WorldWideScience

Sample records for universally accepted reliable

  1. Bayesian methodology for reliability model acceptance

    International Nuclear Information System (INIS)

    Zhang Ruoxue; Mahadevan, Sankaran

    2003-01-01

    This paper develops a methodology to assess the reliability computation model validity using the concept of Bayesian hypothesis testing, by comparing the model prediction and experimental observation, when there is only one computational model available to evaluate system behavior. Time-independent and time-dependent problems are investigated, with consideration of both cases: with and without statistical uncertainty in the model. The case of time-independent failure probability prediction with no statistical uncertainty is a straightforward application of Bayesian hypothesis testing. However, for the life prediction (time-dependent reliability) problem, a new methodology is developed in this paper to make the same Bayesian hypothesis testing concept applicable. With the existence of statistical uncertainty in the model, in addition to the application of a predictor estimator of the Bayes factor, the uncertainty in the Bayes factor is explicitly quantified through treating it as a random variable and calculating the probability that it exceeds a specified value. The developed method provides a rational criterion to decision-makers for the acceptance or rejection of the computational model

  2. Perceptions of acceptable conducts by university students

    Directory of Open Access Journals (Sweden)

    Dora Nazaré Marques

    2016-07-01

    Conclusion: Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take action.

  3. Perceptions of acceptable conducts by university students.

    Science.gov (United States)

    Marques, Dora Nazaré; Macedo, António Filipe

    2016-01-01

    To determine perceptions of acceptable conducts amongst under and postgraduate optometry students and to compare them with students from other disciplines. Students (under/postgraduate) of optometry (n=156) and other courses (n=54) from University of Minho participated in a voluntary online questionnaire about perception of conducts, classifying as acceptable or unacceptable 15 academic or professional scenarios. 210 questionnaires were analyzed. Differences in perceptions were found between optometry under and postgraduates in scenario 5, Chi-square(2,156)=4.3, p=0.038, and scenario 7, Chi-square(2,156)=7.0, p=0.008 (both with cheating more acceptable for postgrads). Differences between under and postgraduates from other courses were found in scenario 9 (taking supplies from classroom more acceptable for undergrads), Chi-square(1,54)=5.0, p=0.025, and scenario 14 (forging a signature more acceptable for postgrads), Chi-square(1,54)=3.9, p=0.046. Differences between optometry and other courses undergraduates were observed in scenario 2 (plagiarism more acceptable for optometry undergrads), Chi-square(1,154)=8.3, p=0.004 and scenario 9 (taking supplies from classroom more acceptable for other undergrads), chi-square(1,54)=7.8, p=0.005. Differences between optometry and other courses postgraduates were observed in scenario 7, Chi-square(1,56)=5.8, p=0.016, scenario 10 (both with cheating more acceptable for optometry postgrads), chi-square(1,54)=8.1, p=0.004 and scenario 14 (forging a signature more acceptable for other postgrads), Chi-square(1,54)=6.1, p=0.026. Academic misconducts were mainly considered more acceptable than professional misconducts. Our results show that perceptions of acceptable conducts amongst optometry students are not very different from other students, and, against our initial prediction, do not show a general change in misconduct perception when students become more mature. Universities should pay more attention to this problem and take

  4. Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

    Science.gov (United States)

    Akmaz, Hazel Ekin; Uyar, Meltem; Kuzeyli Yıldırım, Yasemin; Akın Korhan, Esra

    2018-05-29

    Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Methodological and cross sectional study. A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance of chronic pain.

  5. Validity and Reliability of the Turkish Chronic Pain Acceptance Questionnaire

    Directory of Open Access Journals (Sweden)

    Hazel Ekin Akmaz

    2018-05-01

    Full Text Available Background: Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. In assessing patients with chronic pain in Turkey, making a diagnosis and tracking the effectiveness of treatment is done with scales that have been translated into Turkish. However, there is as yet no valid and reliable scale in Turkish to assess the acceptance of pain. Aims: To validate a Turkish version of the Chronic Pain Acceptance Questionnaire developed by McCracken and colleagues. Study Design: Methodological and cross sectional study. Methods: A simple randomized sampling method was used in selecting the study sample. The sample was composed of 201 patients, more than 10 times the number of items examined for validity and reliability in the study, which totaled 20. A patient identification form, the Chronic Pain Acceptance Questionnaire, and the Brief Pain Inventory were used to collect data. Data were collected by face-to-face interviews. In the validity testing, the content validity index was used to evaluate linguistic equivalence, content validity, construct validity, and expert views. In reliability testing of the scale, Cronbach’s α coefficient was calculated, and item analysis and split-test reliability methods were used. Principal component analysis and varimax rotation were used in factor analysis and to examine factor structure for construct concept validity. Results: The item analysis established that the scale, all items, and item-total correlations were satisfactory. The mean total score of the scale was 21.78. The internal consistency coefficient was 0.94, and the correlation between the two halves of the scale was 0.89. Conclusion: The Chronic Pain Acceptance Questionnaire, which is intended to be used in Turkey upon confirmation of its validity and reliability, is an evaluation instrument with sufficient validity and reliability, and it can be reliably used to examine patients’ acceptance

  6. Religiosity, Religious Acceptance, Social Interaction, and Satisfaction with University Experience

    Science.gov (United States)

    Mohebpour, Ida; Reysen, Stephen; Gibson, Shonda; Hendricks, LaVelle

    2017-01-01

    We tested a mediated moderation model with the interaction of students' degree of religiosity and perception of the university environment as accepting of one's religion predicting satisfaction with the university mediated by positive social relations. When the university was perceived as accepting of one's religion (vs less accepting), greater…

  7. Automatically generated acceptance test: A software reliability experiment

    Science.gov (United States)

    Protzel, Peter W.

    1988-01-01

    This study presents results of a software reliability experiment investigating the feasibility of a new error detection method. The method can be used as an acceptance test and is solely based on empirical data about the behavior of internal states of a program. The experimental design uses the existing environment of a multi-version experiment previously conducted at the NASA Langley Research Center, in which the launch interceptor problem is used as a model. This allows the controlled experimental investigation of versions with well-known single and multiple faults, and the availability of an oracle permits the determination of the error detection performance of the test. Fault interaction phenomena are observed that have an amplifying effect on the number of error occurrences. Preliminary results indicate that all faults examined so far are detected by the acceptance test. This shows promise for further investigations, and for the employment of this test method on other applications.

  8. Deans in German Universities: Goal Acceptance and Task Characteristics

    Science.gov (United States)

    Scholkmann, Antonia

    2011-01-01

    This paper presents an empirical study which explored how deans at German universities accept their new role as manager, and which factors influence the acceptance of this role. Within a framework referring to Locke and Latham's goal setting theory, the acceptance of operative goals implemented in the faculties served as an indicator of how well…

  9. Assessing the Acceptance of a Blended Learning University Course

    Science.gov (United States)

    Tselios, Nikolaos; Daskalakis, Stelios; Papadopoulou, Maria

    2011-01-01

    Usefulness and ease of use proved to be key determinants of the acceptance and usage of e-learning. On the contrary, little is known about students' perceptions in a blended learning setting. In this paper, the Technology Acceptance Model (TAM) was utilised, in order to investigate Greek university students' attitudes toward blended learning. The…

  10. Perception of Parental Acceptance and Rejection among Swedish University Students.

    Science.gov (United States)

    Kitahara, Michio

    1987-01-01

    Results of administering the Parental Acceptance-Rejection and Personality Assessment Questionnaires to 71 Swedish university students showed significant relationships between various forms of parental rejection in childhood and negative personality assessment of the self as an adult. Females showed more dependence and emotional instability than…

  11. Behavioral and Personality Predictors of Acceptance and Rejection in University

    Directory of Open Access Journals (Sweden)

    Daniel Bartholomeu

    Full Text Available Abstract: Acceptance and rejection in the group are related to both personality characteristics and social skills and most studies focus on children instead of college students. The objective of this study was to investigate whether acceptance and rejection would be more associated with personality tendencies, specifically socialization or social skills. We collected data from 187 college students attending the Physical Education (67% and Psychology (32% courses. The instruments were the sociometric test, the Factorial Scale of Socialization and the Social Skills Inventory. A moderating effect of gender in the relationship between assertiveness and acceptance and rejection to go out on college was observed. Social skills were better predictors of acceptance and social rejection in the university group.

  12. JUPITER PROJECT - JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY

    Science.gov (United States)

    The JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) project builds on the technology of two widely used codes for sensitivity analysis, data assessment, calibration, and uncertainty analysis of environmental models: PEST and UCODE.

  13. Utilization of a university reactor for public acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Myung Hyun [Kyung Hee Univ., Gyeonggi-do (Korea, Republic of). Reactor Research and Education Center

    2015-06-15

    AGN-201K is a university reactor in Kyung Hee University (KHU) mainly used for student education as training short course as well as academic course for senior-level. After the Fukushima accident, public concern on radiation hazard has been increased beyond rational level at a neighboring country. It was found that AGN-201K be the perfect tool for interaction with general public. It is very safe to operate with general participants because it is adapted to the very low power. However, radiation level is reasonably high to detect and shield for practice. KHU has a Regional Radiation Monitoring Post where environmental radiation level at Suwon city is continuously measured. In this facility, radiation level at soil, rain, and local agricultural products were measured and reported to the national monitoring headquarter. A new mission of reactor research and education center of KHU has been tried from last summer. Facilities were opened for high school students and teachers for their science camps during summer and winter. A special public acceptance program named as experience camp for understanding the nuclear power and radiation was held 6 times for the last one-year period. Even though number of attendee was limited and small, feedback from participants was hot and positive enough to make professors be ready to sacrifice their personal time.

  14. Utilization of a university reactor for public acceptance

    International Nuclear Information System (INIS)

    Kim, Myung Hyun

    2015-01-01

    AGN-201K is a university reactor in Kyung Hee University (KHU) mainly used for student education as training short course as well as academic course for senior-level. After the Fukushima accident, public concern on radiation hazard has been increased beyond rational level at a neighboring country. It was found that AGN-201K be the perfect tool for interaction with general public. It is very safe to operate with general participants because it is adapted to the very low power. However, radiation level is reasonably high to detect and shield for practice. KHU has a Regional Radiation Monitoring Post where environmental radiation level at Suwon city is continuously measured. In this facility, radiation level at soil, rain, and local agricultural products were measured and reported to the national monitoring headquarter. A new mission of reactor research and education center of KHU has been tried from last summer. Facilities were opened for high school students and teachers for their science camps during summer and winter. A special public acceptance program named as experience camp for understanding the nuclear power and radiation was held 6 times for the last one-year period. Even though number of attendee was limited and small, feedback from participants was hot and positive enough to make professors be ready to sacrifice their personal time.

  15. Reliability of agriculture universal joint shafts based on temperature measuring in universal joint bearing assemblies

    Directory of Open Access Journals (Sweden)

    Аleksandar Asonja

    2015-03-01

    Full Text Available This paper presents a research into reliability calculations of agriculture double universal joint shafts based on temperature measuring in cardan-type universal joint bearing assemblies. Special laboratory equipment was developed for this research which is presented in the paper. The objective of this research was to test the real life span of universal joint shafts in the laboratory and in field, to obtain the results which can be used to improve the reliability of universal joint shafts. If the presented research were used along with maintenance measures recommended in the paper and with proper use, the level of reliability of the shafts would be 2.1 times higher. The presented results of the research showed that needle bearings, i.e. bearing assemblies of the joints, are the most critical elements on universal joint shafts and are possible causes of their lower reliability. The second universal joint is the part with the lowest reliability in the observed technical system.

  16. The Adaptation of Acceptance of Couple Violence Scale into Turkish: Validity and Reliability Studies

    Directory of Open Access Journals (Sweden)

    Özcan SEZER

    2008-01-01

    Full Text Available This study investigates the validity and reliability of the Turkish adaptation ofAcceptance of Couple Violence Scale (ACVS. The data of research has been attainedfrom 474 (M =243, F=231 high school students who were attending 1st, 2nd and 3thclass and coming from middle socio-economic levels in Malatya. Acceptance of CoupleViolence Scale has 11 items, Likert type and 4 point response format. The constructvalidity of ACVS was conducted by using exploratory factor analysis and varimaxrotation. Single independent factor with the eigenvalue over 1.00 has been found. Thisfactor explained 44% of total variance. To test concurrent validity, correlations betweenscores on ACVS and Aggressiveness Questionnaire were calculated. There was asignificant relationship between scores on the two scales (r= .61. Cronbach alphacoefficient of the scale was found “.87”; test-retest correlation coefficient was “r=.80”.Item-total correlation co-efficiencies vary between “.52” and “.71”. Findings show thatACVS can be used with acceptable level of validity and reliability for high schoolstudents.

  17. Validity, reliability, feasibility, acceptability and educational impact of direct observation of procedural skills (DOPS).

    Science.gov (United States)

    Naeem, Naghma

    2013-01-01

    Direct observation of procedural skills (DOPS) is a new workplace assessment tool. The aim of this narrative review of literature is to summarize the available evidence about the validity, reliability, feasibility, acceptability and educational impact of DOPS. A PubMed database and Google search of the literature on DOPS published from January 2000 to January 2012 was conducted which yielded 30 articles. Thirteen articles were selected for full text reading and review. In the reviewed literature, DOPS was found to be a useful tool for assessment of procedural skills, but further research is required to prove its utility as a workplace based assessment instrument.

  18. Student acceptance of e-books: A case study of landmark university ...

    African Journals Online (AJOL)

    Student acceptance of e-books was tested using UTAUT model. Performance expectancy Effort expectancy and Facilitating conditions were seen to significantly influence the acceptance of e-books by students in Landmark University, while Social Influence did not influence acceptance of e-books. Key Words: E-books, ...

  19. Exploring E-Learning Acceptance among University Students in Thailand: A National Survey

    Science.gov (United States)

    Teo, Timothy; Ruangrit, Nammon; Khlaisang, Jintavee; Thammetar, Thapanee; Sunphakitjumnong, Kobkul

    2014-01-01

    This study surveys the e-learning acceptance of university students in Thailand. One thousand nine hundred and eighty-one (1,981) participants completed the E-Learning Acceptance Measure (Teo, 2010) which measures three constructs that predict e-learning acceptance (tutor quality, perceived usefulness, and facilitating conditions). Data analysis…

  20. An Empirical Investigation of Student Acceptance of Synchronous E-Learning in an Online University

    Science.gov (United States)

    Kang, Minseok; Shin, Won sug

    2015-01-01

    This study proposes an extended technology acceptance model to predict acceptance of synchronous e-learning by examining relationships among variables associated with factors influencing the technology acceptance of synchronous e-learning. Learners at an online university participated through an online survey; there were 251 respondents in all.…

  1. Acceptance and Adoption of Open Access Publication (OAP) in University Libraries in South East Nigeria

    Science.gov (United States)

    Sambe, Manasseh Tyungu; Raphael, Gabriel Okplogidi

    2015-01-01

    This study examines the kinds of open access scholarly publication or information resources accepted and adopted by federal university libraries in South East Nigeria. The purpose was to determine the factors that affect open access scholarly publication or information resources acceptance and adoption in university libraries. The study adopted…

  2. Quality of the Critical Incident Technique in practice: Interrater reliability and users' acceptance under real conditions

    Directory of Open Access Journals (Sweden)

    ANNA KOCH

    2009-03-01

    Full Text Available The Critical Incident Technique (CIT is a widely used task analysis method in personnel psychology. While studies on psychometric properties of the CIT so far primarily took into account relevance ratings of task-lists or attributes, and hence, only a smaller or adapted part of the CIT, little is known about the psychometric properties of the complete CIT in its most meaningful and fruitful way. Therefore, the aim of the present study was to assess interrater reliability and the participants’ view of the CIT under real conditions and especially to provide data for the key step of the CIT: the classification of behavior descriptions into requirements. Additionally, the cost-benefit-ratio and practicability were rated from the participants’ views as an important indicator for the acceptance of the task analysis approach in practice. Instructors of German Institutions for Statutory Accidents Insurance and Prevention as well as their supervisors took part in a job analysis with the CIT. Moderate interrater reliability for the relevance rating was found while the classification step yielded unexpectedly low coefficients for interrater reliability. The cost-benefit-ratio and practicability of the complete CIT were rated very positive. The results are discussed in relation to determinants that facilitate or impede the application of task analysis procedures.

  3. Workplace-based assessment of communication skills: A pilot project addressing feasibility, acceptance and reliability

    Science.gov (United States)

    Weyers, Simone; Jemi, Iman; Karger, André; Raski, Bianca; Rotthoff, Thomas; Pentzek, Michael; Mortsiefer, Achim

    2016-01-01

    Background: Imparting communication skills has been given great importance in medical curricula. In addition to standardized assessments, students should communicate with real patients in actual clinical situations during workplace-based assessments and receive structured feedback on their performance. The aim of this project was to pilot a formative testing method for workplace-based assessment. Our investigation centered in particular on whether or not physicians view the method as feasible and how high acceptance is among students. In addition, we assessed the reliability of the method. Method: As part of the project, 16 students held two consultations each with chronically ill patients at the medical practice where they were completing GP training. These consultations were video-recorded. The trained mentoring physician rated the student’s performance and provided feedback immediately following the consultations using the Berlin Global Rating scale (BGR). Two impartial, trained raters also evaluated the videos using BGR. For qualitative and quantitative analysis, information on how physicians and students viewed feasibility and their levels of acceptance was collected in written form in a partially standardized manner. To test for reliability, the test-retest reliability was calculated for both of the overall evaluations given by each rater. The inter-rater reliability was determined for the three evaluations of each individual consultation. Results: The formative assessment method was rated positively by both physicians and students. It is relatively easy to integrate into daily routines. Its significant value lies in the personal, structured and recurring feedback. The two overall scores for each patient consultation given by the two impartial raters correlate moderately. The degree of uniformity among the three raters in respect to the individual consultations is low. Discussion: Within the scope of this pilot project, only a small sample of physicians and

  4. Workplace-based assessment of communication skills: A pilot project addressing feasibility, acceptance and reliability

    Directory of Open Access Journals (Sweden)

    Weyers, Simone

    2016-11-01

    Full Text Available Background: Imparting communication skills has been given great importance in medical curricula. In addition to standardized assessments, students should communicate with real patients in actual clinical situations during workplace-based assessments and receive structured feedback on their performance. The aim of this project was to pilot a formative testing method for workplace-based assessment. Our investigation centered in particular on whether or not physicians view the method as feasible and how high acceptance is among students. In addition, we assessed the reliability of the method.Method: As part of the project, 16 students held two consultations each with chronically ill patients at the medical practice where they were completing GP training. These consultations were video-recorded. The trained mentoring physician rated the student’s performance and provided feedback immediately following the consultations using the Berlin Global Rating scale (BGR. Two impartial, trained raters also evaluated the videos using BGR. For qualitative and quantitative analysis, information on how physicians and students viewed feasibility and their levels of acceptance was collected in written form in a partially standardized manner. To test for reliability, the test-retest reliability was calculated for both of the overall evaluations given by each rater. The inter-rater reliability was determined for the three evaluations of each individual consultation.Results: The formative assessment method was rated positively by both physicians and students. It is relatively easy to integrate into daily routines. Its significant value lies in the personal, structured and recurring feedback. The two overall scores for each patient consultation given by the two impartial raters correlate moderately. The degree of uniformity among the three raters in respect to the individual consultations is low.Discussion: Within the scope of this pilot project, only a small sample

  5. Workplace-based assessment of communication skills: A pilot project addressing feasibility, acceptance and reliability.

    Science.gov (United States)

    Weyers, Simone; Jemi, Iman; Karger, André; Raski, Bianca; Rotthoff, Thomas; Pentzek, Michael; Mortsiefer, Achim

    2016-01-01

    Background: Imparting communication skills has been given great importance in medical curricula. In addition to standardized assessments, students should communicate with real patients in actual clinical situations during workplace-based assessments and receive structured feedback on their performance. The aim of this project was to pilot a formative testing method for workplace-based assessment. Our investigation centered in particular on whether or not physicians view the method as feasible and how high acceptance is among students. In addition, we assessed the reliability of the method. Method: As part of the project, 16 students held two consultations each with chronically ill patients at the medical practice where they were completing GP training. These consultations were video-recorded. The trained mentoring physician rated the student's performance and provided feedback immediately following the consultations using the Berlin Global Rating scale (BGR). Two impartial, trained raters also evaluated the videos using BGR. For qualitative and quantitative analysis, information on how physicians and students viewed feasibility and their levels of acceptance was collected in written form in a partially standardized manner. To test for reliability, the test-retest reliability was calculated for both of the overall evaluations given by each rater. The inter-rater reliability was determined for the three evaluations of each individual consultation. Results: The formative assessment method was rated positively by both physicians and students. It is relatively easy to integrate into daily routines. Its significant value lies in the personal, structured and recurring feedback. The two overall scores for each patient consultation given by the two impartial raters correlate moderately. The degree of uniformity among the three raters in respect to the individual consultations is low. Discussion: Within the scope of this pilot project, only a small sample of physicians and

  6. 75 FR 6791 - Surety Companies Acceptable on Federal Bonds-Termination: Trinity Universal Insurance Company

    Science.gov (United States)

    2010-02-10

    .... However, no new bonds should be accepted from this company, and bonds that are continuous in nature should... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Trinity Universal Insurance Company AGENCY: Financial Management Service, Fiscal Service...

  7. Instrument for assessing mobile technology acceptability in diabetes self-management: a validation and reliability study.

    Science.gov (United States)

    Frandes, Mirela; Deiac, Anca V; Timar, Bogdan; Lungeanu, Diana

    2017-01-01

    Nowadays, mobile technologies are part of everyday life, but the lack of instruments to assess their acceptability for the management of chronic diseases makes their actual adoption for this purpose slow. The objective of this study was to develop a survey instrument for assessing patients' attitude toward and intention to use mobile technology for diabetes mellitus (DM) self-management, as well as to identify sociodemographic characteristics and quality of life factors that affect them. We first conducted the documentation and instrument design phases, which were subsequently followed by the pilot study and instrument validation. Afterward, the instrument was administered 103 patients (median age: 37 years; range: 18-65 years) diagnosed with type 1 or type 2 DM, who accepted to participate in the study. The reliability and construct validity were assessed by computing Cronbach's alpha and using factor analysis, respectively. The instrument included statements about the actual use of electronic devices for DM management, interaction between patient and physician, attitude toward using mobile technology, and quality of life evaluation. Cronbach's alpha was 0.9 for attitude toward using mobile technology and 0.97 for attitude toward using mobile device applications for DM self-management. Younger patients (Spearman's ρ =-0.429; P higher education level (Kendall's τ =0.51; P mobile assistive applications for DM control. Moreover, patients with a higher quality of life presented a significantly more positive attitude toward using modern technology (Spearman's ρ =0.466; P mobile technology for DM self-management. Additionally, we found that even if most of the patients showed positive attitude toward mobile applications, only a moderate level of intention to indeed use them was observed. Moreover, the study indicated that barriers were truthfulness and easiness to use.

  8. Smart phone Acceptance among physicians: Application of structural equation modeling in Iranian largest university

    Directory of Open Access Journals (Sweden)

    Nematollahi M.

    2017-03-01

    Full Text Available Background: The present study aimed to determine attitudes and effective factors in the acceptance of smart phones by physicians of the largest University of Medical Sciences in the south of Iran. Methods: This cross-sectional study was performed using Structural Equation Modelling (SEM in 2014. Study participants included 200 physicians working in the hospitals of Shiraz University of Medical Sciences selected through two-stage stratified sampling, but 185 participants completed the study. The study data were collected using a researcher-made questionnaire completed through a 5-point Likert scale. The content validity of the questionnaire was confirmed by a panel of experts, its construct validity by confirmatory factor analysis, and its reliability by Cronbach’s alpha of 0.802. All data analyses were performed using SPSS (version 22 and LISREL (version 8.8. Results: Results showed that most physicians had a desirable attitude towards using smart phones. Besides, the results of SEM indicated a significant relationship between attitude and compatibility, observability, personal experience, voluntariness of use and perceived usefulness. Moreover, some important fitness indices revealed appropriate fitness of the study model (p=0.26, X2 /df=1.35, RMR=0.070, GFI=0.77, AGFI=0.71, NNFI=0.93, CFI=0.94. Conclusion: The results revealed that compatibility, observability, personal experience, voluntariness of use and perceived usefulness were effective in the physicians’ attitude towards using smart phones. Thus, by preparation of the required infrastructures, policymakers in the field of health technology can enhance the utilization of smart phones in hospitals.

  9. Measuring Experiential Avoidance: Reliability and Validity of the Dutch 9-item Acceptance and Action Questionnaire (AAQ)

    NARCIS (Netherlands)

    Boelen, P.A.; Reijntjes, A.H.A.

    2008-01-01

    Three studies evaluated psychometric properties of the Dutch version of the 9-item Acceptance and Action Questionnaire (AAQ)—a self-report measure designed to assess experiential avoidance as conceptualized inAcceptance and Commitment Therapy (ACT). Study 1, among bereaved adults, showed that a

  10. YouTube Acceptance by University Educators and Students: A Cross-Cultural Perspective

    Science.gov (United States)

    Jung, Insung; Lee, Yekyung

    2015-01-01

    Despite the huge popularity of YouTube, there has been little research into the factors affecting educational applications of this social medium. This study attempts to predict and compare factors influencing YouTube acceptance among university students and educators in two very different cultures, Japan and the USA, applying the Unified Theory of…

  11. Reliability and acceptability of a five-station multiple mini-interview model for residency program recruitment

    Directory of Open Access Journals (Sweden)

    Julian Diaz Fraga

    2013-12-01

    Full Text Available Background: Standard interviews are used by most residency programs in the United States for assessment of aptitude of the non-cognitive competencies, but variability of interviewer skill, interviewer bias, interviewer leniency or stringency, and context specificity limit reliability. Aim: To investigate reliability and acceptability of five-station multiple mini-interview (MMI model for resident selection into an internal medicine residency program in the United States. Setting: One independent academic medical center. Participants: Two hundred and thirty-seven applicants and 17 faculty interviewers. Program description: Five, 10-min MMI stations with five different interviewers blinded to the candidate's records and one traditional 20-min interview with the program director. Candidates were rated on two items: interpersonal and communication skills, and overall performance. Program evaluation: Generalizability data showed that the reliability of our process was high (>0.9. The results of anonymous surveys demonstrated that both applicants and interviewers consider the MMI as a fair and more effective tool to evaluate non-cognitive traits, and prefer the MMI to standard interviews. Discussion: The MMI process for residency interviews can generate reliable interview results using only five stations, and it is acceptable and preferred over standard interview modalities by the applicants and faculty members of one US residency program.

  12. Knowledge of Saudi female university students regarding cervical cancer and acceptance of the human papilloma virus vaccine.

    Science.gov (United States)

    Al-Shaikh, Ghadeer K; Almussaed, Eman M; Fayed, Amel A; Khan, Farida H; Syed, Sadiqa B; Al-Tamimi, Tahani N; Elmorshedy, Hala N

    2014-10-01

    To assess the level of knowledge regarding cervical cancer and the acceptance of the human papilloma virus (HPV) vaccine among Saudi female students in health colleges. This cross-sectional study of a convenient sample encompassed 1400 students in Health Colleges at Princess Nora Bint Abdul Rahman University, Riyadh, Saudi Arabia was conducted between December 2013 and February 2014. A self-administrated questionnaire was distributed to all participants. Data collected included socio-demographic data, knowledge of cervical cancer risk factors and clinical presentation, Pap smear, and HPV vaccine acceptance. The questionnaire reliability as tested by Cronbach's alpha was 0.82. The response rate was 89.9%, and data analysis revealed that 95.7% of students had poor knowledge level. The Pap smear was poorly recognized as a screening tool, with 46.7% of students having heard of the test. Senior and medical students had a significantly higher knowledge score. Father's health profession, high monthly income, and presence of cervical cancer among family members or friends increased the level of knowledge. Vaccine acceptance is influenced by its price, approximately 80% of students thought that an affordable vaccine price should not exceed 300 Saudi Riyals. Perceived barriers to the vaccine were fear of injections and vaccine side effects. There is a lack of knowledge and misinformation regarding cervical cancer, Pap smear, and HPV as a major risk factor for cancer of the cervix. These data can be used as a benchmark to formulate effective awareness programs. 

  13. BUILDING MODEL ANALYSIS APPLICATIONS WITH THE JOINT UNIVERSAL PARAMETER IDENTIFICATION AND EVALUATION OF RELIABILITY (JUPITER) API

    Science.gov (United States)

    The open-source, public domain JUPITER (Joint Universal Parameter IdenTification and Evaluation of Reliability) API (Application Programming Interface) provides conventions and Fortran-90 modules to develop applications (computer programs) for analyzing process models. The input ...

  14. Validity, Reliability and Psychometric Evaluation of Persian Version of Young Internet Addiction Questionnaire For Tabriz University and Tabriz University of Medical Sciences Students

    Directory of Open Access Journals (Sweden)

    Arash Mohagheghi

    2015-12-01

    Full Text Available Introduction: The concept of addiction has developed enough to be used outside of areas such as drugs and alcohol and is being generally applied to many other behaviors such as internet use. The aim of this study is to evaluate the validity and reliability of the Persian version of the Young Internet Addiction Questionnaire (YIAQ in university students in Tabriz. Methods: Initially, YIAQ was translated from English to Persian by someone with expert English skills, and then the Persian version was translated to English by another person. After that, a specialist in the field of psychiatry with acceptable skills in the field of English compared these two versions and suggested needed changes. In this methodological (mixed method study, the Delphi method was used in the qualitative part and a cross-sectional design was used in the quantitative part. The Persian version was evaluated using the Delphi method by ten specialists in the field of internet use and they mentioned changes needed to evaluate face and content validity. For the evaluation of the Cronbach’s alpha coefficient, 200 students with different majors at Tabriz University were selected randomly and filled out the Persian version of YIAQ. Reliability was confirmed by clinical interview. Results: The reliability of the questionnaire was acceptable for 20 questions with Cronbach’s alpha coefficient of 0.93. The face and content validity were determined by the Delphi method and application of opinions of specialists in the field of internet use. Conclusion: The Persian version of YIAQ is valid and reliable for the evaluation of internet addiction

  15. Past-behavioural versus situational questions in a postgraduate admissions multiple mini-interview: a reliability and acceptability comparison.

    Science.gov (United States)

    Yoshimura, Hiroshi; Kitazono, Hidetaka; Fujitani, Shigeki; Machi, Junji; Saiki, Takuya; Suzuki, Yasuyuki; Ponnamperuma, Gominda

    2015-04-14

    The Multiple Mini-Interview (MMI) mostly uses 'Situational' Questions (SQs) as an interview format within a station, rather than 'Past-Behavioural' Questions (PBQs), which are most frequently adopted in traditional single-station personal interviews (SSPIs) for non-medical and medical selection. This study investigated reliability and acceptability of the postgraduate admissions MMI with PBQ and SQ interview formats within MMI stations. Twenty-six Japanese medical graduates, first completed the two-year national obligatory initial postgraduate clinical training programme and then applied to three specialty training programmes - internal medicine, general surgery, and emergency medicine - in a Japanese teaching hospital, where they underwent the Accreditation Council for Graduate Medical Education (ACGME)-competency-based MMI. This MMI contained five stations, with two examiners per station. In each station, a PBQ, and then an SQ were asked consecutively. PBQ and SQ interview formats were not separated into two different stations, or the order of questioning of PBQs and SQs in individual stations was not changed due to lack of space and experienced examiners. Reliability was analysed for the scores of these two MMI question types. Candidates and examiners were surveyed on this experience. The PBQ and SQ formats had generalisability coefficients of 0.822 and 0.821, respectively. With one examiner per station, seven stations could produce a reliability of more than 0.80 in both PBQ and SQ formats. More than 60% of both candidates and examiners felt positive about the overall candidates' ability. All participants liked the fairness of this MMI when compared with the previously experienced SSPI. SQs were perceived more favourable by candidates; in contrast, PBQs were perceived more relevant by examiners. Both PBQs and SQs are equally reliable and acceptable as station interview formats in the postgraduate admissions MMI. However, the use of the two formats within the

  16. Workplace Based Assessment in an Asian Context: Trainees’ and Trainers’ Perception of Validity, Reliability, Feasibility, Acceptability, and Educational Impact

    Directory of Open Access Journals (Sweden)

    Jackson Tan

    2015-01-01

    Full Text Available Workplace based assessment (WPBA is commonplace in postgraduate training in many countries but is not widely practised and established in Asia. The WPBA tools that are used by the local programme are Mini-Clinical Examination (Mini-CEX, Directly Observed Practical Skills (DOPSs, Multisource Feedback (MSF, and Case Based Discussion (CBD. This cross-sectional study utilised a questionnaire to obtain feedback from both assessors and trainees. Participants rated the tools on a 5-point scale on validity, reliability, feasibility, educational impact, and acceptability. 30 assessors and 23 trainees participated in the study. The percentages of adequate ratings given by trainees for validity, reliability, feasibility, educational impact, and acceptability were 100%, 99%, 91%, 100%, and 100%, respectively, for all tools. There was no difference in perceptions between trainees and assessors for all WPBA tools except MSF (p<0.05. The common themes that have arisen suggested that applicability of WPBA could be affected by faculty development, endorsement from governing bodies, pervading cultural mindsets, and the complex relationships between doctors and patients; teachers and students; and educators and clinicians. The high level of satisfaction from our respondents indicates that WPBA can be successfully integrated in an Asian postgraduate training programme despite systemic, cultural, and language barriers.

  17. Reliability

    OpenAIRE

    Condon, David; Revelle, William

    2017-01-01

    Separating the signal in a test from the irrelevant noise is a challenge for all measurement. Low test reliability limits test validity, attenuates important relationships, and can lead to regression artifacts. Multiple approaches to the assessment and improvement of reliability are discussed. The advantages and disadvantages of several different approaches to reliability are considered. Practical advice on how to assess reliability using open source software is provided.

  18. Factor structure and correlates of the acceptance of cosmetic surgery scale among South Korean university students.

    Science.gov (United States)

    Swami, Viren; Hwang, Choon-Sup; Jung, Jaehee

    2012-02-01

    Research on the acceptance of cosmetic surgery has focused on relatively affluent Western samples, to the exclusion of non-Western samples and any potential cross-cultural differences. While rates of cosmetic surgery in South Korea have risen sharply in the past decade, mirroring rates in other East Asian nations, little is known about attitudes toward cosmetic surgery in the Korean population. To examine the factor structure and correlates of a Korean adaptation of the previously-published Acceptance of Cosmetic Surgery Scale (ACSS). South Korean university students (N = 267) completed the ACSS, as well as included Korean translations of measures for actual vs. ideal body weight discrepancy, body appreciation, sociocultural attitudes toward appearance, and demographics. The Korean ACSS reduced to a two-factor solution, mirroring results among other non-Western samples, although a one-factor solution was deemed more plausible. Compared to men, women had significantly higher total scores, suggesting that they were more accepting of cosmetic surgery. A multiple regression showed that, after controlling for the effects of participant sex, the only significant predictor of acceptance of cosmetic surgery was general body appreciation, suggesting that some may view cosmetic surgery as a means of enhancing their body image. The results reveal important global information for plastic surgeons-not only on the treatment of non-Western patients but on the South Korean market, in which the cosmetic surgery industry remains unregulated. Given the popularity and acceptance of cosmetic surgery in South Korea, there is an urgent need for regulatory intervention to ensure patient safety and satisfaction.

  19. Reliability and acceptability of the Multiple Sclerosis Quality of Life-29 questionnaire in an English-speaking cohort.

    Science.gov (United States)

    Baker, Georgina; Nair, Krishnan Padmakumari Sivaraman; Baster, Kathleen; Rosato, Rosalba; Solari, Alessandra

    2018-05-01

    Multiple Sclerosis Quality-of-Life Questionnaire-54 (MSQoL-54) is a disease-specific instrument for assessing health-related quality of life (HRQoL). Due to the number of items, the time taken to complete it is long. A shorter 29-item version, Multiple Sclerosis Quality-of-Life Questionnaire-29 (MSQoL-29) is yet to be evaluated in English. To assess reliability and acceptability of English version of MSQoL-29. Among 100 participants with MS who first completed both MSQoL-54 and MSQoL-29, 91 completed MSQoL-29 after 4-8 weeks. We looked for internal consistency (Cronbach's alpha), acceptability, reliability (intraclass correlation coefficients (ICCs)) and agreement (Bland-Altman plots). ICCs were strongly positive between MSQoL-54 and MSQoL-29 (Physical Health Composite (PHC) -ICC = 0.914, confidence interval (CI) = 0.872-0.942; Mental Health Composite (MHC) - ICC = 0.875, CI = 0.814-0.916) and between the two MSQoL-29 (PHC - ICC = 0.970, CI = 0.955-0.980; MHC - ICC = 0.937, CI = 0.904-0.958). On Bland-Altman plots, the MSQoL-29 scores of 95% of participants during two visits were within the limits of agreement (LOAs). Time taken to complete MSQoL-29 was 7.2 ± 2.9 minutes and MSQoL-54 was 19.79 ± 5.4 minutes ( p = 0.0001). MSQoL-29 has good test-retest reliability in English-speaking population and was quicker to complete.

  20. Several submaximal exercise tests are reliable, valid and acceptable in people with chronic pain, fibromyalgia or chronic fatigue: a systematic review

    Directory of Open Access Journals (Sweden)

    Julia Ratter

    2014-09-01

    [Ratter J, Radlinger L, Lucas C (2014 Several submaximal exercise tests are reliable, valid and acceptable in people with chronic pain, fibromyalgia or chronic fatigue: a systematic review. Journal of Physiotherapy 60: 144–150

  1. Knowledge of Saudi female university students regarding cervical cancer and acceptance of the human papilloma virus vaccine

    Science.gov (United States)

    Al-Shaikh, Ghadeer K.; Almussaed, Eman M.; Fayed, Amel A.; Khan, Farida H.; Syed, Sadiqa B.; Al-Tamimi, Tahani N.; Elmorshedy, Hala N.

    2014-01-01

    Objectives: To assess the level of knowledge regarding cervical cancer and the acceptance of the human papilloma virus (HPV) vaccine among Saudi female students in health colleges. Methods: This cross-sectional study of a convenient sample encompassed 1400 students in Health Colleges at Princess Nora Bint Abdul Rahman University, Riyadh, Saudi Arabia was conducted between December 2013 and February 2014. A self-administrated questionnaire was distributed to all participants. Data collected included socio-demographic data, knowledge of cervical cancer risk factors and clinical presentation, Pap smear, and HPV vaccine acceptance. The questionnaire reliability as tested by Cronbach’s alpha was 0.82. Results: The response rate was 89.9%, and data analysis revealed that 95.7% of students had poor knowledge level. The Pap smear was poorly recognized as a screening tool, with 46.7% of students having heard of the test. Senior and medical students had a significantly higher knowledge score. Father’s health profession, high monthly income, and presence of cervical cancer among family members or friends increased the level of knowledge. Vaccine acceptance is influenced by its price, approximately 80% of students thought that an affordable vaccine price should not exceed 300 Saudi Riyals. Perceived barriers to the vaccine were fear of injections and vaccine side effects. Conclusion: There is a lack of knowledge and misinformation regarding cervical cancer, Pap smear, and HPV as a major risk factor for cancer of the cervix. These data can be used as a benchmark to formulate effective awareness programs. PMID:25316467

  2. Reliability and Validity of Objective Structured Clinical Examination for Residents of Obstetrics and Gynecology at Kermanshah University of Medical Sciences

    Directory of Open Access Journals (Sweden)

    Nasrin Jalilian

    2012-11-01

    Full Text Available Introduction: Objective structured clinical examination (OSCE is used for the evaluation of the clinical competence in medicine for which it is essential to measure validity and reliability. This study aimed to investigate the validity and reliability of OSCE for residents of obstetrics and gynecology at Kermanshah University of Medical Sciences in 2011.Methods: A descriptive-correlation study was designed and the data of OSCE for obstetrics and gynecology were collected via learning behavior checklists in method stations and multiple choice questions in question stations. The data were analyzed through Pearson correlation coefficient and Cronbach's alpha, using SPSS software (version 16. To determine the criterion validity, correlation of OSCE scores with scores of resident promotion test, direct observation of procedural skills, and theoretical knowledge was determined; for reliability, however, Cronbach's alpha was used. Total sample consisted of 25 participants taking part in 14 stations. P value of less than 0.05 was considered as significant.Results: The mean OSCE scores was 22.66 (±6.85. Criterion validity of the stations with resident promotion theoretical test, first theoretical knowledge test, second theoretical knowledge, and direct observation of procedural skills (DOPS was 0.97, 0.74, 0.49, and 0.79, respectively. In question stations, criterion validity was 0.15, and total validity of OSCE was 0.77.Conclusion: Findings of the present study indicated acceptable validity and reliability of OSCE for residents of obstetrics and gynecology.

  3. Generalizability Theory Reliability of Written Expression Curriculum-Based Measurement in Universal Screening

    Science.gov (United States)

    Keller-Margulis, Milena A.; Mercer, Sterett H.; Thomas, Erin L.

    2016-01-01

    The purpose of this study was to examine the reliability of written expression curriculum-based measurement (WE-CBM) in the context of universal screening from a generalizability theory framework. Students in second through fifth grade (n = 145) participated in the study. The sample included 54% female students, 49% White students, 23% African…

  4. [Knowledge of university students in Szeged, Hungary about reliable contraceptive methods and sexually transmitted diseases].

    Science.gov (United States)

    Devosa, Iván; Kozinszky, Zoltán; Vanya, Melinda; Szili, Károly; Fáyné Dombi, Alice; Barabás, Katalin

    2016-04-03

    Promiscuity and lack of use of reliable contraceptive methods increase the probability of sexually transmitted diseases and the risk of unwanted pregnancies, which are quite common among university students. The aim of the study was to assess the knowledge of university students about reliable contraceptive methods and sexually transmitted diseases, and to assess the effectiveness of the sexual health education in secondary schools, with specific focus on the education held by peers. An anonymous, self-administered questionnaire survey was carried out in a randomized sample of students at the University of Szeged (n = 472, 298 women and 174 men, average age 21 years) between 2009 and 2011. 62.1% of the respondents declared that reproductive health education lessons in high schools held by peers were reliable and authentic source of information, 12.3% considered as a less reliable source, and 25.6% defined the school health education as irrelevant source. Among those, who considered the health education held by peers as a reliable source, there were significantly more females (69.3% vs. 46.6%, p = 0.001), significantly fewer lived in cities (83.6% vs. 94.8%, p = 0.025), and significantly more responders knew that Candida infection can be transmitted through sexual intercourse (79.5% versus 63.9%, p = 0.02) as compared to those who did not consider health education held by peers as a reliable source. The majority of respondents obtained knowledge about sexual issues from the mass media. Young people who considered health educating programs reliable were significantly better informed about Candida disease.

  5. Modelling Facebook Usage among University Students in Thailand: The Role of Emotional Attachment in an Extended Technology Acceptance Model

    Science.gov (United States)

    Teo, Timothy

    2016-01-01

    The aim of this study is to examine the factors that influenced the use of Facebook among university students. Using an extended technology acceptance model (TAM) with emotional attachment (EA) as an external variable, a sample of 498 students from a public-funded Thailand university were surveyed on their responses to five variables hypothesized…

  6. Validity and reliability of the Multidimensional Body Image Scale in Malaysian university students.

    Science.gov (United States)

    Gan, W Y; Mohd, Nasir M T; Siti, Aishah H; Zalilah, M S

    2012-12-01

    This study aimed to evaluate the validity and reliability of the Multidimensional Body Image Scale (MBIS), a seven-factor, 62-item scale developed for Malaysian female adolescents. This scale was evaluated among male and female Malaysian university students. A total of 671 university students (52.2% women and 47.8% men) completed a self-administered questionnaire on MBIS, Eating Attitude Test-26, and Rosenberg Self-Esteem Scale. Their height and weight were measured. Results in confirmatory factor analysis showed that the 62-item MBIS reported poor fit to the data, xhi2/df = 4.126, p self-esteem. Also, this scale discriminated well between participants with and without disordered eating. The MBIS-46 demonstrated good reliability and validity for the evaluation of body image among university students. Further studies need to be conducted to confirm the validation results of the 46-item MBIS.

  7. A Conceptual Model of Technology and E-services Acceptance among Universities\\\\\\' Students (Case Study: Ferdowsi University of Mashhad

    Directory of Open Access Journals (Sweden)

    Shamsodin Nazemi

    2012-12-01

    Full Text Available : In spite of increasing interests and trends among Iranian organizations to incorporate information and communication technology (ICT into service provision to their customers, there is still considerable gap between existing and expected diffusion. The aim of this study was to identify and evaluate main determinants of technology adoption and use on the basis of modified TAM model. The developed model was validated through survey research and data collected from a randomly selected sample of 263 students at Ferdowsi University of Mashhad. Data analysis was conducted using appropriate statistical techniques including regression, and Chaves analysis. The findings of research confirmed the validity of principle model , confirming ease of use and perceived usefulness as main determinants of technology acceptance as suggested by Davis. This study also suggested that the quality of system and personal ability to use technology were good predictors of ease of use, while social interaction and images appeared to be good predictors of perceived usefulness of technology. Furthermore, personal innovativeness proved to have significant effect on intention to use among potential ICT users.

  8. A human reliability analysis of the University of New Mexico's AGN- 201M nuclear research reactor

    International Nuclear Information System (INIS)

    Brumburgh, G.P.; Heger, A.S.

    1992-01-01

    During 1990--1991, a probabilistic risk assessment was conducted on the University of New Mexico's AGN-201M nuclear research reactor to address the risk and consequence of a maximum hypothetical release accident. The assessment indicated a potential for consequential human error to precipitate Chis scenario. Subsequently, a human reliability analysis was performed to evaluate the significance of human interaction on the reactor's safety systems. This paper presents the results of that investigation

  9. Hybrid Structural Reliability Analysis under Multisource Uncertainties Based on Universal Grey Numbers

    Directory of Open Access Journals (Sweden)

    Xingfa Yang

    2018-01-01

    Full Text Available Nondeterministic parameters of certain distribution are employed to model structural uncertainties, which are usually assumed as stochastic factors. However, model parameters may not be precisely represented due to some factors in engineering practices, such as lack of sufficient data, data with fuzziness, and unknown-but-bounded conditions. To this end, interval and fuzzy parameters are implemented and an efficient approach to structural reliability analysis with random-interval-fuzzy hybrid parameters is proposed in this study. Fuzzy parameters are first converted to equivalent random ones based on the equal entropy principle. 3σ criterion is then employed to transform the equivalent random and the original random parameters to interval variables. In doing this, the hybrid reliability problem is transformed into the one only with interval variables, in other words, nonprobabilistic reliability analysis problem. Nevertheless, the problem of interval extension existed in interval arithmetic, especially for the nonlinear systems. Therefore, universal grey mathematics, which can tackle the issue of interval extension, is employed to solve the nonprobabilistic reliability analysis problem. The results show that the proposed method can obtain more conservative results of the hybrid structural reliability.

  10. Acceptability of Male Circumcision among College Students in Medical Universities in Western China: A Cross-Sectional Study.

    Directory of Open Access Journals (Sweden)

    Junjun Jiang

    Full Text Available Male circumcision (MC has been shown to reduce the risk of female to male transmission of HIV. The goal of this survey was to explore MC's acceptability and the factors associated with MC among college students in medical universities in western China.A cross-sectional study was carried out in three provinces in western China (Guangxi, Chongqing and Xinjiang to assess the acceptability of MC as well as to discover factors associated with the acceptability among college students in medical universities. A total of 1,790 uncircumcised male students from three medical universities were enrolled in this study. In addition, 150 students who had undergone MC were also enrolled in the survey, and they participated in in-depth interviews.Of all the uncircumcised participants (n = 1,790, 55.2% (n = 988 were willing to accept MC. Among those who accepted MC, 67.3% thought that MC could improve their sexual partners' hygiene, 46.3% believed that HIV and sexually transmitted diseases (STDs could be partially prevented by MC. The multivariable logistic regression indicates that MC's acceptability was associated with three factors: the redundant foreskin (OR = 10.171, 95% CI = 7.629-13.559, knowing the hazard of having a redundant foreskin (OR = 1.597, 95% CI = 1.097-2.323, and enhancing sexual pleasure (OR = 1.628, 95% CI = 1.312-2.021. The in-depth interviews for subjects who had undergone MC showed that the major reason for having MC was the redundant foreskin (87.3%, followed by the benefits and the fewer complications of having MC done. In addition, most of these participants (65.3% said that the MC could enhance sexual satisfaction.MC's acceptance among college students in medical universities is higher than it is among other populations in western China. An implementation of an MC programme among this population is feasible in the future.

  11. Several submaximal exercise tests are reliable, valid and acceptable in people with chronic pain, fibromyalgia or chronic fatigue: a systematic review

    NARCIS (Netherlands)

    Ratter, Julia; Radlinger, Lorenz; Lucas, Cees

    2014-01-01

    Are submaximal and maximal exercise tests reliable, valid and acceptable in people with chronic pain, fibromyalgia and fatigue disorders? Systematic review of studies of the psychometric properties of exercise tests. People older than 18 years with chronic pain, fibromyalgia and chronic fatigue

  12. Acceptance and use of e-learning systems by undergraduate students of Ecuador: The case of a state university

    Directory of Open Access Journals (Sweden)

    Richard Ramirez-Anormaliza

    2017-07-01

    Originality/value: This paper presents empirical data on the use and acceptance of e-learning systems for undergraduate students of a particular university in Ecuador. No similar studies are evident in the country and the model can be considered for future studies of national scope.

  13. Mobile technologies: expectancy, usage, and acceptance of clinical staff and patients at a university medical center.

    Science.gov (United States)

    Illiger, Kristin; Hupka, Markus; von Jan, Ute; Wichelhaus, Daniel; Albrecht, Urs-Vito

    2014-10-21

    Despite their increasing popularity, little is known about how users perceive mobile devices such as smartphones and tablet PCs in medical contexts. Available studies are often restricted to evaluating the success of specific interventions and do not adequately cover the users' basic attitudes, for example, their expectations or concerns toward using mobile devices in medical settings. The objective of the study was to obtain a comprehensive picture, both from the perspective of the patients, as well as the doctors, regarding the use and acceptance of mobile devices within medical contexts in general well as the perceived challenges when introducing the technology. Doctors working at Hannover Medical School (206/1151, response 17.90%), as well as patients being admitted to this facility (213/279, utilization 76.3%) were surveyed about their acceptance and use of mobile devices in medical settings. Regarding demographics, both samples were representative of the respective study population. GNU R (version 3.1.1) was used for statistical testing. Fisher's exact test, two-sided, alpha=.05 with Monte Carlo approximation, 2000 replicates, was applied to determine dependencies between two variables. The majority of participants already own mobile devices (doctors, 168/206, 81.6%; patients, 110/213, 51.6%). For doctors, use in a professional context does not depend on age (P=.66), professional experience (P=.80), or function (P=.34); gender was a factor (P=.009), and use was more common among male (61/135, 45.2%) than female doctors (17/67, 25%). A correlation between use of mobile devices and age (P=.001) as well as education (P=.002) was seen for patients. Minor differences regarding how mobile devices are perceived in sensitive medical contexts mostly relate to data security, patients are more critical of the devices being used for storing and processing patient data; every fifth patient opposed this, but nevertheless, 4.8% of doctors (10/206) use their devices for this

  14. Students' Acceptance of an Educational Videos Platform: A Study in A Portuguese University

    Science.gov (United States)

    Costa, Carolina; Alvelos, Helena; Teixeira, Leonor

    2018-01-01

    The Educast is an educational videos' platform that captures simultaneously video and digital support materials. This paper presents a study on the acceptance of Educast, by students, using the Technology Acceptance Model--TAM. The data was collected through a questionnaire applied to 54 students which results were analyzed using descriptive…

  15. Reliability and validity of the Positive Mental Health Questionnaire in a sample of Spanish university students.

    Science.gov (United States)

    Roldán-Merino, J; Lluch-Canut, M T; Casas, I; Sanromà-Ortíz, M; Ferré-Grau, C; Sequeira, C; Falcó-Pegueroles, A; Soares, D; Puig-Llobet, M

    2017-03-01

    WHAT IS KNOWN ON THE SUBJECT?: In general, the current studies of positive mental health use questionnaires or parts thereof. However, while these questionnaires evaluate aspects of positive mental health, they fail to measure the construct itself. WHAT DOES THIS PAPER ADD TO EXISTING KNOWLEDGE?: The widespread use and the lack of specific questionnaires for evaluating the positive mental health construct justify the need to measure the robustness of the Positive Mental Health Questionnaire. Also six factors are proposed to measure positive mental health. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: The availability of a good questionnaire to measure positive mental health in university students is useful not only to promote mental health but also to strengthen the curricula of future professionals. Introduction Nursing has a relevant role in managing mental health. It is important to identify and thereafter to enhance positive aspects of mental health among university nursing students. Aim The aim of the present study was to analyse the psychometric properties of the Positive Mental Health Questionnaire (PMHQ) in terms of reliability and validity using confirmatory factor analysis in a sample of university students. Method A cross-sectional study was carried out in a sample of 1091 students at 4 nursing schools in Catalonia, Spain. The reliability of the PMHQ was measured by means of Cronbach's alpha coefficient, and the test-retest stability was measured with the intraclass correlation coefficient (ICC). Confirmatory factor analysis was used to determine the validity of the factorial structure. Results Cronbach's alpha coefficient was satisfactory (>0.70) for four of the six subscales or dimensions and ranged from 0.54 to 0.79. ICC analysis was satisfactory for the six subscales or dimensions. The hypothesis was confirmed in the analysis of the correlations between subclasses and the overall scale, with the strongest correlations being found between the majority of

  16. A comparison of three Open Universities and their acceptance of Internet Technologies

    OpenAIRE

    Jones, Chris; Aoki, Kumiko; Rusman, Ellen; Schlusmans, Kathleen

    2009-01-01

    We compare three open universities the Open Universities in the UK (OUUK), the Netherlands (OUNL) and Japan (OUJ). Originating in the modern idea of an Open University each university has developed its own pedagogical model. The OUUK developed Supported Open Learning based on: 1. Distance open learning: allowing ‘learning in your own time’ working on set activities and assignments. 2. Quality resources: printed materials, set books, audio and video and home experiments. 3. Systematic support:...

  17. University Students' Behavioral Intention to Use Mobile Learning: Evaluating the Technology Acceptance Model

    Science.gov (United States)

    Park, Sung Youl; Nam, Min-Woo; Cha, Seung-Bong

    2012-01-01

    As many Korean universities have recommended the implementation of mobile learning (m-learning) for various reasons, the number of such tertiary learning opportunities has steadily grown. However, little research has investigated the factors affecting university students' adoption and use of m-learning. A sample of 288 Konkuk university students…

  18. A universal and reliable assay for molecular sex identification of three-spined sticklebacks (Gasterosteus aculeatus).

    Science.gov (United States)

    Toli, E-A; Calboli, F C F; Shikano, T; Merilä, J

    2016-11-01

    In heterogametic species, biological differences between the two sexes are ubiquitous, and hence, errors in sex identification can be a significant source of noise and bias in studies where sex-related sources of variation are of interest or need to be controlled for. We developed and validated a universal multimarker assay for reliable sex identification of three-spined sticklebacks (Gasterosteus aculeatus). The assay makes use of genotype scores from three sex-linked loci and utilizes Bayesian probabilistic inference to identify sex of the genotyped individuals. The results, validated with 286 phenotypically sexed individuals from six populations of sticklebacks representing all major genetic lineages (cf. Pacific, Atlantic and Japan Sea), indicate that in contrast to commonly used single-marker-based sex identification assays, the developed multimarker assay should be 100% accurate. As the markers in the assay can be scored from agarose gels, it provides a quick and cost-efficient tool for universal sex identification of three-spined sticklebacks. The general principle of combining information from multiple markers to improve the reliability of sex identification is transferable and can be utilized to develop and validate similar assays for other species. © 2016 John Wiley & Sons Ltd.

  19. Validity and Reliability of the Alcohol, Smoking, and Substance Involvement Screening Test (ASSIST) in University Students.

    Science.gov (United States)

    Tiburcio Sainz, Marcela; Rosete-Mohedano, Ma Guadalupe; Natera Rey, Guillermina; Martínez Vélez, Nora Angélica; Carreño García, Silvia; Pérez Cisneros, Daniel

    2016-03-02

    The Alcohol, Smoking and Substance Involvement Screening Test (ASSIST), developed by the World Health Organization (WHO), has been used successfully in many countries, but there are few studies of its validity and reliability for the Mexican population. The objective of this study was to determine the psychometric properties of the self-administered ASSIST test in university students in Mexico. This was an ex post facto non-experimental study with 1,176 undergraduate students, the majority women (70.1%) aged 18-23 years (89.5%) and single (87.5%). To estimate concurrent validity, factor analysis and tests of reliability and correlation were carried out between the subscale for alcohol and AUDIT, those for tobacco and the Fagerström Test, and those for marijuana and DAST-20. Adequate reliability coefficients were obtained for ASSIST subscales for tobacco (alpha = 0.83), alcohol (alpha = 0.76), and marijuana (alpha = 0.73). Significant correlations were found only with the AUDIT (r = 0.71) and the alcohol subscale. The best balance of sensitivity and specificity of the alcohol subscale (83.8% and 80%, respectively) and the largest area under the ROC curve (81.9%) was found with a cutoff score of 8. The self-administered version of ASSIST is a valid screening instrument to identify at-risk cases due to substance use in this population.

  20. A Study of the Readiness of Hospitals for Implementation of High Reliability Organizations Model in Tehran University of Medical Sciences.

    Science.gov (United States)

    Mousavi, Seyed Mohammad Hadi; Dargahi, Hossein; Mohammadi, Sara

    2016-10-01

    Creating a safe of health care system requires the establishment of High Reliability Organizations (HROs), which reduces errors, and increases the level of safety in hospitals. This model focuses on improving reliability through higher process design, building a culture of accreditation, and leveraging human factors. The present study intends to determine the readiness of hospitals for the establishment of HROs model in Tehran University of Medical Sciences from the viewpoint of managers of these hospitals. This is a descriptive-analytical study carried out in 2013-2014. The research population consists of 105 senior and middle managers of 15 hospitals of Tehran University of Medical Sciences. The data collection tool was a 55-question researcher-made questionnaire, included six elements of HROs to assess the level of readiness for establishing HROS model from managers' point of view. The validity of the questionnaire was calculated through the content validity method using 10 experts in the area of hospitals' accreditation, and its reliability was calculated through test-retest method with a correlation coefficient of 0.90. The response rate was 90 percent. The Likert scale was used for the questions, and data analysis was conducted through SPSS version 21 Descriptive statistics was presented via tables and normal distributions of data and means. Analytical methods, including t-test, Mann-Whitney, Spearman, and Kruskal-Wallis, were used for presenting inferential statistics. The study showed that from the viewpoint of senior and middle managers of the hospitals considered in this study, these hospitals are indeed ready for acceptance and establishment of HROs model. A significant relationship was showed between HROs model and its elements with demographic details of managers like their age, work experience, management experience, and level of management. Although the studied hospitals, as viewed by their managers, are capable of attaining the goals of HROs, it

  1. Turkish version of the Intuitive Eating Scale-2: Validity and reliability among university students.

    Science.gov (United States)

    Bas, Murat; Karaca, Kezban Esen; Saglam, Duygu; Arıtıcı, Gozde; Cengiz, Ecem; Köksal, Selen; Buyukkaragoz, Aylin Hasbay

    2017-07-01

    Intuitive Eating is defined as "the dynamic process-integrating attunement of mind, body, and food". The purpose of this study was, therefore, adapt the IES-2 to the Turkish language and reliability and validity of IES-2 among Turkish populations. We also examined the instrument's internal consistency and test-retest reliability and analysed the relationships between the IES-2 and several variables so as to evaluate the convergent and discriminant validity. Three hundred seventy-seven undergraduate and postgraduate women and men between the ages of 19-31 years (mean 22.3, SD = 3.53) attending two large private universities in Istanbul, Turkey. The best solution from the principal factors analysis of the 23 items of the IES-2 revealed four factors corresponding to the four subscales (F1: Eating for physical rather than emotional reasons; F2: Unconditional permission to eat; F3: Reliance on hunger and satiety cues; F4: Body-food choice congruence), as reported by the authors of the questionnaire. Bartlett's test of sphericity gave X 2  = 9043.49 (p Kaiser-Meyer-Olkin index was 0.87 (KMO were 0.89 for women and 0.83 for men). The test-retest reliability of the IES-2 was 0.88 for the IES-2 total score. The IES-2 had a = 0.82. These findings support the notion that intuitive eating is a viable concept for university students and the IES can be used to examine adaptive eating behaviors in this population. Copyright © 2017. Published by Elsevier Ltd.

  2. Several submaximal exercise tests are reliable, valid and acceptable in people with chronic pain, fibromyalgia or chronic fatigue: a systematic review

    OpenAIRE

    Julia Ratter; Lorenz Radlinger; Cees Lucas

    2014-01-01

    Question: Are submaximal and maximal exercise tests reliable, valid and acceptable in people with chronic pain, fibromyalgia and fatigue disorders? Design: Systematic review of studies of the psychometric properties of exercise tests. Participants: People older than 18 years with chronic pain, fibromyalgia and chronic fatigue disorders. Intervention: Studies of the measurement properties of tests of physical capacity in people with chronic pain, fibromyalgia or chronic fatigue disorders were ...

  3. Knowledge of Saudi female university students regarding cervical cancer and acceptance of the human papilloma virus vaccine

    OpenAIRE

    Al-Shaikh, Ghadeer K.; Almussaed, Eman M.; Fayed, Amel A.; Khan, Farida H.; Syed, Sadiqa B.; Al-Tamimi, Tahani N.; Elmorshedy, Hala N.

    2014-01-01

    Objectives: To assess the level of knowledge regarding cervical cancer and the acceptance of the human papilloma virus (HPV) vaccine among Saudi female students in health colleges. Methods: This cross-sectional study of a convenient sample encompassed 1400 students in Health Colleges at Princess Nora Bint Abdul Rahman University, Riyadh, Saudi Arabia was conducted between December 2013 and February 2014. A self-administrated questionnaire was distributed to all participants. Data collected in...

  4. Several submaximal exercise tests are reliable, valid and acceptable in people with chronic pain, fibromyalgia or chronic fatigue: a systematic review.

    Science.gov (United States)

    Ratter, Julia; Radlinger, Lorenz; Lucas, Cees

    2014-09-01

    Are submaximal and maximal exercise tests reliable, valid and acceptable in people with chronic pain, fibromyalgia and fatigue disorders? Systematic review of studies of the psychometric properties of exercise tests. People older than 18 years with chronic pain, fibromyalgia and chronic fatigue disorders. Studies of the measurement properties of tests of physical capacity in people with chronic pain, fibromyalgia or chronic fatigue disorders were included. Studies were required to report: reliability coefficients (intraclass correlation coefficient, alpha reliability coefficient, limits of agreements and Bland-Altman plots); validity coefficients (intraclass correlation coefficient, Spearman's correlation, Kendal T coefficient, Pearson's correlation); or dropout rates. Fourteen studies were eligible: none had low risk of bias, 10 had unclear risk of bias and four had high risk of bias. The included studies evaluated: Åstrand test; modified Åstrand test; Lean body mass-based Åstrand test; submaximal bicycle ergometer test following another protocol other than Åstrand test; 2-km walk test; 5-minute, 6-minute and 10-minute walk tests; shuttle walk test; and modified symptom-limited Bruce treadmill test. None of the studies assessed maximal exercise tests. Where they had been tested, reliability and validity were generally high. Dropout rates were generally acceptable. The 2-km walk test was not recommended in fibromyalgia. Moderate evidence was found for reliability, validity and acceptability of submaximal exercise tests in patients with chronic pain, fibromyalgia or chronic fatigue. There is no evidence about maximal exercise tests in patients with chronic pain, fibromyalgia and chronic fatigue. Copyright © 2014. Published by Elsevier B.V.

  5. Experiences of Gender-Based Violence at a South African University: Prevalence and Effect on Rape Myth Acceptance.

    Science.gov (United States)

    Finchilescu, Gillian; Dugard, Jackie

    2018-04-01

    Instances of gender-based violence (GBV) on university campuses are rarely reported to the authorities. This makes it difficult to gauge the prevalence of this problem, which in turn affects efforts for prevention. This article describes a university-wide online survey aimed at assessing, first, the prevalence of GBV experienced by the three sectors in the community-students, academic and research staff, and professional/administrative staff. Many of the findings concurred with research elsewhere-students were the predominant victims of GBV; men were the main perpetrators; and instances of rape occurred mainly when the victim/survivor was under the influence of alcohol or drugs. In contrast to some of the more well-known U.S. surveys (e.g., Georgetown University), we found relatively few instances of students being exploited by staff members. Occurrences of contrapower harassment were also reported in our survey. The second aim investigated whether rape myth acceptance was related to experiences of GBV. We found that women who had these experiences were more rejecting of rape myths than women who had not had such experiences. The opposite was found for White men. White men who had experienced GBV were more accepting of the rape myths than those who had not had such experiences. It was suggested that this reflected a need for these male victims to establish their hegemonic masculine identity. In general, the level of rape myth acceptance was relatively low. This suggested that widespread victim-blame, and self-blame does not account for the low levels of GBV reports to officials. A limitation of the study was the relatively low response rate (1,350 respondents), which was likely caused by the student protests over university fees that were ongoing at the time of the survey. These protests caused considerable disturbance for all sectors of the university community.

  6. Psychometric Evaluation of the Work Acceptance and Action Questionnaire of Psychological Flexibility Modified for University Students

    Science.gov (United States)

    Lang, Brent; Rosenberg, Harold; Lauritsen, Kirstin; Davis, Alan K.; Cross, Nicole

    2017-01-01

    According to Acceptance and Commitment Therapy (ACT), "psychological flexibility" refers to an individual's ability to maintain mindful awareness of his or her thoughts and emotions in the present moment while behaving according to his or her personal values. Psychological inflexibility could set the foundation for emotional distress and…

  7. An Investigation of University Student Readiness Towards M-Learning Using Technology Acceptance Model

    Science.gov (United States)

    Iqbal, Shakeel; Bhatti, Zeeshan Ahmed

    2015-01-01

    M-learning is learning delivered via mobile devices and mobile technology. The research indicates that this medium of learning has potential to enhance formal as well as informal learning. However, acceptance of m-learning greatly depends upon the personal attitude of students towards this medium; therefore this study focuses only on the…

  8. Based on acceptance and commitment therapy on social anxiety symptoms and quality of life Chamran University students

    Directory of Open Access Journals (Sweden)

    Farokh Hasheminiya

    2016-07-01

    Full Text Available The aim of this study was to determine the effectiveness of acceptance and commitment therapy on social anxiety symptoms and quality of life Chamran University Dormitory. From among female students living in dormitories martyr Chamran University, through the call, and after the implementation of the social anxiety questionnaire, a total of 30 people with the highest social anxiety score Bund, were selected randomly to participate in the study. Method of this quasi experimental study was from type of pre- and post-test with the control group. So that the qualified students, after the initial interview were randomly assigned to two experimental and control groups. Participants in both groups of social anxiety and quality of life questionnaire in the pre-test, post-test and follow-up was 1.5 months completed. The experimental group received 10 sessions of treatment based on acceptance and commitment. The results of multivariate analysis of covariance (MANCOVA suggests that this treatment reduces social anxiety (F = 18,47, p = 0/001 and improved quality of life (F = 13,46, p = 0/04 in experimental group compared with the control group in the post-test and procedures were followed. Research results show that based on acceptance and commitment therapy a good way to reduce social anxiety and improve the quality of life.

  9. Integrative assessment of Evolutionary theory acceptance and knowledge levels of Biology undergraduate students from a Brazilian university

    Science.gov (United States)

    Tavares, Gustavo Medina; Bobrowski, Vera Lucia

    2018-03-01

    The integrative role that Evolutionary theory plays within Biology is recognised by most scientific authors, as well as in governmental education policies, including Brazilian policies. However, teaching and learning evolution seems problematic in many countries, and Brazil is among those. Many factors may affect teachers' and students' perceptions towards evolution, and studies can help to reveal those factors. We used a conceptual questionnaire, the Measure of Acceptance of the Theory of Evolution (MATE) instrument, and a Knowledge test to assess (1) the level of acceptance and understanding of 23 undergraduate Biology students nearing the end of their course, (2) other factors that could affect these levels, including course structure, and (3) the most difficult topics regarding evolutionary biology. The results of this study showed that the students, on average, had a 'Very High Acceptance' (89.91) and a 'Very Low Knowledge' (59.42%) of Evolutionary theory, and also indicated a moderate positive correlation between the two (r = 0.66, p = .001). The most difficult topics were related to the definition of evolution and dating techniques. We believe that the present study provides evidence for policymakers to reformulate current school and university curricula in order to improve the teachers' acceptance and understanding of evolution and other biological concepts, consequently, helping students reduce their misconceptions related to evolutionary biology.

  10. Acceptability, reliability, and validity of the Stroke and Aphasia Quality of Life Scale-39 (SAQOL-39) across languages: a systematic review.

    Science.gov (United States)

    Ahmadi, Akram; Tohidast, Seyed Abolfazl; Mansuri, Banafshe; Kamali, Mohammad; Krishnan, Gopee

    2017-09-01

    This systematic review aimed to explore the acceptability, reliability, and validity of the Stroke and Aphasia Quality of Life-39 (SAQOL-39) scale across languages. We employed a systematic search of the online databases including MEDLINE (Pubmed), Science direct, Web of science, Psychinfo, Scopus, ProQuest, Google Scholar, and Cochrane library published between 2003 and 2016. We used PRISMA guidelines for conducting and reporting this review. Subsequently, screening of the titles and abstracts, extraction of data as well as the appraisal of the quality of relevant studies were carried out. The initial search returned 8185 studies. Subsequent screening and study selection processes narrowed them to 20, needing detailed review. Forward-backward translation scheme was the preferred method for translation of the SAQOL-39 from English to other languages. Mainly, the socio-cultural and linguistic adaptations were performed in the translated versions. Most versions of the SAQOL-39 showed high test-retest reliability and internal consistency. However, several psychometric properties including the validity and responsiveness were seldom reported in these versions. The SAQOL-39 scale showed high acceptability, and reliability across the languages reviewed in this study. Future translations may additionally focus on reporting the validity and responsiveness of the instrument.

  11. The Acceptance of Universalism: The Importance of Selected Aspects of School Structure.

    Science.gov (United States)

    Martin, Robert A.

    This report describes a study that investigated empirically the relationships between selected aspects of the organizational structure of elementary schools and the extent to which students endorsed the norm of universalism. Four aspects of structure were studied: degree of departmentalization, school enrollment, student-teacher ratio, and extent…

  12. Tiger Teams Technical Assistance: Reliable, Universal Open Architecture for Card Access to Dispense Alternative Fuels

    Energy Technology Data Exchange (ETDEWEB)

    2002-03-01

    Report discusses the dilemma of incorporating consistent, convenient, universal card access (or ''pay-at-the-pump'') systems into alternative fueling stations across the country. The state of California continues to be in the forefront of implementing alternative fuels for transportation applications. Aggressive efforts to deploy alternative fuel vehicles (AFVs) in California have highlighted the need to provide adequate fueling stations and develop appropriate, user-friendly means to purchase fuel at the pump. Since these fuels are not typically provided by petroleum companies at conventional fueling stations, and acceptance of cash is often not an option, a payment method must be developed that is consistent with the way individual AFV operators are accustomed to purchasing automotive fuels--with a credit card. At the same time, large fleets like the California Department of General Services must be able to use a single fuel card that offers comprehensive fleet management services. The Gas Technology Institute's Infrastructure Working Group (IWG) and its stakeholders have identified the lack of a common card reader system as a hurdle to wider deployment of AFVs in California and the United States. In conjunction with the U.S. Department of Energy's (DOE) National Clean Cities Program, the IWG has outlined a multi-phased strategy to systematically address the barriers to develop a more ''open'' architecture that's similar to the way gasoline and diesel are currently dispensed. Under the auspices of the IWG, survey results were gathered (circa 1999) from certain fuel providers, as a means to more carefully study card reader issues and their potential solutions. Pilot programs featuring card reader systems capable of accepting wider payment options have been attempted in several regions of the United States with mixed success. In early 2001, DOE joined the National Renewable Energy Laboratory (NREL), the

  13. [Validity, reliability, and acceptability of the brief version of the self-management knowledge, attitude, and behavior assessment scale for diabetes patients].

    Science.gov (United States)

    Wu, Y Z; Wang, W J; Feng, N P; Chen, B; Li, G C; Liu, J W; Liu, H L; Yang, Y Y

    2016-07-06

    To evaluate the validity, reliability, and acceptability of the brief version of the self-management knowledge, attitude, and behavior (KAB) assessment scale for diabetes patients. Diabetes patients who were managed at the Xinkaipu Community Health Service Center of Tianxin in Changsha, Hunan Province were selected for survey by cluster sampling. A total of 350 diabetes patients were surveyed using the brief scale to collect data on knowledge, attitudes, and behaviors of self-management. Content validity was evaluated by Pearson correlation coefficient between the brief scale and subscales of knowledge, attitude, and behavior. Structure validity was evaluated by factor analysis, and discrimination validity was evaluated by an independent sample t-test between the high-score and low-score groups. Reliability was tested by internal consistency reliability and split-half reliability. The evaluation indexes of internal consistency reliability were Cronbach's α coefficients, θ coefficient, and Ω coefficient. Acceptability was evaluated by valid response rate and completion time of the brief scale. A total of 346(98.9%) valid questionnaires were returned, with average survey time of (11.43±3.4) minutes. Average score of the brief scale was 78.85 ± 11.22; scores of the knowledge, attitude, and behavior subscales were 16.45 ± 4.42, 21.33 ± 2.03, and 41.07 ± 8.34, respectively. Pearson correlation coefficients between the brief scale and the knowledge, attitude, and behavior subscales were 0.92, 0.42, and 0.60, respectively; P-values were all less than 0.01, indicating that the face validity and content validity of the brief scale were achieved to a good level. The common factor cumulative variance contribution rate of the brief scale and three subscales was from 53.66% to 61.75%, which achieved more than 50% of the approved standard. There were 11 common factors; 41 of the total 42 items had factor loadings above 0.40 in their relevant common factor, indicating

  14. THE ACCEPTANCE OF SUSTAINABLE FOOD CONCEPT: A QUALITATIVE EXPLORATION IN STENDEN UNIVERSITY HOTEL, THE NETHERLANDS

    Directory of Open Access Journals (Sweden)

    Sia Tjun Han

    2017-09-01

    Full Text Available As customers concern more about the environment, sustainable food demands, which are locally produced, organic, seasonal, and vegetarian or semi-vegetarian, are increasing. Besides, Theory of Planned Behavior (TPB explains that behavior is guided by intentions with the factors of attitude, subjective norm, and perceived behavioral control to predict food choices; food purchasing habits and intake; and attitudes and preferences. Therefore, the research purpose is to examine customers’ acceptance of The Netherlands restaurant implementing sustainable food concept using TPB. Data analysis of 10 semi structured interviews shows that the customers of Restaurant NL are more likely guided by external factors of subjective norms: work related dine-in; others’ encouragement to eat more healthy and more responsibly, as the intentions are to have sustainable benefits.

  15. Acceptance analysis of a digital picture distribution in a filmless university hospital

    International Nuclear Information System (INIS)

    Fruend, R.; Feuerbach, S.; Jaehnig, V.; Strotzer, M.; Voelk, M.

    2007-01-01

    Purpose: A prospective evaluation before and after the introduction of PACS should evaluate the level of acceptance by the referring physicians and indicate possible weaknesses. Materials and Methods: In a hospital with 816 beds, questionnaires were sent to all referring physicians before and after the introduction of PACS to inquire how the physicians deal with radiological images. Results: Without PACS, 62% of the referring physicians spent up to one hour per day searching for radiological images. With PACS, 52% needed less time to find the correct images. 63% believe that the radiological image demonstration is more informative due to PACS. The possibility to view radiological images was criticized by 29% of the referring physicians at the ambulatory units and 34% at the wards. Before PACS, the service of the department of radiology was considered to be very good by 20% of the physicians. After PACS, this value increased to 31%. 93% of the physicians questioned would recommend the introduction of PACS to other hospitals. (orig.)

  16. Validity, Reliability, and Potential Bias of Short Forms of Students' Evaluation of Teaching: The Case of UAE University

    Science.gov (United States)

    Dodeen, Hamzeh

    2013-01-01

    Students' opinions continue to be a significant factor in the evaluation of teaching in higher education institutions. The purpose of this study was to psychometrically assess short students evaluation of teaching (SET) forms using the UAE University form as a model. The study evaluated the form validity, reliability, the overall question, and…

  17. Human decomposition and the reliability of a 'Universal' model for post mortem interval estimations.

    Science.gov (United States)

    Cockle, Diane L; Bell, Lynne S

    2015-08-01

    Human decomposition is a complex biological process driven by an array of variables which are not clearly understood. The medico-legal community have long been searching for a reliable method to establish the post-mortem interval (PMI) for those whose deaths have either been hidden, or gone un-noticed. To date, attempts to develop a PMI estimation method based on the state of the body either at the scene or at autopsy have been unsuccessful. One recent study has proposed that two simple formulae, based on the level of decomposition humidity and temperature, could be used to accurately calculate the PMI for bodies outside, on or under the surface worldwide. This study attempted to validate 'Formula I' [1] (for bodies on the surface) using 42 Canadian cases with known PMIs. The results indicated that bodies exposed to warm temperatures consistently overestimated the known PMI by a large and inconsistent margin for Formula I estimations. And for bodies exposed to cold and freezing temperatures (less than 4°C), then the PMI was dramatically under estimated. The ability of 'Formulae II' to estimate the PMI for buried bodies was also examined using a set of 22 known Canadian burial cases. As these cases used in this study are retrospective, some of the data needed for Formula II was not available. The 4.6 value used in Formula II to represent the standard ratio of time that burial decelerates the rate of decomposition was examined. The average time taken to achieve each stage of decomposition both on, and under the surface was compared for the 118 known cases. It was found that the rate of decomposition was not consistent throughout all stages of decomposition. The rates of autolysis above and below the ground were equivalent with the buried cases staying in a state of putrefaction for a prolonged period of time. It is suggested that differences in temperature extremes and humidity levels between geographic regions may make it impractical to apply formulas developed in

  18. reliability reliability

    African Journals Online (AJOL)

    eobe

    Corresponding author, Tel: +234-703. RELIABILITY .... V , , given by the code of practice. However, checks must .... an optimization procedure over the failure domain F corresponding .... of Concrete Members based on Utility Theory,. Technical ...

  19. Do hospital physicians really want to go digital? Acceptance of a picture archiving and communication system in a university hospital

    International Nuclear Information System (INIS)

    Duyck, P.; Pynoo, B.; Devolder, P.; Voet, T.; Adang, L.; Vercruysse, J.

    2008-01-01

    Purpose: radiology departments are making the transition from analog film to digital images by means of PACS (Picture Archiving and Communication System). It is critical for the hospital that its physicians adopt and accept the new digital work method regarding radiological information. The aim of this study is to investigate hospital physicians' acceptance of PACS using questionnaires pre- and post-implementation and to identify main influencing factors. Materials and methods: the study was conducted in an 1169 bed university hospital. The UTAUT (Unified Theory of Acceptance and Use of Technology) questionnaire was administered at two times: one month pre-implementation (T1) and 1.5 years post-implementation (T2) of PACS, targeting all hospital physicians with the exemption of radiologists. The UTAUT scales (Behavioral Intention BI; Facilitating Conditions FC; Effort Expectancy EE; Performance Expectancy PE; Anxiety ANX; Social Influence SI; System Use USE; Attitude toward technology ATT; Self-Efficacy SE) were used to assess questions regarding: (a) PACS' usefulness, (b) PACS' ease of learning/using, (c) PACS support availability, (d) the perceived pressure to use PACS, (e) physicians' attitude towards PACS and (f) physicians' intention to use and actual use of PACS. Results: at T1 scale ratings were positive toward the PACS implementation. The ratings on all scales with the exception of self-efficacy improved at T2. Regression analysis revealed that the key factor for intention to use PACS at T1 was the usefulness of PACS, while the availability and awareness of support was its most important predictor at T2. Overall, PE was the best predictor of BI, but all four UTAUT-determinants (PE, FC, EE and SI) were salient for its prediction. Variance explained in BI ranged from 31 to 37% while variance explained in USE was very low (3%). (orig.)

  20. Awareness, acceptability, and use of female condoms among university students in Nigeria: implications for STI/HIV prevention.

    Science.gov (United States)

    Tobin-West, Charles I; Maduka, Omosivie; Onyekwere, Victor N; Tella, Adedayo O

    2014-01-01

    Most university students in Nigeria are sexually active and engage in high risk sexual behaviors. The aim of this study was to assess the acceptability and use of female condoms in the context of HIV prevention in order to provide basic information that can stimulate female condom programming to promote sexually transmitted infection and HIV prevention among youths in tertiary institutions. A descriptive, cross-sectional study was carried out among 810 undergraduate students of the University of Port Harcourt from October to November 2011, using a stratified sampling method and self-administered questionnaires. Most of the students, 589 (72.7%) were sexually active; 352 (59.7%) reported having just one sexual partner, while 237 (40.3%) had multiple partners. The mean number of sexual partners in the past six months was 2.2 ± 0. Consistent condom use was reported among 388 (79.2%) students, 102 (20.8%) reported occasional usage, while 99 (16.8%) did not use condoms at all. Only 384 (65.2%) of the students had ever been screened for HIV. Although 723 (89.3%) were aware of female condoms, only 64(8.9%) had ever used one due to unavailability, high cost, and difficulty with its insertion. Nevertheless, 389 (53.8%) of the students expressed willingness to use them if offered, while 502 (69.4%) would recommend it to friends/peers. This study highlights significant challenges in the use of female condoms among university students. These include unavailability, high cost, and difficulty with insertion. Therefore, deliberate efforts using social marketing strategies, appropriate youth-friendly publicity, and peer education must be exerted to provide affordable female condoms and promote usage; such efforts should target vulnerable youths in Nigerian tertiary institutions.

  1. The reliability, validity, sensitivity, specificity and predictive values of the Chinese version of the Rowland Universal Dementia Assessment Scale.

    Science.gov (United States)

    Chen, Chia-Wei; Chu, Hsin; Tsai, Chia-Fen; Yang, Hui-Ling; Tsai, Jui-Chen; Chung, Min-Huey; Liao, Yuan-Mei; Chi, Mei-Ju; Chou, Kuei-Ru

    2015-11-01

    The purpose of this study was to translate the Rowland Universal Dementia Assessment Scale into Chinese and to evaluate the psychometric properties (reliability and validity) and the diagnostic properties (sensitivity, specificity and predictive values) of the Chinese version of the Rowland Universal Dementia Assessment Scale. The accurate detection of early dementia requires screening tools with favourable cross-cultural linguistic and appropriate sensitivity, specificity, and predictive values, particularly for Chinese-speaking populations. This was a cross-sectional, descriptive study. Overall, 130 participants suspected to have cognitive impairment were enrolled in the study. A test-retest for determining reliability was scheduled four weeks after the initial test. Content validity was determined by five experts, whereas construct validity was established by using contrasted group technique. The participants' clinical diagnoses were used as the standard in calculating the sensitivity, specificity, positive predictive value and negative predictive value. The study revealed that the Chinese version of the Rowland Universal Dementia Assessment Scale exhibited a test-retest reliability of 0.90, an internal consistency reliability of 0.71, an inter-rater reliability (kappa value) of 0.88 and a content validity index of 0.97. Both the patients and healthy contrast group exhibited significant differences in their cognitive ability. The optimal cut-off points for the Chinese version of the Rowland Universal Dementia Assessment Scale in the test for mild cognitive impairment and dementia were 24 and 22, respectively; moreover, for these two conditions, the sensitivities of the scale were 0.79 and 0.76, the specificities were 0.91 and 0.81, the areas under the curve were 0.85 and 0.78, the positive predictive values were 0.99 and 0.83 and the negative predictive values were 0.96 and 0.91 respectively. The Chinese version of the Rowland Universal Dementia Assessment Scale

  2. [Reliability and validity of assessment of educational outcomes obtained by students of Medical Rescue at Medical University of Warsaw].

    Science.gov (United States)

    Panczyk, Mariusz; Stachacz, Grzegorz; Gałązkowski, Robert; Gotlib, Joanna

    2016-01-01

    In the interest of preservation of high degree of objectivity of information about students' educational outcomes, a system of assessment needs to meet criteria of appropriate reliability and validity. Analysis of reliability and validity of the system of assessment of students' educational outcomes for courses followed by an examination and covered by a curriculum in Medical Rescue at Medical University of Warsaw (MU W). A retrospective study enrolling a group of 421 students of eight subsequent full education cycles. Detailed data concerning grades for fourteen courses followed by an examination in the entire course of studies were collected. Reliability (Cronbach's alpha coefficient) and criteria validity (Spearman's rank correlation) were assessed. Internal consistency was estimated using a multiple regression model. The levels of assessment reliability for the general university, pre-clinical, and clinical scopes amounted to alpha: 0.42, 0.53, and 0.70, respectively. The strongest positive correlations between the results of pre-clinical and clinical trainings were found for the Anatomy course (r ≈ 0.30). Only in the case of the Pharmacology course it was found that students' achievements in this field were significantly correlated with all other courses of clinical training. The influence of educational outcomes in particular areas of clinical training on the final grade for the entire course of studies was diverse (β regression between 0.04 and 0.11). While the Pharmacology course had the strongest impact on final results, the Surgery course had the least influence on students' final grades (β = 0.04). 1. Sufficient reliability of the system of assessment of educational outcomes in Medical Rescue showed good precision and repeatability of assessment. 2. A low level of validity was caused by a failure to keep the appropriateness of the assessment of educational outcomes in several clinical courses. 3. Prognostic and diagnostic validity of methods used for

  3. Attitudes towards abortion law reforms in Nigeria and factors influencing its social acceptance among female undergraduates in a Nigerian university.

    Science.gov (United States)

    Aimakhu, C O; Adepoju, O J; Nwinee, H I D; Oghide, O; Shittu, A A; Oladunjoye, O A

    2014-12-01

    Unsafe abortion is one of the causes of maternal morbidity and mortality globally and it is still a burden in Nigeria. Restriction laws have been blamed for the recurrent vulnerability of women including female adolescents to unsafe abortions. A cross-sectional, semi-structured, self-administered questionnaire was administered to 407 first year female undergraduates in the three female halls of residence of the University of Ibadan, Nigeria in February 2012 to determine their attitudes to abortion laws and the social acceptance of abortion laws in Nigeria. A vast majority (96.1%) knew what an abortion was and barely half were aware of the grounds in which it may be legal. Only 84 (20.6%) of the respondents knew that there were 2 abortion laws in operation in Nigeria. One hundred and thirteen (27.8%) wanted the current abortion law to be reformed and thirteen (3.2%) admitted that they had had an abortion in the past. More than half of them, 212 (52.1%) would support an abortion if pregnancy followed rape/ incest and 201(49.4%) if there was fetal abnormality. Religious reasons influenced the social opinions on abortion laws in most of the students (73%). The study showed some awareness towards abortion law reforms and we advocate that sexually active young individuals should be encouraged to adopt effective dual protection against unwanted pregnancy and STIs. Efforts should also be made at imparting reproductive health education to youths, especially girls.

  4. Empirical Research Concerning the Impact of the Public Internal Audit on the Accounting System and its Reliability in Romanian Universities

    Directory of Open Access Journals (Sweden)

    Drăguşin Cristina-Petrina

    2016-12-01

    Full Text Available The present paper is materialized in an empirical study concerning the impact of the internal audit on the accounting system and its reliability, in case of public universities in Romania. In order to achieve the study, it was necessary to know the different points of view of the representatives of the accounting departments of public institutions of academic education, using a statistical survey based on questionnaire. The research objectives were focused on obtaining conclusions regarding: the importance of internal auditing of the accounting system and its reliability; the extent to which the internal audit manages to provide reasonable assurances regarding the accounting and financial activity; the importance in auditing of the items related to the accounting activity; the assurance and the adequacy of the human resources allocated to the internal audit departments; the frequency with which the internal audit reports projects are modified in order to follow the audited structure recommendations; the extent to which the audit reports reflect the reality; the internal audit activity contribution in improving the accounting systems and their reliability in the Romanian universities.

  5. Validity and Reliability the Rowland Universal Dementia Assessment Scale in a Sample of Elderly Women

    Directory of Open Access Journals (Sweden)

    Sousan Salary

    2013-10-01

    Full Text Available Objectives: The present study aims to investigate the validity and reliability of measuring dementia scale in a sample of elderly women has been reviewed. Methods & Materials: This study is descriptive based on what has been designed in which 310 elderly women were participated in this study out of two ranges of Tehran Kahrisak Prison and Tehran Jahandidegan Institute after being received the consent letter to participate in. In this study, samples were selected as available sampling and four questionnaires were used to collect information which was completed as an interview with elderly women. Information obtained has been analyzed using SPSS software and related statistical methods. Results: Based on research findings, mean age of people under study was 76/86 years and the scale reliability were reviewed in convergence method (Quality of Life and Elderly's Depression Questionnaire and divergence (The informant Questionnaire on Cognition Decline in Elderly questionnaire and Mine Mental Status Examination (MMSE. Also, scale validity was 0.792 with Cronbach's alpha method and 0.759 with division method and 76.0 with test-retest method. In addition, factor analysis indicates the saturation of this scale of a factor. Conclusion: The results achieved from this above study indicate that this scale has appropriate reliability and validity among elderly women. Therefore, it seems that planning to do this research will be very effective in clinical and complex population.

  6. Sensory Evaluation as a Tool in Determining Acceptability of Innovative Products Developed by Undergraduate Students in Food Science and Technology at the University of Trinidad and Tobago

    Science.gov (United States)

    Singh-Ackbarali, Dimple; Maharaj, Rohanie

    2014-01-01

    This paper discusses the comprehensive and practical training that was delivered to students in a university classroom on how sensory evaluation can be used to determine acceptability of food products. The report presents how students used their training on sensory evaluation methods and analysis and applied it to improving and predicting…

  7. Attitudes and Beliefs About the Acceptability and Justness of Peer Victimization of Lesbian and Gay University Students.

    Science.gov (United States)

    Bradbury, Stacey L; Davis, Alan K; Leith, Jaclyn; Hinman, Nova; Ashrafioun, Lisham; Burmeister, Jacob M; Dworsky, Dryw

    2016-06-01

    We evaluated the acceptability and justness of anti-lesbian and gay victimization among 473 undergraduates. Participants were assigned to one of four vignette conditions that described an individual being verbally victimized in a typical college setting. Each vignette varied by victim gender (male; female) and sexual orientation (lesbian/gay; heterosexual). Participants completed background questionnaires and a measure that assessed the acceptability of the actions described in the vignettes. Overall, victimization was rated as unacceptable regardless of the sexual orientation and gender of the victim. However, participants rated the victimization of lesbian and gay students as more harmful and unjust than victimization of heterosexual students. Although the acceptability of anti-lesbian and gay victimization was low, 3%-12% of participants rated anti-lesbian and gay victimization as slightly or completely acceptable and just. Given that victimization is associated with long-term negative outcomes, college administrators should consider interventions aimed at decreasing the acceptability of victimization among students.

  8. Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

    OpenAIRE

    SCHNETTLER, Berta; VELÁSQUEZ, Carlos; MIRANDA, Horacio; LOBOS, Germán; ORELLANA, Ligia; SEPÚLVEDA, José; MIRANDA, Edgardo; ADASME-BERRÍOS, Cristian; GRUNERT, Klaus

    2015-01-01

    AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM) and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a c...

  9. A multi-state model for the reliability assessment of a distributed generation system via universal generating function

    International Nuclear Information System (INIS)

    Li, Yan-Fu; Zio, Enrico

    2012-01-01

    The current and future developments of electric power systems are pushing the boundaries of reliability assessment to consider distribution networks with renewable generators. Given the stochastic features of these elements, most modeling approaches rely on Monte Carlo simulation. The computational costs associated to the simulation approach force to treating mostly small-sized systems, i.e. with a limited number of lumped components of a given renewable technology (e.g. wind or solar, etc.) whose behavior is described by a binary state, working or failed. In this paper, we propose an analytical multi-state modeling approach for the reliability assessment of distributed generation (DG). The approach allows looking to a number of diverse energy generation technologies distributed on the system. Multiple states are used to describe the randomness in the generation units, due to the stochastic nature of the generation sources and of the mechanical degradation/failure behavior of the generation systems. The universal generating function (UGF) technique is used for the individual component multi-state modeling. A multiplication-type composition operator is introduced to combine the UGFs for the mechanical degradation and renewable generation source states into the UGF of the renewable generator power output. The overall multi-state DG system UGF is then constructed and classical reliability indices (e.g. loss of load expectation (LOLE), expected energy not supplied (EENS)) are computed from the DG system generation and load UGFs. An application of the model is shown on a DG system adapted from the IEEE 34 nodes distribution test feeder.

  10. Knowledge and Acceptability of Human Papillomavirus Vaccination among Women Attending the Gynaecological Outpatient Clinics of a University Teaching Hospital in Lagos, Nigeria.

    Science.gov (United States)

    Okunade, Kehinde S; Sunmonu, Oyebola; Osanyin, Gbemisola E; Oluwole, Ayodeji A

    2017-01-01

    This study was aimed at determining the knowledge and acceptability of HPV vaccine among women attending the gynaecology clinics of the Lagos University Teaching Hospital (LUTH). This was a descriptive cross-sectional study involving 148 consecutively selected women attending the gynaecology clinic of LUTH. Relevant information was obtained from these women using an interviewer-administered questionnaire. The data was analysed and then presented by simple descriptive statistics using tables and charts. Chi-square statistics were used to test the association between the sociodemographical variables and acceptance of HPV vaccination. All significance values were reported at P < 0.05. The mean age of the respondents was 35.7 ± 9.7 years. The study showed that 36.5% of the respondents had heard about HPV infection while only 18.9% had knowledge about the existence of HPV vaccines. Overall, 81.8% of the respondents accepted that the vaccines could be administered to their teenage girls with the level of education of the mothers being the major determinant of their acceptability ( P = 0.013). Awareness of HPV infections and existence of HPV vaccines is low. However, the acceptance of HPV vaccines is generally high. Efforts should be made to increase the awareness about cervical cancer, its aetiologies, and prevention via HPV vaccination.

  11. Using software metrics and software reliability models to attain acceptable quality software for flight and ground support software for avionic systems

    Science.gov (United States)

    Lawrence, Stella

    1992-01-01

    This paper is concerned with methods of measuring and developing quality software. Reliable flight and ground support software is a highly important factor in the successful operation of the space shuttle program. Reliability is probably the most important of the characteristics inherent in the concept of 'software quality'. It is the probability of failure free operation of a computer program for a specified time and environment.

  12. A Systematic Review and Meta-Analysis of the Acceptability and Effectiveness of University Smoke-Free Policies

    Science.gov (United States)

    Lupton, Joshua R.; Townsend, Joy L.

    2015-01-01

    Objective: Systematically review studies of support for, and effectiveness of, university campuses' smoke-free policies. Participants/Methods: A search was carried out for studies in English related to campus smoking bans through June 2013. Eligible studies had outcomes for student or faculty attitudes, or measures of smoking prevalence or…

  13. The Effect of Universal Design for Learning (UDL) Application on E-Learning Acceptance: A Structural Equation Model

    Science.gov (United States)

    Al-Azawei, Ahmed; Parslow, Patrick; Lundqvist, Karsten

    2017-01-01

    Standardising learning content and teaching approaches is not considered to be the best practice in contemporary education. This approach does not differentiate learners based on their individual abilities and preferences. The present research integrates a pedagogical theory "Universal Design for Learning" ("UDL") with an…

  14. Web-based virtual microscopy at the RWTH Aachen University: didactic concept, methods and analysis of acceptance by the students.

    Science.gov (United States)

    Merk, Magdalene; Knuechel, Ruth; Perez-Bouza, Alberto

    2010-12-20

    Fundamental knowledge of microscopic anatomy and pathology has always been an essential part in medical education. The traditional didactic concept comprises theoretical and practical lessons using a light microscope and glass slides. High-speed Internet connections and technical improvement in whole-slide digital microscopy (commonly termed "virtual microscopy") provide a new and attractive approach for both teachers and students. High picture quality and unlimited temporal and spatial availability of histology samples from different fields are key advantages of web-based digital microscopy. In this report we discuss the technical requirements, system efficiency, optical resolution and didactic concept. Furthermore, we present a review of the experience gained in the course of one year based on an analysis of student acceptance. Three groups with a total of 192 students between the 3rd and 5th year of medical studies attending the practical courses of general and advanced histopathology had access to both glass-mounted and digitalized slides. Prior to exams, students were asked to answer an anonymous questionnaire. The results of the study reflect the high acceptance and intensive use of the web-based digital histology by students, thus encouraging the development of further Web-based learning strategies for the teaching of histology and pathology. 2010 Elsevier GmbH. All rights reserved.

  15. ‘Cultural encounters: Western scholarship and Fang statuary from Equatorial Africa’ [Inaugural address, delivered on the acceptance of an extraordinary professorship at Tilburg University, Netherlands, in 2011

    Directory of Open Access Journals (Sweden)

    Wilfried van Damme

    2014-12-01

    Full Text Available In this inaugural address, delivered on the acceptance of an extraordinary professorship at Tilburg University, Netherlands, in 2011, Wilfried van Damme examines three approaches that have been characteristically applied within the Western anthropology of art during the last half century. Illustrating these approaches with reference to the study of Fang statuary from equatorial Africa, he discusses a stylistic approach, focusing on anatomical details and proportions of Fang anthropomorphic sculptures; a culturalist approach, highlighting the local meaning and values these sculptures express; and a postcolonial approach, dealing with the Western appropriation and commodification of Fang statues.

  16. Acceptance of a food of animal origin obtained through genetic modification and cloning in South America: a comparative study among university students and working adults

    Directory of Open Access Journals (Sweden)

    Berta SCHNETTLER

    2015-09-01

    Full Text Available AbstractWith the aim of comparing the acceptance of milk obtained from cloned, genetically modified (GM and conventionally bred cows among working adults and university students, and identifying and characterizing typologies among both subsamples in terms of their preferences, a survey was applied to 400 people in southern Chile, distributed using a simple allocation among the subsamples. Using a conjoint analysis, it was found that consumers preferred milk from a conventional cow. Using a cluster analysis, in both subsamples two segments sensitive to production technology were identified. Rejection of cloning was greatest among university students, whereas a higher proportion of working adults rejected GM. The segments differed in terms of area of residence, knowledge about GM, and milk consumption habits. Contrary to what was expected, no differences were found according to education, gender or degree of satisfaction with food-related life.

  17. Reliability, validity, and responsiveness of the Western Ontario and McMaster Universities Osteoarthritis Index for elderly patients with a femoral neck fracture

    NARCIS (Netherlands)

    Burgers, P.T.; Poolman, R.W.; Bakel, T.M. Van; Tuinebreijer, W.E.; Zielinski, S.M.; Bhandari, M.; Patka, P.; Lieshout, E.M. van; Kampen, A. van; Biert, J.; Vugt, A.B. van; Edwards, M.J.R.; Blokhuis, T.J.; Frolke, J.P.; Geeraedts, L.M.G.; Gardeniers, J.W.M.; Tan, E.C.T.H.; Poelhekke, L.M.S.J.; Waal Malefijt, M.C. de; Schreurs, B.W.; et al.,

    2015-01-01

    BACKGROUND: The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) has been extensively evaluated in groups of patients with osteoarthritis, yet not in patients with a femoral neck fracture. This study aimed to determine the reliability, construct validity, and responsiveness of

  18. Reliability, Validity, and Responsiveness of the Western Ontario and McMaster Universities Osteoarthritis Index for Elderly Patients with a Femoral Neck Fracture

    NARCIS (Netherlands)

    Burgers, Paul T. P. W.; Poolman, Rudolf W.; van Bakel, Theodorus M. J.; Tuinebreijer, Wim E.; Zielinski, Stephanie M.; Bhandari, Mohit; Patka, Peter; van Lieshout, Esther M. M.; Devereaux, P. J.; Guyatt, Gordon H.; Einhorn, Thomas A.; Thabane, Lehana; Schemitsch, Emil H.; Koval, Kenneth J.; Frihagen, Frede; Tetsworth, Kevin; Guerra-Farfan, Ernesto; Walter, Stephen D.; Sprague, Sheila; Swinton, Marilyn; Scott, Taryn; McKay, Paula; Madden, Kim; Heels-Ansdell, Diane; Buckingham, Lisa; Duraikannan, Aravin; Silva, Heather; Heetveld, Martin J.; Burgers, T. P. W.; Zura, Robert D.; Avram, Victoria; Eygendaal, Denise; Krips, Rover; Raven, Eric E. J.; Haverlag, Robert; Mutsaerts, Eduard L. A. R.; Haverkamp, Daniel; van den Bekerom, Michel P. J.; Beimers, Lijkele; de Vries, Jasper; Zurcher, Arthur W.; Bulstra, Gythe H.; Campo, Martin M.; Somford, Mathijs P.; Schep, Niels W. L.; Festen, Sebastiaan; Geeraedts, Leo M. G.; Peters, Rolf; Goslings, J. Carel; Ponsen, Kees Jan

    2015-01-01

    Background: The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) has been extensively evaluated in groups of patients with osteoarthritis, yet not in patients with a femoral neck fracture. This study aimed to determine the reliability, construct validity, and responsiveness of

  19. Reliability, validity, and responsiveness of the Western Ontario and McMaster Universities Osteoarthritis Index for elderly patients with a femoral neck fracture

    NARCIS (Netherlands)

    P.T.P.W. Burgers (Paul); R.W. Poolman (Rudolf); T.M. van Bakel (Theodorus); W.E. Tuinebreijer (Wim); S.M. Zielinski (Stephanie); M. Bhandari (Mohit); P. Patka (Peter); E.M.M. van Lieshout (Esther)

    2015-01-01

    markdownabstractBackground: The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) has been extensively evaluated in groups of patients with osteoarthritis, yet not in patients with a femoral neck fracture. This study aimed to determine the reliability, construct validity, and

  20. Reliability and Validity: A Sine Qua Non for Fair Assessment of Undergraduate Technical and Vocational Education Projects in Nigerian Universities

    Science.gov (United States)

    John, A. C.

    2015-01-01

    The aim of the study was to examine the importance of reliability and validity as necessary foundation for fair assessment. The concepts of reliability, validity, fair assessment and their relationships were analysed. Qualities of fair assessment were discussed. A number of recommendations were made to make assessors be more cautious in award of…

  1. JUPITER: Joint Universal Parameter IdenTification and Evaluation of Reliability - An Application Programming Interface (API) for Model Analysis

    Science.gov (United States)

    Banta, Edward R.; Poeter, Eileen P.; Doherty, John E.; Hill, Mary C.

    2006-01-01

    he Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER API) improves the computer programming resources available to those developing applications (computer programs) for model analysis.The JUPITER API consists of eleven Fortran-90 modules that provide for encapsulation of data and operations on that data. Each module contains one or more entities: data, data types, subroutines, functions, and generic interfaces. The modules do not constitute computer programs themselves; instead, they are used to construct computer programs. Such computer programs are called applications of the API. The API provides common modeling operations for use by a variety of computer applications.The models being analyzed are referred to here as process models, and may, for example, represent the physics, chemistry, and(or) biology of a field or laboratory system. Process models commonly are constructed using published models such as MODFLOW (Harbaugh et al., 2000; Harbaugh, 2005), MT3DMS (Zheng and Wang, 1996), HSPF (Bicknell et al., 1997), PRMS (Leavesley and Stannard, 1995), and many others. The process model may be accessed by a JUPITER API application as an external program, or it may be implemented as a subroutine within a JUPITER API application . In either case, execution of the model takes place in a framework designed by the application programmer. This framework can be designed to take advantage of any parallel processing capabilities possessed by the process model, as well as the parallel-processing capabilities of the JUPITER API.Model analyses for which the JUPITER API could be useful include, for example: Compare model results to observed values to determine how well the model reproduces system processes and characteristics.Use sensitivity analysis to determine the information provided by observations to parameters and predictions of interest.Determine the additional data needed to improve selected model

  2. Acceptance of Moodle as a Teaching/Learning Tool by the Faculty of the Department of Information Studies at Sultan Qaboos University, Oman based on UTAUT

    Directory of Open Access Journals (Sweden)

    E. Saleem Naifa

    2016-12-01

    Full Text Available This research aims to explore the acceptance of Moodle as a teaching and learning tool by the faculty of the Department of Information Studies (IS at Sultan Qaboos University (SQU in the Sultanate of Oman. The researchers employed the Unified Theory of Acceptance and Use of Technology (UTAUT to examine the effects of performance expectancy, effort expectancy, social influence and facilitating conditions on the behav-ioural intention of SQU faculty members to employ Moodle in their instruction. Data were collected by the interview method. Results showed the emergence of two faculty groups: one uses Moodle and one does not use Moodle. In group that uses Moodle, performance expectancy, effort expectancy, social influence, facilitating conditions and behavioural intention are positively related, thereby influencing the faculty members’use behavior. In addition to the aforementioned UTAUT constructs, four additional factors affect Moodle’s adoption. These moderators are gender, age, experience and the voluntariness of use, amongst which gender exhibits the least influence on Moodle adoption. That is, male and female faculty generally both use the learning platform. Although some members of the group that does not use Moodle exhibit optimistic performance expectancy for technology, the overall perception in this regard for Moodle is negative. The other UTAUT constructs exert no influence on this group’s adoption of the learning platform.

  3. Factors associated with 2009 pandemic influenza A (H1N1 vaccination acceptance among university students from India during the post-pandemic phase

    Directory of Open Access Journals (Sweden)

    Thejaswini Venkatesh

    2011-07-01

    Full Text Available Abstract Background There was a low adherence to influenza A (H1N1 vaccination program among university students and health care workers during the pandemic influenza in many parts of the world. Vaccination of high risk individuals is one of the recommendations of World Health Organization during the post-pandemic period. It is not documented about the student's knowledge, attitude and willingness to accept H1N1 vaccination during the post-pandemic period. We aimed to analyze the student's knowledge, attitude and willingness to accept H1N1 vaccination during the post-pandemic period in India. Methods Vaccine against H1N1 was made available to the students of Vellore Institute of Technology, India from September 2010. The data are based on a cross-sectional study conducted during October 2010 to January 2011 using a self-administered questionnaire with a representative sample of the student population (N = 802. Results Of the 802 respondents, only 102/802 (12.7% had been vaccinated and 105/802 (13% planned to do so in the future, while 595/802 (74% would probably or definitely not get vaccinated in the future. The highest coverage was among the female (65/102, 63.7% and non-compliance was higher among men in the group (384/595; 64.5% (p Conclusions Our study shows that the vaccination coverage among university students remains very low in the post-pandemic period and doubts about the safety and effectiveness of the vaccine are key elements in their rejection. Our results indicate a need to provide accessible information about the vaccine safety by scientific authorities and fill gaps and confusions in this regard.

  4. Acceptability and feasibility of a low-cost, theory-based and co-produced intervention to reduce workplace sitting time in desk-based university employees.

    Science.gov (United States)

    Mackenzie, Kelly; Goyder, Elizabeth; Eves, Francis

    2015-12-24

    Prolonged sedentary time is linked with poor health, independent of physical activity levels. Workplace sitting significantly contributes to sedentary time, but there is limited research evaluating low-cost interventions targeting reductions in workplace sitting. Current evidence supports the use of multi-modal interventions developed using participative approaches. This study aimed to explore the acceptability and feasibility of a low-cost, co-produced, multi-modal intervention to reduce workplace sitting. The intervention was developed with eleven volunteers from a large university department in the UK using participative approaches and "brainstorming" techniques. Main components of the intervention included: emails suggesting ways to "sit less" e.g. walking and standing meetings; free reminder software to install onto computers; social media to increase awareness; workplace champions; management support; and point-of-decision prompts e.g. by lifts encouraging stair use. All staff (n = 317) were invited to take part. Seventeen participated in all aspects of the evaluation, completing pre- and post-intervention sitting logs and questionnaires. The intervention was delivered over four weeks from 7th July to 3rd August 2014. Pre- and post-intervention difference in daily workplace sitting time was presented as a mean ± standard deviation. Questionnaires were used to establish awareness of the intervention and its various elements, and to collect qualitative data regarding intervention acceptability and feasibility. Mean baseline sitting time of 440 min/workday was reported with a mean reduction of 26 ± 54 min/workday post-intervention (n = 17, 95 % CI = -2 to 53). All participants were aware of the intervention as a whole, although there was a range of awareness for individual elements of the intervention. The intervention was generally felt to be both acceptable and feasible. Management support was perceived to be a strength, whilst specific

  5. Dr. Anna G. Jonasdottir: Acceptance Speech for Honorary Doctorate from Faculty of Political Science, University of Iceland. Given 18th of June, 2015

    Directory of Open Access Journals (Sweden)

    Anna G. Jónasdóttir

    2016-06-01

    Full Text Available On June 18th the Faculty of Political Science, University of Iceland, celebrated 100 years of women’s‘ voting rights in Iceland with a special conference, Power and democracy 100 years later. In association with the conference Dr. Anna Guðrún Jónasdóttir, Professor emerita at the University of Örebro, Sweden, was awarded an honorary doctorate at the Faculty of Political Science. Anna Guðrún was the first Icelandic woman to complete a doctorate in political science, in 1991, and also the first to embark on an advanced academic career in political science and gender studies. It is therefore highly appropriate that Anna Guðrún should be awarded the first honorary doctorate at the Faculty of Political Science, where these disciplines are located. Her research covers a broad spectrum, including political science, sociology, economic history, psychology and gender studies. She was among the first to deal in a theoretical manner with gender, power and politics, which was considered rather provocative at the start of her academic career in the early 1970s. She is a pioneer in intertwining political research and gender studies and her most important research is in the field of power and personal gender relations. Anna Guðrún moved to Sweden at an early age but has kept in touch with the Icelandic research community. Below we publish her acceptance speech on the occasion when the honorary doctorate was awarded. It reflects clearly how her ideas have developed and her intimate sense for how personal and political factors bring politics and gender studies closer at the same time as she deepens and broadens both of their subjects.

  6. Reliability and validity of Persian version of Western Ontario and McMaster Universities Osteoarthritis index in knee osteoarthritis

    Directory of Open Access Journals (Sweden)

    Bina Eftekhar-Sadat

    2015-08-01

    Full Text Available Introduction: This study aimed to test the reliability and validity of translated and adapted version of Western Ontario and McMaster (WOMAC questionnaire in Persian language speaking patients with symptomatic osteoarthritis (OA of the knee. Methods: 100 consecutive patients, attended 3 major referral rehabilitation centers at the northwest of Iran, were asked to answer two disease-specific questionnaires WOMAC and knee injury and osteoarthritis outcome score (KOOS. The same patients were readmitted for refilling the same questionnaire 24-48 hours after the first visit. Internal consistency, reliability, and validity were assessed. Results: There were statistically significant correlations between WOMAC and KOOS in case of the pain (P < 0.001 and stiffness (P = 0.004 scores subclass, the sum of difficulty with performing daily activity (DPDA score (P = 0.001 and also the total score (P < 0.001. Internal consistency with Cronbach’s alpha for the pain, stiffness, and physical function subscales were 0.96, 0.98, and 0.99, respectively. Internal consistency with Cronbach’s alpha for the total score of WOMAC was 0.99. Conclusion: We found that this Persian version of WOMAC questionnaire is a reliable and valid version for evaluating the knee OA.

  7. A survey of university students' perceptions of learning management systems in a low-resource setting using a technology acceptance model.

    Science.gov (United States)

    Chipps, Jennifer; Kerr, Jane; Brysiewicz, Petra; Walters, Fiona

    2015-02-01

    Learning management systems have been widely advocated for the support of distance learning. In low-resource settings, the uptake of these systems by students has been mixed. This study aimed to identify, through the use of the Technology Acceptance Model, the individual, organizational, and technological factors that could be influencing the use of learning management systems. A simple quantitative descriptive survey was conducted of nursing and health science students at a university in South Africa as part of their first exposure to a learning management system. A total of 274 respondents (56.7%) completed the survey questionnaire, made up of 213 nursing respondents (87.7%) and 61 health sciences respondents (25%). Overall, the respondents found the learning management system easy to use and useful for learning. There were significant differences between the two groups of respondents, with the respondents from health sciences being both younger and more computer literate. The nursing respondents, who received more support and orientations, reported finding the learning management system more useful. Recommendations are made for training and support to ensure uptake.

  8. Factorial validity and reliability of the Malaysian simplified Chinese version of Multidimensional Scale of Perceived Social Support (MSPSS-SCV) among a group of university students.

    Science.gov (United States)

    Guan, Ng Chong; Seng, Loh Huai; Hway Ann, Anne Yee; Hui, Koh Ong

    2015-03-01

    This study was aimed at validating the simplified Chinese version of the Multidimensional Scale of Perceived Support (MSPSS-SCV) among a group of medical and dental students in University Malaya. Two hundred and two students who took part in this study were given the MSPSS-SCV, the Medical Outcome Study social support survey, the Malay version of the Beck Depression Inventory, the Malay version of the General Health Questionnaire, and the English version of the MSPSS. After 1 week, these students were again required to complete the MSPSS-SCV but with the item sequences shuffled. This scale displayed excellent internal consistency (Cronbach's α = .924), high test-retest reliability (.71), parallel form reliability (.92; Spearman's ρ, P students. It could therefore be used as a simple screening tool among young educated Malaysian adolescents. © 2013 APJPH.

  9. Acceptability, acceptance and decision making

    International Nuclear Information System (INIS)

    Ackerschott, H.

    2002-01-01

    There is a fundamental difference between the acceptability of a civilizatory or societal risk and the acceptability of the decision-making process that leads to a civilizatory or societal risk. The analysis of individual risk decisions - regarding who, executes when which indisputably hazardous, unhealthy or dangerous behaviour under which circumstances - is not helpful in finding solutions for the political decisions at hand in Germany concerning nuclear energy in particular or energy in general. The debt for implementation of any technology, in the sense of making the technology a success in terms of broad acceptance and general utilisation, lies with the particular industry involved. Regardless of the technology, innovation research identifies the implementation phase as most critical to the success of any innovation. In this sense, nuclear technology is at best still an innovation, because the implementation has not yet been completed. Fear and opposition to innovation are ubiquitous. Even the economy - which is often described as 'rational' - is full of this resistance. Innovation has an impact on the pivotal point between stability, the presupposition for the successful execution of decisions already taken and instability, which includes insecurity, but is also necessary for the success of further development. By definition, innovations are beyond our sphere of experience; not at the level of reliability and trust yet to come. Yet they are evaluated via the simplifying heuristics for making decisions proven not only to be necessary and useful, but also accurate in the familiar. The 'settlement of the debt of implementation', the accompanying communication, the decision-making procedures concerning the regulation of averse effects of the technology, but also the tailoring of the new technology or service itself must be directed to appropriate target groups. But the group often aimed at in the nuclear debate, the group, which largely determines political

  10. Random Fuzzy Extension of the Universal Generating Function Approach for the Reliability Assessment of Multi-State Systems Under Aleatory and Epistemic Uncertainties

    DEFF Research Database (Denmark)

    Li, Yan-Fu; Ding, Yi; Zio, Enrico

    2014-01-01

    . In this work, we extend the traditional universal generating function (UGF) approach for multi-state system (MSS) availability and reliability assessment to account for both aleatory and epistemic uncertainties. First, a theoretical extension, named hybrid UGF (HUGF), is made to introduce the use of random...... fuzzy variables (RFVs) in the approach. Second, the composition operator of HUGF is defined by considering simultaneously the probabilistic convolution and the fuzzy extension principle. Finally, an efficient algorithm is designed to extract probability boxes ($p$ -boxes) from the system HUGF, which...

  11. Reliability engineering

    International Nuclear Information System (INIS)

    Lee, Chi Woo; Kim, Sun Jin; Lee, Seung Woo; Jeong, Sang Yeong

    1993-08-01

    This book start what is reliability? such as origin of reliability problems, definition of reliability and reliability and use of reliability. It also deals with probability and calculation of reliability, reliability function and failure rate, probability distribution of reliability, assumption of MTBF, process of probability distribution, down time, maintainability and availability, break down maintenance and preventive maintenance design of reliability, design of reliability for prediction and statistics, reliability test, reliability data and design and management of reliability.

  12. Human reliability

    International Nuclear Information System (INIS)

    Bubb, H.

    1992-01-01

    This book resulted from the activity of Task Force 4.2 - 'Human Reliability'. This group was established on February 27th, 1986, at the plenary meeting of the Technical Reliability Committee of VDI, within the framework of the joint committee of VDI on industrial systems technology - GIS. It is composed of representatives of industry, representatives of research institutes, of technical control boards and universities, whose job it is to study how man fits into the technical side of the world of work and to optimize this interaction. In a total of 17 sessions, information from the part of ergonomy dealing with human reliability in using technical systems at work was exchanged, and different methods for its evaluation were examined and analyzed. The outcome of this work was systematized and compiled in this book. (orig.) [de

  13. [Academic and psycho-socio-familiar factors associated to anxiety and depression in university students. Reliability and validity of a questionnaire].

    Science.gov (United States)

    Balanza Galindo, Serafín; Morales Moreno, Isabel; Guerrero Muñoz, Joaquín; Conesa Conesa, Ana

    2008-01-01

    The high frequency of anxiety and depression in university students is related to social, family factors and academic stress. The aim of this research is to determine the internal consistency and validity of a questionnaire on socio-familiar and academic situations which may be related to psychopathological situations in university students. The research was carried out at the Universidad Católica San Antonio de Murcia with 700 students, to whom a questionnaire made by the researchers was given. This questionnaire included items which evaluated academic and socio-familiar aspects. Variables regarding various stressful situations amongst students, and the Goldbergs level of anxiety and depression scale were used as independent facts of research in order to measure the validity of the questionnaire. The reliability of the questionnaire was shown after obtaining an intraclass correlation coefficient of 0.819. The original questionnaire with 19 items was reduced to 15 items after the homogeneity analysis, obtaining a Cronbach alpha of 0.758. The validity of constructio was evaluated with the factor analysis of the questionnaire, with a result of two factors which represented academic aspects and socio-familiar aspects. Those students with a positive anxiety and depression test were the ones who obtained the higher score on the global questionnaire and in both factors, proving the validity of the criteria. The research questionnaire is an agile and easy to use tool for the assessment and early detection of anxiety and depression in university students.

  14. Cross-cultural adaptation, reliability and validity of the Arabic version of the reduced Western Ontario and McMaster Universities Osteoarthritis index in patients with knee osteoarthritis.

    Science.gov (United States)

    Alghadir, Ahmad; Anwer, Shahnawaz; Iqbal, Zaheen Ahmed; Alsanawi, Hisham Abdulaziz

    2016-01-01

    We adapted the reduced Western Ontario and McMaster Universities Osteoarthritis (WOMAC) index for the Arabic language and tested its metric properties in patients with knee osteoarthritis (OA). One hundred and twenty-one consecutive patients who were referred for physiotherapy to the outpatient department were asked to answer the Arabic version of the reduced WOMAC index (ArWOMAC). After the completion of the ArWOMAC, the intensity of knee pain and general health status were assessed using the visual analog scale (VAS) and the 12-item short form health survey (SF-12), respectively. A second assessment was performed at least 48 h after the first session to assess test-retest reliability. The test-retest reliability was quantified using the intra-class correlation coefficient (ICC), and Cronbach's alpha was calculated to assess the internal consistency of the Arabic questionnaire. The construct validity was assessed using Spearman rank correlation coefficients. The total ArWOMAC scale and pain and function subscales were internally consistent with Cronbach's coefficient alpha of 0.91, 0.89 and 0.90, respectively. Test-retest reliability was good to excellent with ICC of 0.91, 0.89 and 0.90, respectively. SF-12 and VAS score significantly correlated with ArWOMAC index (p < 0.01), which support the construct validity. The standard error of measurement (SEM) of the total scale was 2.94, based on repeated measurements for test-retest. The minimum detectable change based on the SEM for test-retest was 8.15. The ArWOMAC index is a reliable and valid instrument for evaluating the severity of knee OA, with metric properties in agreement with the original version. Although, the reduced WOMAC index has been clinically utilized within the Saudi population, the Arabic version of this instrument is not validated for an Arab population to measure lower limb functional disability caused by OA. The Arabic version of reduced WOMAC (ArWOMAC) index is a reliable and valid scale

  15. Acceptability and reliability of an adolescent risk behavior questionnaire administered with audio and computer support Aceptabilidad y fiabilidad de un cuestionario sobre el comportamiento de riesgo de los adolescentes aplicado con el apoyo de audio y computadora

    Directory of Open Access Journals (Sweden)

    Juan Pablo Gutiérrez

    2009-05-01

    Full Text Available OBJECTIVE: To test acceptability and reliability of audio computer-assisted self-interviewing (ACASI system administered at the household level to gather data on risk behaviors among adolescents in Mexico. METHODS: Answers to sensitive behavior-related questions obtained using ACASI systems were compared with answers to the same questions obtained through face-to-face interviews (FFIs. Focus groups were conducted to explore ACASI acceptability among adolescents and its feasibility in obtaining better self-reported data on sensitive behaviors. RESULTS: ACASI was adolescents' preferred method for reporting risk behaviors, particularly sexual behavior, and did not pose greater challenges to respondents versus FFIs. Also, more risk behaviors were reported through ACASI versus FFIs. CONCLUSION: The use of ACASI systems in disadvantaged households to obtain data on adolescent risk behavior is not only feasible but may also improve data quality in the case of complex questionnaires, compared with FFIs, and should therefore be considered as an alternative survey method.OBJETIVO: Evaluar la aceptabilidad y fiabilidad de un sistema de autoentrevista asistido por audio y computadora (ACASI aplicado en los hogares para recopilar información sobre el comportamiento de riesgo de los adolescentes en México. MÉTODOS: Se compararon las respuestas obtenidas mediante el sistema ACASI y entrevistas cara a cara (FFI sobre aspectos sensibles del comportamiento. Se analizó en grupos focales la aceptabilidad de ACASI para los adolescentes y la factibilidad de obtener mejor información en los autoinformes sobre aspectos sensibles de su conducta. RESULTADOS: Los adolescentes prefirieron el sistema ACASI para informar sobre conductas de riesgo, en particular las relacionadas con el sexo, y no constituyó un mayor reto para los entrevistados en comparación con las FFI. Se informaron más comportamientos de riesgo mediante ACASI que en las FFI. CONCLUSIONES: El empleo

  16. Universe

    CERN Document Server

    2009-01-01

    The Universe, is one book in the Britannica Illustrated Science Library Series that is correlated to the science curriculum in grades 5-8. The Britannica Illustrated Science Library is a visually compelling set that covers earth science, life science, and physical science in 16 volumes.  Created for ages 10 and up, each volume provides an overview on a subject and thoroughly explains it through detailed and powerful graphics-more than 1,000 per volume-that turn complex subjects into information that students can grasp.  Each volume contains a glossary with full definitions for vocabulary help and an index.

  17. Reliability Engineering

    International Nuclear Information System (INIS)

    Lee, Sang Yong

    1992-07-01

    This book is about reliability engineering, which describes definition and importance of reliability, development of reliability engineering, failure rate and failure probability density function about types of it, CFR and index distribution, IFR and normal distribution and Weibull distribution, maintainability and movability, reliability test and reliability assumption in index distribution type, normal distribution type and Weibull distribution type, reliability sampling test, reliability of system, design of reliability and functionality failure analysis by FTA.

  18. Measuring the moderating influence of gender on the acceptance of e-book amongst mathematics and statistics students at universities in Libya

    Directory of Open Access Journals (Sweden)

    Asma Mohmead Smeda

    2017-06-01

    Full Text Available The success of using any types of technology in education depends on a large extent of the acceptance of information technology (IT by students. Therefore, understanding the factors influencing the acceptance of electronic book (e-book is essential for decision-makers and those interested in the e-book industry. Based on an extended technology acceptance model (TAM, this paper examines the impact of some factors on the students’ behavioural intention (BI toward adoption of the e-book in mathematics and statistics. This paper also investigates the effect of gender differences on the relationship between the factors affecting the acceptance of e-book. A self-administered survey was used to collect data from 392 mathematics and statistics undergraduate students. The research model has shown that the factors related to the social factor and users’ characteristics are the critical factors that affect the acceptance of the e-book. The results also indicated that perceived usefulness (PU, perceived ease of use (PEOU and students’ attitude (AU have strongly affected students’ BI. Self-efficacy (SE has a significant impact on PEOU while social influence (SI has a significant influence on students’ AU. Moreover, the results confirmed that most of the TAM constructs were significant in both models (males and females, where there are no differences between males and females; however, only PEOU has been affected by the gender moderator. The results showed that the impact of the factor of SI on females was more than males. On the other hand, female students were more confident in the use of the e-book than males. In general, the female students’ model was more powerful in explaining the variance than males’ model.

  19. Operational safety reliability research

    International Nuclear Information System (INIS)

    Hall, R.E.; Boccio, J.L.

    1986-01-01

    Operating reactor events such as the TMI accident and the Salem automatic-trip failures raised the concern that during a plant's operating lifetime the reliability of systems could degrade from the design level that was considered in the licensing process. To address this concern, NRC is sponsoring the Operational Safety Reliability Research project. The objectives of this project are to identify the essential tasks of a reliability program and to evaluate the effectiveness and attributes of such a reliability program applicable to maintaining an acceptable level of safety during the operating lifetime at the plant

  20. Reliability and validity of the Western Ontario and McMaster Universities (WOMAC) Osteoarthritis Index in Italian patients with osteoarthritis of the knee.

    Science.gov (United States)

    Salaffi, F; Leardini, G; Canesi, B; Mannoni, A; Fioravanti, A; Caporali, R; Lapadula, G; Punzi, L

    2003-08-01

    The Western Ontario and McMaster Universities (WOMAC) Osteoarthritis (OA) Index is a tested questionnaire to assess symptoms and physical functional disability in patients with OA of the knee and the hip. We adapted the WOMAC for the Italian language and tested its metric properties in 304 patients with symptomatic OA of the knee. Three hundred and four consecutive patients, attending 29 rheumatologic outpatient clinic in northern, central, and southern Italy, were asked to answer two disease-specific questionnaires (WOMAC and Lequesne algofunctional index) and one generic instrument (Medical Outcomes Study SF-36 Health Survey-MOS SF-36). A sample of 258 patients was readministered the WOMAC 7-10 days after the first visit and the structured interview, which also assessed demographic and other characteristics. Internal consistency was assessed using Cronbach's alpha, reliability using intraclass correlation coefficients (ICCs), and construct and discriminant validity using Spearman's correlations, Wilcoxon rank sum test, and Kruskal-Wallis test. All WOMAC subscales (pain, stiffness, and physical function) were internally consistent with Cronbach's coefficient alpha of 0.91, 0.81, and 0.84, respectively. Test-retest reliability was satisfactory with ICCs of 0.86, 0.68, and 0.89, respectively. In comparison with the SF-36, the expected correlations were found when comparing items measuring similar constructs, supporting the concepts of convergent construct validity. Very high correlations were also obtained between WOMAC scores and Lequesne OA algofunctional index. WOMAC physical function, but not WOMAC stiffness and pain subscales, was weakly associated with radiological OA severity (P=0.03). Also, WOMAC pain score was inversely correlated (P=0.01) with years of formal education. Examination of discriminant validity showed that the scores on the WOMAC and SF-36 followed hypothesized patterns: the WOMAC discriminated better among subjects with varying severity of

  1. Reliability, validity, and responsiveness of the Western Ontario and McMaster Universities Osteoarthritis Index for elderly patients with a femoral neck fracture.

    Science.gov (United States)

    Burgers, Paul T P W; Poolman, Rudolf W; Van Bakel, Theodorus M J; Tuinebreijer, Wim E; Zielinski, Stephanie M; Bhandari, Mohit; Patka, Peter; Van Lieshout, Esther M M

    2015-05-06

    The Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) has been extensively evaluated in groups of patients with osteoarthritis, yet not in patients with a femoral neck fracture. This study aimed to determine the reliability, construct validity, and responsiveness of the WOMAC compared with the Short Form-12 (SF-12) and the EuroQol 5D (EQ-5D) questionnaires for the assessment of elderly patients with a femoral neck fracture. Reliability was tested by assessing the Cronbach alpha. Construct validity was determined with the Pearson correlation coefficient. Change scores were calculated from ten weeks to twelve months of follow-up. Standardized response means and floor and ceiling effects were determined. Analyses were performed to compare the results for patients less than eighty years old with those for patients eighty years of age or older. The mean WOMAC total score was 89 points before the fracture in the younger patients and increased from 70 points at ten weeks to 81 points at two years postoperatively. In the older age group, these scores were 86, 75, and 78 points. The mean WOMAC pain scores before the fracture and at ten weeks and two years postoperatively were 92, 76, and 87 points, respectively, in the younger age group and 92, 84, and 93 points in the older age group. Function scores were 89, 68, and 79 points for the younger age group and 84, 71, and 73 points for the older age group. The Cronbach alpha for pain, stiffness, function, and the total scale ranged from 0.83 to 0.98 for the younger age group and from 0.79 to 0.97 for the older age group. Construct validity was good, with 82% and 79% of predefined hypotheses confirmed in the younger and older age groups, respectively. Responsiveness was moderate. No floor effects were found. Moderate to large ceiling effects were found for pain and stiffness scales at ten weeks and twelve months in younger patients (18% to 36%) and in the older age group (38% to 53%). The WOMAC showed good

  2. ISO 9000 ACCEPTANCE AND THE MODERATING EFFECT OF THE IMPLEMENTATION STRATEGY: THE CASE OF THE FACULTY OF BUSINESS MANAGEMENT, UNIVERSITI TEKNOLOGI MARA, SHAH ALAM

    Directory of Open Access Journals (Sweden)

    Noraini Ismail

    2006-01-01

    Full Text Available Academic institutions in the country are at present re-examining their business philosophy and trying to deliver quality education to remain attractive. Pressed by globalization, liberalization and accelerating competition, the education industry is facing up to these challenges by becoming more innovative in its transformation. Getting the ISO 9000 certification is quite a trendy phenomenon nowadays. But how do the academics react to this management system innovation? This paper tests a model of innovation acceptance (ISO 9000 certification that conceptualizes interest, knowledge, involvement and perceived value as independent variables and implementation strategy as the moderator. One hundred and fifty structured questionnaires were distributed to the academic staff of the Faculty of Business Management where ISO initiatives were underway. The study shows that there is a significant correlation between perceived value with interest, knowledge, acceptance of innovation and implementation. Hierarchical multiple regression analysis indicates that the implementation strategy (participative strategy enhances the relationship between interest and innovation acceptance. Interest can be cultivated, knowledge disseminated and involvement maximized through an implementation strategy that co-opts the staff from the inception of the change initiative.

  3. Dr. Anna G. Jonasdottir: Acceptance Speech for Honorary Doctorate from Faculty of Political Science, University of Iceland. Given 18th of June, 2015

    OpenAIRE

    Anna G. Jónasdóttir

    2016-01-01

    On June 18th the Faculty of Political Science, University of Iceland, celebrated 100 years of women’s‘ voting rights in Iceland with a special conference, Power and democracy 100 years later. In association with the conference Dr. Anna Guðrún Jónasdóttir, Professor emerita at the University of Örebro, Sweden, was awarded an honorary doctorate at the Faculty of Political Science. Anna Guðrún was the first Icelandic woman to complete a doctorate in political science, in 1991, and also the first...

  4. Who Defines Culturally Acceptable Health Access? Universal rights, healthcare politics and the problems of two Mbya-Guarani communities in the Misiones Province, Argentina

    Directory of Open Access Journals (Sweden)

    A. Sy

    2013-05-01

    Full Text Available This paper seeks to analyze the problems and barriers encountered when public policy health programs are implemented within indigenous communities. The initial stumbling block for such programs is precisely the idea of health as a universal right, around which emerges a characterization and stereotype of the indigenous population who are consequently addressed as a homogenized unit subsisting below the poverty line, and marginalized. A result of this is that the  particular ethno-cultural register of such populations fails to be acknowledged and form part of a systematic public health policy. Consequently, health policies become generalized in character, unable to variate and differentiate according to the culturally specific contexts within which health outreach and access is needed. In this sense, based on the results of an ethnographic study carried out in two Mbya-Guaraní indigenous communities of Argentina, our study highlights as to how public policies of indigenous health are perceived, their impact value measured, and the meanings which emerge locally about the policy practices implemented.Lastly, our study identifies problems that can be avoided in fulfilling the goals of universal policies and certain questions to consider at the time of policy design and implementation.

  5. Power transformer reliability modelling

    NARCIS (Netherlands)

    Schijndel, van A.

    2010-01-01

    Problem description Electrical power grids serve to transport and distribute electrical power with high reliability and availability at acceptable costs and risks. These grids play a crucial though preferably invisible role in supplying sufficient power in a convenient form. Today’s society has

  6. Acceptance, Tolerance, Participation

    International Nuclear Information System (INIS)

    1993-01-01

    The problem of radioactive waste management from an ethical and societal viewpoint was treated in this seminar, which had participants from universities (social, theological, philosophical and science institutes), waste management industry, and regulatory and controlling authorities. After initial reviews on repository technology, policies and schedules, knowledge gaps, and ethical aspects on decision making under uncertainty, four subjects were treated in lectures and discussions: Democratic collective responsibility, Handling threats in democratic decision making, Waste management - a technological operation with a social dimension, Acceptance and legitimity. Lectures with comments and discussions are collected in this report

  7. Software reliability

    CERN Document Server

    Bendell, A

    1986-01-01

    Software Reliability reviews some fundamental issues of software reliability as well as the techniques, models, and metrics used to predict the reliability of software. Topics covered include fault avoidance, fault removal, and fault tolerance, along with statistical methods for the objective assessment of predictive accuracy. Development cost models and life-cycle cost models are also discussed. This book is divided into eight sections and begins with a chapter on adaptive modeling used to predict software reliability, followed by a discussion on failure rate in software reliability growth mo

  8. Do hospital physicians really want to go digital? Acceptance of a picture archiving and communication system in a university hospital; Moechten Krankenhausaerzte wirklich auf digitale Systeme umsteigen? Die Akzeptanz gegenueber einem Bildarchivierungs- und Uebermittlungssystem in einer Universitaetsklinik

    Energy Technology Data Exchange (ETDEWEB)

    Duyck, P.; Pynoo, B.; Devolder, P.; Voet, T.; Adang, L.; Vercruysse, J. [Radiologie und medizinische Bildgebung, Universitaetsklinik Gent (Belgium)

    2008-07-15

    Purpose: radiology departments are making the transition from analog film to digital images by means of PACS (Picture Archiving and Communication System). It is critical for the hospital that its physicians adopt and accept the new digital work method regarding radiological information. The aim of this study is to investigate hospital physicians' acceptance of PACS using questionnaires pre- and post-implementation and to identify main influencing factors. Materials and methods: the study was conducted in an 1169 bed university hospital. The UTAUT (Unified Theory of Acceptance and Use of Technology) questionnaire was administered at two times: one month pre-implementation (T1) and 1.5 years post-implementation (T2) of PACS, targeting all hospital physicians with the exemption of radiologists. The UTAUT scales (Behavioral Intention BI; Facilitating Conditions FC; Effort Expectancy EE; Performance Expectancy PE; Anxiety ANX; Social Influence SI; System Use USE; Attitude toward technology ATT; Self-Efficacy SE) were used to assess questions regarding: (a) PACS' usefulness, (b) PACS' ease of learning/using, (c) PACS support availability, (d) the perceived pressure to use PACS, (e) physicians' attitude towards PACS and (f) physicians' intention to use and actual use of PACS. Results: at T1 scale ratings were positive toward the PACS implementation. The ratings on all scales with the exception of self-efficacy improved at T2. Regression analysis revealed that the key factor for intention to use PACS at T1 was the usefulness of PACS, while the availability and awareness of support was its most important predictor at T2. Overall, PE was the best predictor of BI, but all four UTAUT-determinants (PE, FC, EE and SI) were salient for its prediction. Variance explained in BI ranged from 31 to 37% while variance explained in USE was very low (3%). (orig.)

  9. Safety and reliability criteria

    International Nuclear Information System (INIS)

    O'Neil, R.

    1978-01-01

    Nuclear power plants and, in particular, reactor pressure boundary components have unique reliability requirements, in that usually no significant redundancy is possible, and a single failure can give rise to possible widespread core damage and fission product release. Reliability may be required for availability or safety reasons, but in the case of the pressure boundary and certain other systems safety may dominate. Possible Safety and Reliability (S and R) criteria are proposed which would produce acceptable reactor design. Without some S and R requirement the designer has no way of knowing how far he must go in analysing his system or component, or whether his proposed solution is likely to gain acceptance. The paper shows how reliability targets for given components and systems can be individually considered against the derived S and R criteria at the design and construction stage. Since in the case of nuclear pressure boundary components there is often very little direct experience on which to base reliability studies, relevant non-nuclear experience is examined. (author)

  10. Human reliability

    International Nuclear Information System (INIS)

    Embrey, D.E.

    1987-01-01

    Concepts and techniques of human reliability have been developed and are used mostly in probabilistic risk assessment. For this, the major application of human reliability assessment has been to identify the human errors which have a significant effect on the overall safety of the system and to quantify the probability of their occurrence. Some of the major issues within human reliability studies are reviewed and it is shown how these are applied to the assessment of human failures in systems. This is done under the following headings; models of human performance used in human reliability assessment, the nature of human error, classification of errors in man-machine systems, practical aspects, human reliability modelling in complex situations, quantification and examination of human reliability, judgement based approaches, holistic techniques and decision analytic approaches. (UK)

  11. Reliability Calculations

    DEFF Research Database (Denmark)

    Petersen, Kurt Erling

    1986-01-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety...... and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic...... approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very...

  12. Reliability-Based Code Calibration

    DEFF Research Database (Denmark)

    Faber, M.H.; Sørensen, John Dalsgaard

    2003-01-01

    The present paper addresses fundamental concepts of reliability based code calibration. First basic principles of structural reliability theory are introduced and it is shown how the results of FORM based reliability analysis may be related to partial safety factors and characteristic values....... Thereafter the code calibration problem is presented in its principal decision theoretical form and it is discussed how acceptable levels of failure probability (or target reliabilities) may be established. Furthermore suggested values for acceptable annual failure probabilities are given for ultimate...... and serviceability limit states. Finally the paper describes the Joint Committee on Structural Safety (JCSS) recommended procedure - CodeCal - for the practical implementation of reliability based code calibration of LRFD based design codes....

  13. Reliability Engineering

    CERN Document Server

    Lazzaroni, Massimo

    2012-01-01

    This book gives a practical guide for designers and users in Information and Communication Technology context. In particular, in the first Section, the definition of the fundamental terms according to the international standards are given. Then, some theoretical concepts and reliability models are presented in Chapters 2 and 3: the aim is to evaluate performance for components and systems and reliability growth. Chapter 4, by introducing the laboratory tests, puts in evidence the reliability concept from the experimental point of view. In ICT context, the failure rate for a given system can be

  14. Reliability training

    Science.gov (United States)

    Lalli, Vincent R. (Editor); Malec, Henry A. (Editor); Dillard, Richard B.; Wong, Kam L.; Barber, Frank J.; Barina, Frank J.

    1992-01-01

    Discussed here is failure physics, the study of how products, hardware, software, and systems fail and what can be done about it. The intent is to impart useful information, to extend the limits of production capability, and to assist in achieving low cost reliable products. A review of reliability for the years 1940 to 2000 is given. Next, a review of mathematics is given as well as a description of what elements contribute to product failures. Basic reliability theory and the disciplines that allow us to control and eliminate failures are elucidated.

  15. Knowledge of the Concept of Encephalic Death: Is This an Obstacle in the Acceptance of Donation and Transplantation of Organs Among Students of Nursing at the Medical University of Warsaw in Poland?

    Science.gov (United States)

    Mikla, M; Rios, A; Lopez-Navas, A; Gotlib, J; Kilanska, D; Martinez-Alarcón, L; Ramis, G; Ramirez, P; Lopez Montesinos, M J

    2016-09-01

    The knowledge and acceptance of the concept of brain death among future health professionals is essential. The objective of this study was to analyze the knowledge of the concept of brain death among nursing students at the Medical University of Warsaw and determine the factors that affect it. Academic year 2011-2012, nursing students of the University of Poland. Sampling points in 5 compulsory-attendance nursing courses with a completion rate >80%. Validated questionnaire (PCID-DTO Rios), anonymous and self-administered. The completion rate was 96% (793/828); 71% (n = 561) knew the concept of brain death, 22% (n = 178) did not know it, and 7% (n = 54) did not know that it implies the death of the patient. Variables related to the correct knowledge: 1) to be studying in 4th year compared with 1st year (85% vs 60%; P ≤ .001); 2) discuss the subject with family (76% vs 61%; P ≤ .001); 3) discuss with friends (73% vs 63%; P = .009); and 4) having a favorable attitude toward organ donation (74% vs 65%; P = .011). In the multivariate analysis, the variables that remained independent were studying in 4th year (odds ratio [OR], 3.809; 95% confidence interval [CI], 2.006-5.823; P ≤ .001) and discussed with family concerning donation and transplantation (OR, 1.718; 95% CI, 1.241-2.381; P ≤ .001). One-third of the nursing students were unfamiliar with the concept of brain death. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Reliability calculations

    International Nuclear Information System (INIS)

    Petersen, K.E.

    1986-03-01

    Risk and reliability analysis is increasingly being used in evaluations of plant safety and plant reliability. The analysis can be performed either during the design process or during the operation time, with the purpose to improve the safety or the reliability. Due to plant complexity and safety and availability requirements, sophisticated tools, which are flexible and efficient, are needed. Such tools have been developed in the last 20 years and they have to be continuously refined to meet the growing requirements. Two different areas of application were analysed. In structural reliability probabilistic approaches have been introduced in some cases for the calculation of the reliability of structures or components. A new computer program has been developed based upon numerical integration in several variables. In systems reliability Monte Carlo simulation programs are used especially in analysis of very complex systems. In order to increase the applicability of the programs variance reduction techniques can be applied to speed up the calculation process. Variance reduction techniques have been studied and procedures for implementation of importance sampling are suggested. (author)

  17. Psychometric Properties of the Persian Version of the Social Anxiety - Acceptance and Action Questionnaire.

    Science.gov (United States)

    Soltani, Esmail; Bahrainian, Seyed Abdolmajid; Masjedi Arani, Abbas; Farhoudian, Ali; Gachkar, Latif

    2016-06-01

    Social anxiety disorder is often related to specific impairment or distress in different areas of life, including occupational, social and family settings. The purpose of the present study was to examine the psychometric properties of the persian version of the social anxiety-acceptance and action questionnaire (SA-AAQ) in university students. In this descriptive cross-sectional study, 324 students from Shahid Beheshti University of Medical Sciences participated via the cluster sampling method during year 2015. Factor analysis by the principle component analysis method, internal consistency analysis, and convergent and divergent validity were conducted to examine the validity of the SA-AAQ. To calculate the reliability of the SA-AAQ, Cronbach's alpha and test-retest reliability were used. The results from factor analysis by principle component analysis method yielded three factors that were named acceptance, action and non-judging of experience. The three-factor solution explained 51.82% of the variance. Evidence for the internal consistency of SA-AAQ was obtained via calculating correlations between SA-AAQ and its subscales. Support for convergent and discriminant validity of the SA-AAQ via its correlations with the acceptance and action questionnaire - II, social interaction anxiety scale, cognitive fusion questionnaire, believability of anxious feelings and thoughts questionnaire, valued living questionnaire and WHOQOL- BREF was obtained. The reliability of the SA-AAQ via calculating Cronbach's alpha and test-retest coefficients yielded values of 0.84 and 0.84, respectively. The Iranian version of the SA-AAQ has acceptable levels of psychometric properties in university students. The SA-AAQ is a valid and reliable measure to be utilized in research investigations and therapeutic interventions.

  18. Systems reliability/structural reliability

    International Nuclear Information System (INIS)

    Green, A.E.

    1980-01-01

    The question of reliability technology using quantified techniques is considered for systems and structures. Systems reliability analysis has progressed to a viable and proven methodology whereas this has yet to be fully achieved for large scale structures. Structural loading variants over the half-time of the plant are considered to be more difficult to analyse than for systems, even though a relatively crude model may be a necessary starting point. Various reliability characteristics and environmental conditions are considered which enter this problem. The rare event situation is briefly mentioned together with aspects of proof testing and normal and upset loading conditions. (orig.)

  19. The Feasibility, Acceptability, and Efficacy of Delivering Internet-Based Self-Help and Guided Self-Help Interventions for Generalized Anxiety Disorder to Indian University Students: Design of a Randomized Controlled Trial.

    Science.gov (United States)

    Kanuri, Nitya; Newman, Michelle G; Ruzek, Josef I; Kuhn, Eric; Manjula, M; Jones, Megan; Thomas, Neil; Abbott, Jo-Anne M; Sharma, Smita; Taylor, C Barr

    2015-12-11

    Generalized anxiety disorder (GAD) is one of the most common mental disorders among university students; however, many students go untreated due to treatment costs, stigma concerns, and limited access to trained mental health professionals. These barriers are heightened in universities in India, where there are scant mental health care services and severe stigma surrounding help seeking. To evaluate the feasibility, acceptability, and efficacy of Internet-based, or "online," cognitive behavioral therapy (CBT)-based unguided and guided self-help interventions (using the programs GAD Online and Lantern, respectively) to reduce GAD symptoms in students with clinical and subthreshold GAD and, ultimately, reduce the prevalence and incidence of GAD among the student population. Students will be recruited via 3 colleges in Hyderabad, India, and referred for a campus-wide online screening. Self-report data will be collected entirely online. A total of 300 qualifying students will be randomized in a 1:1:1 ratio to receive GAD Online, Lantern, or to be in a wait-list control condition, stratified by clinical and subthreshold GAD symptomatology. Students will complete a postintervention assessment after 3 months and a follow-up assessment 6 months later, at which point students in the wait-list control condition will receive one of the programs. The primary outcome is GAD symptom severity at 3 months postintervention. Secondary outcomes include GAD caseness at 9 months, other anxiety and depression symptoms, self-efficacy, and functional measures (eg, sleep, social functioning) at 3 and 9 months, respectively. Primary analyses will be differences between each of the intervention groups and the wait-list control group, analyzed on an intention-to-treat (ITT) basis using mixed-design ANOVA. The study commenced in February 2015. The sample was recruited over a 3-week period at each college. The trial is expected to end in December 2015. This trial will be the first to evaluate

  20. The Feasibility, Acceptability, and Efficacy of Delivering Internet-Based Self-Help and Guided Self-Help Interventions for Generalized Anxiety Disorder to Indian University Students: Design of a Randomized Controlled Trial

    Science.gov (United States)

    Newman, Michelle G; Ruzek, Josef I; Kuhn, Eric; Manjula, M; Jones, Megan; Thomas, Neil; Abbott, Jo-Anne M; Sharma, Smita; Taylor, C. Barr

    2015-01-01

    Background Generalized anxiety disorder (GAD) is one of the most common mental disorders among university students; however, many students go untreated due to treatment costs, stigma concerns, and limited access to trained mental health professionals. These barriers are heightened in universities in India, where there are scant mental health care services and severe stigma surrounding help seeking. Objective To evaluate the feasibility, acceptability, and efficacy of Internet-based, or “online,” cognitive behavioral therapy (CBT)-based unguided and guided self-help interventions (using the programs GAD Online and Lantern, respectively) to reduce GAD symptoms in students with clinical and subthreshold GAD and, ultimately, reduce the prevalence and incidence of GAD among the student population. Methods Students will be recruited via 3 colleges in Hyderabad, India, and referred for a campus-wide online screening. Self-report data will be collected entirely online. A total of 300 qualifying students will be randomized in a 1:1:1 ratio to receive GAD Online, Lantern, or to be in a wait-list control condition, stratified by clinical and subthreshold GAD symptomatology. Students will complete a postintervention assessment after 3 months and a follow-up assessment 6 months later, at which point students in the wait-list control condition will receive one of the programs. The primary outcome is GAD symptom severity at 3 months postintervention. Secondary outcomes include GAD caseness at 9 months, other anxiety and depression symptoms, self-efficacy, and functional measures (eg, sleep, social functioning) at 3 and 9 months, respectively. Primary analyses will be differences between each of the intervention groups and the wait-list control group, analyzed on an intention-to-treat (ITT) basis using mixed-design ANOVA. Results The study commenced in February 2015. The sample was recruited over a 3-week period at each college. The trial is expected to end in December 2015

  1. Reliability and validity of the student stress inventory-stress manifestations questionnaire and its association with personal and academic factors in university students.

    Science.gov (United States)

    Simonelli-Muñoz, Agustín J; Balanza, Serafín; Rivera-Caravaca, José Miguel; Vera-Catalán, Tomás; Lorente, Ana María; Gallego-Gómez, Juana I

    2018-05-01

    Stress affects us in every environment and it is also present in the educational sphere. Previous studies have reported a high prevalence of stress in university students. The Student Stress Inventory-Stress Manifestations (SSI-SM), identify stressors and evaluate stress manifestations in adolescents but its validity in university students remains uncertain. We aimed to determine the internal consistency and validity of an adapted version of the Student Stress Inventory-Stress Manifestations (SSI-SM) for university students and to investigate if high stress levels are associated with personal and academic factors. In this quantitative, descriptive, cross-sectional study, we included 115 university students of the Nursing Degree during the second semester of the 2014/2015 academic year. Information about personal issues, lifestyle and academic performance was recorded and the stress was evaluated with the SSI-SM questionnaire. The internal consistency and homogeneity of the SSI-SM questionnaire was tested and a factorial analysis was performed. After the homogeneity analysis, the final version of the SSI-SM questionnaire included 19 items, with a Cronbach's alpha of 0.924. In the factorial analysis, 4 factors were found ('Self-concept', 'Sociability', 'Uncertainty' and 'Somatization'; all Cronbach's alpha >0.700). Students with higher values on the SSI-SM were, in overall, women (41.0 ± 12.7 vs. 33.2 ± 9.5; p = 0.001) and had significantly more family conflicts (47.6 ± 13.8 vs. 35.2 ± 9.6; p < 0.001), consumed less alcohol (R = -0.184, p = 0.048), slept less hours (R = -0.193, p = 0.038) and had worse academic performance in Clinical Nursing (36.3 ± 10.4 vs. 41.2 ± 13.3, p = 0.039). After exclude three items of the original SSI-SM, higher scores in the SSI-SM are correlated with stress level in a cohort of university students of the Nursing Degree. Family conflicts, female gender, absence of alcohol

  2. Monitoring device acceptance in implantable cardioverter defibrillator patients using the Florida Patient Acceptance Survey

    DEFF Research Database (Denmark)

    Versteeg, Henneke; Starrenburg, Annemieke; Denollet, Johan

    2012-01-01

    Patient device acceptance might be essential in identifying patients at risk for adverse patient-reported outcomes following implantation of an implantable cardioverter defibrillator (ICD). We examined the validity and reliability of the Florida Patient Acceptance Scale (FPAS) and identified corr...

  3. Neck Flexor and Extensor Muscle Endurance in Subclinical Neck Pain: Intrarater Reliability, Standard Error of Measurement, Minimal Detectable Change, and Comparison With Asymptomatic Participants in a University Student Population.

    Science.gov (United States)

    Lourenço, Ana S; Lameiras, Carina; Silva, Anabela G

    2016-01-01

    The aims of this study were to assess intrarater reliability and to calculate the standard error of measurement (SEM) and minimal detectable change (MDC) for deep neck flexor and neck extensor muscle endurance tests, and compare the results between individuals with and without subclinical neck pain. Participants were students of the University of Aveiro reporting subclinical neck pain and asymptomatic participants matched for sex and age to the neck pain group. Data on endurance capacity of the deep neck flexors and neck extensors were collected by a blinded assessor using the deep neck flexor endurance test and the extensor endurance test, respectively. Intraclass correlation coefficients (ICCs), SEM, and MDC were calculated for measurements taken within a session by the same assessor. Differences between groups for endurance capacity were investigated using a Mann-Whitney U test. The deep neck flexor endurance test (ICC = 0.71; SEM = 6.91 seconds; MDC = 19.15 seconds) and neck extensor endurance test (ICC = 0.73; SEM = 9.84 minutes; MDC = 2.34 minutes) are reliable. No significant differences were found between participants with and without neck pain for both tests of muscle endurance (P > .05). The endurance capacity of the deep neck flexors and neck extensors can be reliably measured in participants with subclinical neck pain. However, the wide SEM and MDC might limit the sensitivity of these tests. Copyright © 2016. Published by Elsevier Inc.

  4. Microelectronics Reliability

    Science.gov (United States)

    2017-01-17

    inverters  connected in a chain. ................................................. 5  Figure 3  Typical graph showing frequency versus square root of...developing an experimental  reliability estimating methodology that could both illuminate the  lifetime  reliability of advanced devices,  circuits and...or  FIT of the device. In other words an accurate estimate of the device  lifetime  was found and thus the  reliability  that  can  be  conveniently

  5. External Validation and Evaluation of Reliability and Validity of the Modified Seoul National University Renal Stone Complexity Scoring System to Predict Stone-Free Status After Retrograde Intrarenal Surgery.

    Science.gov (United States)

    Park, Juhyun; Kang, Minyong; Jeong, Chang Wook; Oh, Sohee; Lee, Jeong Woo; Lee, Seung Bae; Son, Hwancheol; Jeong, Hyeon; Cho, Sung Yong

    2015-08-01

    The modified Seoul National University Renal Stone Complexity scoring system (S-ReSC-R) for retrograde intrarenal surgery (RIRS) was developed as a tool to predict stone-free rate (SFR) after RIRS. We externally validated the S-ReSC-R. We retrospectively reviewed 159 patients who underwent RIRS. The S-ReSC-R was assigned from 1 to 12 according to the location and number of sites involved. The stone-free status was defined as no evidence of a stone or with clinically insignificant residual fragment stones less than 2 mm. Interobserver and test-retest reliabilities were evaluated. Statistical performance of the prediction model was assessed by its predictive accuracy, predictive probability, and clinical usefulness. Overall SFR was 73.0%. The SFRs were 86.7%, 70.2%, and 48.6% in low-score (1-2), intermediate-score (3-4), and high-score (5-12) groups, respectively (pR revealed an area under the curve (AUC) of 0.731 (95% CI 0.650-0.813). The AUC of the three-titered S-ReSC-R was 0.701 (95% CI 0.609-0.794). The calibration plot showed that the predicted probability of SFR had a concordance comparable to that of observed frequency. The Hosmer-Lemeshow goodness of fit test revealed a p-value of 0.01 for the S-ReSC-R and 0.90 for the three-titered S-ReSC-R. Interobserver and test-retest reliabilities revealed an almost perfect level of agreement. The present study proved the predictive value of S-ReSC-R to predict SFR following RIRS in an independent cohort. Interobserver and test-retest reliabilities confirmed that S-ReSC-R was reliable and valid.

  6. Burnout Syndrome Among Medical Students at One University in Serbia: Validity and Reliability of the Maslach Burnout Inventory-Student Survey.

    Science.gov (United States)

    Ilic, Milena; Todorovic, Zeljko; Jovanovic, Milena; Ilic, Irena

    2017-01-01

    The Maslach Burnout Inventory-Student Survey (MBI-SS) contains 15 items that evaluate the following burnout dimensions: Emotional Exhaustion, Cynicism, and Academic Efficacy. The purpose of this study was to evaluate the dimensionality of the MBI-SS on a sample of Serbian medical students (N = 760). The overall Cronbach's α coefficient of the MBI-SS questionnaire was 0.757, while the Cronbach's α coefficients for Emotional Exhaustion, Cynicism, and Academic Efficacy were 0.869, 0.856, and 0.852, respectively. Principal Component Analysis with Oblimin rotation indicated 3 main components that explained 64.9% variance. The confirmatory factor analysis revealed good fit indices (χ 2 /df = 575.74/87, RMSEA = 0.086 (90% Confidence Interval for RMSEA = 0.079 to 0.092), CFI = 0.949, NNFI = 0.939, IFI = 0.949, GFI = 0.904) of the MBI-SS scale. The Serbian version of MBI-SS represents a valid and reliable instrument in the Serbian sample of medical students.

  7. Reliability and validity of television food advertising questionnaire in Malaysia.

    Science.gov (United States)

    Zalma, Abdul Razak; Safiah, Md Yusof; Ajau, Danis; Khairil Anuar, Md Isa

    2015-09-01

    Interventions to counter the influence of television food advertising amongst children are important. Thus, reliable and valid instrument to assess its effect is needed. The objective of this study was to determine the reliability and validity of such a questionnaire. The questionnaire was administered twice on 32 primary schoolchildren aged 10-11 years in Selangor, Malaysia. The interval between the first and second administration was 2 weeks. Test-retest method was used to examine the reliability of the questionnaire. Intra-rater reliability was determined by kappa coefficient and internal consistency by Cronbach's alpha coefficient. Construct validity was evaluated using factor analysis. The test-retest correlation showed moderate-to-high reliability for all scores (r = 0.40*, p = 0.02 to r = 0.95**, p = 0.00), with one exception, consumption of fast foods (r = 0.24, p = 0.20). Kappa coefficient showed acceptable-to-strong intra-rater reliability (K = 0.40-0.92), except for two items under knowledge on television food advertising (K = 0.26 and K = 0.21) and one item under preference for healthier foods (K = 0.33). Cronbach's alpha coefficient indicated acceptable internal consistency for all scores (0.45-0.60). After deleting two items under Consumption of Commonly Advertised Food, the items showed moderate-to-high loading (0.52, 0.84, 0.42 and 0.42) with the Scree plot showing that there was only one factor. The Kaiser-Meyer-Olkin was 0.60, showing that the sample was adequate for factor analysis. The questionnaire on television food advertising is reliable and valid to assess the effect of media literacy education on television food advertising on schoolchildren. © The Author (2013). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Measuring and Promoting Acceptance of Young Children with Disabilities.

    Science.gov (United States)

    Favazza, Paddy C.; Phillipsen, Leslie; Kumar, Poonam

    2000-01-01

    Results of two studies indicate the Acceptance Scale for Kindergartners was reliable with a sample of minority, low socioeconomic status children and that children exposed to all of the components of an intervention designed to promote acceptance of young children with disabilities had short-term and long-term gains in acceptance. (Contains…

  9. Waste package reliability analysis

    International Nuclear Information System (INIS)

    Pescatore, C.; Sastre, C.

    1983-01-01

    Proof of future performance of a complex system such as a high-level nuclear waste package over a period of hundreds to thousands of years cannot be had in the ordinary sense of the word. The general method of probabilistic reliability analysis could provide an acceptable framework to identify, organize, and convey the information necessary to satisfy the criterion of reasonable assurance of waste package performance according to the regulatory requirements set forth in 10 CFR 60. General principles which may be used to evaluate the qualitative and quantitative reliability of a waste package design are indicated and illustrated with a sample calculation of a repository concept in basalt. 8 references, 1 table

  10. Redefining reliability

    International Nuclear Information System (INIS)

    Paulson, S.L.

    1995-01-01

    Want to buy some reliability? The question would have been unthinkable in some markets served by the natural gas business even a few years ago, but in the new gas marketplace, industrial, commercial and even some residential customers have the opportunity to choose from among an array of options about the kind of natural gas service they need--and are willing to pay for. The complexities of this brave new world of restructuring and competition have sent the industry scrambling to find ways to educate and inform its customers about the increased responsibility they will have in determining the level of gas reliability they choose. This article discusses the new options and the new responsibilities of customers, the needed for continuous education, and MidAmerican Energy Company's experiment in direct marketing of natural gas

  11. Modified personal interviews: resurrecting reliable personal interviews for admissions?

    Science.gov (United States)

    Hanson, Mark D; Kulasegaram, Kulamakan Mahan; Woods, Nicole N; Fechtig, Lindsey; Anderson, Geoff

    2012-10-01

    Traditional admissions personal interviews provide flexible faculty-student interactions but are plagued by low inter-interview reliability. Axelson and Kreiter (2009) retrospectively showed that multiple independent sampling (MIS) may improve reliability of personal interviews; thus, the authors incorporated MIS into the admissions process for medical students applying to the University of Toronto's Leadership Education and Development Program (LEAD). They examined the reliability and resource demands of this modified personal interview (MPI) format. In 2010-2011, LEAD candidates submitted written applications, which were used to screen for participation in the MPI process. Selected candidates completed four brief (10-12 minutes) independent MPIs each with a different interviewer. The authors blueprinted MPI questions to (i.e., aligned them with) leadership attributes, and interviewers assessed candidates' eligibility on a five-point Likert-type scale. The authors analyzed inter-interview reliability using the generalizability theory. Sixteen candidates submitted applications; 10 proceeded to the MPI stage. Reliability of the written application components was 0.75. The MPI process had overall inter-interview reliability of 0.79. Correlation between the written application and MPI scores was 0.49. A decision study showed acceptable reliability of 0.74 with only three MPIs scored using one global rating. Furthermore, a traditional admissions interview format would take 66% more time than the MPI format. The MPI format, used during the LEAD admissions process, achieved high reliability with minimal faculty resources. The MPI format's reliability and effective resource use were possible through MIS and employment of expert interviewers. MPIs may be useful for other admissions tasks.

  12. Validity and Reliability of the 8-Item Work Limitations Questionnaire.

    Science.gov (United States)

    Walker, Timothy J; Tullar, Jessica M; Diamond, Pamela M; Kohl, Harold W; Amick, Benjamin C

    2017-12-01

    Purpose To evaluate factorial validity, scale reliability, test-retest reliability, convergent validity, and discriminant validity of the 8-item Work Limitations Questionnaire (WLQ) among employees from a public university system. Methods A secondary analysis using de-identified data from employees who completed an annual Health Assessment between the years 2009-2015 tested research aims. Confirmatory factor analysis (CFA) (n = 10,165) tested the latent structure of the 8-item WLQ. Scale reliability was determined using a CFA-based approach while test-retest reliability was determined using the intraclass correlation coefficient. Convergent/discriminant validity was tested by evaluating relations between the 8-item WLQ with health/performance variables for convergent validity (health-related work performance, number of chronic conditions, and general health) and demographic variables for discriminant validity (gender and institution type). Results A 1-factor model with three correlated residuals demonstrated excellent model fit (CFI = 0.99, TLI = 0.99, RMSEA = 0.03, and SRMR = 0.01). The scale reliability was acceptable (0.69, 95% CI 0.68-0.70) and the test-retest reliability was very good (ICC = 0.78). Low-to-moderate associations were observed between the 8-item WLQ and the health/performance variables while weak associations were observed between the demographic variables. Conclusions The 8-item WLQ demonstrated sufficient reliability and validity among employees from a public university system. Results suggest the 8-item WLQ is a usable alternative for studies when the more comprehensive 25-item WLQ is not available.

  13. Responsible technology acceptance

    DEFF Research Database (Denmark)

    Toft, Madeleine Broman; Schuitema, Geertje; Thøgersen, John

    2014-01-01

    As a response to climate change and the desire to gain independence from imported fossil fuels, there is a pressure to increase the proportion of electricity from renewable sources which is one of the reasons why electricity grids are currently being turned into Smart Grids. In this paper, we focus...... on private consumers’ acceptance of having Smart Grid technology installed in their home. We analyse acceptance in a combined framework of the Technology Acceptance Model and the Norm Activation Model. We propose that individuals are only likely to accept Smart Grid technology if they assess usefulness...... in terms of a positive impact for society and the environment. Therefore, we expect that Smart Grid technology acceptance can be better explained when the well-known technology acceptance parameters included in the Technology Acceptance Model are supplemented by moral norms as suggested by the Norm...

  14. HPS simulation and acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Mundim, Luiz Martins [UERJ, Rio de Janeiro, RJ (Brazil); Pol, Maria Elena [CBPF, Rio de Janeiro, RJ (Brazil)

    2013-07-01

    Full text: The High Precision Spectrometer (HPS) is a proposal of sub-detector to be installed in the region of 200-240m from each side of CMS along the LHC beam-line to measure scattered protons from exclusive centrally produced processes, pp → p + X + p. In order to study the protons that reach the detectors, the beam-line of the LHC accelerator has to be taken into account, as the particles are deflected by dipoles and suffer the influence of quadrupoles and other beam devices. The LHC team provides a detailed description of these elements, currents, energies, magnetic fields, and all the information needed to study the propagation of the protons. The program HECTOR, developed at the University of Louvain, uses the information from LHC to calculate at any point along the beam-line the kinematic quantities that characterize the scattered protons. A simple minded program was initially developed for the preliminary studies of acceptances varying the position and size of the foreseen detectors. Also, it took into account vertex and position smearing, to simulate a realistic resolution of the tracking detectors. These studies were performed using a particle gun generator which shoot protons from the IP within reasonable ranges of possible t and ξ (the square of the four-momentum transfer and the fractional energy loss of the outgoing proton in a diffractive collision), and propagated them to the position of the tracking detectors. These kinematic quantities were reconstructed back at the IP using the transport equations from HECTOR. This simplified simulation was afterwards interfaced with the full software of CMS, CMSSW, in such a way that when a diffractive event was fully simulated and reconstructed in the central detector, the outgoing protons were treated by the HPS software and then the complete (CMS+HPS) event was output. The ExHuME generator was used to produce Monte Carlo simulations to study the mass acceptance of the HPS detector, and central and

  15. Measuring Technology Acceptance Level of Turkish Pre-Service English Teachers by Using Technology Acceptance Model

    Science.gov (United States)

    Kirmizi, Özkan

    2014-01-01

    The aim of this study is to investigate technology acceptance of prospective English teachers by using Technology Acceptance Model (TAM) in Turkish context. The study is based on Structural Equation Model (SEM). The participants of the study from English Language Teaching Departments of Hacettepe, Gazi and Baskent Universities. The participants…

  16. Investigating Students' Acceptance of a Statistics Learning Platform Using Technology Acceptance Model

    Science.gov (United States)

    Song, Yanjie; Kong, Siu-Cheung

    2017-01-01

    The study aims at investigating university students' acceptance of a statistics learning platform to support the learning of statistics in a blended learning context. Three kinds of digital resources, which are simulations, online videos, and online quizzes, were provided on the platform. Premised on the technology acceptance model, we adopted a…

  17. The Danish anal sphincter rupture questionnaire: Validity and reliability

    DEFF Research Database (Denmark)

    Due, Ulla; Ottesen, Marianne

    2008-01-01

    Objective. To revise, validate and test for reliability an anal sphincter rupture questionnaire in relation to construct, content and face validity. Setting and background. Since 1996 women with anal sphincter rupture (ASR) at one of the public university hospitals in Copenhagen, Denmark have been...... main questions but one. Two questions needed further explanation. Seven women made minor errors. Conclusion. The validated Danish questionnaire has a good construct, content and face validity. It is a well accepted, reliable, simple and clinically relevant screening tool. It reveals physical problems...... offered pelvic floor muscle examination and instruction by a specialist physiotherapist. In relation to that, a non-validated questionnaire about anal and urinary incontinence was to be answered six months after childbirth. Method. The original questionnaire was revised and a pilot test was performed...

  18. Student acceptance of blended learning in Nigeria: a case study of ...

    African Journals Online (AJOL)

    Student acceptance of blended learning in Nigeria: a case study of Landmark University. ... instrument and the acceptance of blended learning was tested using UTAUT model. ... Keywords: Blended learning, UTAUT, technology acceptance ...

  19. An Introduction To Reliability

    International Nuclear Information System (INIS)

    Park, Kyoung Su

    1993-08-01

    This book introduces reliability with definition of reliability, requirement of reliability, system of life cycle and reliability, reliability and failure rate such as summary, reliability characteristic, chance failure, failure rate which changes over time, failure mode, replacement, reliability in engineering design, reliability test over assumption of failure rate, and drawing of reliability data, prediction of system reliability, conservation of system, failure such as summary and failure relay and analysis of system safety.

  20. African Universities Need Affordable and Reliable Broadband ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-10-12

    Oct 12, 2010 ... But it's a different story in most parts of Africa, where limited library ... on effective and affordable information and communication technology (ICT) ... who are using open-source software that complies with international open ...

  1. Reliability and validity of the Mywellness Key physical activity monitor

    Directory of Open Access Journals (Sweden)

    Sieverdes JC

    2013-01-01

    Full Text Available John C Sieverdes,1 Eric E Wickel,2 Gregory A Hand,3 Marco Bergamin,4 Robert R Moran,5 Steven N Blair3,51Medical University of South Carolina, College of Nursing and Medicine, Charleson, SC, 2University of Tulsa, Exercise and Sport Science, Tulsa, OK, 3University of South Carolina, Department of Exercise Science, Division of Health Aspects of Physical Activity, Arnold School of Public Health, Columbia, SC, USA; 4University of Padova, Department of Medicine, Sports Medicine Division, Padova, Italy; 5University of South Carolina, Department of Epidemiology and Biostatistics, Arnold School of Public Health, Columbia, SC, USABackground: This study evaluated the reliability and criterion validity of the Mywellness Key accelerometer (MWK using treadmill protocols and indirect calorimetry.Methods: Twenty-five participants completed two four-stage 20-minute treadmill protocols while wearing two MWK accelerometers. Reliability was assessed using raw counts. Validity was assessed by comparing the estimated VO2 calculated from the MWK with values from respiratory gas exchange.Results: Good overall and point estimates of reliability were found for the MWK (all intraclass correlations > 0.93. Generalizability theory coefficients showed lower values for running speed (0.70 versus walking speed (all > 0.84, with the majority of the overall percentage of variability derived from the participant (68%–88% of the total 100%. Acceptable validity was found overall (Pearson’s r = 0.895–0.902, P < 0.0001, with an overall mean absolute error of 16.22% and a coefficient of variance of 16.92%. Bland-Altman plots showed an overestimation of energy expenditure during the running speed, but total kilocalories were underestimated during the protocol by approximately 10%.Conclusion: Good validity was found during light and moderate walking, while running was slightly overestimated. The MWK may be useful for clinicians and researchers interested in promotion or assessment

  2. Acceptance procedures: Microfilm printer

    Science.gov (United States)

    Lockwood, H. E.

    1973-01-01

    Acceptance tests were made for a special order automatic additive color microfilm printer. Tests include film capacity, film transport, resolution, illumination uniformity, exposure range checks, and color cuing considerations.

  3. On risks and acceptability

    International Nuclear Information System (INIS)

    Watson, S.R.

    1981-01-01

    A very attractive notion is that it should be possible not only to determine how much risk is associated with any particular activity, but also to determine if that risk is acceptable. Stated boldly this seems an entirely unobjectionable and indeed a very acceptable notion. There is, however, underlying this idea, a mistaken view of risk which we might refer to as the ''phlogiston'' theory of risk. In this paper, presented at the SRP meeting on Ethical and Legal Aspects of Radiological Protection, the phlogiston theory of risk is described; secondly, it will be argued that it is too simple a theory to be realistic or useful; and thirdly, the management of risk will be placed in a wider decision framework. Acceptability, it will be argued is highly dependent on context, and it is not possible, therefore, to lay down generally applicable notions of acceptability. (author)

  4. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjects...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  5. Operations Acceptance Management

    OpenAIRE

    Suchá, Ivana

    2010-01-01

    This paper examines the process of Operations Acceptance Management, whose main task is to control Operations Acceptance Tests (OAT). In the first part the author focuses on the theoretical ground for the problem in the context of ITSM best practices framework ITIL. Benefits, process pitfalls and possibilities for automation are discussed in this part. The second part contains a case study of DHL IT Services (Prague), where a solution optimizing the overall workflow was implemented using simp...

  6. Acceptable noise level

    DEFF Research Database (Denmark)

    Olsen, Steen Østergaard; Nielsen, Lars Holme; Lantz, Johannes

    2012-01-01

    The acceptable noise level (ANL) is used to quantify the amount of background noise that subjects can accept while listening to speech, and is suggested for prediction of individual hearing-aid use. The aim of this study was to assess the repeatability of the ANL measured in normal-hearing subjec...... using running Danish and non-semantic speech materials as stimuli and modulated speech-spectrum and multi-talker babble noises as competing stimuli....

  7. Web accessibility of public universities in Andalusia

    Directory of Open Access Journals (Sweden)

    Luis Alejandro Casasola Balsells

    2017-06-01

    Full Text Available This paper describes an analysis conducted in 2015 to evaluate the accessibility of content on Andalusian public university websites. In order to determinate whether these websites are accessible, an assessment has been carried out to check conformance with the latest Web Content Accessibility Guidelines (WCAG 2.0 established by the World Wide Web Consortium (W3C. For this purpose, we have designed a methodology for analysis that combines the use of three automatic tools (eXaminator, MINHAP web accessibility tool, and TAW with a manual analysis to provide a greater reliability and validity of the results. Although the results are acceptable overall, a detailed analysis shows that more is still needed for achieving full accessibility for the entire university community. In this respect, we suggest several corrections to common accessibility errors for facilitating the design of university web portals.

  8. Load Control System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Trudnowski, Daniel [Montana Tech of the Univ. of Montana, Butte, MT (United States)

    2015-04-03

    This report summarizes the results of the Load Control System Reliability project (DOE Award DE-FC26-06NT42750). The original grant was awarded to Montana Tech April 2006. Follow-on DOE awards and expansions to the project scope occurred August 2007, January 2009, April 2011, and April 2013. In addition to the DOE monies, the project also consisted of matching funds from the states of Montana and Wyoming. Project participants included Montana Tech; the University of Wyoming; Montana State University; NorthWestern Energy, Inc., and MSE. Research focused on two areas: real-time power-system load control methodologies; and, power-system measurement-based stability-assessment operation and control tools. The majority of effort was focused on area 2. Results from the research includes: development of fundamental power-system dynamic concepts, control schemes, and signal-processing algorithms; many papers (including two prize papers) in leading journals and conferences and leadership of IEEE activities; one patent; participation in major actual-system testing in the western North American power system; prototype power-system operation and control software installed and tested at three major North American control centers; and, the incubation of a new commercial-grade operation and control software tool. Work under this grant certainly supported the DOE-OE goals in the area of “Real Time Grid Reliability Management.”

  9. Development and Validation of Mobile Learning Acceptance Measure

    Science.gov (United States)

    Sharma, Sujeet Kumar; Sarrab, Mohamed; Al-Shihi, Hafedh

    2017-01-01

    The growth of Smartphone usage, increased acceptance of electronic learning (E-learning), the availability of high reliability mobile networks and need for flexibility in learning have resulted in the growth of mobile learning (M-learning). This has led to a tremendous interest in the acceptance behaviors related to M-learning users among the…

  10. Frontiers of reliability

    CERN Document Server

    Basu, Asit P; Basu, Sujit K

    1998-01-01

    This volume presents recent results in reliability theory by leading experts in the world. It will prove valuable for researchers, and users of reliability theory. It consists of refereed invited papers on a broad spectrum of topics in reliability. The subjects covered include Bayesian reliability, Bayesian reliability modeling, confounding in a series system, DF tests, Edgeworth approximation to reliability, estimation under random censoring, fault tree reduction for reliability, inference about changes in hazard rates, information theory and reliability, mixture experiment, mixture of Weibul

  11. Reliability Analysis of Money Habitudes

    Science.gov (United States)

    Delgadillo, Lucy M.; Bushman, Brittani S.

    2015-01-01

    Use of the Money Habitudes exercise has gained popularity among various financial professionals. This article reports on the reliability of this resource. A survey administered to young adults at a western state university was conducted, and each Habitude or "domain" was analyzed using Cronbach's alpha procedures. Results showed all six…

  12. School Choice Acceptance: An Exploratory Explication

    Science.gov (United States)

    Koven, Steven G.; Khan, Mobin

    2014-01-01

    School choice is presented by some as a panacea to the challenges facing education in the United States. Acceptance of choice as a solution, however, is far from universal. This article examines two possible contributors to choice adoption: ideology and political culture. Political culture was found to better explain the complex phenomenon of…

  13. User acceptance of a picture archiving and communication system. Applying the unified theory of acceptance and use of technology in a radiological setting.

    Science.gov (United States)

    Duyck, P; Pynoo, B; Devolder, P; Voet, T; Adang, L; Vercruysse, J

    2008-01-01

    The aim of this study is to gain insight into the individual user acceptance of PACS by the radiology department staff of the Ghent University Hospital. Hereto a basic--direct effects only--form of UTAUT was assessed. Ninety-four questionnaires were distributed and 56 usable questionnaires were returned (19 radiologists - 37 technologists). The questionnaire consisted of scales of Venkatesh et al. [13] for performance expectancy (PE), effort expectancy (EE), facilitating conditions (FC), social influence (SI), self-efficacy (SE), attitude (ATT), anxiety (ANX) and behavioral intention (BI), and a scale of Moore et al. [22] to assess the perceived voluntariness of PACS-use. The reliability of all scales, except FC and voluntariness, was acceptable to good. The voluntariness scale was divided into a mandatoriness (MAN) and a voluntariness (VOL) measure. Both radiologists and technologists seem to welcome PACS, with radiologists having higher ratings on PE, EE, ATT, VOL and BI. Only PE and FC were salient for predicting BI, while EE and SI were not salient. Variance explained in behavioral intention to use PACS was 48%. Both radiologists and technologists were positive towards PACS and had strong intentions to use PACS. As other healthcare professionals, they appear to make their technology acceptance decision independent from their superiors, hereby focusing on usefulness rather than on ease of use. It is also important that support is supplied. Basic UTAUT is an adequate model to assess technology acceptance in a radiological setting.

  14. Inter- and Intraexaminer Reliability in Identifying and Classifying Myofascial Trigger Points in Shoulder Muscles.

    Science.gov (United States)

    Nascimento, José Diego Sales do; Alburquerque-Sendín, Francisco; Vigolvino, Lorena Passos; Oliveira, Wandemberg Fortunato de; Sousa, Catarina de Oliveira

    2018-01-01

    To determine inter- and intraexaminer reliability of examiners without clinical experience in identifying and classifying myofascial trigger points (MTPs) in the shoulder muscles of subjects asymptomatic and symptomatic for unilateral subacromial impact syndrome (SIS). Within-day inter- and intraexaminer reliability study. Physical therapy department of a university. Fifty-two subjects participated in the study, 26 symptomatic and 26 asymptomatic for unilateral SIS. Two examiners, without experience for assessing MTPs, independent and blind to the clinical conditions of the subjects, assessed bilaterally the presence of MTPs (present or absent) in 6 shoulder muscles and classified them (latent or active) on the affected side of the symptomatic group. Each examiner performed the same assessment twice in the same day. Reliability was calculated through percentage agreement, prevalence- and bias-adjusted kappa (PABAK) statistics, and weighted kappa. Intraexaminer reliability in identifying MTPs for the symptomatic and asymptomatic groups was moderate to perfect (PABAK, .46-1 and .60-1, respectively). Interexaminer reliability was between moderate and almost perfect in the 2 groups (PABAK, .46-.92), except for the muscles of the symptomatic group, which were below these values. With respect to MTP classification, intraexaminer reliability was moderate to high for most muscles, but interexaminer reliability was moderate for only 1 muscle (weighted κ=.45), and between weak and reasonable for the rest (weighted κ=.06-.31). Intraexaminer reliability is acceptable in clinical practice to identify and classify MTPs. However, interexaminer reliability proved to be reliable only to identify MTPs, with the symptomatic side exhibiting lower values of reliability. Copyright © 2017 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  15. 1991 Acceptance priority ranking

    International Nuclear Information System (INIS)

    1991-12-01

    The Standard Contract for Disposal of Spent Nuclear Fuel and/or High- Level Radioactive Waste (10 CFR Part 961) that the Department of Energy (DOE) has executed with the owners and generators of civilian spent nuclear fuel requires annual publication of the Acceptance Priority Ranking (APR). The 1991 APR details the order in which DOE will allocate Federal waste acceptance capacity. As required by the Standard Contract, the ranking is based on the age of permanently discharged spent nuclear fuel (SNF), with the owners of the oldest SNF, on an industry-wide basis, given the highest priority. the 1991 APR will be the basis for the annual allocation of waste acceptance capacity to the Purchasers in the 1991 Annual Capacity Report (ACR), to be issued later this year. This document is based on SNF discharges as of December 31, 1990, and reflects Purchaser comments and corrections, as appropriate, to the draft APR issued on May 15, 1991

  16. The reliability of the Manchester Triage System (MTS): a meta-analysis.

    Science.gov (United States)

    Mirhaghi, Amir; Mazlom, Reza; Heydari, Abbas; Ebrahimi, Mohsen

    2017-05-01

    Although the Manchester Triage System (MTS) was first developed two decades ago, the reliability of the MTS has not been questioned through comparison with a moderating variable; therefore, the aim of this study is to determine the extent of the reliability of MTS using a meta-analytic review. Electronic databases were searched up to 1 March 2014. Studies were only included if they had reported sample sizes, reliability coefficients, and adequate description of the reliability assessment. The Guidelines for Reporting Reliability and Agreement Studies was used. Two reviewers independently examined abstracts and extracted data. The effect size was obtained by the z-transformation of reliability coefficients. Data were pooled with random-effects models, and meta-regression was performed based on the method-of-moments estimator. Seven studies were included. The pooled coefficient for the MTS was substantial at 0.751 (CI 95%: 0.677 to 0.810); the incidence of mistriage is greater than 50%. Agreement is higher for the latest version of MTS (for adults) among nurse-experts and in countries in closer proximity to the country of MTS origin (the UK, in Manchester) than for the oldest (pediatric) version, nurse-nurse raters, and countries at a greater distance from the UK. The MTS showed an acceptable level of overall reliability in the emergency department, but more development is required to attain almost perfect agreement. © 2016 Chinese Cochrane Center, West China Hospital of Sichuan University and John Wiley & Sons Australia, Ltd.

  17. Understanding social acceptance of electricity generation sources

    International Nuclear Information System (INIS)

    Bronfman, Nicolás C.; Jiménez, Raquel B.; Arévalo, Pilar C.; Cifuentes, Luis A.

    2012-01-01

    Social acceptability is a determinant factor in the failure or success of the government's decisions about which electricity generation sources will satisfy the growing demand for energy. The main goal of this study was to validate a causal trust-acceptability model for electricity generation sources. In the model, social acceptance of an energy source is directly caused by perceived risk and benefit and also by social trust in regulatory agencies (both directly and indirectly, through perceived risk and benefit). Results from a web-based survey of Chilean university students demonstrated that data for energy sources that are controversial in Chilean society (fossil fuels, hydro, and nuclear power) fit the hypothesized model, whereas data for non conventional renewable energy sources (solar, wind, geothermal and tidal) did not. Perceived benefit had the greatest total effect on acceptability, thus emerging as a key predictive factor of social acceptability of controversial electricity generation sources. Further implications for regulatory agencies are discussed. - Highlights: ► We tested a causal trust-acceptability model for electricity generation sources in Chile. ► Data for controversial energy sources in the Chilean society (fossil fuels, hydro and nuclear power) fit the hypothesized model. ► Data for non conventional renewable energy sources did not fit the data. ► Perceived benefit showed the greatest total effect on acceptability.

  18. System Reliability Engineering

    International Nuclear Information System (INIS)

    Lim, Tae Jin

    2005-02-01

    This book tells of reliability engineering, which includes quality and reliability, reliability data, importance of reliability engineering, reliability and measure, the poisson process like goodness of fit test and the poisson arrival model, reliability estimation like exponential distribution, reliability of systems, availability, preventive maintenance such as replacement policies, minimal repair policy, shock models, spares, group maintenance and periodic inspection, analysis of common cause failure, and analysis model of repair effect.

  19. Displacement compressors - acceptance tests

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    ISO 1217:2009 specifies methods for acceptance tests regarding volume rate of flow and power requirements of displacement compressors. It also specifies methods for testing liquid-ring type compressors and the operating and testing conditions which apply when a full performance test is specified.

  20. From motivation to acceptability

    DEFF Research Database (Denmark)

    Nordfalk, Francisca; Olejaz, Maria; Jensen, Anja M. B.

    2016-01-01

    Background: Over the past three decades, public attitudes to organ donation have been a subject of numerous studies focusing on donor motivation. Here, we present a fresh approach. We suggest focusing on public acceptability instead of motivation. The point is to understand public attitudes well...

  1. Approaches to acceptable risk

    International Nuclear Information System (INIS)

    Whipple, C.

    1997-01-01

    Several alternative approaches to address the question open-quotes How safe is safe enough?close quotes are reviewed and an attempt is made to apply the reasoning behind these approaches to the issue of acceptability of radiation exposures received in space. The approaches to the issue of the acceptability of technological risk described here are primarily analytical, and are drawn from examples in the management of environmental health risks. These include risk-based approaches, in which specific quantitative risk targets determine the acceptability of an activity, and cost-benefit and decision analysis, which generally focus on the estimation and evaluation of risks, benefits and costs, in a framework that balances these factors against each other. These analytical methods tend by their quantitative nature to emphasize the magnitude of risks, costs and alternatives, and to downplay other factors, especially those that are not easily expressed in quantitative terms, that affect acceptance or rejection of risk. Such other factors include the issues of risk perceptions and how and by whom risk decisions are made

  2. Insights from a reliability review of digital plant protection system

    International Nuclear Information System (INIS)

    Kim, I.S.; Hwang, S.W.; Kim, B.S.; Jeong, C.H.; Oh, S.H.

    2001-01-01

    The full text follows: As part of the design efforts for Ulchin nuclear power plant units 5 and 6 of Korea, a reliability analysis of digital plant protection system (DPPS) was performed by ABB-CE. An independent review of the DPPS reliability analysis was undertaken by Hanyang University to assist Korea Institute of Nuclear Safety (KINS), the nuclear regulatory body of Korea, in evaluating the design acceptability of the digital system. The DPPS is designed to encompass both reactor trip function and ESFAS (engineered safety feature actuation system) initiation function. The major methods used by the ABB-CE to assess the Ulchin 5-6 DPPS reliability are failure mode and effect analysis (FMEA) and fault tree analysis. Hence, our independent review was conducted focusing on: -) the establishment of review criteria based on various sources, such as the standard review plan of KINS, 10CFR50 Appendix A, IEEE standards 279, 577, and 603; -) the suitability of the FMEA and fault tree analysis for the Ulchin 5-6 DPPS, including the specific methods used (e.g., for human reliability analysis and common-cause failure analysis), the assumptions made (e.g., with respect to test frequency and watchdog timer coverage), and the data employed (e.g., CCF parameter, human error probability, and processor failure rate); and -) the design acceptability of the DPPS especially as compared to the analog plant protection system from a reliability and safety perspective. The paper shall also discuss key issues requiring further in-depth investigation, such as reliability of programmable logic controllers (PLCs), coverage factor of watchdog timers, and susceptibility of redundant digital units to common cause failure. Sensitivity analyses were carried out to investigate the impact of several parameters of special interest, like the coverage factor of watchdog timer and human error probability (e.g. an operator error to manually trip the reactor, or to mis-calibrate the trip parameters) on

  3. Safety and reliability in Europe

    International Nuclear Information System (INIS)

    Colombo, A.G.

    1985-01-01

    This volume contains the papers presented at the ESRA Pre-Launching Meeting. The meeting was attended by about eighty European reliability and safety experts from industry, research organizations and universities. This meeting was dealing with the following subjects: the historical perspective of safety and reliability in Europe and to the aims of ESRA. Status and Trends in Research and Development; Codes, Standards and Regulations; Academic and Technical Training. National and international Organizations. Twenty six papers have been analyzed and abstracted for inclusion in the data base

  4. Performance Measurement at Universities

    DEFF Research Database (Denmark)

    Lueg, Klarissa

    2014-01-01

    This paper proposes empirical approaches to testing the reliability, validity, and organizational effectiveness of student evaluations of teaching (SET) as a performance measurement instrument in knowledge management at the institutional level of universities. Departing from Weber’s concept...

  5. Waste acceptance and logistics

    International Nuclear Information System (INIS)

    Carlson, James H.

    1992-01-01

    There are three major components which are normally highlighted when the Civilian Radioactive Waste Management Program is discussed - the repository, the monitored retrievable storage facility, and the transportation system. These are clearly the major physical system elements and they receive the greatest external attention. However, there will not be a successful, operative waste management system without fully operational waste acceptance plans and logistics arrangements. This paper will discuss the importance of developing, on a parallel basis to the normally considered waste management system elements, the waste acceptance and logistics arrangements to enable the timely transfer of spent nuclear fuel from more than one hundred and twenty waste generators to the Federal government. The paper will also describe the specific activities the Program has underway to make the necessary arrangements. (author)

  6. Fatigue Reliability of Offshore Wind Turbine Systems

    DEFF Research Database (Denmark)

    Marquez-Dominguez, Sergio; Sørensen, John Dalsgaard

    2012-01-01

    of appropriate partial safety factors / fatigue design factors (FDF) for steel substructures of offshore wind turbines (OWTs). The fatigue life is modeled by the SN approach. Design and limit state equations are established based on the accumulated fatigue damage. The acceptable reliability level for optimal...... fatigue design of OWTs is discussed and results for reliability assessment of typical fatigue critical design of offshore steel support structures are presented....

  7. Environment and public acceptance

    International Nuclear Information System (INIS)

    Gauvenet; Bresson; Braillard; Ertaud; Ladonchamps, de; Toureau

    1976-01-01

    The problems involved in the siting of nuclear power stations at a local level are of a political economic, social or ecological order. The acceptance of a nuclear station mostly depends on its interest for the local population. In order to avoid negative reactions, the men who are responsible must make the harmonious integration of the station within the existing economic and social context their first priority [fr

  8. Nuclear power and acceptation

    International Nuclear Information System (INIS)

    Speelman, J.E.

    1990-01-01

    In 1989 a workshop was held organized by the IAEA and the Argonne National Laboratory. The purpose was to investigate under which circumstances a large-scale extension of nuclear power can be accepted. Besides the important technical information, the care for the environment determined the atmosphere during the workshop. The opinion dominated that nuclear power can contribute in tackling the environment problems, but that the social and political climate this almost makes impossible. (author). 7 refs.; 1 fig.; 1 tab

  9. Developing Reliable Life Support for Mars

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    A human mission to Mars will require highly reliable life support systems. Mars life support systems may recycle water and oxygen using systems similar to those on the International Space Station (ISS). However, achieving sufficient reliability is less difficult for ISS than it will be for Mars. If an ISS system has a serious failure, it is possible to provide spare parts, or directly supply water or oxygen, or if necessary bring the crew back to Earth. Life support for Mars must be designed, tested, and improved as needed to achieve high demonstrated reliability. A quantitative reliability goal should be established and used to guide development t. The designers should select reliable components and minimize interface and integration problems. In theory a system can achieve the component-limited reliability, but testing often reveal unexpected failures due to design mistakes or flawed components. Testing should extend long enough to detect any unexpected failure modes and to verify the expected reliability. Iterated redesign and retest may be required to achieve the reliability goal. If the reliability is less than required, it may be improved by providing spare components or redundant systems. The number of spares required to achieve a given reliability goal depends on the component failure rate. If the failure rate is under estimated, the number of spares will be insufficient and the system may fail. If the design is likely to have undiscovered design or component problems, it is advisable to use dissimilar redundancy, even though this multiplies the design and development cost. In the ideal case, a human tended closed system operational test should be conducted to gain confidence in operations, maintenance, and repair. The difficulty in achieving high reliability in unproven complex systems may require the use of simpler, more mature, intrinsically higher reliability systems. The limitations of budget, schedule, and technology may suggest accepting lower and

  10. AMSAA Reliability Growth Guide

    National Research Council Canada - National Science Library

    Broemm, William

    2000-01-01

    ... has developed reliability growth methodology for all phases of the process, from planning to tracking to projection. The report presents this methodology and associated reliability growth concepts.

  11. Age and Acceptance of Euthanasia.

    Science.gov (United States)

    Ward, Russell A.

    1980-01-01

    Study explores relationship between age (and sex and race) and acceptance of euthanasia. Women and non-Whites were less accepting because of religiosity. Among older people less acceptance was attributable to their lesser education and greater religiosity. Results suggest that quality of life in old age affects acceptability of euthanasia. (Author)

  12. Validity and Reliability of Baseline Testing in a Standardized Environment.

    Science.gov (United States)

    Higgins, Kathryn L; Caze, Todd; Maerlender, Arthur

    2017-08-11

    The Immediate Postconcussion Assessment and Cognitive Testing (ImPACT) is a computerized neuropsychological test battery commonly used to determine cognitive recovery from concussion based on comparing post-injury scores to baseline scores. This model is based on the premise that ImPACT baseline test scores are a valid and reliable measure of optimal cognitive function at baseline. Growing evidence suggests that this premise may not be accurate and a large contributor to invalid and unreliable baseline test scores may be the protocol and environment in which baseline tests are administered. This study examined the effects of a standardized environment and administration protocol on the reliability and performance validity of athletes' baseline test scores on ImPACT by comparing scores obtained in two different group-testing settings. Three hundred-sixty one Division 1 cohort-matched collegiate athletes' baseline data were assessed using a variety of indicators of potential performance invalidity; internal reliability was also examined. Thirty-one to thirty-nine percent of the baseline cases had at least one indicator of low performance validity, but there were no significant differences in validity indicators based on environment in which the testing was conducted. Internal consistency reliability scores were in the acceptable to good range, with no significant differences between administration conditions. These results suggest that athletes may be reliably performing at levels lower than their best effort would produce. © The Author 2017. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  13. Reliability of the Superimposed-Burst Technique in Patients With Patellofemoral Pain: A Technical Report.

    Science.gov (United States)

    Norte, Grant E; Frye, Jamie L; Hart, Joseph M

    2015-11-01

    The superimposed-burst (SIB) technique is commonly used to quantify central activation failure after knee-joint injury, but its reliability has not been established in pathologic cohorts. To assess within-session and between-sessions reliability of the SIB technique in patients with patellofemoral pain. Descriptive laboratory study. University laboratory. A total of 10 patients with self-reported patellofemoral pain (1 man, 9 women; age = 24.1 ± 3.8 years, height = 167.8 ± 15.2 cm, mass = 71.6 ± 17.5 kg) and 10 healthy control participants (3 men, 7 women; age = 27.4 ± 5.0 years, height = 173.5 ± 9.9 cm, mass = 78.2 ± 16.5 kg) volunteered. Participants were assessed at 6 intervals spanning 21 days. Intraclass correlation coefficients (ICCs [3,3]) were used to assess reliability. Quadriceps central activation ratio, knee-extension maximal voluntary isometric contraction force, and SIB force. The quadriceps central activation ratio was highly reliable within session (ICC [3,3] = 0.97) and between sessions through day 21 (ICC [3,3] = 0.90-0.95). Acceptable reliability of knee extension (ICC [3,3] = 0.75-0.91) and SIB force (ICC [3,3] = 0.77-0.89) was observed through day 21. The SIB technique was reliable for clinical research up to 21 days in patients with patellofemoral pain.

  14. A reliability simulation language for reliability analysis

    International Nuclear Information System (INIS)

    Deans, N.D.; Miller, A.J.; Mann, D.P.

    1986-01-01

    The results of work being undertaken to develop a Reliability Description Language (RDL) which will enable reliability analysts to describe complex reliability problems in a simple, clear and unambiguous way are described. Component and system features can be stated in a formal manner and subsequently used, along with control statements to form a structured program. The program can be compiled and executed on a general-purpose computer or special-purpose simulator. (DG)

  15. Investigating Students' Usage and Acceptance of Electronic Books

    Science.gov (United States)

    Sieche, Susan; Krey, Birte; Bastiaens, Theo

    2013-01-01

    The purpose of this study is to investigate students' usage and acceptance of electronic books. Factors correlating with students' attitude towards e-books were examined using the Technology Acceptance Model (Davis, Bagozzi, & Warshaw 1989). A questionnaire was administered online for students at University of Hagen. Results indicate that…

  16. Equipment Reliability Program in NPP Krsko

    International Nuclear Information System (INIS)

    Skaler, F.; Djetelic, N.

    2006-01-01

    Operation that is safe, reliable, effective and acceptable to public is the common message in a mission statement of commercial nuclear power plants (NPPs). To fulfill these goals, nuclear industry, among other areas, has to focus on: 1 Human Performance (HU) and 2 Equipment Reliability (EQ). The performance objective of HU is as follows: The behaviors of all personnel result in safe and reliable station operation. While unwanted human behaviors in operations mostly result directly in the event, the behavior flaws either in the area of maintenance or engineering usually cause decreased equipment reliability. Unsatisfied Human performance leads even the best designed power plants into significant operating events, which can be found as well-known examples in nuclear industry. Equipment reliability is today recognized as the key to success. While the human performance at most NPPs has been improving since the start of WANO / INPO / IAEA evaluations, the open energy market has forced the nuclear plants to reduce production costs and operate more reliably and effectively. The balance between these two (opposite) goals has made equipment reliability even more important for safe, reliable and efficient production. Insisting on on-line operation by ignoring some principles of safety could nowadays in a well-developed safety culture and human performance environment exceed the cost of electricity losses. In last decade the leading USA nuclear companies put a lot of effort to improve equipment reliability primarily based on INPO Equipment Reliability Program AP-913 at their NPP stations. The Equipment Reliability Program is the key program not only for safe and reliable operation, but also for the Life Cycle Management and Aging Management on the way to the nuclear power plant life extension. The purpose of Equipment Reliability process is to identify, organize, integrate and coordinate equipment reliability activities (preventive and predictive maintenance, maintenance

  17. Den betingede accept

    DEFF Research Database (Denmark)

    Kolind, Torsten

    1999-01-01

    The article focus on aspects of identity and social order in relation to the interaction between ‘normals' and ex-prisoners, that is, ex-prisoners, who wants to live a normal life without criminality. It is argued, that this interaction and the normality that the ex-prisoner is granted often......, on the surface, can look rather unproblematic, but that it, none the less, is ruled by, what the author calls the conditioned accept. That is, the ex-prisoner should see himself as normal, at the same time that he withdraw from those situations, practices and attitude where the normals would have difficulties...

  18. Baby-Crying Acceptance

    Science.gov (United States)

    Martins, Tiago; de Magalhães, Sérgio Tenreiro

    The baby's crying is his most important mean of communication. The crying monitoring performed by devices that have been developed doesn't ensure the complete safety of the child. It is necessary to join, to these technological resources, means of communicating the results to the responsible, which would involve the digital processing of information available from crying. The survey carried out, enabled to understand the level of adoption, in the continental territory of Portugal, of a technology that will be able to do such a digital processing. It was used the TAM as the theoretical referential. The statistical analysis showed that there is a good probability of acceptance of such a system.

  19. Marketing for Acceptance

    Directory of Open Access Journals (Sweden)

    Tina L. Johnston, Ph.D.

    2009-11-01

    Full Text Available Becoming a researcher comes with the credentializing pressure to publish articles in peer-reviewed journals (Glaser, 1992; Glaser, 2007; Glaser, 2008. The work intensive process is exacerbated when the author’s research method is grounded theory. This study investigated the concerns of early and experienced grounded theorists to discover how they worked towards publishing research projects that applied grounded theory as a methodology. The result was a grounded theory of marketing for acceptance that provides the reader with insight into ways that classic grounded theorists have published their works. This is followed by a discussion of ideas for normalizing classic grounded theory research methods in our substantive fields.

  20. The Reliability and Legality of Online Education

    Science.gov (United States)

    Agbebaku, C. A.; Adavbiele, A. Justina

    2016-01-01

    Today, the classroom beyond the border through online Open University education in Nigeria has made it possible for many students to obtain university degrees. However, the reliability and legality of such degrees have become questionable. This paper is a descriptive exploratory case study regarding the public and private sector end-users, whose…

  1. Accepted into Education City

    Science.gov (United States)

    Asquith, Christina

    2006-01-01

    Qatar's Education City, perhaps the world's most diverse campus, is almost entirely unknown in the United States, but represents the next step in the globalization of American higher education--international franchising. Aided by technology such as online libraries, distance learning and streaming video, U.S. universities offer--and charge tuition…

  2. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous...... abortion, women with ectopic pregnancies, women attending antenatal care and women with induced abortion. They were divided into four groups: women with planned and accepted pregnancies (accepting planners, n=2137), women who accepted an initially unplanned pregnancy (accepting non-planners, n=1006), women...... who rejected an initially planned pregnancy (rejecting planners, n=31), and women with unplanned and rejected pregnancies (rejecting non-planners, n=342). The association between socio-economic characteristics and pregnancy planning and acceptance was evaluated by comparing accepting non...

  3. Data reliability in home healthcare services

    NARCIS (Netherlands)

    Vavilis, S.; Zannone, N.; Petkovic, M.

    2013-01-01

    Home healthcare services are emerging as a new frontier in healthcare practices. Data reliability, however, is crucial for the acceptance of these new services. This work presents a semi-automated system to evaluate the quality of medical measurements taken by patients. The system relies on data

  4. Introduction to quality and reliability engineering

    CERN Document Server

    Jiang, Renyan

    2015-01-01

    This book presents the state-of-the-art in quality and reliability engineering from a product life cycle standpoint. Topics in reliability include reliability models, life data analysis and modeling, design for reliability and accelerated life testing, while topics in quality include design for quality, acceptance sampling and supplier selection, statistical process control, production tests such as screening and burn-in, warranty and maintenance. The book provides comprehensive insights into two closely related subjects, and includes a wealth of examples and problems to enhance reader comprehension and link theory and practice. All numerical examples can be easily solved using Microsoft Excel. The book is intended for senior undergraduate and post-graduate students in related engineering and management programs such as mechanical engineering, manufacturing engineering, industrial engineering and engineering management programs, as well as for researchers and engineers in the quality and reliability fields. D...

  5. Reliability of the Social Phobia and Anxiety Inventory (SPAI Portuguese version in a heterogeneous sample of Brazilian university students Fidedignidade da versão em português do Inventário de Ansiedade e Fobia Social (SPAI em amostra heterogênea de estudantes universitários brasileiros

    Directory of Open Access Journals (Sweden)

    Patrícia Picon

    2005-06-01

    Full Text Available OBJECTIVE: To evaluate internal consistency and temporal stability trough test re-test reliability of the Portuguese version of the Social Phobia and Anxiety Inventory (SPAI in a heterogeneous Brazilian sample. METHODS: After informed consent, the translated and adapted version of the SPAI Portuguese was tested and re-tested at a 14-day interval in a sample of 225 university students, both genders, from 4 different undergraduate courses. After double data entry, statistical analysis included Cronbach's alphas, Pearson and intra-class correlation coefficients. RESULTS: The studied sample consisted of 213 students from 4 sub-samples: 95 law students, 31 social communication students, 54 civil engineering students and 33 dental medicine students. The mean age was 23 (±6 years and 110 (51.6% were female. The Cronbach' alpha was 0.96, no difference for both genders. The differential (total score of the SPAI Portuguese showed Pearson coefficient 0.83 (95% CI 0.78-0.87 and Intra-class coefficient 0.83 (95% CI 0.78-0.86. There was no statistical difference in Pearson coefficients between genders (p = 0.121 and the 4 sub-samples (p = 0.258. CONCLUSION: The results do not ensure validity, however, the SPAI Portuguese version presented a good content homogeneity with satisfactory level of internal consistency. The temporal stability evaluated was substantial. The results showed that the Portuguese SPAI presents perfectly acceptable reliability for both genders and suggest that it can be used in Brazilian populationsOBJETIVO: Avaliar consistência interna e estabilidade temporal, através de fidedignidade teste-reteste, da versão em português do Inventário de Ansiedade e Fobia Social (SPAI, em uma amostra brasileira heterogênea. MÉTODOS: Após consentimento informado, a versão traduzida e adaptada para o português do SPAI foi testada e re-testada, com 14 dias de intervalo, em uma amostra de 225 estudantes universitários de ambos os gêneros, de

  6. Children acceptance of laser dental treatment

    Science.gov (United States)

    Lazea, Andreea; Todea, Carmen

    2016-03-01

    Objectives: To evaluate the dental anxiety level and the degree of acceptance of laser assisted pedodontic treatments from the children part. Also, we want to underline the advantages of laser use in pediatric dentistry, to make this technology widely used in treating dental problems of our children patients. Methods: Thirty pediatric dental patients presented in the Department of Pedodontics, University of Medicine and Pharmacy "Victor Babeş", Timişoara were evaluated using the Wong-Baker pain rating scale, wich was administered postoperatory to all patients, to assess their level of laser therapy acceptance. Results: Wong-Baker faces pain rating scale (WBFPS) has good validity and high specificity; generally it's easy for children to use, easy to compare and has good feasibility. Laser treatment has been accepted and tolerated by pediatric patients for its ability to reduce or eliminate pain. Around 70% of the total sample showed an excellent acceptance of laser dental treatment. Conclusions: Laser technology is useful and effective in many clinical situations encountered in pediatric dentistry and a good level of pacient acceptance is reported during all laser procedures on hard and soft tissues.

  7. Acceptance of Swedish e-health services

    Directory of Open Access Journals (Sweden)

    Mary-Louise Jung

    2010-11-01

    Full Text Available Mary-Louise Jung1, Karla Loria11Division of Industrial Marketing, e-Commerce and Logistics, Lulea University of Technology, SwedenObjective: To investigate older people’s acceptance of e-health services, in order to identify determinants of, and barriers to, their intention to use e-health.Method: Based on one of the best-established models of technology acceptance, Technology Acceptance Model (TAM, in-depth exploratory interviews with twelve individuals over 45 years of age and of varying backgrounds are conducted.Results: This investigation could find support for the importance of usefulness and perceived ease of use of the e-health service offered as the main determinants of people’s intention to use the service. Additional factors critical to the acceptance of e-health are identified, such as the importance of the compatibility of the services with citizens’ needs and trust in the service provider. Most interviewees expressed positive attitudes towards using e-health and find these services useful, convenient, and easy to use.Conclusion: E-health services are perceived as a good complement to traditional health care service delivery, even among older people. These people, however, need to become aware of the e-health alternatives that are offered to them and the benefits they provide.Keywords: health services, elderly, technology, Internet, TAM, patient acceptance, health-seeking behavior

  8. Accelerated reliability demonstration under competing failure modes

    International Nuclear Information System (INIS)

    Luo, Wei; Zhang, Chun-hua; Chen, Xun; Tan, Yuan-yuan

    2015-01-01

    The conventional reliability demonstration tests are difficult to apply to products with competing failure modes due to the complexity of the lifetime models. This paper develops a testing methodology based on the reliability target allocation for reliability demonstration under competing failure modes at accelerated conditions. The specified reliability at mission time and the risk caused by sampling of the reliability target for products are allocated for each failure mode. The risk caused by degradation measurement fitting of the target for a product involving performance degradation is equally allocated to each degradation failure mode. According to the allocated targets, the accelerated life reliability demonstration test (ALRDT) plans for the failure modes are designed. The accelerated degradation reliability demonstration test plans and the associated ALRDT plans for the degradation failure modes are also designed. Next, the test plan and the decision rules for the products are designed. Additionally, the effects of the discreteness of sample size and accepted number of failures for failure modes on the actual risks caused by sampling for the products are investigated. - Highlights: • Accelerated reliability demonstration under competing failure modes is studied. • The method is based on the reliability target allocation involving the risks. • The test plan for the products is based on the plans for all the failure modes. • Both failure mode and degradation failure modes are considered. • The error of actual risks caused by sampling for the products is small enough

  9. Reliability data banks

    International Nuclear Information System (INIS)

    Cannon, A.G.; Bendell, A.

    1991-01-01

    Following an introductory chapter on Reliability, what is it, why it is needed, how it is achieved and measured, the principles of reliability data bases and analysis methodologies are the subject of the next two chapters. Achievements due to the development of data banks are mentioned for different industries in the next chapter, FACTS, a comprehensive information system for industrial safety and reliability data collection in process plants are covered next. CREDO, the Central Reliability Data Organization is described in the next chapter and is indexed separately, as is the chapter on DANTE, the fabrication reliability Data analysis system. Reliability data banks at Electricite de France and IAEA's experience in compiling a generic component reliability data base are also separately indexed. The European reliability data system, ERDS, and the development of a large data bank come next. The last three chapters look at 'Reliability data banks, - friend foe or a waste of time'? and future developments. (UK)

  10. Suncor maintenance and reliability

    Energy Technology Data Exchange (ETDEWEB)

    Little, S. [Suncor Energy, Calgary, AB (Canada)

    2006-07-01

    Fleet maintenance and reliability at Suncor Energy was discussed in this presentation, with reference to Suncor Energy's primary and support equipment fleets. This paper also discussed Suncor Energy's maintenance and reliability standard involving people, processes and technology. An organizational maturity chart that graphed organizational learning against organizational performance was illustrated. The presentation also reviewed the maintenance and reliability framework; maintenance reliability model; the process overview of the maintenance and reliability standard; a process flow chart of maintenance strategies and programs; and an asset reliability improvement process flow chart. An example of an improvement initiative was included, with reference to a shovel reliability review; a dipper trip reliability investigation; bucket related failures by type and frequency; root cause analysis of the reliability process; and additional actions taken. Last, the presentation provided a graph of the results of the improvement initiative and presented the key lessons learned. tabs., figs.

  11. Information technology acceptance in health information management.

    Science.gov (United States)

    Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

    2014-01-01

    User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

  12. Outline for an acceptable nuclear future

    Energy Technology Data Exchange (ETDEWEB)

    Weinberg, A.M.

    1977-07-01

    Nuclear energy is likely to develop in two phases. Phase I, based on burner reactors, is self-limiting because the reserve of uranium is limited. Phase II, based on breeders, might last for an extremely long time. It is suggested that opposition to Phase I of nuclear energy might be reduced if an acceptable Phase II can be constructed. Elements of an acceptable Phase II might include isolated and collocated energy centers with resident IAEA inspectors; heavier security; professionalization of the nuclear cadre; immortality of the operating entities; and separation of generation and distribution. Though these measures are aimed primarily at increasing the safety and reliability of the nuclear system, it is suggested that the proposed siting policy, with IAEA resident inspection, might be more proliferation-resistant than is the current dispersed system.

  13. The Accelerator Reliability Forum

    CERN Document Server

    Lüdeke, Andreas; Giachino, R

    2014-01-01

    A high reliability is a very important goal for most particle accelerators. The biennial Accelerator Reliability Workshop covers topics related to the design and operation of particle accelerators with a high reliability. In order to optimize the over-all reliability of an accelerator one needs to gather information on the reliability of many different subsystems. While a biennial workshop can serve as a platform for the exchange of such information, the authors aimed to provide a further channel to allow for a more timely communication: the Particle Accelerator Reliability Forum [1]. This contribution will describe the forum and advertise it’s usage in the community.

  14. Public acceptance of nuclear power

    International Nuclear Information System (INIS)

    Wildgruber, O.H.

    1990-01-01

    The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

  15. Review of Quantitative Software Reliability Methods

    Energy Technology Data Exchange (ETDEWEB)

    Chu, T.L.; Yue, M.; Martinez-Guridi, M.; Lehner, J.

    2010-09-17

    The current U.S. Nuclear Regulatory Commission (NRC) licensing process for digital systems rests on deterministic engineering criteria. In its 1995 probabilistic risk assessment (PRA) policy statement, the Commission encouraged the use of PRA technology in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. Although many activities have been completed in the area of risk-informed regulation, the risk-informed analysis process for digital systems has not yet been satisfactorily developed. Since digital instrumentation and control (I&C) systems are expected to play an increasingly important role in nuclear power plant (NPP) safety, the NRC established a digital system research plan that defines a coherent set of research programs to support its regulatory needs. One of the research programs included in the NRC's digital system research plan addresses risk assessment methods and data for digital systems. Digital I&C systems have some unique characteristics, such as using software, and may have different failure causes and/or modes than analog I&C systems; hence, their incorporation into NPP PRAs entails special challenges. The objective of the NRC's digital system risk research is to identify and develop methods, analytical tools, and regulatory guidance for (1) including models of digital systems into NPP PRAs, and (2) using information on the risks of digital systems to support the NRC's risk-informed licensing and oversight activities. For several years, Brookhaven National Laboratory (BNL) has worked on NRC projects to investigate methods and tools for the probabilistic modeling of digital systems, as documented mainly in NUREG/CR-6962 and NUREG/CR-6997. However, the scope of this research principally focused on hardware failures, with limited reviews of software failure experience and software reliability methods. NRC also sponsored research at the Ohio State University investigating the modeling of

  16. Highly reliable TOFD UT Technique

    International Nuclear Information System (INIS)

    Acharya, G.D.; Trivedi, S.A.R.; Pai, K.B.

    2003-01-01

    The high performance of the time of flight diffraction technique (TOFD) with regard to the detection capabilities of weld defects such as crack, slag, lack of fusion has led to a rapidly increasing acceptance of the technique as a pre?service inspection tool. Since the early 1990s TOFD has been applied to several projects, where it replaced the commonly used radiographic testing. The use of TOM lead to major time savings during new build and replacement projects. At the same time the TOFD technique was used as base line inspection, which enables monitoring in the future for critical welds, but also provides documented evidence for life?time. The TOFD technique as the ability to detect and simultaneously size flows of nearly any orientation within the weld and heat affected zone. TOM is recognized as a reliable, proven technique for detection and sizing of defects and proven to be a time saver, resulting in shorter shutdown periods and construction project times. Thus even in cases where inspection price of TOFD per welds is higher, in the end it will result in significantly lower overall costs and improve quality. This paper deals with reliability, economy, acceptance criteria and field experience. It also covers comparative study between radiography technique Vs. TOFD. (Author)

  17. Reliability engineering for nuclear and other high technology systems

    International Nuclear Information System (INIS)

    Lakner, A.A.; Anderson, R.T.

    1985-01-01

    This book is written for the reliability instructor, program manager, system engineer, design engineer, reliability engineer, nuclear regulator, probability risk assessment (PRA) analyst, general manager and others who are involved in system hardware acquisition, design and operation and are concerned with plant safety and operational cost-effectiveness. It provides criteria, guidelines and comprehensive engineering data affecting reliability; it covers the key aspects of system reliability as it relates to conceptual planning, cost tradeoff decisions, specification, contractor selection, design, test and plant acceptance and operation. It treats reliability as an integrated methodology, explicitly describing life cycle management techniques as well as the basic elements of a total hardware development program, including: reliability parameters and design improvement attributes, reliability testing, reliability engineering and control. It describes how these elements can be defined during procurement, and implemented during design and development to yield reliable equipment. (author)

  18. Brief Report: The Identity Style Inventory (ISI-3) and the Utrecht-Management of Identity Commitments Scale (U-MICS)--Factor Structure, Reliability, and Convergent Validity in French-Speaking University Students

    Science.gov (United States)

    Zimmermann, Gregoire; Mahaim, Elodie Biermann; Mantzouranis, Gregory; Genoud, Philippe A.; Crocetti, Elisabetta

    2012-01-01

    The purpose of this study was to evaluate the factor structure and the reliability of the French versions of the Identity Style Inventory (ISI-3) and the Utrecht-Management of Identity Commitments Scale (U-MICS) in a sample of college students (N = 457, 18-25 years old). Confirmatory factor analyses confirmed the hypothesized three-factor solution…

  19. Human Reliability Program Overview

    Energy Technology Data Exchange (ETDEWEB)

    Bodin, Michael

    2012-09-25

    This presentation covers the high points of the Human Reliability Program, including certification/decertification, critical positions, due process, organizational structure, program components, personnel security, an overview of the US DOE reliability program, retirees and academia, and security program integration.

  20. Power electronics reliability analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Mark A.; Atcitty, Stanley

    2009-12-01

    This report provides the DOE and industry with a general process for analyzing power electronics reliability. The analysis can help with understanding the main causes of failures, downtime, and cost and how to reduce them. One approach is to collect field maintenance data and use it directly to calculate reliability metrics related to each cause. Another approach is to model the functional structure of the equipment using a fault tree to derive system reliability from component reliability. Analysis of a fictitious device demonstrates the latter process. Optimization can use the resulting baseline model to decide how to improve reliability and/or lower costs. It is recommended that both electric utilities and equipment manufacturers make provisions to collect and share data in order to lay the groundwork for improving reliability into the future. Reliability analysis helps guide reliability improvements in hardware and software technology including condition monitoring and prognostics and health management.

  1. Reliability of software

    International Nuclear Information System (INIS)

    Kopetz, H.

    1980-01-01

    Common factors and differences in the reliability of hardware and software; reliability increase by means of methods of software redundancy. Maintenance of software for long term operating behavior. (HP) [de

  2. Validation of the Spanish version of the Chronic Pain Acceptance Questionnaire (CPAQ for the assessment of acceptance in fibromyalgia

    Directory of Open Access Journals (Sweden)

    Luciano Juan V

    2010-04-01

    Full Text Available Abstract Background The aim of this study was to validate a Spanish version of the Chronic Pain Acceptance Questionnaire (CPAQ. Pain acceptance is the process of giving up the struggle with pain and learning to live a worthwhile life despite it. The Chronic Pain Acceptance Questionnaire (CPAQ is the questionnaire most often used to measure pain acceptance in chronic pain populations. Methods A total of 205 Spanish patients diagnosed with fibromyalgia syndrome who attended our pain clinic were asked to complete a battery of psychometric instruments: the Pain Visual Analogue Scale (PVAS for pain intensity, the Hospital Anxiety and Depression Scale (HADS, the Medical Outcome Study Short Form 36 (SF-36, the Pain Catastrophising Scale (PCS and the Fibromyalgia Impact Questionnaire (FIQ. Results Analysis of results showed that the Spanish CPAQ had good test-retest reliability (intraclass correlation coefficient 0.83 and internal consistency reliability (Cronbach's α: 0.83. The Spanish CPAQ score significantly correlated with pain intensity, anxiety, depression, pain catastrophising, health status and physical and psychosocial disability. The Scree plot and a Principal Components Factor analysis confirmed the same two-factor construct as the original English CPAQ. Conclusion The Spanish CPAQ is a reliable clinical assessment tool with valid construct validity for the acceptance measurement among a sample of Spanish fibromyalgia patients. This study will make it easier to assess pain acceptance in Spanish populations with fibromyalgia.

  3. Reliable Design Versus Trust

    Science.gov (United States)

    Berg, Melanie; LaBel, Kenneth A.

    2016-01-01

    This presentation focuses on reliability and trust for the users portion of the FPGA design flow. It is assumed that the manufacturer prior to hand-off to the user tests FPGA internal components. The objective is to present the challenges of creating reliable and trusted designs. The following will be addressed: What makes a design vulnerable to functional flaws (reliability) or attackers (trust)? What are the challenges for verifying a reliable design versus a trusted design?

  4. Pocket Handbook on Reliability

    Science.gov (United States)

    1975-09-01

    exponencial distributions Weibull distribution, -xtimating reliability, confidence intervals, relia- bility growth, 0. P- curves, Bayesian analysis. 20 A S...introduction for those not familiar with reliability and a good refresher for those who are currently working in the area. LEWIS NERI, CHIEF...includes one or both of the following objectives: a) prediction of the current system reliability, b) projection on the system reliability for someI future

  5. Bridging the Gap between Social Acceptance and Ethical Acceptability.

    Science.gov (United States)

    Taebi, Behnam

    2017-10-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological risk, particularly when we evaluate technologies with transnational and intergenerational risks. I argue that good governance of risky technology requires analyzing both social acceptance and ethical acceptability. Conceptually, these two notions are mostly complementary. Social acceptance studies are not capable of sufficiently capturing all the morally relevant features of risky technologies; ethical analyses do not typically include stakeholders' opinions, and they therefore lack the relevant empirical input for a thorough ethical evaluation. Only when carried out in conjunction are these two types of analysis relevant to national and international governance of risky technology. I discuss the Rawlsian wide reflective equilibrium as a method for marrying social acceptance and ethical acceptability. Although the rationale of my argument is broadly applicable, I will examine the case of multinational nuclear waste repositories in particular. This example will show how ethical issues may be overlooked if we focus only on social acceptance, and will provide a test case for demonstrating how the wide reflective equilibrium can help to bridge the proverbial acceptance-acceptability gap. © 2016 The Authors Risk Analysis published by Wiley Periodicals, Inc. on behalf of Society for Risk Analysis.

  6. Reliability of the Crowe und Hartofilakidis classifications used in the assessment of the adult dysplastic hip

    Energy Technology Data Exchange (ETDEWEB)

    Decking, Ralf; Brunner, Alexander; Puhl, Wolfhart [University of Ulm, Orthopaedic Department, RKU, Ulm (Germany); Decking, Jens [Johannes Gutenberg University School of Medicine, Department of Orthopaedic Surgery, Mainz (Germany); Guenther, Klaus-Peter [University of Ulm, Orthopaedic Department, RKU, Ulm (Germany); University-Hospital Carl Gustav Carus, Department of Orthopaedics, Dresden (Germany)

    2006-05-15

    To assess the inter-observer and intra-observer reliability of two commonly used radiographic classification systems in the evaluation of hip dysplasia in skeletally mature adults. Three observers with different levels of training independently classified 62 dysplastic hips on 51 standard anteriorposterior pelvis radiographs according to the criteria defined by Crowe and by Hartofilakidis. To assess intra-observer reliability, the same radiographs were reviewed 3 months later by the same observers. At the time of the radiographic examination, the mean age of the 51 patients had been 54 years (range 18-82 years). A high correlation concerning the inter- and intra-observer reliability of both systems was demonstrated. Inter-observer reliability displayed a weighted kappa coefficient of 0.82 for the Crowe and 0.75 for the Hartofilakidis classification. Intra-observer reliability showed a kappa coefficient of 0.86 and 0.79, respectively. Both classification systems can be recommended to compare collectives of adult patients with congenital dysplasia of the hip. However, for future clinical practice, it would be advisable to agree on one universally accepted system as a standard in the literature. (orig.)

  7. Reliability of the Crowe und Hartofilakidis classifications used in the assessment of the adult dysplastic hip

    International Nuclear Information System (INIS)

    Decking, Ralf; Brunner, Alexander; Puhl, Wolfhart; Decking, Jens; Guenther, Klaus-Peter

    2006-01-01

    To assess the inter-observer and intra-observer reliability of two commonly used radiographic classification systems in the evaluation of hip dysplasia in skeletally mature adults. Three observers with different levels of training independently classified 62 dysplastic hips on 51 standard anteriorposterior pelvis radiographs according to the criteria defined by Crowe and by Hartofilakidis. To assess intra-observer reliability, the same radiographs were reviewed 3 months later by the same observers. At the time of the radiographic examination, the mean age of the 51 patients had been 54 years (range 18-82 years). A high correlation concerning the inter- and intra-observer reliability of both systems was demonstrated. Inter-observer reliability displayed a weighted kappa coefficient of 0.82 for the Crowe and 0.75 for the Hartofilakidis classification. Intra-observer reliability showed a kappa coefficient of 0.86 and 0.79, respectively. Both classification systems can be recommended to compare collectives of adult patients with congenital dysplasia of the hip. However, for future clinical practice, it would be advisable to agree on one universally accepted system as a standard in the literature. (orig.)

  8. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated......, and as an example the reliability profile and a sensitivity analyses for a corroded reinforced concrete bridge is shown....

  9. Reliability in engineering '87

    International Nuclear Information System (INIS)

    Tuma, M.

    1987-01-01

    The participants heard 51 papers dealing with the reliability of engineering products. Two of the papers were incorporated in INIS, namely ''Reliability comparison of two designs of low pressure regeneration of the 1000 MW unit at the Temelin nuclear power plant'' and ''Use of probability analysis of reliability in designing nuclear power facilities.''(J.B.)

  10. Pregnancy planning and acceptance among Danish pregnant women

    DEFF Research Database (Denmark)

    Rasch, V; Knudsen, L B; Wielandt, H

    2001-01-01

    OBJECTIVE: To study how living conditions influence pregnancy planning and acceptance among Danish women. METHOD: A cross-sectional questionnaire study performed among 3516 pregnant women attending Odense University Hospital, Denmark. The study population consisted of women with spontaneous......-planners with accepting planners and by comparing rejecting planners with rejecting non-planners. The variables studied comprise age, number of children, partner relationship, education, occupation, economic situation and contraceptives. RESULTS: The characteristics of accepting non-planners and accepting planners were...... in accordance and in contrast to those of rejecting planners and in particular of rejecting non-planners. The contraceptive prevalence rate among accepting non-planners was 15%. Among rejecting non-planners the same figure was 51%. CONCLUSION: Accepting non-planners seemed to be in a situation which could...

  11. Software reliability through fault-avoidance and fault-tolerance

    Science.gov (United States)

    Vouk, Mladen A.; Mcallister, David F.

    1992-01-01

    Accomplishments in the following research areas are summarized: structure based testing, reliability growth, and design testability with risk evaluation; reliability growth models and software risk management; and evaluation of consensus voting, consensus recovery block, and acceptance voting. Four papers generated during the reporting period are included as appendices.

  12. Approach for an integral power transformer reliability model

    NARCIS (Netherlands)

    Schijndel, van A.; Wouters, P.A.A.F.; Steennis, E.F.; Wetzer, J.M.

    2012-01-01

    In electrical power transmission and distribution networks power transformers represent a crucial group of assets both in terms of reliability and investments. In order to safeguard the required quality at acceptable costs, decisions must be based on a reliable forecast of future behaviour. The aim

  13. Reliable computer systems.

    Science.gov (United States)

    Wear, L L; Pinkert, J R

    1993-11-01

    In this article, we looked at some decisions that apply to the design of reliable computer systems. We began with a discussion of several terms such as testability, then described some systems that call for highly reliable hardware and software. The article concluded with a discussion of methods that can be used to achieve higher reliability in computer systems. Reliability and fault tolerance in computers probably will continue to grow in importance. As more and more systems are computerized, people will want assurances about the reliability of these systems, and their ability to work properly even when sub-systems fail.

  14. Human factor reliability program

    International Nuclear Information System (INIS)

    Knoblochova, L.

    2017-01-01

    The human factor's reliability program was at Slovenske elektrarne, a.s. (SE) nuclear power plants. introduced as one of the components Initiatives of Excellent Performance in 2011. The initiative's goal was to increase the reliability of both people and facilities, in response to 3 major areas of improvement - Need for improvement of the results, Troubleshooting support, Supporting the achievement of the company's goals. The human agent's reliability program is in practice included: - Tools to prevent human error; - Managerial observation and coaching; - Human factor analysis; -Quick information about the event with a human agent; -Human reliability timeline and performance indicators; - Basic, periodic and extraordinary training in human factor reliability(authors)

  15. Acceptance and Usability of OER in India: An Investigation Using UTAUT Model

    Directory of Open Access Journals (Sweden)

    Nayantara Padhi

    2018-02-01

    Full Text Available In the global movement towards open knowledge society, open educational resources (OER have become a prominent contributor as a medium of education, research and training. In India, the phenomenon of OER is still in nascent stage. Although the country has been massively investing on growth and usage of ICT, it still requires acceptance of OER as a medium of education, research or training. Particularly, adoption and usage of OER posses several challenges such as accessibility, reliability, copy right etc. There is plethora of research studies on the ICT usage in education in India, but there is hardly any empirical research evidence on OER in India. With this backdrop, at the first instance it is very much essential to investigate the acceptance and usability of OER in India. This paper focuses on faculty perception by applying Unified Theory of Acceptance and Use of Technology (UTAUT model. Apart from this, the study also identifies the challenges associated with OER. For the purpose of this survey data is collected from 22 Indian universities located pan India. The outcome of this empirical research shall certainly useful and provide guidelines for the policy makers and users of OER in India.

  16. Chinese version of the Perceived Stress Scale-10: A psychometric study in Chinese university students.

    Science.gov (United States)

    Lu, Wei; Bian, Qian; Wang, Wenzheng; Wu, Xiaoling; Wang, Zhen; Zhao, Min

    2017-01-01

    Chinese university students often suffer from acute stress, which can affect their mental health. We measured and evaluated perceived stress in this population using the Simplified Chinese version of the 10-item Perceived Stress Scale (SCPSS-10). The SCPSS-10, Patient Health Questionnaire (PHQ), and Generalized Anxiety Disorder 7-item scale (GAD-7) were conducted in 1096 university students. Two weeks later, 129 participants were re-tested using the SCPSS-10. Exploratory factor analysis yielded two factors with Eigen values of 4.76 and 1.48, accounting for 62.41% of the variance. Confirmatory factor analysis demonstrated good fit of this two-factor model. The internal consistency reliability, as measured by Cronbach's α, was 0.85. The test-retest reliability coefficient was 0.7. The SCPSS-10 exhibited high correlation with the PHQ-9 and GAD-7, indicating an acceptable concurrent validity. The SCPSS-10 exhibited satisfactory psychometric properties in Chinese university students.

  17. Adaptation and psychometric properties of the SBI-U scale for Academic Burnout in university students

    Directory of Open Access Journals (Sweden)

    Joan Boada-Grau

    2015-01-01

    Full Text Available The objective of the present study was to draw up a Spanish adaptation for university students of the School Burnout Inventory (SBI 9-item scale. This entailed a double adaptation, on the one hand from English into Spanish and then from secondary school students to university students. The scale was applied to 578 university students (25.7% men; 74.3% women from different regions in Spain. The findings indicate that the University students-SBI has the same structure as the original version in English for secondary school students. This was confirmed by factor analysis that pointed to the existence of three factors: Exhaustion, Cynicism and Inadequacy. Furthermore, the three subscales showed acceptable reliability (between .77 and .70 In addition to this, indications of validity were found using eighteen external correlates and seven contrast scales. Finally the SBI-U constitutes a potentially useful instrument for evaluating academic burnout in university students.

  18. ORGANIZATION OF MANAGEMENT ACCOUNTING AT THE UNIVERSITY AS A MECHANISM OF INNOVATIVE CHANGES

    Directory of Open Access Journals (Sweden)

    E. V. Myalkina

    2015-01-01

    Full Text Available In article the questions connected with introduction of management accounting at university are considered, the interrelation of strategic development of quality of education and effective management of resources of higher education institution comes to light, tendencies of financial and economic mechanisms of management are analyzed, opportunities for increase of efficiency of activity of university are defined. Management accounting reveals as the effective mechanism of management of university allowing to plan, consider and analyze financial results of the educational organization in general and on kinds of activity, divisions, business processes, programs, projects, sources of the income and articles of expenses. Article describes the organization of the registration and analytical system binding information for an assessment and the analysis of financial and economic activity of university for the purpose of receiving reliable information and acceptance of operational administrative decisions. Work describes basic elements of system of management accounting, describes practice of realization of this system on the example of Mininsky university.

  19. Public acceptance and USCEA

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    Public opinion plays a critical role in ensuring the future of nuclear energy. After the events at Three Mile Island in 1979, and more recently the Chernobyl accident, worldwide antinuclear movements surged upward. As a result, the global nuclear industry was compelled to institute education programs aimed at allaying public apprehension surrounding nuclear power. The US Council for Energy Awareness strives to disseminate information on nuclear issues in an effort to educate the public and thus create a foundation of support for this important energy option. The US Council for Energy Awareness (USCEA) is the national communications and information organization for the US commercial nuclear power industry. The organization provides a national voice for an industry whose issues are not always well understood by the public or by policy makers. It performs many functions for member companies, and offers information to the public. Included in the primary functions USCEA conducts on behalf of the nuclear industry are advertising, public and media relations, technical programs, and conferences. Worldwide, its membership is approximately 400, and includes utilities, vendors, consultants, universities, and other organizations with an interest in nuclear power

  20. American acceptance of nuclear power

    International Nuclear Information System (INIS)

    Barrett, W.

    1980-01-01

    The characteristic adventurous spirit that built American technology will eventually lead to American acceptance of nuclear power unless an overpowering loss of nerve causes us to reject both nuclear technology and world leadership. The acceptance of new technology by society has always been accompanied by activist opposition to industralization. To resolve the debate between environmental and exploitive extremists, we must accept with humility the basic premise that human accomplishment is a finite part of nature

  1. Tacit acceptance of the succession

    Directory of Open Access Journals (Sweden)

    Ioana NICOLAE

    2012-01-01

    Full Text Available This paper examines some essential and contradictory aspects regarding the issue of tacit acceptance of succession in terms of distinction between documents valuing tacit acceptance of succession and other acts that would not justify such a solution. The documents expressly indicated by the legislator as having tacit acceptance value as well as those which do not have such value are presented and their most important legal effects are examined and discussed.

  2. 75 FR 80391 - Electric Reliability Organization Interpretations of Interconnection Reliability Operations and...

    Science.gov (United States)

    2010-12-22

    ... transmission (G&T) cooperative or similar organization to accept compliance responsibility on behalf of its... be found on the Commission's Web site; see, e.g., the ``Quick Reference Guide for Paper Submissions... Electric Reliability Standards, Order No. 672, FERC Stats. & Regs. ] 31,204, order on reh'g, Order No. 672...

  3. Bridging the Gap between Social Acceptance and Ethical Acceptability

    NARCIS (Netherlands)

    Taebi, B.

    2016-01-01

    New technology brings great benefits, but it can also create new and significant risks. When evaluating those risks in policymaking, there is a tendency to focus on social acceptance. By solely focusing on social acceptance, we could, however, overlook important ethical aspects of technological

  4. Culture Representation in Human Reliability Analysis

    Energy Technology Data Exchange (ETDEWEB)

    David Gertman; Julie Marble; Steven Novack

    2006-12-01

    Understanding human-system response is critical to being able to plan and predict mission success in the modern battlespace. Commonly, human reliability analysis has been used to predict failures of human performance in complex, critical systems. However, most human reliability methods fail to take culture into account. This paper takes an easily understood state of the art human reliability analysis method and extends that method to account for the influence of culture, including acceptance of new technology, upon performance. The cultural parameters used to modify the human reliability analysis were determined from two standard industry approaches to cultural assessment: Hofstede’s (1991) cultural factors and Davis’ (1989) technology acceptance model (TAM). The result is called the Culture Adjustment Method (CAM). An example is presented that (1) reviews human reliability assessment with and without cultural attributes for a Supervisory Control and Data Acquisition (SCADA) system attack, (2) demonstrates how country specific information can be used to increase the realism of HRA modeling, and (3) discusses the differences in human error probability estimates arising from cultural differences.

  5. Exploring Students Acceptance of E-Learning Using Technology Acceptance Model in Jordanian Universities

    Science.gov (United States)

    Al-Adwan, Amer; Al-Adwan, Ahmad; Smedley, Jo

    2013-01-01

    Today's rapid changing world highlights the influence and impact of technology in all aspects of learning life. Higher Education institutions in developed Western countries believe that these developments offer rich opportunities to embed technological innovations within the learning environment. This places developing countries, striving to be…

  6. WHO safe surgery checklist: Barriers to universal acceptance

    Directory of Open Access Journals (Sweden)

    Divya Jain

    2018-01-01

    Full Text Available Development of the Safe Surgery Checklist is an initiative taken by the World Health Organization (WHO with an aim to reduce the complication rates during the surgical process. Despite gross reduction in the infection rate and morbidity following adoption of the checklist, many health-care providers are hesitant in implementing it in their everyday practice. In this article, we would like to highlight the hurdles in adoption of the WHO Surgical Checklist and measures that can be taken to overcome them.

  7. Applicability of Two Universally Accepted Mixed Dentition Analysis ...

    African Journals Online (AJOL)

    After thorough oral prophylaxis, alginate impressions were made for both the arches with appropriate-sized rim lock trays. Measurements were obtained from each dental cast using the electronic digital caliper (Baker SDN 10, India) calibrated to the nearest 0.01 mm, according to the method described by Jensen et al.,[14] in ...

  8. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

  9. Human reliability analysis

    International Nuclear Information System (INIS)

    Dougherty, E.M.; Fragola, J.R.

    1988-01-01

    The authors present a treatment of human reliability analysis incorporating an introduction to probabilistic risk assessment for nuclear power generating stations. They treat the subject according to the framework established for general systems theory. Draws upon reliability analysis, psychology, human factors engineering, and statistics, integrating elements of these fields within a systems framework. Provides a history of human reliability analysis, and includes examples of the application of the systems approach

  10. Reliability of electronic systems

    International Nuclear Information System (INIS)

    Roca, Jose L.

    2001-01-01

    Reliability techniques have been developed subsequently as a need of the diverse engineering disciplines, nevertheless they are not few those that think they have been work a lot on reliability before the same word was used in the current context. Military, space and nuclear industries were the first ones that have been involved in this topic, however not only in these environments it is that it has been carried out this small great revolution in benefit of the increase of the reliability figures of the products of those industries, but rather it has extended to the whole industry. The fact of the massive production, characteristic of the current industries, drove four decades ago, to the fall of the reliability of its products, on one hand, because the massively itself and, for other, to the recently discovered and even not stabilized industrial techniques. Industry should be changed according to those two new requirements, creating products of medium complexity and assuring an enough reliability appropriated to production costs and controls. Reliability began to be integral part of the manufactured product. Facing this philosophy, the book describes reliability techniques applied to electronics systems and provides a coherent and rigorous framework for these diverse activities providing a unifying scientific basis for the entire subject. It consists of eight chapters plus a lot of statistical tables and an extensive annotated bibliography. Chapters embrace the following topics: 1- Introduction to Reliability; 2- Basic Mathematical Concepts; 3- Catastrophic Failure Models; 4-Parametric Failure Models; 5- Systems Reliability; 6- Reliability in Design and Project; 7- Reliability Tests; 8- Software Reliability. This book is in Spanish language and has a potentially diverse audience as a text book from academic to industrial courses. (author)

  11. Circuit design for reliability

    CERN Document Server

    Cao, Yu; Wirth, Gilson

    2015-01-01

    This book presents physical understanding, modeling and simulation, on-chip characterization, layout solutions, and design techniques that are effective to enhance the reliability of various circuit units.  The authors provide readers with techniques for state of the art and future technologies, ranging from technology modeling, fault detection and analysis, circuit hardening, and reliability management. Provides comprehensive review on various reliability mechanisms at sub-45nm nodes; Describes practical modeling and characterization techniques for reliability; Includes thorough presentation of robust design techniques for major VLSI design units; Promotes physical understanding with first-principle simulations.

  12. Human reliability assessment in context

    International Nuclear Information System (INIS)

    Hollnagel, Erik

    2005-01-01

    Human Reliability Assessment (HRA) is conducted on the unspoken premise that 'human error' is a meaningful concept and that it can be associated with individual actions. The basis for this assumption it found in the origin of HRA, as a necessary extension of PSA to account for the impact of failures emanating from human actions. Although it was natural to model HRA on PSA, a large number of studies have shown that the premises are wrong, specifically that human and technological functions cannot be decomposed in the same manner. The general experience from accident studies also indicates that action failures are a function of the context, and that it is the variability of the context rather than the 'human error probability' that is the much sought for signal. Accepting this will have significant consequences for the way in which HRA, and ultimately also PSA, should be pursued

  13. Cone penetrometer acceptance test report

    Energy Technology Data Exchange (ETDEWEB)

    Boechler, G.N.

    1996-09-19

    This Acceptance Test Report (ATR) documents the results of acceptance test procedure WHC-SD-WM-ATR-151. Included in this report is a summary of the tests, the results and issues, the signature and sign- off ATP pages, and a summarized table of the specification vs. ATP section that satisfied the specification.

  14. Acceptance conditions in automated negotiation

    NARCIS (Netherlands)

    Baarslag, T.; Hindriks, K.V.; Jonker, C.M.

    2011-01-01

    In every negotiation with a deadline, one of the negotiating parties has to accept an offer to avoid a break off. A break off is usually an undesirable outcome for both parties, therefore it is important that a negotiator employs a proficient mechanism to decide under which conditions to accept.

  15. Consumer Acceptance of Novel Foods

    NARCIS (Netherlands)

    Fischer, A.R.H.; Reinders, M.J.

    2016-01-01

    The success of novel foods depends to a considerable extent on whether consumers accept those innovations. This chapter provides an overview of current knowledge relevant to consumer acceptance of innovations in food. A broad range of theories and approaches to assess consumer response to

  16. Worldwide nuclear revival and acceptance

    International Nuclear Information System (INIS)

    Geraets, Luc H.; Crommelynck, Yves A.

    2009-01-01

    The current status and trends of the nuclear revival in Europe and abroad are outlined. The development of public opinion in the last decade is playing an important part. This has turned from clear rejection to careful acceptance. Transparency and open communication will be important aspects in the further development of nuclear acceptance. (orig.)

  17. Hawaii Electric System Reliability

    Energy Technology Data Exchange (ETDEWEB)

    Loose, Verne William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Silva Monroy, Cesar Augusto [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2012-08-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers’ views of reliability “worth” and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers’ views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  18. Hawaii electric system reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Silva Monroy, Cesar Augusto; Loose, Verne William

    2012-09-01

    This report addresses Hawaii electric system reliability issues; greater emphasis is placed on short-term reliability but resource adequacy is reviewed in reference to electric consumers' views of reliability %E2%80%9Cworth%E2%80%9D and the reserve capacity required to deliver that value. The report begins with a description of the Hawaii electric system to the extent permitted by publicly available data. Electrical engineering literature in the area of electric reliability is researched and briefly reviewed. North American Electric Reliability Corporation standards and measures for generation and transmission are reviewed and identified as to their appropriateness for various portions of the electric grid and for application in Hawaii. Analysis of frequency data supplied by the State of Hawaii Public Utilities Commission is presented together with comparison and contrast of performance of each of the systems for two years, 2010 and 2011. Literature tracing the development of reliability economics is reviewed and referenced. A method is explained for integrating system cost with outage cost to determine the optimal resource adequacy given customers' views of the value contributed by reliable electric supply. The report concludes with findings and recommendations for reliability in the State of Hawaii.

  19. Improving machinery reliability

    CERN Document Server

    Bloch, Heinz P

    1998-01-01

    This totally revised, updated and expanded edition provides proven techniques and procedures that extend machinery life, reduce maintenance costs, and achieve optimum machinery reliability. This essential text clearly describes the reliability improvement and failure avoidance steps practiced by best-of-class process plants in the U.S. and Europe.

  20. LED system reliability

    NARCIS (Netherlands)

    Driel, W.D. van; Yuan, C.A.; Koh, S.; Zhang, G.Q.

    2011-01-01

    This paper presents our effort to predict the system reliability of Solid State Lighting (SSL) applications. A SSL system is composed of a LED engine with micro-electronic driver(s) that supplies power to the optic design. Knowledge of system level reliability is not only a challenging scientific

  1. Integrated system reliability analysis

    DEFF Research Database (Denmark)

    Gintautas, Tomas; Sørensen, John Dalsgaard

    Specific targets: 1) The report shall describe the state of the art of reliability and risk-based assessment of wind turbine components. 2) Development of methodology for reliability and risk-based assessment of the wind turbine at system level. 3) Describe quantitative and qualitative measures...

  2. Reliability of neural encoding

    DEFF Research Database (Denmark)

    Alstrøm, Preben; Beierholm, Ulrik; Nielsen, Carsten Dahl

    2002-01-01

    The reliability with which a neuron is able to create the same firing pattern when presented with the same stimulus is of critical importance to the understanding of neuronal information processing. We show that reliability is closely related to the process of phaselocking. Experimental results f...

  3. Reliability and Validity of the Temperament and Character Inventory

    Directory of Open Access Journals (Sweden)

    Mahboubeh Dadfar

    2010-10-01

    Full Text Available Objective: The Temperament and Character Inventory (TCI was developed to assess temperament including Novelty Seeking (NS, Harm Avoidance (HA, Reward Dependence (RD, Persistence (PS, and Character including Self-Directedness (SD, Cooperativeness (CO and Self Transcendence (ST dimensions of Cloninger's biopsychosocial model of personality in adults. The purpose of this study was to evaluate the reliability and validity of this inventory. Materials & Methods: In this validity test and standardization study, after translation of TCI into Farsi and back translation, the final form was prepared and administered to 220 students who were selected via simple sampling. Cronbach's alpha procedure and test-retest method was used to assess the reliability, and factor analysis of promax rotation was utilized to determine the validity of the inventory. Correlation of interscales and age with scales of TCI was calculated by Pearson correlation. A comparison of TCI scores between sex and also cross-cultural was down using independent t-test. Results: The alpha cofficients for the inventory ranged from 0.44 for the Persistence scale to 0.81 for the ST scale with a median 0f 0.68. The overall alpha cofficients for the whole inventory was 0.74. The Pearson correlation cofficient for the test-retest on 31 students after two months ranged from 0.53 for Novelty Seeking and Persistence to 0.82 for Harm Avoidance scales and from 0.24 for disorderliness vs regimentation (NS4 to 0.86 for fear of uncertainty vs self-confidene (HA2 subscales. The factor analysis showed six factors. Significant correlations were obtained between scales of Self–Directedness with Harm Avoidance (0.57, Self–Directedness with Cooperativeness (0.46. Conclusion: The current study confirms that Persian version of the Temperament and Character Inventory has satisfactory psychometric properties and acceptable reliability and validity for the use students of university population.

  4. Design reliability engineering

    International Nuclear Information System (INIS)

    Buden, D.; Hunt, R.N.M.

    1989-01-01

    Improved design techniques are needed to achieve high reliability at minimum cost. This is especially true of space systems where lifetimes of many years without maintenance are needed and severe mass limitations exist. Reliability must be designed into these systems from the start. Techniques are now being explored to structure a formal design process that will be more complete and less expensive. The intent is to integrate the best features of design, reliability analysis, and expert systems to design highly reliable systems to meet stressing needs. Taken into account are the large uncertainties that exist in materials, design models, and fabrication techniques. Expert systems are a convenient method to integrate into the design process a complete definition of all elements that should be considered and an opportunity to integrate the design process with reliability, safety, test engineering, maintenance and operator training. 1 fig

  5. Bayesian methods in reliability

    Science.gov (United States)

    Sander, P.; Badoux, R.

    1991-11-01

    The present proceedings from a course on Bayesian methods in reliability encompasses Bayesian statistical methods and their computational implementation, models for analyzing censored data from nonrepairable systems, the traits of repairable systems and growth models, the use of expert judgment, and a review of the problem of forecasting software reliability. Specific issues addressed include the use of Bayesian methods to estimate the leak rate of a gas pipeline, approximate analyses under great prior uncertainty, reliability estimation techniques, and a nonhomogeneous Poisson process. Also addressed are the calibration sets and seed variables of expert judgment systems for risk assessment, experimental illustrations of the use of expert judgment for reliability testing, and analyses of the predictive quality of software-reliability growth models such as the Weibull order statistics.

  6. The reliability of nuclear power plant safety systems

    International Nuclear Information System (INIS)

    Susnik, J.

    1978-01-01

    A criterion was established concerning the protection that nuclear power plant (NPP) safety systems should afford. An estimate of the necessary or adequate reliability of the total complex of safety systems was derived. The acceptable unreliability of auxiliary safety systems is given, provided the reliability built into the specific NPP safety systems (ECCS, Containment) is to be fully utilized. A criterion for the acceptable unreliability of safety (sub)systems which occur in minimum cut sets having three or more components of the analysed fault tree was proposed. A set of input MTBF or MTTF values which fulfil all the set criteria and attain the appropriate overall reliability was derived. The sensitivity of results to input reliability data values was estimated. Numerical reliability evaluations were evaluated by the programs POTI, KOMBI and particularly URSULA, the last being based on Vesely's kinetic fault tree theory. (author)

  7. User acceptance of mobile commerce: an empirical study in Macau

    Science.gov (United States)

    Lai, Ivan K. W.; Lai, Donny C. F.

    2014-06-01

    This study aims to examine the positive and negative factors that can significantly explain user acceptance of mobile commerce (m-commerce) in Macau. A technology acceptance model for m-commerce with five factors is constructed. The proposed model is tested using data collected from 219 respondents. Confirmatory factor analysis is performed to examine the reliability and validity of the model, and structural equation modelling is performed to access the relationship between behaviour intention and each factor. The acceptance of m-commerce is influenced by factors including performance expectancy, social influence, facilitating conditions and privacy concern; while effort expectancy is insignificant in this case. The results of the study are useful for m-commerce service providers to adjust their strategies for promoting m-commerce services. This study contributes to the practice by providing a user technology acceptance model for m-commerce that can be used as a foundation for future research.

  8. The Counseling Center Assessment of Psychological Symptoms (CCAPS-62): Acceptance, feasibility, and initial psychometric properties in a UK student population.

    Science.gov (United States)

    Broglia, Emma; Millings, Abigail; Barkham, Michael

    2017-09-01

    The burden and severity of student mental health continue to increase in parallel with increasing financial pressures on students and services alike. There is a need for a student-specific measure of distress that acknowledges their unique context. This study examined the feasibility, acceptance, and initial psychometric properties of a US measure, the Counseling Center Assessment of Psychological Symptoms (CCAPS), in a UK student sample. A sample of 294 UK help-seeking students from two universities completed the CCAPS-62 and Clinical Outcomes in Routine Evaluation (CORE-10) as a comparator. The factor solution and reliability of the CCAPS-62 were examined. Correlations and clinical boundaries were determined between the CCAPS-62 subscales and CORE-10, and comparisons were made with US published norms. The CCAPS-62 demonstrated a strong factor solution that matched the intended subscales. All subscales had good reliability and correlated significantly with the CORE-10. The agreement on caseness between the two measures was 92.8% with 86.3% reaching clinical threshold on both the CCAPS-62 and CORE-10. Severity was most noticeable for academic distress, depression, anxiety, and social anxiety. Compared to US data, UK students showed higher clinical severity for all psychological symptoms. The CCAPS-62 is a reliable and psychometrically valid assessment measure to use with UK students without revision. The overall distress indicated is similar to that of the CORE-10, but the individual subscales are more informative of specific student concerns including academic distress, social anxiety, and substance abuse. Potential benefits of administering a student-focused assessment measure in student counselling services are discussed. University students attending counselling in the UK demonstrate clinical severity for academic distress, depression, anxiety, and social anxiety. Compared to university students in the US, UK students present with higher clinical severity on

  9. [Reliability and Validity of the Scale for Homophobia in Medicine Students].

    Science.gov (United States)

    Campo-Arias, Adalberto; Lafaurie, María Mercedes; Gaitán-Duarte, Hernando G

    2012-12-01

    There are several scales to quantify homophobia in different populations. However, the reliability and validity of these instruments among Colombian students are unknown. Consequently, this work is intended to assess reliability (inner consistency) as well as the validity of the Scale for Homophobia in Medicine students from a private university in Bogotá (Colombia). Methodological study with 199 Medicine students from 1st to 5th semester that filled out the Homophobia Scale form, the general welfare questionnaire, the Attitude Towards Gays and Lesbians Scale (ATGL), WHO-5 (divergent validity) and the Francis Scale of Attitude Toward Christianity (nomologic validity). Pearson's correlations were computed, the Cronbach's alfa coefficient, the omega coefficient (construct's reliability) and confirmatory factorial analysis. The Scale for Homophobia showed an alpha Cronbach coefficient of 0,785, an omega coefficient of 0,790 and a Pearson correlation with the ATGL of 0,844; with WHO-5, -0,059; and a Francis Scale of Attitude Toward Christianity, 0,187. The Scale toward Homophobia exhibited a relevant factor of 44,7% of the total variance. The Scale for Homophobia showed acceptable reliability and validity. New studies should investigate the stability of the scale and the nomologic validity regarding other constructs. Copyright © 2012 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  10. Validity and reliability of the Academic Motivation Scale in a sample of Slovenian students

    Directory of Open Access Journals (Sweden)

    Melita Puklek Levpušček

    2017-02-01

    Full Text Available In this study we examined construct validity and reliability of the Academic Motivation Scale, College Version (Academic Motivation Scale, AMS-C 28, Vallerand et al., 1992 and its relationship with gender, certainty of study choice and career goals in Slovenian university students. The theoretical basis of AMS is derived from Self-Determination Theory, which identified different types of motivation on a continuum from amotivation to different types of external motivation and intrinsic (self-determined motivation. The AMS measures multidimensional motivational construct and contains seven scales. The validation sample consisted of 324 students of various studies at the University of Ljubljana. Multigroup confirmatory factor analysis showed an acceptable fit of the original 7-factor structure on Slovenian data and measurement invariance across gender. The highest were correlations among the three factors of intrinsic motivation and among the three factors of external motivation. Current certainty of study choice was positively associated with all three factors of intrinsic motivation and identified regulation, and negatively correlated with amotivation. Extrinsic career goals had low to moderate positive correlations with factors of external motivation while intrinsic career goals correlated positively with the three factors of intrinsic motivation, identified and introjected regulation, and negatively with amotivation. Female students had higher scores on intrinsic motivation to accomplish, and identified and introjected regulation than male students. In sum, the AMS C-28 showed good construct and convergent validity and reliability in Slovenian university context.

  11. Consumer acceptance of functional foods

    DEFF Research Database (Denmark)

    Frewer, Lynn J.; Scholderer, Joachim; Lambert, Nigel

    2003-01-01

    In the past, it has been assumed that consumers would accept novel foods if there is a concrete and tangible consumer benefit associated with them, which implies that those functional foods would quickly be accepted. However, there is evidence that individuals are likely to differ in the extent...... to which they are likely to buy products with particular functional properties. Various cross-cultural and demographic differences in acceptance found in the literature are reviewed, as well as barriers to dietary change. In conclusion, it is argued that understanding consumer's risk perceptions...

  12. NDE reliability and advanced NDE technology validation

    International Nuclear Information System (INIS)

    Doctor, S.R.; Deffenbaugh, J.D.; Good, M.S.; Green, E.R.; Heasler, P.G.; Hutton, P.H.; Reid, L.D.; Simonen, F.A.; Spanner, J.C.; Vo, T.V.

    1989-01-01

    This paper reports on progress for three programs: (1) evaluation and improvement in nondestructive examination reliability for inservice inspection of light water reactors (LWR) (NDE Reliability Program), (2) field validation acceptance, and training for advanced NDE technology, and (3) evaluation of computer-based NDE techniques and regional support of inspection activities. The NDE Reliability Program objectives are to quantify the reliability of inservice inspection techniques for LWR primary system components through independent research and establish means for obtaining improvements in the reliability of inservice inspections. The areas of significant progress will be described concerning ASME Code activities, re-analysis of the PISC-II data, the equipment interaction matrix study, new inspection criteria, and PISC-III. The objectives of the second program are to develop field procedures for the AE and SAFT-UT techniques, perform field validation testing of these techniques, provide training in the techniques for NRC headquarters and regional staff, and work with the ASME Code for the use of these advanced technologies. The final program's objective is to evaluate the reliability and accuracy of interpretation of results from computer-based ultrasonic inservice inspection systems, and to develop guidelines for NRC staff to monitor and evaluate the effectiveness of inservice inspections conducted on nuclear power reactors. This program started in the last quarter of FY89, and the extent of the program was to prepare a work plan for presentation to and approval from a technical advisory group of NRC staff

  13. Reliability in perceptual analysis of voice quality.

    Science.gov (United States)

    Bele, Irene Velsvik

    2005-12-01

    This study focuses on speaking voice quality in male teachers (n = 35) and male actors (n = 36), who represent untrained and trained voice users, because we wanted to investigate normal and supranormal voices. In this study, both substantial and methodologic aspects were considered. It includes a method for perceptual voice evaluation, and a basic issue was rater reliability. A listening group of 10 listeners, 7 experienced speech-language therapists, and 3 speech-language therapist students evaluated the voices by 15 vocal characteristics using VA scales. Two sets of voice signals were investigated: text reading (2 loudness levels) and sustained vowel (3 levels). The results indicated a high interrater reliability for most perceptual characteristics. Connected speech was evaluated more reliably, especially at the normal level, but both types of voice signals were evaluated reliably, although the reliability for connected speech was somewhat higher than for vowels. Experienced listeners tended to be more consistent in their ratings than did the student raters. Some vocal characteristics achieved acceptable reliability even with a smaller panel of listeners. The perceptual characteristics grouped in 4 factors reflected perceptual dimensions.

  14. Yüksek Öğrenimde Öğretim Elemanlarının Teknoloji Kabulü ve Kullanımı: Adnan Menderes Üniversitesinde Ampirik Bir Değerlendirme = Faculty's Acceptance and Use of Technology in Higher Education: An Empirical Assessment at Adnan Menderes University

    Directory of Open Access Journals (Sweden)

    Aykut Hamit TURAN, Bengü Emine ÇOLAKOĞLU

    2008-01-01

    Full Text Available For more than 20 years, Information Technologies, especially personal computer and Internet have been employed in all phases of our lives, especially in education. In today's globalizing world, borders among countries have been dissolved as qualified workforce would easily travel from one country to another. These developments required higher education institutions to provide education by using the latest techniques and technologies and educate highly qualified individuals with worldwide accredited diplomas and certificates at an increasing pace. In order to have such graduates, first instructors and academicians at higher institutions should use new Information and Communication Technologies effectively and efficiently and to do that, we need to know why these faculty members would use or prefer not to use such technologies as a personal choice. In this study, Davis' (1989 Technology Acceptance Model (TAM, which has strong socio-psychological theoretical foundations, has been empirically tested with the help of data collected at one of the newly established universities in Turkey. The study is among the first that tests the TAM, and the results generally support the theory empirically.

  15. Market Acceptance of Smart Growth

    Science.gov (United States)

    This report finds that smart growth developments enjoy market acceptance because of stability in prices over time. Housing resales in smart growth developments often have greater appreciation than their conventional suburban counterparts.

  16. L-286, Acceptance Test Record

    International Nuclear Information System (INIS)

    HARMON, B.C.

    2000-01-01

    This document provides a detailed account of how the acceptance testing was conducted for Project L-286, ''200E Area Sanitary Water Plant Effluent Stream Reduction''. The testing of the L-286 instrumentation system was conducted under the direct supervision

  17. Standards regulations and public acceptance

    International Nuclear Information System (INIS)

    Fernandez, E.C.

    1977-01-01

    Spanish nuclear legislation and the associated procedure for the authorization of installations is summarized. Public acceptance is discussed in the context of the needs for and hazards of nuclear energy. (U.K.)

  18. Reliability of construction materials

    International Nuclear Information System (INIS)

    Merz, H.

    1976-01-01

    One can also speak of reliability with respect to materials. While for reliability of components the MTBF (mean time between failures) is regarded as the main criterium, this is replaced with regard to materials by possible failure mechanisms like physical/chemical reaction mechanisms, disturbances of physical or chemical equilibrium, or other interactions or changes of system. The main tasks of the reliability analysis of materials therefore is the prediction of the various failure reasons, the identification of interactions, and the development of nondestructive testing methods. (RW) [de

  19. Structural Reliability Methods

    DEFF Research Database (Denmark)

    Ditlevsen, Ove Dalager; Madsen, H. O.

    The structural reliability methods quantitatively treat the uncertainty of predicting the behaviour and properties of a structure given the uncertain properties of its geometry, materials, and the actions it is supposed to withstand. This book addresses the probabilistic methods for evaluation...... of structural reliability, including the theoretical basis for these methods. Partial safety factor codes under current practice are briefly introduced and discussed. A probabilistic code format for obtaining a formal reliability evaluation system that catches the most essential features of the nature...... of the uncertainties and their interplay is the developed, step-by-step. The concepts presented are illustrated by numerous examples throughout the text....

  20. Reliability and mechanical design

    International Nuclear Information System (INIS)

    Lemaire, Maurice

    1997-01-01

    A lot of results in mechanical design are obtained from a modelisation of physical reality and from a numerical solution which would lead to the evaluation of needs and resources. The goal of the reliability analysis is to evaluate the confidence which it is possible to grant to the chosen design through the calculation of a probability of failure linked to the retained scenario. Two types of analysis are proposed: the sensitivity analysis and the reliability analysis. Approximate methods are applicable to problems related to reliability, availability, maintainability and safety (RAMS)

  1. RTE - 2013 Reliability Report

    International Nuclear Information System (INIS)

    Denis, Anne-Marie

    2014-01-01

    RTE publishes a yearly reliability report based on a standard model to facilitate comparisons and highlight long-term trends. The 2013 report is not only stating the facts of the Significant System Events (ESS), but it moreover underlines the main elements dealing with the reliability of the electrical power system. It highlights the various elements which contribute to present and future reliability and provides an overview of the interaction between the various stakeholders of the Electrical Power System on the scale of the European Interconnected Network. (author)

  2. Application of Reliability in Breakwater Design

    DEFF Research Database (Denmark)

    Christiani, Erik

    methods to design certain types of breakwaters. Reliability analyses of the main armour and toe berm interaction is exemplified to show the effect of a multiple set of failure mechanisms. First the limit state equations of the main armour and toe interaction are derived from laboratory tests performed...... response, but in one area information has been lacking; bearing capacity has not been treated in depth in a probabilistic manner for breakwaters. Reliability analysis of conventional rubble mound breakwaters and conventional vertical breakwaters is exemplified for the purpose of establishing new ways...... by Bologna University. Thereafter a multiple system of failure for the interaction is established. Relevant stochastic parameters are characterized prior to the reliability evaluation. Application of reliability in crown wall design is illustrated by deriving relevant single foundation failure modes...

  3. ESCAF - Failure simulation and reliability calculation device

    International Nuclear Information System (INIS)

    Laviron, A.; Berard, C.; Quenee, R.

    1979-01-01

    Reliability studies of nuclear power plant safety functions have, up to now, required the use of large computers. As they are of universal use, these big machines are not very well adapted to deal with reliability problems at low cost. ESCAF has been developed to be substituted for large computers in order to save time and money. ESCAF is a small electronic device which can be used in connection with a minicomputer. It allows to perform complex system reliability analysis (qualitative and quantitative) and to study critical element influences such as common cause failures. In this paper, the device is described and its features and abilities are outlined: easy to implement, swift running, low working cost. Its application range concerns all cases when a good reliability is needed

  4. Public acceptance of small reactors

    International Nuclear Information System (INIS)

    McDougall, D.S.

    1997-01-01

    The success of any nuclear program requires acceptance by the local public and all levels of government involved in the decision to initiate a reactor program. Public acceptance of a nuclear energy source is a major challenge in successful initiation of a small reactor program. In AECL's experience, public acceptance will not be obtained until the public is convinced that the specific nuclear program is needed, safe and economic and environmental benefit to the community. The title of public acceptance is misleading. The objective of the program is a fully informed public. The program proponent cannot force public acceptance, which is beyond his control. He can, however, ensure that the public is informed. Once information has begun to flow to the public by various means as will be explained later, the proponent is responsible to ensure that the information that is provided by him and by others is accurate. Most importantly, and perhaps most difficult to accomplish, the proponent must develop a consultative process that allows the proponent and the public to agree on actions that are acceptable to the proponent and the community

  5. Intra-observer reliability and agreement of manual and digital orthodontic model analysis.

    Science.gov (United States)

    Koretsi, Vasiliki; Tingelhoff, Linda; Proff, Peter; Kirschneck, Christian

    2018-01-23

    Digital orthodontic model analysis is gaining acceptance in orthodontics, but its reliability is dependent on the digitalisation hardware and software used. We thus investigated intra-observer reliability and agreement / conformity of a particular digital model analysis work-flow in relation to traditional manual plaster model analysis. Forty-eight plaster casts of the upper/lower dentition were collected. Virtual models were obtained with orthoX®scan (Dentaurum) and analysed with ivoris®analyze3D (Computer konkret). Manual model analyses were done with a dial caliper (0.1 mm). Common parameters were measured on each plaster cast and its virtual counterpart five times each by an experienced observer. We assessed intra-observer reliability within method (ICC), agreement/conformity between methods (Bland-Altman analyses and Lin's concordance correlation), and changing bias (regression analyses). Intra-observer reliability was substantial within each method (ICC ≥ 0.7), except for five manual outcomes (12.8 per cent). Bias between methods was statistically significant, but less than 0.5 mm for 87.2 per cent of the outcomes. In general, larger tooth sizes were measured digitally. Total difference maxilla and mandible had wide limits of agreement (-3.25/6.15 and -2.31/4.57 mm), but bias between methods was mostly smaller than intra-observer variation within each method with substantial conformity of manual and digital measurements in general. No changing bias was detected. Although both work-flows were reliable, the investigated digital work-flow proved to be more reliable and yielded on average larger tooth sizes. Averaged differences between methods were within 0.5 mm for directly measured outcomes but wide ranges are expected for some computed space parameters due to cumulative error. © The Author 2017. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com

  6. Approach to reliability assessment

    International Nuclear Information System (INIS)

    Green, A.E.; Bourne, A.J.

    1975-01-01

    Experience has shown that reliability assessments can play an important role in the early design and subsequent operation of technological systems where reliability is at a premium. The approaches to and techniques for such assessments, which have been outlined in the paper, have been successfully applied in variety of applications ranging from individual equipments to large and complex systems. The general approach involves the logical and systematic establishment of the purpose, performance requirements and reliability criteria of systems. This is followed by an appraisal of likely system achievment based on the understanding of different types of variational behavior. A fundamental reliability model emerges from the correlation between the appropriate Q and H functions for performance requirement and achievement. This model may cover the complete spectrum of performance behavior in all the system dimensions

  7. The rating reliability calculator

    Directory of Open Access Journals (Sweden)

    Solomon David J

    2004-04-01

    Full Text Available Abstract Background Rating scales form an important means of gathering evaluation data. Since important decisions are often based on these evaluations, determining the reliability of rating data can be critical. Most commonly used methods of estimating reliability require a complete set of ratings i.e. every subject being rated must be rated by each judge. Over fifty years ago Ebel described an algorithm for estimating the reliability of ratings based on incomplete data. While his article has been widely cited over the years, software based on the algorithm is not readily available. This paper describes an easy-to-use Web-based utility for estimating the reliability of ratings based on incomplete data using Ebel's algorithm. Methods The program is available public use on our server and the source code is freely available under GNU General Public License. The utility is written in PHP, a common open source imbedded scripting language. The rating data can be entered in a convenient format on the user's personal computer that the program will upload to the server for calculating the reliability and other statistics describing the ratings. Results When the program is run it displays the reliability, number of subject rated, harmonic mean number of judges rating each subject, the mean and standard deviation of the averaged ratings per subject. The program also displays the mean, standard deviation and number of ratings for each subject rated. Additionally the program will estimate the reliability of an average of a number of ratings for each subject via the Spearman-Brown prophecy formula. Conclusion This simple web-based program provides a convenient means of estimating the reliability of rating data without the need to conduct special studies in order to provide complete rating data. I would welcome other researchers revising and enhancing the program.

  8. Structural systems reliability analysis

    International Nuclear Information System (INIS)

    Frangopol, D.

    1975-01-01

    For an exact evaluation of the reliability of a structure it appears necessary to determine the distribution densities of the loads and resistances and to calculate the correlation coefficients between loads and between resistances. These statistical characteristics can be obtained only on the basis of a long activity period. In case that such studies are missing the statistical properties formulated here give upper and lower bounds of the reliability. (orig./HP) [de

  9. Reliability and maintainability

    International Nuclear Information System (INIS)

    1994-01-01

    Several communications in this conference are concerned with nuclear plant reliability and maintainability; their titles are: maintenance optimization of stand-by Diesels of 900 MW nuclear power plants; CLAIRE: an event-based simulation tool for software testing; reliability as one important issue within the periodic safety review of nuclear power plants; design of nuclear building ventilation by the means of functional analysis; operation characteristic analysis for a power industry plant park, as a function of influence parameters

  10. Reliability data book

    International Nuclear Information System (INIS)

    Bento, J.P.; Boerje, S.; Ericsson, G.; Hasler, A.; Lyden, C.O.; Wallin, L.; Poern, K.; Aakerlund, O.

    1985-01-01

    The main objective for the report is to improve failure data for reliability calculations as parts of safety analyses for Swedish nuclear power plants. The work is based primarily on evaluations of failure reports as well as information provided by the operation and maintenance staff of each plant. In the report are presented charts of reliability data for: pumps, valves, control rods/rod drives, electrical components, and instruments. (L.E.)

  11. Ultra Reliable Closed Loop Life Support for Long Space Missions

    Science.gov (United States)

    Jones, Harry W.; Ewert, Michael K.

    2010-01-01

    Spacecraft human life support systems can achieve ultra reliability by providing sufficient spares to replace all failed components. The additional mass of spares for ultra reliability is approximately equal to the original system mass, provided that the original system reliability is not too low. Acceptable reliability can be achieved for the Space Shuttle and Space Station by preventive maintenance and by replacing failed units. However, on-demand maintenance and repair requires a logistics supply chain in place to provide the needed spares. In contrast, a Mars or other long space mission must take along all the needed spares, since resupply is not possible. Long missions must achieve ultra reliability, a very low failure rate per hour, since they will take years rather than weeks and cannot be cut short if a failure occurs. Also, distant missions have a much higher mass launch cost per kilogram than near-Earth missions. Achieving ultra reliable spacecraft life support systems with acceptable mass will require a well-planned and extensive development effort. Analysis must determine the reliability requirement and allocate it to subsystems and components. Ultra reliability requires reducing the intrinsic failure causes, providing spares to replace failed components and having "graceful" failure modes. Technologies, components, and materials must be selected and designed for high reliability. Long duration testing is needed to confirm very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The system must be designed, developed, integrated, and tested with system reliability in mind. Maintenance and reparability of failed units must not add to the probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass should start soon since it must be a long term effort.

  12. Multidisciplinary System Reliability Analysis

    Science.gov (United States)

    Mahadevan, Sankaran; Han, Song; Chamis, Christos C. (Technical Monitor)

    2001-01-01

    The objective of this study is to develop a new methodology for estimating the reliability of engineering systems that encompass multiple disciplines. The methodology is formulated in the context of the NESSUS probabilistic structural analysis code, developed under the leadership of NASA Glenn Research Center. The NESSUS code has been successfully applied to the reliability estimation of a variety of structural engineering systems. This study examines whether the features of NESSUS could be used to investigate the reliability of systems in other disciplines such as heat transfer, fluid mechanics, electrical circuits etc., without considerable programming effort specific to each discipline. In this study, the mechanical equivalence between system behavior models in different disciplines are investigated to achieve this objective. A new methodology is presented for the analysis of heat transfer, fluid flow, and electrical circuit problems using the structural analysis routines within NESSUS, by utilizing the equivalence between the computational quantities in different disciplines. This technique is integrated with the fast probability integration and system reliability techniques within the NESSUS code, to successfully compute the system reliability of multidisciplinary systems. Traditional as well as progressive failure analysis methods for system reliability estimation are demonstrated, through a numerical example of a heat exchanger system involving failure modes in structural, heat transfer and fluid flow disciplines.

  13. Analysis and Application of Reliability

    International Nuclear Information System (INIS)

    Jeong, Hae Seong; Park, Dong Ho; Kim, Jae Ju

    1999-05-01

    This book tells of analysis and application of reliability, which includes definition, importance and historical background of reliability, function of reliability and failure rate, life distribution and assumption of reliability, reliability of unrepaired system, reliability of repairable system, sampling test of reliability, failure analysis like failure analysis by FEMA and FTA, and cases, accelerated life testing such as basic conception, acceleration and acceleration factor, and analysis of accelerated life testing data, maintenance policy about alternation and inspection.

  14. Cosmology in the plasma universe

    International Nuclear Information System (INIS)

    Alfven, H.

    1987-05-01

    Space observations have opened the spectral regions of X-rays and γ-rays, which are produced by plasma processes. The Plasma Universe derived from observations in these regions is drastically different from the now generally accepted 'Visual Light Universe' based on visual light observations alone. Historically this transitions can be compared only to the transition from the geocentric to the heliocentric cosmology. The purpose of this paper is to discuss what criteria a cosmological theory must satisfy in order to be acceptable in the Plasma Universe. (author)

  15. Preparing to Accept Research Data: Creating Guidelines for Librarians

    Directory of Open Access Journals (Sweden)

    Laura B. Palumbo

    2015-11-01

    Full Text Available Rutgers University Libraries have recognized the need to expand their current research data services into a well-documented and well-supported service available to the Rutgers research community. In 2005, Rutgers University Libraries created RUcore, Rutgers University Community Repository, which has served as the University’s formal repository for institutional scholarship, special collections, and Electronic Theses & Dissertations. With the impetus of the 2010 NSF directive for research data sharing and preservation, RUcore development was extended to accept research data content. Ingest of pilot data projects began in 2010 via a librarian-mediated process. In order to provide a better defined workflow and mission for research data services, in July 2014, the Rutgers University Librarian organized a Task Force to investigate the evaluation process for technical, legal, and confidential issues involved in research data acceptance, and to establish an administrative and evaluation framework for the deposit of research data. After a review of 35 repositories using 34 criteria, the Task Force drafted a plan for research data acceptance which proposes wide-spread acceptance of mediated data projects, and prepares for future self-deposit in an online interface. This paper will discuss the issues addressed by the Task Force; acknowledging ownership of data through an institutional data policy, preventing exposure of confidential or sensitive data, establishing a reconfigured data team, requirements for storage capacity and funding, creating a workflow which includes collaboration with research offices, and offering guidance for both researchers and librarians working with research data.

  16. Generation XXX: Pornography Acceptance and Use among Emerging Adults

    Science.gov (United States)

    Carroll, Jason S.; Padilla-Walker, Laura M.; Nelson, Larry J.; Olson, Chad D.; McNamara Barry, Carolyn; Madsen, Stephanie D.

    2008-01-01

    This study examined correlates of pornography acceptance and use within a normative (nonclinical) population of emerging adults (individuals aged 18-26). Participants included 813 university students (500 women; M age = 20 years) recruited from six college sites across the United States. Participants completed online questionnaires regarding their…

  17. Syrians' Acceptance of Digital Lectures: A Case Study

    Science.gov (United States)

    Ramadan, Reem

    2016-01-01

    Technology-based learning modules are mostly challenged by their acceptance. A single-case study and mixed research method are used to explore a unique situation of applying digital lectures at the postgraduate Programmes at the Faculty of Tourism at Damascus University as a solution for brain drain in the Syrian higher education system. Results…

  18. Student teachers' understanding and acceptance of evolution and ...

    African Journals Online (AJOL)

    The focus of this study was student teachers at a South African university enrolled in a Bachelor of Education (B.Ed.) programme and a Postgraduate Certificate in Education (PGCE), respectively. The purpose of this study was to explore students' understanding and acceptance of evolution and beliefs about the nature of ...

  19. how acceptable are the prevention of mother to child transmission

    African Journals Online (AJOL)

    or mother continue to use ARV.9 The baby's chance of survival is increased ... and acceptability of the infant feeding options for HIV positive mothers. Pretesting of the questionnaire was conducted among pregnant women attending ANC at the University College ... when any cell had a value less than five. Student's t test.

  20. Examining Acceptance of an Integrated Personal Health Record (PHR)

    Science.gov (United States)

    Morton, Alicia A.

    2011-01-01

    Objective: The purpose of this project was to examine the practice question, "What are the factors influencing acceptance of integrated PHRs for self-care management among the Howard University Hospital (HUH) Diabetes Treatment Clinic (DTC) patients?" These factors include a) demographic characteristics, b) computer…

  1. Patients' reasons for accepting a free community pharmacy asthma service

    DEFF Research Database (Denmark)

    Kaae, Susanne; Sporrong, Sofia Kälvemark

    2015-01-01

    few studies have been conducted so far to explore why patients accept or decline offers of cognitive services at the pharmacy counter. Objective To explore patients’ reasons for accepting a particular cognitive service (the Inhaler Technique Assessment Service) a service intended to detect inhalation...... with 24 patients suffering mainly from asthma and COPD. Researchers from Copenhagen University conducted 11 long interviews and pharmacy internship students from Copenhagen University carried out 13 short interviews. The interviews were analyzed using descriptive analysis. Main outcome measure Patients......’ perceived needs of an inhalation counseling service as well as their motivation for accepting the service, including their accounts of how the service was orally offered by staff. Results The majority of participants were used to using inhaler devices. The participants felt, for several reasons, little need...

  2. Proposed reliability cost model

    Science.gov (United States)

    Delionback, L. M.

    1973-01-01

    The research investigations which were involved in the study include: cost analysis/allocation, reliability and product assurance, forecasting methodology, systems analysis, and model-building. This is a classic example of an interdisciplinary problem, since the model-building requirements include the need for understanding and communication between technical disciplines on one hand, and the financial/accounting skill categories on the other. The systems approach is utilized within this context to establish a clearer and more objective relationship between reliability assurance and the subcategories (or subelements) that provide, or reenforce, the reliability assurance for a system. Subcategories are further subdivided as illustrated by a tree diagram. The reliability assurance elements can be seen to be potential alternative strategies, or approaches, depending on the specific goals/objectives of the trade studies. The scope was limited to the establishment of a proposed reliability cost-model format. The model format/approach is dependent upon the use of a series of subsystem-oriented CER's and sometimes possible CTR's, in devising a suitable cost-effective policy.

  3. Heroic Reliability Improvement in Manned Space Systems

    Science.gov (United States)

    Jones, Harry W.

    2017-01-01

    System reliability can be significantly improved by a strong continued effort to identify and remove all the causes of actual failures. Newly designed systems often have unexpected high failure rates which can be reduced by successive design improvements until the final operational system has an acceptable failure rate. There are many causes of failures and many ways to remove them. New systems may have poor specifications, design errors, or mistaken operations concepts. Correcting unexpected problems as they occur can produce large early gains in reliability. Improved technology in materials, components, and design approaches can increase reliability. The reliability growth is achieved by repeatedly operating the system until it fails, identifying the failure cause, and fixing the problem. The failure rate reduction that can be obtained depends on the number and the failure rates of the correctable failures. Under the strong assumption that the failure causes can be removed, the decline in overall failure rate can be predicted. If a failure occurs at the rate of lambda per unit time, the expected time before the failure occurs and can be corrected is 1/lambda, the Mean Time Before Failure (MTBF). Finding and fixing a less frequent failure with the rate of lambda/2 per unit time requires twice as long, time of 1/(2 lambda). Cutting the failure rate in half requires doubling the test and redesign time and finding and eliminating the failure causes.Reducing the failure rate significantly requires a heroic reliability improvement effort.

  4. Nuclear Energy and Public Acceptance

    International Nuclear Information System (INIS)

    Daifuku, K.

    2002-01-01

    The continued use of nuclear power in the European Union and elsewhere requires an adequate level of public and political acceptance. A lack of acceptance is often mistakenly cited as a reason for the slowdown in nuclear power plant construction in Western Europe and as a justification for abandoning nuclear power. In fact, the reasons for the slowdown have more to do with the following two factors: Plentiful supplies of low-priced natural gas, making gas-fired power plants a more attractive investment choice; more than adequate supplies of electricity which have curbed the need for the construction of new plant of any kind. In general, moves towards a withdrawal from nuclear in certain Community countries have been due to party political pressures and have not been a response to public opposition to nuclear. In addition, opinion polls do not show widespread public opposition to the use of nuclear power. Figures consistently indicate that the use of nuclear power does not come high on the list of most people's main worries. Their main concerns focus on other issues such as crime and financial problems. In the main, electricity is taken for granted in the industrialised world. Electric power only becomes an issue when there is a threat of shortages. So if public acceptance is not the main obstacle, what is? Political acceptance is an integral part of the process in which nuclear becomes acceptable or not. The relationship between public and political acceptance and the role of the industry in this context, on how to foster a better trialogue, will be examined. (author)

  5. Patient acceptance of awake craniotomy.

    Science.gov (United States)

    Wrede, Karsten H; Stieglitz, Lennart H; Fiferna, Antje; Karst, Matthias; Gerganov, Venelin M; Samii, Madjid; von Gösseln, Hans-Henning; Lüdemann, Wolf O

    2011-12-01

    The aim of this study was to objectively assess the patients' acceptance for awake craniotomy in a group of neurosurgical patients, who underwent this procedure for removal of lesions in or close to eloquent brain areas. Patients acceptance for awake craniotomy under local anesthesia and conscious sedation was assessed by a formal questionnaire (PPP33), initially developed for general surgery patients. The results are compared to a group of patients who had brain surgery under general anesthesia and to previously published data. The awake craniotomy (AC) group consisted of 37 male and 9 female patients (48 craniotomies) with age ranging from 18 to 71 years. The general anesthesia (GA) group consisted of 26 male and 15 female patients (43 craniotomies) with age ranging from 26 to 83 years. All patients in the study were included in the questionnaire analysis. In comparison to GA the overall PPP33 score for AC was higher (p=0.07), suggesting better overall acceptance for AC. The subscale scores for AC were also significantly better compared to GA for the two subscales "postoperative pain" (p=0.02) and "physical disorders" (p=0.01) and equal for the other 6 subscales. The results of the overall mean score and the scores for the subscales of the PPP33 questionnaire verify good patients' acceptance for AC. Previous studies have shown good patients' acceptance for awake craniotomy, but only a few times using formal approaches. By utilizing a formal questionnaire we could verify good patient acceptance for awake craniotomy for the treatment of brain tumors in or close to eloquent areas. This is a novel approach that substantiates previously published experiences. Copyright © 2011 Elsevier B.V. All rights reserved.

  6. Text recycling: acceptable or misconduct?

    Science.gov (United States)

    Harriman, Stephanie; Patel, Jigisha

    2014-08-16

    Text recycling, also referred to as self-plagiarism, is the reproduction of an author's own text from a previous publication in a new publication. Opinions on the acceptability of this practice vary, with some viewing it as acceptable and efficient, and others as misleading and unacceptable. In light of the lack of consensus, journal editors often have difficulty deciding how to act upon the discovery of text recycling. In response to these difficulties, we have created a set of guidelines for journal editors on how to deal with text recycling. In this editorial, we discuss some of the challenges of developing these guidelines, and how authors can avoid undisclosed text recycling.

  7. Toward an acceptable nuclear future

    International Nuclear Information System (INIS)

    Weinberg, A.M.

    1977-11-01

    The nuclear option is in danger of being foreclosed. The trend toward antinuclearism may be reversed if concerns about low-level radiation insult can be shown ultimately to be without foundation; evidence for this speculation is presented. Nevertheless it is suggested that the nuclear enterprise itself must propose new initiatives to increase the acceptability of nuclear energy. A key element of an acceptable nuclear future is cluster siting of reactors. This siting plan might be achieved by confining new reactors essentially to existing sites

  8. The Americleft Speech Project: A Training and Reliability Study.

    Science.gov (United States)

    Chapman, Kathy L; Baylis, Adriane; Trost-Cardamone, Judith; Cordero, Kelly Nett; Dixon, Angela; Dobbelsteyn, Cindy; Thurmes, Anna; Wilson, Kristina; Harding-Bell, Anne; Sweeney, Triona; Stoddard, Gregory; Sell, Debbie

    2016-01-01

    To describe the results of two reliability studies and to assess the effect of training on interrater reliability scores. The first study (1) examined interrater and intrarater reliability scores (weighted and unweighted kappas) and (2) compared interrater reliability scores before and after training on the use of the Cleft Audit Protocol for Speech-Augmented (CAPS-A) with British English-speaking children. The second study examined interrater and intrarater reliability on a modified version of the CAPS-A (CAPS-A Americleft Modification) with American and Canadian English-speaking children. Finally, comparisons were made between the interrater and intrarater reliability scores obtained for Study 1 and Study 2. The participants were speech-language pathologists from the Americleft Speech Project. In Study 1, interrater reliability scores improved for 6 of the 13 parameters following training on the CAPS-A protocol. Comparison of the reliability results for the two studies indicated lower scores for Study 2 compared with Study 1. However, this appeared to be an artifact of the kappa statistic that occurred due to insufficient variability in the reliability samples for Study 2. When percent agreement scores were also calculated, the ratings appeared similar across Study 1 and Study 2. The findings of this study suggested that improvements in interrater reliability could be obtained following a program of systematic training. However, improvements were not uniform across all parameters. Acceptable levels of reliability were achieved for those parameters most important for evaluation of velopharyngeal function.

  9. Parts and Components Reliability Assessment: A Cost Effective Approach

    Science.gov (United States)

    Lee, Lydia

    2009-01-01

    System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

  10. Schulische und nicht-schulische Prädiktoren für die Studienplatzzusage an der Universität Witten / Herdecke - Ergebnisse einer QUEST-Analyse [Academic and non-academic predictors for acceptance to medical studies at Witten/Herdecke University - findings of a QUEST-analysis

    Directory of Open Access Journals (Sweden)

    Hofmann, Marzellus

    2007-11-01

    Full Text Available [english] Aims: Changes within the German Higher Education Framework act increasingly attract notice to the fact that the debate on different methods of selecting students lies in the responsibility of german medical schools. For more than 20 years the University of Witten/Herdecke has adhered to its own concept and procedure relating to its choice of students. Since 2005 this application procedure consists of a written and an oral application phase (assessment center. Within this study a retrospective classification of all applicants in the year 2005 was conducted, with the objective of finding academic and non-academic predictors for acceptance at Witten/Herdecke. Methods: All 172 applicants of the assessment center received a questionnaire asking for: age, gender, high school graduation mark, type of school, main school subjects, intended career, attendance at open house, parent graduation and profession. All duly completed questionnaires were classified according to the QUEST model from the viewpoint of acceptance versus refusal to medical studies at Witten/Herdecke. Outcomes: The QUEST model classifies the items of the questionnaire in sequence of declining power and in coherence to the targeted variable (acceptance. Affiliated with an increased probability of acceptance were: high school mark = 1.3, Steiner and Montessori schools, absence at open house, intended career as researcher and natural/social sciences and languages as main school subjects. Predictor sensitivity was 0.53, specificity reached 0.92. The positive predictive value accounted for 0.77, whereas the negative predictive value was 0.83. Conclusions: The high school graduation mark shows to be of high significance for the admission process at the University of Witten/Herdecke. Furthermore factors such as type of school, intended career and main school subjects play a major role. The high negative predictive value points out that the QUEST analysis is not suitable for

  11. Coefficient Alpha: A Reliability Coefficient for the 21st Century?

    Science.gov (United States)

    Yang, Yanyun; Green, Samuel B.

    2011-01-01

    Coefficient alpha is almost universally applied to assess reliability of scales in psychology. We argue that researchers should consider alternatives to coefficient alpha. Our preference is for structural equation modeling (SEM) estimates of reliability because they are informative and allow for an empirical evaluation of the assumptions…

  12. Developing an acceptability assessment of preventive dental treatments.

    Science.gov (United States)

    Hyde, Susan; Gansky, Stuart A; Gonzalez-Vargas, Maria J; Husting, Sheila R; Cheng, Nancy F; Millstein, Susan G; Adams, Sally H

    2009-01-01

    Early childhood caries (ECC) is very prevalent among young Hispanic children. ECC is amenable to a variety of preventive procedures, yet many Hispanic families underutilize dental services. Acceptability research may assist in health care planning and resource allocation by identifying patient preferences among efficacious treatments with the goal of improving their utilization. The purposes of this study were (a) to develop a culturally competent acceptability assessment instrument, directed toward the caregivers of young Hispanic children, for five preventive dental treatments for ECC and (b) to test the instrument's reliability and validity. An instrument of five standard treatments known to prevent ECC was developed, translated, reviewed by focus groups, and pilot tested, then tested for reliability The instrument included illustrated cards, brief video clips, and samples of the treatments and was culturally appropriate for low-income Hispanic caregivers. In addition to determining the acceptability of the five treatments individually, the treatments were also presented as paired comparisons. Focus groups and debriefing interviews following the pilot tests established that the instrument has good face validity. The illustrated cards, product samples, and video demonstrations of the five treatments resulted in an instrument possessing good content validity. The instrument has good to excellent test-retest reliability, with identical time 1-time 2 responses for each of the five treatments 92 percent of the time (range 87 to 97 percent), and the same treatment of the paired comparisons preferred 75 percent of the time (range 61 to 90 percent). The acceptability instrument described is reliable and valid and may be useful in program planning efforts to identify and increase the utilization of preferred ECC preventive treatments for target populations.

  13. Development of the Parental Acceptance Questionnaire (6-PAQ)

    OpenAIRE

    Greene, Ryan L.

    2013-01-01

    Acceptance and commitment therapy (ACT) is an empirically based psychological intervention established as effective in the treatment of a number of clinical problems. ACT has been utilized with parents in a variety of contexts, thus creating a need to assess ACT-pertinent factors within parenting frameworks. However, a psychometrically sound measure designed to assess parental psychological flexibility is currently unavailable. The present study sought to develop a reliable and valid measure ...

  14. Reliability Centered Maintenance - Methodologies

    Science.gov (United States)

    Kammerer, Catherine C.

    2009-01-01

    Journal article about Reliability Centered Maintenance (RCM) methodologies used by United Space Alliance, LLC (USA) in support of the Space Shuttle Program at Kennedy Space Center. The USA Reliability Centered Maintenance program differs from traditional RCM programs because various methodologies are utilized to take advantage of their respective strengths for each application. Based on operational experience, USA has customized the traditional RCM methodology into a streamlined lean logic path and has implemented the use of statistical tools to drive the process. USA RCM has integrated many of the L6S tools into both RCM methodologies. The tools utilized in the Measure, Analyze, and Improve phases of a Lean Six Sigma project lend themselves to application in the RCM process. All USA RCM methodologies meet the requirements defined in SAE JA 1011, Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes. The proposed article explores these methodologies.

  15. Issues in cognitive reliability

    International Nuclear Information System (INIS)

    Woods, D.D.; Hitchler, M.J.; Rumancik, J.A.

    1984-01-01

    This chapter examines some problems in current methods to assess reactor operator reliability at cognitive tasks and discusses new approaches to solve these problems. The two types of human failures are errors in the execution of an intention and errors in the formation/selection of an intention. Topics considered include the types of description, error correction, cognitive performance and response time, the speed-accuracy tradeoff function, function based task analysis, and cognitive task analysis. One problem of human reliability analysis (HRA) techniques in general is the question of what are the units of behavior whose reliability are to be determined. A second problem for HRA is that people often detect and correct their errors. The use of function based analysis, which maps the problem space for plant control, is recommended

  16. Reliability issues in PACS

    Science.gov (United States)

    Taira, Ricky K.; Chan, Kelby K.; Stewart, Brent K.; Weinberg, Wolfram S.

    1991-07-01

    Reliability is an increasing concern when moving PACS from the experimental laboratory to the clinical environment. Any system downtime may seriously affect patient care. The authors report on the several classes of errors encountered during the pre-clinical release of the PACS during the past several months and present the solutions implemented to handle them. The reliability issues discussed include: (1) environmental precautions, (2) database backups, (3) monitor routines of critical resources and processes, (4) hardware redundancy (networks, archives), and (5) development of a PACS quality control program.

  17. Reliability Parts Derating Guidelines

    Science.gov (United States)

    1982-06-01

    226-30, October 1974. 66 I, 26. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser Engineering and...Vol. R-23, No. 4, 226-30, October 1974. 28. "Reliability of GAAS Injection Lasers", De Loach , B. C., Jr., 1973 IEEE/OSA Conference on Laser...opnatien ot 󈨊 deg C, mounted on a 4-inach square 0.250~ inch thick al~loy alum~nusi panel.. This mounting technique should be L~ ken into cunoidur~tiou

  18. The Assumption of a Reliable Instrument and Other Pitfalls to Avoid When Considering the Reliability of Data

    Science.gov (United States)

    Nimon, Kim; Zientek, Linda Reichwein; Henson, Robin K.

    2012-01-01

    The purpose of this article is to help researchers avoid common pitfalls associated with reliability including incorrectly assuming that (a) measurement error always attenuates observed score correlations, (b) different sources of measurement error originate from the same source, and (c) reliability is a function of instrumentation. To accomplish our purpose, we first describe what reliability is and why researchers should care about it with focus on its impact on effect sizes. Second, we review how reliability is assessed with comment on the consequences of cumulative measurement error. Third, we consider how researchers can use reliability generalization as a prescriptive method when designing their research studies to form hypotheses about whether or not reliability estimates will be acceptable given their sample and testing conditions. Finally, we discuss options that researchers may consider when faced with analyzing unreliable data. PMID:22518107

  19. Nitrogen trailer acceptance test report

    International Nuclear Information System (INIS)

    Kostelnik, A.J.

    1996-01-01

    This Acceptance Test Report documents compliance with the requirements of specification WHC-S-0249. The equipment was tested according to WHC-SD-WM-ATP-108 Rev.0. The equipment being tested is a portable contained nitrogen supply. The test was conducted at Norco's facility

  20. Consumer Acceptability Of Irradiated Foods

    International Nuclear Information System (INIS)

    Awoyinka, A.; Akingbohungbe, A.E.

    1994-01-01

    Three commonly used food items; maize, beans and smoked fish were irradiated and consumer acceptability was tested through a questionnaire method. Subjects were residents in Ile-Ife, Nigeria. Respondents attitudes towards the processing and tasting of the food were very positive and the possibility of marketing the foods was suggested by them

  1. W-025, acceptance test report

    International Nuclear Information System (INIS)

    Roscha, V.

    1994-01-01

    This acceptance test report (ATR) has been prepared to establish the results of the field testing conducted on W-025 to demonstrate that the electrical/instrumentation systems functioned as intended by design. This is part of the RMW Land Disposal Facility

  2. Safety culture and public acceptance

    International Nuclear Information System (INIS)

    Mikhalevich, Alexander A.

    2002-01-01

    After the Chernobyl NPP accident a public acceptance has become a key factor in nuclear power development all over the world. Therefore, nuclear safety culture should be based not only on technical principles, responsibilities, supervision, regulatory provisions, emergency preparedness, but the public awareness of minimum risk during the operation and decommissioning of NPPs, radioactive waste management, etc. (author)

  3. Euthanasia Acceptance: An Attitudinal Inquiry.

    Science.gov (United States)

    Klopfer, Fredrick J.; Price, William F.

    The study presented was conducted to examine potential relationships between attitudes regarding the dying process, including acceptance of euthanasia, and other attitudinal or demographic attributes. The data of the survey was comprised of responses given by 331 respondents to a door-to-door interview. Results are discussed in terms of preferred…

  4. AAL- technology acceptance through experience

    NARCIS (Netherlands)

    Huldtgren, A.; Ascencio San Pedro, G.; Pohlmeyer, A.E.; Romero Herrera, N.A.

    2014-01-01

    Despite substantial research and development of Ambient Assisted Living (AAL) technologies, their acceptance remains low. This is partially caused by a lack of accounting for users' needs and values, and the social contexts these systems are to be embedded in. Participatory design has some potential

  5. Energy justice: Participation promotes acceptance

    Science.gov (United States)

    Baxter, Jamie

    2017-08-01

    Wind turbines have been a go-to technology for addressing climate change, but they are increasingly a source of frustration for all stakeholders. While community ownership is often lauded as a panacea for maximizing turbine acceptance, a new study suggests that decision-making involvement — procedural fairness — matters most.

  6. Worldwide nuclear revival and acceptance

    International Nuclear Information System (INIS)

    Geraets, Luc H.; Crommelynck, Yves A.

    2010-01-01

    The paper outlines the current status and trends of the nuclear revival in Europe and abroad, the evolution of the public opinion in the last decade, and the interaction between the former and the latter. It emphasises the absolute priority of a professional communication and exchange to gain public acceptance. (orig.)

  7. Promoting the acceptance of nuclear technology

    International Nuclear Information System (INIS)

    Rueckl, E.

    1998-01-01

    Restoring the public acceptance of nuclear technology requires optimized public relations work and an enhanced interaction among the nuclear industry and schools and universities. Thinking in contexts needs to be promoted, also in order to improve knowledge of mass flows. Specific terms often mean different things to experts and to the public. This can be corrected by careful use of language and precision in public relations work. The young generation is more openminded towards technology now than it was in the seventies and eighties. This is a point of departure in winning young people also for nuclear technology. For this to happen, science education in schools needs to be improved and the appropriate courses need to be introduced. (orig.) [de

  8. Columbus safety and reliability

    Science.gov (United States)

    Longhurst, F.; Wessels, H.

    1988-10-01

    Analyses carried out to ensure Columbus reliability, availability, and maintainability, and operational and design safety are summarized. Failure modes/effects/criticality is the main qualitative tool used. The main aspects studied are fault tolerance, hazard consequence control, risk minimization, human error effects, restorability, and safe-life design.

  9. Reliability versus reproducibility

    International Nuclear Information System (INIS)

    Lautzenheiser, C.E.

    1976-01-01

    Defect detection and reproducibility of results are two separate but closely related subjects. It is axiomatic that a defect must be detected from examination to examination or reproducibility of results is very poor. On the other hand, a defect can be detected on each of subsequent examinations for higher reliability and still have poor reproducibility of results

  10. Designing reliability into accelerators

    International Nuclear Information System (INIS)

    Hutton, A.

    1992-08-01

    For the next generation of high performance, high average luminosity colliders, the ''factories,'' reliability engineering must be introduced right at the inception of the project and maintained as a central theme throughout the project. There are several aspects which will be addressed separately: Concept; design; motivation; management techniques; and fault diagnosis

  11. Proof tests on reliability

    International Nuclear Information System (INIS)

    Mishima, Yoshitsugu

    1983-01-01

    In order to obtain public understanding on nuclear power plants, tests should be carried out to prove the reliability and safety of present LWR plants. For example, the aseismicity of nuclear power plants must be verified by using a large scale earthquake simulator. Reliability test began in fiscal 1975, and the proof tests on steam generators and on PWR support and flexure pins against stress corrosion cracking have already been completed, and the results have been internationally highly appreciated. The capacity factor of the nuclear power plant operation in Japan rose to 80% in the summer of 1983, and considering the period of regular inspection, it means the operation of almost full capacity. Japanese LWR technology has now risen to the top place in the world after having overcome the defects. The significance of the reliability test is to secure the functioning till the age limit is reached, to confirm the correct forecast of deteriorating process, to confirm the effectiveness of the remedy to defects and to confirm the accuracy of predicting the behavior of facilities. The reliability of nuclear valves, fuel assemblies, the heat affected zones in welding, reactor cooling pumps and electric instruments has been tested or is being tested. (Kako, I.)

  12. Reliability and code level

    NARCIS (Netherlands)

    Kasperski, M.; Geurts, C.P.W.

    2005-01-01

    The paper describes the work of the IAWE Working Group WBG - Reliability and Code Level, one of the International Codification Working Groups set up at ICWE10 in Copenhagen. The following topics are covered: sources of uncertainties in the design wind load, appropriate design target values for the

  13. Reliability of Plastic Slabs

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    1989-01-01

    In the paper it is shown how upper and lower bounds for the reliability of plastic slabs can be determined. For the fundamental case it is shown that optimal bounds of a deterministic and a stochastic analysis are obtained on the basis of the same failure mechanisms and the same stress fields....

  14. Reliability based structural design

    NARCIS (Netherlands)

    Vrouwenvelder, A.C.W.M.

    2014-01-01

    According to ISO 2394, structures shall be designed, constructed and maintained in such a way that they are suited for their use during the design working life in an economic way. To fulfil this requirement one needs insight into the risk and reliability under expected and non-expected actions. A

  15. Travel time reliability modeling.

    Science.gov (United States)

    2011-07-01

    This report includes three papers as follows: : 1. Guo F., Rakha H., and Park S. (2010), "A Multi-state Travel Time Reliability Model," : Transportation Research Record: Journal of the Transportation Research Board, n 2188, : pp. 46-54. : 2. Park S.,...

  16. Reliability and Model Fit

    Science.gov (United States)

    Stanley, Leanne M.; Edwards, Michael C.

    2016-01-01

    The purpose of this article is to highlight the distinction between the reliability of test scores and the fit of psychometric measurement models, reminding readers why it is important to consider both when evaluating whether test scores are valid for a proposed interpretation and/or use. It is often the case that an investigator judges both the…

  17. Parametric Mass Reliability Study

    Science.gov (United States)

    Holt, James P.

    2014-01-01

    The International Space Station (ISS) systems are designed based upon having redundant systems with replaceable orbital replacement units (ORUs). These ORUs are designed to be swapped out fairly quickly, but some are very large, and some are made up of many components. When an ORU fails, it is replaced on orbit with a spare; the failed unit is sometimes returned to Earth to be serviced and re-launched. Such a system is not feasible for a 500+ day long-duration mission beyond low Earth orbit. The components that make up these ORUs have mixed reliabilities. Components that make up the most mass-such as computer housings, pump casings, and the silicon board of PCBs-typically are the most reliable. Meanwhile components that tend to fail the earliest-such as seals or gaskets-typically have a small mass. To better understand the problem, my project is to create a parametric model that relates both the mass of ORUs to reliability, as well as the mass of ORU subcomponents to reliability.

  18. Reliability Approach of a Compressor System using Reliability Block ...

    African Journals Online (AJOL)

    pc

    2018-03-05

    Mar 5, 2018 ... This paper presents a reliability analysis of such a system using reliability ... Keywords-compressor system, reliability, reliability block diagram, RBD .... the same structure has been kept with the three subsystems: air flow, oil flow and .... and Safety in Engineering Design", Springer, 2009. [3] P. O'Connor ...

  19. Reliability Analysis of Core Protection Calculator System by Combining Petri Net and Fault Tree

    International Nuclear Information System (INIS)

    Kim, Hyejin; Kim, Jonghyun

    2013-01-01

    This paper proposes an approach to analyzing the reliability of digital systems by combining Petri net (PN) and Fault tree. The Petri net allows modeling event dependencies and interaction, to represent the time sequence, and to model assumptions for dynamic events. The Petri net model can be straightforwardly transformed to fault tree using the gate. Then, the FT can be integrated into the existing PSA. This paper applies the approach to the reliability analysis of Core Protection Calculator System (CPCS). Digital technology is replacing the analog instrumentation and control (I and C) systems in both new and upgraded nuclear power plants. As digital systems are introduced to nuclear power plants, issues related with reliability analyses of these digital systems are being raised. One of these issues is that static fault tree (FT) and event tree (ET) approach cannot properly account for dynamic interactions in the digital systems, such as multiple top events, logic loops and time delay. Many methods have been proposed to solve the problems, but there is no single method that is universally accepted for the application to the current generation probabilistic safety analysis (PSA)

  20. Reliability Analysis of Core Protection Calculator System by Combining Petri Net and Fault Tree

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyejin; Kim, Jonghyun [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

    2013-10-15

    This paper proposes an approach to analyzing the reliability of digital systems by combining Petri net (PN) and Fault tree. The Petri net allows modeling event dependencies and interaction, to represent the time sequence, and to model assumptions for dynamic events. The Petri net model can be straightforwardly transformed to fault tree using the gate. Then, the FT can be integrated into the existing PSA. This paper applies the approach to the reliability analysis of Core Protection Calculator System (CPCS). Digital technology is replacing the analog instrumentation and control (I and C) systems in both new and upgraded nuclear power plants. As digital systems are introduced to nuclear power plants, issues related with reliability analyses of these digital systems are being raised. One of these issues is that static fault tree (FT) and event tree (ET) approach cannot properly account for dynamic interactions in the digital systems, such as multiple top events, logic loops and time delay. Many methods have been proposed to solve the problems, but there is no single method that is universally accepted for the application to the current generation probabilistic safety analysis (PSA)

  1. Developing Ultra Reliable Life Support for the Moon and Mars

    Science.gov (United States)

    Jones, Harry W.

    2009-01-01

    Recycling life support systems can achieve ultra reliability by using spares to replace failed components. The added mass for spares is approximately equal to the original system mass, provided the original system reliability is not very low. Acceptable reliability can be achieved for the space shuttle and space station by preventive maintenance and by replacing failed units, However, this maintenance and repair depends on a logistics supply chain that provides the needed spares. The Mars mission must take all the needed spares at launch. The Mars mission also must achieve ultra reliability, a very low failure rate per hour, since it requires years rather than weeks and cannot be cut short if a failure occurs. Also, the Mars mission has a much higher mass launch cost per kilogram than shuttle or station. Achieving ultra reliable space life support with acceptable mass will require a well-planned and extensive development effort. Analysis must define the reliability requirement and allocate it to subsystems and components. Technologies, components, and materials must be designed and selected for high reliability. Extensive testing is needed to ascertain very low failure rates. Systems design should segregate the failure causes in the smallest, most easily replaceable parts. The systems must be designed, produced, integrated, and tested without impairing system reliability. Maintenance and failed unit replacement should not introduce any additional probability of failure. The overall system must be tested sufficiently to identify any design errors. A program to develop ultra reliable space life support systems with acceptable mass must start soon if it is to produce timely results for the moon and Mars.

  2. How reliable are Functional Movement Screening scores? A systematic review of rater reliability.

    Science.gov (United States)

    Moran, Robert W; Schneiders, Anthony G; Major, Katherine M; Sullivan, S John

    2016-05-01

    Several physical assessment protocols to identify intrinsic risk factors for injury aetiology related to movement quality have been described. The Functional Movement Screen (FMS) is a standardised, field-expedient test battery intended to assess movement quality and has been used clinically in preparticipation screening and in sports injury research. To critically appraise and summarise research investigating the reliability of scores obtained using the FMS battery. Systematic literature review. Systematic search of Google Scholar, Scopus (including ScienceDirect and PubMed), EBSCO (including Academic Search Complete, AMED, CINAHL, Health Source: Nursing/Academic Edition), MEDLINE and SPORTDiscus. Studies meeting eligibility criteria were assessed by 2 reviewers for risk of bias using the Quality Appraisal of Reliability Studies checklist. Overall quality of evidence was determined using van Tulder's levels of evidence approach. 12 studies were appraised. Overall, there was a 'moderate' level of evidence in favour of 'acceptable' (intraclass correlation coefficient ≥0.6) inter-rater and intra-rater reliability for composite scores derived from live scoring. For inter-rater reliability of composite scores derived from video recordings there was 'conflicting' evidence, and 'limited' evidence for intra-rater reliability. For inter-rater reliability based on live scoring of individual subtests there was 'moderate' evidence of 'acceptable' reliability (κ≥0.4) for 4 subtests (Deep Squat, Shoulder Mobility, Active Straight-leg Raise, Trunk Stability Push-up) and 'conflicting' evidence for the remaining 3 (Hurdle Step, In-line Lunge, Rotary Stability). This review found 'moderate' evidence that raters can achieve acceptable levels of inter-rater and intra-rater reliability of composite FMS scores when using live ratings. Overall, there were few high-quality studies, and the quality of several studies was impacted by poor study reporting particularly in relation to

  3. Reliability in the utility computing era: Towards reliable Fog computing

    DEFF Research Database (Denmark)

    Madsen, Henrik; Burtschy, Bernard; Albeanu, G.

    2013-01-01

    This paper considers current paradigms in computing and outlines the most important aspects concerning their reliability. The Fog computing paradigm as a non-trivial extension of the Cloud is considered and the reliability of the networks of smart devices are discussed. Combining the reliability...... requirements of grid and cloud paradigms with the reliability requirements of networks of sensor and actuators it follows that designing a reliable Fog computing platform is feasible....

  4. RTE - Reliability report 2016

    International Nuclear Information System (INIS)

    2017-06-01

    Every year, RTE produces a reliability report for the past year. This document lays out the main factors that affected the electrical power system's operational reliability in 2016 and the initiatives currently under way intended to ensure its reliability in the future. Within a context of the energy transition, changes to the European interconnected network mean that RTE has to adapt on an on-going basis. These changes include the increase in the share of renewables injecting an intermittent power supply into networks, resulting in a need for flexibility, and a diversification in the numbers of stakeholders operating in the energy sector and changes in the ways in which they behave. These changes are dramatically changing the structure of the power system of tomorrow and the way in which it will operate - particularly the way in which voltage and frequency are controlled, as well as the distribution of flows, the power system's stability, the level of reserves needed to ensure supply-demand balance, network studies, assets' operating and control rules, the tools used and the expertise of operators. The results obtained in 2016 are evidence of a globally satisfactory level of reliability for RTE's operations in somewhat demanding circumstances: more complex supply-demand balance management, cross-border schedules at interconnections indicating operation that is closer to its limits and - most noteworthy - having to manage a cold spell just as several nuclear power plants had been shut down. In a drive to keep pace with the changes expected to occur in these circumstances, RTE implemented numerous initiatives to ensure high levels of reliability: - maintaining investment levels of euro 1.5 billion per year; - increasing cross-zonal capacity at borders with our neighbouring countries, thus bolstering the security of our electricity supply; - implementing new mechanisms (demand response, capacity mechanism, interruptibility, etc.); - involvement in tests or projects

  5. Thin and reliable connectivity for the CBM-MVD

    Energy Technology Data Exchange (ETDEWEB)

    Klaus, Philipp [Institut fuer Kernphysik, Goethe-Universitaet Frankfurt (Germany); Collaboration: CBM-MVD-Collaboration

    2016-07-01

    The CBM Micro Vertex Detector requires reliable connectivity to its ∝ 300 CMOS Monolithic Pixel Sensors (CPS). This includes stable powering but also reliable data transmission and fault tolerance. Another requirement is to keep the material budget to a minimum as the cables will be partially in the acceptance of the micro vertex detector. This contribution will summarize our current efforts to reduce the material budget of the readout cables while ensuring reliable connectivity. Our latest prototype of the second station of the MVD (named PRESTO) was studied to obtain the presented results.

  6. Food irradiation receives international acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Beddoes, J M [Atomic Energy of Canada Ltd., Ottawa, Ontario. Commercial Products

    1982-04-01

    Irradiation has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of /sup 60/Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient.

  7. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1998-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  8. Consumer acceptance of irradiated food

    Energy Technology Data Exchange (ETDEWEB)

    Loaharanu, P. [Head, Food Preservation Section, Joint FAO/ IAEA Division of Nuclear Techniques in Food and Agriculture, Wagramerstr. 5, A-1400, Vienna (Austria)

    1997-12-31

    There was a widely held opinion during the 1970`s and 1980`s that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  9. Food irradiation receives international acceptance

    International Nuclear Information System (INIS)

    Beddoes, J.M.

    1982-01-01

    Irradition has advantages as a method of preserving food, especially in the Third World. The author tabulates some examples of actual use of food irradiation with dates and tonnages, and tells the story of the gradual acceptance of food irradiation by the World Health Organization, other international bodies, and the U.S. Food and Drug Administration (USFDA). At present, the joint IAEA/FAO/WHO standard permits an energy level of up to 5 MeV for gamma rays, well above the 1.3 MeV energy level of 60 Co. The USFDA permits irradiation of any food up to 10 krad, and minor constituents of a diet may be irradiated up to 5 Mrad. The final hurdle to be cleared, that of economic acceptance, depends on convincing the food processing industry that the process is technically and economically efficient

  10. Consumer acceptance of irradiated food

    International Nuclear Information System (INIS)

    Loaharanu, P.

    1997-01-01

    There was a widely held opinion during the 1970's and 1980's that consumers would be reluctant to purchase irradiated food, as it was perceived that consumers would confuse irradiated food with food contaminated by radionuclides. Indeed, a number of consumer attitude surveys conducted in several western countries during these two decades demonstrated that the concerns of consumers on irradiated food varied from very concerned to seriously concerned.This paper attempts to review parameters conducting in measuring consumer acceptance of irradiated food during the past three decades and to project the trends on this subject. It is believed that important lessons learned from past studies will guide further efforts to market irradiated food with wide consumer acceptance in the future. (Author)

  11. Risk acceptance by the population

    International Nuclear Information System (INIS)

    Diekershoff, K.

    1980-01-01

    Information which is given by systematical learning processes creates a necessary prerequisite for a partly realistic evaluation of risks. If the objective shall be achieved to reduce continuously the acceptance of risks it is absolutely necessary to include the persons concerned in the process of communication and formation. In this field social science could make a specific contribution by its approach in action research. (orig./RW) [de

  12. Public acceptance and public relations

    International Nuclear Information System (INIS)

    Tanaka, Yasumasa

    1977-01-01

    A set of problems are discussed, which must be studied before the public relations are dealt with. Firstly, the trade-off between energy and health must be considered. There were several ages in which the consideration on health took preference to the energy requirement in the past. For example, the use of coal in London was prohibited by the King's proclamation in 1,306. Secondly, the selection for the acceptance of atomic power development and utilization is based on the subjective susceptibility psychologically, and cannot be concluded only by the logical reasoning. Thirdly, the strict definition of ''national consensus'' is necessary. That is, whether does it mean pleviscite or mere mood. Fourthly, whether the atomic energy is free from the danger or death biologically or not. Fifthly, is there any method for discriminating the persons who accept atomic power from the persons who do not socially. Although the probability of death caused by atomic accidents is very small (one three hundred millionth a year), many peoples hate atomic power and oppose to the construction of nuclear power plants. Four reasons for this are considered: (1) social diffusion of innovation, (2) nuclear allergy, (3) shortage of the conception of risk-benefit, and (4) heterogeneity of the public. According to the investigation of the relationship between electric power and livelihood, carried out by the policy and science research institute in Tokyo, the highly subjective decision for the acceptance of atomic power is independent of the objective knowledge on atomic power. (Iwakiri, K.)

  13. Self-efficacy and academic procrastination of university students in Metropolitan Lima

    Directory of Open Access Journals (Sweden)

    Alberto A. Alegre

    2013-12-01

    Full Text Available The aim of this investigation is establish the relation between self-efficacy and academic procrastination of university students in Lima City metropolitan area. The sample was obtained by intentional procedure. Assessments were made on 348 university students: 50.6% male and 49% female students; 70.1% from private and 29.9% from state universities. Self-Efficacy Scale and Academic Procrastination Scale were used for assessment and it was found they had both psychometric reliability according to internal consistency method and construct validity according to exploratory factorial analysis. The formulated hypothesis is accepted as the correlation coefficient obtained between both variables was negative (-235 and significant (p˂.000 but low.

  14. Accelerator reliability workshop

    Energy Technology Data Exchange (ETDEWEB)

    Hardy, L; Duru, Ph; Koch, J M; Revol, J L; Van Vaerenbergh, P; Volpe, A M; Clugnet, K; Dely, A; Goodhew, D

    2002-07-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop.

  15. Human Reliability Program Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Landers, John; Rogers, Erin; Gerke, Gretchen

    2014-05-18

    A Human Reliability Program (HRP) is designed to protect national security as well as worker and public safety by continuously evaluating the reliability of those who have access to sensitive materials, facilities, and programs. Some elements of a site HRP include systematic (1) supervisory reviews, (2) medical and psychological assessments, (3) management evaluations, (4) personnel security reviews, and (4) training of HRP staff and critical positions. Over the years of implementing an HRP, the Department of Energy (DOE) has faced various challenges and overcome obstacles. During this 4-day activity, participants will examine programs that mitigate threats to nuclear security and the insider threat to include HRP, Nuclear Security Culture (NSC) Enhancement, and Employee Assistance Programs. The focus will be to develop an understanding of the need for a systematic HRP and to discuss challenges and best practices associated with mitigating the insider threat.

  16. Reliability and construction control

    Directory of Open Access Journals (Sweden)

    Sherif S. AbdelSalam

    2016-06-01

    Full Text Available The goal of this study was to determine the most reliable and efficient combination of design and construction methods required for vibro piles. For a wide range of static and dynamic formulas, the reliability-based resistance factors were calculated using EGYPT database, which houses load test results for 318 piles. The analysis was extended to introduce a construction control factor that determines the variation between the pile nominal capacities calculated using static versus dynamic formulae. From the major outcomes, the lowest coefficient of variation is associated with Davisson’s criterion, and the resistance factors calculated for the AASHTO method are relatively high compared with other methods. Additionally, the CPT-Nottingham and Schmertmann method provided the most economic design. Recommendations related to a pile construction control factor were also presented, and it was found that utilizing the factor can significantly reduce variations between calculated and actual capacities.

  17. Scyllac equipment reliability analysis

    International Nuclear Information System (INIS)

    Gutscher, W.D.; Johnson, K.J.

    1975-01-01

    Most of the failures in Scyllac can be related to crowbar trigger cable faults. A new cable has been designed, procured, and is currently undergoing evaluation. When the new cable has been proven, it will be worked into the system as quickly as possible without causing too much additional down time. The cable-tip problem may not be easy or even desirable to solve. A tightly fastened permanent connection that maximizes contact area would be more reliable than the plug-in type of connection in use now, but it would make system changes and repairs much more difficult. The balance of the failures have such a low occurrence rate that they do not cause much down time and no major effort is underway to eliminate them. Even though Scyllac was built as an experimental system and has many thousands of components, its reliability is very good. Because of this the experiment has been able to progress at a reasonable pace

  18. Improving Power Converter Reliability

    DEFF Research Database (Denmark)

    Ghimire, Pramod; de Vega, Angel Ruiz; Beczkowski, Szymon

    2014-01-01

    of a high-power IGBT module during converter operation, which may play a vital role in improving the reliability of the power converters. The measured voltage is used to estimate the module average junction temperature of the high and low-voltage side of a half-bridge IGBT separately in every fundamental......The real-time junction temperature monitoring of a high-power insulated-gate bipolar transistor (IGBT) module is important to increase the overall reliability of power converters for industrial applications. This article proposes a new method to measure the on-state collector?emitter voltage...... is measured in a wind power converter at a low fundamental frequency. To illustrate more, the test method as well as the performance of the measurement circuit are also presented. This measurement is also useful to indicate failure mechanisms such as bond wire lift-off and solder layer degradation...

  19. Accelerator reliability workshop

    International Nuclear Information System (INIS)

    Hardy, L.; Duru, Ph.; Koch, J.M.; Revol, J.L.; Van Vaerenbergh, P.; Volpe, A.M.; Clugnet, K.; Dely, A.; Goodhew, D.

    2002-01-01

    About 80 experts attended this workshop, which brought together all accelerator communities: accelerator driven systems, X-ray sources, medical and industrial accelerators, spallation sources projects (American and European), nuclear physics, etc. With newly proposed accelerator applications such as nuclear waste transmutation, replacement of nuclear power plants and others. Reliability has now become a number one priority for accelerator designers. Every part of an accelerator facility from cryogenic systems to data storage via RF systems are concerned by reliability. This aspect is now taken into account in the design/budget phase, especially for projects whose goal is to reach no more than 10 interruptions per year. This document gathers the slides but not the proceedings of the workshop

  20. Safety and reliability assessment

    International Nuclear Information System (INIS)

    1979-01-01

    This report contains the papers delivered at the course on safety and reliability assessment held at the CSIR Conference Centre, Scientia, Pretoria. The following topics were discussed: safety standards; licensing; biological effects of radiation; what is a PWR; safety principles in the design of a nuclear reactor; radio-release analysis; quality assurance; the staffing, organisation and training for a nuclear power plant project; event trees, fault trees and probability; Automatic Protective Systems; sources of failure-rate data; interpretation of failure data; synthesis and reliability; quantification of human error in man-machine systems; dispersion of noxious substances through the atmosphere; criticality aspects of enrichment and recovery plants; and risk and hazard analysis. Extensive examples are given as well as case studies

  1. Reliability of Circumplex Axes

    Directory of Open Access Journals (Sweden)

    Micha Strack

    2013-06-01

    Full Text Available We present a confirmatory factor analysis (CFA procedure for computing the reliability of circumplex axes. The tau-equivalent CFA variance decomposition model estimates five variance components: general factor, axes, scale-specificity, block-specificity, and item-specificity. Only the axes variance component is used for reliability estimation. We apply the model to six circumplex types and 13 instruments assessing interpersonal and motivational constructs—Interpersonal Adjective List (IAL, Interpersonal Adjective Scales (revised; IAS-R, Inventory of Interpersonal Problems (IIP, Impact Messages Inventory (IMI, Circumplex Scales of Interpersonal Values (CSIV, Support Action Scale Circumplex (SAS-C, Interaction Problems With Animals (IPI-A, Team Role Circle (TRC, Competing Values Leadership Instrument (CV-LI, Love Styles, Organizational Culture Assessment Instrument (OCAI, Customer Orientation Circle (COC, and System for Multi-Level Observation of Groups (behavioral adjectives; SYMLOG—in 17 German-speaking samples (29 subsamples, grouped by self-report, other report, and metaperception assessments. The general factor accounted for a proportion ranging from 1% to 48% of the item variance, the axes component for 2% to 30%; and scale specificity for 1% to 28%, respectively. Reliability estimates varied considerably from .13 to .92. An application of the Nunnally and Bernstein formula proposed by Markey, Markey, and Tinsley overestimated axes reliabilities in cases of large-scale specificities but otherwise works effectively. Contemporary circumplex evaluations such as Tracey’s RANDALL are sensitive to the ratio of the axes and scale-specificity components. In contrast, the proposed model isolates both components.

  2. The cost of reliability

    International Nuclear Information System (INIS)

    Ilic, M.

    1998-01-01

    In this article the restructuring process under way in the US power industry is being revisited from the point of view of transmission system provision and reliability was rolled into the average cost of electricity to all, it is not so obvious how is this cost managed in the new industry. A new MIT approach to transmission pricing is here suggested as a possible solution [it

  3. Software reliability studies

    Science.gov (United States)

    Hoppa, Mary Ann; Wilson, Larry W.

    1994-01-01

    There are many software reliability models which try to predict future performance of software based on data generated by the debugging process. Our research has shown that by improving the quality of the data one can greatly improve the predictions. We are working on methodologies which control some of the randomness inherent in the standard data generation processes in order to improve the accuracy of predictions. Our contribution is twofold in that we describe an experimental methodology using a data structure called the debugging graph and apply this methodology to assess the robustness of existing models. The debugging graph is used to analyze the effects of various fault recovery orders on the predictive accuracy of several well-known software reliability algorithms. We found that, along a particular debugging path in the graph, the predictive performance of different models can vary greatly. Similarly, just because a model 'fits' a given path's data well does not guarantee that the model would perform well on a different path. Further we observed bug interactions and noted their potential effects on the predictive process. We saw that not only do different faults fail at different rates, but that those rates can be affected by the particular debugging stage at which the rates are evaluated. Based on our experiment, we conjecture that the accuracy of a reliability prediction is affected by the fault recovery order as well as by fault interaction.

  4. Are medical students accepted by patients in teaching hospitals?

    Directory of Open Access Journals (Sweden)

    Yousef Marwan

    2012-04-01

    Full Text Available Background: Worldwide, patients are the cornerstone of bedside teaching of medical students. In this study, the authors aimed to assess patients’ acceptability toward medical students in teaching hospitals of the Faculty of Medicine of Kuwait University. Methods: Ninehundred and ninety five patients were approached in 14 teaching hospitals; 932 patients agreed to participate (refusal rate is 6.3%. A self-administered questionnaire was used to collect data. Results: In general, higher acceptance of students by patients was found when there is no direct contact between the patient and the student (e.g., reading patients’ files, presenting in outpatient clinic, observing doctors performing examination or procedures compared to other situations (e.g., performing physical examination or procedures. Pediatrics patients showed higher acceptance of students compared to patients in other specialties, while Obstetrics/Gynecology patients showed the highest refusal of students. Gender of patients (especially females and students appeared to affect the degree of acceptance of medical students by patients. Majority of the patients (436; 46.8% believed that the presence of medical students in hospitals improves the quality of health care. Conclusion: Patients are an important factor of bedside teaching. Clinical tutors must take advantage of patients who accept medical students. Clinical tutors and medical students should master essential communication skills to convince patients in accepting students, thus improving bedside teaching. Also, using simulation and standardization should be considered to address scenarios that most patients are unwilling to allow students to participate.

  5. Sensory Acceptability of Squash (Cucurbita Maximain Making Ice Cream

    Directory of Open Access Journals (Sweden)

    Raymund B. Moreno

    2015-02-01

    Full Text Available - This experimental research was conducted to determine the sensory acceptability of mashed squash (Cucurbita Maxima of different proportions in making ice cream in terms of appearance, aroma, texture, taste and general acceptability. Five treatments were formulated in the study—four of which utilized mashed squash at various proportions and one treatment was used as the control variable which contains no mashed squash at all. The respondents of the study were the 20 Food Technology students and 10 faculty members of West Visayas State University Calinog Campus who were selected through random sampling. The respondents evaluated the finished products using a modified sensory evaluation score sheet based on Six Point Hedonic Scale. The statistical tools used were the means, standard deviation, Wilcoxon Signed Rank Test. The 0.01 alpha level was used as the criterion for acceptance or rejection of the null hypothesis. The result of the study led to the conclusion that there is a significant difference that existed in the level of acceptability of mashed squash in making ice cream in terms of appearance, aroma, and general acceptability, therefore the null hypothesis is rejected. However, no significant difference in the level of acceptability of using mashed squash in making ice cream in terms of taste and texture.

  6. The reliability of WorkWell Systems Functional Capacity Evaluation: a systematic review

    Science.gov (United States)

    2014-01-01

    Background Functional capacity evaluation (FCE) determines a person’s ability to perform work-related tasks and is a major component of the rehabilitation process. The WorkWell Systems (WWS) FCE (formerly known as Isernhagen Work Systems FCE) is currently the most commonly used FCE tool in German rehabilitation centres. Our systematic review investigated the inter-rater, intra-rater and test-retest reliability of the WWS FCE. Methods We performed a systematic literature search of studies on the reliability of the WWS FCE and extracted item-specific measures of inter-rater, intra-rater and test-retest reliability from the identified studies. Intraclass correlation coefficients ≥ 0.75, percentages of agreement ≥ 80%, and kappa coefficients ≥ 0.60 were categorised as acceptable, otherwise they were considered non-acceptable. The extracted values were summarised for the five performance categories of the WWS FCE, and the results were classified as either consistent or inconsistent. Results From 11 identified studies, 150 item-specific reliability measures were extracted. 89% of the extracted inter-rater reliability measures, all of the intra-rater reliability measures and 96% of the test-retest reliability measures of the weight handling and strength tests had an acceptable level of reliability, compared to only 67% of the test-retest reliability measures of the posture/mobility tests and 56% of the test-retest reliability measures of the locomotion tests. Both of the extracted test-retest reliability measures of the balance test were acceptable. Conclusions Weight handling and strength tests were found to have consistently acceptable reliability. Further research is needed to explore the reliability of the other tests as inconsistent findings or a lack of data prevented definitive conclusions. PMID:24674029

  7. Investment in new product reliability

    International Nuclear Information System (INIS)

    Murthy, D.N.P.; Rausand, M.; Virtanen, S.

    2009-01-01

    Product reliability is of great importance to both manufacturers and customers. Building reliability into a new product is costly, but the consequences of inadequate product reliability can be costlier. This implies that manufacturers need to decide on the optimal investment in new product reliability by achieving a suitable trade-off between the two costs. This paper develops a framework and proposes an approach to help manufacturers decide on the investment in new product reliability.

  8. Determinants of debit cards acceptance: An empirical investigation

    International Nuclear Information System (INIS)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar; Bakri, Mohamed Hariri; Zulkepli, Jafri

    2014-01-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry

  9. Determinants of debit cards acceptance: An empirical investigation

    Energy Technology Data Exchange (ETDEWEB)

    Ismail, Shafinar; Adnan, Azimah; Azizi, Amsyar [Faculty of Business and Management, Universiti Teknologi MARA, Melaka 75300 (Malaysia); Bakri, Mohamed Hariri [Faculty of Technology Management And Technopreneurship, Universiti Teknikal Malaysia, Melaka 76100 (Malaysia); Zulkepli, Jafri [Faculty of Quantitative Science, Universiti Utara Malaysia, Sintok Kedah (Malaysia)

    2014-12-04

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  10. Determinants of debit cards acceptance: An empirical investigation

    Science.gov (United States)

    Ismail, Shafinar; Bakri, Mohamed Hariri; Zulkepli, Jafri; Adnan, Azimah; Azizi, Amsyar

    2014-12-01

    These days, most of the Malaysians realize that the consumption of debit card will help them to reduce the household debt. Thus, it is important to analyse the acceptance of debit cards for further enhancement and expanding its market share in Malaysia. In addition, there is lacked of research being conducted on the determinants affecting the acceptance of debit cards among Malaysians. Thus, the study aimed to investigate the factors affecting the acceptance of debit cards. This study focuses on payment methods, consumer attitude, and safety of debit card in acceptance of debit cards. Questionnaires were distributed to the 300 respondents. The sampling procedure adopted was stratified random sampling. The data obtained were analysed using SPSS 20.0 which involves scale reliability, descriptive and regression analysis. The result indicates that payment methods, consumer attitude and safety are the determinants of debit cards acceptance. Safety is the best predictor as most of the customers are confidents to use debit cards because of the security being developed around these debit card transactions. The analyses presented in this study can be used by policymakers and managers as a guide to promote banking products and services. The findings achieved in this study will be of interest for practitioners and academics concerned with developments of the Malaysian banking industry.

  11. Wind power: basic challenge concerning social acceptance

    NARCIS (Netherlands)

    Wolsink, M.; Meyers, R.A.

    2012-01-01

    This reference article gives an overview of social acceptance (acceptance by all relevant actors in society) of all relevant aspects of implementation and diffusion of wind power. In social acceptance three dimensions of acceptance are distinguished (socio-political -; community -; market

  12. 75 FR 81152 - Interpretation of Protection System Reliability Standard

    Science.gov (United States)

    2010-12-27

    ..., generation and transmission (G&T) cooperative or similar organization to accept compliance responsibility on... Reliability Standards, Order No. 672, FERC Stats. & Regs. ] 31,204, order on reh'g, Order No. 672-A, FERC... reh'g & compliance, 117 FERC ] 61,126 (2006), aff'd sub nom. Alcoa, Inc. v. FERC, 564 F.3d 1342 (DC...

  13. Speaker Reliability Guides Children's Inductive Inferences about Novel Properties

    Science.gov (United States)

    Kim, Sunae; Kalish, Charles W.; Harris, Paul L.

    2012-01-01

    Prior work shows that children can make inductive inferences about objects based on their labels rather than their appearance (Gelman, 2003). A separate line of research shows that children's trust in a speaker's label is selective. Children accept labels from a reliable speaker over an unreliable speaker (e.g., Koenig & Harris, 2005). In the…

  14. E-learning acceptance based on technology acceptance model (TAM)

    African Journals Online (AJOL)

    Data were collected with 95 undergraduate students at Tunku Abdul Rahman University College (TARUC), Johor. Structural Equation Modeling (SEM) was used to analyze the data. Results shown that computer self-efficacyhas significantly effects ease of use, while perceived ease of use significantly affectsintention to use ...

  15. On the reliability of seasonal climate forecasts

    Science.gov (United States)

    Weisheimer, A.; Palmer, T. N.

    2014-01-01

    Seasonal climate forecasts are being used increasingly across a range of application sectors. A recent UK governmental report asked: how good are seasonal forecasts on a scale of 1–5 (where 5 is very good), and how good can we expect them to be in 30 years time? Seasonal forecasts are made from ensembles of integrations of numerical models of climate. We argue that ‘goodness’ should be assessed first and foremost in terms of the probabilistic reliability of these ensemble-based forecasts; reliable inputs are essential for any forecast-based decision-making. We propose that a ‘5’ should be reserved for systems that are not only reliable overall, but where, in particular, small ensemble spread is a reliable indicator of low ensemble forecast error. We study the reliability of regional temperature and precipitation forecasts of the current operational seasonal forecast system of the European Centre for Medium-Range Weather Forecasts, universally regarded as one of the world-leading operational institutes producing seasonal climate forecasts. A wide range of ‘goodness’ rankings, depending on region and variable (with summer forecasts of rainfall over Northern Europe performing exceptionally poorly) is found. Finally, we discuss the prospects of reaching ‘5’ across all regions and variables in 30 years time. PMID:24789559

  16. University Internationalization and University Autonomy

    DEFF Research Database (Denmark)

    Turcan, Romeo V.; Gulieva, Valeria

    2016-01-01

    Turcan and Gulieva deepen our theoretical understanding of the process of university internationalisation by exploring the relationship between university internationalisation and university autonomy. They conjecture that the process of university internationalisation and its sustainability are d......, dissimilar, and sometimes conflicting dimensions of the financial, legal, organisational, staffing, and academic autonomy of the host country, are compromising key aspects of their own autonomy and core mission?......Turcan and Gulieva deepen our theoretical understanding of the process of university internationalisation by exploring the relationship between university internationalisation and university autonomy. They conjecture that the process of university internationalisation and its sustainability...... are determined by the structure and exercise of university autonomy settings at home and in the host countries, and that the process itself cannot be successfully achieved and maintained without changes in the autonomy settings. The key question the authors ask is to what degree universities, in embracing new...

  17. Information Technologies Pre-Service Teachers' Acceptance of Tablet PCs as an Innovative Learning Tool

    Science.gov (United States)

    Cuhadar, Cem

    2014-01-01

    The current study is aimed to determine if Turkish IT pre-service teachers' acceptance of tablet PCs is within the framework of the Technology Acceptance Model. The research was patterned as a phenomenological study which is among the qualitative research methods. Participants were eight pre-service teachers studying in Trakya University, Faculty…

  18. Conceptual Ecology of the Evolution Acceptance among Greek Education Students: Knowledge, Religious Practices and Social Influences

    Science.gov (United States)

    Athanasiou, Kyriacos; Papadopoulou, Penelope

    2012-01-01

    In this study, we explored some of the factors related to the acceptance of evolution theory among Greek university students training to be teachers in early childhood education, using conceptual ecology for biological evolution as a theoretical framework. We examined the acceptance of evolution theory and we also looked into the relationship…

  19. Validity and Reliability of Korean Version of Health Empowerment Scale (K-HES for Older Adults

    Directory of Open Access Journals (Sweden)

    Chorong Park, MSN, RN

    2013-09-01

    Conclusion: The K-HES had acceptable validity and reliability. The brevity and ease of administration of the K-HES makes it a suitable tool for evaluating empowerment-based education programs targeted towards older populations.

  20. ECLSS Reliability for Long Duration Missions Beyond Lower Earth Orbit

    Science.gov (United States)

    Sargusingh, Miriam J.; Nelson, Jason

    2014-01-01

    Reliability has been highlighted by NASA as critical to future human space exploration particularly in the area of environmental controls and life support systems. The Advanced Exploration Systems (AES) projects have been encouraged to pursue higher reliability components and systems as part of technology development plans. However, there is no consensus on what is meant by improving on reliability; nor on how to assess reliability within the AES projects. This became apparent when trying to assess reliability as one of several figures of merit for a regenerable water architecture trade study. In the Spring of 2013, the AES Water Recovery Project (WRP) hosted a series of events at the NASA Johnson Space Center (JSC) with the intended goal of establishing a common language and understanding of our reliability goals and equipping the projects with acceptable means of assessing our respective systems. This campaign included an educational series in which experts from across the agency and academia provided information on terminology, tools and techniques associated with evaluating and designing for system reliability. The campaign culminated in a workshop at JSC with members of the ECLSS and AES communities with the goal of developing a consensus on what reliability means to AES and identifying methods for assessing our low to mid-technology readiness level (TRL) technologies for reliability. This paper details the results of the workshop.

  1. Fast Acceptance by Common Experience

    Directory of Open Access Journals (Sweden)

    Nathan Berg

    2010-08-01

    Full Text Available Schelling (1969, 1971a,b, 1978 observed that macro-level patterns do not necessarily reflect micro-level intentions, desires or goals. In his classic model on neighborhood segregation which initiated a large and influential literature, individuals with no desire to be segregated from those who belong to other social groups nevertheless wind up clustering with their own type. Most extensions of Schelling's model have replicated this result. There is an important mismatch, however, between theory and observation, which has received relatively little attention. Whereas Schelling-inspired models typically predict large degrees of segregation starting from virtually any initial condition, the empirical literature documents considerable heterogeneity in measured levels of segregation. This paper introduces a mechanism that can produce significantly higher levels of integration and, therefore, brings predicted distributions of segregation more in line with real-world observation. As in the classic Schelling model, agents in a simulated world want to stay or move to a new location depending on the proportion of neighbors they judge to be acceptable. In contrast to the classic model, agents' classifications of their neighbors as acceptable or not depend lexicographically on recognition first and group type (e.g., ethnic stereotyping second. The FACE-recognition model nests classic Schelling: When agents have no recognition memory, judgments about the acceptability of a prospective neighbor rely solely on his or her group type (as in the Schelling model. A very small amount of recognition memory, however, eventually leads to different classifications that, in turn, produce dramatic macro-level effects resulting in significantly higher levels of integration. A novel implication of the FACE-recognition model concerns the large potential impact of policy interventions that generate modest numbers of face-to-face encounters with members of other social groups.

  2. Maynard Smith: amplifying the reasons for signal reliability.

    Science.gov (United States)

    Harper, D G C

    2006-03-21

    One of the many questions to which John Maynard Smith contributed was that of why most animal signals are reliable. He initially rejected the "handicap" argument but gradually accepted it, a process I briefly describe. This episode illustrated his preference for mathematical models over verbal ones, and the generosity with which he could change his mind. Even after accepting that some signals are reliable because of their strategic costs, he argued for a pluralistic approach to signal reliability. Signal complexity was a developing interest when he died. Signals usually involve several components, some of which appear to amplify other signal components. The terms "amplifier" and "index" require more thought to reduce the scope for semantic confusion. I conclude by describing Maynard Smith's fascination with peacocks Pavo cristatus.

  3. How acceptable has become tolerable

    International Nuclear Information System (INIS)

    Clarke, R.H.

    1989-01-01

    A brief article discusses the differing conclusions drawn by the Royal Society Study Group and the Health and Safety Executive on the acceptability of the level of annual risk of death to the individual due to radiation. Regarding occupational exposure, both groups arrived at the same figure of 1 in 1000 per year but the former group considered this to be 'hardly totally unacceptable' while the latter group considered this to be 'borderline of intolerable'. Regarding exposure of the members of the public, the levels of risk concluded from both groups were even more divergent. (U.K.)

  4. Axelrod model: accepting or discussing

    Science.gov (United States)

    Dybiec, Bartlomiej; Mitarai, Namiko; Sneppen, Kim

    2012-10-01

    Agents building social systems are characterized by complex states, and interactions among individuals can align their opinions. The Axelrod model describes how local interactions can result in emergence of cultural domains. We propose two variants of the Axelrod model where local consensus is reached either by listening and accepting one of neighbors' opinion or two agents discuss their opinion and achieve an agreement with mixed opinions. We show that the local agreement rule affects the character of the transition between the single culture and the multiculture regimes.

  5. Nuclear performance and reliability

    International Nuclear Information System (INIS)

    Rothwell, G.

    1993-01-01

    If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive. There has been a significant improvement in nuclear power plant performance, due largely to a decline in the forced outage rate and a dramatic drop in the average number of forced outages per fuel cycle. If fewer forced outages are a sign of improved safety, nuclear power plants have become safer and more productive over time. To encourage further increases in performance, regulatory incentive schemes should reward reactor operators for improved reliability and safety, as well as for improved performance

  6. [How Reliable is Neuronavigation?].

    Science.gov (United States)

    Stieglitz, Lennart Henning

    2016-02-17

    Neuronavigation plays a central role in modern neurosurgery. It allows visualizing instruments and three-dimensional image data intraoperatively and supports spatial orientation. Thus it allows to reduce surgical risks and speed up complex surgical procedures. The growing availability and importance of neuronavigation makes clear how relevant it is to know about its reliability and accuracy. Different factors may influence the accuracy during the surgery unnoticed, misleading the surgeon. Besides the best possible optimization of the systems themselves, a good knowledge about its weaknesses is mandatory for every neurosurgeon.

  7. The value of reliability

    DEFF Research Database (Denmark)

    Fosgerau, Mogens; Karlström, Anders

    2010-01-01

    We derive the value of reliability in the scheduling of an activity of random duration, such as travel under congested conditions. Using a simple formulation of scheduling utility, we show that the maximal expected utility is linear in the mean and standard deviation of trip duration, regardless...... of the form of the standardised distribution of trip durations. This insight provides a unification of the scheduling model and models that include the standard deviation of trip duration directly as an argument in the cost or utility function. The results generalise approximately to the case where the mean...

  8. Wikipedia ranking of world universities

    Science.gov (United States)

    Lages, José; Patt, Antoine; Shepelyansky, Dima L.

    2016-03-01

    We use the directed networks between articles of 24 Wikipedia language editions for producing the wikipedia ranking of world Universities (WRWU) using PageRank, 2DRank and CheiRank algorithms. This approach allows to incorporate various cultural views on world universities using the mathematical statistical analysis independent of cultural preferences. The Wikipedia ranking of top 100 universities provides about 60% overlap with the Shanghai university ranking demonstrating the reliable features of this approach. At the same time WRWU incorporates all knowledge accumulated at 24 Wikipedia editions giving stronger highlights for historically important universities leading to a different estimation of efficiency of world countries in university education. The historical development of university ranking is analyzed during ten centuries of their history.

  9. Rational optimization of reliability and safety policies

    International Nuclear Information System (INIS)

    Melchers, Robert E.

    2001-01-01

    Optimization of structures for design has a long history, including optimization using numerical methods and optimality criteria. Much of this work has considered a subset of the complete design optimization problem--that of the technical issues alone. The more general problem must consider also non-technical issues and, importantly, the interplay between them and the parameters which influence them. Optimization involves optimal setting of design or acceptance criteria and, separately, optimal design within the criteria. In the modern context of probability based design codes this requires probabilistic acceptance criteria. The determination of such criteria involves more than the nominal code failure probability approach used for design code formulation. A more general view must be taken and a clear distinction must be made between those matters covered by technical reliability and non-technical reliability. The present paper considers this issue and outlines a framework for rational optimization of structural and other systems given the socio-economic and political systems within which optimization must be performed

  10. Verification, validation, and reliability of predictions

    International Nuclear Information System (INIS)

    Pigford, T.H.; Chambre, P.L.

    1987-04-01

    The objective of predicting long-term performance should be to make reliable determinations of whether the prediction falls within the criteria for acceptable performance. Establishing reliable predictions of long-term performance of a waste repository requires emphasis on valid theories to predict performance. The validation process must establish the validity of the theory, the parameters used in applying the theory, the arithmetic of calculations, and the interpretation of results; but validation of such performance predictions is not possible unless there are clear criteria for acceptable performance. Validation programs should emphasize identification of the substantive issues of prediction that need to be resolved. Examples relevant to waste package performance are predicting the life of waste containers and the time distribution of container failures, establishing the criteria for defining container failure, validating theories for time-dependent waste dissolution that depend on details of the repository environment, and determining the extent of congruent dissolution of radionuclides in the UO 2 matrix of spent fuel. Prediction and validation should go hand in hand and should be done and reviewed frequently, as essential tools for the programs to design and develop repositories. 29 refs

  11. FUZZY ACCEPTANCE SAMPLING AND CHARACTERISTIC CURVES

    Directory of Open Access Journals (Sweden)

    Ebru Turano?lu

    2012-02-01

    Full Text Available Acceptance sampling is primarily used for the inspection of incoming or outgoing lots. Acceptance sampling refers to the application of specific sampling plans to a designated lot or sequence of lots. The parameters of acceptance sampling plans are sample sizes and acceptance numbers. In some cases, it may not be possible to define acceptance sampling parameters as crisp values. These parameters can be expressed by linguistic variables. The fuzzy set theory can be successfully used to cope with the vagueness in these linguistic expressions for acceptance sampling. In this paper, the main distributions of acceptance sampling plans are handled with fuzzy parameters and their acceptance probability functions are derived. Then the characteristic curves of acceptance sampling are examined under fuzziness. Illustrative examples are given.

  12. Public acceptance: A Japanese view

    International Nuclear Information System (INIS)

    1972-01-01

    A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade

  13. Public acceptance: A Japanese view

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1972-07-01

    A number of factors enter into a consideration of the public acceptance of nuclear power ? the public, nuclear power as an entity, and the interaction between the two. Interaction here implies the manner in which nuclear power is presented to the public ? what is the public need for nuclear power, and what public risk is entailed in having it? The problem of public acceptance, in this sense, is time-dependent. For the public is changeable, just as nuclear power is subject to technical progress and ' social' improvement. Japan is geographically a very small country with a very high density of population. Any industrial activity and any large-scale employment of modern technology is apt to have a much greater impact on the physical, social and biological environment of individual Japanese people than similar activities would have on those of other countries. Industrial pollutants such as sulphur dioxide from power plants, oxides of nitrogen from automobile engine exhausts, organic mercury from chemical industries and so on affect society to a high degree, considered in terms of their concentration either per capita or per square kilometre. In the case of nuclear power, therefore, people are more concerned with radiological effects than with thermal pollution.no matter how one looks at it, the experience of Hiroshima and Nagasaki has made the average member of the Japanese public, very sensitive to the problem of radiation safety. This is no longer a subject in which science or logic can persuade.

  14. Waste transmutation and public acceptance

    International Nuclear Information System (INIS)

    Pigford, T.H.

    1991-01-01

    The concept of transmuting radioactive wastes with reactors or accelerators is appealing. It has the potential of simplifying or eliminating problems of disposing of nuclear waste. The transmutation concept has been renewed vigorously at a time when national projects to dispose of high-level and transuranic waste are seriously delayed. In this period of tightening federal funds and program curtailments, skilled technical staffs are available at US Department of Energy (DOE) national laboratories and contractors to work on waste transmutation. If the claims of transmutation can be shown to be realistic, economically feasible, and capable of being implemented within the US institutional infrastructure, public acceptance of nuclear waste disposal may be enhanced. If the claims for transmutation are not substantiated, however, there will result a serious loss of credibility and an unjust exacerbation of public concerns about nuclear waste. The paper discusses the following topics: how public acceptance is achieved; the technical community and waste disposal; transmutation and technical communication; transmutation issues; technical fixes and public perception

  15. Wind energy and social acceptability

    International Nuclear Information System (INIS)

    Feurtey, E.

    2008-01-01

    This document was prepared as part of a decentralized collaboration between Quebec and France to share knowledge regarding strategies and best practices in wind power development. It reviewed the social acceptance of Quebec's wind power industry, particularly at the municipal level. The wind industry is growing rapidly in Quebec, and this growth has generated many reactions ranging from positive to negative. The purpose of this joint effort was to describe decision making steps to developing a wind turbine array. The history of wind development in Quebec was discussed along with the various hardware components required in a wind turbine and different types of installations. The key element in implementing wind turbine arrays is to establish public acceptance of the project, followed by a good regulatory framework to define the roles and responsibilities of participants. The production of electricity from wind turbines constitutes a clean and renewable source of energy. Although it is associated with a reduction in greenhouse gas emissions, this form of energy can also have negative environmental impacts, including noise. The revenues generated by wind parks are important factors in the decision making process. Two case studies in Quebec were presented. refs., tabs., figs.

  16. Policy formulation of public acceptance

    International Nuclear Information System (INIS)

    Kasai, Akihiro

    1978-01-01

    Since 1970, the new policy formulation for public acceptance of the new consideration on the location of electric power generation has been set and applied. The planning and the enforcement being conducted by local public organizations for the local economic build-up with plant location and also the adjustement of the requirements for fishery are two main specific characters in this new policy. The background of this new public acceptance policy, the history and the actual problems about the compensation for the location of power generation plants are reviewed. One new proposal, being recommended by the Policy and Science Laboratory to MITI in 1977 is explained. This is based on the method of promoting the location of power generation plants by public participation placing the redevelopment of regional societies as its basis. The problems concerning the industrial structures in farm villages, fishing villages and the areas of commerce and industry should be systematized, and explained from the viewpoint of outside impact, the characteristics of local areas and the location problems in this new proposal. Finally, the location process and its effectiveness should be put in order. (Nakai, Y.)

  17. Interactive reliability assessment using an integrated reliability data bank

    International Nuclear Information System (INIS)

    Allan, R.N.; Whitehead, A.M.

    1986-01-01

    The logical structure, techniques and practical application of a computer-aided technique based on a microcomputer using floppy disc Random Access Files is described. This interactive computational technique is efficient if the reliability prediction program is coupled directly to a relevant source of data to create an integrated reliability assessment/reliability data bank system. (DG)

  18. University contracts summary book

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-08-01

    The principal objectives of the Fossil Energy Program are to seek new ideas, new data, fundamental knowledge that will support the ongoing programs, and new processes to better utilize the nation's fossil energy resources with greater efficiency and environmental acceptability. Toward this end, the Department of Energy supports research projects conducted by universities and colleges to: Ensure a foundation for innovative technology through the use of the capabilities and talents in our academic institutions; provide an effective, two-way channel of communication between the Department of Energy and the academic community; and ensure that trained technical manpower is developed to carry out basic and applied research in support of DOE's mission. Fossil Energy's university activities emphasize the type of research that universities can do best - research to explore the potential of novel process concepts, develop innovative methods and materials for improving existing processes, and obtain fundamental information on the structure of coal and mechanisms of reactions of coal, shale oil, and other fossil energy sources. University programs are managed by different Fossil Energy technical groups; the individual projects are described in greater detail in this book. It is clear that a number of research areas related to the DOE Fossil Energy Program have been appropriate for university involvement, and that, with support from DOE, university scientific and technical expertise can be expected to continue to play a significant role in the advancement of fossil energy technology in the years to come.

  19. Microprocessor hardware reliability

    Energy Technology Data Exchange (ETDEWEB)

    Wright, R I

    1982-01-01

    Microprocessor-based technology has had an impact in nearly every area of industrial electronics and many applications have important safety implications. Microprocessors are being used for the monitoring and control of hazardous processes in the chemical, oil and power generation industries, for the control and instrumentation of aircraft and other transport systems and for the control of industrial machinery. Even in the field of nuclear reactor protection, where designers are particularly conservative, microprocessors are used to implement certain safety functions and may play increasingly important roles in protection systems in the future. Where microprocessors are simply replacing conventional hard-wired control and instrumentation systems no new hazards are created by their use. In the field of robotics, however, the microprocessor has opened up a totally new technology and with it has created possible new and as yet unknown hazards. The paper discusses some of the design and manufacturing techniques which may be used to enhance the reliability of microprocessor based systems and examines the available reliability data on lsi/vlsi microcircuits. 12 references.

  20. Supply chain reliability modelling

    Directory of Open Access Journals (Sweden)

    Eugen Zaitsev

    2012-03-01

    Full Text Available Background: Today it is virtually impossible to operate alone on the international level in the logistics business. This promotes the establishment and development of new integrated business entities - logistic operators. However, such cooperation within a supply chain creates also many problems related to the supply chain reliability as well as the optimization of the supplies planning. The aim of this paper was to develop and formulate the mathematical model and algorithms to find the optimum plan of supplies by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Methods: The mathematical model and algorithms to find the optimum plan of supplies were developed and formulated by using economic criterion and the model for the probability evaluating of non-failure operation of supply chain. Results and conclusions: The problem of ensuring failure-free performance of goods supply channel analyzed in the paper is characteristic of distributed network systems that make active use of business process outsourcing technologies. The complex planning problem occurring in such systems that requires taking into account the consumer's requirements for failure-free performance in terms of supply volumes and correctness can be reduced to a relatively simple linear programming problem through logical analysis of the structures. The sequence of the operations, which should be taken into account during the process of the supply planning with the supplier's functional reliability, was presented.

  1. Reliability and criterion validity of an observation protocol for working technique assessments in cash register work.

    Science.gov (United States)

    Palm, Peter; Josephson, Malin; Mathiassen, Svend Erik; Kjellberg, Katarina

    2016-06-01

    We evaluated the intra- and inter-observer reliability and criterion validity of an observation protocol, developed in an iterative process involving practicing ergonomists, for assessment of working technique during cash register work for the purpose of preventing upper extremity symptoms. Two ergonomists independently assessed 17 15-min videos of cash register work on two occasions each, as a basis for examining reliability. Criterion validity was assessed by comparing these assessments with meticulous video-based analyses by researchers. Intra-observer reliability was acceptable (i.e. proportional agreement >0.7 and kappa >0.4) for 10/10 questions. Inter-observer reliability was acceptable for only 3/10 questions. An acceptable inter-observer reliability combined with an acceptable criterion validity was obtained only for one working technique aspect, 'Quality of movements'. Thus, major elements of the cashiers' working technique could not be assessed with an acceptable accuracy from short periods of observations by one observer, such as often desired by practitioners. Practitioner Summary: We examined an observation protocol for assessing working technique in cash register work. It was feasible in use, but inter-observer reliability and criterion validity were generally not acceptable when working technique aspects were assessed from short periods of work. We recommend the protocol to be used for educational purposes only.

  2. Reliability-Centered Maintenance

    Science.gov (United States)

    1978-12-29

    and Eisenhart et al. (1947) summarized other statistical developments derived at Columbia. The second period of development, which had its roots in...January 1970 (FFA 120). Eisenhart , C., M. W. I-lastay, and W. A. Wallis (1947) Techniques of Statistical Analysis. McGraw-Hill Book Company, Inc., New...Miller, Douglas R. (1976) Abnost Sure Comiparisons ol Renewal Processes and Poisso:i Processes u’to *; Application to Reliabilityj Theo ; t, University of

  3. OSS reliability measurement and assessment

    CERN Document Server

    Yamada, Shigeru

    2016-01-01

    This book analyses quantitative open source software (OSS) reliability assessment and its applications, focusing on three major topic areas: the Fundamentals of OSS Quality/Reliability Measurement and Assessment; the Practical Applications of OSS Reliability Modelling; and Recent Developments in OSS Reliability Modelling. Offering an ideal reference guide for graduate students and researchers in reliability for open source software (OSS) and modelling, the book introduces several methods of reliability assessment for OSS including component-oriented reliability analysis based on analytic hierarchy process (AHP), analytic network process (ANP), and non-homogeneous Poisson process (NHPP) models, the stochastic differential equation models and hazard rate models. These measurement and management technologies are essential to producing and maintaining quality/reliable systems using OSS.

  4. Transit ridership, reliability, and retention.

    Science.gov (United States)

    2008-10-01

    This project explores two major components that affect transit ridership: travel time reliability and rider : retention. It has been recognized that transit travel time reliability may have a significant impact on : attractiveness of transit to many ...

  5. Travel reliability inventory for Chicago.

    Science.gov (United States)

    2013-04-01

    The overarching goal of this research project is to enable state DOTs to document and monitor the reliability performance : of their highway networks. To this end, a computer tool, TRIC, was developed to produce travel reliability inventories from : ...

  6. THE INTRA- AND INTER-RATER RELIABILITY OF THE SOCCER INJURY MOVEMENT SCREEN (SIMS).

    Science.gov (United States)

    McCunn, Robert; Aus der Fünten, Karen; Govus, Andrew; Julian, Ross; Schimpchen, Jan; Meyer, Tim

    2017-02-01

    The growing volume of movement screening research reveals a belief among practitioners and researchers alike that movement quality may have an association with injury risk. However, existing movement screening tools have not considered the sport-specific movement and injury patterns relevant to soccer. The present study introduces the Soccer Injury Movement Screen (SIMS), which has been designed specifically for use within soccer. Furthermore, the purpose of the present study was to assess the intra- and inter-rater reliability of the SIMS and determine its suitability for use in further research. The study utilized a test-retest design to discern reliablility. Twenty-five (11 males, 14 females) healthy, recreationally active university students (age 25.5 ± 4.0 years, height 171 ± 9 cm, weight 64.7 ± 12.6 kg) agreed to participate. The SIMS contains five sub-tests: the anterior reach, single-leg deadlift, in-line lunge, single-leg hop for distance and tuck jump. Each movement was scored out of 10 points and summed to produce a composite score out of 50. The anterior reach and single-leg hop for distance were scored in real-time while the remaining tests were filmed and scored retrospectively. Three raters conducted the SIMS with each participant on three occasions separated by an average of three and a half days (minimum one day, maximum seven days). Rater 1 re-scored the filmed movements for all participants on all occasions six months later to establish the 'pure' intra-rater (intra-occasion) reliability for those movements. Intraclass correlation coefficient (ICC) values for intra- and inter-rater composite score reliability ranged from 0.66-0.72 and 0.79-0.86 respectively. Weighted kappa values representing the intra- and inter-rater reliability of the individual sub-tests ranged from 0.35-0.91 indicating fair to almost perfect agreement. Establishing the reliability of the SIMS is a prerequisite for further research seeking to investigate

  7. Translation, reliability, and clinical utility of the Melbourne Assessment 2.

    Science.gov (United States)

    Gerber, Corinna N; Plebani, Anael; Labruyère, Rob

    2017-10-12

    The aims were to (i) provide a German translation of the Melbourne Assessment 2 (MA2), a quantitative test to measure unilateral upper limb function in children with neurological disabilities and (ii) to evaluate its reliability and aspects of clinical utility. After its translation into German and approval of the back translation by the original authors, the MA2 was performed and videotaped twice with 30 children with neuromotor disorders. For each participant, two raters scored the video of the first test for inter-rater reliability. To determine test-retest reliability, one rater additionally scored the video of the second test while the other rater repeated the scoring of the first video to evaluate intra-rater reliability. Time needed for rater training, test administration, and scoring was recorded. The four subscale scores showed excellent intra-, inter-rater, and test-retest reliability with intraclass correlation coefficients of 0.90-1.00 (95%-confidence intervals 0.78-1.00). Score items revealed substantial to almost perfect intra-rater reliability (weighted kappa k w  = 0.66-1.00) for the more affected side. Score item inter-rater and test-retest reliability of the same extremity were, with one exception, moderate to almost perfect (k w  = 0.42-0.97; k w  = 0.40-0.89). Furthermore, the MA2 was feasible and acceptable for patients and clinicians. The MA2 showed excellent subscale and moderate to almost perfect score item reliability. Implications for Rehabilitation There is a lack of high-quality studies about psychometric properties of upper limb measurement tools in the neuropediatric population. The Melbourne Assessment 2 is a promising tool for reliable measurement of unilateral upper limb movement quality in the neuropediatric population. The Melbourne Assessment 2 is acceptable and practicable to therapists and patients for routine use in clinical care.

  8. PAGs - Public perception and acceptance

    International Nuclear Information System (INIS)

    Quillin, Robert M.

    1989-01-01

    Full text: While Protective Action Guides or PAGs have been a part of the lexicon of the radiation protection field for several decades, the concept of accepting higher levels of risk under certain situations has not received adequate scrutiny by the general public, the media or elected officials. Consequently there is a question as to how implementation of PAGs would be perceived by the above groups in the event that such implementation became necessary. A personal case in point involves the response of an executive in the food industry. When the concept of selling a food product meeting the PAGs was explained his response was, 'we won't sell a contaminated product, we would dump the unprocessed raw food. Our industry image is that of a natural unadulterated food'. While this may be an isolated view, there is a need to determine what is the perception and consequently what would be the response if PAGs were implemented today. If the response was negative by anyone of the three groups listed previously, then there is an obvious need for a program to assure receptiveness by those concerned. However, this may face formidable obstacles. This is because the terms radiation and radioactive have gained generally negative word associations, e.g. 'deadly' radiation and radioactive 'desert'. The former term was recently heard in a taped presentation at a Museum of Natural History on a completely unrelated subject. The latter term was part of a recent article heading in the Wall Street Journal. Incidentally the article was discussing television. Thus beyond the scientific issues of setting PAGs and the administrative and procedural issues of implementing PAGs there is the issue of society's understanding and acceptance of PAGs. Particularly, how can such understanding and acceptance be achieved in a situation which is associated with an actual or perceived radiation emergency? These are not questions that radiation or agricultural scientists can answer alone. These are

  9. Acceptance of Others, Feeling of Being Accepted and Striving for Being Accepted Among the Representatives of Different Kinds of Occupations

    Directory of Open Access Journals (Sweden)

    Gergana Stanoeva

    2012-05-01

    Full Text Available This paper deals with an important issue related to the human attitudes and needs in interpersonal and professional aspects. The theoretical part deals with several psychological components of the self-esteem and esteem of the others – acceptance of the others, feeling of being accepted, need for approval. Some gender differences in manifestations of acceptance and feeling of being accepted at the workplace are discussed. This article presents some empirical data for the degree of acceptance of others, feeling of being accepted and the strive for being accepted among the representatives of helping, pedagogical, administrative and economic occupations, as well as non-qualified workers. The goals of the study were to reveal the interdependency between these constructs and to be found some significant differences between the representatives of the four groups of occupations. The methods of the first study were W. Fey’s scales “Acceptance of others”, and “How do I feel accepted by others”. The method of the second study was Crown and Marlowe Scale for Social Desirability. The results indicated some significant differences in acceptance of others and feeling of being accepted between the non-qualified workers and the representatives of helping, administrative and economic occupations. There were not any significant difference in strive for being accepted between the fouroccupational groups.

  10. Radwaste characteristics and Disposal Facility Waste Acceptance Criteria

    International Nuclear Information System (INIS)

    Sung, Suk Hyun; Jeong, Yi Yeong; Kim, Ki Hong

    2008-01-01

    The purpose of Radioactive Waste Acceptance Criteria (WAC) is to verify a radioactive waste compliance with radioactive disposal facility requirements in order to maintain a disposal facility's performance objectives and to ensure its safety. To develop WAC which is conformable with domestic disposal site conditions, we furthermore analysed the WAC of foreign disposal sites similar to the Kyung-Ju disposal site and the characteristics of various wastes which are being generated from Korea nuclear facilities. Radioactive WAC was developed in the technical cooperation with the Korea Atomic Energy Research Institute in consideration of characteristics of the wastes which are being generated from various facilities, waste generators' opinions and other conditions. The established criteria was also discussed and verified at an advisory committee which was comprised of some experts from universities, institutes and the industry. So radioactive WAC was developed to accept all wastes which are being generated from various nuclear facilities as much as possible, ensuring the safety of a disposal facility. But this developed waste acceptance criteria is not a criteria to accept all the present wastes generated from various nuclear facilities, so waste generators must seek an alternative treatment method for wastes which were not worth disposing of, and then they must treat the wastes more to be acceptable at a disposal site. The radioactive disposal facility WAC will continuously complement certain criteria related to a disposal concentration limit for individual radionuclide in order to ensure a long-term safety.

  11. Religiousness and Rape Myth Acceptance: Risk and Protective Effects.

    Science.gov (United States)

    Ensz, Samantha; Jankowski, Peter J

    2017-03-01

    This study addressed the lack of research simultaneously examining multiple dimensions of religiousness when predicting rape myth acceptance, and extended prior findings of a mediating role for right-wing authoritarianism (i.e., uncritical submission to authority and aggressive attitude toward those who do not conform to social norms) in the association between religiousness and prejudice. The sample consisted of 99 undergraduate and graduate students ( M age = 31.87 years, 66.7% female, 80.82% White, and 93% Christian affiliated) from a religiously affiliated university in the Midwest United States. As hypothesized, dimensions of religiousness exhibited differential associations with rape myth acceptance. Religious motivation characterized by openness and exploration (i.e., quest religiousness) was a significant negative predictor of rape myth acceptance, directly, and indirectly through right-wing authoritarianism. In contrast, rigid adherence to religious beliefs, assumed to be "right" and absolutely true (i.e., religious fundamentalism), and extrinsically motivated religiousness each exhibited a positive association with rape myth acceptance through right-wing authoritarianism. In addition, internally motivated religiousness and religious fundamentalism each moderated the nonlinear effect for quest predicting rape myth acceptance. Findings suggest that uncritical religious and secular submission to external authorities or uncommitted and nonexploring religiousness may have increased the extent to which persons adhered to rape myths, whereas religious exploration was protective. Practical implications center on the need for socioculturally relevant prevention and intervention efforts with religious identifying college students.

  12. 2017 NREL Photovoltaic Reliability Workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-15

    NREL's Photovoltaic (PV) Reliability Workshop (PVRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology -- both critical goals for moving PV technologies deeper into the electricity marketplace.

  13. AECL's reliability and maintainability program

    International Nuclear Information System (INIS)

    Wolfe, W.A.; Nieuwhof, G.W.E.

    1976-05-01

    AECL's reliability and maintainability program for nuclear generating stations is described. How the various resources of the company are organized to design and construct stations that operate reliably and safely is shown. Reliability and maintainability includes not only special mathematically oriented techniques, but also the technical skills and organizational abilities of the company. (author)

  14. User acceptance of mobile notifications

    CERN Document Server

    Westermann, Tilo

    2017-01-01

    This book presents an alternative approach to studying smartphone-app user notifications. It starts with insights into user acceptance of mobile notifications in order to provide tools to support users in managing these. It extends previous research by investigating factors that influence users’ perception of notifications and proposes tools addressing the shortcomings of current systems. It presents a technical framework and testbed as an approach for evaluating the usage of mobile applications and notifications, and then discusses a series of studies based on this framework that investigate factors influencing users’ perceptions of mobile notifications. Lastly, a set of design guidelines for the usage of mobile notifications is derived that can be employed to support users in handling notifications on smartphones.

  15. DISPOSABLE CANISTER WASTE ACCEPTANCE CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    R.J. Garrett

    2001-07-30

    The purpose of this calculation is to provide the bases for defining the preclosure limits on radioactive material releases from radioactive waste forms to be received in disposable canisters at the Monitored Geologic Repository (MGR) at Yucca Mountain. Specifically, this calculation will provide the basis for criteria to be included in a forthcoming revision of the Waste Acceptance System Requirements Document (WASRD) that limits releases in terms of non-isotope-specific canister release dose-equivalent source terms. These criteria will be developed for the Department of Energy spent nuclear fuel (DSNF) standard canister, the Multicanister Overpack (MCO), the naval spent fuel canister, the High-Level Waste (HLW) canister, the plutonium can-in-canister, and the large Multipurpose Canister (MPC). The shippers of such canisters will be required to demonstrate that they meet these criteria before the canisters are accepted at the MGR. The Quality Assurance program is applicable to this calculation. The work reported in this document is part of the analysis of DSNF and is performed using procedure AP-3.124, Calculations. The work done for this analysis was evaluated according to procedure QAP-2-0, Control of Activities, which has been superseded by AP-2.21Q, Quality Determinations and Planning for Scientific, Engineering, and Regulatory Compliance Activities. This evaluation determined that such activities are subject to the requirements of DOE/RW/0333P, Quality Assurance Requirements and Description (DOE 2000). This work is also prepared in accordance with the development plan titled Design Basis Event Analyses on DOE SNF and Plutonium Can-In-Canister Waste Forms (CRWMS M&O 1999a) and Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages (CRWMS M&O 2000d). This calculation contains no electronic data applicable to any electronic data management system.

  16. Business of reliability

    Science.gov (United States)

    Engel, Pierre

    1999-12-01

    The presentation is organized around three themes: (1) The decrease of reception equipment costs allows non-Remote Sensing organization to access a technology until recently reserved to scientific elite. What this means is the rise of 'operational' executive agencies considering space-based technology and operations as a viable input to their daily tasks. This is possible thanks to totally dedicated ground receiving entities focusing on one application for themselves, rather than serving a vast community of users. (2) The multiplication of earth observation platforms will form the base for reliable technical and financial solutions. One obstacle to the growth of the earth observation industry is the variety of policies (commercial versus non-commercial) ruling the distribution of the data and value-added products. In particular, the high volume of data sales required for the return on investment does conflict with traditional low-volume data use for most applications. Constant access to data sources supposes monitoring needs as well as technical proficiency. (3) Large volume use of data coupled with low- cost equipment costs is only possible when the technology has proven reliable, in terms of application results, financial risks and data supply. Each of these factors is reviewed. The expectation is that international cooperation between agencies and private ventures will pave the way for future business models. As an illustration, the presentation proposes to use some recent non-traditional monitoring applications, that may lead to significant use of earth observation data, value added products and services: flood monitoring, ship detection, marine oil pollution deterrent systems and rice acreage monitoring.

  17. Chinese version of the Constant-Murley questionnaire for shoulder pain and disability: a reliability and validation study.

    Science.gov (United States)

    Yao, Min; Yang, Long; Cao, Zuo-Yuan; Cheng, Shao-Dan; Tian, Shuang-Lin; Sun, Yue-Li; Wang, Jing; Xu, Bao-Ping; Hu, Xiao-Chun; Wang, Yong-Jun; Zhang, Ying; Cui, Xue-Jun

    2017-09-18

    Shoulder pain is a common musculoskeletal disorder in Chinese population, which affects more than 1,3 billion individuals. To the best of our knowledge, there has been no available Chinese-language version of measurements of shoulder pain and disability so far. Moreover, the Constant-Murley score (CMS) questionnaire is a universally recognized patient-reported questionnaire for clinical practice and research. The present study was designed to evaluate a Chinese translational version of CMS and subsequently assess its reliability and validity. The Chinese translational version of CMS was formulated by means of forward-backward translation. Meanwhile, a final review was carried out by an expert committee, followed by conducting a test of the pre-final version. Therefore, the reliability and validity of the Chinese translational version of CMS could be assessed using the internal consistency, construct validity, factor analysis, reliability and floor and ceiling effects. Specifically, the reliability was assessed by testing the internal consistency (Cronbach's α) and test-retest reliability (intraclass coefficient correlation [ICC]), while the construct validity was evaluated via comparison between the Chinese translational version of CMS with visual analog scale (VAS) score and the 36-Item Short Form Health Survey (SF-36, Spearman correlation). The questionnaire was verified to be acceptable after distribution among 120 subjects with unilateral shoulder pain. Factor analysis had revealed a two-factor and 10-item solution. Moreover, the assessment results indicated that the Chinese translational version of CMS questionnaire harbored good internal consistency (Cronbach's α = 0.739) and test-retest reliability (ICC = 0.827). In addition, the Chinese translational version of CMS was moderately correlated with VAS score (r = 0.497) and SF-36 (r = 0.135). No obvious floor and ceiling effects were observed in the Chinese translational version of CMS questionnaire

  18. Integration of Interests at University

    Science.gov (United States)

    Koshkin, Andrey; Yablochkina, Irina; Kornilova, Irina; Novikov, Andrey

    2017-01-01

    University students and instructors constantly correlate their personal interests with generally accepted interests and corporate norms. The process of assimilating organizational norms is not always characterized by the optimum dynamics and focus among all the students and even instructors. Students' and instructors' personal interests often do…

  19. Design Criteria for Achieving Acceptable Indoor Radon Concentration

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2016-01-01

    Design criteria for achieving an acceptable indoor radon concentration are presented in this paper. The paper suggests three design criteria. These criteria have to be considered at the early stage of the building design phase to meet the latest recommendations from the World Health Organization...... in most countries. The three design criteria are; first, establishing a radon barrier facing the ground; second, lowering the air pressure in the lower zone of the slab on ground facing downwards; third, diluting the indoor air with outdoor air. The first two criteria can prevent radon from infiltrating...... from the ground, and the third criteria can dilute the indoor air. By combining these three criteria, the indoor radon concentration can be lowered achieving an acceptable level. In addition, a cheap and reliable method for measuring the radon concentration in the indoor air is described. The provision...

  20. Smart Home Technologies: Insights into Generation-Specific Acceptance Motives

    Science.gov (United States)

    Gaul, Sylvia; Ziefle, Martina

    In this research we examine the generation specific acceptance motives of eHealth technologies in order to assess the likelihood of success for these new technologies. 280 participants (14 - 92 years of age) volunteered to participate in a survey, in which using motives and barriers toward smart home technologies were explored. The scenario envisaged was the use of a medical stent implemented into the body, which monitors automatically the health status and which is able to remotely communicate with the doctor. Participants were asked to evaluate the pros and cons of the usage of this technology, their acceptance motives and potential utilization barriers. In order to understand the complex nature of acceptance, personal variables (age, technical expertise, health status), individual's cognitive concepts toward ageing as well as perceived usefulness were related. Outcomes show that trust, believe in the reliability of technology, privacy and security as well as intimacy facets are essential for acceptance and should be considered in order to proactively design a successful rollout of smart home technologies.

  1. The Acceptance Strategy for Nuclear Power Plant In Indonesia

    Science.gov (United States)

    Suhaemi, Tjipta; Syaukat, Achmad

    2010-06-01

    THE ACCEPTANCE STRATEGY FOR NUCLEAR POWER PLANT IN INDONESIA. Indonesia has planned to build nuclear power plants. Some feasibility studies have been conducted intensively. However, the processes of NPP introduction are still uncertain. National Energy Plan in Indonesia, which has been made by some governmental agencies, does not yet give positive impact to the government decision to construct the nuclear power plant (NPP). This paper discusses the process of NPP introduction in Indonesia, which has been colored with debate of stakeholder and has delayed decision for go-nuclear. The technology paradigm is used to promote NPP as an alternative of reliable energy resources. This paradigm should be complemented with international politic-economic point of view. The international politic-economic point of view shows that structural powers, consisting of security, production, finance, and knowledge structures, within which the NPP is introduced, have dynamic characteristics. The process of NPP introduction in Indonesia contains some infrastructure development (R&D, legislation, regulation, energy planning, site study, public acceptance efforts, etc), but they need a better coherent NPP implementation program and NPP Acceptance Program. Strategic patterns for NPP acceptance described in this paper are made by considering nuclear regulation development and the interest of basic domestic participation. The first NPP program in Indonesia having proven technology and basic domestic participation is and important milestone toward and optimal national energy-mix.

  2. Derivation of the acceptance and self-worth adjustment scale.

    Science.gov (United States)

    Tabrett, Daryl R; Latham, Keziah

    2010-11-01

    The original 55-item Nottingham Adjustment Scale (NAS) is a first generation self-report instrument constructed using classical test theory to evaluate adjustment to vision loss. This study assesses the function of the NAS using Rasch analysis in a sample of adults with visual impairment and presents a revised second-generation instrument. Ninety-nine subjects with established vision loss (median onset 5 years) were administered the NAS. Rasch analysis was performed to: (1) determine optimum response scale function, (2) aid item reduction, (3) determine reliability indices and item targeting, (4) assess unidimensionality using Rasch-based principal component analysis, (5) assess differential item functioning (notable defined as >1.0 logit), and (6) formulate person measures to correlate with Geriatric Depression Scale scores and distance visual acuity to indicate convergent and discriminant validity, respectively. Response categories exhibited underutilization, which when repaired improved response scale functioning and ordered structural calibrations. Misfitting items were removed iteratively until all items had mean-square infit and outfit values of 0.70 to 1.30. However, principal component analysis confirmed insufficient unidimensionality (two contrasts identified, eigenvalues 2.4 and 2.3). Removal of these contrasts and two further iterations restored unidimensionality. Despite item mistargeting (1.58 logits), the revised 19-item instrument demonstrated good person (0.85) and item (0.96) reliability coefficients, good convergent and discriminant validity, and no systematic differential item functioning. The resultant 19-item instrument was termed the Acceptance and Self-Worth Adjustment Scale (AS-WAS). In those with established vision loss, the 19-item Acceptance and Self-Worth Adjustment Scale is a reliable and valid instrument that estimates the level of adjustment concerned with acceptance, attitudes, self-esteem, self-efficacy, and locus of control. An

  3. Cultural universals: So what?

    Directory of Open Access Journals (Sweden)

    M. Elaine Botha

    1989-03-01

    Full Text Available The search for the elusive "cultural universal s” in a variety of academic disciplines has been motivated b y the spectre of relativism in its diverse guises. The problem of relativism has been thrust upon us inter alia by the inability of our epistemological models to account for social and cultural, moral and cognitive diversity and to provide us with criteria by means of which to judge aberrations like ideologies. Contrary to the general trend I would like to argue that it is not the spectre of relativism in its various guises which necessitates the search for cultural universals, nor is this the only motivation for a Christian to argue in favour of the recognition of cultural universals. Various authors have suggested that such universal structures do exist; that they condition human and societal behaviour and that it would in principle be possible to construct a theory of these structural universals or a "biogrammar" or "geography ” of the universal cultural acquisition device of humankind (cf. Harre,1976, 32; Johnson, 1987: xxxvii ; Tige r and Fox, 1974:17,30. Cross -cu ltural research in both psychology and anthropology has pointed to the existence of such traits, and in recent philosophical discussions Apel and others have pointed to the necessity of recognizing the existence of some sort of " transcendentalia" . These arguments emphasize elements that are common to diverse approaches to the problem of cultural universals. Christian scholars could accept most of these arguments as valid and yet argue in favour of a very specifically modified version of the notion of cultural universals. This essay attempts to develop such a position.

  4. Antecedents to Consumers' Acceptance of Mobile Advertisements

    DEFF Research Database (Denmark)

    Rajala, Risto; Westerlund, Mika

    2010-01-01

    The paper presents a hierarchical construct PLS structural equation model to analyze mobile advertisement acceptance. Hypotheses are established and tested about the hierarchical structure and the effects of the factors that precede consumers' behavioral intention to accept mobile advertisement....... The results suggest that valuable content and trust in advertisers are key predictors of mobile device users' acceptance of mobile advertising. In addition, subjective value of the ads and subjective norms mediate these antecedent-acceptance relationships. The results are invaluable to both scholars...

  5. Reliability-guided digital image correlation for image deformation measurement

    International Nuclear Information System (INIS)

    Pan Bing

    2009-01-01

    A universally applicable reliability-guided digital image correlation (DIC) method is proposed for reliable image deformation measurement. The zero-mean normalized cross correlation (ZNCC) coefficient is used to identify the reliability of the point computed. The correlation calculation begins with a seed point and is then guided by the ZNCC coefficient. That means the neighbors of the point with the highest ZNCC coefficient in a queue for computed points will be processed first. Thus the calculation path is always along the most reliable direction, and possible error propagation of the conventional DIC method can be avoided. The proposed novel DIC method is universally applicable to the images with shadows, discontinuous areas, and deformation discontinuity. Two image pairs were used to evaluate the performance of the proposed technique, and the successful results clearly demonstrate its robustness and effectiveness

  6. NDE reliability gains from combining eddy-current and ultrasonic testing

    International Nuclear Information System (INIS)

    Horn, D.; Mayo, W.R.

    1999-01-01

    We investigate statistical methods for combining the results of two complementary inspection techniques, eddy-current and ultrasonic testing. The reliability of rejection/acceptance decisions based on combined information is compared with that based on each inspection technique individually. The measured reliability increases with the amount of information incorporated in the decision. (author)

  7. A Meta-Analysis of Reliability Coefficients in Second Language Research

    Science.gov (United States)

    Plonsky, Luke; Derrick, Deirdre J.

    2016-01-01

    Ensuring internal validity in quantitative research requires, among other conditions, reliable instrumentation. Unfortunately, however, second language (L2) researchers often fail to report and even more often fail to interpret reliability estimates beyond generic benchmarks for acceptability. As a means to guide interpretations of such estimates,…

  8. Electronics reliability calculation and design

    CERN Document Server

    Dummer, Geoffrey W A; Hiller, N

    1966-01-01

    Electronics Reliability-Calculation and Design provides an introduction to the fundamental concepts of reliability. The increasing complexity of electronic equipment has made problems in designing and manufacturing a reliable product more and more difficult. Specific techniques have been developed that enable designers to integrate reliability into their products, and reliability has become a science in its own right. The book begins with a discussion of basic mathematical and statistical concepts, including arithmetic mean, frequency distribution, median and mode, scatter or dispersion of mea

  9. Public information - the crucial element in nuclear power acceptance

    International Nuclear Information System (INIS)

    Hayes, R.; Middlemiss, N.

    1996-01-01

    The British nuclear industry approach to the public information is described as the crucial element in nuclear power acceptance. The industry need to be a reliable, trustworthy source of information. There is evidence that when issues are examined in court or in quasi-judicial contexts, the public gains a better appreciation of the issues. The media report both sides of debate more evenly. Therefore the best way to deal with the most hostile opposition may be to take into a legal framework, rather than engage in hand-to-hand battle

  10. A particle identification technique for large acceptance spectrometers

    International Nuclear Information System (INIS)

    Cappuzzello, F.; Cavallaro, M.; Cunsolo, A.; Foti, A.; Carbone, D.; Orrigo, S.E.A.; Rodrigues, M.R.D.

    2010-01-01

    A technique to identify the heavy ions produced in nuclear reactions is presented. It is based on the use of a hybrid detector, which measures the energy loss, the residual energy, the position and angle of the ions at the focal plane of a magnetic spectrometer. The key point is the use of a powerful algorithm for the reconstruction of the ion trajectory, which makes the technique reliable even with large acceptance optical devices. Experimental results with the MAGNEX spectrometer show a remarkable resolution of about 1/160 in the mass parameter.

  11. Public information - the crucial element in nuclear power acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, R; Middlemiss, N [British Nuclear Industry Forum, London (United Kingdom)

    1996-07-01

    The British nuclear industry approach to the public information is described as the crucial element in nuclear power acceptance. The industry need to be a reliable, trustworthy source of information. There is evidence that when issues are examined in court or in quasi-judicial contexts, the public gains a better appreciation of the issues. The media report both sides of debate more evenly. Therefore the best way to deal with the most hostile opposition may be to take into a legal framework, rather than engage in hand-to-hand battle.

  12. 46 CFR 28.73 - Accepted organizations.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Accepted organizations. 28.73 Section 28.73 Shipping... INDUSTRY VESSELS General Provisions § 28.73 Accepted organizations. An organization desiring to be designated by the Commandant as an accepted organization must request such designation in writing. As a...

  13. Older Adults' Acceptance of Information Technology

    Science.gov (United States)

    Wang, Lin; Rau, Pei-Luen Patrick; Salvendy, Gavriel

    2011-01-01

    This study investigated variables contributing to older adults' information technology acceptance through a survey, which was used to find factors explaining and predicting older adults' information technology acceptance behaviors. Four factors, including needs satisfaction, perceived usability, support availability, and public acceptance, were…

  14. Relevant cost information for order acceptance decisions

    NARCIS (Netherlands)

    Wouters, M.J.F.

    1997-01-01

    Some economic considerations for order acceptance decisions are discussed. The relevant economic considerations for order acceptance are widely discussed in the literature: only those costs are relevant which would be avoidable by not accepting the order incremental costs plus opportunity costs .

  15. Credit in Acceptance Sampling on Attributes

    NARCIS (Netherlands)

    Klaassen, Chris A.J.

    2000-01-01

    Credit is introduced in acceptance sampling on attributes and a Credit Based Acceptance sampling system is developed that is very easy to apply in practice.The credit of a producer is defined as the total number of items accepted since the last rejection.In our sampling system the sample size for a

  16. Mathematical reliability an expository perspective

    CERN Document Server

    Mazzuchi, Thomas; Singpurwalla, Nozer

    2004-01-01

    In this volume consideration was given to more advanced theoretical approaches and novel applications of reliability to ensure that topics having a futuristic impact were specifically included. Topics like finance, forensics, information, and orthopedics, as well as the more traditional reliability topics were purposefully undertaken to make this collection different from the existing books in reliability. The entries have been categorized into seven parts, each emphasizing a theme that seems poised for the future development of reliability as an academic discipline with relevance. The seven parts are networks and systems; recurrent events; information and design; failure rate function and burn-in; software reliability and random environments; reliability in composites and orthopedics, and reliability in finance and forensics. Embedded within the above are some of the other currently active topics such as causality, cascading, exchangeability, expert testimony, hierarchical modeling, optimization and survival...

  17. Universe symmetries

    International Nuclear Information System (INIS)

    Souriau, J.M.

    1984-01-01

    The sky uniformity can be noticed in studying the repartition of objects far enough. The sky isotropy description uses space rotations. The group theory elements will allow to give a meaning at the same time precise and general to the word a ''symmetry''. Universe models are reviewed, which must have both of the following qualities: - conformity with the physic known laws; - rigorous symmetry following one of the permitted groups. Each of the models foresees that universe evolution obeys an evolution equation. Expansion and big-bang theory are recalled. Is universe an open or closed space. Universe is also electrically neutral. That leads to a work hypothesis: the existing matter is not given data of universe but it appeared by evolution from nothing. Problem of matter and antimatter is then raised up together with its place in universe [fr

  18. Estimation of reliability of a interleaving PFC boost converter

    Directory of Open Access Journals (Sweden)

    Gulam Amer Sandepudi

    2010-01-01

    Full Text Available Reliability plays an important role in power supplies. For other electronic equipment, a certain failure mode, at least for a part of the total system, can often be employed without serious (critical effects. However, for power supply no such condition can be accepted, since very high demands on its reliability must be achieved. At higher power levels, the continuous conduction mode (CCM boost converter is preferred topology for implementation a front end with PFC. As a result, significant efforts have been made to improve the performance of high boost converter. This paper is one of the efforts for improving the performance of the converter from the reliability point of view. In this paper, interleaving boost power factor correction converter is simulated with single switch in continuous conduction mode (CCM, discontinuous conduction mode (DCM and critical conduction mode (CRM under different output power ratings. Results of the converter are explored from reliability point of view.

  19. The reliability and validity of a sexual functioning questionnaire.

    Science.gov (United States)

    Corty, E W; Althof, S E; Kurit, D M

    1996-01-01

    The present study assessed the reliability and validity of a measure of sexual functioning, the CMSH-SFQ, for male patients and their partners. The CMSH-SFQ measures erectile and orgasmic functioning, sexual drive, frequency of sexual behavior, and sexual satisfaction. Test-retest reliability was assessed with 19 males and 19 females for the baseline CMSH-SFQ. Criterion validity was measured by comparing the answers of 25 male patients to those of their partners at baseline and follow-up. The majority of items had acceptable levels of reliability and validity. The CMSH-SFQ provides a reliable and valid device that can be used to measure global sexual functioning in men and their partners and may be used to evaluate the efficacy of treatments for sexual dysfunctions. Limitations and suggestions for use of the CMSH-SFQ are addressed.

  20. Nuclear waste in public acceptance

    International Nuclear Information System (INIS)

    Vastchenko, Svetlana V.

    2003-01-01

    The existing problem on a faithful acceptance of nuclear information by population is connected, to a considerable extent, with a bad nuclear 'reputation' because of a great amount of misrepresented and false information from 'the greens'. In contrast to a bare style of professionals often neglecting an emotional perception, a loud voice of 'the greens' appeals both to the head, and to the heart of the audience. People pattern their behaviour weakly on problems of safe application of different irradiation sources in industry, conditions of life, medicine and everyday life. Radiation danger of some sources is often exaggerated (computers, nuclear technologies, radiation treatment) and the danger of the others is, on the contrary, underestimated (nuclear and roentgen methods of diagnostics and medical treatment). The majority of our citizens do not know which level of radiation is normal and safe, which ways radioactive substances intake into the organism of a human being and how to diminish the dose load on the organism by simple measures. Only specialists can be orientated themselves in a great number of radiation units. Low level of knowledge of the population and false conceptions are connected with the fact that they are mainly informed about nuclear technologies from mass media, where the voice of 'Greenpeace' is loudly sounded, but they often give misrepresented and false information doing it in the very emotional form. In contrast to them, scientists-professionals often ignore a sensitive part of apprehending of information and do not attach importance to it. As a rule, the style of specialists is of a serious academician character when they meet with the public. People preconception to nuclear waste and distrust to a positive information concerning nuclear technologies are explained, to a considerable extent, by a bivalent type of thinking when people operate by two opposite conceptions only, such as 'there is' or 'there is not' (there is or there is not

  1. Nuclear waste in public acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Vastchenko, Svetlana V. [Joint Institute for Power and Nuclear Research - Sosny / National Academy of Science, A.K.Krasin Str., 99, Minsk 220109 (Belarus)

    2003-07-01

    The existing problem on a faithful acceptance of nuclear information by population is connected, to a considerable extent, with a bad nuclear 'reputation' because of a great amount of misrepresented and false information from 'the greens'. In contrast to a bare style of professionals often neglecting an emotional perception, a loud voice of 'the greens' appeals both to the head, and to the heart of the audience. People pattern their behaviour weakly on problems of safe application of different irradiation sources in industry, conditions of life, medicine and everyday life. Radiation danger of some sources is often exaggerated (computers, nuclear technologies, radiation treatment) and the danger of the others is, on the contrary, underestimated (nuclear and roentgen methods of diagnostics and medical treatment). The majority of our citizens do not know which level of radiation is normal and safe, which ways radioactive substances intake into the organism of a human being and how to diminish the dose load on the organism by simple measures. Only specialists can be orientated themselves in a great number of radiation units. Low level of knowledge of the population and false conceptions are connected with the fact that they are mainly informed about nuclear technologies from mass media, where the voice of 'Greenpeace' is loudly sounded, but they often give misrepresented and false information doing it in the very emotional form. In contrast to them, scientists-professionals often ignore a sensitive part of apprehending of information and do not attach importance to it. As a rule, the style of specialists is of a serious academician character when they meet with the public. People preconception to nuclear waste and distrust to a positive information concerning nuclear technologies are explained, to a considerable extent, by a bivalent type of thinking when people operate by two opposite conceptions only, such as 'there is

  2. Quantitative measurement of hypertrophic scar: interrater reliability and concurrent validity.

    Science.gov (United States)

    Nedelec, Bernadette; Correa, José A; Rachelska, Grazyna; Armour, Alexis; LaSalle, Léo

    2008-01-01

    Research into the pathophysiology and treatment of hypertrophic scar (HSc) remains limited by the heterogeneity of scar and the imprecision with which its severity is measured. The objective of this study was to test the interrater reliability and concurrent validity of the Cutometer measurement of elasticity, the Mexameter measurement of erythema and pigmentation, and total thickness measure of the DermaScan C relative to the modified Vancouver Scar Scale (mVSS) in patient-matched normal skin, normal scar, and HSc. Three independent investigators evaluated 128 sites (severe HSc, moderate or mild HSc, donor site, and normal skin) on 32 burn survivors using all of the above measurement tools. The intraclass correlation coefficient, which was used to measure interrater reliability, reflects the inherent amount of error in the measure and is considered acceptable when it is >0.75. Interrater reliability of the totals of the height, pliability, and vascularity subscales of the mVSS fell below the acceptable limit ( congruent with0.50). The individual subscales of the mVSS fell well below the acceptable level (0.89) for each study site with the exception of severe scar. Mexameter and DermaScan C reliability measurements were acceptable for all sites (>0.82). Concurrent validity correlations with the mVSS were significant except for the comparison of the mVSS pliability subscale and the Cutometer maximum deformation measure comparison in severe scar. In conclusion, the Mexameter and DermaScan C measurements of scar color and thickness of all sites, as well as the Cutometer measurement of elasticity in all but the most severe scars shows high interrater reliability. Their significant concurrent validity with the mVSS confirms that these tools are measuring the same traits as the mVSS, and in a more objective way.

  3. Of plants and reliability

    International Nuclear Information System (INIS)

    Schneider Horst

    2009-01-01

    Behind the political statements made about the transformer event at the Kruemmel nuclear power station (KKK) in the summer of 2009 there are fundamental issues of atomic law. Pursuant to Articles 20 and 28 of its Basic Law, Germany is a state in which the rule of law applies. Consequently, the aspects of atomic law associated with the incident merit a closer look, all the more so as the items concerned have been known for many years. Important aspects in the debate about the Kruemmel nuclear power plant are the fact that the transformer is considered part of the nuclear power station under atomic law and thus a ''plant'' subject to surveillance by the nuclear regulatory agencies, on the one hand, and the reliability under atomic law of the operator and the executive personnel responsible, on the other hand. Both ''plant'' and ''reliability'' are terms focusing on nuclear safety. Hence the question to what extent safety was affected in the Kruemmel incident. The classification of the event as 0 = no or only a very slight safety impact on the INES scale (INES = International Nuclear Event Scale) should not be used to put aside the safety issue once and for all. Points of fact and their technical significance must be considered prior to any legal assessment. Legal assessments and regulations are associated with facts and circumstances. Any legal examination is based on the facts as determined and elucidated. Any other procedure would be tantamount to an inadmissible legal advance conviction. Now, what is the position of political statements, i.e. political assessments and political responsibility? If everything is done the correct way, they come at the end, after exploration of the facts and evaluation under applicable law. Sometimes things are handled differently, with consequences which are not very helpful. In the light of the provisions about the rule of law as laid down in the Basic Law, the new federal government should be made to observe the proper sequence of

  4. Public acceptance of HTGR technology - HTR2008-58218

    International Nuclear Information System (INIS)

    Hannink, R.; Kuhr, R.; Morris, T.

    2008-01-01

    Nuclear energy projects continue to evoke strong emotional responses from the general public throughout the world. High Temperature Gas-Cooled Reactor (HTGR) technology offers improved safety and performance characteristics that should enhance public acceptance but is burdened with demonstrating a different set of safety principles. This paper summarizes key issues impacting public acceptance and discusses the importance of openly engaging the public in the early stages of new HTGR projects. The public gets information about new technologies through schools and universities, news and entertainment media, the internet, and other forms of information exchange. Development of open public forums, access to information in understandable formats, participation of universities in preparing and distributing educational materials, and other measures will be needed to support widespread public confidence in the improved safety and performance characteristics of HTGR technology. This confidence will become more important as real projects evolve and participants from outside the nuclear industry begin to evaluate the real and perceived risks, including potential impacts on public relations, branding, and shareholder value when projects are announced. Public acceptance and support will rely on an informed understanding of the issues and benefits associated with HTGR technology. Major issues of public concern include nuclear safety, avoidance of greenhouse gas emissions, depletion of natural gas resources, energy security, nuclear waste management, local employment and economic development, energy prices, and nuclear proliferation. Universities, the media, private industry, government entities, and other organizations will all have roles that impact public acceptance, which will likely play a critical role in the future markets, siting, and permitting of HTGR projects. (authors)

  5. Multinomial-exponential reliability function: a software reliability model

    International Nuclear Information System (INIS)

    Saiz de Bustamante, Amalio; Saiz de Bustamante, Barbara

    2003-01-01

    The multinomial-exponential reliability function (MERF) was developed during a detailed study of the software failure/correction processes. Later on MERF was approximated by a much simpler exponential reliability function (EARF), which keeps most of MERF mathematical properties, so the two functions together makes up a single reliability model. The reliability model MERF/EARF considers the software failure process as a non-homogeneous Poisson process (NHPP), and the repair (correction) process, a multinomial distribution. The model supposes that both processes are statistically independent. The paper discusses the model's theoretical basis, its mathematical properties and its application to software reliability. Nevertheless it is foreseen model applications to inspection and maintenance of physical systems. The paper includes a complete numerical example of the model application to a software reliability analysis

  6. Reliability and Validity of the Turkish Version of the PedsQL 3.0 Cancer Module for 2- to 7-Year-Old and the PedsQL 4.0 Generic Core Scales for 5- to 7-Year-Old: The Hacettepe University Experience.

    Science.gov (United States)

    Yıldız Kabak, Vesile; Yakut, Yavuz; Çetin, Mualla; Düger, Tülin

    2016-09-05

    The aim of this study was to investigate the reliability and validity of the Turkish version of the Pediatric Quality of Life Inventory (PedsQL) 3.0 Cancer Module for 2- to 7-year-old and the PedsQL 4.0 Generic Core Scales for 5- to 7-year-old in childhood cancer. The PedsQL 3.0 Cancer Module and PedsQL 4.0 Generic Core Scales were administered to children with cancer and their parents at Hacettepe University. Internal consistency was determined by using Cronbach's alpha and test-retest reliability was determined by using the intraclass correlation coefficient (ICC). Construct validity was assessed by comparing the results of the PedsQL 3.0 Cancer Module with those of the PedsQL 4.0 Generic Core Scales. Cronbach's alpha of the PedsQL 3.0 Cancer Module varied from 0.803 to 0.873 and that of the PedsQL 4.0 Generic Core Scales from 0.665 to 0.841. Test-retest ICC values of the PedsQL 3.0 Cancer Module varied from 0.877 to 0.949 and those of the PedsQL 4.0 Generic Core Scales from 0.681 to 0.824. The correlation of the PedsQL 3.0 Cancer Module with subscale scores of the PedsQL 4.0 Generic Core Scales showed that there were excellent to fair correlations between the two scales. The relationship between parent proxy-report and child self-report of the PedsQL 3.0 Cancer Module had very good correlation (r=0.694, p3.0 Cancer Module in 2- to 4-year-old and 5- to 7-year-old and the PedsQL 4.0 Generic Core Scales in 5- to 7-year-old in childhood cancer.

  7. Reliability and Validity of the Turkish Version of the PedsQL 3.0 Cancer Module for 2- to 7-Year-Old and the PedsQL 4.0 Generic Core Scales for 5- to 7-Year-Old: The Hacettepe University Experience

    Science.gov (United States)

    Yıldız Kabak, Vesile; Yakut, Yavuz; Çetin, Mualla; Düger, Tülin

    2016-01-01

    Objective: The aim of this study was to investigate the reliability and validity of the Turkish version of the Pediatric Quality of Life Inventory (PedsQL) 3.0 Cancer Module for 2- to 7-year-old and the PedsQL 4.0 Generic Core Scales for 5- to 7-year-old in childhood cancer. Materials and Methods: The PedsQL 3.0 Cancer Module and PedsQL 4.0 Generic Core Scales were administered to children with cancer and their parents at Hacettepe University. Internal consistency was determined by using Cronbach’s alpha and test-retest reliability was determined by using the intraclass correlation coefficient (ICC). Construct validity was assessed by comparing the results of the PedsQL 3.0 Cancer Module with those of the PedsQL 4.0 Generic Core Scales. Results: Cronbach’s alpha of the PedsQL 3.0 Cancer Module varied from 0.803 to 0.873 and that of the PedsQL 4.0 Generic Core Scales from 0.665 to 0.841. Test-retest ICC values of the PedsQL 3.0 Cancer Module varied from 0.877 to 0.949 and those of the PedsQL 4.0 Generic Core Scales from 0.681 to 0.824. The correlation of the PedsQL 3.0 Cancer Module with subscale scores of the PedsQL 4.0 Generic Core Scales showed that there were excellent to fair correlations between the two scales. The relationship between parent proxy-report and child self-report of the PedsQL 3.0 Cancer Module had very good correlation (r=0.694, p3.0 Cancer Module in 2- to 4-year-old and 5- to 7-year-old and the PedsQL 4.0 Generic Core Scales in 5- to 7-year-old in childhood cancer. PMID:27095607

  8. Harmony in Life Scale - Turkish version: Studies of validity and reliability

    Directory of Open Access Journals (Sweden)

    Seydi Ahmet Satici

    2017-11-01

    Full Text Available Abstract This article presents the adaptation and psychometric evaluation of the Turkish version of Harmony in Life Scale (Turkish-HiL. The present paper investigates (study 1; N 1 = 253 confirmatory factor analysis, measurement invariance; (study 2; N 2 = 231 concurrent validity; (study 3; N 3 = 260 convergent and known-group validities; (study 4; N t − t = 50 test-retest, Cronbach alpha, and composite reliabilities of the Turkish-HiL. In study 1, based on a confirmatory factor analysis, results confirmed that unidimensional-factor structure. The results suggested that the model demonstrated a configural and metric invariance across the gender groups. In study 2, Turkish-HiL significantly correlated with measures of satisfaction with life, subjective happiness, positive affect, and negative affect. In study 3, Turkish-HiL was predicted positively by flourishing, conversely, negatively predicted by depression, anxiety, and stress. Finally, in study 4, alpha, composite and test-retest reliabilities are acceptable. Overall, the scale presented here may prove useful for satisfactorily assessing, in Turkish, the harmony in life of the university students.

  9. Quality assurance and reliability

    International Nuclear Information System (INIS)

    Normand, J.; Charon, M.

    1975-01-01

    Concern for obtaining high-quality products which will function properly when required to do so is nothing new - it is one manifestation of a conscientious attitude to work. However, the complexity and cost of equipment and the consequences of even temporary immobilization are such that it has become necessary to make special arrangements for obtaining high-quality products and examining what one has obtained. Each unit within an enterprise must examine its own work or arrange for it to be examined; a unit whose specific task is quality assurance is responsible for overall checking, but does not relieve other units of their responsibility. Quality assurance is a form of mutual assistance within an enterprise, designed to remove the causes of faults as far as possible. It begins very early in a project and continues through the ordering stage, construction, start-up trials and operation. Quality and hence reliability are the direct result of what is done at all stages of a project. They depend on constant attention to detail, for even a minor piece of poor workmanship can, in the case of an essential item of equipment, give rise to serious operational difficulties

  10. Toxic chemical risk acceptance criteria

    International Nuclear Information System (INIS)

    Craig, D.K.; Davis, J.; Lee, L.; Lein, P.; Omberg, S.

    1992-01-01

    This paper presents recommendations of a subcommittee of the Westinghouse M ampersand 0 Nuclear Facility Safety Committee concerning toxic chemical risk acceptance criteria. Two sets of criteria have been developed, one for use in the hazard classification of facilities, and the second for use in comparing risks in DOE non-reactor nuclear facility Safety Analysis Reports. The Emergency Response Planning Guideline (ERPG) values are intended to provide estimates of concentration ranges for specific chemicals above which exposure would be expected to lead to adverse heath effects of increasing severity for ERPG-1, -2, and -3s. The subcommittee recommends that criteria for hazard class or risk range be based on ERPGs for all chemicals. Probability-based Incremental Cancer Risk (ICR) criteria are recommended for additional analyses of risks from all known or suspected human carcinogens. Criteria are given for both on-site and off-site exposure. The subcommittee also recommends that the 5-minute peak concentration be compared with the relevant criterion with no adjustment for exposure time. Since ERPGs are available for only a limited number of chemicals, the subcommittee has developed a proposed hierarchy of concentration limit parameters for the different criteria

  11. Consumer acceptance of irradiated foods

    International Nuclear Information System (INIS)

    Feenstra, M.H.; Scholten, A.H.

    1991-01-01

    Although the first experiments on food irradiation were carried out in 1916 in Sweden, food irradiation, is for consumers, a relatively new technology. From the sixties food irradiation has been applied more and more, so that the consumer movement has become alert to this technology. Since then a lot of controversies have arisen in the literature about wholesomeness, safety, effects, etc. Food irradiation is currently permitted on a small scale in about 30 countries; in some countries or states food irradiation has been put under a ban (e.g. Australia, New Zealand, New Jersey). The World Health Organization (WHO) and the Food and Agriculture Organization of the United Nations (FAO) have, however, chosen food irradiation as a safe and sound method for preserving and improving the safety of food. Reactions on the part of the consumer organizations of many countries are however not in favour of or are even opposed to food irradiation. In this chapter consumer acceptance related to technological developments is described, then the convergence of the consumer movement on public opinion and concern on food irradiation is discussed. The need for labelling of irradiated food products is discussed and finally recommendations are given of ways to change consumers attitudes to food irradiation. (author)

  12. Maps and plans reliability in tourism activities

    Directory of Open Access Journals (Sweden)

    Олександр Донцов

    2016-10-01

    Full Text Available The paper is devoted to creation of an effective system of mapping at all levels of tourist-excursion functioning that will boost the promotion of tourist product in a domestic and foreign tourist market. The State Scientific - Production Enterprise «Kartographia» actively participates in cartographic tourism provision by producing travel pieces, survey, large-scale, route maps, atlases, travel guides, city plans. They produce maps covering different content of the territory of Ukraine, its individual regions, cities interested in tourist excursions. The list and scope of cartographic products has been prepared for publication and released for the last five years. The development of new types of tourism encourages publishers to create various cartographic products for the needs of tourists guaranteeing high accuracy, reliability of information, ease of use. A variety of scientific and practical problems in tourism and excursion activities that are solved using maps and plans makes it difficult to determine the criteria for assessing their reliability. The author proposes to introduce the concept of «relevance» - as maps suitability to solving specific problems. The basis of the peer review is suitability of maps for the objective results release criteria: appropriateness of the target maps tasks (area, theme, destination; accuracy of given parameters (projection, scale, height interval; year according to the shooting of location or mapping; selection methods, methods of results measurement processing algorithm; availability of assistive devices (instrumentation, computer technology, simulation devices. These criteria provide the reliability and accuracy of the result as acceptable to consumers as possible. The author proposes a set of measures aimed at improving the content, quality and reliability of cartographic production.

  13. Reliability of Oronasal Fistula Classification.

    Science.gov (United States)

    Sitzman, Thomas J; Allori, Alexander C; Matic, Damir B; Beals, Stephen P; Fisher, David M; Samson, Thomas D; Marcus, Jeffrey R; Tse, Raymond W

    2018-01-01

    Objective Oronasal fistula is an important complication of cleft palate repair that is frequently used to evaluate surgical quality, yet reliability of fistula classification has never been examined. The objective of this study was to determine the reliability of oronasal fistula classification both within individual surgeons and between multiple surgeons. Design Using intraoral photographs of children with repaired cleft palate, surgeons rated the location of palatal fistulae using the Pittsburgh Fistula Classification System. Intrarater and interrater reliability scores were calculated for each region of the palate. Participants Eight cleft surgeons rated photographs obtained from 29 children. Results Within individual surgeons reliability for each region of the Pittsburgh classification ranged from moderate to almost perfect (κ = .60-.96). By contrast, reliability between surgeons was lower, ranging from fair to substantial (κ = .23-.70). Between-surgeon reliability was lowest for the junction of the soft and hard palates (κ = .23). Within-surgeon and between-surgeon reliability were almost perfect for the more general classification of fistula in the secondary palate (κ = .95 and κ = .83, respectively). Conclusions This is the first reliability study of fistula classification. We show that the Pittsburgh Fistula Classification System is reliable when used by an individual surgeon, but less reliable when used among multiple surgeons. Comparisons of fistula occurrence among surgeons may be subject to less bias if they use the more general classification of "presence or absence of fistula of the secondary palate" rather than the Pittsburgh Fistula Classification System.

  14. Waste Acceptance System Requirements document (WASRD)

    International Nuclear Information System (INIS)

    1993-01-01

    This Waste Acceptance System Requirements document (WA-SRD) describes the functions to be performed and the technical requirements for a Waste Acceptance System for accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) into the Civilian Radioactive Waste Management System (CRWMS). This revision of the WA-SRD addresses the requirements for the acceptance of HLW. This revision has been developed as a top priority document to permit DOE's Office of Environmental Restoration and Waste Management (EM) to commence waste qualification runs at the Savannah River Site's (SRS) Defense Waste Processing Facility (DWPF) in a timely manner. Additionally, this revision of the WA-SRD includes the requirements from the Physical System Requirements -- Accept Waste document for the acceptance of SNF. A subsequent revision will fully address requirements relative to the acceptance of SNF

  15. Acceptability of GM foods among Pakistani consumers

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-01-01

    ABSTRACT In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers. PMID:27494790

  16. Acceptability of GM foods among Pakistani consumers.

    Science.gov (United States)

    Ali, Akhter; Rahut, Dil Bahadur; Imtiaz, Muhammad

    2016-04-02

    In Pakistan majority of the consumers do not have information about genetically modified (GM) foods. In developing countries particularly in Pakistan few studies have focused on consumers' acceptability about GM foods. Using comprehensive primary dataset collected from 320 consumers in 2013 from Pakistan, this study analyzes the determinants of consumers' acceptability of GM foods. The data was analyzed by employing the bivariate probit model and censored least absolute deviation (CLAD) models. The empirical results indicated that urban consumers are more aware of GM foods compared to rural consumers. The acceptance of GM foods was more among females' consumers as compared to male consumers. In addition, the older consumers were more willing to accept GM food compared to young consumers. The acceptability of GM foods was also higher among wealthier households. Low price is the key factor leading to the acceptability of GM foods. The acceptability of the GM foods also reduces the risks among Pakistani consumers.

  17. Dependent systems reliability estimation by structural reliability approach

    DEFF Research Database (Denmark)

    Kostandyan, Erik; Sørensen, John Dalsgaard

    2014-01-01

    Estimation of system reliability by classical system reliability methods generally assumes that the components are statistically independent, thus limiting its applicability in many practical situations. A method is proposed for estimation of the system reliability with dependent components, where...... the leading failure mechanism(s) is described by physics of failure model(s). The proposed method is based on structural reliability techniques and accounts for both statistical and failure effect correlations. It is assumed that failure of any component is due to increasing damage (fatigue phenomena...... identification. Application of the proposed method can be found in many real world systems....

  18. Kant's universal law formula revisited

    NARCIS (Netherlands)

    Nyholm, S.

    2015-01-01

    Kantians are increasingly deserting the universal law formula in favor of the humanity formula. The former, they argue, is open to various decisive objections; the two are not equivalent; and it is only by appealing to the human- ity formula that Kant can reliably generate substantive implications

  19. Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

    International Nuclear Information System (INIS)

    Cho, SeongKyung; Choi, Seungho; Yoon, Hana; Song, Jiyeon

    2015-01-01

    In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur

  20. Feasibility Study on the Development of Index that Shows Social and Cultural Acceptance of Nuclear Power

    Energy Technology Data Exchange (ETDEWEB)

    Cho, SeongKyung [Bangmok College of General Education at Myongji Univ., Yongin (Korea, Republic of); Choi, Seungho; Yoon, Hana; Song, Jiyeon [Domo Brodeur, Seoul (Korea, Republic of)

    2015-05-15

    In this context, it is necessary to manage and develop an index that can measure the level of public acceptance by establishing the terms of social/cultural public acceptance of nuclear power in a practical manner and by identifying influential factors of public acceptance. Developing an index itself is not intended to increase the public acceptance of nuclear power. This study intends to contribute to determining energy policy acceptable to the public by estimating the level of potential social conflicts related to nuclear power policies with eligible evaluation criteria on social/cultural acceptance and by reducing relevant social costs. Key conclusions and proposal of this research are as follows. First, the influential factors of acceptance are reliability of nuclear safety, risk perception of nuclear power and beneficial perception of nuclear power. Among them, reliability of nuclear safety appears to have the most influence. In addition, benefit perception of nuclear power at the social level is significantly higher than that at the individual level. However, in relation to risk perception, a gap between experts and the public is found as nuclear industry premises that accident does not occur while the public premises that accident may occur.

  1. Universities and Corporate Social Responsibility Performance: An ...

    African Journals Online (AJOL)

    Toshiba

    CSR universities can pay attention to; these areas are: economic responsibility, ... The idea or thinking of corporate social ... commonly accepted that a good reputation can create a strong competitive advantage ...... Universalities also need to take into consideration philanthropic ..... Critical Perspectives on Accounting. Vol.

  2. Our Universe

    Science.gov (United States)

    Stern, Alan

    2001-03-01

    The Universe in which we live is unimaginably vast and ancient, with countless star systems, galaxies, and extraordinary phenomena such as black holes, dark matter, and gamma ray bursts. What phenomena remain mysteries, even to seasoned scientists? Our Universe is a fascinating collection of essays by some of the world's foremost astrophysicists. Some are theorists, some computational modelers, some observers, but all offer their insights into the most cutting-edge, difficult, and curious aspects of astrophysics. Compiled, the essays describe more than the latest techniques and findings. Each of the ten contributors offers a more personal perspective on their work, revealing what motivates them and how their careers and lives have been shaped by their desire to understand our universe. S. Alan Stern is Director of the Department of Space Studies at Southwest Research Institute in Boulder, Colorado. He is a planetary scientist and astrophysicist with both observational and theoretical interests. Stern is an avid pilot and a principal investigator in NASA's planetary research program, and he was selected to be a NASA space shuttle mission specialist finalist. He is the author of more than 100 papers and popular articles. His most recent book is Pluto & Charon (Wiley, 1997). Contributors: Dr. John Huchra, Harvard University Dr. Esther Hu, University of Hawaii, Honolulu Dr. John Mather, NASA Goddard Space Flight Center Dr. Nick Gnedin, University of Colorado, Boulder Dr. Doug Richstone, University of Michigan, Ann Arbor Dr. Bohdan Paczynski, Princeton University, NJ Dr. Megan Donahue, Space Telescope Science Institute, Baltimore, MD Dr. Jerry Ostriker, Princeton University, New Jersey G. Bothun, University of Oregon, Eugene

  3. Reliability of reactor materials

    International Nuclear Information System (INIS)

    Toerroenen, K.; Aho-Mantila, I.

    1986-05-01

    This report is the final technical report of the fracture mechanics part of the Reliability of Reactor Materials Programme, which was carried out at the Technical Research Centre of Finland (VTT) through the years 1981 to 1983. Research and development work was carried out in five major areas, viz. statistical treatment and modelling of cleavage fracture, crack arrest, ductile fracture, instrumented impact testing as well as comparison of numerical and experimental elastic-plastic fracture mechanics. In the area of cleavage fracture the critical variables affecting the fracture of steels are considered in the frames of a statistical model, so called WST-model. Comparison of fracture toughness values predicted by the model and corresponding experimental values shows excellent agreement for a variety of microstructures. different posibilities for using the model are discussed. The development work in the area of crack arrest testing was concentrated in the crack starter properties, test arrangement and computer control. A computerized elastic-plastic fracture testing method with a variety of test specimen geometries in a large temperature range was developed for a routine stage. Ductile fracture characteristics of reactor pressure vessel steel A533B and comparable weld material are given. The features of a new, patented instrumented impact tester are described. Experimental and theoretical comparisons between the new and conventional testers indicated clearly the improvements achieved with the new tester. A comparison of numerical and experimental elastic-plastic fracture mechanics capabilities at VTT was carried out. The comparison consisted of two-dimensional linear elastic as well as elastic-plastic finite element analysis of four specimen geometries and equivalent experimental tests. (author)

  4. Reliability modeling and analysis of smart power systems

    CERN Document Server

    Karki, Rajesh; Verma, Ajit Kumar

    2014-01-01

    The volume presents the research work in understanding, modeling and quantifying the risks associated with different ways of implementing smart grid technology in power systems in order to plan and operate a modern power system with an acceptable level of reliability. Power systems throughout the world are undergoing significant changes creating new challenges to system planning and operation in order to provide reliable and efficient use of electrical energy. The appropriate use of smart grid technology is an important drive in mitigating these problems and requires considerable research acti

  5. Field reliability of electronic systems

    International Nuclear Information System (INIS)

    Elm, T.

    1984-02-01

    This report investigates, through several examples from the field, the reliability of electronic units in a broader sense. That is, it treats not just random parts failure, but also inadequate reliability design and (externally and internally) induced failures. The report is not meant to be merely an indication of the state of the art for the reliability prediction methods we know, but also as a contribution to the investigation of man-machine interplay in the operation and repair of electronic equipment. The report firmly links electronics reliability to safety and risk analyses approaches with a broader, system oriented view of reliability prediction and with postfailure stress analysis. It is intended to reveal, in a qualitative manner, the existence of symptom and cause patterns. It provides a background for further investigations to identify the detailed mechanisms of the faults and the remedical actions and precautions for achieving cost effective reliability. (author)

  6. Reliability Assessment Of Wind Turbines

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard

    2014-01-01

    Reduction of cost of energy for wind turbines are very important in order to make wind energy competitive compared to other energy sources. Therefore the turbine components should be designed to have sufficient reliability but also not be too costly (and safe). This paper presents models...... for uncertainty modeling and reliability assessment of especially the structural components such as tower, blades, substructure and foundation. But since the function of a wind turbine is highly dependent on many electrical and mechanical components as well as a control system also reliability aspects...... of these components are discussed and it is described how there reliability influences the reliability of the structural components. Two illustrative examples are presented considering uncertainty modeling, reliability assessment and calibration of partial safety factors for structural wind turbine components exposed...

  7. Reliability engineering theory and practice

    CERN Document Server

    Birolini, Alessandro

    2014-01-01

    This book shows how to build in, evaluate, and demonstrate reliability and availability of components, equipment, systems. It presents the state-of-theart of reliability engineering, both in theory and practice, and is based on the author's more than 30 years experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The structure of the book allows rapid access to practical results. This final edition extend and replace all previous editions. New are, in particular, a strategy to mitigate incomplete coverage, a comprehensive introduction to human reliability with design guidelines and new models, and a refinement of reliability allocation, design guidelines for maintainability, and concepts related to regenerative stochastic processes. The set of problems for homework has been extended. Methods & tools are given in a way that they can be tailored to cover different reliability requirement levels and be used for safety analysis. Because of the Appendice...

  8. Reliability of Wireless Sensor Networks

    Science.gov (United States)

    Dâmaso, Antônio; Rosa, Nelson; Maciel, Paulo

    2014-01-01

    Wireless Sensor Networks (WSNs) consist of hundreds or thousands of sensor nodes with limited processing, storage, and battery capabilities. There are several strategies to reduce the power consumption of WSN nodes (by increasing the network lifetime) and increase the reliability of the network (by improving the WSN Quality of Service). However, there is an inherent conflict between power consumption and reliability: an increase in reliability usually leads to an increase in power consumption. For example, routing algorithms can send the same packet though different paths (multipath strategy), which it is important for reliability, but they significantly increase the WSN power consumption. In this context, this paper proposes a model for evaluating the reliability of WSNs considering the battery level as a key factor. Moreover, this model is based on routing algorithms used by WSNs. In order to evaluate the proposed models, three scenarios were considered to show the impact of the power consumption on the reliability of WSNs. PMID:25157553

  9. Degrees of Truthfulness in Accepted Scientific Claims.

    Directory of Open Access Journals (Sweden)

    Ahmed Hassan Mabrouk

    2008-12-01

    Full Text Available Normal 0 false false false EN-MY X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Abstract: Sciences adopt different methodologies in deriving claims and establishing theories. As a result, two accepted claims or theories belonging to two different sciences may not necessarily carry the same degree of truthfulness. Examining the different methodologies of deriving claims in the sciences of ʿaqīdah (Islamic Creed, fiqh (Islamic Jurisprudence and physics, the study shows that ʿaqīdah provides a holistic understanding of the universe. Physics falls short of interpreting physical phenomena unless these phenomena are looked at through the ʿaqīdah holistic view. Left to itself, error may creep into laws of physics due to the methodology of conducting the physical experiments, misinterpreting the experimental results, or accepting invalid assumptions. As for fiqh, it is found that apart from apparent errors, fiqh views cannot be falsified. It is, therefore, useful to consider ʿaqīdah as a master science which would permit all other sciences to live in harmony.

  10. Physical system requirements - Accept waste

    International Nuclear Information System (INIS)

    1992-08-01

    The Nuclear Waste Policy Act (NWPA) assigned to the Department of Energy (DOE) the responsibility for managing the disposal of spent nuclear fuel and high-level radioactive waste and established the Office of Civilian Radioactive Waste Management (OCRWM) for that purpose. The Secretary of Energy, in his November 1989 report to Congress (DOE/RW-0247), announced new initiatives for the conduct of the Civilian Radioactive Waste Management (CRWM) program. One of these initiatives was to establish improved management structure and procedures. In response, OCRWM performed a management study and the OCRWM Director subsequently issued the Management Systems improvement Strategy (MSIS) on August 10, 1990, calling for a rigorous implementation of systems engineering principles with a special emphasis on functional analysis. The functional analysis approach establishes a framework for integrating the program management efforts with the technical requirements analysis into a single, unified, and consistent program. This approach recognizes that just as the facilities and equipment comprising the physical waste management system must perform certain functions, so must certain programmatic and management functions be performed within the program in order to successfully bring the physical system into being. Thus, a comprehensive functional analysis effort has been undertaken which is intended to: Identify the functions that must be performed to fulfill the waste disposal mission; Identify the corresponding requirements imposed on each of the functions; and Identify the conceptual architecture that will be used to satisfy the requirements. The principal purpose of this requirements document is to present the results that were obtained from the conduct of a functional analysis effort for the Accept Waste mission

  11. The value of service reliability

    OpenAIRE

    Benezech , Vincent; Coulombel , Nicolas

    2013-01-01

    International audience; This paper studies the impact of service frequency and reliability on the choice of departure time and the travel cost of transit users. When the user has (α, β, γ) scheduling preferences, we show that the optimal head start decreases with service reliability, as expected. It does not necessarily decrease with service frequency, however. We derive the value of service headway (VoSH) and the value of service reliability (VoSR), which measure the marginal effect on the e...

  12. Distribution-Independent Reliable Learning

    OpenAIRE

    Kanade, Varun; Thaler, Justin

    2014-01-01

    We study several questions in the reliable agnostic learning framework of Kalai et al. (2009), which captures learning tasks in which one type of error is costlier than others. A positive reliable classifier is one that makes no false positive errors. The goal in the positive reliable agnostic framework is to output a hypothesis with the following properties: (i) its false positive error rate is at most $\\epsilon$, (ii) its false negative error rate is at most $\\epsilon$ more than that of the...

  13. RTE - 2015 Reliability Report. Summary

    International Nuclear Information System (INIS)

    2016-01-01

    Every year, RTE produces a reliability report for the past year. This report includes a number of results from previous years so that year-to-year comparisons can be drawn and long-term trends analysed. The 2015 report underlines the major factors that have impacted on the reliability of the electrical power system, without focusing exclusively on Significant System Events (ESS). It describes various factors which contribute to present and future reliability and the numerous actions implemented by RTE to ensure reliability today and in the future, as well as the ways in which the various parties involved in the electrical power system interact across the whole European interconnected network

  14. Survey of the possibilities to maintain correct measurements through increased reliability of components or through ''operational fault perceptibility''

    International Nuclear Information System (INIS)

    Volkmann, C.U.

    1982-12-01

    Tests and requirements for the pattern approval of mechanical weighing machines are based on long-term experience and detailed regulations, whereas equivalent treatment of electronic devices of weighing machines is a new kind of task. In this field experience is still scarce, and regulations are lacking. While there is some unanimity that the sensitivity of electronic devices to any kind of electromagnetic interferences has to be judged on the grounds of some tests, there is no universally accepted guideline as to how to assure, over a few weeks of pattern approval tests, the measuring stability for a period of years. Two major concepts are being followed to this end: increased reliability of components and ''operational fault perceptibility (OFP)''. After some remarks concerning the terminology to be used, both concepts are discussed and eventually compared. (orig.)

  15. Software reliability for safety-critical applications

    International Nuclear Information System (INIS)

    Everett, B.; Musa, J.

    1994-01-01

    In this talk, the authors address the question open-quotes Can Software Reliability Engineering measurement and modeling techniques be applied to safety-critical applications?close quotes Quantitative techniques have long been applied in engineering hardware components of safety-critical applications. The authors have seen a growing acceptance and use of quantitative techniques in engineering software systems but a continuing reluctance in using such techniques in safety-critical applications. The general case posed against using quantitative techniques for software components runs along the following lines: safety-critical applications should be engineered such that catastrophic failures occur less frequently than one in a billion hours of operation; current software measurement/modeling techniques rely on using failure history data collected during testing; one would have to accumulate over a billion operational hours to verify failure rate objectives of about one per billion hours

  16. Reliability of non-destructive testing methods

    International Nuclear Information System (INIS)

    Broekhoven, M.J.G.

    1988-01-01

    This contribution regards the results of an evaluation of the reliability of radiography (X-rays and gamma-rays), manual-, and mechanized/automated ultrasonic examination by generally accepted codes/rules, with respect to detection, characterization and sizing/localization of defects. The evaluation is based on the results of examinations, by a number of teams, of 30 test plates, 30 and 50 mm thickness, containing V,U, X and K-shaped welds each containing several types of imperfections (211) in total) typical for steel arc fusion welding, such as porosity, inclusions, lack of fusion or penetration and cracks. Besides, some results are presented obtained from research on advanced UT-techniques, viz. the time-of-flight-diffraction and flaw-tip deflection technique. (author)

  17. Human reliability in probabilistic safety assessments

    International Nuclear Information System (INIS)

    Nunez Mendez, J.

    1989-01-01

    Nowadays a growing interest in medioambiental aspects is detected in our country. It implies an assessment of the risk involved in the industrial processess and installations in order to determine if those are into the acceptable limits. In these safety assessments, among which PSA (Probabilistic Safety Assessments), can be pointed out the role played by the human being in the system is one of the more relevant subjects. (This relevance has been demostrated in the accidents happenned). However in Spain there aren't manuals specifically dedicated to asses the human contribution to risk in the frame of PSAs. This report aims to improve this situation providing: a) a theoretical background to help the reader in the understanding of the nature of the human error, b) a guide to carry out a Human Reliability Analysis and c) a selected overwiev of the techniques and methodologies currently applied in this area. (Author)

  18. Human Reliability in Probabilistic Safety Assessments

    International Nuclear Information System (INIS)

    Nunez Mendez, J.

    1989-01-01

    Nowadays a growing interest in environmental aspects is detected in our country. It implies an assessment of the risk involved in the industrial processes and installations in order to determine if those are into the acceptable limits. In these safety assessments, among which PSA (Probabilistic Safety Assessments), can be pointed out the role played by the human being in the system is one of the more relevant subjects (This relevance has been demonstrated in the accidents happened) . However, in Spain there aren't manuals specifically dedicated to asses the human contribution to risk in the frame of PSAs. This report aims to improve this situation providing: a) a theoretical background to help the reader in the understanding of the nature of the human error, b) a quid to carry out a Human Reliability Analysis and c) a selected overview of the techniques and methodologies currently applied in this area. (Author) 20 refs

  19. Reliability of non-destructive testing methods

    Energy Technology Data Exchange (ETDEWEB)

    Broekhoven, M J.G. [Ministry of Social Affairs, (Netherlands)

    1988-12-31

    This contribution regards the results of an evaluation of the reliability of radiography (X-rays and gamma-rays), manual-, and mechanized/automated ultrasonic examination by generally accepted codes/rules, with respect to detection, characterization and sizing/localization of defects. The evaluation is based on the results of examinations, by a number of teams, of 30 test plates, 30 and 50 mm thickness, containing V,U, X and K-shaped welds each containing several types of imperfections (211) in total) typical for steel arc fusion welding, such as porosity, inclusions, lack of fusion or penetration and cracks. Besides, some results are presented obtained from research on advanced UT-techniques, viz. the time-of-flight-diffraction and flaw-tip deflection technique. (author). 4 refs.

  20. Standardizing the practice of human reliability analysis

    International Nuclear Information System (INIS)

    Hallbert, B.P.

    1993-01-01

    The practice of human reliability analysis (HRA) within the nuclear industry varies greatly in terms of posited mechanisms that shape human performance, methods of characterizing and analytically modeling human behavior, and the techniques that are employed to estimate the frequency with which human error occurs. This variation has been a source of contention among HRA practitioners regarding the validity of results obtained from different HRA methods. It has also resulted in attempts to develop standard methods and procedures for conducting HRAs. For many of the same reasons, the practice of HRA has not been standardized or has been standardized only to the extent that individual analysts have developed heuristics and consistent approaches in their practice of HRA. From the standpoint of consumers and regulators, this has resulted in a lack of clear acceptance criteria for the assumptions, modeling, and quantification of human errors in probabilistic risk assessments

  1. Intelligent Universe

    Energy Technology Data Exchange (ETDEWEB)

    Hoyle, F

    1983-01-01

    The subject is covered in chapters, entitled: chance and the universe (synthesis of proteins; the primordial soup); the gospel according to Darwin (discussion of Darwin theory of evolution); life did not originate on earth (fossils from space; life in space); the interstellar connection (living dust between the stars; bacteria in space falling to the earth; interplanetary dust); evolution by cosmic control (microorganisms; genetics); why aren't the others here (a cosmic origin of life); after the big bang (big bang and steady state); the information rich universe; what is intelligence up to; the intelligent universe.

  2. Reliability And Maintainability Issues for the Next Linear Collider

    International Nuclear Information System (INIS)

    Wilson, Zane J.; Gold, Saul L.; Koontz, Ron F.; Lavine, Ted L.

    2011-01-01

    Large accelerators for high energy physics research traditionally have been designed using informal best design, engineering, and management practices to achieve acceptable levels of operational availability. However, the Next Linear Collider(NLC) project presents a particular challenge for operational availability due to the unprecedented size and complexity of the accelerator systems required to achieve the physics goals of high center-of-mass energy and high luminosity. Formal reliability and maintainability analysis, design, and implementation will be required to achieve acceptable operational availability for the high energy physics research program. This paper introduces some of the basic concepts of reliability analysis and applies them to the 2.6-cm microwave power system of the two 10-km-long, 250-GeV linacs that are currently proposed for the NLC design.

  3. Reliability of four experimental mechanical pain tests in children

    Directory of Open Access Journals (Sweden)

    Soee AL

    2013-02-01

    Full Text Available Ann-Britt L Soee,1 Lise L Thomsen,2 Birte Tornoe,1,3 Liselotte Skov11Department of Pediatrics, Children’s Headache Clinic, Copenhagen University Hospital Herlev, Copenhagen, Denmark; 2Department of Neuropediatrics, Juliane Marie Centre, Copenhagen University Hospital Rigshospitalet, København Ø, Denmark; 3Department of Physiotherapy, Medical Department O, Copenhagen University Hospital Herlev, Herlev, DenmarkPurpose: In order to study pain in children, it is necessary to determine whether pain measurement tools used in adults are reliable measurements in children. The aim of this study was to explore the intrasession reliability of pressure pain thresholds (PPT in healthy children. Furthermore, the aim was also to study the intersession reliability of the following four tests: (1 Total Tenderness Score; (2 PPT; (3 Visual Analog Scale score at suprapressure pain threshold; and (4 area under the curve (stimulus–response functions for pressure versus pain.Participants and methods: Twenty-five healthy school children, 8–14 years of age, participated. Test 2, PPT, was repeated three times at 2 minute intervals on the same day to estimate PPT intrasession reliability using Cronbach’s alpha. Tests 1–4 were repeated after median 21 (interquartile range 10.5–22 days, and Pearson’s correlation coefficient was used to describe the intersession reliability.Results: The PPT test was precise and reliable (Cronbach’s alpha ≥ 0.92. All tests showed a good to excellent correlation between days (intersessions r = 0.66–0.81. There were no indications of significant systematic differences found in any of the four tests between days.Conclusion: All tests seemed to be reliable measurements in pain evaluation in healthy children aged 8–14 years. Given the small sample size, this conclusion needs to be confirmed in future studies.Keywords: repeatability, intraindividual reliability, pressure pain threshold, pain measurement, algometer

  4. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events: consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed

  5. Probabilistic relationships in acceptable risk studies

    International Nuclear Information System (INIS)

    Benjamin, J.R.

    1977-01-01

    Acceptable risk studies involve uncertainties in future events; consequences and associated values, the acceptability levels, and the future decision environment. Probabilistic procedures afford the basic analytical tool to study the influence of each of these parameters on the acceptable risk decision, including their interrelationships, and combinations. A series of examples are presented in the paper in increasing complexity to illustrate the principles involved and to quantify the relationships to the acceptable risk decision. The basic objective of such studies is to broaden the scientific basis of acceptable risk decision making. It is shown that rationality and consistency in decision making is facilitated by such studies and that rather simple relationships exist in many situations of interest. The variation in criteria associated with an increase in the state of knowledge or change in the level of acceptability is also discussed. (Auth.)

  6. OTM Machine Acceptance: In the Arab Culture

    Science.gov (United States)

    Rashed, Abdullah; Santos, Henrique

    Basically, neglecting the human factor is one of the main reasons for system failures or for technology rejection, even when important technologies are considered. Biometrics mostly have the characteristics needed for effortless acceptance, such as easiness and usefulness, that are essential pillars of acceptance models such as TAM (technology acceptance model). However, it should be investigated. Many studies have been carried out to research the issues of technology acceptance in different cultures, especially the western culture. Arabic culture lacks these types of studies with few publications in this field. This paper introduces a new biometric interface for ATM machines. This interface depends on a promising biometrics which is odour. To discover the acceptance of this biometrics, we distributed a questionnaire via a web site and called for participation in the Arab Area and found that most respondents would accept to use odour.

  7. Nuclear law and public acceptance

    International Nuclear Information System (INIS)

    Muguet, Tania Mara F.

    2009-01-01

    After the fission of the atom and its use for military purposes, the imposition of controls and restrictions to prevent the proliferation of atomic weapons was established and led to the drafting of a series of international conventions to promote the harmonization of domestic legislation. In this context, to provide a legal framework for conducting activities related to nuclear energy and ionizing radiation, in a manner that adequately protects individuals, property and environment, the nuclear energy law was created and widely adopted. To better control the risks associated with the use of nuclear energy and in order to adapt its technological developments in constant state of evolution, a growing body of international law of nuclear energy is emerging from instruments (universal, regional, bilateral and multilateral) to impose obligation in the use of the technology. In sum, changes in technological, economic, political or social conditions created the need for legal solutions and the public understanding and confidence in the peaceful uses of nuclear energy requires extensive information to be made available on the risks and benefits to stakeholders (effected public, press, media, and legislators etc.). (author)

  8. Nuclear law and public acceptance

    Energy Technology Data Exchange (ETDEWEB)

    Muguet, Tania Mara F. [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao Geral de Assuntos Internacionais], e-mail: tmuguet@cnen.gov.br

    2009-07-01

    After the fission of the atom and its use for military purposes, the imposition of controls and restrictions to prevent the proliferation of atomic weapons was established and led to the drafting of a series of international conventions to promote the harmonization of domestic legislation. In this context, to provide a legal framework for conducting activities related to nuclear energy and ionizing radiation, in a manner that adequately protects individuals, property and environment, the nuclear energy law was created and widely adopted. To better control the risks associated with the use of nuclear energy and in order to adapt its technological developments in constant state of evolution, a growing body of international law of nuclear energy is emerging from instruments (universal, regional, bilateral and multilateral) to impose obligation in the use of the technology. In sum, changes in technological, economic, political or social conditions created the need for legal solutions and the public understanding and confidence in the peaceful uses of nuclear energy requires extensive information to be made available on the risks and benefits to stakeholders (effected public, press, media, and legislators etc.). (author)

  9. Reliability and validity of the Wolfram Unified Rating Scale (WURS

    Directory of Open Access Journals (Sweden)

    Nguyen Chau

    2012-11-01

    Full Text Available Abstract Background Wolfram syndrome (WFS is a rare, neurodegenerative disease that typically presents with childhood onset insulin dependent diabetes mellitus, followed by optic atrophy, diabetes insipidus, deafness, and neurological and psychiatric dysfunction. There is no cure for the disease, but recent advances in research have improved understanding of the disease course. Measuring disease severity and progression with reliable and validated tools is a prerequisite for clinical trials of any new intervention for neurodegenerative conditions. To this end, we developed the Wolfram Unified Rating Scale (WURS to measure the severity and individual variability of WFS symptoms. The aim of this study is to develop and test the reliability and validity of the Wolfram Unified Rating Scale (WURS. Methods A rating scale of disease severity in WFS was developed by modifying a standardized assessment for another neurodegenerative condition (Batten disease. WFS experts scored the representativeness of WURS items for the disease. The WURS was administered to 13 individuals with WFS (6-25 years of age. Motor, balance, mood and quality of life were also evaluated with standard instruments. Inter-rater reliability, internal consistency reliability, concurrent, predictive and content validity of the WURS were calculated. Results The WURS had high inter-rater reliability (ICCs>.93, moderate to high internal consistency reliability (Cronbach’s α = 0.78-0.91 and demonstrated good concurrent and predictive validity. There were significant correlations between the WURS Physical Assessment and motor and balance tests (rs>.67, ps>.76, ps=-.86, p=.001. The WURS demonstrated acceptable content validity (Scale-Content Validity Index=0.83. Conclusions These preliminary findings demonstrate that the WURS has acceptable reliability and validity and captures individual differences in disease severity in children and young adults with WFS.

  10. 2013 SYR Accepted Poster Abstracts.

    Science.gov (United States)

    2013-01-01

    SYR 2013 Accepted Poster abstracts: 1. Benefits of Yoga as a Wellness Practice in a Veterans Affairs (VA) Health Care Setting: If You Build It, Will They Come? 2. Yoga-based Psychotherapy Group With Urban Youth Exposed to Trauma. 3. Embodied Health: The Effects of a Mind�Body Course for Medical Students. 4. Interoceptive Awareness and Vegetable Intake After a Yoga and Stress Management Intervention. 5. Yoga Reduces Performance Anxiety in Adolescent Musicians. 6. Designing and Implementing a Therapeutic Yoga Program for Older Women With Knee Osteoarthritis. 7. Yoga and Life Skills Eating Disorder Prevention Among 5th Grade Females: A Controlled Trial. 8. A Randomized, Controlled Trial Comparing the Impact of Yoga and Physical Education on the Emotional and Behavioral Functioning of Middle School Children. 9. Feasibility of a Multisite, Community based Randomized Study of Yoga and Wellness Education for Women With Breast Cancer Undergoing Chemotherapy. 10. A Delphi Study for the Development of Protocol Guidelines for Yoga Interventions in Mental Health. 11. Impact Investigation of Breathwalk Daily Practice: Canada�India Collaborative Study. 12. Yoga Improves Distress, Fatigue, and Insomnia in Older Veteran Cancer Survivors: Results of a Pilot Study. 13. Assessment of Kundalini Mantra and Meditation as an Adjunctive Treatment With Mental Health Consumers. 14. Kundalini Yoga Therapy Versus Cognitive Behavior Therapy for Generalized Anxiety Disorder and Co-Occurring Mood Disorder. 15. Baseline Differences in Women Versus Men Initiating Yoga Programs to Aid Smoking Cessation: Quitting in Balance Versus QuitStrong. 16. Pranayam Practice: Impact on Focus and Everyday Life of Work and Relationships. 17. Participation in a Tailored Yoga Program is Associated With Improved Physical Health in Persons With Arthritis. 18. Effects of Yoga on Blood Pressure: Systematic Review and Meta-analysis. 19. A Quasi-experimental Trial of a Yoga based Intervention to Reduce Stress and

  11. Psychological flexibility of nurses in a cancer hospital: Preliminary validation of a chinese version of the work-related acceptance and action questionnaire

    Directory of Open Access Journals (Sweden)

    Xianghua Xu

    2018-01-01

    Full Text Available Objective: To translate the English work-related acceptance and action questionnaire (WAAQ, make cross-cultural adaptations, and examine its psychometric properties when used by Chinese oncology nurses. Methods: After translation, the psychometric properties of the Chinese WAAQ were analyzed among 417 nurses, and content validity was determined by six experts. Results: Item-level content validity index (CVI values were between 0.83 and 1.00; scale-level CVI/universal agreement (S-CVI/UA and S-CVI/average were 0.86 and 0.98, respectively, which implicated a good content validity. The correlation of the Chinese WAAQ with AAQ-II (rs= −0.247, P < 0.001 suggested criterion validity, and those with General Health Questionnaire-12 (−0.250, <0.001 and general self-efficacy scale (0.491, <0.001 and Utrecht work engagement scale (UWES (0.439, <0.001 suggested convergent validity. Exploratory factor analysis identified a seven-item, one-factor structure of WAAQ. The Chinese version of WAAQ had high internal consistency (Cronbach's α = 0.920, with an item-total correlation coefficient of 0.702–0.828 (P < 0.05, split-half reliability of 0.933, and test-retest reliability of 0.772. Conclusions: The Chinese WAAQ is a reliable and valid tool for assessing psychological flexibility in Chinese oncology nurses.

  12. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  13. Understanding Retailers’ Acceptance of Virtual Stores

    OpenAIRE

    Irene Y.L. Chen

    2010-01-01

    The acceptance of e-commerce among consumers has stimulated the rise of virtual stores. Increasing traditional retailers or people who do not have sufficient capital for maintaining a brick-and-mortar store have considered using virtual stores to reach global market. In the e-commerce literature, there has been rich research evidence concerning consumers’ acceptance of virtual stores. However, rigorous academic research on retailers’ acceptance of virtual stores is relatively scarce today. Th...

  14. USAID University

    Data.gov (United States)

    US Agency for International Development — USAID University is USAID's learning management system. Features include 1) Access online courses 2) Register for instructor-led courses 3)Access your student...

  15. Runaway universe

    Energy Technology Data Exchange (ETDEWEB)

    Davies, P

    1978-01-01

    The subject is covered in chapters entitled: the emerging universe (general introduction, history of astronomical and cosmological research, origins, the expanding universe, stars, galaxies, electromagnetic radiation); primeval fire (the big bang model, origin of the elements, properties of the elements and of sub-atomic particles); order out of chaos (galactic evolution, star formation, nuclear fusion, the solar system, origin of life on Earth); a star called Sol (properties of the sun and of other stars); life in the universe; the catastrophe principle (the rise and fall of cosmic order); stardoom (star evolution, neutron stars); black holes and superholes (gravitational collapse); technology and survival; the dying universe (second law of thermodynamics); worlds without end (cosmological models).

  16. Rhodes University

    African Journals Online (AJOL)

    Samridhi Sharma

    2013-10-29

    Oct 29, 2013 ... been taken may improve the reception, by the target audience, of the intended communication. This may ... alcohol marketing. Similarly .... of the intended users (Rhodes University support staff ..... Digital Human Modeling and.

  17. Reliability Analysis of Public Survey in Satisfaction with Nuclear Safety

    Energy Technology Data Exchange (ETDEWEB)

    Park, Moon Soo; Moon, Joo Hyun; Kang, Chang Sun [Seoul National Univ., Seoul (Korea, Republic of)

    2005-07-01

    Korea Institute of Nuclear Safety (KINS) carried out a questionnaire survey on public's understanding nuclear safety and regulation in order to grasp public acceptance for nuclear energy. The survey was planned to help to analyze public opinion on nuclear energy and provide basic data for advertising strategy and policy development. In this study, based on results of the survey, the reliability of the survey was evaluated according to each nuclear site.

  18. On Lagrange Multipliers in Work with Quality and Reliability Assurance

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui; Becker, P.

    1986-01-01

    In optimizing some property of a system, reliability say, a designer usually has to accept certain constraints regarding cost, completion time, volume, weight, etc. The solution of optimization problems with boundary constraints can be helped substantially by the use of Lagrange multipliers...... in the areas of sales promotion and teaching. These maps illuminate the logic structure of solution sequences. One such map is shown, illustrating the application of LMT in one of the examples....

  19. Reliability Analysis of Public Survey in Satisfaction with Nuclear Safety

    International Nuclear Information System (INIS)

    Park, Moon Soo; Moon, Joo Hyun; Kang, Chang Sun

    2005-01-01

    Korea Institute of Nuclear Safety (KINS) carried out a questionnaire survey on public's understanding nuclear safety and regulation in order to grasp public acceptance for nuclear energy. The survey was planned to help to analyze public opinion on nuclear energy and provide basic data for advertising strategy and policy development. In this study, based on results of the survey, the reliability of the survey was evaluated according to each nuclear site

  20. Innovation and reliability of atomic standards for PTTI applications

    Science.gov (United States)

    Kern, R.

    1981-01-01

    Innovation and reliability in hyperfine frequency standards and clock systems are discussed. Hyperfine standards are defined as those precision frequency sources and clocks which use a hyperfine atomic transition for frequency control and which have realized significant commercial production and acceptance (cesium, hydrogen, and rubidium atoms). References to other systems such as thallium and ammonia are excluded since these atomic standards have not been commercially exploited in this country.