to eliminate the LUCs on soil. LUCs for groundwater were not addressed as part of the project and are not discussed in this report. This report is intended to meet the Florida Department of Environmental Protection (FDEP) Corrective Action Management Plan requirement as part of the KSC Hazardous and Solid Waste Amendments permit and the U.S. Environmental Protection Agency's (USEPA's) Toxic Substance Control Act (TSCA) self-implementing polychlorinated biphenyl (PCB) cleanup requirements of 40 Code of Federal Regulations (CFR) 761.61(a).

  3. Muscle synergies during bench press are reliable across days.

    Science.gov (United States)

    Kristiansen, Mathias; Samani, Afshin; Madeleine, Pascal; Hansen, Ernst Albin

    2016-10-01

    Muscle synergies have been investigated during different types of human movement using nonnegative matrix factorization. However, there are not any reports available on the reliability of the method. To evaluate between-day reliability, 21 subjects performed bench press, in two test sessions separated by approximately 7days. The movement consisted of 3 sets of 8 repetitions at 60% of the three repetition maximum in bench press. Muscle synergies were extracted from electromyography data of 13 muscles, using nonnegative matrix factorization. To evaluate between-day reliability, we performed a cross-correlation analysis and a cross-validation analysis, in which the synergy components extracted in the first test session were recomputed, using the fixed synergy components from the second test session. Two muscle synergies accounted for >90% of the total variance, and reflected the concentric and eccentric phase, respectively. The cross-correlation values were strong to very strong (r-values between 0.58 and 0.89), while the cross-validation values ranged from substantial to almost perfect (ICC3, 1 values between 0.70 and 0.95). The present findings revealed that the same general structure of the muscle synergies was present across days and the extraction of muscle synergies is thus deemed reliable. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Means of temporal expressions in newspaper news and press report

    Directory of Open Access Journals (Sweden)

    Čutura Ilijana R.

    2016-01-01

    Full Text Available This paper analyses most frequent linguistic means for expressing the temporal frame in the printed news and press reports. With structuralism as a chosen theoretical framework, the approach of the research is qualitative and stylistic. Since the study belongs to the field of functional stylistics, the primary methods used in the study were functional-stylistic and linguistic-stylistic ones. As the study focuses on two newspaper genres, comparative-stylistic method was used as well. The analysis has been conducted on concrete linguistic excerpts from Serbian daily newspapers published throughout Serbia from 2008 to 2015. The aims of the paper are to show model of expressing temporal frame in contemporary Serbian newspapers. This paper provides an overview of the characteristics of model and the types of temporal expression as well as their variations in contemporal Serbian newspapers. The paper also aims to determine the differencies between printed news and press reports by the choice of temporal expressions. It is shown that there is a tendency of changing schematized structure of these informative genres and some innovation in relation to the choice of linguistic means for expessing the meaning of temporally close events. The research is a contribution to journalism stylistics, more precisely to the Serbian language newspaper stylistics, and also contributes to the study of linguistic and stylistic characteristics of non-literary texts. The study is also relevant because it describes the use of adverbs and adverbial expressions in the journalistic style.

  5. Feasibility of tailoring of press formed thermoplastic composite parts

    Science.gov (United States)

    Sinke, J.

    2018-05-01

    The Tailor Made Blank concept is widely accepted in the production of sheet metal parts. By joining, adding and subtracting materials, and sometimes even applying different alloys, parts can be produced more efficiently by cost and/or weight, and new design options have been discovered. This paper is about the manufacture of press formed parts of Fibre Reinforced Thermoplastics and the evaluation whether the Tailoring concept, though adapted to the material behavior of FRTP, can be applied to these composites as well. From research, the first results and ideas are presented. One of the ideas is the multistep forming process, creating parts with thickness variations and combinations of fibre orientations that are usually not feasible using common press forming strategies. Another idea is the blending of different prepreg materials in one component. This might be useful in case of specific details, like for areas of mechanical fastening or to avoid carbon/metal contact, otherwise resulting in severe corrosion. In a brief overview, future perspectives of the potential of the Tailoring concept are presented.

  6. Precision Force Control for an Electro-Hydraulic Press Machine

    Directory of Open Access Journals (Sweden)

    Hong-Ming Chen

    2014-08-01

    Full Text Available This thesis is primarily intended to design a PC-based control system to control the force of an electro-hydraulic servo press system for implementing precision force control. The main feature is to develop a composite control by using the relief valve and the flow servo valve. Using feedback from a force sensor, a fuzzy controller was designed with LabVIEW software as the system control core for achieving a precision force control for the hydraulic cylinder on its travel and output. The weakness of hydraulic systems is that hydraulic oil is compressible and prone to leaking, and its characteristics can vary with oil temperature, thus making it difficult for a general linear controller to achieve accurate control. Therefore, a fuzzy controller was designed with LabVIEW along with a NI-PCI_6221 interface card and a load cell to control the servo valve flow and the relief valve to control the pressure source. The testing results indicate that accurate force control output of an electro-hydraulic servo press system can be obtained.

  7. LSA glass-ceramic tiles made by powder pressing

    International Nuclear Information System (INIS)

    Figueira, F.C.; Bertan, F.M.; Riella, H.G.; Uggioni, E.; Bernardin, A.M.

    2009-01-01

    A low cost alternative for the production of glass-ceramic materials is the pressing of the matrix glass powders and its consolidation simultaneously with crystallization in a single stage of sintering. The main objective of this work was to obtain LSA glass ceramics with low thermal expansion, processed by pressing and sintering a ceramic frit powder. The raw materials were homogenized and melted (1480 deg C, 80min), and the melt was poured in water. The glass was chemically (XRF and AAS) and thermally (DTA, 10 deg C/min, air) characterized, and then ground (60min and 120min). The ground powders were characterized (laser diffraction) and compressed (35MPa and 45MPa), thus forming four systems. The compacts were dried (150 deg C, 24h) and sintered (1175 deg C and 1185 deg C, 10 deg C/min). Finally, the glass-ceramics were characterized by microstructural analysis (SEM and XRD), mechanical behavior (σbending) and thermal analysis (α). The best results for thermal expansion were those for the glass-ceramics processed with smaller particle size and greater compaction pressure. (author)

  8. Does community participation set the local press agenda? A view on deliberative and civic practices in the Portuguese press

    OpenAIRE

    Ferreira, Gil Baptista

    2013-01-01

    What are journalists’ perceptions of the citizen’s role in democratic life? What is the role that journalists attribute to the public in the construction of the news agenda? The main goal of this study is to investigate the relationship between the local press, citizens and civic practices. It takes as starting point a dual theoretical approach, the theory of deliberative democracy and the public journalism movement, to assess the scope of the concept of “deliberative journalism.” Under the a...

  9. Ireland’s Press Ombudsman, John Horgan, on accountability, regulation and redress: Where do press councils stand?

    OpenAIRE

    Horgan, John

    2012-01-01

    In recent years, the creation of a number of press councils in Europe and elsewhere, as well as the concurrent appointment of internal ombudsmen or readers’ representatives in many significant newspapers, particularly in the United States, is a clear response to a growing public perception that there is a need for an appropriate level of accountability for the print media. It is fair to assume that this is related, in part, to a public perception that there is a need for remedies for abuses o...

  10. Stephen Hawking's Universe. Teacher's Guide.

    Science.gov (United States)

    Thompson, Malcolm H.; Rameau, Jonathan D.

    This program guide is meant to help teachers assist their students in viewing the six-part public television series, "Stephen Hawking's Universe." The guide features program summaries that give background information and brief synopses of the programs; previewing activities that familiarize students with the subject; vocabulary that…

  11. The organization of the Universe

    International Nuclear Information System (INIS)

    Wilkinson, D.

    1981-01-01

    In this introductory lecture of a series on the nature of matter the author establishes the range and scale of the particles and forces involved and considers the Universe in which they are found. Gravity, electromagnetism, the strong and the weak forces and their possible unification in Grand Unified Theories are discussed. The origin of the Universe, the Big Bang model and the present observable Universe, its dimensions and the forces that shape it are considered. Present thinking is examined concerning the structure of the atom, sub-nuclear forces and the possible constituents of protons and the forces holding them together. (U.K.)

  12. Health-related quality of life and binocular vision in patients with diplopia in acute-onset comitant esotropia with press-on prism improves

    Directory of Open Access Journals (Sweden)

    Qian Wang

    2017-11-01

    Full Text Available AIM: To assess the effect of press-on prisms in patients with acute-onset comitant esotropia and diplopia, focusing primarily on vision-related quality of life and binocular vision. METHODS: Retrospective case-series study. Totally 16 acute-onset comitant esotropia patients with diplopia who received treatment in the Huzhou Central Hospital were included in this study from March 2014 to March 2017. Vision-related quality of life before press-on prism correction and 1mo after press-on prism correction were performed with the Chinese version of the 25-item National Eye Institute Visual Functioning Questionnaire(CHI-NEI-VFQ-25. In each time of follow-up, we made a minute examination, includes worth four dot test and stereo tests. Data was statistically analyzed with paired sample t test, Chi-square test and Fisher's exact test. RESULTS: Except the degree of eye pain, color vision and perimetry, the indicators from CHI-NEI-VFQ-25 table including general health status, overall vision, mental health, social role difficulties, social functional, near activities, distant activities, independency and driving of acute-onset comitant esotropia patients with diplopia were obviously significant improved 1mo after press-on prism correction(PPCONCLUSION: Press-on prism correction may be helpful for binocular vision recovery in acute-onset comitant esotropia patients with diplopia, so as improve the vision-related quality of life.

  13. USAID University

    Data.gov (United States)

    US Agency for International Development — USAID University is USAID's learning management system. Features include 1) Access online courses 2) Register for instructor-led courses 3)Access your student...

  14. Runaway universe

    Energy Technology Data Exchange (ETDEWEB)

    Davies, P

    1978-01-01

    The subject is covered in chapters entitled: the emerging universe (general introduction, history of astronomical and cosmological research, origins, the expanding universe, stars, galaxies, electromagnetic radiation); primeval fire (the big bang model, origin of the elements, properties of the elements and of sub-atomic particles); order out of chaos (galactic evolution, star formation, nuclear fusion, the solar system, origin of life on Earth); a star called Sol (properties of the sun and of other stars); life in the universe; the catastrophe principle (the rise and fall of cosmic order); stardoom (star evolution, neutron stars); black holes and superholes (gravitational collapse); technology and survival; the dying universe (second law of thermodynamics); worlds without end (cosmological models).

  15. Rhodes University

    African Journals Online (AJOL)

    Samridhi Sharma

    2013-10-29

    Oct 29, 2013 ... been taken may improve the reception, by the target audience, of the intended communication. This may ... alcohol marketing. Similarly .... of the intended users (Rhodes University support staff ..... Digital Human Modeling and.

  16. Undulant Universe

    Energy Technology Data Exchange (ETDEWEB)

    Barenboim, Gabriela; /Valencia U.; Mena, Olga; Quigg, Chris; /Fermilab

    2004-12-01

    If the equation of state for ''dark energy'' varies periodically, the expansion of the Universe may have undergone alternating eras of acceleration and deceleration. We examine a specific form that survives existing observational tests, does not single out the present state of the Universe as exceptional, and suggests a future much like the matter-dominated past: a smooth expansion without a final inflationary epoch.

  17. Reporters on the Battlefield. The Embedded Press System in Historical Context

    National Research Council Canada - National Science Library

    Paul, Christopher; Kim, James J

    2004-01-01

    While the history of relations between the press and the military predates modern journalism, much of what had gone before was neutralized by the horrible press-military breakdown that occurred during U.S...

  18. A Comparison of Coverage of Speech and Press Verdicts of Supreme Court.

    Science.gov (United States)

    Hale, F. Dennis

    1979-01-01

    An analysis of the coverage by ten newspapers of 20 United States Supreme Court decisions concerning freedom of the press and 20 decisions concerning freedom of speech revealed that the newspapers gave significantly greater coverage to the press decisions. (GT)

  19. Pressing and tubes rolling out of tungsten of gas phase deposition

    International Nuclear Information System (INIS)

    Korolev, Yu.M.; Kosachev, L.S.; Semiletov, S.S.; Solov'ev, V.F.; Sorkin, V.A.

    1987-01-01

    The possibility of increasing ductility of tubes of tungsten fluoride using heat treatment and plastic deformation- pressing and thermal rolling are studied. When designing the processes of treatment it should be necessarily taken into account that structural state of initial blanks as well as the ratio of deformations in radial and tangential directions under pressing with a rigid needle strongly affects technological properties of pressed tubes. The columnar structure of blanks is undesirable for its embrittlement affects the pressed tubes

  20. Fabrication of fully ceramic microencapsulated fuel by hot pressing

    International Nuclear Information System (INIS)

    Lee, H. G.; Kim, D. J; Park, J. Y.; Kim, W. J.; Lee, S. J

    2014-01-01

    Fully ceramic microencapsulated(FCM) nuclear fuel is one of the recently suggested concept to enhance stability nuclear fuel itself. The requirements to increase the accident tolerance of nuclear fuel are mainly two parts: First, the performance has to be maintained compared to the existing UO 2 nuclear fuel and zircaloy cladding system under the normal operation condition. Second, under the severe accident condition, the high temperature structural integrity has to be kept and the generation rate of hydrogen has to be decrease largely. FCM nuclear fuel consists of tristructural isotropic(TRISO) fuel particle and SiC matrix. The relative thermal conductivity of the SiC matrix as compared to UO 2 is quite good, yielding as-irradiated fuel centerline temperature compared to high temperature for the existing fuel leading to reduced stored energy in the core and reduced operational release of fission products from the fuel. Generally SiC ceramics are fabricated via liquid phase sintering due to strong covalent bonding property and low self-diffusivity coefficient. Hot pressing is very effective method to conduct sintering of SiC powder including different second phase. In this study, SiC-matrix composite including TRISO particles were sintered by hot pressing with Al 2 O 3 -Y 2 O 3 additive system. Various sintering condition were investigated to obtain high relative density above 95%. The internal distribution of TRISO particles within SiC-matrix composite was observed by x-ray radiograph. From the analysis of the cross-section of SiC-matrix composite, the fracture of TRISO particles was investigated. In order to uniform distribution of TRISO particle embedded in the SiC matrix, SiC powder overcoating is considered. SiC matrix composite including TRISO was fabricated by hot pressing. FCM pallets with full density were obtained with Al 2 O 3 -Y 2 O 3 additive system. From the microstructure image, the effect of the sintering additive contents and sintering mechanism