WorldWideScience

Sample records for university engineering education

  1. University Engineering Education and Training in Nigeria ...

    The Nigerian University engineering education and training system is be-set by a number of inadequacies - low entry standards, non-uniformity in entry process for all engineering faculties in the country, moderate academic quality of entrants for the profession, low level knowledge of Mathematics and physical Sciences for ...

  2. Reconstruction of nuclear engineering education in universities

    Kitamura, Masaharu; Tomota, Yo; Tanaka, Shunichi

    2005-01-01

    Nuclear engineering has become the area gradually loosing appeal to the young for these twenty years taking all the circumstances into consideration. However nuclear power is predicted to be primary energy of greatest importance even in the future and this needs highly motivated and excellent personnel in nuclear industry and society so as to develop and maintain nuclear power to a high degree. Under these circumstances discussions on how should be nuclear engineering research and education in the new era were presented from various viewpoints and they led to the direction of reconstruction of nuclear engineering education in universities and relevant organizations to train and ensure personnel. (T. Tanaka)

  3. Nuclear engineering education initiative at Ibaraki University

    Matsumura, Kunihito; Kanto, Yasuhiro; Tanaka, Nobuatsu; Saigusa, Mikio; Kurumada, Akira; Kikuchi, Kenji

    2015-01-01

    With the help of a grant from the Ministry of Education, Culture, Sports, Science and Technology, Ibaraki University has been engaging for six years in the development and preparation of educational environment on nuclear engineering for each of graduate and undergraduate. Core faculty conducts general services including the design and implementation of curriculum, operational improvement, and implementation of lectures. 'Beginner-friendly introduction for nuclear power education' is provided at the Faculty of Engineering, and 'nuclear engineering education program' at the Graduate School of Science and Engineering. All the students who have interest or concern in the accidents at nuclear power plants or the future of nuclear power engineering have opportunities to learn actively. This university participates in the alliance or association with other universities, builds industry - government - academia cooperation with neighboring institutions such as the Japan Atomic Energy Agency, and makes efforts to promote the learning and development of applied skills related to nuclear engineering through training and study tours at each facility. For example, it established the Frontier Applied Atomic Science Center to analyze the structure and function of materials using the strong neutron source of J-PARC. As the efforts after the earthquake accident, it carried out a radiation survey work in Fukushima Prefecture. In addition, it proposed and practiced the projects such as 'development of methods for the evaluation of transfer/fixation properties and decontamination of radioactive substances,' and 'structure analysis of radioactive substances remaining in soil, litter, and polluted water and its application to the decontamination.' (A.O.)

  4. Nuclear engineering education in italian universities

    Dulla, S.; Panella, B.; Ravetto, P.

    2011-01-01

    The paper illustrates the evolution and the present situation of the university-level nuclear engineering education in Italy. The problems connected with the need of qualified faculty in view of a dramatic increase of students is pointed out. A short description of the programs at present available at Italian universities is also presented, together with some statistics referred to Politecnico di Torino. The mathematical and computation content of each programs is also analyzed. (author)

  5. Educating nuclear engineers at German universities

    Knorr, J.

    1995-01-01

    Nuclear technology is a relatively young university discipline. Yet, as a consequence of the declining public acceptance of the peaceful use of nuclear power, its very existence is already being threatened at many universities. However, if Germany needs nuclear power, which undoubtedly is the case, highly qualified, committed experts are required above all. Nuclear technology develops internationally. Consequently, also university education must meet international standards. Generally, university education has been found to be the most effective way of increasing the number of scientific and engineering personnel. Nuclear techniques have meanwhile found acceptance in many other scientific disciplines, thus advancing those branches of science. Teaching needs research; like research in nucelar technology at the national research centers, also the universities are suffering massive financial disadvantages. Research is possible only if outside funds are solicited, which increase dependency and decreases basic research. (orig.) [de

  6. Engineering Education in Research-Intensive Universities

    Alpay, E.; Jones, M. E.

    2012-01-01

    The strengths and weaknesses of engineering education in research-intensive institutions are reported and key areas for developmental focus identified. The work is based on a questionnaire and session summaries used during a two-day international conference held at Imperial College London. The findings highlight several common concerns, such as…

  7. Nuclear science and engineering education at a university research reactor

    Loveland, W.

    1993-01-01

    The role of an on-site irradiation facility in nuclear science and engineering education is examined. Using the example of a university research reactor, the use of such devices in laboratory instruction, public outreach programs, special instructional programs, research, etc. is discussed. Examples from the Oregon State University curriculum in nuclear chemistry, nuclear engineering and radiation health are given. (author) 1 tab

  8. university engineering education and training in nigeria

    user

    entry process for all engineering faculties in the country, moderate academic ... chemical, civil, electrical, electronics, industrial, mechanical, metallurgical ..... and instructional methods improved to ... judiciously and economically applied.

  9. Development of university-industry partnerships in railroad engineering education

    Lautala, Pasi T.

    Rail transportation has been an important part of the North American transportation network since the 19th century and it continues to be a major contributor to the economic well-being and the global competitiveness of the U.S. The recent expansion in freight rail volumes and forecasts for continuous growth, together with more favorable attitudes for urban passenger rail present several challenges for the rail industry. One of the challenges is the availability of a well educated engineering workforce. The rail industry has recognized a need to attract new railroad professionals from various disciplines for management and technical positions, but most universities eliminated railroad engineering from their curricula after the recruitment levels faded several decades ago. Today, railroad expertise and related engineering courses exist at only a few universities and most students graduate without any exposure to rail topics. While industry representatives have expressed their concern about a future workforce, little data is available on the extent of the demand, on the characteristics and skills of preferred candidates, and on the role that universities can play. A benchmarking study was undertaken to investigate the demand for university engineering graduates and assess whether current methods are sufficient to attract, educate, recruit, train and retain engineering students in the railroad profession. Data was collected from industry human resources and training managers to define the quantitative and qualitative needs for railroad engineers. In addition, recently hired engineers working in the rail industry were surveyed to determine the extent of their university exposure in rail topics and how it affected their career choice. The surveys indicated an increase of over 300 percent in the annual recruitment for railroad engineers by the participating companies between 2002 and 2005. Recruitment levels are expected to remain high for the next five to ten years due

  10. Nuclear Power Engineering Education Program, University of Illinois

    Jones, B.G.

    1993-01-01

    The DOE/CECo Nuclear Power Engineering Education Program at the University of Illinois in its first year has significantly impacted the quality of the power education which our students receive. It has contributed to: the recently completed upgrade of the console of our Advanced TRIGA reactor which increases the reactor's utility for training, the procurement of new equipment to upgrade and refurbish several of the undergraduate laboratory set-ups, and the procurement of computational workstations in support of the instructional computing laboratory. In addition, smaller amounts of funds were used for the recruitment and retention of top quality graduate students, the support of faculty to visit other institutions to attract top students into the discipline, and to provide funds for faculty to participate in short courses to improve their skills and background in the power area. These items and activities have helped elevate in the student's perspective the role of nuclear power in the discipline. We feel this is having a favorable impact on student career selection and on ensuring the continued supply of well educated nuclear engineering graduates

  11. Re-engineering university services to manage ICT in education

    Fisser, Petra; van Geloven, M.P.; Franklin, Stephen D.; Strenski, Ellen

    2000-01-01

    Integrating ICT is a hot topic in higher education, in the Netherlands,especially at the University of Twente, the only residential university in the Netherlands. The University of Twente (UT) is profiling itself as a “Telematics University”, a university where telematics applications (or ICT)

  12. Engineering Education for Sustainable Development. The Contribution of University Curricula to Engineering Education for Sustainable Development.

    Kastenhofer, Karen; Lansu, Angelique; Van Dam-Mieras, Rietje; Sotoudeh, Mahshid

    2010-01-01

    Global failures to reach a sustainable development within present-day societies as well as recent breakthroughs within technoscience pose new challenges to engineering education. The list of competencies which engineers should have to rise to these challenges is long and diverse, and often

  13. Technical universities beyond marketization: Educating the virtuous engineer

    Reijers, Wessel Hubert Maria

    2015-01-01

    In this paper, I argue that marketization trends affecting universities in general are strongly present in the management and education of technical universities. Partly, this is due to the historical background of the technical university as such, but marketization can nonetheless negatively affect

  14. Matching grant program for university nuclear engineering education

    Bajorek, Stephen M.

    2002-01-01

    The grant augmented funds from Westinghouse Electric Co. to enhance the Nuclear Engineering program at KSU. The program was designed to provide educational opportunities and to train engineers for careers in the nuclear industry. It provided funding and access to Westinghouse proprietary design codes for graduate and undergraduate studies on topics of current industrial importance. Students had the opportunity to use some of the most advanced nuclear design tools in the industry and to work on actual design problems. The WCOBRA/TRAC code was used to simulate loss of coolant accidents (LOCAs)

  15. Nuclear science and engineering education at a university research reactor

    Loveland, W.

    1990-01-01

    The research and teaching operations of the Nuclear Chemistry Division of the Dept. of Chemistry and the Dept. of Nuclear Engineering are housed at the Oregon State University Radiation Center. This facility which includes a 1.1 MW TRIGA reactor was used for 53 classes from a number of different academic departments last year. About one-half of these classes used the reactor and ∼25% of the reactor's 45 hour week was devoted to teaching. Descriptions will be given of reactor-oriented instructional programs in nuclear engineering, radiation health and nuclear chemistry. In nuclear chemistry, classes in (a) nuclear chemistry for nuclear engineers, (b) radiotracer methods, (c) elementary and advanced activation analysis, and (d) advanced nuclear instrumentation will be described in detail. The use of the facility to promote general nuclear literacy among college students, high school and grade school students and the general population will also be covered

  16. Education and research in biomedical engineering of the Budapest University of Technology and Economics.

    Benyó, Z

    2006-03-01

    Biomedical Engineering is a relatively new interdisciplinary science. This review paper presents the biomedical engineering activity, which is carried out at the Budapest University of Technology and Economics (BUTE) and its partner institutions. In the first parts the main goals and the curriculum of the Biomedical Engineering Education Program is presented. The second part of the paper summarizes the most important biomedical engineering researches most of them carried out in the Biomedical Engineering Laboratory of BUTE.

  17. Current Status and Issues of Nuclear Engineering Research and Educational Facilities in Universities

    2004-01-01

    It is important to discuss about nuclear engineering research and educational facilities in universities after new educational foundation. 12 universities investigated issues and a countermeasure of them. The results of a questionnaire survey, issues and countermeasure are shown in this paper. The questionnaire on the future nuclear researches, development of education, project, maintenance of nuclear and radioactive facilities and accelerator, control of uranium in subcritical test facilities, use of new corporation facilities, the fixed number of student, number of graduate, student experiments, themes of experiments and researches, the state of educational facilities are carried out. The results of questionnaire were summarized as followings: the fixed number of student (B/M/D) on nuclear engineering, exercise of reactor, education, themes, educational and research facilities, significance of nuclear engineering education in university and proposal. (S.Y.)

  18. Development of Nuclear Engineering Educational Program at Ibaraki University with Regional Collaboration

    Matsumura, Kunihito; Kaminaga, Fumito; Kanto, Yasuhiro; Tanaka, Nobuatsu; Saigusa, Mikio; Kikuchi, Kenji; Kurumada, Akira

    The College of Engineering, Ibaraki University is located at the Hitachi city, in the north part of Ibaraki prefecture. Hitachi and Tokai areas are well known as concentration of advanced technology center of nuclear power research organizations. By considering these regional advantages, we developed a new nuclear engineering educational program for students in the Collage of Engineering and The Graduate School of Science and Engineering of Ibaraki University. The program is consisted of the fundamental lectures of nuclear engineering and nuclear engineering experiments. In addition, several observation learning programs by visiting cooperative organizations are also included in the curriculum. In this paper, we report about the progress of the new educational program for nuclear engineering in Ibaraki University.

  19. Engineering Education at a New Public University in Brazil: First Students' Contact with Engineering Methods

    Romero, Jesus Franklin A.; Leite, Patricia; Mantovani, Gerson L.; Lanfredi, Alexandre J. C.; Martins-Filho, Luiz S.

    2011-01-01

    This paper describes the experience of an introductory discipline to the engineering curricula at the Brazilian Federal University of ABC (UFABC). The university offers a common basic curriculum that must be accomplished by every student and can be followed by professionalising courses. The discipline "Introduction to Engineering"…

  20. Generic Competencies in the Education of Engineers: The Case of Engineering Program in a Public University in Mexico

    Serna, Alejandra García; Vega, José Luis Arcos; García, Juan José Sevilla; Ruiz, María Amparo Oliveros

    2018-01-01

    We present an analysis regarding generic skills on engineering program offered in a public state university in Mexico (UABC). The university implemented a new educational model changing rigid programs to flexible programs based on competencies. The goal is to determine generic skills related to the four pillars of learning: learning to do,…

  1. Creating the integral engineer : Combining development education, sustainability, entrepreneurship and technology at Delft University of Technology

    Zwarteveen, J.W.; Blom, E.M.; Vastbinder, B.; Brezet, J.C.

    2010-01-01

    A modern engineer is more than a technical specialist. Training an integral engineer requires education in non-technical skills, including social and ethical aspects. Therefore, Delft University of Technology (DUT) introduced sustainable development and entrepreneurship into its bachelor and master

  2. Lessons Learned on University Education Programs of Chemical Engineering Principles for Nuclear Plant Operations - 13588

    Ryu, Jun-hyung

    2013-01-01

    University education aims to supply qualified human resources for industries. In complex large scale engineering systems such as nuclear power plants, the importance of qualified human resources cannot be underestimated. The corresponding education program should involve many topics systematically. Recently a nuclear engineering program has been initiated in Dongguk University, South Korea. The current education program focuses on undergraduate level nuclear engineering students. Our main objective is to provide industries fresh engineers with the understanding on the interconnection of local parts and the entire systems of nuclear power plants and the associated systems. From the experience there is a huge opportunity for chemical engineering disciple in the context of giving macroscopic overview on nuclear power plant and waste treatment management by strengthening the analyzing capability of fundamental situations. (authors)

  3. On a New Approach to Education about Ethics for Engineers at Meijou University

    Fukaya, Minoru; Morimoto, Tsukasa; Kimura, Noritsugu

    We propose a new approach to education of so called “engineering ethics”. This approach has two important elements in its teaching system. One is “problem-solving learning”, and the other is “discussion ability”. So far, engineering ethics started at the ethical standpoint. But we put the viewpoint of problem-solving learning at the educational base of engineering ethics. Because many problems have complicated structures, so if we want to solve them, we should discuss each other. Problem-solving ability and discussion ability, they help engineers to solve the complex problems in their social everyday life. Therefore, Meijo University names engineering ethics “ethics for engineers”. At Meijou University about 1300 students take classes in both ethics for engineers and environmental ethics for one year.

  4. [Comparison of biomedical engineering education between Southeast University (China) and American universities].

    Wang, Xi; Huang Ningping; Sun Xiao; Gu Ning

    2011-06-01

    Taking Duke University as an example, this article makes a comparison between the major of biomedical engineering in the Southeast University and that in American universities in term of subject direction, faculty, teaching principle and status of publishing academic papers. Through the comparison and analysis, the problems we face were explored. From the comparison and summary the future improvements in four aspects, such as strengthening the interdisciplinary among different majors, etc. so as to provide an inspiration on the future perspectives of research and teaching in biomedical engineering in China.

  5. University teachers' perspectives on the role of the Laplace transform in engineering education

    Holmberg née González Sampayo, Margarita; Bernhard, Jonte

    2017-07-01

    The Laplace transform is an important tool in many branches of engineering, for example, electric and control engineering, but is also regarded as a difficult topic for students to master. We have interviewed 22 university teachers from five universities in three countries (Mexico, Spain and Sweden) about their views on relationships among mathematics, physics and technology/application aspects in the process of learning the Laplace transform in engineering education. Strikingly, the teachers held a spectrum of qualitatively differing views, ranging from seeing virtually no connection (e.g. some thought the Laplace transform has no relevance in engineering), through to regarding the aspects as intimately, almost inseparably linked. The lack of awareness of the widely differing views among teachers might lead to a lack of constructive alignment among different courses that is detrimental to the quality of engineering education.

  6. Educating Maritime Engineers for a Globalised Industry - Bridging the Gap Between Industry and Universities

    Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam

    2012-01-01

    In Denmark, the maritime engineering competences requested by the industry have changed in the past one to two decades. The typical naval architects do no longer find themselves working in the ship-building industry but rather in the industry of ship operators, consultancies, class societies, etc....... This means that universities educating maritime engineers need to reflect the changes in the curricula for their maritime engineering students. Topics and issues regarding this matter have recently been addressed in a survey made in the Danish maritime industry. The survey concludes that the demand...... for maritime engineers in the industry is considerably larger than the output from the technical universities. Moreover, it sets forth a series of recommendations to the industry as well as to the universities to facilitate meeting the demand for maritime engineers in Denmark in the future. The recommendations...

  7. The New Maritime Engineering Education at the Technical University of Denmark

    Jensen, Jørgen Juncher; Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam

    2014-01-01

    maritime engineering education has so far been very successful with the number of students increased by a factor of two and with very good job opportunities in the Danish maritime industry. A spin-off of this change is DTU's participation in a dual MSc degree engineering program: Nordic Master in Maritime......Until 2010, the maritime engineering education at the Technical University of Denmark (DTU) followed the rather classical naval architecture approach with the main focus on marine hydrodynamics and strength of ship structures. The number of students was rather modest and constant. However......, at that time the last major ship yard in Denmark was closing down and ship operation, together with ship design, became the main working area for the students after graduation. It was then decided to broaden the naval architecture education to a maritime engineering education taking marine logistics...

  8. Jackson State University (JSU)’s Center of Excellence in Science, Technology, Engineering, and Mathematics Education (CESTEME)

    2016-01-08

    Actuarial Science Taylor, Triniti Lanier Alcorn State University Animal Science Tchounwou, Hervey Madison Central Jackson State University Computer...for Public Release; Distribution Unlimited Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering...Final Report: Jackson State University (JSU)’s Center of Excellence in Science , Technology, Engineering, and Mathematics Education (CESTEME) Report

  9. Software Engineering Education at Carnegie Mellon University: One University; Programs Taught in Two Places

    Ray Bareiss

    2009-10-01

    Full Text Available Teaching Software Engineering to professional master‟s students is a challenging endeavor, and arguably for the past 20 years, Carnegie Mellon University has been quite successful. Although CMU teaches Software Engineering at sites world-wide and uses different pedagogies, the goal of the curriculum -- to produce world-class software engineers -- remains constant. This paper will discuss two of the most mature versions of Carnegie Mellon‟s Software Engineering program -- the main campus program and its "daughter program" at the Silicon Valley Campus. We discuss the programs with respect to the dimensions of curriculum, how students work and learn, how faculty teach, curricular materials, and how students are assessed to provide insight into how Carnegie Mellon continues to keep its programs fresh, to adapt them to local needs, and to meet its goal of excellence after 20 years.

  10. Embedding of ESD in Engineering Education: Experiences from Chalmers University of Technology

    Svanstrom, Magdalena; Palme, Ulrika; Wedel, Maria Knutson; Carlson, Ola; Nystrom, Thomas; Eden, Michael

    2012-01-01

    Purpose: The purpose of this paper is to report on methods developed, within a three-year Education for Sustainable Development (ESD) project at Chalmers University of Technology in Gothenburg, Sweden, to achieve a higher degree of embedding of ESD in engineering programmes. The major emphasis is on methods used, results achieved and lessons…

  11. Critical Thinking in the University Curriculum--The Impact on Engineering Education

    Ahern, A.; O'Connor, T.; McRuairc, G.; McNamara, M.; O'Donnell, D.

    2012-01-01

    Critical thinking is a graduate attribute that many courses, including engineering courses, claim to produce in students. As a graduate attribute it is seen by academics as a particularly desirable outcome of student learning and is said by researchers to be a defining characteristic of university education. However, how critical thinking is…

  12. Improving Educational Objectives of the Industrial and Management Systems Engineering Programme at Kuwait University

    Aldowaisan, Tariq; Allahverdi, Ali

    2016-01-01

    This paper describes the process of developing programme educational objectives (PEOs) for the Industrial and Management Systems Engineering programme at Kuwait University, and the process of deployment of these PEOs. Input of the four constituents of the programme, faculty, students, alumni, and employers, is incorporated in the development and…

  13. Experience in nuclear engineering distance education at the University of Tennessee

    Dodds, H.L.

    2011-01-01

    This paper describes the distance education programs in nuclear engineering at The University of Tennessee (UT), which includes several courses that are of interest to the mathematics and computation community such as reactor theory and design, shielding, statistics, health physics, and criticality safety. All of the courses needed for the MS degree in nuclear engineering and several of the courses needed for the PhD degree in nuclear engineering are delivered synchronously (i.e., interactive in real time) via the Internet to students located anywhere by instructors located anywhere. The paper will also describe the historical development of distance education programs at UT as well as the benefits of the programs to students and to the university. The oral presentation associated with this paper will include a short movie that demonstrates the technology used for distance delivery. (author)

  14. Education for Sustainable Development: Assessment of the Current Situation at the Faculty of Engineering of Notre Dame University--Louaize

    Salem, Talal; Harb, Jacques

    2012-01-01

    There is a growing need to incorporate educational sustainable development (ESD) principles into engineering education. This paper identifies engineering competencies within the Faculty of Engineering at Notre Dame University--Louaize and the means to shift towards sustainability. ESD tools are used to carry the analysis, keeping in mind the…

  15. Ethics and engineering courses at Delft University of Technology: contents, educational setup and experiences.

    van de Poel, I R; Zandvoort, H; Brumsen, M

    2001-04-01

    This article reports on the development and teaching of compulsory courses on ethics and engineering at Delft University of Technology (DUT). Attention is paid to the teaching goals, the educational setup and methods, the contents of the courses, involvement of staff from engineering schools, experiences to date, and challenges for the future. The choices made with respect to the development and teaching of the courses are placed within the European and Dutch context and are compared and contrasted with the American situation and experiences.

  16. Identifying the Barriers upon Development of Virtual Education in Engineering Majors (Case Study: The University of Isfahan)

    Nikoonezhad, Sepideh; Nili, Mohammadreza; Esfahani, Ahmadreza Nasr

    2015-01-01

    The present study aims at investigating barriers upon development of virtual education in engineering majors at the University of Isfahan. The study has applied a mixed method (qualitative and quantitative) and its population consists all of the department members of the technical and engineering majors at the University of Isfahan including 125…

  17. An Educational Program for Newcomers to Enhance their Engineering Motivation and Creativity in Faculty of Engineering at Shizuoka University

    Azuma, Naoto; Fujima, Nobuhisa; Nakamura, Tamotsu; Yamada, Shinkichi; Makizawa, Hisamitsu; Nakamura, Takato

    In Faculty of Engineering at Shizuoka University, a new one-year educational program of mechatronics for newcomers will start at April in 2006. This program involves three stages designed to enhance their motivation and creativity in engineering. At the first and second stages, there are three activities; practicing digital circuits, controlling robots with Boe-Bot from Parallax Inc., and making their own microcontroller boards. At the third stage, each student cooperates with his team-mates to make a robot loaded his own board and through the game-type of competition the performance of each team-robot is scored. Through this program, we hope that our students enhance their engineering motivation and creativity.

  18. Nuclear Science and Engineering education at the Delft University of Technology

    Bode, P.

    2009-01-01

    There is a national awareness in the Netherlands for strengthening education in the nuclear sciences, because of the ageing workforce, and to ensure competence as acceptability increases of nuclear power as an option for diversification of the energy supply. This may be reflected by the rapidly increasing number of students at the Delft University of Technology with interest in nuclear science oriented courses, and related bachelor and MSc graduation projects. These considerations formed the basis of the Nuclear Science and Engineering concentration, effectively starting in 2009. The programme can be taken as focus of the Research and Development Specialisation within the Master Programme in Applied Physics or as a Specialisation within the Master's Programme in Chemical Engineering. Both programmes require successful completion of a total of 120 ECTS study points, consisting of two academic years of 60 ECTS (1680 hours of study). Of that total, 100 ECTS are in the field of Nuclear Science and Engineering, depending on students choices within the programme, including a (industrial) internship, to be taken in companies all over the world. In Chemical Engineering, there is a compulsory design project during which a product or process should be developed. Both programmes also require a final graduation project. In both curricula, Nuclear Science and Engineering comprises compulsory and elective courses, which allow students to focus on either health or energy. Examples of courses include Nuclear Science, Nuclear Chemistry, Nuclear Engineering, Reactor Physics, Chemistry of the Nuclear Fuel Cycle, Medical Physics and Radiation Technology and Radiological Health Physics. (Author)

  19. Innovation in engineering education through computer assisted learning and virtual university model

    Raicu, A.; Raicu, G.

    2015-11-01

    The paper presents the most important aspects of innovation in Engineering Education using Computer Assisted Learning. The authors propose to increase the quality of Engineering Education programs of study at European standards. The use of computer assisted learning methodologies in all studies is becoming an important resource in Higher Education. We intend to improve the concept of e-Learning using virtual terminals, online support and assisting special training through live seminars and interactive labs to develop a virtual university model. We intend to encourage computer assisted learning and innovation as sources of competitive advantage, to permit vision and learning analysis, identifies new sources of technology and ideas. Our work is based on our university datasets collected during last fifteen years using several e-Learning systems. In Constanta Maritime University (CMU), using eLearning and Knowledge Management Services (KMS) is very important and we apply it effectively to achieve strategic objectives, such as collaboration, sharing and good practice. We have experience in this field since 2000 year using Moodle as KMS in our university. The term KMS can be associated to Open Source Software, Open Standards, Open Protocols and Open Knowledge licenses, initiatives and policies. In CMU Virtual Campus we have today over 12500 active users. Another experience of the authors is the implementation of MariTrainer Wiki educational platform based on Dokeos and DekiWiki under MARICOMP and MEP Leonardo da Vinci Project. We'll also present in this paper a case study under EU funded project POSDRU, where the authors implemented other educational platform in Technological High Schools from Romania used over 1000 teachers. Based on large datasets the study tries to improve the concept of e-Learning teaching using the revolutionary technologies. The new concept present in this paper is that the teaching and learning will be interactive and live. The new and modern

  20. Research-based learning for nuclear engineering education in Gadjah Mada University

    Putero, Susetyo Hario; Kusnanto; Harto, Andang Widi

    2011-01-01

    Nuclear engineering education in Gadjah Mada University has been operated since 1977 in order to prepare Indonesian people facing up nuclear era in Indonesia. Until 1995, most of the alumni work in National Nuclear Energy Board, but recently many of them have been taking advanced study abroad. To improve our quality of education, since the last 3 years Gadjah Mada University has implemented Research-Based Learning (RBL). RBL for nuclear engineering student is conducted by providing challenges to the student related to the critical issues in public acceptance of nuclear power plant (NPP) in Indonesia that is waste management. Students should join in a group to complete the assignment. Within the group, they discuss and produce new idea in order to manage radioactive waste of new generation NPP. So, they are stimulated to think the future based on the state of the art of waste technology. This method could increase student's knowledge and soft skills, simultaneously. Some students also continue to explore and to refine the task as their thesis topic. Therefore, implementation of RBL also succeeds in increasing student's efficiency study. (author)

  1. University Teachers' Perspectives on the Role of the Laplace Transform in Engineering Education

    Holmberg, Margarita; Bernhard, Jonte

    2017-01-01

    The Laplace transform is an important tool in many branches of engineering, for example, electric and control engineering, but is also regarded as a difficult topic for students to master. We have interviewed 22 university teachers from five universities in three countries (Mexico, Spain and Sweden) about their views on relationships among…

  2. Improving the Practical Education of Chemical and Pharmaceutical Engineering Majors in Chinese Universities

    Zhao, Feng-qing; Yu, Yi-feng; Ren, Shao-feng; Liu, Shao-jie; Rong, Xin-yu

    2014-01-01

    Practical education in chemical engineering has drawn increasing attention in recent years. This paper discusses two approaches to teaching and learning about experiments among upper-level chemical and pharmaceutical engineering majors in China. On the basis of years of experience in teaching chemical and pharmaceutical engineering, we propose the…

  3. Obstacles of Search Engines Used by Graduate Students at The Faculty of Education, The Islamic University in Gaza

    Fayez Kamal Shaladan

    2018-03-01

    Full Text Available This study aimed to identify obstacles of search engines used by graduate students at the Faculty of Education, the Islamic University in Gaza, and to overcome them. The researchers utilized the analytical descriptive approach to achieve the goal of the study. They used the interview tool and designed a questionnaire to collect data for the study. The sample of the study was (164 male and female postgraduate students enrolled in the College of Education. The study results were as follows: The degree of obstacles to the use of search engines among postgraduate students at the Faculty of Education at the Islamic University in Gaza was high with a percentage of (%71.05.There were no statistically significant differences between the averages of the study sample for the obstacles of the use of the search engines among the postgraduate students in the Faculty of Education, the Islamic University due to the gender and academic variables, the cumulative average. An exception to this was the third theme which was personal constraints which had differences in favor of students whose cumulative rates were less than (%85. The study concluded with these recommendations: The university should subscribe to various search engines revise admission terms and conditions for postgraduate studies whereby English and computer courses can be included. Keywords: Search engines, Students, Postgraduate studies, Islamic University.

  4. On a Vision to Educating Students in Sustainability and Design—The James Madison University School of Engineering Approach

    Olga Pierrakos

    2011-12-01

    Full Text Available In order for our future engineers to be able to work toward a sustainable future, they must be versed not only in sustainable engineering but also in engineering design. An engineering education must train our future engineers to think flexibly and to be adaptive, as it is unlikely that their future will have them working in one domain. They must, instead, be versatilists. The School of Engineering at James Madison University has been developed from the ground up to provide this engineering training with an emphasis on engineering design, systems thinking, and sustainability. Neither design nor sustainability are mutually exclusive, and consequently, an education focusing on design and sustainability must integrate these topics, teaching students to follow a sustainable design process. This is the goal of the James Madison University School of Engineering. In this paper, we present our approach to curricular integration of design and sustainability as well as the pedagogical approaches used throughout the curriculum. We do not mean to present the School’s model as an all or nothing approach consisting of dependent elements, but instead as a collection of independent approaches, of which one or more may be appropriate at another university.

  5. Active learning in the space engineering education at Technical University of Madrid

    Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

    This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

  6. Survey of Education, Engineering, and Information Technology Students Knowledge of Green Computing in Nigerian University

    Tajudeen Ahmed Shittu

    2016-02-01

    Full Text Available The use of computer system is growing rapidly and there is growing concern on the environmental hazard associated with its use. Thus, the need for every user’s to possess the knowledge of using computer in an environmental friendly manner.  This study therefore, investigated the knowledge of green computing possessed by university students in Nigeria. To achieve this, survey method was employed to carry out the study. The study involved students from three schools (Computer Science, Engineering, and Education. Purposive sampling method was used to draw three hundred (300 respondents that volunteer to answer the questionnaire administered for gathering the data of the study. The instrument used was adapted but modify and subjected to pilot testing to ascertain its validity and internal consistency. The reliability of the instrument showed a .75 Cronbach alpha level.  The first research question was answer with descriptive statistic (perecentage.  T-test and ANOVA was used to answer question two and three. The findings showed that the students do not possess adequate knowledge on conscious use of computing system. Also, the study showed that there is no significant difference in the green computing knowledge possesses among male and female as well as among student from the three schools. Based on these findings, the study suggested among other an aggressive campaign on green computing among university communities.

  7. Research reactor usage at the Idaho National Engineering Laboratory in support of university research and education

    Woodall, D.M.; Dolan, T.J.; Stephens, A.G.

    1990-01-01

    The Idaho National Engineering Laboratory is a US Department of Energy laboratory which has a substantial history of research and development in nuclear reactor technologies. There are a number of available nuclear reactor facilities which have been incorporated into the research and training needs of university nuclear engineering programs. This paper addresses the utilization of the Advanced Reactivity Measurement Facility (ARMF) and the Coupled Fast Reactivity Measurement Facility (CFRMF) for thesis and dissertation research in the PhD program in Nuclear Science and Engineering by the University of Idaho and Idaho State University. Other reactors at the INEL are also being used by various members of the academic community for thesis and dissertation research, as well as for research to advance the state of knowledge in innovative nuclear technologies, with the EBR-II facility playing an essential role in liquid metal breeder reactor research. 3 refs

  8. Project Based Learning experiences in the space engineering education at Technical University of Madrid

    Rodríguez, Jacobo; Laverón-Simavilla, Ana; del Cura, Juan M.; Ezquerro, José M.; Lapuerta, Victoria; Cordero-Gracia, Marta

    2015-10-01

    This work describes the innovation activities performed in the field of space education since the academic year 2009/10 at the Technical University of Madrid (UPM), in collaboration with the Spanish User Support and Operations Center (E-USOC), the center assigned by the European Space Agency (ESA) in Spain to support the operations of scientific experiments on board the International Space Station. These activities have been integrated within the last year of the UPM Aerospace Engineering degree. A laboratory has been created, where students have to validate and integrate the subsystems of a microsatellite using demonstrator satellites. In parallel, the students participate in a Project Based Learning (PBL) training process in which they work in groups to develop the conceptual design of a space mission. One student in each group takes the role of project manager, another one is responsible for the mission design and the rest are each responsible for the design of one of the satellite subsystems. A ground station has also been set up with the help of students developing their final thesis, which will allow future students to perform training sessions and learn how to communicate with satellites, how to receive telemetry and how to process the data. Several surveys have been conducted along two academic years to evaluate the impact of these techniques in engineering learning. The surveys evaluate the acquisition of specific and generic competences, as well as the students' degree of satisfaction with respect to the use of these learning methodologies. The results of the surveys and the perception of the lecturers show that PBL encourages students' motivation and improves their results. They not only acquire better technical training, but also improve their transversal skills. It is also pointed out that this methodology requires more dedication from lecturers than traditional methods.

  9. National research council report and its impact on nuclear engineering education at the University of Michigan

    Martin, W.R.

    1991-01-01

    A recent report by the National Research Council raised a number of important issues that will have an impact on nuclear engineering departments across the country. The report has been reviewed in the context of its relevance to the Department of Nuclear Engineering at the University of Michigan (UM), and some observations and conclusions have been drawn. This paper focuses on those portions of Ref. 1 concerning undergraduate and graduate curricula, research facilities and laboratories, faculty research interests, and funding for research and graduate student support because these topics have a direct impact on current and future directions for the department

  10. Educating the humanitarian engineer.

    Passino, Kevin M

    2009-12-01

    The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

  11. About opportunity and advantages of adaptation the system of education of experts on atomic engineering specialty in Odessa Polytechnic University to the European system of education

    Mazurenko, A.

    2004-01-01

    Education of experts for atomic engineering in Odessa Polytechnic University is conducted for almost thirty years and has developed traditions. Approaching of education systems of experts of Ukraine and Europe inevitably in the modern integrated world including nuclear engineering. Thus it is necessary to take into account experience of progressive World and European countries and Eastern Europe countries - Russia and Ukraine. Creation of All-European Methodical Center for coordination of education of experts for Nuclear industry with the main functions - coordinating, supervising and consulting is expedient. (author)

  12. Integrating Internet into Engineering Education: A Case Study of Students' Usage and Attitudes in Faculty of Engineering, Ahmadu Bello University

    F.O. Anafi

    2015-12-01

    Full Text Available The attitude of students towards the integration of the internet as a study tool and communication channel in teaching and learning in engineering has been investigated. A study was carried out in the Faculty of Engineering, Ahmadu Bello University Zaria, Nigeria, aimed at investigating the effect of certain variables such as gender, course of study, computer experience, and the percentage of internet usage on teaching and learning processes. A well-structured questionnaire was administered to a randomly selected five hundred (500 male and female students across the seven (7 departments of the faculty and about 85% were filled and returned. The study also examines the university management's perspectives and strategies to incorporate internet usage in teaching and learning processes especially in engineering. Amazingly, responses received showed that experience in the use of the computer in surfing the internet for problem based activities mainly affects the level of internet usage across the faculty. This factor makes some students to misplace their priority in internet usage emphasizing on e-mail correspondence and social networking rather than sourcing for information and solving problems as it is done by a few students. Furthermore, findings support that internet cannot entirely substitute for traditional teaching and learning processes like text reading but can serve as a reasonable alternative when the latter is unavailable

  13. Mechatronics Engineering Education

    Grimheden, Martin

    2006-01-01

    Since its emergence in the late 1960s, mechatronics has become well-established as an academic subject, and is now researched and taught at a large number of universities worldwide. The most widely-used definition of the subject today is centered on the synergistic integration of mechanical engineering, electronics, and intelligent computer control. The aim of this thesis is to work between the disciplines of engineering education and mechatronics to address both the question of the identity ...

  14. Integrating design and communication in engineering education: a collaboration between Northwestern University and the Rehabilitation Institute of Chicago.

    Hirsch, Penny L; Yarnoff, Charles

    2011-01-01

    The required course for freshmen in Northwestern University's engineering school - a 2-quarter sequence called Engineering Design and Communication (EDC) - is noteworthy not only for its project-based focus on user-centered design, but also for its innovative integrated approach to teaching communication, teamwork, and ethics. Thanks to the collaboration between EDC faculty and staff at the Rehabilitation Institute of Chicago, EDC students, at the beginning of their education, experience the excitement of solving problems for real clients and users. At the same time, these authentic design projects offer an ideal setting for teaching students how to communicate effectively to different audiences and perform productively as team members and future leaders in engineering.

  15. Innovations in nuclear engineering distance education at the University of Tennessee

    Miller, L.; Pevey, R.; Hines, W.; Townsend, L.; Upadhyaya, B.; Groer, P.; Grossbeck, M.; Dodds, H.

    2006-01-01

    The Univ. of Tennessee Dept. of Nuclear Engineering (UTNE) offers both graduate and undergraduate internet-based courses that support a Master of Science (MS) degree and several certificate programs. In particular a MS degree can be conveniently obtained through distance classes. In addition certificates in Nuclear Criticality Safety and in Maintenance and Reliability can be obtained by completing a subset of courses offered for the MS degree. Students enrolled in these courses are predominately located in East Tennessee, but many live throughout the United States and in several foreign countries. An innovation of significant benefit to the UTNE undergraduate program is the implementation of reactor and laboratory experiments that are conducted over the Internet on the PULSTAR reactor at North Carolina State Univ. (NCSU). These experiments are conducted live with video, audio, and data transmission, and to date experiments involving approach to critical, rod calibration using incremental and inverse kinetics methods, thermal calibration of neutron detectors, and reactivity coefficients have been conducted. Neutron scattering experiments are planned for remote control by students. The use of internet-based education has enhanced the undergraduate program at the UTNE, and it has created opportunities for students with Internet access to obtain a quality education in Nuclear Engineering. (authors)

  16. Education of 'nuclear' students (BSc and MSc curricula) at the Faculty of Nuclear Science and Physical Engineering, Czech Technical University in Prague

    Matejka, K.; Zeman, J.

    2003-01-01

    The Faculty of Nuclear Science and Physical Engineering, Czech Technical University in Prague has been educating nuclear power engineering experts for nearly half a century. The article describes the current status and prospects of education of new specialists at the faculty for all nuclear power-related areas within the MSc and BSc level curricula. The current transition to 'European type' structured education, enabling students who have graduated from the BSc programme to continue smoothly their MSc programme, is outlined. The major courses of the 'Nuclear Engineering' educational specialisation, focused on nuclear power, environment, and dosimetry, are highlighted, including the number of lessons taught in each study year. (author)

  17. Environmental engineering education enhancement

    Caporali, E.

    2012-04-01

    Since higher education plays a central role in the development of both human beings and modern societies, enhancing social, cultural and economic development, active citizenship, ethical values and expertises for a sustainable growth, environment respectful, the European Commission promotes a wide range of programmes. Among the EC programmes, the TEMPUS - Trans European Mobility Programme for University Studies, with the support of the DG EAC of the European Commission, has contributed to many aspects of general interest for higher education. Curricula harmonization, LifeLong Learning Programme development, ICT use, quality assessment, accreditation, innovation learning methods, growth of networks of institutions trusting each other, are the focused aspects. Such a solid cooperation framework is surely among the main outcomes of the TEMPUS Projects leaded by the University of Firenze UNIFI (Italy), DEREC - Development of Environment and Resources Engineering Curriculum (2005-2008), and its spin-off DEREL - Development of Environment and Resources Engineering Learning (2010-2013), and VICES - Videoconferencing Educational Services (2009-2012). DEREC and DEREL TEMPUS projects, through the co-operation of Universities in Italy, Austria, Germany, Greece, Macedonia, Albania and Serbia, are aimed at the development of first and second level curricula in "Environment and Resources Engineering" at the Ss. Cyril and Methodius University - UKIM Skopje (MK). In the DEREC Project the conditions for offering a joint degree title in the field of Environmental Engineering between UNIFI and UKIM Skopje were fulfilled and a shared educational programme leading to the mutual recognition of degree titles was defined. The DEREL project, as logical continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second level curriculum in Environment and Resources Engineering at UKIM Skopje, University of Novi Sad (RS) and Polytechnic University of Tirana (AL). following

  18. Participant outcomes, perceptions, and experiences in the Internationally Educated Engineers Qualification Program, University of Manitoba: An exploratory study

    Friesen, Marcia R.

    Immigration, economic, and regulatory trends in Canada have challenged all professions to examine the processes by which immigrant professionals (international graduates) achieve professional licensure and meaningful employment in Canada. The Internationally Educated Engineers Qualification Program (IEEQ) at the University of Manitoba was developed as an alternate pathway to integrate international engineering graduates into the engineering profession in Manitoba. However, universities have the neither mandate nor the historical practice to facilitate licensure for immigrant professionals and, thus, the knowledge base for program development and delivery is predominantly experiential. This study was developed to address the void in the knowledge base and support the program's ongoing development by conducting a critical, exploratory, participant-oriented evaluation of the IEEQ Program for both formative and summative purposes. The research questions focussed on how the IEEQ participants perceived and described their experiences in the IEEQ Program, and how the participants' outcomes in the IEEQ Program compared to international engineering graduates pursuing other licensing pathways. The study was built on an interpretivist theoretical approach that supported a primarily qualitative methodology with selected quantitative elements. Data collection was grounded in focus group interviews, written questionnaires, student reports, and program records for data collection, with inductive data analysis for qualitative data and descriptive statistics for quantitative data. The findings yielded rich understandings of participants' experiences in the IEEQ Program, their outcomes relative to international engineering graduates (IEGs) pursuing other licensing pathways, and their perceptions of their own adaptation to the Canadian engineering profession. Specifically, the study suggests that foreign credentials recognition processes have tended to focus on the recognition and

  19. Behavior of Engineering Students in Kuwait University

    M. A. Al-Ajmi; R. S. Al-Kandari

    2015-01-01

    This initial study is concerned with the behavior of engineering students in Kuwait University which became a concern due to the global issues of education in all levels. A survey has been conducted to identify academic and societal issues affecting the engineering student performance. The study is drawing major conclusions with regard to private tutoring and the online availability of textbooks’ solution manuals.

  20. Nuclear education in Japanese universities

    Yamamuro, Nobuhiro

    1981-01-01

    In 1957, the graduate courses for nuclear engineering were established in Kyoto University, Osaka University and the Tokyo Institute of Technology. Since then, the expansion of nuclear education has kept pace with the growth of the nuclear industry in Japan. The nuclear education in universities in more than 20 years can be roughly divided into three periods. In the first period from 1955 to 1965, nuclear education began at undergraduate level, and the facilities required for the research and education were set up. The imported reactor began the commercial operation in 1966 for the first time, and during the period of high economic growth, the request by the nuclear industry was met by providing special studies in addition to the regular curriculum studies. The research committee on nuclear engineering education was formed, and in 1973, Japan-U.S. cooperative seminar on education program for nuclear engineering was held. The first ''oil crisis'' occurred in 1973, and the significance of nuclear power as an alternative to oil increased. But as nuclear power plants became bigger and increased, the safety and the effect on environment have been discussed. Also the research and development of nuclear fusion have been promoted. All these factors were reflected to the nuclear education in universities. The carricula in universities and the tasks and prospects in nuclear engineering education are described. (Kako, I.)

  1. Engineering Education: Challenges for Innovation

    Restivo, Teresa; Alves, Gustavo R.

    2014-01-01

    Engineering Education: Challenges for Innovation” is the scope of the 1st International Conference of the Portuguese Society for Engineering Education (in Portuguese: Sociedade Portuguesa para a Educação em Engenharia, SPEE) [1]. SPEE is a young society now completing four years since its public presentation and launching by the Faculty of Engineering of University of Porto, in February 19, 2010. info:eu-repo/semantics/publishedVersion

  2. Biomedical engineering education through global engineering teams.

    Scheffer, C; Blanckenberg, M; Garth-Davis, B; Eisenberg, M

    2012-01-01

    Most industrial projects require a team of engineers from a variety of disciplines. The team members are often culturally diverse and geographically dispersed. Many students do not acquire sufficient skills from typical university courses to function efficiently in such an environment. The Global Engineering Teams (GET) programme was designed to prepare students such a scenario in industry. This paper discusses five biomedical engineering themed projects completed by GET students. The benefits and success of the programme in educating students in the field of biomedical engineering are discussed.

  3. enhancing employability through university education

    PROF EKWUEME

    engineered to achieve these skills for the benefit of our students and society at large through the role of. National ... S. O. Onyeagbako, Department of Life Science Education, Faculty of Education, Imo State University, ... examination malpractice and unmotivated work ..... functions are met, NUC should ensure an orderly.

  4. Effectiveness of mathematics education in secondary schools to meet the local universities missions in producing quality engineering and science undergraduates

    Bakar Hasan, Abu; Fatah Abdul, Abdul; Selamat, Zalilah

    2018-01-01

    Critical claims by certain quarters that our local undergraduates are not performing well in Mathematics, Statistics and Numerical Methods needs a serious thinking and actions. Yearly examinations results from the Sijil Pelajaran Malaysia (SPM equivalent to A-Level) and Sijil Tinggi Pelajaran Malaysia (STPM equivalent to O-Level) levels have been splendid whereby it is either increasing or decreasing in a very tight range. A good foundation in mathematics and additional mathematics will tremendously benefit these students when they enter their university education especially in engineering and science courses. This paper uses SPM results as the primary data, questionnaires as secondary, and apply the Fish Bones technique for analysis. The outcome shows that there is a clear correlation between the causes and effect.

  5. Industrial Education. "Small Engines".

    Parma City School District, OH.

    Part of a series of curriculum guides dealing with industrial education in junior high schools, this guide provides the student with information and manipulative experiences on small gasoline engines. Included are sections on shop adjustment, safety, small engines, internal combustion, engine construction, four stroke engines, two stroke engines,…

  6. Launching partnership in optics and photonics education between University of Rochester and Moscow Engineering Physics Institute NRNU MEPhI

    Lukishova, Svetlana G.; Zavestovskaya, Irina N.; Zhang, Xi-Cheng; Aleshchenko, Yury A.; Konov, Vitaly I.

    2017-08-01

    A collaboration in education between the oldest and one of the most comprehensive Optics schools in U.S., the Institute of Optics (IO), University of Rochester (UR), and one of the most recognized Russian university, National Research Nuclear University MEPhI (Moscow Engineering Physics Institute) was started in 2015 by signing an agreement on a double-Master's degree program in optics. It was based on earlier collaboration between research groups in both universities. In summer of 2016, nine UR Optics undergraduate students participated with MEPhI students at the International School on Optics and Laser Physics in MEPhI. During five days they were immersed into the world of cutting edge research, technologies and ideas that Russian, European and U.S. scientists offered them. This School also included tours of MEPhI Nanotechnologies and Lasers Centers and Nano-bioengineering Laboratory as well as of scientific laboratories of the leading institutes in optics, photonics and laser physics of the Russian Academy of Sciences. In December of 2015, one MEPhI Master student visited IO UR for one month for a research project with results presented later at a MEPhI conference. Samples prepared by MEPhI researchers are used in IO students teaching laboratories. One Master student from MEPhI is working now towards the Master's degree at the IO UR. In this paper benefits and pitfalls of a cross-border collaboration are discussed as well as different directions of such a collaboration to provide a high-quality specialization for the students of the 21 century which includes international cooperation.

  7. Alternative Assessment in Engineering Language Education: The Case of the Technical University of Madrid

    Pierce, Joana; Duran, Pilar; Ubeda, Paloma

    2011-01-01

    Engineering institutions across Europe are currently involved in a major process of reform and restructuring as a part of the Bologna Process, which stresses the role of competencies and outcomes in curriculum design. In the field of languages, the Council of Europe has developed the CEFR (Common European Framework of References) for languages,…

  8. A Survey of the Role of Thermodynamics and Transport Properties in Chemical Engineering University Education in Europe and the USA

    Ahlstrom, Peter; Aim, Karel; Dohrn, Ralf; Elliott, J. Richard; Jackson, George; Jaubert, Jean-Noel; Macedo, Eugenia A.; Pokki, Juha-Pekka; Reczey, Kati; Victorov, Alexey; Zilnik, Ljudmila Fele; Economou, Ioannis G.

    2010-01-01

    A survey on the teaching of thermodynamics and transport phenomena in chemical engineering curricula in European and US Universities was performed and results are presented here. Overall, 136 universities and colleges responded to the survey, out of which 81 from Europe and 55 from the USA. In most of the institutions responding at least two…

  9. Industrial relations in engineering education

    Kjærsdam, Finn

    2005-01-01

    gained from Aalborg University, Aalborg, Denmark, shows the strength of this type of combination. It produces creative engineers who are prepared to tackle unknown problems of the future using theories from very different disciplines and has proven to be a very effective educational method. More students...... pass their education. in due time, while project work supports the social environment on campus....

  10. Academic Ethics in Turkish Universities: Perceptions of Academicians from Engineering, Medicine and Education Colleges

    Aydin, Inayet; Demirkasimoglu, Nihan; Alkin, Senar

    2012-01-01

    Problem Statement: Academicians such as scientists contribute to the research of knowledge, to the free disclosure of knowledge, to students' training, and to public service with their special knowledge and skills. Academicians' ethical responsibilities and values a very important place in the development of universities' functions, which, in…

  11. Modern Engineering : Science and Education

    2016-01-01

    This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in 2014 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

  12. Implementing a Systematic Process for Rapidly Embedding Sustainability within Chemical Engineering Education: A Case Study of James Cook University, Australia

    Sheehan, Madoc; Schneider, Phil; Desha, Cheryl

    2012-01-01

    Sustainability has emerged as a primary context for engineering education in the 21st Century, particularly the sub-discipline of chemical engineering. However, there is confusion over how to go about integrating sustainability knowledge and skills systemically within bachelor degrees. This paper addresses this challenge, using a case study of an…

  13. Engineering Education and Management - vol.2

    Zhang, Chunliang; International Conference on Engineering Education and Management (ICEEM2011)

    2012-01-01

    This is the proceedings of the selected papers presented at 2011 International Conference on Engineering Education and Management (ICEEM2011) held in Guangzhou, China, during November 18-20, 2011. ICEEM2011 is one of the most important conferences in the field of Engineering Education and Management and is co-organized by Guangzhou University, The University of New South Wales, Zhejiang University and Xi’an Jiaotong University. The conference aims to provide a high-level international forum for scientists, engineers, and students to present their new advances and research results in the field of Engineering Education and Management. This volume comprises 122 papers selected from over 400 papers originally submitted by universities and industrial concerns all over the world. The papers specifically cover the topics of Management Science and Engineering, Engineering Education and Training, Project/Engineering Management, and Other related topics. All of the papers were peer-reviewed by selected experts. The p...

  14. Forming engineers' sociocultural competence: Engineering ethics at tomsk polytechnic university

    Galanina, E.; Dulzon, A.; Schwab, A.

    2015-10-01

    The aim of the present research is to discuss Tomsk Polytechnic University in respect of forming engineers’ sociocultural competence and teaching engineering ethics. Today international standards of training engineers cover efficient communication skills, ability to understand societal and environment context, professional and ethical responsibility. This article deals with the problem of contradiction between the need to form engineers’ sociocultural competence in Russian higher education institutions in order to meet the requirements of international accreditation organizations and the real capabilities of existing engineering curricula. We have described ethics teaching experience of TPU, studied the engineering master programs of TPU to see how the planned results are achieved. We have also given our recommendations to alter the structure of TPU educational curricula, which can also be applied in other higher education institutions.

  15. The Role of Computer-Based Educational Laboratories in Nuclear Engineering University Programmes

    Korolev, S.A.; Kosilov, A.N.; Chernov, E.V.; Vygovskiy, S.B.

    2014-01-01

    The specialized Educational and research laboratory 'Reactor physics, control and safe operation of WWER type NPP’ is based on the computer simulator of WWER -1000 and offers the real-time monitoring of data available to the WWER -1000 NPP control room operators, and provides a possibility to investigate reactor behavior in normal and abnormal situations. The laboratory supports interactive technologies and team-based activities that enable students to build their knowledge through required gateway courses and explore problems relevant to real life situations

  16. teaching and learning methodologies in engineering education

    Global Journal

    and learning of engineering in Nigerian Universities and suggests ways of improving engineering education in ... and inadequate collaboration between industries and schools. .... can book at their convenient time without conflicting with their ...

  17. Aerospace engineering educational program

    Craft, William; Klett, David; Lai, Steven

    1992-01-01

    The principle goal of the educational component of NASA CORE is the creation of aerospace engineering options in the mechanical engineering program at both the undergraduate and graduate levels. To accomplish this goal, a concerted effort during the past year has resulted in detailed plans for the initiation of aerospace options in both the BSME and MSME programs in the fall of 1993. All proposed new courses and the BSME aerospace option curriculum must undergo a lengthy approval process involving two cirriculum oversight committees (School of Engineering and University level) and three levels of general faculty approval. Assuming approval is obtained from all levels, the options will officially take effect in Fall '93. In anticipation of this, certain courses in the proposed curriculum are being offered during the current academic year under special topics headings so that current junior level students may graduate in May '94 under the BSME aerospace option. The proposed undergraduate aerospace option curriculum (along with the regular mechanical engineering curriculum for reference) is attached at the end of this report, and course outlines for the new courses are included in the appendix.

  18. Culture in Engineering Education

    Hoffmann, Birgitte; Jørgensen, Ulrik; Christensen, Hans Peter

    2011-01-01

    As engineers today often work in intercultural projects and contexts, intercultural competences must be part of the learning objectives in engineering educations. Cultural aspects of engineering education should not just be treated as a question of appropriate communication and teaching: cultural...... aspects are basically part of engineering discipli¬nes, work challenges as well as the contextual elements in engineering curriculum [1,2]. This is reflected in the aims of the CDIO programme [3,4]; however, the programme, as well as the teaching practises, undoubtedly needs to further develop approaches...... to cultural aspects in engineering education. Hence the key-question of this paper is how CDIO support the development of intercultural competences in engineering education. The paper explores the implementation of CDIO in an intercultural arctic engineering programme in Greenland that since 2001 has been...

  19. Promoting convergence: The integrated graduate program in physical and engineering biology at Yale University, a new model for graduate education.

    Noble, Dorottya B; Mochrie, Simon G J; O'Hern, Corey S; Pollard, Thomas D; Regan, Lynne

    2016-11-12

    In 2008, we established the Integrated Graduate Program in Physical and Engineering Biology (IGPPEB) at Yale University. Our goal was to create a comprehensive graduate program to train a new generation of scientists who possess a sophisticated understanding of biology and who are capable of applying physical and quantitative methodologies to solve biological problems. Here we describe the framework of the training program, report on its effectiveness, and also share the insights we gained during its development and implementation. The program features co-teaching by faculty with complementary specializations, student peer learning, and novel hands-on courses that facilitate the seamless blending of interdisciplinary research and teaching. It also incorporates enrichment activities to improve communication skills, engage students in science outreach, and foster a cohesive program cohort, all of which promote the development of transferable skills applicable in a variety of careers. The curriculum of the graduate program is integrated with the curricular requirements of several Ph.D.-granting home programs in the physical, engineering, and biological sciences. Moreover, the wide-ranging recruiting activities of the IGPPEB serve to enhance the quality and diversity of students entering graduate school at Yale. We also discuss some of the challenges we encountered in establishing and optimizing the program, and describe the institution-level changes that were catalyzed by the introduction of the new graduate program. The goal of this article is to serve as both an inspiration and as a practical "how to" manual for those who seek to establish similar programs at their own institutions. © 2016 by The International Union of Biochemistry and Molecular Biology, 44(6):537-549, 2016. © 2016 The Authors Biochemistry and Molecular Biology Education published by Wiley Periodicals, Inc. on behalf of International Union of Biochemistry and Molecular Biology.

  20. Development and Experimental Study of Education Through the Synergetic Training for the Engineering Enhanced Medicine “ESTEEM” in Tohoku University

    Yamano, Masahiro; Matsuki, Noriaki; Numayama, Keiko; Takeda, Motohiro; Hayasaka, Tomoaki; Ishikawa, Takuji; Yamaguchi, Takami

    We developed new bio-medical engineering curriculum for industrial engineers, and we confirmed that the engineer's needs and the educative effects by holding a trail program. This study in Tohoku University was supported by the Ministry of Economy, Trade and Industry (METI) . We named the curriculum as “ESTEEM” which is acronym of project title “Education through the Synergetic Training for the Engineering Enhanced Medicine” . In Tohoku University, the “REDEEM” curriculum which is an entry level course of bio-medical engineering for engineers has been already held. The positioning of “ESTEEM” program is an advanced course to enhance knowledge and experience in clinical point of view. The program is consisted of the problem based learning (PBL) style lectures, practical training, and observation learning in hospital. It is a unique opportunity to have instruction by doctors, from diagnosis to surgical operation, from traditional technique to front-line medical equipment. In this paper, we report and discuss on the progress of the new bio-medical engineering curriculum.

  1. A new educational program on biomedical engineering

    van Alste, Jan A.

    2000-01-01

    At the University of Twente together with the Free University of Amsterdam a new educational program on Biomedical Engineering will be developed. The academic program with a five-year duration will start in September 2001. After a general, broad education in Biomedical Engineering in the first three

  2. Knowledge Expansion in Engineering Education: Engineering Technology as an Alternative

    Kamsiah Mohd Ismail

    2015-07-01

    Full Text Available Abstract. The current and rising challenges in engineering education demand graduate engineers who are well-prepared to provide innovative solutions as technical specialists, system integrators and change agents. Realizing the importance of producing a highly competent manpower, the Malaysian Government has put considerable pressure to the universities to produce engineers who are competitive in the global market. Hence, this assignment of developing a highly competence engineering technologist workforce in support of the government policy highlights issues pertaining to the development and offering of practical-oriented programs as a knowledge expansion in engineering education at universities as envisioned by the Malaysian Government.  This paper evaluates the current scenario and examines the application-oriented programs of engineering technology education as practice in local institutions in Malaysia in comparisons to some universities abroad. It also investigates the challenges faced by university management in dealing with issues concerning national quality assurance and accreditation pertaining to the engineering technology education programs. Specifically, it analyzes the faculty planning of pedagogies in term of hands-on skills in teaching and learning. A key conclusion of this research is that Malaysian universities need to evaluate its engineering technology education strategies if they aim for quality assurance and accreditation to be established and aspire for successful attempts towards the creation of the requisite knowledge workers that Malaysia needs.Keywords: application-oriented, engineering education, engineering technology, hands-on skills, knowledge expansion 

  3. Education and training of experts for the nuclear power sector at the Faculty of Electrical Engineering and Information Technologies, Slovak University of Technology in Bratislava

    Lipka, J.; Slugen, V.; Miglierini, M.; Necas, V.; Hascik, J.; Pavlovic, M.

    2003-01-01

    The Faculty of Electrical Engineering and Information Technologies, Slovak University of Technology in Bratislava has been training experts for the nuclear sector for over 40 years now. Current status and trends in nuclear education within the faculty's educational system, encompassing BSc, MSc and PhD studies, are highlighted. Dedicated training courses in the safety aspects of operation of the nuclear power installations are also organized for NPP staff. Periodical training is also provided to supervising physicists at the Jaslovske Bohunice and Mochovce nuclear power plants. Major international projects aimed at nuclear knowledge management and preservation are highlighted and the ENEN - European Nuclear Education Network project is described. (P.A.)

  4. Embedded engineering education

    Kaštelan, Ivan; Temerinac, Miodrag; Barak, Moshe; Sruk, Vlado

    2016-01-01

    This book focuses on the outcome of the European research project “FP7-ICT-2011-8 / 317882: Embedded Engineering Learning Platform” E2LP. Additionally, some experiences and researches outside this project have been included. This book provides information about the achieved results of the E2LP project as well as some broader views about the embedded engineering education. It captures project results and applications, methodologies, and evaluations. It leads to the history of computer architectures, brings a touch of the future in education tools and provides a valuable resource for anyone interested in embedded engineering education concepts, experiences and material. The book contents 12 original contributions and will open a broader discussion about the necessary knowledge and appropriate learning methods for the new profile of embedded engineers. As a result, the proposed Embedded Computer Engineering Learning Platform will help to educate a sufficient number of future engineers in Europe, capable of d...

  5. Mechanical engineering education

    Davim, J Paulo

    2012-01-01

    Mechanical Engineering is defined nowadays as a discipline "which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems". Recently, mechanical engineering has also focused on some cutting-edge subjects such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, as well as aspects related to sustainable mechanical engineering.This book covers mechanical engineering higher education with a particular emphasis on quality assurance and the improvement of academic

  6. CUEPRA-Clemson University electric power research association: An industry/university partnership for excellence in power engineering education and research

    Girgis, A.A.; Makram, E.B.; Cline, M.L.; Fortson, H.S.

    1993-01-01

    A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. This paper presents the power industries involvement in the power program at Clemson University and the strategic improvements that have been accomplished in research and education

  7. Aerospace engineering training: universities experience

    Mertins Kseniya

    2016-01-01

    Full Text Available Contemporary professional working in aerospace engineering must have a set of soft and hard skills. The experience gained in universities shows that training of a competent professional is impossible without an employer involved in this process. The paper provides an analysis of missions, tasks and experience of aerospace professionals and identifies the present and future roles, missions and required skills of a highly qualified specialist in aerospace engineering. This analysis can be used to design a master’s program aiming at providing students with the required knowledge, know-how and attitudes needed to succeed as professionals in industrial companies.

  8. Education in nuclear engineering in Slovakia

    Slugen, V.

    2005-01-01

    Slovak University of Technology is the largest and also the oldest university of technology in Slovakia. Surely more than 50% of high-educated technicians who work nowadays in nuclear industry have graduated from this university. The Department of Nuclear Physics and Technology of the Faculty of Electrical Engineering and Information Technology as a one of seven faculties of this University feels responsibility for proper engineering education and training for Slovak NPP operating staff. The education process is realised via undergraduate (Bc.), graduate (MSc.) and postgraduate (PhD..) study as well as via specialised training courses in a frame of continuous education system. (author)

  9. The University of Utah Nuclear Engineering Program

    Jevremovic, T.; McDonald, L. IV; Schow, R.

    2016-01-01

    As of 2014, the University of Utah Nuclear Engineering Program (UNEP) manages and maintains over 7,000 ft 2 (~650 m 2 ) nuclear engineering facilities that includes 100 kW TRIGA Mark I and numerous laboratories such as radiochemistry, microscopy, nuclear forensics, nuclear medicine, radiation detection and instrumentation laboratories. The UNEP offers prestigious educational and training programs in the field of faculty reserach: reactor physics, reactor design and operation, advanced numerical modeling and visualizations in radiation transport, radiochemistry, nuclear forensics, radiation detection and detector designs, signal processing, nuclear medicine, nuclear space and nuclear robotic’s engineering and radiological sciences. With the state-of-the-art nuclear instrumentation and state-of-the-art numerical modeling tools, reserach reactor and modernized educational and training programs, we positioned ourselves in the last five years as the fastest growing national nuclear engineering program attracting the students from many disciplines such as but not limited to: chemical engineering, civil engineering, environmental engineering, chemistry, physics, astronomy, medical sciences, and others. From 2012, we uniquely developed and implemented the nuclear power plants’ safety culture paradigm that we use for day-to-day operation, management and maintenance of our facilities, as well as train all our students at undergraduate and graduate levels of studies. We developed also a new distance-learning approaches in sharing knowledge about experiential learning based on no-cost internet-tools combined with the use of mobile technologies. (author)

  10. Implementing Sustainable Engineering Education through POPBL

    Lioe, D X; Subhashini, G K

    2013-01-01

    This paper presents the implementation of sustainable engineering education to undergraduate student in Asia Pacific University of Technology and Innovation, Malaysia (APU) through Project-Oriented Problem Based Learning (POPBL). Sustainable engineering has already been the paramount term where it is no longer limited to environment, but also to the entire lifetime of the individual engineer. To inculcate every engineering individual with sustainability, education is the way to start off.

  11. Good practices for educational software engineering projects

    van der Duim, Louwarnoud; Andersson, Jesper; Sinnema, Marco

    2007-01-01

    Recent publications indicate the importance of software engineering in the computer science curriculum. In this paper, we present the final part of software engineering education at University of Groningen in the Netherlands and Vaxjo University in Sweden, where student teams perform an industrial

  12. Advanced Technology for Engineering Education

    Noor, Ahmed K. (Compiler); Malone, John B. (Compiler)

    1998-01-01

    This document contains the proceedings of the Workshop on Advanced Technology for Engineering Education, held at the Peninsula Graduate Engineering Center, Hampton, Virginia, February 24-25, 1998. The workshop was jointly sponsored by the University of Virginia's Center for Advanced Computational Technology and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to assess the status of advanced technologies for engineering education and to explore the possibility of forming a consortium of interested individuals/universities for curriculum reform and development using advanced technologies. The presentations covered novel delivery systems and several implementations of new technologies for engineering education. Certain materials and products are identified in this publication in order to specify adequately the materials and products that were investigated in the research effort. In no case does such identification imply recommendation or endorsement of products by NASA, nor does it imply that the materials and products are the only ones or the best ones available for this purpose. In many cases equivalent materials and products are available and would probably produce equivalent results.

  13. Interdisciplinary Approach in Engineering Education

    Anda Zeidmane

    2011-04-01

    Full Text Available The analysis of the scientific literature available on the types of general competences and their classification caused the authors to conclude that it is necessary to implement interdisciplinary approach in engineering education to develop competences necessary for engineers to make them competitive in the labour market. The attention should be paid to a professional foreign language, computer literacy and educational psychology recommendations. To improve professional foreign language skills, CLIL (Content and Language Integrated Learning method should be integrated in the study process of engineering education. In order to develop information literacy competence, it is important to create a single e-study environment. The academic staff, developing study subjects for engineering programmes, should focus on the study content and study methods. As regards the content, the compromise should be sought between fundamental acquisition of the knowledge of the subject matter, the know-how of the application of this knowledge as well as the use of brand new software in the calculations. The paper presents the examples of the application of the interdisciplinary approach in the universities, where the authors of the paper are affiliated: the LUA (Latvia University of Agriculture and the RTU (Riga Technical University, respectively.

  14. Some developing concepts of engineering education

    Perkins, C. D.

    1975-01-01

    An analysis of the circumstances which have created a shortage of aeronautical engineering undergraduate students in the universities is presented. Suggestions for motivating students to enter aeronautical engineering are examined. The support of the aeronautical industry for graduate education funding is recommended. Examples of actions taken by governmental agencies to promote increased interest in aeronautical engineering are included.

  15. Education of Sustainability Engineers

    Oleschko, K.; Perrier, E.; Tarquis, A. M.

    2010-05-01

    It's not the same to educate the sustainable engineers as to prepare the engineers of Sustainability. In the latter case all existing methods of inventive creativity (Altshuller, 1988) should be introduced in the teaching and research processes in order to create a culture of innovation at a group. The Theory of Inventing Problem Solving (TRIZ) is based on the pioneer works of Genrich Altshuller (1988) and his associated. Altshuller reviewed over 2 million patents beginning in 1946 (Orlov, 2006) and developed the Laws of Evolution of Technological Systems; An Algorithm for Inventive Problem Solving (ARIZ); forty typical Techniques for Overcoming System Conflicts (TOSC); a system of 76 Standard Approaches to Inventive Problems (Standards) etc. (Fey and Rivin, 1997). Nowadays, "a theory and constructive instrument package for the controlled synthesis of ideas and the focused transformation of the object to be improved" (Orlov, 2006) are used with high efficacy as the teaching and thinking inventive problem-solving methods in some high schools (Barak and Mesika, 2006; Sokoi et al., 2008) as well as a framework for research (Moehrle, 2005) in construction industry (Zhang et al., 2009); chemical engineering (Cortes Robles et al., 2008) etc. In 2005 US Congress passed the innovation act with the intent of increasing research investment (Gupta, 2007), while China had included inventive principles of TRIZ in strategy and decision making structure design (Kai Yang, 2010). The integrating of TRIZ into eco-innovation diminishes the common conflicts between technology and environment (Chang and Chen, 2004). In our presentation we show discuss some examples of future patents elaborated by the master degree students of Queretaro University, Faculty of Engineering, Mexico using TRIZ methods. References 1. Altshuller, G., 1988. Creativity as an Exact Science. Gordon and Breach, New York. 2. Chang, Hsiang-Tang and Chen, Jahau Lewis, 2004. The conflict-problem-solving CAD software

  16. Authority in Engineering Education

    Stephan, Karl D.

    2012-01-01

    Authority as a philosophical concept is defined both in general and as it applies to engineering education. Authority is shown to be a good and necessary part of social structures, in contrast to some cultural trends that regard it as an unnecessary and outmoded evil. Technical, educational, and organizational authority in their normal functions…

  17. The potential of Supplemental Instruction in engineering education - helping new students to adjust to and succeed in University studies

    Malm, Joakim; Bryngfors, Leif; Mörner, Lise-Lotte

    2015-07-01

    Supplemental Instruction (SI) is a programme that is attached to difficult courses with the objective of increasing student performance and retention. However, an SI programme also has the potential to increase overall student performance and retention during the first critical year if applied to introductory courses. In this study the latter objective is investigated in an engineering educational environment. The study shows that an SI programme attached to difficult first semester courses for new engineering students has substantial positive effects on both first-year student performance and retention. Both male and female students appear to benefit from attending SI to the same extent. Some potential reasons for these improved first-year student performances are that attendance at SI sessions appears to lead to improved self-confidence, a broader network of study partners, improved study strategies and problem-solving skills and an increased ability to critically review material and work with others.

  18. The Maritime Engineering Education

    Andersen, Ingrid Marie Vincent; Nielsen, Ulrik Dam; Lützen, Marie

    2012-01-01

    This article describes the outcome of a survey initiated by the Danish Maritime Fund (DMF). The survey resulted in a report that describes the engineering competencies requested by the Danish maritime industry. This is of interest since the desired competencies have changed in the past one to two...... decades, where Denmark no longer has a considerable ship-building industry. Furthermore, the DMF initiated report concludes that the demand for maritime engineers in the industry is larger than the output. The report sets forth a series of recommendations to the industry as well as the universities...... to enable meeting the demand for maritime engineers in Denmark. The recommendations are outlined together with the work commenced at the Technical University of Denmark (DTU) and the University of Southern Denmark (SDU) to follow up on the recommendations in the report....

  19. Engineering justice transforming engineering education and practice

    Leydens, Jon A

    2018-01-01

    Using social justice as a catalyst for curricular transformation, Engineering Justice presents an examination of how politics, culture, and other social issues are inherent in the practice of engineering. It aims to align engineering curricula with socially just outcomes, increase enrollment among underrepresented groups, and lessen lingering gender, class, and ethnicity gaps by showing how the power of engineering knowledge can be explicitly harnessed to serve the underserved and address social inequalities. This book is meant to transform the way educators think about engineering curricula through creating or transforming existing courses to attract, retain, and motivate engineering students to become professionals who enact engineering for social justice. Engineering Justice offers thought-provoking chapters on: why social justice is inherent yet often invisible in engineering education and practice; engineering design for social justice; social justice in the engineering sciences; social justice in human...

  20. Educating engineering designers for a multidisciplinary future

    engineering design education. Educating engineering designers today significantly differs from traditional engineering education (McAloone, et.al., 2007). However, a broader view of design activities gains little attention. The project course Product/Service-Systems, which is coupled to the lecture based...... course Product life and Environmental issues at the Technical University of Denmark (DTU) and the master programme Product Development Processes at the Luleå University of Technology (LTU), Sweden, are both curriculums with a broader view than traditional (mechanical) engineering design. Based...... on these two representatives of a Scandinavian approach, the purpose in this presentation is to describe two ways of educating engineering designers to enable them to develop these broader competencies of socio-technical aspects of engineering design. Product Development Processes at LTU A process, called...

  1. PBL in Engineering Education

    PBL in Engineering Education: International Perspectives on Curriculum Change presents diverse views on the implementation of PBL from across the globe. The purpose is to exemplify curriculum changes in engineering education. Drivers for change, implementation descriptions, challenges and future...... perspectives are addressed. Cases of PBL models are presented from Singapore, Malaysia, Tunisia, Portugal, Spain and the USA. These cases are stories of thriving success that can be an inspiration for those who aim to implement PBL and change their engineering education practices. In the examples presented......, the change processes imply a transformation of vision and values of what learning should be, triggering a transition from traditional learning to PBL. In this sense, PBL is also a learning philosophy and different drivers, facing diverse challenges and involving different actors, trigger its implementation...

  2. Environmental Engineering in Mining Engineering Education

    Mahamud-Lopez, Manuel Maria; Menendez-Aguado, Juan Maria

    2005-01-01

    In this paper, the current profile of the environmental engineer and the programming of the subject "Environmental Engineering and Technology" corresponding to the studies of Mining Engineering at the University of Oviedo in Spain, is discussed. Professional profile, student knowledge prior to and following instruction as well as…

  3. Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

    Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

    2009-04-01

    The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

  4. [Engineering education reform plan created by Prof. Dr. Shimizu and establishment of Nagoya Municipal Science Museum--regarding cooperative education between universities and industries in Japan after the Second World War].

    Mabuchi, Koichi

    2014-07-01

    This paper gives an account of Prof. Dr. Kinji Shimizu, the first president of Nagoya Institute of Technology, and his establishment of Nagoya Municipal Science Museum. After graduating from the Electrical Engineering Department of Kyoto Imperial University in 1923, Shimizu was impressed by the German Museum in Munich during his stay there as a student in 1932. It's the first time that he learned the education in cooperation with industries. Just after the Second World War, he became director general of the Ministry of Education. However, new education system given by the United States focused not on developing practical ability but on gaining the basic knowledge, which is contrary to what he expected. Then, he contributed to the establishment of the Japanese Society for Engineering Education, besides working as the president of Nagoya Institute of Technology in the earlier 1950s. His idea was supported by industries for the economic growth. Throughout his career, Prof. Dr. Shimizu was convinced that practical engineering education would benefit Japan, and wanted to introduce cooperative education between universities and industries, along the lines of the same system in Germany and the United States. With this vision he founded Nagoya Municipal Science Museum in cooperation with local industries and local government as his final achievement. The museum was completed in 1964.

  5. Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

    Monroe, Joseph; Kelkar, Ajit

    2003-01-01

    The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

  6. The Way-Finding in Educational Modular Buildings: The Case of the Male Engineering Building at Qatar University

    Simona Azzali

    2018-01-01

    Full Text Available Way-finding is the ability of people to perceive routes, flow patterns, or passageways inside and/or around a building. In other words, it is the capability of a person to know their whereabouts in a space. Modular buildings and complex spatial plan structure, in general, can be very confusing, especially from a way-finding point of view. This research attempts to measure the way-finding performance of a modular building by assessing the users’ experience in finding their way inside the Male Engineering Building at Qatar University. The study involved students, faculty, and staff members that utilize that space daily. The research focused on accessing indoor spaces as well as the walkways and spaces connected to the building. Results show that parameters as the use of colours and numbers can improve capability and swiftness in way-finding. In future research, several types of signage and visual elements will be tested, in order to understand how they can enhance way-finding efficiency and user performance within indoor spaces.

  7. US nuclear engineering education: Status and prospects

    1990-01-01

    This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the aging of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and research funding, and the increasing ratio of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 12 figs., 20 tabs.

  8. US Nuclear Engineering Education: Status and prospects

    1990-01-01

    This study, conducted under the auspices of the Energy Engineering Board of the National Research Council, examines the status of and outlook for nuclear engineering education in the United States. The study, as described in this report resulted from a widely felt concern about the downward trends in student enrollments in nuclear engineering, in both graduate and undergraduate programs. Concerns have also been expressed about the declining number of US university nuclear engineering departments and programs, the ageing of their faculties, the appropriateness of their curricula and research funding for industry and government needs, the availability of scholarships and research funding, and the increasing ratio of foreign to US graduate students. A fundamental issue is whether the supply of nuclear engineering graduates will be adequate for the future. Although such issues are more general, pertaining to all areas of US science and engineering education, they are especially acute for nuclear engineering education. 30 refs., 24 figs., 49 tabs

  9. Biomedical Engineering at the Technical University of Denmark

    Jensen, Jørgen Arendt; Andersen, Ole Trier; Wilhjelm, Jens Erik

    1998-01-01

    The paper gives a brief overview of the biomedical engineering research and education at the Technical University of Denmark. An account of the research activities since the 1950?s is given, and examples of major efforts within ultrasound, biomagnetism, and neuroimaging are described. The evolution...... of the teaching activities since the late 1960?s along with an account of the recent initiatives to make a biomedical engineering profile at the university is described....

  10. Education of nuclear engineering in Japan

    Ozawa, Yasutomo; Yamamuro, Nobuhiro

    1979-01-01

    The research Committee of Nuclear Engineering Education has two working groups. One group has carried out surveyes on the curriculums of nuclear engineering course of universities in Japan and the activities of graduates in the industrial worlds. The other group conducted an investigation on the present status of energy education in senior high schools. This is an interim report on the activity of the research committee. (author)

  11. Satellite education: The national technological university

    Waugh, J.D.

    1989-01-01

    National Technological University (NTU) was founded to address the wide-ranging educational needs of the employed technical professional. A state-of-the-art satellite delivery system allows nationwide coverage by participating engineering colleges. Established in 1984, NTU is now a nonprofit effort of 24 engineering colleges. The NTU network grew rapidly to its present configuration, and enrollment patterns clearly demonstrate the need and acceptance of the concept. Each member school teaches its own courses (with on-campus students enrolled) over the network and awards its own grades. Receiving sites at NTU are operated by a sponsoring organization (i.e., the employer) in accordance with NTU guidelines. Masters degrees are offered in electrical engineering, computer engineering, computer science, engineering management, and manufacturing engineering. Several certificate programs are also available. Typically, NTU telecasts 80 credit courses each term. Over 50,000 attend continuing education courses, tutorials, and research teleconferences each year. Newly acquired channels will enable further expansion

  12. Internationalisation of Engineering Education

    Hussain Maken, Tanveer

    2013-01-01

    This paper discussed the influence of cultural differences on the learning experiences of students in intercultural group at Project Based Learning environment at Aalborg University. The data for this paper has been drawn from a PhD project which focuses on the learning experiences of students in...... in intercultural groups. The background of this project is the internationalization of higher education and the emergence of innovative teaching and learning methodologies which emphases student centered learning....

  13. Conference Modern Engineering : Science and Education

    2017-01-01

    This book draws together the most interesting recent results to emerge in mechanical engineering in Russia, providing a fascinating overview of the state of the art in the field in that country which will be of interest to a wide readership. A broad range of topics and issues in modern engineering are discussed, including dynamics of machines, materials engineering, structural strength and tribological behavior, transport technologies, machinery quality and innovations. The book comprises selected papers presented at the conference "Modern Engineering: Science and Education", held at the Saint Petersburg State Polytechnic University in 2016 with the support of the Russian Engineering Union. The authors are experts in various fields of engineering, and all of the papers have been carefully reviewed. The book will be of interest to mechanical engineers, lecturers in engineering disciplines and engineering graduates.

  14. Transition from high schools to engineering education

    Kolmos, Anette; Holgaard, Jette Egelund; Clausen, Nicolaj Riise

    2017-01-01

    Pre-university engineering education has received increasing attention to attract more students to engineering and make them better prepared to enter engineering studies at university level. Denmark is one of the countries that offer established high school curriculum that makes engineering...... the core identity of the school. In a longitudinal research project, the cohort of all Danish engineering students who were enrolled in 2010 has been followed. This study takes a quantitative approach to highlight the differences in preparedness for engineering students who have a background...... themselves as being better prepared in relation to the conduct of experiments, engineering analysis and tolls, as well as in relation to process competences as design, problem solving and teamwork. The students from the profession-oriented high schools also find themselves better prepared in relation...

  15. Integrating sustainability in Engineering Education in Denmark

    Jørgensen, Ulrik; Valderrama Pineda, Andres Felipe; Remmen, Arne

    2013-01-01

    How to include sustainability in engineering education is currently the main concern among engineering educators. In one way or another, engineering educators are increasingly addressing sustainability issues in the courses they teach, the programs they design and run, the institutional activities...... to be a broader social concern to be taken across programs or eventually in specialised new professional endeavours? To further this discussion, in the second part of this paper we examine how environmental, energy and sustainability we will present some details of the design of the Master Engineering programs...... on Sustainable Cities and Sustainable Design at Aalborg University in Denmark. These programs claim to have developed effective strategies for educating robust engineers capable of dealing with the complexities of the needed calculations and the modelling of physical processes and at the same time able to cope...

  16. University of Maryland MRSEC - Education

    Educational Education Pre-College Programs Homeschool Programs Undergraduate & Graduate Programs Teacher MRSEC Templates Opportunities Search Home » Education Education Outreach University of Maryland MRSEC : Championing Service-based Education Outreach Since 1996 Program Areas Pre-college Programs Project Lead the

  17. Railroad Engineering Education Symposium (REES) 2012 and 2014.

    2016-01-25

    Since its initial offering in 2008, the objective of the Railroad Engineering Education Symposium (REES) has been to develop interest among university faculty in railroad transportation engineering, with the goal of facilitating and supporting their ...

  18. Teaching contextual knowledge in engineering education – Theory of Engineering Science and the Core Curriculum at the Technical University of Denmark

    Jørgensen, Ulrik; Brodersen, Søsser

    2011-01-01

    practice. Consequently courses added into engineering curricula emphasizing contextual issues stay in stark contrast to the dominant instrumental disciplines of mathematics and techno-science content of core engineering courses. Based on several years of teaching and experimenting with Theory of Science...

  19. NASA's engineering research centers and interdisciplinary education

    Johnston, Gordon I.

    1990-01-01

    A new program of interactive education between NASA and the academic community aims to improve research and education, provide long-term, stable funding, and support cross-disciplinary and multi-disciplinary research. The mission of NASA's Office of Aeronautics, Exploration and Technology (OAET) is discussed and it is pointed out that the OAET conducts about 10 percent of its total R&D program at U.S. universities. Other NASA university-based programs are listed including the Office of Commercial Programs Centers for the Commercial Development of Space (CCDS) and the National Space Grant program. The importance of university space engineering centers and the selection of the nine current centers are discussed. A detailed composite description is provided of the University Space Engineering Research Centers. Other specialized centers are described such as the Center for Space Construction, the Mars Mission Research Center, and the Center for Intelligent Robotic Systems for Space Exploration. Approaches to educational outreach are discussed.

  20. Project based education as motivation factor in undergraduate program in Electronics at Copenhagen University College of Engineering

    Friesel, Anna

    2012-01-01

    This paper summarizes the contents of our experience with project based courses and team work in the undergraduate program in Electronics. The main points of our program are described in this paper, where the leading idea is to combine theory with practical engineering projects. Our students work...

  1. Thermal hydraulics in undergraduate nuclear engineering education

    Theofanous, T.G.

    1986-01-01

    The intense safety-related research efforts of the seventies in reactor thermal hydraulics have brought about the recognition of the subject as one of the cornerstones of nuclear engineering. Many nuclear engineering departments responded by building up research programs in this area, and mostly as a consequence, educational programs, too. Whether thermal hydraulics has fully permeated the conscience of nuclear engineering, however, remains yet to be seen. The lean years that lie immediately ahead will provide the test. The purpose of this presentation is to discuss the author's own educational activity in undergraduate nuclear engineering education over the past 10 yr or so. All this activity took place at Purdue's School of Nuclear Engineering. He was well satisfied with the results and expects to implement something similar at the University of California in Santa Barbara in the near future

  2. ENGINEERING OF UNIVERSITY INTELLIGENT LEARNING SYSTEMS

    Vasiliy M. Trembach

    2016-01-01

    Full Text Available In the article issues of engineering intelligent tutoring systems of University with adaptation are considered. The article also dwells on some modern approaches to engineering of information systems. It shows the role of engineering e-learning devices (systems in system engineering. The article describes the basic principles of system engineering and these principles are expanded regarding to intelligent information systems. The structure of intelligent learning systems with adaptation of the individual learning environments based on services is represented in the article.

  3. Engaging Historically Black Colleges and Universities through Science, Technology, Engineering and Math (STEM) Education and Community Engagement

    EPA’s STEM Outreach Program in RTP began in 2004, with the aim of supporting EPA’s mission of protecting human health and the environment by increasing awareness, providing education, and inspiring the public, especially K-12 students.

  4. Computer graphics in engineering education

    Rogers, David F

    2013-01-01

    Computer Graphics in Engineering Education discusses the use of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) as an instructional material in engineering education. Each of the nine chapters of this book covers topics and cites examples that are relevant to the relationship of CAD-CAM with engineering education. The first chapter discusses the use of computer graphics in the U.S. Naval Academy, while Chapter 2 covers key issues in instructional computer graphics. This book then discusses low-cost computer graphics in engineering education. Chapter 4 discusses the uniform b

  5. Integration of Sustainability in Engineering Education

    Guerra, Aida

    2017-01-01

    Purpose: Education for sustainable development (ESD) is one of the challenges engineering education currently faces. Engineering education needs to revise and change its curriculum to integrate ESD principles and knowledge. Problem based learning (PBL) has been one of the main learning pedagogies...... used to integrate sustainability in engineering education. However, there is a lack of understanding of the relation between ESD and PBL principles and the ways in which they can be integrated and practised in the engineering curricula. This paper aims to investigate the relation between PBL and ESD...... knowledge and the tacit presence of sustainability. Originality/value: The existence of a PBL curriculum at institutional level, such as at Aalborg University, enables investigation of how the PBL and ESD principles are practised, highlighting the limitations and potentials of integrating sustainability...

  6. Reflections on Software Engineering Education

    van Vliet, H.

    2006-01-01

    In recent years, the software engineering community has focused on organizing its existing knowledge and finding opportunities to transform that knowledge into a university curriculum. SWEBOK (the Guide to the Software Engineering Body of Knowledge) and Software Engineering 2004 are two initiatives

  7. University Experiences and Women Engineering Student Persistence

    Ayers, LoAnn Debra Gienger

    Riverside University (a pseudonym), like many universities, has not significantly increased the number of women who graduate with bachelor's degrees in engineering. The purpose of the study is to understand how the university experiences of women students influence the decision to persist in an undergraduate engineering degree and to understand the role of self-perception in how the students perceive experiences as supporting or hindering their persistence in the major. Archival data, documents and artifacts, observations, individual interviews, and a focus group with women engineering students provide insights into students' perceived barriers and supports of student success. Analysis of the data results in two major themes. First, students' self-confidence and self-efficacy influence how women assimilate university experiences as either supportive or diminishing of academic success. Second, university policies and practices shape the campus environment within which student experiences are formed and influence a student's level of institutional, academic, and social integration. The results of the study indicate opportunities for university leadership to enhance strategies that positively shape students' institutional, academic and social integration as precursors toward increasing the number of women students who successfully complete undergraduate engineering degrees at Riverside University. Future research is indicated to better understand how gender and gender identity intersects with other demographic factors, such as socio-economic status, immigration status, and life stage (e.g., traditional versus non-traditional students), to support or deter the persistence of engineering students to degree completion.

  8. Comparison of Engineering Education in Norway and China

    Sun, Xiaodong; Jia, Yanrui; Li, Zhenchun; Song, Yu

    2018-01-01

    The Washington Accord is an internationally recognized agreement in engineering education of undergraduates. China joined the agreement as the 18th member country in 2016. The exploration technology and engineering major of China University of Petroleum has obtained the professional certification from international engineering education system and…

  9. Australian Engineering Educators' Attitudes towards Aboriginal Cultures and Perspectives

    Goldfinch, Thomas; Prpic, Juliana Kaya; Jolly, Lesley; Leigh, Elyssebeth; Kennedy, Jade

    2017-01-01

    In Australia, representation of Aboriginal populations within the engineering profession is very low despite participation targets set by Government departments, professional bodies and Universities. Progressing the Aboriginal inclusion agenda within Australian Engineering Education requires a clearer understanding of engineering educators'…

  10. The impact of entrepreneurship education on the entrepreneurial intention of students in science and engineering versus business studies university programs

    Maresch, Daniela; Harms, Rainer; Kailer, Norbert; Wimmer-Wurm, Birgit

    2016-01-01

    Academic research has shown that Entrepreneurship Education (EE) increases Entrepreneurial Intention (EI). However, this does not happen uniformly in all contexts, as specific contexts may require different EE action. In this paper the authors investigate the context-specific questions in two

  11. Enhancing environmental engineering education in Europe

    Caporali, Enrica; Tuneski, Atanasko

    2013-04-01

    In the frame of knowledge triangle: education-innovation-research, the environmental engineering higher education is here discussed with reference to the TEMPUS-Trans European Mobility Programme for University Studies promoted by the European Commission. Among the focused aspects of TEMPUS are curricula harmonization and lifelong learning programme development in higher education. Two are the curricula, since the first TEMPUS project, coordinated in the period 2005-2008 by University of Firenze in cooperation with colleagues of the Ss Cyril and Methodius University, Skopje. The second three years TEMPUS Joint Project denominated DEREL-Development of Environment and Resources Engineering Learning, is active since October 2010. To the consortium activities participate 4 EU Universities (from Italy, Greece, Germany and Austria), 7 Partner Countries (PC) Universities (from FYR of Macedonia, Serbia and Albania), and 1 PC Ministry, 4 PC National Agencies, 1 PC non governmental organization and 1 PC enterprise. The same 4 EU Universities and the same Macedonian Institutions participated at the first TEMPUS JEP entitled DEREC-Development of Environmental and Resources Engineering Curriculum. Both the first and second cycle curriculum, developed through the co-operation, exchange of know-how and expertise between partners, are based on the European Credit Transfer System and are in accordance with the Bologna Process. Within DEREC a new three-years first cycle curriculum in Environmental and Resources Engineering was opened at the University Ss Cyril and Methodius, Skopje, and the necessary conditions for offering a Joint Degree Title, on the basis of an agreement between the Ss. Cyril and Methodius University and the University of Firenze, were fulfilled. The running DEREL project, as a continuation of DEREC, is aimed to introduce a new, up-to-date, postgraduate second cycle curriculum in Environment and Resources Engineering at the Ss Cyril and Methodius University in

  12. Sharecropping in Higher Education: Case Study of the Florida Agricultural and Mechanical University-Florida State University Joint College of Engineering

    Darnell, Carl

    2017-01-01

    Historically Black Colleges and Universities have historically been given less funding than White institutions, a known discrepancy partially rectified by the Civil Rights era desegregation lawsuits. The court-ordered funding, however, came with race-based restrictions for public HBCUs, and many lost academic programs to traditionally White…

  13. Project-based learning applied to spacecraft power systems: a long-term engineering and educational program at UPM University

    Pindado, Santiago; Cubas, Javier; Roibás-Millán, Elena; Sorribes-Palmer, Félix

    2018-03-01

    The IDR/UPM Institute is the research center responsible for the Master in Space Systems (MUSE) of Universidad Politécnica de Madrid (UPM). This is a 2-year (120 ECTS) master's degree focused on space technology. The UPMSat-2 satellite program has become an excellent educational framework in which the academic contents of the master are trained through project-based learning and following a multidisciplinary approach. In the present work, the educational projects developed and carried out in relation to spacecraft power systems at the IDR/UPM Institute are described. These projects are currently being developed in the framework represented by the aforementioned MUSE master's program and UPMSat-2.

  14. Integrating Ethics into Engineering Education

    Zhou, Chunfang; Otrel-Cass, Kathrin; Børsen, Tom

    2015-01-01

    In this chapter, the authors aim to explore the necessity of teaching ethics as part of engineering education based on the gaps between learning “hard” knowledge and “soft” skills in the current educational system. They discuss why the nature of engineering practices makes it difficult to look...... products are not value neutral. With a focus on Problem-Based Learning (PBL), the authors examine why engineers need to incorporate ethical codes in their decision-making process and professional tasks. Finally, they discuss how to build creative learning environments that can support attaining...... the objectives of engineering education....

  15. Capacity Building for Engineering Education

    de Graaff, Erik; Deboer, Jennifer

    2015-01-01

    faculty leadership training workshops/courses/seminars, helping to broker the offering of these around the world. Since 2011 IIDEA has been offering diverse workshops facilitated by top engineering education leaders as stand alone or as pre- post conference activities. Engineering educators...

  16. Virtual Reality and Engineering Education.

    Pantelidis, Veronica S.

    1997-01-01

    Virtual Reality (VR) offers benefits to engineering education. This article defines VR and describes types; outlines reasons for using VR in engineering education; provides guidelines for using VR; presents a model for determining when to use VR; discusses VR applications; and describes hardware and software needed for a low-budget VR and…

  17. Environmental health engineering students\\' attitudes toward their education program and career in Shahid Sadoughi University of Medical Sciences in 2015

    M Mirnasab

    2016-07-01

    Full Text Available Introduction: Increasing numbers of medical sciences graduates is counted to be one of the problems in the society, so that there is concerning about their majors and future careers among them. This study was performed with the aim of determining environmental health students' attitude toward their majors and future careers, which was carried out in Yazd University of Medical Sciences in 2015. Method: This analytical, descriptive study was performed in 2015. The samples were Environmental Health students of Yazd University of Medical Sciences. The sample size was 102. Data were collected using a questionnaire containing 20 questions and analyzed by SPSS software version 21, multiple linear regression test, one-sample t-test and Chi-Square test. Results: The mean and standard deviation of environmental students' attitude toward their majors and future careers were 3.16 and 0.66, respectively. Attitude scores more than 3 were considered positive and less than 3 were negative. The mean scores of attitude was significantly higher than 3 (P=0.012. In this study, there was a significant relationship between students’ attitude and location status (P=0.003. Conclusion: According to the obtained results, the students of environment health had a good perspective towards their future careers and majors of study. A proper distribution of human resources, providing financial support of employment, establishing counselling and supporting centers among students for future career is recommended to improve their attitudes.

  18. Development of security engineering curricula at US universities

    Garcia, M.L.

    1998-08-01

    The Southwest Surety Institute was formed in June 1996 by Arizona State University (ASU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL) to provide educational programs in Security Engineering, and to conduct research and development in security technologies. This is the first science-based program of its kind in the US, focused on educating Security Engineers to help government and industry address their security needs. Each member brings a unique educational capability to the Institute. NM Tech has a formidable explosives testing and evaluation facility. ASU is developing a Masters program in Security Engineering at their School of Technology located on a new campus in Mesa, Arizona. NMSU provides a Security Technology minor, merging programs in Criminal Justice and Engineering Technology. The Sandia National Laboratories security system design and evaluation process forms the basis for the Security Engineering curricula. In an effort to leverage the special capabilities of each university, distance education will be used to share courses among Institute members and eventually with other sites across the country.

  19. Virtualization-support Cases in Engineering Education

    Soler, José

    2011-01-01

    The paper presents cases of applying hardware virtualization techniques as support for education activities in two different courses and a master thesis within the degree International MSc on Telecommunication Engineering at the Technical University of Denmark (DTU). The triggering problem...... is presented in each of the cases, together with the benefits and drawbacks of using virtualization to cope with it....

  20. Industrial Strength Changes in Engineering Education.

    Chatziioanou, Alypios; Sullivan, Edward

    2002-01-01

    Addresses the question of how closely the objectives of industry and engineering education should be aligned. Examines trends in college-business relationships using the example of California Polytechnic State University. Reflects on benefits and problems of closer connections with industry. (SK)

  1. The University, the Market, and the Geodetic Engineer or

    Stubkjær, Erik

    2002-01-01

    In Europe, universities have existed for more than 800 years. The university is the place in society for higher learning and related research. Through the ages, the universities have enjoyed a remarkably freedom relative to religious and secular powers. In recent years, the objectives and practises...... project, which concerned the education of geodetic engineers in Slovenia. The body of the paper presents a selection of ideas that shaped the university through the centuries, with a view to balance the present interest in advancing market-directed behaviour....

  2. Assembling University Education

    Olsen, Poul Bitsch

    2015-01-01

    material organizing devices, students as learning subjects, and teachers as experienced academic practitioners are discussed in order to explore how academic values are translated and transformed during the education process, and how the material assemblages in evidence are both reflective and constitutive...... of educational values. By placing a focus on how values are materialized, the paper extends the understanding of educational institutions and schools as social places to learn in a direction that is relevant for both organizational studies and educational policy discussions. By examining specific configurations...... or assemblages, we are able to understand in detail how academic discourse and situations structure the educational regime....

  3. Innovation and Research on Engineering Education

    de Graaff, Erik; Kolmos, Anette

    2014-01-01

    Our Western society depends strongly on continuous technological innovation. Engineers, the designers of the future technology need extensive competencies to face the challenge of dealing with ever increasing complexity. In some areas more than half the knowledge they learn in University is obsol......Our Western society depends strongly on continuous technological innovation. Engineers, the designers of the future technology need extensive competencies to face the challenge of dealing with ever increasing complexity. In some areas more than half the knowledge they learn in University...... is obsolete by the time the enter practice. Recognition of these issues has recently resulted in worldwide increase of attention for innovation of engineering education. This chapter presents a brief outline of the traditions in higher engineering education culminating in the stage of research and development...... in the last century. Next, the recent revival of engineering education research is described, contrasting the developments in the USA with Europe and the rest of the world. The efforts in the USA appear to follow Boyer’s concept scholarship of teaching, and aim for the establishment of engineering education...

  4. Gerontechnology in higher engineering education

    Rietsema, J.; Graafmans, J.; Taipale, V.; Charness, N.

    1998-01-01

    This paper is based on experiences with designing an educational programme on gerontechnology at Eindhoven University of Technology (TUE) and designing and developing various international gerontechnology courses. There are two major goals for education in gerontechnology: (1) creation of a

  5. Education of biomedical engineering in Taiwan.

    Lin, Kang-Ping; Kao, Tsair; Wang, Jia-Jung; Chen, Mei-Jung; Su, Fong-Chin

    2014-01-01

    Biomedical Engineers (BME) play an important role in medical and healthcare society. Well educational programs are important to support the healthcare systems including hospitals, long term care organizations, manufacture industries of medical devices/instrumentations/systems, and sales/services companies of medical devices/instrumentations/system. In past 30 more years, biomedical engineering society has accumulated thousands people hold a biomedical engineering degree, and work as a biomedical engineer in Taiwan. Most of BME students can be trained in biomedical engineering departments with at least one of specialties in bioelectronics, bio-information, biomaterials or biomechanics. Students are required to have internship trainings in related institutions out of campus for 320 hours before graduating. Almost all the biomedical engineering departments are certified by IEET (Institute of Engineering Education Taiwan), and met the IEET requirement in which required mathematics and fundamental engineering courses. For BMEs after graduation, Taiwanese Society of Biomedical Engineering (TSBME) provides many continue-learning programs and certificates for all members who expect to hold the certification as a professional credit in his working place. In current status, many engineering departments in university are continuously asked to provide joint programs with BME department to train much better quality students. BME is one of growing fields in Taiwan.

  6. Education of mining engineers with the specialization in Rescue, fire and safety technique at the BERG Faculty of the Technical University of Košice

    Sedlatý Václav

    2002-12-01

    Full Text Available After the separation of Czechoslovakia, in 1993, the Mining Faculty (now BERG Faculty of the Technical University of Košice started a teaching program with the specialization in mining rescue, fire guard and safety technique at the Detachment in Prievidza, because of all the needs and conditions related to the education of engineers in the mentioned areas. During the last 10 years, the Detachment in Prievidza has been growing in terms of number of students. From the beginning of this period to present days 75 students graduated. The full-time studies last five years and the academic years are divided into two semesters of 15 weeks each. The semesters are finished by examination sessions. The first 2 years, in principle, include basic studies in mathematics, scientific subjects and some subjects related to earth sciences. The third and fourth year are generally devoted to basic technical subjects of mining and underground works, and then to rescue, fire and safety subjects. A practical work experience has to be gained by students in a mine or fire and safety stations. The practical training term is scheduled after the third academic year. During the last two semesters the students are preparing their Master’s degree thesis using a stay in the mine company or other firms to receive the necessary information and data.

  7. International Conference on Transformations in Engineering Education

    2015-01-01

    This book comprises the proceedings of the International Conference on Transformations in Engineering Education conducted jointly by BVB College of Engineering & Technology, Hubli, India and Indo US Collaboration for Engineering Education (IUCEE). This event is done in collaboration with International Federation of Engineering Education Societies (IFEES), American Society for Engineering Education (ASEE) and Global Engineering Deans' Council (GEDC). The conference is about showcasing the transformational practices in Engineering Education space.

  8. University/Science Center Collaborations (A Science Center Perspective): Developing an Infrastructure of Partnerships with Science Centers to Support the Engagement of Scientists and Engineers in Education and Outreach for Broad Impact

    Marshall, Eric

    2009-03-01

    Science centers, professional associations, corporations and university research centers share the same mission of education and outreach, yet come from ``different worlds.'' This gap may be bridged by working together to leverage unique strengths in partnership. Front-end evaluation results for the development of new resources to support these (mostly volunteer-based) partnerships elucidate the factors which lead to a successful relationship. Maintaining a science museum-scientific community partnership requires that all partners devote adequate resources (time, money, etc.). In general, scientists/engineers and science museum professionals often approach relationships with different assumptions and expectations. The culture of science centers is distinctly different from the culture of science. Scientists/engineers prefer to select how they will ultimately share their expertise from an array of choices. Successful partnerships stem from clearly defined roles and responsibilities. Scientists/engineers are somewhat resistant to the idea of traditional, formal training. Instead of developing new expertise, many prefer to offer their existing strengths and expertise. Maintaining a healthy relationship requires the routine recognition of the contributions of scientists/engineers. As professional societies, university research centers and corporations increasingly engage in education and outreach, a need for a supportive infrastructure becomes evident. Work of TryScience.org/VolTS (Volunteers TryScience), the MRS NISE Net (Nanoscale Informal Science Education Network) subcommittee, NRCEN (NSF Research Center Education Network), the IBM On Demand Community, and IEEE Educational Activities exemplify some of the pieces of this evolving infrastructure.

  9. Pedagogical Training and Research in Engineering Education

    Wankat, Phillip C.

    2008-01-01

    Ferment in engineering has focused increased attention on undergraduate engineering education, and has clarified the need for rigorous research in engineering education. This need has spawned the new research field of Engineering Education and greatly increased interest in earning Ph.D. degrees based on rigorous engineering education research.…

  10. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1995

    1996-08-01

    This is an annual report prepared on research education action, operation state of research instruments and others in FY 1995 at Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo. The laboratory has four large instruments such as high speed neutron source reactor, 'Yayoi', electron linac, fundamentally experimental equipment for blanket design of nuclear fusion reactor, and heavy radiation research equipment (HIT), of which former two are used for cooperative research with universities in Japan, and the next blanket and the last HIT are also presented for cooperative researches in Faculty of Engineering and in University of Tokyo, respectively. FY 1995 was the beginning year of earnest discussion on future planning of this facility with concentrated effort. These four large research instruments are all in their active use. And, their further improvement is under preparation. In this report, the progress in FY 1995 on operation and management of the four large instruments are described at first, and on next, research actions, contents of theses for degree and graduation of students as well as research results of laboratory stuffs are summarized. These researches are constituted mainly using these large instruments in the facility, aiming at development of advanced and new field of atomic energy engineering and relates to nuclear reactor first wall engineering, nuclear reactor fuel cycle engineering, electromagnetic structure engineering, thermal-liquid engineering, mathematical information engineering, quantum beam engineering, new type reactor design and so on. (G.K.)

  11. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1995

    NONE

    1996-08-01

    This is an annual report prepared on research education action, operation state of research instruments and others in FY 1995 at Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo. The laboratory has four large instruments such as high speed neutron source reactor, `Yayoi`, electron linac, fundamentally experimental equipment for blanket design of nuclear fusion reactor, and heavy radiation research equipment (HIT), of which former two are used for cooperative research with universities in Japan, and the next blanket and the last HIT are also presented for cooperative researches in Faculty of Engineering and in University of Tokyo, respectively. FY 1995 was the beginning year of earnest discussion on future planning of this facility with concentrated effort. These four large research instruments are all in their active use. And, their further improvement is under preparation. In this report, the progress in FY 1995 on operation and management of the four large instruments are described at first, and on next, research actions, contents of theses for degree and graduation of students as well as research results of laboratory stuffs are summarized. These researches are constituted mainly using these large instruments in the facility, aiming at development of advanced and new field of atomic energy engineering and relates to nuclear reactor first wall engineering, nuclear reactor fuel cycle engineering, electromagnetic structure engineering, thermal-liquid engineering, mathematical information engineering, quantum beam engineering, new type reactor design and so on. (G.K.)

  12. African-American Women's Experiences in Graduate Science, Technology, Engineering, and Mathematics Education at a Predominantly White University: A Qualitative Investigation

    Alexander, Quentin R.; Hermann, Mary A.

    2016-01-01

    In this phenomenological investigation we used qualitative research methodology to examine the experiences of 8 African American women in science, technology, engineering, and mathematics (STEM) graduate programs at 1 predominantly White university (PWU) in the South. Much of the current research in this area uses quantitative methods and only…

  13. Collaboration in nuclear engineering education between France and the United States: Participation of French students at Texas A ampersand M University

    Peddicord, K.L.; Durand, J.L.; Gousty, Y.; Jeneveau, A.; Erdman, C.A.

    1988-01-01

    Universities in the United States have had a long tradition of accepting students from other countries to pursue graduate degrees. This has particularly been the case in the fields of engineering and science. This trend has grown to the point that in several graduate engineering fields, the percentage of foreign nationals outnumbers US enrollees. Historically, most foreign students studying in the US universities have been from developing countries. Usually these students apply and are accepted on a case-by-case basis. For a number of reasons, less emphasis has been placed on programs with western Europe. In this paper, a program of collaboration is described in which the Department of Nuclear Engineering at Texas A ampersand M University has entered into memoranda of agreement with two institutions in France. The two universities are the Institut National Polytechnique de Grenoble (INPG) in Grenoble and the Ecole Polytechnique Feminine (EPF) in Sceaux. The purpose of the program is to enable students in nuclear engineering to simultaneously complete requirements for the diploma and the MS degree

  14. Makerspaces in Engineering Education: A Case Study

    Jensen, Lasse Skovgaard; Özkil, Ali Gürcan; Mougaard, Krestine

    2016-01-01

    it by opening makerspaces and adopting elements of the Maker Movement in their offerings. This paper investigates how university driven makerspaces can affect engineering design and product development education trough a case study. We provide our findings based on interviews and data collected from educators......, students the administrative and workshop staff of the makerspace. The findings are used to outline the challenges in incorporating the offerings of makerspaces. By discussing these challenges we identify opportunities for turning university makerspaces into innovation hubs and platforms that can support...

  15. Entrepreneurship Education in Malaysian Universities

    Ahmad, Syed Zamberi; Buchanan, Robert Frederick

    2015-01-01

    Entrepreneurship education in the strongly emerging market of Malaysia was examined throughout the country's 20 public universities. A broad based interview process amongst multiple stakeholders profiled educational policies as well as revealing shortcomings in practice. Observers noted that students showed a preference for salaried jobs after…

  16. Software Engineering Education Directory

    1990-04-01

    and Engineering (CMSC 735) Codes: GPEV2 * Textiooks: IEEE Tutoria on Models and Metrics for Software Management and Engameeing by Basi, Victor R...Software Engineering (Comp 227) Codes: GPRY5 Textbooks: IEEE Tutoria on Software Design Techniques by Freeman, Peter and Wasserman, Anthony 1. Software

  17. Project based learning for reactor engineering education

    Narabayashi, Tadashi; Tsuji, Masashi; Shimazu, Yoichiro

    2009-01-01

    Trial in education of nuclear engineering in Hokkaido University has proved to be quite attractive for students. It is an education system called Project Based Learning (PBL), which is not based on education by lecture only but based mostly on practice of students in the classroom. The system was adopted four years ago. In the actual class, we separated the student into several groups of the size about 6 students. In the beginning of each class room time, a brief explanations of the related theory or technical bases. Then the students discuss in their own group how to precede their design calculations and do the required calculation and evaluation. The target reactor type of each group was selected by the group members for themselves at the beginning of the semester as the first step of the project. The reactor types range from a small in house type to that for a nuclear ship. At the end of the semester, each group presents the final design. The presentation experience gives students a kind of fresh sensation. Nowadays the evaluation results of the subject by the students rank in the highest in the faculty of engineering. Based on the considerations above, we designed the framework of our PBL for reactor engineering. In this paper, we will present some lessons learned in this PBL education system from the educational points of view. The PBL education program is supported by IAE/METI in Japan for Nuclear Engineering Education. (author)

  18. Sustainable Development in Engineering Education

    Taoussanidis, Nikolaos N.; Antoniadou, Myrofora A.

    2006-01-01

    The principles and practice of environmentally and socially sustainable engineering are in line with growing community expectations and the strengthening voice of civil society in engineering interventions. Pressures towards internationalization and globalization are reflected in new course accreditation criteria and higher education structures.…

  19. Biomedical Engineering Education in Perspective

    Gowen, Richard J.

    1973-01-01

    Discusses recent developments in the health care industry and their impact on the future of biomedical engineering education. Indicates that a more thorough understanding of the complex functions of the living organism can be acquired through the application of engineering techniques to problems of life sciences. (CC)

  20. Importance of Engineering History Education

    Arakawa, Fumio

    It is needless to cite the importance of education for succeed of engineering. IEEJ called for the establishment of ICEE in 1994, where the education is thought highly of, though its discussion has not been well working. Generally speaking, education has been one of the most important national strategies particularly at a time of its political and economical development. The science and technology education is, of course, not the exemption. But in these days around 2000 it seems that the public pays little attention on the science and technology, as they are quite day to day matters. As the results, for instance, such engineering as power systems and electric heavy machines are referred to as “endangered”. So fur, many engineers have tried not to be involved in social issues. But currently they can not help facing with risks of social issues like patent rights, troubles and accidents due to application of high technology, information security in the use of computers and engineering ethics. One of the most appropriate ways for the risk management is to learn lessons in the past, that is, history, so that the idea suggested in it could be made full use for the risk management. The author cited the global importance of education, particularly of engineering history education for engineering ethics, in the ICEE 2010 held in Bussan, Korea, as the 16th anniversary.

  1. English Curriculum in Global Engineer Education Program

    Furuya, Okitsugu; Bright, Olga; Saika, Takashi

    The educational goal of the Faculty of Global Engineering (FGE) of the Kogakuin University is to prepare the graduates to be global engineers. The requirements for the global engineer are multifold; having the basic and advanced engineering knowledge together with the international communication skills and experiences. The curriculum at the Kogakuin University has been designed and developed over the last ten years. Among others, “Communication Skills for Global Engineers (CSGE) ” and “Engineering Clinic Program (ECP) ” play essential roles, the former providing the students with the communication skills and the latter engineering design skills. An impact on the students studying together with foreign students is so strong and immeasurable. The English they learned in Japan does not work as well as they thought it would, and the attitude of the foreign students toward studying they observe is a kind of “shocking” . The student who joined ECP abroad/CSGE abroad come back to Japan as a very inspired and different person, the first step becoming a global engineer. In this paper, various aspects of the program will be discussed with the problem areas to be further improved being identified.

  2. Towards the European Nuclear Engineering Education Network

    Mavko, B.; Giot, M.; Sehgal, B.R.; Goethem, G. Van

    2003-01-01

    Current priorities of the scientific community regarding basic research lie elsewhere than in nuclear sciences. The situation today is significantly different than it was three to four decades ago when much of the present competence base in nuclear sciences was in fact generated. In addition, many of the highly competent engineers and scientists, who helped create the present nuclear industry, and its regulatory structure, are approaching retirement. To preserve nuclear knowledge and expertise through the higher nuclear engineering education in the 5 th framework program of the European Commission the project ENEN (European Nuclear Engineering Education Network) was launched, since the need to keep the university curricula in nuclear sciences and technology alive has been clearly recognized at European level. As the follow up of this project an international nuclear engineering education consortium of universities with partners from the nuclear sector is presently in process of being established This association called ENEN has as founding members: 14 universities and 8 research institutes from 17 European countries. (author)

  3. The relevance of surveying content in mining engineering education ...

    The University of the Witwatersrand School of Mining Engineering (Wits Mining) has its origins in the South African School of Mines, which was established in 1896. It is currently recognised as one of the world's top mining engineering schools that educate mining engineering candidates to become qualified to specialise in ...

  4. Growth of Engineering Education in India: Status, Issues, and Challenges

    Choudhury, Pradeep Kumar

    2016-01-01

    This article examines the growth of engineering education in India in the post-economic reform period using the secondary data published by Ministry of Human Resource Development, University Grants Commission and All India Council for Technical Education. Particularly, this article has focused on three important dimensions of engineering and…

  5. Current Trends in Aerospace Engineering Education on Taiwan.

    Hsieh, Sheng-Jii

    A proposal for current trends in Aerospace Engineering Education on Taiwan has been drawn from the suggestions made after a national conference of "Workshop on Aerospace Engineering Education Reform." This workshop was held in January 18-20, 1998, at the Institute of Aeronautics and Astronautics, National Cheng Kung University, Tainan,…

  6. Notes on Advanced Engineering Education

    Klimenko, A. Y.

    2017-01-01

    This article reviews history, analyses principles and presents a modern interpretation of advanced engineering education (AEE). AEE originated in France, was adapted in Germany and reached its zenith in the second half of the twentieth century as part of technological efforts induced by the space race. AEE is an enhanced form of education aimed at…

  7. Innovative Technology in Engineering Education.

    Fishwick, Wilfred

    1991-01-01

    Discusses the impact that computer-assisted technologies, including applications to software, video recordings, and satellite broadcasts, have had upon the conventions and procedures within engineering education. Calls for the complete utilization of such devices through their appropriate integration into updated education activities effectively…

  8. DESTRUCTIVE EDUCATIONAL PRACTICES AT UNIVERSITY

    Андрей Владимирович Феоктистов

    2013-05-01

    Full Text Available The article is devoted to problems of origin and development of destructive educational practices at university. The authors focus on complex of interactions that disturb the existing in the academic environment norms and ethical principles. The most vivid evidence of destructive educational practice is the corruption issue. On the basis of the analyzed publications dealing with dynamics of corruption in the Russian higher education and the results of the survey by questionnaire, carried out at the technical university, the complex of recommendations has been prepared and suggested that is directed at minimization of destructive behavior at university.DOI: http://dx.doi.org/10.12731/2218-7405-2013-4-28

  9. The changing face of nuclear engineering education

    Poston, J.W.

    1991-01-01

    Nuclear engineering education in the US is in a near-crisis situation. Most academic programs are small with limited enrollments and faculty. Some of these programs are being absorbed into larger academic units, while others are being terminated. The number of identifiable academic programs has dropped dramatically over the last several years, and there is genuine concern that this downward trend will continue. The recent report by the National Academy of Sciences highlights the problems, needs, and prospects for nuclear engineering education in this country. At the same time, some programs appear to be relatively healthy and somewhat secure. A closer look at these programs indicates that there has been an evolution in the approach taken by these survivors toward both their academic and research programs. This paper discusses the approaches taken at Texas A and M University over the last 8 to 10 years to strengthen the Department of Nuclear Engineering

  10. Quality assurance and accreditation of engineering education in Jordan

    Aqlan, Faisal; Al-Araidah, Omar; Al-Hawari, Tarek

    2010-06-01

    This paper provides a study of the quality assurance and accreditation in the Jordanian higher education sector and focuses mainly on engineering education. It presents engineering education, accreditation and quality assurance in Jordan and considers the Jordan University of Science and Technology (JUST) for a case study. The study highlights the efforts undertaken by the faculty of engineering at JUST concerning quality assurance and accreditation. Three engineering departments were accorded substantial equivalency status by the Accreditation Board of Engineering and Technology in 2009. Various measures of quality improvement, including curricula development, laboratories improvement, computer facilities, e-learning, and other supporting services are also discussed. Further assessment of the current situation is made through two surveys, targeting engineering instructors and students. Finally, the paper draws conclusions and proposes recommendations to enhance the quality of engineering education at JUST and other Jordanian educational institutions.

  11. Problems of engineering education and their decision involving industry

    R. P. Simonyants

    2014-01-01

    In Russia, the problems of engineering education are connected with political and economic upheavals of the late last century. At the same time, some leading engineering universities in Russia, such as the Bauman Moscow State Technical University (BMSTU) were resistant to the damaging effects of the crisis. But the methodology and experience of their effective work are insufficiently known.The problems of international engineering school development are also known. The first UNESCO World Repo...

  12. University Festival Promotes STEM Education

    Quagliata, Andrew B.

    2015-01-01

    STEM education is argued as an essential ingredient in preparing our children for careers of the future. This study describes a university festival that includes the promotion of STEM-related career interests in young people among its goals. A total of 203 participants between the age of 7 and 17 completed both pre-event and post-event surveys. In…

  13. Educating Engineers for Sustainable Development

    Myrdal, Christina Grann; Holgaard, Jette Egelund

    In this paper, we explore the potentials of designing engineering education activities for sustainability development based on how environmental concerns are integrated into product development processes in a company context. First we draw on a case study from the Danish company Grundfos Management...... A/S and based on their experience with product development practise and competence development of product developers, we propose a set of competences to be addressed in engineering education for sustainable development (EESD). Furthermore, we use the problem based learning philosophy as a base...

  14. Engineering Education for a New Era

    Ohgaki, Shinichiro

    Engineering education is composed of five components, the idea what engineering education ought to be, the knowledge in engineering fields, those who learn engineering, those who teach engineering and the stakeholders in engineering issues. The characteristics of all these five components are changing with the times. When we consider the engineering education for the next era, we should analyze the changes of all five components. Especially the knowledge and tools in engineering fields has been expanding, and advanced science and technology is casting partly a dark shadow on the modern convenient life. Moral rules or ethics for developing new products and engineering systems are now regarded as most important in engineering fields. All those who take the responsibility for engineering education should understand the change of all components in engineering education and have a clear grasp of the essence of engineering for sustainable society.

  15. Preparing University Students to Lead K-12 Engineering Outreach Programmes: A Design Experiment

    Anthony, Anika B.; Greene, Howard; Post, Paul E.; Parkhurst, Andrew; Zhan, Xi

    2016-01-01

    This paper describes an engineering outreach programme designed to increase the interest of under-represented youth in engineering and to disseminate pre-engineering design challenge materials to K-12 educators and volunteers. Given university students' critical role as facilitators of the outreach programme, researchers conducted a two-year…

  16. Engineering Ethics at the Catholic University of Lille (France): Research and Teaching in a European Context.

    Didier, Christelle

    2000-01-01

    Discusses the development of non-technical education and ethics in engineering curricula in Europe and particularly in France. Investigates two projects at the Catholic University of Lille. The first project is an engineering ethics course and the second has to do with writing a European handbook on engineering ethics as a discipline. (Contains 28…

  17. Computing in Hydraulic Engineering Education

    Duan, J. G.

    2011-12-01

    Civil engineers, pioneers of our civilization, are rarely perceived as leaders and innovators in modern society because of retardations in technology innovation. This crisis has resulted in the decline of the prestige of civil engineering profession, reduction of federal funding on deteriorating infrastructures, and problems with attracting the most talented high-school students. Infusion of cutting-edge computer technology and stimulating creativity and innovation therefore are the critical challenge to civil engineering education. To better prepare our graduates to innovate, this paper discussed the adaption of problem-based collaborative learning technique and integration of civil engineering computing into a traditional civil engineering curriculum. Three interconnected courses: Open Channel Flow, Computational Hydraulics, and Sedimentation Engineering, were developed with emphasis on computational simulations. In Open Channel flow, the focuses are principles of free surface flow and the application of computational models. This prepares students to the 2nd course, Computational Hydraulics, that introduce the fundamental principles of computational hydraulics, including finite difference and finite element methods. This course complements the Open Channel Flow class to provide students with in-depth understandings of computational methods. The 3rd course, Sedimentation Engineering, covers the fundamentals of sediment transport and river engineering, so students can apply the knowledge and programming skills gained from previous courses to develop computational models for simulating sediment transport. These courses effectively equipped students with important skills and knowledge to complete thesis and dissertation research.

  18. Engineering Technology Education: Bibliography, 1988.

    Dyrud, Marilyn A.

    1989-01-01

    Lists articles and books related to engineering technology education published in 1988. Items are grouped administration, aeronautical, architectural, CAD/CAM, civil, computers, curriculum, electrical/electronics, industrial, industry/government/employers, instructional technology, laboratories, lasers, liberal studies, manufacturing, mechanical,…

  19. Mechatronics Engineering Education in India

    Bajpai, Shrish; Khare, Sushant

    2015-01-01

    Present paper aims to give an insight in the field of Mechatronics, specifically its standard of education in India. We have investigated this field right from its origin. We have analyzed how it expanded as a proper discipline of engineering and in which direction the development in this field is going now and, at the same time, its status of…

  20. What Unites Us All: Establishing Special Education Teacher Education Universals

    Darling, Sharon M.; Dukes, Charles; Hall, Kalynn

    2016-01-01

    The theoretical base that supports human universals served as a model for proposing special education teacher education universals. The human universals model is explained and put forth as a basis for identifying special education teacher education universals. Twenty-four English language journals from different countries representing four…

  1. Biomedical engineering education--status and perspectives.

    Magjarevic, Ratko; Zequera Diaz, Martha L

    2014-01-01

    Biomedical Engineering programs are present at a large number of universities all over the world with an increasing trend. New generations of biomedical engineers have to face the challenges of health care systems round the world which need a large number of professionals not only to support the present technology in the health care system but to develop new devices and services. Health care stakeholders would like to have innovative solutions directed towards solving problems of the world growing incidence of chronic disease and ageing population. These new solutions have to meet the requirements for continuous monitoring, support or care outside clinical settlements. Presence of these needs can be tracked through data from the Labor Organization in the U.S. showing that biomedical engineering jobs have the largest growth at the engineering labor market with expected 72% growth rate in the period from 2008-2018. In European Union the number of patents (i.e. innovation) is the highest in the category of biomedical technology. Biomedical engineering curricula have to adopt to the new needs and for expectations of the future. In this paper we want to give an overview of engineering professions in related to engineering in medicine and biology and the current status of BME education in some regions, as a base for further discussions.

  2. Engineering education in the period with rapid change; Henkakuki no kogaku kyoiku

    Hirata, Y. [Osaka University, Osaka (Japan)

    2000-01-05

    The Accreditation Examination Committee of engineering education was established in 1997 in the Japan Engineering Education Society, and the International Universal Engineer Review Board was established in the Japan Engineering Education Society and the Japan Engineering Society in 1998. A series of the activities was connected to the establishment of 'Japan Accreditation Board for Engineering Education' (JABEE). To adapt to the movements, the Educational Program Review Board in the Engineering was installed in 1997 mainly composed of directors of engineering departments of 8 national universities. This Board arranges the contents of engineering education in the orders as follows, and studies on this base are being promoted. (1) Static (engineering basic knowledge, engineering special knowledge, expert skill), (2) Dynamic (search, design, analysis and application, synthesis and comprehension), (3) Mental 1 (External: Negotiation ability, persuasion linguistic ability, language ability, positiveness cooperativeness, etc.), (4) Mental 2 (world view, engineering ethics, sense of responsibility, self-development, economy sense, international sense, etc.). (NEDO)

  3. Engineering Education Research in "European Journal of Engineering Education" and "Journal of Engineering Education": Citation and Reference Discipline Analysis

    Wankat, Phillip C.; Williams, Bill; Neto, Pedro

    2014-01-01

    The authors, citations and content of "European Journal of Engineering Education" ("EJEE") and "Journal of Engineering Education" ("JEE") in 1973 ("JEE," 1975 "EJEE"), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become…

  4. An institutional approach to university mathematics education:

    Winsløw, Carl; Barquero, Berta; De Vleeschouwer, Martine

    2014-01-01

    University mathematics education (UME) is considered, in this paper, as a kind of didactic practice – characterised by institutional settings and by the purpose of inducting students into mathematical practices. We present a research programme – the anthropological theory of the didactic (ATD......) – in which this rough definition can be made much more precise; we also outline some cases of ATD-based research on UME. Three cases are presented in more detail. The first is a theoretical and empirical study of the topic of dual vector spaces, as it appears in undergraduate courses on linear algebra...... for engineering students....

  5. The university, social education and the education of social educator

    Irandi Pereira

    2012-12-01

    Full Text Available This article discusses the relations between university and social education and their developments in the social educator education supported by an education conception linked to the collective rights. This article emphasizes the relations between theory and the social education actions, the social educator continual education, according to three focus: Brazilian higher education aspects, the call for a more general education towards the demands resulting from the contemporary context, in which the formal education, in its different levels, cannot answer the low income adults, youngsters and children solicitations and yet the requests needed for the social educator continual education. The readings have shown that the debate is insufficient in face of the social education experiences carried out in national and international scenarios. It is a field to be effectively established.

  6. Engineering Encounters: Teaching Educators about Engineering

    Tank, Kristina M.; Raman, D. Raj; Lamm, Monica H.; Sundararajan, Sriram; Estapa, Anne

    2017-01-01

    This column presents ideas and techniques to enhance science teaching. This month's issue describes preservice elementary teachers learning engineering principles from engineers. Few elementary teachers have experience with implementing engineering into the classroom. While engineering professional development opportunities for inservice teachers…

  7. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1996

    1997-08-01

    This report summarizes research and educational activities, operation status of the research facilities of the Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo on fiscal year 1996. This facility has four major research facilities such as fast neutron source reactor 'Yayoi', electron Linac, fundamental experiment facility for nuclear fusion reactor blanket design and high fluence irradiation facility(HIT). Education and research activities are conducted in a wide fields of nuclear engineering using these facilities. The former two facilities are available for various studies by universities all over Japan, facility for nuclear fusion reactor blanket design is utilized for research within the Faculty of Engineering and HIT is used for the research within the University of Tokyo. The facility established a plan to reorganized into a nation wide research collaboration center in fiscal year 1995 and after further discussion of a future program it is decided to hold 'Nuclear energy symposium' periodically after fiscal year 1997 as a part of the activity for appealing the research results to the public. (G.K.)

  8. Ethics Education In The University

    Nguyen K. Q. Trung

    2015-08-01

    Full Text Available Accounting faculty of universities in Vietnam takes an important role in the training of human resources for the society in the field of accounting auditing and taxation. All professors and lecturers who teaching in those faculties have participated in editing and changing the accounting curricular in order to meet the needs of the market labor and requirements of new internationally professional standards. The integration of professional ethics into the curriculum has raised the concern of many universities not only in Vietnam but also in the world. This paper presents the study on teaching and learning of professional ethics at Faculty of Accounting and Auditing of Banking University of HCMC. The results of the study do highlight some recommendations for improving the contents of courses used for the teaching and learning accounting effectively. The research is presented in this paper as follows a short literature review and then the methodology of interviewing the professors in accounting fields who have the best experiences in education of accounting. Also students who are studying accounting course will be interviewed. In addition to content Analysis research methods and a case study approach are used to investigate the whether it is necessary for teaching and learning of Professional Ethics in accounting at Banking University of HCMC. The paper aims to answer the following questions i Should ethics be taught in accounting classes at universities ii How professional ethics has been taught and learned as a separate course or integration into different accounting and auditing courses

  9. Sustainability in Design Engineering Education; Experiences in Northern Europe

    Dewulf, K.; Wever, R.; Boks, C.; Bakker, C.; D'hulster, F.

    2009-01-01

    In recent years, the implementation of sustainability into the curricula of engineering has become increasingly important. This paper focuses on the experiences of integrating sustainability in Design Engineering education in the academic bachelor programs at Delft University of Technology in The

  10. Incorporating Six Sigma Methodology Training into Chemical Engineering Education

    Dai, Lenore L.

    2007-01-01

    Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

  11. Preparing students for workplace learning in higher engineering education

    Dehing, A.J.M.

    2012-01-01

    Student preparation for professional practice is an important course aim in the education of engineers by the universities of applied sciences (Geurts & Meijers, 2004; Sheppard, et al., 2008; Sullivan & Rosin, 2008). Since the start of the professional engineering schools at the beginning of the

  12. Chemical engineering and chemistry : education in a changing world

    Reijenga, J.C.

    2006-01-01

    Current trends in science and engineering research are analyzed, together with an inventory of changes in the field of employment and practice in industry. The resulting demands on university education of chemists and chemical engineers have been translated into a more or less continuous updating of

  13. Multidisciplinary Graduate Education in Bioprocess Engineering

    Mark A. Eiteman

    2006-04-18

    This report describes the accomplishments of the University of Georgia in establishing an academic program geared toward the emerging biobased products industry. By virtue of its strengths and structure, the University of Georgia is particularly well-suited for developing a program focused on plant- and microbial-based bioproducts, and it was in this general area that this program was developed. The program had several unique characteristics. First, we implemented a distinguished lecture series that brought outstanding scientists and engineers to our University to interact with students and share their vision of the biobased economy. Second, we offered industrially-oriented and multidisciplinary courses that provided students with a broad background on various facets of biobased business and technology. Third, we provided the students with opportunities to expand beyond the classroom by engaging in research lab rotations and industrial internships. Fourth, each student was engaged in a creative research project as led by a multidisciplinary faculty team. Throughout the implementation of these activities, we maintained a student-centered, mentoring approach to education. The most tangible outcome of this project was the graduation of two students who participated in a variety of scholarly activities, culminating in research toward the completion of a thesis and dissertation. Both research projects involved the use of microorganisms to produce industrial products from agricultural substrates via fermentation processes. The research advanced our understanding of microorganisms as used for industrial processes and products, as described in several articles published in scholarly journals and presentations made at scientific conferences (see information on pp. 14-15). Another outcome is one graduate course, Fermentation Engineering Laboratory, which is a unique experiential and multidisciplinary course. This course will be offered in the future as an elective to

  14. Association of African Universities : Education and Research ...

    Association of African Universities : Education and Research Networking Unit. The Association of African Universities (AAU), headquartered in Accra, Ghana, is an international nongovernmental organization (NGO) that promotes cooperation between African universities and with the international community.

  15. Guidelines for Engineering Teachers Concerning Educating the Engineer for Innovative and Entrepreneurial Activity.

    Eekels, J.

    1987-01-01

    Emphasizes that the concept of design is fundamental in innovation. Outlines the work of the European Society for Engineering Education-Working group on Innovation. Describes the innovation-management stream in the curriculum of the faculty of Industrial Design Engineering at Delft University of Technology, Netherlands. (CW)

  16. Feminist Methodologies and Engineering Education Research

    Beddoes, Kacey

    2013-01-01

    This paper introduces feminist methodologies in the context of engineering education research. It builds upon other recent methodology articles in engineering education journals and presents feminist research methodologies as a concrete engineering education setting in which to explore the connections between epistemology, methodology and theory.…

  17. Paired peer learning through engineering education outreach

    Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

    2017-01-01

    Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

  18. Education in the nuclear sciences at Japanese universities

    Takashima, Y.

    1990-01-01

    Though there are 430 government and private universities in Japan, only a limited number of them have the department associated with nuclear science education. And the education is one-sided to government universities because mainly of financial problem. Nuclear engineering departments are installed at only 7 big universities. In addition, there are 3 institutes associated with a nuclear reactor. In these facilities, education on reactor physics, radiation measurement, electromagnetics and material sciences are conducted. For education on safety handling of radioactive materials, 10 radioisotope centers and 7 radiochemistry laboratories attached to big government universities act an important role. Almost all of the financial support for the above nuclear education come from the Ministry of Education, Science and Culture. However, some other funds are introduced by the private connection of professors

  19. Education in the nuclear sciences in Japanese universities

    Takashima, Y.

    1993-01-01

    Although there are 430 governmental and private universities in Japan, only a limited number of them have departments associated with nuclear science education. Moreover, mainly because of financial pressures, this association is often limited to government universities. Nuclear engineering departments are incorporated with only seven of larger universities, and there are three institutes with nuclear reactors. In these facilities, education in reactor physics, radiation measurements, electromagnetic and material sciences, are conducted. In terms of radiation safety and radiological health physics, ten radioisotope centers and seven radiochemistry laboratories in universities play an important role. (author) 8 figs.; 5 tabs

  20. From Engineer to Entrepreneur - Entrepreneurship Education for Engineering Students: The Case of the Entrepreneurial Campus Villach

    Patrick Holzmann

    2018-05-01

    Full Text Available Entrepreneurship education is quite a novel phenomenon that is gaining increasing importance in academia and practice alike. Entrepreneurship education aims to provide the necessary skills and knowledge that enable students to successfully found a new venture. Hitherto entrepreneurship education has not received much attention in engineering pedagogy. This finding is quite surprising because through proper entrepreneurship education engineers can be enabled to exploit entrepreneurial opportunities that result from technological innovation. Thus, we argue that entrepreneurship education should be a cornerstone in engineering education. The paper introduces the ‘Entrepreneurial Campus Villach’ located at the Carinthia University of Applied Sciences (CUAS. The campus is among the first in Austria that provide an extensive and scientifically sound entrepreneurship program. The campus focusses on the four core areas 1 research, 2 teaching, 3 coaching and support, and 4 infrastructure. The paper provides insights for other university and institutions that aim to set up similar concepts.

  1. Chemical Engineering Education in a Bologna Three Cycle Degree System

    Gani, Rafiqul

    For the purpose of harmonization of European higher education, Europe’s education system has been going through major changes under what is commonly known as the ”Bologna Process”. The Bologna declaration in 1999 was the start of the introduction of a three cycle degree system in higher education...... in Europe. To date, many European universities have adopted this degree structure. The Working Party on Education (WPE) of the European Federation of Chemical Engineering (EFCE) carried out research to determine the contents of higher education in chemical engineering (ChE) and related disciplines...... such as applied chemistry and process engineering throughout Europe. The result has been a set of recommendations for the first (BS), second (MS) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

  2. Rethinking engineering education the CDIO approach

    Crawley, Edward F; Östlund, Sören; Brodeur, Doris R; Edström, Kristina

    2014-01-01

    This book describes an approach to engineering education that integrates a comprehensive set of personal, interpersonal, and professional engineering skills with engineering disciplinary knowledge in order to prepare innovative and entrepreneurial engineers.  The education of engineers is set in the context of engineering practice, that is, Conceiving, Designing, Implementing, and Operating (CDIO) through the entire lifecycle of engineering processes, products, and systems. The book is both a description of the development and implementation of the CDIO model and a guide to engineering programs worldwide that seek to improve the education of young engineers.   Provides an overview of the CDIO approach, then chapters organized according to the CDIO Standards; Includes in each chapter objectives, discussion questions, case studies and clear diagrams to support key concepts and processes; Avoids the jargon of education specialists and clearly explains education terms in the context of their initial presentatio...

  3. Transforming Engineering Education - For Innovation and Development

    Marjoram, Tony

    2013-01-01

    Engineering and technology are of vital importance in innovation, social and economic development in higher and lower income countries. Development is driven by engineering applications and infrastructure, and most innovations derive from engineering. The last 50 years has seen significant change...... of young people in engineering, and the need to develop policy perspectives on the transformation of engineering education....... in knowledge production, dissemination and application, and associated needs for engineering, and yet engineering education has changed little over this period. This paper discusses the important role of problem-based learning and humanitarian engineering in promoting the interest, enrolment and retention...

  4. Integrating standardization into engineering education: the case of forerunner Korea

    D.G. Choi (Dong Geun); H.J. de Vries (Henk)

    2013-01-01

    textabstractThe Republic of Korea is a forerunner in integrating the topic of standardization into engineering education at the academic level. This study investigates developments and evolutions in the planning and operating of the University Education Promotion on Standardization (UEPS) in Korea.

  5. Integration of Sustainable Development in Sanitary Engineering Education in Sweden

    Rydhagen, B.; Dackman, C.

    2011-01-01

    In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering…

  6. Linking Civil Engineering Education And Research With Industry (Session Keynote)

    Virdi, Kuldeep

    Linking engineering education with industry has been a basic aim of educators almost from the beginning of modern degree programmes. In the USA, reference is often made to ‘co-operative education’, where students spend periods in industry within the duration of their stay in a university. Indeed...

  7. Targeted initiatives. Support for nuclear engineering education in the USA

    Gutteridge, John

    2001-01-01

    Recruitment and education of a new generation of nuclear engineers stands to benefit in the USA from a range of programmes involving governmental bodies, universities, and industry groups. They are part of efforts to attract more students to consider and prepare for careers in the nuclear industry, and to provide financial support for nuclear research and education. Career prospects in the nuclear field are brightening. The demand for nuclear engineers and nuclear trained personnel is on the rise as the new century opens. During the past year several studies were completed in an attempt to ascertain the problems in nuclear engineering education and define initiatives to address these problems

  8. How Soft are “Soft Skills” in Engineering Educations?

    Bruun-Pedersen, Jon Ram; Kofoed, Lise

    2015-01-01

    Engineering education communities have long recognized that graduates not only need to poses technical knowledge in their chosen disciplines, but also need to be better educated in areas of communication skills, teamwork and leadership. Several studies mention these so-called “soft” skills...... as increasingly important for future engineers. Such skills include communication, cooperation, creativity, leadership and organization. For many years, the engineering educations at Aalborg University have been working with the Problem Based and Project Organized Learning pedagogical approach. An important part...

  9. Learning analytics for smart campus: Data on academic performances of engineering undergraduates in Nigerian private university

    Segun I. Popoola

    2018-04-01

    Full Text Available Empirical measurement, monitoring, analysis, and reporting of learning outcomes in higher institutions of developing countries may lead to sustainable education in the region. In this data article, data about the academic performances of undergraduates that studied engineering programs at Covenant University, Nigeria are presented and analyzed. A total population sample of 1841 undergraduates that studied Chemical Engineering (CHE, Civil Engineering (CVE, Computer Engineering (CEN, Electrical and Electronics Engineering (EEE, Information and Communication Engineering (ICE, Mechanical Engineering (MEE, and Petroleum Engineering (PET within the year range of 2002–2014 are randomly selected. For the five-year study period of engineering program, Grade Point Average (GPA and its cumulative value of each of the sample were obtained from the Department of Student Records and Academic Affairs. In order to encourage evidence-based research in learning analytics, detailed datasets are made publicly available in a Microsoft Excel spreadsheet file attached to this article. Descriptive statistics and frequency distributions of the academic performance data are presented in tables and graphs for easy data interpretations. In addition, one-way Analysis of Variance (ANOVA and multiple comparison post-hoc tests are performed to determine whether the variations in the academic performances are significant across the seven engineering programs. The data provided in this article will assist the global educational research community and regional policy makers to understand and optimize the learning environment towards the realization of smart campuses and sustainable education. Keywords: Smart campus, Learning analytics, Sustainable education, Nigerian university, Education data mining, Engineering

  10. Engineering education research: Impacts of an international network of female engineers on the persistence of Liberian undergraduate women studying engineering

    Rimer, Sara; Reddivari, Sahithya; Cotel, Aline

    2015-11-01

    As international efforts to educate and empower women continue to rise, engineering educators are in a unique position to be a part of these efforts by encouraging and supporting women across the world at the university level through STEM education and outreach. For the past two years, the University of Michigan has been a part of a grassroots effort to encourage and support the persistence of engineering female students at University of Liberia. This effort has led to the implementation of a leadership camp this past August for Liberian engineering undergraduate women, meant to: (i) to empower engineering students with the skills, support, and inspiration necessary to become successful and well-rounded engineering professionals in a global engineering market; and (ii) to strengthen the community of Liberian female engineers by building cross-cultural partnerships among students resulting in a international network of women engineers. This session will present qualitative research findings on the impact of this grassroots effort on Liberian female students? persistence in engineering, and the future directions of this work.

  11. The Fourth Revolution: Educating Engineers for Leadership.

    Mark, Hans; Carver, Larry

    1988-01-01

    Urges a change in engineering education for developing leaders. Describes three previous revolutions in American higher education which responded to the needs of the community. Suggests lifelong education as the fourth revolution. (YP)

  12. Business oriented educational experiments enhance active learning by engineering students

    Christiansen, Nynne Mia; Schjær-Jacobsen, Hans; Simon, Jens

    2012-01-01

    It is generally agreed that one of the keys to recreating industrial growth after the financial crisis is to mobilize universities and engineering schools to be more actively involved in innovation and entrepreneurship activities in cooperation with industrial companies. This active learning...... exploration symposium on bridging the gap between engineering education and business is proposed on the basis of the Copenhagen University College of Engineering (IHK) being involved in a DKK 50m ongoing project “Business Oriented Educational Experiments” financed by the Capital Region of Denmark...... and the European Social Fund. The project is carried out with other major educational institutions in the Copenhagen area and organized in five themes: 1) world class competences, 2) new interactions between education and business, 3) the experimenting organization, 4) education on demand, and 5) new career paths...

  13. Distance Teaching of Environmental Engineering Courses at the Open University.

    Porteous, Andrew; Nesaratnam, Suresh T.; Anderson, Judith

    1997-01-01

    Describes two integrated distance learning environmental engineering degree courses offered by the environmental engineering group of the Open University in Great Britain. Discusses admission requirements for courses, advantages offered by distance learning, professional accreditation, site visits, and tutors. (AIM)

  14. Modeling student success in engineering education

    Jin, Qu

    student's first year of college was about a half of a grade point for both models. The predictors of retention and cumulative GPA while being similar differ in that high school academic metrics play a more important role in predicting cumulative GPA with the affective measures playing a more important role in predicting retention. In the last investigation, multi-outcome neural network models were used to understand and to predict engineering students' retention, GPA, and graduation from entry to departure. The participants were more than 4000 engineering students (cohort years 2004 - 2006) enrolled in a large Midwestern university. Different patterns of important predictors were identified for GPA, retention, and graduation. Overall, this research explores the feasibility of using modeling to enhance a student's educational experience in engineering. Student success modeling was used to identify the most important cognitive and affective predictors for a student's first calculus course retention, GPA, and graduation. The results suggest that the statistical modeling methods have great potential to assist decision making and help ensure student success in engineering education.

  15. The assessment of learning in engineering education practice and policy

    Heywood, John

    2016-01-01

    Explores how we judge engineering education in order to effectively redesign courses and programs that will prepare new engineers for various professional and academic careers This book considers the functions of assessment and its measurement in engineering education. Chapters two through three discuss efforts toward alternative curriculum in engineering and advanced level exams for university entry in engineering science. Chapter four reviews investigations of what engineers do at work and their implications assessment. Chapter five records the development of competency based assessment and considers its implications for the engineering curriculum. Chapter six discusses the impact of the accrediting authorities on assessment, outcomes based assessment, taxonomies and assessment in mastery and personalized systems of instruction. Chapters seven through eight consider student variability (e.g. intellectual development, emotional intelligence) and reflective practice. Questio s are raised about the assessment...

  16. Current Status of Engineering Education in America

    Barr, Ronald E.

    Many faculty believe that engineering education in America is at a crossroads and much change is needed. International competition in engineering and the global economy have major potential impact on the engineering workforce of the future. We must find ways to educate U.S. engineers to be competitive and creative contributors in the worldwide arena. Recent national reports are sounding the alarm that the U.S. is losing it leadership in technology and innovation, with consequences for economic prosperity and national security. The report Rising Above the Gathering Storm discusses this dilemma in detail and offers four recommendations to U.S. policymakers. The report Educating the Engineer of 2020 discusses new ways to prepare American engineers for the 21st Century. Furthermore, changes in ABET accreditation, along with new paradigms of teaching and new technology in the classroom, are changing the scholarship of engineering education. We must find ways to promote change in engineering faculty for this new opportunity in engineering educational scholarship. Future engineering students are now in K-12, which is becoming an increasingly diverse population that in the past has not been fully represented in engineering education. Current trends show disaffection for pursuing studies in science and engineering in the youth of our U.S. society. We must find new ways to portray engineering as an exciting and rewarding career, and certainly as an educational platform for professional careers beyond the baccalaureate degree.

  17. Educating Civil Engineers for Developing Countries

    Stanley, D.

    1974-01-01

    Based on engineering teaching experience in Africa and Asia, ideas are presented on educating civil engineers for developing countries, especially those in Africa. Some of the problems facing educational planners, teachers, and students are addressed, including responsibilities of a newly graduated civil engineer, curriculum development, and…

  18. Engineering education research in European Journal of Engineering Education and Journal of Engineering Education: citation and reference discipline analysis

    Wankat, Phillip C.; Williams, Bill; Neto, Pedro

    2014-01-01

    The authors, citations and content of European Journal of Engineering Education (EJEE) and Journal of Engineering Education (JEE) in 1973 (JEE, 1975 EJEE), 1983, 1993, 2003, and available 2013 issues were analysed. Both journals transitioned from house organs to become engineering education research (EER) journals, although JEE transitioned first. In this process the number of citations rose, particularly of education and psychology sources; the percentage of research articles increased markedly as did the number of reference disciplines. The number of papers per issue, the number of single author papers, and the citations of science and engineering sources decreased. EJEE has a very broad geographic spread of authors while JEE authors are mainly US based. A 'silo' mentality where general engineering education researchers do not communicate with EER researchers in different engineering disciplines is evident. There is some danger that EER may develop into a silo that does not communicate with technically oriented engineering professors.

  19. Investigating the Language of Engineering Education

    Variawa, Chirag

    A significant part of professional communication development in engineering is the ability to learn and understand technical vocabulary. Mastering such vocabulary is often a desired learning outcome of engineering education. In promoting this goal, this research investigates the development of a tool that creates wordlists of characteristic discipline-specific vocabulary for a given course. These wordlists explicitly highlight requisite vocabulary learning and, when used as a teaching aid, can promote greater accessibility in the learning environment. Literature, including work in higher education, diversity and language learning, suggest that designing accessible learning environments can increase the quality of instruction and learning for all students. Studying the student/instructor interface using the framework of Universal Instructional Design identified vocabulary learning as an invisible barrier in engineering education. A preliminary investigation of this barrier suggested that students have difficulty assessing their understanding of technical vocabulary. Subsequently, computing word frequency on engineering course material was investigated as an approach for characterizing this barrier. However, it was concluded that a more nuanced method was necessary. This research program was built on previous work in the fields of linguistics and computer science, and lead to the design of an algorithm. The developed algorithm is based on a statistical technique called, Term Frequency-Inverse Document Frequency. Comparator sets of documents are used to hierarchically identify characteristic terms on a target document, such as course materials from a previous term of study. The approach draws on a standardized artifact of the engineering learning environment as its dataset; a repository of 2254 engineering final exams from the University of Toronto, to process the target material. After producing wordlists for ten courses, with the goal of highlighting characteristic

  20. Mechanical Engineering at RWTH Aachen University: Professional Curriculum Development and Teacher Training

    Henning, Klaus; Bornefeld, Gero; Brall, Stefan

    2007-01-01

    This paper offers a multi-perspective view on engineering education at RWTH Aachen University: curriculum design, examples of newly developed teaching methods for engineering curricula, and teaching competencies and teacher qualification. It is based on the theories of student-centred learning, project learning, social skills, etc., but the paper…

  1. Teaching Sustainable Entrepreneurship to Engineering Students: The Case of Delft University of Technology

    Bonnet, Hans; Quist, Jaco; Hoogwater, Daan; Spaans, Johan; Wehrmann, Caroline

    2006-01-01

    Sustainability, enhancement of personal skills, social aspects of technology, management and entrepreneurship are of increasing concern for engineers and therefore for engineering education. In 1996 at Delft University of Technology this led to the introduction of a subject on sustainable entrepreneurship and technology in the course programmes of…

  2. Quality Assurance of University Education: Whose Responsibility?

    Ibijola, Elizabeth Yinka

    2015-01-01

    This study sought the opinion of stakeholders in university education, to know who should be responsible for quality assurance of university education in Nigeria. Descriptive research of survey design was employed in the study. The population consisted of all public university staff members, students and the employers of Nigerian university…

  3. University Students' Attitudes toward Physical Education Teaching

    Li, Fengjuan; Chen, Junjun; Baker, Miles

    2014-01-01

    While there have been many studies into students' attitudes toward Physical Education at the school level, far fewer studies have been conducted at the university level, especially in China. This study explored 949 students' attitudes toward their university Physical Education experiences in four Chinese universities. An intercorrelated model of…

  4. Various advanced design projects promoting engineering education

    1994-01-01

    The Universities Space Research Association (USRA) Advanced Design Program (ADP) program promotes engineering education in the field of design by presenting students with challenging design projects drawn from actual NASA interests. In doing so, the program yields two very positive results. Firstly, the students gain a valuable experience that will prepare them for design problems with which they will be faced in their professional careers. Secondly, NASA is able to use the work done by students as an additional resource in meeting its own design objectives. The 1994 projects include: Universal Test Facility; Automated Protein Crystal Growth Facility; Stiffening of the ACES Deployable Space Boom; Launch System Design for Access to Space; LH2 Fuel Tank Design for SSTO Vehicle; and Feed System Design for a Reduced Pressure Tank.

  5. The Sooner Lunar Schooner: Lunar engineering education

    Miller, D. P.; Hougen, D. F.; Shirley, D.

    2003-06-01

    The Sooner Lunar Schooner is a multi-disciplinary ongoing project at the University of Oklahoma to plan, design, prototype, cost and (when funds become available) build/contract and fly a robotic mission to the Moon. The goal of the flight will be to explore a small section of the Moon; conduct a materials analysis of the materials left there by an Apollo mission thirty years earlier; and to perform a selenographic survey of areas that were too distant or considered too dangerous to be done by the Apollo crew. The goal of the Sooner Lunar Schooner Project is to improve the science and engineering educations of the hundreds of undergraduate and graduate students working on the project. The participants, while primarily from engineering and physics, will also include representatives from business, art, journalism, law and education. This project ties together numerous existing research programs at the University, and provides a framework for the creation of many new research proposals. The authors were excited and motivated by the Apollo missions to the Moon. When we asked what we could do to similarly motivate students we realized that nothing is as exciting as going to the Moon. The students seem to agree.

  6. Epistemic Practices of Engineering for Education

    Cunningham, Christine M.; Kelly, Gregory J.

    2017-01-01

    Engineering offers new educational opportunities for students, yet also poses challenges about how to conceptualize the disciplinary core ideas, crosscutting concepts, and science and engineering practices of the disciplinary fields of engineering. In this paper, we draw from empirical studies of engineering in professional and school settings to…

  7. Universities and national laboratory roles in nuclear engineering

    Sackett, J.I.

    1991-01-01

    Nuclear Engineering Education is being significantly challenged in the United States. The decline in enrollment generally and the reduction of the number of nuclear engineering departments has been well documented. These declines parallel a lack of new construction for nuclear power plants and a decline in research and development to support new plant design. Precisely at a time when innovation is is needed to deal with many issues facing nuclear power, the number of qualified people to do so is being reduced. It is important that the University and National Laboratory Communities cooperate to address these issues. The Universities must increasingly identify challenges facing nuclear power that demand innovative solutions and pursue them. To be drawn into the technology the best students must see a future, a need and identify challenges that they can meet. The University community can provide that vision with help from the National Laboratories. It has been a major goal within the reactor development program at Argonne National Laboratory to establish the kind of program that can help accomplish this

  8. Sustainability in engineering programs in a Portuguese Public University

    Ciliana Regina Colombo

    Full Text Available Abstract Rethink the interventions, human practices and their effects on the natural environment, for the preservation of life and biodiversity, threatened by the capitalist model of production, consumption and disposal, becomes each day more indispensable. The role of universities as knowledge building space is fundamental for the insertion of the environmental approach (greening in its various fronts (education, research, extension, and management. Following the line of several types of researches about the subject, this paper aims to identify if and how the issue of sustainability (e.g. through Project-Based Learning use is taught in the various engineering programs of a Portuguese Public University. This study was carried out by a documental research based on the programs´ curricula published in the official website of the university. The engineering programs selected included integrated master, master (second cycle and doctorate (third cycle. In this study, it was identified programs that are more focused on sustainability concepts than others, so the programs were classified in three categories: strongest, medium and weakest focus.

  9. Development of engineering drawing ability for emerging engineering education

    Guo, Jian-Wen; Cao, Xiao-Chang; Xie, Li; Jin, Jian-Jun; Wang, Chu-Diao

    2017-09-01

    Students majoring in engineering is required by the emerging engineering education (3E) in the aspect of their ability of engineering drawing. This paper puts forward training mode of engineering drawing ability for 3E. This mode consists of three kinds of training including training in courses, training in competitions and training in actual demand. We also design the feasible implementation plan and supplies viable references to carry out the mode.

  10. Paired Peer Learning through Engineering Education Outreach

    Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

    2017-01-01

    Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and…

  11. A comprehensive program of nuclear engineering and science education

    Bereznai, G.; Lewis, B.

    2014-01-01

    The University of Ontario Institute of Technology offers undergraduate degrees in nuclear engineering, nuclear power, health physics and radiation science, graduate degrees (masters as well as doctorate) in nuclear engineering, and graduate diplomas that encompass a wide range of nuclear engineering and technology topics. Professional development programs tailored to specific utility needs are also offered, and the sharing of course material between the professional development and university education courses has strengthened both approaches to ensuring the high qualification levels required of professionals in the nuclear industry. (author)

  12. University Student Perceptions of the Relationship between University Education and the Labour Market in Egypt and Oman

    Al-Harthi, Hamood K.

    2011-01-01

    How do university students perceive the key relationship between their university education and the labour market? This article describes the perceptions that 827 Egyptian and Omani seniors--both males and females, studying commerce, education, and engineering--hold about that relationship. For these students, a major motivation for attending…

  13. Biomedical engineering undergraduate education in Latin America

    Allende, R; Morales, D; Avendano, G; Chabert, S

    2007-01-01

    As in other parts of the World, in recent times there has been an increasing interest on Biomedical Engineering (BME) in Latin America (LA). This interest grows from the need for a larger number of such specialists, originated in a spreading use of health technologies. Indeed, at many universities, biomedical engineering departments have been created, which also brought along discussions on strategies to achieve the best education possible for both undergraduate and graduate programs. In these settings, different positions were taken as regards which subject to emphasize. In such a context, this work aimed to make a survey on the 'state-of-the-art' of undergraduate BME education in LA, and to analyze the observed differences. Broadly speaking, similar education profiles are perceived in the entire continent, with main emphasis on electronics and bioinstrumentation, biology and informatics respectively. Much less relevance is given to biomechanics and biomaterials. This tendency is similar in Departments with many decades of experience or in newly opened ones

  14. Challenges, opportunities and trends in engineering education

    Rosen, M.A.

    2005-01-01

    Many challenges and opportunities face the engineering profession and engineering education. The engineering profession advances best if challenges are properly addressed, opportunities beneficially exploited and reasoned speculation made on future trends. In this article, the author presents his views on some of the challenges and opportunities facing the engineering education, and possible future trends, with the objective of fostering continued discussion of and action on these issues. This topic is of great importance because the development of engineering education is strongly influenced by the challenges and opportunities it faces and how it responds, and by anticipated future trends. (author)

  15. Open Biomedical Engineering education in Africa.

    Ahluwalia, Arti; Atwine, Daniel; De Maria, Carmelo; Ibingira, Charles; Kipkorir, Emmauel; Kiros, Fasil; Madete, June; Mazzei, Daniele; Molyneux, Elisabeth; Moonga, Kando; Moshi, Mainen; Nzomo, Martin; Oduol, Vitalice; Okuonzi, John

    2015-08-01

    Despite the virtual revolution, the mainstream academic community in most countries remains largely ignorant of the potential of web-based teaching resources and of the expansion of open source software, hardware and rapid prototyping. In the context of Biomedical Engineering (BME), where human safety and wellbeing is paramount, a high level of supervision and quality control is required before open source concepts can be embraced by universities and integrated into the curriculum. In the meantime, students, more than their teachers, have become attuned to continuous streams of digital information, and teaching methods need to adapt rapidly by giving them the skills to filter meaningful information and by supporting collaboration and co-construction of knowledge using open, cloud and crowd based technology. In this paper we present our experience in bringing these concepts to university education in Africa, as a way of enabling rapid development and self-sufficiency in health care. We describe the three summer schools held in sub-Saharan Africa where both students and teachers embraced the philosophy of open BME education with enthusiasm, and discuss the advantages and disadvantages of opening education in this way in the developing and developed world.

  16. Research on the Mode of University-Enterprise Cooperation to Promote Engineering Students' Employment

    Hui, Yan; Lihua, Sun

    2018-06-01

    The employment of university students has become a hot issue of concern to the whole society. Promoting the employment of university students is a top priority for higher education institutions. University-enterprise cooperation is an important trend in the development of modern higher education. It is also an important channel for promoting the employment of university students, especially for engineering students. Through an in-depth analysis of the status quo of employment of university graduates, this paper proposes four modes of university-enterprise cooperation to promote university graduates' employment: The post-employment cooperation model, the professional internship cooperation model, the second classroom expansion cooperation model and the enterprise-oriented recruitment model, and further proposed the countermeasures to strengthen the cooperation between university and enterprise in order to promote the employment of university students.

  17. MATHEMATICS EDUCATION FOR LOGISTICS ENGINEERING

    BÉLA ILLÉS; GABRIELLA BOGNÁR

    2012-01-01

    Mathematics is a crucial language in all engineering courses and researches where mathematical modeling, simulation and manipulation are commonly used. Engineering Mathematics courses are considered difficult courses in engineering curricula. This is reflected in engineering students’ performance at the end of each semester for these courses. Our goal is to overview a few questions on mathematics as a core subject of engineering.

  18. Progress in reforming chemical engineering education.

    Wankat, Phillip C

    2013-01-01

    Three successful historical reforms of chemical engineering education were the triumph of chemical engineering over industrial chemistry, the engineering science revolution, and Engineering Criteria 2000. Current attempts to change teaching methods have relied heavily on dissemination of the results of engineering-education research that show superior student learning with active learning methods. Although slow dissemination of education research results is probably a contributing cause to the slowness of reform, two other causes are likely much more significant. First, teaching is the primary interest of only approximately one-half of engineering faculty. Second, the vast majority of engineering faculty have no training in teaching, but trained professors are on average better teachers. Significant progress in reform will occur if organizations with leverage-National Science Foundation, through CAREER grants, and the Engineering Accreditation Commission of ABET-use that leverage to require faculty to be trained in pedagogy.

  19. Efforts by Atomic Energy Society of Japan to improve the public understanding on nuclear power. With an additional review on the present status of nuclear engineering education at universities

    Nishina, K.; Kudo, K.; Ishigure, K.; Miyazaki, K.; Kimura, I.; Madarame, H.

    1996-01-01

    On variety of recent public occasions crucial for the progress of Japanese nuclear fuel cycle, the public has expressed their incredulous and reserved attitudes toward further expansion of nuclear power utilization. The typical examples are (1) local town political votes with an issue to decide on the acceptance of a proposed nuclear power plant, ending up with a conclusion against the proposal, and (2) the local dissatisfaction expressed against a proposed, deep-underground research facility, which is intended to produce cold-simulation data on the behavior of high level waste nuclides. Realizing that the dissemination of systematic and correct informations is indispensable for gaining public understanding on the importance of energy resources and nuclear power, the Educational Committee, Atomic Energy Society of Japan (AESJ), has initiated various public relations activities since 1994. In the following we sketch such activities, namely: (1) Reviews conducted on high school textbooks. (2) A request submitted to the Government for revisions of high-school textbooks and governmental guidelines defining these textbooks. (3) Preparations of a source book on nuclear energy and radiations. In addition, (4) the review conducted on the present status of nuclear engineering education in universities over the country with and without nuclear engineering program will be given. (author)

  20. University Science and Mathematics Education in Transition

    Skovsmose, Ole; Valero, Paola; Christensen, Ole Ravn

    configuration poses to scientific knowledge, to universities and especially to education in mathematics and science. Traditionally, educational studies in mathematics and science education have looked at change in education from within the scientific disciplines and in the closed context of the classroom....... Although educational change is ultimately implemented in everyday teaching and learning situations, other parallel dimensions influencing these situations cannot be forgotten. An understanding of the actual potentialities and limitations of educational transformations are highly dependent on the network...... of educational, cultural, administrative and ideological views and practices that permeate and constitute science and mathematics education in universities today. University Science and Mathematics Education in Transition contributes to an understanding of the multiple aspects and dimensions of the transition...

  1. Dual education and industrial cooperation in electrical engineering

    Váradiné Szarka, A.

    2016-11-01

    Dual education in higher education is a new system in Hungary introduced by Mercedes Benz with cooperation of Kecskemet College. In the new system companies support certain number of students and provide them strong practical education in their field. Students applying successfully for dual education study together with non-dual students at the university, so they go through the same university courses as their non-dual colleagues, but while non-dual students’ academic year includes 2×14 weeks active semester and 2×6 weeks exam session, all over 40 weeks, dual students have 48 working weeks including study at the university and practicing at the company. The main question of the success which one is the most effective model to be applied. This paper summarises 2 models of dual education with their advantages and disadvantages and also it presents practical realization at the University of Debrecen with special attention to measurement and instrumentation. Dual education in BSc level electrical engineering course cooperates with 6 multinational companies of the region in four specialization. Dual education also has great impact to the modernisation of engineering education. Detailed study of dual education in field of instrumentation and measurement is provided in the paper.

  2. Modern mechanical engineering research, development and education

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  3. Short educational programs in optical design and engineering

    Voznesenskaya, Anna; Romanova, Galina; Bakholdin, Alexey; Tolstoba, Nadezhda; Ezhova, Kseniia

    2016-09-01

    Globalization and diversification of education in optical engineering causes a number of new phenomena in students' learning paths. Many students have an interest to get some courses in other universities, to study in international environment, to broaden not only professional skills but social links and see the sights as well etc. Participation in short educational programs (e.g. summer / winter schools, camps etc.) allows students from different universities to learn specific issues in their or in some neighbor field and also earn some ECTS for the transcript of records. ITMO University provides a variety of short educational programs in optical design and engineering oriented for different background level, such are: Introduction into optical engineering, Introduction into applied and computer optics, Optical system design, Image modeling and processing, Design of optical devices and components. Depending on students' educational background these programs are revised and adopted each time. Usually the short educational programs last 4 weeks and provide 4 ECTS. The short programs utilize a set of out-of date educational technologies like problem-based learning, case-study and distance-learning and evaluation. Practically, these technologies provide flexibility of the educational process and intensive growth of the learning outcomes. Students are satisfied with these programs very much. In their feedbacks they point a high level of practical significance, experienced teaching staff, scholarship program, excellent educational environment, as well as interesting social program and organizational support.

  4. Global network on engineering education research and expertise in PBL

    Enemark, Stig; Kolmos, Anette; Moesby, Egon

    2006-01-01

    in order to facilitate better access to and co-operation within the PBL area. One of the absolute important tasks for UCPBL is to provide evidence for the effectiveness of PBL worldwide. Thus, there is a special attempt to establish links between engineering education researchers in this field....... This involves considerations concerning what is engineering education research – and how do we promote research based staff and educational development.......The UCPBL Centre for Problem Based Learning is based at Aalborg University, Denmark, known world-wide for its successful educational approach based on problem oriented project work. Due to more than 30 years of experience in utilizing PBL-learning principles in Engineering Education, an increasing...

  5. Critical Capability Pedagogies and University Education

    Walker, Melanie

    2010-01-01

    The article argues for an alliance of the capability approach developed by Amartya Sen with ideas from critical pedagogy for undergraduate university education which develops student agency and well being on the one hand, and social change towards greater justice on the other. The purposes of a university education in this article are taken to…

  6. LEARNING MANAGEMENT SYSTEMS: ENGINEERING THE EDUCATION INDUSTRY TO EDUCATE THE INDUSTRIAL ENGINEER

    L. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: A learning management system (LMS is any infrastructure on which e-learning can be built and delivered. In this article two sides of the LMS coin are investigated: On the one side, it is argued that industrial and systems engineering skills are equally relevant for learning systems as for as for any other system. To support this argument, an analogy is drawn between the management of learning systems and the management of manufacturing systems. On the other side of the coin, the educational issues and concerns related to implementing an LMS at the University of Pretoria are investigated by means of a case study in the Industrial Engineering department. It is concluded that the industrial engineering educator is in the unique position of understanding and contributing towards the engineering of the education industry whilst educating the industrial engineer.

    AFRIKAANSE OPSOMMING: ‘n Leerbestuurstelsel (LMS is enige infrastruktuur waarop e-leer gebou en afgelewer kan word. In hierdie artikel word beide kante van die LMS muntstuk ondersoek: Aan die een kant word getoon dat bedryfsingenieursvaardighede en -beginsels ewe toepaslik is op leerstelsels as op vervaardigingstelsels. Om hierdie argument te steun word 'n analogie getrek tussen the bestuur van leerstelsels en die bestuur van vervaardigingstelsels. Aan die ander kant van die muntstuk word die opvoedkundige aspekte verbonde aan die implementering van ‘n leerbestuurstelsel (LMS aan die Universiteit van Pretoria ondersoek aan die hand van ‘n gevallestudie in die Bedryfsingenieursdepartment. Die gevolgtrekking word gemaak dat die bedryfsingenieurs-opleier in 'n unieke posisie is om die opleidingsindustrie te begryp en by dra tot the ontwikkeling daarvan terwyl die bedryfsingenieur opgelei word.

  7. Do we educate engineers that can engineer?

    Nyborg, Mads; Probst, Christian W.

    2017-01-01

    results, we decided to target students who have at least passed the first four terms, and companies that have hosted a significant number of students in the last 3 years in internships or for the final thesis. These companies interact with the students for almost one year at the end of their studies......, providing a good foundation for the company supervisors to answer questions about the students’ abilities as an engineer. In this paper, we discuss the design and result of the questionnaire, and the obtained results. As mentioned above, the survey will give us and the CDIO community detailed insights...

  8. Repositioning Nigeria University Education for Economic Development through Entrepreneurship Education

    Adamu, L. E.

    2015-01-01

    Nigerians have always realized that education is the singular factor that brings about national development. The central goal of university education is to prepare one for productive employment. Such employment can be a paid one or a self-employed one. This paper examines the problem militating against university education, its implications for…

  9. Development of Key Performance Indicators for the Engineering Technology Education Programs in Taiwan

    Lee, Lung-Sheng; Lai, Chun-Chin

    2004-01-01

    In comparison with engineering, engineering technology is more practical and purposeful. The engineering technology education programs in Taiwan have been mainly offered in 56 universities/colleges of technology (UTs/CTs) and are anticipated to continuously improve their performance to prepare quality engineering technologists. However, it is…

  10. Software Engineering Education: Some Important Dimensions

    Mishra, Alok; Cagiltay, Nergiz Ercil; Kilic, Ozkan

    2007-01-01

    Software engineering education has been emerging as an independent and mature discipline. Accordingly, various studies are being done to provide guidelines for curriculum design. The main focus of these guidelines is around core and foundation courses. This paper summarizes the current problems of software engineering education programs. It also…

  11. Robert Henry Thurston: Professionalism and Engineering Education

    Nienkamp, Paul

    2016-01-01

    Robert Henry Thurston is presented in this article. He provides one the most significant examples of professionalizing engineering through innovative education and promoting scientific education practices in the late nineteenth century. The son of a draftsmen and steam engine mechanic, Thurston spent his early years in Providence, Rhode Island.…

  12. Motivational Factors, Gender and Engineering Education

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Holgaard, Jette Egelund

    2013-01-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students reasons for choosing a career in engineering. We find that women are significantly more influenced by…

  13. Transferring experience labs for production engineering students to universities in newly industrialized countries

    Leiden, A.; Posselt, G.; Bhakar, V.; Singh, R.; Sangwan, K. S.; Herrmann, C.

    2018-01-01

    The Indian economy is one of the fastest growing economies in the world and the demand for the skilled engineers is increasing. Subsequently the Indian education sector is growing to provide the necessary number of skilled engineers. Current Indian engineering graduates have broad theoretical background but lack in methodological, soft and practical skills. To bridge this gap, the experience lab ideas from the engineering education at “Die Lernfabrik” (learning factory) of the Technische Universität Braunschweig (TU Braunschweig) is transferred to the Birla Institute of Technology and Science in Pilani (BITS Pilani), India. This Lernfabrik successfully strengthened the methodological, soft and practical skills of the TU Braunschweig production-engineering graduates. The target group is discrete manufacturing education with focusing on energy and resource efficiency as well as cyber physical production systems. As the requirements of industry and academia in India differs from Germany, the transfer of the experience lab to the Indian education system needs special attention to realize a successful transfer project. This publication provides a unique approach to systematically transfer the educational concept in Learning Factory from a specific university environment to a different environment in a newly industrialized country. The help of a bilateral university driven practice partnership between the two universities creates a lighthouse for the Indian university environment.

  14. Engineering and science education for nuclear power

    1986-01-01

    The Guidebook contains detailed information on curricula which would provide the professional technical education qualifications which have been established for nuclear power programme personnel. The core of the Guidebook consists of model curricula in engineering and science, including relevant practical work. Curricula are provided for specialization, undergraduate, and postgraduate programmes in nuclear-oriented mechanical, chemical, electrical, and electronics engineering, as well as nuclear engineering and radiation health physics. Basic nuclear science and engineering laboratory work is presented together with a list of basic experiments and the nuclear equipment needed to perform them. Useful measures for implementing and improving engineering and science education and training capabilities for nuclear power personnel are presented. Valuable information on the national experiences of IAEA Member States in engineering and science education for nuclear power, as well as examples of such education from various Member States, have been included

  15. Engineering Education in K-12 Schools

    Spence, Anne

    2013-03-01

    Engineers rely on physicists as well as other scientists and mathematicians to explain the world in which we live. Engineers take this knowledge of the world and use it to create the world that never was. The teaching of physics and other sciences as well as mathematics is critical to maintaining our national workforce. Science and mathematics education are inherently different, however, from engineering education. Engineering educators seek to enable students to develop the habits of mind critical for innovation. Through understanding of the engineering design process and how it differs from the scientific method, students can apply problem and project based learning to solve the challenges facing society today. In this talk, I will discuss the elements critical to a solid K-12 engineering education that integrates science and mathematics to solve challenges throughout the world.

  16. Teaching in English at Engineering Education in Denmark

    Gregersen, Anne

    2017-01-01

    is a collaboration between LearningLab DTU, The Technical University of Denmark, CUCE, Copenhagen University College of Engineering, and AAU, Aalborg University. The purpose of the project has been to develop a concept for an English course that combines language development skills with teaching methodology...... of the internationalisation process that higher education is undergoing, and as a means to further transnational student mobility. The current debate at Danish universities centres upon possible implications of teaching in English for the quality of the courses, including the question of whether the teachers are sufficiently...... equipped to meet the challenges of teaching in English. This paper presents and discusses experience gained from a pilot project initiated by LearningLab DTU and funded by a national fund, “Competency Development of Teachers who are Teaching in English at Engineering Education in Denmark”. The project...

  17. teaching and learning methodologies in engineering education in ...

    Global Journal

    ENGINEERING EDUCATION IN NIGERIAN UNIVERSITIES. OGRI J. USHIE AND JULIE C. OGBULEZIE. (Received 20 February 2017; Revision Accepted 17 May 2016). ABSTRACT. The students' outcome in terms of quality of graduates as regard teaching and learning determines whether the existing methods should be ...

  18. Introduction to Problem Based Learning for Engineering Education

    Moesby, Egon; Rosenørn, Torben

    2003-01-01

    Documentation material and working papers for the workshop "Introduction to Problem Based Learning for Engineering Education" held at Chiang Mai University, Chiang Mai, Thailand, 6 - 10 October 2003. The material support the workshop where the participants go through a complete pre-planning cycle...

  19. An Interactive Computer Aided Electrical Engineering Education Package.

    Cavati, Cicero Romao

    This paper describes an educational package to help the learning process. A case study is presented of an energy distribution course in the Electrical Engineering Department at the Federal University of Espirito Santo (UFES). The advantages of the developed package are shown by comparing it with the traditional academic book. This package presents…

  20. Open BIM in courses in engineering education

    Karlshøj, Jan; Vestergaard, Flemming

    2016-01-01

    The Technical University of Denmark has included open BIM in its BIM or BIM-related courses for bachelor, master and PhD students studying civil or architectural engineering. A majority of students are introduced to open BIM during their education, and those who are selecting courses in advanced...... BIM or building design are becoming more familiar with the concept. A number of students are including open BIM in their bachelor projects or master theses. The main reason for including open BIM in teaching is that open BIM has been a mandatory deliverable in Denmark since 2007 in state......-financed construction projects through the IFC format. From 2013 the requirements also included social housing and all public building projects. Students are exploring the capabilities of open BIM, and have been able both to identify satisfactory results as well as propose enhancements in order to compensate...

  1. Education of indoor enviromental engineering technology

    Kic, P.; Zajíček, Milan

    2011-01-01

    Roč. 9, Spec. 1 (2011), s. 83-90 ISSN 1406-894X. [Biosystems Engineering 2011. Tartu, 12.05.2011-13.05.2011] Institutional research plan: CEZ:AV0Z10750506 Keywords : Biosystems engineering * indoor environment * study * programs Subject RIV: AM - Education http://library.utia.cas.cz/separaty/2011/VS/zajicek-education of indoor enviromental engineering technology.pdf

  2. The Romanian educational system in nuclear engineering field - experience and new approaches

    Dragusin, O.; Burghelea, A.

    2001-01-01

    In this paper we would like to present the actual status of the education in the nuclear engineering field at 'Pantholic' University Bucharest, Romania, Power Engineering Faculty, Nuclear Power Plant Department, and also the efforts of integration of the educational system of Romania into the international system and the development of new concepts concerning the education of the new specialists generation. (authors)

  3. A brief history of graduate distance education in nuclear engineering at Penn State Univ

    Hochreiter, L. E.; Zimmerman, D. L.; Brenizer Jr, J. S.; Stark, M. A.

    2006-01-01

    The Pennsylvania State University Nuclear Engineering Distance Education Program has a twenty year history of providing graduate level distance education in Nuclear Engineering. The Distance Education Program was initiated as a specific program which was developed for the Westinghouse Energy Systems Divisions in Pittsburgh. In 1983, Carnegie-Mellon University (CMU) decided to terminate its small Nuclear Engineering Program. Up until that time, Westinghouse employees could enroll at CMU for graduate classes in Nuclear Engineering as well as other engineering disciplines and could obtain a masters degree or if desired, could continue for a Ph.D. degree. (authors)

  4. Sustainable Product Design, Engineering and Management Education for Industrial Design Engineering

    Boks, C.; Diehl, J.C.; Wever, R.

    2006-01-01

    Developments in the field of sustainable product design are manifold, which means that education in this field is rapidly evolving as well. In this paper, the continuously evolving portfolio of courses offered at Delft University of Technology’s Industrial Design Engineering faculty is

  5. 我国大学工程伦理教育内容体系构造%The Content System of Engineering Ethics Education in China′s Universities

    姜卉

    2012-01-01

    本文通过分析工程伦理教育的可行性、明确工程伦理教育的目标来确定工程伦理教育的内容。在对工程伦理教育目标的充分界定与把握的基础上,论证了工程伦理教育是完全可行的。基于Rest的道德行为四组分模型,分析确定了我国工程伦理教育的目标是提升学生的伦理意识以及伦理判断能力,并确定了契合此目标的工程伦理教育内容——工程中的伦理问题、工程中的伦理冲突和伦理决策过程的影响因素。%The development of engineering ethics education is just in time when the " Excellent Engineer Developing Program " has been proposed and the Master of Engineering Management degree has been set up in China recently.In this paper,the contents of engineering ethics education are discussed based on the analysis of the feasibility and the objectives of engineering ethics education.The proposition of engineering ethics education is totally feasible if the objectives of engineering ethics education are definitely determined.The objectives of engineering ethics education are confirmed which are respectively raising ethical awareness and promoting the ability of ethical judgment based on the theory of Four Components Moral Behavioral Model of Rest.The contents of engineering ethics education which correspond to the objectives are determined,including the ethical issues in engineering,the ethical conflicts in engineering and the influencing factors of ethical decision-making process.

  6. Expanding the Universe of Education.

    Parsons, Elizabeth

    1996-01-01

    Definitions of "education" and "rural" are debunked and expanded. The three major tasks of rural education are educating people to understand their own needs, the unavoidable changes that will transform rural Australia within their lifetimes, and the range of technologies that can enhance their well-being. Presents a strategy…

  7. Feminist Teaching in University Physical Education Programs.

    Bain, Linda L.; And Others

    1991-01-01

    Examines feminist teaching in university physical education. Three articles describe the personal experiences of physical educators who try to teach in ways that promote equality. The articles focus on social diversity and justice and feminist pedagogy in the sport sciences and physical education. (SM)

  8. Digital Technologies as Education Innovation at Universities

    Kryukov, Vladimir; Gorin, Alexey

    2017-01-01

    This paper analyses the use of digital technology-based education innovations in higher education. It demonstrated that extensive implementation of digital technologies in universities is the main factor conditioning the acceleration of innovative changes in educational processes, while digital technologies themselves become one of the key…

  9. Unemployment, Entrepreneurial Education and Mega Universities ...

    Individuals acquire education for two broad fundamental reasons, as an investment and as consumption. The investment function of education has continued to create tension for job search leading to cases of unemployment. Entrepreneurship education and establishment of mega universities have being identified as ...

  10. Environmental engineering education: examples of accreditation and quality assurance

    Caporali, E.; Catelani, M.; Manfrida, G.; Valdiserri, J.

    2013-12-01

    Environmental engineers respond to the challenges posed by a growing population, intensifying land-use pressures, natural resources exploitation as well as rapidly evolving technology. The environmental engineer must develop technically sound solutions within the framework of maintaining or improving environmental quality, complying with public policy, and optimizing the utilization of resources. The engineer provides system and component design, serves as a technical advisor in policy making and legal deliberations, develops management schemes for resources, and provides technical evaluations of systems. Through the current work of environmental engineers, individuals and businesses are able to understand how to coordinate society's interaction with the environment. There will always be a need for engineers who are able to integrate the latest technologies into systems to respond to the needs for food and energy while protecting natural resources. In general, the environment-related challenges and problems need to be faced at global level, leading to the globalization of the engineering profession which requires not only the capacity to communicate in a common technical language, but also the assurance of an adequate and common level of technical competences, knowledge and understanding. In this framework, the Europe-based EUR ACE (European Accreditation of Engineering Programmes) system, currently operated by ENAEE - European Network for Accreditation of Engineering Education can represent the proper framework and accreditation system in order to provide a set of measures to assess the quality of engineering degree programmes in Europe and abroad. The application of the accreditation model EUR-ACE, and of the National Italian Degree Courses Accreditation System, promoted by the Italian National Agency for the Evaluation of Universities and Research Institutes (ANVUR), to the Environmental Engineering Degree Courses at the University of Firenze is presented. In

  11. Digital Innovation and Nuclear Engineering Education in UNED: Challenges, Trends and Opportunities

    Alonso-Ramos, M.; Sánchez-Elvira Paniagua, Á.; Martín, S.; Castro Gil, M.; Sanz Gozalo, J.

    2016-01-01

    Full text: Innovation in nuclear engineering education should reflect the current challenges, trends and opportunities that digital technologies are promoting in the whole educational field. The European Commission has recently stressed that technology and open educational resources represent clear opportunities to reshape EU education, contributing to the necessary modernization of higher education in order to give response to XXI century challenges. In this paper, the innovations that the Spanish National Distance Education University (UNED) are making in the digital education domain, including open educational resources (OER) and massive open online courses (MOOCs) developments applied to science, technology, engineering and mathematics (STEM) and the nuclear engineering field, are presented. (author

  12. Technology-Enhanced Mathematics Education for Creative Engineering Studies

    Triantafyllou, Eva; Timcenko, Olga

    2014-01-01

    This project explores the opportunities and challenges of integrating digital technologies in mathematics education in creative engineering studies. Students in such studies lack motivation and do not perceive the mathematics the same way as mathematics students do. Digital technologies offer new...... are conceptualized. Then, we are going to apply this field data in designing learning technologies, which will be introduced in university classrooms. The effect of this introduction will be evaluated through educational design experiments....

  13. Agricultural Engineering Education in Nigeria

    Aboaba, F. O.

    1974-01-01

    Agricultural engineering, an important new branch of engineering in Nigeria, is discussed in relation to available training programs, diploma and certificate courses, and evaluation of training programs. (Author/PG)

  14. Centre for nuclear engineering University of Toronto annual report 1984

    1984-12-01

    The annual report of the Centre for Nuclear Engineering, University of Toronto covers the following subjects: message from the Dean; Chairman's message; origins of the centre; formation of the centre; new nuclear appointments; and activities of the centre, 1984

  15. Motivational factors, gender and engineering education

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne; Egelund Holgaard, Jette

    2013-06-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find that women are significantly more influenced by mentors than men, while men tend to be more motivated by intrinsic and financial factors, and by the social importance of the engineering profession. Parental influence is low across all programmes and by differentiating between specific clusters of engineering programmes, we further show that these overall gender differences are subtle and that motivational factors are unequally important across the different educational programmes. The findings from this study clearly indicate that intrinsic and social motivations are the most important motivational factors; however, gender and programme differentiation needs to be taken into account, and points towards diverse future strategies for attracting students to engineering education.

  16. Engineering education and a lifetime of learning

    Eisley, J. (Editor)

    1974-01-01

    The result of an eleven-week study by the National Aeronautics and Space Administration (NASA) and the American Society of Engineering Education is presented. The study was the ninth of a series of programs. The purposes of the programs were: (1) to introduce engineering school faculty members to system design and to a particular approach to teaching system design, (2) to introduce engineering faculty to NASA and to a specific NASA center, and (3) to produce a study of use to NASA and to the participants. The story was concerned with engineering education in the U.S., and concentrated upon undergraduate education and teaching, although this bias was not meant to imply that research and graduate study are less important to engineering education.

  17. Engineering opportunities in nuclear engineering

    Walton, D.G.

    1980-01-01

    The pattern of education and training of Nuclear Engineers in the UK is outlined under the headings; degree courses for professional engineers, postgraduate courses, education of technician engineers. Universities which offer specific courses are stated and useful addresses listed. (UK)

  18. Problems of engineering education and their decision involving industry

    R. P. Simonyants

    2014-01-01

    Full Text Available In Russia, the problems of engineering education are connected with political and economic upheavals of the late last century. At the same time, some leading engineering universities in Russia, such as the Bauman Moscow State Technical University (BMSTU were resistant to the damaging effects of the crisis. But the methodology and experience of their effective work are insufficiently known.The problems of international engineering school development are also known. The first UNESCO World Report on Engineering (2010 assesses the state of engineering education as follows: worldwide shortage of engineers is a threat to the development of society.Based on the analysis of the current state of engineering education in the world and tendencies of development an urgency of its modernization with the focus on the enhancement of practical component has been shown.Topical problems associated with innovations and modernization in engineering education in the field of aerospace technology were discussed at the first international forum, which was held in Beijing Beyhanskom University (BUAA on 8 - 9 September 2012. The author attended this forum and presented his impressions of its work. It was noted that the role of Russia in the global process to form and develop engineering education is ignored. This opinion sounded, generally, in all speakers' reports, apart from ours.The President BUAA, a Professor Jinpeng Huai, and a Professor Qiushi Li. talked about the problems of building the engineering education system in China. It was emphasized that in China a study of engineering education techniques was motivated by the fact that quality assurance of engineering education at U.S. universities does not meet requirements.Attention is drawn to Dr. David Wisler's report who is a representative of the U.S. aerospace industry (General Electric Aviation corporation, actively promoting networking technology "initiative CDIO».The assessment of the engineering education

  19. Entrepreneurial universities in a world educational system

    Iryna Kalenyuk

    2016-12-01

    Full Text Available This article analyzes modern development tendencies of university activities, it proved establishing of a global educational system, which shows increase of university education role, competition escalating and transformation of modern universities functions. It comprehensively studies the process when universities, both traditional and modern – business ones, are extending their functions. The article studied the development of scientists’ beliefs related to the essence and forms of entrepreneurial universities. On a basis of generalization of existing approaches, the authors give definition of the essence of entrepreneurial university as a subject of educational, scientific and other allied activities, which receives financial resources from diversified sources, extends fields of its activities and services. The foundation of the system of extended and main criteria for definition of entrepreneurial universities was laid. The main ones are the following: considerable financial autonomy and receiving of significant funding from non-governmental and diversified sources. Amounts and financial funding structure of the world leading universities were analyzed. It was proved that income from activities, which are allied with the main one (educational activity, increase. The article provides the amounts and the significance of international grants that ensure financial firmness, financial motivation of personnel, upgrades of facilities and resources, initiation and effectiveness of scientific-research activities of universities. Special attention was paid to research of such financial resources of the world leading universities as endowment funds, their scales, features and importance to boost economic capacities of higher education establishments. It was proved that it is important to consider world experience of entrepreneurial universities’ work within development and improving of competitive performance of Ukrainian higher education

  20. Educating the (microwave) engineer of the future

    Smolders, A.B.; Vleeshouwers, J.M.

    2012-01-01

    The interest of secondary school students in science and engineering was investigated in the Netherlands. The outcome of this study shows that the technical universities are currently not very attractive for a large group of young people. Together with the requirements for the engineer of the

  1. Communication Education at Thai Universities.

    Warren, John; Khotanan, Adchara

    1991-01-01

    Discusses the communication education programs available in Thailand and the recent increase in the interest of this field. Discusses developmental journalism (defined as the development of politics, culture, economy, education, and agriculture) in which communication is seen as a partner with government. (MG)

  2. Distance Education at Conventional Universities in Germany

    Hans-Henning Kappel

    2002-01-01

    Full Text Available Germany’s educational system has undergone a series of transformations during the last 40 years. In recent years, marked increases in enrolment have occurred. In response, admission requirements have been relaxed and new universities have been established.Academic distance education in the former Federal Republic of Germany (West Germany was ushered in by the educational radio broadcasts around the end of the 1960s. Aside from the formation of the FernUniversität (Open University in West Germany in 1975, there were significant developments in distance education occurring at the major universities in the German Democratic Republic (East Germany. After German reunification in 1990, the new unitary state launched programs to advance the development of distance education programs at conventional universities.Germany’s campus-based universities (Präsenzuniversitäten created various entities, including central units and consortia of universities to design and market distance education programs. Hybridisation provides the necessary prerequisites for dual mode delivery, such as basic and continuing education programs, as well as for the combination of distance and campus-based education (Präsenzstudium. Hybridisation also has also opened the door for the creation of new programs.Following an initial phase in which distance education research is expected to centralize a trend towards decentralisation is likely to follow. The German Association for Distance Education (AG-F offers a viable research network in distance education. Two dual mode case studies are also be surveyed: The Master of Arts degree, offered by the University of Koblenz-Landau, with Library Science as the second major, and the University of Kaiserslautern, where basic education will continue to be captured within the domain of the Präsenzstudium or campus-based education.The area in which distance education is flourishing most is within the field of academic continuing

  3. Nuclear engineering education in the United States

    Williamson, T.G.

    1982-01-01

    In discussing nuclear engineering education in the United States it is shown that the most critical issue facing the nuclear engineering education community today is enrolment in a time of increasing demand for graduate engineers. Related to the issue of enrolment is support for graduate students, whether it be fellowships, traineeships, or research assistantships. Other issues are those of maintaining a vital faculty in the face of a competitive job market, of maintaining research facilities and developing new ones, and of determining the directions of educational efforts in the future. (U.K.)

  4. A systematic approach to engineering ethics education.

    Li, Jessica; Fu, Shengli

    2012-06-01

    Engineering ethics education is a complex field characterized by dynamic topics and diverse students, which results in significant challenges for engineering ethics educators. The purpose of this paper is to introduce a systematic approach to determine what to teach and how to teach in an ethics curriculum. This is a topic that has not been adequately addressed in the engineering ethics literature. This systematic approach provides a method to: (1) develop a context-specific engineering ethics curriculum using the Delphi technique, a process-driven research method; and (2) identify appropriate delivery strategies and instructional strategies using an instructional design model. This approach considers the context-specific needs of different engineering disciplines in ethics education and leverages the collaboration of engineering professors, practicing engineers, engineering graduate students, ethics scholars, and instructional design experts. The proposed approach is most suitable for a department, a discipline/field or a professional society. The approach helps to enhance learning outcomes and to facilitate ethics education curriculum development as part of the regular engineering curriculum.

  5. Learning analytics for smart campus: Data on academic performances of engineering undergraduates in Nigerian private university.

    Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; John, Temitope M; Odukoya, Jonathan A; Omole, David O

    2018-04-01

    Empirical measurement, monitoring, analysis, and reporting of learning outcomes in higher institutions of developing countries may lead to sustainable education in the region. In this data article, data about the academic performances of undergraduates that studied engineering programs at Covenant University, Nigeria are presented and analyzed. A total population sample of 1841 undergraduates that studied Chemical Engineering (CHE), Civil Engineering (CVE), Computer Engineering (CEN), Electrical and Electronics Engineering (EEE), Information and Communication Engineering (ICE), Mechanical Engineering (MEE), and Petroleum Engineering (PET) within the year range of 2002-2014 are randomly selected. For the five-year study period of engineering program, Grade Point Average (GPA) and its cumulative value of each of the sample were obtained from the Department of Student Records and Academic Affairs. In order to encourage evidence-based research in learning analytics, detailed datasets are made publicly available in a Microsoft Excel spreadsheet file attached to this article. Descriptive statistics and frequency distributions of the academic performance data are presented in tables and graphs for easy data interpretations. In addition, one-way Analysis of Variance (ANOVA) and multiple comparison post-hoc tests are performed to determine whether the variations in the academic performances are significant across the seven engineering programs. The data provided in this article will assist the global educational research community and regional policy makers to understand and optimize the learning environment towards the realization of smart campuses and sustainable education.

  6. A case for the revision of power engineering syllabi at Kenyan universities

    Abungu, N.; Akumu, A. [Jomo Kenyatta Univ. of Agriculture and Technology, Nairobi (Kenya). Dept. of Electrical and Electronic Engineering; Munda, J. [Tshwane Univ. of Technology, Pretoria (South Africa). Dept. of Power Engineering

    2005-07-01

    A summary of electrical power engineering education in Kenyan universities was presented. Industry expectations for power systems graduates were discussed. Despite rapid changes in electrical power industries around the world, electrical power engineering in Kenya has remained the same for several years. Curriculum changes were last initiated in the 1980s. Universities have not promoted power engineering and its importance to society, and misunderstandings have led to a lack of employment opportunities for graduates and low enrolment levels. Recent advances in artificial neural networks, genetic algorithms, and fuzzy logic within power systems engineering are not currently taught at Kenyan universities. The deregulation of the power industry calls for a re-assessment of how power engineering is taught. Accidents related to poor engineering designs are relatively common in Kenya and have led to the loss of lives. Severe capacity shortfalls experienced in the country have led to a renewed interest in alternative sources of electricity generation. Environmental studies will help students appreciate the importance of using energy sources that do not degrade the environment. It was concluded that the introduction of new approaches to power engineering will result in increased interest from students. The establishment of industry-university collaborations was recommended, as well as active links with international universities. 12 refs.

  7. Holistic Education: The Social Reality of Engineering

    HELENA TRBUŠIĆ

    2013-12-01

    Full Text Available Over the last few decades, scientists exploring the aspects of engineering education and investigating the strong connection between the engineering profession and society have argued for a more rounded, holistic approach to the engineering curriculum. In addition to fundamental technical subjects, they have proposed the inclusion of a broad range of social subjects in order to equip young engineers with social and communication skills relevant for teamwork, and to enhance their awareness about both the way social changes influence the implementation of certain engineering solutions and about the way developments in engineering have a considerable impact on society in general. This paper presents the results of a two-year qualitative study of the importance of social subjects within the engineering academic curriculum at the Faculty of Mechanical Engineering and Naval Architecture in Zagreb, Croatia.

  8. Introducing survival ethics into engineering education and practice.

    Verharen, C; Tharakan, J; Middendorf, G; Castro-Sitiriche, M; Kadoda, G

    2013-06-01

    Given the possibilities of synthetic biology, weapons of mass destruction and global climate change, humans may achieve the capacity globally to alter life. This crisis calls for an ethics that furnishes effective motives to take global action necessary for survival. We propose a research program for understanding why ethical principles change across time and culture. We also propose provisional motives and methods for reaching global consensus on engineering field ethics. Current interdisciplinary research in ethics, psychology, neuroscience and evolutionary theory grounds these proposals. Experimental ethics, the application of scientific principles to ethical studies, provides a model for developing policies to advance solutions. A growing literature proposes evolutionary explanations for moral development. Connecting these approaches necessitates an experimental or scientific ethics that deliberately examines theories of morality for reliability. To illustrate how such an approach works, we cover three areas. The first section analyzes cross-cultural ethical systems in light of evolutionary theory. While such research is in its early stages, its assumptions entail consequences for engineering education. The second section discusses Howard University and University of Puerto Rico/Mayagüez (UPRM) courses that bring ethicists together with scientists and engineers to unite ethical theory and practice. We include a syllabus for engineering and STEM (Science, Technology, Engineering and Mathematics) ethics courses and a checklist model for translating educational theory and practice into community action. The model is based on aviation, medicine and engineering practice. The third and concluding section illustrates Howard University and UPRM efforts to translate engineering educational theory into community action. Multidisciplinary teams of engineering students and instructors take their expertise from the classroom to global communities to examine further the

  9. Cosmic Accelerators: Engines of the Extreme Universe

    Funk, Stefan

    2009-06-23

    The universe is home to numerous exotic and beautiful phenomena, some of which can generate almost inconceivable amounts of energy. While the night sky appears calm, it is populated by colossal explosions, jets from supermassive black holes, rapidly rotating neutron stars, and shock waves of gas moving at supersonic speeds. These accelerators in the sky boost particles to energies far beyond those we can produce on earth. New types of telescopes, including the Fermi Gamma-ray Space Telescope orbiting in space, are now discovering a host of new and more powerful accelerators. Please come and see how these observations are revising our picture of the most energetic phenomena in the universe.

  10. Contributions of university nuclear engineering departments to the national research agenda

    Peddicord, K.L.

    1991-01-01

    The history and character of university nuclear engineering departments have enabled them to play unique roles in higher education and to make valuable contributions in numerous important research fields. Nuclear engineering programs have several distinguishing and noteworthy characteristics. These characteristics include quality, diversity, and effectiveness. However, the continued viability of these programs is in question, and the importance of these programs may only be recognized after the capability has been lost. To recover this capability may well prove to be an impossibility

  11. Motivational factors, gender and engineering education

    Kolmos, Anette; Mejlgaard, Niels; Haase, Sanne Schioldann

    2013-01-01

    Based on survey data covering the full population of students enrolled in Danish engineering education in autumn 2010, we explore the motivational factors behind educational choice, with a particular aim of comparing male and female students1 reasons for choosing a career in engineering. We find...... that women are significantly more influenced by mentors than men, while men tend to be more motivated by intrinsic and financial factors, and by the social importance of the engineering profession. Parental influence is low across all programmes and by differentiating between specific clusters of engineering......; however, gender and programme differentiation needs to be taken into account, and points towards diverse future strategies for attracting students to engineering education....

  12. Collaborative Learning at Engineering Universities: Benefits and Challenges

    Olga V. Sumtsova

    2018-01-01

    Full Text Available This paper concerns the cutting edge educational approaches incorporated into syllabuses of the most progressive Russian higher technical schools. The authors discuss one of the active methods in teaching foreign languages – collaborative learning implemented in e-courses. Theoretical and historical aspects of this approach are addressed, as are its suitability for engineering education and possible ways of introducing collaborative learning into e-courses. Collaborative learning technology offers wide prospects for teachers of foreign languages as it enables the use of various patterns of interaction, promotes discussion, opinion exchange, peer assessment and building an e-learning community, fosters the development of e-culture and netiquette, and prepares future specialists for work in their professional sphere under the new conditions imposed by society’s technological and cultural development. This paper describes real pedagogical experience of teaching English to students using the platform Moodle, focusing on the capacity of different Moodle instruments for designing group work tasks. Recommendations are given for their usage and the results of implementing a collaborative learning approach into certain e-courses offered at Tomsk Polytechnic University (TPU are presented.

  13. To Educate Engineers or to Engineer Educators?: Exploring Access to Engineering Careers

    Eastman, Michael G.; Christman, Jeanne; Zion, George H.; Yerrick, Randy

    2017-01-01

    Although studies claim increases in underrepresented populations choosing STEM majors, barriers to retention, and higher education degree completion in STEM still exist. This study examined efforts of a prominent technical university to attract and retain urban high school graduates through a tuition scholarship program. We sought to determine the…

  14. Rail Engineering and Education Symposium Materials.

    2016-05-26

    The objective of this project is to develop curricular materials for the Rail Engineering and Education : Symposia held in the summers of 2012 and 2014. : Description of Activities : The main approach to accomplish the activity is to develop and deli...

  15. Reorganization and the present situation of the department of nuclear engineering of the national universities in Japan

    Kiyanagi, Yoshiaki; Tanaka, Satoru; Imanishi, Nobutsugu; Takeda, Toshikazu; Kudo, Kazuhiko

    2000-01-01

    On July 1999, the 36th Conference on Isotopes in Physics and Engineering was held, where a panel discussion titled on 'new development on nuclear energy and radiation education at universities' was carried out. In the discussion, reports from every universities were stated and some opinion exchanges were carried out. Every representatives of faculty mentioned not only on how nuclear energy and radiation education became, but also on general problems on recent engineering education (for example, what education is aimed under maintenance of what cooperation with the other faculties and specialties). Here were introduced on five cases of typical universities in Japan (Hokkaido, Tokyo, Kyoto, Osaka, and Kyushu Universities), where present states and future scopes in the Nuclear Engineering Faculty and its graduate school were described at a standpoint of their educational researches on nuclear energy. (G.K.)

  16. Environmental Aspects of the Engineering Training at Technical University

    V. V. Bushueva

    2015-01-01

    Full Text Available Problem relevance. The article gives a justification for a need to train professionally competent, ecologically oriented engineers capable to create new equipment taking into account the ecological characteristics. Such approach expresses a requirement coherence to develop technical systems and technologies taking into account, both technical reliability and human and environmental safety. Today, in conditions of modern industrial production it is an important point in engineer’s activity. So to train future engineers who meet these requirements new forms and methods are to be found.Objectives. To prove that involvement of creative student’s teams in training the future ecologically oriented engineers is of importance. The organisational structure and methods of activities along with the principles of revitalizing search for engineering ideas and solutions to develop environmentally safe technical systems and technologies allow us to solve more complicated problems. This is the important characteristic in activities of creative groups. The article considers a significance of the future engineer’s responsibility in terms of environment safety. It gives "Methodical advices to analyse the operational impacts of technical systems on the human and environment" to show that there is a need in development of reliable and environment-safe technical systems.Novelty of this work is a technique for the organization and forms of student creative team’s activities. It represents a revised and updated option of a technique of the creative teams working at the industrial enterprises in France. The revised technique takes into consideration both the specifics of student's audience at technical university and the environment-oriented tasks to be solved. Efficiency of search and solution of environment-oriented engineering tasks is enhanced owing to use of revitalizing methods for the creative team’s activities, which are widely used today in student

  17. SEI Software Engineering Education Directory.

    1987-02-01

    Planning, and Control, Kotler , P. Marketing Decision Making, Concepts and Strategy, Cravens Managerial Fnance: Essentials, Kroncke, C., Nammers, E., and...Textbooks: Applying Software Engineering Principles , Maria Systems: Cyber Turbo Dos Variety of Micros Courses: Introduction to Software Engineering...Assistant Professor of Computer Systems (513) 255-6913 Courses: Software Engineeing Managemrent EENG543 G N R A Textbooks: Principles of Productive

  18. Academic nuclear engineering education - the Dutch way

    Wallerbos, E.J.M.; Geemert, R. van

    1997-01-01

    The academic nuclear engineering educational program in the Netherlands aims not only to give students a thorough knowledge of reactor physics but also to train them in practical skills and presentation techniques. These three aspects are important to become a successful nuclear engineer. (author)

  19. Obstacles to Gender Parity in Engineering Education

    Rohatynskyj, Marta; Davidson, Valerie; Stiver, Warren; Hayward, Maren

    2008-01-01

    Low rates of women's enrolment in engineering programs has been identified as a global problem within the general concern to enable women to attain parity in education in all areas. A Western women in engineering meta-narrative is identified which contains a complex of obstacles that typify the situation of Western women. The question is asked…

  20. Infusing Real World Experiences into Engineering Education

    National Academies Press, 2012

    2012-01-01

    The aim of this report is to encourage enhanced richness and relevance of the undergraduate engineering education experience, and thus produce better-prepared and more globally competitive graduates, by providing practical guidance for incorporating real world experience in US engineering programs. The report, a collaborative effort of the…

  1. Enterprise 3.0 in Engineering Education

    Ahrens, Andreas; Zascerinska, Jelena

    2011-01-01

    Enterprise 3.0 offers potential solutions for the quality, maintenance and sustainable development of services. The synergy between Enterprise 3.0 and engineering education advances the development of innovative products, processes and services in the European economy. Aim of the research is to analyze student engineers' use of Enterprise 3.0…

  2. Reframing the Universal Right to Education

    McCowan, Tristan

    2010-01-01

    The universal right to education has been enshrined in a range of international rights instruments. Yet despite the considerable secondary literature on the subject, there has been little discussion of the notion of education underpinning the right. This article presents a theoretical exploration of the question, leading to a normative…

  3. Is Education Getting Lost in University Mergers?

    Ursin, Jani; Aittola, Helena; Henderson, Charles; Valimaa, Jussi

    2010-01-01

    Mergers are common phenomena in higher education institutions. Improving educational quality is typically one of the stated goals of university mergers. Yet, little information exists about how merging institutions approach this goal. This paper presents results from a study of planning documents created prior to four mergers in the Finnish higher…

  4. Universal Basic Education and Achievement of Millennium ...

    For this reason, targets have been set, and projects, programmes and schemes instituted to achieve zero level of illiteracy. One of such is maximizing access to quality education in all nooks and crannies of Nigeria. This is where the Universal Basic Education (UBE) and Millennium Development Goals (MDGs) stand out ...

  5. Multicultural University Education and Museum Pedagogy

    Melnikova, G. F.; Gilmanshina, S. I.

    2017-09-01

    The specifics of the educational process in the museum are revealed. The experience of using the multicultural educational space of the museum for developing non-humanitarian directions of the university of general cultural competencies is expounded. The emphasis is on the formation of the ability to tolerate social, ethnic, confessional and cultural differences.

  6. Nuclear Security Education Program at the Pennsylvania State University

    Uenlue, Kenan [The Pennsylvania State University, Radiation Science and Engineering Center, University Park, PA 16802-2304 (United States); The Pennsylvania State University, Department of Mechanical and Nuclear Engineering, University Park, PA 16802-2304 (United States); Jovanovic, Igor [The Pennsylvania State University, Department of Mechanical and Nuclear Engineering, University Park, PA 16802-2304 (United States)

    2015-07-01

    The availability of trained and qualified nuclear and radiation security experts worldwide has decreased as those with hands-on experience have retired while the demand for these experts and skills have increased. The U.S. Department of Energy's National Nuclear Security Administration's (NNSA) Global Threat Reduction Initiative (GTRI) has responded to the continued loss of technical and policy expertise amongst personnel and students in the security field by initiating the establishment of a Nuclear Security Education Initiative, in partnership with Pennsylvania State University (PSU), Texas A and M (TAMU), and Massachusetts Institute of Technology (MIT). This collaborative, multi-year initiative forms the basis of specific education programs designed to educate the next generation of personnel who plan on careers in the nonproliferation and security fields with both domestic and international focus. The three universities worked collaboratively to develop five core courses consistent with the GTRI mission, policies, and practices. These courses are the following: Global Nuclear Security Policies, Detectors and Source Technologies, Applications of Detectors/Sensors/Sources for Radiation Detection and Measurements Nuclear Security Laboratory, Threat Analysis and Assessment, and Design and Analysis of Security Systems for Nuclear and Radiological Facilities. The Pennsylvania State University (PSU) Nuclear Engineering Program is a leader in undergraduate and graduate-level nuclear engineering education in the USA. The PSU offers undergraduate and graduate programs in nuclear engineering. The PSU undergraduate program in nuclear engineering is the largest nuclear engineering programs in the USA. The PSU Radiation Science and Engineering Center (RSEC) facilities are being used for most of the nuclear security education program activities. Laboratory space and equipment was made available for this purpose. The RSEC facilities include the Penn State Breazeale

  7. Nuclear Security Education Program at the Pennsylvania State University

    Uenlue, Kenan; Jovanovic, Igor

    2015-01-01

    The availability of trained and qualified nuclear and radiation security experts worldwide has decreased as those with hands-on experience have retired while the demand for these experts and skills have increased. The U.S. Department of Energy's National Nuclear Security Administration's (NNSA) Global Threat Reduction Initiative (GTRI) has responded to the continued loss of technical and policy expertise amongst personnel and students in the security field by initiating the establishment of a Nuclear Security Education Initiative, in partnership with Pennsylvania State University (PSU), Texas A and M (TAMU), and Massachusetts Institute of Technology (MIT). This collaborative, multi-year initiative forms the basis of specific education programs designed to educate the next generation of personnel who plan on careers in the nonproliferation and security fields with both domestic and international focus. The three universities worked collaboratively to develop five core courses consistent with the GTRI mission, policies, and practices. These courses are the following: Global Nuclear Security Policies, Detectors and Source Technologies, Applications of Detectors/Sensors/Sources for Radiation Detection and Measurements Nuclear Security Laboratory, Threat Analysis and Assessment, and Design and Analysis of Security Systems for Nuclear and Radiological Facilities. The Pennsylvania State University (PSU) Nuclear Engineering Program is a leader in undergraduate and graduate-level nuclear engineering education in the USA. The PSU offers undergraduate and graduate programs in nuclear engineering. The PSU undergraduate program in nuclear engineering is the largest nuclear engineering programs in the USA. The PSU Radiation Science and Engineering Center (RSEC) facilities are being used for most of the nuclear security education program activities. Laboratory space and equipment was made available for this purpose. The RSEC facilities include the Penn State Breazeale

  8. Undergraduate education in nuclear engineering in the USA

    Martin, W.R.

    1993-01-01

    The discipline of nuclear engineering is described, giving some historical background to explain the structure of the curricula commonly found in nuclear engineering programs in the U.S. Typical curricula are described, along with a specific example given by the University of Michigan undergraduate program in nuclear engineering. The National Academy of Sciences report on U.S. nuclear engineering education is summarized, and the major findings are presented, including data on the number of programs, number of degrees, and enrollment trends. Some discussion is made of manpower trends and the degree to which nuclear programs can supply nuclear engineers to meet the anticipated demands of the current decade and into the next century. (author) 12 refs.; 2 figs.; 4 tabs

  9. Introductory Education for Mechanical Engineering by Exercise in Mechanical Disassembly

    Matsui, Yoshio; Asakawa, Naoki; Iwamori, Satoru

    An introductory program “Exercise for engineers in mechanical disassembly” is an exercise that ten students of every team disassemble a motor scooter to the components and then assemble again to the initial form in 15 weeks. The purpose of this program is to introduce mechanical engineering by touching the real machine and learning how it is composed from various mechanical parts to the students at the early period after the entrance into the university. Additional short lectures by young teachers and a special lecture by a top engineer in the industry encourage the students to combine the actual machine and the mechanical engineering subjects. Furthermore, various educations such as group leader system, hazard prediction training, parts filing are included in this program. As a result, students recognize the importance of the mechanical engineering study and the way of group working.

  10. THE MODEL OF LIFELONG EDUCATION IN A TECHNICAL UNIVERSITY AS A MULTILEVEL EDUCATIONAL COMPLEX

    Svetlana V. Sergeyeva

    2016-06-01

    Full Text Available Introduction: the current leading trend of the educational development is characterised by its continuity. Institutions of higher education as multi-level educational complexes nurture favourable conditions for realisation of the strategy of lifelong education. Today a technical university offering training of future engineers is facing a topic issue of creating a multilevel educational complex. Materials and Methods: this paper is put together on the basis of modern Russian and foreign scientific literature about lifelong education. The authors used theoretical methods of scientific research: systemstructural analysis, synthesis, modeling, analysis and generalisations of concepts. Results: the paper presents a model of lifelong education developed by authors for a technical university as a multilevel educational complex. It is realised through a set of principles: multi-level and continuity, integration, conformity and quality, mobility, anticipation, openness, social partnership and feedback. In accordance with the purpose, objectives and principles, the content part of the model is formed. The syllabi following the described model are run in accordance with the training levels undertaken by a technical university as a multilevel educational complex. All syllabi are based on the gradual nature of their implementation. In this regard, the authors highlight three phases: diagnostic, constructive and transformative, assessing. Discussion and Conclusions: the expected result of the created model of lifelong education development in a technical university as a multilevel educational complex is presented by a graduate trained for effective professional activity, competitive, prepared and sought-after at the regional labour market.

  11. Situation of the education in the nuclear field: networks of training and paper of the universities

    Minguez, E.

    2008-01-01

    In this work the education networks in nuclear engineering around Europe American and Asia are presented, focusing in the main role of universities in collaboration with the nuclear industry. (Author) 5 refs

  12. Tensions between entrepreneurship and a university education

    Robinson, Sarah

    beyond narrow definitions of entrepreneurship. The findings suggest that students appear to achieve a transformation of self that touches on previous (forgotten) goals of education and learning that are linked to ‘bildung.’ The transmission of knowledge is acknowledged in university settings as being......The notion that a university education is a public good and the key to national economic growth is widely accepted. Universities have two core activities, one to research and the other to teach. Balancing these core activities is articulated and legitimised through discourses that seek to establish...... the value and goals of university education. As academics the combination of these activities leads us to pose questions about the goals of our teaching and whether what we teach is of value to our students. Whose values are legitimised through our teaching? On the other hand discourses about encouraging...

  13. Ethics Education In The University

    Nguyen K. Q. Trung

    2015-01-01

    Accounting faculty of universities in Vietnam takes an important role in the training of human resources for the society in the field of accounting auditing and taxation. All professors and lecturers who teaching in those faculties have participated in editing and changing the accounting curricular in order to meet the needs of the market labor and requirements of new internationally professional standards. The integration of professional ethics into the curriculum has raised the concern of m...

  14. Renewable energy education at the University level

    Bhattacharya, S.C. [Asian Institute of Technology, Pathumthani (Thailand). Energy Program

    2001-03-01

    The rapid growth in global enrolment of students for higher education observed in recent decades is expected to continue in the early next century. However, the role of the universities and their approach to education may undergo substantial transformation in the future. The Internet is expected to play a significant role in university-level education in general and renewable energy education (REE) in particular. Currently, REE at different universities is characterized by a lack of uniformity in terms of duration, coursework, emphasis on research, etc. There is a need to establish guidelines and standards regarding academic programs and to establish a system of accreditation, preferably global, of REE in different academic disciplines and departments. (author)

  15. Report on survey in fiscal 2000. Survey on introduction of external accreditation system in engineer education (civil engineering); 2000 nendo chosa hokokusho. Gijutsusha kyoiku no gaibu ninteiseido donyu ni kansuru chosa (Doboku)

    NONE

    2001-03-01

    In order to ensure international applicability of engineer education such as in universities and other organizations, and to improve the environment to supply human resources demanded by economic societies, surveys and discussions were given on the external accreditation system for engineer education such as in universities and other organizations. In the field of civil engineering, a special sub-committee was organized, and in advance to a trial examination, surveys and discussions were executed by participating in the actual examination of the engineer educational program at the engineering department of Auckland University, and by participating in the ABET trial examination by the civil engineering department of Kansas State University and the engineering department of Stanford University in the U.S.A. The trial examination was performed upon selecting the engineer educational programs of the civil engineering department of Kinki University and Tottori University. This paper describes the fundamental policies on the educational program examination work for the field of civil engineering, the self-assessment under the educational program, the direction of engineering qualification and educational accreditation, the fundamental concept of examination and accreditation and evaluation process, the works done by the civil engineering section of the science and engineering department of Kinki University, and the works done by the civil engineering section of the engineering department of Tottori University. (NEDO)

  16. Push or Pull Students into Blended Education A Case Study at Delft University of Technology

    Cervone, A.; Melkert, J.A.; Mebus, L.F.M.; Saunders, G.N.

    2016-01-01

    Blended education, or “flipping the classroom” is rapidly becoming a mainstream form of teaching within universities. Within Engineering Education, it is popular as it allows more time in-class to focus on hands on activities such as demonstrations and solving complex problems. This paper discusses the effort conducted to restructure, according to the blended learning principles, the “Propulsion and Power” course of the Aerospace Engineering Bachelor degree programme at Delft University of Te...

  17. Nuclear Safeguards and Security Education at Russian Universities

    Killinger, Mark H.; Goodey, Kent O.; Butler, Gilbert W.; Duncan, Cristen L.

    2008-01-01

    The U.S. Department of Energy is assisting key Russian universities in developing safeguards and security degree programs to prepare the next generation of specialists who will be responsible for protecting nuclear material from illicit use. These programs include course and laboratory work in nuclear material measurements, vulnerability analysis, exterior and interior sensors, and legal aspects of nuclear nonproliferation. Moscow Engineering Physics Institute (MEPhI) has graduated nine classes of masters students, most of who are working in government agencies, research organizations, or pursuing their PhD. With DOE support, MEPhI has also established a 5 1/2-year engineering degree program in safeguards and security. This is a hands-on degree that more closely meets the needs of nuclear facilities. The first class graduated in February 2007, marking a major milestone in Russian nonproliferation education. A second engineering degree program has been established at Tomsk Polytechnic University and is designed to reach those students east of the Ural Mountains, where many nuclear facilities are located. The first class will graduate in February 2009. This paper describes current development of these education programs, new initiatives, and sustainability efforts to ensure their continued viability after DOE support ends. The paper also describes general nonproliferation education activities supported by DOE that complement the more technical safeguards and security education programs.

  18. University education: Demands and challenges

    Eduardo Pinos Vélez

    2013-06-01

    Full Text Available This paper presents a study on the current situation prevailing in the Universities from the point of view of a teacher whose academic since its inception has been Salesian, which allows for a “best approach” to young students and where the passion for teaching is clearly influenced by the teachings of one of the greatest teachers, Don Bosco. Also, these teachings are still of great relevance in our time, seek to adopt these methodologies in our workspaces teaching is challenging, where you can suggest new strategies for communication and integration with students and in this way to service the needy, such as programs aid Persons with Disabilities.

  19. Remote Experiments in Control Engineering Education Laboratory

    Milica B Naumović

    2008-05-01

    Full Text Available This paper presents Automatic Control Engineering Laboratory (ACEL - WebLab, an under-developed, internet-based remote laboratory for control engineering education at the Faculty of Electronic Engineering in Niš. Up to now, the remote laboratory integrates two physical systems (velocity servo system and magnetic levitation system and enables some levels of measurement and control. To perform experiments in ACEL-WebLab, the "LabVIEW Run Time Engine"and a standard web browser are needed.

  20. Engineering education as a complex system

    Gattie, David K.; Kellam, Nadia N.; Schramski, John R.; Walther, Joachim

    2011-12-01

    This paper presents a theoretical basis for cultivating engineering education as a complex system that will prepare students to think critically and make decisions with regard to poorly understood, ill-structured issues. Integral to this theoretical basis is a solution space construct developed and presented as a benchmark for evaluating problem-solving orientations that emerge within students' thinking as they progress through an engineering curriculum. It is proposed that the traditional engineering education model, while analytically rigorous, is characterised by properties that, although necessary, are insufficient for preparing students to address complex issues of the twenty-first century. A Synthesis and Design Studio model for engineering education is proposed, which maintains the necessary rigor of analysis within a uniquely complex yet sufficiently structured learning environment.

  1. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1989

    1990-01-01

    This report summerizes the research and educational activities at the Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo. The Laboratory holds four main facilities, which are Yayoi reactor, an electron accelerator, fusion blanket research facility, and heavy ion irradiation research facility. And they are open to the researchers both inside and outside the University. The application of the facilities are described. The activities and achievements of the Laboratory staffs, and theses for graduate, master, and doctor degrees are also summerized. (J.P.N.)

  2. Engineering education in 21st century

    Alam, Firoz; Sarkar, Rashid; La Brooy, Roger; Chowdhury, Harun

    2016-07-01

    The internationalization of engineering curricula and engineering practices has begun in Europe, Anglosphere (English speaking) nations and Asian emerging economies through the Bologna Process and International Engineering Alliance (Washington Accord). Both the Bologna Process and the Washington Accord have introduced standardized outcome based engineering competencies and frameworks for the attainment of these competencies by restructuring existing and undertaking some new measures for an intelligent adaptation of the engineering curriculum and pedagogy. Thus graduates with such standardized outcome based curriculum can move freely as professional engineers with mutual recognition within member nations. Despite having similar or near similar curriculum, Bangladeshi engineering graduates currently cannot get mutual recognition in nations of Washington Accord and the Bologna Process due to the non-compliance of outcome based curriculum and pedagogy. This paper emphasizes the steps that are required to undertake by the engineering educational institutions and the professional body in Bangladesh to make the engineering competencies, curriculum and pedagogy compliant to the global engineering alliance. Achieving such compliance will usher in a new era for the global mobility and global engagement by Bangladesh trained engineering graduates.

  3. embracing the future of engineering education in nigeria

    HOD

    Nigerian engineering teaching style and outputs, some of the challenges being faced by engineering education in. Nigeria .... feelings and reactions of the students in this situation ...... new century," Chemical Engineering Education, vol. 34, pp ...

  4. Comparing Two Approaches for Engineering Education Development

    Edström, Kristina; Kolmos, Anette

    2012-01-01

    During the last decade there have been two dominating models for reforming engineering education: Problem/Project Based Learning (PBL) and the CDIO Initiative. The aim of this paper is to compare the PBL and CDIO approaches to engineering education reform, to identify and explain similarities...... and differences. CDIO and PBL will each be defined and compared in terms of the original need analysis, underlying educational philosophy and the essentials of the respective approaches to engineering education. In these respects we see many similarities. Circumstances that explain differences in history...... approaches have much in common and can be combined, and especially that the practitioners have much to learn from each other’s experiences through a dialogue between the communities. This structured comparison will potentially indicate specifically what an institution experienced in one of the communities...

  5. Barriers to student success in engineering education

    Boles, Wageeh; Whelan, Karen

    2017-07-01

    In the UK, the USA and Australia, there have been calls for an increase in the number of engineering graduates to meet the needs of current global challenges. Universities around the world have been grappling with how to both attract more engineering students and to then retain them. Attrition from engineering programmes is disturbingly high. This paper reports on an element of research undertaken through an Australian Learning and Teaching Council-funded Fellowship that investigated the factors leading to student attrition in engineering programmes, by identifying barriers to student success. Here, we contrast a review of the literature related to student barriers and success with student perceptions, gathered through a series of focus groups and interviews at three Australian universities. We also present recommendations for action to try to remove barriers to student success.

  6. Globalization and Organizational Change: Engineers' Experiences and Their Implications for Engineering Education

    Lucena, Juan C.

    2006-01-01

    The demand for flexible engineers presents significant challenges to engineering education. Among these is the need for engineers to be prepared to understand and deal with organizational change. Yet engineering education and research on engineers have overlooked the impact of organizational change on engineering work. After outlining the impact…

  7. Teaching Interdisciplinary Engineering and Science Educations

    Kofoed, Lise B.; S. Stachowicz, Marian

    2014-01-01

    In this paper we study the challenges for the involved teachers who plan and implement interdisciplinary educations. They are confronted with challenges regarding their understanding of using known disciplines in a new interdisciplinary way and see the possibilities of integrating disciplines when...... creating new knowledge. We will address the challenges by defining the term interdisciplinary in connection with education, and using the Problem Based Learning educational approach and experience from the engineering and science educational areas to find the obstacles. Two cases based on interdisciplinary...... and understand how different expertise can contribute to an interdisciplinary education....

  8. Chemical Engineering Education - Current and Future Trends

    Gani, Rafiqul

    topics (transport phenomena, separations, reaction engineering, etc.) must remain strong, should the applications that currently emphasize commodity chemicals also include new topics such as sustainability, and product design? In Europe, the European Federation of Chemical Engineering (EFCE) has taken...... has a product focus. With this shift of the chemical industry, what should be the curriculum of the chemical engineering degrees at the BSc- and MSc-levels, and, are the skill set of chemical engineers appropriate for this altered chemical industry? While the basic skill set, defined by the core...... a leading role to define the chemical engineering curriculum. The result has been a set of recommendations for the first (BSc), second (MSc) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

  9. Personalized Education Approaches for Chemical Engineering and Relevant Majors

    Zhao Feng-qing

    2016-01-01

    Full Text Available Personalized education has drawn increasing attention in universities these years. With the purpose of improving the studentss’ comprehensive ability and developing teaching strategies to ensure students’ education is tailored to their needs, we proposed Three-Stage Approach (TSA to enhance personalized education for chemical engineering and relevant majors: professional tutorial system--equipping with professional guidance teachers for freshman students to guide their learning activities and provide professional guidance; open experimental project--setting up open experimental projects for sophomore and junior students to choose freely; individualized education module--setting up 10 different individualized education modules for senior students to select. After years of practice, the personalized education model is improved day by day and proved effective and fruitful.

  10. Virtual Reality in Engineering Education: The Future of Creative Learning

    Abdul-Hadi Ghazi Abulrub

    2011-12-01

    Full Text Available Virtual reality has achieved an adequate level of development for it to be considered in innovative applications such as education, training, and research in higher education. Virtual reality offers both opportunities and challenges for the educational sector. One of the challenges of virtual reality technology is the costs associated which have been unaffordable for educational institutes. However, in recent years, computer hardware and software development has made it more feasible to incorporate virtual reality technology into future teaching strategies. Despite the cost challenges, educational benefits of implementing virtual reality remain compelling. This paper explains virtual reality principle and describes the interactive educational environment developed at WMG, the University of Warwick. It also discusses the benefits of using state-of-the-art 3D photorealistic interactive and immersive virtual environment for engineering undergraduates and postgraduate teaching, learning and training.

  11. Education and training in nuclear science/engineering in Taiwan

    Chung, C.

    1994-01-01

    The present status of nuclear education and training in Taiwan is reviewed. The nuclear science/engineering program has been established in Taiwan under the College of Nuclear Science at the National Tsing Hua University since 1956; it remains the only program among 123 universities and colleges in Taiwan where education and training in nuclear fields are offered. The program, with 52 faculty members, offers advanced studies leading to BSc, MSc, and PhD degrees. Lectures and lab classes are given to 600 students currently registered in the program. Career placement program geared for the 200 graduate and 400 undergraduate students is to orientate them into the local nuclear power utilities as well as agricultural, medical, industrial, academic and governmental sectors where nuclear scientists and engineers at all levels are needed. 8 refs., 1 fig

  12. Quality Management of Engineering Education

    Bentz, Sigurd

    1997-01-01

    Quality management has made a major impact on many commercial and manufacturing companies. Although higher education are similar to companies in some respects, they are different in others. So a well established commercial quality management system can't simply be transferred to higher education...

  13. Engineering a General Education Program: Designing Mechanical Engineering General Education Courses

    Fagette, Paul; Chen, Shih-Jiun; Baran, George R.; Samuel, Solomon P.; Kiani, Mohammad F.

    2013-01-01

    The Department of Mechanical Engineering at our institution created two engineering courses for the General Education Program that count towards second level general science credit (traditional science courses are first level). The courses were designed for the general student population based upon the requirements of our General Education Program…

  14. Oral Assessment in Engineering Education

    Jensen, Bogi Bech

    2010-01-01

    This paper describes an oral assessment technique that has been used for over 20 years at the Centre of Maritime Studies and Engineering in the Faroe Islands. The technique has proven less laborious for the examiners and the students agree that this technique not only assesses their surface...

  15. Social capital in engineering education

    Brown, Shane

    A theoretical argument is presented to suggest that engineering curriculum be designed to develop social capital. Additionally, the value of social capital in the retention of students in the College of Engineering, and the development, role, and value of social capital in an electrical engineering laboratory is evaluated. Data collected includes participant observations, informal and formal student interviews, and a researcher-designed survey. Social capital consists of interaction among individuals (networks), social rules that encourage interactions such as trust and reciprocity (norms), and the value of these networks and norms to the individual and the group. A large body of evidence suggests that social capital is valuable in terms of retention and multiple measures of academic achievement. The importance of social capital in retention was verified by students that have left engineering and those that remain, in terms of interactions with peers, teaching assistants, and engineering faculty; and a lack of sense of community in freshman engineering courses. Students that have left engineering differed in their perceptions of social capital from those that remain in their frustrations with teaching methods that encourage little discussion or opportunities to ask questions about assumptions or approaches. The open-ended nature of laboratory assignments, extensive required troubleshooting, and lack of specific directions from the teaching assistants were found to encourage the development of social capital in the laboratory setting. Degree centrality, a network measure of social capital as the number of ties an individual has within a social network, was found to be positively correlated with laboratory grade. Student perceptions of the importance of interactions with other students on success in the laboratory setting has a negative model effect on academic achievement in the laboratory. In contrast, student perceptions of the quality of interactions with

  16. About, for, in or through entrepreneurship in engineering education

    Mäkimurto-Koivumaa, Soili; Belt, Pekka

    2016-09-01

    Engineering competences form a potential basis for entrepreneurship. There are pressures to find new approaches to entrepreneurship education (EE) in engineering education, as the traditional analytical logic of engineering does not match the modern view of entrepreneurship. Since the previous models do not give tangible enough tools on how to organise EE in practice, this article aims to develop a new framework for EE at the university level. We approach this aim by analysing existing scientific literature complemented by long-term practical observations, enabling a fruitful interplay between theory and practice. The developed framework recommends aspects in EE to be emphasised during each year of the study process. Action-based learning methods are highlighted in the beginning of studies to support students' personal growth. Explicit business knowledge is to be gradually increased only when professional, field-specific knowledge has been adequately accumulated.

  17. Closed and Open Design Projects in the Education of Engineers

    Franksen, Ole Immanuel

    1965-01-01

    The two aspects of engineering education are the teaching of science and the teaching of design. By ``design'' is meant the procedure of selecting and combining distinct elements to create complete systems which will perform useful functions. In this paper, the author describes the application of...... of this concept of design teaching at The Technical University of Denmark, after a procedure which includes a sequence of closed and open design projects in both computational and experimental laboratories...

  18. Datasets on demographic trends in enrollment into undergraduate engineering programs at Covenant University, Nigeria.

    Popoola, Segun I; Atayero, Aderemi A; Badejo, Joke A; Odukoya, Jonathan A; Omole, David O; Ajayi, Priscilla

    2018-06-01

    In this data article, we present and analyze the demographic data of undergraduates admitted into engineering programs at Covenant University, Nigeria. The population distribution of 2649 candidates admitted into Chemical Engineering, Civil Engineering, Computer Engineering, Electrical and Electronics Engineering, Information and Communication Engineering, Mechanical Engineering, and Petroleum Engineering programs between 2002 and 2009 are analyzed by gender, age, and state of origin. The data provided in this data article were retrieved from the student bio-data submitted to the Department of Admissions and Student Records (DASR) and Center for Systems and Information Services (CSIS) by the candidates during the application process into the various engineering undergraduate programs. These vital information is made publicly available, after proper data anonymization, to facilitate empirical research in the emerging field of demographics analytics in higher education. A Microsoft Excel spreadsheet file is attached to this data article and the data is thoroughly described for easy reuse. Descriptive statistics and frequency distributions of the demographic data are presented in tables, plots, graphs, and charts. Unrestricted access to these demographic data will facilitate reliable and evidence-based research findings for sustainable education in developing countries.

  19. Building Management and ICT Learning in Civil Engineering Education

    Christiansson, Per Lennart

    2005-01-01

    The paper presents structures of the learning domains of building informatics exemplified with experiences from building management civil engineering and open education in Industrial IT at Aalborg University. The courses cover areas such as; object oriented programming and relational database...... design, human computer interface, user environment design and usability engineering, computer supported collaborative working, knowledge management, virtual buildings, intelligent buildings, and building systems simulation. Experiences from many years involvement in ICT supported learning and development...... taking into account improvement of learning styles, course content and learning material is also reported....

  20. Development of undergraduate nuclear security curriculum at College of Engineering, Universiti Tenaga Nasional

    Hamid, Nasri A.; Mujaini, Madihah; Mohamed, Abdul Aziz

    2017-01-01

    The Center for Nuclear Energy (CNE), College of Engineering, Universiti Tenaga Nasional (UNITEN) has a great responsibility to undertake educational activities that promote developing human capital in the area of nuclear engineering and technology. Developing human capital in nuclear through education programs is necessary to support the implementation of nuclear power projects in Malaysia in the near future. In addition, the educational program must also meet the nuclear power industry needs and requirements. In developing a certain curriculum, the contents must comply with the university's Outcomes Based Education (OBE) philosophy. One of the important courses in the nuclear curriculum is in the area of nuclear security. Basically the nuclear security course covers the current issues of law, politics, military strategy, and technology with regard to weapons of mass destruction and related topics in international security, and review legal regulations and political relationship that determine the state of nuclear security at the moment. In addition, the course looks into all aspects of the nuclear safeguards, builds basic knowledge and understanding of nuclear non-proliferation, nuclear forensics and nuclear safeguards in general. The course also discusses tools used to combat nuclear proliferation such as treaties, institutions, multilateral arrangements and technology controls. In this paper, we elaborate the development of undergraduate nuclear security course at the College of Engineering, Universiti Tenaga Nasional. Since the course is categorized as mechanical engineering subject, it must be developed in tandem with the program educational objectives (PEO) of the Bachelor of Mechanical Engineering program. The course outcomes (CO) and transferrable skills are also identified. Furthermore, in aligning the CO with program outcomes (PO), the PO elements need to be emphasized through the CO-PO mapping. As such, all assessments and distribution of Bloom Taxonomy

  1. Current status of nuclear engineering education

    Palladino, N.J.

    1975-01-01

    The 65 colleges and universities offering undergraduate degrees in nuclear engineering and the 15 schools offering strong nuclear engineering options are, in general, doing a good job to meet the current spectrum of job opportunities. But, nuclear engineering programs are not producing enough graduates to meet growing demands. They currently receive little aid and support from their customers --industry and government--in the form of scholarships, grants, faculty research support, student thesis and project support, or student summer jobs. There is not enough interaction between industry and universities. Most nuclear engineering programs are geared too closely to the technology of the present family of reactors and too little to the future breeder reactors and controlled thermonuclear reactors. In addition, nuclear engineering programs attract too few women and members of minority ethnic groups. Further study of the reasons for this fact is needed so that effective corrective action can be taken. Faculty in nuclear engineering programs should assume greater initiative to provide attractive and objective nuclear energy electives for technical and nontechnical students in other disciplines to improve their technical understanding of the safety and environmental issues involved. More aggressive and persistent efforts must be made by nuclear engineering schools to obtain industry support and involvement in their programs

  2. Sustainable Product Design, Engineering and Management Education for Industrial Design Engineering

    Boks, C.; Diehl, J.C.; Wever, R.

    2006-01-01

    Developments in the field of sustainable product design are manifold, which means that education in this field is rapidly evolving as well. In this paper, the continuously evolving portfolio of courses offered at Delft University of Technology’s Industrial Design Engineering faculty is systematically discussed, with a focus on content, course formats, assignments and lessons learned from course evaluations in recent years. It is concluded that in particular integration in existing contexts (a...

  3. Engineering education 4.0 excellent teaching and learning in engineering sciences

    Meisen, Tobias; Richert, Anja; Petermann, Marcus; Jeschke, Sabina; Wilkesmann, Uwe; Tekkaya, A

    2016-01-01

    This book presents a collection of results from the interdisciplinary research project “ELLI” published by researchers at RWTH Aachen University, the TU Dortmund and Ruhr-Universität Bochum between 2011 and 2016. All contributions showcase essential research results, concepts and innovative teaching methods to improve engineering education. Further, they focus on a variety of areas, including virtual and remote teaching and learning environments, student mobility, support throughout the student lifecycle, and the cultivation of interdisciplinary skills. .

  4. Scientists Interacting With University Science Educators

    Spector, B. S.

    2004-12-01

    Scientists with limited time to devote to educating the public about their work will get the greatest multiplier effect for their investment of time by successfully interacting with university science educators. These university professors are the smallest and least publicized group of professionals in the chain of people working to create science literate citizens. They connect to all aspects of formal and informal education, influencing everything from what and how youngsters and adults learn science to legislative rulings. They commonly teach methods of teaching science to undergraduates aspiring to teach in K-12 settings and experienced teachers. They serve as agents for change to improve science education inside schools and at the state level K-16, including what science content courses are acceptable for teacher licensure. University science educators are most often housed in a College of Education or Department of Education. Significant differences in culture exist in the world in which marine scientists function and that in which university science educators function, even when they are in the same university. Subsequently, communication and building relationships between the groups is often difficult. Barriers stem from not understanding each other's roles and responsibilities; and different reward systems, assumptions about teaching and learning, use of language, approaches to research, etc. This presentation will provide suggestions to mitigate the barriers and enable scientists to leverage the multiplier effect saving much time and energy while ensuring the authenticity of their message is maintained. Likelihood that a scientist's message will retain its authenticity stems from criteria for a university science education position. These professors have undergraduate degrees in a natural science (e.g., biology, chemistry, physics, geology), and usually a master's degree in one of the sciences, a combination of natural sciences, or a master's including

  5. Engineering and science education for nuclear power

    Mautner-Markhof, F.

    1988-01-01

    Experience has shown that one of the critical conditions for the successful introduction of a nuclear power programme is the availability of sufficient numbers of personnel having the required education and experience qualifications. For this reason, the introduction of nuclear power should be preceded by a thorough assessment of the relevant capabilities of the industrial and education/training infrastructures of the country involved. The IAEA assists its Member States in a variety of ways in the development of infrastructures and capabilities for engineering and science education for nuclear power. Types of assistance provided by the IAEA to Member States include: Providing information in connection with the establishment or upgrading of academic and non-academic engineering and science education programmes for nuclear power (on the basis of curricula recommended in the Agency's Guidebook on engineering and science education for nuclear power); Expert assistance in setting up or upgrading laboratories and other teaching facilities; Assessing the capabilities and interest of Member States and their institutions/organizations for technical co-operation among countries, especially developing ones, in engineering and science education, as well as its feasibility and usefulness; Preparing and conducting nuclear specialization courses (e.g. on radiation protection) in various Member States

  6. B-Learning Tools in Engineering Education

    Angeles Cancela

    2013-04-01

    Full Text Available 0 false 21 18 pt 18 pt 0 0 false false false /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:"Times New Roman"; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The New Higher Education System implies the adoption of different education systems than the traditional ones. Therefore, many college teachers today want to use some new mechanisms to teach the matter and to find better ways of engaging students in the learning process. The objective of this work is to evaluate different learning methods from the student’s point of view and share the authors’ experience towards a different mode of teaching. Three different learning techniques have been used on University of Vigo’s fifth-year engineering students and the students have answered a questionnaire in order to check the effectiveness of the different methods from the students’ point of view. The results of the experience show that the use of learning methods (cooperative learning and multimedia resources fosters student motivation and improves their retention, assimilation, understanding, and proper application of course content.

  7. Changing need for Education of Industrial Engineers

    Thorsteinsson, Uffe

    1997-01-01

    Many changes have taken place in societies and enterprises during the last decades, but have we changed our university structure according to this? Have changes in educational structure only been made according to technologies? The paper propose a change to work flow education....

  8. Annual report of Nuclear Engineering Research Laboratory, Faculty of Engineering, University of Tokyo, fiscal year 1994

    1995-08-01

    This annual report is the summary of the research and education activities, the state of operating research facilities and others in fiscal year 1994 in this Research Laboratory. In this Research Laboratory, there are four main installations, namely the fast neutron source reactor 'Yayoi', the electron linear accelerator, the basic experiment facility for the design of nuclear fusion reactor blanket and the heavy irradiation research facility. The former two are put to the joint utilization by all Japanese universities, the blanket is to that within Faculty of Engineering, and the HIT is to that within this university. The fast neutron science research facility, the installation of which was approved in 1993 as the ancillary equipment of the Yayoi, has been put to the joint utilization for all Japan, and achieved good results. In this report, the management and operation of these main installations, research activities, the publication of research papers,graduation and degree theses, the publication of research papers, graduation and degree theses, the events in the Laboratory for one year, the list of the visitors to the Laboratory, the list of the records of official trips to foreign countries and others, and the list of UTNL reports are described. (K.I.)

  9. CONSTRUCTIVE EDUCATIONAL ENVIRONMENT SCHOOL-UNIVERSITY

    Natalya Petrovna Shatalova

    2016-02-01

    Full Text Available The article presents the results of the study the key components of the development of constructive thinking of students on the basis of model building constructive educational environment school-University. It was conducted from a position of constructive approach in education, as a process of systemic-structural methodology of cognitive and creative activity of the student, promotes development and formation of various constructive qualities of the individual. The functions of constructive educational environment school-University aimed at developing constructive thinking of students, defined by its structural components and connections, shows the consistency of self-development of constructive thinking and job satisfaction the development of constructive skills. The findings reveal innovative possibilities of cooperation of schools and universities in the design and functioning model of constructive educatio-nal space that contributes to the development of constructive thinking of all its stakeholders.Purpose: measuring the effectiveness of the model constructive educational environment school-University aimed at the development of students.Methodology: the Programme of research included: (1 diagnosis of the development level of constructive thinking on the questionnaire developed in the context of the constructive theory of education, (2 augmented and revised by the author the diagnosis of satisfaction and importance model of constructive educational environment school-University by the method of G.A. Gagarin, as well as theoretical modeling, method of involved observation, formal teaching method.Results. The article introduces the concept of «constructive learning environments», which are considered in relation to the organization and conduct of joint activities of teachers, teachers and students. The authors give a theoretical comparative analysis of scientific works of colleagues in the context of the problem. Offer a brief

  10. Unemployment, Entrepreneurial Education and Mega Universities: Challenges to Expanding Access in Education in Nigeria University

    Undie, John Atewhoble; Okafor, Victor

    2014-01-01

    In fundamental economics, individuals acquired education for two broad reasons, as an investment and as consumption. The investment function of education has continued to create tension for job search leading to cases of unemployment. Entrepreneurship education and establishment of mega universities have been identified as panaceas. This paper…

  11. Environmental engineering at the University of Strathclyde in Glasgow

    Clarke, J.A.; Hensen, J.L.M.; Johnstone, C.M.; McLean, R.C.

    1994-01-01

    This paper describes the recently revised curriculum for the Environmental Engineering course at the University of Strathclyde in Glasgow. This is done in relation to course content and scope, design and research projects, the role of experimentation and the deployment of advanced computing in terms

  12. The University of Michigan's Computer-Aided Engineering Network.

    Atkins, D. E.; Olsen, Leslie A.

    1986-01-01

    Presents an overview of the Computer-Aided Engineering Network (CAEN) of the University of Michigan. Describes its arrangement of workstations, communication networks, and servers. Outlines the factors considered in hardware and software decision making. Reviews the program's impact on students. (ML)

  13. Current situation of nuclear engineering education

    Queral, C.; Minguez, E.

    2001-01-01

    The last few years have seen a growing concern with the decreasing number of suitably qualified engineers and university graduates in the field of Nuclear Technology. The gap between supply and demand is now a fact in several countries, and for the reason the international community has prepared several reports on the issue that are summarized here. (Author) 4 refs

  14. NATIONAL IDENTITY IN THE VENEZUELAN UNIVERSITY EDUCATION

    Nércida Romer

    2011-07-01

    Full Text Available The research had as main purpose to analyze the national identity in the Venezuelan University education. It was descriptive with descriptive transactional design. The population was 250 students of the IX and X semester of education at the UNERMB, Ciudad Ojeda. The results showed: in the objective test, they don’t know details of the national identity; It was detected in the interview that there is a sense of belonging. The recommendation is: in subjects related innovate strategies to give the student knowledge of national identity elements; promote educational and publicity campaigns about the care and conservation of geographical, biological and cultural heritage.

  15. Nuclear engineering education in the United States

    Williamson, T.G.

    1982-01-01

    The critical issue facing the nuclear engineering education community today is first and foremost enrollment in a time of increasing demand for graduate engineers. Related to the issue of enrollment is support for graduate students, whether it be fellowships, traineeships, or research assistantships. Other issues are those of maintaining a vital faculty in the face of competitive job market, of maintaining research facilities and developing new ones, and last and certainly not least that of determining the directions of our educational efforts in the future. These issues are examined in the paper. (author)

  16. The Universal and the Particular in Education.

    Partington, Geoffrey

    2000-01-01

    Compares two historical reactions from universalism to particularism: (1) the Enlightenment and its rejection by nationalism and romanticism; and (2) liberal education and its rejection as imperialist and patriarchal. Explores the relationships between the West and three groups (South Pacific Islanders, Maori, and Aborigines) that were…

  17. Teaching Engineering Habits of Mind in Technology Education

    Loveland, Thomas; Dunn, Derrek

    2014-01-01

    With a new emphasis on the inclusion of engineering content and practices in technology education, attention has focused on what engineering content should be taught and assessed in technology education. The National Academy of Engineering (2010) proposed three general principles for K-12 engineering education in "Standards for K-12…

  18. Engineering Education: A Clear Decision

    Strimel, Greg J.; Grubbs, Michael E.; Wells, John G.

    2017-01-01

    The core subjects in P-12 education have a common key characteristic that makes them stable over time. That characteristic is a steady content. For example, in the sciences, the basics of biology remain the same--the cell is the basic building block around which organisms are defined, characterized, structured, etc. Similarly, the basics of…

  19. The challenge of reframing engineering education

    Sale, Dennis

    2014-01-01

    The Challenge of Reframing Engineering Education is the first book to document the experience of implementing the CDIO Engineering Educational Framework in a large educational institution in the Asian context. It focuses on how to successfully implement and manage the key stages, activities and inevitable challenges that have to be negotiated in any large scale curriculum innovation. Its main purpose is to provide a practical resource for curriculum innovators and practitioners on what needs to be done, how and on what basis. It is written in a more narrative style than is typical of the genre, engaging the reader more intimately with the actual decision making processes and rationale that underpins curriculum innovation in the real context of institutional life. The book also encompasses many innovative practices for supporting student learning which are relevant in all mainstream educational contexts. These include an evidence-based learning approach for creative teaching, an explicit model for developing g...

  20. Examination of engineering design teacher self-efficacy and knowledge base in secondary technology education and engineering-related courses

    Vessel, Kanika Nicole

    2011-12-01

    There is an increasing demand for individuals with engineering education and skills of varying fields in everyday life. With the proper education students of high-needs schools can help meet the demand for a highly skilled and educated workforce. Researchers have assumed the supply and demand has not been met within the engineering workforce as a result of students' collegiate educational experiences, which are impacted by experiences in K-12 education. Although factors outside of the classroom contribute to the inability of universities to meet the increasing demand for the engineering workforce, most noted by researchers is the academic unpreparedness of freshman engineering students. The unpreparedness of entering freshman engineering students is a result of K-12 classroom experiences. This draws attention not only to the quality and competence of teachers present in the K-12 classroom, but the type of engineering instruction these students are receiving. This paper was an effort to systematically address one of the more direct and immediate factors impacting freshman engineering candidates, the quality of secondary engineering educators. Engineers develop new ideas using the engineering design process, which is taught at the collegiate level, and has been argued to be the best approach to teach technological literacy to all K-12 students. However, it is of importance to investigate whether technology educators have the knowledge and understanding of engineering design, how to transfer that knowledge in the classroom to students through instructional strategies, and their perception of their ability to do that. Therefore, the purpose of this study is to show the need for examining the degree to which technology and non-technology educators are implementing elements of engineering design in the curriculum.

  1. Collaborative Learning at Engineering Universities: Benefits and Challenges

    Olga V. Sumtsova; Tatiana Yu. Aikina; Liudmila M. Bolsunovskaya; Chris Phillips; Olga M. Zubkova; Peter J. Mitchell

    2018-01-01

    This paper concerns the cutting edge educational approaches incorporated into syllabuses of the most progressive Russian higher technical schools. The authors discuss one of the active methods in teaching foreign languages – collaborative learning implemented in e-courses. Theoretical and historical aspects of this approach are addressed, as are its suitability for engineering education and possible ways of introducing collaborative learning into e-courses. Collaborative learning technology o...

  2. Using Computers in Fluids Engineering Education

    Benson, Thomas J.

    1998-01-01

    Three approaches for using computers to improve basic fluids engineering education are presented. The use of computational fluid dynamics solutions to fundamental flow problems is discussed. The use of interactive, highly graphical software which operates on either a modern workstation or personal computer is highlighted. And finally, the development of 'textbooks' and teaching aids which are used and distributed on the World Wide Web is described. Arguments for and against this technology as applied to undergraduate education are also discussed.

  3. Teaching WWERs at Hacettepe University Nuclear Engineering Department in Turkey

    Ergun, S.

    2011-01-01

    In this study, the challenges faced in the teaching WWER design for the reactor engineering course, which is taught in the Hcettepe University Nuclear Engineering Department are discussed. Since the course is designated taking a western reactor design into account, the computer programs and class projects prepared for the course include models and correlations suitable for these designs. The attempts for modifying the course and developing codes or programs for the course become a challenge especially in finding proper information sources on design in English. From finding proper material properties to exploring the design ideas, teaching WWER designs and using analysis tools for better teaching are very important to modify the reactor engineering course. With the study presented here, the reactor engineering course taught is described, the teaching tools are listed and attempts of modifying the course to teach and analyze WWER designs are explained

  4. University and non-formal education

    Popescu Liliana Georgeta

    2017-01-01

    Full Text Available Young students place great importance on their personal, professional and educational development alike but in the same time are actively involved in leisure activities. Through non-formal and informal activities the university can help students to develop new skills, can change or increase certain preferences regarding cultural consumption, sports and recreational activities. This paper presents the results of a study based on students attending universities across three cities. It aims to demonstrate that during the years spent at university, students are significantly less influenced by their parents in terms of behaviour and cultural preferences; instead these aspects as well as recreational activities are undertaken by universities and their group of friends and colleagues. For a meaningful analysis and correct interpretation of data, specific tools of quality management were used.

  5. Engineering Education and Students' Challenges: Strategies toward Enhancing the Educational Environment in Engineering Colleges

    Alkandari, Nabila Y.

    2014-01-01

    The main goal of this research is to gain an understanding of the challenges which have to be confronted by the engineering students at the College of Engineering and Petroleum at Kuwait University. The college has a large number of students, of which three hundred and eighty five were selected on a random basis for study purposes. The results…

  6. Nuclear education and international nuclear university

    Kang, C.S.

    2000-01-01

    In this paper author deals with the concept of establishing the International Nuclear University (INU) would be one of the most viable options. The INU would provide young professionals with not only university-level education but also high-skill training in the fields of nuclear technology. The program will emphasize on global and multi- disciplinary perspectives, which should offer our young generation broader opportunities of advanced education and motivate professional staffs in the enhancement of their knowledge and skills. The 'World Council of Nuclear Education' could be formed to steer the INU for close international cooperation under the auspices of the IAEA. The INU would organize a world network of existing nuclear- related educational organizations and training centers which already exist in Member States. Existing facilities and can be utilized at maximum. Use of cyber-lecturing through Internet, cross-approval of credits among educational organizations in degree work, certification of credits by the authorized body like IAEA, human resources placement services, etc. are some of the activities that the INU could provide in addition to its professional training and higher education. (authors)

  7. An Ontology for Software Engineering Education

    Ling, Thong Chee; Jusoh, Yusmadi Yah; Adbullah, Rusli; Alwi, Nor Hayati

    2013-01-01

    Software agents communicate using ontology. It is important to build an ontology for specific domain such as Software Engineering Education. Building an ontology from scratch is not only hard, but also incur much time and cost. This study aims to propose an ontology through adaptation of the existing ontology which is originally built based on a…

  8. The Future of Engineering Education--Revisited

    Wankat, Phillip C.; Bullard, Lisa G.

    2016-01-01

    This paper revisits the landmark CEE series, "The Future of Engineering Education," published in 2000 (available free in the CEE archives on the internet) to examine the predictions made in the original paper as well as the tools and approaches documented. Most of the advice offered in the original series remains current. Despite new…

  9. Spatial Ability through Engineering Graphics Education

    Marunic, Gordana; Glazar, Vladimir

    2013-01-01

    Spatial ability has been confirmed to be of particular importance for successful engineering graphics education and to be a component of human intelligence that can be improved through instruction and training. Consequently, the creation and communication by means of graphics demand careful development of spatial skills provided by the balanced…

  10. Engineering Education as a Complex System

    Gattie, David K.; Kellam, Nadia N.; Schramski, John R.; Walther, Joachim

    2011-01-01

    This paper presents a theoretical basis for cultivating engineering education as a complex system that will prepare students to think critically and make decisions with regard to poorly understood, ill-structured issues. Integral to this theoretical basis is a solution space construct developed and presented as a benchmark for evaluating…

  11. CDIO-CONCEPT FOR ENGINEERING EDUCATION

    Conrad, Finn

    2005-01-01

    The paper presents significant good Danish experiment results of a developed CDIO-Concept and approach for active and integrated learning in today’s engineering education of MSc Degree students, and research results from using IT-Tools for CAE/CAD and dynamic modelling, simulation, analysis...

  12. Engineering Design EDUCATION: When, What, and HOW

    Khalaf, Kinda; Balawi, Shadi; Hitt, George Wesley; Radaideh, Ahmad

    2013-01-01

    This paper presents an innovative, interdisciplinary, design-and-build course created to improve placement, content, and pedagogy for introductory engineering design education. Infused at the freshman level, the course aims to promote expert design thinking by using problem-based learning (PBL) as the mode of delivery. The course is structured to…

  13. Motivating students in engineering & ICT education

    Ir. Peter van Kollenburg; Ir. Dick van Schenk Brill

    2009-01-01

    We found out that 25 % of our students came to study at the Electrical & Electronic Engineering department (E&E) because they were active (as a hobby) in music. Because of this the E&E department offers their students to work in video and audio themes in all projects of their education. From our

  14. Problem Based Learning in Engineering Education

    Dahms, Mona-Lisa; Sauerbier, Gabriele; Stubbe, Korinna

    2006-01-01

    This paper describes a recent EU-project from five European Institutions. The aim was the development and implementation of a new international Master’s programme for staff development, directed towards the introduction of Problem Based Learning methods in the field of engineering education...

  15. Russian University Education in Nuclear Safeguards and Security

    Duncan, Cristen L.; Kryuchkov, Eduard F.; Geraskin, Nikolay I.; Boiko, Vladimir I.; Silaev, Maxim E.; Demyanyuk, Dmitry G.; Killinger, Mark H.; Heinberg, Cynthia L.

    2009-01-01

    As safeguards and security (S and S) systems are installed and upgraded in nuclear facilities throughout Russia, it becomes increasingly important to develop mechanisms for educating future Russian nuclear scientists and engineers in the technologies and methodologies of physical protection (PP) and nuclear material control and accounting (MC and A). As part of the U.S. Department of Energy's (DOE) program to secure nuclear materials in Russia, the Education Project supports technical S and S degree programs at key Russian universities and nonproliferation education initiatives throughout the Russian Federation that are necessary to achieve the overall objective of fostering qualified and vigilant Russian S and S personnel. The Education Project supports major educational degree programs at the Moscow Engineering Physics Institute (MEPhI) and Tomsk Polytechnic University (TPU). The S and S Graduate Program is available only at MEPhI and is the world's first S and S degree program. Ten classes of students have graduated with a total of 79 Masters Degrees as of early 2009. At least 84% of the graduates over the ten years are still working in the S and S field. Most work at government agencies or research organizations, and some are pursuing their PhD. A 5 and 1/2 year Engineering Degree Program (EDP) in S and S is currently under development at MEPhI and TPU. The EDP is more tailored to the needs of nuclear facilities. The program's first students (14) graduated from MEPhI in February 2007. Similar-sized classes are graduating from MEPhI each February. All of the EDP graduates are working in the S and S field, many at nuclear facilities. TPU also established an EDP and graduated its first class of approximately 18 students in February 2009. For each of these degree programs, the American project team works with MEPhI and TPU to develop appropriate curriculum, identify and acquire various training aids, develop and publish textbooks, and strengthen instructor skills

  16. A Comparison of the mechanical engineering and safety engineering student’s ICT attitudes at the Obuda University

    Kiss Gabor

    2016-01-01

    Full Text Available Communication and technology are critical to education. However, using technology in education is not an easy task as communication barriers emerge. The aim of this research is to analyze the ICT attitudes from different faculties at the Obuda University that is between the mechanical engineering students and safety engineering students from the Donát Bánki Mechanical Safety Engineer Faculty. The students from these two groups will use different ICT tool at work after their graduation; the mechanical engineering students will work mostly with designer ICT tools, the safety engineering students will use security systems. It would be important to know whether instructors, when using ICT, have to follow different teaching methods and approaches in these two different groups or not. We measured the ICT attitude with a tool consisting of 23 items (Likert scaled. We worked with 361 students. The data analysis was performed with SPSS software using descriptive statistics and Mann-Whitney test. The results show both groups having the same positive ICT attitude however with one difference.

  17. Engineering of educational programs through the application of intelligent technologies

    Mikhail S. Gasparian

    2017-01-01

    Full Text Available One of the key tasks of the present stage of the education system development in Russia is to improve the practical orientation of specialists’ training for the modern labor market. On the agenda, there are the issues of modernization of educational programs in the direction of a closer relationship between education and professional standards, which is the main purpose of this study.Rapidly changing business needs, especially in the field of the booming ITindustry indicate the need for continuous improvement of mechanisms for the acquisition of new knowledge, abilities and skills of students, which in turn requires the development of special tools for the development of educational technologies. The article discusses the issues of flexible engineering education programs of higher education in accordance with the needs of the labour market, presented in professional standards. The methods of semantic modeling of informational and educational space, allowing to systematize the knowledge of the professional area in the form of conceptual models of ontologies and repositories of learning objects are offered as the methods of engineering.As the result of the correlation analysis of the categories of existing educational and professional standards, the mechanism to overcome the contradictions between the language of professional competences of educational standards and requirements of the labour functions of the professional standards is proposed. The paper describes the characteristics of the knowledge and skills of educational programs in the categories: scope, sphere and types of tasks of professional activities.The professional competences are differentiated due to profiles of training and types of professional tasks.The proposed universal algorithm for the development of educational programs of profile training on the base of the analysis of generalized labour functions and labour functions of professional standards can be useful to

  18. Use of university research reactors to teach control engineering

    Bernard, J.A.

    1991-01-01

    University research reactors (URRs) have provided generations of students with the opportunity to receive instruction and do hands-on work in reactor dynamics, neutron scattering, health physics, and neutron activation analysis. Given that many URRs are currently converting to programmable control systems, the opportunity now exists to provide a similar learning experience to those studying systems control engineering. That possibility is examined here with emphasis on the need for the inclusion of experiment in control engineering curricula, the type of activities that could be performed, and safety considerations

  19. Study on the continuing education innovative talents training mode of civil engineering major

    Sun, Shengnan; Su, Zhibin; Cui, Shicai

    2017-12-01

    According to the characteristics of civil engineering professional continuing education, continuing education of innovative talents training mode suitable for the characteristics of our school is put forward in this paper. The characteristics of the model include: the education of professional basic courses and specialized courses should be paid attention to; engineering training should be strengthened and engineering quality should be trained; the concept of large civil engineering should be highlighted, the specialized areas should be broadened, and the curriculum system should be reconstructed; the mechanism of personnel training program should be constructed by the employers, the domestic highlevel institutions and our university. It is hoped that the new training model will promote the development of continuing education of civil engineering specialty in our university.

  20. Fifty years experiences in nuclear engineering education at Tokyo Institute of Technology

    Fujii, Yasuhiko; Saito, Masaki; Aritomi, Masanori

    2008-01-01

    Nuclear engineering education has been initiated in 1957 at the graduate school of Tokyo Institute of Technology. Educational activities have been conducted for fifty years under the support of the Research Laboratory for Nuclear Reactors. In the past fifty years, about 1000 Master students and 200 Doctoral students and 200 Doctoral students graduated from our Nuclear Engineering Department at Tokyo Institute of Technology. Many of them found their jobs in nuclear industries and institutes. International course of nuclear engineering was initiated in 1994, and so far about 90 students from 15 overseas countries have graduated from our Master and Doctoral Programs. In 2003, our proposal of 'Innovative Nuclear Energy System for the Sustainable World' was adopted as the Center of Excellent Program sponsored by Ministry of Education, Science and Technology. Recently a collaborative education network has been developed among Kanazawa University, Fukui University, Ibaraki University, Okayama University, Tokyo Institute of Technology and Japan Atomic Energy Agency. (author)

  1. Training of engineering support personnel at North Carolina State University

    Bohannon, J.R. Jr.

    1975-01-01

    The sources of planning for the development of curricula for engineering support personnel for the nuclear industry in general and nuclear facilities in particular have included the deliberate acquisition of inputs from employers, feedback from past students, and the critique of curricula by the industry, students, and faculty. As a result, three principal courses were developed in the Department of Nuclear Engineering, namely, Reactor Systems which deals in terms of the design engineer's and owner's concerns with regard to functional requirements, design criteria, and objectives of reactor systems; Reactor Operations which applies the student's basic engineering education to the role of an engineer in nuclear facilities, with particular attention to power plant operations; and Quality Assurance which provides the student with the bases, engineering implications and engineer's role in quality assurance during the design, construction, delivery and operation of nuclear and other complex facilities. A summary of the results to date of this trinity of courses is presented, with particular attention to its acceptance by the industry

  2. Learning analytics: Dataset for empirical evaluation of entry requirements into engineering undergraduate programs in a Nigerian university.

    Odukoya, Jonathan A; Popoola, Segun I; Atayero, Aderemi A; Omole, David O; Badejo, Joke A; John, Temitope M; Olowo, Olalekan O

    2018-04-01

    corresponding academic performance in engineering programs. The data provided in this article will help Nigerian universities, the NUC, engineering regulatory bodies, and relevant stakeholders to objectively evaluate and subsequently improve the quality of engineering education in the country.

  3. Enabling performance skills: Assessment in engineering education

    Ferrone, Jenny Kristina

    Current reform in engineering education is part of a national trend emphasizing student learning as well as accountability in instruction. Assessing student performance to demonstrate accountability has become a necessity in academia. In newly adopted criterion proposed by the Accreditation Board for Engineering and Technology (ABET), undergraduates are expected to demonstrate proficiency in outcomes considered essential for graduating engineers. The case study was designed as a formative evaluation of freshman engineering students to assess the perceived effectiveness of performance skills in a design laboratory environment. The mixed methodology used both quantitative and qualitative approaches to assess students' performance skills and congruency among the respondents, based on individual, team, and faculty perceptions of team effectiveness in three ABET areas: Communications Skills. Design Skills, and Teamwork. The findings of the research were used to address future use of the assessment tool and process. The results of the study found statistically significant differences in perceptions of Teamwork Skills (p performance skills, such as teamwork, among freshman engineering students; (2) incorporate feedback into the learning process; (3) strengthen the assessment process with a follow-up plan that specifically targets performance skill deficiencies, and (4) integrate the assessment instrument and practice with ongoing curriculum development. The findings generated by this study provides engineering departments engaged in assessment activity, opportunity to reflect, refine, and develop their programs as it continues. It also extends research on ABET competencies of engineering students in an under-investigated topic of factors correlated with team processes, behavior, and student learning.

  4. Reactor laboratory course for students majoring in nuclear engineering with the Kyoto University Critical Assembly (KUCA)

    Nishihara, H.; Shiroya, S.; Kanda, K.

    1996-01-01

    With the use of the Kyoto University Critical Assembly (KUCA), a joint reactor laboratory course of graduate level is offered every summer since 1975 by nine associated Japanese universities (Hokkaido University, Tohoku University, Tokyo Institute of Technology, Musashi Institute of Technology, Tokai University, Nagoya University, Osaka University, Kobe University of Mercantile Marine and Kyushu University) in addition to a reactor laboratory course of undergraduate level for Kyoto University. These courses are opened for three weeks (two weeks for the joint course and one week for the undergraduate course) to students majoring in nuclear engineering and a total of 1,360 students have taken the course in the last 21 years. The joint course has been institutionalized with the background that it is extremely difficult for a single university in Japan to have her own research or training reactor. By their effort, the united faculty team of the joint course have succeeded in giving an effective, unique one-week course, taking advantage of their collaboration. Last year, an enquete (questionnaire survey) was conducted to survey the needs for the educational experiments of graduate level and precious data have been obtained for promoting reactor laboratory courses. (author)

  5. Physics and Physics Education at Clarion University

    Aravind, Vasudeva

    Clarion University is located in the rolling hills of western Pennsylvania. We are a primarily undergraduate public institution serving about 6000 students. We graduate students who take different career paths, one of them being teaching physics at high schools. Since educating teachers of tomorrow requires us to introduce currently trending, research proven pedagogical methods, we incorporate several aspects of physics pedagogies such as peer instruction, flipped classroom and hands on experimentation in a studio physics lab format. In this talk, I discuss some of our projects on physics education, and seek to find potential collaborators interested in working along similar lines.

  6. Status of University of Cincinnati reactor-site nuclear engineering graduate programs

    Anno, J.N.; Christenson, J.M.; Eckart, L.E.

    1993-01-01

    The University of Cincinnati (UC) nuclear engineering program faculty has now had 12 yr of experience in delivering reactor-site educational programs to nuclear power plant technical personnel. Currently, with the sponsorship of the Toledo-Edison Company (TED), we are conducting a multiyear on-site graduate program with more than 30 participants at the Davis-Besse nuclear power plant. The program enables TED employees with the proper academic background to earn a master of science (MS) degree in nuclear engineering (mechanical engineering option). This paper presents a brief history of tile evolution of UC reactor-site educational programs together with a description of the progress of the current program

  7. Role of hydrogen on engineering education. ICHET example

    Yazici, M. Suha [International Centre for Hydrogen Energy Technologies, Istanbul (Turkey)

    2010-07-01

    International Center for Hydrogen Energy Technologies (ICHET) has been successfully supporting engineering students with practical experience on ''hydrogen and fuel cell systems built upon their theoretical engineering learning through classroom. A series of activities designed to increase the knowledge and awareness of engineering students and advancedresearchers has been implemented. These activities can be classified under meetings, system integration and training activities. Meeting activities include short courses, technology specific workshops and conferences, sponsorships and summer schools. System integration for prototype demonstrations forms the basis for hand-on practical learning through university-industry collaboration, demonstration activities and application specific supports. Training activities involve internships, part-time employment and laboratory educations. All these activities facilitate knowledge transfer, exchange of information at regional, national and international levels and involve academics, researchers, experts and service providers to further develop their knowledge and interest on hydrogen energy technologies. (orig.)

  8. Clinical Immersion and Biomedical Engineering Design Education: "Engineering Grand Rounds".

    Walker, Matthew; Churchwell, André L

    2016-03-01

    Grand Rounds is a ritual of medical education and inpatient care comprised of presenting the medical problems and treatment of a patient to an audience of physicians, residents, and medical students. Traditionally, the patient would be in attendance for the presentation and would answer questions. Grand Rounds has evolved considerably over the years with most sessions being didactic-rarely having a patient present (although, in some instances, an actor will portray the patient). Other members of the team, such as nurses, nurse practitioners, and biomedical engineers, are not traditionally involved in the formal teaching process. In this study we examine the rapid ideation in a clinical setting to forge a system of cross talk between engineers and physicians as a steady state at the praxis of ideation and implementation.

  9. Educating Future Engineers and the Image of Technology : Applying the Philosophy of Technology to Engineering Education

    Ghaemi Nia, M.M.

    2017-01-01

    This thesis deals with the matter of making reforms in engineering education, and it highlights the significance of delivering a more comprehensive image of technology and its different aspects in the course of training students about technology and engineering. The innovative contribution of the

  10. Engineers are from Mars and educators are from Venus: Research ...

    ... are from Venus: Research supervision in engineering and educational collaboration. ... The projects usually entailed an interdisciplinary thesis that addressed an ... in chemical engineering, the work-readiness of civil engineering students, ...

  11. Distance Education at Silesian University of Technology

    Piotr Klosowski

    2008-12-01

    Full Text Available This paper presents Distance Learning Platform used by Silesian University of Technology. Distance Learning Platform is based on modular object-oriented dynamic learning environment, represents LMS (Learning Management Systems technology, a software package designed to help educators create quality online courses. Currently on Distance Learning Platform at Silesian University of Technology are available over 520 online courses created for students of twelve University's faculties. Number of Distance Learning Platform users exceeds 12000. Distance Learning Platform works as typically asynchronous e-learning service, but in the future more synchronous e-learning services will be added. Distance Learning Platform has great potential to create a successful elearning experience by providing a plethora of excellent tools that can be used to enhance conventional classroom instruction, in hybrid courses, or any distance learning arrangements.

  12. Inventing Problems for Technical Solutions – The Co-production of Universities, Skills and Engineering Challenges

    Juhl, Joakim; Buch, Anders

    institution building where business and management competencies are incorporated to engineering curricula. By comparing experiences from early career alumni from educations that are results of moving engineering institutions into business, we analyze the consequences imposed by changing disciplinary...... of innovation. In the recent two decades, universities and other engineering institutions that are typically identified with technology development have expanded their research and teaching activities towards the business end of innovation. Purpose This paper investigates the new emergent trend in academic...... demarcations within academic and professional engineering knowledges. Theoretical and methodological framework The paper draws upon theoretical frameworks from Practice Theory (e.g. as developed by Theodore Schatzki, Stephen Kemmis et al.), and co-production and sociotechnical imaginaries from Science...

  13. Digital dissemination platform of transportation engineering education materials.

    2014-09-01

    National agencies have called for more widespread adoption of best practices in engineering education. To facilitate this sharing of practices we will develop a web-based system that will be used by transportation engineering educators to share curri...

  14. Getting Context Back in Engineering Education

    Buch, Anders; Bucciarelli, Louis

    2015-01-01

    Discussions about reform in engineering education have mainly centered on issues of curriculum and didactics but these discussions rarely address fundamental questions about the nature and character of knowledge and learning. This neglect has led the discussions down the wrong track and failed...... to critique implicit and inadequate conceptions of knowledge and learning. Our discussion will draw upon John Dewey’s philosophy of human experience and inquiry as a resource that can remedy the neglect. This chapter thus focuses on learning and by example proposes ways that engineering knowledge and skills...

  15. Development of Mechanical Engineering Curricula at the University of Minho

    Teixeira, Jose Carlos Fernandes; da Silva, Jaime Ferreira; Flores, Paulo

    2007-01-01

    The implementation of the Bologna protocol in the European Union has set new goals for the whole higher education system as: (a) a quality assessment for university courses; (b) a framework for the exchange of students and academics; and (c) an opportunity for changing the teaching/learning procedures and methodologies. Within the context, the…

  16. Push or Pull Students into Blended Education A Case Study at Delft University of Technology

    Cervone, A.; Melkert, J.A.; Mebus, L.F.M.; Saunders, G.N.

    2016-01-01

    Blended education, or “flipping the classroom” is rapidly becoming a mainstream form of teaching within universities. Within Engineering Education, it is popular as it allows more time in-class to focus on hands on activities such as demonstrations and solving complex problems. This paper discusses

  17. Progreen Online Engineering Diploma in the Middle East: Assessment of the Educational Experience

    Baytiyeh, Hoda

    2018-01-01

    Little is known about the status of online learning in the Middle East. This study investigates educational experiences of engineers enrolled in the new joint online ProGreen diploma programme offered by three universities, two in Lebanon and one in Egypt. Forty-eight working engineers responded to an online survey based on the three components of…

  18. A Holistic Approach to Delivering Sustainable Design Education in Civil Engineering

    Vemury, Chandra Mouli; Heidrich, Oliver; Thorpe, Neil; Crosbie, Tracey

    2018-01-01

    Purpose: The purpose of this paper is to present pedagogical approaches developed and implemented to deliver sustainable design education (SDE) to second-year undergraduate students on civil engineering programmes in the (then) School of Civil Engineering and Geosciences at Newcastle University. In doing so, the work presented offers an example of…

  19. PROJECT CENTERED COMPETENCE RELATED EDUCATION OF ENGINEERS

    Ir. Peter van Kollenburg; Ing. Coert Bouten; Ir. Reinder Bakker

    2007-01-01

    ABSTRACT It has become a topic at Dutch educational institutes to feel not only responsible for improvement of theoretical and practical skills, but also of 'competences' in a wider sense. The curriculum of the Fontys University of Applied Sciences (32.000 students) and especially the Electrical and

  20. Moral education and citizenship education at pre-university schools

    Leenders, H.; Veugelers, W.; de Kat, E.; Oser, F.; Veugelers, W.

    2008-01-01

    This survey investigates the objectives, practical application and learning outcomes of moral education at three pre-university (VWO) schools with differing views on citizenship. We explore teachers’ and students’ pedagogical, socialpolitical and moral development objectives, and how they deal with

  1. How Mockups, a Key Engineering Tool, Help to Promote Science, Technology, Engineering, and Mathematics Education

    McDonald, Harry E.

    2010-01-01

    The United States ranking among the world in science, technology, engineering, and mathematics (STEM) education is decreasing. To counteract this problem NASA has made it part of its mission to promote STEM education among the nation s youth. Mockups can serve as a great tool when promoting STEM education in America. The Orion Cockpit Working Group has created a new program called Students Shaping America s Next Space Craft (SSANS) to outfit the Medium Fidelity Orion Mockup. SSANS will challenge the students to come up with unique designs to represent the flight design hardware. There are two main types of project packages created by SSANS, those for high school students and those for university students. The high school projects will challenge wood shop, metal shop and pre-engineering classes. The university projects are created mainly for senior design projects and will require the students to perform finite element analysis. These projects will also challenge the undergraduate students in material selection and safety requirements. The SSANS program will help NASA in its mission to promote STEM education, and will help to shape our nations youth into the next generation of STEM leaders.

  2. Principles of education and training of plant engineers for nuclear power stations

    Ackermann, G.; Meyer, K.; Brune, W.

    1978-01-01

    Experience in education and advanced training of nuclear engineers in the GDR is reviewed. The basic education of engineers is carried out at universities and colleges. Graduate engineers who have been working in non-nuclear industries for a longer time receive their basic education in nuclear engineering through postgraduate studies. Graduate engineers with a basic knowledge of nuclear engineering are trained at the Nuclear Power Plant School of the Rheinsberg nuclear power plant and at the nuclear power plants of the GDR under operational conditions relating to their future job. In addition to basic theoretical knowledge, training at a nuclear power plant simulator plays an important role. This permits training of the staff under normal operating conditions including transient processes and under unusual conditions. Further particular modes of advanced professional training such as courses in radiation protection and further postgraduate studies are described. This system of education has proved successful. It will be developed further to meet the growing demands. (author)

  3. Geoscience Education Research, Development, and Practice at Arizona State University

    Semken, S. C.; Reynolds, S. J.; Johnson, J.; Baker, D. R.; Luft, J.; Middleton, J.

    2009-12-01

    Geoscience education research and professional development thrive in an authentically trans-disciplinary environment at Arizona State University (ASU), benefiting from a long history of mutual professional respect and collaboration among STEM disciplinary researchers and STEM education researchers--many of whom hold national and international stature. Earth science education majors (pre-service teachers), geoscience-education graduate students, and practicing STEM teachers richly benefit from this interaction, which includes team teaching of methods and research courses, joint mentoring of graduate students, and collaboration on professional development projects and externally funded research. The geologically, culturally, and historically rich Southwest offers a superb setting for studies of formal and informal teaching and learning, and ASU graduates the most STEM teachers of any university in the region. Research on geoscience teaching and learning at ASU is primarily conducted by three geoscience faculty in the School of Earth and Space Exploration and three science-education faculty in the Mary Lou Fulton Institute and Graduate School of Education. Additional collaborators are based in the College of Teacher Education and Leadership, other STEM schools and departments, and the Center for Research on Education in Science, Mathematics, Engineering, and Technology (CRESMET). Funding sources include NSF, NASA, US Dept Ed, Arizona Board of Regents, and corporations such as Resolution Copper. Current areas of active research at ASU include: Visualization in geoscience learning; Place attachment and sense of place in geoscience learning; Affective domain in geoscience learning; Culturally based differences in geoscience concepts; Use of annotated concept sketches in learning, teaching, and assessment; Student interactions with textbooks in introductory courses; Strategic recruitment and retention of secondary-school Earth science teachers; Research-based professional

  4. Alternative Sources of Funding University Education in Nigeria

    Nekky Umera

    university students view some alternative sources of funding university education ... Education Scientific and Cultural Organization (UNESCO) programme is still ... questionnaire centred on eliciting information on the 15 earlier stated alternate ...

  5. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1990

    1991-01-01

    In this annual report, the activities of research and education and the state of operation of the research facilities in this Laboratory in fiscal year 1990 are summarized. There are four large research facilities in this Laboratory, that is, the fast neutron source reactor 'Yayoi', the electron beam linear accelerator, the nuclear fusion reactor blanket experiment device and the heavy ion irradiation research facility. Those are used to execute research and education in the wide fields of atomic energy engineering, and put to the common utilization by universities in whole Japan. The results of the research with these facilities have been reported in the separate reports. The research aims at developing the most advanced and new fields in nuclear reactor engineering, and includes the engineering of the first wall and the fuel cycle for nuclear fusion reactors, electromagnetic structure engineering, AI and robotics, quantum beam engineering, the design of new type reactors, the basic process of radiochemistry and so on. The report on the course of the large scale facilities, research activities, the publication of research, education and the events in the Laboratory in the year are described. (K.I.)

  6. A Qualitative Research on Educational Fields on which Universities Positioned Themselves in Turkey

    Kahraman ÇATI

    2016-10-01

    Full Text Available The aim of this study is to determine the educational fields on which universities position themselves in Turkey. The population of the research consists of state and private universities in Turkey. In this study, qualitative research design was used and data were collected by document review technique.The research data was obtained by analyzing introductory videos of universities in their websites. In this context, 90 introductory videos of universities were collected. The data obtained was analyzed with descriptive analysis technique. the result of the study showed that 49 out of 90 universities positioned themselves in the field of education. Medical, engineering, and economics and administrative sciences were mostly emphasized educational fields. The result of the study led to the conclusion, 41 universities analyzing introductory videos did not position themselves in the field of education.

  7. Annual report of Radiation Laboratory Department of Nuclear Engineering Faculty of Engineering, Kyoto University

    1993-07-01

    This publication is the collection of the papers presented research activities of Radiation laboratory, Department of Nuclear Engineering, Kyoto University during the 1992 academic/fiscal year (April, 1992 - March, 1993). The 48 of the presented papers are indexed individually. (J.P.N.)

  8. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1991

    1992-07-01

    In this annual report, the activities of education and research, the state of operation of research facilities and others in Nuclear Engineering Research Laboratory, University of Tokyo in fiscal year 1991 are summarized. In this Laboratory, there are four large research facilities, that is, the fast neutron source reactor 'Yayoi', the electron beam linac, the nuclear fusion reactor blanket experiment facility and the heavy irradiation research facility. Those are used for carrying out education and research in the wide fields of nuclear engineering, and are offered also for joint utilization. The results of the research by using respective research facilities were summarized in separate reports. In this annual report, the course of the management and operation of respective research facilities is described, and the research activities, the theses for doctorate and graduation theses of the teachers, personnel and graduate students in the Laboratory are summarized. In the research, those on first wall engineering for fusion reactors, fuel cycle engineering, electromagnetic structure engineering, AI and robotics, quantum beam engineering, new type reactor design and so on are included. (K.I.)

  9. Educating engineering practice in six design projects in a row

    Kamp, A.

    2013-01-01

    Tomorrow’s engineers are required to have a good balance between deep working knowledge of engineering sciences and engineering skills. In the Bachelor in Aerospace Engineering at TU Delft, students are educated to master these competences so that they are ready to engineer when they graduate. The

  10. INNOVATION RESEARCH OF MORAL EDUCATION BASED ON EXCELLENCE ENGINEER TRAINING PROGRAM

    Hong-Mei Li

    2013-12-01

    Full Text Available Many colleges and universities in China have clearly realized that in the process of operating the “Project for Educating and Nurturing Outstanding Engineers”(PENOE, the old educational contents and methods are not suitable for the new developing moral education anymore. Accordingly, as the engineering education is going into reform, it’s necessary to make a change and improve the contents and methods in order to help accelerate the reform as well as achieve the educational goals. The paper briefly explains and discusses the theories of PENOE and moral education at the beginning of the thesis; further more, with the reform of engineering education as the background, this paper analysis the issues that exist in moral education in colleges and universities  and debates why they exist in the first place and comes up with a conclusion and several solutions to solving the issues in the end.

  11. The historical evolution of university and technikon education and ...

    The article discusses articulation between university and technikon LIS education and training in the context of the historical evolution and traditional purposes of university and technikon education and training; major similarities and differences between university and technikon LIS education and training and current ...

  12. Universal Basic Education Policy: Impact on Enrolment and Retention

    Iddrisu, Issah

    2016-01-01

    The universal basic education policy enshrined in the constitution of Ghana is aimed at making education accessible and affordable for all Ghanaian citizens. This paper sought to assess whether the universal basic education policy really have an impact on access at the basic level. The study was carried out on the premise that the universal basic…

  13. The Role of Environmental Engineering Education in Sustainable Development in Iran: AUT Experience

    Moghaddam, M. R. Alavi; Taher-shamsi, A.; Maknoun, R.

    2007-01-01

    Purpose: The aim of this paper is to explain the strategies and activities of a main technical University in Iran (Amirkabir University of Technology (AUT)) toward sustainable development goals. Design/methodology/approach: In this paper, three main strategies of AUT to achieve sustainable developments goals in engineering education are explained.…

  14. Round table discussion 'nuclear engineering education viewed from the industry stand point'

    1980-01-01

    With a short introduction of the present status of recruitment, on the job training programs for graduates from university are presented by several utilities and engineering constructors of nuclear power plant. Their opinions are given on the educational requirements which are considered most beneficial to the successful conduct of practical work. Comments are made by university professors and research scientists. (author)

  15. Possibility of Engineering Education That Makes Use of Algebraic Calculators by Various Scenes

    Umeno, Yoshio

    Algebraic calculators are graphing calculators with a feature of computer algebra system. It can be said that we can solve mathematics only by pushing some keys of these calculators in technical colleges or universities. They also possess another feature, so we can make extensive use in engineering education. For example, we can use them for a basic education, a programming education, English education, and creative thinking tools for excellent students. In this paper, we will introduce the summary of algebraic calculators, then, consider how we utilize them in engineer education.

  16. Status of nuclear engineering education in the United States

    Brown, G.J.

    2000-01-01

    Nuclear engineering education in the United States is reflective of the perceived health of the nuclear electric power industry within the country. Just as new commercial reactor orders have vanished and some power plants have shut down, so too have university enrollments shrunk and research reactors closed. This decline in nuclear trained specialists and the disappearance of the nuclear infrastructure is a trend that must be arrested and reversed if the United States is to have a workforce capable of caring for a nuclear power industry to not only meet future electric demand but to ensure that the over 100 existing plants, their supporting facilities and their legacy in the form of high level waste and facility clean-up are addressed. Additionally, the United States has an obligation to support and maintain its nuclear navy and other defence needs. And, lastly, if the United States is to have a meaningful role in the international use of nuclear power with regard to safety, non-proliferation and the environment, then it is imperative that the country continues to produce world-class nuclear engineers and scientists by supporting nuclear engineering education at its universities. The continued support of the federal government. and industry for university nuclear engineering and nuclear energy research and development is essential to sustain the nuclear infrastructure in the United States. Even with this support, and the continued excellent operation of the existing fleet of nuclear electric power plants, it is conceivable that nuclear engineering as an academic discipline may fall victim to poor communications and a tarnished public image. What is needed is a combination of federal and industrial support along with the creativity of the universities to expand their offerings to include more than power production. The objective is a positive message on careers in nuclear related fields, and recognition of the important role of nuclear energy in meeting the country

  17. Third cycle university studies in Europe in the field of agricultural engineering and in the emerging discipline of biosystems engineering.

    Ayuga, F; Briassoulis, D; Aguado, P; Farkas, I; Griepentrog, H; Lorencowicz, E

    2010-01-01

    The main objectives of European Thematic Network entitled 'Education and Research in Agricultural for Biosystems Engineering in Europe (ERABEE-TN)' is to initiate and contribute to the structural development and the assurance of the quality assessment of the emerging discipline of Biosystems Engineering in Europe. ERABEE is co-financed by the European Community in the framework of the LLP Programme. The partnership consists of 35 participants from 27 Erasmus countries, out of which 33 are Higher Education Area Institutions (EDU) and 2 are Student Associations (ASS). 13 Erasmus participants (e.g. Thematic Networks, Professional Associations, and Institutions from Brazil, Croatia, Russia and Serbia) are also involved in the Thematic Network through synergies. To date, very few Biosystems Engineering programs exist in Europe and those that are initiated are at a very primitive stage of development. The innovative and novel goal of the Thematic Network is to promote this critical transition, which requires major restructuring in Europe, exploiting along this direction the outcomes accomplished by its predecessor; the USAEE-TN (University Studies in Agricultural Engineering in Europe). It also aims at enhancing the compatibility among the new programmes of Biosystems Engineering, aiding their recognition and accreditation at European and International level and facilitating greater mobility of skilled personnel, researchers and students. One of the technical objectives of ERABEE is dealing with mapping and promoting the third cycle studies (including European PhDs) and supporting the integration of research at the 1st and 2nd cycle regarding European Biosystems Engineering university studies. During the winter 2008 - spring 2009 period, members of ERABEE conducted a survey on the contemporary status of doctoral studies in Europe, and on a possible scheme for promotion of cooperation and synergies in the framework of the third cycle of studies and the European Doctorate

  18. Marketing within higher education institutions - A case study of two private Thai universities

    Starck, Kristian; Zadeh, Shahriyar Hossein

    2013-01-01

    Date of final seminar: 2013-05-29. Academic level: Master Thesis in Business Administration, 15 ECTS. University: Mälardalen University, Västerås, Sweden. Institution: The School of Business, Science and Engineering. Authors: Kristian Starck and Shahriyar Hossein Zadeh. Title: Marketing within higher education institutions - A case study of two private Thai universities. Supervisor: Peter Ekman. Examiner: Eva Manninen Olsson. Purpose: The purpose of this study is to describe and analyze what ...

  19. Industry-university collaboration for research and education

    Shalaby, B.A.; Snell, V.G.; Rouben, B.

    2015-01-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  20. Industry-university collaboration for research and education

    Shalaby, B.A.; Snell, V.G.; Rouben, B. [Univ. Network of Excellence in Nuclear Energy (UNENE), Ontario (Canada)

    2015-09-15

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  1. Industry-university collaboration for research and education

    Shalaby, B.A.; Snell, V.G.; Rouben, B., E-mail: basma.shalaby@rogers.com [University Network of Excellence in Nuclear Energy, Hamilton, ON (Canada)

    2015-07-01

    University Network for Excellence in Nuclear Engineering also known as UNENE is a joint partnership between the nuclear industry and thirteen universities. UNENE has been legally registered as of 2002 as a not for profit organization. The establishment of this network was prompted by industry to address anticipated retirement of a large number of professionals from industry starting in early 2000 onwards and thus the loss of nuclear knowledge and experience within industry. UNENE was created to provide a sustainable supply of highly qualified personnel to industry, support nuclear research within various universities and provide a course based Master's Degree in nuclear engineering to enhance the knowledge of young professionals within the industry in the science and technology of the CANDU nuclear power system. The paper describes the current UNENE, its research objectives, key outcomes of research programs to date and its contribution to industry needs in maintaining an economic and safe power plant performance of its nuclear fleet. The paper addresses achievements within the education program and the new 4-course diploma program recently introduced to enhance core expertise of young industry professionals. Also publications and national and international collaborations in various aspects of research have significantly contributed to Canada's position in nuclear science and research worldwide. Such collaborations are also addressed. (author)

  2. Climate Education at the University of Hamburg

    Dilly, Oliver; Stammer, Detlef; Pfeiffer, Eva-Maria

    2010-05-01

    The new graduate School of Integrated Climate Sciences (www.sicss.de) at the KlimaCampus of the University of Hamburg was opened at October 20, 2009 and includes a 2-yr MSc (120 ECTS, 30 compulsory, 90 eligible) and 3-yr doctoral program (12 ECTS). About 40 students were enrolled in early 2010. The interdisciplinary MSc program is based on a number of disciplines such as meteorology, geophysics, oceanography, geosciences and also economics and social sciences. These disciplines are required to address the faced key issues related to climate change effectively. The graduate school is guiding pupils and BSc students with competence in maths and physics on how to become a climate expert. Acquisition is done internationally at fairs, uni days and dircectly at schools and intuitions for higher education. BSc degree in the disciplines listed above is set for positive application. Climate experts are needed for both research and the professional world outside the university and research institutions. In accordance, connection within and outside the university are continuously explored and soft skills for the communication to politics and the public's are included in the MSc and PhD curricula. Since the graduate school was established within the cluster of excellence ‘Integrated Climate Analysis and Predication' (www.clisap.de), this school represents a prototype for graduate programs at the University of Hamburg. Advantages and limitations of this Climate System School concept will be discussed.

  3. Engineering education in Bangladesh - an indicator of economic development

    Chowdhury, Harun; Alam, Firoz

    2012-05-01

    Developing nations including Bangladesh are significantly lagging behind the millennium development target due to the lack of science, technology and engineering education. Bangladesh as a least developing country has only 44 engineers per million people. Its technological education and gross domestic product growth are not collinear. Although limited progress was made in humanities, basic sciences, agriculture and medical sciences, a vast gap is left in technical and engineering education. This paper describes the present condition of engineering education in the country and explores ways to improve engineering education in order to meet the national as well as global skills demand.

  4. Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university

    Azim Khairi, M.; Rahman, Mohamed Abd

    2018-01-01

    Many academic articles were published in Malaysia promoting the goodness of lean in manufacturing and industrial sectors but less attention was apparently given to the possibility of obtaining the same universal benefits when applying lean in non-manufacturing sectors especially higher education. This study aims to determine the level of lean awareness among a local university’s community taking its Faculty of Engineering (FoE) as the case study. It also seeks to identify typical FoE’s staff perception on lean regarding its benefits and the obstacles in implementing it. A web-based survey using questionnaires was carried out for 215 respondents consisting of academic and administrative staff of the faculty. Statistical Package for the Social Science (SPSS) was used to analyze the survey data collected. A total of 13.95% of respondents returned the forms. Slightly more than half of those responded (56.7%) have encountered some of the lean terms with mean 1.43 and standard deviation 0.504. However, the large amount of standard deviation somewhat indicates that the real level of lean awareness of FoE as a group was low. In terms of lean benefits, reduction of waste was favored (93.3%) by the respondents with mean 0.93 and standard deviation 0.254. For obstacles in implementing lean, lack of knowledge was selected by most respondents (86.7%) to be the major factor with mean 0.87 and standard deviation 0.346. Through the analysis done, the study may conclude that level of lean awareness among the university‘s community was low thus may hinder implementation of lean concept.

  5. Transportation Engineering Education and Outreach Program Designed for the Collegiate Level. Final Report.

    Kuhn, Beverly T.

    The Transportation Engineering Education and Outreach Program was organized to develop and disseminate educational and outreach materials that would encourage students in colleges, universities, and technical schools to select transportation as a career path and to attract more students into transportation graduate programs. The research…

  6. Information Technology in project-organized electronic and computer technology engineering education

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    1999-01-01

    This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

  7. Institutional Problems and Solutions of General Education in Chinese Universities

    Meng, Weiqing; Huang, Wei

    2018-01-01

    Embedding general education in the Chinese university education system is a considerably complex systemic project, and a lack of institutional arrangements beneficial to general education has always been a key barrier in implementation. Currently, the main institutional restricting factors for university general education include substantial…

  8. Years Universal Basic Education Programme in Public Primary

    FIRST LADY

    Indexed African Journals Online: www.ajol.info. An International ... access the impact of the implementation of the Universal Basic Education 9- ... Education in quality and content that is given in the first level of education. (Denga, 2000).

  9. Photonics education development for electrical engineering students

    Cao, Yang; Luo, Yuan; Liu, Yu; Hu, ZhangFang; Cai, Xuemei

    2017-08-01

    We describe the contents of an advanced undergraduate course on photonics at School of Electrical Engineering, Chongqing University of Posts and Telecommunications. The main goal of the course is to equip the student with the necessary theoretical and practical knowledge to participate in photonics-related industry and further graduate level study and research if they choose. The prerequisites include college-level physics and higher mathematics which a general engineering student has already had in his/her first and second year college study. Although applications of photonics are ubiquitous such as telecommunications, photonic computing, spectroscopy, military technology, and biophotonics etc. Telecommunication information system application is more emphasized in our course considering about the potential job chances for our students.

  10. Quality Assessment Survey at the School of Civil Engineering at Aalborg University

    Brohus, Henrik

    2008-01-01

    the study board of civil engineering. The questionnaire was jointly developed for all study boards at Aalborg University. The questionnaire forms an investigation of students' satisfaction and evaluation of the overall structure of the education including self-reported performance assessment. The paper......As part of an improved quality assessment procedure at the School of Civil Engineering at Aalborg University, an online survey has been undertaken among all students. Due to external requirements and a wish for more structured feedback, an online questionnaire was presented to all students under...... discusses the structure of the questionnaire and presents the results. Finally, suggestions for improvements regarding the questionnaire and further quality assessment are included. The response rate was 40%. Overall, the results showed a general satisfaction with the studies although substantial variance...

  11. Radiochemistry Education and Research Program at the Pennsylvania State University

    Uenlue, Kenan

    2009-01-01

    A new Radiochemistry Education and Research Program was started at the Pennsylvania University, Radiation Science and Engineering Center. The program was initially supported by the Department of Energy, Radiochemistry Education Award Program (REAP). Using REAP funding as leverage we obtained support from the Los Alamos National Laboratory, Department of Homeland Security, Domestic Nuclear Detection Office, various internal funding from PSU and other entities. The PSU radiochemistry program primarily addresses radiochemistry education and secondarily nuclear and radiochemistry research. The education program consists of bolstering our existing radiochemistry and related courses; Nuclear and Radiochemistry, Radiation Detection and Measurement, Radiological Safety and developing new courses, e.g., Laboratory Experiments in Applied Nuclear and Radiochemistry, and Nuclear Methods in Science. A new laboratory has been created with state of the art equipment for the Laboratory Experiments in Applied Nuclear and Radiochemistry course. We also plan to revitalize the nuclear and radiochemistry research programs. We established a state-of-the-art Neutron Activation Analysis Laboratory and a gamma ray spectroscopy laboratory that has 10 stations including state-of-the-art nuclear spectroscopy hardware and software. In addition, we embarked on an expansion plan that included building a new neutron beam hall and neutron beam ports with a cold neutron source. One of the reasons to have a cold neutron source is for the development of a prompt gamma activation analysis facility. A detailed description of PSU radiochemistry education and research program will be given and the future plans will be discussed.

  12. Annual report of Nuclear Engineering Research Laboratory, University of Tokyo in fiscal 1992

    1993-07-01

    In this annual report, the activities of education and research, the state of operation of research facilities and others in Nuclear Engineering Research Laboratory, University of Tokyo in fiscal year 1992 are summarized. In this Laboratory, there are four large research facilities, that are, the fast neutron source reactor 'Yayoi', the electron beam linac, the nuclear fusion reactor blanket experiment facility and the heavy irradiation research facility. Those are used for carrying out education and research in the wide fields of nuclear engineering, and are offered also for joint utilization. The results of research by using respective research facilities have been summarized in separate reports. The course of the management and operation of each research facility is described, and the research activities, the theses for doctorate and graduation these of teachers, personnel and graduate students in the Laboratory are summarized. (J.P.N.)

  13. Exploration of Factors Affecting Success of Undergraduate Engineering Majors at a Historically Black University

    Igbinoba, Egheosa P.

    Blacks are underrepresented amongst persons who earn college degrees in the United States and Black males attend and complete college at a lower rate than Black females (Toldson, Fry Brown, & Sutton, 2009). According to Toldson et al. (2009), this quandary may be attributed to Black males' apathy toward education in general, waning support and ideological challenges toward Pell Grants and affirmative action, cultural incompetency on the part of the 90% White, ethnic makeup of the U.S. teaching force, and the relatively high numbers of Black males who are held back in school. In spite of the dismal statistics regarding Black male academic achievement and matriculation, there are those Black males who do participate in postsecondary education. While many studies have highlighted reasons that Black males do not achieve success in attending and persisting through college, few have adopted the anti-deficit research framework suggested by Harper (2010), identifying reasons Black males do persist in higher education. Although science, technology, engineering, and mathematics careers are identified as those most imperative to the economic competitiveness of the United States, few studies have concentrated solely on engineering majors and fewer, if any, solely on Black male engineering majors at an historically Black college and university. The aim of this study was to address an apparent gap in the literature and invoke theories for recruitment, retention, and success of Black males in engineering degree programs by employing an anti-deficit achievement framework for research of students of color in science, technology, engineering, and mathematics. Data garnered from the study included insight into participants' definitions of success, precollege experiences, factors contributing to the persistence during undergraduate study, and perceptions of attending a historically Black college and university versus a primarily White institution.

  14. Training in software used by practising engineers should be included in university curricula

    Silveira, A.; Perdigones, A.; García, J. L.

    2009-04-01

    Deally, an engineering education should prepare students, i.e., emerging engineers, to use problem-solving processes that synergistically combine creativity and imagination with rigour and discipline. Recently, pressures on curricula have resulted in the development of software-specific courses, often to the detriment of the understanding of theory [1]. However, it is also true that there is a demand for information technology courses by students other than computer science majors [2]. The emphasis on training engineers may be best placed on answering the needs of industry; indeed, many proposals are now being made to try to reduce the gap between the educational and industrial communities [3]. Training in the use of certain computer programs may be one way of better preparing engineering undergraduates for eventual employment in industry. However, industry's needs in this respect must first be known. The aim of this work was to determine which computer programs are used by practising agricultural engineers with the aim of incorporating training in their use into our department's teaching curriculum. The results showed that 72% of their working hours involved the use computer programs. The software packages most commonly used were Microsoft Office (used by 79% of respondents) and CAD (56%), as well as budgeting (27%), statistical (21%), engineering (15%) and GIS (13%) programs. As a result of this survey our university department opened an additional computer suite in order to provide students practical experience in the use of Microsoft Excel, budgeting and engineering software. The results of this survey underline the importance of computer software training in this and perhaps other fields of engineering. [1] D. J. Moore, and D. R. Voltmer, "Curriculum for an engineering renaissance," IEEE Trans. Educ., vol. 46, pp. 452-455, Nov. 2003. [2] N. Kock, R. Aiken, and C. Sandas, "Using complex IT in specific domains: developing and assessing a course for nonmajors

  15. Development of security engineering curricula at US universities

    Garcia, M.L.

    1998-06-01

    The Southwest Surety Institute was formed in 1996 to create unique, science-based educational programs in security engineering. The programs will integrate business, technology, and criminal justice elements to educate a new generation of security professionals. Graduates of the programs will better understand basic security system design and evaluation and contribute to strengthening of the body of knowledge in the area of security. A systematic approach incorporating people, procedures, and equipment will be taught that will emphasize basic security principles and establish the science of security engineering. The use of performance measures in the analysis of designed systems will enable effective decisions by an enterprise and provide the rationale for investment in security systems. Along with educational programs, Institute members will conduct original research and development built on existing relationships with sponsors from government and industry in areas such as counterterroism, microelectronics, banking, aviation, and sensor development. Additional information and updates on the Southwest Surety Institute are available via the Institute home page at www.emrtc.nmt.edu/ssi.

  16. Lean engineering education driving content and competency mastery

    Flumerfelt, Shannon

    2015-01-01

    Recent studies by professional organizations devoted to engineering education, such as Vision 2030 (ASME) and Vision 2025 (ASCE), highlight the need for the restructuring of engineering education. Deficiencies of many engineering graduates include poor systems thinking and systems analysis skills, lack of sensitivity for sustainability issues, poorly developed problem solving skills and lack of training to work in (multi- disciplinary) teams, as well as a lack of leadership, entrepreneurship, innovation, and project management skills. The book's contents include an analysis of current shortfalls in engineering education and education related to professional practice in engineering. Further, the authors describe desirable improvements as well as advocacy for the use of lean tenets and tools to create a new future for engineering education. This book presents, for the first time, an outside-in lean engineering perspective of how this commonly accepted and widely practiced and adapted engineering perspecti...

  17. Infiltration of quality concepts in nuclear engineering education

    Woodall, D.M.

    1993-01-01

    The principles of total quality management (TQM) have been applied increasingly in the nuclear power industry over the last decade. The involvement of industrial professionals on the advisory boards of engineering colleges and departments has increasingly led in recent years to the recommendation that TQM be applied as appropriate to engineering education. This paper describes the concepts of TQM in their application to engineering education, specifically in the nuclear engineering area. A summary of the concerns expressed by nuclear engineering academics, as well as the record of successful implementation of TQM in the nuclear engineering education environment is provided in this paper

  18. Applicability of Online Education to Large Undergraduate Engineering Courses

    Bir, Devayan Debashis

    With the increase in undergraduate engineering enrollment, many universities have chosen to teach introductory engineering courses such as Statics of Engineering and Mechanics of Materials in large classes due to budget limitations. With the overwhelming literature against traditionally taught large classes, this study aims to see the effects of the trending online pedagogy. Online courses are the latest trend in education due to the flexibility they provide to students in terms of schedule and pace of learning with the added advantage of being less expensive for the university over a period. In this research, the effects of online lectures on engineering students' course performances and students' attitudes towards online learning were examined. Specifically, the academic performances of students enrolled in a traditionally taught, lecture format Mechanics of Materials course with the performance of students in an online Mechanics of Materials course in summer 2016 were compared. To see the effect of the two different teaching approaches across student types, students were categorized by gender, enrollment status, nationality, and by the grades students obtained for Statics, one of the prerequisite courses for Mechanics of Materials. Student attitudes towards the online course will help to keep the process of continuously improving the online course, specifically, to provide quality education through the online medium in terms of course content and delivery. The findings of the study show that the online pedagogy negatively affects student academic performance when compared to the traditional face-to-face pedagogy across all categories, except for the high scoring students. Student attitudes reveal that while they enjoyed the flexibility schedule and control over their pace of studying, they faced issues with self-regulation and face-to-face interaction.

  19. THE EDUCATION IN ENGINEERING FIELDS IN FRONT OF MARKET DEMANDS

    Kyvete Shatri

    2016-01-01

    Impacts of globalization on the engineering profession create a challenge in understanding what it means to be an engineer in the global economy of the 21st century and how should be prepared the future engineers. Engineering education today faced with request for preparation of the engineers with the necessary skills to cope with and benefit from the great changes that globalization brings. In this context, to understand how and how well we need to prepare the future engineers should be know...

  20. UCSD's Institute of Engineering in Medicine: fostering collaboration through research and education.

    Chien, Shu

    2012-07-01

    The University of California, San Diego (UCSD) was established in 1961 as a new research university that emphasizes innovation, excellence, and interdisciplinary research and education. It has a School of Medicine (SOM) and the Jacobs School of Engineering (JSOE) in close proximity, and both schools have national rankings among the top 15. In 1991, with the support of the Whitaker Foundation, the Whitaker Institute of Biomedical Engineering was formed to foster collaborations in research and education. In 2008, the university extended the collaboration further by establishing the Institute of Engineering in Medicine (IEM), with the mission of accelerating the discoveries of novel science and technology to enhance health care through teamwork between engineering and medicine, and facilitating the translation of innovative technologies for delivery to the public through clinical application and commercialization.

  1. The role of a creative "joint assignment" project in biomedical engineering bachelor degree education.

    Jiehui Jiang; Yuting Zhang; Mi Zhou; Xiaosong Zheng; Zhuangzhi Yan

    2017-07-01

    Biomedical Engineering (BME) bachelor education aims to train qualified engineers who devote themselves to addressing biological and medical problems by integrating the technological, medical and biological knowledge. Design thinking and teamwork with other disciplines are necessary for biomedical engineers. In the current biomedical engineering education system of Shanghai University (SHU), however, such design thinking and teamwork through a practical project is lacking. This paper describes a creative "joint assignment" project in Shanghai University, China, which has provided BME bachelor students a two-year practical experience to work with students from multidisciplinary departments including sociology, mechanics, computer sciences, business and art, etc. To test the feasibility of this project, a twenty-month pilot project has been carried out from May 2015 to December 2016. The results showed that this pilot project obviously enhanced competitive power of BME students in Shanghai University, both in the capabilities of design thinking and teamwork.

  2. Analysis of Engineering Content within Technology Education Programs

    Fantz, Todd D.; Katsioloudis, Petros J.

    2011-01-01

    In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

  3. Active Learning in Engineering Education: A (Re)Introduction

    Lima, Rui M.; Andersson, Pernille Hammar; Saalman, Elisabeth

    2017-01-01

    The informal network "Active Learning in Engineering Education" (ALE) has been promoting Active Learning since 2001. ALE creates opportunity for practitioners and researchers of engineering education to collaboratively learn how to foster learning of engineering students. The activities in ALE are centred on the vision that learners…

  4. The Technology of Forming of Innovative Content for Engineering Education

    Kayumova, Lilija A.; Savva, Lubov I.; Soldatchenko, Aleksandr L.; Sirazetdinov, Rustem M.; Akhmetov, Linar G.

    2016-01-01

    The relevance of the study is conditioned by the modernization of engineering education aimed at specialists' training to solve engineering and economic problems effectively. The goal of the paper is to develop the technology of the innovative content's formation for engineering education. The leading method to the study of this problem is a…

  5. About, for, in or through Entrepreneurship in Engineering Education

    Mäkimurto-Koivumaa, Soili; Belt, Pekka

    2016-01-01

    Engineering competences form a potential basis for entrepreneurship. There are pressures to find new approaches to entrepreneurship education (EE) in engineering education, as the traditional analytical logic of engineering does not match the modern view of entrepreneurship. Since the previous models do not give tangible enough tools on how to…

  6. Advanced Engineering Methods in Design and Education

    Kamenov, Krasimir; Dobreva, Antoaneta; Ronkova, Vyarka

    2017-10-01

    The paper presented deals with the challenges occurring during the education of the new digital generation of students in the area of engineering subjects. This new situation in teaching technologies imposes the obtaining of appropriate feedback from the students during the lectures and tutorials. The objective of the research is to investigate the impact of the application of video games, graphical presentations, animations, etc. The feedback received in such interactive way gives the opportunity to improve the teaching models and to increase the active participation of the students during the lectures and tutorials.

  7. Hybrid rocket engine research program at Ryerson University

    Karpynczyk, J.; Greatrix, D.R. [Ryerson Polytechnic Univ., Toronto, ON (Canada). Dept. of Aerospace Engineering

    2007-07-01

    Hybrid rocket engines (HREs) are a combination of solid and liquid propellant rocket engine designs. A solid fuel grain is located in the main combustion chamber and nozzle aft, while a stored liquid or gaseous oxidizer source supplies the required oxygen content through a throttle valve, for combustion downstream in the main chamber. HREs have drawn significant interest in certain flight applications, as they can be advantageous in terms of cost, ease and safety in storage, controllability in flight, and availability of propellant constituents. Key factors that will lead to further practical usage of HREs for flight applications are their predictability and reproducibility of operational performance. This paper presented information on studies being conducted at Ryerson University aimed at analyzing and testing the performance of HREs. It discussed and illustrated the conventional HRE and analyzed engine performance considerations such as the fuel regression rate, mass flux about the fuel surface, burning rate, and zero transformation parameter. Other factors relating to HRE performance that were presented included induced forward and aft oxidizer flow swirl effects as a means for augmenting the fuel regression rate, stoichiometric grain length issues, and feed system stability. Last, the paper presented a simplified schematic diagram of a proposed thrust/test stand for HRE test firings. 2 refs., 3 figs.

  8. Analysis of Search Engines and Meta Search Engines\\\\\\' Position by University of Isfahan Users Based on Rogers\\\\\\' Diffusion of Innovation Theory

    Maryam Akbari

    2012-10-01

    Full Text Available The present study investigated the analysis of search engines and meta search engines adoption process by University of Isfahan users during 2009-2010 based on the Rogers' diffusion of innovation theory. The main aim of the research was to study the rate of adoption and recognizing the potentials and effective tools in search engines and meta search engines adoption among University of Isfahan users. The research method was descriptive survey study. The cases of the study were all of the post graduate students of the University of Isfahan. 351 students were selected as the sample and categorized by a stratified random sampling method. Questionnaire was used for collecting data. The collected data was analyzed using SPSS 16 in both descriptive and analytic statistic. For descriptive statistic frequency, percentage and mean were used, while for analytic statistic t-test and Kruskal-Wallis non parametric test (H-test were used. The finding of t-test and Kruscal-Wallis indicated that the mean of search engines and meta search engines adoption did not show statistical differences gender, level of education and the faculty. Special search engines adoption process was different in terms of gender but not in terms of the level of education and the faculty. Other results of the research indicated that among general search engines, Google had the most adoption rate. In addition, among the special search engines, Google Scholar and among the meta search engines Mamma had the most adopting rate. Findings also showed that friends played an important role on how students adopted general search engines while professors had important role on how students adopted special search engines and meta search engines. Moreover, results showed that the place where students got the most acquaintance with search engines and meta search engines was in the university. The finding showed that the curve of adoption rate was not normal and it was not also in S-shape. Morover

  9. Research Reactor Utilization at the University of Utah for Nuclear Education, Training and Services

    Jevremovic, T.; Choe, D.O.

    2013-01-01

    In the years of nuclear renaissance we all recognize a need for modernizing the approaches in fostering nuclear engineering and science knowledge, in strengthening disciplinary depth in students’ education for their preparation for workforce, and in helping them learn how to extend range of skills, develop habits of mind and subject matter knowledge. The education infrastructure at the University of Utah has been recently revised to incorporate the experiential learning using our research reactor as integral part of curriculum, helping therefore that all of our students build sufficient level of nuclear engineering literacy in order to be able to contribute productively to nuclear engineering work force or continue their education toward doctoral degrees. The University of Utah TRIGA Reactor built 35 years ago represents a university wide facility to promote research, education and training, as well as is used for various applications of nuclear engineering, radiation science and health physics. Our curriculum includes two consecutive classes for preparation of our students for research reactor operating license. Every year the US Nuclear Regulatory Commission’s representatives hold the final exam for our students. Our activities serve the academic community of the University of Utah, commercial and government entities, other universities and national laboratories as well. (author)

  10. African American Adolescent Female Identification with Engineering and Participation in Engineering Education

    Cornick, Shayla L.

    2012-01-01

    Experiences that females have during middle and high school have been found to influence the perceptions that they have of their ability to be successful as an engineer and the value that they place on participating in engineering education. Engineering education continues to suffer from a lack of female participation. Several efforts have been…

  11. Russian geological education in the world market (the case of Russian State Geological Prospecting University

    Vasily Ivanovich Lisov

    2016-12-01

    Full Text Available Higher geological education in Russia and in MSGPI-RSGPU specific. It - engineering. The mineral deposits determine the development of the global industry and foreign trade. Growing global demand for the profession of geologists and mining engineers. Training of foreign students in Russia has its own geopolitical and economic importance. In Russia a strong resource-based economy. It attracts students from developing countries. MGRI-RSGPU is the leading universities training specialists for mining. The article presents data about the University and types of education. Shown scientific and educational problems in higher education. This article discusses the prospects for the promotion of Russian higher geological education at the world market of educational services. The increasing role of new scientific and technological achievements in mining, enhanced environmental as well as staff requirements is revealed. Given that the leading schools in the mining industry, in addition to Russia, are formed in Canada, Germany, USA, Australia, Great Britain, many developing countries rich in natural resources, have begun to form their own national centers for training in this area. Under such competitive conditions Russian geological education maintains its own niche. Recognition of this is the active participation of Russian universities in the creation and development of the World Forum of sustainable development of mineral universities (WFURS, described in the article. The main factors of competitiveness that led to leading positions of Russian State Geological Prospecting University in system of the Russian geological education are described. Particular attention is paid to the international activities of Russian higher educational institutions including Geological Prospecting University. The basic statistics (both in the context of the country, and in the field of foreign undergraduate and graduate students enrolled at this university is provided. The

  12. A Review of Research on Universal Design Educational Models

    Rao, Kavita; Ok, Min Wook; Bryant, Brian R.

    2014-01-01

    Universal design for learning (UDL) has gained considerable attention in the field of special education, acclaimed for its promise to promote inclusion by supporting access to the general curriculum. In addition to UDL, there are two other universal design (UD) educational models referenced in the literature, universal design of instruction (UDI)…

  13. Systems approach to managing educational quality in the engineering classroom

    Grygoryev, Kostyantyn

    Today's competitive environment in post-secondary education requires universities to demonstrate the quality of their programs in order to attract financing, and student and academic talent. Despite significant efforts devoted to improving the quality of higher education, systematic, continuous performance measurement and management still have not reached the level where educational outputs and outcomes are actually produced---the classroom. An engineering classroom is a complex environment in which educational inputs are transformed by educational processes into educational outputs and outcomes. By treating a classroom as a system, one can apply tools such as Structural Equation Modeling, Statistical Process Control, and System Dynamics in order to discover cause-and-effect relationships among the classroom variables, control the classroom processes, and evaluate the effect of changes to the course organization, content, and delivery, on educational processes and outcomes. Quality improvement is best achieved through the continuous, systematic application of efforts and resources. Improving classroom processes and outcomes is an iterative process that starts with identifying opportunities for improvement, designing the action plan, implementing the changes, and evaluating their effects. Once the desired objectives are achieved, the quality improvement cycle may start again. The goal of this research was to improve the educational processes and outcomes in an undergraduate engineering management course taught at the University of Alberta. The author was involved with the course, first, as a teaching assistant, and, then, as a primary instructor. The data collected from the course over four years were used to create, first, a static and, then, a dynamic model of a classroom system. By using model output and qualitative feedback from students, changes to the course organization and content were introduced. These changes led to a lower perceived course workload and

  14. Graduate nuclear engineering programmes motivate educational and research activities

    Mavko, B.

    2000-01-01

    Some fifteen years ago the University of Ljubljana, Faculty for Mathematics and Physics together with the national research organisation the J. Stefan jointly established a Graduate programme of Nuclear Engineering. From the onset, the programme focused on nuclear technology, nuclear safety, and reactor physics and environment protection. Over the years this graduate programme has became the focal point of nuclear related, research and educational activities in Slovenia. It has grown into a meeting ground for recognised national and distinguished foreign educators and experienced professionals from the industry. In conjunction with an important national project, supported by the Slovenian government, entitled 'Jung Researcher' it also enhances the knowledge transfer to the next generation. Since the programme was introduced, the interest for this programme has been steadily growing. Accordingly, a number of PhD and MS degrees in NE have been awarded. The graduates of this programme have encountered very good job opportunities in nuclear as well as in non-nuclear sector. (author)

  15. Game play in vocational training and engineering education

    Bjarne A. Foss

    2007-04-01

    Full Text Available Educational games may create a new and improved learning culture by drawing advantage of the new knowledge and skills of today’s students obtained from extensive use of interactive game software. This paper presents a design basis and online learning resources taking advantage of game-related features like a high degree of interactivity, attractive graphics, a dynamical virtual universe, and an incentive system to promote prolonged and more advanced use. The educational resources, denoted PIDstop, are targeted towards the engineering domain. Feedback from over 2000 users clearly indicates that PIDstop has a positive learning effect. Training packages for vocational training of Automation Technicians is emphasized in this paper. Such learning resources must have a limited mathematical complexity; hence, the representation should be rather descriptive. Evaluation of learning resources to assess the actual learning effect is important, and a two-step procedure based on formative and summative evaluation is proposed for this purpose.

  16. Against Educational Technology in the Neoliberal University

    Richard Hall

    2015-03-01

    Full Text Available In the Grundrisse, Marx argued that the circulation of productive capital was “a process of transformation, a qualitative process of value”. As capitalists sought to overcome the barriers to this transformatory process, they worked to revolutionise both the means of production via organisational and technological change, and circulation time via transportation and communication changes. Reducing friction in the production and circulation of capital is critical to the extraction of surplus value, and Marx argued that in this transformation “Capital by its nature drives beyond every spatial barrier [and]… the annihilation of space by time - becomes an extraordinary necessity for it.” Higher education is increasingly a space which is being recalibrated so as to increase the mobility or fluidity of intellectual production and circulation. Thus, technology, technical services and techniques are deployed to collapse the interfaces between space and time, and to subsume academic labour inside processes for valorisation. However, this collapse also reveals the stresses and strains of antagonisms, as the friction of neoliberal higher education reform deforms existing cultures and histories. Through such a deformation, it also reminds us of alternative historical and material re-imaginings and alternatives like the Chilean CyberSyn project, the Ecuadorian National Plan for Good Living, the Hornsey Experiment, and so on. This presentation argues that inside the University, the deployment of technologies, technical services and techniques enables education and academic labour to be co-opted for value-production. As a result, academics and students are defined as entrepreneurial subjects with limited power-to produce a world beyond value. A question is the extent to which pedagogical and transitional alternatives might be described, and whether in the process it is possible to uncover ways in which education might be used for co-operation rather

  17. Interactive Virtual Reactor and Control Room for Education and Training at Universities and Nuclear Power Plants

    Satoh, Yoshinori; Li, Ye; Zhu, Xuefeng; Rizwan, Uddin

    2014-01-01

    Efficient and effective education and training of nuclear engineering students and nuclear workers are critical for the safe operation and maintenance of nuclear power plants. With an eye toward this need, we have focused on the development of 3D models of virtual labs for education, training as well as to conduct virtual experiments. These virtual labs, that are expected to supplement currently available resources, and have the potential to reduce the cost of education and training, are most easily developed on game-engine platforms. We report some recent extensions to the virtual model of the University of Illinois TRIGA reactor

  18. Interactive Virtual Reactor and Control Room for Education and Training at Universities and Nuclear Power Plants

    Satoh, Yoshinori; Li, Ye; Zhu, Xuefeng; Rizwan, Uddin [University of Illinois, Urbana (United States)

    2014-08-15

    Efficient and effective education and training of nuclear engineering students and nuclear workers are critical for the safe operation and maintenance of nuclear power plants. With an eye toward this need, we have focused on the development of 3D models of virtual labs for education, training as well as to conduct virtual experiments. These virtual labs, that are expected to supplement currently available resources, and have the potential to reduce the cost of education and training, are most easily developed on game-engine platforms. We report some recent extensions to the virtual model of the University of Illinois TRIGA reactor.

  19. Would Increasing Engineering Literacies Enable Untapped Opportunities for STEM Education?

    Redman, Christine

    2017-01-01

    The main focus here is to examine the benefits of defining and developing an engineering curriculum for elementary schools. Like many other international educational systems, Australian educational settings have been seeking to effectively implement science, technology, engineering, and mathematics (STEM) education. However, current assumptions…

  20. Two Models of Engineering Education for the Professional Practice

    Ir. Dick van Schenk Brill; Ir Peter Boots; Ir. Peter van Kollenburg

    2002-01-01

    Two models for engineering education that may answer the needs for "Renaissance Engineers" are described in this paper. They were the outcome of an educational renewal project, funded by the Dutch Ministry of Education and industrial companies. The first model (Corporate Curriculum) aims to bring

  1. Business Education at Catholic Universities: Current Status and Future Directions

    Porth, Stephen J.; McCall, John J.; DiAngelo, Joseph A.

    2009-01-01

    Is business education at Catholic colleges and universities different than business education at secular institutions? This study assesses the current state of business education at Catholic colleges and universities based on a national survey of business school deans and faculty members and an audit of business unit web sites. Results suggest…

  2. University Teacher Educators' Research Engagement: Perspectives from Saudi Arabia

    Borg, Simon; Alshumaimeri, Yousif

    2012-01-01

    This paper examines university teacher educators' engagement with and in educational research. Survey results collected from eighty-two teacher educators at a leading university in Saudi Arabia pointed to modest levels of research activity and also suggested that these individuals held largely technical views of what research is. Their assessments…

  3. Social Network Theory in Engineering Education

    Simon, Peter A.

    Collaborative groups are important both in the learning environment of engineering education and, in the real world, the business of engineering design. Selecting appropriate individuals to form an effective group and monitoring a group's progress are important aspects of successful task performance. This exploratory study looked at using the concepts of cognitive social structures, structural balance, and centrality from social network analysis as well as the measures of emotional intelligence. The concepts were used to analyze potential team members to examine if an individual's ability to perceive emotion in others and the self and to use, understand, and manage those emotions are a factor in a group's performance. The students from a capstone design course in computer engineering were used as volunteer subjects. They were formed into groups and assigned a design exercise to determine whether and which of the above-mentioned tools would be effective in both selecting teams and predicting the quality of the resultant design. The results were inconclusive with the exception of an individual's ability to accurately perceive emotions. The instruments that were successful were the Self-Monitoring scale and the accuracy scores derived from cognitive social structures and Level IV of network levels of analysis.

  4. The Rise of Student-to-Student Learning: Youth-led Programs Impacting Engineering Education Globally

    Julian O'Shea

    2011-07-01

    Full Text Available Around the globe, students and young engineers are playing an increasing role in the coordination and delivery of engineering education programs. Many youth-led initiatives are now conducted with students involved in all aspects of their creation, organisation and delivery. This trend presents an exciting opportunity for the education of engineering students, both those involved in delivery of the courses and for participants. This paper profiles four leading youth-led engineering education programs and analyses their structure and growth in recent years. Profiled are initiatives coordinated by Engineers Without Borders – Australia (EWB-A; the Board of European Students of Technology (BEST; the Electrical Engineering Students’ European Association (EESTEC; and the Student Platform for Engineering Education Development (SPEED. Each case study includes a brief history of the organisation, program overview, growth analysis and future projections. The common features amongst these programs were analysed, as were the aspects which made them distinct from traditional university offerings. Key findings about the initiatives include: an international focus; the mixture of formal learning and social aspects; an integral role of volunteers within the organisation; the use of residential programs; and the role of internal professional development of committee members and volunteers. Additionally, this paper outlines the benefits for universities and provides a guide for how engineering faculties can support and nurture these initiatives and effectively create partnerships.

  5. Virtual Chemical Engineering: Guidelines for E-Learning in Engineering Education

    Damian Schofield

    2010-11-01

    Full Text Available Advanced three-dimensional virtual environment technology, similar to that used by the film and computer games industry can allow educational developers to rapidly create realistic three-dimensional, virtual environments. This technology has been used to generate a range of interactive learning environments across a broad spectrum of industries.The paper will discuss the implementation of these systems and extrapolate the lessons learnt into general guidelines to be considered for the development of a range of educational learning resources. These guidelines will then be discussed in the context of the development of ViRILE (Virtual Reality Interactive Learning Environment, software which simulates the configuration and operation of a polymerisation plant. This software package has been developed for use by undergraduate chemical engineers at the University of Nottingham.

  6. Universal Design in the Technology Education Curriculum: Experiences from Norway

    Sandnes, Frode Eika; Eika, Evelyn

    2017-01-01

    In recent decades the engineering and technology education curriculum has changed from being purely technical oriented towards being more socially aware. In addition, to adequately master technologies and subsequent technical problem solving, engineers need to be alert to potential social impacts of their work and reflect upon their decisions accordingly . Most engineering studies have included elements...

  7. Trends in aeropropulsion research and their impact on engineering education

    Povinelli, Louis A.; Reichert, Bruce A.; Glassman, Arthur J.

    1992-01-01

    This presentation is concerned with the trends in aeropropulsion both in the U.S. and abroad and the impact of these trends on the educational process in our universities. In this paper, we shall outline the new directions for research which may be of interest to educators in the aeropropulsion field. Awareness of new emphases, such as emission reductions, noise control, maneuverability, speed, etc., will have a great impact on engineering educators responsible for restructuring courses in propulsion. The information presented herein will also provide some background material for possible consideration in the future development of propulsion courses. In describing aeropropulsion, we are concerned primarily with air-breathing propulsion; however many observations apply equally as well to rocket engine systems. Aeropropulsion research needs are primarily motivated by technologies required for advanced vehicle systems and frequently driven by external requirements such as economic competitiveness, environmental concern and national security. In this presentation, vehicle based research is first described, followed by a discussion of discipline and multidiscipline research necessary to implement the vehicle-focused programs. The importance of collaboration in research and the training of future researchers concludes this presentation.

  8. Unique educational opportunities at the Missouri University research reactor

    Ketring, A.R.; Ross, F.K.; Spate, V.

    1997-01-01

    Since the Missouri University Research Reactor (MURR) went critical in 1966, it has been a center where students from many departments conduct their graduate research. In the past three decades, hundreds of graduate students from the MU departments of chemistry, physics, anthropology, nuclear engineering, etc., have received masters and doctoral degrees based on research using neutrons produced at MURR. More recently, the educational opportunities at MURR have been expanded to include undergraduate students and local high school students. Since 1989 MURR has participated in the National Science Foundation-funded Research Experience for Undergraduates (REU) program. As part of this program, undergraduate students from universities and colleges throughout the United States come to MURR and get hands-on research experience during the summer. Another program, started in 1994 by the Nuclear Analysis Program at MURR, allows students from a local high school to conduct a neutron activation analysis (NAA) experiment. We also conduct tours of the center, where we describe the research and educational programs at MURR to groups of elementary school children, high school science teachers, state legislators, professional organizations, and many other groups

  9. Researching primary engineering education: UK perspectives, an exploratory study

    Clark, Robin; Andrews, Jane

    2010-10-01

    This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

  10. The Transformation of Traditional Universities into Entrepreneurial Universities to Ensure Sustainable Higher Education

    Bikse, Veronika; Lusena-Ezera, Inese; Rivza, Baiba; Volkova, Tatjana

    2016-01-01

    This paper aims to investigate the experience and to identify the drivers of transforming traditional universities into Entrepreneurial Universities for ensuring sustainable higher education in Latvia. Due to the wide scope, Entrepreneurial University characteristics, the present research study is limited and focuses on the university providing…

  11. Brief Discussions of a Draw of American Universal Education on Chinese Postgraduate Teaching Methods

    Li Zhengminqing

    2015-01-01

    Full Text Available Initiated by International Friendships Inc.(IFI in Cincinnati, that is a Christian community organization, the authors participated in a universal education activity, called “History Museum”, organized by the local people in Kentucky State of U.S.A. In the activity, the authors grasped some characteristics of American universal education and reflected some problems of the professional foundation teaching of Chinese postgraduates, especially of Chinese engineering postgraduates. Based on the above thinking, some suggestions of the teaching methods for the professional foundation courses of Chinese postgraduates are proposed. Furthermore, the authors hope the proposed methods would be good for improving the postgraduate education in China.

  12. Ethical Risk Management Education in Engineering: A Systematic Review.

    Guntzburger, Yoann; Pauchant, Thierry C; Tanguy, Philippe A

    2017-04-01

    Risk management is certainly one of the most important professional responsibilities of an engineer. As such, this activity needs to be combined with complex ethical reflections, and this requirement should therefore be explicitly integrated in engineering education. In this article, we analyse how this nexus between ethics and risk management is expressed in the engineering education research literature. It was done by reviewing 135 articles published between 1980 and March 1, 2016. These articles have been selected from 21 major journals that specialize in engineering education, engineering ethics and ethics education. Our review suggests that risk management is mostly used as an anecdote or an example when addressing ethics issues in engineering education. Further, it is perceived as an ethical duty or requirement, achieved through rational and technical methods. However, a small number of publications do offer some critical analyses of ethics education in engineering and their implications for ethical risk and safety management. Therefore, we argue in this article that the link between risk management and ethics should be further developed in engineering education in order to promote the progressive change toward more socially and environmentally responsible engineering practices. Several research trends and issues are also identified and discussed in order to support the engineering education community in this project.

  13. First-year Engineering Education with the Creative Electrical Engineering Laboratory

    Tsukamoto, Takehiko; Sugito, Tetsumasa; Ozeki, Osamu; Ushiroda, Sumio

    The Department of Electrical and Electronic Engineering in Toyota National College of Technology has put great emphasis on fundamental subjects. We introduced the creative electrical engineering laboratory into the first-year engineering education since 1998. The laboratory concentrates on the practice exercise. The final questionnaire of students showed that our first-year education is very effective to promote students motivation and their scholastic ability in engineering.

  14. Experience in the Education of Engineers from Vietnam in the Faculty of Mining and Geoengineering AGH

    Cała, Marek; Borowski, Marek

    2018-03-01

    The AGH University of Science and Technology collaborates closely with other universities, economic units, governmental and local administrative bodies. International cooperation plays a very important role in the academic research. The AGH University of Science and Technology has signed many collaboration agreements. They aim at multidimensional cooperation in the fields of education and academic research. AGH UST has always focused on collaboration with business and industry. In recent years, the global economy is undergoing massive transformations, what creates new challenges to companies and educational institutions that cater to the needs of industry. The expansion of business enterprises is largely dependent on their employees' expertise, skills and levels of competence. Certified engineers are provided by universities. Therefore, the qualifications of the graduates are determined by the curriculum and teaching methods, as well as the available educational and research facilities. Of equal importance is the qualified academic staff. Human activities in the field of engineering require finding solutions to problems of various nature and magnitude. An engineer's work consists in the design, construction, modification and maintenance of useful devices, processes and systems, using scientific and technical knowledge. In order to design complex engineering solutions, an engineer uses his imagination, experience, analytical skills, logical reasoning and makes conscious use of his knowledge. At the Faculty of Mining and Geoengineering of the AGH University of Science and Technology in Cracow, 15 engineers from Vietnam are studying Mining and Geology at the second-cycle studies (specialization: mine ventilation). The solutions proposed in the field of the engineers' education guarantee that foreign students gain both engineering knowledge and problem-solving skills. Therefore, the study programme was complemented by a series of practical aspects.

  15. Analysis of nuclear and radiological events. Textbook for lecture in graduate school of engineering in the University of Tokyo

    Watanabe, Norio

    2007-02-01

    The Japan Atomic Energy Agency is carrying out the cooperative activity by providing specialized educational and training staff and making our facilities available for the graduate school of engineering in The University of Tokyo as part of developing human resources in nuclear technology. This report is prepared as a textbook for the lecture in the graduate school of engineering in The University of Tokyo and provides the outlines of activities on the analysis of nuclear and radiological events and analysis methods as well as the summaries of major incidents and accidents that occurred. (author)

  16. First Year Experiences in School of Mechanical Engineering Kanazawa University

    Kinari, Toshiyasu; Kanjin, Yuichi; Furuhata, Toru; Tada, Yukio

    This paper reports two lectures of the first year experience, ‧Lecture on Life in Campus and Society‧ and ‧Freshman Seminar‧ and discusses their effects. Both lectures have been given freshmen of the school of mechanical engineering, Kanazawa University in H20 spring term. The former lecture is aimed at freshmen to keep on a proper way in both social and college life. It consists of normal class and e-learning system lectures. E-learning system examination requires students to review the whole text book and that seems to have brought better results in the survey. The latter seminar is aimed at freshmen to get active and self-disciplined learning way through their investigation, discussion, presentation, writing work, and so on.

  17. EXPERIENCE NETWORKING UNIVERSITY OF EDUCATION TRAINING MASTERS SAFETY OF LIFE

    Elvira Mikhailovna Rebko

    2016-01-01

    The article discloses experience networking of universities (Herzen State Pedagogical University and Sakhalin State University) in the development and implementation of joint training programs for master’s education in the field of life safety «Social security in the urban environment». The novelty of the work is to create a schematic design of basic educational training program for master’s education in the mode of networking, and to identify effective instructional techniques and conditions...

  18. Post University On-the-Job Training for Engineers

    Manganiello, Eugene J.; Hlavin, Vincent F.

    1961-01-01

    Our national need for qualified scientists and engineers is greater now than at any other time in our history. Fortunately, we can point with pride to this need as a measure of the impact of science and technology on our way of life. In effect, we have made such rapid strides In advancing established sciences and in opening new technological fields that we have proved the value of the scientist and engineer to society, and, as a-result, have created an expanding demand for their services which we must now attempt to satisfy. This demand we face is also due to the changing skills and high degree of specialization required to perform in these new technological fields. The colleges and universities are doing their part to provide current graduates with a modern technical foundation, but we cannot afford to ignore the thousands of experienced engineers and scientists already employed by private industry and government. As employers, we have an obligation to these men and women to see that they are provided with an understanding of the latest advances that modern technology has to offer; that we develop them in particular specialty areas characteristic of a given field of work; and, equally important, that we assist them in the transition from one field to another as the technological emphasis shifts. Practically all technological industries have experienced and continue to experience rapid changes in their activities. The aerospace business, in particular, has been characterized by extremely rapid, in fact revolutionary, changes during the relatively short period of its existence0 At the National Aeronautics and Space Administration, successor to the National Advisory Committee for Aeronautics, for example, we have encountered the fun impact of a changing science and technology. Indeed, as a research organization, we have undoubtedly contributed, in some measure, to this change. Within the NASAs Lewis Research Center, we have approximately 800 research scientists and

  19. Engineering Knowledge and Student Development: An Institutional and Pedagogical Critique of Engineering Education

    Tang, Xiaofeng

    Educators have recommended the integration of engineering and the liberal arts as a promising educational model to prepare young engineers for global economic, environmental, sociotechnical, and ethical challenges. Drawing upon philosophy of technology, engineering studies, and educational psychology, this dissertation examines diverse visions and strategies for integrating engineering and liberal education and explores their impacts on students' intellectual and moral development. Based on archival research, interviews, and participant observation, the dissertation presents in-depth case studies of three educational initiatives that seek to blend engineering with the humanities, social sciences, and arts: Harvey Mudd College, the Picker Engineering Program at Smith College, and the Programs in Design and Innovation at Rensselaer Polytechnic Institute. The research finds that learning engineering in a liberal arts context increases students' sense of "owning" their education and contributes to their communication, teamwork, and other non-technical professional skills. In addition, opportunities for extensive liberal arts learning in the three cases encourage some students to pursue alternative, less technocentric approaches to engineering. Nevertheless, the case studies suggest that the epistemological differences between the engineering and liberal arts instructors help maintain a technical/social dualism among most students. Furthermore, the dissertation argues a "hidden curriculum," which reinforces the dominant ideology in the engineering profession, persists in the integrated programs and prevents the students from reflecting on the broad social context of engineering and critically examining the assumptions upheld in the engineering profession.

  20. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    Hamid, Nasri A.; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri

    2015-04-01

    Developing human capital in nuclear with required nuclear background and professional qualifications is necessary to support the implementation of nuclear power projects in the near future. Sufficient educational and training skills are required to ensure that the human resources needed by the nuclear power industry meets its high standard. The Government of Malaysia has made the decision to include nuclear as one of the electricity generation option for the country, post 2020 in order to cater for the increasing energy demands of the country as well as to reduce CO2 emission. The commitment by the government has been made clearer with the inclusion of the development of first NPP by 2021 in the Economic Transformation Program (ETP) which was launched by the government in October 2010. The In tandem with the government initiative to promote nuclear energy, Center for Nuclear Energy, College of Engineering, Universiti Tenaga Nasional (UNITEN) is taking the responsibility in developing human capital in the area of nuclear power and technology. In the beginning, the College of Engineering has offered the Introduction to Nuclear Technology course as a technical elective course for all undergraduate engineering students. Gradually, other nuclear technical elective courses are offered such as Nuclear Policy, Security and Safeguards, Introduction to Nuclear Engineering, Radiation Detection and Nuclear Instrumentation, Introduction to Reactor Physics, Radiation Safety and Waste Management, and Nuclear Thermal-hydraulics. In addition, another course Advancement in Nuclear Energy is offered as one of the postgraduate elective courses. To enhance the capability of teaching staffs in nuclear areas at UNITEN, several junior lecturers are sent to pursue their postgraduate studies in the Republic of Korea, United States and the United Kingdom, while the others are participating in short courses and workshops in nuclear that are conducted locally and abroad. This paper describes

  1. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    Hamid, Nasri A.; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri

    2015-01-01

    Developing human capital in nuclear with required nuclear background and professional qualifications is necessary to support the implementation of nuclear power projects in the near future. Sufficient educational and training skills are required to ensure that the human resources needed by the nuclear power industry meets its high standard. The Government of Malaysia has made the decision to include nuclear as one of the electricity generation option for the country, post 2020 in order to cater for the increasing energy demands of the country as well as to reduce CO 2 emission. The commitment by the government has been made clearer with the inclusion of the development of first NPP by 2021 in the Economic Transformation Program (ETP) which was launched by the government in October 2010. The In tandem with the government initiative to promote nuclear energy, Center for Nuclear Energy, College of Engineering, Universiti Tenaga Nasional (UNITEN) is taking the responsibility in developing human capital in the area of nuclear power and technology. In the beginning, the College of Engineering has offered the Introduction to Nuclear Technology course as a technical elective course for all undergraduate engineering students. Gradually, other nuclear technical elective courses are offered such as Nuclear Policy, Security and Safeguards, Introduction to Nuclear Engineering, Radiation Detection and Nuclear Instrumentation, Introduction to Reactor Physics, Radiation Safety and Waste Management, and Nuclear Thermal-hydraulics. In addition, another course Advancement in Nuclear Energy is offered as one of the postgraduate elective courses. To enhance the capability of teaching staffs in nuclear areas at UNITEN, several junior lecturers are sent to pursue their postgraduate studies in the Republic of Korea, United States and the United Kingdom, while the others are participating in short courses and workshops in nuclear that are conducted locally and abroad. This paper describes

  2. Progress of teaching and learning of nuclear engineering courses at College of Engineering, Universiti Tenaga Nasional (UNITEN)

    Hamid, Nasri A., E-mail: Nasri@uniten.edu.my; Mohamed, Abdul Aziz; Yusoff, Mohd. Zamri [Nuclear Energy Center, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia)

    2015-04-29

    Developing human capital in nuclear with required nuclear background and professional qualifications is necessary to support the implementation of nuclear power projects in the near future. Sufficient educational and training skills are required to ensure that the human resources needed by the nuclear power industry meets its high standard. The Government of Malaysia has made the decision to include nuclear as one of the electricity generation option for the country, post 2020 in order to cater for the increasing energy demands of the country as well as to reduce CO{sub 2} emission. The commitment by the government has been made clearer with the inclusion of the development of first NPP by 2021 in the Economic Transformation Program (ETP) which was launched by the government in October 2010. The In tandem with the government initiative to promote nuclear energy, Center for Nuclear Energy, College of Engineering, Universiti Tenaga Nasional (UNITEN) is taking the responsibility in developing human capital in the area of nuclear power and technology. In the beginning, the College of Engineering has offered the Introduction to Nuclear Technology course as a technical elective course for all undergraduate engineering students. Gradually, other nuclear technical elective courses are offered such as Nuclear Policy, Security and Safeguards, Introduction to Nuclear Engineering, Radiation Detection and Nuclear Instrumentation, Introduction to Reactor Physics, Radiation Safety and Waste Management, and Nuclear Thermal-hydraulics. In addition, another course Advancement in Nuclear Energy is offered as one of the postgraduate elective courses. To enhance the capability of teaching staffs in nuclear areas at UNITEN, several junior lecturers are sent to pursue their postgraduate studies in the Republic of Korea, United States and the United Kingdom, while the others are participating in short courses and workshops in nuclear that are conducted locally and abroad. This paper

  3. THE RESEARCH PROJECTS THROUGH UNIVERSITY-BUSINESS RELATIONSHIP IN THE CONTINUOUS FORMATION OF CHEMICAL ENGINEERS

    Diana Niurka Concepción Toledo

    2015-07-01

    Full Text Available Economic and social development requires the establishment of strategic alliances of society to higher education. The university, based on the benefits of deep multiplier effect, has the ability and the duty to manage knowledge and transferring scientific results obtained in its substantive processes: teaching, scientific research and university extension to the productive context. In this paper the experience developed by Chemical Engineering Department of Central University “Marta Abreu” of Las Villas in which the scientific community in the industry of sugar cane is prepared to manage knowledge through university- business relationship is exposed. For this effort, an innovative process focused on the execution of research projects from scientific and technological demands set by the sugar factory "Antonio Sanchez" Aguada de Pasajeros develops. In the development of the planned actions it will be attended teacher-researchers, specialists and managers of the company and the incorporation of students in the race for the exercise of labor practice, innovative aspect of its formation, which consolidates professional preparation. The experience showed the potential offered by the connection of university science with industry through the establishment of innovative processes in knowledge management to ensure greater relevance of university substantive processes and the immediate incorporation of scientific results to the productive sector as the supreme goal of this activity.

  4. Challenges of Universal Basic Education Programme: The Role of ...

    Toshiba

    Counsellors roles for effective implementation of Universal Basic. Education. Recommendations ... In the Nigerian context, basic education includes primary, junior. Secondary and .... Infrastructural facilities, especially in rural areas. 3.75. 8th. 9.

  5. Telematics supported education for traditional universities in Europe.

    Collis, Betty

    1999-01-01

    Telematics is the combination of information technology and communication technology. Telematics applications to support educational delivery and participation in traditional European universities are rapidly becoming part of the educational setting. Sometimes they are used specifically to increase

  6. Development of Engineering Design Education in the Department of Mechanical Engineering at Kanazawa Technical College

    Yamada, Hirofumi; Ten-Nichi, Michio; Mathui, Hirosi; Nakamura, Akizi

    This paper introduces a method of the engineering design education for college of technology mechanical engineering students. In order to teach the practical engineering design, the MIL-STD-499A process is adapted and improved upon for a Mechatronics hands-on lesson used as the MOT method. The educational results in five years indicate that knowledge of the engineering management is useful for college students in learning engineering design. Portfolio for lessons and the hypothesis method also have better effects on the understanding of the engineering specialty.

  7. Gender in Engineering Studies at Brazilian Technical University

    de Lima Sobreira, Josimeire

    2008-10-01

    Full Text Available The research on a Technological University of Brazil, among students in Engineering, revealed that women occupy no more than 12 % (in general of the places at the Institution. The university study that the girls most prefer is the Engineering of Buildings and the other one, where there are the least number of women, is Mechanics Engineering. The qualitative research with the students, made by interviews, showed that there is a gender discrimination among them. The boys do not consider their schoolmates competents for the exact sciences. The girls have to do a greater effort than the boys to success and to be respected by them. But even so they recognize that will not have the same opportunities of work that the men will. However, gender changes among the students are evidences that women have reached important places at the technological field.La investigación en una Universidad Tecnológica de Brasil entre estudiantes de los cursos de ingeniería ha mostrado que las mujeres no ocupan más que 12 % (en general de las plazas de la Institución. El curso con más estudiantes es el de Ingeniería Civil, mientras el curso con el más pequeño número de mujeres es el de Mecánica. La metodología de la investigación ha sido cualitativa. Las entrevistas con chicas-chicos de los cursos investigados revelaron que hay discriminación entre los estudiantes que no consideran a sus compañeras de curso competentes para los estudios de ciencias exactas. Para que sean respetadas ellas tienen que estudiar mucho más que ellos, pero, aunque logren muy buenas evaluaciones, reconocen que en el mercado laboral tendrán menos oportunidades de trabajo que sus colegas. Entretanto, los cambios de género entre los y las estudiantes evidencian que las mujeres están conquistando espacios importantes.

  8. Students’ Views of Distance Education Provision at One University

    Nalan YILMAZ

    2005-10-01

    Full Text Available Students’ Views of Distance Education Provision at One University Assist. Prof. Dr. Binnur Genç ILTERAkdeniz University, Faculty of Education Prof. Dr. Mualla Bilgin AKSUInönü University, Faculty of Education Lecturer. Nalan YILMAZAkdeniz University, Faculty of Education ABSTRACT Providing university students with distance education is of great importance in the global world. Distance education provides advantages and benefits especially for students who don’t have the chance to meet lecturers from other universities face to face. Distance education connects the learner and teacher to resources that are difficult to access otherwise. It is not necessary to gather students in one classroom at the same time in a distance program. Through distance education facilities students and lecturers can store, update and transfer information very quickly. Furthermore, distance education helps save money in terms of accommodation and travel expenses. This paper describes students’ perceptions and attitudes towards distance education based on their gender, school types attended, age and access to educational technology such as computer and internet. This paper also describes the specific program used by the faculty of Law at Akdeniz University,Turkey.

  9. Strategy for Nuclear Technology Education at Uppsala University

    Osterlund, M.; Hakansson, A.; Tengborn, E.

    2010-01-01

    After the TMI accident 1979, and later the Tjernobyl accident, the future of nuclear power was vividly debated in Sweden. The negative public opinion governed a number of political decisions that marked an ambition to out-phase nuclear power prior to 2010. Due to this, the student's interest in nuclear technology ceased and together with the fact that public funding to nuclear technology was withdrawn, academic research and education within the field were effectively dismounted. In the beginning of 1990 it became clear to the society that nuclear power could not easily be closed down and the issue of the future competence supply to the nuclear industry was initiated. In the mid-nineties the situation became acute due to the fact that personnel in the nuclear industry started to retire in an increasing pace necessitating measures to be taken in order to secure the future operation of the nuclear power plants. In the year 2000, the Swedish nuclear power plants, Westinghouse Electric Sweden and the Swedish Radiation Safety Authority embarked a project together with the three major universities in the field, Uppsala University, The Royal Institute of Technology and Chalmers University of Technology. The aim of this project was to define a financial platform for reconstructing the Swedish research and education in nuclear technology. The project, named the Swedish Centre for Nuclear Technology (SKC), has during a decade been the major financier to nuclear technology research and education. Using funding from SKC, Uppsala University formulated a strategy along two tracks: 1) Instead of creating ambitious master programs in nuclear technology, the already existing engineering programs in a wide range of fields were utilized to expose as many students as possible to nuclear technology. 2) A program was initiated together with the nuclear industry aiming at educating newly employed personnel. The result is encouraging; starting from essentially zero, typically 100

  10. Students' Attitudes towards Interdisciplinary Education: A Course on Interdisciplinary Aspects of Science and Engineering Education

    Gero, Aharon

    2017-01-01

    A course entitled "Science and Engineering Education: Interdisciplinary Aspects" was designed to expose undergraduate students of science and engineering education to the attributes of interdisciplinary education which integrates science and engineering. The core of the course is an interdisciplinary lesson, which each student is…

  11. Building a more diverse biomedical engineering workforce: Biomedical engineering at the university of the district of Columbia, a historically black college & university.

    Thompson, Lara A; Adebayo, A Segun; Nian Zhang; Haghani, Sasan; Dowell, Kathleen; Shetty, Devdas

    2016-08-01

    Biomedical Engineering (BME) is a new, multidisciplinary, and rapidly growing field, however, the BME Workforce suffers from limited ethnic and gender diversity. Despite the demand and growth of this new field due to its public health importance, only 4 out of the 107 Historically Black Colleges and Universities (HBCUs) nationwide offers a Bachelor's of Science (B.S.) in Bio-Engineering related fields. In order to contribute to a growing BME Workforce, HBCUs need to react and offer more degree-programs relevant to BME. At the University of the District of Columbia (UDC), an HBCU and the District's only public institution for higher learning, we have recently established a new, degree program: Bachelor of Science in Biomedical Engineering (B.S. in BME) full-board approved in Fall 2014, with program activities initiated in Fall 2015. The educational goal of this program is to enhance the quality and diversity of the BME Workforce via student professional development, new and relevant BME courses, and BME scholarly activities (e.g., guest lectures and journal club sessions), ultimately to increase the number of ethnic minorities pursuing careers and degrees in BME. Through our program activities, we are aiming to meet the nation's demand to contribute to a diverse BME workforce, directed towards solving problems in human health. A secondary, but related goal, is to increase the diversity of STEM-related fields. This paper summarizes our initial, but encouraging, BME activity-related findings. However, this study will be longitudinal (on a multiple year time period) to observe the true outcomes of our initiative.

  12. The Electrical Engineering Curriculum at the Technical University of Denmark - Options in Microelectronics

    Bruun, Erik; Nielsen, Lars Drud

    1997-01-01

    This paper describes the modular structure of the engineering curriculum at the Technical University of Denmark. The basic requirements for an electrical engineering curriculum are presented and different possibilities for specialization in microelectronics and integrated circuit design...

  13. Using Sustainability Engineering to Gain Universal Sustainability Efficiency

    Aleksandras Vytautas Rutkauskas

    2012-05-01

    Full Text Available The present article is an attempt to perceive the universal sustainability observable in an individual country or region, where the religious, political, social-demographic, economic, environmental, creative, technological and investment subsystems are revealed not only through the vitality of spiritual and material existence media, but rather through the signs of the development of these subsystems as self-assembled units through the erosion of their interaction. The problem of optimal allocation of investment resources among the separate sustainability’s subsystems was addressed by means of expert methods and techniques of portfolio methodology which will enable the achievement of the enshrined universal sustainability standards. A country-specific index composition of sustainability subsystems’ indices was chosen as the universal sustainability index for the specific country. The index in its dynamics is perceived as a random process. While projecting its state and evaluating its power, i.e., the impact of the subsystem efficiency in a particular moment, this power is measured by the level of the index and the reliability or guarantee of an appropriate level. To solve the problem of investment resources allocation, the idea of Markowitz Random Field was invoked in order to reach the maximum power of sustainability index while applying the technical solution—the so-called “GoldSim” system. Engineering is a methodology that aspires to reveal the core attributes of complex systems and instruments in order to manage the possibility to influence these properties for the systems. Experimental expert evaluation and case study is performed on Lithuanian data.

  14. Educating the engineers of 2020: An outcomes-based typology of engineering undergraduates

    Knight, David B.

    Members of government and industry have called for greater emphasis within U.S. colleges and universities on producing engineers who can enter and advance a more competitive, globally connected workforce. Looking toward this future, engineers will need to exhibit strong analytical skills as in the past, but they also will need to be proficient in a cadre of new abilities to compete. This study examines, in combination, an array of knowledge and skills aligned with the National Academy of Engineering's "engineer of 2020." The study has two major goals. The first is to develop a typology of engineering students based on the learning outcomes associated with the engineer of E2020. The second is to understand the educational experiences that distinguish these groups of students who resemble, more or less, the engineer of 2020. This approach acknowledges that engineering graduates need a complex skill set to succeed in the new global economy; it is the combination of skills associated with the engineer of 2020, not the individual skills in isolation, which will ensure graduates can respond to workforce needs of the future. To date, research on student outcomes has studied learning outcomes independent of one another rather than investigating student learning holistically. The study uses student data from the Prototype to production: Processes and conditions for preparing the Engineer of 2020 study, sponsored by the National Science Foundation (NSF EEC-0550608). Engineering students from a nationally representative sample of engineering programs in the United States answered a survey that collected information on their pre-college academic preparation and sociodemographic characteristics, their curricular and co-curricular experiences in their engineering programs, and their self-ratings of their engineering-related competencies. Only data on engineering students in their senior year (n=2,422) were utilized in analyses. Analyses were conducted in multiple phases for each

  15. Post TMI-2 view on the responsibilities of nuclear engineering educators

    Long, R.L.

    1980-01-01

    The Three Mile Island (TMI) accident of March 28, 1979 was the result of a complex set of interactions involving design deficiencies, equipment failure and human error. Nuclear engineering educators may need to accept responsibility for some of the underlying, industry-wide causes leading to the event. The many detailed investigations and recommendations following the accident are certain to have a significant impact on nuclear engineering education. Areas of impact include changes in curricula, increased demand for graduates, heavier involvement in utility staff training and education, and new approaches to university, industry, and societal interactions

  16. Re-engineering change in higher education

    David Allen

    1999-01-01

    Full Text Available Business Process Re-engineering (BPR is being used in a number of UK Higher Education Institutions (HEIs as a change management strategy. Whilst the focus of these HEIs is on re-engineering administrative services, there are also tentative attempts to redesign teaching and learning. This paper adopts a case study approach to determine the applicability of BPR to HEIs. The research started from a broad research question: How does organisational culture in HEIs impact on the implementation of BPR programmes? The conclusions drawn from the research are that the organisational culture and structure of HEIs limit the degree of change sought from a BPR project: the focus of the case study HEIs was on incremental process improvement of administrative services. The projects in these institutions were not about radical change. BPR techniques are shown to have something to offer HEIs in terms of co-ordinating administrative activities, but the emphasis on IT and processes in project design means the human resources change necessary for significant gains in efficiency is unlikely.

  17. Development of ergonomic website for engineering education

    Faradilla Arnes

    2018-01-01

    Full Text Available Engineering education contains two aspects; theory and practice. Practice activity supports the students to implement the theory obtained in the class. Therefore, it will be better if the theory has material visualization in order to support and make easier the student and lecturer in teaching activity. Analisis Perancangan Kerja dan Ergonomi (APK & E is one of the laboratories in Industrial Engineering, Universitas Islam Indonesia. APK & E laboratory which uses website as a tool to communicate to the students. Currently, the existing website still show standard display by conventional way. Based on the questionnaire, the student difficult to understand the material especially for Micromotion Study since this material requires the video to show the student in assembly activity. Augmented Reality (AR combines the real and virtual objects that interactive in the real time and registered in 3D space. AR also combines the real and virtual in displaying information in the real time, in a way that enhances the individual abilities to operate the system in the real world. The system which combines between AR and Micromotion Study was come up. The required software to develop the online AR system is FLARToolKit 2.5.1. In this research, marker detection accuracy measurement of the used toolkit has been conducted and it showed 85% of accuracy level.

  18. Educating the Engineer for Sustainable Community Development

    Munoz, D. R.

    2008-12-01

    More than ever before, we are confronting the challenges of limited resources (water, food, energy and mineral), while also facing complex challenges with the environment and related social unrest. Resource access problems are exacerbated by multi-scale geopolitical instability. We seek a balance that will allow profit but also leave a world fit for our children to inherit. Many are working with small groups to make positive change through finding solutions that address these challenges. In fact, some say that in sum, it is the largest human movement that has ever existed. In this talk I will share our experiences to alleviate vulnerabilities for populations of humans in need while working with students, corporate entities and non governmental organizations. Our main focus is to educate a new cadre of engineers that have an enhanced awareness of and better communication skills for a different cultural environment than the one in which they were raised and are hungry to seek new opportunities to serve humanity at a basic level. The results of a few of the more than forty humanitarian engineering projects completed since 2003 will be superimposed on a theoretical framework for sustainable community development. This will be useful information to those seeking a social corporate position of responsibility and a world that more closely approaches a sustainable equilibrium.

  19. The Atlantic rift in Engineering Education Research Methodology

    de Graaff, Erik

    2015-01-01

    engineering. A revival of engineering education research started in the USA around the turn of the century. Building on the concept of ‘scholarship of teaching’, engineers were challenged to investigate their own role as educators. Since these researchers have their academic background mostly in engineering......In Europe educational research branched off from social sciences during the sixties of the last century. Combining theories and methods from pedagogy, sociology and psychology researchers explored the different fields of education, ranging from kindergarten till higher education including...... and science, they tend to aim for ‘rigorous research’ according to the natural sciences. Worldwide the engineering education community has recognized the need to blend both the social sciences research approach and rigorous research. This paper explores the variation in research methods used by researchers...

  20. Quality of university education – starting points and objectives

    Floreková ¼ubica

    2002-12-01

    Full Text Available Quality of university education as a service for clients (students, potential employers, and society is presently a very important goal for university and their faculties.International agreements (Bologna appeal of Ministries of Education from 1998, international institutions (OECD– a list of internationally validated universities and study branches, and the Slovak legislation (Act No 131/2002 on universities, Act No 132/2002 on scientist and techniques must be implemented in the context of the self–evaluation process of educational institutions and of the European Foundation Quality Model of Excellence (EFQM.The given documents allow making an internal analysis by any university oriented to the process and consumer approach and to the objectives, forms, content and organization of university education.The quality of education is a subsystem of the quality of the educational institution. This quality determines the competitive status of this institution on the market of postsecondary and part-time education.The quality of university education is however connected not only with the material and information sources, but also especially with the human factor. Ethos, pathos and logos, i.e. the soft factors of universities as providers of education are necessary part of every Alma Mater.