ICT and UD: Preliminary Study for Recommendations to Design Accessible University Courses.

Science.gov (United States)

Pagliara, Silvio Marcello; Sánchez Utgé, Marta; De Anna, Lucia

2017-01-01

Starting from the Universal Design in the educational context principles, the experiences gained during the FIRB project "Net@ccessibility" and the high-education courses for teachers' specialization on special education, this research will focus on preliminary studies in order to define the recommendations for designing accessible university courses.

Principles and Criteria for Design

DEFF Research Database (Denmark)

Beghin, D.; Cervetto, D.; Hansen, Peter Friis

1997-01-01

The mandate of ISSC Committee IV.1 on principles and Criteria for Design is to report on the following:The ongoing concern for quantification of general economic and safety criteria for marine structures and for the development of appropriate principles for rational life cycle design using...

Construction principles and design rules in the case of circular design

NARCIS (Netherlands)

Romme, A.G.L.; Endenburg, G.

2006-01-01

This paper proposes science-based organization design that uses construction principles and design rules to guide practitioner-academic projects. Organization science implies construction principles for creating and implementing designs. These principles serve to construct design rules that are

Using Persuasive Design Principles in Motivational Feeling towards Children Dental Anxiety (CDA)

Science.gov (United States)

Salam, Sobihatun Nur-Abdul; Yahaya, Wan Ahmad Jaafar-Wan; Ali, Azillah-Mohd

This paper is focusing the potential use of persuasive design principles in motivating children's dental anxiety. The main intention of the paper is to emphasize an attempt of how persuasive design principle can be designed into educational material using CD ROM based multimedia learning environment to overcome the CDA. Firstly, we describe a problem domain which discuss about the universal feeling of CDA and secondly the current practices in handling those negative feelings. Thirdly, the conceptual background of PMLE and how the principle has been applied in designing the information interfaces and presentation of a persuasive multimedia learning environment (PMLE) are described. Fourthly, an experimental design was used to validate the effects of prototype which assessed children dental anxiety level before and after the demonstration and utilization of a PMLE. Primary school children age between seven and nine years old are selected as respondents. Fifthly, the result of the study has revealed the feedback from children regarding baseline test and children dental anxiety test. It shows how by using persuasive design principles as an overall strategy in designing PMLE was able to motivate children feelings towards dental anxiety and could let the children behave in a good manner for dental visit in the future.

Developing Inclusive Teaching and Learning Through the Principles of Universal Design.

Science.gov (United States)

Knarlag, Kjetil; Olaussen, Elinor

2016-01-01

For decades, the term reasonable accommodations has been the lead strategy and praxis in addressing diversity and disabilities in Higher Education. Universal Design for Learning (UDL) is a well-known theory and a practical approach which challenges these traditions in order to improve inclusive teaching and learning in the American school system. A European funded project, UDLL, has transferred these theories to a European context, and developed best practice guidelines for key stakeholders in European Higher Education Institutions. This universal approach challenges established traditions, methods and mindsets in addressing the diverse student population.

Universal design of public open spaces

Directory of Open Access Journals (Sweden)

Petra Krajner

2008-01-01

Full Text Available Urban open spaces are public places that must assure access for all users. They should be designed for equal use despite disabilities and special recreational needs. Their design must be functional and must meet user’s special requirements, either everyday functional or special (recreational needs. It is not just about overcoming architectural obstacles by building ramps of suitable slope and size; it is about inclusive, universal landscape design of urban space made for all citizens. For this matter, different ways of public use for each group of users is defined, functional criteria are determined, and examples of good and bad design are assembled to present the differences between technically accomplished ramps, and slope paths that include quality landscape inclusive design. To prove the unsuitability of public open spaces in Ljubljana, various analyses were made, including the measurement of steepness, lengths and wideness of certain urban elements. As an application of results, the universal designing principles are summarized in new proposal for entrance into Tivoli Park.

Update heat exchanger designing principles

International Nuclear Information System (INIS)

Lipets, A.U.; Yampol'skij, A.E.

1985-01-01

Update heat exchanger design principles are analysed. Different coolant pattern in a heat exchanger are considered. It is suggested to rationally organize flow rates irregularity in it. Applying on heat exchanger designing measures on using really existing temperature and flow rate irregularities will permit to improve heat exchanger efficiency. It is expedient in some cases to artificially produce irregularities. In this connection some heat exchanger design principles must be reviewed now

Sign Redesign: Applying Design Principles to Improve Signage in an Academic Library

Directory of Open Access Journals (Sweden)

Sheila Kasperek

2014-05-01

Full Text Available When the Mansfield University library’s Special Events and Customer Service Committee created a communications plan for the library, the opportunity presented itself to overhaul the library signs. Applying basic design principles of contrast, alignment, and repetition along with standards from the Americans with Disabilities Act, the library improved the visual communications within the library. Patrons can now read signs from a distance and understand their purpose. Using common design elements, the library began presenting official library information more cohesively. Extending beyond signs, these design principles are now part of the library’s print publications and promotional items. With this consistency, the library brand is more easily recognizable both within the library and across campus. This article describes some basic elements of design and the process of redesigning the signs.

Principles for enabling deep secondary design

DEFF Research Database (Denmark)

Pries-Heje, Jan; Hansen, Magnus Rotvit Perlt

2017-01-01

design by analyzing two cases where secondary designers fundamentally change functionality, content and technology complexity level. The first case redesigns a decision model for agile development in an insurance company; the second creates a contingency model for choosing project management tools...... and techniques in a hospital. Our analysis of the two cases leads to the identification of four principles of design implementation that primary designers can apply to enable secondary design and four corresponding design implementation principles that secondary designers themselves need to apply....

Toward the elaboration of a Universal Design Protocol in the National University of Córdoba

Directory of Open Access Journals (Sweden)

Mauricio Alexei Mareño Sempertegui

2014-06-01

Full Text Available This article is aimed at expressing the main aspects of the process of administration of an Urban and Building Protocol of Accessibility based on the principles of Universal Design in the National University of Cordoba in Argentina.The main concepts that form the theoretical structure are outlined, posing the need to overcome traditional conceptions which still remain in the policies of accessibility in regional universities and which are insufficient to guide the design of a respectful intervention of fundamental rights. In this way, the concepts of disability and accessibility should be redefined from a perspective of rights.This institutional protocol has as its main objective the guidance of the design and construction of an urban and building space for this university so it can be useful for all the people in a safe, self-sufficient-unexclusive way. Thus, some essential institutional conditions are outlined to guarantee its effective implementation.

Universal Principles of Media Ethics: South African and German Perspectives

Directory of Open Access Journals (Sweden)

Lea-Sophie Borgmann

2012-11-01

Full Text Available The increasingly globalised nature of media and journalism has led to a review of ethical standards, mainly to find universal ethical values which are applicable in a world with countless different cultures. This article attempts to address this field of research in comparing South African and German approaches to the topic of media ethics. Firstly, it outlines theories of universal and specific cultural ethical principles in journalism. Secondly, it shows how the conception of universal ethical principles, so called protonorms, is interpreted differently in the two cultures and how specific cultural values of media ethics are rated among the two cultural frameworks of Germany and South Africa. An online survey conducted among German and South African journalism students found significant differences in the ranking of media ethics principles as well as similarities and differences in the interpretations of protonorms. The results support existing normative theories of universal media ethics, such as the theory of protonorms, in contributing explorative empirical data to this field of mainly theoretical research.

RFID design principles

CERN Document Server

Lehpamer, Harvey

2012-01-01

This revised edition of the Artech House bestseller, RFID Design Principles, serves as an up-to-date and comprehensive introduction to the subject. The second edition features numerous updates and brand new and expanded material on emerging topics such as the medical applications of RFID and new ethical challenges in the field. This practical book offers you a detailed understanding of RFID design essentials, key applications, and important management issues. The book explores the role of RFID technology in supply chain management, intelligent building design, transportation systems, military

Universal Design for Instruction: The Paradigm, Its Principles, and Products for Enhancing Instructional Access

Science.gov (United States)

McGuire, Joan M.; Scott, Sally S.; Shaw, Stan F.

2003-01-01

Universal Design for Instruction (UDI), a construct that serves as the foundation for the work of a federally funded project at the University of Connecticut, offers an approach to inclusive instruction that is responsive to the diverse learning needs of a changing postsecondary population. In this article elements relating to the implementation…

Universal Design for Learning and School Libraries: A Logical Partnership

Science.gov (United States)

Robinson, David E.

2017-01-01

This article will explore the basic tenets of Universal Design for Learning (UDL) in relation to collaborative curriculum development and implementation; provide a case study examination of UDL principles in action; and suggest school library curricular activities that provide opportunities for multiple means of representation, action, and…

Y-12 Sustainable Design Principles for Building Design and Construction

Energy Technology Data Exchange (ETDEWEB)

Jackson, J. G.

2008-11-01

B&W Y-12 is committed to modernizing the Y-12 complex to meet future needs with a sustainable and responsive infrastructure and to integrating sustainability principles and practices into Y-12 work (Y72-001, B&W Y-12 Environmental, Safety and Health Policy). This commitment to sustainability and specifically sustainable design of buildings is also incorporated into Presidential Executive Orders (EO), DOE Orders (DOE O), and goals. Sustainable building design is an approach to design, construct, and operate facilities in an efficient and environmentally sound manner that will produce a healthful, resource-efficient and productive working environment that is inherently protective of the environment. The DOE has established the following 5 Guiding Principles for High Performance Sustainable Building (HPSB), and has issued directives that require Y-12 to incorporate the principles and a number of supporting specific practices and techniques into building design, construction and renovation projects: (1) Employ Integrated Design Principles; (2) Optimize Energy Performance; (3) Protect and Conserve Water; (4) Enhance Indoor Environmental Quality; and (5) Reduce Environmental Impact of Materials. The purpose of this document is to present the required sustainable building principles, practices and techniques, summarize the key drivers for incorporating them into Y-12 projects, and present additional recommendations and resources that can be used to support sustainable buildings to enhance the environmental and economic performance of the Y-12 Complex.

Design Principles for Closed Loop Supply Chains

NARCIS (Netherlands)

H.R. Krikke (Harold); C.P. Pappis (Costas); G.T. Tsoulfas; J.M. Bloemhof-Ruwaard (Jacqueline)

2001-01-01

textabstractIn this paper we study design principles for closed loop supply chains. Closed loop supply chains aim at closing material flows thereby limiting emission and residual waste, but also providing customer service at low cost. We study 'traditional' and 'new' design principles known in the

General design safety principles for nuclear power plants

International Nuclear Information System (INIS)

1986-01-01

This Safety Guide provides the safety principles and the approach that have been used to implement the Code in the Safety Guides. These safety principles and the approach are tied closely to the safety analyses needed to assist the design process, and are used to verify the adequacy of nuclear power plant designs. This Guide also provides a framework for the use of other design Safety Guides. However, although it explains the principles on which the other Safety Guides are based, the requirements for specific applications of these principles are mostly found in the other Guides

The Applicability of Corporate Strategic Principles to Diversified University Campuses.

Science.gov (United States)

Brock, David M.; Harvey, William B.

1993-01-01

A discussion of the use of principles of business administration in university planning looks both at differences between businesses and universities and at broad and practical similarities, then presents a variety of corporate strategic techniques and suggests how they might be adapted to higher education. (MSE)

Game Design Principles based on Human Error

Directory of Open Access Journals (Sweden)

Guilherme Zaffari

2016-03-01

Full Text Available This paper displays the result of the authors’ research regarding to the incorporation of Human Error, through design principles, to video game design. In a general way, designers must consider Human Error factors throughout video game interface development; however, when related to its core design, adaptations are in need, since challenge is an important factor for fun and under the perspective of Human Error, challenge can be considered as a flaw in the system. The research utilized Human Error classifications, data triangulation via predictive human error analysis, and the expanded flow theory to allow the design of a set of principles in order to match the design of playful challenges with the principles of Human Error. From the results, it was possible to conclude that the application of Human Error in game design has a positive effect on player experience, allowing it to interact only with errors associated with the intended aesthetics of the game.

Five Principles for MOOC Design: With a Case Study

Directory of Open Access Journals (Sweden)

John R. Drake

2015-05-01

Full Text Available New web technologies have enabled online education to take on a massive scale, prompting many universities to create massively open online courses (MOOCs that take advantage of these technologies in a seemingly effortless manner. Designing a MOOC, however, is anything but trivial. It involves developing content, learning activities, and assessments to accommodate both the massiveness and openness of the course. To design an effective MOOC, instructors need to integrate both pedagogical and information systems theory. In this paper, we present a case study of a MOOC grant and a series of decisions made in its development. These decisions, when paired with the theoretical framework, suggest five principles – meaningful, engaging, measurable, accessible, and scalable – may be applicable to future MOOC development projects.

Design principles of metal-cutting machine tools

CERN Document Server

Koenigsberger, F

1964-01-01

Design Principles of Metal-Cutting Machine Tools discusses the fundamentals aspects of machine tool design. The book covers the design consideration of metal-cutting machine, such as static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The text first details the data calculation and the general requirements of the machine tool. Next, the book discusses the design principles, which include stiffness and rigidity of the separate constructional elements and their combined behavior under load, as well as electrical, mechanical, and hydraulic drives for the op

Theory-Generating Practice: Proposing a principle for learning design

Directory of Open Access Journals (Sweden)

Mie Buhl

2016-06-01

Full Text Available This contribution proposes a principle for learning design: Theory-Generating Practice (TGP as an alternative to the way university courses often are taught and structured with a series of theoretical lectures separate from practical experience and concluding with an exam or a project. The aim is to contribute to a development of theoretical frameworks for learning designs by suggesting TGP which may lead to new practices and turn the traditional dramaturgy for teaching upside down. TGP focuses on embodied experience prior to text reading and lectures to enhance theoretical knowledge building and takes tacit knowledge into account. The article introduces TGP and contextualizes it to a Danish tradition of didactics as well as discusses it in relation to contemporary conceptual currents of didactic design and learning design. This is followed by a theoretical framing of TGP, and is discussed through three empirical examples from bachelor and master programs involving technology, and showing three ways of practicing it.

Theory-Generating Practice: Proposing a principle for learning design

Directory of Open Access Journals (Sweden)

Mie Buhl

2016-05-01

Full Text Available This contribution proposes a principle for learning design: Theory-Generating Practice (TGP as an alternative to the way university courses often are taught and structured with a series of theoretical lectures separate from practical experience and concluding with an exam or a project. The aim is to contribute to a development of theoretical frameworks for learning designs by suggesting TGP which may lead to new practices and turn the traditional dramaturgy for teaching upside down. TGP focuses on embodied experience prior to text reading and lectures to enhance theoretical knowledge building and takes tacit knowledge into account. The article introduces TGP and contextualizes it to a Danish tradition of didactics as well as discusses it in relation to contemporary conceptual currents of didactic design and learning design. This is followed by a theoretical framing of TGP, and is discussed through three empirical examples from bachelor and master programs involving technology, and showing three ways of practicing it.

Birth of a closed universe, and the anthropogenic principle

International Nuclear Information System (INIS)

Zel'dovich, Y.

1981-01-01

A scenario is proposed for the evolution of the universe, starting with the quantum birth of a closed world at a minimum in the self-consistent de Sitter cosmological solution with vacuum polarization. The closure of the universe and the permanently supercritical value of its density follow directly from a single condition: that quantum birth take place. The perturbations must be small in order that the de Sitter phase may be sufficiently prolonged to ensure a protracted Friedmann plasma-matter expansion. Thus a universe having the properties we observe may in fact have been singled out by the anthropogenic principle

In defence of moral imperialism: four equal and universal prima facie principles.

Science.gov (United States)

Dawson, A; Garrard, E

2006-04-01

Raanan Gillon is a noted defender of the four principles approach to healthcare ethics. His general position has always been that these principles are to be considered to be both universal and prima facie in nature. In recent work, however, he has made two claims that seem to present difficulties for this view. His first claim is that one of these four principles, respect for autonomy, has a special position in relation to the others: he holds that it is first among equals. We argue that this claim makes little sense if the principles are to retain their prima facie nature. His second claim is that cultural variation can play an independent normative role in the construction of our moral judgments. This, he argues, enables us to occupy a middle ground between what he sees as the twin pitfalls of moral relativism and (what he calls) moral imperialism. We argue that there is no such middle ground, and while Gillon ultimately seems committed to relativism, it is some form of moral imperialism (in the form of moral objectivism) that will provide the only satisfactory construal of the four principles as prima facie universal moral principles.

Symbiotic architecture: Redefinition of recycling design principles

OpenAIRE

Milan Šijaković; Ana Perić

2018-01-01

The study seeks to examine the possibility of implementing the biological concept of symbiosis into the field of architecture for redefining the design principles of architectural recycling. Through an in-depth analysis of the biological concept of symbiosis (i.e., a close and often long-term interaction between two or more different biological species and the criteria that govern the differentiation between symbiotic associations), three redefined design principles of recycling—commensalism,...

Facilitating the Concept of Universal Design Among Design Students - Changes in Teaching in the Last Decade.

Science.gov (United States)

Vavik, Tom

2016-01-01

This short paper describes and reflects on how the teaching of the concept of Universal Design (UD) has developed in the last decade at the Institute of Design at the Oslo School of Architecture and Design (AHO). Four main changes are described. Firstly, the curriculum has evolved from teaching guidelines and principles to focusing on design processes. Secondly, an increased emphasis is put on cognitive accessibility. Thirdly, non-stigmatizing aesthetics expressions and solutions that communicate through different senses have become more important subjects. Fourthly the teaching of UD has moved from the second to the first year curriculum.

Teaching geometrical principles to design students

Directory of Open Access Journals (Sweden)

Christoph Bartneck

2009-12-01

Full Text Available We propose a new method of teaching the principles of geometry to design students. The students focus on a field of design in which geometry is the design: tessellation. We review different approaches to geometry and the field of tessellation before we discuss the setup of the course. Instead of employing 2D drawing tools, such as Adobe Illustrator, the students define their tessellation in mathematical formulas, using the Mathematica software. This procedure enables them to understand the mathematical principles on which graphical tools, such as Illustrator are built upon. But we do not stop at a digital representation of their tessellation design we continue to cut their tessellations in Perspex. It moves the abstract concepts of math into the real world, so that the students can experience them directly, which provides a tremendous reward to the students.

Teaching geometrical principles to design students

NARCIS (Netherlands)

Feijs, L.M.G.; Bartneck, C.

2009-01-01

We propose a new method of teaching the principles of geometry to design students. The students focus on a field of design in which geometry is the design: tessellation. We review different approaches to geometry and the field of tessellation before we discuss the setup of the course. Instead of

Principles of modern digital design

CERN Document Server

Lala, Parag K

2007-01-01

A major objective of this book is to fill the gap between traditional logic design principles and logic design/optimization techniques used in practice. Over the last two decades several techniques for computer-aided design and optimization of logic circuits have been developed. However, underlying theories of these techniques are inadequately covered or not covered at all in undergraduate text books. This book covers not only the ""classical"" material found in current text books but also selected materials that modern logic designers need to be familiar with.

Parallel power electronics filters in three-phase four-wire systems principle, control and design

CERN Document Server

Wong, Man-Chung; Lam, Chi-Seng

2016-01-01

This book describes parallel power electronic filters for 3-phase 4-wire systems, focusing on the control, design and system operation. It presents the basics of power-electronics techniques applied in power systems as well as the advanced techniques in controlling, implementing and designing parallel power electronics converters. The power-quality compensation has been achieved using active filters and hybrid filters, and circuit models, control principles and operational practice problems have been verified by principle study, simulation and experimental results. The state-of-the-art research findings were mainly developed by a team at the University of Macau. Offering background information and related novel techniques, this book is a valuable resource for electrical engineers and researchers wanting to work on energy saving using power-quality compensators or renewable energy power electronics systems. .

Mechatronics design principles for biotechnology product development.

Science.gov (United States)

Mandenius, Carl-Fredrik; Björkman, Mats

2010-05-01

Traditionally, biotechnology design has focused on the manufacture of chemicals and biologics. Still, a majority of biotechnology products that appear on the market today is the result of mechanical-electric (mechatronic) construction. For these, the biological components play decisive roles in the design solution; the biological entities are either integral parts of the design, or are transformed by the mechatronic system. This article explains how the development and production engineering design principles used for typical mechanical products can be adapted to the demands of biotechnology products, and how electronics, mechanics and biology can be integrated more successfully. We discuss three emerging areas of biotechnology in which mechatronic design principles can apply: stem cell manufacture, artificial organs, and bioreactors. Copyright 2010 Elsevier Ltd. All rights reserved.

Fundamental Principles of Alarm Design

DEFF Research Database (Denmark)

Us, Tolga; Jensen, Niels; Lind, Morten

2011-01-01

Traditionally alarms are designed on the basis of empirical guidelines rather than on a sound scientific framework rooted in a theoretical foundation for process and control system design. This paper proposes scientific principles and a methodology for design of alarms based on a functional...... be applied to any engineering system which can be modeled by MFM. The methodology provides a set of alarms which can facilitate event interpretation and operator support for abnormal situation management. The proposed design methodology provides the information content of the alarms, but does not deal...

Teaching the Principles of Effective Online Course Design: What Works?

Directory of Open Access Journals (Sweden)

Clare Gormley

2014-06-01

Full Text Available While much has been written about the pedagogy and challenges of online learning, there is comparatively little research that advises how online course design competencies can be achieved. Certainly a growing range of course design resources is being created and made openly available, but there is a need to evaluate their actual impact on practice. This predominantly qualitative study describes the impact of two learning interventions – open online tutorials and a design and development workshop – aimed at introducing the fundamentals of online course design. Four online course developers at an Irish university were interviewed about their experiences creating multimedia-based online courses. Two of the developers were given access to targeted learning interventions and were subsequently interviewed about their experiences using those interventions. The main findings were that novice online course developers can potentially learn and apply design principles through a dedicated introductory phase, techniques that promote discussion of effective pedagogy, and ongoing collaboration in course design. These strategies could be adapted to specific contexts elsewhere.

Enhancing the Therapy Experience Using Principles of Video Game Design.

Science.gov (United States)

Folkins, John Wm; Brackenbury, Tim; Krause, Miriam; Haviland, Allison

2016-02-01

This article considers the potential benefits that applying design principles from contemporary video games may have on enhancing therapy experiences. Six principles of video game design are presented, and their relevance for enriching clinical experiences is discussed. The motivational and learning benefits of each design principle have been discussed in the education literature as having positive impacts on student motivation and learning and are related here to aspects of clinical practice. The essential experience principle suggests connecting all aspects of the experience around a central emotion or cognitive connection. The discovery principle promotes indirect learning in focused environments. The risk-taking principle addresses the uncertainties clients face when attempting newly learned skills in novel situations. The generalization principle encourages multiple opportunities for skill transfer. The reward system principle directly relates to the scaffolding of frequent and varied feedback in treatment. Last, the identity principle can assist clients in using their newly learned communication skills to redefine self-perceptions. These principles highlight areas for research and interventions that may be used to reinforce or advance current practice.

Novel Natural Convection Heat Sink Design Concepts From First Principles

Science.gov (United States)

2016-06-01

CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES by Derek E. Fletcher June 2016 Thesis Advisor: Garth Hobson Second Reader...COVERED Master’s Thesis 4. TITLE AND SUBTITLE NOVEL NATURAL CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES 5. FUNDING NUMBERS 6...CONVECTION HEAT SINK DESIGN CONCEPTS FROM FIRST PRINCIPLES Derek E. Fletcher Lieutenant Commander, United States Navy B.S., Southwestern

An Assessment of Culturally Appropriate Design: A Malaysian University Context

Directory of Open Access Journals (Sweden)

Shamsul Arrieya Ariffin

2018-03-01

Full Text Available The growing popularity of mobile devices, together with the constant technological improvement of mobile websites and applications informed about the quality of the user interface design. However, the particularities of mobile devices require special attention in terms of their usability aspects, such as culture. Therefore, this study evaluated the use of culturally appropriate design guidelines for a mobile learning web site. The research methodology used comprised a survey from heuristic evaluation questionnaires with undergraduate students. This research captured the students’ experiences in using the MLearn website of Universiti Pendidikan Sultan Idris, Malaysia.  From the study, the lowest ranking is realistic error management at 3.5, and the highest is suitable content for local culture at 4.6.  This study affirmed that general usability and cultural principles in design are important for a usable mobile learning website system in a local university context.

Design Principles for Augmented Reality Learning

Science.gov (United States)

Dunleavy, Matt

2014-01-01

Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

Robust design principles for reducing variation in functional performance

DEFF Research Database (Denmark)

Christensen, Martin Ebro; Howard, Thomas J.

2016-01-01

This paper identifies, describes and classifies a comprehensive collection of variation reduction principles (VRP) that can be used to increase the robustness of a product and reduce its variation in functional performance. Performance variation has a negative effect on the reliability and percei......This paper identifies, describes and classifies a comprehensive collection of variation reduction principles (VRP) that can be used to increase the robustness of a product and reduce its variation in functional performance. Performance variation has a negative effect on the reliability...... and perceived quality of a product and efforts should be made to minimise it. The design principles are identified by a systematic decomposition of the Taguchi Transfer Function in combination with the use of existing literature and the authors’ experience. The paper presents 15 principles and describes...... their advantages and disadvantages along with example cases. Subsequently, the principles are classified based on their applicability in the various development and production stages. The VRP are to be added to existing robust design methodologies, helping the designer to think beyond robust design tool and method...

Structuring Principles for the Designer

DEFF Research Database (Denmark)

Miller, Thomas Dedenroth; Pedersen, Per Erik Elgård

1998-01-01

This paper suggests a list of structuring principles that support the designer in making alternative concepts for product architectures. Different architectures may support different points of diversification in the product life-cycle. The aim is to balance reuse of resources and reduction...

Integrating rock mechanics issues with repository design through design process principles and methodology

International Nuclear Information System (INIS)

Bieniawski, Z.T.

1996-01-01

A good designer needs not only knowledge for designing (technical know-how that is used to generate alternative design solutions) but also must have knowledge about designing (appropriate principles and systematic methodology to follow). Concepts such as open-quotes design for manufactureclose quotes or open-quotes concurrent engineeringclose quotes are widely used in the industry. In the field of rock engineering, only limited attention has been paid to the design process because design of structures in rock masses presents unique challenges to the designers as a result of the uncertainties inherent in characterization of geologic media. However, a stage has now been reached where we are be able to sufficiently characterize rock masses for engineering purposes and identify the rock mechanics issues involved but are still lacking engineering design principles and methodology to maximize our design performance. This paper discusses the principles and methodology of the engineering design process directed to integrating site characterization activities with design, construction and performance of an underground repository. Using the latest information from the Yucca Mountain Project on geology, rock mechanics and starter tunnel design, the current lack of integration is pointed out and it is shown how rock mechanics issues can be effectively interwoven with repository design through a systematic design process methodology leading to improved repository performance. In essence, the design process is seen as the use of design principles within an integrating design methodology, leading to innovative problem solving. In particular, a new concept of open-quotes Design for Constructibility and Performanceclose quotes is introduced. This is discussed with respect to ten rock mechanics issues identified for repository design and performance

Industrial instrumentation principles and design

CERN Document Server

Padmanabhan, Tattamangalam R

2000-01-01

Pneumatic, hydraulic and allied instrumentation schemes have given way to electronic schemes in recent years thanks to the rapid strides in electronics and allied areas. Principles, design and applications of such state-of-the-art instrumentation schemes form the subject matter of this book. Through representative examples, the basic building blocks of instrumentation schemes are identified and each of these building blocks discussed in terms of its design and interface characteristics. The common generic schemes synthesized with such building blocks are dealt with subsequently. This forms the scope of Part I. The focus in Part II is on application. Displacement and allied instrumentation, force and allied instrumentation and process instrumentation in terms of temperature, flow, pressure level and other common process variables are dealt with separately and exhaustively. Despite the diversity in the sensor principles and characteristics and the variety in the applications and their environments, it is possib...

Beyond access: a case study on the intersection between accessibility, sustainability, and universal design.

Science.gov (United States)

Gossett, Andrea; Mirza, Mansha; Barnds, Ann Kathleen; Feidt, Daisy

2009-11-01

A growing emphasis has been placed on providing equal opportunities for all people, particularly people with disabilities, to support participation. Barriers to participation are represented in part by physical space restrictions. This article explores the decision-making process during the construction of a new office building housing a disability-rights organization. The building project featured in this study was developed on the principles of universal design, maximal accessibility, and sustainability to support access and participation. A qualitative case study approach was used involving collection of data through in-depth interviews with key decision-makers; non-participant observations at design meetings; and on-site tours. Qualitative thematic analysis along with the development of a classification system was used to understand specific building elements and the relevant decision processes from which they resulted. Recording and analyzing the design process revealed several key issues including grassroots involvement of stakeholders; interaction between universal design and sustainable design; addressing diversity through flexibility and universality; and segregationist accessibility versus universal design. This case study revealed complex interactions between accessibility, universal design, and sustainability. Two visual models were proposed to understand and analyze these complexities.

MWH's water treatment: principles and design

National Research Council Canada - National Science Library

Crittenden, John C

2012-01-01

... with additional worked problems and new treatment approaches. It covers both the principles and theory of water treatment as well as the practical considerations of plant design and distribution...

EVALUATION OF STREET FURNITURE ACCORDING TO BASIC DESIGN PRINCIPLES

OpenAIRE

GHORAB, Peyman; YÜCEL CAYMAZ, Gökçen Firdevs

2014-01-01

In the urban context, it is important to create more comfortable and livable environments with proper planning, design and application. Because aesthetic considerations are of more importance today, designing urban furniture to give a more beautiful appearance to cities is of high priority; designers and those working in related disciplines must be careful to observe these principles throughout the design process. This paper describes research conducted to review the aesthetic principles invo...

The growth of language: Universal Grammar, experience, and principles of computation.

Science.gov (United States)

Yang, Charles; Crain, Stephen; Berwick, Robert C; Chomsky, Noam; Bolhuis, Johan J

2017-10-01

Human infants develop language remarkably rapidly and without overt instruction. We argue that the distinctive ontogenesis of child language arises from the interplay of three factors: domain-specific principles of language (Universal Grammar), external experience, and properties of non-linguistic domains of cognition including general learning mechanisms and principles of efficient computation. We review developmental evidence that children make use of hierarchically composed structures ('Merge') from the earliest stages and at all levels of linguistic organization. At the same time, longitudinal trajectories of development show sensitivity to the quantity of specific patterns in the input, which suggests the use of probabilistic processes as well as inductive learning mechanisms that are suitable for the psychological constraints on language acquisition. By considering the place of language in human biology and evolution, we propose an approach that integrates principles from Universal Grammar and constraints from other domains of cognition. We outline some initial results of this approach as well as challenges for future research. Copyright © 2017 Elsevier Ltd. All rights reserved.

Serious game design principles: The impact of game design on learning outcomes

Science.gov (United States)

Martin, Michael W.

This dissertation examines the research question "How do video game design principles affect learning outcomes in serious games?" This research first develops a theoretical foundation concerning the meaning of the terms "game" and "serious game". This conceptual clarification is broken down into analytic propositions, which state that games have participants, rules, goals and challenges, and synthetic propositions, which state that the games should be intrinsically compelling, provide meaningful choices, and be self encapsulated. Based on these synthetic propositions, three hypotheses were developed. The hypotheses are that games with an enhanced aesthetic presentation, more meaningful choices, or provide player competition will elicit higher learning outcomes than identical games without these factors. These hypotheses were tested via a quantitative experiment involving 172 undergraduate students in the Old Dominion University Chemistry Department. The students were asked to play a chemistry-oriented serious game entitled Element Solitaire©, which was created by the research author. The students were randomly given different treatments of the Element Solitaire© game to play, and the difference between their learning outcomes were compared. The experimental results demonstrated that the aesthetic presentation of a game can have a significant impact upon the learning outcome. The experiment was not able to discern significant effects from the choice or competition conditions, but further examination of the experimental data did reveal some insight into these aspects of serious game design. Choices need to provide the player with options that have a sufficient value that they will be considered and the application of competition within games needs to be judiciously implemented to promote a positive affect for all players. The results of the theoretical foundations and empirical evidence were then combined with additional theoretical research to develop a set of

Design principles and developmental mechanisms underlying retinal mosaics.

Science.gov (United States)

Reese, Benjamin E; Keeley, Patrick W

2015-08-01

Most structures within the central nervous system (CNS) are composed of different types of neuron that vary in both number and morphology, but relatively little is known about the interplay between these two features, i.e. about the population dynamics of a given cell type. How such arrays of neurons are distributed within a structure, and how they differentiate their dendrites relative to each other, are issues that have recently drawn attention in the invertebrate nervous system, where the genetic and molecular underpinnings of these organizing principles are being revealed in exquisite detail. The retina is one of the few locations where these principles have been extensively studied in the vertebrate CNS, indeed, where the design principles of 'mosaic regularity' and 'uniformity of coverage' were first explicitly defined, quantified, and related to each other. Recent studies have revealed a number of genes that influence the formation of these histotypical features in the retina, including homologues of those invertebrate genes, although close inspection reveals that they do not always mediate comparable developmental processes nor elucidate fundamental design principles. The present review considers just how pervasive these features of 'mosaic regularity' and 'uniform dendritic coverage' are within the mammalian retina, discussing the means by which such features can be assessed in the mature and developing nervous system and examining the limitations associated with those assessments. We then address the extent to which these two design principles co-exist within different populations of neurons, and how they are achieved during development. Finally, we consider the neural phenotypes obtained in mutant nervous systems, to address whether a prospective gene of interest underlies those very design principles. © 2014 The Authors. Biological Reviews © 2014 Cambridge Philosophical Society.

Teacher Candidates Implementing Universal Design for Learning: Enhancing Picture Books with QR Codes

Science.gov (United States)

Grande, Marya; Pontrello, Camille

2016-01-01

The purpose of this study was to investigate if teacher candidates could gain knowledge of the principles of Universal Design for Learning by enhancing traditional picture books with Quick Response (QR) codes and to determine if the process of making these enhancements would impact teacher candidates' comfort levels with using technology on both…

Universal uncertainty principle in the measurement operator formalism

International Nuclear Information System (INIS)

Ozawa, Masanao

2005-01-01

Heisenberg's uncertainty principle has been understood to set a limitation on measurements; however, the long-standing mathematical formulation established by Heisenberg, Kennard, and Robertson does not allow such an interpretation. Recently, a new relation was found to give a universally valid relation between noise and disturbance in general quantum measurements, and it has become clear that the new relation plays a role of the first principle to derive various quantum limits on measurement and information processing in a unified treatment. This paper examines the above development on the noise-disturbance uncertainty principle in the model-independent approach based on the measurement operator formalism, which is widely accepted to describe a class of generalized measurements in the field of quantum information. We obtain explicit formulae for the noise and disturbance of measurements given by measurement operators, and show that projective measurements do not satisfy the Heisenberg-type noise-disturbance relation that is typical in the gamma-ray microscope thought experiments. We also show that the disturbance on a Pauli operator of a projective measurement of another Pauli operator constantly equals √2, and examine how this measurement violates the Heisenberg-type relation but satisfies the new noise-disturbance relation

Assessment Of Co60 Industrial Irradiators According To Basic Design Principles

Directory of Open Access Journals (Sweden)

El-Sayed Mohamed El Refaie

2017-04-01

Full Text Available Ensuring safe and easy operation providing relative uniform dose in the product and maximizing radiation utilization are the basic design principles for each Co60 industrial irradiator to maintain radiation safety. The study shows an assessment for four industrial irradiators to determine which active results were been maintained by using basic design principles. Different designs elements of the chosen irradiators have been illustrated and studied. The study shows that IRASM and ROBO industrial irradiators satisfy all basic design principles. IAEA-NR3772 irradiator maintains only two of the three basic design principles due to rotating door. Brevion irradiator satisfies only the principle of relative uniform radiation dose in product. Without affecting radiation safety this study proposes a new design of the irradiator to maximize energy utilization by adding a new track for low density products and also a static irradiation for cultural heritage beside the main track of high density products.

Temporal Evolution of Design Principles in Engineering Systems: Analogies with Human Evolution

DEFF Research Database (Denmark)

Deb, Kalyanmoy; Bandaru, Sunith; Tutum, Cem Celal

2012-01-01

constructed later during optimization. Interestingly, there exists a simile between evolution of design principles with that of human evolution. Such information about the hierarchy of key design principles should enable designers to have a deeper understanding of their problems.......Optimization of an engineering system or component makes a series of changes in the initial random solution(s) iteratively to form the final optimal shape. When multiple conflicting objectives are considered, recent studies on innovization revealed the fact that the set of Pareto-optimal solutions...... portray certain common design principles. In this paper, we consider a 14-variable bi-objective design optimization of a MEMS device and identify a number of such common design principles through a recently proposed automated innovization procedure. Although these design principles are found to exist...

Design Principles for Achieving Integrated Healthcare Information Systems

DEFF Research Database (Denmark)

Jensen, Tina Blegind

2013-01-01

and Lyytinen, to examine the design principles that facilitated this smallscale project to expand and become widespread. As a result of my findings, I outline three lessons learned that emphasize: (i) principles of flexibility, (ii) expansion from the installed base through modular strategies and (iii...

Using Mathematical Modeling and Set-Based Design Principles to Recommend an Existing CVL Design

Science.gov (United States)

2017-09-01

MATHEMATICAL MODELING AND SET-BASED DESIGN PRINCIPLES TO RECOMMEND AN EXISTING CVL DESIGN by William H. Ehlies September 2017 Thesis Advisor...Office of Management and Budget, Paperwork Reduction Project (0704-0188) Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE...September 2017 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE USING MATHEMATICAL MODELING AND SET-BASED DESIGN PRINCIPLES

Transformer design principles with applications to core-form power transformers

CERN Document Server

Del Vecchio, Robert M; Feeney, Mary-Ellen F

2001-01-01

Transformer Design Principles presents the theory of transformer operation and the methods and techniques of designing them. It emphasizes the physical principles and mathematical tools for simulating transformer behavior, including modern computer techniques. The scope of the book includes types of construction, circuit analysis, mechanical aspects of design, high voltage insulation requirements, and cooling design. The authors also address test procedures and reliability methods to assure successful design and discuss the economic analysis of designs. Summarizing material currently scattered

Universal Design for Instruction: Extending the Universal Design Paradigm to College Instruction

Science.gov (United States)

McGuire, Joan M.; Scott, Sally S.

2006-01-01

Universal design for instruction (UDI) represents the systematic application of universal design, the construct from architecture and product development, to instructional practices in higher education. In addition to a description of the deliberative process by which UDI was developed, this article provides confirmatory evidence of the validity…

Practicing universal design to actual hand tool design process.

Science.gov (United States)

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Macro-environmental policy: Principles and design

International Nuclear Information System (INIS)

Huppes, G.

1993-01-01

The central theme of this book is how macro-environmental policy can be developed, which does not prescribe or suggest specific technologies and products bu realizes the environmental quality desired by changing the general context. The publication is composed of four main parts. The framework for analysis and the normative principles for policy design and evaluation, the first two parts, form the analytic core. The framework for analysis gives a classification of instruments in terms of permutations of a limited number of defining elements. The normative principles guide choices in instrument design and, as the flexible response strategy, guide their application in specific policies. Detailing two main new instruments (the standard method for life cycle analysis and the substance deposit, and applying the instrument strategy as developed to the cases make up the next two parts

Design principles for a large RFP experiment

International Nuclear Information System (INIS)

Phillpott, J.; Rostagni, G.; Di Marco, J.

1981-01-01

An RFP experiment (RFX) has been designed by an International Design Team, by groups of collaborating physicists and engineers working in their home laboratories. This international collaborative project has been brought to an advanced stage of system and component design by the co-operation of three design teams under the co-ordination of a Design Manager, based at Culham Laboratory. The paper summaries the important design principles for an RFP device, based on the outcome of this collaborative design project

Design Principles for Synthesizable Processor Cores

DEFF Research Database (Denmark)

Schleuniger, Pascal; McKee, Sally A.; Karlsson, Sven

2012-01-01

As FPGAs get more competitive, synthesizable processor cores become an attractive choice for embedded computing. Currently popular commercial processor cores do not fully exploit current FPGA architectures. In this paper, we propose general design principles to increase instruction throughput...

Experiential Interface Design for the Transference of Scientific Publications from University to SMEs

DEFF Research Database (Denmark)

Lykke, Marianne; Løkkegaard, Sarai; Jantzen, Christian

2017-01-01

to develop suggestions for the interface design of a generic knowledge pathway. The interface design is based on principles from experience design with the aim to draw attention to the scientific knowledge and make it desirable and understandable. The study used practice theory as its conceptual framework......Transferring knowledge between universities and industry is known to be problematic. The paper addresses the situation of small and medium-sized enterprises (SMEs) in order to understand their use of scientific knowledge. We use our understanding of SME situations and information practices...... to interface design. Generally, the SMEs look for knowledge in two situations: when they have a pressing problem to solve and when they want inspiration for new business opportunities. The SMEs consult many different channels and scientific knowledge from universities is not their first choice. SMEs see...

Applying multimedia design principles enhances learning in medical education.

Science.gov (United States)

Issa, Nabil; Schuller, Mary; Santacaterina, Susan; Shapiro, Michael; Wang, Edward; Mayer, Richard E; DaRosa, Debra A

2011-08-01

The Association of American Medical Colleges' Institute for Improving Medical Education's report entitled 'Effective Use of Educational Technology' called on researchers to study the effectiveness of multimedia design principles. These principles were empirically shown to result in superior learning when used with college students in laboratory studies, but have not been studied with undergraduate medical students as participants. A pre-test/post-test control group design was used, in which the traditional-learning group received a lecture on shock using traditionally designed slides and the modified-design group received the same lecture using slides modified in accord with Mayer's principles of multimedia design. Participants included Year 3 medical students at a private, midwestern medical school progressing through their surgery clerkship during the academic year 2009-2010. The medical school divides students into four groups; each group attends the surgery clerkship during one of the four quarters of the academic year. Students in the second and third quarters served as the modified-design group (n=91) and students in the fourth-quarter clerkship served as the traditional-design group (n=39). Both student cohorts had similar levels of pre-lecture knowledge. Both groups showed significant improvements in retention (paffect transfer of learning. Further research on applying the principles of multimedia design to medical education is needed to verify the impact it has on the long-term learning of medical students, as well as its impact on other forms of multimedia instructional programmes used in the education of medical students. © Blackwell Publishing Ltd 2011.

Safety principles and design criteria for nuclear power stations

International Nuclear Information System (INIS)

Gazit, M.

1982-01-01

The criteria and safety principles for the design of nuclear power stations are presented from the viewpoint of a nuclear engineer. The design, construction and operation of nuclear power stations should be carried out according to these criteria and safety principles to ensure, to a reasonable degree, that the likelihood of release of radioactivity as a result of component failure or human error should be minimized. (author)

Design Principles for Hybrid Ventilation

DEFF Research Database (Denmark)

Heiselberg, Per

For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system -Hybrid Ventilation. ....... The hybrid ventilation concepts, design challenges and - principles are discussed and illustrated by four building examples....

RFID Malware: Design Principles and Examples

NARCIS (Netherlands)

Rieback, M.R.; Simpson, P.N.D.; Crispo, B.; Tanenbaum, A.S.

2006-01-01

This paper explores the concept of malware for Radio Frequency Identification (RFID) systems - including RFID exploits, RFID worms, and RFID viruses. We present RFID malware design principles together with concrete examples; the highlight is a fully illustrated example of a self-replicating RFID

Patterns, principles, and practices of domain-driven design

CERN Document Server

Millett, Scott

2015-01-01

Methods for managing complex software construction following the practices, principles and patterns of Domain-Driven Design with code examples in C# This book presents the philosophy of Domain-Driven Design (DDD) in a down-to-earth and practical manner for experienced developers building applications for complex domains. A focus is placed on the principles and practices of decomposing a complex problem space as well as the implementation patterns and best practices for shaping a maintainable solution space. You will learn how to build effective domain models through the use of tactical pat

Endocrine Disruptor Screening Program (EDSP) Universe of Chemicals and General Validation Principles

Science.gov (United States)

This document was developed by the EPA to provide guidance to staff and managers regarding the EDSP universe of chemicals and general validation principles for consideration of computational toxicology tools for chemical prioritization.

Design Principles and Concepts for Enhancing Long-Term Cap Performance and Confidence

International Nuclear Information System (INIS)

Steven J. Piet; Robert P. Breckenridge; Gregory J. White; Jacob J. Jacobson; Hilary I. Inyang

2005-01-01

The siting of new landfills is becoming increasing difficult as the public and stakeholders want more confidence of performance for longer times and landfill owners want to store more waste in the least area while knowing and limiting their long-term liabilities. These changes motivate re-examination of long-term performance mechanisms and their implications for cap and barrier designs. Accordingly, in this paper we first consider design principles from the standpoint of long-term performance and management, including the ability to monitor and repair barriers. We then consider some design concepts that may implement these principles, especially evapo-transpiration (ET) caps. We suggest five design principles based on experience in the cap and barrier field as well as other engineering disciplines. These principles are as follows: (1) Establish a clear and defendable design basis. (2) Design for ease of monitoring and repair. (3) Analyze the barrier as a dynamic system, not static. (4) Work with nature, not against. (5) Recognize that increased complexity can reduce, not enhance, net performance. ET caps are an excellent embodiment of these design principles. We apply the design principles to ET caps, as well as variants such as erosion armor, capillary breaks, bio-intrusion layers, and low permeability material layers

Integrating medical, assistive, and universal design products and technologies: Assistive Technology Service Method (ATSM).

Science.gov (United States)

Elsaesser, Linda-Jeanne; Bauer, Stephen

2012-07-01

ISO26000 provides guidance on effective organizational performance that recognizes social responsibility (including rights of persons with disabilities (PWD)), engages stakeholders, and contributes to sustainable development [1]. Millennium Development Goals 2010 state: while progress has been made, insufficient dedication to sustainable development, and inequalities to the most vulnerable people require attention [2]. World Report on Disability 2011 recommendations includes improved data collection and removal of barriers to rehabilitation that empower PWD [3]. The Assistive Technology Service Method (ATSM), Assistive Technology Device Classification (ATDC) and Matching Person and Technology (MPT) provide an evidence-based, standardized, internationally comparable framework to improve rehabilitation interventions [4-6]. The ATSM and ATDC support universal design (UD) principles and provision of universal technology. The MPT assures interventions are effective and satisfactory to end-users [7]. The ICF conceptual framework and common language are used throughout [8]. Research findings on healthcare needs are translated. ATSM applications in support of these findings are presented. National initiatives demonstrate the need and value of the ATSM as an evidence-based, user-centric, interdisciplinary method to improve individual and organizational performance for rehabilitation [including AT] services. Two Disability & Rehabilitation: Assistive Technology articles demonstrate ATSM and ATDC use to strengthen rehabilitation services and integrate Universal Design principles for socially responsible behavior.

Design principles for data- and change-oriented organisational analysis in workplace health promotion.

Science.gov (United States)

Inauen, A; Jenny, G J; Bauer, G F

2012-06-01

This article focuses on organizational analysis in workplace health promotion (WHP) projects. It shows how this analysis can be designed such that it provides rational data relevant to the further context-specific and goal-oriented planning of WHP and equally supports individual and organizational change processes implied by WHP. Design principles for organizational analysis were developed on the basis of a narrative review of the guiding principles of WHP interventions and organizational change as well as the scientific principles of data collection. Further, the practical experience of WHP consultants who routinely conduct organizational analysis was considered. This resulted in a framework with data-oriented and change-oriented design principles, addressing the following elements of organizational analysis in WHP: planning the overall procedure, data content, data-collection methods and information processing. Overall, the data-oriented design principles aim to produce valid, reliable and representative data, whereas the change-oriented design principles aim to promote motivation, coherence and a capacity for self-analysis. We expect that the simultaneous consideration of data- and change-oriented design principles for organizational analysis will strongly support the WHP process. We finally illustrate the applicability of the design principles to health promotion within a WHP case study.

Design principles for global commons: Natural resources and emerging technologies

Directory of Open Access Journals (Sweden)

Paul C. Stern

2011-09-01

Full Text Available Ostrom’s design principles for managing common pool resources were developed largely by examining local commons involving natural resources. This paper enumerates several key characteristics that distinguish such commons from more complex commons involving global resources and the risks of emerging technologies. It considers the degree to which the design principles transfer to those commons and concludes that although they have considerable external validity, the list needs some modification and elaboration to apply to global resources and risk commons. A list of design principles is offered for global resource commons and the risks of emerging technologies. Applying Ostrom’s approach to global resources and emerging technologies can improve understanding and expand the solution set for these problems from international treaties, top-down national regulation, and interventions in market pricing systems to include non-governmental institutions that embody principles of self-governance.

UNPACKED: Middlesex University Product Design

OpenAIRE

Griffiths, Wyn

2013-01-01

'UNPACKED: Middlesex University Product Design' is showcasing the 2013 graduating group of the Middlesex University BA/BSc Product Design course.\\ud The group of Product Designers will be exhibiting at two places in 2013; at the Old Truman Brewery, Brick Lane, London from 6-10th June and at the prestigious New Designers exhibition, Business Design Centre, London 3-6th July.

Factors Affecting University Library Website Design

OpenAIRE

Kim, Yongi-Mi; University of Oklahoma

2011-01-01

Existing studies have extensively explored factors that affect users’ intentions to use university library website resources (ULWR); yet little attention has been given to factors affecting university library website design. This paper investigates factors that affect university library website design and assesses the success of the university library website from both designers’ and users’ perspectives. The findings show that when planning a website, university web designers consider univers...

Universal Design and Social Sustainability in the City: The Case Study of Tehran Iran.

Science.gov (United States)

Eslami, Lida; Mahmoudi, Mohammad Mehdi

2016-01-01

Following the proposal of Universal Design in 1974, a public society was founded in Iran in 1981, in order to aid the disabled victims of the Iran-Iraq war. Official authorities have also made legislation on this topic. During the last three decades many efforts have been made to apply this concept in public spaces. Unfortunately these have not succeeded. It means despite the existence of inherent rules and regulations and the general will to apply the principles of Universal Design in Tehran, urban spaces are still an improper environment for the independent presence and movement of people with disabilities. This problem is considered a serious threat for social sustainability in Tehran. The main goal of this research is finding solutions for increasing social interaction and greater participation of people with disabilities in public spaces by applying Universal Design. The research is seeking to answer these questions: What is causing inefficiency in the regulation of Universal Design in Tehran? Why is social participation by people with disabilities limited in Tehran? Which factors are contributing to Universal Design in Tehran? The research is based on applied theory, field research methods and a mixed qualitative-quantitative approach. In addition, and the results include both empirical and functional solutions. The consequences show that many of problems are rooted in cultural issues. The people must attend to disability as a public concern which can involve everybody. They must comprehend that all the members of the society, regardless of their physical condition, have the right to use public facilities independently. The second problem is related to lack of any integrated approach to applying Universal Design. This research proposes some solutions such as preparation a Universal Design master plan, an integrated approach for implementation project in all organizations, and public education for improving citizens' knowledge about Universal Design.

Mapping of Affordance and Activity as the Biophilic Design Principle of Blue Lagoon Tourism Area Yogyakarta

Directory of Open Access Journals (Sweden)

Saptorini Hastuti

2018-01-01

Full Text Available Bathing and playing in the river is not a new phenomenon for some people. But this experience creates a recreational spirit on the Tepusriver which is now better known as the Blue Lagoon. This area is a term for the settlement that is split a piece of the river in the dusun Ndalem Ngemplak Sleman. Its tributaries are clear and blue, surrounded by some springs with natural bamboo groves and old trees that invite local and around communities for recreation. The local community has anticipated it by responding to the communities’ demands as well as the recreation area. Appear sporadically “warungs” and recreational activities follow-up though not yet grown in conceptual. This paper aims to study the map of affordance and activity of previous research findings and could be used to the biophilic design to afford the health, productivity, and wellbeing in the tourism area. The method is by synthesizing the previous research findings in 2016, some relevant urban design theories, and biophilic design principle. The conclusion is paid attention to two main principles. The first principle is maximizing the utilization of existing natural properties and the existing cultural skills into its development to nourish visitors both physically and psychologically. The second principle is the Government, and Non-Government Organizations (i.e., expertise, academics, universities, investors support, both policy and financially, in many sectors: tourism, environment, and infrastructure.

Design Principles for the Information Architecture of a SMET Education Digital Library.

Science.gov (United States)

Dong, Andy; Agogino, Alice M.

This implementation paper introduces principles for the information architecture of an educational digital library, principles that address the distinction between designing digital libraries for education and designing digital libraries for information retrieval in general. Design is a key element of any successful product. Good designers and…

Factors Affecting University Library Website Design

Directory of Open Access Journals (Sweden)

Yongi-Mi Kim

2011-09-01

Full Text Available Existing studies have extensively explored factors that affect users’ intentions to use university library website resources (ULWR; yet little attention has been given to factors affecting university library website design. This paper investigates factors that affect university library website design and assesses the success of the university library website from both designers’ and users’ perspectives. The findings show that when planning a website, university web designers consider university guidelines, review other websites, and consult with experts and other divisions within the library; however, resources and training for the design process are lacking. While website designers assess their websites as highly successful, user evaluations are somewhat lower. Accordingly, use is low, and users rely heavily on commercial websites. Suggestions for enhancing the usage of ULWR are provided.

Developing Students' Creative Self-Efficacy Based on Design-Thinking: Evaluation of an Elective University Course

Science.gov (United States)

Ohly, Sandra; Plückthun, Laura; Kissel, Dorothea

2017-01-01

The development of novel and useful ideas is a process that can be described in multiple steps, including information gathering, generating ideas and evaluating ideas. We evaluated a university course that was developed based on design thinking principles which employ similar steps. Our results show that the course was not effective in enhancing…

75 FR 80571 - Core Principles and Other Requirements for Designated Contract Markets

Science.gov (United States)

2010-12-22

... Part II Commodity Futures Trading Commission 17 CFR Parts 1, 16, and 38 Core Principles and Other... CFR Parts 1, 16, and 38 RIN 3038-AD09 Core Principles and Other Requirements for Designated Contract... Principles 1. Subpart B--Designation as Contract Market 2. Subpart C--Compliance With Rules i. Proposed Sec...

Sustainable Urban Development: Spatial Analyses as Novel Tools for Planning a Universally Designed City

Directory of Open Access Journals (Sweden)

Joanna Borowczyk

2018-05-01

Full Text Available The aim of the research was to analyze the “design for all” concept as a key strategy for creating social sustainability. The paper attempts to answer the question: how can universal design contribute to the rational development of the city space? The author has taken part in participatory experiments. The research took into account various criteria, including the level of the city space’s adaptation to the needs and capabilities of persons with different disabilities. Analyses included qualitative studies concerning the possibilities of developing the social capital as well as creating and preserving a cohesive social structure. The analytic process allowed determining the means of raising the quality of urban planning. Finding effective and reliable analytical tools enabling the development of healthy cities which are compatible with the principles of sustainability could become both a great chance and a great challenge for urban planners. Transition from the microplanning to the macroplanning scale and following the principles of universal design at the stage of the formation of urban concepts using spatiotemporal modelling methods will lead to the creation of harmonious accessible spaces adjusted to the needs of present and future users, which will generate sustainable development and lead to the healing of a city.

The Value of the Operational Principle in Instructional Design

Science.gov (United States)

Gibbons, Andrew S.

2009-01-01

Formal design studies are increasing our insight into design processes, including those of instructional design. Lessons are being learned from other design fields, and new techniques and concepts can be imported as they are demonstrated effective. The purpose of this article is to introduce a design concept--the "operational principle"--for…

A nordic charter for universal design.

Science.gov (United States)

Björk, Evastina

2014-02-01

The aim of this paper is to present the result of a pioneer project; A Nordic Charter for Universal Design, which was initiated by the Norwegian Directorate for Children, Youth and Family Affairs in 2011. The purpose of the Charter was to present rationales that stated prerequisites for successful investment in Universal Design, and to establish a platform for further research and good practice. It was also meant to contribute to spreading of information and knowledge about the importance of guidance by the concept of Universal Design of initiatives with effects on the public arena. A Nordic group of researchers and professionals in the field ended up after 8 months of work with a written document: "A Nordic Charter for Universal Design", which was presented at the International Conference in Universal Design in Oslo, Norway (UD 2012). A Nordic Charter for Universal Design. Persons with disabilities often experience the public arenas environments, products and services as poorly-designed to fit their abilities and/or their needs. Together with the demographic changes in the Nordic societies with an increasing number of elderly people, it needs initiatives to improve independence, accessibility and participation in society. A strategy which aims to make design and composition of different environments, products, communication, information technology and services accessible, usable and understandable to as many as possible is Universal Design.

Emergent features and perceptual objects: re-examining fundamental principles in analogical display design.

Science.gov (United States)

Holt, Jerred; Bennett, Kevin B; Flach, John M

2015-01-01

Two sets of design principles for analogical visual displays, based on the concepts of emergent features and perceptual objects, are described. An interpretation of previous empirical findings for three displays (bar graph, polar graphic, alphanumeric) is provided from both perspectives. A fourth display (configural coordinate) was designed using principles of ecological interface design (i.e. direct perception). An experiment was conducted to evaluate performance (accuracy and latency of state identification) with these four displays. Numerous significant effects were obtained and a clear rank ordering of performance emerged (from best to worst): configural coordinate, bar graph, alphanumeric and polar graphic. These findings are consistent with principles of design based on emergent features; they are inconsistent with principles based on perceptual objects. Some limitations of the configural coordinate display are discussed and a redesign is provided. Practitioner Summary: Principles of ecological interface design, which emphasise the quality of very specific mappings between domain, display and observer constraints, are described; these principles are applicable to the design of all analogical graphical displays.

34 CFR 300.44 - Universal design.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Universal design. 300.44 Section 300.44 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF SPECIAL EDUCATION AND... DISABILITIES General Definitions Used in This Part § 300.44 Universal design. Universal design has the meaning...

Non-Flutter Design Principle for long Span Bridges

DEFF Research Database (Denmark)

Johansson, Jens; Andersen, Michael Styrk; Starch Øvre, Michele

velocity for a thin airfoil shows an asymptotical behavior. In traditional bridge design the torsional-to-vertical frequency ratio is increased to obtain higher flutter wind velocities. In the present study, we investigate, what we will label the non-flutter design principle, in which the torsional...

Designing User-Computer Dialogues: Basic Principles and Guidelines.

Science.gov (United States)

Harrell, Thomas H.

This discussion of the design of computerized psychological assessment or testing instruments stresses the importance of the well-designed computer-user interface. The principles underlying the three main functional elements of computer-user dialogue--data entry, data display, and sequential control--are discussed, and basic guidelines derived…

Developing design principles for a Virtual Hospice: improving access to care.

Science.gov (United States)

Taylor, Andrea; French, Tara; Raman, Sneha

2018-03-01

Providing access to hospice services will become increasingly difficult due to the pressures of an ageing population and limited resources. To help address this challenge, a small number of services called Virtual Hospice have been established. This paper presents early-stage design work on a Virtual Hospice to improve access to services provided by a hospice (Highland Hospice) serving a largely remote and rural population in Scotland, UK. The study was structured as a series of Experience Labs with Highland Hospice staff, healthcare professionals and patients. Experience Labs employ a participatory design approach where participants are placed at the centre of the design process, helping to ensure that the resultant service meets their needs. Data from the Experience Labs were analysed using qualitative thematic analysis and design analysis. A number of themes and barriers to accessing Highland Hospice services were identified. In response, an initial set of seven design principles was developed. Design principles are high-level guidelines that are used to improve prioritisation and decision making during the design process by ensuring alignment with research insights. The design principles were piloted with a group of stakeholders and gained positive feedback. The design principles are intended to guide the ongoing development of the Highland Hospice Virtual Hospice. However, the challenges faced by Highland Hospice in delivering services in a largely remote and rural setting are not unique. The design principles, encompassing digital and non-digital guidelines, or the design approach could be applied by other hospices in the UK or overseas. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

Science.gov (United States)

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Principle design of an energy efficient transfemoral prosthesis.

NARCIS (Netherlands)

Veltink, P.H.; Ünal, Ramazan; Eberle, W.; Hekman, Edsko E.G.; Carloni, Raffaella; Koopman, Hubertus F.J.M.; Stramigioli, Stefano

2009-01-01

In the pursuit of realizing an energy efficient transfemoral prosthetic, in this paper we present a preliminary study on a principle design. In particular, the design is based on the idea that the efficiency of the system can be realized by energetically coupling the knee and the ankle joints. In

Intelligent computer systems in engineering design principles and applications

CERN Document Server

Sunnersjo, Staffan

2016-01-01

This introductory book discusses how to plan and build useful, reliable, maintainable and cost efficient computer systems for automated engineering design. The book takes a user perspective and seeks to bridge the gap between texts on principles of computer science and the user manuals for commercial design automation software. The approach taken is top-down, following the path from definition of the design task and clarification of the relevant design knowledge to the development of an operational system well adapted for its purpose. This introductory text for the practicing engineer working in industry covers most vital aspects of planning such a system. Experiences from applications of automated design systems in practice are reviewed based on a large number of real, industrial cases. The principles behind the most popular methods in design automation are presented with sufficient rigour to give the user confidence in applying them on real industrial problems. This book is also suited for a half semester c...

78 FR 32988 - Core Principles and Other Requirements for Designated Contract Markets; Correction

Science.gov (United States)

2013-06-03

... COMMODITY FUTURES TRADING COMMISSION 17 CFR Part 38 RIN 3038-AD09 Core Principles and Other... regarding Core Principles and Other Requirements for Designated Contract Markets by inserting a missing... regarding Core Principles and Other Requirements for Designated Contract Markets (77 FR 36612, June 19, 2012...

Universal Design for Learning in the Classroom: Practical Applications. What Works for Special-Needs Learners Series

Science.gov (United States)

Hall, Tracey E., Ed.; Meyer, Anne, Ed.; Rose, David H., Ed.

2012-01-01

Clearly written and well organized, this book shows how to apply the principles of universal design for learning (UDL) across all subject areas and grade levels. The editors and contributors describe practical ways to develop classroom goals, assessments, materials, and methods that use UDL to meet the needs of all learners. Specific teaching…

Communications receivers principles and design

CERN Document Server

Rohde, Ulrich L; Zahnd, Hans

2017-01-01

This thoroughly updated guide offers comprehensive explanations of the science behind today’s radio receivers along with practical guidance on designing, constructing, and maintaining real-world communications systems. You will explore system planning, antennas and antenna coupling, amplifiers and gain control, filters, mixers, demodulation, digital communication, and the latest software defined radio (SDR) technology. Written by a team of telecommunication experts, Communications Receivers: Principles and Design, Fourth Edition, features technical illustrations, schematic diagrams, and detailed examples. Coverage includes: • Basic radio considerations • Radio receiver characteristics • Receiver system planning • Receiver implementation considerations • RF and baseband techniques for Software-Defined Radios • Transceiver SDR considerations • Antennas and antenna coupling • Mixers • Frequency sources and control • Ancillary receiver circuits • Performance measurement

Four Principles for User Interface Design of Computerised Clinical Decision Support Systems

DEFF Research Database (Denmark)

Kanstrup, Anne Marie; Christiansen, Marion Berg; Nøhr, Christian

2011-01-01

emphasises a focus on how users interact with the system, a focus on how information is provided by the system, and four principles of interaction. The four principles for design of user interfaces for CDSS are summarised as four A’s: All in one, At a glance, At hand and Attention. It is recommended that all...... four interaction principles are integrated in the design of user interfaces for CDSS, i.e. the model is an integrated model which we suggest as a guide for interaction design when working with preventing medication errors....

Basic principles governing the design of magnetic switches

International Nuclear Information System (INIS)

Birx, D.L.; Lauer, E.J.; Reginato, L.L.; Schmidt, J.; Smith, M.

1980-01-01

The idea of using saturable reactors as the basis of high power pulse generators is not a new concept, but there have been few recent applications of this technology. Here the principle of magnetic pulse generation is briefly described and some of the basic guidelines used to design these circuits are discussed. A demonstration of the principles by a small scale pulse amplifier is presented, and finally there is an extrapolation to a large scale system

Universal Huygens's principle of synchronization and coordination in the DNA and cell molecules

International Nuclear Information System (INIS)

Gareev, F.A.; Gareeva, G.F.

2001-01-01

Full text: Many objects in Nature - elementary particles, nuclei, atoms, molecules, DNA, proteins, etc. are build as self-consistent hierarchical systems and have the same homological construction in the sense that they are found by the same fundamental physical laws: energy-momentum conservation law and sectoral conservation law (the second Kepler law). Schroedinger wrote that an interaction between microscopic physical objects is controlled by specific resonance laws. According to these laws any interaction in a microscopic hierarchic wave system exhibits the resonance character. Due to above said the corresponding partial motion are determinate. This determinism arises as a consequences of the energy conservation law. As the resonance condition arises from the fundamental energy conservation law, the rhythms and synchronization of the majority of phenomena to be observed are the reflection of the universal property of self-organization of the Universe. The Huygens synchronization principle is substantiated at the microscopic level as the consequence of energy conservation law and resonance character of any interaction between wave systems. In this paper we demonstrated the universality of the Huygens synchronization principle independent of substance, fields, and interactions for microsystems. Thereby, webbing some arguments in favor of the mechanism - ORDER from ORDER, declared by Schrodinger is fundamental problem of contemporary science. We came to conclusion that a stable proton and neutron play the role of standard for other elementary particles and nuclei. They contain all necessary information about structure of other particles and nuclei. This information is used and reproduced by simple rational relations, according to the fundamental conservation law of energy momentum. We originated from the principles of commensurability and self-similarity. The commensurability and self-similarity result in the very unity of the world. The principle of

Design and evaluation of an integrated safeguards system: principles

International Nuclear Information System (INIS)

Markin, J.T.; Coulter, C.A.; Gutmacher, R.G.; Whitty, W.J.

1984-01-01

An integrated safeguards system is defined as a collection of safeguards activities in which system components are coordinated to meet safeguards objectives efficiently within constraints imposed by safeguards resources, facility operations, potential adversaries, and regulatory requirements. This paper describes principles for designing and evaluating an integrated safeguards system that consists of four parts: a problem definition phase that specifies resources and constraints composing the problem boundary values, a system analysis/synthesis phase that describes how to select and integrate safeguards activities for efficient attainment of system objectives, a system evaluation/optimization phase that defines measures of safeguards performance and develops methods for evaluating them, and a decision-making phase that develops principles for selecting admissible designs and preference-ordering designs

A proposed power assisted system of manual wheelchair based on universal design for eldery

Science.gov (United States)

Susmartini, Susy; Pryadhitama, Ilham; Herdiman, Lobes; Wahyufitriani, Cindy

2017-11-01

Difficulties in walking is high percentage case in the limitations mobility of the elderly. An assisted technology commonly used to help the elderly who have walking difficulty is a manual wheelchair. However, the elderly frequently experiences difficulties in operating manual wheelchair due to gradually degradation of their physical condition. Preliminary study results showed that the average grip strength of the hands of seven elderly subjects was 13.8 ± 6.96 kg and the value is relatively weak. In addition, the mean maximum speed of 7 elderly subjects when doing to round the wheelchair is 0.6 ± 0.2m / s. This value is only 56.4% compared with an average speed of 20-23-year age group (8 males), which is 1.1 ± 0.1 m / s. This shows that the elderly who have walking difficulty have low grip strength and speed in operating a wheelchair. On the other hand, manual wheelchairs suffer an inadequate technology solution to solve the problem. Therefore, an assistive technology is proposed to create mobility aid to accommodate the elderly needs. One approach used is Universal Design. This paper proposes a system of intervention in the manual wheelchair through the 7 principles of Universal Design approach. The preliminary principle has not been able to accommodate the needs of the elderly will become a reference in the proposed design of this study.

Inclusive college teaching: universal design for instruction and diverse learners

Directory of Open Access Journals (Sweden)

Joan M. McGuire

2011-11-01

Full Text Available Shifts in enrollment patterns are affecting college classrooms and elements of teaching ranging from options for delivering course materials online to multiple methods of assessing learning. With the enrollment of more diverse college learners comes a call to intentionally design instruction that is more inclusive and responsive to multiple learning styles. The notion of Universal Design for Instruction (UDI is examined from its roots in the architectural field to its application as a model for teaching that anticipates diversity including students with disabilities. Principles of UDI are defined, and pedagogical examples are provided. Several implementation projects based on the UDI concept are described as are preliminary results regarding outcomes. Substantive issues are identified that have bearing on the direction this innovative idea will take over the next several years.

Design principles of a web interface for monitoring tools

International Nuclear Information System (INIS)

Aiftimiei, C; Pra, S D; Fantinel, S; Andreozzi, S; Fattibene, E; Misurelli, G; Cuscela, G; Donvito, G; Dudhalkar, V; Maggi, G; Pierro, A

2008-01-01

A monitoring tool of a complex Grid system can gather a huge amount of information that have to be presented to the users in the most comprehensive way. Moreover different types of consumers could be interested in inspecting and analyzing different subsets of data. The main goal in designing a Web interface for the presentation of monitoring information is to organize the huge amount of data in a simple, user-friendly and usable structure. One more problem is to consider different approaches, skills and interests that all the possible categories of users have in looking for the desired information. Starting from the Information Architecture guidelines for the Web, it is possible to design Web interfaces towards a closer user experience and to deal with an advanced user interaction through the implementation of many Web standard technologies. In this paper, we will present a number of principles for the design of Web interface for monitoring tools that provide a wider, richer range of possibilities for what concerns the user interaction. These principles are based on an extensive review of the current literature in Web design and on the experience with the development of the GridICE monitoring tool. The described principles can drive the evolution of the Web interface of Grid monitoring tools

Implementation of the non-flutter design principle

DEFF Research Database (Denmark)

Andersen, Michael Styrk; Sahin, Emrah; Laustsen, Benjamin

2014-01-01

The non-flutter design principle is introduced. Aerodynamically stable section model tests performed by three different research groups indicate, that flutter might be avoided if the torsional-to-vertical frequency ratio is kept below 1. A case study of a suspension bridge spanning 3:7 km...

Towards Universal Design Hotels in Denmark.

Science.gov (United States)

Grangaard, Sidse

2016-01-01

Based on the research project 'Accessible Hotel Rooms' that studies the balance between the experience of supply and demand regarding accessibility features in Danish hotel rooms, this paper demonstrates factors having an influence on Universal Design hotels in Denmark. The research project was financed by the Danish Transport and Construction Agency. Different notions in the hotel sector of the current supply and demand for Universal Design hotel rooms are identified, as well as future demand. Despite supplying accessible rooms, some hotels do not advertise their accessibility features on their website. There exists an attitude in the hotel sector that functions as a barrier for Universal Design: if there are enough guests, for example business travellers, then why market the hotel on Universal Design? The paper points out the coherence between the understanding of the users and the view of demand. Another important factor is Corporate Social Responsibility, which can be regarded as a strategy or platform towards Universal Design hotels.

Applying principles of Design For Assembly to ITER maintenance operations

International Nuclear Information System (INIS)

Heemskerk, Cock; de Baar, Marco; Elzendoorn, Ben; Koning, Jarich; Verhoeven, Toon; Vreede, Fred de

2009-01-01

In ITER, maintenance operations in the vessel and in the Hot Cell will be largely done by Remote Handling (RH). Remotely performed maintenance actions tend to be more time-costly than actions performed by direct human access. With a human operator in the control loop and adequate situational feedback, a two-armed master slave manipulator system can mimic direct access with dexterous manipulation, tactile feedback and vision. But even then, turnaround times are still very high. Adapting the design for simplified maintenance operations can yield significant time savings. One of the methods known to produce a simpler, more robust design, which is also better suited for handling with robots, is Design For Assembly (DFA). This paper discusses whether and how the principles of DFA can be applied to simplify maintenance operations for ITER. While DFA is normally used with series-production and ITER is a unique product, it is possible to apply the principles of DFA to ITER maintenance operations. Furthermore, DFA's principles can be applied at different abstraction levels. Combining principles of DFA with Virtual Reality leads to new insights and provides additional value.

PROJECTING PRINCIPLES OF «MATHEMATICAL AND PHYSICAL BASICS IN INFORMATICS» MODULE AS PART OF A UNIVERSAL BACCALAUREATE PROGRAM

Directory of Open Access Journals (Sweden)

E. K. Samerkhanova

2016-01-01

Full Text Available This article is a presentation of “Mathematical and Physical Basics in Informatics” Module projected as part of universal baccalaureate model realized in Minin State Pedagogical University, Nizhny Novgorod, within the educational program for an extended group of qualifications “Informatics and Calculating Machines”. Module authors defined a strategy for baccalaureates preparation in the field of informational technology, which is realized due to a bunch of principles: education fundamentalization, learning systematization, activity, integration and student-centration. The principle of education fundamentalization requires consolidation of scientific and methodological preparation of students. The principle of learning systematization guarantees formation of students’ holistic ideology. The principle of integration is directed onto qualitative interdisciplinary conversion based on mutual enrichment of knowledge and skills. The principle of activity considers student personality, its formation and growth with respect to practical activity as a special form of psychical activity. The principle of student-centration is displayed as social-humanistic purpose of the educational process.

Two Eyes, 3D: Stereoscopic Design Principles

Science.gov (United States)

Price, Aaron; Subbarao, M.; Wyatt, R.

2013-01-01

Two Eyes, 3D is a NSF-funded research project about how people perceive highly spatial objects when shown with 2D or stereoscopic ("3D") representations. As part of the project, we produced a short film about SN 2011fe. The high definition film has been rendered in both 2D and stereoscopic formats. It was developed according to a set of stereoscopic design principles we derived from the literature and past experience producing and studying stereoscopic films. Study participants take a pre- and post-test that involves a spatial cognition assessment and scientific knowledge questions about Type-1a supernovae. For the evaluation, participants use iPads in order to record spatial manipulation of the device and look for elements of embodied cognition. We will present early results and also describe the stereoscopic design principles and the rationale behind them. All of our content and software is available under open source licenses. More information is at www.twoeyes3d.org.

Design of a Blended Learning Environment Based on Merrill’s Principles

Science.gov (United States)

Simarmata, Janner; Djohar, Asari; Purba, Janulis; Juanda, Enjang A.

2018-01-01

Designing blended learning courses requires a systematic approach, in instructional design decisions and implementations, instructional principles help educators not only to specify the elements of the course, but also to provide a solid base from which to build the technology. The blended learning course was designed based on Merrill’s First Principles of Instruction with five phases. This paper helps inform educators about how to develop appropriate learning styles and preferences according to students’ learning needs.

Design of a universal two-layered neural network derived from the PLI theory

Science.gov (United States)

Hu, Chia-Lun J.

2004-05-01

The if-and-only-if (IFF) condition that a set of M analog-to-digital vector-mapping relations can be learned by a one-layered-feed-forward neural network (OLNN) is that all the input analog vectors dichotomized by the i-th output bit must be positively, linearly independent, or PLI. If they are not PLI, then the OLNN just cannot learn no matter what learning rules is employed because the solution of the connection matrix does not exist mathematically. However, in this case, one can still design a parallel-cascaded, two-layered, perceptron (PCTLP) to acheive this general mapping goal. The design principle of this "universal" neural network is derived from the major mathematical properties of the PLI theory - changing the output bits of the dependent relations existing among the dichotomized input vectors to make the PLD relations PLI. Then with a vector concatenation technique, the required mapping can still be learned by this PCTLP system with very high efficiency. This paper will report in detail the mathematical derivation of the general design principle and the design procedures of the PCTLP neural network system. It then will be verified in general by a practical numerical example.

Toward Instructional Design Principles: Inducing Faraday's Law with Contrasting Cases

Science.gov (United States)

Kuo, Eric; Wieman, Carl E.

2016-01-01

Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory…

Experimental application of design principles in corrosion research

International Nuclear Information System (INIS)

Smyrl, W.H.; Pohlman, S.L.

1977-01-01

Experimental design criteria for corrosion investigations are based on established principles for systems that have uniform, or nearly uniform, corrosive attack. Scale-up or scale-down may be accomplished by proper use of dimensionless groups that measure the relative importance of interfacial kinetics, solution conductivity, and mass transfer. These principles have been applied to different fields of corrosion which include materials selection testing and protection; and to a specific corrosion problem involving attack of a substrate through holes in a protective overplate

10 CFR 435.6 - Sustainable principles for siting, design and construction. [Reserved

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Sustainable principles for siting, design and construction. [Reserved] 435.6 Section 435.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS...-Rise Residential Buildings. § 435.6 Sustainable principles for siting, design and construction...

10 CFR 433.6 - Sustainable principles for siting, design and construction. [Reserved

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Sustainable principles for siting, design and construction. [Reserved] 433.6 Section 433.6 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION ENERGY EFFICIENCY STANDARDS... BUILDINGS § 433.6 Sustainable principles for siting, design and construction. [Reserved] ...

Design and evaluation of an integrated safeguards system: principles

International Nuclear Information System (INIS)

Markin, J.T.; Coulter, C.A.; Gutmacher, R.G.; Whitty, W.J.

1984-07-01

An integrated safeguards system is defined as a collection of safeguards activities in which system components are coordinated to meet safeguards objectives efficiently within constraints imposed by safeguards resources, facility operations, potential adversaries, and regulatory requirements. This paper describes principles for designing and evaluating an integrated safeguards system that consists of four parts: (1) a problem definition phase that specifies resources and constraints composing the problem boundary values; (2) a system analysis/synthesis phase that describes how to select and integrate safeguards activities for efficient attainment of system objectives; (3) a system evaluation/optimization phase that defines measures of safeguards performance and develops methods for evaluating them; and (4) a decision-making phase that develops principles for selecting admissible designs and preference-ordering designs. 6 references, 4 figures, 5 tables

HIGH QUALITY ENVIRONMENTAL PRINCIPLES APPLIED TO THE ARCHITECTONIC DESIGN SELECTION PROCEDURE: THE NUTRE LAB CASE

Directory of Open Access Journals (Sweden)

Claudia Barroso Krause

2012-06-01

Full Text Available The need to produce more sustainable buildings has been influencing the design decisions all over the world. That’s why it is imperative, in Brazil, the development of strategies and method to aid the decision making during the design process, focused on high quality environmental. This paper presents a decision support tool based on the principles of sustainable construction developed by the Project, Architecture and Sustainability Research Group (GPAS of Federal University of Rio de Janeiro – Brazil. The methodology has been developed for the selection of a preliminary design of a laboratory to be built at Rio Technology Park at the University campus. The support provided by GPAS occurred in three stages: the elaboration of the Reference Guide for the competitors, the development of a methodology to evaluate the proposed solutions (based on environmental performance criteria and the assistance of the members of jury in the trial phase. The theoretical framework was based upon the concepts of the bioclimatic architecture, the procedures specified by the certification HQE® (Haute Qualité Environnementale and the method suggested by the ADDENDA® architecture office. The success of this experience points out the possibility to future application in similar cases.

Design Principles for E-Government Architectures

Science.gov (United States)

Sandoz, Alain

The paper introduces a holistic approach for architecting systems which must sustain the entire e-government activity of a public authority. Four principles directly impact the architecture: Legality, Responsibility, Transparency, and Symmetry leading to coherent representations of the architecture for the client, the designer and the builder. The approach enables to deploy multipartite, distributed public services, including legal delegation of roles and outsourcing of non mandatory tasks through PPP.

Safety principles and design management of Chashma Nuclear Power Plant

International Nuclear Information System (INIS)

Geng Qirui; Cheng Pingdong

1997-01-01

The basic safety consideration and detailed design principles in the design of Chashma Nuclear Power Plant is elaborated. The management within the frame setting up by 'safety culture' and 'quality culture'

The Elements and Principles of Design: A Baseline Study

Science.gov (United States)

Adams, Erin

2013-01-01

Critical to the discipline, both professionally and academically, are the fundamentals of interior design. These fundamentals include the elements and principles of interior design: the commonly accepted tools and vocabulary used to create and communicate successful interior environments. Research indicates a lack of consistency in both the…

From qualification design to training design using ECVET principles

International Nuclear Information System (INIS)

Ceclan, Mihail; Wastin, Franck

2017-01-01

The Joint Research Centre of European Commission was designated in 2009 as Operating agent of European Human Resources Observatory - in Nuclear (EHRO@N). EHRO@N identified the nuclear sector's major challenges: to fill@in the 30 % gap between HR demand and supply in decommissioning and to adapt nuclear E and T system to comply more to the labour market demands. The process of nuclear training system adaptation to the labour market needs is based on the design of the flexible qualifications (unit based qualifications) using European Credit system for Vocational Education and Training (ECVET) principles. The process of ECVET implementation in the nuclear energy sector is ongoing since 2011 and is based on the strategy and road map developed by EHRO-N. The current paper presents the latest developments on the designing of training programs based on exit outcomes.

From qualification design to training design using ECVET principles

Energy Technology Data Exchange (ETDEWEB)

Ceclan, Mihail; Wastin, Franck [European Commission Joint Research Centre, Petten (Netherlands). Directorate Nuclear Safety and Security

2017-05-15

The Joint Research Centre of European Commission was designated in 2009 as Operating agent of European Human Resources Observatory - in Nuclear (EHRO@N). EHRO@N identified the nuclear sector's major challenges: to fill@in the 30 % gap between HR demand and supply in decommissioning and to adapt nuclear E and T system to comply more to the labour market demands. The process of nuclear training system adaptation to the labour market needs is based on the design of the flexible qualifications (unit based qualifications) using European Credit system for Vocational Education and Training (ECVET) principles. The process of ECVET implementation in the nuclear energy sector is ongoing since 2011 and is based on the strategy and road map developed by EHRO-N. The current paper presents the latest developments on the designing of training programs based on exit outcomes.

Applying Universal Design to Disability Service Provision: Outcome Analysis of a Universal Design (UD) Audit

Science.gov (United States)

Beck, Tanja; Diaz del Castillo, Patricia; Fovet, Frederic; Mole, Heather; Noga, Brodie

2014-01-01

This article presents out an outcome analysis of a Universal Design (UD) audit to the various professional facets of a disability service (DS) provider's office on a large North American campus. The context of the audit is a broad campus-wide drive to implement Universal Design for Learning (UDL) in teaching practices. In an effort for consistency…

Design principles for simulation games for learning clinical reasoning: A design-based research approach.

Science.gov (United States)

Koivisto, J-M; Haavisto, E; Niemi, H; Haho, P; Nylund, S; Multisilta, J

2018-01-01

Nurses sometimes lack the competence needed for recognising deterioration in patient conditions and this is often due to poor clinical reasoning. There is a need to develop new possibilities for learning this crucial competence area. In addition, educators need to be future oriented; they need to be able to design and adopt new pedagogical innovations. The purpose of the study is to describe the development process and to generate principles for the design of nursing simulation games. A design-based research methodology is applied in this study. Iterative cycles of analysis, design, development, testing and refinement were conducted via collaboration among researchers, educators, students, and game designers. The study facilitated the generation of reusable design principles for simulation games to guide future designers when designing and developing simulation games for learning clinical reasoning. This study makes a major contribution to research on simulation game development in the field of nursing education. The results of this study provide important insights into the significance of involving nurse educators in the design and development process of educational simulation games for the purpose of nursing education. Copyright © 2017 Elsevier Ltd. All rights reserved.

Design principles and operating principles: the yin and yang of optimal functioning.

Science.gov (United States)

Voit, Eberhard O

2003-03-01

Metabolic engineering has as a goal the improvement of yield of desired products from microorganisms and cell lines. This goal has traditionally been approached with experimental biotechnological methods, but it is becoming increasingly popular to precede the experimental phase by a mathematical modeling step that allows objective pre-screening of possible improvement strategies. The models are either linear and represent the stoichiometry and flux distribution in pathways or they are non-linear and account for the full kinetic behavior of the pathway, which is often significantly effected by regulatory signals. Linear flux analysis is simpler and requires less input information than a full kinetic analysis, and the question arises whether the consideration of non-linearities is really necessary for devising optimal strategies for yield improvements. The article analyzes this question with a generic, representative pathway. It shows that flux split ratios, which are the key criterion for linear flux analysis, are essentially sufficient for unregulated, but not for regulated branch points. The interrelationships between regulatory design on one hand and optimal patterns of operation on the other suggest the investigation of operating principles that complement design principles, like a user's manual complements the hardwiring of electronic equipment.

Cosmological principle

International Nuclear Information System (INIS)

Wesson, P.S.

1979-01-01

The Cosmological Principle states: the universe looks the same to all observers regardless of where they are located. To most astronomers today the Cosmological Principle means the universe looks the same to all observers because density of the galaxies is the same in all places. A new Cosmological Principle is proposed. It is called the Dimensional Cosmological Principle. It uses the properties of matter in the universe: density (rho), pressure (p), and mass (m) within some region of space of length (l). The laws of physics require incorporation of constants for gravity (G) and the speed of light (C). After combining the six parameters into dimensionless numbers, the best choices are: 8πGl 2 rho/c 2 , 8πGl 2 rho/c 4 , and 2 Gm/c 2 l (the Schwarzchild factor). The Dimensional Cosmological Principal came about because old ideas conflicted with the rapidly-growing body of observational evidence indicating that galaxies in the universe have a clumpy rather than uniform distribution

Equivalence principles and electromagnetism

Science.gov (United States)

Ni, W.-T.

1977-01-01

The implications of the weak equivalence principles are investigated in detail for electromagnetic systems in a general framework. In particular, it is shown that the universality of free-fall trajectories (Galileo weak equivalence principle) does not imply the validity of the Einstein equivalence principle. However, the Galileo principle plus the universality of free-fall rotation states does imply the Einstein principle.

Design principles for achieving integrated healthcare information systems.

Science.gov (United States)

Jensen, Tina Blegind

2013-03-01

Achieving integrated healthcare information systems has become a common goal for many countries in their pursuit of obtaining coordinated and comprehensive healthcare services. This article focuses on how a small local project termed 'Standardized pull of patient data' expanded and is now used on a large scale providing a majority of hospitals, general practitioners and citizens across Denmark with the possibility of accessing healthcare data from different electronic patient record systems and other systems. I build on design theory for information infrastructures, as presented by Hanseth and Lyytinen, to examine the design principles that facilitated this smallscale project to expand and become widespread. As a result of my findings, I outline three lessons learned that emphasize: (i) principles of flexibility, (ii) expansion from the installed base through modular strategies and (iii) identification of key healthcare actors to provide them with immediate benefits.

How bioethics principles can aid design of electronic health records to accommodate patient granular control.

Science.gov (United States)

Meslin, Eric M; Schwartz, Peter H

2015-01-01

Ethics should guide the design of electronic health records (EHR), and recognized principles of bioethics can play an important role. This approach was recently adopted by a team of informaticists who are designing and testing a system where patients exert granular control over who views their personal health information. While this method of building ethics in from the start of the design process has significant benefits, questions remain about how useful the application of bioethics principles can be in this process, especially when principles conflict. For instance, while the ethical principle of respect for autonomy supports a robust system of granular control, the principles of beneficence and nonmaleficence counsel restraint due to the danger of patients being harmed by restrictions on provider access to data. Conflict between principles has long been recognized by ethicists and has even motivated attacks on approaches that state and apply principles. In this paper, we show how using ethical principles can help in the design of EHRs by first explaining how ethical principles can and should be used generally, and then by discussing how attention to details in specific cases can show that the tension between principles is not as bad as it initially appeared. We conclude by suggesting ways in which the application of these (and other) principles can add value to the ongoing discussion of patient involvement in their health care. This is a new approach to linking principles to informatics design that we expect will stimulate further interest.

Implementing the Sustainable Development Goals at University Level

Science.gov (United States)

Albareda-Tiana, Silvia; Vidal-Raméntol, Salvador; Fernández-Morilla, Mónica

2018-01-01

Purpose: The purpose of this case study is to explore the principles and practices of sustainable development (SD) in the university curriculum. Design/methodology/approach: To explore the principles linked with the sustainable development goals (SDGs) and the learning and teaching practices in sustainability at the International University of…

Devising Principles of Design for Numeracy Tasks

Science.gov (United States)

Geiger, Vince; Forgasz, Helen; Goos, Merrilyn; Bennison, Anne

2014-01-01

Numeracy is a fundamental component of the Australian National Curriculum as a General Capability identified in each F-10 subject. In this paper, we consider the principles of design necessary for the development of numeracy tasks specific to subjects other than mathematics--in this case, the subject of English. We explore the nature of potential…

Design of a speed meter interferometer proof-of-principle experiment

International Nuclear Information System (INIS)

Gräf, C; Barr, B W; Bell, A S; Campbell, F; Cumming, A V; Gordon, N A; Hammond, G D; Hennig, J; Houston, E A; Huttner, S H; Jones, R A; Leavey, S S; Macarthur, J; Marwick, M; Rigby, S; Sorazu, B; Spencer, A; Danilishin, S L; Lück, H; Schilling, R

2014-01-01

The second generation of large scale interferometric gravitational wave (GW) detectors will be limited by quantum noise over a wide frequency range in their detection band. Further sensitivity improvements for future upgrades or new detectors beyond the second generation motivate the development of measurement schemes to mitigate the impact of quantum noise in these instruments. Two strands of development are being pursued to reach this goal, focusing both on modifications of the well-established Michelson detector configuration and development of different detector topologies. In this paper, we present the design of the world's first Sagnac speed meter (SSM) interferometer, which is currently being constructed at the University of Glasgow. With this proof-of-principle experiment we aim to demonstrate the theoretically predicted lower quantum noise in a Sagnac interferometer compared to an equivalent Michelson interferometer, to qualify SSM for further research towards an implementation in a future generation large scale GW detector, such as the planned Einstein telescope observatory. (paper)

Reconfigurable manufacturing systems: Principles, design, and future trends

Science.gov (United States)

Koren, Yoram; Gu, Xi; Guo, Weihong

2018-06-01

Reconfigurable manufacturing systems (RMSs), which possess the advantages of both dedicated serial lines and flexible manufacturing systems, were introduced in the mid-1990s to address the challenges initiated by globalization. The principal goal of an RMS is to enhance the responsiveness of manufacturing systems to unforeseen changes in product demand. RMSs are costeffective because they boost productivity, and increase the lifetime of the manufacturing system. Because of the many streams in which a product may be produced on an RMS, maintaining product precision in an RMS is a challenge. But the experience with RMS in the last 20 years indicates that product quality can be definitely maintained by inserting in-line inspection stations. In this paper, we formulate the design and operational principles for RMSs, and provide a state-of-the-art review of the design and operations methodologies of RMSs according to these principles. Finally, we propose future research directions, and deliberate on how recent intelligent manufacturing technologies may advance the design and operations of RMSs.

America's First Universal Design "Smart" Home

Science.gov (United States)

Schwab, Charles M.

2009-01-01

By providing a $20,000 tax credit for Universal Design (UD) housing, when new housing construction begins anew, the United States has a real opportunity to save hundreds of billions of dollars in long-term healthcare while encouraging long-term economic growth. Universal Design (also known as Inclusive Design or "Aging in Place" when referring to…

The Use of Operational Excellence Principles in a University Hospital.

Science.gov (United States)

Edelman, Eric R; Hamaekers, Ankie E W; Buhre, Wolfgang F; van Merode, Godefridus G

2017-01-01

The introduction of Operational Excellence in the Maastricht University Medical Center (MUMC+) has been the first of its kind and scale for a university hospital. The policy makers of the MUMC+ have combined different elements from various other business, management, and healthcare philosophies and frameworks into a unique mix. This paper summarizes the journey of developing this system and its most important aspects. Special attention is paid to the role of the operating rooms and the improvements that have taken place there, because of their central role in the working of the hospital. The MUMC+ is the leading tertiary healthcare center for the South-East region of The Netherlands and beyond. Regional, national, and international developments encouraged the MUMC+ to start significantly reorganizing its care processes from 2009 onward. First experiments with Lean Six Sigma and Business Modeling were combined with lessons learned from other centers around the world to form the MUMC+'s own type of Operational Excellence. At the time of writing, many improvement projects of different types have been successfully completed. Every single department in the hospital now uses Operational Excellence and design thinking in general as a method to develop new models of care. An evaluation in 2014 revealed several opportunities for improvement. A large number of projects were in progress, but 75% of all projects had not been completed, despite the first projects being initiated back in 2012. This led to a number of policy changes, mainly focusing on more intensive monitoring of projects and trying to do more improvement projects directly under the responsibility of the line manager. Focusing on patient value, continuous improvement, and the reduction of waste have proven to be very fitting principles for healthcare in general and specifically for application in a university hospital. Approaching improvement at a systems level while directly involving the people on the work

The Use of Operational Excellence Principles in a University Hospital

Directory of Open Access Journals (Sweden)

Eric R. Edelman

2017-07-01

Full Text Available The introduction of Operational Excellence in the Maastricht University Medical Center (MUMC+ has been the first of its kind and scale for a university hospital. The policy makers of the MUMC+ have combined different elements from various other business, management, and healthcare philosophies and frameworks into a unique mix. This paper summarizes the journey of developing this system and its most important aspects. Special attention is paid to the role of the operating rooms and the improvements that have taken place there, because of their central role in the working of the hospital. The MUMC+ is the leading tertiary healthcare center for the South-East region of The Netherlands and beyond. Regional, national, and international developments encouraged the MUMC+ to start significantly reorganizing its care processes from 2009 onward. First experiments with Lean Six Sigma and Business Modeling were combined with lessons learned from other centers around the world to form the MUMC+’s own type of Operational Excellence. At the time of writing, many improvement projects of different types have been successfully completed. Every single department in the hospital now uses Operational Excellence and design thinking in general as a method to develop new models of care. An evaluation in 2014 revealed several opportunities for improvement. A large number of projects were in progress, but 75% of all projects had not been completed, despite the first projects being initiated back in 2012. This led to a number of policy changes, mainly focusing on more intensive monitoring of projects and trying to do more improvement projects directly under the responsibility of the line manager. Focusing on patient value, continuous improvement, and the reduction of waste have proven to be very fitting principles for healthcare in general and specifically for application in a university hospital. Approaching improvement at a systems level while directly involving the

Design Principles of Next-Generation Digital Gaming for Education.

Science.gov (United States)

Squire, Kurt; Jenkins, Henry; Holland, Walter; Miller, Heather; O'Driscoll, Alice; Tan, Katie Philip; Todd, Katie.

2003-01-01

Discusses the rapid growth of digital games, describes research at MIT that is exploring the potential of digital games for supporting learning, and offers hypotheses about the design of next-generation educational video and computer games. Highlights include simulations and games; and design principles, including context and using information to…

Mechanical design of an electronic control unit using axiomatic principles

Directory of Open Access Journals (Sweden)

Cazacu Vlad

2017-01-01

Full Text Available If the engine of the car can be considered as the heart, then the E.C.U’s represents the brain of the car. Electronic control units (E.C.U’s are electronic devices which control the way different components of a car (engine, windows, airbags, etc. react in some situations (overheating, button pressed by a passenger, crash, etc.. Axiomatic design is a set of principles that theorizes the act of conceiving a new project. Based on two axiom this method comes into designers help, giving them the option to reach in a short period of time a fully functional and compliant product without supporting the design of the product on chance, past experiences or “try and fail” principle.

First principles design of a core bioenergetic transmembrane electron-transfer protein

Energy Technology Data Exchange (ETDEWEB)

Goparaju, Geetha; Fry, Bryan A.; Chobot, Sarah E.; Wiedman, Gregory; Moser, Christopher C.; Leslie Dutton, P.; Discher, Bohdana M.

2016-05-01

Here we describe the design, Escherichia coli expression and characterization of a simplified, adaptable and functionally transparent single chain 4-α-helix transmembrane protein frame that binds multiple heme and light activatable porphyrins. Such man-made cofactor-binding oxidoreductases, designed from first principles with minimal reference to natural protein sequences, are known as maquettes. This design is an adaptable frame aiming to uncover core engineering principles governing bioenergetic transmembrane electron-transfer function and recapitulate protein archetypes proposed to represent the origins of photosynthesis. This article is part of a Special Issue entitled Biodesign for Bioenergetics — the design and engineering of electronic transfer cofactors, proteins and protein networks, edited by Ronald L. Koder and J.L. Ross Anderson.

Computer-based teaching module design: principles derived from learning theories.

Science.gov (United States)

Lau, K H Vincent

2014-03-01

The computer-based teaching module (CBTM), which has recently gained prominence in medical education, is a teaching format in which a multimedia program serves as a single source for knowledge acquisition rather than playing an adjunctive role as it does in computer-assisted learning (CAL). Despite empirical validation in the past decade, there is limited research into the optimisation of CBTM design. This review aims to summarise research in classic and modern multimedia-specific learning theories applied to computer learning, and to collapse the findings into a set of design principles to guide the development of CBTMs. Scopus was searched for: (i) studies of classic cognitivism, constructivism and behaviourism theories (search terms: 'cognitive theory' OR 'constructivism theory' OR 'behaviourism theory' AND 'e-learning' OR 'web-based learning') and their sub-theories applied to computer learning, and (ii) recent studies of modern learning theories applied to computer learning (search terms: 'learning theory' AND 'e-learning' OR 'web-based learning') for articles published between 1990 and 2012. The first search identified 29 studies, dominated in topic by the cognitive load, elaboration and scaffolding theories. The second search identified 139 studies, with diverse topics in connectivism, discovery and technical scaffolding. Based on their relative representation in the literature, the applications of these theories were collapsed into a list of CBTM design principles. Ten principles were identified and categorised into three levels of design: the global level (managing objectives, framing, minimising technical load); the rhetoric level (optimising modality, making modality explicit, scaffolding, elaboration, spaced repeating), and the detail level (managing text, managing devices). This review examined the literature in the application of learning theories to CAL to develop a set of principles that guide CBTM design. Further research will enable educators to

Design Principles for Natural and Hybrid Ventilation

OpenAIRE

Heiselberg, Per

2000-01-01

For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation. The hybrid ventilation concepts, design challenges and principles are discussed and illustrated by four building examples.

Design Principles for Serious Video Games in Mathematics Education: From Theory to Practice

OpenAIRE

Konstantinos Chorianopoulos; Michail Giannakos

2014-01-01

There is growing interest in the employment of serious video games in science education, but there are no clear design principles. After surveying previous work in serious video game design, we highlighted the following design principles: 1) engage the students with narrative (hero, story), 2) employ familiar gameplay mechanics from popular video games, 3) engage students into constructive trial and error game-play and 4) situate collaborative learning. As illustrated examples we designed two...

A Case Study of Academic Writing Development Through Principled Versus Standard Clt Method at Binus University

Directory of Open Access Journals (Sweden)

Almodad Biduk Asmani

2013-10-01

Full Text Available The purpose of the research project is to investigate how far the academic writing skills of Binus University students can be developed through two conflicting CLT methods: standard and principled. The research project is expected to result in computer-animated format which can be used as one of the main tools in teaching and learning grammar at Binus University. The research project uses the qualitative approach, and thus uses verbal data. The research project involves two subject groups (experimental and control. The experimental group will receive the treatment of grammar learning by using the Principled CLT approach, while the control group receives the standard CLT approach. Survey is then conducted to the two groups so as to find out their comments on the two teaching methods. From the results of the questionnaires, it is found that Principled CLT method is favored for its knowledge and accuracy factors, while the Standard CLT is preferred for its fun and independence factors.   

PRINCIPLE OF THE ELECTRONIC EDUCATIONAL ENVIRONMENT SECURITY IN THE PROFESSIONAL TRAINING OF UNIVERSITY STUDENTS

Directory of Open Access Journals (Sweden)

Valery G. Tylets

2017-12-01

Full Text Available The article considers the problem of professional training of students in e-learning environment in accordance with the principle of security. The authors offer the essay technology of multiple difficulty levels. In the article the description of each level of technology proves its conformity to the positions of principle of security. The main methods of measurement performance were made by expert assessment and subjective scaling. The analysis of results of approbation of essay technology of multiple difficulty levels in the experimental sample showed an increase of objective and subjective indicators. Positive methodological and personal effects of the introduction of technology into the process of university education were identified, corresponding to the positions of principle of security. Methodical recommendations of application of technology were formulated.

Towards Universal Design Hotels in Denmark

DEFF Research Database (Denmark)

Grangaard, Sidse

2016-01-01

on their website. There exists an attitude in the hotel sector that functions as a barrier for Universal Design: if there are enough guests, for example business travellers, then why market the hotel on Universal Design? The paper points out the coherence between the understanding of the users and the view...

Design for Natural Breast Augmentation: The ICE Principle.

Science.gov (United States)

Mallucci, Patrick; Branford, Olivier Alexandre

2016-06-01

The authors' published studies have helped define breast beauty in outlining key parameters that contribute to breast attractiveness. The "ICE" principle puts design into practice. It is a simplified formula for inframammary fold incision planning as part of the process for determining implant selection and placement to reproduce the 45:55 ratio previously described as fundamental to natural breast appearance. The formula is as follows: implant dimensions (I) - capacity of the breast (C) = excess tissue required (E). The aim of this study was to test the accuracy of the ICE principle for producing consistent natural beautiful results in breast augmentation. A prospective analysis of 50 consecutive women undergoing primary breast augmentation by means of an inframammary fold incision with anatomical or round implants was performed. The ICE principle was applied to all cases to determine implant selection, placement, and incision position. Changes in parameters between preoperative and postoperative digital clinical photographs were analyzed. The mean upper pole-to-lower pole ratio changed from 52:48 preoperatively to 45:55 postoperatively (p principle for surgical planning in breast augmentation that attractive natural breasts may be achieved consistently and with precision. Therapeutic, IV.

The Process of Designing for Learning: Understanding University Teachers' Design Work

Science.gov (United States)

Bennett, Sue; Agostinho, Shirley; Lockyer, Lori

2017-01-01

Interest in how to support the design work of university teachers has led to research and development initiatives that include technology-based design-support tools, online repositories, and technical specifications. Despite these initiatives, remarkably little is known about the design work that university teachers actually do. This paper…

A Universal Design Approach to Government Service Delivery: The Case of ChileAtiende.

Science.gov (United States)

Sandoval, Leonardo

2016-01-01

A common challenge for government administrations that aim to improve the delivery of information and services to citizens is to go beyond a government-centred approach. By focusing on citizens and the needs of a wide range of citizens, Universal Design (UD) can help to increase the effectiveness, efficiency and satisfaction of government services. This paper examines the case of an internationally recognised Chilean government service delivery programme inspired by UD principles known as ChileAtiende ("ChileService"). A brief account of its creation and current status is provided.

Design criteria and principles for criticality detection and alarm systems

International Nuclear Information System (INIS)

Delafield, H.J.; Clifton, J.J.

1984-10-01

The report gives design principles and criteria for criticality detection and alarm systems based on earlier work and revised in the light of more recent experience. In particular, account is taken of the developments which have taken place in the field of radiation detection and in the understanding of the different types of criticality excursion. General guidance is given on the principles to apply in deciding upon the need for a criticality system. The characteristics of a criticality incident are described in terms of the minimum incident of concern, and the radiation field. Criteria for the threshold of detection of a criticality incident are then derived and the methods of detection considered. The selection and siting of criticality detectors is discussed, and design principles are given for alarm systems. Finally, testing and post-alarm procedures are outlined, followed by a summary of the principal recommendations. The supporting Appendices include a discussion of reliability and a summary of radiation detector characteristics. (author)

Human Systems Interface Design Methods Using Ecological Interface Design Principles

International Nuclear Information System (INIS)

Hong, Seung Kweon; Park, Jung Chul; Kim, Sun Su; Sim, Kwang Pyo; Yuk, Seung Yul; Choi, Jae Hyeon; Yoon, Seung Hyun

2009-12-01

The results of this study categorized into two parts. The first part is the guidelines for EID designs. The procedure to observe for EID design is composed of 6 steps; 1) to define a target system, 2) to make an abstraction hierarchy model, 3) to check the link structure among each components included in the layers of abstraction hierarchy model, 4) to transform information requirements to variables, 5) to make the graphs related to each variables, 6) to check the graphs by visual display design principles and heuristic rules. The second part is an EID design alternative for nuclear power plant. The EID for high level function represents the energy balance and energy flow in each loop of nuclear power plant. The EID for middle level function represents the performance indicators of each equipment involved in the all processes of changing from coolants to steam. The EID for low level function represents the values measured in each equipment such as temperature, pressure, water level and so on

Students’ Attitudes to Universal Design in Architecture Education

Directory of Open Access Journals (Sweden)

Helen Larkin

2016-12-01

Full Text Available It is widely recognised that the built environment can dramatically impact the participation and engagement of people with disability and diverse needs. It has therefore become necessary for architects and designers to consider these needs when working within their profession. The implementation of universal design teaching into architecture and design curriculum has been recognised as an important step in facilitating and enhancing the uptake of universal design during the design process. Using a quantitative approach, this study aimed to compare, contrast and explore the attitudes of two groups of architecture students to the universal design of built environments. One group had received education relating to diversity and universal design as part of a prior project while the other group had not received this content. Findings from this comparison demonstrated that overall, no significant differences between groups existed. However further investigation provided interesting insight and perspectives into student attitudes to universal design and potential influencers of these attitudes.

Pacific Canada's Rockfish Conservation Areas: using Ostrom's design principles to assess management effectiveness

Directory of Open Access Journals (Sweden)

Darienne Lancaster

2015-09-01

Full Text Available International declines in marine biodiversity have lead to the creation of marine protected areas and fishery reserve systems. In Canada, 164 Rockfish Conservation Areas (RCAs were implemented between 2003 and 2007 and now cover 4847.2 km² of ocean. These reserves were created in response to widespread concern from fishers and nongovernmental organizations about inshore rockfish (genus Sebastes population declines. We used the design principles for effective common-pool resource management systems, originally developed by Elinor Ostrom, to assess the social and ecological effectiveness of these conservation areas more than 10 years after their initial implementation. We assessed the relative presence or absence of each design principle within current RCA management. We found that 2 of the 11 design principles were moderately present in the recreational fishery. All other design principles were lacking for the recreational sector. We found that 2 design principles were fully present and 5 were moderately present in the commercial sector. Four design principles were lacking in the commercial sector. Based on this analysis, we highlight 4 main areas for management improvement: (1 create an education and outreach campaign to explain RCA rules, regulations, boundaries, and the need for marine conservation; (2 increase monitoring of users and resources to discourage noncompliance and gather the necessary data to create social buy-in for marine conservation; (3 encourage informal nested governance through stakeholder organizations for education and self-regulation (e.g. fisher to fisher; and (4 most importantly, create a formal, decadal RCA review process to gather stakeholder input and make amendments to regulations and RCA boundaries. This information can be used to inform spatial management systems both in Canada and internationally. This analysis also contributes to a growing literature on effectively scaling up small-scale management techniques

Integrating Quality Matters into Hybrid Course Design: A Principles of Marketing Case Study

Science.gov (United States)

Young, Mark R.

2014-01-01

Previous research supports the idea that the success of hybrid or online delivery modes is more a function of course design than delivery media. This article describes a case study of a hybrid Principles of Marketing course that implemented a comprehensive redesign based on design principles espoused by the Quality Matters Program, a center for…

The roles and uses of design principles for developing the trialogical approach on learning

Directory of Open Access Journals (Sweden)

Kari Kosonen

2011-12-01

Full Text Available In the present paper, the development and use of a specific set of pedagogical design principles in a large research and development project are analysed. The project (the Knowledge Practices Laboratory developed technology and a pedagogical approach to support certain kinds of collaborative knowledge creation practices related to the ‘trialogical' approach on learning. The design principles for trialogical learning are examined from three main developmental perspectives that were emphasised in the project: theory, pedagogy, and technology. As expected, the design principles had many different roles but not as straightforward or overarching as was planned. In their outer form they were more resistant to big changes than was expected but they were elaborated and specified during the process. How theories change in design-based research is discussed on the basis of the analysis. Design principles are usually seen as providing a bridge between theory and practice, but the present case showed that also complementary, more concrete frameworks are needed for bridging theory to practical pedagogical or technical design solutions.

Using principles of learning to inform language therapy design for children with specific language impairment.

Science.gov (United States)

Alt, Mary; Meyers, Christina; Ancharski, Alexandra

2012-01-01

Language treatment for children with specific language impairment (SLI) often takes months to achieve moderate results. Interventions often do not incorporate the principles that are known to affect learning in unimpaired learners. To outline some key findings about learning in typical populations and to suggest a model of how they might be applied to language treatment design as a catalyst for further research and discussion. Three main principles of implicit learning are reviewed: variability, complexity and sleep-dependent consolidation. After explaining these principles, evidence is provided as to how they influence learning tasks in unimpaired learners. Information is reviewed on principles of learning as they apply to impaired populations, current treatment designs are also reviewed that conform to the principles, and ways in which principles of learning might be incorporated into language treatment design are demonstrated. This paper provides an outline for how theoretical knowledge might be applied to clinical practice in an effort to promote discussion. Although the authors look forward to more specific details on how the principles of learning relate to impaired populations, there is ample evidence to suggest that these principles should be considered during treatment design. © 2012 Royal College of Speech and Language Therapists.

Cryostat design case studies, principles and engineering

CERN Document Server

2016-01-01

This book enables the reader to learn the fundamental and applied aspects of practical cryostat design by examining previous design choices and resulting cryostat performance. Through a series of extended case studies the book presents an overview of existing cryostat design covering a wide range of cryostat types and applications, including the magnet cryostats that comprise the majority of the Large Hadron Collider at CERN, space-borne cryostats containing sensors operating below 1 K, and large cryogenic liquid storage vessels. It starts with an introductory section on the principles of cryostat design including practical data and equations. This section is followed by a series of case studies on existing cryostats, describing the specific requirements of the cryostat, the challenges involved and the design choices made along with the resulting performance of the cryostat. The cryostat examples used in the studies are chosen to cover a broad range of cryostat applications and the authors of each case are ...

Engineering Design of an Adaptive Leg Prosthesis Using Biological Principles

DEFF Research Database (Denmark)

Lenau, Torben Anker; Dentel, Andy; Invarsdottir, Thorunn

2010-01-01

The biomimetic design process is explored through a design case: An adaptive leg prosthesis. The aim is to investigate if the biomimetic design process can be carried out with a minimum of biological knowledge and without using advanced design methods. In the design case biomimetic design was suc...... was successfully carried out using library search resulting in 14 biological analogies for the design problem 'shape adaption'. It is proposed that search results are handled using special cards describing the biological phenomena and the functional principles....

Design principles of water sensitive in settlement area on the river banks

Science.gov (United States)

Ryanti, E.; Hasriyanti, N.; Utami, W. D.

2018-03-01

This research will formulate the principle of designing settlement area of Kapuas River Pontianak with the approach of water sensitive concept of urban design (WSUD) the densely populated settlement area. By using a case study the approach that is a dense settlement area located on the banks of the river with literature study techniques to formulate the aspects considered and components that are set in the design, descriptive analysis with the rationalistic paradigm for identification characteristics of the settlement in the river banks areas with consideration of WSUD elements and formulate the principles of designing water-sensitive settlement areas. This research is important to do because the problems related to the water management system in the existing riverside settlement in Pontianak has not been maximal to do. So the primary of this research contains several objectives that will be achieved that is identifying the characteristics of riverside settlement area based on consideration of design aspects of the area that are sensitive to water and the principle of designing the area so that the existing problem structure will be formulated in relation to the community’s need for infrastructure in settlement environment and formulate and develop appropriate technology guidelines for integrated water management systems in riverside settlement areas and design techniques for water-sensitive settlements (WSUD).

Using Green Chemistry and Engineering Principles to Design ...

Science.gov (United States)

The concepts of green chemistry and engineering (GC&E) have been promoted as an effective qualitative framework for developing more sustainable chemical syntheses, processes, and material management techniques. This has been demonstrated by many theoretical and practical cases. In addition, there are several approaches and frameworks focused on demonstrating that improvements were achieved through GC&E technologies. However, the application of these principles is not always straightforward. We propose using systematic frameworks and tools that help practitioners when deciding which principles can be applied, the levels of implementation, prospective of obtaining simultaneous improvements in all sustainability aspects, and ways to deal with multiobjective problems. Therefore, this contribution aims to provide a systematic combination of three different and complementary design tools for assisting designers in evaluating, developing, and improving chemical manufacturing and material management systems under GC&E perspectives. The WAR Algorithm, GREENSCOPE, and SustainPro were employed for this synergistic approach of incorporating sustainability at early stages of process development. In this demonstration, simulated ammonia production is used as a case study to illustrate this advancement. Results show how to identify process design areas for improvements, key factors, multi-criteria decision-making solutions, and optimal tradeoffs. Finally, conclusions were pre

Universal Design and the Smart Home.

Science.gov (United States)

Pennick, Tim; Hessey, Sue; Craigie, Roland

2016-01-01

The related concepts of Universal Design, Inclusive Design, and Design For All, all recognise that no one solution will fit the requirements of every possible user. This paper considers the extent to which current developments in smart home technology can help to reduce the numbers of users for whom mainstream technology is not sufficiently inclusive, proposing a flexible approach to user interface (UI) implementation focussed on the capabilities of the user. This implies development of the concepts underlying Universal Design to include the development of a flexible inclusive support infrastructure, servicing the requirements of individual users and their personalised user interface devices.

A universal simulator for ecological models

DEFF Research Database (Denmark)

Holst, Niels

2013-01-01

Software design is an often neglected issue in ecological models, even though bad software design often becomes a hindrance for re-using, sharing and even grasping an ecological model. In this paper, the methodology of agile software design was applied to the domain of ecological models. Thus...... the principles for a universal design of ecological models were arrived at. To exemplify this design, the open-source software Universal Simulator was constructed using C++ and XML and is provided as a resource for inspiration....

Advocating School-University Partnership for Responsive Teacher Education and Classroom-based Curricula: Evidence from Teachers' Cognitions about Principles of Curriculum Design and Their Own Roles

Science.gov (United States)

Rahimi, Muhammad; Zhang, Lawrence Jun; Esfahani, Nasim Nasr

2016-01-01

This study investigated the differences between novice and experienced non-native English-speaking English-as-a-foreign-language (EFL) teachers' cognitions about EFL curriculum design principles and their own roles in designing an EFL curriculum. The challenge these teachers faced in their roles and the support system they needed were also…

Design Principles for Cell Phone Learning in EFL

Science.gov (United States)

Wang, Feihong

2010-01-01

Cell phone learning (C-learning), as an instructional approach, has been gaining more and more attention in the field of teaching English as a foreign language (EFL) in the last 10 years. While studies have proved C-learning an effective instructional approach in research settings, a review of literature indicates the lack of design principles to…

Elements and Principles of Design Posters. Teacher's Guide.

Science.gov (United States)

1996

This book accompanies a poster series and allows the teacher to pre-plan a lesson or activity for students with the objectives shown for each element or principle of design to be presented. Along with a black-and-white reproduction of each poster, major concepts are discussed. Suggested student activities relating to a particular element or…

AGROECOLOGY: PRINCIPLES AND STRATEGIES FOR THE DESIGN OF SUSTAINABLE AGROECOSYSTEMS

Directory of Open Access Journals (Sweden)

João Carlos Canuto

2017-04-01

Full Text Available The theme of this paper is the debate on principles and strategies for designing sustainable agricultural systems. The paper builds on a broad approach to principles, moving to the more specific approach to strategies and finalizing with a micro-scale perspective on the practice of drawings and the consequences of each possible option. The objective is first of all to put to the debate the dialectic between conceptual plurality and unity in Agroecology. The problem in focus is to situate more clearly what are sustainable agroecosystems and, as a consequence, how to connect principles and strategies to make them viable. Regarding the theoretical reference, we use the classic authors of Agroecology and some critical articles on the conceptual question. The methodology that gives foundation to the approach is based on the author's theoretical and practical experience, with a qualitative, subjective and intuitive character. The results are only the presentation of ideas in order to contribute to the conceptual debate now in vogue and also to glimpse, on a smaller scale, the practical issue of sustainable agroecosystems designs.

A study of usability principles and interface design for mobile e-books.

Science.gov (United States)

Wang, Chao-Ming; Huang, Ching-Hua

2015-01-01

This study examined usability principles and interface designs in order to understand the relationship between the intentions of mobile e-book interface designs and users' perceptions. First, this study summarised 4 usability principles and 16 interface attributes, in order to conduct usability testing and questionnaire survey by referring to Nielsen (1993), Norman (2002), and Yeh (2010), who proposed the usability principles. Second, this study used the interviews to explore the perceptions and behaviours of user operations through senior users of multi-touch prototype devices. The results of this study are as follows: (1) users' behaviour of operating an interactive interface is related to user prior experience; (2) users' rating of the visibility principle is related to users' subjective perception but not related to user prior experience; however, users' ratings of the ease, efficiency, and enjoyment principles are related to user prior experience; (3) the interview survey reveals that the key attributes affecting users' behaviour of operating an interface include aesthetics, achievement, and friendliness. This study conducts experiments to explore the effects of users’ prior multi-touch experience on users’ behaviour of operating a mobile e-book interface and users’ rating of usability principles. Both qualitative and quantitative data analyses were performed. By applying protocol analysis, key attributes affecting users’ behaviour of operation were determined.

Industrial and process furnaces principles, design and operation

CERN Document Server

Jenkins, Barrie

2014-01-01

Furnaces sit at the core of all branches of manufacture and industry, so it is vital that these are designed and operated safely and effi-ciently. This reference provides all of the furnace theory needed to ensure that this can be executed successfully on an industrial scale. Industrial and Process Furnaces: Principles, 2nd Edition provides comprehensive coverage of all aspects of furnace operation and design, including topics essential for process engineers and operators to better understand furnaces. This includes: the combustion process and its control, furnace fuels, efficiency,

Client Mobile Software Design Principles for Mobile Learning Systems

Directory of Open Access Journals (Sweden)

Qing Tan

2009-01-01

Full Text Available In a client-server mobile learning system, client mobile software must run on the mobile phone to acquire, package, and send student’s interaction data via the mobile communications network to the connected mobile application server. The server will receive and process the client data in order to offer appropriate content and learning activities. To develop the mobile learning systems there are a number of very important issues that must be addressed. Mobile phones have scarce computing resources. They consist of heterogeneous devices and use various mobile operating systems, they have limitations with their user/device interaction capabilities, high data communications cost, and must provide for device mobility and portability. In this paper we propose five principles for designing Client mobile learning software. A location-based adaptive mobile learning system is presented as a proof of concept to demonstrate the applicability of these design principles.

Graphic design of Japanese university symbols

Directory of Open Access Journals (Sweden)

Vorobyeva T. U.

2016-08-01

Full Text Available this article uses a semiotic and visual-cultural analysis of the Japanese leading universities branding. It is shown that the design of a corporate style of universities in Japan has historical roots and serves as the basis of the brand of the university as well as Japan in whole.

Operationalising the Lean principles in maternity service design using 3P methodology.

Science.gov (United States)

Smith, Iain

2016-01-01

The last half century has seen significant changes to Maternity services in England. Though rates of maternal and infant mortality have fallen to very low levels, this has been achieved largely through hospital admission. It has been argued that maternity services may have become over-medicalised and service users have expressed a preference for more personalised care. NHS England's national strategy sets out a vision for a modern maternity service that continues to deliver safe care whilst also adopting the principles of personalisation. Therefore, there is a need to develop maternity services that balance safety with personal choice. To address this challenge, a maternity unit in North East England considered improving their service through refurbishment or building new facilities. Using a design process known as the production preparation process (or 3P), the Lean principles of understanding user value, mapping value-streams, creating flow, developing pull processes and continuous improvement were applied to the design of a new maternity department. Multiple stakeholders were engaged in the design through participation in a time-out (3P) workshop in which an innovative pathway and facility for maternity services were co-designed. The team created a hybrid model that they described as "wrap around care" in which the Lean concept of pull was applied to create a service and facility design in which expectant mothers were put at the centre of care with clinicians, skills, equipment and supplies drawn towards them in line with acuity changes as needed. Applying the Lean principles using the 3P method helped stakeholders to create an innovative design in line with the aspirations and objectives of the National Maternity Review. The case provides a practical example of stakeholders applying the Lean principles to maternity services and demonstrates the potential applicability of the Lean 3P approach to design healthcare services in line with policy requirements.

Optimality principles in the regulation of metabolic networks

NARCIS (Netherlands)

Berkhout, J.; Bruggeman, F.J.; Teusink, B.

2012-01-01

One of the challenging tasks in systems biology is to understand how molecular networks give rise to emergent functionality and whether universal design principles apply to molecular networks. To achieve this, the biophysical, evolutionary and physiological constraints that act on those networks

Urban Principle of Water Sensitive Design in Kampung Kamboja at Pontianak City

Science.gov (United States)

Hasriyanti, N.; Ryanti, E.

2017-07-01

This study will define the design principles of settlement area banks of the Kapuas Pontianak to approach the concept of water sensitive urban design (WSUD) in densely populated residential areas. Using a case study of a region densely located on the banks of the river with engineering literature to formulate the aspects taken into consideration and the components are arranged in the design, analysis descriptive paradigm rationalistic to identify the characteristics of residential areas riverbank with consideration of elements WSUD and formulate design principles residential area that is sensitive to water. This research is important to do because of problems related to the water management system in the settlement bank of the river in the city of Pontianak do not maximize. So that the primacy of this study contains several objectives to be achieved is to identify the characteristics of the settlement area riverbanks under consideration aspects areas design that is sensitive to water and principle areas design that will formulate the structure of the existing problems related to the needs of the community infrastructure facilities infrastructure neighborhoods and formulate and create guidelines for appropriate technology for integrated water management systems in the residential area of the riverbank and engineering design for the settlements are sensitive to water (WSUD). The final aim of the study is expected to achieve water management systems in residential areas by utilizing the abundant rainwater availability by using LID (Low Impact Development) through the concept of urban design that sensitive water

Turning challenges into design principles: Telemonitoring systems for patients with multiple chronic conditions.

Science.gov (United States)

Sultan, Mehwish; Kuluski, Kerry; McIsaac, Warren J; Cafazzo, Joseph A; Seto, Emily

2018-01-01

People with multiple chronic conditions often struggle with managing their health. The purpose of this research was to identify specific challenges of patients with multiple chronic conditions and to use the findings to form design principles for a telemonitoring system tailored for these patients. Semi-structured interviews with 15 patients with multiple chronic conditions and 10 clinicians were conducted to gain an understanding of their needs and preferences for a smartphone-based telemonitoring system. The interviews were analyzed using a conventional content analysis technique, resulting in six themes. Design principles developed from the themes included that the system must be modular to accommodate various combinations of conditions, reinforce a routine, consolidate record keeping, as well as provide actionable feedback to the patients. Designing an application for multiple chronic conditions is complex due to variability in patient conditions, and therefore, design principles developed in this study can help with future innovations aimed to help manage this population.

Implantable biomedical microsystems design principles and applications

CERN Document Server

Bhunia, Swarup; Sawan, Mohamad

2015-01-01

Research and innovation in areas such as circuits, microsystems, packaging, biocompatibility, miniaturization, power supplies, remote control, reliability, and lifespan are leading to a rapid increase in the range of devices and corresponding applications in the field of wearable and implantable biomedical microsystems, which are used for monitoring, diagnosing, and controlling the health conditions of the human body. This book provides comprehensive coverage of the fundamental design principles and validation for implantable microsystems, as well as several major application areas. Each co

Computers as components principles of embedded computing system design

CERN Document Server

Wolf, Marilyn

2012-01-01

Computers as Components: Principles of Embedded Computing System Design, 3e, presents essential knowledge on embedded systems technology and techniques. Updated for today's embedded systems design methods, this edition features new examples including digital signal processing, multimedia, and cyber-physical systems. Author Marilyn Wolf covers the latest processors from Texas Instruments, ARM, and Microchip Technology plus software, operating systems, networks, consumer devices, and more. Like the previous editions, this textbook: Uses real processors to demonstrate both technology and tec

The new international certification and design principles

International Nuclear Information System (INIS)

Heijnen, W.H.P.M.; Heineman, H.

1995-01-01

ISO/TC 67 deals with standardization of Equipment for the Petroleum and Natural Gas Industries at a global level. The paper will provide the reader with insight in the Certification system as well as its link with Design. It will explain how the total process fits in the business structure of the Petroleum and Natural Gas Industry, with the focus on the emerging concepts such as partnering, turn key contracts, the developments in the EC and the need to reduce costs at a global basis. The paper will also address the topic of Design Principles based on the results of the study performed for ISO/TC 67. The paper will provide a framework that can be used by the industry in how to deal with issues such as, there shall the activity of the Operator be focused on when ordering equipment or services and how the manufacturer or service provider should prepare himself to become an equal partner with regard to the required equipment, service and its associated technology now and in the future. In the changing world with ever increasing focus on Health, Safety and Environment (HSE), the topic efficiency, technology, equipment performance and functionality should not be overlooked or been given less attention. The Certification and Design principles, implemented in standards, aim predominantly at Fitness for Purpose of equipment and/or services to regain the balance. A further aim is to limit consequential costs due to deficiencies in the broadest sense, allowing the Petroleum and Natural Gas Industry to produce oil and gas in a cost effective manner with the highest possible HSE targets

The Independence of Markov's Principle in Type Theory

DEFF Research Database (Denmark)

Coquand, Thierry; Mannaa, Bassel

2017-01-01

for the generic point of this model. Instead we design an extension of type theory, which intuitively extends type theory by the addition of a generic point of Cantor space. We then show the consistency of this extension by a normalization argument. Markov's principle does not hold in this extension......In this paper, we show that Markov's principle is not derivable in dependent type theory with natural numbers and one universe. One way to prove this would be to remark that Markov's principle does not hold in a sheaf model of type theory over Cantor space, since Markov's principle does not hold......, and it follows that it cannot be proved in type theory....

MiTEP's Collaborative Field Course Design Process Based on Earth Science Literacy Principles

Science.gov (United States)

Engelmann, C. A.; Rose, W. I.; Huntoon, J. E.; Klawiter, M. F.; Hungwe, K.

2010-12-01

Michigan Technological University has developed a collaborative process for designing summer field courses for teachers as part of their National Science Foundation funded Math Science Partnership program, called the Michigan Teacher Excellence Program (MiTEP). This design process was implemented and then piloted during two two-week courses: Earth Science Institute I (ESI I) and Earth Science Institute II (ESI II). Participants consisted of a small group of Michigan urban science teachers who are members of the MiTEP program. The Earth Science Literacy Principles (ESLP) served as the framework for course design in conjunction with input from participating MiTEP teachers as well as research done on common teacher and student misconceptions in Earth Science. Research on the Earth Science misconception component, aligned to the ESLP, is more fully addressed in GSA Abstracts with Programs Vol. 42, No. 5. “Recognizing Earth Science Misconceptions and Reconstructing Knowledge through Conceptual-Change-Teaching”. The ESLP were released to the public in January 2009 by the Earth Science Literacy Organizing Committee and can be found at http://www.earthscienceliteracy.org/index.html. Each day of the first nine days of both Institutes was focused on one of the nine ESLP Big Ideas; the tenth day emphasized integration of concepts across all of the ESLP Big Ideas. Throughout each day, Michigan Tech graduate student facilitators and professors from Michigan Tech and Grand Valley State University consistantly focused teaching and learning on the day's Big Idea. Many Earth Science experts from Michigan Tech and Grand Valley State University joined the MiTEP teachers in the field or on campus, giving presentations on the latest research in their area that was related to that Big Idea. Field sites were chosen for their unique geological features as well as for the “sense of place” each site provided. Preliminary research findings indicate that this collaborative design

Universal design and the challenge of diversity: reflections on the principles of UD, based on empirical research of people's mobility.

Science.gov (United States)

Winance, Myriam

2014-01-01

The author analyses some theoretical presuppositions of the Universal Design approach. She shows that it is based on two paradoxes: (1) it reduces diversity to the "universal", (2) it depends on an asymmetrical view of abilities and disabilities. The author suggests a way of changing this concept in order to take into account uniqueness and diversity, in order to allow the shaping of abilities. The data are taken from an ethnographical survey carried out between 2007 and 2009 made up of in-depth interviews with wheelchair users and their families. The interviews were analysed inductively using the Nvivo© programme. The mobility of people in wheelchairs, and their capacity to act, are linked to their particular experience and are the result of a process of adjustment and arrangement. This process involves specific and varied resources and leads to changes in the individuals, in their dis/abilites, but also in their perceptions. This analysis leads to a change in the question of policy. This question is no longer "how to include diversity using the definition of 'universal'", but "how to bring out and articulate this diversity, so as to vary the qualities of persons and the world in which they live". Implications for Rehabilitation "Inaccessibility" is analysed in terms of a discrepancy between the user and her/his environment and in terms of experience. Accessibility is analysed as a process of adjustment and practical arrangements between the person and her/his environment. The universalism of Universal Design is criticized in the way it tries to force the variety of users into the uniqueness of one materiality. Emphasis is put on diversity and the necessity of articulating this diversity in a plural world offering various resources that individuals can call upon to act, depending on what they are and on what they want to become.

LAWS AND PRINCIPLES OF UNIVERSAL VALUE IN SUSTAINABLE DEVELOPMENT INDICATORS ANALYSIS

Directory of Open Access Journals (Sweden)

Andreea CONSTANTINESCU

2014-11-01

Full Text Available Each extension of the scope of laws and principles that allow both mathematical and statistical remodeling as well as reaffirming the appropriateness of proven methods, stirs up a special study interest. The ever-expanding computational power of laws of power offers to the scientific universe possibility of new approach to the crucial relationship between quantity and quality, between micro and macro dimensions. Boosting broadening the use of quasi-universal value theories in research in order to deepen the analysis of sustainable development indicators can lead to a greater understanding of all aspects of this area and to facilitate understanding of the arguments which underlie any responsible decision making. This assumption underlies the logical conclusion that sustainability becomes even stronger as it benefits from scientific arguments support resulting from research. Although we have confined ourselves in drafting some coordinates for application of each method presented to particular issues of sustainable development, this research theme will be strengthened and pursued through appropriate extensive analysis.

PRINCIPLES OF DESIGNING THE CENTER FOR ADMINISTRATIVE SERVICES IN DNIPROPETROVS’K

Directory of Open Access Journals (Sweden)

PODOLYNNY S. I.

2016-01-01

Full Text Available Problem. Nowadays providing administrative services of good quality is considered to be one of the most important conditions for establishing firm and democratic relations between local authorities and population The work for creating municipal institutions using the principle of a "single window" is being fulfilled in Dnipropetrovs’k. Two pilot projects have been done at the Department of Architectural Engineering and Design (Prydniprovs’ka State Academy of Construction and Architecture. Objective. To demonstrate peculiarities of two project proposals for CAS comparing them with the recommendations of State Administration and basic principles formed while designing similar objects in foreign practice. Main part. Basic principles for creating the Center for Administrative Services (CAS were formulated regarding foreign experience and recommendations of State Administration. These principles are organized as three conceptual blocks: city-planning relevancy, functional arrangement, form making and artistic image peculiarities. CAS on the left bank of the river is situated on the territory that is being reconstructed at the moment. It is a functional and compositional landmark of social and administrative subcentre of the left bank. The Centre is designed in a 16-storey building with a build-in and build-on 2-floor block of the front-office. The front-office is designed for 121 working places and the back-office – for 440 ones. The general area of the front-office is 605 sq. m., the area of the back-office is 2130 sq. m. Artistic characteristics are designed according to traditional office planning schemes. CAS of the right bank is planned on a vacant site on Zaporiz’ke highway. Spacious parking lots are also provided on the territory. The building is positioned sideways on to the highway with its long axis. It can serve as a peculiar sign at the entrance to the city. The front-office is situated in a two-floor stylobate of the Center

The principles of design of a shallow disposal site for low and intermediate level radioactive wastes

International Nuclear Information System (INIS)

Holmes, R.E.

1985-01-01

This paper addresses the principles of design of a shallow disposal site for low and intermediate level radioactive wastes. The objective of the author is to review the need for shallow land disposal facilities in the UK and to propose design principles which will protect the public and operatives from excessive risk. It is not the intent of the author to present a detailed design of facility which will meet the design standards proposed although such a design is feasible and within the scope of currently available technology. The principles and standards proposed in this paper are not necessarily those of PPC Consultant Services Ltd. or NEI Waste Technologies Ltd. (author)

Design principles for robust oscillatory behavior.

Science.gov (United States)

Castillo-Hair, Sebastian M; Villota, Elizabeth R; Coronado, Alberto M

2015-09-01

Oscillatory responses are ubiquitous in regulatory networks of living organisms, a fact that has led to extensive efforts to study and replicate the circuits involved. However, to date, design principles that underlie the robustness of natural oscillators are not completely known. Here we study a three-component enzymatic network model in order to determine the topological requirements for robust oscillation. First, by simulating every possible topological arrangement and varying their parameter values, we demonstrate that robust oscillators can be obtained by augmenting the number of both negative feedback loops and positive autoregulations while maintaining an appropriate balance of positive and negative interactions. We then identify network motifs, whose presence in more complex topologies is a necessary condition for obtaining oscillatory responses. Finally, we pinpoint a series of simple architectural patterns that progressively render more robust oscillators. Together, these findings can help in the design of more reliable synthetic biomolecular networks and may also have implications in the understanding of other oscillatory systems.

A Review of Research on Universal Design Educational Models

Science.gov (United States)

Rao, Kavita; Ok, Min Wook; Bryant, Brian R.

2014-01-01

Universal design for learning (UDL) has gained considerable attention in the field of special education, acclaimed for its promise to promote inclusion by supporting access to the general curriculum. In addition to UDL, there are two other universal design (UD) educational models referenced in the literature, universal design of instruction (UDI)…

A Reply on Behalf of the Relativist to Mark Mason's Justification of Universal Ethical Principles

Science.gov (United States)

MacKenzie, Jim

2007-01-01

Mark Mason, in his "A Justification, After the Postmodern Turn, of Universal Ethical Principles and Educational Ideals" Educational Philosophy and Theory, 37 (2005), attempts to justify transcultural multiculturalism. In this paper I argue that he fails to refute moral relativism, and that multiculturalism as he interprets it is not morally…

Power electronics basics operating principles, design, formulas, and applications

CERN Document Server

Rozanov, Yuriy; Chaplygin, Evgeny; Voronin, Pavel

2015-01-01

Power Electronics Basics: Operating Principles, Design, Formulas, and Applications provides fundamental knowledge for the analysis and design of modern power electronic devices. This concise and user-friendly resource:Explains the basic concepts and most important terms of power electronicsDescribes the power assemblies, control, and passive components of semiconductor power switchesCovers the control of power electronic devices, from mathematical modeling to the analysis of the electrical processesAddresses pulse-width modulation, power quality control, and multilevel, modular, and multicell

Digital sonar design in underwater acoustics principles and applications

CERN Document Server

Li, Qihu

2012-01-01

"Digital Sonar Design in Underwater Acoustics Principles and Applications" provides comprehensive and up-to-date coverage of research on sonar design, including the basic theory and techniques of digital signal processing, basic concept of information theory, ocean acoustics, underwater acoustic signal propagation theory, and underwater signal processing theory. This book discusses the general design procedure and approaches to implementation, the design method, system simulation theory and techniques, sonar tests in the laboratory, lake and sea, and practical validation criteria and methods for digital sonar design. It is intended for researchers in the fields of underwater signal processing and sonar design, and also for navy officers and ocean explorers. Qihu Li is a professor at the Institute of Acoustics, Chinese Academy of Sciences, and an academician of the Chinese Academy of Sciences.

Zero Energy Buildings – Design Principles and Built Examples

DEFF Research Database (Denmark)

Designing a zero energy building is a complicated task, and in order to achieve good results it is necessary to include knowledge from a range of sources. Therefore, cooperation is required between different professions and between generalists and specialists from the very beginning of the process...... knowledge must be acquired, depending on the project in question. Through a cross-disciplinary approach to architecture and building design, and based on an integrated design process, this publication will: • introduce a number of design strategies and technologies which are particularly important...... for the development of zero energy houses. These strategies and technologies are illustrated through simple design principles and built examples • identify technical and architectural potentials and challenges related to design strategies of crucial importance to the development of zero energy houses • identify...

Design Principles for Serious Video Games in Mathematics Education: From Theory to Practice

Directory of Open Access Journals (Sweden)

Konstantinos Chorianopoulos

2014-09-01

Full Text Available There is growing interest in the employment of serious video games in science education, but there are no clear design principles. After surveying previous work in serious video game design, we highlighted the following design principles: 1 engage the students with narrative (hero, story, 2 employ familiar gameplay mechanics from popular video games, 3 engage students into constructive trial and error game-play and 4 situate collaborative learning. As illustrated examples we designed two math video games targeted to primary education students. The gameplay of the math video games embeds addition operations in a seamless way, which has been inspired by that of classic platform games. In this way, the students are adding numbers as part of popular gameplay mechanics and as a means to reach the video game objective, rather than as an end in itself. The employment of well-defined principles in the design of math video games should facilitate the evaluation of learning effectiveness by researchers. Moreover, educators can deploy alternative versions of the games in order to engage students with diverse learning styles. For example, some students might be motived and benefited by narrative, while others by collaboration, because it is unlikely that one type of serious video game might fit all learning styles. The proposed principles are not meant to be an exhaustive list, but a starting point for extending the list and applying them in other cases of serious video games beyond mathematics and learning.

A case study analysis of the application of design for manufacture principles by industrial design students

OpenAIRE

Marshall, R; Page, T

2016-01-01

This paper describes a case study evaluation of a module that engages students on product and industrial design programmes with the principles of Design for Manufacturing (DFM). The primary element of the module is to expose students to the constraints of a full design to manufacture process. The module explores the design of a small polymer promotional item, together with the means of mass producing that item. This is done through the process of injection moulding and students design an inje...

Seismic design principles for the German fast breeder reactor SNR2

International Nuclear Information System (INIS)

Rangette, A.M.; Peters, K.A.

1988-01-01

The leading aim of a seismic design is, besides protection against seismic impacts, not to enhance the overall risk in the absence of seismic vibrations and, secondly, to avoid competition between operational needs and a seismic structural design. This approach is supported by avoiding overconservatism in the assumption of seismic loads and in the calculation of the structural response. Accordingly the seismic principles are stated as follows: restriction to German or equivalent low seismicity sites with intensities (SSE) lower VIII at frequency lower than 10 -4 /year; best estimate of seismic input-data without further conservatism; no consideration of OBE. The structural design principles are: 1. The secondary character of the seismic excitation is explicitly accounted for; 2. Energy absorption is allowed for by ductility of materials and construction. Accordingly strain criteria are used for failure predictions instead of stress criteria. (author). 1 fig

Achieving integration in mixed methods designs-principles and practices.

Science.gov (United States)

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Bionic Design Methods - A practical approach

DEFF Research Database (Denmark)

Kepler, Jørgen Asbøll; Stokholm, Marianne Denise J.

2004-01-01

Nature has served as inspiration for product design throughout history. Applications range from poetic translations of form to utilization of primary functional principles. This paper describes a generally applicable design methodology for transforming natural functional principles to feasible...... product design. From a formulation of design demands, which need not necessarily be very precise, the approach continues with a study of natural objects (anaimals, plants) which are subject to the same demands. From this study, the working principle(s) are derived. This (these) are then clarified through...... illustrative models, which should be simplified as much as possible. The simplified principle may now be evaluated and transformed into practical design. The methodology is clarified through examples, taken from a series of extended workshops held atAalborg University ....

Architectural design of heterogeneous metallic nanocrystals--principles and processes.

Science.gov (United States)

Yu, Yue; Zhang, Qingbo; Yao, Qiaofeng; Xie, Jianping; Lee, Jim Yang

2014-12-16

CONSPECTUS: Heterogeneous metal nanocrystals (HMNCs) are a natural extension of simple metal nanocrystals (NCs), but as a research topic, they have been much less explored until recently. HMNCs are formed by integrating metal NCs of different compositions into a common entity, similar to the way atoms are bonded to form molecules. HMNCs can be built to exhibit an unprecedented architectural diversity and complexity by programming the arrangement of the NC building blocks ("unit NCs"). The architectural engineering of HMNCs involves the design and fabrication of the architecture-determining elements (ADEs), i.e., unit NCs with precise control of shape and size, and their relative positions in the design. Similar to molecular engineering, where structural diversity is used to create more property variations for application explorations, the architectural engineering of HMNCs can similarly increase the utility of metal NCs by offering a suite of properties to support multifunctionality in applications. The architectural engineering of HMNCs calls for processes and operations that can execute the design. Some enabling technologies already exist in the form of classical micro- and macroscale fabrication techniques, such as masking and etching. These processes, when used singly or in combination, are fully capable of fabricating nanoscopic objects. What is needed is a detailed understanding of the engineering control of ADEs and the translation of these principles into actual processes. For simplicity of execution, these processes should be integrated into a common reaction system and yet retain independence of control. The key to architectural diversity is therefore the independent controllability of each ADE in the design blueprint. The right chemical tools must be applied under the right circumstances in order to achieve the desired outcome. In this Account, after a short illustration of the infinite possibility of combining different ADEs to create HMNC design

Authentic tasks in higher education: Studying design principles for assessment

NARCIS (Netherlands)

van Keulen, H.; van den Berg, I.; Ramaekers, S.

2006-01-01

Students may benefit significantly from learning through authentic tasks. But how do we assess their learning outcomes, taking into account the specific characteristics of authentic tasks? In the second presentation of this symposium on design principles for authentic tasks we present and discuss

NASA universities advanced space design program, focus on nuclear engineering

International Nuclear Information System (INIS)

Lyon, W.F. III; George, J.A.; Alred, J.W.; Peddicord, K.L.

1987-01-01

In January 1985, the National Aeronautics and Space Administration (NASA), in affiliation with the Universities Space Research Association (USRA), inaugurated the NASA Universities Advanced Space Design Program. The purpose of the program was to encourage participating universities to utilize design projects for the senior and graduate level design courses that would focus on topics relevant to the nation's space program. The activities and projects being carried out under the NASA Universities Advanced Space Design Program are excellent experiences for the participants. This program is a well-conceived, well-planned effort to achieve the maximum benefit out of not only the university design experience but also of the subsequent summer programs. The students in the university design classes have the opportunity to investigate dramatic and new concepts, which at the same time have a place in a program of national importance. This program could serve as a very useful model for the development of university interaction with other federal agencies

Universality and Realistic Extensions to the Semi-Analytic Simulation Principle in GNSS Signal Processing

Directory of Open Access Journals (Sweden)

O. Jakubov

2012-06-01

Full Text Available Semi-analytic simulation principle in GNSS signal processing bypasses the bit-true operations at high sampling frequency. Instead, signals at the output branches of the integrate&dump blocks are successfully modeled, thus making extensive Monte Carlo simulations feasible. Methods for simulations of code and carrier tracking loops with BPSK, BOC signals have been introduced in the literature. Matlab toolboxes were designed and published. In this paper, we further extend the applicability of the approach. Firstly, we describe any GNSS signal as a special instance of linear multi-dimensional modulation. Thereby, we state universal framework for classification of differently modulated signals. Using such description, we derive the semi-analytic models generally. Secondly, we extend the model for realistic scenarios including delay in the feed back, slowly fading multipath effects, finite bandwidth, phase noise, and a combination of these. Finally, a discussion on connection of this semi-analytic model and position-velocity-time estimator is delivered, as well as comparison of theoretical and simulated characteristics, produced by a prototype simulator developed at CTU in Prague.

Web Interface Design Principles for Adults' Self-Directed Learning

Science.gov (United States)

Firat, Mehmet; Sakar, A. Nurhan; Kabakci Yurdakul, Isil

2016-01-01

One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of…

Development of safety principles for the design of future nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

The main purpose of this TECDOC is to propose updates to existing safety principles which could be used as a basis for developing safety principles for the design of future NPPs. Accordingly, this document is intended to be useful to reactor designers, owners, operators, researchers and regulators. It is also expected that this document can contribute to international harmonization of safety approaches, and that it will help ensure that future reactors will be designed worldwide to a high standard of safety. As such, these proposed updates are intended to provide general guidance which, if carefully and properly implemented, will result in reactor designs with enhanced safety characteristics beyond those currently in operation. This enhancement results from the fact that the proposals are derived from the lessons learned from more recent operational experience, R and D, design, testing, and analysis developed over the past decade or so, as well as from attempts to reflect the current trends in reactor design, such as the introduction of new technologies. 8 refs, 3 figs.

Development of safety principles for the design of future nuclear power plants

International Nuclear Information System (INIS)

1995-06-01

The main purpose of this TECDOC is to propose updates to existing safety principles which could be used as a basis for developing safety principles for the design of future NPPs. Accordingly, this document is intended to be useful to reactor designers, owners, operators, researchers and regulators. It is also expected that this document can contribute to international harmonization of safety approaches, and that it will help ensure that future reactors will be designed worldwide to a high standard of safety. As such, these proposed updates are intended to provide general guidance which, if carefully and properly implemented, will result in reactor designs with enhanced safety characteristics beyond those currently in operation. This enhancement results from the fact that the proposals are derived from the lessons learned from more recent operational experience, R and D, design, testing, and analysis developed over the past decade or so, as well as from attempts to reflect the current trends in reactor design, such as the introduction of new technologies. 8 refs, 3 figs

Babinet principle applied to the design of metasurfaces and metamaterials.

Science.gov (United States)

Falcone, F; Lopetegi, T; Laso, M A G; Baena, J D; Bonache, J; Beruete, M; Marqués, R; Martín, F; Sorolla, M

2004-11-05

The electromagnetic theory of diffraction and the Babinet principle are applied to the design of artificial metasurfaces and metamaterials. A new particle, the complementary split rings resonator, is proposed for the design of metasurfaces with high frequency selectivity and planar metamaterials with a negative dielectric permittivity. Applications in the fields of frequency selective surfaces and polarizers, as well as in microwave antennas and filter design, can be envisaged. The tunability of all these devices by an applied dc voltage is also achievable if these particles are etched on the appropriate substrate.

Applying design principles to fusion reactor configurations for propulsion in space

International Nuclear Information System (INIS)

Carpenter, S.A.; Deveny, M.E.; Schulze, N.R.

1993-01-01

The application of fusion power to space propulsion requires rethinking the engineering-design solution to controlled-fusion energy. Whereas the unit cost of electricity (COE) drives the engineering-design solution for utility-based fusion reactor configurations; initial mass to low earth orbit (IMLEO), specific jet power (kW(thrust)/kg(engine)), and reusability drive the engineering-design solution for successful application of fusion power to space propulsion. Three design principles (DP's) were applied to adapt and optimize three candidate-terrestrial-fusion-reactor configurations for propulsion in space. The three design principles are: provide maximum direct access to space for waste radiation, operate components as passive radiators to minimize cooling-system mass, and optimize the plasma fuel, fuel mix, and temperature for best specific jet power. The three candidate terrestrial fusion reactor configurations are: the thermal barrier tandem mirror (TBTM), field reversed mirror (FRM), and levitated dipole field (LDF). The resulting three candidate space fusion propulsion systems have their IMLEO minimized and their specific jet power and reusability maximized. A preliminary rating of these configurations was performed, and it was concluded that the leading engineering-design solution to space fusion propulsion is a modified TBTM that we call the Mirror Fusion Propulsion System (MFPS)

Global ethics and principlism.

Science.gov (United States)

Gordon, John-Stewart

2011-09-01

This article examines the special relation between common morality and particular moralities in the four-principles approach and its use for global ethics. It is argued that the special dialectical relation between common morality and particular moralities is the key to bridging the gap between ethical universalism and relativism. The four-principles approach is a good model for a global bioethics by virtue of its ability to mediate successfully between universal demands and cultural diversity. The principle of autonomy (i.e., the idea of individual informed consent), however, does need to be revised so as to make it compatible with alternatives such as family- or community-informed consent. The upshot is that the contribution of the four-principles approach to global ethics lies in the so-called dialectical process and its power to deal with cross-cultural issues against the background of universal demands by joining them together.

Semiconductor-inspired design principles for superconducting quantum computing.

Science.gov (United States)

Shim, Yun-Pil; Tahan, Charles

2016-03-17

Superconducting circuits offer tremendous design flexibility in the quantum regime culminating most recently in the demonstration of few qubit systems supposedly approaching the threshold for fault-tolerant quantum information processing. Competition in the solid-state comes from semiconductor qubits, where nature has bestowed some very useful properties which can be utilized for spin qubit-based quantum computing. Here we begin to explore how selective design principles deduced from spin-based systems could be used to advance superconducting qubit science. We take an initial step along this path proposing an encoded qubit approach realizable with state-of-the-art tunable Josephson junction qubits. Our results show that this design philosophy holds promise, enables microwave-free control, and offers a pathway to future qubit designs with new capabilities such as with higher fidelity or, perhaps, operation at higher temperature. The approach is also especially suited to qubits on the basis of variable super-semi junctions.

Principles and Procedures for Self-Access Materials

OpenAIRE

Brian Tomlinson

2010-01-01

Like all language learning materials, self-access materials need to be developed from principles driven by what is known about the needs and wants of the target users. In my view, there should be a specification of universal principles, delivery specific principles, and local principles before deciding what self-access materials to develop and how to develop them. Universal principles are principles of language acquisition and development (Tomlinson, 2007a) which are applicable to all learner...

Design Principles for Improving the Process of Publishing Open data

NARCIS (Netherlands)

Zuiderwijk, A.M.G.; Janssen, M.F.W.H.A.; Choenni, R.; Meijer, R.F.

2014-01-01

· Purpose: Governments create large amounts of data. However, the publication of open data is often cumbersome and there are no standard procedures and processes for opening data. This blocks the easy publication of government data. The purpose of this paper is to derive design principles for

Design principle and structure of the ANI data centre

International Nuclear Information System (INIS)

Akopov, N.Z.; Arutyunyan, S.Kh.; Chilingaryan, A.A.; Galfayan, S.Kh.; Matevosyan, V.Kh.; Zazyan, M.Z.

1985-01-01

The design principles and structure of applied statistical programms used for processing the data from the ANI experiments are described. Nonparametric algorithms provide development of high-efficient method for simultaneous analysis of computerized and experimental data, from cosmic ray experiments. Relation data base for unified data storage, protection, renewing and erasuring as well as for fast and convenient information retrieval is considered

How Juries Assess Universal Design in Norwegian Architectural School Competitions.

Science.gov (United States)

Houck, Leif D

2016-01-01

This paper investigates how architectural school competition juries assess Universal Design. The method used is a case study of 18 recent architectural school competitions in Norway. The results show that most competition briefs ask for Universal Designed buildings. In 8 of the 18 cases, Universal Design is mentioned as an assessment criterion. In 11 of the 18 cases, Universal Design is commented on by the juries in the jury reports, but only in 3 of the cases, do the juries assess this aspect consistently on every competition project. The overall impression is that some amount of uncertainty looms concerning how Universal Design should be assessed in the competition stage. Based on the findings, future juries should concentrate on orientation and overview prior to technicalities and details.

Situating universal design architecture: designing with whom?

Science.gov (United States)

Jones, Paul

2014-01-01

To respond to growing calls for a theoretical unpacking of Universal Design (UD), a disparate movement cohering around attempts to design spaces and technologies that seek to allow use by all people (to the fullest extent possible). The on-going embedding of UD into architectural practice and pedagogy represents an opportune juncture at which to draw learning from other distinct-but-related transformatory architectural movements. Sociological-theoretical commentary. UD has to date, and necessarily, been dominated by the practice contexts from which it emerged. Appealing as a short-hand for description of "designing-for-all", in most cases UD has come to stand in as a term to signal a general intent in this direction and as an umbrella term for the range of technical design resources that have been developed under these auspices. There remains a fundamental ambivalence vis-à-vis the question of users' power/capacity to influence decision-making in the design process in UD; technically-oriented typologies of bodies predominate in influential UD architectural accounts. UD represents rich technical and pedagogical resources for those architects committed to transforming the existing built environment so as to be less hostile to a wide range of users. However, within UD, unpacking the social role of the professional architect vis-à-vis a variety of publics is an important, but hitherto underdeveloped, challenge; issues concerning professional-citizen power relations continue to animate parallel architectural politics, and UD can both contribute and draw much from these on-going explorations. Implications for Rehabilitation Universal Design (UD) architecture shares a close affinity with rehabilitation practice, with the creation of built environments that allow use by individuals with a wide range of capacities a priority for both. While an effective communicative "bridge" between professions, UD's deployment typically leaves unspoken the capacity of users to

Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

Science.gov (United States)

Chiu, Thomas K. F.; Churchill, Daniel

2016-01-01

Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

Autonomous Reactivity Control (ARC) — Principles, geometry and design process

Energy Technology Data Exchange (ETDEWEB)

Qvist, Staffan A., E-mail: staffan.qvist@physics.uu.se [Department of Physics and Astronomy, Uppsala University, Uppsala (Sweden); Department of Nuclear Engineering, University of California Berkeley (United States); Hellesen, Carl [Department of Physics and Astronomy, Uppsala University, Uppsala (Sweden); Thiele, Roman [Division of Reactor Technology, Royal Institute of Technology, Stockholm (Sweden); Dubberley, Allen E. [General Electric Advanced Reactor Systems Department (retired), Sunnyvale, CA (United States); Gradecka, Malwina; Greenspan, Ehud [Department of Nuclear Engineering, University of California Berkeley (United States)

2016-10-15

Highlights: • Here we define the principles of the operation and design of ARC systems. • ARC systems can provide inherent safety during and following unprotected transients. • A manufacturing and assembly method was developed and presented. - Abstract: The Autonomous Reactivity Control (ARC) system was developed to ensure inherent safety performance of Generation-IV reactors while having a minimal impact on reactor performance and economic viability. Here we present in detail the principles of how the ARC system operates, what materials should be used, what components make up the system and how they are interconnected. The relevant equations regarding how to design the system for a certain response are developed and defined, and the most important aspects determining the speed of actuation of the systems are analyzed. Thus, this study serves as the general reference material for all of the fundamental principles behind the ARC idea. Finally, we present a step-by-step guide to how a fast reactor fuel subassembly with an ARC system installed would be manufactured, using a full 3D-CAD model. For an ARC installation in a 1000 MWth sodium-cooled oxide-fueled fast reactor core, the system constitutes a relatively minor adjustment to a typical fuel assembly, increasing its total axial extent by ∼5–10% and the total primary coolant pressure drop by ∼1%. The main finding of this study is that it is possible to design, manufacture (using existing methods) and implement ARC systems in the fuel assemblies of fast reactor cores to provide inherent safety in all anticipated unprotected transients with only a modest increase in the length of the assembly and the pressure drop across the core.

Cosmological implications of Heisenberg's principle

CERN Document Server

Gonzalo, Julio A

2015-01-01

The aim of this book is to analyze the all important implications of Heisenberg's Uncertainty Principle for a finite universe with very large mass-energy content such as ours. The earlier and main contributors to the formulation of Quantum Mechanics are briefly reviewed regarding the formulation of Heisenberg's Principle. After discussing “indeterminacy” versus ”uncertainty”, the universal constants of physics are reviewed and Planck's units are given. Next, a novel set of units, Heisenberg–Lemaitre units, are defined in terms of the large finite mass of the universe. With the help of Heisenberg's principle, the time evolution of the finite zero-point energy for the universe is investigated quantitatively. Next, taking advantage of the rigorous solutions of Einstein's cosmological equation for a flat, open and mixed universe of finite mass, the most recent and accurate data on the “age” (to) and the expansion rate (Ho) of the universe and their implications are reconsidered.

Universities' Intermediary Role in the "Design for Sustainability" Field

Science.gov (United States)

Küçüksayraç, Elif; Wever, Renee; Brezet, Han

2017-01-01

Purpose: This paper aims to investigate the intermediary role of universities in spreading design for sustainability into industry. Design/methodology/approach: Three case studies were undertaken on Delft University of Technology, Design for Sustainability Program from The Netherlands; a center on sustainable consumption and production; and Prof.…

Optimal Input Design for Aircraft Parameter Estimation using Dynamic Programming Principles

Science.gov (United States)

Morelli, Eugene A.; Klein, Vladislav

1990-01-01

A new technique was developed for designing optimal flight test inputs for aircraft parameter estimation experiments. The principles of dynamic programming were used for the design in the time domain. This approach made it possible to include realistic practical constraints on the input and output variables. A description of the new approach is presented, followed by an example for a multiple input linear model describing the lateral dynamics of a fighter aircraft. The optimal input designs produced by the new technique demonstrated improved quality and expanded capability relative to the conventional multiple input design method.

Universal Health Coverage and the Right to Health: From Legal Principle to Post-2015 Indicators.

Science.gov (United States)

Sridhar, Devi; McKee, Martin; Ooms, Gorik; Beiersmann, Claudia; Friedman, Eric; Gouda, Hebe; Hill, Peter; Jahn, Albrecht

2015-01-01

Universal Health Coverage (UHC) is widely considered one of the key components for the post-2015 health goal. The idea of UHC is rooted in the right to health, set out in the International Covenant on Economic, Social, and Cultural Rights. Based on the Covenant and the General Comment of the Committee on Economic, Social, and Cultural Rights, which is responsible for interpreting and monitoring the Covenant, we identify 6 key legal principles that should underpin UHC based on the right to health: minimum core obligation, progressive realization, cost-effectiveness, shared responsibility, participatory decision making, and prioritizing vulnerable or marginalized groups. Yet, although these principles are widely accepted, they are criticized for not being specific enough to operationalize as post-2015 indicators for reaching the target of UHC. In this article, we propose measurable and achievable indicators for UHC based on the right to health that can be used to inform the ongoing negotiations on Sustainable Development Goals. However, we identify 3 major challenges that face any exercise in setting indicators post-2015: data availability as an essential criterion, the universality of targets, and the adaptation of global goals to local populations. © SAGE Publications 2015.

Zero Energy Buildings – Design Principles and Built Examples

DEFF Research Database (Denmark)

Bejder, Anne Kirkegaard; Knudstrup, Mary-Ann; Jensen, Rasmus Lund

Designing a zero energy building is a complicated task, and in order to achieve good results it is necessary to include knowledge from a range of sources. Therefore, cooperation is required between different professions and between generalists and specialists from the very beginning of the process...... for the development of zero energy houses. These strategies and technologies are illustrated through simple design principles and built examples • identify technical and architectural potentials and challenges related to design strategies of crucial importance to the development of zero energy houses • identify...... technical and architectural potentials and challenges related to the application of new technologies • make visible engineering and architectural issues and create greater transparency, providing a point of departure for cross-disciplinary cooperation....

Design Principles for Natural and Hybrid Ventilation

DEFF Research Database (Denmark)

Heiselberg, Per

For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation. ....... The hybrid ventilation concepts, design challenges and principles are discussed and illustrated by four building examples.......For many years mechanical and natural ventilation systems have developed separately. Naturally, the next step in this development is the development of ventilation concepts that utilize and combine the best features from each system to create a new type of ventilation system- Hybrid Ventilation...

Novel Principles and Techniques to Create a Natural Design in Female Hairline Correction Surgery.

Science.gov (United States)

Park, Jae Hyun

2015-12-01

Female hairline correction surgery is becoming increasingly popular. However, no guidelines or methods of female hairline design have been introduced to date. The purpose of this study was to create an initial framework based on the novel principles of female hairline design and then use artistic ability and experience to fine tune this framework. An understanding of the concept of 5 areas (frontal area, frontotemporal recess area, temporal peak, infratemple area, and sideburns) and 5 points (C, A, B, T, and S) is required for female hairline correction surgery (the 5A5P principle). The general concepts of female hairline correction surgery and natural design methods are, herein, explained with a focus on the correlations between these 5 areas and 5 points. A natural and aesthetic female hairline can be created with application of the above-mentioned concepts. The 5A5P principle of forming the female hairline is very useful in female hairline correction surgery.

Universal Design: Implications for Computing Education

Science.gov (United States)

Burgstahler, Sheryl

2011-01-01

Universal design (UD), a concept that grew from the field of architecture, has recently emerged as a paradigm for designing instructional methods, curriculum, and assessments that are welcoming and accessible to students with a wide range of characteristics, including those related to race, ethnicity, native language, gender, age, and disability.…

Implementing first-year assessment principles: An analysis of selected scholarly literature

OpenAIRE

Theda Thomas

2018-01-01

Assessment plays an important role in students’ learning as students often frame their learning around their assessment tasks. Well-designed assessment can be used to facilitate first-year students making their social and academic transition to university. In 2009, Professor David Nicol prepared a framework for first-year assessment practices that included 12 principles. In this study, these principles were revisited and used to analyse papers from 2013 to 2016 in the journals: ‘Assessment & ...

Applying Universal Instructional Design to Course Websites by Using Course Evaluations

Science.gov (United States)

Carter, Irene; Leslie, Donald; Kwan, Denise

2012-01-01

The authors explore their use of learner-centred teaching strategies and Universal Instructional Design (UID) on course websites. UID is based on universal design, the design of products and environments intended to be usable by all people to the greatest extent possible (Burgstahler & Cory, 2008). UID applies universal design to instructional…

Proof of principle for epitope-focused vaccine design

Science.gov (United States)

Correia, Bruno E.; Bates, John T.; Loomis, Rebecca J.; Baneyx, Gretchen; Carrico, Chris; Jardine, Joseph G.; Rupert, Peter; Correnti, Colin; Kalyuzhniy, Oleksandr; Vittal, Vinayak; Connell, Mary J.; Stevens, Eric; Schroeter, Alexandria; Chen, Man; MacPherson, Skye; Serra, Andreia M.; Adachi, Yumiko; Holmes, Margaret A.; Li, Yuxing; Klevit, Rachel E.; Graham, Barney S.; Wyatt, Richard T.; Baker, David; Strong, Roland K.; Crowe, James E.; Johnson, Philip R.; Schief, William R.

2014-03-01

Vaccines prevent infectious disease largely by inducing protective neutralizing antibodies against vulnerable epitopes. Several major pathogens have resisted traditional vaccine development, although vulnerable epitopes targeted by neutralizing antibodies have been identified for several such cases. Hence, new vaccine design methods to induce epitope-specific neutralizing antibodies are needed. Here we show, with a neutralization epitope from respiratory syncytial virus, that computational protein design can generate small, thermally and conformationally stable protein scaffolds that accurately mimic the viral epitope structure and induce potent neutralizing antibodies. These scaffolds represent promising leads for the research and development of a human respiratory syncytial virus vaccine needed to protect infants, young children and the elderly. More generally, the results provide proof of principle for epitope-focused and scaffold-based vaccine design, and encourage the evaluation and further development of these strategies for a variety of other vaccine targets, including antigenically highly variable pathogens such as human immunodeficiency virus and influenza.

Design and construction of a basic principle simulator: an experiment

International Nuclear Information System (INIS)

Fernandez, O.; Galdoz, E.; Flury, C.; Fontanini, H.; Maciel, F.; Rovere, L.; Carpio, R.

1992-01-01

This paper describes activities developed over design and building of a Basic Principle Simulator for nuclear power plants. This simulator has been developed in Process Control Division of Bariloche Atomic Center, Argentina. This project was sponsored jointly by CNEA and Atomic Energy International Organization, through the United Nations Program for Development. The paper specially emphasizes aspects like: architecture design methodology of real time simulators; graphic environment and interfaces design for users and instructor interaction, and for display information; test and validation of the used models; and human resources formation. Finally describes the actual implementation of the simulator to be used in Embalse Nuclear Power Plant. (author)

Implementing Universal Design Strategies in Municipalities - A Multidisciplinary Approach to Universal Design and Public Health.

Science.gov (United States)

Jensen, Roger

2016-01-01

Based on a national program, the regional authorities stimulated each of the 18 municipalities in Telemark 2012-15 to plan and build promenades with universal design. The cooperation between different disciplines was an important factor for good results. The project continues from 2016.

The Effect of Content Representation Design Principles on Users' Intuitive Beliefs and Use of E-Learning Systems

Science.gov (United States)

Al-Samarraie, Hosam; Selim, Hassan; Zaqout, Fahed

2016-01-01

A model is proposed to assess the effect of different content representation design principles on learners' intuitive beliefs about using e-learning. We hypothesized that the impact of the representation of course contents is mediated by the design principles of alignment, quantity, clarity, simplicity, and affordance, which influence the…

Seismic design and performance of nuclear safety related RC structures based on new seismic design principle

International Nuclear Information System (INIS)

Murugan, R.; Sivathanu Pillai, C.; Chattopadhyaya, S.; Sundaramurthy, C.

2011-01-01

Full text: Seismic design of safety related Reinforced Concrete (RC) structures of Nuclear power plants (NPP) in India as per the present AERB codal procedures tries to ensure predominantly elastic behaviour under OBE so that the features of Nuclear Power Plant (NPP) necessary for continued safe operation are designed to remain functional and prevent accident (collapse) of NPP under SSE for which certain Structures, Systems and Components (SSCs) those are necessary to ensure the capability to shut down the reactor safely, are designed to remain functional. While the seismic design principles of non safety related structures as per Indian code (IS 1893-2002) are ensuring elastic behaviour under DBE and inelastic behaviour under MCE by utilizing ductility and energy dissipation capacity of the structure effectively. The design principle of AERB code is ensuring elastic behaviour under OBE and is not enlightening much inference about the overall structural behaviour under SSE (only ensuring the capability of certain SSCs required for safe shutdown of reactor). Various buildings and structures of Indian Nuclear power plant are classified from the basis of associated safety functions in a descending order in according with their roles in preventions and mitigation of an accident or support functions for prevention. This paper covers a comprehensive seismic analysis and design methodology based on the AERB codal provisions followed for safety related RC structure taking Diesel Generator Building of PFBR as a case study and study and investigates its performance under OBE and SSE by carrying out Non-linear static Pushover analysis. Based on the analysis, observed variations, recommendations are given for getting the desired performance level so as to implement performance based design in the future NPP design

Climate-responsive design: A framework for an energy concept design-decision support tool for architects using principles of climate-responsive design

Directory of Open Access Journals (Sweden)

Remco Looman

2017-01-01

Full Text Available In climate-responsive design the building becomes an intermediary in its own energy housekeeping, forming a link between the harvest of climate resources and low energy provision of comfort. Essential here is the employment of climate-responsive building elements, defined as structural and architectural elements in which the energy infrastructure is far-reaching integrated. This thesis presents the results of research conducted on what knowledge is needed in the early stages of the design process and how to transfer and transform that knowledge to the field of the architect in order for them to successfully implement the principles of climate-responsive design. The derived content, form and functional requirements provide the framework for a design decision support tool. These requirements were incorporated into a concept tool that has been presented to architects in the field, in order to gain their feedback. Climate-responsive design makes the complex task of designing even more complex. Architects are helped when sufficient information on the basics of climate-responsive design and its implications are provided as informative support during decision making in the early design stages of analysis and energy concept development. This informative support on climate-responsive design should address to different design styles in order to be useful to any type of architects. What is defined as comfortable has far-reaching implications for the way buildings are designed and how they operate. This in turn gives an indication of the energy used for maintaining a comfortable indoor environment. Comfort is not a strict situation, but subjective. Diversity is appreciated and comfort is improved when users have the ability to exert influence on their environment. Historically, the provision of comfort has led to the adoption of mechanical climate control systems that operate in many cases indifferent from the building space and mass and its environment

Fuel cells principles, design, and analysis

CERN Document Server

Revankar, Shripad T

2014-01-01

""This book covers all essential themes of fuel cells ranging from fundamentals to applications. It includes key advanced topics important for understanding correctly the underlying multi-science phenomena of fuel cell processes. The book does not only cope with traditional fuel cells but also discusses the future concepts of fuel cells. The book is rich on examples and solutions important for applying the theory into practical use.""-Peter Lund, Aalto University, Helsinki""A good introduction to the range of disciplines needed to design, build and test fuel cells.""-Nigel Brandon, Imperial Co

Web Interface Design Principles for Adults’ Self-Directed Learning

Directory of Open Access Journals (Sweden)

Mehmet FIRAT

2016-10-01

Full Text Available One of the most important features which e-learning tools and environments must possess within the scope of lifelong learning is self-directed learning, which can be considered as a form of self-learning. The aim of this study was to determine, based on the views and recommendations of experts, interface design principles for the development of educational web interfaces that will support the self-directed learning of adults. This descriptive study was conducted with the contribution of 12 academicians specializing in interface design and self-directed learning. Within the scope of the study, new interfaces features were identified based on an evaluation of the literature on interface designs for self-directed learning, and the views of subject experts. Based on the study results, it was determined that interface designs supporting self-directed learning must possess five basic features, which include being user-directed, ensuring variety, being supported by learning analytics, being motivational, and being sharing-oriented.

Optimality principles in the regulation of metabolic networks.

Science.gov (United States)

Berkhout, Jan; Bruggeman, Frank J; Teusink, Bas

2012-08-29

One of the challenging tasks in systems biology is to understand how molecular networks give rise to emergent functionality and whether universal design principles apply to molecular networks. To achieve this, the biophysical, evolutionary and physiological constraints that act on those networks need to be identified in addition to the characterisation of the molecular components and interactions. Then, the cellular "task" of the network-its function-should be identified. A network contributes to organismal fitness through its function. The premise is that the same functions are often implemented in different organisms by the same type of network; hence, the concept of design principles. In biology, due to the strong forces of selective pressure and natural selection, network functions can often be understood as the outcome of fitness optimisation. The hypothesis of fitness optimisation to understand the design of a network has proven to be a powerful strategy. Here, we outline the use of several optimisation principles applied to biological networks, with an emphasis on metabolic regulatory networks. We discuss the different objective functions and constraints that are considered and the kind of understanding that they provide.

Optimality Principles in the Regulation of Metabolic Networks

Directory of Open Access Journals (Sweden)

Jan Berkhout

2012-08-01

Full Text Available One of the challenging tasks in systems biology is to understand how molecular networks give rise to emergent functionality and whether universal design principles apply to molecular networks. To achieve this, the biophysical, evolutionary and physiological constraints that act on those networks need to be identified in addition to the characterisation of the molecular components and interactions. Then, the cellular “task” of the network—its function—should be identified. A network contributes to organismal fitness through its function. The premise is that the same functions are often implemented in different organisms by the same type of network; hence, the concept of design principles. In biology, due to the strong forces of selective pressure and natural selection, network functions can often be understood as the outcome of fitness optimisation. The hypothesis of fitness optimisation to understand the design of a network has proven to be a powerful strategy. Here, we outline the use of several optimisation principles applied to biological networks, with an emphasis on metabolic regulatory networks. We discuss the different objective functions and constraints that are considered and the kind of understanding that they provide.

Leading Organizations for Universal Design

Science.gov (United States)

Berger, Joseph B.; Van Thanh, Duong

2004-01-01

The purpose of this article is to provide a model for helping campus leaders create and sustain efforts to fully incorporate Universal Instructional Design (UID) throughout their institutions. The article uses a multiple dimension model of organizational behavior as the basis for making recommendations to support this type of institutional…

A Learning and Interaction design framework, from a study on formulating principles for the design of engaging music learning games

DEFF Research Database (Denmark)

Weitze, Charlotte Lærke; Ørngreen, Rikke

2012-01-01

Based on a preliminary action research study investigating the design of digital music games and years of experiences from interaction design processes of learning resources, this extended abstract presents a framework that mixes designs for learning principles and game design with a process view...... using a simple interaction design lifecycle. Though the first outset was to design engaging music games, the resulting framework has a more generic character....

From Visions to Practical Policy: The Universal Design Journey in Norway. What Did We Learn? What Did We Gain? What Now?

Science.gov (United States)

Lund, Einar; Bringa, Olav Rand

2016-01-01

The national policy in Norway have since the last part of the 1990-ies been organized in programs that erected actions including national authorities, municipalities, regional authorities and private enterprises. What have we gained by our national activities to mainstream inclusive and accessibility policy for persons with reduced capability through the principles of Universal Design? Have we made society accessible to everyone and prevented discrimination. Are the results visible? We can measure results on several sectors, inter alia public buildings, outdoor areas, central communication hubs, public transport and the occurrence plans for Universal Design in municipalities and regions. Through several programs and action plans the Norwegian government has developed a sectoral approach for including persons with disabilities in the society. The majority of ministries have participated in these plans. Local initiatives, local councils for disabled people, and later on municipalities and county administrations were supported by national authorities as complements to regulations and laws. In addition, guidelines and assisting funds were used. The main objective was to redefine the national policy, using better defined national goals and introducing Universal Design to replace accessibility as the basic tool. The mainstreaming of the accessibility policy, where Universal Design was included in relevant sectors and activities, was a crucial part of the strategy. The national policy was organized in programs that erected actions focusing on how to reach, inspire and include municipalities and regional authorities in their own struggle for Universal Design. Through the mainstream approach ministries have both earmarked economic transfers to their own agencies and used steering documents guide to these agencies how to implement Universal Design in their advisory services, in practicing laws and regulations and in their own planning and building activities.

Assessing communication accessibility in the university classroom: towards a goal of universal hearing accessibility.

Science.gov (United States)

Cheesman, Margaret F; Jennings, Mary Beth; Klinger, Lisa

2013-01-01

Measures of accessibility typically focus on the physical environment and aspects relating to getting into and out of spaces. The transient sound environment is less well characterized in typical accessibility measures. Hearing accessibility measures can be based upon physical indices or functional assessment. The physical measures are indices that use signal-to-noise ratios to evaluate audibility while the functional assessment tool adopts universal design for hearing (UDH) principles derived from principles of universal design. The UDH principles include (1) Optimization of the hearing environment for all; (2) Optimization of interactions between persons and objects to promote better hearing in an environment; (3) Optimization of opportunities for people to have multiple choices of interactions with one another; (4) Optimization of opportunities for people to perform different activities in and across environments; (5) Optimization of opportunities for people to have safe, private, and secure use of the environment while minimizing distraction, interference, or cognitive loading; and (6) Optimization of opportunities for people to use the environment without extra steps for hearing access during preparatory, use and/or after use phases. This paper compares the two approaches using case examples from post-secondary classrooms in order to describe the potential advantages and limitations of each.

Principles relating to the digital instrumentation and control design approach 2017

International Nuclear Information System (INIS)

2017-01-01

The design of the instrumentation and control of nuclear facilities uses digital systems that offer increasing computation and interconnection capabilities. They enable advanced functions to be carried out, such as calculation of the critical heat flux ratio, help to detect hardware failures in real time and provide operators with rich, flexible interfaces. However, these evolved functions may be affected by faults that make their logic systematically inadequate in certain cases, which introduces sources of failure other than random hardware failures and raises questions about the informal concept of the increased 'complexity' of instrumentation and control. Appropriate design principles shall therefore be applied so that this logic is as fault-free as possible and can be assessed by an independent body such as IRSN. This document presents the main problems associated with the design of the digital instrumentation and control of a complex facility, as well as the general principles to follow to demonstrate that a satisfactory safety level has been achieved. The doctrine elements presented in this document are the result of the experience acquired during assessments carried out for the French nuclear power plants, enhanced by exchanges with experts from the nuclear sector, and reflect French practice; they apply in other sectors in which a high level of confidence can be attributed to instrumentation and control. The normative texts cited in this document provide detailed requirements that are open to considerable interpretation, as the nature of the problem posed does not enable relevant and measurable criteria to be defined in all cases. This document aims to explain the principles underlying these detailed requirements and to give the means for interpreting them in each situation. (authors)

Energy Efficiency and Universal Design in Home Renovations - A Comparative Review.

Science.gov (United States)

Kapedani, Ermal; Herssens, Jasmien; Verbeeck, Griet

2016-01-01

Policy and societal objectives indicate a large need for housing renovations that both accommodate lifelong living and significantly increase energy efficiency. However, these two areas of research are not yet examined in conjunction and this paper hypothesizes this as a missed opportunity to create better renovation concepts. The paper outlines a comparative review on research in Energy Efficiency and Universal Design in order to find the similarities and differences in both depth and breadth of knowledge. Scientific literature in the two fields reveals a disparate depth of knowledge in areas of theory, research approach, and degree of implementation in society. Universal Design and Energy Efficiency are part of a trajectory of expanding scope towards greater sustainability and, although social urgency has been a driver of the research intensity and approach in both fields, in energy efficiency there is an engineering, problem solving approach while Universal Design has a more sociological, user-focused one. These different approaches are reflected in the way home owners in Energy Efficiency research are viewed as consumers and decision makers whose drivers are studied, while Universal Design treats home owners as informants in the design process and studies their needs. There is an inherent difficulty in directly merging Universal Design and Energy Efficiency at a conceptual level because Energy Efficiency is understood as a set of measures, i.e. a product, while Universal Design is part of a (design) process. The conceptual difference is apparent in their implementation as well. Internationally energy efficiency in housing has been largely imposed through legislation, while legislation directly mandating Universal Design is either non-existent or it has an explicit focus on accessibility. However, Energy Efficiency and Universal Design can be complementary concepts and, even though it is more complex than expected, the combination offers possibilities to advance

Design-based research in designing the model for educating simulation facilitators.

Science.gov (United States)

Koivisto, Jaana-Maija; Hannula, Leena; Bøje, Rikke Buus; Prescott, Stephen; Bland, Andrew; Rekola, Leena; Haho, Päivi

2018-03-01

The purpose of this article is to introduce the concept of design-based research, its appropriateness in creating education-based models, and to describe the process of developing such a model. The model was designed as part of the Nurse Educator Simulation based learning project, funded by the EU's Lifelong Learning program (2013-1-DK1-LEO05-07053). The project partners were VIA University College, Denmark, the University of Huddersfield, UK and Metropolia University of Applied Sciences, Finland. As an outcome of the development process, "the NESTLED model for educating simulation facilitators" (NESTLED model) was generated. This article also illustrates five design principles that could be applied to other pedagogies. Copyright © 2018 Elsevier Ltd. All rights reserved.

Culture and the quest for universal principles in moral reasoning.

Science.gov (United States)

Sachdeva, Sonya; Singh, Purnima; Medin, Douglas

2011-06-01

The importance of including cultural perspectives in the study of human cognition has become apparent in recent decades, and the domain of moral reasoning is no exception. The present review focuses on moral cognition, beginning with Kohlberg's model of moral development which relies heavily on people's justifications for their judgments and then shifting to more recent theories that rely on rapid, intuitive judgments and see justifications as more or less irrelevant to moral cognition. Despite this dramatic shift, analyses of culture and moral decision-making have largely been framed as a quest for and test of universal principles of moral judgment. In this review, we discuss challenges that remain in trying to understand crosscultural variability in moral values and the processes that underlie moral cognition. We suggest that the universalist framework may lead to an underestimation of the role of culture in moral reasoning. Although the field has made great strides in incorporating more and more cultural perspectives in order to understand moral cognition, theories of moral reasoning still do not allow for substantial variation in how people might conceptualize the domain of the moral. The processes that underlie moral cognition may not be a human universal in any simple sense, because moral systems may play different roles in different cultures. We end our review with a discussion of work that remains to be done to understand cultural variation in the moral domain.

A national environmental design contest and capstone course for universities

International Nuclear Information System (INIS)

Bhada, Ron K.; Abbas Ghassemi; Deraid Morgan, J.

1992-01-01

The Waste-management Education and Research Consortium (WERC) of New Mexico has developed and implemented an environmental design contest for competition by universities throughout America. This is the first university environmental design contest anywhere in the world. WERC is a consortium of three universities, a community college, and two national laboratories sponsored by the DOE with the mission of generating resources to address issues associated with environmental management. The contest was structured to give university student groups from all over America an opportunity to exchange information via a national contest for design, development, and testing of an environmental control process. A practical environmental problem was presented to the competing teams. Each team prepared a total plant design for the solution of the environmental problem. They further prepared a working model to demonstrate each solution on a smaller scale. The design stressed not just the technical solution, but also such factors as economics, risk analysis, regulations, public policy and communications. The judging was preformed by experts from academia, industry and government agencies. The awards were based on the written plant design, the small demonstration, as well as presentations by the competing teams. All the criteria noted above(technical excellence, risk analysis, etc.) were weighted in the judging. Seven universities from throughout the United States competed in the first contest held in April 1991. The program fully accomplished its objective of providing a design challenge as well as providing a medium of exchanging information in the environmental area between various regions of the country. Over twenty universities have signed up to compete in next year's contest. In fact many have used the contest problem as part of their capstone design course. This paper presents the experiences of the first design contest and the topic for the second year. (author)

Principles of Protocol Design

DEFF Research Database (Denmark)

Sharp, Robin

This is a new and updated edition of a book first published in 1994. The book introduces the reader to the principles used in the construction of a large range of modern data communication protocols, as used in distributed computer systems of all kinds. The approach taken is rather a formal one...

Testing Universal Design of a Public Media Website with Diverse Users.

Science.gov (United States)

Chen, Weiqin; Kessel, Siri; Sanderson, Norun C; Tatara, Naoe

2016-01-01

Testing with users can identify more issues than other testing methods. Many researchers have argued for the importance of user testing in Universal Design. However, testing Universal Design with diverse users poses many challenges. In this paper we will share our experience with testing the Universal Design of a public media website with real users. We discuss the challenges faced and lessons learned in the process.

High-throughput spectrometer designs in a compact form-factor: principles and applications

Science.gov (United States)

Norton, S. M.

2013-05-01

Many compact, portable Raman spectrometers have entered the market in the past few years with applications in narcotics and hazardous material identification, as well as verification applications in pharmaceuticals and security screening. Often, the required compact form-factor has forced designers to sacrifice throughput and sensitivity for portability and low-cost. We will show that a volume phase holographic (VPH)-based spectrometer design can achieve superior throughput and thus sensitivity over conventional Czerny-Turner reflective designs. We will look in depth at the factors influencing throughput and sensitivity and illustrate specific VPH-based spectrometer examples that highlight these design principles.

Designing Social Interfaces Principles, Patterns, and Practices for Improving the User Experience

CERN Document Server

Crumlish, Christian

2009-01-01

From the creators of Yahoo!'s Design Pattern Library, Designing Social Interfaces provides you with more than 100 patterns, principles, and best practices, along with salient advice for many of the common challenges you'll face when starting a social website. Designing sites that foster user interaction and community-building is a valuable skill for web developers and designers today, but it's not that easy to understand the nuances of the social web. Now you have help. Christian Crumlish and Erin Malone share hard-won insights into what works, what doesn't, and why. You'll learn how to bala

Design Principle of A Small Angle Neutron Scattering Spectrometer. Vol. 2

Energy Technology Data Exchange (ETDEWEB)

Ashry, A [Dept. of Physics, Faculty of Education, Ain Shams University, Cairo (Egypt)

1996-03-01

The design principle of a small angle neutron scattering (SANS) spectrometer is based on producing monochromatic neutron bursts using two phased rotors. The rotors have a number of slots to achieve the highly available intensity of monoenergetic neutrons at the required resolution. The design principle was applied to improve the performance of the pulsed monochromatic double rotor system at ET-RR-1 to operate as SANS spectrometer. It is shown that for rotors having 19 slots each with radius of curvature 96.8 cm, the intensity gain factor is 13. The proposed SANS spectrometer could cover the neutron wavelength range from 2 A{sup {omicron}} up to 6 A{sup {omicron}} through small angles of scattering from 5 x 10{sup -3} rad. to 0.1 rad. i.e, the scattering wavevector transfer between 0.6 A{sup {omicron}-1} and 0.01 A{sup {omicron}-1}. The maximum neutron flux density on the specimen is 5 x 10{sup 5} n cm{sup -2} s{sup -1}. 8 figs.

Integrating medical, assistive, and universally designed products and technologies: assistive technology device classification (ATDC).

Science.gov (United States)

Bauer, Stephen; Elsaesser, Linda-Jeanne

2012-09-01

ISO26000:2010 International Guidance Standard on Organizational Social Responsibility requires that effective organizational performance recognize social responsibility, including the rights of persons with disabilities (PWD), engage stakeholders and contribute to sustainable development. Millennium Development Goals 2010 notes that the most vulnerable people require special attention, while the World Report on Disability 2011 identifies improved data collection and removal of barriers to rehabilitation as the means to empower PWD. The Assistive Technology Device Classification (ATDC), Assistive Technology Service Method (ATSM) and Matching Person and Technology models provide an evidence-based, standardized, internationally comparable framework to improve data collection and rehabilitation interventions. The ATDC and ATSM encompass and support universal design (UD) principles, and use the language and concepts of the International Classification of Functioning, Disability and Health (ICF). Use ATDC and ICF concepts to differentiate medical, assistive and UD products and technology; relate technology "types" to markets and costs; and support provision of UD products and technologies as sustainable and socially responsible behavior. Supply-side and demand-side incentives are suggested to foster private sector development and commercialization of UD products and technologies. Health and health-related professionals should be knowledgeable of UD principles and interventions.

Engineering drawing from first principles using AutoCAD

CERN Document Server

Maguire, Dennis E

1998-01-01

Engineering Drawing From First Principles is a guide to good draughting for students of engineering who need to learn how to produce technically accurate and detailed designs to British and International Standards. Written by Dennis Maguire, an experienced author and City and Guilds chief examiner, this text is designed for use on Further Education and University courses where a basic understanding of draughtsmanship and CAD is necessary. Although not written as an AutoCAD tutor, the book will be a useful introduction to good CAD practice.Part of the Revision and Self-Assessmen

Design and evaluation of potentiometric principles for bladder volume monitoring: a preliminary study.

Science.gov (United States)

Chen, Shih-Ching; Hsieh, Tsung-Hsun; Fan, Wen-Jia; Lai, Chien-Hung; Chen, Chun-Lung; Wei, Wei-Feng; Peng, Chih-Wei

2015-06-01

Recent advances in microelectronics and wireless transmission technology have led to the development of various implantable sensors for real-time monitoring of bladder conditions. Although various sensing approaches for monitoring bladder conditions were reported, most such sensors have remained at the laboratory stage due to the existence of vital drawbacks. In the present study, we explored a new concept for monitoring the bladder capacity on the basis of potentiometric principles. A prototype of a potentiometer module was designed and fabricated and integrated with a commercial wireless transmission module and power unit. A series of in vitro pig bladder experiments was conducted to determine the best design parameters for implementing the prototype potentiometric device and to prove its feasibility. We successfully implemented the potentiometric module in a pig bladder model in vitro, and the error of the accuracy of bladder volume detection was design principles and animal experience gathered from this research can serve as a basis for developing new implantable bladder sensors in the future.

Promoting Participation Through the Universal Design of Built Environments: Making it Happen

Directory of Open Access Journals (Sweden)

Valerie Watchorn

2014-12-01

Full Text Available Environmental design is a determinant of social inclusion and people’s participation in life roles. Design that does not cater for a diverse range of ages, abilities and cultures restricts people’s access to, and use of, domestic or public premises. Universal design is an approach that acknowledges diversity of populations and encourages designers to create objects and places that are usable by the greatest majority of users. Although there are potential benefits to the widest application of universal design within society, such application is not mandatory within Australia. This paper presents findings from an Australian qualitative study that explored universal design as a means of facilitating greater environmental access for all. The views of experts working within the field of architecture and environmental access were explored regarding factors that restrict or facilitate application of universal design to the design of built environments. Study findings revealed a number of themes relating to factors that may restrain, ‘what’s holding us back?’ and factors that may facilitate application of universal design, ‘making it happen’. These findings have direct relevance to those involved in the planning and design of built environments, policy developers and educators. Keywords: Universal design, architecture, occupational therapy, built environments, barriers, facilitators, inter-professional education

Principles for designing proteins with cavities formed by curved β sheets

Energy Technology Data Exchange (ETDEWEB)

Marcos, Enrique; Basanta, Benjamin; Chidyausiku, Tamuka M.; Tang, Yuefeng; Oberdorfer, Gustav; Liu, Gaohua; Swapna, G. V. T.; Guan, Rongjin; Silva, Daniel-Adriano; Dou, Jiayi; Pereira, Jose Henrique; Xiao, Rong; Sankaran, Banumathi; Zwart, Peter H.; Montelione, Gaetano T.; Baker, David

2017-01-12

Active sites and ligand-binding cavities in native proteins are often formed by curved β sheets, and the ability to control β-sheet curvature would allow design of binding proteins with cavities customized to specific ligands. Toward this end, we investigated the mechanisms controlling β-sheet curvature by studying the geometry of β sheets in naturally occurring protein structures and folding simulations. The principles emerging from this analysis were used to design, de novo, a series of proteins with curved β sheets topped with α helices. Nuclear magnetic resonance and crystal structures of the designs closely match the computational models, showing that β-sheet curvature can be controlled with atomic-level accuracy. Our approach enables the design of proteins with cavities and provides a route to custom design ligand-binding and catalytic sites.

Team designing

DEFF Research Database (Denmark)

Denise J. Stokholm, Marianne

2012-01-01

Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and gi...... thinking and communication in design. Trying to answer the question: How can visual system models facilitate learning in design thinking and team designing?......Future wellbeing is depending on human competences in order to strengthen a sustainable development. This requires system thinking and ability to deal with complexity, dynamic and a vast of information. `We need to move away from present principles of breaking down problems into components and give...... in relation to a design-engineering education at Aalborg University. It will exemplify how the model has been used in workshops on team designing, challenged design learning and affected design competence. In specific it will investigate the influence of visual models of the perception of design, design...

Compliance to Universal Design Criteria in Nursing Homes of Tehran

Directory of Open Access Journals (Sweden)

Morteza Nasiri

2016-07-01

Conclusion: The findings of this study showed that the majority of nursing homes evaluated did not follow the universal design criteria. Therefore, providing the proper guidelines and policies to promote the universal design observance in nursing homes is considered as a major necessity.

A review of human factors principles for the design and implementation of medication safety alerts in clinical information systems.

Science.gov (United States)

Phansalkar, Shobha; Edworthy, Judy; Hellier, Elizabeth; Seger, Diane L; Schedlbauer, Angela; Avery, Anthony J; Bates, David W

2010-01-01

The objective of this review is to describe the implementation of human factors principles for the design of alerts in clinical information systems. First, we conduct a review of alarm systems to identify human factors principles that are employed in the design and implementation of alerts. Second, we review the medical informatics literature to provide examples of the implementation of human factors principles in current clinical information systems using alerts to provide medication decision support. Last, we suggest actionable recommendations for delivering effective clinical decision support using alerts. A review of studies from the medical informatics literature suggests that many basic human factors principles are not followed, possibly contributing to the lack of acceptance of alerts in clinical information systems. We evaluate the limitations of current alerting philosophies and provide recommendations for improving acceptance of alerts by incorporating human factors principles in their design.

Designing Student Feedback System within the Course Evaluation Process: Dokuz Eylül University Case Study

Directory of Open Access Journals (Sweden)

Muhammet DAMAR

2017-04-01

Full Text Available The Bologna Process at National Higher Education Programs initiated a series of studies regarding the assessment and evaluation of quality in higher education. Dokuz Eylül University has taken this initiation into a primary concern to develop a methodology for the measurement of quality in undergraduate education. Besides the existing systems on this subject at Dokuz Eylül University, substantial progress was recently made by developing innovative sub-systems aiming further improvements. As one of the most important stakeholders, the feedback from students about the quality of the courses was selected as the major concern and a Student Course Feedback System was developed for this purpose. As an exemplary case study, this reveals how the Student Course Feedback System was designed, the process, the technologies used, the problems and constraints encountered, and the roadmap that can be followed by other universities. Dokuz Eylül University has interiorized this process as a corporate culture by directing instructors to make improvements in the courses with respect to the outputs of the evaluation forms, including questions about learning outcomes, instructors, and physical conditions. The integrated design of the Student Course Feedback System with the existing information systems has enabled management to implement a course evaluation system comprising the trilogy of students, instructors, and courses as a whole. The existence of such an assessment process supports the principles of continuous improvement and helps to establish the factual decision making process as an important milestone on the roadmap for a living quality assurance system.

Review: Janice M. Morse & Linda Niehaus (2009). Mixed method design: principles and procedures

OpenAIRE

Öhlen, Joakim

2010-01-01

Mixed-Method-Designs, in denen quantitative und qualitative Methoden Verwendung finden, erfreuen sich zunehmender Beliebtheit für die Untersuchung komplexer Phänomene. Die vorliegende Besprechung beschäftigt sich in diesem Zusammenhang mit dem Buch "Mixed Method Design: Principles and Procedures" von Janice M. MORSE und Linda NIEHAUS, die für solche Designs Kern- und Ergänzungskomponenten zu identifizieren versuchen. Hierzu differenzieren sie zwischen Projekten, die einer eher deduktiven oder...

Principles of human joint replacement design and clinical application

CERN Document Server

Buechel, Frederick F

2015-01-01

This book is written for the users and designers of joint replacements. In its second extended edition it conveys to the reader the knowledge accumulated by the authors during their forty year effort on the development of replacement devices for the lower limb for the purpose of aiding the reader in their design and evaluation of joint replacement devices. The early chapters describe the engineering, scientific and medical principles needed for replacement joint evaluation. One must understand the nature and performance of the materials involved and their characteristics in vivo, i.e. the response of the body to implant materials. It is also essential to understand the response of the implants to applied loading and motion, particularly in the hostile physiological environment. A chapter describes the design methodology now required for joint replacement in the USA and EU countries. The remaining chapters provide a history of joint replacement, an evaluation of earlier and current devices and sample case hist...

Principles of Human Joint Replacement Design and Clinical Application

CERN Document Server

Buechel, Frederick F

2012-01-01

Drs. Buechel, an orthopaedic surgeon, and Pappas, a professor of Mechanical Engineering, are the designers of several successful joint replacement systems. The most well-known of these is the pioneering LCS knee replacement. They have written this book for the users and designers of joint replacements. It is an attempt to convey to the reader the knowledge accumulated by the authors during their thirty five year effort on the development of replacement devices for the lower limb for the purpose of aiding the reader in their design and evaluation of joint replacement devices. The early chapters describe the engineering, scientific and medical principles needed for replacement joint evaluation. One must understand the nature and performance of the materials involved and their characteristics in vivo, i.e. the response of the body to implant materials. It is also essential to understand the response of the implants to applied loading and motion, particularly in the hostile physiological environment. A chapter de...

Virus-inspired design principles of nanoparticle-based bioagents.

Directory of Open Access Journals (Sweden)

Hongyan Yuan

Full Text Available The highly effectiveness and robustness of receptor-mediated viral invasion of living cells shed lights on the biomimetic design of nanoparticle(NP-based therapeutics. Through thermodynamic analysis, we elucidate that the mechanisms governing both the endocytic time of a single NP and the cellular uptake can be unified into a general energy-balance framework of NP-membrane adhesion and membrane deformation. Yet the NP-membrane adhesion strength is a globally variable quantity that effectively regulates the NP uptake rate. Our analysis shows that the uptake rate interrelatedly depends on the particle size and ligand density, in contrast to the widely reported size effect. Our model predicts that the optimal radius of NPs for maximal uptake rate falls in the range of 25-30 nm, and optimally several tens of ligands should be coated onto NPs. These findings are supported by both recent experiments and typical viral structures, and serve as fundamental principles for the rational design of NP-based nanomedicine.

Design principles for solid-state lithium superionic conductors.

Science.gov (United States)

Wang, Yan; Richards, William Davidson; Ong, Shyue Ping; Miara, Lincoln J; Kim, Jae Chul; Mo, Yifei; Ceder, Gerbrand

2015-10-01

Lithium solid electrolytes can potentially address two key limitations of the organic electrolytes used in today's lithium-ion batteries, namely, their flammability and limited electrochemical stability. However, achieving a Li(+) conductivity in the solid state comparable to existing liquid electrolytes (>1 mS cm(-1)) is particularly challenging. In this work, we reveal a fundamental relationship between anion packing and ionic transport in fast Li-conducting materials and expose the desirable structural attributes of good Li-ion conductors. We find that an underlying body-centred cubic-like anion framework, which allows direct Li hops between adjacent tetrahedral sites, is most desirable for achieving high ionic conductivity, and that indeed this anion arrangement is present in several known fast Li-conducting materials and other fast ion conductors. These findings provide important insight towards the understanding of ionic transport in Li-ion conductors and serve as design principles for future discovery and design of improved electrolytes for Li-ion batteries.

Universal design of workplaces through the use of Poka-Yokes: Case study and implications

Directory of Open Access Journals (Sweden)

Cristóbal Miralles

2011-10-01

Full Text Available Purpose: Employment plays an important part in many people’s lives beyond merely providing income, since continued participation in work can have many therapeutic benefits for workers defined as disabled. However, disabled workers face a range of barriers to employment, despite legislation intended to improve workplace accessibility emphasizing adaptations to the workplace, which many employers often find difficult and expensive. The Poka-Yoke approach was developed in the manufacturing industry as a way of improving productivity by reducing errors using often very simple adaptations. This paper argues that, as Poka-Yokes are designed to make life easier and improve the performance of workers without impairments, they are closer to the philosophy of Universal Design than to Accessible Design, and offer an easy and inclusive way of making work more accessible for all kind of workers. Design/methodology/approach: This paper provides a case study demonstrating the use of the Poka-Yoke approach in a sheltered work centre for disabled; highlighting how they served to improve accessibility to work by fulfilling Universal Design principles. Findings: Our research allows us to demonstrate the great potential of Poka-yokes for gaining accessibility to the workplace. The real application of this approach, both in sheltered work centres and ordinary companies, can contribute to improve the high unemployment rates of disabled people. Research limitations/implications: The proposal is innovative and was applied in one specific company. Thus, a range of customized Poka-yokes would be desirable for different industrial sectors. Practical implications: Managers of sheltered work centres, and also of ordinary companies, can realize about the great potential of Poka-Yokes as an easy means of gaining flexibility and accessibility. Originality/value: There are very few papers relating lean manufacturing tools and disability. Our approach analyzes the benefits of

Design principles and algorithms for automated air traffic management

Science.gov (United States)

Erzberger, Heinz

1995-01-01

This paper presents design principles and algorithm for building a real time scheduler. The primary objective of the scheduler is to assign arrival aircraft to a favorable landing runway and schedule them to land at times that minimize delays. A further objective of the scheduler is to allocate delays between high altitude airspace far from the airport and low altitude airspace near the airport. A method of delay allocation is described that minimizes the average operating cost in the presence of errors in controlling aircraft to a specified landing time.

A review of human factors principles for the design and implementation of medication safety alerts in clinical information systems

OpenAIRE

Phansalkar, Shobha; Edworthy, Judy; Hellier, Elizabeth; Seger, Diane L; Schedlbauer, Angela; Avery, Anthony J; Bates, David W

2010-01-01

The objective of this review is to describe the implementation of human factors principles for the design of alerts in clinical information systems. First, we conduct a review of alarm systems to identify human factors principles that are employed in the design and implementation of alerts. Second, we review the medical informatics literature to provide examples of the implementation of human factors principles in current clinical information systems using alerts to provide medication decisio...

Review: Janice M. Morse & Linda Niehaus (2009). Mixed Method Design: Principles and Procedures

OpenAIRE

Öhlen, Joakim

2010-01-01

Mixed method design related to the use of a combination of methods, usually quantitative and qualitative, is increasingly used for the investigation of complex phenomena. This review discusses the book, "Mixed Method Design: Principles and Procedures," by Janice M. MORSE and Linda NIEHAUS. A distinctive feature of their approach is the consideration of mixed methods design out of a core and a supplemental component. In order to define these components they emphasize the overall conceptual dir...

Novel Designs for the Audio Mixing Interface Based on Data Visualisation First Principles

OpenAIRE

Dewey, Christopher; Wakefield, Jonathan P.

2016-01-01

Given the shortcomings of current audio mixing interfaces (AMIs) this study focuses on the development of alternative AMIs based on data visualisation first principles. The elementary perceptual tasks defined by Cleveland informed the design process. Two design ideas were considered for pan: using the elementary perceptual tasks ‘scale’ to display pan on either a single or multiple horizontal lines. Four design ideas were considered for level:\\ud using ‘length’, ‘area’, ‘saturation’ or ‘scala...

Constructal Law and the Unifying Principle of Design

CERN Document Server

Lorente, Sylvie; Bejan, Adrian

2013-01-01

Design happens everywhere, whether in animate objects (e.g., dendritic lung structures, bacterial colonies, and corals), inanimate patterns (river basins, beach slope, and dendritic crystals), social dynamics (pedestrian traffic flows), or engineered systems (heat dissipation in electronic circuitry). This “design in nature” often takes on remarkably similar patterns, which can be explained under one unifying Constructal Law. This book explores the unifying power of the Constructal Law and its applications in all domains of design generation and evolution, ranging from biology and geophysics to globalization, energy, sustainability, and security.  The Constructal Law accounts for the universal tendency of flow systems to morph into evolving configurations that provide greater and easier access over time. The Constructal Law resolves the many and contradictory ad hoc statements of “optimality”, end design, and destiny in nature, such as minimum and maximum entropy production and minimum and maximum fl...

Teaching Hybrid Principles of Finance to Undergraduate Business Students--Can It Work?

Science.gov (United States)

Letterman, Denise

2008-01-01

The purpose of this study was to examine the relationship between course design and predictor variables: motivation, satisfaction, and success for students enrolled in the hybrid Principles of Finance course. The participants for this research project were 117 undergraduate students (encompassing 6 semesters) at Robert Morris University,…

Three Principles of Perception for Instructional Interface Design.

Science.gov (United States)

Lohr, Linda L.

2000-01-01

Discusses graphical user interfaces used for instructional purposes in educational environments, which promote learning goals, and in support environments, which promote performance goals. Explains three key principles of perception and gives guidelines for their use, including the figure/ground principle, the hierarchy principle, and the gestalt…

Synthetic Elucidation of Design Principles for Molecular Qubits

Science.gov (United States)

Graham, Michael James

Quantum information processing (QIP) is an emerging computational paradigm with the potential to enable a vast increase in computational power, fundamentally transforming fields from structural biology to finance. QIP employs qubits, or quantum bits, as its fundamental units of information, which can exist in not just the classical states of 0 or 1, but in a superposition of the two. In order to successfully perform QIP, this superposition state must be sufficiently long-lived. One promising paradigm for the implementation of QIP involves employing unpaired electrons in coordination complexes as qubits. This architecture is highly tunable and scalable, however coordination complexes frequently suffer from short superposition lifetimes, or T2. In order to capitalize on the promise of molecular qubits, it is necessary to develop a set of design principles that allow the rational synthesis of complexes with sufficiently long values of T2. In this dissertation, I report efforts to use the synthesis of series of complexes to elucidate design principles for molecular qubits. Chapter 1 details previous work by our group and others in the field. Chapter 2 details the first efforts of our group to determine the impact of varying spin and spin-orbit coupling on T2. Chapter 3 examines the effect of removing nuclear spins on coherence time, and reports a series of vanadyl bis(dithiolene) complexes which exhibit extremely long coherence lifetimes, in excess of the 100 mus threshold for qubit viability. Chapters 4 and 5 form two complimentary halves of a study to determine the exact relationship between electronic spin-nuclear spin distance and the effect of the nuclear spins on T2. Finally, chapter 6 suggests next directions for the field as a whole, including the potential for work in this field to impact the development of other technologies as diverse as quantum sensors and magnetic resonance imaging contrast agents.

Biomedical engineering principles

CERN Document Server

Ritter, Arthur B; Valdevit, Antonio; Ascione, Alfred N

2011-01-01

Introduction: Modeling of Physiological ProcessesCell Physiology and TransportPrinciples and Biomedical Applications of HemodynamicsA Systems Approach to PhysiologyThe Cardiovascular SystemBiomedical Signal ProcessingSignal Acquisition and ProcessingTechniques for Physiological Signal ProcessingExamples of Physiological Signal ProcessingPrinciples of BiomechanicsPractical Applications of BiomechanicsBiomaterialsPrinciples of Biomedical Capstone DesignUnmet Clinical NeedsEntrepreneurship: Reasons why Most Good Designs Never Get to MarketAn Engineering Solution in Search of a Biomedical Problem

Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

International Nuclear Information System (INIS)

Laganà, Alessandro; Shasha, Dennis; Croce, Carlo Maria

2014-01-01

The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

Energy Technology Data Exchange (ETDEWEB)

Laganà, Alessandro [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States); Shasha, Dennis [Courant Institute of Mathematical Sciences, New York University, New York, NY (United States); Croce, Carlo Maria [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States)

2014-12-11

The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

Seeing is believing: good graphic design principles for medical research.

Science.gov (United States)

Duke, Susan P; Bancken, Fabrice; Crowe, Brenda; Soukup, Mat; Botsis, Taxiarchis; Forshee, Richard

2015-09-30

Have you noticed when you browse a book, journal, study report, or product label how your eye is drawn to figures more than to words and tables? Statistical graphs are powerful ways to transparently and succinctly communicate the key points of medical research. Furthermore, the graphic design itself adds to the clarity of the messages in the data. The goal of this paper is to provide a mechanism for selecting the appropriate graph to thoughtfully construct quality deliverables using good graphic design principles. Examples are motivated by the efforts of a Safety Graphics Working Group that consisted of scientists from the pharmaceutical industry, Food and Drug Administration, and academic institutions. Copyright © 2015 John Wiley & Sons, Ltd.

Effect of Simulation on Undergraduate Nursing Students' Knowledge of Nursing Ethics Principles.

Science.gov (United States)

Donnelly, Mary Broderick; Horsley, Trisha Leann; Adams, William H; Gallagher, Peggy; Zibricky, C Dawn

2017-12-01

Background Undergraduate nursing education standards include acquisition of knowledge of ethics principles and the prevalence of health-care ethical dilemmas mandates that nursing students study ethics. However, little research has been published to support best practices for teaching/learning ethics principles. Purpose This study sought to determine if participation in an ethics consultation simulation increased nursing students' knowledge of nursing ethics principles compared to students who were taught ethics principles in the traditional didactic format. Methods This quasi-experimental study utilized a pre-test/post-test design with randomized assignment of students at three universities into both control and experimental groups. Results Nursing students' knowledge of nursing ethics principles significantly improved from pre-test to post-test ( p = .002); however, there was no significant difference between the experimental and control groups knowledge scores ( p = .13). Conclusion Further research into use of simulation to teach ethics principles is indicated.

Analysis of Unit Costs in a University. The Fribourg Example. Program on Institutional Management in Higher Education.

Science.gov (United States)

Pasquier, Jacques; Sachse, Matthias

Costing principles are applied to a university by estimating unit costs and their component factors for the university's different inputs, activities, and outputs. The information system used is designed for Fribourg University but could be applicable to other Swiss universities and could serve Switzerland's universities policy. In general, it…

Basic design principles of colorimetric vision systems

Science.gov (United States)

Mumzhiu, Alex M.

1998-10-01

Color measurement is an important part of overall production quality control in textile, coating, plastics, food, paper and other industries. The color measurement instruments such as colorimeters and spectrophotometers, used for production quality control have many limitations. In many applications they cannot be used for a variety of reasons and have to be replaced with human operators. Machine vision has great potential for color measurement. The components for color machine vision systems, such as broadcast quality 3-CCD cameras, fast and inexpensive PCI frame grabbers, and sophisticated image processing software packages are available. However the machine vision industry has only started to approach the color domain. The few color machine vision systems on the market, produced by the largest machine vision manufacturers have very limited capabilities. A lack of understanding that a vision based color measurement system could fail if it ignores the basic principles of colorimetry is the main reason for the slow progress of color vision systems. the purpose of this paper is to clarify how color measurement principles have to be applied to vision systems and how the electro-optical design features of colorimeters have to be modified in order to implement them for vision systems. The subject of this presentation far exceeds the limitations of a journal paper so only the most important aspects will be discussed. An overview of the major areas of applications for colorimetric vision system will be discussed. Finally, the reasons why some customers are happy with their vision systems and some are not will be analyzed.

Implementing the "Marketing You" Project in Large Sections of Principles of Marketing

Science.gov (United States)

Smith, Karen H.

2004-01-01

There is mounting pressure on business education to increase experiential learning at the same time that budget constraints are forcing universities to increase class size. This article explains the design and implementation of the "Marketing You" project in two large sections of Principles of Marketing to bring experiential learning into the…

Basic principles of test-negative design in evaluating influenza vaccine effectiveness.

Science.gov (United States)

Fukushima, Wakaba; Hirota, Yoshio

2017-08-24

Based on the unique characteristics of influenza, the concept of "monitoring" influenza vaccine effectiveness (VE) across the seasons using the same observational study design has been developed. In recent years, there has been a growing number of influenza VE reports using the test-negative design, which can minimize both misclassification of diseases and confounding by health care-seeking behavior. Although the test-negative designs offer considerable advantages, there are some concerns that widespread use of the test-negative design without knowledge of the basic principles of epidemiology could produce invalid findings. In this article, we briefly review the basic concepts of the test-negative design with respect to classic study design such as cohort studies or case-control studies. We also mention selection bias, which may be of concern in some countries where rapid diagnostic testing is frequently used in routine clinical practices, as in Japan. Copyright © 2017. Published by Elsevier Ltd.

Creating university spin-offs: a science-based design perspective

NARCIS (Netherlands)

Burg, van J.C.; Romme, A.G.L.; Gilsing, V.A.; Reymen, I.M.M.J.

2008-01-01

Academic entrepreneurship by means of university spin-offs commercializes technological breakthroughs, which may otherwise remain unexploited. However, many universities face difficulties in creating spin-offs. This article adopts a science-based design approach to connect scholarly research with

Creating university spin-offs : a science-based design perspective

NARCIS (Netherlands)

Burg, van J.C.; Romme, A.G.L.; Gilsing, V.A.; Reymen, I.M.M.J.; Dan Remenyi, xx

2007-01-01

Academic entrepreneurship by means of university spin-offs commercializes technological breakthroughs, which may otherwise remain unexploited. However, many universities face difficulties in creating spin-offs. This article adopts a science-based design approach, to connect scholarly research with

Studies on design principles and criteria of fuels and graphites for experimental multi-purpose very high temperature reactor

International Nuclear Information System (INIS)

Arai, Taketoshi; Sato, Sadao; Tani, Yutaro

1977-12-01

Design principles and criteria of fuels and graphites have been studied to determine the main design parameters of a reference core MARK-III of the Experimental Multi-purpose Very High Temperature Reactor. The present status of research and development for HTGR fuels and graphites is reviewed from a standpoint of their integrity and safety aspects, and is compared to the specific design requirements for the VHTR fuels and graphites. Consequently, reasonable materials specifications, safety criteria and design analysis methods are presented for coated fuel particle, fuel compact, graphite sleeve, core support graphite and neutron absorber material. These design principles and criteria will be refined by further experimental investigations. (auth.)

Pedagogical Principles in Online Teaching

DEFF Research Database (Denmark)

Beckmann, Suzanne C.; Uth Thomsen, Thyra; von Wallpach, Sylvia

of the seven pedagogical principles that govern the teaching at our university. We also present a case study that illustrates how both opportunities and challenges were met in two “first-mover” fully online courses during Fall 2014. The experiences from this case study are discussed in terms of to what extent...... they met the pedagogical principles and observations unrelated to the pedagogical principle are shared....

Analog IC Design at the University of Twente

NARCIS (Netherlands)

Nauta, Bram

2007-01-01

This article describes some recent research results from the IC Design group of the University of Twente, located in Enschede, The Netherlands. Our research focuses on analog CMOS circuit design with emphasis on high frequency and broadband circuits. With the trend of system integration in mind, we

Intelligent instrumentation principles and applications

CERN Document Server

Bhuyan, Manabendra

2011-01-01

With the advent of microprocessors and digital-processing technologies as catalyst, classical sensors capable of simple signal conditioning operations have evolved rapidly to take on higher and more specialized functions including validation, compensation, and classification. This new category of sensor expands the scope of incorporating intelligence into instrumentation systems, yet with such rapid changes, there has developed no universal standard for design, definition, or requirement with which to unify intelligent instrumentation. Explaining the underlying design methodologies of intelligent instrumentation, Intelligent Instrumentation: Principles and Applications provides a comprehensive and authoritative resource on the scientific foundations from which to coordinate and advance the field. Employing a textbook-like language, this book translates methodologies to more than 80 numerical examples, and provides applications in 14 case studies for a complete and working understanding of the material. Beginn...

Design principles for riboswitch function.

Directory of Open Access Journals (Sweden)

Chase L Beisel

2009-04-01

Full Text Available Scientific and technological advances that enable the tuning of integrated regulatory components to match network and system requirements are critical to reliably control the function of biological systems. RNA provides a promising building block for the construction of tunable regulatory components based on its rich regulatory capacity and our current understanding of the sequence-function relationship. One prominent example of RNA-based regulatory components is riboswitches, genetic elements that mediate ligand control of gene expression through diverse regulatory mechanisms. While characterization of natural and synthetic riboswitches has revealed that riboswitch function can be modulated through sequence alteration, no quantitative frameworks exist to investigate or guide riboswitch tuning. Here, we combined mathematical modeling and experimental approaches to investigate the relationship between riboswitch function and performance. Model results demonstrated that the competition between reversible and irreversible rate constants dictates performance for different regulatory mechanisms. We also found that practical system restrictions, such as an upper limit on ligand concentration, can significantly alter the requirements for riboswitch performance, necessitating alternative tuning strategies. Previous experimental data for natural and synthetic riboswitches as well as experiments conducted in this work support model predictions. From our results, we developed a set of general design principles for synthetic riboswitches. Our results also provide a foundation from which to investigate how natural riboswitches are tuned to meet systems-level regulatory demands.

Designing a clinical skills training laboratory with focus on video for better learning

DEFF Research Database (Denmark)

Lauridsen, Henrik Hein; Toftgård, Rie Castella; Nørgaard, Cita

resources of varying quality on the internet if this is not made available during teaching. The objective of this project was to design a new clinical skills laboratory with IT and video facilities to support learning processes. Methods Teaching principles were described before decisions on the design......Objective The principles of apprenticeship in clinical skills training are increasingly being challenged. First, most students are proficient in learning from visual multimedia and will expect this to be part of a modern university education. Second, students will often find visual teaching...... on a priori described teaching and learning designs related to active learning principles. This was a complex process involving teachers, IT-experts, e-learning specialists and a variety of university employees....

IN QUEST OF TOTAL QUALITY MANAGEMENT PRINCIPLES IN ARCHITECTURAL DESIGN SERVICES: EVIDENCE FROM TURKEY

Directory of Open Access Journals (Sweden)

Umut Durmus

2010-12-01

Full Text Available Proposal: Architectural design companies increasingly recognize that time spent on management is not at the expense of their production and there are always better ways to organize business. Although architects have long placed a traditional emphasis on quality, quality management is still a new concept for the majority of architectural design companies, which have to organize relatively more complicated operations nowadays to meet their clients’ expectations. This study aims to understand how architectural design companies define quality and explores the extent to which Total Quality Management (TQM principles like continual improvement, employee involvement, customer satisfaction and others can be pertinent in these companies. Adopting a qualitative research strategy, the authors interviewed with the owner-managers of 10 widely-recognized architectural design companies of different size in Istanbul. The results from the content analysis of semi-structured interview data suggest that i TQM principles cannot be directly applied in architectural design companies without an appropriate translation; ii special characteristics of design services are important to explain quality-related perceptions of owner-managers; iii the owner-managers feel the pressure from the changing internal and external environmental conditions, however few of them adopt a systematic and documented approach to quality management. Architectural design offices which aim to establish a quality management system can benefit from this study to understand potential problem areas on their road.

The hybrid K-edge/K-XRF densitometer: Principles - design - performance

International Nuclear Information System (INIS)

Ottmar, H.; Eberle, H.

1991-02-01

The Euratom Safeguards Directorate (ESD) has recently installed a hybrid K-edge/K-XRF densitometer in a commerical reprocessing plant for the safeguarding of nuclear materials. This instrument, developed at KfK Karlsruhe, offers for the first time analytical measurement capabilities for timely on-site input accountancy verification. Lectures providing informations on measurement principles, instrument design features and performance data have been given to inspectors of ESD to make them familiar with the new instrument. This report summarizes the essential materials presented during these courses. (orig.) [de

Human Factors Principles in Design of Computer-Mediated Visualization for Robot Missions

Energy Technology Data Exchange (ETDEWEB)

David I Gertman; David J Bruemmer

2008-12-01

With increased use of robots as a resource in missions supporting countermine, improvised explosive devices (IEDs), and chemical, biological, radiological nuclear and conventional explosives (CBRNE), fully understanding the best means by which to complement the human operator’s underlying perceptual and cognitive processes could not be more important. Consistent with control and display integration practices in many other high technology computer-supported applications, current robotic design practices rely highly upon static guidelines and design heuristics that reflect the expertise and experience of the individual designer. In order to use what we know about human factors (HF) to drive human robot interaction (HRI) design, this paper reviews underlying human perception and cognition principles and shows how they were applied to a threat detection domain.

Blockchain to Rule the Waves - Nascent Design Principles for Reducing Risk and Uncertainty in Decentralized Environments

DEFF Research Database (Denmark)

Nærland, Kristoffer; Müller-Bloch, Christoph; Beck, Roman

2017-01-01

Many decentralized, inter-organizational environments such as supply chains are characterized by high transactional uncertainty and risk. At the same time, blockchain technology promises to mitigate these issues by introducing certainty into economic transactions. This paper discusses the findings...... of a Design Science Research project involving the construction and evaluation of an information technology artifact in collaboration with Maersk, a leading international shipping company, where central documents in shipping, such as the Bill of Lading, are turned into a smart contract on blockchain. Based...... on our insights from the project, we provide first evidence for preliminary design principles for applications that aim to mitigate the transactional risk and uncertainty in decentralized environments using blockchain. Both the artifact and the first evidence for emerging design principles are novel...

On Assessing the Costs and Benefits of Universal Design of ICT.

Science.gov (United States)

Halbach, Till; Fuglerud, Kristin Skeide

2016-01-01

In the ICT and IT domains, Universal Design is typically viewed as a burden and an expense, and its application is often justified only by ethics and/or legislation. Advocates for Universal Design (UD) are arguing that it is cost-effective, but so far there are few studies that document this in a detailed way. In this work, we discuss related research and studies dealing with the costs and benefits of accessible and usable ICT solutions. In particular, we discuss the findings regarding what is a universally designed solution, what is needed to make such a solution, how much does it cost, what impact can be anticipated by the extra effort, and how it can be measured. Finally, we suggest an approach for carrying out cost-benefit analyses of developing universally designed solutions. There is a weak indication that the economical benefits of UD solutions are much higher than the initial and running costs.

Personnel Selection Using Fuzzy Axiomatic Design Principles

Directory of Open Access Journals (Sweden)

Anant V. Khandekar

2016-09-01

Full Text Available Overall competency of the working personnel is often observed to ultimately affect the productivity of an organization. The globalised competitive atmosphere coupled with technological improvements demands for efficient and specialized manpower for the industrial operations. A set of typical technological skills and attitudes is thus demanded for every job profile. Most often, these skills and attitudes are expressed imprecisely and hence, necessitating the support of fuzzy sets for their effective understanding and further processing. In this paper, a method based on fuzzy axiomatic design principles is applied for solving the personnel selection problems. Selecting a middle management staff of a service department for a large scale organization is demonstrated here as a real life example. Five shortlisted candidates are assessed with respect to a set of 18 evaluation criteria, and the selection committee with experts from the related fields also realizes the outcome of the adopted approach to be quite appropriate, befitting and in agreement with their expectations.

Materials design principles of ancient fish armour

Science.gov (United States)

Bruet, Benjamin J. F.; Song, Juha; Boyce, Mary C.; Ortiz, Christine

2008-09-01

Knowledge of the structure-property-function relationships of dermal scales of armoured fish could enable pathways to improved bioinspired human body armour, and may provide clues to the evolutionary origins of mineralized tissues. Here, we present a multiscale experimental and computational approach that reveals the materials design principles present within individual ganoid scales from the `living fossil' Polypterus senegalus. This fish belongs to the ancient family Polypteridae, which first appeared 96 million years ago during the Cretaceous period and still retains many of their characteristics. The mechanistic origins of penetration resistance (approximating a biting attack) were investigated and found to include the juxtaposition of multiple distinct reinforcing composite layers that each undergo their own unique deformation mechanisms, a unique spatial functional form of mechanical properties with regions of differing levels of gradation within and between material layers, and layers with an undetectable gradation, load-dependent effective material properties, circumferential surface cracking, orthogonal microcracking in laminated sublayers and geometrically corrugated junctions between layers.

Engageability: a new sub-principle of the learnability principle in human-computer interaction

Directory of Open Access Journals (Sweden)

B Chimbo

2011-12-01

Full Text Available The learnability principle relates to improving the usability of software, as well as users’ performance and productivity. A gap has been identified as the current definition of the principle does not distinguish between users of different ages. To determine the extent of the gap, this article compares the ways in which two user groups, adults and children, learn how to use an unfamiliar software application. In doing this, we bring together the research areas of human-computer interaction (HCI, adult and child learning, learning theories and strategies, usability evaluation and interaction design. A literature survey conducted on learnability and learning processes considered the meaning of learnability of software applications across generations. In an empirical investigation, users aged from 9 to 12 and from 35 to 50 were observed in a usability laboratory while learning to use educational software applications. Insights that emerged from data analysis showed different tactics and approaches that children and adults use when learning unfamiliar software. Eye tracking data was also recorded. Findings indicated that subtle re- interpretation of the learnability principle and its associated sub-principles was required. An additional sub-principle, namely engageability was proposed to incorporate aspects of learnability that are not covered by the existing sub-principles. Our re-interpretation of the learnability principle and the resulting design recommendations should help designers to fulfill the varying needs of different-aged users, and improve the learnability of their designs. Keywords: Child computer interaction, Design principles, Eye tracking, Generational differences, human-computer interaction, Learning theories, Learnability, Engageability, Software applications, Uasability Disciplines: Human-Computer Interaction (HCI Studies, Computer science, Observational Studies

The concept and principles of sustainable architectural design for national parks in Serbia

OpenAIRE

Milošević Predrag

2004-01-01

The paper elaborates the concept of sustainable architectural design that has come to the forefront in the last 20 years, and in the light of the National Park. This concept recognizes that human civilization is an integral part of the natural world and that nature must be preserved and perpetuated if the human community itself is to survive. Sustainable design articulates this idea through developments that exemplify the principles of conservation and encourage the application of those princ...

Outline of principle of design construction of demolished concrete from electric power plant

International Nuclear Information System (INIS)

Takahashi, Tomohiko; Sakagami, Takeharu; Inagaki, Hirokazu; Morozumi, Hironori; Muranaka, Kenji

2005-01-01

'The principle of design construction of recycled demolished concrete from electric power plant' (a plan) is going to be published by TSCE Concrete Committee in 2005. The abstract of the above principle is described. A large amount of demolished concrete is generated by decommissioning of atomic power plant. About 450,000 to 500,000t of concrete with small radiation level per an atomic power plant will be generated. This report included decommissioning of Tokai power plant, characteristics of subject of demolished concrete, the recycled demolished concrete, fresh conditions of the recycled demolished concrete, the strength, deformation properties, durability, alkali silica reactivity of them and control measurement. (S.Y.)

Mapping of the Universe of Knowledge in Different Classification Schemes

Directory of Open Access Journals (Sweden)

M. P. Satija

2017-06-01

Full Text Available Given the variety of approaches to mapping the universe of knowledge that have been presented and discussed in the literature, the purpose of this paper is to systematize their main principles and their applications in the major general modern library classification schemes. We conducted an analysis of the literature on classification and the main classification systems, namely Dewey/Universal Decimal Classification, Cutter’s Expansive Classification, Subject Classification of J.D. Brown, Colon Classification, Library of Congress Classification, Bibliographic Classification, Rider’s International Classification, Bibliothecal Bibliographic Klassification (BBK, and Broad System of Ordering (BSO. We conclude that the arrangement of the main classes can be done following four principles that are not mutually exclusive: ideological principle, social purpose principle, scientific order, and division by discipline. The paper provides examples and analysis of each system. We also conclude that as knowledge is ever-changing, classifications also change and present a different structure of knowledge depending upon the society and time of their design.

Geothermal power plants principles, applications, case studies and environmental impact

CERN Document Server

DiPippo, Ronald

2008-01-01

Ron DiPippo, Professor Emeritus at the University of Massachusetts Dartmouth, is a world-regarded geothermal expert. This single resource covers all aspects of the utilization of geothermal energy for power generation from fundamental scientific and engineering principles. The thermodynamic basis for the design of geothermal power plants is at the heart of the book and readers are clearly guided on the process of designing and analysing the key types of geothermal energy conversion systems. Its practical emphasis is enhanced by the use of case studies from real plants that increase the reader'

Mach's principle and space-time structure

International Nuclear Information System (INIS)

Raine, D.J.

1981-01-01

Mach's principle, that inertial forces should be generated by the motion of a body relative to the bulk of matter in the universe, is shown to be related to the structure imposed on space-time by dynamical theories. General relativity theory and Mach's principle are both shown to be well supported by observations. Since Mach's principle is not contained in general relativity this leads to a discussion of attempts to derive Machian theories. The most promising of these appears to be a selection rule for solutions of the general relativistic field equations, in which the space-time metric structure is generated by the matter content of the universe only in a well-defined way. (author)

Zebrafish housing systems: a review of basic operating principles and considerations for design and functionality.

Science.gov (United States)

Lawrence, Christian; Mason, Timothy

2012-01-01

The strategies for housing zebrafish used in biomedical research have evolved considerably over the past three decades. To keep pace with the rapid expansion and development of the zebrafish model system, the field has generally moved from keeping fish at the level of aquarium hobbyist to that of industrialized, recirculating aquaculture. Numerous commercial system vendors now offer increasingly sophisticated housing systems based on design principles that maximize the number of animals that can be housed in a given space footprint, and they are thus able to support large and diverse research programs. This review is designed to provide managers, lab animal veterinarians, investigators, and other parties responsible for care and use of these animals with a comprehensive overview of the basic operating and design principles of zebrafish housing systems. This information can be used to help plan the construction of new facilities and/or the upgrade and maintenance of existing operations.

Perceptions of Pre-Service Teachers on the Design of a Learning Environment Based on the Seven Principles of Good Practice

Science.gov (United States)

Al-Furaih, Suad Abdul Aziz

2017-01-01

This study explored the perceptions of 88 pre-service teachers on the design of a learning environment using the Seven Principles of Good Practice and its effect on participants' abilities to create their Cloud Learning Environment (CLE). In designing the learning environment, a conceptual model under the name 7 Principles and Integrated Learning…

Design principles and issues of rights expression languages for digital rights management

Science.gov (United States)

Wang, Xin

2005-07-01

Digital rights management (DRM) provides a unified approach to specifying, interpreting, enforcing and managing digital rights throughout the entire life cycle of digital assets. Using a declarative rights expression language (REL) for specifying rights and conditions in the form of licenses, as opposite to some other approaches (such as data structures and imperative languages), has been considered and adopted as a superior technology for implementing effective, interoperable and scalable DRM systems. This paper discusses some principles and issues for designing RELs, based on the experiences of developing a family of REL"s (DPRL, XrML 1.x, XrML 2.0 and MPEG REL). It starts with an overview of a family tree of the past and current REL"s, and their development history, followed by an analysis of their data models and a comparison with access-control oriented models. It then presents a number of primary design principles such as syntactic and semantic un-ambiguity, system interoperability, expressiveness in supporting business models and future extensibility, and discusses a number of key design issues such as maintaining stateful information, multi-tier issuance of rights, meta rights, identification of individual and aggregate objects, late-binding of to-beidentified entities, as well as some advanced ones on revocation and delegation of rights. The paper concludes with some remarks on REL profiling and extension for specific application domains.

41 CFR 102-76.55 - What sustainable development principles must Federal agencies apply to the siting, design, and...

Science.gov (United States)

2010-07-01

... and Construction Sustainable Development § 102-76.55 What sustainable development principles must... Acquisition,” Federal agencies must apply sustainable development principles to the siting, design, and... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false What sustainable...

The concept and principles of sustainable architectural design for national parks in Serbia

Directory of Open Access Journals (Sweden)

Milošević Predrag

2004-01-01

Full Text Available The paper elaborates the concept of sustainable architectural design that has come to the forefront in the last 20 years, and in the light of the National Park. This concept recognizes that human civilization is an integral part of the natural world and that nature must be preserved and perpetuated if the human community itself is to survive. Sustainable design articulates this idea through developments that exemplify the principles of conservation and encourage the application of those principles in our daily lives. A corollary concept, and one that supports sustainable design, is that of bio-regionalism - the idea that all life is established and maintained on a functional community basis and that all of these distinctive communities (bio-regions have mutually supporting life systems that are generally self-sustaining. The concept of sustainable design holds that future technologies must function primarily within bioregional patterns and scales. They must maintain biological diversity and environmental integrity contribute to the health of air, water, and soils, incorporate design and construction that reflect bio-regional conditions, and reduce the impacts of human use. Sustainable design, sustainable development, design with nature environmentally sensitive design, holistic resource management - regardless of what it's called, "sustainability," the capability of natural and cultural systems being continued over time, is the key. Sustainable design must use an alternative approach to traditional design and the new design approach must recognize the impacts of every design choice on the natural and cultural resources of the local, regional, and global environments. Sustainable park and recreation development will succeed to the degree that it anticipates and manages human experiences. Interpretation provides the best single tool for shaping experiences and sharing values. By providing an awareness of the environment, values are taught that are

Sustainable Leadership: Honeybee Practices at Thailand's Oldest University

Science.gov (United States)

Kantabutra, Sooksan; Saratun, Molraudee

2013-01-01

Purpose: The aim of this paper is to adopt Avery and Bergsteiner's 23 sustainable leadership practices derived from sustainable organizations as a framework to examine the leadership practices of Thailand's oldest university. Design/methodology/approach: Avery and Bergsteiner's principles were grouped into six categories for analysis: long-term…

Silver Nanoclusters: From Design Principles to Practical Applications

KAUST Repository

Abdulhalim, Lina G.

2015-12-08

A strategy based on reticulating metal ions and organic ligands into atomically precise gold and silver nanoclusters (NCs) with high monodispersity has been advanced to a point that allows the design of NCs with strict stoichiometries, functionalities and valence. Of the Ag NCs discovered, Ag44 is the most studied, not only due to its high absorption that transcends the visible spectrum suitable for photovoltaics but also because of its long excited state lifetime, as revealed by nanosecond transient absorption spectroscopy. A major principle discovered in this dissertation is the ability to produce Ag44 in scalable amounts and with high stability in addition to modulation of the functional groups of the organic ligands via a fast and complete ligand exchange process. This new discovery has led to the development of synthetic designs in which new sizes were obtained by varying the reaction parameters (e.g., ligands functionality, reaction temperature and time), namely, Ag29 using dithiols and phosphines. The synthesized NCs possess tetravalent functionalities that facilitate their crystallization and characterization. Furthermore, Ag29 glows red and is therefore a possible candidate for sensing and imaging applications.

USING THE PRINCIPLES OF TRANSFORMATION IN THE DEVELOPMENT OF NEW DESIGN CLOTHES-MAKING FOR WOMEN

Directory of Open Access Journals (Sweden)

IROVAN Marcela

2016-05-01

Full Text Available The transformable garments represent an actual group in the assortment of contemporary clothing, providing wide possibilities of obtaining multifunctional shapes. The work presents the results of theoretical and applied research in the design of garments with flexible structure for women. The scope of study consists in the analysis of possibilities to develop modern assortments of garments for women by using morphological transformation techniques. The transformable products include an ensemble of garments designed with diverse techniques and methods, both traditional and non-traditional. The morphological transformation techniques are based on the principles of reconstruction and transformation, facilitating the transformation of one product shape into another and transformation of elements in the interior of the same shape. The study has defined several development directions for transformable products in the actual wardrobe: products made with two different texture, color and structure faces; products with attachable or detachable elements; products with a separate structure that by location, wrapping or connection of elements allow to obtain diverse shapes; products with changing shapes with the aid of various types of accessories; multifunctional product elements. The experimental studies were aimed at the elaboration of assortments of garments for women by applying the morphological transformation procedures with elaboration and manufacturing of models of transformable skirts for women. The transformable models demonstrate the universality of products, their functional possibilities, capacity to change the external appearance and aesthetic properties. When designing women’s skirts one may use all types of transformation, several types of transformation may be used in one product simultaneously thus achieving several functional scopes.

Towards automating the discovery of certain innovative design principles through a clustering-based optimization technique

Science.gov (United States)

Bandaru, Sunith; Deb, Kalyanmoy

2011-09-01

In this article, a methodology is proposed for automatically extracting innovative design principles which make a system or process (subject to conflicting objectives) optimal using its Pareto-optimal dataset. Such 'higher knowledge' would not only help designers to execute the system better, but also enable them to predict how changes in one variable would affect other variables if the system has to retain its optimal behaviour. This in turn would help solve other similar systems with different parameter settings easily without the need to perform a fresh optimization task. The proposed methodology uses a clustering-based optimization technique and is capable of discovering hidden functional relationships between the variables, objective and constraint functions and any other function that the designer wishes to include as a 'basis function'. A number of engineering design problems are considered for which the mathematical structure of these explicit relationships exists and has been revealed by a previous study. A comparison with the multivariate adaptive regression splines (MARS) approach reveals the practicality of the proposed approach due to its ability to find meaningful design principles. The success of this procedure for automated innovization is highly encouraging and indicates its suitability for further development in tackling more complex design scenarios.

Design principles and fundamental trade-offs in biomimetic light harvesting

International Nuclear Information System (INIS)

Sarovar, Mohan; Birgitta Whaley, K

2013-01-01

Recent developments in synthetic and supramolecular chemistry have created opportunities to design organic systems with tailored nanoscale structure for various technological applications. A key application area is the capture of light energy and its conversion into electrochemical or chemical forms for photovoltaic or sensing applications. In this work we consider cylindrical assemblies of chromophores that model structures produced by several supramolecular techniques. Our study is especially guided by the versatile structures produced by virus-templated assembly. We use a multi-objective optimization framework to determine design principles and limitations in light harvesting performance for such assemblies, both in the presence and absence of disorder. We identify a fundamental trade-off in cylindrical assemblies that is encountered when attempting to maximize both efficiency of energy transfer and absorption bandwidth. We also rationalize the optimal design strategies and provide explanations for why various structures provide optimal performance. Most importantly, we find that the optimal design strategies depend on the amount of energetic and structural disorder in the system. The aim of these studies is to develop a program of quantum-informed rational design for construction of organic assemblies that have the same degree of tailored nanoscale structure as biological photosynthetic light harvesting complexes, and consequently have the potential to reproduce their remarkable light harvesting performance. (paper)

For the Problem of Knowledge of the Universe

Science.gov (United States)

Kalanov, Temur Z.

2003-04-01

A new approach to the problem of knowledge of the Universe is suggested. This approach represents the new point of view which has arisen from the critical analysis of the foundations of physics, cosmology and philosophy (dialectical materialism). The principal idea following from the analysis is that only concepts (categories) and principles of dialectics are a basis of the correct theory of the Universe. The foundation of the correct theory is represented by the following philosophical principles. (a) The principle of materiality (objective reality) of the Nature: the Nature (Universe) is a system (set) of material objects (particles, bodies, fields). (b) The principle of existence of material object: an object exists as the objective reality, and movement is a form of existence of object. (c) The principle (definition) of movement of object: the movement is change (i.e. transition of some states into others) in general; the movement determines a direction, and direction characterizes the movement. (d) The principle of existence of time: the time exist as the parameter of the system of reference. (e) The principle of unity of opposites. (In particular, it means that the opposites are bounds of each other. In other words, if a class is divided into two non intersecting (opposite) subclasses, then each subclass is a bound another). (f) System principle: the properties of the system are not logical consequence, corollary of the properties of the elements of the system. These principles result in the following main statements about the Nature (Universe). The Universe does not contain subset of non objects (i.e. empty subset). Therefore, in accordance with (e), the Universe has no objective bound. It means that size (radius), mass, energy are not parameters of the Universe (i.e. size, mass, energy have physical meaning only in the case of limited objects). Consequences. (1) The generally accepted theories of evolution of the Universe (for example, Big Bang Theory) are

Universal principles governing multiple random searchers on complex networks: The logarithmic growth pattern and the harmonic law

Science.gov (United States)

Weng, Tongfeng; Zhang, Jie; Small, Michael; Harandizadeh, Bahareh; Hui, Pan

2018-03-01

We propose a unified framework to evaluate and quantify the search time of multiple random searchers traversing independently and concurrently on complex networks. We find that the intriguing behaviors of multiple random searchers are governed by two basic principles—the logarithmic growth pattern and the harmonic law. Specifically, the logarithmic growth pattern characterizes how the search time increases with the number of targets, while the harmonic law explores how the search time of multiple random searchers varies relative to that needed by individual searchers. Numerical and theoretical results demonstrate these two universal principles established across a broad range of random search processes, including generic random walks, maximal entropy random walks, intermittent strategies, and persistent random walks. Our results reveal two fundamental principles governing the search time of multiple random searchers, which are expected to facilitate investigation of diverse dynamical processes like synchronization and spreading.

Universal Design as a Booster for Housing Quality and Architectural Practice.

Science.gov (United States)

Denizou, Karine

2016-01-01

Norwegian central government has for the last decade increasingly focused on universal design. Fundamental changes in the Norwegian building code and corresponding regulations in 2010 give an apparently clear framework for the implementation of accessibility and universal design. However, it seems that neither increased awareness of accessibility requirements and universal design, nor compliance with the building code guarantees improvement of housing quality and usability. The Norwegian regulations have gone further in the direction of performance requirements than most other countries. This applies to all types of requirements, including requirements for usability, functionality and accessibility. Hardly any specifications are to be found in the regulations. Ideally, this lack of specifications should give designers the opportunity to develop innovative answers and hence to respond to different contexts and needs. Still, many architects and builders ask for clear specifications, in order to simplify and speed up design processes and make control of solutions easier. Many architects understand guidelines as minimum requirements, and are thus reproducing the identical solutions without considering the context and the needs of the users. They see accessibility as another regulatory pressure and requirements as restrictions rather than positive incentives. However, there are examples of designers who have internalised the regulatory framework and thus are able to create and integrate inclusive design in their daily work. Based on recent research conducted by SINTEF Building and Infrastructure and financed by the Norwegian State Housing Bank, this paper presents examples of practice where dwellings have been developed within a framework of universal design. Focus of the research has been on the approach of the design team and their understanding and use of the regulatory framework in order to create better homes in dialogue with the building authorities. Main

The role of simulation in designing for universal access

DEFF Research Database (Denmark)

Keates, Simeon; Looms, Peter

2014-01-01

the difficulty of finding and recruiting suitable participants. Simulation aids offer a potentially cost-effective replacement or complement to participatory design. This paper examines a number of the issues associated with the use of simulation aids when designing for Universal Access. It concludes...

Digital Hardware Design Teaching: An Alternative Approach

Science.gov (United States)

Benkrid, Khaled; Clayton, Thomas

2012-01-01

This article presents the design and implementation of a complete review of undergraduate digital hardware design teaching in the School of Engineering at the University of Edinburgh. Four guiding principles have been used in this exercise: learning-outcome driven teaching, deep learning, affordability, and flexibility. This has identified…

TOUCH POINTS IN UNIVERSITY TUITION - CRITICAL REFLECTIONS ON PBL TUITION PRACTICE AT THE ARCHITECTURE AND URBAN DESIGN PROGRAMMES AT AALBORG UNIVERSITY, DENMARK

Directory of Open Access Journals (Sweden)

Anne Kirkegaard Bejder

2017-01-01

Full Text Available This is a discussion paper that is based on the didactics reflections of three junior academics at the Architecture and Urban Design (A&UD programme at Aalborg University. The discussion is moored in two narratives representing two typical student tuition situations. Unfolding two touch points where PBL and architectural and engineering teaching converge, this paper discusses how ‘the problem’ and ‘supervision’ at the A&UD programme are hybrid tuition focus points, where principles of PBL and more traditional tuition styles within architecture and engineering come into contact and cause didactic friction. This friction necessitates teachers and supervisors to critically reflect upon their teaching and supervision styles, and upon how ‘the problem’ is put into play in their tuition of students. The paper argues that teachers and supervisors have a heightened obligation and responsibility to monitor, assess, reflect and adjust the integration of the different teaching approaches in their hybrid tuition practices at A&UD.

Using "First Principles of Instruction" to Design Secondary School Mathematics Flipped Classroom: The Findings of Two Exploratory Studies

Science.gov (United States)

Lo, Chung Kwan; Hew, Khe Foon

2017-01-01

Flipping the classroom is a current pedagogical innovation in many schools and universities. Although interest in flipped classroom (or Inverted Classroom) continues to grow, its implementation so far has been driven more by teachers' intuitive beliefs, rather than empirically-based principles. Many studies merely replace in-class instructions…

Principles of crystallization, and methods of single crystal growth

International Nuclear Information System (INIS)

Chacra, T.

2010-01-01

Most of single crystals (monocrystals), have distinguished optical, electrical, or magnetic properties, which make from single crystals, key elements in most of technical modern devices, as they may be used as lenses, Prisms, or grating sin optical devises, or Filters in X-Ray and spectrographic devices, or conductors and semiconductors in electronic, and computer industries. Furthermore, Single crystals are used in transducer devices. Moreover, they are indispensable elements in Laser and Maser emission technology.Crystal Growth Technology (CGT), has started, and developed in the international Universities and scientific institutions, aiming at some of single crystals, which may have significant properties and industrial applications, that can attract the attention of international crystal growth centers, to adopt the industrial production and marketing of such crystals. Unfortunately, Arab universities generally, and Syrian universities specifically, do not give even the minimum interest, to this field of Science.The purpose of this work is to attract the attention of Crystallographers, Physicists and Chemists in the Arab universities and research centers to the importance of crystal growth, and to work on, in the first stage to establish simple, uncomplicated laboratories for the growth of single crystal. Such laboratories can be supplied with equipment, which are partly available or can be manufactured in the local market. Many references (Articles, Papers, Diagrams, etc..) has been studied, to conclude the most important theoretical principles of Phase transitions,especially of crystallization. The conclusions of this study, are summarized in three Principles; Thermodynamic-, Morphologic-, and Kinetic-Principles. The study is completed by a brief description of the main single crystal growth methods with sketches, of equipment used in each method, which can be considered as primary designs for the equipment, of a new crystal growth laboratory. (author)

The effect of implementing cognitive load theory-based design principles in virtual reality simulation training of surgical skills: a randomized controlled trial

DEFF Research Database (Denmark)

Andersen, Steven Arild Wuyts; Mikkelsen, Peter Trier; Konge, Lars

2016-01-01

Cognitive overload can inhibit learning, and cognitive load theory-based instructional design principles can be used to optimize learning situations. This study aims to investigate the effect of implementing cognitive load theory-based design principles in virtual reality simulation training...

SYSTEMATIC PRINCIPLES AND METHODS OF SYMBOLIC APPROACHES IN URBAN DESIGN

Directory of Open Access Journals (Sweden)

BULAKH I. V

2015-12-01

Full Text Available Formulation of the problem. The low level of expression and personalization of mass architecture of the second half of the twentieth century connected with the spread of industrial technology and even to a greater extent with mechanistic traditionally functional relation to the average person as, abstract consumer architecture. The condition out of the critical situation is focusing on matters aesthetic, artistic understanding and harmonious image creation environment. The problem of increasing architectural and artistic level of architectural and urban planning solutions to overcome the monotony of planning and development, creating aesthetically expressive urban environment does not lose relevance over the past decades. Understanding and acceptance of enigma and dynamic development of cities encourage architects to find new design techniques that are able to provide in the future a reasonable possibility of forming artistic and aesthetic image of the modern city. Purpose. Define and systematize the principles of symbolization architectural and planning images; propose methods symbolism in the architectural planning of image of the urban environment. Conclusion based on analysis of the enhanced concept symbolizing the image of Architecture and Planning, the place, role and symbolization trends at all levels of the urban environment - planning, three-dimensional and improvement of urban areas; first identified the main stages and levels of symbolization (analohyzatsyya, schematization and alehoryzatsiya, their features and characteristics, formulated the basic principles of symbolization architectural and planning of image, namely the principles of communication between figurative analogies, transformation of subsequent circuits, switching allegorical groupings and metamorfizm ultimate goal – symbol birth .

Designation and Implementation of Microcomputer Principle and Interface Technology Virtual Experimental Platform Website

Science.gov (United States)

Gao, JinYue; Tang, Yin

This paper explicitly discusses the designation and implementation thought and method of Microcomputer Principle and Interface Technology virtual experimental platform website construction. The instructional design of this platform mainly follows with the students-oriented constructivism learning theory, and the overall structure is subject to the features of teaching aims, teaching contents and interactive methods. Virtual experiment platform production and development should fully take the characteristics of network operation into consideration and adopt relevant technologies to improve the effect and speed of network software application in internet.

‘Nature’ as a humanistic principle of universal communication? A European case study regarding natural law

Directory of Open Access Journals (Sweden)

Georg Essen

2006-04-01

Full Text Available The conference, “Humankind at the Intersection of Nature and Culture”, presented in the Kruger National Park in South Africa, forms part of the project “Humanism in the era of globalisation: An intercultural dialogue on culture, humanity and values”. This project works on the premise that there is a “need for a new kind of humanism, the aim is to create an understanding of humankind in an era of globalisation that encompasses all civilisations while at the same time emphasising their particularity and diversity”. Among the problems of an intercultural hermeneutics that have been in discussion, and that we should regard as essential to the understanding of humanism demanded here, there belongs the basic intuition that there needs to be universally valid norms and values that are based upon mutual recognition of cultural diversity. In order to establish such basic norms, humanism has to appeal to basic anthropological principles that can make a claim to cross-cultural legitimacy. On the one hand, the justificatory ground discerned in these principles must be unconditional and universalisable. On the other hand, these basic anthropological principles have to be evident and intelligible within each culture’s horizon of understanding. The determining ground of the will, through which each human being can endorse this set of norms, has to be compatible with his, or her, free consent.

Recommendations for sex/gender neuroimaging research: Key principles and implications for research design, analysis and interpretation

Directory of Open Access Journals (Sweden)

Gina eRippon

2014-08-01

Full Text Available For over a decade, neuroimaging (NI technologies have had an increasing impact in the study of complex cognitive and social processes. In this emerging field of social cognitive neuroscience, a central goal should be to increase the understanding of the interaction between the neurobiology of the individual and the environment in which s/he develops and functions. The study of the relationship between sex and gender could offer a valuable example of such research. We identify here four main principles that should inform NI research. First, the principle of overlap, arising from evidence of significant overlap of female/male distributions on measures of many gendered behaviours. Second, the principle of mosaicism, arising from evidence that for both behaviour and brain, each individual manifests a complex and idiosyncratic combination of feminine and masculine characteristics. Third, the principle of contingency, arising from evidence that female/male behavioural differences are contingent on time, place, social group and context. Fourth, the principle of entanglement, arising from an awareness that the neural phenotypes that NI techniques measure are a function of the interactive and reciprocal influence of biology and environment. These important principles have emerged and become well-established over the past few decades, but their implications are often not reflected in the design and interpretation of NI sex/gender research. We therefore offer a set of guidelines for researchers to ensure that NI sex/gender research is appropriately designed and interpreted. We hope this ‘toolkit’ will also be of use to editorial boards and journal reviewers, as well as those who view, communicate and interpret such research.

How University Teachers Design Assessments: A Cross-Disciplinary Study

Science.gov (United States)

Bearman, Margaret; Dawson, Phillip; Bennett, Sue; Hall, Matt; Molloy, Elizabeth; Boud, David; Joughin, Gordon

2017-01-01

There are dissonances between educators' aspirations for assessment design and actual assessment implementation in higher education. Understanding how assessment is designed "on the ground" can assist in resolving this tension. Thirty-three Australian university educators from a mix of disciplines and institutions were interviewed. A…

Peer assessment in university teaching: Evaluating seven course designs

NARCIS (Netherlands)

van den Berg, I.|info:eu-repo/dai/nl/288125797; Admiraal, W.|info:eu-repo/dai/nl/120226340; Pilot, A.|info:eu-repo/dai/nl/068350880

2006-01-01

Peer assessment in university teaching: evaluating seven course designs Abstract Peer assessment is understood to be an arrangement with students assessing the quality of their fellow students’ writings and giving feedback to each other. This multiple-case study of seven designs of peer assessment

Designing informal learning spaces using student perspectives

Directory of Open Access Journals (Sweden)

Matthew David Riddle

2012-06-01

Full Text Available This article describes the design of informal learning spaces at an Australian university that support students in the generation of knowledge. Recent learning space design projects at La Trobe have been informed by a number of pre-existing projects, including a small research project on student use of technologies, a national project on learning space design, and a significant curriculum renewal process at the university. It demonstrates the ways in which evidence based on student perspectives and principles developed through applied research in teaching and learning can inform real world learning space design projects in a higher education context.

FRAMEWORK FOR A CROSS-BORDER TRANSDISCIPLINARY DESIGN STUDIO EDUCATION

Directory of Open Access Journals (Sweden)

Rahinah Ibrahim

2007-11-01

Full Text Available This paper presents a conceptual framework for an architectural construction integration (A-CI design studio curriculum in the context of an architectural graduate program. It aims to apply trans-disciplinary principles to educate competent graduates in sustainable global design-build practice. The A-CI curriculum emulates the computer-integrated Project Based Learning Laboratory (PBL model developed at Stanford University by building on the PBL’s framework, and principles of learning and teaching professional, cultural, technological, and spatial differences amongst the building stakeholders. We extend it to include a project’s financial and regulatory decision-making process along the planning and architectural design processes at the earlier project development life-cycle phases. The paper will first present the literature review on transdisciplinary learning, followed by a description on the framework and principles of the PBL model before proposing how we extend the PBL model to integrate the early architectural design phase. The proposed program’s framework covers a four-semester curriculum at graduate level during which, students from participating universities in developing countries have the opportunity to participate in a global building project with students from participating universities in developed countries. An additional benefit of this curriculum is that it would allow students from both developing and developed countries to experience cross-border trans-disciplinary learning and teaching.

Filtration Systems Design for Universal Oils in Agricultural Tractors

Directory of Open Access Journals (Sweden)

R. Majdan

2017-12-01

Full Text Available Three filtration systems using the tractor hydraulic circuit were proposed and verified during the tractors operation. Using the tractor-implement hydraulic system and filter body with accessories the universally useful filtration systems were designed. The designed filtration systems are the second stage of universal oil filtration whereas the first stage is the standard tractor filter. The decrease in the content of iron reached the values 25.53 %, 32.95 % and 41.55 % and the average decrease in oil contamination characterized by average value of decrease in content of iron, copper and silicium reached values 24.3 %, 24.7 % and 35.53 % in dependence on the filtration system and an oil contamination level. The decrease in contamination level verified the ability of designed filtration systems for agricultural tractors.

Control room philosophy: Principles of control room design and control room work

International Nuclear Information System (INIS)

Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla

2006-01-01

In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages

Design Principles for Rapid Prototyping Forces Sensors using 3D Printing.

Science.gov (United States)

Kesner, Samuel B; Howe, Robert D

2011-07-21

Force sensors provide critical information for robot manipulators, manufacturing processes, and haptic interfaces. Commercial force sensors, however, are generally not adapted to specific system requirements, resulting in sensors with excess size, cost, and fragility. To overcome these issues, 3D printers can be used to create components for the quick and inexpensive development of force sensors. Limitations of this rapid prototyping technology, however, require specialized design principles. In this paper, we discuss techniques for rapidly developing simple force sensors, including selecting and attaching metal flexures, using inexpensive and simple displacement transducers, and 3D printing features to aid in assembly. These design methods are illustrated through the design and fabrication of a miniature force sensor for the tip of a robotic catheter system. The resulting force sensor prototype can measure forces with an accuracy of as low as 2% of the 10 N measurement range.

Service-Learning and Integrated Course Redesign: Principles of Management and the Campus Kitchen Metaproject

Science.gov (United States)

Flannery, Brenda L.; Pragman, Claudia H.

2010-01-01

This article describes the process of redesigning a Principles of Management course to integrate a service-learning metaproject. The metaproject was Campus Kitchen, a food recovery and delivery program operated on a handful of university campuses across the United States. We used L. Dee Fink's integrated course design approach as well as systems…

INFORMATION SYSTEM DESIGN OF PERFORMANCE ACHIEVEMENTS MONITORING IN THE UNIVERSITY: A CASE STUDY IN BINUS UNIVERSITY

Directory of Open Access Journals (Sweden)

Irma Irawati Ibrahim

2012-05-01

Full Text Available Dashboard is a computer interface that displays a variety of charts, graphs, tables, which are selected reports from various data that are considered important to display rapidly, with an attractive appearance, dynamic, and relevant so that it can immediately be seen quickly to analyze a condition. Dashboard information system is widely used in various companies as a support system for decision-making where Dashboard usually displays data business trends of the company or the achievement of KPI (Key Performance Indicator of a company. The method used is descriptive analysis by means of collecting information that areimportant for universities to be considered asthe Key Success Factors (KSF of the university, and then, the design of the dashboard is made in accordance with these important factors.The result of this study is a grand design of information systems for the university performance monitoring, starting from the reception of students, faculty performance, student academic achievement, effectiveness and efficiency of services, including graduates. It is expected that by the time the system has been fully implemented, the university can take action quickly and accurately with respect to the required conditions.Keywords: Information System Dashboard; Dashboard; Academic Dashboard; University Dashboard

Basic Principles of Industrial Electric Power Network Computer Aided Design and Engineering

Directory of Open Access Journals (Sweden)

M. I. Fursanov

2012-01-01

Full Text Available A conceptual model for a computer aided design and engineering system has been developed in the paper. The paper presents basic automation process principles including a graphical representation   network and calculation results, convenient user interface, automatic mode calculation, selection of transformer rated power and cross-section area of wires. The developed algorithm and program make it possible to save time and improve quality of project implementation.

PBMR phase 1 study: Seismic and structural design consideration - An overview of principles

International Nuclear Information System (INIS)

Wium, D.J.W.

1997-01-01

This paper briefly reviews the principles involved in the planning and design of the proposed facility to cater for seismic and structural loads. The conceptual layout is discussed, as well as the different load characteristics and scenarios. An outline is given of model used to estimate the seismic loads, whereafter the different analytical models are discussed. (author)

Code of practice and design principles for portable and transportable radiological protection systems

International Nuclear Information System (INIS)

Wells, F.H.; Powell, R.G.

1980-10-01

The Code of Practice and design principles for portable and transportable radiological protection systems are presented in three parts. Part 1 specifies the requirement for Radiological Protection Instrumentation (RPI) including operational characteristics and the effects of both a radiation and non-radiation environment. Part 2 satisfies the requirement for RPI equipment as regards the overall design, the availability, the reliability, the information display, the human factors, the power supplies, the manufacture and quality assurance, the testing and the cost. Part 3 deals with the supply, location and operation of the RPI equipment. (U.K.)

Using engineering control principles to inform the design of adaptive interventions: a conceptual introduction.

Science.gov (United States)

Rivera, Daniel E; Pew, Michael D; Collins, Linda M

2007-05-01

The goal of this paper is to describe the role that control engineering principles can play in developing and improving the efficacy of adaptive, time-varying interventions. It is demonstrated that adaptive interventions constitute a form of feedback control system in the context of behavioral health. Consequently, drawing from ideas in control engineering has the potential to significantly inform the analysis, design, and implementation of adaptive interventions, leading to improved adherence, better management of limited resources, a reduction of negative effects, and overall more effective interventions. This article illustrates how to express an adaptive intervention in control engineering terms, and how to use this framework in a computer simulation to investigate the anticipated impact of intervention design choices on efficacy. The potential benefits of operationalizing decision rules based on control engineering principles are particularly significant for adaptive interventions that involve multiple components or address co-morbidities, situations that pose significant challenges to conventional clinical practice.

Community-based co-design in Okomakuara

DEFF Research Database (Denmark)

Kapuire, Gereon Koch; Winschiers-Theophilus, Heike; Chivuno-Kuria, Shilumbe

2014-01-01

Although the wider motivation and principles of Participatory Design (PD) are universal its concepts and techniques are highly contextual. Community-based codesign is a variation of PD, where processes are negotiated within the interaction. Thus this workshop gives participants the opportunity...

Usability principles to design mobile workplace learning content

Directory of Open Access Journals (Sweden)

Alessia Messuti

2015-04-01

Full Text Available The article describes the design of a mobile workplace learning tool for trainers of the International Training Centre of the International Labour Organization. The motivation behind is to provide trainers with a practical tool that will enable them to recall information at the moment of need and continue to learn in context. On this purpose a set of visual augmented reality cards was created, taking into consideration the fundamental mobile learning and usability principles. The nature of the article is empirical as it reports an experiment carried out with trainers which aimed at testing cards usability and learnability. Results show that the integration of both online and offline strategies was perceived as an added value as trainers could choose to retrieve information as they mostly like; finally, it also resulted in high usability scores, an aspect that contributes to their effectiveness at the workplace.

Investigations into the design principles in the chemotactic behavior of Escherichia coli.

Science.gov (United States)

Kim, Tae-Hwan; Jung, Sung Hoon; Cho, Kwang-Hyun

2008-01-01

Inspired by the recent studies on the analysis of biased random walk behavior of Escherichia coli[Passino, K.M., 2002. Biomimicry of bacterial foraging for distributed optimization and control. IEEE Control Syst. Mag. 22 (3), 52-67; Passino, K.M., 2005. Biomimicry for Optimization, Control and Automation. Springer-Verlag, pp. 768-798; Liu, Y., Passino, K.M., 2002. Biomimicry of social foraging bacteria for distributed optimization: models, principles, and emergent behaviors. J. Optim. Theory Appl. 115 (3), 603-628], we have developed a model describing the motile behavior of E. coli by specifying some simple rules on the chemotaxis. Based on this model, we have analyzed the role of some key parameters involved in the chemotactic behavior to unravel the underlying design principles. By investigating the target tracking capability of E. coli in a maze through computer simulations, we found that E. coli clusters can be controlled as target trackers in a complex micro-scale-environment. In addition, we have explored the dynamical characteristics of this target tracking mechanism through perturbation of parameters under noisy environments. It turns out that the E. coli chemotaxis mechanism might be designed such that it is sensitive enough to efficiently track the target and also robust enough to overcome environmental noises.

Documenting handicap situations and eliminations through Universal Design patterns

Directory of Open Access Journals (Sweden)

Ann Heylighen

2009-11-01

Full Text Available According to contemporary academic and social insights,human functional limitations and handicaps are not exclusively the result of the physical and / or mental characteristics of the individual (medical model, but theycan just as well be a consequence of a maladjustment of the social and physical environment (conflict / social model.This radical reversal of focus from person to environment,or in other words, from the assessment that the person isimpeded to the insight that the physical and socialenvironment is an impediment, has far-reaching consequences for the designing of human-made environments.The recent Universal Design paradigm extends beyond accommodating ‘modal’ users and aims to include the realdiversity of user populations, including those with physical and / or mental impairments and functional limitations. To achieve this, a large amount of design information in connection with human dis-abilities (limitations andpossibilities is required.Together with prescriptive laws and regulations, designers need descriptive information about; on the one hand,CONFLICTS between users and built environments, and onthe other hand, empirically evident design RESOLUTIONS. In response to this need, the paper advances the development of specific Universal Design Patterns (UD Patterns in order to collect and organise this information for decision makers and for designers.

Principle of minimum distance in space of states as new principle in quantum physics

International Nuclear Information System (INIS)

Ion, D. B.; Ion, M. L. D.

2007-01-01

The mathematician Leonhard Euler (1707-1783) appears to have been a philosophical optimist having written: 'Since the fabric of universe is the most perfect and is the work of the most wise Creator, nothing whatsoever take place in this universe in which some relation of maximum or minimum does not appear. Wherefore, there is absolutely no doubt that every effect in universe can be explained as satisfactory from final causes themselves the aid of the method of Maxima and Minima, as can from the effective causes'. Having in mind this kind of optimism in the papers mentioned in this work we introduced and investigated the possibility to construct a predictive analytic theory of the elementary particle interaction based on the principle of minimum distance in the space of quantum states (PMD-SQS). So, choosing the partial transition amplitudes as the system variational variables and the distance in the space of the quantum states as a measure of the system effectiveness, we obtained the results presented in this paper. These results proved that the principle of minimum distance in space of quantum states (PMD-SQS) can be chosen as variational principle by which we can find the analytic expressions of the partial transition amplitudes. In this paper we present a description of hadron-hadron scattering via principle of minimum distance PMD-SQS when the distance in space of states is minimized with two directional constraints: dσ/dΩ(±1) = fixed. Then by using the available experimental (pion-nucleon and kaon-nucleon) phase shifts we obtained not only consistent experimental tests of the PMD-SQS optimality, but also strong experimental evidences for new principles in hadronic physics such as: Principle of nonextensivity conjugation via the Riesz-Thorin relation (1/2p + 1/2q = 1) and a new Principle of limited uncertainty in nonextensive quantum physics. The strong experimental evidence obtained here for the nonextensive statistical behavior of the [J, �

On the application of motivation theory to human factors/ergonomics: motivational design principles for human-technology interaction.

Science.gov (United States)

Szalma, James L

2014-12-01

Motivation is a driving force in human-technology interaction. This paper represents an effort to (a) describe a theoretical model of motivation in human technology interaction, (b) provide design principles and guidelines based on this theory, and (c) describe a sequence of steps for the. evaluation of motivational factors in human-technology interaction. Motivation theory has been relatively neglected in human factors/ergonomics (HF/E). In both research and practice, the (implicit) assumption has been that the operator is already motivated or that motivation is an organizational concern and beyond the purview of HF/E. However, technology can induce task-related boredom (e.g., automation) that can be stressful and also increase system vulnerability to performance failures. A theoretical model of motivation in human-technology interaction is proposed, based on extension of the self-determination theory of motivation to HF/E. This model provides the basis for both future research and for development of practical recommendations for design. General principles and guidelines for motivational design are described as well as a sequence of steps for the design process. Human motivation is an important concern for HF/E research and practice. Procedures in the design of both simple and complex technologies can, and should, include the evaluation of motivational characteristics of the task, interface, or system. In addition, researchers should investigate these factors in specific human-technology domains. The theory, principles, and guidelines described here can be incorporated into existing techniques for task analysis and for interface and system design.

The Roles and Uses of Design Principles for Developing the Trialogical Approach on Learning

Science.gov (United States)

Paavola, Sami; Lakkala, Minna; Muukkonen, Hanni; Kosonen, Kari; Karlgren, Klas

2011-01-01

In the present paper, the development and use of a specific set of pedagogical design principles in a large research and development project are analysed. The project (the Knowledge Practices Laboratory) developed technology and a pedagogical approach to support certain kinds of collaborative knowledge creation practices related to the…

A New Professional Master in Universal Design in the Built Environment

DEFF Research Database (Denmark)

Ryhl, Camilla; Frandsen, Anne Kathrine

2016-01-01

and rhetoric of universal design in the built environment. As the programme is targeted at people with extensive experience of the field, it is also designed to take the investigations to a higher level than the physical solutions. Studies of e.g. phenomenology, perception theory, disability studies......, organisational and strategic theories, economics and ethics are included. Based on the experience gained by the authors from giving the first class in the Masters programme, the paper presents implications and the potential of expanding the understanding of how universal design may be interpreted within...

Application of Instructional Design Principles in Developing an Online Information Literacy Curriculum.

Science.gov (United States)

Mi, Misa

2016-01-01

An online information literacy curriculum was developed as an intervention to engage students in independent study and self-assessment of their learning needs and learning outcomes, develop proficiency in information skills, and foster lifelong learning. This column demonstrates how instructional design principles were applied to create the learning experiences integrated into various courses of the medical curriculum to promote active learning of information skills and maximize self-directed learning outcomes for lifelong learning.

Ship Design and Construction. An Integrated University Course

DEFF Research Database (Denmark)

Andersen, Poul; Jensen, Jørgen Juncher

1996-01-01

This paper describes an integrated course in design and construction of merchant ships taught at the Department of Naval Architecture andOffshore Engineering, the Technical University of Denmark. During the course, the students make a preliminary design of a ship of selected type and also design...... its engine room. The teaching combines lectures with laboratory work at the drawing tables and computer terminals. During the summer holiday, sea time on board ships of the relevant types are offered. Experienced naval architects from shipyards and ship consultancies give lectures and instructions...

Towards Rational Design of Functional Fluoride and Oxyfluoride Materials from First Principles

Science.gov (United States)

Charles, Nenian

Complex transition metal compounds (TMCs) research has produced functional materials with a range of properties, including ferroelectricity, colossal magnetoresistance, nonlinear optical activity and high-temperature superconductivity. Conventional routes to tune properties in transition metal oxides, for example, have relied primarily on cation chemical substitution and interfacial effects in thin film heterostructures. In heteroanionic TMCs, exhibiting two chemically distinct anions coordinating the same or different cations, engineering of the anion sub-lattice for property control is a promising alternative approach. The presence of multiple anions provides additional design variables, such as anion order, that are absent in homoanionic counterparts. The more complex structural and chemical phase space of heteroanionic materials provides a unique opportunity to realize enhanced or unanticipated electronic, optical, and magnetic responses. Although there is growing interest in heteroanionic materials, and synthetic and characterization advances are occurring for these materials, the crystal-chemistry principles for realizing structural and property control are only slowing emerging. This dissertation employs anion engineering to investigate phenomena in transition metal fluorides and oxyfluorides compounds using first principles density functional theory calculations. Oxyfluorides are particularly intriguing owing their tendency to stabilize highly ordered anion sublattices as well as the potential to combine the advantageous properties of transition metal oxides and fluorides. This work 1) addresses the challenges of studying fluorides and oxyfluorides using first principles calculations; 2) evaluates the feasibility of using external stimuli, such as epitaxial strain and hydrostatic pressure, to control properties of fluorides and oxyfluorides; and 3) formulates a computational workflow based on multiple levels of theory and computation to elucidate structure

Elementary physical approach to Mach's principle and its observational basis

International Nuclear Information System (INIS)

Horak, Z.

1979-01-01

It is shown that Mach's principle and the general principle of relativity are logical consequences of a 'materialistic postulate' and that general relativity implies the validity of Mach's principle for a static (or quasistatic) homogeneous and isotropic universe, spatially self-enclosed. The finite velocity of propagation of gravitational field does not imply a retardation of inertial forces due to the distant masses and therefore does not exclude the validity of Mach's principle. Similarly, the experimentally verified isotropy of inertia is compatible with this principle. The recent observational evidence of very high isotropy of the actual universe proves that the 'anti-Machian' Godel world model must be rejected as a nonphysical one. This suggests the possibility of a renaissance of Einstein's first cosmological model by considering-in the spirit of an older idea of Herbert Dingle-a superlarge-scale quasistatic universe consisting of an unknown number of statistically oscillating regions similar to our own, momentarily expanding, metagalaxy. (author)

University of Texas Safeguards by Design Problem Statement

Energy Technology Data Exchange (ETDEWEB)

Rauch, Eric Benton [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Scherer, Carolynn P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ruggiero, Christy E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2018-01-22

This document describes the problem statement that students at the University of Texas will use for their senior level capstone design class. The purpose of this project is to introduce students to Safeguards by Design concepts as part of their capstone design course at the culmination of their degree program. This work is supported by Los Alamos National Laboratory with FY17 and FY18 programmatic funding from the U. S. Department of Energy’s (DOE) National Nuclear Security Administration (NNSA), through the Office of Defense Nuclear Nonproliferation (DNN), Office of International Nuclear Safeguards (INS), Next Generation Safeguards Initiative (NGSI), Human Resource Development Program, Safeguards by Design Project.

Design and Development of a University E-Library System in Turkey: A Case from Dicle University

Directory of Open Access Journals (Sweden)

Murat YALMAN

2014-08-01

Full Text Available Services provided for students in traditional libraries at universities have been renovated in line with the development of technology. Therefore, today libraries are not evaluated with their sizes of places but with the variety and abundance of sources found in libraries. In terms of current educational activities, it is fairly important for universities to structure and renovate their libraries. The reason is that learning is now independent of place and time. The spread of the Internet and of Internet technologies and the increase in the number of Internet users make e-library obligatory and unavoidable. Therefore, universities should internalize the concept of e-library and take electronic library into consideration while restructuring their library services. The present study tried to determine how to carry out an e-library design in accordance with the library services of universities. In this process, the overall purpose was to determine the needs by examining the user interface of the webpage designed, its interface features, its differences, ease of its use, its clarity for users to understand and the pros and cons of the system. In this way, universities using e-library are believed to provide their students with better services by increasing their quality of education.

Semiclassical universe from first principles

International Nuclear Information System (INIS)

Ambjorn, J.; Jurkiewicz, J.; Loll, R.

2005-01-01

Causal dynamical triangulations in four dimensions provide a background-independent definition of the sum over space-time geometries in non-perturbative quantum gravity. We show that the macroscopic four-dimensional world which emerges in the Euclidean sector of this theory is a bounce which satisfies a semiclassical equation. After integrating out all degrees of freedom except for a global scale factor, we obtain the ground state wave function of the universe as a function of this scale factor

IFE Power Plant design principles. Drivers. Solid state laser drivers

International Nuclear Information System (INIS)

Nakai, S.; Andre, M.; Krupke, W.F.; Mak, A.A.; Soures, J.M.; Yamanaka, M.

1995-01-01

The present status of solid state laser drivers for an inertial confinement thermonuclear fusion power plant is discussed. In particular, the feasibility of laser diode pumped solid state laser drivers from both the technical and economic points of view is briefly reviewed. Conceptual design studies showed that they can, in principle, satisfy the design requirements. However, development of new solid state materials with long fluorescence lifetimes and good thermal characteristics is a key issue for laser diode pumped solid state lasers. With the advent of laser diode pumping many materials which were abandoned in the past can presently be reconsidered as viable candidates. It is also concluded that it is important to examine the technical requirements for solid state lasers in relation to target performance criteria. The progress of laser diode pumped lasers in industrial applications should also be closely watched to provide additional information on the economic feasibility of this type of driver. 15 refs, 9 figs, 2 tabs

Formulation of engineering design principles for the treatment of irradiated fuel and associated radioactive waste

International Nuclear Information System (INIS)

Banford, A.W.; Hanson, B.C.; Scully, P.J.; Taylor, R.

2007-01-01

The industrial scale treatment of irradiated fuel in the UK has resulted in BNFL developing extensive experience of the process design, build, commissioning, and operation necessary for successful nuclear processing plant. Much of the design experience now resides in Nexia Solutions (formally BNFL Research and Development Division) who have always defined and undertaken the extensive development programmes necessary to underpin the design at all stages of the project life-cycle. Since the 1990's, Nexia Solutions has built up a large portfolio of plant designs for a range of spent fuel applications, from fuel conditioning to partitioning and transmutation. In addition, by investigation of a large and diverse portfolio of technologies Nexia Solutions has developed innovative concepts for plant design that could present significant economic savings on conventional approaches. Using this experience and the lessons learned, we have developed and refined our own engineering design principles necessary for the successful design of commercial spent fuel and waste treatment plant. Our approach is to advocate an integral concept, with both science and engineering designs working in parallel during development. 4 foundation principles for success have been identified: -) understand the strategic objective, -) adopt a risk driven programme, -) engage in engineering activities early, and -) timely application of appropriate engineering methodologies. 2 Case studies presented in this paper: first, the BNFL segregated effluent treatment plant and secondly, the selection of a pyrochemical process for recycle of fast reactor, demonstrate how this approach has been adopted and the benefits that have been gained

Designing nanomaterials to maximize performance and minimize undesirable implications guided by the Principles of Green Chemistry.

Science.gov (United States)

Gilbertson, Leanne M; Zimmerman, Julie B; Plata, Desiree L; Hutchison, James E; Anastas, Paul T

2015-08-21

The Twelve Principles of Green Chemistry were first published in 1998 and provide a framework that has been adopted not only by chemists, but also by design practitioners and decision-makers (e.g., materials scientists and regulators). The development of the Principles was initially motivated by the need to address decades of unintended environmental pollution and human health impacts from the production and use of hazardous chemicals. Yet, for over a decade now, the Principles have been applied to the synthesis and production of engineered nanomaterials (ENMs) and the products they enable. While the combined efforts of the global scientific community have led to promising advances in the field of nanotechnology, there remain significant research gaps and the opportunity to leverage the potential global economic, societal and environmental benefits of ENMs safely and sustainably. As such, this tutorial review benchmarks the successes to date and identifies critical research gaps to be considered as future opportunities for the community to address. A sustainable material design framework is proposed that emphasizes the importance of establishing structure-property-function (SPF) and structure-property-hazard (SPH) relationships to guide the rational design of ENMs. The goal is to achieve or exceed the functional performance of current materials and the technologies they enable, while minimizing inherent hazard to avoid risk to human health and the environment at all stages of the life cycle.

Field Research in Political Science Practices and Principles

DEFF Research Database (Denmark)

Gravier, Magali

2017-01-01

Book review of: Kapiszewski (Diana), Maclean (Lauren M.), Read (Benjamin L.) ­ Field Research in Political Science. Practices and Principles. ­ Cambridge, Cambridge University Press, 2015 (Strategies for Social Inquiry). XIV + 456 p. Figures. Annexe. Bibliogr. Index.......Book review of: Kapiszewski (Diana), Maclean (Lauren M.), Read (Benjamin L.) ­ Field Research in Political Science. Practices and Principles. ­ Cambridge, Cambridge University Press, 2015 (Strategies for Social Inquiry). XIV + 456 p. Figures. Annexe. Bibliogr. Index....

E-learning course design in teacher design teams. Experiences in the Open University of Tanzania

NARCIS (Netherlands)

Nihuka, Kassimu A.; Voogt, Joke

2009-01-01

Collaborative course design in teacher design teams (TDTs) has proved to be a promising professional development arrangement. This study explored the potential of TDTs in orienting teachers on course redesign for e-learning delivery at the context of Open University of Tanzania (OUT). Three teachers

Design Principles for Covalent Organic Frameworks as Efficient Electrocatalysts in Clean Energy Conversion and Green Oxidizer Production.

Science.gov (United States)

Lin, Chun-Yu; Zhang, Lipeng; Zhao, Zhenghang; Xia, Zhenhai

2017-05-01

Covalent organic frameworks (COFs), an emerging class of framework materials linked by covalent bonds, hold potential for various applications such as efficient electrocatalysts, photovoltaics, and sensors. To rationally design COF-based electrocatalysts for oxygen reduction and evolution reactions in fuel cells and metal-air batteries, activity descriptors, derived from orbital energy and bonding structures, are identified with the first-principle calculations for the COFs, which correlate COF structures with their catalytic activities. The calculations also predict that alkaline-earth metal-porphyrin COFs could catalyze the direct production of H 2 O 2 , a green oxidizer and an energy carrier. These predictions are supported by experimental data, and the design principles derived from the descriptors provide an approach for rational design of new electrocatalysts for both clean energy conversion and green oxidizer production. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

38 CFR 3.303 - Principles relating to service connection.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Principles relating to... Evaluations; Service Connection § 3.303 Principles relating to service connection. (a) General. Service... are medical principles so universally recognized as to constitute fact (clear and unmistakable proof...

Anthropic principle in biology and radiation biology

International Nuclear Information System (INIS)

Akif'ev, A. P.; Degtyarev, S.V.

1999-01-01

It was suggested to add the anthropic principle of the Universe according to which the physical constants of fundamental particles of matter and the laws of their counteraction are those that an appearance of man and mind becomes possible and necessary, with some biological constants to the set of fundamental constants. With reparation of DNA as an example it was shown how a cell ran some parameters of Watson-Crick double helix. It was pointed that the concept of the anthropic principle of the Universe in its full body including biological constants was a key to developing of a unified theory of evolution of the Universe within the limits of scientific creationism [ru

Towards Synergistic Electrode-Electrolyte Design Principles for Nonaqueous Li-O[Formula: see text] batteries.

Science.gov (United States)

Khetan, Abhishek; Krishnamurthy, Dilip; Viswanathan, Venkatasubramanian

2018-03-20

One route toward sustainable land and aerial transportation is based on electrified vehicles. To enable electrification in transportation, there is a need for high-energy-density batteries, and this has led to an enormous interest in lithium-oxygen batteries. Several critical challenges remain with respect to realizing a practical lithium-oxygen battery. In this article, we present a detailed overview of theoretical efforts to formulate design principles for identifying stable electrolytes and electrodes with the desired functionality and stability. We discuss design principles relating to electrolytes and the additional stability challenges that arise at the cathode-electrolyte interface. Based on a thermodynamic analysis, we discuss two important requirements for the cathode: the ability to nucleate the desired discharge product, Li[Formula: see text]O[Formula: see text], and the ability to selectively activate only this discharge product while suppressing lithium oxide, the undesired secondary discharge product. We propose preliminary guidelines for determining the chemical stability of the electrode and illustrate the challenge associated with electrode selection using the examples of carbon cathodes and transition metals. We believe that a synergistic design framework for identifying electrolyte-electrode formulations is needed to realize a practical Li-O[Formula: see text] battery.

Analysis and Controller Design of a Universal Bidirectional DC-DC Converter

Directory of Open Access Journals (Sweden)

Kou-Bin Liu

2016-06-01

Full Text Available In this paper, first the operating principles of a non-isolated universal bidirectional DC-DC converter are studied and analyzed. The presented power converter is capable of operating in all power transferring directions in buck/boost modes. Zero voltage switching can be achieved for all the power switches through proper modulation strategy design, therefore, the presented converter can achieve high efficiency. To further improve the efficiency, the relationship between the phase-shift angle and the overall system efficiency is analyzed in detail, an adaptive phase-shift (APS control method which determines the phase-shift value between gating signals according to the load level is then proposed. As the modulation strategy is a software-based solution, there is no requirement for additional circuits, therefore, it can be implemented easily and instability and noise susceptibility problems can be reduced. To validate the correctness and the effectiveness of the proposed method, a 300 W prototyping circuit is implemented and tested. A low cost dsPIC33FJ16GS502 digital signal controller is adopted in this paper to realize the power flow control, DC-bus voltage regulation and APS control. According to the experimental results, a 12.2% efficiency improvement at light load and 4.0% efficiency improvement at half load can be achieved.

Opportunity recognition in entrepreneurship education, design principles on fostering competent entrepreneurs in the science domain

NARCIS (Netherlands)

Nab, J.; Beugels, J.; van Keulen, H.; Oost, H.; Pilot, A.

2008-01-01

This paper is part of a research project focusing on educational design principles that should help students with a background in Science to become competent with respect to opportunity recognition in business. The recognition of business opportunities is one of the basic competencies of

A simplified approach to design for assembly

DEFF Research Database (Denmark)

Moultrie, James; Maier, Anja

2014-01-01

The basic principles of design for assembly (DfA) are well established. This paper presents a short review of the development of DfA approaches before presenting a new tool in which these principles are packaged for use in teams, both in an industrial and an educational context. The fundamental...... consideration in the design of this tool is to encourage wide team participation from across an organisation and is thus physical rather than software-based. This tool builds on the process developed by Appleton whilst at the University of Cambridge. In addition to the traditional analysis of component fitting...

Design principles and requirements for the ICT of future smart energy systems; Designprinzipien und Anforderungen an die IKT fuer intelligente Energiesysteme der Zukunft

Energy Technology Data Exchange (ETDEWEB)

Eger, Kolja [Siemens AG, Muenchen (Germany). Corporate Technology; Mohr, Werner [Nokia Siemens Networks Management International GmbH, Muenchen (Germany)

2012-07-01

The information and communication technology (ICT) is a key enabling technology for Smart Grids. With respect to very short innovation cycles for ICT compared to longer innovation cycles for the transition of the energy system there is a huge challenge to develop and exploit the potential of future ICT and their application in a future intelligent energy system. Different ICT technologies, such as Internet of Things or Cloud Computing are intensively being discussed. They can be summarized under the term ''Future Internet''. The EU project FINSENY is investigating the potential of Future Internet concepts and technologies in particular for Smart Energy systems. A series of design principles and the necessary ICT are developed, which are described in this paper. These design principles such as open interfaces, security-by-design, simplicity, maintenance, auto-configuration and modularity are of general nature. They will remain despite technology developments. Furthermore, several design principles are not only applicable to ICT but they are also related to design principles of intelligent energy systems like decentralized energy generation systems. (orig.)

Seismic design principles for the German fast breeder reactor SNR 2

International Nuclear Information System (INIS)

Busch, K.A.; Peters, K.A.; Rosenhauer, W.

1987-01-01

The safety issue of an adequate and optimized external event protection is of course that unnecessary hardware precautions might promote internal disturbances or hamper their control. It has up to now not satisfactorily been realized that the only serious context for seismic impacts on a fast reactor is their attributed potential of overriding core disruptive accident prevention, see e.g. GRS 1982. General and exaggerated antiseismic design features not focussed upon this point may as well turn out to be non-negligible initators in the absence of seismic vibrations. Unexpected snubber difficulties requiring additional reactor scrams and decay heat removal phases may be named as a simple example. The presented seismic design principles reflect the progress made in the concerned fields of analysis and do serve on the other hand as guidelines for research and development efforts under work. (orig./GL)

Urban Space Innovation - “10+” Principles through Designing the New Image of the Existing Shopping Mall in Csepel, Hungary

Science.gov (United States)

Gyergyak, Janos

2017-10-01

The first part of the paper is about to introduce the principles of “placemaking” as an innovation and important tool of the cities in the 21st century. The process helps designers to transform the spaces of “nobody” to a community-based space for supporting the connection among humans. The second part of the paper shows the process of the used principles by the author for designing the new image of the existing shopping mall in Csepel, Hungary. This work was selected as one of the best design ideas for renewing the existing underutilized space.

Lorentz Transformation from Symmetry of Reference Principle

International Nuclear Information System (INIS)

Petre, M.; Dima, M.; Dima, A.; Petre, C.; Precup, I.

2010-01-01

The Lorentz Transformation is traditionally derived requiring the Principle of Relativity and light-speed universality. While the latter can be relaxed, the Principle of Relativity is seen as core to the transformation. The present letter relaxes both statements to the weaker, Symmetry of Reference Principle. Thus the resulting Lorentz transformation and its consequences (time dilatation, length contraction) are, in turn, effects of how we manage space and time.

Peer assessment in university teaching: Evaluating seven course designs

OpenAIRE

van den Berg, I.; Admiraal, W.; Pilot, A.

2006-01-01

Peer assessment in university teaching: evaluating seven course designs Abstract Peer assessment is understood to be an arrangement with students assessing the quality of their fellow students’ writings and giving feedback to each other. This multiple-case study of seven designs of peer assessment focuses on the contribution of peer assessment to the acquisition of undergraduates’ writing skills. Its aim is to arrive at an optimal design of peer assessment. Factors included in this study are:...

Framing the Universal Design of Information and Communication Technology: An Interdisciplinary Model for Research and Practice.

Science.gov (United States)

Giannoumis, G Anthony

2016-01-01

Research has yet to provide an interdisciplinary framework for examining ICT accessibility as it relates to Universal Design. This article assesses the conceptualizations and interdisciplinarity of ICT accessibility and Universal Design research. This article uses a grounded theory approach to pose a multilevel framework for Universal Design. The macro level, consists of scholarship that examines the context of Universal Design, and is typified by legal and sociological studies that investigate social norms and environments. The meso level, which consists of scholarship that examines activity in Universal Design as an approach to removing barriers for use and participation. The meso level is typified by studies of computer science and engineering that investigate the use of technology as a mechanism of participation. The micro level consists of scholarship that examines individuals and groups in Universal Design as an approach to understanding human characteristics. The micro level is typified by studies of human factors and psychology. This article argues that the multilevel framework for Universal Design may help remove the artificial separation between disciplines concerned with ICT accessibility and promote more fruitful research and development.

Developing digital technologies for university mathematics by applying participatory design methods

DEFF Research Database (Denmark)

Triantafyllou, Eva; Timcenko, Olga

2013-01-01

This paper presents our research efforts to develop digital technologies for undergraduate university mathematics. We employ participatory design methods in order to involve teachers and students in the design of such technologies. The results of the first round of our design are included...

From First Principles Design to Realization of Bimetallic Catalysts for Enhanced Selectivity

Energy Technology Data Exchange (ETDEWEB)

Lobo, Raul F.; Crooks, Richard M.; Mavrikakis, Manos

2014-04-08

“Catalysis by design” has been a dream for decades. To specify the composition and structure of matter to effect a desired catalytic transformation with desired and predicted rate and selectivity remains a monumental challenge, especially in heterogeneous catalysis. Our research thrusts have been chosen not only for their practical and scientific relevance, e.g. for more efficient and sustainable chemicals and fuels production, but also because they provide a foundation for developing and exploring broadly applicable principles and strategies for catalyst design.

Compression as a Universal Principle of Animal Behavior

Science.gov (United States)

Ferrer-i-Cancho, Ramon; Hernández-Fernández, Antoni; Lusseau, David; Agoramoorthy, Govindasamy; Hsu, Minna J.; Semple, Stuart

2013-01-01

A key aim in biology and psychology is to identify fundamental principles underpinning the behavior of animals, including humans. Analyses of human language and the behavior of a range of non-human animal species have provided evidence for a common pattern underlying diverse behavioral phenomena: Words follow Zipf's law of brevity (the…

Universal elements of fragmentation

International Nuclear Information System (INIS)

Yanovsky, V. V.; Tur, A. V.; Kuklina, O. V.

2010-01-01

A fragmentation theory is proposed that explains the universal asymptotic behavior of the fragment-size distribution in the large-size range, based on simple physical principles. The basic principles of the theory are the total mass conservation in a fragmentation process and a balance condition for the energy expended in increasing the surface of fragments during their breakup. A flux-based approach is used that makes it possible to supplement the basic principles and develop a minimal theory of fragmentation. Such a supplementary principle is that of decreasing fragment-volume flux with increasing energy expended in fragmentation. It is shown that the behavior of the decreasing flux is directly related to the form of a power-law fragment-size distribution. The minimal theory is used to find universal asymptotic fragment-size distributions and to develop a natural physical classification of fragmentation models. A more general, nonlinear theory of strong fragmentation is also developed. It is demonstrated that solutions to a nonlinear kinetic equation consistent with both basic principles approach a universal asymptotic size distribution. Agreement between the predicted asymptotic fragment-size distributions and experimental observations is discussed.

Learning to Be: The Modelling of Art and Design Practice in University Art and Design Teaching

Science.gov (United States)

Budge, Kylie

2016-01-01

Learning to be an artist or designer is a complex process of becoming. Much of the early phase of "learning to be" occurs during the time emerging artists and designers are students in university art/design programmes, both undergraduate and postgraduate. Recent research reveals that a critical role in assisting students in their…

Designing an Interactive OER Course Development at Athabasca University Based on ODL Principles

Science.gov (United States)

Yan, Hongxin; Law, Sandra

2013-01-01

Failure rates in first year calculus courses are high in most post-secondary institutions across North America and other parts of the world. This Inukshuk-funded open education project involved the development of five stand-alone pre-calculus learning modules. The design and revision phases of this project occurred between the fall of 2007 and…

Cosmological equivalence principle and the weak-field limit

International Nuclear Information System (INIS)

Wiltshire, David L.

2008-01-01

The strong equivalence principle is extended in application to averaged dynamical fields in cosmology to include the role of the average density in the determination of inertial frames. The resulting cosmological equivalence principle is applied to the problem of synchronization of clocks in the observed universe. Once density perturbations grow to give density contrasts of order 1 on scales of tens of megaparsecs, the integrated deceleration of the local background regions of voids relative to galaxies must be accounted for in the relative synchronization of clocks of ideal observers who measure an isotropic cosmic microwave background. The relative deceleration of the background can be expected to represent a scale in which weak-field Newtonian dynamics should be modified to account for dynamical gradients in the Ricci scalar curvature of space. This acceleration scale is estimated using the best-fit nonlinear bubble model of the universe with backreaction. At redshifts z -10 ms -2 , is small, when integrated over the lifetime of the universe it amounts to an accumulated relative difference of 38% in the rate of average clocks in galaxies as compared to volume-average clocks in the emptiness of voids. A number of foundational aspects of the cosmological equivalence principle are also discussed, including its relation to Mach's principle, the Weyl curvature hypothesis, and the initial conditions of the universe.

The AU Model Law on Universal Jurisdiction: An African Response to Western Prosecutions based on the Universality Principle

Directory of Open Access Journals (Sweden)

Angelo Dube

2015-12-01

Full Text Available The African continent has been consistent in placing its concerns regarding the manner in which international criminal justice is administered on the international platform. For the past decade, the continent has minced no words about its misgivings concerning the use of universal jurisdiction (UJ by both foreign States and the International Criminal Court (ICC. The African Union (AU has been very supportive of UJ and its utility in fighting impunity and affording justice to victims of the core crimes of international law, namely, genocide, war crimes and crimes against humanity. Often referred to as core crimes, these are regarded as customary law crimes which are an affront to entire humankind. These crimes were also codified by the Rome Statute of the ICC. However, the political and selective use of the principle of universality by foreign States to prosecute perpetrators of these crimes was seen as causing conflicts and undermining peace efforts, reconciliation and regional stability. As a result the African continent voiced its concerns at various public platforms, including under the auspices of the UN and it therefore called for reforms. This prompted the AU to produce its own model law on UJ, which African States could adapt to their own socio-political circumstances and legal context. The debates that ensued around UJ on the African continent offered African States a chance to contribute to the development of international law, especially on the rules concerning UJ. This paper analyses the interaction amongst African states that eventually led to the development of UJ regulations within their individual legal systems, and tries to determine if there is indeed an African signature in those legal rules.

Book Review. Inger Marie Lid: Universal design. Core values​​, knowledge, and practices

Directory of Open Access Journals (Sweden)

Sigmund Asmervik

2013-12-01

Full Text Available Sigmund Asmervik, dr.ing. Professor emeritus, Norwegian University of Life Sciences (UMB, has reviewed Inger Marie Lid’s book Universell utforming: Verdigrunnlag, kunnskap og praksis (Universal design: Core values​​, knowledge, and practices. He states that this book provides very good suggestions about topics relating to issues such as how people should be able to develop in the community with others and how to look after issues relating to dignity and bodily vulnerability. This expands and challenges the discourse around the concept of universal design, and is the book's most important contribution. As a textbook aimed at students of architecture and engineering, occupational therapy and physiotherapy studies, and otherwise to anyone who is engaged in universal design in practice, as it says on the publisher's website, it has some significant challenges.

Fusion research principles

CERN Document Server

Dolan, Thomas James

2013-01-01

Fusion Research, Volume I: Principles provides a general description of the methods and problems of fusion research. The book contains three main parts: Principles, Experiments, and Technology. The Principles part describes the conditions necessary for a fusion reaction, as well as the fundamentals of plasma confinement, heating, and diagnostics. The Experiments part details about forty plasma confinement schemes and experiments. The last part explores various engineering problems associated with reactor design, vacuum and magnet systems, materials, plasma purity, fueling, blankets, neutronics

Designing and Implication of Pictograms in Universities of Tehran (IRAN

Directory of Open Access Journals (Sweden)

Keshavarzi Firouzeh

2017-01-01

Full Text Available Pictograms have many implications nowadays and are used for simple and fluent pictorial interpretations. These concepts are usually informative, conductive and warning. These kinds of icons are used in order to simplify the communication in an environment as are used in airports, terminals, railroad stations, parks, zoo, hospitals, drug stores and so on. To provide an efficient contrast, pictograms are often in black and white. Nowadays in different public places and landscape design pictograms are used for perfect communication. By the ways these icons are related to the civilization and tribal culture. Designing pictograms need a permanent search for better plan for better information transfer. In this project researcher designed and executed pictograms for better conduction in some selected Universities in Iran at 2015. The project was done for internal and external places of selected universities. Absence of informative and pictorial icons in universities environments causes wandering about for novices and they are not able to find different places like libraries, restaurant, and offices and so on. This study resulted in better communication in campus environments. Researcher hope pictograms will find their real and proper role in Iranian art area.

Database principles programming performance

CERN Document Server

O'Neil, Patrick

2014-01-01

Database: Principles Programming Performance provides an introduction to the fundamental principles of database systems. This book focuses on database programming and the relationships between principles, programming, and performance.Organized into 10 chapters, this book begins with an overview of database design principles and presents a comprehensive introduction to the concepts used by a DBA. This text then provides grounding in many abstract concepts of the relational model. Other chapters introduce SQL, describing its capabilities and covering the statements and functions of the programmi

Designing and Managing a Strategic Academic Alliance: An Australian University Experience

Science.gov (United States)

Ryan, Lindsay; Morriss, Ross

2005-01-01

Purpose--This article outlines the experience and approach of an Australian university in developing and managing education program partnerships within industry. Design/methodology/approach--Describes how the university has established a specialist Strategic Partnerships unit for managing the customisation and delivery of postgraduate award…

Sustainability for the Americas Initiative: Land Design Institute, Ball State University

Science.gov (United States)

J. L. Motloch; Pedro Pacheco; Eloy F. Jr. Casagrande

2006-01-01

The Ball State University Land Design Institute (LDI) pursues ecologically and culturally sustainable land design through education, research, outreach, and demonstration. LDI seeks to lead communities (local, regional, global) to sustainable futures. It connects communities and sustainability experts to optimize education about land management, planning, and design...

Advanced engineering design program at the University of Illinois for the 1987-1988 academic year

Science.gov (United States)

Sivier, Kenneth R.; Lembeck, Michael F.

1988-01-01

The participation of the University of Illinois at Urbana-Champaign in the NASA/USRA Universities Advanced Engineering Design Program (Space) is reviewed for the 1987 to 88 academic year. The University's design project was the Manned Marsplane and Delivery System. In the spring of 1988 semester, 107 students were enrolled in the Aeronautical and Astronautical Engineering Departments' undergraduate Aerospace Vehicle Design course. These students were divided into an aircraft section (responsible for the Marsplane design), and a spacecraft section (responsible for the Delivery System Design). The design results are presented in Final Design Reports, copies of which are attached. In addition, five students presented a summary of the design results at the Program's Summer Conference.

PRINCIPLE "EARLY MATCHING" AERODYNAMIC DESIGN AIRCRAFT WITH LANDING GEAR HOVERCRAFT

Directory of Open Access Journals (Sweden)

V. P. Morozov

2015-01-01

Full Text Available The principle of "early matching" aircraft aerohydrodynamic layouts with air cushion landing gear is suggested. Application of this principle is considered as an example of adaptation to the ball screw base circuit of light transport aircraft. The principle, other than weight, aerodynamic, technological and operational requirements includes additional project activities related to the installation of ball screws.

A game plan: Gamification design principles in mHealth applications for chronic disease management.

Science.gov (United States)

Miller, Aaron S; Cafazzo, Joseph A; Seto, Emily

2016-06-01

Effective chronic disease management is essential to improve positive health outcomes, and incentive strategies are useful in promoting self-care with longevity. Gamification, applied with mHealth (mobile health) applications, has the potential to better facilitate patient self-management. This review article addresses a knowledge gap around the effective use of gamification design principles, or mechanics, in developing mHealth applications. Badges, leaderboards, points and levels, challenges and quests, social engagement loops, and onboarding are mechanics that comprise gamification. These mechanics are defined and explained from a design and development perspective. Health and fitness applications with gamification mechanics include: bant which uses points, levels, and social engagement, mySugr which uses challenges and quests, RunKeeper which uses leaderboards as well as social engagement loops and onboarding, Fitocracy which uses badges, and Mango Health, which uses points and levels. Specific design considerations are explored, an example of the efficacy of a gamified mHealth implementation in facilitating improved self-management is provided, limitations to this work are discussed, a link between the principles of gaming and gamification in health and wellness technologies is provided, and suggestions for future work are made. We conclude that gamification could be leveraged in developing applications with the potential to better facilitate self-management in persons with chronic conditions. © The Author(s) 2014.

Reconsidering the Technologies of Intellectual Inquiry in Curriculum Design

Science.gov (United States)

Costa, Cristina; Harris, Lisa

2017-01-01

This paper reports on the design and delivery of classroom pedagogies and students' engagement with it in two different UK universities. Under the banner of curriculum design and Bourdieu's curriculum principles, the study set out to create modules that provided students with an interdisciplinary perspective on how the web is changing the way…

The application of pragmatic principles in competitive business writing

Directory of Open Access Journals (Sweden)

Wu Haihong

2016-01-01

Full Text Available Business English writing, as an important means of communication, plays a vital role in international business communication. And pragmatic principle, as the universal principle, exists in all communication situations. This paper gives a brief introduction to the pragmatic principles and business English writing principles and illustrates the high consistency between these principles. By analyzing samples, it also points out the instructive significance of pragmatic principles in competitive business English writing. To a certain extent, this provides a theoretical support for the research of business English writing.

The pit ventilation features and the design principle of ventilation system in trackless mining uranium mine

International Nuclear Information System (INIS)

Deng Wenhui; Zhou Xinghuo; Li Xianjie

2001-01-01

According to the pit arrangement features of trackless mining uranium mine, based on the fundamental of radon permeation and control, and analysis of radon pollution characteristics and radon education, the design principle of ventilation system in trackless mining uranium mine has been raised

Design Principles for the Atomic and Electronic Structure of Halide Perovskite Photovoltaic Materials: Insights from Computation.

Science.gov (United States)

Berger, Robert F

2018-02-09

In the current decade, perovskite solar cell research has emerged as a remarkably active, promising, and rapidly developing field. Alongside breakthroughs in synthesis and device engineering, halide perovskite photovoltaic materials have been the subject of predictive and explanatory computational work. In this Minireview, we focus on a subset of this computation: density functional theory (DFT)-based work highlighting the ways in which the electronic structure and band gap of this class of materials can be tuned via changes in atomic structure. We distill this body of computational literature into a set of underlying design principles for the band gap engineering of these materials, and rationalize these principles from the viewpoint of band-edge orbital character. We hope that this perspective provides guidance and insight toward the rational design and continued improvement of perovskite photovoltaics. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Design and Realization of Universal Data Interface

Directory of Open Access Journals (Sweden)

Jong-Woo Kim

2005-03-01

Full Text Available KARI studied data interface of Space Applications for developing Space Experimental Instrument in International Space Station, designed, and manufactured the UDIS (International Sapce Station Universal Data Interface simulator according to requirements of the data interface. This paper explains the design and implementation of UDIS for space application. UDIS is the instrument which simulate to interface the data from ISS to experiment module, payload and habitation module and use the development of a experiment system in the space. This simulator will be used to the GSE (Ground Support Equipment for test of experiment system. By realization of the simulator, we ensure data interface skills for a manned-space data communication system.

Balancing the principles: why the universality of human rights is not the Trojan horse of moral imperialism.

Science.gov (United States)

Semplici, Stefano

2013-11-01

The new dilemmas and responsibilities which arise in bioethics both because of the unprecedented pace of scientific development and of growing moral pluralism are more and more difficult to grapple with. At the 'global' level, the call for the universal nature at least of some fundamental moral values and principles is often being contended as a testament of arrogance, if not directly as a new kind of subtler imperialism. The human rights framework itself, which provided the basis for the most relevant international declarations and documents, is not exempt from the charge. However, the refusal of a top-down conception of the universal as a sort of product for exportation should not be confused with a relativistic landscape, where all the cows can be indifferently black or white. This contribution aims at outlining an approach, which reconciles universalism as enshrined in founding human rights declarations with respect for cultural diversity. In order to do so, two conceptual frameworks are discussed: the 'tool-kit' model and the morals/ethics difference. The example of the right to quality health care confirms the argument that striking a balance between cherishing pluralism and defending some fundamental rights and obligations does not amount to an assertion of moral imperialism.

A Comparison of Principles of Economics Curriculum across U.S. Colleges and Universities

Science.gov (United States)

Prante, Gerald

2016-01-01

This paper compares principles of economics curriculum in 2015-16 academic catalogues among the Princeton Review's "The Best 380 Colleges 2016 Edition." The paper finds that 76 percent of schools on the list offer separate principles courses for microeconomics and macroeconomics, while 25 percent offer a single principles course covering…

Designing a 'neotissue' using the principles of biology, chemistry and engineering.

Science.gov (United States)

Nannaparaju, Madhusudhan; Oragui, Emeka; Khan, Wasim S

2012-01-01

The traditional methods of treating musculoskeletal injuries and disorders are not completely effective and have several limitations. Tissue engineering involves using the principles of biology, chemistry and engineering to design a 'neotissue' that augments a malfunctioning in vivo tissue. The main requirements for functional engineered tissue include reparative cellular components that proliferate on a scaffold grown within a bioreactor that provides specific biochemical and physical signals to regulate cell differentiation and tissue assembly. In this review we provide an overview of the biology of common musculoskeletal tissue and discuss their common pathologies. We also describe the commonly used stem cells, scaffolds and bioreactors and evaluate their role in issue engineering.

Equivalence Principle, Higgs Boson and Cosmology

Directory of Open Access Journals (Sweden)

Mauro Francaviglia

2013-05-01

Full Text Available We discuss here possible tests for Palatini f(R-theories together with their implications for different formulations of the Equivalence Principle. We shall show that Palatini f(R-theories obey the Weak Equivalence Principle and violate the Strong Equivalence Principle. The violations of the Strong Equivalence Principle vanish in vacuum (and purely electromagnetic solutions as well as on short time scales with respect to the age of the universe. However, we suggest that a framework based on Palatini f(R-theories is more general than standard General Relativity (GR and it sheds light on the interpretation of data and results in a way which is more model independent than standard GR itself.

Exercising older people´s brains in Costa Rica: Design principles for using information and communication technologies for cognitive activity and social interaction

DEFF Research Database (Denmark)

Castro Rojas, Maria Dolores; Bygholm, Ann; Hansen, Tia Gitte Bondesen

2018-01-01

This study is part of a design-based research project aimed at designing a learning intervention for enabling Costa Rican older people to use information and communication technologies for cognitive activity and social interaction. Data from relevant literature, a focus group with older adults......-sensitive design principles that include wider topics that influence the learning process, such as emotions and stereotypes related to learning about and using information and communication technologies, as well as the social support to that learning. The resulting eight design principles argue for respectful...

Integrated Research/Education University Aircraft Design Program Development

Science.gov (United States)

2017-04-06

of the art ; Substantial engineering analysis using industry-standard simulation techniques and tools; Substantial testing and analysis / test...flight vehicle configurations that would be a contribution to the state of the art in airplane design. DISTRIBUTION A: Distribution approved for public...Dr. Eli Livne Boeing Endowed Professor of Aeronautics & Astronautics Adjunct Professor, Department of Mechanical Engineering University of

Normative foundations of technology transfer and transnational benefit principles in the UNESCO Universal Declaration on Bioethics and Human Rights.

Science.gov (United States)

Faunce, Thomas Alured; Nasu, Hitoshi

2009-06-01

The United Nations Scientific, Education, and Cultural Organization Universal Declaration on Bioethics and Human Rights (UDBHR) expresses in its title and substance a controversial linkage of two normative systems: international human rights law and bioethics. The UDBHR has the status of what is known as a "nonbinding" declaration under public international law. The UDBHR's foundation within bioethics (and association, e.g., with virtue-based or principlist bioethical theories) is more problematic. Nonetheless, the UDBHR contains socially important principles of technology transfer and transnational benefit (articles 14, 15, and 21). This paper is one of the first to explore how the disciplines of bioethics and international human rights law may interact in the UDBHR to advance the policy relevance and health impact of such principles. It investigates their normative ancestry in the UDBHR, as well as relevant conceptual differences between bioethics and public international law in this respect, and how these may be relevant to their conceptual evolution and application.

Investigating Underlying Principles to Guide Health Impact Assessment

Directory of Open Access Journals (Sweden)

Ali Fakhri

2014-06-01

Full Text Available Background Many countries conduct Health Impact Assessment (HIA of their projects and policies to predict their positive and negative health impacts. In recent years many guides have been developed to inform HIA practice, largely reflecting local developments in HIA. These guides have often been designed for specific contexts and specific need, making the choice between guides difficult. The objective of the current study is to identify underlying principles in order to guide HIA practice in Iran. Methods This study was conducted in three stages: 1 Studies comparing HIA guidelines were reviewed to identify criteria used for comparison seeking emphasized principles. 2 The HIA characteristics extracted from published papers were categorized in order to determine the principles that could guide HIA practice. 3 Finally, these principles were agreed by experts using nominal group technique. Results The review of the studies comparing HIA guides demonstrated there are no clear comparison criteria for reviewing HIA guides and no study mentioned HIA principles. Investigating the HIA principles from peer-reviewed papers, we found 14 issues. These were, considering of general features in planning and conducting HIAs such as HIA stream, level, timing and type, considering of the wider socio-political and economic context, considering of economic, technical and legal aspects of HIA and capacities for HIA, rationality and comprehensiveness, using appropriate evidence, elaborating on HIA relation to other forms of Impact Assessment, considering of equity, and encouraging intersectoral and interdisciplinary cooperation, involvement of stakeholders and transparency as underlying principles to guide HIA practice. The results emphasize how critical these technical as well as tactical considerations are in the early scoping step of an HIA which plans the conduct of the HIA in reponse to local contextual issues. Conclusion Determining the principles of HIA from

Investigating underlying principles to guide health impact assessment.

Science.gov (United States)

Fakhri, Ali; Maleki, Mohammadreza; Gohari, Mahmoodreza; Harris, Patrick

2014-06-01

Many countries conduct Health Impact Assessment (HIA) of their projects and policies to predict their positive and negative health impacts. In recent years many guides have been developed to inform HIA practice, largely reflecting local developments in HIA. These guides have often been designed for specific contexts and specific need, making the choice between guides difficult. The objective of the current study is to identify underlying principles in order to guide HIA practice in Iran. This study was conducted in three stages: 1) Studies comparing HIA guidelines were reviewed to identify criteria used for comparison seeking emphasized principles. 2) The HIA characteristics extracted from published papers were categorized in order to determine the principles that could guide HIA practice. 3) Finally, these principles were agreed by experts using nominal group technique. The review of the studies comparing HIA guides demonstrated there are no clear comparison criteria for reviewing HIA guides and no study mentioned HIA principles. Investigating the HIA principles from peer-reviewed papers, we found 14 issues. These were, considering of general features in planning and conducting HIAs such as HIA stream, level, timing and type, considering of the wider socio-political and economic context, considering of economic, technical and legal aspects of HIA and capacities for HIA, rationality and comprehensiveness, using appropriate evidence, elaborating on HIA relation to other forms of Impact Assessment, considering of equity, and encouraging intersectoral and interdisciplinary cooperation, involvement of stakeholders and transparency as underlying principles to guide HIA practice. The results emphasize how critical these technical as well as tactical considerations are in the early scoping step of an HIA which plans the conduct of the HIA in reponse to local contextual issues. Determining the principles of HIA from peer-reviewed papers provides an opportunity for guiding

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

Energy Technology Data Exchange (ETDEWEB)

Fredrickson, Daniel C [Univ. of Wisconsin, Madison, WI (United States)

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

Do Adolescent Developmental Issues Disappear Overnight? Reflections about Holistic Development in University Students

Directory of Open Access Journals (Sweden)

Daniel T. L. Shek

2011-01-01

Full Text Available Adolescent developmental issues, such as mental health problems, substance abuse, and egocentric behavior, of university students are examined. This conceptual review generally shows that although there are related issues among university students deserving greater attention, there is a general lack of systematic prevention or positive youth development programs adopting the principle of universal prevention. In contrast to the abundance of universal adolescent prevention and positive youth development programs specifically designed for high school students, similar programs are grossly lacking in the university educational context. This paper highlights the factors contributing to such negligence in university education and the possible strategies that can be adopted to help university students develop in a holistic manner.

The 4th Thermodynamic Principle?

International Nuclear Information System (INIS)

Montero Garcia, Jose de la Luz; Novoa Blanco, Jesus Francisco

2007-01-01

It should be emphasized that the 4th Principle above formulated is a thermodynamic principle and, at the same time, is mechanical-quantum and relativist, as it should inevitably be and its absence has been one of main the theoretical limitations of the physical theory until today.We show that the theoretical discovery of Dimensional Primitive Octet of Matter, the 4th Thermodynamic Principle, the Quantum Hexet of Matter, the Global Hexagonal Subsystem of Fundamental Constants of Energy and the Measurement or Connected Global Scale or Universal Existential Interval of the Matter is that it is possible to be arrived at a global formulation of the four 'forces' or fundamental interactions of nature. The Einstein's golden dream is possible

Harm reduction principles for healthcare settings

Directory of Open Access Journals (Sweden)

Mary Hawk

2017-10-01

Full Text Available Abstract Background Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Methods Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. Results We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. Conclusion This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of

Harm reduction principles for healthcare settings.

Science.gov (United States)

Hawk, Mary; Coulter, Robert W S; Egan, James E; Fisk, Stuart; Reuel Friedman, M; Tula, Monique; Kinsky, Suzanne

2017-10-24

Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of their disclosure of negative health behaviors, given that health

Can the Copernican principle be tested using the cosmic neutrino background?

International Nuclear Information System (INIS)

Jia, Junji; Zhang, Hongbao

2008-01-01

The Copernican principle, stating that we do not occupy any special place in our universe, is usually taken for granted in modern cosmology. However recent observational supernova data indicate that we may live in the under-dense center of our universe, which challenges the Copernican principle. It thus becomes urgent and important to test the Copernican principle via cosmological observations. Taking into account that unlike cosmic photons, cosmic neutrinos of different energies come from different places to us, along different worldlines, we here propose using the cosmic neutrino background as a test of the Copernican principle. It is shown that from the theoretical perspective, the cosmic neutrino background can allow one to determine whether the Copernican principle is valid or not, but to implement such an observation, larger neutrino detectors are called for

Testing the principle of equivalence by solar neutrinos

International Nuclear Information System (INIS)

Minakata, Hisakazu; Washington Univ., Seattle, WA; Nunokawa, Hiroshi; Washington Univ., Seattle, WA

1994-04-01

We discuss the possibility of testing the principle of equivalence with solar neutrinos. If there exists a violation of the equivalence principle quarks and leptons with different flavors may not universally couple with gravity. The method we discuss employs a quantum mechanical phenomenon of neutrino oscillation to probe into the non-university of the gravitational couplings of neutrinos. We develop an appropriate formalism to deal with neutrino propagation under the weak gravitational fields of the sun in the presence of the flavor mixing. We point out that solar neutrino observation by the next generation water Cherenkov detectors can improve the existing bound on violation of the equivalence principle by 3-4 orders of magnitude if the nonadiabatic Mikheyev-Smirnov-Wolfenstein mechanism is the solution to the solar neutrino problem

Safety philosophy and design principles for systems and components of nuclear power plant: external event

International Nuclear Information System (INIS)

Lopes, J.P.G.

1986-01-01

In nuclear power plants, some systems and components are designed to withstand external impacts. Such systems and components are those which have to perform their functions even during and after the occurrences of an earthquake, for example, fulfilling the safety objectives and avoiding the release of radioactive material to the environment. The aim of this report is to introduce the safety philosophy and design principles for systems/components to perform their functions during and after the occurrence of an earthquake, as applied by NUCLEN for Angra 2 and 3. (Author) [pt

Financial Report of Ontario Universities, 1993-94. Volume I - Universities.

Science.gov (United States)

Council of Ontario Universities, Toronto.

This report provides detailed financial information for provincially-assisted colleges and universities in Ontario (Canada) for the fiscal year ended April 30, 1994. It describes university accounting procedures, principles for reporting financial data, and definitions. Nine tables provide summary information on revenue, expenses, fund balances,…

Financial Report of Ontario Universities 1996-97. Volume I-Universities.

Science.gov (United States)

Council of Ontario Universities, Toronto.

This annual report presents 1996-97 financial information on 20 degree-granting universities and related institutions in Ontario, Canada. The report first explains the general guidelines and reporting requirements used in compiling the report, including university accounting procedures, the principles of fund accounting involved, and definitions…

Fluid dynamics of packed columns principles of the fluid dynamic design of columns for gas/liquid and liquid/liquid systems

CERN Document Server

Mackowiak, Jerzy

2010-01-01

This book describes the basic design principles of columns equipped with modern lattice packings and structured packed beds, as generally used in industry. It provides support to engineers as well as graduate students in their daily design work.

Algorithmic Principles of Mathematical Programming

NARCIS (Netherlands)

Faigle, Ulrich; Kern, Walter; Still, Georg

2002-01-01

Algorithmic Principles of Mathematical Programming investigates the mathematical structures and principles underlying the design of efficient algorithms for optimization problems. Recent advances in algorithmic theory have shown that the traditionally separate areas of discrete optimization, linear

The several faces of the cosmological principle

Energy Technology Data Exchange (ETDEWEB)

Beisbart, Claus [TU Dortmund (Germany). Fakultaet 14, Institut fuer Philosophie und Politikwissenschaft

2010-07-01

Much work in relativistic cosmology relies upon the cosmological principle. Very roughly, this principle has it hat the universe is spatially homogeneous and isotropic. However, if the principle is to do some work, it has to be rendered more precise. The aim of this talk is to show that such a precification significantly depends on the theoretical framework adopted and on its ontology. Moreover, it is shown that present-day cosmology uses the principle in different versions that do not fit together nicely. Whereas, in theoretical cosmology, the principle is spelt out as a requirement on space-time manifolds, observational cosmology cashes out the principle using the notion of a random process. I point out some philosophical problems that arise in this context. My conclusion is that the cosmological principle is not a very precise hypothesis, but rather a rough idea that has several faces in contemporary cosmology.